diff options
Diffstat (limited to 'arch')
960 files changed, 33575 insertions, 26438 deletions
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig index 91dbb2757af..5ede5460c80 100644 --- a/arch/arc/Kconfig +++ b/arch/arc/Kconfig @@ -35,6 +35,12 @@ config ARC select PERF_USE_VMALLOC select HAVE_DEBUG_STACKOVERFLOW +config TRACE_IRQFLAGS_SUPPORT + def_bool y + +config LOCKDEP_SUPPORT + def_bool y + config SCHED_OMIT_FRAME_POINTER def_bool y @@ -130,17 +136,14 @@ if SMP config ARC_HAS_COH_CACHES def_bool n -config ARC_HAS_COH_RTSC - def_bool n - config ARC_HAS_REENTRANT_IRQ_LV2 def_bool n endif config NR_CPUS - int "Maximum number of CPUs (2-32)" - range 2 32 + int "Maximum number of CPUs (2-4096)" + range 2 4096 depends on SMP default "2" @@ -326,8 +329,7 @@ config ARC_HAS_RTSC bool "Insn: RTSC (64-bit r/o cycle counter)" default y depends on ARC_CPU_REL_4_10 - # if SMP, enable RTSC only if counter is coherent across cores - depends on !SMP || ARC_HAS_COH_RTSC + depends on !SMP endmenu # "ARC CPU Configuration" diff --git a/arch/arc/configs/fpga_defconfig b/arch/arc/configs/fpga_defconfig index 4ca50f1f8d0..e283aa58693 100644 --- a/arch/arc/configs/fpga_defconfig +++ b/arch/arc/configs/fpga_defconfig @@ -2,6 +2,8 @@ CONFIG_CROSS_COMPILE="arc-linux-uclibc-" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_DEFAULT_HOSTNAME="ARCLinux" # CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y @@ -62,4 +64,5 @@ CONFIG_TMPFS=y CONFIG_NFS_FS=y # CONFIG_ENABLE_WARN_DEPRECATED is not set # CONFIG_ENABLE_MUST_CHECK is not set +# CONFIG_DEBUG_PREEMPT is not set CONFIG_XZ_DEC=y diff --git a/arch/arc/include/asm/cache.h b/arch/arc/include/asm/cache.h index e4abdaac6f9..2fd3162ec4d 100644 --- a/arch/arc/include/asm/cache.h +++ b/arch/arc/include/asm/cache.h @@ -17,13 +17,7 @@ #endif #define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) - -/* For a rare case where customers have differently config I/D */ -#define ARC_ICACHE_LINE_LEN L1_CACHE_BYTES -#define ARC_DCACHE_LINE_LEN L1_CACHE_BYTES - -#define ICACHE_LINE_MASK (~(ARC_ICACHE_LINE_LEN - 1)) -#define DCACHE_LINE_MASK (~(ARC_DCACHE_LINE_LEN - 1)) +#define CACHE_LINE_MASK (~(L1_CACHE_BYTES - 1)) /* * ARC700 doesn't cache any access in top 256M. diff --git a/arch/arc/include/asm/irq.h b/arch/arc/include/asm/irq.h index c0a72105ee0..291a70db68b 100644 --- a/arch/arc/include/asm/irq.h +++ b/arch/arc/include/asm/irq.h @@ -18,8 +18,8 @@ #include <asm-generic/irq.h> -extern void __init arc_init_IRQ(void); -extern int __init get_hw_config_num_irq(void); +extern void arc_init_IRQ(void); +extern int get_hw_config_num_irq(void); void arc_local_timer_setup(unsigned int cpu); diff --git a/arch/arc/include/asm/irqflags.h b/arch/arc/include/asm/irqflags.h index b68b53f458d..cb7efc29f16 100644 --- a/arch/arc/include/asm/irqflags.h +++ b/arch/arc/include/asm/irqflags.h @@ -151,16 +151,38 @@ static inline void arch_unmask_irq(unsigned int irq) #else +#ifdef CONFIG_TRACE_IRQFLAGS + +.macro TRACE_ASM_IRQ_DISABLE + bl trace_hardirqs_off +.endm + +.macro TRACE_ASM_IRQ_ENABLE + bl trace_hardirqs_on +.endm + +#else + +.macro TRACE_ASM_IRQ_DISABLE +.endm + +.macro TRACE_ASM_IRQ_ENABLE +.endm + +#endif + .macro IRQ_DISABLE scratch lr \scratch, [status32] bic \scratch, \scratch, (STATUS_E1_MASK | STATUS_E2_MASK) flag \scratch + TRACE_ASM_IRQ_DISABLE .endm .macro IRQ_ENABLE scratch lr \scratch, [status32] or \scratch, \scratch, (STATUS_E1_MASK | STATUS_E2_MASK) flag \scratch + TRACE_ASM_IRQ_ENABLE .endm #endif /* __ASSEMBLY__ */ diff --git a/arch/arc/include/asm/mmu.h b/arch/arc/include/asm/mmu.h index c2663b32866..8c84ae98c33 100644 --- a/arch/arc/include/asm/mmu.h +++ b/arch/arc/include/asm/mmu.h @@ -48,7 +48,7 @@ #ifndef __ASSEMBLY__ typedef struct { - unsigned long asid; /* 8 bit MMU PID + Generation cycle */ + unsigned long asid[NR_CPUS]; /* 8 bit MMU PID + Generation cycle */ } mm_context_t; #ifdef CONFIG_ARC_DBG_TLB_PARANOIA diff --git a/arch/arc/include/asm/mmu_context.h b/arch/arc/include/asm/mmu_context.h index 43a1b51bb8c..1fd467ef658 100644 --- a/arch/arc/include/asm/mmu_context.h +++ b/arch/arc/include/asm/mmu_context.h @@ -30,13 +30,13 @@ * "Fast Context Switch" i.e. no TLB flush on ctxt-switch * * Linux assigns each task a unique ASID. A simple round-robin allocation - * of H/w ASID is done using software tracker @asid_cache. + * of H/w ASID is done using software tracker @asid_cpu. * When it reaches max 255, the allocation cycle starts afresh by flushing * the entire TLB and wrapping ASID back to zero. * * A new allocation cycle, post rollover, could potentially reassign an ASID * to a different task. Thus the rule is to refresh the ASID in a new cycle. - * The 32 bit @asid_cache (and mm->asid) have 8 bits MMU PID and rest 24 bits + * The 32 bit @asid_cpu (and mm->asid) have 8 bits MMU PID and rest 24 bits * serve as cycle/generation indicator and natural 32 bit unsigned math * automagically increments the generation when lower 8 bits rollover. */ @@ -47,9 +47,11 @@ #define MM_CTXT_FIRST_CYCLE (MM_CTXT_ASID_MASK + 1) #define MM_CTXT_NO_ASID 0UL -#define hw_pid(mm) (mm->context.asid & MM_CTXT_ASID_MASK) +#define asid_mm(mm, cpu) mm->context.asid[cpu] +#define hw_pid(mm, cpu) (asid_mm(mm, cpu) & MM_CTXT_ASID_MASK) -extern unsigned int asid_cache; +DECLARE_PER_CPU(unsigned int, asid_cache); +#define asid_cpu(cpu) per_cpu(asid_cache, cpu) /* * Get a new ASID if task doesn't have a valid one (unalloc or from prev cycle) @@ -57,6 +59,7 @@ extern unsigned int asid_cache; */ static inline void get_new_mmu_context(struct mm_struct *mm) { + const unsigned int cpu = smp_processor_id(); unsigned long flags; local_irq_save(flags); @@ -71,28 +74,28 @@ static inline void get_new_mmu_context(struct mm_struct *mm) * first need to destroy the context, setting it to invalid * value. */ - if (!((mm->context.asid ^ asid_cache) & MM_CTXT_CYCLE_MASK)) + if (!((asid_mm(mm, cpu) ^ asid_cpu(cpu)) & MM_CTXT_CYCLE_MASK)) goto set_hw; /* move to new ASID and handle rollover */ - if (unlikely(!(++asid_cache & MM_CTXT_ASID_MASK))) { + if (unlikely(!(++asid_cpu(cpu) & MM_CTXT_ASID_MASK))) { - flush_tlb_all(); + local_flush_tlb_all(); /* * Above checke for rollover of 8 bit ASID in 32 bit container. * If the container itself wrapped around, set it to a non zero * "generation" to distinguish from no context */ - if (!asid_cache) - asid_cache = MM_CTXT_FIRST_CYCLE; + if (!asid_cpu(cpu)) + asid_cpu(cpu) = MM_CTXT_FIRST_CYCLE; } /* Assign new ASID to tsk */ - mm->context.asid = asid_cache; + asid_mm(mm, cpu) = asid_cpu(cpu); set_hw: - write_aux_reg(ARC_REG_PID, hw_pid(mm) | MMU_ENABLE); + write_aux_reg(ARC_REG_PID, hw_pid(mm, cpu) | MMU_ENABLE); local_irq_restore(flags); } @@ -104,16 +107,45 @@ set_hw: static inline int init_new_context(struct task_struct *tsk, struct mm_struct *mm) { - mm->context.asid = MM_CTXT_NO_ASID; + int i; + + for_each_possible_cpu(i) + asid_mm(mm, i) = MM_CTXT_NO_ASID; + return 0; } +static inline void destroy_context(struct mm_struct *mm) +{ + unsigned long flags; + + /* Needed to elide CONFIG_DEBUG_PREEMPT warning */ + local_irq_save(flags); + asid_mm(mm, smp_processor_id()) = MM_CTXT_NO_ASID; + local_irq_restore(flags); +} + /* Prepare the MMU for task: setup PID reg with allocated ASID If task doesn't have an ASID (never alloc or stolen, get a new ASID) */ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, struct task_struct *tsk) { + const int cpu = smp_processor_id(); + + /* + * Note that the mm_cpumask is "aggregating" only, we don't clear it + * for the switched-out task, unlike some other arches. + * It is used to enlist cpus for sending TLB flush IPIs and not sending + * it to CPUs where a task once ran-on, could cause stale TLB entry + * re-use, specially for a multi-threaded task. + * e.g. T1 runs on C1, migrates to C3. T2 running on C2 munmaps. + * For a non-aggregating mm_cpumask, IPI not sent C1, and if T1 + * were to re-migrate to C1, it could access the unmapped region + * via any existing stale TLB entries. + */ + cpumask_set_cpu(cpu, mm_cpumask(next)); + #ifndef CONFIG_SMP /* PGD cached in MMU reg to avoid 3 mem lookups: task->mm->pgd */ write_aux_reg(ARC_REG_SCRATCH_DATA0, next->pgd); @@ -131,11 +163,6 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, */ #define activate_mm(prev, next) switch_mm(prev, next, NULL) -static inline void destroy_context(struct mm_struct *mm) -{ - mm->context.asid = MM_CTXT_NO_ASID; -} - /* it seemed that deactivate_mm( ) is a reasonable place to do book-keeping * for retiring-mm. However destroy_context( ) still needs to do that because * between mm_release( ) = >deactive_mm( ) and diff --git a/arch/arc/include/asm/setup.h b/arch/arc/include/asm/setup.h index 229e5068149..e10f8cef56a 100644 --- a/arch/arc/include/asm/setup.h +++ b/arch/arc/include/asm/setup.h @@ -31,7 +31,7 @@ struct cpuinfo_data { extern int root_mountflags, end_mem; extern int running_on_hw; -void __init setup_processor(void); +void setup_processor(void); void __init setup_arch_memory(void); #endif /* __ASMARC_SETUP_H */ diff --git a/arch/arc/include/asm/smp.h b/arch/arc/include/asm/smp.h index c4fb211dcd2..eefc29f08cd 100644 --- a/arch/arc/include/asm/smp.h +++ b/arch/arc/include/asm/smp.h @@ -30,7 +30,7 @@ extern void arch_send_call_function_ipi_mask(const struct cpumask *mask); * APIs provided by arch SMP code to rest of arch code */ extern void __init smp_init_cpus(void); -extern void __init first_lines_of_secondary(void); +extern void first_lines_of_secondary(void); extern const char *arc_platform_smp_cpuinfo(void); /* diff --git a/arch/arc/include/asm/tlbflush.h b/arch/arc/include/asm/tlbflush.h index b2f9bc7f68c..71c7b2e4b87 100644 --- a/arch/arc/include/asm/tlbflush.h +++ b/arch/arc/include/asm/tlbflush.h @@ -18,11 +18,18 @@ void local_flush_tlb_kernel_range(unsigned long start, unsigned long end); void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end); -/* XXX: Revisit for SMP */ +#ifndef CONFIG_SMP #define flush_tlb_range(vma, s, e) local_flush_tlb_range(vma, s, e) #define flush_tlb_page(vma, page) local_flush_tlb_page(vma, page) #define flush_tlb_kernel_range(s, e) local_flush_tlb_kernel_range(s, e) #define flush_tlb_all() local_flush_tlb_all() #define flush_tlb_mm(mm) local_flush_tlb_mm(mm) - +#else +extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, + unsigned long end); +extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long page); +extern void flush_tlb_kernel_range(unsigned long start, unsigned long end); +extern void flush_tlb_all(void); +extern void flush_tlb_mm(struct mm_struct *mm); +#endif /* CONFIG_SMP */ #endif diff --git a/arch/arc/include/asm/unaligned.h b/arch/arc/include/asm/unaligned.h index 60702f3751d..3e5f071bc00 100644 --- a/arch/arc/include/asm/unaligned.h +++ b/arch/arc/include/asm/unaligned.h @@ -22,7 +22,8 @@ static inline int misaligned_fixup(unsigned long address, struct pt_regs *regs, struct callee_regs *cregs) { - return 0; + /* Not fixed */ + return 1; } #endif diff --git a/arch/arc/kernel/ctx_sw.c b/arch/arc/kernel/ctx_sw.c index 34410eb1a30..c14a5bea0c7 100644 --- a/arch/arc/kernel/ctx_sw.c +++ b/arch/arc/kernel/ctx_sw.c @@ -17,6 +17,8 @@ #include <asm/asm-offsets.h> #include <linux/sched.h> +#define KSP_WORD_OFF ((TASK_THREAD + THREAD_KSP) / 4) + struct task_struct *__sched __switch_to(struct task_struct *prev_task, struct task_struct *next_task) { @@ -45,7 +47,16 @@ __switch_to(struct task_struct *prev_task, struct task_struct *next_task) #endif /* set ksp of outgoing task in tsk->thread.ksp */ +#if KSP_WORD_OFF <= 255 "st.as sp, [%3, %1] \n\t" +#else + /* + * Workaround for NR_CPUS=4k + * %1 is bigger than 255 (S9 offset for st.as) + */ + "add2 r24, %3, %1 \n\t" + "st sp, [r24] \n\t" +#endif "sync \n\t" @@ -97,7 +108,7 @@ __switch_to(struct task_struct *prev_task, struct task_struct *next_task) /* FP/BLINK restore generated by gcc (standard func epilogue */ : "=r"(tmp) - : "n"((TASK_THREAD + THREAD_KSP) / 4), "r"(next), "r"(prev) + : "n"(KSP_WORD_OFF), "r"(next), "r"(prev) : "blink" ); diff --git a/arch/arc/kernel/ctx_sw_asm.S b/arch/arc/kernel/ctx_sw_asm.S index d8972345e4c..65690e7fcc8 100644 --- a/arch/arc/kernel/ctx_sw_asm.S +++ b/arch/arc/kernel/ctx_sw_asm.S @@ -14,6 +14,8 @@ #include <asm/asm-offsets.h> #include <asm/linkage.h> +#define KSP_WORD_OFF ((TASK_THREAD + THREAD_KSP) / 4) + ;################### Low Level Context Switch ########################## .section .sched.text,"ax",@progbits @@ -28,8 +30,13 @@ __switch_to: SAVE_CALLEE_SAVED_KERNEL /* Save the now KSP in task->thread.ksp */ - st.as sp, [r0, (TASK_THREAD + THREAD_KSP)/4] - +#if KSP_WORD_OFF <= 255 + st.as sp, [r0, KSP_WORD_OFF] +#else + /* Workaround for NR_CPUS=4k as ST.as can only take s9 offset */ + add2 r24, r0, KSP_WORD_OFF + st sp, [r24] +#endif /* * Return last task in r0 (return reg) * On ARC, Return reg = First Arg reg = r0. diff --git a/arch/arc/kernel/entry.S b/arch/arc/kernel/entry.S index b908dde8a33..47d09d07f09 100644 --- a/arch/arc/kernel/entry.S +++ b/arch/arc/kernel/entry.S @@ -250,6 +250,14 @@ ARC_ENTRY handle_interrupt_level1 lr r0, [icause1] and r0, r0, 0x1f +#ifdef CONFIG_TRACE_IRQFLAGS + ; icause1 needs to be read early, before calling tracing, which + ; can clobber scratch regs, hence use of stack to stash it + push r0 + TRACE_ASM_IRQ_DISABLE + pop r0 +#endif + bl.d @arch_do_IRQ mov r1, sp @@ -337,9 +345,9 @@ ARC_ENTRY EV_TLBProtV ; vineetg: Mar 6th: Random Seg Fault issue #1 ; ecr and efa were not saved in case an Intr sneaks in ; after fake rtie - ; + lr r2, [ecr] - lr r1, [efa] ; Faulting Data address + lr r0, [efa] ; Faulting Data address ; --------(4) Return from CPU Exception Mode --------- ; Fake a rtie, but rtie to next label @@ -348,6 +356,8 @@ ARC_ENTRY EV_TLBProtV FAKE_RET_FROM_EXCPN r9 + mov r1, sp + ;------ (5) Type of Protection Violation? ---------- ; ; ProtV Hardware Exception is triggered for Access Faults of 2 types @@ -358,16 +368,12 @@ ARC_ENTRY EV_TLBProtV bbit1 r2, ECR_C_BIT_PROTV_MISALIG_DATA, 4f ;========= (6a) Access Violation Processing ======== - mov r0, sp ; pt_regs bl do_page_fault b ret_from_exception ;========== (6b) Non aligned access ============ 4: - mov r0, r1 - mov r1, sp ; pt_regs -#ifdef CONFIG_ARC_MISALIGN_ACCESS SAVE_CALLEE_SAVED_USER mov r2, sp ; callee_regs @@ -376,9 +382,6 @@ ARC_ENTRY EV_TLBProtV ; TBD: optimize - do this only if a callee reg was involved ; either a dst of emulated LD/ST or src with address-writeback RESTORE_CALLEE_SAVED_USER -#else - bl do_misaligned_error -#endif b ret_from_exception @@ -575,6 +578,7 @@ resume_user_mode_begin: ; --- (Slow Path #2) pending signal --- mov r0, sp ; pt_regs for arg to do_signal()/do_notify_resume() + GET_CURR_THR_INFO_FLAGS r9 bbit0 r9, TIF_SIGPENDING, .Lchk_notify_resume ; Normal Trap/IRQ entry only saves Scratch (caller-saved) regs @@ -640,6 +644,8 @@ resume_kernel_mode: restore_regs : + TRACE_ASM_IRQ_ENABLE + lr r10, [status32] ; Restore REG File. In case multiple Events outstanding, diff --git a/arch/arc/kernel/head.S b/arch/arc/kernel/head.S index 0f944f02451..2c878e964a6 100644 --- a/arch/arc/kernel/head.S +++ b/arch/arc/kernel/head.S @@ -95,7 +95,7 @@ stext: ;---------------------------------------------------------------- ; First lines of code run by secondary before jumping to 'C' ;---------------------------------------------------------------- - .section .init.text, "ax",@progbits + .section .text, "ax",@progbits .type first_lines_of_secondary, @function .globl first_lines_of_secondary diff --git a/arch/arc/kernel/irq.c b/arch/arc/kernel/irq.c index 5fc92455da3..a4b141ee9a6 100644 --- a/arch/arc/kernel/irq.c +++ b/arch/arc/kernel/irq.c @@ -39,10 +39,14 @@ void arc_init_IRQ(void) level_mask |= IS_ENABLED(CONFIG_ARC_IRQ5_LV2) << 5; level_mask |= IS_ENABLED(CONFIG_ARC_IRQ6_LV2) << 6; - if (level_mask) { + /* + * Write to register, even if no LV2 IRQs configured to reset it + * in case bootloader had mucked with it + */ + write_aux_reg(AUX_IRQ_LEV, level_mask); + + if (level_mask) pr_info("Level-2 interrupts bitset %x\n", level_mask); - write_aux_reg(AUX_IRQ_LEV, level_mask); - } } /* @@ -146,7 +150,7 @@ void arch_do_IRQ(unsigned int irq, struct pt_regs *regs) set_irq_regs(old_regs); } -int __init get_hw_config_num_irq(void) +int get_hw_config_num_irq(void) { uint32_t val = read_aux_reg(ARC_REG_VECBASE_BCR); diff --git a/arch/arc/kernel/kgdb.c b/arch/arc/kernel/kgdb.c index a7698fb1481..a2ff5c5d145 100644 --- a/arch/arc/kernel/kgdb.c +++ b/arch/arc/kernel/kgdb.c @@ -196,6 +196,18 @@ void kgdb_arch_set_pc(struct pt_regs *regs, unsigned long ip) instruction_pointer(regs) = ip; } +static void kgdb_call_nmi_hook(void *ignored) +{ + kgdb_nmicallback(raw_smp_processor_id(), NULL); +} + +void kgdb_roundup_cpus(unsigned long flags) +{ + local_irq_enable(); + smp_call_function(kgdb_call_nmi_hook, NULL, 0); + local_irq_disable(); +} + struct kgdb_arch arch_kgdb_ops = { /* breakpoint instruction: TRAP_S 0x3 */ #ifdef CONFIG_CPU_BIG_ENDIAN diff --git a/arch/arc/kernel/kprobes.c b/arch/arc/kernel/kprobes.c index 72f97822784..eb1c2ee5eaf 100644 --- a/arch/arc/kernel/kprobes.c +++ b/arch/arc/kernel/kprobes.c @@ -87,13 +87,13 @@ static void __kprobes save_previous_kprobe(struct kprobe_ctlblk *kcb) static void __kprobes restore_previous_kprobe(struct kprobe_ctlblk *kcb) { - __get_cpu_var(current_kprobe) = kcb->prev_kprobe.kp; + __this_cpu_write(current_kprobe, kcb->prev_kprobe.kp); kcb->kprobe_status = kcb->prev_kprobe.status; } static inline void __kprobes set_current_kprobe(struct kprobe *p) { - __get_cpu_var(current_kprobe) = p; + __this_cpu_write(current_kprobe, p); } static void __kprobes resume_execution(struct kprobe *p, unsigned long addr, @@ -237,7 +237,7 @@ int __kprobes arc_kprobe_handler(unsigned long addr, struct pt_regs *regs) return 1; } else if (kprobe_running()) { - p = __get_cpu_var(current_kprobe); + p = __this_cpu_read(current_kprobe); if (p->break_handler && p->break_handler(p, regs)) { setup_singlestep(p, regs); kcb->kprobe_status = KPROBE_HIT_SS; diff --git a/arch/arc/kernel/reset.c b/arch/arc/kernel/reset.c index e227a2b1c94..2768fa1e39b 100644 --- a/arch/arc/kernel/reset.c +++ b/arch/arc/kernel/reset.c @@ -31,3 +31,4 @@ void machine_power_off(void) } void (*pm_power_off) (void) = NULL; +EXPORT_SYMBOL(pm_power_off); diff --git a/arch/arc/kernel/setup.c b/arch/arc/kernel/setup.c index 2c68bc7e6a7..d9e15f16633 100644 --- a/arch/arc/kernel/setup.c +++ b/arch/arc/kernel/setup.c @@ -37,8 +37,7 @@ struct task_struct *_current_task[NR_CPUS]; /* For stack switching */ struct cpuinfo_arc cpuinfo_arc700[NR_CPUS]; - -void read_arc_build_cfg_regs(void) +static void read_arc_build_cfg_regs(void) { struct bcr_perip uncached_space; struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()]; @@ -106,7 +105,7 @@ static const struct cpuinfo_data arc_cpu_tbl[] = { { {0x00, NULL } } }; -char *arc_cpu_mumbojumbo(int cpu_id, char *buf, int len) +static char *arc_cpu_mumbojumbo(int cpu_id, char *buf, int len) { int n = 0; struct cpuinfo_arc *cpu = &cpuinfo_arc700[cpu_id]; @@ -171,7 +170,7 @@ static const struct id_to_str mac_mul_nm[] = { {0x6, "Dual 16x16 and 32x16"} }; -char *arc_extn_mumbojumbo(int cpu_id, char *buf, int len) +static char *arc_extn_mumbojumbo(int cpu_id, char *buf, int len) { int n = 0; struct cpuinfo_arc *cpu = &cpuinfo_arc700[cpu_id]; @@ -234,7 +233,7 @@ char *arc_extn_mumbojumbo(int cpu_id, char *buf, int len) return buf; } -void arc_chk_ccms(void) +static void arc_chk_ccms(void) { #if defined(CONFIG_ARC_HAS_DCCM) || defined(CONFIG_ARC_HAS_ICCM) struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()]; @@ -269,7 +268,7 @@ void arc_chk_ccms(void) * hardware has dedicated regs which need to be saved/restored on ctx-sw * (Single Precision uses core regs), thus kernel is kind of oblivious to it */ -void arc_chk_fpu(void) +static void arc_chk_fpu(void) { struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()]; diff --git a/arch/arc/kernel/smp.c b/arch/arc/kernel/smp.c index bca3052c956..c2f9ebbc38f 100644 --- a/arch/arc/kernel/smp.c +++ b/arch/arc/kernel/smp.c @@ -95,7 +95,7 @@ void __init smp_cpus_done(unsigned int max_cpus) * If it turns out to be elaborate, it's better to code it in assembly * */ -void __attribute__((weak)) arc_platform_smp_wait_to_boot(int cpu) +void __weak arc_platform_smp_wait_to_boot(int cpu) { /* * As a hack for debugging - since debugger will single-step over the @@ -128,6 +128,7 @@ void start_kernel_secondary(void) atomic_inc(&mm->mm_users); atomic_inc(&mm->mm_count); current->active_mm = mm; + cpumask_set_cpu(cpu, mm_cpumask(mm)); notify_cpu_starting(cpu); set_cpu_online(cpu, true); @@ -210,7 +211,6 @@ enum ipi_msg_type { IPI_NOP = 0, IPI_RESCHEDULE = 1, IPI_CALL_FUNC, - IPI_CALL_FUNC_SINGLE, IPI_CPU_STOP }; @@ -254,7 +254,7 @@ void smp_send_stop(void) void arch_send_call_function_single_ipi(int cpu) { - ipi_send_msg(cpumask_of(cpu), IPI_CALL_FUNC_SINGLE); + ipi_send_msg(cpumask_of(cpu), IPI_CALL_FUNC); } void arch_send_call_function_ipi_mask(const struct cpumask *mask) @@ -286,10 +286,6 @@ static inline void __do_IPI(unsigned long *ops, struct ipi_data *ipi, int cpu) generic_smp_call_function_interrupt(); break; - case IPI_CALL_FUNC_SINGLE: - generic_smp_call_function_single_interrupt(); - break; - case IPI_CPU_STOP: ipi_cpu_stop(cpu); break; diff --git a/arch/arc/kernel/stacktrace.c b/arch/arc/kernel/stacktrace.c index f8b7d880304..9ce47cfe230 100644 --- a/arch/arc/kernel/stacktrace.c +++ b/arch/arc/kernel/stacktrace.c @@ -237,11 +237,14 @@ unsigned int get_wchan(struct task_struct *tsk) */ void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace) { + /* Assumes @tsk is sleeping so unwinds from __switch_to */ arc_unwind_core(tsk, NULL, __collect_all_but_sched, trace); } void save_stack_trace(struct stack_trace *trace) { - arc_unwind_core(current, NULL, __collect_all, trace); + /* Pass NULL for task so it unwinds the current call frame */ + arc_unwind_core(NULL, NULL, __collect_all, trace); } +EXPORT_SYMBOL_GPL(save_stack_trace); #endif diff --git a/arch/arc/kernel/time.c b/arch/arc/kernel/time.c index 3fde7de3ea6..e5f3a837fb3 100644 --- a/arch/arc/kernel/time.c +++ b/arch/arc/kernel/time.c @@ -63,9 +63,10 @@ int arc_counter_setup(void) { - /* RTSC insn taps into cpu clk, needs no setup */ - - /* For SMP, only allowed if cross-core-sync, hence usable as cs */ + /* + * For SMP this needs to be 0. However Kconfig glue doesn't + * enable this option for SMP configs + */ return 1; } @@ -206,7 +207,7 @@ static DEFINE_PER_CPU(struct clock_event_device, arc_clockevent_device) = { static irqreturn_t timer_irq_handler(int irq, void *dev_id) { - struct clock_event_device *clk = &__get_cpu_var(arc_clockevent_device); + struct clock_event_device *clk = this_cpu_ptr(&arc_clockevent_device); arc_timer_event_ack(clk->mode == CLOCK_EVT_MODE_PERIODIC); clk->event_handler(clk); @@ -223,7 +224,7 @@ static struct irqaction arc_timer_irq = { * Setup the local event timer for @cpu * N.B. weak so that some exotic ARC SoCs can completely override it */ -void __attribute__((weak)) arc_local_timer_setup(unsigned int cpu) +void __weak arc_local_timer_setup(unsigned int cpu) { struct clock_event_device *clk = &per_cpu(arc_clockevent_device, cpu); diff --git a/arch/arc/kernel/traps.c b/arch/arc/kernel/traps.c index e21692d2fda..3eadfdabc32 100644 --- a/arch/arc/kernel/traps.c +++ b/arch/arc/kernel/traps.c @@ -84,19 +84,18 @@ DO_ERROR_INFO(SIGBUS, "Invalid Mem Access", do_memory_error, BUS_ADRERR) DO_ERROR_INFO(SIGTRAP, "Breakpoint Set", trap_is_brkpt, TRAP_BRKPT) DO_ERROR_INFO(SIGBUS, "Misaligned Access", do_misaligned_error, BUS_ADRALN) -#ifdef CONFIG_ARC_MISALIGN_ACCESS /* * Entry Point for Misaligned Data access Exception, for emulating in software */ int do_misaligned_access(unsigned long address, struct pt_regs *regs, struct callee_regs *cregs) { + /* If emulation not enabled, or failed, kill the task */ if (misaligned_fixup(address, regs, cregs) != 0) return do_misaligned_error(address, regs); return 0; } -#endif /* * Entry point for miscll errors such as Nested Exceptions diff --git a/arch/arc/mm/cache_arc700.c b/arch/arc/mm/cache_arc700.c index 5a1259cd948..6b58c1de757 100644 --- a/arch/arc/mm/cache_arc700.c +++ b/arch/arc/mm/cache_arc700.c @@ -182,7 +182,7 @@ void arc_cache_init(void) #ifdef CONFIG_ARC_HAS_ICACHE /* 1. Confirm some of I-cache params which Linux assumes */ - if (ic->line_len != ARC_ICACHE_LINE_LEN) + if (ic->line_len != L1_CACHE_BYTES) panic("Cache H/W doesn't match kernel Config"); if (ic->ver != CONFIG_ARC_MMU_VER) @@ -205,7 +205,7 @@ chk_dc: return; #ifdef CONFIG_ARC_HAS_DCACHE - if (dc->line_len != ARC_DCACHE_LINE_LEN) + if (dc->line_len != L1_CACHE_BYTES) panic("Cache H/W doesn't match kernel Config"); /* check for D-Cache aliasing */ @@ -240,6 +240,67 @@ chk_dc: #define OP_INV 0x1 #define OP_FLUSH 0x2 #define OP_FLUSH_N_INV 0x3 +#define OP_INV_IC 0x4 + +/* + * Common Helper for Line Operations on {I,D}-Cache + */ +static inline void __cache_line_loop(unsigned long paddr, unsigned long vaddr, + unsigned long sz, const int cacheop) +{ + unsigned int aux_cmd, aux_tag; + int num_lines; + const int full_page_op = __builtin_constant_p(sz) && sz == PAGE_SIZE; + + if (cacheop == OP_INV_IC) { + aux_cmd = ARC_REG_IC_IVIL; + aux_tag = ARC_REG_IC_PTAG; + } + else { + /* d$ cmd: INV (discard or wback-n-discard) OR FLUSH (wback) */ + aux_cmd = cacheop & OP_INV ? ARC_REG_DC_IVDL : ARC_REG_DC_FLDL; + aux_tag = ARC_REG_DC_PTAG; + } + + /* Ensure we properly floor/ceil the non-line aligned/sized requests + * and have @paddr - aligned to cache line and integral @num_lines. + * This however can be avoided for page sized since: + * -@paddr will be cache-line aligned already (being page aligned) + * -@sz will be integral multiple of line size (being page sized). + */ + if (!full_page_op) { + sz += paddr & ~CACHE_LINE_MASK; + paddr &= CACHE_LINE_MASK; + vaddr &= CACHE_LINE_MASK; + } + + num_lines = DIV_ROUND_UP(sz, L1_CACHE_BYTES); + +#if (CONFIG_ARC_MMU_VER <= 2) + /* MMUv2 and before: paddr contains stuffed vaddrs bits */ + paddr |= (vaddr >> PAGE_SHIFT) & 0x1F; +#else + /* if V-P const for loop, PTAG can be written once outside loop */ + if (full_page_op) + write_aux_reg(ARC_REG_DC_PTAG, paddr); +#endif + + while (num_lines-- > 0) { +#if (CONFIG_ARC_MMU_VER > 2) + /* MMUv3, cache ops require paddr seperately */ + if (!full_page_op) { + write_aux_reg(aux_tag, paddr); + paddr += L1_CACHE_BYTES; + } + + write_aux_reg(aux_cmd, vaddr); + vaddr += L1_CACHE_BYTES; +#else + write_aux_reg(aux, paddr); + paddr += L1_CACHE_BYTES; +#endif + } +} #ifdef CONFIG_ARC_HAS_DCACHE @@ -289,53 +350,6 @@ static inline void __dc_entire_op(const int cacheop) write_aux_reg(ARC_REG_DC_CTRL, tmp & ~DC_CTRL_INV_MODE_FLUSH); } -/* - * Per Line Operation on D-Cache - * Doesn't deal with type-of-op/IRQ-disabling/waiting-for-flush-to-complete - * It's sole purpose is to help gcc generate ZOL - * (aliasing VIPT dcache flushing needs both vaddr and paddr) - */ -static inline void __dc_line_loop(unsigned long paddr, unsigned long vaddr, - unsigned long sz, const int aux_reg) -{ - int num_lines; - - /* Ensure we properly floor/ceil the non-line aligned/sized requests - * and have @paddr - aligned to cache line and integral @num_lines. - * This however can be avoided for page sized since: - * -@paddr will be cache-line aligned already (being page aligned) - * -@sz will be integral multiple of line size (being page sized). - */ - if (!(__builtin_constant_p(sz) && sz == PAGE_SIZE)) { - sz += paddr & ~DCACHE_LINE_MASK; - paddr &= DCACHE_LINE_MASK; - vaddr &= DCACHE_LINE_MASK; - } - - num_lines = DIV_ROUND_UP(sz, ARC_DCACHE_LINE_LEN); - -#if (CONFIG_ARC_MMU_VER <= 2) - paddr |= (vaddr >> PAGE_SHIFT) & 0x1F; -#endif - - while (num_lines-- > 0) { -#if (CONFIG_ARC_MMU_VER > 2) - /* - * Just as for I$, in MMU v3, D$ ops also require - * "tag" bits in DC_PTAG, "index" bits in FLDL,IVDL ops - */ - write_aux_reg(ARC_REG_DC_PTAG, paddr); - - write_aux_reg(aux_reg, vaddr); - vaddr += ARC_DCACHE_LINE_LEN; -#else - /* paddr contains stuffed vaddrs bits */ - write_aux_reg(aux_reg, paddr); -#endif - paddr += ARC_DCACHE_LINE_LEN; - } -} - /* For kernel mappings cache operation: index is same as paddr */ #define __dc_line_op_k(p, sz, op) __dc_line_op(p, p, sz, op) @@ -346,7 +360,6 @@ static inline void __dc_line_op(unsigned long paddr, unsigned long vaddr, unsigned long sz, const int cacheop) { unsigned long flags, tmp = tmp; - int aux; local_irq_save(flags); @@ -361,12 +374,7 @@ static inline void __dc_line_op(unsigned long paddr, unsigned long vaddr, write_aux_reg(ARC_REG_DC_CTRL, tmp | DC_CTRL_INV_MODE_FLUSH); } - if (cacheop & OP_INV) /* Inv / flush-n-inv use same cmd reg */ - aux = ARC_REG_DC_IVDL; - else - aux = ARC_REG_DC_FLDL; - - __dc_line_loop(paddr, vaddr, sz, aux); + __cache_line_loop(paddr, vaddr, sz, cacheop); if (cacheop & OP_FLUSH) /* flush / flush-n-inv both wait */ wait_for_flush(); @@ -438,42 +446,9 @@ static void __ic_line_inv_vaddr(unsigned long paddr, unsigned long vaddr, unsigned long sz) { unsigned long flags; - int num_lines; - - /* - * Ensure we properly floor/ceil the non-line aligned/sized requests: - * However page sized flushes can be compile time optimised. - * -@paddr will be cache-line aligned already (being page aligned) - * -@sz will be integral multiple of line size (being page sized). - */ - if (!(__builtin_constant_p(sz) && sz == PAGE_SIZE)) { - sz += paddr & ~ICACHE_LINE_MASK; - paddr &= ICACHE_LINE_MASK; - vaddr &= ICACHE_LINE_MASK; - } - - num_lines = DIV_ROUND_UP(sz, ARC_ICACHE_LINE_LEN); - -#if (CONFIG_ARC_MMU_VER <= 2) - /* bits 17:13 of vaddr go as bits 4:0 of paddr */ - paddr |= (vaddr >> PAGE_SHIFT) & 0x1F; -#endif local_irq_save(flags); - while (num_lines-- > 0) { -#if (CONFIG_ARC_MMU_VER > 2) - /* tag comes from phy addr */ - write_aux_reg(ARC_REG_IC_PTAG, paddr); - - /* index bits come from vaddr */ - write_aux_reg(ARC_REG_IC_IVIL, vaddr); - vaddr += ARC_ICACHE_LINE_LEN; -#else - /* paddr contains stuffed vaddrs bits */ - write_aux_reg(ARC_REG_IC_IVIL, paddr); -#endif - paddr += ARC_ICACHE_LINE_LEN; - } + __cache_line_loop(paddr, vaddr, sz, OP_INV_IC); local_irq_restore(flags); } diff --git a/arch/arc/mm/fault.c b/arch/arc/mm/fault.c index d63f3de0cd5..9c69552350c 100644 --- a/arch/arc/mm/fault.c +++ b/arch/arc/mm/fault.c @@ -17,7 +17,7 @@ #include <asm/pgalloc.h> #include <asm/mmu.h> -static int handle_vmalloc_fault(struct mm_struct *mm, unsigned long address) +static int handle_vmalloc_fault(unsigned long address) { /* * Synchronize this task's top level page-table @@ -27,7 +27,7 @@ static int handle_vmalloc_fault(struct mm_struct *mm, unsigned long address) pud_t *pud, *pud_k; pmd_t *pmd, *pmd_k; - pgd = pgd_offset_fast(mm, address); + pgd = pgd_offset_fast(current->active_mm, address); pgd_k = pgd_offset_k(address); if (!pgd_present(*pgd_k)) @@ -52,7 +52,7 @@ bad_area: return 1; } -void do_page_fault(struct pt_regs *regs, unsigned long address) +void do_page_fault(unsigned long address, struct pt_regs *regs) { struct vm_area_struct *vma = NULL; struct task_struct *tsk = current; @@ -72,7 +72,7 @@ void do_page_fault(struct pt_regs *regs, unsigned long address) * nothing more. */ if (address >= VMALLOC_START && address <= VMALLOC_END) { - ret = handle_vmalloc_fault(mm, address); + ret = handle_vmalloc_fault(address); if (unlikely(ret)) goto bad_area_nosemaphore; else diff --git a/arch/arc/mm/tlb.c b/arch/arc/mm/tlb.c index 71cb26df425..e1acf0ce564 100644 --- a/arch/arc/mm/tlb.c +++ b/arch/arc/mm/tlb.c @@ -100,7 +100,7 @@ /* A copy of the ASID from the PID reg is kept in asid_cache */ -unsigned int asid_cache = MM_CTXT_FIRST_CYCLE; +DEFINE_PER_CPU(unsigned int, asid_cache) = MM_CTXT_FIRST_CYCLE; /* * Utility Routine to erase a J-TLB entry @@ -274,6 +274,7 @@ noinline void local_flush_tlb_mm(struct mm_struct *mm) void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end) { + const unsigned int cpu = smp_processor_id(); unsigned long flags; /* If range @start to @end is more than 32 TLB entries deep, @@ -297,9 +298,9 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, local_irq_save(flags); - if (vma->vm_mm->context.asid != MM_CTXT_NO_ASID) { + if (asid_mm(vma->vm_mm, cpu) != MM_CTXT_NO_ASID) { while (start < end) { - tlb_entry_erase(start | hw_pid(vma->vm_mm)); + tlb_entry_erase(start | hw_pid(vma->vm_mm, cpu)); start += PAGE_SIZE; } } @@ -346,6 +347,7 @@ void local_flush_tlb_kernel_range(unsigned long start, unsigned long end) void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page) { + const unsigned int cpu = smp_processor_id(); unsigned long flags; /* Note that it is critical that interrupts are DISABLED between @@ -353,14 +355,87 @@ void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page) */ local_irq_save(flags); - if (vma->vm_mm->context.asid != MM_CTXT_NO_ASID) { - tlb_entry_erase((page & PAGE_MASK) | hw_pid(vma->vm_mm)); + if (asid_mm(vma->vm_mm, cpu) != MM_CTXT_NO_ASID) { + tlb_entry_erase((page & PAGE_MASK) | hw_pid(vma->vm_mm, cpu)); utlb_invalidate(); } local_irq_restore(flags); } +#ifdef CONFIG_SMP + +struct tlb_args { + struct vm_area_struct *ta_vma; + unsigned long ta_start; + unsigned long ta_end; +}; + +static inline void ipi_flush_tlb_page(void *arg) +{ + struct tlb_args *ta = arg; + + local_flush_tlb_page(ta->ta_vma, ta->ta_start); +} + +static inline void ipi_flush_tlb_range(void *arg) +{ + struct tlb_args *ta = arg; + + local_flush_tlb_range(ta->ta_vma, ta->ta_start, ta->ta_end); +} + +static inline void ipi_flush_tlb_kernel_range(void *arg) +{ + struct tlb_args *ta = (struct tlb_args *)arg; + + local_flush_tlb_kernel_range(ta->ta_start, ta->ta_end); +} + +void flush_tlb_all(void) +{ + on_each_cpu((smp_call_func_t)local_flush_tlb_all, NULL, 1); +} + +void flush_tlb_mm(struct mm_struct *mm) +{ + on_each_cpu_mask(mm_cpumask(mm), (smp_call_func_t)local_flush_tlb_mm, + mm, 1); +} + +void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr) +{ + struct tlb_args ta = { + .ta_vma = vma, + .ta_start = uaddr + }; + + on_each_cpu_mask(mm_cpumask(vma->vm_mm), ipi_flush_tlb_page, &ta, 1); +} + +void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, + unsigned long end) +{ + struct tlb_args ta = { + .ta_vma = vma, + .ta_start = start, + .ta_end = end + }; + + on_each_cpu_mask(mm_cpumask(vma->vm_mm), ipi_flush_tlb_range, &ta, 1); +} + +void flush_tlb_kernel_range(unsigned long start, unsigned long end) +{ + struct tlb_args ta = { + .ta_start = start, + .ta_end = end + }; + + on_each_cpu(ipi_flush_tlb_kernel_range, &ta, 1); +} +#endif + /* * Routine to create a TLB entry */ @@ -400,7 +475,7 @@ void create_tlb(struct vm_area_struct *vma, unsigned long address, pte_t *ptep) local_irq_save(flags); - tlb_paranoid_check(vma->vm_mm->context.asid, address); + tlb_paranoid_check(asid_mm(vma->vm_mm, smp_processor_id()), address); address &= PAGE_MASK; @@ -610,9 +685,9 @@ void do_tlb_overlap_fault(unsigned long cause, unsigned long address, struct pt_regs *regs) { int set, way, n; - unsigned int pd0[4], pd1[4]; /* assume max 4 ways */ unsigned long flags, is_valid; struct cpuinfo_arc_mmu *mmu = &cpuinfo_arc700[smp_processor_id()].mmu; + unsigned int pd0[mmu->ways], pd1[mmu->ways]; local_irq_save(flags); @@ -637,7 +712,7 @@ void do_tlb_overlap_fault(unsigned long cause, unsigned long address, continue; /* Scan the set for duplicate ways: needs a nested loop */ - for (way = 0; way < mmu->ways; way++) { + for (way = 0; way < mmu->ways - 1; way++) { if (!pd0[way]) continue; diff --git a/arch/arc/mm/tlbex.S b/arch/arc/mm/tlbex.S index cf7d7d9ad69..3fcfdb38d24 100644 --- a/arch/arc/mm/tlbex.S +++ b/arch/arc/mm/tlbex.S @@ -369,8 +369,8 @@ do_slow_path_pf: EXCEPTION_PROLOGUE ; ------- setup args for Linux Page fault Hanlder --------- - mov_s r0, sp - lr r1, [efa] + mov_s r1, sp + lr r0, [efa] ; We don't want exceptions to be disabled while the fault is handled. ; Now that we have saved the context we return from exception hence diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 1ad6fb6c094..04163fece49 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -317,6 +317,7 @@ config ARCH_INTEGRATOR select NEED_MACH_MEMORY_H select PLAT_VERSATILE select SPARSE_IRQ + select USE_OF select VERSATILE_FPGA_IRQ help Support for ARM's Integrator platform. @@ -358,7 +359,6 @@ config ARCH_AT91 bool "Atmel AT91" select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP - select HAVE_CLK select IRQ_DOMAIN select NEED_MACH_GPIO_H select NEED_MACH_IO_H if PCCARD @@ -372,7 +372,6 @@ config ARCH_CLPS711X bool "Cirrus Logic CLPS711x/EP721x/EP731x-based" select ARCH_REQUIRE_GPIOLIB select AUTO_ZRELADDR - select CLKDEV_LOOKUP select CLKSRC_MMIO select COMMON_CLK select CPU_ARM720T @@ -386,8 +385,9 @@ config ARCH_CLPS711X config ARCH_GEMINI bool "Cortina Systems Gemini" select ARCH_REQUIRE_GPIOLIB - select ARCH_USES_GETTIMEOFFSET + select CLKSRC_MMIO select CPU_FA526 + select GENERIC_CLOCKEVENTS select NEED_MACH_GPIO_H help Support for the Cortina Systems Gemini family SoCs @@ -631,7 +631,6 @@ config ARCH_PXA config ARCH_MSM bool "Qualcomm MSM" select ARCH_REQUIRE_GPIOLIB - select CLKDEV_LOOKUP select CLKSRC_OF if OF select COMMON_CLK select GENERIC_CLOCKEVENTS @@ -649,7 +648,6 @@ config ARCH_SHMOBILE select GENERIC_CLOCKEVENTS select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP - select HAVE_CLK select HAVE_MACH_CLKDEV select HAVE_SMP select MIGHT_HAVE_CACHE_L2X0 @@ -706,7 +704,6 @@ config ARCH_S3C24XX select CLKSRC_SAMSUNG_PWM select GENERIC_CLOCKEVENTS select GPIO_SAMSUNG - select HAVE_CLK select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG select HAVE_S3C_RTC if RTC_CLASS @@ -727,21 +724,22 @@ config ARCH_S3C64XX select ARM_VIC select CLKDEV_LOOKUP select CLKSRC_SAMSUNG_PWM + select COMMON_CLK select CPU_V6 select GENERIC_CLOCKEVENTS select GPIO_SAMSUNG - select HAVE_CLK select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG select HAVE_TCM select NEED_MACH_GPIO_H select NO_IOPORT select PLAT_SAMSUNG + select PM_GENERIC_DOMAINS select S3C_DEV_NAND select S3C_GPIO_TRACK select SAMSUNG_ATAGS - select SAMSUNG_CLKSRC select SAMSUNG_GPIOLIB_4BIT + select SAMSUNG_WAKEMASK select SAMSUNG_WDT_RESET select USB_ARCH_HAS_OHCI help @@ -754,7 +752,6 @@ config ARCH_S5P64X0 select CPU_V6 select GENERIC_CLOCKEVENTS select GPIO_SAMSUNG - select HAVE_CLK select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG select HAVE_S3C_RTC if RTC_CLASS @@ -773,7 +770,6 @@ config ARCH_S5PC100 select CPU_V7 select GENERIC_CLOCKEVENTS select GPIO_SAMSUNG - select HAVE_CLK select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG select HAVE_S3C_RTC if RTC_CLASS @@ -793,7 +789,6 @@ config ARCH_S5PV210 select CPU_V7 select GENERIC_CLOCKEVENTS select GPIO_SAMSUNG - select HAVE_CLK select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG select HAVE_S3C_RTC if RTC_CLASS @@ -810,11 +805,9 @@ config ARCH_EXYNOS select ARCH_REQUIRE_GPIOLIB select ARCH_SPARSEMEM_ENABLE select ARM_GIC - select CLKDEV_LOOKUP select COMMON_CLK select CPU_V7 select GENERIC_CLOCKEVENTS - select HAVE_CLK select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG select HAVE_S3C_RTC if RTC_CLASS @@ -824,20 +817,6 @@ config ARCH_EXYNOS help Support for SAMSUNG's EXYNOS SoCs (EXYNOS4/5) -config ARCH_SHARK - bool "Shark" - select ARCH_USES_GETTIMEOFFSET - select CPU_SA110 - select ISA - select ISA_DMA - select NEED_MACH_MEMORY_H - select PCI - select VIRT_TO_BUS - select ZONE_DMA - help - Support for the StrongARM based Digital DNARD machine, also known - as "Shark" (<http://www.shark-linux.de/shark.html>). - config ARCH_DAVINCI bool "TI DaVinci" select ARCH_HAS_HOLES_MEMORYMODEL @@ -847,7 +826,6 @@ config ARCH_DAVINCI select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP select HAVE_IDE - select NEED_MACH_GPIO_H select TI_PRIV_EDMA select USE_OF select ZONE_DMA @@ -865,7 +843,6 @@ config ARCH_OMAP1 select CLKSRC_MMIO select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP - select HAVE_CLK select HAVE_IDE select IRQ_DOMAIN select NEED_MACH_IO_H if PCCARD @@ -1009,9 +986,7 @@ source "arch/arm/mach-sti/Kconfig" source "arch/arm/mach-s3c24xx/Kconfig" -if ARCH_S3C64XX source "arch/arm/mach-s3c64xx/Kconfig" -endif source "arch/arm/mach-s5p64x0/Kconfig" @@ -1431,12 +1406,6 @@ config PCI_NANOENGINE config PCI_SYSCALL def_bool PCI -# Select the host bridge type -config PCI_HOST_VIA82C505 - bool - depends on PCI && ARCH_SHARK - default y - config PCI_HOST_ITE8152 bool depends on PCI && MACH_ARMCORE diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 9762c84b419..d597c6b8488 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -386,6 +386,13 @@ choice when u-boot hands over to the kernel, the system silently crashes, with no serial output at all. + config DEBUG_VF_UART + bool "Vybrid UART" + depends on SOC_VF610 + help + Say Y here if you want kernel low-level debugging support + on Vybrid based platforms. + config DEBUG_NOMADIK_UART bool "Kernel low-level debugging messages via NOMADIK UART" depends on ARCH_NOMADIK @@ -906,6 +913,7 @@ config DEBUG_LL_INCLUDE default "debug/tegra.S" if DEBUG_TEGRA_UART default "debug/ux500.S" if DEBUG_UX500_UART default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT + default "debug/vf.S" if DEBUG_VF_UART default "debug/vt8500.S" if DEBUG_VT8500_UART0 default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1 default "mach/debug-macro.S" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index db50b626be9..8b667132d7b 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -188,7 +188,6 @@ machine-$(CONFIG_ARCH_S5P64X0) += s5p64x0 machine-$(CONFIG_ARCH_S5PC100) += s5pc100 machine-$(CONFIG_ARCH_S5PV210) += s5pv210 machine-$(CONFIG_ARCH_SA1100) += sa1100 -machine-$(CONFIG_ARCH_SHARK) += shark machine-$(CONFIG_ARCH_SHMOBILE) += shmobile machine-$(CONFIG_ARCH_SHMOBILE_MULTI) += shmobile machine-$(CONFIG_ARCH_SIRF) += prima2 diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 7ac1610252b..e7190bb5998 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -44,10 +44,6 @@ ifeq ($(CONFIG_ARCH_ACORN),y) OBJS += ll_char_wr.o font.o endif -ifeq ($(CONFIG_ARCH_SHARK),y) -OBJS += head-shark.o ofw-shark.o -endif - ifeq ($(CONFIG_ARCH_SA1100),y) OBJS += head-sa1100.o endif diff --git a/arch/arm/boot/compressed/head-shark.S b/arch/arm/boot/compressed/head-shark.S deleted file mode 100644 index 92b56897ed6..00000000000 --- a/arch/arm/boot/compressed/head-shark.S +++ /dev/null @@ -1,140 +0,0 @@ -/* The head-file for the Shark - * by Alexander Schulz - * - * Does the following: - * - get the memory layout from firmware. This can only be done as long as the mmu - * is still on. - * - switch the mmu off, so we have physical addresses - * - copy the kernel to 0x08508000. This is done to have a fixed address where the - * C-parts (misc.c) are executed. This address must be known at compile-time, - * but the load-address of the kernel depends on how much memory is installed. - * - Jump to this location. - * - Set r8 with 0, r7 with the architecture ID for head.S - */ - -#include <linux/linkage.h> - -#include <asm/assembler.h> - - .section ".start", "ax" - - .arch armv4 - b __beginning - -__ofw_data: .long 0 @ the number of memory blocks - .space 128 @ (startaddr,size) ... - .space 128 @ bootargs - .align - -__beginning: mov r4, r0 @ save the entry to the firmware - - mov r0, #0xC0 @ disable irq and fiq - mov r1, r0 - mrs r3, cpsr - bic r2, r3, r0 - eor r2, r2, r1 - msr cpsr_c, r2 - - mov r0, r4 @ get the Memory layout from firmware - adr r1, __ofw_data - add r2, r1, #4 - mov lr, pc - b ofw_init - mov r1, #0 - - adr r2, __mmu_off @ calculate physical address - sub r2, r2, #0xf0000000 @ openprom maps us at f000 virt, 0e50 phys - adr r0, __ofw_data - ldr r0, [r0, #4] - add r2, r2, r0 - add r2, r2, #0x00500000 - - mrc p15, 0, r3, c1, c0 - bic r3, r3, #0xC @ Write Buffer and DCache - bic r3, r3, #0x1000 @ ICache - mcr p15, 0, r3, c1, c0 @ disabled - - mov r0, #0 - mcr p15, 0, r0, c7, c7 @ flush I,D caches on v4 - mcr p15, 0, r0, c7, c10, 4 @ drain write buffer on v4 - mcr p15, 0, r0, c8, c7 @ flush I,D TLBs on v4 - - bic r3, r3, #0x1 @ MMU - mcr p15, 0, r3, c1, c0 @ disabled - - mov pc, r2 - -__copy_target: .long 0x08507FFC -__copy_end: .long 0x08607FFC - - .word _start - .word __bss_start - - .align -__temp_stack: .space 128 - -__mmu_off: - adr r0, __ofw_data @ read the 1. entry of the memory map - ldr r0, [r0, #4] - orr r0, r0, #0x00600000 - sub r0, r0, #4 - - ldr r1, __copy_end - ldr r3, __copy_target - -/* r0 = 0x0e600000 (current end of kernelcode) - * r3 = 0x08508000 (where it should begin) - * r1 = 0x08608000 (end of copying area, 1MB) - * The kernel is compressed, so 1 MB should be enough. - * copy the kernel to the beginning of physical memory - * We start from the highest address, so we can copy - * from 0x08500000 to 0x08508000 if we have only 8MB - */ - -/* As we get more 2.6-kernels it gets more and more - * uncomfortable to be bound to kernel images of 1MB only. - * So we add a loop here, to be able to copy some more. - * Alexander Schulz 2005-07-17 - */ - - mov r4, #3 @ How many megabytes to copy - - -__MoveCode: sub r4, r4, #1 - -__Copy: ldr r2, [r0], #-4 - str r2, [r1], #-4 - teq r1, r3 - bne __Copy - - /* The firmware maps us in blocks of 1 MB, the next block is - _below_ the last one. So our decrementing source pointer - ist right here, but the destination pointer must be increased - by 2 MB */ - add r1, r1, #0x00200000 - add r3, r3, #0x00100000 - - teq r4, #0 - bne __MoveCode - - - /* and jump to it */ - adr r2, __go_on @ where we want to jump - adr r0, __ofw_data @ read the 1. entry of the memory map - ldr r0, [r0, #4] - sub r2, r2, r0 @ we are mapped add 0e50 now, sub that (-0e00) - sub r2, r2, #0x00500000 @ -0050 - ldr r0, __copy_target @ and add 0850 8000 instead - add r0, r0, #4 - add r2, r2, r0 - mov pc, r2 @ and jump there - -__go_on: - adr sp, __temp_stack - add sp, sp, #128 - adr r0, __ofw_data - mov lr, pc - b create_params - - mov r8, #0 - mov r7, #15 diff --git a/arch/arm/boot/compressed/ofw-shark.c b/arch/arm/boot/compressed/ofw-shark.c deleted file mode 100644 index 465c54b6b12..00000000000 --- a/arch/arm/boot/compressed/ofw-shark.c +++ /dev/null @@ -1,260 +0,0 @@ -/* - * linux/arch/arm/boot/compressed/ofw-shark.c - * - * by Alexander Schulz - * - * This file is used to get some basic information - * about the memory layout of the shark we are running - * on. Memory is usually divided in blocks a 8 MB. - * And bootargs are copied from OpenFirmware. - */ - - -#include <linux/kernel.h> -#include <linux/types.h> -#include <asm/setup.h> -#include <asm/page.h> - - -asmlinkage void -create_params (unsigned long *buffer) -{ - /* Is there a better address? Also change in mach-shark/core.c */ - struct tag *tag = (struct tag *) 0x08003000; - int j,i,m,k,nr_banks,size; - unsigned char *c; - - k = 0; - - /* Head of the taglist */ - tag->hdr.tag = ATAG_CORE; - tag->hdr.size = tag_size(tag_core); - tag->u.core.flags = 1; - tag->u.core.pagesize = PAGE_SIZE; - tag->u.core.rootdev = 0; - - /* Build up one tagged block for each memory region */ - size=0; - nr_banks=(unsigned int) buffer[0]; - for (j=0;j<nr_banks;j++){ - /* search the lowest address and put it into the next entry */ - /* not a fast sort algorithm, but there are at most 8 entries */ - /* and this is used only once anyway */ - m=0xffffffff; - for (i=0;i<(unsigned int) buffer[0];i++){ - if (buffer[2*i+1]<m) { - m=buffer[2*i+1]; - k=i; - } - } - - tag = tag_next(tag); - tag->hdr.tag = ATAG_MEM; - tag->hdr.size = tag_size(tag_mem32); - tag->u.mem.size = buffer[2*k+2]; - tag->u.mem.start = buffer[2*k+1]; - - size += buffer[2*k+2]; - - buffer[2*k+1]=0xffffffff; /* mark as copied */ - } - - /* The command line */ - tag = tag_next(tag); - tag->hdr.tag = ATAG_CMDLINE; - - c=(unsigned char *)(&buffer[34]); - j=0; - while (*c) tag->u.cmdline.cmdline[j++]=*c++; - - tag->u.cmdline.cmdline[j]=0; - tag->hdr.size = (j + 7 + sizeof(struct tag_header)) >> 2; - - /* Hardware revision */ - tag = tag_next(tag); - tag->hdr.tag = ATAG_REVISION; - tag->hdr.size = tag_size(tag_revision); - tag->u.revision.rev = ((unsigned char) buffer[33])-'0'; - - /* End of the taglist */ - tag = tag_next(tag); - tag->hdr.tag = 0; - tag->hdr.size = 0; -} - - -typedef int (*ofw_handle_t)(void *); - -/* Everything below is called with a wrong MMU setting. - * This means: no string constants, no initialization of - * arrays, no global variables! This is ugly but I didn't - * want to write this in assembler :-) - */ - -int -of_decode_int(const unsigned char *p) -{ - unsigned int i = *p++ << 8; - i = (i + *p++) << 8; - i = (i + *p++) << 8; - return (i + *p); -} - -int -OF_finddevice(ofw_handle_t openfirmware, char *name) -{ - unsigned int args[8]; - char service[12]; - - service[0]='f'; - service[1]='i'; - service[2]='n'; - service[3]='d'; - service[4]='d'; - service[5]='e'; - service[6]='v'; - service[7]='i'; - service[8]='c'; - service[9]='e'; - service[10]='\0'; - - args[0]=(unsigned int)service; - args[1]=1; - args[2]=1; - args[3]=(unsigned int)name; - - if (openfirmware(args) == -1) - return -1; - return args[4]; -} - -int -OF_getproplen(ofw_handle_t openfirmware, int handle, char *prop) -{ - unsigned int args[8]; - char service[12]; - - service[0]='g'; - service[1]='e'; - service[2]='t'; - service[3]='p'; - service[4]='r'; - service[5]='o'; - service[6]='p'; - service[7]='l'; - service[8]='e'; - service[9]='n'; - service[10]='\0'; - - args[0] = (unsigned int)service; - args[1] = 2; - args[2] = 1; - args[3] = (unsigned int)handle; - args[4] = (unsigned int)prop; - - if (openfirmware(args) == -1) - return -1; - return args[5]; -} - -int -OF_getprop(ofw_handle_t openfirmware, int handle, char *prop, void *buf, unsigned int buflen) -{ - unsigned int args[8]; - char service[8]; - - service[0]='g'; - service[1]='e'; - service[2]='t'; - service[3]='p'; - service[4]='r'; - service[5]='o'; - service[6]='p'; - service[7]='\0'; - - args[0] = (unsigned int)service; - args[1] = 4; - args[2] = 1; - args[3] = (unsigned int)handle; - args[4] = (unsigned int)prop; - args[5] = (unsigned int)buf; - args[6] = buflen; - - if (openfirmware(args) == -1) - return -1; - return args[7]; -} - -asmlinkage void ofw_init(ofw_handle_t o, int *nomr, int *pointer) -{ - int phandle,i,mem_len,buffer[32]; - char temp[15]; - - temp[0]='/'; - temp[1]='m'; - temp[2]='e'; - temp[3]='m'; - temp[4]='o'; - temp[5]='r'; - temp[6]='y'; - temp[7]='\0'; - - phandle=OF_finddevice(o,temp); - - temp[0]='r'; - temp[1]='e'; - temp[2]='g'; - temp[3]='\0'; - - mem_len = OF_getproplen(o,phandle, temp); - OF_getprop(o,phandle, temp, buffer, mem_len); - *nomr=mem_len >> 3; - - for (i=0; i<=mem_len/4; i++) pointer[i]=of_decode_int((const unsigned char *)&buffer[i]); - - temp[0]='/'; - temp[1]='c'; - temp[2]='h'; - temp[3]='o'; - temp[4]='s'; - temp[5]='e'; - temp[6]='n'; - temp[7]='\0'; - - phandle=OF_finddevice(o,temp); - - temp[0]='b'; - temp[1]='o'; - temp[2]='o'; - temp[3]='t'; - temp[4]='a'; - temp[5]='r'; - temp[6]='g'; - temp[7]='s'; - temp[8]='\0'; - - mem_len = OF_getproplen(o,phandle, temp); - OF_getprop(o,phandle, temp, buffer, mem_len); - if (mem_len > 128) mem_len=128; - for (i=0; i<=mem_len/4; i++) pointer[i+33]=buffer[i]; - pointer[i+33]=0; - - temp[0]='/'; - temp[1]='\0'; - phandle=OF_finddevice(o,temp); - temp[0]='b'; - temp[1]='a'; - temp[2]='n'; - temp[3]='n'; - temp[4]='e'; - temp[5]='r'; - temp[6]='-'; - temp[7]='n'; - temp[8]='a'; - temp[9]='m'; - temp[10]='e'; - temp[11]='\0'; - mem_len = OF_getproplen(o,phandle, temp); - OF_getprop(o,phandle, temp, buffer, mem_len); - * ((unsigned char *) &pointer[32]) = ((unsigned char *) buffer)[mem_len-2]; -} diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 802720e3e8f..d57c1a65b24 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -40,17 +40,17 @@ dtb-$(CONFIG_ARCH_AT91) += sama5d31ek.dtb dtb-$(CONFIG_ARCH_AT91) += sama5d33ek.dtb dtb-$(CONFIG_ARCH_AT91) += sama5d34ek.dtb dtb-$(CONFIG_ARCH_AT91) += sama5d35ek.dtb - dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb.dtb - dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb -dtb-$(CONFIG_ARCH_BCM) += bcm11351-brt.dtb \ +dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm11351-brt.dtb \ bcm28155-ap.dtb +dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb dtb-$(CONFIG_ARCH_DAVINCI) += da850-enbw-cmc.dtb \ da850-evm.dtb dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \ dove-cubox.dtb \ dove-d2plug.dtb \ + dove-d3plug.dtb \ dove-dove-db.dtb dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ exynos4210-smdkv310.dtb \ @@ -96,22 +96,25 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \ kirkwood-ns2mini.dtb \ kirkwood-nsa310.dtb \ kirkwood-nsa310a.dtb \ + kirkwood-openblocks_a6.dtb \ + kirkwood-openblocks_a7.dtb \ kirkwood-sheevaplug.dtb \ kirkwood-sheevaplug-esata.dtb \ kirkwood-topkick.dtb \ kirkwood-ts219-6281.dtb \ - kirkwood-ts219-6282.dtb \ - kirkwood-openblocks_a6.dtb + kirkwood-ts219-6282.dtb dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb -dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \ - msm8960-cdp.dtb +dtb-$(CONFIG_ARCH_MSM) += qcom-msm8660-surf.dtb \ + qcom-msm8960-cdp.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \ armada-370-mirabox.dtb \ armada-370-netgear-rn102.dtb \ + armada-370-netgear-rn104.dtb \ armada-370-rd.dtb \ armada-xp-axpwifiap.dtb \ armada-xp-db.dtb \ armada-xp-gp.dtb \ + armada-xp-matrix.dtb \ armada-xp-openblocks-ax3-4.dtb dtb-$(CONFIG_ARCH_MXC) += \ imx25-karo-tx25.dtb \ @@ -142,8 +145,10 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx6q-sabrelite.dtb \ imx6q-sabresd.dtb \ imx6q-sbc6x.dtb \ + imx6q-udoo.dtb \ imx6q-wandboard.dtb \ imx6sl-evk.dtb \ + vf610-cosmic.dtb \ vf610-twr.dtb dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \ imx23-olinuxino.dtb \ @@ -159,6 +164,7 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \ imx28-cfa10057.dtb \ imx28-cfa10058.dtb \ imx28-evk.dtb \ + imx28-m28cu3.dtb \ imx28-m28evk.dtb \ imx28-sps1.dtb \ imx28-tx28.dtb @@ -172,9 +178,15 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ omap3-devkit8000.dtb \ omap3-beagle-xm.dtb \ omap3-evm.dtb \ + omap3-evm-37xx.dtb \ + omap3-n900.dtb \ + omap3-n9.dtb \ + omap3-n950.dtb \ omap3-tobi.dtb \ + omap3-gta04.dtb \ omap3-igep0020.dtb \ omap3-igep0030.dtb \ + omap3-zoom3.dtb \ omap4-panda.dtb \ omap4-panda-a4.dtb \ omap4-panda-es.dtb \ @@ -186,25 +198,33 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ am335x-evmsk.dtb \ am335x-bone.dtb \ am335x-boneblack.dtb \ + am335x-nano.dtb \ + am335x-base0033.dtb \ am3517-evm.dtb \ am3517_mt_ventoux.dtb \ - am43x-epos-evm.dtb + am43x-epos-evm.dtb \ + dra7-evm.dtb dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \ - ste-hrefprev60.dtb \ - ste-hrefv60plus.dtb \ + ste-hrefprev60-stuib.dtb \ + ste-hrefprev60-tvk.dtb \ + ste-hrefv60plus-stuib.dtb \ + ste-hrefv60plus-tvk.dtb \ ste-ccu8540.dtb \ ste-ccu9540.dtb dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb +dtb-$(CONFIG_ARCH_S3C64XX) += s3c6410-mini6410.dtb \ + s3c6410-smdk6410.dtb dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \ - emev2-kzm9d-reference.dtb \ + r7s72100-genmai.dtb \ r8a7740-armadillo800eva.dtb \ r8a7778-bockw.dtb \ r8a7778-bockw-reference.dtb \ r8a7740-armadillo800eva-reference.dtb \ r8a7779-marzen.dtb \ r8a7779-marzen-reference.dtb \ + r8a7791-koelsch.dtb \ r8a7790-lager.dtb \ r8a7790-lager-reference.dtb \ sh73a0-kzm9g.dtb \ @@ -212,8 +232,10 @@ dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \ r8a73a4-ape6evm.dtb \ r8a73a4-ape6evm-reference.dtb \ sh7372-mackerel.dtb -dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += emev2-kzm9d-reference.dtb -dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_cyclone5.dtb \ +dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += emev2-kzm9d.dtb +dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_arria5_socdk.dtb \ + socfpga_cyclone5_socdk.dtb \ + socfpga_cyclone5_sockit.dtb \ socfpga_vt.dtb dtb-$(CONFIG_ARCH_SPEAR13XX) += spear1310-evb.dtb \ spear1340-evb.dtb @@ -235,6 +257,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += \ sun5i-a13-olinuxino.dtb \ sun6i-a31-colombus.dtb \ sun7i-a20-cubieboard2.dtb \ + sun7i-a20-cubietruck.dtb \ sun7i-a20-olinuxino-micro.dtb dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ tegra20-iris-512.dtb \ @@ -249,7 +272,8 @@ dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ tegra30-beaver.dtb \ tegra30-cardhu-a02.dtb \ tegra30-cardhu-a04.dtb \ - tegra114-dalmore.dtb + tegra114-dalmore.dtb \ + tegra124-venice2.dtb dtb-$(CONFIG_ARCH_VERSATILE) += versatile-ab.dtb \ versatile-pb.dtb dtb-$(CONFIG_ARCH_U300) += ste-u300.dtb diff --git a/arch/arm/boot/dts/am335x-base0033.dts b/arch/arm/boot/dts/am335x-base0033.dts new file mode 100644 index 00000000000..b4f95c2bbf7 --- /dev/null +++ b/arch/arm/boot/dts/am335x-base0033.dts @@ -0,0 +1,16 @@ +/* + * am335x-base0033.dts - Device Tree file for IGEP AQUILA EXPANSION + * + * Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "am335x-igep0033.dtsi" + +/ { + model = "IGEP COM AM335x on AQUILA Expansion"; + compatible = "isee,am335x-base0033", "isee,am335x-igep0033", "ti,am33xx"; +}; diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index 2f66deda9f5..e3f27ec3171 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -21,177 +21,205 @@ reg = <0x80000000 0x10000000>; /* 256 MB */ }; - am33xx_pinmux: pinmux@44e10800 { + leds { pinctrl-names = "default"; - pinctrl-0 = <&clkout2_pin>; - - user_leds_s0: user_leds_s0 { - pinctrl-single,pins = < - 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */ - 0x58 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a6.gpio1_22 */ - 0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */ - 0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio1_24 */ - >; - }; + pinctrl-0 = <&user_leds_s0>; - i2c0_pins: pinmux_i2c0_pins { - pinctrl-single,pins = < - 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ - 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ - >; - }; + compatible = "gpio-leds"; - uart0_pins: pinmux_uart0_pins { - pinctrl-single,pins = < - 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ - 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ - >; + led@2 { + label = "beaglebone:green:heartbeat"; + gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; }; - clkout2_pin: pinmux_clkout2_pin { - pinctrl-single,pins = < - 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ - >; + led@3 { + label = "beaglebone:green:mmc0"; + gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + default-state = "off"; }; - cpsw_default: cpsw_default { - pinctrl-single,pins = < - /* Slave 1 */ - 0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxerr.mii1_rxerr */ - 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txen.mii1_txen */ - 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */ - 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd3.mii1_txd3 */ - 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd2.mii1_txd2 */ - 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd1.mii1_txd1 */ - 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd0.mii1_txd0 */ - 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_txclk.mii1_txclk */ - 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxclk.mii1_rxclk */ - 0x134 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd3.mii1_rxd3 */ - 0x138 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd2.mii1_rxd2 */ - 0x13c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd1.mii1_rxd1 */ - 0x140 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd0.mii1_rxd0 */ - >; + led@4 { + label = "beaglebone:green:usr2"; + gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "cpu0"; + default-state = "off"; }; - cpsw_sleep: cpsw_sleep { - pinctrl-single,pins = < - /* Slave 1 reset value */ - 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) - >; + led@5 { + label = "beaglebone:green:usr3"; + gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc1"; + default-state = "off"; }; + }; - davinci_mdio_default: davinci_mdio_default { - pinctrl-single,pins = < - /* MDIO */ - 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ - 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ - >; - }; + vmmcsd_fixed: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vmmcsd_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; - davinci_mdio_sleep: davinci_mdio_sleep { - pinctrl-single,pins = < - /* MDIO reset value */ - 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) - >; - }; +&am33xx_pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&clkout2_pin>; + + user_leds_s0: user_leds_s0 { + pinctrl-single,pins = < + 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */ + 0x58 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a6.gpio1_22 */ + 0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */ + 0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio1_24 */ + >; }; - ocp { - uart0: serial@44e09000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins>; + i2c0_pins: pinmux_i2c0_pins { + pinctrl-single,pins = < + 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + >; + }; - status = "okay"; - }; + uart0_pins: pinmux_uart0_pins { + pinctrl-single,pins = < + 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; - musb: usb@47400000 { - status = "okay"; + clkout2_pin: pinmux_clkout2_pin { + pinctrl-single,pins = < + 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ + >; + }; - control@44e10000 { - status = "okay"; - }; + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + 0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxerr.mii1_rxerr */ + 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txen.mii1_txen */ + 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */ + 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd3.mii1_txd3 */ + 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd2.mii1_txd2 */ + 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd1.mii1_txd1 */ + 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd0.mii1_txd0 */ + 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_txclk.mii1_txclk */ + 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxclk.mii1_rxclk */ + 0x134 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd3.mii1_rxd3 */ + 0x138 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd2.mii1_rxd2 */ + 0x13c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd1.mii1_rxd1 */ + 0x140 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd0.mii1_rxd0 */ + >; + }; - usb-phy@47401300 { - status = "okay"; - }; + cpsw_sleep: cpsw_sleep { + pinctrl-single,pins = < + /* Slave 1 reset value */ + 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; - usb-phy@47401b00 { - status = "okay"; - }; + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* MDIO */ + 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; - usb@47401000 { - status = "okay"; - }; + davinci_mdio_sleep: davinci_mdio_sleep { + pinctrl-single,pins = < + /* MDIO reset value */ + 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; - usb@47401800 { - status = "okay"; - dr_mode = "host"; - }; + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + 0x160 (PIN_INPUT | MUX_MODE7) /* GPIO0_6 */ + >; + }; - dma-controller@07402000 { - status = "okay"; - }; - }; + emmc_pins: pinmux_emmc_pins { + pinctrl-single,pins = < + 0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ + 0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ + 0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ + 0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ + 0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ + 0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ + 0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */ + 0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */ + 0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */ + 0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */ + >; + }; +}; - i2c0: i2c@44e0b000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins>; +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; - status = "okay"; - clock-frequency = <400000>; + status = "okay"; +}; - tps: tps@24 { - reg = <0x24>; - }; +&usb { + status = "okay"; - }; + control@44e10000 { + status = "okay"; }; - leds { - pinctrl-names = "default"; - pinctrl-0 = <&user_leds_s0>; + usb-phy@47401300 { + status = "okay"; + }; - compatible = "gpio-leds"; + usb-phy@47401b00 { + status = "okay"; + }; - led@2 { - label = "beaglebone:green:heartbeat"; - gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - default-state = "off"; - }; + usb@47401000 { + status = "okay"; + }; - led@3 { - label = "beaglebone:green:mmc0"; - gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "mmc0"; - default-state = "off"; - }; + usb@47401800 { + status = "okay"; + dr_mode = "host"; + }; - led@4 { - label = "beaglebone:green:usr2"; - gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; + dma-controller@07402000 { + status = "okay"; + }; +}; - led@5 { - label = "beaglebone:green:usr3"; - gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + + status = "okay"; + clock-frequency = <400000>; + + tps: tps@24 { + reg = <0x24>; }; + }; /include/ "tps65217.dtsi" @@ -260,3 +288,12 @@ pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; }; + +&mmc1 { + status = "okay"; + bus-width = <0x4>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; + cd-inverted; +}; diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts index 7993c489982..94ee427a6db 100644 --- a/arch/arm/boot/dts/am335x-bone.dts +++ b/arch/arm/boot/dts/am335x-bone.dts @@ -9,3 +9,21 @@ #include "am33xx.dtsi" #include "am335x-bone-common.dtsi" + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&ldo3_reg>; +}; + +&sham { + status = "okay"; +}; + +&aes { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts index 197cadf72d2..6b71ad95a5c 100644 --- a/arch/arm/boot/dts/am335x-boneblack.dts +++ b/arch/arm/boot/dts/am335x-boneblack.dts @@ -15,3 +15,64 @@ regulator-max-microvolt = <1800000>; regulator-always-on; }; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + bus-width = <8>; + status = "okay"; + ti,vcc-aux-disable-is-sleep; +}; + +&am33xx_pinmux { + nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins { + pinctrl-single,pins = < + 0x1b0 0x03 /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */ + 0xa0 0x08 /* lcd_data0.lcd_data0, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xa4 0x08 /* lcd_data1.lcd_data1, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xa8 0x08 /* lcd_data2.lcd_data2, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xac 0x08 /* lcd_data3.lcd_data3, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xb0 0x08 /* lcd_data4.lcd_data4, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xb4 0x08 /* lcd_data5.lcd_data5, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xb8 0x08 /* lcd_data6.lcd_data6, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xbc 0x08 /* lcd_data7.lcd_data7, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xc0 0x08 /* lcd_data8.lcd_data8, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xc4 0x08 /* lcd_data9.lcd_data9, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xc8 0x08 /* lcd_data10.lcd_data10, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xcc 0x08 /* lcd_data11.lcd_data11, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xd0 0x08 /* lcd_data12.lcd_data12, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xd4 0x08 /* lcd_data13.lcd_data13, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xd8 0x08 /* lcd_data14.lcd_data14, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xdc 0x08 /* lcd_data15.lcd_data15, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xe0 0x00 /* lcd_vsync.lcd_vsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + 0xe4 0x00 /* lcd_hsync.lcd_hsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + 0xe8 0x00 /* lcd_pclk.lcd_pclk, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + 0xec 0x00 /* lcd_ac_bias_en.lcd_ac_bias_en, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + >; + }; + nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins { + pinctrl-single,pins = < + 0x1b0 0x03 /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */ + >; + }; +}; + +&lcdc { + status = "okay"; +}; + +/ { + hdmi { + compatible = "ti,tilcdc,slave"; + i2c = <&i2c0>; + pinctrl-names = "default", "off"; + pinctrl-0 = <&nxp_hdmi_bonelt_pins>; + pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>; + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index e8ec8756e49..98742943617 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -24,324 +24,6 @@ reg = <0x80000000 0x10000000>; /* 256 MB */ }; - am33xx_pinmux: pinmux@44e10800 { - pinctrl-names = "default"; - pinctrl-0 = <&matrix_keypad_s0 &volume_keys_s0 &clkout2_pin>; - - matrix_keypad_s0: matrix_keypad_s0 { - pinctrl-single,pins = < - 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */ - 0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a6.gpio1_22 */ - 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a9.gpio1_25 */ - 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a10.gpio1_26 */ - 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.gpio1_27 */ - >; - }; - - volume_keys_s0: volume_keys_s0 { - pinctrl-single,pins = < - 0x150 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_sclk.gpio0_2 */ - 0x154 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_d0.gpio0_3 */ - >; - }; - - i2c0_pins: pinmux_i2c0_pins { - pinctrl-single,pins = < - 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ - 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ - >; - }; - - i2c1_pins: pinmux_i2c1_pins { - pinctrl-single,pins = < - 0x158 (PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_d1.i2c1_sda */ - 0x15c (PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_cs0.i2c1_scl */ - >; - }; - - uart0_pins: pinmux_uart0_pins { - pinctrl-single,pins = < - 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ - 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ - >; - }; - - clkout2_pin: pinmux_clkout2_pin { - pinctrl-single,pins = < - 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ - >; - }; - - nandflash_pins_s0: nandflash_pins_s0 { - pinctrl-single,pins = < - 0x0 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ - 0x4 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ - 0x8 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ - 0xc (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ - 0x10 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ - 0x14 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ - 0x18 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ - 0x1c (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ - 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ - 0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_30 */ - 0x7c (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ - 0x90 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ - 0x94 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ - 0x98 (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */ - 0x9c (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ - >; - }; - - ecap0_pins: backlight_pins { - pinctrl-single,pins = < - 0x164 0x0 /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */ - >; - }; - - cpsw_default: cpsw_default { - pinctrl-single,pins = < - /* Slave 1 */ - 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */ - 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ - 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_td3 */ - 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_td2 */ - 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */ - 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */ - 0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */ - 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */ - 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd3.rgmii1_rd3 */ - 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd2.rgmii1_rd2 */ - 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */ - 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */ - >; - }; - - cpsw_sleep: cpsw_sleep { - pinctrl-single,pins = < - /* Slave 1 reset value */ - 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) - >; - }; - - davinci_mdio_default: davinci_mdio_default { - pinctrl-single,pins = < - /* MDIO */ - 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ - 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ - >; - }; - - davinci_mdio_sleep: davinci_mdio_sleep { - pinctrl-single,pins = < - /* MDIO reset value */ - 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) - >; - }; - }; - - ocp { - uart0: serial@44e09000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins>; - - status = "okay"; - }; - - i2c0: i2c@44e0b000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins>; - - status = "okay"; - clock-frequency = <400000>; - - tps: tps@2d { - reg = <0x2d>; - }; - }; - - musb: usb@47400000 { - status = "okay"; - - control@44e10000 { - status = "okay"; - }; - - usb-phy@47401300 { - status = "okay"; - }; - - usb-phy@47401b00 { - status = "okay"; - }; - - usb@47401000 { - status = "okay"; - }; - - usb@47401800 { - status = "okay"; - dr_mode = "host"; - }; - - dma-controller@07402000 { - status = "okay"; - }; - }; - - i2c1: i2c@4802a000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins>; - - status = "okay"; - clock-frequency = <100000>; - - lis331dlh: lis331dlh@18 { - compatible = "st,lis331dlh", "st,lis3lv02d"; - reg = <0x18>; - Vdd-supply = <&lis3_reg>; - Vdd_IO-supply = <&lis3_reg>; - - st,click-single-x; - st,click-single-y; - st,click-single-z; - st,click-thresh-x = <10>; - st,click-thresh-y = <10>; - st,click-thresh-z = <10>; - st,irq1-click; - st,irq2-click; - st,wakeup-x-lo; - st,wakeup-x-hi; - st,wakeup-y-lo; - st,wakeup-y-hi; - st,wakeup-z-lo; - st,wakeup-z-hi; - st,min-limit-x = <120>; - st,min-limit-y = <120>; - st,min-limit-z = <140>; - st,max-limit-x = <550>; - st,max-limit-y = <550>; - st,max-limit-z = <750>; - }; - - tsl2550: tsl2550@39 { - compatible = "taos,tsl2550"; - reg = <0x39>; - }; - - tmp275: tmp275@48 { - compatible = "ti,tmp275"; - reg = <0x48>; - }; - }; - - elm: elm@48080000 { - status = "okay"; - }; - - epwmss0: epwmss@48300000 { - status = "okay"; - - ecap0: ecap@48300100 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&ecap0_pins>; - }; - }; - - gpmc: gpmc@50000000 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&nandflash_pins_s0>; - ranges = <0 0 0x08000000 0x10000000>; /* CS0: NAND */ - nand@0,0 { - reg = <0 0 0>; /* CS0, offset 0 */ - nand-bus-width = <8>; - ti,nand-ecc-opt = "bch8"; - gpmc,device-nand = "true"; - gpmc,device-width = <1>; - gpmc,sync-clk-ps = <0>; - gpmc,cs-on-ns = <0>; - gpmc,cs-rd-off-ns = <44>; - gpmc,cs-wr-off-ns = <44>; - gpmc,adv-on-ns = <6>; - gpmc,adv-rd-off-ns = <34>; - gpmc,adv-wr-off-ns = <44>; - gpmc,we-on-ns = <0>; - gpmc,we-off-ns = <40>; - gpmc,oe-on-ns = <0>; - gpmc,oe-off-ns = <54>; - gpmc,access-ns = <64>; - gpmc,rd-cycle-ns = <82>; - gpmc,wr-cycle-ns = <82>; - gpmc,wait-on-read = "true"; - gpmc,wait-on-write = "true"; - gpmc,bus-turnaround-ns = <0>; - gpmc,cycle2cycle-delay-ns = <0>; - gpmc,clk-activation-ns = <0>; - gpmc,wait-monitoring-ns = <0>; - gpmc,wr-access-ns = <40>; - gpmc,wr-data-mux-bus-ns = <0>; - - #address-cells = <1>; - #size-cells = <1>; - elm_id = <&elm>; - - /* MTD partition table */ - partition@0 { - label = "SPL1"; - reg = <0x00000000 0x000020000>; - }; - - partition@1 { - label = "SPL2"; - reg = <0x00020000 0x00020000>; - }; - - partition@2 { - label = "SPL3"; - reg = <0x00040000 0x00020000>; - }; - - partition@3 { - label = "SPL4"; - reg = <0x00060000 0x00020000>; - }; - - partition@4 { - label = "U-boot"; - reg = <0x00080000 0x001e0000>; - }; - - partition@5 { - label = "environment"; - reg = <0x00260000 0x00020000>; - }; - - partition@6 { - label = "Kernel"; - reg = <0x00280000 0x00500000>; - }; - - partition@7 { - label = "File-System"; - reg = <0x00780000 0x0F880000>; - }; - }; - }; - }; - vbat: fixedregulator@0 { compatible = "regulator-fixed"; regulator-name = "vbat"; @@ -403,10 +85,447 @@ brightness-levels = <0 51 53 56 62 75 101 152 255>; default-brightness-level = <8>; }; + + panel { + compatible = "ti,tilcdc,panel"; + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_pins_s0>; + panel-info { + ac-bias = <255>; + ac-bias-intrpt = <0>; + dma-burst-sz = <16>; + bpp = <32>; + fdd = <0x80>; + sync-edge = <0>; + sync-ctrl = <1>; + raster-order = <0>; + fifo-th = <0>; + }; + + display-timings { + 800x480p62 { + clock-frequency = <30000000>; + hactive = <800>; + vactive = <480>; + hfront-porch = <39>; + hback-porch = <39>; + hsync-len = <47>; + vback-porch = <29>; + vfront-porch = <13>; + vsync-len = <2>; + hsync-active = <1>; + vsync-active = <1>; + }; + }; + }; + + sound { + compatible = "ti,da830-evm-audio"; + ti,model = "AM335x-EVM"; + ti,audio-codec = <&tlv320aic3106>; + ti,mcasp-controller = <&mcasp1>; + ti,codec-clock-rate = <12000000>; + ti,audio-routing = + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT", + "LINE1L", "Line In", + "LINE1R", "Line In"; + }; +}; + +&am33xx_pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&matrix_keypad_s0 &volume_keys_s0 &clkout2_pin>; + + matrix_keypad_s0: matrix_keypad_s0 { + pinctrl-single,pins = < + 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */ + 0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a6.gpio1_22 */ + 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a9.gpio1_25 */ + 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a10.gpio1_26 */ + 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.gpio1_27 */ + >; + }; + + volume_keys_s0: volume_keys_s0 { + pinctrl-single,pins = < + 0x150 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_sclk.gpio0_2 */ + 0x154 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_d0.gpio0_3 */ + >; + }; + + i2c0_pins: pinmux_i2c0_pins { + pinctrl-single,pins = < + 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + >; + }; + + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + 0x158 (PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_d1.i2c1_sda */ + 0x15c (PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_cs0.i2c1_scl */ + >; + }; + + uart0_pins: pinmux_uart0_pins { + pinctrl-single,pins = < + 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; + + clkout2_pin: pinmux_clkout2_pin { + pinctrl-single,pins = < + 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ + >; + }; + + nandflash_pins_s0: nandflash_pins_s0 { + pinctrl-single,pins = < + 0x0 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ + 0x4 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ + 0x8 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ + 0xc (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ + 0x10 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ + 0x14 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ + 0x18 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ + 0x1c (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ + 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ + 0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_30 */ + 0x7c (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ + 0x90 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ + 0x94 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ + 0x98 (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */ + 0x9c (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ + >; + }; + + ecap0_pins: backlight_pins { + pinctrl-single,pins = < + 0x164 0x0 /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */ + >; + }; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */ + 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ + 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_td3 */ + 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_td2 */ + 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */ + 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */ + 0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */ + 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */ + 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd3.rgmii1_rd3 */ + 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd2.rgmii1_rd2 */ + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */ + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */ + >; + }; + + cpsw_sleep: cpsw_sleep { + pinctrl-single,pins = < + /* Slave 1 reset value */ + 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* MDIO */ + 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; + + davinci_mdio_sleep: davinci_mdio_sleep { + pinctrl-single,pins = < + /* MDIO reset value */ + 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + lcd_pins_s0: lcd_pins_s0 { + pinctrl-single,pins = < + 0x20 0x01 /* gpmc_ad8.lcd_data16, OUTPUT | MODE1 */ + 0x24 0x01 /* gpmc_ad9.lcd_data17, OUTPUT | MODE1 */ + 0x28 0x01 /* gpmc_ad10.lcd_data18, OUTPUT | MODE1 */ + 0x2c 0x01 /* gpmc_ad11.lcd_data19, OUTPUT | MODE1 */ + 0x30 0x01 /* gpmc_ad12.lcd_data20, OUTPUT | MODE1 */ + 0x34 0x01 /* gpmc_ad13.lcd_data21, OUTPUT | MODE1 */ + 0x38 0x01 /* gpmc_ad14.lcd_data22, OUTPUT | MODE1 */ + 0x3c 0x01 /* gpmc_ad15.lcd_data23, OUTPUT | MODE1 */ + 0xa0 0x00 /* lcd_data0.lcd_data0, OUTPUT | MODE0 */ + 0xa4 0x00 /* lcd_data1.lcd_data1, OUTPUT | MODE0 */ + 0xa8 0x00 /* lcd_data2.lcd_data2, OUTPUT | MODE0 */ + 0xac 0x00 /* lcd_data3.lcd_data3, OUTPUT | MODE0 */ + 0xb0 0x00 /* lcd_data4.lcd_data4, OUTPUT | MODE0 */ + 0xb4 0x00 /* lcd_data5.lcd_data5, OUTPUT | MODE0 */ + 0xb8 0x00 /* lcd_data6.lcd_data6, OUTPUT | MODE0 */ + 0xbc 0x00 /* lcd_data7.lcd_data7, OUTPUT | MODE0 */ + 0xc0 0x00 /* lcd_data8.lcd_data8, OUTPUT | MODE0 */ + 0xc4 0x00 /* lcd_data9.lcd_data9, OUTPUT | MODE0 */ + 0xc8 0x00 /* lcd_data10.lcd_data10, OUTPUT | MODE0 */ + 0xcc 0x00 /* lcd_data11.lcd_data11, OUTPUT | MODE0 */ + 0xd0 0x00 /* lcd_data12.lcd_data12, OUTPUT | MODE0 */ + 0xd4 0x00 /* lcd_data13.lcd_data13, OUTPUT | MODE0 */ + 0xd8 0x00 /* lcd_data14.lcd_data14, OUTPUT | MODE0 */ + 0xdc 0x00 /* lcd_data15.lcd_data15, OUTPUT | MODE0 */ + 0xe0 0x00 /* lcd_vsync.lcd_vsync, OUTPUT | MODE0 */ + 0xe4 0x00 /* lcd_hsync.lcd_hsync, OUTPUT | MODE0 */ + 0xe8 0x00 /* lcd_pclk.lcd_pclk, OUTPUT | MODE0 */ + 0xec 0x00 /* lcd_ac_bias_en.lcd_ac_bias_en, OUTPUT | MODE0 */ + >; + }; + + am335x_evm_audio_pins: am335x_evm_audio_pins { + pinctrl-single,pins = < + 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rx_dv.mcasp1_aclkx */ + 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_txd3.mcasp1_fsx */ + 0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */ + 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */ + >; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + + status = "okay"; + clock-frequency = <400000>; + + tps: tps@2d { + reg = <0x2d>; + }; +}; + +&usb { + status = "okay"; + + control@44e10000 { + status = "okay"; + }; + + usb-phy@47401300 { + status = "okay"; + }; + + usb-phy@47401b00 { + status = "okay"; + }; + + usb@47401000 { + status = "okay"; + }; + + usb@47401800 { + status = "okay"; + dr_mode = "host"; + }; + + dma-controller@07402000 { + status = "okay"; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + + status = "okay"; + clock-frequency = <100000>; + + lis331dlh: lis331dlh@18 { + compatible = "st,lis331dlh", "st,lis3lv02d"; + reg = <0x18>; + Vdd-supply = <&lis3_reg>; + Vdd_IO-supply = <&lis3_reg>; + + st,click-single-x; + st,click-single-y; + st,click-single-z; + st,click-thresh-x = <10>; + st,click-thresh-y = <10>; + st,click-thresh-z = <10>; + st,irq1-click; + st,irq2-click; + st,wakeup-x-lo; + st,wakeup-x-hi; + st,wakeup-y-lo; + st,wakeup-y-hi; + st,wakeup-z-lo; + st,wakeup-z-hi; + st,min-limit-x = <120>; + st,min-limit-y = <120>; + st,min-limit-z = <140>; + st,max-limit-x = <550>; + st,max-limit-y = <550>; + st,max-limit-z = <750>; + }; + + tsl2550: tsl2550@39 { + compatible = "taos,tsl2550"; + reg = <0x39>; + }; + + tmp275: tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + tlv320aic3106: tlv320aic3106@1b { + compatible = "ti,tlv320aic3106"; + reg = <0x1b>; + status = "okay"; + + /* Regulators */ + AVDD-supply = <&vaux2_reg>; + IOVDD-supply = <&vaux2_reg>; + DRVDD-supply = <&vaux2_reg>; + DVDD-supply = <&vbat>; + }; +}; + +&lcdc { + status = "okay"; +}; + +&elm { + status = "okay"; +}; + +&epwmss0 { + status = "okay"; + + ecap0: ecap@48300100 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&ecap0_pins>; + }; +}; + +&gpmc { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&nandflash_pins_s0>; + ranges = <0 0 0x08000000 0x10000000>; /* CS0: NAND */ + nand@0,0 { + reg = <0 0 0>; /* CS0, offset 0 */ + nand-bus-width = <8>; + ti,nand-ecc-opt = "bch8"; + gpmc,device-nand = "true"; + gpmc,device-width = <1>; + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <44>; + gpmc,cs-wr-off-ns = <44>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <34>; + gpmc,adv-wr-off-ns = <44>; + gpmc,we-on-ns = <0>; + gpmc,we-off-ns = <40>; + gpmc,oe-on-ns = <0>; + gpmc,oe-off-ns = <54>; + gpmc,access-ns = <64>; + gpmc,rd-cycle-ns = <82>; + gpmc,wr-cycle-ns = <82>; + gpmc,wait-on-read = "true"; + gpmc,wait-on-write = "true"; + gpmc,bus-turnaround-ns = <0>; + gpmc,cycle2cycle-delay-ns = <0>; + gpmc,clk-activation-ns = <0>; + gpmc,wait-monitoring-ns = <0>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; + + #address-cells = <1>; + #size-cells = <1>; + elm_id = <&elm>; + + /* MTD partition table */ + partition@0 { + label = "SPL1"; + reg = <0x00000000 0x000020000>; + }; + + partition@1 { + label = "SPL2"; + reg = <0x00020000 0x00020000>; + }; + + partition@2 { + label = "SPL3"; + reg = <0x00040000 0x00020000>; + }; + + partition@3 { + label = "SPL4"; + reg = <0x00060000 0x00020000>; + }; + + partition@4 { + label = "U-boot"; + reg = <0x00080000 0x001e0000>; + }; + + partition@5 { + label = "environment"; + reg = <0x00260000 0x00020000>; + }; + + partition@6 { + label = "Kernel"; + reg = <0x00280000 0x00500000>; + }; + + partition@7 { + label = "File-System"; + reg = <0x00780000 0x0F880000>; + }; + }; }; #include "tps65910.dtsi" +&mcasp1 { + pinctrl-names = "default"; + pinctrl-0 = <&am335x_evm_audio_pins>; + + status = "okay"; + + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + /* 4 serializers */ + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 0 0 1 2 + >; + tx-num-evt = <1>; + rx-num-evt = <1>; +}; + &tps { vcc1-supply = <&vbat>; vcc2-supply = <&vbat>; @@ -477,6 +596,8 @@ }; vmmc_reg: regulator@12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; regulator-always-on; }; }; @@ -517,3 +638,17 @@ ti,adc-channels = <4 5 6 7>; }; }; + +&mmc1 { + status = "okay"; + vmmc-supply = <&vmmc_reg>; + bus-width = <4>; +}; + +&sham { + status = "okay"; +}; + +&aes { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index 4f339fa91c5..03febf85fd2 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -31,210 +31,6 @@ reg = <0x80000000 0x10000000>; /* 256 MB */ }; - am33xx_pinmux: pinmux@44e10800 { - pinctrl-names = "default"; - pinctrl-0 = <&gpio_keys_s0 &clkout2_pin>; - - user_leds_s0: user_leds_s0 { - pinctrl-single,pins = < - 0x10 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad4.gpio1_4 */ - 0x14 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad5.gpio1_5 */ - 0x18 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad6.gpio1_6 */ - 0x1c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad7.gpio1_7 */ - >; - }; - - gpio_keys_s0: gpio_keys_s0 { - pinctrl-single,pins = < - 0x94 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_oen_ren.gpio2_3 */ - 0x90 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_advn_ale.gpio2_2 */ - 0x70 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_wait0.gpio0_30 */ - 0x9c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ben0_cle.gpio2_5 */ - >; - }; - - i2c0_pins: pinmux_i2c0_pins { - pinctrl-single,pins = < - 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ - 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ - >; - }; - - uart0_pins: pinmux_uart0_pins { - pinctrl-single,pins = < - 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ - 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ - >; - }; - - clkout2_pin: pinmux_clkout2_pin { - pinctrl-single,pins = < - 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ - >; - }; - - ecap2_pins: backlight_pins { - pinctrl-single,pins = < - 0x19c 0x4 /* mcasp0_ahclkr.ecap2_in_pwm2_out MODE4 */ - >; - }; - - cpsw_default: cpsw_default { - pinctrl-single,pins = < - /* Slave 1 */ - 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */ - 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ - 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_td3 */ - 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_td2 */ - 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */ - 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */ - 0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */ - 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */ - 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd3.rgmii1_rd3 */ - 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd2.rgmii1_rd2 */ - 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */ - 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */ - - /* Slave 2 */ - 0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */ - 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a1.rgmii2_rctl */ - 0x48 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */ - 0x4c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */ - 0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */ - 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */ - 0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */ - 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */ - 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */ - 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */ - 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */ - 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */ - >; - }; - - cpsw_sleep: cpsw_sleep { - pinctrl-single,pins = < - /* Slave 1 reset value */ - 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) - - /* Slave 2 reset value*/ - 0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7) - >; - }; - - davinci_mdio_default: davinci_mdio_default { - pinctrl-single,pins = < - /* MDIO */ - 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ - 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ - >; - }; - - davinci_mdio_sleep: davinci_mdio_sleep { - pinctrl-single,pins = < - /* MDIO reset value */ - 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) - >; - }; - }; - - ocp { - uart0: serial@44e09000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins>; - - status = "okay"; - }; - - i2c0: i2c@44e0b000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins>; - - status = "okay"; - clock-frequency = <400000>; - - tps: tps@2d { - reg = <0x2d>; - }; - - lis331dlh: lis331dlh@18 { - compatible = "st,lis331dlh", "st,lis3lv02d"; - reg = <0x18>; - Vdd-supply = <&lis3_reg>; - Vdd_IO-supply = <&lis3_reg>; - - st,click-single-x; - st,click-single-y; - st,click-single-z; - st,click-thresh-x = <10>; - st,click-thresh-y = <10>; - st,click-thresh-z = <10>; - st,irq1-click; - st,irq2-click; - st,wakeup-x-lo; - st,wakeup-x-hi; - st,wakeup-y-lo; - st,wakeup-y-hi; - st,wakeup-z-lo; - st,wakeup-z-hi; - st,min-limit-x = <120>; - st,min-limit-y = <120>; - st,min-limit-z = <140>; - st,max-limit-x = <550>; - st,max-limit-y = <550>; - st,max-limit-z = <750>; - }; - }; - - musb: usb@47400000 { - status = "okay"; - - control@44e10000 { - status = "okay"; - }; - - usb-phy@47401300 { - status = "okay"; - }; - - usb@47401000 { - status = "okay"; - }; - }; - - epwmss2: epwmss@48304000 { - status = "okay"; - - ecap2: ecap@48304100 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&ecap2_pins>; - }; - }; - }; - vbat: fixedregulator@0 { compatible = "regulator-fixed"; regulator-name = "vbat"; @@ -319,6 +115,240 @@ brightness-levels = <0 58 61 66 75 90 125 170 255>; default-brightness-level = <8>; }; + + sound { + compatible = "ti,da830-evm-audio"; + ti,model = "AM335x-EVMSK"; + ti,audio-codec = <&tlv320aic3106>; + ti,mcasp-controller = <&mcasp1>; + ti,codec-clock-rate = <24576000>; + ti,audio-routing = + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT"; + }; +}; + +&am33xx_pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_s0 &clkout2_pin>; + + user_leds_s0: user_leds_s0 { + pinctrl-single,pins = < + 0x10 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad4.gpio1_4 */ + 0x14 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad5.gpio1_5 */ + 0x18 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad6.gpio1_6 */ + 0x1c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad7.gpio1_7 */ + >; + }; + + gpio_keys_s0: gpio_keys_s0 { + pinctrl-single,pins = < + 0x94 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_oen_ren.gpio2_3 */ + 0x90 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_advn_ale.gpio2_2 */ + 0x70 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_wait0.gpio0_30 */ + 0x9c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ben0_cle.gpio2_5 */ + >; + }; + + i2c0_pins: pinmux_i2c0_pins { + pinctrl-single,pins = < + 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + >; + }; + + uart0_pins: pinmux_uart0_pins { + pinctrl-single,pins = < + 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; + + clkout2_pin: pinmux_clkout2_pin { + pinctrl-single,pins = < + 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ + >; + }; + + ecap2_pins: backlight_pins { + pinctrl-single,pins = < + 0x19c 0x4 /* mcasp0_ahclkr.ecap2_in_pwm2_out MODE4 */ + >; + }; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */ + 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ + 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_td3 */ + 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_td2 */ + 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */ + 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */ + 0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */ + 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */ + 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd3.rgmii1_rd3 */ + 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd2.rgmii1_rd2 */ + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */ + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */ + + /* Slave 2 */ + 0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */ + 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a1.rgmii2_rctl */ + 0x48 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */ + 0x4c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */ + 0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */ + 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */ + 0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */ + 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */ + 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */ + 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */ + 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */ + 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */ + >; + }; + + cpsw_sleep: cpsw_sleep { + pinctrl-single,pins = < + /* Slave 1 reset value */ + 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) + + /* Slave 2 reset value*/ + 0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* MDIO */ + 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; + + davinci_mdio_sleep: davinci_mdio_sleep { + pinctrl-single,pins = < + /* MDIO reset value */ + 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + mcasp1_pins: mcasp1_pins { + pinctrl-single,pins = < + 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */ + 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */ + 0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */ + 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */ + >; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + + status = "okay"; + clock-frequency = <400000>; + + tps: tps@2d { + reg = <0x2d>; + }; + + lis331dlh: lis331dlh@18 { + compatible = "st,lis331dlh", "st,lis3lv02d"; + reg = <0x18>; + Vdd-supply = <&lis3_reg>; + Vdd_IO-supply = <&lis3_reg>; + + st,click-single-x; + st,click-single-y; + st,click-single-z; + st,click-thresh-x = <10>; + st,click-thresh-y = <10>; + st,click-thresh-z = <10>; + st,irq1-click; + st,irq2-click; + st,wakeup-x-lo; + st,wakeup-x-hi; + st,wakeup-y-lo; + st,wakeup-y-hi; + st,wakeup-z-lo; + st,wakeup-z-hi; + st,min-limit-x = <120>; + st,min-limit-y = <120>; + st,min-limit-z = <140>; + st,max-limit-x = <550>; + st,max-limit-y = <550>; + st,max-limit-z = <750>; + }; + + tlv320aic3106: tlv320aic3106@1b { + compatible = "ti,tlv320aic3106"; + reg = <0x1b>; + status = "okay"; + + /* Regulators */ + AVDD-supply = <&vaux2_reg>; + IOVDD-supply = <&vaux2_reg>; + DRVDD-supply = <&vaux2_reg>; + DVDD-supply = <&vbat>; + }; +}; + +&usb { + status = "okay"; + + control@44e10000 { + status = "okay"; + }; + + usb-phy@47401300 { + status = "okay"; + }; + + usb@47401000 { + status = "okay"; + }; +}; + +&epwmss2 { + status = "okay"; + + ecap2: ecap@48304100 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&ecap2_pins>; + }; }; #include "tps65910.dtsi" @@ -393,6 +423,8 @@ }; vmmc_reg: regulator@12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; regulator-always-on; }; }; @@ -419,3 +451,37 @@ phy_id = <&davinci_mdio>, <1>; phy-mode = "rgmii-txid"; }; + +&mmc1 { + status = "okay"; + vmmc-supply = <&vmmc_reg>; + bus-width = <4>; +}; + +&sham { + status = "okay"; +}; + +&aes { + status = "okay"; +}; + +&gpio0 { + ti,no-reset-on-init; +}; + +&mcasp1 { + pinctrl-names = "default"; + pinctrl-0 = <&mcasp1_pins>; + + status = "okay"; + + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + /* 4 serializers */ + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 0 0 1 2 + >; + tx-num-evt = <1>; + rx-num-evt = <1>; +}; diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi new file mode 100644 index 00000000000..61962447931 --- /dev/null +++ b/arch/arm/boot/dts/am335x-igep0033.dtsi @@ -0,0 +1,278 @@ +/* + * am335x-igep0033.dtsi - Device Tree file for IGEP COM AQUILA AM335x + * + * Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +#include "am33xx.dtsi" + +/ { + cpus { + cpu@0 { + cpu0-supply = <&vdd1_reg>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; + + leds { + pinctrl-names = "default"; + pinctrl-0 = <&leds_pins>; + + compatible = "gpio-leds"; + + led@0 { + label = "com:green:user"; + gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + vbat: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vbat"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; + + vmmc: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vmmc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&am33xx_pinmux { + i2c0_pins: pinmux_i2c0_pins { + pinctrl-single,pins = < + 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + >; + }; + + nandflash_pins: pinmux_nandflash_pins { + pinctrl-single,pins = < + 0x0 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ + 0x4 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ + 0x8 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ + 0xc (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ + 0x10 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ + 0x14 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ + 0x18 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ + 0x1c (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ + 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ + 0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_30 */ + 0x7c (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ + 0x90 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ + 0x94 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ + 0x98 (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */ + 0x9c (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ + >; + }; + + uart0_pins: pinmux_uart0_pins { + pinctrl-single,pins = < + 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; + + leds_pins: pinmux_leds_pins { + pinctrl-single,pins = < + 0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */ + >; + }; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <0>; +}; + +&cpsw_emac1 { + phy_id = <&davinci_mdio>, <1>; +}; + +&elm { + status = "okay"; +}; + +&gpmc { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&nandflash_pins>; + + ranges = <0 0 0x08000000 0x10000000>; /* CS0: NAND */ + + nand@0,0 { + reg = <0 0 0>; /* CS0, offset 0 */ + nand-bus-width = <8>; + ti,nand-ecc-opt = "bch8"; + gpmc,device-nand = "true"; + gpmc,device-width = <1>; + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <44>; + gpmc,cs-wr-off-ns = <44>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <34>; + gpmc,adv-wr-off-ns = <44>; + gpmc,we-on-ns = <0>; + gpmc,we-off-ns = <40>; + gpmc,oe-on-ns = <0>; + gpmc,oe-off-ns = <54>; + gpmc,access-ns = <64>; + gpmc,rd-cycle-ns = <82>; + gpmc,wr-cycle-ns = <82>; + gpmc,wait-on-read = "true"; + gpmc,wait-on-write = "true"; + gpmc,bus-turnaround-ns = <0>; + gpmc,cycle2cycle-delay-ns = <0>; + gpmc,clk-activation-ns = <0>; + gpmc,wait-monitoring-ns = <0>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; + + #address-cells = <1>; + #size-cells = <1>; + elm_id = <&elm>; + + /* MTD partition table */ + partition@0 { + label = "SPL"; + reg = <0x00000000 0x000080000>; + }; + + partition@1 { + label = "U-boot"; + reg = <0x00080000 0x001e0000>; + }; + + partition@2 { + label = "U-Boot Env"; + reg = <0x00260000 0x00020000>; + }; + + partition@3 { + label = "Kernel"; + reg = <0x00280000 0x00500000>; + }; + + partition@4 { + label = "File System"; + reg = <0x00780000 0x007880000>; + }; + }; +}; + +&i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + + clock-frequency = <400000>; + + tps: tps@2d { + reg = <0x2d>; + }; +}; + +&mmc1 { + status = "okay"; + vmmc-supply = <&vmmc>; + bus-width = <4>; +}; + +&uart0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; +}; + +#include "tps65910.dtsi" + +&tps { + vcc1-supply = <&vbat>; + vcc2-supply = <&vbat>; + vcc3-supply = <&vbat>; + vcc4-supply = <&vbat>; + vcc5-supply = <&vbat>; + vcc6-supply = <&vbat>; + vcc7-supply = <&vbat>; + vccio-supply = <&vbat>; + + regulators { + vrtc_reg: regulator@0 { + regulator-always-on; + }; + + vio_reg: regulator@1 { + regulator-always-on; + }; + + vdd1_reg: regulator@2 { + /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <912500>; + regulator-max-microvolt = <1312500>; + regulator-boot-on; + regulator-always-on; + }; + + vdd2_reg: regulator@3 { + /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ + regulator-name = "vdd_core"; + regulator-min-microvolt = <912500>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + vdd3_reg: regulator@4 { + regulator-always-on; + }; + + vdig1_reg: regulator@5 { + regulator-always-on; + }; + + vdig2_reg: regulator@6 { + regulator-always-on; + }; + + vpll_reg: regulator@7 { + regulator-always-on; + }; + + vdac_reg: regulator@8 { + regulator-always-on; + }; + + vaux1_reg: regulator@9 { + regulator-always-on; + }; + + vaux2_reg: regulator@10 { + regulator-always-on; + }; + + vaux33_reg: regulator@11 { + regulator-always-on; + }; + + vmmc_reg: regulator@12 { + regulator-always-on; + }; + }; +}; + diff --git a/arch/arm/boot/dts/am335x-nano.dts b/arch/arm/boot/dts/am335x-nano.dts new file mode 100644 index 00000000000..9907b494b99 --- /dev/null +++ b/arch/arm/boot/dts/am335x-nano.dts @@ -0,0 +1,431 @@ +/* + * Copyright (C) 2013 Newflow Ltd - http://www.newflow.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" + +/ { + model = "Newflow AM335x NanoBone"; + compatible = "ti,am33xx"; + + cpus { + cpu@0 { + cpu0-supply = <&dcdc2_reg>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; + + leds { + compatible = "gpio-leds"; + + led@0 { + label = "nanobone:green:usr1"; + gpios = <&gpio1 5 0>; + default-state = "off"; + }; + }; +}; + +&am33xx_pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&misc_pins>; + + misc_pins: misc_pins { + pinctrl-single,pins = < + 0x15c (PIN_OUTPUT | MUX_MODE7) /* spi0_cs0.gpio0_5 */ + >; + }; + + gpmc_pins: gpmc_pins { + pinctrl-single,pins = < + 0x0 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ + 0x4 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ + 0x8 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ + 0xc (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ + 0x10 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ + 0x14 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ + 0x18 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ + 0x1c (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ + 0x20 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad8.gpmc_ad8 */ + 0x24 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad9.gpmc_ad9 */ + 0x28 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad10.gpmc_ad10 */ + 0x2c (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad11.gpmc_ad11 */ + 0x30 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad12.gpmc_ad12 */ + 0x34 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad13.gpmc_ad13 */ + 0x38 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad14.gpmc_ad14 */ + 0x3c (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad15.gpmc_ad15 */ + + 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ + 0x7c (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ + 0x80 (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn1.gpmc_csn1 */ + 0x84 (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn2.gpmc_csn2 */ + 0x88 (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn3.gpmc_csn3 */ + + 0x90 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ + 0x94 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ + 0x98 (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */ + 0x9c (PIN_OUTPUT | MUX_MODE0) /* gpmc_ben0_cle.gpmc_ben0_cle */ + + 0xa4 (PIN_OUTPUT | MUX_MODE1) /* lcd_data1.gpmc_a1 */ + 0xa8 (PIN_OUTPUT | MUX_MODE1) /* lcd_data2.gpmc_a2 */ + 0xac (PIN_OUTPUT | MUX_MODE1) /* lcd_data3.gpmc_a3 */ + 0xb0 (PIN_OUTPUT | MUX_MODE1) /* lcd_data4.gpmc_a4 */ + 0xb4 (PIN_OUTPUT | MUX_MODE1) /* lcd_data5.gpmc_a5 */ + 0xb8 (PIN_OUTPUT | MUX_MODE1) /* lcd_data6.gpmc_a6 */ + 0xbc (PIN_OUTPUT | MUX_MODE1) /* lcd_data7.gpmc_a7 */ + + 0xe0 (PIN_OUTPUT | MUX_MODE1) /* lcd_vsync.gpmc_a8 */ + 0xe4 (PIN_OUTPUT | MUX_MODE1) /* lcd_hsync.gpmc_a9 */ + 0xe8 (PIN_OUTPUT | MUX_MODE1) /* lcd_pclk.gpmc_a10 */ + >; + }; + + i2c0_pins: i2c0_pins { + pinctrl-single,pins = < + 0x188 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + 0x18c (PIN_INPUT_PULLDOWN | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + >; + }; + + uart0_pins: uart0_pins { + pinctrl-single,pins = < + 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + 0x174 (PIN_OUTPUT | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; + + uart1_pins: uart1_pins { + pinctrl-single,pins = < + 0x178 (PIN_OUTPUT | MUX_MODE7) /* uart1_ctsn.uart1_ctsn */ + 0x17c (PIN_OUTPUT | MUX_MODE7) /* uart1_rtsn.uart1_rtsn */ + 0x180 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */ + 0x184 (PIN_OUTPUT | MUX_MODE0) /* uart1_txd.uart1_txd */ + >; + }; + + uart2_pins: uart2_pins { + pinctrl-single,pins = < + 0xc0 (PIN_INPUT_PULLUP | MUX_MODE7) /* lcd_data8.gpio2[14] */ + 0xc4 (PIN_OUTPUT | MUX_MODE7) /* lcd_data9.gpio2[15] */ + 0x150 (PIN_INPUT | MUX_MODE1) /* spi0_sclk.uart2_rxd */ + 0x154 (PIN_OUTPUT | MUX_MODE1) /* spi0_d0.uart2_txd */ + >; + }; + + uart3_pins: uart3_pins { + pinctrl-single,pins = < + 0xc8 (PIN_INPUT_PULLUP | MUX_MODE6) /* lcd_data10.uart3_ctsn */ + 0xcc (PIN_OUTPUT | MUX_MODE6) /* lcd_data11.uart3_rtsn */ + 0x160 (PIN_INPUT | MUX_MODE1) /* spi0_cs1.uart3_rxd */ + 0x164 (PIN_OUTPUT | MUX_MODE1) /* ecap0_in_pwm0_out.uart3_txd */ + >; + }; + + uart4_pins: uart4_pins { + pinctrl-single,pins = < + 0xd0 (PIN_INPUT_PULLUP | MUX_MODE6) /* lcd_data12.uart4_ctsn */ + 0xd4 (PIN_OUTPUT | MUX_MODE6) /* lcd_data13.uart4_rtsn */ + 0x168 (PIN_INPUT | MUX_MODE1) /* uart0_ctsn.uart4_rxd */ + 0x16c (PIN_OUTPUT | MUX_MODE1) /* uart0_rtsn.uart4_txd */ + >; + }; + + uart5_pins: uart5_pins { + pinctrl-single,pins = < + 0xd8 (PIN_INPUT | MUX_MODE4) /* lcd_data14.uart5_rxd */ + 0x144 (PIN_OUTPUT | MUX_MODE3) /* rmiii1_refclk.uart5_txd */ + >; + }; + + mmc1_pins: mmc1_pins { + pinctrl-single,pins = < + 0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */ + 0xf4 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */ + 0xf8 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */ + 0xfc (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */ + 0x100 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */ + 0x104 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ + 0x1e8 (PIN_INPUT_PULLUP | MUX_MODE7) /* emu1.gpio3[8] */ + 0x1a0 (PIN_INPUT_PULLUP | MUX_MODE7) /* mcasp0_aclkr.gpio3[18] */ + >; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "okay"; + rts-gpio = <&gpio0 13 GPIO_ACTIVE_HIGH>; + rs485-rts-active-high; + rs485-rx-during-tx; + rs485-rts-delay = <1 1>; + linux,rs485-enabled-at-boot-time; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "okay"; + rts-gpio = <&gpio2 15 GPIO_ACTIVE_HIGH>; + rs485-rts-active-high; + rs485-rts-delay = <1 1>; + linux,rs485-enabled-at-boot-time; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&uart5_pins>; + status = "okay"; +}; + +&i2c0 { + status = "okay"; + pinctrl-names = "default"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + + gpio@20 { + compatible = "mcp,mcp23017"; + reg = <0x20>; + }; + + tps: tps@24 { + reg = <0x24>; + }; + + eeprom@53 { + compatible = "mcp,24c02"; + reg = <0x53>; + pagesize = <8>; + }; + + rtc@68 { + compatible = "dallas,ds1307"; + reg = <0x68>; + }; +}; + +&elm { + status = "okay"; +}; + +&gpmc { + compatible = "ti,am3352-gpmc"; + ti,hwmods = "gpmc"; + status = "okay"; + gpmc,num-waitpins = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&gpmc_pins>; + + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0x08000000 0x08000000>; /* CS0: NOR 128M */ + + nor@0,0 { + reg = <0 0x00000000 0x08000000>; + compatible = "cfi-flash"; + linux,mtd-name = "spansion,s29gl010p11t"; + bank-width = <2>; + + gpmc,mux-add-data = <2>; + + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <160>; + gpmc,cs-wr-off-ns = <160>; + gpmc,adv-on-ns = <10>; + gpmc,adv-rd-off-ns = <30>; + gpmc,adv-wr-off-ns = <30>; + gpmc,oe-on-ns = <40>; + gpmc,oe-off-ns = <160>; + gpmc,we-on-ns = <40>; + gpmc,we-off-ns = <160>; + gpmc,rd-cycle-ns = <160>; + gpmc,wr-cycle-ns = <160>; + gpmc,access-ns = <150>; + gpmc,page-burst-access-ns = <10>; + gpmc,cycle2cycle-samecsen; + gpmc,cycle2cycle-delay-ns = <20>; + gpmc,wr-data-mux-bus-ns = <70>; + gpmc,wr-access-ns = <80>; + + #address-cells = <1>; + #size-cells = <1>; + + /* + MTD partition table + =================== + +------------+-->0x00000000-> U-Boot start + | | + | |-->0x000BFFFF-> U-Boot end + | |-->0x000C0000-> ENV1 start + | | + | |-->0x000DFFFF-> ENV1 end + | |-->0x000E0000-> ENV2 start + | | + | |-->0x000FFFFF-> ENV2 end + | |-->0x00100000-> Kernel start + | | + | |-->0x004FFFFF-> Kernel end + | |-->0x00500000-> File system start + | | + | |-->0x014FFFFF-> File system end + | |-->0x01500000-> User data start + | | + | |-->0x03FFFFFF-> User data end + | |-->0x04000000-> Data storage start + | | + +------------+-->0x08000000-> NOR end (Free end) + */ + partition@0 { + label = "boot"; + reg = <0x00000000 0x000c0000>; /* 768KB */ + }; + + partition@1 { + label = "env1"; + reg = <0x000c0000 0x00020000>; /* 128KB */ + }; + + partition@2 { + label = "env2"; + reg = <0x000e0000 0x00020000>; /* 128KB */ + }; + + partition@3 { + label = "kernel"; + reg = <0x00100000 0x00400000>; /* 4MB */ + }; + + partition@4 { + label = "rootfs"; + reg = <0x00500000 0x01000000>; /* 16MB */ + }; + + partition@5 { + label = "user"; + reg = <0x01500000 0x02b00000>; /* 43MB */ + }; + + partition@6 { + label = "data"; + reg = <0x04000000 0x04000000>; /* 64MB */ + }; + }; +}; + +&mac { + dual_emac = <1>; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <0>; + dual_emac_res_vlan = <1>; +}; + +&cpsw_emac1 { + phy_id = <&davinci_mdio>, <1>; + dual_emac_res_vlan = <2>; +}; + +&mmc1 { + status = "okay"; + vmmc-supply = <&ldo4_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + bus-width = <4>; + cd-gpios = <&gpio3 8 0>; + wp-gpios = <&gpio3 18 0>; +}; + +#include "tps65217.dtsi" + +&tps { + regulators { + dcdc1_reg: regulator@0 { + /* +1.5V voltage with ±4% tolerance */ + regulator-min-microvolt = <1450000>; + regulator-max-microvolt = <1550000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc2_reg: regulator@1 { + /* VDD_MPU voltage limits 0.95V - 1.1V with ±4% tolerance */ + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <915000>; + regulator-max-microvolt = <1140000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc3_reg: regulator@2 { + /* VDD_CORE voltage limits 0.95V - 1.1V with ±4% tolerance */ + regulator-name = "vdd_core"; + regulator-min-microvolt = <915000>; + regulator-max-microvolt = <1140000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: regulator@3 { + /* +1.8V voltage with ±4% tolerance */ + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <1870000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2_reg: regulator@4 { + /* +3.3V voltage with ±4% tolerance */ + regulator-min-microvolt = <3175000>; + regulator-max-microvolt = <3430000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3_reg: regulator@5 { + /* +1.8V voltage with ±4% tolerance */ + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <1870000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4_reg: regulator@6 { + /* +3.3V voltage with ±4% tolerance */ + regulator-min-microvolt = <3175000>; + regulator-max-microvolt = <3430000>; + regulator-boot-on; + regulator-always-on; + }; + }; +}; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index f9c5da9c7fe..fcb9c8e42ab 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -18,6 +18,9 @@ interrupt-parent = <&intc>; aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; serial0 = &uart0; serial1 = &uart1; serial2 = &uart2; @@ -30,6 +33,8 @@ usb1 = &usb1; phy0 = &usb0_phy; phy1 = &usb1_phy; + ethernet0 = &cpsw_emac0; + ethernet1 = &cpsw_emac1; }; cpus { @@ -57,6 +62,11 @@ }; }; + pmu { + compatible = "arm,cortex-a8-pmu"; + interrupts = <3>; + }; + /* * The soc node represents the soc top level view. It is uses for IPs * that are not memory mapped in the MPU view or for the MPU itself. @@ -100,13 +110,25 @@ reg = <0x48200000 0x1000>; }; + edma: edma@49000000 { + compatible = "ti,edma3"; + ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2"; + reg = <0x49000000 0x10000>, + <0x44e10f90 0x10>; + interrupts = <12 13 14>; + #dma-cells = <1>; + dma-channels = <64>; + ti,edma-regions = <4>; + ti,edma-slots = <256>; + }; + gpio0: gpio@44e07000 { compatible = "ti,omap4-gpio"; ti,hwmods = "gpio1"; gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; reg = <0x44e07000 0x1000>; interrupts = <96>; }; @@ -117,7 +139,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; reg = <0x4804c000 0x1000>; interrupts = <98>; }; @@ -128,7 +150,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; reg = <0x481ac000 0x1000>; interrupts = <32>; }; @@ -139,7 +161,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; reg = <0x481ae000 0x1000>; interrupts = <62>; }; @@ -228,6 +250,50 @@ status = "disabled"; }; + mmc1: mmc@48060000 { + compatible = "ti,omap4-hsmmc"; + ti,hwmods = "mmc1"; + ti,dual-volt; + ti,needs-special-reset; + ti,needs-special-hs-handling; + dmas = <&edma 24 + &edma 25>; + dma-names = "tx", "rx"; + interrupts = <64>; + interrupt-parent = <&intc>; + reg = <0x48060000 0x1000>; + status = "disabled"; + }; + + mmc2: mmc@481d8000 { + compatible = "ti,omap4-hsmmc"; + ti,hwmods = "mmc2"; + ti,needs-special-reset; + dmas = <&edma 2 + &edma 3>; + dma-names = "tx", "rx"; + interrupts = <28>; + interrupt-parent = <&intc>; + reg = <0x481d8000 0x1000>; + status = "disabled"; + }; + + mmc3: mmc@47810000 { + compatible = "ti,omap4-hsmmc"; + ti,hwmods = "mmc3"; + ti,needs-special-reset; + interrupts = <29>; + interrupt-parent = <&intc>; + reg = <0x47810000 0x1000>; + status = "disabled"; + }; + + hwspinlock: spinlock@480ca000 { + compatible = "ti,omap4-hwspinlock"; + reg = <0x480ca000 0x1000>; + ti,hwmods = "spinlock"; + }; + wdt2: wdt@44e35000 { compatible = "ti,omap3-wdt"; ti,hwmods = "wd_timer2"; @@ -323,6 +389,11 @@ interrupts = <65>; ti,spi-num-cs = <2>; ti,hwmods = "spi0"; + dmas = <&edma 16 + &edma 17 + &edma 18 + &edma 19>; + dma-names = "tx0", "rx0", "tx1", "rx1"; status = "disabled"; }; @@ -334,6 +405,11 @@ interrupts = <125>; ti,spi-num-cs = <2>; ti,hwmods = "spi1"; + dmas = <&edma 42 + &edma 43 + &edma 44 + &edma 45>; + dma-names = "tx0", "rx0", "tx1", "rx1"; status = "disabled"; }; @@ -346,7 +422,7 @@ ti,hwmods = "usb_otg_hs"; status = "disabled"; - ctrl_mod: control@44e10000 { + usb_ctrl_mod: control@44e10000 { compatible = "ti,am335x-usb-ctrl-module"; reg = <0x44e10620 0x10 0x44e10648 0x4>; @@ -359,7 +435,7 @@ reg = <0x47401300 0x100>; reg-names = "phy"; status = "disabled"; - ti,ctrl_mod = <&ctrl_mod>; + ti,ctrl_mod = <&usb_ctrl_mod>; }; usb0: usb@47401000 { @@ -407,7 +483,7 @@ reg = <0x47401b00 0x100>; reg-names = "phy"; status = "disabled"; - ti,ctrl_mod = <&ctrl_mod>; + ti,ctrl_mod = <&usb_ctrl_mod>; }; usb1: usb@47401800 { @@ -607,6 +683,7 @@ reg = <0x44d00000 0x4000 /* M3 UMEM */ 0x44d80000 0x2000>; /* M3 DMEM */ ti,hwmods = "wkup_m3"; + ti,no-reset-on-init; }; elm: elm@48080000 { @@ -617,6 +694,15 @@ status = "disabled"; }; + lcdc: lcdc@4830e000 { + compatible = "ti,am33xx-tilcdc"; + reg = <0x4830e000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <36>; + ti,hwmods = "lcdc"; + status = "disabled"; + }; + tscadc: tscadc@44e0d000 { compatible = "ti,am3359-tscadc"; reg = <0x44e0d000 0x1000>; @@ -637,6 +723,7 @@ gpmc: gpmc@50000000 { compatible = "ti,am3352-gpmc"; ti,hwmods = "gpmc"; + ti,no-idle-on-init; reg = <0x50000000 0x2000>; interrupts = <100>; gpmc,num-cs = <7>; @@ -645,5 +732,59 @@ #size-cells = <1>; status = "disabled"; }; + + sham: sham@53100000 { + compatible = "ti,omap4-sham"; + ti,hwmods = "sham"; + reg = <0x53100000 0x200>; + interrupts = <109>; + dmas = <&edma 36>; + dma-names = "rx"; + }; + + aes: aes@53500000 { + compatible = "ti,omap4-aes"; + ti,hwmods = "aes"; + reg = <0x53500000 0xa0>; + interrupts = <103>; + dmas = <&edma 6>, + <&edma 5>; + dma-names = "tx", "rx"; + }; + + mcasp0: mcasp@48038000 { + compatible = "ti,am33xx-mcasp-audio"; + ti,hwmods = "mcasp0"; + reg = <0x48038000 0x2000>, + <0x46000000 0x400000>; + reg-names = "mpu", "dat"; + interrupts = <80>, <81>; + interrupts-names = "tx", "rx"; + status = "disabled"; + dmas = <&edma 8>, + <&edma 9>; + dma-names = "tx", "rx"; + }; + + mcasp1: mcasp@4803C000 { + compatible = "ti,am33xx-mcasp-audio"; + ti,hwmods = "mcasp1"; + reg = <0x4803C000 0x2000>, + <0x46400000 0x400000>; + reg-names = "mpu", "dat"; + interrupts = <82>, <83>; + interrupts-names = "tx", "rx"; + status = "disabled"; + dmas = <&edma 10>, + <&edma 11>; + dma-names = "tx", "rx"; + }; + + rng: rng@48310000 { + compatible = "ti,omap4-rng"; + ti,hwmods = "rng"; + reg = <0x48310000 0x2000>; + interrupts = <111>; + }; }; }; diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index ddc1df77ac5..974d103ab3b 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -18,12 +18,21 @@ aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; serial0 = &uart0; + ethernet0 = &cpsw_emac0; + ethernet1 = &cpsw_emac1; }; cpus { + #address-cells = <1>; + #size-cells = <0>; cpu@0 { compatible = "arm,cortex-a9"; + device_type = "cpu"; + reg = <0>; }; }; @@ -35,16 +44,100 @@ <0x48240100 0x0100>; }; + l2-cache-controller@48242000 { + compatible = "arm,pl310-cache"; + reg = <0x48242000 0x1000>; + cache-unified; + cache-level = <2>; + }; + + am43xx_pinmux: pinmux@44e10800 { + compatible = "pinctrl-single"; + reg = <0x44e10800 0x31c>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0xffffffff>; + }; + ocp { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; + ti,hwmods = "l3_main"; + + edma: edma@49000000 { + compatible = "ti,edma3"; + ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2"; + reg = <0x49000000 0x10000>, + <0x44e10f90 0x10>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + dma-channels = <64>; + ti,edma-regions = <4>; + ti,edma-slots = <256>; + }; uart0: serial@44e09000 { compatible = "ti,am4372-uart","ti,omap2-uart"; reg = <0x44e09000 0x2000>; interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "uart1"; + }; + + uart1: serial@48022000 { + compatible = "ti,am4372-uart","ti,omap2-uart"; + reg = <0x48022000 0x2000>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "uart2"; + status = "disabled"; + }; + + uart2: serial@48024000 { + compatible = "ti,am4372-uart","ti,omap2-uart"; + reg = <0x48024000 0x2000>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "uart3"; + status = "disabled"; + }; + + uart3: serial@481a6000 { + compatible = "ti,am4372-uart","ti,omap2-uart"; + reg = <0x481a6000 0x2000>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "uart4"; + status = "disabled"; + }; + + uart4: serial@481a8000 { + compatible = "ti,am4372-uart","ti,omap2-uart"; + reg = <0x481a8000 0x2000>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "uart5"; + status = "disabled"; + }; + + uart5: serial@481aa000 { + compatible = "ti,am4372-uart","ti,omap2-uart"; + reg = <0x481aa000 0x2000>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "uart6"; + status = "disabled"; + }; + + mailbox: mailbox@480C8000 { + compatible = "ti,omap4-mailbox"; + reg = <0x480C8000 0x200>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "mailbox"; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <8>; + ti,mbox-names = "wkup_m3"; + ti,mbox-data = <0 0 0 0>; + status = "disabled"; }; timer1: timer@44e31000 { @@ -52,17 +145,523 @@ reg = <0x44e31000 0x400>; interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; ti,timer-alwon; + ti,hwmods = "timer1"; }; timer2: timer@48040000 { compatible = "ti,am4372-timer","ti,am335x-timer"; reg = <0x48040000 0x400>; interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "timer2"; + }; + + timer3: timer@48042000 { + compatible = "ti,am4372-timer","ti,am335x-timer"; + reg = <0x48042000 0x400>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "timer3"; + status = "disabled"; + }; + + timer4: timer@48044000 { + compatible = "ti,am4372-timer","ti,am335x-timer"; + reg = <0x48044000 0x400>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-pwm; + ti,hwmods = "timer4"; + status = "disabled"; + }; + + timer5: timer@48046000 { + compatible = "ti,am4372-timer","ti,am335x-timer"; + reg = <0x48046000 0x400>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-pwm; + ti,hwmods = "timer5"; + status = "disabled"; + }; + + timer6: timer@48048000 { + compatible = "ti,am4372-timer","ti,am335x-timer"; + reg = <0x48048000 0x400>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-pwm; + ti,hwmods = "timer6"; + status = "disabled"; + }; + + timer7: timer@4804a000 { + compatible = "ti,am4372-timer","ti,am335x-timer"; + reg = <0x4804a000 0x400>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-pwm; + ti,hwmods = "timer7"; + status = "disabled"; + }; + + timer8: timer@481c1000 { + compatible = "ti,am4372-timer","ti,am335x-timer"; + reg = <0x481c1000 0x400>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "timer8"; + status = "disabled"; + }; + + timer9: timer@4833d000 { + compatible = "ti,am4372-timer","ti,am335x-timer"; + reg = <0x4833d000 0x400>; + interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "timer9"; + status = "disabled"; + }; + + timer10: timer@4833f000 { + compatible = "ti,am4372-timer","ti,am335x-timer"; + reg = <0x4833f000 0x400>; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "timer10"; + status = "disabled"; + }; + + timer11: timer@48341000 { + compatible = "ti,am4372-timer","ti,am335x-timer"; + reg = <0x48341000 0x400>; + interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "timer11"; + status = "disabled"; }; counter32k: counter@44e86000 { compatible = "ti,am4372-counter32k","ti,omap-counter32k"; reg = <0x44e86000 0x40>; + ti,hwmods = "counter_32k"; + }; + + rtc@44e3e000 { + compatible = "ti,am4372-rtc","ti,da830-rtc"; + reg = <0x44e3e000 0x1000>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "rtc"; + status = "disabled"; + }; + + wdt@44e35000 { + compatible = "ti,am4372-wdt","ti,omap3-wdt"; + reg = <0x44e35000 0x1000>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "wd_timer2"; + }; + + gpio0: gpio@44e07000 { + compatible = "ti,am4372-gpio","ti,omap4-gpio"; + reg = <0x44e07000 0x1000>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + ti,hwmods = "gpio1"; + status = "disabled"; + }; + + gpio1: gpio@4804c000 { + compatible = "ti,am4372-gpio","ti,omap4-gpio"; + reg = <0x4804c000 0x1000>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + ti,hwmods = "gpio2"; + status = "disabled"; + }; + + gpio2: gpio@481ac000 { + compatible = "ti,am4372-gpio","ti,omap4-gpio"; + reg = <0x481ac000 0x1000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + ti,hwmods = "gpio3"; + status = "disabled"; + }; + + gpio3: gpio@481ae000 { + compatible = "ti,am4372-gpio","ti,omap4-gpio"; + reg = <0x481ae000 0x1000>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + ti,hwmods = "gpio4"; + status = "disabled"; + }; + + gpio4: gpio@48320000 { + compatible = "ti,am4372-gpio","ti,omap4-gpio"; + reg = <0x48320000 0x1000>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + ti,hwmods = "gpio5"; + status = "disabled"; + }; + + gpio5: gpio@48322000 { + compatible = "ti,am4372-gpio","ti,omap4-gpio"; + reg = <0x48322000 0x1000>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + ti,hwmods = "gpio6"; + status = "disabled"; + }; + + i2c0: i2c@44e0b000 { + compatible = "ti,am4372-i2c","ti,omap4-i2c"; + reg = <0x44e0b000 0x1000>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "i2c1"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@4802a000 { + compatible = "ti,am4372-i2c","ti,omap4-i2c"; + reg = <0x4802a000 0x1000>; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "i2c2"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@4819c000 { + compatible = "ti,am4372-i2c","ti,omap4-i2c"; + reg = <0x4819c000 0x1000>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "i2c3"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi0: spi@48030000 { + compatible = "ti,am4372-mcspi","ti,omap4-mcspi"; + reg = <0x48030000 0x400>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "spi0"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + mmc1: mmc@48060000 { + compatible = "ti,omap4-hsmmc"; + reg = <0x48060000 0x1000>; + ti,hwmods = "mmc1"; + ti,dual-volt; + ti,needs-special-reset; + dmas = <&edma 24 + &edma 25>; + dma-names = "tx", "rx"; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + mmc2: mmc@481d8000 { + compatible = "ti,omap4-hsmmc"; + reg = <0x481d8000 0x1000>; + ti,hwmods = "mmc2"; + ti,needs-special-reset; + dmas = <&edma 2 + &edma 3>; + dma-names = "tx", "rx"; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + mmc3: mmc@47810000 { + compatible = "ti,omap4-hsmmc"; + reg = <0x47810000 0x1000>; + ti,hwmods = "mmc3"; + ti,needs-special-reset; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + spi1: spi@481a0000 { + compatible = "ti,am4372-mcspi","ti,omap4-mcspi"; + reg = <0x481a0000 0x400>; + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "spi1"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi2: spi@481a2000 { + compatible = "ti,am4372-mcspi","ti,omap4-mcspi"; + reg = <0x481a2000 0x400>; + interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "spi2"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi3: spi@481a4000 { + compatible = "ti,am4372-mcspi","ti,omap4-mcspi"; + reg = <0x481a4000 0x400>; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "spi3"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi4: spi@48345000 { + compatible = "ti,am4372-mcspi","ti,omap4-mcspi"; + reg = <0x48345000 0x400>; + interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "spi4"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + mac: ethernet@4a100000 { + compatible = "ti,am4372-cpsw","ti,cpsw"; + reg = <0x4a100000 0x800 + 0x4a101200 0x100>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <1>; + ti,hwmods = "cpgmac0"; + status = "disabled"; + cpdma_channels = <8>; + ale_entries = <1024>; + bd_ram_size = <0x2000>; + no_bd_ram = <0>; + rx_descs = <64>; + mac_control = <0x20>; + slaves = <2>; + active_slave = <0>; + cpts_clock_mult = <0x80000000>; + cpts_clock_shift = <29>; + ranges; + + davinci_mdio: mdio@4a101000 { + compatible = "ti,am4372-mdio","ti,davinci_mdio"; + reg = <0x4a101000 0x100>; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "davinci_mdio"; + bus_freq = <1000000>; + status = "disabled"; + }; + + cpsw_emac0: slave@4a100200 { + /* Filled in by U-Boot */ + mac-address = [ 00 00 00 00 00 00 ]; + }; + + cpsw_emac1: slave@4a100300 { + /* Filled in by U-Boot */ + mac-address = [ 00 00 00 00 00 00 ]; + }; + }; + + epwmss0: epwmss@48300000 { + compatible = "ti,am4372-pwmss","ti,am33xx-pwmss"; + reg = <0x48300000 0x10>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + ti,hwmods = "epwmss0"; + status = "disabled"; + + ecap0: ecap@48300100 { + compatible = "ti,am4372-ecap","ti,am33xx-ecap"; + reg = <0x48300100 0x80>; + ti,hwmods = "ecap0"; + status = "disabled"; + }; + + ehrpwm0: ehrpwm@48300200 { + compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm"; + reg = <0x48300200 0x80>; + ti,hwmods = "ehrpwm0"; + status = "disabled"; + }; + }; + + epwmss1: epwmss@48302000 { + compatible = "ti,am4372-pwmss","ti,am33xx-pwmss"; + reg = <0x48302000 0x10>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + ti,hwmods = "epwmss1"; + status = "disabled"; + + ecap1: ecap@48302100 { + compatible = "ti,am4372-ecap","ti,am33xx-ecap"; + reg = <0x48302100 0x80>; + ti,hwmods = "ecap1"; + status = "disabled"; + }; + + ehrpwm1: ehrpwm@48302200 { + compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm"; + reg = <0x48302200 0x80>; + ti,hwmods = "ehrpwm1"; + status = "disabled"; + }; + }; + + epwmss2: epwmss@48304000 { + compatible = "ti,am4372-pwmss","ti,am33xx-pwmss"; + reg = <0x48304000 0x10>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + ti,hwmods = "epwmss2"; + status = "disabled"; + + ecap2: ecap@48304100 { + compatible = "ti,am4372-ecap","ti,am33xx-ecap"; + reg = <0x48304100 0x80>; + ti,hwmods = "ecap2"; + status = "disabled"; + }; + + ehrpwm2: ehrpwm@48304200 { + compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm"; + reg = <0x48304200 0x80>; + ti,hwmods = "ehrpwm2"; + status = "disabled"; + }; + }; + + epwmss3: epwmss@48306000 { + compatible = "ti,am4372-pwmss","ti,am33xx-pwmss"; + reg = <0x48306000 0x10>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + ti,hwmods = "epwmss3"; + status = "disabled"; + + ehrpwm3: ehrpwm@48306200 { + compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm"; + reg = <0x48306200 0x80>; + ti,hwmods = "ehrpwm3"; + status = "disabled"; + }; + }; + + epwmss4: epwmss@48308000 { + compatible = "ti,am4372-pwmss","ti,am33xx-pwmss"; + reg = <0x48308000 0x10>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + ti,hwmods = "epwmss4"; + status = "disabled"; + + ehrpwm4: ehrpwm@48308200 { + compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm"; + reg = <0x48308200 0x80>; + ti,hwmods = "ehrpwm4"; + status = "disabled"; + }; + }; + + epwmss5: epwmss@4830a000 { + compatible = "ti,am4372-pwmss","ti,am33xx-pwmss"; + reg = <0x4830a000 0x10>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + ti,hwmods = "epwmss5"; + status = "disabled"; + + ehrpwm5: ehrpwm@4830a200 { + compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm"; + reg = <0x4830a200 0x80>; + ti,hwmods = "ehrpwm5"; + status = "disabled"; + }; + }; + + sham: sham@53100000 { + compatible = "ti,omap5-sham"; + ti,hwmods = "sham"; + reg = <0x53100000 0x300>; + dmas = <&edma 36>; + dma-names = "rx"; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + }; + + aes: aes@53501000 { + compatible = "ti,omap4-aes"; + ti,hwmods = "aes"; + reg = <0x53501000 0xa0>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&edma 6 + &edma 5>; + dma-names = "tx", "rx"; + }; + + des: des@53701000 { + compatible = "ti,omap4-des"; + ti,hwmods = "des"; + reg = <0x53701000 0xa0>; + interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&edma 34 + &edma 33>; + dma-names = "tx", "rx"; + }; + + mcasp0: mcasp@48038000 { + compatible = "ti,am33xx-mcasp-audio"; + ti,hwmods = "mcasp0"; + reg = <0x48038000 0x2000>, + <0x46000000 0x400000>; + reg-names = "mpu", "dat"; + interrupts = <80>, <81>; + interrupts-names = "tx", "rx"; + status = "disabled"; + dmas = <&edma 8>, + <&edma 9>; + dma-names = "tx", "rx"; + }; + + mcasp1: mcasp@4803C000 { + compatible = "ti,am33xx-mcasp-audio"; + ti,hwmods = "mcasp1"; + reg = <0x4803C000 0x2000>, + <0x46400000 0x400000>; + reg-names = "mpu", "dat"; + interrupts = <82>, <83>; + interrupts-names = "tx", "rx"; + status = "disabled"; + dmas = <&edma 10>, + <&edma 11>; + dma-names = "tx", "rx"; }; }; }; diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index 74174d48f47..fbf9c4c7a94 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -11,8 +11,176 @@ /dts-v1/; #include "am4372.dtsi" +#include <dt-bindings/pinctrl/am43xx.h> +#include <dt-bindings/gpio/gpio.h> / { model = "TI AM43x EPOS EVM"; compatible = "ti,am43x-epos-evm","ti,am4372","ti,am43"; + + vmmcsd_fixed: fixedregulator-sd { + compatible = "regulator-fixed"; + regulator-name = "vmmcsd_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + }; + + am43xx_pinmux: pinmux@44e10800 { + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs */ + 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */ + 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txen.rmii1_txen */ + 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxdv.rmii1_rxdv */ + 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */ + 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */ + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */ + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */ + 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_refclk.rmii1_refclk */ + >; + }; + + cpsw_sleep: cpsw_sleep { + pinctrl-single,pins = < + /* Slave 1 reset value */ + 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* MDIO */ + 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; + + davinci_mdio_sleep: davinci_mdio_sleep { + pinctrl-single,pins = < + /* MDIO reset value */ + 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + i2c0_pins: pinmux_i2c0_pins { + pinctrl-single,pins = < + 0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + 0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + >; + }; + }; + + matrix_keypad: matrix_keypad@0 { + compatible = "gpio-matrix-keypad"; + debounce-delay-ms = <5>; + col-scan-delay-us = <2>; + + row-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH /* Bank0, pin12 */ + &gpio0 13 GPIO_ACTIVE_HIGH /* Bank0, pin13 */ + &gpio0 14 GPIO_ACTIVE_HIGH /* Bank0, pin14 */ + &gpio0 15 GPIO_ACTIVE_HIGH>; /* Bank0, pin15 */ + + col-gpios = <&gpio3 9 GPIO_ACTIVE_HIGH /* Bank3, pin9 */ + &gpio3 10 GPIO_ACTIVE_HIGH /* Bank3, pin10 */ + &gpio2 18 GPIO_ACTIVE_HIGH /* Bank2, pin18 */ + &gpio2 19 GPIO_ACTIVE_HIGH>; /* Bank2, pin19 */ + + linux,keymap = <0x00000201 /* P1 */ + 0x01000204 /* P4 */ + 0x02000207 /* P7 */ + 0x0300020a /* NUMERIC_STAR */ + 0x00010202 /* P2 */ + 0x01010205 /* P5 */ + 0x02010208 /* P8 */ + 0x03010200 /* P0 */ + 0x00020203 /* P3 */ + 0x01020206 /* P6 */ + 0x02020209 /* P9 */ + 0x0302020b /* NUMERIC_POUND */ + 0x00030067 /* UP */ + 0x0103006a /* RIGHT */ + 0x0203006c /* DOWN */ + 0x03030069>; /* LEFT */ + }; +}; + +&mmc1 { + status = "okay"; + vmmc-supply = <&vmmcsd_fixed>; + bus-width = <4>; +}; + +&mac { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cpsw_default>; + pinctrl-1 = <&cpsw_sleep>; + status = "okay"; +}; + +&davinci_mdio { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_default>; + pinctrl-1 = <&davinci_mdio_sleep>; + status = "okay"; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <16>; + phy-mode = "rmii"; +}; + +&cpsw_emac1 { + phy_id = <&davinci_mdio>, <1>; + phy-mode = "rmii"; +}; + +&i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + + at24@50 { + compatible = "at24,24c256"; + pagesize = <64>; + reg = <0x50>; + }; + + pixcir_ts@5c { + compatible = "pixcir,pixcir_ts"; + reg = <0x5c>; + interrupt-parent = <&gpio1>; + interrupts = <17 0>; + + attb-gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>; + + x-size = <1024>; + y-size = <768>; + }; +}; + +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio2 { + status = "okay"; +}; + +&gpio3 { + status = "okay"; }; diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts new file mode 100644 index 00000000000..b0b32f5fbeb --- /dev/null +++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts @@ -0,0 +1,193 @@ +/* + * Device Tree file for NETGEAR ReadyNAS 104 + * + * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +/dts-v1/; + +#include "armada-370.dtsi" + +/ { + model = "NETGEAR ReadyNAS 104"; + compatible = "netgear,readynas-104", "marvell,armada370", "marvell,armada-370-xp"; + + chosen { + bootargs = "console=ttyS0,115200 earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; /* 512 MB */ + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000 + MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>; + + pcie-controller { + status = "okay"; + + /* Connected to FL1009 USB 3.0 controller */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + + /* Connected to Marvell 88SE9215 SATA controller */ + pcie@2,0 { + /* Port 1, Lane 0 */ + status = "okay"; + }; + }; + + internal-regs { + serial@12000 { + clock-frequency = <200000000>; + status = "okay"; + }; + + pinctrl { + poweroff: poweroff { + marvell,pins = "mpp60"; + marvell,function = "gpio"; + }; + + backup_key_pin: backup-key-pin { + marvell,pins = "mpp52"; + marvell,function = "gpio"; + }; + + power_key_pin: power-key-pin { + marvell,pins = "mpp62"; + marvell,function = "gpio"; + }; + + backup_led_pin: backup-led-pin { + marvell,pins = "mpp63"; + marvell,function = "gpo"; + }; + + power_led_pin: power-led-pin { + marvell,pins = "mpp64"; + marvell,function = "gpio"; + }; + + reset_key_pin: reset-key-pin { + marvell,pins = "mpp65"; + marvell,function = "gpio"; + }; + }; + + mdio { + phy0: ethernet-phy@0 { + reg = <0>; + }; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + + ethernet@70000 { + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; + }; + + ethernet@74000 { + status = "okay"; + phy = <&phy1>; + phy-mode = "rgmii-id"; + }; + + usb@50000 { + status = "okay"; + }; + + i2c@11000 { + compatible = "marvell,mv64xxx-i2c"; + clock-frequency = <100000>; + status = "okay"; + + g762: g762@3e { + compatible = "gmt,g762"; + reg = <0x3e>; + clocks = <&g762_clk>; /* input clock */ + fan_gear_mode = <0>; + fan_startv = <1>; + pwm_polarity = <0>; + }; + }; + }; + }; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + g762_clk: fixedclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <8192>; + }; + }; + + gpio_leds { + compatible = "gpio-leds"; + pinctrl-0 = <&backup_led_pin &power_led_pin>; + pinctrl-names = "default"; + + blue_backup_led { + label = "rn104:blue:backup"; + gpios = <&gpio1 31 0>; /* GPIO 63 Active High */ + default-state = "off"; + }; + + blue_power_led { + label = "rn104:blue:pwr"; + gpios = <&gpio2 0 1>; /* GPIO 64 Active Low */ + linux,default-trigger = "keep"; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&backup_key_pin + &power_key_pin + &reset_key_pin>; + pinctrl-names = "default"; + + button@1 { + label = "Backup Button"; + linux,code = <133>; /* KEY_COPY */ + gpios = <&gpio1 20 1>; + }; + + button@2 { + label = "Power Button"; + linux,code = <116>; /* KEY_POWER */ + gpios = <&gpio1 30 0>; + }; + + button@3 { + label = "Reset Button"; + linux,code = <0x198>; /* KEY_RESTART */ + gpios = <&gpio2 1 1>; + }; + }; + + gpio_poweroff { + compatible = "gpio-poweroff"; + pinctrl-0 = <&poweroff>; + pinctrl-names = "default"; + gpios = <&gpio1 28 1>; + }; +}; diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index 1de2dae0fda..00d6a798c70 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -113,6 +113,7 @@ #interrupt-cells = <1>; #size-cells = <1>; interrupt-controller; + msi-controller; }; coherency-fabric@20200 { @@ -137,6 +138,14 @@ status = "disabled"; }; + coredivclk: corediv-clock@18740 { + compatible = "marvell,armada-370-corediv-clock"; + reg = <0x18740 0xc>; + #clock-cells = <1>; + clocks = <&mainpll>; + clock-output-names = "nand"; + }; + timer@20300 { reg = <0x20300 0x30>, <0x21040 0x30>; interrupts = <37>, <38>, <39>, <40>, <5>, <6>; @@ -176,7 +185,6 @@ i2c0: i2c@11000 { compatible = "marvell,mv64xxx-i2c"; - reg = <0x11000 0x20>; #address-cells = <1>; #size-cells = <0>; interrupts = <31>; @@ -187,7 +195,6 @@ i2c1: i2c@11100 { compatible = "marvell,mv64xxx-i2c"; - reg = <0x11100 0x20>; #address-cells = <1>; #size-cells = <0>; interrupts = <32>; @@ -252,4 +259,13 @@ }; }; + + clocks { + /* 2 GHz fixed main PLL */ + mainpll: mainpll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <2000000000>; + }; + }; }; diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index e134d7a90c9..7a4b82e71aa 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -44,6 +44,7 @@ #address-cells = <3>; #size-cells = <2>; + msi-parent = <&mpic>; bus-range = <0x00 0xff>; ranges = @@ -218,6 +219,14 @@ }; }; + i2c0: i2c@11000 { + reg = <0x11000 0x20>; + }; + + i2c1: i2c@11100 { + reg = <0x11100 0x20>; + }; + usb@50000 { clocks = <&coreclk 0>; }; diff --git a/arch/arm/boot/dts/armada-xp-matrix.dts b/arch/arm/boot/dts/armada-xp-matrix.dts new file mode 100644 index 00000000000..e47c49ecd55 --- /dev/null +++ b/arch/arm/boot/dts/armada-xp-matrix.dts @@ -0,0 +1,75 @@ +/* + * Device Tree file for Marvell Armada XP Matrix board + * + * Copyright (C) 2013 Marvell + * + * Lior Amsalem <alior@marvell.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; +#include "armada-xp-mv78460.dtsi" + +/ { + model = "Marvell Armada XP Matrix Board"; + compatible = "marvell,axp-matrix", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp"; + + chosen { + bootargs = "console=ttyS0,115200 earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0 0x00000000 0 0x80000000>; /* 2 GB */ + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000 + MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>; + + internal-regs { + serial@12000 { + clock-frequency = <250000000>; + status = "okay"; + }; + serial@12100 { + clock-frequency = <250000000>; + status = "okay"; + }; + serial@12200 { + clock-frequency = <250000000>; + status = "okay"; + }; + serial@12300 { + clock-frequency = <250000000>; + status = "okay"; + }; + + sata@a0000 { + nr-ports = <2>; + status = "okay"; + }; + + ethernet@30000 { + status = "okay"; + phy-mode = "sgmii"; + }; + + pcie-controller { + status = "okay"; + + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + }; + + usb@50000 { + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi index 0358a33cba4..3f5e6121c73 100644 --- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi @@ -57,6 +57,7 @@ #address-cells = <3>; #size-cells = <2>; + msi-parent = <&mpic>; bus-range = <0x00 0xff>; ranges = diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi index 0e82c506224..3e9fd1353f8 100644 --- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -58,6 +58,7 @@ #address-cells = <3>; #size-cells = <2>; + msi-parent = <&mpic>; bus-range = <0x00 0xff>; ranges = diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi index e82c1b80af1..31ba6d8fbad 100644 --- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi @@ -74,6 +74,7 @@ #address-cells = <3>; #size-cells = <2>; + msi-parent = <&mpic>; bus-range = <0x00 0xff>; ranges = diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index 3058522f5aa..281c6447e87 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -147,6 +147,16 @@ }; }; + i2c0: i2c@11000 { + compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c"; + reg = <0x11000 0x100>; + }; + + i2c1: i2c@11100 { + compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c"; + reg = <0x11100 0x100>; + }; + usb@50000 { clocks = <&gateclk 18>; }; diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi index 137354689ad..cb2c010e08e 100644 --- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi +++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi @@ -96,7 +96,6 @@ }; spi0: spi@fffc8000 { - status = "okay"; cs-gpios = <0>, <&pioC 11 0>, <0>, <0>; mtd_dataflash@0 { compatible = "atmel,at45", "atmel,dataflash"; diff --git a/arch/arm/boot/dts/at91sam9g25.dtsi b/arch/arm/boot/dts/at91sam9g25.dtsi index b4ec6fe53fc..17b87999091 100644 --- a/arch/arm/boot/dts/at91sam9g25.dtsi +++ b/arch/arm/boot/dts/at91sam9g25.dtsi @@ -7,6 +7,8 @@ */ #include "at91sam9x5.dtsi" +#include "at91sam9x5_usart3.dtsi" +#include "at91sam9x5_macb0.dtsi" / { model = "Atmel AT91SAM9G25 SoC"; diff --git a/arch/arm/boot/dts/at91sam9g35.dtsi b/arch/arm/boot/dts/at91sam9g35.dtsi index bebf9f55614..e35c2fcf829 100644 --- a/arch/arm/boot/dts/at91sam9g35.dtsi +++ b/arch/arm/boot/dts/at91sam9g35.dtsi @@ -7,6 +7,7 @@ */ #include "at91sam9x5.dtsi" +#include "at91sam9x5_macb0.dtsi" / { model = "Atmel AT91SAM9G35 SoC"; diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index 9fb7ffd32af..6224f9fe2f2 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -437,6 +437,9 @@ compatible = "atmel,at91sam9g45-ssc"; reg = <0xf0010000 0x4000>; interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>; + dmas = <&dma 0 AT91_DMA_CFG_PER_ID(21)>, + <&dma 0 AT91_DMA_CFG_PER_ID(22)>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; status = "disabled"; diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index 27a9352b9d7..e9487f6f016 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -38,9 +38,18 @@ status = "okay"; }; + ssc0: ssc@f0010000 { + status = "okay"; + }; + i2c0: i2c@f8010000 { status = "okay"; + wm8904: codec@1a { + compatible = "wm8904"; + reg = <0x1a>; + }; + qt1070: keyboard@1b { compatible = "qt1070"; reg = <0x1b>; @@ -82,6 +91,13 @@ <AT91_PIOA 2 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; }; }; + + sound { + pinctrl_pck0_as_audio_mck: pck0_as_audio_mck { + atmel,pins = + <AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + }; }; spi0: spi@f0000000 { @@ -142,4 +158,22 @@ gpio-key,wakeup; }; }; + + sound { + compatible = "atmel,asoc-wm8904"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pck0_as_audio_mck>; + + atmel,model = "wm8904 @ AT91SAM9N12"; + atmel,audio-routing = + "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "IN2L", "Line In Jack", + "IN2R", "Line In Jack", + "Mic", "MICBIAS", + "IN1L", "Mic"; + + atmel,ssc-controller = <&ssc0>; + atmel,audio-codec = <&wm8904>; + }; }; diff --git a/arch/arm/boot/dts/at91sam9x25.dtsi b/arch/arm/boot/dts/at91sam9x25.dtsi index 49e94aba938..c2554219f7a 100644 --- a/arch/arm/boot/dts/at91sam9x25.dtsi +++ b/arch/arm/boot/dts/at91sam9x25.dtsi @@ -7,6 +7,9 @@ */ #include "at91sam9x5.dtsi" +#include "at91sam9x5_usart3.dtsi" +#include "at91sam9x5_macb0.dtsi" +#include "at91sam9x5_macb1.dtsi" / { model = "Atmel AT91SAM9X25 SoC"; @@ -22,27 +25,6 @@ 0x80000000 0xfffd0000 0xb83fffff /* pioC */ 0x003fffff 0x003f8000 0x00000000 /* pioD */ >; - - macb1 { - pinctrl_macb1_rmii: macb1_rmii-0 { - atmel,pins = - <AT91_PIOC 16 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC16 periph B */ - AT91_PIOC 18 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC18 periph B */ - AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC19 periph B */ - AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC20 periph B */ - AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC21 periph B */ - AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC27 periph B */ - AT91_PIOC 28 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC28 periph B */ - AT91_PIOC 29 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC29 periph B */ - AT91_PIOC 30 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC30 periph B */ - AT91_PIOC 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC31 periph B */ - }; - }; - }; - - macb1: ethernet@f8030000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_macb1_rmii>; }; }; }; diff --git a/arch/arm/boot/dts/at91sam9x35.dtsi b/arch/arm/boot/dts/at91sam9x35.dtsi index 1a3d525a1f5..8eac66ce0ab 100644 --- a/arch/arm/boot/dts/at91sam9x35.dtsi +++ b/arch/arm/boot/dts/at91sam9x35.dtsi @@ -7,6 +7,7 @@ */ #include "at91sam9x5.dtsi" +#include "at91sam9x5_macb0.dtsi" / { model = "Atmel AT91SAM9X35 SoC"; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index e74dc15efa9..40267a116c3 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -206,29 +206,6 @@ }; }; - usart3 { - pinctrl_usart3: usart3-0 { - atmel,pins = - <AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PC22 periph B with pullup */ - AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC23 periph B */ - }; - - pinctrl_usart3_rts: usart3_rts-0 { - atmel,pins = - <AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC24 periph B */ - }; - - pinctrl_usart3_cts: usart3_cts-0 { - atmel,pins = - <AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC25 periph B */ - }; - - pinctrl_usart3_sck: usart3_sck-0 { - atmel,pins = - <AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC26 periph B */ - }; - }; - uart0 { pinctrl_uart0: uart0-0 { atmel,pins = @@ -277,34 +254,6 @@ }; }; - macb0 { - pinctrl_macb0_rmii: macb0_rmii-0 { - atmel,pins = - <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB0 periph A */ - AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A */ - AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB2 periph A */ - AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB3 periph A */ - AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB4 periph A */ - AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB5 periph A */ - AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A */ - AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB7 periph A */ - AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A */ - AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB10 periph A */ - }; - - pinctrl_macb0_rmii_mii: macb0_rmii_mii-0 { - atmel,pins = - <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB8 periph A */ - AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB11 periph A */ - AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB12 periph A */ - AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A */ - AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB14 periph A */ - AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB15 periph A */ - AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB16 periph A */ - AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB17 periph A */ - }; - }; - mmc0 { pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 { atmel,pins = @@ -610,22 +559,6 @@ status = "disabled"; }; - macb0: ethernet@f802c000 { - compatible = "cdns,at32ap7000-macb", "cdns,macb"; - reg = <0xf802c000 0x100>; - interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_macb0_rmii>; - status = "disabled"; - }; - - macb1: ethernet@f8030000 { - compatible = "cdns,at32ap7000-macb", "cdns,macb"; - reg = <0xf8030000 0x100>; - interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>; - status = "disabled"; - }; - i2c0: i2c@f8010000 { compatible = "atmel,at91sam9x5-i2c"; reg = <0xf8010000 0x100>; diff --git a/arch/arm/boot/dts/at91sam9x5_macb0.dtsi b/arch/arm/boot/dts/at91sam9x5_macb0.dtsi new file mode 100644 index 00000000000..55731ffba76 --- /dev/null +++ b/arch/arm/boot/dts/at91sam9x5_macb0.dtsi @@ -0,0 +1,56 @@ +/* + * at91sam9x5_macb0.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 1 + * Ethernet interface. + * + * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> + * + * Licensed under GPLv2. + */ + +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + ahb { + apb { + pinctrl@fffff400 { + macb0 { + pinctrl_macb0_rmii: macb0_rmii-0 { + atmel,pins = + <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB0 periph A */ + AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A */ + AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB2 periph A */ + AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB3 periph A */ + AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB4 periph A */ + AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB5 periph A */ + AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A */ + AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB7 periph A */ + AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A */ + AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB10 periph A */ + }; + + pinctrl_macb0_rmii_mii: macb0_rmii_mii-0 { + atmel,pins = + <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB8 periph A */ + AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB11 periph A */ + AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB12 periph A */ + AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A */ + AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB14 periph A */ + AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB15 periph A */ + AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB16 periph A */ + AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB17 periph A */ + }; + }; + }; + + macb0: ethernet@f802c000 { + compatible = "cdns,at32ap7000-macb", "cdns,macb"; + reg = <0xf802c000 0x100>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb0_rmii>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9x5_macb1.dtsi b/arch/arm/boot/dts/at91sam9x5_macb1.dtsi new file mode 100644 index 00000000000..77425a627a9 --- /dev/null +++ b/arch/arm/boot/dts/at91sam9x5_macb1.dtsi @@ -0,0 +1,44 @@ +/* + * at91sam9x5_macb1.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 2 + * Ethernet interfaces. + * + * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> + * + * Licensed under GPLv2. + */ + +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + ahb { + apb { + pinctrl@fffff400 { + macb1 { + pinctrl_macb1_rmii: macb1_rmii-0 { + atmel,pins = + <AT91_PIOC 16 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC16 periph B */ + AT91_PIOC 18 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC18 periph B */ + AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC19 periph B */ + AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC20 periph B */ + AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC21 periph B */ + AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC27 periph B */ + AT91_PIOC 28 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC28 periph B */ + AT91_PIOC 29 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC29 periph B */ + AT91_PIOC 30 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC30 periph B */ + AT91_PIOC 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC31 periph B */ + }; + }; + }; + + macb1: ethernet@f8030000 { + compatible = "cdns,at32ap7000-macb", "cdns,macb"; + reg = <0xf8030000 0x100>; + interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb1_rmii>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi new file mode 100644 index 00000000000..2347e9563ce --- /dev/null +++ b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi @@ -0,0 +1,51 @@ +/* + * at91sam9x5_usart3.dtsi - Device Tree Include file for AT91SAM9x5 SoC with + * 4 USART. + * + * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> + * + * Licensed under GPLv2. + */ + +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + ahb { + apb { + pinctrl@fffff400 { + usart3 { + pinctrl_usart3: usart3-0 { + atmel,pins = + <AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PC22 periph B with pullup */ + AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC23 periph B */ + }; + + pinctrl_usart3_rts: usart3_rts-0 { + atmel,pins = + <AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC24 periph B */ + }; + + pinctrl_usart3_cts: usart3_cts-0 { + atmel,pins = + <AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC25 periph B */ + }; + + pinctrl_usart3_sck: usart3_sck-0 { + atmel,pins = + <AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC26 periph B */ + }; + }; + }; + + usart3: serial@f8028000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf8028000 0x200>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart3>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/atlas6.dtsi b/arch/arm/boot/dts/atlas6.dtsi index 6db4f81d479..a49032c6e19 100644 --- a/arch/arm/boot/dts/atlas6.dtsi +++ b/arch/arm/boot/dts/atlas6.dtsi @@ -65,6 +65,11 @@ compatible = "sirf,prima2-rsc"; reg = <0x88020000 0x1000>; }; + + cphifbg@88030000 { + compatible = "sirf,prima2-cphifbg"; + reg = <0x88030000 0x1000>; + }; }; mem-iobg { @@ -75,10 +80,17 @@ memory-controller@90000000 { compatible = "sirf,prima2-memc"; - reg = <0x90000000 0x10000>; + reg = <0x90000000 0x2000>; interrupts = <27>; clocks = <&clks 5>; }; + + memc-monitor { + compatible = "sirf,prima2-memcmon"; + reg = <0x90002000 0x200>; + interrupts = <4>; + clocks = <&clks 32>; + }; }; disp-iobg { @@ -120,6 +132,20 @@ }; }; + graphics2d-iobg { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xa0000000 0xa0000000 0x8000000>; + + ble@a0000000 { + compatible = "sirf,atlas6-ble"; + reg = <0xa0000000 0x2000>; + interrupts = <5>; + clocks = <&clks 33>; + }; + }; + dsp-iobg { compatible = "simple-bus"; #address-cells = <1>; @@ -271,6 +297,11 @@ compatible = "sirf,prima2-spi"; reg = <0xb0170000 0x10000>; interrupts = <16>; + sirf,spi-num-chipselects = <1>; + sirf,spi-dma-rx-channel = <12>; + sirf,spi-dma-tx-channel = <13>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&clks 20>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/bcm11351-brt.dts b/arch/arm/boot/dts/bcm11351-brt.dts index 9d36eb4e3c4..23cd16d736b 100644 --- a/arch/arm/boot/dts/bcm11351-brt.dts +++ b/arch/arm/boot/dts/bcm11351-brt.dts @@ -40,6 +40,7 @@ sdio4: sdio@3f1b0000 { max-frequency = <48000000>; + cd-gpios = <&gpio 14 0>; status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi index 05a5aabe3b2..b0c0610d139 100644 --- a/arch/arm/boot/dts/bcm11351.dtsi +++ b/arch/arm/boot/dts/bcm11351.dtsi @@ -49,6 +49,36 @@ reg-io-width = <4>; }; + uart@3e001000 { + compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart"; + status = "disabled"; + reg = <0x3e001000 0x1000>; + clock-frequency = <13000000>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + }; + + uart@3e002000 { + compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart"; + status = "disabled"; + reg = <0x3e002000 0x1000>; + clock-frequency = <13000000>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + }; + + uart@3e003000 { + compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart"; + status = "disabled"; + reg = <0x3e003000 0x1000>; + clock-frequency = <13000000>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + }; + L2: l2-cache { compatible = "brcm,bcm11351-a2-pl310-cache"; reg = <0x3ff20000 0x1000>; @@ -68,31 +98,47 @@ clock-frequency = <32768>; }; + gpio: gpio@35003000 { + compatible = "brcm,bcm11351-gpio", "brcm,kona-gpio"; + reg = <0x35003000 0x800>; + interrupts = + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + #interrupt-cells = <2>; + gpio-controller; + interrupt-controller; + }; + sdio1: sdio@3f180000 { compatible = "brcm,kona-sdhci"; reg = <0x3f180000 0x10000>; - interrupts = <0x0 77 0x4>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; sdio2: sdio@3f190000 { compatible = "brcm,kona-sdhci"; reg = <0x3f190000 0x10000>; - interrupts = <0x0 76 0x4>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; sdio3: sdio@3f1a0000 { compatible = "brcm,kona-sdhci"; reg = <0x3f1a0000 0x10000>; - interrupts = <0x0 74 0x4>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; sdio4: sdio@3f1b0000 { compatible = "brcm,kona-sdhci"; reg = <0x3f1b0000 0x10000>; - interrupts = <0x0 73 0x4>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/bcm28155-ap.dts b/arch/arm/boot/dts/bcm28155-ap.dts index 96ae67a2f0d..08e47c28522 100644 --- a/arch/arm/boot/dts/bcm28155-ap.dts +++ b/arch/arm/boot/dts/bcm28155-ap.dts @@ -40,6 +40,7 @@ sdio4: sdio@3f1b0000 { max-frequency = <48000000>; + cd-gpios = <&gpio 14 0>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/dove-cm-a510.dts b/arch/arm/boot/dts/dove-cm-a510.dts index 61a8062e56d..50c0d690449 100644 --- a/arch/arm/boot/dts/dove-cm-a510.dts +++ b/arch/arm/boot/dts/dove-cm-a510.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "dove.dtsi" +#include "dove.dtsi" / { model = "Compulab CM-A510"; diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts index 022646ef4b3..8349a248ece 100644 --- a/arch/arm/boot/dts/dove-cubox.dts +++ b/arch/arm/boot/dts/dove-cubox.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "dove.dtsi" +#include "dove.dtsi" / { model = "SolidRun CuBox"; @@ -99,18 +99,12 @@ silabs,pll-master; }; - clkout1 { - reg = <1>; - silabs,drive-strength = <8>; - silabs,multisynth-source = <1>; - silabs,clock-source = <0>; - silabs,pll-master; - }; - clkout2 { reg = <2>; + silabs,drive-strength = <8>; silabs,multisynth-source = <1>; silabs,clock-source = <0>; + silabs,pll-master; }; }; }; @@ -132,3 +126,11 @@ reg = <0>; }; }; + +&audio1 { + status = "okay"; + clocks = <&gate_clk 13>, <&si5351 2>; + clock-names = "internal", "extclk"; + pinctrl-0 = <&pmx_audio1_i2s1_spdifo &pmx_audio1_extclk>; + pinctrl-names = "default"; +}; diff --git a/arch/arm/boot/dts/dove-d2plug.dts b/arch/arm/boot/dts/dove-d2plug.dts index e2222ce94f2..c11d3636c8e 100644 --- a/arch/arm/boot/dts/dove-d2plug.dts +++ b/arch/arm/boot/dts/dove-d2plug.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "dove.dtsi" +#include "dove.dtsi" / { model = "Globalscale D2Plug"; diff --git a/arch/arm/boot/dts/dove-d3plug.dts b/arch/arm/boot/dts/dove-d3plug.dts new file mode 100644 index 00000000000..f5f59bb5a53 --- /dev/null +++ b/arch/arm/boot/dts/dove-d3plug.dts @@ -0,0 +1,103 @@ +/dts-v1/; + +#include "dove.dtsi" + +/ { + model = "Globalscale D3Plug"; + compatible = "globalscale,d3plug", "marvell,dove"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x40000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/mmcblk0p2 rw rootwait"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pmx_gpio_0 &pmx_gpio_1 &pmx_gpio_2>; + pinctrl-names = "default"; + + wlan-act { + label = "wlan-act"; + gpios = <&gpio0 0 1>; + }; + + wlan-ap { + label = "wlan-ap"; + gpios = <&gpio0 1 1>; + }; + + status { + label = "status"; + gpios = <&gpio0 2 1>; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + usb_power: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "USB Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 8 0>; + pinctrl-0 = <&pmx_gpio_8>; + pinctrl-names = "default"; + }; + }; +}; + +&uart0 { status = "okay"; }; +&sata0 { status = "okay"; }; +&i2c0 { status = "okay"; }; + +/* Samsung M8G2F eMMC */ +&sdio0 { + status = "okay"; + non-removable; + bus-width = <4>; +}; + +/* Marvell SD8787 WLAN/BT */ +&sdio1 { + status = "okay"; + non-removable; +}; + +&spi0 { + status = "okay"; + + /* spi0.0: 2M Flash Macronix MX25L1605D */ + spi-flash@0 { + compatible = "st,m25l1605d"; + spi-max-frequency = <86000000>; + reg = <0>; + }; +}; + +&pcie { + status = "okay"; + /* Fresco Logic USB3.0 xHCI controller */ + pcie-port@0 { + status = "okay"; + reset-gpios = <&gpio0 26 1>; + reset-delay-us = <20000>; + pinctrl-0 = <&pmx_camera_gpio>; + pinctrl-names = "default"; + }; + /* Mini-PCIe slot */ + pcie-port@1 { + status = "okay"; + reset-gpios = <&gpio0 25 1>; + }; +}; diff --git a/arch/arm/boot/dts/dove-dove-db.dts b/arch/arm/boot/dts/dove-dove-db.dts index e5a920beab4..bb725dca3a1 100644 --- a/arch/arm/boot/dts/dove-dove-db.dts +++ b/arch/arm/boot/dts/dove-dove-db.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "dove.dtsi" +#include "dove.dtsi" / { model = "Marvell DB-MV88AP510-BP Development Board"; diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index cc279166646..113a8bc7bee 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -1,8 +1,11 @@ /include/ "skeleton.dtsi" +#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16)) + / { compatible = "marvell,dove"; model = "Marvell Armada 88AP510 SoC"; + interrupt-parent = <&intc>; aliases { gpio0 = &gpio0; @@ -27,482 +30,576 @@ marvell,tauros2-cache-features = <0>; }; - soc@f1000000 { - compatible = "simple-bus"; - #address-cells = <1>; + mbus { + compatible = "marvell,dove-mbus", "marvell,mbus", "simple-bus"; + #address-cells = <2>; #size-cells = <1>; - interrupt-parent = <&intc>; - - ranges = <0xc8000000 0xc8000000 0x0100000 /* CESA SRAM 1M */ - 0xe0000000 0xe0000000 0x8000000 /* PCIe0 Mem 128M */ - 0xe8000000 0xe8000000 0x8000000 /* PCIe1 Mem 128M */ - 0xf0000000 0xf0000000 0x0100000 /* ScratchPad 1M */ - 0x00000000 0xf1000000 0x1000000 /* SB/NB regs 16M */ - 0xf2000000 0xf2000000 0x0100000 /* PCIe0 I/O 1M */ - 0xf2100000 0xf2100000 0x0100000 /* PCIe0 I/O 1M */ - 0xf8000000 0xf8000000 0x8000000>; /* BootROM 128M */ - - timer: timer@20300 { - compatible = "marvell,orion-timer"; - reg = <0x20300 0x20>; - interrupt-parent = <&bridge_intc>; - interrupts = <1>, <2>; - clocks = <&core_clk 0>; - }; - - intc: main-interrupt-ctrl@20200 { - compatible = "marvell,orion-intc"; - interrupt-controller; - #interrupt-cells = <1>; - reg = <0x20200 0x10>, <0x20210 0x10>; - }; - - bridge_intc: bridge-interrupt-ctrl@20110 { - compatible = "marvell,orion-bridge-intc"; - interrupt-controller; - #interrupt-cells = <1>; - reg = <0x20110 0x8>; - interrupts = <0>; - marvell,#interrupts = <5>; - }; - - core_clk: core-clocks@d0214 { - compatible = "marvell,dove-core-clock"; - reg = <0xd0214 0x4>; - #clock-cells = <1>; - }; - - gate_clk: clock-gating-ctrl@d0038 { - compatible = "marvell,dove-gating-clock"; - reg = <0xd0038 0x4>; - clocks = <&core_clk 0>; - #clock-cells = <1>; - }; - - thermal: thermal-diode@d001c { - compatible = "marvell,dove-thermal"; - reg = <0xd001c 0x0c>, <0xd005c 0x08>; - }; - - uart0: serial@12000 { - compatible = "ns16550a"; - reg = <0x12000 0x100>; - reg-shift = <2>; - interrupts = <7>; - clocks = <&core_clk 0>; - status = "disabled"; - }; - - uart1: serial@12100 { - compatible = "ns16550a"; - reg = <0x12100 0x100>; - reg-shift = <2>; - interrupts = <8>; - clocks = <&core_clk 0>; - pinctrl-0 = <&pmx_uart1>; - pinctrl-names = "default"; - status = "disabled"; - }; - - uart2: serial@12200 { - compatible = "ns16550a"; - reg = <0x12000 0x100>; - reg-shift = <2>; - interrupts = <9>; - clocks = <&core_clk 0>; + controller = <&mbusc>; + pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256M MEM space */ + pcie-io-aperture = <0xf2000000 0x00200000>; /* 2M I/O space */ + + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x0100000 /* MBUS regs 1M */ + MBUS_ID(0xf0, 0x02) 0 0xf1800000 0x1000000 /* AXI regs 16M */ + MBUS_ID(0x01, 0xfd) 0 0xf8000000 0x8000000 /* BootROM 128M */ + MBUS_ID(0x03, 0x01) 0 0xc8000000 0x0100000 /* CESA SRAM 1M */ + MBUS_ID(0x0d, 0x00) 0 0xf0000000 0x0100000>; /* PMU SRAM 1M */ + + pcie: pcie-controller { + compatible = "marvell,dove-pcie"; status = "disabled"; - }; - - uart3: serial@12300 { - compatible = "ns16550a"; - reg = <0x12100 0x100>; - reg-shift = <2>; - interrupts = <10>; - clocks = <&core_clk 0>; - status = "disabled"; - }; - - gpio0: gpio-ctrl@d0400 { - compatible = "marvell,orion-gpio"; - #gpio-cells = <2>; - gpio-controller; - reg = <0xd0400 0x20>; - ngpios = <32>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <12>, <13>, <14>, <60>; - }; - - gpio1: gpio-ctrl@d0420 { - compatible = "marvell,orion-gpio"; - #gpio-cells = <2>; - gpio-controller; - reg = <0xd0420 0x20>; - ngpios = <32>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <61>; - }; - - gpio2: gpio-ctrl@e8400 { - compatible = "marvell,orion-gpio"; - #gpio-cells = <2>; - gpio-controller; - reg = <0xe8400 0x0c>; - ngpios = <8>; - }; - - pinctrl: pin-ctrl@d0200 { - compatible = "marvell,dove-pinctrl"; - reg = <0xd0200 0x10>; - clocks = <&gate_clk 22>; - - pmx_gpio_0: pmx-gpio-0 { - marvell,pins = "mpp0"; - marvell,function = "gpio"; - }; - - pmx_gpio_1: pmx-gpio-1 { - marvell,pins = "mpp1"; - marvell,function = "gpio"; - }; - - pmx_gpio_2: pmx-gpio-2 { - marvell,pins = "mpp2"; - marvell,function = "gpio"; - }; - - pmx_gpio_3: pmx-gpio-3 { - marvell,pins = "mpp3"; - marvell,function = "gpio"; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + + msi-parent = <&intc>; + bus-range = <0x00 0xff>; + + ranges = <0x82000000 0x0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x2000 + 0x82000000 0x0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x2000 + 0x82000000 0x1 0x0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 Mem */ + 0x81000000 0x1 0x0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 I/O */ + 0x82000000 0x2 0x0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 Mem */ + 0x81000000 0x2 0x0 MBUS_ID(0x08, 0xe0) 0 1 0>; /* Port 1.0 I/O */ + + pcie-port@0 { + device_type = "pci"; + status = "disabled"; + assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; + reg = <0x0800 0 0 0 0>; + clocks = <&gate_clk 4>; + marvell,pcie-port = <0>; + + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 + 0x81000000 0 0 0x81000000 0x1 0 1 0>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &intc 16>; + }; + + pcie-port@1 { + device_type = "pci"; + status = "disabled"; + assigned-addresses = <0x82002800 0 0x80000 0 0x2000>; + reg = <0x1000 0 0 0 0>; + clocks = <&gate_clk 5>; + marvell,pcie-port = <1>; + + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 + 0x81000000 0 0 0x81000000 0x2 0 1 0>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &intc 18>; }; - - pmx_gpio_4: pmx-gpio-4 { - marvell,pins = "mpp4"; - marvell,function = "gpio"; - }; - - pmx_gpio_5: pmx-gpio-5 { - marvell,pins = "mpp5"; - marvell,function = "gpio"; - }; - - pmx_gpio_6: pmx-gpio-6 { - marvell,pins = "mpp6"; - marvell,function = "gpio"; - }; - - pmx_gpio_7: pmx-gpio-7 { - marvell,pins = "mpp7"; - marvell,function = "gpio"; - }; - - pmx_gpio_8: pmx-gpio-8 { - marvell,pins = "mpp8"; - marvell,function = "gpio"; - }; - - pmx_gpio_9: pmx-gpio-9 { - marvell,pins = "mpp9"; - marvell,function = "gpio"; - }; - - pmx_gpio_10: pmx-gpio-10 { - marvell,pins = "mpp10"; - marvell,function = "gpio"; - }; - - pmx_gpio_11: pmx-gpio-11 { - marvell,pins = "mpp11"; - marvell,function = "gpio"; - }; - - pmx_gpio_12: pmx-gpio-12 { - marvell,pins = "mpp12"; - marvell,function = "gpio"; - }; - - pmx_gpio_13: pmx-gpio-13 { - marvell,pins = "mpp13"; - marvell,function = "gpio"; - }; - - pmx_gpio_14: pmx-gpio-14 { - marvell,pins = "mpp14"; - marvell,function = "gpio"; - }; - - pmx_gpio_15: pmx-gpio-15 { - marvell,pins = "mpp15"; - marvell,function = "gpio"; - }; - - pmx_gpio_16: pmx-gpio-16 { - marvell,pins = "mpp16"; - marvell,function = "gpio"; - }; - - pmx_gpio_17: pmx-gpio-17 { - marvell,pins = "mpp17"; - marvell,function = "gpio"; - }; - - pmx_gpio_18: pmx-gpio-18 { - marvell,pins = "mpp18"; - marvell,function = "gpio"; - }; - - pmx_gpio_19: pmx-gpio-19 { - marvell,pins = "mpp19"; - marvell,function = "gpio"; - }; - - pmx_gpio_20: pmx-gpio-20 { - marvell,pins = "mpp20"; - marvell,function = "gpio"; - }; - - pmx_gpio_21: pmx-gpio-21 { - marvell,pins = "mpp21"; - marvell,function = "gpio"; - }; - - pmx_camera: pmx-camera { - marvell,pins = "mpp_camera"; - marvell,function = "camera"; - }; - - pmx_camera_gpio: pmx-camera-gpio { - marvell,pins = "mpp_camera"; - marvell,function = "gpio"; - }; - - pmx_sdio0: pmx-sdio0 { - marvell,pins = "mpp_sdio0"; - marvell,function = "sdio0"; - }; - - pmx_sdio0_gpio: pmx-sdio0-gpio { - marvell,pins = "mpp_sdio0"; - marvell,function = "gpio"; - }; - - pmx_sdio1: pmx-sdio1 { - marvell,pins = "mpp_sdio1"; - marvell,function = "sdio1"; - }; - - pmx_sdio1_gpio: pmx-sdio1-gpio { - marvell,pins = "mpp_sdio1"; - marvell,function = "gpio"; - }; - - pmx_audio1_gpio: pmx-audio1-gpio { - marvell,pins = "mpp_audio1"; - marvell,function = "gpio"; - }; - - pmx_spi0: pmx-spi0 { - marvell,pins = "mpp_spi0"; - marvell,function = "spi0"; - }; - - pmx_spi0_gpio: pmx-spi0-gpio { - marvell,pins = "mpp_spi0"; - marvell,function = "gpio"; - }; - - pmx_uart1: pmx-uart1 { - marvell,pins = "mpp_uart1"; - marvell,function = "uart1"; - }; - - pmx_uart1_gpio: pmx-uart1-gpio { - marvell,pins = "mpp_uart1"; - marvell,function = "gpio"; - }; - - pmx_nand: pmx-nand { - marvell,pins = "mpp_nand"; - marvell,function = "nand"; - }; - - pmx_nand_gpo: pmx-nand-gpo { - marvell,pins = "mpp_nand"; - marvell,function = "gpo"; - }; - }; - - spi0: spi-ctrl@10600 { - compatible = "marvell,orion-spi"; - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - interrupts = <6>; - reg = <0x10600 0x28>; - clocks = <&core_clk 0>; - pinctrl-0 = <&pmx_spi0>; - pinctrl-names = "default"; - status = "disabled"; - }; - - spi1: spi-ctrl@14600 { - compatible = "marvell,orion-spi"; - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - interrupts = <5>; - reg = <0x14600 0x28>; - clocks = <&core_clk 0>; - status = "disabled"; - }; - - i2c0: i2c-ctrl@11000 { - compatible = "marvell,mv64xxx-i2c"; - reg = <0x11000 0x20>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <11>; - clock-frequency = <400000>; - timeout-ms = <1000>; - clocks = <&core_clk 0>; - status = "disabled"; }; - ehci0: usb-host@50000 { - compatible = "marvell,orion-ehci"; - reg = <0x50000 0x1000>; - interrupts = <24>; - clocks = <&gate_clk 0>; - status = "okay"; - }; - - ehci1: usb-host@51000 { - compatible = "marvell,orion-ehci"; - reg = <0x51000 0x1000>; - interrupts = <25>; - clocks = <&gate_clk 1>; - status = "okay"; - }; - - sdio0: sdio-host@92000 { - compatible = "marvell,dove-sdhci"; - reg = <0x92000 0x100>; - interrupts = <35>, <37>; - clocks = <&gate_clk 8>; - pinctrl-0 = <&pmx_sdio0>; - pinctrl-names = "default"; - status = "disabled"; - }; - - sdio1: sdio-host@90000 { - compatible = "marvell,dove-sdhci"; - reg = <0x90000 0x100>; - interrupts = <36>, <38>; - clocks = <&gate_clk 9>; - pinctrl-0 = <&pmx_sdio1>; - pinctrl-names = "default"; - status = "disabled"; - }; - - sata0: sata-host@a0000 { - compatible = "marvell,orion-sata"; - reg = <0xa0000 0x2400>; - interrupts = <62>; - clocks = <&gate_clk 3>; - nr-ports = <1>; - status = "disabled"; - }; - - rtc: real-time-clock@d8500 { - compatible = "marvell,orion-rtc"; - reg = <0xd8500 0x20>; - }; - - crypto: crypto-engine@30000 { - compatible = "marvell,orion-crypto"; - reg = <0x30000 0x10000>, - <0xc8000000 0x800>; - reg-names = "regs", "sram"; - interrupts = <31>; - clocks = <&gate_clk 15>; - status = "okay"; - }; - - xor0: dma-engine@60800 { - compatible = "marvell,orion-xor"; - reg = <0x60800 0x100 - 0x60a00 0x100>; - clocks = <&gate_clk 23>; - status = "okay"; - - channel0 { - interrupts = <39>; - dmacap,memcpy; - dmacap,xor; - }; - - channel1 { - interrupts = <40>; - dmacap,memset; - dmacap,memcpy; - dmacap,xor; - }; - }; - - xor1: dma-engine@60900 { - compatible = "marvell,orion-xor"; - reg = <0x60900 0x100 - 0x60b00 0x100>; - clocks = <&gate_clk 24>; - status = "okay"; - - channel0 { - interrupts = <42>; - dmacap,memcpy; - dmacap,xor; - }; - - channel1 { - interrupts = <43>; - dmacap,memset; - dmacap,memcpy; - dmacap,xor; - }; - }; - - mdio: mdio-bus@72004 { - compatible = "marvell,orion-mdio"; + internal-regs { + compatible = "simple-bus"; #address-cells = <1>; - #size-cells = <0>; - reg = <0x72004 0x84>; - interrupts = <30>; - clocks = <&gate_clk 2>; - status = "disabled"; - - ethphy: ethernet-phy { - device-type = "ethernet-phy"; - /* set phy address in board file */ - }; - }; - - eth: ethernet-controller@72000 { - compatible = "marvell,orion-eth"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x72000 0x4000>; - clocks = <&gate_clk 2>; - marvell,tx-checksum-limit = <1600>; - status = "disabled"; - - ethernet-port@0 { - device_type = "network"; - compatible = "marvell,orion-eth-port"; - reg = <0>; - interrupts = <29>; - /* overwrite MAC address in bootloader */ - local-mac-address = [00 00 00 00 00 00]; - phy-handle = <ðphy>; + #size-cells = <1>; + ranges = <0x00000000 MBUS_ID(0xf0, 0x01) 0 0x0100000 /* MBUS regs 1M */ + 0x00800000 MBUS_ID(0xf0, 0x02) 0 0x1000000 /* AXI regs 16M */ + 0xffffe000 MBUS_ID(0x03, 0x01) 0 0x0000800 /* CESA SRAM 2k */ + 0xfffff000 MBUS_ID(0x0d, 0x00) 0 0x0000800>; /* PMU SRAM 2k */ + + mbusc: mbus-ctrl@20000 { + compatible = "marvell,mbus-controller"; + reg = <0x20000 0x80>, <0x800100 0x8>; + }; + + timer: timer@20300 { + compatible = "marvell,orion-timer"; + reg = <0x20300 0x20>; + interrupt-parent = <&bridge_intc>; + interrupts = <1>, <2>; + clocks = <&core_clk 0>; + }; + + intc: main-interrupt-ctrl@20200 { + compatible = "marvell,orion-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x20200 0x10>, <0x20210 0x10>; + }; + + bridge_intc: bridge-interrupt-ctrl@20110 { + compatible = "marvell,orion-bridge-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x20110 0x8>; + interrupts = <0>; + marvell,#interrupts = <5>; + }; + + core_clk: core-clocks@d0214 { + compatible = "marvell,dove-core-clock"; + reg = <0xd0214 0x4>; + #clock-cells = <1>; + }; + + gate_clk: clock-gating-ctrl@d0038 { + compatible = "marvell,dove-gating-clock"; + reg = <0xd0038 0x4>; + clocks = <&core_clk 0>; + #clock-cells = <1>; + }; + + thermal: thermal-diode@d001c { + compatible = "marvell,dove-thermal"; + reg = <0xd001c 0x0c>, <0xd005c 0x08>; + }; + + uart0: serial@12000 { + compatible = "ns16550a"; + reg = <0x12000 0x100>; + reg-shift = <2>; + interrupts = <7>; + clocks = <&core_clk 0>; + status = "disabled"; + }; + + uart1: serial@12100 { + compatible = "ns16550a"; + reg = <0x12100 0x100>; + reg-shift = <2>; + interrupts = <8>; + clocks = <&core_clk 0>; + pinctrl-0 = <&pmx_uart1>; + pinctrl-names = "default"; + status = "disabled"; + }; + + uart2: serial@12200 { + compatible = "ns16550a"; + reg = <0x12000 0x100>; + reg-shift = <2>; + interrupts = <9>; + clocks = <&core_clk 0>; + status = "disabled"; + }; + + uart3: serial@12300 { + compatible = "ns16550a"; + reg = <0x12100 0x100>; + reg-shift = <2>; + interrupts = <10>; + clocks = <&core_clk 0>; + status = "disabled"; + }; + + gpio0: gpio-ctrl@d0400 { + compatible = "marvell,orion-gpio"; + #gpio-cells = <2>; + gpio-controller; + reg = <0xd0400 0x20>; + ngpios = <32>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <12>, <13>, <14>, <60>; + }; + + gpio1: gpio-ctrl@d0420 { + compatible = "marvell,orion-gpio"; + #gpio-cells = <2>; + gpio-controller; + reg = <0xd0420 0x20>; + ngpios = <32>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <61>; + }; + + gpio2: gpio-ctrl@e8400 { + compatible = "marvell,orion-gpio"; + #gpio-cells = <2>; + gpio-controller; + reg = <0xe8400 0x0c>; + ngpios = <8>; + }; + + pinctrl: pin-ctrl@d0200 { + compatible = "marvell,dove-pinctrl"; + reg = <0xd0200 0x10>; + clocks = <&gate_clk 22>; + + pmx_gpio_0: pmx-gpio-0 { + marvell,pins = "mpp0"; + marvell,function = "gpio"; + }; + + pmx_gpio_1: pmx-gpio-1 { + marvell,pins = "mpp1"; + marvell,function = "gpio"; + }; + + pmx_gpio_2: pmx-gpio-2 { + marvell,pins = "mpp2"; + marvell,function = "gpio"; + }; + + pmx_gpio_3: pmx-gpio-3 { + marvell,pins = "mpp3"; + marvell,function = "gpio"; + }; + + pmx_gpio_4: pmx-gpio-4 { + marvell,pins = "mpp4"; + marvell,function = "gpio"; + }; + + pmx_gpio_5: pmx-gpio-5 { + marvell,pins = "mpp5"; + marvell,function = "gpio"; + }; + + pmx_gpio_6: pmx-gpio-6 { + marvell,pins = "mpp6"; + marvell,function = "gpio"; + }; + + pmx_gpio_7: pmx-gpio-7 { + marvell,pins = "mpp7"; + marvell,function = "gpio"; + }; + + pmx_gpio_8: pmx-gpio-8 { + marvell,pins = "mpp8"; + marvell,function = "gpio"; + }; + + pmx_gpio_9: pmx-gpio-9 { + marvell,pins = "mpp9"; + marvell,function = "gpio"; + }; + + pmx_gpio_10: pmx-gpio-10 { + marvell,pins = "mpp10"; + marvell,function = "gpio"; + }; + + pmx_gpio_11: pmx-gpio-11 { + marvell,pins = "mpp11"; + marvell,function = "gpio"; + }; + + pmx_gpio_12: pmx-gpio-12 { + marvell,pins = "mpp12"; + marvell,function = "gpio"; + }; + + pmx_gpio_13: pmx-gpio-13 { + marvell,pins = "mpp13"; + marvell,function = "gpio"; + }; + + pmx_audio1_extclk: pmx-audio1-extclk { + marvell,pins = "mpp13"; + marvell,function = "audio1"; + }; + + pmx_gpio_14: pmx-gpio-14 { + marvell,pins = "mpp14"; + marvell,function = "gpio"; + }; + + pmx_gpio_15: pmx-gpio-15 { + marvell,pins = "mpp15"; + marvell,function = "gpio"; + }; + + pmx_gpio_16: pmx-gpio-16 { + marvell,pins = "mpp16"; + marvell,function = "gpio"; + }; + + pmx_gpio_17: pmx-gpio-17 { + marvell,pins = "mpp17"; + marvell,function = "gpio"; + }; + + pmx_gpio_18: pmx-gpio-18 { + marvell,pins = "mpp18"; + marvell,function = "gpio"; + }; + + pmx_gpio_19: pmx-gpio-19 { + marvell,pins = "mpp19"; + marvell,function = "gpio"; + }; + + pmx_gpio_20: pmx-gpio-20 { + marvell,pins = "mpp20"; + marvell,function = "gpio"; + }; + + pmx_gpio_21: pmx-gpio-21 { + marvell,pins = "mpp21"; + marvell,function = "gpio"; + }; + + pmx_camera: pmx-camera { + marvell,pins = "mpp_camera"; + marvell,function = "camera"; + }; + + pmx_camera_gpio: pmx-camera-gpio { + marvell,pins = "mpp_camera"; + marvell,function = "gpio"; + }; + + pmx_sdio0: pmx-sdio0 { + marvell,pins = "mpp_sdio0"; + marvell,function = "sdio0"; + }; + + pmx_sdio0_gpio: pmx-sdio0-gpio { + marvell,pins = "mpp_sdio0"; + marvell,function = "gpio"; + }; + + pmx_sdio1: pmx-sdio1 { + marvell,pins = "mpp_sdio1"; + marvell,function = "sdio1"; + }; + + pmx_sdio1_gpio: pmx-sdio1-gpio { + marvell,pins = "mpp_sdio1"; + marvell,function = "gpio"; + }; + + pmx_audio1_gpio: pmx-audio1-gpio { + marvell,pins = "mpp_audio1"; + marvell,function = "gpio"; + }; + + pmx_audio1_i2s1_spdifo: pmx-audio1-i2s1-spdifo { + marvell,pins = "mpp_audio1"; + marvell,function = "i2s1/spdifo"; + }; + + pmx_spi0: pmx-spi0 { + marvell,pins = "mpp_spi0"; + marvell,function = "spi0"; + }; + + pmx_spi0_gpio: pmx-spi0-gpio { + marvell,pins = "mpp_spi0"; + marvell,function = "gpio"; + }; + + pmx_uart1: pmx-uart1 { + marvell,pins = "mpp_uart1"; + marvell,function = "uart1"; + }; + + pmx_uart1_gpio: pmx-uart1-gpio { + marvell,pins = "mpp_uart1"; + marvell,function = "gpio"; + }; + + pmx_nand: pmx-nand { + marvell,pins = "mpp_nand"; + marvell,function = "nand"; + }; + + pmx_nand_gpo: pmx-nand-gpo { + marvell,pins = "mpp_nand"; + marvell,function = "gpo"; + }; + }; + + spi0: spi-ctrl@10600 { + compatible = "marvell,orion-spi"; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + interrupts = <6>; + reg = <0x10600 0x28>; + clocks = <&core_clk 0>; + pinctrl-0 = <&pmx_spi0>; + pinctrl-names = "default"; + status = "disabled"; + }; + + spi1: spi-ctrl@14600 { + compatible = "marvell,orion-spi"; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + interrupts = <5>; + reg = <0x14600 0x28>; + clocks = <&core_clk 0>; + status = "disabled"; + }; + + i2c0: i2c-ctrl@11000 { + compatible = "marvell,mv64xxx-i2c"; + reg = <0x11000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <11>; + clock-frequency = <400000>; + timeout-ms = <1000>; + clocks = <&core_clk 0>; + status = "disabled"; + }; + + ehci0: usb-host@50000 { + compatible = "marvell,orion-ehci"; + reg = <0x50000 0x1000>; + interrupts = <24>; + clocks = <&gate_clk 0>; + status = "okay"; + }; + + ehci1: usb-host@51000 { + compatible = "marvell,orion-ehci"; + reg = <0x51000 0x1000>; + interrupts = <25>; + clocks = <&gate_clk 1>; + status = "okay"; + }; + + sdio0: sdio-host@92000 { + compatible = "marvell,dove-sdhci"; + reg = <0x92000 0x100>; + interrupts = <35>, <37>; + clocks = <&gate_clk 8>; + pinctrl-0 = <&pmx_sdio0>; + pinctrl-names = "default"; + status = "disabled"; + }; + + sdio1: sdio-host@90000 { + compatible = "marvell,dove-sdhci"; + reg = <0x90000 0x100>; + interrupts = <36>, <38>; + clocks = <&gate_clk 9>; + pinctrl-0 = <&pmx_sdio1>; + pinctrl-names = "default"; + status = "disabled"; + }; + + sata0: sata-host@a0000 { + compatible = "marvell,orion-sata"; + reg = <0xa0000 0x2400>; + interrupts = <62>; + clocks = <&gate_clk 3>; + nr-ports = <1>; + status = "disabled"; + }; + + rtc: real-time-clock@d8500 { + compatible = "marvell,orion-rtc"; + reg = <0xd8500 0x20>; + }; + + crypto: crypto-engine@30000 { + compatible = "marvell,orion-crypto"; + reg = <0x30000 0x10000>, + <0xffffe000 0x800>; + reg-names = "regs", "sram"; + interrupts = <31>; + clocks = <&gate_clk 15>; + status = "okay"; + }; + + xor0: dma-engine@60800 { + compatible = "marvell,orion-xor"; + reg = <0x60800 0x100 + 0x60a00 0x100>; + clocks = <&gate_clk 23>; + status = "okay"; + + channel0 { + interrupts = <39>; + dmacap,memcpy; + dmacap,xor; + }; + + channel1 { + interrupts = <40>; + dmacap,memcpy; + dmacap,xor; + }; + }; + + xor1: dma-engine@60900 { + compatible = "marvell,orion-xor"; + reg = <0x60900 0x100 + 0x60b00 0x100>; + clocks = <&gate_clk 24>; + status = "okay"; + + channel0 { + interrupts = <42>; + dmacap,memcpy; + dmacap,xor; + }; + + channel1 { + interrupts = <43>; + dmacap,memcpy; + dmacap,xor; + }; + }; + + mdio: mdio-bus@72004 { + compatible = "marvell,orion-mdio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72004 0x84>; + interrupts = <30>; + clocks = <&gate_clk 2>; + status = "disabled"; + + ethphy: ethernet-phy { + device-type = "ethernet-phy"; + /* set phy address in board file */ + }; + }; + + eth: ethernet-ctrl@72000 { + compatible = "marvell,orion-eth"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72000 0x4000>; + clocks = <&gate_clk 2>; + marvell,tx-checksum-limit = <1600>; + status = "disabled"; + + ethernet-port@0 { + device_type = "network"; + compatible = "marvell,orion-eth-port"; + reg = <0>; + interrupts = <29>; + /* overwrite MAC address in bootloader */ + local-mac-address = [00 00 00 00 00 00]; + phy-handle = <ðphy>; + }; + }; + + audio0: audio-controller@b0000 { + compatible = "marvell,dove-audio"; + reg = <0xb0000 0x2210>; + interrupts = <19>, <20>; + clocks = <&gate_clk 12>; + clock-names = "internal"; + status = "disabled"; + }; + + audio1: audio-controller@b4000 { + compatible = "marvell,dove-audio"; + reg = <0xb4000 0x2210>; + interrupts = <21>, <22>; + clocks = <&gate_clk 13>; + clock-names = "internal"; + status = "disabled"; }; }; }; diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts new file mode 100644 index 00000000000..5babba0a3a7 --- /dev/null +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -0,0 +1,275 @@ +/* + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "dra7.dtsi" + +/ { + model = "TI DRA7"; + compatible = "ti,dra7-evm", "ti,dra752", "ti,dra7"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x60000000>; /* 1536 MB */ + }; + + mmc2_3v3: fixedregulator-mmc2 { + compatible = "regulator-fixed"; + regulator-name = "mmc2_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&dra7_pmx_core { + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + 0x400 (PIN_INPUT | MUX_MODE0) /* i2c1_sda */ + 0x404 (PIN_INPUT | MUX_MODE0) /* i2c1_scl */ + >; + }; + + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + 0x408 (PIN_INPUT | MUX_MODE0) /* i2c2_sda */ + 0x40c (PIN_INPUT | MUX_MODE0) /* i2c2_scl */ + >; + }; + + i2c3_pins: pinmux_i2c3_pins { + pinctrl-single,pins = < + 0x410 (PIN_INPUT | MUX_MODE0) /* i2c3_sda */ + 0x414 (PIN_INPUT | MUX_MODE0) /* i2c3_scl */ + >; + }; + + mcspi1_pins: pinmux_mcspi1_pins { + pinctrl-single,pins = < + 0x3a4 (PIN_INPUT | MUX_MODE0) /* spi2_clk */ + 0x3a8 (PIN_INPUT | MUX_MODE0) /* spi2_d1 */ + 0x3ac (PIN_INPUT | MUX_MODE0) /* spi2_d0 */ + 0x3b0 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs0 */ + 0x3b4 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs1 */ + 0x3b8 (PIN_INPUT_SLEW | MUX_MODE6) /* spi2_cs2 */ + 0x3bc (PIN_INPUT_SLEW | MUX_MODE6) /* spi2_cs3 */ + >; + }; + + mcspi2_pins: pinmux_mcspi2_pins { + pinctrl-single,pins = < + 0x3c0 (PIN_INPUT | MUX_MODE0) /* spi2_sclk */ + 0x3c4 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */ + 0x3c8 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */ + 0x3cc (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs0 */ + >; + }; + + uart1_pins: pinmux_uart1_pins { + pinctrl-single,pins = < + 0x3e0 (PIN_INPUT_SLEW | MUX_MODE0) /* uart1_rxd */ + 0x3e4 (PIN_INPUT_SLEW | MUX_MODE0) /* uart1_txd */ + 0x3e8 (PIN_INPUT | MUX_MODE3) /* uart1_ctsn */ + 0x3ec (PIN_INPUT | MUX_MODE3) /* uart1_rtsn */ + >; + }; + + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + 0x3f0 (PIN_INPUT | MUX_MODE0) /* uart2_rxd */ + 0x3f4 (PIN_INPUT | MUX_MODE0) /* uart2_txd */ + 0x3f8 (PIN_INPUT | MUX_MODE0) /* uart2_ctsn */ + 0x3fc (PIN_INPUT | MUX_MODE0) /* uart2_rtsn */ + >; + }; + + uart3_pins: pinmux_uart3_pins { + pinctrl-single,pins = < + 0x248 (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd */ + 0x24c (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */ + >; + }; +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + clock-frequency = <400000>; + + tps659038: tps659038@58 { + compatible = "ti,tps659038"; + reg = <0x58>; + + tps659038_pmic { + compatible = "ti,tps659038-pmic"; + + regulators { + smps123_reg: smps123 { + /* VDD_MPU */ + regulator-name = "smps123"; + regulator-min-microvolt = < 850000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + regulator-boot-on; + }; + + smps45_reg: smps45 { + /* VDD_DSPEVE */ + regulator-name = "smps45"; + regulator-min-microvolt = < 850000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + }; + + smps6_reg: smps6 { + /* VDD_GPU - over VDD_SMPS6 */ + regulator-name = "smps6"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <12500000>; + regulator-boot-on; + }; + + smps7_reg: smps7 { + /* CORE_VDD */ + regulator-name = "smps7"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1030000>; + regulator-always-on; + regulator-boot-on; + }; + + smps8_reg: smps8 { + /* VDD_IVAHD */ + regulator-name = "smps8"; + regulator-min-microvolt = < 850000>; + regulator-max-microvolt = <1250000>; + regulator-boot-on; + }; + + smps9_reg: smps9 { + /* VDDS1V8 */ + regulator-name = "smps9"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo1_reg: ldo1 { + /* LDO1_OUT --> SDIO */ + regulator-name = "ldo1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + ldo2_reg: ldo2 { + /* VDD_RTCIO */ + /* LDO2 -> VDDSHV5, LDO2 also goes to CAN_PHY_3V3 */ + regulator-name = "ldo2"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + ldo3_reg: ldo3 { + /* VDDA_1V8_PHY */ + regulator-name = "ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + ldo9_reg: ldo9 { + /* VDD_RTC */ + regulator-name = "ldo9"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-boot-on; + }; + + ldoln_reg: ldoln { + /* VDDA_1V8_PLL */ + regulator-name = "ldoln"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldousb_reg: ldousb { + /* VDDA_3V_USB: VDDA_USBHS33 */ + regulator-name = "ldousb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + }; + }; + }; +}; + +&i2c2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + clock-frequency = <400000>; +}; + +&i2c3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; + clock-frequency = <3400000>; +}; + +&mcspi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mcspi1_pins>; +}; + +&mcspi2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mcspi2_pins>; +}; + +&uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; +}; + +&uart2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; +}; + +&uart3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; +}; + +&mmc1 { + status = "okay"; + vmmc-supply = <&ldo1_reg>; + bus-width = <4>; +}; + +&mmc2 { + status = "okay"; + vmmc-supply = <&mmc2_3v3>; + bus-width = <8>; +}; + +&cpu0 { + cpu0-supply = <&smps123_reg>; +}; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi new file mode 100644 index 00000000000..d0df4c4e8b0 --- /dev/null +++ b/arch/arm/boot/dts/dra7.dtsi @@ -0,0 +1,586 @@ +/* + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * Based on "omap4.dtsi" + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/pinctrl/dra.h> + +#include "skeleton.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + + compatible = "ti,dra7xx"; + interrupt-parent = <&gic>; + + aliases { + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; + i2c3 = &i2c4; + i2c4 = &i2c5; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + serial5 = &uart6; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + + operating-points = < + /* kHz uV */ + 1000000 1060000 + 1176000 1160000 + >; + }; + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <1>; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + }; + + gic: interrupt-controller@48211000 { + compatible = "arm,cortex-a15-gic"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x48211000 0x1000>, + <0x48212000 0x1000>, + <0x48214000 0x2000>, + <0x48216000 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + /* + * The soc node represents the soc top level view. It is uses for IPs + * that are not memory mapped in the MPU view or for the MPU itself. + */ + soc { + compatible = "ti,omap-infra"; + mpu { + compatible = "ti,omap5-mpu"; + ti,hwmods = "mpu"; + }; + }; + + /* + * XXX: Use a flat representation of the SOC interconnect. + * The real OMAP interconnect network is quite complex. + * Since that will not bring real advantage to represent that in DT for + * the moment, just use a fake OCP bus entry to represent the whole bus + * hierarchy. + */ + ocp { + compatible = "ti,omap4-l3-noc", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + ti,hwmods = "l3_main_1", "l3_main_2"; + reg = <0x44000000 0x2000>, + <0x44800000 0x3000>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + + counter32k: counter@4ae04000 { + compatible = "ti,omap-counter32k"; + reg = <0x4ae04000 0x40>; + ti,hwmods = "counter_32k"; + }; + + dra7_pmx_core: pinmux@4a003400 { + compatible = "pinctrl-single"; + reg = <0x4a003400 0x0464>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x3fffffff>; + }; + + sdma: dma-controller@4a056000 { + compatible = "ti,omap4430-sdma"; + reg = <0x4a056000 0x1000>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + #dma-channels = <32>; + #dma-requests = <127>; + }; + + gpio1: gpio@4ae10000 { + compatible = "ti,omap4-gpio"; + reg = <0x4ae10000 0x200>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "gpio1"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio2: gpio@48055000 { + compatible = "ti,omap4-gpio"; + reg = <0x48055000 0x200>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "gpio2"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio3: gpio@48057000 { + compatible = "ti,omap4-gpio"; + reg = <0x48057000 0x200>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "gpio3"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio4: gpio@48059000 { + compatible = "ti,omap4-gpio"; + reg = <0x48059000 0x200>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "gpio4"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio5: gpio@4805b000 { + compatible = "ti,omap4-gpio"; + reg = <0x4805b000 0x200>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "gpio5"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio6: gpio@4805d000 { + compatible = "ti,omap4-gpio"; + reg = <0x4805d000 0x200>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "gpio6"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio7: gpio@48051000 { + compatible = "ti,omap4-gpio"; + reg = <0x48051000 0x200>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "gpio7"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio8: gpio@48053000 { + compatible = "ti,omap4-gpio"; + reg = <0x48053000 0x200>; + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "gpio8"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + uart1: serial@4806a000 { + compatible = "ti,omap4-uart"; + reg = <0x4806a000 0x100>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "uart1"; + clock-frequency = <48000000>; + status = "disabled"; + }; + + uart2: serial@4806c000 { + compatible = "ti,omap4-uart"; + reg = <0x4806c000 0x100>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "uart2"; + clock-frequency = <48000000>; + status = "disabled"; + }; + + uart3: serial@48020000 { + compatible = "ti,omap4-uart"; + reg = <0x48020000 0x100>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "uart3"; + clock-frequency = <48000000>; + status = "disabled"; + }; + + uart4: serial@4806e000 { + compatible = "ti,omap4-uart"; + reg = <0x4806e000 0x100>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "uart4"; + clock-frequency = <48000000>; + status = "disabled"; + }; + + uart5: serial@48066000 { + compatible = "ti,omap4-uart"; + reg = <0x48066000 0x100>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "uart5"; + clock-frequency = <48000000>; + status = "disabled"; + }; + + uart6: serial@48068000 { + compatible = "ti,omap4-uart"; + reg = <0x48068000 0x100>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "uart6"; + clock-frequency = <48000000>; + status = "disabled"; + }; + + uart7: serial@48420000 { + compatible = "ti,omap4-uart"; + reg = <0x48420000 0x100>; + ti,hwmods = "uart7"; + clock-frequency = <48000000>; + status = "disabled"; + }; + + uart8: serial@48422000 { + compatible = "ti,omap4-uart"; + reg = <0x48422000 0x100>; + ti,hwmods = "uart8"; + clock-frequency = <48000000>; + status = "disabled"; + }; + + uart9: serial@48424000 { + compatible = "ti,omap4-uart"; + reg = <0x48424000 0x100>; + ti,hwmods = "uart9"; + clock-frequency = <48000000>; + status = "disabled"; + }; + + uart10: serial@4ae2b000 { + compatible = "ti,omap4-uart"; + reg = <0x4ae2b000 0x100>; + ti,hwmods = "uart10"; + clock-frequency = <48000000>; + status = "disabled"; + }; + + timer1: timer@4ae18000 { + compatible = "ti,omap5430-timer"; + reg = <0x4ae18000 0x80>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "timer1"; + ti,timer-alwon; + }; + + timer2: timer@48032000 { + compatible = "ti,omap5430-timer"; + reg = <0x48032000 0x80>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "timer2"; + }; + + timer3: timer@48034000 { + compatible = "ti,omap5430-timer"; + reg = <0x48034000 0x80>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "timer3"; + }; + + timer4: timer@48036000 { + compatible = "ti,omap5430-timer"; + reg = <0x48036000 0x80>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "timer4"; + }; + + timer5: timer@48820000 { + compatible = "ti,omap5430-timer"; + reg = <0x48820000 0x80>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "timer5"; + ti,timer-dsp; + }; + + timer6: timer@48822000 { + compatible = "ti,omap5430-timer"; + reg = <0x48822000 0x80>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "timer6"; + ti,timer-dsp; + ti,timer-pwm; + }; + + timer7: timer@48824000 { + compatible = "ti,omap5430-timer"; + reg = <0x48824000 0x80>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "timer7"; + ti,timer-dsp; + }; + + timer8: timer@48826000 { + compatible = "ti,omap5430-timer"; + reg = <0x48826000 0x80>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "timer8"; + ti,timer-dsp; + ti,timer-pwm; + }; + + timer9: timer@4803e000 { + compatible = "ti,omap5430-timer"; + reg = <0x4803e000 0x80>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "timer9"; + }; + + timer10: timer@48086000 { + compatible = "ti,omap5430-timer"; + reg = <0x48086000 0x80>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "timer10"; + }; + + timer11: timer@48088000 { + compatible = "ti,omap5430-timer"; + reg = <0x48088000 0x80>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "timer11"; + ti,timer-pwm; + }; + + timer13: timer@48828000 { + compatible = "ti,omap5430-timer"; + reg = <0x48828000 0x80>; + ti,hwmods = "timer13"; + status = "disabled"; + }; + + timer14: timer@4882a000 { + compatible = "ti,omap5430-timer"; + reg = <0x4882a000 0x80>; + ti,hwmods = "timer14"; + status = "disabled"; + }; + + timer15: timer@4882c000 { + compatible = "ti,omap5430-timer"; + reg = <0x4882c000 0x80>; + ti,hwmods = "timer15"; + status = "disabled"; + }; + + timer16: timer@4882e000 { + compatible = "ti,omap5430-timer"; + reg = <0x4882e000 0x80>; + ti,hwmods = "timer16"; + status = "disabled"; + }; + + wdt2: wdt@4ae14000 { + compatible = "ti,omap4-wdt"; + reg = <0x4ae14000 0x80>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "wd_timer2"; + }; + + i2c1: i2c@48070000 { + compatible = "ti,omap4-i2c"; + reg = <0x48070000 0x100>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c1"; + status = "disabled"; + }; + + i2c2: i2c@48072000 { + compatible = "ti,omap4-i2c"; + reg = <0x48072000 0x100>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c2"; + status = "disabled"; + }; + + i2c3: i2c@48060000 { + compatible = "ti,omap4-i2c"; + reg = <0x48060000 0x100>; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c3"; + status = "disabled"; + }; + + i2c4: i2c@4807a000 { + compatible = "ti,omap4-i2c"; + reg = <0x4807a000 0x100>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c4"; + status = "disabled"; + }; + + i2c5: i2c@4807c000 { + compatible = "ti,omap4-i2c"; + reg = <0x4807c000 0x100>; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c5"; + status = "disabled"; + }; + + mmc1: mmc@4809c000 { + compatible = "ti,omap4-hsmmc"; + reg = <0x4809c000 0x400>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "mmc1"; + ti,dual-volt; + ti,needs-special-reset; + dmas = <&sdma 61>, <&sdma 62>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + mmc2: mmc@480b4000 { + compatible = "ti,omap4-hsmmc"; + reg = <0x480b4000 0x400>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "mmc2"; + ti,needs-special-reset; + dmas = <&sdma 47>, <&sdma 48>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + mmc3: mmc@480ad000 { + compatible = "ti,omap4-hsmmc"; + reg = <0x480ad000 0x400>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "mmc3"; + ti,needs-special-reset; + dmas = <&sdma 77>, <&sdma 78>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + mmc4: mmc@480d1000 { + compatible = "ti,omap4-hsmmc"; + reg = <0x480d1000 0x400>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "mmc4"; + ti,needs-special-reset; + dmas = <&sdma 57>, <&sdma 58>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + mcspi1: spi@48098000 { + compatible = "ti,omap4-mcspi"; + reg = <0x48098000 0x200>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "mcspi1"; + ti,spi-num-cs = <4>; + dmas = <&sdma 35>, + <&sdma 36>, + <&sdma 37>, + <&sdma 38>, + <&sdma 39>, + <&sdma 40>, + <&sdma 41>, + <&sdma 42>; + dma-names = "tx0", "rx0", "tx1", "rx1", + "tx2", "rx2", "tx3", "rx3"; + status = "disabled"; + }; + + mcspi2: spi@4809a000 { + compatible = "ti,omap4-mcspi"; + reg = <0x4809a000 0x200>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "mcspi2"; + ti,spi-num-cs = <2>; + dmas = <&sdma 43>, + <&sdma 44>, + <&sdma 45>, + <&sdma 46>; + dma-names = "tx0", "rx0", "tx1", "rx1"; + status = "disabled"; + }; + + mcspi3: spi@480b8000 { + compatible = "ti,omap4-mcspi"; + reg = <0x480b8000 0x200>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "mcspi3"; + ti,spi-num-cs = <2>; + dmas = <&sdma 15>, <&sdma 16>; + dma-names = "tx0", "rx0"; + status = "disabled"; + }; + + mcspi4: spi@480ba000 { + compatible = "ti,omap4-mcspi"; + reg = <0x480ba000 0x200>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "mcspi4"; + ti,spi-num-cs = <1>; + dmas = <&sdma 70>, <&sdma 71>; + dma-names = "tx0", "rx0"; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/ecx-common.dtsi b/arch/arm/boot/dts/ecx-common.dtsi index e8559b753c9..bc22557d7a6 100644 --- a/arch/arm/boot/dts/ecx-common.dtsi +++ b/arch/arm/boot/dts/ecx-common.dtsi @@ -19,6 +19,14 @@ bootargs = "console=ttyAMA0"; }; + psci { + compatible = "arm,psci"; + method = "smc"; + cpu_suspend = <0x84000002>; + cpu_off = <0x84000004>; + cpu_on = <0x84000006>; + }; + soc { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/emev2-kzm9d-reference.dts b/arch/arm/boot/dts/emev2-kzm9d-reference.dts deleted file mode 100644 index cceefda268b..00000000000 --- a/arch/arm/boot/dts/emev2-kzm9d-reference.dts +++ /dev/null @@ -1,57 +0,0 @@ -/* - * Device Tree Source for the KZM9D board - * - * Copyright (C) 2013 Renesas Solutions Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ -/dts-v1/; - -/include/ "emev2.dtsi" - -/ { - model = "EMEV2 KZM9D Board"; - compatible = "renesas,kzm9d-reference", "renesas,emev2"; - - memory { - device_type = "memory"; - reg = <0x40000000 0x8000000>; - }; - - chosen { - bootargs = "console=ttyS1,115200n81 ignore_loglevel root=/dev/nfs ip=dhcp"; - }; - - reg_1p8v: regulator@0 { - compatible = "regulator-fixed"; - regulator-name = "fixed-1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - reg_3p3v: regulator@1 { - compatible = "regulator-fixed"; - regulator-name = "fixed-3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - }; - - lan9220@20000000 { - compatible = "smsc,lan9220", "smsc,lan9115"; - reg = <0x20000000 0x10000>; - phy-mode = "mii"; - interrupt-parent = <&gpio0>; - interrupts = <1 1>; /* active high */ - reg-io-width = <4>; - smsc,irq-active-high; - smsc,irq-push-pull; - vddvario-supply = <®_1p8v>; - vdd33a-supply = <®_3p3v>; - }; -}; diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts index f92e812fdd9..861aa7d6fc7 100644 --- a/arch/arm/boot/dts/emev2-kzm9d.dts +++ b/arch/arm/boot/dts/emev2-kzm9d.dts @@ -1,7 +1,7 @@ /* * Device Tree Source for the KZM9D board * - * Copyright (C) 2012 Renesas Solutions Corp. + * Copyright (C) 2013 Renesas Solutions Corp. * * This file is licensed under the terms of the GNU General Public License * version 2. This program is licensed "as is" without any warranty of any @@ -23,4 +23,35 @@ chosen { bootargs = "console=ttyS1,115200n81 ignore_loglevel root=/dev/nfs ip=dhcp"; }; + + reg_1p8v: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_3p3v: regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + lan9220@20000000 { + compatible = "smsc,lan9220", "smsc,lan9115"; + reg = <0x20000000 0x10000>; + phy-mode = "mii"; + interrupt-parent = <&gpio0>; + interrupts = <1 1>; /* active high */ + reg-io-width = <4>; + smsc,irq-active-high; + smsc,irq-push-pull; + vddvario-supply = <®_1p8v>; + vdd33a-supply = <®_3p3v>; + }; }; diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index caadc025734..a73eeb5f258 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -49,6 +49,12 @@ reg = <0x10000000 0x100>; }; + mipi_phy: video-phy@10020710 { + compatible = "samsung,s5pv210-mipi-video-phy"; + reg = <0x10020710 8>; + #phy-cells = <1>; + }; + pd_mfc: mfc-power-domain@10023C40 { compatible = "samsung,exynos4210-pd"; reg = <0x10023C40 0x20>; @@ -161,6 +167,8 @@ clock-names = "csis", "sclk_csis"; bus-width = <4>; samsung,power-domain = <&pd_cam>; + phys = <&mipi_phy 0>; + phy-names = "csis"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -174,6 +182,8 @@ clock-names = "csis", "sclk_csis"; bus-width = <2>; samsung,power-domain = <&pd_cam>; + phys = <&mipi_phy 2>; + phy-names = "csis"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index 382d8c7e290..1a12fb23767 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -32,13 +32,20 @@ bootargs ="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc"; }; - mmc_reg: voltage-regulator { - compatible = "regulator-fixed"; - regulator-name = "VMEM_VDD_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - gpio = <&gpx1 1 0>; - enable-active-high; + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + mmc_reg: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "VMEM_VDD_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpx1 1 0>; + enable-active-high; + }; }; tmu@100C0000 { @@ -192,7 +199,12 @@ }; buck1_reg: BUCK1 { - regulator-name = "VDD_ARM_1.2V"; + /* + * HACK: The real name is VDD_ARM_1.2V, + * but exynos-cpufreq does not support + * DT-based regulator lookup yet. + */ + regulator-name = "vdd_arm"; regulator-min-microvolt = <950000>; regulator-max-microvolt = <1350000>; regulator-always-on; diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index 1c164f234bc..63cc571ca30 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -290,7 +290,12 @@ }; varm_breg: BUCK1 { - regulator-name = "VARM_1.2V_C210"; + /* + * HACK: The real name is VARM_1.2V_C210, + * but exynos-cpufreq does not support + * DT-based regulator lookup yet. + */ + regulator-name = "vdd_arm"; regulator-min-microvolt = <900000>; regulator-max-microvolt = <1350000>; regulator-always-on; diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index 889cdada1ce..d2e3f5f5916 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -350,3 +350,7 @@ status = "okay"; }; }; + +&mdma1 { + reg = <0x12840000 0x1000>; +}; diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts index 8768b03702e..d65984c440f 100644 --- a/arch/arm/boot/dts/exynos4412-origen.dts +++ b/arch/arm/boot/dts/exynos4412-origen.dts @@ -32,13 +32,20 @@ reg = <0x0203F000 0x1000>; }; - mmc_reg: voltage-regulator { - compatible = "regulator-fixed"; - regulator-name = "VMEM_VDD_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - gpio = <&gpx1 1 0>; - enable-active-high; + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + mmc_reg: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "VMEM_VDD_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpx1 1 0>; + enable-active-high; + }; }; pinctrl@11000000 { diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index cee55fa3373..684527087aa 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -324,7 +324,14 @@ }; i2c@12C80000 { - status = "disabled"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + samsung,i2c-slave-addr = <0x50>; + + hdmiddc@50 { + compatible = "samsung,exynos4210-hdmiddc"; + reg = <0x50>; + }; }; i2c@12C90000 { @@ -362,6 +369,17 @@ status = "disabled"; }; + i2c@12CE0000 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + samsung,i2c-slave-addr = <0x38>; + + hdmiphy@38 { + compatible = "samsung,exynos4212-hdmiphy"; + reg = <0x38>; + }; + }; + i2c@121D0000 { status = "disabled"; }; @@ -412,6 +430,10 @@ status = "disabled"; }; + i2s0: i2s@03830000 { + status = "okay"; + }; + spi_0: spi@12d20000 { status = "disabled"; }; @@ -482,13 +504,15 @@ #address-cells = <1>; #size-cells = <0>; - main_dc_reg: fixedregulator@1 { + main_dc_reg: regulator@0 { compatible = "regulator-fixed"; + reg = <0>; regulator-name = "MAIN_DC"; }; - mmc_reg: voltage-regulator { + mmc_reg: regulator@1 { compatible = "regulator-fixed"; + reg = <1>; regulator-name = "VDD_33ON_2.8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; @@ -496,8 +520,9 @@ enable-active-high; }; - reg_hdmi_en: fixedregulator@0 { + reg_hdmi_en: regulator@2 { compatible = "regulator-fixed"; + reg = <2>; regulator-name = "hdmi-en"; }; }; diff --git a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi index 724a22f9b1c..9a49e6804ae 100644 --- a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi @@ -210,21 +210,21 @@ samsung,pins = "gpa0-2", "gpa0-3"; samsung,pin-function = <2>; samsung,pin-pud = <0>; - samaung,pin-drv = <0>; + samsung,pin-drv = <0>; }; i2c2_bus: i2c2-bus { samsung,pins = "gpa0-6", "gpa0-7"; samsung,pin-function = <3>; samsung,pin-pud = <3>; - samaung,pin-drv = <0>; + samsung,pin-drv = <0>; }; i2c2_hs_bus: i2c2-hs-bus { samsung,pins = "gpa0-6", "gpa0-7"; samsung,pin-function = <4>; samsung,pin-pud = <3>; - samaung,pin-drv = <0>; + samsung,pin-drv = <0>; }; uart2_data: uart2-data { @@ -238,21 +238,21 @@ samsung,pins = "gpa1-2", "gpa1-3"; samsung,pin-function = <2>; samsung,pin-pud = <0>; - samaung,pin-drv = <0>; + samsung,pin-drv = <0>; }; i2c3_bus: i2c3-bus { samsung,pins = "gpa1-2", "gpa1-3"; samsung,pin-function = <3>; samsung,pin-pud = <3>; - samaung,pin-drv = <0>; + samsung,pin-drv = <0>; }; i2c3_hs_bus: i2c3-hs-bus { samsung,pins = "gpa1-2", "gpa1-3"; samsung,pin-function = <4>; samsung,pin-pud = <3>; - samaung,pin-drv = <0>; + samsung,pin-drv = <0>; }; uart3_data: uart3-data { @@ -273,14 +273,14 @@ samsung,pins = "gpa2-0", "gpa2-1"; samsung,pin-function = <3>; samsung,pin-pud = <3>; - samaung,pin-drv = <0>; + samsung,pin-drv = <0>; }; i2c5_bus: i2c5-bus { samsung,pins = "gpa2-2", "gpa2-3"; samsung,pin-function = <3>; samsung,pin-pud = <3>; - samaung,pin-drv = <0>; + samsung,pin-drv = <0>; }; spi1_bus: spi1-bus { @@ -376,14 +376,14 @@ samsung,pins = "gpb3-0", "gpb3-1"; samsung,pin-function = <4>; samsung,pin-pud = <3>; - samaung,pin-drv = <0>; + samsung,pin-drv = <0>; }; i2c1_hs_bus: i2c1-hs-bus { samsung,pins = "gpb3-2", "gpb3-3"; samsung,pin-function = <4>; samsung,pin-pud = <3>; - samaung,pin-drv = <0>; + samsung,pin-drv = <0>; }; sd0_clk: sd0-clk { @@ -551,14 +551,14 @@ samsung,pins = "gpd0-2", "gpd0-3"; samsung,pin-function = <2>; samsung,pin-pud = <0>; - samaung,pin-drv = <0>; + samsung,pin-drv = <0>; }; dp_hpd: dp_hpd { samsung,pins = "gpx0-7"; samsung,pin-function = <3>; samsung,pin-pud = <0>; - samaung,pin-drv = <0>; + samsung,pin-drv = <0>; }; }; @@ -649,42 +649,42 @@ "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3"; samsung,pin-function = <3>; samsung,pin-pud = <0>; - samaung,pin-drv = <0>; + samsung,pin-drv = <0>; }; cam_i2c2_bus: cam-i2c2-bus { samsung,pins = "gpe0-6", "gpe1-0"; samsung,pin-function = <4>; samsung,pin-pud = <3>; - samaung,pin-drv = <0>; + samsung,pin-drv = <0>; }; cam_spi1_bus: cam-spi1-bus { samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3"; samsung,pin-function = <4>; samsung,pin-pud = <0>; - samaung,pin-drv = <0>; + samsung,pin-drv = <0>; }; cam_i2c1_bus: cam-i2c1-bus { samsung,pins = "gpf0-2", "gpf0-3"; samsung,pin-function = <2>; samsung,pin-pud = <3>; - samaung,pin-drv = <0>; + samsung,pin-drv = <0>; }; cam_i2c0_bus: cam-i2c0-bus { samsung,pins = "gpf0-0", "gpf0-1"; samsung,pin-function = <2>; samsung,pin-pud = <3>; - samaung,pin-drv = <0>; + samsung,pin-drv = <0>; }; cam_spi0_bus: cam-spi0-bus { samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3"; samsung,pin-function = <2>; samsung,pin-pud = <0>; - samaung,pin-drv = <0>; + samsung,pin-drv = <0>; }; cam_bayrgb_bus: cam-bayrgb-bus { @@ -695,7 +695,7 @@ "gpg2-0", "gpg2-1"; samsung,pin-function = <2>; samsung,pin-pud = <0>; - samaung,pin-drv = <0>; + samsung,pin-drv = <0>; }; cam_port_a: cam-port-a { @@ -704,7 +704,7 @@ "gph1-4", "gph1-5", "gph1-6", "gph1-7"; samsung,pin-function = <2>; samsung,pin-pud = <0>; - samaung,pin-drv = <0>; + samsung,pin-drv = <0>; }; }; @@ -756,7 +756,7 @@ "gpv1-4", "gpv1-5", "gpv1-6", "gpv1-7"; samsung,pin-function = <2>; samsung,pin-pud = <0>; - samaung,pin-drv = <0>; + samsung,pin-drv = <0>; }; c2c_txd: c2c-txd { @@ -766,7 +766,7 @@ "gpv3-4", "gpv3-5", "gpv3-6", "gpv3-7"; samsung,pin-function = <2>; samsung,pin-pud = <0>; - samaung,pin-drv = <0>; + samsung,pin-drv = <0>; }; }; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 2538b329f2c..f86d56760a4 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -231,14 +231,6 @@ status = "okay"; }; - i2s1: i2s@12D60000 { - status = "disabled"; - }; - - i2s2: i2s@12D70000 { - status = "disabled"; - }; - sound { compatible = "samsung,smdk-wm8994"; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index bbac42a78ce..9db5047812f 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -422,6 +422,7 @@ i2s0: i2s@03830000 { compatible = "samsung,s5pv210-i2s"; + status = "disabled"; reg = <0x03830000 0x100>; dmas = <&pdma0 10 &pdma0 9 @@ -438,6 +439,7 @@ i2s1: i2s@12D60000 { compatible = "samsung,s3c6410-i2s"; + status = "disabled"; reg = <0x12D60000 0x100>; dmas = <&pdma1 12 &pdma1 11>; @@ -450,6 +452,7 @@ i2s2: i2s@12D70000 { compatible = "samsung,s3c6410-i2s"; + status = "disabled"; reg = <0x12D70000 0x100>; dmas = <&pdma0 12 &pdma0 11>; @@ -615,16 +618,18 @@ compatible = "samsung,exynos4212-hdmi"; reg = <0x14530000 0x70000>; interrupts = <0 95 0>; - clocks = <&clock 333>, <&clock 136>, <&clock 137>, - <&clock 333>, <&clock 333>; + clocks = <&clock 344>, <&clock 136>, <&clock 137>, + <&clock 159>, <&clock 1024>; clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", - "sclk_hdmiphy", "hdmiphy"; + "sclk_hdmiphy", "mout_hdmi"; }; mixer { compatible = "samsung,exynos5250-mixer"; reg = <0x14450000 0x10000>; interrupts = <0 94 0>; + clocks = <&clock 343>, <&clock 136>; + clock-names = "mixer", "sclk_hdmi"; }; dp_phy: video-phy@10040720 { diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts index bafba25ba7c..79524c74c60 100644 --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts @@ -61,4 +61,30 @@ }; }; + pinctrl@13400000 { + hdmi_hpd_irq: hdmi-hpd-irq { + samsung,pins = "gpx3-7"; + samsung,pin-function = <0>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; + }; + + hdmi@14530000 { + status = "okay"; + hpd-gpio = <&gpx3 7 0>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_hpd_irq>; + }; + + i2c_2: i2c@12C80000 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + status = "okay"; + + hdmiddc@50 { + compatible = "samsung,exynos4210-hdmiddc"; + reg = <0x50>; + }; + }; }; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index d537cd704e1..09aa06cb3d3 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -27,6 +27,10 @@ pinctrl2 = &pinctrl_2; pinctrl3 = &pinctrl_3; pinctrl4 = &pinctrl_4; + i2c0 = &i2c_0; + i2c1 = &i2c_1; + i2c2 = &i2c_2; + i2c3 = &i2c_3; }; cpus { @@ -235,4 +239,75 @@ io-channel-ranges; status = "disabled"; }; + + i2c_0: i2c@12C60000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x12C60000 0x100>; + interrupts = <0 56 0>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clock 261>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_bus>; + status = "disabled"; + }; + + i2c_1: i2c@12C70000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x12C70000 0x100>; + interrupts = <0 57 0>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clock 262>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_bus>; + status = "disabled"; + }; + + i2c_2: i2c@12C80000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x12C80000 0x100>; + interrupts = <0 58 0>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clock 263>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_bus>; + status = "disabled"; + }; + + i2c_3: i2c@12C90000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x12C90000 0x100>; + interrupts = <0 59 0>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clock 264>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_bus>; + status = "disabled"; + }; + + hdmi@14530000 { + compatible = "samsung,exynos4212-hdmi"; + reg = <0x14530000 0x70000>; + interrupts = <0 95 0>; + clocks = <&clock 413>, <&clock 143>, <&clock 768>, + <&clock 158>, <&clock 640>; + clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", + "sclk_hdmiphy", "mout_hdmi"; + status = "disabled"; + }; + + mixer@14450000 { + compatible = "samsung,exynos5420-mixer"; + reg = <0x14450000 0x10000>; + interrupts = <0 94 0>; + clocks = <&clock 431>, <&clock 143>; + clock-names = "mixer", "sclk_hdmi"; + }; }; diff --git a/arch/arm/boot/dts/exynos5440-sd5v1.dts b/arch/arm/boot/dts/exynos5440-sd5v1.dts index 5b22508050d..777fb1c2c70 100644 --- a/arch/arm/boot/dts/exynos5440-sd5v1.dts +++ b/arch/arm/boot/dts/exynos5440-sd5v1.dts @@ -17,7 +17,7 @@ compatible = "samsung,sd5v1", "samsung,exynos5440"; chosen { - bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel early_printk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200"; + bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel earlyprintk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200"; }; fixed-rate-clocks { diff --git a/arch/arm/boot/dts/exynos5440-ssdk5440.dts b/arch/arm/boot/dts/exynos5440-ssdk5440.dts index ede772741f8..d58cb787061 100644 --- a/arch/arm/boot/dts/exynos5440-ssdk5440.dts +++ b/arch/arm/boot/dts/exynos5440-ssdk5440.dts @@ -17,7 +17,7 @@ compatible = "samsung,ssdk5440", "samsung,exynos5440"; chosen { - bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel early_printk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200"; + bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel earlyprintk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200"; }; spi_0: spi@D0000 { @@ -68,9 +68,11 @@ pcie@290000 { reset-gpio = <&pin_ctrl 5 0>; + status = "okay"; }; pcie@2a0000 { reset-gpio = <&pin_ctrl 22 0>; + status = "okay"; }; }; diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi index 5d6cf4965d6..8da107088ce 100644 --- a/arch/arm/boot/dts/exynos5440.dtsi +++ b/arch/arm/boot/dts/exynos5440.dtsi @@ -276,6 +276,7 @@ interrupt-map-mask = <0 0 0 0>; interrupt-map = <0x0 0 &gic 53>; num-lanes = <4>; + status = "disabled"; }; pcie@2a0000 { @@ -296,5 +297,6 @@ interrupt-map-mask = <0 0 0 0>; interrupt-map = <0x0 0 &gic 56>; num-lanes = <4>; + status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts index 185c7c01102..1f026adefd4 100644 --- a/arch/arm/boot/dts/imx23-evk.dts +++ b/arch/arm/boot/dts/imx23-evk.dts @@ -10,7 +10,7 @@ */ /dts-v1/; -/include/ "imx23.dtsi" +#include "imx23.dtsi" / { model = "Freescale i.MX23 Evaluation Kit"; @@ -45,14 +45,14 @@ hog_pins_a: hog@0 { reg = <0>; fsl,pinmux-ids = < - 0x1123 /* MX23_PAD_LCD_RESET__GPIO_1_18 */ - 0x11d3 /* MX23_PAD_PWM3__GPIO_1_29 */ - 0x11e3 /* MX23_PAD_PWM4__GPIO_1_30 */ - 0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */ + MX23_PAD_LCD_RESET__GPIO_1_18 + MX23_PAD_PWM3__GPIO_1_29 + MX23_PAD_PWM4__GPIO_1_30 + MX23_PAD_SSP1_DETECT__SSP1_DETECT >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; }; diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts index fc766ae12e2..526bfdbd87f 100644 --- a/arch/arm/boot/dts/imx23-olinuxino.dts +++ b/arch/arm/boot/dts/imx23-olinuxino.dts @@ -12,7 +12,7 @@ */ /dts-v1/; -/include/ "imx23.dtsi" +#include "imx23.dtsi" / { model = "i.MX23 Olinuxino Low Cost Board"; @@ -40,21 +40,21 @@ hog_pins_a: hog@0 { reg = <0>; fsl,pinmux-ids = < - 0x0113 /* MX23_PAD_GPMI_ALE__GPIO_0_17 */ + MX23_PAD_GPMI_ALE__GPIO_0_17 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; led_pin_gpio2_1: led_gpio2_1@0 { reg = <0>; fsl,pinmux-ids = < - 0x2013 /* MX23_PAD_SSP1_DETECT__GPIO_2_1 */ + MX23_PAD_SSP1_DETECT__GPIO_2_1 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; }; diff --git a/arch/arm/boot/dts/imx23-pinfunc.h b/arch/arm/boot/dts/imx23-pinfunc.h new file mode 100644 index 00000000000..5c0f32ca3a9 --- /dev/null +++ b/arch/arm/boot/dts/imx23-pinfunc.h @@ -0,0 +1,333 @@ +/* + * Header providing constants for i.MX23 pinctrl bindings. + * + * Copyright (C) 2013 Lothar Waßmann <LW@KARO-electronics.de> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#ifndef __DT_BINDINGS_MX23_PINCTRL_H__ +#define __DT_BINDINGS_MX23_PINCTRL_H__ + +#include "mxs-pinfunc.h" + +#define MX23_PAD_GPMI_D00__GPMI_D00 0x0000 +#define MX23_PAD_GPMI_D01__GPMI_D01 0x0010 +#define MX23_PAD_GPMI_D02__GPMI_D02 0x0020 +#define MX23_PAD_GPMI_D03__GPMI_D03 0x0030 +#define MX23_PAD_GPMI_D04__GPMI_D04 0x0040 +#define MX23_PAD_GPMI_D05__GPMI_D05 0x0050 +#define MX23_PAD_GPMI_D06__GPMI_D06 0x0060 +#define MX23_PAD_GPMI_D07__GPMI_D07 0x0070 +#define MX23_PAD_GPMI_D08__GPMI_D08 0x0080 +#define MX23_PAD_GPMI_D09__GPMI_D09 0x0090 +#define MX23_PAD_GPMI_D10__GPMI_D10 0x00a0 +#define MX23_PAD_GPMI_D11__GPMI_D11 0x00b0 +#define MX23_PAD_GPMI_D12__GPMI_D12 0x00c0 +#define MX23_PAD_GPMI_D13__GPMI_D13 0x00d0 +#define MX23_PAD_GPMI_D14__GPMI_D14 0x00e0 +#define MX23_PAD_GPMI_D15__GPMI_D15 0x00f0 +#define MX23_PAD_GPMI_CLE__GPMI_CLE 0x0100 +#define MX23_PAD_GPMI_ALE__GPMI_ALE 0x0110 +#define MX23_PAD_GPMI_CE2N__GPMI_CE2N 0x0120 +#define MX23_PAD_GPMI_RDY0__GPMI_RDY0 0x0130 +#define MX23_PAD_GPMI_RDY1__GPMI_RDY1 0x0140 +#define MX23_PAD_GPMI_RDY2__GPMI_RDY2 0x0150 +#define MX23_PAD_GPMI_RDY3__GPMI_RDY3 0x0160 +#define MX23_PAD_GPMI_WPN__GPMI_WPN 0x0170 +#define MX23_PAD_GPMI_WRN__GPMI_WRN 0x0180 +#define MX23_PAD_GPMI_RDN__GPMI_RDN 0x0190 +#define MX23_PAD_AUART1_CTS__AUART1_CTS 0x01a0 +#define MX23_PAD_AUART1_RTS__AUART1_RTS 0x01b0 +#define MX23_PAD_AUART1_RX__AUART1_RX 0x01c0 +#define MX23_PAD_AUART1_TX__AUART1_TX 0x01d0 +#define MX23_PAD_I2C_SCL__I2C_SCL 0x01e0 +#define MX23_PAD_I2C_SDA__I2C_SDA 0x01f0 +#define MX23_PAD_LCD_D00__LCD_D00 0x1000 +#define MX23_PAD_LCD_D01__LCD_D01 0x1010 +#define MX23_PAD_LCD_D02__LCD_D02 0x1020 +#define MX23_PAD_LCD_D03__LCD_D03 0x1030 +#define MX23_PAD_LCD_D04__LCD_D04 0x1040 +#define MX23_PAD_LCD_D05__LCD_D05 0x1050 +#define MX23_PAD_LCD_D06__LCD_D06 0x1060 +#define MX23_PAD_LCD_D07__LCD_D07 0x1070 +#define MX23_PAD_LCD_D08__LCD_D08 0x1080 +#define MX23_PAD_LCD_D09__LCD_D09 0x1090 +#define MX23_PAD_LCD_D10__LCD_D10 0x10a0 +#define MX23_PAD_LCD_D11__LCD_D11 0x10b0 +#define MX23_PAD_LCD_D12__LCD_D12 0x10c0 +#define MX23_PAD_LCD_D13__LCD_D13 0x10d0 +#define MX23_PAD_LCD_D14__LCD_D14 0x10e0 +#define MX23_PAD_LCD_D15__LCD_D15 0x10f0 +#define MX23_PAD_LCD_D16__LCD_D16 0x1100 +#define MX23_PAD_LCD_D17__LCD_D17 0x1110 +#define MX23_PAD_LCD_RESET__LCD_RESET 0x1120 +#define MX23_PAD_LCD_RS__LCD_RS 0x1130 +#define MX23_PAD_LCD_WR__LCD_WR 0x1140 +#define MX23_PAD_LCD_CS__LCD_CS 0x1150 +#define MX23_PAD_LCD_DOTCK__LCD_DOTCK 0x1160 +#define MX23_PAD_LCD_ENABLE__LCD_ENABLE 0x1170 +#define MX23_PAD_LCD_HSYNC__LCD_HSYNC 0x1180 +#define MX23_PAD_LCD_VSYNC__LCD_VSYNC 0x1190 +#define MX23_PAD_PWM0__PWM0 0x11a0 +#define MX23_PAD_PWM1__PWM1 0x11b0 +#define MX23_PAD_PWM2__PWM2 0x11c0 +#define MX23_PAD_PWM3__PWM3 0x11d0 +#define MX23_PAD_PWM4__PWM4 0x11e0 +#define MX23_PAD_SSP1_CMD__SSP1_CMD 0x2000 +#define MX23_PAD_SSP1_DETECT__SSP1_DETECT 0x2010 +#define MX23_PAD_SSP1_DATA0__SSP1_DATA0 0x2020 +#define MX23_PAD_SSP1_DATA1__SSP1_DATA1 0x2030 +#define MX23_PAD_SSP1_DATA2__SSP1_DATA2 0x2040 +#define MX23_PAD_SSP1_DATA3__SSP1_DATA3 0x2050 +#define MX23_PAD_SSP1_SCK__SSP1_SCK 0x2060 +#define MX23_PAD_ROTARYA__ROTARYA 0x2070 +#define MX23_PAD_ROTARYB__ROTARYB 0x2080 +#define MX23_PAD_EMI_A00__EMI_A00 0x2090 +#define MX23_PAD_EMI_A01__EMI_A01 0x20a0 +#define MX23_PAD_EMI_A02__EMI_A02 0x20b0 +#define MX23_PAD_EMI_A03__EMI_A03 0x20c0 +#define MX23_PAD_EMI_A04__EMI_A04 0x20d0 +#define MX23_PAD_EMI_A05__EMI_A05 0x20e0 +#define MX23_PAD_EMI_A06__EMI_A06 0x20f0 +#define MX23_PAD_EMI_A07__EMI_A07 0x2100 +#define MX23_PAD_EMI_A08__EMI_A08 0x2110 +#define MX23_PAD_EMI_A09__EMI_A09 0x2120 +#define MX23_PAD_EMI_A10__EMI_A10 0x2130 +#define MX23_PAD_EMI_A11__EMI_A11 0x2140 +#define MX23_PAD_EMI_A12__EMI_A12 0x2150 +#define MX23_PAD_EMI_BA0__EMI_BA0 0x2160 +#define MX23_PAD_EMI_BA1__EMI_BA1 0x2170 +#define MX23_PAD_EMI_CASN__EMI_CASN 0x2180 +#define MX23_PAD_EMI_CE0N__EMI_CE0N 0x2190 +#define MX23_PAD_EMI_CE1N__EMI_CE1N 0x21a0 +#define MX23_PAD_GPMI_CE1N__GPMI_CE1N 0x21b0 +#define MX23_PAD_GPMI_CE0N__GPMI_CE0N 0x21c0 +#define MX23_PAD_EMI_CKE__EMI_CKE 0x21d0 +#define MX23_PAD_EMI_RASN__EMI_RASN 0x21e0 +#define MX23_PAD_EMI_WEN__EMI_WEN 0x21f0 +#define MX23_PAD_EMI_D00__EMI_D00 0x3000 +#define MX23_PAD_EMI_D01__EMI_D01 0x3010 +#define MX23_PAD_EMI_D02__EMI_D02 0x3020 +#define MX23_PAD_EMI_D03__EMI_D03 0x3030 +#define MX23_PAD_EMI_D04__EMI_D04 0x3040 +#define MX23_PAD_EMI_D05__EMI_D05 0x3050 +#define MX23_PAD_EMI_D06__EMI_D06 0x3060 +#define MX23_PAD_EMI_D07__EMI_D07 0x3070 +#define MX23_PAD_EMI_D08__EMI_D08 0x3080 +#define MX23_PAD_EMI_D09__EMI_D09 0x3090 +#define MX23_PAD_EMI_D10__EMI_D10 0x30a0 +#define MX23_PAD_EMI_D11__EMI_D11 0x30b0 +#define MX23_PAD_EMI_D12__EMI_D12 0x30c0 +#define MX23_PAD_EMI_D13__EMI_D13 0x30d0 +#define MX23_PAD_EMI_D14__EMI_D14 0x30e0 +#define MX23_PAD_EMI_D15__EMI_D15 0x30f0 +#define MX23_PAD_EMI_DQM0__EMI_DQM0 0x3100 +#define MX23_PAD_EMI_DQM1__EMI_DQM1 0x3110 +#define MX23_PAD_EMI_DQS0__EMI_DQS0 0x3120 +#define MX23_PAD_EMI_DQS1__EMI_DQS1 0x3130 +#define MX23_PAD_EMI_CLK__EMI_CLK 0x3140 +#define MX23_PAD_EMI_CLKN__EMI_CLKN 0x3150 +#define MX23_PAD_GPMI_D00__LCD_D8 0x0001 +#define MX23_PAD_GPMI_D01__LCD_D9 0x0011 +#define MX23_PAD_GPMI_D02__LCD_D10 0x0021 +#define MX23_PAD_GPMI_D03__LCD_D11 0x0031 +#define MX23_PAD_GPMI_D04__LCD_D12 0x0041 +#define MX23_PAD_GPMI_D05__LCD_D13 0x0051 +#define MX23_PAD_GPMI_D06__LCD_D14 0x0061 +#define MX23_PAD_GPMI_D07__LCD_D15 0x0071 +#define MX23_PAD_GPMI_D08__LCD_D18 0x0081 +#define MX23_PAD_GPMI_D09__LCD_D19 0x0091 +#define MX23_PAD_GPMI_D10__LCD_D20 0x00a1 +#define MX23_PAD_GPMI_D11__LCD_D21 0x00b1 +#define MX23_PAD_GPMI_D12__LCD_D22 0x00c1 +#define MX23_PAD_GPMI_D13__LCD_D23 0x00d1 +#define MX23_PAD_GPMI_D14__AUART2_RX 0x00e1 +#define MX23_PAD_GPMI_D15__AUART2_TX 0x00f1 +#define MX23_PAD_GPMI_CLE__LCD_D16 0x0101 +#define MX23_PAD_GPMI_ALE__LCD_D17 0x0111 +#define MX23_PAD_GPMI_CE2N__ATA_A2 0x0121 +#define MX23_PAD_AUART1_RTS__IR_CLK 0x01b1 +#define MX23_PAD_AUART1_RX__IR_RX 0x01c1 +#define MX23_PAD_AUART1_TX__IR_TX 0x01d1 +#define MX23_PAD_I2C_SCL__GPMI_RDY2 0x01e1 +#define MX23_PAD_I2C_SDA__GPMI_CE2N 0x01f1 +#define MX23_PAD_LCD_D00__ETM_DA8 0x1001 +#define MX23_PAD_LCD_D01__ETM_DA9 0x1011 +#define MX23_PAD_LCD_D02__ETM_DA10 0x1021 +#define MX23_PAD_LCD_D03__ETM_DA11 0x1031 +#define MX23_PAD_LCD_D04__ETM_DA12 0x1041 +#define MX23_PAD_LCD_D05__ETM_DA13 0x1051 +#define MX23_PAD_LCD_D06__ETM_DA14 0x1061 +#define MX23_PAD_LCD_D07__ETM_DA15 0x1071 +#define MX23_PAD_LCD_D08__ETM_DA0 0x1081 +#define MX23_PAD_LCD_D09__ETM_DA1 0x1091 +#define MX23_PAD_LCD_D10__ETM_DA2 0x10a1 +#define MX23_PAD_LCD_D11__ETM_DA3 0x10b1 +#define MX23_PAD_LCD_D12__ETM_DA4 0x10c1 +#define MX23_PAD_LCD_D13__ETM_DA5 0x10d1 +#define MX23_PAD_LCD_D14__ETM_DA6 0x10e1 +#define MX23_PAD_LCD_D15__ETM_DA7 0x10f1 +#define MX23_PAD_LCD_RESET__ETM_TCTL 0x1121 +#define MX23_PAD_LCD_RS__ETM_TCLK 0x1131 +#define MX23_PAD_LCD_DOTCK__GPMI_RDY3 0x1161 +#define MX23_PAD_LCD_ENABLE__I2C_SCL 0x1171 +#define MX23_PAD_LCD_HSYNC__I2C_SDA 0x1181 +#define MX23_PAD_LCD_VSYNC__LCD_BUSY 0x1191 +#define MX23_PAD_PWM0__ROTARYA 0x11a1 +#define MX23_PAD_PWM1__ROTARYB 0x11b1 +#define MX23_PAD_PWM2__GPMI_RDY3 0x11c1 +#define MX23_PAD_PWM3__ETM_TCTL 0x11d1 +#define MX23_PAD_PWM4__ETM_TCLK 0x11e1 +#define MX23_PAD_SSP1_DETECT__GPMI_CE3N 0x2011 +#define MX23_PAD_SSP1_DATA1__I2C_SCL 0x2031 +#define MX23_PAD_SSP1_DATA2__I2C_SDA 0x2041 +#define MX23_PAD_ROTARYA__AUART2_RTS 0x2071 +#define MX23_PAD_ROTARYB__AUART2_CTS 0x2081 +#define MX23_PAD_GPMI_D00__SSP2_DATA0 0x0002 +#define MX23_PAD_GPMI_D01__SSP2_DATA1 0x0012 +#define MX23_PAD_GPMI_D02__SSP2_DATA2 0x0022 +#define MX23_PAD_GPMI_D03__SSP2_DATA3 0x0032 +#define MX23_PAD_GPMI_D04__SSP2_DATA4 0x0042 +#define MX23_PAD_GPMI_D05__SSP2_DATA5 0x0052 +#define MX23_PAD_GPMI_D06__SSP2_DATA6 0x0062 +#define MX23_PAD_GPMI_D07__SSP2_DATA7 0x0072 +#define MX23_PAD_GPMI_D08__SSP1_DATA4 0x0082 +#define MX23_PAD_GPMI_D09__SSP1_DATA5 0x0092 +#define MX23_PAD_GPMI_D10__SSP1_DATA6 0x00a2 +#define MX23_PAD_GPMI_D11__SSP1_DATA7 0x00b2 +#define MX23_PAD_GPMI_D15__GPMI_CE3N 0x00f2 +#define MX23_PAD_GPMI_RDY0__SSP2_DETECT 0x0132 +#define MX23_PAD_GPMI_RDY1__SSP2_CMD 0x0142 +#define MX23_PAD_GPMI_WRN__SSP2_SCK 0x0182 +#define MX23_PAD_AUART1_CTS__SSP1_DATA4 0x01a2 +#define MX23_PAD_AUART1_RTS__SSP1_DATA5 0x01b2 +#define MX23_PAD_AUART1_RX__SSP1_DATA6 0x01c2 +#define MX23_PAD_AUART1_TX__SSP1_DATA7 0x01d2 +#define MX23_PAD_I2C_SCL__AUART1_TX 0x01e2 +#define MX23_PAD_I2C_SDA__AUART1_RX 0x01f2 +#define MX23_PAD_LCD_D08__SAIF2_SDATA0 0x1082 +#define MX23_PAD_LCD_D09__SAIF1_SDATA0 0x1092 +#define MX23_PAD_LCD_D10__SAIF_MCLK_BITCLK 0x10a2 +#define MX23_PAD_LCD_D11__SAIF_LRCLK 0x10b2 +#define MX23_PAD_LCD_D12__SAIF2_SDATA1 0x10c2 +#define MX23_PAD_LCD_D13__SAIF2_SDATA2 0x10d2 +#define MX23_PAD_LCD_D14__SAIF1_SDATA2 0x10e2 +#define MX23_PAD_LCD_D15__SAIF1_SDATA1 0x10f2 +#define MX23_PAD_LCD_D16__SAIF_ALT_BITCLK 0x1102 +#define MX23_PAD_LCD_RESET__GPMI_CE3N 0x1122 +#define MX23_PAD_PWM0__DUART_RX 0x11a2 +#define MX23_PAD_PWM1__DUART_TX 0x11b2 +#define MX23_PAD_PWM3__AUART1_CTS 0x11d2 +#define MX23_PAD_PWM4__AUART1_RTS 0x11e2 +#define MX23_PAD_SSP1_CMD__JTAG_TDO 0x2002 +#define MX23_PAD_SSP1_DETECT__USB_OTG_ID 0x2012 +#define MX23_PAD_SSP1_DATA0__JTAG_TDI 0x2022 +#define MX23_PAD_SSP1_DATA1__JTAG_TCLK 0x2032 +#define MX23_PAD_SSP1_DATA2__JTAG_RTCK 0x2042 +#define MX23_PAD_SSP1_DATA3__JTAG_TMS 0x2052 +#define MX23_PAD_SSP1_SCK__JTAG_TRST 0x2062 +#define MX23_PAD_ROTARYA__SPDIF 0x2072 +#define MX23_PAD_ROTARYB__GPMI_CE3N 0x2082 +#define MX23_PAD_GPMI_D00__GPIO_0_0 0x0003 +#define MX23_PAD_GPMI_D01__GPIO_0_1 0x0013 +#define MX23_PAD_GPMI_D02__GPIO_0_2 0x0023 +#define MX23_PAD_GPMI_D03__GPIO_0_3 0x0033 +#define MX23_PAD_GPMI_D04__GPIO_0_4 0x0043 +#define MX23_PAD_GPMI_D05__GPIO_0_5 0x0053 +#define MX23_PAD_GPMI_D06__GPIO_0_6 0x0063 +#define MX23_PAD_GPMI_D07__GPIO_0_7 0x0073 +#define MX23_PAD_GPMI_D08__GPIO_0_8 0x0083 +#define MX23_PAD_GPMI_D09__GPIO_0_9 0x0093 +#define MX23_PAD_GPMI_D10__GPIO_0_10 0x00a3 +#define MX23_PAD_GPMI_D11__GPIO_0_11 0x00b3 +#define MX23_PAD_GPMI_D12__GPIO_0_12 0x00c3 +#define MX23_PAD_GPMI_D13__GPIO_0_13 0x00d3 +#define MX23_PAD_GPMI_D14__GPIO_0_14 0x00e3 +#define MX23_PAD_GPMI_D15__GPIO_0_15 0x00f3 +#define MX23_PAD_GPMI_CLE__GPIO_0_16 0x0103 +#define MX23_PAD_GPMI_ALE__GPIO_0_17 0x0113 +#define MX23_PAD_GPMI_CE2N__GPIO_0_18 0x0123 +#define MX23_PAD_GPMI_RDY0__GPIO_0_19 0x0133 +#define MX23_PAD_GPMI_RDY1__GPIO_0_20 0x0143 +#define MX23_PAD_GPMI_RDY2__GPIO_0_21 0x0153 +#define MX23_PAD_GPMI_RDY3__GPIO_0_22 0x0163 +#define MX23_PAD_GPMI_WPN__GPIO_0_23 0x0173 +#define MX23_PAD_GPMI_WRN__GPIO_0_24 0x0183 +#define MX23_PAD_GPMI_RDN__GPIO_0_25 0x0193 +#define MX23_PAD_AUART1_CTS__GPIO_0_26 0x01a3 +#define MX23_PAD_AUART1_RTS__GPIO_0_27 0x01b3 +#define MX23_PAD_AUART1_RX__GPIO_0_28 0x01c3 +#define MX23_PAD_AUART1_TX__GPIO_0_29 0x01d3 +#define MX23_PAD_I2C_SCL__GPIO_0_30 0x01e3 +#define MX23_PAD_I2C_SDA__GPIO_0_31 0x01f3 +#define MX23_PAD_LCD_D00__GPIO_1_0 0x1003 +#define MX23_PAD_LCD_D01__GPIO_1_1 0x1013 +#define MX23_PAD_LCD_D02__GPIO_1_2 0x1023 +#define MX23_PAD_LCD_D03__GPIO_1_3 0x1033 +#define MX23_PAD_LCD_D04__GPIO_1_4 0x1043 +#define MX23_PAD_LCD_D05__GPIO_1_5 0x1053 +#define MX23_PAD_LCD_D06__GPIO_1_6 0x1063 +#define MX23_PAD_LCD_D07__GPIO_1_7 0x1073 +#define MX23_PAD_LCD_D08__GPIO_1_8 0x1083 +#define MX23_PAD_LCD_D09__GPIO_1_9 0x1093 +#define MX23_PAD_LCD_D10__GPIO_1_10 0x10a3 +#define MX23_PAD_LCD_D11__GPIO_1_11 0x10b3 +#define MX23_PAD_LCD_D12__GPIO_1_12 0x10c3 +#define MX23_PAD_LCD_D13__GPIO_1_13 0x10d3 +#define MX23_PAD_LCD_D14__GPIO_1_14 0x10e3 +#define MX23_PAD_LCD_D15__GPIO_1_15 0x10f3 +#define MX23_PAD_LCD_D16__GPIO_1_16 0x1103 +#define MX23_PAD_LCD_D17__GPIO_1_17 0x1113 +#define MX23_PAD_LCD_RESET__GPIO_1_18 0x1123 +#define MX23_PAD_LCD_RS__GPIO_1_19 0x1133 +#define MX23_PAD_LCD_WR__GPIO_1_20 0x1143 +#define MX23_PAD_LCD_CS__GPIO_1_21 0x1153 +#define MX23_PAD_LCD_DOTCK__GPIO_1_22 0x1163 +#define MX23_PAD_LCD_ENABLE__GPIO_1_23 0x1173 +#define MX23_PAD_LCD_HSYNC__GPIO_1_24 0x1183 +#define MX23_PAD_LCD_VSYNC__GPIO_1_25 0x1193 +#define MX23_PAD_PWM0__GPIO_1_26 0x11a3 +#define MX23_PAD_PWM1__GPIO_1_27 0x11b3 +#define MX23_PAD_PWM2__GPIO_1_28 0x11c3 +#define MX23_PAD_PWM3__GPIO_1_29 0x11d3 +#define MX23_PAD_PWM4__GPIO_1_30 0x11e3 +#define MX23_PAD_SSP1_CMD__GPIO_2_0 0x2003 +#define MX23_PAD_SSP1_DETECT__GPIO_2_1 0x2013 +#define MX23_PAD_SSP1_DATA0__GPIO_2_2 0x2023 +#define MX23_PAD_SSP1_DATA1__GPIO_2_3 0x2033 +#define MX23_PAD_SSP1_DATA2__GPIO_2_4 0x2043 +#define MX23_PAD_SSP1_DATA3__GPIO_2_5 0x2053 +#define MX23_PAD_SSP1_SCK__GPIO_2_6 0x2063 +#define MX23_PAD_ROTARYA__GPIO_2_7 0x2073 +#define MX23_PAD_ROTARYB__GPIO_2_8 0x2083 +#define MX23_PAD_EMI_A00__GPIO_2_9 0x2093 +#define MX23_PAD_EMI_A01__GPIO_2_10 0x20a3 +#define MX23_PAD_EMI_A02__GPIO_2_11 0x20b3 +#define MX23_PAD_EMI_A03__GPIO_2_12 0x20c3 +#define MX23_PAD_EMI_A04__GPIO_2_13 0x20d3 +#define MX23_PAD_EMI_A05__GPIO_2_14 0x20e3 +#define MX23_PAD_EMI_A06__GPIO_2_15 0x20f3 +#define MX23_PAD_EMI_A07__GPIO_2_16 0x2103 +#define MX23_PAD_EMI_A08__GPIO_2_17 0x2113 +#define MX23_PAD_EMI_A09__GPIO_2_18 0x2123 +#define MX23_PAD_EMI_A10__GPIO_2_19 0x2133 +#define MX23_PAD_EMI_A11__GPIO_2_20 0x2143 +#define MX23_PAD_EMI_A12__GPIO_2_21 0x2153 +#define MX23_PAD_EMI_BA0__GPIO_2_22 0x2163 +#define MX23_PAD_EMI_BA1__GPIO_2_23 0x2173 +#define MX23_PAD_EMI_CASN__GPIO_2_24 0x2183 +#define MX23_PAD_EMI_CE0N__GPIO_2_25 0x2193 +#define MX23_PAD_EMI_CE1N__GPIO_2_26 0x21a3 +#define MX23_PAD_GPMI_CE1N__GPIO_2_27 0x21b3 +#define MX23_PAD_GPMI_CE0N__GPIO_2_28 0x21c3 +#define MX23_PAD_EMI_CKE__GPIO_2_29 0x21d3 +#define MX23_PAD_EMI_RASN__GPIO_2_30 0x21e3 +#define MX23_PAD_EMI_WEN__GPIO_2_31 0x21f3 + +#endif /* __DT_BINDINGS_MX23_PINCTRL_H__ */ diff --git a/arch/arm/boot/dts/imx23-stmp378x_devb.dts b/arch/arm/boot/dts/imx23-stmp378x_devb.dts index 85c3864b6a5..cb64e2b191e 100644 --- a/arch/arm/boot/dts/imx23-stmp378x_devb.dts +++ b/arch/arm/boot/dts/imx23-stmp378x_devb.dts @@ -10,7 +10,7 @@ */ /dts-v1/; -/include/ "imx23.dtsi" +#include "imx23.dtsi" / { model = "Freescale STMP378x Development Board"; @@ -39,12 +39,12 @@ hog_pins_a: hog@0 { reg = <0>; fsl,pinmux-ids = < - 0x11d3 /* MX23_PAD_PWM3__GPIO_1_29 */ - 0x11e3 /* MX23_PAD_PWM4__GPIO_1_30 */ + MX23_PAD_PWM3__GPIO_1_29 + MX23_PAD_PWM4__GPIO_1_30 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; }; }; diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index 28b5ce28966..c96ceaef7dd 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -9,7 +9,8 @@ * http://www.gnu.org/copyleft/gpl.html */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" +#include "imx23-pinfunc.h" / { interrupt-parent = <&icoll>; @@ -137,174 +138,174 @@ duart_pins_a: duart@0 { reg = <0>; fsl,pinmux-ids = < - 0x11a2 /* MX23_PAD_PWM0__DUART_RX */ - 0x11b2 /* MX23_PAD_PWM1__DUART_TX */ + MX23_PAD_PWM0__DUART_RX + MX23_PAD_PWM1__DUART_TX >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; auart0_pins_a: auart0@0 { reg = <0>; fsl,pinmux-ids = < - 0x01c0 /* MX23_PAD_AUART1_RX__AUART1_RX */ - 0x01d0 /* MX23_PAD_AUART1_TX__AUART1_TX */ - 0x01a0 /* MX23_PAD_AUART1_CTS__AUART1_CTS */ - 0x01b0 /* MX23_PAD_AUART1_RTS__AUART1_RTS */ + MX23_PAD_AUART1_RX__AUART1_RX + MX23_PAD_AUART1_TX__AUART1_TX + MX23_PAD_AUART1_CTS__AUART1_CTS + MX23_PAD_AUART1_RTS__AUART1_RTS >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; auart0_2pins_a: auart0-2pins@0 { reg = <0>; fsl,pinmux-ids = < - 0x01e2 /* MX23_PAD_I2C_SCL__AUART1_TX */ - 0x01f2 /* MX23_PAD_I2C_SDA__AUART1_RX */ + MX23_PAD_I2C_SCL__AUART1_TX + MX23_PAD_I2C_SDA__AUART1_RX >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; gpmi_pins_a: gpmi-nand@0 { reg = <0>; fsl,pinmux-ids = < - 0x0000 /* MX23_PAD_GPMI_D00__GPMI_D00 */ - 0x0010 /* MX23_PAD_GPMI_D01__GPMI_D01 */ - 0x0020 /* MX23_PAD_GPMI_D02__GPMI_D02 */ - 0x0030 /* MX23_PAD_GPMI_D03__GPMI_D03 */ - 0x0040 /* MX23_PAD_GPMI_D04__GPMI_D04 */ - 0x0050 /* MX23_PAD_GPMI_D05__GPMI_D05 */ - 0x0060 /* MX23_PAD_GPMI_D06__GPMI_D06 */ - 0x0070 /* MX23_PAD_GPMI_D07__GPMI_D07 */ - 0x0100 /* MX23_PAD_GPMI_CLE__GPMI_CLE */ - 0x0110 /* MX23_PAD_GPMI_ALE__GPMI_ALE */ - 0x0130 /* MX23_PAD_GPMI_RDY0__GPMI_RDY0 */ - 0x0140 /* MX23_PAD_GPMI_RDY1__GPMI_RDY1 */ - 0x0170 /* MX23_PAD_GPMI_WPN__GPMI_WPN */ - 0x0180 /* MX23_PAD_GPMI_WRN__GPMI_WRN */ - 0x0190 /* MX23_PAD_GPMI_RDN__GPMI_RDN */ - 0x21b0 /* MX23_PAD_GPMI_CE1N__GPMI_CE1N */ - 0x21c0 /* MX23_PAD_GPMI_CE0N__GPMI_CE0N */ + MX23_PAD_GPMI_D00__GPMI_D00 + MX23_PAD_GPMI_D01__GPMI_D01 + MX23_PAD_GPMI_D02__GPMI_D02 + MX23_PAD_GPMI_D03__GPMI_D03 + MX23_PAD_GPMI_D04__GPMI_D04 + MX23_PAD_GPMI_D05__GPMI_D05 + MX23_PAD_GPMI_D06__GPMI_D06 + MX23_PAD_GPMI_D07__GPMI_D07 + MX23_PAD_GPMI_CLE__GPMI_CLE + MX23_PAD_GPMI_ALE__GPMI_ALE + MX23_PAD_GPMI_RDY0__GPMI_RDY0 + MX23_PAD_GPMI_RDY1__GPMI_RDY1 + MX23_PAD_GPMI_WPN__GPMI_WPN + MX23_PAD_GPMI_WRN__GPMI_WRN + MX23_PAD_GPMI_RDN__GPMI_RDN + MX23_PAD_GPMI_CE1N__GPMI_CE1N + MX23_PAD_GPMI_CE0N__GPMI_CE0N >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; gpmi_pins_fixup: gpmi-pins-fixup { fsl,pinmux-ids = < - 0x0170 /* MX23_PAD_GPMI_WPN__GPMI_WPN */ - 0x0180 /* MX23_PAD_GPMI_WRN__GPMI_WRN */ - 0x0190 /* MX23_PAD_GPMI_RDN__GPMI_RDN */ + MX23_PAD_GPMI_WPN__GPMI_WPN + MX23_PAD_GPMI_WRN__GPMI_WRN + MX23_PAD_GPMI_RDN__GPMI_RDN >; - fsl,drive-strength = <2>; + fsl,drive-strength = <MXS_DRIVE_12mA>; }; mmc0_4bit_pins_a: mmc0-4bit@0 { reg = <0>; fsl,pinmux-ids = < - 0x2020 /* MX23_PAD_SSP1_DATA0__SSP1_DATA0 */ - 0x2030 /* MX23_PAD_SSP1_DATA1__SSP1_DATA1 */ - 0x2040 /* MX23_PAD_SSP1_DATA2__SSP1_DATA2 */ - 0x2050 /* MX23_PAD_SSP1_DATA3__SSP1_DATA3 */ - 0x2000 /* MX23_PAD_SSP1_CMD__SSP1_CMD */ - 0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */ + MX23_PAD_SSP1_DATA0__SSP1_DATA0 + MX23_PAD_SSP1_DATA1__SSP1_DATA1 + MX23_PAD_SSP1_DATA2__SSP1_DATA2 + MX23_PAD_SSP1_DATA3__SSP1_DATA3 + MX23_PAD_SSP1_CMD__SSP1_CMD + MX23_PAD_SSP1_SCK__SSP1_SCK >; - fsl,drive-strength = <1>; - fsl,voltage = <1>; - fsl,pull-up = <1>; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; }; mmc0_8bit_pins_a: mmc0-8bit@0 { reg = <0>; fsl,pinmux-ids = < - 0x2020 /* MX23_PAD_SSP1_DATA0__SSP1_DATA0 */ - 0x2030 /* MX23_PAD_SSP1_DATA1__SSP1_DATA1 */ - 0x2040 /* MX23_PAD_SSP1_DATA2__SSP1_DATA2 */ - 0x2050 /* MX23_PAD_SSP1_DATA3__SSP1_DATA3 */ - 0x0082 /* MX23_PAD_GPMI_D08__SSP1_DATA4 */ - 0x0092 /* MX23_PAD_GPMI_D09__SSP1_DATA5 */ - 0x00a2 /* MX23_PAD_GPMI_D10__SSP1_DATA6 */ - 0x00b2 /* MX23_PAD_GPMI_D11__SSP1_DATA7 */ - 0x2000 /* MX23_PAD_SSP1_CMD__SSP1_CMD */ - 0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */ - 0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */ + MX23_PAD_SSP1_DATA0__SSP1_DATA0 + MX23_PAD_SSP1_DATA1__SSP1_DATA1 + MX23_PAD_SSP1_DATA2__SSP1_DATA2 + MX23_PAD_SSP1_DATA3__SSP1_DATA3 + MX23_PAD_GPMI_D08__SSP1_DATA4 + MX23_PAD_GPMI_D09__SSP1_DATA5 + MX23_PAD_GPMI_D10__SSP1_DATA6 + MX23_PAD_GPMI_D11__SSP1_DATA7 + MX23_PAD_SSP1_CMD__SSP1_CMD + MX23_PAD_SSP1_DETECT__SSP1_DETECT + MX23_PAD_SSP1_SCK__SSP1_SCK >; - fsl,drive-strength = <1>; - fsl,voltage = <1>; - fsl,pull-up = <1>; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; }; mmc0_pins_fixup: mmc0-pins-fixup { fsl,pinmux-ids = < - 0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */ - 0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */ + MX23_PAD_SSP1_DETECT__SSP1_DETECT + MX23_PAD_SSP1_SCK__SSP1_SCK >; - fsl,pull-up = <0>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; pwm2_pins_a: pwm2@0 { reg = <0>; fsl,pinmux-ids = < - 0x11c0 /* MX23_PAD_PWM2__PWM2 */ + MX23_PAD_PWM2__PWM2 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; lcdif_24bit_pins_a: lcdif-24bit@0 { reg = <0>; fsl,pinmux-ids = < - 0x1000 /* MX23_PAD_LCD_D00__LCD_D0 */ - 0x1010 /* MX23_PAD_LCD_D01__LCD_D1 */ - 0x1020 /* MX23_PAD_LCD_D02__LCD_D2 */ - 0x1030 /* MX23_PAD_LCD_D03__LCD_D3 */ - 0x1040 /* MX23_PAD_LCD_D04__LCD_D4 */ - 0x1050 /* MX23_PAD_LCD_D05__LCD_D5 */ - 0x1060 /* MX23_PAD_LCD_D06__LCD_D6 */ - 0x1070 /* MX23_PAD_LCD_D07__LCD_D7 */ - 0x1080 /* MX23_PAD_LCD_D08__LCD_D8 */ - 0x1090 /* MX23_PAD_LCD_D09__LCD_D9 */ - 0x10a0 /* MX23_PAD_LCD_D10__LCD_D10 */ - 0x10b0 /* MX23_PAD_LCD_D11__LCD_D11 */ - 0x10c0 /* MX23_PAD_LCD_D12__LCD_D12 */ - 0x10d0 /* MX23_PAD_LCD_D13__LCD_D13 */ - 0x10e0 /* MX23_PAD_LCD_D14__LCD_D14 */ - 0x10f0 /* MX23_PAD_LCD_D15__LCD_D15 */ - 0x1100 /* MX23_PAD_LCD_D16__LCD_D16 */ - 0x1110 /* MX23_PAD_LCD_D17__LCD_D17 */ - 0x0081 /* MX23_PAD_GPMI_D08__LCD_D18 */ - 0x0091 /* MX23_PAD_GPMI_D09__LCD_D19 */ - 0x00a1 /* MX23_PAD_GPMI_D10__LCD_D20 */ - 0x00b1 /* MX23_PAD_GPMI_D11__LCD_D21 */ - 0x00c1 /* MX23_PAD_GPMI_D12__LCD_D22 */ - 0x00d1 /* MX23_PAD_GPMI_D13__LCD_D23 */ - 0x1160 /* MX23_PAD_LCD_DOTCK__LCD_DOTCK */ - 0x1170 /* MX23_PAD_LCD_ENABLE__LCD_ENABLE */ - 0x1180 /* MX23_PAD_LCD_HSYNC__LCD_HSYNC */ - 0x1190 /* MX23_PAD_LCD_VSYNC__LCD_VSYNC */ + MX23_PAD_LCD_D00__LCD_D00 + MX23_PAD_LCD_D01__LCD_D01 + MX23_PAD_LCD_D02__LCD_D02 + MX23_PAD_LCD_D03__LCD_D03 + MX23_PAD_LCD_D04__LCD_D04 + MX23_PAD_LCD_D05__LCD_D05 + MX23_PAD_LCD_D06__LCD_D06 + MX23_PAD_LCD_D07__LCD_D07 + MX23_PAD_LCD_D08__LCD_D08 + MX23_PAD_LCD_D09__LCD_D09 + MX23_PAD_LCD_D10__LCD_D10 + MX23_PAD_LCD_D11__LCD_D11 + MX23_PAD_LCD_D12__LCD_D12 + MX23_PAD_LCD_D13__LCD_D13 + MX23_PAD_LCD_D14__LCD_D14 + MX23_PAD_LCD_D15__LCD_D15 + MX23_PAD_LCD_D16__LCD_D16 + MX23_PAD_LCD_D17__LCD_D17 + MX23_PAD_GPMI_D08__LCD_D18 + MX23_PAD_GPMI_D09__LCD_D19 + MX23_PAD_GPMI_D10__LCD_D20 + MX23_PAD_GPMI_D11__LCD_D21 + MX23_PAD_GPMI_D12__LCD_D22 + MX23_PAD_GPMI_D13__LCD_D23 + MX23_PAD_LCD_DOTCK__LCD_DOTCK + MX23_PAD_LCD_ENABLE__LCD_ENABLE + MX23_PAD_LCD_HSYNC__LCD_HSYNC + MX23_PAD_LCD_VSYNC__LCD_VSYNC >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; spi2_pins_a: spi2@0 { reg = <0>; fsl,pinmux-ids = < - 0x0182 /* MX23_PAD_GPMI_WRN__SSP2_SCK */ - 0x0142 /* MX23_PAD_GPMI_RDY1__SSP2_CMD */ - 0x0002 /* MX23_PAD_GPMI_D00__SSP2_DATA0 */ - 0x0032 /* MX23_PAD_GPMI_D03__SSP2_DATA3 */ + MX23_PAD_GPMI_WRN__SSP2_SCK + MX23_PAD_GPMI_RDY1__SSP2_CMD + MX23_PAD_GPMI_D00__SSP2_DATA0 + MX23_PAD_GPMI_D03__SSP2_DATA3 >; - fsl,drive-strength = <1>; - fsl,voltage = <1>; - fsl,pull-up = <1>; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; }; }; @@ -430,6 +431,7 @@ reg = <0x80050000 0x2000>; interrupts = <36 37 38 39 40 41 42 43 44>; status = "disabled"; + clocks = <&clks 26>; }; spdif@80054000 { diff --git a/arch/arm/boot/dts/imx27-apf27dev.dts b/arch/arm/boot/dts/imx27-apf27dev.dts index 2a377ca1881..47c8c26012e 100644 --- a/arch/arm/boot/dts/imx27-apf27dev.dts +++ b/arch/arm/boot/dts/imx27-apf27dev.dts @@ -16,6 +16,26 @@ model = "Armadeus Systems APF27Dev docking/development board"; compatible = "armadeus,imx27-apf27dev", "armadeus,imx27-apf27", "fsl,imx27"; + display: display { + model = "Chimei-LW700AT9003"; + native-mode = <&timing0>; + bits-per-pixel = <16>; /* non-standard but required */ + fsl,pcr = <0xfae80083>; /* non-standard but required */ + display-timings { + timing0: 640x480 { + clock-frequency = <33000033>; + hactive = <800>; + vactive = <640>; + hback-porch = <96>; + hfront-porch = <96>; + vback-porch = <20>; + vfront-porch = <21>; + hsync-len = <64>; + vsync-len = <4>; + }; + }; + }; + gpio-keys { compatible = "gpio-keys"; @@ -50,6 +70,12 @@ status = "okay"; }; +&fb { + display = <&display>; + fsl,dmacr = <0x00020010>; + status = "okay"; +}; + &i2c1 { clock-frequency = <400000>; status = "okay"; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index b7a1c6d950b..826231eb444 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -123,6 +123,7 @@ }; pwm: pwm@10006000 { + #pwm-cells = <2>; compatible = "fsl,imx27-pwm"; reg = <0x10006000 0x1000>; interrupts = <23>; diff --git a/arch/arm/boot/dts/imx28-apf28.dts b/arch/arm/boot/dts/imx28-apf28.dts index 7eb075876c4..7198fe3798c 100644 --- a/arch/arm/boot/dts/imx28-apf28.dts +++ b/arch/arm/boot/dts/imx28-apf28.dts @@ -10,7 +10,7 @@ */ /dts-v1/; -/include/ "imx28.dtsi" +#include "imx28.dtsi" / { model = "Armadeus Systems APF28 module"; diff --git a/arch/arm/boot/dts/imx28-apf28dev.dts b/arch/arm/boot/dts/imx28-apf28dev.dts index b602494c152..e2efd8d89c4 100644 --- a/arch/arm/boot/dts/imx28-apf28dev.dts +++ b/arch/arm/boot/dts/imx28-apf28dev.dts @@ -10,7 +10,7 @@ */ /* APF28Dev is a docking board for the APF28 SOM */ -/include/ "imx28-apf28.dts" +#include "imx28-apf28.dts" / { model = "Armadeus Systems APF28Dev docking/development board"; @@ -41,30 +41,30 @@ hog_pins_apf28dev: hog@0 { reg = <0>; fsl,pinmux-ids = < - 0x1103 /* MX28_PAD_LCD_D16__GPIO_1_16 */ - 0x1113 /* MX28_PAD_LCD_D17__GPIO_1_17 */ - 0x1123 /* MX28_PAD_LCD_D18__GPIO_1_18 */ - 0x1133 /* MX28_PAD_LCD_D19__GPIO_1_19 */ - 0x1143 /* MX28_PAD_LCD_D20__GPIO_1_20 */ - 0x1153 /* MX28_PAD_LCD_D21__GPIO_1_21 */ - 0x1163 /* MX28_PAD_LCD_D22__GPIO_1_22 */ + MX28_PAD_LCD_D16__GPIO_1_16 + MX28_PAD_LCD_D17__GPIO_1_17 + MX28_PAD_LCD_D18__GPIO_1_18 + MX28_PAD_LCD_D19__GPIO_1_19 + MX28_PAD_LCD_D20__GPIO_1_20 + MX28_PAD_LCD_D21__GPIO_1_21 + MX28_PAD_LCD_D22__GPIO_1_22 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; lcdif_pins_apf28dev: lcdif-apf28dev@0 { reg = <0>; fsl,pinmux-ids = < - 0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */ - 0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */ - 0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */ - 0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */ + MX28_PAD_LCD_RD_E__LCD_VSYNC + MX28_PAD_LCD_WR_RWN__LCD_HSYNC + MX28_PAD_LCD_RS__LCD_DOTCLK + MX28_PAD_LCD_CS__LCD_ENABLE >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; }; diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts index 0e7fed47bd8..6f254ca816c 100644 --- a/arch/arm/boot/dts/imx28-apx4devkit.dts +++ b/arch/arm/boot/dts/imx28-apx4devkit.dts @@ -1,5 +1,5 @@ /dts-v1/; -/include/ "imx28.dtsi" +#include "imx28.dtsi" / { model = "Bluegiga APX4 Development Kit"; @@ -40,53 +40,53 @@ hog_pins_a: hog@0 { reg = <0>; fsl,pinmux-ids = < - 0x0113 /* MX28_PAD_GPMI_CE1N__GPIO_0_17 */ - 0x0153 /* MX28_PAD_GPMI_RDY1__GPIO_0_21 */ - 0x2123 /* MX28_PAD_SSP2_MISO__GPIO_2_18 */ - 0x2131 /* MX28_PAD_SSP2_SS0__GPIO_2_19 */ - 0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */ - 0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */ - 0x4143 /* MX28_PAD_JTAG_RTCK__GPIO_4_20 */ + MX28_PAD_GPMI_CE1N__GPIO_0_17 + MX28_PAD_GPMI_RDY1__GPIO_0_21 + MX28_PAD_SSP2_MISO__GPIO_2_18 + MX28_PAD_SSP2_SS0__AUART3_TX /* was: 0x2131 - MX28_PAD_SSP2_SS0__GPIO_2_19 */ + MX28_PAD_PWM3__GPIO_3_28 + MX28_PAD_LCD_RESET__GPIO_3_30 + MX28_PAD_JTAG_RTCK__GPIO_4_20 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; lcdif_pins_apx4: lcdif-apx4@0 { reg = <0>; fsl,pinmux-ids = < - 0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */ - 0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */ - 0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */ - 0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */ + MX28_PAD_LCD_RD_E__LCD_VSYNC + MX28_PAD_LCD_WR_RWN__LCD_HSYNC + MX28_PAD_LCD_RS__LCD_DOTCLK + MX28_PAD_LCD_CS__LCD_ENABLE >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; mmc2_4bit_pins_apx4: mmc2-4bit-apx4@0 { reg = <0>; fsl,pinmux-ids = < - 0x2041 /* MX28_PAD_SSP0_DATA4__SSP2_D0 */ - 0x2051 /* MX28_PAD_SSP0_DATA5__SSP2_D3 */ - 0x2061 /* MX28_PAD_SSP0_DATA6__SSP2_CMD */ - 0x2071 /* MX28_PAD_SSP0_DATA7__SSP2_SCK */ - 0x2141 /* MX28_PAD_SSP2_SS1__SSP2_D1 */ - 0x2151 /* MX28_PAD_SSP2_SS2__SSP2_D2 */ + MX28_PAD_SSP0_DATA4__SSP2_D0 + MX28_PAD_SSP0_DATA5__SSP2_D3 + MX28_PAD_SSP0_DATA6__SSP2_CMD + MX28_PAD_SSP0_DATA7__SSP2_SCK + MX28_PAD_SSP2_SS1__SSP2_D1 + MX28_PAD_SSP2_SS2__SSP2_D2 >; - fsl,drive-strength = <1>; - fsl,voltage = <1>; - fsl,pull-up = <1>; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; }; mmc2_sck_cfg_apx4: mmc2-sck-cfg-apx4 { fsl,pinmux-ids = < - 0x2071 /* MX28_PAD_SSP0_DATA7__SSP2_SCK */ + MX28_PAD_SSP0_DATA7__SSP2_SCK >; - fsl,drive-strength = <2>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_12mA>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; }; diff --git a/arch/arm/boot/dts/imx28-cfa10036.dts b/arch/arm/boot/dts/imx28-cfa10036.dts index 1ec8c94bbac..cabb6171a19 100644 --- a/arch/arm/boot/dts/imx28-cfa10036.dts +++ b/arch/arm/boot/dts/imx28-cfa10036.dts @@ -10,7 +10,7 @@ */ /dts-v1/; -/include/ "imx28.dtsi" +#include "imx28.dtsi" / { model = "Crystalfontz CFA-10036 Board"; @@ -26,31 +26,31 @@ ssd1306_cfa10036: ssd1306-10036@0 { reg = <0>; fsl,pinmux-ids = < - 0x2073 /* MX28_PAD_SSP0_D7__GPIO_2_7 */ + MX28_PAD_SSP0_DATA7__GPIO_2_7 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; led_pins_cfa10036: leds-10036@0 { reg = <0>; fsl,pinmux-ids = < - 0x3043 /* MX28_PAD_AUART1_RX__GPIO_3_4 */ + MX28_PAD_AUART1_RX__GPIO_3_4 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; usb0_otg_cfa10036: otg-10036@0 { reg = <0>; fsl,pinmux-ids = < - 0x0142 /* MX28_PAD_GPMI_READY0__USB0_ID */ + MX28_PAD_GPMI_RDY0__USB0_ID >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; }; diff --git a/arch/arm/boot/dts/imx28-cfa10037.dts b/arch/arm/boot/dts/imx28-cfa10037.dts index 182b99fe35f..f93e9a700e5 100644 --- a/arch/arm/boot/dts/imx28-cfa10037.dts +++ b/arch/arm/boot/dts/imx28-cfa10037.dts @@ -13,7 +13,7 @@ * The CFA-10049 is an expansion board for the CFA-10036 module, thus we * need to include the CFA-10036 DTS. */ -/include/ "imx28-cfa10036.dts" +#include "imx28-cfa10036.dts" / { model = "Crystalfontz CFA-10037 Board"; @@ -25,21 +25,21 @@ usb_pins_cfa10037: usb-10037@0 { reg = <0>; fsl,pinmux-ids = < - 0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */ + MX28_PAD_GPMI_D07__GPIO_0_7 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; mac0_pins_cfa10037: mac0-10037@0 { reg = <0>; fsl,pinmux-ids = < - 0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */ + MX28_PAD_SSP2_SS2__GPIO_2_21 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; }; }; diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts index 06e4cfaf7dd..7087b4bf6a8 100644 --- a/arch/arm/boot/dts/imx28-cfa10049.dts +++ b/arch/arm/boot/dts/imx28-cfa10049.dts @@ -13,7 +13,7 @@ * The CFA-10049 is an expansion board for the CFA-10036 module, thus we * need to include the CFA-10036 DTS. */ -/include/ "imx28-cfa10036.dts" +#include "imx28-cfa10036.dts" / { model = "Crystalfontz CFA-10049 Board"; @@ -25,150 +25,150 @@ usb_pins_cfa10049: usb-10049@0 { reg = <0>; fsl,pinmux-ids = < - 0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */ + MX28_PAD_GPMI_D07__GPIO_0_7 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; i2cmux_pins_cfa10049: i2cmux-10049@0 { reg = <0>; fsl,pinmux-ids = < - 0x1163 /* MX28_PAD_LCD_D22__GPIO_1_22 */ - 0x1173 /* MX28_PAD_LCD_D22__GPIO_1_23 */ + MX28_PAD_LCD_D22__GPIO_1_22 + MX28_PAD_LCD_D23__GPIO_1_23 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; mac0_pins_cfa10049: mac0-10049@0 { reg = <0>; fsl,pinmux-ids = < - 0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */ + MX28_PAD_SSP2_SS2__GPIO_2_21 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; pca_pins_cfa10049: pca-10049@0 { reg = <0>; fsl,pinmux-ids = < - 0x2133 /* MX28_PAD_SSP2_D3__GPIO_2_19 */ + MX28_PAD_SSP2_SS0__GPIO_2_19 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <1>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; }; rotary_pins_cfa10049: rotary-10049@0 { reg = <0>; fsl,pinmux-ids = < - 0x3183 /* MX28_PAD_I2C0_SCL__GPIO_3_24 */ - 0x3193 /* MX28_PAD_I2C0_SDA__GPIO_3_25 */ + MX28_PAD_I2C0_SCL__GPIO_3_24 + MX28_PAD_I2C0_SDA__GPIO_3_25 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <1>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; }; rotary_btn_pins_cfa10049: rotary-btn-10049@0 { reg = <0>; fsl,pinmux-ids = < - 0x31a3 /* MX28_PAD_SAIF_SDATA0__GPIO_3_26 */ + MX28_PAD_SAIF1_SDATA0__GPIO_3_26 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <1>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; }; spi2_pins_cfa10049: spi2-cfa10049@0 { reg = <0>; fsl,pinmux-ids = < - 0x2103 /* MX28_PAD_SSP2_SCK__GPIO_2_16 */ - 0x2113 /* MX28_PAD_SSP2_CMD__GPIO_2_17 */ - 0x2123 /* MX28_PAD_SSP2_D0__GPIO_2_18 */ - 0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */ + MX28_PAD_SSP2_SCK__GPIO_2_16 + MX28_PAD_SSP2_MOSI__GPIO_2_17 + MX28_PAD_SSP2_MISO__GPIO_2_18 + MX28_PAD_AUART1_TX__GPIO_3_5 >; - fsl,drive-strength = <1>; - fsl,voltage = <1>; - fsl,pull-up = <1>; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; }; spi3_pins_cfa10049: spi3-cfa10049@0 { reg = <0>; fsl,pinmux-ids = < - 0x0183 /* MX28_PAD_GPMI_RDN__GPIO_0_24 */ - 0x01c3 /* MX28_PAD_GPMI_RESETN__GPIO_0_28 */ - 0x0113 /* MX28_PAD_GPMI_CE1N__GPIO_0_17 */ - 0x01a3 /* MX28_PAD_GPMI_ALE__GPIO_0_26 */ - 0x01b3 /* MX28_PAD_GPMI_CLE__GPIO_0_27 */ + MX28_PAD_GPMI_RDN__GPIO_0_24 + MX28_PAD_GPMI_RESETN__GPIO_0_28 + MX28_PAD_GPMI_CE1N__GPIO_0_17 + MX28_PAD_GPMI_ALE__GPIO_0_26 + MX28_PAD_GPMI_CLE__GPIO_0_27 >; - fsl,drive-strength = <1>; - fsl,voltage = <1>; - fsl,pull-up = <1>; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; }; lcdif_18bit_pins_cfa10049: lcdif-18bit@0 { reg = <0>; fsl,pinmux-ids = < - 0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */ - 0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */ - 0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */ - 0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */ - 0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */ - 0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */ - 0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */ - 0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */ - 0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */ - 0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */ - 0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */ - 0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */ - 0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */ - 0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */ - 0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */ - 0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */ - 0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */ - 0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */ + MX28_PAD_LCD_D00__LCD_D0 + MX28_PAD_LCD_D01__LCD_D1 + MX28_PAD_LCD_D02__LCD_D2 + MX28_PAD_LCD_D03__LCD_D3 + MX28_PAD_LCD_D04__LCD_D4 + MX28_PAD_LCD_D05__LCD_D5 + MX28_PAD_LCD_D06__LCD_D6 + MX28_PAD_LCD_D07__LCD_D7 + MX28_PAD_LCD_D08__LCD_D8 + MX28_PAD_LCD_D09__LCD_D9 + MX28_PAD_LCD_D10__LCD_D10 + MX28_PAD_LCD_D11__LCD_D11 + MX28_PAD_LCD_D12__LCD_D12 + MX28_PAD_LCD_D13__LCD_D13 + MX28_PAD_LCD_D14__LCD_D14 + MX28_PAD_LCD_D15__LCD_D15 + MX28_PAD_LCD_D16__LCD_D16 + MX28_PAD_LCD_D17__LCD_D17 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; lcdif_pins_cfa10049: lcdif-evk@0 { reg = <0>; fsl,pinmux-ids = < - 0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */ - 0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */ - 0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */ - 0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */ + MX28_PAD_LCD_RD_E__LCD_VSYNC + MX28_PAD_LCD_WR_RWN__LCD_HSYNC + MX28_PAD_LCD_RS__LCD_DOTCLK + MX28_PAD_LCD_CS__LCD_ENABLE >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; lcdif_pins_cfa10049_pullup: lcdif-10049-pullup@0 { reg = <0>; fsl,pinmux-ids = < - 0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */ + MX28_PAD_LCD_RESET__GPIO_3_30 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <1>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; }; w1_gpio_pins: w1-gpio@0 { reg = <0>; fsl,pinmux-ids = < - 0x1153 /* MX28_PAD_LCD_D21__GPIO_1_21 */ + MX28_PAD_LCD_D21__GPIO_1_21 >; - fsl,drive-strength = <1>; - fsl,voltage = <1>; - fsl,pull-up = <0>; /* 0 will enable the keeper */ + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; /* 0 will enable the keeper */ }; }; diff --git a/arch/arm/boot/dts/imx28-cfa10055.dts b/arch/arm/boot/dts/imx28-cfa10055.dts index 171bcbe1ec4..c3900e7ba33 100644 --- a/arch/arm/boot/dts/imx28-cfa10055.dts +++ b/arch/arm/boot/dts/imx28-cfa10055.dts @@ -14,7 +14,7 @@ * The CFA-10055 is an expansion board for the CFA-10036 module and * CFA-10037, thus we need to include the CFA-10037 DTS. */ -/include/ "imx28-cfa10037.dts" +#include "imx28-cfa10037.dts" / { model = "Crystalfontz CFA-10055 Board"; @@ -26,64 +26,64 @@ spi2_pins_cfa10055: spi2-cfa10055@0 { reg = <0>; fsl,pinmux-ids = < - 0x2103 /* MX28_PAD_SSP2_SCK__GPIO_2_16 */ - 0x2113 /* MX28_PAD_SSP2_CMD__GPIO_2_17 */ - 0x2123 /* MX28_PAD_SSP2_D0__GPIO_2_18 */ - 0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */ + MX28_PAD_SSP2_SCK__GPIO_2_16 + MX28_PAD_SSP2_MOSI__GPIO_2_17 + MX28_PAD_SSP2_MISO__GPIO_2_18 + MX28_PAD_AUART1_TX__GPIO_3_5 >; - fsl,drive-strength = <1>; - fsl,voltage = <1>; - fsl,pull-up = <1>; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; }; lcdif_18bit_pins_cfa10055: lcdif-18bit@0 { reg = <0>; fsl,pinmux-ids = < - 0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */ - 0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */ - 0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */ - 0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */ - 0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */ - 0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */ - 0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */ - 0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */ - 0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */ - 0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */ - 0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */ - 0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */ - 0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */ - 0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */ - 0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */ - 0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */ - 0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */ - 0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */ + MX28_PAD_LCD_D00__LCD_D0 + MX28_PAD_LCD_D01__LCD_D1 + MX28_PAD_LCD_D02__LCD_D2 + MX28_PAD_LCD_D03__LCD_D3 + MX28_PAD_LCD_D04__LCD_D4 + MX28_PAD_LCD_D05__LCD_D5 + MX28_PAD_LCD_D06__LCD_D6 + MX28_PAD_LCD_D07__LCD_D7 + MX28_PAD_LCD_D08__LCD_D8 + MX28_PAD_LCD_D09__LCD_D9 + MX28_PAD_LCD_D10__LCD_D10 + MX28_PAD_LCD_D11__LCD_D11 + MX28_PAD_LCD_D12__LCD_D12 + MX28_PAD_LCD_D13__LCD_D13 + MX28_PAD_LCD_D14__LCD_D14 + MX28_PAD_LCD_D15__LCD_D15 + MX28_PAD_LCD_D16__LCD_D16 + MX28_PAD_LCD_D17__LCD_D17 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; lcdif_pins_cfa10055: lcdif-evk@0 { reg = <0>; fsl,pinmux-ids = < - 0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */ - 0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */ - 0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */ - 0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */ + MX28_PAD_LCD_RD_E__LCD_VSYNC + MX28_PAD_LCD_WR_RWN__LCD_HSYNC + MX28_PAD_LCD_RS__LCD_DOTCLK + MX28_PAD_LCD_CS__LCD_ENABLE >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; lcdif_pins_cfa10055_pullup: lcdif-10055-pullup@0 { reg = <0>; fsl,pinmux-ids = < - 0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */ + MX28_PAD_LCD_RESET__GPIO_3_30 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <1>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; }; }; diff --git a/arch/arm/boot/dts/imx28-cfa10056.dts b/arch/arm/boot/dts/imx28-cfa10056.dts index b45dd0e4ee5..cef959a9721 100644 --- a/arch/arm/boot/dts/imx28-cfa10056.dts +++ b/arch/arm/boot/dts/imx28-cfa10056.dts @@ -13,7 +13,7 @@ * The CFA-10055 is an expansion board for the CFA-10036 module and * CFA-10037, thus we need to include the CFA-10037 DTS. */ -/include/ "imx28-cfa10037.dts" +#include "imx28-cfa10037.dts" / { model = "Crystalfontz CFA-10056 Board"; @@ -25,37 +25,37 @@ spi2_pins_cfa10056: spi2-cfa10056@0 { reg = <0>; fsl,pinmux-ids = < - 0x2103 /* MX28_PAD_SSP2_SCK__GPIO_2_16 */ - 0x2113 /* MX28_PAD_SSP2_CMD__GPIO_2_17 */ - 0x2123 /* MX28_PAD_SSP2_D0__GPIO_2_18 */ - 0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */ + MX28_PAD_SSP2_SCK__GPIO_2_16 + MX28_PAD_SSP2_MOSI__GPIO_2_17 + MX28_PAD_SSP2_MISO__GPIO_2_18 + MX28_PAD_AUART1_TX__GPIO_3_5 >; - fsl,drive-strength = <1>; - fsl,voltage = <1>; - fsl,pull-up = <1>; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; }; lcdif_pins_cfa10056: lcdif-10056@0 { reg = <0>; fsl,pinmux-ids = < - 0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */ - 0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */ - 0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */ - 0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */ + MX28_PAD_LCD_RD_E__LCD_VSYNC + MX28_PAD_LCD_WR_RWN__LCD_HSYNC + MX28_PAD_LCD_RS__LCD_DOTCLK + MX28_PAD_LCD_CS__LCD_ENABLE >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; lcdif_pins_cfa10056_pullup: lcdif-10056-pullup@0 { reg = <0>; fsl,pinmux-ids = < - 0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */ + MX28_PAD_LCD_RESET__GPIO_3_30 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <1>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; }; }; diff --git a/arch/arm/boot/dts/imx28-cfa10057.dts b/arch/arm/boot/dts/imx28-cfa10057.dts index 0333c0532f2..3c1312885ae 100644 --- a/arch/arm/boot/dts/imx28-cfa10057.dts +++ b/arch/arm/boot/dts/imx28-cfa10057.dts @@ -14,7 +14,7 @@ * The CFA-10057 is an expansion board for the CFA-10036 module, thus we * need to include the CFA-10036 DTS. */ -/include/ "imx28-cfa10036.dts" +#include "imx28-cfa10036.dts" / { model = "Crystalfontz CFA-10057 Board"; @@ -26,51 +26,51 @@ usb_pins_cfa10057: usb-10057@0 { reg = <0>; fsl,pinmux-ids = < - 0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */ + MX28_PAD_GPMI_D07__GPIO_0_7 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; lcdif_18bit_pins_cfa10057: lcdif-18bit@0 { reg = <0>; fsl,pinmux-ids = < - 0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */ - 0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */ - 0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */ - 0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */ - 0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */ - 0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */ - 0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */ - 0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */ - 0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */ - 0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */ - 0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */ - 0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */ - 0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */ - 0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */ - 0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */ - 0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */ - 0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */ - 0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */ + MX28_PAD_LCD_D00__LCD_D0 + MX28_PAD_LCD_D01__LCD_D1 + MX28_PAD_LCD_D02__LCD_D2 + MX28_PAD_LCD_D03__LCD_D3 + MX28_PAD_LCD_D04__LCD_D4 + MX28_PAD_LCD_D05__LCD_D5 + MX28_PAD_LCD_D06__LCD_D6 + MX28_PAD_LCD_D07__LCD_D7 + MX28_PAD_LCD_D08__LCD_D8 + MX28_PAD_LCD_D09__LCD_D9 + MX28_PAD_LCD_D10__LCD_D10 + MX28_PAD_LCD_D11__LCD_D11 + MX28_PAD_LCD_D12__LCD_D12 + MX28_PAD_LCD_D13__LCD_D13 + MX28_PAD_LCD_D14__LCD_D14 + MX28_PAD_LCD_D15__LCD_D15 + MX28_PAD_LCD_D16__LCD_D16 + MX28_PAD_LCD_D17__LCD_D17 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; lcdif_pins_cfa10057: lcdif-evk@0 { reg = <0>; fsl,pinmux-ids = < - 0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */ - 0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */ - 0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */ - 0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */ + MX28_PAD_LCD_RD_E__LCD_VSYNC + MX28_PAD_LCD_WR_RWN__LCD_HSYNC + MX28_PAD_LCD_RS__LCD_DOTCLK + MX28_PAD_LCD_CS__LCD_ENABLE >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; }; diff --git a/arch/arm/boot/dts/imx28-cfa10058.dts b/arch/arm/boot/dts/imx28-cfa10058.dts index 64c64c55a82..2469d34df0a 100644 --- a/arch/arm/boot/dts/imx28-cfa10058.dts +++ b/arch/arm/boot/dts/imx28-cfa10058.dts @@ -14,7 +14,7 @@ * The CFA-10058 is an expansion board for the CFA-10036 module, thus we * need to include the CFA-10036 DTS. */ -/include/ "imx28-cfa10036.dts" +#include "imx28-cfa10036.dts" / { model = "Crystalfontz CFA-10058 Board"; @@ -26,24 +26,24 @@ usb_pins_cfa10058: usb-10058@0 { reg = <0>; fsl,pinmux-ids = < - 0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */ + MX28_PAD_GPMI_D07__GPIO_0_7 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; lcdif_pins_cfa10058: lcdif-10058@0 { reg = <0>; fsl,pinmux-ids = < - 0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */ - 0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */ - 0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */ - 0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */ + MX28_PAD_LCD_RD_E__LCD_VSYNC + MX28_PAD_LCD_WR_RWN__LCD_HSYNC + MX28_PAD_LCD_RS__LCD_DOTCLK + MX28_PAD_LCD_CS__LCD_ENABLE >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; }; diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts index 15715d921d1..4267c2b05d6 100644 --- a/arch/arm/boot/dts/imx28-evk.dts +++ b/arch/arm/boot/dts/imx28-evk.dts @@ -10,7 +10,7 @@ */ /dts-v1/; -/include/ "imx28.dtsi" +#include "imx28.dtsi" / { model = "Freescale i.MX28 Evaluation Kit"; @@ -70,52 +70,52 @@ hog_pins_a: hog@0 { reg = <0>; fsl,pinmux-ids = < - 0x20d3 /* MX28_PAD_SSP1_CMD__GPIO_2_13 */ - 0x20f3 /* MX28_PAD_SSP1_DATA3__GPIO_2_15 */ - 0x40d3 /* MX28_PAD_ENET0_RX_CLK__GPIO_4_13 */ - 0x20c3 /* MX28_PAD_SSP1_SCK__GPIO_2_12 */ - 0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */ - 0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */ - 0x3083 /* MX28_PAD_AUART2_RX__GPIO_3_8 */ - 0x3093 /* MX28_PAD_AUART2_TX__GPIO_3_9 */ + MX28_PAD_SSP1_CMD__GPIO_2_13 + MX28_PAD_SSP1_DATA3__GPIO_2_15 + MX28_PAD_ENET0_RX_CLK__GPIO_4_13 + MX28_PAD_SSP1_SCK__GPIO_2_12 + MX28_PAD_PWM3__GPIO_3_28 + MX28_PAD_LCD_RESET__GPIO_3_30 + MX28_PAD_AUART2_RX__GPIO_3_8 + MX28_PAD_AUART2_TX__GPIO_3_9 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; led_pin_gpio3_5: led_gpio3_5@0 { reg = <0>; fsl,pinmux-ids = < - 0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */ + MX28_PAD_AUART1_TX__GPIO_3_5 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; gpmi_pins_evk: gpmi-nand-evk@0 { reg = <0>; fsl,pinmux-ids = < - 0x0110 /* MX28_PAD_GPMI_CE1N__GPMI_CE1N */ - 0x0150 /* MX28_PAD_GPMI_RDY1__GPMI_READY1 */ + MX28_PAD_GPMI_CE1N__GPMI_CE1N + MX28_PAD_GPMI_RDY1__GPMI_READY1 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; lcdif_pins_evk: lcdif-evk@0 { reg = <0>; fsl,pinmux-ids = < - 0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */ - 0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */ - 0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */ - 0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */ + MX28_PAD_LCD_RD_E__LCD_VSYNC + MX28_PAD_LCD_WR_RWN__LCD_HSYNC + MX28_PAD_LCD_RS__LCD_DOTCLK + MX28_PAD_LCD_CS__LCD_ENABLE >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; }; @@ -182,7 +182,12 @@ }; lradc@80050000 { + fsl,lradc-touchscreen-wires = <4>; status = "okay"; + fsl,lradc-touchscreen-wires = <4>; + fsl,ave-ctrl = <4>; + fsl,ave-delay = <2>; + fsl,settling = <10>; }; i2c0: i2c@80058000 { @@ -242,6 +247,8 @@ ahb@80080000 { usb0: usb@80080000 { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_pins_a>; vbus-supply = <®_usb0_vbus>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx28-m28cu3.dts b/arch/arm/boot/dts/imx28-m28cu3.dts new file mode 100644 index 00000000000..d3958da60bd --- /dev/null +++ b/arch/arm/boot/dts/imx28-m28cu3.dts @@ -0,0 +1,266 @@ +/* + * Copyright (C) 2013 Marek Vasut <marex@denx.de> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx28.dtsi" + +/ { + model = "MSR M28CU3"; + compatible = "msr,m28cu3", "fsl,imx28"; + + memory { + reg = <0x40000000 0x08000000>; + }; + + apb@80000000 { + apbh@80000000 { + gpmi-nand@8000c000 { + #address-cells = <1>; + #size-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; + status = "okay"; + + partition@0 { + label = "gpmi-nfc-0-boot"; + reg = <0x00000000 0x01400000>; + read-only; + }; + + partition@1 { + label = "gpmi-nfc-general-use"; + reg = <0x01400000 0x0ec00000>; + }; + }; + + ssp0: ssp@80010000 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a + &mmc0_cd_cfg + &mmc0_sck_cfg>; + bus-width = <4>; + vmmc-supply = <®_vddio_sd0>; + status = "okay"; + }; + + ssp2: ssp@80014000 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_4bit_pins_a + &mmc2_cd_cfg + &mmc2_sck_cfg>; + bus-width = <4>; + vmmc-supply = <®_vddio_sd1>; + status = "okay"; + }; + + pinctrl@80018000 { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SSP2_SS0__GPIO_2_19 + MX28_PAD_PWM4__GPIO_3_29 + MX28_PAD_AUART2_RX__GPIO_3_8 + MX28_PAD_ENET0_RX_CLK__GPIO_4_13 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + lcdif_pins_m28: lcdif-m28@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_VSYNC__LCD_VSYNC + MX28_PAD_LCD_HSYNC__LCD_HSYNC + MX28_PAD_LCD_DOTCLK__LCD_DOTCLK + MX28_PAD_LCD_RESET__LCD_RESET + MX28_PAD_LCD_CS__LCD_ENABLE + MX28_PAD_AUART1_TX__GPIO_3_5 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + led_pins_gpio: leds-m28@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SSP3_MISO__GPIO_2_26 + MX28_PAD_SSP3_SCK__GPIO_2_24 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + }; + + ocotp@8002c000 { + status = "okay"; + }; + + lcdif@80030000 { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_24bit_pins_a + &lcdif_pins_m28>; + display = <&display>; + reset-active-high; + status = "okay"; + + display: display0 { + bits-per-pixel = <32>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <6410256>; + hactive = <320>; + vactive = <240>; + hback-porch = <38>; + hfront-porch = <20>; + vback-porch = <15>; + vfront-porch = <5>; + hsync-len = <30>; + vsync-len = <3>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; + }; + }; + + apbx@80040000 { + duart: serial@80074000 { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_b>; + status = "okay"; + }; + + usbphy1: usbphy@8007e000 { + status = "okay"; + }; + + auart0: serial@8006a000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_2pins_a>; + status = "okay"; + }; + + auart3: serial@80070000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart3_2pins_b>; + status = "okay"; + }; + + pwm: pwm@80064000 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_pins_a>; + status = "okay"; + }; + }; + }; + + ahb@80080000 { + usb1: usb@80090000 { + vbus-supply = <®_usb1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&usbphy1_pins_a>; + disable-over-current; + status = "okay"; + }; + + mac0: ethernet@800f0000 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + phy-reset-gpios = <&gpio4 13 0>; + phy-reset-duration = <100>; + status = "okay"; + }; + + mac1: ethernet@800f4000 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac1_pins_a>; + status = "okay"; + }; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 3 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_gpio>; + + user1 { + label = "sd0-led"; + gpios = <&gpio2 26 0>; + linux,default-trigger = "mmc0"; + }; + + user2 { + label = "sd1-led"; + gpios = <&gpio2 24 0>; + linux,default-trigger = "mmc2"; + }; + }; + + regulators { + compatible = "simple-bus"; + + reg_3p3v: 3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_vddio_sd0: vddio-sd0 { + compatible = "regulator-fixed"; + regulator-name = "vddio-sd0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 29 0>; + }; + + reg_vddio_sd1: vddio-sd1 { + compatible = "regulator-fixed"; + regulator-name = "vddio-sd1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 19 0>; + }; + + reg_usb1_vbus: usb1_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 8 0>; + enable-active-high; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts index 0d322a2beba..8e2477fbe1d 100644 --- a/arch/arm/boot/dts/imx28-m28evk.dts +++ b/arch/arm/boot/dts/imx28-m28evk.dts @@ -10,7 +10,7 @@ */ /dts-v1/; -/include/ "imx28.dtsi" +#include "imx28.dtsi" / { model = "DENX M28EVK"; @@ -92,26 +92,26 @@ hog_pins_a: hog@0 { reg = <0>; fsl,pinmux-ids = < - 0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */ - 0x30a3 /* MX28_PAD_AUART2_CTS__GPIO_3_10 */ - 0x30b3 /* MX28_PAD_AUART2_RTS__GPIO_3_11 */ - 0x30c3 /* MX28_PAD_AUART3_RX__GPIO_3_12 */ - 0x30d3 /* MX28_PAD_AUART3_TX__GPIO_3_13 */ + MX28_PAD_PWM3__GPIO_3_28 + MX28_PAD_AUART2_CTS__GPIO_3_10 + MX28_PAD_AUART2_RTS__GPIO_3_11 + MX28_PAD_AUART3_RX__GPIO_3_12 + MX28_PAD_AUART3_TX__GPIO_3_13 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; lcdif_pins_m28: lcdif-m28@0 { reg = <0>; fsl,pinmux-ids = < - 0x11e0 /* MX28_PAD_LCD_DOTCLK__LCD_DOTCLK */ - 0x11f0 /* MX28_PAD_LCD_ENABLE__LCD_ENABLE */ + MX28_PAD_LCD_DOTCLK__LCD_DOTCLK + MX28_PAD_LCD_ENABLE__LCD_ENABLE >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; }; diff --git a/arch/arm/boot/dts/imx28-pinfunc.h b/arch/arm/boot/dts/imx28-pinfunc.h new file mode 100644 index 00000000000..e11f69ba0fe --- /dev/null +++ b/arch/arm/boot/dts/imx28-pinfunc.h @@ -0,0 +1,506 @@ +/* + * Header providing constants for i.MX28 pinctrl bindings. + * + * Copyright (C) 2013 Lothar Waßmann <LW@KARO-electronics.de> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#ifndef __DT_BINDINGS_MX28_PINCTRL_H__ +#define __DT_BINDINGS_MX28_PINCTRL_H__ + +#include "mxs-pinfunc.h" + +#define MX28_PAD_GPMI_D00__GPMI_D0 0x0000 +#define MX28_PAD_GPMI_D01__GPMI_D1 0x0010 +#define MX28_PAD_GPMI_D02__GPMI_D2 0x0020 +#define MX28_PAD_GPMI_D03__GPMI_D3 0x0030 +#define MX28_PAD_GPMI_D04__GPMI_D4 0x0040 +#define MX28_PAD_GPMI_D05__GPMI_D5 0x0050 +#define MX28_PAD_GPMI_D06__GPMI_D6 0x0060 +#define MX28_PAD_GPMI_D07__GPMI_D7 0x0070 +#define MX28_PAD_GPMI_CE0N__GPMI_CE0N 0x0100 +#define MX28_PAD_GPMI_CE1N__GPMI_CE1N 0x0110 +#define MX28_PAD_GPMI_CE2N__GPMI_CE2N 0x0120 +#define MX28_PAD_GPMI_CE3N__GPMI_CE3N 0x0130 +#define MX28_PAD_GPMI_RDY0__GPMI_READY0 0x0140 +#define MX28_PAD_GPMI_RDY1__GPMI_READY1 0x0150 +#define MX28_PAD_GPMI_RDY2__GPMI_READY2 0x0160 +#define MX28_PAD_GPMI_RDY3__GPMI_READY3 0x0170 +#define MX28_PAD_GPMI_RDN__GPMI_RDN 0x0180 +#define MX28_PAD_GPMI_WRN__GPMI_WRN 0x0190 +#define MX28_PAD_GPMI_ALE__GPMI_ALE 0x01a0 +#define MX28_PAD_GPMI_CLE__GPMI_CLE 0x01b0 +#define MX28_PAD_GPMI_RESETN__GPMI_RESETN 0x01c0 +#define MX28_PAD_LCD_D00__LCD_D0 0x1000 +#define MX28_PAD_LCD_D01__LCD_D1 0x1010 +#define MX28_PAD_LCD_D02__LCD_D2 0x1020 +#define MX28_PAD_LCD_D03__LCD_D3 0x1030 +#define MX28_PAD_LCD_D04__LCD_D4 0x1040 +#define MX28_PAD_LCD_D05__LCD_D5 0x1050 +#define MX28_PAD_LCD_D06__LCD_D6 0x1060 +#define MX28_PAD_LCD_D07__LCD_D7 0x1070 +#define MX28_PAD_LCD_D08__LCD_D8 0x1080 +#define MX28_PAD_LCD_D09__LCD_D9 0x1090 +#define MX28_PAD_LCD_D10__LCD_D10 0x10a0 +#define MX28_PAD_LCD_D11__LCD_D11 0x10b0 +#define MX28_PAD_LCD_D12__LCD_D12 0x10c0 +#define MX28_PAD_LCD_D13__LCD_D13 0x10d0 +#define MX28_PAD_LCD_D14__LCD_D14 0x10e0 +#define MX28_PAD_LCD_D15__LCD_D15 0x10f0 +#define MX28_PAD_LCD_D16__LCD_D16 0x1100 +#define MX28_PAD_LCD_D17__LCD_D17 0x1110 +#define MX28_PAD_LCD_D18__LCD_D18 0x1120 +#define MX28_PAD_LCD_D19__LCD_D19 0x1130 +#define MX28_PAD_LCD_D20__LCD_D20 0x1140 +#define MX28_PAD_LCD_D21__LCD_D21 0x1150 +#define MX28_PAD_LCD_D22__LCD_D22 0x1160 +#define MX28_PAD_LCD_D23__LCD_D23 0x1170 +#define MX28_PAD_LCD_RD_E__LCD_RD_E 0x1180 +#define MX28_PAD_LCD_WR_RWN__LCD_WR_RWN 0x1190 +#define MX28_PAD_LCD_RS__LCD_RS 0x11a0 +#define MX28_PAD_LCD_CS__LCD_CS 0x11b0 +#define MX28_PAD_LCD_VSYNC__LCD_VSYNC 0x11c0 +#define MX28_PAD_LCD_HSYNC__LCD_HSYNC 0x11d0 +#define MX28_PAD_LCD_DOTCLK__LCD_DOTCLK 0x11e0 +#define MX28_PAD_LCD_ENABLE__LCD_ENABLE 0x11f0 +#define MX28_PAD_SSP0_DATA0__SSP0_D0 0x2000 +#define MX28_PAD_SSP0_DATA1__SSP0_D1 0x2010 +#define MX28_PAD_SSP0_DATA2__SSP0_D2 0x2020 +#define MX28_PAD_SSP0_DATA3__SSP0_D3 0x2030 +#define MX28_PAD_SSP0_DATA4__SSP0_D4 0x2040 +#define MX28_PAD_SSP0_DATA5__SSP0_D5 0x2050 +#define MX28_PAD_SSP0_DATA6__SSP0_D6 0x2060 +#define MX28_PAD_SSP0_DATA7__SSP0_D7 0x2070 +#define MX28_PAD_SSP0_CMD__SSP0_CMD 0x2080 +#define MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT 0x2090 +#define MX28_PAD_SSP0_SCK__SSP0_SCK 0x20a0 +#define MX28_PAD_SSP1_SCK__SSP1_SCK 0x20c0 +#define MX28_PAD_SSP1_CMD__SSP1_CMD 0x20d0 +#define MX28_PAD_SSP1_DATA0__SSP1_D0 0x20e0 +#define MX28_PAD_SSP1_DATA3__SSP1_D3 0x20f0 +#define MX28_PAD_SSP2_SCK__SSP2_SCK 0x2100 +#define MX28_PAD_SSP2_MOSI__SSP2_CMD 0x2110 +#define MX28_PAD_SSP2_MISO__SSP2_D0 0x2120 +#define MX28_PAD_SSP2_SS0__SSP2_D3 0x2130 +#define MX28_PAD_SSP2_SS1__SSP2_D4 0x2140 +#define MX28_PAD_SSP2_SS2__SSP2_D5 0x2150 +#define MX28_PAD_SSP3_SCK__SSP3_SCK 0x2180 +#define MX28_PAD_SSP3_MOSI__SSP3_CMD 0x2190 +#define MX28_PAD_SSP3_MISO__SSP3_D0 0x21a0 +#define MX28_PAD_SSP3_SS0__SSP3_D3 0x21b0 +#define MX28_PAD_AUART0_RX__AUART0_RX 0x3000 +#define MX28_PAD_AUART0_TX__AUART0_TX 0x3010 +#define MX28_PAD_AUART0_CTS__AUART0_CTS 0x3020 +#define MX28_PAD_AUART0_RTS__AUART0_RTS 0x3030 +#define MX28_PAD_AUART1_RX__AUART1_RX 0x3040 +#define MX28_PAD_AUART1_TX__AUART1_TX 0x3050 +#define MX28_PAD_AUART1_CTS__AUART1_CTS 0x3060 +#define MX28_PAD_AUART1_RTS__AUART1_RTS 0x3070 +#define MX28_PAD_AUART2_RX__AUART2_RX 0x3080 +#define MX28_PAD_AUART2_TX__AUART2_TX 0x3090 +#define MX28_PAD_AUART2_CTS__AUART2_CTS 0x30a0 +#define MX28_PAD_AUART2_RTS__AUART2_RTS 0x30b0 +#define MX28_PAD_AUART3_RX__AUART3_RX 0x30c0 +#define MX28_PAD_AUART3_TX__AUART3_TX 0x30d0 +#define MX28_PAD_AUART3_CTS__AUART3_CTS 0x30e0 +#define MX28_PAD_AUART3_RTS__AUART3_RTS 0x30f0 +#define MX28_PAD_PWM0__PWM_0 0x3100 +#define MX28_PAD_PWM1__PWM_1 0x3110 +#define MX28_PAD_PWM2__PWM_2 0x3120 +#define MX28_PAD_SAIF0_MCLK__SAIF0_MCLK 0x3140 +#define MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK 0x3150 +#define MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK 0x3160 +#define MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 0x3170 +#define MX28_PAD_I2C0_SCL__I2C0_SCL 0x3180 +#define MX28_PAD_I2C0_SDA__I2C0_SDA 0x3190 +#define MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 0x31a0 +#define MX28_PAD_SPDIF__SPDIF_TX 0x31b0 +#define MX28_PAD_PWM3__PWM_3 0x31c0 +#define MX28_PAD_PWM4__PWM_4 0x31d0 +#define MX28_PAD_LCD_RESET__LCD_RESET 0x31e0 +#define MX28_PAD_ENET0_MDC__ENET0_MDC 0x4000 +#define MX28_PAD_ENET0_MDIO__ENET0_MDIO 0x4010 +#define MX28_PAD_ENET0_RX_EN__ENET0_RX_EN 0x4020 +#define MX28_PAD_ENET0_RXD0__ENET0_RXD0 0x4030 +#define MX28_PAD_ENET0_RXD1__ENET0_RXD1 0x4040 +#define MX28_PAD_ENET0_TX_CLK__ENET0_TX_CLK 0x4050 +#define MX28_PAD_ENET0_TX_EN__ENET0_TX_EN 0x4060 +#define MX28_PAD_ENET0_TXD0__ENET0_TXD0 0x4070 +#define MX28_PAD_ENET0_TXD1__ENET0_TXD1 0x4080 +#define MX28_PAD_ENET0_RXD2__ENET0_RXD2 0x4090 +#define MX28_PAD_ENET0_RXD3__ENET0_RXD3 0x40a0 +#define MX28_PAD_ENET0_TXD2__ENET0_TXD2 0x40b0 +#define MX28_PAD_ENET0_TXD3__ENET0_TXD3 0x40c0 +#define MX28_PAD_ENET0_RX_CLK__ENET0_RX_CLK 0x40d0 +#define MX28_PAD_ENET0_COL__ENET0_COL 0x40e0 +#define MX28_PAD_ENET0_CRS__ENET0_CRS 0x40f0 +#define MX28_PAD_ENET_CLK__CLKCTRL_ENET 0x4100 +#define MX28_PAD_JTAG_RTCK__JTAG_RTCK 0x4140 +#define MX28_PAD_EMI_D00__EMI_DATA0 0x5000 +#define MX28_PAD_EMI_D01__EMI_DATA1 0x5010 +#define MX28_PAD_EMI_D02__EMI_DATA2 0x5020 +#define MX28_PAD_EMI_D03__EMI_DATA3 0x5030 +#define MX28_PAD_EMI_D04__EMI_DATA4 0x5040 +#define MX28_PAD_EMI_D05__EMI_DATA5 0x5050 +#define MX28_PAD_EMI_D06__EMI_DATA6 0x5060 +#define MX28_PAD_EMI_D07__EMI_DATA7 0x5070 +#define MX28_PAD_EMI_D08__EMI_DATA8 0x5080 +#define MX28_PAD_EMI_D09__EMI_DATA9 0x5090 +#define MX28_PAD_EMI_D10__EMI_DATA10 0x50a0 +#define MX28_PAD_EMI_D11__EMI_DATA11 0x50b0 +#define MX28_PAD_EMI_D12__EMI_DATA12 0x50c0 +#define MX28_PAD_EMI_D13__EMI_DATA13 0x50d0 +#define MX28_PAD_EMI_D14__EMI_DATA14 0x50e0 +#define MX28_PAD_EMI_D15__EMI_DATA15 0x50f0 +#define MX28_PAD_EMI_ODT0__EMI_ODT0 0x5100 +#define MX28_PAD_EMI_DQM0__EMI_DQM0 0x5110 +#define MX28_PAD_EMI_ODT1__EMI_ODT1 0x5120 +#define MX28_PAD_EMI_DQM1__EMI_DQM1 0x5130 +#define MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK 0x5140 +#define MX28_PAD_EMI_CLK__EMI_CLK 0x5150 +#define MX28_PAD_EMI_DQS0__EMI_DQS0 0x5160 +#define MX28_PAD_EMI_DQS1__EMI_DQS1 0x5170 +#define MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN 0x51a0 +#define MX28_PAD_EMI_A00__EMI_ADDR0 0x6000 +#define MX28_PAD_EMI_A01__EMI_ADDR1 0x6010 +#define MX28_PAD_EMI_A02__EMI_ADDR2 0x6020 +#define MX28_PAD_EMI_A03__EMI_ADDR3 0x6030 +#define MX28_PAD_EMI_A04__EMI_ADDR4 0x6040 +#define MX28_PAD_EMI_A05__EMI_ADDR5 0x6050 +#define MX28_PAD_EMI_A06__EMI_ADDR6 0x6060 +#define MX28_PAD_EMI_A07__EMI_ADDR7 0x6070 +#define MX28_PAD_EMI_A08__EMI_ADDR8 0x6080 +#define MX28_PAD_EMI_A09__EMI_ADDR9 0x6090 +#define MX28_PAD_EMI_A10__EMI_ADDR10 0x60a0 +#define MX28_PAD_EMI_A11__EMI_ADDR11 0x60b0 +#define MX28_PAD_EMI_A12__EMI_ADDR12 0x60c0 +#define MX28_PAD_EMI_A13__EMI_ADDR13 0x60d0 +#define MX28_PAD_EMI_A14__EMI_ADDR14 0x60e0 +#define MX28_PAD_EMI_BA0__EMI_BA0 0x6100 +#define MX28_PAD_EMI_BA1__EMI_BA1 0x6110 +#define MX28_PAD_EMI_BA2__EMI_BA2 0x6120 +#define MX28_PAD_EMI_CASN__EMI_CASN 0x6130 +#define MX28_PAD_EMI_RASN__EMI_RASN 0x6140 +#define MX28_PAD_EMI_WEN__EMI_WEN 0x6150 +#define MX28_PAD_EMI_CE0N__EMI_CE0N 0x6160 +#define MX28_PAD_EMI_CE1N__EMI_CE1N 0x6170 +#define MX28_PAD_EMI_CKE__EMI_CKE 0x6180 +#define MX28_PAD_GPMI_D00__SSP1_D0 0x0001 +#define MX28_PAD_GPMI_D01__SSP1_D1 0x0011 +#define MX28_PAD_GPMI_D02__SSP1_D2 0x0021 +#define MX28_PAD_GPMI_D03__SSP1_D3 0x0031 +#define MX28_PAD_GPMI_D04__SSP1_D4 0x0041 +#define MX28_PAD_GPMI_D05__SSP1_D5 0x0051 +#define MX28_PAD_GPMI_D06__SSP1_D6 0x0061 +#define MX28_PAD_GPMI_D07__SSP1_D7 0x0071 +#define MX28_PAD_GPMI_CE0N__SSP3_D0 0x0101 +#define MX28_PAD_GPMI_CE1N__SSP3_D3 0x0111 +#define MX28_PAD_GPMI_CE2N__CAN1_TX 0x0121 +#define MX28_PAD_GPMI_CE3N__CAN1_RX 0x0131 +#define MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT 0x0141 +#define MX28_PAD_GPMI_RDY1__SSP1_CMD 0x0151 +#define MX28_PAD_GPMI_RDY2__CAN0_TX 0x0161 +#define MX28_PAD_GPMI_RDY3__CAN0_RX 0x0171 +#define MX28_PAD_GPMI_RDN__SSP3_SCK 0x0181 +#define MX28_PAD_GPMI_WRN__SSP1_SCK 0x0191 +#define MX28_PAD_GPMI_ALE__SSP3_D1 0x01a1 +#define MX28_PAD_GPMI_CLE__SSP3_D2 0x01b1 +#define MX28_PAD_GPMI_RESETN__SSP3_CMD 0x01c1 +#define MX28_PAD_LCD_D03__ETM_DA8 0x1031 +#define MX28_PAD_LCD_D04__ETM_DA9 0x1041 +#define MX28_PAD_LCD_D08__ETM_DA3 0x1081 +#define MX28_PAD_LCD_D09__ETM_DA4 0x1091 +#define MX28_PAD_LCD_D20__ENET1_1588_EVENT2_OUT 0x1141 +#define MX28_PAD_LCD_D21__ENET1_1588_EVENT2_IN 0x1151 +#define MX28_PAD_LCD_D22__ENET1_1588_EVENT3_OUT 0x1161 +#define MX28_PAD_LCD_D23__ENET1_1588_EVENT3_IN 0x1171 +#define MX28_PAD_LCD_RD_E__LCD_VSYNC 0x1181 +#define MX28_PAD_LCD_WR_RWN__LCD_HSYNC 0x1191 +#define MX28_PAD_LCD_RS__LCD_DOTCLK 0x11a1 +#define MX28_PAD_LCD_CS__LCD_ENABLE 0x11b1 +#define MX28_PAD_LCD_VSYNC__SAIF1_SDATA0 0x11c1 +#define MX28_PAD_LCD_HSYNC__SAIF1_SDATA1 0x11d1 +#define MX28_PAD_LCD_DOTCLK__SAIF1_MCLK 0x11e1 +#define MX28_PAD_SSP0_DATA4__SSP2_D0 0x2041 +#define MX28_PAD_SSP0_DATA5__SSP2_D3 0x2051 +#define MX28_PAD_SSP0_DATA6__SSP2_CMD 0x2061 +#define MX28_PAD_SSP0_DATA7__SSP2_SCK 0x2071 +#define MX28_PAD_SSP1_SCK__SSP2_D1 0x20c1 +#define MX28_PAD_SSP1_CMD__SSP2_D2 0x20d1 +#define MX28_PAD_SSP1_DATA0__SSP2_D6 0x20e1 +#define MX28_PAD_SSP1_DATA3__SSP2_D7 0x20f1 +#define MX28_PAD_SSP2_SCK__AUART2_RX 0x2101 +#define MX28_PAD_SSP2_MOSI__AUART2_TX 0x2111 +#define MX28_PAD_SSP2_MISO__AUART3_RX 0x2121 +#define MX28_PAD_SSP2_SS0__AUART3_TX 0x2131 +#define MX28_PAD_SSP2_SS1__SSP2_D1 0x2141 +#define MX28_PAD_SSP2_SS2__SSP2_D2 0x2151 +#define MX28_PAD_SSP3_SCK__AUART4_TX 0x2181 +#define MX28_PAD_SSP3_MOSI__AUART4_RX 0x2191 +#define MX28_PAD_SSP3_MISO__AUART4_RTS 0x21a1 +#define MX28_PAD_SSP3_SS0__AUART4_CTS 0x21b1 +#define MX28_PAD_AUART0_RX__I2C0_SCL 0x3001 +#define MX28_PAD_AUART0_TX__I2C0_SDA 0x3011 +#define MX28_PAD_AUART0_CTS__AUART4_RX 0x3021 +#define MX28_PAD_AUART0_RTS__AUART4_TX 0x3031 +#define MX28_PAD_AUART1_RX__SSP2_CARD_DETECT 0x3041 +#define MX28_PAD_AUART1_TX__SSP3_CARD_DETECT 0x3051 +#define MX28_PAD_AUART1_CTS__USB0_OVERCURRENT 0x3061 +#define MX28_PAD_AUART1_RTS__USB0_ID 0x3071 +#define MX28_PAD_AUART2_RX__SSP3_D1 0x3081 +#define MX28_PAD_AUART2_TX__SSP3_D2 0x3091 +#define MX28_PAD_AUART2_CTS__I2C1_SCL 0x30a1 +#define MX28_PAD_AUART2_RTS__I2C1_SDA 0x30b1 +#define MX28_PAD_AUART3_RX__CAN0_TX 0x30c1 +#define MX28_PAD_AUART3_TX__CAN0_RX 0x30d1 +#define MX28_PAD_AUART3_CTS__CAN1_TX 0x30e1 +#define MX28_PAD_AUART3_RTS__CAN1_RX 0x30f1 +#define MX28_PAD_PWM0__I2C1_SCL 0x3101 +#define MX28_PAD_PWM1__I2C1_SDA 0x3111 +#define MX28_PAD_PWM2__USB0_ID 0x3121 +#define MX28_PAD_SAIF0_MCLK__PWM_3 0x3141 +#define MX28_PAD_SAIF0_LRCLK__PWM_4 0x3151 +#define MX28_PAD_SAIF0_BITCLK__PWM_5 0x3161 +#define MX28_PAD_SAIF0_SDATA0__PWM_6 0x3171 +#define MX28_PAD_I2C0_SCL__TIMROT_ROTARYA 0x3181 +#define MX28_PAD_I2C0_SDA__TIMROT_ROTARYB 0x3191 +#define MX28_PAD_SAIF1_SDATA0__PWM_7 0x31a1 +#define MX28_PAD_LCD_RESET__LCD_VSYNC 0x31e1 +#define MX28_PAD_ENET0_MDC__GPMI_CE4N 0x4001 +#define MX28_PAD_ENET0_MDIO__GPMI_CE5N 0x4011 +#define MX28_PAD_ENET0_RX_EN__GPMI_CE6N 0x4021 +#define MX28_PAD_ENET0_RXD0__GPMI_CE7N 0x4031 +#define MX28_PAD_ENET0_RXD1__GPMI_READY4 0x4041 +#define MX28_PAD_ENET0_TX_CLK__HSADC_TRIGGER 0x4051 +#define MX28_PAD_ENET0_TX_EN__GPMI_READY5 0x4061 +#define MX28_PAD_ENET0_TXD0__GPMI_READY6 0x4071 +#define MX28_PAD_ENET0_TXD1__GPMI_READY7 0x4081 +#define MX28_PAD_ENET0_RXD2__ENET1_RXD0 0x4091 +#define MX28_PAD_ENET0_RXD3__ENET1_RXD1 0x40a1 +#define MX28_PAD_ENET0_TXD2__ENET1_TXD0 0x40b1 +#define MX28_PAD_ENET0_TXD3__ENET1_TXD1 0x40c1 +#define MX28_PAD_ENET0_RX_CLK__ENET0_RX_ER 0x40d1 +#define MX28_PAD_ENET0_COL__ENET1_TX_EN 0x40e1 +#define MX28_PAD_ENET0_CRS__ENET1_RX_EN 0x40f1 +#define MX28_PAD_GPMI_CE2N__ENET0_RX_ER 0x0122 +#define MX28_PAD_GPMI_CE3N__SAIF1_MCLK 0x0132 +#define MX28_PAD_GPMI_RDY0__USB0_ID 0x0142 +#define MX28_PAD_GPMI_RDY2__ENET0_TX_ER 0x0162 +#define MX28_PAD_GPMI_RDY3__HSADC_TRIGGER 0x0172 +#define MX28_PAD_GPMI_ALE__SSP3_D4 0x01a2 +#define MX28_PAD_GPMI_CLE__SSP3_D5 0x01b2 +#define MX28_PAD_LCD_D00__ETM_DA0 0x1002 +#define MX28_PAD_LCD_D01__ETM_DA1 0x1012 +#define MX28_PAD_LCD_D02__ETM_DA2 0x1022 +#define MX28_PAD_LCD_D03__ETM_DA3 0x1032 +#define MX28_PAD_LCD_D04__ETM_DA4 0x1042 +#define MX28_PAD_LCD_D05__ETM_DA5 0x1052 +#define MX28_PAD_LCD_D06__ETM_DA6 0x1062 +#define MX28_PAD_LCD_D07__ETM_DA7 0x1072 +#define MX28_PAD_LCD_D08__ETM_DA8 0x1082 +#define MX28_PAD_LCD_D09__ETM_DA9 0x1092 +#define MX28_PAD_LCD_D10__ETM_DA10 0x10a2 +#define MX28_PAD_LCD_D11__ETM_DA11 0x10b2 +#define MX28_PAD_LCD_D12__ETM_DA12 0x10c2 +#define MX28_PAD_LCD_D13__ETM_DA13 0x10d2 +#define MX28_PAD_LCD_D14__ETM_DA14 0x10e2 +#define MX28_PAD_LCD_D15__ETM_DA15 0x10f2 +#define MX28_PAD_LCD_D16__ETM_DA7 0x1102 +#define MX28_PAD_LCD_D17__ETM_DA6 0x1112 +#define MX28_PAD_LCD_D18__ETM_DA5 0x1122 +#define MX28_PAD_LCD_D19__ETM_DA4 0x1132 +#define MX28_PAD_LCD_D20__ETM_DA3 0x1142 +#define MX28_PAD_LCD_D21__ETM_DA2 0x1152 +#define MX28_PAD_LCD_D22__ETM_DA1 0x1162 +#define MX28_PAD_LCD_D23__ETM_DA0 0x1172 +#define MX28_PAD_LCD_RD_E__ETM_TCTL 0x1182 +#define MX28_PAD_LCD_WR_RWN__ETM_TCLK 0x1192 +#define MX28_PAD_LCD_HSYNC__ETM_TCTL 0x11d2 +#define MX28_PAD_LCD_DOTCLK__ETM_TCLK 0x11e2 +#define MX28_PAD_SSP1_SCK__ENET0_1588_EVENT2_OUT 0x20c2 +#define MX28_PAD_SSP1_CMD__ENET0_1588_EVENT2_IN 0x20d2 +#define MX28_PAD_SSP1_DATA0__ENET0_1588_EVENT3_OUT 0x20e2 +#define MX28_PAD_SSP1_DATA3__ENET0_1588_EVENT3_IN 0x20f2 +#define MX28_PAD_SSP2_SCK__SAIF0_SDATA1 0x2102 +#define MX28_PAD_SSP2_MOSI__SAIF0_SDATA2 0x2112 +#define MX28_PAD_SSP2_MISO__SAIF1_SDATA1 0x2122 +#define MX28_PAD_SSP2_SS0__SAIF1_SDATA2 0x2132 +#define MX28_PAD_SSP2_SS1__USB1_OVERCURRENT 0x2142 +#define MX28_PAD_SSP2_SS2__USB0_OVERCURRENT 0x2152 +#define MX28_PAD_SSP3_SCK__ENET1_1588_EVENT0_OUT 0x2182 +#define MX28_PAD_SSP3_MOSI__ENET1_1588_EVENT0_IN 0x2192 +#define MX28_PAD_SSP3_MISO__ENET1_1588_EVENT1_OUT 0x21a2 +#define MX28_PAD_SSP3_SS0__ENET1_1588_EVENT1_IN 0x21b2 +#define MX28_PAD_AUART0_RX__DUART_CTS 0x3002 +#define MX28_PAD_AUART0_TX__DUART_RTS 0x3012 +#define MX28_PAD_AUART0_CTS__DUART_RX 0x3022 +#define MX28_PAD_AUART0_RTS__DUART_TX 0x3032 +#define MX28_PAD_AUART1_RX__PWM_0 0x3042 +#define MX28_PAD_AUART1_TX__PWM_1 0x3052 +#define MX28_PAD_AUART1_CTS__TIMROT_ROTARYA 0x3062 +#define MX28_PAD_AUART1_RTS__TIMROT_ROTARYB 0x3072 +#define MX28_PAD_AUART2_RX__SSP3_D4 0x3082 +#define MX28_PAD_AUART2_TX__SSP3_D5 0x3092 +#define MX28_PAD_AUART2_CTS__SAIF1_BITCLK 0x30a2 +#define MX28_PAD_AUART2_RTS__SAIF1_LRCLK 0x30b2 +#define MX28_PAD_AUART3_RX__ENET0_1588_EVENT0_OUT 0x30c2 +#define MX28_PAD_AUART3_TX__ENET0_1588_EVENT0_IN 0x30d2 +#define MX28_PAD_AUART3_CTS__ENET0_1588_EVENT1_OUT 0x30e2 +#define MX28_PAD_AUART3_RTS__ENET0_1588_EVENT1_IN 0x30f2 +#define MX28_PAD_PWM0__DUART_RX 0x3102 +#define MX28_PAD_PWM1__DUART_TX 0x3112 +#define MX28_PAD_PWM2__USB1_OVERCURRENT 0x3122 +#define MX28_PAD_SAIF0_MCLK__AUART4_CTS 0x3142 +#define MX28_PAD_SAIF0_LRCLK__AUART4_RTS 0x3152 +#define MX28_PAD_SAIF0_BITCLK__AUART4_RX 0x3162 +#define MX28_PAD_SAIF0_SDATA0__AUART4_TX 0x3172 +#define MX28_PAD_I2C0_SCL__DUART_RX 0x3182 +#define MX28_PAD_I2C0_SDA__DUART_TX 0x3192 +#define MX28_PAD_SAIF1_SDATA0__SAIF0_SDATA1 0x31a2 +#define MX28_PAD_SPDIF__ENET1_RX_ER 0x31b2 +#define MX28_PAD_ENET0_MDC__SAIF0_SDATA1 0x4002 +#define MX28_PAD_ENET0_MDIO__SAIF0_SDATA2 0x4012 +#define MX28_PAD_ENET0_RX_EN__SAIF1_SDATA1 0x4022 +#define MX28_PAD_ENET0_RXD0__SAIF1_SDATA2 0x4032 +#define MX28_PAD_ENET0_TX_CLK__ENET0_1588_EVENT2_OUT 0x4052 +#define MX28_PAD_ENET0_RXD2__ENET0_1588_EVENT0_OUT 0x4092 +#define MX28_PAD_ENET0_RXD3__ENET0_1588_EVENT0_IN 0x40a2 +#define MX28_PAD_ENET0_TXD2__ENET0_1588_EVENT1_OUT 0x40b2 +#define MX28_PAD_ENET0_TXD3__ENET0_1588_EVENT1_IN 0x40c2 +#define MX28_PAD_ENET0_RX_CLK__ENET0_1588_EVENT2_IN 0x40d2 +#define MX28_PAD_ENET0_COL__ENET0_1588_EVENT3_OUT 0x40e2 +#define MX28_PAD_ENET0_CRS__ENET0_1588_EVENT3_IN 0x40f2 +#define MX28_PAD_GPMI_D00__GPIO_0_0 0x0003 +#define MX28_PAD_GPMI_D01__GPIO_0_1 0x0013 +#define MX28_PAD_GPMI_D02__GPIO_0_2 0x0023 +#define MX28_PAD_GPMI_D03__GPIO_0_3 0x0033 +#define MX28_PAD_GPMI_D04__GPIO_0_4 0x0043 +#define MX28_PAD_GPMI_D05__GPIO_0_5 0x0053 +#define MX28_PAD_GPMI_D06__GPIO_0_6 0x0063 +#define MX28_PAD_GPMI_D07__GPIO_0_7 0x0073 +#define MX28_PAD_GPMI_CE0N__GPIO_0_16 0x0103 +#define MX28_PAD_GPMI_CE1N__GPIO_0_17 0x0113 +#define MX28_PAD_GPMI_CE2N__GPIO_0_18 0x0123 +#define MX28_PAD_GPMI_CE3N__GPIO_0_19 0x0133 +#define MX28_PAD_GPMI_RDY0__GPIO_0_20 0x0143 +#define MX28_PAD_GPMI_RDY1__GPIO_0_21 0x0153 +#define MX28_PAD_GPMI_RDY2__GPIO_0_22 0x0163 +#define MX28_PAD_GPMI_RDY3__GPIO_0_23 0x0173 +#define MX28_PAD_GPMI_RDN__GPIO_0_24 0x0183 +#define MX28_PAD_GPMI_WRN__GPIO_0_25 0x0193 +#define MX28_PAD_GPMI_ALE__GPIO_0_26 0x01a3 +#define MX28_PAD_GPMI_CLE__GPIO_0_27 0x01b3 +#define MX28_PAD_GPMI_RESETN__GPIO_0_28 0x01c3 +#define MX28_PAD_LCD_D00__GPIO_1_0 0x1003 +#define MX28_PAD_LCD_D01__GPIO_1_1 0x1013 +#define MX28_PAD_LCD_D02__GPIO_1_2 0x1023 +#define MX28_PAD_LCD_D03__GPIO_1_3 0x1033 +#define MX28_PAD_LCD_D04__GPIO_1_4 0x1043 +#define MX28_PAD_LCD_D05__GPIO_1_5 0x1053 +#define MX28_PAD_LCD_D06__GPIO_1_6 0x1063 +#define MX28_PAD_LCD_D07__GPIO_1_7 0x1073 +#define MX28_PAD_LCD_D08__GPIO_1_8 0x1083 +#define MX28_PAD_LCD_D09__GPIO_1_9 0x1093 +#define MX28_PAD_LCD_D10__GPIO_1_10 0x10a3 +#define MX28_PAD_LCD_D11__GPIO_1_11 0x10b3 +#define MX28_PAD_LCD_D12__GPIO_1_12 0x10c3 +#define MX28_PAD_LCD_D13__GPIO_1_13 0x10d3 +#define MX28_PAD_LCD_D14__GPIO_1_14 0x10e3 +#define MX28_PAD_LCD_D15__GPIO_1_15 0x10f3 +#define MX28_PAD_LCD_D16__GPIO_1_16 0x1103 +#define MX28_PAD_LCD_D17__GPIO_1_17 0x1113 +#define MX28_PAD_LCD_D18__GPIO_1_18 0x1123 +#define MX28_PAD_LCD_D19__GPIO_1_19 0x1133 +#define MX28_PAD_LCD_D20__GPIO_1_20 0x1143 +#define MX28_PAD_LCD_D21__GPIO_1_21 0x1153 +#define MX28_PAD_LCD_D22__GPIO_1_22 0x1163 +#define MX28_PAD_LCD_D23__GPIO_1_23 0x1173 +#define MX28_PAD_LCD_RD_E__GPIO_1_24 0x1183 +#define MX28_PAD_LCD_WR_RWN__GPIO_1_25 0x1193 +#define MX28_PAD_LCD_RS__GPIO_1_26 0x11a3 +#define MX28_PAD_LCD_CS__GPIO_1_27 0x11b3 +#define MX28_PAD_LCD_VSYNC__GPIO_1_28 0x11c3 +#define MX28_PAD_LCD_HSYNC__GPIO_1_29 0x11d3 +#define MX28_PAD_LCD_DOTCLK__GPIO_1_30 0x11e3 +#define MX28_PAD_LCD_ENABLE__GPIO_1_31 0x11f3 +#define MX28_PAD_SSP0_DATA0__GPIO_2_0 0x2003 +#define MX28_PAD_SSP0_DATA1__GPIO_2_1 0x2013 +#define MX28_PAD_SSP0_DATA2__GPIO_2_2 0x2023 +#define MX28_PAD_SSP0_DATA3__GPIO_2_3 0x2033 +#define MX28_PAD_SSP0_DATA4__GPIO_2_4 0x2043 +#define MX28_PAD_SSP0_DATA5__GPIO_2_5 0x2053 +#define MX28_PAD_SSP0_DATA6__GPIO_2_6 0x2063 +#define MX28_PAD_SSP0_DATA7__GPIO_2_7 0x2073 +#define MX28_PAD_SSP0_CMD__GPIO_2_8 0x2083 +#define MX28_PAD_SSP0_DETECT__GPIO_2_9 0x2093 +#define MX28_PAD_SSP0_SCK__GPIO_2_10 0x20a3 +#define MX28_PAD_SSP1_SCK__GPIO_2_12 0x20c3 +#define MX28_PAD_SSP1_CMD__GPIO_2_13 0x20d3 +#define MX28_PAD_SSP1_DATA0__GPIO_2_14 0x20e3 +#define MX28_PAD_SSP1_DATA3__GPIO_2_15 0x20f3 +#define MX28_PAD_SSP2_SCK__GPIO_2_16 0x2103 +#define MX28_PAD_SSP2_MOSI__GPIO_2_17 0x2113 +#define MX28_PAD_SSP2_MISO__GPIO_2_18 0x2123 +#define MX28_PAD_SSP2_SS0__GPIO_2_19 0x2133 +#define MX28_PAD_SSP2_SS1__GPIO_2_20 0x2143 +#define MX28_PAD_SSP2_SS2__GPIO_2_21 0x2153 +#define MX28_PAD_SSP3_SCK__GPIO_2_24 0x2183 +#define MX28_PAD_SSP3_MOSI__GPIO_2_25 0x2193 +#define MX28_PAD_SSP3_MISO__GPIO_2_26 0x21a3 +#define MX28_PAD_SSP3_SS0__GPIO_2_27 0x21b3 +#define MX28_PAD_AUART0_RX__GPIO_3_0 0x3003 +#define MX28_PAD_AUART0_TX__GPIO_3_1 0x3013 +#define MX28_PAD_AUART0_CTS__GPIO_3_2 0x3023 +#define MX28_PAD_AUART0_RTS__GPIO_3_3 0x3033 +#define MX28_PAD_AUART1_RX__GPIO_3_4 0x3043 +#define MX28_PAD_AUART1_TX__GPIO_3_5 0x3053 +#define MX28_PAD_AUART1_CTS__GPIO_3_6 0x3063 +#define MX28_PAD_AUART1_RTS__GPIO_3_7 0x3073 +#define MX28_PAD_AUART2_RX__GPIO_3_8 0x3083 +#define MX28_PAD_AUART2_TX__GPIO_3_9 0x3093 +#define MX28_PAD_AUART2_CTS__GPIO_3_10 0x30a3 +#define MX28_PAD_AUART2_RTS__GPIO_3_11 0x30b3 +#define MX28_PAD_AUART3_RX__GPIO_3_12 0x30c3 +#define MX28_PAD_AUART3_TX__GPIO_3_13 0x30d3 +#define MX28_PAD_AUART3_CTS__GPIO_3_14 0x30e3 +#define MX28_PAD_AUART3_RTS__GPIO_3_15 0x30f3 +#define MX28_PAD_PWM0__GPIO_3_16 0x3103 +#define MX28_PAD_PWM1__GPIO_3_17 0x3113 +#define MX28_PAD_PWM2__GPIO_3_18 0x3123 +#define MX28_PAD_SAIF0_MCLK__GPIO_3_20 0x3143 +#define MX28_PAD_SAIF0_LRCLK__GPIO_3_21 0x3153 +#define MX28_PAD_SAIF0_BITCLK__GPIO_3_22 0x3163 +#define MX28_PAD_SAIF0_SDATA0__GPIO_3_23 0x3173 +#define MX28_PAD_I2C0_SCL__GPIO_3_24 0x3183 +#define MX28_PAD_I2C0_SDA__GPIO_3_25 0x3193 +#define MX28_PAD_SAIF1_SDATA0__GPIO_3_26 0x31a3 +#define MX28_PAD_SPDIF__GPIO_3_27 0x31b3 +#define MX28_PAD_PWM3__GPIO_3_28 0x31c3 +#define MX28_PAD_PWM4__GPIO_3_29 0x31d3 +#define MX28_PAD_LCD_RESET__GPIO_3_30 0x31e3 +#define MX28_PAD_ENET0_MDC__GPIO_4_0 0x4003 +#define MX28_PAD_ENET0_MDIO__GPIO_4_1 0x4013 +#define MX28_PAD_ENET0_RX_EN__GPIO_4_2 0x4023 +#define MX28_PAD_ENET0_RXD0__GPIO_4_3 0x4033 +#define MX28_PAD_ENET0_RXD1__GPIO_4_4 0x4043 +#define MX28_PAD_ENET0_TX_CLK__GPIO_4_5 0x4053 +#define MX28_PAD_ENET0_TX_EN__GPIO_4_6 0x4063 +#define MX28_PAD_ENET0_TXD0__GPIO_4_7 0x4073 +#define MX28_PAD_ENET0_TXD1__GPIO_4_8 0x4083 +#define MX28_PAD_ENET0_RXD2__GPIO_4_9 0x4093 +#define MX28_PAD_ENET0_RXD3__GPIO_4_10 0x40a3 +#define MX28_PAD_ENET0_TXD2__GPIO_4_11 0x40b3 +#define MX28_PAD_ENET0_TXD3__GPIO_4_12 0x40c3 +#define MX28_PAD_ENET0_RX_CLK__GPIO_4_13 0x40d3 +#define MX28_PAD_ENET0_COL__GPIO_4_14 0x40e3 +#define MX28_PAD_ENET0_CRS__GPIO_4_15 0x40f3 +#define MX28_PAD_ENET_CLK__GPIO_4_16 0x4103 +#define MX28_PAD_JTAG_RTCK__GPIO_4_20 0x4143 + +#endif /* __DT_BINDINGS_MX28_PINCTRL_H__ */ diff --git a/arch/arm/boot/dts/imx28-sps1.dts b/arch/arm/boot/dts/imx28-sps1.dts index 6c6a5442800..4870f07bf56 100644 --- a/arch/arm/boot/dts/imx28-sps1.dts +++ b/arch/arm/boot/dts/imx28-sps1.dts @@ -10,7 +10,7 @@ */ /dts-v1/; -/include/ "imx28.dtsi" +#include "imx28.dtsi" / { model = "SchulerControl GmbH, SC SPS 1"; @@ -29,13 +29,13 @@ hog_pins_a: hog-gpios@0 { reg = <0>; fsl,pinmux-ids = < - 0x0003 /* MX28_PAD_GPMI_D00__GPIO_0_0 */ - 0x0033 /* MX28_PAD_GPMI_D03__GPIO_0_3 */ - 0x0063 /* MX28_PAD_GPMI_D06__GPIO_0_6 */ + MX28_PAD_GPMI_D00__GPIO_0_0 + MX28_PAD_GPMI_D03__GPIO_0_3 + MX28_PAD_GPMI_D06__GPIO_0_6 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; }; diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts index 37be532f005..be5a0550d58 100644 --- a/arch/arm/boot/dts/imx28-tx28.dts +++ b/arch/arm/boot/dts/imx28-tx28.dts @@ -1,106 +1,139 @@ +/* + * Copyright 2012 Shawn Guo <shawn.guo@linaro.org> + * Copyright 2013 Lothar Waßmann <LW@KARO-electronics.de> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + /dts-v1/; -/include/ "imx28.dtsi" +#include "imx28.dtsi" +#include <dt-bindings/gpio/gpio.h> / { model = "Ka-Ro electronics TX28 module"; compatible = "karo,tx28", "fsl,imx28"; + aliases { + can0 = &can0; + can1 = &can1; + display = &display; + ds1339 = &ds1339; + gpio5 = &gpio5; + lcdif = &lcdif; + lcdif_23bit_pins = &tx28_lcdif_23bit_pins; + lcdif_24bit_pins = &lcdif_24bit_pins_a; + stk5led = &user_led; + usbotg = &usb0; + }; + memory { - reg = <0x40000000 0x08000000>; - }; - - apb@80000000 { - apbh@80000000 { - ssp0: ssp@80010000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_4bit_pins_a - &mmc0_cd_cfg - &mmc0_sck_cfg>; - bus-width = <4>; - status = "okay"; - }; + reg = <0 0>; /* will be filled in by U-Boot */ + }; - pinctrl@80018000 { - pinctrl-names = "default"; - pinctrl-0 = <&hog_pins_a>; - - hog_pins_a: hog@0 { - reg = <0>; - fsl,pinmux-ids = < - 0x40a3 /* MX28_PAD_ENET0_RXD3__GPIO_4_10 */ - >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; - }; - - mac0_pins_gpio: mac0-gpio-mode@0 { - reg = <0>; - fsl,pinmux-ids = < - 0x4003 /* MX28_PAD_ENET0_MDC__GPIO_4_0 */ - 0x4013 /* MX28_PAD_ENET0_MDIO__GPIO_4_1 */ - 0x4023 /* MX28_PAD_ENET0_RX_EN__GPIO_4_2 */ - 0x4033 /* MX28_PAD_ENET0_RXD0__GPIO_4_3 */ - 0x4043 /* MX28_PAD_ENET0_RXD1__GPIO_4_4 */ - 0x4063 /* MX28_PAD_ENET0_TX_EN__GPIO_4_6 */ - 0x4073 /* MX28_PAD_ENET0_TXD0__GPIO_4_7 */ - 0x4083 /* MX28_PAD_ENET0_TXD1__GPIO_4_8 */ - 0x4103 /* MX28_PAD_ENET_CLK__GPIO_4_16 */ - >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; - }; - }; + onewire { + compatible = "w1-gpio"; + gpios = <&gpio2 7 0>; + status = "disabled"; + }; + + regulators { + compatible = "simple-bus"; + + reg_usb0_vbus: usb0_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb0_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio0 18 0>; + enable-active-high; }; - apbx@80040000 { - i2c0: i2c@80058000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; + reg_usb1_vbus: usb1_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 27 0>; + enable-active-high; + }; - ds1339: rtc@68 { - compatible = "mxim,ds1339"; - reg = <0x68>; - }; - }; + reg_2p5v: 2p5v { + compatible = "regulator-fixed"; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; - pwm: pwm@80064000 { - pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pins_a>; - status = "okay"; - }; + reg_3p3v: 3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; - duart: serial@80074000 { - pinctrl-names = "default"; - pinctrl-0 = <&duart_4pins_a>; - status = "okay"; - }; + reg_can_xcvr: can-xcvr { + compatible = "regulator-fixed"; + regulator-name = "CAN XCVR"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 0 0>; + enable-active-low; + pinctrl-names = "default"; + pinctrl-0 = <&tx28_flexcan_xcvr_pins>; + }; - auart1: serial@8006c000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart1_pins_a>; - status = "okay"; - }; + reg_lcd: lcd-power { + compatible = "regulator-fixed"; + regulator-name = "LCD POWER"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 31 0>; + enable-active-high; + }; + + reg_lcd_reset: lcd-reset { + compatible = "regulator-fixed"; + regulator-name = "LCD RESET"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 30 0>; + startup-delay-us = <300000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; }; }; - ahb@80080000 { - mac0: ethernet@800f0000 { - phy-mode = "rmii"; - pinctrl-names = "default", "gpio_mode"; - pinctrl-0 = <&mac0_pins_a>; - pinctrl-1 = <&mac0_pins_gpio>; - status = "okay"; + clocks { + #address-cells = <1>; + #size-cells = <0>; + mclk: clock@0 { + compatible = "fixed-clock"; + reg = <0>; + #clock-cells = <0>; + clock-frequency = <27000000>; }; }; + sound { + compatible = "fsl,imx28-tx28-sgtl5000", + "fsl,mxs-audio-sgtl5000"; + model = "imx28-tx28-sgtl5000"; + saif-controllers = <&saif0 &saif1>; + audio-codec = <&sgtl5000>; + }; + leds { compatible = "gpio-leds"; - user { + user_led: user { label = "Heartbeat"; gpios = <&gpio4 10 0>; linux,default-trigger = "heartbeat"; @@ -109,8 +142,512 @@ backlight { compatible = "pwm-backlight"; - pwms = <&pwm 0 5000000>; - brightness-levels = <0 4 8 16 32 64 128 255>; - default-brightness-level = <6>; + pwms = <&pwm 0 500000>; + /* + * a silly way to create a 1:1 relationship between the + * PWM value and the actual duty cycle + */ + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100>; + default-brightness-level = <50>; + }; + + matrix_keypad: matrix-keypad@0 { + compatible = "gpio-matrix-keypad"; + col-gpios = < + &gpio5 0 0 + &gpio5 1 0 + &gpio5 2 0 + &gpio5 3 0 + >; + row-gpios = < + &gpio5 4 0 + &gpio5 5 0 + &gpio5 6 0 + &gpio5 7 0 + >; + /* sample keymap */ + linux,keymap = < + 0x00000074 /* row 0, col 0, KEY_POWER */ + 0x00010052 /* row 0, col 1, KEY_KP0 */ + 0x0002004f /* row 0, col 2, KEY_KP1 */ + 0x00030050 /* row 0, col 3, KEY_KP2 */ + 0x01000051 /* row 1, col 0, KEY_KP3 */ + 0x0101004b /* row 1, col 1, KEY_KP4 */ + 0x0102004c /* row 1, col 2, KEY_KP5 */ + 0x0103004d /* row 1, col 3, KEY_KP6 */ + 0x02000047 /* row 2, col 0, KEY_KP7 */ + 0x02010048 /* row 2, col 1, KEY_KP8 */ + 0x02020049 /* row 2, col 2, KEY_KP9 */ + >; + gpio-activelow; + linux,wakeup; + debounce-delay-ms = <100>; + col-scan-delay-us = <5000>; + linux,no-autorepeat; + }; +}; + +/* 2nd TX-Std UART - (A)UART1 */ +&auart1 { + pinctrl-names = "default"; + pinctrl-0 = <&auart1_pins_a>; + status = "okay"; +}; + +/* 3rd TX-Std UART - (A)UART3 */ +&auart3 { + pinctrl-names = "default"; + pinctrl-0 = <&auart3_pins_a>; + status = "okay"; +}; + +&can0 { + pinctrl-names = "default"; + pinctrl-0 = <&can0_pins_a>; + xceiver-supply = <®_can_xcvr>; + status = "okay"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&can1_pins_a>; + xceiver-supply = <®_can_xcvr>; + status = "okay"; +}; + +&digctl { + status = "okay"; +}; + +/* 1st TX-Std UART - (D)UART */ +&duart { + pinctrl-names = "default"; + pinctrl-0 = <&duart_4pins_a>; + status = "okay"; +}; + +&gpmi { + pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; + nand-on-flash-bbt; + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + clock-frequency = <400000>; + status = "okay"; + + sgtl5000: sgtl5000@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + VDDA-supply = <®_2p5v>; + VDDIO-supply = <®_3p3v>; + clocks = <&mclk>; + }; + + gpio5: pca953x@20 { + compatible = "nxp,pca9554"; + reg = <0x20>; + pinctrl-names = "default"; + pinctrl-0 = <&tx28_pca9554_pins>; + interrupt-parent = <&gpio3>; + interrupts = <28 0>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + polytouch: edt-ft5x06@38 { + compatible = "edt,edt-ft5x06"; + reg = <0x38>; + pinctrl-names = "default"; + pinctrl-0 = <&tx28_edt_ft5x06_pins>; + interrupt-parent = <&gpio2>; + interrupts = <5 0>; + reset-gpios = <&gpio2 6 1>; + wake-gpios = <&gpio4 9 0>; + }; + + touchscreen: tsc2007@48 { + compatible = "ti,tsc2007"; + reg = <0x48>; + pinctrl-names = "default"; + pinctrl-0 = <&tx28_tsc2007_pins>; + interrupt-parent = <&gpio3>; + interrupts = <20 0>; + pendown-gpio = <&gpio3 20 1>; + ti,x-plate-ohms = /bits/ 16 <660>; + }; + + ds1339: rtc@68 { + compatible = "mxim,ds1339"; + reg = <0x68>; + }; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_24bit_pins_a &lcdif_sync_pins_a &tx28_lcdif_ctrl_pins>; + lcd-supply = <®_lcd>; + display = <&display>; + status = "okay"; + + display: display@0 { + bits-per-pixel = <32>; + bus-width = <24>; + display-timings { + native-mode = <&timing5>; + timing0: timing0 { + panel-name = "VGA"; + clock-frequency = <25175000>; + hactive = <640>; + vactive = <480>; + hback-porch = <48>; + hsync-len = <96>; + hfront-porch = <16>; + vback-porch = <33>; + vsync-len = <2>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + timing1: timing1 { + panel-name = "ETV570"; + clock-frequency = <25175000>; + hactive = <640>; + vactive = <480>; + hback-porch = <114>; + hsync-len = <30>; + hfront-porch = <16>; + vback-porch = <32>; + vsync-len = <3>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + timing2: timing2 { + panel-name = "ET0350"; + clock-frequency = <6500000>; + hactive = <320>; + vactive = <240>; + hback-porch = <34>; + hsync-len = <34>; + hfront-porch = <20>; + vback-porch = <15>; + vsync-len = <3>; + vfront-porch = <4>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + timing3: timing3 { + panel-name = "ET0430"; + clock-frequency = <9000000>; + hactive = <480>; + vactive = <272>; + hback-porch = <2>; + hsync-len = <41>; + hfront-porch = <2>; + vback-porch = <2>; + vsync-len = <10>; + vfront-porch = <2>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + timing4: timing4 { + panel-name = "ET0500", "ET0700"; + clock-frequency = <33260000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hsync-len = <128>; + hfront-porch = <40>; + vback-porch = <33>; + vsync-len = <2>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + timing5: timing5 { + panel-name = "ETQ570"; + clock-frequency = <6400000>; + hactive = <320>; + vactive = <240>; + hback-porch = <38>; + hsync-len = <30>; + hfront-porch = <30>; + vback-porch = <16>; + vsync-len = <3>; + vfront-porch = <4>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; +}; + +&lradc { + fsl,lradc-touchscreen-wires = <4>; + status = "okay"; +}; + +&mac0 { + phy-mode = "rmii"; + pinctrl-names = "default", "gpio_mode"; + pinctrl-0 = <&mac0_pins_a>; + pinctrl-1 = <&tx28_mac0_pins_gpio>; + status = "okay"; +}; + +&mac1 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac1_pins_a>; + /* not enabled by default */ +}; + +&mxs_rtc { + status = "okay"; +}; + +&ocotp { + status = "okay"; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pins_a>; + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_ENET0_RXD3__GPIO_4_10 /* module LED */ + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + tx28_edt_ft5x06_pins: tx28-edt-ft5x06-pins { + fsl,pinmux-ids = < + MX28_PAD_SSP0_DATA6__GPIO_2_6 /* RESET */ + MX28_PAD_SSP0_DATA5__GPIO_2_5 /* IRQ */ + MX28_PAD_ENET0_RXD2__GPIO_4_9 /* WAKE */ + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + tx28_flexcan_xcvr_pins: tx28-flexcan-xcvr-pins { + fsl,pinmux-ids = < + MX28_PAD_LCD_D00__GPIO_1_0 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + tx28_lcdif_23bit_pins: tx28-lcdif-23bit { + fsl,pinmux-ids = < + /* LCD_D00 may be used as Flexcan Transceiver Enable on STK5-V5 */ + MX28_PAD_LCD_D01__LCD_D1 + MX28_PAD_LCD_D02__LCD_D2 + MX28_PAD_LCD_D03__LCD_D3 + MX28_PAD_LCD_D04__LCD_D4 + MX28_PAD_LCD_D05__LCD_D5 + MX28_PAD_LCD_D06__LCD_D6 + MX28_PAD_LCD_D07__LCD_D7 + MX28_PAD_LCD_D08__LCD_D8 + MX28_PAD_LCD_D09__LCD_D9 + MX28_PAD_LCD_D10__LCD_D10 + MX28_PAD_LCD_D11__LCD_D11 + MX28_PAD_LCD_D12__LCD_D12 + MX28_PAD_LCD_D13__LCD_D13 + MX28_PAD_LCD_D14__LCD_D14 + MX28_PAD_LCD_D15__LCD_D15 + MX28_PAD_LCD_D16__LCD_D16 + MX28_PAD_LCD_D17__LCD_D17 + MX28_PAD_LCD_D18__LCD_D18 + MX28_PAD_LCD_D19__LCD_D19 + MX28_PAD_LCD_D20__LCD_D20 + MX28_PAD_LCD_D21__LCD_D21 + MX28_PAD_LCD_D22__LCD_D22 + MX28_PAD_LCD_D23__LCD_D23 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + tx28_lcdif_ctrl_pins: tx28-lcdif-ctrl { + fsl,pinmux-ids = < + MX28_PAD_LCD_ENABLE__GPIO_1_31 /* Enable */ + MX28_PAD_LCD_RESET__GPIO_3_30 /* Reset */ + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + tx28_mac0_pins_gpio: tx28-mac0-gpio-pins { + fsl,pinmux-ids = < + MX28_PAD_ENET0_MDC__GPIO_4_0 + MX28_PAD_ENET0_MDIO__GPIO_4_1 + MX28_PAD_ENET0_RX_EN__GPIO_4_2 + MX28_PAD_ENET0_RXD0__GPIO_4_3 + MX28_PAD_ENET0_RXD1__GPIO_4_4 + MX28_PAD_ENET0_TX_EN__GPIO_4_6 + MX28_PAD_ENET0_TXD0__GPIO_4_7 + MX28_PAD_ENET0_TXD1__GPIO_4_8 + MX28_PAD_ENET_CLK__GPIO_4_16 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + tx28_pca9554_pins: tx28-pca9554-pins { + fsl,pinmux-ids = < + MX28_PAD_PWM3__GPIO_3_28 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + tx28_tsc2007_pins: tx28-tsc2007-pins { + fsl,pinmux-ids = < + MX28_PAD_SAIF0_MCLK__GPIO_3_20 /* TSC2007 IRQ */ + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + + tx28_usbphy0_pins: tx28-usbphy0-pins { + fsl,pinmux-ids = < + MX28_PAD_GPMI_CE2N__GPIO_0_18 /* USBOTG_VBUSEN */ + MX28_PAD_GPMI_CE3N__GPIO_0_19 /* USBOTH_OC */ + >; + fsl,drive-strength = <MXS_DRIVE_12mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + tx28_usbphy1_pins: tx28-usbphy1-pins { + fsl,pinmux-ids = < + MX28_PAD_SPDIF__GPIO_3_27 /* USBH_VBUSEN */ + MX28_PAD_JTAG_RTCK__GPIO_4_20 /* USBH_OC */ + >; + fsl,drive-strength = <MXS_DRIVE_12mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; +}; + +&saif0 { + pinctrl-names = "default"; + pinctrl-0 = <&saif0_pins_b>; + fsl,saif-master; + status = "okay"; +}; + +&saif1 { + pinctrl-names = "default"; + pinctrl-0 = <&saif1_pins_a>; + status = "okay"; +}; + +&ssp0 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default", "special"; + pinctrl-0 = <&mmc0_4bit_pins_a + &mmc0_cd_cfg + &mmc0_sck_cfg>; + bus-width = <4>; + status = "okay"; +}; + +&ssp3 { + compatible = "fsl,imx28-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi3_pins_a>; + clock-frequency = <57600000>; + status = "okay"; + + spidev0: spi@0 { + compatible = "spidev"; + reg = <0>; + spi-max-frequency = <57600000>; + }; + + spidev1: spi@1 { + compatible = "spidev"; + reg = <1>; + spi-max-frequency = <57600000>; }; }; + +&usb0 { + vbus-supply = <®_usb0_vbus>; + disable-over-current; + dr_mode = "peripheral"; + status = "okay"; +}; + +&usb1 { + vbus-supply = <®_usb1_vbus>; + disable-over-current; + dr_mode = "host"; + status = "okay"; +}; + +&usbphy0 { + pinctrl-names = "default"; + pinctrl-0 = <&tx28_usbphy0_pins>; + phy_type = "utmi"; + status = "okay"; +}; + +&usbphy1 { + pinctrl-names = "default"; + pinctrl-0 = <&tx28_usbphy1_pins>; + phy_type = "utmi"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 7363fded95e..cda19c8b0a4 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -9,7 +9,8 @@ * http://www.gnu.org/copyleft/gpl.html */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" +#include "imx28-pinfunc.h" / { interrupt-parent = <&icoll>; @@ -207,538 +208,579 @@ duart_pins_a: duart@0 { reg = <0>; fsl,pinmux-ids = < - 0x3102 /* MX28_PAD_PWM0__DUART_RX */ - 0x3112 /* MX28_PAD_PWM1__DUART_TX */ + MX28_PAD_PWM0__DUART_RX + MX28_PAD_PWM1__DUART_TX >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; duart_pins_b: duart@1 { reg = <1>; fsl,pinmux-ids = < - 0x3022 /* MX28_PAD_AUART0_CTS__DUART_RX */ - 0x3032 /* MX28_PAD_AUART0_RTS__DUART_TX */ + MX28_PAD_AUART0_CTS__DUART_RX + MX28_PAD_AUART0_RTS__DUART_TX >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; duart_4pins_a: duart-4pins@0 { reg = <0>; fsl,pinmux-ids = < - 0x3022 /* MX28_PAD_AUART0_CTS__DUART_RX */ - 0x3032 /* MX28_PAD_AUART0_RTS__DUART_TX */ - 0x3002 /* MX28_PAD_AUART0_RX__DUART_CTS */ - 0x3012 /* MX28_PAD_AUART0_TX__DUART_RTS */ + MX28_PAD_AUART0_CTS__DUART_RX + MX28_PAD_AUART0_RTS__DUART_TX + MX28_PAD_AUART0_RX__DUART_CTS + MX28_PAD_AUART0_TX__DUART_RTS >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; gpmi_pins_a: gpmi-nand@0 { reg = <0>; fsl,pinmux-ids = < - 0x0000 /* MX28_PAD_GPMI_D00__GPMI_D0 */ - 0x0010 /* MX28_PAD_GPMI_D01__GPMI_D1 */ - 0x0020 /* MX28_PAD_GPMI_D02__GPMI_D2 */ - 0x0030 /* MX28_PAD_GPMI_D03__GPMI_D3 */ - 0x0040 /* MX28_PAD_GPMI_D04__GPMI_D4 */ - 0x0050 /* MX28_PAD_GPMI_D05__GPMI_D5 */ - 0x0060 /* MX28_PAD_GPMI_D06__GPMI_D6 */ - 0x0070 /* MX28_PAD_GPMI_D07__GPMI_D7 */ - 0x0100 /* MX28_PAD_GPMI_CE0N__GPMI_CE0N */ - 0x0140 /* MX28_PAD_GPMI_RDY0__GPMI_READY0 */ - 0x0180 /* MX28_PAD_GPMI_RDN__GPMI_RDN */ - 0x0190 /* MX28_PAD_GPMI_WRN__GPMI_WRN */ - 0x01a0 /* MX28_PAD_GPMI_ALE__GPMI_ALE */ - 0x01b0 /* MX28_PAD_GPMI_CLE__GPMI_CLE */ - 0x01c0 /* MX28_PAD_GPMI_RESETN__GPMI_RESETN */ + MX28_PAD_GPMI_D00__GPMI_D0 + MX28_PAD_GPMI_D01__GPMI_D1 + MX28_PAD_GPMI_D02__GPMI_D2 + MX28_PAD_GPMI_D03__GPMI_D3 + MX28_PAD_GPMI_D04__GPMI_D4 + MX28_PAD_GPMI_D05__GPMI_D5 + MX28_PAD_GPMI_D06__GPMI_D6 + MX28_PAD_GPMI_D07__GPMI_D7 + MX28_PAD_GPMI_CE0N__GPMI_CE0N + MX28_PAD_GPMI_RDY0__GPMI_READY0 + MX28_PAD_GPMI_RDN__GPMI_RDN + MX28_PAD_GPMI_WRN__GPMI_WRN + MX28_PAD_GPMI_ALE__GPMI_ALE + MX28_PAD_GPMI_CLE__GPMI_CLE + MX28_PAD_GPMI_RESETN__GPMI_RESETN >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; gpmi_status_cfg: gpmi-status-cfg { fsl,pinmux-ids = < - 0x0180 /* MX28_PAD_GPMI_RDN__GPMI_RDN */ - 0x0190 /* MX28_PAD_GPMI_WRN__GPMI_WRN */ - 0x01c0 /* MX28_PAD_GPMI_RESETN__GPMI_RESETN */ + MX28_PAD_GPMI_RDN__GPMI_RDN + MX28_PAD_GPMI_WRN__GPMI_WRN + MX28_PAD_GPMI_RESETN__GPMI_RESETN >; - fsl,drive-strength = <2>; + fsl,drive-strength = <MXS_DRIVE_12mA>; }; auart0_pins_a: auart0@0 { reg = <0>; fsl,pinmux-ids = < - 0x3000 /* MX28_PAD_AUART0_RX__AUART0_RX */ - 0x3010 /* MX28_PAD_AUART0_TX__AUART0_TX */ - 0x3020 /* MX28_PAD_AUART0_CTS__AUART0_CTS */ - 0x3030 /* MX28_PAD_AUART0_RTS__AUART0_RTS */ + MX28_PAD_AUART0_RX__AUART0_RX + MX28_PAD_AUART0_TX__AUART0_TX + MX28_PAD_AUART0_CTS__AUART0_CTS + MX28_PAD_AUART0_RTS__AUART0_RTS >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; auart0_2pins_a: auart0-2pins@0 { reg = <0>; fsl,pinmux-ids = < - 0x3000 /* MX28_PAD_AUART0_RX__AUART0_RX */ - 0x3010 /* MX28_PAD_AUART0_TX__AUART0_TX */ + MX28_PAD_AUART0_RX__AUART0_RX + MX28_PAD_AUART0_TX__AUART0_TX >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; auart1_pins_a: auart1@0 { reg = <0>; fsl,pinmux-ids = < - 0x3040 /* MX28_PAD_AUART1_RX__AUART1_RX */ - 0x3050 /* MX28_PAD_AUART1_TX__AUART1_TX */ - 0x3060 /* MX28_PAD_AUART1_CTS__AUART1_CTS */ - 0x3070 /* MX28_PAD_AUART1_RTS__AUART1_RTS */ + MX28_PAD_AUART1_RX__AUART1_RX + MX28_PAD_AUART1_TX__AUART1_TX + MX28_PAD_AUART1_CTS__AUART1_CTS + MX28_PAD_AUART1_RTS__AUART1_RTS >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; auart1_2pins_a: auart1-2pins@0 { reg = <0>; fsl,pinmux-ids = < - 0x3040 /* MX28_PAD_AUART1_RX__AUART1_RX */ - 0x3050 /* MX28_PAD_AUART1_TX__AUART1_TX */ + MX28_PAD_AUART1_RX__AUART1_RX + MX28_PAD_AUART1_TX__AUART1_TX >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; auart2_2pins_a: auart2-2pins@0 { reg = <0>; fsl,pinmux-ids = < - 0x2101 /* MX28_PAD_SSP2_SCK__AUART2_RX */ - 0x2111 /* MX28_PAD_SSP2_MOSI__AUART2_TX */ + MX28_PAD_SSP2_SCK__AUART2_RX + MX28_PAD_SSP2_MOSI__AUART2_TX >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; auart2_2pins_b: auart2-2pins@1 { reg = <1>; fsl,pinmux-ids = < - 0x3080 /* MX28_PAD_AUART2_RX__AUART2_RX */ - 0x3090 /* MX28_PAD_AUART2_TX__AUART2_TX */ + MX28_PAD_AUART2_RX__AUART2_RX + MX28_PAD_AUART2_TX__AUART2_TX >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; auart3_pins_a: auart3@0 { reg = <0>; fsl,pinmux-ids = < - 0x30c0 /* MX28_PAD_AUART3_RX__AUART3_RX */ - 0x30d0 /* MX28_PAD_AUART3_TX__AUART3_TX */ - 0x30e0 /* MX28_PAD_AUART3_CTS__AUART3_CTS */ - 0x30f0 /* MX28_PAD_AUART3_RTS__AUART3_RTS */ + MX28_PAD_AUART3_RX__AUART3_RX + MX28_PAD_AUART3_TX__AUART3_TX + MX28_PAD_AUART3_CTS__AUART3_CTS + MX28_PAD_AUART3_RTS__AUART3_RTS >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; auart3_2pins_a: auart3-2pins@0 { reg = <0>; fsl,pinmux-ids = < - 0x2121 /* MX28_PAD_SSP2_MISO__AUART3_RX */ - 0x2131 /* MX28_PAD_SSP2_SS0__AUART3_TX */ + MX28_PAD_SSP2_MISO__AUART3_RX + MX28_PAD_SSP2_SS0__AUART3_TX >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; auart3_2pins_b: auart3-2pins@1 { reg = <1>; fsl,pinmux-ids = < - 0x30c0 /* MX28_PAD_AUART3_RX__AUART3_RX */ - 0x30d0 /* MX28_PAD_AUART3_TX__AUART3_TX */ + MX28_PAD_AUART3_RX__AUART3_RX + MX28_PAD_AUART3_TX__AUART3_TX >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; auart4_2pins_a: auart4@0 { reg = <0>; fsl,pinmux-ids = < - 0x2181 /* MX28_PAD_SSP3_SCK__AUART4_TX */ - 0x2191 /* MX28_PAD_SSP3_MOSI__AUART4_RX */ + MX28_PAD_SSP3_SCK__AUART4_TX + MX28_PAD_SSP3_MOSI__AUART4_RX >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; mac0_pins_a: mac0@0 { reg = <0>; fsl,pinmux-ids = < - 0x4000 /* MX28_PAD_ENET0_MDC__ENET0_MDC */ - 0x4010 /* MX28_PAD_ENET0_MDIO__ENET0_MDIO */ - 0x4020 /* MX28_PAD_ENET0_RX_EN__ENET0_RX_EN */ - 0x4030 /* MX28_PAD_ENET0_RXD0__ENET0_RXD0 */ - 0x4040 /* MX28_PAD_ENET0_RXD1__ENET0_RXD1 */ - 0x4060 /* MX28_PAD_ENET0_TX_EN__ENET0_TX_EN */ - 0x4070 /* MX28_PAD_ENET0_TXD0__ENET0_TXD0 */ - 0x4080 /* MX28_PAD_ENET0_TXD1__ENET0_TXD1 */ - 0x4100 /* MX28_PAD_ENET_CLK__CLKCTRL_ENET */ + MX28_PAD_ENET0_MDC__ENET0_MDC + MX28_PAD_ENET0_MDIO__ENET0_MDIO + MX28_PAD_ENET0_RX_EN__ENET0_RX_EN + MX28_PAD_ENET0_RXD0__ENET0_RXD0 + MX28_PAD_ENET0_RXD1__ENET0_RXD1 + MX28_PAD_ENET0_TX_EN__ENET0_TX_EN + MX28_PAD_ENET0_TXD0__ENET0_TXD0 + MX28_PAD_ENET0_TXD1__ENET0_TXD1 + MX28_PAD_ENET_CLK__CLKCTRL_ENET >; - fsl,drive-strength = <1>; - fsl,voltage = <1>; - fsl,pull-up = <1>; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; }; mac1_pins_a: mac1@0 { reg = <0>; fsl,pinmux-ids = < - 0x40f1 /* MX28_PAD_ENET0_CRS__ENET1_RX_EN */ - 0x4091 /* MX28_PAD_ENET0_RXD2__ENET1_RXD0 */ - 0x40a1 /* MX28_PAD_ENET0_RXD3__ENET1_RXD1 */ - 0x40e1 /* MX28_PAD_ENET0_COL__ENET1_TX_EN */ - 0x40b1 /* MX28_PAD_ENET0_TXD2__ENET1_TXD0 */ - 0x40c1 /* MX28_PAD_ENET0_TXD3__ENET1_TXD1 */ + MX28_PAD_ENET0_CRS__ENET1_RX_EN + MX28_PAD_ENET0_RXD2__ENET1_RXD0 + MX28_PAD_ENET0_RXD3__ENET1_RXD1 + MX28_PAD_ENET0_COL__ENET1_TX_EN + MX28_PAD_ENET0_TXD2__ENET1_TXD0 + MX28_PAD_ENET0_TXD3__ENET1_TXD1 >; - fsl,drive-strength = <1>; - fsl,voltage = <1>; - fsl,pull-up = <1>; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; }; mmc0_8bit_pins_a: mmc0-8bit@0 { reg = <0>; fsl,pinmux-ids = < - 0x2000 /* MX28_PAD_SSP0_DATA0__SSP0_D0 */ - 0x2010 /* MX28_PAD_SSP0_DATA1__SSP0_D1 */ - 0x2020 /* MX28_PAD_SSP0_DATA2__SSP0_D2 */ - 0x2030 /* MX28_PAD_SSP0_DATA3__SSP0_D3 */ - 0x2040 /* MX28_PAD_SSP0_DATA4__SSP0_D4 */ - 0x2050 /* MX28_PAD_SSP0_DATA5__SSP0_D5 */ - 0x2060 /* MX28_PAD_SSP0_DATA6__SSP0_D6 */ - 0x2070 /* MX28_PAD_SSP0_DATA7__SSP0_D7 */ - 0x2080 /* MX28_PAD_SSP0_CMD__SSP0_CMD */ - 0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */ - 0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */ + MX28_PAD_SSP0_DATA0__SSP0_D0 + MX28_PAD_SSP0_DATA1__SSP0_D1 + MX28_PAD_SSP0_DATA2__SSP0_D2 + MX28_PAD_SSP0_DATA3__SSP0_D3 + MX28_PAD_SSP0_DATA4__SSP0_D4 + MX28_PAD_SSP0_DATA5__SSP0_D5 + MX28_PAD_SSP0_DATA6__SSP0_D6 + MX28_PAD_SSP0_DATA7__SSP0_D7 + MX28_PAD_SSP0_CMD__SSP0_CMD + MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT + MX28_PAD_SSP0_SCK__SSP0_SCK >; - fsl,drive-strength = <1>; - fsl,voltage = <1>; - fsl,pull-up = <1>; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; }; mmc0_4bit_pins_a: mmc0-4bit@0 { reg = <0>; fsl,pinmux-ids = < - 0x2000 /* MX28_PAD_SSP0_DATA0__SSP0_D0 */ - 0x2010 /* MX28_PAD_SSP0_DATA1__SSP0_D1 */ - 0x2020 /* MX28_PAD_SSP0_DATA2__SSP0_D2 */ - 0x2030 /* MX28_PAD_SSP0_DATA3__SSP0_D3 */ - 0x2080 /* MX28_PAD_SSP0_CMD__SSP0_CMD */ - 0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */ - 0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */ + MX28_PAD_SSP0_DATA0__SSP0_D0 + MX28_PAD_SSP0_DATA1__SSP0_D1 + MX28_PAD_SSP0_DATA2__SSP0_D2 + MX28_PAD_SSP0_DATA3__SSP0_D3 + MX28_PAD_SSP0_CMD__SSP0_CMD + MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT + MX28_PAD_SSP0_SCK__SSP0_SCK >; - fsl,drive-strength = <1>; - fsl,voltage = <1>; - fsl,pull-up = <1>; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; }; mmc0_cd_cfg: mmc0-cd-cfg { fsl,pinmux-ids = < - 0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */ + MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT >; - fsl,pull-up = <0>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; mmc0_sck_cfg: mmc0-sck-cfg { fsl,pinmux-ids = < - 0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */ + MX28_PAD_SSP0_SCK__SSP0_SCK >; - fsl,drive-strength = <2>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_12mA>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + mmc2_4bit_pins_a: mmc2-4bit@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SSP0_DATA4__SSP2_D0 + MX28_PAD_SSP1_SCK__SSP2_D1 + MX28_PAD_SSP1_CMD__SSP2_D2 + MX28_PAD_SSP0_DATA5__SSP2_D3 + MX28_PAD_SSP0_DATA6__SSP2_CMD + MX28_PAD_AUART1_RX__SSP2_CARD_DETECT + MX28_PAD_SSP0_DATA7__SSP2_SCK + >; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + + mmc2_cd_cfg: mmc2-cd-cfg { + fsl,pinmux-ids = < + MX28_PAD_AUART1_RX__SSP2_CARD_DETECT + >; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + mmc2_sck_cfg: mmc2-sck-cfg { + fsl,pinmux-ids = < + MX28_PAD_SSP0_DATA7__SSP2_SCK + >; + fsl,drive-strength = <MXS_DRIVE_12mA>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; i2c0_pins_a: i2c0@0 { reg = <0>; fsl,pinmux-ids = < - 0x3180 /* MX28_PAD_I2C0_SCL__I2C0_SCL */ - 0x3190 /* MX28_PAD_I2C0_SDA__I2C0_SDA */ + MX28_PAD_I2C0_SCL__I2C0_SCL + MX28_PAD_I2C0_SDA__I2C0_SDA >; - fsl,drive-strength = <1>; - fsl,voltage = <1>; - fsl,pull-up = <1>; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; }; i2c0_pins_b: i2c0@1 { reg = <1>; fsl,pinmux-ids = < - 0x3001 /* MX28_PAD_AUART0_RX__I2C0_SCL */ - 0x3011 /* MX28_PAD_AUART0_TX__I2C0_SDA */ + MX28_PAD_AUART0_RX__I2C0_SCL + MX28_PAD_AUART0_TX__I2C0_SDA >; - fsl,drive-strength = <1>; - fsl,voltage = <1>; - fsl,pull-up = <1>; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; }; i2c1_pins_a: i2c1@0 { reg = <0>; fsl,pinmux-ids = < - 0x3101 /* MX28_PAD_PWM0__I2C1_SCL */ - 0x3111 /* MX28_PAD_PWM1__I2C1_SDA */ + MX28_PAD_PWM0__I2C1_SCL + MX28_PAD_PWM1__I2C1_SDA >; - fsl,drive-strength = <1>; - fsl,voltage = <1>; - fsl,pull-up = <1>; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; }; saif0_pins_a: saif0@0 { reg = <0>; fsl,pinmux-ids = < - 0x3140 /* MX28_PAD_SAIF0_MCLK__SAIF0_MCLK */ - 0x3150 /* MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK */ - 0x3160 /* MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK */ - 0x3170 /* MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 */ + MX28_PAD_SAIF0_MCLK__SAIF0_MCLK + MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK + MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK + MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 >; - fsl,drive-strength = <2>; - fsl,voltage = <1>; - fsl,pull-up = <1>; + fsl,drive-strength = <MXS_DRIVE_12mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; }; saif0_pins_b: saif0@1 { reg = <1>; fsl,pinmux-ids = < - 0x3150 /* MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK */ - 0x3160 /* MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK */ - 0x3170 /* MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 */ + MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK + MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK + MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 >; - fsl,drive-strength = <2>; - fsl,voltage = <1>; - fsl,pull-up = <1>; + fsl,drive-strength = <MXS_DRIVE_12mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; }; saif1_pins_a: saif1@0 { reg = <0>; fsl,pinmux-ids = < - 0x31a0 /* MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 */ + MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 >; - fsl,drive-strength = <2>; - fsl,voltage = <1>; - fsl,pull-up = <1>; + fsl,drive-strength = <MXS_DRIVE_12mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; }; pwm0_pins_a: pwm0@0 { reg = <0>; fsl,pinmux-ids = < - 0x3100 /* MX28_PAD_PWM0__PWM_0 */ + MX28_PAD_PWM0__PWM_0 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; pwm2_pins_a: pwm2@0 { reg = <0>; fsl,pinmux-ids = < - 0x3120 /* MX28_PAD_PWM2__PWM_2 */ + MX28_PAD_PWM2__PWM_2 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; pwm3_pins_a: pwm3@0 { reg = <0>; fsl,pinmux-ids = < - 0x31c0 /* MX28_PAD_PWM3__PWM_3 */ + MX28_PAD_PWM3__PWM_3 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; pwm3_pins_b: pwm3@1 { reg = <1>; fsl,pinmux-ids = < - 0x3141 /* MX28_PAD_SAIF0_MCLK__PWM3 */ + MX28_PAD_SAIF0_MCLK__PWM_3 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; pwm4_pins_a: pwm4@0 { reg = <0>; fsl,pinmux-ids = < - 0x31d0 /* MX28_PAD_PWM4__PWM_4 */ + MX28_PAD_PWM4__PWM_4 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; lcdif_24bit_pins_a: lcdif-24bit@0 { reg = <0>; fsl,pinmux-ids = < - 0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */ - 0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */ - 0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */ - 0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */ - 0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */ - 0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */ - 0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */ - 0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */ - 0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */ - 0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */ - 0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */ - 0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */ - 0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */ - 0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */ - 0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */ - 0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */ - 0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */ - 0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */ - 0x1120 /* MX28_PAD_LCD_D18__LCD_D18 */ - 0x1130 /* MX28_PAD_LCD_D19__LCD_D19 */ - 0x1140 /* MX28_PAD_LCD_D20__LCD_D20 */ - 0x1150 /* MX28_PAD_LCD_D21__LCD_D21 */ - 0x1160 /* MX28_PAD_LCD_D22__LCD_D22 */ - 0x1170 /* MX28_PAD_LCD_D23__LCD_D23 */ + MX28_PAD_LCD_D00__LCD_D0 + MX28_PAD_LCD_D01__LCD_D1 + MX28_PAD_LCD_D02__LCD_D2 + MX28_PAD_LCD_D03__LCD_D3 + MX28_PAD_LCD_D04__LCD_D4 + MX28_PAD_LCD_D05__LCD_D5 + MX28_PAD_LCD_D06__LCD_D6 + MX28_PAD_LCD_D07__LCD_D7 + MX28_PAD_LCD_D08__LCD_D8 + MX28_PAD_LCD_D09__LCD_D9 + MX28_PAD_LCD_D10__LCD_D10 + MX28_PAD_LCD_D11__LCD_D11 + MX28_PAD_LCD_D12__LCD_D12 + MX28_PAD_LCD_D13__LCD_D13 + MX28_PAD_LCD_D14__LCD_D14 + MX28_PAD_LCD_D15__LCD_D15 + MX28_PAD_LCD_D16__LCD_D16 + MX28_PAD_LCD_D17__LCD_D17 + MX28_PAD_LCD_D18__LCD_D18 + MX28_PAD_LCD_D19__LCD_D19 + MX28_PAD_LCD_D20__LCD_D20 + MX28_PAD_LCD_D21__LCD_D21 + MX28_PAD_LCD_D22__LCD_D22 + MX28_PAD_LCD_D23__LCD_D23 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; lcdif_16bit_pins_a: lcdif-16bit@0 { reg = <0>; fsl,pinmux-ids = < - 0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */ - 0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */ - 0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */ - 0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */ - 0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */ - 0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */ - 0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */ - 0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */ - 0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */ - 0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */ - 0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */ - 0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */ - 0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */ - 0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */ - 0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */ - 0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */ + MX28_PAD_LCD_D00__LCD_D0 + MX28_PAD_LCD_D01__LCD_D1 + MX28_PAD_LCD_D02__LCD_D2 + MX28_PAD_LCD_D03__LCD_D3 + MX28_PAD_LCD_D04__LCD_D4 + MX28_PAD_LCD_D05__LCD_D5 + MX28_PAD_LCD_D06__LCD_D6 + MX28_PAD_LCD_D07__LCD_D7 + MX28_PAD_LCD_D08__LCD_D8 + MX28_PAD_LCD_D09__LCD_D9 + MX28_PAD_LCD_D10__LCD_D10 + MX28_PAD_LCD_D11__LCD_D11 + MX28_PAD_LCD_D12__LCD_D12 + MX28_PAD_LCD_D13__LCD_D13 + MX28_PAD_LCD_D14__LCD_D14 + MX28_PAD_LCD_D15__LCD_D15 >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; lcdif_sync_pins_a: lcdif-sync@0 { reg = <0>; fsl,pinmux-ids = < - 0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */ - 0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */ - 0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */ - 0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */ + MX28_PAD_LCD_RS__LCD_DOTCLK + MX28_PAD_LCD_CS__LCD_ENABLE + MX28_PAD_LCD_RD_E__LCD_VSYNC + MX28_PAD_LCD_WR_RWN__LCD_HSYNC >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; can0_pins_a: can0@0 { reg = <0>; fsl,pinmux-ids = < - 0x0161 /* MX28_PAD_GPMI_RDY2__CAN0_TX */ - 0x0171 /* MX28_PAD_GPMI_RDY3__CAN0_RX */ + MX28_PAD_GPMI_RDY2__CAN0_TX + MX28_PAD_GPMI_RDY3__CAN0_RX >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; can1_pins_a: can1@0 { reg = <0>; fsl,pinmux-ids = < - 0x0121 /* MX28_PAD_GPMI_CE2N__CAN1_TX */ - 0x0131 /* MX28_PAD_GPMI_CE3N__CAN1_RX */ + MX28_PAD_GPMI_CE2N__CAN1_TX + MX28_PAD_GPMI_CE3N__CAN1_RX >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; spi2_pins_a: spi2@0 { reg = <0>; fsl,pinmux-ids = < - 0x2100 /* MX28_PAD_SSP2_SCK__SSP2_SCK */ - 0x2110 /* MX28_PAD_SSP2_MOSI__SSP2_CMD */ - 0x2120 /* MX28_PAD_SSP2_MISO__SSP2_D0 */ - 0x2130 /* MX28_PAD_SSP2_SS0__SSP2_D3 */ + MX28_PAD_SSP2_SCK__SSP2_SCK + MX28_PAD_SSP2_MOSI__SSP2_CMD + MX28_PAD_SSP2_MISO__SSP2_D0 + MX28_PAD_SSP2_SS0__SSP2_D3 >; - fsl,drive-strength = <1>; - fsl,voltage = <1>; - fsl,pull-up = <1>; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; }; spi3_pins_a: spi3@0 { reg = <0>; fsl,pinmux-ids = < - 0x3082 /* MX28_PAD_AUART2_RX__SSP3_D4 */ - 0x3092 /* MX28_PAD_AUART2_TX__SSP3_D5 */ - 0x2180 /* MX28_PAD_SSP3_SCK__SSP3_SCK */ - 0x2190 /* MX28_PAD_SSP3_MOSI__SSP3_CMD */ - 0x21A0 /* MX28_PAD_SSP3_MISO__SSP3_D0 */ - 0x21B0 /* MX28_PAD_SSP3_SS0__SSP3_D3 */ + MX28_PAD_AUART2_RX__SSP3_D4 + MX28_PAD_AUART2_TX__SSP3_D5 + MX28_PAD_SSP3_SCK__SSP3_SCK + MX28_PAD_SSP3_MOSI__SSP3_CMD + MX28_PAD_SSP3_MISO__SSP3_D0 + MX28_PAD_SSP3_SS0__SSP3_D3 >; - fsl,drive-strength = <1>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; usbphy0_pins_a: usbphy0@0 { reg = <0>; fsl,pinmux-ids = < - 0x2152 /* MX28_PAD_SSP2_SS2__USB0_OVERCURRENT */ + MX28_PAD_SSP2_SS2__USB0_OVERCURRENT >; - fsl,drive-strength = <2>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_12mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; usbphy0_pins_b: usbphy0@1 { reg = <1>; fsl,pinmux-ids = < - 0x3061 /* MX28_PAD_AUART1_CTS__USB0_OVERCURRENT */ + MX28_PAD_AUART1_CTS__USB0_OVERCURRENT >; - fsl,drive-strength = <2>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_12mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; usbphy1_pins_a: usbphy1@0 { reg = <0>; fsl,pinmux-ids = < - 0x2142 /* MX28_PAD_SSP2_SS1__USB1_OVERCURRENT */ + MX28_PAD_SSP2_SS1__USB1_OVERCURRENT + >; + fsl,drive-strength = <MXS_DRIVE_12mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + usb0_id_pins_a: usb0id@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_AUART1_RTS__USB0_ID >; - fsl,drive-strength = <2>; - fsl,voltage = <1>; - fsl,pull-up = <0>; + fsl,drive-strength = <MXS_DRIVE_12mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; }; }; @@ -902,6 +944,7 @@ interrupts = <10 14 15 16 17 18 19 20 21 22 23 24 25>; status = "disabled"; + clocks = <&clks 41>; }; spdif: spdif@80054000 { diff --git a/arch/arm/boot/dts/imx51-apf51dev.dts b/arch/arm/boot/dts/imx51-apf51dev.dts index 123fe84e0e8..5a7f552786a 100644 --- a/arch/arm/boot/dts/imx51-apf51dev.dts +++ b/arch/arm/boot/dts/imx51-apf51dev.dts @@ -16,6 +16,33 @@ model = "Armadeus Systems APF51Dev docking/development board"; compatible = "armadeus,imx51-apf51dev", "armadeus,imx51-apf51", "fsl,imx51"; + display@di1 { + compatible = "fsl,imx-parallel-display"; + crtcs = <&ipu 0>; + interface-pix-fmt = "bgr666"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu_disp1_1>; + + display-timings { + lw700 { + native-mode; + clock-frequency = <33000033>; + hactive = <800>; + vactive = <480>; + hback-porch = <96>; + hfront-porch = <96>; + vback-porch = <20>; + vfront-porch = <21>; + hsync-len = <64>; + vsync-len = <4>; + hsync-active = <1>; + vsync-active = <1>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; + gpio-keys { compatible = "gpio-keys"; diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index 1d337d99ecd..be1407cf5ab 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -27,6 +27,20 @@ interface-pix-fmt = "rgb24"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ipu_disp1_1>; + display-timings { + native-mode = <&timing0>; + timing0: dvi { + clock-frequency = <65000000>; + hactive = <1024>; + vactive = <768>; + hback-porch = <220>; + hfront-porch = <40>; + vback-porch = <21>; + vfront-porch = <7>; + hsync-len = <60>; + vsync-len = <10>; + }; + }; }; display@di1 { @@ -35,6 +49,25 @@ interface-pix-fmt = "rgb565"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ipu_disp2_1>; + status = "disabled"; + display-timings { + native-mode = <&timing1>; + timing1: claawvga { + clock-frequency = <27000000>; + hactive = <800>; + vactive = <480>; + hback-porch = <40>; + hfront-porch = <60>; + vback-porch = <10>; + vfront-porch = <10>; + hsync-len = <20>; + vsync-len = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; }; gpio-keys { @@ -95,7 +128,7 @@ &uart3 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart3_1>; + pinctrl-0 = <&pinctrl_uart3_1 &pinctrl_uart3_rtscts_1>; fsl,uart-has-rtscts; status = "okay"; }; @@ -252,7 +285,7 @@ &uart1 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1_1>; + pinctrl-0 = <&pinctrl_uart1_1 &pinctrl_uart1_rtscts_1>; fsl,uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 54cee651790..f4dcff3a996 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -86,6 +86,11 @@ interrupt-parent = <&tzic>; ranges; + iram: iram@1ffe0000 { + compatible = "mmio-sram"; + reg = <0x1ffe0000 0x20000>; + }; + ipu: ipu@40000000 { #crtc-cells = <1>; compatible = "fsl,imx51-ipu"; @@ -374,6 +379,14 @@ clocks = <&clks 107>; }; + owire: owire@83fa4000 { + compatible = "fsl,imx51-owire", "fsl,imx21-owire"; + reg = <0x83fa4000 0x4000>; + interrupts = <88>; + clocks = <&clks 159>; + status = "disabled"; + }; + ecspi2: ecspi@83fac000 { #address-cells = <1>; #size-cells = <0>; @@ -747,6 +760,11 @@ fsl,pins = < MX51_PAD_UART1_RXD__UART1_RXD 0x1c5 MX51_PAD_UART1_TXD__UART1_TXD 0x1c5 + >; + }; + + pinctrl_uart1_rtscts_1: uart1rtscts-1 { + fsl,pins = < MX51_PAD_UART1_RTS__UART1_RTS 0x1c5 MX51_PAD_UART1_CTS__UART1_CTS 0x1c5 >; @@ -767,6 +785,11 @@ fsl,pins = < MX51_PAD_EIM_D25__UART3_RXD 0x1c5 MX51_PAD_EIM_D26__UART3_TXD 0x1c5 + >; + }; + + pinctrl_uart3_rtscts_1: uart3rtscts-1 { + fsl,pins = < MX51_PAD_EIM_D27__UART3_RTS 0x1c5 MX51_PAD_EIM_D24__UART3_CTS 0x1c5 >; diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts index e97ddae09d7..91a5935a4aa 100644 --- a/arch/arm/boot/dts/imx53-qsb.dts +++ b/arch/arm/boot/dts/imx53-qsb.dts @@ -55,19 +55,20 @@ label = "Power Button"; gpios = <&gpio1 8 0>; linux,code = <116>; /* KEY_POWER */ - gpio-key,wakeup; }; volume-up { label = "Volume Up"; gpios = <&gpio2 14 0>; linux,code = <115>; /* KEY_VOLUMEUP */ + gpio-key,wakeup; }; volume-down { label = "Volume Down"; gpios = <&gpio2 15 0>; linux,code = <114>; /* KEY_VOLUMEDOWN */ + gpio-key,wakeup; }; }; @@ -122,7 +123,6 @@ &esdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1_1>; - cd-gpios = <&gpio3 13 0>; status = "okay"; }; @@ -136,6 +136,7 @@ pinctrl-0 = <&pinctrl_esdhc3_1>; cd-gpios = <&gpio3 11 0>; wp-gpios = <&gpio3 12 0>; + bus-width = <8>; status = "okay"; }; @@ -152,7 +153,6 @@ MX53_PAD_PATA_DATA15__GPIO2_15 0x80000000 MX53_PAD_EIM_DA11__GPIO3_11 0x80000000 MX53_PAD_EIM_DA12__GPIO3_12 0x80000000 - MX53_PAD_EIM_DA13__GPIO3_13 0x80000000 MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000 MX53_PAD_PATA_DA_2__GPIO7_8 0x80000000 MX53_PAD_GPIO_16__GPIO7_11 0x80000000 @@ -318,5 +318,6 @@ }; &usbotg { - status = "okay"; + dr_mode = "peripheral"; + status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-pinfunc.h b/arch/arm/boot/dts/imx6q-pinfunc.h index 9bbe82bdee4..97ed0816a6e 100644 --- a/arch/arm/boot/dts/imx6q-pinfunc.h +++ b/arch/arm/boot/dts/imx6q-pinfunc.h @@ -536,7 +536,7 @@ #define MX6QDL_PAD_ENET_REF_CLK__ESAI_RX_FS 0x1d4 0x4e8 0x85c 0x2 0x0 #define MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23 0x1d4 0x4e8 0x000 0x5 0x0 #define MX6QDL_PAD_ENET_REF_CLK__SPDIF_SR_CLK 0x1d4 0x4e8 0x000 0x6 0x0 -#define MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x1d8 0x4ec 0x000 0x0 0x0 +#define MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x1d8 0x4ec 0x004 0x0 0xff0d0100 #define MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1d8 0x4ec 0x000 0x1 0x0 #define MX6QDL_PAD_ENET_RX_ER__ESAI_RX_HF_CLK 0x1d8 0x4ec 0x864 0x2 0x0 #define MX6QDL_PAD_ENET_RX_ER__SPDIF_IN 0x1d8 0x4ec 0x914 0x3 0x1 @@ -654,7 +654,7 @@ #define MX6QDL_PAD_GPIO_1__ESAI_RX_CLK 0x224 0x5f4 0x86c 0x0 0x1 #define MX6QDL_PAD_GPIO_1__WDOG2_B 0x224 0x5f4 0x000 0x1 0x0 #define MX6QDL_PAD_GPIO_1__KEY_ROW5 0x224 0x5f4 0x8f4 0x2 0x0 -#define MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x224 0x5f4 0x000 0x3 0x0 +#define MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x224 0x5f4 0x004 0x3 0xff0d0101 #define MX6QDL_PAD_GPIO_1__PWM2_OUT 0x224 0x5f4 0x000 0x4 0x0 #define MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x224 0x5f4 0x000 0x5 0x0 #define MX6QDL_PAD_GPIO_1__SD1_CD_B 0x224 0x5f4 0x000 0x6 0x0 diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts index 3530280f515..f004913f7d8 100644 --- a/arch/arm/boot/dts/imx6q-sabrelite.dts +++ b/arch/arm/boot/dts/imx6q-sabrelite.dts @@ -65,8 +65,10 @@ }; }; -&sata { +&audmux { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux_1>; }; &ecspi1 { @@ -83,11 +85,29 @@ }; }; -&ssi1 { - fsl,mode = "i2s-slave"; +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet_1>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio3 23 0>; status = "okay"; }; +&i2c1 { + status = "okay"; + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_1>; + + codec: sgtl5000@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + clocks = <&clks 201>; + VDDA-supply = <®_2p5v>; + VDDIO-supply = <®_3p3v>; + }; +}; + &iomuxc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; @@ -103,28 +123,61 @@ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x80000000 MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1f0b0 MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x80000000 + MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000 >; }; }; }; -&usbotg { - vbus-supply = <®_usb_otg_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg_1>; - disable-over-current; +&ldb { + status = "okay"; + + lvds-channel@0 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + display-timings { + native-mode = <&timing0>; + timing0: hsd100pxn1 { + clock-frequency = <65000000>; + hactive = <1024>; + vactive = <768>; + hback-porch = <220>; + hfront-porch = <40>; + vback-porch = <21>; + vfront-porch = <7>; + hsync-len = <60>; + vsync-len = <10>; + }; + }; + }; +}; + +&sata { + status = "okay"; +}; + +&ssi1 { + fsl,mode = "i2s-slave"; status = "okay"; }; +&uart2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2_1>; +}; + &usbh1 { status = "okay"; }; -&fec { +&usbotg { + vbus-supply = <®_usb_otg_vbus>; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet_1>; - phy-mode = "rgmii"; - phy-reset-gpios = <&gpio3 23 0>; + pinctrl-0 = <&pinctrl_usbotg_1>; + disable-over-current; status = "okay"; }; @@ -145,30 +198,3 @@ vmmc-supply = <®_3p3v>; status = "okay"; }; - -&audmux { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_audmux_1>; -}; - -&uart2 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2_1>; -}; - -&i2c1 { - status = "okay"; - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1_1>; - - codec: sgtl5000@0a { - compatible = "fsl,sgtl5000"; - reg = <0x0a>; - clocks = <&clks 201>; - VDDA-supply = <®_2p5v>; - VDDIO-supply = <®_3p3v>; - }; -}; diff --git a/arch/arm/boot/dts/imx6q-udoo.dts b/arch/arm/boot/dts/imx6q-udoo.dts new file mode 100644 index 00000000000..6e1ccdc019a --- /dev/null +++ b/arch/arm/boot/dts/imx6q-udoo.dts @@ -0,0 +1,39 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * Author: Fabio Estevam <fabio.estevam@freescale.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +/dts-v1/; +#include "imx6q.dtsi" + +/ { + model = "Udoo i.MX6 Quad Board"; + compatible = "udoo,imx6q-udoo", "fsl,imx6q"; + + memory { + reg = <0x10000000 0x40000000>; + }; +}; + +&sata { + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2_1>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3_2>; + non-removable; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index 1cbbc5160d2..ff6f1e8f2dd 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -54,6 +54,7 @@ fsl,pins = < MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x80000000 MX6QDL_PAD_SD2_DAT2__GPIO1_IO13 0x80000000 + MX6QDL_PAD_GPIO_18__SD3_VSELECT 0x17059 >; }; }; @@ -74,8 +75,10 @@ }; &usdhc3 { - pinctrl-names = "default"; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc3_1>; + pinctrl-1 = <&pinctrl_usdhc3_1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_1_200mhz>; cd-gpios = <&gpio6 15 0>; wp-gpios = <&gpio1 13 0>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index 39eafc222a2..e75e11b36df 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -80,6 +80,14 @@ mux-int-port = <2>; mux-ext-port = <3>; }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + status = "okay"; + }; }; &audmux { @@ -108,6 +116,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet_1>; phy-mode = "rgmii"; + phy-reset-gpios = <&gpio1 25 0>; status = "okay"; }; @@ -172,6 +181,7 @@ MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x80000000 MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x80000000 >; }; }; @@ -202,6 +212,12 @@ }; }; +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_1>; + status = "okay"; +}; + &ssi2 { fsl,mode = "i2s-slave"; status = "okay"; @@ -229,6 +245,7 @@ &usdhc2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2_1>; + bus-width = <8>; cd-gpios = <&gpio2 2 0>; wp-gpios = <&gpio2 3 0>; status = "okay"; @@ -237,6 +254,7 @@ &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3_1>; + bus-width = <8>; cd-gpios = <&gpio2 0 0>; wp-gpios = <&gpio2 1 0>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi index a55113e65bc..35f54792916 100644 --- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi +++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi @@ -43,6 +43,13 @@ mux-int-port = <1>; mux-ext-port = <3>; }; + + sound-spdif { + compatible = "fsl,imx-audio-spdif"; + model = "imx-spdif"; + spdif-controller = <&spdif>; + spdif-out; + }; }; &audmux { @@ -81,6 +88,7 @@ MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* WL_REG_ON */ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* WL_HOST_WAKE */ MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* WL_WAKE */ + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x80000000 >; }; }; @@ -90,6 +98,13 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet_1>; phy-mode = "rgmii"; + phy-reset-gpios = <&gpio3 29 0>; + status = "okay"; +}; + +&spdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spdif_3>; status = "okay"; }; @@ -115,6 +130,14 @@ status = "okay"; }; +&usbotg { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg_1>; + disable-over-current; + dr_mode = "peripheral"; + status = "okay"; +}; + &usdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1_2>; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index ccd55c2fdb6..59154dc15fe 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -116,6 +116,22 @@ arm,data-latency = <4 2 3>; }; + pcie: pcie@0x01000000 { + compatible = "fsl,imx6q-pcie", "snps,dw-pcie"; + reg = <0x01ffc000 0x4000>; /* DBI */ + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x00000800 0 0x01f00000 0x01f00000 0 0x00080000 /* configuration space */ + 0x81000000 0 0 0x01f80000 0 0x00010000 /* downstream I/O */ + 0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */ + num-lanes = <1>; + interrupts = <0 123 0x04>; + clocks = <&clks 189>, <&clks 187>, <&clks 206>, <&clks 144>; + clock-names = "pcie_ref_125m", "sata_ref_100m", "lvds_gate", "pcie_axi"; + status = "disabled"; + }; + pmu { compatible = "arm,cortex-a9-pmu"; interrupts = <0 94 0x04>; @@ -136,8 +152,23 @@ ranges; spdif: spdif@02004000 { + compatible = "fsl,imx35-spdif"; reg = <0x02004000 0x4000>; interrupts = <0 52 0x04>; + dmas = <&sdma 14 18 0>, + <&sdma 15 18 0>; + dma-names = "rx", "tx"; + clocks = <&clks 197>, <&clks 3>, + <&clks 197>, <&clks 107>, + <&clks 0>, <&clks 118>, + <&clks 62>, <&clks 139>, + <&clks 0>; + clock-names = "core", "rxtx0", + "rxtx1", "rxtx2", + "rxtx3", "rxtx4", + "rxtx5", "rxtx6", + "rxtx7"; + status = "disabled"; }; ecspi1: ecspi@02008000 { @@ -1010,6 +1041,12 @@ MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0 >; }; + + pinctrl_spdif_3: spdifgrp-3 { + fsl,pins = < + MX6QDL_PAD_ENET_RXD0__SPDIF_OUT 0x1b0b0 + >; + }; }; uart1 { @@ -1184,6 +1221,36 @@ >; }; + pinctrl_usdhc3_1_100mhz: usdhc3grp-1-100mhz { /* 100Mhz */ + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170b9 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170b9 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170b9 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170b9 + >; + }; + + pinctrl_usdhc3_1_200mhz: usdhc3grp-1-200mhz { /* 200Mhz */ + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170f9 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170f9 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170f9 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170f9 + >; + }; + pinctrl_usdhc3_2: usdhc3grp-2 { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts index 2886a590823..cc68e19c516 100644 --- a/arch/arm/boot/dts/imx6sl-evk.dts +++ b/arch/arm/boot/dts/imx6sl-evk.dts @@ -17,6 +17,44 @@ memory { reg = <0x80000000 0x40000000>; }; + + regulators { + compatible = "simple-bus"; + + reg_usb_otg1_vbus: usb_otg1_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 0 0>; + enable-active-high; + }; + + reg_usb_otg2_vbus: usb_otg2_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg2_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 2 0>; + enable-active-high; + }; + }; +}; + +&ecspi1 { + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio4 11 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1_1>; + status = "okay"; + + flash: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p32"; + spi-max-frequency = <20000000>; + reg = <0>; + }; }; &fec { @@ -38,6 +76,8 @@ MX6SL_PAD_SD2_DAT7__GPIO5_IO00 0x17059 MX6SL_PAD_SD2_DAT6__GPIO4_IO29 0x17059 MX6SL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059 + MX6SL_PAD_KEY_COL4__GPIO4_IO00 0x80000000 + MX6SL_PAD_KEY_COL5__GPIO4_IO02 0x80000000 >; }; }; @@ -49,9 +89,26 @@ status = "okay"; }; -&usdhc1 { +&usbotg1 { + vbus-supply = <®_usb_otg1_vbus>; pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1_1>; + disable-over-current; + status = "okay"; +}; + +&usbotg2 { + vbus-supply = <®_usb_otg2_vbus>; + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc1_1>; + pinctrl-1 = <&pinctrl_usdhc1_1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_1_200mhz>; bus-width = <8>; cd-gpios = <&gpio4 7 0>; wp-gpios = <&gpio4 6 0>; @@ -59,16 +116,20 @@ }; &usdhc2 { - pinctrl-names = "default"; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc2_1>; + pinctrl-1 = <&pinctrl_usdhc2_1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_1_200mhz>; cd-gpios = <&gpio5 0 0>; wp-gpios = <&gpio4 29 0>; status = "okay"; }; &usdhc3 { - pinctrl-names = "default"; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc3_1>; + pinctrl-1 = <&pinctrl_usdhc3_1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_1_200mhz>; cd-gpios = <&gpio3 22 0>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index c46651e4d96..28558f1aaf2 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -13,16 +13,20 @@ / { aliases { - serial0 = &uart1; - serial1 = &uart2; - serial2 = &uart3; - serial3 = &uart4; - serial4 = &uart5; gpio0 = &gpio1; gpio1 = &gpio2; gpio2 = &gpio3; gpio3 = &gpio4; gpio4 = &gpio5; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + spi0 = &ecspi1; + spi1 = &ecspi2; + spi2 = &ecspi3; + spi3 = &ecspi4; }; cpus { @@ -380,7 +384,9 @@ }; anatop: anatop@020c8000 { - compatible = "fsl,imx6sl-anatop", "syscon", "simple-bus"; + compatible = "fsl,imx6sl-anatop", + "fsl,imx6q-anatop", + "syscon", "simple-bus"; reg = <0x020c8000 0x1000>; interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>; @@ -528,10 +534,26 @@ interrupts = <0 89 0x04>; }; + gpr: iomuxc-gpr@020e0000 { + compatible = "fsl,imx6sl-iomuxc-gpr", + "fsl,imx6q-iomuxc-gpr", "syscon"; + reg = <0x020e0000 0x38>; + }; + iomuxc: iomuxc@020e0000 { compatible = "fsl,imx6sl-iomuxc"; reg = <0x020e0000 0x4000>; + ecspi1 { + pinctrl_ecspi1_1: ecspi1grp-1 { + fsl,pins = < + MX6SL_PAD_ECSPI1_MISO__ECSPI1_MISO 0x100b1 + MX6SL_PAD_ECSPI1_MOSI__ECSPI1_MOSI 0x100b1 + MX6SL_PAD_ECSPI1_SCLK__ECSPI1_SCLK 0x100b1 + >; + }; + }; + fec { pinctrl_fec_1: fecgrp-1 { fsl,pins = < @@ -557,6 +579,64 @@ }; }; + usbotg1 { + pinctrl_usbotg1_1: usbotg1grp-1 { + fsl,pins = < + MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID 0x17059 + >; + }; + + pinctrl_usbotg1_2: usbotg1grp-2 { + fsl,pins = < + MX6SL_PAD_FEC_RXD0__USB_OTG1_ID 0x17059 + >; + }; + + pinctrl_usbotg1_3: usbotg1grp-3 { + fsl,pins = < + MX6SL_PAD_LCD_DAT1__USB_OTG1_ID 0x17059 + >; + }; + + pinctrl_usbotg1_4: usbotg1grp-4 { + fsl,pins = < + MX6SL_PAD_REF_CLK_32K__USB_OTG1_ID 0x17059 + >; + }; + + pinctrl_usbotg1_5: usbotg1grp-5 { + fsl,pins = < + MX6SL_PAD_SD3_DAT0__USB_OTG1_ID 0x17059 + >; + }; + }; + + usbotg2 { + pinctrl_usbotg2_1: usbotg2grp-1 { + fsl,pins = < + MX6SL_PAD_ECSPI1_SCLK__USB_OTG2_OC 0x17059 + >; + }; + + pinctrl_usbotg2_2: usbotg2grp-2 { + fsl,pins = < + MX6SL_PAD_ECSPI2_SCLK__USB_OTG2_OC 0x17059 + >; + }; + + pinctrl_usbotg2_3: usbotg2grp-3 { + fsl,pins = < + MX6SL_PAD_KEY_ROW5__USB_OTG2_OC 0x17059 + >; + }; + + pinctrl_usbotg2_4: usbotg2grp-4 { + fsl,pins = < + MX6SL_PAD_SD3_DAT2__USB_OTG2_OC 0x17059 + >; + }; + }; + usdhc1 { pinctrl_usdhc1_1: usdhc1grp-1 { fsl,pins = < @@ -572,6 +652,38 @@ MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x17059 >; }; + + pinctrl_usdhc1_1_100mhz: usdhc1grp-1-100mhz { + fsl,pins = < + MX6SL_PAD_SD1_CMD__SD1_CMD 0x170b9 + MX6SL_PAD_SD1_CLK__SD1_CLK 0x100b9 + MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x170b9 + MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x170b9 + MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x170b9 + MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x170b9 + MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x170b9 + MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x170b9 + MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x170b9 + MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x170b9 + >; + }; + + pinctrl_usdhc1_1_200mhz: usdhc1grp-1-200mhz { + fsl,pins = < + MX6SL_PAD_SD1_CMD__SD1_CMD 0x170f9 + MX6SL_PAD_SD1_CLK__SD1_CLK 0x100f9 + MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x170f9 + MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x170f9 + MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x170f9 + MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x170f9 + MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x170f9 + MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x170f9 + MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x170f9 + MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x170f9 + >; + }; + + }; usdhc2 { @@ -585,6 +697,29 @@ MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x17059 >; }; + + pinctrl_usdhc2_1_100mhz: usdhc2grp-1-100mhz { + fsl,pins = < + MX6SL_PAD_SD2_CMD__SD2_CMD 0x170b9 + MX6SL_PAD_SD2_CLK__SD2_CLK 0x100b9 + MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x170b9 + MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x170b9 + MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x170b9 + MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc2_1_200mhz: usdhc2grp-1-200mhz { + fsl,pins = < + MX6SL_PAD_SD2_CMD__SD2_CMD 0x170f9 + MX6SL_PAD_SD2_CLK__SD2_CLK 0x100f9 + MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x170f9 + MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x170f9 + MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x170f9 + MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x170f9 + >; + }; + }; usdhc3 { @@ -598,6 +733,28 @@ MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x17059 >; }; + + pinctrl_usdhc3_1_100mhz: usdhc3grp-1-100mhz { + fsl,pins = < + MX6SL_PAD_SD3_CMD__SD3_CMD 0x170b9 + MX6SL_PAD_SD3_CLK__SD3_CLK 0x100b9 + MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 + MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 + MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 + MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc3_1_200mhz: usdhc3grp-1-200mhz { + fsl,pins = < + MX6SL_PAD_SD3_CMD__SD3_CMD 0x170f9 + MX6SL_PAD_SD3_CLK__SD3_CLK 0x100f9 + MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 + MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 + MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 + MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 + >; + }; }; }; @@ -619,7 +776,8 @@ <&clks IMX6SL_CLK_SDMA>; clock-names = "ipg", "ahb"; #dma-cells = <3>; - fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6sl.bin"; + /* imx6sl reuses imx6q sdma firmware */ + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin"; }; pxp: pxp@020f0000 { @@ -663,7 +821,7 @@ usbotg2: usb@02184200 { compatible = "fsl,imx6sl-usb", "fsl,imx27-usb"; reg = <0x02184200 0x200>; - interrupts = <0 40 0x04>; + interrupts = <0 42 0x04>; clocks = <&clks IMX6SL_CLK_USBOH3>; fsl,usbphy = <&usbphy2>; fsl,usbmisc = <&usbmisc 1>; @@ -673,7 +831,7 @@ usbh: usb@02184400 { compatible = "fsl,imx6sl-usb", "fsl,imx27-usb"; reg = <0x02184400 0x200>; - interrupts = <0 42 0x04>; + interrupts = <0 40 0x04>; clocks = <&clks IMX6SL_CLK_USBOH3>; fsl,usbmisc = <&usbmisc 2>; status = "disabled"; diff --git a/arch/arm/boot/dts/integrator.dtsi b/arch/arm/boot/dts/integrator.dtsi index 813b91d7bea..0f06f8687b0 100644 --- a/arch/arm/boot/dts/integrator.dtsi +++ b/arch/arm/boot/dts/integrator.dtsi @@ -5,6 +5,11 @@ /include/ "skeleton.dtsi" / { + core-module@10000000 { + compatible = "arm,core-module-integrator"; + reg = <0x10000000 0x200>; + }; + timer@13000000 { reg = <0x13000000 0x100>; interrupt-parent = <&pic>; diff --git a/arch/arm/boot/dts/integratorap.dts b/arch/arm/boot/dts/integratorap.dts index b6b82eca8d1..e6be9315ff0 100644 --- a/arch/arm/boot/dts/integratorap.dts +++ b/arch/arm/boot/dts/integratorap.dts @@ -19,8 +19,11 @@ }; syscon { - /* AP system controller registers */ + compatible = "arm,integrator-ap-syscon"; reg = <0x11000000 0x100>; + interrupt-parent = <&pic>; + /* These are the logical module IRQs */ + interrupts = <9>, <10>, <11>, <12>; }; timer0: timer@13000000 { diff --git a/arch/arm/boot/dts/integratorcp.dts b/arch/arm/boot/dts/integratorcp.dts index ff1aea0ee04..7deb3a3182b 100644 --- a/arch/arm/boot/dts/integratorcp.dts +++ b/arch/arm/boot/dts/integratorcp.dts @@ -9,29 +9,28 @@ model = "ARM Integrator/CP"; compatible = "arm,integrator-cp"; - aliases { - arm,timer-primary = &timer2; - arm,timer-secondary = &timer1; - }; - chosen { bootargs = "root=/dev/ram0 console=ttyAMA0,38400n8 earlyprintk"; }; - cpcon { - /* CP controller registers */ + syscon { + compatible = "arm,integrator-cp-syscon"; reg = <0xcb000000 0x100>; }; timer0: timer@13000000 { + /* TIMER0 runs @ 25MHz */ compatible = "arm,integrator-cp-timer"; + status = "disabled"; }; timer1: timer@13000100 { + /* TIMER1 runs @ 1MHz */ compatible = "arm,integrator-cp-timer"; }; timer2: timer@13000200 { + /* TIMER2 runs @ 1MHz */ compatible = "arm,integrator-cp-timer"; }; diff --git a/arch/arm/boot/dts/keystone-clocks.dtsi b/arch/arm/boot/dts/keystone-clocks.dtsi new file mode 100644 index 00000000000..d6713b11325 --- /dev/null +++ b/arch/arm/boot/dts/keystone-clocks.dtsi @@ -0,0 +1,821 @@ +/* + * Device Tree Source for Keystone 2 clock tree + * + * Copyright (C) 2013 Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + refclkmain: refclkmain { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <122880000>; + clock-output-names = "refclk-main"; + }; + + mainpllclk: mainpllclk@2310110 { + #clock-cells = <0>; + compatible = "ti,keystone,main-pll-clock"; + clocks = <&refclkmain>; + reg = <0x02620350 4>, <0x02310110 4>; + reg-names = "control", "multiplier"; + fixed-postdiv = <2>; + }; + + papllclk: papllclk@2620358 { + #clock-cells = <0>; + compatible = "ti,keystone,pll-clock"; + clocks = <&refclkmain>; + clock-output-names = "pa-pll-clk"; + reg = <0x02620358 4>; + reg-names = "control"; + fixed-postdiv = <6>; + }; + + ddr3allclk: ddr3apllclk@2620360 { + #clock-cells = <0>; + compatible = "ti,keystone,pll-clock"; + clocks = <&refclkmain>; + clock-output-names = "ddr-3a-pll-clk"; + reg = <0x02620360 4>; + reg-names = "control"; + fixed-postdiv = <6>; + }; + + ddr3bllclk: ddr3bpllclk@2620368 { + #clock-cells = <0>; + compatible = "ti,keystone,pll-clock"; + clocks = <&refclkmain>; + clock-output-names = "ddr-3b-pll-clk"; + reg = <0x02620368 4>; + reg-names = "control"; + fixed-postdiv = <6>; + }; + + armpllclk: armpllclk@2620370 { + #clock-cells = <0>; + compatible = "ti,keystone,pll-clock"; + clocks = <&refclkmain>; + clock-output-names = "arm-pll-clk"; + reg = <0x02620370 4>; + reg-names = "control"; + fixed-postdiv = <6>; + }; + + mainmuxclk: mainmuxclk@2310108 { + #clock-cells = <0>; + compatible = "ti,keystone,pll-mux-clock"; + clocks = <&mainpllclk>, <&refclkmain>; + reg = <0x02310108 4>; + bit-shift = <23>; + bit-mask = <1>; + clock-output-names = "mainmuxclk"; + }; + + chipclk1: chipclk1 { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&mainmuxclk>; + clock-div = <1>; + clock-mult = <1>; + clock-output-names = "chipclk1"; + }; + + chipclk1rstiso: chipclk1rstiso { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&mainmuxclk>; + clock-div = <1>; + clock-mult = <1>; + clock-output-names = "chipclk1rstiso"; + }; + + gemtraceclk: gemtraceclk@2310120 { + #clock-cells = <0>; + compatible = "ti,keystone,pll-divider-clock"; + clocks = <&mainmuxclk>; + reg = <0x02310120 4>; + bit-shift = <0>; + bit-mask = <8>; + clock-output-names = "gemtraceclk"; + }; + + chipstmxptclk: chipstmxptclk { + #clock-cells = <0>; + compatible = "ti,keystone,pll-divider-clock"; + clocks = <&mainmuxclk>; + reg = <0x02310164 4>; + bit-shift = <0>; + bit-mask = <8>; + clock-output-names = "chipstmxptclk"; + }; + + chipclk12: chipclk12 { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&chipclk1>; + clock-div = <2>; + clock-mult = <1>; + clock-output-names = "chipclk12"; + }; + + chipclk13: chipclk13 { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&chipclk1>; + clock-div = <3>; + clock-mult = <1>; + clock-output-names = "chipclk13"; + }; + + chipclk14: chipclk14 { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&chipclk1>; + clock-div = <4>; + clock-mult = <1>; + clock-output-names = "chipclk14"; + }; + + chipclk16: chipclk16 { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&chipclk1>; + clock-div = <6>; + clock-mult = <1>; + clock-output-names = "chipclk16"; + }; + + chipclk112: chipclk112 { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&chipclk1>; + clock-div = <12>; + clock-mult = <1>; + clock-output-names = "chipclk112"; + }; + + chipclk124: chipclk124 { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&chipclk1>; + clock-div = <24>; + clock-mult = <1>; + clock-output-names = "chipclk114"; + }; + + chipclk1rstiso13: chipclk1rstiso13 { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&chipclk1rstiso>; + clock-div = <3>; + clock-mult = <1>; + clock-output-names = "chipclk1rstiso13"; + }; + + chipclk1rstiso14: chipclk1rstiso14 { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&chipclk1rstiso>; + clock-div = <4>; + clock-mult = <1>; + clock-output-names = "chipclk1rstiso14"; + }; + + chipclk1rstiso16: chipclk1rstiso16 { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&chipclk1rstiso>; + clock-div = <6>; + clock-mult = <1>; + clock-output-names = "chipclk1rstiso16"; + }; + + chipclk1rstiso112: chipclk1rstiso112 { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&chipclk1rstiso>; + clock-div = <12>; + clock-mult = <1>; + clock-output-names = "chipclk1rstiso112"; + }; + + clkmodrst0: clkmodrst0 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk16>; + clock-output-names = "modrst0"; + reg = <0x02350000 0xb00>, <0x02350000 0x400>; + reg-names = "control", "domain"; + domain-id = <0>; + }; + + + clkusb: clkusb { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk16>; + clock-output-names = "usb"; + reg = <0x02350008 0xb00>, <0x02350000 0x400>; + reg-names = "control", "domain"; + domain-id = <0>; + }; + + clkaemifspi: clkaemifspi { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk16>; + clock-output-names = "aemif-spi"; + reg = <0x0235000c 0xb00>, <0x02350000 0x400>; + reg-names = "control", "domain"; + domain-id = <0>; + }; + + + clkdebugsstrc: clkdebugsstrc { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk13>; + clock-output-names = "debugss-trc"; + reg = <0x02350014 0xb00>, <0x02350000 0x400>; + reg-names = "control", "domain"; + domain-id = <0>; + }; + + clktetbtrc: clktetbtrc { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk13>; + clock-output-names = "tetb-trc"; + reg = <0x02350018 0xb00>, <0x02350004 0x400>; + reg-names = "control", "domain"; + domain-id = <1>; + }; + + clkpa: clkpa { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk16>; + clock-output-names = "pa"; + reg = <0x0235001c 0xb00>, <0x02350008 0x400>; + reg-names = "control", "domain"; + domain-id = <2>; + }; + + clkcpgmac: clkcpgmac { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&clkpa>; + clock-output-names = "cpgmac"; + reg = <0x02350020 0xb00>, <0x02350008 0x400>; + reg-names = "control", "domain"; + domain-id = <2>; + }; + + clksa: clksa { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&clkpa>; + clock-output-names = "sa"; + reg = <0x02350024 0xb00>, <0x02350008 0x400>; + reg-names = "control", "domain"; + domain-id = <2>; + }; + + clkpcie: clkpcie { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk12>; + clock-output-names = "pcie"; + reg = <0x02350028 0xb00>, <0x0235000c 0x400>; + reg-names = "control", "domain"; + domain-id = <3>; + }; + + clksrio: clksrio { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk1rstiso13>; + clock-output-names = "srio"; + reg = <0x0235002c 0xb00>, <0x02350010 0x400>; + reg-names = "control", "domain"; + domain-id = <4>; + }; + + clkhyperlink0: clkhyperlink0 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk12>; + clock-output-names = "hyperlink-0"; + reg = <0x02350030 0xb00>, <0x02350014 0x400>; + reg-names = "control", "domain"; + domain-id = <5>; + }; + + clksr: clksr { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk1rstiso112>; + clock-output-names = "sr"; + reg = <0x02350034 0xb00>, <0x02350018 0x400>; + reg-names = "control", "domain"; + domain-id = <6>; + }; + + clkmsmcsram: clkmsmcsram { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk1>; + clock-output-names = "msmcsram"; + reg = <0x02350038 0xb00>, <0x0235001c 0x400>; + reg-names = "control", "domain"; + domain-id = <7>; + }; + + clkgem0: clkgem0 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk1>; + clock-output-names = "gem0"; + reg = <0x0235003c 0xb00>, <0x02350020 0x400>; + reg-names = "control", "domain"; + domain-id = <8>; + }; + + clkgem1: clkgem1 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk1>; + clock-output-names = "gem1"; + reg = <0x02350040 0xb00>, <0x02350024 0x400>; + reg-names = "control", "domain"; + domain-id = <9>; + }; + + clkgem2: clkgem2 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk1>; + clock-output-names = "gem2"; + reg = <0x02350044 0xb00>, <0x02350028 0x400>; + reg-names = "control", "domain"; + domain-id = <10>; + }; + + clkgem3: clkgem3 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk1>; + clock-output-names = "gem3"; + reg = <0x02350048 0xb00>, <0x0235002c 0x400>; + reg-names = "control", "domain"; + domain-id = <11>; + }; + + clkgem4: clkgem4 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk1>; + clock-output-names = "gem4"; + reg = <0x0235004c 0xb00>, <0x02350030 0x400>; + reg-names = "control", "domain"; + domain-id = <12>; + }; + + clkgem5: clkgem5 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk1>; + clock-output-names = "gem5"; + reg = <0x02350050 0xb00>, <0x02350034 0x400>; + reg-names = "control", "domain"; + domain-id = <13>; + }; + + clkgem6: clkgem6 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk1>; + clock-output-names = "gem6"; + reg = <0x02350054 0xb00>, <0x02350038 0x400>; + reg-names = "control", "domain"; + domain-id = <14>; + }; + + clkgem7: clkgem7 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk1>; + clock-output-names = "gem7"; + reg = <0x02350058 0xb00>, <0x0235003c 0x400>; + reg-names = "control", "domain"; + domain-id = <15>; + }; + + clkddr30: clkddr30 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk12>; + clock-output-names = "ddr3-0"; + reg = <0x0235005c 0xb00>, <0x02350040 0x400>; + reg-names = "control", "domain"; + domain-id = <16>; + }; + + clkddr31: clkddr31 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk13>; + clock-output-names = "ddr3-1"; + reg = <0x02350060 0xb00>, <0x02350040 0x400>; + reg-names = "control", "domain"; + domain-id = <16>; + }; + + clktac: clktac { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk13>; + clock-output-names = "tac"; + reg = <0x02350064 0xb00>, <0x02350044 0x400>; + reg-names = "control", "domain"; + domain-id = <17>; + }; + + clkrac01: clktac01 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk13>; + clock-output-names = "rac-01"; + reg = <0x02350068 0xb00>, <0x02350044 0x400>; + reg-names = "control", "domain"; + domain-id = <17>; + }; + + clkrac23: clktac23 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk13>; + clock-output-names = "rac-23"; + reg = <0x0235006c 0xb00>, <0x02350048 0x400>; + reg-names = "control", "domain"; + domain-id = <18>; + }; + + clkfftc0: clkfftc0 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk13>; + clock-output-names = "fftc-0"; + reg = <0x02350070 0xb00>, <0x0235004c 0x400>; + reg-names = "control", "domain"; + domain-id = <19>; + }; + + clkfftc1: clkfftc1 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk13>; + clock-output-names = "fftc-1"; + reg = <0x02350074 0xb00>, <0x023504c0 0x400>; + reg-names = "control", "domain"; + domain-id = <19>; + }; + + clkfftc2: clkfftc2 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk13>; + clock-output-names = "fftc-2"; + reg = <0x02350078 0xb00>, <0x02350050 0x400>; + reg-names = "control", "domain"; + domain-id = <20>; + }; + + clkfftc3: clkfftc3 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk13>; + clock-output-names = "fftc-3"; + reg = <0x0235007c 0xb00>, <0x02350050 0x400>; + reg-names = "control", "domain"; + domain-id = <20>; + }; + + clkfftc4: clkfftc4 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk13>; + clock-output-names = "fftc-4"; + reg = <0x02350080 0xb00>, <0x02350050 0x400>; + reg-names = "control", "domain"; + domain-id = <20>; + }; + + clkfftc5: clkfftc5 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk13>; + clock-output-names = "fftc-5"; + reg = <0x02350084 0xb00>, <0x02350050 0x400>; + reg-names = "control", "domain"; + domain-id = <20>; + }; + + clkaif: clkaif { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk13>; + clock-output-names = "aif"; + reg = <0x02350088 0xb00>, <0x02350054 0x400>; + reg-names = "control", "domain"; + domain-id = <21>; + }; + + clktcp3d0: clktcp3d0 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk13>; + clock-output-names = "tcp3d-0"; + reg = <0x0235008c 0xb00>, <0x02350058 0x400>; + reg-names = "control", "domain"; + domain-id = <22>; + }; + + clktcp3d1: clktcp3d1 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk13>; + clock-output-names = "tcp3d-1"; + reg = <0x02350090 0xb00>, <0x02350058 0x400>; + reg-names = "control", "domain"; + domain-id = <22>; + }; + + clktcp3d2: clktcp3d2 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk13>; + clock-output-names = "tcp3d-2"; + reg = <0x02350094 0xb00>, <0x0235005c 0x400>; + reg-names = "control", "domain"; + domain-id = <23>; + }; + + clktcp3d3: clktcp3d3 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk13>; + clock-output-names = "tcp3d-3"; + reg = <0x02350098 0xb00>, <0x0235005c 0x400>; + reg-names = "control", "domain"; + domain-id = <23>; + }; + + clkvcp0: clkvcp0 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk13>; + clock-output-names = "vcp-0"; + reg = <0x0235009c 0xb00>, <0x02350060 0x400>; + reg-names = "control", "domain"; + domain-id = <24>; + }; + + clkvcp1: clkvcp1 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk13>; + clock-output-names = "vcp-1"; + reg = <0x023500a0 0xb00>, <0x02350060 0x400>; + reg-names = "control", "domain"; + domain-id = <24>; + }; + + clkvcp2: clkvcp2 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk13>; + clock-output-names = "vcp-2"; + reg = <0x023500a4 0xb00>, <0x02350060 0x400>; + reg-names = "control", "domain"; + domain-id = <24>; + }; + + clkvcp3: clkvcp3 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk13>; + clock-output-names = "vcp-3"; + reg = <0x0235000a8 0xb00>, <0x02350060 0x400>; + reg-names = "control", "domain"; + domain-id = <24>; + }; + + clkvcp4: clkvcp4 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk13>; + clock-output-names = "vcp-4"; + reg = <0x023500ac 0xb00>, <0x02350064 0x400>; + reg-names = "control", "domain"; + domain-id = <25>; + }; + + clkvcp5: clkvcp5 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk13>; + clock-output-names = "vcp-5"; + reg = <0x023500b0 0xb00>, <0x02350064 0x400>; + reg-names = "control", "domain"; + domain-id = <25>; + }; + + clkvcp6: clkvcp6 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk13>; + clock-output-names = "vcp-6"; + reg = <0x023500b4 0xb00>, <0x02350064 0x400>; + reg-names = "control", "domain"; + domain-id = <25>; + }; + + clkvcp7: clkvcp7 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk13>; + clock-output-names = "vcp-7"; + reg = <0x023500b8 0xb00>, <0x02350064 0x400>; + reg-names = "control", "domain"; + domain-id = <25>; + }; + + clkbcp: clkbcp { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk13>; + clock-output-names = "bcp"; + reg = <0x023500bc 0xb00>, <0x02350068 0x400>; + reg-names = "control", "domain"; + domain-id = <26>; + }; + + clkdxb: clkdxb { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk13>; + clock-output-names = "dxb"; + reg = <0x023500c0 0xb00>, <0x0235006c 0x400>; + reg-names = "control", "domain"; + domain-id = <27>; + }; + + clkhyperlink1: clkhyperlink1 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk12>; + clock-output-names = "hyperlink-1"; + reg = <0x023500c4 0xb00>, <0x02350070 0x400>; + reg-names = "control", "domain"; + domain-id = <28>; + }; + + clkxge: clkxge { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk13>; + clock-output-names = "xge"; + reg = <0x023500c8 0xb00>, <0x02350074 0x400>; + reg-names = "control", "domain"; + domain-id = <29>; + }; + + clkwdtimer0: clkwdtimer0 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&clkmodrst0>; + clock-output-names = "timer0"; + reg = <0x02350000 0xb00>, <0x02350000 0x400>; + reg-names = "control", "domain"; + domain-id = <0>; + }; + + clkwdtimer1: clkwdtimer1 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&clkmodrst0>; + clock-output-names = "timer1"; + reg = <0x02350000 0xb00>, <0x02350000 0x400>; + reg-names = "control", "domain"; + domain-id = <0>; + }; + + clkwdtimer2: clkwdtimer2 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&clkmodrst0>; + clock-output-names = "timer2"; + reg = <0x02350000 0xb00>, <0x02350000 0x400>; + reg-names = "control", "domain"; + domain-id = <0>; + }; + + clkwdtimer3: clkwdtimer3 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&clkmodrst0>; + clock-output-names = "timer3"; + reg = <0x02350000 0xb00>, <0x02350000 0x400>; + reg-names = "control", "domain"; + domain-id = <0>; + }; + + clkuart0: clkuart0 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&clkmodrst0>; + clock-output-names = "uart0"; + reg = <0x02350000 0xb00>, <0x02350000 0x400>; + reg-names = "control", "domain"; + domain-id = <0>; + }; + + clkuart1: clkuart1 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&clkmodrst0>; + clock-output-names = "uart1"; + reg = <0x02350000 0xb00>, <0x02350000 0x400>; + reg-names = "control", "domain"; + domain-id = <0>; + }; + + clkaemif: clkaemif { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&clkaemifspi>; + clock-output-names = "aemif"; + reg = <0x02350000 0xb00>, <0x02350000 0x400>; + reg-names = "control", "domain"; + domain-id = <0>; + }; + + clkusim: clkusim { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&clkmodrst0>; + clock-output-names = "usim"; + reg = <0x02350000 0xb00>, <0x02350000 0x400>; + reg-names = "control", "domain"; + domain-id = <0>; + }; + + clki2c: clki2c { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&clkmodrst0>; + clock-output-names = "i2c"; + reg = <0x02350000 0xb00>, <0x02350000 0x400>; + reg-names = "control", "domain"; + domain-id = <0>; + }; + + clkspi: clkspi { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&clkaemifspi>; + clock-output-names = "spi"; + reg = <0x02350000 0xb00>, <0x02350000 0x400>; + reg-names = "control", "domain"; + domain-id = <0>; + }; + + clkgpio: clkgpio { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&clkmodrst0>; + clock-output-names = "gpio"; + reg = <0x02350000 0xb00>, <0x02350000 0x400>; + reg-names = "control", "domain"; + domain-id = <0>; + }; + + clkkeymgr: clkkeymgr { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&clkmodrst0>; + clock-output-names = "keymgr"; + reg = <0x02350000 0xb00>, <0x02350000 0x400>; + reg-names = "control", "domain"; + domain-id = <0>; + }; +}; diff --git a/arch/arm/boot/dts/keystone.dts b/arch/arm/boot/dts/keystone.dts index a68e34bbecb..100bdf52b84 100644 --- a/arch/arm/boot/dts/keystone.dts +++ b/arch/arm/boot/dts/keystone.dts @@ -100,13 +100,15 @@ reg = <0x023100e8 4>; /* pll reset control reg */ }; + /include/ "keystone-clocks.dtsi" + uart0: serial@02530c00 { compatible = "ns16550a"; current-speed = <115200>; reg-shift = <2>; reg-io-width = <4>; reg = <0x02530c00 0x100>; - clock-frequency = <133120000>; + clocks = <&clkuart0>; interrupts = <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>; }; @@ -116,9 +118,66 @@ reg-shift = <2>; reg-io-width = <4>; reg = <0x02531000 0x100>; - clock-frequency = <133120000>; + clocks = <&clkuart1>; interrupts = <GIC_SPI 280 IRQ_TYPE_EDGE_RISING>; }; + i2c0: i2c@2530000 { + compatible = "ti,davinci-i2c"; + reg = <0x02530000 0x400>; + clock-frequency = <100000>; + clocks = <&clki2c>; + interrupts = <GIC_SPI 283 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + + dtt@50 { + compatible = "at,24c1024"; + reg = <0x50>; + }; + }; + + i2c1: i2c@2530400 { + compatible = "ti,davinci-i2c"; + reg = <0x02530400 0x400>; + clock-frequency = <100000>; + clocks = <&clki2c>; + interrupts = <GIC_SPI 286 IRQ_TYPE_EDGE_RISING>; + }; + + i2c2: i2c@2530800 { + compatible = "ti,davinci-i2c"; + reg = <0x02530800 0x400>; + clock-frequency = <100000>; + clocks = <&clki2c>; + interrupts = <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>; + }; + + spi0: spi@21000400 { + compatible = "ti,dm6441-spi"; + reg = <0x21000400 0x200>; + num-cs = <4>; + ti,davinci-spi-intr-line = <0>; + interrupts = <GIC_SPI 292 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkspi>; + }; + + spi1: spi@21000600 { + compatible = "ti,dm6441-spi"; + reg = <0x21000600 0x200>; + num-cs = <4>; + ti,davinci-spi-intr-line = <0>; + interrupts = <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkspi>; + }; + + spi2: spi@21000800 { + compatible = "ti,dm6441-spi"; + reg = <0x21000800 0x200>; + num-cs = <4>; + ti,davinci-spi-intr-line = <0>; + interrupts = <GIC_SPI 300 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkspi>; + }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-db-88f6281.dts b/arch/arm/boot/dts/kirkwood-db-88f6281.dts index 72c4b0a0366..c39dd766c75 100644 --- a/arch/arm/boot/dts/kirkwood-db-88f6281.dts +++ b/arch/arm/boot/dts/kirkwood-db-88f6281.dts @@ -19,7 +19,6 @@ compatible = "marvell,db-88f6281-bp", "marvell,kirkwood-88f6281", "marvell,kirkwood"; mbus { - ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>; pcie-controller { status = "okay"; diff --git a/arch/arm/boot/dts/kirkwood-db-88f6282.dts b/arch/arm/boot/dts/kirkwood-db-88f6282.dts index 36c411d3492..701c6b6cdaa 100644 --- a/arch/arm/boot/dts/kirkwood-db-88f6282.dts +++ b/arch/arm/boot/dts/kirkwood-db-88f6282.dts @@ -19,7 +19,6 @@ compatible = "marvell,db-88f6282-bp", "marvell,kirkwood-88f6282", "marvell,kirkwood"; mbus { - ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>; pcie-controller { status = "okay"; diff --git a/arch/arm/boot/dts/kirkwood-db.dtsi b/arch/arm/boot/dts/kirkwood-db.dtsi index c0e2a587917..053aa20fb30 100644 --- a/arch/arm/boot/dts/kirkwood-db.dtsi +++ b/arch/arm/boot/dts/kirkwood-db.dtsi @@ -39,28 +39,6 @@ status = "ok"; }; - nand@3000000 { - pinctrl-0 = <&pmx_nand>; - pinctrl-names = "default"; - chip-delay = <25>; - status = "okay"; - - partition@0 { - label = "uboot"; - reg = <0x0 0x100000>; - }; - - partition@100000 { - label = "uImage"; - reg = <0x100000 0x400000>; - }; - - partition@500000 { - label = "root"; - reg = <0x500000 0x1fb00000>; - }; - }; - sata@80000 { nr-ports = <2>; status = "okay"; @@ -80,6 +58,28 @@ }; }; +&nand { + pinctrl-0 = <&pmx_nand>; + pinctrl-names = "default"; + chip-delay = <25>; + status = "okay"; + + partition@0 { + label = "uboot"; + reg = <0x0 0x100000>; + }; + + partition@100000 { + label = "uImage"; + reg = <0x100000 0x400000>; + }; + + partition@500000 { + label = "root"; + reg = <0x500000 0x1fb00000>; + }; +}; + &mdio { status = "okay"; diff --git a/arch/arm/boot/dts/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/kirkwood-dnskw.dtsi index d544f77a4ca..aefa375a550 100644 --- a/arch/arm/boot/dts/kirkwood-dnskw.dtsi +++ b/arch/arm/boot/dts/kirkwood-dnskw.dtsi @@ -148,44 +148,6 @@ status = "okay"; nr-ports = <2>; }; - - nand@3000000 { - pinctrl-0 = <&pmx_nand>; - pinctrl-names = "default"; - status = "okay"; - chip-delay = <35>; - - partition@0 { - label = "u-boot"; - reg = <0x0000000 0x100000>; - read-only; - }; - - partition@100000 { - label = "uImage"; - reg = <0x0100000 0x500000>; - }; - - partition@600000 { - label = "ramdisk"; - reg = <0x0600000 0x500000>; - }; - - partition@b00000 { - label = "image"; - reg = <0x0b00000 0x6600000>; - }; - - partition@7100000 { - label = "mini firmware"; - reg = <0x7100000 0xa00000>; - }; - - partition@7b00000 { - label = "config"; - reg = <0x7b00000 0x500000>; - }; - }; }; regulators { @@ -220,6 +182,44 @@ }; }; +&nand { + pinctrl-0 = <&pmx_nand>; + pinctrl-names = "default"; + status = "okay"; + chip-delay = <35>; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x100000>; + read-only; + }; + + partition@100000 { + label = "uImage"; + reg = <0x0100000 0x500000>; + }; + + partition@600000 { + label = "ramdisk"; + reg = <0x0600000 0x500000>; + }; + + partition@b00000 { + label = "image"; + reg = <0x0b00000 0x6600000>; + }; + + partition@7100000 { + label = "mini firmware"; + reg = <0x7100000 0xa00000>; + }; + + partition@7b00000 { + label = "config"; + reg = <0x7b00000 0x500000>; + }; +}; + &mdio { status = "okay"; diff --git a/arch/arm/boot/dts/kirkwood-dockstar.dts b/arch/arm/boot/dts/kirkwood-dockstar.dts index 59a2117c35a..33ff368fbfa 100644 --- a/arch/arm/boot/dts/kirkwood-dockstar.dts +++ b/arch/arm/boot/dts/kirkwood-dockstar.dts @@ -34,26 +34,6 @@ serial@12000 { status = "ok"; }; - - nand@3000000 { - status = "okay"; - - partition@0 { - label = "u-boot"; - reg = <0x0000000 0x100000>; - read-only; - }; - - partition@100000 { - label = "uImage"; - reg = <0x0100000 0x400000>; - }; - - partition@500000 { - label = "data"; - reg = <0x0500000 0xfb00000>; - }; - }; }; gpio-leds { compatible = "gpio-leds"; @@ -91,6 +71,26 @@ }; }; +&nand { + status = "okay"; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x100000>; + read-only; + }; + + partition@100000 { + label = "uImage"; + reg = <0x0100000 0x400000>; + }; + + partition@500000 { + label = "data"; + reg = <0x0500000 0xfb00000>; + }; +}; + &mdio { status = "okay"; diff --git a/arch/arm/boot/dts/kirkwood-goflexnet.dts b/arch/arm/boot/dts/kirkwood-goflexnet.dts index 6f7c7d7ecf2..a43bebb2511 100644 --- a/arch/arm/boot/dts/kirkwood-goflexnet.dts +++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts @@ -67,31 +67,6 @@ status = "ok"; }; - nand@3000000 { - chip-delay = <40>; - status = "okay"; - - partition@0 { - label = "u-boot"; - reg = <0x0000000 0x100000>; - read-only; - }; - - partition@100000 { - label = "uImage"; - reg = <0x0100000 0x400000>; - }; - - partition@500000 { - label = "pogoplug"; - reg = <0x0500000 0x2000000>; - }; - - partition@2500000 { - label = "root"; - reg = <0x02500000 0xd800000>; - }; - }; sata@80000 { status = "okay"; nr-ports = <2>; @@ -171,6 +146,32 @@ }; }; +&nand { + chip-delay = <40>; + status = "okay"; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x100000>; + read-only; + }; + + partition@100000 { + label = "uImage"; + reg = <0x0100000 0x400000>; + }; + + partition@500000 { + label = "pogoplug"; + reg = <0x0500000 0x2000000>; + }; + + partition@2500000 { + label = "root"; + reg = <0x02500000 0xd800000>; + }; +}; + &mdio { status = "okay"; diff --git a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts index 6548b9dc685..d30a91a5047 100644 --- a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts +++ b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts @@ -40,26 +40,6 @@ status = "ok"; }; - nand@3000000 { - status = "okay"; - - partition@0 { - label = "u-boot"; - reg = <0x00000000 0x00100000>; - read-only; - }; - - partition@100000 { - label = "uImage"; - reg = <0x00100000 0x00400000>; - }; - - partition@500000 { - label = "data"; - reg = <0x00500000 0x1fb00000>; - }; - }; - sata@80000 { status = "okay"; nr-ports = <1>; @@ -97,6 +77,26 @@ }; }; +&nand { + status = "okay"; + + partition@0 { + label = "u-boot"; + reg = <0x00000000 0x00100000>; + read-only; + }; + + partition@100000 { + label = "uImage"; + reg = <0x00100000 0x00400000>; + }; + + partition@500000 { + label = "data"; + reg = <0x00500000 0x1fb00000>; + }; +}; + &mdio { status = "okay"; diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts index cb711a3bd98..c5fb02f7ebc 100644 --- a/arch/arm/boot/dts/kirkwood-ib62x0.dts +++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts @@ -5,7 +5,7 @@ / { model = "RaidSonic ICY BOX IB-NAS62x0 (Rev B)"; - compatible = "raidsonic,ib-nas6210-b", "raidsonic,ib-nas6220-b", "raidsonic,ib-nas6210", "raidsonic,ib-nas6220", "raidsonic,ib-nas62x0", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + compatible = "raidsonic,ib-nas6210-b", "raidsonic,ib-nas6220-b", "raidsonic,ib-nas6210", "raidsonic,ib-nas6220", "raidsonic,ib-nas62x0", "marvell,kirkwood-88f6281", "marvell,kirkwood"; memory { device_type = "memory"; @@ -43,6 +43,7 @@ marvell,function = "gpio"; }; }; + serial@12000 { status = "okay"; }; @@ -51,28 +52,6 @@ status = "okay"; nr-ports = <2>; }; - - nand@3000000 { - status = "okay"; - pinctrl-0 = <&pmx_nand>; - pinctrl-names = "default"; - - partition@0 { - label = "u-boot"; - reg = <0x0000000 0x100000>; - }; - - partition@100000 { - label = "uImage"; - reg = <0x0100000 0x600000>; - }; - - partition@700000 { - label = "root"; - reg = <0x0700000 0xf900000>; - }; - - }; }; gpio_keys { @@ -93,6 +72,7 @@ gpios = <&gpio0 28 1>; }; }; + gpio-leds { compatible = "gpio-leds"; pinctrl-0 = <&pmx_led_os_red &pmx_led_os_green @@ -113,13 +93,39 @@ gpios = <&gpio0 27 0>; }; }; + gpio_poweroff { compatible = "gpio-poweroff"; pinctrl-0 = <&pmx_power_off>; pinctrl-names = "default"; gpios = <&gpio0 24 0>; }; +}; + +&nand { + status = "okay"; + pinctrl-0 = <&pmx_nand>; + pinctrl-names = "default"; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0xe0000>; + }; + partition@e0000 { + label = "u-boot environment"; + reg = <0xe0000 0x100000>; + }; + + partition@100000 { + label = "uImage"; + reg = <0x0100000 0x600000>; + }; + + partition@700000 { + label = "root"; + reg = <0x0700000 0xf900000>; + }; }; @@ -134,6 +140,7 @@ ð0 { status = "okay"; + ethernet0-port@0 { phy-handle = <ðphy0>; }; diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts index 0323f017eee..4a62b206f68 100644 --- a/arch/arm/boot/dts/kirkwood-iconnect.dts +++ b/arch/arm/boot/dts/kirkwood-iconnect.dts @@ -19,7 +19,6 @@ }; mbus { - ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>; pcie-controller { status = "okay"; @@ -83,35 +82,6 @@ serial@12000 { status = "ok"; }; - - nand@3000000 { - status = "okay"; - - partition@0 { - label = "uboot"; - reg = <0x0000000 0xc0000>; - }; - - partition@a0000 { - label = "env"; - reg = <0xa0000 0x20000>; - }; - - partition@100000 { - label = "zImage"; - reg = <0x100000 0x300000>; - }; - - partition@540000 { - label = "initrd"; - reg = <0x540000 0x300000>; - }; - - partition@980000 { - label = "boot"; - reg = <0x980000 0x1f400000>; - }; - }; }; gpio-leds { @@ -180,6 +150,35 @@ }; }; +&nand { + status = "okay"; + + partition@0 { + label = "uboot"; + reg = <0x0000000 0xc0000>; + }; + + partition@a0000 { + label = "env"; + reg = <0xa0000 0x20000>; + }; + + partition@100000 { + label = "zImage"; + reg = <0x100000 0x300000>; + }; + + partition@540000 { + label = "initrd"; + reg = <0x540000 0x300000>; + }; + + partition@980000 { + label = "boot"; + reg = <0x980000 0x1f400000>; + }; +}; + &mdio { status = "okay"; diff --git a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts index df8447442b3..d15395d671e 100644 --- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts +++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts @@ -113,31 +113,6 @@ status = "ok"; }; - nand@3000000 { - status = "okay"; - - partition@0 { - label = "u-boot"; - reg = <0x0000000 0x100000>; - read-only; - }; - - partition@a0000 { - label = "env"; - reg = <0xa0000 0x20000>; - read-only; - }; - - partition@100000 { - label = "uImage"; - reg = <0x100000 0x300000>; - }; - - partition@400000 { - label = "uInitrd"; - reg = <0x540000 0x1000000>; - }; - }; sata@80000 { status = "okay"; nr-ports = <2>; @@ -195,6 +170,32 @@ }; }; +&nand { + status = "okay"; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x100000>; + read-only; + }; + + partition@a0000 { + label = "env"; + reg = <0xa0000 0x20000>; + read-only; + }; + + partition@100000 { + label = "uImage"; + reg = <0x100000 0x300000>; + }; + + partition@400000 { + label = "uInitrd"; + reg = <0x540000 0x1000000>; + }; +}; + &mdio { status = "okay"; diff --git a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts index 6899408482d..cd44f37e54b 100644 --- a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts +++ b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts @@ -34,13 +34,6 @@ serial@12000 { status = "ok"; }; - - nand@3000000 { - pinctrl-0 = <&pmx_nand>; - pinctrl-names = "default"; - status = "ok"; - chip-delay = <25>; - }; }; i2c@0 { @@ -51,6 +44,13 @@ }; }; +&nand { + pinctrl-0 = <&pmx_nand>; + pinctrl-names = "default"; + status = "ok"; + chip-delay = <25>; +}; + &mdio { status = "okay"; diff --git a/arch/arm/boot/dts/kirkwood-mplcec4.dts b/arch/arm/boot/dts/kirkwood-mplcec4.dts index ce2b94b513d..6c1ec2786e6 100644 --- a/arch/arm/boot/dts/kirkwood-mplcec4.dts +++ b/arch/arm/boot/dts/kirkwood-mplcec4.dts @@ -17,7 +17,6 @@ }; mbus { - ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>; pcie-controller { status = "okay"; @@ -96,37 +95,6 @@ pinctrl-names = "default"; }; - nand@3000000 { - pinctrl-0 = <&pmx_nand>; - pinctrl-names = "default"; - status = "okay"; - - partition@0 { - label = "uboot"; - reg = <0x0000000 0x100000>; - }; - - partition@100000 { - label = "env"; - reg = <0x100000 0x80000>; - }; - - partition@180000 { - label = "fdt"; - reg = <0x180000 0x80000>; - }; - - partition@200000 { - label = "kernel"; - reg = <0x200000 0x400000>; - }; - - partition@600000 { - label = "rootfs"; - reg = <0x600000 0x1fa00000>; - }; - }; - rtc@10300 { status = "disabled"; }; @@ -194,6 +162,37 @@ }; }; +&nand { + pinctrl-0 = <&pmx_nand>; + pinctrl-names = "default"; + status = "okay"; + + partition@0 { + label = "uboot"; + reg = <0x0000000 0x100000>; + }; + + partition@100000 { + label = "env"; + reg = <0x100000 0x80000>; + }; + + partition@180000 { + label = "fdt"; + reg = <0x180000 0x80000>; + }; + + partition@200000 { + label = "kernel"; + reg = <0x200000 0x400000>; + }; + + partition@600000 { + label = "rootfs"; + reg = <0x600000 0x1fa00000>; + }; +}; + &mdio { status = "okay"; diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts index 874857ea9cb..e6a102cf424 100644 --- a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts +++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts @@ -17,7 +17,6 @@ }; mbus { - ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>; pcie-controller { status = "okay"; @@ -98,36 +97,6 @@ status = "okay"; }; - nand@3000000 { - status = "okay"; - - partition@0 { - label = "u-boot"; - reg = <0x0000000 0x180000>; - read-only; - }; - - partition@180000 { - label = "u-boot-env"; - reg = <0x180000 0x20000>; - }; - - partition@200000 { - label = "uImage"; - reg = <0x0200000 0x600000>; - }; - - partition@800000 { - label = "minirootfs"; - reg = <0x0800000 0x1000000>; - }; - - partition@1800000 { - label = "jffs2"; - reg = <0x1800000 0x6800000>; - }; - }; - sata@80000 { status = "okay"; nr-ports = <2>; @@ -208,6 +177,36 @@ }; }; +&nand { + status = "okay"; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x180000>; + read-only; + }; + + partition@180000 { + label = "u-boot-env"; + reg = <0x180000 0x20000>; + }; + + partition@200000 { + label = "uImage"; + reg = <0x0200000 0x600000>; + }; + + partition@800000 { + label = "minirootfs"; + reg = <0x0800000 0x1000000>; + }; + + partition@1800000 { + label = "jffs2"; + reg = <0x1800000 0x6800000>; + }; +}; + &mdio { status = "okay"; diff --git a/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi b/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi index 06267a91de3..e3f915defd3 100644 --- a/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi +++ b/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi @@ -27,49 +27,6 @@ nr-ports = <2>; }; - nand@3000000 { - status = "okay"; - chip-delay = <35>; - - partition@0 { - label = "uboot"; - reg = <0x0000000 0x0100000>; - read-only; - }; - partition@100000 { - label = "uboot_env"; - reg = <0x0100000 0x0080000>; - }; - partition@180000 { - label = "key_store"; - reg = <0x0180000 0x0080000>; - }; - partition@200000 { - label = "info"; - reg = <0x0200000 0x0080000>; - }; - partition@280000 { - label = "etc"; - reg = <0x0280000 0x0a00000>; - }; - partition@c80000 { - label = "kernel_1"; - reg = <0x0c80000 0x0a00000>; - }; - partition@1680000 { - label = "rootfs1"; - reg = <0x1680000 0x2fc0000>; - }; - partition@4640000 { - label = "kernel_2"; - reg = <0x4640000 0x0a00000>; - }; - partition@5040000 { - label = "rootfs2"; - reg = <0x5040000 0x2fc0000>; - }; - }; - pcie-controller { status = "okay"; @@ -105,3 +62,46 @@ }; }; }; + +&nand { + status = "okay"; + chip-delay = <35>; + + partition@0 { + label = "uboot"; + reg = <0x0000000 0x0100000>; + read-only; + }; + partition@100000 { + label = "uboot_env"; + reg = <0x0100000 0x0080000>; + }; + partition@180000 { + label = "key_store"; + reg = <0x0180000 0x0080000>; + }; + partition@200000 { + label = "info"; + reg = <0x0200000 0x0080000>; + }; + partition@280000 { + label = "etc"; + reg = <0x0280000 0x0a00000>; + }; + partition@c80000 { + label = "kernel_1"; + reg = <0x0c80000 0x0a00000>; + }; + partition@1680000 { + label = "rootfs1"; + reg = <0x1680000 0x2fc0000>; + }; + partition@4640000 { + label = "kernel_2"; + reg = <0x4640000 0x0a00000>; + }; + partition@5040000 { + label = "rootfs2"; + reg = <0x5040000 0x2fc0000>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-nsa310.dts b/arch/arm/boot/dts/kirkwood-nsa310.dts index 7aeae0c2c1f..b5418bcaecc 100644 --- a/arch/arm/boot/dts/kirkwood-nsa310.dts +++ b/arch/arm/boot/dts/kirkwood-nsa310.dts @@ -15,7 +15,6 @@ }; mbus { - ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>; pcie-controller { status = "okay"; diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts index 85ccf8d8abb..f0e3d213604 100644 --- a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts +++ b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts @@ -29,43 +29,6 @@ pinctrl-names = "default"; }; - nand@3000000 { - chip-delay = <25>; - status = "okay"; - pinctrl-0 = <&pmx_nand>; - pinctrl-names = "default"; - - partition@0 { - label = "uboot"; - reg = <0x0 0x90000>; - }; - - partition@90000 { - label = "env"; - reg = <0x90000 0x44000>; - }; - - partition@d4000 { - label = "test"; - reg = <0xd4000 0x24000>; - }; - - partition@f4000 { - label = "conf"; - reg = <0xf4000 0x400000>; - }; - - partition@4f4000 { - label = "linux"; - reg = <0x4f4000 0x1d20000>; - }; - - partition@2214000 { - label = "user"; - reg = <0x2214000 0x1dec000>; - }; - }; - sata@80000 { nr-ports = <1>; status = "okay"; @@ -167,6 +130,43 @@ }; }; +&nand { + chip-delay = <25>; + status = "okay"; + pinctrl-0 = <&pmx_nand>; + pinctrl-names = "default"; + + partition@0 { + label = "uboot"; + reg = <0x0 0x90000>; + }; + + partition@90000 { + label = "env"; + reg = <0x90000 0x44000>; + }; + + partition@d4000 { + label = "test"; + reg = <0xd4000 0x24000>; + }; + + partition@f4000 { + label = "conf"; + reg = <0xf4000 0x400000>; + }; + + partition@4f4000 { + label = "linux"; + reg = <0x4f4000 0x1d20000>; + }; + + partition@2214000 { + label = "user"; + reg = <0x2214000 0x1dec000>; + }; +}; + &mdio { status = "okay"; diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a7.dts b/arch/arm/boot/dts/kirkwood-openblocks_a7.dts new file mode 100644 index 00000000000..851fb2a60f2 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-openblocks_a7.dts @@ -0,0 +1,223 @@ +/* + * Device Tree file for OpenBlocks A7 board + * + * Copyright (C) 2013 Free Electrons + * + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +#include "kirkwood.dtsi" +#include "kirkwood-6282.dtsi" + +/ { + model = "Plat'Home OpenBlocksA7"; + compatible = "plathome,openblocks-a7", "marvell,kirkwood-88f6283", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x40000000>; /* 1 GB */ + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + ocp@f1000000 { + serial@12000 { + status = "ok"; + pinctrl-0 = <&pmx_uart0>; + pinctrl-names = "default"; + }; + + serial@12100 { + status = "ok"; + pinctrl-0 = <&pmx_uart1>; + pinctrl-names = "default"; + }; + + sata@80000 { + nr-ports = <1>; + status = "okay"; + }; + + i2c@11100 { + status = "okay"; + pinctrl-0 = <&pmx_twsi1>; + pinctrl-names = "default"; + + s24c02: s24c02@50 { + compatible = "24c02"; + reg = <0x50>; + }; + }; + + pinctrl: pinctrl@10000 { + pinctrl-0 = <&pmx_dip_switches &pmx_gpio_header>; + pinctrl-names = "default"; + + pmx_uart0: pmx-uart0 { + marvell,pins = "mpp10", "mpp11", "mpp15", + "mpp16"; + marvell,function = "uart0"; + }; + + pmx_uart1: pmx-uart1 { + marvell,pins = "mpp13", "mpp14", "mpp8", + "mpp9"; + marvell,function = "uart1"; + }; + + pmx_sysrst: pmx-sysrst { + marvell,pins = "mpp6"; + marvell,function = "sysrst"; + }; + + pmx_dip_switches: pmx-dip-switches { + marvell,pins = "mpp44", "mpp45", "mpp46", "mpp47"; + marvell,function = "gpio"; + }; + + /* + * Accessible on connector J202. The MPP + * listed below are pin 1-7, pin 8 is unused, + * pin 9 is external reset input and pin 10 is + * ground. + */ + pmx_gpio_header: pmx-gpio-header { + marvell,pins = "mpp17", "mpp7", "mpp29", "mpp28", + "mpp35", "mpp34", "mpp40"; + marvell,function = "gpio"; + }; + + pmx_gpio_init: pmx-init { + marvell,pins = "mpp38"; + marvell,function = "gpio"; + }; + + pmx_usb_oc: pmx-usb-oc { + marvell,pins = "mpp39"; + marvell,function = "gpio"; + }; + + pmx_leds: pmx-leds { + marvell,pins = "mpp41", "mpp42", "mpp43"; + marvell,function = "gpio"; + }; + + pmx_ge1: pmx-ge1 { + marvell,pins = "mpp20", "mpp21", "mpp22", "mpp23", + "mpp24", "mpp25", "mpp26", "mpp27", + "mpp30", "mpp31", "mpp32", "mpp33"; + marvell,function = "ge1"; + }; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pmx_leds>; + pinctrl-names = "default"; + + led-red { + label = "obsa7:red:stat"; + gpios = <&gpio1 9 1>; + }; + + led-green { + label = "obsa7:green:stat"; + gpios = <&gpio1 10 1>; + }; + + led-yellow { + label = "obsa7:yellow:stat"; + gpios = <&gpio1 11 1>; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + pinctrl-0 = <&pmx_gpio_init>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + button@1 { + label = "Init Button"; + linux,code = <116>; + gpios = <&gpio1 6 0>; + }; + }; +}; + +&nand { + chip-delay = <25>; + status = "okay"; + pinctrl-0 = <&pmx_nand>; + pinctrl-names = "default"; + + partition@0 { + label = "uboot"; + reg = <0x0 0x1c0000>; + }; + + partition@1c0000 { + label = "env"; + reg = <0x1c0000 0x2c0000>; + }; + + partition@480000 { + label = "test"; + reg = <0x480000 0x160000>; + }; + + partition@5e0000 { + label = "conf"; + reg = <0x5e0000 0x540000>; + }; + + partition@b20000 { + label = "linux"; + reg = <0xb20000 0x3d40000>; + }; + + partition@4860000 { + label = "user"; + reg = <0x4860000 0xb7a0000>; + }; +}; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@0 { + device_type = "ethernet-phy"; + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + device_type = "ethernet-phy"; + reg = <1>; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; + +ð1 { + status = "okay"; + pinctrl-0 = <&pmx_ge1>; + pinctrl-names = "default"; + ethernet1-port@0 { + phy-handle = <ðphy1>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi index 5696b630b70..1173d7fb31b 100644 --- a/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi +++ b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi @@ -48,27 +48,6 @@ pinctrl-names = "default"; status = "okay"; }; - - nand@3000000 { - pinctrl-0 = <&pmx_nand>; - pinctrl-names = "default"; - status = "okay"; - - partition@0 { - label = "u-boot"; - reg = <0x0000000 0x100000>; - }; - - partition@100000 { - label = "uImage"; - reg = <0x0100000 0x400000>; - }; - - partition@500000 { - label = "root"; - reg = <0x0500000 0x1fb00000>; - }; - }; }; regulators { @@ -92,6 +71,27 @@ }; }; +&nand { + pinctrl-0 = <&pmx_nand>; + pinctrl-names = "default"; + status = "okay"; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x100000>; + }; + + partition@100000 { + label = "uImage"; + reg = <0x0100000 0x400000>; + }; + + partition@500000 { + label = "root"; + reg = <0x0500000 0x1fb00000>; + }; +}; + &mdio { status = "okay"; diff --git a/arch/arm/boot/dts/kirkwood-topkick.dts b/arch/arm/boot/dts/kirkwood-topkick.dts index 30842b4ff29..320da677b98 100644 --- a/arch/arm/boot/dts/kirkwood-topkick.dts +++ b/arch/arm/boot/dts/kirkwood-topkick.dts @@ -90,37 +90,6 @@ pinctrl-names = "default"; }; - nand@3000000 { - status = "okay"; - pinctrl-0 = <&pmx_nand>; - pinctrl-names = "default"; - - partition@0 { - label = "u-boot"; - reg = <0x0000000 0x180000>; - }; - - partition@180000 { - label = "u-boot env"; - reg = <0x0180000 0x20000>; - }; - - partition@200000 { - label = "uImage"; - reg = <0x0200000 0x600000>; - }; - - partition@800000 { - label = "uInitrd"; - reg = <0x0800000 0x1000000>; - }; - - partition@1800000 { - label = "rootfs"; - reg = <0x1800000 0xe800000>; - }; - }; - sata@80000 { status = "okay"; nr-ports = <1>; @@ -204,6 +173,37 @@ }; }; +&nand { + status = "okay"; + pinctrl-0 = <&pmx_nand>; + pinctrl-names = "default"; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x180000>; + }; + + partition@180000 { + label = "u-boot env"; + reg = <0x0180000 0x20000>; + }; + + partition@200000 { + label = "uImage"; + reg = <0x0200000 0x600000>; + }; + + partition@800000 { + label = "uInitrd"; + reg = <0x0800000 0x1000000>; + }; + + partition@1800000 { + label = "rootfs"; + reg = <0x1800000 0xe800000>; + }; +}; + &mdio { status = "okay"; diff --git a/arch/arm/boot/dts/kirkwood-ts219-6282.dts b/arch/arm/boot/dts/kirkwood-ts219-6282.dts index 9efcd2dc79d..345562f7589 100644 --- a/arch/arm/boot/dts/kirkwood-ts219-6282.dts +++ b/arch/arm/boot/dts/kirkwood-ts219-6282.dts @@ -6,7 +6,6 @@ / { mbus { - ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>; pcie-controller { status = "okay"; diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index 1335b2e1bed..8b73c80f1da 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -28,16 +28,43 @@ compatible = "marvell,kirkwood-mbus", "simple-bus"; #address-cells = <2>; #size-cells = <1>; + /* If a board file needs to change this ranges it must replace it completely */ + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 /* internal-regs */ + MBUS_ID(0x01, 0x2f) 0 0xf4000000 0x10000 /* nand flash */ + MBUS_ID(0x03, 0x01) 0 0xf5000000 0x10000 /* crypto sram */ + >; controller = <&mbusc>; pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256 MiB memory space */ pcie-io-aperture = <0xf2000000 0x100000>; /* 1 MiB I/O space */ + + crypto@0301 { + compatible = "marvell,orion-crypto"; + reg = <MBUS_ID(0xf0, 0x01) 0x30000 0x10000>, + <MBUS_ID(0x03, 0x01) 0 0x800>; + reg-names = "regs", "sram"; + interrupts = <22>; + clocks = <&gate_clk 17>; + status = "okay"; + }; + + nand: nand@012f { + #address-cells = <1>; + #size-cells = <1>; + cle = <0>; + ale = <1>; + bank-width = <1>; + compatible = "marvell,orion-nand"; + reg = <MBUS_ID(0x01, 0x2f) 0 0x400>; + chip-delay = <25>; + /* set partition map and/or chip-delay in board dts */ + clocks = <&gate_clk 7>; + status = "disabled"; + }; }; ocp@f1000000 { compatible = "simple-bus"; - ranges = <0x00000000 0xf1000000 0x0100000 - 0xf4000000 0xf4000000 0x0000400 - 0xf5000000 0xf5000000 0x0000400>; + ranges = <0x00000000 0xf1000000 0x0100000>; #address-cells = <1>; #size-cells = <1>; @@ -193,20 +220,6 @@ status = "okay"; }; - nand@3000000 { - #address-cells = <1>; - #size-cells = <1>; - cle = <0>; - ale = <1>; - bank-width = <1>; - compatible = "marvell,orion-nand"; - reg = <0xf4000000 0x400>; - chip-delay = <25>; - /* set partition map and/or chip-delay in board dts */ - clocks = <&gate_clk 7>; - status = "disabled"; - }; - i2c@11000 { compatible = "marvell,mv64xxx-i2c"; reg = <0x11000 0x20>; @@ -218,16 +231,6 @@ status = "disabled"; }; - crypto@30000 { - compatible = "marvell,orion-crypto"; - reg = <0x30000 0x10000>, - <0xf5000000 0x800>; - reg-names = "regs", "sram"; - interrupts = <22>; - clocks = <&gate_clk 17>; - status = "okay"; - }; - mdio: mdio-bus@72004 { compatible = "marvell,orion-mdio"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/mxs-pinfunc.h b/arch/arm/boot/dts/mxs-pinfunc.h new file mode 100644 index 00000000000..c6da987b20c --- /dev/null +++ b/arch/arm/boot/dts/mxs-pinfunc.h @@ -0,0 +1,31 @@ +/* + * Header providing constants for i.MX28 pinctrl bindings. + * + * Copyright (C) 2013 Lothar Waßmann <LW@KARO-electronics.de> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#ifndef __DT_BINDINGS_MXS_PINCTRL_H__ +#define __DT_BINDINGS_MXS_PINCTRL_H__ + +/* fsl,drive-strength property */ +#define MXS_DRIVE_4mA 0 +#define MXS_DRIVE_8mA 1 +#define MXS_DRIVE_12mA 2 +#define MXS_DRIVE_16mA 3 + +/* fsl,voltage property */ +#define MXS_VOLTAGE_LOW 0 +#define MXS_VOLTAGE_HIGH 1 + +/* fsl,pull-up property */ +#define MXS_PULL_DISABLE 0 +#define MXS_PULL_ENABLE 1 + +#endif /* __DT_BINDINGS_MXS_PINCTRL_H__ */ diff --git a/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi b/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi new file mode 100644 index 00000000000..9c18adf788f --- /dev/null +++ b/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi @@ -0,0 +1,52 @@ +/* + * Common file for GPMC connected smsc911x on omaps + * + * Note that the board specifc DTS file needs to specify + * ranges, pinctrl, reg, interrupt parent and interrupts. + */ + +/ { + vddvario: regulator-vddvario { + compatible = "regulator-fixed"; + regulator-name = "vddvario"; + regulator-always-on; + }; + + vdd33a: regulator-vdd33a { + compatible = "regulator-fixed"; + regulator-name = "vdd33a"; + regulator-always-on; + }; +}; + +&gpmc { + ethernet@gpmc { + compatible = "smsc,lan9221", "smsc,lan9115"; + bank-width = <2>; + gpmc,mux-add-data; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <186>; + gpmc,cs-wr-off-ns = <186>; + gpmc,adv-on-ns = <12>; + gpmc,adv-rd-off-ns = <48>; + gpmc,adv-wr-off-ns = <48>; + gpmc,oe-on-ns = <54>; + gpmc,oe-off-ns = <168>; + gpmc,we-on-ns = <54>; + gpmc,we-off-ns = <168>; + gpmc,rd-cycle-ns = <186>; + gpmc,wr-cycle-ns = <186>; + gpmc,access-ns = <114>; + gpmc,page-burst-access-ns = <6>; + gpmc,bus-turnaround-ns = <12>; + gpmc,cycle2cycle-delay-ns = <18>; + gpmc,wr-data-mux-bus-ns = <90>; + gpmc,wr-access-ns = <186>; + gpmc,cycle2cycle-samecsen; + gpmc,cycle2cycle-diffcsen; + vmmc-supply = <&vddvario>; + vmmc_aux-supply = <&vdd33a>; + reg-io-width = <4>; + smsc,save-mac-address; + }; +}; diff --git a/arch/arm/boot/dts/omap-zoom-common.dtsi b/arch/arm/boot/dts/omap-zoom-common.dtsi new file mode 100644 index 00000000000..b0ee342598f --- /dev/null +++ b/arch/arm/boot/dts/omap-zoom-common.dtsi @@ -0,0 +1,33 @@ +/* + * Common features on the Zoom debug board + */ + +#include "omap-gpmc-smsc911x.dtsi" + +&gpmc { + ranges = <3 0 0x10000000 0x00000400>, + <7 0 0x2c000000 0x01000000>; + + /* + * Four port TL16CP754C serial port on GPMC, + * they probably share the same GPIO IRQ + * REVISIT: Add timing support from slls644g.pdf + */ + 8250@3,0 { + compatible = "ns16550a"; + reg = <3 0 0x100>; + bank-width = <2>; + reg-shift = <1>; + reg-io-width = <1>; + interrupt-parent = <&gpio4>; + interrupts = <6 IRQ_TYPE_EDGE_RISING>; /* gpio102 */ + clock-frequency = <1843200>; + current-speed = <115200>; + }; + + ethernet@gpmc { + reg = <7 0 0xff>; + interrupt-parent = <&gpio5>; + interrupts = <30 IRQ_TYPE_LEVEL_LOW>; /* gpio158 */ + }; +}; diff --git a/arch/arm/boot/dts/omap2420-h4.dts b/arch/arm/boot/dts/omap2420-h4.dts index 224c08f472f..34cdecb4fdd 100644 --- a/arch/arm/boot/dts/omap2420-h4.dts +++ b/arch/arm/boot/dts/omap2420-h4.dts @@ -50,15 +50,15 @@ label = "bootloader"; reg = <0 0x20000>; }; - partition@0x20000 { + partition@20000 { label = "params"; reg = <0x20000 0x20000>; }; - partition@0x40000 { + partition@40000 { label = "kernel"; reg = <0x40000 0x200000>; }; - partition@0x240000 { + partition@240000 { label = "file-system"; reg = <0x240000 0x3dc0000>; }; diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 2816bf61267..31a632f7eff 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -69,6 +69,23 @@ }; }; + + /* HS USB Port 2 Power */ + hsusb2_power: hsusb2_power_reg { + compatible = "regulator-fixed"; + regulator-name = "hsusb2_vbus"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&twl_gpio 18 0>; /* GPIO LEDA */ + startup-delay-us = <70000>; + }; + + /* HS USB Host PHY on PORT 2 */ + hsusb2_phy: hsusb2_phy { + compatible = "usb-nop-xceiv"; + reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>; /* gpio_147 */ + vcc-supply = <&hsusb2_power>; + }; }; &omap3_pmx_wkup { @@ -79,6 +96,37 @@ }; }; +&omap3_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = < + &hsusbb2_pins + >; + + uart3_pins: pinmux_uart3_pins { + pinctrl-single,pins = < + 0x16e (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ + 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */ + >; + }; + + hsusbb2_pins: pinmux_hsusbb2_pins { + pinctrl-single,pins = < + 0x5c0 (PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ + 0x5c2 (PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ + 0x5c4 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */ + 0x5c6 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */ + 0x5c8 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */ + 0x5cA (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */ + 0x1a4 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */ + 0x1a6 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */ + 0x1a8 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_simo.hsusb2_data4 */ + 0x1aa (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_somi.hsusb2_data5 */ + 0x1ac (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs0.hsusb2_data6 */ + 0x1ae (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs1.hsusb2_data3 */ + >; + }; +}; + &i2c1 { clock-frequency = <2600000>; @@ -144,19 +192,12 @@ &usb_otg_hs { interface-type = <0>; usb-phy = <&usb2_phy>; + phys = <&usb2_phy>; + phy-names = "usb2-phy"; mode = <3>; power = <50>; }; -&omap3_pmx_core { - uart3_pins: pinmux_uart3_pins { - pinctrl-single,pins = < - 0x16e (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ - 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */ - >; - }; -}; - &uart3 { pinctrl-names = "default"; pinctrl-0 = <&uart3_pins>; @@ -166,3 +207,11 @@ pinctrl-names = "default"; pinctrl-0 = <&gpio1_pins>; }; + +&usbhshost { + port2-mode = "ehci-phy"; +}; + +&usbhsehci { + phys = <0 &hsusb2_phy>; +}; diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index dfd83103657..fa532aaacc6 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -44,17 +44,6 @@ }; }; - /* HS USB Port 2 RESET */ - hsusb2_reset: hsusb2_reset_reg { - compatible = "regulator-fixed"; - regulator-name = "hsusb2_reset"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio5 19 0>; /* gpio_147 */ - startup-delay-us = <70000>; - enable-active-high; - }; - /* HS USB Port 2 Power */ hsusb2_power: hsusb2_power_reg { compatible = "regulator-fixed"; @@ -68,7 +57,7 @@ /* HS USB Host PHY on PORT 2 */ hsusb2_phy: hsusb2_phy { compatible = "usb-nop-xceiv"; - reset-supply = <&hsusb2_reset>; + reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>; /* gpio_147 */ vcc-supply = <&hsusb2_power>; }; @@ -101,18 +90,18 @@ hsusbb2_pins: pinmux_hsusbb2_pins { pinctrl-single,pins = < - 0x5c0 (PIN_OUTPUT | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_clk */ - 0x5c2 (PIN_OUTPUT | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_stp */ - 0x5c4 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_dir */ - 0x5c6 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_nxt */ - 0x5c8 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_dat0 */ - 0x5cA (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_dat1 */ - 0x1a4 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_dat2 */ - 0x1a6 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_dat3 */ - 0x1a8 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_dat4 */ - 0x1aa (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_dat5 */ - 0x1ac (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_dat6 */ - 0x1ae (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_dat7 */ + 0x5c0 (PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ + 0x5c2 (PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ + 0x5c4 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */ + 0x5c6 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */ + 0x5c8 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */ + 0x5cA (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */ + 0x1a4 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */ + 0x1a6 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */ + 0x1a8 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_simo.hsusb2_data4 */ + 0x1aa (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_somi.hsusb2_data5 */ + 0x1ac (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs0.hsusb2_data6 */ + 0x1ae (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs1.hsusb2_data3 */ >; }; @@ -180,3 +169,12 @@ pinctrl-names = "default"; pinctrl-0 = <&gpio1_pins>; }; + +&usb_otg_hs { + interface-type = <0>; + usb-phy = <&usb2_phy>; + phys = <&usb2_phy>; + phy-names = "usb2-phy"; + mode = <3>; + power = <50>; +}; diff --git a/arch/arm/boot/dts/omap3-devkit8000.dts b/arch/arm/boot/dts/omap3-devkit8000.dts index 7ef282795dd..4665421bb7b 100644 --- a/arch/arm/boot/dts/omap3-devkit8000.dts +++ b/arch/arm/boot/dts/omap3-devkit8000.dts @@ -125,7 +125,7 @@ nand-bus-width = <16>; gpmc,device-nand; - gpmc,sync-clki-ps = <0>; + gpmc,sync-clk-ps = <0>; gpmc,cs-on-ns = <0>; gpmc,cs-rd-off-ns = <44>; gpmc,cs-wr-off-ns = <44>; diff --git a/arch/arm/boot/dts/omap3-evm-37xx.dts b/arch/arm/boot/dts/omap3-evm-37xx.dts new file mode 100644 index 00000000000..4df68ad3736 --- /dev/null +++ b/arch/arm/boot/dts/omap3-evm-37xx.dts @@ -0,0 +1,151 @@ +/* + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "omap36xx.dtsi" +#include "omap3-evm-common.dtsi" + + +/ { + model = "TI OMAP37XX EVM (TMDSEVM3730)"; + compatible = "ti,omap3-evm-37xx", "ti,omap36xx"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; + + wl12xx_vmmc: wl12xx_vmmc { + pinctrl-names = "default"; + pinctrl-0 = <&wl12xx_gpio>; + }; +}; + +&omap3_pmx_core { + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + 0x114 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ + 0x116 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ + 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ + 0x11a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ + 0x11c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ + 0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ + 0x120 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat4.sdmmc1_dat4 */ + 0x122 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat5.sdmmc1_dat5 */ + 0x124 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat6.sdmmc1_dat6 */ + 0x126 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat7.sdmmc1_dat7 */ + >; + }; + + /* NOTE: Clocked externally, needs INPUT also for sdmmc2_clk.sdmmc2_clk */ + mmc2_pins: pinmux_mmc2_pins { + pinctrl-single,pins = < + 0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */ + 0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */ + 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */ + 0x12e (WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */ + 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */ + 0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */ + >; + }; + + uart3_pins: pinmux_uart3_pins { + pinctrl-single,pins = < + 0x16e (WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ + 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ + >; + }; + + wl12xx_gpio: pinmux_wl12xx_gpio { + pinctrl-single,pins = < + 0x150 (PIN_OUTPUT | MUX_MODE4) /* uart1_cts.gpio_150 */ + 0x14e (PIN_INPUT | MUX_MODE4) /* uart1_rts.gpio_149 */ + >; + }; + + smsc911x_pins: pinmux_smsc911x_pins { + pinctrl-single,pins = < + 0x1a2 (PIN_INPUT | MUX_MODE4) /* mcspi1_cs2.gpio_176 */ + >; + }; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; +}; + +&mmc3 { + status = "disabled"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; +}; + +&gpmc { + ranges = <0 0 0x00000000 0x20000000>, + <5 0 0x2c000000 0x01000000>; + + nand@0,0 { + linux,mtd-name= "hynix,h8kds0un0mer-4em"; + reg = <0 0 0>; + nand-bus-width = <16>; + ti,nand-ecc-opt = "bch8"; + + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <44>; + gpmc,cs-wr-off-ns = <44>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <34>; + gpmc,adv-wr-off-ns = <44>; + gpmc,we-off-ns = <40>; + gpmc,oe-off-ns = <54>; + gpmc,access-ns = <64>; + gpmc,rd-cycle-ns = <82>; + gpmc,wr-cycle-ns = <82>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; + + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "X-Loader"; + reg = <0 0x80000>; + }; + partition@0x80000 { + label = "U-Boot"; + reg = <0x80000 0x1c0000>; + }; + partition@0x1c0000 { + label = "Environment"; + reg = <0x240000 0x40000>; + }; + partition@0x280000 { + label = "Kernel"; + reg = <0x280000 0x500000>; + }; + partition@0x780000 { + label = "Filesystem"; + reg = <0x780000 0x1f880000>; + }; + }; + + ethernet@gpmc { + pinctrl-names = "default"; + pinctrl-0 = <&smsc911x_pins>; + }; +}; diff --git a/arch/arm/boot/dts/omap3-evm-common.dtsi b/arch/arm/boot/dts/omap3-evm-common.dtsi new file mode 100644 index 00000000000..3007e79c9cd --- /dev/null +++ b/arch/arm/boot/dts/omap3-evm-common.dtsi @@ -0,0 +1,96 @@ +/* + * Common support for omap3 EVM boards + */ + +#include "omap-gpmc-smsc911x.dtsi" + +/ { + cpus { + cpu@0 { + cpu0-supply = <&vcc>; + }; + }; + + leds { + compatible = "gpio-leds"; + ledb { + label = "omap3evm::ledb"; + gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */ + linux,default-trigger = "default-on"; + }; + }; + + wl12xx_vmmc: wl12xx_vmmc { + compatible = "regulator-fixed"; + regulator-name = "vwl1271"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio5 22 0>; /* gpio150 */ + startup-delay-us = <70000>; + enable-active-high; + vin-supply = <&vmmc2>; + }; +}; + +&i2c1 { + clock-frequency = <2600000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + interrupt-parent = <&intc>; + }; +}; + +#include "twl4030.dtsi" +#include "twl4030_omap3.dtsi" + +&i2c2 { + clock-frequency = <400000>; +}; + +&i2c3 { + clock-frequency = <400000>; + + /* + * TVP5146 Video decoder-in for analog input support. + */ + tvp5146@5c { + compatible = "ti,tvp5146m2"; + reg = <0x5c>; + }; +}; + +&mmc1 { + vmmc-supply = <&vmmc1>; + vmmc_aux-supply = <&vsim>; + bus-width = <8>; +}; + +&mmc2 { + vmmc-supply = <&wl12xx_vmmc>; + non-removable; + bus-width = <4>; + cap-power-off-card; +}; + +&twl_gpio { + ti,use-leds; +}; + +&usb_otg_hs { + interface-type = <0>; + usb-phy = <&usb2_phy>; + phys = <&usb2_phy>; + phy-names = "usb2-phy"; + mode = <3>; + power = <50>; +}; + +&gpmc { + ethernet@gpmc { + interrupt-parent = <&gpio6>; + interrupts = <16 8>; + reg = <5 0 0xff>; + }; +}; diff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/omap3-evm.dts index 7d4329d179c..e10dcd0fa53 100644 --- a/arch/arm/boot/dts/omap3-evm.dts +++ b/arch/arm/boot/dts/omap3-evm.dts @@ -8,68 +8,14 @@ /dts-v1/; #include "omap34xx.dtsi" +#include "omap3-evm-common.dtsi" / { - model = "TI OMAP3 EVM (OMAP3530, AM/DM37x)"; + model = "TI OMAP35XX EVM (TMDSEVM3530)"; compatible = "ti,omap3-evm", "ti,omap3"; - cpus { - cpu@0 { - cpu0-supply = <&vcc>; - }; - }; - memory { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; - - leds { - compatible = "gpio-leds"; - ledb { - label = "omap3evm::ledb"; - gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */ - linux,default-trigger = "default-on"; - }; - }; -}; - -&i2c1 { - clock-frequency = <2600000>; - - twl: twl@48 { - reg = <0x48>; - interrupts = <7>; /* SYS_NIRQ cascaded to intc */ - interrupt-parent = <&intc>; - }; -}; - -#include "twl4030.dtsi" -#include "twl4030_omap3.dtsi" - -&i2c2 { - clock-frequency = <400000>; -}; - -&i2c3 { - clock-frequency = <400000>; - - /* - * TVP5146 Video decoder-in for analog input support. - */ - tvp5146@5c { - compatible = "ti,tvp5146m2"; - reg = <0x5c>; - }; -}; - -&twl_gpio { - ti,use-leds; -}; - -&usb_otg_hs { - interface-type = <0>; - usb-phy = <&usb2_phy>; - mode = <3>; - power = <50>; }; diff --git a/arch/arm/boot/dts/omap3-gta04.dts b/arch/arm/boot/dts/omap3-gta04.dts new file mode 100644 index 00000000000..b9b55c95a56 --- /dev/null +++ b/arch/arm/boot/dts/omap3-gta04.dts @@ -0,0 +1,170 @@ +/* + * Copyright (C) 2013 Marek Belisko <marek@goldelico.com> + * + * Based on omap3-beagle-xm.dts + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "omap36xx.dtsi" + +/ { + model = "OMAP3 GTA04"; + compatible = "ti,omap3-gta04", "ti,omap3"; + + cpus { + cpu@0 { + cpu0-supply = <&vcc>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x20000000>; /* 512 MB */ + }; + + gpio-keys { + compatible = "gpio-keys"; + + aux-button { + label = "aux"; + linux,code = <169>; + gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; + gpio-key,wakeup; + }; + }; +}; + +&omap3_pmx_core { + uart1_pins: pinmux_uart1_pins { + pinctrl-single,pins = < + 0x152 (PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */ + 0x14c (PIN_OUTPUT |MUX_MODE0) /* uart1_tx.uart1_tx */ + >; + }; + + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + 0x14a (PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */ + 0x148 (PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */ + >; + }; + + uart3_pins: pinmux_uart3_pins { + pinctrl-single,pins = < + 0x16e (PIN_INPUT | MUX_MODE0) /* uart3_rx.uart3_rx */ + 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx.uart3_tx */ + >; + }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + 0x114 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ + 0x116 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ + 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ + 0x11a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ + 0x11c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ + 0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ + >; + }; +}; + +&i2c1 { + clock-frequency = <2600000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + interrupt-parent = <&intc>; + }; +}; + +#include "twl4030.dtsi" +#include "twl4030_omap3.dtsi" + +&i2c2 { + clock-frequency = <400000>; + + /* pressure sensor */ + bmp085@77 { + compatible = "bosch,bmp085"; + reg = <0x77>; + }; + + /* leds */ + tca6507@45 { + compatible = "ti,tca6507"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x45>; + + gta04_led0: red_aux@0 { + label = "gta04:red:aux"; + reg = <0x0>; + }; + + gta04_led1: green_aux@1 { + label = "gta04:green:aux"; + reg = <0x1>; + }; + + gta04_led3: red_power@3 { + label = "gta04:red:power"; + reg = <0x3>; + linux,default-trigger = "default-on"; + }; + + gta04_led4: green_power@4 { + label = "gta04:green:power"; + reg = <0x4>; + }; + }; +}; + +&i2c3 { + clock-frequency = <100000>; +}; + +&usb_otg_hs { + interface-type = <0>; + usb-phy = <&usb2_phy>; + phys = <&usb2_phy>; + phy-names = "usb2-phy"; + mode = <3>; + power = <50>; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <&vmmc1>; + vmmc_aux-supply = <&vsim>; + bus-width = <4>; +}; + +&mmc2 { + status = "disabled"; +}; + +&mmc3 { + status = "disabled"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; +}; + diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi index 2326d11462a..ba1e58b7b7e 100644 --- a/arch/arm/boot/dts/omap3-igep.dtsi +++ b/arch/arm/boot/dts/omap3-igep.dtsi @@ -77,6 +77,8 @@ 0x1a2 (PIN_INPUT | MUX_MODE4) /* mcspi1_cs2.gpio_176 */ >; }; + + leds_pins: pinmux_leds_pins { }; }; &i2c1 { @@ -141,3 +143,12 @@ &twl_gpio { ti,use-leds; }; + +&usb_otg_hs { + interface-type = <0>; + usb-phy = <&usb2_phy>; + phys = <&usb2_phy>; + phy-names = "usb2-phy"; + mode = <3>; + power = <50>; +}; diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts index e8c48284587..d5cc7926725 100644 --- a/arch/arm/boot/dts/omap3-igep0020.dts +++ b/arch/arm/boot/dts/omap3-igep0020.dts @@ -10,13 +10,17 @@ */ #include "omap3-igep.dtsi" +#include "omap-gpmc-smsc911x.dtsi" / { model = "IGEPv2"; compatible = "isee,omap3-igep0020", "ti,omap3"; leds { + pinctrl-names = "default"; + pinctrl-0 = <&leds_pins>; compatible = "gpio-leds"; + boot { label = "omap3:green:boot"; gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; @@ -41,19 +45,56 @@ }; }; - vddvario: regulator-vddvario { - compatible = "regulator-fixed"; - regulator-name = "vddvario"; - regulator-always-on; + /* HS USB Port 1 Power */ + hsusb1_power: hsusb1_power_reg { + compatible = "regulator-fixed"; + regulator-name = "hsusb1_vbus"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&twl_gpio 18 GPIO_ACTIVE_LOW>; /* GPIO LEDA */ + startup-delay-us = <70000>; + }; + + /* HS USB Host PHY on PORT 1 */ + hsusb1_phy: hsusb1_phy { + compatible = "usb-nop-xceiv"; + reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; /* gpio_24 */ + vcc-supply = <&hsusb1_power>; }; +}; - vdd33a: regulator-vdd33a { - compatible = "regulator-fixed"; - regulator-name = "vdd33a"; - regulator-always-on; +&omap3_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = < + &hsusbb1_pins + >; + + hsusbb1_pins: pinmux_hsusbb1_pins { + pinctrl-single,pins = < + 0x5aa (PIN_OUTPUT | MUX_MODE3) /* etk_ctl.hsusb1_clk */ + 0x5a8 (PIN_OUTPUT | MUX_MODE3) /* etk_clk.hsusb1_stp */ + 0x5bc (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d8.hsusb1_dir */ + 0x5be (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d9.hsusb1_nxt */ + 0x5ac (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d0.hsusb1_data0 */ + 0x5ae (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d1.hsusb1_data1 */ + 0x5b0 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d2.hsusb1_data2 */ + 0x5b2 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d3.hsusb1_data7 */ + 0x5b4 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d4.hsusb1_data4 */ + 0x5b6 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d5.hsusb1_data5 */ + 0x5b8 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d6.hsusb1_data6 */ + 0x5ba (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d7.hsusb1_data3 */ + >; }; }; +&leds_pins { + pinctrl-single,pins = < + 0x5c4 (PIN_OUTPUT | MUX_MODE4) /* etk_d12.gpio_26 */ + 0x5c6 (PIN_OUTPUT | MUX_MODE4) /* etk_d13.gpio_27 */ + 0x5c8 (PIN_OUTPUT | MUX_MODE4) /* etk_d14.gpio_28 */ + >; +}; + &i2c3 { clock-frequency = <100000>; @@ -99,59 +140,37 @@ label = "SPL"; reg = <0 0x100000>; }; - partition@0x80000 { + partition@80000 { label = "U-Boot"; reg = <0x100000 0x180000>; }; - partition@0x1c0000 { + partition@1c0000 { label = "Environment"; reg = <0x280000 0x100000>; }; - partition@0x280000 { + partition@280000 { label = "Kernel"; reg = <0x380000 0x300000>; }; - partition@0x780000 { + partition@780000 { label = "Filesystem"; reg = <0x680000 0x1f980000>; }; }; - ethernet@5,0 { + ethernet@gpmc { pinctrl-names = "default"; pinctrl-0 = <&smsc911x_pins>; - compatible = "smsc,lan9221", "smsc,lan9115"; reg = <5 0 0xff>; - bank-width = <2>; - - gpmc,mux-add-data; - gpmc,cs-on-ns = <0>; - gpmc,cs-rd-off-ns = <186>; - gpmc,cs-wr-off-ns = <186>; - gpmc,adv-on-ns = <12>; - gpmc,adv-rd-off-ns = <48>; - gpmc,adv-wr-off-ns = <48>; - gpmc,oe-on-ns = <54>; - gpmc,oe-off-ns = <168>; - gpmc,we-on-ns = <54>; - gpmc,we-off-ns = <168>; - gpmc,rd-cycle-ns = <186>; - gpmc,wr-cycle-ns = <186>; - gpmc,access-ns = <114>; - gpmc,page-burst-access-ns = <6>; - gpmc,bus-turnaround-ns = <12>; - gpmc,cycle2cycle-delay-ns = <18>; - gpmc,wr-data-mux-bus-ns = <90>; - gpmc,wr-access-ns = <186>; - gpmc,cycle2cycle-samecsen; - gpmc,cycle2cycle-diffcsen; - interrupt-parent = <&gpio6>; - interrupts = <16 8>; - vmmc-supply = <&vddvario>; - vmmc_aux-supply = <&vdd33a>; - reg-io-width = <4>; - - smsc,save-mac-address; + interrupts = <16 IRQ_TYPE_LEVEL_LOW>; }; }; + +&usbhshost { + port1-mode = "ehci-phy"; +}; + +&usbhsehci { + phys = <&hsusb1_phy>; +}; diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts index 644d0538383..525e6d9b097 100644 --- a/arch/arm/boot/dts/omap3-igep0030.dts +++ b/arch/arm/boot/dts/omap3-igep0030.dts @@ -16,7 +16,10 @@ compatible = "isee,omap3-igep0030", "ti,omap3"; leds { + pinctrl-names = "default"; + pinctrl-0 = <&leds_pins>; compatible = "gpio-leds"; + boot { label = "omap3:green:boot"; gpios = <&twl_gpio 13 GPIO_ACTIVE_LOW>; @@ -43,6 +46,12 @@ }; }; +&leds_pins { + pinctrl-single,pins = < + 0x5b0 (PIN_OUTPUT | MUX_MODE4) /* etk_d2.gpio_16 */ + >; +}; + &gpmc { ranges = <0 0 0x00000000 0x20000000>; @@ -74,19 +83,19 @@ label = "SPL"; reg = <0 0x100000>; }; - partition@0x80000 { + partition@80000 { label = "U-Boot"; reg = <0x100000 0x180000>; }; - partition@0x1c0000 { + partition@1c0000 { label = "Environment"; reg = <0x280000 0x100000>; }; - partition@0x280000 { + partition@280000 { label = "Kernel"; reg = <0x380000 0x300000>; }; - partition@0x780000 { + partition@780000 { label = "Filesystem"; reg = <0x680000 0x1f980000>; }; diff --git a/arch/arm/boot/dts/omap3-n9.dts b/arch/arm/boot/dts/omap3-n9.dts new file mode 100644 index 00000000000..39828ce464e --- /dev/null +++ b/arch/arm/boot/dts/omap3-n9.dts @@ -0,0 +1,18 @@ +/* + * omap3-n9.dts - Device Tree file for Nokia N9 + * + * Written by: Aaro Koskinen <aaro.koskinen@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +#include "omap3-n950-n9.dtsi" + +/ { + model = "Nokia N9"; + compatible = "nokia,omap3-n9", "ti,omap3"; +}; diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts new file mode 100644 index 00000000000..c4f20bfe4cc --- /dev/null +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -0,0 +1,484 @@ +/* + * Copyright (C) 2013 Pavel Machek <pavel@ucw.cz> + * Copyright 2013 Aaro Koskinen <aaro.koskinen@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 (or later) as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +#include "omap34xx.dtsi" + +/ { + model = "Nokia N900"; + compatible = "nokia,omap3-n900", "ti,omap3"; + + cpus { + cpu@0 { + cpu0-supply = <&vcc>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; + + gpio_keys { + compatible = "gpio-keys"; + + camera_lens_cover { + label = "Camera Lens Cover"; + gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* 110 */ + linux,input-type = <5>; /* EV_SW */ + linux,code = <0x09>; /* SW_CAMERA_LENS_COVER */ + gpio-key,wakeup; + }; + + camera_focus { + label = "Camera Focus"; + gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; /* 68 */ + linux,code = <0x210>; /* KEY_CAMERA_FOCUS */ + gpio-key,wakeup; + }; + + camera_capture { + label = "Camera Capture"; + gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; /* 69 */ + linux,code = <0xd4>; /* KEY_CAMERA */ + gpio-key,wakeup; + }; + + lock_button { + label = "Lock Button"; + gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; /* 113 */ + linux,code = <0x98>; /* KEY_SCREENLOCK */ + gpio-key,wakeup; + }; + + keypad_slide { + label = "Keypad Slide"; + gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; /* 71 */ + linux,input-type = <5>; /* EV_SW */ + linux,code = <0x0a>; /* SW_KEYPAD_SLIDE */ + gpio-key,wakeup; + }; + + proximity_sensor { + label = "Proximity Sensor"; + gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>; /* 89 */ + linux,input-type = <5>; /* EV_SW */ + linux,code = <0x0b>; /* SW_FRONT_PROXIMITY */ + }; + }; + +}; + +&omap3_pmx_core { + pinctrl-names = "default"; + + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + 0x14a (PIN_INPUT | MUX_MODE0) /* uart2_rx */ + 0x148 (PIN_OUTPUT | MUX_MODE0) /* uart2_tx */ + >; + }; + + uart3_pins: pinmux_uart3_pins { + pinctrl-single,pins = < + 0x16e (PIN_INPUT | MUX_MODE0) /* uart3_rx */ + 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx */ + >; + }; + + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + 0x18a (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ + 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ + >; + }; + + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + 0x18e (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */ + 0x190 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */ + >; + }; + + i2c3_pins: pinmux_i2c3_pins { + pinctrl-single,pins = < + 0x192 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */ + 0x194 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */ + >; + }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + 0x114 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk */ + 0x116 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd */ + 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0 */ + 0x11a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1 */ + 0x11c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2 */ + 0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3 */ + >; + }; + + display_pins: pinmux_display_pins { + pinctrl-single,pins = < + 0x0d4 (PIN_OUTPUT | MUX_MODE4) /* RX51_LCD_RESET_GPIO */ + >; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + + clock-frequency = <2200000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + interrupt-parent = <&intc>; + }; +}; + +#include "twl4030.dtsi" +#include "twl4030_omap3.dtsi" + +&vaux1 { + regulator-name = "V28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; /* due battery cover sensor */ +}; + +&vaux2 { + regulator-name = "VCSI"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; +}; + +&vaux3 { + regulator-name = "VMMC2_30"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3000000>; +}; + +&vaux4 { + regulator-name = "VCAM_ANA_28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; +}; + +&vmmc1 { + regulator-name = "VMMC1"; + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <3150000>; +}; + +&vmmc2 { + regulator-name = "V28_A"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; /* due VIO leak to AIC34 VDDs */ +}; + +&vpll1 { + regulator-name = "VPLL"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&vpll2 { + regulator-name = "VSDI_CSI"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&vsim { + regulator-name = "VMMC2_IO_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; +}; + +&vio { + regulator-name = "VIO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + +}; + +&vintana1 { + regulator-name = "VINTANA1"; + /* fixed to 1500000 */ + regulator-always-on; +}; + +&vintana2 { + regulator-name = "VINTANA2"; + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <2750000>; + regulator-always-on; +}; + +&vintdig { + regulator-name = "VINTDIG"; + /* fixed to 1500000 */ + regulator-always-on; +}; + +&twl { + twl_audio: audio { + compatible = "ti,twl4030-audio"; + ti,enable-vibra = <1>; + }; +}; + +&twl_gpio { + ti,pullups = <0x0>; + ti,pulldowns = <0x03ff3f>; /* BIT(0..5) | BIT(8..17) */ +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + + clock-frequency = <100000>; + + tlv320aic3x: tlv320aic3x@18 { + compatible = "ti,tlv320aic3x"; + reg = <0x18>; + gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */ + ai3x-gpio-func = < + 0 /* AIC3X_GPIO1_FUNC_DISABLED */ + 5 /* AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT */ + >; + + AVDD-supply = <&vmmc2>; + DRVDD-supply = <&vmmc2>; + IOVDD-supply = <&vio>; + DVDD-supply = <&vio>; + }; + + tlv320aic3x_aux: tlv320aic3x@19 { + compatible = "ti,tlv320aic3x"; + reg = <0x19>; + gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */ + + AVDD-supply = <&vmmc2>; + DRVDD-supply = <&vmmc2>; + IOVDD-supply = <&vio>; + DVDD-supply = <&vio>; + }; + + lp5523: lp5523@32 { + compatible = "national,lp5523"; + reg = <0x32>; + clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */ + enable-gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */ + + chan0 { + chan-name = "lp5523:kb1"; + led-cur = /bits/ 8 <50>; + max-cur = /bits/ 8 <100>; + }; + + chan1 { + chan-name = "lp5523:kb2"; + led-cur = /bits/ 8 <50>; + max-cur = /bits/ 8 <100>; + }; + + chan2 { + chan-name = "lp5523:kb3"; + led-cur = /bits/ 8 <50>; + max-cur = /bits/ 8 <100>; + }; + + chan3 { + chan-name = "lp5523:kb4"; + led-cur = /bits/ 8 <50>; + max-cur = /bits/ 8 <100>; + }; + + chan4 { + chan-name = "lp5523:b"; + led-cur = /bits/ 8 <50>; + max-cur = /bits/ 8 <100>; + }; + + chan5 { + chan-name = "lp5523:g"; + led-cur = /bits/ 8 <50>; + max-cur = /bits/ 8 <100>; + }; + + chan6 { + chan-name = "lp5523:r"; + led-cur = /bits/ 8 <50>; + max-cur = /bits/ 8 <100>; + }; + + chan7 { + chan-name = "lp5523:kb5"; + led-cur = /bits/ 8 <50>; + max-cur = /bits/ 8 <100>; + }; + + chan8 { + chan-name = "lp5523:kb6"; + led-cur = /bits/ 8 <50>; + max-cur = /bits/ 8 <100>; + }; + }; + + bq27200: bq27200@55 { + compatible = "ti,bq27200"; + reg = <0x55>; + }; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; + + clock-frequency = <400000>; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <&vmmc1>; + bus-width = <4>; + cd-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* 160 */ +}; + +&mmc2 { + status = "disabled"; +}; + +&mmc3 { + status = "disabled"; +}; + +&gpmc { + ranges = <0 0 0x04000000 0x10000000>; /* 256MB */ + + /* gpio-irq for dma: 65 */ + + onenand@0,0 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0 0 0x10000000>; + + gpmc,sync-read; + gpmc,sync-write; + gpmc,burst-length = <16>; + gpmc,burst-read; + gpmc,burst-wrap; + gpmc,burst-write; + gpmc,device-width = <2>; /* GPMC_DEVWIDTH_16BIT */ + gpmc,mux-add-data = <2>; /* GPMC_MUX_AD */ + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <87>; + gpmc,cs-wr-off-ns = <87>; + gpmc,adv-on-ns = <0>; + gpmc,adv-rd-off-ns = <10>; + gpmc,adv-wr-off-ns = <10>; + gpmc,oe-on-ns = <15>; + gpmc,oe-off-ns = <87>; + gpmc,we-on-ns = <0>; + gpmc,we-off-ns = <87>; + gpmc,rd-cycle-ns = <112>; + gpmc,wr-cycle-ns = <112>; + gpmc,access-ns = <81>; + gpmc,page-burst-access-ns = <15>; + gpmc,bus-turnaround-ns = <0>; + gpmc,cycle2cycle-delay-ns = <0>; + gpmc,wait-monitoring-ns = <0>; + gpmc,clk-activation-ns = <5>; + gpmc,wr-data-mux-bus-ns = <30>; + gpmc,wr-access-ns = <81>; + gpmc,sync-clk-ps = <15000>; + + /* + * MTD partition table corresponding to Nokia's + * Maemo 5 (Fremantle) release. + */ + partition@0 { + label = "bootloader"; + reg = <0x00000000 0x00020000>; + read-only; + }; + partition@1 { + label = "config"; + reg = <0x00020000 0x00060000>; + }; + partition@2 { + label = "log"; + reg = <0x00080000 0x00040000>; + }; + partition@3 { + label = "kernel"; + reg = <0x000c0000 0x00200000>; + }; + partition@4 { + label = "initfs"; + reg = <0x002c0000 0x00200000>; + }; + partition@5 { + label = "rootfs"; + reg = <0x004c0000 0x0fb40000>; + }; + }; +}; + +&mcspi1 { + /* + * For some reason, touchscreen is necessary for screen to work at + * all on real hw. It works well without it on emulator. + * + * Also... order in the device tree actually matters here. + */ + tsc2005@0 { + compatible = "tsc2005"; + spi-max-frequency = <6000000>; + reg = <0>; + }; + mipid@2 { + compatible = "acx565akm"; + spi-max-frequency = <6000000>; + reg = <2>; + + pinctrl-names = "default"; + pinctrl-0 = <&display_pins>; + }; +}; + +&usb_otg_hs { + interface-type = <0>; + usb-phy = <&usb2_phy>; + phys = <&usb2_phy>; + phy-names = "usb2-phy"; + mode = <2>; + power = <50>; +}; + +&uart1 { + status = "disabled"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; +}; diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi new file mode 100644 index 00000000000..94eb77d3b9d --- /dev/null +++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi @@ -0,0 +1,174 @@ +/* + * omap3-n950-n9.dtsi - Device Tree file for Nokia N950 & N9 (common stuff) + * + * Written by: Aaro Koskinen <aaro.koskinen@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "omap36xx.dtsi" + +/ { + cpus { + cpu@0 { + cpu0-supply = <&vcc>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x40000000>; /* 1 GB */ + }; + + vemmc: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "VEMMC"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + gpio = <&gpio5 29 0>; /* gpio line 157 */ + startup-delay-us = <150>; + enable-active-high; + }; +}; + +&omap3_pmx_core { + mmc2_pins: pinmux_mmc2_pins { + pinctrl-single,pins = < + 0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */ + 0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */ + 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */ + 0x12e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */ + 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */ + 0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */ + >; + }; +}; + +&i2c1 { + clock-frequency = <2900000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + interrupt-parent = <&intc>; + }; +}; + +/include/ "twl4030.dtsi" + +&twl { + compatible = "ti,twl5031"; +}; + +&twl_gpio { + ti,pullups = <0x000001>; /* BIT(0) */ + ti,pulldowns = <0x008106>; /* BIT(1) | BIT(2) | BIT(8) | BIT(15) */ +}; + +&i2c2 { + clock-frequency = <400000>; +}; + +&i2c3 { + clock-frequency = <400000>; +}; + +&mmc1 { + status = "disabled"; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + vmmc-supply = <&vemmc>; + bus-width = <4>; + ti,non-removable; +}; + +&mmc3 { + status = "disabled"; +}; + +&usb_otg_hs { + interface-type = <0>; + usb-phy = <&usb2_phy>; + phys = <&usb2_phy>; + phy-names = "usb2-phy"; + mode = <3>; + power = <50>; +}; + +&gpmc { + ranges = <0 0 0x04000000 0x20000000>; + + onenand@0,0 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0 0 0x20000000>; + + gpmc,sync-read; + gpmc,sync-write; + gpmc,burst-length = <16>; + gpmc,burst-read; + gpmc,burst-wrap; + gpmc,burst-write; + gpmc,device-width = <2>; + gpmc,mux-add-data = <2>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <87>; + gpmc,cs-wr-off-ns = <87>; + gpmc,adv-on-ns = <0>; + gpmc,adv-rd-off-ns = <10>; + gpmc,adv-wr-off-ns = <10>; + gpmc,oe-on-ns = <15>; + gpmc,oe-off-ns = <87>; + gpmc,we-on-ns = <0>; + gpmc,we-off-ns = <87>; + gpmc,rd-cycle-ns = <112>; + gpmc,wr-cycle-ns = <112>; + gpmc,access-ns = <81>; + gpmc,page-burst-access-ns = <15>; + gpmc,bus-turnaround-ns = <0>; + gpmc,cycle2cycle-delay-ns = <0>; + gpmc,wait-monitoring-ns = <0>; + gpmc,clk-activation-ns = <5>; + gpmc,wr-data-mux-bus-ns = <30>; + gpmc,wr-access-ns = <81>; + gpmc,sync-clk-ps = <15000>; + + /* + * MTD partition table corresponding to Nokia's MeeGo 1.2 + * Harmattan release. + */ + partition@0 { + label = "bootloader"; + reg = <0x00000000 0x00100000>; + }; + partition@1 { + label = "config"; + reg = <0x00100000 0x002c0000>; + }; + partition@2 { + label = "kernel"; + reg = <0x003c0000 0x01000000>; + }; + partition@3 { + label = "log"; + reg = <0x013c0000 0x00200000>; + }; + partition@4 { + label = "var"; + reg = <0x015c0000 0x1ca40000>; + }; + partition@5 { + label = "moslo"; + reg = <0x1e000000 0x02000000>; + }; + partition@6 { + label = "omap2-onenand"; + reg = <0x00000000 0x20000000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap3-n950.dts b/arch/arm/boot/dts/omap3-n950.dts new file mode 100644 index 00000000000..b076a526b99 --- /dev/null +++ b/arch/arm/boot/dts/omap3-n950.dts @@ -0,0 +1,18 @@ +/* + * omap3-n950.dts - Device Tree file for Nokia N950 + * + * Written by: Aaro Koskinen <aaro.koskinen@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +#include "omap3-n950-n9.dtsi" + +/ { + model = "Nokia N950"; + compatible = "nokia,omap3-n950", "ti,omap3"; +}; diff --git a/arch/arm/boot/dts/omap3-overo.dtsi b/arch/arm/boot/dts/omap3-overo.dtsi index 8f1abec7827..a461d2fd1fb 100644 --- a/arch/arm/boot/dts/omap3-overo.dtsi +++ b/arch/arm/boot/dts/omap3-overo.dtsi @@ -76,6 +76,8 @@ &usb_otg_hs { interface-type = <0>; usb-phy = <&usb2_phy>; + phys = <&usb2_phy>; + phy-names = "usb2-phy"; mode = <3>; power = <50>; }; diff --git a/arch/arm/boot/dts/omap3-zoom3.dts b/arch/arm/boot/dts/omap3-zoom3.dts new file mode 100644 index 00000000000..15eb9fe5169 --- /dev/null +++ b/arch/arm/boot/dts/omap3-zoom3.dts @@ -0,0 +1,217 @@ +/* + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "omap36xx.dtsi" +#include "omap-zoom-common.dtsi" + +/ { + model = "TI Zoom3"; + compatible = "ti,omap3-zoom3", "ti,omap36xx", "ti,omap3"; + + cpus { + cpu@0 { + cpu0-supply = <&vcc>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x20000000>; /* 512 MB */ + }; + + vddvario: regulator-vddvario { + compatible = "regulator-fixed"; + regulator-name = "vddvario"; + regulator-always-on; + }; + + vdd33a: regulator-vdd33a { + compatible = "regulator-fixed"; + regulator-name = "vdd33a"; + regulator-always-on; + }; + + wl12xx_vmmc: wl12xx_vmmc { + pinctrl-names = "default"; + pinctrl-0 = <&wl12xx_gpio>; + compatible = "regulator-fixed"; + regulator-name = "vwl1271"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio4 5 0>; /* gpio101 */ + startup-delay-us = <70000>; + enable-active-high; + }; +}; + +&omap3_pmx_core { + /* REVISIT: twl gpio0 is mmc0_cd */ + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + 0x114 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ + 0x116 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ + 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ + 0x11a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ + 0x11c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ + 0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ + >; + }; + + mmc2_pins: pinmux_mmc2_pins { + pinctrl-single,pins = < + 0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */ + 0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */ + 0x12c (PIN_INPUT | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */ + 0x12e (PIN_INPUT | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */ + 0x130 (PIN_INPUT | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */ + 0x132 (PIN_INPUT | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */ + 0x134 (PIN_INPUT | MUX_MODE0) /* sdmmc2_dat4.sdmmc2_dat4 */ + 0x136 (PIN_INPUT | MUX_MODE0) /* sdmmc2_dat5.sdmmc2_dat5 */ + 0x138 (PIN_INPUT | MUX_MODE0) /* sdmmc2_dat6.sdmmc2_dat6 */ + 0x13a (PIN_INPUT | MUX_MODE0) /* sdmmc2_dat7.sdmmc2_dat7 */ + >; + }; + + mmc3_pins: pinmux_mmc3_pins { + pinctrl-single,pins = < + 0x168 (PIN_INPUT | MUX_MODE4) /* mcbsp1_clkx.gpio_162 WLAN IRQ */ + 0x1a0 (PIN_INPUT_PULLUP | MUX_MODE3) /* mcspi1_cs1.sdmmc3_cmd */ + 0x5a8 (PIN_INPUT_PULLUP | MUX_MODE2) /* etk_clk.sdmmc3_clk */ + 0x5b4 (PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d4.sdmmc3_dat0 */ + 0x5b6 (WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d5.sdmmc3_dat1 */ + 0x5b8 (PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d6.sdmmc3_dat2 */ + 0x5b2 (PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d3.sdmmc3_dat3 */ + >; + }; + + uart1_pins: pinmux_uart1_pins { + pinctrl-single,pins = < + 0x150 (PIN_INPUT | MUX_MODE0) /* uart1_cts.uart1_cts */ + 0x14e (PIN_OUTPUT | MUX_MODE0) /* uart1_rts.uart1_rts */ + 0x152 (WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */ + 0x14c (PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_tx */ + >; + }; + + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + 0x144 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts */ + 0x146 (PIN_OUTPUT | MUX_MODE0) /* uart2_rts.uart2_rts */ + 0x14a (WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */ + 0x148 (PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */ + >; + }; + + uart3_pins: pinmux_uart3_pins { + pinctrl-single,pins = < + 0x16a (PIN_INPUT_PULLDOWN | MUX_MODE0) /* uart3_cts_rctx.uart3_cts_rctx */ + 0x16c (PIN_OUTPUT | MUX_MODE0) /* uart3_rts_sd.uart3_rts_sd */ + 0x16e (WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ + 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ + >; + }; + + /* wl12xx GPIO output for WLAN_EN */ + wl12xx_gpio: pinmux_wl12xx_gpio { + pinctrl-single,pins = < + 0xea (PIN_OUTPUT| MUX_MODE4) /* cam_d2.gpio_101 */ + >; + }; +}; + +&omap3_pmx_wkup { + wlan_host_wkup: pinmux_wlan_host_wkup_pins { + pinctrl-single,pins = < + 0x1a (PIN_INPUT_PULLUP | MUX_MODE4) /* sys_clkout1.gpio_10 WLAN_HOST_WKUP */ + >; + }; +}; + +&i2c1 { + clock-frequency = <2600000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + interrupt-parent = <&intc>; + }; +}; + +#include "twl4030.dtsi" + +&i2c2 { + clock-frequency = <400000>; +}; + +&i2c3 { + clock-frequency = <400000>; + + /* + * TVP5146 Video decoder-in for analog input support. + */ + tvp5146@5c { + compatible = "ti,tvp5146m2"; + reg = <0x5c>; + }; +}; + +&twl_gpio { + ti,use-leds; +}; + +&mmc1 { + vmmc-supply = <&vmmc1>; + vmmc_aux-supply = <&vsim>; + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; +}; +/* +&mmc2 { + vmmc-supply = <&vmmc2>; + ti,non-removable; + bus-width = <8>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; +}; +*/ +&mmc3 { + vmmc-supply = <&wl12xx_vmmc>; + non-removable; + bus-width = <4>; + cap-power-off-card; + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins>; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; +}; + +&uart4 { + status = "disabled"; +}; + +&usb_otg_hs { + interface-type = <0>; + usb-phy = <&usb2_phy>; + mode = <3>; + power = <50>; +}; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index b41bd57f432..f3a0c26ed0c 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -19,6 +19,9 @@ interrupt-parent = <&intc>; aliases { + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; serial0 = &uart1; serial1 = &uart2; serial2 = &uart3; @@ -37,6 +40,7 @@ pmu { compatible = "arm,cortex-a8-pmu"; + reg = <0x54000000 0x800000>; interrupts = <3>; ti,hwmods = "debugss"; }; @@ -71,6 +75,8 @@ */ ocp { compatible = "simple-bus"; + reg = <0x68000000 0x10000>; + interrupts = <9 10>; #address-cells = <1>; #size-cells = <1>; ranges; @@ -107,15 +113,19 @@ reg = <0x48002030 0x05cc>; #address-cells = <1>; #size-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; pinctrl-single,register-width = <16>; pinctrl-single,function-mask = <0xff1f>; }; - omap3_pmx_wkup: pinmux@0x48002a00 { + omap3_pmx_wkup: pinmux@48002a00 { compatible = "ti,omap3-padconf", "pinctrl-single"; reg = <0x48002a00 0x5c>; #address-cells = <1>; #size-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; pinctrl-single,register-width = <16>; pinctrl-single,function-mask = <0xff1f>; }; @@ -189,24 +199,40 @@ uart1: serial@4806a000 { compatible = "ti,omap3-uart"; + reg = <0x4806a000 0x2000>; + interrupts = <72>; + dmas = <&sdma 49 &sdma 50>; + dma-names = "tx", "rx"; ti,hwmods = "uart1"; clock-frequency = <48000000>; }; uart2: serial@4806c000 { compatible = "ti,omap3-uart"; + reg = <0x4806c000 0x400>; + interrupts = <73>; + dmas = <&sdma 51 &sdma 52>; + dma-names = "tx", "rx"; ti,hwmods = "uart2"; clock-frequency = <48000000>; }; uart3: serial@49020000 { compatible = "ti,omap3-uart"; + reg = <0x49020000 0x400>; + interrupts = <74>; + dmas = <&sdma 53 &sdma 54>; + dma-names = "tx", "rx"; ti,hwmods = "uart3"; clock-frequency = <48000000>; }; i2c1: i2c@48070000 { compatible = "ti,omap3-i2c"; + reg = <0x48070000 0x80>; + interrupts = <56>; + dmas = <&sdma 27 &sdma 28>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c1"; @@ -214,6 +240,10 @@ i2c2: i2c@48072000 { compatible = "ti,omap3-i2c"; + reg = <0x48072000 0x80>; + interrupts = <57>; + dmas = <&sdma 29 &sdma 30>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c2"; @@ -221,6 +251,10 @@ i2c3: i2c@48060000 { compatible = "ti,omap3-i2c"; + reg = <0x48060000 0x80>; + interrupts = <61>; + dmas = <&sdma 25 &sdma 26>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c3"; @@ -228,6 +262,8 @@ mcspi1: spi@48098000 { compatible = "ti,omap2-mcspi"; + reg = <0x48098000 0x100>; + interrupts = <65>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi1"; @@ -246,6 +282,8 @@ mcspi2: spi@4809a000 { compatible = "ti,omap2-mcspi"; + reg = <0x4809a000 0x100>; + interrupts = <66>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi2"; @@ -259,6 +297,8 @@ mcspi3: spi@480b8000 { compatible = "ti,omap2-mcspi"; + reg = <0x480b8000 0x100>; + interrupts = <91>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi3"; @@ -272,6 +312,8 @@ mcspi4: spi@480ba000 { compatible = "ti,omap2-mcspi"; + reg = <0x480ba000 0x100>; + interrupts = <48>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi4"; @@ -280,8 +322,17 @@ dma-names = "tx0", "rx0"; }; + hdqw1w: 1w@480b2000 { + compatible = "ti,omap3-1w"; + reg = <0x480b2000 0x1000>; + interrupts = <58>; + ti,hwmods = "hdq1w"; + }; + mmc1: mmc@4809c000 { compatible = "ti,omap3-hsmmc"; + reg = <0x4809c000 0x200>; + interrupts = <83>; ti,hwmods = "mmc1"; ti,dual-volt; dmas = <&sdma 61>, <&sdma 62>; @@ -290,6 +341,8 @@ mmc2: mmc@480b4000 { compatible = "ti,omap3-hsmmc"; + reg = <0x480b4000 0x200>; + interrupts = <86>; ti,hwmods = "mmc2"; dmas = <&sdma 47>, <&sdma 48>; dma-names = "tx", "rx"; @@ -297,6 +350,8 @@ mmc3: mmc@480ad000 { compatible = "ti,omap3-hsmmc"; + reg = <0x480ad000 0x200>; + interrupts = <94>; ti,hwmods = "mmc3"; dmas = <&sdma 77>, <&sdma 78>; dma-names = "tx", "rx"; @@ -304,6 +359,7 @@ wdt2: wdt@48314000 { compatible = "ti,omap3-wdt"; + reg = <0x48314000 0x80>; ti,hwmods = "wd_timer2"; }; diff --git a/arch/arm/boot/dts/omap3430-sdp.dts b/arch/arm/boot/dts/omap3430-sdp.dts index e2249bcc3e6..281914ed015 100644 --- a/arch/arm/boot/dts/omap3430-sdp.dts +++ b/arch/arm/boot/dts/omap3430-sdp.dts @@ -84,15 +84,15 @@ label = "bootloader-nor"; reg = <0 0x40000>; }; - partition@0x40000 { + partition@40000 { label = "params-nor"; reg = <0x40000 0x40000>; }; - partition@0x80000 { + partition@80000 { label = "kernel-nor"; reg = <0x80000 0x200000>; }; - partition@0x280000 { + partition@280000 { label = "filesystem-nor"; reg = <0x240000 0x7d80000>; }; @@ -125,19 +125,19 @@ label = "xloader-nand"; reg = <0 0x80000>; }; - partition@0x80000 { + partition@80000 { label = "bootloader-nand"; reg = <0x80000 0x140000>; }; - partition@0x1c0000 { + partition@1c0000 { label = "params-nand"; reg = <0x1c0000 0xc0000>; }; - partition@0x280000 { + partition@280000 { label = "kernel-nand"; reg = <0x280000 0x500000>; }; - partition@0x780000 { + partition@780000 { label = "filesystem-nand"; reg = <0x780000 0x7880000>; }; @@ -170,19 +170,19 @@ label = "xloader-onenand"; reg = <0 0x80000>; }; - partition@0x80000 { + partition@80000 { label = "bootloader-onenand"; reg = <0x80000 0x40000>; }; - partition@0xc0000 { + partition@c0000 { label = "params-onenand"; reg = <0xc0000 0x20000>; }; - partition@0xe0000 { + partition@e0000 { label = "kernel-onenand"; reg = <0xe0000 0x200000>; }; - partition@0x2e0000 { + partition@2e0000 { label = "filesystem-onenand"; reg = <0x2e0000 0xfd20000>; }; diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi index f8b3765eb9b..380c22eb468 100644 --- a/arch/arm/boot/dts/omap36xx.dtsi +++ b/arch/arm/boot/dts/omap36xx.dtsi @@ -31,6 +31,10 @@ ocp { uart4: serial@49042000 { compatible = "ti,omap3-uart"; + reg = <0x49042000 0x400>; + interrupts = <80>; + dmas = <&sdma 81 &sdma 82>; + dma-names = "tx", "rx"; ti,hwmods = "uart4"; clock-frequency = <48000000>; }; diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index 814ab67c8c2..298e85020e1 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -60,22 +60,6 @@ "AFMR", "Line In"; }; - /* - * Temp hack: Need to be replaced with the proper gpio-controlled - * reset driver as soon it will be merged. - * http://thread.gmane.org/gmane.linux.drivers.devicetree/36830 - */ - /* HS USB Port 1 RESET */ - hsusb1_reset: hsusb1_reset_reg { - compatible = "regulator-fixed"; - regulator-name = "hsusb1_reset"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio2 30 0>; /* gpio_62 */ - startup-delay-us = <70000>; - enable-active-high; - }; - /* HS USB Port 1 Power */ hsusb1_power: hsusb1_power_reg { compatible = "regulator-fixed"; @@ -97,7 +81,7 @@ /* HS USB Host PHY on PORT 1 */ hsusb1_phy: hsusb1_phy { compatible = "usb-nop-xceiv"; - reset-supply = <&hsusb1_reset>; + reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; /* gpio_62 */ vcc-supply = <&hsusb1_power>; /** * FIXME: @@ -122,37 +106,19 @@ }; }; -&omap4_pmx_wkup { - pinctrl-names = "default"; - pinctrl-0 = < - &twl6030_wkup_pins - >; - - twl6030_wkup_pins: pinmux_twl6030_wkup_pins { - pinctrl-single,pins = < - 0x14 (PIN_OUTPUT | MUX_MODE2) /* fref_clk0_out.sys_drm_msecure */ - >; - }; -}; - &omap4_pmx_core { pinctrl-names = "default"; pinctrl-0 = < - &twl6030_pins &twl6040_pins &mcpdm_pins &mcbsp1_pins + &dss_dpi_pins + &tfp410_pins &dss_hdmi_pins &tpd12s015_pins &hsusbb1_pins >; - twl6030_pins: pinmux_twl6030_pins { - pinctrl-single,pins = < - 0x15e (WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq1.sys_nirq1 */ - >; - }; - twl6040_pins: pinmux_twl6040_pins { pinctrl-single,pins = < 0xe0 (PIN_OUTPUT | MUX_MODE3) /* hdq_sio.gpio_127 */ @@ -179,6 +145,47 @@ >; }; + dss_dpi_pins: pinmux_dss_dpi_pins { + pinctrl-single,pins = < + 0x122 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data23 */ + 0x124 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data22 */ + 0x126 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data21 */ + 0x128 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data20 */ + 0x12a (PIN_OUTPUT | MUX_MODE5) /* dispc2_data19 */ + 0x12c (PIN_OUTPUT | MUX_MODE5) /* dispc2_data18 */ + 0x12e (PIN_OUTPUT | MUX_MODE5) /* dispc2_data15 */ + 0x130 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data14 */ + 0x132 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data13 */ + 0x134 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data12 */ + 0x136 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data11 */ + + 0x174 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data10 */ + 0x176 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data9 */ + 0x178 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data16 */ + 0x17a (PIN_OUTPUT | MUX_MODE5) /* dispc2_data17 */ + 0x17c (PIN_OUTPUT | MUX_MODE5) /* dispc2_hsync */ + 0x17e (PIN_OUTPUT | MUX_MODE5) /* dispc2_pclk */ + 0x180 (PIN_OUTPUT | MUX_MODE5) /* dispc2_vsync */ + 0x182 (PIN_OUTPUT | MUX_MODE5) /* dispc2_de */ + 0x184 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data8 */ + 0x186 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data7 */ + 0x188 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data6 */ + 0x18a (PIN_OUTPUT | MUX_MODE5) /* dispc2_data5 */ + 0x18c (PIN_OUTPUT | MUX_MODE5) /* dispc2_data4 */ + 0x18e (PIN_OUTPUT | MUX_MODE5) /* dispc2_data3 */ + + 0x190 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data2 */ + 0x192 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data1 */ + 0x194 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data0 */ + >; + }; + + tfp410_pins: pinmux_tfp410_pins { + pinctrl-single,pins = < + 0x144 (PIN_OUTPUT | MUX_MODE3) /* gpio_0 */ + >; + }; + dss_hdmi_pins: pinmux_dss_hdmi_pins { pinctrl-single,pins = < 0x5a (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */ @@ -305,6 +312,7 @@ }; #include "twl6030.dtsi" +#include "twl6030_omap4.dtsi" &i2c2 { pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts index 56c435468e9..816d1c95b59 100644 --- a/arch/arm/boot/dts/omap4-panda-es.dts +++ b/arch/arm/boot/dts/omap4-panda-es.dts @@ -62,3 +62,7 @@ gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; }; }; + +&gpio1 { + ti,no-reset-on-init; +}; diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index 4f78380ecdb..5fc3f43c5a8 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -155,23 +155,9 @@ }; }; -&omap4_pmx_wkup { - pinctrl-names = "default"; - pinctrl-0 = < - &twl6030_wkup_pins - >; - - twl6030_wkup_pins: pinmux_twl6030_wkup_pins { - pinctrl-single,pins = < - 0x14 (PIN_OUTPUT | MUX_MODE2) /* fref_clk0_out.sys_drm_msecure */ - >; - }; -}; - &omap4_pmx_core { pinctrl-names = "default"; pinctrl-0 = < - &twl6030_pins &twl6040_pins &mcpdm_pins &dmic_pins @@ -206,12 +192,6 @@ >; }; - twl6030_pins: pinmux_twl6030_pins { - pinctrl-single,pins = < - 0x15e (WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq1.sys_nirq1 */ - >; - }; - twl6040_pins: pinmux_twl6040_pins { pinctrl-single,pins = < 0xe0 (PIN_OUTPUT | MUX_MODE3) /* hdq_sio.gpio_127 */ @@ -370,6 +350,7 @@ }; #include "twl6030.dtsi" +#include "twl6030_omap4.dtsi" &i2c2 { pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 22d9f2b593d..a1e05853afc 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -17,6 +17,10 @@ interrupt-parent = <&gic>; aliases { + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; + i2c3 = &i2c4; serial0 = &uart1; serial1 = &uart2; serial2 = &uart3; @@ -56,7 +60,7 @@ cache-level = <2>; }; - local-timer@0x48240600 { + local-timer@48240600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0x48240600 0x20>; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>; @@ -114,6 +118,8 @@ reg = <0x4a100040 0x0196>; #address-cells = <1>; #size-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; pinctrl-single,register-width = <16>; pinctrl-single,function-mask = <0x7fff>; }; @@ -122,6 +128,8 @@ reg = <0x4a31e040 0x0038>; #address-cells = <1>; #size-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; pinctrl-single,register-width = <16>; pinctrl-single,function-mask = <0x7fff>; }; @@ -214,6 +222,7 @@ gpmc,num-cs = <8>; gpmc,num-waitpins = <4>; ti,hwmods = "gpmc"; + ti,no-idle-on-init; }; uart1: serial@4806a000 { @@ -248,6 +257,12 @@ clock-frequency = <48000000>; }; + hwspinlock: spinlock@4a0f6000 { + compatible = "ti,omap4-hwspinlock"; + reg = <0x4a0f6000 0x1000>; + ti,hwmods = "spinlock"; + }; + i2c1: i2c@48070000 { compatible = "ti,omap4-i2c"; reg = <0x48070000 0x100>; @@ -492,6 +507,7 @@ reg = <0x4c000000 0x100>; interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "emif1"; + ti,no-idle-on-init; phy-type = <1>; hw-caps-read-idle-ctrl; hw-caps-ll-interface; @@ -503,6 +519,7 @@ reg = <0x4d000000 0x100>; interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "emif2"; + ti,no-idle-on-init; phy-type = <1>; hw-caps-read-idle-ctrl; hw-caps-ll-interface; @@ -519,7 +536,8 @@ usb2_phy: usb2phy@4a0ad080 { compatible = "ti,omap-usb2"; reg = <0x4a0ad080 0x58>; - ctrl-module = <&omap_control_usb>; + ctrl-module = <&omap_control_usb2phy>; + #phy-cells = <0>; }; }; @@ -643,12 +661,16 @@ }; }; - omap_control_usb: omap-control-usb@4a002300 { - compatible = "ti,omap-control-usb"; - reg = <0x4a002300 0x4>, - <0x4a00233c 0x4>; - reg-names = "control_dev_conf", "otghs_control"; - ti,type = <1>; + omap_control_usb2phy: control-phy@4a002300 { + compatible = "ti,control-phy-usb2"; + reg = <0x4a002300 0x4>; + reg-names = "power"; + }; + + omap_control_usbotg: control-phy@4a00233c { + compatible = "ti,control-phy-otghs"; + reg = <0x4a00233c 0x4>; + reg-names = "otghs_control"; }; usb_otg_hs: usb_otg_hs@4a0ab000 { @@ -658,10 +680,30 @@ interrupt-names = "mc", "dma"; ti,hwmods = "usb_otg_hs"; usb-phy = <&usb2_phy>; + phys = <&usb2_phy>; + phy-names = "usb2-phy"; multipoint = <1>; num-eps = <16>; ram-bits = <12>; - ti,has-mailbox; + ctrl-module = <&omap_control_usbotg>; + }; + + aes: aes@4b501000 { + compatible = "ti,omap4-aes"; + ti,hwmods = "aes"; + reg = <0x4b501000 0xa0>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 111>, <&sdma 110>; + dma-names = "tx", "rx"; + }; + + des: des@480a5000 { + compatible = "ti,omap4-des"; + ti,hwmods = "des"; + reg = <0x480a5000 0xa0>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 117>, <&sdma 116>; + dma-names = "tx", "rx"; }; }; }; diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts index 65d7b601651..002fa70180a 100644 --- a/arch/arm/boot/dts/omap5-uevm.dts +++ b/arch/arm/boot/dts/omap5-uevm.dts @@ -27,21 +27,10 @@ regulator-max-microvolt = <3000000>; }; - /* HS USB Port 2 RESET */ - hsusb2_reset: hsusb2_reset_reg { - compatible = "regulator-fixed"; - regulator-name = "hsusb2_reset"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>; /* gpio3_80 HUB_NRESET */ - startup-delay-us = <70000>; - enable-active-high; - }; - /* HS USB Host PHY on PORT 2 */ hsusb2_phy: hsusb2_phy { compatible = "usb-nop-xceiv"; - reset-supply = <&hsusb2_reset>; + reset-gpios = <&gpio3 16 GPIO_ACTIVE_LOW>; /* gpio3_80 HUB_NRESET */ /** * FIXME * Put the right clock phandle here when available @@ -51,21 +40,10 @@ clock-frequency = <19200000>; }; - /* HS USB Port 3 RESET */ - hsusb3_reset: hsusb3_reset_reg { - compatible = "regulator-fixed"; - regulator-name = "hsusb3_reset"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio3 15 GPIO_ACTIVE_HIGH>; /* gpio3_79 ETH_NRESET */ - startup-delay-us = <70000>; - enable-active-high; - }; - /* HS USB Host PHY on PORT 3 */ hsusb3_phy: hsusb3_phy { compatible = "usb-nop-xceiv"; - reset-supply = <&hsusb3_reset>; + reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; /* gpio3_79 ETH_NRESET */ }; leds { @@ -84,7 +62,6 @@ pinctrl-0 = < &twl6040_pins &mcpdm_pins - &dmic_pins &mcbsp1_pins &mcbsp2_pins &usbhost_pins @@ -93,7 +70,7 @@ twl6040_pins: pinmux_twl6040_pins { pinctrl-single,pins = < - 0x18a (PIN_OUTPUT | MUX_MODE6) /* perslimbus2_clock.gpio5_145 */ + 0x17e (PIN_OUTPUT | MUX_MODE6) /* mcspi1_somi.gpio5_141 */ >; }; @@ -107,15 +84,6 @@ >; }; - dmic_pins: pinmux_dmic_pins { - pinctrl-single,pins = < - 0x144 (PIN_INPUT | MUX_MODE0) /* abedmic_din1.abedmic_din1 */ - 0x146 (PIN_INPUT | MUX_MODE0) /* abedmic_din2.abedmic_din2 */ - 0x148 (PIN_INPUT | MUX_MODE0) /* abedmic_din3.abedmic_din3 */ - 0x14a (PIN_OUTPUT | MUX_MODE0) /* abedmic_clk1.abedmic_clk1 */ - >; - }; - mcbsp1_pins: pinmux_mcbsp1_pins { pinctrl-single,pins = < 0x14c (PIN_INPUT | MUX_MODE1) /* abedmic_clk2.abemcbsp1_fsx */ @@ -153,25 +121,25 @@ 0xbc (PIN_INPUT | MUX_MODE0) /* mcspi2_clk */ 0xbe (PIN_INPUT | MUX_MODE0) /* mcspi2_simo */ 0xc0 (PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi2_somi */ - 0xc2 (PIN_OUTPUT | MUX_MODE0) /* mcspi2_cs */ + 0xc2 (PIN_OUTPUT | MUX_MODE0) /* mcspi2_cs0 */ >; }; mcspi3_pins: pinmux_mcspi3_pins { pinctrl-single,pins = < - 0x78 (PIN_INPUT | MUX_MODE1) /* mcspi2_somi */ - 0x7a (PIN_INPUT | MUX_MODE1) /* mcspi2_cs */ - 0x7c (PIN_INPUT | MUX_MODE1) /* mcspi2_simo */ - 0x7e (PIN_INPUT | MUX_MODE1) /* mcspi2_clk */ + 0x78 (PIN_INPUT | MUX_MODE1) /* mcspi3_somi */ + 0x7a (PIN_INPUT | MUX_MODE1) /* mcspi3_cs0 */ + 0x7c (PIN_INPUT | MUX_MODE1) /* mcspi3_simo */ + 0x7e (PIN_INPUT | MUX_MODE1) /* mcspi3_clk */ >; }; mcspi4_pins: pinmux_mcspi4_pins { pinctrl-single,pins = < - 0x164 (PIN_INPUT | MUX_MODE1) /* mcspi2_clk */ - 0x168 (PIN_INPUT | MUX_MODE1) /* mcspi2_simo */ - 0x16a (PIN_INPUT | MUX_MODE1) /* mcspi2_somi */ - 0x16c (PIN_INPUT | MUX_MODE1) /* mcspi2_cs */ + 0x164 (PIN_INPUT | MUX_MODE1) /* mcspi4_clk */ + 0x168 (PIN_INPUT | MUX_MODE1) /* mcspi4_simo */ + 0x16a (PIN_INPUT | MUX_MODE1) /* mcspi4_somi */ + 0x16c (PIN_INPUT | MUX_MODE1) /* mcspi4_cs0 */ >; }; @@ -271,6 +239,14 @@ reg = <0x48>; interrupt-controller; #interrupt-cells = <2>; + ti,system-power-controller; + + extcon_usb3: palmas_usb { + compatible = "ti,palmas-usb-vid"; + ti,enable-vbus-detection; + ti,enable-id-detection; + ti,wakeup; + }; palmas_pmic { compatible = "ti,palmas-pmic"; @@ -334,15 +310,22 @@ ti,smps-range = <0x80>; }; - smps10_reg: smps10 { + smps10_out2_reg: smps10_out2 { /* VBUS_5V_OTG */ - regulator-name = "smps10"; + regulator-name = "smps10_out2"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-always-on; regulator-boot-on; }; + smps10_out1_reg: smps10_out1 { + /* VBUS_5V_OTG */ + regulator-name = "smps10_out1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + ldo1_reg: ldo1 { /* VDDAPHY_CAM: vdda_csiport */ regulator-name = "ldo1"; @@ -470,6 +453,11 @@ phys = <0 &hsusb2_phy &hsusb3_phy>; }; +&usb3 { + extcon = <&extcon_usb3>; + vbus-supply = <&smps10_out1_reg>; +}; + &mcspi1 { }; @@ -503,3 +491,7 @@ pinctrl-names = "default"; pinctrl-0 = <&uart5_pins>; }; + +&cpu0 { + cpu0-supply = <&smps123_reg>; +}; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 7cdea1bfea0..fc3fad56386 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -21,6 +21,11 @@ interrupt-parent = <&gic>; aliases { + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; + i2c3 = &i2c4; + i2c4 = &i2c5; serial0 = &uart1; serial1 = &uart2; serial2 = &uart3; @@ -33,10 +38,17 @@ #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x0>; + + operating-points = < + /* kHz uV */ + 500000 880000 + 1000000 1060000 + 1500000 1250000 + >; }; cpu@1 { device_type = "cpu"; @@ -52,7 +64,6 @@ <GIC_PPI 14 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 11 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 10 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>; - clock-frequency = <6144000>; }; gic: interrupt-controller@48211000 { @@ -276,6 +287,12 @@ ti,hwmods = "i2c5"; }; + hwspinlock: spinlock@4a0f6000 { + compatible = "ti,omap4-hwspinlock"; + reg = <0x4a0f6000 0x1000>; + ti,hwmods = "spinlock"; + }; + mcspi1: spi@48098000 { compatible = "ti,omap4-mcspi"; reg = <0x48098000 0x200>; @@ -604,9 +621,10 @@ ti,hwmods = "wd_timer2"; }; - emif1: emif@0x4c000000 { + emif1: emif@4c000000 { compatible = "ti,emif-4d5"; ti,hwmods = "emif1"; + ti,no-idle-on-init; phy-type = <2>; /* DDR PHY type: Intelli PHY */ reg = <0x4c000000 0x400>; interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; @@ -615,9 +633,10 @@ hw-caps-temp-alert; }; - emif2: emif@0x4d000000 { + emif2: emif@4d000000 { compatible = "ti,emif-4d5"; ti,hwmods = "emif2"; + ti,no-idle-on-init; phy-type = <2>; /* DDR PHY type: Intelli PHY */ reg = <0x4d000000 0x400>; interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; @@ -626,15 +645,19 @@ hw-caps-temp-alert; }; - omap_control_usb: omap-control-usb@4a002300 { - compatible = "ti,omap-control-usb"; - reg = <0x4a002300 0x4>, - <0x4a002370 0x4>; - reg-names = "control_dev_conf", "phy_power_usb"; - ti,type = <2>; + omap_control_usb2phy: control-phy@4a002300 { + compatible = "ti,control-phy-usb2"; + reg = <0x4a002300 0x4>; + reg-names = "power"; + }; + + omap_control_usb3phy: control-phy@4a002370 { + compatible = "ti,control-phy-pipe3"; + reg = <0x4a002370 0x4>; + reg-names = "power"; }; - omap_dwc3@4a020000 { + usb3: omap_dwc3@4a020000 { compatible = "ti,dwc3"; ti,hwmods = "usb_otg_ss"; reg = <0x4a020000 0x10000>; @@ -648,6 +671,7 @@ reg = <0x4a030000 0x10000>; interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; usb-phy = <&usb2_phy>, <&usb3_phy>; + dr_mode = "peripheral"; tx-fifo-resize; }; }; @@ -662,7 +686,7 @@ usb2_phy: usb2phy@4a084000 { compatible = "ti,omap-usb2"; reg = <0x4a084000 0x7c>; - ctrl-module = <&omap_control_usb>; + ctrl-module = <&omap_control_usb2phy>; }; usb3_phy: usb3phy@4a084400 { @@ -671,7 +695,7 @@ <0x4a084800 0x64>, <0x4a084c00 0x40>; reg-names = "phy_rx", "phy_tx", "pll_ctrl"; - ctrl-module = <&omap_control_usb>; + ctrl-module = <&omap_control_usb3phy>; }; }; diff --git a/arch/arm/boot/dts/prima2.dtsi b/arch/arm/boot/dts/prima2.dtsi index 27ed9f5144b..7cf78afee7b 100644 --- a/arch/arm/boot/dts/prima2.dtsi +++ b/arch/arm/boot/dts/prima2.dtsi @@ -76,6 +76,11 @@ compatible = "sirf,prima2-rsc"; reg = <0x88020000 0x1000>; }; + + cphifbg@88030000 { + compatible = "sirf,prima2-cphifbg"; + reg = <0x88030000 0x1000>; + }; }; mem-iobg { @@ -86,10 +91,17 @@ memory-controller@90000000 { compatible = "sirf,prima2-memc"; - reg = <0x90000000 0x10000>; + reg = <0x90000000 0x2000>; interrupts = <27>; clocks = <&clks 5>; }; + + memc-monitor { + compatible = "sirf,prima2-memcmon"; + reg = <0x90002000 0x200>; + interrupts = <4>; + clocks = <&clks 32>; + }; }; disp-iobg { @@ -287,7 +299,13 @@ compatible = "sirf,prima2-spi"; reg = <0xb00d0000 0x10000>; interrupts = <15>; + sirf,spi-num-chipselects = <1>; + sirf,spi-dma-rx-channel = <25>; + sirf,spi-dma-tx-channel = <20>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&clks 19>; + status = "disabled"; }; spi1: spi@b0170000 { @@ -295,7 +313,13 @@ compatible = "sirf,prima2-spi"; reg = <0xb0170000 0x10000>; interrupts = <16>; + sirf,spi-num-chipselects = <1>; + sirf,spi-dma-rx-channel = <12>; + sirf,spi-dma-tx-channel = <13>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&clks 20>; + status = "disabled"; }; i2c0: i2c@b00e0000 { @@ -304,6 +328,8 @@ reg = <0xb00e0000 0x10000>; interrupts = <24>; clocks = <&clks 17>; + #address-cells = <1>; + #size-cells = <0>; }; i2c1: i2c@b00f0000 { @@ -312,6 +338,8 @@ reg = <0xb00f0000 0x10000>; interrupts = <25>; clocks = <&clks 18>; + #address-cells = <1>; + #size-cells = <0>; }; tsc@b0110000 { diff --git a/arch/arm/boot/dts/msm8660-surf.dts b/arch/arm/boot/dts/qcom-msm8660-surf.dts index 386d4287021..386d4287021 100644 --- a/arch/arm/boot/dts/msm8660-surf.dts +++ b/arch/arm/boot/dts/qcom-msm8660-surf.dts diff --git a/arch/arm/boot/dts/msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts index 93e9f7e0b7a..93e9f7e0b7a 100644 --- a/arch/arm/boot/dts/msm8960-cdp.dts +++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts diff --git a/arch/arm/boot/dts/r7s72100-genmai.dts b/arch/arm/boot/dts/r7s72100-genmai.dts new file mode 100644 index 00000000000..1fb20f2333c --- /dev/null +++ b/arch/arm/boot/dts/r7s72100-genmai.dts @@ -0,0 +1,31 @@ +/* + * Device Tree Source for the Genmai board + * + * Copyright (C) 2013 Renesas Solutions Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +/include/ "r7s72100.dtsi" + +/ { + model = "Genmai"; + compatible = "renesas,genmai", "renesas,r7s72100"; + + chosen { + bootargs = "console=ttySC2,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp"; + }; + + memory { + device_type = "memory"; + reg = <0x08000000 0x08000000>; + }; + + lbsc { + #address-cells = <1>; + #size-cells = <1>; + }; +}; diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi new file mode 100644 index 00000000000..46b82aa7dc4 --- /dev/null +++ b/arch/arm/boot/dts/r7s72100.dtsi @@ -0,0 +1,36 @@ +/* + * Device Tree Source for the r7s72100 SoC + * + * Copyright (C) 2013 Renesas Solutions Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/ { + compatible = "renesas,r7s72100"; + interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + }; + }; + + gic: interrupt-controller@e8201000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0xe8201000 0x1000>, + <0xe8202000 0x1000>; + }; +}; diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts b/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts index f444624eb09..9443e93d3ca 100644 --- a/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts +++ b/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts @@ -10,6 +10,7 @@ /dts-v1/; /include/ "r8a73a4.dtsi" +#include <dt-bindings/gpio/gpio.h> / { model = "APE6EVM"; @@ -24,6 +25,34 @@ reg = <0 0x40000000 0 0x40000000>; }; + vcc_mmc0: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "MMC0 Vcc"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + vcc_sdhi0: regulator@1 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI0 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pfc 76 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + /* Common 3.3V rail, used by several devices on APE6EVM */ + ape6evm_fixed_3v3: regulator@2 { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + lbsc { compatible = "simple-bus"; #address-cells = <1>; @@ -33,6 +62,7 @@ }; &i2c5 { + status = "okay"; vdd_dvfs: max8973@1b { compatible = "maxim,max8973"; reg = <0x1b>; @@ -62,4 +92,47 @@ renesas,groups = "scifa0_data"; renesas,function = "scifa0"; }; + + mmc0_pins: mmcif { + renesas,groups = "mmc0_data8", "mmc0_ctrl"; + renesas,function = "mmc0"; + }; + + sdhi0_pins: sdhi0 { + renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd"; + renesas,function = "sdhi0"; + }; + + sdhi1_pins: sdhi1 { + renesas,groups = "sdhi1_data4", "sdhi1_ctrl"; + renesas,function = "sdhi1"; + }; +}; + +&mmcif0 { + vmmc-supply = <&vcc_mmc0>; + bus-width = <8>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + status = "okay"; +}; + +&sdhi0 { + vmmc-supply = <&vcc_sdhi0>; + bus-width = <4>; + toshiba,mmc-wrprotect-disable; + pinctrl-names = "default"; + pinctrl-0 = <&sdhi0_pins>; + status = "okay"; +}; + +&sdhi1 { + vmmc-supply = <&ape6evm_fixed_3v3>; + bus-width = <4>; + broken-cd; + toshiba,mmc-wrprotect-disable; + pinctrl-names = "default"; + pinctrl-0 = <&sdhi1_pins>; + status = "okay"; }; diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/r8a73a4-ape6evm.dts index 72f867e6579..91436b58016 100644 --- a/arch/arm/boot/dts/r8a73a4-ape6evm.dts +++ b/arch/arm/boot/dts/r8a73a4-ape6evm.dts @@ -52,6 +52,7 @@ }; &i2c5 { + status = "okay"; vdd_dvfs: max8973@1b { compatible = "maxim,max8973"; reg = <0x1b>; diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi index 658fcc53757..287e047592a 100644 --- a/arch/arm/boot/dts/r8a73a4.dtsi +++ b/arch/arm/boot/dts/r8a73a4.dtsi @@ -78,6 +78,49 @@ <0 56 4>, <0 57 4>; }; + dmac: dma-multiplexer@0 { + compatible = "renesas,shdma-mux"; + #dma-cells = <1>; + dma-channels = <20>; + dma-requests = <256>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + dma0: dma-controller@e6700020 { + compatible = "renesas,shdma-r8a73a4"; + reg = <0 0xe6700020 0 0x89e0>; + interrupt-parent = <&gic>; + interrupts = <0 220 4 + 0 200 4 + 0 201 4 + 0 202 4 + 0 203 4 + 0 204 4 + 0 205 4 + 0 206 4 + 0 207 4 + 0 208 4 + 0 209 4 + 0 210 4 + 0 211 4 + 0 212 4 + 0 213 4 + 0 214 4 + 0 215 4 + 0 216 4 + 0 217 4 + 0 218 4 + 0 219 4>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15", + "ch16", "ch17", "ch18", "ch19"; + }; + }; + thermal@e61f0000 { compatible = "renesas,rcar-thermal"; reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>, @@ -93,6 +136,7 @@ reg = <0 0xe6500000 0 0x428>; interrupt-parent = <&gic>; interrupts = <0 174 0x4>; + status = "disabled"; }; i2c1: i2c@e6510000 { @@ -102,6 +146,7 @@ reg = <0 0xe6510000 0 0x428>; interrupt-parent = <&gic>; interrupts = <0 175 0x4>; + status = "disabled"; }; i2c2: i2c@e6520000 { @@ -111,6 +156,7 @@ reg = <0 0xe6520000 0 0x428>; interrupt-parent = <&gic>; interrupts = <0 176 0x4>; + status = "disabled"; }; i2c3: i2c@e6530000 { @@ -120,6 +166,7 @@ reg = <0 0xe6530000 0 0x428>; interrupt-parent = <&gic>; interrupts = <0 177 0x4>; + status = "disabled"; }; i2c4: i2c@e6540000 { @@ -129,6 +176,7 @@ reg = <0 0xe6540000 0 0x428>; interrupt-parent = <&gic>; interrupts = <0 178 0x4>; + status = "disabled"; }; i2c5: i2c@e60b0000 { @@ -138,6 +186,7 @@ reg = <0 0xe60b0000 0 0x428>; interrupt-parent = <&gic>; interrupts = <0 179 0x4>; + status = "disabled"; }; i2c6: i2c@e6550000 { @@ -147,6 +196,7 @@ reg = <0 0xe6550000 0 0x428>; interrupt-parent = <&gic>; interrupts = <0 184 0x4>; + status = "disabled"; }; i2c7: i2c@e6560000 { @@ -156,6 +206,7 @@ reg = <0 0xe6560000 0 0x428>; interrupt-parent = <&gic>; interrupts = <0 185 0x4>; + status = "disabled"; }; i2c8: i2c@e6570000 { @@ -165,6 +216,7 @@ reg = <0 0xe6570000 0 0x428>; interrupt-parent = <&gic>; interrupts = <0 173 0x4>; + status = "disabled"; }; mmcif0: mmcif@ee200000 { diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts index c638e4ab91b..1c56c5e5695 100644 --- a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts +++ b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts @@ -11,6 +11,7 @@ /dts-v1/; /include/ "r8a7740.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pwm/pwm.h> / { model = "armadillo 800 eva reference"; @@ -34,6 +35,33 @@ regulator-boot-on; }; + vcc_sdhi0: regulator@1 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI0 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pfc 75 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vccq_sdhi0: regulator@2 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI0 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_sdhi0>; + + enable-gpio = <&pfc 74 GPIO_ACTIVE_HIGH>; + gpios = <&pfc 17 GPIO_ACTIVE_HIGH>; + states = <3300000 0 + 1800000 1>; + + enable-active-high; + }; + leds { compatible = "gpio-leds"; led1 { @@ -49,9 +77,19 @@ gpios = <&pfc 177 GPIO_ACTIVE_HIGH>; }; }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&tpu 2 33333 PWM_POLARITY_INVERTED>; + brightness-levels = <0 1 2 4 8 16 32 64 128 255>; + default-brightness-level = <9>; + pinctrl-0 = <&backlight_pins>; + pinctrl-names = "default"; + }; }; &i2c0 { + status = "okay"; touchscreen: st1232@55 { compatible = "sitronix,st1232"; reg = <0x55>; @@ -76,4 +114,44 @@ renesas,groups = "intc_irq10"; renesas,function = "intc"; }; + + backlight_pins: backlight { + renesas,groups = "tpu0_to2_1"; + renesas,function = "tpu0"; + }; + + mmc0_pins: mmc0 { + renesas,groups = "mmc0_data8_1", "mmc0_ctrl_1"; + renesas,function = "mmc0"; + }; + + sdhi0_pins: sdhi0 { + renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_wp"; + renesas,function = "sdhi0"; + }; +}; + +&tpu { + status = "okay"; +}; + +&mmcif0 { + pinctrl-0 = <&mmc0_pins>; + pinctrl-names = "default"; + + vmmc-supply = <®_3p3v>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&vcc_sdhi0>; + vqmmc-supply = <&vccq_sdhi0>; + bus-width = <4>; + cd-gpios = <&pfc 167 GPIO_ACTIVE_LOW>; + status = "okay"; }; diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi index 44d3d520e01..ae1e230f711 100644 --- a/arch/arm/boot/dts/r8a7740.dtsi +++ b/arch/arm/boot/dts/r8a7740.dtsi @@ -131,6 +131,7 @@ 0 202 0x4 0 203 0x4 0 204 0x4>; + status = "disabled"; }; i2c1: i2c@e6c20000 { @@ -143,6 +144,7 @@ 0 71 0x4 0 72 0x4 0 73 0x4>; + status = "disabled"; }; pfc: pfc@e6050000 { @@ -159,4 +161,37 @@ status = "disabled"; #pwm-cells = <3>; }; + + mmcif0: mmcif@e6bd0000 { + compatible = "renesas,sh-mmcif"; + reg = <0xe6bd0000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 56 4 + 0 57 4>; + status = "disabled"; + }; + + sdhi0: sdhi@e6850000 { + compatible = "renesas,sdhi-r8a7740"; + reg = <0xe6850000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 117 4 + 0 118 4 + 0 119 4>; + cap-sd-highspeed; + cap-sdio-irq; + status = "disabled"; + }; + + sdhi1: sdhi@e6860000 { + compatible = "renesas,sdhi-r8a7740"; + reg = <0xe6860000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 121 4 + 0 122 4 + 0 123 4>; + cap-sd-highspeed; + cap-sdio-irq; + status = "disabled"; + }; }; diff --git a/arch/arm/boot/dts/r8a7778-bockw-reference.dts b/arch/arm/boot/dts/r8a7778-bockw-reference.dts index 9bb903a3230..969e386e852 100644 --- a/arch/arm/boot/dts/r8a7778-bockw-reference.dts +++ b/arch/arm/boot/dts/r8a7778-bockw-reference.dts @@ -22,11 +22,36 @@ compatible = "renesas,bockw-reference", "renesas,r8a7778"; chosen { - bootargs = "console=ttySC0,115200 ignore_loglevel rw"; + bootargs = "console=ttySC0,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw"; }; memory { device_type = "memory"; reg = <0x60000000 0x10000000>; }; + + fixedregulator3v3: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ethernet@18300000 { + compatible = "smsc,lan9220", "smsc,lan9115"; + reg = <0x18300000 0x1000>; + + phy-mode = "mii"; + interrupt-parent = <&irqpin>; + interrupts = <0 0>; /* IRQ0: hwirq 0 on irqpin */ + reg-io-width = <4>; + vddvario-supply = <&fixedregulator3v3>; + vdd33a-supply = <&fixedregulator3v3>; + }; +}; + +&irqpin { + status = "okay"; }; diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi index 3577aba8258..a6308a399e2 100644 --- a/arch/arm/boot/dts/r8a7778.dtsi +++ b/arch/arm/boot/dts/r8a7778.dtsi @@ -33,6 +33,25 @@ <0xfe430000 0x100>; }; + /* irqpin: IRQ0 - IRQ3 */ + irqpin: irqpin@fe78001c { + compatible = "renesas,intc-irqpin"; + #interrupt-cells = <2>; + interrupt-controller; + status = "disabled"; /* default off */ + reg = <0xfe78001c 4>, + <0xfe780010 4>, + <0xfe780024 4>, + <0xfe780044 4>, + <0xfe780064 4>; + interrupt-parent = <&gic>; + interrupts = <0 27 0x4 + 0 28 0x4 + 0 29 0x4 + 0 30 0x4>; + sense-bitfield-width = <2>; + }; + gpio0: gpio@ffc40000 { compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; reg = <0xffc40000 0x2c>; diff --git a/arch/arm/boot/dts/r8a7779-marzen-reference.dts b/arch/arm/boot/dts/r8a7779-marzen-reference.dts index 6d550839225..ab4110aa3c3 100644 --- a/arch/arm/boot/dts/r8a7779-marzen-reference.dts +++ b/arch/arm/boot/dts/r8a7779-marzen-reference.dts @@ -42,8 +42,8 @@ pinctrl-names = "default"; phy-mode = "mii"; - interrupt-parent = <&gic>; - interrupts = <0 28 0x4>; + interrupt-parent = <&irqpin0>; + interrupts = <1 0>; /* IRQ1: hwirq 1 on irqpin0 */ reg-io-width = <4>; vddvario-supply = <&fixedregulator3v3>; vdd33a-supply = <&fixedregulator3v3>; @@ -63,6 +63,10 @@ }; }; +&irqpin0 { + status = "okay"; +}; + &pfc { pinctrl-0 = <&scif2_pins &scif4_pins &sdhi0_pins>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi index ebbe507fcbf..19faeac3fd2 100644 --- a/arch/arm/boot/dts/r8a7779.dtsi +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -135,6 +135,7 @@ irqpin0: irqpin@fe780010 { compatible = "renesas,intc-irqpin"; #interrupt-cells = <2>; + status = "disabled"; interrupt-controller; reg = <0xfe78001c 4>, <0xfe780010 4>, @@ -156,6 +157,7 @@ reg = <0xffc70000 0x1000>; interrupt-parent = <&gic>; interrupts = <0 79 0x4>; + status = "disabled"; }; i2c1: i2c@ffc71000 { @@ -165,6 +167,7 @@ reg = <0xffc71000 0x1000>; interrupt-parent = <&gic>; interrupts = <0 82 0x4>; + status = "disabled"; }; i2c2: i2c@ffc72000 { @@ -174,6 +177,7 @@ reg = <0xffc72000 0x1000>; interrupt-parent = <&gic>; interrupts = <0 80 0x4>; + status = "disabled"; }; i2c3: i2c@ffc73000 { @@ -183,6 +187,7 @@ reg = <0xffc73000 0x1000>; interrupt-parent = <&gic>; interrupts = <0 81 0x4>; + status = "disabled"; }; pfc: pfc@fffc0000 { diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 413b4c29e78..ee845fad939 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -24,6 +24,55 @@ reg = <0>; clock-frequency = <1300000000>; }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <1>; + clock-frequency = <1300000000>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <2>; + clock-frequency = <1300000000>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <3>; + clock-frequency = <1300000000>; + }; + + cpu4: cpu@4 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x100>; + clock-frequency = <780000000>; + }; + + cpu5: cpu@5 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x101>; + clock-frequency = <780000000>; + }; + + cpu6: cpu@6 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x102>; + clock-frequency = <780000000>; + }; + + cpu7: cpu@7 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x103>; + clock-frequency = <780000000>; + }; }; gic: interrupt-controller@f1001000 { @@ -127,6 +176,46 @@ interrupts = <0 0 4>, <0 1 4>, <0 2 4>, <0 3 4>; }; + i2c0: i2c@e6508000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7790"; + reg = <0 0xe6508000 0 0x40>; + interrupt-parent = <&gic>; + interrupts = <0 287 0x4>; + status = "disabled"; + }; + + i2c1: i2c@e6518000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7790"; + reg = <0 0xe6518000 0 0x40>; + interrupt-parent = <&gic>; + interrupts = <0 288 0x4>; + status = "disabled"; + }; + + i2c2: i2c@e6530000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7790"; + reg = <0 0xe6530000 0 0x40>; + interrupt-parent = <&gic>; + interrupts = <0 286 0x4>; + status = "disabled"; + }; + + i2c3: i2c@e6540000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7790"; + reg = <0 0xe6540000 0 0x40>; + interrupt-parent = <&gic>; + interrupts = <0 290 0x4>; + status = "disabled"; + }; + mmcif0: mmcif@ee200000 { compatible = "renesas,sh-mmcif"; reg = <0 0xee200000 0 0x80>; diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts new file mode 100644 index 00000000000..1ce5250ec27 --- /dev/null +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -0,0 +1,32 @@ +/* + * Device Tree Source for the Koelsch board + * + * Copyright (C) 2013 Renesas Electronics Corporation + * Copyright (C) 2013 Renesas Solutions Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +/include/ "r8a7791.dtsi" + +/ { + model = "Koelsch"; + compatible = "renesas,koelsch", "renesas,r8a7791"; + + chosen { + bootargs = "console=ttySC6,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp"; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x80000000>; + }; + + lbsc { + #address-cells = <1>; + #size-cells = <1>; + }; +}; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi new file mode 100644 index 00000000000..fea5cfef469 --- /dev/null +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -0,0 +1,74 @@ +/* + * Device Tree Source for the r8a7791 SoC + * + * Copyright (C) 2013 Renesas Electronics Corporation + * Copyright (C) 2013 Renesas Solutions Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/ { + compatible = "renesas,r8a7791"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + clock-frequency = <1300000000>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <1>; + clock-frequency = <1300000000>; + }; + }; + + gic: interrupt-controller@f1001000 { + compatible = "arm,cortex-a15-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0 0xf1001000 0 0x1000>, + <0 0xf1002000 0 0x1000>, + <0 0xf1004000 0 0x2000>, + <0 0xf1006000 0 0x2000>; + interrupts = <1 9 0xf04>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <1 13 0xf08>, + <1 14 0xf08>, + <1 11 0xf08>, + <1 10 0xf08>; + }; + + irqc0: interrupt-controller@e61c0000 { + compatible = "renesas,irqc"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0 0xe61c0000 0 0x200>; + interrupt-parent = <&gic>; + interrupts = <0 0 4>, + <0 1 4>, + <0 2 4>, + <0 3 4>, + <0 12 4>, + <0 13 4>, + <0 14 4>, + <0 15 4>, + <0 16 4>, + <0 17 4>; + }; +}; diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts new file mode 100644 index 00000000000..035df4053c2 --- /dev/null +++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts @@ -0,0 +1,109 @@ +/* + * Copyright (c) 2013 MundoReader S.L. + * Author: Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/dts-v1/; +#include "rk3066a.dtsi" + +/ { + model = "bq Curie 2"; + + memory { + reg = <0x60000000 0x40000000>; + }; + + soc { + uart0: serial@10124000 { + status = "okay"; + }; + + uart1: serial@10126000 { + status = "okay"; + }; + + uart2: serial@20064000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_xfer>; + status = "okay"; + }; + + uart3: serial@20068000 { + status = "okay"; + }; + + vcc_sd0: fixed-regulator { + compatible = "regulator-fixed"; + regulator-name = "sdmmc-supply"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + gpio = <&gpio3 7 GPIO_ACTIVE_LOW>; + startup-delay-us = <100000>; + }; + + dwmmc@10214000 { /* sdmmc */ + num-slots = <1>; + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4>; + vmmc-supply = <&vcc_sd0>; + + slot@0 { + reg = <0>; + bus-width = <4>; + disable-wp; + }; + }; + + dwmmc@10218000 { /* wifi */ + num-slots = <1>; + status = "okay"; + non-removable; + + pinctrl-names = "default"; + pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4>; + + slot@0 { + reg = <0>; + bus-width = <4>; + disable-wp; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + + button@0 { + gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; /* GPIO6_A2 */ + linux,code = <116>; + label = "GPIO Key Power"; + linux,input-type = <1>; + gpio-key,wakeup = <1>; + debounce-interval = <100>; + }; + button@1 { + gpios = <&gpio4 21 GPIO_ACTIVE_LOW>; /* GPIO4_C5 */ + linux,code = <104>; + label = "GPIO Key Vol-"; + linux,input-type = <1>; + gpio-key,wakeup = <0>; + debounce-interval = <100>; + }; + /* VOL+ comes somehow thru the ADC */ + }; + }; +}; diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi index 56bfac93d3f..be5d2b09a36 100644 --- a/arch/arm/boot/dts/rk3066a.dtsi +++ b/arch/arm/boot/dts/rk3066a.dtsi @@ -14,15 +14,12 @@ */ #include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/pinctrl/rockchip.h> -#include "skeleton.dtsi" +#include "rk3xxx.dtsi" #include "rk3066a-clocks.dtsi" / { compatible = "rockchip,rk3066a"; - interrupt-parent = <&gic>; cpus { #address-cells = <1>; @@ -43,33 +40,6 @@ }; soc { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges; - - gic: interrupt-controller@1013d000 { - compatible = "arm,cortex-a9-gic"; - interrupt-controller; - #interrupt-cells = <3>; - reg = <0x1013d000 0x1000>, - <0x1013c100 0x0100>; - }; - - L2: l2-cache-controller@10138000 { - compatible = "arm,pl310-cache"; - reg = <0x10138000 0x1000>; - cache-unified; - cache-level = <2>; - }; - - local-timer@1013c600 { - compatible = "arm,cortex-a9-twd-timer"; - reg = <0x1013c600 0x20>; - interrupts = <GIC_PPI 13 0x304>; - clocks = <&dummy150m>; - }; - timer@20038000 { compatible = "snps,dw-apb-timer-osc"; reg = <0x20038000 0x100>; @@ -191,17 +161,14 @@ uart0_xfer: uart0-xfer { rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_default>, <RK_GPIO1 1 RK_FUNC_1 &pcfg_pull_default>; - rockchip,config = <&pcfg_pull_default>; }; uart0_cts: uart0-cts { rockchip,pins = <RK_GPIO1 2 RK_FUNC_1 &pcfg_pull_default>; - rockchip,config = <&pcfg_pull_default>; }; uart0_rts: uart0-rts { rockchip,pins = <RK_GPIO1 3 RK_FUNC_1 &pcfg_pull_default>; - rockchip,config = <&pcfg_pull_default>; }; }; @@ -209,17 +176,14 @@ uart1_xfer: uart1-xfer { rockchip,pins = <RK_GPIO1 4 RK_FUNC_1 &pcfg_pull_default>, <RK_GPIO1 5 RK_FUNC_1 &pcfg_pull_default>; - rockchip,config = <&pcfg_pull_default>; }; uart1_cts: uart1-cts { rockchip,pins = <RK_GPIO1 6 RK_FUNC_1 &pcfg_pull_default>; - rockchip,config = <&pcfg_pull_default>; }; uart1_rts: uart1-rts { rockchip,pins = <RK_GPIO1 7 RK_FUNC_1 &pcfg_pull_default>; - rockchip,config = <&pcfg_pull_default>; }; }; @@ -227,7 +191,6 @@ uart2_xfer: uart2-xfer { rockchip,pins = <RK_GPIO1 8 RK_FUNC_1 &pcfg_pull_default>, <RK_GPIO1 9 RK_FUNC_1 &pcfg_pull_default>; - rockchip,config = <&pcfg_pull_default>; }; /* no rts / cts for uart2 */ }; @@ -236,44 +199,36 @@ uart3_xfer: uart3-xfer { rockchip,pins = <RK_GPIO3 27 RK_FUNC_1 &pcfg_pull_default>, <RK_GPIO3 28 RK_FUNC_1 &pcfg_pull_default>; - rockchip,config = <&pcfg_pull_default>; }; uart3_cts: uart3-cts { rockchip,pins = <RK_GPIO3 29 RK_FUNC_1 &pcfg_pull_default>; - rockchip,config = <&pcfg_pull_default>; }; uart3_rts: uart3-rts { rockchip,pins = <RK_GPIO3 30 RK_FUNC_1 &pcfg_pull_default>; - rockchip,config = <&pcfg_pull_default>; }; }; sd0 { sd0_clk: sd0-clk { rockchip,pins = <RK_GPIO3 8 RK_FUNC_1 &pcfg_pull_default>; - rockchip,config = <&pcfg_pull_default>; }; sd0_cmd: sd0-cmd { rockchip,pins = <RK_GPIO3 9 RK_FUNC_1 &pcfg_pull_default>; - rockchip,config = <&pcfg_pull_default>; }; sd0_cd: sd0-cd { rockchip,pins = <RK_GPIO3 14 RK_FUNC_1 &pcfg_pull_default>; - rockchip,config = <&pcfg_pull_default>; }; sd0_wp: sd0-wp { rockchip,pins = <RK_GPIO3 15 RK_FUNC_1 &pcfg_pull_default>; - rockchip,config = <&pcfg_pull_default>; }; sd0_bus1: sd0-bus-width1 { rockchip,pins = <RK_GPIO3 10 RK_FUNC_1 &pcfg_pull_default>; - rockchip,config = <&pcfg_pull_default>; }; sd0_bus4: sd0-bus-width4 { @@ -281,34 +236,28 @@ <RK_GPIO3 11 RK_FUNC_1 &pcfg_pull_default>, <RK_GPIO3 12 RK_FUNC_1 &pcfg_pull_default>, <RK_GPIO3 13 RK_FUNC_1 &pcfg_pull_default>; - rockchip,config = <&pcfg_pull_default>; }; }; sd1 { sd1_clk: sd1-clk { rockchip,pins = <RK_GPIO3 21 RK_FUNC_1 &pcfg_pull_default>; - rockchip,config = <&pcfg_pull_default>; }; sd1_cmd: sd1-cmd { rockchip,pins = <RK_GPIO3 16 RK_FUNC_1 &pcfg_pull_default>; - rockchip,config = <&pcfg_pull_default>; }; sd1_cd: sd1-cd { rockchip,pins = <RK_GPIO3 22 RK_FUNC_1 &pcfg_pull_default>; - rockchip,config = <&pcfg_pull_default>; }; sd1_wp: sd1-wp { rockchip,pins = <RK_GPIO3 23 RK_FUNC_1 &pcfg_pull_default>; - rockchip,config = <&pcfg_pull_default>; }; sd1_bus1: sd1-bus-width1 { rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_default>; - rockchip,config = <&pcfg_pull_default>; }; sd1_bus4: sd1-bus-width4 { @@ -316,75 +265,8 @@ <RK_GPIO3 18 RK_FUNC_1 &pcfg_pull_default>, <RK_GPIO3 19 RK_FUNC_1 &pcfg_pull_default>, <RK_GPIO3 20 RK_FUNC_1 &pcfg_pull_default>; - rockchip,config = <&pcfg_pull_default>; }; }; }; - - uart0: serial@10124000 { - compatible = "snps,dw-apb-uart"; - reg = <0x10124000 0x400>; - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <1>; - clocks = <&clk_gates1 8>; - status = "disabled"; - }; - - uart1: serial@10126000 { - compatible = "snps,dw-apb-uart"; - reg = <0x10126000 0x400>; - interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <1>; - clocks = <&clk_gates1 10>; - status = "disabled"; - }; - - uart2: serial@20064000 { - compatible = "snps,dw-apb-uart"; - reg = <0x20064000 0x400>; - interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <1>; - clocks = <&clk_gates1 12>; - status = "disabled"; - }; - - uart3: serial@20068000 { - compatible = "snps,dw-apb-uart"; - reg = <0x20068000 0x400>; - interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <1>; - clocks = <&clk_gates1 14>; - status = "disabled"; - }; - - dwmmc@10214000 { - compatible = "rockchip,rk2928-dw-mshc"; - reg = <0x10214000 0x1000>; - interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - - clocks = <&clk_gates5 10>, <&clk_gates2 11>; - clock-names = "biu", "ciu"; - - status = "disabled"; - }; - - dwmmc@10218000 { - compatible = "rockchip,rk2928-dw-mshc"; - reg = <0x10218000 0x1000>; - interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - - clocks = <&clk_gates5 11>, <&clk_gates2 13>; - clock-names = "biu", "ciu"; - - status = "disabled"; - }; }; }; diff --git a/arch/arm/boot/dts/rk3188-clocks.dtsi b/arch/arm/boot/dts/rk3188-clocks.dtsi new file mode 100644 index 00000000000..b1b92dc245c --- /dev/null +++ b/arch/arm/boot/dts/rk3188-clocks.dtsi @@ -0,0 +1,289 @@ +/* + * Copyright (c) 2013 MundoReader S.L. + * Author: Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/ { + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* + * This is a dummy clock, to be used as placeholder on + * other mux clocks when a specific parent clock is not + * yet implemented. It should be dropped when the driver + * is complete. + */ + dummy: dummy { + compatible = "fixed-clock"; + clock-frequency = <0>; + #clock-cells = <0>; + }; + + xin24m: xin24m { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + #clock-cells = <0>; + }; + + dummy48m: dummy48m { + compatible = "fixed-clock"; + clock-frequency = <48000000>; + #clock-cells = <0>; + }; + + dummy150m: dummy150m { + compatible = "fixed-clock"; + clock-frequency = <150000000>; + #clock-cells = <0>; + }; + + clk_gates0: gate-clk@200000d0 { + compatible = "rockchip,rk2928-gate-clk"; + reg = <0x200000d0 0x4>; + clocks = <&dummy150m>, <&dummy>, + <&dummy>, <&dummy>, + <&dummy>, <&dummy>, + <&dummy>, <&dummy>, + <&dummy>, <&dummy>, + <&dummy>, <&dummy>, + <&dummy>, <&dummy>, + <&dummy>, <&dummy>; + + clock-output-names = + "gate_core_periph", "gate_cpu_gpll", + "gate_ddrphy", "gate_aclk_cpu", + "gate_hclk_cpu", "gate_pclk_cpu", + "gate_atclk_cpu", "gate_aclk_core", + "reserved", "gate_i2s0", + "gate_i2s0_frac", "reserved", + "reserved", "gate_spdif", + "gate_spdif_frac", "gate_testclk"; + + #clock-cells = <1>; + }; + + clk_gates1: gate-clk@200000d4 { + compatible = "rockchip,rk2928-gate-clk"; + reg = <0x200000d4 0x4>; + clocks = <&xin24m>, <&xin24m>, + <&xin24m>, <&dummy>, + <&dummy>, <&xin24m>, + <&xin24m>, <&dummy>, + <&xin24m>, <&dummy>, + <&xin24m>, <&dummy>, + <&xin24m>, <&dummy>, + <&xin24m>, <&dummy>; + + clock-output-names = + "gate_timer0", "gate_timer1", + "gate_timer3", "gate_jtag", + "gate_aclk_lcdc1_src", "gate_otgphy0", + "gate_otgphy1", "gate_ddr_gpll", + "gate_uart0", "gate_frac_uart0", + "gate_uart1", "gate_frac_uart1", + "gate_uart2", "gate_frac_uart2", + "gate_uart3", "gate_frac_uart3"; + + #clock-cells = <1>; + }; + + clk_gates2: gate-clk@200000d8 { + compatible = "rockchip,rk2928-gate-clk"; + reg = <0x200000d8 0x4>; + clocks = <&clk_gates2 1>, <&dummy>, + <&dummy>, <&dummy>, + <&dummy>, <&dummy>, + <&clk_gates2 3>, <&dummy>, + <&dummy>, <&dummy>, + <&dummy>, <&dummy48m>, + <&dummy>, <&dummy48m>, + <&dummy>, <&dummy>; + + clock-output-names = + "gate_periph_src", "gate_aclk_periph", + "gate_hclk_periph", "gate_pclk_periph", + "gate_smc", "gate_mac", + "gate_hsadc", "gate_hsadc_frac", + "gate_saradc", "gate_spi0", + "gate_spi1", "gate_mmc0", + "gate_mac_lbtest", "gate_mmc1", + "gate_emmc", "reserved"; + + #clock-cells = <1>; + }; + + clk_gates3: gate-clk@200000dc { + compatible = "rockchip,rk2928-gate-clk"; + reg = <0x200000dc 0x4>; + clocks = <&dummy>, <&dummy>, + <&dummy>, <&dummy>, + <&xin24m>, <&xin24m>, + <&dummy>, <&dummy>, + <&xin24m>, <&dummy>, + <&dummy>, <&dummy>, + <&dummy>, <&dummy>, + <&xin24m>, <&dummy>; + + clock-output-names = + "gate_aclk_lcdc0_src", "gate_dclk_lcdc0", + "gate_dclk_lcdc1", "gate_pclkin_cif0", + "gate_timer2", "gate_timer4", + "gate_hsicphy", "gate_cif0_out", + "gate_timer5", "gate_aclk_vepu", + "gate_hclk_vepu", "gate_aclk_vdpu", + "gate_hclk_vdpu", "reserved", + "gate_timer6", "gate_aclk_gpu_src"; + + #clock-cells = <1>; + }; + + clk_gates4: gate-clk@200000e0 { + compatible = "rockchip,rk2928-gate-clk"; + reg = <0x200000e0 0x4>; + clocks = <&clk_gates2 2>, <&clk_gates2 3>, + <&clk_gates2 1>, <&clk_gates2 1>, + <&clk_gates2 1>, <&clk_gates2 2>, + <&clk_gates2 2>, <&clk_gates2 2>, + <&clk_gates0 4>, <&clk_gates0 4>, + <&clk_gates0 3>, <&dummy>, + <&clk_gates0 3>, <&dummy>, + <&dummy>, <&dummy>; + + clock-output-names = + "gate_hclk_peri_axi_matrix", "gate_pclk_peri_axi_matrix", + "gate_aclk_cpu_peri", "gate_aclk_peri_axi_matrix", + "gate_aclk_pei_niu", "gate_hclk_usb_peri", + "gate_hclk_peri_ahb_arbi", "gate_hclk_emem_peri", + "gate_hclk_cpubus", "gate_hclk_ahb2apb", + "gate_aclk_strc_sys", "reserved", + "gate_aclk_intmem", "reserved", + "gate_hclk_imem1", "gate_hclk_imem0"; + + #clock-cells = <1>; + }; + + clk_gates5: gate-clk@200000e4 { + compatible = "rockchip,rk2928-gate-clk"; + reg = <0x200000e4 0x4>; + clocks = <&clk_gates0 3>, <&clk_gates2 1>, + <&clk_gates0 5>, <&clk_gates0 5>, + <&clk_gates0 5>, <&clk_gates0 5>, + <&clk_gates0 4>, <&clk_gates0 5>, + <&clk_gates2 1>, <&clk_gates2 2>, + <&clk_gates2 2>, <&clk_gates2 2>, + <&clk_gates2 2>, <&clk_gates4 5>; + + clock-output-names = + "gate_aclk_dmac1", "gate_aclk_dmac2", + "gate_pclk_efuse", "gate_pclk_tzpc", + "gate_pclk_grf", "gate_pclk_pmu", + "gate_hclk_rom", "gate_pclk_ddrupctl", + "gate_aclk_smc", "gate_hclk_nandc", + "gate_hclk_mmc0", "gate_hclk_mmc1", + "gate_hclk_emmc", "gate_hclk_otg0"; + + #clock-cells = <1>; + }; + + clk_gates6: gate-clk@200000e8 { + compatible = "rockchip,rk2928-gate-clk"; + reg = <0x200000e8 0x4>; + clocks = <&clk_gates3 0>, <&clk_gates0 4>, + <&clk_gates0 4>, <&clk_gates1 4>, + <&clk_gates0 4>, <&clk_gates3 0>, + <&dummy>, <&dummy>, + <&clk_gates3 0>, <&clk_gates0 4>, + <&clk_gates0 4>, <&clk_gates1 4>, + <&clk_gates0 4>, <&clk_gates3 0>; + + clock-output-names = + "gate_aclk_lcdc0", "gate_hclk_lcdc0", + "gate_hclk_lcdc1", "gate_aclk_lcdc1", + "gate_hclk_cif0", "gate_aclk_cif0", + "reserved", "reserved", + "gate_aclk_ipp", "gate_hclk_ipp", + "gate_hclk_rga", "gate_aclk_rga", + "gate_hclk_vio_bus", "gate_aclk_vio0"; + + #clock-cells = <1>; + }; + + clk_gates7: gate-clk@200000ec { + compatible = "rockchip,rk2928-gate-clk"; + reg = <0x200000ec 0x4>; + clocks = <&clk_gates2 2>, <&clk_gates0 4>, + <&clk_gates0 4>, <&dummy>, + <&dummy>, <&clk_gates2 2>, + <&clk_gates2 2>, <&clk_gates0 5>, + <&dummy>, <&clk_gates0 5>, + <&clk_gates0 5>, <&clk_gates2 3>, + <&clk_gates2 3>, <&clk_gates2 3>, + <&clk_gates2 3>, <&clk_gates2 3>; + + clock-output-names = + "gate_hclk_emac", "gate_hclk_spdif", + "gate_hclk_i2s0_2ch", "gate_hclk_otg1", + "gate_hclk_hsic", "gate_hclk_hsadc", + "gate_hclk_pidf", "gate_pclk_timer0", + "reserved", "gate_pclk_timer2", + "gate_pclk_pwm01", "gate_pclk_pwm23", + "gate_pclk_spi0", "gate_pclk_spi1", + "gate_pclk_saradc", "gate_pclk_wdt"; + + #clock-cells = <1>; + }; + + clk_gates8: gate-clk@200000f0 { + compatible = "rockchip,rk2928-gate-clk"; + reg = <0x200000f0 0x4>; + clocks = <&clk_gates0 5>, <&clk_gates0 5>, + <&clk_gates2 3>, <&clk_gates2 3>, + <&clk_gates0 5>, <&clk_gates0 5>, + <&clk_gates2 3>, <&clk_gates2 3>, + <&clk_gates2 3>, <&clk_gates0 5>, + <&clk_gates0 5>, <&clk_gates0 5>, + <&clk_gates2 3>, <&dummy>; + + clock-output-names = + "gate_pclk_uart0", "gate_pclk_uart1", + "gate_pclk_uart2", "gate_pclk_uart3", + "gate_pclk_i2c0", "gate_pclk_i2c1", + "gate_pclk_i2c2", "gate_pclk_i2c3", + "gate_pclk_i2c4", "gate_pclk_gpio0", + "gate_pclk_gpio1", "gate_pclk_gpio2", + "gate_pclk_gpio3", "gate_aclk_gps"; + + #clock-cells = <1>; + }; + + clk_gates9: gate-clk@200000f4 { + compatible = "rockchip,rk2928-gate-clk"; + reg = <0x200000f4 0x4>; + clocks = <&dummy>, <&dummy>, + <&dummy>, <&dummy>, + <&dummy>, <&dummy>, + <&dummy>, <&dummy>; + + clock-output-names = + "gate_clk_core_dbg", "gate_pclk_dbg", + "gate_clk_trace", "gate_atclk", + "gate_clk_l2c", "gate_aclk_vio1", + "gate_pclk_publ", "gate_aclk_gpu"; + + #clock-cells = <1>; + }; + }; + +}; diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts new file mode 100644 index 00000000000..3ba1968a70a --- /dev/null +++ b/arch/arm/boot/dts/rk3188-radxarock.dts @@ -0,0 +1,80 @@ +/* + * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/dts-v1/; +#include "rk3188.dtsi" + +/ { + model = "Radxa Rock"; + + memory { + reg = <0x60000000 0x80000000>; + }; + + soc { + uart0: serial@10124000 { + status = "okay"; + }; + + uart1: serial@10126000 { + status = "okay"; + }; + + uart2: serial@20064000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_xfer>; + status = "okay"; + }; + + uart3: serial@20068000 { + status = "okay"; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + + button@0 { + gpios = <&gpio0 4 GPIO_ACTIVE_LOW>; + linux,code = <116>; + label = "GPIO Key Power"; + linux,input-type = <1>; + gpio-key,wakeup = <1>; + debounce-interval = <100>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + green { + gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + yellow { + gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + sleep { + gpios = <&gpio0 15 0>; + default-state = "off"; + }; + }; + + }; +}; diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi new file mode 100644 index 00000000000..1a26b03b364 --- /dev/null +++ b/arch/arm/boot/dts/rk3188.dtsi @@ -0,0 +1,253 @@ +/* + * Copyright (c) 2013 MundoReader S.L. + * Author: Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include "rk3xxx.dtsi" +#include "rk3188-clocks.dtsi" + +/ { + compatible = "rockchip,rk3188"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + next-level-cache = <&L2>; + reg = <0x0>; + }; + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + next-level-cache = <&L2>; + reg = <0x1>; + }; + cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + next-level-cache = <&L2>; + reg = <0x2>; + }; + cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + next-level-cache = <&L2>; + reg = <0x3>; + }; + }; + + soc { + global-timer@1013c200 { + interrupts = <GIC_PPI 11 0xf04>; + }; + + local-timer@1013c600 { + interrupts = <GIC_PPI 13 0xf04>; + }; + + pinctrl@20008000 { + compatible = "rockchip,rk3188-pinctrl"; + reg = <0x20008000 0xa0>, + <0x20008164 0x1a0>; + reg-names = "base", "pull"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpio0: gpio0@0x2000a000 { + compatible = "rockchip,rk3188-gpio-bank0"; + reg = <0x2000a000 0x100>, + <0x20004064 0x8>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_gates8 9>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio1@0x2003c000 { + compatible = "rockchip,gpio-bank"; + reg = <0x2003c000 0x100>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_gates8 10>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio2@2003e000 { + compatible = "rockchip,gpio-bank"; + reg = <0x2003e000 0x100>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_gates8 11>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio3@20080000 { + compatible = "rockchip,gpio-bank"; + reg = <0x20080000 0x100>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_gates8 12>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + pcfg_pull_up: pcfg_pull_up { + bias-pull-up; + }; + + pcfg_pull_down: pcfg_pull_down { + bias-pull-down; + }; + + pcfg_pull_none: pcfg_pull_none { + bias-disable; + }; + + uart0 { + uart0_xfer: uart0-xfer { + rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_none>, + <RK_GPIO1 1 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart0_cts: uart0-cts { + rockchip,pins = <RK_GPIO1 2 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart0_rts: uart0-rts { + rockchip,pins = <RK_GPIO1 3 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + uart1 { + uart1_xfer: uart1-xfer { + rockchip,pins = <RK_GPIO1 4 RK_FUNC_1 &pcfg_pull_none>, + <RK_GPIO1 5 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart1_cts: uart1-cts { + rockchip,pins = <RK_GPIO1 6 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart1_rts: uart1-rts { + rockchip,pins = <RK_GPIO1 7 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + uart2 { + uart2_xfer: uart2-xfer { + rockchip,pins = <RK_GPIO1 8 RK_FUNC_1 &pcfg_pull_none>, + <RK_GPIO1 9 RK_FUNC_1 &pcfg_pull_none>; + }; + /* no rts / cts for uart2 */ + }; + + uart3 { + uart3_xfer: uart3-xfer { + rockchip,pins = <RK_GPIO1 10 RK_FUNC_1 &pcfg_pull_none>, + <RK_GPIO1 11 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart3_cts: uart3-cts { + rockchip,pins = <RK_GPIO1 12 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart3_rts: uart3-rts { + rockchip,pins = <RK_GPIO1 13 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + sd0 { + sd0_clk: sd0-clk { + rockchip,pins = <RK_GPIO3 2 RK_FUNC_1 &pcfg_pull_none>; + }; + + sd0_cmd: sd0-cmd { + rockchip,pins = <RK_GPIO3 3 RK_FUNC_1 &pcfg_pull_none>; + }; + + sd0_cd: sd0-cd { + rockchip,pins = <RK_GPIO3 8 RK_FUNC_1 &pcfg_pull_none>; + }; + + sd0_wp: sd0-wp { + rockchip,pins = <RK_GPIO3 9 RK_FUNC_1 &pcfg_pull_none>; + }; + + sd0_pwr: sd0-pwr { + rockchip,pins = <RK_GPIO3 1 RK_FUNC_1 &pcfg_pull_none>; + }; + + sd0_bus1: sd0-bus-width1 { + rockchip,pins = <RK_GPIO3 4 RK_FUNC_1 &pcfg_pull_none>; + }; + + sd0_bus4: sd0-bus-width4 { + rockchip,pins = <RK_GPIO3 4 RK_FUNC_1 &pcfg_pull_none>, + <RK_GPIO3 5 RK_FUNC_1 &pcfg_pull_none>, + <RK_GPIO3 6 RK_FUNC_1 &pcfg_pull_none>, + <RK_GPIO3 7 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + sd1 { + sd1_clk: sd1-clk { + rockchip,pins = <RK_GPIO3 21 RK_FUNC_1 &pcfg_pull_none>; + }; + + sd1_cmd: sd1-cmd { + rockchip,pins = <RK_GPIO3 16 RK_FUNC_1 &pcfg_pull_none>; + }; + + sd1_cd: sd1-cd { + rockchip,pins = <RK_GPIO3 22 RK_FUNC_1 &pcfg_pull_none>; + }; + + sd1_wp: sd1-wp { + rockchip,pins = <RK_GPIO3 23 RK_FUNC_1 &pcfg_pull_none>; + }; + + sd1_bus1: sd1-bus-width1 { + rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_none>; + }; + + sd1_bus4: sd1-bus-width4 { + rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_none>, + <RK_GPIO3 18 RK_FUNC_1 &pcfg_pull_none>, + <RK_GPIO3 19 RK_FUNC_1 &pcfg_pull_none>, + <RK_GPIO3 20 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi new file mode 100644 index 00000000000..0fcbcfd67de --- /dev/null +++ b/arch/arm/boot/dts/rk3xxx.dtsi @@ -0,0 +1,124 @@ +/* + * Copyright (c) 2013 MundoReader S.L. + * Author: Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include "skeleton.dtsi" + +/ { + interrupt-parent = <&gic>; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges; + + gic: interrupt-controller@1013d000 { + compatible = "arm,cortex-a9-gic"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x1013d000 0x1000>, + <0x1013c100 0x0100>; + }; + + L2: l2-cache-controller@10138000 { + compatible = "arm,pl310-cache"; + reg = <0x10138000 0x1000>; + cache-unified; + cache-level = <2>; + }; + + global-timer@1013c200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0x1013c200 0x20>; + interrupts = <GIC_PPI 11 0x304>; + clocks = <&dummy150m>; + }; + + local-timer@1013c600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x1013c600 0x20>; + interrupts = <GIC_PPI 13 0x304>; + clocks = <&dummy150m>; + }; + + uart0: serial@10124000 { + compatible = "snps,dw-apb-uart"; + reg = <0x10124000 0x400>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <1>; + clocks = <&clk_gates1 8>; + status = "disabled"; + }; + + uart1: serial@10126000 { + compatible = "snps,dw-apb-uart"; + reg = <0x10126000 0x400>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <1>; + clocks = <&clk_gates1 10>; + status = "disabled"; + }; + + uart2: serial@20064000 { + compatible = "snps,dw-apb-uart"; + reg = <0x20064000 0x400>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <1>; + clocks = <&clk_gates1 12>; + status = "disabled"; + }; + + uart3: serial@20068000 { + compatible = "snps,dw-apb-uart"; + reg = <0x20068000 0x400>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <1>; + clocks = <&clk_gates1 14>; + status = "disabled"; + }; + + dwmmc@10214000 { + compatible = "rockchip,rk2928-dw-mshc"; + reg = <0x10214000 0x1000>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + + clocks = <&clk_gates5 10>, <&clk_gates2 11>; + clock-names = "biu", "ciu"; + + status = "disabled"; + }; + + dwmmc@10218000 { + compatible = "rockchip,rk2928-dw-mshc"; + reg = <0x10218000 0x1000>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + + clocks = <&clk_gates5 11>, <&clk_gates2 13>; + clock-names = "biu", "ciu"; + + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/s3c6400.dtsi b/arch/arm/boot/dts/s3c6400.dtsi new file mode 100644 index 00000000000..a7d1c8ec150 --- /dev/null +++ b/arch/arm/boot/dts/s3c6400.dtsi @@ -0,0 +1,41 @@ +/* + * Samsung's S3C6400 SoC device tree source + * + * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com> + * + * Samsung's S3C6400 SoC device nodes are listed in this file. S3C6400 + * based board files can include this file and provide values for board specfic + * bindings. + * + * Note: This file does not include device nodes for all the controllers in + * S3C6400 SoC. As device tree coverage for S3C6400 increases, additional + * nodes can be added to this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include "s3c64xx.dtsi" + +/ { + compatible = "samsung,s3c6400"; +}; + +&vic0 { + valid-mask = <0xfffffe1f>; + valid-wakeup-mask = <0x00200004>; +}; + +&vic1 { + valid-mask = <0xffffffff>; + valid-wakeup-mask = <0x53020000>; +}; + +&soc { + clocks: clock-controller@7e00f000 { + compatible = "samsung,s3c6400-clock"; + reg = <0x7e00f000 0x1000>; + #clock-cells = <1>; + }; +}; diff --git a/arch/arm/boot/dts/s3c6410-mini6410.dts b/arch/arm/boot/dts/s3c6410-mini6410.dts new file mode 100644 index 00000000000..57e00f9bce9 --- /dev/null +++ b/arch/arm/boot/dts/s3c6410-mini6410.dts @@ -0,0 +1,228 @@ +/* + * Samsung's S3C6410 based Mini6410 board device tree source + * + * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com> + * + * Device tree source file for FriendlyARM Mini6410 board which is based on + * Samsung's S3C6410 SoC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> + +#include "s3c6410.dtsi" + +/ { + model = "FriendlyARM Mini6410 board based on S3C6410"; + compatible = "friendlyarm,mini6410", "samsung,s3c6410"; + + memory { + reg = <0x50000000 0x10000000>; + }; + + chosen { + bootargs = "console=ttySAC0,115200n8 earlyprintk rootwait root=/dev/mmcblk0p1"; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + fin_pll: oscillator@0 { + compatible = "fixed-clock"; + reg = <0>; + clock-frequency = <12000000>; + clock-output-names = "fin_pll"; + #clock-cells = <0>; + }; + + xusbxti: oscillator@1 { + compatible = "fixed-clock"; + reg = <1>; + clock-output-names = "xusbxti"; + clock-frequency = <48000000>; + #clock-cells = <0>; + }; + }; + + srom-cs1@18000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x18000000 0x8000000>; + ranges; + + ethernet@18000000 { + compatible = "davicom,dm9000"; + reg = <0x18000000 0x2 0x18000004 0x2>; + interrupt-parent = <&gpn>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH>; + davicom,no-eeprom; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys>; + autorepeat; + + button-k1 { + label = "K1"; + gpios = <&gpn 0 GPIO_ACTIVE_LOW>; + linux,code = <2>; + debounce-interval = <20>; + }; + + button-k2 { + label = "K2"; + gpios = <&gpn 1 GPIO_ACTIVE_LOW>; + linux,code = <3>; + debounce-interval = <20>; + }; + + button-k3 { + label = "K3"; + gpios = <&gpn 2 GPIO_ACTIVE_LOW>; + linux,code = <4>; + debounce-interval = <20>; + }; + + button-k4 { + label = "K4"; + gpios = <&gpn 3 GPIO_ACTIVE_LOW>; + linux,code = <5>; + debounce-interval = <20>; + }; + + button-k5 { + label = "K5"; + gpios = <&gpn 4 GPIO_ACTIVE_LOW>; + linux,code = <6>; + debounce-interval = <20>; + }; + + button-k6 { + label = "K6"; + gpios = <&gpn 5 GPIO_ACTIVE_LOW>; + linux,code = <7>; + debounce-interval = <20>; + }; + + button-k7 { + label = "K7"; + gpios = <&gpl 11 GPIO_ACTIVE_LOW>; + linux,code = <8>; + debounce-interval = <20>; + }; + + button-k8 { + label = "K8"; + gpios = <&gpl 12 GPIO_ACTIVE_LOW>; + linux,code = <9>; + debounce-interval = <20>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_leds>; + + led-1 { + label = "LED1"; + gpios = <&gpk 4 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + + led-2 { + label = "LED2"; + gpios = <&gpk 5 GPIO_ACTIVE_LOW>; + linux,default-trigger = "mmc0"; + }; + + led-3 { + label = "LED3"; + gpios = <&gpk 6 GPIO_ACTIVE_LOW>; + }; + + led-4 { + label = "LED4"; + gpios = <&gpk 7 GPIO_ACTIVE_LOW>; + }; + }; + + buzzer { + compatible = "pwm-beeper"; + pwms = <&pwm 0 1000000 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_out>; + }; +}; + +&sdhci0 { + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>; + bus-width = <4>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_data>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_data>, <&uart1_fctl>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_data>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_data>; + status = "okay"; +}; + +&pwm { + status = "okay"; +}; + +&pinctrl0 { + gpio_leds: gpio-leds { + samsung,pins = "gpk-4", "gpk-5", "gpk-6", "gpk-7"; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + gpio_keys: gpio-keys { + samsung,pins = "gpn-0", "gpn-1", "gpn-2", "gpn-3", + "gpn-4", "gpn-5", "gpl-11", "gpl-12"; + samsung,pin-pud = <PIN_PULL_NONE>; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_bus>; + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c08"; + reg = <0x50>; + pagesize = <16>; + }; +}; diff --git a/arch/arm/boot/dts/s3c6410-smdk6410.dts b/arch/arm/boot/dts/s3c6410-smdk6410.dts new file mode 100644 index 00000000000..ecf35ec466f --- /dev/null +++ b/arch/arm/boot/dts/s3c6410-smdk6410.dts @@ -0,0 +1,103 @@ +/* + * Samsung S3C6410 based SMDK6410 board device tree source. + * + * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com> + * + * Device tree source file for SAMSUNG SMDK6410 board which is based on + * Samsung's S3C6410 SoC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> + +#include "s3c6410.dtsi" + +/ { + model = "SAMSUNG SMDK6410 board based on S3C6410"; + compatible = "samsung,mini6410", "samsung,s3c6410"; + + memory { + reg = <0x50000000 0x8000000>; + }; + + chosen { + bootargs = "console=ttySAC0,115200n8 earlyprintk rootwait root=/dev/mmcblk0p1"; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + fin_pll: oscillator@0 { + compatible = "fixed-clock"; + reg = <0>; + clock-frequency = <12000000>; + clock-output-names = "fin_pll"; + #clock-cells = <0>; + }; + + xusbxti: oscillator@1 { + compatible = "fixed-clock"; + reg = <1>; + clock-output-names = "xusbxti"; + clock-frequency = <48000000>; + #clock-cells = <0>; + }; + }; + + srom-cs1@18000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x18000000 0x8000000>; + ranges; + + ethernet@18000000 { + compatible = "smsc,lan9115"; + reg = <0x18000000 0x10000>; + interrupt-parent = <&gpn>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; + phy-mode = "mii"; + reg-io-width = <4>; + smsc,force-internal-phy; + }; + }; +}; + +&sdhci0 { + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>; + bus-width = <4>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_data>, <&uart0_fctl>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_data>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_data>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_data>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/s3c6410.dtsi b/arch/arm/boot/dts/s3c6410.dtsi new file mode 100644 index 00000000000..eb4226b3407 --- /dev/null +++ b/arch/arm/boot/dts/s3c6410.dtsi @@ -0,0 +1,57 @@ +/* + * Samsung's S3C6410 SoC device tree source + * + * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com> + * + * Samsung's S3C6410 SoC device nodes are listed in this file. S3C6410 + * based board files can include this file and provide values for board specfic + * bindings. + * + * Note: This file does not include device nodes for all the controllers in + * S3C6410 SoC. As device tree coverage for S3C6410 increases, additional + * nodes can be added to this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include "s3c64xx.dtsi" + +/ { + compatible = "samsung,s3c6410"; + + aliases { + i2c1 = &i2c1; + }; +}; + +&vic0 { + valid-mask = <0xffffff7f>; + valid-wakeup-mask = <0x00200004>; +}; + +&vic1 { + valid-mask = <0xffffffff>; + valid-wakeup-mask = <0x53020000>; +}; + +&soc { + clocks: clock-controller@7e00f000 { + compatible = "samsung,s3c6410-clock"; + reg = <0x7e00f000 0x1000>; + #clock-cells = <1>; + }; + + i2c1: i2c@7f00f000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x7f00f000 0x1000>; + interrupt-parent = <&vic0>; + interrupts = <5>; + clock-names = "i2c"; + clocks = <&clocks PCLK_IIC1>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi b/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi new file mode 100644 index 00000000000..b1197d8b04d --- /dev/null +++ b/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi @@ -0,0 +1,687 @@ +/* + * Samsung's S3C64xx SoC series common device tree source + * - pin control-related definitions + * + * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com> + * + * Samsung's S3C64xx SoCs pin banks, pin-mux and pin-config options are + * listed as device tree nodes in this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define PIN_PULL_NONE 0 +#define PIN_PULL_DOWN 1 +#define PIN_PULL_UP 2 + +&pinctrl0 { + /* + * Pin banks + */ + + gpa: gpa { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb: gpb { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc: gpc { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd: gpd { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe: gpe { + gpio-controller; + #gpio-cells = <2>; + }; + + gpf: gpf { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg: gpg { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gph: gph { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpi: gpi { + gpio-controller; + #gpio-cells = <2>; + }; + + gpj: gpj { + gpio-controller; + #gpio-cells = <2>; + }; + + gpk: gpk { + gpio-controller; + #gpio-cells = <2>; + }; + + gpl: gpl { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpm: gpm { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpn: gpn { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpo: gpo { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp: gpp { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpq: gpq { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + /* + * Pin groups + */ + + uart0_data: uart0-data { + samsung,pins = "gpa-0", "gpa-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + uart0_fctl: uart0-fctl { + samsung,pins = "gpa-2", "gpa-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + uart1_data: uart1-data { + samsung,pins = "gpa-4", "gpa-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + uart1_fctl: uart1-fctl { + samsung,pins = "gpa-6", "gpa-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + uart2_data: uart2-data { + samsung,pins = "gpb-0", "gpb-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + uart3_data: uart3-data { + samsung,pins = "gpb-2", "gpb-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + ext_dma_0: ext-dma-0 { + samsung,pins = "gpb-0", "gpb-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + ext_dma_1: ext-dma-1 { + samsung,pins = "gpb-2", "gpb-3"; + samsung,pin-function = <4>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + irda_data_0: irda-data-0 { + samsung,pins = "gpb-0", "gpb-1"; + samsung,pin-function = <4>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + irda_data_1: irda-data-1 { + samsung,pins = "gpb-2", "gpb-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + irda_sdbw: irda-sdbw { + samsung,pins = "gpb-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + i2c0_bus: i2c0-bus { + samsung,pins = "gpb-5", "gpb-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + }; + + i2c1_bus: i2c1-bus { + /* S3C6410-only */ + samsung,pins = "gpb-2", "gpb-3"; + samsung,pin-function = <6>; + samsung,pin-pud = <PIN_PULL_UP>; + }; + + spi0_bus: spi0-bus { + samsung,pins = "gpc-0", "gpc-1", "gpc-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + }; + + spi0_cs: spi0-cs { + samsung,pins = "gpc-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + spi1_bus: spi1-bus { + samsung,pins = "gpc-4", "gpc-5", "gpc-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + }; + + spi1_cs: spi1-cs { + samsung,pins = "gpc-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + sd0_cmd: sd0-cmd { + samsung,pins = "gpg-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + sd0_clk: sd0-clk { + samsung,pins = "gpg-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + sd0_bus1: sd0-bus1 { + samsung,pins = "gpg-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + sd0_bus4: sd0-bus4 { + samsung,pins = "gpg-2", "gpg-3", "gpg-4", "gpg-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + sd0_cd: sd0-cd { + samsung,pins = "gpg-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + }; + + sd1_cmd: sd1-cmd { + samsung,pins = "gph-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + sd1_clk: sd1-clk { + samsung,pins = "gph-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + sd1_bus1: sd1-bus1 { + samsung,pins = "gph-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + sd1_bus4: sd1-bus4 { + samsung,pins = "gph-2", "gph-3", "gph-4", "gph-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + sd1_bus8: sd1-bus8 { + samsung,pins = "gph-2", "gph-3", "gph-4", "gph-5", + "gph-6", "gph-7", "gph-8", "gph-9"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + sd1_cd: sd1-cd { + samsung,pins = "gpg-6"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_UP>; + }; + + sd2_cmd: sd2-cmd { + samsung,pins = "gpc-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + sd2_clk: sd2-clk { + samsung,pins = "gpc-5"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + sd2_bus1: sd2-bus1 { + samsung,pins = "gph-6"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + sd2_bus4: sd2-bus4 { + samsung,pins = "gph-6", "gph-7", "gph-8", "gph-9"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + i2s0_bus: i2s0-bus { + samsung,pins = "gpd-0", "gpd-2", "gpd-3", "gpd-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + i2s0_cdclk: i2s0-cdclk { + samsung,pins = "gpd-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + i2s1_bus: i2s1-bus { + samsung,pins = "gpe-0", "gpe-2", "gpe-3", "gpe-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + i2s1_cdclk: i2s1-cdclk { + samsung,pins = "gpe-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + i2s2_bus: i2s2-bus { + /* S3C6410-only */ + samsung,pins = "gpc-4", "gpc-5", "gpc-6", "gph-6", + "gph-8", "gph-9"; + samsung,pin-function = <5>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + i2s2_cdclk: i2s2-cdclk { + /* S3C6410-only */ + samsung,pins = "gph-7"; + samsung,pin-function = <5>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + pcm0_bus: pcm0-bus { + samsung,pins = "gpd-0", "gpd-2", "gpd-3", "gpd-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + pcm0_extclk: pcm0-extclk { + samsung,pins = "gpd-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + pcm1_bus: pcm1-bus { + samsung,pins = "gpe-0", "gpe-2", "gpe-3", "gpe-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + pcm1_extclk: pcm1-extclk { + samsung,pins = "gpe-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + ac97_bus_0: ac97-bus-0 { + samsung,pins = "gpd-0", "gpd-1", "gpd-2", "gpd-3", "gpd-4"; + samsung,pin-function = <4>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + ac97_bus_1: ac97-bus-1 { + samsung,pins = "gpe-0", "gpe-1", "gpe-2", "gpe-3", "gpe-4"; + samsung,pin-function = <4>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + cam_port: cam-port { + samsung,pins = "gpf-0", "gpf-1", "gpf-2", "gpf-4", + "gpf-5", "gpf-6", "gpf-7", "gpf-8", + "gpf-9", "gpf-10", "gpf-11", "gpf-12"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + cam_rst: cam-rst { + samsung,pins = "gpf-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + cam_field: cam-field { + /* S3C6410-only */ + samsung,pins = "gpb-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + pwm_extclk: pwm-extclk { + samsung,pins = "gpf-13"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + pwm0_out: pwm0-out { + samsung,pins = "gpf-14"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + pwm1_out: pwm1-out { + samsung,pins = "gpf-15"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + clkout0: clkout-0 { + samsung,pins = "gpf-14"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + keypad_col0_0: keypad-col0-0 { + samsung,pins = "gph-0"; + samsung,pin-function = <4>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + keypad_col1_0: keypad-col1-0 { + samsung,pins = "gph-1"; + samsung,pin-function = <4>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + keypad_col2_0: keypad-col2-0 { + samsung,pins = "gph-2"; + samsung,pin-function = <4>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + keypad_col3_0: keypad-col3-0 { + samsung,pins = "gph-3"; + samsung,pin-function = <4>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + keypad_col4_0: keypad-col4-0 { + samsung,pins = "gph-4"; + samsung,pin-function = <4>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + keypad_col5_0: keypad-col5-0 { + samsung,pins = "gph-5"; + samsung,pin-function = <4>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + keypad_col6_0: keypad-col6-0 { + samsung,pins = "gph-6"; + samsung,pin-function = <4>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + keypad_col7_0: keypad-col7-0 { + samsung,pins = "gph-7"; + samsung,pin-function = <4>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + keypad_col0_1: keypad-col0-1 { + samsung,pins = "gpl-0"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + keypad_col1_1: keypad-col1-1 { + samsung,pins = "gpl-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + keypad_col2_1: keypad-col2-1 { + samsung,pins = "gpl-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + keypad_col3_1: keypad-col3-1 { + samsung,pins = "gpl-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + keypad_col4_1: keypad-col4-1 { + samsung,pins = "gpl-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + keypad_col5_1: keypad-col5-1 { + samsung,pins = "gpl-5"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + keypad_col6_1: keypad-col6-1 { + samsung,pins = "gpl-6"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + keypad_col7_1: keypad-col7-1 { + samsung,pins = "gpl-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + keypad_row0_0: keypad-row0-0 { + samsung,pins = "gpk-8"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + keypad_row1_0: keypad-row1-0 { + samsung,pins = "gpk-9"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + keypad_row2_0: keypad-row2-0 { + samsung,pins = "gpk-10"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + keypad_row3_0: keypad-row3-0 { + samsung,pins = "gpk-11"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + keypad_row4_0: keypad-row4-0 { + samsung,pins = "gpk-12"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + keypad_row5_0: keypad-row5-0 { + samsung,pins = "gpk-13"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + keypad_row6_0: keypad-row6-0 { + samsung,pins = "gpk-14"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + keypad_row7_0: keypad-row7-0 { + samsung,pins = "gpk-15"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + keypad_row0_1: keypad-row0-1 { + samsung,pins = "gpn-0"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + keypad_row1_1: keypad-row1-1 { + samsung,pins = "gpn-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + keypad_row2_1: keypad-row2-1 { + samsung,pins = "gpn-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + keypad_row3_1: keypad-row3-1 { + samsung,pins = "gpn-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + keypad_row4_1: keypad-row4-1 { + samsung,pins = "gpn-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + keypad_row5_1: keypad-row5-1 { + samsung,pins = "gpn-5"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + keypad_row6_1: keypad-row6-1 { + samsung,pins = "gpn-6"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + keypad_row7_1: keypad-row7-1 { + samsung,pins = "gpn-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + lcd_ctrl: lcd-ctrl { + samsung,pins = "gpj-8", "gpj-9", "gpj-10", "gpj-11"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + lcd_data16: lcd-data-width16 { + samsung,pins = "gpi-3", "gpi-4", "gpi-5", "gpi-6", + "gpi-7", "gpi-10", "gpi-11", "gpi-12", + "gpi-13", "gpi-14", "gpi-15", "gpj-3", + "gpj-4", "gpj-5", "gpj-6", "gpj-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + lcd_data18: lcd-data-width18 { + samsung,pins = "gpi-2", "gpi-3", "gpi-4", "gpi-5", + "gpi-6", "gpi-7", "gpi-10", "gpi-11", + "gpi-12", "gpi-13", "gpi-14", "gpi-15", + "gpj-2", "gpj-3", "gpj-4", "gpj-5", + "gpj-6", "gpj-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + lcd_data24: lcd-data-width24 { + samsung,pins = "gpi-0", "gpi-1", "gpi-2", "gpi-3", + "gpi-4", "gpi-5", "gpi-6", "gpi-7", + "gpi-8", "gpi-9", "gpi-10", "gpi-11", + "gpi-12", "gpi-13", "gpi-14", "gpi-15", + "gpj-0", "gpj-1", "gpj-2", "gpj-3", + "gpj-4", "gpj-5", "gpj-6", "gpj-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; + + hsi_bus: hsi-bus { + samsung,pins = "gpk-0", "gpk-1", "gpk-2", "gpk-3", + "gpk-4", "gpk-5", "gpk-6", "gpk-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + }; +}; diff --git a/arch/arm/boot/dts/s3c64xx.dtsi b/arch/arm/boot/dts/s3c64xx.dtsi new file mode 100644 index 00000000000..4e3be4d3493 --- /dev/null +++ b/arch/arm/boot/dts/s3c64xx.dtsi @@ -0,0 +1,199 @@ +/* + * Samsung's S3C64xx SoC series common device tree source + * + * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com> + * + * Samsung's S3C64xx SoC series device nodes are listed in this file. + * Particular SoCs from S3C64xx series can include this file and provide + * values for SoCs specfic bindings. + * + * Note: This file does not include device nodes for all the controllers in + * S3C64xx SoCs. As device tree coverage for S3C64xx increases, additional + * nodes can be added to this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "skeleton.dtsi" +#include <dt-bindings/clock/samsung,s3c64xx-clock.h> + +/ { + aliases { + i2c0 = &i2c0; + pinctrl0 = &pinctrl0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,arm1176jzf-s", "arm,arm1176"; + reg = <0x0>; + }; + }; + + soc: soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + vic0: interrupt-controller@71200000 { + compatible = "arm,pl192-vic"; + interrupt-controller; + reg = <0x71200000 0x1000>; + #interrupt-cells = <1>; + }; + + vic1: interrupt-controller@71300000 { + compatible = "arm,pl192-vic"; + interrupt-controller; + reg = <0x71300000 0x1000>; + #interrupt-cells = <1>; + }; + + sdhci0: sdhci@7c200000 { + compatible = "samsung,s3c6410-sdhci"; + reg = <0x7c200000 0x100>; + interrupt-parent = <&vic1>; + interrupts = <24>; + clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2"; + clocks = <&clocks HCLK_HSMMC0>, <&clocks HCLK_HSMMC0>, + <&clocks SCLK_MMC0>; + status = "disabled"; + }; + + sdhci1: sdhci@7c300000 { + compatible = "samsung,s3c6410-sdhci"; + reg = <0x7c300000 0x100>; + interrupt-parent = <&vic1>; + interrupts = <25>; + clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2"; + clocks = <&clocks HCLK_HSMMC1>, <&clocks HCLK_HSMMC1>, + <&clocks SCLK_MMC1>; + status = "disabled"; + }; + + sdhci2: sdhci@7c400000 { + compatible = "samsung,s3c6410-sdhci"; + reg = <0x7c400000 0x100>; + interrupt-parent = <&vic1>; + interrupts = <17>; + clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2"; + clocks = <&clocks HCLK_HSMMC2>, <&clocks HCLK_HSMMC2>, + <&clocks SCLK_MMC2>; + status = "disabled"; + }; + + watchdog: watchdog@7e004000 { + compatible = "samsung,s3c2410-wdt"; + reg = <0x7e004000 0x1000>; + interrupt-parent = <&vic0>; + interrupts = <26>; + clock-names = "watchdog"; + clocks = <&clocks PCLK_WDT>; + status = "disabled"; + }; + + i2c0: i2c@7f004000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x7f004000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <18>; + clock-names = "i2c"; + clocks = <&clocks PCLK_IIC0>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + uart0: serial@7f005000 { + compatible = "samsung,s3c6400-uart"; + reg = <0x7f005000 0x100>; + interrupt-parent = <&vic1>; + interrupts = <5>; + clock-names = "uart", "clk_uart_baud2", + "clk_uart_baud3"; + clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>, + <&clocks SCLK_UART>; + status = "disabled"; + }; + + uart1: serial@7f005400 { + compatible = "samsung,s3c6400-uart"; + reg = <0x7f005400 0x100>; + interrupt-parent = <&vic1>; + interrupts = <6>; + clock-names = "uart", "clk_uart_baud2", + "clk_uart_baud3"; + clocks = <&clocks PCLK_UART1>, <&clocks PCLK_UART1>, + <&clocks SCLK_UART>; + status = "disabled"; + }; + + uart2: serial@7f005800 { + compatible = "samsung,s3c6400-uart"; + reg = <0x7f005800 0x100>; + interrupt-parent = <&vic1>; + interrupts = <7>; + clock-names = "uart", "clk_uart_baud2", + "clk_uart_baud3"; + clocks = <&clocks PCLK_UART2>, <&clocks PCLK_UART2>, + <&clocks SCLK_UART>; + status = "disabled"; + }; + + uart3: serial@7f005c00 { + compatible = "samsung,s3c6400-uart"; + reg = <0x7f005c00 0x100>; + interrupt-parent = <&vic1>; + interrupts = <8>; + clock-names = "uart", "clk_uart_baud2", + "clk_uart_baud3"; + clocks = <&clocks PCLK_UART3>, <&clocks PCLK_UART3>, + <&clocks SCLK_UART>; + status = "disabled"; + }; + + pwm: pwm@7f006000 { + compatible = "samsung,s3c6400-pwm"; + reg = <0x7f006000 0x1000>; + interrupt-parent = <&vic0>; + interrupts = <23>, <24>, <25>, <27>, <28>; + clock-names = "timers"; + clocks = <&clocks PCLK_PWM>; + samsung,pwm-outputs = <0>, <1>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pinctrl0: pinctrl@7f008000 { + compatible = "samsung,s3c64xx-pinctrl"; + reg = <0x7f008000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <21>; + + pctrl_int_map: pinctrl-interrupt-map { + interrupt-map = <0 &vic0 0>, + <1 &vic0 1>, + <2 &vic1 0>, + <3 &vic1 1>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <1>; + }; + + wakeup-interrupt-controller { + compatible = "samsung,s3c64xx-wakeup-eint"; + interrupts = <0>, <1>, <2>, <3>; + interrupt-parent = <&pctrl_int_map>; + }; + }; + }; +}; + +#include "s3c64xx-pinctrl.dtsi" diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index b7f49615120..5cdaba4cea8 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -31,7 +31,6 @@ gpio3 = &pioD; gpio4 = &pioE; tcb0 = &tcb0; - tcb1 = &tcb1; i2c0 = &i2c0; i2c1 = &i2c1; i2c2 = &i2c2; @@ -105,15 +104,6 @@ status = "disabled"; }; - can0: can@f000c000 { - compatible = "atmel,at91sam9x5-can"; - reg = <0xf000c000 0x300>; - interrupts = <40 IRQ_TYPE_LEVEL_HIGH 3>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_can0_rx_tx>; - status = "disabled"; - }; - tcb0: timer@f0010000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf0010000 0x100>; @@ -166,15 +156,6 @@ status = "disabled"; }; - macb0: ethernet@f0028000 { - compatible = "cdns,pc302-gem", "cdns,gem"; - reg = <0xf0028000 0x100>; - interrupts = <34 IRQ_TYPE_LEVEL_HIGH 3>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_macb0_data_rgmii &pinctrl_macb0_signal_rgmii>; - status = "disabled"; - }; - isi: isi@f0034000 { compatible = "atmel,at91sam9g45-isi"; reg = <0xf0034000 0x4000>; @@ -195,19 +176,6 @@ #size-cells = <0>; }; - mmc2: mmc@f8004000 { - compatible = "atmel,hsmci"; - reg = <0xf8004000 0x600>; - interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>; - dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(1)>; - dma-names = "rxtx"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_mmc2_clk_cmd_dat0 &pinctrl_mmc2_dat1_3>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - spi1: spi@f8008000 { #address-cells = <1>; #size-cells = <0>; @@ -231,20 +199,6 @@ status = "disabled"; }; - can1: can@f8010000 { - compatible = "atmel,at91sam9x5-can"; - reg = <0xf8010000 0x300>; - interrupts = <41 IRQ_TYPE_LEVEL_HIGH 3>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_can1_rx_tx>; - }; - - tcb1: timer@f8014000 { - compatible = "atmel,at91sam9x5-tcb"; - reg = <0xf8014000 0x100>; - interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>; - }; - adc0: adc@f8018000 { compatible = "atmel,at91sam9260-adc"; reg = <0xf8018000 0x100>; @@ -341,15 +295,6 @@ status = "disabled"; }; - macb1: ethernet@f802c000 { - compatible = "cdns,at32ap7000-macb", "cdns,macb"; - reg = <0xf802c000 0x100>; - interrupts = <35 IRQ_TYPE_LEVEL_HIGH 3>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_macb1_rmii>; - status = "disabled"; - }; - sha@f8034000 { compatible = "atmel,sam9g46-sha"; reg = <0xf8034000 0x100>; @@ -474,22 +419,6 @@ }; }; - can0 { - pinctrl_can0_rx_tx: can0_rx_tx { - atmel,pins = - <AT91_PIOD 14 AT91_PERIPH_C AT91_PINCTRL_NONE /* PD14 periph C RX, conflicts with SCK0, SPI0_NPCS1 */ - AT91_PIOD 15 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PD15 periph C TX, conflicts with CTS0, SPI0_NPCS2 */ - }; - }; - - can1 { - pinctrl_can1_rx_tx: can1_rx_tx { - atmel,pins = - <AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB14 periph B RX, conflicts with GCRS */ - AT91_PIOB 15 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB15 periph B TX, conflicts with GCOL */ - }; - }; - dbgu { pinctrl_dbgu: dbgu-0 { atmel,pins = @@ -537,107 +466,6 @@ }; }; - lcd { - pinctrl_lcd: lcd-0 { - atmel,pins = - <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA24 periph A LCDPWM */ - AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA26 periph A LCDVSYNC */ - AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA27 periph A LCDHSYNC */ - AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA25 periph A LCDDISP */ - AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA29 periph A LCDDEN */ - AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA28 periph A LCDPCK */ - AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA0 periph A LCDD0 pin */ - AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA1 periph A LCDD1 pin */ - AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA2 periph A LCDD2 pin */ - AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA3 periph A LCDD3 pin */ - AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA4 periph A LCDD4 pin */ - AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA5 periph A LCDD5 pin */ - AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA6 periph A LCDD6 pin */ - AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA7 periph A LCDD7 pin */ - AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA8 periph A LCDD8 pin */ - AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA9 periph A LCDD9 pin */ - AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA10 periph A LCDD10 pin */ - AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA11 periph A LCDD11 pin */ - AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA12 periph A LCDD12 pin */ - AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA13 periph A LCDD13 pin */ - AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA14 periph A LCDD14 pin */ - AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA15 periph A LCDD15 pin */ - AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC14 periph C LCDD16 pin */ - AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC13 periph C LCDD17 pin */ - AT91_PIOC 12 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC12 periph C LCDD18 pin */ - AT91_PIOC 11 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC11 periph C LCDD19 pin */ - AT91_PIOC 10 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC10 periph C LCDD20 pin */ - AT91_PIOC 15 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC15 periph C LCDD21 pin */ - AT91_PIOE 27 AT91_PERIPH_C AT91_PINCTRL_NONE /* PE27 periph C LCDD22 pin */ - AT91_PIOE 28 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PE28 periph C LCDD23 pin */ - }; - }; - - macb0 { - pinctrl_macb0_data_rgmii: macb0_data_rgmii { - atmel,pins = - <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB0 periph A GTX0, conflicts with PWMH0 */ - AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A GTX1, conflicts with PWML0 */ - AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB2 periph A GTX2, conflicts with TK1 */ - AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB3 periph A GTX3, conflicts with TF1 */ - AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB4 periph A GRX0, conflicts with PWMH1 */ - AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB5 periph A GRX1, conflicts with PWML1 */ - AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A GRX2, conflicts with TD1 */ - AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB7 periph A GRX3, conflicts with RK1 */ - }; - pinctrl_macb0_data_gmii: macb0_data_gmii { - atmel,pins = - <AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB19 periph B GTX4, conflicts with MCI1_CDA */ - AT91_PIOB 20 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB20 periph B GTX5, conflicts with MCI1_DA0 */ - AT91_PIOB 21 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB21 periph B GTX6, conflicts with MCI1_DA1 */ - AT91_PIOB 22 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB22 periph B GTX7, conflicts with MCI1_DA2 */ - AT91_PIOB 23 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB23 periph B GRX4, conflicts with MCI1_DA3 */ - AT91_PIOB 24 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB24 periph B GRX5, conflicts with MCI1_CK */ - AT91_PIOB 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB25 periph B GRX6, conflicts with SCK1 */ - AT91_PIOB 26 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB26 periph B GRX7, conflicts with CTS1 */ - }; - pinctrl_macb0_signal_rgmii: macb0_signal_rgmii { - atmel,pins = - <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB8 periph A GTXCK, conflicts with PWMH2 */ - AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A GTXEN, conflicts with PWML2 */ - AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB11 periph A GRXCK, conflicts with RD1 */ - AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A GRXER, conflicts with PWML3 */ - AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB16 periph A GMDC */ - AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB17 periph A GMDIO */ - AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB18 periph A G125CK */ - }; - pinctrl_macb0_signal_gmii: macb0_signal_gmii { - atmel,pins = - <AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A GTXEN, conflicts with PWML2 */ - AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB10 periph A GTXER, conflicts with RF1 */ - AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB11 periph A GRXCK, conflicts with RD1 */ - AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB12 periph A GRXDV, conflicts with PWMH3 */ - AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A GRXER, conflicts with PWML3 */ - AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB14 periph A GCRS, conflicts with CANRX1 */ - AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB15 periph A GCOL, conflicts with CANTX1 */ - AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB16 periph A GMDC */ - AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB17 periph A GMDIO */ - AT91_PIOB 27 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB27 periph B G125CKO */ - }; - - }; - - macb1 { - pinctrl_macb1_rmii: macb1_rmii-0 { - atmel,pins = - <AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC0 periph A ETX0, conflicts with TIOA3 */ - AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC1 periph A ETX1, conflicts with TIOB3 */ - AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC2 periph A ERX0, conflicts with TCLK3 */ - AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC3 periph A ERX1, conflicts with TIOA4 */ - AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC4 periph A ETXEN, conflicts with TIOB4 */ - AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC5 periph A ECRSDV,conflicts with TCLK4 */ - AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC6 periph A ERXER, conflicts with TIOA5 */ - AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC7 periph A EREFCK, conflicts with TIOB5 */ - AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC8 periph A EMDC, conflicts with TCLK5 */ - AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC9 periph A EMDIO */ - }; - }; - mmc0 { pinctrl_mmc0_clk_cmd_dat0: mmc0_clk_cmd_dat0 { atmel,pins = @@ -675,21 +503,6 @@ }; }; - mmc2 { - pinctrl_mmc2_clk_cmd_dat0: mmc2_clk_cmd_dat0 { - atmel,pins = - <AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC15 periph A MCI2_CK, conflicts with PCK2 */ - AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PC10 periph A MCI2_CDA with pullup */ - AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PC11 periph A MCI2_DA0 with pullup */ - }; - pinctrl_mmc2_dat1_3: mmc2_dat1_3 { - atmel,pins = - <AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC12 periph A MCI2_DA1 with pullup, conflicts with TIOA1 */ - AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC13 periph A MCI2_DA2 with pullup, conflicts with TIOB1 */ - AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC14 periph A MCI2_DA3 with pullup, conflicts with TCLK1 */ - }; - }; - nand0 { pinctrl_nand0_ale_cle: nand0_ale_cle-0 { atmel,pins = @@ -748,22 +561,6 @@ }; }; - uart0 { - pinctrl_uart0: uart0-0 { - atmel,pins = - <AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC29 periph A, conflicts with PWMFI2, ISI_D8 */ - AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PC30 periph A with pullup, conflicts with ISI_PCK */ - }; - }; - - uart1 { - pinctrl_uart1: uart1-0 { - atmel,pins = - <AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA30 periph B, conflicts with TWD0, ISI_VSYNC */ - AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA31 periph B with pullup, conflicts with TWCK0, ISI_HSYNC */ - }; - }; - usart0 { pinctrl_usart0: usart0-0 { atmel,pins = diff --git a/arch/arm/boot/dts/sama5d31.dtsi b/arch/arm/boot/dts/sama5d31.dtsi new file mode 100644 index 00000000000..7997dc9863e --- /dev/null +++ b/arch/arm/boot/dts/sama5d31.dtsi @@ -0,0 +1,16 @@ +/* + * sama5d31.dtsi - Device Tree Include file for SAMA5D31 SoC + * + * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> + * + * Licensed under GPLv2 or later. + */ +#include "sama5d3.dtsi" +#include "sama5d3_lcd.dtsi" +#include "sama5d3_emac.dtsi" +#include "sama5d3_mci2.dtsi" +#include "sama5d3_uart.dtsi" + +/ { + compatible = "atmel,samad31", "atmel,sama5d3", "atmel,sama5"; +}; diff --git a/arch/arm/boot/dts/sama5d31ek.dts b/arch/arm/boot/dts/sama5d31ek.dts index 027bac7510b..04eec0dfcf7 100644 --- a/arch/arm/boot/dts/sama5d31ek.dts +++ b/arch/arm/boot/dts/sama5d31ek.dts @@ -7,12 +7,13 @@ * Licensed under GPLv2 or later. */ /dts-v1/; +#include "sama5d31.dtsi" #include "sama5d3xmb.dtsi" #include "sama5d3xdm.dtsi" / { model = "Atmel SAMA5D31-EK"; - compatible = "atmel,sama5d31ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5"; + compatible = "atmel,sama5d31ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5"; ahb { apb { diff --git a/arch/arm/boot/dts/sama5d33.dtsi b/arch/arm/boot/dts/sama5d33.dtsi new file mode 100644 index 00000000000..39f832253ca --- /dev/null +++ b/arch/arm/boot/dts/sama5d33.dtsi @@ -0,0 +1,14 @@ +/* + * sama5d33.dtsi - Device Tree Include file for SAMA5D33 SoC + * + * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> + * + * Licensed under GPLv2 or later. + */ +#include "sama5d3.dtsi" +#include "sama5d3_lcd.dtsi" +#include "sama5d3_gmac.dtsi" + +/ { + compatible = "atmel,samad33", "atmel,sama5d3", "atmel,sama5"; +}; diff --git a/arch/arm/boot/dts/sama5d33ek.dts b/arch/arm/boot/dts/sama5d33ek.dts index 99bd0c8e047..cbd6a3ff154 100644 --- a/arch/arm/boot/dts/sama5d33ek.dts +++ b/arch/arm/boot/dts/sama5d33ek.dts @@ -7,12 +7,13 @@ * Licensed under GPLv2 or later. */ /dts-v1/; +#include "sama5d33.dtsi" #include "sama5d3xmb.dtsi" #include "sama5d3xdm.dtsi" / { model = "Atmel SAMA5D33-EK"; - compatible = "atmel,sama5d33ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5"; + compatible = "atmel,sama5d33ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d33", "atmel,sama5d3", "atmel,sama5"; ahb { apb { diff --git a/arch/arm/boot/dts/sama5d34.dtsi b/arch/arm/boot/dts/sama5d34.dtsi new file mode 100644 index 00000000000..89cda2c0da3 --- /dev/null +++ b/arch/arm/boot/dts/sama5d34.dtsi @@ -0,0 +1,16 @@ +/* + * sama5d34.dtsi - Device Tree Include file for SAMA5D34 SoC + * + * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> + * + * Licensed under GPLv2 or later. + */ +#include "sama5d3.dtsi" +#include "sama5d3_lcd.dtsi" +#include "sama5d3_gmac.dtsi" +#include "sama5d3_can.dtsi" +#include "sama5d3_mci2.dtsi" + +/ { + compatible = "atmel,samad34", "atmel,sama5d3", "atmel,sama5"; +}; diff --git a/arch/arm/boot/dts/sama5d34ek.dts b/arch/arm/boot/dts/sama5d34ek.dts index fb8ee11cf28..878aa164275 100644 --- a/arch/arm/boot/dts/sama5d34ek.dts +++ b/arch/arm/boot/dts/sama5d34ek.dts @@ -7,12 +7,13 @@ * Licensed under GPLv2 or later. */ /dts-v1/; +#include "sama5d34.dtsi" #include "sama5d3xmb.dtsi" #include "sama5d3xdm.dtsi" / { model = "Atmel SAMA5D34-EK"; - compatible = "atmel,sama5d34ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5"; + compatible = "atmel,sama5d34ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d34", "atmel,sama5d3", "atmel,sama5"; ahb { apb { diff --git a/arch/arm/boot/dts/sama5d35.dtsi b/arch/arm/boot/dts/sama5d35.dtsi new file mode 100644 index 00000000000..d20cd71b5f0 --- /dev/null +++ b/arch/arm/boot/dts/sama5d35.dtsi @@ -0,0 +1,18 @@ +/* + * sama5d35.dtsi - Device Tree Include file for SAMA5D35 SoC + * + * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> + * + * Licensed under GPLv2 or later. + */ +#include "sama5d3.dtsi" +#include "sama5d3_gmac.dtsi" +#include "sama5d3_emac.dtsi" +#include "sama5d3_can.dtsi" +#include "sama5d3_mci2.dtsi" +#include "sama5d3_uart.dtsi" +#include "sama5d3_tcb1.dtsi" + +/ { + compatible = "atmel,samad35", "atmel,sama5d3", "atmel,sama5"; +}; diff --git a/arch/arm/boot/dts/sama5d35ek.dts b/arch/arm/boot/dts/sama5d35ek.dts index 509a53d9cc7..9089c7c6cea 100644 --- a/arch/arm/boot/dts/sama5d35ek.dts +++ b/arch/arm/boot/dts/sama5d35ek.dts @@ -7,11 +7,12 @@ * Licensed under GPLv2 or later. */ /dts-v1/; +#include "sama5d35.dtsi" #include "sama5d3xmb.dtsi" / { model = "Atmel SAMA5D35-EK"; - compatible = "atmel,sama5d35ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5"; + compatible = "atmel,sama5d35ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d35", "atmel,sama5d3", "atmel,sama5"; ahb { apb { diff --git a/arch/arm/boot/dts/sama5d3_can.dtsi b/arch/arm/boot/dts/sama5d3_can.dtsi new file mode 100644 index 00000000000..8ed3260cef6 --- /dev/null +++ b/arch/arm/boot/dts/sama5d3_can.dtsi @@ -0,0 +1,54 @@ +/* + * at91sama5d3_can.dtsi - Device Tree Include file for AT91SAM9x5 SoC with + * CAN support + * + * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> + * + * Licensed under GPLv2. + */ + +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + ahb { + apb { + pinctrl@fffff200 { + can0 { + pinctrl_can0_rx_tx: can0_rx_tx { + atmel,pins = + <AT91_PIOD 14 AT91_PERIPH_C AT91_PINCTRL_NONE /* PD14 periph C RX, conflicts with SCK0, SPI0_NPCS1 */ + AT91_PIOD 15 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PD15 periph C TX, conflicts with CTS0, SPI0_NPCS2 */ + }; + }; + + can1 { + pinctrl_can1_rx_tx: can1_rx_tx { + atmel,pins = + <AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB14 periph B RX, conflicts with GCRS */ + AT91_PIOB 15 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB15 periph B TX, conflicts with GCOL */ + }; + }; + + }; + + can0: can@f000c000 { + compatible = "atmel,at91sam9x5-can"; + reg = <0xf000c000 0x300>; + interrupts = <40 IRQ_TYPE_LEVEL_HIGH 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can0_rx_tx>; + status = "disabled"; + }; + + can1: can@f8010000 { + compatible = "atmel,at91sam9x5-can"; + reg = <0xf8010000 0x300>; + interrupts = <41 IRQ_TYPE_LEVEL_HIGH 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1_rx_tx>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/sama5d3_emac.dtsi b/arch/arm/boot/dts/sama5d3_emac.dtsi new file mode 100644 index 00000000000..4d4f351f1f9 --- /dev/null +++ b/arch/arm/boot/dts/sama5d3_emac.dtsi @@ -0,0 +1,44 @@ +/* + * at91sama5d3_emac.dtsi - Device Tree Include file for AT91SAM9x5 SoC with + * Ethernet. + * + * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> + * + * Licensed under GPLv2. + */ + +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + ahb { + apb { + pinctrl@fffff200 { + macb1 { + pinctrl_macb1_rmii: macb1_rmii-0 { + atmel,pins = + <AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC0 periph A ETX0, conflicts with TIOA3 */ + AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC1 periph A ETX1, conflicts with TIOB3 */ + AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC2 periph A ERX0, conflicts with TCLK3 */ + AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC3 periph A ERX1, conflicts with TIOA4 */ + AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC4 periph A ETXEN, conflicts with TIOB4 */ + AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC5 periph A ECRSDV,conflicts with TCLK4 */ + AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC6 periph A ERXER, conflicts with TIOA5 */ + AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC7 periph A EREFCK, conflicts with TIOB5 */ + AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC8 periph A EMDC, conflicts with TCLK5 */ + AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC9 periph A EMDIO */ + }; + }; + }; + + macb1: ethernet@f802c000 { + compatible = "cdns,at32ap7000-macb", "cdns,macb"; + reg = <0xf802c000 0x100>; + interrupts = <35 IRQ_TYPE_LEVEL_HIGH 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb1_rmii>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/sama5d3_gmac.dtsi b/arch/arm/boot/dts/sama5d3_gmac.dtsi new file mode 100644 index 00000000000..0ba8be30ccd --- /dev/null +++ b/arch/arm/boot/dts/sama5d3_gmac.dtsi @@ -0,0 +1,77 @@ +/* + * at91sama5d3_gmac.dtsi - Device Tree Include file for AT91SAM9x5 SoC with + * Gigabit Ethernet. + * + * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> + * + * Licensed under GPLv2. + */ + +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + ahb { + apb { + pinctrl@fffff200 { + macb0 { + pinctrl_macb0_data_rgmii: macb0_data_rgmii { + atmel,pins = + <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB0 periph A GTX0, conflicts with PWMH0 */ + AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A GTX1, conflicts with PWML0 */ + AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB2 periph A GTX2, conflicts with TK1 */ + AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB3 periph A GTX3, conflicts with TF1 */ + AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB4 periph A GRX0, conflicts with PWMH1 */ + AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB5 periph A GRX1, conflicts with PWML1 */ + AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A GRX2, conflicts with TD1 */ + AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB7 periph A GRX3, conflicts with RK1 */ + }; + pinctrl_macb0_data_gmii: macb0_data_gmii { + atmel,pins = + <AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB19 periph B GTX4, conflicts with MCI1_CDA */ + AT91_PIOB 20 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB20 periph B GTX5, conflicts with MCI1_DA0 */ + AT91_PIOB 21 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB21 periph B GTX6, conflicts with MCI1_DA1 */ + AT91_PIOB 22 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB22 periph B GTX7, conflicts with MCI1_DA2 */ + AT91_PIOB 23 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB23 periph B GRX4, conflicts with MCI1_DA3 */ + AT91_PIOB 24 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB24 periph B GRX5, conflicts with MCI1_CK */ + AT91_PIOB 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB25 periph B GRX6, conflicts with SCK1 */ + AT91_PIOB 26 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB26 periph B GRX7, conflicts with CTS1 */ + }; + pinctrl_macb0_signal_rgmii: macb0_signal_rgmii { + atmel,pins = + <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB8 periph A GTXCK, conflicts with PWMH2 */ + AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A GTXEN, conflicts with PWML2 */ + AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB11 periph A GRXCK, conflicts with RD1 */ + AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A GRXER, conflicts with PWML3 */ + AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB16 periph A GMDC */ + AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB17 periph A GMDIO */ + AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB18 periph A G125CK */ + }; + pinctrl_macb0_signal_gmii: macb0_signal_gmii { + atmel,pins = + <AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A GTXEN, conflicts with PWML2 */ + AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB10 periph A GTXER, conflicts with RF1 */ + AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB11 periph A GRXCK, conflicts with RD1 */ + AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB12 periph A GRXDV, conflicts with PWMH3 */ + AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A GRXER, conflicts with PWML3 */ + AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB14 periph A GCRS, conflicts with CANRX1 */ + AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB15 periph A GCOL, conflicts with CANTX1 */ + AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB16 periph A GMDC */ + AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB17 periph A GMDIO */ + AT91_PIOB 27 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB27 periph B G125CKO */ + }; + + }; + }; + + macb0: ethernet@f0028000 { + compatible = "cdns,pc302-gem", "cdns,gem"; + reg = <0xf0028000 0x100>; + interrupts = <34 IRQ_TYPE_LEVEL_HIGH 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb0_data_rgmii &pinctrl_macb0_signal_rgmii>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/sama5d3_lcd.dtsi b/arch/arm/boot/dts/sama5d3_lcd.dtsi new file mode 100644 index 00000000000..01f52a79f8b --- /dev/null +++ b/arch/arm/boot/dts/sama5d3_lcd.dtsi @@ -0,0 +1,55 @@ +/* + * at91sama5d3_lcd.dtsi - Device Tree Include file for AT91SAM9x5 SoC with + * LCD support + * + * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> + * + * Licensed under GPLv2. + */ + +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + ahb { + apb { + pinctrl@fffff200 { + lcd { + pinctrl_lcd: lcd-0 { + atmel,pins = + <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA24 periph A LCDPWM */ + AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA26 periph A LCDVSYNC */ + AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA27 periph A LCDHSYNC */ + AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA25 periph A LCDDISP */ + AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA29 periph A LCDDEN */ + AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA28 periph A LCDPCK */ + AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA0 periph A LCDD0 pin */ + AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA1 periph A LCDD1 pin */ + AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA2 periph A LCDD2 pin */ + AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA3 periph A LCDD3 pin */ + AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA4 periph A LCDD4 pin */ + AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA5 periph A LCDD5 pin */ + AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA6 periph A LCDD6 pin */ + AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA7 periph A LCDD7 pin */ + AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA8 periph A LCDD8 pin */ + AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA9 periph A LCDD9 pin */ + AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA10 periph A LCDD10 pin */ + AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA11 periph A LCDD11 pin */ + AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA12 periph A LCDD12 pin */ + AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA13 periph A LCDD13 pin */ + AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA14 periph A LCDD14 pin */ + AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA15 periph A LCDD15 pin */ + AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC14 periph C LCDD16 pin */ + AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC13 periph C LCDD17 pin */ + AT91_PIOC 12 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC12 periph C LCDD18 pin */ + AT91_PIOC 11 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC11 periph C LCDD19 pin */ + AT91_PIOC 10 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC10 periph C LCDD20 pin */ + AT91_PIOC 15 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC15 periph C LCDD21 pin */ + AT91_PIOE 27 AT91_PERIPH_C AT91_PINCTRL_NONE /* PE27 periph C LCDD22 pin */ + AT91_PIOE 28 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PE28 periph C LCDD23 pin */ + }; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/sama5d3_mci2.dtsi b/arch/arm/boot/dts/sama5d3_mci2.dtsi new file mode 100644 index 00000000000..38e88e39e55 --- /dev/null +++ b/arch/arm/boot/dts/sama5d3_mci2.dtsi @@ -0,0 +1,47 @@ +/* + * at91sama5d3_mci2.dtsi - Device Tree Include file for AT91SAM9x5 SoC with + * 3 MMC ports + * + * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> + * + * Licensed under GPLv2. + */ + +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + ahb { + apb { + pinctrl@fffff200 { + mmc2 { + pinctrl_mmc2_clk_cmd_dat0: mmc2_clk_cmd_dat0 { + atmel,pins = + <AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC15 periph A MCI2_CK, conflicts with PCK2 */ + AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PC10 periph A MCI2_CDA with pullup */ + AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PC11 periph A MCI2_DA0 with pullup */ + }; + pinctrl_mmc2_dat1_3: mmc2_dat1_3 { + atmel,pins = + <AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC12 periph A MCI2_DA1 with pullup, conflicts with TIOA1 */ + AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC13 periph A MCI2_DA2 with pullup, conflicts with TIOB1 */ + AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC14 periph A MCI2_DA3 with pullup, conflicts with TCLK1 */ + }; + }; + }; + + mmc2: mmc@f8004000 { + compatible = "atmel,hsmci"; + reg = <0xf8004000 0x600>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(1)>; + dma-names = "rxtx"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc2_clk_cmd_dat0 &pinctrl_mmc2_dat1_3>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/sama5d3_tcb1.dtsi b/arch/arm/boot/dts/sama5d3_tcb1.dtsi new file mode 100644 index 00000000000..5264bb4a699 --- /dev/null +++ b/arch/arm/boot/dts/sama5d3_tcb1.dtsi @@ -0,0 +1,27 @@ +/* + * at91sama5d3_tcb1.dtsi - Device Tree Include file for AT91SAM9x5 SoC with + * 2 TC blocks. + * + * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> + * + * Licensed under GPLv2. + */ + +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + aliases { + tcb1 = &tcb1; + }; + + ahb { + apb { + tcb1: timer@f8014000 { + compatible = "atmel,at91sam9x5-tcb"; + reg = <0xf8014000 0x100>; + interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/sama5d3_uart.dtsi b/arch/arm/boot/dts/sama5d3_uart.dtsi new file mode 100644 index 00000000000..98fcb2d5744 --- /dev/null +++ b/arch/arm/boot/dts/sama5d3_uart.dtsi @@ -0,0 +1,53 @@ +/* + * at91sama5d3_uart.dtsi - Device Tree Include file for AT91SAM9x5 SoC with + * UART support + * + * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> + * + * Licensed under GPLv2. + */ + +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + ahb { + apb { + pinctrl@fffff200 { + uart0 { + pinctrl_uart0: uart0-0 { + atmel,pins = + <AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC29 periph A, conflicts with PWMFI2, ISI_D8 */ + AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PC30 periph A with pullup, conflicts with ISI_PCK */ + }; + }; + + uart1 { + pinctrl_uart1: uart1-0 { + atmel,pins = + <AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA30 periph B, conflicts with TWD0, ISI_VSYNC */ + AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA31 periph B with pullup, conflicts with TWCK0, ISI_HSYNC */ + }; + }; + }; + + uart0: serial@f0024000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf0024000 0x200>; + interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + status = "disabled"; + }; + + uart1: serial@f8028000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf8028000 0x200>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/sama5d3xcm.dtsi index 31ed9e3bb64..726a0f35100 100644 --- a/arch/arm/boot/dts/sama5d3xcm.dtsi +++ b/arch/arm/boot/dts/sama5d3xcm.dtsi @@ -6,7 +6,6 @@ * * Licensed under GPLv2 or later. */ -#include "sama5d3.dtsi" / { compatible = "atmel,samad3xcm", "atmel,sama5d3", "atmel,sama5"; diff --git a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts index 212230629f2..8ee06dd8179 100644 --- a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts +++ b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts @@ -108,6 +108,7 @@ }; &i2c0 { + status = "okay"; as3711@40 { compatible = "ams,as3711"; reg = <0x40>; @@ -183,6 +184,7 @@ &i2c3 { pinctrl-0 = <&i2c3_pins>; pinctrl-names = "default"; + status = "okay"; }; &mmcif { diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi index 3955c7606a6..fcf26889a8a 100644 --- a/arch/arm/boot/dts/sh73a0.dtsi +++ b/arch/arm/boot/dts/sh73a0.dtsi @@ -135,6 +135,7 @@ 0 168 0x4 0 169 0x4 0 170 0x4>; + status = "disabled"; }; i2c1: i2c@e6822000 { @@ -147,6 +148,7 @@ 0 52 0x4 0 53 0x4 0 54 0x4>; + status = "disabled"; }; i2c2: i2c@e6824000 { @@ -159,6 +161,7 @@ 0 172 0x4 0 173 0x4 0 174 0x4>; + status = "disabled"; }; i2c3: i2c@e6826000 { @@ -171,6 +174,7 @@ 0 184 0x4 0 185 0x4 0 186 0x4>; + status = "disabled"; }; i2c4: i2c@e6828000 { @@ -183,6 +187,7 @@ 0 188 0x4 0 189 0x4 0 190 0x4>; + status = "disabled"; }; mmcif: mmcif@e6bd0000 { diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index e273fa993b8..6d09b8d42fd 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -147,7 +147,7 @@ reg = <0x58>; }; - cfg_s2f_usr0_clk: cfg_s2f_usr0_clk { + cfg_h2f_usr0_clk: cfg_h2f_usr0_clk { #clock-cells = <0>; compatible = "altr,socfpga-perip-clk"; clocks = <&main_pll>; @@ -198,7 +198,7 @@ reg = <0x98>; }; - s2f_usr1_clk: s2f_usr1_clk { + h2f_usr1_clk: h2f_usr1_clk { #clock-cells = <0>; compatible = "altr,socfpga-perip-clk"; clocks = <&periph_pll>; @@ -235,7 +235,7 @@ reg = <0xD0>; }; - s2f_usr2_clk: s2f_usr2_clk { + h2f_usr2_clk: h2f_usr2_clk { #clock-cells = <0>; compatible = "altr,socfpga-perip-clk"; clocks = <&sdram_pll>; @@ -243,197 +243,197 @@ }; }; - mpu_periph_clk: mpu_periph_clk { - #clock-cells = <0>; - compatible = "altr,socfpga-gate-clk"; - clocks = <&mpuclk>; - fixed-divider = <4>; + mpu_periph_clk: mpu_periph_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&mpuclk>; + fixed-divider = <4>; }; - mpu_l2_ram_clk: mpu_l2_ram_clk { - #clock-cells = <0>; - compatible = "altr,socfpga-gate-clk"; - clocks = <&mpuclk>; - fixed-divider = <2>; + mpu_l2_ram_clk: mpu_l2_ram_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&mpuclk>; + fixed-divider = <2>; }; - l4_main_clk: l4_main_clk { - #clock-cells = <0>; - compatible = "altr,socfpga-gate-clk"; - clocks = <&mainclk>; - clk-gate = <0x60 0>; + l4_main_clk: l4_main_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&mainclk>; + clk-gate = <0x60 0>; }; - l3_main_clk: l3_main_clk { - #clock-cells = <0>; - compatible = "altr,socfpga-gate-clk"; - clocks = <&mainclk>; + l3_main_clk: l3_main_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&mainclk>; }; - l3_mp_clk: l3_mp_clk { - #clock-cells = <0>; - compatible = "altr,socfpga-gate-clk"; - clocks = <&mainclk>; - div-reg = <0x64 0 2>; - clk-gate = <0x60 1>; + l3_mp_clk: l3_mp_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&mainclk>; + div-reg = <0x64 0 2>; + clk-gate = <0x60 1>; }; - l3_sp_clk: l3_sp_clk { - #clock-cells = <0>; - compatible = "altr,socfpga-gate-clk"; - clocks = <&mainclk>; - div-reg = <0x64 2 2>; - }; + l3_sp_clk: l3_sp_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&mainclk>; + div-reg = <0x64 2 2>; + }; - l4_mp_clk: l4_mp_clk { - #clock-cells = <0>; - compatible = "altr,socfpga-gate-clk"; - clocks = <&mainclk>, <&per_base_clk>; - div-reg = <0x64 4 3>; - clk-gate = <0x60 2>; + l4_mp_clk: l4_mp_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&mainclk>, <&per_base_clk>; + div-reg = <0x64 4 3>; + clk-gate = <0x60 2>; }; - l4_sp_clk: l4_sp_clk { - #clock-cells = <0>; - compatible = "altr,socfpga-gate-clk"; - clocks = <&mainclk>, <&per_base_clk>; - div-reg = <0x64 7 3>; - clk-gate = <0x60 3>; + l4_sp_clk: l4_sp_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&mainclk>, <&per_base_clk>; + div-reg = <0x64 7 3>; + clk-gate = <0x60 3>; }; - dbg_at_clk: dbg_at_clk { - #clock-cells = <0>; - compatible = "altr,socfpga-gate-clk"; - clocks = <&dbg_base_clk>; - div-reg = <0x68 0 2>; - clk-gate = <0x60 4>; + dbg_at_clk: dbg_at_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&dbg_base_clk>; + div-reg = <0x68 0 2>; + clk-gate = <0x60 4>; }; - dbg_clk: dbg_clk { - #clock-cells = <0>; - compatible = "altr,socfpga-gate-clk"; - clocks = <&dbg_base_clk>; - div-reg = <0x68 2 2>; - clk-gate = <0x60 5>; + dbg_clk: dbg_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&dbg_base_clk>; + div-reg = <0x68 2 2>; + clk-gate = <0x60 5>; }; - dbg_trace_clk: dbg_trace_clk { - #clock-cells = <0>; - compatible = "altr,socfpga-gate-clk"; - clocks = <&dbg_base_clk>; - div-reg = <0x6C 0 3>; - clk-gate = <0x60 6>; + dbg_trace_clk: dbg_trace_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&dbg_base_clk>; + div-reg = <0x6C 0 3>; + clk-gate = <0x60 6>; }; - dbg_timer_clk: dbg_timer_clk { - #clock-cells = <0>; - compatible = "altr,socfpga-gate-clk"; - clocks = <&dbg_base_clk>; - clk-gate = <0x60 7>; + dbg_timer_clk: dbg_timer_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&dbg_base_clk>; + clk-gate = <0x60 7>; }; - cfg_clk: cfg_clk { - #clock-cells = <0>; - compatible = "altr,socfpga-gate-clk"; - clocks = <&cfg_s2f_usr0_clk>; - clk-gate = <0x60 8>; + cfg_clk: cfg_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&cfg_h2f_usr0_clk>; + clk-gate = <0x60 8>; }; - s2f_user0_clk: s2f_user0_clk { - #clock-cells = <0>; - compatible = "altr,socfpga-gate-clk"; - clocks = <&cfg_s2f_usr0_clk>; - clk-gate = <0x60 9>; + h2f_user0_clk: h2f_user0_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&cfg_h2f_usr0_clk>; + clk-gate = <0x60 9>; }; - emac_0_clk: emac_0_clk { - #clock-cells = <0>; - compatible = "altr,socfpga-gate-clk"; - clocks = <&emac0_clk>; - clk-gate = <0xa0 0>; + emac_0_clk: emac_0_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&emac0_clk>; + clk-gate = <0xa0 0>; }; - emac_1_clk: emac_1_clk { - #clock-cells = <0>; - compatible = "altr,socfpga-gate-clk"; - clocks = <&emac1_clk>; - clk-gate = <0xa0 1>; + emac_1_clk: emac_1_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&emac1_clk>; + clk-gate = <0xa0 1>; }; - usb_mp_clk: usb_mp_clk { - #clock-cells = <0>; - compatible = "altr,socfpga-gate-clk"; - clocks = <&per_base_clk>; - clk-gate = <0xa0 2>; - div-reg = <0xa4 0 3>; + usb_mp_clk: usb_mp_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&per_base_clk>; + clk-gate = <0xa0 2>; + div-reg = <0xa4 0 3>; }; - spi_m_clk: spi_m_clk { - #clock-cells = <0>; - compatible = "altr,socfpga-gate-clk"; - clocks = <&per_base_clk>; - clk-gate = <0xa0 3>; - div-reg = <0xa4 3 3>; + spi_m_clk: spi_m_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&per_base_clk>; + clk-gate = <0xa0 3>; + div-reg = <0xa4 3 3>; }; - can0_clk: can0_clk { - #clock-cells = <0>; - compatible = "altr,socfpga-gate-clk"; - clocks = <&per_base_clk>; - clk-gate = <0xa0 4>; - div-reg = <0xa4 6 3>; + can0_clk: can0_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&per_base_clk>; + clk-gate = <0xa0 4>; + div-reg = <0xa4 6 3>; }; - can1_clk: can1_clk { - #clock-cells = <0>; - compatible = "altr,socfpga-gate-clk"; - clocks = <&per_base_clk>; - clk-gate = <0xa0 5>; - div-reg = <0xa4 9 3>; + can1_clk: can1_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&per_base_clk>; + clk-gate = <0xa0 5>; + div-reg = <0xa4 9 3>; }; - gpio_db_clk: gpio_db_clk { - #clock-cells = <0>; - compatible = "altr,socfpga-gate-clk"; - clocks = <&per_base_clk>; - clk-gate = <0xa0 6>; - div-reg = <0xa8 0 24>; + gpio_db_clk: gpio_db_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&per_base_clk>; + clk-gate = <0xa0 6>; + div-reg = <0xa8 0 24>; }; - s2f_user1_clk: s2f_user1_clk { - #clock-cells = <0>; - compatible = "altr,socfpga-gate-clk"; - clocks = <&s2f_usr1_clk>; - clk-gate = <0xa0 7>; + h2f_user1_clk: h2f_user1_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&h2f_usr1_clk>; + clk-gate = <0xa0 7>; }; - sdmmc_clk: sdmmc_clk { - #clock-cells = <0>; - compatible = "altr,socfpga-gate-clk"; - clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>; - clk-gate = <0xa0 8>; + sdmmc_clk: sdmmc_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>; + clk-gate = <0xa0 8>; }; - nand_x_clk: nand_x_clk { - #clock-cells = <0>; - compatible = "altr,socfpga-gate-clk"; - clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>; - clk-gate = <0xa0 9>; + nand_x_clk: nand_x_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>; + clk-gate = <0xa0 9>; }; - nand_clk: nand_clk { - #clock-cells = <0>; - compatible = "altr,socfpga-gate-clk"; - clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>; - clk-gate = <0xa0 10>; - fixed-divider = <4>; + nand_clk: nand_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>; + clk-gate = <0xa0 10>; + fixed-divider = <4>; }; - qspi_clk: qspi_clk { - #clock-cells = <0>; - compatible = "altr,socfpga-gate-clk"; - clocks = <&f2s_periph_ref_clk>, <&main_qspi_clk>, <&per_qspi_clk>; - clk-gate = <0xa0 11>; + qspi_clk: qspi_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&f2s_periph_ref_clk>, <&main_qspi_clk>, <&per_qspi_clk>; + clk-gate = <0xa0 11>; }; }; }; @@ -473,6 +473,7 @@ compatible = "arm,cortex-a9-twd-timer"; reg = <0xfffec600 0x100>; interrupts = <1 13 0xf04>; + clocks = <&mpu_periph_clk>; }; timer0: timer0@ffc08000 { @@ -516,9 +517,9 @@ }; rstmgr@ffd05000 { - compatible = "altr,rst-mgr"; - reg = <0xffd05000 0x1000>; - }; + compatible = "altr,rst-mgr"; + reg = <0xffd05000 0x1000>; + }; sysmgr@ffd08000 { compatible = "altr,sys-mgr"; diff --git a/arch/arm/boot/dts/socfpga_arria5.dtsi b/arch/arm/boot/dts/socfpga_arria5.dtsi new file mode 100644 index 00000000000..a85b4043f88 --- /dev/null +++ b/arch/arm/boot/dts/socfpga_arria5.dtsi @@ -0,0 +1,58 @@ +/* + * Copyright (C) 2013 Altera Corporation <www.altera.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +/dts-v1/; +/include/ "socfpga.dtsi" + +/ { + soc { + clkmgr@ffd04000 { + clocks { + osc1 { + clock-frequency = <25000000>; + }; + }; + }; + + serial0@ffc02000 { + clock-frequency = <100000000>; + }; + + serial1@ffc03000 { + clock-frequency = <100000000>; + }; + + sysmgr@ffd08000 { + cpu1-start-addr = <0xffd080c4>; + }; + + timer0@ffc08000 { + clock-frequency = <100000000>; + }; + + timer1@ffc09000 { + clock-frequency = <100000000>; + }; + + timer2@ffd00000 { + clock-frequency = <25000000>; + }; + + timer3@ffd01000 { + clock-frequency = <25000000>; + }; + }; +}; diff --git a/arch/mips/include/asm/mach-powertv/powertv-clock.h b/arch/arm/boot/dts/socfpga_arria5_socdk.dts index 6f3e9a0fcf8..5beffb2265f 100644 --- a/arch/mips/include/asm/mach-powertv/powertv-clock.h +++ b/arch/arm/boot/dts/socfpga_arria5_socdk.dts @@ -1,5 +1,5 @@ /* - * Copyright (C) 2009 Cisco Systems, Inc. + * Copyright (C) 2013 Altera Corporation <www.altera.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -12,18 +12,29 @@ * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ -/* - * Local definitions for the powertv PCI code + * along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#ifndef _POWERTV_PCI_POWERTV_PCI_H_ -#define _POWERTV_PCI_POWERTV_PCI_H_ -extern int asic_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin); -extern int asic_pcie_init(void); -extern int asic_pcie_init(void); +/include/ "socfpga_arria5.dtsi" + +/ { + model = "Altera SOCFPGA Arria V SoC Development Kit"; + compatible = "altr,socfpga-arria5", "altr,socfpga"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory { + name = "memory"; + device_type = "memory"; + reg = <0x0 0x40000000>; /* 1GB */ + }; -extern int log_level; -#endif + aliases { + /* this allow the ethaddr uboot environmnet variable contents + * to be added to the gmac1 device tree blob. + */ + ethernet0 = &gmac1; + }; +}; diff --git a/arch/arm/boot/dts/socfpga_cyclone5.dts b/arch/arm/boot/dts/socfpga_cyclone5.dtsi index 973999d2c69..a8716f6dbe2 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5.dtsi @@ -19,26 +19,6 @@ /include/ "socfpga.dtsi" / { - model = "Altera SOCFPGA Cyclone V"; - compatible = "altr,socfpga-cyclone5", "altr,socfpga"; - - chosen { - bootargs = "console=ttyS0,57600"; - }; - - memory { - name = "memory"; - device_type = "memory"; - reg = <0x0 0x40000000>; /* 1GB */ - }; - - aliases { - /* this allow the ethaddr uboot environmnet variable contents - * to be added to the gmac1 device tree blob. - */ - ethernet0 = &gmac1; - }; - soc { clkmgr@ffd04000 { clocks { diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts new file mode 100644 index 00000000000..2ee52ab8cab --- /dev/null +++ b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts @@ -0,0 +1,40 @@ +/* + * Copyright (C) 2012 Altera Corporation <www.altera.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +/include/ "socfpga_cyclone5.dtsi" + +/ { + model = "Altera SOCFPGA Cyclone V SoC Development Kit"; + compatible = "altr,socfpga-cyclone5", "altr,socfpga"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory { + name = "memory"; + device_type = "memory"; + reg = <0x0 0x40000000>; /* 1GB */ + }; + + aliases { + /* this allow the ethaddr uboot environmnet variable contents + * to be added to the gmac1 device tree blob. + */ + ethernet0 = &gmac1; + }; +}; diff --git a/arch/mips/include/asm/mach-powertv/irq.h b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts index 4bd5d0c61a9..50b99a2c12a 100644 --- a/arch/mips/include/asm/mach-powertv/irq.h +++ b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts @@ -1,5 +1,5 @@ /* - * Copyright (C) 2009 Cisco Systems, Inc. + * Copyright (C) 2013 Steffen Trumtrar <s.trumtrar@pengutronix.de> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -12,14 +12,26 @@ * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#ifndef _ASM_MACH_POWERTV_IRQ_H -#define _ASM_MACH_POWERTV_IRQ_H -#include <asm/mach-powertv/interrupts.h> +/include/ "socfpga_cyclone5.dtsi" -#define MIPS_CPU_IRQ_BASE ibase -#define NR_IRQS 127 -#endif +/ { + model = "Terasic SoCkit"; + compatible = "altr,socfpga-cyclone5", "altr,socfpga"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory { + name = "memory"; + device_type = "memory"; + reg = <0x0 0x40000000>; /* 1GB */ + }; +}; + +&gmac1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi index 1c1091eedad..7da99fe497e 100644 --- a/arch/arm/boot/dts/ste-dbx5x0.dtsi +++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi @@ -10,6 +10,7 @@ */ #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/mfd/dbx500-prcmu.h> #include "skeleton.dtsi" / { @@ -42,16 +43,56 @@ interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>; }; + + clocks { + compatible = "stericsson,u8500-clks"; + + prcmu_clk: prcmu-clock { + #clock-cells = <1>; + }; + + prcc_pclk: prcc-periph-clock { + #clock-cells = <2>; + }; + + prcc_kclk: prcc-kernel-clock { + #clock-cells = <2>; + }; + + rtc_clk: rtc32k-clock { + #clock-cells = <0>; + }; + + smp_twd_clk: smp-twd-clock { + #clock-cells = <0>; + }; + }; + + mtu@a03c6000 { + /* Nomadik System Timer */ + compatible = "st,nomadik-mtu"; + reg = <0xa03c6000 0x1000>; + interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&prcmu_clk PRCMU_TIMCLK>, <&prcc_pclk 6 6>; + clock-names = "timclk", "apb_pclk"; + }; + timer@a0410600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0xa0410600 0x20>; interrupts = <1 13 0x304>; /* IRQ level high per-CPU */ + + clocks = <&smp_twd_clk>; }; rtc@80154000 { compatible = "arm,rtc-pl031", "arm,primecell"; reg = <0x80154000 0x1000>; interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&rtc_clk>; + clock-names = "apb_pclk"; }; gpio0: gpio@8012e000 { @@ -65,6 +106,8 @@ gpio-controller; #gpio-cells = <2>; gpio-bank = <0>; + + clocks = <&prcc_pclk 1 9>; }; gpio1: gpio@8012e080 { @@ -78,6 +121,8 @@ gpio-controller; #gpio-cells = <2>; gpio-bank = <1>; + + clocks = <&prcc_pclk 1 9>; }; gpio2: gpio@8000e000 { @@ -91,6 +136,8 @@ gpio-controller; #gpio-cells = <2>; gpio-bank = <2>; + + clocks = <&prcc_pclk 3 8>; }; gpio3: gpio@8000e080 { @@ -104,6 +151,8 @@ gpio-controller; #gpio-cells = <2>; gpio-bank = <3>; + + clocks = <&prcc_pclk 3 8>; }; gpio4: gpio@8000e100 { @@ -117,6 +166,8 @@ gpio-controller; #gpio-cells = <2>; gpio-bank = <4>; + + clocks = <&prcc_pclk 3 8>; }; gpio5: gpio@8000e180 { @@ -130,6 +181,8 @@ gpio-controller; #gpio-cells = <2>; gpio-bank = <5>; + + clocks = <&prcc_pclk 3 8>; }; gpio6: gpio@8011e000 { @@ -143,6 +196,8 @@ gpio-controller; #gpio-cells = <2>; gpio-bank = <6>; + + clocks = <&prcc_pclk 2 11>; }; gpio7: gpio@8011e080 { @@ -156,6 +211,8 @@ gpio-controller; #gpio-cells = <2>; gpio-bank = <7>; + + clocks = <&prcc_pclk 2 11>; }; gpio8: gpio@a03fe000 { @@ -169,6 +226,8 @@ gpio-controller; #gpio-cells = <2>; gpio-bank = <8>; + + clocks = <&prcc_pclk 5 1>; }; pinctrl { @@ -177,8 +236,7 @@ }; usb_per5@a03e0000 { - compatible = "stericsson,db8500-musb", - "mentor,musb"; + compatible = "stericsson,db8500-musb"; reg = <0xa03e0000 0x10000>; interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "mc"; @@ -210,6 +268,8 @@ "iep_6_14", "oep_6_14", "iep_7_15", "oep_7_15", "iep_8", "oep_8"; + + clocks = <&prcc_pclk 5 0>; }; dma: dma-controller@801C0000 { @@ -220,6 +280,8 @@ #dma-cells = <3>; memcpy-channels = <56 57 58 59 60>; + + clocks = <&prcmu_clk PRCMU_DMACLK>; }; prcmu: prcmu@80157000 { @@ -238,6 +300,13 @@ reg = <0x80157450 0xC>; }; + cpufreq { + compatible = "stericsson,cpufreq-ux500"; + clocks = <&prcmu_clk PRCMU_ARMSS>; + clock-names = "armss"; + status = "disabled"; + }; + thermal@801573c0 { compatible = "stericsson,db8500-thermal"; reg = <0x801573c0 0x40>; @@ -559,65 +628,74 @@ compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x80004000 0x1000>; interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>; - arm,primecell-periphid = <0x180024>; #address-cells = <1>; #size-cells = <0>; v-i2c-supply = <&db8500_vape_reg>; clock-frequency = <400000>; + clocks = <&prcc_kclk 3 3>, <&prcc_pclk 3 3>; + clock-names = "i2cclk", "apb_pclk"; }; i2c@80122000 { compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x80122000 0x1000>; interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>; - arm,primecell-periphid = <0x180024>; #address-cells = <1>; #size-cells = <0>; v-i2c-supply = <&db8500_vape_reg>; clock-frequency = <400000>; + + clocks = <&prcc_kclk 1 2>, <&prcc_pclk 1 2>; + clock-names = "i2cclk", "apb_pclk"; }; i2c@80128000 { compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x80128000 0x1000>; interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>; - arm,primecell-periphid = <0x180024>; #address-cells = <1>; #size-cells = <0>; v-i2c-supply = <&db8500_vape_reg>; clock-frequency = <400000>; + + clocks = <&prcc_kclk 1 6>, <&prcc_pclk 1 6>; + clock-names = "i2cclk", "apb_pclk"; }; i2c@80110000 { compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x80110000 0x1000>; interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>; - arm,primecell-periphid = <0x180024>; #address-cells = <1>; #size-cells = <0>; v-i2c-supply = <&db8500_vape_reg>; clock-frequency = <400000>; + + clocks = <&prcc_kclk 2 0>, <&prcc_pclk 2 0>; + clock-names = "i2cclk", "apb_pclk"; }; i2c@8012a000 { compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x8012a000 0x1000>; interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>; - arm,primecell-periphid = <0x180024>; #address-cells = <1>; #size-cells = <0>; v-i2c-supply = <&db8500_vape_reg>; clock-frequency = <400000>; + + clocks = <&prcc_kclk 1 9>, <&prcc_pclk 1 10>; + clock-names = "i2cclk", "apb_pclk"; }; ssp@80002000 { @@ -626,7 +704,80 @@ interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - status = "disabled"; + clocks = <&prcc_kclk 3 1>, <&prcc_pclk 3 1>; + clock-names = "ssp0clk", "apb_pclk"; + dmas = <&dma 8 0 0x2>, /* Logical - DevToMem */ + <&dma 8 0 0x0>; /* Logical - MemToDev */ + dma-names = "rx", "tx"; + }; + + ssp@80003000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x80003000 0x1000>; + interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&prcc_kclk 3 2>, <&prcc_pclk 3 2>; + clock-names = "ssp1clk", "apb_pclk"; + dmas = <&dma 9 0 0x2>, /* Logical - DevToMem */ + <&dma 9 0 0x0>; /* Logical - MemToDev */ + dma-names = "rx", "tx"; + }; + + spi@8011a000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x8011a000 0x1000>; + interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + /* Same clock wired to kernel and pclk */ + clocks = <&prcc_pclk 2 8>, <&prcc_pclk 2 8>; + clock-names = "spi0clk", "apb_pclk"; + dmas = <&dma 0 0 0x2>, /* Logical - DevToMem */ + <&dma 0 0 0x0>; /* Logical - MemToDev */ + dma-names = "rx", "tx"; + }; + + spi@80112000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x80112000 0x1000>; + interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + /* Same clock wired to kernel and pclk */ + clocks = <&prcc_pclk 2 2>, <&prcc_pclk 2 2>; + clock-names = "spi1clk", "apb_pclk"; + dmas = <&dma 35 0 0x2>, /* Logical - DevToMem */ + <&dma 35 0 0x0>; /* Logical - MemToDev */ + dma-names = "rx", "tx"; + }; + + spi@80111000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x80111000 0x1000>; + interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + /* Same clock wired to kernel and pclk */ + clocks = <&prcc_pclk 2 1>, <&prcc_pclk 2 1>; + clock-names = "spi2clk", "apb_pclk"; + dmas = <&dma 33 0 0x2>, /* Logical - DevToMem */ + <&dma 33 0 0x0>; /* Logical - MemToDev */ + dma-names = "rx", "tx"; + }; + + spi@80129000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x80129000 0x1000>; + interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + /* Same clock wired to kernel and pclk */ + clocks = <&prcc_pclk 1 7>, <&prcc_pclk 1 7>; + clock-names = "spi3clk", "apb_pclk"; + dmas = <&dma 40 0 0x2>, /* Logical - DevToMem */ + <&dma 40 0 0x0>; /* Logical - MemToDev */ + dma-names = "rx", "tx"; }; uart@80120000 { @@ -638,6 +789,9 @@ <&dma 13 0 0x0>; /* Logical - MemToDev */ dma-names = "rx", "tx"; + clocks = <&prcc_kclk 1 0>, <&prcc_pclk 1 0>; + clock-names = "uart", "apb_pclk"; + status = "disabled"; }; @@ -650,6 +804,9 @@ <&dma 12 0 0x0>; /* Logical - MemToDev */ dma-names = "rx", "tx"; + clocks = <&prcc_kclk 1 1>, <&prcc_pclk 1 1>; + clock-names = "uart", "apb_pclk"; + status = "disabled"; }; @@ -662,6 +819,9 @@ <&dma 11 0 0x0>; /* Logical - MemToDev */ dma-names = "rx", "tx"; + clocks = <&prcc_kclk 3 6>, <&prcc_pclk 3 6>; + clock-names = "uart", "apb_pclk"; + status = "disabled"; }; @@ -674,6 +834,9 @@ <&dma 29 0 0x0>; /* Logical - MemToDev */ dma-names = "rx", "tx"; + clocks = <&prcc_kclk 1 5>, <&prcc_pclk 1 5>; + clock-names = "sdi", "apb_pclk"; + status = "disabled"; }; @@ -686,6 +849,9 @@ <&dma 32 0 0x0>; /* Logical - MemToDev */ dma-names = "rx", "tx"; + clocks = <&prcc_kclk 2 4>, <&prcc_pclk 2 6>; + clock-names = "sdi", "apb_pclk"; + status = "disabled"; }; @@ -698,6 +864,9 @@ <&dma 28 0 0x0>; /* Logical - MemToDev */ dma-names = "rx", "tx"; + clocks = <&prcc_kclk 3 4>, <&prcc_pclk 3 4>; + clock-names = "sdi", "apb_pclk"; + status = "disabled"; }; @@ -705,6 +874,10 @@ compatible = "arm,pl18x", "arm,primecell"; reg = <0x80119000 0x1000>; interrupts = <0 59 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&prcc_kclk 2 5>, <&prcc_pclk 2 7>; + clock-names = "sdi", "apb_pclk"; + status = "disabled"; }; @@ -717,6 +890,9 @@ <&dma 42 0 0x0>; /* Logical - MemToDev */ dma-names = "rx", "tx"; + clocks = <&prcc_kclk 2 2>, <&prcc_pclk 2 4>; + clock-names = "sdi", "apb_pclk"; + status = "disabled"; }; @@ -724,6 +900,10 @@ compatible = "arm,pl18x", "arm,primecell"; reg = <0x80008000 0x1000>; interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&prcc_kclk 3 7>, <&prcc_pclk 3 7>; + clock-names = "sdi", "apb_pclk"; + status = "disabled"; }; @@ -732,6 +912,10 @@ reg = <0x80123000 0x1000>; interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>; v-ape-supply = <&db8500_vape_reg>; + + clocks = <&prcc_kclk 1 3>, <&prcc_pclk 1 3>; + clock-names = "msp", "apb_pclk"; + status = "disabled"; }; @@ -740,6 +924,10 @@ reg = <0x80124000 0x1000>; interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>; v-ape-supply = <&db8500_vape_reg>; + + clocks = <&prcc_kclk 1 4>, <&prcc_pclk 1 4>; + clock-names = "msp", "apb_pclk"; + status = "disabled"; }; @@ -749,6 +937,10 @@ reg = <0x80117000 0x1000>; interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>; v-ape-supply = <&db8500_vape_reg>; + + clocks = <&prcc_kclk 2 3>, <&prcc_pclk 2 5>; + clock-names = "msp", "apb_pclk"; + status = "disabled"; }; @@ -757,6 +949,10 @@ reg = <0x80125000 0x1000>; interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>; v-ape-supply = <&db8500_vape_reg>; + + clocks = <&prcc_kclk 1 10>, <&prcc_pclk 1 11>; + clock-names = "msp", "apb_pclk"; + status = "disabled"; }; @@ -772,7 +968,7 @@ cpufreq-cooling { compatible = "stericsson,db8500-cpufreq-cooling"; status = "disabled"; - }; + }; vmmci: regulator-gpio { compatible = "regulator-gpio"; @@ -797,6 +993,7 @@ interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>; v-ape-supply = <&db8500_vape_reg>; + clocks = <&prcc_pclk 6 1>; }; hash@a03c2000 { @@ -804,6 +1001,7 @@ reg = <0xa03c2000 0x1000>; v-ape-supply = <&db8500_vape_reg>; + clocks = <&prcc_pclk 6 2>; }; }; }; diff --git a/arch/arm/boot/dts/ste-stuib.dtsi b/arch/arm/boot/dts/ste-href-stuib.dtsi index 524e33240ad..76704ec0ffc 100644 --- a/arch/arm/boot/dts/ste-stuib.dtsi +++ b/arch/arm/boot/dts/ste-href-stuib.dtsi @@ -57,7 +57,6 @@ bu21013_tp@5c { compatible = "rohm,bu21013_tp"; reg = <0x5c>; - touch-gpio = <&gpio2 20 0x4>; avdd-supply = <&ab8500_ldo_aux1_reg>; rohm,touch-max-x = <384>; @@ -68,7 +67,6 @@ bu21013_tp@5d { compatible = "rohm,bu21013_tp"; reg = <0x5d>; - touch-gpio = <&gpio2 20 0x4>; avdd-supply = <&ab8500_ldo_aux1_reg>; rohm,touch-max-x = <384>; diff --git a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi new file mode 100644 index 00000000000..76d3ef13175 --- /dev/null +++ b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi @@ -0,0 +1,41 @@ +/* + * Copyright 2012 ST-Ericsson AB + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + * + * Device Tree for the TVK1281618 UIB + */ + +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + soc { + /* Add Synaptics touch screen, TC35892 keypad etc here */ + i2c@80004000 { + tc3589x@44 { + compatible = "tc3589x"; + reg = <0x44>; + interrupt-parent = <&gpio6>; + interrupts = <26 IRQ_TYPE_EDGE_RISING>; + + interrupt-controller; + #interrupt-cells = <2>; + + tc3589x_gpio { + compatible = "tc3589x-gpio"; + interrupts = <0 IRQ_TYPE_EDGE_RISING>; + + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi index 370e03f5e7b..aa3f02060fd 100644 --- a/arch/arm/boot/dts/ste-href.dtsi +++ b/arch/arm/boot/dts/ste-href.dtsi @@ -41,28 +41,6 @@ status = "okay"; }; - i2c@80004000 { - tc3589x@42 { - compatible = "tc3589x"; - reg = <0x42>; - interrupt-parent = <&gpio6>; - interrupts = <25 IRQ_TYPE_EDGE_RISING>; - - interrupt-controller; - #interrupt-cells = <2>; - - tc3589x_gpio: tc3589x_gpio { - compatible = "tc3589x-gpio"; - interrupts = <0 IRQ_TYPE_EDGE_RISING>; - - interrupt-controller; - #interrupt-cells = <2>; - gpio-controller; - #gpio-cells = <2>; - }; - }; - }; - i2c@80128000 { lp5521@33 { compatible = "national,lp5521"; @@ -72,6 +50,7 @@ chan0 { led-cur = /bits/ 8 <0x2f>; max-cur = /bits/ 8 <0x5f>; + linux,default-trigger = "heartbeat"; }; chan1 { led-cur = /bits/ 8 <0x2f>; @@ -102,7 +81,7 @@ }; bh1780@29 { compatible = "rohm,bh1780gli"; - reg = <0x33>; + reg = <0x29>; }; }; @@ -167,89 +146,11 @@ }; prcmu@80157000 { - db8500-prcmu-regulators { - db8500_vape_reg: db8500_vape { - regulator-name = "db8500-vape"; - }; - - db8500_varm_reg: db8500_varm { - regulator-name = "db8500-varm"; - }; - - db8500_vmodem_reg: db8500_vmodem { - regulator-name = "db8500-vmodem"; - }; - - db8500_vpll_reg: db8500_vpll { - regulator-name = "db8500-vpll"; - }; - - db8500_vsmps1_reg: db8500_vsmps1 { - regulator-name = "db8500-vsmps1"; - }; - - db8500_vsmps2_reg: db8500_vsmps2 { - regulator-name = "db8500-vsmps2"; - }; - - db8500_vsmps3_reg: db8500_vsmps3 { - regulator-name = "db8500-vsmps3"; - }; - - db8500_vrf1_reg: db8500_vrf1 { - regulator-name = "db8500-vrf1"; - }; - - db8500_sva_mmdsp_reg: db8500_sva_mmdsp { - regulator-name = "db8500-sva-mmdsp"; - }; - - db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret { - regulator-name = "db8500-sva-mmdsp-ret"; - }; - - db8500_sva_pipe_reg: db8500_sva_pipe { - regulator-name = "db8500_sva_pipe"; - }; - - db8500_sia_mmdsp_reg: db8500_sia_mmdsp { - regulator-name = "db8500_sia_mmdsp"; - }; - - db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret { - regulator-name = "db8500-sia-mmdsp-ret"; - }; - - db8500_sia_pipe_reg: db8500_sia_pipe { - regulator-name = "db8500-sia-pipe"; - }; - - db8500_sga_reg: db8500_sga { - regulator-name = "db8500-sga"; - }; - - db8500_b2r2_mcde_reg: db8500_b2r2_mcde { - regulator-name = "db8500-b2r2-mcde"; - }; - - db8500_esram12_reg: db8500_esram12 { - regulator-name = "db8500-esram12"; - }; - - db8500_esram12_ret_reg: db8500_esram12_ret { - regulator-name = "db8500-esram12-ret"; - }; - - db8500_esram34_reg: db8500_esram34 { - regulator-name = "db8500-esram34"; + ab8500 { + ab8500-gpio { + compatible = "stericsson,ab8500-gpio"; }; - db8500_esram34_ret_reg: db8500_esram34_ret { - regulator-name = "db8500-esram34-ret"; - }; - }; - - ab8500 { ab8500-regulators { ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { regulator-name = "V-DISPLAY"; diff --git a/arch/arm/boot/dts/ste-hrefprev60-stuib.dts b/arch/arm/boot/dts/ste-hrefprev60-stuib.dts new file mode 100644 index 00000000000..2b1cb5b584b --- /dev/null +++ b/arch/arm/boot/dts/ste-hrefprev60-stuib.dts @@ -0,0 +1,34 @@ +/* + * Copyright 2012 ST-Ericsson AB + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "ste-hrefprev60.dtsi" +#include "ste-href-stuib.dtsi" + +/ { + model = "ST-Ericsson HREF (pre-v60) and ST UIB"; + compatible = "st-ericsson,mop500", "st-ericsson,u8500"; + + soc { + /* Reset line for the BU21013 touchscreen */ + i2c@80110000 { + /* Only one of these will be used */ + bu21013_tp@5c { + touch-gpio = <&gpio2 12 0x4>; + reset-gpio = <&tc3589x_gpio 13 0x4>; + }; + bu21013_tp@5d { + touch-gpio = <&gpio2 12 0x4>; + reset-gpio = <&tc3589x_gpio 13 0x4>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/ste-hrefprev60-tvk.dts b/arch/arm/boot/dts/ste-hrefprev60-tvk.dts new file mode 100644 index 00000000000..59523f86681 --- /dev/null +++ b/arch/arm/boot/dts/ste-hrefprev60-tvk.dts @@ -0,0 +1,19 @@ +/* + * Copyright 2012 ST-Ericsson AB + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "ste-hrefprev60.dtsi" +#include "ste-href-tvk1281618.dtsi" + +/ { + model = "ST-Ericsson HREF (pre-v60) and TVK1281618 UIB"; + compatible = "st-ericsson,mop500", "st-ericsson,u8500"; +}; diff --git a/arch/arm/boot/dts/ste-hrefprev60.dts b/arch/arm/boot/dts/ste-hrefprev60.dtsi index d8d3b99ab00..b2cd7bc2752 100644 --- a/arch/arm/boot/dts/ste-hrefprev60.dts +++ b/arch/arm/boot/dts/ste-hrefprev60.dtsi @@ -7,17 +7,14 @@ * * http://www.opensource.org/licenses/gpl-license.html * http://www.gnu.org/copyleft/gpl.html + * + * Device Tree for the HREF+ prior to the v60 variant. */ -/dts-v1/; #include "ste-dbx5x0.dtsi" #include "ste-href.dtsi" -#include "ste-stuib.dtsi" / { - model = "ST-Ericsson HREF (pre-v60) platform with Device Tree"; - compatible = "st-ericsson,mop500", "st-ericsson,u8500"; - gpio_keys { button@1 { gpios = <&tc3589x_gpio 7 0x4>; @@ -25,24 +22,30 @@ }; soc { - prcmu@80157000 { - ab8500@5 { - ab8500-gpio { - compatible = "stericsson,ab8500-gpio"; - }; - }; - }; - i2c@80004000 { tps61052@33 { compatible = "tps61052"; reg = <0x33>; }; - }; - i2c@80110000 { - bu21013_tp@5c { - reset-gpio = <&tc3589x_gpio 13 0x4>; + tc3589x@42 { + compatible = "tc3589x"; + reg = <0x42>; + interrupt-parent = <&gpio6>; + interrupts = <25 IRQ_TYPE_EDGE_RISING>; + + interrupt-controller; + #interrupt-cells = <2>; + + tc3589x_gpio: tc3589x_gpio { + compatible = "tc3589x-gpio"; + interrupts = <0 IRQ_TYPE_EDGE_RISING>; + + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + }; }; }; diff --git a/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts b/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts new file mode 100644 index 00000000000..8c6a2de56cf --- /dev/null +++ b/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts @@ -0,0 +1,36 @@ +/* + * Copyright 2012 ST-Ericsson AB + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + * + * Device Tree for the HREF version 60 or later with the ST UIB + */ + +/dts-v1/; +#include "ste-hrefv60plus.dtsi" +#include "ste-href-stuib.dtsi" + +/ { + model = "ST-Ericsson HREF (v60+) and ST UIB"; + compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500"; + + soc { + /* Reset line for the BU21013 touchscreen */ + i2c@80110000 { + /* Only one of these will be used */ + bu21013_tp@5c { + touch-gpio = <&gpio2 20 0x4>; + reset-gpio = <&gpio4 17 0x4>; + }; + bu21013_tp@5d { + touch-gpio = <&gpio2 20 0x4>; + reset-gpio = <&gpio4 17 0x4>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts b/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts new file mode 100644 index 00000000000..d53cccdce77 --- /dev/null +++ b/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts @@ -0,0 +1,21 @@ +/* + * Copyright 2012 ST-Ericsson AB + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + * + * Device Tree for the HREF version 60 or later with the TVK1281618 UIB + */ + +/dts-v1/; +#include "ste-hrefv60plus.dtsi" +#include "ste-href-tvk1281618.dtsi" + +/ { + model = "ST-Ericsson HREF (v60+) and TVK1281618 UIB"; + compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500"; +}; diff --git a/arch/arm/boot/dts/ste-hrefv60plus.dts b/arch/arm/boot/dts/ste-hrefv60plus.dts deleted file mode 100644 index 6e52ebbf113..00000000000 --- a/arch/arm/boot/dts/ste-hrefv60plus.dts +++ /dev/null @@ -1,210 +0,0 @@ -/* - * Copyright 2012 ST-Ericsson AB - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -/dts-v1/; -#include "ste-dbx5x0.dtsi" -#include "ste-href.dtsi" -#include "ste-stuib.dtsi" - -/ { - model = "ST-Ericsson HREF (v60+) platform with Device Tree"; - compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500"; - - gpio_keys { - button@1 { - gpios = <&gpio6 25 0x4>; - }; - }; - - soc { - i2c@80110000 { - bu21013_tp@0x5c { - reset-gpio = <&gpio4 15 0x4>; - }; - }; - - // External Micro SD slot - sdi0_per1@80126000 { - arm,primecell-periphid = <0x10480180>; - max-frequency = <100000000>; - bus-width = <4>; - mmc-cap-sd-highspeed; - mmc-cap-mmc-highspeed; - vmmc-supply = <&ab8500_ldo_aux3_reg>; - - cd-gpios = <&tc3589x_gpio 3 0x4>; - - status = "okay"; - }; - - // WLAN SDIO channel - sdi1_per2@80118000 { - arm,primecell-periphid = <0x10480180>; - max-frequency = <100000000>; - bus-width = <4>; - - status = "okay"; - }; - - // PoP:ed eMMC - sdi2_per3@80005000 { - arm,primecell-periphid = <0x10480180>; - max-frequency = <100000000>; - bus-width = <8>; - mmc-cap-mmc-highspeed; - - status = "okay"; - }; - - // On-board eMMC - sdi4_per2@80114000 { - arm,primecell-periphid = <0x10480180>; - max-frequency = <100000000>; - bus-width = <8>; - mmc-cap-mmc-highspeed; - vmmc-supply = <&ab8500_ldo_aux2_reg>; - - status = "okay"; - }; - - prcmu@80157000 { - db8500-prcmu-regulators { - db8500_vape_reg: db8500_vape { - regulator-name = "db8500-vape"; - }; - - db8500_varm_reg: db8500_varm { - regulator-name = "db8500-varm"; - }; - - db8500_vmodem_reg: db8500_vmodem { - regulator-name = "db8500-vmodem"; - }; - - db8500_vpll_reg: db8500_vpll { - regulator-name = "db8500-vpll"; - }; - - db8500_vsmps1_reg: db8500_vsmps1 { - regulator-name = "db8500-vsmps1"; - }; - - db8500_vsmps2_reg: db8500_vsmps2 { - regulator-name = "db8500-vsmps2"; - }; - - db8500_vsmps3_reg: db8500_vsmps3 { - regulator-name = "db8500-vsmps3"; - }; - - db8500_vrf1_reg: db8500_vrf1 { - regulator-name = "db8500-vrf1"; - }; - - db8500_sva_mmdsp_reg: db8500_sva_mmdsp { - regulator-name = "db8500-sva-mmdsp"; - }; - - db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret { - regulator-name = "db8500-sva-mmdsp-ret"; - }; - - db8500_sva_pipe_reg: db8500_sva_pipe { - regulator-name = "db8500_sva_pipe"; - }; - - db8500_sia_mmdsp_reg: db8500_sia_mmdsp { - regulator-name = "db8500_sia_mmdsp"; - }; - - db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret { - regulator-name = "db8500-sia-mmdsp-ret"; - }; - - db8500_sia_pipe_reg: db8500_sia_pipe { - regulator-name = "db8500-sia-pipe"; - }; - - db8500_sga_reg: db8500_sga { - regulator-name = "db8500-sga"; - }; - - db8500_b2r2_mcde_reg: db8500_b2r2_mcde { - regulator-name = "db8500-b2r2-mcde"; - }; - - db8500_esram12_reg: db8500_esram12 { - regulator-name = "db8500-esram12"; - }; - - db8500_esram12_ret_reg: db8500_esram12_ret { - regulator-name = "db8500-esram12-ret"; - }; - - db8500_esram34_reg: db8500_esram34 { - regulator-name = "db8500-esram34"; - }; - - db8500_esram34_ret_reg: db8500_esram34_ret { - regulator-name = "db8500-esram34-ret"; - }; - }; - - ab8500 { - ab8500-regulators { - ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { - regulator-name = "V-DISPLAY"; - }; - - ab8500_ldo_aux2_reg: ab8500_ldo_aux2 { - regulator-name = "V-eMMC1"; - }; - - ab8500_ldo_aux3_reg: ab8500_ldo_aux3 { - regulator-name = "V-MMC-SD"; - }; - - ab8500_ldo_intcore_reg: ab8500_ldo_intcore { - regulator-name = "V-INTCORE"; - }; - - ab8500_ldo_tvout_reg: ab8500_ldo_tvout { - regulator-name = "V-TVOUT"; - }; - - ab8500_ldo_usb_reg: ab8500_ldo_usb { - regulator-name = "dummy"; - }; - - ab8500_ldo_audio_reg: ab8500_ldo_audio { - regulator-name = "V-AUD"; - }; - - ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 { - regulator-name = "V-AMIC1"; - }; - - ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 { - regulator-name = "V-AMIC2"; - }; - - ab8500_ldo_dmic_reg: ab8500_ldo_dmic { - regulator-name = "V-DMIC"; - }; - - ab8500_ldo_ana_reg: ab8500_ldo_ana { - regulator-name = "V-CSI/DSI"; - }; - }; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/ste-hrefv60plus.dtsi b/arch/arm/boot/dts/ste-hrefv60plus.dtsi new file mode 100644 index 00000000000..aed511b47a9 --- /dev/null +++ b/arch/arm/boot/dts/ste-hrefv60plus.dtsi @@ -0,0 +1,70 @@ +/* + * Copyright 2012 ST-Ericsson AB + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include "ste-dbx5x0.dtsi" +#include "ste-href.dtsi" + +/ { + model = "ST-Ericsson HREF (v60+) platform with Device Tree"; + compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500"; + + gpio_keys { + button@1 { + gpios = <&gpio5 25 0x4>; + }; + }; + + soc { + // External Micro SD slot + sdi0_per1@80126000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <100000000>; + bus-width = <4>; + mmc-cap-sd-highspeed; + mmc-cap-mmc-highspeed; + vmmc-supply = <&ab8500_ldo_aux3_reg>; + + cd-gpios = <&gpio2 31 0x4>; // 95 + + status = "okay"; + }; + + // WLAN SDIO channel + sdi1_per2@80118000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <100000000>; + bus-width = <4>; + + status = "okay"; + }; + + // PoP:ed eMMC + sdi2_per3@80005000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <100000000>; + bus-width = <8>; + mmc-cap-mmc-highspeed; + + status = "okay"; + }; + + // On-board eMMC + sdi4_per2@80114000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <100000000>; + bus-width = <8>; + mmc-cap-mmc-highspeed; + vmmc-supply = <&ab8500_ldo_aux2_reg>; + + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi index 9169d3025f3..79425e3836c 100644 --- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi +++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi @@ -653,6 +653,7 @@ reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd"; clocks = <&hclksmc>; status = "okay"; + timings = /bits/ 8 <0 0 0 0x10 0x0a 0>; partition@0 { label = "X-Loader(NAND)"; @@ -707,8 +708,14 @@ pinctrl-0 = <&i2c0_default_mux>, <&i2c0_default_mode>; stw4811@2d { - compatible = "st,stw4811"; - reg = <0x2d>; + compatible = "st,stw4811"; + reg = <0x2d>; + vmmc_regulator: vmmc { + compatible = "st,stw481x-vmmc"; + regulator-name = "VMMC"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; }; }; @@ -839,6 +846,7 @@ cd-inverted; pinctrl-names = "default"; pinctrl-0 = <&mmcsd_default_mux>, <&mmcsd_default_mode>; + vmmc-supply = <&vmmc_regulator>; }; }; }; diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts index f1fc128e249..f0b39f83591 100644 --- a/arch/arm/boot/dts/ste-snowball.dts +++ b/arch/arm/boot/dts/ste-snowball.dts @@ -111,12 +111,13 @@ vdd33a-supply = <&en_3v3_reg>; vddvario-supply = <&db8500_vape_reg>; - reg-shift = <1>; reg-io-width = <2>; smsc,force-internal-phy; smsc,irq-active-high; smsc,irq-push-pull; + + clocks = <&prcc_pclk 3 0>; }; }; @@ -170,86 +171,8 @@ }; prcmu@80157000 { - db8500-prcmu-regulators { - db8500_vape_reg: db8500_vape { - regulator-name = "db8500-vape"; - }; - - db8500_varm_reg: db8500_varm { - regulator-name = "db8500-varm"; - }; - - db8500_vmodem_reg: db8500_vmodem { - regulator-name = "db8500-vmodem"; - }; - - db8500_vpll_reg: db8500_vpll { - regulator-name = "db8500-vpll"; - }; - - db8500_vsmps1_reg: db8500_vsmps1 { - regulator-name = "db8500-vsmps1"; - }; - - db8500_vsmps2_reg: db8500_vsmps2 { - regulator-name = "db8500-vsmps2"; - }; - - db8500_vsmps3_reg: db8500_vsmps3 { - regulator-name = "db8500-vsmps3"; - }; - - db8500_vrf1_reg: db8500_vrf1 { - regulator-name = "db8500-vrf1"; - }; - - db8500_sva_mmdsp_reg: db8500_sva_mmdsp { - regulator-name = "db8500-sva-mmdsp"; - }; - - db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret { - regulator-name = "db8500-sva-mmdsp-ret"; - }; - - db8500_sva_pipe_reg: db8500_sva_pipe { - regulator-name = "db8500_sva_pipe"; - }; - - db8500_sia_mmdsp_reg: db8500_sia_mmdsp { - regulator-name = "db8500_sia_mmdsp"; - }; - - db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret { - regulator-name = "db8500-sia-mmdsp-ret"; - }; - - db8500_sia_pipe_reg: db8500_sia_pipe { - regulator-name = "db8500-sia-pipe"; - }; - - db8500_sga_reg: db8500_sga { - regulator-name = "db8500-sga"; - }; - - db8500_b2r2_mcde_reg: db8500_b2r2_mcde { - regulator-name = "db8500-b2r2-mcde"; - }; - - db8500_esram12_reg: db8500_esram12 { - regulator-name = "db8500-esram12"; - }; - - db8500_esram12_ret_reg: db8500_esram12_ret { - regulator-name = "db8500-esram12-ret"; - }; - - db8500_esram34_reg: db8500_esram34 { - regulator-name = "db8500-esram34"; - }; - - db8500_esram34_ret_reg: db8500_esram34_ret { - regulator-name = "db8500-esram34-ret"; - }; + cpufreq { + status = "okay"; }; thermal@801573c0 { diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index c32770a28ac..319cc6b509d 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -266,6 +266,11 @@ reg = <0x01c20c90 0x10>; }; + sid: eeprom@01c23800 { + compatible = "allwinner,sun4i-sid"; + reg = <0x01c23800 0x10>; + }; + uart0: serial@01c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi index 3b4a0574f06..52476742a10 100644 --- a/arch/arm/boot/dts/sun5i-a10s.dtsi +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi @@ -255,6 +255,11 @@ reg = <0x01c20c90 0x10>; }; + sid: eeprom@01c23800 { + compatible = "allwinner,sun4i-sid"; + reg = <0x01c23800 0x10>; + }; + uart0: serial@01c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index f6091dc0936..ce8ef2a45be 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -222,6 +222,11 @@ reg = <0x01c20c90 0x10>; }; + sid: eeprom@01c23800 { + compatible = "allwinner,sun4i-sid"; + reg = <0x01c23800 0x10>; + }; + uart1: serial@01c28400 { compatible = "snps,dw-apb-uart"; reg = <0x01c28400 0x400>; diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index f244f5f0236..c1751a64889 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -175,7 +175,7 @@ apb2_gates: apb2_gates@01c2006c { #clock-cells = <1>; compatible = "allwinner,sun6i-a31-apb2-gates-clk"; - reg = <0x01c2006c 0x8>; + reg = <0x01c2006c 0x4>; clocks = <&apb2>; clock-output-names = "apb2_i2c0", "apb2_i2c1", "apb2_i2c2", "apb2_i2c3", "apb2_uart0", diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts index 15e625eca31..5c51cb8a98b 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts @@ -48,6 +48,18 @@ pinctrl-0 = <&uart0_pins_a>; status = "okay"; }; + + i2c0: i2c@01c2ac00 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + }; + + i2c1: i2c@01c2b000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + }; }; leds { diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts new file mode 100644 index 00000000000..8a1009d6c82 --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts @@ -0,0 +1,63 @@ +/* + * Copyright 2013 Oliver Schinagl + * + * Oliver Schinagl <oliver@schinagl.nl> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "sun7i-a20.dtsi" + +/ { + model = "Cubietech Cubietruck"; + compatible = "cubietech,cubietruck", "allwinner,sun7i-a20"; + + soc@01c00000 { + pinctrl@01c20800 { + led_pins_cubietruck: led_pins@0 { + allwinner,pins = "PH7", "PH11", "PH20", "PH21"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + }; + + uart0: serial@01c28000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_cubietruck>; + + blue { + label = "cubietruck:blue:usr"; + gpios = <&pio 7 21 0>; + }; + + orange { + label = "cubietruck:orange:usr"; + gpios = <&pio 7 20 0>; + }; + + white { + label = "cubietruck:white:usr"; + gpios = <&pio 7 11 0>; + }; + + green { + label = "cubietruck:green:usr"; + gpios = <&pio 7 7 0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts index 9e778557fad..ead3013f9ac 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts @@ -60,6 +60,24 @@ pinctrl-0 = <&uart7_pins_a>; status = "okay"; }; + + i2c0: i2c@01c2ac00 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + }; + + i2c1: i2c@01c2b000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + }; + + i2c2: i2c@01c2b400 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; + }; }; leds { diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 80559cbdbc8..e46cfedde74 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -215,6 +215,27 @@ allwinner,pull = <0>; }; + i2c0_pins_a: i2c0@0 { + allwinner,pins = "PB0", "PB1"; + allwinner,function = "i2c0"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + i2c1_pins_a: i2c1@0 { + allwinner,pins = "PB18", "PB19"; + allwinner,function = "i2c1"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + i2c2_pins_a: i2c2@0 { + allwinner,pins = "PB20", "PB21"; + allwinner,function = "i2c2"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + emac_pins_a: emac0@0 { allwinner,pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", @@ -244,6 +265,11 @@ reg = <0x01c20c90 0x10>; }; + sid: eeprom@01c23800 { + compatible = "allwinner,sun7i-a20-sid"; + reg = <0x01c23800 0x200>; + }; + uart0: serial@01c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; @@ -324,6 +350,51 @@ status = "disabled"; }; + i2c0: i2c@01c2ac00 { + compatible = "allwinner,sun4i-i2c"; + reg = <0x01c2ac00 0x400>; + interrupts = <0 7 1>; + clocks = <&apb1_gates 0>; + clock-frequency = <100000>; + status = "disabled"; + }; + + i2c1: i2c@01c2b000 { + compatible = "allwinner,sun4i-i2c"; + reg = <0x01c2b000 0x400>; + interrupts = <0 8 1>; + clocks = <&apb1_gates 1>; + clock-frequency = <100000>; + status = "disabled"; + }; + + i2c2: i2c@01c2b400 { + compatible = "allwinner,sun4i-i2c"; + reg = <0x01c2b400 0x400>; + interrupts = <0 9 1>; + clocks = <&apb1_gates 2>; + clock-frequency = <100000>; + status = "disabled"; + }; + + i2c3: i2c@01c2b800 { + compatible = "allwinner,sun4i-i2c"; + reg = <0x01c2b800 0x400>; + interrupts = <0 88 1>; + clocks = <&apb1_gates 3>; + clock-frequency = <100000>; + status = "disabled"; + }; + + i2c4: i2c@01c2bc00 { + compatible = "allwinner,sun4i-i2c"; + reg = <0x01c2bc00 0x400>; + interrupts = <0 89 1>; + clocks = <&apb1_gates 15>; + clock-frequency = <100000>; + status = "disabled"; + }; + gic: interrupt-controller@01c81000 { compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; reg = <0x01c81000 0x1000>, diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts index 60230288884..cb5ec23b03a 100644 --- a/arch/arm/boot/dts/tegra114-dalmore.dts +++ b/arch/arm/boot/dts/tegra114-dalmore.dts @@ -1,5 +1,6 @@ /dts-v1/; +#include <dt-bindings/input/input.h> #include "tegra114.dtsi" / { @@ -738,6 +739,14 @@ realtek,ldo1-en-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>; }; + + temperature-sensor@4c { + compatible = "onnn,nct1008"; + reg = <0x4c>; + vcc-supply = <&palmas_ldo6_reg>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_LOW>; + }; }; i2c@7000d000 { @@ -947,7 +956,7 @@ regulator-max-microvolt = <1800000>; }; - ldo6 { + palmas_ldo6_reg: ldo6 { regulator-name = "vdd-sensor-2v85"; regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; @@ -1011,6 +1020,19 @@ interrupt-parent = <&palmas>; interrupts = <8 0>; }; + + pinmux { + compatible = "ti,tps65913-pinctrl"; + pinctrl-names = "default"; + pinctrl-0 = <&palmas_default>; + + palmas_default: pinmux { + pin_gpio6 { + pins = "gpio6"; + function = "gpio"; + }; + }; + }; }; }; @@ -1081,26 +1103,26 @@ home { label = "Home"; gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>; - linux,code = <102>; /* KEY_HOME */ + linux,code = <KEY_HOME>; }; power { label = "Power"; gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>; - linux,code = <116>; /* KEY_POWER */ + linux,code = <KEY_POWER>; gpio-key,wakeup; }; volume_down { label = "Volume Down"; gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>; - linux,code = <114>; /* KEY_VOLUMEDOWN */ + linux,code = <KEY_VOLUMEDOWN>; }; volume_up { label = "Volume Up"; gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>; - linux,code = <115>; /* KEY_VOLUMEUP */ + linux,code = <KEY_VOLUMEUP>; }; }; diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi index 2905145d8e5..8d42787c8ff 100644 --- a/arch/arm/boot/dts/tegra114.dtsi +++ b/arch/arm/boot/dts/tegra114.dtsi @@ -318,9 +318,9 @@ iommu { compatible = "nvidia,tegra114-smmu", "nvidia,tegra30-smmu"; - reg = <0x7000f010 0x02c - 0x7000f1f0 0x010 - 0x7000f228 0x074>; + reg = <0x70019010 0x02c + 0x700191f0 0x010 + 0x70019228 0x074>; nvidia,#asids = <4>; dma-window = <0 0x40000000>; nvidia,swgroups = <0x18659fe>; diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts new file mode 100644 index 00000000000..431d67a2b41 --- /dev/null +++ b/arch/arm/boot/dts/tegra124-venice2.dts @@ -0,0 +1,27 @@ +/dts-v1/; + +#include "tegra124.dtsi" + +/ { + model = "NVIDIA Tegra124 Venice2"; + compatible = "nvidia,venice2", "nvidia,tegra124"; + + memory { + reg = <0x80000000 0x80000000>; + }; + + serial@70006000 { + status = "okay"; + }; + + pmc@7000e400 { + nvidia,invert-interrupt; + nvidia,suspend-mode = <1>; + nvidia,cpu-pwr-good-time = <500>; + nvidia,cpu-pwr-off-time = <300>; + nvidia,core-pwr-good-time = <641 3845>; + nvidia,core-pwr-off-time = <61036>; + nvidia,core-power-req-active-high; + nvidia,sys-clock-req-active-high; + }; +}; diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi new file mode 100644 index 00000000000..b7413004ee7 --- /dev/null +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -0,0 +1,149 @@ +#include <dt-bindings/gpio/tegra-gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +#include "skeleton.dtsi" + +/ { + compatible = "nvidia,tegra124"; + interrupt-parent = <&gic>; + + gic: interrupt-controller@50041000 { + compatible = "arm,cortex-a15-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x50041000 0x1000>, + <0x50042000 0x1000>, + <0x50044000 0x2000>, + <0x50046000 0x2000>; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + timer@60005000 { + compatible = "nvidia,tegra124-timer", "nvidia,tegra20-timer"; + reg = <0x60005000 0x400>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; + }; + + gpio: gpio@6000d000 { + compatible = "nvidia,tegra124-gpio", "nvidia,tegra30-gpio"; + reg = <0x6000d000 0x1000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + }; + + /* + * There are two serial driver i.e. 8250 based simple serial + * driver and APB DMA based serial driver for higher baudrate + * and performace. To enable the 8250 based driver, the compatible + * is "nvidia,tegra124-uart", "nvidia,tegra20-uart" and to enable + * the APB DMA based serial driver, the comptible is + * "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart". + */ + serial@70006000 { + compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart"; + reg = <0x70006000 0x40>; + reg-shift = <2>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + serial@70006040 { + compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart"; + reg = <0x70006040 0x40>; + reg-shift = <2>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + serial@70006200 { + compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart"; + reg = <0x70006200 0x40>; + reg-shift = <2>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + serial@70006300 { + compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart"; + reg = <0x70006300 0x40>; + reg-shift = <2>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + serial@70006400 { + compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart"; + reg = <0x70006400 0x40>; + reg-shift = <2>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + rtc@7000e000 { + compatible = "nvidia,tegra124-rtc", "nvidia,tegra20-rtc"; + reg = <0x7000e000 0x100>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + }; + + pmc@7000e400 { + compatible = "nvidia,tegra124-pmc"; + reg = <0x7000e400 0x400>; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <1>; + }; + + cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <2>; + }; + + cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <3>; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi index e19dbf238e5..5ea7dfa4d9f 100644 --- a/arch/arm/boot/dts/tegra30-cardhu.dtsi +++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi @@ -294,9 +294,10 @@ }; }; - nct1008 { + temperature-sensor@4c { compatible = "onnn,nct1008"; reg = <0x4c>; + vcc-supply = <&sys_3v3_reg>; interrupt-parent = <&gpio>; interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_LEVEL_LOW>; }; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index 0022c127e1d..2bd55cfd88a 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -136,12 +136,13 @@ gr3d { compatible = "nvidia,tegra30-gr3d"; reg = <0x54180000 0x00040000>; - clocks = <&tegra_car 24 &tegra_car 98>; + clocks = <&tegra_car TEGRA30_CLK_GR3D + &tegra_car TEGRA30_CLK_GR3D2>; clock-names = "3d", "3d2"; }; dc@54200000 { - compatible = "nvidia,tegra30-dc"; + compatible = "nvidia,tegra30-dc", "nvidia,tegra20-dc"; reg = <0x54200000 0x00040000>; interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA30_CLK_DISP1>, diff --git a/arch/arm/boot/dts/twl4030.dtsi b/arch/arm/boot/dts/twl4030.dtsi index ae6a17aed9e..fb1b2ec8eaa 100644 --- a/arch/arm/boot/dts/twl4030.dtsi +++ b/arch/arm/boot/dts/twl4030.dtsi @@ -23,6 +23,22 @@ compatible = "ti,twl4030-wdt"; }; + vaux1: regulator-vaux1 { + compatible = "ti,twl4030-vaux1"; + }; + + vaux2: regulator-vaux2 { + compatible = "ti,twl4030-vaux2"; + }; + + vaux3: regulator-vaux3 { + compatible = "ti,twl4030-vaux3"; + }; + + vaux4: regulator-vaux4 { + compatible = "ti,twl4030-vaux4"; + }; + vcc: regulator-vdd1 { compatible = "ti,twl4030-vdd1"; regulator-min-microvolt = <600000>; @@ -35,10 +51,20 @@ regulator-max-microvolt = <1800000>; }; - vpll2: regulator-vpll2 { - compatible = "ti,twl4030-vpll2"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; + vio: regulator-vio { + compatible = "ti,twl4030-vio"; + }; + + vintana1: regulator-vintana1 { + compatible = "ti,twl4030-vintana1"; + }; + + vintana2: regulator-vintana2 { + compatible = "ti,twl4030-vintana2"; + }; + + vintdig: regulator-vintdig { + compatible = "ti,twl4030-vintdig"; }; vmmc1: regulator-vmmc1 { @@ -65,6 +91,16 @@ compatible = "ti,twl4030-vusb3v1"; }; + vpll1: regulator-vpll1 { + compatible = "ti,twl4030-vpll1"; + }; + + vpll2: regulator-vpll2 { + compatible = "ti,twl4030-vpll2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vsim: regulator-vsim { compatible = "ti,twl4030-vsim"; regulator-min-microvolt = <1800000>; @@ -86,6 +122,7 @@ usb1v8-supply = <&vusb1v8>; usb3v1-supply = <&vusb3v1>; usb_mode = <1>; + #phy-cells = <0>; }; twl_pwm: pwm { @@ -97,4 +134,9 @@ compatible = "ti,twl4030-pwmled"; #pwm-cells = <2>; }; + + twl_pwrbutton: pwrbutton { + compatible = "ti,twl4030-pwrbutton"; + interrupts = <8>; + }; }; diff --git a/arch/arm/boot/dts/twl6030_omap4.dtsi b/arch/arm/boot/dts/twl6030_omap4.dtsi new file mode 100644 index 00000000000..a4fa5703c42 --- /dev/null +++ b/arch/arm/boot/dts/twl6030_omap4.dtsi @@ -0,0 +1,38 @@ +/* + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&twl { + /* + * On most OMAP4 platforms, the twl6030 IRQ line is connected + * to the SYS_NIRQ1 line on OMAP and the twl6030 MSECURE line is + * connected to the fref_clk0_out.sys_drm_msecure line. + * Therefore, configure the defaults for the SYS_NIRQ1 and + * fref_clk0_out.sys_drm_msecure pins here. + */ + pinctrl-names = "default"; + pinctrl-0 = < + &twl6030_pins + &twl6030_wkup_pins + >; +}; + +&omap4_pmx_wkup { + twl6030_wkup_pins: pinmux_twl6030_wkup_pins { + pinctrl-single,pins = < + 0x14 (PIN_OUTPUT | MUX_MODE2) /* fref_clk0_out.sys_drm_msecure */ + >; + }; +}; + +&omap4_pmx_core { + twl6030_pins: pinmux_twl6030_pins { + pinctrl-single,pins = < + 0x15e (WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq1.sys_nirq1 */ + >; + }; +}; diff --git a/arch/arm/boot/dts/vf610-cosmic.dts b/arch/arm/boot/dts/vf610-cosmic.dts new file mode 100644 index 00000000000..c42e4f938dc --- /dev/null +++ b/arch/arm/boot/dts/vf610-cosmic.dts @@ -0,0 +1,47 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * Copyright 2013 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +/dts-v1/; +#include "vf610.dtsi" + +/ { + model = "PHYTEC Cosmic/Cosmic+ Board"; + compatible = "phytec,vf610-cosmic", "fsl,vf610"; + + chosen { + bootargs = "console=ttyLP1,115200"; + }; + + memory { + reg = <0x80000000 0x10000000>; + }; + + clocks { + enet_ext { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + }; + }; + +}; + +&fec1 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1_1>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_1>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts index 1a58678b93f..c8047ca1650 100644 --- a/arch/arm/boot/dts/vf610-twr.dts +++ b/arch/arm/boot/dts/vf610-twr.dts @@ -36,6 +36,23 @@ }; +&dspi0 { + bus-num = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dspi0_1>; + status = "okay"; + + sflash: at26df081a@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at26df081a"; + spi-max-frequency = <16000000>; + spi-cpol; + spi-cpha; + reg = <0>; + }; +}; + &fec0 { phy-mode = "rmii"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi index 67d929cf980..d31ce1b4a7b 100644 --- a/arch/arm/boot/dts/vf610.dtsi +++ b/arch/arm/boot/dts/vf610.dtsi @@ -123,6 +123,18 @@ status = "disabled"; }; + dspi0: dspi0@4002c000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,vf610-dspi"; + reg = <0x4002c000 0x1000>; + interrupts = <0 67 0x04>; + clocks = <&clks VF610_CLK_DSPI0>; + clock-names = "dspi"; + spi-num-chipselects = <5>; + status = "disabled"; + }; + sai2: sai@40031000 { compatible = "fsl,vf610-sai"; reg = <0x40031000 0x1000>; diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile index 8c60f473e97..eaa9cf4705a 100644 --- a/arch/arm/common/Makefile +++ b/arch/arm/common/Makefile @@ -6,7 +6,6 @@ obj-y += firmware.o obj-$(CONFIG_ICST) += icst.o obj-$(CONFIG_SA1111) += sa1111.o -obj-$(CONFIG_PCI_HOST_VIA82C505) += via82c505.o obj-$(CONFIG_DMABOUNCE) += dmabounce.o obj-$(CONFIG_SHARP_LOCOMO) += locomo.o obj-$(CONFIG_SHARP_PARAM) += sharpsl_param.o diff --git a/arch/arm/common/via82c505.c b/arch/arm/common/via82c505.c deleted file mode 100644 index 6cb362e56d2..00000000000 --- a/arch/arm/common/via82c505.c +++ /dev/null @@ -1,83 +0,0 @@ -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/interrupt.h> -#include <linux/mm.h> -#include <linux/init.h> -#include <linux/ioport.h> -#include <linux/io.h> - - -#include <asm/mach/pci.h> - -#define MAX_SLOTS 7 - -#define CONFIG_CMD(bus, devfn, where) (0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3)) - -static int -via82c505_read_config(struct pci_bus *bus, unsigned int devfn, int where, - int size, u32 *value) -{ - outl(CONFIG_CMD(bus,devfn,where),0xCF8); - switch (size) { - case 1: - *value=inb(0xCFC + (where&3)); - break; - case 2: - *value=inw(0xCFC + (where&2)); - break; - case 4: - *value=inl(0xCFC); - break; - } - return PCIBIOS_SUCCESSFUL; -} - -static int -via82c505_write_config(struct pci_bus *bus, unsigned int devfn, int where, - int size, u32 value) -{ - outl(CONFIG_CMD(bus,devfn,where),0xCF8); - switch (size) { - case 1: - outb(value, 0xCFC + (where&3)); - break; - case 2: - outw(value, 0xCFC + (where&2)); - break; - case 4: - outl(value, 0xCFC); - break; - } - return PCIBIOS_SUCCESSFUL; -} - -struct pci_ops via82c505_ops = { - .read = via82c505_read_config, - .write = via82c505_write_config, -}; - -void __init via82c505_preinit(void) -{ - printk(KERN_DEBUG "PCI: VIA 82c505\n"); - if (!request_region(0xA8,2,"via config")) { - printk(KERN_WARNING"VIA 82c505: Unable to request region 0xA8\n"); - return; - } - if (!request_region(0xCF8,8,"pci config")) { - printk(KERN_WARNING"VIA 82c505: Unable to request region 0xCF8\n"); - release_region(0xA8, 2); - return; - } - - /* Enable compatible Mode */ - outb(0x96,0xA8); - outb(0x18,0xA9); - outb(0x93,0xA8); - outb(0xd0,0xA9); - -} - -int __init via82c505_setup(int nr, struct pci_sys_data *sys) -{ - return (nr == 0); -} diff --git a/arch/arm/configs/bcm_defconfig b/arch/arm/configs/bcm_defconfig index 6e4931097dd..287ac1d7aac 100644 --- a/arch/arm/configs/bcm_defconfig +++ b/arch/arm/configs/bcm_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y # CONFIG_LOCALVERSION_AUTO is not set # CONFIG_SWAP is not set CONFIG_SYSVIPC=y @@ -25,10 +24,9 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set CONFIG_PARTITION_ADVANCED=y -CONFIG_EFI_PARTITION=y CONFIG_ARCH_BCM=y +CONFIG_ARCH_BCM_MOBILE=y CONFIG_ARM_THUMBEE=y -CONFIG_ARM_ERRATA_743622=y CONFIG_PREEMPT=y CONFIG_AEABI=y # CONFIG_OABI_COMPAT is not set @@ -50,7 +48,6 @@ CONFIG_UNIX_DIAG=y CONFIG_NET_KEY=y CONFIG_INET=y CONFIG_IP_MULTICAST=y -CONFIG_ARPD=y CONFIG_SYN_COOKIES=y CONFIG_TCP_MD5SIG=y CONFIG_IPV6=y @@ -95,7 +92,6 @@ CONFIG_MMC_UNSAFE_RESUME=y CONFIG_MMC_BLOCK_MINORS=32 CONFIG_MMC_TEST=y CONFIG_MMC_SDHCI=y -CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_BCM_KONA=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y @@ -117,12 +113,12 @@ CONFIG_CONFIGFS_FS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_PRINTK_TIME=y -CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_INFO=y CONFIG_DEBUG_FS=y +CONFIG_MAGIC_SYSRQ=y CONFIG_DETECT_HUNG_TASK=y CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=110 CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y -CONFIG_DEBUG_INFO=y # CONFIG_FTRACE is not set CONFIG_CRC_CCITT=y CONFIG_CRC_T10DIF=y diff --git a/arch/arm/configs/bockw_defconfig b/arch/arm/configs/bockw_defconfig index e7e94948d19..b38cd107f82 100644 --- a/arch/arm/configs/bockw_defconfig +++ b/arch/arm/configs/bockw_defconfig @@ -91,6 +91,10 @@ CONFIG_VIDEO_RCAR_VIN=y CONFIG_VIDEO_ML86V7667=y CONFIG_SPI=y CONFIG_SPI_SH_HSPI=y +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_SOC=y +CONFIG_SND_SOC_RCAR=y CONFIG_USB=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_EHCI_HCD=y diff --git a/arch/arm/configs/ep93xx_defconfig b/arch/arm/configs/ep93xx_defconfig index 806005a4c4c..6ac5ea73bd0 100644 --- a/arch/arm/configs/ep93xx_defconfig +++ b/arch/arm/configs/ep93xx_defconfig @@ -1,15 +1,14 @@ -CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_EXPERT=y CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y # CONFIG_IOSCHED_CFQ is not set CONFIG_ARCH_EP93XX=y CONFIG_CRUNCH=y @@ -47,11 +46,8 @@ CONFIG_IPV6=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_FW_LOADER is not set CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_REDBOOT_PARTS=y CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_ADV_OPTIONS=y @@ -67,15 +63,14 @@ CONFIG_SCSI=y # CONFIG_SCSI_PROC_FS is not set CONFIG_BLK_DEV_SD=y CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y CONFIG_EP93XX_ETH=y CONFIG_USB_RTL8150=y # CONFIG_INPUT is not set # CONFIG_SERIO is not set # CONFIG_VT is not set +# CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_AMBA_PL010=y CONFIG_SERIAL_AMBA_PL010_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set # CONFIG_HW_RANDOM is not set CONFIG_I2C=y CONFIG_I2C_CHARDEV=y @@ -86,9 +81,9 @@ CONFIG_WATCHDOG=y CONFIG_EP93XX_WATCHDOG=y CONFIG_USB=y CONFIG_USB_DEBUG=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_DYNAMIC_MINORS=y CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_HCD_PLATFORM=y CONFIG_USB_STORAGE=y CONFIG_USB_SERIAL=y CONFIG_USB_SERIAL_CONSOLE=y @@ -100,24 +95,18 @@ CONFIG_RTC_DRV_EP93XX=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set -CONFIG_INOTIFY=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y CONFIG_JFFS2_FS=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_SLAB=y CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_MUTEXES=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y CONFIG_DEBUG_LL=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_LIBCRC32C=y diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 5d488c24b13..8d0c5a018ed 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -132,7 +132,6 @@ CONFIG_TOUCHSCREEN_MC13783=y CONFIG_INPUT_MISC=y CONFIG_INPUT_MMA8450=y CONFIG_SERIO_SERPORT=m -CONFIG_VT_HW_CONSOLE_BINDING=y # CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set CONFIG_SERIAL_IMX=y @@ -188,22 +187,33 @@ CONFIG_SND_SOC_PHYCORE_AC97=y CONFIG_SND_SOC_EUKREA_TLV320=y CONFIG_SND_SOC_IMX_WM8962=y CONFIG_SND_SOC_IMX_SGTL5000=y +CONFIG_SND_SOC_IMX_SPDIF=y CONFIG_SND_SOC_IMX_MC13783=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_MXC=y CONFIG_USB_STORAGE=y CONFIG_USB_CHIPIDEA=y +CONFIG_USB_CHIPIDEA_UDC=y CONFIG_USB_CHIPIDEA_HOST=y -CONFIG_USB_PHY=y CONFIG_NOP_USB_XCEIV=y CONFIG_USB_MXS_PHY=y +CONFIG_USB_GADGET=y +CONFIG_USB_ETH=m +CONFIG_USB_MASS_STORAGE=m CONFIG_MMC=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_ESDHC_IMX=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_ONESHOT=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_BACKLIGHT=y +CONFIG_LEDS_TRIGGER_GPIO=y CONFIG_RTC_CLASS=y CONFIG_RTC_INTF_DEV_UIE_EMUL=y CONFIG_RTC_DRV_MC13XXX=y @@ -246,7 +256,6 @@ CONFIG_UDF_FS=m CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=y CONFIG_TMPFS=y -CONFIG_CONFIGFS_FS=m CONFIG_JFFS2_FS=y CONFIG_UBIFS_FS=y CONFIG_NFS_FS=y @@ -261,6 +270,7 @@ CONFIG_NLS_ISO8859_15=m CONFIG_NLS_UTF8=y CONFIG_MAGIC_SYSRQ=y # CONFIG_SCHED_DEBUG is not set +CONFIG_PROVE_LOCKING=y # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_FTRACE is not set # CONFIG_ARM_UNWIND is not set diff --git a/arch/arm/configs/integrator_defconfig b/arch/arm/configs/integrator_defconfig index a8314c3ee84..5bae1955759 100644 --- a/arch/arm/configs/integrator_defconfig +++ b/arch/arm/configs/integrator_defconfig @@ -1,15 +1,17 @@ -CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y -CONFIG_TINY_RCU=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y +CONFIG_PARTITION_ADVANCED=y CONFIG_ARCH_INTEGRATOR=y CONFIG_ARCH_INTEGRATOR_AP=y CONFIG_ARCH_INTEGRATOR_CP=y +CONFIG_INTEGRATOR_IMPD1=y CONFIG_CPU_ARM720T=y CONFIG_CPU_ARM920T=y CONFIG_CPU_ARM922T=y @@ -18,12 +20,9 @@ CONFIG_CPU_ARM1020=y CONFIG_CPU_ARM1022=y CONFIG_CPU_ARM1026=y CONFIG_PCI=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y CONFIG_PREEMPT=y CONFIG_AEABI=y -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y +# CONFIG_ATAGS is not set CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="console=ttyAM0,38400n8 root=/dev/nfs ip=bootp" @@ -44,24 +43,20 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_AFS_PARTS=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_ADV_OPTIONS=y CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_PHYSMAP=y +CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_NET_PCI=y CONFIG_E100=y CONFIG_SMC91X=y # CONFIG_KEYBOARD_ATKBD is not set # CONFIG_SERIO_SERPORT is not set -CONFIG_SERIAL_AMBA_PL010=y -CONFIG_SERIAL_AMBA_PL010_CONSOLE=y CONFIG_FB=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_ARMCLCD=y @@ -71,19 +66,23 @@ CONFIG_FB_MATROX_MYSTIQUE=y # CONFIG_VGA_CONSOLE is not set CONFIG_MMC=y CONFIG_MMC_ARMMMCI=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_CPU=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_PL030=y +CONFIG_COMMON_CLK_DEBUG=y CONFIG_EXT2_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y CONFIG_JFFS2_FS=y CONFIG_CRAMFS=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_ROOT_NFS=y CONFIG_NFSD=y CONFIG_NFSD_V3=y -CONFIG_PARTITION_ADVANCED=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_MAGIC_SYSRQ=y diff --git a/arch/arm/configs/keystone_defconfig b/arch/arm/configs/keystone_defconfig index 1f36b823905..9943e5da74f 100644 --- a/arch/arm/configs/keystone_defconfig +++ b/arch/arm/configs/keystone_defconfig @@ -123,7 +123,9 @@ CONFIG_SERIAL_OF_PLATFORM=y CONFIG_I2C=y # CONFIG_I2C_COMPAT is not set CONFIG_I2C_CHARDEV=y +CONFIG_I2C_DAVINCI=y CONFIG_SPI=y +CONFIG_SPI_DAVINCI=y CONFIG_SPI_SPIDEV=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y diff --git a/arch/arm/configs/koelsch_defconfig b/arch/arm/configs/koelsch_defconfig new file mode 100644 index 00000000000..825c16dee8a --- /dev/null +++ b/arch/arm/configs/koelsch_defconfig @@ -0,0 +1,54 @@ +CONFIG_SYSVIPC=y +CONFIG_NO_HZ=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=16 +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_EMBEDDED=y +CONFIG_PERF_EVENTS=y +CONFIG_SLAB=y +# CONFIG_BLOCK is not set +CONFIG_ARCH_SHMOBILE=y +CONFIG_ARCH_R8A7791=y +CONFIG_MACH_KOELSCH=y +# CONFIG_SWP_EMULATE is not set +CONFIG_CPU_BPREDICT_DISABLE=y +CONFIG_PL310_ERRATA_588369=y +CONFIG_ARM_ERRATA_754322=y +CONFIG_SMP=y +CONFIG_SCHED_MC=y +CONFIG_NR_CPUS=8 +CONFIG_AEABI=y +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_ARM_APPENDED_DTB=y +CONFIG_KEXEC=y +CONFIG_AUTO_ZRELADDR=y +CONFIG_VFP=y +CONFIG_NEON=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_PM_RUNTIME=y +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_LEGACY_PTYS is not set +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=20 +CONFIG_SERIAL_SH_SCI_CONSOLE=y +# CONFIG_HWMON is not set +CONFIG_THERMAL=y +CONFIG_RCAR_THERMAL=y +# CONFIG_HID is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +# CONFIG_IOMMU_SUPPORT is not set +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY_USER is not set +CONFIG_TMPFS=y +CONFIG_CONFIGFS_FS=y +# CONFIG_MISC_FILESYSTEMS is not set +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +# CONFIG_ARM_UNWIND is not set diff --git a/arch/arm/configs/lager_defconfig b/arch/arm/configs/lager_defconfig index e777ef22b80..35bff5e0d57 100644 --- a/arch/arm/configs/lager_defconfig +++ b/arch/arm/configs/lager_defconfig @@ -89,6 +89,8 @@ CONFIG_THERMAL=y CONFIG_RCAR_THERMAL=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_DRM=y +CONFIG_DRM_RCAR_DU=y # CONFIG_USB_SUPPORT is not set CONFIG_MMC=y CONFIG_MMC_SDHI=y diff --git a/arch/arm/configs/marzen_defconfig b/arch/arm/configs/marzen_defconfig index 000e9205b2b..5cc6360340b 100644 --- a/arch/arm/configs/marzen_defconfig +++ b/arch/arm/configs/marzen_defconfig @@ -92,6 +92,8 @@ CONFIG_SOC_CAMERA=y CONFIG_VIDEO_RCAR_VIN=y # CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set CONFIG_VIDEO_ADV7180=y +CONFIG_DRM=y +CONFIG_DRM_RCAR_DU=y CONFIG_USB=y CONFIG_USB_RCAR_PHY=y CONFIG_MMC=y diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 119fc378fc5..4a5903e0482 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -6,6 +6,7 @@ CONFIG_ARCH_MVEBU=y CONFIG_MACH_ARMADA_370=y CONFIG_MACH_ARMADA_XP=y CONFIG_ARCH_BCM=y +CONFIG_ARCH_BCM_MOBILE=y CONFIG_GPIO_PCA953X=y CONFIG_ARCH_HIGHBANK=y CONFIG_ARCH_KEYSTONE=y diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig index 4555c025629..6150108e15d 100644 --- a/arch/arm/configs/mxs_defconfig +++ b/arch/arm/configs/mxs_defconfig @@ -76,7 +76,6 @@ CONFIG_INPUT_EVDEV=y CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_TSC2007=m # CONFIG_SERIO is not set -CONFIG_VT_HW_CONSOLE_BINDING=y CONFIG_DEVPTS_MULTIPLE_INSTANCES=y # CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set @@ -91,7 +90,6 @@ CONFIG_I2C_MXS=y CONFIG_SPI=y CONFIG_SPI_GPIO=m CONFIG_SPI_MXS=y -CONFIG_DEBUG_GPIO=y CONFIG_GPIO_SYSFS=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y @@ -115,9 +113,12 @@ CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_CHIPIDEA=y +CONFIG_USB_CHIPIDEA_UDC=y CONFIG_USB_CHIPIDEA_HOST=y -CONFIG_USB_PHY=y CONFIG_USB_MXS_PHY=y +CONFIG_USB_GADGET=y +CONFIG_USB_ETH=m +CONFIG_USB_MASS_STORAGE=m CONFIG_MMC=y CONFIG_MMC_UNSAFE_RESUME=y CONFIG_MMC_MXS=y diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 254cf053943..98a50c309b9 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -1,14 +1,13 @@ -CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=16 CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y -# CONFIG_SYSCTL_SYSCALL is not set -CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_SLAB=y CONFIG_PROFILING=y CONFIG_OPROFILE=y @@ -20,22 +19,21 @@ CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y # CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y CONFIG_ARCH_MULTI_V6=y -CONFIG_ARCH_OMAP2PLUS=y +CONFIG_OMAP_RESET_CLOCKS=y +CONFIG_OMAP_MUX_DEBUG=y CONFIG_ARCH_OMAP2=y CONFIG_ARCH_OMAP3=y CONFIG_ARCH_OMAP4=y +CONFIG_SOC_OMAP5=y CONFIG_SOC_AM33XX=y -CONFIG_OMAP_RESET_CLOCKS=y -CONFIG_OMAP_MUX_DEBUG=y -CONFIG_ARCH_VEXPRESS_CA9X4=y +CONFIG_SOC_DRA7XX=y CONFIG_ARM_THUMBEE=y CONFIG_ARM_ERRATA_411920=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y CONFIG_SMP=y CONFIG_NR_CPUS=2 -CONFIG_LEDS=y +CONFIG_CMA=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y @@ -61,8 +59,6 @@ CONFIG_IP_PNP_RARP=y # CONFIG_IPV6 is not set CONFIG_NETFILTER=y CONFIG_CAN=m -CONFIG_CAN_RAW=m -CONFIG_CAN_BCM=m CONFIG_CAN_C_CAN=m CONFIG_CAN_C_CAN_PLATFORM=m CONFIG_BT=m @@ -77,14 +73,13 @@ CONFIG_MAC80211=m CONFIG_MAC80211_RC_PID=y CONFIG_MAC80211_RC_DEFAULT_PID=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_CMA=y -CONFIG_DMA_CMA=y -CONFIG_CONNECTOR=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y +CONFIG_DMA_CMA=y +CONFIG_OMAP_OCP2SCP=y +CONFIG_CONNECTOR=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_OOPS=y CONFIG_MTD_CFI=y @@ -98,32 +93,40 @@ CONFIG_MTD_UBI=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=16384 -CONFIG_SENSORS_LIS3LV02D=m CONFIG_SENSORS_TSL2550=m -CONFIG_SENSORS_LIS3_I2C=m CONFIG_BMP085_I2C=m +CONFIG_SENSORS_LIS3_I2C=m CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_SCAN_ASYNC=y CONFIG_MD=y CONFIG_NETDEVICES=y -CONFIG_SMSC_PHY=y -CONFIG_NET_ETHERNET=y -CONFIG_SMC91X=y -CONFIG_SMSC911X=y CONFIG_KS8851=y CONFIG_KS8851_MLL=y -CONFIG_LIBERTAS=m -CONFIG_LIBERTAS_USB=m -CONFIG_LIBERTAS_SDIO=m -CONFIG_LIBERTAS_DEBUG=y +CONFIG_SMC91X=y +CONFIG_SMSC911X=y +CONFIG_TI_CPSW=y +CONFIG_AT803X_PHY=y +CONFIG_SMSC_PHY=y CONFIG_USB_USBNET=y CONFIG_USB_NET_SMSC95XX=y CONFIG_USB_ALI_M5632=y CONFIG_USB_AN2720=y CONFIG_USB_EPSON2888=y CONFIG_USB_KC2190=y +CONFIG_LIBERTAS=m +CONFIG_LIBERTAS_USB=m +CONFIG_LIBERTAS_SDIO=m +CONFIG_LIBERTAS_DEBUG=y +CONFIG_WL_TI=y +CONFIG_WL12XX=m +CONFIG_WL18XX=m +CONFIG_WLCORE_SPI=m +CONFIG_WLCORE_SDIO=m +CONFIG_MWIFIEX=m +CONFIG_MWIFIEX_SDIO=m +CONFIG_MWIFIEX_USB=m CONFIG_INPUT_JOYDEV=y CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_GPIO=y @@ -133,7 +136,6 @@ CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ADS7846=y CONFIG_INPUT_MISC=y CONFIG_INPUT_TWL4030_PWRBUTTON=y -CONFIG_VT_HW_CONSOLE_BINDING=y # CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y @@ -143,8 +145,7 @@ CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y CONFIG_SERIAL_8250_DETECT_IRQ=y CONFIG_SERIAL_8250_RSA=y -CONFIG_SERIAL_AMBA_PL011=y -CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_SERIAL_OF_PLATFORM=y CONFIG_SERIAL_OMAP=y CONFIG_SERIAL_OMAP_CONSOLE=y CONFIG_HW_RANDOM=y @@ -158,31 +159,31 @@ CONFIG_GPIO_TWL4030=y CONFIG_W1=y CONFIG_POWER_SUPPLY=y CONFIG_SENSORS_LM75=m -CONFIG_WATCHDOG=y CONFIG_THERMAL=y -CONFIG_THERMAL_HWMON=y -CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y CONFIG_THERMAL_GOV_FAIR_SHARE=y -CONFIG_THERMAL_GOV_STEP_WISE=y CONFIG_THERMAL_GOV_USER_SPACE=y -CONFIG_CPU_THERMAL=y +CONFIG_TI_SOC_THERMAL=y +CONFIG_OMAP4_THERMAL=y +CONFIG_OMAP5_THERMAL=y +CONFIG_DRA752_THERMAL=y +CONFIG_WATCHDOG=y CONFIG_OMAP_WATCHDOG=y CONFIG_TWL4030_WATCHDOG=y +CONFIG_MFD_PALMAS=y CONFIG_MFD_TPS65217=y CONFIG_MFD_TPS65910=y CONFIG_TWL6040_CORE=y -CONFIG_REGULATOR_TWL4030=y +CONFIG_REGULATOR_PALMAS=y CONFIG_REGULATOR_TPS65023=y CONFIG_REGULATOR_TPS6507X=y CONFIG_REGULATOR_TPS65217=y CONFIG_REGULATOR_TPS65910=y +CONFIG_REGULATOR_TWL4030=y CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y -CONFIG_FB_OMAP_LCD_VGA=y CONFIG_OMAP2_DSS=m -CONFIG_OMAP2_DSS_RFBI=y CONFIG_OMAP2_DSS_SDI=y CONFIG_OMAP2_DSS_DSI=y CONFIG_FB_OMAP2=m @@ -194,12 +195,8 @@ CONFIG_DISPLAY_PANEL_DPI=m CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_PLATFORM=y -CONFIG_DISPLAY_SUPPORT=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y -CONFIG_FONTS=y -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y CONFIG_LOGO=y CONFIG_SOUND=m CONFIG_SND=m @@ -216,14 +213,14 @@ CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m CONFIG_USB=y CONFIG_USB_DEBUG=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_WDM=y CONFIG_USB_STORAGE=y -CONFIG_USB_LIBUSUAL=y +CONFIG_USB_DWC3=m CONFIG_USB_TEST=y -CONFIG_USB_PHY=y CONFIG_NOP_USB_XCEIV=y +CONFIG_OMAP_USB2=y +CONFIG_OMAP_USB3=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_DEBUG=y CONFIG_USB_GADGET_DEBUG_FILES=y @@ -232,7 +229,6 @@ CONFIG_USB_ZERO=m CONFIG_MMC=y CONFIG_MMC_UNSAFE_RESUME=y CONFIG_SDIO_UART=y -CONFIG_MMC_ARMMMCI=y CONFIG_MMC_OMAP=y CONFIG_MMC_OMAP_HS=y CONFIG_NEW_LEDS=y @@ -252,11 +248,8 @@ CONFIG_RTC_DRV_OMAP=y CONFIG_DMADEVICES=y CONFIG_TI_EDMA=y CONFIG_DMA_OMAP=y -CONFIG_TI_SOC_THERMAL=y -CONFIG_TI_THERMAL=y -CONFIG_OMAP4_THERMAL=y -CONFIG_OMAP5_THERMAL=y -CONFIG_DRA752_THERMAL=y +CONFIG_EXTCON=y +CONFIG_EXTCON_PALMAS=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set @@ -275,23 +268,18 @@ CONFIG_JFFS2_RUBIN=y CONFIG_UBIFS_FS=y CONFIG_CRAMFS=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_PRINTK_TIME=y +CONFIG_DEBUG_INFO=y CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y CONFIG_SCHEDSTATS=y CONFIG_TIMER_STATS=y CONFIG_PROVE_LOCKING=y -CONFIG_DEBUG_SPINLOCK_SLEEP=y # CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SECURITY=y CONFIG_CRYPTO_MICHAEL_MIC=y # CONFIG_CRYPTO_ANSI_CPRNG is not set @@ -300,9 +288,6 @@ CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=y CONFIG_CRC7=y CONFIG_LIBCRC32C=y -CONFIG_SOC_OMAP5=y -CONFIG_TI_DAVINCI_MDIO=y -CONFIG_TI_DAVINCI_CPDMA=y -CONFIG_TI_CPSW=y -CONFIG_AT803X_PHY=y -CONFIG_SOC_DRA7XX=y +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y diff --git a/arch/arm/configs/shark_defconfig b/arch/arm/configs/shark_defconfig deleted file mode 100644 index e319b2c56f1..00000000000 --- a/arch/arm/configs/shark_defconfig +++ /dev/null @@ -1,80 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_SHARK=y -CONFIG_LEDS=y -CONFIG_LEDS_TIMER=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_STANDALONE is not set -# CONFIG_FIRMWARE_IN_KERNEL is not set -CONFIG_PARPORT=m -CONFIG_PARPORT_PC=m -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_IDE=y -CONFIG_BLK_DEV_IDECD=m -CONFIG_SCSI=m -CONFIG_BLK_DEV_SD=m -CONFIG_CHR_DEV_ST=m -CONFIG_BLK_DEV_SR=m -CONFIG_CHR_DEV_SG=m -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_NET_PCI=y -CONFIG_CS89x0=y -# CONFIG_SERIO_SERPORT is not set -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_PRINTER=m -# CONFIG_HWMON is not set -CONFIG_FB=y -CONFIG_FB_CYBER2000=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_LOGO=y -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_VGA16 is not set -CONFIG_SOUND=m -CONFIG_SOUND_PRIME=m -CONFIG_SOUND_OSS=m -CONFIG_SOUND_SB=m -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_CMOS=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFSD=m -CONFIG_PARTITION_ADVANCED=y -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_ISO8859_1=m -# CONFIG_ENABLE_MUST_CHECK is not set -CONFIG_DEBUG_KERNEL=y -# CONFIG_SCHED_DEBUG is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_DEBUG_USER=y diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig new file mode 100644 index 00000000000..d57a85badb5 --- /dev/null +++ b/arch/arm/configs/sunxi_defconfig @@ -0,0 +1,61 @@ +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_ARCH_SUNXI=y +CONFIG_SMP=y +CONFIG_AEABI=y +CONFIG_HIGHMEM=y +CONFIG_HIGHPTE=y +CONFIG_VFP=y +CONFIG_NEON=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_IPV6 is not set +# CONFIG_WIRELESS is not set +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_NETDEVICES=y +CONFIG_SUN4I_EMAC=y +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_CIRRUS is not set +# CONFIG_NET_VENDOR_FARADAY is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_SMSC is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_WIZNET is not set +# CONFIG_WLAN is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=8 +CONFIG_SERIAL_8250_RUNTIME_UARTS=8 +CONFIG_SERIAL_8250_DW=y +CONFIG_I2C=y +# CONFIG_I2C_COMPAT is not set +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_MV64XXX=y +CONFIG_GPIO_SYSFS=y +# CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_SUNXI_WATCHDOG=y +# CONFIG_USB_SUPPORT is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y +CONFIG_COMMON_CLK_DEBUG=y +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_NLS=y diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig index ea042e80e54..4934295bb4f 100644 --- a/arch/arm/configs/tegra_defconfig +++ b/arch/arm/configs/tegra_defconfig @@ -27,6 +27,7 @@ CONFIG_ARCH_TEGRA=y CONFIG_ARCH_TEGRA_2x_SOC=y CONFIG_ARCH_TEGRA_3x_SOC=y CONFIG_ARCH_TEGRA_114_SOC=y +CONFIG_ARCH_TEGRA_124_SOC=y CONFIG_TEGRA_EMC_SCALING_ENABLE=y CONFIG_PCI=y CONFIG_PCI_MSI=y @@ -41,9 +42,11 @@ CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_KEXEC=y CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_STAT_DETAILS=y CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_IDLE=y CONFIG_VFP=y +CONFIG_NEON=y CONFIG_PM_RUNTIME=y CONFIG_NET=y CONFIG_PACKET=y @@ -129,6 +132,7 @@ CONFIG_SPI=y CONFIG_SPI_TEGRA114=y CONFIG_SPI_TEGRA20_SFLASH=y CONFIG_SPI_TEGRA20_SLINK=y +CONFIG_PINCTRL_PALMAS=y CONFIG_GPIO_PCA953X_IRQ=y CONFIG_GPIO_PALMAS=y CONFIG_GPIO_TPS6586X=y @@ -223,6 +227,7 @@ CONFIG_KEYBOARD_NVEC=y CONFIG_SERIO_NVEC_PS2=y CONFIG_NVEC_POWER=y CONFIG_NVEC_PAZ00=y +CONFIG_COMMON_CLK_DEBUG=y CONFIG_TEGRA_IOMMU_GART=y CONFIG_TEGRA_IOMMU_SMMU=y CONFIG_MEMORY=y diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index a0025dc1302..ac632cc38f2 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -1,4 +1,3 @@ -CONFIG_HIGHMEM=y # CONFIG_SWAP is not set CONFIG_SYSVIPC=y CONFIG_NO_HZ=y @@ -16,6 +15,9 @@ CONFIG_SMP=y CONFIG_NR_CPUS=2 CONFIG_PREEMPT=y CONFIG_AEABI=y +CONFIG_HIGHMEM=y +CONFIG_ARM_APPENDED_DTB=y +CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_CMDLINE="root=/dev/ram0 console=ttyAMA2,115200n8" CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y @@ -68,8 +70,8 @@ CONFIG_CPU_THERMAL=y CONFIG_WATCHDOG=y CONFIG_MFD_STMPE=y CONFIG_MFD_TC3589X=y -CONFIG_REGULATOR_GPIO=y CONFIG_REGULATOR_AB8500=y +CONFIG_REGULATOR_GPIO=y CONFIG_SOUND=y CONFIG_SND=y CONFIG_SND_SOC=y @@ -78,10 +80,8 @@ CONFIG_SND_SOC_UX500_MACH_MOP500=y CONFIG_USB=y CONFIG_USB_MUSB_HDRC=y CONFIG_USB_MUSB_UX500=y -CONFIG_USB_PHY=y CONFIG_AB8500_USB=y CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_MUSB_HDRC=y CONFIG_USB_ETH=m CONFIG_MMC=y CONFIG_MMC_UNSAFE_RESUME=y @@ -116,12 +116,12 @@ CONFIG_NFS_FS=y CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y -CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_INFO=y CONFIG_DEBUG_FS=y +CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y # CONFIG_SCHED_DEBUG is not set # CONFIG_DEBUG_PREEMPT is not set -CONFIG_DEBUG_INFO=y # CONFIG_FTRACE is not set CONFIG_DEBUG_USER=y CONFIG_CRYPTO_DEV_UX500=y diff --git a/arch/arm/configs/vexpress_defconfig b/arch/arm/configs/vexpress_defconfig index f2de51f0bd1..f489fdaa19b 100644 --- a/arch/arm/configs/vexpress_defconfig +++ b/arch/arm/configs/vexpress_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SYSVIPC=y CONFIG_IKCONFIG=y @@ -8,11 +7,9 @@ CONFIG_CGROUPS=y CONFIG_CPUSETS=y # CONFIG_UTS_NS is not set # CONFIG_IPC_NS is not set -# CONFIG_USER_NS is not set # CONFIG_PID_NS is not set # CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_PROFILING=y CONFIG_OPROFILE=y CONFIG_MODULES=y @@ -23,14 +20,22 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_IOSCHED_CFQ is not set CONFIG_ARCH_VEXPRESS=y CONFIG_ARCH_VEXPRESS_CA9X4=y +CONFIG_ARCH_VEXPRESS_DCSCB=y +CONFIG_ARCH_VEXPRESS_TC2_PM=y # CONFIG_SWP_EMULATE is not set CONFIG_SMP=y +CONFIG_HAVE_ARM_ARCH_TIMER=y +CONFIG_MCPM=y CONFIG_VMSPLIT_2G=y -CONFIG_HOTPLUG_CPU=y +CONFIG_NR_CPUS=8 +CONFIG_ARM_PSCI=y CONFIG_AEABI=y +CONFIG_CMA=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="root=/dev/nfs nfsroot=10.1.69.3:/work/nfsroot ip=dhcp console=ttyAMA0 mem=128M" +CONFIG_CMDLINE="console=ttyAMA0" +CONFIG_CPU_IDLE=y +CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y CONFIG_VFP=y CONFIG_NEON=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set @@ -44,37 +49,46 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_LRO is not set # CONFIG_IPV6 is not set # CONFIG_WIRELESS is not set +CONFIG_NET_9P=y +CONFIG_NET_9P_VIRTIO=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_ARM_INTEGRATOR=y -CONFIG_MISC_DEVICES=y +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_OF=y +CONFIG_MTD_PLATRAM=y +CONFIG_MTD_UBI=y +CONFIG_PROC_DEVICETREE=y +CONFIG_VIRTIO_BLK=y # CONFIG_SCSI_PROC_FS is not set CONFIG_BLK_DEV_SD=y -# CONFIG_SCSI_LOWLEVEL is not set +CONFIG_SCSI_VIRTIO=y CONFIG_ATA=y # CONFIG_SATA_PMP is not set CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y +CONFIG_VIRTIO_NET=y +CONFIG_SMC91X=y CONFIG_SMSC911X=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set # CONFIG_WLAN is not set CONFIG_INPUT_EVDEV=y # CONFIG_SERIO_SERPORT is not set CONFIG_SERIO_AMBAKMI=y +CONFIG_LEGACY_PTY_COUNT=16 CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y -CONFIG_LEGACY_PTY_COUNT=16 -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set +CONFIG_VIRTIO_CONSOLE=y +CONFIG_HW_RANDOM=y +CONFIG_HW_RANDOM_VIRTIO=y +CONFIG_I2C=y +CONFIG_I2C_VERSATILE=y +CONFIG_SENSORS_VEXPRESS=y +CONFIG_REGULATOR=y +CONFIG_REGULATOR_VEXPRESS=y CONFIG_FB=y CONFIG_FB_ARMCLCD=y CONFIG_FRAMEBUFFER_CONSOLE=y @@ -103,38 +117,45 @@ CONFIG_HID_THRUSTMASTER=y CONFIG_HID_ZEROPLUS=y CONFIG_USB=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -# CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_MON=y CONFIG_USB_ISP1760_HCD=y CONFIG_USB_STORAGE=y CONFIG_MMC=y CONFIG_MMC_ARMMMCI=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_CPU=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_PL031=y +CONFIG_VIRTIO_BALLOON=y +CONFIG_VIRTIO_MMIO=y +CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y CONFIG_JFFS2_FS=y +CONFIG_UBIFS_FS=y CONFIG_CRAMFS=y +CONFIG_SQUASHFS=y +CONFIG_SQUASHFS_LZO=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_ROOT_NFS=y -# CONFIG_RPCSEC_GSS_KRB5 is not set +CONFIG_9P_FS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y -CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_INFO=y CONFIG_DEBUG_FS=y +CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_HUNG_TASK=y # CONFIG_SCHED_DEBUG is not set -CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y -CONFIG_DEBUG_LL=y -CONFIG_EARLY_PRINTK=y # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set diff --git a/arch/arm/include/asm/mach/pci.h b/arch/arm/include/asm/mach/pci.h index 454d642a407..7fc42784bec 100644 --- a/arch/arm/include/asm/mach/pci.h +++ b/arch/arm/include/asm/mach/pci.h @@ -106,8 +106,4 @@ extern int dc21285_setup(int nr, struct pci_sys_data *); extern void dc21285_preinit(void); extern void dc21285_postinit(void); -extern struct pci_ops via82c505_ops; -extern int via82c505_setup(int nr, struct pci_sys_data *); -extern void via82c505_init(void *sysdata); - #endif /* __ASM_MACH_PCI_H */ diff --git a/arch/arm/include/asm/sched_clock.h b/arch/arm/include/asm/sched_clock.h deleted file mode 100644 index 2389b71a8e7..00000000000 --- a/arch/arm/include/asm/sched_clock.h +++ /dev/null @@ -1,4 +0,0 @@ -/* You shouldn't include this file. Use linux/sched_clock.h instead. - * Temporary file until all asm/sched_clock.h users are gone - */ -#include <linux/sched_clock.h> diff --git a/arch/arm/include/debug/vf.S b/arch/arm/include/debug/vf.S new file mode 100644 index 00000000000..ba12cc44b2c --- /dev/null +++ b/arch/arm/include/debug/vf.S @@ -0,0 +1,26 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + + .macro addruart, rp, rv, tmp + ldr \rp, =0x40028000 @ physical + ldr \rv, =0xfe028000 @ virtual + .endm + + .macro senduart, rd, rx + strb \rd, [\rx, #0x7] @ Data Register + .endm + + .macro busyuart, rd, rx +1001: ldrb \rd, [\rx, #0x4] @ Status Register 1 + tst \rd, #1 << 6 @ TC + beq 1001b @ wait until transmit done + .endm + + .macro waituart,rd,rx + .endm diff --git a/arch/arm/kernel/psci_smp.c b/arch/arm/kernel/psci_smp.c index 70ded3fb42d..570a48cc3d6 100644 --- a/arch/arm/kernel/psci_smp.c +++ b/arch/arm/kernel/psci_smp.c @@ -14,7 +14,6 @@ */ #include <linux/init.h> -#include <linux/irqchip/arm-gic.h> #include <linux/smp.h> #include <linux/of.h> diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c index 98aee325839..829a96d4a17 100644 --- a/arch/arm/kernel/time.c +++ b/arch/arm/kernel/time.c @@ -11,25 +11,26 @@ * This file contains the ARM-specific time handling details: * reading the RTC at bootup, etc... */ +#include <linux/clk-provider.h> +#include <linux/clocksource.h> +#include <linux/errno.h> #include <linux/export.h> -#include <linux/kernel.h> -#include <linux/interrupt.h> -#include <linux/time.h> #include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/kernel.h> +#include <linux/profile.h> #include <linux/sched.h> +#include <linux/sched_clock.h> #include <linux/smp.h> +#include <linux/time.h> #include <linux/timex.h> -#include <linux/errno.h> -#include <linux/profile.h> #include <linux/timer.h> -#include <linux/clocksource.h> -#include <linux/irq.h> -#include <linux/sched_clock.h> -#include <asm/thread_info.h> -#include <asm/stacktrace.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> +#include <asm/stacktrace.h> +#include <asm/thread_info.h> #if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE) || \ defined(CONFIG_NVRAM) || defined(CONFIG_NVRAM_MODULE) @@ -116,8 +117,12 @@ int __init register_persistent_clock(clock_access_fn read_boot, void __init time_init(void) { - if (machine_desc->init_time) + if (machine_desc->init_time) { machine_desc->init_time(); - else + } else { +#ifdef CONFIG_COMMON_CLK + of_clk_init(NULL); +#endif clocksource_of_init(); + } } diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index bd454b09133..47d7338561d 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -41,7 +41,6 @@ else endif lib-$(CONFIG_ARCH_RPC) += ecard.o io-acorn.o floppydma.o -lib-$(CONFIG_ARCH_SHARK) += io-shark.o $(obj)/csumpartialcopy.o: $(obj)/csumpartialcopygeneric.S $(obj)/csumpartialcopyuser.o: $(obj)/csumpartialcopygeneric.S diff --git a/arch/arm/lib/io-shark.c b/arch/arm/lib/io-shark.c deleted file mode 100644 index 824253948f5..00000000000 --- a/arch/arm/lib/io-shark.c +++ /dev/null @@ -1,13 +0,0 @@ -/* - * linux/arch/arm/lib/io-shark.c - * - * by Alexander Schulz - * - * derived from: - * linux/arch/arm/lib/io-ebsa.S - * Copyright (C) 1995, 1996 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ diff --git a/arch/arm/mach-at91/at91sam9n12.c b/arch/arm/mach-at91/at91sam9n12.c index c7d670d1180..2d895a29773 100644 --- a/arch/arm/mach-at91/at91sam9n12.c +++ b/arch/arm/mach-at91/at91sam9n12.c @@ -169,6 +169,7 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("t0_clk", "f8008000.timer", &tcb_clk), CLKDEV_CON_DEV_ID("t0_clk", "f800c000.timer", &tcb_clk), CLKDEV_CON_DEV_ID("mci_clk", "f0008000.mmc", &mmc_clk), + CLKDEV_CON_DEV_ID(NULL, "f0010000.ssc", &ssc_clk), CLKDEV_CON_DEV_ID("dma_clk", "ffffec00.dma-controller", &dma_clk), CLKDEV_CON_DEV_ID(NULL, "f8010000.i2c", &twi0_clk), CLKDEV_CON_DEV_ID(NULL, "f8014000.i2c", &twi1_clk), diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c index ade948b8266..112e867c4ab 100644 --- a/arch/arm/mach-at91/board-cam60.c +++ b/arch/arm/mach-at91/board-cam60.c @@ -112,7 +112,7 @@ static struct spi_board_info cam60_spi_devices[] __initdata = { /* * MACB Ethernet device */ -static struct __initdata macb_platform_data cam60_macb_data = { +static struct macb_platform_data cam60_macb_data __initdata = { .phy_irq_pin = AT91_PIN_PB5, .is_rmii = 0, }; diff --git a/arch/arm/mach-at91/board-dt-rm9200.c b/arch/arm/mach-at91/board-dt-rm9200.c index 3fcb6623a33..3a185faee79 100644 --- a/arch/arm/mach-at91/board-dt-rm9200.c +++ b/arch/arm/mach-at91/board-dt-rm9200.c @@ -14,7 +14,6 @@ #include <linux/gpio.h> #include <linux/of.h> #include <linux/of_irq.h> -#include <linux/of_platform.h> #include <asm/setup.h> #include <asm/irq.h> @@ -36,11 +35,6 @@ static void __init at91rm9200_dt_init_irq(void) of_irq_init(irq_of_match); } -static void __init at91rm9200_dt_device_init(void) -{ - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); -} - static const char *at91rm9200_dt_board_compat[] __initdata = { "atmel,at91rm9200", NULL @@ -52,6 +46,5 @@ DT_MACHINE_START(at91rm9200_dt, "Atmel AT91RM9200 (Device Tree)") .handle_irq = at91_aic_handle_irq, .init_early = at91rm9200_dt_initialize, .init_irq = at91rm9200_dt_init_irq, - .init_machine = at91rm9200_dt_device_init, .dt_compat = at91rm9200_dt_board_compat, MACHINE_END diff --git a/arch/arm/mach-at91/board-dt-sam9.c b/arch/arm/mach-at91/board-dt-sam9.c index 8db30132abe..3dab868b02f 100644 --- a/arch/arm/mach-at91/board-dt-sam9.c +++ b/arch/arm/mach-at91/board-dt-sam9.c @@ -13,7 +13,6 @@ #include <linux/gpio.h> #include <linux/of.h> #include <linux/of_irq.h> -#include <linux/of_platform.h> #include <asm/setup.h> #include <asm/irq.h> @@ -37,11 +36,6 @@ static void __init at91_dt_init_irq(void) of_irq_init(irq_of_match); } -static void __init at91_dt_device_init(void) -{ - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); -} - static const char *at91_dt_board_compat[] __initdata = { "atmel,at91sam9", NULL @@ -54,6 +48,5 @@ DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM (Device Tree)") .handle_irq = at91_aic_handle_irq, .init_early = at91_dt_initialize, .init_irq = at91_dt_init_irq, - .init_machine = at91_dt_device_init, .dt_compat = at91_dt_board_compat, MACHINE_END diff --git a/arch/arm/mach-at91/include/mach/at91_adc.h b/arch/arm/mach-at91/include/mach/at91_adc.h index 048a57f76bd..c287307b9a3 100644 --- a/arch/arm/mach-at91/include/mach/at91_adc.h +++ b/arch/arm/mach-at91/include/mach/at91_adc.h @@ -60,14 +60,48 @@ #define AT91_ADC_IER 0x24 /* Interrupt Enable Register */ #define AT91_ADC_IDR 0x28 /* Interrupt Disable Register */ #define AT91_ADC_IMR 0x2C /* Interrupt Mask Register */ +#define AT91_ADC_IER_PEN (1 << 29) +#define AT91_ADC_IER_NOPEN (1 << 30) +#define AT91_ADC_IER_XRDY (1 << 20) +#define AT91_ADC_IER_YRDY (1 << 21) +#define AT91_ADC_IER_PRDY (1 << 22) +#define AT91_ADC_ISR_PENS (1 << 31) #define AT91_ADC_CHR(n) (0x30 + ((n) * 4)) /* Channel Data Register N */ #define AT91_ADC_DATA (0x3ff) #define AT91_ADC_CDR0_9X5 (0x50) /* Channel Data Register 0 for 9X5 */ +#define AT91_ADC_ACR 0x94 /* Analog Control Register */ +#define AT91_ADC_ACR_PENDETSENS (0x3 << 0) /* pull-up resistor */ + +#define AT91_ADC_TSMR 0xB0 +#define AT91_ADC_TSMR_TSMODE (3 << 0) /* Touch Screen Mode */ +#define AT91_ADC_TSMR_TSMODE_NONE (0 << 0) +#define AT91_ADC_TSMR_TSMODE_4WIRE_NO_PRESS (1 << 0) +#define AT91_ADC_TSMR_TSMODE_4WIRE_PRESS (2 << 0) +#define AT91_ADC_TSMR_TSMODE_5WIRE (3 << 0) +#define AT91_ADC_TSMR_TSAV (3 << 4) /* Averages samples */ +#define AT91_ADC_TSMR_TSAV_(x) ((x) << 4) +#define AT91_ADC_TSMR_SCTIM (0x0f << 16) /* Switch closure time */ +#define AT91_ADC_TSMR_PENDBC (0x0f << 28) /* Pen Debounce time */ +#define AT91_ADC_TSMR_PENDBC_(x) ((x) << 28) +#define AT91_ADC_TSMR_NOTSDMA (1 << 22) /* No Touchscreen DMA */ +#define AT91_ADC_TSMR_PENDET_DIS (0 << 24) /* Pen contact detection disable */ +#define AT91_ADC_TSMR_PENDET_ENA (1 << 24) /* Pen contact detection enable */ + +#define AT91_ADC_TSXPOSR 0xB4 +#define AT91_ADC_TSYPOSR 0xB8 +#define AT91_ADC_TSPRESSR 0xBC + #define AT91_ADC_TRGR_9260 AT91_ADC_MR #define AT91_ADC_TRGR_9G45 0x08 #define AT91_ADC_TRGR_9X5 0xC0 +/* Trigger Register bit field */ +#define AT91_ADC_TRGR_TRGPER (0xffff << 16) +#define AT91_ADC_TRGR_TRGPER_(x) ((x) << 16) +#define AT91_ADC_TRGR_TRGMOD (0x7 << 0) +#define AT91_ADC_TRGR_MOD_PERIOD_TRIG (5 << 0) + #endif diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig index 69d67f714a2..9fe6d88737e 100644 --- a/arch/arm/mach-bcm/Kconfig +++ b/arch/arm/mach-bcm/Kconfig @@ -1,5 +1,16 @@ config ARCH_BCM - bool "Broadcom SoC" if ARCH_MULTI_V7 + bool "Broadcom SoC Support" + depends on ARCH_MULTIPLATFORM + help + This enables support for Broadcom ARM based SoC + chips + +if ARCH_BCM + +menu "Broadcom SoC Selection" + +config ARCH_BCM_MOBILE + bool "Broadcom Mobile SoC" if ARCH_MULTI_V7 depends on MMU select ARCH_REQUIRE_GPIOLIB select ARM_ERRATA_754322 @@ -9,12 +20,17 @@ config ARCH_BCM select CLKSRC_OF select GENERIC_CLOCKEVENTS select GENERIC_TIME - select GPIO_BCM + select GPIO_BCM_KONA select SPARSE_IRQ select TICK_ONESHOT select CACHE_L2X0 + select HAVE_ARM_ARCH_TIMER help - This enables support for system based on Broadcom SoCs. + This enables support for systems based on Broadcom mobile SoCs. It currently supports the 'BCM281XX' family, which includes BCM11130, BCM11140, BCM11351, BCM28145 and BCM28155 variants. + +endmenu + +endif diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile index e3d03033a7e..c2ccd5a0f77 100644 --- a/arch/arm/mach-bcm/Makefile +++ b/arch/arm/mach-bcm/Makefile @@ -10,6 +10,6 @@ # of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. -obj-$(CONFIG_ARCH_BCM) := board_bcm281xx.o bcm_kona_smc.o bcm_kona_smc_asm.o kona.o +obj-$(CONFIG_ARCH_BCM_MOBILE) := board_bcm281xx.o bcm_kona_smc.o bcm_kona_smc_asm.o kona.o plus_sec := $(call as-instr,.arch_extension sec,+sec) AFLAGS_bcm_kona_smc_asm.o :=-Wa,-march=armv7-a$(plus_sec) diff --git a/arch/arm/mach-bcm/board_bcm281xx.c b/arch/arm/mach-bcm/board_bcm281xx.c index 8d9f931164b..cb3dc364405 100644 --- a/arch/arm/mach-bcm/board_bcm281xx.c +++ b/arch/arm/mach-bcm/board_bcm281xx.c @@ -67,8 +67,7 @@ static void __init board_init(void) static const char * const bcm11351_dt_compat[] = { "brcm,bcm11351", NULL, }; -DT_MACHINE_START(BCM11351_DT, "Broadcom Application Processor") - .init_time = clocksource_of_init, +DT_MACHINE_START(BCM11351_DT, "BCM281xx Broadcom Application Processor") .init_machine = board_init, .restart = bcm_kona_restart, .dt_compat = bcm11351_dt_compat, diff --git a/arch/arm/mach-bcm2835/bcm2835.c b/arch/arm/mach-bcm2835/bcm2835.c index 40686d7ef50..d50135be0c2 100644 --- a/arch/arm/mach-bcm2835/bcm2835.c +++ b/arch/arm/mach-bcm2835/bcm2835.c @@ -18,7 +18,6 @@ #include <linux/of_address.h> #include <linux/of_platform.h> #include <linux/clk/bcm2835.h> -#include <linux/clocksource.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -134,7 +133,6 @@ DT_MACHINE_START(BCM2835, "BCM2835") .init_irq = bcm2835_init_irq, .handle_irq = bcm2835_handle_irq, .init_machine = bcm2835_init, - .init_time = clocksource_of_init, .restart = bcm2835_restart, .dt_compat = bcm2835_compat MACHINE_END diff --git a/arch/arm/mach-clps711x/common.c b/arch/arm/mach-clps711x/common.c index 4ca2f3ca2de..134641d688b 100644 --- a/arch/arm/mach-clps711x/common.c +++ b/arch/arm/mach-clps711x/common.c @@ -29,12 +29,12 @@ #include <linux/clockchips.h> #include <linux/clocksource.h> #include <linux/clk-provider.h> +#include <linux/sched_clock.h> #include <asm/exception.h> #include <asm/mach/irq.h> #include <asm/mach/map.h> #include <asm/mach/time.h> -#include <asm/sched_clock.h> #include <asm/system_misc.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c index c4bdc0a1c36..40f15f133c5 100644 --- a/arch/arm/mach-davinci/board-da830-evm.c +++ b/arch/arm/mach-davinci/board-da830-evm.c @@ -22,17 +22,19 @@ #include <linux/mtd/partitions.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> +#include <linux/platform_data/gpio-davinci.h> +#include <linux/platform_data/mtd-davinci.h> +#include <linux/platform_data/mtd-davinci-aemif.h> +#include <linux/platform_data/spi-davinci.h> +#include <linux/platform_data/usb-davinci.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include <mach/common.h> #include <mach/cp_intc.h> #include <mach/mux.h> -#include <linux/platform_data/mtd-davinci.h> #include <mach/da8xx.h> -#include <linux/platform_data/usb-davinci.h> -#include <linux/platform_data/mtd-davinci-aemif.h> -#include <linux/platform_data/spi-davinci.h> #define DA830_EVM_PHY_ID "" /* @@ -74,7 +76,7 @@ static int da830_evm_usb_ocic_notify(da8xx_ocic_handler_t handler) if (handler != NULL) { da830_evm_usb_ocic_handler = handler; - error = request_irq(irq, da830_evm_usb_ocic_irq, IRQF_DISABLED | + error = request_irq(irq, da830_evm_usb_ocic_irq, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "OHCI over-current indicator", NULL); if (error) @@ -591,6 +593,10 @@ static __init void da830_evm_init(void) struct davinci_soc_info *soc_info = &davinci_soc_info; int ret; + ret = da830_register_gpio(); + if (ret) + pr_warn("da830_evm_init: GPIO init failed: %d\n", ret); + ret = da830_register_edma(da830_edma_rsv); if (ret) pr_warning("da830_evm_init: edma registration failed: %d\n", diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index dd1fb24521a..df16cb88a26 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -28,6 +28,7 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> #include <linux/platform_device.h> +#include <linux/platform_data/gpio-davinci.h> #include <linux/platform_data/mtd-davinci.h> #include <linux/platform_data/mtd-davinci-aemif.h> #include <linux/platform_data/spi-davinci.h> @@ -38,6 +39,7 @@ #include <linux/spi/flash.h> #include <linux/wl12xx.h> +#include <mach/common.h> #include <mach/cp_intc.h> #include <mach/da8xx.h> #include <mach/mux.h> @@ -1437,6 +1439,10 @@ static __init void da850_evm_init(void) { int ret; + ret = da850_register_gpio(); + if (ret) + pr_warn("%s: GPIO init failed: %d\n", __func__, ret); + ret = pmic_tps65070_init(); if (ret) pr_warn("%s: TPS65070 PMIC init failed: %d\n", __func__, ret); diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c index 42b23a3194a..ecdc7d44fa7 100644 --- a/arch/arm/mach-davinci/board-dm355-evm.c +++ b/arch/arm/mach-davinci/board-dm355-evm.c @@ -22,15 +22,17 @@ #include <media/tvp514x.h> #include <linux/spi/spi.h> #include <linux/spi/eeprom.h> +#include <linux/platform_data/gpio-davinci.h> +#include <linux/platform_data/i2c-davinci.h> +#include <linux/platform_data/mtd-davinci.h> +#include <linux/platform_data/mmc-davinci.h> +#include <linux/platform_data/usb-davinci.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <linux/platform_data/i2c-davinci.h> #include <mach/serial.h> -#include <linux/platform_data/mtd-davinci.h> -#include <linux/platform_data/mmc-davinci.h> -#include <linux/platform_data/usb-davinci.h> +#include <mach/common.h> #include "davinci.h" @@ -375,6 +377,11 @@ static struct spi_board_info dm355_evm_spi_info[] __initconst = { static __init void dm355_evm_init(void) { struct clk *aemif; + int ret; + + ret = dm355_gpio_register(); + if (ret) + pr_warn("%s: GPIO init failed: %d\n", __func__, ret); gpio_request(1, "dm9000"); gpio_direction_input(1); diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c index 65a984c52df..43bacbf1531 100644 --- a/arch/arm/mach-davinci/board-dm355-leopard.c +++ b/arch/arm/mach-davinci/board-dm355-leopard.c @@ -19,15 +19,16 @@ #include <linux/clk.h> #include <linux/spi/spi.h> #include <linux/spi/eeprom.h> +#include <linux/platform_data/i2c-davinci.h> +#include <linux/platform_data/mmc-davinci.h> +#include <linux/platform_data/mtd-davinci.h> +#include <linux/platform_data/usb-davinci.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <linux/platform_data/i2c-davinci.h> +#include <mach/common.h> #include <mach/serial.h> -#include <linux/platform_data/mtd-davinci.h> -#include <linux/platform_data/mmc-davinci.h> -#include <linux/platform_data/usb-davinci.h> #include "davinci.h" @@ -234,6 +235,11 @@ static struct spi_board_info dm355_leopard_spi_info[] __initconst = { static __init void dm355_leopard_init(void) { struct clk *aemif; + int ret; + + ret = dm355_gpio_register(); + if (ret) + pr_warn("%s: GPIO init failed: %d\n", __func__, ret); gpio_request(9, "dm9000"); gpio_direction_input(9); diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index 4078ba93776..f4a6c18912e 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -743,6 +743,12 @@ static struct spi_board_info dm365_evm_spi_info[] __initconst = { static __init void dm365_evm_init(void) { + int ret; + + ret = dm365_gpio_register(); + if (ret) + pr_warn("%s: GPIO init failed: %d\n", __func__, ret); + evm_init_i2c(); davinci_serial_init(dm365_serial_device); diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index 40bb9b5b87e..9cc32c283b8 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -754,9 +754,14 @@ static int davinci_phy_fixup(struct phy_device *phydev) static __init void davinci_evm_init(void) { + int ret; struct clk *aemif_clk; struct davinci_soc_info *soc_info = &davinci_soc_info; + ret = dm644x_gpio_register(); + if (ret) + pr_warn("%s: GPIO init failed: %d\n", __func__, ret); + aemif_clk = clk_get(NULL, "aemif"); clk_prepare_enable(aemif_clk); diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index 2bc3651d56c..44b20191a9f 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -33,17 +33,19 @@ #include <linux/mtd/partitions.h> #include <linux/clk.h> #include <linux/export.h> +#include <linux/platform_data/gpio-davinci.h> +#include <linux/platform_data/i2c-davinci.h> +#include <linux/platform_data/mtd-davinci.h> +#include <linux/platform_data/mtd-davinci-aemif.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <mach/common.h> +#include <mach/irqs.h> #include <mach/serial.h> -#include <linux/platform_data/i2c-davinci.h> -#include <linux/platform_data/mtd-davinci.h> #include <mach/clock.h> #include <mach/cdce949.h> -#include <linux/platform_data/mtd-davinci-aemif.h> #include "davinci.h" #include "clock.h" @@ -786,8 +788,13 @@ static struct edma_rsv_info dm646x_edma_rsv[] = { static __init void evm_init(void) { + int ret; struct davinci_soc_info *soc_info = &davinci_soc_info; + ret = dm646x_gpio_register(); + if (ret) + pr_warn("%s: GPIO init failed: %d\n", __func__, ret); + evm_init_i2c(); davinci_serial_init(dm646x_serial_device); dm646x_init_mcasp0(&dm646x_evm_snd_data[0]); diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c index 46f336fca80..bb680af9837 100644 --- a/arch/arm/mach-davinci/board-neuros-osd2.c +++ b/arch/arm/mach-davinci/board-neuros-osd2.c @@ -26,17 +26,18 @@ #include <linux/platform_device.h> #include <linux/gpio.h> #include <linux/mtd/partitions.h> +#include <linux/platform_data/gpio-davinci.h> +#include <linux/platform_data/i2c-davinci.h> +#include <linux/platform_data/mmc-davinci.h> +#include <linux/platform_data/mtd-davinci.h> +#include <linux/platform_data/usb-davinci.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <mach/common.h> -#include <linux/platform_data/i2c-davinci.h> #include <mach/serial.h> #include <mach/mux.h> -#include <linux/platform_data/mtd-davinci.h> -#include <linux/platform_data/mmc-davinci.h> -#include <linux/platform_data/usb-davinci.h> #include "davinci.h" @@ -169,9 +170,14 @@ static struct davinci_mmc_config davinci_ntosd2_mmc_config = { static __init void davinci_ntosd2_init(void) { + int ret; struct clk *aemif_clk; struct davinci_soc_info *soc_info = &davinci_soc_info; + ret = dm644x_gpio_register(); + if (ret) + pr_warn("%s: GPIO init failed: %d\n", __func__, ret); + aemif_clk = clk_get(NULL, "aemif"); clk_prepare_enable(aemif_clk); diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c index ab98c75cabb..2aac51d0e85 100644 --- a/arch/arm/mach-davinci/board-omapl138-hawk.c +++ b/arch/arm/mach-davinci/board-omapl138-hawk.c @@ -13,10 +13,12 @@ #include <linux/init.h> #include <linux/console.h> #include <linux/gpio.h> +#include <linux/platform_data/gpio-davinci.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include <mach/common.h> #include <mach/cp_intc.h> #include <mach/da8xx.h> #include <mach/mux.h> @@ -211,7 +213,7 @@ static int hawk_usb_ocic_notify(da8xx_ocic_handler_t handler) hawk_usb_ocic_handler = handler; error = request_irq(irq, omapl138_hawk_usb_ocic_irq, - IRQF_DISABLED | IRQF_TRIGGER_RISING | + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "OHCI over-current indicator", NULL); if (error) @@ -290,6 +292,10 @@ static __init void omapl138_hawk_init(void) { int ret; + ret = da850_register_gpio(); + if (ret) + pr_warn("%s: GPIO init failed: %d\n", __func__, ret); + davinci_serial_init(da8xx_serial_device); omapl138_hawk_config_emac(); diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c index d6c746e35ad..0813b5167e0 100644 --- a/arch/arm/mach-davinci/da830.c +++ b/arch/arm/mach-davinci/da830.c @@ -11,6 +11,7 @@ #include <linux/gpio.h> #include <linux/init.h> #include <linux/clk.h> +#include <linux/platform_data/gpio-davinci.h> #include <asm/mach/map.h> @@ -20,7 +21,6 @@ #include <mach/common.h> #include <mach/time.h> #include <mach/da8xx.h> -#include <mach/gpio-davinci.h> #include "clock.h" #include "mux.h" @@ -1151,6 +1151,16 @@ static struct davinci_id da830_ids[] = { }, }; +static struct davinci_gpio_platform_data da830_gpio_platform_data = { + .ngpio = 128, + .intc_irq_num = DA830_N_CP_INTC_IRQ, +}; + +int __init da830_register_gpio(void) +{ + return da8xx_register_gpio(&da830_gpio_platform_data); +} + static struct davinci_timer_instance da830_timer_instance[2] = { { .base = DA8XX_TIMER64P0_BASE, @@ -1196,10 +1206,6 @@ static struct davinci_soc_info davinci_soc_info_da830 = { .intc_irq_prios = da830_default_priorities, .intc_irq_num = DA830_N_CP_INTC_IRQ, .timer_info = &da830_timer_info, - .gpio_type = GPIO_TYPE_DAVINCI, - .gpio_base = DA8XX_GPIO_BASE, - .gpio_num = 128, - .gpio_irq = IRQ_DA8XX_GPIO0, .emac_pdata = &da8xx_emac_pdata, }; diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index f56e5fbfa2f..352984e1528 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -17,6 +17,7 @@ #include <linux/platform_device.h> #include <linux/cpufreq.h> #include <linux/regulator/consumer.h> +#include <linux/platform_data/gpio-davinci.h> #include <asm/mach/map.h> @@ -28,7 +29,6 @@ #include <mach/da8xx.h> #include <mach/cpufreq.h> #include <mach/pm.h> -#include <mach/gpio-davinci.h> #include "clock.h" #include "mux.h" @@ -1281,6 +1281,16 @@ int __init da850_register_vpif_capture(struct vpif_capture_config return platform_device_register(&da850_vpif_capture_dev); } +static struct davinci_gpio_platform_data da850_gpio_platform_data = { + .ngpio = 144, + .intc_irq_num = DA850_N_CP_INTC_IRQ, +}; + +int __init da850_register_gpio(void) +{ + return da8xx_register_gpio(&da850_gpio_platform_data); +} + static struct davinci_soc_info davinci_soc_info_da850 = { .io_desc = da850_io_desc, .io_desc_num = ARRAY_SIZE(da850_io_desc), @@ -1298,10 +1308,6 @@ static struct davinci_soc_info davinci_soc_info_da850 = { .intc_irq_prios = da850_default_priorities, .intc_irq_num = DA850_N_CP_INTC_IRQ, .timer_info = &da850_timer_info, - .gpio_type = GPIO_TYPE_DAVINCI, - .gpio_base = DA8XX_GPIO_BASE, - .gpio_num = 144, - .gpio_irq = IRQ_DA8XX_GPIO0, .emac_pdata = &da8xx_emac_pdata, .sram_dma = DA8XX_SHARED_RAM_BASE, .sram_len = SZ_128K, diff --git a/arch/arm/mach-davinci/davinci.h b/arch/arm/mach-davinci/davinci.h index 2ab5d577186..2eebc433880 100644 --- a/arch/arm/mach-davinci/davinci.h +++ b/arch/arm/mach-davinci/davinci.h @@ -53,6 +53,9 @@ extern void __iomem *davinci_sysmod_base; #define DAVINCI_SYSMOD_VIRT(x) (davinci_sysmod_base + (x)) void davinci_map_sysmod(void); +#define DAVINCI_GPIO_BASE 0x01C67000 +int davinci_gpio_register(struct resource *res, int size, void *pdata); + /* DM355 base addresses */ #define DM355_ASYNC_EMIF_CONTROL_BASE 0x01e10000 #define DM355_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 @@ -82,6 +85,7 @@ void dm355_init_spi0(unsigned chipselect_mask, const struct spi_board_info *info, unsigned len); void dm355_init_asp1(u32 evt_enable, struct snd_platform_data *pdata); int dm355_init_video(struct vpfe_config *, struct vpbe_config *); +int dm355_gpio_register(void); /* DM365 function declarations */ void dm365_init(void); @@ -92,11 +96,13 @@ void dm365_init_rtc(void); void dm365_init_spi0(unsigned chipselect_mask, const struct spi_board_info *info, unsigned len); int dm365_init_video(struct vpfe_config *, struct vpbe_config *); +int dm365_gpio_register(void); /* DM644x function declarations */ void dm644x_init(void); void dm644x_init_asp(struct snd_platform_data *pdata); int dm644x_init_video(struct vpfe_config *, struct vpbe_config *); +int dm644x_gpio_register(void); /* DM646x function declarations */ void dm646x_init(void); @@ -106,6 +112,7 @@ int dm646x_init_edma(struct edma_rsv_info *rsv); void dm646x_video_init(void); void dm646x_setup_vpif(struct vpif_display_config *, struct vpif_capture_config *); +int dm646x_gpio_register(void); extern struct platform_device dm365_serial_device[]; extern struct platform_device dm355_serial_device[]; diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index 2e473fefd71..c46eccbbd51 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -665,6 +665,32 @@ int __init da8xx_register_lcdc(struct da8xx_lcdc_platform_data *pdata) return platform_device_register(&da8xx_lcdc_device); } +static struct resource da8xx_gpio_resources[] = { + { /* registers */ + .start = DA8XX_GPIO_BASE, + .end = DA8XX_GPIO_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + { /* interrupt */ + .start = IRQ_DA8XX_GPIO0, + .end = IRQ_DA8XX_GPIO8, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device da8xx_gpio_device = { + .name = "davinci_gpio", + .id = -1, + .num_resources = ARRAY_SIZE(da8xx_gpio_resources), + .resource = da8xx_gpio_resources, +}; + +int __init da8xx_register_gpio(void *pdata) +{ + da8xx_gpio_device.dev.platform_data = pdata; + return platform_device_register(&da8xx_gpio_device); +} + static struct resource da8xx_mmcsd0_resources[] = { { /* registers */ .start = DA8XX_MMCSD0_BASE, diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c index 111573c0aad..3996e98f52f 100644 --- a/arch/arm/mach-davinci/devices.c +++ b/arch/arm/mach-davinci/devices.c @@ -318,6 +318,19 @@ static void davinci_init_wdt(void) platform_device_register(&davinci_wdt_device); } +static struct platform_device davinci_gpio_device = { + .name = "davinci_gpio", + .id = -1, +}; + +int davinci_gpio_register(struct resource *res, int size, void *pdata) +{ + davinci_gpio_device.resource = res; + davinci_gpio_device.num_resources = size; + davinci_gpio_device.dev.platform_data = pdata; + return platform_device_register(&davinci_gpio_device); +} + /*-------------------------------------------------------------------------*/ /*-------------------------------------------------------------------------*/ diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index 3eaa5f6b216..ef9ff1fb6f5 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -13,8 +13,10 @@ #include <linux/serial_8250.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> - #include <linux/spi/spi.h> +#include <linux/platform_data/edma.h> +#include <linux/platform_data/gpio-davinci.h> +#include <linux/platform_data/spi-davinci.h> #include <asm/mach/map.h> @@ -25,9 +27,6 @@ #include <mach/time.h> #include <mach/serial.h> #include <mach/common.h> -#include <linux/platform_data/spi-davinci.h> -#include <mach/gpio-davinci.h> -#include <linux/platform_data/edma.h> #include "davinci.h" #include "clock.h" @@ -886,6 +885,30 @@ static struct platform_device dm355_vpbe_dev = { }, }; +static struct resource dm355_gpio_resources[] = { + { /* registers */ + .start = DAVINCI_GPIO_BASE, + .end = DAVINCI_GPIO_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + { /* interrupt */ + .start = IRQ_DM355_GPIOBNK0, + .end = IRQ_DM355_GPIOBNK6, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct davinci_gpio_platform_data dm355_gpio_platform_data = { + .ngpio = 104, + .intc_irq_num = DAVINCI_N_AINTC_IRQ, +}; + +int __init dm355_gpio_register(void) +{ + return davinci_gpio_register(dm355_gpio_resources, + sizeof(dm355_gpio_resources), + &dm355_gpio_platform_data); +} /*----------------------------------------------------------------------*/ static struct map_desc dm355_io_desc[] = { @@ -1005,10 +1028,6 @@ static struct davinci_soc_info davinci_soc_info_dm355 = { .intc_irq_prios = dm355_default_priorities, .intc_irq_num = DAVINCI_N_AINTC_IRQ, .timer_info = &dm355_timer_info, - .gpio_type = GPIO_TYPE_DAVINCI, - .gpio_base = DAVINCI_GPIO_BASE, - .gpio_num = 104, - .gpio_irq = IRQ_DM355_GPIOBNK0, .sram_dma = 0x00010000, .sram_len = SZ_32K, }; diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index c29e324eb0b..1511a0680f9 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -19,6 +19,9 @@ #include <linux/dma-mapping.h> #include <linux/spi/spi.h> #include <linux/platform_data/edma.h> +#include <linux/platform_data/gpio-davinci.h> +#include <linux/platform_data/keyscan-davinci.h> +#include <linux/platform_data/spi-davinci.h> #include <asm/mach/map.h> @@ -29,9 +32,6 @@ #include <mach/time.h> #include <mach/serial.h> #include <mach/common.h> -#include <linux/platform_data/keyscan-davinci.h> -#include <linux/platform_data/spi-davinci.h> -#include <mach/gpio-davinci.h> #include "davinci.h" #include "clock.h" @@ -698,6 +698,32 @@ void __init dm365_init_spi0(unsigned chipselect_mask, platform_device_register(&dm365_spi0_device); } +static struct resource dm365_gpio_resources[] = { + { /* registers */ + .start = DAVINCI_GPIO_BASE, + .end = DAVINCI_GPIO_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + { /* interrupt */ + .start = IRQ_DM365_GPIO0, + .end = IRQ_DM365_GPIO7, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct davinci_gpio_platform_data dm365_gpio_platform_data = { + .ngpio = 104, + .intc_irq_num = DAVINCI_N_AINTC_IRQ, + .gpio_unbanked = 8, +}; + +int __init dm365_gpio_register(void) +{ + return davinci_gpio_register(dm365_gpio_resources, + sizeof(dm365_gpio_resources), + &dm365_gpio_platform_data); +} + static struct emac_platform_data dm365_emac_pdata = { .ctrl_reg_offset = DM365_EMAC_CNTRL_OFFSET, .ctrl_mod_reg_offset = DM365_EMAC_CNTRL_MOD_OFFSET, @@ -1105,11 +1131,6 @@ static struct davinci_soc_info davinci_soc_info_dm365 = { .intc_irq_prios = dm365_default_priorities, .intc_irq_num = DAVINCI_N_AINTC_IRQ, .timer_info = &dm365_timer_info, - .gpio_type = GPIO_TYPE_DAVINCI, - .gpio_base = DAVINCI_GPIO_BASE, - .gpio_num = 104, - .gpio_irq = IRQ_DM365_GPIO0, - .gpio_unbanked = 8, /* really 16 ... skip muxed GPIOs */ .emac_pdata = &dm365_emac_pdata, .sram_dma = 0x00010000, .sram_len = SZ_32K, diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index 4f74682293d..143a3217e8e 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -13,6 +13,7 @@ #include <linux/serial_8250.h> #include <linux/platform_device.h> #include <linux/platform_data/edma.h> +#include <linux/platform_data/gpio-davinci.h> #include <asm/mach/map.h> @@ -23,7 +24,6 @@ #include <mach/time.h> #include <mach/serial.h> #include <mach/common.h> -#include <mach/gpio-davinci.h> #include "davinci.h" #include "clock.h" @@ -771,6 +771,30 @@ static struct platform_device dm644x_vpbe_dev = { }, }; +static struct resource dm644_gpio_resources[] = { + { /* registers */ + .start = DAVINCI_GPIO_BASE, + .end = DAVINCI_GPIO_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + { /* interrupt */ + .start = IRQ_GPIOBNK0, + .end = IRQ_GPIOBNK4, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct davinci_gpio_platform_data dm644_gpio_platform_data = { + .ngpio = 71, + .intc_irq_num = DAVINCI_N_AINTC_IRQ, +}; + +int __init dm644x_gpio_register(void) +{ + return davinci_gpio_register(dm644_gpio_resources, + sizeof(dm644_gpio_resources), + &dm644_gpio_platform_data); +} /*----------------------------------------------------------------------*/ static struct map_desc dm644x_io_desc[] = { @@ -897,10 +921,6 @@ static struct davinci_soc_info davinci_soc_info_dm644x = { .intc_irq_prios = dm644x_default_priorities, .intc_irq_num = DAVINCI_N_AINTC_IRQ, .timer_info = &dm644x_timer_info, - .gpio_type = GPIO_TYPE_DAVINCI, - .gpio_base = DAVINCI_GPIO_BASE, - .gpio_num = 71, - .gpio_irq = IRQ_GPIOBNK0, .emac_pdata = &dm644x_emac_pdata, .sram_dma = 0x00008000, .sram_len = SZ_16K, diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 68f8d1f1aca..2a73f299c1d 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -14,6 +14,7 @@ #include <linux/serial_8250.h> #include <linux/platform_device.h> #include <linux/platform_data/edma.h> +#include <linux/platform_data/gpio-davinci.h> #include <asm/mach/map.h> @@ -24,7 +25,6 @@ #include <mach/time.h> #include <mach/serial.h> #include <mach/common.h> -#include <mach/gpio-davinci.h> #include "davinci.h" #include "clock.h" @@ -748,6 +748,30 @@ static struct platform_device vpif_capture_dev = { .num_resources = ARRAY_SIZE(vpif_capture_resource), }; +static struct resource dm646x_gpio_resources[] = { + { /* registers */ + .start = DAVINCI_GPIO_BASE, + .end = DAVINCI_GPIO_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + { /* interrupt */ + .start = IRQ_DM646X_GPIOBNK0, + .end = IRQ_DM646X_GPIOBNK2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct davinci_gpio_platform_data dm646x_gpio_platform_data = { + .ngpio = 43, + .intc_irq_num = DAVINCI_N_AINTC_IRQ, +}; + +int __init dm646x_gpio_register(void) +{ + return davinci_gpio_register(dm646x_gpio_resources, + sizeof(dm646x_gpio_resources), + &dm646x_gpio_platform_data); +} /*----------------------------------------------------------------------*/ static struct map_desc dm646x_io_desc[] = { @@ -874,10 +898,6 @@ static struct davinci_soc_info davinci_soc_info_dm646x = { .intc_irq_prios = dm646x_default_priorities, .intc_irq_num = DAVINCI_N_AINTC_IRQ, .timer_info = &dm646x_timer_info, - .gpio_type = GPIO_TYPE_DAVINCI, - .gpio_base = DAVINCI_GPIO_BASE, - .gpio_num = 43, /* Only 33 usable */ - .gpio_irq = IRQ_DM646X_GPIOBNK0, .emac_pdata = &dm646x_emac_pdata, .sram_dma = 0x10010000, .sram_len = SZ_32K, diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index aae53072c0e..39e58b48e82 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -97,6 +97,7 @@ int da8xx_register_mmcsd0(struct davinci_mmc_config *config); int da850_register_mmcsd1(struct davinci_mmc_config *config); void da8xx_register_mcasp(int id, struct snd_platform_data *pdata); int da8xx_register_rtc(void); +int da8xx_register_gpio(void *pdata); int da850_register_cpufreq(char *async_clk); int da8xx_register_cpuidle(void); void __iomem *da8xx_get_mem_ctlr(void); @@ -110,6 +111,8 @@ int da850_register_vpif_capture void da8xx_restart(enum reboot_mode mode, const char *cmd); void da8xx_rproc_reserve_cma(void); int da8xx_register_rproc(void); +int da850_register_gpio(void); +int da830_register_gpio(void); extern struct platform_device da8xx_serial_device[]; extern struct emac_platform_data da8xx_emac_pdata; diff --git a/arch/arm/mach-davinci/include/mach/gpio-davinci.h b/arch/arm/mach-davinci/include/mach/gpio-davinci.h deleted file mode 100644 index 1fdd1fd3544..00000000000 --- a/arch/arm/mach-davinci/include/mach/gpio-davinci.h +++ /dev/null @@ -1,91 +0,0 @@ -/* - * TI DaVinci GPIO Support - * - * Copyright (c) 2006 David Brownell - * Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef __DAVINCI_DAVINCI_GPIO_H -#define __DAVINCI_DAVINCI_GPIO_H - -#include <linux/io.h> -#include <linux/spinlock.h> - -#include <asm-generic/gpio.h> - -#include <mach/irqs.h> -#include <mach/common.h> - -#define DAVINCI_GPIO_BASE 0x01C67000 - -enum davinci_gpio_type { - GPIO_TYPE_DAVINCI = 0, - GPIO_TYPE_TNETV107X, -}; - -/* - * basic gpio routines - * - * board-specific init should be done by arch/.../.../board-XXX.c (maybe - * initializing banks together) rather than boot loaders; kexec() won't - * go through boot loaders. - * - * the gpio clock will be turned on when gpios are used, and you may also - * need to pay attention to PINMUX registers to be sure those pins are - * used as gpios, not with other peripherals. - * - * On-chip GPIOs are numbered 0..(DAVINCI_N_GPIO-1). For documentation, - * and maybe for later updates, code may write GPIO(N). These may be - * all 1.8V signals, all 3.3V ones, or a mix of the two. A given chip - * may not support all the GPIOs in that range. - * - * GPIOs can also be on external chips, numbered after the ones built-in - * to the DaVinci chip. For now, they won't be usable as IRQ sources. - */ -#define GPIO(X) (X) /* 0 <= X <= (DAVINCI_N_GPIO - 1) */ - -/* Convert GPIO signal to GPIO pin number */ -#define GPIO_TO_PIN(bank, gpio) (16 * (bank) + (gpio)) - -struct davinci_gpio_controller { - struct gpio_chip chip; - int irq_base; - spinlock_t lock; - void __iomem *regs; - void __iomem *set_data; - void __iomem *clr_data; - void __iomem *in_data; -}; - -/* The __gpio_to_controller() and __gpio_mask() functions inline to constants - * with constant parameters; or in outlined code they execute at runtime. - * - * You'd access the controller directly when reading or writing more than - * one gpio value at a time, and to support wired logic where the value - * being driven by the cpu need not match the value read back. - * - * These are NOT part of the cross-platform GPIO interface - */ -static inline struct davinci_gpio_controller * -__gpio_to_controller(unsigned gpio) -{ - struct davinci_gpio_controller *ctlrs = davinci_soc_info.gpio_ctlrs; - int index = gpio / 32; - - if (!ctlrs || index >= davinci_soc_info.gpio_ctlrs_num) - return NULL; - - return ctlrs + index; -} - -static inline u32 __gpio_mask(unsigned gpio) -{ - return 1 << (gpio % 32); -} - -#endif /* __DAVINCI_DAVINCI_GPIO_H */ diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h deleted file mode 100644 index 960e9de47e1..00000000000 --- a/arch/arm/mach-davinci/include/mach/gpio.h +++ /dev/null @@ -1,88 +0,0 @@ -/* - * TI DaVinci GPIO Support - * - * Copyright (c) 2006 David Brownell - * Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef __DAVINCI_GPIO_H -#define __DAVINCI_GPIO_H - -#include <asm-generic/gpio.h> - -#define __ARM_GPIOLIB_COMPLEX - -/* The inline versions use the static inlines in the driver header */ -#include "gpio-davinci.h" - -/* - * The get/set/clear functions will inline when called with constant - * parameters referencing built-in GPIOs, for low-overhead bitbanging. - * - * gpio_set_value() will inline only on traditional Davinci style controllers - * with distinct set/clear registers. - * - * Otherwise, calls with variable parameters or referencing external - * GPIOs (e.g. on GPIO expander chips) use outlined functions. - */ -static inline void gpio_set_value(unsigned gpio, int value) -{ - if (__builtin_constant_p(value) && gpio < davinci_soc_info.gpio_num) { - struct davinci_gpio_controller *ctlr; - u32 mask; - - ctlr = __gpio_to_controller(gpio); - - if (ctlr->set_data != ctlr->clr_data) { - mask = __gpio_mask(gpio); - if (value) - __raw_writel(mask, ctlr->set_data); - else - __raw_writel(mask, ctlr->clr_data); - return; - } - } - - __gpio_set_value(gpio, value); -} - -/* Returns zero or nonzero; works for gpios configured as inputs OR - * as outputs, at least for built-in GPIOs. - * - * NOTE: for built-in GPIOs, changes in reported values are synchronized - * to the GPIO clock. This is easily seen after calling gpio_set_value() - * and then immediately gpio_get_value(), where the gpio_get_value() will - * return the old value until the GPIO clock ticks and the new value gets - * latched. - */ -static inline int gpio_get_value(unsigned gpio) -{ - struct davinci_gpio_controller *ctlr; - - if (!__builtin_constant_p(gpio) || gpio >= davinci_soc_info.gpio_num) - return __gpio_get_value(gpio); - - ctlr = __gpio_to_controller(gpio); - return __gpio_mask(gpio) & __raw_readl(ctlr->in_data); -} - -static inline int gpio_cansleep(unsigned gpio) -{ - if (__builtin_constant_p(gpio) && gpio < davinci_soc_info.gpio_num) - return 0; - else - return __gpio_cansleep(gpio); -} - -static inline int irq_to_gpio(unsigned irq) -{ - /* don't support the reverse mapping */ - return -ENOSYS; -} - -#endif /* __DAVINCI_GPIO_H */ diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c index 7a55b5c9597..56c6eb5266a 100644 --- a/arch/arm/mach-davinci/time.c +++ b/arch/arm/mach-davinci/time.c @@ -181,7 +181,7 @@ static struct timer_s timers[] = { .name = "clockevent", .opts = TIMER_OPTS_DISABLED, .irqaction = { - .flags = IRQF_DISABLED | IRQF_TIMER, + .flags = IRQF_TIMER, .handler = timer_interrupt, } }, @@ -190,7 +190,7 @@ static struct timer_s timers[] = { .period = ~0, .opts = TIMER_OPTS_PERIODIC, .irqaction = { - .flags = IRQF_DISABLED | IRQF_TIMER, + .flags = IRQF_TIMER, .handler = freerun_interrupt, } }, @@ -331,7 +331,6 @@ static void davinci_set_mode(enum clock_event_mode mode, static struct clock_event_device clockevent_davinci = { .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .shift = 32, .set_next_event = davinci_set_next_event, .set_mode = davinci_set_mode, }; @@ -397,14 +396,10 @@ void __init davinci_timer_init(void) /* setup clockevent */ clockevent_davinci.name = id_to_name[timers[TID_CLOCKEVENT].id]; - clockevent_davinci.mult = div_sc(davinci_clock_tick_rate, NSEC_PER_SEC, - clockevent_davinci.shift); - clockevent_davinci.max_delta_ns = - clockevent_delta2ns(0xfffffffe, &clockevent_davinci); - clockevent_davinci.min_delta_ns = 50000; /* 50 usec */ clockevent_davinci.cpumask = cpumask_of(0); - clockevents_register_device(&clockevent_davinci); + clockevents_config_and_register(&clockevent_davinci, + davinci_clock_tick_rate, 1, 0xfffffffe); for (i=0; i< ARRAY_SIZE(timers); i++) timer32_config(&timers[i]); diff --git a/arch/arm/mach-dove/board-dt.c b/arch/arm/mach-dove/board-dt.c index 49f72a84842..49fa9abd09d 100644 --- a/arch/arm/mach-dove/board-dt.c +++ b/arch/arm/mach-dove/board-dt.c @@ -10,54 +10,15 @@ #include <linux/init.h> #include <linux/clk-provider.h> -#include <linux/clocksource.h> -#include <linux/irqchip.h> #include <linux/of.h> #include <linux/of_platform.h> -#include <linux/platform_data/usb-ehci-orion.h> #include <asm/hardware/cache-tauros2.h> #include <asm/mach/arch.h> #include <mach/dove.h> #include <mach/pm.h> #include <plat/common.h> -#include <plat/irq.h> #include "common.h" -/* - * There are still devices that doesn't even know about DT, - * get clock gates here and add a clock lookup. - */ -static void __init dove_legacy_clk_init(void) -{ - struct device_node *np = of_find_compatible_node(NULL, NULL, - "marvell,dove-gating-clock"); - struct of_phandle_args clkspec; - - clkspec.np = np; - clkspec.args_count = 1; - - clkspec.args[0] = CLOCK_GATING_BIT_PCIE0; - orion_clkdev_add("0", "pcie", - of_clk_get_from_provider(&clkspec)); - - clkspec.args[0] = CLOCK_GATING_BIT_PCIE1; - orion_clkdev_add("1", "pcie", - of_clk_get_from_provider(&clkspec)); -} - -static void __init dove_dt_time_init(void) -{ - of_clk_init(NULL); - clocksource_of_init(); -} - -static void __init dove_dt_init_early(void) -{ - mvebu_mbus_init("marvell,dove-mbus", - BRIDGE_WINS_BASE, BRIDGE_WINS_SZ, - DOVE_MC_WINS_BASE, DOVE_MC_WINS_SZ); -} - static void __init dove_dt_init(void) { pr_info("Dove 88AP510 SoC\n"); @@ -65,14 +26,7 @@ static void __init dove_dt_init(void) #ifdef CONFIG_CACHE_TAUROS2 tauros2_init(0); #endif - dove_setup_cpu_wins(); - - /* Setup clocks for legacy devices */ - dove_legacy_clk_init(); - - /* Internal devices not ported to DT yet */ - dove_pcie_init(1, 1); - + BUG_ON(mvebu_mbus_dt_init()); of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } @@ -83,8 +37,6 @@ static const char * const dove_dt_board_compat[] = { DT_MACHINE_START(DOVE_DT, "Marvell Dove (Flattened Device Tree)") .map_io = dove_map_io, - .init_early = dove_dt_init_early, - .init_time = dove_dt_time_init, .init_machine = dove_dt_init, .restart = dove_restart, .dt_compat = dove_dt_board_compat, diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c index c95dbce2468..39ef3b61391 100644 --- a/arch/arm/mach-ep93xx/clock.c +++ b/arch/arm/mach-ep93xx/clock.c @@ -212,7 +212,7 @@ static struct clk_lookup clocks[] = { INIT_CK(NULL, "hclk", &clk_h), INIT_CK(NULL, "apb_pclk", &clk_p), INIT_CK(NULL, "pll2", &clk_pll2), - INIT_CK("ep93xx-ohci", NULL, &clk_usb_host), + INIT_CK("ohci-platform", NULL, &clk_usb_host), INIT_CK("ep93xx-keypad", NULL, &clk_keypad), INIT_CK("ep93xx-fb", NULL, &clk_video), INIT_CK("ep93xx-spi.0", NULL, &clk_spi), diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 3f12b885c08..d95ee28a616 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -36,6 +36,7 @@ #include <linux/export.h> #include <linux/irqchip/arm-vic.h> #include <linux/reboot.h> +#include <linux/usb/ohci_pdriver.h> #include <mach/hardware.h> #include <linux/platform_data/video-ep93xx.h> @@ -297,25 +298,53 @@ static struct platform_device ep93xx_rtc_device = { .resource = ep93xx_rtc_resource, }; +/************************************************************************* + * EP93xx OHCI USB Host + *************************************************************************/ + +static struct clk *ep93xx_ohci_host_clock; + +static int ep93xx_ohci_power_on(struct platform_device *pdev) +{ + if (!ep93xx_ohci_host_clock) { + ep93xx_ohci_host_clock = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(ep93xx_ohci_host_clock)) + return PTR_ERR(ep93xx_ohci_host_clock); + } + + return clk_enable(ep93xx_ohci_host_clock); +} + +static void ep93xx_ohci_power_off(struct platform_device *pdev) +{ + clk_disable(ep93xx_ohci_host_clock); +} + +static struct usb_ohci_pdata ep93xx_ohci_pdata = { + .power_on = ep93xx_ohci_power_on, + .power_off = ep93xx_ohci_power_off, + .power_suspend = ep93xx_ohci_power_off, +}; static struct resource ep93xx_ohci_resources[] = { DEFINE_RES_MEM(EP93XX_USB_PHYS_BASE, 0x1000), DEFINE_RES_IRQ(IRQ_EP93XX_USB), }; +static u64 ep93xx_ohci_dma_mask = DMA_BIT_MASK(32); static struct platform_device ep93xx_ohci_device = { - .name = "ep93xx-ohci", + .name = "ohci-platform", .id = -1, + .num_resources = ARRAY_SIZE(ep93xx_ohci_resources), + .resource = ep93xx_ohci_resources, .dev = { - .dma_mask = &ep93xx_ohci_device.dev.coherent_dma_mask, + .dma_mask = &ep93xx_ohci_dma_mask, .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &ep93xx_ohci_pdata, }, - .num_resources = ARRAY_SIZE(ep93xx_ohci_resources), - .resource = ep93xx_ohci_resources, }; - /************************************************************************* * EP93xx physmap'ed flash *************************************************************************/ diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 56fe819ee10..f9d67a0acb2 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -14,19 +14,28 @@ menu "SAMSUNG EXYNOS SoCs Support" config ARCH_EXYNOS4 bool "SAMSUNG EXYNOS4" default y + select ARM_AMBA + select CLKSRC_OF + select CLKSRC_SAMSUNG_PWM if CPU_EXYNOS4210 + select CPU_EXYNOS4210 select GIC_NON_BANKED + select KEYBOARD_SAMSUNG if INPUT_KEYBOARD select HAVE_ARM_SCU if SMP select HAVE_SMP select MIGHT_HAVE_CACHE_L2X0 select PINCTRL + select S5P_DEV_MFC help Samsung EXYNOS4 SoCs based systems config ARCH_EXYNOS5 bool "SAMSUNG EXYNOS5" + select ARM_AMBA + select CLKSRC_OF select HAVE_ARM_SCU if SMP select HAVE_SMP select PINCTRL + select USB_ARCH_HAS_XHCI help Samsung EXYNOS5 (Cortex-A15) SoC based systems @@ -110,35 +119,6 @@ config SOC_EXYNOS5440 help Enable EXYNOS5440 SoC support -comment "Flattened Device Tree based board for EXYNOS SoCs" - -config MACH_EXYNOS4_DT - bool "Samsung Exynos4 Machine using device tree" - default y - depends on ARCH_EXYNOS4 - select ARM_AMBA - select CLKSRC_OF - select CLKSRC_SAMSUNG_PWM if CPU_EXYNOS4210 - select CPU_EXYNOS4210 - select KEYBOARD_SAMSUNG if INPUT_KEYBOARD - select S5P_DEV_MFC - help - Machine support for Samsung Exynos4 machine with device tree enabled. - Select this if a fdt blob is available for the Exynos4 SoC based board. - Note: This is under development and not all peripherals can be supported - with this machine file. - -config MACH_EXYNOS5_DT - bool "SAMSUNG EXYNOS5 Machine using device tree" - default y - depends on ARCH_EXYNOS5 - select ARM_AMBA - select CLKSRC_OF - select USB_ARCH_HAS_XHCI - help - Machine support for Samsung EXYNOS5 machine with device tree enabled. - Select this if a fdt blob is available for the EXYNOS5 SoC based board. - endmenu endif diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile index 53696154aea..8930b66b4ab 100644 --- a/arch/arm/mach-exynos/Makefile +++ b/arch/arm/mach-exynos/Makefile @@ -32,5 +32,5 @@ AFLAGS_exynos-smc.o :=-Wa,-march=armv7-a$(plus_sec) # machine support -obj-$(CONFIG_MACH_EXYNOS4_DT) += mach-exynos4-dt.o -obj-$(CONFIG_MACH_EXYNOS5_DT) += mach-exynos5-dt.o +obj-$(CONFIG_ARCH_EXYNOS4) += mach-exynos4-dt.o +obj-$(CONFIG_ARCH_EXYNOS5) += mach-exynos5-dt.o diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index ba95e5db250..a4e7ba82881 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -26,8 +26,6 @@ #include <linux/export.h> #include <linux/irqdomain.h> #include <linux/of_address.h> -#include <linux/clocksource.h> -#include <linux/clk-provider.h> #include <linux/irqchip/arm-gic.h> #include <linux/irqchip/chained_irq.h> @@ -367,12 +365,6 @@ static void __init exynos5_map_io(void) iotable_init(exynos5250_iodesc, ARRAY_SIZE(exynos5250_iodesc)); } -void __init exynos_init_time(void) -{ - of_clk_init(NULL); - clocksource_of_init(); -} - struct bus_type exynos_subsys = { .name = "exynos-core", .dev_name = "exynos-core", diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h index 8646a141ae4..f0fa2050d08 100644 --- a/arch/arm/mach-exynos/common.h +++ b/arch/arm/mach-exynos/common.h @@ -16,7 +16,6 @@ #include <linux/of.h> void mct_init(void __iomem *base, int irq_g0, int irq_l0, int irq_l1); -void exynos_init_time(void); struct map_desc; void exynos_init_io(void); diff --git a/arch/arm/mach-exynos/include/mach/regs-pmu.h b/arch/arm/mach-exynos/include/mach/regs-pmu.h index 57344b7e98c..2cdb63e8ce5 100644 --- a/arch/arm/mach-exynos/include/mach/regs-pmu.h +++ b/arch/arm/mach-exynos/include/mach/regs-pmu.h @@ -44,11 +44,6 @@ #define S5P_DAC_PHY_CONTROL S5P_PMUREG(0x070C) #define S5P_DAC_PHY_ENABLE (1 << 0) -#define S5P_MIPI_DPHY_CONTROL(n) S5P_PMUREG(0x0710 + (n) * 4) -#define S5P_MIPI_DPHY_ENABLE (1 << 0) -#define S5P_MIPI_DPHY_SRESETN (1 << 1) -#define S5P_MIPI_DPHY_MRESETN (1 << 2) - #define S5P_INFORM0 S5P_PMUREG(0x0800) #define S5P_INFORM1 S5P_PMUREG(0x0804) #define S5P_INFORM2 S5P_PMUREG(0x0808) diff --git a/arch/arm/mach-exynos/mach-exynos4-dt.c b/arch/arm/mach-exynos/mach-exynos4-dt.c index 0099c6c13bb..4b8f6e2ca16 100644 --- a/arch/arm/mach-exynos/mach-exynos4-dt.c +++ b/arch/arm/mach-exynos/mach-exynos4-dt.c @@ -11,12 +11,8 @@ * published by the Free Software Foundation. */ -#include <linux/kernel.h> #include <linux/of_platform.h> #include <linux/of_fdt.h> -#include <linux/serial_core.h> -#include <linux/memblock.h> -#include <linux/clocksource.h> #include <asm/mach/arch.h> #include <plat/mfc.h> @@ -54,7 +50,6 @@ DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)") .init_early = exynos_firmware_init, .init_machine = exynos4_dt_machine_init, .init_late = exynos_init_late, - .init_time = exynos_init_time, .dt_compat = exynos4_dt_compat, .restart = exynos4_restart, .reserve = exynos4_reserve, diff --git a/arch/arm/mach-exynos/mach-exynos5-dt.c b/arch/arm/mach-exynos/mach-exynos5-dt.c index f874b773ca1..7976ab33319 100644 --- a/arch/arm/mach-exynos/mach-exynos5-dt.c +++ b/arch/arm/mach-exynos/mach-exynos5-dt.c @@ -11,14 +11,10 @@ #include <linux/of_platform.h> #include <linux/of_fdt.h> -#include <linux/memblock.h> #include <linux/io.h> -#include <linux/clocksource.h> #include <asm/mach/arch.h> #include <mach/regs-pmu.h> - -#include <plat/cpu.h> #include <plat/mfc.h> #include "common.h" @@ -76,7 +72,6 @@ DT_MACHINE_START(EXYNOS5_DT, "SAMSUNG EXYNOS5 (Flattened Device Tree)") .map_io = exynos_init_io, .init_machine = exynos5_dt_machine_init, .init_late = exynos_init_late, - .init_time = exynos_init_time, .dt_compat = exynos5_dt_compat, .restart = exynos5_restart, .reserve = exynos5_reserve, diff --git a/arch/arm/mach-gemini/time.c b/arch/arm/mach-gemini/time.c index 21dc5a89d1c..0a63c4d25b6 100644 --- a/arch/arm/mach-gemini/time.c +++ b/arch/arm/mach-gemini/time.c @@ -13,6 +13,8 @@ #include <mach/hardware.h> #include <mach/global_reg.h> #include <asm/mach/time.h> +#include <linux/clockchips.h> +#include <linux/clocksource.h> /* * Register definitions for the timers @@ -33,19 +35,89 @@ #define TIMER_3_CR_CLOCK (1 << 7) #define TIMER_3_CR_INT (1 << 8) +static unsigned int tick_rate; + +static int gemini_timer_set_next_event(unsigned long cycles, + struct clock_event_device *evt) +{ + u32 cr; + + cr = readl(TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE))); + + /* This may be overdoing it, feel free to test without this */ + cr &= ~TIMER_2_CR_ENABLE; + cr &= ~TIMER_2_CR_INT; + writel(cr, TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE))); + + /* Set next event */ + writel(cycles, TIMER_COUNT(IO_ADDRESS(GEMINI_TIMER2_BASE))); + writel(cycles, TIMER_LOAD(IO_ADDRESS(GEMINI_TIMER2_BASE))); + cr |= TIMER_2_CR_ENABLE; + cr |= TIMER_2_CR_INT; + writel(cr, TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE))); + + return 0; +} + +static void gemini_timer_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + u32 period = DIV_ROUND_CLOSEST(tick_rate, HZ); + u32 cr; + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + /* Start the timer */ + writel(period, + TIMER_COUNT(IO_ADDRESS(GEMINI_TIMER2_BASE))); + writel(period, + TIMER_LOAD(IO_ADDRESS(GEMINI_TIMER2_BASE))); + cr = readl(TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE))); + cr |= TIMER_2_CR_ENABLE; + cr |= TIMER_2_CR_INT; + writel(cr, TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE))); + break; + case CLOCK_EVT_MODE_ONESHOT: + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + case CLOCK_EVT_MODE_RESUME: + /* + * Disable also for oneshot: the set_next() call will + * arm the timer instead. + */ + cr = readl(TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE))); + cr &= ~TIMER_2_CR_ENABLE; + cr &= ~TIMER_2_CR_INT; + writel(cr, TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE))); + break; + default: + break; + } +} + +/* Use TIMER2 as clock event */ +static struct clock_event_device gemini_clockevent = { + .name = "TIMER2", + .rating = 300, /* Reasonably fast and accurate clock event */ + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .set_next_event = gemini_timer_set_next_event, + .set_mode = gemini_timer_set_mode, +}; + /* * IRQ handler for the timer */ static irqreturn_t gemini_timer_interrupt(int irq, void *dev_id) { - timer_tick(); + struct clock_event_device *evt = &gemini_clockevent; + evt->event_handler(evt); return IRQ_HANDLED; } static struct irqaction gemini_timer_irq = { .name = "Gemini Timer Tick", - .flags = IRQF_DISABLED | IRQF_TIMER, + .flags = IRQF_TIMER, .handler = gemini_timer_interrupt, }; @@ -54,9 +126,9 @@ static struct irqaction gemini_timer_irq = { */ void __init gemini_timer_init(void) { - unsigned int tick_rate, reg_v; + u32 reg_v; - reg_v = __raw_readl(IO_ADDRESS(GEMINI_GLOBAL_BASE + GLOBAL_STATUS)); + reg_v = readl(IO_ADDRESS(GEMINI_GLOBAL_BASE + GLOBAL_STATUS)); tick_rate = REG_TO_AHB_SPEED(reg_v) * 1000000; printk(KERN_INFO "Bus: %dMHz", tick_rate / 1000000); @@ -82,8 +154,17 @@ void __init gemini_timer_init(void) * Make irqs happen for the system timer */ setup_irq(IRQ_TIMER2, &gemini_timer_irq); - /* Start the timer */ - __raw_writel(tick_rate / HZ, TIMER_COUNT(IO_ADDRESS(GEMINI_TIMER2_BASE))); - __raw_writel(tick_rate / HZ, TIMER_LOAD(IO_ADDRESS(GEMINI_TIMER2_BASE))); - __raw_writel(TIMER_2_CR_ENABLE | TIMER_2_CR_INT, TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE))); + + /* Enable and use TIMER1 as clock source */ + writel(0xffffffff, TIMER_COUNT(IO_ADDRESS(GEMINI_TIMER1_BASE))); + writel(0xffffffff, TIMER_LOAD(IO_ADDRESS(GEMINI_TIMER1_BASE))); + writel(TIMER_1_CR_ENABLE, TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE))); + if (clocksource_mmio_init(TIMER_COUNT(IO_ADDRESS(GEMINI_TIMER1_BASE)), + "TIMER1", tick_rate, 300, 32, + clocksource_mmio_readl_up)) + pr_err("timer: failed to initialize gemini clock source\n"); + + /* Configure and register the clockevent */ + clockevents_config_and_register(&gemini_clockevent, tick_rate, + 1, 0xffffffff); } diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig index 8e8437dea3c..fe98df44579 100644 --- a/arch/arm/mach-highbank/Kconfig +++ b/arch/arm/mach-highbank/Kconfig @@ -10,9 +10,9 @@ config ARCH_HIGHBANK select ARM_ERRATA_775420 select ARM_ERRATA_798181 select ARM_GIC + select ARM_PSCI select ARM_TIMER_SP804 select CACHE_L2X0 - select CLKDEV_LOOKUP select COMMON_CLK select CPU_V7 select GENERIC_CLOCKEVENTS diff --git a/arch/arm/mach-highbank/Makefile b/arch/arm/mach-highbank/Makefile index 8a1ef576d79..55840f414d3 100644 --- a/arch/arm/mach-highbank/Makefile +++ b/arch/arm/mach-highbank/Makefile @@ -3,6 +3,4 @@ obj-y := highbank.o system.o smc.o plus_sec := $(call as-instr,.arch_extension sec,+sec) AFLAGS_smc.o :=-Wa,-march=armv7-a$(plus_sec) -obj-$(CONFIG_SMP) += platsmp.o -obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o obj-$(CONFIG_PM_SLEEP) += pm.o diff --git a/arch/arm/mach-highbank/core.h b/arch/arm/mach-highbank/core.h index aea1ec5ab6f..7ec5edcd133 100644 --- a/arch/arm/mach-highbank/core.h +++ b/arch/arm/mach-highbank/core.h @@ -3,7 +3,6 @@ #include <linux/reboot.h> -extern void highbank_set_cpu_jump(int cpu, void *jump_addr); extern void highbank_restart(enum reboot_mode, const char *); extern void __iomem *scu_base_addr; @@ -14,8 +13,5 @@ static inline void highbank_pm_init(void) {} #endif extern void highbank_smc1(int fn, int arg); -extern void highbank_cpu_die(unsigned int cpu); - -extern struct smp_operations highbank_smp_ops; #endif diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c index 8e63ccdb0de..b3d7e5634b8 100644 --- a/arch/arm/mach-highbank/highbank.c +++ b/arch/arm/mach-highbank/highbank.c @@ -24,11 +24,9 @@ #include <linux/of_platform.h> #include <linux/of_address.h> #include <linux/amba/bus.h> -#include <linux/clk-provider.h> +#include <linux/platform_device.h> -#include <asm/cacheflush.h> -#include <asm/cputype.h> -#include <asm/smp_plat.h> +#include <asm/psci.h> #include <asm/hardware/cache-l2x0.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -49,17 +47,6 @@ static void __init highbank_scu_map_io(void) scu_base_addr = ioremap(base, SZ_4K); } -#define HB_JUMP_TABLE_PHYS(cpu) (0x40 + (0x10 * (cpu))) -#define HB_JUMP_TABLE_VIRT(cpu) phys_to_virt(HB_JUMP_TABLE_PHYS(cpu)) - -void highbank_set_cpu_jump(int cpu, void *jump_addr) -{ - cpu = MPIDR_AFFINITY_LEVEL(cpu_logical_map(cpu), 0); - writel(virt_to_phys(jump_addr), HB_JUMP_TABLE_VIRT(cpu)); - __cpuc_flush_dcache_area(HB_JUMP_TABLE_VIRT(cpu), 16); - outer_clean_range(HB_JUMP_TABLE_PHYS(cpu), - HB_JUMP_TABLE_PHYS(cpu) + 15); -} static void highbank_l2x0_disable(void) { @@ -83,20 +70,6 @@ static void __init highbank_init_irq(void) } } -static void __init highbank_timer_init(void) -{ - struct device_node *np; - - /* Map system registers */ - np = of_find_compatible_node(NULL, NULL, "calxeda,hb-sregs"); - sregs_base = of_iomap(np, 0); - WARN_ON(!sregs_base); - - of_clk_init(NULL); - - clocksource_of_init(); -} - static void highbank_power_off(void) { highbank_set_pwr_shutdown(); @@ -153,8 +126,19 @@ static struct notifier_block highbank_platform_nb = { .notifier_call = highbank_platform_notifier, }; +static struct platform_device highbank_cpuidle_device = { + .name = "cpuidle-calxeda", +}; + static void __init highbank_init(void) { + struct device_node *np; + + /* Map system registers */ + np = of_find_compatible_node(NULL, NULL, "calxeda,hb-sregs"); + sregs_base = of_iomap(np, 0); + WARN_ON(!sregs_base); + pm_power_off = highbank_power_off; highbank_pm_init(); @@ -162,6 +146,9 @@ static void __init highbank_init(void) bus_register_notifier(&amba_bustype, &highbank_amba_nb); of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); + + if (psci_ops.cpu_suspend) + platform_device_register(&highbank_cpuidle_device); } static const char *highbank_match[] __initconst = { @@ -174,9 +161,7 @@ DT_MACHINE_START(HIGHBANK, "Highbank") #if defined(CONFIG_ZONE_DMA) && defined(CONFIG_ARM_LPAE) .dma_zone_size = (4ULL * SZ_1G), #endif - .smp = smp_ops(highbank_smp_ops), .init_irq = highbank_init_irq, - .init_time = highbank_timer_init, .init_machine = highbank_init, .dt_compat = highbank_match, .restart = highbank_restart, diff --git a/arch/arm/mach-highbank/hotplug.c b/arch/arm/mach-highbank/hotplug.c deleted file mode 100644 index a019e4e86e5..00000000000 --- a/arch/arm/mach-highbank/hotplug.c +++ /dev/null @@ -1,37 +0,0 @@ -/* - * Copyright 2011 Calxeda, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program. If not, see <http://www.gnu.org/licenses/>. - */ -#include <linux/kernel.h> -#include <asm/cacheflush.h> - -#include "core.h" -#include "sysregs.h" - -extern void secondary_startup(void); - -/* - * platform-specific code to shutdown a CPU - * - */ -void __ref highbank_cpu_die(unsigned int cpu) -{ - highbank_set_cpu_jump(cpu, phys_to_virt(0)); - - flush_cache_louis(); - highbank_set_core_pwr(); - - while (1) - cpu_do_idle(); -} diff --git a/arch/arm/mach-highbank/platsmp.c b/arch/arm/mach-highbank/platsmp.c deleted file mode 100644 index 32d75cf55cb..00000000000 --- a/arch/arm/mach-highbank/platsmp.c +++ /dev/null @@ -1,68 +0,0 @@ -/* - * Copyright 2010-2011 Calxeda, Inc. - * Based on platsmp.c, Copyright (C) 2002 ARM Ltd. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program. If not, see <http://www.gnu.org/licenses/>. - */ -#include <linux/init.h> -#include <linux/smp.h> -#include <linux/io.h> - -#include <asm/smp_scu.h> - -#include "core.h" - -extern void secondary_startup(void); - -static int highbank_boot_secondary(unsigned int cpu, struct task_struct *idle) -{ - highbank_set_cpu_jump(cpu, secondary_startup); - arch_send_wakeup_ipi_mask(cpumask_of(cpu)); - return 0; -} - -/* - * Initialise the CPU possible map early - this describes the CPUs - * which may be present or become present in the system. - */ -static void __init highbank_smp_init_cpus(void) -{ - unsigned int i, ncores = 4; - - /* sanity check */ - if (ncores > NR_CPUS) { - printk(KERN_WARNING - "highbank: no. of cores (%d) greater than configured " - "maximum of %d - clipping\n", - ncores, NR_CPUS); - ncores = NR_CPUS; - } - - for (i = 0; i < ncores; i++) - set_cpu_possible(i, true); -} - -static void __init highbank_smp_prepare_cpus(unsigned int max_cpus) -{ - if (scu_base_addr) - scu_enable(scu_base_addr); -} - -struct smp_operations highbank_smp_ops __initdata = { - .smp_init_cpus = highbank_smp_init_cpus, - .smp_prepare_cpus = highbank_smp_prepare_cpus, - .smp_boot_secondary = highbank_boot_secondary, -#ifdef CONFIG_HOTPLUG_CPU - .cpu_die = highbank_cpu_die, -#endif -}; diff --git a/arch/arm/mach-highbank/pm.c b/arch/arm/mach-highbank/pm.c index 04eddb4f438..7f2bd85eb93 100644 --- a/arch/arm/mach-highbank/pm.c +++ b/arch/arm/mach-highbank/pm.c @@ -16,27 +16,19 @@ #include <linux/cpu_pm.h> #include <linux/init.h> -#include <linux/io.h> #include <linux/suspend.h> -#include <asm/cacheflush.h> -#include <asm/proc-fns.h> #include <asm/suspend.h> - -#include "core.h" -#include "sysregs.h" +#include <asm/psci.h> static int highbank_suspend_finish(unsigned long val) { - outer_flush_all(); - outer_disable(); - - highbank_set_pwr_suspend(); - - cpu_do_idle(); + const struct psci_power_state ps = { + .type = PSCI_POWER_STATE_TYPE_POWER_DOWN, + .affinity_level = 1, + }; - highbank_clear_pwr_request(); - return 0; + return psci_ops.cpu_suspend(ps, __pa(cpu_resume)); } static int highbank_pm_enter(suspend_state_t state) @@ -44,15 +36,11 @@ static int highbank_pm_enter(suspend_state_t state) cpu_pm_enter(); cpu_cluster_pm_enter(); - highbank_set_cpu_jump(0, cpu_resume); cpu_suspend(0, highbank_suspend_finish); cpu_cluster_pm_exit(); cpu_pm_exit(); - highbank_smc1(0x102, 0x1); - if (scu_base_addr) - scu_enable(scu_base_addr); return 0; } @@ -63,5 +51,8 @@ static const struct platform_suspend_ops highbank_pm_ops = { void __init highbank_pm_init(void) { + if (!psci_ops.cpu_suspend) + return; + suspend_set_ops(&highbank_pm_ops); } diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 29a8af6922a..7a6e6f71006 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -4,13 +4,14 @@ config ARCH_MXC select ARM_CPU_SUSPEND if PM select ARM_PATCH_PHYS_VIRT select AUTO_ZRELADDR if !ZBOOT_ROM - select CLKDEV_LOOKUP select CLKSRC_MMIO + select COMMON_CLK select GENERIC_ALLOCATOR select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP select MIGHT_HAVE_CACHE_L2X0 if ARCH_MULTI_V6_V7 select MULTI_IRQ_HANDLER + select SOC_BUS select SPARSE_IRQ select USE_OF help @@ -24,7 +25,7 @@ config MXC_IRQ_PRIOR help Select this if you want to use prioritized IRQ handling. This feature prevents higher priority ISR to be interrupted - by lower priority IRQ even IRQF_DISABLED flag is not set. + by lower priority IRQ. This may be useful in embedded applications, where are strong requirements for timing. Say N here, unless you have a specialized requirement. @@ -92,14 +93,12 @@ config MACH_MX27 config SOC_IMX1 bool select ARCH_MX1 - select COMMON_CLK select CPU_ARM920T select IMX_HAVE_IOMUX_V1 select MXC_AVIC config SOC_IMX21 bool - select COMMON_CLK select CPU_ARM926T select IMX_HAVE_IOMUX_V1 select MXC_AVIC @@ -108,7 +107,6 @@ config SOC_IMX25 bool select ARCH_MX25 select ARCH_MXC_IOMUX_V3 - select COMMON_CLK select CPU_ARM926T select MXC_AVIC @@ -116,7 +114,6 @@ config SOC_IMX27 bool select ARCH_HAS_CPUFREQ select ARCH_HAS_OPP - select COMMON_CLK select CPU_ARM926T select IMX_HAVE_IOMUX_V1 select MACH_MX27 @@ -124,7 +121,6 @@ config SOC_IMX27 config SOC_IMX31 bool - select COMMON_CLK select CPU_V6 select IMX_HAVE_PLATFORM_MXC_RNGA select MXC_AVIC @@ -133,7 +129,6 @@ config SOC_IMX31 config SOC_IMX35 bool select ARCH_MXC_IOMUX_V3 - select COMMON_CLK select CPU_V6K select HAVE_EPIT select MXC_AVIC @@ -144,7 +139,6 @@ config SOC_IMX5 select ARCH_HAS_CPUFREQ select ARCH_HAS_OPP select ARCH_MXC_IOMUX_V3 - select COMMON_CLK select CPU_V7 select MXC_TZIC @@ -791,7 +785,6 @@ config SOC_IMX6Q select ARM_ERRATA_764369 if SMP select ARM_ERRATA_775420 select ARM_GIC - select COMMON_CLK select CPU_V7 select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP @@ -801,6 +794,8 @@ config SOC_IMX6Q select HAVE_IMX_SRC select HAVE_SMP select MFD_SYSCON + select MIGHT_HAVE_PCI + select PCI_DOMAINS if PCI select PINCTRL select PINCTRL_IMX6Q select PL310_ERRATA_588369 if CACHE_PL310 diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 5383c589ad7..bbe1f5bb799 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -102,6 +102,8 @@ obj-$(CONFIG_SOC_IMX6SL) += clk-imx6sl.o mach-imx6sl.o ifeq ($(CONFIG_PM),y) obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o headsmp.o +# i.MX6SL reuses pm-imx6q.c +obj-$(CONFIG_SOC_IMX6SL) += pm-imx6q.o endif # i.MX5 based machines diff --git a/arch/arm/mach-imx/anatop.c b/arch/arm/mach-imx/anatop.c index ad3b755abb7..4a40bbb4618 100644 --- a/arch/arm/mach-imx/anatop.c +++ b/arch/arm/mach-imx/anatop.c @@ -16,6 +16,7 @@ #include <linux/mfd/syscon.h> #include <linux/regmap.h> #include "common.h" +#include "hardware.h" #define REG_SET 0x4 #define REG_CLR 0x8 @@ -26,6 +27,7 @@ #define ANADIG_USB1_CHRG_DETECT 0x1b0 #define ANADIG_USB2_CHRG_DETECT 0x210 #define ANADIG_DIGPROG 0x260 +#define ANADIG_DIGPROG_IMX6SL 0x280 #define BM_ANADIG_REG_2P5_ENABLE_WEAK_LINREG 0x40000 #define BM_ANADIG_REG_CORE_FET_ODRIVE 0x20000000 @@ -76,21 +78,38 @@ static void imx_anatop_usb_chrg_detect_disable(void) BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B); } -u32 imx_anatop_get_digprog(void) +void __init imx_init_revision_from_anatop(void) { struct device_node *np; void __iomem *anatop_base; - static u32 digprog; - - if (digprog) - return digprog; + unsigned int revision; + u32 digprog; + u16 offset = ANADIG_DIGPROG; np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop"); anatop_base = of_iomap(np, 0); WARN_ON(!anatop_base); - digprog = readl_relaxed(anatop_base + ANADIG_DIGPROG); + if (of_device_is_compatible(np, "fsl,imx6sl-anatop")) + offset = ANADIG_DIGPROG_IMX6SL; + digprog = readl_relaxed(anatop_base + offset); + iounmap(anatop_base); + + switch (digprog & 0xff) { + case 0: + revision = IMX_CHIP_REVISION_1_0; + break; + case 1: + revision = IMX_CHIP_REVISION_1_1; + break; + case 2: + revision = IMX_CHIP_REVISION_1_2; + break; + default: + revision = IMX_CHIP_REVISION_UNKNOWN; + } - return digprog; + mxc_set_cpu_type(digprog >> 16 & 0xff); + imx_set_soc_revision(revision); } void __init imx_anatop_init(void) diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c index 7c0dc4540aa..ce37af26ff8 100644 --- a/arch/arm/mach-imx/clk-imx51-imx53.c +++ b/arch/arm/mach-imx/clk-imx51-imx53.c @@ -11,8 +11,12 @@ #include <linux/clk.h> #include <linux/io.h> #include <linux/clkdev.h> +#include <linux/clk-provider.h> #include <linux/of.h> #include <linux/err.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> #include "crm-regs-imx5.h" #include "clk.h" @@ -131,8 +135,6 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil, { int i; - of_clk_init(NULL); - clk[dummy] = imx_clk_fixed("dummy", 0); clk[ckil] = imx_obtain_fixed_clock("ckil", rate_ckil); clk[osc] = imx_obtain_fixed_clock("osc", rate_osc); @@ -465,12 +467,17 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, return 0; } -int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, - unsigned long rate_ckih1, unsigned long rate_ckih2) +static void __init mx51_clocks_init_dt(struct device_node *np) { - int i; + mx51_clocks_init(0, 0, 0, 0); +} +CLK_OF_DECLARE(imx51_ccm, "fsl,imx51-ccm", mx51_clocks_init_dt); + +static void __init mx53_clocks_init(struct device_node *np) +{ + int i, irq; unsigned long r; - struct device_node *np; + void __iomem *base; clk[pll1_sw] = imx_clk_pllv2("pll1_sw", "osc", MX53_DPLL1_BASE); clk[pll2_sw] = imx_clk_pllv2("pll2_sw", "osc", MX53_DPLL2_BASE); @@ -529,12 +536,11 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, pr_err("i.MX53 clk %d: register failed with %ld\n", i, PTR_ERR(clk[i])); - np = of_find_compatible_node(NULL, NULL, "fsl,imx53-ccm"); clk_data.clks = clk; clk_data.clk_num = ARRAY_SIZE(clk); of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); - mx5_clocks_common_init(rate_ckil, rate_osc, rate_ckih1, rate_ckih2); + mx5_clocks_common_init(0, 0, 0, 0); clk_register_clkdev(clk[vpu_gate], NULL, "imx53-vpu.0"); clk_register_clkdev(clk[i2c3_gate], NULL, "imx21-i2c.2"); @@ -557,9 +563,6 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, clk_set_rate(clk[esdhc_a_podf], 200000000); clk_set_rate(clk[esdhc_b_podf], 200000000); - /* System timer */ - mxc_timer_init(MX53_IO_ADDRESS(MX53_GPT1_BASE_ADDR), MX53_INT_GPT); - clk_prepare_enable(clk[iim_gate]); imx_print_silicon_rev("i.MX53", mx53_revision()); clk_disable_unprepare(clk[iim_gate]); @@ -567,15 +570,10 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, r = clk_round_rate(clk[usboh3_per_gate], 54000000); clk_set_rate(clk[usboh3_per_gate], r); - return 0; -} - -int __init mx51_clocks_init_dt(void) -{ - return mx51_clocks_init(0, 0, 0, 0); -} - -int __init mx53_clocks_init_dt(void) -{ - return mx53_clocks_init(0, 0, 0, 0); + np = of_find_compatible_node(NULL, NULL, "fsl,imx53-gpt"); + base = of_iomap(np, 0); + WARN_ON(!base); + irq = irq_of_parse_and_map(np, 0); + mxc_timer_init(base, irq); } +CLK_OF_DECLARE(imx53_ccm, "fsl,imx53-ccm", mx53_clocks_init); diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index 9181a241d3a..d756d91fd74 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -14,7 +14,6 @@ #include <linux/types.h> #include <linux/clk.h> #include <linux/clkdev.h> -#include <linux/delay.h> #include <linux/err.h> #include <linux/io.h> #include <linux/of.h> @@ -25,155 +24,6 @@ #include "common.h" #include "hardware.h" -#define CCR 0x0 -#define BM_CCR_WB_COUNT (0x7 << 16) -#define BM_CCR_RBC_BYPASS_COUNT (0x3f << 21) -#define BM_CCR_RBC_EN (0x1 << 27) - -#define CCGR0 0x68 -#define CCGR1 0x6c -#define CCGR2 0x70 -#define CCGR3 0x74 -#define CCGR4 0x78 -#define CCGR5 0x7c -#define CCGR6 0x80 -#define CCGR7 0x84 - -#define CLPCR 0x54 -#define BP_CLPCR_LPM 0 -#define BM_CLPCR_LPM (0x3 << 0) -#define BM_CLPCR_BYPASS_PMIC_READY (0x1 << 2) -#define BM_CLPCR_ARM_CLK_DIS_ON_LPM (0x1 << 5) -#define BM_CLPCR_SBYOS (0x1 << 6) -#define BM_CLPCR_DIS_REF_OSC (0x1 << 7) -#define BM_CLPCR_VSTBY (0x1 << 8) -#define BP_CLPCR_STBY_COUNT 9 -#define BM_CLPCR_STBY_COUNT (0x3 << 9) -#define BM_CLPCR_COSC_PWRDOWN (0x1 << 11) -#define BM_CLPCR_WB_PER_AT_LPM (0x1 << 16) -#define BM_CLPCR_WB_CORE_AT_LPM (0x1 << 17) -#define BM_CLPCR_BYP_MMDC_CH0_LPM_HS (0x1 << 19) -#define BM_CLPCR_BYP_MMDC_CH1_LPM_HS (0x1 << 21) -#define BM_CLPCR_MASK_CORE0_WFI (0x1 << 22) -#define BM_CLPCR_MASK_CORE1_WFI (0x1 << 23) -#define BM_CLPCR_MASK_CORE2_WFI (0x1 << 24) -#define BM_CLPCR_MASK_CORE3_WFI (0x1 << 25) -#define BM_CLPCR_MASK_SCU_IDLE (0x1 << 26) -#define BM_CLPCR_MASK_L2CC_IDLE (0x1 << 27) - -#define CGPR 0x64 -#define BM_CGPR_CHICKEN_BIT (0x1 << 17) - -static void __iomem *ccm_base; - -void imx6q_set_chicken_bit(void) -{ - u32 val = readl_relaxed(ccm_base + CGPR); - - val |= BM_CGPR_CHICKEN_BIT; - writel_relaxed(val, ccm_base + CGPR); -} - -static void imx6q_enable_rbc(bool enable) -{ - u32 val; - static bool last_rbc_mode; - - if (last_rbc_mode == enable) - return; - /* - * need to mask all interrupts in GPC before - * operating RBC configurations - */ - imx_gpc_mask_all(); - - /* configure RBC enable bit */ - val = readl_relaxed(ccm_base + CCR); - val &= ~BM_CCR_RBC_EN; - val |= enable ? BM_CCR_RBC_EN : 0; - writel_relaxed(val, ccm_base + CCR); - - /* configure RBC count */ - val = readl_relaxed(ccm_base + CCR); - val &= ~BM_CCR_RBC_BYPASS_COUNT; - val |= enable ? BM_CCR_RBC_BYPASS_COUNT : 0; - writel(val, ccm_base + CCR); - - /* - * need to delay at least 2 cycles of CKIL(32K) - * due to hardware design requirement, which is - * ~61us, here we use 65us for safe - */ - udelay(65); - - /* restore GPC interrupt mask settings */ - imx_gpc_restore_all(); - - last_rbc_mode = enable; -} - -static void imx6q_enable_wb(bool enable) -{ - u32 val; - static bool last_wb_mode; - - if (last_wb_mode == enable) - return; - - /* configure well bias enable bit */ - val = readl_relaxed(ccm_base + CLPCR); - val &= ~BM_CLPCR_WB_PER_AT_LPM; - val |= enable ? BM_CLPCR_WB_PER_AT_LPM : 0; - writel_relaxed(val, ccm_base + CLPCR); - - /* configure well bias count */ - val = readl_relaxed(ccm_base + CCR); - val &= ~BM_CCR_WB_COUNT; - val |= enable ? BM_CCR_WB_COUNT : 0; - writel_relaxed(val, ccm_base + CCR); - - last_wb_mode = enable; -} - -int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode) -{ - u32 val = readl_relaxed(ccm_base + CLPCR); - - val &= ~BM_CLPCR_LPM; - switch (mode) { - case WAIT_CLOCKED: - imx6q_enable_wb(false); - imx6q_enable_rbc(false); - break; - case WAIT_UNCLOCKED: - val |= 0x1 << BP_CLPCR_LPM; - val |= BM_CLPCR_ARM_CLK_DIS_ON_LPM; - break; - case STOP_POWER_ON: - val |= 0x2 << BP_CLPCR_LPM; - break; - case WAIT_UNCLOCKED_POWER_OFF: - val |= 0x1 << BP_CLPCR_LPM; - val &= ~BM_CLPCR_VSTBY; - val &= ~BM_CLPCR_SBYOS; - break; - case STOP_POWER_OFF: - val |= 0x2 << BP_CLPCR_LPM; - val |= 0x3 << BP_CLPCR_STBY_COUNT; - val |= BM_CLPCR_VSTBY; - val |= BM_CLPCR_SBYOS; - imx6q_enable_wb(true); - imx6q_enable_rbc(true); - break; - default: - return -EINVAL; - } - - writel_relaxed(val, ccm_base + CLPCR); - - return 0; -} - static const char *step_sels[] = { "osc", "pll2_pfd2_396m", }; static const char *pll1_sw_sels[] = { "pll1_sys", "step", }; static const char *periph_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll2_198m", }; @@ -182,7 +32,7 @@ static const char *periph2_clk2_sels[] = { "pll3_usb_otg", "pll2_bus", }; static const char *periph_sels[] = { "periph_pre", "periph_clk2", }; static const char *periph2_sels[] = { "periph2_pre", "periph2_clk2", }; static const char *axi_sels[] = { "periph", "pll2_pfd2_396m", "periph", "pll3_pfd1_540m", }; -static const char *audio_sels[] = { "pll4_post_div", "pll3_pfd2_508m", "pll3_pfd3_454m", "pll3_usb_otg", }; +static const char *audio_sels[] = { "pll4_audio_div", "pll3_pfd2_508m", "pll3_pfd3_454m", "pll3_usb_otg", }; static const char *gpu_axi_sels[] = { "axi", "ahb", }; static const char *gpu2d_core_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", }; static const char *gpu3d_core_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd2_396m", }; @@ -196,7 +46,7 @@ static const char *ipu2_di0_sels[] = { "ipu2_di0_pre", "dummy", "dummy", "ldb_di static const char *ipu2_di1_sels[] = { "ipu2_di1_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", }; static const char *hsi_tx_sels[] = { "pll3_120m", "pll2_pfd2_396m", }; static const char *pcie_axi_sels[] = { "axi", "ahb", }; -static const char *ssi_sels[] = { "pll3_pfd2_508m", "pll3_pfd3_454m", "pll4_post_div", }; +static const char *ssi_sels[] = { "pll3_pfd2_508m", "pll3_pfd3_454m", "pll4_audio_div", }; static const char *usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", }; static const char *enfc_sels[] = { "pll2_pfd0_352m", "pll2_bus", "pll3_usb_otg", "pll2_pfd2_396m", }; static const char *emi_sels[] = { "pll2_pfd2_396m", "pll3_usb_otg", "axi", "pll2_pfd0_352m", }; @@ -205,7 +55,7 @@ static const char *vdo_axi_sels[] = { "axi", "ahb", }; static const char *vpu_axi_sels[] = { "axi", "pll2_pfd2_396m", "pll2_pfd0_352m", }; static const char *cko1_sels[] = { "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5_video_div", "dummy", "axi", "enfc", "ipu1_di0", "ipu1_di1", "ipu2_di0", - "ipu2_di1", "ahb", "ipg", "ipg_per", "ckil", "pll4_post_div", }; + "ipu2_di1", "ahb", "ipg", "ipg_per", "ckil", "pll4_audio_div", }; static const char *cko2_sels[] = { "mmdc_ch0_axi", "mmdc_ch1_axi", "usdhc4", "usdhc1", "gpu2d_axi", "dummy", "ecspi_root", "gpu3d_axi", @@ -217,6 +67,11 @@ static const char *cko2_sels[] = { "uart_serial", "spdif", "asrc", "hsi_tx", }; static const char *cko_sels[] = { "cko1", "cko2", }; +static const char *lvds_sels[] = { + "dummy", "dummy", "dummy", "dummy", "dummy", "dummy", + "pll4_audio", "pll5_video", "pll8_mlb", "enet_ref", + "pcie_ref", "sata_ref", +}; enum mx6q_clks { dummy, ckil, ckih, osc, pll2_pfd0_352m, pll2_pfd1_594m, pll2_pfd2_396m, @@ -251,7 +106,8 @@ enum mx6q_clks { ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5, sata_ref, sata_ref_100m, pcie_ref, pcie_ref_125m, enet_ref, usbphy1_gate, usbphy2_gate, pll4_post_div, pll5_post_div, pll5_video_div, eim_slow, - spdif, cko2_sel, cko2_podf, cko2, cko, vdoa, clk_max + spdif, cko2_sel, cko2_podf, cko2, cko, vdoa, pll4_audio_div, + lvds1_sel, lvds2_sel, lvds1_gate, lvds2_gate, clk_max }; static struct clk *clk[clk_max]; @@ -300,7 +156,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) WARN_ON(!base); /* Audio/video PLL post dividers do not work on i.MX6q revision 1.0 */ - if (cpu_is_imx6q() && imx6q_revision() == IMX_CHIP_REVISION_1_0) { + if (cpu_is_imx6q() && imx_get_soc_revision() == IMX_CHIP_REVISION_1_0) { post_div_table[1].div = 1; post_div_table[2].div = 1; video_div_table[1].div = 1; @@ -342,6 +198,18 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) base + 0xe0, 0, 2, 0, clk_enet_ref_table, &imx_ccm_lock); + clk[lvds1_sel] = imx_clk_mux("lvds1_sel", base + 0x160, 0, 5, lvds_sels, ARRAY_SIZE(lvds_sels)); + clk[lvds2_sel] = imx_clk_mux("lvds2_sel", base + 0x160, 5, 5, lvds_sels, ARRAY_SIZE(lvds_sels)); + + /* + * lvds1_gate and lvds2_gate are pseudo-gates. Both can be + * independently configured as clock inputs or outputs. We treat + * the "output_enable" bit as a gate, even though it's really just + * enabling clock output. + */ + clk[lvds1_gate] = imx_clk_gate("lvds1_gate", "dummy", base + 0x160, 10); + clk[lvds2_gate] = imx_clk_gate("lvds2_gate", "dummy", base + 0x160, 11); + /* name parent_name reg idx */ clk[pll2_pfd0_352m] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus", base + 0x100, 0); clk[pll2_pfd1_594m] = imx_clk_pfd("pll2_pfd1_594m", "pll2_bus", base + 0x100, 1); @@ -359,13 +227,15 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) clk[twd] = imx_clk_fixed_factor("twd", "arm", 1, 2); clk[pll4_post_div] = clk_register_divider_table(NULL, "pll4_post_div", "pll4_audio", CLK_SET_RATE_PARENT, base + 0x70, 19, 2, 0, post_div_table, &imx_ccm_lock); + clk[pll4_audio_div] = clk_register_divider(NULL, "pll4_audio_div", "pll4_post_div", CLK_SET_RATE_PARENT, base + 0x170, 15, 1, 0, &imx_ccm_lock); clk[pll5_post_div] = clk_register_divider_table(NULL, "pll5_post_div", "pll5_video", CLK_SET_RATE_PARENT, base + 0xa0, 19, 2, 0, post_div_table, &imx_ccm_lock); clk[pll5_video_div] = clk_register_divider_table(NULL, "pll5_video_div", "pll5_post_div", CLK_SET_RATE_PARENT, base + 0x170, 30, 2, 0, video_div_table, &imx_ccm_lock); np = ccm_node; base = of_iomap(np, 0); WARN_ON(!base); - ccm_base = base; + + imx6q_pm_set_ccm_base(base); /* name reg shift width parent_names num_parents */ clk[step] = imx_clk_mux("step", base + 0xc, 8, 1, step_sels, ARRAY_SIZE(step_sels)); @@ -573,7 +443,8 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) clk_register_clkdev(clk[pll4_post_div], "pll4_post_div", NULL); clk_register_clkdev(clk[pll4_audio], "pll4_audio", NULL); - if ((imx6q_revision() != IMX_CHIP_REVISION_1_0) || cpu_is_imx6dl()) { + if ((imx_get_soc_revision() != IMX_CHIP_REVISION_1_0) || + cpu_is_imx6dl()) { clk_set_parent(clk[ldb_di0_sel], clk[pll5_video_div]); clk_set_parent(clk[ldb_di1_sel], clk[pll5_video_div]); } @@ -603,8 +474,9 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) if (ret) pr_warn("failed to set up CLKO: %d\n", ret); - /* Set initial power mode */ - imx6q_set_lpm(WAIT_CLOCKED); + /* All existing boards with PCIe use LVDS1 */ + if (IS_ENABLED(CONFIG_PCI_IMX6)) + clk_set_parent(clk[lvds1_sel], clk[sata_ref]); np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt"); base = of_iomap(np, 0); diff --git a/arch/arm/mach-imx/clk-imx6sl.c b/arch/arm/mach-imx/clk-imx6sl.c index a5c3c5d21ae..c0c4ef55e35 100644 --- a/arch/arm/mach-imx/clk-imx6sl.c +++ b/arch/arm/mach-imx/clk-imx6sl.c @@ -127,6 +127,9 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node) base = of_iomap(np, 0); WARN_ON(!base); + /* Reuse imx6q pm code */ + imx6q_pm_set_ccm_base(base); + /* name reg shift width parent_names num_parents */ clks[IMX6SL_CLK_STEP] = imx_clk_mux("step", base + 0xc, 8, 1, step_sels, ARRAY_SIZE(step_sels)); clks[IMX6SL_CLK_PLL1_SW] = imx_clk_mux("pll1_sw", base + 0xc, 2, 1, pll1_sw_sels, ARRAY_SIZE(pll1_sw_sels)); diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index 4517fd760bf..7cbe22d0c6e 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -13,74 +13,73 @@ #include <linux/reboot.h> +struct irq_data; struct platform_device; struct pt_regs; struct clk; enum mxc_cpu_pwr_mode; -extern void mx1_map_io(void); -extern void mx21_map_io(void); -extern void mx25_map_io(void); -extern void mx27_map_io(void); -extern void mx31_map_io(void); -extern void mx35_map_io(void); -extern void mx51_map_io(void); -extern void mx53_map_io(void); -extern void imx1_init_early(void); -extern void imx21_init_early(void); -extern void imx25_init_early(void); -extern void imx27_init_early(void); -extern void imx31_init_early(void); -extern void imx35_init_early(void); -extern void imx51_init_early(void); -extern void imx53_init_early(void); -extern void mxc_init_irq(void __iomem *); -extern void tzic_init_irq(void __iomem *); -extern void mx1_init_irq(void); -extern void mx21_init_irq(void); -extern void mx25_init_irq(void); -extern void mx27_init_irq(void); -extern void mx31_init_irq(void); -extern void mx35_init_irq(void); -extern void mx51_init_irq(void); -extern void mx53_init_irq(void); -extern void imx1_soc_init(void); -extern void imx21_soc_init(void); -extern void imx25_soc_init(void); -extern void imx27_soc_init(void); -extern void imx31_soc_init(void); -extern void imx35_soc_init(void); -extern void imx51_soc_init(void); -extern void imx51_init_late(void); -extern void imx53_init_late(void); -extern void epit_timer_init(void __iomem *base, int irq); -extern void mxc_timer_init(void __iomem *, int); -extern int mx1_clocks_init(unsigned long fref); -extern int mx21_clocks_init(unsigned long lref, unsigned long fref); -extern int mx25_clocks_init(void); -extern int mx27_clocks_init(unsigned long fref); -extern int mx31_clocks_init(unsigned long fref); -extern int mx35_clocks_init(void); -extern int mx51_clocks_init(unsigned long ckil, unsigned long osc, +void mx1_map_io(void); +void mx21_map_io(void); +void mx25_map_io(void); +void mx27_map_io(void); +void mx31_map_io(void); +void mx35_map_io(void); +void mx51_map_io(void); +void mx53_map_io(void); +void imx1_init_early(void); +void imx21_init_early(void); +void imx25_init_early(void); +void imx27_init_early(void); +void imx31_init_early(void); +void imx35_init_early(void); +void imx51_init_early(void); +void imx53_init_early(void); +void mxc_init_irq(void __iomem *); +void tzic_init_irq(void __iomem *); +void mx1_init_irq(void); +void mx21_init_irq(void); +void mx25_init_irq(void); +void mx27_init_irq(void); +void mx31_init_irq(void); +void mx35_init_irq(void); +void mx51_init_irq(void); +void mx53_init_irq(void); +void imx1_soc_init(void); +void imx21_soc_init(void); +void imx25_soc_init(void); +void imx27_soc_init(void); +void imx31_soc_init(void); +void imx35_soc_init(void); +void imx51_soc_init(void); +void imx51_init_late(void); +void imx53_init_late(void); +void epit_timer_init(void __iomem *base, int irq); +void mxc_timer_init(void __iomem *, int); +int mx1_clocks_init(unsigned long fref); +int mx21_clocks_init(unsigned long lref, unsigned long fref); +int mx25_clocks_init(void); +int mx27_clocks_init(unsigned long fref); +int mx31_clocks_init(unsigned long fref); +int mx35_clocks_init(void); +int mx51_clocks_init(unsigned long ckil, unsigned long osc, unsigned long ckih1, unsigned long ckih2); -extern int mx53_clocks_init(unsigned long ckil, unsigned long osc, - unsigned long ckih1, unsigned long ckih2); -extern int mx25_clocks_init_dt(void); -extern int mx27_clocks_init_dt(void); -extern int mx31_clocks_init_dt(void); -extern int mx51_clocks_init_dt(void); -extern int mx53_clocks_init_dt(void); -extern struct platform_device *mxc_register_gpio(char *name, int id, +int mx25_clocks_init_dt(void); +int mx27_clocks_init_dt(void); +int mx31_clocks_init_dt(void); +struct platform_device *mxc_register_gpio(char *name, int id, resource_size_t iobase, resource_size_t iosize, int irq, int irq_high); -extern void mxc_set_cpu_type(unsigned int type); -extern void mxc_restart(enum reboot_mode, const char *); -extern void mxc_arch_reset_init(void __iomem *); -extern void mxc_arch_reset_init_dt(void); -extern int mx53_revision(void); -extern int imx6q_revision(void); -extern int mx53_display_revision(void); -extern void imx_set_aips(void __iomem *); -extern int mxc_device_init(void); +void mxc_set_cpu_type(unsigned int type); +void mxc_restart(enum reboot_mode, const char *); +void mxc_arch_reset_init(void __iomem *); +void mxc_arch_reset_init_dt(void); +int mx53_revision(void); +void imx_set_aips(void __iomem *); +int mxc_device_init(void); +void imx_set_soc_revision(unsigned int rev); +unsigned int imx_get_soc_revision(void); +void imx_init_revision_from_anatop(void); +struct device *imx_soc_device_init(void); enum mxc_cpu_pwr_mode { WAIT_CLOCKED, /* wfi only */ @@ -97,8 +96,8 @@ enum mx3_cpu_pwr_mode { MX3_SLEEP, }; -extern void mx3_cpu_lp_set(enum mx3_cpu_pwr_mode mode); -extern void imx_print_silicon_rev(const char *cpu, int srev); +void mx3_cpu_lp_set(enum mx3_cpu_pwr_mode mode); +void imx_print_silicon_rev(const char *cpu, int srev); void avic_handle_irq(struct pt_regs *); void tzic_handle_irq(struct pt_regs *); @@ -112,54 +111,61 @@ void tzic_handle_irq(struct pt_regs *); #define imx51_handle_irq tzic_handle_irq #define imx53_handle_irq tzic_handle_irq -extern void imx_enable_cpu(int cpu, bool enable); -extern void imx_set_cpu_jump(int cpu, void *jump_addr); -extern u32 imx_get_cpu_arg(int cpu); -extern void imx_set_cpu_arg(int cpu, u32 arg); -extern void v7_cpu_resume(void); +void imx_enable_cpu(int cpu, bool enable); +void imx_set_cpu_jump(int cpu, void *jump_addr); +u32 imx_get_cpu_arg(int cpu); +void imx_set_cpu_arg(int cpu, u32 arg); +void v7_cpu_resume(void); #ifdef CONFIG_SMP -extern void v7_secondary_startup(void); -extern void imx_scu_map_io(void); -extern void imx_smp_prepare(void); -extern void imx_scu_standby_enable(void); +void v7_secondary_startup(void); +void imx_scu_map_io(void); +void imx_smp_prepare(void); +void imx_scu_standby_enable(void); #else static inline void imx_scu_map_io(void) {} static inline void imx_smp_prepare(void) {} static inline void imx_scu_standby_enable(void) {} #endif -extern void imx_src_init(void); -extern void imx_src_prepare_restart(void); -extern void imx_gpc_init(void); -extern void imx_gpc_pre_suspend(void); -extern void imx_gpc_post_resume(void); -extern void imx_gpc_mask_all(void); -extern void imx_gpc_restore_all(void); -extern void imx_anatop_init(void); -extern void imx_anatop_pre_suspend(void); -extern void imx_anatop_post_resume(void); -extern u32 imx_anatop_get_digprog(void); -extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode); -extern void imx6q_set_chicken_bit(void); - -extern void imx_cpu_die(unsigned int cpu); -extern int imx_cpu_kill(unsigned int cpu); +void imx_src_init(void); +#ifdef CONFIG_HAVE_IMX_SRC +void imx_src_prepare_restart(void); +#else +static inline void imx_src_prepare_restart(void) {} +#endif +void imx_gpc_init(void); +void imx_gpc_pre_suspend(void); +void imx_gpc_post_resume(void); +void imx_gpc_mask_all(void); +void imx_gpc_restore_all(void); +void imx_gpc_irq_mask(struct irq_data *d); +void imx_gpc_irq_unmask(struct irq_data *d); +void imx_anatop_init(void); +void imx_anatop_pre_suspend(void); +void imx_anatop_post_resume(void); +int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode); +void imx6q_set_chicken_bit(void); + +void imx_cpu_die(unsigned int cpu); +int imx_cpu_kill(unsigned int cpu); #ifdef CONFIG_PM -extern void imx6q_pm_init(void); -extern void imx5_pm_init(void); +void imx6q_pm_init(void); +void imx6q_pm_set_ccm_base(void __iomem *base); +void imx5_pm_init(void); #else static inline void imx6q_pm_init(void) {} +static inline void imx6q_pm_set_ccm_base(void __iomem *base) {} static inline void imx5_pm_init(void) {} #endif #ifdef CONFIG_NEON -extern int mx51_neon_fixup(void); +int mx51_neon_fixup(void); #else static inline int mx51_neon_fixup(void) { return 0; } #endif #ifdef CONFIG_CACHE_L2X0 -extern void imx_init_l2cache(void); +void imx_init_l2cache(void); #else static inline void imx_init_l2cache(void) {} #endif diff --git a/arch/arm/mach-imx/cpu.c b/arch/arm/mach-imx/cpu.c index e70e3acbf9b..ba3b498a67e 100644 --- a/arch/arm/mach-imx/cpu.c +++ b/arch/arm/mach-imx/cpu.c @@ -1,6 +1,9 @@ - +#include <linux/err.h> #include <linux/module.h> #include <linux/io.h> +#include <linux/of.h> +#include <linux/slab.h> +#include <linux/sys_soc.h> #include "hardware.h" #include "common.h" @@ -8,11 +11,23 @@ unsigned int __mxc_cpu_type; EXPORT_SYMBOL(__mxc_cpu_type); +static unsigned int imx_soc_revision; + void mxc_set_cpu_type(unsigned int type) { __mxc_cpu_type = type; } +void imx_set_soc_revision(unsigned int rev) +{ + imx_soc_revision = rev; +} + +unsigned int imx_get_soc_revision(void) +{ + return imx_soc_revision; +} + void imx_print_silicon_rev(const char *cpu, int srev) { if (srev == IMX_CHIP_REVISION_UNKNOWN) @@ -44,3 +59,81 @@ void __init imx_set_aips(void __iomem *base) reg = __raw_readl(base + 0x50) & 0x00FFFFFF; __raw_writel(reg, base + 0x50); } + +struct device * __init imx_soc_device_init(void) +{ + struct soc_device_attribute *soc_dev_attr; + struct soc_device *soc_dev; + struct device_node *root; + const char *soc_id; + int ret; + + soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); + if (!soc_dev_attr) + return NULL; + + soc_dev_attr->family = "Freescale i.MX"; + + root = of_find_node_by_path("/"); + ret = of_property_read_string(root, "model", &soc_dev_attr->machine); + of_node_put(root); + if (ret) + goto free_soc; + + switch (__mxc_cpu_type) { + case MXC_CPU_MX1: + soc_id = "i.MX1"; + break; + case MXC_CPU_MX21: + soc_id = "i.MX21"; + break; + case MXC_CPU_MX25: + soc_id = "i.MX25"; + break; + case MXC_CPU_MX27: + soc_id = "i.MX27"; + break; + case MXC_CPU_MX31: + soc_id = "i.MX31"; + break; + case MXC_CPU_MX35: + soc_id = "i.MX35"; + break; + case MXC_CPU_MX51: + soc_id = "i.MX51"; + break; + case MXC_CPU_MX53: + soc_id = "i.MX53"; + break; + case MXC_CPU_IMX6SL: + soc_id = "i.MX6SL"; + break; + case MXC_CPU_IMX6DL: + soc_id = "i.MX6DL"; + break; + case MXC_CPU_IMX6Q: + soc_id = "i.MX6Q"; + break; + default: + soc_id = "Unknown"; + } + soc_dev_attr->soc_id = soc_id; + + soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%d.%d", + (imx_soc_revision >> 4) & 0xf, + imx_soc_revision & 0xf); + if (!soc_dev_attr->revision) + goto free_soc; + + soc_dev = soc_device_register(soc_dev_attr); + if (IS_ERR(soc_dev)) + goto free_rev; + + return soc_device_to_device(soc_dev); + +free_rev: + kfree(soc_dev_attr->revision); +free_soc: + kfree(soc_dev_attr); + return NULL; +} diff --git a/arch/arm/mach-imx/epit.c b/arch/arm/mach-imx/epit.c index e02de188ae8..074b1a81ba7 100644 --- a/arch/arm/mach-imx/epit.c +++ b/arch/arm/mach-imx/epit.c @@ -171,7 +171,7 @@ static irqreturn_t epit_timer_interrupt(int irq, void *dev_id) static struct irqaction epit_timer_irq = { .name = "i.MX EPIT Timer Tick", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .flags = IRQF_TIMER | IRQF_IRQPOLL, .handler = epit_timer_interrupt, }; diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c index 44a65e9ff1f..586e0171a65 100644 --- a/arch/arm/mach-imx/gpc.c +++ b/arch/arm/mach-imx/gpc.c @@ -90,7 +90,7 @@ void imx_gpc_restore_all(void) writel_relaxed(gpc_saved_imrs[i], reg_imr1 + i * 4); } -static void imx_gpc_irq_unmask(struct irq_data *d) +void imx_gpc_irq_unmask(struct irq_data *d) { void __iomem *reg; u32 val; @@ -105,7 +105,7 @@ static void imx_gpc_irq_unmask(struct irq_data *d) writel_relaxed(val, reg); } -static void imx_gpc_irq_mask(struct irq_data *d) +void imx_gpc_irq_mask(struct irq_data *d) { void __iomem *reg; u32 val; diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c index 3daf1ed9057..b35e99cc5e5 100644 --- a/arch/arm/mach-imx/hotplug.c +++ b/arch/arm/mach-imx/hotplug.c @@ -52,7 +52,9 @@ void imx_cpu_die(unsigned int cpu) * the register being cleared to kill the cpu. */ imx_set_cpu_arg(cpu, ~0); - cpu_do_idle(); + + while (1) + cpu_do_idle(); } int imx_cpu_kill(unsigned int cpu) diff --git a/arch/arm/mach-imx/imx51-dt.c b/arch/arm/mach-imx/imx51-dt.c index 53e43e579dd..bece8a65e6f 100644 --- a/arch/arm/mach-imx/imx51-dt.c +++ b/arch/arm/mach-imx/imx51-dt.c @@ -34,17 +34,11 @@ static const char *imx51_dt_board_compat[] __initdata = { NULL }; -static void __init imx51_timer_init(void) -{ - mx51_clocks_init_dt(); -} - DT_MACHINE_START(IMX51_DT, "Freescale i.MX51 (Device Tree Support)") .map_io = mx51_map_io, .init_early = imx51_init_early, .init_irq = mx51_init_irq, .handle_irq = imx51_handle_irq, - .init_time = imx51_timer_init, .init_machine = imx51_dt_init, .init_late = imx51_init_late, .dt_compat = imx51_dt_board_compat, diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c index 368a6e3f592..58b864a3fc2 100644 --- a/arch/arm/mach-imx/mach-armadillo5x0.c +++ b/arch/arm/mach-imx/mach-armadillo5x0.c @@ -404,8 +404,7 @@ static int armadillo5x0_sdhc1_init(struct device *dev, /* When supported the trigger type have to be BOTH */ ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK)), - detect_irq, - IRQF_DISABLED | IRQF_TRIGGER_FALLING, + detect_irq, IRQF_TRIGGER_FALLING, "sdhc-detect", data); if (ret) diff --git a/arch/arm/mach-imx/mach-imx53.c b/arch/arm/mach-imx/mach-imx53.c index 98c58944015..c9c4d8d9693 100644 --- a/arch/arm/mach-imx/mach-imx53.c +++ b/arch/arm/mach-imx/mach-imx53.c @@ -36,17 +36,11 @@ static const char *imx53_dt_board_compat[] __initdata = { NULL }; -static void __init imx53_timer_init(void) -{ - mx53_clocks_init_dt(); -} - DT_MACHINE_START(IMX53_DT, "Freescale i.MX53 (Device Tree Support)") .map_io = mx53_map_io, .init_early = imx53_init_early, .init_irq = mx53_init_irq, .handle_irq = imx53_handle_irq, - .init_time = imx53_timer_init, .init_machine = imx53_dt_init, .init_late = imx53_init_late, .dt_compat = imx53_dt_board_compat, diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 90372a21087..0f9f24116da 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -11,11 +11,8 @@ */ #include <linux/clk.h> -#include <linux/clk-provider.h> #include <linux/clkdev.h> -#include <linux/clocksource.h> #include <linux/cpu.h> -#include <linux/delay.h> #include <linux/export.h> #include <linux/init.h> #include <linux/io.h> @@ -40,64 +37,6 @@ #include "cpuidle.h" #include "hardware.h" -static u32 chip_revision; - -int imx6q_revision(void) -{ - return chip_revision; -} - -static void __init imx6q_init_revision(void) -{ - u32 rev = imx_anatop_get_digprog(); - - switch (rev & 0xff) { - case 0: - chip_revision = IMX_CHIP_REVISION_1_0; - break; - case 1: - chip_revision = IMX_CHIP_REVISION_1_1; - break; - case 2: - chip_revision = IMX_CHIP_REVISION_1_2; - break; - default: - chip_revision = IMX_CHIP_REVISION_UNKNOWN; - } - - mxc_set_cpu_type(rev >> 16 & 0xff); -} - -static void imx6q_restart(enum reboot_mode mode, const char *cmd) -{ - struct device_node *np; - void __iomem *wdog_base; - - np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-wdt"); - wdog_base = of_iomap(np, 0); - if (!wdog_base) - goto soft; - - imx_src_prepare_restart(); - - /* enable wdog */ - writew_relaxed(1 << 2, wdog_base); - /* write twice to ensure the request will not get ignored */ - writew_relaxed(1 << 2, wdog_base); - - /* wait for reset to assert ... */ - mdelay(500); - - pr_err("Watchdog reset failed to assert reset\n"); - - /* delay to allow the serial port to show the message */ - mdelay(50); - -soft: - /* we'll take a jump through zero as a poor second */ - soft_restart(0); -} - /* For imx6q sabrelite board: set KSZ9021RN RGMII pad skew */ static int ksz9021rn_phy_fixup(struct phy_device *phydev) { @@ -192,9 +131,20 @@ static void __init imx6q_1588_init(void) static void __init imx6q_init_machine(void) { + struct device *parent; + + imx_print_silicon_rev(cpu_is_imx6dl() ? "i.MX6DL" : "i.MX6Q", + imx_get_soc_revision()); + + mxc_arch_reset_init_dt(); + + parent = imx_soc_device_init(); + if (parent == NULL) + pr_warn("failed to initialize soc device\n"); + imx6q_enet_phy_init(); - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); + of_platform_populate(NULL, of_default_bus_match_table, NULL, parent); imx_anatop_init(); imx6q_pm_init(); @@ -269,7 +219,7 @@ static void __init imx6q_init_late(void) * WAIT mode is broken on TO 1.0 and 1.1, so there is no point * to run cpuidle on them. */ - if (imx6q_revision() > IMX_CHIP_REVISION_1_1) + if (imx_get_soc_revision() > IMX_CHIP_REVISION_1_1) imx6q_cpuidle_init(); if (IS_ENABLED(CONFIG_ARM_IMX6Q_CPUFREQ)) { @@ -286,21 +236,13 @@ static void __init imx6q_map_io(void) static void __init imx6q_init_irq(void) { - imx6q_init_revision(); + imx_init_revision_from_anatop(); imx_init_l2cache(); imx_src_init(); imx_gpc_init(); irqchip_init(); } -static void __init imx6q_timer_init(void) -{ - of_clk_init(NULL); - clocksource_of_init(); - imx_print_silicon_rev(cpu_is_imx6dl() ? "i.MX6DL" : "i.MX6Q", - imx6q_revision()); -} - static const char *imx6q_dt_compat[] __initdata = { "fsl,imx6dl", "fsl,imx6q", @@ -311,9 +253,8 @@ DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad/DualLite (Device Tree)") .smp = smp_ops(imx_smp_ops), .map_io = imx6q_map_io, .init_irq = imx6q_init_irq, - .init_time = imx6q_timer_init, .init_machine = imx6q_init_machine, .init_late = imx6q_init_late, .dt_compat = imx6q_dt_compat, - .restart = imx6q_restart, + .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-imx6sl.c b/arch/arm/mach-imx/mach-imx6sl.c index 0d75dc54f71..2f952e3fcf8 100644 --- a/arch/arm/mach-imx/mach-imx6sl.c +++ b/arch/arm/mach-imx/mach-imx6sl.c @@ -7,35 +7,60 @@ * */ -#include <linux/clk-provider.h> #include <linux/irqchip.h> #include <linux/of.h> #include <linux/of_platform.h> +#include <linux/mfd/syscon.h> +#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h> +#include <linux/regmap.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include "common.h" +static void __init imx6sl_fec_init(void) +{ + struct regmap *gpr; + + /* set FEC clock from internal PLL clock source */ + gpr = syscon_regmap_lookup_by_compatible("fsl,imx6sl-iomuxc-gpr"); + if (!IS_ERR(gpr)) { + regmap_update_bits(gpr, IOMUXC_GPR1, + IMX6SL_GPR1_FEC_CLOCK_MUX2_SEL_MASK, 0); + regmap_update_bits(gpr, IOMUXC_GPR1, + IMX6SL_GPR1_FEC_CLOCK_MUX1_SEL_MASK, 0); + } else { + pr_err("failed to find fsl,imx6sl-iomux-gpr regmap\n"); + } +} + static void __init imx6sl_init_machine(void) { + struct device *parent; + mxc_arch_reset_init_dt(); - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); + parent = imx_soc_device_init(); + if (parent == NULL) + pr_warn("failed to initialize soc device\n"); + + of_platform_populate(NULL, of_default_bus_match_table, NULL, parent); + + imx6sl_fec_init(); + imx_anatop_init(); + /* Reuse imx6q pm code */ + imx6q_pm_init(); } static void __init imx6sl_init_irq(void) { + imx_init_revision_from_anatop(); imx_init_l2cache(); imx_src_init(); imx_gpc_init(); irqchip_init(); } -static void __init imx6sl_timer_init(void) -{ - of_clk_init(NULL); -} - static const char *imx6sl_dt_compat[] __initdata = { "fsl,imx6sl", NULL, @@ -44,7 +69,6 @@ static const char *imx6sl_dt_compat[] __initdata = { DT_MACHINE_START(IMX6SL, "Freescale i.MX6 SoloLite (Device Tree)") .map_io = debug_ll_io_init, .init_irq = imx6sl_init_irq, - .init_time = imx6sl_timer_init, .init_machine = imx6sl_init_machine, .dt_compat = imx6sl_dt_compat, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c index 1ed916175d4..50044a21b38 100644 --- a/arch/arm/mach-imx/mach-mx31_3ds.c +++ b/arch/arm/mach-imx/mach-mx31_3ds.c @@ -311,7 +311,7 @@ static int mx31_3ds_sdhc1_init(struct device *dev, } ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)), - detect_irq, IRQF_DISABLED | + detect_irq, IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, "sdhc1-detect", data); if (ret) { diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c index bc0261e99d3..45303bd6290 100644 --- a/arch/arm/mach-imx/mach-pcm037.c +++ b/arch/arm/mach-imx/mach-pcm037.c @@ -371,8 +371,7 @@ static int pcm970_sdhc1_init(struct device *dev, irq_handler_t detect_irq, #endif ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_SCK6)), detect_irq, - IRQF_DISABLED | IRQF_TRIGGER_FALLING, - "sdhc-detect", data); + IRQF_TRIGGER_FALLING, "sdhc-detect", data); if (ret) goto err_gpio_free_2; diff --git a/arch/arm/mach-imx/mach-vf610.c b/arch/arm/mach-imx/mach-vf610.c index 816991deb9b..af0cb8a9dc4 100644 --- a/arch/arm/mach-imx/mach-vf610.c +++ b/arch/arm/mach-imx/mach-vf610.c @@ -8,9 +8,7 @@ */ #include <linux/of_platform.h> -#include <linux/clocksource.h> #include <linux/irqchip.h> -#include <linux/clk-provider.h> #include <asm/mach/arch.h> #include <asm/hardware/cache-l2x0.h> @@ -28,12 +26,6 @@ static void __init vf610_init_irq(void) irqchip_init(); } -static void __init vf610_init_time(void) -{ - of_clk_init(NULL); - clocksource_of_init(); -} - static const char *vf610_dt_compat[] __initdata = { "fsl,vf610", NULL, @@ -41,7 +33,6 @@ static const char *vf610_dt_compat[] __initdata = { DT_MACHINE_START(VYBRID_VF610, "Freescale Vybrid VF610 (Device Tree)") .init_irq = vf610_init_irq, - .init_time = vf610_init_time, .init_machine = vf610_init_machine, .dt_compat = vf610_dt_compat, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c index eb3cce38c70..d1d52600f45 100644 --- a/arch/arm/mach-imx/mm-imx5.c +++ b/arch/arm/mach-imx/mm-imx5.c @@ -15,6 +15,7 @@ #include <linux/init.h> #include <linux/clk.h> #include <linux/pinctrl/machine.h> +#include <linux/of_address.h> #include <asm/mach/map.h> @@ -88,8 +89,15 @@ void __init imx51_init_early(void) void __init imx53_init_early(void) { + struct device_node *np; + void __iomem *base; + mxc_set_cpu_type(MXC_CPU_MX53); - mxc_iomux_v3_init(MX53_IO_ADDRESS(MX53_IOMUXC_BASE_ADDR)); + + np = of_find_compatible_node(NULL, NULL, "fsl,imx53-iomuxc"); + base = of_iomap(np, 0); + WARN_ON(!base); + mxc_iomux_v3_init(base); imx_src_init(); } @@ -100,7 +108,14 @@ void __init mx51_init_irq(void) void __init mx53_init_irq(void) { - tzic_init_irq(MX53_IO_ADDRESS(MX53_TZIC_BASE_ADDR)); + struct device_node *np; + void __iomem *base; + + np = of_find_compatible_node(NULL, NULL, "fsl,imx53-tzic"); + base = of_iomap(np, 0); + WARN_ON(!base); + + tzic_init_irq(base); } static struct sdma_platform_data imx51_sdma_pdata __initdata = { diff --git a/arch/arm/mach-imx/mx31lilly-db.c b/arch/arm/mach-imx/mx31lilly-db.c index d4361b80c5f..649fe49ce85 100644 --- a/arch/arm/mach-imx/mx31lilly-db.c +++ b/arch/arm/mach-imx/mx31lilly-db.c @@ -130,8 +130,7 @@ static int mxc_mmc1_init(struct device *dev, gpio_direction_input(gpio_wp); ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)), - detect_irq, - IRQF_DISABLED | IRQF_TRIGGER_FALLING, + detect_irq, IRQF_TRIGGER_FALLING, "MMC detect", data); if (ret) goto exit_free_wp; diff --git a/arch/arm/mach-imx/mxc.h b/arch/arm/mach-imx/mxc.h index 8629e5be7ec..b08ab3ad4a6 100644 --- a/arch/arm/mach-imx/mxc.h +++ b/arch/arm/mach-imx/mxc.h @@ -34,6 +34,7 @@ #define MXC_CPU_MX35 35 #define MXC_CPU_MX51 51 #define MXC_CPU_MX53 53 +#define MXC_CPU_IMX6SL 0x60 #define MXC_CPU_IMX6DL 0x61 #define MXC_CPU_IMX6Q 0x63 @@ -152,6 +153,11 @@ extern unsigned int __mxc_cpu_type; #endif #ifndef __ASSEMBLY__ +static inline bool cpu_is_imx6sl(void) +{ + return __mxc_cpu_type == MXC_CPU_IMX6SL; +} + static inline bool cpu_is_imx6dl(void) { return __mxc_cpu_type == MXC_CPU_IMX6DL; diff --git a/arch/arm/mach-imx/pm-imx6q.c b/arch/arm/mach-imx/pm-imx6q.c index 204942749e2..aecd9f8037e 100644 --- a/arch/arm/mach-imx/pm-imx6q.c +++ b/arch/arm/mach-imx/pm-imx6q.c @@ -10,9 +10,15 @@ * http://www.gnu.org/copyleft/gpl.html */ +#include <linux/delay.h> #include <linux/init.h> #include <linux/io.h> +#include <linux/irq.h> +#include <linux/mfd/syscon.h> +#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h> #include <linux/of.h> +#include <linux/of_address.h> +#include <linux/regmap.h> #include <linux/suspend.h> #include <asm/cacheflush.h> #include <asm/proc-fns.h> @@ -22,6 +28,147 @@ #include "common.h" #include "hardware.h" +#define CCR 0x0 +#define BM_CCR_WB_COUNT (0x7 << 16) +#define BM_CCR_RBC_BYPASS_COUNT (0x3f << 21) +#define BM_CCR_RBC_EN (0x1 << 27) + +#define CLPCR 0x54 +#define BP_CLPCR_LPM 0 +#define BM_CLPCR_LPM (0x3 << 0) +#define BM_CLPCR_BYPASS_PMIC_READY (0x1 << 2) +#define BM_CLPCR_ARM_CLK_DIS_ON_LPM (0x1 << 5) +#define BM_CLPCR_SBYOS (0x1 << 6) +#define BM_CLPCR_DIS_REF_OSC (0x1 << 7) +#define BM_CLPCR_VSTBY (0x1 << 8) +#define BP_CLPCR_STBY_COUNT 9 +#define BM_CLPCR_STBY_COUNT (0x3 << 9) +#define BM_CLPCR_COSC_PWRDOWN (0x1 << 11) +#define BM_CLPCR_WB_PER_AT_LPM (0x1 << 16) +#define BM_CLPCR_WB_CORE_AT_LPM (0x1 << 17) +#define BM_CLPCR_BYP_MMDC_CH0_LPM_HS (0x1 << 19) +#define BM_CLPCR_BYP_MMDC_CH1_LPM_HS (0x1 << 21) +#define BM_CLPCR_MASK_CORE0_WFI (0x1 << 22) +#define BM_CLPCR_MASK_CORE1_WFI (0x1 << 23) +#define BM_CLPCR_MASK_CORE2_WFI (0x1 << 24) +#define BM_CLPCR_MASK_CORE3_WFI (0x1 << 25) +#define BM_CLPCR_MASK_SCU_IDLE (0x1 << 26) +#define BM_CLPCR_MASK_L2CC_IDLE (0x1 << 27) + +#define CGPR 0x64 +#define BM_CGPR_CHICKEN_BIT (0x1 << 17) + +static void __iomem *ccm_base; + +void imx6q_set_chicken_bit(void) +{ + u32 val = readl_relaxed(ccm_base + CGPR); + + val |= BM_CGPR_CHICKEN_BIT; + writel_relaxed(val, ccm_base + CGPR); +} + +static void imx6q_enable_rbc(bool enable) +{ + u32 val; + + /* + * need to mask all interrupts in GPC before + * operating RBC configurations + */ + imx_gpc_mask_all(); + + /* configure RBC enable bit */ + val = readl_relaxed(ccm_base + CCR); + val &= ~BM_CCR_RBC_EN; + val |= enable ? BM_CCR_RBC_EN : 0; + writel_relaxed(val, ccm_base + CCR); + + /* configure RBC count */ + val = readl_relaxed(ccm_base + CCR); + val &= ~BM_CCR_RBC_BYPASS_COUNT; + val |= enable ? BM_CCR_RBC_BYPASS_COUNT : 0; + writel(val, ccm_base + CCR); + + /* + * need to delay at least 2 cycles of CKIL(32K) + * due to hardware design requirement, which is + * ~61us, here we use 65us for safe + */ + udelay(65); + + /* restore GPC interrupt mask settings */ + imx_gpc_restore_all(); +} + +static void imx6q_enable_wb(bool enable) +{ + u32 val; + + /* configure well bias enable bit */ + val = readl_relaxed(ccm_base + CLPCR); + val &= ~BM_CLPCR_WB_PER_AT_LPM; + val |= enable ? BM_CLPCR_WB_PER_AT_LPM : 0; + writel_relaxed(val, ccm_base + CLPCR); + + /* configure well bias count */ + val = readl_relaxed(ccm_base + CCR); + val &= ~BM_CCR_WB_COUNT; + val |= enable ? BM_CCR_WB_COUNT : 0; + writel_relaxed(val, ccm_base + CCR); +} + +int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode) +{ + struct irq_desc *iomuxc_irq_desc; + u32 val = readl_relaxed(ccm_base + CLPCR); + + val &= ~BM_CLPCR_LPM; + switch (mode) { + case WAIT_CLOCKED: + break; + case WAIT_UNCLOCKED: + val |= 0x1 << BP_CLPCR_LPM; + val |= BM_CLPCR_ARM_CLK_DIS_ON_LPM; + break; + case STOP_POWER_ON: + val |= 0x2 << BP_CLPCR_LPM; + break; + case WAIT_UNCLOCKED_POWER_OFF: + val |= 0x1 << BP_CLPCR_LPM; + val &= ~BM_CLPCR_VSTBY; + val &= ~BM_CLPCR_SBYOS; + break; + case STOP_POWER_OFF: + val |= 0x2 << BP_CLPCR_LPM; + val |= 0x3 << BP_CLPCR_STBY_COUNT; + val |= BM_CLPCR_VSTBY; + val |= BM_CLPCR_SBYOS; + if (cpu_is_imx6sl()) { + val |= BM_CLPCR_BYPASS_PMIC_READY; + val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS; + } else { + val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS; + } + break; + default: + return -EINVAL; + } + + /* + * Unmask the always pending IOMUXC interrupt #32 as wakeup source to + * deassert dsm_request signal, so that we can ensure dsm_request + * is not asserted when we're going to write CLPCR register to set LPM. + * After setting up LPM bits, we need to mask this wakeup source. + */ + iomuxc_irq_desc = irq_to_desc(32); + imx_gpc_irq_unmask(&iomuxc_irq_desc->irq_data); + writel_relaxed(val, ccm_base + CLPCR); + imx_gpc_irq_mask(&iomuxc_irq_desc->irq_data); + + return 0; +} + static int imx6q_suspend_finish(unsigned long val) { cpu_do_idle(); @@ -33,14 +180,19 @@ static int imx6q_pm_enter(suspend_state_t state) switch (state) { case PM_SUSPEND_MEM: imx6q_set_lpm(STOP_POWER_OFF); + imx6q_enable_wb(true); + imx6q_enable_rbc(true); imx_gpc_pre_suspend(); imx_anatop_pre_suspend(); imx_set_cpu_jump(0, v7_cpu_resume); /* Zzz ... */ cpu_suspend(0, imx6q_suspend_finish); - imx_smp_prepare(); + if (cpu_is_imx6q() || cpu_is_imx6dl()) + imx_smp_prepare(); imx_anatop_post_resume(); imx_gpc_post_resume(); + imx6q_enable_rbc(false); + imx6q_enable_wb(false); imx6q_set_lpm(WAIT_CLOCKED); break; default: @@ -55,7 +207,29 @@ static const struct platform_suspend_ops imx6q_pm_ops = { .valid = suspend_valid_only_mem, }; +void __init imx6q_pm_set_ccm_base(void __iomem *base) +{ + ccm_base = base; +} + void __init imx6q_pm_init(void) { + struct regmap *gpr; + + WARN_ON(!ccm_base); + + /* + * Force IOMUXC irq pending, so that the interrupt to GPC can be + * used to deassert dsm_request signal when the signal gets + * asserted unexpectedly. + */ + gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr"); + if (!IS_ERR(gpr)) + regmap_update_bits(gpr, IOMUXC_GPR1, IMX6Q_GPR1_GINT, + IMX6Q_GPR1_GINT); + + /* Set initial power mode */ + imx6q_set_lpm(WAIT_CLOCKED); + suspend_set_ops(&imx6q_pm_ops); } diff --git a/arch/arm/mach-imx/src.c b/arch/arm/mach-imx/src.c index 10a6b1a8c5a..4754373e7e7 100644 --- a/arch/arm/mach-imx/src.c +++ b/arch/arm/mach-imx/src.c @@ -91,6 +91,7 @@ void imx_enable_cpu(int cpu, bool enable) spin_lock(&scr_lock); val = readl_relaxed(src_base + SRC_SCR); val = enable ? val | mask : val & ~mask; + val |= 1 << (BP_SRC_SCR_CORE1_RST + cpu - 1); writel_relaxed(val, src_base + SRC_SCR); spin_unlock(&scr_lock); } diff --git a/arch/arm/mach-imx/system.c b/arch/arm/mach-imx/system.c index 80c177c36c5..e6edcd38b28 100644 --- a/arch/arm/mach-imx/system.c +++ b/arch/arm/mach-imx/system.c @@ -42,6 +42,9 @@ void mxc_restart(enum reboot_mode mode, const char *cmd) { unsigned int wcr_enable; + if (cpu_is_imx6q() || cpu_is_imx6dl()) + imx_src_prepare_restart(); + if (wdog_clk) clk_enable(wdog_clk); @@ -52,6 +55,8 @@ void mxc_restart(enum reboot_mode mode, const char *cmd) /* Assert SRS signal */ __raw_writew(wcr_enable, wdog_base); + /* write twice to ensure the request will not get ignored */ + __raw_writew(wcr_enable, wdog_base); /* wait for reset to assert... */ mdelay(500); diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c index cd46529e9ea..9b6638aadea 100644 --- a/arch/arm/mach-imx/time.c +++ b/arch/arm/mach-imx/time.c @@ -250,7 +250,7 @@ static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id) static struct irqaction mxc_timer_irq = { .name = "i.MX Timer Tick", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .flags = IRQF_TIMER | IRQF_IRQPOLL, .handler = mxc_timer_interrupt, }; diff --git a/arch/arm/mach-integrator/include/mach/cm.h b/arch/arm/mach-integrator/cm.h index 202e6a57f10..4ecff7bff48 100644 --- a/arch/arm/mach-integrator/include/mach/cm.h +++ b/arch/arm/mach-integrator/cm.h @@ -1,9 +1,12 @@ /* - * update the core module control register. + * access the core module control register. */ +u32 cm_get(void); void cm_control(u32, u32); -#define CM_CTRL __io_address(INTEGRATOR_HDR_CTRL) +struct device_node; +void cm_init(void); +void cm_clear_irqs(void); #define CM_CTRL_LED (1 << 0) #define CM_CTRL_nMBDET (1 << 1) diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c index 4cdfd736592..00ddf20ed91 100644 --- a/arch/arm/mach-integrator/core.c +++ b/arch/arm/mach-integrator/core.c @@ -22,77 +22,30 @@ #include <linux/amba/serial.h> #include <linux/io.h> #include <linux/stat.h> +#include <linux/of.h> +#include <linux/of_address.h> #include <mach/hardware.h> #include <mach/platform.h> -#include <mach/cm.h> -#include <mach/irqs.h> #include <asm/mach-types.h> #include <asm/mach/time.h> #include <asm/pgtable.h> +#include "cm.h" #include "common.h" -#ifdef CONFIG_ATAGS - -#define INTEGRATOR_RTC_IRQ { IRQ_RTCINT } -#define INTEGRATOR_UART0_IRQ { IRQ_UARTINT0 } -#define INTEGRATOR_UART1_IRQ { IRQ_UARTINT1 } -#define KMI0_IRQ { IRQ_KMIINT0 } -#define KMI1_IRQ { IRQ_KMIINT1 } - -static AMBA_APB_DEVICE(rtc, "rtc", 0, - INTEGRATOR_RTC_BASE, INTEGRATOR_RTC_IRQ, NULL); - -static AMBA_APB_DEVICE(uart0, "uart0", 0, - INTEGRATOR_UART0_BASE, INTEGRATOR_UART0_IRQ, NULL); - -static AMBA_APB_DEVICE(uart1, "uart1", 0, - INTEGRATOR_UART1_BASE, INTEGRATOR_UART1_IRQ, NULL); - -static AMBA_APB_DEVICE(kmi0, "kmi0", 0, KMI0_BASE, KMI0_IRQ, NULL); -static AMBA_APB_DEVICE(kmi1, "kmi1", 0, KMI1_BASE, KMI1_IRQ, NULL); - -static struct amba_device *amba_devs[] __initdata = { - &rtc_device, - &uart0_device, - &uart1_device, - &kmi0_device, - &kmi1_device, -}; +static DEFINE_RAW_SPINLOCK(cm_lock); +static void __iomem *cm_base; -int __init integrator_init(bool is_cp) +/** + * cm_get - get the value from the CM_CTRL register + */ +u32 cm_get(void) { - int i; - - /* - * The Integrator/AP lacks necessary AMBA PrimeCell IDs, so we need to - * hard-code them. The Integator/CP and forward have proper cell IDs. - * Else we leave them undefined to the bus driver can autoprobe them. - */ - if (!is_cp && IS_ENABLED(CONFIG_ARCH_INTEGRATOR_AP)) { - rtc_device.periphid = 0x00041030; - uart0_device.periphid = 0x00041010; - uart1_device.periphid = 0x00041010; - kmi0_device.periphid = 0x00041050; - kmi1_device.periphid = 0x00041050; - uart0_device.dev.platform_data = &ap_uart_data; - uart1_device.dev.platform_data = &ap_uart_data; - } - - for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { - struct amba_device *d = amba_devs[i]; - amba_device_register(d, &iomem_resource); - } - - return 0; + return readl(cm_base + INTEGRATOR_HDR_CTRL_OFFSET); } -#endif - -static DEFINE_RAW_SPINLOCK(cm_lock); - /** * cm_control - update the CM_CTRL register. * @mask: bits to change @@ -104,12 +57,80 @@ void cm_control(u32 mask, u32 set) u32 val; raw_spin_lock_irqsave(&cm_lock, flags); - val = readl(CM_CTRL) & ~mask; - writel(val | set, CM_CTRL); + val = readl(cm_base + INTEGRATOR_HDR_CTRL_OFFSET) & ~mask; + writel(val | set, cm_base + INTEGRATOR_HDR_CTRL_OFFSET); raw_spin_unlock_irqrestore(&cm_lock, flags); } -EXPORT_SYMBOL(cm_control); +static const char *integrator_arch_str(u32 id) +{ + switch ((id >> 16) & 0xff) { + case 0x00: + return "ASB little-endian"; + case 0x01: + return "AHB little-endian"; + case 0x03: + return "AHB-Lite system bus, bi-endian"; + case 0x04: + return "AHB"; + case 0x08: + return "AHB system bus, ASB processor bus"; + default: + return "Unknown"; + } +} + +static const char *integrator_fpga_str(u32 id) +{ + switch ((id >> 12) & 0xf) { + case 0x01: + return "XC4062"; + case 0x02: + return "XC4085"; + case 0x03: + return "XVC600"; + case 0x04: + return "EPM7256AE (Altera PLD)"; + default: + return "Unknown"; + } +} + +void cm_clear_irqs(void) +{ + /* disable core module IRQs */ + writel(0xffffffffU, cm_base + INTEGRATOR_HDR_IC_OFFSET + + IRQ_ENABLE_CLEAR); +} + +static const struct of_device_id cm_match[] = { + { .compatible = "arm,core-module-integrator"}, + { }, +}; + +void cm_init(void) +{ + struct device_node *cm = of_find_matching_node(NULL, cm_match); + u32 val; + + if (!cm) { + pr_crit("no core module node found in device tree\n"); + return; + } + cm_base = of_iomap(cm, 0); + if (!cm_base) { + pr_crit("could not remap core module\n"); + return; + } + cm_clear_irqs(); + val = readl(cm_base + INTEGRATOR_HDR_ID_OFFSET); + pr_info("Detected ARM core module:\n"); + pr_info(" Manufacturer: %02x\n", (val >> 24)); + pr_info(" Architecture: %s\n", integrator_arch_str(val)); + pr_info(" FPGA: %s\n", integrator_fpga_str(val)); + pr_info(" Build: %02x\n", (val >> 4) & 0xFF); + pr_info(" Rev: %c\n", ('A' + (val & 0x03))); +} /* * We need to stop things allocating the low memory; ideally we need a @@ -145,27 +166,7 @@ static ssize_t intcp_get_arch(struct device *dev, struct device_attribute *attr, char *buf) { - const char *arch; - - switch ((integrator_id >> 16) & 0xff) { - case 0x00: - arch = "ASB little-endian"; - break; - case 0x01: - arch = "AHB little-endian"; - break; - case 0x03: - arch = "AHB-Lite system bus, bi-endian"; - break; - case 0x04: - arch = "AHB"; - break; - default: - arch = "Unknown"; - break; - } - - return sprintf(buf, "%s\n", arch); + return sprintf(buf, "%s\n", integrator_arch_str(integrator_id)); } static struct device_attribute intcp_arch_attr = @@ -175,24 +176,7 @@ static ssize_t intcp_get_fpga(struct device *dev, struct device_attribute *attr, char *buf) { - const char *fpga; - - switch ((integrator_id >> 12) & 0xf) { - case 0x01: - fpga = "XC4062"; - break; - case 0x02: - fpga = "XC4085"; - break; - case 0x04: - fpga = "EPM7256AE (Altera PLD)"; - break; - default: - fpga = "Unknown"; - break; - } - - return sprintf(buf, "%s\n", fpga); + return sprintf(buf, "%s\n", integrator_fpga_str(integrator_id)); } static struct device_attribute intcp_fpga_attr = diff --git a/arch/arm/mach-integrator/include/mach/irqs.h b/arch/arm/mach-integrator/include/mach/irqs.h deleted file mode 100644 index eff0adad9ae..00000000000 --- a/arch/arm/mach-integrator/include/mach/irqs.h +++ /dev/null @@ -1,81 +0,0 @@ -/* - * arch/arm/mach-integrator/include/mach/irqs.h - * - * Copyright (C) 1999 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -/* - * Interrupt numbers, all of the above are just static reservations - * used so they can be encoded into device resources. They will finally - * be done away with when switching to device tree. - */ -#define IRQ_PIC_START 64 -#define IRQ_SOFTINT (IRQ_PIC_START+0) -#define IRQ_UARTINT0 (IRQ_PIC_START+1) -#define IRQ_UARTINT1 (IRQ_PIC_START+2) -#define IRQ_KMIINT0 (IRQ_PIC_START+3) -#define IRQ_KMIINT1 (IRQ_PIC_START+4) -#define IRQ_TIMERINT0 (IRQ_PIC_START+5) -#define IRQ_TIMERINT1 (IRQ_PIC_START+6) -#define IRQ_TIMERINT2 (IRQ_PIC_START+7) -#define IRQ_RTCINT (IRQ_PIC_START+8) -#define IRQ_AP_EXPINT0 (IRQ_PIC_START+9) -#define IRQ_AP_EXPINT1 (IRQ_PIC_START+10) -#define IRQ_AP_EXPINT2 (IRQ_PIC_START+11) -#define IRQ_AP_EXPINT3 (IRQ_PIC_START+12) -#define IRQ_AP_PCIINT0 (IRQ_PIC_START+13) -#define IRQ_AP_PCIINT1 (IRQ_PIC_START+14) -#define IRQ_AP_PCIINT2 (IRQ_PIC_START+15) -#define IRQ_AP_PCIINT3 (IRQ_PIC_START+16) -#define IRQ_AP_V3INT (IRQ_PIC_START+17) -#define IRQ_AP_CPINT0 (IRQ_PIC_START+18) -#define IRQ_AP_CPINT1 (IRQ_PIC_START+19) -#define IRQ_AP_LBUSTIMEOUT (IRQ_PIC_START+20) -#define IRQ_AP_APCINT (IRQ_PIC_START+21) -#define IRQ_CP_CLCDCINT (IRQ_PIC_START+22) -#define IRQ_CP_MMCIINT0 (IRQ_PIC_START+23) -#define IRQ_CP_MMCIINT1 (IRQ_PIC_START+24) -#define IRQ_CP_AACIINT (IRQ_PIC_START+25) -#define IRQ_CP_CPPLDINT (IRQ_PIC_START+26) -#define IRQ_CP_ETHINT (IRQ_PIC_START+27) -#define IRQ_CP_TSPENINT (IRQ_PIC_START+28) -#define IRQ_PIC_END (IRQ_PIC_START+28) - -#define IRQ_CIC_START (IRQ_PIC_END+1) -#define IRQ_CM_SOFTINT (IRQ_CIC_START+0) -#define IRQ_CM_COMMRX (IRQ_CIC_START+1) -#define IRQ_CM_COMMTX (IRQ_CIC_START+2) -#define IRQ_CIC_END (IRQ_CIC_START+2) - -/* - * IntegratorCP only - */ -#define IRQ_SIC_START (IRQ_CIC_END+1) -#define IRQ_SIC_CP_SOFTINT (IRQ_SIC_START+0) -#define IRQ_SIC_CP_RI0 (IRQ_SIC_START+1) -#define IRQ_SIC_CP_RI1 (IRQ_SIC_START+2) -#define IRQ_SIC_CP_CARDIN (IRQ_SIC_START+3) -#define IRQ_SIC_CP_LMINT0 (IRQ_SIC_START+4) -#define IRQ_SIC_CP_LMINT1 (IRQ_SIC_START+5) -#define IRQ_SIC_CP_LMINT2 (IRQ_SIC_START+6) -#define IRQ_SIC_CP_LMINT3 (IRQ_SIC_START+7) -#define IRQ_SIC_CP_LMINT4 (IRQ_SIC_START+8) -#define IRQ_SIC_CP_LMINT5 (IRQ_SIC_START+9) -#define IRQ_SIC_CP_LMINT6 (IRQ_SIC_START+10) -#define IRQ_SIC_CP_LMINT7 (IRQ_SIC_START+11) -#define IRQ_SIC_END (IRQ_SIC_START+11) diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index d9e95e612fc..d50dc2dbfd8 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -51,13 +51,13 @@ #include <asm/mach-types.h> #include <mach/lm.h> -#include <mach/irqs.h> #include <asm/mach/arch.h> #include <asm/mach/irq.h> #include <asm/mach/map.h> #include <asm/mach/time.h> +#include "cm.h" #include "common.h" #include "pci_v3.h" @@ -146,7 +146,7 @@ static int irq_suspend(void) static void irq_resume(void) { /* disable all irq sources */ - writel(-1, VA_CMIC_BASE + IRQ_ENABLE_CLEAR); + cm_clear_irqs(); writel(-1, VA_IC_BASE + IRQ_ENABLE_CLEAR); writel(-1, VA_IC_BASE + FIQ_ENABLE_CLEAR); @@ -402,8 +402,6 @@ void __init ap_init_early(void) { } -#ifdef CONFIG_OF - static void __init ap_of_timer_init(void) { struct device_node *node; @@ -450,8 +448,7 @@ static const struct of_device_id fpga_irq_of_match[] __initconst = { static void __init ap_init_irq_of(void) { - /* disable core module IRQs */ - writel(0xffffffffU, VA_CMIC_BASE + IRQ_ENABLE_CLEAR); + cm_init(); of_irq_init(fpga_irq_of_match); integrator_clk_init(false); } @@ -473,6 +470,11 @@ static struct of_dev_auxdata ap_auxdata_lookup[] __initdata = { { /* sentinel */ }, }; +static const struct of_device_id ap_syscon_match[] = { + { .compatible = "arm,integrator-ap-syscon"}, + { }, +}; + static void __init ap_init_of(void) { unsigned long sc_dec; @@ -489,7 +491,8 @@ static void __init ap_init_of(void) root = of_find_node_by_path("/"); if (!root) return; - syscon = of_find_node_by_path("/syscon"); + + syscon = of_find_matching_node(root, ap_syscon_match); if (!syscon) return; @@ -541,7 +544,7 @@ static void __init ap_init_of(void) lmdev->resource.start = 0xc0000000 + 0x10000000 * i; lmdev->resource.end = lmdev->resource.start + 0x0fffffff; lmdev->resource.flags = IORESOURCE_MEM; - lmdev->irq = IRQ_AP_EXPINT0 + i; + lmdev->irq = irq_of_parse_and_map(syscon, i); lmdev->id = i; lm_device_register(lmdev); @@ -564,136 +567,3 @@ DT_MACHINE_START(INTEGRATOR_AP_DT, "ARM Integrator/AP (Device Tree)") .restart = integrator_restart, .dt_compat = ap_dt_board_compat, MACHINE_END - -#endif - -#ifdef CONFIG_ATAGS - -/* - * For the ATAG boot some static mappings are needed. This will - * go away with the ATAG support down the road. - */ - -static struct map_desc ap_io_desc_atag[] __initdata = { - { - .virtual = IO_ADDRESS(INTEGRATOR_SC_BASE), - .pfn = __phys_to_pfn(INTEGRATOR_SC_BASE), - .length = SZ_4K, - .type = MT_DEVICE - }, -}; - -static void __init ap_map_io_atag(void) -{ - iotable_init(ap_io_desc_atag, ARRAY_SIZE(ap_io_desc_atag)); - ap_map_io(); -} - -/* - * This is where non-devicetree initialization code is collected and stashed - * for eventual deletion. - */ - -static struct platform_device pci_v3_device = { - .name = "pci-v3", - .id = 0, -}; - -static struct resource cfi_flash_resource = { - .start = INTEGRATOR_FLASH_BASE, - .end = INTEGRATOR_FLASH_BASE + INTEGRATOR_FLASH_SIZE - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device cfi_flash_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &ap_flash_data, - }, - .num_resources = 1, - .resource = &cfi_flash_resource, -}; - -static void __init ap_timer_init(void) -{ - struct clk *clk; - unsigned long rate; - - clk = clk_get_sys("ap_timer", NULL); - BUG_ON(IS_ERR(clk)); - clk_prepare_enable(clk); - rate = clk_get_rate(clk); - - writel(0, TIMER0_VA_BASE + TIMER_CTRL); - writel(0, TIMER1_VA_BASE + TIMER_CTRL); - writel(0, TIMER2_VA_BASE + TIMER_CTRL); - - integrator_clocksource_init(rate, (void __iomem *)TIMER2_VA_BASE); - integrator_clockevent_init(rate, (void __iomem *)TIMER1_VA_BASE, - IRQ_TIMERINT1); -} - -#define INTEGRATOR_SC_VALID_INT 0x003fffff - -static void __init ap_init_irq(void) -{ - /* Disable all interrupts initially. */ - /* Do the core module ones */ - writel(-1, VA_CMIC_BASE + IRQ_ENABLE_CLEAR); - - /* do the header card stuff next */ - writel(-1, VA_IC_BASE + IRQ_ENABLE_CLEAR); - writel(-1, VA_IC_BASE + FIQ_ENABLE_CLEAR); - - fpga_irq_init(VA_IC_BASE, "SC", IRQ_PIC_START, - -1, INTEGRATOR_SC_VALID_INT, NULL); - integrator_clk_init(false); -} - -static void __init ap_init(void) -{ - unsigned long sc_dec; - int i; - - platform_device_register(&pci_v3_device); - platform_device_register(&cfi_flash_device); - - ap_syscon_base = __io_address(INTEGRATOR_SC_BASE); - sc_dec = readl(ap_syscon_base + INTEGRATOR_SC_DEC_OFFSET); - for (i = 0; i < 4; i++) { - struct lm_device *lmdev; - - if ((sc_dec & (16 << i)) == 0) - continue; - - lmdev = kzalloc(sizeof(struct lm_device), GFP_KERNEL); - if (!lmdev) - continue; - - lmdev->resource.start = 0xc0000000 + 0x10000000 * i; - lmdev->resource.end = lmdev->resource.start + 0x0fffffff; - lmdev->resource.flags = IORESOURCE_MEM; - lmdev->irq = IRQ_AP_EXPINT0 + i; - lmdev->id = i; - - lm_device_register(lmdev); - } - - integrator_init(false); -} - -MACHINE_START(INTEGRATOR, "ARM-Integrator") - /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .atag_offset = 0x100, - .reserve = integrator_reserve, - .map_io = ap_map_io_atag, - .init_early = ap_init_early, - .init_irq = ap_init_irq, - .handle_irq = fpga_handle_irq, - .init_time = ap_timer_init, - .init_machine = ap_init, - .restart = integrator_restart, -MACHINE_END - -#endif diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index 8c60fcb08a9..1df6e7602ca 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -36,9 +36,7 @@ #include <asm/hardware/arm_timer.h> #include <asm/hardware/icst.h> -#include <mach/cm.h> #include <mach/lm.h> -#include <mach/irqs.h> #include <asm/mach/arch.h> #include <asm/mach/irq.h> @@ -50,6 +48,7 @@ #include <plat/clcd.h> #include <plat/sched_clock.h> +#include "cm.h" #include "common.h" /* Base address to the CP controller */ @@ -249,7 +248,6 @@ static void __init intcp_init_early(void) #endif } -#ifdef CONFIG_OF static const struct of_device_id fpga_irq_of_match[] __initconst = { { .compatible = "arm,versatile-fpga-irq", .data = fpga_irq_of_init, }, { /* Sentinel */ } @@ -257,6 +255,7 @@ static const struct of_device_id fpga_irq_of_match[] __initconst = { static void __init intcp_init_irq_of(void) { + cm_init(); of_irq_init(fpga_irq_of_match); integrator_clk_init(true); } @@ -287,6 +286,11 @@ static struct of_dev_auxdata intcp_auxdata_lookup[] __initdata = { { /* sentinel */ }, }; +static const struct of_device_id intcp_syscon_match[] = { + { .compatible = "arm,integrator-cp-syscon"}, + { }, +}; + static void __init intcp_init_of(void) { struct device_node *root; @@ -301,7 +305,8 @@ static void __init intcp_init_of(void) root = of_find_node_by_path("/"); if (!root) return; - cpcon = of_find_node_by_path("/cpcon"); + + cpcon = of_find_matching_node(root, intcp_syscon_match); if (!cpcon) return; @@ -354,175 +359,3 @@ DT_MACHINE_START(INTEGRATOR_CP_DT, "ARM Integrator/CP (Device Tree)") .restart = integrator_restart, .dt_compat = intcp_dt_board_compat, MACHINE_END - -#endif - -#ifdef CONFIG_ATAGS - -/* - * For the ATAG boot some static mappings are needed. This will - * go away with the ATAG support down the road. - */ - -static struct map_desc intcp_io_desc_atag[] __initdata = { - { - .virtual = IO_ADDRESS(INTEGRATOR_CP_CTL_BASE), - .pfn = __phys_to_pfn(INTEGRATOR_CP_CTL_BASE), - .length = SZ_4K, - .type = MT_DEVICE - }, -}; - -static void __init intcp_map_io_atag(void) -{ - iotable_init(intcp_io_desc_atag, ARRAY_SIZE(intcp_io_desc_atag)); - intcp_con_base = __io_address(INTEGRATOR_CP_CTL_BASE); - intcp_map_io(); -} - - -/* - * This is where non-devicetree initialization code is collected and stashed - * for eventual deletion. - */ - -#define INTCP_FLASH_SIZE SZ_32M - -static struct resource intcp_flash_resource = { - .start = INTCP_PA_FLASH_BASE, - .end = INTCP_PA_FLASH_BASE + INTCP_FLASH_SIZE - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device intcp_flash_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &intcp_flash_data, - }, - .num_resources = 1, - .resource = &intcp_flash_resource, -}; - -#define INTCP_ETH_SIZE 0x10 - -static struct resource smc91x_resources[] = { - [0] = { - .start = INTEGRATOR_CP_ETH_BASE, - .end = INTEGRATOR_CP_ETH_BASE + INTCP_ETH_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_CP_ETHINT, - .end = IRQ_CP_ETHINT, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device smc91x_device = { - .name = "smc91x", - .id = 0, - .num_resources = ARRAY_SIZE(smc91x_resources), - .resource = smc91x_resources, -}; - -static struct platform_device *intcp_devs[] __initdata = { - &intcp_flash_device, - &smc91x_device, -}; - -#define INTCP_VA_CIC_BASE __io_address(INTEGRATOR_HDR_BASE + 0x40) -#define INTCP_VA_PIC_BASE __io_address(INTEGRATOR_IC_BASE) -#define INTCP_VA_SIC_BASE __io_address(INTEGRATOR_CP_SIC_BASE) - -static void __init intcp_init_irq(void) -{ - u32 pic_mask, cic_mask, sic_mask; - - /* These masks are for the HW IRQ registers */ - pic_mask = ~((~0u) << (11 - 0)); - pic_mask |= (~((~0u) << (29 - 22))) << 22; - cic_mask = ~((~0u) << (1 + IRQ_CIC_END - IRQ_CIC_START)); - sic_mask = ~((~0u) << (1 + IRQ_SIC_END - IRQ_SIC_START)); - - /* - * Disable all interrupt sources - */ - writel(0xffffffff, INTCP_VA_PIC_BASE + IRQ_ENABLE_CLEAR); - writel(0xffffffff, INTCP_VA_PIC_BASE + FIQ_ENABLE_CLEAR); - writel(0xffffffff, INTCP_VA_CIC_BASE + IRQ_ENABLE_CLEAR); - writel(0xffffffff, INTCP_VA_CIC_BASE + FIQ_ENABLE_CLEAR); - writel(sic_mask, INTCP_VA_SIC_BASE + IRQ_ENABLE_CLEAR); - writel(sic_mask, INTCP_VA_SIC_BASE + FIQ_ENABLE_CLEAR); - - fpga_irq_init(INTCP_VA_PIC_BASE, "PIC", IRQ_PIC_START, - -1, pic_mask, NULL); - - fpga_irq_init(INTCP_VA_CIC_BASE, "CIC", IRQ_CIC_START, - -1, cic_mask, NULL); - - fpga_irq_init(INTCP_VA_SIC_BASE, "SIC", IRQ_SIC_START, - IRQ_CP_CPPLDINT, sic_mask, NULL); - - integrator_clk_init(true); -} - -#define TIMER0_VA_BASE __io_address(INTEGRATOR_TIMER0_BASE) -#define TIMER1_VA_BASE __io_address(INTEGRATOR_TIMER1_BASE) -#define TIMER2_VA_BASE __io_address(INTEGRATOR_TIMER2_BASE) - -static void __init cp_timer_init(void) -{ - writel(0, TIMER0_VA_BASE + TIMER_CTRL); - writel(0, TIMER1_VA_BASE + TIMER_CTRL); - writel(0, TIMER2_VA_BASE + TIMER_CTRL); - - sp804_clocksource_init(TIMER2_VA_BASE, "timer2"); - sp804_clockevents_init(TIMER1_VA_BASE, IRQ_TIMERINT1, "timer1"); -} - -#define INTEGRATOR_CP_MMC_IRQS { IRQ_CP_MMCIINT0, IRQ_CP_MMCIINT1 } -#define INTEGRATOR_CP_AACI_IRQS { IRQ_CP_AACIINT } - -static AMBA_APB_DEVICE(mmc, "mmci", 0, INTEGRATOR_CP_MMC_BASE, - INTEGRATOR_CP_MMC_IRQS, &mmc_data); - -static AMBA_APB_DEVICE(aaci, "aaci", 0, INTEGRATOR_CP_AACI_BASE, - INTEGRATOR_CP_AACI_IRQS, NULL); - -static AMBA_AHB_DEVICE(clcd, "clcd", 0, INTCP_PA_CLCD_BASE, - { IRQ_CP_CLCDCINT }, &clcd_data); - -static struct amba_device *amba_devs[] __initdata = { - &mmc_device, - &aaci_device, - &clcd_device, -}; - -static void __init intcp_init(void) -{ - int i; - - platform_add_devices(intcp_devs, ARRAY_SIZE(intcp_devs)); - - for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { - struct amba_device *d = amba_devs[i]; - amba_device_register(d, &iomem_resource); - } - integrator_init(true); -} - -MACHINE_START(CINTEGRATOR, "ARM-IntegratorCP") - /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .atag_offset = 0x100, - .reserve = integrator_reserve, - .map_io = intcp_map_io_atag, - .init_early = intcp_init_early, - .init_irq = intcp_init_irq, - .handle_irq = fpga_handle_irq, - .init_time = cp_timer_init, - .init_machine = intcp_init, - .restart = integrator_restart, -MACHINE_END - -#endif diff --git a/arch/arm/mach-integrator/leds.c b/arch/arm/mach-integrator/leds.c index 7a7f6d3273b..cb6ac58f5e0 100644 --- a/arch/arm/mach-integrator/leds.c +++ b/arch/arm/mach-integrator/leds.c @@ -11,10 +11,11 @@ #include <linux/slab.h> #include <linux/leds.h> -#include <mach/cm.h> #include <mach/hardware.h> #include <mach/platform.h> +#include "cm.h" + #if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS) #define ALPHA_REG __io_address(INTEGRATOR_DBG_BASE) @@ -78,7 +79,7 @@ static void cm_led_set(struct led_classdev *cdev, static enum led_brightness cm_led_get(struct led_classdev *cdev) { - u32 reg = readl(CM_CTRL); + u32 reg = cm_get(); return (reg & CM_CTRL_LED) ? LED_FULL : LED_OFF; } diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c index bef100527c4..c9c5a33bc80 100644 --- a/arch/arm/mach-integrator/pci_v3.c +++ b/arch/arm/mach-integrator/pci_v3.c @@ -36,7 +36,6 @@ #include <mach/hardware.h> #include <mach/platform.h> -#include <mach/irqs.h> #include <asm/mach/map.h> #include <asm/signal.h> @@ -605,7 +604,7 @@ v3_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) return 1; } -static irqreturn_t v3_irq(int dummy, void *devid) +static irqreturn_t v3_irq(int irq, void *devid) { #ifdef CONFIG_DEBUG_LL struct pt_regs *regs = get_irq_regs(); @@ -615,7 +614,7 @@ static irqreturn_t v3_irq(int dummy, void *devid) extern void printascii(const char *); sprintf(buf, "V3 int %d: pc=0x%08lx [%08lx] LBFADDR=%08x LBFCODE=%02x " - "ISTAT=%02x\n", IRQ_AP_V3INT, pc, instr, + "ISTAT=%02x\n", irq, pc, instr, __raw_readl(ap_syscon_base + INTEGRATOR_SC_LBFADDR_OFFSET), __raw_readl(ap_syscon_base + INTEGRATOR_SC_LBFCODE_OFFSET) & 255, v3_readb(V3_LB_ISTAT)); @@ -809,32 +808,6 @@ static u8 __init pci_v3_swizzle(struct pci_dev *dev, u8 *pinp) return pci_common_swizzle(dev, pinp); } -static int irq_tab[4] __initdata = { - IRQ_AP_PCIINT0, IRQ_AP_PCIINT1, IRQ_AP_PCIINT2, IRQ_AP_PCIINT3 -}; - -/* - * map the specified device/slot/pin to an IRQ. This works out such - * that slot 9 pin 1 is INT0, pin 2 is INT1, and slot 10 pin 1 is INT1. - */ -static int __init pci_v3_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - int intnr = ((slot - 9) + (pin - 1)) & 3; - - return irq_tab[intnr]; -} - -static struct hw_pci pci_v3 __initdata = { - .swizzle = pci_v3_swizzle, - .setup = pci_v3_setup, - .nr_controllers = 1, - .ops = &pci_v3_ops, - .preinit = pci_v3_preinit, - .postinit = pci_v3_postinit, -}; - -#ifdef CONFIG_OF - static int __init pci_v3_map_irq_dt(const struct pci_dev *dev, u8 slot, u8 pin) { struct of_irq oirq; @@ -851,14 +824,36 @@ static int __init pci_v3_map_irq_dt(const struct pci_dev *dev, u8 slot, u8 pin) oirq.size); } -static int __init pci_v3_dtprobe(struct platform_device *pdev, - struct device_node *np) +static struct hw_pci pci_v3 __initdata = { + .swizzle = pci_v3_swizzle, + .setup = pci_v3_setup, + .nr_controllers = 1, + .ops = &pci_v3_ops, + .preinit = pci_v3_preinit, + .postinit = pci_v3_postinit, +}; + +static int __init pci_v3_probe(struct platform_device *pdev) { + struct device_node *np = pdev->dev.of_node; struct of_pci_range_parser parser; struct of_pci_range range; struct resource *res; int irq, ret; + /* Remap the Integrator system controller */ + ap_syscon_base = devm_ioremap(&pdev->dev, INTEGRATOR_SC_BASE, 0x100); + if (!ap_syscon_base) { + dev_err(&pdev->dev, "unable to remap the AP syscon for PCIv3\n"); + return -ENODEV; + } + + /* Device tree probe path */ + if (!np) { + dev_err(&pdev->dev, "no device tree node for PCIv3\n"); + return -ENODEV; + } + if (of_pci_range_parser_init(&parser, np)) return -EINVAL; @@ -925,76 +920,6 @@ static int __init pci_v3_dtprobe(struct platform_device *pdev, return 0; } -#else - -static inline int pci_v3_dtprobe(struct platform_device *pdev, - struct device_node *np) -{ - return -EINVAL; -} - -#endif - -static int __init pci_v3_probe(struct platform_device *pdev) -{ - struct device_node *np = pdev->dev.of_node; - int ret; - - /* Remap the Integrator system controller */ - ap_syscon_base = ioremap(INTEGRATOR_SC_BASE, 0x100); - if (!ap_syscon_base) { - dev_err(&pdev->dev, "unable to remap the AP syscon for PCIv3\n"); - return -ENODEV; - } - - /* Device tree probe path */ - if (np) - return pci_v3_dtprobe(pdev, np); - - pci_v3_base = devm_ioremap(&pdev->dev, PHYS_PCI_V3_BASE, SZ_64K); - if (!pci_v3_base) { - dev_err(&pdev->dev, "unable to remap PCIv3 base\n"); - return -ENODEV; - } - - ret = devm_request_irq(&pdev->dev, IRQ_AP_V3INT, v3_irq, 0, "V3", NULL); - if (ret) { - dev_err(&pdev->dev, "unable to grab PCI error interrupt: %d\n", - ret); - return -ENODEV; - } - - conf_mem.name = "PCIv3 config"; - conf_mem.start = PHYS_PCI_CONFIG_BASE; - conf_mem.end = PHYS_PCI_CONFIG_BASE + SZ_16M - 1; - conf_mem.flags = IORESOURCE_MEM; - - io_mem.name = "PCIv3 I/O"; - io_mem.start = PHYS_PCI_IO_BASE; - io_mem.end = PHYS_PCI_IO_BASE + SZ_16M - 1; - io_mem.flags = IORESOURCE_MEM; - - non_mem_pci = 0x00000000; - non_mem_pci_sz = SZ_256M; - non_mem.name = "PCIv3 non-prefetched mem"; - non_mem.start = PHYS_PCI_MEM_BASE; - non_mem.end = PHYS_PCI_MEM_BASE + SZ_256M - 1; - non_mem.flags = IORESOURCE_MEM; - - pre_mem_pci = 0x10000000; - pre_mem_pci_sz = SZ_256M; - pre_mem.name = "PCIv3 prefetched mem"; - pre_mem.start = PHYS_PCI_PRE_BASE + SZ_256M; - pre_mem.end = PHYS_PCI_PRE_BASE + SZ_256M - 1; - pre_mem.flags = IORESOURCE_MEM | IORESOURCE_PREFETCH; - - pci_v3.map_irq = pci_v3_map_irq; - - pci_common_init_dev(&pdev->dev, &pci_v3); - - return 0; -} - static const struct of_device_id pci_ids[] = { { .compatible = "v3,v360epc-pci", }, {}, diff --git a/arch/arm/mach-keystone/Kconfig b/arch/arm/mach-keystone/Kconfig index 366d1a3b418..f20c53e75ed 100644 --- a/arch/arm/mach-keystone/Kconfig +++ b/arch/arm/mach-keystone/Kconfig @@ -9,6 +9,8 @@ config ARCH_KEYSTONE select GENERIC_CLOCKEVENTS select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_ERRATA_798181 if SMP + select COMMON_CLK_KEYSTONE + select TI_EDMA help Support for boards based on the Texas Instruments Keystone family of SoCs. diff --git a/arch/arm/mach-keystone/Makefile b/arch/arm/mach-keystone/Makefile index ddc52b05dc8..25d92396fbf 100644 --- a/arch/arm/mach-keystone/Makefile +++ b/arch/arm/mach-keystone/Makefile @@ -4,3 +4,6 @@ plus_sec := $(call as-instr,.arch_extension sec,+sec) AFLAGS_smc.o :=-Wa,-march=armv7-a$(plus_sec) obj-$(CONFIG_SMP) += platsmp.o + +# PM domain driver for Keystone SOCs +obj-$(CONFIG_ARCH_KEYSTONE) += pm_domain.o diff --git a/arch/arm/mach-keystone/pm_domain.c b/arch/arm/mach-keystone/pm_domain.c new file mode 100644 index 00000000000..29625232e95 --- /dev/null +++ b/arch/arm/mach-keystone/pm_domain.c @@ -0,0 +1,82 @@ +/* + * PM domain driver for Keystone2 devices + * + * Copyright 2013 Texas Instruments, Inc. + * Santosh Shilimkar <santosh.shillimkar@ti.com> + * + * Based on Kevins work on DAVINCI SOCs + * Kevin Hilman <khilman@linaro.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/pm_runtime.h> +#include <linux/pm_clock.h> +#include <linux/platform_device.h> +#include <linux/clk-provider.h> +#include <linux/of.h> + +#ifdef CONFIG_PM_RUNTIME +static int keystone_pm_runtime_suspend(struct device *dev) +{ + int ret; + + dev_dbg(dev, "%s\n", __func__); + + ret = pm_generic_runtime_suspend(dev); + if (ret) + return ret; + + ret = pm_clk_suspend(dev); + if (ret) { + pm_generic_runtime_resume(dev); + return ret; + } + + return 0; +} + +static int keystone_pm_runtime_resume(struct device *dev) +{ + dev_dbg(dev, "%s\n", __func__); + + pm_clk_resume(dev); + + return pm_generic_runtime_resume(dev); +} +#endif + +static struct dev_pm_domain keystone_pm_domain = { + .ops = { + SET_RUNTIME_PM_OPS(keystone_pm_runtime_suspend, + keystone_pm_runtime_resume, NULL) + USE_PLATFORM_PM_SLEEP_OPS + }, +}; + +static struct pm_clk_notifier_block platform_domain_notifier = { + .pm_domain = &keystone_pm_domain, +}; + +static struct of_device_id of_keystone_table[] = { + {.compatible = "ti,keystone"}, + { /* end of list */ }, +}; + +int __init keystone_pm_runtime_init(void) +{ + struct device_node *np; + + np = of_find_matching_node(NULL, of_keystone_table); + if (!np) + return 0; + + of_clk_init(NULL); + pm_clk_add_notifier(&platform_bus_type, &platform_domain_notifier); + + return 0; +} +subsys_initcall(keystone_pm_runtime_init); diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile index d1f8e3d0793..144b5110293 100644 --- a/arch/arm/mach-kirkwood/Makefile +++ b/arch/arm/mach-kirkwood/Makefile @@ -1,5 +1,7 @@ obj-y += common.o pcie.o obj-$(CONFIG_KIRKWOOD_LEGACY) += irq.o mpp.o +obj-$(CONFIG_PM) += pm.o + obj-$(CONFIG_MACH_D2NET_V2) += d2net_v2-setup.o lacie_v2-common.o obj-$(CONFIG_MACH_NET2BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o obj-$(CONFIG_MACH_NET5BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index 82d3ad8e87c..9caa4fe9591 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -13,9 +13,10 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_net.h> #include <linux/of_platform.h> #include <linux/clk-provider.h> -#include <linux/clocksource.h> #include <linux/dma-mapping.h> #include <linux/irqchip.h> #include <linux/kexec.h> @@ -44,14 +45,6 @@ static void __init kirkwood_legacy_clk_init(void) clkspec.np = np; clkspec.args_count = 1; - clkspec.args[0] = CGC_BIT_PEX0; - orion_clkdev_add("0", "pcie", - of_clk_get_from_provider(&clkspec)); - - clkspec.args[0] = CGC_BIT_PEX1; - orion_clkdev_add("1", "pcie", - of_clk_get_from_provider(&clkspec)); - /* * The ethernet interfaces forget the MAC address assigned by * u-boot if the clocks are turned off. Until proper DT support @@ -66,17 +59,83 @@ static void __init kirkwood_legacy_clk_init(void) clk_prepare_enable(clk); } -static void __init kirkwood_dt_time_init(void) -{ - of_clk_init(NULL); - clocksource_of_init(); -} +#define MV643XX_ETH_MAC_ADDR_LOW 0x0414 +#define MV643XX_ETH_MAC_ADDR_HIGH 0x0418 -static void __init kirkwood_dt_init_early(void) +static void __init kirkwood_dt_eth_fixup(void) { - mvebu_mbus_init("marvell,kirkwood-mbus", - BRIDGE_WINS_BASE, BRIDGE_WINS_SZ, - DDR_WINDOW_CPU_BASE, DDR_WINDOW_CPU_SZ); + struct device_node *np; + + /* + * The ethernet interfaces forget the MAC address assigned by u-boot + * if the clocks are turned off. Usually, u-boot on kirkwood boards + * has no DT support to properly set local-mac-address property. + * As a workaround, we get the MAC address from mv643xx_eth registers + * and update the port device node if no valid MAC address is set. + */ + for_each_compatible_node(np, NULL, "marvell,kirkwood-eth-port") { + struct device_node *pnp = of_get_parent(np); + struct clk *clk; + struct property *pmac; + void __iomem *io; + u8 *macaddr; + u32 reg; + + if (!pnp) + continue; + + /* skip disabled nodes or nodes with valid MAC address*/ + if (!of_device_is_available(pnp) || of_get_mac_address(np)) + goto eth_fixup_skip; + + clk = of_clk_get(pnp, 0); + if (IS_ERR(clk)) + goto eth_fixup_skip; + + io = of_iomap(pnp, 0); + if (!io) + goto eth_fixup_no_map; + + /* ensure port clock is not gated to not hang CPU */ + clk_prepare_enable(clk); + + /* store MAC address register contents in local-mac-address */ + pr_err(FW_INFO "%s: local-mac-address is not set\n", + np->full_name); + + pmac = kzalloc(sizeof(*pmac) + 6, GFP_KERNEL); + if (!pmac) + goto eth_fixup_no_mem; + + pmac->value = pmac + 1; + pmac->length = 6; + pmac->name = kstrdup("local-mac-address", GFP_KERNEL); + if (!pmac->name) { + kfree(pmac); + goto eth_fixup_no_mem; + } + + macaddr = pmac->value; + reg = readl(io + MV643XX_ETH_MAC_ADDR_HIGH); + macaddr[0] = (reg >> 24) & 0xff; + macaddr[1] = (reg >> 16) & 0xff; + macaddr[2] = (reg >> 8) & 0xff; + macaddr[3] = reg & 0xff; + + reg = readl(io + MV643XX_ETH_MAC_ADDR_LOW); + macaddr[4] = (reg >> 8) & 0xff; + macaddr[5] = reg & 0xff; + + of_update_property(np, pmac); + +eth_fixup_no_mem: + iounmap(io); + clk_disable_unprepare(clk); +eth_fixup_no_map: + clk_put(clk); +eth_fixup_skip: + of_node_put(pnp); + } } static void __init kirkwood_dt_init(void) @@ -92,16 +151,16 @@ static void __init kirkwood_dt_init(void) writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG); BUG_ON(mvebu_mbus_dt_init()); - kirkwood_setup_wins(); kirkwood_l2_init(); kirkwood_cpufreq_init(); - + kirkwood_cpuidle_init(); /* Setup clocks for legacy devices */ kirkwood_legacy_clk_init(); - kirkwood_cpuidle_init(); + kirkwood_pm_init(); + kirkwood_dt_eth_fixup(); #ifdef CONFIG_KEXEC kexec_reinit = kirkwood_enable_pcie; @@ -121,8 +180,6 @@ static const char * const kirkwood_dt_board_compat[] = { DT_MACHINE_START(KIRKWOOD_DT, "Marvell Kirkwood (Flattened Device Tree)") /* Maintainer: Jason Cooper <jason@lakedaemon.net> */ .map_io = kirkwood_map_io, - .init_early = kirkwood_dt_init_early, - .init_time = kirkwood_dt_time_init, .init_machine = kirkwood_dt_init, .restart = kirkwood_restart, .dt_compat = kirkwood_dt_board_compat, diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index 176761134a6..f3407a5db21 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -721,6 +721,7 @@ void __init kirkwood_init(void) kirkwood_xor1_init(); kirkwood_crypto_init(); + kirkwood_pm_init(); kirkwood_cpuidle_init(); #ifdef CONFIG_KEXEC kexec_reinit = kirkwood_enable_pcie; diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h index 1296de94feb..05fd648df54 100644 --- a/arch/arm/mach-kirkwood/common.h +++ b/arch/arm/mach-kirkwood/common.h @@ -58,6 +58,12 @@ void kirkwood_cpufreq_init(void); void kirkwood_restart(enum reboot_mode, const char *); void kirkwood_clk_init(void); +#ifdef CONFIG_PM +void kirkwood_pm_init(void); +#else +static inline void kirkwood_pm_init(void) {}; +#endif + /* board init functions for boards not fully converted to fdt */ #ifdef CONFIG_MACH_MV88F6281GTW_GE_DT void mv88f6281gtw_ge_init(void); diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h index 91242c944d7..8b9d1c9ff19 100644 --- a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h +++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h @@ -78,4 +78,6 @@ #define CGC_TDM (1 << 20) #define CGC_RESERVED (0x6 << 21) +#define MEMORY_PM_CTRL (BRIDGE_VIRT_BASE + 0x118) + #endif diff --git a/arch/arm/mach-kirkwood/pm.c b/arch/arm/mach-kirkwood/pm.c new file mode 100644 index 00000000000..8783a7184e7 --- /dev/null +++ b/arch/arm/mach-kirkwood/pm.c @@ -0,0 +1,73 @@ +/* + * Power Management driver for Marvell Kirkwood SoCs + * + * Copyright (C) 2013 Ezequiel Garcia <ezequiel@free-electrons.com> + * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, + * version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/suspend.h> +#include <linux/io.h> +#include <mach/bridge-regs.h> + +static void __iomem *ddr_operation_base; + +static void kirkwood_low_power(void) +{ + u32 mem_pm_ctrl; + + mem_pm_ctrl = readl(MEMORY_PM_CTRL); + + /* Set peripherals to low-power mode */ + writel_relaxed(~0, MEMORY_PM_CTRL); + + /* Set DDR in self-refresh */ + writel_relaxed(0x7, ddr_operation_base); + + /* + * Set CPU in wait-for-interrupt state. + * This disables the CPU core clocks, + * the array clocks, and also the L2 controller. + */ + cpu_do_idle(); + + writel_relaxed(mem_pm_ctrl, MEMORY_PM_CTRL); +} + +static int kirkwood_suspend_enter(suspend_state_t state) +{ + switch (state) { + case PM_SUSPEND_STANDBY: + kirkwood_low_power(); + break; + default: + return -EINVAL; + } + return 0; +} + +static int kirkwood_pm_valid_standby(suspend_state_t state) +{ + return state == PM_SUSPEND_STANDBY; +} + +static const struct platform_suspend_ops kirkwood_suspend_ops = { + .enter = kirkwood_suspend_enter, + .valid = kirkwood_pm_valid_standby, +}; + +int __init kirkwood_pm_init(void) +{ + ddr_operation_base = ioremap(DDR_OPERATION_BASE, 4); + suspend_set_ops(&kirkwood_suspend_ops); + return 0; +} diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig index 905efc8cac7..2586c286587 100644 --- a/arch/arm/mach-msm/Kconfig +++ b/arch/arm/mach-msm/Kconfig @@ -1,12 +1,12 @@ if ARCH_MSM comment "Qualcomm MSM SoC Type" - depends on (ARCH_MSM8X60 || ARCH_MSM8960) + depends on ARCH_MSM_DT choice prompt "Qualcomm MSM SoC Type" default ARCH_MSM7X00A - depends on !(ARCH_MSM8X60 || ARCH_MSM8960) + depends on !ARCH_MSM_DT config ARCH_MSM7X00A bool "MSM7x00A / MSM7x01A" @@ -49,7 +49,6 @@ config ARCH_MSM8X60 select GPIO_MSM_V2 select HAVE_SMP select MSM_SCM if SMP - select USE_OF config ARCH_MSM8960 bool "MSM8960" @@ -58,6 +57,11 @@ config ARCH_MSM8960 select HAVE_SMP select GPIO_MSM_V2 select MSM_SCM if SMP + +config ARCH_MSM_DT + def_bool y + depends on (ARCH_MSM8X60 || ARCH_MSM8960) + select SPARSE_IRQ select USE_OF config MSM_HAS_DEBUG_UART_HS @@ -68,6 +72,7 @@ config MSM_SOC_REV_A config ARCH_MSM_ARM11 bool + config ARCH_MSM_SCORPION bool @@ -75,6 +80,7 @@ config MSM_VIC bool menu "Qualcomm MSM Board Type" + depends on !ARCH_MSM_DT config MACH_HALIBUT depends on ARCH_MSM @@ -122,6 +128,7 @@ config MSM_SMD config MSM_GPIOMUX bool + depends on !ARCH_MSM_DT help Support for MSM V1 TLMM GPIOMUX architecture. diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile index d872634c2f8..7ed4c1b2bdd 100644 --- a/arch/arm/mach-msm/Makefile +++ b/arch/arm/mach-msm/Makefile @@ -26,7 +26,6 @@ obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o b obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o devices-msm7x00.o obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o obj-$(CONFIG_ARCH_QSD8X50) += board-qsd8x50.o devices-qsd8x50.o -obj-$(CONFIG_ARCH_MSM8X60) += board-dt-8660.o -obj-$(CONFIG_ARCH_MSM8960) += board-dt-8960.o +obj-$(CONFIG_ARCH_MSM_DT) += board-dt.o obj-$(CONFIG_MSM_GPIOMUX) += gpiomux.o obj-$(CONFIG_ARCH_QSD8X50) += gpiomux-8x50.o diff --git a/arch/arm/mach-msm/board-dt-8660.c b/arch/arm/mach-msm/board-dt-8660.c deleted file mode 100644 index c2946892f5e..00000000000 --- a/arch/arm/mach-msm/board-dt-8660.c +++ /dev/null @@ -1,48 +0,0 @@ -/* Copyright (c) 2010-2012, The Linux Foundation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/init.h> -#include <linux/of.h> -#include <linux/of_platform.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include "common.h" - -static void __init msm8x60_init_late(void) -{ - smd_debugfs_init(); -} - -static struct of_dev_auxdata msm_auxdata_lookup[] __initdata = { - {} -}; - -static void __init msm8x60_dt_init(void) -{ - of_platform_populate(NULL, of_default_bus_match_table, - msm_auxdata_lookup, NULL); -} - -static const char *msm8x60_fluid_match[] __initdata = { - "qcom,msm8660-fluid", - "qcom,msm8660-surf", - NULL -}; - -DT_MACHINE_START(MSM_DT, "Qualcomm MSM (Flattened Device Tree)") - .smp = smp_ops(msm_smp_ops), - .init_machine = msm8x60_dt_init, - .init_late = msm8x60_init_late, - .dt_compat = msm8x60_fluid_match, -MACHINE_END diff --git a/arch/arm/mach-msm/board-dt-8960.c b/arch/arm/mach-msm/board-dt.c index d4ca52c4511..16e6183ac9f 100644 --- a/arch/arm/mach-msm/board-dt-8960.c +++ b/arch/arm/mach-msm/board-dt.c @@ -1,4 +1,4 @@ -/* Copyright (c) 2012, The Linux Foundation. All rights reserved. +/* Copyright (c) 2010-2012,2013 The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and @@ -11,6 +11,7 @@ */ #include <linux/init.h> +#include <linux/of.h> #include <linux/of_platform.h> #include <asm/mach/arch.h> @@ -18,18 +19,14 @@ #include "common.h" -static void __init msm_dt_init(void) -{ - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); -} - -static const char * const msm8960_dt_match[] __initconst = { +static const char * const msm_dt_match[] __initconst = { + "qcom,msm8660-fluid", + "qcom,msm8660-surf", "qcom,msm8960-cdp", NULL }; -DT_MACHINE_START(MSM8960_DT, "Qualcomm MSM (Flattened Device Tree)") +DT_MACHINE_START(MSM_DT, "Qualcomm MSM (Flattened Device Tree)") .smp = smp_ops(msm_smp_ops), - .init_machine = msm_dt_init, - .dt_compat = msm8960_dt_match, + .dt_compat = msm_dt_match, MACHINE_END diff --git a/arch/arm/mach-msm/include/mach/irqs-8960.h b/arch/arm/mach-msm/include/mach/irqs-8960.h deleted file mode 100644 index 81ab2a6792b..00000000000 --- a/arch/arm/mach-msm/include/mach/irqs-8960.h +++ /dev/null @@ -1,277 +0,0 @@ -/* Copyright (c) 2011 Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __ASM_ARCH_MSM_IRQS_8960_H -#define __ASM_ARCH_MSM_IRQS_8960_H - -/* MSM ACPU Interrupt Numbers */ - -/* 0-15: STI/SGI (software triggered/generated interrupts) - 16-31: PPI (private peripheral interrupts) - 32+: SPI (shared peripheral interrupts) */ - -#define GIC_PPI_START 16 -#define GIC_SPI_START 32 - -#define INT_VGIC (GIC_PPI_START + 0) -#define INT_DEBUG_TIMER_EXP (GIC_PPI_START + 1) -#define INT_GP_TIMER_EXP (GIC_PPI_START + 2) -#define INT_GP_TIMER2_EXP (GIC_PPI_START + 3) -#define WDT0_ACCSCSSNBARK_INT (GIC_PPI_START + 4) -#define WDT1_ACCSCSSNBARK_INT (GIC_PPI_START + 5) -#define AVS_SVICINT (GIC_PPI_START + 6) -#define AVS_SVICINTSWDONE (GIC_PPI_START + 7) -#define CPU_DBGCPUXCOMMRXFULL (GIC_PPI_START + 8) -#define CPU_DBGCPUXCOMMTXEMPTY (GIC_PPI_START + 9) -#define CPU_SICCPUXPERFMONIRPTREQ (GIC_PPI_START + 10) -#define SC_AVSCPUXDOWN (GIC_PPI_START + 11) -#define SC_AVSCPUXUP (GIC_PPI_START + 12) -#define SC_SICCPUXACGIRPTREQ (GIC_PPI_START + 13) -#define SC_SICCPUXEXTFAULTIRPTREQ (GIC_PPI_START + 14) -/* PPI 15 is unused */ - -#define SC_SICMPUIRPTREQ (GIC_SPI_START + 0) -#define SC_SICL2IRPTREQ (GIC_SPI_START + 1) -#define SC_SICL2PERFMONIRPTREQ (GIC_SPI_START + 2) -#define SC_SICAGCIRPTREQ (GIC_SPI_START + 3) -#define TLMM_APCC_DIR_CONN_IRQ_0 (GIC_SPI_START + 4) -#define TLMM_APCC_DIR_CONN_IRQ_1 (GIC_SPI_START + 5) -#define TLMM_APCC_DIR_CONN_IRQ_2 (GIC_SPI_START + 6) -#define TLMM_APCC_DIR_CONN_IRQ_3 (GIC_SPI_START + 7) -#define TLMM_APCC_DIR_CONN_IRQ_4 (GIC_SPI_START + 8) -#define TLMM_APCC_DIR_CONN_IRQ_5 (GIC_SPI_START + 9) -#define TLMM_APCC_DIR_CONN_IRQ_6 (GIC_SPI_START + 10) -#define TLMM_APCC_DIR_CONN_IRQ_7 (GIC_SPI_START + 11) -#define TLMM_APCC_DIR_CONN_IRQ_8 (GIC_SPI_START + 12) -#define TLMM_APCC_DIR_CONN_IRQ_9 (GIC_SPI_START + 13) -#define PM8921_SEC_IRQ_103 (GIC_SPI_START + 14) -#define PM8018_SEC_IRQ_106 (GIC_SPI_START + 15) -#define TLMM_APCC_SUMMARY_IRQ (GIC_SPI_START + 16) -#define SPDM_RT_1_IRQ (GIC_SPI_START + 17) -#define SPDM_DIAG_IRQ (GIC_SPI_START + 18) -#define RPM_APCC_CPU0_GP_HIGH_IRQ (GIC_SPI_START + 19) -#define RPM_APCC_CPU0_GP_MEDIUM_IRQ (GIC_SPI_START + 20) -#define RPM_APCC_CPU0_GP_LOW_IRQ (GIC_SPI_START + 21) -#define RPM_APCC_CPU0_WAKE_UP_IRQ (GIC_SPI_START + 22) -#define RPM_APCC_CPU1_GP_HIGH_IRQ (GIC_SPI_START + 23) -#define RPM_APCC_CPU1_GP_MEDIUM_IRQ (GIC_SPI_START + 24) -#define RPM_APCC_CPU1_GP_LOW_IRQ (GIC_SPI_START + 25) -#define RPM_APCC_CPU1_WAKE_UP_IRQ (GIC_SPI_START + 26) -#define SSBI2_2_SC_CPU0_SECURE_IRQ (GIC_SPI_START + 27) -#define SSBI2_2_SC_CPU0_NON_SECURE_IRQ (GIC_SPI_START + 28) -#define SSBI2_1_SC_CPU0_SECURE_IRQ (GIC_SPI_START + 29) -#define SSBI2_1_SC_CPU0_NON_SECURE_IRQ (GIC_SPI_START + 30) -#define MSMC_SC_SEC_CE_IRQ (GIC_SPI_START + 31) -#define MSMC_SC_PRI_CE_IRQ (GIC_SPI_START + 32) -#define SLIMBUS0_CORE_EE1_IRQ (GIC_SPI_START + 33) -#define SLIMBUS0_BAM_EE1_IRQ (GIC_SPI_START + 34) -#define Q6FW_WDOG_EXPIRED_IRQ (GIC_SPI_START + 35) -#define Q6SW_WDOG_EXPIRED_IRQ (GIC_SPI_START + 36) -#define MSS_TO_APPS_IRQ_0 (GIC_SPI_START + 37) -#define MSS_TO_APPS_IRQ_1 (GIC_SPI_START + 38) -#define MSS_TO_APPS_IRQ_2 (GIC_SPI_START + 39) -#define MSS_TO_APPS_IRQ_3 (GIC_SPI_START + 40) -#define MSS_TO_APPS_IRQ_4 (GIC_SPI_START + 41) -#define MSS_TO_APPS_IRQ_5 (GIC_SPI_START + 42) -#define MSS_TO_APPS_IRQ_6 (GIC_SPI_START + 43) -#define MSS_TO_APPS_IRQ_7 (GIC_SPI_START + 44) -#define MSS_TO_APPS_IRQ_8 (GIC_SPI_START + 45) -#define MSS_TO_APPS_IRQ_9 (GIC_SPI_START + 46) -#define VPE_IRQ (GIC_SPI_START + 47) -#define VFE_IRQ (GIC_SPI_START + 48) -#define VCODEC_IRQ (GIC_SPI_START + 49) -#define TV_ENC_IRQ (GIC_SPI_START + 50) -#define SMMU_VPE_CB_SC_SECURE_IRQ (GIC_SPI_START + 51) -#define SMMU_VPE_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 52) -#define SMMU_VFE_CB_SC_SECURE_IRQ (GIC_SPI_START + 53) -#define SMMU_VFE_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 54) -#define SMMU_VCODEC_B_CB_SC_SECURE_IRQ (GIC_SPI_START + 55) -#define SMMU_VCODEC_B_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 56) -#define SMMU_VCODEC_A_CB_SC_SECURE_IRQ (GIC_SPI_START + 57) -#define SMMU_VCODEC_A_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 58) -#define SMMU_ROT_CB_SC_SECURE_IRQ (GIC_SPI_START + 59) -#define SMMU_ROT_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 60) -#define SMMU_MDP1_CB_SC_SECURE_IRQ (GIC_SPI_START + 61) -#define SMMU_MDP1_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 62) -#define SMMU_MDP0_CB_SC_SECURE_IRQ (GIC_SPI_START + 63) -#define SMMU_MDP0_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 64) -#define SMMU_JPEGD_CB_SC_SECURE_IRQ (GIC_SPI_START + 65) -#define SMMU_JPEGD_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 66) -#define SMMU_IJPEG_CB_SC_SECURE_IRQ (GIC_SPI_START + 67) -#define SMMU_IJPEG_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 68) -#define SMMU_GFX3D_CB_SC_SECURE_IRQ (GIC_SPI_START + 69) -#define SMMU_GFX3D_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 70) -#define SMMU_GFX2D0_CB_SC_SECURE_IRQ (GIC_SPI_START + 71) -#define SMMU_GFX2D0_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 72) -#define ROT_IRQ (GIC_SPI_START + 73) -#define MMSS_FABRIC_IRQ (GIC_SPI_START + 74) -#define MDP_IRQ (GIC_SPI_START + 75) -#define JPEGD_IRQ (GIC_SPI_START + 76) -#define JPEG_IRQ (GIC_SPI_START + 77) -#define MMSS_IMEM_IRQ (GIC_SPI_START + 78) -#define HDMI_IRQ (GIC_SPI_START + 79) -#define GFX3D_IRQ (GIC_SPI_START + 80) -#define GFX2D0_IRQ (GIC_SPI_START + 81) -#define DSI1_IRQ (GIC_SPI_START + 82) -#define CSI_1_IRQ (GIC_SPI_START + 83) -#define CSI_0_IRQ (GIC_SPI_START + 84) -#define LPASS_SCSS_AUDIO_IF_OUT0_IRQ (GIC_SPI_START + 85) -#define LPASS_SCSS_MIDI_IRQ (GIC_SPI_START + 86) -#define LPASS_Q6SS_WDOG_EXPIRED (GIC_SPI_START + 87) -#define LPASS_SCSS_GP_LOW_IRQ (GIC_SPI_START + 88) -#define LPASS_SCSS_GP_MEDIUM_IRQ (GIC_SPI_START + 89) -#define LPASS_SCSS_GP_HIGH_IRQ (GIC_SPI_START + 90) -#define TOP_IMEM_IRQ (GIC_SPI_START + 91) -#define FABRIC_SYS_IRQ (GIC_SPI_START + 92) -#define FABRIC_APPS_IRQ (GIC_SPI_START + 93) -#define USB1_HS_BAM_IRQ (GIC_SPI_START + 94) -#define SDC4_BAM_IRQ (GIC_SPI_START + 95) -#define SDC3_BAM_IRQ (GIC_SPI_START + 96) -#define SDC2_BAM_IRQ (GIC_SPI_START + 97) -#define SDC1_BAM_IRQ (GIC_SPI_START + 98) -#define FABRIC_SPS_IRQ (GIC_SPI_START + 99) -#define USB1_HS_IRQ (GIC_SPI_START + 100) -#define SDC4_IRQ_0 (GIC_SPI_START + 101) -#define SDC3_IRQ_0 (GIC_SPI_START + 102) -#define SDC2_IRQ_0 (GIC_SPI_START + 103) -#define SDC1_IRQ_0 (GIC_SPI_START + 104) -#define SPS_BAM_DMA_IRQ (GIC_SPI_START + 105) -#define SPS_SEC_VIOL_IRQ (GIC_SPI_START + 106) -#define SPS_MTI_0 (GIC_SPI_START + 107) -#define SPS_MTI_1 (GIC_SPI_START + 108) -#define SPS_MTI_2 (GIC_SPI_START + 109) -#define SPS_MTI_3 (GIC_SPI_START + 110) -#define SPS_MTI_4 (GIC_SPI_START + 111) -#define SPS_MTI_5 (GIC_SPI_START + 112) -#define SPS_MTI_6 (GIC_SPI_START + 113) -#define SPS_MTI_7 (GIC_SPI_START + 114) -#define SPS_MTI_8 (GIC_SPI_START + 115) -#define SPS_MTI_9 (GIC_SPI_START + 116) -#define SPS_MTI_10 (GIC_SPI_START + 117) -#define SPS_MTI_11 (GIC_SPI_START + 118) -#define SPS_MTI_12 (GIC_SPI_START + 119) -#define SPS_MTI_13 (GIC_SPI_START + 120) -#define SPS_MTI_14 (GIC_SPI_START + 121) -#define SPS_MTI_15 (GIC_SPI_START + 122) -#define SPS_MTI_16 (GIC_SPI_START + 123) -#define SPS_MTI_17 (GIC_SPI_START + 124) -#define SPS_MTI_18 (GIC_SPI_START + 125) -#define SPS_MTI_19 (GIC_SPI_START + 126) -#define SPS_MTI_20 (GIC_SPI_START + 127) -#define SPS_MTI_21 (GIC_SPI_START + 128) -#define SPS_MTI_22 (GIC_SPI_START + 129) -#define SPS_MTI_23 (GIC_SPI_START + 130) -#define SPS_MTI_24 (GIC_SPI_START + 131) -#define SPS_MTI_25 (GIC_SPI_START + 132) -#define SPS_MTI_26 (GIC_SPI_START + 133) -#define SPS_MTI_27 (GIC_SPI_START + 134) -#define SPS_MTI_28 (GIC_SPI_START + 135) -#define SPS_MTI_29 (GIC_SPI_START + 136) -#define SPS_MTI_30 (GIC_SPI_START + 137) -#define SPS_MTI_31 (GIC_SPI_START + 138) -#define CSIPHY_4LN_IRQ (GIC_SPI_START + 139) -#define CSIPHY_2LN_IRQ (GIC_SPI_START + 140) -#define USB2_IRQ (GIC_SPI_START + 141) -#define USB1_IRQ (GIC_SPI_START + 142) -#define TSSC_SSBI_IRQ (GIC_SPI_START + 143) -#define TSSC_SAMPLE_IRQ (GIC_SPI_START + 144) -#define TSSC_PENUP_IRQ (GIC_SPI_START + 145) -#define GSBI1_UARTDM_IRQ (GIC_SPI_START + 146) -#define GSBI1_QUP_IRQ (GIC_SPI_START + 147) -#define GSBI2_UARTDM_IRQ (GIC_SPI_START + 148) -#define GSBI2_QUP_IRQ (GIC_SPI_START + 149) -#define GSBI3_UARTDM_IRQ (GIC_SPI_START + 150) -#define GSBI3_QUP_IRQ (GIC_SPI_START + 151) -#define GSBI4_UARTDM_IRQ (GIC_SPI_START + 152) -#define GSBI4_QUP_IRQ (GIC_SPI_START + 153) -#define GSBI5_UARTDM_IRQ (GIC_SPI_START + 154) -#define GSBI5_QUP_IRQ (GIC_SPI_START + 155) -#define GSBI6_UARTDM_IRQ (GIC_SPI_START + 156) -#define GSBI6_QUP_IRQ (GIC_SPI_START + 157) -#define GSBI7_UARTDM_IRQ (GIC_SPI_START + 158) -#define GSBI7_QUP_IRQ (GIC_SPI_START + 159) -#define GSBI8_UARTDM_IRQ (GIC_SPI_START + 160) -#define GSBI8_QUP_IRQ (GIC_SPI_START + 161) -#define TSIF_TSPP_IRQ (GIC_SPI_START + 162) -#define TSIF_BAM_IRQ (GIC_SPI_START + 163) -#define TSIF2_IRQ (GIC_SPI_START + 164) -#define TSIF1_IRQ (GIC_SPI_START + 165) -#define DSI2_IRQ (GIC_SPI_START + 166) -#define ISPIF_IRQ (GIC_SPI_START + 167) -#define MSMC_SC_SEC_TMR_IRQ (GIC_SPI_START + 168) -#define MSMC_SC_SEC_WDOG_BARK_IRQ (GIC_SPI_START + 169) -#define INT_ADM0_SCSS_0_IRQ (GIC_SPI_START + 170) -#define INT_ADM0_SCSS_1_IRQ (GIC_SPI_START + 171) -#define INT_ADM0_SCSS_2_IRQ (GIC_SPI_START + 172) -#define INT_ADM0_SCSS_3_IRQ (GIC_SPI_START + 173) -#define CC_SCSS_WDT1CPU1BITEEXPIRED (GIC_SPI_START + 174) -#define CC_SCSS_WDT1CPU0BITEEXPIRED (GIC_SPI_START + 175) -#define CC_SCSS_WDT0CPU1BITEEXPIRED (GIC_SPI_START + 176) -#define CC_SCSS_WDT0CPU0BITEEXPIRED (GIC_SPI_START + 177) -#define TSENS_UPPER_LOWER_INT (GIC_SPI_START + 178) -#define SSBI2_2_SC_CPU1_SECURE_INT (GIC_SPI_START + 179) -#define SSBI2_2_SC_CPU1_NON_SECURE_INT (GIC_SPI_START + 180) -#define SSBI2_1_SC_CPU1_SECURE_INT (GIC_SPI_START + 181) -#define SSBI2_1_SC_CPU1_NON_SECURE_INT (GIC_SPI_START + 182) -#define XPU_SUMMARY_IRQ (GIC_SPI_START + 183) -#define BUS_EXCEPTION_SUMMARY_IRQ (GIC_SPI_START + 184) -#define HSDDRX_EBI1CH0_IRQ (GIC_SPI_START + 185) -#define HSDDRX_EBI1CH1_IRQ (GIC_SPI_START + 186) -#define SDC5_BAM_IRQ (GIC_SPI_START + 187) -#define SDC5_IRQ_0 (GIC_SPI_START + 188) -#define GSBI9_UARTDM_IRQ (GIC_SPI_START + 189) -#define GSBI9_QUP_IRQ (GIC_SPI_START + 190) -#define GSBI10_UARTDM_IRQ (GIC_SPI_START + 191) -#define GSBI10_QUP_IRQ (GIC_SPI_START + 192) -#define GSBI11_UARTDM_IRQ (GIC_SPI_START + 193) -#define GSBI11_QUP_IRQ (GIC_SPI_START + 194) -#define GSBI12_UARTDM_IRQ (GIC_SPI_START + 195) -#define GSBI12_QUP_IRQ (GIC_SPI_START + 196) -#define RIVA_APSS_LTECOEX_IRQ (GIC_SPI_START + 197) -#define RIVA_APSS_SPARE_IRQ (GIC_SPI_START + 198) -#define RIVA_APSS_WDOG_BITE_RESET_RDY_IRQ (GIC_SPI_START + 199) -#define RIVA_ASS_RESET_DONE_IRQ (GIC_SPI_START + 200) -#define RIVA_APSS_ASIC_IRQ (GIC_SPI_START + 201) -#define RIVA_APPS_WLAN_RX_DATA_AVAIL_IRQ (GIC_SPI_START + 202) -#define RIVA_APPS_WLAN_DATA_XFER_DONE_IRQ (GIC_SPI_START + 203) -#define RIVA_APPS_WLAM_SMSM_IRQ (GIC_SPI_START + 204) -#define RIVA_APPS_LOG_CTRL_IRQ (GIC_SPI_START + 205) -#define RIVA_APPS_FM_CTRL_IRQ (GIC_SPI_START + 206) -#define RIVA_APPS_HCI_IRQ (GIC_SPI_START + 207) -#define RIVA_APPS_WLAN_CTRL_IRQ (GIC_SPI_START + 208) -#define A2_BAM_IRQ (GIC_SPI_START + 209) -#define SMMU_GFX2D1_CB_SC_SECURE_IRQ (GIC_SPI_START + 210) -#define SMMU_GFX2D1_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 211) -#define GFX2D1_IRQ (GIC_SPI_START + 212) -#define PPSS_WDOG_TIMER_IRQ (GIC_SPI_START + 213) -#define SPS_SLIMBUS_CORE_EE0_IRQ (GIC_SPI_START + 214) -#define SPS_SLIMBUS_BAM_EE0_IRQ (GIC_SPI_START + 215) -#define QDSS_ETB_IRQ (GIC_SPI_START + 216) -#define QDSS_CTI2KPSS_CPU1_IRQ (GIC_SPI_START + 217) -#define QDSS_CTI2KPSS_CPU0_IRQ (GIC_SPI_START + 218) -#define TLMM_APCC_DIR_CONN_IRQ_16 (GIC_SPI_START + 219) -#define TLMM_APCC_DIR_CONN_IRQ_17 (GIC_SPI_START + 220) -#define TLMM_APCC_DIR_CONN_IRQ_18 (GIC_SPI_START + 221) -#define TLMM_APCC_DIR_CONN_IRQ_19 (GIC_SPI_START + 222) -#define TLMM_APCC_DIR_CONN_IRQ_20 (GIC_SPI_START + 223) -#define TLMM_APCC_DIR_CONN_IRQ_21 (GIC_SPI_START + 224) -#define PM8921_SEC_IRQ_104 (GIC_SPI_START + 225) -#define PM8018_SEC_IRQ_107 (GIC_SPI_START + 226) - -/* For now, use the maximum number of interrupts until a pending GIC issue - * is sorted out */ -#define NR_MSM_IRQS 1020 -#define NR_BOARD_IRQS 0 -#define NR_GPIO_IRQS 0 - -#endif - diff --git a/arch/arm/mach-msm/include/mach/irqs-8x60.h b/arch/arm/mach-msm/include/mach/irqs-8x60.h deleted file mode 100644 index f65841c74c0..00000000000 --- a/arch/arm/mach-msm/include/mach/irqs-8x60.h +++ /dev/null @@ -1,258 +0,0 @@ -/* Copyright (c) 2010 Code Aurora Forum. All rights reserved. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __ASM_ARCH_MSM_IRQS_8X60_H -#define __ASM_ARCH_MSM_IRQS_8X60_H - -/* MSM ACPU Interrupt Numbers */ - -/* 0-15: STI/SGI (software triggered/generated interrupts) - * 16-31: PPI (private peripheral interrupts) - * 32+: SPI (shared peripheral interrupts) - */ - -#define GIC_PPI_START 16 -#define GIC_SPI_START 32 - -#define INT_DEBUG_TIMER_EXP (GIC_PPI_START + 0) -#define INT_GP_TIMER_EXP (GIC_PPI_START + 1) -#define INT_GP_TIMER2_EXP (GIC_PPI_START + 2) -#define WDT0_ACCSCSSNBARK_INT (GIC_PPI_START + 3) -#define WDT1_ACCSCSSNBARK_INT (GIC_PPI_START + 4) -#define AVS_SVICINT (GIC_PPI_START + 5) -#define AVS_SVICINTSWDONE (GIC_PPI_START + 6) -#define CPU_DBGCPUXCOMMRXFULL (GIC_PPI_START + 7) -#define CPU_DBGCPUXCOMMTXEMPTY (GIC_PPI_START + 8) -#define CPU_SICCPUXPERFMONIRPTREQ (GIC_PPI_START + 9) -#define SC_AVSCPUXDOWN (GIC_PPI_START + 10) -#define SC_AVSCPUXUP (GIC_PPI_START + 11) -#define SC_SICCPUXACGIRPTREQ (GIC_PPI_START + 12) -/* PPI 13 to 15 are unused */ - - -#define SC_SICMPUIRPTREQ (GIC_SPI_START + 0) -#define SC_SICL2IRPTREQ (GIC_SPI_START + 1) -#define SC_SICL2ACGIRPTREQ (GIC_SPI_START + 2) -#define NC (GIC_SPI_START + 3) -#define TLMM_SCSS_DIR_CONN_IRQ_0 (GIC_SPI_START + 4) -#define TLMM_SCSS_DIR_CONN_IRQ_1 (GIC_SPI_START + 5) -#define TLMM_SCSS_DIR_CONN_IRQ_2 (GIC_SPI_START + 6) -#define TLMM_SCSS_DIR_CONN_IRQ_3 (GIC_SPI_START + 7) -#define TLMM_SCSS_DIR_CONN_IRQ_4 (GIC_SPI_START + 8) -#define TLMM_SCSS_DIR_CONN_IRQ_5 (GIC_SPI_START + 9) -#define TLMM_SCSS_DIR_CONN_IRQ_6 (GIC_SPI_START + 10) -#define TLMM_SCSS_DIR_CONN_IRQ_7 (GIC_SPI_START + 11) -#define TLMM_SCSS_DIR_CONN_IRQ_8 (GIC_SPI_START + 12) -#define TLMM_SCSS_DIR_CONN_IRQ_9 (GIC_SPI_START + 13) -#define PM8058_SEC_IRQ_N (GIC_SPI_START + 14) -#define PM8901_SEC_IRQ_N (GIC_SPI_START + 15) -#define TLMM_SCSS_SUMMARY_IRQ (GIC_SPI_START + 16) -#define SPDM_RT_1_IRQ (GIC_SPI_START + 17) -#define SPDM_DIAG_IRQ (GIC_SPI_START + 18) -#define RPM_SCSS_CPU0_GP_HIGH_IRQ (GIC_SPI_START + 19) -#define RPM_SCSS_CPU0_GP_MEDIUM_IRQ (GIC_SPI_START + 20) -#define RPM_SCSS_CPU0_GP_LOW_IRQ (GIC_SPI_START + 21) -#define RPM_SCSS_CPU0_WAKE_UP_IRQ (GIC_SPI_START + 22) -#define RPM_SCSS_CPU1_GP_HIGH_IRQ (GIC_SPI_START + 23) -#define RPM_SCSS_CPU1_GP_MEDIUM_IRQ (GIC_SPI_START + 24) -#define RPM_SCSS_CPU1_GP_LOW_IRQ (GIC_SPI_START + 25) -#define RPM_SCSS_CPU1_WAKE_UP_IRQ (GIC_SPI_START + 26) -#define SSBI2_2_SC_CPU0_SECURE_INT (GIC_SPI_START + 27) -#define SSBI2_2_SC_CPU0_NON_SECURE_INT (GIC_SPI_START + 28) -#define SSBI2_1_SC_CPU0_SECURE_INT (GIC_SPI_START + 29) -#define SSBI2_1_SC_CPU0_NON_SECURE_INT (GIC_SPI_START + 30) -#define MSMC_SC_SEC_CE_IRQ (GIC_SPI_START + 31) -#define MSMC_SC_PRI_CE_IRQ (GIC_SPI_START + 32) -#define MARM_FIQ (GIC_SPI_START + 33) -#define MARM_IRQ (GIC_SPI_START + 34) -#define MARM_L2CC_IRQ (GIC_SPI_START + 35) -#define MARM_WDOG_EXPIRED (GIC_SPI_START + 36) -#define MARM_SCSS_GP_IRQ_0 (GIC_SPI_START + 37) -#define MARM_SCSS_GP_IRQ_1 (GIC_SPI_START + 38) -#define MARM_SCSS_GP_IRQ_2 (GIC_SPI_START + 39) -#define MARM_SCSS_GP_IRQ_3 (GIC_SPI_START + 40) -#define MARM_SCSS_GP_IRQ_4 (GIC_SPI_START + 41) -#define MARM_SCSS_GP_IRQ_5 (GIC_SPI_START + 42) -#define MARM_SCSS_GP_IRQ_6 (GIC_SPI_START + 43) -#define MARM_SCSS_GP_IRQ_7 (GIC_SPI_START + 44) -#define MARM_SCSS_GP_IRQ_8 (GIC_SPI_START + 45) -#define MARM_SCSS_GP_IRQ_9 (GIC_SPI_START + 46) -#define VPE_IRQ (GIC_SPI_START + 47) -#define VFE_IRQ (GIC_SPI_START + 48) -#define VCODEC_IRQ (GIC_SPI_START + 49) -#define TV_ENC_IRQ (GIC_SPI_START + 50) -#define SMMU_VPE_CB_SC_SECURE_IRQ (GIC_SPI_START + 51) -#define SMMU_VPE_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 52) -#define SMMU_VFE_CB_SC_SECURE_IRQ (GIC_SPI_START + 53) -#define SMMU_VFE_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 54) -#define SMMU_VCODEC_B_CB_SC_SECURE_IRQ (GIC_SPI_START + 55) -#define SMMU_VCODEC_B_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 56) -#define SMMU_VCODEC_A_CB_SC_SECURE_IRQ (GIC_SPI_START + 57) -#define SMMU_VCODEC_A_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 58) -#define SMMU_ROT_CB_SC_SECURE_IRQ (GIC_SPI_START + 59) -#define SMMU_ROT_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 60) -#define SMMU_MDP1_CB_SC_SECURE_IRQ (GIC_SPI_START + 61) -#define SMMU_MDP1_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 62) -#define SMMU_MDP0_CB_SC_SECURE_IRQ (GIC_SPI_START + 63) -#define SMMU_MDP0_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 64) -#define SMMU_JPEGD_CB_SC_SECURE_IRQ (GIC_SPI_START + 65) -#define SMMU_JPEGD_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 66) -#define SMMU_IJPEG_CB_SC_SECURE_IRQ (GIC_SPI_START + 67) -#define SMMU_IJPEG_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 68) -#define SMMU_GFX3D_CB_SC_SECURE_IRQ (GIC_SPI_START + 69) -#define SMMU_GFX3D_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 70) -#define SMMU_GFX2D0_CB_SC_SECURE_IRQ (GIC_SPI_START + 71) -#define SMMU_GFX2D0_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 72) -#define ROT_IRQ (GIC_SPI_START + 73) -#define MMSS_FABRIC_IRQ (GIC_SPI_START + 74) -#define MDP_IRQ (GIC_SPI_START + 75) -#define JPEGD_IRQ (GIC_SPI_START + 76) -#define JPEG_IRQ (GIC_SPI_START + 77) -#define MMSS_IMEM_IRQ (GIC_SPI_START + 78) -#define HDMI_IRQ (GIC_SPI_START + 79) -#define GFX3D_IRQ (GIC_SPI_START + 80) -#define GFX2D0_IRQ (GIC_SPI_START + 81) -#define DSI_IRQ (GIC_SPI_START + 82) -#define CSI_1_IRQ (GIC_SPI_START + 83) -#define CSI_0_IRQ (GIC_SPI_START + 84) -#define LPASS_SCSS_AUDIO_IF_OUT0_IRQ (GIC_SPI_START + 85) -#define LPASS_SCSS_MIDI_IRQ (GIC_SPI_START + 86) -#define LPASS_Q6SS_WDOG_EXPIRED (GIC_SPI_START + 87) -#define LPASS_SCSS_GP_LOW_IRQ (GIC_SPI_START + 88) -#define LPASS_SCSS_GP_MEDIUM_IRQ (GIC_SPI_START + 89) -#define LPASS_SCSS_GP_HIGH_IRQ (GIC_SPI_START + 90) -#define TOP_IMEM_IRQ (GIC_SPI_START + 91) -#define FABRIC_SYS_IRQ (GIC_SPI_START + 92) -#define FABRIC_APPS_IRQ (GIC_SPI_START + 93) -#define USB1_HS_BAM_IRQ (GIC_SPI_START + 94) -#define SDC4_BAM_IRQ (GIC_SPI_START + 95) -#define SDC3_BAM_IRQ (GIC_SPI_START + 96) -#define SDC2_BAM_IRQ (GIC_SPI_START + 97) -#define SDC1_BAM_IRQ (GIC_SPI_START + 98) -#define FABRIC_SPS_IRQ (GIC_SPI_START + 99) -#define USB1_HS_IRQ (GIC_SPI_START + 100) -#define SDC4_IRQ_0 (GIC_SPI_START + 101) -#define SDC3_IRQ_0 (GIC_SPI_START + 102) -#define SDC2_IRQ_0 (GIC_SPI_START + 103) -#define SDC1_IRQ_0 (GIC_SPI_START + 104) -#define SPS_BAM_DMA_IRQ (GIC_SPI_START + 105) -#define SPS_SEC_VIOL_IRQ (GIC_SPI_START + 106) -#define SPS_MTI_0 (GIC_SPI_START + 107) -#define SPS_MTI_1 (GIC_SPI_START + 108) -#define SPS_MTI_2 (GIC_SPI_START + 109) -#define SPS_MTI_3 (GIC_SPI_START + 110) -#define SPS_MTI_4 (GIC_SPI_START + 111) -#define SPS_MTI_5 (GIC_SPI_START + 112) -#define SPS_MTI_6 (GIC_SPI_START + 113) -#define SPS_MTI_7 (GIC_SPI_START + 114) -#define SPS_MTI_8 (GIC_SPI_START + 115) -#define SPS_MTI_9 (GIC_SPI_START + 116) -#define SPS_MTI_10 (GIC_SPI_START + 117) -#define SPS_MTI_11 (GIC_SPI_START + 118) -#define SPS_MTI_12 (GIC_SPI_START + 119) -#define SPS_MTI_13 (GIC_SPI_START + 120) -#define SPS_MTI_14 (GIC_SPI_START + 121) -#define SPS_MTI_15 (GIC_SPI_START + 122) -#define SPS_MTI_16 (GIC_SPI_START + 123) -#define SPS_MTI_17 (GIC_SPI_START + 124) -#define SPS_MTI_18 (GIC_SPI_START + 125) -#define SPS_MTI_19 (GIC_SPI_START + 126) -#define SPS_MTI_20 (GIC_SPI_START + 127) -#define SPS_MTI_21 (GIC_SPI_START + 128) -#define SPS_MTI_22 (GIC_SPI_START + 129) -#define SPS_MTI_23 (GIC_SPI_START + 130) -#define SPS_MTI_24 (GIC_SPI_START + 131) -#define SPS_MTI_25 (GIC_SPI_START + 132) -#define SPS_MTI_26 (GIC_SPI_START + 133) -#define SPS_MTI_27 (GIC_SPI_START + 134) -#define SPS_MTI_28 (GIC_SPI_START + 135) -#define SPS_MTI_29 (GIC_SPI_START + 136) -#define SPS_MTI_30 (GIC_SPI_START + 137) -#define SPS_MTI_31 (GIC_SPI_START + 138) -#define UXMC_EBI2_WR_ER_DONE_IRQ (GIC_SPI_START + 139) -#define UXMC_EBI2_OP_DONE_IRQ (GIC_SPI_START + 140) -#define USB2_IRQ (GIC_SPI_START + 141) -#define USB1_IRQ (GIC_SPI_START + 142) -#define TSSC_SSBI_IRQ (GIC_SPI_START + 143) -#define TSSC_SAMPLE_IRQ (GIC_SPI_START + 144) -#define TSSC_PENUP_IRQ (GIC_SPI_START + 145) -#define INT_UART1DM_IRQ (GIC_SPI_START + 146) -#define GSBI1_QUP_IRQ (GIC_SPI_START + 147) -#define INT_UART2DM_IRQ (GIC_SPI_START + 148) -#define GSBI2_QUP_IRQ (GIC_SPI_START + 149) -#define INT_UART3DM_IRQ (GIC_SPI_START + 150) -#define GSBI3_QUP_IRQ (GIC_SPI_START + 151) -#define INT_UART4DM_IRQ (GIC_SPI_START + 152) -#define GSBI4_QUP_IRQ (GIC_SPI_START + 153) -#define INT_UART5DM_IRQ (GIC_SPI_START + 154) -#define GSBI5_QUP_IRQ (GIC_SPI_START + 155) -#define INT_UART6DM_IRQ (GIC_SPI_START + 156) -#define GSBI6_QUP_IRQ (GIC_SPI_START + 157) -#define INT_UART7DM_IRQ (GIC_SPI_START + 158) -#define GSBI7_QUP_IRQ (GIC_SPI_START + 159) -#define INT_UART8DM_IRQ (GIC_SPI_START + 160) -#define GSBI8_QUP_IRQ (GIC_SPI_START + 161) -#define TSIF_TSPP_IRQ (GIC_SPI_START + 162) -#define TSIF_BAM_IRQ (GIC_SPI_START + 163) -#define TSIF2_IRQ (GIC_SPI_START + 164) -#define TSIF1_IRQ (GIC_SPI_START + 165) -#define INT_ADM1_MASTER (GIC_SPI_START + 166) -#define INT_ADM1_AARM (GIC_SPI_START + 167) -#define INT_ADM1_SD2 (GIC_SPI_START + 168) -#define INT_ADM1_SD3 (GIC_SPI_START + 169) -#define INT_ADM0_MASTER (GIC_SPI_START + 170) -#define INT_ADM0_AARM (GIC_SPI_START + 171) -#define INT_ADM0_SD2 (GIC_SPI_START + 172) -#define INT_ADM0_SD3 (GIC_SPI_START + 173) -#define CC_SCSS_WDT1CPU1BITEEXPIRED (GIC_SPI_START + 174) -#define CC_SCSS_WDT1CPU0BITEEXPIRED (GIC_SPI_START + 175) -#define CC_SCSS_WDT0CPU1BITEEXPIRED (GIC_SPI_START + 176) -#define CC_SCSS_WDT0CPU0BITEEXPIRED (GIC_SPI_START + 177) -#define TSENS_UPPER_LOWER_INT (GIC_SPI_START + 178) -#define SSBI2_2_SC_CPU1_SECURE_INT (GIC_SPI_START + 179) -#define SSBI2_2_SC_CPU1_NON_SECURE_INT (GIC_SPI_START + 180) -#define SSBI2_1_SC_CPU1_SECURE_INT (GIC_SPI_START + 181) -#define SSBI2_1_SC_CPU1_NON_SECURE_INT (GIC_SPI_START + 182) -#define XPU_SUMMARY_IRQ (GIC_SPI_START + 183) -#define BUS_EXCEPTION_SUMMARY_IRQ (GIC_SPI_START + 184) -#define HSDDRX_SMICH0_IRQ (GIC_SPI_START + 185) -#define HSDDRX_EBI1_IRQ (GIC_SPI_START + 186) -#define SDC5_BAM_IRQ (GIC_SPI_START + 187) -#define SDC5_IRQ_0 (GIC_SPI_START + 188) -#define INT_UART9DM_IRQ (GIC_SPI_START + 189) -#define GSBI9_QUP_IRQ (GIC_SPI_START + 190) -#define INT_UART10DM_IRQ (GIC_SPI_START + 191) -#define GSBI10_QUP_IRQ (GIC_SPI_START + 192) -#define INT_UART11DM_IRQ (GIC_SPI_START + 193) -#define GSBI11_QUP_IRQ (GIC_SPI_START + 194) -#define INT_UART12DM_IRQ (GIC_SPI_START + 195) -#define GSBI12_QUP_IRQ (GIC_SPI_START + 196) - -/*SPI 197 to 209 arent used in 8x60*/ -#define SMMU_GFX2D1_CB_SC_SECURE_IRQ (GIC_SPI_START + 210) -#define SMMU_GFX2D1_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 211) - -/*SPI 212 to 216 arent used in 8x60*/ -#define SMPSS_SPARE_1 (GIC_SPI_START + 217) -#define SMPSS_SPARE_2 (GIC_SPI_START + 218) -#define SMPSS_SPARE_3 (GIC_SPI_START + 219) -#define SMPSS_SPARE_4 (GIC_SPI_START + 220) -#define SMPSS_SPARE_5 (GIC_SPI_START + 221) -#define SMPSS_SPARE_6 (GIC_SPI_START + 222) -#define SMPSS_SPARE_7 (GIC_SPI_START + 223) - -#define NR_GPIO_IRQS 173 -#define NR_MSM_IRQS 256 -#define NR_BOARD_IRQS 0 - -#endif diff --git a/arch/arm/mach-msm/include/mach/irqs.h b/arch/arm/mach-msm/include/mach/irqs.h index 3cd78b165ab..164d355c96e 100644 --- a/arch/arm/mach-msm/include/mach/irqs.h +++ b/arch/arm/mach-msm/include/mach/irqs.h @@ -24,11 +24,6 @@ #elif defined(CONFIG_ARCH_QSD8X50) #include "irqs-8x50.h" #include "sirc.h" -#elif defined(CONFIG_ARCH_MSM8X60) -#include "irqs-8x60.h" -#elif defined(CONFIG_ARCH_MSM8960) -/* TODO: Make these not generic. */ -#include "irqs-8960.h" #elif defined(CONFIG_ARCH_MSM_ARM11) #include "irqs-7x00.h" #else diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c index 98f6e2adb53..1dc5acd4fc9 100644 --- a/arch/arm/mach-mxs/mach-mxs.c +++ b/arch/arm/mach-mxs/mach-mxs.c @@ -13,8 +13,6 @@ #include <linux/clk.h> #include <linux/clk/mxs.h> #include <linux/clkdev.h> -#include <linux/clocksource.h> -#include <linux/clk-provider.h> #include <linux/delay.h> #include <linux/err.h> #include <linux/gpio.h> @@ -332,6 +330,11 @@ static void __init crystalfontz_init(void) update_fec_mac_prop(OUI_CRYSTALFONTZ); } +static void __init m28cu3_init(void) +{ + update_fec_mac_prop(OUI_DENX); +} + static const char __init *mxs_get_soc_id(void) { struct device_node *np; @@ -459,6 +462,8 @@ static void __init mxs_machine_init(void) apx4devkit_init(); else if (of_machine_is_compatible("crystalfontz,cfa10036")) crystalfontz_init(); + else if (of_machine_is_compatible("msr,m28cu3")) + m28cu3_init(); of_platform_populate(NULL, of_default_bus_match_table, NULL, parent); @@ -490,16 +495,6 @@ static void mxs_restart(enum reboot_mode mode, const char *cmd) soft_restart(0); } -static void __init mxs_timer_init(void) -{ - if (of_machine_is_compatible("fsl,imx23")) - mx23_clocks_init(); - else - mx28_clocks_init(); - of_clk_init(NULL); - clocksource_of_init(); -} - static const char *mxs_dt_compat[] __initdata = { "fsl,imx28", "fsl,imx23", @@ -508,7 +503,6 @@ static const char *mxs_dt_compat[] __initdata = { DT_MACHINE_START(MXS, "Freescale MXS (Device Tree)") .handle_irq = icoll_handle_irq, - .init_time = mxs_timer_init, .init_machine = mxs_machine_init, .init_late = mxs_pm_init, .dt_compat = mxs_dt_compat, diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c index 13e0df9c11c..cce2c9dfb5d 100644 --- a/arch/arm/mach-nomadik/cpu-8815.c +++ b/arch/arm/mach-nomadik/cpu-8815.c @@ -25,15 +25,11 @@ #include <linux/slab.h> #include <linux/irq.h> #include <linux/dma-mapping.h> -#include <linux/platform_data/clk-nomadik.h> -#include <linux/clocksource.h> #include <linux/of_irq.h> #include <linux/of_gpio.h> #include <linux/of_address.h> #include <linux/of_platform.h> -#include <linux/mtd/fsmc.h> #include <linux/gpio.h> -#include <linux/amba/mmci.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -113,50 +109,6 @@ static void cpu8815_restart(enum reboot_mode mode, const char *cmd) writel(1, srcbase + 0x18); } -/* Initial value for SRC control register: all timers use MXTAL/8 source */ -#define SRC_CR_INIT_MASK 0x00007fff -#define SRC_CR_INIT_VAL 0x2aaa8000 - -static void __init cpu8815_timer_init_of(void) -{ - struct device_node *mtu; - void __iomem *base; - int irq; - u32 src_cr; - - /* We need this to be up now */ - nomadik_clk_init(); - - mtu = of_find_node_by_path("/mtu@101e2000"); - if (!mtu) - return; - base = of_iomap(mtu, 0); - if (WARN_ON(!base)) - return; - irq = irq_of_parse_and_map(mtu, 0); - - pr_info("Remapped MTU @ %p, irq: %d\n", base, irq); - - /* Configure timer sources in "system reset controller" ctrl reg */ - src_cr = readl(base); - src_cr &= SRC_CR_INIT_MASK; - src_cr |= SRC_CR_INIT_VAL; - writel(src_cr, base); - - clocksource_of_init(); -} - -static struct fsmc_nand_timings cpu8815_nand_timings = { - .thiz = 0, - .thold = 0x10, - .twait = 0x0A, - .tset = 0, -}; - -static struct fsmc_nand_platform_data cpu8815_nand_data = { - .nand_timings = &cpu8815_nand_timings, -}; - /* * The SMSC911x IRQ is connected to a GPIO pin, but the driver expects * to simply request an IRQ passed as a resource. So the GPIO pin needs @@ -190,15 +142,6 @@ static int __init cpu8815_eth_init(void) device_initcall(cpu8815_eth_init); /* - * TODO: - * cannot be set from device tree, convert to a proper DT - * binding. - */ -static struct mmci_platform_data mmcsd_plat_data = { - .ocr_mask = MMC_VDD_29_30, -}; - -/* * This GPIO pin turns on a line that is used to detect card insertion * on this board. */ @@ -232,24 +175,13 @@ static int __init cpu8815_mmcsd_init(void) } device_initcall(cpu8815_mmcsd_init); - -/* These are mostly to get the right device names for the clock lookups */ -static struct of_dev_auxdata cpu8815_auxdata_lookup[] __initdata = { - OF_DEV_AUXDATA("stericsson,fsmc-nand", NOMADIK_FSMC_BASE, - NULL, &cpu8815_nand_data), - OF_DEV_AUXDATA("arm,primecell", NOMADIK_SDI_BASE, - NULL, &mmcsd_plat_data), - { /* sentinel */ }, -}; - static void __init cpu8815_init_of(void) { #ifdef CONFIG_CACHE_L2X0 /* At full speed latency must be >=2, so 0x249 in low bits */ l2x0_of_init(0x00730249, 0xfe000fff); #endif - of_platform_populate(NULL, of_default_bus_match_table, - cpu8815_auxdata_lookup, NULL); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } static const char * cpu8815_board_compat[] = { @@ -259,7 +191,6 @@ static const char * cpu8815_board_compat[] = { DT_MACHINE_START(NOMADIK_DT, "Nomadik STn8815") .map_io = cpu8815_map_io, - .init_time = cpu8815_timer_init_of, .init_machine = cpu8815_init_of, .restart = cpu8815_restart, .dt_compat = cpu8815_board_compat, diff --git a/arch/arm/mach-nspire/nspire.c b/arch/arm/mach-nspire/nspire.c index 99e26092a9f..4b2ed2e8352 100644 --- a/arch/arm/mach-nspire/nspire.c +++ b/arch/arm/mach-nspire/nspire.c @@ -14,11 +14,9 @@ #include <linux/of_platform.h> #include <linux/irqchip.h> #include <linux/irqchip/arm-vic.h> -#include <linux/clk-provider.h> #include <linux/clkdev.h> #include <linux/amba/bus.h> #include <linux/amba/clcd.h> -#include <linux/clocksource.h> #include <asm/mach/arch.h> #include <asm/mach-types.h> @@ -65,12 +63,6 @@ static void __init nspire_init(void) nspire_auxdata, NULL); } -static void __init nspire_init_time(void) -{ - of_clk_init(NULL); - clocksource_of_init(); -} - static void nspire_restart(char mode, const char *cmd) { void __iomem *base = ioremap(NSPIRE_MISC_PHYS_BASE, SZ_4K); @@ -83,7 +75,6 @@ static void nspire_restart(char mode, const char *cmd) DT_MACHINE_START(NSPIRE, "TI-NSPIRE") .dt_compat = nspire_dt_match, .map_io = nspire_map_io, - .init_time = nspire_init_time, .init_machine = nspire_init, .restart = nspire_restart, MACHINE_END diff --git a/arch/arm/mach-omap1/common.h b/arch/arm/mach-omap1/common.h index abec019a528..732f8ee2fcd 100644 --- a/arch/arm/mach-omap1/common.h +++ b/arch/arm/mach-omap1/common.h @@ -46,6 +46,9 @@ static inline void omap7xx_map_io(void) void omap1510_fpga_init_irq(void); void omap15xx_map_io(void); #else +static inline void omap1510_fpga_init_irq(void) +{ +} static inline void omap15xx_map_io(void) { } diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c index 8bd71b2d096..3c0e4221920 100644 --- a/arch/arm/mach-omap1/fpga.c +++ b/arch/arm/mach-omap1/fpga.c @@ -135,8 +135,7 @@ static struct irq_chip omap_fpga_irq = { * mask_ack routine for all of the FPGA interrupts has been changed from * fpga_mask_ack_irq() to fpga_ack_irq() so that the specific FPGA interrupt * being serviced is left unmasked. We can do this because the FPGA cascade - * interrupt is installed with the IRQF_DISABLED flag, which leaves all - * interrupts masked at the CPU while an FPGA interrupt handler executes. + * interrupt is run with all interrupts masked. * * Limited testing indicates that this workaround appears to be effective * for the smc9194 Ethernet driver used on the Innovator. It should work diff --git a/arch/arm/mach-omap1/gpio15xx.c b/arch/arm/mach-omap1/gpio15xx.c index 02b3eb2e201..312a0924d78 100644 --- a/arch/arm/mach-omap1/gpio15xx.c +++ b/arch/arm/mach-omap1/gpio15xx.c @@ -25,7 +25,7 @@ #define OMAP1510_GPIO_BASE 0xFFFCE000 /* gpio1 */ -static struct __initdata resource omap15xx_mpu_gpio_resources[] = { +static struct resource omap15xx_mpu_gpio_resources[] = { { .start = OMAP1_MPUIO_VBASE, .end = OMAP1_MPUIO_VBASE + SZ_2K - 1, @@ -48,7 +48,7 @@ static struct omap_gpio_reg_offs omap15xx_mpuio_regs = { .irqctrl = OMAP_MPUIO_GPIO_INT_EDGE, }; -static struct __initdata omap_gpio_platform_data omap15xx_mpu_gpio_config = { +static struct omap_gpio_platform_data omap15xx_mpu_gpio_config = { .is_mpuio = true, .bank_width = 16, .bank_stride = 1, @@ -66,7 +66,7 @@ static struct platform_device omap15xx_mpu_gpio = { }; /* gpio2 */ -static struct __initdata resource omap15xx_gpio_resources[] = { +static struct resource omap15xx_gpio_resources[] = { { .start = OMAP1510_GPIO_BASE, .end = OMAP1510_GPIO_BASE + SZ_2K - 1, @@ -90,7 +90,7 @@ static struct omap_gpio_reg_offs omap15xx_gpio_regs = { .pinctrl = OMAP1510_GPIO_PIN_CONTROL, }; -static struct __initdata omap_gpio_platform_data omap15xx_gpio_config = { +static struct omap_gpio_platform_data omap15xx_gpio_config = { .bank_width = 16, .regs = &omap15xx_gpio_regs, }; diff --git a/arch/arm/mach-omap1/gpio16xx.c b/arch/arm/mach-omap1/gpio16xx.c index b9952a258d8..6e6ec93dcbb 100644 --- a/arch/arm/mach-omap1/gpio16xx.c +++ b/arch/arm/mach-omap1/gpio16xx.c @@ -31,7 +31,7 @@ #define SYSCONFIG_WORD 0x14 /* mpu gpio */ -static struct __initdata resource omap16xx_mpu_gpio_resources[] = { +static struct resource omap16xx_mpu_gpio_resources[] = { { .start = OMAP1_MPUIO_VBASE, .end = OMAP1_MPUIO_VBASE + SZ_2K - 1, @@ -54,7 +54,7 @@ static struct omap_gpio_reg_offs omap16xx_mpuio_regs = { .irqctrl = OMAP_MPUIO_GPIO_INT_EDGE, }; -static struct __initdata omap_gpio_platform_data omap16xx_mpu_gpio_config = { +static struct omap_gpio_platform_data omap16xx_mpu_gpio_config = { .is_mpuio = true, .bank_width = 16, .bank_stride = 1, @@ -72,7 +72,7 @@ static struct platform_device omap16xx_mpu_gpio = { }; /* gpio1 */ -static struct __initdata resource omap16xx_gpio1_resources[] = { +static struct resource omap16xx_gpio1_resources[] = { { .start = OMAP1610_GPIO1_BASE, .end = OMAP1610_GPIO1_BASE + SZ_2K - 1, @@ -100,7 +100,7 @@ static struct omap_gpio_reg_offs omap16xx_gpio_regs = { .edgectrl2 = OMAP1610_GPIO_EDGE_CTRL2, }; -static struct __initdata omap_gpio_platform_data omap16xx_gpio1_config = { +static struct omap_gpio_platform_data omap16xx_gpio1_config = { .bank_width = 16, .regs = &omap16xx_gpio_regs, }; @@ -116,7 +116,7 @@ static struct platform_device omap16xx_gpio1 = { }; /* gpio2 */ -static struct __initdata resource omap16xx_gpio2_resources[] = { +static struct resource omap16xx_gpio2_resources[] = { { .start = OMAP1610_GPIO2_BASE, .end = OMAP1610_GPIO2_BASE + SZ_2K - 1, @@ -128,7 +128,7 @@ static struct __initdata resource omap16xx_gpio2_resources[] = { }, }; -static struct __initdata omap_gpio_platform_data omap16xx_gpio2_config = { +static struct omap_gpio_platform_data omap16xx_gpio2_config = { .bank_width = 16, .regs = &omap16xx_gpio_regs, }; @@ -144,7 +144,7 @@ static struct platform_device omap16xx_gpio2 = { }; /* gpio3 */ -static struct __initdata resource omap16xx_gpio3_resources[] = { +static struct resource omap16xx_gpio3_resources[] = { { .start = OMAP1610_GPIO3_BASE, .end = OMAP1610_GPIO3_BASE + SZ_2K - 1, @@ -156,7 +156,7 @@ static struct __initdata resource omap16xx_gpio3_resources[] = { }, }; -static struct __initdata omap_gpio_platform_data omap16xx_gpio3_config = { +static struct omap_gpio_platform_data omap16xx_gpio3_config = { .bank_width = 16, .regs = &omap16xx_gpio_regs, }; @@ -172,7 +172,7 @@ static struct platform_device omap16xx_gpio3 = { }; /* gpio4 */ -static struct __initdata resource omap16xx_gpio4_resources[] = { +static struct resource omap16xx_gpio4_resources[] = { { .start = OMAP1610_GPIO4_BASE, .end = OMAP1610_GPIO4_BASE + SZ_2K - 1, @@ -184,7 +184,7 @@ static struct __initdata resource omap16xx_gpio4_resources[] = { }, }; -static struct __initdata omap_gpio_platform_data omap16xx_gpio4_config = { +static struct omap_gpio_platform_data omap16xx_gpio4_config = { .bank_width = 16, .regs = &omap16xx_gpio_regs, }; @@ -199,7 +199,7 @@ static struct platform_device omap16xx_gpio4 = { .resource = omap16xx_gpio4_resources, }; -static struct __initdata platform_device * omap16xx_gpio_dev[] = { +static struct platform_device *omap16xx_gpio_dev[] __initdata = { &omap16xx_mpu_gpio, &omap16xx_gpio1, &omap16xx_gpio2, diff --git a/arch/arm/mach-omap1/gpio7xx.c b/arch/arm/mach-omap1/gpio7xx.c index f5819b2b7cb..4612d2506a2 100644 --- a/arch/arm/mach-omap1/gpio7xx.c +++ b/arch/arm/mach-omap1/gpio7xx.c @@ -30,7 +30,7 @@ #define OMAP1_MPUIO_VBASE OMAP1_MPUIO_BASE /* mpu gpio */ -static struct __initdata resource omap7xx_mpu_gpio_resources[] = { +static struct resource omap7xx_mpu_gpio_resources[] = { { .start = OMAP1_MPUIO_VBASE, .end = OMAP1_MPUIO_VBASE + SZ_2K - 1, @@ -53,7 +53,7 @@ static struct omap_gpio_reg_offs omap7xx_mpuio_regs = { .irqctrl = OMAP_MPUIO_GPIO_INT_EDGE >> 1, }; -static struct __initdata omap_gpio_platform_data omap7xx_mpu_gpio_config = { +static struct omap_gpio_platform_data omap7xx_mpu_gpio_config = { .is_mpuio = true, .bank_width = 16, .bank_stride = 2, @@ -71,7 +71,7 @@ static struct platform_device omap7xx_mpu_gpio = { }; /* gpio1 */ -static struct __initdata resource omap7xx_gpio1_resources[] = { +static struct resource omap7xx_gpio1_resources[] = { { .start = OMAP7XX_GPIO1_BASE, .end = OMAP7XX_GPIO1_BASE + SZ_2K - 1, @@ -94,7 +94,7 @@ static struct omap_gpio_reg_offs omap7xx_gpio_regs = { .irqctrl = OMAP7XX_GPIO_INT_CONTROL, }; -static struct __initdata omap_gpio_platform_data omap7xx_gpio1_config = { +static struct omap_gpio_platform_data omap7xx_gpio1_config = { .bank_width = 32, .regs = &omap7xx_gpio_regs, }; @@ -110,7 +110,7 @@ static struct platform_device omap7xx_gpio1 = { }; /* gpio2 */ -static struct __initdata resource omap7xx_gpio2_resources[] = { +static struct resource omap7xx_gpio2_resources[] = { { .start = OMAP7XX_GPIO2_BASE, .end = OMAP7XX_GPIO2_BASE + SZ_2K - 1, @@ -122,7 +122,7 @@ static struct __initdata resource omap7xx_gpio2_resources[] = { }, }; -static struct __initdata omap_gpio_platform_data omap7xx_gpio2_config = { +static struct omap_gpio_platform_data omap7xx_gpio2_config = { .bank_width = 32, .regs = &omap7xx_gpio_regs, }; @@ -138,7 +138,7 @@ static struct platform_device omap7xx_gpio2 = { }; /* gpio3 */ -static struct __initdata resource omap7xx_gpio3_resources[] = { +static struct resource omap7xx_gpio3_resources[] = { { .start = OMAP7XX_GPIO3_BASE, .end = OMAP7XX_GPIO3_BASE + SZ_2K - 1, @@ -150,7 +150,7 @@ static struct __initdata resource omap7xx_gpio3_resources[] = { }, }; -static struct __initdata omap_gpio_platform_data omap7xx_gpio3_config = { +static struct omap_gpio_platform_data omap7xx_gpio3_config = { .bank_width = 32, .regs = &omap7xx_gpio_regs, }; @@ -166,7 +166,7 @@ static struct platform_device omap7xx_gpio3 = { }; /* gpio4 */ -static struct __initdata resource omap7xx_gpio4_resources[] = { +static struct resource omap7xx_gpio4_resources[] = { { .start = OMAP7XX_GPIO4_BASE, .end = OMAP7XX_GPIO4_BASE + SZ_2K - 1, @@ -178,7 +178,7 @@ static struct __initdata resource omap7xx_gpio4_resources[] = { }, }; -static struct __initdata omap_gpio_platform_data omap7xx_gpio4_config = { +static struct omap_gpio_platform_data omap7xx_gpio4_config = { .bank_width = 32, .regs = &omap7xx_gpio_regs, }; @@ -194,7 +194,7 @@ static struct platform_device omap7xx_gpio4 = { }; /* gpio5 */ -static struct __initdata resource omap7xx_gpio5_resources[] = { +static struct resource omap7xx_gpio5_resources[] = { { .start = OMAP7XX_GPIO5_BASE, .end = OMAP7XX_GPIO5_BASE + SZ_2K - 1, @@ -206,7 +206,7 @@ static struct __initdata resource omap7xx_gpio5_resources[] = { }, }; -static struct __initdata omap_gpio_platform_data omap7xx_gpio5_config = { +static struct omap_gpio_platform_data omap7xx_gpio5_config = { .bank_width = 32, .regs = &omap7xx_gpio_regs, }; @@ -222,7 +222,7 @@ static struct platform_device omap7xx_gpio5 = { }; /* gpio6 */ -static struct __initdata resource omap7xx_gpio6_resources[] = { +static struct resource omap7xx_gpio6_resources[] = { { .start = OMAP7XX_GPIO6_BASE, .end = OMAP7XX_GPIO6_BASE + SZ_2K - 1, @@ -234,7 +234,7 @@ static struct __initdata resource omap7xx_gpio6_resources[] = { }, }; -static struct __initdata omap_gpio_platform_data omap7xx_gpio6_config = { +static struct omap_gpio_platform_data omap7xx_gpio6_config = { .bank_width = 32, .regs = &omap7xx_gpio_regs, }; @@ -249,7 +249,7 @@ static struct platform_device omap7xx_gpio6 = { .resource = omap7xx_gpio6_resources, }; -static struct __initdata platform_device * omap7xx_gpio_dev[] = { +static struct platform_device *omap7xx_gpio_dev[] __initdata = { &omap7xx_mpu_gpio, &omap7xx_gpio1, &omap7xx_gpio2, diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index 358b82cb9f7..40a1ae31961 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -628,7 +628,6 @@ static irqreturn_t omap_wakeup_interrupt(int irq, void *dev) static struct irqaction omap_wakeup_irq = { .name = "peripheral wakeup", - .flags = IRQF_DISABLED, .handler = omap_wakeup_interrupt }; diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c index 80603d2fef7..6b5f298d663 100644 --- a/arch/arm/mach-omap1/time.c +++ b/arch/arm/mach-omap1/time.c @@ -160,7 +160,7 @@ static irqreturn_t omap_mpu_timer1_interrupt(int irq, void *dev_id) static struct irqaction omap_mpu_timer1_irq = { .name = "mpu_timer1", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .flags = IRQF_TIMER | IRQF_IRQPOLL, .handler = omap_mpu_timer1_interrupt, }; diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c index 0b74246ba62..107e7ab3edb 100644 --- a/arch/arm/mach-omap1/timer32k.c +++ b/arch/arm/mach-omap1/timer32k.c @@ -156,7 +156,7 @@ static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id) static struct irqaction omap_32k_timer_irq = { .name = "32KHz timer", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .flags = IRQF_TIMER | IRQF_IRQPOLL, .handler = omap_32k_timer_interrupt, }; diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index b5fb5f7992d..dc21df16616 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -8,7 +8,6 @@ config ARCH_OMAP2 select CPU_V6 select MULTI_IRQ_HANDLER select SOC_HAS_OMAP2_SDRC - select COMMON_CLK config ARCH_OMAP3 bool "TI OMAP3" @@ -22,7 +21,6 @@ config ARCH_OMAP3 select PM_OPP if PM select PM_RUNTIME if CPU_IDLE select SOC_HAS_OMAP2_SDRC - select COMMON_CLK select USB_ARCH_HAS_EHCI if USB_SUPPORT config ARCH_OMAP4 @@ -45,7 +43,6 @@ config ARCH_OMAP4 select PM_OPP if PM select PM_RUNTIME if CPU_IDLE select USB_ARCH_HAS_EHCI if USB_SUPPORT - select COMMON_CLK select ARM_ERRATA_754322 select ARM_ERRATA_775420 @@ -59,7 +56,6 @@ config SOC_OMAP5 select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if LOCAL_TIMERS select HAVE_SMP - select COMMON_CLK select HAVE_ARM_ARCH_TIMER select ARM_ERRATA_798181 if SMP @@ -70,7 +66,6 @@ config SOC_AM33XX select ARM_CPU_SUSPEND if PM select CPU_V7 select MULTI_IRQ_HANDLER - select COMMON_CLK config SOC_AM43XX bool "TI AM43x" @@ -79,7 +74,6 @@ config SOC_AM43XX select ARCH_OMAP2PLUS select MULTI_IRQ_HANDLER select ARM_GIC - select COMMON_CLK select MACH_OMAP_GENERIC config ARCH_OMAP2PLUS @@ -89,11 +83,11 @@ config ARCH_OMAP2PLUS select ARCH_HAS_HOLES_MEMORYMODEL select ARCH_OMAP select ARCH_REQUIRE_GPIOLIB - select CLKDEV_LOOKUP select CLKSRC_MMIO + select COMMON_CLK select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP - select HAVE_CLK + select MACH_OMAP_GENERIC select OMAP_DM_TIMER select PINCTRL select PROC_DEVICETREE if PROC_FS @@ -187,16 +181,11 @@ config OMAP_PACKAGE_CUS config OMAP_PACKAGE_CBP bool -comment "OMAP Board Type" +comment "OMAP Legacy Platform Data Board Type" depends on ARCH_OMAP2PLUS config MACH_OMAP_GENERIC - bool "Generic OMAP2+ board" - depends on ARCH_OMAP2PLUS - default y - help - Support for generic TI OMAP2+ boards using Flattened Device Tree. - More information at Documentation/devicetree + bool config MACH_OMAP2_TUSB6010 bool @@ -260,12 +249,6 @@ config MACH_OVERO default y select OMAP_PACKAGE_CBB -config MACH_OMAP3EVM - bool "OMAP 3530 EVM board" - depends on ARCH_OMAP3 - default y - select OMAP_PACKAGE_CBB - config MACH_OMAP3517EVM bool "OMAP3517/ AM3517 EVM board" depends on ARCH_OMAP3 @@ -314,33 +297,12 @@ config MACH_NOKIA_N8X0 select MACH_NOKIA_N810_WIMAX select OMAP_PACKAGE_ZAC -config MACH_NOKIA_RM680 - bool "Nokia N950 (RM-680) / N9 (RM-696) phones" - depends on ARCH_OMAP3 - default y - select MACH_NOKIA_RM696 - select OMAP_PACKAGE_CBB - config MACH_NOKIA_RX51 bool "Nokia N900 (RX-51) phone" depends on ARCH_OMAP3 default y select OMAP_PACKAGE_CBB -config MACH_OMAP_ZOOM2 - bool "OMAP3 Zoom2 board" - depends on ARCH_OMAP3 - default y - select OMAP_PACKAGE_CBB - select REGULATOR_FIXED_VOLTAGE if REGULATOR - -config MACH_OMAP_ZOOM3 - bool "OMAP3630 Zoom3 board" - depends on ARCH_OMAP3 - default y - select OMAP_PACKAGE_CBP - select REGULATOR_FIXED_VOLTAGE if REGULATOR - config MACH_CM_T35 bool "CompuLab CM-T35/CM-T3730 modules" depends on ARCH_OMAP3 @@ -357,31 +319,12 @@ config MACH_CM_T3517 config MACH_CM_T3730 bool -config MACH_IGEP0020 - bool "IGEP v2 board" - depends on ARCH_OMAP3 - default y - select OMAP_PACKAGE_CBB - -config MACH_IGEP0030 - bool "IGEP OMAP3 module" - depends on ARCH_OMAP3 - default y - select MACH_IGEP0020 - select OMAP_PACKAGE_CBB - config MACH_SBC3530 bool "OMAP3 SBC STALKER board" depends on ARCH_OMAP3 default y select OMAP_PACKAGE_CUS -config MACH_OMAP_3630SDP - bool "OMAP3630 SDP board" - depends on ARCH_OMAP3 - default y - select OMAP_PACKAGE_CBP - config MACH_TI8168EVM bool "TI8168 Evaluation Module" depends on SOC_TI81XX diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index afb457c3135..e15ac005ef1 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -8,7 +8,7 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \ # Common support obj-y := id.o io.o control.o mux.o devices.o fb.o serial.o gpmc.o timer.o pm.o \ common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \ - omap_device.o sram.o + omap_device.o sram.o drm.o omap-2-3-common = irq.o hwmod-common = omap_hwmod.o omap_hwmod_reset.o \ @@ -112,13 +112,13 @@ obj-$(CONFIG_ARCH_OMAP2) += prm2xxx_3xxx.o prm2xxx.o cm2xxx.o obj-$(CONFIG_ARCH_OMAP3) += prm2xxx_3xxx.o prm3xxx.o cm3xxx.o obj-$(CONFIG_ARCH_OMAP3) += vc3xxx_data.o vp3xxx_data.o obj-$(CONFIG_SOC_AM33XX) += prm33xx.o cm33xx.o -obj-$(CONFIG_SOC_AM43XX) += prm33xx.o cm33xx.o omap-prcm-4-5-common = cminst44xx.o cm44xx.o prm44xx.o \ prcm_mpu44xx.o prminst44xx.o \ vc44xx_data.o vp44xx_data.o obj-$(CONFIG_ARCH_OMAP4) += $(omap-prcm-4-5-common) obj-$(CONFIG_SOC_OMAP5) += $(omap-prcm-4-5-common) obj-$(CONFIG_SOC_DRA7XX) += $(omap-prcm-4-5-common) +obj-$(CONFIG_SOC_AM43XX) += $(omap-prcm-4-5-common) # OMAP voltage domains voltagedomain-common := voltage.o vc.o vp.o @@ -146,6 +146,7 @@ obj-$(CONFIG_ARCH_OMAP4) += powerdomains44xx_data.o obj-$(CONFIG_SOC_AM33XX) += $(powerdomain-common) obj-$(CONFIG_SOC_AM33XX) += powerdomains33xx_data.o obj-$(CONFIG_SOC_AM43XX) += $(powerdomain-common) +obj-$(CONFIG_SOC_AM43XX) += powerdomains43xx_data.o obj-$(CONFIG_SOC_OMAP5) += $(powerdomain-common) obj-$(CONFIG_SOC_OMAP5) += powerdomains54xx_data.o obj-$(CONFIG_SOC_DRA7XX) += $(powerdomain-common) @@ -165,6 +166,7 @@ obj-$(CONFIG_ARCH_OMAP4) += clockdomains44xx_data.o obj-$(CONFIG_SOC_AM33XX) += $(clockdomain-common) obj-$(CONFIG_SOC_AM33XX) += clockdomains33xx_data.o obj-$(CONFIG_SOC_AM43XX) += $(clockdomain-common) +obj-$(CONFIG_SOC_AM43XX) += clockdomains43xx_data.o obj-$(CONFIG_SOC_OMAP5) += $(clockdomain-common) obj-$(CONFIG_SOC_OMAP5) += clockdomains54xx_data.o obj-$(CONFIG_SOC_DRA7XX) += $(clockdomain-common) @@ -210,6 +212,11 @@ obj-$(CONFIG_ARCH_OMAP3) += omap_hwmod_2xxx_3xxx_ipblock_data.o obj-$(CONFIG_ARCH_OMAP3) += omap_hwmod_2xxx_3xxx_interconnect_data.o obj-$(CONFIG_ARCH_OMAP3) += omap_hwmod_3xxx_data.o obj-$(CONFIG_SOC_AM33XX) += omap_hwmod_33xx_data.o +obj-$(CONFIG_SOC_AM33XX) += omap_hwmod_33xx_43xx_interconnect_data.o +obj-$(CONFIG_SOC_AM33XX) += omap_hwmod_33xx_43xx_ipblock_data.o +obj-$(CONFIG_SOC_AM43XX) += omap_hwmod_43xx_data.o +obj-$(CONFIG_SOC_AM43XX) += omap_hwmod_33xx_43xx_interconnect_data.o +obj-$(CONFIG_SOC_AM43XX) += omap_hwmod_33xx_43xx_ipblock_data.o obj-$(CONFIG_ARCH_OMAP4) += omap_hwmod_44xx_data.o obj-$(CONFIG_SOC_OMAP5) += omap_hwmod_54xx_data.o obj-$(CONFIG_SOC_DRA7XX) += omap_hwmod_7xx_data.o @@ -228,12 +235,8 @@ endif # OMAP2420 MSDI controller integration support ("MMC") obj-$(CONFIG_SOC_OMAP2420) += msdi.o -ifneq ($(CONFIG_DRM_OMAP),) -obj-y += drm.o -endif - # Specific board support -obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o +obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o pdata-quirks.o obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o obj-$(CONFIG_MACH_OMAP_2430SDP) += board-2430sdp.o obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o @@ -242,26 +245,14 @@ obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o obj-$(CONFIG_MACH_OMAP3530_LV_SOM) += board-omap3logic.o obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o obj-$(CONFIG_MACH_OVERO) += board-overo.o -obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o obj-$(CONFIG_MACH_OMAP_3430SDP) += board-3430sdp.o obj-$(CONFIG_MACH_NOKIA_N8X0) += board-n8x0.o -obj-$(CONFIG_MACH_NOKIA_RM680) += board-rm680.o sdram-nokia.o obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o sdram-nokia.o obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51-peripherals.o obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51-video.o -obj-$(CONFIG_MACH_OMAP_ZOOM2) += board-zoom.o board-zoom-peripherals.o -obj-$(CONFIG_MACH_OMAP_ZOOM2) += board-zoom-display.o -obj-$(CONFIG_MACH_OMAP_ZOOM2) += board-zoom-debugboard.o -obj-$(CONFIG_MACH_OMAP_ZOOM3) += board-zoom.o board-zoom-peripherals.o -obj-$(CONFIG_MACH_OMAP_ZOOM3) += board-zoom-display.o -obj-$(CONFIG_MACH_OMAP_ZOOM3) += board-zoom-debugboard.o -obj-$(CONFIG_MACH_OMAP_3630SDP) += board-3630sdp.o -obj-$(CONFIG_MACH_OMAP_3630SDP) += board-zoom-peripherals.o -obj-$(CONFIG_MACH_OMAP_3630SDP) += board-zoom-display.o obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o obj-$(CONFIG_MACH_CM_T3517) += board-cm-t3517.o -obj-$(CONFIG_MACH_IGEP0020) += board-igep0020.o obj-$(CONFIG_MACH_TOUCHBOOK) += board-omap3touchbook.o obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c deleted file mode 100644 index 20d6d818924..00000000000 --- a/arch/arm/mach-omap2/board-3630sdp.c +++ /dev/null @@ -1,225 +0,0 @@ -/* - * Copyright (C) 2009 Texas Instruments Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/input.h> -#include <linux/gpio.h> -#include <linux/mtd/nand.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -#include "common.h" -#include "gpmc-smc91x.h" - -#include "board-zoom.h" - -#include "board-flash.h" -#include "mux.h" -#include "sdram-hynix-h8mbx00u0mer-0em.h" - -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) - -static struct omap_smc91x_platform_data board_smc91x_data = { - .cs = 3, - .flags = GPMC_MUX_ADD_DATA | IORESOURCE_IRQ_LOWLEVEL, -}; - -static void __init board_smc91x_init(void) -{ - board_smc91x_data.gpio_irq = 158; - gpmc_smc91x_init(&board_smc91x_data); -} - -#else - -static inline void board_smc91x_init(void) -{ -} - -#endif /* defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) */ - -static void enable_board_wakeup_source(void) -{ - /* T2 interrupt line (keypad) */ - omap_mux_init_signal("sys_nirq", - OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP); -} - -static struct usbhs_phy_data phy_data[] __initdata = { - { - .port = 1, - .reset_gpio = 126, - .vcc_gpio = -EINVAL, - }, - { - .port = 2, - .reset_gpio = 61, - .vcc_gpio = -EINVAL, - }, -}; - -static struct usbhs_omap_platform_data usbhs_bdata __initdata = { - - .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, -}; - -#ifdef CONFIG_OMAP_MUX -static struct omap_board_mux board_mux[] __initdata = { - { .reg_offset = OMAP_MUX_TERMINATOR }, -}; -#endif - -/* - * SDP3630 CS organization - * See also the Switch S8 settings in the comments. - */ -static char chip_sel_sdp[][GPMC_CS_NUM] = { - {PDC_NOR, PDC_NAND, PDC_ONENAND, DBG_MPDB, 0, 0, 0, 0}, /* S8:1111 */ - {PDC_ONENAND, PDC_NAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1110 */ - {PDC_NAND, PDC_ONENAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1101 */ -}; - -static struct mtd_partition sdp_nor_partitions[] = { - /* bootloader (U-Boot, etc) in first sector */ - { - .name = "Bootloader-NOR", - .offset = 0, - .size = SZ_256K, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - /* bootloader params in the next sector */ - { - .name = "Params-NOR", - .offset = MTDPART_OFS_APPEND, - .size = SZ_256K, - .mask_flags = 0, - }, - /* kernel */ - { - .name = "Kernel-NOR", - .offset = MTDPART_OFS_APPEND, - .size = SZ_2M, - .mask_flags = 0 - }, - /* file system */ - { - .name = "Filesystem-NOR", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - .mask_flags = 0 - } -}; - -static struct mtd_partition sdp_onenand_partitions[] = { - { - .name = "X-Loader-OneNAND", - .offset = 0, - .size = 4 * (64 * 2048), - .mask_flags = MTD_WRITEABLE /* force read-only */ - }, - { - .name = "U-Boot-OneNAND", - .offset = MTDPART_OFS_APPEND, - .size = 2 * (64 * 2048), - .mask_flags = MTD_WRITEABLE /* force read-only */ - }, - { - .name = "U-Boot Environment-OneNAND", - .offset = MTDPART_OFS_APPEND, - .size = 1 * (64 * 2048), - }, - { - .name = "Kernel-OneNAND", - .offset = MTDPART_OFS_APPEND, - .size = 16 * (64 * 2048), - }, - { - .name = "File System-OneNAND", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct mtd_partition sdp_nand_partitions[] = { - /* All the partition sizes are listed in terms of NAND block size */ - { - .name = "X-Loader-NAND", - .offset = 0, - .size = 4 * (64 * 2048), - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - { - .name = "U-Boot-NAND", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */ - .size = 10 * (64 * 2048), - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - { - .name = "Boot Env-NAND", - - .offset = MTDPART_OFS_APPEND, /* Offset = 0x1c0000 */ - .size = 6 * (64 * 2048), - }, - { - .name = "Kernel-NAND", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */ - .size = 40 * (64 * 2048), - }, - { - .name = "File System - NAND", - .size = MTDPART_SIZ_FULL, - .offset = MTDPART_OFS_APPEND, /* Offset = 0x780000 */ - }, -}; - -static struct flash_partitions sdp_flash_partitions[] = { - { - .parts = sdp_nor_partitions, - .nr_parts = ARRAY_SIZE(sdp_nor_partitions), - }, - { - .parts = sdp_onenand_partitions, - .nr_parts = ARRAY_SIZE(sdp_onenand_partitions), - }, - { - .parts = sdp_nand_partitions, - .nr_parts = ARRAY_SIZE(sdp_nand_partitions), - }, -}; - -static void __init omap_sdp_init(void) -{ - omap3_mux_init(board_mux, OMAP_PACKAGE_CBP); - zoom_peripherals_init(); - omap_sdrc_init(h8mbx00u0mer0em_sdrc_params, - h8mbx00u0mer0em_sdrc_params); - zoom_display_init(); - board_smc91x_init(); - board_flash_init(sdp_flash_partitions, chip_sel_sdp, NAND_BUSWIDTH_16); - enable_board_wakeup_source(); - - usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); - usbhs_init(&usbhs_bdata); -} - -MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board") - .atag_offset = 0x100, - .reserve = omap_reserve, - .map_io = omap3_map_io, - .init_early = omap3630_init_early, - .init_irq = omap3_init_irq, - .handle_irq = omap3_intc_handle_irq, - .init_machine = omap_sdp_init, - .init_late = omap3630_init_late, - .init_time = omap3_sync32k_timer_init, - .restart = omap3xxx_restart, -MACHINE_END diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 87162e1b94a..19f1652e94c 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -15,13 +15,10 @@ #include <linux/of_irq.h> #include <linux/of_platform.h> #include <linux/irqdomain.h> -#include <linux/clk.h> #include <asm/mach/arch.h> #include "common.h" -#include "common-board-devices.h" -#include "dss-common.h" #if !(defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)) #define intc_of_init NULL @@ -36,40 +33,9 @@ static struct of_device_id omap_dt_match_table[] __initdata = { { } }; -/* - * Create alias for USB host PHY clock. - * Remove this when clock phandle can be provided via DT - */ -static void __init legacy_init_ehci_clk(char *clkname) -{ - int ret; - - ret = clk_add_alias("main_clk", NULL, clkname, NULL); - if (ret) { - pr_err("%s:Failed to add main_clk alias to %s :%d\n", - __func__, clkname, ret); - } -} - static void __init omap_generic_init(void) { - omap_sdrc_init(NULL, NULL); - - of_platform_populate(NULL, omap_dt_match_table, NULL, NULL); - - /* - * HACK: call display setup code for selected boards to enable omapdss. - * This will be removed when omapdss supports DT. - */ - if (of_machine_is_compatible("ti,omap4-panda")) { - omap4_panda_display_init_of(); - legacy_init_ehci_clk("auxclk3_ck"); - - } - else if (of_machine_is_compatible("ti,omap4-sdp")) - omap_4430sdp_display_init_of(); - else if (of_machine_is_compatible("ti,omap5-uevm")) - legacy_init_ehci_clk("auxclk1_ck"); + pdata_quirks_init(omap_dt_match_table); } #ifdef CONFIG_SOC_OMAP2420 @@ -180,6 +146,7 @@ DT_MACHINE_START(AM33XX_DT, "Generic AM33XX (Flattened Device Tree)") .init_irq = omap_intc_of_init, .handle_irq = omap3_intc_handle_irq, .init_machine = omap_generic_init, + .init_late = am33xx_init_late, .init_time = omap3_gptimer_timer_init, .dt_compat = am33xx_boards_compat, .restart = am33xx_restart, @@ -219,6 +186,7 @@ DT_MACHINE_START(OMAP5_DT, "Generic OMAP5 (Flattened Device Tree)") .init_early = omap5_init_early, .init_irq = omap_gic_of_init, .init_machine = omap_generic_init, + .init_late = omap5_init_late, .init_time = omap5_realtime_timer_init, .dt_compat = omap5_boards_compat, .restart = omap44xx_restart, @@ -234,6 +202,7 @@ static const char *am43_boards_compat[] __initdata = { DT_MACHINE_START(AM43_DT, "Generic AM43 (Flattened Device Tree)") .map_io = am33xx_map_io, .init_early = am43xx_init_early, + .init_late = am43xx_init_late, .init_irq = omap_gic_of_init, .init_machine = omap_generic_init, .init_time = omap3_sync32k_timer_init, @@ -252,6 +221,7 @@ DT_MACHINE_START(DRA7XX_DT, "Generic DRA7XX (Flattened Device Tree)") .smp = smp_ops(omap4_smp_ops), .map_io = omap5_map_io, .init_early = dra7xx_init_early, + .init_late = dra7xx_init_late, .init_irq = omap_gic_of_init, .init_machine = omap_generic_init, .init_time = omap5_realtime_timer_init, diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c deleted file mode 100644 index 06dbb2d3d38..00000000000 --- a/arch/arm/mach-omap2/board-igep0020.c +++ /dev/null @@ -1,718 +0,0 @@ -/* - * Copyright (C) 2009 Integration Software and Electronic Engineering. - * - * Modified from mach-omap2/board-generic.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/gpio.h> -#include <linux/interrupt.h> -#include <linux/input.h> -#include <linux/usb/phy.h> - -#include <linux/regulator/machine.h> -#include <linux/regulator/fixed.h> -#include <linux/i2c/twl.h> -#include <linux/mmc/host.h> - -#include <linux/mtd/nand.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -#include <video/omapdss.h> -#include <video/omap-panel-data.h> -#include <linux/platform_data/mtd-onenand-omap2.h> - -#include "common.h" -#include "gpmc.h" -#include "mux.h" -#include "hsmmc.h" -#include "sdram-numonyx-m65kxxxxam.h" -#include "common-board-devices.h" -#include "board-flash.h" -#include "control.h" -#include "gpmc-onenand.h" - -#define IGEP2_SMSC911X_CS 5 -#define IGEP2_SMSC911X_GPIO 176 -#define IGEP2_GPIO_USBH_NRESET 24 -#define IGEP2_GPIO_LED0_GREEN 26 -#define IGEP2_GPIO_LED0_RED 27 -#define IGEP2_GPIO_LED1_RED 28 -#define IGEP2_GPIO_DVI_PUP 170 - -#define IGEP2_RB_GPIO_WIFI_NPD 94 -#define IGEP2_RB_GPIO_WIFI_NRESET 95 -#define IGEP2_RB_GPIO_BT_NRESET 137 -#define IGEP2_RC_GPIO_WIFI_NPD 138 -#define IGEP2_RC_GPIO_WIFI_NRESET 139 -#define IGEP2_RC_GPIO_BT_NRESET 137 - -#define IGEP3_GPIO_LED0_GREEN 54 -#define IGEP3_GPIO_LED0_RED 53 -#define IGEP3_GPIO_LED1_RED 16 -#define IGEP3_GPIO_USBH_NRESET 183 - -#define IGEP_SYSBOOT_MASK 0x1f -#define IGEP_SYSBOOT_NAND 0x0f -#define IGEP_SYSBOOT_ONENAND 0x10 - -/* - * IGEP2 Hardware Revision Table - * - * -------------------------------------------------------------------------- - * | Id. | Hw Rev. | HW0 (28) | WIFI_NPD | WIFI_NRESET | BT_NRESET | - * -------------------------------------------------------------------------- - * | 0 | B | high | gpio94 | gpio95 | - | - * | 0 | B/C (B-compatible) | high | gpio94 | gpio95 | gpio137 | - * | 1 | C | low | gpio138 | gpio139 | gpio137 | - * -------------------------------------------------------------------------- - */ - -#define IGEP2_BOARD_HWREV_B 0 -#define IGEP2_BOARD_HWREV_C 1 -#define IGEP3_BOARD_HWREV 2 - -static u8 hwrev; - -static void __init igep2_get_revision(void) -{ - u8 ret; - - if (machine_is_igep0030()) { - hwrev = IGEP3_BOARD_HWREV; - return; - } - - omap_mux_init_gpio(IGEP2_GPIO_LED1_RED, OMAP_PIN_INPUT); - - if (gpio_request_one(IGEP2_GPIO_LED1_RED, GPIOF_IN, "GPIO_HW0_REV")) { - pr_warning("IGEP2: Could not obtain gpio GPIO_HW0_REV\n"); - pr_err("IGEP2: Unknown Hardware Revision\n"); - return; - } - - ret = gpio_get_value(IGEP2_GPIO_LED1_RED); - if (ret == 0) { - pr_info("IGEP2: Hardware Revision C (B-NON compatible)\n"); - hwrev = IGEP2_BOARD_HWREV_C; - } else if (ret == 1) { - pr_info("IGEP2: Hardware Revision B/C (B compatible)\n"); - hwrev = IGEP2_BOARD_HWREV_B; - } else { - pr_err("IGEP2: Unknown Hardware Revision\n"); - hwrev = -1; - } - - gpio_free(IGEP2_GPIO_LED1_RED); -} - -#if defined(CONFIG_MTD_ONENAND_OMAP2) || \ - defined(CONFIG_MTD_ONENAND_OMAP2_MODULE) || \ - defined(CONFIG_MTD_NAND_OMAP2) || \ - defined(CONFIG_MTD_NAND_OMAP2_MODULE) - -#define ONENAND_MAP 0x20000000 - -/* NAND04GR4E1A ( x2 Flash built-in COMBO POP MEMORY ) - * Since the device is equipped with two DataRAMs, and two-plane NAND - * Flash memory array, these two component enables simultaneous program - * of 4KiB. Plane1 has only even blocks such as block0, block2, block4 - * while Plane2 has only odd blocks such as block1, block3, block5. - * So MTD regards it as 4KiB page size and 256KiB block size 64*(2*2048) - */ - -static struct mtd_partition igep_flash_partitions[] = { - { - .name = "X-Loader", - .offset = 0, - .size = 2 * (64*(2*2048)) - }, - { - .name = "U-Boot", - .offset = MTDPART_OFS_APPEND, - .size = 6 * (64*(2*2048)), - }, - { - .name = "Environment", - .offset = MTDPART_OFS_APPEND, - .size = 2 * (64*(2*2048)), - }, - { - .name = "Kernel", - .offset = MTDPART_OFS_APPEND, - .size = 12 * (64*(2*2048)), - }, - { - .name = "File System", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - }, -}; - -static inline u32 igep_get_sysboot_value(void) -{ - return omap_ctrl_readl(OMAP343X_CONTROL_STATUS) & IGEP_SYSBOOT_MASK; -} - -static void __init igep_flash_init(void) -{ - u32 mux; - mux = igep_get_sysboot_value(); - - if (mux == IGEP_SYSBOOT_NAND) { - pr_info("IGEP: initializing NAND memory device\n"); - board_nand_init(igep_flash_partitions, - ARRAY_SIZE(igep_flash_partitions), - 0, NAND_BUSWIDTH_16, nand_default_timings); - } else if (mux == IGEP_SYSBOOT_ONENAND) { - pr_info("IGEP: initializing OneNAND memory device\n"); - board_onenand_init(igep_flash_partitions, - ARRAY_SIZE(igep_flash_partitions), 0); - } else { - pr_err("IGEP: Flash: unsupported sysboot sequence found\n"); - } -} - -#else -static void __init igep_flash_init(void) {} -#endif - -#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) - -#include <linux/smsc911x.h> -#include "gpmc-smsc911x.h" - -static struct omap_smsc911x_platform_data smsc911x_cfg = { - .cs = IGEP2_SMSC911X_CS, - .gpio_irq = IGEP2_SMSC911X_GPIO, - .gpio_reset = -EINVAL, - .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS, -}; - -static inline void __init igep2_init_smsc911x(void) -{ - gpmc_smsc911x_init(&smsc911x_cfg); -} - -#else -static inline void __init igep2_init_smsc911x(void) { } -#endif - -static struct regulator_consumer_supply igep_vmmc1_supply[] = { - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), -}; - -/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */ -static struct regulator_init_data igep_vmmc1 = { - .constraints = { - .min_uV = 1850000, - .max_uV = 3150000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(igep_vmmc1_supply), - .consumer_supplies = igep_vmmc1_supply, -}; - -static struct regulator_consumer_supply igep_vio_supply[] = { - REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1"), -}; - -static struct regulator_init_data igep_vio = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = 1, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(igep_vio_supply), - .consumer_supplies = igep_vio_supply, -}; - -static struct regulator_consumer_supply igep_vmmc2_supply[] = { - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"), -}; - -static struct regulator_init_data igep_vmmc2 = { - .constraints = { - .valid_modes_mask = REGULATOR_MODE_NORMAL, - .always_on = 1, - }, - .num_consumer_supplies = ARRAY_SIZE(igep_vmmc2_supply), - .consumer_supplies = igep_vmmc2_supply, -}; - -static struct fixed_voltage_config igep_vwlan = { - .supply_name = "vwlan", - .microvolts = 3300000, - .gpio = -EINVAL, - .enabled_at_boot = 1, - .init_data = &igep_vmmc2, -}; - -static struct platform_device igep_vwlan_device = { - .name = "reg-fixed-voltage", - .id = 0, - .dev = { - .platform_data = &igep_vwlan, - }, -}; - -static struct omap2_hsmmc_info mmc[] = { - { - .mmc = 1, - .caps = MMC_CAP_4_BIT_DATA, - .gpio_cd = -EINVAL, - .gpio_wp = -EINVAL, - .deferred = true, - }, -#if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE) - { - .mmc = 2, - .caps = MMC_CAP_4_BIT_DATA, - .gpio_cd = -EINVAL, - .gpio_wp = -EINVAL, - }, -#endif - {} /* Terminator */ -}; - -#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) -#include <linux/leds.h> - -static struct gpio_led igep_gpio_leds[] = { - [0] = { - .name = "omap3:red:user0", - .default_state = 0, - }, - [1] = { - .name = "omap3:green:boot", - .default_state = 1, - }, - [2] = { - .name = "omap3:red:user1", - .default_state = 0, - }, - [3] = { - .name = "omap3:green:user1", - .default_state = 0, - .gpio = -EINVAL, /* gets replaced */ - .active_low = 1, - }, -}; - -static struct gpio_led_platform_data igep_led_pdata = { - .leds = igep_gpio_leds, - .num_leds = ARRAY_SIZE(igep_gpio_leds), -}; - -static struct platform_device igep_led_device = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &igep_led_pdata, - }, -}; - -static void __init igep_leds_init(void) -{ - if (machine_is_igep0020()) { - igep_gpio_leds[0].gpio = IGEP2_GPIO_LED0_RED; - igep_gpio_leds[1].gpio = IGEP2_GPIO_LED0_GREEN; - igep_gpio_leds[2].gpio = IGEP2_GPIO_LED1_RED; - } else { - igep_gpio_leds[0].gpio = IGEP3_GPIO_LED0_RED; - igep_gpio_leds[1].gpio = IGEP3_GPIO_LED0_GREEN; - igep_gpio_leds[2].gpio = IGEP3_GPIO_LED1_RED; - } - - platform_device_register(&igep_led_device); -} - -#else -static struct gpio igep_gpio_leds[] __initdata = { - { -EINVAL, GPIOF_OUT_INIT_LOW, "gpio-led:red:d0" }, - { -EINVAL, GPIOF_OUT_INIT_LOW, "gpio-led:green:d0" }, - { -EINVAL, GPIOF_OUT_INIT_LOW, "gpio-led:red:d1" }, -}; - -static inline void igep_leds_init(void) -{ - int i; - - if (machine_is_igep0020()) { - igep_gpio_leds[0].gpio = IGEP2_GPIO_LED0_RED; - igep_gpio_leds[1].gpio = IGEP2_GPIO_LED0_GREEN; - igep_gpio_leds[2].gpio = IGEP2_GPIO_LED1_RED; - } else { - igep_gpio_leds[0].gpio = IGEP3_GPIO_LED0_RED; - igep_gpio_leds[1].gpio = IGEP3_GPIO_LED0_GREEN; - igep_gpio_leds[2].gpio = IGEP3_GPIO_LED1_RED; - } - - if (gpio_request_array(igep_gpio_leds, ARRAY_SIZE(igep_gpio_leds))) { - pr_warning("IGEP v2: Could not obtain leds gpios\n"); - return; - } - - for (i = 0; i < ARRAY_SIZE(igep_gpio_leds); i++) - gpio_export(igep_gpio_leds[i].gpio, 0); -} -#endif - -static struct gpio igep2_twl_gpios[] = { - { -EINVAL, GPIOF_IN, "GPIO_EHCI_NOC" }, - { -EINVAL, GPIOF_OUT_INIT_LOW, "GPIO_USBH_CPEN" }, -}; - -static int igep_twl_gpio_setup(struct device *dev, - unsigned gpio, unsigned ngpio) -{ - int ret; - - /* gpio + 0 is "mmc0_cd" (input/IRQ) */ - mmc[0].gpio_cd = gpio + 0; - omap_hsmmc_late_init(mmc); - - /* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */ -#if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE) - ret = gpio_request_one(gpio + TWL4030_GPIO_MAX + 1, GPIOF_OUT_INIT_HIGH, - "gpio-led:green:d1"); - if (ret == 0) - gpio_export(gpio + TWL4030_GPIO_MAX + 1, 0); - else - pr_warning("IGEP: Could not obtain gpio GPIO_LED1_GREEN\n"); -#else - igep_gpio_leds[3].gpio = gpio + TWL4030_GPIO_MAX + 1; -#endif - - if (machine_is_igep0030()) - return 0; - - /* - * REVISIT: need ehci-omap hooks for external VBUS - * power switch and overcurrent detect - */ - igep2_twl_gpios[0].gpio = gpio + 1; - - /* TWL4030_GPIO_MAX + 0 == ledA, GPIO_USBH_CPEN (out, active low) */ - igep2_twl_gpios[1].gpio = gpio + TWL4030_GPIO_MAX; - - ret = gpio_request_array(igep2_twl_gpios, ARRAY_SIZE(igep2_twl_gpios)); - if (ret < 0) - pr_err("IGEP2: Could not obtain gpio for USBH_CPEN"); - - return 0; -}; - -static struct twl4030_gpio_platform_data igep_twl4030_gpio_pdata = { - .use_leds = true, - .setup = igep_twl_gpio_setup, -}; - -static struct connector_dvi_platform_data omap3stalker_dvi_connector_pdata = { - .name = "dvi", - .source = "tfp410.0", - .i2c_bus_num = 3, -}; - -static struct platform_device omap3stalker_dvi_connector_device = { - .name = "connector-dvi", - .id = 0, - .dev.platform_data = &omap3stalker_dvi_connector_pdata, -}; - -static struct encoder_tfp410_platform_data omap3stalker_tfp410_pdata = { - .name = "tfp410.0", - .source = "dpi.0", - .data_lines = 24, - .power_down_gpio = IGEP2_GPIO_DVI_PUP, -}; - -static struct platform_device omap3stalker_tfp410_device = { - .name = "tfp410", - .id = 0, - .dev.platform_data = &omap3stalker_tfp410_pdata, -}; - -static struct omap_dss_board_info igep2_dss_data = { - .default_display_name = "dvi", -}; - -static struct platform_device *igep_devices[] __initdata = { - &igep_vwlan_device, - &omap3stalker_tfp410_device, - &omap3stalker_dvi_connector_device, -}; - -static int igep2_keymap[] = { - KEY(0, 0, KEY_LEFT), - KEY(0, 1, KEY_RIGHT), - KEY(0, 2, KEY_A), - KEY(0, 3, KEY_B), - KEY(1, 0, KEY_DOWN), - KEY(1, 1, KEY_UP), - KEY(1, 2, KEY_E), - KEY(1, 3, KEY_F), - KEY(2, 0, KEY_ENTER), - KEY(2, 1, KEY_I), - KEY(2, 2, KEY_J), - KEY(2, 3, KEY_K), - KEY(3, 0, KEY_M), - KEY(3, 1, KEY_N), - KEY(3, 2, KEY_O), - KEY(3, 3, KEY_P) -}; - -static struct matrix_keymap_data igep2_keymap_data = { - .keymap = igep2_keymap, - .keymap_size = ARRAY_SIZE(igep2_keymap), -}; - -static struct twl4030_keypad_data igep2_keypad_pdata = { - .keymap_data = &igep2_keymap_data, - .rows = 4, - .cols = 4, - .rep = 1, -}; - -static struct twl4030_platform_data igep_twldata = { - /* platform_data for children goes here */ - .gpio = &igep_twl4030_gpio_pdata, - .vmmc1 = &igep_vmmc1, - .vio = &igep_vio, -}; - -static struct i2c_board_info __initdata igep2_i2c3_boardinfo[] = { - { - I2C_BOARD_INFO("eeprom", 0x50), - }, -}; - -static void __init igep_i2c_init(void) -{ - int ret; - - omap3_pmic_get_config(&igep_twldata, TWL_COMMON_PDATA_USB, - TWL_COMMON_REGULATOR_VPLL2); - igep_twldata.vpll2->constraints.apply_uV = true; - igep_twldata.vpll2->constraints.name = "VDVI"; - - if (machine_is_igep0020()) { - /* - * Bus 3 is attached to the DVI port where devices like the - * pico DLP projector don't work reliably with 400kHz - */ - ret = omap_register_i2c_bus(3, 100, igep2_i2c3_boardinfo, - ARRAY_SIZE(igep2_i2c3_boardinfo)); - if (ret) - pr_warning("IGEP2: Could not register I2C3 bus (%d)\n", ret); - - igep_twldata.keypad = &igep2_keypad_pdata; - /* Get common pmic data */ - omap3_pmic_get_config(&igep_twldata, TWL_COMMON_PDATA_AUDIO, 0); - } - - omap3_pmic_init("twl4030", &igep_twldata); -} - -static struct usbhs_phy_data igep2_phy_data[] __initdata = { - { - .port = 1, - .reset_gpio = IGEP2_GPIO_USBH_NRESET, - .vcc_gpio = -EINVAL, - }, -}; - -static struct usbhs_phy_data igep3_phy_data[] __initdata = { - { - .port = 2, - .reset_gpio = IGEP3_GPIO_USBH_NRESET, - .vcc_gpio = -EINVAL, - }, -}; - -static struct usbhs_omap_platform_data igep2_usbhs_bdata __initdata = { - .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, -}; - -static struct usbhs_omap_platform_data igep3_usbhs_bdata __initdata = { - .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, -}; - -#ifdef CONFIG_OMAP_MUX -static struct omap_board_mux board_mux[] __initdata = { - /* Display Sub System */ - OMAP3_MUX(DSS_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_HSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_VSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_ACBIAS, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA8, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA9, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA10, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA11, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA12, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA13, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA14, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA15, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA16, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA17, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA18, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA19, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA20, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA21, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA22, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA23, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - /* TFP410 PanelBus DVI Transmitte (GPIO_170) */ - OMAP3_MUX(HDQ_SIO, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), - /* SMSC9221 LAN Controller ETH IRQ (GPIO_176) */ - OMAP3_MUX(MCSPI1_CS2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), - { .reg_offset = OMAP_MUX_TERMINATOR }, -}; -#endif - -#if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE) -static struct gpio igep_wlan_bt_gpios[] __initdata = { - { -EINVAL, GPIOF_OUT_INIT_HIGH, "GPIO_WIFI_NPD" }, - { -EINVAL, GPIOF_OUT_INIT_HIGH, "GPIO_WIFI_NRESET" }, - { -EINVAL, GPIOF_OUT_INIT_HIGH, "GPIO_BT_NRESET" }, -}; - -static void __init igep_wlan_bt_init(void) -{ - int err; - - /* GPIO's for WLAN-BT combo depends on hardware revision */ - if (hwrev == IGEP2_BOARD_HWREV_B) { - igep_wlan_bt_gpios[0].gpio = IGEP2_RB_GPIO_WIFI_NPD; - igep_wlan_bt_gpios[1].gpio = IGEP2_RB_GPIO_WIFI_NRESET; - igep_wlan_bt_gpios[2].gpio = IGEP2_RB_GPIO_BT_NRESET; - } else if (hwrev == IGEP2_BOARD_HWREV_C || machine_is_igep0030()) { - igep_wlan_bt_gpios[0].gpio = IGEP2_RC_GPIO_WIFI_NPD; - igep_wlan_bt_gpios[1].gpio = IGEP2_RC_GPIO_WIFI_NRESET; - igep_wlan_bt_gpios[2].gpio = IGEP2_RC_GPIO_BT_NRESET; - } else - return; - - /* Make sure that the GPIO pins are muxed correctly */ - omap_mux_init_gpio(igep_wlan_bt_gpios[0].gpio, OMAP_PIN_OUTPUT); - omap_mux_init_gpio(igep_wlan_bt_gpios[1].gpio, OMAP_PIN_OUTPUT); - omap_mux_init_gpio(igep_wlan_bt_gpios[2].gpio, OMAP_PIN_OUTPUT); - - err = gpio_request_array(igep_wlan_bt_gpios, - ARRAY_SIZE(igep_wlan_bt_gpios)); - if (err) { - pr_warning("IGEP2: Could not obtain WIFI/BT gpios\n"); - return; - } - - gpio_export(igep_wlan_bt_gpios[0].gpio, 0); - gpio_export(igep_wlan_bt_gpios[1].gpio, 0); - gpio_export(igep_wlan_bt_gpios[2].gpio, 0); - - gpio_set_value(igep_wlan_bt_gpios[1].gpio, 0); - udelay(10); - gpio_set_value(igep_wlan_bt_gpios[1].gpio, 1); - -} -#else -static inline void __init igep_wlan_bt_init(void) { } -#endif - -static struct regulator_consumer_supply dummy_supplies[] = { - REGULATOR_SUPPLY("vddvario", "smsc911x.0"), - REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), -}; - -static void __init igep_init(void) -{ - regulator_register_fixed(1, dummy_supplies, ARRAY_SIZE(dummy_supplies)); - omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); - - /* Get IGEP2 hardware revision */ - igep2_get_revision(); - - omap_hsmmc_init(mmc); - - /* Register I2C busses and drivers */ - igep_i2c_init(); - platform_add_devices(igep_devices, ARRAY_SIZE(igep_devices)); - omap_serial_init(); - omap_sdrc_init(m65kxxxxam_sdrc_params, - m65kxxxxam_sdrc_params); - usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); - usb_musb_init(NULL); - - igep_flash_init(); - igep_leds_init(); - omap_twl4030_audio_init("igep2", NULL); - - /* - * WLAN-BT combo module from MuRata which has a Marvell WLAN - * (88W8686) + CSR Bluetooth chipset. Uses SDIO interface. - */ - igep_wlan_bt_init(); - - if (machine_is_igep0020()) { - omap_display_init(&igep2_dss_data); - igep2_init_smsc911x(); - usbhs_init_phys(igep2_phy_data, ARRAY_SIZE(igep2_phy_data)); - usbhs_init(&igep2_usbhs_bdata); - } else { - usbhs_init_phys(igep3_phy_data, ARRAY_SIZE(igep3_phy_data)); - usbhs_init(&igep3_usbhs_bdata); - } -} - -MACHINE_START(IGEP0020, "IGEP v2 board") - .atag_offset = 0x100, - .reserve = omap_reserve, - .map_io = omap3_map_io, - .init_early = omap35xx_init_early, - .init_irq = omap3_init_irq, - .handle_irq = omap3_intc_handle_irq, - .init_machine = igep_init, - .init_late = omap35xx_init_late, - .init_time = omap3_sync32k_timer_init, - .restart = omap3xxx_restart, -MACHINE_END - -MACHINE_START(IGEP0030, "IGEP OMAP3 module") - .atag_offset = 0x100, - .reserve = omap_reserve, - .map_io = omap3_map_io, - .init_early = omap35xx_init_early, - .init_irq = omap3_init_irq, - .handle_irq = omap3_intc_handle_irq, - .init_machine = igep_init, - .init_late = omap35xx_init_late, - .init_time = omap3_sync32k_timer_init, - .restart = omap3xxx_restart, -MACHINE_END diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index dd8da2c5399..4ec8d82b049 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -36,7 +36,6 @@ #include <asm/mach/map.h> #include "common.h" -#include "board-zoom.h" #include "gpmc.h" #include "gpmc-smsc911x.h" @@ -406,7 +405,7 @@ static void __init omap_ldp_init(void) usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); usb_musb_init(NULL); board_nand_init(ldp_nand_partitions, ARRAY_SIZE(ldp_nand_partitions), - ZOOM_NAND_CS, 0, nand_default_timings); + 0, 0, nand_default_timings); omap_hsmmc_init(mmc); ldp_display_init(); diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index f26918467ef..8b9cd0690ce 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -289,18 +289,12 @@ static struct regulator_consumer_supply beagle_vsim_supply[] = { static struct gpio_led gpio_leds[]; -/* PHY's VCC regulator might be added later, so flag that we need it */ -static struct usb_phy_gen_xceiv_platform_data hsusb2_phy_data = { - .needs_vcc = true, -}; - static struct usbhs_phy_data phy_data[] = { { .port = 2, .reset_gpio = 147, .vcc_gpio = -1, /* updated in beagle_twl_gpio_setup */ .vcc_polarity = 1, /* updated in beagle_twl_gpio_setup */ - .platform_data = &hsusb2_phy_data, }, }; diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c deleted file mode 100644 index 18143873346..00000000000 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ /dev/null @@ -1,756 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/board-omap3evm.c - * - * Copyright (C) 2008 Texas Instruments - * - * Modified from mach-omap2/board-3430sdp.c - * - * Initial code: Syed Mohammed Khasim - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/gpio.h> -#include <linux/input.h> -#include <linux/input/matrix_keypad.h> -#include <linux/leds.h> -#include <linux/interrupt.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/nand.h> - -#include <linux/spi/spi.h> -#include <linux/spi/ads7846.h> -#include <linux/i2c/twl.h> -#include <linux/usb/otg.h> -#include <linux/usb/musb.h> -#include <linux/usb/usb_phy_gen_xceiv.h> -#include <linux/smsc911x.h> - -#include <linux/wl12xx.h> -#include <linux/regulator/fixed.h> -#include <linux/regulator/machine.h> -#include <linux/mmc/host.h> -#include <linux/export.h> -#include <linux/usb/phy.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include <linux/platform_data/mtd-nand-omap2.h> -#include "common.h" -#include <linux/platform_data/spi-omap2-mcspi.h> -#include <video/omapdss.h> -#include <video/omap-panel-data.h> - -#include "soc.h" -#include "mux.h" -#include "sdram-micron-mt46h32m32lf-6.h" -#include "hsmmc.h" -#include "common-board-devices.h" -#include "board-flash.h" - -#define NAND_CS 0 - -#define OMAP3_EVM_TS_GPIO 175 -#define OMAP3_EVM_EHCI_VBUS 22 -#define OMAP3_EVM_EHCI_SELECT 61 - -#define OMAP3EVM_ETHR_START 0x2c000000 -#define OMAP3EVM_ETHR_SIZE 1024 -#define OMAP3EVM_ETHR_ID_REV 0x50 -#define OMAP3EVM_ETHR_GPIO_IRQ 176 -#define OMAP3EVM_SMSC911X_CS 5 -/* - * Eth Reset signal - * 64 = Generation 1 (<=RevD) - * 7 = Generation 2 (>=RevE) - */ -#define OMAP3EVM_GEN1_ETHR_GPIO_RST 64 -#define OMAP3EVM_GEN2_ETHR_GPIO_RST 7 - -/* - * OMAP35x EVM revision - * Run time detection of EVM revision is done by reading Ethernet - * PHY ID - - * GEN_1 = 0x01150000 - * GEN_2 = 0x92200000 - */ -enum { - OMAP3EVM_BOARD_GEN_1 = 0, /* EVM Rev between A - D */ - OMAP3EVM_BOARD_GEN_2, /* EVM Rev >= Rev E */ -}; - -static u8 omap3_evm_version; - -static u8 get_omap3_evm_rev(void) -{ - return omap3_evm_version; -} - -static void __init omap3_evm_get_revision(void) -{ - void __iomem *ioaddr; - unsigned int smsc_id; - - /* Ethernet PHY ID is stored at ID_REV register */ - ioaddr = ioremap_nocache(OMAP3EVM_ETHR_START, SZ_1K); - if (!ioaddr) - return; - smsc_id = readl(ioaddr + OMAP3EVM_ETHR_ID_REV) & 0xFFFF0000; - iounmap(ioaddr); - - switch (smsc_id) { - /*SMSC9115 chipset*/ - case 0x01150000: - omap3_evm_version = OMAP3EVM_BOARD_GEN_1; - break; - /*SMSC 9220 chipset*/ - case 0x92200000: - default: - omap3_evm_version = OMAP3EVM_BOARD_GEN_2; - } -} - -#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) -#include "gpmc-smsc911x.h" - -static struct omap_smsc911x_platform_data smsc911x_cfg = { - .cs = OMAP3EVM_SMSC911X_CS, - .gpio_irq = OMAP3EVM_ETHR_GPIO_IRQ, - .gpio_reset = -EINVAL, - .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS, -}; - -static inline void __init omap3evm_init_smsc911x(void) -{ - /* Configure ethernet controller reset gpio */ - if (cpu_is_omap3430()) { - if (get_omap3_evm_rev() == OMAP3EVM_BOARD_GEN_1) - smsc911x_cfg.gpio_reset = OMAP3EVM_GEN1_ETHR_GPIO_RST; - else - smsc911x_cfg.gpio_reset = OMAP3EVM_GEN2_ETHR_GPIO_RST; - } - - gpmc_smsc911x_init(&smsc911x_cfg); -} - -#else -static inline void __init omap3evm_init_smsc911x(void) { return; } -#endif - -/* - * OMAP3EVM LCD Panel control signals - */ -#define OMAP3EVM_LCD_PANEL_LR 2 -#define OMAP3EVM_LCD_PANEL_UD 3 -#define OMAP3EVM_LCD_PANEL_INI 152 -#define OMAP3EVM_LCD_PANEL_QVGA 154 -#define OMAP3EVM_LCD_PANEL_RESB 155 - -#define OMAP3EVM_LCD_PANEL_ENVDD 153 -#define OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO 210 - -/* - * OMAP3EVM DVI control signals - */ -#define OMAP3EVM_DVI_PANEL_EN_GPIO 199 - -#ifdef CONFIG_BROKEN -static void __init omap3_evm_display_init(void) -{ - int r; - - r = gpio_request_one(OMAP3EVM_LCD_PANEL_ENVDD, GPIOF_OUT_INIT_LOW, - "lcd_panel_envdd"); - if (r) - pr_err("failed to get lcd_panel_envdd GPIO\n"); - - r = gpio_request_one(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, - GPIOF_OUT_INIT_LOW, "lcd_panel_bklight"); - if (r) - pr_err("failed to get lcd_panel_bklight GPIO\n"); - - if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) - gpio_set_value_cansleep(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 0); - else - gpio_set_value_cansleep(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 1); -} -#endif - -static struct panel_sharp_ls037v7dw01_platform_data omap3_evm_lcd_pdata = { - .name = "lcd", - .source = "dpi.0", - - .data_lines = 18, - - .resb_gpio = OMAP3EVM_LCD_PANEL_RESB, - .ini_gpio = OMAP3EVM_LCD_PANEL_INI, - .mo_gpio = OMAP3EVM_LCD_PANEL_QVGA, - .lr_gpio = OMAP3EVM_LCD_PANEL_LR, - .ud_gpio = OMAP3EVM_LCD_PANEL_UD, -}; - -static struct platform_device omap3_evm_lcd_device = { - .name = "panel-sharp-ls037v7dw01", - .id = 0, - .dev.platform_data = &omap3_evm_lcd_pdata, -}; - -static struct connector_dvi_platform_data omap3_evm_dvi_connector_pdata = { - .name = "dvi", - .source = "tfp410.0", - .i2c_bus_num = -1, -}; - -static struct platform_device omap3_evm_dvi_connector_device = { - .name = "connector-dvi", - .id = 0, - .dev.platform_data = &omap3_evm_dvi_connector_pdata, -}; - -static struct encoder_tfp410_platform_data omap3_evm_tfp410_pdata = { - .name = "tfp410.0", - .source = "dpi.0", - .data_lines = 24, - .power_down_gpio = OMAP3EVM_DVI_PANEL_EN_GPIO, -}; - -static struct platform_device omap3_evm_tfp410_device = { - .name = "tfp410", - .id = 0, - .dev.platform_data = &omap3_evm_tfp410_pdata, -}; - -static struct connector_atv_platform_data omap3_evm_tv_pdata = { - .name = "tv", - .source = "venc.0", - .connector_type = OMAP_DSS_VENC_TYPE_SVIDEO, - .invert_polarity = false, -}; - -static struct platform_device omap3_evm_tv_connector_device = { - .name = "connector-analog-tv", - .id = 0, - .dev.platform_data = &omap3_evm_tv_pdata, -}; - -static struct omap_dss_board_info omap3_evm_dss_data = { - .default_display_name = "lcd", -}; - -static struct regulator_consumer_supply omap3evm_vmmc1_supply[] = { - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), -}; - -static struct regulator_consumer_supply omap3evm_vsim_supply[] = { - REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"), -}; - -/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ -static struct regulator_init_data omap3evm_vmmc1 = { - .constraints = { - .min_uV = 1850000, - .max_uV = 3150000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(omap3evm_vmmc1_supply), - .consumer_supplies = omap3evm_vmmc1_supply, -}; - -/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */ -static struct regulator_init_data omap3evm_vsim = { - .constraints = { - .min_uV = 1800000, - .max_uV = 3000000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(omap3evm_vsim_supply), - .consumer_supplies = omap3evm_vsim_supply, -}; - -static struct omap2_hsmmc_info mmc[] = { - { - .mmc = 1, - .caps = MMC_CAP_4_BIT_DATA, - .gpio_cd = -EINVAL, - .gpio_wp = 63, - .deferred = true, - }, -#ifdef CONFIG_WILINK_PLATFORM_DATA - { - .name = "wl1271", - .mmc = 2, - .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD, - .gpio_wp = -EINVAL, - .gpio_cd = -EINVAL, - .nonremovable = true, - }, -#endif - {} /* Terminator */ -}; - -static struct gpio_led gpio_leds[] = { - { - .name = "omap3evm::ledb", - /* normally not visible (board underside) */ - .default_trigger = "default-on", - .gpio = -EINVAL, /* gets replaced */ - .active_low = true, - }, -}; - -static struct gpio_led_platform_data gpio_led_info = { - .leds = gpio_leds, - .num_leds = ARRAY_SIZE(gpio_leds), -}; - -static struct platform_device leds_gpio = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &gpio_led_info, - }, -}; - - -static int omap3evm_twl_gpio_setup(struct device *dev, - unsigned gpio, unsigned ngpio) -{ - int r, lcd_bl_en; - - /* gpio + 0 is "mmc0_cd" (input/IRQ) */ - mmc[0].gpio_cd = gpio + 0; - omap_hsmmc_late_init(mmc); - - /* - * Most GPIOs are for USB OTG. Some are mostly sent to - * the P2 connector; notably LEDA for the LCD backlight. - */ - - /* TWL4030_GPIO_MAX + 0 == ledA, LCD Backlight control */ - lcd_bl_en = get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2 ? - GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW; - r = gpio_request_one(gpio + TWL4030_GPIO_MAX, lcd_bl_en, "EN_LCD_BKL"); - if (r) - printk(KERN_ERR "failed to get/set lcd_bkl gpio\n"); - - /* gpio + 7 == DVI Enable */ - gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "EN_DVI"); - - /* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */ - gpio_leds[0].gpio = gpio + TWL4030_GPIO_MAX + 1; - - platform_device_register(&leds_gpio); - - /* Enable VBUS switch by setting TWL4030.GPIO2DIR as output - * for starting USB tranceiver - */ -#ifdef CONFIG_TWL4030_CORE - if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) { - u8 val; - - twl_i2c_read_u8(TWL4030_MODULE_GPIO, &val, REG_GPIODATADIR1); - val |= 0x04; /* TWL4030.GPIO2DIR BIT at GPIODATADIR1(0x9B) */ - twl_i2c_write_u8(TWL4030_MODULE_GPIO, val, REG_GPIODATADIR1); - } -#endif - - return 0; -} - -static struct twl4030_gpio_platform_data omap3evm_gpio_data = { - .use_leds = true, - .setup = omap3evm_twl_gpio_setup, -}; - -static uint32_t board_keymap[] = { - KEY(0, 0, KEY_LEFT), - KEY(0, 1, KEY_DOWN), - KEY(0, 2, KEY_ENTER), - KEY(0, 3, KEY_M), - - KEY(1, 0, KEY_RIGHT), - KEY(1, 1, KEY_UP), - KEY(1, 2, KEY_I), - KEY(1, 3, KEY_N), - - KEY(2, 0, KEY_A), - KEY(2, 1, KEY_E), - KEY(2, 2, KEY_J), - KEY(2, 3, KEY_O), - - KEY(3, 0, KEY_B), - KEY(3, 1, KEY_F), - KEY(3, 2, KEY_K), - KEY(3, 3, KEY_P) -}; - -static struct matrix_keymap_data board_map_data = { - .keymap = board_keymap, - .keymap_size = ARRAY_SIZE(board_keymap), -}; - -static struct twl4030_keypad_data omap3evm_kp_data = { - .keymap_data = &board_map_data, - .rows = 4, - .cols = 4, - .rep = 1, -}; - -/* ads7846 on SPI */ -static struct regulator_consumer_supply omap3evm_vio_supply[] = { - REGULATOR_SUPPLY("vcc", "spi1.0"), -}; - -/* VIO for ads7846 */ -static struct regulator_init_data omap3evm_vio = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(omap3evm_vio_supply), - .consumer_supplies = omap3evm_vio_supply, -}; - -#ifdef CONFIG_WILINK_PLATFORM_DATA - -#define OMAP3EVM_WLAN_PMENA_GPIO (150) -#define OMAP3EVM_WLAN_IRQ_GPIO (149) - -static struct regulator_consumer_supply omap3evm_vmmc2_supply[] = { - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"), -}; - -/* VMMC2 for driving the WL12xx module */ -static struct regulator_init_data omap3evm_vmmc2 = { - .constraints = { - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(omap3evm_vmmc2_supply), - .consumer_supplies = omap3evm_vmmc2_supply, -}; - -static struct fixed_voltage_config omap3evm_vwlan = { - .supply_name = "vwl1271", - .microvolts = 1800000, /* 1.80V */ - .gpio = OMAP3EVM_WLAN_PMENA_GPIO, - .startup_delay = 70000, /* 70ms */ - .enable_high = 1, - .enabled_at_boot = 0, - .init_data = &omap3evm_vmmc2, -}; - -static struct platform_device omap3evm_wlan_regulator = { - .name = "reg-fixed-voltage", - .id = 1, - .dev = { - .platform_data = &omap3evm_vwlan, - }, -}; - -struct wl12xx_platform_data omap3evm_wlan_data __initdata = { - .board_ref_clock = WL12XX_REFCLOCK_38, /* 38.4 MHz */ -}; -#endif - -/* VAUX2 for USB */ -static struct regulator_consumer_supply omap3evm_vaux2_supplies[] = { - REGULATOR_SUPPLY("VDD_CSIPHY1", "omap3isp"), /* OMAP ISP */ - REGULATOR_SUPPLY("VDD_CSIPHY2", "omap3isp"), /* OMAP ISP */ - REGULATOR_SUPPLY("vcc", "usb_phy_gen_xceiv.2"), /* hsusb port 2 */ - REGULATOR_SUPPLY("vaux2", NULL), -}; - -static struct regulator_init_data omap3evm_vaux2 = { - .constraints = { - .min_uV = 2800000, - .max_uV = 2800000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(omap3evm_vaux2_supplies), - .consumer_supplies = omap3evm_vaux2_supplies, -}; - -static struct twl4030_platform_data omap3evm_twldata = { - /* platform_data for children goes here */ - .keypad = &omap3evm_kp_data, - .gpio = &omap3evm_gpio_data, - .vio = &omap3evm_vio, - .vmmc1 = &omap3evm_vmmc1, - .vsim = &omap3evm_vsim, -}; - -static int __init omap3_evm_i2c_init(void) -{ - omap3_pmic_get_config(&omap3evm_twldata, - TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC | - TWL_COMMON_PDATA_AUDIO, - TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2); - - omap3evm_twldata.vdac->constraints.apply_uV = true; - omap3evm_twldata.vpll2->constraints.apply_uV = true; - - omap3_pmic_init("twl4030", &omap3evm_twldata); - omap_register_i2c_bus(2, 400, NULL, 0); - omap_register_i2c_bus(3, 400, NULL, 0); - return 0; -} - -static struct usbhs_phy_data phy_data[] __initdata = { - { - .port = 2, - .reset_gpio = -1, /* set at runtime */ - .vcc_gpio = -EINVAL, - }, -}; - -static struct usbhs_omap_platform_data usbhs_bdata __initdata = { - .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, -}; - -#ifdef CONFIG_OMAP_MUX -static struct omap_board_mux omap35x_board_mux[] __initdata = { - OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP | - OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW | - OMAP_PIN_OFF_WAKEUPENABLE), - OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP | - OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW | - OMAP_PIN_OFF_WAKEUPENABLE), - OMAP3_MUX(SYS_BOOT5, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP | - OMAP_PIN_OFF_NONE), - OMAP3_MUX(GPMC_WAIT2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP | - OMAP_PIN_OFF_NONE), -#ifdef CONFIG_WILINK_PLATFORM_DATA - /* WLAN IRQ - GPIO 149 */ - OMAP3_MUX(UART1_RTS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), - - /* WLAN POWER ENABLE - GPIO 150 */ - OMAP3_MUX(UART1_CTS, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), - - /* MMC2 SDIO pin muxes for WL12xx */ - OMAP3_MUX(SDMMC2_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP), - OMAP3_MUX(SDMMC2_CMD, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP), - OMAP3_MUX(SDMMC2_DAT0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP), - OMAP3_MUX(SDMMC2_DAT1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP), - OMAP3_MUX(SDMMC2_DAT2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP), - OMAP3_MUX(SDMMC2_DAT3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP), -#endif - { .reg_offset = OMAP_MUX_TERMINATOR }, -}; - -static struct omap_board_mux omap36x_board_mux[] __initdata = { - OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP | - OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW | - OMAP_PIN_OFF_WAKEUPENABLE), - OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP | - OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW | - OMAP_PIN_OFF_WAKEUPENABLE), - /* AM/DM37x EVM: DSS data bus muxed with sys_boot */ - OMAP3_MUX(DSS_DATA18, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE), - OMAP3_MUX(DSS_DATA19, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE), - OMAP3_MUX(DSS_DATA22, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE), - OMAP3_MUX(DSS_DATA21, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE), - OMAP3_MUX(DSS_DATA22, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE), - OMAP3_MUX(DSS_DATA23, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE), - OMAP3_MUX(SYS_BOOT0, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE), - OMAP3_MUX(SYS_BOOT1, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE), - OMAP3_MUX(SYS_BOOT3, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE), - OMAP3_MUX(SYS_BOOT4, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE), - OMAP3_MUX(SYS_BOOT5, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE), - OMAP3_MUX(SYS_BOOT6, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE), -#ifdef CONFIG_WILINK_PLATFORM_DATA - /* WLAN IRQ - GPIO 149 */ - OMAP3_MUX(UART1_RTS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), - - /* WLAN POWER ENABLE - GPIO 150 */ - OMAP3_MUX(UART1_CTS, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), - - /* MMC2 SDIO pin muxes for WL12xx */ - OMAP3_MUX(SDMMC2_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP), - OMAP3_MUX(SDMMC2_CMD, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP), - OMAP3_MUX(SDMMC2_DAT0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP), - OMAP3_MUX(SDMMC2_DAT1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP), - OMAP3_MUX(SDMMC2_DAT2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP), - OMAP3_MUX(SDMMC2_DAT3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP), -#endif - - { .reg_offset = OMAP_MUX_TERMINATOR }, -}; -#else -#define omap35x_board_mux NULL -#define omap36x_board_mux NULL -#endif - -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, -}; - -static struct gpio omap3_evm_ehci_gpios[] __initdata = { - { OMAP3_EVM_EHCI_VBUS, GPIOF_OUT_INIT_HIGH, "enable EHCI VBUS" }, - { OMAP3_EVM_EHCI_SELECT, GPIOF_OUT_INIT_LOW, "select EHCI port" }, -}; - -static void __init omap3_evm_wl12xx_init(void) -{ -#ifdef CONFIG_WILINK_PLATFORM_DATA - int ret; - - /* WL12xx WLAN Init */ - omap3evm_wlan_data.irq = gpio_to_irq(OMAP3EVM_WLAN_IRQ_GPIO); - ret = wl12xx_set_platform_data(&omap3evm_wlan_data); - if (ret) - pr_err("error setting wl12xx data: %d\n", ret); - ret = platform_device_register(&omap3evm_wlan_regulator); - if (ret) - pr_err("error registering wl12xx device: %d\n", ret); -#endif -} - -static struct regulator_consumer_supply dummy_supplies[] = { - REGULATOR_SUPPLY("vddvario", "smsc911x.0"), - REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), -}; - -static struct mtd_partition omap3evm_nand_partitions[] = { - /* All the partition sizes are listed in terms of NAND block size */ - { - .name = "X-Loader", - .offset = 0, - .size = 4*(SZ_128K), - .mask_flags = MTD_WRITEABLE - }, - { - .name = "U-Boot", - .offset = MTDPART_OFS_APPEND, - .size = 14*(SZ_128K), - .mask_flags = MTD_WRITEABLE - }, - { - .name = "U-Boot Env", - .offset = MTDPART_OFS_APPEND, - .size = 2*(SZ_128K) - }, - { - .name = "Kernel", - .offset = MTDPART_OFS_APPEND, - .size = 40*(SZ_128K) - }, - { - .name = "File system", - .size = MTDPART_SIZ_FULL, - .offset = MTDPART_OFS_APPEND, - }, -}; - -static void __init omap3_evm_init(void) -{ - struct omap_board_mux *obm; - - omap3_evm_get_revision(); - regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); - - obm = (cpu_is_omap3630()) ? omap36x_board_mux : omap35x_board_mux; - omap3_mux_init(obm, OMAP_PACKAGE_CBB); - - omap_mux_init_gpio(63, OMAP_PIN_INPUT); - omap_hsmmc_init(mmc); - - if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) - omap3evm_twldata.vaux2 = &omap3evm_vaux2; - - omap3_evm_i2c_init(); - - omap_display_init(&omap3_evm_dss_data); - platform_device_register(&omap3_evm_lcd_device); - platform_device_register(&omap3_evm_tfp410_device); - platform_device_register(&omap3_evm_dvi_connector_device); - platform_device_register(&omap3_evm_tv_connector_device); - - omap_serial_init(); - omap_sdrc_init(mt46h32m32lf6_sdrc_params, NULL); - - /* OMAP3EVM uses ISP1504 phy and so register nop transceiver */ - usb_nop_xceiv_register(); - - if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) { - /* enable EHCI VBUS using GPIO22 */ - omap_mux_init_gpio(OMAP3_EVM_EHCI_VBUS, OMAP_PIN_INPUT_PULLUP); - /* Select EHCI port on main board */ - omap_mux_init_gpio(OMAP3_EVM_EHCI_SELECT, - OMAP_PIN_INPUT_PULLUP); - gpio_request_array(omap3_evm_ehci_gpios, - ARRAY_SIZE(omap3_evm_ehci_gpios)); - - /* setup EHCI phy reset config */ - omap_mux_init_gpio(21, OMAP_PIN_INPUT_PULLUP); - phy_data[0].reset_gpio = 21; - - /* EVM REV >= E can supply 500mA with EXTVBUS programming */ - musb_board_data.power = 500; - musb_board_data.extvbus = 1; - } else { - /* setup EHCI phy reset on MDC */ - omap_mux_init_gpio(135, OMAP_PIN_OUTPUT); - phy_data[0].reset_gpio = 135; - } - usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); - usb_musb_init(&musb_board_data); - - usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); - usbhs_init(&usbhs_bdata); - board_nand_init(omap3evm_nand_partitions, - ARRAY_SIZE(omap3evm_nand_partitions), NAND_CS, - NAND_BUSWIDTH_16, NULL); - - omap_ads7846_init(1, OMAP3_EVM_TS_GPIO, 310, NULL); - omap3evm_init_smsc911x(); -#ifdef CONFIG_BROKEN - omap3_evm_display_init(); -#endif - omap3_evm_wl12xx_init(); - omap_twl4030_audio_init("omap3evm", NULL); -} - -MACHINE_START(OMAP3EVM, "OMAP3 EVM") - /* Maintainer: Syed Mohammed Khasim - Texas Instruments */ - .atag_offset = 0x100, - .reserve = omap_reserve, - .map_io = omap3_map_io, - .init_early = omap35xx_init_early, - .init_irq = omap3_init_irq, - .handle_irq = omap3_intc_handle_irq, - .init_machine = omap3_evm_init, - .init_late = omap35xx_init_late, - .init_time = omap3_sync32k_timer_init, - .restart = omap3xxx_restart, -MACHINE_END diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c deleted file mode 100644 index 345e8c4b873..00000000000 --- a/arch/arm/mach-omap2/board-rm680.c +++ /dev/null @@ -1,167 +0,0 @@ -/* - * Board support file for Nokia N950 (RM-680) / N9 (RM-696). - * - * Copyright (C) 2010 Nokia - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/io.h> -#include <linux/i2c.h> -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/i2c/twl.h> -#include <linux/platform_device.h> -#include <linux/regulator/fixed.h> -#include <linux/regulator/machine.h> -#include <linux/regulator/consumer.h> -#include <linux/platform_data/mtd-onenand-omap2.h> -#include <linux/usb/phy.h> - -#include <asm/mach/arch.h> -#include <asm/mach-types.h> - -#include "common.h" -#include "mux.h" -#include "gpmc.h" -#include "mmc.h" -#include "hsmmc.h" -#include "sdram-nokia.h" -#include "common-board-devices.h" -#include "gpmc-onenand.h" - -static struct regulator_consumer_supply rm680_vemmc_consumers[] = { - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"), -}; - -/* Fixed regulator for internal eMMC */ -static struct regulator_init_data rm680_vemmc = { - .constraints = { - .name = "rm680_vemmc", - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_STATUS - | REGULATOR_CHANGE_MODE, - }, - .num_consumer_supplies = ARRAY_SIZE(rm680_vemmc_consumers), - .consumer_supplies = rm680_vemmc_consumers, -}; - -static struct fixed_voltage_config rm680_vemmc_config = { - .supply_name = "VEMMC", - .microvolts = 2900000, - .gpio = 157, - .startup_delay = 150, - .enable_high = 1, - .init_data = &rm680_vemmc, -}; - -static struct platform_device rm680_vemmc_device = { - .name = "reg-fixed-voltage", - .dev = { - .platform_data = &rm680_vemmc_config, - }, -}; - -static struct platform_device *rm680_peripherals_devices[] __initdata = { - &rm680_vemmc_device, -}; - -/* TWL */ -static struct twl4030_gpio_platform_data rm680_gpio_data = { - .pullups = BIT(0), - .pulldowns = BIT(1) | BIT(2) | BIT(8) | BIT(15), -}; - -static struct twl4030_platform_data rm680_twl_data = { - .gpio = &rm680_gpio_data, - /* add rest of the children here */ -}; - -static void __init rm680_i2c_init(void) -{ - omap3_pmic_get_config(&rm680_twl_data, TWL_COMMON_PDATA_USB, 0); - omap_pmic_init(1, 2900, "twl5031", 7 + OMAP_INTC_START, &rm680_twl_data); - omap_register_i2c_bus(2, 400, NULL, 0); - omap_register_i2c_bus(3, 400, NULL, 0); -} - -#if defined(CONFIG_MTD_ONENAND_OMAP2) || \ - defined(CONFIG_MTD_ONENAND_OMAP2_MODULE) -static struct omap_onenand_platform_data board_onenand_data[] = { - { - .gpio_irq = 65, - .flags = ONENAND_SYNC_READWRITE, - } -}; -#endif - -/* eMMC */ -static struct omap2_hsmmc_info mmc[] __initdata = { - { - .name = "internal", - .mmc = 2, - .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED, - .gpio_cd = -EINVAL, - .gpio_wp = -EINVAL, - }, - { /* Terminator */ } -}; - -static void __init rm680_peripherals_init(void) -{ - platform_add_devices(rm680_peripherals_devices, - ARRAY_SIZE(rm680_peripherals_devices)); - rm680_i2c_init(); - gpmc_onenand_init(board_onenand_data); - omap_hsmmc_init(mmc); -} - -#ifdef CONFIG_OMAP_MUX -static struct omap_board_mux board_mux[] __initdata = { - { .reg_offset = OMAP_MUX_TERMINATOR }, -}; -#endif - -static void __init rm680_init(void) -{ - struct omap_sdrc_params *sdrc_params; - - omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); - omap_serial_init(); - - sdrc_params = nokia_get_sdram_timings(); - omap_sdrc_init(sdrc_params, sdrc_params); - - usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); - usb_musb_init(NULL); - rm680_peripherals_init(); -} - -MACHINE_START(NOKIA_RM680, "Nokia RM-680 board") - .atag_offset = 0x100, - .reserve = omap_reserve, - .map_io = omap3_map_io, - .init_early = omap3630_init_early, - .init_irq = omap3_init_irq, - .handle_irq = omap3_intc_handle_irq, - .init_machine = rm680_init, - .init_late = omap3630_init_late, - .init_time = omap3_sync32k_timer_init, - .restart = omap3xxx_restart, -MACHINE_END - -MACHINE_START(NOKIA_RM696, "Nokia RM-696 board") - .atag_offset = 0x100, - .reserve = omap_reserve, - .map_io = omap3_map_io, - .init_early = omap3630_init_early, - .init_irq = omap3_init_irq, - .handle_irq = omap3_intc_handle_irq, - .init_machine = rm680_init, - .init_late = omap3630_init_late, - .init_time = omap3_sync32k_timer_init, - .restart = omap3xxx_restart, -MACHINE_END diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index f6fe388af98..5c0d0e12042 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -57,6 +57,8 @@ #include "common-board-devices.h" #include "gpmc.h" #include "gpmc-onenand.h" +#include "soc.h" +#include "omap-secure.h" #define SYSTEM_REV_B_USES_VAUX3 0x1699 #define SYSTEM_REV_S_USES_VAUX3 0x8 @@ -1298,6 +1300,22 @@ static void __init rx51_init_twl4030_hwmon(void) platform_device_register(&madc_hwmon); } +static struct platform_device omap3_rom_rng_device = { + .name = "omap3-rom-rng", + .id = -1, + .dev = { + .platform_data = rx51_secure_rng_call, + }, +}; + +static void __init rx51_init_omap3_rom_rng(void) +{ + if (omap_type() == OMAP2_DEVICE_TYPE_SEC) { + pr_info("RX-51: Registring OMAP3 HWRNG device\n"); + platform_device_register(&omap3_rom_rng_device); + } +} + void __init rx51_peripherals_init(void) { rx51_i2c_init(); @@ -1318,5 +1336,6 @@ void __init rx51_peripherals_init(void) rx51_charger_init(); rx51_init_twl4030_hwmon(); + rx51_init_omap3_rom_rng(); } diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index 7735105561d..db168c9627a 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -2,6 +2,8 @@ * Board support file for Nokia N900 (aka RX-51). * * Copyright (C) 2007, 2008 Nokia + * Copyright (C) 2012 Ivaylo Dimitrov <freemangordon@abv.bg> + * Copyright (C) 2013 Pali Rohár <pali.rohar@gmail.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -31,7 +33,9 @@ #include "mux.h" #include "gpmc.h" #include "pm.h" +#include "soc.h" #include "sdram-nokia.h" +#include "omap-secure.h" #define RX51_GPIO_SLEEP_IND 162 @@ -103,6 +107,14 @@ static void __init rx51_init(void) usb_musb_init(&musb_board_data); rx51_peripherals_init(); + if (omap_type() == OMAP2_DEVICE_TYPE_SEC) { +#ifdef CONFIG_ARM_ERRATA_430973 + pr_info("RX-51: Enabling ARM errata 430973 workaround\n"); + /* set IBE to 1 */ + rx51_secure_update_aux_cr(BIT(6), 0); +#endif + } + /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c deleted file mode 100644 index 42e5f231a79..00000000000 --- a/arch/arm/mach-omap2/board-zoom-debugboard.c +++ /dev/null @@ -1,139 +0,0 @@ -/* - * Copyright (C) 2009 Texas Instruments Inc. - * Mikkel Christensen <mlc@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/gpio.h> -#include <linux/serial_8250.h> -#include <linux/smsc911x.h> -#include <linux/interrupt.h> - -#include <linux/regulator/fixed.h> -#include <linux/regulator/machine.h> - -#include "gpmc.h" -#include "gpmc-smsc911x.h" - -#include "board-zoom.h" - -#include "soc.h" -#include "common.h" - -#define ZOOM_SMSC911X_CS 7 -#define ZOOM_SMSC911X_GPIO 158 -#define ZOOM_QUADUART_CS 3 -#define ZOOM_QUADUART_GPIO 102 -#define ZOOM_QUADUART_RST_GPIO 152 -#define QUART_CLK 1843200 -#define DEBUG_BASE 0x08000000 -#define ZOOM_ETHR_START DEBUG_BASE - -static struct omap_smsc911x_platform_data zoom_smsc911x_cfg = { - .cs = ZOOM_SMSC911X_CS, - .gpio_irq = ZOOM_SMSC911X_GPIO, - .gpio_reset = -EINVAL, - .flags = SMSC911X_USE_32BIT, -}; - -static inline void __init zoom_init_smsc911x(void) -{ - gpmc_smsc911x_init(&zoom_smsc911x_cfg); -} - -static struct plat_serial8250_port serial_platform_data[] = { - { - .mapbase = ZOOM_UART_BASE, - .flags = UPF_BOOT_AUTOCONF|UPF_IOREMAP|UPF_SHARE_IRQ, - .irqflags = IRQF_SHARED | IRQF_TRIGGER_RISING, - .iotype = UPIO_MEM, - .regshift = 1, - .uartclk = QUART_CLK, - }, { - .flags = 0 - } -}; - -static struct platform_device zoom_debugboard_serial_device = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = serial_platform_data, - }, -}; - -static inline void __init zoom_init_quaduart(void) -{ - int quart_cs; - unsigned long cs_mem_base; - int quart_gpio = 0; - - if (gpio_request_one(ZOOM_QUADUART_RST_GPIO, - GPIOF_OUT_INIT_LOW, - "TL16CP754C GPIO") < 0) { - pr_err("Failed to request GPIO%d for TL16CP754C\n", - ZOOM_QUADUART_RST_GPIO); - return; - } - - quart_cs = ZOOM_QUADUART_CS; - - if (gpmc_cs_request(quart_cs, SZ_1M, &cs_mem_base) < 0) { - pr_err("Failed to request GPMC mem for Quad UART(TL16CP754C)\n"); - return; - } - - quart_gpio = ZOOM_QUADUART_GPIO; - - if (gpio_request_one(quart_gpio, GPIOF_IN, "TL16CP754C GPIO") < 0) - printk(KERN_ERR "Failed to request GPIO%d for TL16CP754C\n", - quart_gpio); - - serial_platform_data[0].irq = gpio_to_irq(102); -} - -static inline int omap_zoom_debugboard_detect(void) -{ - int debug_board_detect = 0; - int ret = 1; - - debug_board_detect = ZOOM_SMSC911X_GPIO; - - if (gpio_request_one(debug_board_detect, GPIOF_IN, - "Zoom debug board detect") < 0) { - pr_err("Failed to request GPIO%d for Zoom debug board detect\n", - debug_board_detect); - return 0; - } - - if (!gpio_get_value(debug_board_detect)) { - ret = 0; - } - gpio_free(debug_board_detect); - return ret; -} - -static struct platform_device *zoom_devices[] __initdata = { - &zoom_debugboard_serial_device, -}; - -static struct regulator_consumer_supply dummy_supplies[] = { - REGULATOR_SUPPLY("vddvario", "smsc911x.0"), - REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), -}; - -int __init zoom_debugboard_init(void) -{ - if (!omap_zoom_debugboard_detect()) - return 0; - - regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); - zoom_init_smsc911x(); - zoom_init_quaduart(); - return platform_add_devices(zoom_devices, ARRAY_SIZE(zoom_devices)); -} diff --git a/arch/arm/mach-omap2/board-zoom-display.c b/arch/arm/mach-omap2/board-zoom-display.c deleted file mode 100644 index 3d8ecc1e05b..00000000000 --- a/arch/arm/mach-omap2/board-zoom-display.c +++ /dev/null @@ -1,71 +0,0 @@ -/* - * Copyright (C) 2010 Texas Instruments Inc. - * - * Modified from mach-omap2/board-zoom-peripherals.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/gpio.h> -#include <linux/spi/spi.h> -#include <linux/platform_data/spi-omap2-mcspi.h> -#include <video/omapdss.h> -#include <video/omap-panel-data.h> - -#include "board-zoom.h" -#include "soc.h" -#include "common.h" - -#define LCD_PANEL_RESET_GPIO_PROD 96 -#define LCD_PANEL_RESET_GPIO_PILOT 55 -#define LCD_PANEL_QVGA_GPIO 56 - -static struct panel_nec_nl8048hl11_platform_data zoom_lcd_pdata = { - .name = "lcd", - .source = "dpi.0", - - .data_lines = 24, - - .res_gpio = -1, /* filled in code */ - .qvga_gpio = LCD_PANEL_QVGA_GPIO, -}; - -static struct omap_dss_board_info zoom_dss_data = { - .default_display_name = "lcd", -}; - -static void __init zoom_lcd_panel_init(void) -{ - zoom_lcd_pdata.res_gpio = (omap_rev() > OMAP3430_REV_ES3_0) ? - LCD_PANEL_RESET_GPIO_PROD : - LCD_PANEL_RESET_GPIO_PILOT; -} - -static struct omap2_mcspi_device_config dss_lcd_mcspi_config = { - .turbo_mode = 1, -}; - -static struct spi_board_info nec_8048_spi_board_info[] __initdata = { - [0] = { - .modalias = "panel-nec-nl8048hl11", - .bus_num = 1, - .chip_select = 2, - .max_speed_hz = 375000, - .controller_data = &dss_lcd_mcspi_config, - .platform_data = &zoom_lcd_pdata, - }, -}; - -void __init zoom_display_init(void) -{ - omap_display_init(&zoom_dss_data); - zoom_lcd_panel_init(); - spi_register_board_info(nec_8048_spi_board_info, - ARRAY_SIZE(nec_8048_spi_board_info)); -} - diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c deleted file mode 100644 index a90375d5b2b..00000000000 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ /dev/null @@ -1,360 +0,0 @@ -/* - * Copyright (C) 2009 Texas Instruments Inc. - * - * Modified from mach-omap2/board-zoom2.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/input.h> -#include <linux/input/matrix_keypad.h> -#include <linux/gpio.h> -#include <linux/i2c/twl.h> -#include <linux/regulator/machine.h> -#include <linux/regulator/fixed.h> -#include <linux/wl12xx.h> -#include <linux/mmc/host.h> -#include <linux/platform_data/gpio-omap.h> -#include <linux/platform_data/omap-twl4030.h> -#include <linux/usb/phy.h> -#include <linux/pwm.h> -#include <linux/leds_pwm.h> -#include <linux/pwm_backlight.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include "common.h" - -#include "board-zoom.h" - -#include "mux.h" -#include "hsmmc.h" -#include "common-board-devices.h" - -#define OMAP_ZOOM_WLAN_PMENA_GPIO (101) -#define OMAP_ZOOM_TSC2004_IRQ_GPIO (153) -#define OMAP_ZOOM_WLAN_IRQ_GPIO (162) - -/* Zoom2 has Qwerty keyboard*/ -static uint32_t board_keymap[] = { - KEY(0, 0, KEY_E), - KEY(0, 1, KEY_R), - KEY(0, 2, KEY_T), - KEY(0, 3, KEY_HOME), - KEY(0, 6, KEY_I), - KEY(0, 7, KEY_LEFTSHIFT), - KEY(1, 0, KEY_D), - KEY(1, 1, KEY_F), - KEY(1, 2, KEY_G), - KEY(1, 3, KEY_SEND), - KEY(1, 6, KEY_K), - KEY(1, 7, KEY_ENTER), - KEY(2, 0, KEY_X), - KEY(2, 1, KEY_C), - KEY(2, 2, KEY_V), - KEY(2, 3, KEY_END), - KEY(2, 6, KEY_DOT), - KEY(2, 7, KEY_CAPSLOCK), - KEY(3, 0, KEY_Z), - KEY(3, 1, KEY_KPPLUS), - KEY(3, 2, KEY_B), - KEY(3, 3, KEY_F1), - KEY(3, 6, KEY_O), - KEY(3, 7, KEY_SPACE), - KEY(4, 0, KEY_W), - KEY(4, 1, KEY_Y), - KEY(4, 2, KEY_U), - KEY(4, 3, KEY_F2), - KEY(4, 4, KEY_VOLUMEUP), - KEY(4, 6, KEY_L), - KEY(4, 7, KEY_LEFT), - KEY(5, 0, KEY_S), - KEY(5, 1, KEY_H), - KEY(5, 2, KEY_J), - KEY(5, 3, KEY_F3), - KEY(5, 4, KEY_UNKNOWN), - KEY(5, 5, KEY_VOLUMEDOWN), - KEY(5, 6, KEY_M), - KEY(5, 7, KEY_RIGHT), - KEY(6, 0, KEY_Q), - KEY(6, 1, KEY_A), - KEY(6, 2, KEY_N), - KEY(6, 3, KEY_BACKSPACE), - KEY(6, 6, KEY_P), - KEY(6, 7, KEY_UP), - KEY(7, 0, KEY_PROG1), /*MACRO 1 <User defined> */ - KEY(7, 1, KEY_PROG2), /*MACRO 2 <User defined> */ - KEY(7, 2, KEY_PROG3), /*MACRO 3 <User defined> */ - KEY(7, 3, KEY_PROG4), /*MACRO 4 <User defined> */ - KEY(7, 6, KEY_SELECT), - KEY(7, 7, KEY_DOWN) -}; - -static struct matrix_keymap_data board_map_data = { - .keymap = board_keymap, - .keymap_size = ARRAY_SIZE(board_keymap), -}; - -static struct twl4030_keypad_data zoom_kp_twl4030_data = { - .keymap_data = &board_map_data, - .rows = 8, - .cols = 8, - .rep = 1, -}; - -static struct regulator_consumer_supply zoom_vmmc1_supply[] = { - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), -}; - -static struct regulator_consumer_supply zoom_vsim_supply[] = { - REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"), -}; - -static struct regulator_consumer_supply zoom_vmmc2_supply[] = { - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"), -}; - -static struct regulator_consumer_supply zoom_vmmc3_supply[] = { - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.2"), -}; - -/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */ -static struct regulator_init_data zoom_vmmc1 = { - .constraints = { - .min_uV = 1850000, - .max_uV = 3150000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(zoom_vmmc1_supply), - .consumer_supplies = zoom_vmmc1_supply, -}; - -/* VMMC2 for MMC2 card */ -static struct regulator_init_data zoom_vmmc2 = { - .constraints = { - .min_uV = 1850000, - .max_uV = 1850000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(zoom_vmmc2_supply), - .consumer_supplies = zoom_vmmc2_supply, -}; - -/* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */ -static struct regulator_init_data zoom_vsim = { - .constraints = { - .min_uV = 1800000, - .max_uV = 3000000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(zoom_vsim_supply), - .consumer_supplies = zoom_vsim_supply, -}; - -static struct regulator_init_data zoom_vmmc3 = { - .constraints = { - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(zoom_vmmc3_supply), - .consumer_supplies = zoom_vmmc3_supply, -}; - -static struct fixed_voltage_config zoom_vwlan = { - .supply_name = "vwl1271", - .microvolts = 1800000, /* 1.8V */ - .gpio = OMAP_ZOOM_WLAN_PMENA_GPIO, - .startup_delay = 70000, /* 70msec */ - .enable_high = 1, - .enabled_at_boot = 0, - .init_data = &zoom_vmmc3, -}; - -static struct platform_device omap_vwlan_device = { - .name = "reg-fixed-voltage", - .id = 1, - .dev = { - .platform_data = &zoom_vwlan, - }, -}; - -static struct pwm_lookup zoom_pwm_lookup[] = { - PWM_LOOKUP("twl-pwm", 0, "leds_pwm", "zoom::keypad"), - PWM_LOOKUP("twl-pwm", 1, "pwm-backlight", "backlight"), -}; - -static struct led_pwm zoom_pwm_leds[] = { - { - .name = "zoom::keypad", - .max_brightness = 127, - .pwm_period_ns = 7812500, - }, -}; - -static struct led_pwm_platform_data zoom_pwm_data = { - .num_leds = ARRAY_SIZE(zoom_pwm_leds), - .leds = zoom_pwm_leds, -}; - -static struct platform_device zoom_leds_pwm = { - .name = "leds_pwm", - .id = -1, - .dev = { - .platform_data = &zoom_pwm_data, - }, -}; - -static struct platform_pwm_backlight_data zoom_backlight_data = { - .pwm_id = 1, - .max_brightness = 127, - .dft_brightness = 127, - .pwm_period_ns = 7812500, -}; - -static struct platform_device zoom_backlight_pwm = { - .name = "pwm-backlight", - .id = -1, - .dev = { - .platform_data = &zoom_backlight_data, - }, -}; - -static struct platform_device *zoom_devices[] __initdata = { - &omap_vwlan_device, - &zoom_leds_pwm, - &zoom_backlight_pwm, -}; - -static struct wl12xx_platform_data omap_zoom_wlan_data __initdata = { - .board_ref_clock = WL12XX_REFCLOCK_26, /* 26 MHz */ -}; - -static struct omap2_hsmmc_info mmc[] = { - { - .name = "external", - .mmc = 1, - .caps = MMC_CAP_4_BIT_DATA, - .gpio_wp = -EINVAL, - .power_saving = true, - .deferred = true, - }, - { - .name = "internal", - .mmc = 2, - .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, - .gpio_cd = -EINVAL, - .gpio_wp = -EINVAL, - .nonremovable = true, - .power_saving = true, - }, - { - .name = "wl1271", - .mmc = 3, - .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD, - .gpio_wp = -EINVAL, - .gpio_cd = -EINVAL, - .nonremovable = true, - }, - {} /* Terminator */ -}; - -static struct omap_tw4030_pdata omap_twl4030_audio_data = { - .voice_connected = true, - .custom_routing = true, - - .has_hs = OMAP_TWL4030_LEFT | OMAP_TWL4030_RIGHT, - .has_hf = OMAP_TWL4030_LEFT | OMAP_TWL4030_RIGHT, - - .has_mainmic = true, - .has_submic = true, - .has_hsmic = true, - .has_linein = OMAP_TWL4030_LEFT | OMAP_TWL4030_RIGHT, -}; - -static int zoom_twl_gpio_setup(struct device *dev, - unsigned gpio, unsigned ngpio) -{ - /* gpio + 0 is "mmc0_cd" (input/IRQ) */ - mmc[0].gpio_cd = gpio + 0; - omap_hsmmc_late_init(mmc); - - /* Audio setup */ - omap_twl4030_audio_data.jack_detect = gpio + 2; - omap_twl4030_audio_init("Zoom2", &omap_twl4030_audio_data); - - return 0; -} - -static struct twl4030_gpio_platform_data zoom_gpio_data = { - .setup = zoom_twl_gpio_setup, -}; - -static struct twl4030_platform_data zoom_twldata = { - /* platform_data for children goes here */ - .gpio = &zoom_gpio_data, - .keypad = &zoom_kp_twl4030_data, - .vmmc1 = &zoom_vmmc1, - .vmmc2 = &zoom_vmmc2, - .vsim = &zoom_vsim, -}; - -static int __init omap_i2c_init(void) -{ - omap3_pmic_get_config(&zoom_twldata, - TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_BCI | - TWL_COMMON_PDATA_MADC | TWL_COMMON_PDATA_AUDIO, - TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2); - - if (machine_is_omap_zoom2()) - zoom_twldata.audio->codec->ramp_delay_value = 3; /* 161 ms */ - - omap_pmic_init(1, 2400, "twl5030", 7 + OMAP_INTC_START, &zoom_twldata); - omap_register_i2c_bus(2, 400, NULL, 0); - omap_register_i2c_bus(3, 400, NULL, 0); - return 0; -} - -static void enable_board_wakeup_source(void) -{ - /* T2 interrupt line (keypad) */ - omap_mux_init_signal("sys_nirq", - OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP); -} - -void __init zoom_peripherals_init(void) -{ - int ret; - - omap_zoom_wlan_data.irq = gpio_to_irq(OMAP_ZOOM_WLAN_IRQ_GPIO); - ret = wl12xx_set_platform_data(&omap_zoom_wlan_data); - - if (ret) - pr_err("error setting wl12xx data: %d\n", ret); - - omap_hsmmc_init(mmc); - omap_i2c_init(); - pwm_add_table(zoom_pwm_lookup, ARRAY_SIZE(zoom_pwm_lookup)); - platform_add_devices(zoom_devices, ARRAY_SIZE(zoom_devices)); - usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); - usb_musb_init(NULL); - enable_board_wakeup_source(); - omap_serial_init(); -} diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c deleted file mode 100644 index 1a3dd865d8e..00000000000 --- a/arch/arm/mach-omap2/board-zoom.c +++ /dev/null @@ -1,159 +0,0 @@ -/* - * Copyright (C) 2009-2010 Texas Instruments Inc. - * Mikkel Christensen <mlc@ti.com> - * Felipe Balbi <balbi@ti.com> - * - * Modified from mach-omap2/board-ldp.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/input.h> -#include <linux/gpio.h> -#include <linux/i2c/twl.h> -#include <linux/mtd/nand.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -#include "common.h" - -#include "board-zoom.h" - -#include "board-flash.h" -#include "mux.h" -#include "sdram-micron-mt46h32m32lf-6.h" -#include "sdram-hynix-h8mbx00u0mer-0em.h" - -#define ZOOM3_EHCI_RESET_GPIO 64 - -#ifdef CONFIG_OMAP_MUX -static struct omap_board_mux board_mux[] __initdata = { - /* WLAN IRQ - GPIO 162 */ - OMAP3_MUX(MCBSP1_CLKX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), - /* WLAN POWER ENABLE - GPIO 101 */ - OMAP3_MUX(CAM_D2, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), - /* WLAN SDIO: MMC3 CMD */ - OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE3 | OMAP_PIN_INPUT_PULLUP), - /* WLAN SDIO: MMC3 CLK */ - OMAP3_MUX(ETK_CLK, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP), - /* WLAN SDIO: MMC3 DAT[0-3] */ - OMAP3_MUX(ETK_D3, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP), - OMAP3_MUX(ETK_D4, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP), - OMAP3_MUX(ETK_D5, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP), - OMAP3_MUX(ETK_D6, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP), - { .reg_offset = OMAP_MUX_TERMINATOR }, -}; -#endif - -static struct mtd_partition zoom_nand_partitions[] = { - /* All the partition sizes are listed in terms of NAND block size */ - { - .name = "X-Loader-NAND", - .offset = 0, - .size = 4 * (64 * 2048), /* 512KB, 0x80000 */ - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - { - .name = "U-Boot-NAND", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */ - .size = 10 * (64 * 2048), /* 1.25MB, 0x140000 */ - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - { - .name = "Boot Env-NAND", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x1c0000 */ - .size = 2 * (64 * 2048), /* 256KB, 0x40000 */ - }, - { - .name = "Kernel-NAND", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x0200000*/ - .size = 240 * (64 * 2048), /* 30M, 0x1E00000 */ - }, - { - .name = "system", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x2000000 */ - .size = 3328 * (64 * 2048), /* 416M, 0x1A000000 */ - }, - { - .name = "userdata", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x1C000000*/ - .size = 256 * (64 * 2048), /* 32M, 0x2000000 */ - }, - { - .name = "cache", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x1E000000*/ - .size = 256 * (64 * 2048), /* 32M, 0x2000000 */ - }, -}; - -static struct usbhs_phy_data phy_data[] __initdata = { - { - .port = 2, - .reset_gpio = ZOOM3_EHCI_RESET_GPIO, - .vcc_gpio = -EINVAL, - }, -}; - -static struct usbhs_omap_platform_data usbhs_bdata __initdata = { - .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, -}; - -static void __init omap_zoom_init(void) -{ - if (machine_is_omap_zoom2()) { - omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); - } else if (machine_is_omap_zoom3()) { - omap3_mux_init(board_mux, OMAP_PACKAGE_CBP); - omap_mux_init_gpio(ZOOM3_EHCI_RESET_GPIO, OMAP_PIN_OUTPUT); - - usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); - usbhs_init(&usbhs_bdata); - } - - board_nand_init(zoom_nand_partitions, - ARRAY_SIZE(zoom_nand_partitions), ZOOM_NAND_CS, - NAND_BUSWIDTH_16, nand_default_timings); - zoom_debugboard_init(); - zoom_peripherals_init(); - - if (machine_is_omap_zoom2()) - omap_sdrc_init(mt46h32m32lf6_sdrc_params, - mt46h32m32lf6_sdrc_params); - else if (machine_is_omap_zoom3()) - omap_sdrc_init(h8mbx00u0mer0em_sdrc_params, - h8mbx00u0mer0em_sdrc_params); - - zoom_display_init(); -} - -MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board") - .atag_offset = 0x100, - .reserve = omap_reserve, - .map_io = omap3_map_io, - .init_early = omap3430_init_early, - .init_irq = omap3_init_irq, - .handle_irq = omap3_intc_handle_irq, - .init_machine = omap_zoom_init, - .init_late = omap3430_init_late, - .init_time = omap3_sync32k_timer_init, - .restart = omap3xxx_restart, -MACHINE_END - -MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board") - .atag_offset = 0x100, - .reserve = omap_reserve, - .map_io = omap3_map_io, - .init_early = omap3630_init_early, - .init_irq = omap3_init_irq, - .handle_irq = omap3_intc_handle_irq, - .init_machine = omap_zoom_init, - .init_late = omap3630_init_late, - .init_time = omap3_sync32k_timer_init, - .restart = omap3xxx_restart, -MACHINE_END diff --git a/arch/arm/mach-omap2/board-zoom.h b/arch/arm/mach-omap2/board-zoom.h deleted file mode 100644 index 2e9486940ea..00000000000 --- a/arch/arm/mach-omap2/board-zoom.h +++ /dev/null @@ -1,10 +0,0 @@ -/* - * Defines for zoom boards - */ -#include <video/omapdss.h> - -#define ZOOM_NAND_CS 0 - -extern int __init zoom_debugboard_init(void); -extern void __init zoom_peripherals_init(void); -extern void __init zoom_display_init(void); diff --git a/arch/arm/mach-omap2/cclock3xxx_data.c b/arch/arm/mach-omap2/cclock3xxx_data.c index 334b7674590..03a2829beb8 100644 --- a/arch/arm/mach-omap2/cclock3xxx_data.c +++ b/arch/arm/mach-omap2/cclock3xxx_data.c @@ -3275,6 +3275,7 @@ static struct omap_clk omap36xx_clks[] = { static struct omap_clk omap34xx_omap36xx_clks[] = { CLK(NULL, "aes1_ick", &aes1_ick), CLK("omap_rng", "ick", &rng_ick), + CLK("omap3-rom-rng", "ick", &rng_ick), CLK(NULL, "sha11_ick", &sha11_ick), CLK(NULL, "des1_ick", &des1_ick), CLK(NULL, "cam_mclk", &cam_mclk), diff --git a/arch/arm/mach-omap2/clkt2xxx_apll.c b/arch/arm/mach-omap2/clkt2xxx_apll.c index 25b1feed480..c78e893eba7 100644 --- a/arch/arm/mach-omap2/clkt2xxx_apll.c +++ b/arch/arm/mach-omap2/clkt2xxx_apll.c @@ -52,7 +52,7 @@ static bool omap2xxx_clk_apll_locked(struct clk_hw *hw) apll_mask = EN_APLL_LOCKED << clk->enable_bit; - r = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN); + r = omap2xxx_cm_get_pll_status(); return ((r & apll_mask) == apll_mask) ? true : false; } @@ -126,7 +126,7 @@ u32 omap2xxx_get_apll_clkin(void) { u32 aplls, srate = 0; - aplls = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL1); + aplls = omap2xxx_cm_get_pll_config(); aplls &= OMAP24XX_APLLS_CLKIN_MASK; aplls >>= OMAP24XX_APLLS_CLKIN_SHIFT; diff --git a/arch/arm/mach-omap2/clkt2xxx_dpllcore.c b/arch/arm/mach-omap2/clkt2xxx_dpllcore.c index d8620105c42..3ff32543493 100644 --- a/arch/arm/mach-omap2/clkt2xxx_dpllcore.c +++ b/arch/arm/mach-omap2/clkt2xxx_dpllcore.c @@ -60,8 +60,7 @@ unsigned long omap2xxx_clk_get_core_rate(void) core_clk = omap2_get_dpll_rate(dpll_core_ck); - v = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2); - v &= OMAP24XX_CORE_CLK_SRC_MASK; + v = omap2xxx_cm_get_core_clk_src(); if (v == CORE_CLK_SRC_32K) core_clk = 32768; @@ -79,8 +78,7 @@ static long omap2_dpllcore_round_rate(unsigned long target_rate) { u32 high, low, core_clk_src; - core_clk_src = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2); - core_clk_src &= OMAP24XX_CORE_CLK_SRC_MASK; + core_clk_src = omap2xxx_cm_get_core_clk_src(); if (core_clk_src == CORE_CLK_SRC_DPLL) { /* DPLL clockout */ high = curr_prcm_set->dpll_speed * 2; @@ -120,8 +118,7 @@ int omap2_reprogram_dpllcore(struct clk_hw *hw, unsigned long rate, const struct dpll_data *dd; cur_rate = omap2xxx_clk_get_core_rate(); - mult = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2); - mult &= OMAP24XX_CORE_CLK_SRC_MASK; + mult = omap2xxx_cm_get_core_clk_src(); if ((rate == (cur_rate / 2)) && (mult == 2)) { omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1); @@ -145,7 +142,7 @@ int omap2_reprogram_dpllcore(struct clk_hw *hw, unsigned long rate, tmpset.cm_clksel1_pll &= ~(dd->mult_mask | dd->div1_mask); div = ((curr_prcm_set->xtal_speed / 1000000) - 1); - tmpset.cm_clksel2_pll = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2); + tmpset.cm_clksel2_pll = omap2xxx_cm_get_core_pll_config(); tmpset.cm_clksel2_pll &= ~OMAP24XX_CORE_CLK_SRC_MASK; if (rate > low) { tmpset.cm_clksel2_pll |= CORE_CLK_SRC_DPLL_X2; diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c index ae2b35e76dc..b935ed2922d 100644 --- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c +++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c @@ -98,7 +98,7 @@ long omap2_round_to_table_rate(struct clk_hw *hw, unsigned long rate, int omap2_select_table_rate(struct clk_hw *hw, unsigned long rate, unsigned long parent_rate) { - u32 cur_rate, done_rate, bypass = 0, tmp; + u32 cur_rate, done_rate, bypass = 0; const struct prcm_config *prcm; unsigned long found_speed = 0; unsigned long flags; @@ -141,23 +141,11 @@ int omap2_select_table_rate(struct clk_hw *hw, unsigned long rate, else done_rate = CORE_CLK_SRC_DPLL; - /* MPU divider */ - omap2_cm_write_mod_reg(prcm->cm_clksel_mpu, MPU_MOD, CM_CLKSEL); - - /* dsp + iva1 div(2420), iva2.1(2430) */ - omap2_cm_write_mod_reg(prcm->cm_clksel_dsp, - OMAP24XX_DSP_MOD, CM_CLKSEL); - - omap2_cm_write_mod_reg(prcm->cm_clksel_gfx, GFX_MOD, CM_CLKSEL); - - /* Major subsystem dividers */ - tmp = omap2_cm_read_mod_reg(CORE_MOD, CM_CLKSEL1) & OMAP24XX_CLKSEL_DSS2_MASK; - omap2_cm_write_mod_reg(prcm->cm_clksel1_core | tmp, CORE_MOD, - CM_CLKSEL1); - - if (cpu_is_omap2430()) - omap2_cm_write_mod_reg(prcm->cm_clksel_mdm, - OMAP2430_MDM_MOD, CM_CLKSEL); + omap2xxx_cm_set_mod_dividers(prcm->cm_clksel_mpu, + prcm->cm_clksel_dsp, + prcm->cm_clksel_gfx, + prcm->cm_clksel1_core, + prcm->cm_clksel_mdm); /* x2 to enter omap2xxx_sdrc_init_params() */ omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1); diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index 0c38ca96c84..c7c5d31e908 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -543,6 +543,44 @@ int omap2_clk_disable_autoidle_all(void) } /** + * omap2_clk_deny_idle - disable autoidle on an OMAP clock + * @clk: struct clk * to disable autoidle for + * + * Disable autoidle on an OMAP clock. + */ +int omap2_clk_deny_idle(struct clk *clk) +{ + struct clk_hw_omap *c; + + if (__clk_get_flags(clk) & CLK_IS_BASIC) + return -EINVAL; + + c = to_clk_hw_omap(__clk_get_hw(clk)); + if (c->ops && c->ops->deny_idle) + c->ops->deny_idle(c); + return 0; +} + +/** + * omap2_clk_allow_idle - enable autoidle on an OMAP clock + * @clk: struct clk * to enable autoidle for + * + * Enable autoidle on an OMAP clock. + */ +int omap2_clk_allow_idle(struct clk *clk) +{ + struct clk_hw_omap *c; + + if (__clk_get_flags(clk) & CLK_IS_BASIC) + return -EINVAL; + + c = to_clk_hw_omap(__clk_get_hw(clk)); + if (c->ops && c->ops->allow_idle) + c->ops->allow_idle(c); + return 0; +} + +/** * omap2_clk_enable_init_clocks - prepare & enable a list of clocks * @clk_names: ptr to an array of strings of clock names to enable * @num_clocks: number of clock names in @clk_names diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index 7aa32cd292f..82916cc82c9 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -411,6 +411,8 @@ void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk, void omap2_init_clk_hw_omap_clocks(struct clk *clk); int omap2_clk_enable_autoidle_all(void); int omap2_clk_disable_autoidle_all(void); +int omap2_clk_allow_idle(struct clk *clk); +int omap2_clk_deny_idle(struct clk *clk); void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks); int omap2_clk_switch_mpurate_at_boot(const char *mpurate_ck_name); void omap2_clk_print_new_rates(const char *hfclkin_ck_name, diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h index 4b03394fa0c..f17f00697cc 100644 --- a/arch/arm/mach-omap2/clockdomain.h +++ b/arch/arm/mach-omap2/clockdomain.h @@ -132,7 +132,7 @@ struct clockdomain { u8 _flags; const u8 dep_bit; const u8 prcm_partition; - const s16 cm_inst; + const u16 cm_inst; const u16 clkdm_offs; struct clkdm_dep *wkdep_srcs; struct clkdm_dep *sleepdep_srcs; @@ -218,6 +218,7 @@ extern void __init am33xx_clockdomains_init(void); extern void __init omap44xx_clockdomains_init(void); extern void __init omap54xx_clockdomains_init(void); extern void __init dra7xx_clockdomains_init(void); +void am43xx_clockdomains_init(void); extern void clkdm_add_autodeps(struct clockdomain *clkdm); extern void clkdm_del_autodeps(struct clockdomain *clkdm); @@ -226,6 +227,7 @@ extern struct clkdm_ops omap2_clkdm_operations; extern struct clkdm_ops omap3_clkdm_operations; extern struct clkdm_ops omap4_clkdm_operations; extern struct clkdm_ops am33xx_clkdm_operations; +extern struct clkdm_ops am43xx_clkdm_operations; extern struct clkdm_dep gfx_24xx_wkdeps[]; extern struct clkdm_dep dsp_24xx_wkdeps[]; diff --git a/arch/arm/mach-omap2/clockdomains43xx_data.c b/arch/arm/mach-omap2/clockdomains43xx_data.c new file mode 100644 index 00000000000..6d71c6082a2 --- /dev/null +++ b/arch/arm/mach-omap2/clockdomains43xx_data.c @@ -0,0 +1,196 @@ +/* + * AM43xx Clock domains framework + * + * Copyright (C) 2013 Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/io.h> + +#include "clockdomain.h" +#include "prcm44xx.h" +#include "prcm43xx.h" + +static struct clockdomain l4_cefuse_43xx_clkdm = { + .name = "l4_cefuse_clkdm", + .pwrdm = { .name = "cefuse_pwrdm" }, + .prcm_partition = AM43XX_CM_PARTITION, + .cm_inst = AM43XX_CM_CEFUSE_INST, + .clkdm_offs = AM43XX_CM_CEFUSE_CEFUSE_CDOFFS, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain mpu_43xx_clkdm = { + .name = "mpu_clkdm", + .pwrdm = { .name = "mpu_pwrdm" }, + .prcm_partition = AM43XX_CM_PARTITION, + .cm_inst = AM43XX_CM_MPU_INST, + .clkdm_offs = AM43XX_CM_MPU_MPU_CDOFFS, + .flags = CLKDM_CAN_HWSUP_SWSUP, +}; + +static struct clockdomain l4ls_43xx_clkdm = { + .name = "l4ls_clkdm", + .pwrdm = { .name = "per_pwrdm" }, + .prcm_partition = AM43XX_CM_PARTITION, + .cm_inst = AM43XX_CM_PER_INST, + .clkdm_offs = AM43XX_CM_PER_L4LS_CDOFFS, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain tamper_43xx_clkdm = { + .name = "tamper_clkdm", + .pwrdm = { .name = "tamper_pwrdm" }, + .prcm_partition = AM43XX_CM_PARTITION, + .cm_inst = AM43XX_CM_TAMPER_INST, + .clkdm_offs = AM43XX_CM_TAMPER_TAMPER_CDOFFS, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain l4_rtc_43xx_clkdm = { + .name = "l4_rtc_clkdm", + .pwrdm = { .name = "rtc_pwrdm" }, + .prcm_partition = AM43XX_CM_PARTITION, + .cm_inst = AM43XX_CM_RTC_INST, + .clkdm_offs = AM43XX_CM_RTC_RTC_CDOFFS, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain pruss_ocp_43xx_clkdm = { + .name = "pruss_ocp_clkdm", + .pwrdm = { .name = "per_pwrdm" }, + .prcm_partition = AM43XX_CM_PARTITION, + .cm_inst = AM43XX_CM_PER_INST, + .clkdm_offs = AM43XX_CM_PER_ICSS_CDOFFS, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain ocpwp_l3_43xx_clkdm = { + .name = "ocpwp_l3_clkdm", + .pwrdm = { .name = "per_pwrdm" }, + .prcm_partition = AM43XX_CM_PARTITION, + .cm_inst = AM43XX_CM_PER_INST, + .clkdm_offs = AM43XX_CM_PER_OCPWP_L3_CDOFFS, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain l3s_tsc_43xx_clkdm = { + .name = "l3s_tsc_clkdm", + .pwrdm = { .name = "wkup_pwrdm" }, + .prcm_partition = AM43XX_CM_PARTITION, + .cm_inst = AM43XX_CM_WKUP_INST, + .clkdm_offs = AM43XX_CM_WKUP_L3S_TSC_CDOFFS, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain dss_43xx_clkdm = { + .name = "dss_clkdm", + .pwrdm = { .name = "per_pwrdm" }, + .prcm_partition = AM43XX_CM_PARTITION, + .cm_inst = AM43XX_CM_PER_INST, + .clkdm_offs = AM43XX_CM_PER_DSS_CDOFFS, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain l3_aon_43xx_clkdm = { + .name = "l3_aon_clkdm", + .pwrdm = { .name = "wkup_pwrdm" }, + .prcm_partition = AM43XX_CM_PARTITION, + .cm_inst = AM43XX_CM_WKUP_INST, + .clkdm_offs = AM43XX_CM_WKUP_L3_AON_CDOFFS, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain emif_43xx_clkdm = { + .name = "emif_clkdm", + .pwrdm = { .name = "per_pwrdm" }, + .prcm_partition = AM43XX_CM_PARTITION, + .cm_inst = AM43XX_CM_PER_INST, + .clkdm_offs = AM43XX_CM_PER_EMIF_CDOFFS, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain l4_wkup_aon_43xx_clkdm = { + .name = "l4_wkup_aon_clkdm", + .pwrdm = { .name = "wkup_pwrdm" }, + .prcm_partition = AM43XX_CM_PARTITION, + .cm_inst = AM43XX_CM_WKUP_INST, + .clkdm_offs = AM43XX_CM_WKUP_L4_WKUP_AON_CDOFFS, +}; + +static struct clockdomain l3_43xx_clkdm = { + .name = "l3_clkdm", + .pwrdm = { .name = "per_pwrdm" }, + .prcm_partition = AM43XX_CM_PARTITION, + .cm_inst = AM43XX_CM_PER_INST, + .clkdm_offs = AM43XX_CM_PER_L3_CDOFFS, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain l4_wkup_43xx_clkdm = { + .name = "l4_wkup_clkdm", + .pwrdm = { .name = "wkup_pwrdm" }, + .prcm_partition = AM43XX_CM_PARTITION, + .cm_inst = AM43XX_CM_WKUP_INST, + .clkdm_offs = AM43XX_CM_WKUP_WKUP_CDOFFS, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain cpsw_125mhz_43xx_clkdm = { + .name = "cpsw_125mhz_clkdm", + .pwrdm = { .name = "per_pwrdm" }, + .prcm_partition = AM43XX_CM_PARTITION, + .cm_inst = AM43XX_CM_PER_INST, + .clkdm_offs = AM43XX_CM_PER_CPSW_CDOFFS, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain gfx_l3_43xx_clkdm = { + .name = "gfx_l3_clkdm", + .pwrdm = { .name = "gfx_pwrdm" }, + .prcm_partition = AM43XX_CM_PARTITION, + .cm_inst = AM43XX_CM_GFX_INST, + .clkdm_offs = AM43XX_CM_GFX_GFX_L3_CDOFFS, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain l3s_43xx_clkdm = { + .name = "l3s_clkdm", + .pwrdm = { .name = "per_pwrdm" }, + .prcm_partition = AM43XX_CM_PARTITION, + .cm_inst = AM43XX_CM_PER_INST, + .clkdm_offs = AM43XX_CM_PER_L3S_CDOFFS, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain *clockdomains_am43xx[] __initdata = { + &l4_cefuse_43xx_clkdm, + &mpu_43xx_clkdm, + &l4ls_43xx_clkdm, + &tamper_43xx_clkdm, + &l4_rtc_43xx_clkdm, + &pruss_ocp_43xx_clkdm, + &ocpwp_l3_43xx_clkdm, + &l3s_tsc_43xx_clkdm, + &dss_43xx_clkdm, + &l3_aon_43xx_clkdm, + &emif_43xx_clkdm, + &l4_wkup_aon_43xx_clkdm, + &l3_43xx_clkdm, + &l4_wkup_43xx_clkdm, + &cpsw_125mhz_43xx_clkdm, + &gfx_l3_43xx_clkdm, + &l3s_43xx_clkdm, + NULL +}; + +void __init am43xx_clockdomains_init(void) +{ + clkdm_register_platform_funcs(&am43xx_clkdm_operations); + clkdm_register_clkdms(clockdomains_am43xx); + clkdm_complete_init(); +} diff --git a/arch/arm/mach-omap2/cm2xxx.c b/arch/arm/mach-omap2/cm2xxx.c index 6774a53a387..ce25abbcffa 100644 --- a/arch/arm/mach-omap2/cm2xxx.c +++ b/arch/arm/mach-omap2/cm2xxx.c @@ -327,6 +327,73 @@ struct clkdm_ops omap2_clkdm_operations = { .clkdm_clk_disable = omap2xxx_clkdm_clk_disable, }; +int omap2xxx_cm_fclks_active(void) +{ + u32 f1, f2; + + f1 = omap2_cm_read_mod_reg(CORE_MOD, CM_FCLKEN1); + f2 = omap2_cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2); + + return (f1 | f2) ? 1 : 0; +} + +int omap2xxx_cm_mpu_retention_allowed(void) +{ + u32 l; + + /* Check for MMC, UART2, UART1, McSPI2, McSPI1 and DSS1. */ + l = omap2_cm_read_mod_reg(CORE_MOD, CM_FCLKEN1); + if (l & (OMAP2420_EN_MMC_MASK | OMAP24XX_EN_UART2_MASK | + OMAP24XX_EN_UART1_MASK | OMAP24XX_EN_MCSPI2_MASK | + OMAP24XX_EN_MCSPI1_MASK | OMAP24XX_EN_DSS1_MASK)) + return 0; + /* Check for UART3. */ + l = omap2_cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2); + if (l & OMAP24XX_EN_UART3_MASK) + return 0; + + return 1; +} + +u32 omap2xxx_cm_get_core_clk_src(void) +{ + u32 v; + + v = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2); + v &= OMAP24XX_CORE_CLK_SRC_MASK; + + return v; +} + +u32 omap2xxx_cm_get_core_pll_config(void) +{ + return omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2); +} + +u32 omap2xxx_cm_get_pll_config(void) +{ + return omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL1); +} + +u32 omap2xxx_cm_get_pll_status(void) +{ + return omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN); +} + +void omap2xxx_cm_set_mod_dividers(u32 mpu, u32 dsp, u32 gfx, u32 core, u32 mdm) +{ + u32 tmp; + + omap2_cm_write_mod_reg(mpu, MPU_MOD, CM_CLKSEL); + omap2_cm_write_mod_reg(dsp, OMAP24XX_DSP_MOD, CM_CLKSEL); + omap2_cm_write_mod_reg(gfx, GFX_MOD, CM_CLKSEL); + tmp = omap2_cm_read_mod_reg(CORE_MOD, CM_CLKSEL1) & + OMAP24XX_CLKSEL_DSS2_MASK; + omap2_cm_write_mod_reg(core | tmp, CORE_MOD, CM_CLKSEL1); + if (cpu_is_omap2430()) + omap2_cm_write_mod_reg(mdm, OMAP2430_MDM_MOD, CM_CLKSEL); +} + /* * */ diff --git a/arch/arm/mach-omap2/cm2xxx.h b/arch/arm/mach-omap2/cm2xxx.h index 4cbb39b051d..891d81c3c8f 100644 --- a/arch/arm/mach-omap2/cm2xxx.h +++ b/arch/arm/mach-omap2/cm2xxx.h @@ -62,6 +62,14 @@ extern int omap2xxx_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift); extern int omap2xxx_cm_split_idlest_reg(void __iomem *idlest_reg, s16 *prcm_inst, u8 *idlest_reg_id); +extern int omap2xxx_cm_fclks_active(void); +extern int omap2xxx_cm_mpu_retention_allowed(void); +extern u32 omap2xxx_cm_get_core_clk_src(void); +extern u32 omap2xxx_cm_get_core_pll_config(void); +extern u32 omap2xxx_cm_get_pll_config(void); +extern u32 omap2xxx_cm_get_pll_status(void); +extern void omap2xxx_cm_set_mod_dividers(u32 mpu, u32 dsp, u32 gfx, u32 core, + u32 mdm); extern int __init omap2xxx_cm_init(void); diff --git a/arch/arm/mach-omap2/cm33xx.c b/arch/arm/mach-omap2/cm33xx.c index 325a5157657..40a22e5649a 100644 --- a/arch/arm/mach-omap2/cm33xx.c +++ b/arch/arm/mach-omap2/cm33xx.c @@ -48,13 +48,13 @@ /* Private functions */ /* Read a register in a CM instance */ -static inline u32 am33xx_cm_read_reg(s16 inst, u16 idx) +static inline u32 am33xx_cm_read_reg(u16 inst, u16 idx) { return __raw_readl(cm_base + inst + idx); } /* Write into a register in a CM */ -static inline void am33xx_cm_write_reg(u32 val, s16 inst, u16 idx) +static inline void am33xx_cm_write_reg(u32 val, u16 inst, u16 idx) { __raw_writel(val, cm_base + inst + idx); } @@ -138,7 +138,7 @@ static bool _is_module_ready(u16 inst, s16 cdoffs, u16 clkctrl_offs) * @c must be the unshifted value for CLKTRCTRL - i.e., this function * will handle the shift itself. */ -static void _clktrctrl_write(u8 c, s16 inst, u16 cdoffs) +static void _clktrctrl_write(u8 c, u16 inst, u16 cdoffs) { u32 v; @@ -158,7 +158,7 @@ static void _clktrctrl_write(u8 c, s16 inst, u16 cdoffs) * Returns true if the clockdomain referred to by (@inst, @cdoffs) * is in hardware-supervised idle mode, or 0 otherwise. */ -bool am33xx_cm_is_clkdm_in_hwsup(s16 inst, u16 cdoffs) +bool am33xx_cm_is_clkdm_in_hwsup(u16 inst, u16 cdoffs) { u32 v; @@ -177,7 +177,7 @@ bool am33xx_cm_is_clkdm_in_hwsup(s16 inst, u16 cdoffs) * Put a clockdomain referred to by (@inst, @cdoffs) into * hardware-supervised idle mode. No return value. */ -void am33xx_cm_clkdm_enable_hwsup(s16 inst, u16 cdoffs) +void am33xx_cm_clkdm_enable_hwsup(u16 inst, u16 cdoffs) { _clktrctrl_write(OMAP34XX_CLKSTCTRL_ENABLE_AUTO, inst, cdoffs); } @@ -191,7 +191,7 @@ void am33xx_cm_clkdm_enable_hwsup(s16 inst, u16 cdoffs) * software-supervised idle mode, i.e., controlled manually by the * Linux OMAP clockdomain code. No return value. */ -void am33xx_cm_clkdm_disable_hwsup(s16 inst, u16 cdoffs) +void am33xx_cm_clkdm_disable_hwsup(u16 inst, u16 cdoffs) { _clktrctrl_write(OMAP34XX_CLKSTCTRL_DISABLE_AUTO, inst, cdoffs); } @@ -204,7 +204,7 @@ void am33xx_cm_clkdm_disable_hwsup(s16 inst, u16 cdoffs) * Put a clockdomain referred to by (@inst, @cdoffs) into idle * No return value. */ -void am33xx_cm_clkdm_force_sleep(s16 inst, u16 cdoffs) +void am33xx_cm_clkdm_force_sleep(u16 inst, u16 cdoffs) { _clktrctrl_write(OMAP34XX_CLKSTCTRL_FORCE_SLEEP, inst, cdoffs); } @@ -217,7 +217,7 @@ void am33xx_cm_clkdm_force_sleep(s16 inst, u16 cdoffs) * Take a clockdomain referred to by (@inst, @cdoffs) out of idle, * waking it up. No return value. */ -void am33xx_cm_clkdm_force_wakeup(s16 inst, u16 cdoffs) +void am33xx_cm_clkdm_force_wakeup(u16 inst, u16 cdoffs) { _clktrctrl_write(OMAP34XX_CLKSTCTRL_FORCE_WAKEUP, inst, cdoffs); } diff --git a/arch/arm/mach-omap2/cm33xx.h b/arch/arm/mach-omap2/cm33xx.h index 9d1f4fcdebb..cfb8891b0c0 100644 --- a/arch/arm/mach-omap2/cm33xx.h +++ b/arch/arm/mach-omap2/cm33xx.h @@ -377,13 +377,13 @@ #ifndef __ASSEMBLER__ -extern bool am33xx_cm_is_clkdm_in_hwsup(s16 inst, u16 cdoffs); -extern void am33xx_cm_clkdm_enable_hwsup(s16 inst, u16 cdoffs); -extern void am33xx_cm_clkdm_disable_hwsup(s16 inst, u16 cdoffs); -extern void am33xx_cm_clkdm_force_sleep(s16 inst, u16 cdoffs); -extern void am33xx_cm_clkdm_force_wakeup(s16 inst, u16 cdoffs); +bool am33xx_cm_is_clkdm_in_hwsup(u16 inst, u16 cdoffs); +void am33xx_cm_clkdm_enable_hwsup(u16 inst, u16 cdoffs); +void am33xx_cm_clkdm_disable_hwsup(u16 inst, u16 cdoffs); +void am33xx_cm_clkdm_force_sleep(u16 inst, u16 cdoffs); +void am33xx_cm_clkdm_force_wakeup(u16 inst, u16 cdoffs); -#if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_AM43XX) +#ifdef CONFIG_SOC_AM33XX extern int am33xx_cm_wait_module_idle(u16 inst, s16 cdoffs, u16 clkctrl_offs); extern void am33xx_cm_module_enable(u8 mode, u16 inst, s16 cdoffs, diff --git a/arch/arm/mach-omap2/cm3xxx.c b/arch/arm/mach-omap2/cm3xxx.c index 9061c307d91..f6f028867bf 100644 --- a/arch/arm/mach-omap2/cm3xxx.c +++ b/arch/arm/mach-omap2/cm3xxx.c @@ -636,6 +636,28 @@ void omap3_cm_restore_context(void) OMAP3_CM_CLKOUT_CTRL_OFFSET); } +void omap3_cm_save_scratchpad_contents(u32 *ptr) +{ + *ptr++ = omap2_cm_read_mod_reg(CORE_MOD, CM_CLKSEL); + *ptr++ = omap2_cm_read_mod_reg(WKUP_MOD, CM_CLKSEL); + *ptr++ = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN); + + /* + * As per erratum i671, ROM code does not respect the PER DPLL + * programming scheme if CM_AUTOIDLE_PLL..AUTO_PERIPH_DPLL == 1. + * Then, in anycase, clear these bits to avoid extra latencies. + */ + *ptr++ = omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE) & + ~OMAP3430_AUTO_PERIPH_DPLL_MASK; + *ptr++ = omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL1_PLL); + *ptr++ = omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL2_PLL); + *ptr++ = omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL3); + *ptr++ = omap2_cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKEN_PLL); + *ptr++ = omap2_cm_read_mod_reg(MPU_MOD, OMAP3430_CM_AUTOIDLE_PLL); + *ptr++ = omap2_cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL); + *ptr++ = omap2_cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKSEL2_PLL); +} + /* * */ diff --git a/arch/arm/mach-omap2/cm3xxx.h b/arch/arm/mach-omap2/cm3xxx.h index e8e146f4a43..8224c91b4d7 100644 --- a/arch/arm/mach-omap2/cm3xxx.h +++ b/arch/arm/mach-omap2/cm3xxx.h @@ -83,6 +83,7 @@ extern int omap3xxx_cm_split_idlest_reg(void __iomem *idlest_reg, extern void omap3_cm_save_context(void); extern void omap3_cm_restore_context(void); +extern void omap3_cm_save_scratchpad_contents(u32 *ptr); extern int __init omap3xxx_cm_init(void); diff --git a/arch/arm/mach-omap2/cminst44xx.c b/arch/arm/mach-omap2/cminst44xx.c index f0290f5566f..731ca134348 100644 --- a/arch/arm/mach-omap2/cminst44xx.c +++ b/arch/arm/mach-omap2/cminst44xx.c @@ -111,7 +111,7 @@ static bool _is_module_ready(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs) /* Public functions */ /* Read a register in a CM instance */ -u32 omap4_cminst_read_inst_reg(u8 part, s16 inst, u16 idx) +u32 omap4_cminst_read_inst_reg(u8 part, u16 inst, u16 idx) { BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS || part == OMAP4430_INVALID_PRCM_PARTITION || @@ -120,7 +120,7 @@ u32 omap4_cminst_read_inst_reg(u8 part, s16 inst, u16 idx) } /* Write into a register in a CM instance */ -void omap4_cminst_write_inst_reg(u32 val, u8 part, s16 inst, u16 idx) +void omap4_cminst_write_inst_reg(u32 val, u8 part, u16 inst, u16 idx) { BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS || part == OMAP4430_INVALID_PRCM_PARTITION || @@ -129,7 +129,7 @@ void omap4_cminst_write_inst_reg(u32 val, u8 part, s16 inst, u16 idx) } /* Read-modify-write a register in CM1. Caller must lock */ -u32 omap4_cminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part, s16 inst, +u32 omap4_cminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part, u16 inst, s16 idx) { u32 v; @@ -142,12 +142,12 @@ u32 omap4_cminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part, s16 inst, return v; } -u32 omap4_cminst_set_inst_reg_bits(u32 bits, u8 part, s16 inst, s16 idx) +u32 omap4_cminst_set_inst_reg_bits(u32 bits, u8 part, u16 inst, s16 idx) { return omap4_cminst_rmw_inst_reg_bits(bits, bits, part, inst, idx); } -u32 omap4_cminst_clear_inst_reg_bits(u32 bits, u8 part, s16 inst, s16 idx) +u32 omap4_cminst_clear_inst_reg_bits(u32 bits, u8 part, u16 inst, s16 idx) { return omap4_cminst_rmw_inst_reg_bits(bits, 0x0, part, inst, idx); } @@ -177,7 +177,7 @@ u32 omap4_cminst_read_inst_reg_bits(u8 part, u16 inst, s16 idx, u32 mask) * @c must be the unshifted value for CLKTRCTRL - i.e., this function * will handle the shift itself. */ -static void _clktrctrl_write(u8 c, u8 part, s16 inst, u16 cdoffs) +static void _clktrctrl_write(u8 c, u8 part, u16 inst, u16 cdoffs) { u32 v; @@ -196,7 +196,7 @@ static void _clktrctrl_write(u8 c, u8 part, s16 inst, u16 cdoffs) * Returns true if the clockdomain referred to by (@part, @inst, @cdoffs) * is in hardware-supervised idle mode, or 0 otherwise. */ -bool omap4_cminst_is_clkdm_in_hwsup(u8 part, s16 inst, u16 cdoffs) +bool omap4_cminst_is_clkdm_in_hwsup(u8 part, u16 inst, u16 cdoffs) { u32 v; @@ -216,7 +216,7 @@ bool omap4_cminst_is_clkdm_in_hwsup(u8 part, s16 inst, u16 cdoffs) * Put a clockdomain referred to by (@part, @inst, @cdoffs) into * hardware-supervised idle mode. No return value. */ -void omap4_cminst_clkdm_enable_hwsup(u8 part, s16 inst, u16 cdoffs) +void omap4_cminst_clkdm_enable_hwsup(u8 part, u16 inst, u16 cdoffs) { _clktrctrl_write(OMAP34XX_CLKSTCTRL_ENABLE_AUTO, part, inst, cdoffs); } @@ -231,7 +231,7 @@ void omap4_cminst_clkdm_enable_hwsup(u8 part, s16 inst, u16 cdoffs) * software-supervised idle mode, i.e., controlled manually by the * Linux OMAP clockdomain code. No return value. */ -void omap4_cminst_clkdm_disable_hwsup(u8 part, s16 inst, u16 cdoffs) +void omap4_cminst_clkdm_disable_hwsup(u8 part, u16 inst, u16 cdoffs) { _clktrctrl_write(OMAP34XX_CLKSTCTRL_DISABLE_AUTO, part, inst, cdoffs); } @@ -245,7 +245,7 @@ void omap4_cminst_clkdm_disable_hwsup(u8 part, s16 inst, u16 cdoffs) * Take a clockdomain referred to by (@part, @inst, @cdoffs) out of idle, * waking it up. No return value. */ -void omap4_cminst_clkdm_force_wakeup(u8 part, s16 inst, u16 cdoffs) +void omap4_cminst_clkdm_force_wakeup(u8 part, u16 inst, u16 cdoffs) { _clktrctrl_write(OMAP34XX_CLKSTCTRL_FORCE_WAKEUP, part, inst, cdoffs); } @@ -483,3 +483,12 @@ struct clkdm_ops omap4_clkdm_operations = { .clkdm_clk_enable = omap4_clkdm_clk_enable, .clkdm_clk_disable = omap4_clkdm_clk_disable, }; + +struct clkdm_ops am43xx_clkdm_operations = { + .clkdm_sleep = omap4_clkdm_sleep, + .clkdm_wakeup = omap4_clkdm_wakeup, + .clkdm_allow_idle = omap4_clkdm_allow_idle, + .clkdm_deny_idle = omap4_clkdm_deny_idle, + .clkdm_clk_enable = omap4_clkdm_clk_enable, + .clkdm_clk_disable = omap4_clkdm_clk_disable, +}; diff --git a/arch/arm/mach-omap2/cminst44xx.h b/arch/arm/mach-omap2/cminst44xx.h index bd7bab88974..7f56ea444bc 100644 --- a/arch/arm/mach-omap2/cminst44xx.h +++ b/arch/arm/mach-omap2/cminst44xx.h @@ -11,11 +11,11 @@ #ifndef __ARCH_ASM_MACH_OMAP2_CMINST44XX_H #define __ARCH_ASM_MACH_OMAP2_CMINST44XX_H -extern bool omap4_cminst_is_clkdm_in_hwsup(u8 part, s16 inst, u16 cdoffs); -extern void omap4_cminst_clkdm_enable_hwsup(u8 part, s16 inst, u16 cdoffs); -extern void omap4_cminst_clkdm_disable_hwsup(u8 part, s16 inst, u16 cdoffs); -extern void omap4_cminst_clkdm_force_sleep(u8 part, s16 inst, u16 cdoffs); -extern void omap4_cminst_clkdm_force_wakeup(u8 part, s16 inst, u16 cdoffs); +bool omap4_cminst_is_clkdm_in_hwsup(u8 part, u16 inst, u16 cdoffs); +void omap4_cminst_clkdm_enable_hwsup(u8 part, u16 inst, u16 cdoffs); +void omap4_cminst_clkdm_disable_hwsup(u8 part, u16 inst, u16 cdoffs); +void omap4_cminst_clkdm_force_sleep(u8 part, u16 inst, u16 cdoffs); +void omap4_cminst_clkdm_force_wakeup(u8 part, u16 inst, u16 cdoffs); extern int omap4_cminst_wait_module_ready(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs); extern int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs); @@ -27,14 +27,14 @@ extern void omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs, * In an ideal world, we would not export these low-level functions, * but this will probably take some time to fix properly */ -extern u32 omap4_cminst_read_inst_reg(u8 part, s16 inst, u16 idx); -extern void omap4_cminst_write_inst_reg(u32 val, u8 part, s16 inst, u16 idx); -extern u32 omap4_cminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part, - s16 inst, s16 idx); -extern u32 omap4_cminst_set_inst_reg_bits(u32 bits, u8 part, s16 inst, - s16 idx); -extern u32 omap4_cminst_clear_inst_reg_bits(u32 bits, u8 part, s16 inst, - s16 idx); +u32 omap4_cminst_read_inst_reg(u8 part, u16 inst, u16 idx); +void omap4_cminst_write_inst_reg(u32 val, u8 part, u16 inst, u16 idx); +u32 omap4_cminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part, + u16 inst, s16 idx); +u32 omap4_cminst_set_inst_reg_bits(u32 bits, u8 part, u16 inst, + s16 idx); +u32 omap4_cminst_clear_inst_reg_bits(u32 bits, u8 part, u16 inst, + s16 idx); extern u32 omap4_cminst_read_inst_reg_bits(u8 part, u16 inst, s16 idx, u32 mask); diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index 4a5684b9649..f7644febee8 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -98,6 +98,7 @@ void am35xx_init_early(void); void ti81xx_init_early(void); void am33xx_init_early(void); void am43xx_init_early(void); +void am43xx_init_late(void); void omap4430_init_early(void); void omap5_init_early(void); void omap3_init_late(void); /* Do not use this one */ @@ -109,8 +110,11 @@ void omap35xx_init_late(void); void omap3630_init_late(void); void am35xx_init_late(void); void ti81xx_init_late(void); +void am33xx_init_late(void); +void omap5_init_late(void); int omap2_common_pm_late_init(void); void dra7xx_init_early(void); +void dra7xx_init_late(void); #ifdef CONFIG_SOC_BUS void omap_soc_device_init(void); @@ -288,6 +292,9 @@ static inline void omap4_cpu_resume(void) #endif +void pdata_quirks_init(struct of_device_id *); +void omap_pcs_legacy_init(int irq, void (*rearm)(void)); + struct omap_sdrc_params; extern void omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0, struct omap_sdrc_params *sdrc_cs1); diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c index 31e0dfe4a4e..44bb4d544dc 100644 --- a/arch/arm/mach-omap2/control.c +++ b/arch/arm/mach-omap2/control.c @@ -46,17 +46,7 @@ struct omap3_scratchpad { struct omap3_scratchpad_prcm_block { u32 prm_clksrc_ctrl; u32 prm_clksel; - u32 cm_clksel_core; - u32 cm_clksel_wkup; - u32 cm_clken_pll; - u32 cm_autoidle_pll; - u32 cm_clksel1_pll; - u32 cm_clksel2_pll; - u32 cm_clksel3_pll; - u32 cm_clken_pll_mpu; - u32 cm_autoidle_pll_mpu; - u32 cm_clksel1_pll_mpu; - u32 cm_clksel2_pll_mpu; + u32 cm_contents[11]; u32 prcm_block_size; }; @@ -347,34 +337,9 @@ void omap3_save_scratchpad_contents(void) prcm_block_contents.prm_clksel = omap2_prm_read_mod_reg(OMAP3430_CCR_MOD, OMAP3_PRM_CLKSEL_OFFSET); - prcm_block_contents.cm_clksel_core = - omap2_cm_read_mod_reg(CORE_MOD, CM_CLKSEL); - prcm_block_contents.cm_clksel_wkup = - omap2_cm_read_mod_reg(WKUP_MOD, CM_CLKSEL); - prcm_block_contents.cm_clken_pll = - omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN); - /* - * As per erratum i671, ROM code does not respect the PER DPLL - * programming scheme if CM_AUTOIDLE_PLL..AUTO_PERIPH_DPLL == 1. - * Then, in anycase, clear these bits to avoid extra latencies. - */ - prcm_block_contents.cm_autoidle_pll = - omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE) & - ~OMAP3430_AUTO_PERIPH_DPLL_MASK; - prcm_block_contents.cm_clksel1_pll = - omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL1_PLL); - prcm_block_contents.cm_clksel2_pll = - omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL2_PLL); - prcm_block_contents.cm_clksel3_pll = - omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL3); - prcm_block_contents.cm_clken_pll_mpu = - omap2_cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKEN_PLL); - prcm_block_contents.cm_autoidle_pll_mpu = - omap2_cm_read_mod_reg(MPU_MOD, OMAP3430_CM_AUTOIDLE_PLL); - prcm_block_contents.cm_clksel1_pll_mpu = - omap2_cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL); - prcm_block_contents.cm_clksel2_pll_mpu = - omap2_cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKSEL2_PLL); + + omap3_cm_save_scratchpad_contents(prcm_block_contents.cm_contents); + prcm_block_contents.prcm_block_size = 0x0; /* Populate the SDRC block contents */ @@ -604,4 +569,15 @@ int omap3_ctrl_save_padconf(void) return 0; } +/** + * omap3_ctrl_set_iva_bootmode_idle - sets the IVA2 bootmode to idle + * + * Sets the bootmode for IVA2 to idle. This is needed by the PM code to + * force disable IVA2 so that it does not prevent any low-power states. + */ +void omap3_ctrl_set_iva_bootmode_idle(void) +{ + omap_ctrl_writel(OMAP3_IVA2_BOOTMOD_IDLE, + OMAP343X_CONTROL_IVA2_BOOTMOD); +} #endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */ diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h index f7d7c2ef1b4..da054801b11 100644 --- a/arch/arm/mach-omap2/control.h +++ b/arch/arm/mach-omap2/control.h @@ -427,6 +427,7 @@ extern void omap_ctrl_write_dsp_boot_addr(u32 bootaddr); extern void omap_ctrl_write_dsp_boot_mode(u8 bootmode); extern void omap3630_ctrl_disable_rta(void); extern int omap3_ctrl_save_padconf(void); +extern void omap3_ctrl_set_iva_bootmode_idle(void); extern void omap2_set_globals_control(void __iomem *ctrl, void __iomem *ctrl_pad); #else diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 5c5315ba129..0dd6398bade 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -19,7 +19,6 @@ #include <linux/of.h> #include <linux/pinctrl/machine.h> #include <linux/platform_data/omap4-keypad.h> -#include <linux/wl12xx.h> #include <linux/platform_data/mailbox-omap.h> #include <asm/mach-types.h> @@ -37,6 +36,7 @@ #include "mux.h" #include "control.h" #include "devices.h" +#include "display.h" #define L3_MODULES_MAX_LEN 12 #define L3_MODULES 3 @@ -466,47 +466,13 @@ static struct platform_device omap_vout_device = { .resource = &omap_vout_resource[0], .id = -1, }; -static void omap_init_vout(void) -{ - if (platform_device_register(&omap_vout_device) < 0) - printk(KERN_ERR "Unable to register OMAP-VOUT device\n"); -} -#else -static inline void omap_init_vout(void) {} -#endif - -#if IS_ENABLED(CONFIG_WL12XX) -static struct wl12xx_platform_data wl12xx __initdata; - -void __init omap_init_wl12xx_of(void) +int __init omap_init_vout(void) { - int ret; - - if (!of_have_populated_dt()) - return; - - if (of_machine_is_compatible("ti,omap4-sdp")) { - wl12xx.board_ref_clock = WL12XX_REFCLOCK_26; - wl12xx.board_tcxo_clock = WL12XX_TCXOCLOCK_26; - wl12xx.irq = gpio_to_irq(53); - } else if (of_machine_is_compatible("ti,omap4-panda")) { - wl12xx.board_ref_clock = WL12XX_REFCLOCK_38; - wl12xx.irq = gpio_to_irq(53); - } else { - return; - } - - ret = wl12xx_set_platform_data(&wl12xx); - if (ret) { - pr_err("error setting wl12xx data: %d\n", ret); - return; - } + return platform_device_register(&omap_vout_device); } #else -static inline void omap_init_wl12xx_of(void) -{ -} +int __init omap_init_vout(void) { return 0; } #endif /*-------------------------------------------------------------------------*/ @@ -531,12 +497,8 @@ static int __init omap2_init_devices(void) omap_init_sham(); omap_init_aes(); omap_init_rng(); - } else { - /* These can be removed when bindings are done */ - omap_init_wl12xx_of(); } omap_init_sti(); - omap_init_vout(); return 0; } diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index 03a0516c7f6..a4e536b11ec 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -416,6 +416,34 @@ int __init omap_display_init(struct omap_dss_board_info *board_data) } } + /* create DRM device */ + r = omap_init_drm(); + if (r < 0) { + pr_err("Unable to register omapdrm device\n"); + return r; + } + + /* create vrfb device */ + r = omap_init_vrfb(); + if (r < 0) { + pr_err("Unable to register omapvrfb device\n"); + return r; + } + + /* create FB device */ + r = omap_init_fb(); + if (r < 0) { + pr_err("Unable to register omapfb device\n"); + return r; + } + + /* create V4L2 display device */ + r = omap_init_vout(); + if (r < 0) { + pr_err("Unable to register omap_vout device\n"); + return r; + } + return 0; } diff --git a/arch/arm/mach-omap2/display.h b/arch/arm/mach-omap2/display.h index b871b017b35..f3d2ce4bc26 100644 --- a/arch/arm/mach-omap2/display.h +++ b/arch/arm/mach-omap2/display.h @@ -26,4 +26,8 @@ struct omap_dss_dispc_dev_attr { bool has_framedonetv_irq; }; +int omap_init_drm(void); +int omap_init_vrfb(void); +int omap_init_fb(void); +int omap_init_vout(void); #endif diff --git a/arch/arm/mach-omap2/drm.c b/arch/arm/mach-omap2/drm.c index 59a4af779f4..facd7406a03 100644 --- a/arch/arm/mach-omap2/drm.c +++ b/arch/arm/mach-omap2/drm.c @@ -26,10 +26,9 @@ #include <linux/platform_data/omap_drm.h> #include "soc.h" -#include "omap_device.h" -#include "omap_hwmod.h" +#include "display.h" -#if defined(CONFIG_DRM_OMAP) || (CONFIG_DRM_OMAP_MODULE) +#if defined(CONFIG_DRM_OMAP) || defined(CONFIG_DRM_OMAP_MODULE) static struct omap_drm_platform_data platform_data; @@ -42,26 +41,13 @@ static struct platform_device omap_drm_device = { .id = 0, }; -static int __init omap_init_drm(void) +int __init omap_init_drm(void) { - struct omap_hwmod *oh = NULL; - struct platform_device *pdev; - - /* lookup and populate the DMM information, if present - OMAP4+ */ - oh = omap_hwmod_lookup("dmm"); - - if (oh) { - pdev = omap_device_build(oh->name, -1, oh, NULL, 0); - WARN(IS_ERR(pdev), "Could not build omap_device for %s\n", - oh->name); - } - platform_data.omaprev = GET_OMAP_TYPE; return platform_device_register(&omap_drm_device); } - -omap_arch_initcall(omap_init_drm); - +#else +int __init omap_init_drm(void) { return 0; } #endif diff --git a/arch/arm/mach-omap2/dss-common.c b/arch/arm/mach-omap2/dss-common.c index bf89effa4c9..365bfd3d9c6 100644 --- a/arch/arm/mach-omap2/dss-common.c +++ b/arch/arm/mach-omap2/dss-common.c @@ -213,3 +213,47 @@ void __init omap_4430sdp_display_init_of(void) platform_device_register(&sdp4430_tpd_device); platform_device_register(&sdp4430_hdmi_connector_device); } + + +/* OMAP3 IGEPv2 data */ + +#define IGEP2_DVI_TFP410_POWER_DOWN_GPIO 170 + +/* DVI Connector */ +static struct connector_dvi_platform_data omap3_igep2_dvi_connector_pdata = { + .name = "dvi", + .source = "tfp410.0", + .i2c_bus_num = 3, +}; + +static struct platform_device omap3_igep2_dvi_connector_device = { + .name = "connector-dvi", + .id = 0, + .dev.platform_data = &omap3_igep2_dvi_connector_pdata, +}; + +/* TFP410 DPI-to-DVI chip */ +static struct encoder_tfp410_platform_data omap3_igep2_tfp410_pdata = { + .name = "tfp410.0", + .source = "dpi.0", + .data_lines = 24, + .power_down_gpio = IGEP2_DVI_TFP410_POWER_DOWN_GPIO, +}; + +static struct platform_device omap3_igep2_tfp410_device = { + .name = "tfp410", + .id = 0, + .dev.platform_data = &omap3_igep2_tfp410_pdata, +}; + +static struct omap_dss_board_info igep2_dss_data = { + .default_display_name = "dvi", +}; + +void __init omap3_igep2_display_init_of(void) +{ + omap_display_init(&igep2_dss_data); + + platform_device_register(&omap3_igep2_tfp410_device); + platform_device_register(&omap3_igep2_dvi_connector_device); +} diff --git a/arch/arm/mach-omap2/dss-common.h b/arch/arm/mach-omap2/dss-common.h index c28fe3c0358..a9becf0d5be 100644 --- a/arch/arm/mach-omap2/dss-common.h +++ b/arch/arm/mach-omap2/dss-common.h @@ -8,5 +8,6 @@ void __init omap4_panda_display_init_of(void); void __init omap_4430sdp_display_init_of(void); +void __init omap3_igep2_display_init_of(void); #endif diff --git a/arch/arm/mach-omap2/fb.c b/arch/arm/mach-omap2/fb.c index 2ca33cc0c48..26e28e94f62 100644 --- a/arch/arm/mach-omap2/fb.c +++ b/arch/arm/mach-omap2/fb.c @@ -32,6 +32,7 @@ #include <asm/mach/map.h> #include "soc.h" +#include "display.h" #ifdef CONFIG_OMAP2_VRFB @@ -64,7 +65,7 @@ static const struct resource omap3_vrfb_resources[] = { DEFINE_RES_MEM_NAMED(0xfc000000u, 0x4000000, "vrfb-area-11"), }; -static int __init omap_init_vrfb(void) +int __init omap_init_vrfb(void) { struct platform_device *pdev; const struct resource *res; @@ -85,8 +86,8 @@ static int __init omap_init_vrfb(void) return PTR_RET(pdev); } - -omap_arch_initcall(omap_init_vrfb); +#else +int __init omap_init_vrfb(void) { return 0; } #endif #if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE) @@ -105,11 +106,10 @@ static struct platform_device omap_fb_device = { .num_resources = 0, }; -static int __init omap_init_fb(void) +int __init omap_init_fb(void) { return platform_device_register(&omap_fb_device); } - -omap_arch_initcall(omap_init_fb); - +#else +int __init omap_init_fb(void) { return 0; } #endif diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 579697adaae..51525faa0ae 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -1521,6 +1521,42 @@ err: return ret; } +/* + * REVISIT: Add timing support from slls644g.pdf + */ +static int gpmc_probe_8250(struct platform_device *pdev, + struct device_node *child) +{ + struct resource res; + unsigned long base; + int ret, cs; + + if (of_property_read_u32(child, "reg", &cs) < 0) { + dev_err(&pdev->dev, "%s has no 'reg' property\n", + child->full_name); + return -ENODEV; + } + + if (of_address_to_resource(child, 0, &res) < 0) { + dev_err(&pdev->dev, "%s has malformed 'reg' property\n", + child->full_name); + return -ENODEV; + } + + ret = gpmc_cs_request(cs, resource_size(&res), &base); + if (ret < 0) { + dev_err(&pdev->dev, "cannot request GPMC CS %d\n", cs); + return ret; + } + + if (of_platform_device_create(child, NULL, &pdev->dev)) + return 0; + + dev_err(&pdev->dev, "failed to create gpmc child %s\n", child->name); + + return -ENODEV; +} + static int gpmc_probe_dt(struct platform_device *pdev) { int ret; @@ -1564,6 +1600,8 @@ static int gpmc_probe_dt(struct platform_device *pdev) else if (of_node_cmp(child->name, "ethernet") == 0 || of_node_cmp(child->name, "nor") == 0) ret = gpmc_probe_generic_child(pdev, child); + else if (of_node_cmp(child->name, "8250") == 0) + ret = gpmc_probe_8250(pdev, child); if (WARN(ret < 0, "%s: probing gpmc child %s failed\n", __func__, child->full_name)) diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 0289adcb6ef..9428c5f9d4f 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -18,6 +18,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/io.h> +#include <linux/random.h> #include <linux/slab.h> #ifdef CONFIG_SOC_BUS @@ -130,6 +131,17 @@ void omap_get_die_id(struct omap_die_id *odi) odi->id_3 = read_tap_reg(OMAP_TAP_DIE_ID_3); } +static int __init omap_feed_randpool(void) +{ + struct omap_die_id odi; + + /* Throw the die ID into the entropy pool at boot */ + omap_get_die_id(&odi); + add_device_randomness(&odi, sizeof(odi)); + return 0; +} +omap_device_initcall(omap_feed_randpool); + void __init omap2xxx_check_revision(void) { int i, j; @@ -576,8 +588,8 @@ void __init omap5xxx_check_revision(void) case 0xb942: switch (rev) { case 0: - omap_revision = OMAP5430_REV_ES1_0; - break; + /* No support for ES1.0 Test chip */ + BUG(); case 1: default: omap_revision = OMAP5430_REV_ES2_0; @@ -587,8 +599,8 @@ void __init omap5xxx_check_revision(void) case 0xb998: switch (rev) { case 0: - omap_revision = OMAP5432_REV_ES1_0; - break; + /* No support for ES1.0 Test chip */ + BUG(); case 1: default: omap_revision = OMAP5432_REV_ES2_0; diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index ff2113ce401..cd22262a2cc 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -583,6 +583,11 @@ void __init am33xx_init_early(void) omap_hwmod_init_postsetup(); omap_clk_init = am33xx_clk_init; } + +void __init am33xx_init_late(void) +{ + omap_common_late_init(); +} #endif #ifdef CONFIG_SOC_AM43XX @@ -594,7 +599,18 @@ void __init am43xx_init_early(void) NULL); omap2_set_globals_prm(AM33XX_L4_WK_IO_ADDRESS(AM43XX_PRCM_BASE)); omap2_set_globals_cm(AM33XX_L4_WK_IO_ADDRESS(AM43XX_PRCM_BASE), NULL); + omap_prm_base_init(); + omap_cm_base_init(); omap3xxx_check_revision(); + am43xx_powerdomains_init(); + am43xx_clockdomains_init(); + am43xx_hwmod_init(); + omap_hwmod_init_postsetup(); +} + +void __init am43xx_init_late(void) +{ + omap_common_late_init(); } #endif @@ -651,6 +667,11 @@ void __init omap5_init_early(void) omap54xx_hwmod_init(); omap_hwmod_init_postsetup(); } + +void __init omap5_init_late(void) +{ + omap_common_late_init(); +} #endif #ifdef CONFIG_SOC_DRA7XX @@ -671,6 +692,11 @@ void __init dra7xx_init_early(void) dra7xx_hwmod_init(); omap_hwmod_init_postsetup(); } + +void __init dra7xx_init_late(void) +{ + omap_common_late_init(); +} #endif diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index 3926f370448..e022a869bff 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -233,7 +233,7 @@ static inline void omap_intc_handle_irq(void __iomem *base_addr, struct pt_regs goto out; irqnr = readl_relaxed(base_addr + 0xd8); -#ifdef CONFIG_SOC_TI81XX +#if IS_ENABLED(CONFIG_SOC_TI81XX) || IS_ENABLED(CONFIG_SOC_AM33XX) if (irqnr) goto out; irqnr = readl_relaxed(base_addr + 0xf8); diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index 5d8768075dd..b4ac3af1160 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -25,6 +25,7 @@ #include "soc.h" #include "omap_device.h" +#include "clock.h" /* * FIXME: Find a mechanism to enable/disable runtime the McBSP ICLK autoidle. @@ -33,22 +34,18 @@ #include "cm3xxx.h" #include "cm-regbits-34xx.h" +static struct clk *mcbsp_iclks[5]; + static int omap3_enable_st_clock(unsigned int id, bool enable) { - unsigned int w; - /* * Sidetone uses McBSP ICLK - which must not idle when sidetones * are enabled or sidetones start sounding ugly. */ - w = omap2_cm_read_mod_reg(OMAP3430_PER_MOD, CM_AUTOIDLE); if (enable) - w &= ~(1 << (id - 2)); + return omap2_clk_deny_idle(mcbsp_iclks[id]); else - w |= 1 << (id - 2); - omap2_cm_write_mod_reg(w, OMAP3430_PER_MOD, CM_AUTOIDLE); - - return 0; + return omap2_clk_allow_idle(mcbsp_iclks[id]); } static int __init omap_init_mcbsp(struct omap_hwmod *oh, void *unused) @@ -58,6 +55,7 @@ static int __init omap_init_mcbsp(struct omap_hwmod *oh, void *unused) struct omap_hwmod *oh_device[2]; struct omap_mcbsp_platform_data *pdata = NULL; struct platform_device *pdev; + char clk_name[11]; sscanf(oh->name, "mcbsp%d", &id); @@ -99,6 +97,8 @@ static int __init omap_init_mcbsp(struct omap_hwmod *oh, void *unused) oh_device[1] = omap_hwmod_lookup(( (struct omap_mcbsp_dev_attr *)(oh->dev_attr))->sidetone); pdata->enable_st_clock = omap3_enable_st_clock; + sprintf(clk_name, "mcbsp%d_ick", id); + mcbsp_iclks[id] = clk_get(NULL, clk_name); count++; } pdev = omap_device_build_ss(name, id, oh_device, count, pdata, diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index f82cf878d6a..48094b58c88 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -811,6 +811,12 @@ int __init omap_mux_late_init(void) } } + omap_mux_dbg_init(); + + /* see pinctrl-single-omap for the wake-up interrupt handling */ + if (of_have_populated_dt()) + return 0; + ret = request_irq(omap_prcm_event_to_irq("io"), omap_hwmod_mux_handle_irq, IRQF_SHARED | IRQF_NO_SUSPEND, "hwmod_io", omap_mux_late_init); @@ -818,8 +824,6 @@ int __init omap_mux_late_init(void) if (ret) pr_warning("mux: Failed to setup hwmod io irq %d\n", ret); - omap_mux_dbg_init(); - return 0; } diff --git a/arch/arm/mach-omap2/omap-secure.c b/arch/arm/mach-omap2/omap-secure.c index b970440cffc..5ac122e88f6 100644 --- a/arch/arm/mach-omap2/omap-secure.c +++ b/arch/arm/mach-omap2/omap-secure.c @@ -3,6 +3,8 @@ * * Copyright (C) 2011 Texas Instruments, Inc. * Santosh Shilimkar <santosh.shilimkar@ti.com> + * Copyright (C) 2012 Ivaylo Dimitrov <freemangordon@abv.bg> + * Copyright (C) 2013 Pali Rohár <pali.rohar@gmail.com> * * * This program is free software,you can redistribute it and/or modify @@ -70,3 +72,77 @@ phys_addr_t omap_secure_ram_mempool_base(void) { return omap_secure_memblock_base; } + +/** + * rx51_secure_dispatcher: Routine to dispatch secure PPA API calls + * @idx: The PPA API index + * @process: Process ID + * @flag: The flag indicating criticality of operation + * @nargs: Number of valid arguments out of four. + * @arg1, arg2, arg3 args4: Parameters passed to secure API + * + * Return the non-zero error value on failure. + * + * NOTE: rx51_secure_dispatcher differs from omap_secure_dispatcher because + * it calling omap_smc3() instead omap_smc2() and param[0] is nargs+1 + */ +u32 rx51_secure_dispatcher(u32 idx, u32 process, u32 flag, u32 nargs, + u32 arg1, u32 arg2, u32 arg3, u32 arg4) +{ + u32 ret; + u32 param[5]; + + param[0] = nargs+1; /* RX-51 needs number of arguments + 1 */ + param[1] = arg1; + param[2] = arg2; + param[3] = arg3; + param[4] = arg4; + + /* + * Secure API needs physical address + * pointer for the parameters + */ + local_irq_disable(); + local_fiq_disable(); + flush_cache_all(); + outer_clean_range(__pa(param), __pa(param + 5)); + ret = omap_smc3(idx, process, flag, __pa(param)); + flush_cache_all(); + local_fiq_enable(); + local_irq_enable(); + + return ret; +} + +/** + * rx51_secure_update_aux_cr: Routine to modify the contents of Auxiliary Control Register + * @set_bits: bits to set in ACR + * @clr_bits: bits to clear in ACR + * + * Return the non-zero error value on failure. +*/ +u32 rx51_secure_update_aux_cr(u32 set_bits, u32 clear_bits) +{ + u32 acr; + + /* Read ACR */ + asm volatile ("mrc p15, 0, %0, c1, c0, 1" : "=r" (acr)); + acr &= ~clear_bits; + acr |= set_bits; + + return rx51_secure_dispatcher(RX51_PPA_WRITE_ACR, + 0, + FLAG_START_CRITICAL, + 1, acr, 0, 0, 0); +} + +/** + * rx51_secure_rng_call: Routine for HW random generator + */ +u32 rx51_secure_rng_call(u32 ptr, u32 count, u32 flag) +{ + return rx51_secure_dispatcher(RX51_PPA_HWRNG, + 0, + NO_FLAG, + 3, ptr, count, flag, 0); +} diff --git a/arch/arm/mach-omap2/omap-secure.h b/arch/arm/mach-omap2/omap-secure.h index 0e729170c46..8cc7d331437 100644 --- a/arch/arm/mach-omap2/omap-secure.h +++ b/arch/arm/mach-omap2/omap-secure.h @@ -3,6 +3,8 @@ * * Copyright (C) 2011 Texas Instruments, Inc. * Santosh Shilimkar <santosh.shilimkar@ti.com> + * Copyright (C) 2012 Ivaylo Dimitrov <freemangordon@abv.bg> + * Copyright (C) 2013 Pali Rohár <pali.rohar@gmail.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -42,23 +44,38 @@ #define OMAP4_MON_L2X0_AUXCTRL_INDEX 0x109 #define OMAP4_MON_L2X0_PREFETCH_INDEX 0x113 +#define OMAP5_DRA7_MON_SET_CNTFRQ_INDEX 0x109 + /* Secure PPA(Primary Protected Application) APIs */ #define OMAP4_PPA_L2_POR_INDEX 0x23 #define OMAP4_PPA_CPU_ACTRL_SMP_INDEX 0x25 +/* Secure RX-51 PPA (Primary Protected Application) APIs */ +#define RX51_PPA_HWRNG 29 +#define RX51_PPA_L2_INVAL 40 +#define RX51_PPA_WRITE_ACR 42 + #ifndef __ASSEMBLER__ extern u32 omap_secure_dispatcher(u32 idx, u32 flag, u32 nargs, u32 arg1, u32 arg2, u32 arg3, u32 arg4); extern u32 omap_smc2(u32 id, u32 falg, u32 pargs); +extern u32 omap_smc3(u32 id, u32 process, u32 flag, u32 pargs); extern phys_addr_t omap_secure_ram_mempool_base(void); extern int omap_secure_ram_reserve_memblock(void); +extern u32 rx51_secure_dispatcher(u32 idx, u32 process, u32 flag, u32 nargs, + u32 arg1, u32 arg2, u32 arg3, u32 arg4); +extern u32 rx51_secure_update_aux_cr(u32 set_bits, u32 clear_bits); +extern u32 rx51_secure_rng_call(u32 ptr, u32 count, u32 flag); + #ifdef CONFIG_OMAP4_ERRATA_I688 extern int omap_barrier_reserve_memblock(void); #else static inline void omap_barrier_reserve_memblock(void) { } #endif + +void set_cntfreq(void); #endif /* __ASSEMBLER__ */ #endif /* OMAP_ARCH_OMAP_SECURE_H */ diff --git a/arch/arm/mach-omap2/omap-smc.S b/arch/arm/mach-omap2/omap-smc.S index f6441c13cd8..fd90125bffc 100644 --- a/arch/arm/mach-omap2/omap-smc.S +++ b/arch/arm/mach-omap2/omap-smc.S @@ -1,9 +1,11 @@ /* - * OMAP44xx secure APIs file. + * OMAP34xx and OMAP44xx secure APIs file. * * Copyright (C) 2010 Texas Instruments, Inc. * Written by Santosh Shilimkar <santosh.shilimkar@ti.com> * + * Copyright (C) 2012 Ivaylo Dimitrov <freemangordon@abv.bg> + * Copyright (C) 2013 Pali Rohár <pali.rohar@gmail.com> * * This program is free software,you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -54,6 +56,23 @@ ENTRY(omap_smc2) ldmfd sp!, {r4-r12, pc} ENDPROC(omap_smc2) +/** + * u32 omap_smc3(u32 service_id, u32 process_id, u32 flag, u32 pargs) + * Low level common routine for secure HAL and PPA APIs via smc #1 + * r0 - @service_id: Secure Service ID + * r1 - @process_id: Process ID + * r2 - @flag: Flag to indicate the criticality of operation + * r3 - @pargs: Physical address of parameter list + */ +ENTRY(omap_smc3) + stmfd sp!, {r4-r11, lr} + mov r12, r0 @ Copy the secure service ID + mov r6, #0xff @ Indicate new Task call + dsb @ Memory Barrier (not sure if needed, copied from omap_smc2) + smc #1 @ Call PPA service + ldmfd sp!, {r4-r11, pc} +ENDPROC(omap_smc3) + ENTRY(omap_modify_auxcoreboot0) stmfd sp!, {r1-r12, lr} ldr r12, =0x104 diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c index 89121109329..75e95d4fb44 100644 --- a/arch/arm/mach-omap2/omap-smp.c +++ b/arch/arm/mach-omap2/omap-smp.c @@ -66,6 +66,13 @@ static void omap4_secondary_init(unsigned int cpu) 4, 0, 0, 0, 0, 0); /* + * Configure the CNTFRQ register for the secondary cpu's which + * indicates the frequency of the cpu local timers. + */ + if (soc_is_omap54xx() || soc_is_dra7xx()) + set_cntfreq(); + + /* * Synchronise with the boot thread. */ spin_lock(&boot_lock); diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c index 813c61558a5..3664562f914 100644 --- a/arch/arm/mach-omap2/omap-wakeupgen.c +++ b/arch/arm/mach-omap2/omap-wakeupgen.c @@ -33,8 +33,12 @@ #include "omap4-sar-layout.h" #include "common.h" -#define MAX_NR_REG_BANKS 5 -#define MAX_IRQS 160 +#define AM43XX_NR_REG_BANKS 7 +#define AM43XX_IRQS 224 +#define MAX_NR_REG_BANKS AM43XX_NR_REG_BANKS +#define MAX_IRQS AM43XX_IRQS +#define DEFAULT_NR_REG_BANKS 5 +#define DEFAULT_IRQS 160 #define WKG_MASK_ALL 0x00000000 #define WKG_UNMASK_ALL 0xffffffff #define CPU_ENA_OFFSET 0x400 @@ -47,8 +51,8 @@ static void __iomem *wakeupgen_base; static void __iomem *sar_base; static DEFINE_RAW_SPINLOCK(wakeupgen_lock); static unsigned int irq_target_cpu[MAX_IRQS]; -static unsigned int irq_banks = MAX_NR_REG_BANKS; -static unsigned int max_irqs = MAX_IRQS; +static unsigned int irq_banks = DEFAULT_NR_REG_BANKS; +static unsigned int max_irqs = DEFAULT_IRQS; static unsigned int omap_secure_apis; /* @@ -418,12 +422,16 @@ int __init omap_wakeupgen_init(void) irq_banks = OMAP4_NR_BANKS; max_irqs = OMAP4_NR_IRQS; omap_secure_apis = 1; + } else if (soc_is_am43xx()) { + irq_banks = AM43XX_NR_REG_BANKS; + max_irqs = AM43XX_IRQS; } /* Clear all IRQ bitmasks at wakeupGen level */ for (i = 0; i < irq_banks; i++) { wakeupgen_writel(0, i, CPU0_ID); - wakeupgen_writel(0, i, CPU1_ID); + if (!soc_is_am43xx()) + wakeupgen_writel(0, i, CPU1_ID); } /* diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index d9ee0ff094d..e3f0ecaf87d 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -2357,25 +2357,29 @@ static struct device_node *of_dev_hwmod_lookup(struct device_node *np, /** * _init_mpu_rt_base - populate the virtual address for a hwmod * @oh: struct omap_hwmod * to locate the virtual address + * @data: (unused, caller should pass NULL) + * @np: struct device_node * of the IP block's device node in the DT data * * Cache the virtual address used by the MPU to access this IP block's * registers. This address is needed early so the OCP registers that * are part of the device's address space can be ioremapped properly. - * No return value. + * + * Returns 0 on success, -EINVAL if an invalid hwmod is passed, and + * -ENXIO on absent or invalid register target address space. */ -static void __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data) +static int __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data, + struct device_node *np) { struct omap_hwmod_addr_space *mem; void __iomem *va_start = NULL; - struct device_node *np; if (!oh) - return; + return -EINVAL; _save_mpu_port_index(oh); if (oh->_int_flags & _HWMOD_NO_MPU_PORT) - return; + return -ENXIO; mem = _find_mpu_rt_addr_space(oh); if (!mem) { @@ -2383,25 +2387,24 @@ static void __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data) oh->name); /* Extract the IO space from device tree blob */ - if (!of_have_populated_dt()) - return; + if (!np) + return -ENXIO; - np = of_dev_hwmod_lookup(of_find_node_by_name(NULL, "ocp"), oh); - if (np) - va_start = of_iomap(np, oh->mpu_rt_idx); + va_start = of_iomap(np, oh->mpu_rt_idx); } else { va_start = ioremap(mem->pa_start, mem->pa_end - mem->pa_start); } if (!va_start) { pr_err("omap_hwmod: %s: Could not ioremap\n", oh->name); - return; + return -ENXIO; } pr_debug("omap_hwmod: %s: MPU register target at va %p\n", oh->name, va_start); oh->_mpu_rt_va = va_start; + return 0; } /** @@ -2414,18 +2417,28 @@ static void __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data) * registered at this point. This is the first of two phases for * hwmod initialization. Code called here does not touch any hardware * registers, it simply prepares internal data structures. Returns 0 - * upon success or if the hwmod isn't registered, or -EINVAL upon - * failure. + * upon success or if the hwmod isn't registered or if the hwmod's + * address space is not defined, or -EINVAL upon failure. */ static int __init _init(struct omap_hwmod *oh, void *data) { int r; + struct device_node *np = NULL; if (oh->_state != _HWMOD_STATE_REGISTERED) return 0; - if (oh->class->sysc) - _init_mpu_rt_base(oh, NULL); + if (of_have_populated_dt()) + np = of_dev_hwmod_lookup(of_find_node_by_name(NULL, "ocp"), oh); + + if (oh->class->sysc) { + r = _init_mpu_rt_base(oh, NULL, np); + if (r < 0) { + WARN(1, "omap_hwmod: %s: doesn't have mpu register target base\n", + oh->name); + return 0; + } + } r = _init_clocks(oh, NULL); if (r < 0) { @@ -2433,6 +2446,12 @@ static int __init _init(struct omap_hwmod *oh, void *data) return -EINVAL; } + if (np) + if (of_find_property(np, "ti,no-reset-on-init", NULL)) + oh->flags |= HWMOD_INIT_NO_RESET; + if (of_find_property(np, "ti,no-idle-on-init", NULL)) + oh->flags |= HWMOD_INIT_NO_IDLE; + oh->_state = _HWMOD_STATE_INITIALIZED; return 0; @@ -4125,6 +4144,14 @@ void __init omap_hwmod_init(void) soc_ops.init_clkdm = _init_clkdm; soc_ops.update_context_lost = _omap4_update_context_lost; soc_ops.get_context_lost = _omap4_get_context_lost; + } else if (soc_is_am43xx()) { + soc_ops.enable_module = _omap4_enable_module; + soc_ops.disable_module = _omap4_disable_module; + soc_ops.wait_target_ready = _omap4_wait_target_ready; + soc_ops.assert_hardreset = _omap4_assert_hardreset; + soc_ops.deassert_hardreset = _omap4_deassert_hardreset; + soc_ops.is_hardreset_asserted = _omap4_is_hardreset_asserted; + soc_ops.init_clkdm = _init_clkdm; } else if (soc_is_am33xx()) { soc_ops.enable_module = _am33xx_enable_module; soc_ops.disable_module = _am33xx_disable_module; diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index d02acf9308d..0f97d635ff9 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -752,6 +752,7 @@ extern int omap44xx_hwmod_init(void); extern int omap54xx_hwmod_init(void); extern int am33xx_hwmod_init(void); extern int dra7xx_hwmod_init(void); +int am43xx_hwmod_init(void); extern int __init omap_hwmod_register_links(struct omap_hwmod_ocp_if **ois); diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h new file mode 100644 index 00000000000..130332c0534 --- /dev/null +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h @@ -0,0 +1,163 @@ +/* + * + * Copyright (C) 2013 Texas Instruments Incorporated + * + * Data common for AM335x and AM43x + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __ARCH_ARM_MACH_OMAP2_OMAP_HWMOD_33XX_43XX_COMMON_DATA_H +#define __ARCH_ARM_MACH_OMAP2_OMAP_HWMOD_33XX_43XX_COMMON_DATA_H + +extern struct omap_hwmod_ocp_if am33xx_mpu__l3_main; +extern struct omap_hwmod_ocp_if am33xx_l3_main__l3_s; +extern struct omap_hwmod_ocp_if am33xx_l3_s__l4_ls; +extern struct omap_hwmod_ocp_if am33xx_l3_s__l4_wkup; +extern struct omap_hwmod_ocp_if am33xx_l3_main__l3_instr; +extern struct omap_hwmod_ocp_if am33xx_mpu__prcm; +extern struct omap_hwmod_ocp_if am33xx_l3_s__l3_main; +extern struct omap_hwmod_ocp_if am33xx_pruss__l3_main; +extern struct omap_hwmod_ocp_if am33xx_gfx__l3_main; +extern struct omap_hwmod_ocp_if am33xx_l3_main__gfx; +extern struct omap_hwmod_ocp_if am33xx_l4_wkup__rtc; +extern struct omap_hwmod_ocp_if am33xx_l4_per__dcan0; +extern struct omap_hwmod_ocp_if am33xx_l4_per__dcan1; +extern struct omap_hwmod_ocp_if am33xx_l4_per__gpio1; +extern struct omap_hwmod_ocp_if am33xx_l4_per__gpio2; +extern struct omap_hwmod_ocp_if am33xx_l4_per__gpio3; +extern struct omap_hwmod_ocp_if am33xx_cpgmac0__mdio; +extern struct omap_hwmod_ocp_if am33xx_l4_ls__elm; +extern struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss0; +extern struct omap_hwmod_ocp_if am33xx_epwmss0__ecap0; +extern struct omap_hwmod_ocp_if am33xx_epwmss0__eqep0; +extern struct omap_hwmod_ocp_if am33xx_epwmss0__ehrpwm0; +extern struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss1; +extern struct omap_hwmod_ocp_if am33xx_epwmss1__ecap1; +extern struct omap_hwmod_ocp_if am33xx_epwmss1__eqep1; +extern struct omap_hwmod_ocp_if am33xx_epwmss1__ehrpwm1; +extern struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss2; +extern struct omap_hwmod_ocp_if am33xx_epwmss2__ecap2; +extern struct omap_hwmod_ocp_if am33xx_epwmss2__eqep2; +extern struct omap_hwmod_ocp_if am33xx_epwmss2__ehrpwm2; +extern struct omap_hwmod_ocp_if am33xx_l3_s__gpmc; +extern struct omap_hwmod_ocp_if am33xx_l4_per__i2c2; +extern struct omap_hwmod_ocp_if am33xx_l4_per__i2c3; +extern struct omap_hwmod_ocp_if am33xx_l4_per__mailbox; +extern struct omap_hwmod_ocp_if am33xx_l4_ls__spinlock; +extern struct omap_hwmod_ocp_if am33xx_l4_ls__mcasp0; +extern struct omap_hwmod_ocp_if am33xx_l4_ls__mcasp1; +extern struct omap_hwmod_ocp_if am33xx_l4_ls__mmc0; +extern struct omap_hwmod_ocp_if am33xx_l4_ls__mmc1; +extern struct omap_hwmod_ocp_if am33xx_l3_s__mmc2; +extern struct omap_hwmod_ocp_if am33xx_l4_ls__mcspi0; +extern struct omap_hwmod_ocp_if am33xx_l4_ls__mcspi1; +extern struct omap_hwmod_ocp_if am33xx_l4_ls__timer2; +extern struct omap_hwmod_ocp_if am33xx_l4_ls__timer3; +extern struct omap_hwmod_ocp_if am33xx_l4_ls__timer4; +extern struct omap_hwmod_ocp_if am33xx_l4_ls__timer5; +extern struct omap_hwmod_ocp_if am33xx_l4_ls__timer6; +extern struct omap_hwmod_ocp_if am33xx_l4_ls__timer7; +extern struct omap_hwmod_ocp_if am33xx_l3_main__tpcc; +extern struct omap_hwmod_ocp_if am33xx_l3_main__tptc0; +extern struct omap_hwmod_ocp_if am33xx_l3_main__tptc1; +extern struct omap_hwmod_ocp_if am33xx_l3_main__tptc2; +extern struct omap_hwmod_ocp_if am33xx_l4_ls__uart2; +extern struct omap_hwmod_ocp_if am33xx_l4_ls__uart3; +extern struct omap_hwmod_ocp_if am33xx_l4_ls__uart4; +extern struct omap_hwmod_ocp_if am33xx_l4_ls__uart5; +extern struct omap_hwmod_ocp_if am33xx_l4_ls__uart6; +extern struct omap_hwmod_ocp_if am33xx_l3_main__ocmc; +extern struct omap_hwmod_ocp_if am33xx_l3_main__sha0; +extern struct omap_hwmod_ocp_if am33xx_l3_main__aes0; + +extern struct omap_hwmod am33xx_l3_main_hwmod; +extern struct omap_hwmod am33xx_l3_s_hwmod; +extern struct omap_hwmod am33xx_l3_instr_hwmod; +extern struct omap_hwmod am33xx_l4_ls_hwmod; +extern struct omap_hwmod am33xx_l4_wkup_hwmod; +extern struct omap_hwmod am33xx_mpu_hwmod; +extern struct omap_hwmod am33xx_pruss_hwmod; +extern struct omap_hwmod am33xx_gfx_hwmod; +extern struct omap_hwmod am33xx_prcm_hwmod; +extern struct omap_hwmod am33xx_aes0_hwmod; +extern struct omap_hwmod am33xx_sha0_hwmod; +extern struct omap_hwmod am33xx_ocmcram_hwmod; +extern struct omap_hwmod am33xx_smartreflex0_hwmod; +extern struct omap_hwmod am33xx_smartreflex1_hwmod; +extern struct omap_hwmod am33xx_cpgmac0_hwmod; +extern struct omap_hwmod am33xx_mdio_hwmod; +extern struct omap_hwmod am33xx_dcan0_hwmod; +extern struct omap_hwmod am33xx_dcan1_hwmod; +extern struct omap_hwmod am33xx_elm_hwmod; +extern struct omap_hwmod am33xx_epwmss0_hwmod; +extern struct omap_hwmod am33xx_ecap0_hwmod; +extern struct omap_hwmod am33xx_eqep0_hwmod; +extern struct omap_hwmod am33xx_ehrpwm0_hwmod; +extern struct omap_hwmod am33xx_epwmss1_hwmod; +extern struct omap_hwmod am33xx_ecap1_hwmod; +extern struct omap_hwmod am33xx_eqep1_hwmod; +extern struct omap_hwmod am33xx_ehrpwm1_hwmod; +extern struct omap_hwmod am33xx_epwmss2_hwmod; +extern struct omap_hwmod am33xx_ecap2_hwmod; +extern struct omap_hwmod am33xx_eqep2_hwmod; +extern struct omap_hwmod am33xx_ehrpwm2_hwmod; +extern struct omap_hwmod am33xx_gpio1_hwmod; +extern struct omap_hwmod am33xx_gpio2_hwmod; +extern struct omap_hwmod am33xx_gpio3_hwmod; +extern struct omap_hwmod am33xx_gpmc_hwmod; +extern struct omap_hwmod am33xx_i2c1_hwmod; +extern struct omap_hwmod am33xx_i2c2_hwmod; +extern struct omap_hwmod am33xx_i2c3_hwmod; +extern struct omap_hwmod am33xx_mailbox_hwmod; +extern struct omap_hwmod am33xx_mcasp0_hwmod; +extern struct omap_hwmod am33xx_mcasp1_hwmod; +extern struct omap_hwmod am33xx_mmc0_hwmod; +extern struct omap_hwmod am33xx_mmc1_hwmod; +extern struct omap_hwmod am33xx_mmc2_hwmod; +extern struct omap_hwmod am33xx_rtc_hwmod; +extern struct omap_hwmod am33xx_spi0_hwmod; +extern struct omap_hwmod am33xx_spi1_hwmod; +extern struct omap_hwmod am33xx_spinlock_hwmod; +extern struct omap_hwmod am33xx_timer1_hwmod; +extern struct omap_hwmod am33xx_timer2_hwmod; +extern struct omap_hwmod am33xx_timer3_hwmod; +extern struct omap_hwmod am33xx_timer4_hwmod; +extern struct omap_hwmod am33xx_timer5_hwmod; +extern struct omap_hwmod am33xx_timer6_hwmod; +extern struct omap_hwmod am33xx_timer7_hwmod; +extern struct omap_hwmod am33xx_tpcc_hwmod; +extern struct omap_hwmod am33xx_tptc0_hwmod; +extern struct omap_hwmod am33xx_tptc1_hwmod; +extern struct omap_hwmod am33xx_tptc2_hwmod; +extern struct omap_hwmod am33xx_uart1_hwmod; +extern struct omap_hwmod am33xx_uart2_hwmod; +extern struct omap_hwmod am33xx_uart3_hwmod; +extern struct omap_hwmod am33xx_uart4_hwmod; +extern struct omap_hwmod am33xx_uart5_hwmod; +extern struct omap_hwmod am33xx_uart6_hwmod; +extern struct omap_hwmod am33xx_wd_timer1_hwmod; + +extern struct omap_hwmod_class am33xx_l4_hwmod_class; +extern struct omap_hwmod_class am33xx_wkup_m3_hwmod_class; +extern struct omap_hwmod_class am33xx_control_hwmod_class; +extern struct omap_hwmod_class am33xx_gpio_hwmod_class; +extern struct omap_hwmod_class am33xx_timer_hwmod_class; +extern struct omap_hwmod_class am33xx_epwmss_hwmod_class; +extern struct omap_hwmod_class am33xx_ehrpwm_hwmod_class; +extern struct omap_hwmod_class am33xx_spi_hwmod_class; + +extern struct omap_gpio_dev_attr gpio_dev_attr; +extern struct omap2_mcspi_dev_attr mcspi_attrib; + +void omap_hwmod_am33xx_reg(void); +void omap_hwmod_am43xx_reg(void); + +#endif diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c new file mode 100644 index 00000000000..e2db378b849 --- /dev/null +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c @@ -0,0 +1,643 @@ +/* + * + * Copyright (C) 2013 Texas Instruments Incorporated + * + * Interconnects common for AM335x and AM43x + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/sizes.h> +#include "omap_hwmod.h" +#include "omap_hwmod_33xx_43xx_common_data.h" + +/* mpu -> l3 main */ +struct omap_hwmod_ocp_if am33xx_mpu__l3_main = { + .master = &am33xx_mpu_hwmod, + .slave = &am33xx_l3_main_hwmod, + .clk = "dpll_mpu_m2_ck", + .user = OCP_USER_MPU, +}; + +/* l3 main -> l3 s */ +struct omap_hwmod_ocp_if am33xx_l3_main__l3_s = { + .master = &am33xx_l3_main_hwmod, + .slave = &am33xx_l3_s_hwmod, + .clk = "l3s_gclk", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l3 s -> l4 per/ls */ +struct omap_hwmod_ocp_if am33xx_l3_s__l4_ls = { + .master = &am33xx_l3_s_hwmod, + .slave = &am33xx_l4_ls_hwmod, + .clk = "l3s_gclk", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l3 s -> l4 wkup */ +struct omap_hwmod_ocp_if am33xx_l3_s__l4_wkup = { + .master = &am33xx_l3_s_hwmod, + .slave = &am33xx_l4_wkup_hwmod, + .clk = "l3s_gclk", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l3 main -> l3 instr */ +struct omap_hwmod_ocp_if am33xx_l3_main__l3_instr = { + .master = &am33xx_l3_main_hwmod, + .slave = &am33xx_l3_instr_hwmod, + .clk = "l3s_gclk", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* mpu -> prcm */ +struct omap_hwmod_ocp_if am33xx_mpu__prcm = { + .master = &am33xx_mpu_hwmod, + .slave = &am33xx_prcm_hwmod, + .clk = "dpll_mpu_m2_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l3 s -> l3 main*/ +struct omap_hwmod_ocp_if am33xx_l3_s__l3_main = { + .master = &am33xx_l3_s_hwmod, + .slave = &am33xx_l3_main_hwmod, + .clk = "l3s_gclk", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* pru-icss -> l3 main */ +struct omap_hwmod_ocp_if am33xx_pruss__l3_main = { + .master = &am33xx_pruss_hwmod, + .slave = &am33xx_l3_main_hwmod, + .clk = "l3_gclk", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* gfx -> l3 main */ +struct omap_hwmod_ocp_if am33xx_gfx__l3_main = { + .master = &am33xx_gfx_hwmod, + .slave = &am33xx_l3_main_hwmod, + .clk = "dpll_core_m4_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l3 main -> gfx */ +struct omap_hwmod_ocp_if am33xx_l3_main__gfx = { + .master = &am33xx_l3_main_hwmod, + .slave = &am33xx_gfx_hwmod, + .clk = "dpll_core_m4_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4 wkup -> rtc */ +struct omap_hwmod_ocp_if am33xx_l4_wkup__rtc = { + .master = &am33xx_l4_wkup_hwmod, + .slave = &am33xx_rtc_hwmod, + .clk = "clkdiv32k_ick", + .user = OCP_USER_MPU, +}; + +/* l4 per/ls -> DCAN0 */ +struct omap_hwmod_ocp_if am33xx_l4_per__dcan0 = { + .master = &am33xx_l4_ls_hwmod, + .slave = &am33xx_dcan0_hwmod, + .clk = "l4ls_gclk", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4 per/ls -> DCAN1 */ +struct omap_hwmod_ocp_if am33xx_l4_per__dcan1 = { + .master = &am33xx_l4_ls_hwmod, + .slave = &am33xx_dcan1_hwmod, + .clk = "l4ls_gclk", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4 per/ls -> GPIO2 */ +struct omap_hwmod_ocp_if am33xx_l4_per__gpio1 = { + .master = &am33xx_l4_ls_hwmod, + .slave = &am33xx_gpio1_hwmod, + .clk = "l4ls_gclk", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4 per/ls -> gpio3 */ +struct omap_hwmod_ocp_if am33xx_l4_per__gpio2 = { + .master = &am33xx_l4_ls_hwmod, + .slave = &am33xx_gpio2_hwmod, + .clk = "l4ls_gclk", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4 per/ls -> gpio4 */ +struct omap_hwmod_ocp_if am33xx_l4_per__gpio3 = { + .master = &am33xx_l4_ls_hwmod, + .slave = &am33xx_gpio3_hwmod, + .clk = "l4ls_gclk", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +struct omap_hwmod_ocp_if am33xx_cpgmac0__mdio = { + .master = &am33xx_cpgmac0_hwmod, + .slave = &am33xx_mdio_hwmod, + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_addr_space am33xx_elm_addr_space[] = { + { + .pa_start = 0x48080000, + .pa_end = 0x48080000 + SZ_8K - 1, + .flags = ADDR_TYPE_RT + }, + { } +}; + +struct omap_hwmod_ocp_if am33xx_l4_ls__elm = { + .master = &am33xx_l4_ls_hwmod, + .slave = &am33xx_elm_hwmod, + .clk = "l4ls_gclk", + .addr = am33xx_elm_addr_space, + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_addr_space am33xx_epwmss0_addr_space[] = { + { + .pa_start = 0x48300000, + .pa_end = 0x48300000 + SZ_16 - 1, + .flags = ADDR_TYPE_RT + }, + { } +}; + +struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss0 = { + .master = &am33xx_l4_ls_hwmod, + .slave = &am33xx_epwmss0_hwmod, + .clk = "l4ls_gclk", + .addr = am33xx_epwmss0_addr_space, + .user = OCP_USER_MPU, +}; + +struct omap_hwmod_ocp_if am33xx_epwmss0__ecap0 = { + .master = &am33xx_epwmss0_hwmod, + .slave = &am33xx_ecap0_hwmod, + .clk = "l4ls_gclk", + .user = OCP_USER_MPU, +}; + +struct omap_hwmod_ocp_if am33xx_epwmss0__eqep0 = { + .master = &am33xx_epwmss0_hwmod, + .slave = &am33xx_eqep0_hwmod, + .clk = "l4ls_gclk", + .user = OCP_USER_MPU, +}; + +struct omap_hwmod_ocp_if am33xx_epwmss0__ehrpwm0 = { + .master = &am33xx_epwmss0_hwmod, + .slave = &am33xx_ehrpwm0_hwmod, + .clk = "l4ls_gclk", + .user = OCP_USER_MPU, +}; + + +static struct omap_hwmod_addr_space am33xx_epwmss1_addr_space[] = { + { + .pa_start = 0x48302000, + .pa_end = 0x48302000 + SZ_16 - 1, + .flags = ADDR_TYPE_RT + }, + { } +}; + +struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss1 = { + .master = &am33xx_l4_ls_hwmod, + .slave = &am33xx_epwmss1_hwmod, + .clk = "l4ls_gclk", + .addr = am33xx_epwmss1_addr_space, + .user = OCP_USER_MPU, +}; + +struct omap_hwmod_ocp_if am33xx_epwmss1__ecap1 = { + .master = &am33xx_epwmss1_hwmod, + .slave = &am33xx_ecap1_hwmod, + .clk = "l4ls_gclk", + .user = OCP_USER_MPU, +}; + +struct omap_hwmod_ocp_if am33xx_epwmss1__eqep1 = { + .master = &am33xx_epwmss1_hwmod, + .slave = &am33xx_eqep1_hwmod, + .clk = "l4ls_gclk", + .user = OCP_USER_MPU, +}; + +struct omap_hwmod_ocp_if am33xx_epwmss1__ehrpwm1 = { + .master = &am33xx_epwmss1_hwmod, + .slave = &am33xx_ehrpwm1_hwmod, + .clk = "l4ls_gclk", + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_addr_space am33xx_epwmss2_addr_space[] = { + { + .pa_start = 0x48304000, + .pa_end = 0x48304000 + SZ_16 - 1, + .flags = ADDR_TYPE_RT + }, + { } +}; + +struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss2 = { + .master = &am33xx_l4_ls_hwmod, + .slave = &am33xx_epwmss2_hwmod, + .clk = "l4ls_gclk", + .addr = am33xx_epwmss2_addr_space, + .user = OCP_USER_MPU, +}; + +struct omap_hwmod_ocp_if am33xx_epwmss2__ecap2 = { + .master = &am33xx_epwmss2_hwmod, + .slave = &am33xx_ecap2_hwmod, + .clk = "l4ls_gclk", + .user = OCP_USER_MPU, +}; + +struct omap_hwmod_ocp_if am33xx_epwmss2__eqep2 = { + .master = &am33xx_epwmss2_hwmod, + .slave = &am33xx_eqep2_hwmod, + .clk = "l4ls_gclk", + .user = OCP_USER_MPU, +}; + +struct omap_hwmod_ocp_if am33xx_epwmss2__ehrpwm2 = { + .master = &am33xx_epwmss2_hwmod, + .slave = &am33xx_ehrpwm2_hwmod, + .clk = "l4ls_gclk", + .user = OCP_USER_MPU, +}; + +/* l3s cfg -> gpmc */ +static struct omap_hwmod_addr_space am33xx_gpmc_addr_space[] = { + { + .pa_start = 0x50000000, + .pa_end = 0x50000000 + SZ_8K - 1, + .flags = ADDR_TYPE_RT, + }, + { } +}; + +struct omap_hwmod_ocp_if am33xx_l3_s__gpmc = { + .master = &am33xx_l3_s_hwmod, + .slave = &am33xx_gpmc_hwmod, + .clk = "l3s_gclk", + .addr = am33xx_gpmc_addr_space, + .user = OCP_USER_MPU, +}; + +/* i2c2 */ +struct omap_hwmod_ocp_if am33xx_l4_per__i2c2 = { + .master = &am33xx_l4_ls_hwmod, + .slave = &am33xx_i2c2_hwmod, + .clk = "l4ls_gclk", + .user = OCP_USER_MPU, +}; + +struct omap_hwmod_ocp_if am33xx_l4_per__i2c3 = { + .master = &am33xx_l4_ls_hwmod, + .slave = &am33xx_i2c3_hwmod, + .clk = "l4ls_gclk", + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_addr_space am33xx_mailbox_addrs[] = { + { + .pa_start = 0x480C8000, + .pa_end = 0x480C8000 + (SZ_4K - 1), + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4 ls -> mailbox */ +struct omap_hwmod_ocp_if am33xx_l4_per__mailbox = { + .master = &am33xx_l4_ls_hwmod, + .slave = &am33xx_mailbox_hwmod, + .clk = "l4ls_gclk", + .addr = am33xx_mailbox_addrs, + .user = OCP_USER_MPU, +}; + +/* l4 ls -> spinlock */ +struct omap_hwmod_ocp_if am33xx_l4_ls__spinlock = { + .master = &am33xx_l4_ls_hwmod, + .slave = &am33xx_spinlock_hwmod, + .clk = "l4ls_gclk", + .user = OCP_USER_MPU, +}; + +/* l4 ls -> mcasp0 */ +static struct omap_hwmod_addr_space am33xx_mcasp0_addr_space[] = { + { + .pa_start = 0x48038000, + .pa_end = 0x48038000 + SZ_8K - 1, + .flags = ADDR_TYPE_RT + }, + { } +}; + +struct omap_hwmod_ocp_if am33xx_l4_ls__mcasp0 = { + .master = &am33xx_l4_ls_hwmod, + .slave = &am33xx_mcasp0_hwmod, + .clk = "l4ls_gclk", + .addr = am33xx_mcasp0_addr_space, + .user = OCP_USER_MPU, +}; + +/* l4 ls -> mcasp1 */ +static struct omap_hwmod_addr_space am33xx_mcasp1_addr_space[] = { + { + .pa_start = 0x4803C000, + .pa_end = 0x4803C000 + SZ_8K - 1, + .flags = ADDR_TYPE_RT + }, + { } +}; + +struct omap_hwmod_ocp_if am33xx_l4_ls__mcasp1 = { + .master = &am33xx_l4_ls_hwmod, + .slave = &am33xx_mcasp1_hwmod, + .clk = "l4ls_gclk", + .addr = am33xx_mcasp1_addr_space, + .user = OCP_USER_MPU, +}; + +/* l4 ls -> mmc0 */ +static struct omap_hwmod_addr_space am33xx_mmc0_addr_space[] = { + { + .pa_start = 0x48060100, + .pa_end = 0x48060100 + SZ_4K - 1, + .flags = ADDR_TYPE_RT, + }, + { } +}; + +struct omap_hwmod_ocp_if am33xx_l4_ls__mmc0 = { + .master = &am33xx_l4_ls_hwmod, + .slave = &am33xx_mmc0_hwmod, + .clk = "l4ls_gclk", + .addr = am33xx_mmc0_addr_space, + .user = OCP_USER_MPU, +}; + +/* l4 ls -> mmc1 */ +static struct omap_hwmod_addr_space am33xx_mmc1_addr_space[] = { + { + .pa_start = 0x481d8100, + .pa_end = 0x481d8100 + SZ_4K - 1, + .flags = ADDR_TYPE_RT, + }, + { } +}; + +struct omap_hwmod_ocp_if am33xx_l4_ls__mmc1 = { + .master = &am33xx_l4_ls_hwmod, + .slave = &am33xx_mmc1_hwmod, + .clk = "l4ls_gclk", + .addr = am33xx_mmc1_addr_space, + .user = OCP_USER_MPU, +}; + +/* l3 s -> mmc2 */ +static struct omap_hwmod_addr_space am33xx_mmc2_addr_space[] = { + { + .pa_start = 0x47810100, + .pa_end = 0x47810100 + SZ_64K - 1, + .flags = ADDR_TYPE_RT, + }, + { } +}; + +struct omap_hwmod_ocp_if am33xx_l3_s__mmc2 = { + .master = &am33xx_l3_s_hwmod, + .slave = &am33xx_mmc2_hwmod, + .clk = "l3s_gclk", + .addr = am33xx_mmc2_addr_space, + .user = OCP_USER_MPU, +}; + +/* l4 ls -> mcspi0 */ +struct omap_hwmod_ocp_if am33xx_l4_ls__mcspi0 = { + .master = &am33xx_l4_ls_hwmod, + .slave = &am33xx_spi0_hwmod, + .clk = "l4ls_gclk", + .user = OCP_USER_MPU, +}; + +/* l4 ls -> mcspi1 */ +struct omap_hwmod_ocp_if am33xx_l4_ls__mcspi1 = { + .master = &am33xx_l4_ls_hwmod, + .slave = &am33xx_spi1_hwmod, + .clk = "l4ls_gclk", + .user = OCP_USER_MPU, +}; + +/* l4 per -> timer2 */ +struct omap_hwmod_ocp_if am33xx_l4_ls__timer2 = { + .master = &am33xx_l4_ls_hwmod, + .slave = &am33xx_timer2_hwmod, + .clk = "l4ls_gclk", + .user = OCP_USER_MPU, +}; + +/* l4 per -> timer3 */ +struct omap_hwmod_ocp_if am33xx_l4_ls__timer3 = { + .master = &am33xx_l4_ls_hwmod, + .slave = &am33xx_timer3_hwmod, + .clk = "l4ls_gclk", + .user = OCP_USER_MPU, +}; + +/* l4 per -> timer4 */ +struct omap_hwmod_ocp_if am33xx_l4_ls__timer4 = { + .master = &am33xx_l4_ls_hwmod, + .slave = &am33xx_timer4_hwmod, + .clk = "l4ls_gclk", + .user = OCP_USER_MPU, +}; + +/* l4 per -> timer5 */ +struct omap_hwmod_ocp_if am33xx_l4_ls__timer5 = { + .master = &am33xx_l4_ls_hwmod, + .slave = &am33xx_timer5_hwmod, + .clk = "l4ls_gclk", + .user = OCP_USER_MPU, +}; + +/* l4 per -> timer6 */ +struct omap_hwmod_ocp_if am33xx_l4_ls__timer6 = { + .master = &am33xx_l4_ls_hwmod, + .slave = &am33xx_timer6_hwmod, + .clk = "l4ls_gclk", + .user = OCP_USER_MPU, +}; + +/* l4 per -> timer7 */ +struct omap_hwmod_ocp_if am33xx_l4_ls__timer7 = { + .master = &am33xx_l4_ls_hwmod, + .slave = &am33xx_timer7_hwmod, + .clk = "l4ls_gclk", + .user = OCP_USER_MPU, +}; + +/* l3 main -> tpcc */ +struct omap_hwmod_ocp_if am33xx_l3_main__tpcc = { + .master = &am33xx_l3_main_hwmod, + .slave = &am33xx_tpcc_hwmod, + .clk = "l3_gclk", + .user = OCP_USER_MPU, +}; + +/* l3 main -> tpcc0 */ +static struct omap_hwmod_addr_space am33xx_tptc0_addr_space[] = { + { + .pa_start = 0x49800000, + .pa_end = 0x49800000 + SZ_8K - 1, + .flags = ADDR_TYPE_RT, + }, + { } +}; + +struct omap_hwmod_ocp_if am33xx_l3_main__tptc0 = { + .master = &am33xx_l3_main_hwmod, + .slave = &am33xx_tptc0_hwmod, + .clk = "l3_gclk", + .addr = am33xx_tptc0_addr_space, + .user = OCP_USER_MPU, +}; + +/* l3 main -> tpcc1 */ +static struct omap_hwmod_addr_space am33xx_tptc1_addr_space[] = { + { + .pa_start = 0x49900000, + .pa_end = 0x49900000 + SZ_8K - 1, + .flags = ADDR_TYPE_RT, + }, + { } +}; + +struct omap_hwmod_ocp_if am33xx_l3_main__tptc1 = { + .master = &am33xx_l3_main_hwmod, + .slave = &am33xx_tptc1_hwmod, + .clk = "l3_gclk", + .addr = am33xx_tptc1_addr_space, + .user = OCP_USER_MPU, +}; + +/* l3 main -> tpcc2 */ +static struct omap_hwmod_addr_space am33xx_tptc2_addr_space[] = { + { + .pa_start = 0x49a00000, + .pa_end = 0x49a00000 + SZ_8K - 1, + .flags = ADDR_TYPE_RT, + }, + { } +}; + +struct omap_hwmod_ocp_if am33xx_l3_main__tptc2 = { + .master = &am33xx_l3_main_hwmod, + .slave = &am33xx_tptc2_hwmod, + .clk = "l3_gclk", + .addr = am33xx_tptc2_addr_space, + .user = OCP_USER_MPU, +}; + +/* l4 ls -> uart2 */ +struct omap_hwmod_ocp_if am33xx_l4_ls__uart2 = { + .master = &am33xx_l4_ls_hwmod, + .slave = &am33xx_uart2_hwmod, + .clk = "l4ls_gclk", + .user = OCP_USER_MPU, +}; + +/* l4 ls -> uart3 */ +struct omap_hwmod_ocp_if am33xx_l4_ls__uart3 = { + .master = &am33xx_l4_ls_hwmod, + .slave = &am33xx_uart3_hwmod, + .clk = "l4ls_gclk", + .user = OCP_USER_MPU, +}; + +/* l4 ls -> uart4 */ +struct omap_hwmod_ocp_if am33xx_l4_ls__uart4 = { + .master = &am33xx_l4_ls_hwmod, + .slave = &am33xx_uart4_hwmod, + .clk = "l4ls_gclk", + .user = OCP_USER_MPU, +}; + +/* l4 ls -> uart5 */ +struct omap_hwmod_ocp_if am33xx_l4_ls__uart5 = { + .master = &am33xx_l4_ls_hwmod, + .slave = &am33xx_uart5_hwmod, + .clk = "l4ls_gclk", + .user = OCP_USER_MPU, +}; + +/* l4 ls -> uart6 */ +struct omap_hwmod_ocp_if am33xx_l4_ls__uart6 = { + .master = &am33xx_l4_ls_hwmod, + .slave = &am33xx_uart6_hwmod, + .clk = "l4ls_gclk", + .user = OCP_USER_MPU, +}; + +/* l3 main -> ocmc */ +struct omap_hwmod_ocp_if am33xx_l3_main__ocmc = { + .master = &am33xx_l3_main_hwmod, + .slave = &am33xx_ocmcram_hwmod, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l3 main -> sha0 HIB2 */ +static struct omap_hwmod_addr_space am33xx_sha0_addrs[] = { + { + .pa_start = 0x53100000, + .pa_end = 0x53100000 + SZ_512 - 1, + .flags = ADDR_TYPE_RT + }, + { } +}; + +struct omap_hwmod_ocp_if am33xx_l3_main__sha0 = { + .master = &am33xx_l3_main_hwmod, + .slave = &am33xx_sha0_hwmod, + .clk = "sha0_fck", + .addr = am33xx_sha0_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l3 main -> AES0 HIB2 */ +static struct omap_hwmod_addr_space am33xx_aes0_addrs[] = { + { + .pa_start = 0x53500000, + .pa_end = 0x53500000 + SZ_1M - 1, + .flags = ADDR_TYPE_RT + }, + { } +}; + +struct omap_hwmod_ocp_if am33xx_l3_main__aes0 = { + .master = &am33xx_l3_main_hwmod, + .slave = &am33xx_aes0_hwmod, + .clk = "aes0_fck", + .addr = am33xx_aes0_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c new file mode 100644 index 00000000000..0f178623e7d --- /dev/null +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c @@ -0,0 +1,1469 @@ +/* + * + * Copyright (C) 2013 Texas Instruments Incorporated + * + * Hwmod common for AM335x and AM43x + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/platform_data/gpio-omap.h> +#include <linux/platform_data/spi-omap2-mcspi.h> +#include "omap_hwmod.h" +#include "i2c.h" +#include "mmc.h" +#include "wd_timer.h" +#include "cm33xx.h" +#include "prm33xx.h" +#include "omap_hwmod_33xx_43xx_common_data.h" +#include "prcm43xx.h" + +#define CLKCTRL(oh, clkctrl) ((oh).prcm.omap4.clkctrl_offs = (clkctrl)) +#define RSTCTRL(oh, rstctrl) ((oh).prcm.omap4.rstctrl_offs = (rstctrl)) +#define RSTST(oh, rstst) ((oh).prcm.omap4.rstst_offs = (rstst)) + +/* + * 'l3' class + * instance(s): l3_main, l3_s, l3_instr + */ +static struct omap_hwmod_class am33xx_l3_hwmod_class = { + .name = "l3", +}; + +struct omap_hwmod am33xx_l3_main_hwmod = { + .name = "l3_main", + .class = &am33xx_l3_hwmod_class, + .clkdm_name = "l3_clkdm", + .flags = HWMOD_INIT_NO_IDLE, + .main_clk = "l3_gclk", + .prcm = { + .omap4 = { + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* l3_s */ +struct omap_hwmod am33xx_l3_s_hwmod = { + .name = "l3_s", + .class = &am33xx_l3_hwmod_class, + .clkdm_name = "l3s_clkdm", +}; + +/* l3_instr */ +struct omap_hwmod am33xx_l3_instr_hwmod = { + .name = "l3_instr", + .class = &am33xx_l3_hwmod_class, + .clkdm_name = "l3_clkdm", + .flags = HWMOD_INIT_NO_IDLE, + .main_clk = "l3_gclk", + .prcm = { + .omap4 = { + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* + * 'l4' class + * instance(s): l4_ls, l4_hs, l4_wkup, l4_fw + */ +struct omap_hwmod_class am33xx_l4_hwmod_class = { + .name = "l4", +}; + +/* l4_ls */ +struct omap_hwmod am33xx_l4_ls_hwmod = { + .name = "l4_ls", + .class = &am33xx_l4_hwmod_class, + .clkdm_name = "l4ls_clkdm", + .flags = HWMOD_INIT_NO_IDLE, + .main_clk = "l4ls_gclk", + .prcm = { + .omap4 = { + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* l4_wkup */ +struct omap_hwmod am33xx_l4_wkup_hwmod = { + .name = "l4_wkup", + .class = &am33xx_l4_hwmod_class, + .clkdm_name = "l4_wkup_clkdm", + .flags = HWMOD_INIT_NO_IDLE, + .prcm = { + .omap4 = { + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* + * 'mpu' class + */ +static struct omap_hwmod_class am33xx_mpu_hwmod_class = { + .name = "mpu", +}; + +struct omap_hwmod am33xx_mpu_hwmod = { + .name = "mpu", + .class = &am33xx_mpu_hwmod_class, + .clkdm_name = "mpu_clkdm", + .flags = HWMOD_INIT_NO_IDLE, + .main_clk = "dpll_mpu_m2_ck", + .prcm = { + .omap4 = { + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* + * 'wakeup m3' class + * Wakeup controller sub-system under wakeup domain + */ +struct omap_hwmod_class am33xx_wkup_m3_hwmod_class = { + .name = "wkup_m3", +}; + +/* + * 'pru-icss' class + * Programmable Real-Time Unit and Industrial Communication Subsystem + */ +static struct omap_hwmod_class am33xx_pruss_hwmod_class = { + .name = "pruss", +}; + +static struct omap_hwmod_rst_info am33xx_pruss_resets[] = { + { .name = "pruss", .rst_shift = 1 }, +}; + +/* pru-icss */ +/* Pseudo hwmod for reset control purpose only */ +struct omap_hwmod am33xx_pruss_hwmod = { + .name = "pruss", + .class = &am33xx_pruss_hwmod_class, + .clkdm_name = "pruss_ocp_clkdm", + .main_clk = "pruss_ocp_gclk", + .prcm = { + .omap4 = { + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .rst_lines = am33xx_pruss_resets, + .rst_lines_cnt = ARRAY_SIZE(am33xx_pruss_resets), +}; + +/* gfx */ +/* Pseudo hwmod for reset control purpose only */ +static struct omap_hwmod_class am33xx_gfx_hwmod_class = { + .name = "gfx", +}; + +static struct omap_hwmod_rst_info am33xx_gfx_resets[] = { + { .name = "gfx", .rst_shift = 0, .st_shift = 0}, +}; + +struct omap_hwmod am33xx_gfx_hwmod = { + .name = "gfx", + .class = &am33xx_gfx_hwmod_class, + .clkdm_name = "gfx_l3_clkdm", + .main_clk = "gfx_fck_div_ck", + .prcm = { + .omap4 = { + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .rst_lines = am33xx_gfx_resets, + .rst_lines_cnt = ARRAY_SIZE(am33xx_gfx_resets), +}; + +/* + * 'prcm' class + * power and reset manager (whole prcm infrastructure) + */ +static struct omap_hwmod_class am33xx_prcm_hwmod_class = { + .name = "prcm", +}; + +/* prcm */ +struct omap_hwmod am33xx_prcm_hwmod = { + .name = "prcm", + .class = &am33xx_prcm_hwmod_class, + .clkdm_name = "l4_wkup_clkdm", +}; + +/* + * 'aes0' class + */ +static struct omap_hwmod_class_sysconfig am33xx_aes0_sysc = { + .rev_offs = 0x80, + .sysc_offs = 0x84, + .syss_offs = 0x88, + .sysc_flags = SYSS_HAS_RESET_STATUS, +}; + +static struct omap_hwmod_class am33xx_aes0_hwmod_class = { + .name = "aes0", + .sysc = &am33xx_aes0_sysc, +}; + +struct omap_hwmod am33xx_aes0_hwmod = { + .name = "aes", + .class = &am33xx_aes0_hwmod_class, + .clkdm_name = "l3_clkdm", + .main_clk = "aes0_fck", + .prcm = { + .omap4 = { + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* sha0 HIB2 (the 'P' (public) device) */ +static struct omap_hwmod_class_sysconfig am33xx_sha0_sysc = { + .rev_offs = 0x100, + .sysc_offs = 0x110, + .syss_offs = 0x114, + .sysc_flags = SYSS_HAS_RESET_STATUS, +}; + +static struct omap_hwmod_class am33xx_sha0_hwmod_class = { + .name = "sha0", + .sysc = &am33xx_sha0_sysc, +}; + +struct omap_hwmod am33xx_sha0_hwmod = { + .name = "sham", + .class = &am33xx_sha0_hwmod_class, + .clkdm_name = "l3_clkdm", + .main_clk = "l3_gclk", + .prcm = { + .omap4 = { + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* ocmcram */ +static struct omap_hwmod_class am33xx_ocmcram_hwmod_class = { + .name = "ocmcram", +}; + +struct omap_hwmod am33xx_ocmcram_hwmod = { + .name = "ocmcram", + .class = &am33xx_ocmcram_hwmod_class, + .clkdm_name = "l3_clkdm", + .flags = HWMOD_INIT_NO_IDLE, + .main_clk = "l3_gclk", + .prcm = { + .omap4 = { + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* 'smartreflex' class */ +static struct omap_hwmod_class am33xx_smartreflex_hwmod_class = { + .name = "smartreflex", +}; + +/* smartreflex0 */ +struct omap_hwmod am33xx_smartreflex0_hwmod = { + .name = "smartreflex0", + .class = &am33xx_smartreflex_hwmod_class, + .clkdm_name = "l4_wkup_clkdm", + .main_clk = "smartreflex0_fck", + .prcm = { + .omap4 = { + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* smartreflex1 */ +struct omap_hwmod am33xx_smartreflex1_hwmod = { + .name = "smartreflex1", + .class = &am33xx_smartreflex_hwmod_class, + .clkdm_name = "l4_wkup_clkdm", + .main_clk = "smartreflex1_fck", + .prcm = { + .omap4 = { + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* + * 'control' module class + */ +struct omap_hwmod_class am33xx_control_hwmod_class = { + .name = "control", +}; + +/* + * 'cpgmac' class + * cpsw/cpgmac sub system + */ +static struct omap_hwmod_class_sysconfig am33xx_cpgmac_sysc = { + .rev_offs = 0x0, + .sysc_offs = 0x8, + .syss_offs = 0x4, + .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE | + SYSS_HAS_RESET_STATUS), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | MSTANDBY_FORCE | + MSTANDBY_NO), + .sysc_fields = &omap_hwmod_sysc_type3, +}; + +static struct omap_hwmod_class am33xx_cpgmac0_hwmod_class = { + .name = "cpgmac0", + .sysc = &am33xx_cpgmac_sysc, +}; + +struct omap_hwmod am33xx_cpgmac0_hwmod = { + .name = "cpgmac0", + .class = &am33xx_cpgmac0_hwmod_class, + .clkdm_name = "cpsw_125mhz_clkdm", + .flags = (HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY), + .main_clk = "cpsw_125mhz_gclk", + .mpu_rt_idx = 1, + .prcm = { + .omap4 = { + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* + * mdio class + */ +static struct omap_hwmod_class am33xx_mdio_hwmod_class = { + .name = "davinci_mdio", +}; + +struct omap_hwmod am33xx_mdio_hwmod = { + .name = "davinci_mdio", + .class = &am33xx_mdio_hwmod_class, + .clkdm_name = "cpsw_125mhz_clkdm", + .main_clk = "cpsw_125mhz_gclk", +}; + +/* + * dcan class + */ +static struct omap_hwmod_class am33xx_dcan_hwmod_class = { + .name = "d_can", +}; + +/* dcan0 */ +struct omap_hwmod am33xx_dcan0_hwmod = { + .name = "d_can0", + .class = &am33xx_dcan_hwmod_class, + .clkdm_name = "l4ls_clkdm", + .main_clk = "dcan0_fck", + .prcm = { + .omap4 = { + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* dcan1 */ +struct omap_hwmod am33xx_dcan1_hwmod = { + .name = "d_can1", + .class = &am33xx_dcan_hwmod_class, + .clkdm_name = "l4ls_clkdm", + .main_clk = "dcan1_fck", + .prcm = { + .omap4 = { + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* elm */ +static struct omap_hwmod_class_sysconfig am33xx_elm_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE | + SYSS_HAS_RESET_STATUS), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class am33xx_elm_hwmod_class = { + .name = "elm", + .sysc = &am33xx_elm_sysc, +}; + +struct omap_hwmod am33xx_elm_hwmod = { + .name = "elm", + .class = &am33xx_elm_hwmod_class, + .clkdm_name = "l4ls_clkdm", + .main_clk = "l4ls_gclk", + .prcm = { + .omap4 = { + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* pwmss */ +static struct omap_hwmod_class_sysconfig am33xx_epwmss_sysc = { + .rev_offs = 0x0, + .sysc_offs = 0x4, + .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO | + MSTANDBY_SMART | MSTANDBY_SMART_WKUP), + .sysc_fields = &omap_hwmod_sysc_type2, +}; + +struct omap_hwmod_class am33xx_epwmss_hwmod_class = { + .name = "epwmss", + .sysc = &am33xx_epwmss_sysc, +}; + +static struct omap_hwmod_class am33xx_ecap_hwmod_class = { + .name = "ecap", +}; + +static struct omap_hwmod_class am33xx_eqep_hwmod_class = { + .name = "eqep", +}; + +struct omap_hwmod_class am33xx_ehrpwm_hwmod_class = { + .name = "ehrpwm", +}; + +/* epwmss0 */ +struct omap_hwmod am33xx_epwmss0_hwmod = { + .name = "epwmss0", + .class = &am33xx_epwmss_hwmod_class, + .clkdm_name = "l4ls_clkdm", + .main_clk = "l4ls_gclk", + .prcm = { + .omap4 = { + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* ecap0 */ +struct omap_hwmod am33xx_ecap0_hwmod = { + .name = "ecap0", + .class = &am33xx_ecap_hwmod_class, + .clkdm_name = "l4ls_clkdm", + .main_clk = "l4ls_gclk", +}; + +/* eqep0 */ +struct omap_hwmod am33xx_eqep0_hwmod = { + .name = "eqep0", + .class = &am33xx_eqep_hwmod_class, + .clkdm_name = "l4ls_clkdm", + .main_clk = "l4ls_gclk", +}; + +/* ehrpwm0 */ +struct omap_hwmod am33xx_ehrpwm0_hwmod = { + .name = "ehrpwm0", + .class = &am33xx_ehrpwm_hwmod_class, + .clkdm_name = "l4ls_clkdm", + .main_clk = "l4ls_gclk", +}; + +/* epwmss1 */ +struct omap_hwmod am33xx_epwmss1_hwmod = { + .name = "epwmss1", + .class = &am33xx_epwmss_hwmod_class, + .clkdm_name = "l4ls_clkdm", + .main_clk = "l4ls_gclk", + .prcm = { + .omap4 = { + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* ecap1 */ +struct omap_hwmod am33xx_ecap1_hwmod = { + .name = "ecap1", + .class = &am33xx_ecap_hwmod_class, + .clkdm_name = "l4ls_clkdm", + .main_clk = "l4ls_gclk", +}; + +/* eqep1 */ +struct omap_hwmod am33xx_eqep1_hwmod = { + .name = "eqep1", + .class = &am33xx_eqep_hwmod_class, + .clkdm_name = "l4ls_clkdm", + .main_clk = "l4ls_gclk", +}; + +/* ehrpwm1 */ +struct omap_hwmod am33xx_ehrpwm1_hwmod = { + .name = "ehrpwm1", + .class = &am33xx_ehrpwm_hwmod_class, + .clkdm_name = "l4ls_clkdm", + .main_clk = "l4ls_gclk", +}; + +/* epwmss2 */ +struct omap_hwmod am33xx_epwmss2_hwmod = { + .name = "epwmss2", + .class = &am33xx_epwmss_hwmod_class, + .clkdm_name = "l4ls_clkdm", + .main_clk = "l4ls_gclk", + .prcm = { + .omap4 = { + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* ecap2 */ +struct omap_hwmod am33xx_ecap2_hwmod = { + .name = "ecap2", + .class = &am33xx_ecap_hwmod_class, + .clkdm_name = "l4ls_clkdm", + .main_clk = "l4ls_gclk", +}; + +/* eqep2 */ +struct omap_hwmod am33xx_eqep2_hwmod = { + .name = "eqep2", + .class = &am33xx_eqep_hwmod_class, + .clkdm_name = "l4ls_clkdm", + .main_clk = "l4ls_gclk", +}; + +/* ehrpwm2 */ +struct omap_hwmod am33xx_ehrpwm2_hwmod = { + .name = "ehrpwm2", + .class = &am33xx_ehrpwm_hwmod_class, + .clkdm_name = "l4ls_clkdm", + .main_clk = "l4ls_gclk", +}; + +/* + * 'gpio' class: for gpio 0,1,2,3 + */ +static struct omap_hwmod_class_sysconfig am33xx_gpio_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0114, + .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_ENAWAKEUP | + SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | + SYSS_HAS_RESET_STATUS), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + SIDLE_SMART_WKUP), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +struct omap_hwmod_class am33xx_gpio_hwmod_class = { + .name = "gpio", + .sysc = &am33xx_gpio_sysc, + .rev = 2, +}; + +struct omap_gpio_dev_attr gpio_dev_attr = { + .bank_width = 32, + .dbck_flag = true, +}; + +/* gpio1 */ +static struct omap_hwmod_opt_clk gpio1_opt_clks[] = { + { .role = "dbclk", .clk = "gpio1_dbclk" }, +}; + +struct omap_hwmod am33xx_gpio1_hwmod = { + .name = "gpio2", + .class = &am33xx_gpio_hwmod_class, + .clkdm_name = "l4ls_clkdm", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, + .main_clk = "l4ls_gclk", + .prcm = { + .omap4 = { + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .opt_clks = gpio1_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(gpio1_opt_clks), + .dev_attr = &gpio_dev_attr, +}; + +/* gpio2 */ +static struct omap_hwmod_opt_clk gpio2_opt_clks[] = { + { .role = "dbclk", .clk = "gpio2_dbclk" }, +}; + +struct omap_hwmod am33xx_gpio2_hwmod = { + .name = "gpio3", + .class = &am33xx_gpio_hwmod_class, + .clkdm_name = "l4ls_clkdm", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, + .main_clk = "l4ls_gclk", + .prcm = { + .omap4 = { + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .opt_clks = gpio2_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(gpio2_opt_clks), + .dev_attr = &gpio_dev_attr, +}; + +/* gpio3 */ +static struct omap_hwmod_opt_clk gpio3_opt_clks[] = { + { .role = "dbclk", .clk = "gpio3_dbclk" }, +}; + +struct omap_hwmod am33xx_gpio3_hwmod = { + .name = "gpio4", + .class = &am33xx_gpio_hwmod_class, + .clkdm_name = "l4ls_clkdm", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, + .main_clk = "l4ls_gclk", + .prcm = { + .omap4 = { + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .opt_clks = gpio3_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(gpio3_opt_clks), + .dev_attr = &gpio_dev_attr, +}; + +/* gpmc */ +static struct omap_hwmod_class_sysconfig gpmc_sysc = { + .rev_offs = 0x0, + .sysc_offs = 0x10, + .syss_offs = 0x14, + .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class am33xx_gpmc_hwmod_class = { + .name = "gpmc", + .sysc = &gpmc_sysc, +}; + +struct omap_hwmod am33xx_gpmc_hwmod = { + .name = "gpmc", + .class = &am33xx_gpmc_hwmod_class, + .clkdm_name = "l3s_clkdm", + .flags = (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET), + .main_clk = "l3s_gclk", + .prcm = { + .omap4 = { + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* 'i2c' class */ +static struct omap_hwmod_class_sysconfig am33xx_i2c_sysc = { + .sysc_offs = 0x0010, + .syss_offs = 0x0090, + .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY | + SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + SIDLE_SMART_WKUP), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class i2c_class = { + .name = "i2c", + .sysc = &am33xx_i2c_sysc, + .rev = OMAP_I2C_IP_VERSION_2, + .reset = &omap_i2c_reset, +}; + +static struct omap_i2c_dev_attr i2c_dev_attr = { + .flags = OMAP_I2C_FLAG_BUS_SHIFT_NONE, +}; + +/* i2c1 */ +struct omap_hwmod am33xx_i2c1_hwmod = { + .name = "i2c1", + .class = &i2c_class, + .clkdm_name = "l4_wkup_clkdm", + .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, + .main_clk = "dpll_per_m2_div4_wkupdm_ck", + .prcm = { + .omap4 = { + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .dev_attr = &i2c_dev_attr, +}; + +/* i2c1 */ +struct omap_hwmod am33xx_i2c2_hwmod = { + .name = "i2c2", + .class = &i2c_class, + .clkdm_name = "l4ls_clkdm", + .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, + .main_clk = "dpll_per_m2_div4_ck", + .prcm = { + .omap4 = { + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .dev_attr = &i2c_dev_attr, +}; + +/* i2c3 */ +struct omap_hwmod am33xx_i2c3_hwmod = { + .name = "i2c3", + .class = &i2c_class, + .clkdm_name = "l4ls_clkdm", + .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, + .main_clk = "dpll_per_m2_div4_ck", + .prcm = { + .omap4 = { + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .dev_attr = &i2c_dev_attr, +}; + +/* + * 'mailbox' class + * mailbox module allowing communication between the on-chip processors using a + * queued mailbox-interrupt mechanism. + */ +static struct omap_hwmod_class_sysconfig am33xx_mailbox_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .sysc_flags = (SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type2, +}; + +static struct omap_hwmod_class am33xx_mailbox_hwmod_class = { + .name = "mailbox", + .sysc = &am33xx_mailbox_sysc, +}; + +struct omap_hwmod am33xx_mailbox_hwmod = { + .name = "mailbox", + .class = &am33xx_mailbox_hwmod_class, + .clkdm_name = "l4ls_clkdm", + .main_clk = "l4ls_gclk", + .prcm = { + .omap4 = { + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* + * 'mcasp' class + */ +static struct omap_hwmod_class_sysconfig am33xx_mcasp_sysc = { + .rev_offs = 0x0, + .sysc_offs = 0x4, + .sysc_flags = SYSC_HAS_SIDLEMODE, + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type3, +}; + +static struct omap_hwmod_class am33xx_mcasp_hwmod_class = { + .name = "mcasp", + .sysc = &am33xx_mcasp_sysc, +}; + +/* mcasp0 */ +struct omap_hwmod am33xx_mcasp0_hwmod = { + .name = "mcasp0", + .class = &am33xx_mcasp_hwmod_class, + .clkdm_name = "l3s_clkdm", + .main_clk = "mcasp0_fck", + .prcm = { + .omap4 = { + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* mcasp1 */ +struct omap_hwmod am33xx_mcasp1_hwmod = { + .name = "mcasp1", + .class = &am33xx_mcasp_hwmod_class, + .clkdm_name = "l3s_clkdm", + .main_clk = "mcasp1_fck", + .prcm = { + .omap4 = { + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* 'mmc' class */ +static struct omap_hwmod_class_sysconfig am33xx_mmc_sysc = { + .rev_offs = 0x1fc, + .sysc_offs = 0x10, + .syss_offs = 0x14, + .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE | + SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET | + SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class am33xx_mmc_hwmod_class = { + .name = "mmc", + .sysc = &am33xx_mmc_sysc, +}; + +/* mmc0 */ +static struct omap_mmc_dev_attr am33xx_mmc0_dev_attr = { + .flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT, +}; + +struct omap_hwmod am33xx_mmc0_hwmod = { + .name = "mmc1", + .class = &am33xx_mmc_hwmod_class, + .clkdm_name = "l4ls_clkdm", + .main_clk = "mmc_clk", + .prcm = { + .omap4 = { + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .dev_attr = &am33xx_mmc0_dev_attr, +}; + +/* mmc1 */ +static struct omap_mmc_dev_attr am33xx_mmc1_dev_attr = { + .flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT, +}; + +struct omap_hwmod am33xx_mmc1_hwmod = { + .name = "mmc2", + .class = &am33xx_mmc_hwmod_class, + .clkdm_name = "l4ls_clkdm", + .main_clk = "mmc_clk", + .prcm = { + .omap4 = { + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .dev_attr = &am33xx_mmc1_dev_attr, +}; + +/* mmc2 */ +static struct omap_mmc_dev_attr am33xx_mmc2_dev_attr = { + .flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT, +}; +struct omap_hwmod am33xx_mmc2_hwmod = { + .name = "mmc3", + .class = &am33xx_mmc_hwmod_class, + .clkdm_name = "l3s_clkdm", + .main_clk = "mmc_clk", + .prcm = { + .omap4 = { + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .dev_attr = &am33xx_mmc2_dev_attr, +}; + +/* + * 'rtc' class + * rtc subsystem + */ +static struct omap_hwmod_class_sysconfig am33xx_rtc_sysc = { + .rev_offs = 0x0074, + .sysc_offs = 0x0078, + .sysc_flags = SYSC_HAS_SIDLEMODE, + .idlemodes = (SIDLE_FORCE | SIDLE_NO | + SIDLE_SMART | SIDLE_SMART_WKUP), + .sysc_fields = &omap_hwmod_sysc_type3, +}; + +static struct omap_hwmod_class am33xx_rtc_hwmod_class = { + .name = "rtc", + .sysc = &am33xx_rtc_sysc, +}; + +struct omap_hwmod am33xx_rtc_hwmod = { + .name = "rtc", + .class = &am33xx_rtc_hwmod_class, + .clkdm_name = "l4_rtc_clkdm", + .main_clk = "clk_32768_ck", + .prcm = { + .omap4 = { + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* 'spi' class */ +static struct omap_hwmod_class_sysconfig am33xx_mcspi_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0110, + .syss_offs = 0x0114, + .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE | + SYSS_HAS_RESET_STATUS), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +struct omap_hwmod_class am33xx_spi_hwmod_class = { + .name = "mcspi", + .sysc = &am33xx_mcspi_sysc, + .rev = OMAP4_MCSPI_REV, +}; + +/* spi0 */ +struct omap2_mcspi_dev_attr mcspi_attrib = { + .num_chipselect = 2, +}; +struct omap_hwmod am33xx_spi0_hwmod = { + .name = "spi0", + .class = &am33xx_spi_hwmod_class, + .clkdm_name = "l4ls_clkdm", + .main_clk = "dpll_per_m2_div4_ck", + .prcm = { + .omap4 = { + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .dev_attr = &mcspi_attrib, +}; + +/* spi1 */ +struct omap_hwmod am33xx_spi1_hwmod = { + .name = "spi1", + .class = &am33xx_spi_hwmod_class, + .clkdm_name = "l4ls_clkdm", + .main_clk = "dpll_per_m2_div4_ck", + .prcm = { + .omap4 = { + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .dev_attr = &mcspi_attrib, +}; + +/* + * 'spinlock' class + * spinlock provides hardware assistance for synchronizing the + * processes running on multiple processors + */ + +static struct omap_hwmod_class_sysconfig am33xx_spinlock_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY | + SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class am33xx_spinlock_hwmod_class = { + .name = "spinlock", + .sysc = &am33xx_spinlock_sysc, +}; + +struct omap_hwmod am33xx_spinlock_hwmod = { + .name = "spinlock", + .class = &am33xx_spinlock_hwmod_class, + .clkdm_name = "l4ls_clkdm", + .main_clk = "l4ls_gclk", + .prcm = { + .omap4 = { + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* 'timer 2-7' class */ +static struct omap_hwmod_class_sysconfig am33xx_timer_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + SIDLE_SMART_WKUP), + .sysc_fields = &omap_hwmod_sysc_type2, +}; + +struct omap_hwmod_class am33xx_timer_hwmod_class = { + .name = "timer", + .sysc = &am33xx_timer_sysc, +}; + +/* timer1 1ms */ +static struct omap_hwmod_class_sysconfig am33xx_timer1ms_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE | + SYSS_HAS_RESET_STATUS), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class am33xx_timer1ms_hwmod_class = { + .name = "timer", + .sysc = &am33xx_timer1ms_sysc, +}; + +struct omap_hwmod am33xx_timer1_hwmod = { + .name = "timer1", + .class = &am33xx_timer1ms_hwmod_class, + .clkdm_name = "l4_wkup_clkdm", + .main_clk = "timer1_fck", + .prcm = { + .omap4 = { + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +struct omap_hwmod am33xx_timer2_hwmod = { + .name = "timer2", + .class = &am33xx_timer_hwmod_class, + .clkdm_name = "l4ls_clkdm", + .main_clk = "timer2_fck", + .prcm = { + .omap4 = { + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +struct omap_hwmod am33xx_timer3_hwmod = { + .name = "timer3", + .class = &am33xx_timer_hwmod_class, + .clkdm_name = "l4ls_clkdm", + .main_clk = "timer3_fck", + .prcm = { + .omap4 = { + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +struct omap_hwmod am33xx_timer4_hwmod = { + .name = "timer4", + .class = &am33xx_timer_hwmod_class, + .clkdm_name = "l4ls_clkdm", + .main_clk = "timer4_fck", + .prcm = { + .omap4 = { + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +struct omap_hwmod am33xx_timer5_hwmod = { + .name = "timer5", + .class = &am33xx_timer_hwmod_class, + .clkdm_name = "l4ls_clkdm", + .main_clk = "timer5_fck", + .prcm = { + .omap4 = { + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +struct omap_hwmod am33xx_timer6_hwmod = { + .name = "timer6", + .class = &am33xx_timer_hwmod_class, + .clkdm_name = "l4ls_clkdm", + .main_clk = "timer6_fck", + .prcm = { + .omap4 = { + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +struct omap_hwmod am33xx_timer7_hwmod = { + .name = "timer7", + .class = &am33xx_timer_hwmod_class, + .clkdm_name = "l4ls_clkdm", + .main_clk = "timer7_fck", + .prcm = { + .omap4 = { + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* tpcc */ +static struct omap_hwmod_class am33xx_tpcc_hwmod_class = { + .name = "tpcc", +}; + +struct omap_hwmod am33xx_tpcc_hwmod = { + .name = "tpcc", + .class = &am33xx_tpcc_hwmod_class, + .clkdm_name = "l3_clkdm", + .main_clk = "l3_gclk", + .prcm = { + .omap4 = { + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +static struct omap_hwmod_class_sysconfig am33xx_tptc_sysc = { + .rev_offs = 0x0, + .sysc_offs = 0x10, + .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | + SYSC_HAS_MIDLEMODE), + .idlemodes = (SIDLE_FORCE | SIDLE_SMART | MSTANDBY_FORCE), + .sysc_fields = &omap_hwmod_sysc_type2, +}; + +/* 'tptc' class */ +static struct omap_hwmod_class am33xx_tptc_hwmod_class = { + .name = "tptc", + .sysc = &am33xx_tptc_sysc, +}; + +/* tptc0 */ +struct omap_hwmod am33xx_tptc0_hwmod = { + .name = "tptc0", + .class = &am33xx_tptc_hwmod_class, + .clkdm_name = "l3_clkdm", + .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY, + .main_clk = "l3_gclk", + .prcm = { + .omap4 = { + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* tptc1 */ +struct omap_hwmod am33xx_tptc1_hwmod = { + .name = "tptc1", + .class = &am33xx_tptc_hwmod_class, + .clkdm_name = "l3_clkdm", + .flags = (HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY), + .main_clk = "l3_gclk", + .prcm = { + .omap4 = { + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* tptc2 */ +struct omap_hwmod am33xx_tptc2_hwmod = { + .name = "tptc2", + .class = &am33xx_tptc_hwmod_class, + .clkdm_name = "l3_clkdm", + .flags = (HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY), + .main_clk = "l3_gclk", + .prcm = { + .omap4 = { + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* 'uart' class */ +static struct omap_hwmod_class_sysconfig uart_sysc = { + .rev_offs = 0x50, + .sysc_offs = 0x54, + .syss_offs = 0x58, + .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_ENAWAKEUP | + SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + SIDLE_SMART_WKUP), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class uart_class = { + .name = "uart", + .sysc = &uart_sysc, +}; + +struct omap_hwmod am33xx_uart1_hwmod = { + .name = "uart1", + .class = &uart_class, + .clkdm_name = "l4_wkup_clkdm", + .flags = DEBUG_AM33XXUART1_FLAGS | HWMOD_SWSUP_SIDLE_ACT, + .main_clk = "dpll_per_m2_div4_wkupdm_ck", + .prcm = { + .omap4 = { + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +struct omap_hwmod am33xx_uart2_hwmod = { + .name = "uart2", + .class = &uart_class, + .clkdm_name = "l4ls_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, + .main_clk = "dpll_per_m2_div4_ck", + .prcm = { + .omap4 = { + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* uart3 */ +struct omap_hwmod am33xx_uart3_hwmod = { + .name = "uart3", + .class = &uart_class, + .clkdm_name = "l4ls_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, + .main_clk = "dpll_per_m2_div4_ck", + .prcm = { + .omap4 = { + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +struct omap_hwmod am33xx_uart4_hwmod = { + .name = "uart4", + .class = &uart_class, + .clkdm_name = "l4ls_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, + .main_clk = "dpll_per_m2_div4_ck", + .prcm = { + .omap4 = { + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +struct omap_hwmod am33xx_uart5_hwmod = { + .name = "uart5", + .class = &uart_class, + .clkdm_name = "l4ls_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, + .main_clk = "dpll_per_m2_div4_ck", + .prcm = { + .omap4 = { + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +struct omap_hwmod am33xx_uart6_hwmod = { + .name = "uart6", + .class = &uart_class, + .clkdm_name = "l4ls_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, + .main_clk = "dpll_per_m2_div4_ck", + .prcm = { + .omap4 = { + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* 'wd_timer' class */ +static struct omap_hwmod_class_sysconfig wdt_sysc = { + .rev_offs = 0x0, + .sysc_offs = 0x10, + .syss_offs = 0x14, + .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + SIDLE_SMART_WKUP), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class am33xx_wd_timer_hwmod_class = { + .name = "wd_timer", + .sysc = &wdt_sysc, + .pre_shutdown = &omap2_wd_timer_disable, +}; + +/* + * XXX: device.c file uses hardcoded name for watchdog timer + * driver "wd_timer2, so we are also using same name as of now... + */ +struct omap_hwmod am33xx_wd_timer1_hwmod = { + .name = "wd_timer2", + .class = &am33xx_wd_timer_hwmod_class, + .clkdm_name = "l4_wkup_clkdm", + .flags = HWMOD_SWSUP_SIDLE, + .main_clk = "wdt1_fck", + .prcm = { + .omap4 = { + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +static void omap_hwmod_am33xx_clkctrl(void) +{ + CLKCTRL(am33xx_uart2_hwmod, AM33XX_CM_PER_UART1_CLKCTRL_OFFSET); + CLKCTRL(am33xx_uart3_hwmod, AM33XX_CM_PER_UART2_CLKCTRL_OFFSET); + CLKCTRL(am33xx_uart4_hwmod, AM33XX_CM_PER_UART3_CLKCTRL_OFFSET); + CLKCTRL(am33xx_uart5_hwmod, AM33XX_CM_PER_UART4_CLKCTRL_OFFSET); + CLKCTRL(am33xx_uart6_hwmod, AM33XX_CM_PER_UART5_CLKCTRL_OFFSET); + CLKCTRL(am33xx_dcan0_hwmod, AM33XX_CM_PER_DCAN0_CLKCTRL_OFFSET); + CLKCTRL(am33xx_dcan1_hwmod, AM33XX_CM_PER_DCAN1_CLKCTRL_OFFSET); + CLKCTRL(am33xx_elm_hwmod, AM33XX_CM_PER_ELM_CLKCTRL_OFFSET); + CLKCTRL(am33xx_epwmss0_hwmod, AM33XX_CM_PER_EPWMSS0_CLKCTRL_OFFSET); + CLKCTRL(am33xx_epwmss1_hwmod, AM33XX_CM_PER_EPWMSS1_CLKCTRL_OFFSET); + CLKCTRL(am33xx_epwmss2_hwmod, AM33XX_CM_PER_EPWMSS2_CLKCTRL_OFFSET); + CLKCTRL(am33xx_gpio1_hwmod, AM33XX_CM_PER_GPIO1_CLKCTRL_OFFSET); + CLKCTRL(am33xx_gpio2_hwmod, AM33XX_CM_PER_GPIO2_CLKCTRL_OFFSET); + CLKCTRL(am33xx_gpio3_hwmod, AM33XX_CM_PER_GPIO3_CLKCTRL_OFFSET); + CLKCTRL(am33xx_i2c2_hwmod, AM33XX_CM_PER_I2C1_CLKCTRL_OFFSET); + CLKCTRL(am33xx_i2c3_hwmod, AM33XX_CM_PER_I2C2_CLKCTRL_OFFSET); + CLKCTRL(am33xx_mailbox_hwmod, AM33XX_CM_PER_MAILBOX0_CLKCTRL_OFFSET); + CLKCTRL(am33xx_mcasp0_hwmod, AM33XX_CM_PER_MCASP0_CLKCTRL_OFFSET); + CLKCTRL(am33xx_mcasp1_hwmod, AM33XX_CM_PER_MCASP1_CLKCTRL_OFFSET); + CLKCTRL(am33xx_mmc0_hwmod, AM33XX_CM_PER_MMC0_CLKCTRL_OFFSET); + CLKCTRL(am33xx_mmc1_hwmod, AM33XX_CM_PER_MMC1_CLKCTRL_OFFSET); + CLKCTRL(am33xx_spi0_hwmod, AM33XX_CM_PER_SPI0_CLKCTRL_OFFSET); + CLKCTRL(am33xx_spi1_hwmod, AM33XX_CM_PER_SPI1_CLKCTRL_OFFSET); + CLKCTRL(am33xx_spinlock_hwmod, AM33XX_CM_PER_SPINLOCK_CLKCTRL_OFFSET); + CLKCTRL(am33xx_timer2_hwmod, AM33XX_CM_PER_TIMER2_CLKCTRL_OFFSET); + CLKCTRL(am33xx_timer3_hwmod, AM33XX_CM_PER_TIMER3_CLKCTRL_OFFSET); + CLKCTRL(am33xx_timer4_hwmod, AM33XX_CM_PER_TIMER4_CLKCTRL_OFFSET); + CLKCTRL(am33xx_timer5_hwmod, AM33XX_CM_PER_TIMER5_CLKCTRL_OFFSET); + CLKCTRL(am33xx_timer6_hwmod, AM33XX_CM_PER_TIMER6_CLKCTRL_OFFSET); + CLKCTRL(am33xx_timer7_hwmod, AM33XX_CM_PER_TIMER7_CLKCTRL_OFFSET); + CLKCTRL(am33xx_smartreflex0_hwmod, + AM33XX_CM_WKUP_SMARTREFLEX0_CLKCTRL_OFFSET); + CLKCTRL(am33xx_smartreflex1_hwmod, + AM33XX_CM_WKUP_SMARTREFLEX1_CLKCTRL_OFFSET); + CLKCTRL(am33xx_uart1_hwmod, AM33XX_CM_WKUP_UART0_CLKCTRL_OFFSET); + CLKCTRL(am33xx_timer1_hwmod, AM33XX_CM_WKUP_TIMER1_CLKCTRL_OFFSET); + CLKCTRL(am33xx_i2c1_hwmod, AM33XX_CM_WKUP_I2C0_CLKCTRL_OFFSET); + CLKCTRL(am33xx_wd_timer1_hwmod, AM33XX_CM_WKUP_WDT1_CLKCTRL_OFFSET); + CLKCTRL(am33xx_rtc_hwmod, AM33XX_CM_RTC_RTC_CLKCTRL_OFFSET); + CLKCTRL(am33xx_mmc2_hwmod, AM33XX_CM_PER_MMC2_CLKCTRL_OFFSET); + CLKCTRL(am33xx_gpmc_hwmod, AM33XX_CM_PER_GPMC_CLKCTRL_OFFSET); + CLKCTRL(am33xx_l4_ls_hwmod, AM33XX_CM_PER_L4LS_CLKCTRL_OFFSET); + CLKCTRL(am33xx_l4_wkup_hwmod, AM33XX_CM_WKUP_L4WKUP_CLKCTRL_OFFSET); + CLKCTRL(am33xx_l3_main_hwmod, AM33XX_CM_PER_L3_CLKCTRL_OFFSET); + CLKCTRL(am33xx_tpcc_hwmod, AM33XX_CM_PER_TPCC_CLKCTRL_OFFSET); + CLKCTRL(am33xx_tptc0_hwmod, AM33XX_CM_PER_TPTC0_CLKCTRL_OFFSET); + CLKCTRL(am33xx_tptc1_hwmod, AM33XX_CM_PER_TPTC1_CLKCTRL_OFFSET); + CLKCTRL(am33xx_tptc2_hwmod, AM33XX_CM_PER_TPTC2_CLKCTRL_OFFSET); + CLKCTRL(am33xx_gfx_hwmod, AM33XX_CM_GFX_GFX_CLKCTRL_OFFSET); + CLKCTRL(am33xx_cpgmac0_hwmod, AM33XX_CM_PER_CPGMAC0_CLKCTRL_OFFSET); + CLKCTRL(am33xx_pruss_hwmod, AM33XX_CM_PER_PRUSS_CLKCTRL_OFFSET); + CLKCTRL(am33xx_mpu_hwmod , AM33XX_CM_MPU_MPU_CLKCTRL_OFFSET); + CLKCTRL(am33xx_l3_instr_hwmod , AM33XX_CM_PER_L3_INSTR_CLKCTRL_OFFSET); + CLKCTRL(am33xx_ocmcram_hwmod , AM33XX_CM_PER_OCMCRAM_CLKCTRL_OFFSET); + CLKCTRL(am33xx_sha0_hwmod , AM33XX_CM_PER_SHA0_CLKCTRL_OFFSET); + CLKCTRL(am33xx_aes0_hwmod , AM33XX_CM_PER_AES0_CLKCTRL_OFFSET); +} + +static void omap_hwmod_am33xx_rst(void) +{ + RSTCTRL(am33xx_pruss_hwmod, AM33XX_RM_PER_RSTCTRL_OFFSET); + RSTCTRL(am33xx_gfx_hwmod, AM33XX_RM_GFX_RSTCTRL_OFFSET); + RSTST(am33xx_gfx_hwmod, AM33XX_RM_GFX_RSTST_OFFSET); +} + +void omap_hwmod_am33xx_reg(void) +{ + omap_hwmod_am33xx_clkctrl(); + omap_hwmod_am33xx_rst(); +} + +static void omap_hwmod_am43xx_clkctrl(void) +{ + CLKCTRL(am33xx_uart2_hwmod, AM43XX_CM_PER_UART1_CLKCTRL_OFFSET); + CLKCTRL(am33xx_uart3_hwmod, AM43XX_CM_PER_UART2_CLKCTRL_OFFSET); + CLKCTRL(am33xx_uart4_hwmod, AM43XX_CM_PER_UART3_CLKCTRL_OFFSET); + CLKCTRL(am33xx_uart5_hwmod, AM43XX_CM_PER_UART4_CLKCTRL_OFFSET); + CLKCTRL(am33xx_uart6_hwmod, AM43XX_CM_PER_UART5_CLKCTRL_OFFSET); + CLKCTRL(am33xx_dcan0_hwmod, AM43XX_CM_PER_DCAN0_CLKCTRL_OFFSET); + CLKCTRL(am33xx_dcan1_hwmod, AM43XX_CM_PER_DCAN1_CLKCTRL_OFFSET); + CLKCTRL(am33xx_elm_hwmod, AM43XX_CM_PER_ELM_CLKCTRL_OFFSET); + CLKCTRL(am33xx_epwmss0_hwmod, AM43XX_CM_PER_EPWMSS0_CLKCTRL_OFFSET); + CLKCTRL(am33xx_epwmss1_hwmod, AM43XX_CM_PER_EPWMSS1_CLKCTRL_OFFSET); + CLKCTRL(am33xx_epwmss2_hwmod, AM43XX_CM_PER_EPWMSS2_CLKCTRL_OFFSET); + CLKCTRL(am33xx_gpio1_hwmod, AM43XX_CM_PER_GPIO1_CLKCTRL_OFFSET); + CLKCTRL(am33xx_gpio2_hwmod, AM43XX_CM_PER_GPIO2_CLKCTRL_OFFSET); + CLKCTRL(am33xx_gpio3_hwmod, AM43XX_CM_PER_GPIO3_CLKCTRL_OFFSET); + CLKCTRL(am33xx_i2c2_hwmod, AM43XX_CM_PER_I2C1_CLKCTRL_OFFSET); + CLKCTRL(am33xx_i2c3_hwmod, AM43XX_CM_PER_I2C2_CLKCTRL_OFFSET); + CLKCTRL(am33xx_mailbox_hwmod, AM43XX_CM_PER_MAILBOX0_CLKCTRL_OFFSET); + CLKCTRL(am33xx_mcasp0_hwmod, AM43XX_CM_PER_MCASP0_CLKCTRL_OFFSET); + CLKCTRL(am33xx_mcasp1_hwmod, AM43XX_CM_PER_MCASP1_CLKCTRL_OFFSET); + CLKCTRL(am33xx_mmc0_hwmod, AM43XX_CM_PER_MMC0_CLKCTRL_OFFSET); + CLKCTRL(am33xx_mmc1_hwmod, AM43XX_CM_PER_MMC1_CLKCTRL_OFFSET); + CLKCTRL(am33xx_spi0_hwmod, AM43XX_CM_PER_SPI0_CLKCTRL_OFFSET); + CLKCTRL(am33xx_spi1_hwmod, AM43XX_CM_PER_SPI1_CLKCTRL_OFFSET); + CLKCTRL(am33xx_spinlock_hwmod, AM43XX_CM_PER_SPINLOCK_CLKCTRL_OFFSET); + CLKCTRL(am33xx_timer2_hwmod, AM43XX_CM_PER_TIMER2_CLKCTRL_OFFSET); + CLKCTRL(am33xx_timer3_hwmod, AM43XX_CM_PER_TIMER3_CLKCTRL_OFFSET); + CLKCTRL(am33xx_timer4_hwmod, AM43XX_CM_PER_TIMER4_CLKCTRL_OFFSET); + CLKCTRL(am33xx_timer5_hwmod, AM43XX_CM_PER_TIMER5_CLKCTRL_OFFSET); + CLKCTRL(am33xx_timer6_hwmod, AM43XX_CM_PER_TIMER6_CLKCTRL_OFFSET); + CLKCTRL(am33xx_timer7_hwmod, AM43XX_CM_PER_TIMER7_CLKCTRL_OFFSET); + CLKCTRL(am33xx_smartreflex0_hwmod, + AM43XX_CM_WKUP_SMARTREFLEX0_CLKCTRL_OFFSET); + CLKCTRL(am33xx_smartreflex1_hwmod, + AM43XX_CM_WKUP_SMARTREFLEX1_CLKCTRL_OFFSET); + CLKCTRL(am33xx_uart1_hwmod, AM43XX_CM_WKUP_UART0_CLKCTRL_OFFSET); + CLKCTRL(am33xx_timer1_hwmod, AM43XX_CM_WKUP_TIMER1_CLKCTRL_OFFSET); + CLKCTRL(am33xx_i2c1_hwmod, AM43XX_CM_WKUP_I2C0_CLKCTRL_OFFSET); + CLKCTRL(am33xx_wd_timer1_hwmod, AM43XX_CM_WKUP_WDT1_CLKCTRL_OFFSET); + CLKCTRL(am33xx_rtc_hwmod, AM43XX_CM_RTC_RTC_CLKCTRL_OFFSET); + CLKCTRL(am33xx_mmc2_hwmod, AM43XX_CM_PER_MMC2_CLKCTRL_OFFSET); + CLKCTRL(am33xx_gpmc_hwmod, AM43XX_CM_PER_GPMC_CLKCTRL_OFFSET); + CLKCTRL(am33xx_l4_ls_hwmod, AM43XX_CM_PER_L4LS_CLKCTRL_OFFSET); + CLKCTRL(am33xx_l4_wkup_hwmod, AM43XX_CM_WKUP_L4WKUP_CLKCTRL_OFFSET); + CLKCTRL(am33xx_l3_main_hwmod, AM43XX_CM_PER_L3_CLKCTRL_OFFSET); + CLKCTRL(am33xx_tpcc_hwmod, AM43XX_CM_PER_TPCC_CLKCTRL_OFFSET); + CLKCTRL(am33xx_tptc0_hwmod, AM43XX_CM_PER_TPTC0_CLKCTRL_OFFSET); + CLKCTRL(am33xx_tptc1_hwmod, AM43XX_CM_PER_TPTC1_CLKCTRL_OFFSET); + CLKCTRL(am33xx_tptc2_hwmod, AM43XX_CM_PER_TPTC2_CLKCTRL_OFFSET); + CLKCTRL(am33xx_gfx_hwmod, AM43XX_CM_GFX_GFX_CLKCTRL_OFFSET); + CLKCTRL(am33xx_cpgmac0_hwmod, AM43XX_CM_PER_CPGMAC0_CLKCTRL_OFFSET); + CLKCTRL(am33xx_pruss_hwmod, AM43XX_CM_PER_PRUSS_CLKCTRL_OFFSET); + CLKCTRL(am33xx_mpu_hwmod , AM43XX_CM_MPU_MPU_CLKCTRL_OFFSET); + CLKCTRL(am33xx_l3_instr_hwmod , AM43XX_CM_PER_L3_INSTR_CLKCTRL_OFFSET); + CLKCTRL(am33xx_ocmcram_hwmod , AM43XX_CM_PER_OCMCRAM_CLKCTRL_OFFSET); + CLKCTRL(am33xx_sha0_hwmod , AM43XX_CM_PER_SHA0_CLKCTRL_OFFSET); + CLKCTRL(am33xx_aes0_hwmod , AM43XX_CM_PER_AES0_CLKCTRL_OFFSET); +} + +static void omap_hwmod_am43xx_rst(void) +{ + RSTCTRL(am33xx_pruss_hwmod, AM43XX_RM_PER_RSTCTRL_OFFSET); + RSTCTRL(am33xx_gfx_hwmod, AM43XX_RM_GFX_RSTCTRL_OFFSET); + RSTST(am33xx_gfx_hwmod, AM43XX_RM_GFX_RSTST_OFFSET); +} + +void omap_hwmod_am43xx_reg(void) +{ + omap_hwmod_am43xx_clkctrl(); + omap_hwmod_am43xx_rst(); +} diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c index 215894f8910..6b406ca4bd3 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c @@ -29,6 +29,7 @@ #include "i2c.h" #include "mmc.h" #include "wd_timer.h" +#include "omap_hwmod_33xx_43xx_common_data.h" /* * IP blocks @@ -52,7 +53,7 @@ static struct omap_hwmod am33xx_emif_hwmod = { .name = "emif", .class = &am33xx_emif_hwmod_class, .clkdm_name = "l3_clkdm", - .flags = (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET), + .flags = HWMOD_INIT_NO_IDLE, .main_clk = "dpll_ddr_m2_div2_ck", .prcm = { .omap4 = { @@ -62,79 +63,12 @@ static struct omap_hwmod am33xx_emif_hwmod = { }, }; -/* - * 'l3' class - * instance(s): l3_main, l3_s, l3_instr - */ -static struct omap_hwmod_class am33xx_l3_hwmod_class = { - .name = "l3", -}; - -static struct omap_hwmod am33xx_l3_main_hwmod = { - .name = "l3_main", - .class = &am33xx_l3_hwmod_class, - .clkdm_name = "l3_clkdm", - .flags = (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET), - .main_clk = "l3_gclk", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_PER_L3_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* l3_s */ -static struct omap_hwmod am33xx_l3_s_hwmod = { - .name = "l3_s", - .class = &am33xx_l3_hwmod_class, - .clkdm_name = "l3s_clkdm", -}; - -/* l3_instr */ -static struct omap_hwmod am33xx_l3_instr_hwmod = { - .name = "l3_instr", - .class = &am33xx_l3_hwmod_class, - .clkdm_name = "l3_clkdm", - .flags = (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET), - .main_clk = "l3_gclk", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_PER_L3_INSTR_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* - * 'l4' class - * instance(s): l4_ls, l4_hs, l4_wkup, l4_fw - */ -static struct omap_hwmod_class am33xx_l4_hwmod_class = { - .name = "l4", -}; - -/* l4_ls */ -static struct omap_hwmod am33xx_l4_ls_hwmod = { - .name = "l4_ls", - .class = &am33xx_l4_hwmod_class, - .clkdm_name = "l4ls_clkdm", - .flags = (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET), - .main_clk = "l4ls_gclk", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_PER_L4LS_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - /* l4_hs */ static struct omap_hwmod am33xx_l4_hs_hwmod = { .name = "l4_hs", .class = &am33xx_l4_hwmod_class, .clkdm_name = "l4hs_clkdm", - .flags = (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET), + .flags = HWMOD_INIT_NO_IDLE, .main_clk = "l4hs_gclk", .prcm = { .omap4 = { @@ -144,50 +78,6 @@ static struct omap_hwmod am33xx_l4_hs_hwmod = { }, }; - -/* l4_wkup */ -static struct omap_hwmod am33xx_l4_wkup_hwmod = { - .name = "l4_wkup", - .class = &am33xx_l4_hwmod_class, - .clkdm_name = "l4_wkup_clkdm", - .flags = (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET), - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_WKUP_L4WKUP_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* - * 'mpu' class - */ -static struct omap_hwmod_class am33xx_mpu_hwmod_class = { - .name = "mpu", -}; - -static struct omap_hwmod am33xx_mpu_hwmod = { - .name = "mpu", - .class = &am33xx_mpu_hwmod_class, - .clkdm_name = "mpu_clkdm", - .flags = (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET), - .main_clk = "dpll_mpu_m2_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_MPU_MPU_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* - * 'wakeup m3' class - * Wakeup controller sub-system under wakeup domain - */ -static struct omap_hwmod_class am33xx_wkup_m3_hwmod_class = { - .name = "wkup_m3", -}; - static struct omap_hwmod_rst_info am33xx_wkup_m3_resets[] = { { .name = "wkup_m3", .rst_shift = 3, .st_shift = 5 }, }; @@ -213,78 +103,6 @@ static struct omap_hwmod am33xx_wkup_m3_hwmod = { }; /* - * 'pru-icss' class - * Programmable Real-Time Unit and Industrial Communication Subsystem - */ -static struct omap_hwmod_class am33xx_pruss_hwmod_class = { - .name = "pruss", -}; - -static struct omap_hwmod_rst_info am33xx_pruss_resets[] = { - { .name = "pruss", .rst_shift = 1 }, -}; - -/* pru-icss */ -/* Pseudo hwmod for reset control purpose only */ -static struct omap_hwmod am33xx_pruss_hwmod = { - .name = "pruss", - .class = &am33xx_pruss_hwmod_class, - .clkdm_name = "pruss_ocp_clkdm", - .main_clk = "pruss_ocp_gclk", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_PER_PRUSS_CLKCTRL_OFFSET, - .rstctrl_offs = AM33XX_RM_PER_RSTCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .rst_lines = am33xx_pruss_resets, - .rst_lines_cnt = ARRAY_SIZE(am33xx_pruss_resets), -}; - -/* gfx */ -/* Pseudo hwmod for reset control purpose only */ -static struct omap_hwmod_class am33xx_gfx_hwmod_class = { - .name = "gfx", -}; - -static struct omap_hwmod_rst_info am33xx_gfx_resets[] = { - { .name = "gfx", .rst_shift = 0, .st_shift = 0}, -}; - -static struct omap_hwmod am33xx_gfx_hwmod = { - .name = "gfx", - .class = &am33xx_gfx_hwmod_class, - .clkdm_name = "gfx_l3_clkdm", - .main_clk = "gfx_fck_div_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_GFX_GFX_CLKCTRL_OFFSET, - .rstctrl_offs = AM33XX_RM_GFX_RSTCTRL_OFFSET, - .rstst_offs = AM33XX_RM_GFX_RSTST_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .rst_lines = am33xx_gfx_resets, - .rst_lines_cnt = ARRAY_SIZE(am33xx_gfx_resets), -}; - -/* - * 'prcm' class - * power and reset manager (whole prcm infrastructure) - */ -static struct omap_hwmod_class am33xx_prcm_hwmod_class = { - .name = "prcm", -}; - -/* prcm */ -static struct omap_hwmod am33xx_prcm_hwmod = { - .name = "prcm", - .class = &am33xx_prcm_hwmod_class, - .clkdm_name = "l4_wkup_clkdm", -}; - -/* * 'adc/tsc' class * TouchScreen Controller (Anolog-To-Digital Converter) */ @@ -388,79 +206,6 @@ static struct omap_hwmod am33xx_ocpwp_hwmod = { #endif /* - * 'aes0' class - */ -static struct omap_hwmod_class_sysconfig am33xx_aes0_sysc = { - .rev_offs = 0x80, - .sysc_offs = 0x84, - .syss_offs = 0x88, - .sysc_flags = SYSS_HAS_RESET_STATUS, -}; - -static struct omap_hwmod_class am33xx_aes0_hwmod_class = { - .name = "aes0", - .sysc = &am33xx_aes0_sysc, -}; - -static struct omap_hwmod am33xx_aes0_hwmod = { - .name = "aes", - .class = &am33xx_aes0_hwmod_class, - .clkdm_name = "l3_clkdm", - .main_clk = "aes0_fck", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_PER_AES0_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* sha0 HIB2 (the 'P' (public) device) */ -static struct omap_hwmod_class_sysconfig am33xx_sha0_sysc = { - .rev_offs = 0x100, - .sysc_offs = 0x110, - .syss_offs = 0x114, - .sysc_flags = SYSS_HAS_RESET_STATUS, -}; - -static struct omap_hwmod_class am33xx_sha0_hwmod_class = { - .name = "sha0", - .sysc = &am33xx_sha0_sysc, -}; - -static struct omap_hwmod am33xx_sha0_hwmod = { - .name = "sham", - .class = &am33xx_sha0_hwmod_class, - .clkdm_name = "l3_clkdm", - .main_clk = "l3_gclk", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_PER_SHA0_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* ocmcram */ -static struct omap_hwmod_class am33xx_ocmcram_hwmod_class = { - .name = "ocmcram", -}; - -static struct omap_hwmod am33xx_ocmcram_hwmod = { - .name = "ocmcram", - .class = &am33xx_ocmcram_hwmod_class, - .clkdm_name = "l3_clkdm", - .flags = (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET), - .main_clk = "l3_gclk", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_PER_OCMCRAM_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* * 'debugss' class * debug sub system */ @@ -488,51 +233,11 @@ static struct omap_hwmod am33xx_debugss_hwmod = { .opt_clks_cnt = ARRAY_SIZE(debugss_opt_clks), }; -/* 'smartreflex' class */ -static struct omap_hwmod_class am33xx_smartreflex_hwmod_class = { - .name = "smartreflex", -}; - -/* smartreflex0 */ -static struct omap_hwmod am33xx_smartreflex0_hwmod = { - .name = "smartreflex0", - .class = &am33xx_smartreflex_hwmod_class, - .clkdm_name = "l4_wkup_clkdm", - .main_clk = "smartreflex0_fck", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_WKUP_SMARTREFLEX0_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* smartreflex1 */ -static struct omap_hwmod am33xx_smartreflex1_hwmod = { - .name = "smartreflex1", - .class = &am33xx_smartreflex_hwmod_class, - .clkdm_name = "l4_wkup_clkdm", - .main_clk = "smartreflex1_fck", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_WKUP_SMARTREFLEX1_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* - * 'control' module class - */ -static struct omap_hwmod_class am33xx_control_hwmod_class = { - .name = "control", -}; - static struct omap_hwmod am33xx_control_hwmod = { .name = "control", .class = &am33xx_control_hwmod_class, .clkdm_name = "l4_wkup_clkdm", - .flags = (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET), + .flags = HWMOD_INIT_NO_IDLE, .main_clk = "dpll_core_m4_div2_ck", .prcm = { .omap4 = { @@ -542,288 +247,6 @@ static struct omap_hwmod am33xx_control_hwmod = { }, }; -/* - * 'cpgmac' class - * cpsw/cpgmac sub system - */ -static struct omap_hwmod_class_sysconfig am33xx_cpgmac_sysc = { - .rev_offs = 0x0, - .sysc_offs = 0x8, - .syss_offs = 0x4, - .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE | - SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | MSTANDBY_FORCE | - MSTANDBY_NO), - .sysc_fields = &omap_hwmod_sysc_type3, -}; - -static struct omap_hwmod_class am33xx_cpgmac0_hwmod_class = { - .name = "cpgmac0", - .sysc = &am33xx_cpgmac_sysc, -}; - -static struct omap_hwmod am33xx_cpgmac0_hwmod = { - .name = "cpgmac0", - .class = &am33xx_cpgmac0_hwmod_class, - .clkdm_name = "cpsw_125mhz_clkdm", - .flags = (HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY), - .main_clk = "cpsw_125mhz_gclk", - .mpu_rt_idx = 1, - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_PER_CPGMAC0_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* - * mdio class - */ -static struct omap_hwmod_class am33xx_mdio_hwmod_class = { - .name = "davinci_mdio", -}; - -static struct omap_hwmod am33xx_mdio_hwmod = { - .name = "davinci_mdio", - .class = &am33xx_mdio_hwmod_class, - .clkdm_name = "cpsw_125mhz_clkdm", - .main_clk = "cpsw_125mhz_gclk", -}; - -/* - * dcan class - */ -static struct omap_hwmod_class am33xx_dcan_hwmod_class = { - .name = "d_can", -}; - -/* dcan0 */ -static struct omap_hwmod am33xx_dcan0_hwmod = { - .name = "d_can0", - .class = &am33xx_dcan_hwmod_class, - .clkdm_name = "l4ls_clkdm", - .main_clk = "dcan0_fck", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_PER_DCAN0_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* dcan1 */ -static struct omap_hwmod am33xx_dcan1_hwmod = { - .name = "d_can1", - .class = &am33xx_dcan_hwmod_class, - .clkdm_name = "l4ls_clkdm", - .main_clk = "dcan1_fck", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_PER_DCAN1_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* elm */ -static struct omap_hwmod_class_sysconfig am33xx_elm_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE | - SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class am33xx_elm_hwmod_class = { - .name = "elm", - .sysc = &am33xx_elm_sysc, -}; - -static struct omap_hwmod am33xx_elm_hwmod = { - .name = "elm", - .class = &am33xx_elm_hwmod_class, - .clkdm_name = "l4ls_clkdm", - .main_clk = "l4ls_gclk", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_PER_ELM_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* pwmss */ -static struct omap_hwmod_class_sysconfig am33xx_epwmss_sysc = { - .rev_offs = 0x0, - .sysc_offs = 0x4, - .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO | - MSTANDBY_SMART | MSTANDBY_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type2, -}; - -static struct omap_hwmod_class am33xx_epwmss_hwmod_class = { - .name = "epwmss", - .sysc = &am33xx_epwmss_sysc, -}; - -static struct omap_hwmod_class am33xx_ecap_hwmod_class = { - .name = "ecap", -}; - -static struct omap_hwmod_class am33xx_eqep_hwmod_class = { - .name = "eqep", -}; - -static struct omap_hwmod_class am33xx_ehrpwm_hwmod_class = { - .name = "ehrpwm", -}; - -/* epwmss0 */ -static struct omap_hwmod am33xx_epwmss0_hwmod = { - .name = "epwmss0", - .class = &am33xx_epwmss_hwmod_class, - .clkdm_name = "l4ls_clkdm", - .main_clk = "l4ls_gclk", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_PER_EPWMSS0_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* ecap0 */ -static struct omap_hwmod am33xx_ecap0_hwmod = { - .name = "ecap0", - .class = &am33xx_ecap_hwmod_class, - .clkdm_name = "l4ls_clkdm", - .main_clk = "l4ls_gclk", -}; - -/* eqep0 */ -static struct omap_hwmod am33xx_eqep0_hwmod = { - .name = "eqep0", - .class = &am33xx_eqep_hwmod_class, - .clkdm_name = "l4ls_clkdm", - .main_clk = "l4ls_gclk", -}; - -/* ehrpwm0 */ -static struct omap_hwmod am33xx_ehrpwm0_hwmod = { - .name = "ehrpwm0", - .class = &am33xx_ehrpwm_hwmod_class, - .clkdm_name = "l4ls_clkdm", - .main_clk = "l4ls_gclk", -}; - -/* epwmss1 */ -static struct omap_hwmod am33xx_epwmss1_hwmod = { - .name = "epwmss1", - .class = &am33xx_epwmss_hwmod_class, - .clkdm_name = "l4ls_clkdm", - .main_clk = "l4ls_gclk", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_PER_EPWMSS1_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* ecap1 */ -static struct omap_hwmod am33xx_ecap1_hwmod = { - .name = "ecap1", - .class = &am33xx_ecap_hwmod_class, - .clkdm_name = "l4ls_clkdm", - .main_clk = "l4ls_gclk", -}; - -/* eqep1 */ -static struct omap_hwmod am33xx_eqep1_hwmod = { - .name = "eqep1", - .class = &am33xx_eqep_hwmod_class, - .clkdm_name = "l4ls_clkdm", - .main_clk = "l4ls_gclk", -}; - -/* ehrpwm1 */ -static struct omap_hwmod am33xx_ehrpwm1_hwmod = { - .name = "ehrpwm1", - .class = &am33xx_ehrpwm_hwmod_class, - .clkdm_name = "l4ls_clkdm", - .main_clk = "l4ls_gclk", -}; - -/* epwmss2 */ -static struct omap_hwmod am33xx_epwmss2_hwmod = { - .name = "epwmss2", - .class = &am33xx_epwmss_hwmod_class, - .clkdm_name = "l4ls_clkdm", - .main_clk = "l4ls_gclk", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_PER_EPWMSS2_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* ecap2 */ -static struct omap_hwmod am33xx_ecap2_hwmod = { - .name = "ecap2", - .class = &am33xx_ecap_hwmod_class, - .clkdm_name = "l4ls_clkdm", - .main_clk = "l4ls_gclk", -}; - -/* eqep2 */ -static struct omap_hwmod am33xx_eqep2_hwmod = { - .name = "eqep2", - .class = &am33xx_eqep_hwmod_class, - .clkdm_name = "l4ls_clkdm", - .main_clk = "l4ls_gclk", -}; - -/* ehrpwm2 */ -static struct omap_hwmod am33xx_ehrpwm2_hwmod = { - .name = "ehrpwm2", - .class = &am33xx_ehrpwm_hwmod_class, - .clkdm_name = "l4ls_clkdm", - .main_clk = "l4ls_gclk", -}; - -/* - * 'gpio' class: for gpio 0,1,2,3 - */ -static struct omap_hwmod_class_sysconfig am33xx_gpio_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0114, - .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_ENAWAKEUP | - SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | - SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class am33xx_gpio_hwmod_class = { - .name = "gpio", - .sysc = &am33xx_gpio_sysc, - .rev = 2, -}; - -static struct omap_gpio_dev_attr gpio_dev_attr = { - .bank_width = 32, - .dbck_flag = true, -}; - /* gpio0 */ static struct omap_hwmod_opt_clk gpio0_opt_clks[] = { { .role = "dbclk", .clk = "gpio0_dbclk" }, @@ -846,174 +269,6 @@ static struct omap_hwmod am33xx_gpio0_hwmod = { .dev_attr = &gpio_dev_attr, }; -/* gpio1 */ -static struct omap_hwmod_opt_clk gpio1_opt_clks[] = { - { .role = "dbclk", .clk = "gpio1_dbclk" }, -}; - -static struct omap_hwmod am33xx_gpio1_hwmod = { - .name = "gpio2", - .class = &am33xx_gpio_hwmod_class, - .clkdm_name = "l4ls_clkdm", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .main_clk = "l4ls_gclk", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_PER_GPIO1_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .opt_clks = gpio1_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(gpio1_opt_clks), - .dev_attr = &gpio_dev_attr, -}; - -/* gpio2 */ -static struct omap_hwmod_opt_clk gpio2_opt_clks[] = { - { .role = "dbclk", .clk = "gpio2_dbclk" }, -}; - -static struct omap_hwmod am33xx_gpio2_hwmod = { - .name = "gpio3", - .class = &am33xx_gpio_hwmod_class, - .clkdm_name = "l4ls_clkdm", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .main_clk = "l4ls_gclk", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_PER_GPIO2_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .opt_clks = gpio2_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(gpio2_opt_clks), - .dev_attr = &gpio_dev_attr, -}; - -/* gpio3 */ -static struct omap_hwmod_opt_clk gpio3_opt_clks[] = { - { .role = "dbclk", .clk = "gpio3_dbclk" }, -}; - -static struct omap_hwmod am33xx_gpio3_hwmod = { - .name = "gpio4", - .class = &am33xx_gpio_hwmod_class, - .clkdm_name = "l4ls_clkdm", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .main_clk = "l4ls_gclk", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_PER_GPIO3_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .opt_clks = gpio3_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(gpio3_opt_clks), - .dev_attr = &gpio_dev_attr, -}; - -/* gpmc */ -static struct omap_hwmod_class_sysconfig gpmc_sysc = { - .rev_offs = 0x0, - .sysc_offs = 0x10, - .syss_offs = 0x14, - .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class am33xx_gpmc_hwmod_class = { - .name = "gpmc", - .sysc = &gpmc_sysc, -}; - -static struct omap_hwmod am33xx_gpmc_hwmod = { - .name = "gpmc", - .class = &am33xx_gpmc_hwmod_class, - .clkdm_name = "l3s_clkdm", - .flags = (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET), - .main_clk = "l3s_gclk", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_PER_GPMC_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* 'i2c' class */ -static struct omap_hwmod_class_sysconfig am33xx_i2c_sysc = { - .sysc_offs = 0x0010, - .syss_offs = 0x0090, - .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY | - SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class i2c_class = { - .name = "i2c", - .sysc = &am33xx_i2c_sysc, - .rev = OMAP_I2C_IP_VERSION_2, - .reset = &omap_i2c_reset, -}; - -static struct omap_i2c_dev_attr i2c_dev_attr = { - .flags = OMAP_I2C_FLAG_BUS_SHIFT_NONE, -}; - -/* i2c1 */ -static struct omap_hwmod am33xx_i2c1_hwmod = { - .name = "i2c1", - .class = &i2c_class, - .clkdm_name = "l4_wkup_clkdm", - .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, - .main_clk = "dpll_per_m2_div4_wkupdm_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_WKUP_I2C0_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .dev_attr = &i2c_dev_attr, -}; - -/* i2c1 */ -static struct omap_hwmod am33xx_i2c2_hwmod = { - .name = "i2c2", - .class = &i2c_class, - .clkdm_name = "l4ls_clkdm", - .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, - .main_clk = "dpll_per_m2_div4_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_PER_I2C1_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .dev_attr = &i2c_dev_attr, -}; - -/* i2c3 */ -static struct omap_hwmod am33xx_i2c3_hwmod = { - .name = "i2c3", - .class = &i2c_class, - .clkdm_name = "l4ls_clkdm", - .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, - .main_clk = "dpll_per_m2_div4_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_PER_I2C2_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .dev_attr = &i2c_dev_attr, -}; - - /* lcdc */ static struct omap_hwmod_class_sysconfig lcdc_sysc = { .rev_offs = 0x0, @@ -1043,600 +298,6 @@ static struct omap_hwmod am33xx_lcdc_hwmod = { }; /* - * 'mailbox' class - * mailbox module allowing communication between the on-chip processors using a - * queued mailbox-interrupt mechanism. - */ -static struct omap_hwmod_class_sysconfig am33xx_mailbox_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .sysc_flags = (SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), - .sysc_fields = &omap_hwmod_sysc_type2, -}; - -static struct omap_hwmod_class am33xx_mailbox_hwmod_class = { - .name = "mailbox", - .sysc = &am33xx_mailbox_sysc, -}; - -static struct omap_hwmod am33xx_mailbox_hwmod = { - .name = "mailbox", - .class = &am33xx_mailbox_hwmod_class, - .clkdm_name = "l4ls_clkdm", - .main_clk = "l4ls_gclk", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_PER_MAILBOX0_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* - * 'mcasp' class - */ -static struct omap_hwmod_class_sysconfig am33xx_mcasp_sysc = { - .rev_offs = 0x0, - .sysc_offs = 0x4, - .sysc_flags = SYSC_HAS_SIDLEMODE, - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), - .sysc_fields = &omap_hwmod_sysc_type3, -}; - -static struct omap_hwmod_class am33xx_mcasp_hwmod_class = { - .name = "mcasp", - .sysc = &am33xx_mcasp_sysc, -}; - -/* mcasp0 */ -static struct omap_hwmod am33xx_mcasp0_hwmod = { - .name = "mcasp0", - .class = &am33xx_mcasp_hwmod_class, - .clkdm_name = "l3s_clkdm", - .main_clk = "mcasp0_fck", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_PER_MCASP0_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* mcasp1 */ -static struct omap_hwmod am33xx_mcasp1_hwmod = { - .name = "mcasp1", - .class = &am33xx_mcasp_hwmod_class, - .clkdm_name = "l3s_clkdm", - .main_clk = "mcasp1_fck", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_PER_MCASP1_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* 'mmc' class */ -static struct omap_hwmod_class_sysconfig am33xx_mmc_sysc = { - .rev_offs = 0x1fc, - .sysc_offs = 0x10, - .syss_offs = 0x14, - .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE | - SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET | - SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class am33xx_mmc_hwmod_class = { - .name = "mmc", - .sysc = &am33xx_mmc_sysc, -}; - -/* mmc0 */ -static struct omap_mmc_dev_attr am33xx_mmc0_dev_attr = { - .flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT, -}; - -static struct omap_hwmod am33xx_mmc0_hwmod = { - .name = "mmc1", - .class = &am33xx_mmc_hwmod_class, - .clkdm_name = "l4ls_clkdm", - .main_clk = "mmc_clk", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_PER_MMC0_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .dev_attr = &am33xx_mmc0_dev_attr, -}; - -/* mmc1 */ -static struct omap_mmc_dev_attr am33xx_mmc1_dev_attr = { - .flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT, -}; - -static struct omap_hwmod am33xx_mmc1_hwmod = { - .name = "mmc2", - .class = &am33xx_mmc_hwmod_class, - .clkdm_name = "l4ls_clkdm", - .main_clk = "mmc_clk", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_PER_MMC1_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .dev_attr = &am33xx_mmc1_dev_attr, -}; - -/* mmc2 */ -static struct omap_mmc_dev_attr am33xx_mmc2_dev_attr = { - .flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT, -}; -static struct omap_hwmod am33xx_mmc2_hwmod = { - .name = "mmc3", - .class = &am33xx_mmc_hwmod_class, - .clkdm_name = "l3s_clkdm", - .main_clk = "mmc_clk", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_PER_MMC2_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .dev_attr = &am33xx_mmc2_dev_attr, -}; - -/* - * 'rtc' class - * rtc subsystem - */ -static struct omap_hwmod_class_sysconfig am33xx_rtc_sysc = { - .rev_offs = 0x0074, - .sysc_offs = 0x0078, - .sysc_flags = SYSC_HAS_SIDLEMODE, - .idlemodes = (SIDLE_FORCE | SIDLE_NO | - SIDLE_SMART | SIDLE_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type3, -}; - -static struct omap_hwmod_class am33xx_rtc_hwmod_class = { - .name = "rtc", - .sysc = &am33xx_rtc_sysc, -}; - -static struct omap_hwmod am33xx_rtc_hwmod = { - .name = "rtc", - .class = &am33xx_rtc_hwmod_class, - .clkdm_name = "l4_rtc_clkdm", - .main_clk = "clk_32768_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_RTC_RTC_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* 'spi' class */ -static struct omap_hwmod_class_sysconfig am33xx_mcspi_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0110, - .syss_offs = 0x0114, - .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE | - SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class am33xx_spi_hwmod_class = { - .name = "mcspi", - .sysc = &am33xx_mcspi_sysc, - .rev = OMAP4_MCSPI_REV, -}; - -/* spi0 */ -static struct omap2_mcspi_dev_attr mcspi_attrib = { - .num_chipselect = 2, -}; -static struct omap_hwmod am33xx_spi0_hwmod = { - .name = "spi0", - .class = &am33xx_spi_hwmod_class, - .clkdm_name = "l4ls_clkdm", - .main_clk = "dpll_per_m2_div4_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_PER_SPI0_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .dev_attr = &mcspi_attrib, -}; - -/* spi1 */ -static struct omap_hwmod am33xx_spi1_hwmod = { - .name = "spi1", - .class = &am33xx_spi_hwmod_class, - .clkdm_name = "l4ls_clkdm", - .main_clk = "dpll_per_m2_div4_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_PER_SPI1_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .dev_attr = &mcspi_attrib, -}; - -/* - * 'spinlock' class - * spinlock provides hardware assistance for synchronizing the - * processes running on multiple processors - */ -static struct omap_hwmod_class am33xx_spinlock_hwmod_class = { - .name = "spinlock", -}; - -static struct omap_hwmod am33xx_spinlock_hwmod = { - .name = "spinlock", - .class = &am33xx_spinlock_hwmod_class, - .clkdm_name = "l4ls_clkdm", - .main_clk = "l4ls_gclk", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_PER_SPINLOCK_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* 'timer 2-7' class */ -static struct omap_hwmod_class_sysconfig am33xx_timer_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type2, -}; - -static struct omap_hwmod_class am33xx_timer_hwmod_class = { - .name = "timer", - .sysc = &am33xx_timer_sysc, -}; - -/* timer1 1ms */ -static struct omap_hwmod_class_sysconfig am33xx_timer1ms_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE | - SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class am33xx_timer1ms_hwmod_class = { - .name = "timer", - .sysc = &am33xx_timer1ms_sysc, -}; - -static struct omap_hwmod am33xx_timer1_hwmod = { - .name = "timer1", - .class = &am33xx_timer1ms_hwmod_class, - .clkdm_name = "l4_wkup_clkdm", - .main_clk = "timer1_fck", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_WKUP_TIMER1_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -static struct omap_hwmod am33xx_timer2_hwmod = { - .name = "timer2", - .class = &am33xx_timer_hwmod_class, - .clkdm_name = "l4ls_clkdm", - .main_clk = "timer2_fck", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_PER_TIMER2_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -static struct omap_hwmod am33xx_timer3_hwmod = { - .name = "timer3", - .class = &am33xx_timer_hwmod_class, - .clkdm_name = "l4ls_clkdm", - .main_clk = "timer3_fck", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_PER_TIMER3_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -static struct omap_hwmod am33xx_timer4_hwmod = { - .name = "timer4", - .class = &am33xx_timer_hwmod_class, - .clkdm_name = "l4ls_clkdm", - .main_clk = "timer4_fck", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_PER_TIMER4_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -static struct omap_hwmod am33xx_timer5_hwmod = { - .name = "timer5", - .class = &am33xx_timer_hwmod_class, - .clkdm_name = "l4ls_clkdm", - .main_clk = "timer5_fck", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_PER_TIMER5_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -static struct omap_hwmod am33xx_timer6_hwmod = { - .name = "timer6", - .class = &am33xx_timer_hwmod_class, - .clkdm_name = "l4ls_clkdm", - .main_clk = "timer6_fck", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_PER_TIMER6_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -static struct omap_hwmod am33xx_timer7_hwmod = { - .name = "timer7", - .class = &am33xx_timer_hwmod_class, - .clkdm_name = "l4ls_clkdm", - .main_clk = "timer7_fck", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_PER_TIMER7_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* tpcc */ -static struct omap_hwmod_class am33xx_tpcc_hwmod_class = { - .name = "tpcc", -}; - -static struct omap_hwmod am33xx_tpcc_hwmod = { - .name = "tpcc", - .class = &am33xx_tpcc_hwmod_class, - .clkdm_name = "l3_clkdm", - .main_clk = "l3_gclk", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_PER_TPCC_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -static struct omap_hwmod_class_sysconfig am33xx_tptc_sysc = { - .rev_offs = 0x0, - .sysc_offs = 0x10, - .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | - SYSC_HAS_MIDLEMODE), - .idlemodes = (SIDLE_FORCE | SIDLE_SMART | MSTANDBY_FORCE), - .sysc_fields = &omap_hwmod_sysc_type2, -}; - -/* 'tptc' class */ -static struct omap_hwmod_class am33xx_tptc_hwmod_class = { - .name = "tptc", - .sysc = &am33xx_tptc_sysc, -}; - -/* tptc0 */ -static struct omap_hwmod am33xx_tptc0_hwmod = { - .name = "tptc0", - .class = &am33xx_tptc_hwmod_class, - .clkdm_name = "l3_clkdm", - .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY, - .main_clk = "l3_gclk", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_PER_TPTC0_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* tptc1 */ -static struct omap_hwmod am33xx_tptc1_hwmod = { - .name = "tptc1", - .class = &am33xx_tptc_hwmod_class, - .clkdm_name = "l3_clkdm", - .flags = (HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY), - .main_clk = "l3_gclk", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_PER_TPTC1_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* tptc2 */ -static struct omap_hwmod am33xx_tptc2_hwmod = { - .name = "tptc2", - .class = &am33xx_tptc_hwmod_class, - .clkdm_name = "l3_clkdm", - .flags = (HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY), - .main_clk = "l3_gclk", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_PER_TPTC2_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* 'uart' class */ -static struct omap_hwmod_class_sysconfig uart_sysc = { - .rev_offs = 0x50, - .sysc_offs = 0x54, - .syss_offs = 0x58, - .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_ENAWAKEUP | - SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class uart_class = { - .name = "uart", - .sysc = &uart_sysc, -}; - -/* uart1 */ -static struct omap_hwmod am33xx_uart1_hwmod = { - .name = "uart1", - .class = &uart_class, - .clkdm_name = "l4_wkup_clkdm", - .flags = DEBUG_AM33XXUART1_FLAGS | HWMOD_SWSUP_SIDLE_ACT, - .main_clk = "dpll_per_m2_div4_wkupdm_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_WKUP_UART0_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -static struct omap_hwmod am33xx_uart2_hwmod = { - .name = "uart2", - .class = &uart_class, - .clkdm_name = "l4ls_clkdm", - .flags = HWMOD_SWSUP_SIDLE_ACT, - .main_clk = "dpll_per_m2_div4_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_PER_UART1_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* uart3 */ -static struct omap_hwmod am33xx_uart3_hwmod = { - .name = "uart3", - .class = &uart_class, - .clkdm_name = "l4ls_clkdm", - .flags = HWMOD_SWSUP_SIDLE_ACT, - .main_clk = "dpll_per_m2_div4_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_PER_UART2_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -static struct omap_hwmod am33xx_uart4_hwmod = { - .name = "uart4", - .class = &uart_class, - .clkdm_name = "l4ls_clkdm", - .flags = HWMOD_SWSUP_SIDLE_ACT, - .main_clk = "dpll_per_m2_div4_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_PER_UART3_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -static struct omap_hwmod am33xx_uart5_hwmod = { - .name = "uart5", - .class = &uart_class, - .clkdm_name = "l4ls_clkdm", - .flags = HWMOD_SWSUP_SIDLE_ACT, - .main_clk = "dpll_per_m2_div4_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_PER_UART4_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -static struct omap_hwmod am33xx_uart6_hwmod = { - .name = "uart6", - .class = &uart_class, - .clkdm_name = "l4ls_clkdm", - .flags = HWMOD_SWSUP_SIDLE_ACT, - .main_clk = "dpll_per_m2_div4_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_PER_UART5_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* 'wd_timer' class */ -static struct omap_hwmod_class_sysconfig wdt_sysc = { - .rev_offs = 0x0, - .sysc_offs = 0x10, - .syss_offs = 0x14, - .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class am33xx_wd_timer_hwmod_class = { - .name = "wd_timer", - .sysc = &wdt_sysc, - .pre_shutdown = &omap2_wd_timer_disable, -}; - -/* - * XXX: device.c file uses hardcoded name for watchdog timer - * driver "wd_timer2, so we are also using same name as of now... - */ -static struct omap_hwmod am33xx_wd_timer1_hwmod = { - .name = "wd_timer2", - .class = &am33xx_wd_timer_hwmod_class, - .clkdm_name = "l4_wkup_clkdm", - .flags = HWMOD_SWSUP_SIDLE, - .main_clk = "wdt1_fck", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_WKUP_WDT1_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* * 'usb_otg' class * high-speed on-the-go universal serial bus (usb_otg) controller */ @@ -1690,14 +351,6 @@ static struct omap_hwmod_ocp_if am33xx_l3_main__emif = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* mpu -> l3 main */ -static struct omap_hwmod_ocp_if am33xx_mpu__l3_main = { - .master = &am33xx_mpu_hwmod, - .slave = &am33xx_l3_main_hwmod, - .clk = "dpll_mpu_m2_ck", - .user = OCP_USER_MPU, -}; - /* l3 main -> l4 hs */ static struct omap_hwmod_ocp_if am33xx_l3_main__l4_hs = { .master = &am33xx_l3_main_hwmod, @@ -1706,62 +359,6 @@ static struct omap_hwmod_ocp_if am33xx_l3_main__l4_hs = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l3 main -> l3 s */ -static struct omap_hwmod_ocp_if am33xx_l3_main__l3_s = { - .master = &am33xx_l3_main_hwmod, - .slave = &am33xx_l3_s_hwmod, - .clk = "l3s_gclk", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3 s -> l4 per/ls */ -static struct omap_hwmod_ocp_if am33xx_l3_s__l4_ls = { - .master = &am33xx_l3_s_hwmod, - .slave = &am33xx_l4_ls_hwmod, - .clk = "l3s_gclk", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3 s -> l4 wkup */ -static struct omap_hwmod_ocp_if am33xx_l3_s__l4_wkup = { - .master = &am33xx_l3_s_hwmod, - .slave = &am33xx_l4_wkup_hwmod, - .clk = "l3s_gclk", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3 main -> l3 instr */ -static struct omap_hwmod_ocp_if am33xx_l3_main__l3_instr = { - .master = &am33xx_l3_main_hwmod, - .slave = &am33xx_l3_instr_hwmod, - .clk = "l3s_gclk", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* mpu -> prcm */ -static struct omap_hwmod_ocp_if am33xx_mpu__prcm = { - .master = &am33xx_mpu_hwmod, - .slave = &am33xx_prcm_hwmod, - .clk = "dpll_mpu_m2_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3 s -> l3 main*/ -static struct omap_hwmod_ocp_if am33xx_l3_s__l3_main = { - .master = &am33xx_l3_s_hwmod, - .slave = &am33xx_l3_main_hwmod, - .clk = "l3s_gclk", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* pru-icss -> l3 main */ -static struct omap_hwmod_ocp_if am33xx_pruss__l3_main = { - .master = &am33xx_pruss_hwmod, - .slave = &am33xx_l3_main_hwmod, - .clk = "l3_gclk", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* wkup m3 -> l4 wkup */ static struct omap_hwmod_ocp_if am33xx_wkup_m3__l4_wkup = { .master = &am33xx_wkup_m3_hwmod, @@ -1770,14 +367,6 @@ static struct omap_hwmod_ocp_if am33xx_wkup_m3__l4_wkup = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* gfx -> l3 main */ -static struct omap_hwmod_ocp_if am33xx_gfx__l3_main = { - .master = &am33xx_gfx_hwmod, - .slave = &am33xx_l3_main_hwmod, - .clk = "dpll_core_m4_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l4 wkup -> wkup m3 */ static struct omap_hwmod_ocp_if am33xx_l4_wkup__wkup_m3 = { .master = &am33xx_l4_wkup_hwmod, @@ -1794,14 +383,6 @@ static struct omap_hwmod_ocp_if am33xx_l4_hs__pruss = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l3 main -> gfx */ -static struct omap_hwmod_ocp_if am33xx_l3_main__gfx = { - .master = &am33xx_l3_main_hwmod, - .slave = &am33xx_gfx_hwmod, - .clk = "dpll_core_m4_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l3_main -> debugss */ static struct omap_hwmod_addr_space am33xx_debugss_addrs[] = { { @@ -1844,54 +425,6 @@ static struct omap_hwmod_ocp_if am33xx_l4_wkup__control = { .user = OCP_USER_MPU, }; -/* l4 wkup -> rtc */ -static struct omap_hwmod_ocp_if am33xx_l4_wkup__rtc = { - .master = &am33xx_l4_wkup_hwmod, - .slave = &am33xx_rtc_hwmod, - .clk = "clkdiv32k_ick", - .user = OCP_USER_MPU, -}; - -/* l4 per/ls -> DCAN0 */ -static struct omap_hwmod_ocp_if am33xx_l4_per__dcan0 = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am33xx_dcan0_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4 per/ls -> DCAN1 */ -static struct omap_hwmod_ocp_if am33xx_l4_per__dcan1 = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am33xx_dcan1_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4 per/ls -> GPIO2 */ -static struct omap_hwmod_ocp_if am33xx_l4_per__gpio1 = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am33xx_gpio1_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4 per/ls -> gpio3 */ -static struct omap_hwmod_ocp_if am33xx_l4_per__gpio2 = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am33xx_gpio2_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4 per/ls -> gpio4 */ -static struct omap_hwmod_ocp_if am33xx_l4_per__gpio3 = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am33xx_gpio3_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* L4 WKUP -> I2C1 */ static struct omap_hwmod_ocp_if am33xx_l4_wkup__i2c1 = { .master = &am33xx_l4_wkup_hwmod, @@ -1933,177 +466,6 @@ static struct omap_hwmod_ocp_if am33xx_l4_hs__cpgmac0 = { .user = OCP_USER_MPU, }; -static struct omap_hwmod_ocp_if am33xx_cpgmac0__mdio = { - .master = &am33xx_cpgmac0_hwmod, - .slave = &am33xx_mdio_hwmod, - .user = OCP_USER_MPU, -}; - -static struct omap_hwmod_addr_space am33xx_elm_addr_space[] = { - { - .pa_start = 0x48080000, - .pa_end = 0x48080000 + SZ_8K - 1, - .flags = ADDR_TYPE_RT - }, - { } -}; - -static struct omap_hwmod_ocp_if am33xx_l4_ls__elm = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am33xx_elm_hwmod, - .clk = "l4ls_gclk", - .addr = am33xx_elm_addr_space, - .user = OCP_USER_MPU, -}; - -static struct omap_hwmod_addr_space am33xx_epwmss0_addr_space[] = { - { - .pa_start = 0x48300000, - .pa_end = 0x48300000 + SZ_16 - 1, - .flags = ADDR_TYPE_RT - }, - { } -}; - -static struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss0 = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am33xx_epwmss0_hwmod, - .clk = "l4ls_gclk", - .addr = am33xx_epwmss0_addr_space, - .user = OCP_USER_MPU, -}; - -static struct omap_hwmod_ocp_if am33xx_epwmss0__ecap0 = { - .master = &am33xx_epwmss0_hwmod, - .slave = &am33xx_ecap0_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU, -}; - -static struct omap_hwmod_ocp_if am33xx_epwmss0__eqep0 = { - .master = &am33xx_epwmss0_hwmod, - .slave = &am33xx_eqep0_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU, -}; - -static struct omap_hwmod_ocp_if am33xx_epwmss0__ehrpwm0 = { - .master = &am33xx_epwmss0_hwmod, - .slave = &am33xx_ehrpwm0_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU, -}; - - -static struct omap_hwmod_addr_space am33xx_epwmss1_addr_space[] = { - { - .pa_start = 0x48302000, - .pa_end = 0x48302000 + SZ_16 - 1, - .flags = ADDR_TYPE_RT - }, - { } -}; - -static struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss1 = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am33xx_epwmss1_hwmod, - .clk = "l4ls_gclk", - .addr = am33xx_epwmss1_addr_space, - .user = OCP_USER_MPU, -}; - -static struct omap_hwmod_ocp_if am33xx_epwmss1__ecap1 = { - .master = &am33xx_epwmss1_hwmod, - .slave = &am33xx_ecap1_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU, -}; - -static struct omap_hwmod_ocp_if am33xx_epwmss1__eqep1 = { - .master = &am33xx_epwmss1_hwmod, - .slave = &am33xx_eqep1_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU, -}; - -static struct omap_hwmod_ocp_if am33xx_epwmss1__ehrpwm1 = { - .master = &am33xx_epwmss1_hwmod, - .slave = &am33xx_ehrpwm1_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU, -}; - -static struct omap_hwmod_addr_space am33xx_epwmss2_addr_space[] = { - { - .pa_start = 0x48304000, - .pa_end = 0x48304000 + SZ_16 - 1, - .flags = ADDR_TYPE_RT - }, - { } -}; - -static struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss2 = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am33xx_epwmss2_hwmod, - .clk = "l4ls_gclk", - .addr = am33xx_epwmss2_addr_space, - .user = OCP_USER_MPU, -}; - -static struct omap_hwmod_ocp_if am33xx_epwmss2__ecap2 = { - .master = &am33xx_epwmss2_hwmod, - .slave = &am33xx_ecap2_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU, -}; - -static struct omap_hwmod_ocp_if am33xx_epwmss2__eqep2 = { - .master = &am33xx_epwmss2_hwmod, - .slave = &am33xx_eqep2_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU, -}; - -static struct omap_hwmod_ocp_if am33xx_epwmss2__ehrpwm2 = { - .master = &am33xx_epwmss2_hwmod, - .slave = &am33xx_ehrpwm2_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU, -}; - -/* l3s cfg -> gpmc */ -static struct omap_hwmod_addr_space am33xx_gpmc_addr_space[] = { - { - .pa_start = 0x50000000, - .pa_end = 0x50000000 + SZ_8K - 1, - .flags = ADDR_TYPE_RT, - }, - { } -}; - -static struct omap_hwmod_ocp_if am33xx_l3_s__gpmc = { - .master = &am33xx_l3_s_hwmod, - .slave = &am33xx_gpmc_hwmod, - .clk = "l3s_gclk", - .addr = am33xx_gpmc_addr_space, - .user = OCP_USER_MPU, -}; - -/* i2c2 */ -static struct omap_hwmod_ocp_if am33xx_l4_per__i2c2 = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am33xx_i2c2_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU, -}; - -static struct omap_hwmod_ocp_if am33xx_l4_per__i2c3 = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am33xx_i2c3_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU, -}; - static struct omap_hwmod_addr_space am33xx_lcdc_addr_space[] = { { .pa_start = 0x4830E000, @@ -2121,138 +483,6 @@ static struct omap_hwmod_ocp_if am33xx_l3_main__lcdc = { .user = OCP_USER_MPU, }; -static struct omap_hwmod_addr_space am33xx_mailbox_addrs[] = { - { - .pa_start = 0x480C8000, - .pa_end = 0x480C8000 + (SZ_4K - 1), - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4 ls -> mailbox */ -static struct omap_hwmod_ocp_if am33xx_l4_per__mailbox = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am33xx_mailbox_hwmod, - .clk = "l4ls_gclk", - .addr = am33xx_mailbox_addrs, - .user = OCP_USER_MPU, -}; - -/* l4 ls -> spinlock */ -static struct omap_hwmod_ocp_if am33xx_l4_ls__spinlock = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am33xx_spinlock_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU, -}; - -/* l4 ls -> mcasp0 */ -static struct omap_hwmod_addr_space am33xx_mcasp0_addr_space[] = { - { - .pa_start = 0x48038000, - .pa_end = 0x48038000 + SZ_8K - 1, - .flags = ADDR_TYPE_RT - }, - { } -}; - -static struct omap_hwmod_ocp_if am33xx_l4_ls__mcasp0 = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am33xx_mcasp0_hwmod, - .clk = "l4ls_gclk", - .addr = am33xx_mcasp0_addr_space, - .user = OCP_USER_MPU, -}; - -/* l4 ls -> mcasp1 */ -static struct omap_hwmod_addr_space am33xx_mcasp1_addr_space[] = { - { - .pa_start = 0x4803C000, - .pa_end = 0x4803C000 + SZ_8K - 1, - .flags = ADDR_TYPE_RT - }, - { } -}; - -static struct omap_hwmod_ocp_if am33xx_l4_ls__mcasp1 = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am33xx_mcasp1_hwmod, - .clk = "l4ls_gclk", - .addr = am33xx_mcasp1_addr_space, - .user = OCP_USER_MPU, -}; - -/* l4 ls -> mmc0 */ -static struct omap_hwmod_addr_space am33xx_mmc0_addr_space[] = { - { - .pa_start = 0x48060100, - .pa_end = 0x48060100 + SZ_4K - 1, - .flags = ADDR_TYPE_RT, - }, - { } -}; - -static struct omap_hwmod_ocp_if am33xx_l4_ls__mmc0 = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am33xx_mmc0_hwmod, - .clk = "l4ls_gclk", - .addr = am33xx_mmc0_addr_space, - .user = OCP_USER_MPU, -}; - -/* l4 ls -> mmc1 */ -static struct omap_hwmod_addr_space am33xx_mmc1_addr_space[] = { - { - .pa_start = 0x481d8100, - .pa_end = 0x481d8100 + SZ_4K - 1, - .flags = ADDR_TYPE_RT, - }, - { } -}; - -static struct omap_hwmod_ocp_if am33xx_l4_ls__mmc1 = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am33xx_mmc1_hwmod, - .clk = "l4ls_gclk", - .addr = am33xx_mmc1_addr_space, - .user = OCP_USER_MPU, -}; - -/* l3 s -> mmc2 */ -static struct omap_hwmod_addr_space am33xx_mmc2_addr_space[] = { - { - .pa_start = 0x47810100, - .pa_end = 0x47810100 + SZ_64K - 1, - .flags = ADDR_TYPE_RT, - }, - { } -}; - -static struct omap_hwmod_ocp_if am33xx_l3_s__mmc2 = { - .master = &am33xx_l3_s_hwmod, - .slave = &am33xx_mmc2_hwmod, - .clk = "l3s_gclk", - .addr = am33xx_mmc2_addr_space, - .user = OCP_USER_MPU, -}; - -/* l4 ls -> mcspi0 */ -static struct omap_hwmod_ocp_if am33xx_l4_ls__mcspi0 = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am33xx_spi0_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU, -}; - -/* l4 ls -> mcspi1 */ -static struct omap_hwmod_ocp_if am33xx_l4_ls__mcspi1 = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am33xx_spi1_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU, -}; - /* l4 wkup -> timer1 */ static struct omap_hwmod_ocp_if am33xx_l4_wkup__timer1 = { .master = &am33xx_l4_wkup_hwmod, @@ -2261,116 +491,6 @@ static struct omap_hwmod_ocp_if am33xx_l4_wkup__timer1 = { .user = OCP_USER_MPU, }; -/* l4 per -> timer2 */ -static struct omap_hwmod_ocp_if am33xx_l4_ls__timer2 = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am33xx_timer2_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU, -}; - -/* l4 per -> timer3 */ -static struct omap_hwmod_ocp_if am33xx_l4_ls__timer3 = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am33xx_timer3_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU, -}; - -/* l4 per -> timer4 */ -static struct omap_hwmod_ocp_if am33xx_l4_ls__timer4 = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am33xx_timer4_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU, -}; - -/* l4 per -> timer5 */ -static struct omap_hwmod_ocp_if am33xx_l4_ls__timer5 = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am33xx_timer5_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU, -}; - -/* l4 per -> timer6 */ -static struct omap_hwmod_ocp_if am33xx_l4_ls__timer6 = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am33xx_timer6_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU, -}; - -/* l4 per -> timer7 */ -static struct omap_hwmod_ocp_if am33xx_l4_ls__timer7 = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am33xx_timer7_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU, -}; - -/* l3 main -> tpcc */ -static struct omap_hwmod_ocp_if am33xx_l3_main__tpcc = { - .master = &am33xx_l3_main_hwmod, - .slave = &am33xx_tpcc_hwmod, - .clk = "l3_gclk", - .user = OCP_USER_MPU, -}; - -/* l3 main -> tpcc0 */ -static struct omap_hwmod_addr_space am33xx_tptc0_addr_space[] = { - { - .pa_start = 0x49800000, - .pa_end = 0x49800000 + SZ_8K - 1, - .flags = ADDR_TYPE_RT, - }, - { } -}; - -static struct omap_hwmod_ocp_if am33xx_l3_main__tptc0 = { - .master = &am33xx_l3_main_hwmod, - .slave = &am33xx_tptc0_hwmod, - .clk = "l3_gclk", - .addr = am33xx_tptc0_addr_space, - .user = OCP_USER_MPU, -}; - -/* l3 main -> tpcc1 */ -static struct omap_hwmod_addr_space am33xx_tptc1_addr_space[] = { - { - .pa_start = 0x49900000, - .pa_end = 0x49900000 + SZ_8K - 1, - .flags = ADDR_TYPE_RT, - }, - { } -}; - -static struct omap_hwmod_ocp_if am33xx_l3_main__tptc1 = { - .master = &am33xx_l3_main_hwmod, - .slave = &am33xx_tptc1_hwmod, - .clk = "l3_gclk", - .addr = am33xx_tptc1_addr_space, - .user = OCP_USER_MPU, -}; - -/* l3 main -> tpcc2 */ -static struct omap_hwmod_addr_space am33xx_tptc2_addr_space[] = { - { - .pa_start = 0x49a00000, - .pa_end = 0x49a00000 + SZ_8K - 1, - .flags = ADDR_TYPE_RT, - }, - { } -}; - -static struct omap_hwmod_ocp_if am33xx_l3_main__tptc2 = { - .master = &am33xx_l3_main_hwmod, - .slave = &am33xx_tptc2_hwmod, - .clk = "l3_gclk", - .addr = am33xx_tptc2_addr_space, - .user = OCP_USER_MPU, -}; - /* l4 wkup -> uart1 */ static struct omap_hwmod_ocp_if am33xx_l4_wkup__uart1 = { .master = &am33xx_l4_wkup_hwmod, @@ -2379,46 +499,6 @@ static struct omap_hwmod_ocp_if am33xx_l4_wkup__uart1 = { .user = OCP_USER_MPU, }; -/* l4 ls -> uart2 */ -static struct omap_hwmod_ocp_if am33xx_l4_ls__uart2 = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am33xx_uart2_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU, -}; - -/* l4 ls -> uart3 */ -static struct omap_hwmod_ocp_if am33xx_l4_ls__uart3 = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am33xx_uart3_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU, -}; - -/* l4 ls -> uart4 */ -static struct omap_hwmod_ocp_if am33xx_l4_ls__uart4 = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am33xx_uart4_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU, -}; - -/* l4 ls -> uart5 */ -static struct omap_hwmod_ocp_if am33xx_l4_ls__uart5 = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am33xx_uart5_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU, -}; - -/* l4 ls -> uart6 */ -static struct omap_hwmod_ocp_if am33xx_l4_ls__uart6 = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am33xx_uart6_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU, -}; - /* l4 wkup -> wd_timer1 */ static struct omap_hwmod_ocp_if am33xx_l4_wkup__wd_timer1 = { .master = &am33xx_l4_wkup_hwmod, @@ -2437,47 +517,39 @@ static struct omap_hwmod_ocp_if am33xx_l3_s__usbss = { .flags = OCPIF_SWSUP_IDLE, }; -/* l3 main -> ocmc */ -static struct omap_hwmod_ocp_if am33xx_l3_main__ocmc = { - .master = &am33xx_l3_main_hwmod, - .slave = &am33xx_ocmcram_hwmod, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3 main -> sha0 HIB2 */ -static struct omap_hwmod_addr_space am33xx_sha0_addrs[] = { - { - .pa_start = 0x53100000, - .pa_end = 0x53100000 + SZ_512 - 1, - .flags = ADDR_TYPE_RT - }, - { } +/* rng */ +static struct omap_hwmod_class_sysconfig am33xx_rng_sysc = { + .rev_offs = 0x1fe0, + .sysc_offs = 0x1fe4, + .sysc_flags = SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE, + .idlemodes = SIDLE_FORCE | SIDLE_NO, + .sysc_fields = &omap_hwmod_sysc_type1, }; -static struct omap_hwmod_ocp_if am33xx_l3_main__sha0 = { - .master = &am33xx_l3_main_hwmod, - .slave = &am33xx_sha0_hwmod, - .clk = "sha0_fck", - .addr = am33xx_sha0_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, +static struct omap_hwmod_class am33xx_rng_hwmod_class = { + .name = "rng", + .sysc = &am33xx_rng_sysc, }; -/* l3 main -> AES0 HIB2 */ -static struct omap_hwmod_addr_space am33xx_aes0_addrs[] = { - { - .pa_start = 0x53500000, - .pa_end = 0x53500000 + SZ_1M - 1, - .flags = ADDR_TYPE_RT +static struct omap_hwmod am33xx_rng_hwmod = { + .name = "rng", + .class = &am33xx_rng_hwmod_class, + .clkdm_name = "l4ls_clkdm", + .flags = HWMOD_SWSUP_SIDLE, + .main_clk = "rng_fck", + .prcm = { + .omap4 = { + .clkctrl_offs = AM33XX_CM_PER_RNG_CLKCTRL_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, }, - { } }; -static struct omap_hwmod_ocp_if am33xx_l3_main__aes0 = { - .master = &am33xx_l3_main_hwmod, - .slave = &am33xx_aes0_hwmod, - .clk = "aes0_fck", - .addr = am33xx_aes0_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, +static struct omap_hwmod_ocp_if am33xx_l4_per__rng = { + .master = &am33xx_l4_ls_hwmod, + .slave = &am33xx_rng_hwmod, + .clk = "rng_fck", + .user = OCP_USER_MPU, }; static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[] __initdata = { @@ -2559,11 +631,13 @@ static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[] __initdata = { &am33xx_cpgmac0__mdio, &am33xx_l3_main__sha0, &am33xx_l3_main__aes0, + &am33xx_l4_per__rng, NULL, }; int __init am33xx_hwmod_init(void) { + omap_hwmod_am33xx_reg(); omap_hwmod_init(); return omap_hwmod_register_links(am33xx_hwmod_ocp_ifs); } diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 0c3a427da54..9e56fabd7fa 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -3693,6 +3693,53 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__aes = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; +/* + * 'ssi' class + * synchronous serial interface (multichannel and full-duplex serial if) + */ + +static struct omap_hwmod_class_sysconfig omap34xx_ssi_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_EMUFREE | + SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO | + MSTANDBY_SMART | MSTANDBY_SMART_WKUP), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap34xx_ssi_hwmod_class = { + .name = "ssi", + .sysc = &omap34xx_ssi_sysc, +}; + +static struct omap_hwmod omap34xx_ssi_hwmod = { + .name = "ssi", + .class = &omap34xx_ssi_hwmod_class, + .clkdm_name = "core_l4_clkdm", + .main_clk = "ssi_ssr_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_SSI_SHIFT, + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430ES2_ST_SSI_IDLE_SHIFT, + }, + }, +}; + +/* L4 CORE -> SSI */ +static struct omap_hwmod_ocp_if omap34xx_l4_core__ssi = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap34xx_ssi_hwmod, + .clk = "ssi_ick", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + static struct omap_hwmod_ocp_if *omap3xxx_hwmod_ocp_ifs[] __initdata = { &omap3xxx_l3_main__l4_core, &omap3xxx_l3_main__l4_per, @@ -3818,6 +3865,7 @@ static struct omap_hwmod_ocp_if *omap34xx_hwmod_ocp_ifs[] __initdata = { #ifdef CONFIG_OMAP_IOMMU_IVA2 &omap3xxx_l3_main__mmu_iva, #endif + &omap34xx_l4_core__ssi, NULL }; diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c new file mode 100644 index 00000000000..9002fca7669 --- /dev/null +++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c @@ -0,0 +1,758 @@ +/* + * Copyright (C) 2013 Texas Instruments Incorporated + * + * Hwmod present only in AM43x and those that differ other than register + * offsets as compared to AM335x. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/platform_data/gpio-omap.h> +#include <linux/platform_data/spi-omap2-mcspi.h> +#include "omap_hwmod.h" +#include "omap_hwmod_33xx_43xx_common_data.h" +#include "prcm43xx.h" + +/* IP blocks */ +static struct omap_hwmod am43xx_l4_hs_hwmod = { + .name = "l4_hs", + .class = &am33xx_l4_hwmod_class, + .clkdm_name = "l3_clkdm", + .flags = HWMOD_INIT_NO_IDLE, + .main_clk = "l4hs_gclk", + .prcm = { + .omap4 = { + .clkctrl_offs = AM43XX_CM_PER_L4HS_CLKCTRL_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +static struct omap_hwmod_rst_info am33xx_wkup_m3_resets[] = { + { .name = "wkup_m3", .rst_shift = 3, .st_shift = 5 }, +}; + +static struct omap_hwmod am43xx_wkup_m3_hwmod = { + .name = "wkup_m3", + .class = &am33xx_wkup_m3_hwmod_class, + .clkdm_name = "l4_wkup_aon_clkdm", + /* Keep hardreset asserted */ + .flags = HWMOD_INIT_NO_RESET | HWMOD_NO_IDLEST, + .main_clk = "sys_clkin_ck", + .prcm = { + .omap4 = { + .clkctrl_offs = AM43XX_CM_WKUP_WKUP_M3_CLKCTRL_OFFSET, + .rstctrl_offs = AM43XX_RM_WKUP_RSTCTRL_OFFSET, + .rstst_offs = AM43XX_RM_WKUP_RSTST_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .rst_lines = am33xx_wkup_m3_resets, + .rst_lines_cnt = ARRAY_SIZE(am33xx_wkup_m3_resets), +}; + +static struct omap_hwmod am43xx_control_hwmod = { + .name = "control", + .class = &am33xx_control_hwmod_class, + .clkdm_name = "l4_wkup_clkdm", + .flags = HWMOD_INIT_NO_IDLE, + .main_clk = "sys_clkin_ck", + .prcm = { + .omap4 = { + .clkctrl_offs = AM43XX_CM_WKUP_CONTROL_CLKCTRL_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +static struct omap_hwmod_opt_clk gpio0_opt_clks[] = { + { .role = "dbclk", .clk = "gpio0_dbclk" }, +}; + +static struct omap_hwmod am43xx_gpio0_hwmod = { + .name = "gpio1", + .class = &am33xx_gpio_hwmod_class, + .clkdm_name = "l4_wkup_clkdm", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, + .main_clk = "sys_clkin_ck", + .prcm = { + .omap4 = { + .clkctrl_offs = AM43XX_CM_WKUP_GPIO0_CLKCTRL_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .opt_clks = gpio0_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(gpio0_opt_clks), + .dev_attr = &gpio_dev_attr, +}; + +static struct omap_hwmod_class_sysconfig am43xx_synctimer_sysc = { + .rev_offs = 0x0, + .sysc_offs = 0x4, + .sysc_flags = SYSC_HAS_SIDLEMODE, + .idlemodes = (SIDLE_FORCE | SIDLE_NO), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class am43xx_synctimer_hwmod_class = { + .name = "synctimer", + .sysc = &am43xx_synctimer_sysc, +}; + +static struct omap_hwmod am43xx_synctimer_hwmod = { + .name = "counter_32k", + .class = &am43xx_synctimer_hwmod_class, + .clkdm_name = "l4_wkup_aon_clkdm", + .flags = HWMOD_SWSUP_SIDLE, + .main_clk = "synctimer_32kclk", + .prcm = { + .omap4 = { + .clkctrl_offs = AM43XX_CM_WKUP_SYNCTIMER_CLKCTRL_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +static struct omap_hwmod am43xx_timer8_hwmod = { + .name = "timer8", + .class = &am33xx_timer_hwmod_class, + .clkdm_name = "l4ls_clkdm", + .main_clk = "timer8_fck", + .prcm = { + .omap4 = { + .clkctrl_offs = AM43XX_CM_PER_TIMER8_CLKCTRL_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +static struct omap_hwmod am43xx_timer9_hwmod = { + .name = "timer9", + .class = &am33xx_timer_hwmod_class, + .clkdm_name = "l4ls_clkdm", + .main_clk = "timer9_fck", + .prcm = { + .omap4 = { + .clkctrl_offs = AM43XX_CM_PER_TIMER9_CLKCTRL_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +static struct omap_hwmod am43xx_timer10_hwmod = { + .name = "timer10", + .class = &am33xx_timer_hwmod_class, + .clkdm_name = "l4ls_clkdm", + .main_clk = "timer10_fck", + .prcm = { + .omap4 = { + .clkctrl_offs = AM43XX_CM_PER_TIMER10_CLKCTRL_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +static struct omap_hwmod am43xx_timer11_hwmod = { + .name = "timer11", + .class = &am33xx_timer_hwmod_class, + .clkdm_name = "l4ls_clkdm", + .main_clk = "timer11_fck", + .prcm = { + .omap4 = { + .clkctrl_offs = AM43XX_CM_PER_TIMER11_CLKCTRL_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +static struct omap_hwmod am43xx_epwmss3_hwmod = { + .name = "epwmss3", + .class = &am33xx_epwmss_hwmod_class, + .clkdm_name = "l4ls_clkdm", + .main_clk = "l4ls_gclk", + .prcm = { + .omap4 = { + .clkctrl_offs = AM43XX_CM_PER_EPWMSS3_CLKCTRL_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +static struct omap_hwmod am43xx_ehrpwm3_hwmod = { + .name = "ehrpwm3", + .class = &am33xx_ehrpwm_hwmod_class, + .clkdm_name = "l4ls_clkdm", + .main_clk = "l4ls_gclk", +}; + +static struct omap_hwmod am43xx_epwmss4_hwmod = { + .name = "epwmss4", + .class = &am33xx_epwmss_hwmod_class, + .clkdm_name = "l4ls_clkdm", + .main_clk = "l4ls_gclk", + .prcm = { + .omap4 = { + .clkctrl_offs = AM43XX_CM_PER_EPWMSS4_CLKCTRL_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +static struct omap_hwmod am43xx_ehrpwm4_hwmod = { + .name = "ehrpwm4", + .class = &am33xx_ehrpwm_hwmod_class, + .clkdm_name = "l4ls_clkdm", + .main_clk = "l4ls_gclk", +}; + +static struct omap_hwmod am43xx_epwmss5_hwmod = { + .name = "epwmss5", + .class = &am33xx_epwmss_hwmod_class, + .clkdm_name = "l4ls_clkdm", + .main_clk = "l4ls_gclk", + .prcm = { + .omap4 = { + .clkctrl_offs = AM43XX_CM_PER_EPWMSS5_CLKCTRL_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +static struct omap_hwmod am43xx_ehrpwm5_hwmod = { + .name = "ehrpwm5", + .class = &am33xx_ehrpwm_hwmod_class, + .clkdm_name = "l4ls_clkdm", + .main_clk = "l4ls_gclk", +}; + +static struct omap_hwmod am43xx_spi2_hwmod = { + .name = "spi2", + .class = &am33xx_spi_hwmod_class, + .clkdm_name = "l4ls_clkdm", + .main_clk = "dpll_per_m2_div4_ck", + .prcm = { + .omap4 = { + .clkctrl_offs = AM43XX_CM_PER_SPI2_CLKCTRL_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .dev_attr = &mcspi_attrib, +}; + +static struct omap_hwmod am43xx_spi3_hwmod = { + .name = "spi3", + .class = &am33xx_spi_hwmod_class, + .clkdm_name = "l4ls_clkdm", + .main_clk = "dpll_per_m2_div4_ck", + .prcm = { + .omap4 = { + .clkctrl_offs = AM43XX_CM_PER_SPI3_CLKCTRL_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .dev_attr = &mcspi_attrib, +}; + +static struct omap_hwmod am43xx_spi4_hwmod = { + .name = "spi4", + .class = &am33xx_spi_hwmod_class, + .clkdm_name = "l4ls_clkdm", + .main_clk = "dpll_per_m2_div4_ck", + .prcm = { + .omap4 = { + .clkctrl_offs = AM43XX_CM_PER_SPI4_CLKCTRL_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .dev_attr = &mcspi_attrib, +}; + +static struct omap_hwmod_opt_clk gpio4_opt_clks[] = { + { .role = "dbclk", .clk = "gpio4_dbclk" }, +}; + +static struct omap_hwmod am43xx_gpio4_hwmod = { + .name = "gpio5", + .class = &am33xx_gpio_hwmod_class, + .clkdm_name = "l4ls_clkdm", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, + .main_clk = "l4ls_gclk", + .prcm = { + .omap4 = { + .clkctrl_offs = AM43XX_CM_PER_GPIO4_CLKCTRL_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .opt_clks = gpio4_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(gpio4_opt_clks), + .dev_attr = &gpio_dev_attr, +}; + +static struct omap_hwmod_opt_clk gpio5_opt_clks[] = { + { .role = "dbclk", .clk = "gpio5_dbclk" }, +}; + +static struct omap_hwmod am43xx_gpio5_hwmod = { + .name = "gpio6", + .class = &am33xx_gpio_hwmod_class, + .clkdm_name = "l4ls_clkdm", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, + .main_clk = "l4ls_gclk", + .prcm = { + .omap4 = { + .clkctrl_offs = AM43XX_CM_PER_GPIO5_CLKCTRL_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .opt_clks = gpio5_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(gpio5_opt_clks), + .dev_attr = &gpio_dev_attr, +}; + +static struct omap_hwmod_class am43xx_ocp2scp_hwmod_class = { + .name = "ocp2scp", +}; + +static struct omap_hwmod am43xx_ocp2scp0_hwmod = { + .name = "ocp2scp0", + .class = &am43xx_ocp2scp_hwmod_class, + .clkdm_name = "l4ls_clkdm", + .main_clk = "l4ls_gclk", + .prcm = { + .omap4 = { + .clkctrl_offs = AM43XX_CM_PER_USBPHYOCP2SCP0_CLKCTRL_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +static struct omap_hwmod am43xx_ocp2scp1_hwmod = { + .name = "ocp2scp1", + .class = &am43xx_ocp2scp_hwmod_class, + .clkdm_name = "l4ls_clkdm", + .main_clk = "l4ls_gclk", + .prcm = { + .omap4 = { + .clkctrl_offs = AM43XX_CM_PER_USBPHYOCP2SCP1_CLKCTRL_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +static struct omap_hwmod_class_sysconfig am43xx_usb_otg_ss_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .sysc_flags = (SYSC_HAS_DMADISABLE | SYSC_HAS_MIDLEMODE | + SYSC_HAS_SIDLEMODE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + SIDLE_SMART_WKUP | MSTANDBY_FORCE | + MSTANDBY_NO | MSTANDBY_SMART | + MSTANDBY_SMART_WKUP), + .sysc_fields = &omap_hwmod_sysc_type2, +}; + +static struct omap_hwmod_class am43xx_usb_otg_ss_hwmod_class = { + .name = "usb_otg_ss", + .sysc = &am43xx_usb_otg_ss_sysc, +}; + +static struct omap_hwmod am43xx_usb_otg_ss0_hwmod = { + .name = "usb_otg_ss0", + .class = &am43xx_usb_otg_ss_hwmod_class, + .clkdm_name = "l3s_clkdm", + .main_clk = "l3s_gclk", + .prcm = { + .omap4 = { + .clkctrl_offs = AM43XX_CM_PER_USB_OTG_SS0_CLKCTRL_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +static struct omap_hwmod am43xx_usb_otg_ss1_hwmod = { + .name = "usb_otg_ss1", + .class = &am43xx_usb_otg_ss_hwmod_class, + .clkdm_name = "l3s_clkdm", + .main_clk = "l3s_gclk", + .prcm = { + .omap4 = { + .clkctrl_offs = AM43XX_CM_PER_USB_OTG_SS1_CLKCTRL_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +static struct omap_hwmod_class_sysconfig am43xx_qspi_sysc = { + .sysc_offs = 0x0010, + .sysc_flags = SYSC_HAS_SIDLEMODE, + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + SIDLE_SMART_WKUP), + .sysc_fields = &omap_hwmod_sysc_type2, +}; + +static struct omap_hwmod_class am43xx_qspi_hwmod_class = { + .name = "qspi", + .sysc = &am43xx_qspi_sysc, +}; + +static struct omap_hwmod am43xx_qspi_hwmod = { + .name = "qspi", + .class = &am43xx_qspi_hwmod_class, + .clkdm_name = "l3s_clkdm", + .main_clk = "l3s_gclk", + .prcm = { + .omap4 = { + .clkctrl_offs = AM43XX_CM_PER_QSPI_CLKCTRL_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* Interfaces */ +static struct omap_hwmod_ocp_if am43xx_l3_main__l4_hs = { + .master = &am33xx_l3_main_hwmod, + .slave = &am43xx_l4_hs_hwmod, + .clk = "l3s_gclk", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_ocp_if am43xx_wkup_m3__l4_wkup = { + .master = &am43xx_wkup_m3_hwmod, + .slave = &am33xx_l4_wkup_hwmod, + .clk = "sys_clkin_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_ocp_if am43xx_l4_wkup__wkup_m3 = { + .master = &am33xx_l4_wkup_hwmod, + .slave = &am43xx_wkup_m3_hwmod, + .clk = "sys_clkin_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_ocp_if am43xx_l3_main__pruss = { + .master = &am33xx_l3_main_hwmod, + .slave = &am33xx_pruss_hwmod, + .clk = "dpll_core_m4_ck", + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_ocp_if am43xx_l4_wkup__smartreflex0 = { + .master = &am33xx_l4_wkup_hwmod, + .slave = &am33xx_smartreflex0_hwmod, + .clk = "sys_clkin_ck", + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_ocp_if am43xx_l4_wkup__smartreflex1 = { + .master = &am33xx_l4_wkup_hwmod, + .slave = &am33xx_smartreflex1_hwmod, + .clk = "sys_clkin_ck", + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_ocp_if am43xx_l4_wkup__control = { + .master = &am33xx_l4_wkup_hwmod, + .slave = &am43xx_control_hwmod, + .clk = "sys_clkin_ck", + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_ocp_if am43xx_l4_wkup__i2c1 = { + .master = &am33xx_l4_wkup_hwmod, + .slave = &am33xx_i2c1_hwmod, + .clk = "sys_clkin_ck", + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_ocp_if am43xx_l4_wkup__gpio0 = { + .master = &am33xx_l4_wkup_hwmod, + .slave = &am43xx_gpio0_hwmod, + .clk = "sys_clkin_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_ocp_if am43xx_l4_hs__cpgmac0 = { + .master = &am43xx_l4_hs_hwmod, + .slave = &am33xx_cpgmac0_hwmod, + .clk = "cpsw_125mhz_gclk", + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_ocp_if am43xx_l4_wkup__timer1 = { + .master = &am33xx_l4_wkup_hwmod, + .slave = &am33xx_timer1_hwmod, + .clk = "sys_clkin_ck", + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_ocp_if am43xx_l4_wkup__uart1 = { + .master = &am33xx_l4_wkup_hwmod, + .slave = &am33xx_uart1_hwmod, + .clk = "sys_clkin_ck", + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_ocp_if am43xx_l4_wkup__wd_timer1 = { + .master = &am33xx_l4_wkup_hwmod, + .slave = &am33xx_wd_timer1_hwmod, + .clk = "sys_clkin_ck", + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_ocp_if am33xx_l4_wkup__synctimer = { + .master = &am33xx_l4_wkup_hwmod, + .slave = &am43xx_synctimer_hwmod, + .clk = "sys_clkin_ck", + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_ocp_if am43xx_l4_ls__timer8 = { + .master = &am33xx_l4_ls_hwmod, + .slave = &am43xx_timer8_hwmod, + .clk = "l4ls_gclk", + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_ocp_if am43xx_l4_ls__timer9 = { + .master = &am33xx_l4_ls_hwmod, + .slave = &am43xx_timer9_hwmod, + .clk = "l4ls_gclk", + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_ocp_if am43xx_l4_ls__timer10 = { + .master = &am33xx_l4_ls_hwmod, + .slave = &am43xx_timer10_hwmod, + .clk = "l4ls_gclk", + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_ocp_if am43xx_l4_ls__timer11 = { + .master = &am33xx_l4_ls_hwmod, + .slave = &am43xx_timer11_hwmod, + .clk = "l4ls_gclk", + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_ocp_if am43xx_l4_ls__epwmss3 = { + .master = &am33xx_l4_ls_hwmod, + .slave = &am43xx_epwmss3_hwmod, + .clk = "l4ls_gclk", + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_ocp_if am43xx_epwmss3__ehrpwm3 = { + .master = &am43xx_epwmss3_hwmod, + .slave = &am43xx_ehrpwm3_hwmod, + .clk = "l4ls_gclk", + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_ocp_if am43xx_l4_ls__epwmss4 = { + .master = &am33xx_l4_ls_hwmod, + .slave = &am43xx_epwmss4_hwmod, + .clk = "l4ls_gclk", + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_ocp_if am43xx_epwmss4__ehrpwm4 = { + .master = &am43xx_epwmss4_hwmod, + .slave = &am43xx_ehrpwm4_hwmod, + .clk = "l4ls_gclk", + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_ocp_if am43xx_l4_ls__epwmss5 = { + .master = &am33xx_l4_ls_hwmod, + .slave = &am43xx_epwmss5_hwmod, + .clk = "l4ls_gclk", + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_ocp_if am43xx_epwmss5__ehrpwm5 = { + .master = &am43xx_epwmss5_hwmod, + .slave = &am43xx_ehrpwm5_hwmod, + .clk = "l4ls_gclk", + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_ocp_if am43xx_l4_ls__mcspi2 = { + .master = &am33xx_l4_ls_hwmod, + .slave = &am43xx_spi2_hwmod, + .clk = "l4ls_gclk", + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_ocp_if am43xx_l4_ls__mcspi3 = { + .master = &am33xx_l4_ls_hwmod, + .slave = &am43xx_spi3_hwmod, + .clk = "l4ls_gclk", + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_ocp_if am43xx_l4_ls__mcspi4 = { + .master = &am33xx_l4_ls_hwmod, + .slave = &am43xx_spi4_hwmod, + .clk = "l4ls_gclk", + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_ocp_if am43xx_l4_ls__gpio4 = { + .master = &am33xx_l4_ls_hwmod, + .slave = &am43xx_gpio4_hwmod, + .clk = "l4ls_gclk", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_ocp_if am43xx_l4_ls__gpio5 = { + .master = &am33xx_l4_ls_hwmod, + .slave = &am43xx_gpio5_hwmod, + .clk = "l4ls_gclk", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_ocp_if am43xx_l4_ls__ocp2scp0 = { + .master = &am33xx_l4_ls_hwmod, + .slave = &am43xx_ocp2scp0_hwmod, + .clk = "l4ls_gclk", + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_ocp_if am43xx_l4_ls__ocp2scp1 = { + .master = &am33xx_l4_ls_hwmod, + .slave = &am43xx_ocp2scp1_hwmod, + .clk = "l4ls_gclk", + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_ocp_if am43xx_l3_s__usbotgss0 = { + .master = &am33xx_l3_s_hwmod, + .slave = &am43xx_usb_otg_ss0_hwmod, + .clk = "l3s_gclk", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_ocp_if am43xx_l3_s__usbotgss1 = { + .master = &am33xx_l3_s_hwmod, + .slave = &am43xx_usb_otg_ss1_hwmod, + .clk = "l3s_gclk", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_ocp_if am43xx_l3_s__qspi = { + .master = &am33xx_l3_s_hwmod, + .slave = &am43xx_qspi_hwmod, + .clk = "l3s_gclk", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = { + &am33xx_l4_wkup__synctimer, + &am43xx_l4_ls__timer8, + &am43xx_l4_ls__timer9, + &am43xx_l4_ls__timer10, + &am43xx_l4_ls__timer11, + &am43xx_l4_ls__epwmss3, + &am43xx_epwmss3__ehrpwm3, + &am43xx_l4_ls__epwmss4, + &am43xx_epwmss4__ehrpwm4, + &am43xx_l4_ls__epwmss5, + &am43xx_epwmss5__ehrpwm5, + &am43xx_l4_ls__mcspi2, + &am43xx_l4_ls__mcspi3, + &am43xx_l4_ls__mcspi4, + &am43xx_l4_ls__gpio4, + &am43xx_l4_ls__gpio5, + &am43xx_l3_main__pruss, + &am33xx_mpu__l3_main, + &am33xx_mpu__prcm, + &am33xx_l3_s__l4_ls, + &am33xx_l3_s__l4_wkup, + &am43xx_l3_main__l4_hs, + &am33xx_l3_main__l3_s, + &am33xx_l3_main__l3_instr, + &am33xx_l3_main__gfx, + &am33xx_l3_s__l3_main, + &am33xx_pruss__l3_main, + &am43xx_wkup_m3__l4_wkup, + &am33xx_gfx__l3_main, + &am43xx_l4_wkup__wkup_m3, + &am43xx_l4_wkup__control, + &am43xx_l4_wkup__smartreflex0, + &am43xx_l4_wkup__smartreflex1, + &am43xx_l4_wkup__uart1, + &am43xx_l4_wkup__timer1, + &am43xx_l4_wkup__i2c1, + &am43xx_l4_wkup__gpio0, + &am43xx_l4_wkup__wd_timer1, + &am43xx_l3_s__qspi, + &am33xx_l4_per__dcan0, + &am33xx_l4_per__dcan1, + &am33xx_l4_per__gpio1, + &am33xx_l4_per__gpio2, + &am33xx_l4_per__gpio3, + &am33xx_l4_per__i2c2, + &am33xx_l4_per__i2c3, + &am33xx_l4_per__mailbox, + &am33xx_l4_ls__mcasp0, + &am33xx_l4_ls__mcasp1, + &am33xx_l4_ls__mmc0, + &am33xx_l4_ls__mmc1, + &am33xx_l3_s__mmc2, + &am33xx_l4_ls__timer2, + &am33xx_l4_ls__timer3, + &am33xx_l4_ls__timer4, + &am33xx_l4_ls__timer5, + &am33xx_l4_ls__timer6, + &am33xx_l4_ls__timer7, + &am33xx_l3_main__tpcc, + &am33xx_l4_ls__uart2, + &am33xx_l4_ls__uart3, + &am33xx_l4_ls__uart4, + &am33xx_l4_ls__uart5, + &am33xx_l4_ls__uart6, + &am33xx_l4_ls__elm, + &am33xx_l4_ls__epwmss0, + &am33xx_epwmss0__ecap0, + &am33xx_epwmss0__eqep0, + &am33xx_epwmss0__ehrpwm0, + &am33xx_l4_ls__epwmss1, + &am33xx_epwmss1__ecap1, + &am33xx_epwmss1__eqep1, + &am33xx_epwmss1__ehrpwm1, + &am33xx_l4_ls__epwmss2, + &am33xx_epwmss2__ecap2, + &am33xx_epwmss2__eqep2, + &am33xx_epwmss2__ehrpwm2, + &am33xx_l3_s__gpmc, + &am33xx_l4_ls__mcspi0, + &am33xx_l4_ls__mcspi1, + &am33xx_l3_main__tptc0, + &am33xx_l3_main__tptc1, + &am33xx_l3_main__tptc2, + &am33xx_l3_main__ocmc, + &am43xx_l4_hs__cpgmac0, + &am33xx_cpgmac0__mdio, + &am33xx_l3_main__sha0, + &am33xx_l3_main__aes0, + &am43xx_l4_ls__ocp2scp0, + &am43xx_l4_ls__ocp2scp1, + &am43xx_l3_s__usbotgss0, + &am43xx_l3_s__usbotgss1, + NULL, +}; + +int __init am43xx_hwmod_init(void) +{ + omap_hwmod_am43xx_reg(); + omap_hwmod_init(); + return omap_hwmod_register_links(am43xx_hwmod_ocp_ifs); +} diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 9c3b504477d..1e5b12cb824 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -914,7 +914,7 @@ static struct omap_hwmod omap44xx_emif1_hwmod = { .name = "emif1", .class = &omap44xx_emif_hwmod_class, .clkdm_name = "l3_emif_clkdm", - .flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET, + .flags = HWMOD_INIT_NO_IDLE, .main_clk = "ddrphy_ck", .prcm = { .omap4 = { @@ -930,7 +930,7 @@ static struct omap_hwmod omap44xx_emif2_hwmod = { .name = "emif2", .class = &omap44xx_emif_hwmod_class, .clkdm_name = "l3_emif_clkdm", - .flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET, + .flags = HWMOD_INIT_NO_IDLE, .main_clk = "ddrphy_ck", .prcm = { .omap4 = { @@ -2193,7 +2193,7 @@ static struct omap_hwmod omap44xx_mpu_hwmod = { .name = "mpu", .class = &omap44xx_mpu_hwmod_class, .clkdm_name = "mpuss_clkdm", - .flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET, + .flags = HWMOD_INIT_NO_IDLE, .main_clk = "dpll_mpu_m2_ck", .prcm = { .omap4 = { diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c index cde415570e0..9e08d6994a0 100644 --- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c @@ -352,7 +352,7 @@ static struct omap_hwmod omap54xx_emif1_hwmod = { .name = "emif1", .class = &omap54xx_emif_hwmod_class, .clkdm_name = "emif_clkdm", - .flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET, + .flags = HWMOD_INIT_NO_IDLE, .main_clk = "dpll_core_h11x2_ck", .prcm = { .omap4 = { @@ -368,7 +368,7 @@ static struct omap_hwmod omap54xx_emif2_hwmod = { .name = "emif2", .class = &omap54xx_emif_hwmod_class, .clkdm_name = "emif_clkdm", - .flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET, + .flags = HWMOD_INIT_NO_IDLE, .main_clk = "dpll_core_h11x2_ck", .prcm = { .omap4 = { @@ -1135,7 +1135,7 @@ static struct omap_hwmod omap54xx_mpu_hwmod = { .name = "mpu", .class = &omap54xx_mpu_hwmod_class, .clkdm_name = "mpu_clkdm", - .flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET, + .flags = HWMOD_INIT_NO_IDLE, .main_clk = "dpll_mpu_m2_ck", .prcm = { .omap4 = { @@ -1146,6 +1146,77 @@ static struct omap_hwmod omap54xx_mpu_hwmod = { }; /* + * 'spinlock' class + * spinlock provides hardware assistance for synchronizing the processes + * running on multiple processors + */ + +static struct omap_hwmod_class_sysconfig omap54xx_spinlock_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY | + SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap54xx_spinlock_hwmod_class = { + .name = "spinlock", + .sysc = &omap54xx_spinlock_sysc, +}; + +/* spinlock */ +static struct omap_hwmod omap54xx_spinlock_hwmod = { + .name = "spinlock", + .class = &omap54xx_spinlock_hwmod_class, + .clkdm_name = "l4cfg_clkdm", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_L4CFG_SPINLOCK_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_L4CFG_SPINLOCK_CONTEXT_OFFSET, + }, + }, +}; + +/* + * 'ocp2scp' class + * bridge to transform ocp interface protocol to scp (serial control port) + * protocol + */ + +static struct omap_hwmod_class_sysconfig omap54xx_ocp2scp_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap54xx_ocp2scp_hwmod_class = { + .name = "ocp2scp", + .sysc = &omap54xx_ocp2scp_sysc, +}; + +/* ocp2scp1 */ +static struct omap_hwmod omap54xx_ocp2scp1_hwmod = { + .name = "ocp2scp1", + .class = &omap54xx_ocp2scp_hwmod_class, + .clkdm_name = "l3init_clkdm", + .main_clk = "l4_root_clk_div", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_L3INIT_OCP2SCP1_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_L3INIT_OCP2SCP1_CONTEXT_OFFSET, + .modulemode = MODULEMODE_HWCTRL, + }, + }, +}; + +/* * 'timer' class * general purpose timer module with accurate 1ms tick * This class contains several variants: ['timer_1ms', 'timer'] @@ -1465,6 +1536,123 @@ static struct omap_hwmod omap54xx_uart6_hwmod = { }; /* + * 'usb_host_hs' class + * high-speed multi-port usb host controller + */ + +static struct omap_hwmod_class_sysconfig omap54xx_usb_host_hs_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_RESET_STATUS | + SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO | + MSTANDBY_SMART | MSTANDBY_SMART_WKUP), + .sysc_fields = &omap_hwmod_sysc_type2, +}; + +static struct omap_hwmod_class omap54xx_usb_host_hs_hwmod_class = { + .name = "usb_host_hs", + .sysc = &omap54xx_usb_host_hs_sysc, +}; + +static struct omap_hwmod omap54xx_usb_host_hs_hwmod = { + .name = "usb_host_hs", + .class = &omap54xx_usb_host_hs_hwmod_class, + .clkdm_name = "l3init_clkdm", + /* + * Errata: USBHOST Configured In Smart-Idle Can Lead To a Deadlock + * id: i660 + * + * Description: + * In the following configuration : + * - USBHOST module is set to smart-idle mode + * - PRCM asserts idle_req to the USBHOST module ( This typically + * happens when the system is going to a low power mode : all ports + * have been suspended, the master part of the USBHOST module has + * entered the standby state, and SW has cut the functional clocks) + * - an USBHOST interrupt occurs before the module is able to answer + * idle_ack, typically a remote wakeup IRQ. + * Then the USB HOST module will enter a deadlock situation where it + * is no more accessible nor functional. + * + * Workaround: + * Don't use smart idle; use only force idle, hence HWMOD_SWSUP_SIDLE + */ + + /* + * Errata: USB host EHCI may stall when entering smart-standby mode + * Id: i571 + * + * Description: + * When the USBHOST module is set to smart-standby mode, and when it is + * ready to enter the standby state (i.e. all ports are suspended and + * all attached devices are in suspend mode), then it can wrongly assert + * the Mstandby signal too early while there are still some residual OCP + * transactions ongoing. If this condition occurs, the internal state + * machine may go to an undefined state and the USB link may be stuck + * upon the next resume. + * + * Workaround: + * Don't use smart standby; use only force standby, + * hence HWMOD_SWSUP_MSTANDBY + */ + + /* + * During system boot; If the hwmod framework resets the module + * the module will have smart idle settings; which can lead to deadlock + * (above Errata Id:i660); so, dont reset the module during boot; + * Use HWMOD_INIT_NO_RESET. + */ + + .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY | + HWMOD_INIT_NO_RESET, + .main_clk = "l3init_60m_fclk", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_L3INIT_USB_HOST_HS_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_L3INIT_USB_HOST_HS_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* + * 'usb_tll_hs' class + * usb_tll_hs module is the adapter on the usb_host_hs ports + */ + +static struct omap_hwmod_class_sysconfig omap54xx_usb_tll_hs_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY | + SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap54xx_usb_tll_hs_hwmod_class = { + .name = "usb_tll_hs", + .sysc = &omap54xx_usb_tll_hs_sysc, +}; + +static struct omap_hwmod omap54xx_usb_tll_hs_hwmod = { + .name = "usb_tll_hs", + .class = &omap54xx_usb_tll_hs_hwmod_class, + .clkdm_name = "l3init_clkdm", + .main_clk = "l4_root_clk_div", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_L3INIT_USB_TLL_HS_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_L3INIT_USB_TLL_HS_CONTEXT_OFFSET, + .modulemode = MODULEMODE_HWCTRL, + }, + }, +}; + +/* * 'usb_otg_ss' class * 2.0 super speed (usb_otg_ss) controller */ @@ -1960,6 +2148,22 @@ static struct omap_hwmod_ocp_if omap54xx_l4_cfg__mpu = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; +/* l4_cfg -> spinlock */ +static struct omap_hwmod_ocp_if omap54xx_l4_cfg__spinlock = { + .master = &omap54xx_l4_cfg_hwmod, + .slave = &omap54xx_spinlock_hwmod, + .clk = "l4_root_clk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_cfg -> ocp2scp1 */ +static struct omap_hwmod_ocp_if omap54xx_l4_cfg__ocp2scp1 = { + .master = &omap54xx_l4_cfg_hwmod, + .slave = &omap54xx_ocp2scp1_hwmod, + .clk = "l4_root_clk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + /* l4_wkup -> timer1 */ static struct omap_hwmod_ocp_if omap54xx_l4_wkup__timer1 = { .master = &omap54xx_l4_wkup_hwmod, @@ -2096,6 +2300,22 @@ static struct omap_hwmod_ocp_if omap54xx_l4_per__uart6 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; +/* l4_cfg -> usb_host_hs */ +static struct omap_hwmod_ocp_if omap54xx_l4_cfg__usb_host_hs = { + .master = &omap54xx_l4_cfg_hwmod, + .slave = &omap54xx_usb_host_hs_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_cfg -> usb_tll_hs */ +static struct omap_hwmod_ocp_if omap54xx_l4_cfg__usb_tll_hs = { + .master = &omap54xx_l4_cfg_hwmod, + .slave = &omap54xx_usb_tll_hs_hwmod, + .clk = "l4_root_clk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + /* l4_cfg -> usb_otg_ss */ static struct omap_hwmod_ocp_if omap54xx_l4_cfg__usb_otg_ss = { .master = &omap54xx_l4_cfg_hwmod, @@ -2163,6 +2383,8 @@ static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = { &omap54xx_l4_per__mmc4, &omap54xx_l4_per__mmc5, &omap54xx_l4_cfg__mpu, + &omap54xx_l4_cfg__spinlock, + &omap54xx_l4_cfg__ocp2scp1, &omap54xx_l4_wkup__timer1, &omap54xx_l4_per__timer2, &omap54xx_l4_per__timer3, @@ -2180,6 +2402,8 @@ static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = { &omap54xx_l4_per__uart4, &omap54xx_l4_per__uart5, &omap54xx_l4_per__uart6, + &omap54xx_l4_cfg__usb_host_hs, + &omap54xx_l4_cfg__usb_tll_hs, &omap54xx_l4_cfg__usb_otg_ss, &omap54xx_l4_wkup__wd_timer2, NULL, diff --git a/arch/arm/mach-omap2/opp.c b/arch/arm/mach-omap2/opp.c index bd41d59a7ca..82fd8c72f75 100644 --- a/arch/arm/mach-omap2/opp.c +++ b/arch/arm/mach-omap2/opp.c @@ -17,6 +17,7 @@ * GNU General Public License for more details. */ #include <linux/module.h> +#include <linux/of.h> #include <linux/opp.h> #include <linux/cpu.h> @@ -40,6 +41,9 @@ int __init omap_init_opp_table(struct omap_opp_def *opp_def, { int i, r; + if (of_have_populated_dt()) + return -EINVAL; + if (!opp_def || !opp_def_size) { pr_err("%s: invalid params!\n", __func__); return -EINVAL; diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c new file mode 100644 index 00000000000..10c71450cf6 --- /dev/null +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -0,0 +1,174 @@ +/* + * Legacy platform_data quirks + * + * Copyright (C) 2013 Texas Instruments + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/clk.h> +#include <linux/gpio.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/of_platform.h> +#include <linux/wl12xx.h> + +#include <linux/platform_data/pinctrl-single.h> + +#include "common.h" +#include "common-board-devices.h" +#include "dss-common.h" +#include "control.h" + +struct pdata_init { + const char *compatible; + void (*fn)(void); +}; + +/* + * Create alias for USB host PHY clock. + * Remove this when clock phandle can be provided via DT + */ +static void __init __used legacy_init_ehci_clk(char *clkname) +{ + int ret; + + ret = clk_add_alias("main_clk", NULL, clkname, NULL); + if (ret) + pr_err("%s:Failed to add main_clk alias to %s :%d\n", + __func__, clkname, ret); +} + +#if IS_ENABLED(CONFIG_WL12XX) + +static struct wl12xx_platform_data wl12xx __initdata; + +static void __init __used legacy_init_wl12xx(unsigned ref_clock, + unsigned tcxo_clock, + int gpio) +{ + int res; + + wl12xx.board_ref_clock = ref_clock; + wl12xx.board_tcxo_clock = tcxo_clock; + wl12xx.irq = gpio_to_irq(gpio); + + res = wl12xx_set_platform_data(&wl12xx); + if (res) { + pr_err("error setting wl12xx data: %d\n", res); + return; + } +} +#else +static inline void legacy_init_wl12xx(unsigned ref_clock, + unsigned tcxo_clock, + int gpio) +{ +} +#endif + +#ifdef CONFIG_ARCH_OMAP3 +static void __init hsmmc2_internal_input_clk(void) +{ + u32 reg; + + reg = omap_ctrl_readl(OMAP343X_CONTROL_DEVCONF1); + reg |= OMAP2_MMCSDIO2ADPCLKISEL; + omap_ctrl_writel(reg, OMAP343X_CONTROL_DEVCONF1); +} + +static void __init omap3_igep0020_legacy_init(void) +{ + omap3_igep2_display_init_of(); +} + +static void __init omap3_evm_legacy_init(void) +{ + legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 149); +} + +static void __init omap3_zoom_legacy_init(void) +{ + legacy_init_wl12xx(WL12XX_REFCLOCK_26, 0, 162); +} +#endif /* CONFIG_ARCH_OMAP3 */ + +#ifdef CONFIG_ARCH_OMAP4 +static void __init omap4_sdp_legacy_init(void) +{ + omap_4430sdp_display_init_of(); + legacy_init_wl12xx(WL12XX_REFCLOCK_26, + WL12XX_TCXOCLOCK_26, 53); +} + +static void __init omap4_panda_legacy_init(void) +{ + omap4_panda_display_init_of(); + legacy_init_ehci_clk("auxclk3_ck"); + legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 53); +} +#endif + +#ifdef CONFIG_SOC_OMAP5 +static void __init omap5_uevm_legacy_init(void) +{ + legacy_init_ehci_clk("auxclk1_ck"); +} +#endif + +static struct pcs_pdata pcs_pdata; + +void omap_pcs_legacy_init(int irq, void (*rearm)(void)) +{ + pcs_pdata.irq = irq; + pcs_pdata.rearm = rearm; +} + +struct of_dev_auxdata omap_auxdata_lookup[] __initdata = { +#ifdef CONFIG_ARCH_OMAP3 + OF_DEV_AUXDATA("ti,omap3-padconf", 0x48002030, "48002030.pinmux", &pcs_pdata), + OF_DEV_AUXDATA("ti,omap3-padconf", 0x48002a00, "48002a00.pinmux", &pcs_pdata), +#endif +#ifdef CONFIG_ARCH_OMAP4 + OF_DEV_AUXDATA("ti,omap4-padconf", 0x4a100040, "4a100040.pinmux", &pcs_pdata), + OF_DEV_AUXDATA("ti,omap4-padconf", 0x4a31e040, "4a31e040.pinmux", &pcs_pdata), +#endif + { /* sentinel */ }, +}; + +static struct pdata_init pdata_quirks[] __initdata = { +#ifdef CONFIG_ARCH_OMAP3 + { "nokia,omap3-n9", hsmmc2_internal_input_clk, }, + { "nokia,omap3-n950", hsmmc2_internal_input_clk, }, + { "isee,omap3-igep0020", omap3_igep0020_legacy_init, }, + { "ti,omap3-evm-37xx", omap3_evm_legacy_init, }, + { "ti,omap3-zoom3", omap3_zoom_legacy_init, }, +#endif +#ifdef CONFIG_ARCH_OMAP4 + { "ti,omap4-sdp", omap4_sdp_legacy_init, }, + { "ti,omap4-panda", omap4_panda_legacy_init, }, +#endif +#ifdef CONFIG_SOC_OMAP5 + { "ti,omap5-uevm", omap5_uevm_legacy_init, }, +#endif + { /* sentinel */ }, +}; + +void __init pdata_quirks_init(struct of_device_id *omap_dt_match_table) +{ + struct pdata_init *quirks = pdata_quirks; + + omap_sdrc_init(NULL, NULL); + of_platform_populate(NULL, omap_dt_match_table, + omap_auxdata_lookup, NULL); + + while (quirks->compatible) { + if (of_machine_is_compatible(quirks->compatible)) { + if (quirks->fn) + quirks->fn(); + break; + } + quirks++; + } +} diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index e742118fcfd..360b2daf54d 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -266,7 +266,12 @@ static void __init omap4_init_voltages(void) static inline void omap_init_cpufreq(void) { - struct platform_device_info devinfo = { .name = "omap-cpufreq", }; + struct platform_device_info devinfo = { }; + + if (!of_have_populated_dt()) + devinfo.name = "omap-cpufreq"; + else + devinfo.name = "cpufreq-cpu0"; platform_device_register_full(&devinfo); } @@ -300,10 +305,11 @@ int __init omap2_common_pm_late_init(void) /* Smartreflex device init */ omap_devinit_smartreflex(); - /* cpufreq dummy device instantiation */ - omap_init_cpufreq(); } + /* cpufreq dummy device instantiation */ + omap_init_cpufreq(); + #ifdef CONFIG_SUSPEND suspend_set_ops(&omap_pm_ops); #endif diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index ce956b0a7ba..8c0759496c8 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -62,16 +62,6 @@ static struct clockdomain *dsp_clkdm, *mpu_clkdm, *wkup_clkdm, *gfx_clkdm; static struct clk *osc_ck, *emul_ck; -static int omap2_fclks_active(void) -{ - u32 f1, f2; - - f1 = omap2_cm_read_mod_reg(CORE_MOD, CM_FCLKEN1); - f2 = omap2_cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2); - - return (f1 | f2) ? 1 : 0; -} - static int omap2_enter_full_retention(void) { u32 l; @@ -142,17 +132,7 @@ static int sti_console_enabled; static int omap2_allow_mpu_retention(void) { - u32 l; - - /* Check for MMC, UART2, UART1, McSPI2, McSPI1 and DSS1. */ - l = omap2_cm_read_mod_reg(CORE_MOD, CM_FCLKEN1); - if (l & (OMAP2420_EN_MMC_MASK | OMAP24XX_EN_UART2_MASK | - OMAP24XX_EN_UART1_MASK | OMAP24XX_EN_MCSPI2_MASK | - OMAP24XX_EN_MCSPI1_MASK | OMAP24XX_EN_DSS1_MASK)) - return 0; - /* Check for UART3. */ - l = omap2_cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2); - if (l & OMAP24XX_EN_UART3_MASK) + if (!omap2xxx_cm_mpu_retention_allowed()) return 0; if (sti_console_enabled) return 0; @@ -188,7 +168,7 @@ static void omap2_enter_mpu_retention(void) static int omap2_can_sleep(void) { - if (omap2_fclks_active()) + if (omap2xxx_cm_fclks_active()) return 0; if (__clk_is_enabled(osc_ck)) return 0; diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 5a2d8034c8d..93b80e5da8d 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -430,8 +430,7 @@ static void __init omap3_iva_idle(void) OMAP3430_IVA2_MOD, CM_FCLKEN); /* Set IVA2 boot mode to 'idle' */ - omap_ctrl_writel(OMAP3_IVA2_BOOTMOD_IDLE, - OMAP343X_CONTROL_IVA2_BOOTMOD); + omap3_ctrl_set_iva_bootmode_idle(); /* Un-reset IVA2 */ omap2_prm_write_mod_reg(0, OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL); diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h index baf3d8bf6be..da5a59ae77b 100644 --- a/arch/arm/mach-omap2/powerdomain.h +++ b/arch/arm/mach-omap2/powerdomain.h @@ -257,6 +257,7 @@ extern void am33xx_powerdomains_init(void); extern void omap44xx_powerdomains_init(void); extern void omap54xx_powerdomains_init(void); extern void dra7xx_powerdomains_init(void); +void am43xx_powerdomains_init(void); extern struct pwrdm_ops omap2_pwrdm_operations; extern struct pwrdm_ops omap3_pwrdm_operations; diff --git a/arch/arm/mach-omap2/powerdomains43xx_data.c b/arch/arm/mach-omap2/powerdomains43xx_data.c new file mode 100644 index 00000000000..95fee54c38a --- /dev/null +++ b/arch/arm/mach-omap2/powerdomains43xx_data.c @@ -0,0 +1,136 @@ +/* + * AM43xx Power domains framework + * + * Copyright (C) 2013 Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> + +#include "powerdomain.h" + +#include "prcm-common.h" +#include "prcm44xx.h" +#include "prcm43xx.h" + +static struct powerdomain gfx_43xx_pwrdm = { + .name = "gfx_pwrdm", + .voltdm = { .name = "core" }, + .prcm_offs = AM43XX_PRM_GFX_INST, + .prcm_partition = AM43XX_PRM_PARTITION, + .pwrsts = PWRSTS_OFF_ON, + .banks = 1, + .pwrsts_mem_on = { + [0] = PWRSTS_ON, /* gfx_mem */ + }, + .flags = PWRDM_HAS_LOWPOWERSTATECHANGE, +}; + +static struct powerdomain mpu_43xx_pwrdm = { + .name = "mpu_pwrdm", + .voltdm = { .name = "mpu" }, + .prcm_offs = AM43XX_PRM_MPU_INST, + .prcm_partition = AM43XX_PRM_PARTITION, + .pwrsts = PWRSTS_OFF_RET_ON, + .pwrsts_logic_ret = PWRSTS_OFF_RET, + .banks = 3, + .pwrsts_mem_ret = { + [0] = PWRSTS_OFF_RET, /* mpu_l1 */ + [1] = PWRSTS_OFF_RET, /* mpu_l2 */ + [2] = PWRSTS_OFF_RET, /* mpu_ram */ + }, + .pwrsts_mem_on = { + [0] = PWRSTS_ON, /* mpu_l1 */ + [1] = PWRSTS_ON, /* mpu_l2 */ + [2] = PWRSTS_ON, /* mpu_ram */ + }, + .flags = PWRDM_HAS_LOWPOWERSTATECHANGE, +}; + +static struct powerdomain rtc_43xx_pwrdm = { + .name = "rtc_pwrdm", + .voltdm = { .name = "rtc" }, + .prcm_offs = AM43XX_PRM_RTC_INST, + .prcm_partition = AM43XX_PRM_PARTITION, + .pwrsts = PWRSTS_ON, +}; + +static struct powerdomain wkup_43xx_pwrdm = { + .name = "wkup_pwrdm", + .voltdm = { .name = "core" }, + .prcm_offs = AM43XX_PRM_WKUP_INST, + .prcm_partition = AM43XX_PRM_PARTITION, + .pwrsts = PWRSTS_ON, + .banks = 1, + .pwrsts_mem_on = { + [0] = PWRSTS_ON, /* debugss_mem */ + }, +}; + +static struct powerdomain tamper_43xx_pwrdm = { + .name = "tamper_pwrdm", + .voltdm = { .name = "tamper" }, + .prcm_offs = AM43XX_PRM_TAMPER_INST, + .prcm_partition = AM43XX_PRM_PARTITION, + .pwrsts = PWRSTS_ON, +}; + +static struct powerdomain cefuse_43xx_pwrdm = { + .name = "cefuse_pwrdm", + .voltdm = { .name = "core" }, + .prcm_offs = AM43XX_PRM_CEFUSE_INST, + .prcm_partition = AM43XX_PRM_PARTITION, + .pwrsts = PWRSTS_OFF_ON, + .flags = PWRDM_HAS_LOWPOWERSTATECHANGE, +}; + +static struct powerdomain per_43xx_pwrdm = { + .name = "per_pwrdm", + .voltdm = { .name = "core" }, + .prcm_offs = AM43XX_PRM_PER_INST, + .prcm_partition = AM43XX_PRM_PARTITION, + .pwrsts = PWRSTS_OFF_RET_ON, + .pwrsts_logic_ret = PWRSTS_OFF_RET, + .banks = 4, + .pwrsts_mem_ret = { + [0] = PWRSTS_OFF_RET, /* icss_mem */ + [1] = PWRSTS_OFF_RET, /* per_mem */ + [2] = PWRSTS_OFF_RET, /* ram1_mem */ + [3] = PWRSTS_OFF_RET, /* ram2_mem */ + }, + .pwrsts_mem_on = { + [0] = PWRSTS_ON, /* icss_mem */ + [1] = PWRSTS_ON, /* per_mem */ + [2] = PWRSTS_ON, /* ram1_mem */ + [3] = PWRSTS_ON, /* ram2_mem */ + }, + .flags = PWRDM_HAS_LOWPOWERSTATECHANGE, +}; + +static struct powerdomain *powerdomains_am43xx[] __initdata = { + &gfx_43xx_pwrdm, + &mpu_43xx_pwrdm, + &rtc_43xx_pwrdm, + &wkup_43xx_pwrdm, + &tamper_43xx_pwrdm, + &cefuse_43xx_pwrdm, + &per_43xx_pwrdm, + NULL +}; + +static int am43xx_check_vcvp(void) +{ + return 0; +} + +void __init am43xx_powerdomains_init(void) +{ + omap4_pwrdm_operations.pwrdm_has_voltdm = am43xx_check_vcvp; + pwrdm_register_platform_funcs(&omap4_pwrdm_operations); + pwrdm_register_pwrdms(powerdomains_am43xx); + pwrdm_complete_init(); +} diff --git a/arch/arm/mach-omap2/prcm43xx.h b/arch/arm/mach-omap2/prcm43xx.h new file mode 100644 index 00000000000..7785be984ed --- /dev/null +++ b/arch/arm/mach-omap2/prcm43xx.h @@ -0,0 +1,146 @@ +/* + * AM43x PRCM defines + * + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#ifndef __ARCH_ARM_MACH_OMAP2_PRCM_43XX_H +#define __ARCH_ARM_MACH_OMAP2_PRCM_43XX_H + +#define AM43XX_PRM_PARTITION 1 +#define AM43XX_CM_PARTITION 1 + +/* PRM instances */ +#define AM43XX_PRM_OCP_SOCKET_INST 0x0000 +#define AM43XX_PRM_MPU_INST 0x0300 +#define AM43XX_PRM_GFX_INST 0x0400 +#define AM43XX_PRM_RTC_INST 0x0500 +#define AM43XX_PRM_TAMPER_INST 0x0600 +#define AM43XX_PRM_CEFUSE_INST 0x0700 +#define AM43XX_PRM_PER_INST 0x0800 +#define AM43XX_PRM_WKUP_INST 0x2000 +#define AM43XX_PRM_DEVICE_INST 0x4000 + +/* RM RSTCTRL offsets */ +#define AM43XX_RM_PER_RSTCTRL_OFFSET 0x0010 +#define AM43XX_RM_GFX_RSTCTRL_OFFSET 0x0010 +#define AM43XX_RM_WKUP_RSTCTRL_OFFSET 0x0010 + +/* RM RSTST offsets */ +#define AM43XX_RM_GFX_RSTST_OFFSET 0x0014 +#define AM43XX_RM_WKUP_RSTST_OFFSET 0x0014 + +/* CM instances */ +#define AM43XX_CM_WKUP_INST 0x2800 +#define AM43XX_CM_DEVICE_INST 0x4100 +#define AM43XX_CM_DPLL_INST 0x4200 +#define AM43XX_CM_MPU_INST 0x8300 +#define AM43XX_CM_GFX_INST 0x8400 +#define AM43XX_CM_RTC_INST 0x8500 +#define AM43XX_CM_TAMPER_INST 0x8600 +#define AM43XX_CM_CEFUSE_INST 0x8700 +#define AM43XX_CM_PER_INST 0x8800 + +/* CD offsets */ +#define AM43XX_CM_WKUP_L3_AON_CDOFFS 0x0000 +#define AM43XX_CM_WKUP_L3S_TSC_CDOFFS 0x0100 +#define AM43XX_CM_WKUP_L4_WKUP_AON_CDOFFS 0x0200 +#define AM43XX_CM_WKUP_WKUP_CDOFFS 0x0300 +#define AM43XX_CM_MPU_MPU_CDOFFS 0x0000 +#define AM43XX_CM_GFX_GFX_L3_CDOFFS 0x0000 +#define AM43XX_CM_RTC_RTC_CDOFFS 0x0000 +#define AM43XX_CM_TAMPER_TAMPER_CDOFFS 0x0000 +#define AM43XX_CM_CEFUSE_CEFUSE_CDOFFS 0x0000 +#define AM43XX_CM_PER_L3_CDOFFS 0x0000 +#define AM43XX_CM_PER_L3S_CDOFFS 0x0200 +#define AM43XX_CM_PER_ICSS_CDOFFS 0x0300 +#define AM43XX_CM_PER_L4LS_CDOFFS 0x0400 +#define AM43XX_CM_PER_EMIF_CDOFFS 0x0700 +#define AM43XX_CM_PER_DSS_CDOFFS 0x0a00 +#define AM43XX_CM_PER_CPSW_CDOFFS 0x0b00 +#define AM43XX_CM_PER_OCPWP_L3_CDOFFS 0x0c00 + +/* CLK CTRL offsets */ +#define AM43XX_CM_PER_UART1_CLKCTRL_OFFSET 0x0580 +#define AM43XX_CM_PER_UART2_CLKCTRL_OFFSET 0x0588 +#define AM43XX_CM_PER_UART3_CLKCTRL_OFFSET 0x0590 +#define AM43XX_CM_PER_UART4_CLKCTRL_OFFSET 0x0598 +#define AM43XX_CM_PER_UART5_CLKCTRL_OFFSET 0x05a0 +#define AM43XX_CM_PER_DCAN0_CLKCTRL_OFFSET 0x0428 +#define AM43XX_CM_PER_DCAN1_CLKCTRL_OFFSET 0x0430 +#define AM43XX_CM_PER_ELM_CLKCTRL_OFFSET 0x0468 +#define AM43XX_CM_PER_EPWMSS0_CLKCTRL_OFFSET 0x0438 +#define AM43XX_CM_PER_EPWMSS1_CLKCTRL_OFFSET 0x0440 +#define AM43XX_CM_PER_EPWMSS2_CLKCTRL_OFFSET 0x0448 +#define AM43XX_CM_PER_GPIO1_CLKCTRL_OFFSET 0x0478 +#define AM43XX_CM_PER_GPIO2_CLKCTRL_OFFSET 0x0480 +#define AM43XX_CM_PER_GPIO3_CLKCTRL_OFFSET 0x0488 +#define AM43XX_CM_PER_I2C1_CLKCTRL_OFFSET 0x04a8 +#define AM43XX_CM_PER_I2C2_CLKCTRL_OFFSET 0x04b0 +#define AM43XX_CM_PER_MAILBOX0_CLKCTRL_OFFSET 0x04b8 +#define AM43XX_CM_PER_MMC0_CLKCTRL_OFFSET 0x04c0 +#define AM43XX_CM_PER_MMC1_CLKCTRL_OFFSET 0x04c8 +#define AM43XX_CM_PER_SPI0_CLKCTRL_OFFSET 0x0500 +#define AM43XX_CM_PER_SPI1_CLKCTRL_OFFSET 0x0508 +#define AM43XX_CM_PER_SPINLOCK_CLKCTRL_OFFSET 0x0528 +#define AM43XX_CM_PER_TIMER2_CLKCTRL_OFFSET 0x0530 +#define AM43XX_CM_PER_TIMER3_CLKCTRL_OFFSET 0x0538 +#define AM43XX_CM_PER_TIMER4_CLKCTRL_OFFSET 0x0540 +#define AM43XX_CM_PER_TIMER5_CLKCTRL_OFFSET 0x0548 +#define AM43XX_CM_PER_TIMER6_CLKCTRL_OFFSET 0x0550 +#define AM43XX_CM_PER_TIMER7_CLKCTRL_OFFSET 0x0558 +#define AM43XX_CM_WKUP_WKUP_M3_CLKCTRL_OFFSET 0x0228 +#define AM43XX_CM_WKUP_CONTROL_CLKCTRL_OFFSET 0x0360 +#define AM43XX_CM_WKUP_SMARTREFLEX0_CLKCTRL_OFFSET 0x0350 +#define AM43XX_CM_WKUP_SMARTREFLEX1_CLKCTRL_OFFSET 0x0358 +#define AM43XX_CM_WKUP_UART0_CLKCTRL_OFFSET 0x0348 +#define AM43XX_CM_WKUP_TIMER1_CLKCTRL_OFFSET 0x0328 +#define AM43XX_CM_WKUP_I2C0_CLKCTRL_OFFSET 0x0340 +#define AM43XX_CM_WKUP_GPIO0_CLKCTRL_OFFSET 0x0368 +#define AM43XX_CM_WKUP_ADC_TSC_CLKCTRL_OFFSET 0x0120 +#define AM43XX_CM_WKUP_WDT1_CLKCTRL_OFFSET 0x0338 +#define AM43XX_CM_WKUP_L4WKUP_CLKCTRL_OFFSET 0x0220 +#define AM43XX_CM_RTC_RTC_CLKCTRL_OFFSET 0x0020 +#define AM43XX_CM_PER_MMC2_CLKCTRL_OFFSET 0x0248 +#define AM43XX_CM_PER_QSPI_CLKCTRL_OFFSET 0x0258 +#define AM43XX_CM_PER_GPMC_CLKCTRL_OFFSET 0x0220 +#define AM43XX_CM_PER_MCASP0_CLKCTRL_OFFSET 0x0238 +#define AM43XX_CM_PER_MCASP1_CLKCTRL_OFFSET 0x0240 +#define AM43XX_CM_PER_L4LS_CLKCTRL_OFFSET 0x0420 +#define AM43XX_CM_PER_L3_CLKCTRL_OFFSET 0x0020 +#define AM43XX_CM_PER_TPCC_CLKCTRL_OFFSET 0x0078 +#define AM43XX_CM_PER_TPTC0_CLKCTRL_OFFSET 0x0080 +#define AM43XX_CM_PER_TPTC1_CLKCTRL_OFFSET 0x0088 +#define AM43XX_CM_PER_TPTC2_CLKCTRL_OFFSET 0x0090 +#define AM43XX_CM_PER_CPGMAC0_CLKCTRL_OFFSET 0x0b20 +#define AM43XX_CM_PER_PRUSS_CLKCTRL_OFFSET 0x0320 +#define AM43XX_CM_GFX_GFX_CLKCTRL_OFFSET 0x0020 +#define AM43XX_CM_PER_L4HS_CLKCTRL_OFFSET 0x00a0 +#define AM43XX_CM_MPU_MPU_CLKCTRL_OFFSET 0x0020 +#define AM43XX_CM_PER_L3_INSTR_CLKCTRL_OFFSET 0x0040 +#define AM43XX_CM_PER_OCMCRAM_CLKCTRL_OFFSET 0x0050 +#define AM43XX_CM_PER_SHA0_CLKCTRL_OFFSET 0x0058 +#define AM43XX_CM_PER_AES0_CLKCTRL_OFFSET 0x0028 +#define AM43XX_CM_PER_TIMER8_CLKCTRL_OFFSET 0x0560 +#define AM43XX_CM_PER_TIMER9_CLKCTRL_OFFSET 0x0568 +#define AM43XX_CM_PER_TIMER10_CLKCTRL_OFFSET 0x0570 +#define AM43XX_CM_PER_TIMER11_CLKCTRL_OFFSET 0x0578 +#define AM43XX_CM_WKUP_SYNCTIMER_CLKCTRL_OFFSET 0x0230 +#define AM43XX_CM_PER_EPWMSS3_CLKCTRL_OFFSET 0x0450 +#define AM43XX_CM_PER_EPWMSS4_CLKCTRL_OFFSET 0x0458 +#define AM43XX_CM_PER_EPWMSS5_CLKCTRL_OFFSET 0x0460 +#define AM43XX_CM_PER_SPI2_CLKCTRL_OFFSET 0x0510 +#define AM43XX_CM_PER_SPI3_CLKCTRL_OFFSET 0x0518 +#define AM43XX_CM_PER_SPI4_CLKCTRL_OFFSET 0x0520 +#define AM43XX_CM_PER_GPIO4_CLKCTRL_OFFSET 0x0490 +#define AM43XX_CM_PER_GPIO5_CLKCTRL_OFFSET 0x0498 +#define AM43XX_CM_PER_USB_OTG_SS0_CLKCTRL_OFFSET 0x0260 +#define AM43XX_CM_PER_USBPHYOCP2SCP0_CLKCTRL_OFFSET 0x05B8 +#define AM43XX_CM_PER_USB_OTG_SS1_CLKCTRL_OFFSET 0x0268 +#define AM43XX_CM_PER_USBPHYOCP2SCP1_CLKCTRL_OFFSET 0x05C0 + +#endif diff --git a/arch/arm/mach-omap2/prm3xxx.h b/arch/arm/mach-omap2/prm3xxx.h index 277f71794e6..f8eb83323b1 100644 --- a/arch/arm/mach-omap2/prm3xxx.h +++ b/arch/arm/mach-omap2/prm3xxx.h @@ -144,7 +144,13 @@ extern u32 omap3_prm_vcvp_read(u8 offset); extern void omap3_prm_vcvp_write(u32 val, u8 offset); extern u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset); -extern void omap3xxx_prm_reconfigure_io_chain(void); +#ifdef CONFIG_ARCH_OMAP3 +void omap3xxx_prm_reconfigure_io_chain(void); +#else +static inline void omap3xxx_prm_reconfigure_io_chain(void) +{ +} +#endif /* PRM interrupt-related functions */ extern void omap3xxx_prm_read_pending_irqs(unsigned long *events); diff --git a/arch/arm/mach-omap2/prm44xx_54xx.h b/arch/arm/mach-omap2/prm44xx_54xx.h index 7cd22abb8f1..a085d9cc1f5 100644 --- a/arch/arm/mach-omap2/prm44xx_54xx.h +++ b/arch/arm/mach-omap2/prm44xx_54xx.h @@ -42,7 +42,13 @@ extern u32 omap4_prm_vcvp_read(u8 offset); extern void omap4_prm_vcvp_write(u32 val, u8 offset); extern u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset); -extern void omap44xx_prm_reconfigure_io_chain(void); +#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) +void omap44xx_prm_reconfigure_io_chain(void); +#else +static inline void omap44xx_prm_reconfigure_io_chain(void) +{ +} +#endif /* PRM interrupt-related functions */ extern void omap44xx_prm_read_pending_irqs(unsigned long *events); diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c index 228b850e632..a2e1174ad1b 100644 --- a/arch/arm/mach-omap2/prm_common.c +++ b/arch/arm/mach-omap2/prm_common.c @@ -24,6 +24,7 @@ #include <linux/interrupt.h> #include <linux/slab.h> +#include "soc.h" #include "prm2xxx_3xxx.h" #include "prm2xxx.h" #include "prm3xxx.h" @@ -322,6 +323,16 @@ int omap_prcm_register_chain_handler(struct omap_prcm_irq_setup *irq_setup) prcm_irq_chips[i] = gc; } + if (of_have_populated_dt()) { + int irq = omap_prcm_event_to_irq("io"); + if (cpu_is_omap34xx()) + omap_pcs_legacy_init(irq, + omap3xxx_prm_reconfigure_io_chain); + else + omap_pcs_legacy_init(irq, + omap44xx_prm_reconfigure_io_chain); + } + return 0; err: diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h index 4588df1447e..076bd90a6ce 100644 --- a/arch/arm/mach-omap2/soc.h +++ b/arch/arm/mach-omap2/soc.h @@ -455,9 +455,7 @@ IS_OMAP_TYPE(3430, 0x3430) #define OMAP4470_REV_ES1_0 (OMAP447X_CLASS | (0x10 << 8)) #define OMAP54XX_CLASS 0x54000054 -#define OMAP5430_REV_ES1_0 (OMAP54XX_CLASS | (0x30 << 16) | (0x10 << 8)) #define OMAP5430_REV_ES2_0 (OMAP54XX_CLASS | (0x30 << 16) | (0x20 << 8)) -#define OMAP5432_REV_ES1_0 (OMAP54XX_CLASS | (0x32 << 16) | (0x10 << 8)) #define OMAP5432_REV_ES2_0 (OMAP54XX_CLASS | (0x32 << 16) | (0x20 << 8)) void omap2xxx_check_revision(void); diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index ead48fa5715..3ca81e0ada5 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -55,6 +55,7 @@ #include "soc.h" #include "common.h" #include "powerdomain.h" +#include "omap-secure.h" #define REALTIME_COUNTER_BASE 0x48243200 #define INCREMENTER_NUMERATOR_OFFSET 0x10 @@ -66,6 +67,15 @@ static struct omap_dm_timer clkev; static struct clock_event_device clockevent_gpt; +#ifdef CONFIG_SOC_HAS_REALTIME_COUNTER +static unsigned long arch_timer_freq; + +void set_cntfreq(void) +{ + omap_smc1(OMAP5_DRA7_MON_SET_CNTFRQ_INDEX, arch_timer_freq); +} +#endif + static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id) { struct clock_event_device *evt = &clockevent_gpt; @@ -78,7 +88,7 @@ static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id) static struct irqaction omap2_gp_timer_irq = { .name = "gp_timer", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .flags = IRQF_TIMER | IRQF_IRQPOLL, .handler = omap2_gp_timer_interrupt, }; @@ -515,6 +525,10 @@ static void __init realtime_counter_init(void) num = 8; den = 25; break; + case 20000000: + num = 192; + den = 625; + break; case 2600000: num = 384; den = 1625; @@ -542,6 +556,9 @@ static void __init realtime_counter_init(void) reg |= den; __raw_writel(reg, base + INCREMENTER_DENUMERATOR_RELOAD_OFFSET); + arch_timer_freq = (rate / den) * num; + set_cntfreq(); + iounmap(base); } #else diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index c05898fbd63..b0d54dae1bc 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -24,6 +24,7 @@ #include <linux/i2c/twl.h> #include <linux/gpio.h> #include <linux/string.h> +#include <linux/phy/phy.h> #include <linux/regulator/machine.h> #include <linux/regulator/fixed.h> @@ -90,8 +91,18 @@ void __init omap_pmic_late_init(void) } #if defined(CONFIG_ARCH_OMAP3) +struct phy_consumer consumers[] = { + PHY_CONSUMER("musb-hdrc.0", "usb"), +}; + +struct phy_init_data init_data = { + .consumers = consumers, + .num_consumers = ARRAY_SIZE(consumers), +}; + static struct twl4030_usb_data omap3_usb_pdata = { .usb_mode = T2_USB_MODE_ULPI, + .init_data = &init_data, }; static int omap3_batt_table[] = { diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c index e83a6a4b184..10855eb4ccc 100644 --- a/arch/arm/mach-omap2/usb-host.c +++ b/arch/arm/mach-omap2/usb-host.c @@ -435,6 +435,7 @@ int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys) struct platform_device *pdev; char *phy_id; struct platform_device_info pdevinfo; + struct usb_phy_gen_xceiv_platform_data nop_pdata; for (i = 0; i < num_phys; i++) { @@ -455,11 +456,18 @@ int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys) return -ENOMEM; } + /* set platform data */ + memset(&nop_pdata, 0, sizeof(nop_pdata)); + if (gpio_is_valid(phy->vcc_gpio)) + nop_pdata.needs_vcc = true; + nop_pdata.gpio_reset = phy->reset_gpio; + nop_pdata.type = USB_PHY_TYPE_USB2; + /* create a NOP PHY device */ memset(&pdevinfo, 0, sizeof(pdevinfo)); pdevinfo.name = nop_name; pdevinfo.id = phy->port; - pdevinfo.data = phy->platform_data; + pdevinfo.data = &nop_pdata; pdevinfo.size_data = sizeof(struct usb_phy_gen_xceiv_platform_data); scnprintf(phy_id, MAX_STR, "usb_phy_gen_xceiv.%d", @@ -474,14 +482,6 @@ int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys) usb_bind_phy("ehci-omap.0", phy->port - 1, phy_id); - /* Do we need RESET regulator ? */ - if (gpio_is_valid(phy->reset_gpio)) { - scnprintf(rail_name, MAX_STR, - "hsusb%d_reset", phy->port); - usbhs_add_regulator(rail_name, phy_id, "reset", - phy->reset_gpio, 1); - } - /* Do we need VCC regulator ? */ if (gpio_is_valid(phy->vcc_gpio)) { scnprintf(rail_name, MAX_STR, "hsusb%d_vcc", phy->port); diff --git a/arch/arm/mach-omap2/usb.h b/arch/arm/mach-omap2/usb.h index e7261ebcf7b..4ba2ae75989 100644 --- a/arch/arm/mach-omap2/usb.h +++ b/arch/arm/mach-omap2/usb.h @@ -58,7 +58,6 @@ struct usbhs_phy_data { int reset_gpio; int vcc_gpio; bool vcc_polarity; /* 1 active high, 0 active low */ - void *platform_data; }; extern void usb_musb_init(struct omap_musb_board_data *board_data); diff --git a/arch/arm/mach-prima2/common.c b/arch/arm/mach-prima2/common.c index e110b6d4ae8..d49aff74de9 100644 --- a/arch/arm/mach-prima2/common.c +++ b/arch/arm/mach-prima2/common.c @@ -6,7 +6,6 @@ * Licensed under GPLv2 or later. */ -#include <linux/clocksource.h> #include <linux/init.h> #include <linux/kernel.h> #include <asm/sizes.h> @@ -21,13 +20,6 @@ void __init sirfsoc_init_late(void) sirfsoc_pm_init(); } -static __init void sirfsoc_init_time(void) -{ - /* initialize clocking early, we want to set the OS timer */ - sirfsoc_of_clk_init(); - clocksource_of_init(); -} - static __init void sirfsoc_map_io(void) { sirfsoc_map_lluart(); @@ -43,7 +35,6 @@ static const char *atlas6_dt_match[] __initdata = { DT_MACHINE_START(ATLAS6_DT, "Generic ATLAS6 (Flattened Device Tree)") /* Maintainer: Barry Song <baohua.song@csr.com> */ .map_io = sirfsoc_map_io, - .init_time = sirfsoc_init_time, .init_late = sirfsoc_init_late, .dt_compat = atlas6_dt_match, .restart = sirfsoc_restart, @@ -59,7 +50,6 @@ static const char *prima2_dt_match[] __initdata = { DT_MACHINE_START(PRIMA2_DT, "Generic PRIMA2 (Flattened Device Tree)") /* Maintainer: Barry Song <baohua.song@csr.com> */ .map_io = sirfsoc_map_io, - .init_time = sirfsoc_init_time, .dma_zone_size = SZ_256M, .init_late = sirfsoc_init_late, .dt_compat = prima2_dt_match, @@ -77,7 +67,6 @@ DT_MACHINE_START(MARCO_DT, "Generic MARCO (Flattened Device Tree)") /* Maintainer: Barry Song <baohua.song@csr.com> */ .smp = smp_ops(sirfsoc_smp_ops), .map_io = sirfsoc_map_io, - .init_time = sirfsoc_init_time, .init_late = sirfsoc_init_late, .dt_compat = marco_dt_match, .restart = sirfsoc_restart, diff --git a/arch/arm/mach-prima2/common.h b/arch/arm/mach-prima2/common.h index a6304858474..4b768060a85 100644 --- a/arch/arm/mach-prima2/common.h +++ b/arch/arm/mach-prima2/common.h @@ -23,7 +23,6 @@ extern void sirfsoc_secondary_startup(void); extern void sirfsoc_cpu_die(unsigned int cpu); extern void __init sirfsoc_of_irq_init(void); -extern void __init sirfsoc_of_clk_init(void); extern void sirfsoc_restart(enum reboot_mode, const char *); extern asmlinkage void __exception_irq_entry sirfsoc_handle_irq(struct pt_regs *regs); diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig index 25ee12b21f0..cf073dea578 100644 --- a/arch/arm/mach-rockchip/Kconfig +++ b/arch/arm/mach-rockchip/Kconfig @@ -5,12 +5,13 @@ config ARCH_ROCKCHIP select ARCH_REQUIRE_GPIOLIB select ARM_GIC select CACHE_L2X0 - select HAVE_ARM_TWD if LOCAL_TIMERS + select HAVE_ARM_TWD if SMP select HAVE_SMP - select LOCAL_TIMERS if SMP select COMMON_CLK select GENERIC_CLOCKEVENTS select DW_APB_TIMER_OF + select ARM_GLOBAL_TIMER + select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK help Support for Rockchip's Cortex-A9 Single-to-Quad-Core-SoCs containing the RK2928, RK30xx and RK31xx series. diff --git a/arch/arm/mach-rockchip/rockchip.c b/arch/arm/mach-rockchip/rockchip.c index 724d2d81f97..82c0b070971 100644 --- a/arch/arm/mach-rockchip/rockchip.c +++ b/arch/arm/mach-rockchip/rockchip.c @@ -19,18 +19,10 @@ #include <linux/init.h> #include <linux/of_platform.h> #include <linux/irqchip.h> -#include <linux/dw_apb_timer.h> -#include <linux/clk-provider.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/hardware/cache-l2x0.h> -static void __init rockchip_timer_init(void) -{ - of_clk_init(NULL); - clocksource_of_init(); -} - static void __init rockchip_dt_init(void) { l2x0_of_init(0, ~0UL); @@ -47,6 +39,5 @@ static const char * const rockchip_board_dt_compat[] = { DT_MACHINE_START(ROCKCHIP_DT, "Rockchip Cortex-A9 (Device Tree)") .init_machine = rockchip_dt_init, - .init_time = rockchip_timer_init, .dt_compat = rockchip_board_dt_compat, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index dba2173e70f..8f1d327e0cd 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -28,6 +28,7 @@ config CPU_S3C2410 select CPU_ARM920T select CPU_LLSERIAL_S3C2410 select S3C2410_CLOCK + select S3C2410_DMA if S3C24XX_DMA select ARM_S3C2410_CPUFREQ if ARM_S3C24XX_CPUFREQ select S3C2410_PM if PM select SAMSUNG_WDT_RESET @@ -70,6 +71,7 @@ config CPU_S3C2442 select CPU_ARM920T select CPU_LLSERIAL_S3C2440 select S3C2410_CLOCK + select S3C2410_DMA if S3C24XX_DMA select S3C2410_PM if PM help Support for S3C2442 Samsung Mobile CPU based systems. @@ -148,7 +150,6 @@ config S3C2410_DMA_DEBUG config S3C2410_DMA bool depends on S3C24XX_DMA && (CPU_S3C2410 || CPU_S3C2442) - default y if CPU_S3C2410 || CPU_S3C2442 help DMA device selection for S3C2410 and compatible CPUs diff --git a/arch/arm/mach-s3c24xx/clock-s3c2412.c b/arch/arm/mach-s3c24xx/clock-s3c2412.c index d8f253f2b48..11b3b28457b 100644 --- a/arch/arm/mach-s3c24xx/clock-s3c2412.c +++ b/arch/arm/mach-s3c24xx/clock-s3c2412.c @@ -484,22 +484,22 @@ static struct clk init_clocks_disable[] = { static struct clk init_clocks[] = { { - .name = "dma", + .name = "dma.0", .parent = &clk_h, .enable = s3c2412_clkcon_enable, .ctrlbit = S3C2412_CLKCON_DMA0, }, { - .name = "dma", + .name = "dma.1", .parent = &clk_h, .enable = s3c2412_clkcon_enable, .ctrlbit = S3C2412_CLKCON_DMA1, }, { - .name = "dma", + .name = "dma.2", .parent = &clk_h, .enable = s3c2412_clkcon_enable, .ctrlbit = S3C2412_CLKCON_DMA2, }, { - .name = "dma", + .name = "dma.3", .parent = &clk_h, .enable = s3c2412_clkcon_enable, .ctrlbit = S3C2412_CLKCON_DMA3, diff --git a/arch/arm/mach-s3c24xx/common-s3c2443.c b/arch/arm/mach-s3c24xx/common-s3c2443.c index f6b9f2ef01b..65d3eef7309 100644 --- a/arch/arm/mach-s3c24xx/common-s3c2443.c +++ b/arch/arm/mach-s3c24xx/common-s3c2443.c @@ -438,32 +438,32 @@ static struct clk init_clocks_off[] = { static struct clk init_clocks[] = { { - .name = "dma", + .name = "dma.0", .parent = &clk_h, .enable = s3c2443_clkcon_enable_h, .ctrlbit = S3C2443_HCLKCON_DMA0, }, { - .name = "dma", + .name = "dma.1", .parent = &clk_h, .enable = s3c2443_clkcon_enable_h, .ctrlbit = S3C2443_HCLKCON_DMA1, }, { - .name = "dma", + .name = "dma.2", .parent = &clk_h, .enable = s3c2443_clkcon_enable_h, .ctrlbit = S3C2443_HCLKCON_DMA2, }, { - .name = "dma", + .name = "dma.3", .parent = &clk_h, .enable = s3c2443_clkcon_enable_h, .ctrlbit = S3C2443_HCLKCON_DMA3, }, { - .name = "dma", + .name = "dma.4", .parent = &clk_h, .enable = s3c2443_clkcon_enable_h, .ctrlbit = S3C2443_HCLKCON_DMA4, }, { - .name = "dma", + .name = "dma.5", .parent = &clk_h, .enable = s3c2443_clkcon_enable_h, .ctrlbit = S3C2443_HCLKCON_DMA5, diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c index 457261c9843..4adaa4b43ff 100644 --- a/arch/arm/mach-s3c24xx/common.c +++ b/arch/arm/mach-s3c24xx/common.c @@ -31,6 +31,7 @@ #include <linux/platform_device.h> #include <linux/delay.h> #include <linux/io.h> +#include <linux/platform_data/dma-s3c24xx.h> #include <mach/hardware.h> #include <mach/regs-clock.h> @@ -44,6 +45,7 @@ #include <mach/regs-gpio.h> #include <plat/regs-serial.h> +#include <mach/dma.h> #include <plat/cpu.h> #include <plat/devs.h> @@ -329,3 +331,207 @@ void __init_or_cpufreq s3c24xx_setup_clocks(unsigned long fclk, clk_p.rate = pclk; clk_f.rate = fclk; } + +#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \ + defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442) +static struct resource s3c2410_dma_resource[] = { + [0] = DEFINE_RES_MEM(S3C24XX_PA_DMA, S3C24XX_SZ_DMA), + [1] = DEFINE_RES_IRQ(IRQ_DMA0), + [2] = DEFINE_RES_IRQ(IRQ_DMA1), + [3] = DEFINE_RES_IRQ(IRQ_DMA2), + [4] = DEFINE_RES_IRQ(IRQ_DMA3), +}; +#endif + +#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2442) +static struct s3c24xx_dma_channel s3c2410_dma_channels[DMACH_MAX] = { + [DMACH_XD0] = { S3C24XX_DMA_AHB, true, S3C24XX_DMA_CHANREQ(0, 0), }, + [DMACH_XD1] = { S3C24XX_DMA_AHB, true, S3C24XX_DMA_CHANREQ(0, 1), }, + [DMACH_SDI] = { S3C24XX_DMA_APB, false, S3C24XX_DMA_CHANREQ(2, 0) | + S3C24XX_DMA_CHANREQ(2, 2) | + S3C24XX_DMA_CHANREQ(1, 3), + }, + [DMACH_SPI0] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(3, 1), }, + [DMACH_SPI1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(2, 3), }, + [DMACH_UART0] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(1, 0), }, + [DMACH_UART1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(1, 1), }, + [DMACH_UART2] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(0, 3), }, + [DMACH_TIMER] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(3, 0) | + S3C24XX_DMA_CHANREQ(3, 2) | + S3C24XX_DMA_CHANREQ(3, 3), + }, + [DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(2, 1) | + S3C24XX_DMA_CHANREQ(1, 2), + }, + [DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(0, 2), }, + [DMACH_USB_EP1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 0), }, + [DMACH_USB_EP2] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 1), }, + [DMACH_USB_EP3] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 2), }, + [DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 3), }, +}; + +static struct s3c24xx_dma_platdata s3c2410_dma_platdata = { + .num_phy_channels = 4, + .channels = s3c2410_dma_channels, + .num_channels = DMACH_MAX, +}; + +struct platform_device s3c2410_device_dma = { + .name = "s3c2410-dma", + .id = 0, + .num_resources = ARRAY_SIZE(s3c2410_dma_resource), + .resource = s3c2410_dma_resource, + .dev = { + .platform_data = &s3c2410_dma_platdata, + }, +}; +#endif + +#ifdef CONFIG_CPU_S3C2412 +static struct s3c24xx_dma_channel s3c2412_dma_channels[DMACH_MAX] = { + [DMACH_XD0] = { S3C24XX_DMA_AHB, true, 17 }, + [DMACH_XD1] = { S3C24XX_DMA_AHB, true, 18 }, + [DMACH_SDI] = { S3C24XX_DMA_APB, false, 10 }, + [DMACH_SPI0_RX] = { S3C24XX_DMA_APB, true, 1 }, + [DMACH_SPI0_TX] = { S3C24XX_DMA_APB, true, 0 }, + [DMACH_SPI1_RX] = { S3C24XX_DMA_APB, true, 3 }, + [DMACH_SPI1_TX] = { S3C24XX_DMA_APB, true, 2 }, + [DMACH_UART0] = { S3C24XX_DMA_APB, true, 19 }, + [DMACH_UART1] = { S3C24XX_DMA_APB, true, 21 }, + [DMACH_UART2] = { S3C24XX_DMA_APB, true, 23 }, + [DMACH_UART0_SRC2] = { S3C24XX_DMA_APB, true, 20 }, + [DMACH_UART1_SRC2] = { S3C24XX_DMA_APB, true, 22 }, + [DMACH_UART2_SRC2] = { S3C24XX_DMA_APB, true, 24 }, + [DMACH_TIMER] = { S3C24XX_DMA_APB, true, 9 }, + [DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, 5 }, + [DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, 4 }, + [DMACH_USB_EP1] = { S3C24XX_DMA_APB, true, 13 }, + [DMACH_USB_EP2] = { S3C24XX_DMA_APB, true, 14 }, + [DMACH_USB_EP3] = { S3C24XX_DMA_APB, true, 15 }, + [DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, 16 }, +}; + +static struct s3c24xx_dma_platdata s3c2412_dma_platdata = { + .num_phy_channels = 4, + .channels = s3c2412_dma_channels, + .num_channels = DMACH_MAX, +}; + +struct platform_device s3c2412_device_dma = { + .name = "s3c2412-dma", + .id = 0, + .num_resources = ARRAY_SIZE(s3c2410_dma_resource), + .resource = s3c2410_dma_resource, + .dev = { + .platform_data = &s3c2412_dma_platdata, + }, +}; +#endif + +#if defined(CONFIG_CPU_S3C2440) +static struct s3c24xx_dma_channel s3c2440_dma_channels[DMACH_MAX] = { + [DMACH_XD0] = { S3C24XX_DMA_AHB, true, S3C24XX_DMA_CHANREQ(0, 0), }, + [DMACH_XD1] = { S3C24XX_DMA_AHB, true, S3C24XX_DMA_CHANREQ(0, 1), }, + [DMACH_SDI] = { S3C24XX_DMA_APB, false, S3C24XX_DMA_CHANREQ(2, 0) | + S3C24XX_DMA_CHANREQ(6, 1) | + S3C24XX_DMA_CHANREQ(2, 2) | + S3C24XX_DMA_CHANREQ(1, 3), + }, + [DMACH_SPI0] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(3, 1), }, + [DMACH_SPI1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(2, 3), }, + [DMACH_UART0] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(1, 0), }, + [DMACH_UART1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(1, 1), }, + [DMACH_UART2] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(0, 3), }, + [DMACH_TIMER] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(3, 0) | + S3C24XX_DMA_CHANREQ(3, 2) | + S3C24XX_DMA_CHANREQ(3, 3), + }, + [DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(2, 1) | + S3C24XX_DMA_CHANREQ(1, 2), + }, + [DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(5, 0) | + S3C24XX_DMA_CHANREQ(0, 2), + }, + [DMACH_PCM_IN] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(6, 0) | + S3C24XX_DMA_CHANREQ(5, 2), + }, + [DMACH_PCM_OUT] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(5, 1) | + S3C24XX_DMA_CHANREQ(6, 3), + }, + [DMACH_MIC_IN] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(6, 2) | + S3C24XX_DMA_CHANREQ(5, 3), + }, + [DMACH_USB_EP1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 0), }, + [DMACH_USB_EP2] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 1), }, + [DMACH_USB_EP3] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 2), }, + [DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 3), }, +}; + +static struct s3c24xx_dma_platdata s3c2440_dma_platdata = { + .num_phy_channels = 4, + .channels = s3c2440_dma_channels, + .num_channels = DMACH_MAX, +}; + +struct platform_device s3c2440_device_dma = { + .name = "s3c2410-dma", + .id = 0, + .num_resources = ARRAY_SIZE(s3c2410_dma_resource), + .resource = s3c2410_dma_resource, + .dev = { + .platform_data = &s3c2440_dma_platdata, + }, +}; +#endif + +#if defined(CONFIG_CPUS_3C2443) || defined(CONFIG_CPU_S3C2416) +static struct resource s3c2443_dma_resource[] = { + [0] = DEFINE_RES_MEM(S3C24XX_PA_DMA, S3C24XX_SZ_DMA), + [1] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA0), + [2] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA1), + [3] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA2), + [4] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA3), + [5] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA4), + [6] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA5), +}; + +static struct s3c24xx_dma_channel s3c2443_dma_channels[DMACH_MAX] = { + [DMACH_XD0] = { S3C24XX_DMA_AHB, true, 17 }, + [DMACH_XD1] = { S3C24XX_DMA_AHB, true, 18 }, + [DMACH_SDI] = { S3C24XX_DMA_APB, false, 10 }, + [DMACH_SPI0_RX] = { S3C24XX_DMA_APB, true, 1 }, + [DMACH_SPI0_TX] = { S3C24XX_DMA_APB, true, 0 }, + [DMACH_SPI1_RX] = { S3C24XX_DMA_APB, true, 3 }, + [DMACH_SPI1_TX] = { S3C24XX_DMA_APB, true, 2 }, + [DMACH_UART0] = { S3C24XX_DMA_APB, true, 19 }, + [DMACH_UART1] = { S3C24XX_DMA_APB, true, 21 }, + [DMACH_UART2] = { S3C24XX_DMA_APB, true, 23 }, + [DMACH_UART3] = { S3C24XX_DMA_APB, true, 25 }, + [DMACH_UART0_SRC2] = { S3C24XX_DMA_APB, true, 20 }, + [DMACH_UART1_SRC2] = { S3C24XX_DMA_APB, true, 22 }, + [DMACH_UART2_SRC2] = { S3C24XX_DMA_APB, true, 24 }, + [DMACH_UART3_SRC2] = { S3C24XX_DMA_APB, true, 26 }, + [DMACH_TIMER] = { S3C24XX_DMA_APB, true, 9 }, + [DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, 5 }, + [DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, 4 }, + [DMACH_PCM_IN] = { S3C24XX_DMA_APB, true, 28 }, + [DMACH_PCM_OUT] = { S3C24XX_DMA_APB, true, 27 }, + [DMACH_MIC_IN] = { S3C24XX_DMA_APB, true, 29 }, +}; + +static struct s3c24xx_dma_platdata s3c2443_dma_platdata = { + .num_phy_channels = 6, + .channels = s3c2443_dma_channels, + .num_channels = DMACH_MAX, +}; + +struct platform_device s3c2443_device_dma = { + .name = "s3c2443-dma", + .id = 0, + .num_resources = ARRAY_SIZE(s3c2443_dma_resource), + .resource = s3c2443_dma_resource, + .dev = { + .platform_data = &s3c2443_dma_platdata, + }, +}; +#endif diff --git a/arch/arm/mach-s3c24xx/common.h b/arch/arm/mach-s3c24xx/common.h index 84b280654f4..e46c1041721 100644 --- a/arch/arm/mach-s3c24xx/common.h +++ b/arch/arm/mach-s3c24xx/common.h @@ -109,4 +109,9 @@ extern void s3c2443_init_irq(void); extern struct syscore_ops s3c24xx_irq_syscore_ops; +extern struct platform_device s3c2410_device_dma; +extern struct platform_device s3c2412_device_dma; +extern struct platform_device s3c2440_device_dma; +extern struct platform_device s3c2443_device_dma; + #endif /* __ARCH_ARM_MACH_S3C24XX_COMMON_H */ diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c index a45fcd8ccf7..43c23e220f5 100644 --- a/arch/arm/mach-s3c24xx/mach-jive.c +++ b/arch/arm/mach-s3c24xx/mach-jive.c @@ -466,6 +466,7 @@ static struct platform_device *jive_devices[] __initdata = { &jive_device_wm8750, &s3c_device_nand, &s3c_device_usbgadget, + &s3c2412_device_dma, }; static struct s3c2410_udc_mach_info jive_udc_cfg __initdata = { diff --git a/arch/arm/mach-s3c24xx/mach-smdk2413.c b/arch/arm/mach-s3c24xx/mach-smdk2413.c index 8146e920f10..c9d31ef28dd 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2413.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2413.c @@ -89,6 +89,7 @@ static struct platform_device *smdk2413_devices[] __initdata = { &s3c_device_i2c0, &s3c_device_iis, &s3c_device_usbgadget, + &s3c2412_device_dma, }; static void __init smdk2413_fixup(struct tag *tags, char **cmdline, diff --git a/arch/arm/mach-s3c24xx/mach-smdk2416.c b/arch/arm/mach-s3c24xx/mach-smdk2416.c index cb46847c66b..f88e672ad1e 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2416.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2416.c @@ -215,6 +215,7 @@ static struct platform_device *smdk2416_devices[] __initdata = { &s3c_device_hsmmc0, &s3c_device_hsmmc1, &s3c_device_usb_hsudc, + &s3c2443_device_dma, }; static void __init smdk2416_map_io(void) diff --git a/arch/arm/mach-s3c24xx/mach-smdk2443.c b/arch/arm/mach-s3c24xx/mach-smdk2443.c index 9435c3bef18..d9933fcc6cc 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2443.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2443.c @@ -115,6 +115,7 @@ static struct platform_device *smdk2443_devices[] __initdata = { #ifdef CONFIG_SND_SOC_SMDK2443_WM9710 &s3c_device_ac97, #endif + &s3c2443_device_dma, }; static void __init smdk2443_map_io(void) diff --git a/arch/arm/mach-s3c24xx/mach-vstms.c b/arch/arm/mach-s3c24xx/mach-vstms.c index b66588428ec..f7ec9c55078 100644 --- a/arch/arm/mach-s3c24xx/mach-vstms.c +++ b/arch/arm/mach-s3c24xx/mach-vstms.c @@ -126,6 +126,7 @@ static struct platform_device *vstms_devices[] __initdata = { &s3c_device_iis, &s3c_device_rtc, &s3c_device_nand, + &s3c2412_device_dma, }; static void __init vstms_fixup(struct tag *tags, char **cmdline, diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig index 041da517242..2cb8dc55b50 100644 --- a/arch/arm/mach-s3c64xx/Kconfig +++ b/arch/arm/mach-s3c64xx/Kconfig @@ -3,16 +3,7 @@ # # Licensed under GPLv2 -# temporary until we can eliminate all drivers using it. -config PLAT_S3C64XX - bool - depends on ARCH_S3C64XX - default y - select PM_GENERIC_DOMAINS - select SAMSUNG_WAKEMASK - help - Base platform code for any Samsung S3C64XX device - +if ARCH_S3C64XX # Configuration options for the S3C6410 CPU @@ -306,3 +297,21 @@ config MACH_WLF_CRAGG_6410 select SAMSUNG_GPIO_EXTRA128 help Machine support for the Wolfson Cragganmore S3C6410 variant. + +config MACH_S3C64XX_DT + bool "Samsung S3C6400/S3C6410 machine using Device Tree" + select CLKSRC_OF + select CPU_S3C6400 + select CPU_S3C6410 + select PINCTRL + select PINCTRL_S3C64XX + select USE_OF + help + Machine support for Samsung S3C6400/S3C6410 machines with Device Tree + enabled. + Select this if a fdt blob is available for your S3C64XX SoC based + board. + Note: This is under development and not all peripherals can be + supported with this machine file. + +endif diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile index 31d0c910127..6faedcffce0 100644 --- a/arch/arm/mach-s3c64xx/Makefile +++ b/arch/arm/mach-s3c64xx/Makefile @@ -12,7 +12,7 @@ obj- := # Core -obj-y += common.o clock.o +obj-y += common.o # Core support @@ -57,3 +57,4 @@ obj-$(CONFIG_MACH_SMARTQ7) += mach-smartq7.o obj-$(CONFIG_MACH_SMDK6400) += mach-smdk6400.o obj-$(CONFIG_MACH_SMDK6410) += mach-smdk6410.o obj-$(CONFIG_MACH_WLF_CRAGG_6410) += mach-crag6410.o mach-crag6410-module.o +obj-$(CONFIG_MACH_S3C64XX_DT) += mach-s3c64xx-dt.o diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c deleted file mode 100644 index c1bcc4a6d3a..00000000000 --- a/arch/arm/mach-s3c64xx/clock.c +++ /dev/null @@ -1,1007 +0,0 @@ -/* linux/arch/arm/plat-s3c64xx/clock.c - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C64XX Base clock support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <mach/map.h> - -#include <mach/regs-clock.h> - -#include <plat/cpu.h> -#include <plat/devs.h> -#include <plat/cpu-freq.h> -#include <plat/clock.h> -#include <plat/clock-clksrc.h> -#include <plat/pll.h> - -#include "regs-sys.h" - -/* fin_apll, fin_mpll and fin_epll are all the same clock, which we call - * ext_xtal_mux for want of an actual name from the manual. -*/ - -static struct clk clk_ext_xtal_mux = { - .name = "ext_xtal", -}; - -#define clk_fin_apll clk_ext_xtal_mux -#define clk_fin_mpll clk_ext_xtal_mux -#define clk_fin_epll clk_ext_xtal_mux - -#define clk_fout_mpll clk_mpll -#define clk_fout_epll clk_epll - -struct clk clk_h2 = { - .name = "hclk2", - .rate = 0, -}; - -struct clk clk_27m = { - .name = "clk_27m", - .rate = 27000000, -}; - -static int clk_48m_ctrl(struct clk *clk, int enable) -{ - unsigned long flags; - u32 val; - - /* can't rely on clock lock, this register has other usages */ - local_irq_save(flags); - - val = __raw_readl(S3C64XX_OTHERS); - if (enable) - val |= S3C64XX_OTHERS_USBMASK; - else - val &= ~S3C64XX_OTHERS_USBMASK; - - __raw_writel(val, S3C64XX_OTHERS); - local_irq_restore(flags); - - return 0; -} - -struct clk clk_48m = { - .name = "clk_48m", - .rate = 48000000, - .enable = clk_48m_ctrl, -}; - -struct clk clk_xusbxti = { - .name = "xusbxti", - .rate = 48000000, -}; - -static int inline s3c64xx_gate(void __iomem *reg, - struct clk *clk, - int enable) -{ - unsigned int ctrlbit = clk->ctrlbit; - u32 con; - - con = __raw_readl(reg); - - if (enable) - con |= ctrlbit; - else - con &= ~ctrlbit; - - __raw_writel(con, reg); - return 0; -} - -static int s3c64xx_pclk_ctrl(struct clk *clk, int enable) -{ - return s3c64xx_gate(S3C_PCLK_GATE, clk, enable); -} - -static int s3c64xx_hclk_ctrl(struct clk *clk, int enable) -{ - return s3c64xx_gate(S3C_HCLK_GATE, clk, enable); -} - -int s3c64xx_sclk_ctrl(struct clk *clk, int enable) -{ - return s3c64xx_gate(S3C_SCLK_GATE, clk, enable); -} - -static struct clk init_clocks_off[] = { - { - .name = "nand", - .parent = &clk_h, - }, { - .name = "rtc", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_RTC, - }, { - .name = "adc", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_TSADC, - }, { - .name = "i2c", - .devname = "s3c2440-i2c.0", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_IIC, - }, { - .name = "i2c", - .devname = "s3c2440-i2c.1", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C6410_CLKCON_PCLK_I2C1, - }, { - .name = "keypad", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_KEYPAD, - }, { - .name = "spi", - .devname = "s3c6410-spi.0", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_SPI0, - }, { - .name = "spi", - .devname = "s3c6410-spi.1", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_SPI1, - }, { - .name = "48m", - .devname = "s3c-sdhci.0", - .parent = &clk_48m, - .enable = s3c64xx_sclk_ctrl, - .ctrlbit = S3C_CLKCON_SCLK_MMC0_48, - }, { - .name = "48m", - .devname = "s3c-sdhci.1", - .parent = &clk_48m, - .enable = s3c64xx_sclk_ctrl, - .ctrlbit = S3C_CLKCON_SCLK_MMC1_48, - }, { - .name = "48m", - .devname = "s3c-sdhci.2", - .parent = &clk_48m, - .enable = s3c64xx_sclk_ctrl, - .ctrlbit = S3C_CLKCON_SCLK_MMC2_48, - }, { - .name = "ac97", - .parent = &clk_p, - .ctrlbit = S3C_CLKCON_PCLK_AC97, - }, { - .name = "cfcon", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_IHOST, - }, { - .name = "dma0", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_DMA0, - }, { - .name = "dma1", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_DMA1, - }, { - .name = "3dse", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_3DSE, - }, { - .name = "hclk_secur", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_SECUR, - }, { - .name = "sdma1", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_SDMA1, - }, { - .name = "sdma0", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_SDMA0, - }, { - .name = "hclk_jpeg", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_JPEG, - }, { - .name = "camif", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_CAMIF, - }, { - .name = "hclk_scaler", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_SCALER, - }, { - .name = "2d", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_2D, - }, { - .name = "tv", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_TV, - }, { - .name = "post0", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_POST0, - }, { - .name = "rot", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_ROT, - }, { - .name = "hclk_mfc", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_MFC, - }, { - .name = "pclk_mfc", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_MFC, - }, { - .name = "dac27", - .enable = s3c64xx_sclk_ctrl, - .ctrlbit = S3C_CLKCON_SCLK_DAC27, - }, { - .name = "tv27", - .enable = s3c64xx_sclk_ctrl, - .ctrlbit = S3C_CLKCON_SCLK_TV27, - }, { - .name = "scaler27", - .enable = s3c64xx_sclk_ctrl, - .ctrlbit = S3C_CLKCON_SCLK_SCALER27, - }, { - .name = "sclk_scaler", - .enable = s3c64xx_sclk_ctrl, - .ctrlbit = S3C_CLKCON_SCLK_SCALER, - }, { - .name = "post0_27", - .enable = s3c64xx_sclk_ctrl, - .ctrlbit = S3C_CLKCON_SCLK_POST0_27, - }, { - .name = "secur", - .enable = s3c64xx_sclk_ctrl, - .ctrlbit = S3C_CLKCON_SCLK_SECUR, - }, { - .name = "sclk_mfc", - .enable = s3c64xx_sclk_ctrl, - .ctrlbit = S3C_CLKCON_SCLK_MFC, - }, { - .name = "sclk_jpeg", - .enable = s3c64xx_sclk_ctrl, - .ctrlbit = S3C_CLKCON_SCLK_JPEG, - }, -}; - -static struct clk clk_48m_spi0 = { - .name = "spi_48m", - .devname = "s3c6410-spi.0", - .parent = &clk_48m, - .enable = s3c64xx_sclk_ctrl, - .ctrlbit = S3C_CLKCON_SCLK_SPI0_48, -}; - -static struct clk clk_48m_spi1 = { - .name = "spi_48m", - .devname = "s3c6410-spi.1", - .parent = &clk_48m, - .enable = s3c64xx_sclk_ctrl, - .ctrlbit = S3C_CLKCON_SCLK_SPI1_48, -}; - -static struct clk clk_i2s0 = { - .name = "iis", - .devname = "samsung-i2s.0", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_IIS0, -}; - -static struct clk clk_i2s1 = { - .name = "iis", - .devname = "samsung-i2s.1", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_IIS1, -}; - -#ifdef CONFIG_CPU_S3C6410 -static struct clk clk_i2s2 = { - .name = "iis", - .devname = "samsung-i2s.2", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C6410_CLKCON_PCLK_IIS2, -}; -#endif - -static struct clk init_clocks[] = { - { - .name = "lcd", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_LCD, - }, { - .name = "gpio", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_GPIO, - }, { - .name = "usb-host", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_UHOST, - }, { - .name = "otg", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_USB, - }, { - .name = "timers", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_PWM, - }, { - .name = "uart", - .devname = "s3c6400-uart.0", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_UART0, - }, { - .name = "uart", - .devname = "s3c6400-uart.1", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_UART1, - }, { - .name = "uart", - .devname = "s3c6400-uart.2", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_UART2, - }, { - .name = "uart", - .devname = "s3c6400-uart.3", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_UART3, - }, { - .name = "watchdog", - .parent = &clk_p, - .ctrlbit = S3C_CLKCON_PCLK_WDT, - }, -}; - -static struct clk clk_hsmmc0 = { - .name = "hsmmc", - .devname = "s3c-sdhci.0", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_HSMMC0, -}; - -static struct clk clk_hsmmc1 = { - .name = "hsmmc", - .devname = "s3c-sdhci.1", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_HSMMC1, -}; - -static struct clk clk_hsmmc2 = { - .name = "hsmmc", - .devname = "s3c-sdhci.2", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_HSMMC2, -}; - -static struct clk clk_fout_apll = { - .name = "fout_apll", -}; - -static struct clk *clk_src_apll_list[] = { - [0] = &clk_fin_apll, - [1] = &clk_fout_apll, -}; - -static struct clksrc_sources clk_src_apll = { - .sources = clk_src_apll_list, - .nr_sources = ARRAY_SIZE(clk_src_apll_list), -}; - -static struct clksrc_clk clk_mout_apll = { - .clk = { - .name = "mout_apll", - }, - .reg_src = { .reg = S3C_CLK_SRC, .shift = 0, .size = 1 }, - .sources = &clk_src_apll, -}; - -static struct clk *clk_src_epll_list[] = { - [0] = &clk_fin_epll, - [1] = &clk_fout_epll, -}; - -static struct clksrc_sources clk_src_epll = { - .sources = clk_src_epll_list, - .nr_sources = ARRAY_SIZE(clk_src_epll_list), -}; - -static struct clksrc_clk clk_mout_epll = { - .clk = { - .name = "mout_epll", - }, - .reg_src = { .reg = S3C_CLK_SRC, .shift = 2, .size = 1 }, - .sources = &clk_src_epll, -}; - -static struct clk *clk_src_mpll_list[] = { - [0] = &clk_fin_mpll, - [1] = &clk_fout_mpll, -}; - -static struct clksrc_sources clk_src_mpll = { - .sources = clk_src_mpll_list, - .nr_sources = ARRAY_SIZE(clk_src_mpll_list), -}; - -static struct clksrc_clk clk_mout_mpll = { - .clk = { - .name = "mout_mpll", - }, - .reg_src = { .reg = S3C_CLK_SRC, .shift = 1, .size = 1 }, - .sources = &clk_src_mpll, -}; - -static unsigned int armclk_mask; - -static unsigned long s3c64xx_clk_arm_get_rate(struct clk *clk) -{ - unsigned long rate = clk_get_rate(clk->parent); - u32 clkdiv; - - /* divisor mask starts at bit0, so no need to shift */ - clkdiv = __raw_readl(S3C_CLK_DIV0) & armclk_mask; - - return rate / (clkdiv + 1); -} - -static unsigned long s3c64xx_clk_arm_round_rate(struct clk *clk, - unsigned long rate) -{ - unsigned long parent = clk_get_rate(clk->parent); - u32 div; - - if (parent < rate) - return parent; - - div = (parent / rate) - 1; - if (div > armclk_mask) - div = armclk_mask; - - return parent / (div + 1); -} - -static int s3c64xx_clk_arm_set_rate(struct clk *clk, unsigned long rate) -{ - unsigned long parent = clk_get_rate(clk->parent); - u32 div; - u32 val; - - if (rate < parent / (armclk_mask + 1)) - return -EINVAL; - - rate = clk_round_rate(clk, rate); - div = clk_get_rate(clk->parent) / rate; - - val = __raw_readl(S3C_CLK_DIV0); - val &= ~armclk_mask; - val |= (div - 1); - __raw_writel(val, S3C_CLK_DIV0); - - return 0; - -} - -static struct clk clk_arm = { - .name = "armclk", - .parent = &clk_mout_apll.clk, - .ops = &(struct clk_ops) { - .get_rate = s3c64xx_clk_arm_get_rate, - .set_rate = s3c64xx_clk_arm_set_rate, - .round_rate = s3c64xx_clk_arm_round_rate, - }, -}; - -static unsigned long s3c64xx_clk_doutmpll_get_rate(struct clk *clk) -{ - unsigned long rate = clk_get_rate(clk->parent); - - printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate); - - if (__raw_readl(S3C_CLK_DIV0) & S3C6400_CLKDIV0_MPLL_MASK) - rate /= 2; - - return rate; -} - -static struct clk_ops clk_dout_ops = { - .get_rate = s3c64xx_clk_doutmpll_get_rate, -}; - -static struct clk clk_dout_mpll = { - .name = "dout_mpll", - .parent = &clk_mout_mpll.clk, - .ops = &clk_dout_ops, -}; - -static struct clk *clkset_spi_mmc_list[] = { - &clk_mout_epll.clk, - &clk_dout_mpll, - &clk_fin_epll, - &clk_27m, -}; - -static struct clksrc_sources clkset_spi_mmc = { - .sources = clkset_spi_mmc_list, - .nr_sources = ARRAY_SIZE(clkset_spi_mmc_list), -}; - -static struct clk *clkset_irda_list[] = { - &clk_mout_epll.clk, - &clk_dout_mpll, - NULL, - &clk_27m, -}; - -static struct clksrc_sources clkset_irda = { - .sources = clkset_irda_list, - .nr_sources = ARRAY_SIZE(clkset_irda_list), -}; - -static struct clk *clkset_uart_list[] = { - &clk_mout_epll.clk, - &clk_dout_mpll, - NULL, - NULL -}; - -static struct clksrc_sources clkset_uart = { - .sources = clkset_uart_list, - .nr_sources = ARRAY_SIZE(clkset_uart_list), -}; - -static struct clk *clkset_uhost_list[] = { - &clk_48m, - &clk_mout_epll.clk, - &clk_dout_mpll, - &clk_fin_epll, -}; - -static struct clksrc_sources clkset_uhost = { - .sources = clkset_uhost_list, - .nr_sources = ARRAY_SIZE(clkset_uhost_list), -}; - -/* The peripheral clocks are all controlled via clocksource followed - * by an optional divider and gate stage. We currently roll this into - * one clock which hides the intermediate clock from the mux. - * - * Note, the JPEG clock can only be an even divider... - * - * The scaler and LCD clocks depend on the S3C64XX version, and also - * have a common parent divisor so are not included here. - */ - -/* clocks that feed other parts of the clock source tree */ - -static struct clk clk_iis_cd0 = { - .name = "iis_cdclk0", -}; - -static struct clk clk_iis_cd1 = { - .name = "iis_cdclk1", -}; - -static struct clk clk_iisv4_cd = { - .name = "iis_cdclk_v4", -}; - -static struct clk clk_pcm_cd = { - .name = "pcm_cdclk", -}; - -static struct clk *clkset_audio0_list[] = { - [0] = &clk_mout_epll.clk, - [1] = &clk_dout_mpll, - [2] = &clk_fin_epll, - [3] = &clk_iis_cd0, - [4] = &clk_pcm_cd, -}; - -static struct clksrc_sources clkset_audio0 = { - .sources = clkset_audio0_list, - .nr_sources = ARRAY_SIZE(clkset_audio0_list), -}; - -static struct clk *clkset_audio1_list[] = { - [0] = &clk_mout_epll.clk, - [1] = &clk_dout_mpll, - [2] = &clk_fin_epll, - [3] = &clk_iis_cd1, - [4] = &clk_pcm_cd, -}; - -static struct clksrc_sources clkset_audio1 = { - .sources = clkset_audio1_list, - .nr_sources = ARRAY_SIZE(clkset_audio1_list), -}; - -#ifdef CONFIG_CPU_S3C6410 -static struct clk *clkset_audio2_list[] = { - [0] = &clk_mout_epll.clk, - [1] = &clk_dout_mpll, - [2] = &clk_fin_epll, - [3] = &clk_iisv4_cd, - [4] = &clk_pcm_cd, -}; - -static struct clksrc_sources clkset_audio2 = { - .sources = clkset_audio2_list, - .nr_sources = ARRAY_SIZE(clkset_audio2_list), -}; -#endif - -static struct clksrc_clk clksrcs[] = { - { - .clk = { - .name = "usb-bus-host", - .ctrlbit = S3C_CLKCON_SCLK_UHOST, - .enable = s3c64xx_sclk_ctrl, - }, - .reg_src = { .reg = S3C_CLK_SRC, .shift = 5, .size = 2 }, - .reg_div = { .reg = S3C_CLK_DIV1, .shift = 20, .size = 4 }, - .sources = &clkset_uhost, - }, { - .clk = { - .name = "irda-bus", - .ctrlbit = S3C_CLKCON_SCLK_IRDA, - .enable = s3c64xx_sclk_ctrl, - }, - .reg_src = { .reg = S3C_CLK_SRC, .shift = 24, .size = 2 }, - .reg_div = { .reg = S3C_CLK_DIV2, .shift = 20, .size = 4 }, - .sources = &clkset_irda, - }, { - .clk = { - .name = "camera", - .ctrlbit = S3C_CLKCON_SCLK_CAM, - .enable = s3c64xx_sclk_ctrl, - .parent = &clk_h2, - }, - .reg_div = { .reg = S3C_CLK_DIV0, .shift = 20, .size = 4 }, - }, -}; - -/* Where does UCLK0 come from? */ -static struct clksrc_clk clk_sclk_uclk = { - .clk = { - .name = "uclk1", - .ctrlbit = S3C_CLKCON_SCLK_UART, - .enable = s3c64xx_sclk_ctrl, - }, - .reg_src = { .reg = S3C_CLK_SRC, .shift = 13, .size = 1 }, - .reg_div = { .reg = S3C_CLK_DIV2, .shift = 16, .size = 4 }, - .sources = &clkset_uart, -}; - -static struct clksrc_clk clk_sclk_mmc0 = { - .clk = { - .name = "mmc_bus", - .devname = "s3c-sdhci.0", - .ctrlbit = S3C_CLKCON_SCLK_MMC0, - .enable = s3c64xx_sclk_ctrl, - }, - .reg_src = { .reg = S3C_CLK_SRC, .shift = 18, .size = 2 }, - .reg_div = { .reg = S3C_CLK_DIV1, .shift = 0, .size = 4 }, - .sources = &clkset_spi_mmc, -}; - -static struct clksrc_clk clk_sclk_mmc1 = { - .clk = { - .name = "mmc_bus", - .devname = "s3c-sdhci.1", - .ctrlbit = S3C_CLKCON_SCLK_MMC1, - .enable = s3c64xx_sclk_ctrl, - }, - .reg_src = { .reg = S3C_CLK_SRC, .shift = 20, .size = 2 }, - .reg_div = { .reg = S3C_CLK_DIV1, .shift = 4, .size = 4 }, - .sources = &clkset_spi_mmc, -}; - -static struct clksrc_clk clk_sclk_mmc2 = { - .clk = { - .name = "mmc_bus", - .devname = "s3c-sdhci.2", - .ctrlbit = S3C_CLKCON_SCLK_MMC2, - .enable = s3c64xx_sclk_ctrl, - }, - .reg_src = { .reg = S3C_CLK_SRC, .shift = 22, .size = 2 }, - .reg_div = { .reg = S3C_CLK_DIV1, .shift = 8, .size = 4 }, - .sources = &clkset_spi_mmc, -}; - -static struct clksrc_clk clk_sclk_spi0 = { - .clk = { - .name = "spi-bus", - .devname = "s3c6410-spi.0", - .ctrlbit = S3C_CLKCON_SCLK_SPI0, - .enable = s3c64xx_sclk_ctrl, - }, - .reg_src = { .reg = S3C_CLK_SRC, .shift = 14, .size = 2 }, - .reg_div = { .reg = S3C_CLK_DIV2, .shift = 0, .size = 4 }, - .sources = &clkset_spi_mmc, -}; - -static struct clksrc_clk clk_sclk_spi1 = { - .clk = { - .name = "spi-bus", - .devname = "s3c6410-spi.1", - .ctrlbit = S3C_CLKCON_SCLK_SPI1, - .enable = s3c64xx_sclk_ctrl, - }, - .reg_src = { .reg = S3C_CLK_SRC, .shift = 16, .size = 2 }, - .reg_div = { .reg = S3C_CLK_DIV2, .shift = 4, .size = 4 }, - .sources = &clkset_spi_mmc, -}; - -static struct clksrc_clk clk_audio_bus0 = { - .clk = { - .name = "audio-bus", - .devname = "samsung-i2s.0", - .ctrlbit = S3C_CLKCON_SCLK_AUDIO0, - .enable = s3c64xx_sclk_ctrl, - }, - .reg_src = { .reg = S3C_CLK_SRC, .shift = 7, .size = 3 }, - .reg_div = { .reg = S3C_CLK_DIV2, .shift = 8, .size = 4 }, - .sources = &clkset_audio0, -}; - -static struct clksrc_clk clk_audio_bus1 = { - .clk = { - .name = "audio-bus", - .devname = "samsung-i2s.1", - .ctrlbit = S3C_CLKCON_SCLK_AUDIO1, - .enable = s3c64xx_sclk_ctrl, - }, - .reg_src = { .reg = S3C_CLK_SRC, .shift = 10, .size = 3 }, - .reg_div = { .reg = S3C_CLK_DIV2, .shift = 12, .size = 4 }, - .sources = &clkset_audio1, -}; - -#ifdef CONFIG_CPU_S3C6410 -static struct clksrc_clk clk_audio_bus2 = { - .clk = { - .name = "audio-bus", - .devname = "samsung-i2s.2", - .ctrlbit = S3C6410_CLKCON_SCLK_AUDIO2, - .enable = s3c64xx_sclk_ctrl, - }, - .reg_src = { .reg = S3C6410_CLK_SRC2, .shift = 0, .size = 3 }, - .reg_div = { .reg = S3C_CLK_DIV2, .shift = 24, .size = 4 }, - .sources = &clkset_audio2, -}; -#endif -/* Clock initialisation code */ - -static struct clksrc_clk *init_parents[] = { - &clk_mout_apll, - &clk_mout_epll, - &clk_mout_mpll, -}; - -static struct clksrc_clk *clksrc_cdev[] = { - &clk_sclk_uclk, - &clk_sclk_mmc0, - &clk_sclk_mmc1, - &clk_sclk_mmc2, - &clk_sclk_spi0, - &clk_sclk_spi1, - &clk_audio_bus0, - &clk_audio_bus1, -}; - -static struct clk *clk_cdev[] = { - &clk_hsmmc0, - &clk_hsmmc1, - &clk_hsmmc2, - &clk_48m_spi0, - &clk_48m_spi1, - &clk_i2s0, - &clk_i2s1, -}; - -static struct clk_lookup s3c64xx_clk_lookup[] = { - CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p), - CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uclk.clk), - CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.0", &clk_hsmmc0), - CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &clk_hsmmc1), - CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.0", &clk_hsmmc2), - CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk), - CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk), - CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk), - CLKDEV_INIT(NULL, "spi_busclk0", &clk_p), - CLKDEV_INIT("s3c6410-spi.0", "spi_busclk1", &clk_sclk_spi0.clk), - CLKDEV_INIT("s3c6410-spi.0", "spi_busclk2", &clk_48m_spi0), - CLKDEV_INIT("s3c6410-spi.1", "spi_busclk1", &clk_sclk_spi1.clk), - CLKDEV_INIT("s3c6410-spi.1", "spi_busclk2", &clk_48m_spi1), - CLKDEV_INIT("samsung-i2s.0", "i2s_opclk0", &clk_i2s0), - CLKDEV_INIT("samsung-i2s.0", "i2s_opclk1", &clk_audio_bus0.clk), - CLKDEV_INIT("samsung-i2s.1", "i2s_opclk0", &clk_i2s1), - CLKDEV_INIT("samsung-i2s.1", "i2s_opclk1", &clk_audio_bus1.clk), -#ifdef CONFIG_CPU_S3C6410 - CLKDEV_INIT("samsung-i2s.2", "i2s_opclk0", &clk_i2s2), - CLKDEV_INIT("samsung-i2s.2", "i2s_opclk1", &clk_audio_bus2.clk), -#endif -}; - -#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1) - -void __init_or_cpufreq s3c64xx_setup_clocks(void) -{ - struct clk *xtal_clk; - unsigned long xtal; - unsigned long fclk; - unsigned long hclk; - unsigned long hclk2; - unsigned long pclk; - unsigned long epll; - unsigned long apll; - unsigned long mpll; - unsigned int ptr; - u32 clkdiv0; - - printk(KERN_DEBUG "%s: registering clocks\n", __func__); - - clkdiv0 = __raw_readl(S3C_CLK_DIV0); - printk(KERN_DEBUG "%s: clkdiv0 = %08x\n", __func__, clkdiv0); - - xtal_clk = clk_get(NULL, "xtal"); - BUG_ON(IS_ERR(xtal_clk)); - - xtal = clk_get_rate(xtal_clk); - clk_put(xtal_clk); - - printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal); - - /* For now assume the mux always selects the crystal */ - clk_ext_xtal_mux.parent = xtal_clk; - - epll = s3c_get_pll6553x(xtal, __raw_readl(S3C_EPLL_CON0), - __raw_readl(S3C_EPLL_CON1)); - mpll = s3c6400_get_pll(xtal, __raw_readl(S3C_MPLL_CON)); - apll = s3c6400_get_pll(xtal, __raw_readl(S3C_APLL_CON)); - - fclk = mpll; - - printk(KERN_INFO "S3C64XX: PLL settings, A=%ld, M=%ld, E=%ld\n", - apll, mpll, epll); - - if(__raw_readl(S3C64XX_OTHERS) & S3C64XX_OTHERS_SYNCMUXSEL) - /* Synchronous mode */ - hclk2 = apll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2); - else - /* Asynchronous mode */ - hclk2 = mpll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2); - - hclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK); - pclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_PCLK); - - printk(KERN_INFO "S3C64XX: HCLK2=%ld, HCLK=%ld, PCLK=%ld\n", - hclk2, hclk, pclk); - - clk_fout_mpll.rate = mpll; - clk_fout_epll.rate = epll; - clk_fout_apll.rate = apll; - - clk_h2.rate = hclk2; - clk_h.rate = hclk; - clk_p.rate = pclk; - clk_f.rate = fclk; - - for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++) - s3c_set_clksrc(init_parents[ptr], true); - - for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) - s3c_set_clksrc(&clksrcs[ptr], true); -} - -static struct clk *clks1[] __initdata = { - &clk_ext_xtal_mux, - &clk_iis_cd0, - &clk_iis_cd1, - &clk_iisv4_cd, - &clk_pcm_cd, - &clk_mout_epll.clk, - &clk_mout_mpll.clk, - &clk_dout_mpll, - &clk_arm, -}; - -static struct clk *clks[] __initdata = { - &clk_ext, - &clk_epll, - &clk_27m, - &clk_48m, - &clk_h2, - &clk_xusbxti, -}; - -/** - * s3c64xx_register_clocks - register clocks for s3c6400 and s3c6410 - * @xtal: The rate for the clock crystal feeding the PLLs. - * @armclk_divlimit: Divisor mask for ARMCLK. - * - * Register the clocks for the S3C6400 and S3C6410 SoC range, such - * as ARMCLK as well as the necessary parent clocks. - * - * This call does not setup the clocks, which is left to the - * s3c64xx_setup_clocks() call which may be needed by the cpufreq - * or resume code to re-set the clocks if the bootloader has changed - * them. - */ -void __init s3c64xx_register_clocks(unsigned long xtal, - unsigned armclk_divlimit) -{ - unsigned int cnt; - - armclk_mask = armclk_divlimit; - - s3c24xx_register_baseclocks(xtal); - s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); - - s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); - - s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - - s3c24xx_register_clocks(clk_cdev, ARRAY_SIZE(clk_cdev)); - for (cnt = 0; cnt < ARRAY_SIZE(clk_cdev); cnt++) - s3c_disable_clocks(clk_cdev[cnt], 1); - - s3c24xx_register_clocks(clks1, ARRAY_SIZE(clks1)); - s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); - for (cnt = 0; cnt < ARRAY_SIZE(clksrc_cdev); cnt++) - s3c_register_clksrc(clksrc_cdev[cnt], 1); - clkdev_add_table(s3c64xx_clk_lookup, ARRAY_SIZE(s3c64xx_clk_lookup)); -} diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c64xx/common.c index 73d79cf5e14..7a3ce4c39e5 100644 --- a/arch/arm/mach-s3c64xx/common.c +++ b/arch/arm/mach-s3c64xx/common.c @@ -14,9 +14,14 @@ * published by the Free Software Foundation. */ +/* + * NOTE: Code in this file is not used when booting with Device Tree support. + */ + #include <linux/kernel.h> #include <linux/init.h> #include <linux/module.h> +#include <linux/clk-provider.h> #include <linux/interrupt.h> #include <linux/ioport.h> #include <linux/serial_core.h> @@ -38,7 +43,6 @@ #include <mach/regs-gpio.h> #include <plat/cpu.h> -#include <plat/clock.h> #include <plat/devs.h> #include <plat/pm.h> #include <plat/gpio-cfg.h> @@ -50,6 +54,19 @@ #include "common.h" +/* External clock frequency */ +static unsigned long xtal_f = 12000000, xusbxti_f = 48000000; + +void __init s3c64xx_set_xtal_freq(unsigned long freq) +{ + xtal_f = freq; +} + +void __init s3c64xx_set_xusbxti_freq(unsigned long freq) +{ + xusbxti_f = freq; +} + /* uart registration process */ static void __init s3c64xx_init_uarts(struct s3c2410_uartcfg *cfg, int no) @@ -67,7 +84,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = S3C6400_CPU_ID, .idmask = S3C64XX_CPU_MASK, .map_io = s3c6400_map_io, - .init_clocks = s3c6400_init_clocks, .init_uarts = s3c64xx_init_uarts, .init = s3c6400_init, .name = name_s3c6400, @@ -75,7 +91,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = S3C6410_CPU_ID, .idmask = S3C64XX_CPU_MASK, .map_io = s3c6410_map_io, - .init_clocks = s3c6410_init_clocks, .init_uarts = s3c64xx_init_uarts, .init = s3c6410_init, .name = name_s3c6410, @@ -192,6 +207,10 @@ void __init s3c64xx_init_io(struct map_desc *mach_desc, int size) static __init int s3c64xx_dev_init(void) { + /* Not applicable when using DT. */ + if (of_have_populated_dt()) + return 0; + subsys_system_register(&s3c64xx_subsys, NULL); return device_register(&s3c64xx_dev); } @@ -213,8 +232,10 @@ void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid) { /* * FIXME: there is no better place to put this at the moment - * (samsung_wdt_reset_init needs clocks) + * (s3c64xx_clk_init needs ioremap and must happen before init_time + * samsung_wdt_reset_init needs clocks) */ + s3c64xx_clk_init(NULL, xtal_f, xusbxti_f, soc_is_s3c6400(), S3C_VA_SYS); samsung_wdt_reset_init(S3C_VA_WATCHDOG); printk(KERN_DEBUG "%s: initialising interrupts\n", __func__); @@ -391,6 +412,10 @@ static int __init s3c64xx_init_irq_eint(void) { int irq; + /* On DT-enabled systems EINTs are handled by pinctrl-s3c64xx driver. */ + if (of_have_populated_dt()) + return -ENODEV; + for (irq = IRQ_EINT(0); irq <= IRQ_EINT(27); irq++) { irq_set_chip_and_handler(irq, &s3c_irq_eint, handle_level_irq); irq_set_chip_data(irq, (void *)eint_irq_to_bit(irq)); diff --git a/arch/arm/mach-s3c64xx/common.h b/arch/arm/mach-s3c64xx/common.h index e8f990b3766..bd3bd562011 100644 --- a/arch/arm/mach-s3c64xx/common.h +++ b/arch/arm/mach-s3c64xx/common.h @@ -22,21 +22,21 @@ void s3c64xx_init_irq(u32 vic0, u32 vic1); void s3c64xx_init_io(struct map_desc *mach_desc, int size); -void s3c64xx_register_clocks(unsigned long xtal, unsigned armclk_limit); -void s3c64xx_setup_clocks(void); - void s3c64xx_restart(enum reboot_mode mode, const char *cmd); void s3c64xx_init_late(void); +void s3c64xx_clk_init(struct device_node *np, unsigned long xtal_f, + unsigned long xusbxti_f, bool is_s3c6400, void __iomem *reg_base); +void s3c64xx_set_xtal_freq(unsigned long freq); +void s3c64xx_set_xusbxti_freq(unsigned long freq); + #ifdef CONFIG_CPU_S3C6400 extern int s3c6400_init(void); extern void s3c6400_init_irq(void); extern void s3c6400_map_io(void); -extern void s3c6400_init_clocks(int xtal); #else -#define s3c6400_init_clocks NULL #define s3c6400_map_io NULL #define s3c6400_init NULL #endif @@ -46,10 +46,8 @@ extern void s3c6400_init_clocks(int xtal); extern int s3c6410_init(void); extern void s3c6410_init_irq(void); extern void s3c6410_map_io(void); -extern void s3c6410_init_clocks(int xtal); #else -#define s3c6410_init_clocks NULL #define s3c6410_map_io NULL #define s3c6410_init NULL #endif diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c index 759846c28d1..7e22c211381 100644 --- a/arch/arm/mach-s3c64xx/dma.c +++ b/arch/arm/mach-s3c64xx/dma.c @@ -12,6 +12,10 @@ * published by the Free Software Foundation. */ +/* + * NOTE: Code in this file is not used when booting with Device Tree support. + */ + #include <linux/kernel.h> #include <linux/module.h> #include <linux/interrupt.h> @@ -24,6 +28,7 @@ #include <linux/err.h> #include <linux/io.h> #include <linux/amba/pl080.h> +#include <linux/of.h> #include <mach/dma.h> #include <mach/map.h> @@ -677,7 +682,7 @@ static int s3c64xx_dma_init1(int chno, enum dma_ch chbase, goto err_map; } - clk_enable(dmac->clk); + clk_prepare_enable(dmac->clk); dmac->regs = regs; dmac->chanbase = chbase; @@ -711,7 +716,7 @@ static int s3c64xx_dma_init1(int chno, enum dma_ch chbase, return 0; err_clk: - clk_disable(dmac->clk); + clk_disable_unprepare(dmac->clk); clk_put(dmac->clk); err_map: iounmap(regs); @@ -726,6 +731,10 @@ static int __init s3c64xx_dma_init(void) { int ret; + /* This driver is not supported when booting with device tree. */ + if (of_have_populated_dt()) + return -ENODEV; + printk(KERN_INFO "%s: Registering DMA channels\n", __func__); dma_pool = dma_pool_create("DMA-LLI", NULL, sizeof(struct pl080s_lli), 16, 0); diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-clock.h b/arch/arm/mach-s3c64xx/include/mach/regs-clock.h index 05332b998ec..4f44aac7709 100644 --- a/arch/arm/mach-s3c64xx/include/mach/regs-clock.h +++ b/arch/arm/mach-s3c64xx/include/mach/regs-clock.h @@ -15,145 +15,21 @@ #ifndef __PLAT_REGS_CLOCK_H #define __PLAT_REGS_CLOCK_H __FILE__ +/* + * FIXME: Remove remaining definitions + */ + #define S3C_CLKREG(x) (S3C_VA_SYS + (x)) -#define S3C_APLL_LOCK S3C_CLKREG(0x00) -#define S3C_MPLL_LOCK S3C_CLKREG(0x04) -#define S3C_EPLL_LOCK S3C_CLKREG(0x08) -#define S3C_APLL_CON S3C_CLKREG(0x0C) -#define S3C_MPLL_CON S3C_CLKREG(0x10) -#define S3C_EPLL_CON0 S3C_CLKREG(0x14) -#define S3C_EPLL_CON1 S3C_CLKREG(0x18) -#define S3C_CLK_SRC S3C_CLKREG(0x1C) -#define S3C_CLK_DIV0 S3C_CLKREG(0x20) -#define S3C_CLK_DIV1 S3C_CLKREG(0x24) -#define S3C_CLK_DIV2 S3C_CLKREG(0x28) -#define S3C_CLK_OUT S3C_CLKREG(0x2C) -#define S3C_HCLK_GATE S3C_CLKREG(0x30) #define S3C_PCLK_GATE S3C_CLKREG(0x34) -#define S3C_SCLK_GATE S3C_CLKREG(0x38) -#define S3C_MEM0_GATE S3C_CLKREG(0x3C) #define S3C6410_CLK_SRC2 S3C_CLKREG(0x10C) #define S3C_MEM_SYS_CFG S3C_CLKREG(0x120) -/* CLKDIV0 */ -#define S3C6400_CLKDIV0_PCLK_MASK (0xf << 12) -#define S3C6400_CLKDIV0_PCLK_SHIFT (12) -#define S3C6400_CLKDIV0_HCLK2_MASK (0x7 << 9) -#define S3C6400_CLKDIV0_HCLK2_SHIFT (9) -#define S3C6400_CLKDIV0_HCLK_MASK (0x1 << 8) -#define S3C6400_CLKDIV0_HCLK_SHIFT (8) -#define S3C6400_CLKDIV0_MPLL_MASK (0x1 << 4) -#define S3C6400_CLKDIV0_MPLL_SHIFT (4) - -#define S3C6400_CLKDIV0_ARM_MASK (0x7 << 0) -#define S3C6410_CLKDIV0_ARM_MASK (0xf << 0) -#define S3C6400_CLKDIV0_ARM_SHIFT (0) - -/* HCLK GATE Registers */ -#define S3C_CLKCON_HCLK_3DSE (1<<31) -#define S3C_CLKCON_HCLK_UHOST (1<<29) -#define S3C_CLKCON_HCLK_SECUR (1<<28) -#define S3C_CLKCON_HCLK_SDMA1 (1<<27) -#define S3C_CLKCON_HCLK_SDMA0 (1<<26) -#define S3C_CLKCON_HCLK_IROM (1<<25) -#define S3C_CLKCON_HCLK_DDR1 (1<<24) -#define S3C_CLKCON_HCLK_DDR0 (1<<23) -#define S3C_CLKCON_HCLK_MEM1 (1<<22) -#define S3C_CLKCON_HCLK_MEM0 (1<<21) -#define S3C_CLKCON_HCLK_USB (1<<20) -#define S3C_CLKCON_HCLK_HSMMC2 (1<<19) -#define S3C_CLKCON_HCLK_HSMMC1 (1<<18) -#define S3C_CLKCON_HCLK_HSMMC0 (1<<17) -#define S3C_CLKCON_HCLK_MDP (1<<16) -#define S3C_CLKCON_HCLK_DHOST (1<<15) -#define S3C_CLKCON_HCLK_IHOST (1<<14) -#define S3C_CLKCON_HCLK_DMA1 (1<<13) -#define S3C_CLKCON_HCLK_DMA0 (1<<12) -#define S3C_CLKCON_HCLK_JPEG (1<<11) -#define S3C_CLKCON_HCLK_CAMIF (1<<10) -#define S3C_CLKCON_HCLK_SCALER (1<<9) -#define S3C_CLKCON_HCLK_2D (1<<8) -#define S3C_CLKCON_HCLK_TV (1<<7) -#define S3C_CLKCON_HCLK_POST0 (1<<5) -#define S3C_CLKCON_HCLK_ROT (1<<4) -#define S3C_CLKCON_HCLK_LCD (1<<3) -#define S3C_CLKCON_HCLK_TZIC (1<<2) -#define S3C_CLKCON_HCLK_INTC (1<<1) -#define S3C_CLKCON_HCLK_MFC (1<<0) - /* PCLK GATE Registers */ -#define S3C6410_CLKCON_PCLK_I2C1 (1<<27) -#define S3C6410_CLKCON_PCLK_IIS2 (1<<26) -#define S3C_CLKCON_PCLK_SKEY (1<<24) -#define S3C_CLKCON_PCLK_CHIPID (1<<23) -#define S3C_CLKCON_PCLK_SPI1 (1<<22) -#define S3C_CLKCON_PCLK_SPI0 (1<<21) -#define S3C_CLKCON_PCLK_HSIRX (1<<20) -#define S3C_CLKCON_PCLK_HSITX (1<<19) -#define S3C_CLKCON_PCLK_GPIO (1<<18) -#define S3C_CLKCON_PCLK_IIC (1<<17) -#define S3C_CLKCON_PCLK_IIS1 (1<<16) -#define S3C_CLKCON_PCLK_IIS0 (1<<15) -#define S3C_CLKCON_PCLK_AC97 (1<<14) -#define S3C_CLKCON_PCLK_TZPC (1<<13) -#define S3C_CLKCON_PCLK_TSADC (1<<12) -#define S3C_CLKCON_PCLK_KEYPAD (1<<11) -#define S3C_CLKCON_PCLK_IRDA (1<<10) -#define S3C_CLKCON_PCLK_PCM1 (1<<9) -#define S3C_CLKCON_PCLK_PCM0 (1<<8) -#define S3C_CLKCON_PCLK_PWM (1<<7) -#define S3C_CLKCON_PCLK_RTC (1<<6) -#define S3C_CLKCON_PCLK_WDT (1<<5) #define S3C_CLKCON_PCLK_UART3 (1<<4) #define S3C_CLKCON_PCLK_UART2 (1<<3) #define S3C_CLKCON_PCLK_UART1 (1<<2) #define S3C_CLKCON_PCLK_UART0 (1<<1) -#define S3C_CLKCON_PCLK_MFC (1<<0) - -/* SCLK GATE Registers */ -#define S3C_CLKCON_SCLK_UHOST (1<<30) -#define S3C_CLKCON_SCLK_MMC2_48 (1<<29) -#define S3C_CLKCON_SCLK_MMC1_48 (1<<28) -#define S3C_CLKCON_SCLK_MMC0_48 (1<<27) -#define S3C_CLKCON_SCLK_MMC2 (1<<26) -#define S3C_CLKCON_SCLK_MMC1 (1<<25) -#define S3C_CLKCON_SCLK_MMC0 (1<<24) -#define S3C_CLKCON_SCLK_SPI1_48 (1<<23) -#define S3C_CLKCON_SCLK_SPI0_48 (1<<22) -#define S3C_CLKCON_SCLK_SPI1 (1<<21) -#define S3C_CLKCON_SCLK_SPI0 (1<<20) -#define S3C_CLKCON_SCLK_DAC27 (1<<19) -#define S3C_CLKCON_SCLK_TV27 (1<<18) -#define S3C_CLKCON_SCLK_SCALER27 (1<<17) -#define S3C_CLKCON_SCLK_SCALER (1<<16) -#define S3C_CLKCON_SCLK_LCD27 (1<<15) -#define S3C_CLKCON_SCLK_LCD (1<<14) -#define S3C6400_CLKCON_SCLK_POST1_27 (1<<13) -#define S3C6410_CLKCON_FIMC (1<<13) -#define S3C_CLKCON_SCLK_POST0_27 (1<<12) -#define S3C6400_CLKCON_SCLK_POST1 (1<<11) -#define S3C6410_CLKCON_SCLK_AUDIO2 (1<<11) -#define S3C_CLKCON_SCLK_POST0 (1<<10) -#define S3C_CLKCON_SCLK_AUDIO1 (1<<9) -#define S3C_CLKCON_SCLK_AUDIO0 (1<<8) -#define S3C_CLKCON_SCLK_SECUR (1<<7) -#define S3C_CLKCON_SCLK_IRDA (1<<6) -#define S3C_CLKCON_SCLK_UART (1<<5) -#define S3C_CLKCON_SCLK_ONENAND (1<<4) -#define S3C_CLKCON_SCLK_MFC (1<<3) -#define S3C_CLKCON_SCLK_CAM (1<<2) -#define S3C_CLKCON_SCLK_JPEG (1<<1) - -/* CLKSRC */ - -#define S3C6400_CLKSRC_APLL_MOUT (1 << 0) -#define S3C6400_CLKSRC_MPLL_MOUT (1 << 1) -#define S3C6400_CLKSRC_EPLL_MOUT (1 << 2) -#define S3C6400_CLKSRC_APLL_MOUT_SHIFT (0) -#define S3C6400_CLKSRC_MPLL_MOUT_SHIFT (1) -#define S3C6400_CLKSRC_EPLL_MOUT_SHIFT (2) -#define S3C6400_CLKSRC_MFC (1 << 4) /* MEM_SYS_CFG */ #define MEM_SYS_CFG_INDEP_CF 0x4000 diff --git a/arch/arm/mach-s3c64xx/irq-pm.c b/arch/arm/mach-s3c64xx/irq-pm.c index c3da1b68d03..1649c0d1c1b 100644 --- a/arch/arm/mach-s3c64xx/irq-pm.c +++ b/arch/arm/mach-s3c64xx/irq-pm.c @@ -12,12 +12,17 @@ * published by the Free Software Foundation. */ +/* + * NOTE: Code in this file is not used when booting with Device Tree support. + */ + #include <linux/kernel.h> #include <linux/syscore_ops.h> #include <linux/interrupt.h> #include <linux/serial_core.h> #include <linux/irq.h> #include <linux/io.h> +#include <linux/of.h> #include <mach/map.h> @@ -101,6 +106,10 @@ static struct syscore_ops s3c64xx_irq_syscore_ops = { static __init int s3c64xx_syscore_init(void) { + /* Appropriate drivers (pinctrl, uart) handle this when using DT. */ + if (of_have_populated_dt()) + return 0; + register_syscore_ops(&s3c64xx_irq_syscore_ops); return 0; diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c index 35e3f54574e..d266dd5f706 100644 --- a/arch/arm/mach-s3c64xx/mach-anw6410.c +++ b/arch/arm/mach-s3c64xx/mach-anw6410.c @@ -207,7 +207,7 @@ static struct platform_device *anw6410_devices[] __initdata = { static void __init anw6410_map_io(void) { s3c64xx_init_io(anw6410_iodesc, ARRAY_SIZE(anw6410_iodesc)); - s3c24xx_init_clocks(12000000); + s3c64xx_set_xtal_freq(12000000); s3c24xx_init_uarts(anw6410_uartcfgs, ARRAY_SIZE(anw6410_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c index eb8e5a1aca4..1a911df9e45 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -743,7 +743,7 @@ static struct s3c2410_platform_i2c i2c1_pdata = { static void __init crag6410_map_io(void) { s3c64xx_init_io(NULL, 0); - s3c24xx_init_clocks(12000000); + s3c64xx_set_xtal_freq(12000000); s3c24xx_init_uarts(crag6410_uartcfgs, ARRAY_SIZE(crag6410_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c index f39569e0f2e..e8064044ef7 100644 --- a/arch/arm/mach-s3c64xx/mach-hmt.c +++ b/arch/arm/mach-s3c64xx/mach-hmt.c @@ -247,7 +247,7 @@ static struct platform_device *hmt_devices[] __initdata = { static void __init hmt_map_io(void) { s3c64xx_init_io(hmt_iodesc, ARRAY_SIZE(hmt_iodesc)); - s3c24xx_init_clocks(12000000); + s3c64xx_set_xtal_freq(12000000); s3c24xx_init_uarts(hmt_uartcfgs, ARRAY_SIZE(hmt_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c index fc043e3ecdf..58d46a3d7b7 100644 --- a/arch/arm/mach-s3c64xx/mach-mini6410.c +++ b/arch/arm/mach-s3c64xx/mach-mini6410.c @@ -231,7 +231,7 @@ static void __init mini6410_map_io(void) u32 tmp; s3c64xx_init_io(NULL, 0); - s3c24xx_init_clocks(12000000); + s3c64xx_set_xtal_freq(12000000); s3c24xx_init_uarts(mini6410_uartcfgs, ARRAY_SIZE(mini6410_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c index 7e2c3908f1f..2067b0bf55b 100644 --- a/arch/arm/mach-s3c64xx/mach-ncp.c +++ b/arch/arm/mach-s3c64xx/mach-ncp.c @@ -86,7 +86,7 @@ static struct map_desc ncp_iodesc[] __initdata = {}; static void __init ncp_map_io(void) { s3c64xx_init_io(ncp_iodesc, ARRAY_SIZE(ncp_iodesc)); - s3c24xx_init_clocks(12000000); + s3c64xx_set_xtal_freq(12000000); s3c24xx_init_uarts(ncp_uartcfgs, ARRAY_SIZE(ncp_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } diff --git a/arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c b/arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c new file mode 100644 index 00000000000..7eb9a10fc1a --- /dev/null +++ b/arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c @@ -0,0 +1,85 @@ +/* + * Samsung's S3C64XX flattened device tree enabled machine + * + * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/clk-provider.h> +#include <linux/irqchip.h> +#include <linux/of_platform.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/system_misc.h> + +#include <plat/cpu.h> +#include <plat/watchdog-reset.h> + +#include <mach/map.h> + +#include "common.h" + +/* + * IO mapping for shared system controller IP. + * + * FIXME: Make remaining drivers use dynamic mapping. + */ +static struct map_desc s3c64xx_dt_iodesc[] __initdata = { + { + .virtual = (unsigned long)S3C_VA_SYS, + .pfn = __phys_to_pfn(S3C64XX_PA_SYSCON), + .length = SZ_4K, + .type = MT_DEVICE, + }, +}; + +static void __init s3c64xx_dt_map_io(void) +{ + debug_ll_io_init(); + iotable_init(s3c64xx_dt_iodesc, ARRAY_SIZE(s3c64xx_dt_iodesc)); + + s3c64xx_init_cpu(); + + if (!soc_is_s3c64xx()) + panic("SoC is not S3C64xx!"); +} + +static void __init s3c64xx_dt_init_irq(void) +{ + of_clk_init(NULL); + samsung_wdt_reset_of_init(); + irqchip_init(); +}; + +static void __init s3c64xx_dt_init_machine(void) +{ + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); +} + +static void s3c64xx_dt_restart(enum reboot_mode mode, const char *cmd) +{ + if (mode != REBOOT_SOFT) + samsung_wdt_reset(); + + /* if all else fails, or mode was for soft, jump to 0 */ + soft_restart(0); +} + +static char const *s3c64xx_dt_compat[] __initdata = { + "samsung,s3c6400", + "samsung,s3c6410", + NULL +}; + +DT_MACHINE_START(S3C6400_DT, "Samsung S3C64xx (Flattened Device Tree)") + /* Maintainer: Tomasz Figa <tomasz.figa@gmail.com> */ + .dt_compat = s3c64xx_dt_compat, + .map_io = s3c64xx_dt_map_io, + .init_irq = s3c64xx_dt_init_irq, + .init_machine = s3c64xx_dt_init_machine, + .restart = s3c64xx_dt_restart, +MACHINE_END diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c index 86d980b448f..0f47237be3b 100644 --- a/arch/arm/mach-s3c64xx/mach-smartq.c +++ b/arch/arm/mach-s3c64xx/mach-smartq.c @@ -337,13 +337,6 @@ err: return ret; } -static int __init smartq_usb_otg_init(void) -{ - clk_xusbxti.rate = 12000000; - - return 0; -} - static int __init smartq_wifi_init(void) { int ret; @@ -377,7 +370,8 @@ static struct map_desc smartq_iodesc[] __initdata = {}; void __init smartq_map_io(void) { s3c64xx_init_io(smartq_iodesc, ARRAY_SIZE(smartq_iodesc)); - s3c24xx_init_clocks(12000000); + s3c64xx_set_xtal_freq(12000000); + s3c64xx_set_xusbxti_freq(12000000); s3c24xx_init_uarts(smartq_uartcfgs, ARRAY_SIZE(smartq_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); @@ -399,7 +393,6 @@ void __init smartq_machine_init(void) WARN_ON(smartq_lcd_setup_gpio()); WARN_ON(smartq_power_off_init()); WARN_ON(smartq_usb_host_init()); - WARN_ON(smartq_usb_otg_init()); WARN_ON(smartq_wifi_init()); platform_add_devices(smartq_devices, ARRAY_SIZE(smartq_devices)); diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c index d70c0843aea..27381cfcabb 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6400.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c @@ -65,7 +65,7 @@ static struct map_desc smdk6400_iodesc[] = {}; static void __init smdk6400_map_io(void) { s3c64xx_init_io(smdk6400_iodesc, ARRAY_SIZE(smdk6400_iodesc)); - s3c24xx_init_clocks(12000000); + s3c64xx_set_xtal_freq(12000000); s3c24xx_init_uarts(smdk6400_uartcfgs, ARRAY_SIZE(smdk6400_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c index d90b450c564..2a7b32ca5c9 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6410.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c @@ -634,7 +634,7 @@ static void __init smdk6410_map_io(void) u32 tmp; s3c64xx_init_io(smdk6410_iodesc, ARRAY_SIZE(smdk6410_iodesc)); - s3c24xx_init_clocks(12000000); + s3c64xx_set_xtal_freq(12000000); s3c24xx_init_uarts(smdk6410_uartcfgs, ARRAY_SIZE(smdk6410_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c index 6a1f91fea67..8cdb824a3b4 100644 --- a/arch/arm/mach-s3c64xx/pm.c +++ b/arch/arm/mach-s3c64xx/pm.c @@ -194,29 +194,8 @@ void s3c_pm_debug_smdkled(u32 set, u32 clear) #endif static struct sleep_save core_save[] = { - SAVE_ITEM(S3C_APLL_LOCK), - SAVE_ITEM(S3C_MPLL_LOCK), - SAVE_ITEM(S3C_EPLL_LOCK), - SAVE_ITEM(S3C_CLK_SRC), - SAVE_ITEM(S3C_CLK_DIV0), - SAVE_ITEM(S3C_CLK_DIV1), - SAVE_ITEM(S3C_CLK_DIV2), - SAVE_ITEM(S3C_CLK_OUT), - SAVE_ITEM(S3C_HCLK_GATE), - SAVE_ITEM(S3C_PCLK_GATE), - SAVE_ITEM(S3C_SCLK_GATE), - SAVE_ITEM(S3C_MEM0_GATE), - - SAVE_ITEM(S3C_EPLL_CON1), - SAVE_ITEM(S3C_EPLL_CON0), - SAVE_ITEM(S3C64XX_MEM0DRVCON), SAVE_ITEM(S3C64XX_MEM1DRVCON), - -#ifndef CONFIG_CPU_FREQ - SAVE_ITEM(S3C_APLL_CON), - SAVE_ITEM(S3C_MPLL_CON), -#endif }; static struct sleep_save misc_save[] = { diff --git a/arch/arm/mach-s3c64xx/s3c6400.c b/arch/arm/mach-s3c64xx/s3c6400.c index 4869714c6f1..3db0c98222f 100644 --- a/arch/arm/mach-s3c64xx/s3c6400.c +++ b/arch/arm/mach-s3c64xx/s3c6400.c @@ -9,6 +9,10 @@ * published by the Free Software Foundation. */ +/* + * NOTE: Code in this file is not used when booting with Device Tree support. + */ + #include <linux/kernel.h> #include <linux/types.h> #include <linux/interrupt.h> @@ -20,6 +24,7 @@ #include <linux/device.h> #include <linux/serial_core.h> #include <linux/platform_device.h> +#include <linux/of.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -58,12 +63,6 @@ void __init s3c6400_map_io(void) s3c64xx_onenand1_setname("s3c6400-onenand"); } -void __init s3c6400_init_clocks(int xtal) -{ - s3c64xx_register_clocks(xtal, S3C6400_CLKDIV0_ARM_MASK); - s3c64xx_setup_clocks(); -} - void __init s3c6400_init_irq(void) { /* VIC0 does not have IRQS 5..7, @@ -82,6 +81,10 @@ static struct device s3c6400_dev = { static int __init s3c6400_core_init(void) { + /* Not applicable when using DT. */ + if (of_have_populated_dt()) + return 0; + return subsys_system_register(&s3c6400_subsys, NULL); } diff --git a/arch/arm/mach-s3c64xx/s3c6410.c b/arch/arm/mach-s3c64xx/s3c6410.c index 31c29fdf180..72b2278953a 100644 --- a/arch/arm/mach-s3c64xx/s3c6410.c +++ b/arch/arm/mach-s3c64xx/s3c6410.c @@ -10,6 +10,10 @@ * published by the Free Software Foundation. */ +/* + * NOTE: Code in this file is not used when booting with Device Tree support. + */ + #include <linux/kernel.h> #include <linux/types.h> #include <linux/interrupt.h> @@ -21,6 +25,7 @@ #include <linux/device.h> #include <linux/serial_core.h> #include <linux/platform_device.h> +#include <linux/of.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -62,13 +67,6 @@ void __init s3c6410_map_io(void) s3c_cfcon_setname("s3c64xx-pata"); } -void __init s3c6410_init_clocks(int xtal) -{ - printk(KERN_DEBUG "%s: initialising clocks\n", __func__); - s3c64xx_register_clocks(xtal, S3C6410_CLKDIV0_ARM_MASK); - s3c64xx_setup_clocks(); -} - void __init s3c6410_init_irq(void) { /* VIC0 is missing IRQ7, VIC1 is fully populated. */ @@ -86,6 +84,10 @@ static struct device s3c6410_dev = { static int __init s3c6410_core_init(void) { + /* Not applicable when using DT. */ + if (of_have_populated_dt()) + return 0; + return subsys_system_register(&s3c6410_subsys, NULL); } diff --git a/arch/arm/mach-s5pv210/include/mach/regs-clock.h b/arch/arm/mach-s5pv210/include/mach/regs-clock.h index 032de66fb8b..e345584d4c3 100644 --- a/arch/arm/mach-s5pv210/include/mach/regs-clock.h +++ b/arch/arm/mach-s5pv210/include/mach/regs-clock.h @@ -147,10 +147,6 @@ #define S5P_HDMI_PHY_CONTROL S5P_CLKREG(0xE804) #define S5P_USB_PHY_CONTROL S5P_CLKREG(0xE80C) #define S5P_DAC_PHY_CONTROL S5P_CLKREG(0xE810) -#define S5P_MIPI_DPHY_CONTROL(x) S5P_CLKREG(0xE814) -#define S5P_MIPI_DPHY_ENABLE (1 << 0) -#define S5P_MIPI_DPHY_SRESETN (1 << 1) -#define S5P_MIPI_DPHY_MRESETN (1 << 2) #define S5P_INFORM0 S5P_CLKREG(0xF000) #define S5P_INFORM1 S5P_CLKREG(0xF004) diff --git a/arch/arm/mach-shark/Makefile b/arch/arm/mach-shark/Makefile deleted file mode 100644 index 29657183c45..00000000000 --- a/arch/arm/mach-shark/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -# -# Makefile for the linux kernel. -# - -# Object file lists. - -obj-y := core.o dma.o irq.o pci.o leds.o -obj-m := -obj-n := -obj- := diff --git a/arch/arm/mach-shark/Makefile.boot b/arch/arm/mach-shark/Makefile.boot deleted file mode 100644 index e40e24e4ca3..00000000000 --- a/arch/arm/mach-shark/Makefile.boot +++ /dev/null @@ -1,2 +0,0 @@ - zreladdr-y += 0x08008000 - diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c deleted file mode 100644 index 1d32c5e8eab..00000000000 --- a/arch/arm/mach-shark/core.c +++ /dev/null @@ -1,146 +0,0 @@ -/* - * linux/arch/arm/mach-shark/arch.c - * - * Architecture specific stuff. - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/sched.h> -#include <linux/serial_8250.h> -#include <linux/io.h> -#include <linux/cpu.h> -#include <linux/reboot.h> - -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/param.h> -#include <asm/system_misc.h> - -#include <asm/mach/map.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> - -#define ROMCARD_SIZE 0x08000000 -#define ROMCARD_START 0x10000000 - -static void shark_restart(enum reboot_mode mode, const char *cmd) -{ - short temp; - /* Reset the Machine via pc[3] of the sequoia chipset */ - outw(0x09,0x24); - temp=inw(0x26); - temp = temp | (1<<3) | (1<<10); - outw(0x09,0x24); - outw(temp,0x26); -} - -static struct plat_serial8250_port serial_platform_data[] = { - { - .iobase = 0x3f8, - .irq = 4, - .uartclk = 1843200, - .regshift = 0, - .iotype = UPIO_PORT, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, - }, - { - .iobase = 0x2f8, - .irq = 3, - .uartclk = 1843200, - .regshift = 0, - .iotype = UPIO_PORT, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, - }, - { }, -}; - -static struct platform_device serial_device = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = serial_platform_data, - }, -}; - -static struct resource rtc_resources[] = { - [0] = { - .start = 0x70, - .end = 0x73, - .flags = IORESOURCE_IO, - }, - [1] = { - .start = IRQ_ISA_RTC_ALARM, - .end = IRQ_ISA_RTC_ALARM, - .flags = IORESOURCE_IRQ, - } -}; - -static struct platform_device rtc_device = { - .name = "rtc_cmos", - .id = -1, - .resource = rtc_resources, - .num_resources = ARRAY_SIZE(rtc_resources), -}; - -static int __init shark_init(void) -{ - int ret; - - if (machine_is_shark()) - { - ret = platform_device_register(&rtc_device); - if (ret) printk(KERN_ERR "Unable to register RTC device: %d\n", ret); - ret = platform_device_register(&serial_device); - if (ret) printk(KERN_ERR "Unable to register Serial device: %d\n", ret); - } - return 0; -} - -arch_initcall(shark_init); - -extern void shark_init_irq(void); - -#define IRQ_TIMER 0 -#define HZ_TIME ((1193180 + HZ/2) / HZ) - -static irqreturn_t -shark_timer_interrupt(int irq, void *dev_id) -{ - timer_tick(); - return IRQ_HANDLED; -} - -static struct irqaction shark_timer_irq = { - .name = "Shark Timer Tick", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = shark_timer_interrupt, -}; - -/* - * Set up timer interrupt, and return the current time in seconds. - */ -static void __init shark_timer_init(void) -{ - outb(0x34, 0x43); /* binary, mode 0, LSB/MSB, Ch 0 */ - outb(HZ_TIME & 0xff, 0x40); /* LSB of count */ - outb(HZ_TIME >> 8, 0x40); - - setup_irq(IRQ_TIMER, &shark_timer_irq); -} - -static void shark_init_early(void) -{ - cpu_idle_poll_ctrl(true); -} - -MACHINE_START(SHARK, "Shark") - /* Maintainer: Alexander Schulz */ - .atag_offset = 0x3000, - .init_early = shark_init_early, - .init_irq = shark_init_irq, - .init_time = shark_timer_init, - .dma_zone_size = SZ_4M, - .restart = shark_restart, -MACHINE_END diff --git a/arch/arm/mach-shark/dma.c b/arch/arm/mach-shark/dma.c deleted file mode 100644 index 10b5b8b3272..00000000000 --- a/arch/arm/mach-shark/dma.c +++ /dev/null @@ -1,23 +0,0 @@ -/* - * linux/arch/arm/mach-shark/dma.c - * - * by Alexander Schulz - * - * derived from: - * arch/arm/kernel/dma-ebsa285.c - * Copyright (C) 1998 Phil Blundell - */ - -#include <linux/init.h> - -#include <asm/dma.h> -#include <asm/mach/dma.h> - -static int __init shark_dma_init(void) -{ -#ifdef CONFIG_ISA_DMA - isa_init_dma(); -#endif - return 0; -} -core_initcall(shark_dma_init); diff --git a/arch/arm/mach-shark/include/mach/debug-macro.S b/arch/arm/mach-shark/include/mach/debug-macro.S deleted file mode 100644 index d129119a3f6..00000000000 --- a/arch/arm/mach-shark/include/mach/debug-macro.S +++ /dev/null @@ -1,34 +0,0 @@ -/* arch/arm/mach-shark/include/mach/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - - .macro addruart, rp, rv, tmp - mov \rp, #0x3f8 - orr \rv, \rp, #0xfe000000 - orr \rv, \rv, #0x00e00000 - orr \rp, \rp, #0x40000000 - .endm - - .macro senduart,rd,rx - strb \rd, [\rx] - .endm - - .macro waituart,rd,rx - .endm - - .macro busyuart,rd,rx - mov \rd, #0 -1001: add \rd, \rd, #1 - teq \rd, #0x10000 - bne 1001b - .endm - diff --git a/arch/arm/mach-shark/include/mach/entry-macro.S b/arch/arm/mach-shark/include/mach/entry-macro.S deleted file mode 100644 index c9e49f04953..00000000000 --- a/arch/arm/mach-shark/include/mach/entry-macro.S +++ /dev/null @@ -1,36 +0,0 @@ -/* - * arch/arm/mach-shark/include/mach/entry-macro.S - * - * Low-level IRQ helper macros for Shark platform - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - .macro get_irqnr_preamble, base, tmp - mov \base, #0xfe000000 - orr \base, \base, #0x00e00000 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - - mov \irqstat, #0x0C - strb \irqstat, [\base, #0x20] @outb(0x0C, 0x20) /* Poll command */ - ldrb \irqnr, [\base, #0x20] @irq = inb(0x20) & 7 - and \irqstat, \irqnr, #0x80 - teq \irqstat, #0 - beq 43f - and \irqnr, \irqnr, #7 - teq \irqnr, #2 - bne 44f -43: mov \irqstat, #0x0C - strb \irqstat, [\base, #0xa0] @outb(0x0C, 0xA0) /* Poll command */ - ldrb \irqnr, [\base, #0xa0] @irq = (inb(0xA0) & 7) + 8 - and \irqstat, \irqnr, #0x80 - teq \irqstat, #0 - beq 44f - and \irqnr, \irqnr, #7 - add \irqnr, \irqnr, #8 -44: teq \irqstat, #0 - .endm - diff --git a/arch/arm/mach-shark/include/mach/framebuffer.h b/arch/arm/mach-shark/include/mach/framebuffer.h deleted file mode 100644 index 84a5bf6e5ba..00000000000 --- a/arch/arm/mach-shark/include/mach/framebuffer.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * arch/arm/mach-shark/include/mach/framebuffer.h - * - * by Alexander Schulz - * - */ - -#ifndef __ASM_ARCH_FRAMEBUFFER_H -#define __ASM_ARCH_FRAMEBUFFER_H - -/* defines for the Framebuffer */ -#define FB_START 0x06000000 -#define FB_SIZE 0x01000000 - -#endif - diff --git a/arch/arm/mach-shark/include/mach/hardware.h b/arch/arm/mach-shark/include/mach/hardware.h deleted file mode 100644 index 663f952a8ab..00000000000 --- a/arch/arm/mach-shark/include/mach/hardware.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * arch/arm/mach-shark/include/mach/hardware.h - * - * by Alexander Schulz - * - * derived from: - * arch/arm/mach-ebsa110/include/mach/hardware.h - * Copyright (C) 1996-1999 Russell King. - */ -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#define UNCACHEABLE_ADDR 0xdf010000 - -#endif - diff --git a/arch/arm/mach-shark/include/mach/irqs.h b/arch/arm/mach-shark/include/mach/irqs.h deleted file mode 100644 index c8e8a4e1f61..00000000000 --- a/arch/arm/mach-shark/include/mach/irqs.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * arch/arm/mach-shark/include/mach/irqs.h - * - * by Alexander Schulz - */ - -#define NR_IRQS 16 - -#define IRQ_ISA_KEYBOARD 1 -#define IRQ_ISA_RTC_ALARM 8 -#define I8042_KBD_IRQ 1 -#define I8042_AUX_IRQ 12 -#define IRQ_HARDDISK 14 diff --git a/arch/arm/mach-shark/include/mach/isa-dma.h b/arch/arm/mach-shark/include/mach/isa-dma.h deleted file mode 100644 index 96c43b8f8dd..00000000000 --- a/arch/arm/mach-shark/include/mach/isa-dma.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * arch/arm/mach-shark/include/mach/isa-dma.h - * - * by Alexander Schulz - */ -#ifndef __ASM_ARCH_DMA_H -#define __ASM_ARCH_DMA_H - -#define MAX_DMA_CHANNELS 8 -#define DMA_ISA_CASCADE 4 - -#endif /* _ASM_ARCH_DMA_H */ - diff --git a/arch/arm/mach-shark/include/mach/memory.h b/arch/arm/mach-shark/include/mach/memory.h deleted file mode 100644 index 1cf8d696261..00000000000 --- a/arch/arm/mach-shark/include/mach/memory.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * arch/arm/mach-shark/include/mach/memory.h - * - * by Alexander Schulz - * - * derived from: - * arch/arm/mach-ebsa110/include/mach/memory.h - * Copyright (c) 1996-1999 Russell King. - */ -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#include <asm/sizes.h> - -/* - * Physical DRAM offset. - */ -#define PLAT_PHYS_OFFSET UL(0x08000000) - -/* - * Cache flushing area - */ -#define FLUSH_BASE_PHYS 0x80000000 -#define FLUSH_BASE 0xdf000000 - -#endif diff --git a/arch/arm/mach-shark/include/mach/timex.h b/arch/arm/mach-shark/include/mach/timex.h deleted file mode 100644 index bb6eeaebed8..00000000000 --- a/arch/arm/mach-shark/include/mach/timex.h +++ /dev/null @@ -1,7 +0,0 @@ -/* - * arch/arm/mach-shark/include/mach/timex.h - * - * by Alexander Schulz - */ - -#define CLOCK_TICK_RATE 1193180 diff --git a/arch/arm/mach-shark/include/mach/uncompress.h b/arch/arm/mach-shark/include/mach/uncompress.h deleted file mode 100644 index a168435aecc..00000000000 --- a/arch/arm/mach-shark/include/mach/uncompress.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * arch/arm/mach-shark/include/mach/uncompress.h - * by Alexander Schulz - * - * derived from: - * arch/arm/mach-footbridge/include/mach/uncompress.h - * Copyright (C) 1996,1997,1998 Russell King - */ - -#define SERIAL_BASE ((volatile unsigned char *)0x400003f8) - -static inline void putc(int c) -{ - volatile int t; - - SERIAL_BASE[0] = c; - t=0x10000; - while (t--); -} - -static inline void flush(void) -{ -} - -#ifdef DEBUG -static void putn(unsigned long z) -{ - int i; - char x; - - putc('0'); - putc('x'); - for (i=0;i<8;i++) { - x='0'+((z>>((7-i)*4))&0xf); - if (x>'9') x=x-'0'+'A'-10; - putc(x); - } -} - -static void putr() -{ - putc('\n'); - putc('\r'); -} -#endif - -/* - * nothing to do - */ -#define arch_decomp_setup() diff --git a/arch/arm/mach-shark/irq.c b/arch/arm/mach-shark/irq.c deleted file mode 100644 index 5dce13e429f..00000000000 --- a/arch/arm/mach-shark/irq.c +++ /dev/null @@ -1,108 +0,0 @@ -/* - * linux/arch/arm/mach-shark/irq.c - * - * by Alexander Schulz - * - * derived from linux/arch/ppc/kernel/i8259.c and: - * arch/arm/mach-ebsa110/include/mach/irq.h - * Copyright (C) 1996-1998 Russell King - */ - -#include <linux/init.h> -#include <linux/fs.h> -#include <linux/interrupt.h> -#include <linux/io.h> - -#include <asm/irq.h> -#include <asm/mach/irq.h> - -/* - * 8259A PIC functions to handle ISA devices: - */ - -/* - * This contains the irq mask for both 8259A irq controllers, - * Let through the cascade-interrupt no. 2 (ff-(1<<2)==fb) - */ -static unsigned char cached_irq_mask[2] = { 0xfb, 0xff }; - -/* - * These have to be protected by the irq controller spinlock - * before being called. - */ -static void shark_disable_8259A_irq(struct irq_data *d) -{ - unsigned int mask; - if (d->irq<8) { - mask = 1 << d->irq; - cached_irq_mask[0] |= mask; - outb(cached_irq_mask[1],0xA1); - } else { - mask = 1 << (d->irq-8); - cached_irq_mask[1] |= mask; - outb(cached_irq_mask[0],0x21); - } -} - -static void shark_enable_8259A_irq(struct irq_data *d) -{ - unsigned int mask; - if (d->irq<8) { - mask = ~(1 << d->irq); - cached_irq_mask[0] &= mask; - outb(cached_irq_mask[0],0x21); - } else { - mask = ~(1 << (d->irq-8)); - cached_irq_mask[1] &= mask; - outb(cached_irq_mask[1],0xA1); - } -} - -static void shark_ack_8259A_irq(struct irq_data *d){} - -static irqreturn_t bogus_int(int irq, void *dev_id) -{ - printk("Got interrupt %i!\n",irq); - return IRQ_NONE; -} - -static struct irqaction cascade; - -static struct irq_chip fb_chip = { - .name = "XT-PIC", - .irq_ack = shark_ack_8259A_irq, - .irq_mask = shark_disable_8259A_irq, - .irq_unmask = shark_enable_8259A_irq, -}; - -void __init shark_init_irq(void) -{ - int irq; - - for (irq = 0; irq < NR_IRQS; irq++) { - irq_set_chip_and_handler(irq, &fb_chip, handle_edge_irq); - set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); - } - - /* init master interrupt controller */ - outb(0x11, 0x20); /* Start init sequence, edge triggered (level: 0x19)*/ - outb(0x00, 0x21); /* Vector base */ - outb(0x04, 0x21); /* Cascade (slave) on IRQ2 */ - outb(0x03, 0x21); /* Select 8086 mode , auto eoi*/ - outb(0x0A, 0x20); - /* init slave interrupt controller */ - outb(0x11, 0xA0); /* Start init sequence, edge triggered */ - outb(0x08, 0xA1); /* Vector base */ - outb(0x02, 0xA1); /* Cascade (slave) on IRQ2 */ - outb(0x03, 0xA1); /* Select 8086 mode, auto eoi */ - outb(0x0A, 0xA0); - outb(cached_irq_mask[1],0xA1); - outb(cached_irq_mask[0],0x21); - //request_region(0x20,0x2,"pic1"); - //request_region(0xA0,0x2,"pic2"); - - cascade.handler = bogus_int; - cascade.name = "cascade"; - setup_irq(2,&cascade); -} - diff --git a/arch/arm/mach-shark/leds.c b/arch/arm/mach-shark/leds.c deleted file mode 100644 index 081c778a10a..00000000000 --- a/arch/arm/mach-shark/leds.c +++ /dev/null @@ -1,117 +0,0 @@ -/* - * DIGITAL Shark LED control routines. - * - * Driver for the 3 user LEDs found on the Shark - * Based on Versatile and RealView machine LED code - * - * License terms: GNU General Public License (GPL) version 2 - * Author: Bryan Wu <bryan.wu@canonical.com> - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/io.h> -#include <linux/ioport.h> -#include <linux/slab.h> -#include <linux/leds.h> - -#include <asm/mach-types.h> - -#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS) -struct shark_led { - struct led_classdev cdev; - u8 mask; -}; - -/* - * The triggers lines up below will only be used if the - * LED triggers are compiled in. - */ -static const struct { - const char *name; - const char *trigger; -} shark_leds[] = { - { "shark:amber0", "default-on", }, /* Bit 5 */ - { "shark:green", "heartbeat", }, /* Bit 6 */ - { "shark:amber1", "cpu0" }, /* Bit 7 */ -}; - -static u16 led_reg_read(void) -{ - outw(0x09, 0x24); - return inw(0x26); -} - -static void led_reg_write(u16 value) -{ - outw(0x09, 0x24); - outw(value, 0x26); -} - -static void shark_led_set(struct led_classdev *cdev, - enum led_brightness b) -{ - struct shark_led *led = container_of(cdev, - struct shark_led, cdev); - u16 reg = led_reg_read(); - - if (b != LED_OFF) - reg |= led->mask; - else - reg &= ~led->mask; - - led_reg_write(reg); -} - -static enum led_brightness shark_led_get(struct led_classdev *cdev) -{ - struct shark_led *led = container_of(cdev, - struct shark_led, cdev); - u16 reg = led_reg_read(); - - return (reg & led->mask) ? LED_FULL : LED_OFF; -} - -static int __init shark_leds_init(void) -{ - int i; - u16 reg; - - if (!machine_is_shark()) - return -ENODEV; - - for (i = 0; i < ARRAY_SIZE(shark_leds); i++) { - struct shark_led *led; - - led = kzalloc(sizeof(*led), GFP_KERNEL); - if (!led) - break; - - led->cdev.name = shark_leds[i].name; - led->cdev.brightness_set = shark_led_set; - led->cdev.brightness_get = shark_led_get; - led->cdev.default_trigger = shark_leds[i].trigger; - - /* Count in 5 bits offset */ - led->mask = BIT(i + 5); - - if (led_classdev_register(NULL, &led->cdev) < 0) { - kfree(led); - break; - } - } - - /* Make LEDs independent of power-state */ - request_region(0x24, 4, "led_reg"); - reg = led_reg_read(); - reg |= 1 << 10; - led_reg_write(reg); - - return 0; -} - -/* - * Since we may have triggers on any subsystem, defer registration - * until after subsystem_init. - */ -fs_initcall(shark_leds_init); -#endif diff --git a/arch/arm/mach-shark/pci.c b/arch/arm/mach-shark/pci.c deleted file mode 100644 index 6d91a914c1d..00000000000 --- a/arch/arm/mach-shark/pci.c +++ /dev/null @@ -1,57 +0,0 @@ -/* - * linux/arch/arm/mach-shark/pci.c - * - * PCI bios-type initialisation for PCI machines - * - * Bits taken from various places. - */ -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/io.h> -#include <video/vga.h> - -#include <asm/irq.h> -#include <asm/mach/pci.h> -#include <asm/mach-types.h> - -#define IO_START 0x40000000 - -static int __init shark_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - if (dev->bus->number == 0) - if (dev->devfn == 0) - return 255; - else - return 11; - else - return 255; -} - -extern void __init via82c505_preinit(void); - -static struct hw_pci shark_pci __initdata = { - .setup = via82c505_setup, - .map_irq = shark_map_irq, - .nr_controllers = 1, - .ops = &via82c505_ops, - .preinit = via82c505_preinit, -}; - -static int __init shark_pci_init(void) -{ - if (!machine_is_shark()) - return -ENODEV; - - pcibios_min_io = 0x6000; - pcibios_min_mem = 0x50000000; - vga_base = 0xe8000000; - - pci_ioremap_io(0, IO_START); - - pci_common_init(&shark_pci); - - return 0; -} - -subsys_initcall(shark_pci_init); diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 1f94c310c47..a4a4b75109b 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -22,16 +22,10 @@ config ARCH_EMEV2 comment "SH-Mobile Board Type" -config MACH_KZM9D_REFERENCE - bool "KZM9D board - Reference Device Tree Implementation" +config MACH_KZM9D + bool "KZM9D board" depends on ARCH_EMEV2 select REGULATOR_FIXED_VOLTAGE if REGULATOR - ---help--- - Use reference implementation of KZM9D board support - which makes a greater use of device tree at the expense - of not supporting a number of devices. - - This is intended to aid developers comment "SH-Mobile System Configuration" endif @@ -101,12 +95,24 @@ config ARCH_R8A7790 select SH_CLK_CPG select RENESAS_IRQC +config ARCH_R8A7791 + bool "R-Car M2 (R8A77910)" + select ARM_GIC + select CPU_V7 + select SH_CLK_CPG + config ARCH_EMEV2 bool "Emma Mobile EV2" select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_GIC select CPU_V7 +config ARCH_R7S72100 + bool "RZ/A1H (R7S72100)" + select ARM_GIC + select CPU_V7 + select SH_CLK_CPG + comment "SH-Mobile Board Type" config MACH_APE6EVM @@ -162,6 +168,8 @@ config MACH_BOCKW select RENESAS_INTC_IRQPIN select REGULATOR_FIXED_VOLTAGE if REGULATOR select USE_OF + select SND_SOC_AK4554 if SND_SIMPLE_CARD + select SND_SOC_AK4642 if SND_SIMPLE_CARD config MACH_BOCKW_REFERENCE bool "BOCK-W - Reference Device Tree Implementation" @@ -177,6 +185,11 @@ config MACH_BOCKW_REFERENCE This is intended to aid developers +config MACH_GENMAI + bool "Genmai board" + depends on ARCH_R7S72100 + select USE_OF + config MACH_MARZEN bool "MARZEN board" depends on ARCH_R8A7779 @@ -213,23 +226,16 @@ config MACH_LAGER_REFERENCE This is intended to aid developers -config MACH_KZM9D - bool "KZM9D board" - depends on ARCH_EMEV2 - select REGULATOR_FIXED_VOLTAGE if REGULATOR +config MACH_KOELSCH + bool "Koelsch board" + depends on ARCH_R8A7791 select USE_OF -config MACH_KZM9D_REFERENCE - bool "KZM9D board - Reference Device Tree Implementation" +config MACH_KZM9D + bool "KZM9D board" depends on ARCH_EMEV2 select REGULATOR_FIXED_VOLTAGE if REGULATOR select USE_OF - ---help--- - Use reference implementation of KZM9D board support - which makes a greater use of device tree at the expense - of not supporting a number of devices. - - This is intended to aid developers config MACH_KZM9G bool "KZM-A9-GT board" diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index 2705bfa8c11..51db2bcafab 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -15,7 +15,10 @@ obj-$(CONFIG_ARCH_R8A7740) += setup-r8a7740.o obj-$(CONFIG_ARCH_R8A7778) += setup-r8a7778.o obj-$(CONFIG_ARCH_R8A7779) += setup-r8a7779.o obj-$(CONFIG_ARCH_R8A7790) += setup-r8a7790.o +obj-$(CONFIG_ARCH_R8A7790) += setup-r8a7790.o setup-rcar-gen2.o +obj-$(CONFIG_ARCH_R8A7791) += setup-r8a7791.o setup-rcar-gen2.o obj-$(CONFIG_ARCH_EMEV2) += setup-emev2.o +obj-$(CONFIG_ARCH_R7S72100) += setup-r7s72100.o # Clock objects ifndef CONFIG_COMMON_CLK @@ -27,13 +30,17 @@ obj-$(CONFIG_ARCH_R8A7740) += clock-r8a7740.o obj-$(CONFIG_ARCH_R8A7778) += clock-r8a7778.o obj-$(CONFIG_ARCH_R8A7779) += clock-r8a7779.o obj-$(CONFIG_ARCH_R8A7790) += clock-r8a7790.o +obj-$(CONFIG_ARCH_R8A7791) += clock-r8a7791.o obj-$(CONFIG_ARCH_EMEV2) += clock-emev2.o +obj-$(CONFIG_ARCH_R7S72100) += clock-r7s72100.o endif # SMP objects smp-y := platsmp.o headsmp.o smp-$(CONFIG_ARCH_SH73A0) += smp-sh73a0.o headsmp-scu.o platsmp-scu.o smp-$(CONFIG_ARCH_R8A7779) += smp-r8a7779.o headsmp-scu.o platsmp-scu.o +smp-$(CONFIG_ARCH_R8A7790) += smp-r8a7790.o platsmp-apmu.o +smp-$(CONFIG_ARCH_R8A7791) += smp-r8a7791.o platsmp-apmu.o smp-$(CONFIG_ARCH_EMEV2) += smp-emev2.o headsmp-scu.o platsmp-scu.o # IRQ objects @@ -48,21 +55,26 @@ obj-$(CONFIG_ARCH_R8A7740) += pm-r8a7740.o pm-rmobile.o obj-$(CONFIG_ARCH_R8A7779) += pm-r8a7779.o # Board objects +ifdef CONFIG_ARCH_SHMOBILE_MULTI +obj-$(CONFIG_MACH_KZM9D) += board-kzm9d-reference.o +else obj-$(CONFIG_MACH_APE6EVM) += board-ape6evm.o obj-$(CONFIG_MACH_APE6EVM_REFERENCE) += board-ape6evm-reference.o obj-$(CONFIG_MACH_MACKEREL) += board-mackerel.o obj-$(CONFIG_MACH_BOCKW) += board-bockw.o obj-$(CONFIG_MACH_BOCKW_REFERENCE) += board-bockw-reference.o +obj-$(CONFIG_MACH_GENMAI) += board-genmai.o obj-$(CONFIG_MACH_MARZEN) += board-marzen.o obj-$(CONFIG_MACH_MARZEN_REFERENCE) += board-marzen-reference.o obj-$(CONFIG_MACH_LAGER) += board-lager.o obj-$(CONFIG_MACH_LAGER_REFERENCE) += board-lager-reference.o obj-$(CONFIG_MACH_ARMADILLO800EVA) += board-armadillo800eva.o obj-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE) += board-armadillo800eva-reference.o +obj-$(CONFIG_MACH_KOELSCH) += board-koelsch.o obj-$(CONFIG_MACH_KZM9D) += board-kzm9d.o -obj-$(CONFIG_MACH_KZM9D_REFERENCE) += board-kzm9d-reference.o obj-$(CONFIG_MACH_KZM9G) += board-kzm9g.o obj-$(CONFIG_MACH_KZM9G_REFERENCE) += board-kzm9g-reference.o +endif # Framework support obj-$(CONFIG_SMP) += $(smp-y) diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot index 6a504fe7d86..391d72a5536 100644 --- a/arch/arm/mach-shmobile/Makefile.boot +++ b/arch/arm/mach-shmobile/Makefile.boot @@ -6,8 +6,9 @@ loadaddr-$(CONFIG_MACH_ARMADILLO800EVA) += 0x40008000 loadaddr-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE) += 0x40008000 loadaddr-$(CONFIG_MACH_BOCKW) += 0x60008000 loadaddr-$(CONFIG_MACH_BOCKW_REFERENCE) += 0x60008000 +loadaddr-$(CONFIG_MACH_GENMAI) += 0x8008000 +loadaddr-$(CONFIG_MACH_KOELSCH) += 0x40008000 loadaddr-$(CONFIG_MACH_KZM9D) += 0x40008000 -loadaddr-$(CONFIG_MACH_KZM9D_REFERENCE) += 0x40008000 loadaddr-$(CONFIG_MACH_KZM9G) += 0x41008000 loadaddr-$(CONFIG_MACH_KZM9G_REFERENCE) += 0x41008000 loadaddr-$(CONFIG_MACH_LAGER) += 0x40008000 diff --git a/arch/arm/mach-shmobile/board-ape6evm-reference.c b/arch/arm/mach-shmobile/board-ape6evm-reference.c index a23fa714f7a..3276afcf3cc 100644 --- a/arch/arm/mach-shmobile/board-ape6evm-reference.c +++ b/arch/arm/mach-shmobile/board-ape6evm-reference.c @@ -57,7 +57,7 @@ static const char *ape6evm_boards_compat_dt[] __initdata = { }; DT_MACHINE_START(APE6EVM_DT, "ape6evm") - .init_early = r8a73a4_init_delay, + .init_early = r8a73a4_init_early, .init_machine = ape6evm_add_standard_devices, .dt_compat = ape6evm_boards_compat_dt, MACHINE_END diff --git a/arch/arm/mach-shmobile/board-ape6evm.c b/arch/arm/mach-shmobile/board-ape6evm.c index 24b87eea9da..0fa068e30a3 100644 --- a/arch/arm/mach-shmobile/board-ape6evm.c +++ b/arch/arm/mach-shmobile/board-ape6evm.c @@ -86,7 +86,7 @@ static struct gpio_keys_button gpio_buttons[] = { GPIO_KEY(KEY_VOLUMEDOWN, 329, "S21"), }; -static struct __initdata gpio_keys_platform_data ape6evm_keys_pdata = { +static struct gpio_keys_platform_data ape6evm_keys_pdata __initdata = { .buttons = gpio_buttons, .nbuttons = ARRAY_SIZE(gpio_buttons), }; @@ -113,22 +113,58 @@ static const struct smsc911x_platform_config lan9220_data __initconst = { }; /* - * On APE6EVM power is supplied to MMCIF by a tps80032 regulator. For now we - * model a VDD supply to MMCIF, using a fixed 3.3V regulator. Also use the - * static power supply for SDHI0 and SDHI1, whereas SDHI0's VccQ is also - * supplied by the same tps80032 regulator and thus can also be adjusted - * dynamically. + * MMC0 power supplies: + * Both Vcc and VccQ to eMMC on APE6EVM are supplied by a tps80032 voltage + * regulator. Until support for it is added to this file we simulate the + * Vcc supply by a fixed always-on regulator */ -static struct regulator_consumer_supply fixed3v3_power_consumers[] = +static struct regulator_consumer_supply vcc_mmc0_consumers[] = { REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"), +}; + +/* + * SDHI0 power supplies: + * Vcc to SDHI0 on APE6EVM is supplied by a GPIO-switchable regulator. VccQ is + * provided by the same tps80032 regulator as both MMC0 voltages - see comment + * above + */ +static struct regulator_consumer_supply vcc_sdhi0_consumers[] = +{ REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), +}; + +static struct regulator_init_data vcc_sdhi0_init_data = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(vcc_sdhi0_consumers), + .consumer_supplies = vcc_sdhi0_consumers, +}; + +static const struct fixed_voltage_config vcc_sdhi0_info __initconst = { + .supply_name = "SDHI0 Vcc", + .microvolts = 3300000, + .gpio = 76, + .enable_high = 1, + .init_data = &vcc_sdhi0_init_data, +}; + +/* + * SDHI1 power supplies: + * Vcc and VccQ to SDHI1 on APE6EVM are both fixed at 3.3V + */ +static struct regulator_consumer_supply vcc_sdhi1_consumers[] = +{ REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"), }; /* MMCIF */ static const struct sh_mmcif_plat_data mmcif0_pdata __initconst = { .caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE, + .slave_id_tx = SHDMA_SLAVE_MMCIF0_TX, + .slave_id_rx = SHDMA_SLAVE_MMCIF0_RX, + .ccs_unsupported = true, }; static const struct resource mmcif0_resources[] __initconst = { @@ -215,14 +251,19 @@ static void __init ape6evm_add_standard_devices(void) platform_device_register_resndata(&platform_bus, "smsc911x", -1, lan9220_res, ARRAY_SIZE(lan9220_res), &lan9220_data, sizeof(lan9220_data)); - regulator_register_always_on(1, "fixed-3.3V", fixed3v3_power_consumers, - ARRAY_SIZE(fixed3v3_power_consumers), 3300000); + + regulator_register_always_on(1, "MMC0 Vcc", vcc_mmc0_consumers, + ARRAY_SIZE(vcc_mmc0_consumers), 2800000); platform_device_register_resndata(&platform_bus, "sh_mmcif", 0, mmcif0_resources, ARRAY_SIZE(mmcif0_resources), &mmcif0_pdata, sizeof(mmcif0_pdata)); + platform_device_register_data(&platform_bus, "reg-fixed-voltage", 2, + &vcc_sdhi0_info, sizeof(vcc_sdhi0_info)); platform_device_register_resndata(&platform_bus, "sh_mobile_sdhi", 0, sdhi0_resources, ARRAY_SIZE(sdhi0_resources), &sdhi0_pdata, sizeof(sdhi0_pdata)); + regulator_register_always_on(3, "SDHI1 Vcc", vcc_sdhi1_consumers, + ARRAY_SIZE(vcc_sdhi1_consumers), 3300000); platform_device_register_resndata(&platform_bus, "sh_mobile_sdhi", 1, sdhi1_resources, ARRAY_SIZE(sdhi1_resources), &sdhi1_pdata, sizeof(sdhi1_pdata)); @@ -240,7 +281,7 @@ static const char *ape6evm_boards_compat_dt[] __initdata = { }; DT_MACHINE_START(APE6EVM_DT, "ape6evm") - .init_early = r8a73a4_init_delay, + .init_early = r8a73a4_init_early, .init_machine = ape6evm_add_standard_devices, .dt_compat = ape6evm_boards_compat_dt, MACHINE_END diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index 7f8f6076d36..8bc8e4c5884 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -823,6 +823,7 @@ static struct sh_mmcif_plat_data sh_mmcif_plat = { .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE, + .ccs_unsupported = true, .slave_id_tx = SHDMA_SLAVE_MMCIF_TX, .slave_id_rx = SHDMA_SLAVE_MMCIF_RX, }; diff --git a/arch/arm/mach-shmobile/board-bockw-reference.c b/arch/arm/mach-shmobile/board-bockw-reference.c index 1a7c893e1a5..ae88fdad4b3 100644 --- a/arch/arm/mach-shmobile/board-bockw-reference.c +++ b/arch/arm/mach-shmobile/board-bockw-reference.c @@ -36,15 +36,35 @@ static const struct pinctrl_map bockw_pinctrl_map[] = { "scif0_ctrl", "scif0"), }; +#define FPGA 0x18200000 +#define IRQ0MR 0x30 +#define COMCTLR 0x101c static void __init bockw_init(void) { + static void __iomem *fpga; + r8a7778_clock_init(); + r8a7778_init_irq_extpin_dt(1); pinctrl_register_mappings(bockw_pinctrl_map, ARRAY_SIZE(bockw_pinctrl_map)); r8a7778_pinmux_init(); r8a7778_add_dt_devices(); + fpga = ioremap_nocache(FPGA, SZ_1M); + if (fpga) { + /* + * CAUTION + * + * IRQ0/1 is cascaded interrupt from FPGA. + * it should be cared in the future + * Now, it is assuming IRQ0 was used only from SMSC. + */ + u16 val = ioread16(fpga + IRQ0MR); + val &= ~(1 << 4); /* enable SMSC911x */ + iowrite16(val, fpga + IRQ0MR); + } + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } diff --git a/arch/arm/mach-shmobile/board-bockw.c b/arch/arm/mach-shmobile/board-bockw.c index 6b9faf3908f..38611526fe9 100644 --- a/arch/arm/mach-shmobile/board-bockw.c +++ b/arch/arm/mach-shmobile/board-bockw.c @@ -32,11 +32,19 @@ #include <linux/smsc911x.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> +#include <linux/usb/renesas_usbhs.h> #include <media/soc_camera.h> #include <mach/common.h> #include <mach/irqs.h> #include <mach/r8a7778.h> #include <asm/mach/arch.h> +#include <sound/rcar_snd.h> +#include <sound/simple_card.h> + +#define FPGA 0x18200000 +#define IRQ0MR 0x30 +#define COMCTLR 0x101c +static void __iomem *fpga; /* * CN9(Upper side) SCIF/RCAN selection @@ -63,6 +71,45 @@ * SW19 (MMC) 1 pin */ +/* + * SSI settings + * + * SW45: 1-4 side (SSI5 out, ROUT/LOUT CN19 Mid) + * SW46: 1101 (SSI6 Recorde) + * SW47: 1110 (SSI5 Playback) + * SW48: 11 (Recorde power) + * SW49: 1 (SSI slave mode) + * SW50: 1111 (SSI7, SSI8) + * SW51: 1111 (SSI3, SSI4) + * SW54: 1pin (ak4554 FPGA control) + * SW55: 1 (CLKB is 24.5760MHz) + * SW60: 1pin (ak4554 FPGA control) + * SW61: 3pin (use X11 clock) + * SW78: 3-6 (ak4642 connects I2C0) + * + * You can use sound as + * + * hw0: CN19: SSI56-AK4643 + * hw1: CN21: SSI3-AK4554(playback) + * hw2: CN21: SSI4-AK4554(capture) + * hw3: CN20: SSI7-AK4554(playback) + * hw4: CN20: SSI8-AK4554(capture) + * + * this command is required when playback on hw0. + * + * # amixer set "LINEOUT Mixer DACL" on + */ + +/* + * USB + * + * USB1 (CN29) can be Host/Function + * + * Host Func + * SW98 1 2 + * SW99 1 3 + */ + /* Dummy supplies, where voltage doesn't matter */ static struct regulator_consumer_supply dummy_supplies[] = { REGULATOR_SUPPLY("vddvario", "smsc911x"), @@ -81,16 +128,76 @@ static struct resource smsc911x_resources[] __initdata = { DEFINE_RES_IRQ(irq_pin(0)), /* IRQ 0 */ }; +#if IS_ENABLED(CONFIG_USB_RENESAS_USBHS_UDC) +/* + * When USB1 is Func + */ +static int usbhsf_get_id(struct platform_device *pdev) +{ + return USBHS_GADGET; +} + +#define SUSPMODE 0x102 +static int usbhsf_power_ctrl(struct platform_device *pdev, + void __iomem *base, int enable) +{ + enable = !!enable; + + r8a7778_usb_phy_power(enable); + + iowrite16(enable << 14, base + SUSPMODE); + + return 0; +} + +static struct resource usbhsf_resources[] __initdata = { + DEFINE_RES_MEM(0xffe60000, 0x110), + DEFINE_RES_IRQ(gic_iid(0x4f)), +}; + +static struct renesas_usbhs_platform_info usbhs_info __initdata = { + .platform_callback = { + .get_id = usbhsf_get_id, + .power_ctrl = usbhsf_power_ctrl, + }, + .driver_param = { + .buswait_bwait = 4, + }, +}; + +#define USB_PHY_SETTING {.port1_func = 1, .ovc_pin[1].active_high = 1,} +#define USB1_DEVICE "renesas_usbhs" +#define ADD_USB_FUNC_DEVICE_IF_POSSIBLE() \ + platform_device_register_resndata( \ + &platform_bus, "renesas_usbhs", -1, \ + usbhsf_resources, \ + ARRAY_SIZE(usbhsf_resources), \ + &usbhs_info, sizeof(struct renesas_usbhs_platform_info)) + +#else +/* + * When USB1 is Host + */ +#define USB_PHY_SETTING { } +#define USB1_DEVICE "ehci-platform" +#define ADD_USB_FUNC_DEVICE_IF_POSSIBLE() + +#endif + /* USB */ static struct resource usb_phy_resources[] __initdata = { DEFINE_RES_MEM(0xffe70800, 0x100), DEFINE_RES_MEM(0xffe76000, 0x100), }; -static struct rcar_phy_platform_data usb_phy_platform_data __initdata; +static struct rcar_phy_platform_data usb_phy_platform_data __initdata = + USB_PHY_SETTING; + /* SDHI */ static struct sh_mobile_sdhi_info sdhi0_info __initdata = { + .dma_slave_tx = HPBDMA_SLAVE_SDHI0_TX, + .dma_slave_rx = HPBDMA_SLAVE_SDHI0_RX, .tmio_caps = MMC_CAP_SD_HIGHSPEED, .tmio_ocr_mask = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT, @@ -101,6 +208,12 @@ static struct resource sdhi0_resources[] __initdata = { DEFINE_RES_IRQ(gic_iid(0x77)), }; +/* Ether */ +static struct resource ether_resources[] __initdata = { + DEFINE_RES_MEM(0xfde00000, 0x400), + DEFINE_RES_IRQ(gic_iid(0x89)), +}; + static struct sh_eth_plat_data ether_platform_data __initdata = { .phy = 0x01, .edmac_endian = EDMAC_LITTLE_ENDIAN, @@ -118,7 +231,9 @@ static struct sh_eth_plat_data ether_platform_data __initdata = { static struct i2c_board_info i2c0_devices[] = { { I2C_BOARD_INFO("rx8581", 0x51), - }, + }, { + I2C_BOARD_INFO("ak4643", 0x12), + } }; /* HSPI*/ @@ -162,10 +277,6 @@ static struct sh_mmcif_plat_data sh_mmcif_plat __initdata = { MMC_CAP_NEEDS_POLL, }; -static struct rcar_vin_platform_data vin_platform_data __initdata = { - .flags = RCAR_VIN_BT656, -}; - /* In the default configuration both decoders reside on I2C bus 0 */ #define BOCKW_CAMERA(idx) \ static struct i2c_board_info camera##idx##_info = { \ @@ -181,7 +292,237 @@ static struct soc_camera_link iclink##idx##_ml86v7667 __initdata = { \ BOCKW_CAMERA(0); BOCKW_CAMERA(1); +/* VIN */ +static struct rcar_vin_platform_data vin_platform_data __initdata = { + .flags = RCAR_VIN_BT656, +}; + +#define R8A7778_VIN(idx) \ +static struct resource vin##idx##_resources[] __initdata = { \ + DEFINE_RES_MEM(0xffc50000 + 0x1000 * (idx), 0x1000), \ + DEFINE_RES_IRQ(gic_iid(0x5a)), \ +}; \ + \ +static struct platform_device_info vin##idx##_info __initdata = { \ + .parent = &platform_bus, \ + .name = "r8a7778-vin", \ + .id = idx, \ + .res = vin##idx##_resources, \ + .num_res = ARRAY_SIZE(vin##idx##_resources), \ + .dma_mask = DMA_BIT_MASK(32), \ + .data = &vin_platform_data, \ + .size_data = sizeof(vin_platform_data), \ +} +R8A7778_VIN(0); +R8A7778_VIN(1); + +/* Sound */ +static struct resource rsnd_resources[] __initdata = { + [RSND_GEN1_SRU] = DEFINE_RES_MEM(0xffd90000, 0x1000), + [RSND_GEN1_SSI] = DEFINE_RES_MEM(0xffd91000, 0x1240), + [RSND_GEN1_ADG] = DEFINE_RES_MEM(0xfffe0000, 0x24), +}; + +static struct rsnd_ssi_platform_info rsnd_ssi[] = { + RSND_SSI_UNUSED, /* SSI 0 */ + RSND_SSI_UNUSED, /* SSI 1 */ + RSND_SSI_UNUSED, /* SSI 2 */ + RSND_SSI_SET(1, 0, gic_iid(0x85), RSND_SSI_PLAY), + RSND_SSI_SET(2, 0, gic_iid(0x85), RSND_SSI_CLK_PIN_SHARE | RSND_SSI_CLK_FROM_ADG), + RSND_SSI_SET(0, 0, gic_iid(0x86), RSND_SSI_PLAY), + RSND_SSI_SET(0, 0, gic_iid(0x86), 0), + RSND_SSI_SET(3, 0, gic_iid(0x86), RSND_SSI_PLAY), + RSND_SSI_SET(4, 0, gic_iid(0x86), RSND_SSI_CLK_PIN_SHARE | RSND_SSI_CLK_FROM_ADG), +}; + +static struct rsnd_scu_platform_info rsnd_scu[9] = { + /* no member at this point */ +}; + +enum { + AK4554_34 = 0, + AK4643_56, + AK4554_78, + SOUND_MAX, +}; + +static int rsnd_codec_power(int id, int enable) +{ + static int sound_user[SOUND_MAX] = {0, 0, 0}; + int *usr = NULL; + u32 bit; + + switch (id) { + case 3: + case 4: + usr = sound_user + AK4554_34; + bit = (1 << 10); + break; + case 5: + case 6: + usr = sound_user + AK4643_56; + bit = (1 << 6); + break; + case 7: + case 8: + usr = sound_user + AK4554_78; + bit = (1 << 7); + break; + } + + if (!usr) + return -EIO; + + if (enable) { + if (*usr == 0) { + u32 val = ioread16(fpga + COMCTLR); + val &= ~bit; + iowrite16(val, fpga + COMCTLR); + } + + (*usr)++; + } else { + if (*usr == 0) + return 0; + + (*usr)--; + + if (*usr == 0) { + u32 val = ioread16(fpga + COMCTLR); + val |= bit; + iowrite16(val, fpga + COMCTLR); + } + } + + return 0; +} + +static int rsnd_start(int id) +{ + return rsnd_codec_power(id, 1); +} + +static int rsnd_stop(int id) +{ + return rsnd_codec_power(id, 0); +} + +static struct rcar_snd_info rsnd_info = { + .flags = RSND_GEN1, + .ssi_info = rsnd_ssi, + .ssi_info_nr = ARRAY_SIZE(rsnd_ssi), + .scu_info = rsnd_scu, + .scu_info_nr = ARRAY_SIZE(rsnd_scu), + .start = rsnd_start, + .stop = rsnd_stop, +}; + +static struct asoc_simple_card_info rsnd_card_info[] = { + /* SSI5, SSI6 */ + { + .name = "AK4643", + .card = "SSI56-AK4643", + .codec = "ak4642-codec.0-0012", + .platform = "rcar_sound", + .daifmt = SND_SOC_DAIFMT_LEFT_J, + .cpu_dai = { + .name = "rsnd-dai.0", + .fmt = SND_SOC_DAIFMT_CBS_CFS, + }, + .codec_dai = { + .name = "ak4642-hifi", + .fmt = SND_SOC_DAIFMT_CBM_CFM, + .sysclk = 11289600, + }, + }, + /* SSI3 */ + { + .name = "AK4554", + .card = "SSI3-AK4554(playback)", + .codec = "ak4554-adc-dac.0", + .platform = "rcar_sound", + .cpu_dai = { + .name = "rsnd-dai.1", + .fmt = SND_SOC_DAIFMT_CBM_CFM | + SND_SOC_DAIFMT_RIGHT_J, + }, + .codec_dai = { + .name = "ak4554-hifi", + }, + }, + /* SSI4 */ + { + .name = "AK4554", + .card = "SSI4-AK4554(capture)", + .codec = "ak4554-adc-dac.0", + .platform = "rcar_sound", + .cpu_dai = { + .name = "rsnd-dai.2", + .fmt = SND_SOC_DAIFMT_CBM_CFM | + SND_SOC_DAIFMT_LEFT_J, + }, + .codec_dai = { + .name = "ak4554-hifi", + }, + }, + /* SSI7 */ + { + .name = "AK4554", + .card = "SSI7-AK4554(playback)", + .codec = "ak4554-adc-dac.1", + .platform = "rcar_sound", + .cpu_dai = { + .name = "rsnd-dai.3", + .fmt = SND_SOC_DAIFMT_CBM_CFM | + SND_SOC_DAIFMT_RIGHT_J, + }, + .codec_dai = { + .name = "ak4554-hifi", + }, + }, + /* SSI8 */ + { + .name = "AK4554", + .card = "SSI8-AK4554(capture)", + .codec = "ak4554-adc-dac.1", + .platform = "rcar_sound", + .cpu_dai = { + .name = "rsnd-dai.4", + .fmt = SND_SOC_DAIFMT_CBM_CFM | + SND_SOC_DAIFMT_LEFT_J, + }, + .codec_dai = { + .name = "ak4554-hifi", + }, + } +}; + static const struct pinctrl_map bockw_pinctrl_map[] = { + /* AUDIO */ + PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778", + "audio_clk_a", "audio_clk"), + PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778", + "audio_clk_b", "audio_clk"), + PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778", + "ssi34_ctrl", "ssi"), + PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778", + "ssi3_data", "ssi"), + PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778", + "ssi4_data", "ssi"), + PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778", + "ssi5_ctrl", "ssi"), + PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778", + "ssi5_data", "ssi"), + PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778", + "ssi6_ctrl", "ssi"), + PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778", + "ssi6_data", "ssi"), + PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778", + "ssi78_ctrl", "ssi"), + PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778", + "ssi7_data", "ssi"), + PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778", + "ssi8_data", "ssi"), /* Ether */ PIN_MAP_MUX_GROUP_DEFAULT("r8a777x-ether", "pfc-r8a7778", "ether_rmii", "ether"), @@ -201,7 +542,7 @@ static const struct pinctrl_map bockw_pinctrl_map[] = { /* USB */ PIN_MAP_MUX_GROUP_DEFAULT("ehci-platform", "pfc-r8a7778", "usb0", "usb0"), - PIN_MAP_MUX_GROUP_DEFAULT("ehci-platform", "pfc-r8a7778", + PIN_MAP_MUX_GROUP_DEFAULT(USB1_DEVICE, "pfc-r8a7778", "usb1", "usb1"), /* SDHI0 */ PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778", @@ -224,22 +565,28 @@ static const struct pinctrl_map bockw_pinctrl_map[] = { "vin1_data8", "vin1"), }; -#define FPGA 0x18200000 -#define IRQ0MR 0x30 #define PFC 0xfffc0000 #define PUPR4 0x110 static void __init bockw_init(void) { void __iomem *base; + struct clk *clk; + int i; r8a7778_clock_init(); r8a7778_init_irq_extpin(1); r8a7778_add_standard_devices(); - r8a7778_add_ether_device(ðer_platform_data); - r8a7778_add_vin_device(0, &vin_platform_data); + + platform_device_register_resndata(&platform_bus, "r8a777x-ether", -1, + ether_resources, + ARRAY_SIZE(ether_resources), + ðer_platform_data, + sizeof(ether_platform_data)); + + platform_device_register_full(&vin0_info); /* VIN1 has a pin conflict with Ether */ if (!IS_ENABLED(CONFIG_SH_ETH)) - r8a7778_add_vin_device(1, &vin_platform_data); + platform_device_register_full(&vin1_info); platform_device_register_data(&platform_bus, "soc-camera-pdrv", 0, &iclink0_ml86v7667, sizeof(iclink0_ml86v7667)); @@ -269,8 +616,8 @@ static void __init bockw_init(void) /* for SMSC */ - base = ioremap_nocache(FPGA, SZ_1M); - if (base) { + fpga = ioremap_nocache(FPGA, SZ_1M); + if (fpga) { /* * CAUTION * @@ -278,10 +625,9 @@ static void __init bockw_init(void) * it should be cared in the future * Now, it is assuming IRQ0 was used only from SMSC. */ - u16 val = ioread16(base + IRQ0MR); + u16 val = ioread16(fpga + IRQ0MR); val &= ~(1 << 4); /* enable SMSC911x */ - iowrite16(val, base + IRQ0MR); - iounmap(base); + iowrite16(val, fpga + IRQ0MR); regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); @@ -308,6 +654,42 @@ static void __init bockw_init(void) sdhi0_resources, ARRAY_SIZE(sdhi0_resources), &sdhi0_info, sizeof(struct sh_mobile_sdhi_info)); } + + /* for Audio */ + clk = clk_get(NULL, "audio_clk_b"); + clk_set_rate(clk, 24576000); + clk_put(clk); + rsnd_codec_power(5, 1); /* enable ak4642 */ + + platform_device_register_simple( + "ak4554-adc-dac", 0, NULL, 0); + + platform_device_register_simple( + "ak4554-adc-dac", 1, NULL, 0); + + platform_device_register_resndata( + &platform_bus, "rcar_sound", -1, + rsnd_resources, ARRAY_SIZE(rsnd_resources), + &rsnd_info, sizeof(rsnd_info)); + + for (i = 0; i < ARRAY_SIZE(rsnd_card_info); i++) { + struct platform_device_info cardinfo = { + .parent = &platform_bus, + .name = "asoc-simple-card", + .id = i, + .data = &rsnd_card_info[i], + .size_data = sizeof(struct asoc_simple_card_info), + .dma_mask = ~0, + }; + + platform_device_register_full(&cardinfo); + } +} + +static void __init bockw_init_late(void) +{ + r8a7778_init_late(); + ADD_USB_FUNC_DEVICE_IF_POSSIBLE(); } static const char *bockw_boards_compat_dt[] __initdata = { @@ -320,5 +702,5 @@ DT_MACHINE_START(BOCKW_DT, "bockw") .init_irq = r8a7778_init_irq_dt, .init_machine = bockw_init, .dt_compat = bockw_boards_compat_dt, - .init_late = r8a7778_init_late, + .init_late = bockw_init_late, MACHINE_END diff --git a/arch/arm/mach-shmobile/board-genmai.c b/arch/arm/mach-shmobile/board-genmai.c new file mode 100644 index 00000000000..3e92e3c62d4 --- /dev/null +++ b/arch/arm/mach-shmobile/board-genmai.c @@ -0,0 +1,43 @@ +/* + * Genmai board support + * + * Copyright (C) 2013 Renesas Solutions Corp. + * Copyright (C) 2013 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <mach/common.h> +#include <mach/r7s72100.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +static void __init genmai_add_standard_devices(void) +{ + r7s72100_clock_init(); + r7s72100_add_dt_devices(); +} + +static const char * const genmai_boards_compat_dt[] __initconst = { + "renesas,genmai", + NULL, +}; + +DT_MACHINE_START(GENMAI_DT, "genmai") + .init_early = r7s72100_init_early, + .init_machine = genmai_add_standard_devices, + .dt_compat = genmai_boards_compat_dt, +MACHINE_END diff --git a/arch/arm/mach-shmobile/board-koelsch.c b/arch/arm/mach-shmobile/board-koelsch.c new file mode 100644 index 00000000000..ace1711a6cd --- /dev/null +++ b/arch/arm/mach-shmobile/board-koelsch.c @@ -0,0 +1,47 @@ +/* + * Koelsch board support + * + * Copyright (C) 2013 Renesas Electronics Corporation + * Copyright (C) 2013 Renesas Solutions Corp. + * Copyright (C) 2013 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <mach/common.h> +#include <mach/r8a7791.h> +#include <mach/rcar-gen2.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +static void __init koelsch_add_standard_devices(void) +{ + r8a7791_clock_init(); + r8a7791_add_standard_devices(); +} + +static const char * const koelsch_boards_compat_dt[] __initconst = { + "renesas,koelsch", + NULL, +}; + +DT_MACHINE_START(KOELSCH_DT, "koelsch") + .smp = smp_ops(r8a7791_smp_ops), + .init_early = r8a7791_init_early, + .init_machine = koelsch_add_standard_devices, + .init_time = rcar_gen2_timer_init, + .dt_compat = koelsch_boards_compat_dt, +MACHINE_END diff --git a/arch/arm/mach-shmobile/board-kzm9d-reference.c b/arch/arm/mach-shmobile/board-kzm9d-reference.c index 8f8bb2fab07..054d8d5c8fc 100644 --- a/arch/arm/mach-shmobile/board-kzm9d-reference.c +++ b/arch/arm/mach-shmobile/board-kzm9d-reference.c @@ -33,6 +33,7 @@ static void __init kzm9d_add_standard_devices(void) } static const char *kzm9d_boards_compat_dt[] __initdata = { + "renesas,kzm9d", "renesas,kzm9d-reference", NULL, }; diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c index f1994968d30..fe689b7fdc9 100644 --- a/arch/arm/mach-shmobile/board-kzm9g.c +++ b/arch/arm/mach-shmobile/board-kzm9g.c @@ -366,6 +366,7 @@ static struct resource sh_mmcif_resources[] = { static struct sh_mmcif_plat_data sh_mmcif_platdata = { .ocr = MMC_VDD_165_195, .caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE, + .ccs_unsupported = true, .slave_id_tx = SHDMA_SLAVE_MMCIF_TX, .slave_id_rx = SHDMA_SLAVE_MMCIF_RX, }; diff --git a/arch/arm/mach-shmobile/board-lager-reference.c b/arch/arm/mach-shmobile/board-lager-reference.c index 9c316a1b2e3..1a1a4a88863 100644 --- a/arch/arm/mach-shmobile/board-lager-reference.c +++ b/arch/arm/mach-shmobile/board-lager-reference.c @@ -38,8 +38,9 @@ static const char *lager_boards_compat_dt[] __initdata = { }; DT_MACHINE_START(LAGER_DT, "lager") - .init_early = r8a7790_init_delay, + .smp = smp_ops(r8a7790_smp_ops), + .init_early = r8a7790_init_early, + .init_time = rcar_gen2_timer_init, .init_machine = lager_add_standard_devices, - .init_time = r8a7790_timer_init, .dt_compat = lager_boards_compat_dt, MACHINE_END diff --git a/arch/arm/mach-shmobile/board-lager.c b/arch/arm/mach-shmobile/board-lager.c index 5930af8d434..a8d3ce646fb 100644 --- a/arch/arm/mach-shmobile/board-lager.c +++ b/arch/arm/mach-shmobile/board-lager.c @@ -28,6 +28,7 @@ #include <linux/mmc/sh_mmcif.h> #include <linux/pinctrl/machine.h> #include <linux/platform_data/gpio-rcar.h> +#include <linux/platform_data/rcar-du.h> #include <linux/platform_device.h> #include <linux/phy.h> #include <linux/regulator/fixed.h> @@ -39,6 +40,62 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> +/* DU */ +static struct rcar_du_encoder_data lager_du_encoders[] = { + { + .type = RCAR_DU_ENCODER_VGA, + .output = RCAR_DU_OUTPUT_DPAD0, + }, { + .type = RCAR_DU_ENCODER_NONE, + .output = RCAR_DU_OUTPUT_LVDS1, + .connector.lvds.panel = { + .width_mm = 210, + .height_mm = 158, + .mode = { + .clock = 65000, + .hdisplay = 1024, + .hsync_start = 1048, + .hsync_end = 1184, + .htotal = 1344, + .vdisplay = 768, + .vsync_start = 771, + .vsync_end = 777, + .vtotal = 806, + .flags = 0, + }, + }, + }, +}; + +static const struct rcar_du_platform_data lager_du_pdata __initconst = { + .encoders = lager_du_encoders, + .num_encoders = ARRAY_SIZE(lager_du_encoders), +}; + +static const struct resource du_resources[] __initconst = { + DEFINE_RES_MEM(0xfeb00000, 0x70000), + DEFINE_RES_MEM_NAMED(0xfeb90000, 0x1c, "lvds.0"), + DEFINE_RES_MEM_NAMED(0xfeb94000, 0x1c, "lvds.1"), + DEFINE_RES_IRQ(gic_spi(256)), + DEFINE_RES_IRQ(gic_spi(268)), + DEFINE_RES_IRQ(gic_spi(269)), +}; + +static void __init lager_add_du_device(void) +{ + struct platform_device_info info = { + .name = "rcar-du-r8a7790", + .id = -1, + .res = du_resources, + .num_res = ARRAY_SIZE(du_resources), + .data = &lager_du_pdata, + .size_data = sizeof(lager_du_pdata), + .dma_mask = DMA_BIT_MASK(32), + }; + + platform_device_register_full(&info); +} + /* LEDS */ static struct gpio_led lager_leds[] = { { @@ -56,7 +113,7 @@ static struct gpio_led lager_leds[] = { }, }; -static __initdata struct gpio_led_platform_data lager_leds_pdata = { +static const struct gpio_led_platform_data lager_leds_pdata __initconst = { .leds = lager_leds, .num_leds = ARRAY_SIZE(lager_leds), }; @@ -72,7 +129,7 @@ static struct gpio_keys_button gpio_buttons[] = { GPIO_KEY(KEY_1, RCAR_GP_PIN(1, 14), "SW2-pin1"), }; -static __initdata struct gpio_keys_platform_data lager_keys_pdata = { +static const struct gpio_keys_platform_data lager_keys_pdata __initconst = { .buttons = gpio_buttons, .nbuttons = ARRAY_SIZE(gpio_buttons), }; @@ -84,29 +141,38 @@ static struct regulator_consumer_supply fixed3v3_power_consumers[] = }; /* MMCIF */ -static struct sh_mmcif_plat_data mmcif1_pdata __initdata = { +static const struct sh_mmcif_plat_data mmcif1_pdata __initconst = { .caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE, + .clk_ctrl2_present = true, + .ccs_unsupported = true, }; -static struct resource mmcif1_resources[] __initdata = { +static const struct resource mmcif1_resources[] __initconst = { DEFINE_RES_MEM_NAMED(0xee220000, 0x80, "MMCIF1"), DEFINE_RES_IRQ(gic_spi(170)), }; /* Ether */ -static struct sh_eth_plat_data ether_pdata __initdata = { +static const struct sh_eth_plat_data ether_pdata __initconst = { .phy = 0x1, .edmac_endian = EDMAC_LITTLE_ENDIAN, .phy_interface = PHY_INTERFACE_MODE_RMII, .ether_link_active_low = 1, }; -static struct resource ether_resources[] __initdata = { +static const struct resource ether_resources[] __initconst = { DEFINE_RES_MEM(0xee700000, 0x400), DEFINE_RES_IRQ(gic_spi(162)), }; static const struct pinctrl_map lager_pinctrl_map[] = { + /* DU (CN10: ARGB0, CN13: LVDS) */ + PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7790", "pfc-r8a7790", + "du_rgb666", "du"), + PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7790", "pfc-r8a7790", + "du_sync_1", "du"), + PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7790", "pfc-r8a7790", + "du_clk_out_0", "du"), /* SCIF0 (CN19: DEBUG SERIAL0) */ PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.6", "pfc-r8a7790", "scif0_data", "scif0"), @@ -154,6 +220,8 @@ static void __init lager_add_standard_devices(void) ether_resources, ARRAY_SIZE(ether_resources), ðer_pdata, sizeof(ether_pdata)); + + lager_add_du_device(); } /* @@ -180,14 +248,15 @@ static void __init lager_init(void) phy_register_fixup_for_id("r8a7790-ether-ff:01", lager_ksz8041_fixup); } -static const char *lager_boards_compat_dt[] __initdata = { +static const char * const lager_boards_compat_dt[] __initconst = { "renesas,lager", NULL, }; DT_MACHINE_START(LAGER_DT, "lager") - .init_early = r8a7790_init_delay, - .init_time = r8a7790_timer_init, + .smp = smp_ops(r8a7790_smp_ops), + .init_early = r8a7790_init_early, + .init_time = rcar_gen2_timer_init, .init_machine = lager_init, .dt_compat = lager_boards_compat_dt, MACHINE_END diff --git a/arch/arm/mach-shmobile/board-marzen-reference.c b/arch/arm/mach-shmobile/board-marzen-reference.c index 3f4250a2d4e..2773936bf7d 100644 --- a/arch/arm/mach-shmobile/board-marzen-reference.c +++ b/arch/arm/mach-shmobile/board-marzen-reference.c @@ -28,6 +28,7 @@ static void __init marzen_init(void) { r8a7779_add_standard_devices_dt(); + r8a7779_init_irq_extpin_dt(1); /* IRQ1 as individual interrupt */ } static const char *marzen_boards_compat_dt[] __initdata = { diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c index 3f5044fda4e..da1352f5f71 100644 --- a/arch/arm/mach-shmobile/board-marzen.c +++ b/arch/arm/mach-shmobile/board-marzen.c @@ -30,6 +30,7 @@ #include <linux/dma-mapping.h> #include <linux/pinctrl/machine.h> #include <linux/platform_data/gpio-rcar.h> +#include <linux/platform_data/rcar-du.h> #include <linux/platform_data/usb-rcar-phy.h> #include <linux/regulator/fixed.h> #include <linux/regulator/machine.h> @@ -124,6 +125,8 @@ static struct resource sdhi0_resources[] = { }; static struct sh_mobile_sdhi_info sdhi0_platform_data = { + .dma_slave_tx = HPBDMA_SLAVE_SDHI0_TX, + .dma_slave_rx = HPBDMA_SLAVE_SDHI0_RX, .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_HAS_IDLE_WAIT, .tmio_caps = MMC_CAP_SD_HIGHSPEED, }; @@ -169,6 +172,63 @@ static struct platform_device hspi_device = { .num_resources = ARRAY_SIZE(hspi_resources), }; +/* + * DU + * + * The panel only specifies the [hv]display and [hv]total values. The position + * and width of the sync pulses don't matter, they're copied from VESA timings. + */ +static struct rcar_du_encoder_data du_encoders[] = { + { + .type = RCAR_DU_ENCODER_VGA, + .output = RCAR_DU_OUTPUT_DPAD0, + }, { + .type = RCAR_DU_ENCODER_LVDS, + .output = RCAR_DU_OUTPUT_DPAD1, + .connector.lvds.panel = { + .width_mm = 210, + .height_mm = 158, + .mode = { + .clock = 65000, + .hdisplay = 1024, + .hsync_start = 1048, + .hsync_end = 1184, + .htotal = 1344, + .vdisplay = 768, + .vsync_start = 771, + .vsync_end = 777, + .vtotal = 806, + .flags = 0, + }, + }, + }, +}; + +static const struct rcar_du_platform_data du_pdata __initconst = { + .encoders = du_encoders, + .num_encoders = ARRAY_SIZE(du_encoders), +}; + +static const struct resource du_resources[] __initconst = { + DEFINE_RES_MEM(0xfff80000, 0x40000), + DEFINE_RES_IRQ(gic_iid(0x3f)), +}; + +static void __init marzen_add_du_device(void) +{ + struct platform_device_info info = { + .name = "rcar-du-r8a7779", + .id = -1, + .res = du_resources, + .num_res = ARRAY_SIZE(du_resources), + .data = &du_pdata, + .size_data = sizeof(du_pdata), + .dma_mask = DMA_BIT_MASK(32), + }; + + platform_device_register_full(&info); +} + /* LEDS */ static struct gpio_led marzen_leds[] = { { @@ -237,6 +297,19 @@ static struct platform_device *marzen_devices[] __initdata = { }; static const struct pinctrl_map marzen_pinctrl_map[] = { + /* DU (CN10: ARGB0, CN13: LVDS) */ + PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7779", "pfc-r8a7779", + "du0_rgb888", "du0"), + PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7779", "pfc-r8a7779", + "du0_sync_1", "du0"), + PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7779", "pfc-r8a7779", + "du0_clk_out_0", "du0"), + PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7779", "pfc-r8a7779", + "du1_rgb666", "du1"), + PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7779", "pfc-r8a7779", + "du1_sync_1", "du1"), + PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7779", "pfc-r8a7779", + "du1_clk_out", "du1"), /* HSPI0 */ PIN_MAP_MUX_GROUP_DEFAULT("sh-hspi.0", "pfc-r8a7779", "hspi0", "hspi0"), @@ -297,6 +370,7 @@ static void __init marzen_init(void) r8a7779_add_vin_device(1, &vin_platform_data); r8a7779_add_vin_device(3, &vin_platform_data); platform_add_devices(marzen_devices, ARRAY_SIZE(marzen_devices)); + marzen_add_du_device(); } static const char *marzen_boards_compat_dt[] __initdata = { diff --git a/arch/arm/mach-shmobile/clock-r7s72100.c b/arch/arm/mach-shmobile/clock-r7s72100.c new file mode 100644 index 00000000000..4aba20ca127 --- /dev/null +++ b/arch/arm/mach-shmobile/clock-r7s72100.c @@ -0,0 +1,202 @@ +/* + * r7a72100 clock framework support + * + * Copyright (C) 2013 Renesas Solutions Corp. + * Copyright (C) 2012 Phil Edworthy + * Copyright (C) 2011 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/io.h> +#include <linux/sh_clk.h> +#include <linux/clkdev.h> +#include <mach/common.h> +#include <mach/r7s72100.h> + +/* registers */ +#define FRQCR 0xfcfe0010 +#define FRQCR2 0xfcfe0014 +#define STBCR3 0xfcfe0420 +#define STBCR4 0xfcfe0424 + +#define PLL_RATE 30 + +static struct clk_mapping cpg_mapping = { + .phys = 0xfcfe0000, + .len = 0x1000, +}; + +/* Fixed 32 KHz root clock for RTC */ +static struct clk r_clk = { + .rate = 32768, +}; + +/* + * Default rate for the root input clock, reset this with clk_set_rate() + * from the platform code. + */ +static struct clk extal_clk = { + .rate = 13330000, + .mapping = &cpg_mapping, +}; + +static unsigned long pll_recalc(struct clk *clk) +{ + return clk->parent->rate * PLL_RATE; +} + +static struct sh_clk_ops pll_clk_ops = { + .recalc = pll_recalc, +}; + +static struct clk pll_clk = { + .ops = &pll_clk_ops, + .parent = &extal_clk, + .flags = CLK_ENABLE_ON_INIT, +}; + +static unsigned long bus_recalc(struct clk *clk) +{ + return clk->parent->rate * 2 / 3; +} + +static struct sh_clk_ops bus_clk_ops = { + .recalc = bus_recalc, +}; + +static struct clk bus_clk = { + .ops = &bus_clk_ops, + .parent = &pll_clk, + .flags = CLK_ENABLE_ON_INIT, +}; + +static unsigned long peripheral0_recalc(struct clk *clk) +{ + return clk->parent->rate / 12; +} + +static struct sh_clk_ops peripheral0_clk_ops = { + .recalc = peripheral0_recalc, +}; + +static struct clk peripheral0_clk = { + .ops = &peripheral0_clk_ops, + .parent = &pll_clk, + .flags = CLK_ENABLE_ON_INIT, +}; + +static unsigned long peripheral1_recalc(struct clk *clk) +{ + return clk->parent->rate / 6; +} + +static struct sh_clk_ops peripheral1_clk_ops = { + .recalc = peripheral1_recalc, +}; + +static struct clk peripheral1_clk = { + .ops = &peripheral1_clk_ops, + .parent = &pll_clk, + .flags = CLK_ENABLE_ON_INIT, +}; + +struct clk *main_clks[] = { + &r_clk, + &extal_clk, + &pll_clk, + &bus_clk, + &peripheral0_clk, + &peripheral1_clk, +}; + +static int div2[] = { 1, 3, 0, 3 }; /* 1, 2/3, reserve, 1/3 */ +static int multipliers[] = { 1, 2, 1, 1 }; + +static struct clk_div_mult_table div4_div_mult_table = { + .divisors = div2, + .nr_divisors = ARRAY_SIZE(div2), + .multipliers = multipliers, + .nr_multipliers = ARRAY_SIZE(multipliers), +}; + +static struct clk_div4_table div4_table = { + .div_mult_table = &div4_div_mult_table, +}; + +enum { DIV4_I, + DIV4_NR }; + +#define DIV4(_reg, _bit, _mask, _flags) \ + SH_CLK_DIV4(&pll_clk, _reg, _bit, _mask, _flags) + +/* The mask field specifies the div2 entries that are valid */ +struct clk div4_clks[DIV4_NR] = { + [DIV4_I] = DIV4(FRQCR, 8, 0xB, CLK_ENABLE_REG_16BIT + | CLK_ENABLE_ON_INIT), +}; + +enum { MSTP47, MSTP46, MSTP45, MSTP44, MSTP43, MSTP42, MSTP41, MSTP40, + MSTP33, MSTP_NR }; + +static struct clk mstp_clks[MSTP_NR] = { + [MSTP47] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 7, 0), /* SCIF0 */ + [MSTP46] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 6, 0), /* SCIF1 */ + [MSTP45] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 5, 0), /* SCIF2 */ + [MSTP44] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 4, 0), /* SCIF3 */ + [MSTP43] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 3, 0), /* SCIF4 */ + [MSTP42] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 2, 0), /* SCIF5 */ + [MSTP41] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 1, 0), /* SCIF6 */ + [MSTP40] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 0, 0), /* SCIF7 */ + [MSTP33] = SH_CLK_MSTP8(&peripheral0_clk, STBCR3, 3, 0), /* MTU2 */ +}; + +static struct clk_lookup lookups[] = { + /* main clocks */ + CLKDEV_CON_ID("rclk", &r_clk), + CLKDEV_CON_ID("extal", &extal_clk), + CLKDEV_CON_ID("pll_clk", &pll_clk), + CLKDEV_CON_ID("peripheral_clk", &peripheral1_clk), + + /* DIV4 clocks */ + CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]), + + /* MSTP clocks */ + CLKDEV_ICK_ID("sci_fck", "sh-sci.0", &mstp_clks[MSTP47]), + CLKDEV_ICK_ID("sci_fck", "sh-sci.1", &mstp_clks[MSTP46]), + CLKDEV_ICK_ID("sci_fck", "sh-sci.2", &mstp_clks[MSTP45]), + CLKDEV_ICK_ID("sci_fck", "sh-sci.3", &mstp_clks[MSTP44]), + CLKDEV_ICK_ID("sci_fck", "sh-sci.4", &mstp_clks[MSTP43]), + CLKDEV_ICK_ID("sci_fck", "sh-sci.5", &mstp_clks[MSTP42]), + CLKDEV_ICK_ID("sci_fck", "sh-sci.6", &mstp_clks[MSTP41]), + CLKDEV_ICK_ID("sci_fck", "sh-sci.7", &mstp_clks[MSTP40]), +}; + +void __init r7s72100_clock_init(void) +{ + int k, ret = 0; + + for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++) + ret = clk_register(main_clks[k]); + + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); + + if (!ret) + ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table); + + if (!ret) + ret = sh_clk_mstp_register(mstp_clks, MSTP_NR); + + if (!ret) + shmobile_clk_init(); + else + panic("failed to setup rza1 clocks\n"); +} diff --git a/arch/arm/mach-shmobile/clock-r8a73a4.c b/arch/arm/mach-shmobile/clock-r8a73a4.c index 5bd2e851e3c..571409b611d 100644 --- a/arch/arm/mach-shmobile/clock-r8a73a4.c +++ b/arch/arm/mach-shmobile/clock-r8a73a4.c @@ -504,7 +504,7 @@ static struct clk div6_clks[DIV6_NR] = { /* MSTP */ enum { - MSTP217, MSTP216, MSTP207, MSTP206, MSTP204, MSTP203, + MSTP218, MSTP217, MSTP216, MSTP207, MSTP206, MSTP204, MSTP203, MSTP329, MSTP323, MSTP318, MSTP317, MSTP316, MSTP315, MSTP314, MSTP313, MSTP312, MSTP305, MSTP300, MSTP411, MSTP410, MSTP409, @@ -519,6 +519,7 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP207] = SH_CLK_MSTP32(&div6_clks[DIV6_MP], SMSTPCR2, 7, 0), /* SCIFB1 */ [MSTP216] = SH_CLK_MSTP32(&div6_clks[DIV6_MP], SMSTPCR2, 16, 0), /* SCIFB2 */ [MSTP217] = SH_CLK_MSTP32(&div6_clks[DIV6_MP], SMSTPCR2, 17, 0), /* SCIFB3 */ + [MSTP218] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR2, 18, 0), /* DMAC */ [MSTP300] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR3, 0, 0), /* IIC2 */ [MSTP305] = SH_CLK_MSTP32(&div6_clks[DIV6_MMC1],SMSTPCR3, 5, 0), /* MMCIF1 */ [MSTP312] = SH_CLK_MSTP32(&div6_clks[DIV6_SDHI2],SMSTPCR3, 12, 0), /* SDHI2 */ @@ -578,6 +579,8 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP207]), CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP216]), CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP217]), + CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP218]), + CLKDEV_DEV_ID("e6700020.dma-controller", &mstp_clks[MSTP218]), CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]), CLKDEV_DEV_ID("e6520000.i2c", &mstp_clks[MSTP300]), CLKDEV_DEV_ID("sh_mmcif.1", &mstp_clks[MSTP305]), diff --git a/arch/arm/mach-shmobile/clock-r8a7778.c b/arch/arm/mach-shmobile/clock-r8a7778.c index c4bf2d8fb11..fb6af83858e 100644 --- a/arch/arm/mach-shmobile/clock-r8a7778.c +++ b/arch/arm/mach-shmobile/clock-r8a7778.c @@ -69,6 +69,15 @@ static struct clk extal_clk = { .mapping = &cpg_mapping, }; +static struct clk audio_clk_a = { +}; + +static struct clk audio_clk_b = { +}; + +static struct clk audio_clk_c = { +}; + /* * clock ratio of these clock will be updated * on r8a7778_clock_init() @@ -100,18 +109,23 @@ static struct clk *main_clks[] = { &p_clk, &g_clk, &z_clk, + &audio_clk_a, + &audio_clk_b, + &audio_clk_c, }; enum { MSTP331, MSTP323, MSTP322, MSTP321, + MSTP311, MSTP310, + MSTP309, MSTP308, MSTP307, MSTP114, MSTP110, MSTP109, MSTP100, MSTP030, MSTP029, MSTP028, MSTP027, MSTP026, MSTP025, MSTP024, MSTP023, MSTP022, MSTP021, - MSTP016, MSTP015, - MSTP007, + MSTP016, MSTP015, MSTP012, MSTP011, MSTP010, + MSTP009, MSTP008, MSTP007, MSTP_NR }; static struct clk mstp_clks[MSTP_NR] = { @@ -119,6 +133,11 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP323] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 23, 0), /* SDHI0 */ [MSTP322] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 22, 0), /* SDHI1 */ [MSTP321] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 21, 0), /* SDHI2 */ + [MSTP311] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 11, 0), /* SSI4 */ + [MSTP310] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 10, 0), /* SSI5 */ + [MSTP309] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 9, 0), /* SSI6 */ + [MSTP308] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 8, 0), /* SSI7 */ + [MSTP307] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 7, 0), /* SSI8 */ [MSTP114] = SH_CLK_MSTP32(&p_clk, MSTPCR1, 14, 0), /* Ether */ [MSTP110] = SH_CLK_MSTP32(&s_clk, MSTPCR1, 10, 0), /* VIN0 */ [MSTP109] = SH_CLK_MSTP32(&s_clk, MSTPCR1, 9, 0), /* VIN1 */ @@ -135,11 +154,20 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP021] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 21, 0), /* SCIF5 */ [MSTP016] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 16, 0), /* TMU0 */ [MSTP015] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 15, 0), /* TMU1 */ + [MSTP012] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 12, 0), /* SSI0 */ + [MSTP011] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 11, 0), /* SSI1 */ + [MSTP010] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 10, 0), /* SSI2 */ + [MSTP009] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 9, 0), /* SSI3 */ + [MSTP008] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 8, 0), /* SRU */ [MSTP007] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 7, 0), /* HSPI */ }; static struct clk_lookup lookups[] = { /* main */ + CLKDEV_CON_ID("audio_clk_a", &audio_clk_a), + CLKDEV_CON_ID("audio_clk_b", &audio_clk_b), + CLKDEV_CON_ID("audio_clk_c", &audio_clk_c), + CLKDEV_CON_ID("audio_clk_internal", &s1_clk), CLKDEV_CON_ID("shyway_clk", &s_clk), CLKDEV_CON_ID("peripheral_clk", &p_clk), @@ -153,6 +181,7 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("r8a7778-vin.1", &mstp_clks[MSTP109]), /* VIN1 */ CLKDEV_DEV_ID("ehci-platform", &mstp_clks[MSTP100]), /* USB EHCI port0/1 */ CLKDEV_DEV_ID("ohci-platform", &mstp_clks[MSTP100]), /* USB OHCI port0/1 */ + CLKDEV_DEV_ID("renesas_usbhs", &mstp_clks[MSTP100]), /* USB FUNC */ CLKDEV_DEV_ID("i2c-rcar.0", &mstp_clks[MSTP030]), /* I2C0 */ CLKDEV_DEV_ID("i2c-rcar.1", &mstp_clks[MSTP029]), /* I2C1 */ CLKDEV_DEV_ID("i2c-rcar.2", &mstp_clks[MSTP028]), /* I2C2 */ @@ -168,6 +197,17 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh-hspi.0", &mstp_clks[MSTP007]), /* HSPI0 */ CLKDEV_DEV_ID("sh-hspi.1", &mstp_clks[MSTP007]), /* HSPI1 */ CLKDEV_DEV_ID("sh-hspi.2", &mstp_clks[MSTP007]), /* HSPI2 */ + CLKDEV_DEV_ID("rcar_sound", &mstp_clks[MSTP008]), /* SRU */ + + CLKDEV_ICK_ID("ssi.0", "rcar_sound", &mstp_clks[MSTP012]), + CLKDEV_ICK_ID("ssi.1", "rcar_sound", &mstp_clks[MSTP011]), + CLKDEV_ICK_ID("ssi.2", "rcar_sound", &mstp_clks[MSTP010]), + CLKDEV_ICK_ID("ssi.3", "rcar_sound", &mstp_clks[MSTP009]), + CLKDEV_ICK_ID("ssi.4", "rcar_sound", &mstp_clks[MSTP311]), + CLKDEV_ICK_ID("ssi.5", "rcar_sound", &mstp_clks[MSTP310]), + CLKDEV_ICK_ID("ssi.6", "rcar_sound", &mstp_clks[MSTP309]), + CLKDEV_ICK_ID("ssi.7", "rcar_sound", &mstp_clks[MSTP308]), + CLKDEV_ICK_ID("ssi.8", "rcar_sound", &mstp_clks[MSTP307]), }; void __init r8a7778_clock_init(void) diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c index bd6ad922eb7..1f7080fab0a 100644 --- a/arch/arm/mach-shmobile/clock-r8a7779.c +++ b/arch/arm/mach-shmobile/clock-r8a7779.c @@ -200,7 +200,7 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP322]), /* SDHI1 */ CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP321]), /* SDHI2 */ CLKDEV_DEV_ID("sh_mobile_sdhi.3", &mstp_clks[MSTP320]), /* SDHI3 */ - CLKDEV_DEV_ID("rcar-du.0", &mstp_clks[MSTP103]), /* DU */ + CLKDEV_DEV_ID("rcar-du-r8a7779", &mstp_clks[MSTP103]), /* DU */ }; void __init r8a7779_clock_init(void) diff --git a/arch/arm/mach-shmobile/clock-r8a7790.c b/arch/arm/mach-shmobile/clock-r8a7790.c index fc36d3db0b4..a64f965c7da 100644 --- a/arch/arm/mach-shmobile/clock-r8a7790.c +++ b/arch/arm/mach-shmobile/clock-r8a7790.c @@ -52,6 +52,7 @@ #define SMSTPCR5 0xe6150144 #define SMSTPCR7 0xe615014c #define SMSTPCR8 0xe6150990 +#define SMSTPCR9 0xe6150994 #define SDCKCR 0xE6150074 #define SD2CKCR 0xE6150078 @@ -181,8 +182,9 @@ static struct clk div6_clks[DIV6_NR] = { /* MSTP */ enum { + MSTP931, MSTP930, MSTP929, MSTP928, MSTP813, - MSTP721, MSTP720, + MSTP726, MSTP725, MSTP724, MSTP723, MSTP722, MSTP721, MSTP720, MSTP717, MSTP716, MSTP522, MSTP315, MSTP314, MSTP313, MSTP312, MSTP311, MSTP305, MSTP304, @@ -192,7 +194,16 @@ enum { }; static struct clk mstp_clks[MSTP_NR] = { + [MSTP931] = SH_CLK_MSTP32(&hp_clk, SMSTPCR9, 31, 0), /* I2C0 */ + [MSTP930] = SH_CLK_MSTP32(&hp_clk, SMSTPCR9, 30, 0), /* I2C1 */ + [MSTP929] = SH_CLK_MSTP32(&hp_clk, SMSTPCR9, 29, 0), /* I2C2 */ + [MSTP928] = SH_CLK_MSTP32(&hp_clk, SMSTPCR9, 28, 0), /* I2C3 */ [MSTP813] = SH_CLK_MSTP32(&p_clk, SMSTPCR8, 13, 0), /* Ether */ + [MSTP726] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 26, 0), /* LVDS0 */ + [MSTP725] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 25, 0), /* LVDS1 */ + [MSTP724] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 24, 0), /* DU0 */ + [MSTP723] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 23, 0), /* DU1 */ + [MSTP722] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 22, 0), /* DU2 */ [MSTP721] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 21, 0), /* SCIF0 */ [MSTP720] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 20, 0), /* SCIF1 */ [MSTP717] = SH_CLK_MSTP32(&zs_clk, SMSTPCR7, 17, 0), /* HSCIF0 */ @@ -251,6 +262,11 @@ static struct clk_lookup lookups[] = { CLKDEV_CON_ID("ssprs", &div6_clks[DIV6_SSPRS]), /* MSTP */ + CLKDEV_ICK_ID("lvds.0", "rcar-du-r8a7790", &mstp_clks[MSTP726]), + CLKDEV_ICK_ID("lvds.1", "rcar-du-r8a7790", &mstp_clks[MSTP725]), + CLKDEV_ICK_ID("du.0", "rcar-du-r8a7790", &mstp_clks[MSTP724]), + CLKDEV_ICK_ID("du.1", "rcar-du-r8a7790", &mstp_clks[MSTP723]), + CLKDEV_ICK_ID("du.2", "rcar-du-r8a7790", &mstp_clks[MSTP722]), CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]), CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP206]), @@ -261,6 +277,10 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP720]), CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP717]), CLKDEV_DEV_ID("sh-sci.9", &mstp_clks[MSTP716]), + CLKDEV_DEV_ID("e6508000.i2c", &mstp_clks[MSTP931]), + CLKDEV_DEV_ID("e6518000.i2c", &mstp_clks[MSTP930]), + CLKDEV_DEV_ID("e6530000.i2c", &mstp_clks[MSTP929]), + CLKDEV_DEV_ID("e6540000.i2c", &mstp_clks[MSTP928]), CLKDEV_DEV_ID("r8a7790-ether", &mstp_clks[MSTP813]), CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]), CLKDEV_DEV_ID("ee200000.mmcif", &mstp_clks[MSTP315]), @@ -290,7 +310,7 @@ static struct clk_lookup lookups[] = { void __init r8a7790_clock_init(void) { - u32 mode = r8a7790_read_mode_pins(); + u32 mode = rcar_gen2_read_mode_pins(); int k, ret = 0; switch (mode & (MD(14) | MD(13))) { diff --git a/arch/arm/mach-shmobile/clock-r8a7791.c b/arch/arm/mach-shmobile/clock-r8a7791.c new file mode 100644 index 00000000000..c9a26f16ce5 --- /dev/null +++ b/arch/arm/mach-shmobile/clock-r8a7791.c @@ -0,0 +1,237 @@ +/* + * r8a7791 clock framework support + * + * Copyright (C) 2013 Renesas Electronics Corporation + * Copyright (C) 2013 Renesas Solutions Corp. + * Copyright (C) 2013 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include <linux/init.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/sh_clk.h> +#include <linux/clkdev.h> +#include <mach/clock.h> +#include <mach/common.h> + +/* + * MD EXTAL PLL0 PLL1 PLL3 + * 14 13 19 (MHz) *1 *1 + *--------------------------------------------------- + * 0 0 0 15 x 1 x172/2 x208/2 x106 + * 0 0 1 15 x 1 x172/2 x208/2 x88 + * 0 1 0 20 x 1 x130/2 x156/2 x80 + * 0 1 1 20 x 1 x130/2 x156/2 x66 + * 1 0 0 26 / 2 x200/2 x240/2 x122 + * 1 0 1 26 / 2 x200/2 x240/2 x102 + * 1 1 0 30 / 2 x172/2 x208/2 x106 + * 1 1 1 30 / 2 x172/2 x208/2 x88 + * + * *1 : Table 7.6 indicates VCO ouput (PLLx = VCO/2) + * see "p1 / 2" on R8A7791_CLOCK_ROOT() below + */ + +#define MD(nr) (1 << nr) + +#define CPG_BASE 0xe6150000 +#define CPG_LEN 0x1000 + +#define SMSTPCR0 0xE6150130 +#define SMSTPCR1 0xE6150134 +#define SMSTPCR2 0xe6150138 +#define SMSTPCR3 0xE615013C +#define SMSTPCR5 0xE6150144 +#define SMSTPCR7 0xe615014c +#define SMSTPCR8 0xE6150990 +#define SMSTPCR9 0xE6150994 +#define SMSTPCR10 0xE6150998 +#define SMSTPCR11 0xE615099C + +#define MODEMR 0xE6160060 +#define SDCKCR 0xE6150074 +#define SD2CKCR 0xE6150078 +#define SD3CKCR 0xE615007C +#define MMC0CKCR 0xE6150240 +#define MMC1CKCR 0xE6150244 +#define SSPCKCR 0xE6150248 +#define SSPRSCKCR 0xE615024C + +static struct clk_mapping cpg_mapping = { + .phys = CPG_BASE, + .len = CPG_LEN, +}; + +static struct clk extal_clk = { + /* .rate will be updated on r8a7791_clock_init() */ + .mapping = &cpg_mapping, +}; + +static struct sh_clk_ops followparent_clk_ops = { + .recalc = followparent_recalc, +}; + +static struct clk main_clk = { + /* .parent will be set r8a73a4_clock_init */ + .ops = &followparent_clk_ops, +}; + +/* + * clock ratio of these clock will be updated + * on r8a7791_clock_init() + */ +SH_FIXED_RATIO_CLK_SET(pll1_clk, main_clk, 1, 1); +SH_FIXED_RATIO_CLK_SET(pll3_clk, main_clk, 1, 1); + +/* fixed ratio clock */ +SH_FIXED_RATIO_CLK_SET(extal_div2_clk, extal_clk, 1, 2); +SH_FIXED_RATIO_CLK_SET(cp_clk, extal_clk, 1, 2); + +SH_FIXED_RATIO_CLK_SET(pll1_div2_clk, pll1_clk, 1, 2); +SH_FIXED_RATIO_CLK_SET(hp_clk, pll1_clk, 1, 12); +SH_FIXED_RATIO_CLK_SET(p_clk, pll1_clk, 1, 24); +SH_FIXED_RATIO_CLK_SET(rclk_clk, pll1_clk, 1, (48 * 1024)); +SH_FIXED_RATIO_CLK_SET(mp_clk, pll1_div2_clk, 1, 15); + +static struct clk *main_clks[] = { + &extal_clk, + &extal_div2_clk, + &main_clk, + &pll1_clk, + &pll1_div2_clk, + &pll3_clk, + &hp_clk, + &p_clk, + &rclk_clk, + &mp_clk, + &cp_clk, +}; + +/* MSTP */ +enum { + MSTP721, MSTP720, + MSTP719, MSTP718, MSTP715, MSTP714, + MSTP216, MSTP207, MSTP206, + MSTP204, MSTP203, MSTP202, MSTP1105, MSTP1106, MSTP1107, + MSTP124, + MSTP_NR +}; + +static struct clk mstp_clks[MSTP_NR] = { + [MSTP721] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 21, 0), /* SCIF0 */ + [MSTP720] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 20, 0), /* SCIF1 */ + [MSTP719] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 19, 0), /* SCIF2 */ + [MSTP718] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 18, 0), /* SCIF3 */ + [MSTP715] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 15, 0), /* SCIF4 */ + [MSTP714] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 14, 0), /* SCIF5 */ + [MSTP216] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 16, 0), /* SCIFB2 */ + [MSTP207] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 7, 0), /* SCIFB1 */ + [MSTP206] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 6, 0), /* SCIFB0 */ + [MSTP204] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 4, 0), /* SCIFA0 */ + [MSTP203] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 3, 0), /* SCIFA1 */ + [MSTP202] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 2, 0), /* SCIFA2 */ + [MSTP1105] = SH_CLK_MSTP32(&mp_clk, SMSTPCR11, 5, 0), /* SCIFA3 */ + [MSTP1106] = SH_CLK_MSTP32(&mp_clk, SMSTPCR11, 6, 0), /* SCIFA4 */ + [MSTP1107] = SH_CLK_MSTP32(&mp_clk, SMSTPCR11, 7, 0), /* SCIFA5 */ + [MSTP124] = SH_CLK_MSTP32(&rclk_clk, SMSTPCR1, 24, 0), /* CMT0 */ +}; + +static struct clk_lookup lookups[] = { + + /* main clocks */ + CLKDEV_CON_ID("extal", &extal_clk), + CLKDEV_CON_ID("extal_div2", &extal_div2_clk), + CLKDEV_CON_ID("main", &main_clk), + CLKDEV_CON_ID("pll1", &pll1_clk), + CLKDEV_CON_ID("pll1_div2", &pll1_div2_clk), + CLKDEV_CON_ID("pll3", &pll3_clk), + CLKDEV_CON_ID("hp", &hp_clk), + CLKDEV_CON_ID("p", &p_clk), + CLKDEV_CON_ID("rclk", &rclk_clk), + CLKDEV_CON_ID("mp", &mp_clk), + CLKDEV_CON_ID("cp", &cp_clk), + CLKDEV_CON_ID("peripheral_clk", &hp_clk), + + /* MSTP */ + CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */ + CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]), /* SCIFA1 */ + CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP206]), /* SCIFB0 */ + CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP207]), /* SCIFB1 */ + CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP216]), /* SCIFB2 */ + CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP202]), /* SCIFA2 */ + CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP721]), /* SCIF0 */ + CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP720]), /* SCIF1 */ + CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP719]), /* SCIF2 */ + CLKDEV_DEV_ID("sh-sci.9", &mstp_clks[MSTP718]), /* SCIF3 */ + CLKDEV_DEV_ID("sh-sci.10", &mstp_clks[MSTP715]), /* SCIF4 */ + CLKDEV_DEV_ID("sh-sci.11", &mstp_clks[MSTP714]), /* SCIF5 */ + CLKDEV_DEV_ID("sh-sci.12", &mstp_clks[MSTP1105]), /* SCIFA3 */ + CLKDEV_DEV_ID("sh-sci.13", &mstp_clks[MSTP1106]), /* SCIFA4 */ + CLKDEV_DEV_ID("sh-sci.14", &mstp_clks[MSTP1107]), /* SCIFA5 */ + CLKDEV_DEV_ID("sh_cmt.0", &mstp_clks[MSTP124]), +}; + +#define R8A7791_CLOCK_ROOT(e, m, p0, p1, p30, p31) \ + extal_clk.rate = e * 1000 * 1000; \ + main_clk.parent = m; \ + SH_CLK_SET_RATIO(&pll1_clk_ratio, p1 / 2, 1); \ + if (mode & MD(19)) \ + SH_CLK_SET_RATIO(&pll3_clk_ratio, p31, 1); \ + else \ + SH_CLK_SET_RATIO(&pll3_clk_ratio, p30, 1) + + +void __init r8a7791_clock_init(void) +{ + void __iomem *modemr = ioremap_nocache(MODEMR, PAGE_SIZE); + u32 mode; + int k, ret = 0; + + BUG_ON(!modemr); + mode = ioread32(modemr); + iounmap(modemr); + + switch (mode & (MD(14) | MD(13))) { + case 0: + R8A7791_CLOCK_ROOT(15, &extal_clk, 172, 208, 106, 88); + break; + case MD(13): + R8A7791_CLOCK_ROOT(20, &extal_clk, 130, 156, 80, 66); + break; + case MD(14): + R8A7791_CLOCK_ROOT(26, &extal_div2_clk, 200, 240, 122, 102); + break; + case MD(13) | MD(14): + R8A7791_CLOCK_ROOT(30, &extal_div2_clk, 172, 208, 106, 88); + break; + } + + for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++) + ret = clk_register(main_clks[k]); + + if (!ret) + ret = sh_clk_mstp_register(mstp_clks, MSTP_NR); + + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); + + if (!ret) + shmobile_clk_init(); + else + goto epanic; + + return; + +epanic: + panic("failed to setup r8a7791 clocks\n"); +} diff --git a/arch/arm/mach-shmobile/headsmp.S b/arch/arm/mach-shmobile/headsmp.S index f93751caf5c..e5be5c88644 100644 --- a/arch/arm/mach-shmobile/headsmp.S +++ b/arch/arm/mach-shmobile/headsmp.S @@ -40,6 +40,9 @@ shmobile_boot_fn: .globl shmobile_boot_arg shmobile_boot_arg: 2: .space 4 + .globl shmobile_boot_size +shmobile_boot_size: + .long . - shmobile_boot_vector /* * Per-CPU SMP boot function/argument selection code based on MPIDR diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h index 7b938681e75..e31980590eb 100644 --- a/arch/arm/mach-shmobile/include/mach/common.h +++ b/arch/arm/mach-shmobile/include/mach/common.h @@ -9,16 +9,23 @@ extern void shmobile_setup_console(void); extern void shmobile_boot_vector(void); extern unsigned long shmobile_boot_fn; extern unsigned long shmobile_boot_arg; +extern unsigned long shmobile_boot_size; extern void shmobile_smp_boot(void); extern void shmobile_smp_sleep(void); extern void shmobile_smp_hook(unsigned int cpu, unsigned long fn, unsigned long arg); +extern int shmobile_smp_cpu_disable(unsigned int cpu); +extern void shmobile_invalidate_start(void); extern void shmobile_boot_scu(void); extern void shmobile_smp_scu_prepare_cpus(unsigned int max_cpus); -extern int shmobile_smp_scu_boot_secondary(unsigned int cpu, - struct task_struct *idle); extern void shmobile_smp_scu_cpu_die(unsigned int cpu); extern int shmobile_smp_scu_cpu_kill(unsigned int cpu); +extern void shmobile_smp_apmu_prepare_cpus(unsigned int max_cpus); +extern int shmobile_smp_apmu_boot_secondary(unsigned int cpu, + struct task_struct *idle); +extern void shmobile_smp_apmu_cpu_die(unsigned int cpu); +extern int shmobile_smp_apmu_cpu_kill(unsigned int cpu); +extern void shmobile_invalidate_start(void); struct clk; extern int shmobile_clk_init(void); extern void shmobile_handle_irq_intc(struct pt_regs *); @@ -39,7 +46,6 @@ static inline int shmobile_cpuidle_init(void) { return 0; } #endif extern void __iomem *shmobile_scu_base; -extern void shmobile_smp_init_cpus(unsigned int ncores); static inline void __init shmobile_init_late(void) { diff --git a/arch/arm/mach-shmobile/include/mach/r7s72100.h b/arch/arm/mach-shmobile/include/mach/r7s72100.h new file mode 100644 index 00000000000..5f34b20ecd4 --- /dev/null +++ b/arch/arm/mach-shmobile/include/mach/r7s72100.h @@ -0,0 +1,8 @@ +#ifndef __ASM_R7S72100_H__ +#define __ASM_R7S72100_H__ + +void r7s72100_add_dt_devices(void); +void r7s72100_clock_init(void); +void r7s72100_init_early(void); + +#endif /* __ASM_R7S72100_H__ */ diff --git a/arch/arm/mach-shmobile/include/mach/r8a73a4.h b/arch/arm/mach-shmobile/include/mach/r8a73a4.h index f3a9b702da5..ce8bdd1d8a8 100644 --- a/arch/arm/mach-shmobile/include/mach/r8a73a4.h +++ b/arch/arm/mach-shmobile/include/mach/r8a73a4.h @@ -1,10 +1,19 @@ #ifndef __ASM_R8A73A4_H__ #define __ASM_R8A73A4_H__ +/* DMA slave IDs */ +enum { + SHDMA_SLAVE_INVALID, + SHDMA_SLAVE_MMCIF0_TX, + SHDMA_SLAVE_MMCIF0_RX, + SHDMA_SLAVE_MMCIF1_TX, + SHDMA_SLAVE_MMCIF1_RX, +}; + void r8a73a4_add_standard_devices(void); void r8a73a4_add_dt_devices(void); void r8a73a4_clock_init(void); void r8a73a4_pinmux_init(void); -void r8a73a4_init_delay(void); +void r8a73a4_init_early(void); #endif /* __ASM_R8A73A4_H__ */ diff --git a/arch/arm/mach-shmobile/include/mach/r8a7778.h b/arch/arm/mach-shmobile/include/mach/r8a7778.h index adfcf51b163..441886c9714 100644 --- a/arch/arm/mach-shmobile/include/mach/r8a7778.h +++ b/arch/arm/mach-shmobile/include/mach/r8a7778.h @@ -1,6 +1,7 @@ /* * Copyright (C) 2013 Renesas Solutions Corp. * Copyright (C) 2013 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> + * Copyright (C) 2013 Cogent Embedded, Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -21,11 +22,15 @@ #include <linux/sh_eth.h> #include <linux/platform_data/camera-rcar.h> +/* HPB-DMA slave IDs */ +enum { + HPBDMA_SLAVE_DUMMY, + HPBDMA_SLAVE_SDHI0_TX, + HPBDMA_SLAVE_SDHI0_RX, +}; + extern void r8a7778_add_standard_devices(void); extern void r8a7778_add_standard_devices_dt(void); -extern void r8a7778_add_ether_device(struct sh_eth_plat_data *pdata); -extern void r8a7778_add_vin_device(int id, - struct rcar_vin_platform_data *pdata); extern void r8a7778_add_dt_devices(void); extern void r8a7778_init_late(void); @@ -33,6 +38,9 @@ extern void r8a7778_init_delay(void); extern void r8a7778_init_irq_dt(void); extern void r8a7778_clock_init(void); extern void r8a7778_init_irq_extpin(int irlm); +extern void r8a7778_init_irq_extpin_dt(int irlm); extern void r8a7778_pinmux_init(void); +extern int r8a7778_usb_phy_power(bool enable); + #endif /* __ASM_R8A7778_H__ */ diff --git a/arch/arm/mach-shmobile/include/mach/r8a7779.h b/arch/arm/mach-shmobile/include/mach/r8a7779.h index 11c740047e1..17af34ed89c 100644 --- a/arch/arm/mach-shmobile/include/mach/r8a7779.h +++ b/arch/arm/mach-shmobile/include/mach/r8a7779.h @@ -6,6 +6,13 @@ #include <linux/sh_eth.h> #include <linux/platform_data/camera-rcar.h> +/* HPB-DMA slave IDs */ +enum { + HPBDMA_SLAVE_DUMMY, + HPBDMA_SLAVE_SDHI0_TX, + HPBDMA_SLAVE_SDHI0_RX, +}; + struct platform_device; struct r8a7779_pm_ch { @@ -26,6 +33,7 @@ static inline struct r8a7779_pm_ch *to_r8a7779_ch(struct generic_pm_domain *d) extern void r8a7779_init_delay(void); extern void r8a7779_init_irq_extpin(int irlm); +extern void r8a7779_init_irq_extpin_dt(int irlm); extern void r8a7779_init_irq_dt(void); extern void r8a7779_map_io(void); extern void r8a7779_earlytimer_init(void); diff --git a/arch/arm/mach-shmobile/include/mach/r8a7790.h b/arch/arm/mach-shmobile/include/mach/r8a7790.h index 788d5595209..5fbfa28b40b 100644 --- a/arch/arm/mach-shmobile/include/mach/r8a7790.h +++ b/arch/arm/mach-shmobile/include/mach/r8a7790.h @@ -1,14 +1,13 @@ #ifndef __ASM_R8A7790_H__ #define __ASM_R8A7790_H__ +#include <mach/rcar-gen2.h> + void r8a7790_add_standard_devices(void); void r8a7790_add_dt_devices(void); void r8a7790_clock_init(void); void r8a7790_pinmux_init(void); -void r8a7790_init_delay(void); -void r8a7790_timer_init(void); - -#define MD(nr) BIT(nr) -u32 r8a7790_read_mode_pins(void); +void r8a7790_init_early(void); +extern struct smp_operations r8a7790_smp_ops; #endif /* __ASM_R8A7790_H__ */ diff --git a/arch/arm/mach-shmobile/include/mach/r8a7791.h b/arch/arm/mach-shmobile/include/mach/r8a7791.h new file mode 100644 index 00000000000..051ead3c286 --- /dev/null +++ b/arch/arm/mach-shmobile/include/mach/r8a7791.h @@ -0,0 +1,10 @@ +#ifndef __ASM_R8A7791_H__ +#define __ASM_R8A7791_H__ + +void r8a7791_add_standard_devices(void); +void r8a7791_add_dt_devices(void); +void r8a7791_clock_init(void); +void r8a7791_init_early(void); +extern struct smp_operations r8a7791_smp_ops; + +#endif /* __ASM_R8A7791_H__ */ diff --git a/arch/arm/mach-shmobile/include/mach/rcar-gen2.h b/arch/arm/mach-shmobile/include/mach/rcar-gen2.h new file mode 100644 index 00000000000..43f606eb2d8 --- /dev/null +++ b/arch/arm/mach-shmobile/include/mach/rcar-gen2.h @@ -0,0 +1,8 @@ +#ifndef __ASM_RCAR_GEN2_H__ +#define __ASM_RCAR_GEN2_H__ + +void rcar_gen2_timer_init(void); +#define MD(nr) BIT(nr) +u32 rcar_gen2_read_mode_pins(void); + +#endif /* __ASM_RCAR_GEN2_H__ */ diff --git a/arch/arm/mach-shmobile/platsmp-apmu.c b/arch/arm/mach-shmobile/platsmp-apmu.c new file mode 100644 index 00000000000..1da5a72d964 --- /dev/null +++ b/arch/arm/mach-shmobile/platsmp-apmu.c @@ -0,0 +1,195 @@ +/* + * SMP support for SoCs with APMU + * + * Copyright (C) 2013 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/ioport.h> +#include <linux/of_address.h> +#include <linux/smp.h> +#include <asm/cacheflush.h> +#include <asm/cp15.h> +#include <asm/smp_plat.h> +#include <mach/common.h> + +static struct { + void __iomem *iomem; + int bit; +} apmu_cpus[CONFIG_NR_CPUS]; + +#define WUPCR_OFFS 0x10 +#define PSTR_OFFS 0x40 +#define CPUNCR_OFFS(n) (0x100 + (0x10 * (n))) + +static int apmu_power_on(void __iomem *p, int bit) +{ + /* request power on */ + writel_relaxed(BIT(bit), p + WUPCR_OFFS); + + /* wait for APMU to finish */ + while (readl_relaxed(p + WUPCR_OFFS) != 0) + ; + + return 0; +} + +static int apmu_power_off(void __iomem *p, int bit) +{ + /* request Core Standby for next WFI */ + writel_relaxed(3, p + CPUNCR_OFFS(bit)); + return 0; +} + +static int apmu_power_off_poll(void __iomem *p, int bit) +{ + int k; + + for (k = 0; k < 1000; k++) { + if (((readl_relaxed(p + PSTR_OFFS) >> (bit * 4)) & 0x03) == 3) + return 1; + + mdelay(1); + } + + return 0; +} + +static int apmu_wrap(int cpu, int (*fn)(void __iomem *p, int cpu)) +{ + void __iomem *p = apmu_cpus[cpu].iomem; + + return p ? fn(p, apmu_cpus[cpu].bit) : -EINVAL; +} + +static void apmu_init_cpu(struct resource *res, int cpu, int bit) +{ + if (apmu_cpus[cpu].iomem) + return; + + apmu_cpus[cpu].iomem = ioremap_nocache(res->start, resource_size(res)); + apmu_cpus[cpu].bit = bit; + + pr_debug("apmu ioremap %d %d 0x%08x 0x%08x\n", cpu, bit, + res->start, resource_size(res)); +} + +static struct { + struct resource iomem; + int cpus[4]; +} apmu_config[] = { + { + .iomem = DEFINE_RES_MEM(0xe6152000, 0x88), + .cpus = { 0, 1, 2, 3 }, + }, + { + .iomem = DEFINE_RES_MEM(0xe6151000, 0x88), + .cpus = { 0x100, 0x101, 0x102, 0x103 }, + } +}; + +static void apmu_parse_cfg(void (*fn)(struct resource *res, int cpu, int bit)) +{ + u32 id; + int k; + int bit, index; + bool is_allowed; + + for (k = 0; k < ARRAY_SIZE(apmu_config); k++) { + /* only enable the cluster that includes the boot CPU */ + is_allowed = false; + for (bit = 0; bit < ARRAY_SIZE(apmu_config[k].cpus); bit++) { + id = apmu_config[k].cpus[bit]; + if (id >= 0) { + if (id == cpu_logical_map(0)) + is_allowed = true; + } + } + if (!is_allowed) + continue; + + for (bit = 0; bit < ARRAY_SIZE(apmu_config[k].cpus); bit++) { + id = apmu_config[k].cpus[bit]; + if (id >= 0) { + index = get_logical_index(id); + if (index >= 0) + fn(&apmu_config[k].iomem, index, bit); + } + } + } +} + +void __init shmobile_smp_apmu_prepare_cpus(unsigned int max_cpus) +{ + /* install boot code shared by all CPUs */ + shmobile_boot_fn = virt_to_phys(shmobile_smp_boot); + shmobile_boot_arg = MPIDR_HWID_BITMASK; + + /* perform per-cpu setup */ + apmu_parse_cfg(apmu_init_cpu); +} + +int shmobile_smp_apmu_boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + /* For this particular CPU register boot vector */ + shmobile_smp_hook(cpu, virt_to_phys(shmobile_invalidate_start), 0); + + return apmu_wrap(cpu, apmu_power_on); +} + +#ifdef CONFIG_HOTPLUG_CPU +/* nicked from arch/arm/mach-exynos/hotplug.c */ +static inline void cpu_enter_lowpower_a15(void) +{ + unsigned int v; + + asm volatile( + " mrc p15, 0, %0, c1, c0, 0\n" + " bic %0, %0, %1\n" + " mcr p15, 0, %0, c1, c0, 0\n" + : "=&r" (v) + : "Ir" (CR_C) + : "cc"); + + flush_cache_louis(); + + asm volatile( + /* + * Turn off coherency + */ + " mrc p15, 0, %0, c1, c0, 1\n" + " bic %0, %0, %1\n" + " mcr p15, 0, %0, c1, c0, 1\n" + : "=&r" (v) + : "Ir" (0x40) + : "cc"); + + isb(); + dsb(); +} + +void shmobile_smp_apmu_cpu_die(unsigned int cpu) +{ + /* For this particular CPU deregister boot vector */ + shmobile_smp_hook(cpu, 0, 0); + + /* Select next sleep mode using the APMU */ + apmu_wrap(cpu, apmu_power_off); + + /* Do ARM specific CPU shutdown */ + cpu_enter_lowpower_a15(); + + /* jump to shared mach-shmobile sleep / reset code */ + shmobile_smp_sleep(); +} + +int shmobile_smp_apmu_cpu_kill(unsigned int cpu) +{ + return apmu_wrap(cpu, apmu_power_off_poll); +} +#endif diff --git a/arch/arm/mach-shmobile/platsmp-scu.c b/arch/arm/mach-shmobile/platsmp-scu.c index c96f50160be..673ad6e8086 100644 --- a/arch/arm/mach-shmobile/platsmp-scu.c +++ b/arch/arm/mach-shmobile/platsmp-scu.c @@ -7,6 +7,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#include <linux/cpu.h> #include <linux/delay.h> #include <linux/init.h> #include <linux/io.h> @@ -16,6 +17,26 @@ #include <asm/smp_scu.h> #include <mach/common.h> +static int shmobile_smp_scu_notifier_call(struct notifier_block *nfb, + unsigned long action, void *hcpu) +{ + unsigned int cpu = (long)hcpu; + + switch (action) { + case CPU_UP_PREPARE: + /* For this particular CPU register SCU SMP boot vector */ + shmobile_smp_hook(cpu, virt_to_phys(shmobile_boot_scu), + (unsigned long)shmobile_scu_base); + break; + }; + + return NOTIFY_OK; +} + +static struct notifier_block shmobile_smp_scu_notifier = { + .notifier_call = shmobile_smp_scu_notifier_call, +}; + void __init shmobile_smp_scu_prepare_cpus(unsigned int max_cpus) { /* install boot code shared by all CPUs */ @@ -25,14 +46,9 @@ void __init shmobile_smp_scu_prepare_cpus(unsigned int max_cpus) /* enable SCU and cache coherency on booting CPU */ scu_enable(shmobile_scu_base); scu_power_mode(shmobile_scu_base, SCU_PM_NORMAL); -} -int shmobile_smp_scu_boot_secondary(unsigned int cpu, struct task_struct *idle) -{ - /* For this particular CPU register SCU boot vector */ - shmobile_smp_hook(cpu, virt_to_phys(shmobile_boot_scu), - (unsigned long)shmobile_scu_base); - return 0; + /* Use CPU notifier for reset vector control */ + register_cpu_notifier(&shmobile_smp_scu_notifier); } #ifdef CONFIG_HOTPLUG_CPU diff --git a/arch/arm/mach-shmobile/platsmp.c b/arch/arm/mach-shmobile/platsmp.c index d4ae616bced..9ebc246b8d7 100644 --- a/arch/arm/mach-shmobile/platsmp.c +++ b/arch/arm/mach-shmobile/platsmp.c @@ -11,25 +11,10 @@ * published by the Free Software Foundation. */ #include <linux/init.h> -#include <linux/smp.h> #include <asm/cacheflush.h> #include <asm/smp_plat.h> #include <mach/common.h> -void __init shmobile_smp_init_cpus(unsigned int ncores) -{ - unsigned int i; - - if (ncores > nr_cpu_ids) { - pr_warn("SMP: %u cores greater than maximum (%u), clipping\n", - ncores, nr_cpu_ids); - ncores = nr_cpu_ids; - } - - for (i = 0; i < ncores; i++) - set_cpu_possible(i, true); -} - extern unsigned long shmobile_smp_fn[]; extern unsigned long shmobile_smp_arg[]; extern unsigned long shmobile_smp_mpidr[]; @@ -44,3 +29,10 @@ void shmobile_smp_hook(unsigned int cpu, unsigned long fn, unsigned long arg) shmobile_smp_arg[cpu] = arg; flush_cache_all(); } + +#ifdef CONFIG_HOTPLUG_CPU +int shmobile_smp_cpu_disable(unsigned int cpu) +{ + return 0; /* Hotplug of any CPU is supported */ +} +#endif diff --git a/arch/arm/mach-shmobile/setup-r7s72100.c b/arch/arm/mach-shmobile/setup-r7s72100.c new file mode 100644 index 00000000000..d4eb509a1c8 --- /dev/null +++ b/arch/arm/mach-shmobile/setup-r7s72100.c @@ -0,0 +1,88 @@ +/* + * r7s72100 processor support + * + * Copyright (C) 2013 Renesas Solutions Corp. + * Copyright (C) 2013 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/irq.h> +#include <linux/kernel.h> +#include <linux/of_platform.h> +#include <linux/serial_sci.h> +#include <mach/common.h> +#include <mach/irqs.h> +#include <mach/r7s72100.h> +#include <asm/mach/arch.h> + +#define SCIF_DATA(index, baseaddr, irq) \ +[index] = { \ + .type = PORT_SCIF, \ + .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE, \ + .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, \ + .scbrr_algo_id = SCBRR_ALGO_2, \ + .scscr = SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE | \ + SCSCR_REIE, \ + .mapbase = baseaddr, \ + .irqs = { irq + 1, irq + 2, irq + 3, irq }, \ +} + +enum { SCIF0, SCIF1, SCIF2, SCIF3, SCIF4, SCIF5, SCIF6, SCIF7 }; + +static const struct plat_sci_port scif[] __initconst = { + SCIF_DATA(SCIF0, 0xe8007000, gic_iid(221)), /* SCIF0 */ + SCIF_DATA(SCIF1, 0xe8007800, gic_iid(225)), /* SCIF1 */ + SCIF_DATA(SCIF2, 0xe8008000, gic_iid(229)), /* SCIF2 */ + SCIF_DATA(SCIF3, 0xe8008800, gic_iid(233)), /* SCIF3 */ + SCIF_DATA(SCIF4, 0xe8009000, gic_iid(237)), /* SCIF4 */ + SCIF_DATA(SCIF5, 0xe8009800, gic_iid(241)), /* SCIF5 */ + SCIF_DATA(SCIF6, 0xe800a000, gic_iid(245)), /* SCIF6 */ + SCIF_DATA(SCIF7, 0xe800a800, gic_iid(249)), /* SCIF7 */ +}; + +static inline void r7s72100_register_scif(int idx) +{ + platform_device_register_data(&platform_bus, "sh-sci", idx, &scif[idx], + sizeof(struct plat_sci_port)); +} + +void __init r7s72100_add_dt_devices(void) +{ + r7s72100_register_scif(SCIF0); + r7s72100_register_scif(SCIF1); + r7s72100_register_scif(SCIF2); + r7s72100_register_scif(SCIF3); + r7s72100_register_scif(SCIF4); + r7s72100_register_scif(SCIF5); + r7s72100_register_scif(SCIF6); + r7s72100_register_scif(SCIF7); +} + +void __init r7s72100_init_early(void) +{ + shmobile_setup_delay(400, 1, 3); /* Cortex-A9 @ 400MHz */ +} + +#ifdef CONFIG_USE_OF +static const char *r7s72100_boards_compat_dt[] __initdata = { + "renesas,r7s72100", + NULL, +}; + +DT_MACHINE_START(R7S72100_DT, "Generic R7S72100 (Flattened Device Tree)") + .init_early = r7s72100_init_early, + .dt_compat = r7s72100_boards_compat_dt, +MACHINE_END +#endif /* CONFIG_USE_OF */ diff --git a/arch/arm/mach-shmobile/setup-r8a73a4.c b/arch/arm/mach-shmobile/setup-r8a73a4.c index 89491700afb..b0f2749071b 100644 --- a/arch/arm/mach-shmobile/setup-r8a73a4.c +++ b/arch/arm/mach-shmobile/setup-r8a73a4.c @@ -22,8 +22,10 @@ #include <linux/of_platform.h> #include <linux/platform_data/irq-renesas-irqc.h> #include <linux/serial_sci.h> +#include <linux/sh_dma.h> #include <linux/sh_timer.h> #include <mach/common.h> +#include <mach/dma-register.h> #include <mach/irqs.h> #include <mach/r8a73a4.h> #include <asm/mach/arch.h> @@ -199,15 +201,104 @@ void __init r8a73a4_add_dt_devices(void) r8a7790_register_cmt(10); } +/* DMA */ +static const struct sh_dmae_slave_config dma_slaves[] = { + { + .slave_id = SHDMA_SLAVE_MMCIF0_TX, + .addr = 0xee200034, + .chcr = CHCR_TX(XMIT_SZ_32BIT), + .mid_rid = 0xd1, + }, { + .slave_id = SHDMA_SLAVE_MMCIF0_RX, + .addr = 0xee200034, + .chcr = CHCR_RX(XMIT_SZ_32BIT), + .mid_rid = 0xd2, + }, { + .slave_id = SHDMA_SLAVE_MMCIF1_TX, + .addr = 0xee220034, + .chcr = CHCR_TX(XMIT_SZ_32BIT), + .mid_rid = 0xe1, + }, { + .slave_id = SHDMA_SLAVE_MMCIF1_RX, + .addr = 0xee220034, + .chcr = CHCR_RX(XMIT_SZ_32BIT), + .mid_rid = 0xe2, + }, +}; + +#define DMAE_CHANNEL(a, b) \ + { \ + .offset = (a) - 0x20, \ + .dmars = (a) - 0x20 + 0x40, \ + .chclr_bit = (b), \ + .chclr_offset = 0x80 - 0x20, \ + } + +static const struct sh_dmae_channel dma_channels[] = { + DMAE_CHANNEL(0x8000, 0), + DMAE_CHANNEL(0x8080, 1), + DMAE_CHANNEL(0x8100, 2), + DMAE_CHANNEL(0x8180, 3), + DMAE_CHANNEL(0x8200, 4), + DMAE_CHANNEL(0x8280, 5), + DMAE_CHANNEL(0x8300, 6), + DMAE_CHANNEL(0x8380, 7), + DMAE_CHANNEL(0x8400, 8), + DMAE_CHANNEL(0x8480, 9), + DMAE_CHANNEL(0x8500, 10), + DMAE_CHANNEL(0x8580, 11), + DMAE_CHANNEL(0x8600, 12), + DMAE_CHANNEL(0x8680, 13), + DMAE_CHANNEL(0x8700, 14), + DMAE_CHANNEL(0x8780, 15), + DMAE_CHANNEL(0x8800, 16), + DMAE_CHANNEL(0x8880, 17), + DMAE_CHANNEL(0x8900, 18), + DMAE_CHANNEL(0x8980, 19), +}; + +static const struct sh_dmae_pdata dma_pdata = { + .slave = dma_slaves, + .slave_num = ARRAY_SIZE(dma_slaves), + .channel = dma_channels, + .channel_num = ARRAY_SIZE(dma_channels), + .ts_low_shift = TS_LOW_SHIFT, + .ts_low_mask = TS_LOW_BIT << TS_LOW_SHIFT, + .ts_high_shift = TS_HI_SHIFT, + .ts_high_mask = TS_HI_BIT << TS_HI_SHIFT, + .ts_shift = dma_ts_shift, + .ts_shift_num = ARRAY_SIZE(dma_ts_shift), + .dmaor_init = DMAOR_DME, + .chclr_present = 1, + .chclr_bitwise = 1, +}; + +static struct resource dma_resources[] = { + DEFINE_RES_MEM(0xe6700020, 0x89e0), + DEFINE_RES_IRQ_NAMED(gic_spi(220), "error_irq"), + { + /* IRQ for channels 0-19 */ + .start = gic_spi(200), + .end = gic_spi(219), + .flags = IORESOURCE_IRQ, + }, +}; + +#define r8a73a4_register_dmac() \ + platform_device_register_resndata(&platform_bus, "sh-dma-engine", 0, \ + dma_resources, ARRAY_SIZE(dma_resources), \ + &dma_pdata, sizeof(dma_pdata)) + void __init r8a73a4_add_standard_devices(void) { r8a73a4_add_dt_devices(); r8a73a4_register_irqc(0); r8a73a4_register_irqc(1); r8a73a4_register_thermal(); + r8a73a4_register_dmac(); } -void __init r8a73a4_init_delay(void) +void __init r8a73a4_init_early(void) { #ifndef CONFIG_ARM_ARCH_TIMER shmobile_setup_delay(1500, 2, 4); /* Cortex-A15 @ 1500MHz */ @@ -222,7 +313,7 @@ static const char *r8a73a4_boards_compat_dt[] __initdata = { }; DT_MACHINE_START(R8A73A4_DT, "Generic R8A73A4 (Flattened Device Tree)") - .init_early = r8a73a4_init_delay, + .init_early = r8a73a4_init_early, .dt_compat = r8a73a4_boards_compat_dt, MACHINE_END #endif /* CONFIG_USE_OF */ diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c index 6a2657ebd19..03fcc5974ef 100644 --- a/arch/arm/mach-shmobile/setup-r8a7778.c +++ b/arch/arm/mach-shmobile/setup-r8a7778.c @@ -24,6 +24,7 @@ #include <linux/irqchip/arm-gic.h> #include <linux/of.h> #include <linux/of_platform.h> +#include <linux/platform_data/dma-rcar-hpbdma.h> #include <linux/platform_data/gpio-rcar.h> #include <linux/platform_data/irq-renesas-intc-irqpin.h> #include <linux/platform_device.h> @@ -95,29 +96,46 @@ static struct sh_timer_config sh_tmu1_platform_data __initdata = { &sh_tmu##idx##_platform_data, \ sizeof(sh_tmu##idx##_platform_data)) -/* USB */ -static struct usb_phy *phy; +int r8a7778_usb_phy_power(bool enable) +{ + static struct usb_phy *phy = NULL; + int ret = 0; + if (!phy) + phy = usb_get_phy(USB_PHY_TYPE_USB2); + + if (IS_ERR(phy)) { + pr_err("kernel doesn't have usb phy driver\n"); + return PTR_ERR(phy); + } + + if (enable) + ret = usb_phy_init(phy); + else + usb_phy_shutdown(phy); + + return ret; +} + +/* USB */ static int usb_power_on(struct platform_device *pdev) { - if (IS_ERR(phy)) - return PTR_ERR(phy); + int ret = r8a7778_usb_phy_power(true); + + if (ret) + return ret; pm_runtime_enable(&pdev->dev); pm_runtime_get_sync(&pdev->dev); - usb_phy_init(phy); - return 0; } static void usb_power_off(struct platform_device *pdev) { - if (IS_ERR(phy)) + if (r8a7778_usb_phy_power(false)) return; - usb_phy_shutdown(phy); - pm_runtime_put_sync(&pdev->dev); pm_runtime_disable(&pdev->dev); } @@ -174,20 +192,6 @@ static struct platform_device_info hci##_info __initdata = { \ USB_PLATFORM_INFO(ehci); USB_PLATFORM_INFO(ohci); -/* Ether */ -static struct resource ether_resources[] __initdata = { - DEFINE_RES_MEM(0xfde00000, 0x400), - DEFINE_RES_IRQ(gic_iid(0x89)), -}; - -void __init r8a7778_add_ether_device(struct sh_eth_plat_data *pdata) -{ - platform_device_register_resndata(&platform_bus, "r8a777x-ether", -1, - ether_resources, - ARRAY_SIZE(ether_resources), - pdata, sizeof(*pdata)); -} - /* PFC/GPIO */ static struct resource pfc_resources[] __initdata = { DEFINE_RES_MEM(0xfffc0000, 0x118), @@ -272,7 +276,7 @@ static struct resource hspi_resources[] __initdata = { DEFINE_RES_IRQ(gic_iid(0x75)), }; -void __init r8a7778_register_hspi(int id) +static void __init r8a7778_register_hspi(int id) { BUG_ON(id < 0 || id > 2); @@ -281,40 +285,6 @@ void __init r8a7778_register_hspi(int id) hspi_resources + (2 * id), 2); } -/* VIN */ -#define R8A7778_VIN(idx) \ -static struct resource vin##idx##_resources[] __initdata = { \ - DEFINE_RES_MEM(0xffc50000 + 0x1000 * (idx), 0x1000), \ - DEFINE_RES_IRQ(gic_iid(0x5a)), \ -}; \ - \ -static struct platform_device_info vin##idx##_info __initdata = { \ - .parent = &platform_bus, \ - .name = "r8a7778-vin", \ - .id = idx, \ - .res = vin##idx##_resources, \ - .num_res = ARRAY_SIZE(vin##idx##_resources), \ - .dma_mask = DMA_BIT_MASK(32), \ -} - -R8A7778_VIN(0); -R8A7778_VIN(1); - -static struct platform_device_info *vin_info_table[] __initdata = { - &vin0_info, - &vin1_info, -}; - -void __init r8a7778_add_vin_device(int id, struct rcar_vin_platform_data *pdata) -{ - BUG_ON(id < 0 || id > 1); - - vin_info_table[id]->data = pdata; - vin_info_table[id]->size_data = sizeof(*pdata); - - platform_device_register_full(vin_info_table[id]); -} - void __init r8a7778_add_dt_devices(void) { int i; @@ -339,6 +309,88 @@ void __init r8a7778_add_dt_devices(void) r8a7778_register_tmu(1); } +/* HPB-DMA */ + +/* Asynchronous mode register (ASYNCMDR) bits */ +#define HPB_DMAE_ASYNCMDR_ASMD22_MASK BIT(2) /* SDHI0 */ +#define HPB_DMAE_ASYNCMDR_ASMD22_SINGLE BIT(2) /* SDHI0 */ +#define HPB_DMAE_ASYNCMDR_ASMD22_MULTI 0 /* SDHI0 */ +#define HPB_DMAE_ASYNCMDR_ASMD21_MASK BIT(1) /* SDHI0 */ +#define HPB_DMAE_ASYNCMDR_ASMD21_SINGLE BIT(1) /* SDHI0 */ +#define HPB_DMAE_ASYNCMDR_ASMD21_MULTI 0 /* SDHI0 */ + +static const struct hpb_dmae_slave_config hpb_dmae_slaves[] = { + { + .id = HPBDMA_SLAVE_SDHI0_TX, + .addr = 0xffe4c000 + 0x30, + .dcr = HPB_DMAE_DCR_SPDS_16BIT | + HPB_DMAE_DCR_DMDL | + HPB_DMAE_DCR_DPDS_16BIT, + .rstr = HPB_DMAE_ASYNCRSTR_ASRST21 | + HPB_DMAE_ASYNCRSTR_ASRST22 | + HPB_DMAE_ASYNCRSTR_ASRST23, + .mdr = HPB_DMAE_ASYNCMDR_ASMD21_MULTI, + .mdm = HPB_DMAE_ASYNCMDR_ASMD21_MASK, + .port = 0x0D0C, + .flags = HPB_DMAE_SET_ASYNC_RESET | HPB_DMAE_SET_ASYNC_MODE, + .dma_ch = 21, + }, { + .id = HPBDMA_SLAVE_SDHI0_RX, + .addr = 0xffe4c000 + 0x30, + .dcr = HPB_DMAE_DCR_SMDL | + HPB_DMAE_DCR_SPDS_16BIT | + HPB_DMAE_DCR_DPDS_16BIT, + .rstr = HPB_DMAE_ASYNCRSTR_ASRST21 | + HPB_DMAE_ASYNCRSTR_ASRST22 | + HPB_DMAE_ASYNCRSTR_ASRST23, + .mdr = HPB_DMAE_ASYNCMDR_ASMD22_MULTI, + .mdm = HPB_DMAE_ASYNCMDR_ASMD22_MASK, + .port = 0x0D0C, + .flags = HPB_DMAE_SET_ASYNC_RESET | HPB_DMAE_SET_ASYNC_MODE, + .dma_ch = 22, + }, +}; + +static const struct hpb_dmae_channel hpb_dmae_channels[] = { + HPB_DMAE_CHANNEL(0x7e, HPBDMA_SLAVE_SDHI0_TX), /* ch. 21 */ + HPB_DMAE_CHANNEL(0x7e, HPBDMA_SLAVE_SDHI0_RX), /* ch. 22 */ +}; + +static struct hpb_dmae_pdata dma_platform_data __initdata = { + .slaves = hpb_dmae_slaves, + .num_slaves = ARRAY_SIZE(hpb_dmae_slaves), + .channels = hpb_dmae_channels, + .num_channels = ARRAY_SIZE(hpb_dmae_channels), + .ts_shift = { + [XMIT_SZ_8BIT] = 0, + [XMIT_SZ_16BIT] = 1, + [XMIT_SZ_32BIT] = 2, + }, + .num_hw_channels = 39, +}; + +static struct resource hpb_dmae_resources[] __initdata = { + /* Channel registers */ + DEFINE_RES_MEM(0xffc08000, 0x1000), + /* Common registers */ + DEFINE_RES_MEM(0xffc09000, 0x170), + /* Asynchronous reset registers */ + DEFINE_RES_MEM(0xffc00300, 4), + /* Asynchronous mode registers */ + DEFINE_RES_MEM(0xffc00400, 4), + /* IRQ for DMA channels */ + DEFINE_RES_NAMED(gic_iid(0x7b), 5, NULL, IORESOURCE_IRQ), +}; + +static void __init r8a7778_register_hpb_dmae(void) +{ + platform_device_register_resndata(&platform_bus, "hpb-dma-engine", -1, + hpb_dmae_resources, + ARRAY_SIZE(hpb_dmae_resources), + &dma_platform_data, + sizeof(dma_platform_data)); +} + void __init r8a7778_add_standard_devices(void) { r8a7778_add_dt_devices(); @@ -349,12 +401,12 @@ void __init r8a7778_add_standard_devices(void) r8a7778_register_hspi(0); r8a7778_register_hspi(1); r8a7778_register_hspi(2); + + r8a7778_register_hpb_dmae(); } void __init r8a7778_init_late(void) { - phy = usb_get_phy(USB_PHY_TYPE_USB2); - platform_device_register_full(&ehci_info); platform_device_register_full(&ohci_info); } @@ -376,7 +428,7 @@ static struct resource irqpin_resources[] __initdata = { DEFINE_RES_IRQ(gic_iid(0x3e)), /* IRQ3 */ }; -void __init r8a7778_init_irq_extpin(int irlm) +void __init r8a7778_init_irq_extpin_dt(int irlm) { void __iomem *icr0 = ioremap_nocache(0xfe780000, PAGE_SIZE); unsigned long tmp; @@ -394,7 +446,11 @@ void __init r8a7778_init_irq_extpin(int irlm) tmp |= (1 << 21); /* LVLMODE = 1 */ iowrite32(tmp, icr0); iounmap(icr0); +} +void __init r8a7778_init_irq_extpin(int irlm) +{ + r8a7778_init_irq_extpin_dt(irlm); if (irlm) platform_device_register_resndata( &platform_bus, "renesas_intc_irqpin", -1, diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c index ecd0148ee1e..13049e9d691 100644 --- a/arch/arm/mach-shmobile/setup-r8a7779.c +++ b/arch/arm/mach-shmobile/setup-r8a7779.c @@ -25,6 +25,7 @@ #include <linux/irqchip.h> #include <linux/irqchip/arm-gic.h> #include <linux/of_platform.h> +#include <linux/platform_data/dma-rcar-hpbdma.h> #include <linux/platform_data/gpio-rcar.h> #include <linux/platform_data/irq-renesas-intc-irqpin.h> #include <linux/platform_device.h> @@ -97,7 +98,7 @@ static struct resource irqpin0_resources[] __initdata = { DEFINE_RES_IRQ(gic_spi(30)), /* IRQ3 */ }; -void __init r8a7779_init_irq_extpin(int irlm) +void __init r8a7779_init_irq_extpin_dt(int irlm) { void __iomem *icr0 = ioremap_nocache(0xfe780000, PAGE_SIZE); u32 tmp; @@ -115,7 +116,11 @@ void __init r8a7779_init_irq_extpin(int irlm) tmp |= (1 << 21); /* LVLMODE = 1 */ iowrite32(tmp, icr0); iounmap(icr0); +} +void __init r8a7779_init_irq_extpin(int irlm) +{ + r8a7779_init_irq_extpin_dt(irlm); if (irlm) platform_device_register_resndata( &platform_bus, "renesas_intc_irqpin", -1, @@ -632,6 +637,158 @@ static struct platform_device_info *vin_info_table[] __initdata = { &vin3_info, }; +/* HPB-DMA */ + +/* Asynchronous mode register bits */ +#define HPB_DMAE_ASYNCMDR_ASMD43_MASK BIT(23) /* MMC1 */ +#define HPB_DMAE_ASYNCMDR_ASMD43_SINGLE BIT(23) /* MMC1 */ +#define HPB_DMAE_ASYNCMDR_ASMD43_MULTI 0 /* MMC1 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD43_MASK BIT(22) /* MMC1 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD43_BURST BIT(22) /* MMC1 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD43_NBURST 0 /* MMC1 */ +#define HPB_DMAE_ASYNCMDR_ASMD24_MASK BIT(21) /* MMC0 */ +#define HPB_DMAE_ASYNCMDR_ASMD24_SINGLE BIT(21) /* MMC0 */ +#define HPB_DMAE_ASYNCMDR_ASMD24_MULTI 0 /* MMC0 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD24_MASK BIT(20) /* MMC0 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD24_BURST BIT(20) /* MMC0 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD24_NBURST 0 /* MMC0 */ +#define HPB_DMAE_ASYNCMDR_ASMD41_MASK BIT(19) /* SDHI3 */ +#define HPB_DMAE_ASYNCMDR_ASMD41_SINGLE BIT(19) /* SDHI3 */ +#define HPB_DMAE_ASYNCMDR_ASMD41_MULTI 0 /* SDHI3 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD41_MASK BIT(18) /* SDHI3 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD41_BURST BIT(18) /* SDHI3 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD41_NBURST 0 /* SDHI3 */ +#define HPB_DMAE_ASYNCMDR_ASMD40_MASK BIT(17) /* SDHI3 */ +#define HPB_DMAE_ASYNCMDR_ASMD40_SINGLE BIT(17) /* SDHI3 */ +#define HPB_DMAE_ASYNCMDR_ASMD40_MULTI 0 /* SDHI3 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD40_MASK BIT(16) /* SDHI3 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD40_BURST BIT(16) /* SDHI3 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD40_NBURST 0 /* SDHI3 */ +#define HPB_DMAE_ASYNCMDR_ASMD39_MASK BIT(15) /* SDHI3 */ +#define HPB_DMAE_ASYNCMDR_ASMD39_SINGLE BIT(15) /* SDHI3 */ +#define HPB_DMAE_ASYNCMDR_ASMD39_MULTI 0 /* SDHI3 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD39_MASK BIT(14) /* SDHI3 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD39_BURST BIT(14) /* SDHI3 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD39_NBURST 0 /* SDHI3 */ +#define HPB_DMAE_ASYNCMDR_ASMD27_MASK BIT(13) /* SDHI2 */ +#define HPB_DMAE_ASYNCMDR_ASMD27_SINGLE BIT(13) /* SDHI2 */ +#define HPB_DMAE_ASYNCMDR_ASMD27_MULTI 0 /* SDHI2 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD27_MASK BIT(12) /* SDHI2 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD27_BURST BIT(12) /* SDHI2 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD27_NBURST 0 /* SDHI2 */ +#define HPB_DMAE_ASYNCMDR_ASMD26_MASK BIT(11) /* SDHI2 */ +#define HPB_DMAE_ASYNCMDR_ASMD26_SINGLE BIT(11) /* SDHI2 */ +#define HPB_DMAE_ASYNCMDR_ASMD26_MULTI 0 /* SDHI2 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD26_MASK BIT(10) /* SDHI2 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD26_BURST BIT(10) /* SDHI2 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD26_NBURST 0 /* SDHI2 */ +#define HPB_DMAE_ASYNCMDR_ASMD25_MASK BIT(9) /* SDHI2 */ +#define HPB_DMAE_ASYNCMDR_ASMD25_SINGLE BIT(9) /* SDHI2 */ +#define HPB_DMAE_ASYNCMDR_ASMD25_MULTI 0 /* SDHI2 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD25_MASK BIT(8) /* SDHI2 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD25_BURST BIT(8) /* SDHI2 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD25_NBURST 0 /* SDHI2 */ +#define HPB_DMAE_ASYNCMDR_ASMD23_MASK BIT(7) /* SDHI0 */ +#define HPB_DMAE_ASYNCMDR_ASMD23_SINGLE BIT(7) /* SDHI0 */ +#define HPB_DMAE_ASYNCMDR_ASMD23_MULTI 0 /* SDHI0 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD23_MASK BIT(6) /* SDHI0 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD23_BURST BIT(6) /* SDHI0 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD23_NBURST 0 /* SDHI0 */ +#define HPB_DMAE_ASYNCMDR_ASMD22_MASK BIT(5) /* SDHI0 */ +#define HPB_DMAE_ASYNCMDR_ASMD22_SINGLE BIT(5) /* SDHI0 */ +#define HPB_DMAE_ASYNCMDR_ASMD22_MULTI 0 /* SDHI0 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD22_MASK BIT(4) /* SDHI0 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD22_BURST BIT(4) /* SDHI0 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD22_NBURST 0 /* SDHI0 */ +#define HPB_DMAE_ASYNCMDR_ASMD21_MASK BIT(3) /* SDHI0 */ +#define HPB_DMAE_ASYNCMDR_ASMD21_SINGLE BIT(3) /* SDHI0 */ +#define HPB_DMAE_ASYNCMDR_ASMD21_MULTI 0 /* SDHI0 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD21_MASK BIT(2) /* SDHI0 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD21_BURST BIT(2) /* SDHI0 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD21_NBURST 0 /* SDHI0 */ +#define HPB_DMAE_ASYNCMDR_ASMD20_MASK BIT(1) /* SDHI1 */ +#define HPB_DMAE_ASYNCMDR_ASMD20_SINGLE BIT(1) /* SDHI1 */ +#define HPB_DMAE_ASYNCMDR_ASMD20_MULTI 0 /* SDHI1 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD20_MASK BIT(0) /* SDHI1 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD20_BURST BIT(0) /* SDHI1 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD20_NBURST 0 /* SDHI1 */ + +static const struct hpb_dmae_slave_config hpb_dmae_slaves[] = { + { + .id = HPBDMA_SLAVE_SDHI0_TX, + .addr = 0xffe4c000 + 0x30, + .dcr = HPB_DMAE_DCR_SPDS_16BIT | + HPB_DMAE_DCR_DMDL | + HPB_DMAE_DCR_DPDS_16BIT, + .rstr = HPB_DMAE_ASYNCRSTR_ASRST21 | + HPB_DMAE_ASYNCRSTR_ASRST22 | + HPB_DMAE_ASYNCRSTR_ASRST23, + .mdr = HPB_DMAE_ASYNCMDR_ASMD21_SINGLE | + HPB_DMAE_ASYNCMDR_ASBTMD21_NBURST, + .mdm = HPB_DMAE_ASYNCMDR_ASMD21_MASK | + HPB_DMAE_ASYNCMDR_ASBTMD21_MASK, + .port = 0x0D0C, + .flags = HPB_DMAE_SET_ASYNC_RESET | HPB_DMAE_SET_ASYNC_MODE, + .dma_ch = 21, + }, { + .id = HPBDMA_SLAVE_SDHI0_RX, + .addr = 0xffe4c000 + 0x30, + .dcr = HPB_DMAE_DCR_SMDL | + HPB_DMAE_DCR_SPDS_16BIT | + HPB_DMAE_DCR_DPDS_16BIT, + .rstr = HPB_DMAE_ASYNCRSTR_ASRST21 | + HPB_DMAE_ASYNCRSTR_ASRST22 | + HPB_DMAE_ASYNCRSTR_ASRST23, + .mdr = HPB_DMAE_ASYNCMDR_ASMD22_SINGLE | + HPB_DMAE_ASYNCMDR_ASBTMD22_NBURST, + .mdm = HPB_DMAE_ASYNCMDR_ASMD22_MASK | + HPB_DMAE_ASYNCMDR_ASBTMD22_MASK, + .port = 0x0D0C, + .flags = HPB_DMAE_SET_ASYNC_RESET | HPB_DMAE_SET_ASYNC_MODE, + .dma_ch = 22, + }, +}; + +static const struct hpb_dmae_channel hpb_dmae_channels[] = { + HPB_DMAE_CHANNEL(0x93, HPBDMA_SLAVE_SDHI0_TX), /* ch. 21 */ + HPB_DMAE_CHANNEL(0x93, HPBDMA_SLAVE_SDHI0_RX), /* ch. 22 */ +}; + +static struct hpb_dmae_pdata dma_platform_data __initdata = { + .slaves = hpb_dmae_slaves, + .num_slaves = ARRAY_SIZE(hpb_dmae_slaves), + .channels = hpb_dmae_channels, + .num_channels = ARRAY_SIZE(hpb_dmae_channels), + .ts_shift = { + [XMIT_SZ_8BIT] = 0, + [XMIT_SZ_16BIT] = 1, + [XMIT_SZ_32BIT] = 2, + }, + .num_hw_channels = 44, +}; + +static struct resource hpb_dmae_resources[] __initdata = { + /* Channel registers */ + DEFINE_RES_MEM(0xffc08000, 0x1000), + /* Common registers */ + DEFINE_RES_MEM(0xffc09000, 0x170), + /* Asynchronous reset registers */ + DEFINE_RES_MEM(0xffc00300, 4), + /* Asynchronous mode registers */ + DEFINE_RES_MEM(0xffc00400, 4), + /* IRQ for DMA channels */ + DEFINE_RES_NAMED(gic_iid(0x8e), 12, NULL, IORESOURCE_IRQ), +}; + +static void __init r8a7779_register_hpb_dmae(void) +{ + platform_device_register_resndata(&platform_bus, "hpb-dma-engine", -1, + hpb_dmae_resources, + ARRAY_SIZE(hpb_dmae_resources), + &dma_platform_data, + sizeof(dma_platform_data)); +} + static struct platform_device *r8a7779_devices_dt[] __initdata = { &scif0_device, &scif1_device, @@ -665,6 +822,7 @@ void __init r8a7779_add_standard_devices(void) ARRAY_SIZE(r8a7779_devices_dt)); platform_add_devices(r8a7779_standard_devices, ARRAY_SIZE(r8a7779_standard_devices)); + r8a7779_register_hpb_dmae(); } void __init r8a7779_add_ether_device(struct sh_eth_plat_data *pdata) diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c index d0f5c9f9349..c47bcebbcb0 100644 --- a/arch/arm/mach-shmobile/setup-r8a7790.c +++ b/arch/arm/mach-shmobile/setup-r8a7790.c @@ -18,7 +18,6 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -#include <linux/clocksource.h> #include <linux/irq.h> #include <linux/kernel.h> #include <linux/of_platform.h> @@ -31,17 +30,18 @@ #include <mach/r8a7790.h> #include <asm/mach/arch.h> -static struct resource pfc_resources[] __initdata = { +static const struct resource pfc_resources[] __initconst = { DEFINE_RES_MEM(0xe6060000, 0x250), }; #define R8A7790_GPIO(idx) \ -static struct resource r8a7790_gpio##idx##_resources[] __initdata = { \ +static const struct resource r8a7790_gpio##idx##_resources[] __initconst = { \ DEFINE_RES_MEM(0xe6050000 + 0x1000 * (idx), 0x50), \ DEFINE_RES_IRQ(gic_spi(4 + (idx))), \ }; \ \ -static struct gpio_rcar_config r8a7790_gpio##idx##_platform_data __initdata = { \ +static const struct gpio_rcar_config \ +r8a7790_gpio##idx##_platform_data __initconst = { \ .gpio_base = 32 * (idx), \ .irq_base = 0, \ .number_of_pins = 32, \ @@ -112,7 +112,7 @@ void __init r8a7790_pinmux_init(void) enum { SCIFA0, SCIFA1, SCIFB0, SCIFB1, SCIFB2, SCIFA2, SCIF0, SCIF1, HSCIF0, HSCIF1 }; -static struct plat_sci_port scif[] __initdata = { +static const struct plat_sci_port scif[] __initconst = { SCIFA_DATA(SCIFA0, 0xe6c40000, gic_spi(144)), /* SCIFA0 */ SCIFA_DATA(SCIFA1, 0xe6c50000, gic_spi(145)), /* SCIFA1 */ SCIFB_DATA(SCIFB0, 0xe6c20000, gic_spi(148)), /* SCIFB0 */ @@ -131,11 +131,11 @@ static inline void r8a7790_register_scif(int idx) sizeof(struct plat_sci_port)); } -static struct renesas_irqc_config irqc0_data __initdata = { +static const struct renesas_irqc_config irqc0_data __initconst = { .irq_base = irq_pin(0), /* IRQ0 -> IRQ3 */ }; -static struct resource irqc0_resources[] __initdata = { +static const struct resource irqc0_resources[] __initconst = { DEFINE_RES_MEM(0xe61c0000, 0x200), /* IRQC Event Detector Block_0 */ DEFINE_RES_IRQ(gic_spi(0)), /* IRQ0 */ DEFINE_RES_IRQ(gic_spi(1)), /* IRQ1 */ @@ -150,7 +150,7 @@ static struct resource irqc0_resources[] __initdata = { &irqc##idx##_data, \ sizeof(struct renesas_irqc_config)) -static struct resource thermal_resources[] __initdata = { +static const struct resource thermal_resources[] __initconst = { DEFINE_RES_MEM(0xe61f0000, 0x14), DEFINE_RES_MEM(0xe61f0100, 0x38), DEFINE_RES_IRQ(gic_spi(69)), @@ -161,13 +161,13 @@ static struct resource thermal_resources[] __initdata = { thermal_resources, \ ARRAY_SIZE(thermal_resources)) -static struct sh_timer_config cmt00_platform_data __initdata = { +static const struct sh_timer_config cmt00_platform_data __initconst = { .name = "CMT00", .timer_bit = 0, .clockevent_rating = 80, }; -static struct resource cmt00_resources[] __initdata = { +static const struct resource cmt00_resources[] __initconst = { DEFINE_RES_MEM(0xffca0510, 0x0c), DEFINE_RES_MEM(0xffca0500, 0x04), DEFINE_RES_IRQ(gic_spi(142)), /* CMT0_0 */ @@ -202,72 +202,7 @@ void __init r8a7790_add_standard_devices(void) r8a7790_register_thermal(); } -#define MODEMR 0xe6160060 - -u32 __init r8a7790_read_mode_pins(void) -{ - void __iomem *modemr = ioremap_nocache(MODEMR, 4); - u32 mode; - - BUG_ON(!modemr); - mode = ioread32(modemr); - iounmap(modemr); - - return mode; -} - -#define CNTCR 0 -#define CNTFID0 0x20 - -void __init r8a7790_timer_init(void) -{ -#ifdef CONFIG_ARM_ARCH_TIMER - u32 mode = r8a7790_read_mode_pins(); - void __iomem *base; - int extal_mhz = 0; - u32 freq; - - /* At Linux boot time the r8a7790 arch timer comes up - * with the counter disabled. Moreover, it may also report - * a potentially incorrect fixed 13 MHz frequency. To be - * correct these registers need to be updated to use the - * frequency EXTAL / 2 which can be determined by the MD pins. - */ - - switch (mode & (MD(14) | MD(13))) { - case 0: - extal_mhz = 15; - break; - case MD(13): - extal_mhz = 20; - break; - case MD(14): - extal_mhz = 26; - break; - case MD(13) | MD(14): - extal_mhz = 30; - break; - } - - /* The arch timer frequency equals EXTAL / 2 */ - freq = extal_mhz * (1000000 / 2); - - /* Remap "armgcnt address map" space */ - base = ioremap(0xe6080000, PAGE_SIZE); - - /* Update registers with correct frequency */ - iowrite32(freq, base + CNTFID0); - asm volatile("mcr p15, 0, %0, c14, c0, 0" : : "r" (freq)); - - /* make sure arch timer is started by setting bit 0 of CNTCR */ - iowrite32(1, base + CNTCR); - iounmap(base); -#endif /* CONFIG_ARM_ARCH_TIMER */ - - clocksource_of_init(); -} - -void __init r8a7790_init_delay(void) +void __init r8a7790_init_early(void) { #ifndef CONFIG_ARM_ARCH_TIMER shmobile_setup_delay(1300, 2, 4); /* Cortex-A15 @ 1300MHz */ @@ -276,14 +211,15 @@ void __init r8a7790_init_delay(void) #ifdef CONFIG_USE_OF -static const char *r8a7790_boards_compat_dt[] __initdata = { +static const char * const r8a7790_boards_compat_dt[] __initconst = { "renesas,r8a7790", NULL, }; DT_MACHINE_START(R8A7790_DT, "Generic R8A7790 (Flattened Device Tree)") - .init_early = r8a7790_init_delay, - .init_time = r8a7790_timer_init, + .smp = smp_ops(r8a7790_smp_ops), + .init_early = r8a7790_init_early, + .init_time = rcar_gen2_timer_init, .dt_compat = r8a7790_boards_compat_dt, MACHINE_END #endif /* CONFIG_USE_OF */ diff --git a/arch/arm/mach-shmobile/setup-r8a7791.c b/arch/arm/mach-shmobile/setup-r8a7791.c new file mode 100644 index 00000000000..d9393d61ee2 --- /dev/null +++ b/arch/arm/mach-shmobile/setup-r8a7791.c @@ -0,0 +1,184 @@ +/* + * r8a7791 processor support + * + * Copyright (C) 2013 Renesas Electronics Corporation + * Copyright (C) 2013 Renesas Solutions Corp. + * Copyright (C) 2013 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/irq.h> +#include <linux/kernel.h> +#include <linux/of_platform.h> +#include <linux/platform_data/irq-renesas-irqc.h> +#include <linux/serial_sci.h> +#include <linux/sh_timer.h> +#include <mach/common.h> +#include <mach/irqs.h> +#include <mach/r8a7791.h> +#include <mach/rcar-gen2.h> +#include <asm/mach/arch.h> + +#define SCIF_COMMON(scif_type, baseaddr, irq) \ + .type = scif_type, \ + .mapbase = baseaddr, \ + .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, \ + .irqs = SCIx_IRQ_MUXED(irq) + +#define SCIFA_DATA(index, baseaddr, irq) \ +[index] = { \ + SCIF_COMMON(PORT_SCIFA, baseaddr, irq), \ + .scbrr_algo_id = SCBRR_ALGO_4, \ + .scscr = SCSCR_RE | SCSCR_TE, \ +} + +#define SCIFB_DATA(index, baseaddr, irq) \ +[index] = { \ + SCIF_COMMON(PORT_SCIFB, baseaddr, irq), \ + .scbrr_algo_id = SCBRR_ALGO_4, \ + .scscr = SCSCR_RE | SCSCR_TE, \ +} + +#define SCIF_DATA(index, baseaddr, irq) \ +[index] = { \ + SCIF_COMMON(PORT_SCIF, baseaddr, irq), \ + .scbrr_algo_id = SCBRR_ALGO_2, \ + .scscr = SCSCR_RE | SCSCR_TE, \ +} + +#define HSCIF_DATA(index, baseaddr, irq) \ +[index] = { \ + SCIF_COMMON(PORT_HSCIF, baseaddr, irq), \ + .scbrr_algo_id = SCBRR_ALGO_6, \ + .scscr = SCSCR_RE | SCSCR_TE, \ +} + +enum { SCIFA0, SCIFA1, SCIFB0, SCIFB1, SCIFB2, SCIFA2, SCIF0, SCIF1, + SCIF2, SCIF3, SCIF4, SCIF5, SCIFA3, SCIFA4, SCIFA5 }; + +static const struct plat_sci_port scif[] __initconst = { + SCIFA_DATA(SCIFA0, 0xe6c40000, gic_spi(144)), /* SCIFA0 */ + SCIFA_DATA(SCIFA1, 0xe6c50000, gic_spi(145)), /* SCIFA1 */ + SCIFB_DATA(SCIFB0, 0xe6c20000, gic_spi(148)), /* SCIFB0 */ + SCIFB_DATA(SCIFB1, 0xe6c30000, gic_spi(149)), /* SCIFB1 */ + SCIFB_DATA(SCIFB2, 0xe6ce0000, gic_spi(150)), /* SCIFB2 */ + SCIFA_DATA(SCIFA2, 0xe6c60000, gic_spi(151)), /* SCIFA2 */ + SCIF_DATA(SCIF0, 0xe6e60000, gic_spi(152)), /* SCIF0 */ + SCIF_DATA(SCIF1, 0xe6e68000, gic_spi(153)), /* SCIF1 */ + SCIF_DATA(SCIF2, 0xe6e58000, gic_spi(22)), /* SCIF2 */ + SCIF_DATA(SCIF3, 0xe6ea8000, gic_spi(23)), /* SCIF3 */ + SCIF_DATA(SCIF4, 0xe6ee0000, gic_spi(24)), /* SCIF4 */ + SCIF_DATA(SCIF5, 0xe6ee8000, gic_spi(25)), /* SCIF5 */ + SCIFA_DATA(SCIFA3, 0xe6c70000, gic_spi(29)), /* SCIFA3 */ + SCIFA_DATA(SCIFA4, 0xe6c78000, gic_spi(30)), /* SCIFA4 */ + SCIFA_DATA(SCIFA5, 0xe6c80000, gic_spi(31)), /* SCIFA5 */ +}; + +static inline void r8a7791_register_scif(int idx) +{ + platform_device_register_data(&platform_bus, "sh-sci", idx, &scif[idx], + sizeof(struct plat_sci_port)); +} + +static const struct sh_timer_config cmt00_platform_data __initconst = { + .name = "CMT00", + .timer_bit = 0, + .clockevent_rating = 80, +}; + +static const struct resource cmt00_resources[] __initconst = { + DEFINE_RES_MEM(0xffca0510, 0x0c), + DEFINE_RES_MEM(0xffca0500, 0x04), + DEFINE_RES_IRQ(gic_spi(142)), /* CMT0_0 */ +}; + +#define r8a7791_register_cmt(idx) \ + platform_device_register_resndata(&platform_bus, "sh_cmt", \ + idx, cmt##idx##_resources, \ + ARRAY_SIZE(cmt##idx##_resources), \ + &cmt##idx##_platform_data, \ + sizeof(struct sh_timer_config)) + +static struct renesas_irqc_config irqc0_data = { + .irq_base = irq_pin(0), /* IRQ0 -> IRQ9 */ +}; + +static struct resource irqc0_resources[] = { + DEFINE_RES_MEM(0xe61c0000, 0x200), /* IRQC Event Detector Block_0 */ + DEFINE_RES_IRQ(gic_spi(0)), /* IRQ0 */ + DEFINE_RES_IRQ(gic_spi(1)), /* IRQ1 */ + DEFINE_RES_IRQ(gic_spi(2)), /* IRQ2 */ + DEFINE_RES_IRQ(gic_spi(3)), /* IRQ3 */ + DEFINE_RES_IRQ(gic_spi(12)), /* IRQ4 */ + DEFINE_RES_IRQ(gic_spi(13)), /* IRQ5 */ + DEFINE_RES_IRQ(gic_spi(14)), /* IRQ6 */ + DEFINE_RES_IRQ(gic_spi(15)), /* IRQ7 */ + DEFINE_RES_IRQ(gic_spi(16)), /* IRQ8 */ + DEFINE_RES_IRQ(gic_spi(17)), /* IRQ9 */ +}; + +#define r8a7791_register_irqc(idx) \ + platform_device_register_resndata(&platform_bus, "renesas_irqc", \ + idx, irqc##idx##_resources, \ + ARRAY_SIZE(irqc##idx##_resources), \ + &irqc##idx##_data, \ + sizeof(struct renesas_irqc_config)) + +void __init r8a7791_add_dt_devices(void) +{ + r8a7791_register_scif(SCIFA0); + r8a7791_register_scif(SCIFA1); + r8a7791_register_scif(SCIFB0); + r8a7791_register_scif(SCIFB1); + r8a7791_register_scif(SCIFB2); + r8a7791_register_scif(SCIFA2); + r8a7791_register_scif(SCIF0); + r8a7791_register_scif(SCIF1); + r8a7791_register_scif(SCIF2); + r8a7791_register_scif(SCIF3); + r8a7791_register_scif(SCIF4); + r8a7791_register_scif(SCIF5); + r8a7791_register_scif(SCIFA3); + r8a7791_register_scif(SCIFA4); + r8a7791_register_scif(SCIFA5); + r8a7791_register_cmt(00); +} + +void __init r8a7791_add_standard_devices(void) +{ + r8a7791_add_dt_devices(); + r8a7791_register_irqc(0); +} + +void __init r8a7791_init_early(void) +{ +#ifndef CONFIG_ARM_ARCH_TIMER + shmobile_setup_delay(1300, 2, 4); /* Cortex-A15 @ 1300MHz */ +#endif +} + +#ifdef CONFIG_USE_OF +static const char *r8a7791_boards_compat_dt[] __initdata = { + "renesas,r8a7791", + NULL, +}; + +DT_MACHINE_START(R8A7791_DT, "Generic R8A7791 (Flattened Device Tree)") + .smp = smp_ops(r8a7791_smp_ops), + .init_early = r8a7791_init_early, + .init_time = rcar_gen2_timer_init, + .dt_compat = r8a7791_boards_compat_dt, +MACHINE_END +#endif /* CONFIG_USE_OF */ diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c new file mode 100644 index 00000000000..5734c24bf6c --- /dev/null +++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c @@ -0,0 +1,91 @@ +/* + * R-Car Generation 2 support + * + * Copyright (C) 2013 Renesas Solutions Corp. + * Copyright (C) 2013 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/clocksource.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <mach/common.h> +#include <mach/rcar-gen2.h> +#include <asm/mach/arch.h> + +#define MODEMR 0xe6160060 + +u32 __init rcar_gen2_read_mode_pins(void) +{ + void __iomem *modemr = ioremap_nocache(MODEMR, 4); + u32 mode; + + BUG_ON(!modemr); + mode = ioread32(modemr); + iounmap(modemr); + + return mode; +} + +#define CNTCR 0 +#define CNTFID0 0x20 + +void __init rcar_gen2_timer_init(void) +{ +#ifdef CONFIG_ARM_ARCH_TIMER + u32 mode = rcar_gen2_read_mode_pins(); + void __iomem *base; + int extal_mhz = 0; + u32 freq; + + /* At Linux boot time the r8a7790 arch timer comes up + * with the counter disabled. Moreover, it may also report + * a potentially incorrect fixed 13 MHz frequency. To be + * correct these registers need to be updated to use the + * frequency EXTAL / 2 which can be determined by the MD pins. + */ + + switch (mode & (MD(14) | MD(13))) { + case 0: + extal_mhz = 15; + break; + case MD(13): + extal_mhz = 20; + break; + case MD(14): + extal_mhz = 26; + break; + case MD(13) | MD(14): + extal_mhz = 30; + break; + } + + /* The arch timer frequency equals EXTAL / 2 */ + freq = extal_mhz * (1000000 / 2); + + /* Remap "armgcnt address map" space */ + base = ioremap(0xe6080000, PAGE_SIZE); + + /* Update registers with correct frequency */ + iowrite32(freq, base + CNTFID0); + asm volatile("mcr p15, 0, %0, c14, c0, 0" : : "r" (freq)); + + /* make sure arch timer is started by setting bit 0 of CNTCR */ + iowrite32(1, base + CNTCR); + iounmap(base); +#endif /* CONFIG_ARM_ARCH_TIMER */ + + clocksource_of_init(); +} diff --git a/arch/arm/mach-shmobile/smp-emev2.c b/arch/arm/mach-shmobile/smp-emev2.c index 522de5ebb55..f2ca92308f7 100644 --- a/arch/arm/mach-shmobile/smp-emev2.c +++ b/arch/arm/mach-shmobile/smp-emev2.c @@ -34,12 +34,6 @@ static int emev2_boot_secondary(unsigned int cpu, struct task_struct *idle) { - int ret; - - ret = shmobile_smp_scu_boot_secondary(cpu, idle); - if (ret) - return ret; - arch_send_wakeup_ipi_mask(cpumask_of(cpu_logical_map(cpu))); return 0; } diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c index 0f05e9fb722..627c1f0d947 100644 --- a/arch/arm/mach-shmobile/smp-r8a7779.c +++ b/arch/arm/mach-shmobile/smp-r8a7779.c @@ -87,10 +87,6 @@ static int r8a7779_boot_secondary(unsigned int cpu, struct task_struct *idle) unsigned int lcpu = cpu_logical_map(cpu); int ret; - ret = shmobile_smp_scu_boot_secondary(cpu, idle); - if (ret) - return ret; - if (lcpu < ARRAY_SIZE(r8a7779_ch_cpu)) ch = r8a7779_ch_cpu[lcpu]; diff --git a/arch/arm/mach-shmobile/smp-r8a7790.c b/arch/arm/mach-shmobile/smp-r8a7790.c new file mode 100644 index 00000000000..015e2753de1 --- /dev/null +++ b/arch/arm/mach-shmobile/smp-r8a7790.c @@ -0,0 +1,67 @@ +/* + * SMP support for r8a7790 + * + * Copyright (C) 2012-2013 Renesas Solutions Corp. + * Copyright (C) 2012 Takashi Yoshii <takashi.yoshii.ze@renesas.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/smp.h> +#include <linux/io.h> +#include <asm/smp_plat.h> +#include <mach/common.h> + +#define RST 0xe6160000 +#define CA15BAR 0x0020 +#define CA7BAR 0x0030 +#define CA15RESCNT 0x0040 +#define CA7RESCNT 0x0044 +#define MERAM 0xe8080000 + +static void __init r8a7790_smp_prepare_cpus(unsigned int max_cpus) +{ + void __iomem *p; + u32 bar; + + /* let APMU code install data related to shmobile_boot_vector */ + shmobile_smp_apmu_prepare_cpus(max_cpus); + + /* MERAM for jump stub, because BAR requires 256KB aligned address */ + p = ioremap_nocache(MERAM, shmobile_boot_size); + memcpy_toio(p, shmobile_boot_vector, shmobile_boot_size); + iounmap(p); + + /* setup reset vectors */ + p = ioremap_nocache(RST, 0x63); + bar = (MERAM >> 8) & 0xfffffc00; + writel_relaxed(bar, p + CA15BAR); + writel_relaxed(bar, p + CA7BAR); + writel_relaxed(bar | 0x10, p + CA15BAR); + writel_relaxed(bar | 0x10, p + CA7BAR); + + /* enable clocks to all CPUs */ + writel_relaxed((readl_relaxed(p + CA15RESCNT) & ~0x0f) | 0xa5a50000, + p + CA15RESCNT); + writel_relaxed((readl_relaxed(p + CA7RESCNT) & ~0x0f) | 0x5a5a0000, + p + CA7RESCNT); + iounmap(p); +} + +struct smp_operations r8a7790_smp_ops __initdata = { + .smp_prepare_cpus = r8a7790_smp_prepare_cpus, + .smp_boot_secondary = shmobile_smp_apmu_boot_secondary, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_disable = shmobile_smp_cpu_disable, + .cpu_die = shmobile_smp_apmu_cpu_die, + .cpu_kill = shmobile_smp_apmu_cpu_kill, +#endif +}; diff --git a/arch/arm/mach-shmobile/smp-r8a7791.c b/arch/arm/mach-shmobile/smp-r8a7791.c new file mode 100644 index 00000000000..2df5bd190fe --- /dev/null +++ b/arch/arm/mach-shmobile/smp-r8a7791.c @@ -0,0 +1,62 @@ +/* + * SMP support for r8a7791 + * + * Copyright (C) 2013 Renesas Solutions Corp. + * Copyright (C) 2013 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/smp.h> +#include <linux/io.h> +#include <asm/smp_plat.h> +#include <mach/common.h> +#include <mach/r8a7791.h> + +#define RST 0xe6160000 +#define CA15BAR 0x0020 +#define CA15RESCNT 0x0040 +#define RAM 0xe6300000 + +static void __init r8a7791_smp_prepare_cpus(unsigned int max_cpus) +{ + void __iomem *p; + u32 bar; + + /* let APMU code install data related to shmobile_boot_vector */ + shmobile_smp_apmu_prepare_cpus(max_cpus); + + /* RAM for jump stub, because BAR requires 256KB aligned address */ + p = ioremap_nocache(RAM, shmobile_boot_size); + memcpy_toio(p, shmobile_boot_vector, shmobile_boot_size); + iounmap(p); + + /* setup reset vectors */ + p = ioremap_nocache(RST, 0x63); + bar = (RAM >> 8) & 0xfffffc00; + writel_relaxed(bar, p + CA15BAR); + writel_relaxed(bar | 0x10, p + CA15BAR); + + /* enable clocks to all CPUs */ + writel_relaxed((readl_relaxed(p + CA15RESCNT) & ~0x0f) | 0xa5a50000, + p + CA15RESCNT); + iounmap(p); +} + +struct smp_operations r8a7791_smp_ops __initdata = { + .smp_prepare_cpus = r8a7791_smp_prepare_cpus, + .smp_boot_secondary = shmobile_smp_apmu_boot_secondary, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_disable = shmobile_smp_cpu_disable, + .cpu_die = shmobile_smp_apmu_cpu_die, + .cpu_kill = shmobile_smp_apmu_cpu_kill, +#endif +}; diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c index 0baa2444379..13ba36a6831 100644 --- a/arch/arm/mach-shmobile/smp-sh73a0.c +++ b/arch/arm/mach-shmobile/smp-sh73a0.c @@ -46,11 +46,6 @@ void __init sh73a0_register_twd(void) static int sh73a0_boot_secondary(unsigned int cpu, struct task_struct *idle) { unsigned int lcpu = cpu_logical_map(cpu); - int ret; - - ret = shmobile_smp_scu_boot_secondary(cpu, idle); - if (ret) - return ret; if (((__raw_readl(PSTR) >> (4 * lcpu)) & 3) == 3) __raw_writel(1 << lcpu, WUPCR); /* wake up */ @@ -71,18 +66,11 @@ static void __init sh73a0_smp_prepare_cpus(unsigned int max_cpus) shmobile_smp_scu_prepare_cpus(max_cpus); } -#ifdef CONFIG_HOTPLUG_CPU -static int sh73a0_cpu_disable(unsigned int cpu) -{ - return 0; /* CPU0 and CPU1 supported */ -} -#endif /* CONFIG_HOTPLUG_CPU */ - struct smp_operations sh73a0_smp_ops __initdata = { .smp_prepare_cpus = sh73a0_smp_prepare_cpus, .smp_boot_secondary = sh73a0_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU - .cpu_disable = sh73a0_cpu_disable, + .cpu_disable = shmobile_smp_cpu_disable, .cpu_die = shmobile_smp_scu_cpu_die, .cpu_kill = shmobile_smp_scu_cpu_kill, #endif diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig index dd86db46752..037100a1563 100644 --- a/arch/arm/mach-socfpga/Kconfig +++ b/arch/arm/mach-socfpga/Kconfig @@ -4,7 +4,6 @@ config ARCH_SOCFPGA select ARM_AMBA select ARM_GIC select CACHE_L2X0 - select CLKDEV_LOOKUP select COMMON_CLK select CPU_V7 select DW_APB_TIMER_OF diff --git a/arch/arm/mach-socfpga/socfpga.c b/arch/arm/mach-socfpga/socfpga.c index bfce9641e32..dd0d49cdbe0 100644 --- a/arch/arm/mach-socfpga/socfpga.c +++ b/arch/arm/mach-socfpga/socfpga.c @@ -14,7 +14,6 @@ * You should have received a copy of the GNU General Public License * along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#include <linux/clk-provider.h> #include <linux/irqchip.h> #include <linux/of_address.h> #include <linux/of_irq.h> @@ -107,7 +106,6 @@ static void __init socfpga_cyclone5_init(void) { l2x0_of_init(0, ~0UL); of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); - of_clk_init(NULL); socfpga_init_clocks(); } diff --git a/arch/arm/mach-spear/Kconfig b/arch/arm/mach-spear/Kconfig index df0d59afeb4..ac1710e64d9 100644 --- a/arch/arm/mach-spear/Kconfig +++ b/arch/arm/mach-spear/Kconfig @@ -7,11 +7,9 @@ menuconfig PLAT_SPEAR default PLAT_SPEAR_SINGLE select ARCH_REQUIRE_GPIOLIB select ARM_AMBA - select CLKDEV_LOOKUP select CLKSRC_MMIO select COMMON_CLK select GENERIC_CLOCKEVENTS - select HAVE_CLK if PLAT_SPEAR diff --git a/arch/arm/mach-sti/board-dt.c b/arch/arm/mach-sti/board-dt.c index 8fe6f0c4648..1217fb598cf 100644 --- a/arch/arm/mach-sti/board-dt.c +++ b/arch/arm/mach-sti/board-dt.c @@ -7,9 +7,8 @@ * published by the Free Software Foundation. */ -#include <linux/clk-provider.h> -#include <linux/clocksource.h> #include <linux/irq.h> +#include <linux/of_platform.h> #include <asm/hardware/cache-l2x0.h> #include <asm/mach/arch.h> @@ -28,11 +27,10 @@ void __init stih41x_l2x0_init(void) l2x0_of_init(aux_ctrl, L2X0_AUX_CTRL_MASK); } -static void __init stih41x_timer_init(void) +static void __init stih41x_machine_init(void) { - of_clk_init(NULL); - clocksource_of_init(); stih41x_l2x0_init(); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } static const char *stih41x_dt_match[] __initdata = { @@ -42,7 +40,7 @@ static const char *stih41x_dt_match[] __initdata = { }; DT_MACHINE_START(STM, "STiH415/416 SoC with Flattened Device Tree") - .init_time = stih41x_timer_init, + .init_machine = stih41x_machine_init, .smp = smp_ops(sti_smp_ops), .dt_compat = stih41x_dt_match, MACHINE_END diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index 3ab2f65f8a5..c9e72c89066 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -1,14 +1,14 @@ config ARCH_SUNXI bool "Allwinner A1X SOCs" if ARCH_MULTI_V7 select ARCH_REQUIRE_GPIOLIB + select ARM_GIC select CLKSRC_MMIO select CLKSRC_OF select COMMON_CLK select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP + select HAVE_SMP select PINCTRL + select PINCTRL_SUNXI select SPARSE_IRQ select SUN4I_TIMER - select PINCTRL_SUNXI - select ARM_GIC - select HAVE_SMP diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c index e79fb346934..61d3a387f01 100644 --- a/arch/arm/mach-sunxi/sunxi.c +++ b/arch/arm/mach-sunxi/sunxi.c @@ -10,7 +10,6 @@ * warranty of any kind, whether express or implied. */ -#include <linux/clocksource.h> #include <linux/delay.h> #include <linux/kernel.h> #include <linux/init.h> @@ -20,8 +19,6 @@ #include <linux/io.h> #include <linux/reboot.h> -#include <linux/clk/sunxi.h> - #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/system_misc.h> @@ -93,14 +90,13 @@ static void sun6i_restart(enum reboot_mode mode, const char *cmd) } static struct of_device_id sunxi_restart_ids[] = { - { .compatible = "allwinner,sun4i-wdt", .data = sun4i_restart }, - { .compatible = "allwinner,sun6i-wdt", .data = sun6i_restart }, + { .compatible = "allwinner,sun4i-wdt" }, + { .compatible = "allwinner,sun6i-wdt" }, { /*sentinel*/ } }; static void sunxi_setup_restart(void) { - const struct of_device_id *of_id; struct device_node *np; np = of_find_matching_node(NULL, sunxi_restart_ids); @@ -109,17 +105,6 @@ static void sunxi_setup_restart(void) wdt_base = of_iomap(np, 0); WARN(!wdt_base, "failed to map watchdog base address"); - - of_id = of_match_node(sunxi_restart_ids, np); - WARN(!of_id, "restart function not available"); - - arm_pm_restart = of_id->data; -} - -static void __init sunxi_timer_init(void) -{ - sunxi_init_clocks(); - clocksource_of_init(); } static void __init sunxi_dt_init(void) @@ -133,13 +118,33 @@ static const char * const sunxi_board_dt_compat[] = { "allwinner,sun4i-a10", "allwinner,sun5i-a10s", "allwinner,sun5i-a13", - "allwinner,sun6i-a31", - "allwinner,sun7i-a20", NULL, }; DT_MACHINE_START(SUNXI_DT, "Allwinner A1X (Device Tree)") .init_machine = sunxi_dt_init, - .init_time = sunxi_timer_init, .dt_compat = sunxi_board_dt_compat, + .restart = sun4i_restart, +MACHINE_END + +static const char * const sun6i_board_dt_compat[] = { + "allwinner,sun6i-a31", + NULL, +}; + +DT_MACHINE_START(SUN6I_DT, "Allwinner sun6i (A31) Family") + .init_machine = sunxi_dt_init, + .dt_compat = sun6i_board_dt_compat, + .restart = sun6i_restart, +MACHINE_END + +static const char * const sun7i_board_dt_compat[] = { + "allwinner,sun7i-a20", + NULL, +}; + +DT_MACHINE_START(SUN7I_DT, "Allwinner sun7i (A20) Family") + .init_machine = sunxi_dt_init, + .dt_compat = sun7i_board_dt_compat, + .restart = sun4i_restart, MACHINE_END diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index 67a76f2dfb9..0bf04a0bca9 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -3,7 +3,6 @@ config ARCH_TEGRA select ARCH_HAS_CPUFREQ select ARCH_REQUIRE_GPIOLIB select ARM_GIC - select CLKDEV_LOOKUP select CLKSRC_MMIO select CLKSRC_OF select COMMON_CLK @@ -11,7 +10,6 @@ config ARCH_TEGRA select GENERIC_CLOCKEVENTS select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP - select HAVE_CLK select HAVE_SMP select MIGHT_HAVE_CACHE_L2X0 select MIGHT_HAVE_PCI @@ -53,14 +51,22 @@ config ARCH_TEGRA_3x_SOC config ARCH_TEGRA_114_SOC bool "Enable support for Tegra114 family" - select HAVE_ARM_ARCH_TIMER select ARM_ERRATA_798181 select ARM_L1_CACHE_SHIFT_6 + select HAVE_ARM_ARCH_TIMER select PINCTRL_TEGRA114 help Support for NVIDIA Tegra T114 processor family, based on the ARM CortexA15MP CPU +config ARCH_TEGRA_124_SOC + bool "Enable support for Tegra124 family" + select ARM_L1_CACHE_SHIFT_6 + select HAVE_ARM_ARCH_TIMER + help + Support for NVIDIA Tegra T124 processor family, based on the + ARM CortexA15MP CPU + config TEGRA_AHB bool "Enable AHB driver for NVIDIA Tegra SoCs" default y diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile index e7e5f45c655..019bb175866 100644 --- a/arch/arm/mach-tegra/Makefile +++ b/arch/arm/mach-tegra/Makefile @@ -1,6 +1,5 @@ asflags-y += -march=armv7-a -obj-y += common.o obj-y += io.o obj-y += irq.o obj-y += fuse.o @@ -36,5 +35,10 @@ obj-$(CONFIG_ARCH_TEGRA_114_SOC) += pm-tegra30.o ifeq ($(CONFIG_CPU_IDLE),y) obj-$(CONFIG_ARCH_TEGRA_114_SOC) += cpuidle-tegra114.o endif +obj-$(CONFIG_ARCH_TEGRA_124_SOC) += sleep-tegra30.o +obj-$(CONFIG_ARCH_TEGRA_124_SOC) += pm-tegra30.o +ifeq ($(CONFIG_CPU_IDLE),y) +obj-$(CONFIG_ARCH_TEGRA_124_SOC) += cpuidle-tegra114.o +endif obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += board-paz00.o diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c index 740e16f6472..06f024070da 100644 --- a/arch/arm/mach-tegra/board-paz00.c +++ b/arch/arm/mach-tegra/board-paz00.c @@ -20,12 +20,11 @@ #include <linux/platform_device.h> #include <linux/rfkill-gpio.h> #include "board.h" -#include "board-paz00.h" static struct rfkill_gpio_platform_data wifi_rfkill_platform_data = { .name = "wifi_rfkill", - .reset_gpio = TEGRA_WIFI_RST, - .shutdown_gpio = TEGRA_WIFI_PWRN, + .reset_gpio = 25, /* PD1 */ + .shutdown_gpio = 85, /* PK5 */ .type = RFKILL_TYPE_WLAN, }; diff --git a/arch/arm/mach-tegra/board-paz00.h b/arch/arm/mach-tegra/board-paz00.h deleted file mode 100644 index 25c08ecef52..00000000000 --- a/arch/arm/mach-tegra/board-paz00.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * arch/arm/mach-tegra/board-paz00.h - * - * Copyright (C) 2010 Marc Dietrich <marvin24@gmx.de> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef _MACH_TEGRA_BOARD_PAZ00_H -#define _MACH_TEGRA_BOARD_PAZ00_H - -#include "gpio-names.h" - -#define TEGRA_WIFI_PWRN TEGRA_GPIO_PK5 -#define TEGRA_WIFI_RST TEGRA_GPIO_PD1 - -#endif diff --git a/arch/arm/mach-tegra/board.h b/arch/arm/mach-tegra/board.h index db6810dc0b3..bcf5dbf69d5 100644 --- a/arch/arm/mach-tegra/board.h +++ b/arch/arm/mach-tegra/board.h @@ -25,20 +25,8 @@ #include <linux/types.h> #include <linux/reboot.h> -void tegra_assert_system_reset(enum reboot_mode mode, const char *cmd); - -void __init tegra_init_early(void); void __init tegra_map_common_io(void); void __init tegra_init_irq(void); -void __init tegra_dt_init_irq(void); - -void tegra_init_late(void); - -#ifdef CONFIG_DEBUG_FS -int tegra_clk_debugfs_init(void); -#else -static inline int tegra_clk_debugfs_init(void) { return 0; } -#endif int __init tegra_powergate_init(void); #if defined(CONFIG_ARCH_TEGRA_2x_SOC) && defined(CONFIG_DEBUG_FS) diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c deleted file mode 100644 index 94a119a35af..00000000000 --- a/arch/arm/mach-tegra/common.c +++ /dev/null @@ -1,115 +0,0 @@ -/* - * arch/arm/mach-tegra/common.c - * - * Copyright (c) 2013 NVIDIA Corporation. All rights reserved. - * Copyright (C) 2010 Google, Inc. - * - * Author: - * Colin Cross <ccross@android.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/init.h> -#include <linux/io.h> -#include <linux/clk.h> -#include <linux/delay.h> -#include <linux/reboot.h> -#include <linux/irqchip.h> -#include <linux/clk-provider.h> - -#include <asm/hardware/cache-l2x0.h> - -#include "board.h" -#include "common.h" -#include "cpuidle.h" -#include "fuse.h" -#include "iomap.h" -#include "irq.h" -#include "pmc.h" -#include "apbio.h" -#include "sleep.h" -#include "pm.h" -#include "reset.h" - -/* - * Storage for debug-macro.S's state. - * - * This must be in .data not .bss so that it gets initialized each time the - * kernel is loaded. The data is declared here rather than debug-macro.S so - * that multiple inclusions of debug-macro.S point at the same data. - */ -u32 tegra_uart_config[4] = { - /* Debug UART initialization required */ - 1, - /* Debug UART physical address */ - 0, - /* Debug UART virtual address */ - 0, - /* Scratch space for debug macro */ - 0, -}; - -#ifdef CONFIG_OF -void __init tegra_dt_init_irq(void) -{ - of_clk_init(NULL); - tegra_pmc_init(); - tegra_init_irq(); - irqchip_init(); - tegra_legacy_irq_syscore_init(); -} -#endif - -void tegra_assert_system_reset(enum reboot_mode mode, const char *cmd) -{ - void __iomem *reset = IO_ADDRESS(TEGRA_PMC_BASE + 0); - u32 reg; - - reg = readl_relaxed(reset); - reg |= 0x10; - writel_relaxed(reg, reset); -} - -static void __init tegra_init_cache(void) -{ -#ifdef CONFIG_CACHE_L2X0 - int ret; - void __iomem *p = IO_ADDRESS(TEGRA_ARM_PERIF_BASE) + 0x3000; - u32 aux_ctrl, cache_type; - - cache_type = readl(p + L2X0_CACHE_TYPE); - aux_ctrl = (cache_type & 0x700) << (17-8); - aux_ctrl |= 0x7C400001; - - ret = l2x0_of_init(aux_ctrl, 0x8200c3fe); - if (!ret) - l2x0_saved_regs_addr = virt_to_phys(&l2x0_saved_regs); -#endif - -} - -void __init tegra_init_early(void) -{ - tegra_cpu_reset_handler_init(); - tegra_apb_io_init(); - tegra_init_fuse(); - tegra_init_cache(); - tegra_powergate_init(); - tegra_hotplug_init(); -} - -void __init tegra_init_late(void) -{ - tegra_init_suspend(); - tegra_cpuidle_init(); - tegra_powergate_debugfs_init(); -} diff --git a/arch/arm/mach-tegra/cpuidle.c b/arch/arm/mach-tegra/cpuidle.c index 0961dfcf83a..7bc5d8d667f 100644 --- a/arch/arm/mach-tegra/cpuidle.c +++ b/arch/arm/mach-tegra/cpuidle.c @@ -39,7 +39,9 @@ void __init tegra_cpuidle_init(void) tegra30_cpuidle_init(); break; case TEGRA114: - if (IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC)) + case TEGRA124: + if (IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC) || + IS_ENABLED(CONFIG_ARCH_TEGRA_124_SOC)) tegra114_cpuidle_init(); break; } diff --git a/arch/arm/mach-tegra/flowctrl.c b/arch/arm/mach-tegra/flowctrl.c index 5348543382b..ce8ab8abf06 100644 --- a/arch/arm/mach-tegra/flowctrl.c +++ b/arch/arm/mach-tegra/flowctrl.c @@ -87,6 +87,7 @@ void flowctrl_cpu_suspend_enter(unsigned int cpuid) break; case TEGRA30: case TEGRA114: + case TEGRA124: /* clear wfe bitmap */ reg &= ~TEGRA30_FLOW_CTRL_CSR_WFE_BITMAP; /* clear wfi bitmap */ @@ -125,6 +126,7 @@ void flowctrl_cpu_suspend_exit(unsigned int cpuid) break; case TEGRA30: case TEGRA114: + case TEGRA124: /* clear wfe bitmap */ reg &= ~TEGRA30_FLOW_CTRL_CSR_WFE_BITMAP; /* clear wfi bitmap */ diff --git a/arch/arm/mach-tegra/fuse.c b/arch/arm/mach-tegra/fuse.c index e035cd284a6..d4639c50662 100644 --- a/arch/arm/mach-tegra/fuse.c +++ b/arch/arm/mach-tegra/fuse.c @@ -21,14 +21,26 @@ #include <linux/kernel.h> #include <linux/io.h> #include <linux/export.h> +#include <linux/random.h> #include <linux/tegra-soc.h> #include "fuse.h" #include "iomap.h" #include "apbio.h" +/* Tegra20 only */ #define FUSE_UID_LOW 0x108 #define FUSE_UID_HIGH 0x10c + +/* Tegra30 and later */ +#define FUSE_VENDOR_CODE 0x200 +#define FUSE_FAB_CODE 0x204 +#define FUSE_LOT_CODE_0 0x208 +#define FUSE_LOT_CODE_1 0x20c +#define FUSE_WAFER_ID 0x210 +#define FUSE_X_COORDINATE 0x214 +#define FUSE_Y_COORDINATE 0x218 + #define FUSE_SKU_INFO 0x110 #define TEGRA20_FUSE_SPARE_BIT 0x200 @@ -112,21 +124,51 @@ u32 tegra_read_chipid(void) return readl_relaxed(IO_ADDRESS(TEGRA_APB_MISC_BASE) + 0x804); } -void tegra_init_fuse(void) +static void __init tegra20_fuse_init_randomness(void) +{ + u32 randomness[2]; + + randomness[0] = tegra_fuse_readl(FUSE_UID_LOW); + randomness[1] = tegra_fuse_readl(FUSE_UID_HIGH); + + add_device_randomness(randomness, sizeof(randomness)); +} + +/* Applies to Tegra30 or later */ +static void __init tegra30_fuse_init_randomness(void) +{ + u32 randomness[7]; + + randomness[0] = tegra_fuse_readl(FUSE_VENDOR_CODE); + randomness[1] = tegra_fuse_readl(FUSE_FAB_CODE); + randomness[2] = tegra_fuse_readl(FUSE_LOT_CODE_0); + randomness[3] = tegra_fuse_readl(FUSE_LOT_CODE_1); + randomness[4] = tegra_fuse_readl(FUSE_WAFER_ID); + randomness[5] = tegra_fuse_readl(FUSE_X_COORDINATE); + randomness[6] = tegra_fuse_readl(FUSE_Y_COORDINATE); + + add_device_randomness(randomness, sizeof(randomness)); +} + +void __init tegra_init_fuse(void) { u32 id; + u32 randomness[5]; u32 reg = readl(IO_ADDRESS(TEGRA_CLK_RESET_BASE + 0x48)); reg |= 1 << 28; writel(reg, IO_ADDRESS(TEGRA_CLK_RESET_BASE + 0x48)); reg = tegra_fuse_readl(FUSE_SKU_INFO); + randomness[0] = reg; tegra_sku_id = reg & 0xFF; reg = tegra_apb_readl(TEGRA_APB_MISC_BASE + STRAP_OPT); + randomness[1] = reg; tegra_bct_strapping = (reg & RAM_ID_MASK) >> RAM_CODE_SHIFT; id = tegra_read_chipid(); + randomness[2] = id; tegra_chip_id = (id >> 8) & 0xff; switch (tegra_chip_id) { @@ -149,6 +191,18 @@ void tegra_init_fuse(void) tegra_revision = tegra_get_revision(id); tegra_init_speedo_data(); + randomness[3] = (tegra_cpu_process_id << 16) | tegra_core_process_id; + randomness[4] = (tegra_cpu_speedo_id << 16) | tegra_soc_speedo_id; + + add_device_randomness(randomness, sizeof(randomness)); + switch (tegra_chip_id) { + case TEGRA20: + tegra20_fuse_init_randomness(); + case TEGRA30: + case TEGRA114: + default: + tegra30_fuse_init_randomness(); + } pr_info("Tegra Revision: %s SKU: %d CPU Process: %d Core Process: %d\n", tegra_revision_name[tegra_revision], diff --git a/arch/arm/mach-tegra/fuse.h b/arch/arm/mach-tegra/fuse.h index def79683bef..c01d04785d6 100644 --- a/arch/arm/mach-tegra/fuse.h +++ b/arch/arm/mach-tegra/fuse.h @@ -29,6 +29,7 @@ #define TEGRA20 0x20 #define TEGRA30 0x30 #define TEGRA114 0x35 +#define TEGRA124 0x40 #ifndef __ASSEMBLY__ enum tegra_revision { diff --git a/arch/arm/mach-tegra/gpio-names.h b/arch/arm/mach-tegra/gpio-names.h deleted file mode 100644 index f28220a641b..00000000000 --- a/arch/arm/mach-tegra/gpio-names.h +++ /dev/null @@ -1,247 +0,0 @@ -/* - * arch/arm/mach-tegra/include/mach/gpio-names.h - * - * Copyright (c) 2010 Google, Inc - * - * Author: - * Erik Gilling <konkers@google.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __MACH_TEGRA_GPIO_NAMES_H -#define __MACH_TEGRA_GPIO_NAMES_H - -#define TEGRA_GPIO_PA0 0 -#define TEGRA_GPIO_PA1 1 -#define TEGRA_GPIO_PA2 2 -#define TEGRA_GPIO_PA3 3 -#define TEGRA_GPIO_PA4 4 -#define TEGRA_GPIO_PA5 5 -#define TEGRA_GPIO_PA6 6 -#define TEGRA_GPIO_PA7 7 -#define TEGRA_GPIO_PB0 8 -#define TEGRA_GPIO_PB1 9 -#define TEGRA_GPIO_PB2 10 -#define TEGRA_GPIO_PB3 11 -#define TEGRA_GPIO_PB4 12 -#define TEGRA_GPIO_PB5 13 -#define TEGRA_GPIO_PB6 14 -#define TEGRA_GPIO_PB7 15 -#define TEGRA_GPIO_PC0 16 -#define TEGRA_GPIO_PC1 17 -#define TEGRA_GPIO_PC2 18 -#define TEGRA_GPIO_PC3 19 -#define TEGRA_GPIO_PC4 20 -#define TEGRA_GPIO_PC5 21 -#define TEGRA_GPIO_PC6 22 -#define TEGRA_GPIO_PC7 23 -#define TEGRA_GPIO_PD0 24 -#define TEGRA_GPIO_PD1 25 -#define TEGRA_GPIO_PD2 26 -#define TEGRA_GPIO_PD3 27 -#define TEGRA_GPIO_PD4 28 -#define TEGRA_GPIO_PD5 29 -#define TEGRA_GPIO_PD6 30 -#define TEGRA_GPIO_PD7 31 -#define TEGRA_GPIO_PE0 32 -#define TEGRA_GPIO_PE1 33 -#define TEGRA_GPIO_PE2 34 -#define TEGRA_GPIO_PE3 35 -#define TEGRA_GPIO_PE4 36 -#define TEGRA_GPIO_PE5 37 -#define TEGRA_GPIO_PE6 38 -#define TEGRA_GPIO_PE7 39 -#define TEGRA_GPIO_PF0 40 -#define TEGRA_GPIO_PF1 41 -#define TEGRA_GPIO_PF2 42 -#define TEGRA_GPIO_PF3 43 -#define TEGRA_GPIO_PF4 44 -#define TEGRA_GPIO_PF5 45 -#define TEGRA_GPIO_PF6 46 -#define TEGRA_GPIO_PF7 47 -#define TEGRA_GPIO_PG0 48 -#define TEGRA_GPIO_PG1 49 -#define TEGRA_GPIO_PG2 50 -#define TEGRA_GPIO_PG3 51 -#define TEGRA_GPIO_PG4 52 -#define TEGRA_GPIO_PG5 53 -#define TEGRA_GPIO_PG6 54 -#define TEGRA_GPIO_PG7 55 -#define TEGRA_GPIO_PH0 56 -#define TEGRA_GPIO_PH1 57 -#define TEGRA_GPIO_PH2 58 -#define TEGRA_GPIO_PH3 59 -#define TEGRA_GPIO_PH4 60 -#define TEGRA_GPIO_PH5 61 -#define TEGRA_GPIO_PH6 62 -#define TEGRA_GPIO_PH7 63 -#define TEGRA_GPIO_PI0 64 -#define TEGRA_GPIO_PI1 65 -#define TEGRA_GPIO_PI2 66 -#define TEGRA_GPIO_PI3 67 -#define TEGRA_GPIO_PI4 68 -#define TEGRA_GPIO_PI5 69 -#define TEGRA_GPIO_PI6 70 -#define TEGRA_GPIO_PI7 71 -#define TEGRA_GPIO_PJ0 72 -#define TEGRA_GPIO_PJ1 73 -#define TEGRA_GPIO_PJ2 74 -#define TEGRA_GPIO_PJ3 75 -#define TEGRA_GPIO_PJ4 76 -#define TEGRA_GPIO_PJ5 77 -#define TEGRA_GPIO_PJ6 78 -#define TEGRA_GPIO_PJ7 79 -#define TEGRA_GPIO_PK0 80 -#define TEGRA_GPIO_PK1 81 -#define TEGRA_GPIO_PK2 82 -#define TEGRA_GPIO_PK3 83 -#define TEGRA_GPIO_PK4 84 -#define TEGRA_GPIO_PK5 85 -#define TEGRA_GPIO_PK6 86 -#define TEGRA_GPIO_PK7 87 -#define TEGRA_GPIO_PL0 88 -#define TEGRA_GPIO_PL1 89 -#define TEGRA_GPIO_PL2 90 -#define TEGRA_GPIO_PL3 91 -#define TEGRA_GPIO_PL4 92 -#define TEGRA_GPIO_PL5 93 -#define TEGRA_GPIO_PL6 94 -#define TEGRA_GPIO_PL7 95 -#define TEGRA_GPIO_PM0 96 -#define TEGRA_GPIO_PM1 97 -#define TEGRA_GPIO_PM2 98 -#define TEGRA_GPIO_PM3 99 -#define TEGRA_GPIO_PM4 100 -#define TEGRA_GPIO_PM5 101 -#define TEGRA_GPIO_PM6 102 -#define TEGRA_GPIO_PM7 103 -#define TEGRA_GPIO_PN0 104 -#define TEGRA_GPIO_PN1 105 -#define TEGRA_GPIO_PN2 106 -#define TEGRA_GPIO_PN3 107 -#define TEGRA_GPIO_PN4 108 -#define TEGRA_GPIO_PN5 109 -#define TEGRA_GPIO_PN6 110 -#define TEGRA_GPIO_PN7 111 -#define TEGRA_GPIO_PO0 112 -#define TEGRA_GPIO_PO1 113 -#define TEGRA_GPIO_PO2 114 -#define TEGRA_GPIO_PO3 115 -#define TEGRA_GPIO_PO4 116 -#define TEGRA_GPIO_PO5 117 -#define TEGRA_GPIO_PO6 118 -#define TEGRA_GPIO_PO7 119 -#define TEGRA_GPIO_PP0 120 -#define TEGRA_GPIO_PP1 121 -#define TEGRA_GPIO_PP2 122 -#define TEGRA_GPIO_PP3 123 -#define TEGRA_GPIO_PP4 124 -#define TEGRA_GPIO_PP5 125 -#define TEGRA_GPIO_PP6 126 -#define TEGRA_GPIO_PP7 127 -#define TEGRA_GPIO_PQ0 128 -#define TEGRA_GPIO_PQ1 129 -#define TEGRA_GPIO_PQ2 130 -#define TEGRA_GPIO_PQ3 131 -#define TEGRA_GPIO_PQ4 132 -#define TEGRA_GPIO_PQ5 133 -#define TEGRA_GPIO_PQ6 134 -#define TEGRA_GPIO_PQ7 135 -#define TEGRA_GPIO_PR0 136 -#define TEGRA_GPIO_PR1 137 -#define TEGRA_GPIO_PR2 138 -#define TEGRA_GPIO_PR3 139 -#define TEGRA_GPIO_PR4 140 -#define TEGRA_GPIO_PR5 141 -#define TEGRA_GPIO_PR6 142 -#define TEGRA_GPIO_PR7 143 -#define TEGRA_GPIO_PS0 144 -#define TEGRA_GPIO_PS1 145 -#define TEGRA_GPIO_PS2 146 -#define TEGRA_GPIO_PS3 147 -#define TEGRA_GPIO_PS4 148 -#define TEGRA_GPIO_PS5 149 -#define TEGRA_GPIO_PS6 150 -#define TEGRA_GPIO_PS7 151 -#define TEGRA_GPIO_PT0 152 -#define TEGRA_GPIO_PT1 153 -#define TEGRA_GPIO_PT2 154 -#define TEGRA_GPIO_PT3 155 -#define TEGRA_GPIO_PT4 156 -#define TEGRA_GPIO_PT5 157 -#define TEGRA_GPIO_PT6 158 -#define TEGRA_GPIO_PT7 159 -#define TEGRA_GPIO_PU0 160 -#define TEGRA_GPIO_PU1 161 -#define TEGRA_GPIO_PU2 162 -#define TEGRA_GPIO_PU3 163 -#define TEGRA_GPIO_PU4 164 -#define TEGRA_GPIO_PU5 165 -#define TEGRA_GPIO_PU6 166 -#define TEGRA_GPIO_PU7 167 -#define TEGRA_GPIO_PV0 168 -#define TEGRA_GPIO_PV1 169 -#define TEGRA_GPIO_PV2 170 -#define TEGRA_GPIO_PV3 171 -#define TEGRA_GPIO_PV4 172 -#define TEGRA_GPIO_PV5 173 -#define TEGRA_GPIO_PV6 174 -#define TEGRA_GPIO_PV7 175 -#define TEGRA_GPIO_PW0 176 -#define TEGRA_GPIO_PW1 177 -#define TEGRA_GPIO_PW2 178 -#define TEGRA_GPIO_PW3 179 -#define TEGRA_GPIO_PW4 180 -#define TEGRA_GPIO_PW5 181 -#define TEGRA_GPIO_PW6 182 -#define TEGRA_GPIO_PW7 183 -#define TEGRA_GPIO_PX0 184 -#define TEGRA_GPIO_PX1 185 -#define TEGRA_GPIO_PX2 186 -#define TEGRA_GPIO_PX3 187 -#define TEGRA_GPIO_PX4 188 -#define TEGRA_GPIO_PX5 189 -#define TEGRA_GPIO_PX6 190 -#define TEGRA_GPIO_PX7 191 -#define TEGRA_GPIO_PY0 192 -#define TEGRA_GPIO_PY1 193 -#define TEGRA_GPIO_PY2 194 -#define TEGRA_GPIO_PY3 195 -#define TEGRA_GPIO_PY4 196 -#define TEGRA_GPIO_PY5 197 -#define TEGRA_GPIO_PY6 198 -#define TEGRA_GPIO_PY7 199 -#define TEGRA_GPIO_PZ0 200 -#define TEGRA_GPIO_PZ1 201 -#define TEGRA_GPIO_PZ2 202 -#define TEGRA_GPIO_PZ3 203 -#define TEGRA_GPIO_PZ4 204 -#define TEGRA_GPIO_PZ5 205 -#define TEGRA_GPIO_PZ6 206 -#define TEGRA_GPIO_PZ7 207 -#define TEGRA_GPIO_PAA0 208 -#define TEGRA_GPIO_PAA1 209 -#define TEGRA_GPIO_PAA2 210 -#define TEGRA_GPIO_PAA3 211 -#define TEGRA_GPIO_PAA4 212 -#define TEGRA_GPIO_PAA5 213 -#define TEGRA_GPIO_PAA6 214 -#define TEGRA_GPIO_PAA7 215 -#define TEGRA_GPIO_PBB0 216 -#define TEGRA_GPIO_PBB1 217 -#define TEGRA_GPIO_PBB2 218 -#define TEGRA_GPIO_PBB3 219 -#define TEGRA_GPIO_PBB4 220 -#define TEGRA_GPIO_PBB5 221 -#define TEGRA_GPIO_PBB6 222 -#define TEGRA_GPIO_PBB7 223 - -#endif diff --git a/arch/arm/mach-tegra/hotplug.c b/arch/arm/mach-tegra/hotplug.c index 04de2e86092..ff26af26bd0 100644 --- a/arch/arm/mach-tegra/hotplug.c +++ b/arch/arm/mach-tegra/hotplug.c @@ -57,4 +57,6 @@ void __init tegra_hotplug_init(void) tegra_hotplug_shutdown = tegra30_hotplug_shutdown; if (IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC) && tegra_chip_id == TEGRA114) tegra_hotplug_shutdown = tegra30_hotplug_shutdown; + if (IS_ENABLED(CONFIG_ARCH_TEGRA_124_SOC) && tegra_chip_id == TEGRA124) + tegra_hotplug_shutdown = tegra30_hotplug_shutdown; } diff --git a/arch/arm/mach-tegra/iomap.h b/arch/arm/mach-tegra/iomap.h index 3f5fa0749bd..26b1c2ad0ce 100644 --- a/arch/arm/mach-tegra/iomap.h +++ b/arch/arm/mach-tegra/iomap.h @@ -24,44 +24,12 @@ #define TEGRA_IRAM_BASE 0x40000000 #define TEGRA_IRAM_SIZE SZ_256K -#define TEGRA_IRAM_CODE_AREA (TEGRA_IRAM_BASE + SZ_4K) - -#define TEGRA_HOST1X_BASE 0x50000000 -#define TEGRA_HOST1X_SIZE 0x24000 - #define TEGRA_ARM_PERIF_BASE 0x50040000 #define TEGRA_ARM_PERIF_SIZE SZ_8K -#define TEGRA_ARM_PL310_BASE 0x50043000 -#define TEGRA_ARM_PL310_SIZE SZ_4K - #define TEGRA_ARM_INT_DIST_BASE 0x50041000 #define TEGRA_ARM_INT_DIST_SIZE SZ_4K -#define TEGRA_MPE_BASE 0x54040000 -#define TEGRA_MPE_SIZE SZ_256K - -#define TEGRA_VI_BASE 0x54080000 -#define TEGRA_VI_SIZE SZ_256K - -#define TEGRA_ISP_BASE 0x54100000 -#define TEGRA_ISP_SIZE SZ_256K - -#define TEGRA_DISPLAY_BASE 0x54200000 -#define TEGRA_DISPLAY_SIZE SZ_256K - -#define TEGRA_DISPLAY2_BASE 0x54240000 -#define TEGRA_DISPLAY2_SIZE SZ_256K - -#define TEGRA_HDMI_BASE 0x54280000 -#define TEGRA_HDMI_SIZE SZ_256K - -#define TEGRA_GART_BASE 0x58000000 -#define TEGRA_GART_SIZE SZ_32M - -#define TEGRA_RES_SEMA_BASE 0x60001000 -#define TEGRA_RES_SEMA_SIZE SZ_4K - #define TEGRA_PRIMARY_ICTLR_BASE 0x60004000 #define TEGRA_PRIMARY_ICTLR_SIZE SZ_64 @@ -98,51 +66,15 @@ #define TEGRA_FLOW_CTRL_BASE 0x60007000 #define TEGRA_FLOW_CTRL_SIZE 20 -#define TEGRA_AHB_DMA_BASE 0x60008000 -#define TEGRA_AHB_DMA_SIZE SZ_4K - -#define TEGRA_AHB_DMA_CH0_BASE 0x60009000 -#define TEGRA_AHB_DMA_CH0_SIZE 32 - -#define TEGRA_APB_DMA_BASE 0x6000A000 -#define TEGRA_APB_DMA_SIZE SZ_4K - -#define TEGRA_APB_DMA_CH0_BASE 0x6000B000 -#define TEGRA_APB_DMA_CH0_SIZE 32 - -#define TEGRA_AHB_GIZMO_BASE 0x6000C004 -#define TEGRA_AHB_GIZMO_SIZE 0x10C - #define TEGRA_SB_BASE 0x6000C200 #define TEGRA_SB_SIZE 256 -#define TEGRA_STATMON_BASE 0x6000C400 -#define TEGRA_STATMON_SIZE SZ_1K - -#define TEGRA_GPIO_BASE 0x6000D000 -#define TEGRA_GPIO_SIZE SZ_4K - #define TEGRA_EXCEPTION_VECTORS_BASE 0x6000F000 #define TEGRA_EXCEPTION_VECTORS_SIZE SZ_4K #define TEGRA_APB_MISC_BASE 0x70000000 #define TEGRA_APB_MISC_SIZE SZ_4K -#define TEGRA_APB_MISC_DAS_BASE 0x70000c00 -#define TEGRA_APB_MISC_DAS_SIZE SZ_128 - -#define TEGRA_AC97_BASE 0x70002000 -#define TEGRA_AC97_SIZE SZ_512 - -#define TEGRA_SPDIF_BASE 0x70002400 -#define TEGRA_SPDIF_SIZE SZ_512 - -#define TEGRA_I2S1_BASE 0x70002800 -#define TEGRA_I2S1_SIZE SZ_256 - -#define TEGRA_I2S2_BASE 0x70002A00 -#define TEGRA_I2S2_SIZE SZ_256 - #define TEGRA_UARTA_BASE 0x70006000 #define TEGRA_UARTA_SIZE SZ_64 @@ -158,108 +90,27 @@ #define TEGRA_UARTE_BASE 0x70006400 #define TEGRA_UARTE_SIZE SZ_256 -#define TEGRA_NAND_BASE 0x70008000 -#define TEGRA_NAND_SIZE SZ_256 - -#define TEGRA_HSMMC_BASE 0x70008500 -#define TEGRA_HSMMC_SIZE SZ_256 - -#define TEGRA_SNOR_BASE 0x70009000 -#define TEGRA_SNOR_SIZE SZ_4K - -#define TEGRA_PWFM_BASE 0x7000A000 -#define TEGRA_PWFM_SIZE SZ_256 - -#define TEGRA_PWFM0_BASE 0x7000A000 -#define TEGRA_PWFM0_SIZE 4 - -#define TEGRA_PWFM1_BASE 0x7000A010 -#define TEGRA_PWFM1_SIZE 4 - -#define TEGRA_PWFM2_BASE 0x7000A020 -#define TEGRA_PWFM2_SIZE 4 - -#define TEGRA_PWFM3_BASE 0x7000A030 -#define TEGRA_PWFM3_SIZE 4 - -#define TEGRA_MIPI_BASE 0x7000B000 -#define TEGRA_MIPI_SIZE SZ_256 - -#define TEGRA_I2C_BASE 0x7000C000 -#define TEGRA_I2C_SIZE SZ_256 - -#define TEGRA_TWC_BASE 0x7000C100 -#define TEGRA_TWC_SIZE SZ_256 - -#define TEGRA_SPI_BASE 0x7000C380 -#define TEGRA_SPI_SIZE 48 - -#define TEGRA_I2C2_BASE 0x7000C400 -#define TEGRA_I2C2_SIZE SZ_256 - -#define TEGRA_I2C3_BASE 0x7000C500 -#define TEGRA_I2C3_SIZE SZ_256 - -#define TEGRA_OWR_BASE 0x7000C600 -#define TEGRA_OWR_SIZE 80 - -#define TEGRA_DVC_BASE 0x7000D000 -#define TEGRA_DVC_SIZE SZ_512 - -#define TEGRA_SPI1_BASE 0x7000D400 -#define TEGRA_SPI1_SIZE SZ_512 - -#define TEGRA_SPI2_BASE 0x7000D600 -#define TEGRA_SPI2_SIZE SZ_512 - -#define TEGRA_SPI3_BASE 0x7000D800 -#define TEGRA_SPI3_SIZE SZ_512 - -#define TEGRA_SPI4_BASE 0x7000DA00 -#define TEGRA_SPI4_SIZE SZ_512 - -#define TEGRA_RTC_BASE 0x7000E000 -#define TEGRA_RTC_SIZE SZ_256 - -#define TEGRA_KBC_BASE 0x7000E200 -#define TEGRA_KBC_SIZE SZ_256 - #define TEGRA_PMC_BASE 0x7000E400 #define TEGRA_PMC_SIZE SZ_256 -#define TEGRA_MC_BASE 0x7000F000 -#define TEGRA_MC_SIZE SZ_1K - #define TEGRA_EMC_BASE 0x7000F400 #define TEGRA_EMC_SIZE SZ_1K #define TEGRA_FUSE_BASE 0x7000F800 #define TEGRA_FUSE_SIZE SZ_1K -#define TEGRA_KFUSE_BASE 0x7000FC00 -#define TEGRA_KFUSE_SIZE SZ_1K - #define TEGRA_EMC0_BASE 0x7001A000 #define TEGRA_EMC0_SIZE SZ_2K #define TEGRA_EMC1_BASE 0x7001A800 #define TEGRA_EMC1_SIZE SZ_2K +#define TEGRA124_EMC_BASE 0x7001B000 +#define TEGRA124_EMC_SIZE SZ_2K + #define TEGRA_CSITE_BASE 0x70040000 #define TEGRA_CSITE_SIZE SZ_256K -#define TEGRA_SDMMC1_BASE 0xC8000000 -#define TEGRA_SDMMC1_SIZE SZ_512 - -#define TEGRA_SDMMC2_BASE 0xC8000200 -#define TEGRA_SDMMC2_SIZE SZ_512 - -#define TEGRA_SDMMC3_BASE 0xC8000400 -#define TEGRA_SDMMC3_SIZE SZ_512 - -#define TEGRA_SDMMC4_BASE 0xC8000600 -#define TEGRA_SDMMC4_SIZE SZ_512 - /* On TEGRA, many peripherals are very closely packed in * two 256MB io windows (that actually only use about 64KB * at the start of each). diff --git a/arch/arm/mach-tegra/irammap.h b/arch/arm/mach-tegra/irammap.h index 501952a8434..e32e1742c9a 100644 --- a/arch/arm/mach-tegra/irammap.h +++ b/arch/arm/mach-tegra/irammap.h @@ -23,4 +23,10 @@ #define TEGRA_IRAM_RESET_HANDLER_OFFSET 0 #define TEGRA_IRAM_RESET_HANDLER_SIZE SZ_1K +/* + * This area is used for LPx resume vector, only while LPx power state is + * active. At other times, the AVP may use this area for arbitrary purposes + */ +#define TEGRA_IRAM_LPx_RESUME_AREA (TEGRA_IRAM_BASE + SZ_4K) + #endif diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c index 2d0203627fb..eb72ae70912 100644 --- a/arch/arm/mach-tegra/platsmp.c +++ b/arch/arm/mach-tegra/platsmp.c @@ -176,6 +176,8 @@ static int tegra_boot_secondary(unsigned int cpu, return tegra30_boot_secondary(cpu, idle); if (IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC) && tegra_chip_id == TEGRA114) return tegra114_boot_secondary(cpu, idle); + if (IS_ENABLED(CONFIG_ARCH_TEGRA_124_SOC) && tegra_chip_id == TEGRA124) + return tegra114_boot_secondary(cpu, idle); return -EINVAL; } diff --git a/arch/arm/mach-tegra/pm.c b/arch/arm/mach-tegra/pm.c index ed294a04e1d..4ae0286b468 100644 --- a/arch/arm/mach-tegra/pm.c +++ b/arch/arm/mach-tegra/pm.c @@ -59,8 +59,10 @@ static void tegra_tear_down_cpu_init(void) break; case TEGRA30: case TEGRA114: + case TEGRA124: if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) || - IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC)) + IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC) || + IS_ENABLED(CONFIG_ARCH_TEGRA_124_SOC)) tegra_tear_down_cpu = tegra30_tear_down_cpu; break; } @@ -216,8 +218,10 @@ static bool tegra_lp1_iram_hook(void) break; case TEGRA30: case TEGRA114: + case TEGRA124: if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) || - IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC)) + IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC) || + IS_ENABLED(CONFIG_ARCH_TEGRA_124_SOC)) tegra30_lp1_iram_hook(); break; default: @@ -244,8 +248,10 @@ static bool tegra_sleep_core_init(void) break; case TEGRA30: case TEGRA114: + case TEGRA124: if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) || - IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC)) + IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC) || + IS_ENABLED(CONFIG_ARCH_TEGRA_124_SOC)) tegra30_sleep_core_init(); break; default: @@ -263,10 +269,10 @@ static void tegra_suspend_enter_lp1(void) tegra_pmc_suspend(); /* copy the reset vector & SDRAM shutdown code into IRAM */ - memcpy(iram_save_addr, IO_ADDRESS(TEGRA_IRAM_CODE_AREA), - iram_save_size); - memcpy(IO_ADDRESS(TEGRA_IRAM_CODE_AREA), tegra_lp1_iram.start_addr, + memcpy(iram_save_addr, IO_ADDRESS(TEGRA_IRAM_LPx_RESUME_AREA), iram_save_size); + memcpy(IO_ADDRESS(TEGRA_IRAM_LPx_RESUME_AREA), + tegra_lp1_iram.start_addr, iram_save_size); *((u32 *)tegra_cpu_lp1_mask) = 1; } @@ -276,7 +282,7 @@ static void tegra_suspend_exit_lp1(void) tegra_pmc_resume(); /* restore IRAM */ - memcpy(IO_ADDRESS(TEGRA_IRAM_CODE_AREA), iram_save_addr, + memcpy(IO_ADDRESS(TEGRA_IRAM_LPx_RESUME_AREA), iram_save_addr, iram_save_size); *(u32 *)tegra_cpu_lp1_mask = 0; diff --git a/arch/arm/mach-tegra/pm.h b/arch/arm/mach-tegra/pm.h index fe204e5256e..6e92a7c2ecb 100644 --- a/arch/arm/mach-tegra/pm.h +++ b/arch/arm/mach-tegra/pm.h @@ -37,9 +37,6 @@ void tegra30_sleep_core_init(void); extern unsigned long l2x0_saved_regs_addr; -void save_cpu_arch_register(void); -void restore_cpu_arch_register(void); - void tegra_clear_cpu_in_lp2(void); bool tegra_set_cpu_in_lp2(void); diff --git a/arch/arm/mach-tegra/pmc.c b/arch/arm/mach-tegra/pmc.c index 8acb881f7cf..fb7920201ab 100644 --- a/arch/arm/mach-tegra/pmc.c +++ b/arch/arm/mach-tegra/pmc.c @@ -20,6 +20,7 @@ #include <linux/io.h> #include <linux/of.h> #include <linux/of_address.h> +#include <linux/tegra-powergate.h> #include "flowctrl.h" #include "fuse.h" @@ -43,12 +44,6 @@ #define PMC_CPUPWRGOOD_TIMER 0xc8 #define PMC_CPUPWROFF_TIMER 0xcc -#define TEGRA_POWERGATE_PCIE 3 -#define TEGRA_POWERGATE_VDEC 4 -#define TEGRA_POWERGATE_CPU1 9 -#define TEGRA_POWERGATE_CPU2 10 -#define TEGRA_POWERGATE_CPU3 11 - static u8 tegra_cpu_domains[] = { 0xFF, /* not available for CPU0 */ TEGRA_POWERGATE_CPU1, @@ -166,6 +161,15 @@ int tegra_pmc_cpu_remove_clamping(int cpuid) return tegra_pmc_powergate_remove_clamping(id); } +void tegra_pmc_restart(enum reboot_mode mode, const char *cmd) +{ + u32 val; + + val = tegra_pmc_readl(0); + val |= 0x10; + tegra_pmc_writel(val, 0); +} + #ifdef CONFIG_PM_SLEEP static void set_power_timers(u32 us_on, u32 us_off, unsigned long rate) { @@ -279,19 +283,17 @@ void tegra_pmc_suspend_init(void) #endif static const struct of_device_id matches[] __initconst = { + { .compatible = "nvidia,tegra124-pmc" }, { .compatible = "nvidia,tegra114-pmc" }, { .compatible = "nvidia,tegra30-pmc" }, { .compatible = "nvidia,tegra20-pmc" }, { } }; -static void __init tegra_pmc_parse_dt(void) +void __init tegra_pmc_init_irq(void) { struct device_node *np; - u32 prop; - enum tegra_suspend_mode suspend_mode; - u32 core_good_time[2] = {0, 0}; - u32 lp0_vec[2] = {0, 0}; + u32 val; np = of_find_matching_node(NULL, matches); BUG_ON(!np); @@ -300,6 +302,26 @@ static void __init tegra_pmc_parse_dt(void) tegra_pmc_invert_interrupt = of_property_read_bool(np, "nvidia,invert-interrupt"); + + val = tegra_pmc_readl(PMC_CTRL); + if (tegra_pmc_invert_interrupt) + val |= PMC_CTRL_INTR_LOW; + else + val &= ~PMC_CTRL_INTR_LOW; + tegra_pmc_writel(val, PMC_CTRL); +} + +void __init tegra_pmc_init(void) +{ + struct device_node *np; + u32 prop; + enum tegra_suspend_mode suspend_mode; + u32 core_good_time[2] = {0, 0}; + u32 lp0_vec[2] = {0, 0}; + + np = of_find_matching_node(NULL, matches); + BUG_ON(!np); + tegra_pclk = of_clk_get_by_name(np, "pclk"); WARN_ON(IS_ERR(tegra_pclk)); @@ -365,17 +387,3 @@ static void __init tegra_pmc_parse_dt(void) pmc_pm_data.suspend_mode = suspend_mode; } - -void __init tegra_pmc_init(void) -{ - u32 val; - - tegra_pmc_parse_dt(); - - val = tegra_pmc_readl(PMC_CTRL); - if (tegra_pmc_invert_interrupt) - val |= PMC_CTRL_INTR_LOW; - else - val &= ~PMC_CTRL_INTR_LOW; - tegra_pmc_writel(val, PMC_CTRL); -} diff --git a/arch/arm/mach-tegra/pmc.h b/arch/arm/mach-tegra/pmc.h index 549f8c7b762..59e19c34429 100644 --- a/arch/arm/mach-tegra/pmc.h +++ b/arch/arm/mach-tegra/pmc.h @@ -18,6 +18,8 @@ #ifndef __MACH_TEGRA_PMC_H #define __MACH_TEGRA_PMC_H +#include <linux/reboot.h> + enum tegra_suspend_mode { TEGRA_SUSPEND_NONE = 0, TEGRA_SUSPEND_LP2, /* CPU voltage off */ @@ -39,6 +41,9 @@ bool tegra_pmc_cpu_is_powered(int cpuid); int tegra_pmc_cpu_power_on(int cpuid); int tegra_pmc_cpu_remove_clamping(int cpuid); +void tegra_pmc_restart(enum reboot_mode mode, const char *cmd); + +void tegra_pmc_init_irq(void); void tegra_pmc_init(void); #endif diff --git a/arch/arm/mach-tegra/powergate.c b/arch/arm/mach-tegra/powergate.c index f076f0f80fc..85d28e756bb 100644 --- a/arch/arm/mach-tegra/powergate.c +++ b/arch/arm/mach-tegra/powergate.c @@ -42,8 +42,16 @@ static int tegra_num_powerdomains; static int tegra_num_cpu_domains; -static u8 *tegra_cpu_domains; -static u8 tegra30_cpu_domains[] = { +static const u8 *tegra_cpu_domains; + +static const u8 tegra30_cpu_domains[] = { + TEGRA_POWERGATE_CPU, + TEGRA_POWERGATE_CPU1, + TEGRA_POWERGATE_CPU2, + TEGRA_POWERGATE_CPU3, +}; + +static const u8 tegra114_cpu_domains[] = { TEGRA_POWERGATE_CPU0, TEGRA_POWERGATE_CPU1, TEGRA_POWERGATE_CPU2, @@ -189,6 +197,11 @@ int __init tegra_powergate_init(void) tegra_num_cpu_domains = 4; tegra_cpu_domains = tegra30_cpu_domains; break; + case TEGRA114: + tegra_num_powerdomains = 23; + tegra_num_cpu_domains = 4; + tegra_cpu_domains = tegra114_cpu_domains; + break; default: /* Unknown Tegra variant. Disable powergating */ tegra_num_powerdomains = 0; @@ -229,6 +242,27 @@ static const char * const powergate_name_t30[] = { [TEGRA_POWERGATE_3D1] = "3d1", }; +static const char * const powergate_name_t114[] = { + [TEGRA_POWERGATE_CPU] = "cpu0", + [TEGRA_POWERGATE_3D] = "3d", + [TEGRA_POWERGATE_VENC] = "venc", + [TEGRA_POWERGATE_VDEC] = "vdec", + [TEGRA_POWERGATE_MPE] = "mpe", + [TEGRA_POWERGATE_HEG] = "heg", + [TEGRA_POWERGATE_CPU1] = "cpu1", + [TEGRA_POWERGATE_CPU2] = "cpu2", + [TEGRA_POWERGATE_CPU3] = "cpu3", + [TEGRA_POWERGATE_CELP] = "celp", + [TEGRA_POWERGATE_CPU0] = "cpu0", + [TEGRA_POWERGATE_C0NC] = "c0nc", + [TEGRA_POWERGATE_C1NC] = "c1nc", + [TEGRA_POWERGATE_DIS] = "dis", + [TEGRA_POWERGATE_DISB] = "disb", + [TEGRA_POWERGATE_XUSBA] = "xusba", + [TEGRA_POWERGATE_XUSBB] = "xusbb", + [TEGRA_POWERGATE_XUSBC] = "xusbc", +}; + static int powergate_show(struct seq_file *s, void *data) { int i; @@ -236,9 +270,14 @@ static int powergate_show(struct seq_file *s, void *data) seq_printf(s, " powergate powered\n"); seq_printf(s, "------------------\n"); - for (i = 0; i < tegra_num_powerdomains; i++) + for (i = 0; i < tegra_num_powerdomains; i++) { + if (!powergate_name[i]) + continue; + seq_printf(s, " %9s %7s\n", powergate_name[i], tegra_powergate_is_powered(i) ? "yes" : "no"); + } + return 0; } @@ -265,6 +304,9 @@ int __init tegra_powergate_debugfs_init(void) case TEGRA30: powergate_name = powergate_name_t30; break; + case TEGRA114: + powergate_name = powergate_name_t114; + break; } if (powergate_name) { diff --git a/arch/arm/mach-tegra/reset-handler.S b/arch/arm/mach-tegra/reset-handler.S index f527b2c2dea..8c1ba4fea38 100644 --- a/arch/arm/mach-tegra/reset-handler.S +++ b/arch/arm/mach-tegra/reset-handler.S @@ -45,17 +45,11 @@ ENTRY(tegra_resume) check_cpu_part_num 0xc09, r8, r9 bleq v7_invalidate_l1 - blne tegra_init_l2_for_a15 cpu_id r0 - tegra_get_soc_id TEGRA_APB_MISC_BASE, r6 - cmp r6, #TEGRA114 - beq no_cpu0_chk - cmp r0, #0 @ CPU0? THUMB( it ne ) bne cpu_resume @ no -no_cpu0_chk: /* Are we on Tegra20? */ cmp r6, #TEGRA20 @@ -75,7 +69,7 @@ no_cpu0_chk: mov32 r9, 0xc09 cmp r8, r9 - bne not_ca9 + bne end_ca9_scu_l2_resume #ifdef CONFIG_HAVE_ARM_SCU /* enable SCU */ mov32 r0, TEGRA_ARM_PERIF_BASE @@ -86,7 +80,10 @@ no_cpu0_chk: /* L2 cache resume & re-enable */ l2_cache_resume r0, r1, r2, l2x0_saved_regs_addr -not_ca9: +end_ca9_scu_l2_resume: + mov32 r9, 0xc0f + cmp r8, r9 + bleq tegra_init_l2_for_a15 b cpu_resume ENDPROC(tegra_resume) diff --git a/arch/arm/mach-tegra/reset.c b/arch/arm/mach-tegra/reset.c index fd0bbf8a6c9..568f5bbf979 100644 --- a/arch/arm/mach-tegra/reset.c +++ b/arch/arm/mach-tegra/reset.c @@ -82,7 +82,7 @@ void __init tegra_cpu_reset_handler_init(void) #ifdef CONFIG_PM_SLEEP __tegra_cpu_reset_handler_data[TEGRA_RESET_STARTUP_LP1] = - TEGRA_IRAM_CODE_AREA; + TEGRA_IRAM_LPx_RESUME_AREA; __tegra_cpu_reset_handler_data[TEGRA_RESET_STARTUP_LP2] = virt_to_phys((void *)tegra_resume); #endif diff --git a/arch/arm/mach-tegra/sleep-tegra20.S b/arch/arm/mach-tegra/sleep-tegra20.S index 5c3bd11c983..aaaf3abd268 100644 --- a/arch/arm/mach-tegra/sleep-tegra20.S +++ b/arch/arm/mach-tegra/sleep-tegra20.S @@ -25,6 +25,7 @@ #include <asm/cp15.h> #include <asm/cache.h> +#include "irammap.h" #include "sleep.h" #include "flowctrl.h" @@ -235,7 +236,7 @@ ENTRY(tegra20_sleep_core_finish) mov32 r0, tegra20_tear_down_core mov32 r1, tegra20_iram_start sub r0, r0, r1 - mov32 r1, TEGRA_IRAM_CODE_AREA + mov32 r1, TEGRA_IRAM_LPx_RESUME_AREA add r0, r0, r1 mov pc, r3 @@ -328,7 +329,7 @@ tegra20_iram_start: * The physical address of tegra_resume expected to be stored in * PMC_SCRATCH41. * - * NOTE: THIS *MUST* BE RELOCATED TO TEGRA_IRAM_CODE_AREA. + * NOTE: THIS *MUST* BE RELOCATED TO TEGRA_IRAM_LPx_RESUME_AREA. */ ENTRY(tegra20_lp1_reset) /* diff --git a/arch/arm/mach-tegra/sleep-tegra30.S b/arch/arm/mach-tegra/sleep-tegra30.S index 63fa91b5faf..b16d4a57fa5 100644 --- a/arch/arm/mach-tegra/sleep-tegra30.S +++ b/arch/arm/mach-tegra/sleep-tegra30.S @@ -20,6 +20,7 @@ #include <asm/asm-offsets.h> #include <asm/cache.h> +#include "irammap.h" #include "fuse.h" #include "sleep.h" #include "flowctrl.h" @@ -262,7 +263,7 @@ ENTRY(tegra30_sleep_core_finish) mov32 r0, tegra30_tear_down_core mov32 r1, tegra30_iram_start sub r0, r0, r1 - mov32 r1, TEGRA_IRAM_CODE_AREA + mov32 r1, TEGRA_IRAM_LPx_RESUME_AREA add r0, r0, r1 mov pc, r3 @@ -314,7 +315,7 @@ tegra30_iram_start: * The physical address of tegra_resume expected to be stored in * PMC_SCRATCH41. * - * NOTE: THIS *MUST* BE RELOCATED TO TEGRA_IRAM_CODE_AREA. + * NOTE: THIS *MUST* BE RELOCATED TO TEGRA_IRAM_LPx_RESUME_AREA. */ ENTRY(tegra30_lp1_reset) /* @@ -382,7 +383,7 @@ _pll_m_c_x_done: add r1, r1, #LOCK_DELAY wait_until r1, r7, r3 - adr r5, tegra30_sdram_pad_save + adr r5, tegra_sdram_pad_save ldr r4, [r5, #0x18] @ restore CLK_SOURCE_MSELECT str r4, [r0, #CLK_RESET_CLK_SOURCE_MSELECT] @@ -407,8 +408,12 @@ _pll_m_c_x_done: cmp r10, #TEGRA30 movweq r0, #:lower16:TEGRA_EMC_BASE @ r0 reserved for emc base movteq r0, #:upper16:TEGRA_EMC_BASE - movwne r0, #:lower16:TEGRA_EMC0_BASE - movtne r0, #:upper16:TEGRA_EMC0_BASE + cmp r10, #TEGRA114 + movweq r0, #:lower16:TEGRA_EMC0_BASE + movteq r0, #:upper16:TEGRA_EMC0_BASE + cmp r10, #TEGRA124 + movweq r0, #:lower16:TEGRA124_EMC_BASE + movteq r0, #:upper16:TEGRA124_EMC_BASE exit_self_refresh: ldr r1, [r5, #0xC] @ restore EMC_XM2VTTGENPADCTRL @@ -537,6 +542,7 @@ tegra30_sdram_pad_address: .word TEGRA_PMC_BASE + PMC_IO_DPD_STATUS @0x14 .word TEGRA_CLK_RESET_BASE + CLK_RESET_CLK_SOURCE_MSELECT @0x18 .word TEGRA_CLK_RESET_BASE + CLK_RESET_SCLK_BURST @0x1c +tegra30_sdram_pad_address_end: tegra114_sdram_pad_address: .word TEGRA_EMC0_BASE + EMC_CFG @0x0 @@ -552,16 +558,28 @@ tegra114_sdram_pad_address: .word TEGRA_EMC1_BASE + EMC_AUTO_CAL_INTERVAL @0x28 .word TEGRA_EMC1_BASE + EMC_XM2VTTGENPADCTRL @0x2c .word TEGRA_EMC1_BASE + EMC_XM2VTTGENPADCTRL2 @0x30 +tegra114_sdram_pad_adress_end: + +tegra124_sdram_pad_address: + .word TEGRA124_EMC_BASE + EMC_CFG @0x0 + .word TEGRA124_EMC_BASE + EMC_ZCAL_INTERVAL @0x4 + .word TEGRA124_EMC_BASE + EMC_AUTO_CAL_INTERVAL @0x8 + .word TEGRA124_EMC_BASE + EMC_XM2VTTGENPADCTRL @0xc + .word TEGRA124_EMC_BASE + EMC_XM2VTTGENPADCTRL2 @0x10 + .word TEGRA_PMC_BASE + PMC_IO_DPD_STATUS @0x14 + .word TEGRA_CLK_RESET_BASE + CLK_RESET_CLK_SOURCE_MSELECT @0x18 + .word TEGRA_CLK_RESET_BASE + CLK_RESET_SCLK_BURST @0x1c +tegra124_sdram_pad_address_end: tegra30_sdram_pad_size: - .word tegra114_sdram_pad_address - tegra30_sdram_pad_address + .word tegra30_sdram_pad_address_end - tegra30_sdram_pad_address tegra114_sdram_pad_size: - .word tegra30_sdram_pad_size - tegra114_sdram_pad_address + .word tegra114_sdram_pad_adress_end - tegra114_sdram_pad_address - .type tegra30_sdram_pad_save, %object -tegra30_sdram_pad_save: - .rept (tegra30_sdram_pad_size - tegra114_sdram_pad_address) / 4 + .type tegra_sdram_pad_save, %object +tegra_sdram_pad_save: + .rept (tegra114_sdram_pad_adress_end - tegra114_sdram_pad_address) / 4 .long 0 .endr @@ -692,13 +710,18 @@ halted: */ tegra30_sdram_self_refresh: - adr r8, tegra30_sdram_pad_save + adr r8, tegra_sdram_pad_save tegra_get_soc_id TEGRA_APB_MISC_BASE, r10 cmp r10, #TEGRA30 adreq r2, tegra30_sdram_pad_address ldreq r3, tegra30_sdram_pad_size - adrne r2, tegra114_sdram_pad_address - ldrne r3, tegra114_sdram_pad_size + cmp r10, #TEGRA114 + adreq r2, tegra114_sdram_pad_address + ldreq r3, tegra114_sdram_pad_size + cmp r10, #TEGRA124 + adreq r2, tegra124_sdram_pad_address + ldreq r3, tegra30_sdram_pad_size + mov r9, #0 padsave: @@ -716,7 +739,10 @@ padsave_done: cmp r10, #TEGRA30 ldreq r0, =TEGRA_EMC_BASE @ r0 reserved for emc base addr - ldrne r0, =TEGRA_EMC0_BASE + cmp r10, #TEGRA114 + ldreq r0, =TEGRA_EMC0_BASE + cmp r10, #TEGRA124 + ldreq r0, =TEGRA124_EMC_BASE enter_self_refresh: cmp r10, #TEGRA30 diff --git a/arch/arm/mach-tegra/tegra.c b/arch/arm/mach-tegra/tegra.c index 5b8605547a0..ce553d557c3 100644 --- a/arch/arm/mach-tegra/tegra.c +++ b/arch/arm/mach-tegra/tegra.c @@ -16,7 +16,6 @@ * */ -#include <linux/clocksource.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -34,16 +33,78 @@ #include <linux/sys_soc.h> #include <linux/usb/tegra_usb_phy.h> #include <linux/clk/tegra.h> +#include <linux/irqchip.h> +#include <asm/hardware/cache-l2x0.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/setup.h> +#include "apbio.h" #include "board.h" #include "common.h" +#include "cpuidle.h" #include "fuse.h" #include "iomap.h" +#include "irq.h" +#include "pmc.h" +#include "pm.h" +#include "reset.h" +#include "sleep.h" + +/* + * Storage for debug-macro.S's state. + * + * This must be in .data not .bss so that it gets initialized each time the + * kernel is loaded. The data is declared here rather than debug-macro.S so + * that multiple inclusions of debug-macro.S point at the same data. + */ +u32 tegra_uart_config[4] = { + /* Debug UART initialization required */ + 1, + /* Debug UART physical address */ + 0, + /* Debug UART virtual address */ + 0, + /* Scratch space for debug macro */ + 0, +}; + +static void __init tegra_init_cache(void) +{ +#ifdef CONFIG_CACHE_L2X0 + int ret; + void __iomem *p = IO_ADDRESS(TEGRA_ARM_PERIF_BASE) + 0x3000; + u32 aux_ctrl, cache_type; + + cache_type = readl(p + L2X0_CACHE_TYPE); + aux_ctrl = (cache_type & 0x700) << (17-8); + aux_ctrl |= 0x7C400001; + + ret = l2x0_of_init(aux_ctrl, 0x8200c3fe); + if (!ret) + l2x0_saved_regs_addr = virt_to_phys(&l2x0_saved_regs); +#endif +} + +static void __init tegra_init_early(void) +{ + tegra_cpu_reset_handler_init(); + tegra_apb_io_init(); + tegra_init_fuse(); + tegra_init_cache(); + tegra_powergate_init(); + tegra_hotplug_init(); +} + +static void __init tegra_dt_init_irq(void) +{ + tegra_pmc_init_irq(); + tegra_init_irq(); + irqchip_init(); + tegra_legacy_irq_syscore_init(); +} static void __init tegra_dt_init(void) { @@ -51,6 +112,8 @@ static void __init tegra_dt_init(void) struct soc_device *soc_dev; struct device *parent = NULL; + tegra_pmc_init(); + tegra_clocks_apply_init_table(); soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); @@ -97,7 +160,9 @@ static void __init tegra_dt_init_late(void) { int i; - tegra_init_late(); + tegra_init_suspend(); + tegra_cpuidle_init(); + tegra_powergate_debugfs_init(); for (i = 0; i < ARRAY_SIZE(board_init_funcs); i++) { if (of_machine_is_compatible(board_init_funcs[i].machine)) { @@ -108,6 +173,7 @@ static void __init tegra_dt_init_late(void) } static const char * const tegra_dt_board_compat[] = { + "nvidia,tegra124", "nvidia,tegra114", "nvidia,tegra30", "nvidia,tegra20", @@ -119,9 +185,8 @@ DT_MACHINE_START(TEGRA_DT, "NVIDIA Tegra SoC (Flattened Device Tree)") .smp = smp_ops(tegra_smp_ops), .init_early = tegra_init_early, .init_irq = tegra_dt_init_irq, - .init_time = clocksource_of_init, .init_machine = tegra_dt_init, .init_late = tegra_dt_init_late, - .restart = tegra_assert_system_reset, + .restart = tegra_pmc_restart, .dt_compat = tegra_dt_board_compat, MACHINE_END diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig index a1659863bfd..8e23071bd1b 100644 --- a/arch/arm/mach-u300/Kconfig +++ b/arch/arm/mach-u300/Kconfig @@ -5,7 +5,6 @@ config ARCH_U300 select ARM_AMBA select ARM_PATCH_PHYS_VIRT select ARM_VIC - select CLKDEV_LOOKUP select CLKSRC_MMIO select CLKSRC_OF select COMMON_CLK diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index 99a28d62829..c67f8ad5ccd 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -1,37 +1,32 @@ config ARCH_U8500 bool "ST-Ericsson U8500 Series" if ARCH_MULTI_V7 depends on MMU + select AB8500_CORE + select ABX500_CORE select ARCH_HAS_CPUFREQ select ARCH_REQUIRE_GPIOLIB select ARM_AMBA - select CLKDEV_LOOKUP + select ARM_ERRATA_754322 + select ARM_ERRATA_764369 if SMP + select ARM_GIC + select CACHE_L2X0 + select CLKSRC_NOMADIK_MTU + select COMMON_CLK select CPU_V7 select GENERIC_CLOCKEVENTS select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP select HAVE_SMP select MIGHT_HAVE_CACHE_L2X0 + select PINCTRL + select PINCTRL_ABX500 + select PINCTRL_NOMADIK + select PL310_ERRATA_753970 if CACHE_PL310 help Support for ST-Ericsson's Ux500 architecture if ARCH_U8500 -config UX500_SOC_COMMON - bool - default y - select ABX500_CORE - select AB8500_CORE - select ARM_ERRATA_754322 - select ARM_ERRATA_764369 if SMP - select ARM_GIC - select CACHE_L2X0 - select CLKSRC_NOMADIK_MTU - select COMMON_CLK - select PINCTRL - select PINCTRL_NOMADIK - select PINCTRL_ABX500 - select PL310_ERRATA_753970 if CACHE_PL310 - config UX500_SOC_DB8500 bool select CPU_FREQ_TABLE if CPU_FREQ diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile index fe1f3e26b88..616b96e86ad 100644 --- a/arch/arm/mach-ux500/Makefile +++ b/arch/arm/mach-ux500/Makefile @@ -2,14 +2,11 @@ # Makefile for the linux kernel, U8500 machine. # -obj-y := cpu.o devices.o devices-common.o \ - id.o usb.o timer.o pm.o +obj-y := cpu.o devices.o id.o timer.o pm.o obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o devices-db8500.o obj-$(CONFIG_MACH_MOP500) += board-mop500.o board-mop500-sdi.o \ board-mop500-regulators.o \ - board-mop500-uib.o board-mop500-stuib.o \ - board-mop500-u8500uib.o \ board-mop500-pins.o \ board-mop500-audio.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o diff --git a/arch/arm/mach-ux500/board-mop500-audio.c b/arch/arm/mach-ux500/board-mop500-audio.c index ec0807247e6..154e15f5970 100644 --- a/arch/arm/mach-ux500/board-mop500-audio.c +++ b/arch/arm/mach-ux500/board-mop500-audio.c @@ -68,40 +68,6 @@ static struct stedma40_chan_cfg msp2_dma_tx = { .phy_channel = 1, }; -static struct platform_device *db8500_add_msp_i2s(struct device *parent, - int id, - resource_size_t base, int irq, - struct msp_i2s_platform_data *pdata) -{ - struct platform_device *pdev; - struct resource res[] = { - DEFINE_RES_MEM(base, SZ_4K), - DEFINE_RES_IRQ(irq), - }; - - pr_info("Register platform-device 'ux500-msp-i2s', id %d, irq %d\n", - id, irq); - pdev = platform_device_register_resndata(parent, "ux500-msp-i2s", id, - res, ARRAY_SIZE(res), - pdata, sizeof(*pdata)); - if (!pdev) { - pr_err("Failed to register platform-device 'ux500-msp-i2s.%d'!\n", - id); - return NULL; - } - - return pdev; -} - -/* Platform device for ASoC MOP500 machine */ -static struct platform_device snd_soc_mop500 = { - .name = "snd-soc-mop500", - .id = 0, - .dev = { - .platform_data = NULL, - }, -}; - struct msp_i2s_platform_data msp2_platform_data = { .id = MSP_I2S_2, .msp_i2s_dma_rx = &msp2_dma_rx, @@ -113,19 +79,3 @@ struct msp_i2s_platform_data msp3_platform_data = { .msp_i2s_dma_rx = &msp1_dma_rx, .msp_i2s_dma_tx = NULL, }; - -void mop500_audio_init(struct device *parent) -{ - pr_info("%s: Register platform-device 'snd-soc-mop500'.\n", __func__); - platform_device_register(&snd_soc_mop500); - - pr_info("Initialize MSP I2S-devices.\n"); - db8500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0, - &msp0_platform_data); - db8500_add_msp_i2s(parent, 1, U8500_MSP1_BASE, IRQ_DB8500_MSP1, - &msp1_platform_data); - db8500_add_msp_i2s(parent, 2, U8500_MSP2_BASE, IRQ_DB8500_MSP2, - &msp2_platform_data); - db8500_add_msp_i2s(parent, 3, U8500_MSP3_BASE, IRQ_DB8500_MSP1, - &msp3_platform_data); -} diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c index b3e61a38e5c..26600a1c531 100644 --- a/arch/arm/mach-ux500/board-mop500-sdi.c +++ b/arch/arm/mach-ux500/board-mop500-sdi.c @@ -65,18 +65,6 @@ struct mmci_platform_data mop500_sdi0_data = { #endif }; -static void sdi0_configure(struct device *parent) -{ - /* Add the device, force v2 to subrevision 1 */ - db8500_add_sdi0(parent, &mop500_sdi0_data, U8500_SDI_V2_PERIPHID); -} - -void mop500_sdi_tc35892_init(struct device *parent) -{ - mop500_sdi0_data.gpio_cd = GPIO_SDMMC_CD; - sdi0_configure(parent); -} - /* * SDI1 (SDIO WLAN) */ @@ -178,42 +166,3 @@ struct mmci_platform_data mop500_sdi4_data = { .dma_tx_param = &mop500_sdi4_dma_cfg_tx, #endif }; - -void __init mop500_sdi_init(struct device *parent) -{ - /* PoP:ed eMMC */ - db8500_add_sdi2(parent, &mop500_sdi2_data, U8500_SDI_V2_PERIPHID); - /* On-board eMMC */ - db8500_add_sdi4(parent, &mop500_sdi4_data, U8500_SDI_V2_PERIPHID); - - /* - * On boards with the TC35892 GPIO expander, sdi0 will finally - * be added when the TC35892 initializes and calls - * mop500_sdi_tc35892_init() above. - */ -} - -void __init snowball_sdi_init(struct device *parent) -{ - /* On Snowball MMC_CAP_SD_HIGHSPEED isn't supported (Hardware issue?) */ - mop500_sdi0_data.capabilities &= ~MMC_CAP_SD_HIGHSPEED; - /* On-board eMMC */ - db8500_add_sdi4(parent, &mop500_sdi4_data, U8500_SDI_V2_PERIPHID); - /* External Micro SD slot */ - mop500_sdi0_data.gpio_cd = SNOWBALL_SDMMC_CD_GPIO; - mop500_sdi0_data.cd_invert = true; - sdi0_configure(parent); -} - -void __init hrefv60_sdi_init(struct device *parent) -{ - /* PoP:ed eMMC */ - db8500_add_sdi2(parent, &mop500_sdi2_data, U8500_SDI_V2_PERIPHID); - /* On-board eMMC */ - db8500_add_sdi4(parent, &mop500_sdi4_data, U8500_SDI_V2_PERIPHID); - /* External Micro SD slot */ - mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO; - sdi0_configure(parent); - /* WLAN SDIO channel */ - db8500_add_sdi1(parent, &mop500_sdi1_data, U8500_SDI_V2_PERIPHID); -} diff --git a/arch/arm/mach-ux500/board-mop500-stuib.c b/arch/arm/mach-ux500/board-mop500-stuib.c deleted file mode 100644 index 7e1f294f043..00000000000 --- a/arch/arm/mach-ux500/board-mop500-stuib.c +++ /dev/null @@ -1,120 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * License terms: GNU General Public License (GPL), version 2 - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/mfd/stmpe.h> -#include <linux/input/bu21013.h> -#include <linux/gpio.h> -#include <linux/interrupt.h> -#include <linux/i2c.h> -#include <linux/input/matrix_keypad.h> -#include <asm/mach-types.h> - -#include "board-mop500.h" - -/* STMPE/SKE keypad use this key layout */ -static const unsigned int mop500_keymap[] = { - KEY(2, 5, KEY_END), - KEY(4, 1, KEY_POWER), - KEY(3, 5, KEY_VOLUMEDOWN), - KEY(1, 3, KEY_3), - KEY(5, 2, KEY_RIGHT), - KEY(5, 0, KEY_9), - - KEY(0, 5, KEY_MENU), - KEY(7, 6, KEY_ENTER), - KEY(4, 5, KEY_0), - KEY(6, 7, KEY_2), - KEY(3, 4, KEY_UP), - KEY(3, 3, KEY_DOWN), - - KEY(6, 4, KEY_SEND), - KEY(6, 2, KEY_BACK), - KEY(4, 2, KEY_VOLUMEUP), - KEY(5, 5, KEY_1), - KEY(4, 3, KEY_LEFT), - KEY(3, 2, KEY_7), -}; - -static const struct matrix_keymap_data mop500_keymap_data = { - .keymap = mop500_keymap, - .keymap_size = ARRAY_SIZE(mop500_keymap), -}; -/* - * STMPE1601 - */ -static struct stmpe_keypad_platform_data stmpe1601_keypad_data = { - .debounce_ms = 64, - .scan_count = 8, - .no_autorepeat = true, - .keymap_data = &mop500_keymap_data, -}; - -static struct stmpe_platform_data stmpe1601_data = { - .id = 1, - .blocks = STMPE_BLOCK_KEYPAD, - .irq_trigger = IRQF_TRIGGER_FALLING, - .irq_base = MOP500_STMPE1601_IRQ(0), - .keypad = &stmpe1601_keypad_data, - .autosleep = true, - .autosleep_timeout = 1024, -}; - -static struct i2c_board_info __initdata mop500_i2c0_devices_stuib[] = { - { - I2C_BOARD_INFO("stmpe1601", 0x40), - .irq = NOMADIK_GPIO_TO_IRQ(218), - .platform_data = &stmpe1601_data, - .flags = I2C_CLIENT_WAKE, - }, -}; - -/* - * BU21013 ROHM touchscreen interface on the STUIBs - */ - -#define TOUCH_GPIO_PIN 84 - -#define TOUCH_XMAX 384 -#define TOUCH_YMAX 704 - -#define PRCMU_CLOCK_OCR 0x1CC -#define TSC_EXT_CLOCK_9_6MHZ 0x840000 - -static struct bu21013_platform_device tsc_plat_device = { - .touch_pin = TOUCH_GPIO_PIN, - .touch_x_max = TOUCH_XMAX, - .touch_y_max = TOUCH_YMAX, - .ext_clk = false, - .x_flip = false, - .y_flip = true, -}; - -static struct i2c_board_info __initdata u8500_i2c3_devices_stuib[] = { - { - I2C_BOARD_INFO("bu21013_tp", 0x5C), - .platform_data = &tsc_plat_device, - }, - { - I2C_BOARD_INFO("bu21013_tp", 0x5D), - .platform_data = &tsc_plat_device, - }, -}; - -void __init mop500_stuib_init(void) -{ - if (machine_is_hrefv60()) - tsc_plat_device.cs_pin = HREFV60_TOUCH_RST_GPIO; - else - tsc_plat_device.cs_pin = GPIO_BU21013_CS; - - mop500_uib_i2c_add(0, mop500_i2c0_devices_stuib, - ARRAY_SIZE(mop500_i2c0_devices_stuib)); - - mop500_uib_i2c_add(3, u8500_i2c3_devices_stuib, - ARRAY_SIZE(u8500_i2c3_devices_stuib)); -} diff --git a/arch/arm/mach-ux500/board-mop500-u8500uib.c b/arch/arm/mach-ux500/board-mop500-u8500uib.c deleted file mode 100644 index d397c19570a..00000000000 --- a/arch/arm/mach-ux500/board-mop500-u8500uib.c +++ /dev/null @@ -1,92 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Board data for the U8500 UIB, also known as the New UIB - * License terms: GNU General Public License (GPL), version 2 - */ -#include <linux/gpio.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/i2c.h> -#include <linux/interrupt.h> -#include <linux/mfd/tc3589x.h> -#include <linux/input/matrix_keypad.h> - -#include "irqs.h" - -#include "board-mop500.h" - -static struct i2c_board_info __initdata mop500_i2c3_devices_u8500[] = { - { - I2C_BOARD_INFO("synaptics_rmi4_i2c", 0x4B), - .irq = NOMADIK_GPIO_TO_IRQ(84), - }, -}; - -/* - * TC35893 - */ -static const unsigned int u8500_keymap[] = { - KEY(3, 1, KEY_END), - KEY(4, 1, KEY_POWER), - KEY(6, 4, KEY_VOLUMEDOWN), - KEY(4, 2, KEY_EMAIL), - KEY(3, 3, KEY_RIGHT), - KEY(2, 5, KEY_BACKSPACE), - - KEY(6, 7, KEY_MENU), - KEY(5, 0, KEY_ENTER), - KEY(4, 3, KEY_0), - KEY(3, 4, KEY_DOT), - KEY(5, 2, KEY_UP), - KEY(3, 5, KEY_DOWN), - - KEY(4, 5, KEY_SEND), - KEY(0, 5, KEY_BACK), - KEY(6, 2, KEY_VOLUMEUP), - KEY(1, 3, KEY_SPACE), - KEY(7, 6, KEY_LEFT), - KEY(5, 5, KEY_SEARCH), -}; - -static struct matrix_keymap_data u8500_keymap_data = { - .keymap = u8500_keymap, - .keymap_size = ARRAY_SIZE(u8500_keymap), -}; - -static struct tc3589x_keypad_platform_data tc35893_data = { - .krow = TC_KPD_ROWS, - .kcol = TC_KPD_COLUMNS, - .debounce_period = TC_KPD_DEBOUNCE_PERIOD, - .settle_time = TC_KPD_SETTLE_TIME, - .irqtype = IRQF_TRIGGER_FALLING, - .enable_wakeup = true, - .keymap_data = &u8500_keymap_data, - .no_autorepeat = true, -}; - -static struct tc3589x_platform_data tc3589x_keypad_data = { - .block = TC3589x_BLOCK_KEYPAD, - .keypad = &tc35893_data, - .irq_base = MOP500_EGPIO_IRQ_BASE, -}; - -static struct i2c_board_info __initdata mop500_i2c0_devices_u8500[] = { - { - I2C_BOARD_INFO("tc3589x", 0x44), - .platform_data = &tc3589x_keypad_data, - .irq = NOMADIK_GPIO_TO_IRQ(218), - .flags = I2C_CLIENT_WAKE, - }, -}; - - -void __init mop500_u8500uib_init(void) -{ - mop500_uib_i2c_add(3, mop500_i2c3_devices_u8500, - ARRAY_SIZE(mop500_i2c3_devices_u8500)); - - mop500_uib_i2c_add(0, mop500_i2c0_devices_u8500, - ARRAY_SIZE(mop500_i2c0_devices_u8500)); - -} diff --git a/arch/arm/mach-ux500/board-mop500-uib.c b/arch/arm/mach-ux500/board-mop500-uib.c deleted file mode 100644 index bdaa422da02..00000000000 --- a/arch/arm/mach-ux500/board-mop500-uib.c +++ /dev/null @@ -1,133 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson - * License terms: GNU General Public License (GPL), version 2 - */ - -#define pr_fmt(fmt) "mop500-uib: " fmt - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/i2c.h> - -#include "board-mop500.h" -#include "id.h" - -enum mop500_uib { - STUIB, - U8500UIB, -}; - -struct uib { - const char *name; - const char *option; - void (*init)(void); -}; - -static struct uib __initdata mop500_uibs[] = { - [STUIB] = { - .name = "ST-UIB", - .option = "stuib", - .init = mop500_stuib_init, - }, - [U8500UIB] = { - .name = "U8500-UIB", - .option = "u8500uib", - .init = mop500_u8500uib_init, - }, -}; - -static struct uib *mop500_uib; - -static int __init mop500_uib_setup(char *str) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(mop500_uibs); i++) { - struct uib *uib = &mop500_uibs[i]; - - if (!strcmp(str, uib->option)) { - mop500_uib = uib; - break; - } - } - - if (i == ARRAY_SIZE(mop500_uibs)) - pr_err("invalid uib= option (%s)\n", str); - - return 1; -} -__setup("uib=", mop500_uib_setup); - -/* - * The UIBs are detected after the I2C host controllers are registered, so - * i2c_register_board_info() can't be used. - */ -void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info, - unsigned n) -{ - struct i2c_adapter *adap; - struct i2c_client *client; - int i; - - adap = i2c_get_adapter(busnum); - if (!adap) { - pr_err("failed to get adapter i2c%d\n", busnum); - return; - } - - for (i = 0; i < n; i++) { - client = i2c_new_device(adap, &info[i]); - if (!client) - pr_err("failed to register %s to i2c%d\n", - info[i].type, busnum); - } - - i2c_put_adapter(adap); -} - -static void __init __mop500_uib_init(struct uib *uib, const char *why) -{ - pr_info("%s (%s)\n", uib->name, why); - uib->init(); -} - -/* - * Detect the UIB attached based on the presence or absence of i2c devices. - */ -int __init mop500_uib_init(void) -{ - struct uib *uib = mop500_uib; - struct i2c_adapter *i2c0; - int ret; - - if (!cpu_is_u8500_family()) - return -ENODEV; - - if (uib) { - __mop500_uib_init(uib, "from uib= boot argument"); - return 0; - } - - i2c0 = i2c_get_adapter(0); - if (!i2c0) { - __mop500_uib_init(&mop500_uibs[STUIB], - "fallback, could not get i2c0"); - return -ENODEV; - } - - /* U8500-UIB has the TC35893 at 0x44 on I2C0, the ST-UIB doesn't. */ - ret = i2c_smbus_xfer(i2c0, 0x44, 0, I2C_SMBUS_WRITE, 0, - I2C_SMBUS_QUICK, NULL); - i2c_put_adapter(i2c0); - - if (ret == 0) - uib = &mop500_uibs[U8500UIB]; - else - uib = &mop500_uibs[STUIB]; - - __mop500_uib_init(uib, "detected"); - - return 0; -} diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index ad0806eff76..514d40b625a 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -14,27 +14,16 @@ #include <linux/platform_device.h> #include <linux/clk.h> #include <linux/io.h> -#include <linux/i2c.h> -#include <linux/platform_data/i2c-nomadik.h> #include <linux/platform_data/db8500_thermal.h> -#include <linux/gpio.h> #include <linux/amba/bus.h> #include <linux/amba/pl022.h> -#include <linux/amba/serial.h> -#include <linux/spi/spi.h> #include <linux/mfd/abx500/ab8500.h> #include <linux/regulator/ab8500.h> #include <linux/regulator/fixed.h> #include <linux/regulator/driver.h> -#include <linux/regulator/gpio-regulator.h> -#include <linux/mfd/tc3589x.h> #include <linux/mfd/tps6105x.h> -#include <linux/mfd/abx500/ab8500-gpio.h> -#include <linux/mfd/abx500/ab8500-codec.h> #include <linux/platform_data/leds-lp55xx.h> #include <linux/input.h> -#include <linux/smsc911x.h> -#include <linux/gpio_keys.h> #include <linux/delay.h> #include <linux/leds.h> #include <linux/pinctrl/consumer.h> @@ -46,7 +35,6 @@ #include "setup.h" #include "devices.h" #include "irqs.h" -#include <linux/platform_data/crypto-ux500.h> #include "ste-dma40-db8500.h" #include "db8500-regs.h" @@ -54,401 +42,9 @@ #include "board-mop500.h" #include "board-mop500-regulators.h" -static struct gpio_led snowball_led_array[] = { - { - .name = "user_led", - .default_trigger = "heartbeat", - .gpio = 142, - }, -}; - -static struct gpio_led_platform_data snowball_led_data = { - .leds = snowball_led_array, - .num_leds = ARRAY_SIZE(snowball_led_array), -}; - -static struct platform_device snowball_led_dev = { - .name = "leds-gpio", - .dev = { - .platform_data = &snowball_led_data, - }, -}; - -static struct fixed_voltage_config snowball_gpio_en_3v3_data = { - .supply_name = "EN-3V3", - .gpio = SNOWBALL_EN_3V3_ETH_GPIO, - .microvolts = 3300000, - .enable_high = 1, - .init_data = &gpio_en_3v3_regulator, - .startup_delay = 5000, /* 1200us */ -}; - -static struct platform_device snowball_gpio_en_3v3_regulator_dev = { - .name = "reg-fixed-voltage", - .id = 1, - .dev = { - .platform_data = &snowball_gpio_en_3v3_data, - }, -}; - -/* Dynamically populated. */ -static struct gpio sdi0_reg_gpios[] = { - { 0, GPIOF_OUT_INIT_LOW, "mmci_vsel" }, -}; - -static struct gpio_regulator_state sdi0_reg_states[] = { - { .value = 2900000, .gpios = (0 << 0) }, - { .value = 1800000, .gpios = (1 << 0) }, -}; - -static struct gpio_regulator_config sdi0_reg_info = { - .supply_name = "ext-mmc-level-shifter", - .gpios = sdi0_reg_gpios, - .nr_gpios = ARRAY_SIZE(sdi0_reg_gpios), - .states = sdi0_reg_states, - .nr_states = ARRAY_SIZE(sdi0_reg_states), - .type = REGULATOR_VOLTAGE, - .enable_high = 1, - .enabled_at_boot = 0, - .init_data = &sdi0_reg_init_data, - .startup_delay = 100, -}; - -static struct platform_device sdi0_regulator = { - .name = "gpio-regulator", - .id = -1, - .dev = { - .platform_data = &sdi0_reg_info, - }, -}; - -static struct abx500_gpio_platform_data ab8500_gpio_pdata = { - .gpio_base = MOP500_AB8500_PIN_GPIO(1), -}; - -/* ab8500-codec */ -static struct ab8500_codec_platform_data ab8500_codec_pdata = { - .amics = { - .mic1_type = AMIC_TYPE_DIFFERENTIAL, - .mic2_type = AMIC_TYPE_DIFFERENTIAL, - .mic1a_micbias = AMIC_MICBIAS_VAMIC1, - .mic1b_micbias = AMIC_MICBIAS_VAMIC1, - .mic2_micbias = AMIC_MICBIAS_VAMIC2 - }, - .ear_cmv = EAR_CMV_0_95V -}; - -static struct gpio_keys_button snowball_key_array[] = { - { - .gpio = 32, - .type = EV_KEY, - .code = KEY_1, - .desc = "userpb", - .active_low = 1, - .debounce_interval = 50, - .wakeup = 1, - }, - { - .gpio = 151, - .type = EV_KEY, - .code = KEY_2, - .desc = "extkb1", - .active_low = 1, - .debounce_interval = 50, - .wakeup = 1, - }, - { - .gpio = 152, - .type = EV_KEY, - .code = KEY_3, - .desc = "extkb2", - .active_low = 1, - .debounce_interval = 50, - .wakeup = 1, - }, - { - .gpio = 161, - .type = EV_KEY, - .code = KEY_4, - .desc = "extkb3", - .active_low = 1, - .debounce_interval = 50, - .wakeup = 1, - }, - { - .gpio = 162, - .type = EV_KEY, - .code = KEY_5, - .desc = "extkb4", - .active_low = 1, - .debounce_interval = 50, - .wakeup = 1, - }, -}; - -static struct gpio_keys_platform_data snowball_key_data = { - .buttons = snowball_key_array, - .nbuttons = ARRAY_SIZE(snowball_key_array), -}; - -static struct platform_device snowball_key_dev = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &snowball_key_data, - } -}; - -static struct smsc911x_platform_config snowball_sbnet_cfg = { - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH, - .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, - .flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY, - .shift = 1, -}; - -static struct resource sbnet_res[] = { - { - .name = "smsc911x-memory", - .start = (0x5000 << 16), - .end = (0x5000 << 16) + 0xffff, - .flags = IORESOURCE_MEM, - }, - { - .start = NOMADIK_GPIO_TO_IRQ(140), - .end = NOMADIK_GPIO_TO_IRQ(140), - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, - }, -}; - -static struct platform_device snowball_sbnet_dev = { - .name = "smsc911x", - .num_resources = ARRAY_SIZE(sbnet_res), - .resource = sbnet_res, - .dev = { - .platform_data = &snowball_sbnet_cfg, - }, -}; - struct ab8500_platform_data ab8500_platdata = { .irq_base = MOP500_AB8500_IRQ_BASE, .regulator = &ab8500_regulator_plat_data, - .gpio = &ab8500_gpio_pdata, - .codec = &ab8500_codec_pdata, -}; - -static struct platform_device u8500_cpufreq_cooling_device = { - .name = "db8500-cpufreq-cooling", -}; - -/* - * TPS61052 - */ - -static struct tps6105x_platform_data mop500_tps61052_data = { - .mode = TPS6105X_MODE_VOLTAGE, - .regulator_data = &tps61052_regulator, -}; - -/* - * TC35892 - */ - -static void mop500_tc35892_init(struct tc3589x *tc3589x, unsigned int base) -{ - struct device *parent = NULL; -#if 0 - /* FIXME: Is the sdi actually part of tc3589x? */ - parent = tc3589x->dev; -#endif - mop500_sdi_tc35892_init(parent); -} - -static struct tc3589x_gpio_platform_data mop500_tc35892_gpio_data = { - .gpio_base = MOP500_EGPIO(0), - .setup = mop500_tc35892_init, -}; - -static struct tc3589x_platform_data mop500_tc35892_data = { - .block = TC3589x_BLOCK_GPIO, - .gpio = &mop500_tc35892_gpio_data, - .irq_base = MOP500_EGPIO_IRQ_BASE, -}; - -static struct lp55xx_led_config lp5521_pri_led[] = { - [0] = { - .chan_nr = 0, - .led_current = 0x2f, - .max_current = 0x5f, - }, - [1] = { - .chan_nr = 1, - .led_current = 0x2f, - .max_current = 0x5f, - }, - [2] = { - .chan_nr = 2, - .led_current = 0x2f, - .max_current = 0x5f, - }, -}; - -static struct lp55xx_platform_data __initdata lp5521_pri_data = { - .label = "lp5521_pri", - .led_config = &lp5521_pri_led[0], - .num_channels = 3, - .clock_mode = LP55XX_CLOCK_EXT, -}; - -static struct lp55xx_led_config lp5521_sec_led[] = { - [0] = { - .chan_nr = 0, - .led_current = 0x2f, - .max_current = 0x5f, - }, - [1] = { - .chan_nr = 1, - .led_current = 0x2f, - .max_current = 0x5f, - }, - [2] = { - .chan_nr = 2, - .led_current = 0x2f, - .max_current = 0x5f, - }, -}; - -static struct lp55xx_platform_data __initdata lp5521_sec_data = { - .label = "lp5521_sec", - .led_config = &lp5521_sec_led[0], - .num_channels = 3, - .clock_mode = LP55XX_CLOCK_EXT, -}; - -/* I2C0 devices only available on the first HREF/MOP500 */ -static struct i2c_board_info __initdata mop500_i2c0_devices[] = { - { - I2C_BOARD_INFO("tc3589x", 0x42), - .irq = NOMADIK_GPIO_TO_IRQ(217), - .platform_data = &mop500_tc35892_data, - }, - { - I2C_BOARD_INFO("tps61052", 0x33), - .platform_data = &mop500_tps61052_data, - }, -}; - -static struct i2c_board_info __initdata mop500_i2c2_devices[] = { - { - /* lp5521 LED driver, 1st device */ - I2C_BOARD_INFO("lp5521", 0x33), - .platform_data = &lp5521_pri_data, - }, - { - /* lp5521 LED driver, 2st device */ - I2C_BOARD_INFO("lp5521", 0x34), - .platform_data = &lp5521_sec_data, - }, - { - /* Light sensor Rohm BH1780GLI */ - I2C_BOARD_INFO("bh1780", 0x29), - }, -}; - -static int __init mop500_i2c_board_init(void) -{ - if (machine_is_u8500()) - mop500_uib_i2c_add(0, mop500_i2c0_devices, - ARRAY_SIZE(mop500_i2c0_devices)); - mop500_uib_i2c_add(2, mop500_i2c2_devices, - ARRAY_SIZE(mop500_i2c2_devices)); - return 0; -} -device_initcall(mop500_i2c_board_init); - -static void __init mop500_i2c_init(struct device *parent) -{ - db8500_add_i2c0(parent, NULL); - db8500_add_i2c1(parent, NULL); - db8500_add_i2c2(parent, NULL); - db8500_add_i2c3(parent, NULL); -} - -static struct gpio_keys_button mop500_gpio_keys[] = { - { - .desc = "SFH7741 Proximity Sensor", - .type = EV_SW, - .code = SW_FRONT_PROXIMITY, - .active_low = 0, - .can_disable = 1, - } -}; - -static struct regulator *prox_regulator; -static int mop500_prox_activate(struct device *dev); -static void mop500_prox_deactivate(struct device *dev); - -static struct gpio_keys_platform_data mop500_gpio_keys_data = { - .buttons = mop500_gpio_keys, - .nbuttons = ARRAY_SIZE(mop500_gpio_keys), - .enable = mop500_prox_activate, - .disable = mop500_prox_deactivate, -}; - -static struct platform_device mop500_gpio_keys_device = { - .name = "gpio-keys", - .id = 0, - .dev = { - .platform_data = &mop500_gpio_keys_data, - }, -}; - -static int mop500_prox_activate(struct device *dev) -{ - prox_regulator = regulator_get(&mop500_gpio_keys_device.dev, - "vcc"); - if (IS_ERR(prox_regulator)) { - dev_err(&mop500_gpio_keys_device.dev, - "no regulator\n"); - return PTR_ERR(prox_regulator); - } - - return regulator_enable(prox_regulator); -} - -static void mop500_prox_deactivate(struct device *dev) -{ - regulator_disable(prox_regulator); - regulator_put(prox_regulator); -} - -static struct cryp_platform_data u8500_cryp1_platform_data = { - .mem_to_engine = { - .dir = DMA_MEM_TO_DEV, - .dev_type = DB8500_DMA_DEV48_CAC1, - .mode = STEDMA40_MODE_LOGICAL, - }, - .engine_to_mem = { - .dir = DMA_DEV_TO_MEM, - .dev_type = DB8500_DMA_DEV48_CAC1, - .mode = STEDMA40_MODE_LOGICAL, - } -}; - -static struct stedma40_chan_cfg u8500_hash_dma_cfg_tx = { - .dir = DMA_MEM_TO_DEV, - .dev_type = DB8500_DMA_DEV50_HAC1_TX, - .mode = STEDMA40_MODE_LOGICAL, -}; - -static struct hash_platform_data u8500_hash1_platform_data = { - .mem_to_engine = &u8500_hash_dma_cfg_tx, - .dma_filter = stedma40_filter, -}; - -/* add any platform devices here - TODO */ -static struct platform_device *mop500_platform_devs[] __initdata = { - &mop500_gpio_keys_device, - &sdi0_regulator, }; #ifdef CONFIG_STE_DMA40 @@ -480,236 +76,3 @@ struct pl022_ssp_controller ssp0_plat = { */ .num_chipselect = 5, }; - -static void __init mop500_spi_init(struct device *parent) -{ - db8500_add_ssp0(parent, &ssp0_plat); -} - -#ifdef CONFIG_STE_DMA40 -static struct stedma40_chan_cfg uart0_dma_cfg_rx = { - .mode = STEDMA40_MODE_LOGICAL, - .dir = DMA_DEV_TO_MEM, - .dev_type = DB8500_DMA_DEV13_UART0, -}; - -static struct stedma40_chan_cfg uart0_dma_cfg_tx = { - .mode = STEDMA40_MODE_LOGICAL, - .dir = DMA_MEM_TO_DEV, - .dev_type = DB8500_DMA_DEV13_UART0, -}; - -static struct stedma40_chan_cfg uart1_dma_cfg_rx = { - .mode = STEDMA40_MODE_LOGICAL, - .dir = DMA_DEV_TO_MEM, - .dev_type = DB8500_DMA_DEV12_UART1, -}; - -static struct stedma40_chan_cfg uart1_dma_cfg_tx = { - .mode = STEDMA40_MODE_LOGICAL, - .dir = DMA_MEM_TO_DEV, - .dev_type = DB8500_DMA_DEV12_UART1, -}; - -static struct stedma40_chan_cfg uart2_dma_cfg_rx = { - .mode = STEDMA40_MODE_LOGICAL, - .dir = DMA_DEV_TO_MEM, - .dev_type = DB8500_DMA_DEV11_UART2, -}; - -static struct stedma40_chan_cfg uart2_dma_cfg_tx = { - .mode = STEDMA40_MODE_LOGICAL, - .dir = DMA_MEM_TO_DEV, - .dev_type = DB8500_DMA_DEV11_UART2, -}; -#endif - -struct amba_pl011_data uart0_plat = { -#ifdef CONFIG_STE_DMA40 - .dma_filter = stedma40_filter, - .dma_rx_param = &uart0_dma_cfg_rx, - .dma_tx_param = &uart0_dma_cfg_tx, -#endif -}; - -struct amba_pl011_data uart1_plat = { -#ifdef CONFIG_STE_DMA40 - .dma_filter = stedma40_filter, - .dma_rx_param = &uart1_dma_cfg_rx, - .dma_tx_param = &uart1_dma_cfg_tx, -#endif -}; - -struct amba_pl011_data uart2_plat = { -#ifdef CONFIG_STE_DMA40 - .dma_filter = stedma40_filter, - .dma_rx_param = &uart2_dma_cfg_rx, - .dma_tx_param = &uart2_dma_cfg_tx, -#endif -}; - -static void __init mop500_uart_init(struct device *parent) -{ - db8500_add_uart0(parent, &uart0_plat); - db8500_add_uart1(parent, &uart1_plat); - db8500_add_uart2(parent, &uart2_plat); -} - -static void __init u8500_cryp1_hash1_init(struct device *parent) -{ - db8500_add_cryp1(parent, &u8500_cryp1_platform_data); - db8500_add_hash1(parent, &u8500_hash1_platform_data); -} - -static struct platform_device *snowball_platform_devs[] __initdata = { - &snowball_led_dev, - &snowball_key_dev, - &snowball_sbnet_dev, - &snowball_gpio_en_3v3_regulator_dev, - &u8500_cpufreq_cooling_device, - &sdi0_regulator, -}; - -static void __init mop500_init_machine(void) -{ - struct device *parent = NULL; - int i; - - platform_device_register(&db8500_prcmu_device); - mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR; - - sdi0_reg_info.enable_gpio = GPIO_SDMMC_EN; - sdi0_reg_info.gpios[0].gpio = GPIO_SDMMC_1V8_3V_SEL; - - mop500_pinmaps_init(); - parent = u8500_init_devices(); - - for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++) - mop500_platform_devs[i]->dev.parent = parent; - - platform_add_devices(mop500_platform_devs, - ARRAY_SIZE(mop500_platform_devs)); - - mop500_i2c_init(parent); - mop500_sdi_init(parent); - mop500_spi_init(parent); - mop500_audio_init(parent); - mop500_uart_init(parent); - u8500_cryp1_hash1_init(parent); - - /* This board has full regulator constraints */ - regulator_has_full_constraints(); -} - - -static void __init snowball_init_machine(void) -{ - struct device *parent = NULL; - int i; - - platform_device_register(&db8500_prcmu_device); - - sdi0_reg_info.enable_gpio = SNOWBALL_SDMMC_EN_GPIO; - sdi0_reg_info.gpios[0].gpio = SNOWBALL_SDMMC_1V8_3V_GPIO; - - snowball_pinmaps_init(); - parent = u8500_init_devices(); - - for (i = 0; i < ARRAY_SIZE(snowball_platform_devs); i++) - snowball_platform_devs[i]->dev.parent = parent; - - platform_add_devices(snowball_platform_devs, - ARRAY_SIZE(snowball_platform_devs)); - - mop500_i2c_init(parent); - snowball_sdi_init(parent); - mop500_spi_init(parent); - mop500_audio_init(parent); - mop500_uart_init(parent); - - u8500_cryp1_hash1_init(parent); - - /* This board has full regulator constraints */ - regulator_has_full_constraints(); -} - -static void __init hrefv60_init_machine(void) -{ - struct device *parent = NULL; - int i; - - platform_device_register(&db8500_prcmu_device); - /* - * The HREFv60 board removed a GPIO expander and routed - * all these GPIO pins to the internal GPIO controller - * instead. - */ - mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO; - - sdi0_reg_info.enable_gpio = HREFV60_SDMMC_EN_GPIO; - sdi0_reg_info.gpios[0].gpio = HREFV60_SDMMC_1V8_3V_GPIO; - - hrefv60_pinmaps_init(); - parent = u8500_init_devices(); - - for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++) - mop500_platform_devs[i]->dev.parent = parent; - - platform_add_devices(mop500_platform_devs, - ARRAY_SIZE(mop500_platform_devs)); - - mop500_i2c_init(parent); - hrefv60_sdi_init(parent); - mop500_spi_init(parent); - mop500_audio_init(parent); - mop500_uart_init(parent); - - /* This board has full regulator constraints */ - regulator_has_full_constraints(); -} - -MACHINE_START(U8500, "ST-Ericsson MOP500 platform") - /* Maintainer: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> */ - .atag_offset = 0x100, - .smp = smp_ops(ux500_smp_ops), - .map_io = u8500_map_io, - .init_irq = ux500_init_irq, - /* we re-use nomadik timer here */ - .init_time = ux500_timer_init, - .init_machine = mop500_init_machine, - .init_late = ux500_init_late, - .restart = ux500_restart, -MACHINE_END - -MACHINE_START(U8520, "ST-Ericsson U8520 Platform HREFP520") - .atag_offset = 0x100, - .map_io = u8500_map_io, - .init_irq = ux500_init_irq, - .init_time = ux500_timer_init, - .init_machine = mop500_init_machine, - .init_late = ux500_init_late, - .restart = ux500_restart, -MACHINE_END - -MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+") - .atag_offset = 0x100, - .smp = smp_ops(ux500_smp_ops), - .map_io = u8500_map_io, - .init_irq = ux500_init_irq, - .init_time = ux500_timer_init, - .init_machine = hrefv60_init_machine, - .init_late = ux500_init_late, - .restart = ux500_restart, -MACHINE_END - -MACHINE_START(SNOWBALL, "Calao Systems Snowball platform") - .atag_offset = 0x100, - .smp = smp_ops(ux500_smp_ops), - .map_io = u8500_map_io, - .init_irq = ux500_init_irq, - /* we re-use nomadik timer here */ - .init_time = ux500_timer_init, - .init_machine = snowball_init_machine, - .init_late = NULL, - .restart = ux500_restart, -MACHINE_END diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h index d6fab166cbf..511d6febbe9 100644 --- a/arch/arm/mach-ux500/board-mop500.h +++ b/arch/arm/mach-ux500/board-mop500.h @@ -79,7 +79,6 @@ #define SNOWBALL_EN_3V3_ETH_GPIO MOP500_AB8500_PIN_GPIO(26) /* GPIO26 */ struct device; -struct i2c_board_info; extern struct mmci_platform_data mop500_sdi0_data; extern struct mmci_platform_data mop500_sdi1_data; extern struct mmci_platform_data mop500_sdi2_data; @@ -88,25 +87,10 @@ extern struct msp_i2s_platform_data msp0_platform_data; extern struct msp_i2s_platform_data msp1_platform_data; extern struct msp_i2s_platform_data msp2_platform_data; extern struct msp_i2s_platform_data msp3_platform_data; -extern struct arm_pmu_platdata db8500_pmu_platdata; -extern struct amba_pl011_data uart0_plat; -extern struct amba_pl011_data uart1_plat; -extern struct amba_pl011_data uart2_plat; extern struct pl022_ssp_controller ssp0_plat; -extern struct stedma40_platform_data dma40_plat_data; -extern void mop500_sdi_init(struct device *parent); -extern void snowball_sdi_init(struct device *parent); -extern void hrefv60_sdi_init(struct device *parent); -extern void mop500_sdi_tc35892_init(struct device *parent); -void __init mop500_u8500uib_init(void); -void __init mop500_stuib_init(void); void __init mop500_pinmaps_init(void); void __init snowball_pinmaps_init(void); void __init hrefv60_pinmaps_init(void); -void mop500_audio_init(struct device *parent); -int __init mop500_uib_init(void); -void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info, - unsigned n); #endif diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 301c3460d96..2e85c1e7253 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -32,7 +32,6 @@ #include "irqs.h" #include "devices-db8500.h" -#include "ste-dma40-db8500.h" #include "db8500-regs.h" #include "board-mop500.h" #include "id.h" @@ -93,14 +92,6 @@ void __init u8500_map_io(void) iotable_init(u8500_io_desc, ARRAY_SIZE(u8500_io_desc)); } -static struct resource db8500_pmu_resources[] = { - [0] = { - .start = IRQ_DB8500_PMU, - .end = IRQ_DB8500_PMU, - .flags = IORESOURCE_IRQ, - }, -}; - /* * The PMU IRQ lines of two cores are wired together into a single interrupt. * Bounce the interrupt to the other core if it's not ours. @@ -125,54 +116,6 @@ struct arm_pmu_platdata db8500_pmu_platdata = { .handle_irq = db8500_pmu_handler, }; -static struct platform_device db8500_pmu_device = { - .name = "arm-pmu", - .id = -1, - .num_resources = ARRAY_SIZE(db8500_pmu_resources), - .resource = db8500_pmu_resources, - .dev.platform_data = &db8500_pmu_platdata, -}; - -static struct platform_device *platform_devs[] __initdata = { - &u8500_dma40_device, - &db8500_pmu_device, -}; - -static resource_size_t __initdata db8500_gpio_base[] = { - U8500_GPIOBANK0_BASE, - U8500_GPIOBANK1_BASE, - U8500_GPIOBANK2_BASE, - U8500_GPIOBANK3_BASE, - U8500_GPIOBANK4_BASE, - U8500_GPIOBANK5_BASE, - U8500_GPIOBANK6_BASE, - U8500_GPIOBANK7_BASE, - U8500_GPIOBANK8_BASE, -}; - -static void __init db8500_add_gpios(struct device *parent) -{ - struct nmk_gpio_platform_data pdata = { - .supports_sleepmode = true, - }; - - dbx500_add_gpios(parent, db8500_gpio_base, - ARRAY_SIZE(db8500_gpio_base), - IRQ_DB8500_GPIO0, &pdata); - dbx500_add_pinctrl(parent, "pinctrl-db8500", U8500_PRCMU_BASE); -} - -static int usb_db8500_dma_cfg[] = { - DB8500_DMA_DEV38_USB_OTG_IEP_AND_OEP_1_9, - DB8500_DMA_DEV37_USB_OTG_IEP_AND_OEP_2_10, - DB8500_DMA_DEV36_USB_OTG_IEP_AND_OEP_3_11, - DB8500_DMA_DEV19_USB_OTG_IEP_AND_OEP_4_12, - DB8500_DMA_DEV18_USB_OTG_IEP_AND_OEP_5_13, - DB8500_DMA_DEV17_USB_OTG_IEP_AND_OEP_6_14, - DB8500_DMA_DEV16_USB_OTG_IEP_AND_OEP_7_15, - DB8500_DMA_DEV39_USB_OTG_IEP_AND_OEP_8 -}; - static const char *db8500_read_soc_id(void) { void __iomem *uid = __io_address(U8500_BB_UID_BASE); @@ -192,60 +135,22 @@ static struct device * __init db8500_soc_device_init(void) return ux500_soc_device_init(soc_id); } -/* - * This function is called from the board init - */ -struct device * __init u8500_init_devices(void) -{ - struct device *parent; - int i; - - parent = db8500_soc_device_init(); - - db8500_add_rtc(parent); - db8500_add_gpios(parent); - db8500_add_usb(parent, usb_db8500_dma_cfg, usb_db8500_dma_cfg); - - for (i = 0; i < ARRAY_SIZE(platform_devs); i++) - platform_devs[i]->dev.parent = parent; - - platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs)); - - return parent; -} - #ifdef CONFIG_MACH_UX500_DT static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { /* Requires call-back bindings. */ OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata), /* Requires DMA bindings. */ - OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", NULL), - OF_DEV_AUXDATA("arm,pl011", 0x80121000, "uart1", NULL), - OF_DEV_AUXDATA("arm,pl011", 0x80007000, "uart2", NULL), - OF_DEV_AUXDATA("arm,pl022", 0x80002000, "ssp0", &ssp0_plat), - OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0", NULL), - OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1", NULL), - OF_DEV_AUXDATA("arm,pl18x", 0x80005000, "sdi2", NULL), - OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4", NULL), - /* Requires clock name bindings. */ - OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e000, "gpio.0", NULL), - OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e080, "gpio.1", NULL), - OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e000, "gpio.2", NULL), - OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e080, "gpio.3", NULL), - OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e100, "gpio.4", NULL), - OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e180, "gpio.5", NULL), - OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e000, "gpio.6", NULL), - OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e080, "gpio.7", NULL), - OF_DEV_AUXDATA("st,nomadik-gpio", 0xa03fe000, "gpio.8", NULL), - OF_DEV_AUXDATA("st,nomadik-i2c", 0x80004000, "nmk-i2c.0", NULL), - OF_DEV_AUXDATA("st,nomadik-i2c", 0x80122000, "nmk-i2c.1", NULL), - OF_DEV_AUXDATA("st,nomadik-i2c", 0x80128000, "nmk-i2c.2", NULL), - OF_DEV_AUXDATA("st,nomadik-i2c", 0x80110000, "nmk-i2c.3", NULL), - OF_DEV_AUXDATA("st,nomadik-i2c", 0x8012a000, "nmk-i2c.4", NULL), - OF_DEV_AUXDATA("stericsson,db8500-musb", 0xa03e0000, "musb-ux500.0", NULL), + OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000, + "ux500-msp-i2s.0", &msp0_platform_data), + OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80124000, + "ux500-msp-i2s.1", &msp1_platform_data), + OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80117000, + "ux500-msp-i2s.2", &msp2_platform_data), + OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80125000, + "ux500-msp-i2s.3", &msp3_platform_data), + /* Requires non-DT:able platform data. */ OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu", &db8500_prcmu_pdata), - OF_DEV_AUXDATA("smsc,lan9115", 0x50000000, "smsc911x.0", NULL), OF_DEV_AUXDATA("stericsson,ux500-cryp", 0xa03cb000, "cryp1", NULL), OF_DEV_AUXDATA("stericsson,ux500-hash", 0xa03c2000, "hash1", NULL), OF_DEV_AUXDATA("stericsson,snd-soc-mop500", 0, "snd-soc-mop500.0", @@ -253,17 +158,6 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { /* Requires device name bindings. */ OF_DEV_AUXDATA("stericsson,db8500-pinctrl", U8500_PRCMU_BASE, "pinctrl-db8500", NULL), - /* Requires clock name and DMA bindings. */ - OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000, - "ux500-msp-i2s.0", &msp0_platform_data), - OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80124000, - "ux500-msp-i2s.1", &msp1_platform_data), - OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80117000, - "ux500-msp-i2s.2", &msp2_platform_data), - OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80125000, - "ux500-msp-i2s.3", &msp3_platform_data), - /* Requires clock name bindings and channel address lookup table. */ - OF_DEV_AUXDATA("stericsson,db8500-dma40", 0x801C0000, "dma40.0", NULL), {}, }; diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c index 5d7eebcabc6..f84d4397896 100644 --- a/arch/arm/mach-ux500/cpu.c +++ b/arch/arm/mach-ux500/cpu.c @@ -78,9 +78,17 @@ void __init ux500_init_irq(void) if (cpu_is_u8500_family()) { prcmu_early_init(U8500_PRCMU_BASE, SZ_8K - 1); ux500_pm_init(U8500_PRCMU_BASE, SZ_8K - 1); - u8500_clk_init(U8500_CLKRST1_BASE, U8500_CLKRST2_BASE, - U8500_CLKRST3_BASE, U8500_CLKRST5_BASE, - U8500_CLKRST6_BASE); + + if (of_have_populated_dt()) + u8500_of_clk_init(U8500_CLKRST1_BASE, + U8500_CLKRST2_BASE, + U8500_CLKRST3_BASE, + U8500_CLKRST5_BASE, + U8500_CLKRST6_BASE); + else + u8500_clk_init(U8500_CLKRST1_BASE, U8500_CLKRST2_BASE, + U8500_CLKRST3_BASE, U8500_CLKRST5_BASE, + U8500_CLKRST6_BASE); } else if (cpu_is_u9540()) { prcmu_early_init(U8500_PRCMU_BASE, SZ_8K - 1); ux500_pm_init(U8500_PRCMU_BASE, SZ_8K - 1); @@ -96,11 +104,6 @@ void __init ux500_init_irq(void) } } -void __init ux500_init_late(void) -{ - mop500_uib_init(); -} - static const char * __init ux500_get_machine(void) { return kasprintf(GFP_KERNEL, "DB%4x", dbx500_partnumber()); diff --git a/arch/arm/mach-ux500/devices-common.c b/arch/arm/mach-ux500/devices-common.c deleted file mode 100644 index f71b3d7bd4f..00000000000 --- a/arch/arm/mach-ux500/devices-common.c +++ /dev/null @@ -1,60 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson - * License terms: GNU General Public License (GPL), version 2. - */ - -#include <linux/kernel.h> -#include <linux/dma-mapping.h> -#include <linux/err.h> -#include <linux/irq.h> -#include <linux/slab.h> -#include <linux/platform_device.h> -#include <linux/platform_data/pinctrl-nomadik.h> - -#include "irqs.h" - -#include "devices-common.h" - -static struct platform_device * -dbx500_add_gpio(struct device *parent, int id, resource_size_t addr, int irq, - struct nmk_gpio_platform_data *pdata) -{ - struct resource resources[] = { - { - .start = addr, - .end = addr + 127, - .flags = IORESOURCE_MEM, - }, - { - .start = irq, - .end = irq, - .flags = IORESOURCE_IRQ, - } - }; - - return platform_device_register_resndata( - parent, - "gpio", - id, - resources, - ARRAY_SIZE(resources), - pdata, - sizeof(*pdata)); -} - -void dbx500_add_gpios(struct device *parent, resource_size_t *base, int num, - int irq, struct nmk_gpio_platform_data *pdata) -{ - int first = 0; - int i; - - for (i = 0; i < num; i++, first += 32, irq++) { - pdata->first_gpio = first; - pdata->first_irq = NOMADIK_GPIO_TO_IRQ(first); - pdata->num_gpio = 32; - - dbx500_add_gpio(parent, i, base[i], irq, pdata); - } -} diff --git a/arch/arm/mach-ux500/devices-common.h b/arch/arm/mach-ux500/devices-common.h deleted file mode 100644 index 96fa4ac89e2..00000000000 --- a/arch/arm/mach-ux500/devices-common.h +++ /dev/null @@ -1,149 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson - * License terms: GNU General Public License (GPL), version 2. - */ - -#ifndef __DEVICES_COMMON_H -#define __DEVICES_COMMON_H - -#include <linux/platform_device.h> -#include <linux/dma-mapping.h> -#include <linux/sys_soc.h> -#include <linux/amba/bus.h> -#include <linux/platform_data/i2c-nomadik.h> -#include <linux/platform_data/crypto-ux500.h> - -struct spi_master_cntlr; - -static inline struct amba_device * -dbx500_add_msp_spi(struct device *parent, const char *name, - resource_size_t base, int irq, - struct spi_master_cntlr *pdata) -{ - return amba_ahb_device_add(parent, name, base, SZ_4K, irq, 0, - pdata, 0); -} - -static inline struct amba_device * -dbx500_add_spi(struct device *parent, const char *name, resource_size_t base, - int irq, struct spi_master_cntlr *pdata, - u32 periphid) -{ - return amba_ahb_device_add(parent, name, base, SZ_4K, irq, 0, - pdata, periphid); -} - -struct mmci_platform_data; - -static inline struct amba_device * -dbx500_add_sdi(struct device *parent, const char *name, resource_size_t base, - int irq, struct mmci_platform_data *pdata, u32 periphid) -{ - return amba_ahb_device_add(parent, name, base, SZ_4K, irq, 0, - pdata, periphid); -} - -struct amba_pl011_data; - -static inline struct amba_device * -dbx500_add_uart(struct device *parent, const char *name, resource_size_t base, - int irq, struct amba_pl011_data *pdata) -{ - return amba_ahb_device_add(parent, name, base, SZ_4K, irq, 0, pdata, 0); -} - -struct nmk_i2c_controller; - -static inline struct amba_device * -dbx500_add_i2c(struct device *parent, int id, resource_size_t base, int irq, - struct nmk_i2c_controller *data) -{ - /* Conjure a name similar to what the platform device used to have */ - char name[16]; - - snprintf(name, sizeof(name), "nmk-i2c.%d", id); - return amba_apb_device_add(parent, name, base, SZ_4K, irq, 0, data, 0); -} - -static inline struct amba_device * -dbx500_add_rtc(struct device *parent, resource_size_t base, int irq) -{ - return amba_apb_device_add(parent, "rtc-pl031", base, SZ_4K, irq, - 0, NULL, 0); -} - -struct cryp_platform_data; - -static inline struct platform_device * -dbx500_add_cryp1(struct device *parent, int id, resource_size_t base, int irq, - struct cryp_platform_data *pdata) -{ - struct resource res[] = { - DEFINE_RES_MEM(base, SZ_4K), - DEFINE_RES_IRQ(irq), - }; - - struct platform_device_info pdevinfo = { - .parent = parent, - .name = "cryp1", - .id = id, - .res = res, - .num_res = ARRAY_SIZE(res), - .data = pdata, - .size_data = sizeof(*pdata), - .dma_mask = DMA_BIT_MASK(32), - }; - - return platform_device_register_full(&pdevinfo); -} - -struct hash_platform_data; - -static inline struct platform_device * -dbx500_add_hash1(struct device *parent, int id, resource_size_t base, - struct hash_platform_data *pdata) -{ - struct resource res[] = { - DEFINE_RES_MEM(base, SZ_4K), - }; - - struct platform_device_info pdevinfo = { - .parent = parent, - .name = "hash1", - .id = id, - .res = res, - .num_res = ARRAY_SIZE(res), - .data = pdata, - .size_data = sizeof(*pdata), - .dma_mask = DMA_BIT_MASK(32), - }; - - return platform_device_register_full(&pdevinfo); -} - -struct nmk_gpio_platform_data; - -void dbx500_add_gpios(struct device *parent, resource_size_t *base, int num, - int irq, struct nmk_gpio_platform_data *pdata); - -static inline void -dbx500_add_pinctrl(struct device *parent, const char *name, - resource_size_t base) -{ - struct resource res[] = { - DEFINE_RES_MEM(base, SZ_8K), - }; - struct platform_device_info pdevinfo = { - .parent = parent, - .name = name, - .id = -1, - .res = res, - .num_res = ARRAY_SIZE(res), - }; - - platform_device_register_full(&pdevinfo); -} - -#endif diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c index bc316062e0c..c59f89d058f 100644 --- a/arch/arm/mach-ux500/devices-db8500.c +++ b/arch/arm/mach-ux500/devices-db8500.c @@ -9,10 +9,8 @@ #include <linux/platform_device.h> #include <linux/interrupt.h> #include <linux/io.h> -#include <linux/gpio.h> #include <linux/amba/bus.h> #include <linux/amba/pl022.h> -#include <linux/platform_data/dma-ste-dma40.h> #include <linux/mfd/dbx500-prcmu.h> #include "setup.h" @@ -20,62 +18,6 @@ #include "db8500-regs.h" #include "devices-db8500.h" -#include "ste-dma40-db8500.h" - -static struct resource dma40_resources[] = { - [0] = { - .start = U8500_DMA_BASE, - .end = U8500_DMA_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - .name = "base", - }, - [1] = { - .start = U8500_DMA_LCPA_BASE, - .end = U8500_DMA_LCPA_BASE + 2 * SZ_1K - 1, - .flags = IORESOURCE_MEM, - .name = "lcpa", - }, - [2] = { - .start = IRQ_DB8500_DMA, - .end = IRQ_DB8500_DMA, - .flags = IORESOURCE_IRQ, - } -}; - -struct stedma40_platform_data dma40_plat_data = { - .disabled_channels = {-1}, -}; - -struct platform_device u8500_dma40_device = { - .dev = { - .platform_data = &dma40_plat_data, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .name = "dma40", - .id = 0, - .num_resources = ARRAY_SIZE(dma40_resources), - .resource = dma40_resources -}; - -struct resource keypad_resources[] = { - [0] = { - .start = U8500_SKE_BASE, - .end = U8500_SKE_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_DB8500_KB, - .end = IRQ_DB8500_KB, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device u8500_ske_keypad_device = { - .name = "nmk-ske-keypad", - .id = -1, - .num_resources = ARRAY_SIZE(keypad_resources), - .resource = keypad_resources, -}; struct prcmu_pdata db8500_prcmu_pdata = { .ab_platdata = &ab8500_platdata, @@ -84,39 +26,3 @@ struct prcmu_pdata db8500_prcmu_pdata = { .version_offset = DB8500_PRCMU_FW_VERSION_OFFSET, .legacy_offset = DB8500_PRCMU_LEGACY_OFFSET, }; - -static struct resource db8500_prcmu_res[] = { - { - .name = "prcmu", - .start = U8500_PRCMU_BASE, - .end = U8500_PRCMU_BASE + SZ_8K - 1, - .flags = IORESOURCE_MEM, - }, - { - .name = "prcmu-tcdm", - .start = U8500_PRCMU_TCDM_BASE, - .end = U8500_PRCMU_TCDM_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - { - .name = "irq", - .start = IRQ_DB8500_PRCMU1, - .end = IRQ_DB8500_PRCMU1, - .flags = IORESOURCE_IRQ, - }, - { - .name = "prcmu-tcpm", - .start = U8500_PRCMU_TCPM_BASE, - .end = U8500_PRCMU_TCPM_BASE + SZ_32K - 1, - .flags = IORESOURCE_MEM, - }, -}; - -struct platform_device db8500_prcmu_device = { - .name = "db8500-prcmu", - .resource = db8500_prcmu_res, - .num_resources = ARRAY_SIZE(db8500_prcmu_res), - .dev = { - .platform_data = &db8500_prcmu_pdata, - }, -}; diff --git a/arch/arm/mach-ux500/devices-db8500.h b/arch/arm/mach-ux500/devices-db8500.h index 321998320f9..b8ffc9979bb 100644 --- a/arch/arm/mach-ux500/devices-db8500.h +++ b/arch/arm/mach-ux500/devices-db8500.h @@ -8,122 +8,12 @@ #ifndef __DEVICES_DB8500_H #define __DEVICES_DB8500_H -#include <linux/platform_data/usb-musb-ux500.h> #include "irqs.h" #include "db8500-regs.h" -#include "devices-common.h" -struct ske_keypad_platform_data; -struct pl022_ssp_controller; struct platform_device; extern struct ab8500_platform_data ab8500_platdata; extern struct prcmu_pdata db8500_prcmu_pdata; -extern struct platform_device db8500_prcmu_device; -static inline struct platform_device * -db8500_add_ske_keypad(struct device *parent, - struct ske_keypad_platform_data *pdata, - size_t size) -{ - struct resource resources[] = { - DEFINE_RES_MEM(U8500_SKE_BASE, SZ_4K), - DEFINE_RES_IRQ(IRQ_DB8500_KB), - }; - - return platform_device_register_resndata(parent, "nmk-ske-keypad", -1, - resources, 2, pdata, size); -} - -static inline struct amba_device * -db8500_add_ssp(struct device *parent, const char *name, resource_size_t base, - int irq, struct pl022_ssp_controller *pdata) -{ - return amba_ahb_device_add(parent, name, base, SZ_4K, irq, 0, pdata, 0); -} - -#define db8500_add_i2c0(parent, pdata) \ - dbx500_add_i2c(parent, 0, U8500_I2C0_BASE, IRQ_DB8500_I2C0, pdata) -#define db8500_add_i2c1(parent, pdata) \ - dbx500_add_i2c(parent, 1, U8500_I2C1_BASE, IRQ_DB8500_I2C1, pdata) -#define db8500_add_i2c2(parent, pdata) \ - dbx500_add_i2c(parent, 2, U8500_I2C2_BASE, IRQ_DB8500_I2C2, pdata) -#define db8500_add_i2c3(parent, pdata) \ - dbx500_add_i2c(parent, 3, U8500_I2C3_BASE, IRQ_DB8500_I2C3, pdata) -#define db8500_add_i2c4(parent, pdata) \ - dbx500_add_i2c(parent, 4, U8500_I2C4_BASE, IRQ_DB8500_I2C4, pdata) - -#define db8500_add_msp0_spi(parent, pdata) \ - dbx500_add_msp_spi(parent, "msp0", U8500_MSP0_BASE, \ - IRQ_DB8500_MSP0, pdata) -#define db8500_add_msp1_spi(parent, pdata) \ - dbx500_add_msp_spi(parent, "msp1", U8500_MSP1_BASE, \ - IRQ_DB8500_MSP1, pdata) -#define db8500_add_msp2_spi(parent, pdata) \ - dbx500_add_msp_spi(parent, "msp2", U8500_MSP2_BASE, \ - IRQ_DB8500_MSP2, pdata) -#define db8500_add_msp3_spi(parent, pdata) \ - dbx500_add_msp_spi(parent, "msp3", U8500_MSP3_BASE, \ - IRQ_DB8500_MSP1, pdata) - -#define db8500_add_rtc(parent) \ - dbx500_add_rtc(parent, U8500_RTC_BASE, IRQ_DB8500_RTC); - -#define db8500_add_usb(parent, rx_cfg, tx_cfg) \ - ux500_add_usb(parent, U8500_USBOTG_BASE, \ - IRQ_DB8500_USBOTG, rx_cfg, tx_cfg) - -#define db8500_add_sdi0(parent, pdata, pid) \ - dbx500_add_sdi(parent, "sdi0", U8500_SDI0_BASE, \ - IRQ_DB8500_SDMMC0, pdata, pid) -#define db8500_add_sdi1(parent, pdata, pid) \ - dbx500_add_sdi(parent, "sdi1", U8500_SDI1_BASE, \ - IRQ_DB8500_SDMMC1, pdata, pid) -#define db8500_add_sdi2(parent, pdata, pid) \ - dbx500_add_sdi(parent, "sdi2", U8500_SDI2_BASE, \ - IRQ_DB8500_SDMMC2, pdata, pid) -#define db8500_add_sdi3(parent, pdata, pid) \ - dbx500_add_sdi(parent, "sdi3", U8500_SDI3_BASE, \ - IRQ_DB8500_SDMMC3, pdata, pid) -#define db8500_add_sdi4(parent, pdata, pid) \ - dbx500_add_sdi(parent, "sdi4", U8500_SDI4_BASE, \ - IRQ_DB8500_SDMMC4, pdata, pid) -#define db8500_add_sdi5(parent, pdata, pid) \ - dbx500_add_sdi(parent, "sdi5", U8500_SDI5_BASE, \ - IRQ_DB8500_SDMMC5, pdata, pid) - -#define db8500_add_ssp0(parent, pdata) \ - db8500_add_ssp(parent, "ssp0", U8500_SSP0_BASE, \ - IRQ_DB8500_SSP0, pdata) -#define db8500_add_ssp1(parent, pdata) \ - db8500_add_ssp(parent, "ssp1", U8500_SSP1_BASE, \ - IRQ_DB8500_SSP1, pdata) - -#define db8500_add_spi0(parent, pdata) \ - dbx500_add_spi(parent, "spi0", U8500_SPI0_BASE, \ - IRQ_DB8500_SPI0, pdata, 0) -#define db8500_add_spi1(parent, pdata) \ - dbx500_add_spi(parent, "spi1", U8500_SPI1_BASE, \ - IRQ_DB8500_SPI1, pdata, 0) -#define db8500_add_spi2(parent, pdata) \ - dbx500_add_spi(parent, "spi2", U8500_SPI2_BASE, \ - IRQ_DB8500_SPI2, pdata, 0) -#define db8500_add_spi3(parent, pdata) \ - dbx500_add_spi(parent, "spi3", U8500_SPI3_BASE, \ - IRQ_DB8500_SPI3, pdata, 0) - -#define db8500_add_uart0(parent, pdata) \ - dbx500_add_uart(parent, "uart0", U8500_UART0_BASE, \ - IRQ_DB8500_UART0, pdata) -#define db8500_add_uart1(parent, pdata) \ - dbx500_add_uart(parent, "uart1", U8500_UART1_BASE, \ - IRQ_DB8500_UART1, pdata) -#define db8500_add_uart2(parent, pdata) \ - dbx500_add_uart(parent, "uart2", U8500_UART2_BASE, \ - IRQ_DB8500_UART2, pdata) - -#define db8500_add_cryp1(parent, pdata) \ - dbx500_add_cryp1(parent, -1, U8500_CRYP1_BASE, IRQ_DB8500_CRYP1, pdata) -#define db8500_add_hash1(parent, pdata) \ - dbx500_add_hash1(parent, -1, U8500_HASH1_BASE, pdata) #endif diff --git a/arch/arm/mach-ux500/devices.h b/arch/arm/mach-ux500/devices.h index cbc6f1e4104..5bca7c605cd 100644 --- a/arch/arm/mach-ux500/devices.h +++ b/arch/arm/mach-ux500/devices.h @@ -10,14 +10,6 @@ struct platform_device; struct amba_device; -extern struct platform_device u8500_gpio_devs[]; - extern struct amba_device ux500_pl031_device; -extern struct platform_device ux500_hash1_device; -extern struct platform_device ux500_cryp1_device; - -extern struct platform_device u8500_dma40_device; -extern struct platform_device ux500_ske_keypad_device; - #endif diff --git a/arch/arm/mach-ux500/setup.h b/arch/arm/mach-ux500/setup.h index 656324aad18..bdb356498a7 100644 --- a/arch/arm/mach-ux500/setup.h +++ b/arch/arm/mach-ux500/setup.h @@ -24,7 +24,6 @@ extern void __init u8500_map_io(void); extern struct device * __init u8500_init_devices(void); extern void __init ux500_init_irq(void); -extern void __init ux500_init_late(void); extern struct device *ux500_soc_device_init(const char *soc_id); diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c index b6bd0efcbe6..05a4ff78b3b 100644 --- a/arch/arm/mach-ux500/timer.c +++ b/arch/arm/mach-ux500/timer.c @@ -97,8 +97,8 @@ dt_fail: * sched_clock with higher rating then MTU since is always-on. * */ - - nmdk_timer_init(mtu_timer_base, IRQ_MTU0); + if (!of_have_populated_dt()) + nmdk_timer_init(mtu_timer_base, IRQ_MTU0); clksrc_dbx500_prcmu_init(prcmu_timer_base); ux500_twd_init(); } diff --git a/arch/arm/mach-ux500/usb.c b/arch/arm/mach-ux500/usb.c deleted file mode 100644 index b7bd8d3a550..00000000000 --- a/arch/arm/mach-ux500/usb.c +++ /dev/null @@ -1,135 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2011 - * - * Author: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> - * License terms: GNU General Public License (GPL) version 2 - */ -#include <linux/platform_device.h> -#include <linux/usb/musb.h> -#include <linux/dma-mapping.h> -#include <linux/platform_data/usb-musb-ux500.h> -#include <linux/platform_data/dma-ste-dma40.h> - -#include "db8500-regs.h" - -#define MUSB_DMA40_RX_CH { \ - .mode = STEDMA40_MODE_LOGICAL, \ - .dir = DMA_DEV_TO_MEM, \ - } - -#define MUSB_DMA40_TX_CH { \ - .mode = STEDMA40_MODE_LOGICAL, \ - .dir = DMA_MEM_TO_DEV, \ - } - -static struct stedma40_chan_cfg musb_dma_rx_ch[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS] - = { - MUSB_DMA40_RX_CH, - MUSB_DMA40_RX_CH, - MUSB_DMA40_RX_CH, - MUSB_DMA40_RX_CH, - MUSB_DMA40_RX_CH, - MUSB_DMA40_RX_CH, - MUSB_DMA40_RX_CH, - MUSB_DMA40_RX_CH -}; - -static struct stedma40_chan_cfg musb_dma_tx_ch[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS] - = { - MUSB_DMA40_TX_CH, - MUSB_DMA40_TX_CH, - MUSB_DMA40_TX_CH, - MUSB_DMA40_TX_CH, - MUSB_DMA40_TX_CH, - MUSB_DMA40_TX_CH, - MUSB_DMA40_TX_CH, - MUSB_DMA40_TX_CH, -}; - -static void *ux500_dma_rx_param_array[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS] = { - &musb_dma_rx_ch[0], - &musb_dma_rx_ch[1], - &musb_dma_rx_ch[2], - &musb_dma_rx_ch[3], - &musb_dma_rx_ch[4], - &musb_dma_rx_ch[5], - &musb_dma_rx_ch[6], - &musb_dma_rx_ch[7] -}; - -static void *ux500_dma_tx_param_array[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS] = { - &musb_dma_tx_ch[0], - &musb_dma_tx_ch[1], - &musb_dma_tx_ch[2], - &musb_dma_tx_ch[3], - &musb_dma_tx_ch[4], - &musb_dma_tx_ch[5], - &musb_dma_tx_ch[6], - &musb_dma_tx_ch[7] -}; - -static struct ux500_musb_board_data musb_board_data = { - .dma_rx_param_array = ux500_dma_rx_param_array, - .dma_tx_param_array = ux500_dma_tx_param_array, - .dma_filter = stedma40_filter, -}; - -static struct musb_hdrc_platform_data musb_platform_data = { - .mode = MUSB_OTG, - .board_data = &musb_board_data, -}; - -static struct resource usb_resources[] = { - [0] = { - .name = "usb-mem", - .flags = IORESOURCE_MEM, - }, - - [1] = { - .name = "mc", /* hard-coded in musb */ - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device ux500_musb_device = { - .name = "musb-ux500", - .id = 0, - .dev = { - .platform_data = &musb_platform_data, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .num_resources = ARRAY_SIZE(usb_resources), - .resource = usb_resources, -}; - -static inline void ux500_usb_dma_update_rx_ch_config(int *dev_type) -{ - u32 idx; - - for (idx = 0; idx < UX500_MUSB_DMA_NUM_RX_TX_CHANNELS; idx++) - musb_dma_rx_ch[idx].dev_type = dev_type[idx]; -} - -static inline void ux500_usb_dma_update_tx_ch_config(int *dev_type) -{ - u32 idx; - - for (idx = 0; idx < UX500_MUSB_DMA_NUM_RX_TX_CHANNELS; idx++) - musb_dma_tx_ch[idx].dev_type = dev_type[idx]; -} - -void ux500_add_usb(struct device *parent, resource_size_t base, int irq, - int *dma_rx_cfg, int *dma_tx_cfg) -{ - ux500_musb_device.resource[0].start = base; - ux500_musb_device.resource[0].end = base + SZ_64K - 1; - ux500_musb_device.resource[1].start = irq; - ux500_musb_device.resource[1].end = irq; - - ux500_usb_dma_update_rx_ch_config(dma_rx_cfg); - ux500_usb_dma_update_tx_ch_config(dma_tx_cfg); - - ux500_musb_device.dev.parent = parent; - - platform_device_register(&ux500_musb_device); -} diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig index 36579544780..d7e7422527c 100644 --- a/arch/arm/mach-vexpress/Kconfig +++ b/arch/arm/mach-vexpress/Kconfig @@ -4,14 +4,12 @@ config ARCH_VEXPRESS select ARM_AMBA select ARM_GIC select ARM_TIMER_SP804 - select CLKDEV_LOOKUP select COMMON_CLK select COMMON_CLK_VERSATILE select CPU_V7 select GENERIC_CLOCKEVENTS select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP - select HAVE_CLK select HAVE_PATA_PLATFORM select HAVE_SMP select ICST diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c index 95a469e23e3..4f8b8cb17ff 100644 --- a/arch/arm/mach-vexpress/v2m.c +++ b/arch/arm/mach-vexpress/v2m.c @@ -1,12 +1,10 @@ /* * Versatile Express V2M Motherboard Support */ -#include <linux/clocksource.h> #include <linux/device.h> #include <linux/amba/bus.h> #include <linux/amba/mmci.h> #include <linux/io.h> -#include <linux/clocksource.h> #include <linux/smp.h> #include <linux/init.h> #include <linux/of_address.h> @@ -22,7 +20,6 @@ #include <linux/regulator/fixed.h> #include <linux/regulator/machine.h> #include <linux/vexpress.h> -#include <linux/clk-provider.h> #include <linux/clkdev.h> #include <asm/mach-types.h> @@ -422,16 +419,8 @@ void __init v2m_dt_init_early(void) pr_warning("vexpress: DT HBI (%x) is not matching " "hardware (%x)!\n", dt_hbi, hbi); } -} - -static void __init v2m_dt_timer_init(void) -{ - of_clk_init(NULL); - clocksource_of_init(); - - versatile_sched_clock_init(vexpress_get_24mhz_clock_base(), - 24000000); + versatile_sched_clock_init(vexpress_get_24mhz_clock_base(), 24000000); } static const struct of_device_id v2m_dt_bus_match[] __initconst = { @@ -458,6 +447,5 @@ DT_MACHINE_START(VEXPRESS_DT, "ARM-Versatile Express") .smp_init = smp_init_ops(vexpress_smp_init_ops), .map_io = v2m_dt_map_io, .init_early = v2m_dt_init_early, - .init_time = v2m_dt_timer_init, .init_machine = v2m_dt_init, MACHINE_END diff --git a/arch/arm/mach-vt8500/Kconfig b/arch/arm/mach-vt8500/Kconfig index 9b252934b20..927be93b692 100644 --- a/arch/arm/mach-vt8500/Kconfig +++ b/arch/arm/mach-vt8500/Kconfig @@ -5,7 +5,6 @@ config ARCH_VT8500 select CLKDEV_LOOKUP select CLKSRC_OF select GENERIC_CLOCKEVENTS - select HAVE_CLK select VT8500_TIMER select PINCTRL help diff --git a/arch/arm/mach-vt8500/common.h b/arch/arm/mach-vt8500/common.h deleted file mode 100644 index 087787af62f..00000000000 --- a/arch/arm/mach-vt8500/common.h +++ /dev/null @@ -1,24 +0,0 @@ -/* linux/arch/arm/mach-vt8500/dt_common.h - * - * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __ARCH_ARM_MACH_VT8500_DT_COMMON_H -#define __ARCH_ARM_MACH_VT8500_DT_COMMON_H - -#include <linux/of.h> - -/* defined in drivers/clk/clk-vt8500.c */ -void __init vtwm_clk_init(void __iomem *pmc_base); - -#endif diff --git a/arch/arm/mach-vt8500/vt8500.c b/arch/arm/mach-vt8500/vt8500.c index eefaa60d661..4a73464cb11 100644 --- a/arch/arm/mach-vt8500/vt8500.c +++ b/arch/arm/mach-vt8500/vt8500.c @@ -18,7 +18,6 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#include <linux/clocksource.h> #include <linux/io.h> #include <linux/pm.h> #include <linux/reboot.h> @@ -33,8 +32,6 @@ #include <linux/of_irq.h> #include <linux/of_platform.h> -#include "common.h" - #define LEGACY_GPIO_BASE 0xD8110000 #define LEGACY_PMC_BASE 0xD8130000 @@ -162,8 +159,6 @@ void __init vt8500_init(void) else pr_err("%s: PMC Hibernation register could not be remapped, not enabling power off!\n", __func__); - vtwm_clk_init(pmc_base); - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } @@ -180,7 +175,6 @@ DT_MACHINE_START(WMT_DT, "VIA/Wondermedia SoC (Device Tree Support)") .dt_compat = vt8500_dt_compat, .map_io = vt8500_map_io, .init_machine = vt8500_init, - .init_time = clocksource_of_init, .restart = vt8500_restart, MACHINE_END diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c index f50d223a0bd..99b44e0e8d8 100644 --- a/arch/arm/net/bpf_jit_32.c +++ b/arch/arm/net/bpf_jit_32.c @@ -930,4 +930,5 @@ void bpf_jit_free(struct sk_filter *fp) { if (fp->bpf_func != sk_run_filter) module_free(NULL, fp->bpf_func); + kfree(fp); } diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index 037660633fa..01619c2910e 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -1965,7 +1965,6 @@ static irqreturn_t omap2_dma_irq_handler(int irq, void *dev_id) static struct irqaction omap24xx_dma_irq = { .name = "DMA", .handler = omap2_dma_irq_handler, - .flags = IRQF_DISABLED }; #else diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index 7dfba937d8f..6d95d60276d 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -382,11 +382,6 @@ config S5P_DEV_TV help Compile in platform device definition for TV interface -config S5P_DEV_USB_EHCI - bool - help - Compile in platform device definition for USB EHCI - config S3C24XX_PWM bool "PWM device support" select PWM @@ -395,11 +390,6 @@ config S3C24XX_PWM Support for exporting the PWM timer blocks via the pwm device system -config S5P_SETUP_MIPIPHY - bool - help - Compile in common setup code for MIPI-CSIS and MIPI-DSIM devices - config S3C_SETUP_CAMIF bool help diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile index 498c7c23e9f..9267d29549b 100644 --- a/arch/arm/plat-samsung/Makefile +++ b/arch/arm/plat-samsung/Makefile @@ -38,7 +38,6 @@ obj-$(CONFIG_S5P_DEV_UART) += s5p-dev-uart.o obj-$(CONFIG_SAMSUNG_DEV_BACKLIGHT) += dev-backlight.o obj-$(CONFIG_S3C_SETUP_CAMIF) += setup-camif.o -obj-$(CONFIG_S5P_SETUP_MIPIPHY) += setup-mipiphy.o # DMA support diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index 8ce0ac007eb..99a3590f034 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -32,6 +32,7 @@ #include <linux/ioport.h> #include <linux/platform_data/s3c-hsudc.h> #include <linux/platform_data/s3c-hsotg.h> +#include <linux/platform_data/dma-s3c24xx.h> #include <media/s5p_hdmi.h> @@ -49,7 +50,6 @@ #include <plat/devs.h> #include <plat/adc.h> #include <linux/platform_data/ata-samsung_cf.h> -#include <linux/platform_data/usb-ehci-s5p.h> #include <plat/fb.h> #include <plat/fb-s3c2410.h> #include <plat/hdmi.h> @@ -1359,39 +1359,6 @@ void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *pd) } #endif /* CONFIG_PLAT_S3C24XX */ -/* USB EHCI Host Controller */ - -#ifdef CONFIG_S5P_DEV_USB_EHCI -static struct resource s5p_ehci_resource[] = { - [0] = DEFINE_RES_MEM(S5P_PA_EHCI, SZ_256), - [1] = DEFINE_RES_IRQ(IRQ_USB_HOST), -}; - -struct platform_device s5p_device_ehci = { - .name = "s5p-ehci", - .id = -1, - .num_resources = ARRAY_SIZE(s5p_ehci_resource), - .resource = s5p_ehci_resource, - .dev = { - .dma_mask = &samsung_device_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - } -}; - -void __init s5p_ehci_set_platdata(struct s5p_ehci_platdata *pd) -{ - struct s5p_ehci_platdata *npd; - - npd = s3c_set_platdata(pd, sizeof(struct s5p_ehci_platdata), - &s5p_device_ehci); - - if (!npd->phy_init) - npd->phy_init = s5p_usb_phy_init; - if (!npd->phy_exit) - npd->phy_exit = s5p_usb_phy_exit; -} -#endif /* CONFIG_S5P_DEV_USB_EHCI */ - /* USB HSOTG */ #ifdef CONFIG_S3C_DEV_USB_HSOTG @@ -1499,8 +1466,10 @@ void __init s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, pd.num_cs = num_cs; pd.src_clk_nr = src_clk_nr; pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi0_cfg_gpio; -#ifdef CONFIG_PL330_DMA +#if defined(CONFIG_PL330_DMA) pd.filter = pl330_filter; +#elif defined(CONFIG_S3C24XX_DMAC) + pd.filter = s3c24xx_dma_filter; #endif s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi0); diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h index 4fb1f03a10d..335beb34135 100644 --- a/arch/arm/plat-samsung/include/plat/cpu.h +++ b/arch/arm/plat-samsung/include/plat/cpu.h @@ -87,8 +87,12 @@ IS_SAMSUNG_CPU(exynos5440, EXYNOS5440_SOC_ID, EXYNOS5_SOC_MASK) #endif #if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410) +# define soc_is_s3c6400() is_samsung_s3c6400() +# define soc_is_s3c6410() is_samsung_s3c6410() # define soc_is_s3c64xx() (is_samsung_s3c6400() || is_samsung_s3c6410()) #else +# define soc_is_s3c6400() 0 +# define soc_is_s3c6410() 0 # define soc_is_s3c64xx() 0 #endif diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h index 0dc4ac4909b..eece188ed18 100644 --- a/arch/arm/plat-samsung/include/plat/devs.h +++ b/arch/arm/plat-samsung/include/plat/devs.h @@ -75,7 +75,6 @@ extern struct platform_device s3c_device_usb_hsotg; extern struct platform_device s3c_device_usb_hsudc; extern struct platform_device s3c_device_wdt; -extern struct platform_device s5p_device_ehci; extern struct platform_device s5p_device_fimc0; extern struct platform_device s5p_device_fimc1; extern struct platform_device s5p_device_fimc2; diff --git a/arch/arm/plat-samsung/init.c b/arch/arm/plat-samsung/init.c index 50a3ea0037d..aa9511b6914 100644 --- a/arch/arm/plat-samsung/init.c +++ b/arch/arm/plat-samsung/init.c @@ -11,12 +11,18 @@ * published by the Free Software Foundation. */ +/* + * NOTE: Code in this file is not used on S3C64xx when booting with + * Device Tree support. + */ + #include <linux/init.h> #include <linux/module.h> #include <linux/interrupt.h> #include <linux/ioport.h> #include <linux/serial_core.h> #include <linux/platform_device.h> +#include <linux/of.h> #include <mach/hardware.h> @@ -148,8 +154,12 @@ static int __init s3c_arch_init(void) // do the correct init for cpu - if (cpu == NULL) + if (cpu == NULL) { + /* Not needed when booting with device tree. */ + if (of_have_populated_dt()) + return 0; panic("s3c_arch_init: NULL cpu\n"); + } ret = (cpu->init)(); if (ret != 0) diff --git a/arch/arm/plat-samsung/setup-mipiphy.c b/arch/arm/plat-samsung/setup-mipiphy.c deleted file mode 100644 index 66df315990a..00000000000 --- a/arch/arm/plat-samsung/setup-mipiphy.c +++ /dev/null @@ -1,60 +0,0 @@ -/* - * Copyright (C) 2011 Samsung Electronics Co., Ltd. - * - * S5P - Helper functions for MIPI-CSIS and MIPI-DSIM D-PHY control - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/export.h> -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/spinlock.h> -#include <mach/regs-clock.h> - -static int __s5p_mipi_phy_control(int id, bool on, u32 reset) -{ - static DEFINE_SPINLOCK(lock); - void __iomem *addr; - unsigned long flags; - u32 cfg; - - id = max(0, id); - if (id > 1) - return -EINVAL; - - addr = S5P_MIPI_DPHY_CONTROL(id); - - spin_lock_irqsave(&lock, flags); - - cfg = __raw_readl(addr); - cfg = on ? (cfg | reset) : (cfg & ~reset); - __raw_writel(cfg, addr); - - if (on) { - cfg |= S5P_MIPI_DPHY_ENABLE; - } else if (!(cfg & (S5P_MIPI_DPHY_SRESETN | - S5P_MIPI_DPHY_MRESETN) & ~reset)) { - cfg &= ~S5P_MIPI_DPHY_ENABLE; - } - - __raw_writel(cfg, addr); - spin_unlock_irqrestore(&lock, flags); - - return 0; -} - -int s5p_csis_phy_enable(int id, bool on) -{ - return __s5p_mipi_phy_control(id, on, S5P_MIPI_DPHY_SRESETN); -} -EXPORT_SYMBOL(s5p_csis_phy_enable); - -int s5p_dsim_phy_enable(struct platform_device *pdev, bool on) -{ - return __s5p_mipi_phy_control(pdev->id, on, S5P_MIPI_DPHY_MRESETN); -} -EXPORT_SYMBOL(s5p_dsim_phy_enable); diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index c04454876bc..ce6ae949749 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -1,6 +1,7 @@ config ARM64 def_bool y select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE + select ARCH_USE_CMPXCHG_LOCKREF select ARCH_WANT_OPTIONAL_GPIOLIB select ARCH_WANT_COMPAT_IPC_PARSE_VERSION select ARCH_WANT_FRAME_POINTERS @@ -61,10 +62,6 @@ config LOCKDEP_SUPPORT config TRACE_IRQFLAGS_SUPPORT def_bool y -config GENERIC_LOCKBREAK - def_bool y - depends on SMP && PREEMPT - config RWSEM_GENERIC_SPINLOCK def_bool y @@ -138,6 +135,11 @@ config ARM64_64K_PAGES look-up. AArch32 emulation is not available when this feature is enabled. +config CPU_BIG_ENDIAN + bool "Build big-endian kernel" + help + Say Y if you plan on running a kernel in big-endian mode. + config SMP bool "Symmetric Multi-Processing" select USE_GENERIC_SMP_HELPERS @@ -160,6 +162,13 @@ config NR_CPUS default "8" if ARCH_XGENE default "4" +config HOTPLUG_CPU + bool "Support for hot-pluggable CPUs" + depends on SMP + help + Say Y here to experiment with turning CPUs off and on. CPUs + can be controlled through /sys/devices/system/cpu. + source kernel/Kconfig.preempt config HZ diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile index d90cf79f233..2fceb71ac3b 100644 --- a/arch/arm64/Makefile +++ b/arch/arm64/Makefile @@ -20,9 +20,15 @@ LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name) KBUILD_DEFCONFIG := defconfig KBUILD_CFLAGS += -mgeneral-regs-only +ifeq ($(CONFIG_CPU_BIG_ENDIAN), y) +KBUILD_CPPFLAGS += -mbig-endian +AS += -EB +LD += -EB +else KBUILD_CPPFLAGS += -mlittle-endian AS += -EL LD += -EL +endif comma = , diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 31c81e9b792..84139be62ae 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -26,7 +26,7 @@ CONFIG_MODULE_UNLOAD=y CONFIG_ARCH_VEXPRESS=y CONFIG_ARCH_XGENE=y CONFIG_SMP=y -CONFIG_PREEMPT_VOLUNTARY=y +CONFIG_PREEMPT=y CONFIG_CMDLINE="console=ttyAMA0" # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_COMPAT=y diff --git a/arch/arm64/include/asm/assembler.h b/arch/arm64/include/asm/assembler.h index 5aceb83b3f5..fd3e3924041 100644 --- a/arch/arm64/include/asm/assembler.h +++ b/arch/arm64/include/asm/assembler.h @@ -115,3 +115,34 @@ lr .req x30 // link register .align 7 b \label .endm + +/* + * Select code when configured for BE. + */ +#ifdef CONFIG_CPU_BIG_ENDIAN +#define CPU_BE(code...) code +#else +#define CPU_BE(code...) +#endif + +/* + * Select code when configured for LE. + */ +#ifdef CONFIG_CPU_BIG_ENDIAN +#define CPU_LE(code...) +#else +#define CPU_LE(code...) code +#endif + +/* + * Define a macro that constructs a 64-bit value by concatenating two + * 32-bit registers. Note that on big endian systems the order of the + * registers is swapped. + */ +#ifndef CONFIG_CPU_BIG_ENDIAN + .macro regs_to_64, rd, lbits, hbits +#else + .macro regs_to_64, rd, hbits, lbits +#endif + orr \rd, \lbits, \hbits, lsl #32 + .endm diff --git a/arch/arm64/include/asm/cmpxchg.h b/arch/arm64/include/asm/cmpxchg.h index 8a8ce0e73a3..3914c0dcd09 100644 --- a/arch/arm64/include/asm/cmpxchg.h +++ b/arch/arm64/include/asm/cmpxchg.h @@ -173,4 +173,6 @@ static inline unsigned long __cmpxchg_mb(volatile void *ptr, unsigned long old, #define cmpxchg64(ptr,o,n) cmpxchg((ptr),(o),(n)) #define cmpxchg64_local(ptr,o,n) cmpxchg_local((ptr),(o),(n)) +#define cmpxchg64_relaxed(ptr,o,n) cmpxchg_local((ptr),(o),(n)) + #endif /* __ASM_CMPXCHG_H */ diff --git a/arch/arm64/include/asm/compat.h b/arch/arm64/include/asm/compat.h index 899af807ef0..fda2704b3f9 100644 --- a/arch/arm64/include/asm/compat.h +++ b/arch/arm64/include/asm/compat.h @@ -26,7 +26,11 @@ #include <linux/ptrace.h> #define COMPAT_USER_HZ 100 +#ifdef __AARCH64EB__ +#define COMPAT_UTS_MACHINE "armv8b\0\0" +#else #define COMPAT_UTS_MACHINE "armv8l\0\0" +#endif typedef u32 compat_size_t; typedef s32 compat_ssize_t; @@ -73,13 +77,23 @@ struct compat_timeval { }; struct compat_stat { +#ifdef __AARCH64EB__ + short st_dev; + short __pad1; +#else compat_dev_t st_dev; +#endif compat_ino_t st_ino; compat_mode_t st_mode; compat_ushort_t st_nlink; __compat_uid16_t st_uid; __compat_gid16_t st_gid; +#ifdef __AARCH64EB__ + short st_rdev; + short __pad2; +#else compat_dev_t st_rdev; +#endif compat_off_t st_size; compat_off_t st_blksize; compat_off_t st_blocks; diff --git a/arch/arm64/include/asm/cpu_ops.h b/arch/arm64/include/asm/cpu_ops.h new file mode 100644 index 00000000000..c4cdb5e5b73 --- /dev/null +++ b/arch/arm64/include/asm/cpu_ops.h @@ -0,0 +1,59 @@ +/* + * Copyright (C) 2013 ARM Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#ifndef __ASM_CPU_OPS_H +#define __ASM_CPU_OPS_H + +#include <linux/init.h> +#include <linux/threads.h> + +struct device_node; + +/** + * struct cpu_operations - Callback operations for hotplugging CPUs. + * + * @name: Name of the property as appears in a devicetree cpu node's + * enable-method property. + * @cpu_init: Reads any data necessary for a specific enable-method from the + * devicetree, for a given cpu node and proposed logical id. + * @cpu_prepare: Early one-time preparation step for a cpu. If there is a + * mechanism for doing so, tests whether it is possible to boot + * the given CPU. + * @cpu_boot: Boots a cpu into the kernel. + * @cpu_postboot: Optionally, perform any post-boot cleanup or necesary + * synchronisation. Called from the cpu being booted. + * @cpu_disable: Prepares a cpu to die. May fail for some mechanism-specific + * reason, which will cause the hot unplug to be aborted. Called + * from the cpu to be killed. + * @cpu_die: Makes a cpu leave the kernel. Must not fail. Called from the + * cpu being killed. + */ +struct cpu_operations { + const char *name; + int (*cpu_init)(struct device_node *, unsigned int); + int (*cpu_prepare)(unsigned int); + int (*cpu_boot)(unsigned int); + void (*cpu_postboot)(void); +#ifdef CONFIG_HOTPLUG_CPU + int (*cpu_disable)(unsigned int cpu); + void (*cpu_die)(unsigned int cpu); +#endif +}; + +extern const struct cpu_operations *cpu_ops[NR_CPUS]; +extern int __init cpu_read_ops(struct device_node *dn, int cpu); +extern void __init cpu_read_bootcpu_ops(void); + +#endif /* ifndef __ASM_CPU_OPS_H */ diff --git a/arch/arm64/include/asm/elf.h b/arch/arm64/include/asm/elf.h index e7fa87f9201..01d3aab64b7 100644 --- a/arch/arm64/include/asm/elf.h +++ b/arch/arm64/include/asm/elf.h @@ -90,11 +90,24 @@ typedef struct user_fpsimd_state elf_fpregset_t; * These are used to set parameters in the core dumps. */ #define ELF_CLASS ELFCLASS64 +#ifdef __AARCH64EB__ +#define ELF_DATA ELFDATA2MSB +#else #define ELF_DATA ELFDATA2LSB +#endif #define ELF_ARCH EM_AARCH64 +/* + * This yields a string that ld.so will use to load implementation + * specific libraries for optimization. This is more specific in + * intent than poking at uname or /proc/cpuinfo. + */ #define ELF_PLATFORM_SIZE 16 +#ifdef __AARCH64EB__ +#define ELF_PLATFORM ("aarch64_be") +#else #define ELF_PLATFORM ("aarch64") +#endif /* * This is used to ensure we don't load something for the wrong architecture. @@ -149,7 +162,12 @@ extern unsigned long arch_randomize_brk(struct mm_struct *mm); #define arch_randomize_brk arch_randomize_brk #ifdef CONFIG_COMPAT + +#ifdef __AARCH64EB__ +#define COMPAT_ELF_PLATFORM ("v8b") +#else #define COMPAT_ELF_PLATFORM ("v8l") +#endif #define COMPAT_ELF_ET_DYN_BASE (randomize_et_dyn(2 * TASK_SIZE_32 / 3)) diff --git a/arch/arm64/include/asm/io.h b/arch/arm64/include/asm/io.h index 1d12f89140b..b56e5b5df88 100644 --- a/arch/arm64/include/asm/io.h +++ b/arch/arm64/include/asm/io.h @@ -224,6 +224,7 @@ extern void __memset_io(volatile void __iomem *, int, size_t); */ extern void __iomem *__ioremap(phys_addr_t phys_addr, size_t size, pgprot_t prot); extern void __iounmap(volatile void __iomem *addr); +extern void __iomem *ioremap_cache(phys_addr_t phys_addr, size_t size); #define PROT_DEFAULT (PTE_TYPE_PAGE | PTE_AF | PTE_DIRTY) #define PROT_DEVICE_nGnRE (PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_ATTRINDX(MT_DEVICE_nGnRE)) @@ -233,7 +234,6 @@ extern void __iounmap(volatile void __iomem *addr); #define ioremap(addr, size) __ioremap((addr), (size), __pgprot(PROT_DEVICE_nGnRE)) #define ioremap_nocache(addr, size) __ioremap((addr), (size), __pgprot(PROT_DEVICE_nGnRE)) #define ioremap_wc(addr, size) __ioremap((addr), (size), __pgprot(PROT_NORMAL_NC)) -#define ioremap_cached(addr, size) __ioremap((addr), (size), __pgprot(PROT_NORMAL)) #define iounmap __iounmap #define PROT_SECT_DEFAULT (PMD_TYPE_SECT | PMD_SECT_AF) diff --git a/arch/arm64/include/asm/irq.h b/arch/arm64/include/asm/irq.h index 0332fc077f6..e1f7ecdde11 100644 --- a/arch/arm64/include/asm/irq.h +++ b/arch/arm64/include/asm/irq.h @@ -4,6 +4,7 @@ #include <asm-generic/irq.h> extern void (*handle_arch_irq)(struct pt_regs *); +extern void migrate_irqs(void); extern void set_handle_irq(void (*handle_irq)(struct pt_regs *)); #endif diff --git a/arch/arm64/include/asm/memory.h b/arch/arm64/include/asm/memory.h index 20925bcf4e2..37762175896 100644 --- a/arch/arm64/include/asm/memory.h +++ b/arch/arm64/include/asm/memory.h @@ -33,18 +33,23 @@ #define UL(x) _AC(x, UL) /* - * PAGE_OFFSET - the virtual address of the start of the kernel image. + * PAGE_OFFSET - the virtual address of the start of the kernel image (top + * (VA_BITS - 1)) * VA_BITS - the maximum number of bits for virtual addresses. * TASK_SIZE - the maximum size of a user space task. * TASK_UNMAPPED_BASE - the lower boundary of the mmap VM area. * The module space lives between the addresses given by TASK_SIZE * and PAGE_OFFSET - it must be within 128MB of the kernel text. */ -#define PAGE_OFFSET UL(0xffffffc000000000) +#ifdef CONFIG_ARM64_64K_PAGES +#define VA_BITS (42) +#else +#define VA_BITS (39) +#endif +#define PAGE_OFFSET (UL(0xffffffffffffffff) << (VA_BITS - 1)) #define MODULES_END (PAGE_OFFSET) #define MODULES_VADDR (MODULES_END - SZ_64M) #define EARLYCON_IOBASE (MODULES_VADDR - SZ_4M) -#define VA_BITS (39) #define TASK_SIZE_64 (UL(1) << VA_BITS) #ifdef CONFIG_COMPAT diff --git a/arch/arm64/include/asm/pgtable-2level-hwdef.h b/arch/arm64/include/asm/pgtable-2level-hwdef.h index 0a8ed3f94e9..2593b490c56 100644 --- a/arch/arm64/include/asm/pgtable-2level-hwdef.h +++ b/arch/arm64/include/asm/pgtable-2level-hwdef.h @@ -21,10 +21,10 @@ * 8192 entries of 8 bytes each, occupying a 64KB page. Levels 0 and 1 are not * used. The 2nd level table (PGD for Linux) can cover a range of 4TB, each * entry representing 512MB. The user and kernel address spaces are limited to - * 512GB and therefore we only use 1024 entries in the PGD. + * 4TB in the 64KB page configuration. */ #define PTRS_PER_PTE 8192 -#define PTRS_PER_PGD 1024 +#define PTRS_PER_PGD 8192 /* * PGDIR_SHIFT determines the size a top-level page table entry can map. diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h index f0bebc5e22c..17bd3af0a11 100644 --- a/arch/arm64/include/asm/pgtable.h +++ b/arch/arm64/include/asm/pgtable.h @@ -33,7 +33,7 @@ /* * VMALLOC and SPARSEMEM_VMEMMAP ranges. */ -#define VMALLOC_START UL(0xffffff8000000000) +#define VMALLOC_START (UL(0xffffffffffffffff) << VA_BITS) #define VMALLOC_END (PAGE_OFFSET - UL(0x400000000) - SZ_64K) #define vmemmap ((struct page *)(VMALLOC_END + SZ_64K)) diff --git a/arch/arm64/include/asm/processor.h b/arch/arm64/include/asm/processor.h index ab239b2c456..45b20cd6cbc 100644 --- a/arch/arm64/include/asm/processor.h +++ b/arch/arm64/include/asm/processor.h @@ -107,6 +107,11 @@ static inline void compat_start_thread(struct pt_regs *regs, unsigned long pc, regs->pstate = COMPAT_PSR_MODE_USR; if (pc & 1) regs->pstate |= COMPAT_PSR_T_BIT; + +#ifdef __AARCH64EB__ + regs->pstate |= COMPAT_PSR_E_BIT; +#endif + regs->compat_sp = sp; } #endif diff --git a/arch/arm64/include/asm/psci.h b/arch/arm64/include/asm/psci.h index 0604237ecd9..e5312ea0ec1 100644 --- a/arch/arm64/include/asm/psci.h +++ b/arch/arm64/include/asm/psci.h @@ -14,25 +14,6 @@ #ifndef __ASM_PSCI_H #define __ASM_PSCI_H -#define PSCI_POWER_STATE_TYPE_STANDBY 0 -#define PSCI_POWER_STATE_TYPE_POWER_DOWN 1 - -struct psci_power_state { - u16 id; - u8 type; - u8 affinity_level; -}; - -struct psci_operations { - int (*cpu_suspend)(struct psci_power_state state, - unsigned long entry_point); - int (*cpu_off)(struct psci_power_state state); - int (*cpu_on)(unsigned long cpuid, unsigned long entry_point); - int (*migrate)(unsigned long cpuid); -}; - -extern struct psci_operations psci_ops; - int psci_init(void); #endif /* __ASM_PSCI_H */ diff --git a/arch/arm64/include/asm/ptrace.h b/arch/arm64/include/asm/ptrace.h index 0dacbbf9458..0e7fa496373 100644 --- a/arch/arm64/include/asm/ptrace.h +++ b/arch/arm64/include/asm/ptrace.h @@ -42,6 +42,7 @@ #define COMPAT_PSR_MODE_UND 0x0000001b #define COMPAT_PSR_MODE_SYS 0x0000001f #define COMPAT_PSR_T_BIT 0x00000020 +#define COMPAT_PSR_E_BIT 0x00000200 #define COMPAT_PSR_F_BIT 0x00000040 #define COMPAT_PSR_I_BIT 0x00000080 #define COMPAT_PSR_A_BIT 0x00000100 diff --git a/arch/arm64/include/asm/smp.h b/arch/arm64/include/asm/smp.h index 4b8023c5d14..a498f2cd2c2 100644 --- a/arch/arm64/include/asm/smp.h +++ b/arch/arm64/include/asm/smp.h @@ -60,21 +60,14 @@ struct secondary_data { void *stack; }; extern struct secondary_data secondary_data; -extern void secondary_holding_pen(void); -extern volatile unsigned long secondary_holding_pen_release; +extern void secondary_entry(void); extern void arch_send_call_function_single_ipi(int cpu); extern void arch_send_call_function_ipi_mask(const struct cpumask *mask); -struct device_node; +extern int __cpu_disable(void); -struct smp_enable_ops { - const char *name; - int (*init_cpu)(struct device_node *, int); - int (*prepare_cpu)(int); -}; - -extern const struct smp_enable_ops smp_spin_table_ops; -extern const struct smp_enable_ops smp_psci_ops; +extern void __cpu_die(unsigned int cpu); +extern void cpu_die(void); #endif /* ifndef __ASM_SMP_H */ diff --git a/arch/arm64/include/asm/spinlock.h b/arch/arm64/include/asm/spinlock.h index 0defa0728a9..3d5cf064d7a 100644 --- a/arch/arm64/include/asm/spinlock.h +++ b/arch/arm64/include/asm/spinlock.h @@ -22,17 +22,10 @@ /* * Spinlock implementation. * - * The old value is read exclusively and the new one, if unlocked, is written - * exclusively. In case of failure, the loop is restarted. - * * The memory barriers are implicit with the load-acquire and store-release * instructions. - * - * Unlocked value: 0 - * Locked value: 1 */ -#define arch_spin_is_locked(x) ((x)->lock != 0) #define arch_spin_unlock_wait(lock) \ do { while (arch_spin_is_locked(lock)) cpu_relax(); } while (0) @@ -41,32 +34,51 @@ static inline void arch_spin_lock(arch_spinlock_t *lock) { unsigned int tmp; + arch_spinlock_t lockval, newval; asm volatile( - " sevl\n" - "1: wfe\n" - "2: ldaxr %w0, %1\n" - " cbnz %w0, 1b\n" - " stxr %w0, %w2, %1\n" - " cbnz %w0, 2b\n" - : "=&r" (tmp), "+Q" (lock->lock) - : "r" (1) - : "cc", "memory"); + /* Atomically increment the next ticket. */ +" prfm pstl1strm, %3\n" +"1: ldaxr %w0, %3\n" +" add %w1, %w0, %w5\n" +" stxr %w2, %w1, %3\n" +" cbnz %w2, 1b\n" + /* Did we get the lock? */ +" eor %w1, %w0, %w0, ror #16\n" +" cbz %w1, 3f\n" + /* + * No: spin on the owner. Send a local event to avoid missing an + * unlock before the exclusive load. + */ +" sevl\n" +"2: wfe\n" +" ldaxrh %w2, %4\n" +" eor %w1, %w2, %w0, lsr #16\n" +" cbnz %w1, 2b\n" + /* We got the lock. Critical section starts here. */ +"3:" + : "=&r" (lockval), "=&r" (newval), "=&r" (tmp), "+Q" (*lock) + : "Q" (lock->owner), "I" (1 << TICKET_SHIFT) + : "memory"); } static inline int arch_spin_trylock(arch_spinlock_t *lock) { unsigned int tmp; + arch_spinlock_t lockval; asm volatile( - "2: ldaxr %w0, %1\n" - " cbnz %w0, 1f\n" - " stxr %w0, %w2, %1\n" - " cbnz %w0, 2b\n" - "1:\n" - : "=&r" (tmp), "+Q" (lock->lock) - : "r" (1) - : "cc", "memory"); +" prfm pstl1strm, %2\n" +"1: ldaxr %w0, %2\n" +" eor %w1, %w0, %w0, ror #16\n" +" cbnz %w1, 2f\n" +" add %w0, %w0, %3\n" +" stxr %w1, %w0, %2\n" +" cbnz %w1, 1b\n" +"2:" + : "=&r" (lockval), "=&r" (tmp), "+Q" (*lock) + : "I" (1 << TICKET_SHIFT) + : "memory"); return !tmp; } @@ -74,9 +86,28 @@ static inline int arch_spin_trylock(arch_spinlock_t *lock) static inline void arch_spin_unlock(arch_spinlock_t *lock) { asm volatile( - " stlr %w1, %0\n" - : "=Q" (lock->lock) : "r" (0) : "memory"); +" stlrh %w1, %0\n" + : "=Q" (lock->owner) + : "r" (lock->owner + 1) + : "memory"); +} + +static inline int arch_spin_value_unlocked(arch_spinlock_t lock) +{ + return lock.owner == lock.next; +} + +static inline int arch_spin_is_locked(arch_spinlock_t *lock) +{ + return !arch_spin_value_unlocked(ACCESS_ONCE(*lock)); +} + +static inline int arch_spin_is_contended(arch_spinlock_t *lock) +{ + arch_spinlock_t lockval = ACCESS_ONCE(*lock); + return (lockval.next - lockval.owner) > 1; } +#define arch_spin_is_contended arch_spin_is_contended /* * Write lock implementation. diff --git a/arch/arm64/include/asm/spinlock_types.h b/arch/arm64/include/asm/spinlock_types.h index 9a494346efe..b8d383665f5 100644 --- a/arch/arm64/include/asm/spinlock_types.h +++ b/arch/arm64/include/asm/spinlock_types.h @@ -20,14 +20,19 @@ # error "please don't include this file directly" #endif -/* We only require natural alignment for exclusive accesses. */ -#define __lock_aligned +#define TICKET_SHIFT 16 typedef struct { - volatile unsigned int lock; -} arch_spinlock_t; +#ifdef __AARCH64EB__ + u16 next; + u16 owner; +#else + u16 owner; + u16 next; +#endif +} __aligned(4) arch_spinlock_t; -#define __ARCH_SPIN_LOCK_UNLOCKED { 0 } +#define __ARCH_SPIN_LOCK_UNLOCKED { 0 , 0 } typedef struct { volatile unsigned int lock; diff --git a/arch/arm64/include/asm/syscall.h b/arch/arm64/include/asm/syscall.h index 89c047f9a97..70ba9d4ee97 100644 --- a/arch/arm64/include/asm/syscall.h +++ b/arch/arm64/include/asm/syscall.h @@ -59,6 +59,9 @@ static inline void syscall_get_arguments(struct task_struct *task, unsigned int i, unsigned int n, unsigned long *args) { + if (n == 0) + return; + if (i + n > SYSCALL_MAX_ARGS) { unsigned long *args_bad = args + SYSCALL_MAX_ARGS - i; unsigned int n_bad = n + i - SYSCALL_MAX_ARGS; @@ -82,6 +85,9 @@ static inline void syscall_set_arguments(struct task_struct *task, unsigned int i, unsigned int n, const unsigned long *args) { + if (n == 0) + return; + if (i + n > SYSCALL_MAX_ARGS) { pr_warning("%s called with max args %d, handling only %d\n", __func__, i + n, SYSCALL_MAX_ARGS); diff --git a/arch/arm64/include/asm/virt.h b/arch/arm64/include/asm/virt.h index 26e310c5434..130e2be952c 100644 --- a/arch/arm64/include/asm/virt.h +++ b/arch/arm64/include/asm/virt.h @@ -18,7 +18,8 @@ #ifndef __ASM__VIRT_H #define __ASM__VIRT_H -#define BOOT_CPU_MODE_EL2 (0x0e12b007) +#define BOOT_CPU_MODE_EL1 (0xe11) +#define BOOT_CPU_MODE_EL2 (0xe12) #ifndef __ASSEMBLY__ #include <asm/cacheflush.h> diff --git a/arch/arm64/include/uapi/asm/byteorder.h b/arch/arm64/include/uapi/asm/byteorder.h index 2b92046aafc..dc19e9537f0 100644 --- a/arch/arm64/include/uapi/asm/byteorder.h +++ b/arch/arm64/include/uapi/asm/byteorder.h @@ -16,6 +16,10 @@ #ifndef __ASM_BYTEORDER_H #define __ASM_BYTEORDER_H +#ifdef __AARCH64EB__ +#include <linux/byteorder/big_endian.h> +#else #include <linux/byteorder/little_endian.h> +#endif #endif /* __ASM_BYTEORDER_H */ diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile index 7b4b564961d..5ba2fd43a75 100644 --- a/arch/arm64/kernel/Makefile +++ b/arch/arm64/kernel/Makefile @@ -9,12 +9,12 @@ AFLAGS_head.o := -DTEXT_OFFSET=$(TEXT_OFFSET) arm64-obj-y := cputable.o debug-monitors.o entry.o irq.o fpsimd.o \ entry-fpsimd.o process.o ptrace.o setup.o signal.o \ sys.o stacktrace.o time.o traps.o io.o vdso.o \ - hyp-stub.o psci.o + hyp-stub.o psci.o cpu_ops.o arm64-obj-$(CONFIG_COMPAT) += sys32.o kuser32.o signal32.o \ sys_compat.o arm64-obj-$(CONFIG_MODULES) += arm64ksyms.o module.o -arm64-obj-$(CONFIG_SMP) += smp.o smp_spin_table.o smp_psci.o +arm64-obj-$(CONFIG_SMP) += smp.o smp_spin_table.o arm64-obj-$(CONFIG_HW_PERF_EVENTS) += perf_event.o arm64-obj-$(CONFIG_HAVE_HW_BREAKPOINT)+= hw_breakpoint.o arm64-obj-$(CONFIG_EARLY_PRINTK) += early_printk.o diff --git a/arch/arm64/kernel/arm64ksyms.c b/arch/arm64/kernel/arm64ksyms.c index 41b4f626d55..e7ee770c069 100644 --- a/arch/arm64/kernel/arm64ksyms.c +++ b/arch/arm64/kernel/arm64ksyms.c @@ -39,6 +39,7 @@ EXPORT_SYMBOL(clear_page); EXPORT_SYMBOL(__copy_from_user); EXPORT_SYMBOL(__copy_to_user); EXPORT_SYMBOL(__clear_user); +EXPORT_SYMBOL(__copy_in_user); /* physical memory */ EXPORT_SYMBOL(memstart_addr); diff --git a/arch/arm64/kernel/cpu_ops.c b/arch/arm64/kernel/cpu_ops.c new file mode 100644 index 00000000000..d62d12fb36c --- /dev/null +++ b/arch/arm64/kernel/cpu_ops.c @@ -0,0 +1,87 @@ +/* + * CPU kernel entry/exit control + * + * Copyright (C) 2013 ARM Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <asm/cpu_ops.h> +#include <asm/smp_plat.h> +#include <linux/errno.h> +#include <linux/of.h> +#include <linux/string.h> + +extern const struct cpu_operations smp_spin_table_ops; +extern const struct cpu_operations cpu_psci_ops; + +const struct cpu_operations *cpu_ops[NR_CPUS]; + +static const struct cpu_operations *supported_cpu_ops[] __initconst = { +#ifdef CONFIG_SMP + &smp_spin_table_ops, + &cpu_psci_ops, +#endif + NULL, +}; + +static const struct cpu_operations * __init cpu_get_ops(const char *name) +{ + const struct cpu_operations **ops = supported_cpu_ops; + + while (*ops) { + if (!strcmp(name, (*ops)->name)) + return *ops; + + ops++; + } + + return NULL; +} + +/* + * Read a cpu's enable method from the device tree and record it in cpu_ops. + */ +int __init cpu_read_ops(struct device_node *dn, int cpu) +{ + const char *enable_method = of_get_property(dn, "enable-method", NULL); + if (!enable_method) { + /* + * The boot CPU may not have an enable method (e.g. when + * spin-table is used for secondaries). Don't warn spuriously. + */ + if (cpu != 0) + pr_err("%s: missing enable-method property\n", + dn->full_name); + return -ENOENT; + } + + cpu_ops[cpu] = cpu_get_ops(enable_method); + if (!cpu_ops[cpu]) { + pr_warn("%s: unsupported enable-method property: %s\n", + dn->full_name, enable_method); + return -EOPNOTSUPP; + } + + return 0; +} + +void __init cpu_read_bootcpu_ops(void) +{ + struct device_node *dn = of_get_cpu_node(0, NULL); + if (!dn) { + pr_err("Failed to find device node for boot cpu\n"); + return; + } + cpu_read_ops(dn, 0); +} diff --git a/arch/arm64/kernel/cputable.c b/arch/arm64/kernel/cputable.c index 63cfc4a43f4..fd3993cb060 100644 --- a/arch/arm64/kernel/cputable.c +++ b/arch/arm64/kernel/cputable.c @@ -22,7 +22,7 @@ extern unsigned long __cpu_setup(void); -struct cpu_info __initdata cpu_table[] = { +struct cpu_info cpu_table[] = { { .cpu_id_val = 0x000f0000, .cpu_id_mask = 0x000f0000, diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S index 3881fd115eb..e1166145ca2 100644 --- a/arch/arm64/kernel/entry.S +++ b/arch/arm64/kernel/entry.S @@ -311,14 +311,14 @@ el1_irq: #endif #ifdef CONFIG_PREEMPT get_thread_info tsk - ldr x24, [tsk, #TI_PREEMPT] // get preempt count - add x0, x24, #1 // increment it - str x0, [tsk, #TI_PREEMPT] + ldr w24, [tsk, #TI_PREEMPT] // get preempt count + add w0, w24, #1 // increment it + str w0, [tsk, #TI_PREEMPT] #endif irq_handler #ifdef CONFIG_PREEMPT - str x24, [tsk, #TI_PREEMPT] // restore preempt count - cbnz x24, 1f // preempt count != 0 + str w24, [tsk, #TI_PREEMPT] // restore preempt count + cbnz w24, 1f // preempt count != 0 ldr x0, [tsk, #TI_FLAGS] // get flags tbz x0, #TIF_NEED_RESCHED, 1f // needs rescheduling? bl el1_preempt @@ -509,15 +509,15 @@ el0_irq_naked: #endif get_thread_info tsk #ifdef CONFIG_PREEMPT - ldr x24, [tsk, #TI_PREEMPT] // get preempt count - add x23, x24, #1 // increment it - str x23, [tsk, #TI_PREEMPT] + ldr w24, [tsk, #TI_PREEMPT] // get preempt count + add w23, w24, #1 // increment it + str w23, [tsk, #TI_PREEMPT] #endif irq_handler #ifdef CONFIG_PREEMPT - ldr x0, [tsk, #TI_PREEMPT] - str x24, [tsk, #TI_PREEMPT] - cmp x0, x23 + ldr w0, [tsk, #TI_PREEMPT] + str w24, [tsk, #TI_PREEMPT] + cmp w0, w23 b.eq 1f mov x1, #0 str x1, [x1] // BUG diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S index 7090c126797..7009387348b 100644 --- a/arch/arm64/kernel/head.S +++ b/arch/arm64/kernel/head.S @@ -123,8 +123,9 @@ ENTRY(stext) mov x21, x0 // x21=FDT + bl el2_setup // Drop to EL1, w20=cpu_boot_mode bl __calc_phys_offset // x24=PHYS_OFFSET, x28=PHYS_OFFSET-PAGE_OFFSET - bl el2_setup // Drop to EL1 + bl set_cpu_boot_mode_flag mrs x22, midr_el1 // x22=cpuid mov x0, x22 bl lookup_processor_type @@ -150,21 +151,30 @@ ENDPROC(stext) /* * If we're fortunate enough to boot at EL2, ensure that the world is * sane before dropping to EL1. + * + * Returns either BOOT_CPU_MODE_EL1 or BOOT_CPU_MODE_EL2 in x20 if + * booted in EL1 or EL2 respectively. */ ENTRY(el2_setup) mrs x0, CurrentEL cmp x0, #PSR_MODE_EL2t ccmp x0, #PSR_MODE_EL2h, #0x4, ne - ldr x0, =__boot_cpu_mode // Compute __boot_cpu_mode - add x0, x0, x28 - b.eq 1f - str wzr, [x0] // Remember we don't have EL2... + b.ne 1f + mrs x0, sctlr_el2 +CPU_BE( orr x0, x0, #(1 << 25) ) // Set the EE bit for EL2 +CPU_LE( bic x0, x0, #(1 << 25) ) // Clear the EE bit for EL2 + msr sctlr_el2, x0 + b 2f +1: mrs x0, sctlr_el1 +CPU_BE( orr x0, x0, #(3 << 24) ) // Set the EE and E0E bits for EL1 +CPU_LE( bic x0, x0, #(3 << 24) ) // Clear the EE and E0E bits for EL1 + msr sctlr_el1, x0 + mov w20, #BOOT_CPU_MODE_EL1 // This cpu booted in EL1 + isb ret /* Hyp configuration. */ -1: ldr w1, =BOOT_CPU_MODE_EL2 - str w1, [x0, #4] // This CPU has EL2 - mov x0, #(1 << 31) // 64-bit EL1 +2: mov x0, #(1 << 31) // 64-bit EL1 msr hcr_el2, x0 /* Generic timers. */ @@ -181,7 +191,8 @@ ENTRY(el2_setup) /* sctlr_el1 */ mov x0, #0x0800 // Set/clear RES{1,0} bits - movk x0, #0x30d0, lsl #16 +CPU_BE( movk x0, #0x33d0, lsl #16 ) // Set EE and E0E on BE systems +CPU_LE( movk x0, #0x30d0, lsl #16 ) // Clear EE and E0E on LE systems msr sctlr_el1, x0 /* Coprocessor traps. */ @@ -204,10 +215,25 @@ ENTRY(el2_setup) PSR_MODE_EL1h) msr spsr_el2, x0 msr elr_el2, lr + mov w20, #BOOT_CPU_MODE_EL2 // This CPU booted in EL2 eret ENDPROC(el2_setup) /* + * Sets the __boot_cpu_mode flag depending on the CPU boot mode passed + * in x20. See arch/arm64/include/asm/virt.h for more info. + */ +ENTRY(set_cpu_boot_mode_flag) + ldr x1, =__boot_cpu_mode // Compute __boot_cpu_mode + add x1, x1, x28 + cmp w20, #BOOT_CPU_MODE_EL2 + b.ne 1f + add x1, x1, #4 +1: str w20, [x1] // This CPU has booted in EL1 + ret +ENDPROC(set_cpu_boot_mode_flag) + +/* * We need to find out the CPU boot mode long after boot, so we need to * store it in a writable variable. * @@ -225,7 +251,6 @@ ENTRY(__boot_cpu_mode) .quad PAGE_OFFSET #ifdef CONFIG_SMP - .pushsection .smp.pen.text, "ax" .align 3 1: .quad . .quad secondary_holding_pen_release @@ -235,8 +260,9 @@ ENTRY(__boot_cpu_mode) * cores are held until we're ready for them to initialise. */ ENTRY(secondary_holding_pen) - bl __calc_phys_offset // x24=phys offset - bl el2_setup // Drop to EL1 + bl el2_setup // Drop to EL1, w20=cpu_boot_mode + bl __calc_phys_offset // x24=PHYS_OFFSET, x28=PHYS_OFFSET-PAGE_OFFSET + bl set_cpu_boot_mode_flag mrs x0, mpidr_el1 ldr x1, =MPIDR_HWID_BITMASK and x0, x0, x1 @@ -250,7 +276,16 @@ pen: ldr x4, [x3] wfe b pen ENDPROC(secondary_holding_pen) - .popsection + + /* + * Secondary entry point that jumps straight into the kernel. Only to + * be used where CPUs are brought online dynamically by the kernel. + */ +ENTRY(secondary_entry) + bl __calc_phys_offset // x2=phys offset + bl el2_setup // Drop to EL1 + b secondary_startup +ENDPROC(secondary_entry) ENTRY(secondary_startup) /* diff --git a/arch/arm64/kernel/irq.c b/arch/arm64/kernel/irq.c index ecb3354292e..473e5dbf8f3 100644 --- a/arch/arm64/kernel/irq.c +++ b/arch/arm64/kernel/irq.c @@ -81,3 +81,64 @@ void __init init_IRQ(void) if (!handle_arch_irq) panic("No interrupt controller found."); } + +#ifdef CONFIG_HOTPLUG_CPU +static bool migrate_one_irq(struct irq_desc *desc) +{ + struct irq_data *d = irq_desc_get_irq_data(desc); + const struct cpumask *affinity = d->affinity; + struct irq_chip *c; + bool ret = false; + + /* + * If this is a per-CPU interrupt, or the affinity does not + * include this CPU, then we have nothing to do. + */ + if (irqd_is_per_cpu(d) || !cpumask_test_cpu(smp_processor_id(), affinity)) + return false; + + if (cpumask_any_and(affinity, cpu_online_mask) >= nr_cpu_ids) { + affinity = cpu_online_mask; + ret = true; + } + + c = irq_data_get_irq_chip(d); + if (!c->irq_set_affinity) + pr_debug("IRQ%u: unable to set affinity\n", d->irq); + else if (c->irq_set_affinity(d, affinity, true) == IRQ_SET_MASK_OK && ret) + cpumask_copy(d->affinity, affinity); + + return ret; +} + +/* + * The current CPU has been marked offline. Migrate IRQs off this CPU. + * If the affinity settings do not allow other CPUs, force them onto any + * available CPU. + * + * Note: we must iterate over all IRQs, whether they have an attached + * action structure or not, as we need to get chained interrupts too. + */ +void migrate_irqs(void) +{ + unsigned int i; + struct irq_desc *desc; + unsigned long flags; + + local_irq_save(flags); + + for_each_irq_desc(i, desc) { + bool affinity_broken; + + raw_spin_lock(&desc->lock); + affinity_broken = migrate_one_irq(desc); + raw_spin_unlock(&desc->lock); + + if (affinity_broken) + pr_warn_ratelimited("IRQ%u no longer affine to CPU%u\n", + i, smp_processor_id()); + } + + local_irq_restore(flags); +} +#endif /* CONFIG_HOTPLUG_CPU */ diff --git a/arch/arm64/kernel/kuser32.S b/arch/arm64/kernel/kuser32.S index 8b69ecb1d8b..63c48ffdf23 100644 --- a/arch/arm64/kernel/kuser32.S +++ b/arch/arm64/kernel/kuser32.S @@ -27,6 +27,9 @@ * * See Documentation/arm/kernel_user_helpers.txt for formal definitions. */ + +#include <asm/unistd32.h> + .align 5 .globl __kuser_helper_start __kuser_helper_start: @@ -35,33 +38,30 @@ __kuser_cmpxchg64: // 0xffff0f60 .inst 0xe92d00f0 // push {r4, r5, r6, r7} .inst 0xe1c040d0 // ldrd r4, r5, [r0] .inst 0xe1c160d0 // ldrd r6, r7, [r1] - .inst 0xf57ff05f // dmb sy - .inst 0xe1b20f9f // 1: ldrexd r0, r1, [r2] + .inst 0xe1b20e9f // 1: ldaexd r0, r1, [r2] .inst 0xe0303004 // eors r3, r0, r4 .inst 0x00313005 // eoreqs r3, r1, r5 - .inst 0x01a23f96 // strexdeq r3, r6, [r2] + .inst 0x01a23e96 // stlexdeq r3, r6, [r2] .inst 0x03330001 // teqeq r3, #1 .inst 0x0afffff9 // beq 1b - .inst 0xf57ff05f // dmb sy .inst 0xe2730000 // rsbs r0, r3, #0 .inst 0xe8bd00f0 // pop {r4, r5, r6, r7} .inst 0xe12fff1e // bx lr .align 5 __kuser_memory_barrier: // 0xffff0fa0 - .inst 0xf57ff05f // dmb sy + .inst 0xf57ff05b // dmb ish .inst 0xe12fff1e // bx lr .align 5 __kuser_cmpxchg: // 0xffff0fc0 - .inst 0xf57ff05f // dmb sy - .inst 0xe1923f9f // 1: ldrex r3, [r2] + .inst 0xe1923e9f // 1: ldaex r3, [r2] .inst 0xe0533000 // subs r3, r3, r0 - .inst 0x01823f91 // strexeq r3, r1, [r2] + .inst 0x01823e91 // stlexeq r3, r1, [r2] .inst 0x03330001 // teqeq r3, #1 .inst 0x0afffffa // beq 1b .inst 0xe2730000 // rsbs r0, r3, #0 - .inst 0xeaffffef // b <__kuser_memory_barrier> + .inst 0xe12fff1e // bx lr .align 5 __kuser_get_tls: // 0xffff0fe0 @@ -75,3 +75,42 @@ __kuser_helper_version: // 0xffff0ffc .word ((__kuser_helper_end - __kuser_helper_start) >> 5) .globl __kuser_helper_end __kuser_helper_end: + +/* + * AArch32 sigreturn code + * + * For ARM syscalls, the syscall number has to be loaded into r7. + * We do not support an OABI userspace. + * + * For Thumb syscalls, we also pass the syscall number via r7. We therefore + * need two 16-bit instructions. + */ + .globl __aarch32_sigret_code_start +__aarch32_sigret_code_start: + + /* + * ARM Code + */ + .byte __NR_compat_sigreturn, 0x70, 0xa0, 0xe3 // mov r7, #__NR_compat_sigreturn + .byte __NR_compat_sigreturn, 0x00, 0x00, 0xef // svc #__NR_compat_sigreturn + + /* + * Thumb code + */ + .byte __NR_compat_sigreturn, 0x27 // svc #__NR_compat_sigreturn + .byte __NR_compat_sigreturn, 0xdf // mov r7, #__NR_compat_sigreturn + + /* + * ARM code + */ + .byte __NR_compat_rt_sigreturn, 0x70, 0xa0, 0xe3 // mov r7, #__NR_compat_rt_sigreturn + .byte __NR_compat_rt_sigreturn, 0x00, 0x00, 0xef // svc #__NR_compat_rt_sigreturn + + /* + * Thumb code + */ + .byte __NR_compat_rt_sigreturn, 0x27 // svc #__NR_compat_rt_sigreturn + .byte __NR_compat_rt_sigreturn, 0xdf // mov r7, #__NR_compat_rt_sigreturn + + .globl __aarch32_sigret_code_end +__aarch32_sigret_code_end: diff --git a/arch/arm64/kernel/module.c b/arch/arm64/kernel/module.c index ca0e3d55da9..2c28a6cf93e 100644 --- a/arch/arm64/kernel/module.c +++ b/arch/arm64/kernel/module.c @@ -111,6 +111,9 @@ static u32 encode_insn_immediate(enum aarch64_imm_type type, u32 insn, u64 imm) u32 immlo, immhi, lomask, himask, mask; int shift; + /* The instruction stream is always little endian. */ + insn = le32_to_cpu(insn); + switch (type) { case INSN_IMM_MOVNZ: /* @@ -179,7 +182,7 @@ static u32 encode_insn_immediate(enum aarch64_imm_type type, u32 insn, u64 imm) insn &= ~(mask << shift); insn |= (imm & mask) << shift; - return insn; + return cpu_to_le32(insn); } static int reloc_insn_movw(enum aarch64_reloc_op op, void *place, u64 val, diff --git a/arch/arm64/kernel/perf_event.c b/arch/arm64/kernel/perf_event.c index cea1594ff93..5d14470452a 100644 --- a/arch/arm64/kernel/perf_event.c +++ b/arch/arm64/kernel/perf_event.c @@ -784,8 +784,8 @@ static const unsigned armv8_pmuv3_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] /* * PMXEVTYPER: Event selection reg */ -#define ARMV8_EVTYPE_MASK 0xc80000ff /* Mask for writable bits */ -#define ARMV8_EVTYPE_EVENT 0xff /* Mask for EVENT bits */ +#define ARMV8_EVTYPE_MASK 0xc80003ff /* Mask for writable bits */ +#define ARMV8_EVTYPE_EVENT 0x3ff /* Mask for EVENT bits */ /* * Event filters for PMUv3 @@ -1175,7 +1175,8 @@ static void armv8pmu_reset(void *info) static int armv8_pmuv3_map_event(struct perf_event *event) { return map_cpu_event(event, &armv8_pmuv3_perf_map, - &armv8_pmuv3_perf_cache_map, 0xFF); + &armv8_pmuv3_perf_cache_map, + ARMV8_EVTYPE_EVENT); } static struct arm_pmu armv8pmu = { diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c index 7ae8a1f00c3..de17c89985d 100644 --- a/arch/arm64/kernel/process.c +++ b/arch/arm64/kernel/process.c @@ -102,6 +102,13 @@ void arch_cpu_idle(void) local_irq_enable(); } +#ifdef CONFIG_HOTPLUG_CPU +void arch_cpu_idle_dead(void) +{ + cpu_die(); +} +#endif + void machine_shutdown(void) { #ifdef CONFIG_SMP diff --git a/arch/arm64/kernel/psci.c b/arch/arm64/kernel/psci.c index 14f73c445ff..4f97db3d736 100644 --- a/arch/arm64/kernel/psci.c +++ b/arch/arm64/kernel/psci.c @@ -17,12 +17,32 @@ #include <linux/init.h> #include <linux/of.h> +#include <linux/smp.h> #include <asm/compiler.h> +#include <asm/cpu_ops.h> #include <asm/errno.h> #include <asm/psci.h> +#include <asm/smp_plat.h> -struct psci_operations psci_ops; +#define PSCI_POWER_STATE_TYPE_STANDBY 0 +#define PSCI_POWER_STATE_TYPE_POWER_DOWN 1 + +struct psci_power_state { + u16 id; + u8 type; + u8 affinity_level; +}; + +struct psci_operations { + int (*cpu_suspend)(struct psci_power_state state, + unsigned long entry_point); + int (*cpu_off)(struct psci_power_state state); + int (*cpu_on)(unsigned long cpuid, unsigned long entry_point); + int (*migrate)(unsigned long cpuid); +}; + +static struct psci_operations psci_ops; static int (*invoke_psci_fn)(u64, u64, u64, u64); @@ -209,3 +229,68 @@ out_put_node: of_node_put(np); return err; } + +#ifdef CONFIG_SMP + +static int __init cpu_psci_cpu_init(struct device_node *dn, unsigned int cpu) +{ + return 0; +} + +static int __init cpu_psci_cpu_prepare(unsigned int cpu) +{ + if (!psci_ops.cpu_on) { + pr_err("no cpu_on method, not booting CPU%d\n", cpu); + return -ENODEV; + } + + return 0; +} + +static int cpu_psci_cpu_boot(unsigned int cpu) +{ + int err = psci_ops.cpu_on(cpu_logical_map(cpu), __pa(secondary_entry)); + if (err) + pr_err("psci: failed to boot CPU%d (%d)\n", cpu, err); + + return err; +} + +#ifdef CONFIG_HOTPLUG_CPU +static int cpu_psci_cpu_disable(unsigned int cpu) +{ + /* Fail early if we don't have CPU_OFF support */ + if (!psci_ops.cpu_off) + return -EOPNOTSUPP; + return 0; +} + +static void cpu_psci_cpu_die(unsigned int cpu) +{ + int ret; + /* + * There are no known implementations of PSCI actually using the + * power state field, pass a sensible default for now. + */ + struct psci_power_state state = { + .type = PSCI_POWER_STATE_TYPE_POWER_DOWN, + }; + + ret = psci_ops.cpu_off(state); + + pr_crit("psci: unable to power off CPU%u (%d)\n", cpu, ret); +} +#endif + +const struct cpu_operations cpu_psci_ops = { + .name = "psci", + .cpu_init = cpu_psci_cpu_init, + .cpu_prepare = cpu_psci_cpu_prepare, + .cpu_boot = cpu_psci_cpu_boot, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_disable = cpu_psci_cpu_disable, + .cpu_die = cpu_psci_cpu_die, +#endif +}; + +#endif diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c index 055cfb80e05..9cf30f49610 100644 --- a/arch/arm64/kernel/setup.c +++ b/arch/arm64/kernel/setup.c @@ -45,6 +45,7 @@ #include <asm/cputype.h> #include <asm/elf.h> #include <asm/cputable.h> +#include <asm/cpu_ops.h> #include <asm/sections.h> #include <asm/setup.h> #include <asm/smp_plat.h> @@ -97,6 +98,11 @@ void __init early_print(const char *str, ...) printk("%s", buf); } +bool arch_match_cpu_phys_id(int cpu, u64 phys_id) +{ + return phys_id == cpu_logical_map(cpu); +} + static void __init setup_processor(void) { struct cpu_info *cpu_info; @@ -118,7 +124,7 @@ static void __init setup_processor(void) printk("CPU: %s [%08x] revision %d\n", cpu_name, read_cpuid_id(), read_cpuid_id() & 15); - sprintf(init_utsname()->machine, "aarch64"); + sprintf(init_utsname()->machine, ELF_PLATFORM); elf_hwcap = 0; } @@ -264,6 +270,7 @@ void __init setup_arch(char **cmdline_p) psci_init(); cpu_logical_map(0) = read_cpuid_mpidr() & MPIDR_HWID_BITMASK; + cpu_read_bootcpu_ops(); #ifdef CONFIG_SMP smp_init_cpus(); #endif diff --git a/arch/arm64/kernel/signal32.c b/arch/arm64/kernel/signal32.c index e393174fe85..e51bbe79f5b 100644 --- a/arch/arm64/kernel/signal32.c +++ b/arch/arm64/kernel/signal32.c @@ -100,34 +100,6 @@ struct compat_rt_sigframe { #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) -/* - * For ARM syscalls, the syscall number has to be loaded into r7. - * We do not support an OABI userspace. - */ -#define MOV_R7_NR_SIGRETURN (0xe3a07000 | __NR_compat_sigreturn) -#define SVC_SYS_SIGRETURN (0xef000000 | __NR_compat_sigreturn) -#define MOV_R7_NR_RT_SIGRETURN (0xe3a07000 | __NR_compat_rt_sigreturn) -#define SVC_SYS_RT_SIGRETURN (0xef000000 | __NR_compat_rt_sigreturn) - -/* - * For Thumb syscalls, we also pass the syscall number via r7. We therefore - * need two 16-bit instructions. - */ -#define SVC_THUMB_SIGRETURN (((0xdf00 | __NR_compat_sigreturn) << 16) | \ - 0x2700 | __NR_compat_sigreturn) -#define SVC_THUMB_RT_SIGRETURN (((0xdf00 | __NR_compat_rt_sigreturn) << 16) | \ - 0x2700 | __NR_compat_rt_sigreturn) - -const compat_ulong_t aarch32_sigret_code[6] = { - /* - * AArch32 sigreturn code. - * We don't construct an OABI SWI - instead we just set the imm24 field - * to the EABI syscall number so that we create a sane disassembly. - */ - MOV_R7_NR_SIGRETURN, SVC_SYS_SIGRETURN, SVC_THUMB_SIGRETURN, - MOV_R7_NR_RT_SIGRETURN, SVC_SYS_RT_SIGRETURN, SVC_THUMB_RT_SIGRETURN, -}; - static inline int put_sigset_t(compat_sigset_t __user *uset, sigset_t *set) { compat_sigset_t cset; @@ -474,12 +446,13 @@ static void compat_setup_return(struct pt_regs *regs, struct k_sigaction *ka, /* Check if the handler is written for ARM or Thumb */ thumb = handler & 1; - if (thumb) { + if (thumb) spsr |= COMPAT_PSR_T_BIT; - spsr &= ~COMPAT_PSR_IT_MASK; - } else { + else spsr &= ~COMPAT_PSR_T_BIT; - } + + /* The IT state must be cleared for both ARM and Thumb-2 */ + spsr &= ~COMPAT_PSR_IT_MASK; if (ka->sa.sa_flags & SA_RESTORER) { retcode = ptr_to_compat(ka->sa.sa_restorer); diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c index 78db90dcc91..a5aeefab03c 100644 --- a/arch/arm64/kernel/smp.c +++ b/arch/arm64/kernel/smp.c @@ -39,6 +39,7 @@ #include <asm/atomic.h> #include <asm/cacheflush.h> #include <asm/cputype.h> +#include <asm/cpu_ops.h> #include <asm/mmu_context.h> #include <asm/pgtable.h> #include <asm/pgalloc.h> @@ -54,7 +55,6 @@ * where to place its SVC stack */ struct secondary_data secondary_data; -volatile unsigned long secondary_holding_pen_release = INVALID_HWID; enum ipi_msg_type { IPI_RESCHEDULE, @@ -63,61 +63,16 @@ enum ipi_msg_type { IPI_CPU_STOP, }; -static DEFINE_RAW_SPINLOCK(boot_lock); - -/* - * Write secondary_holding_pen_release in a way that is guaranteed to be - * visible to all observers, irrespective of whether they're taking part - * in coherency or not. This is necessary for the hotplug code to work - * reliably. - */ -static void write_pen_release(u64 val) -{ - void *start = (void *)&secondary_holding_pen_release; - unsigned long size = sizeof(secondary_holding_pen_release); - - secondary_holding_pen_release = val; - __flush_dcache_area(start, size); -} - /* * Boot a secondary CPU, and assign it the specified idle task. * This also gives us the initial stack to use for this CPU. */ static int boot_secondary(unsigned int cpu, struct task_struct *idle) { - unsigned long timeout; - - /* - * Set synchronisation state between this boot processor - * and the secondary one - */ - raw_spin_lock(&boot_lock); - - /* - * Update the pen release flag. - */ - write_pen_release(cpu_logical_map(cpu)); - - /* - * Send an event, causing the secondaries to read pen_release. - */ - sev(); - - timeout = jiffies + (1 * HZ); - while (time_before(jiffies, timeout)) { - if (secondary_holding_pen_release == INVALID_HWID) - break; - udelay(10); - } - - /* - * Now the secondary core is starting up let it run its - * calibrations, then wait for it to finish - */ - raw_spin_unlock(&boot_lock); + if (cpu_ops[cpu]->cpu_boot) + return cpu_ops[cpu]->cpu_boot(cpu); - return secondary_holding_pen_release != INVALID_HWID ? -ENOSYS : 0; + return -EOPNOTSUPP; } static DECLARE_COMPLETION(cpu_running); @@ -187,17 +142,13 @@ asmlinkage void secondary_start_kernel(void) preempt_disable(); trace_hardirqs_off(); - /* - * Let the primary processor know we're out of the - * pen, then head off into the C entry point - */ - write_pen_release(INVALID_HWID); + if (cpu_ops[cpu]->cpu_postboot) + cpu_ops[cpu]->cpu_postboot(); /* - * Synchronise with the boot thread. + * Enable GIC and timers. */ - raw_spin_lock(&boot_lock); - raw_spin_unlock(&boot_lock); + notify_cpu_starting(cpu); /* * OK, now it's safe to let the boot CPU continue. Wait for @@ -207,11 +158,6 @@ asmlinkage void secondary_start_kernel(void) set_cpu_online(cpu, true); complete(&cpu_running); - /* - * Enable GIC and timers. - */ - notify_cpu_starting(cpu); - local_irq_enable(); local_fiq_enable(); @@ -221,39 +167,113 @@ asmlinkage void secondary_start_kernel(void) cpu_startup_entry(CPUHP_ONLINE); } -void __init smp_cpus_done(unsigned int max_cpus) +#ifdef CONFIG_HOTPLUG_CPU +static int op_cpu_disable(unsigned int cpu) { - pr_info("SMP: Total of %d processors activated.\n", num_online_cpus()); + /* + * If we don't have a cpu_die method, abort before we reach the point + * of no return. CPU0 may not have an cpu_ops, so test for it. + */ + if (!cpu_ops[cpu] || !cpu_ops[cpu]->cpu_die) + return -EOPNOTSUPP; + + /* + * We may need to abort a hot unplug for some other mechanism-specific + * reason. + */ + if (cpu_ops[cpu]->cpu_disable) + return cpu_ops[cpu]->cpu_disable(cpu); + + return 0; } -void __init smp_prepare_boot_cpu(void) +/* + * __cpu_disable runs on the processor to be shutdown. + */ +int __cpu_disable(void) { -} + unsigned int cpu = smp_processor_id(); + int ret; -static void (*smp_cross_call)(const struct cpumask *, unsigned int); + ret = op_cpu_disable(cpu); + if (ret) + return ret; -static const struct smp_enable_ops *enable_ops[] __initconst = { - &smp_spin_table_ops, - &smp_psci_ops, - NULL, -}; + /* + * Take this CPU offline. Once we clear this, we can't return, + * and we must not schedule until we're ready to give up the cpu. + */ + set_cpu_online(cpu, false); + + /* + * OK - migrate IRQs away from this CPU + */ + migrate_irqs(); -static const struct smp_enable_ops *smp_enable_ops[NR_CPUS]; + /* + * Remove this CPU from the vm mask set of all processes. + */ + clear_tasks_mm_cpumask(cpu); -static const struct smp_enable_ops * __init smp_get_enable_ops(const char *name) -{ - const struct smp_enable_ops **ops = enable_ops; + return 0; +} - while (*ops) { - if (!strcmp(name, (*ops)->name)) - return *ops; +static DECLARE_COMPLETION(cpu_died); - ops++; +/* + * called on the thread which is asking for a CPU to be shutdown - + * waits until shutdown has completed, or it is timed out. + */ +void __cpu_die(unsigned int cpu) +{ + if (!wait_for_completion_timeout(&cpu_died, msecs_to_jiffies(5000))) { + pr_crit("CPU%u: cpu didn't die\n", cpu); + return; } + pr_notice("CPU%u: shutdown\n", cpu); +} + +/* + * Called from the idle thread for the CPU which has been shutdown. + * + * Note that we disable IRQs here, but do not re-enable them + * before returning to the caller. This is also the behaviour + * of the other hotplug-cpu capable cores, so presumably coming + * out of idle fixes this. + */ +void cpu_die(void) +{ + unsigned int cpu = smp_processor_id(); + + idle_task_exit(); - return NULL; + local_irq_disable(); + + /* Tell __cpu_die() that this CPU is now safe to dispose of */ + complete(&cpu_died); + + /* + * Actually shutdown the CPU. This must never fail. The specific hotplug + * mechanism must perform all required cache maintenance to ensure that + * no dirty lines are lost in the process of shutting down the CPU. + */ + cpu_ops[cpu]->cpu_die(cpu); + + BUG(); +} +#endif + +void __init smp_cpus_done(unsigned int max_cpus) +{ + pr_info("SMP: Total of %d processors activated.\n", num_online_cpus()); } +void __init smp_prepare_boot_cpu(void) +{ +} + +static void (*smp_cross_call)(const struct cpumask *, unsigned int); + /* * Enumerate the possible CPU set from the device tree and build the * cpu logical map array containing MPIDR values related to logical @@ -261,9 +281,8 @@ static const struct smp_enable_ops * __init smp_get_enable_ops(const char *name) */ void __init smp_init_cpus(void) { - const char *enable_method; struct device_node *dn = NULL; - int i, cpu = 1; + unsigned int i, cpu = 1; bool bootcpu_valid = false; while ((dn = of_find_node_by_type(dn, "cpu"))) { @@ -332,25 +351,10 @@ void __init smp_init_cpus(void) if (cpu >= NR_CPUS) goto next; - /* - * We currently support only the "spin-table" enable-method. - */ - enable_method = of_get_property(dn, "enable-method", NULL); - if (!enable_method) { - pr_err("%s: missing enable-method property\n", - dn->full_name); + if (cpu_read_ops(dn, cpu) != 0) goto next; - } - - smp_enable_ops[cpu] = smp_get_enable_ops(enable_method); - - if (!smp_enable_ops[cpu]) { - pr_err("%s: invalid enable-method property: %s\n", - dn->full_name, enable_method); - goto next; - } - if (smp_enable_ops[cpu]->init_cpu(dn, cpu)) + if (cpu_ops[cpu]->cpu_init(dn, cpu)) goto next; pr_debug("cpu logical map 0x%llx\n", hwid); @@ -380,8 +384,8 @@ next: void __init smp_prepare_cpus(unsigned int max_cpus) { - int cpu, err; - unsigned int ncores = num_possible_cpus(); + int err; + unsigned int cpu, ncores = num_possible_cpus(); /* * are we trying to boot more cores than exist? @@ -408,10 +412,10 @@ void __init smp_prepare_cpus(unsigned int max_cpus) if (cpu == smp_processor_id()) continue; - if (!smp_enable_ops[cpu]) + if (!cpu_ops[cpu]) continue; - err = smp_enable_ops[cpu]->prepare_cpu(cpu); + err = cpu_ops[cpu]->cpu_prepare(cpu); if (err) continue; @@ -451,7 +455,7 @@ void show_ipi_list(struct seq_file *p, int prec) for (i = 0; i < NR_IPI; i++) { seq_printf(p, "%*s%u:%s", prec - 1, "IPI", i + IPI_RESCHEDULE, prec >= 4 ? " " : ""); - for_each_present_cpu(cpu) + for_each_online_cpu(cpu) seq_printf(p, "%10u ", __get_irq_stat(cpu, ipi_irqs[i])); seq_printf(p, " %s\n", ipi_types[i]); diff --git a/arch/arm64/kernel/smp_psci.c b/arch/arm64/kernel/smp_psci.c deleted file mode 100644 index 0c533301be7..00000000000 --- a/arch/arm64/kernel/smp_psci.c +++ /dev/null @@ -1,53 +0,0 @@ -/* - * PSCI SMP initialisation - * - * Copyright (C) 2013 ARM Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include <linux/init.h> -#include <linux/of.h> -#include <linux/smp.h> - -#include <asm/psci.h> -#include <asm/smp_plat.h> - -static int __init smp_psci_init_cpu(struct device_node *dn, int cpu) -{ - return 0; -} - -static int __init smp_psci_prepare_cpu(int cpu) -{ - int err; - - if (!psci_ops.cpu_on) { - pr_err("psci: no cpu_on method, not booting CPU%d\n", cpu); - return -ENODEV; - } - - err = psci_ops.cpu_on(cpu_logical_map(cpu), __pa(secondary_holding_pen)); - if (err) { - pr_err("psci: failed to boot CPU%d (%d)\n", cpu, err); - return err; - } - - return 0; -} - -const struct smp_enable_ops smp_psci_ops __initconst = { - .name = "psci", - .init_cpu = smp_psci_init_cpu, - .prepare_cpu = smp_psci_prepare_cpu, -}; diff --git a/arch/arm64/kernel/smp_spin_table.c b/arch/arm64/kernel/smp_spin_table.c index 7c35fa682f7..44c22805d2e 100644 --- a/arch/arm64/kernel/smp_spin_table.c +++ b/arch/arm64/kernel/smp_spin_table.c @@ -16,15 +16,39 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ +#include <linux/delay.h> #include <linux/init.h> #include <linux/of.h> #include <linux/smp.h> #include <asm/cacheflush.h> +#include <asm/cpu_ops.h> +#include <asm/cputype.h> +#include <asm/smp_plat.h> + +extern void secondary_holding_pen(void); +volatile unsigned long secondary_holding_pen_release = INVALID_HWID; static phys_addr_t cpu_release_addr[NR_CPUS]; +static DEFINE_RAW_SPINLOCK(boot_lock); + +/* + * Write secondary_holding_pen_release in a way that is guaranteed to be + * visible to all observers, irrespective of whether they're taking part + * in coherency or not. This is necessary for the hotplug code to work + * reliably. + */ +static void write_pen_release(u64 val) +{ + void *start = (void *)&secondary_holding_pen_release; + unsigned long size = sizeof(secondary_holding_pen_release); -static int __init smp_spin_table_init_cpu(struct device_node *dn, int cpu) + secondary_holding_pen_release = val; + __flush_dcache_area(start, size); +} + + +static int smp_spin_table_cpu_init(struct device_node *dn, unsigned int cpu) { /* * Determine the address from which the CPU is polling. @@ -40,7 +64,7 @@ static int __init smp_spin_table_init_cpu(struct device_node *dn, int cpu) return 0; } -static int __init smp_spin_table_prepare_cpu(int cpu) +static int smp_spin_table_cpu_prepare(unsigned int cpu) { void **release_addr; @@ -48,7 +72,16 @@ static int __init smp_spin_table_prepare_cpu(int cpu) return -ENODEV; release_addr = __va(cpu_release_addr[cpu]); - release_addr[0] = (void *)__pa(secondary_holding_pen); + + /* + * We write the release address as LE regardless of the native + * endianess of the kernel. Therefore, any boot-loaders that + * read this address need to convert this address to the + * boot-loader's endianess before jumping. This is mandated by + * the boot protocol. + */ + release_addr[0] = (void *) cpu_to_le64(__pa(secondary_holding_pen)); + __flush_dcache_area(release_addr, sizeof(release_addr[0])); /* @@ -59,8 +92,60 @@ static int __init smp_spin_table_prepare_cpu(int cpu) return 0; } -const struct smp_enable_ops smp_spin_table_ops __initconst = { +static int smp_spin_table_cpu_boot(unsigned int cpu) +{ + unsigned long timeout; + + /* + * Set synchronisation state between this boot processor + * and the secondary one + */ + raw_spin_lock(&boot_lock); + + /* + * Update the pen release flag. + */ + write_pen_release(cpu_logical_map(cpu)); + + /* + * Send an event, causing the secondaries to read pen_release. + */ + sev(); + + timeout = jiffies + (1 * HZ); + while (time_before(jiffies, timeout)) { + if (secondary_holding_pen_release == INVALID_HWID) + break; + udelay(10); + } + + /* + * Now the secondary core is starting up let it run its + * calibrations, then wait for it to finish + */ + raw_spin_unlock(&boot_lock); + + return secondary_holding_pen_release != INVALID_HWID ? -ENOSYS : 0; +} + +void smp_spin_table_cpu_postboot(void) +{ + /* + * Let the primary processor know we're out of the pen. + */ + write_pen_release(INVALID_HWID); + + /* + * Synchronise with the boot thread. + */ + raw_spin_lock(&boot_lock); + raw_spin_unlock(&boot_lock); +} + +const struct cpu_operations smp_spin_table_ops = { .name = "spin-table", - .init_cpu = smp_spin_table_init_cpu, - .prepare_cpu = smp_spin_table_prepare_cpu, + .cpu_init = smp_spin_table_cpu_init, + .cpu_prepare = smp_spin_table_cpu_prepare, + .cpu_boot = smp_spin_table_cpu_boot, + .cpu_postboot = smp_spin_table_cpu_postboot, }; diff --git a/arch/arm64/kernel/sys32.S b/arch/arm64/kernel/sys32.S index a1b19ed7467..423a5b3fc2b 100644 --- a/arch/arm64/kernel/sys32.S +++ b/arch/arm64/kernel/sys32.S @@ -59,48 +59,48 @@ ENDPROC(compat_sys_fstatfs64_wrapper) * extension. */ compat_sys_pread64_wrapper: - orr x3, x4, x5, lsl #32 + regs_to_64 x3, x4, x5 b sys_pread64 ENDPROC(compat_sys_pread64_wrapper) compat_sys_pwrite64_wrapper: - orr x3, x4, x5, lsl #32 + regs_to_64 x3, x4, x5 b sys_pwrite64 ENDPROC(compat_sys_pwrite64_wrapper) compat_sys_truncate64_wrapper: - orr x1, x2, x3, lsl #32 + regs_to_64 x1, x2, x3 b sys_truncate ENDPROC(compat_sys_truncate64_wrapper) compat_sys_ftruncate64_wrapper: - orr x1, x2, x3, lsl #32 + regs_to_64 x1, x2, x3 b sys_ftruncate ENDPROC(compat_sys_ftruncate64_wrapper) compat_sys_readahead_wrapper: - orr x1, x2, x3, lsl #32 + regs_to_64 x1, x2, x3 mov w2, w4 b sys_readahead ENDPROC(compat_sys_readahead_wrapper) compat_sys_fadvise64_64_wrapper: mov w6, w1 - orr x1, x2, x3, lsl #32 - orr x2, x4, x5, lsl #32 + regs_to_64 x1, x2, x3 + regs_to_64 x2, x4, x5 mov w3, w6 b sys_fadvise64_64 ENDPROC(compat_sys_fadvise64_64_wrapper) compat_sys_sync_file_range2_wrapper: - orr x2, x2, x3, lsl #32 - orr x3, x4, x5, lsl #32 + regs_to_64 x2, x2, x3 + regs_to_64 x3, x4, x5 b sys_sync_file_range2 ENDPROC(compat_sys_sync_file_range2_wrapper) compat_sys_fallocate_wrapper: - orr x2, x2, x3, lsl #32 - orr x3, x4, x5, lsl #32 + regs_to_64 x2, x2, x3 + regs_to_64 x3, x4, x5 b sys_fallocate ENDPROC(compat_sys_fallocate_wrapper) diff --git a/arch/arm64/kernel/vdso.c b/arch/arm64/kernel/vdso.c index 6a389dc1bd4..65d40cf6945 100644 --- a/arch/arm64/kernel/vdso.c +++ b/arch/arm64/kernel/vdso.c @@ -58,7 +58,10 @@ static struct page *vectors_page[1]; static int alloc_vectors_page(void) { extern char __kuser_helper_start[], __kuser_helper_end[]; + extern char __aarch32_sigret_code_start[], __aarch32_sigret_code_end[]; + int kuser_sz = __kuser_helper_end - __kuser_helper_start; + int sigret_sz = __aarch32_sigret_code_end - __aarch32_sigret_code_start; unsigned long vpage; vpage = get_zeroed_page(GFP_ATOMIC); @@ -72,7 +75,7 @@ static int alloc_vectors_page(void) /* sigreturn code */ memcpy((void *)vpage + AARCH32_KERN_SIGRET_CODE_OFFSET, - aarch32_sigret_code, sizeof(aarch32_sigret_code)); + __aarch32_sigret_code_start, sigret_sz); flush_icache_range(vpage, vpage + PAGE_SIZE); vectors_page[0] = virt_to_page(vpage); diff --git a/arch/arm64/kernel/vmlinux.lds.S b/arch/arm64/kernel/vmlinux.lds.S index f8ab9d8e2ea..5161ad99209 100644 --- a/arch/arm64/kernel/vmlinux.lds.S +++ b/arch/arm64/kernel/vmlinux.lds.S @@ -54,7 +54,6 @@ SECTIONS } .text : { /* Real text segment */ _stext = .; /* Text and read-only data */ - *(.smp.pen.text) __exception_text_start = .; *(.exception.text) __exception_text_end = .; @@ -97,30 +96,13 @@ SECTIONS PERCPU_SECTION(64) __init_end = .; - . = ALIGN(THREAD_SIZE); - __data_loc = .; - - .data : AT(__data_loc) { - _data = .; /* address in memory */ - _sdata = .; - - /* - * first, the init task union, aligned - * to an 8192 byte boundary. - */ - INIT_TASK_DATA(THREAD_SIZE) - NOSAVE_DATA - CACHELINE_ALIGNED_DATA(64) - READ_MOSTLY_DATA(64) - - /* - * and the usual data section - */ - DATA_DATA - CONSTRUCTORS - - _edata = .; - } + + . = ALIGN(PAGE_SIZE); + _data = .; + __data_loc = _data - LOAD_OFFSET; + _sdata = .; + RW_DATA_SECTION(64, PAGE_SIZE, THREAD_SIZE) + _edata = .; _edata_loc = __data_loc + SIZEOF(.data); BSS_SECTION(0, 0, 0) diff --git a/arch/arm64/kvm/hyp-init.S b/arch/arm64/kvm/hyp-init.S index ba84e6705e2..2b0244d65c1 100644 --- a/arch/arm64/kvm/hyp-init.S +++ b/arch/arm64/kvm/hyp-init.S @@ -74,7 +74,10 @@ __do_hyp_init: msr mair_el2, x4 isb - mov x4, #SCTLR_EL2_FLAGS + mrs x4, sctlr_el2 + and x4, x4, #SCTLR_EL2_EE // preserve endianness of EL2 + ldr x5, =SCTLR_EL2_FLAGS + orr x4, x4, x5 msr sctlr_el2, x4 isb diff --git a/arch/arm64/kvm/hyp.S b/arch/arm64/kvm/hyp.S index 1ac0bbbdddb..3b47c36e10f 100644 --- a/arch/arm64/kvm/hyp.S +++ b/arch/arm64/kvm/hyp.S @@ -403,6 +403,14 @@ __kvm_hyp_code_start: ldr w9, [x2, #GICH_ELRSR0] ldr w10, [x2, #GICH_ELRSR1] ldr w11, [x2, #GICH_APR] +CPU_BE( rev w4, w4 ) +CPU_BE( rev w5, w5 ) +CPU_BE( rev w6, w6 ) +CPU_BE( rev w7, w7 ) +CPU_BE( rev w8, w8 ) +CPU_BE( rev w9, w9 ) +CPU_BE( rev w10, w10 ) +CPU_BE( rev w11, w11 ) str w4, [x3, #VGIC_CPU_HCR] str w5, [x3, #VGIC_CPU_VMCR] @@ -421,6 +429,7 @@ __kvm_hyp_code_start: ldr w4, [x3, #VGIC_CPU_NR_LR] add x3, x3, #VGIC_CPU_LR 1: ldr w5, [x2], #4 +CPU_BE( rev w5, w5 ) str w5, [x3], #4 sub w4, w4, #1 cbnz w4, 1b @@ -446,6 +455,9 @@ __kvm_hyp_code_start: ldr w4, [x3, #VGIC_CPU_HCR] ldr w5, [x3, #VGIC_CPU_VMCR] ldr w6, [x3, #VGIC_CPU_APR] +CPU_BE( rev w4, w4 ) +CPU_BE( rev w5, w5 ) +CPU_BE( rev w6, w6 ) str w4, [x2, #GICH_HCR] str w5, [x2, #GICH_VMCR] @@ -456,6 +468,7 @@ __kvm_hyp_code_start: ldr w4, [x3, #VGIC_CPU_NR_LR] add x3, x3, #VGIC_CPU_LR 1: ldr w5, [x3], #4 +CPU_BE( rev w5, w5 ) str w5, [x2], #4 sub w4, w4, #1 cbnz w4, 1b diff --git a/arch/arm64/mm/ioremap.c b/arch/arm64/mm/ioremap.c index 1725cd6db37..2bb1d586664 100644 --- a/arch/arm64/mm/ioremap.c +++ b/arch/arm64/mm/ioremap.c @@ -77,8 +77,24 @@ EXPORT_SYMBOL(__ioremap); void __iounmap(volatile void __iomem *io_addr) { - void *addr = (void *)(PAGE_MASK & (unsigned long)io_addr); + unsigned long addr = (unsigned long)io_addr & PAGE_MASK; - vunmap(addr); + /* + * We could get an address outside vmalloc range in case + * of ioremap_cache() reusing a RAM mapping. + */ + if (VMALLOC_START <= addr && addr < VMALLOC_END) + vunmap((void *)addr); } EXPORT_SYMBOL(__iounmap); + +void __iomem *ioremap_cache(phys_addr_t phys_addr, size_t size) +{ + /* For normal memory we already have a cacheable mapping. */ + if (pfn_valid(__phys_to_pfn(phys_addr))) + return (void __iomem *)__phys_to_virt(phys_addr); + + return __ioremap_caller(phys_addr, size, __pgprot(PROT_NORMAL), + __builtin_return_address(0)); +} +EXPORT_SYMBOL(ioremap_cache); diff --git a/arch/arm64/mm/proc.S b/arch/arm64/mm/proc.S index b1b31bbc967..421b99fd635 100644 --- a/arch/arm64/mm/proc.S +++ b/arch/arm64/mm/proc.S @@ -162,9 +162,9 @@ ENDPROC(__cpu_setup) * CE0 XWHW CZ ME TEEA S * .... .IEE .... NEAI TE.I ..AD DEN0 ACAM * 0011 0... 1101 ..0. ..0. 10.. .... .... < hardware reserved - * .... .100 .... 01.1 11.1 ..01 0001 1101 < software settings + * .... .1.. .... 01.1 11.1 ..01 0001 1101 < software settings */ .type crval, #object crval: - .word 0x030802e2 // clear + .word 0x000802e2 // clear .word 0x0405d11d // set diff --git a/arch/m68k/include/asm/floppy.h b/arch/m68k/include/asm/floppy.h index 697d50393dd..47365b1ccbe 100644 --- a/arch/m68k/include/asm/floppy.h +++ b/arch/m68k/include/asm/floppy.h @@ -85,7 +85,7 @@ static int fd_request_irq(void) { if(MACH_IS_Q40) return request_irq(FLOPPY_IRQ, floppy_hardint, - IRQF_DISABLED, "floppy", floppy_hardint); + 0, "floppy", floppy_hardint); else if(MACH_IS_SUN3X) return sun3xflop_request_irq(); return -ENXIO; diff --git a/arch/m68k/include/asm/sun3xflop.h b/arch/m68k/include/asm/sun3xflop.h index 95231e2f9d6..a02ea3a7bb2 100644 --- a/arch/m68k/include/asm/sun3xflop.h +++ b/arch/m68k/include/asm/sun3xflop.h @@ -207,7 +207,7 @@ static int sun3xflop_request_irq(void) if(!once) { once = 1; error = request_irq(FLOPPY_IRQ, sun3xflop_hardint, - IRQF_DISABLED, "floppy", NULL); + 0, "floppy", NULL); return ((error == 0) ? 0 : -1); } else return 0; } diff --git a/arch/m68k/include/asm/uaccess.h b/arch/m68k/include/asm/uaccess.h index 639c731568b..3fadc4a93d9 100644 --- a/arch/m68k/include/asm/uaccess.h +++ b/arch/m68k/include/asm/uaccess.h @@ -3,3 +3,10 @@ #else #include <asm/uaccess_mm.h> #endif + +#ifdef CONFIG_CPU_HAS_NO_UNALIGNED +#include <asm-generic/uaccess-unaligned.h> +#else +#define __get_user_unaligned(x, ptr) __get_user((x), (ptr)) +#define __put_user_unaligned(x, ptr) __put_user((x), (ptr)) +#endif diff --git a/arch/m68k/platform/68000/timers.c b/arch/m68k/platform/68000/timers.c index ec30acbfe6d..99a98698bc9 100644 --- a/arch/m68k/platform/68000/timers.c +++ b/arch/m68k/platform/68000/timers.c @@ -70,7 +70,7 @@ static irqreturn_t hw_tick(int irq, void *dummy) static struct irqaction m68328_timer_irq = { .name = "timer", - .flags = IRQF_DISABLED | IRQF_TIMER, + .flags = IRQF_TIMER, .handler = hw_tick, }; diff --git a/arch/m68k/platform/68360/config.c b/arch/m68k/platform/68360/config.c index 0570741e550..d493ac43fe3 100644 --- a/arch/m68k/platform/68360/config.c +++ b/arch/m68k/platform/68360/config.c @@ -59,7 +59,7 @@ static irqreturn_t hw_tick(int irq, void *dummy) static struct irqaction m68360_timer_irq = { .name = "timer", - .flags = IRQF_DISABLED | IRQF_TIMER, + .flags = IRQF_TIMER, .handler = hw_tick, }; diff --git a/arch/m68k/platform/coldfire/pit.c b/arch/m68k/platform/coldfire/pit.c index e8f3b97b0f7..493b3111d4c 100644 --- a/arch/m68k/platform/coldfire/pit.c +++ b/arch/m68k/platform/coldfire/pit.c @@ -118,7 +118,7 @@ static irqreturn_t pit_tick(int irq, void *dummy) static struct irqaction pit_irq = { .name = "timer", - .flags = IRQF_DISABLED | IRQF_TIMER, + .flags = IRQF_TIMER, .handler = pit_tick, }; diff --git a/arch/m68k/platform/coldfire/sltimers.c b/arch/m68k/platform/coldfire/sltimers.c index bb5a25ada84..831a08cf6f4 100644 --- a/arch/m68k/platform/coldfire/sltimers.c +++ b/arch/m68k/platform/coldfire/sltimers.c @@ -51,7 +51,7 @@ irqreturn_t mcfslt_profile_tick(int irq, void *dummy) static struct irqaction mcfslt_profile_irq = { .name = "profile timer", - .flags = IRQF_DISABLED | IRQF_TIMER, + .flags = IRQF_TIMER, .handler = mcfslt_profile_tick, }; @@ -93,7 +93,7 @@ static irqreturn_t mcfslt_tick(int irq, void *dummy) static struct irqaction mcfslt_timer_irq = { .name = "timer", - .flags = IRQF_DISABLED | IRQF_TIMER, + .flags = IRQF_TIMER, .handler = mcfslt_tick, }; diff --git a/arch/m68k/platform/coldfire/timers.c b/arch/m68k/platform/coldfire/timers.c index d06068e4576..cd496a20fcc 100644 --- a/arch/m68k/platform/coldfire/timers.c +++ b/arch/m68k/platform/coldfire/timers.c @@ -83,7 +83,7 @@ static irqreturn_t mcftmr_tick(int irq, void *dummy) static struct irqaction mcftmr_timer_irq = { .name = "timer", - .flags = IRQF_DISABLED | IRQF_TIMER, + .flags = IRQF_TIMER, .handler = mcftmr_tick, }; @@ -171,7 +171,7 @@ irqreturn_t coldfire_profile_tick(int irq, void *dummy) static struct irqaction coldfire_profile_irq = { .name = "profile timer", - .flags = IRQF_DISABLED | IRQF_TIMER, + .flags = IRQF_TIMER, .handler = coldfire_profile_tick, }; diff --git a/arch/mips/Kbuild.platforms b/arch/mips/Kbuild.platforms index d9d81c21925..6e239123d6f 100644 --- a/arch/mips/Kbuild.platforms +++ b/arch/mips/Kbuild.platforms @@ -20,7 +20,6 @@ platforms += mti-sead3 platforms += netlogic platforms += pmcs-msp71xx platforms += pnx833x -platforms += powertv platforms += ralink platforms += rb532 platforms += sgi-ip22 diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index f75ab4a2f24..17cc7ff8458 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -8,6 +8,7 @@ config MIPS select HAVE_PERF_EVENTS select PERF_USE_VMALLOC select HAVE_ARCH_KGDB + select HAVE_ARCH_TRACEHOOK select ARCH_HAVE_CUSTOM_GPIO_H select HAVE_FUNCTION_TRACER select HAVE_FUNCTION_TRACE_MCOUNT_TEST @@ -18,6 +19,7 @@ config MIPS select HAVE_KPROBES select HAVE_KRETPROBES select HAVE_DEBUG_KMEMLEAK + select HAVE_SYSCALL_TRACEPOINTS select ARCH_BINFMT_ELF_RANDOMIZE_PIE select HAVE_ARCH_TRANSPARENT_HUGEPAGE if CPU_SUPPORTS_HUGEPAGES && 64BIT select RTC_LIB if !MACH_LOONGSON @@ -146,6 +148,7 @@ config MIPS_COBALT select CSRC_R4K select CEVT_GT641XX select DMA_NONCOHERENT + select EARLY_PRINTK_8250 if EARLY_PRINTK select HW_HAS_PCI select I8253 select I8259 @@ -412,23 +415,6 @@ config PMC_MSP of integrated peripherals, interfaces and DSPs in addition to a variety of MIPS cores. -config POWERTV - bool "Cisco PowerTV" - select BOOT_ELF32 - select CEVT_R4K - select CPU_MIPSR2_IRQ_VI - select CPU_MIPSR2_IRQ_EI - select CSRC_POWERTV - select DMA_NONCOHERENT - select HW_HAS_PCI - select SYS_HAS_CPU_MIPS32_R2 - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_BIG_ENDIAN - select SYS_SUPPORTS_HIGHMEM - select USB_OHCI_LITTLE_ENDIAN - help - This enables support for the Cisco PowerTV Platform. - config RALINK bool "Ralink based machines" select CEVT_R4K @@ -811,7 +797,6 @@ source "arch/mips/jz4740/Kconfig" source "arch/mips/lantiq/Kconfig" source "arch/mips/lasat/Kconfig" source "arch/mips/pmcs-msp71xx/Kconfig" -source "arch/mips/powertv/Kconfig" source "arch/mips/ralink/Kconfig" source "arch/mips/sgi-ip27/Kconfig" source "arch/mips/sibyte/Kconfig" @@ -890,9 +875,6 @@ config CSRC_BCM1480 config CSRC_IOASIC bool -config CSRC_POWERTV - bool - config CSRC_R4K bool @@ -1489,8 +1471,10 @@ config SYS_SUPPORTS_ZBOOT bool select HAVE_KERNEL_GZIP select HAVE_KERNEL_BZIP2 + select HAVE_KERNEL_LZ4 select HAVE_KERNEL_LZMA select HAVE_KERNEL_LZO + select HAVE_KERNEL_XZ config SYS_SUPPORTS_ZBOOT_UART16550 bool @@ -1977,6 +1961,7 @@ config MIPS_VPE_APSP_API config MIPS_CMP bool "MIPS CMP framework support" depends on SYS_SUPPORTS_MIPS_CMP + select SMP select SYNC_R4K select SYS_SUPPORTS_SMP select SYS_SUPPORTS_SCHED_SMT if SMP diff --git a/arch/mips/Kconfig.debug b/arch/mips/Kconfig.debug index 37871f0de15..b147e7038ff 100644 --- a/arch/mips/Kconfig.debug +++ b/arch/mips/Kconfig.debug @@ -20,6 +20,14 @@ config EARLY_PRINTK doesn't cooperate with an X server. You should normally say N here, unless you want to debug such a crash. +config EARLY_PRINTK_8250 + bool "8250/16550 and compatible serial early printk driver" + depends on EARLY_PRINTK + default n + help + If you say Y here, it will be possible to use a 8250/16550 serial + port as the boot console. + config CMDLINE_BOOL bool "Built-in kernel command line" default n diff --git a/arch/mips/Makefile b/arch/mips/Makefile index ca8f8340d75..de300b99360 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -285,15 +285,19 @@ endif # Other need ECOFF, so we build a 32-bit ELF binary for them which we then # convert to ECOFF using elf2ecoff. # +quiet_cmd_32 = OBJCOPY $@ + cmd_32 = $(OBJCOPY) -O $(32bit-bfd) $(OBJCOPYFLAGS) $< $@ vmlinux.32: vmlinux - $(OBJCOPY) -O $(32bit-bfd) $(OBJCOPYFLAGS) $< $@ + $(call cmd,32) # # The 64-bit ELF tools are pretty broken so at this time we generate 64-bit # ELF files from 32-bit files by conversion. # +quiet_cmd_64 = OBJCOPY $@ + cmd_64 = $(OBJCOPY) -O $(64bit-bfd) $(OBJCOPYFLAGS) $< $@ vmlinux.64: vmlinux - $(OBJCOPY) -O $(64bit-bfd) $(OBJCOPYFLAGS) $< $@ + $(call cmd,64) all: $(all-y) @@ -302,10 +306,16 @@ $(boot-y): $(vmlinux-32) FORCE $(Q)$(MAKE) $(build)=arch/mips/boot VMLINUX=$(vmlinux-32) \ $(bootvars-y) arch/mips/boot/$@ +ifdef CONFIG_SYS_SUPPORTS_ZBOOT # boot/compressed $(bootz-y): $(vmlinux-32) FORCE $(Q)$(MAKE) $(build)=arch/mips/boot/compressed \ $(bootvars-y) 32bit-bfd=$(32bit-bfd) $@ +else +vmlinuz: FORCE + @echo ' CONFIG_SYS_SUPPORTS_ZBOOT is not enabled' + /bin/false +endif CLEAN_FILES += vmlinux.32 vmlinux.64 diff --git a/arch/mips/alchemy/devboards/db1235.c b/arch/mips/alchemy/devboards/db1235.c index c76a90f7866..bac19dc43d1 100644 --- a/arch/mips/alchemy/devboards/db1235.c +++ b/arch/mips/alchemy/devboards/db1235.c @@ -59,7 +59,7 @@ void __init board_setup(void) ret = -ENODEV; } if (ret) - panic("cannot initialize board support\n"); + panic("cannot initialize board support"); } int __init db1235_arch_init(void) diff --git a/arch/mips/ath79/dev-common.c b/arch/mips/ath79/dev-common.c index c3b04c929f2..516225d207e 100644 --- a/arch/mips/ath79/dev-common.c +++ b/arch/mips/ath79/dev-common.c @@ -20,7 +20,6 @@ #include <asm/mach-ath79/ath79.h> #include <asm/mach-ath79/ar71xx_regs.h> -#include <asm/mach-ath79/ar933x_uart_platform.h> #include "common.h" #include "dev-common.h" @@ -68,15 +67,11 @@ static struct resource ar933x_uart_resources[] = { }, }; -static struct ar933x_uart_platform_data ar933x_uart_data; static struct platform_device ar933x_uart_device = { .name = "ar933x-uart", .id = -1, .resource = ar933x_uart_resources, .num_resources = ARRAY_SIZE(ar933x_uart_resources), - .dev = { - .platform_data = &ar933x_uart_data, - }, }; void __init ath79_register_uart(void) @@ -93,7 +88,6 @@ void __init ath79_register_uart(void) ath79_uart_data[0].uartclk = uart_clk_rate; platform_device_register(&ath79_uart_device); } else if (soc_is_ar933x()) { - ar933x_uart_data.uartclk = uart_clk_rate; platform_device_register(&ar933x_uart_device); } else { BUG(); diff --git a/arch/mips/bcm47xx/Makefile b/arch/mips/bcm47xx/Makefile index f3bf6d5bfb9..c52daf9b05c 100644 --- a/arch/mips/bcm47xx/Makefile +++ b/arch/mips/bcm47xx/Makefile @@ -4,4 +4,5 @@ # obj-y += irq.o nvram.o prom.o serial.o setup.o time.o sprom.o +obj-y += board.o obj-$(CONFIG_BCM47XX_SSB) += wgt634u.o diff --git a/arch/mips/bcm47xx/board.c b/arch/mips/bcm47xx/board.c new file mode 100644 index 00000000000..f3f6bfe68a2 --- /dev/null +++ b/arch/mips/bcm47xx/board.c @@ -0,0 +1,309 @@ +#include <linux/export.h> +#include <linux/string.h> +#include <bcm47xx_board.h> +#include <bcm47xx_nvram.h> + +struct bcm47xx_board_type { + const enum bcm47xx_board board; + const char *name; +}; + +struct bcm47xx_board_type_list1 { + struct bcm47xx_board_type board; + const char *value1; +}; + +struct bcm47xx_board_type_list2 { + struct bcm47xx_board_type board; + const char *value1; + const char *value2; +}; + +struct bcm47xx_board_type_list3 { + struct bcm47xx_board_type board; + const char *value1; + const char *value2; + const char *value3; +}; + +struct bcm47xx_board_store { + enum bcm47xx_board board; + char name[BCM47XX_BOARD_MAX_NAME]; +}; + +/* model_name */ +static const +struct bcm47xx_board_type_list1 bcm47xx_board_list_model_name[] __initconst = { + {{BCM47XX_BOARD_DLINK_DIR130, "D-Link DIR-130"}, "DIR-130"}, + {{BCM47XX_BOARD_DLINK_DIR330, "D-Link DIR-330"}, "DIR-330"}, + { {0}, 0}, +}; + +/* model_no */ +static const +struct bcm47xx_board_type_list1 bcm47xx_board_list_model_no[] __initconst = { + {{BCM47XX_BOARD_ASUS_WL700GE, "Asus WL700"}, "WL700"}, + { {0}, 0}, +}; + +/* machine_name */ +static const +struct bcm47xx_board_type_list1 bcm47xx_board_list_machine_name[] __initconst = { + {{BCM47XX_BOARD_LINKSYS_WRTSL54GS, "Linksys WRTSL54GS"}, "WRTSL54GS"}, + { {0}, 0}, +}; + +/* hardware_version */ +static const +struct bcm47xx_board_type_list1 bcm47xx_board_list_hardware_version[] __initconst = { + {{BCM47XX_BOARD_ASUS_RTN16, "Asus RT-N16"}, "RT-N16-"}, + {{BCM47XX_BOARD_ASUS_WL320GE, "Asus WL320GE"}, "WL320G-"}, + {{BCM47XX_BOARD_ASUS_WL330GE, "Asus WL330GE"}, "WL330GE-"}, + {{BCM47XX_BOARD_ASUS_WL500GD, "Asus WL500GD"}, "WL500gd-"}, + {{BCM47XX_BOARD_ASUS_WL500GPV1, "Asus WL500GP V1"}, "WL500gp-"}, + {{BCM47XX_BOARD_ASUS_WL500GPV2, "Asus WL500GP V2"}, "WL500GPV2-"}, + {{BCM47XX_BOARD_ASUS_WL500W, "Asus WL500W"}, "WL500gW-"}, + {{BCM47XX_BOARD_ASUS_WL520GC, "Asus WL520GC"}, "WL520GC-"}, + {{BCM47XX_BOARD_ASUS_WL520GU, "Asus WL520GU"}, "WL520GU-"}, + {{BCM47XX_BOARD_BELKIN_F7D4301, "Belkin F7D4301"}, "F7D4301"}, + { {0}, 0}, +}; + +/* productid */ +static const +struct bcm47xx_board_type_list1 bcm47xx_board_list_productid[] __initconst = { + {{BCM47XX_BOARD_ASUS_RTAC66U, "Asus RT-AC66U"}, "RT-AC66U"}, + {{BCM47XX_BOARD_ASUS_RTN10, "Asus RT-N10"}, "RT-N10"}, + {{BCM47XX_BOARD_ASUS_RTN10D, "Asus RT-N10D"}, "RT-N10D"}, + {{BCM47XX_BOARD_ASUS_RTN10U, "Asus RT-N10U"}, "RT-N10U"}, + {{BCM47XX_BOARD_ASUS_RTN12, "Asus RT-N12"}, "RT-N12"}, + {{BCM47XX_BOARD_ASUS_RTN12B1, "Asus RT-N12B1"}, "RT-N12B1"}, + {{BCM47XX_BOARD_ASUS_RTN12C1, "Asus RT-N12C1"}, "RT-N12C1"}, + {{BCM47XX_BOARD_ASUS_RTN12D1, "Asus RT-N12D1"}, "RT-N12D1"}, + {{BCM47XX_BOARD_ASUS_RTN12HP, "Asus RT-N12HP"}, "RT-N12HP"}, + {{BCM47XX_BOARD_ASUS_RTN15U, "Asus RT-N15U"}, "RT-N15U"}, + {{BCM47XX_BOARD_ASUS_RTN16, "Asus RT-N16"}, "RT-N16"}, + {{BCM47XX_BOARD_ASUS_RTN53, "Asus RT-N53"}, "RT-N53"}, + {{BCM47XX_BOARD_ASUS_RTN66U, "Asus RT-N66U"}, "RT-N66U"}, + {{BCM47XX_BOARD_ASUS_WL300G, "Asus WL300G"}, "WL300g"}, + {{BCM47XX_BOARD_ASUS_WLHDD, "Asus WLHDD"}, "WLHDD"}, + { {0}, 0}, +}; + +/* ModelId */ +static const +struct bcm47xx_board_type_list1 bcm47xx_board_list_ModelId[] __initconst = { + {{BCM47XX_BOARD_DELL_TM2300, "Dell WX-5565"}, "WX-5565"}, + {{BCM47XX_BOARD_MOTOROLA_WE800G, "Motorola WE800G"}, "WE800G"}, + {{BCM47XX_BOARD_MOTOROLA_WR850GP, "Motorola WR850GP"}, "WR850GP"}, + {{BCM47XX_BOARD_MOTOROLA_WR850GV2V3, "Motorola WR850G"}, "WR850G"}, + { {0}, 0}, +}; + +/* melco_id or buf1falo_id */ +static const +struct bcm47xx_board_type_list1 bcm47xx_board_list_melco_id[] __initconst = { + {{BCM47XX_BOARD_BUFFALO_WBR2_G54, "Buffalo WBR2-G54"}, "29bb0332"}, + {{BCM47XX_BOARD_BUFFALO_WHR2_A54G54, "Buffalo WHR2-A54G54"}, "290441dd"}, + {{BCM47XX_BOARD_BUFFALO_WHR_G125, "Buffalo WHR-G125"}, "32093"}, + {{BCM47XX_BOARD_BUFFALO_WHR_G54S, "Buffalo WHR-G54S"}, "30182"}, + {{BCM47XX_BOARD_BUFFALO_WHR_HP_G54, "Buffalo WHR-HP-G54"}, "30189"}, + {{BCM47XX_BOARD_BUFFALO_WLA2_G54L, "Buffalo WLA2-G54L"}, "29129"}, + {{BCM47XX_BOARD_BUFFALO_WZR_G300N, "Buffalo WZR-G300N"}, "31120"}, + {{BCM47XX_BOARD_BUFFALO_WZR_RS_G54, "Buffalo WZR-RS-G54"}, "30083"}, + {{BCM47XX_BOARD_BUFFALO_WZR_RS_G54HP, "Buffalo WZR-RS-G54HP"}, "30103"}, + { {0}, 0}, +}; + +/* boot_hw_model, boot_hw_ver */ +static const +struct bcm47xx_board_type_list2 bcm47xx_board_list_boot_hw[] __initconst = { + /* like WRT160N v3.0 */ + {{BCM47XX_BOARD_CISCO_M10V1, "Cisco M10"}, "M10", "1.0"}, + /* like WRT310N v2.0 */ + {{BCM47XX_BOARD_CISCO_M20V1, "Cisco M20"}, "M20", "1.0"}, + {{BCM47XX_BOARD_LINKSYS_E900V1, "Linksys E900 V1"}, "E900", "1.0"}, + /* like WRT160N v3.0 */ + {{BCM47XX_BOARD_LINKSYS_E1000V1, "Linksys E1000 V1"}, "E100", "1.0"}, + {{BCM47XX_BOARD_LINKSYS_E1000V2, "Linksys E1000 V2"}, "E1000", "2.0"}, + {{BCM47XX_BOARD_LINKSYS_E1000V21, "Linksys E1000 V2.1"}, "E1000", "2.1"}, + {{BCM47XX_BOARD_LINKSYS_E1200V2, "Linksys E1200 V2"}, "E1200", "2.0"}, + {{BCM47XX_BOARD_LINKSYS_E2000V1, "Linksys E2000 V1"}, "Linksys E2000", "1.0"}, + /* like WRT610N v2.0 */ + {{BCM47XX_BOARD_LINKSYS_E3000V1, "Linksys E3000 V1"}, "E300", "1.0"}, + {{BCM47XX_BOARD_LINKSYS_E3200V1, "Linksys E3200 V1"}, "E3200", "1.0"}, + {{BCM47XX_BOARD_LINKSYS_E4200V1, "Linksys E4200 V1"}, "E4200", "1.0"}, + {{BCM47XX_BOARD_LINKSYS_WRT150NV11, "Linksys WRT150N V1.1"}, "WRT150N", "1.1"}, + {{BCM47XX_BOARD_LINKSYS_WRT150NV1, "Linksys WRT150N V1"}, "WRT150N", "1"}, + {{BCM47XX_BOARD_LINKSYS_WRT160NV1, "Linksys WRT160N V1"}, "WRT160N", "1.0"}, + {{BCM47XX_BOARD_LINKSYS_WRT160NV3, "Linksys WRT160N V3"}, "WRT160N", "3.0"}, + {{BCM47XX_BOARD_LINKSYS_WRT300NV11, "Linksys WRT300N V1.1"}, "WRT300N", "1.1"}, + {{BCM47XX_BOARD_LINKSYS_WRT310NV1, "Linksys WRT310N V1"}, "WRT310N", "1.0"}, + {{BCM47XX_BOARD_LINKSYS_WRT310NV2, "Linksys WRT310N V2"}, "WRT310N", "2.0"}, + {{BCM47XX_BOARD_LINKSYS_WRT54G3GV2, "Linksys WRT54G3GV2-VF"}, "WRT54G3GV2-VF", "1.0"}, + {{BCM47XX_BOARD_LINKSYS_WRT610NV1, "Linksys WRT610N V1"}, "WRT610N", "1.0"}, + {{BCM47XX_BOARD_LINKSYS_WRT610NV2, "Linksys WRT610N V2"}, "WRT610N", "2.0"}, + { {0}, 0}, +}; + +/* board_id */ +static const +struct bcm47xx_board_type_list1 bcm47xx_board_list_board_id[] __initconst = { + {{BCM47XX_BOARD_NETGEAR_WGR614V8, "Netgear WGR614 V8"}, "U12H072T00_NETGEAR"}, + {{BCM47XX_BOARD_NETGEAR_WGR614V9, "Netgear WGR614 V9"}, "U12H094T00_NETGEAR"}, + {{BCM47XX_BOARD_NETGEAR_WNDR3300, "Netgear WNDR3300"}, "U12H093T00_NETGEAR"}, + {{BCM47XX_BOARD_NETGEAR_WNDR3400V1, "Netgear WNDR3400 V1"}, "U12H155T00_NETGEAR"}, + {{BCM47XX_BOARD_NETGEAR_WNDR3400V2, "Netgear WNDR3400 V2"}, "U12H187T00_NETGEAR"}, + {{BCM47XX_BOARD_NETGEAR_WNDR3400VCNA, "Netgear WNDR3400 Vcna"}, "U12H155T01_NETGEAR"}, + {{BCM47XX_BOARD_NETGEAR_WNDR3700V3, "Netgear WNDR3700 V3"}, "U12H194T00_NETGEAR"}, + {{BCM47XX_BOARD_NETGEAR_WNDR4000, "Netgear WNDR4000"}, "U12H181T00_NETGEAR"}, + {{BCM47XX_BOARD_NETGEAR_WNDR4500V1, "Netgear WNDR4500 V1"}, "U12H189T00_NETGEAR"}, + {{BCM47XX_BOARD_NETGEAR_WNDR4500V2, "Netgear WNDR4500 V2"}, "U12H224T00_NETGEAR"}, + {{BCM47XX_BOARD_NETGEAR_WNR2000, "Netgear WNR2000"}, "U12H114T00_NETGEAR"}, + {{BCM47XX_BOARD_NETGEAR_WNR3500L, "Netgear WNR3500L"}, "U12H136T99_NETGEAR"}, + {{BCM47XX_BOARD_NETGEAR_WNR3500U, "Netgear WNR3500U"}, "U12H136T00_NETGEAR"}, + {{BCM47XX_BOARD_NETGEAR_WNR3500V2, "Netgear WNR3500 V2"}, "U12H127T00_NETGEAR"}, + {{BCM47XX_BOARD_NETGEAR_WNR3500V2VC, "Netgear WNR3500 V2vc"}, "U12H127T70_NETGEAR"}, + {{BCM47XX_BOARD_NETGEAR_WNR834BV2, "Netgear WNR834B V2"}, "U12H081T00_NETGEAR"}, + { {0}, 0}, +}; + +/* boardtype, boardnum, boardrev */ +static const +struct bcm47xx_board_type_list3 bcm47xx_board_list_board[] __initconst = { + {{BCM47XX_BOARD_HUAWEI_E970, "Huawei E970"}, "0x048e", "0x5347", "0x11"}, + {{BCM47XX_BOARD_PHICOMM_M1, "Phicomm M1"}, "0x0590", "80", "0x1104"}, + {{BCM47XX_BOARD_ZTE_H218N, "ZTE H218N"}, "0x053d", "1234", "0x1305"}, + { {0}, 0}, +}; + +static const +struct bcm47xx_board_type bcm47xx_board_unknown[] __initconst = { + {BCM47XX_BOARD_UNKNOWN, "Unknown Board"}, +}; + +static struct bcm47xx_board_store bcm47xx_board = {BCM47XX_BOARD_NO, "Unknown Board"}; + +static __init const struct bcm47xx_board_type *bcm47xx_board_get_nvram(void) +{ + char buf1[30]; + char buf2[30]; + char buf3[30]; + const struct bcm47xx_board_type_list1 *e1; + const struct bcm47xx_board_type_list2 *e2; + const struct bcm47xx_board_type_list3 *e3; + + if (bcm47xx_nvram_getenv("model_name", buf1, sizeof(buf1)) >= 0) { + for (e1 = bcm47xx_board_list_model_name; e1->value1; e1++) { + if (!strcmp(buf1, e1->value1)) + return &e1->board; + } + } + + if (bcm47xx_nvram_getenv("model_no", buf1, sizeof(buf1)) >= 0) { + for (e1 = bcm47xx_board_list_model_no; e1->value1; e1++) { + if (strstarts(buf1, e1->value1)) + return &e1->board; + } + } + + if (bcm47xx_nvram_getenv("machine_name", buf1, sizeof(buf1)) >= 0) { + for (e1 = bcm47xx_board_list_machine_name; e1->value1; e1++) { + if (strstarts(buf1, e1->value1)) + return &e1->board; + } + } + + if (bcm47xx_nvram_getenv("hardware_version", buf1, sizeof(buf1)) >= 0) { + for (e1 = bcm47xx_board_list_hardware_version; e1->value1; e1++) { + if (strstarts(buf1, e1->value1)) + return &e1->board; + } + } + + if (bcm47xx_nvram_getenv("productid", buf1, sizeof(buf1)) >= 0) { + for (e1 = bcm47xx_board_list_productid; e1->value1; e1++) { + if (!strcmp(buf1, e1->value1)) + return &e1->board; + } + } + + if (bcm47xx_nvram_getenv("ModelId", buf1, sizeof(buf1)) >= 0) { + for (e1 = bcm47xx_board_list_ModelId; e1->value1; e1++) { + if (!strcmp(buf1, e1->value1)) + return &e1->board; + } + } + + if (bcm47xx_nvram_getenv("melco_id", buf1, sizeof(buf1)) >= 0 || + bcm47xx_nvram_getenv("buf1falo_id", buf1, sizeof(buf1)) >= 0) { + /* buffalo hardware, check id for specific hardware matches */ + for (e1 = bcm47xx_board_list_melco_id; e1->value1; e1++) { + if (!strcmp(buf1, e1->value1)) + return &e1->board; + } + } + + if (bcm47xx_nvram_getenv("boot_hw_model", buf1, sizeof(buf1)) >= 0 && + bcm47xx_nvram_getenv("boot_hw_ver", buf2, sizeof(buf2)) >= 0) { + for (e2 = bcm47xx_board_list_boot_hw; e2->value1; e2++) { + if (!strcmp(buf1, e2->value1) && + !strcmp(buf2, e2->value2)) + return &e2->board; + } + } + + if (bcm47xx_nvram_getenv("board_id", buf1, sizeof(buf1)) >= 0) { + for (e1 = bcm47xx_board_list_board_id; e1->value1; e1++) { + if (!strcmp(buf1, e1->value1)) + return &e1->board; + } + } + + if (bcm47xx_nvram_getenv("boardtype", buf1, sizeof(buf1)) >= 0 && + bcm47xx_nvram_getenv("boardnum", buf2, sizeof(buf2)) >= 0 && + bcm47xx_nvram_getenv("boardrev", buf3, sizeof(buf3)) >= 0) { + for (e3 = bcm47xx_board_list_board; e3->value1; e3++) { + if (!strcmp(buf1, e3->value1) && + !strcmp(buf2, e3->value2) && + !strcmp(buf3, e3->value3)) + return &e3->board; + } + } + return bcm47xx_board_unknown; +} + +void __init bcm47xx_board_detect(void) +{ + int err; + char buf[10]; + const struct bcm47xx_board_type *board_detected; + + if (bcm47xx_board.board != BCM47XX_BOARD_NO) + return; + + /* check if the nvram is available */ + err = bcm47xx_nvram_getenv("boardtype", buf, sizeof(buf)); + + /* init of nvram failed, probably too early now */ + if (err == -ENXIO) { + return; + } + + board_detected = bcm47xx_board_get_nvram(); + bcm47xx_board.board = board_detected->board; + strlcpy(bcm47xx_board.name, board_detected->name, + BCM47XX_BOARD_MAX_NAME); +} + +enum bcm47xx_board bcm47xx_board_get(void) +{ + return bcm47xx_board.board; +} +EXPORT_SYMBOL(bcm47xx_board_get); + +const char *bcm47xx_board_get_name(void) +{ + return bcm47xx_board.name; +} +EXPORT_SYMBOL(bcm47xx_board_get_name); diff --git a/arch/mips/bcm47xx/nvram.c b/arch/mips/bcm47xx/nvram.c index cc40b74940f..b4c585b1c62 100644 --- a/arch/mips/bcm47xx/nvram.c +++ b/arch/mips/bcm47xx/nvram.c @@ -190,3 +190,23 @@ int bcm47xx_nvram_getenv(char *name, char *val, size_t val_len) return -ENOENT; } EXPORT_SYMBOL(bcm47xx_nvram_getenv); + +int bcm47xx_nvram_gpio_pin(const char *name) +{ + int i, err; + char nvram_var[10]; + char buf[30]; + + for (i = 0; i < 16; i++) { + err = snprintf(nvram_var, sizeof(nvram_var), "gpio%i", i); + if (err <= 0) + continue; + err = bcm47xx_nvram_getenv(nvram_var, buf, sizeof(buf)); + if (err <= 0) + continue; + if (!strcmp(name, buf)) + return i; + } + return -ENOENT; +} +EXPORT_SYMBOL(bcm47xx_nvram_gpio_pin); diff --git a/arch/mips/bcm47xx/prom.c b/arch/mips/bcm47xx/prom.c index 8c155afb129..5cba318bc1c 100644 --- a/arch/mips/bcm47xx/prom.c +++ b/arch/mips/bcm47xx/prom.c @@ -32,12 +32,37 @@ #include <asm/bootinfo.h> #include <asm/fw/cfe/cfe_api.h> #include <asm/fw/cfe/cfe_error.h> +#include <bcm47xx.h> +#include <bcm47xx_board.h> static int cfe_cons_handle; +static u16 get_chip_id(void) +{ + switch (bcm47xx_bus_type) { +#ifdef CONFIG_BCM47XX_SSB + case BCM47XX_BUS_TYPE_SSB: + return bcm47xx_bus.ssb.chip_id; +#endif +#ifdef CONFIG_BCM47XX_BCMA + case BCM47XX_BUS_TYPE_BCMA: + return bcm47xx_bus.bcma.bus.chipinfo.id; +#endif + } + return 0; +} + const char *get_system_type(void) { - return "Broadcom BCM47XX"; + static char buf[50]; + u16 chip_id = get_chip_id(); + + snprintf(buf, sizeof(buf), + (chip_id > 0x9999) ? "Broadcom BCM%d (%s)" : + "Broadcom BCM%04X (%s)", + chip_id, bcm47xx_board_get_name()); + + return buf; } void prom_putchar(char c) diff --git a/arch/mips/bcm47xx/setup.c b/arch/mips/bcm47xx/setup.c index b2246cd9ca1..1f30571968e 100644 --- a/arch/mips/bcm47xx/setup.c +++ b/arch/mips/bcm47xx/setup.c @@ -36,6 +36,7 @@ #include <asm/time.h> #include <bcm47xx.h> #include <bcm47xx_nvram.h> +#include <bcm47xx_board.h> union bcm47xx_bus bcm47xx_bus; EXPORT_SYMBOL(bcm47xx_bus); @@ -221,6 +222,7 @@ void __init plat_mem_setup(void) _machine_restart = bcm47xx_machine_restart; _machine_halt = bcm47xx_machine_halt; pm_power_off = bcm47xx_machine_halt; + bcm47xx_board_detect(); } static int __init bcm47xx_register_bus_complete(void) diff --git a/arch/mips/bcm47xx/time.c b/arch/mips/bcm47xx/time.c index 536374dcba7..2c85d9254b5 100644 --- a/arch/mips/bcm47xx/time.c +++ b/arch/mips/bcm47xx/time.c @@ -27,10 +27,16 @@ #include <linux/ssb/ssb.h> #include <asm/time.h> #include <bcm47xx.h> +#include <bcm47xx_nvram.h> +#include <bcm47xx_board.h> void __init plat_time_init(void) { unsigned long hz = 0; + u16 chip_id = 0; + char buf[10]; + int len; + enum bcm47xx_board board = bcm47xx_board_get(); /* * Use deterministic values for initial counter interrupt @@ -43,15 +49,32 @@ void __init plat_time_init(void) #ifdef CONFIG_BCM47XX_SSB case BCM47XX_BUS_TYPE_SSB: hz = ssb_cpu_clock(&bcm47xx_bus.ssb.mipscore) / 2; + chip_id = bcm47xx_bus.ssb.chip_id; break; #endif #ifdef CONFIG_BCM47XX_BCMA case BCM47XX_BUS_TYPE_BCMA: hz = bcma_cpu_clock(&bcm47xx_bus.bcma.bus.drv_mips) / 2; + chip_id = bcm47xx_bus.bcma.bus.chipinfo.id; break; #endif } + if (chip_id == 0x5354) { + len = bcm47xx_nvram_getenv("clkfreq", buf, sizeof(buf)); + if (len >= 0 && !strncmp(buf, "200", 4)) + hz = 100000000; + } + + switch (board) { + case BCM47XX_BOARD_ASUS_WL520GC: + case BCM47XX_BOARD_ASUS_WL520GU: + hz = 100000000; + break; + default: + break; + } + if (!hz) hz = 100000000; diff --git a/arch/mips/boot/compressed/Makefile b/arch/mips/boot/compressed/Makefile index 0048c089789..ca0c343c9ea 100644 --- a/arch/mips/boot/compressed/Makefile +++ b/arch/mips/boot/compressed/Makefile @@ -37,6 +37,10 @@ vmlinuzobjs-$(CONFIG_SYS_SUPPORTS_ZBOOT_UART16550) += $(obj)/uart-16550.o vmlinuzobjs-$(CONFIG_MIPS_ALCHEMY) += $(obj)/uart-alchemy.o endif +ifdef CONFIG_KERNEL_XZ +vmlinuzobjs-y += $(obj)/../../lib/ashldi3.o +endif + targets += vmlinux.bin OBJCOPYFLAGS_vmlinux.bin := $(OBJCOPYFLAGS) -O binary -R .comment -S $(obj)/vmlinux.bin: $(KBUILD_IMAGE) FORCE @@ -44,8 +48,10 @@ $(obj)/vmlinux.bin: $(KBUILD_IMAGE) FORCE tool_$(CONFIG_KERNEL_GZIP) = gzip tool_$(CONFIG_KERNEL_BZIP2) = bzip2 +tool_$(CONFIG_KERNEL_LZ4) = lz4 tool_$(CONFIG_KERNEL_LZMA) = lzma tool_$(CONFIG_KERNEL_LZO) = lzo +tool_$(CONFIG_KERNEL_XZ) = xzkern targets += vmlinux.bin.z $(obj)/vmlinux.bin.z: $(obj)/vmlinux.bin FORCE diff --git a/arch/mips/boot/compressed/decompress.c b/arch/mips/boot/compressed/decompress.c index 2c9573098c0..a8c6fd6a440 100644 --- a/arch/mips/boot/compressed/decompress.c +++ b/arch/mips/boot/compressed/decompress.c @@ -43,7 +43,8 @@ void error(char *x) /* activate the code for pre-boot environment */ #define STATIC static -#ifdef CONFIG_KERNEL_GZIP +#if defined(CONFIG_KERNEL_GZIP) || defined(CONFIG_KERNEL_XZ) || \ + defined(CONFIG_KERNEL_LZ4) void *memcpy(void *dest, const void *src, size_t n) { int i; @@ -54,6 +55,8 @@ void *memcpy(void *dest, const void *src, size_t n) d[i] = s[i]; return dest; } +#endif +#ifdef CONFIG_KERNEL_GZIP #include "../../../../lib/decompress_inflate.c" #endif @@ -70,6 +73,10 @@ void *memset(void *s, int c, size_t n) #include "../../../../lib/decompress_bunzip2.c" #endif +#ifdef CONFIG_KERNEL_LZ4 +#include "../../../../lib/decompress_unlz4.c" +#endif + #ifdef CONFIG_KERNEL_LZMA #include "../../../../lib/decompress_unlzma.c" #endif @@ -78,6 +85,10 @@ void *memset(void *s, int c, size_t n) #include "../../../../lib/decompress_unlzo.c" #endif +#ifdef CONFIG_KERNEL_XZ +#include "../../../../lib/decompress_unxz.c" +#endif + void decompress_kernel(unsigned long boot_heap_start) { unsigned long zimage_start, zimage_size; diff --git a/arch/mips/boot/compressed/ld.script b/arch/mips/boot/compressed/ld.script index 8e6b07ca2f5..5a33409c7f6 100644 --- a/arch/mips/boot/compressed/ld.script +++ b/arch/mips/boot/compressed/ld.script @@ -8,6 +8,9 @@ OUTPUT_ARCH(mips) ENTRY(start) +PHDRS { + text PT_LOAD FLAGS(7); /* RWX */ +} SECTIONS { /* Text and read-only data */ @@ -15,7 +18,7 @@ SECTIONS .text : { *(.text) *(.rodata) - } + }: text /* End of text section */ /* Writable data */ diff --git a/arch/mips/boot/ecoff.h b/arch/mips/boot/ecoff.h index 83e5c3813d6..7a75ce2c1bc 100644 --- a/arch/mips/boot/ecoff.h +++ b/arch/mips/boot/ecoff.h @@ -12,7 +12,6 @@ typedef struct filehdr { } FILHDR; #define FILHSZ sizeof(FILHDR) -#define OMAGIC 0407 #define MIPSEBMAGIC 0x160 #define MIPSELMAGIC 0x162 diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c index b212ae12e5a..331b837cec5 100644 --- a/arch/mips/cavium-octeon/setup.c +++ b/arch/mips/cavium-octeon/setup.c @@ -999,7 +999,7 @@ void __init plat_mem_setup(void) if (total == 0) panic("Unable to allocate memory from " - "cvmx_bootmem_phy_alloc\n"); + "cvmx_bootmem_phy_alloc"); } /* @@ -1081,7 +1081,7 @@ void __init device_tree_init(void) /* Copy the default tree from init memory. */ initial_boot_params = early_init_dt_alloc_memory_arch(dt_size, 8); if (initial_boot_params == NULL) - panic("Could not allocate initial_boot_params\n"); + panic("Could not allocate initial_boot_params"); memcpy(initial_boot_params, fdt, dt_size); if (do_prune) { diff --git a/arch/mips/cobalt/Makefile b/arch/mips/cobalt/Makefile index 61a334ac43a..558e9497794 100644 --- a/arch/mips/cobalt/Makefile +++ b/arch/mips/cobalt/Makefile @@ -5,5 +5,4 @@ obj-y := buttons.o irq.o lcd.o led.o reset.o rtc.o serial.o setup.o time.o obj-$(CONFIG_PCI) += pci.o -obj-$(CONFIG_EARLY_PRINTK) += console.o obj-$(CONFIG_MTD_PHYSMAP) += mtd.o diff --git a/arch/mips/cobalt/console.c b/arch/mips/cobalt/console.c deleted file mode 100644 index d1ba701c9dd..00000000000 --- a/arch/mips/cobalt/console.c +++ /dev/null @@ -1,20 +0,0 @@ -/* - * (C) P. Horton 2006 - */ -#include <linux/io.h> -#include <linux/serial_reg.h> - -#include <cobalt.h> - -#define UART_BASE ((void __iomem *)CKSEG1ADDR(0x1c800000)) - -void prom_putchar(char c) -{ - if (cobalt_board_id <= COBALT_BRD_ID_QUBE1) - return; - - while (!(readb(UART_BASE + UART_LSR) & UART_LSR_THRE)) - ; - - writeb(c, UART_BASE + UART_TX); -} diff --git a/arch/mips/cobalt/setup.c b/arch/mips/cobalt/setup.c index ec3b2c417f7..9a8c2fe8d33 100644 --- a/arch/mips/cobalt/setup.c +++ b/arch/mips/cobalt/setup.c @@ -17,6 +17,7 @@ #include <asm/bootinfo.h> #include <asm/reboot.h> +#include <asm/setup.h> #include <asm/gt64120.h> #include <cobalt.h> @@ -112,6 +113,8 @@ void __init prom_init(void) } add_memory_region(0x0, memsz, BOOT_MEM_RAM); + + setup_8250_early_printk_port(CKSEG1ADDR(0x1c800000), 0, 0); } void __init prom_free_prom_memory(void) diff --git a/arch/mips/configs/powertv_defconfig b/arch/mips/configs/powertv_defconfig deleted file mode 100644 index 7fda0ce5f69..00000000000 --- a/arch/mips/configs/powertv_defconfig +++ /dev/null @@ -1,136 +0,0 @@ -CONFIG_POWERTV=y -CONFIG_BOOTLOADER_FAMILY="R2" -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_HZ_1000=y -CONFIG_PREEMPT=y -# CONFIG_SECCOMP is not set -CONFIG_EXPERIMENTAL=y -CONFIG_CROSS_COMPILE="" -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=16 -CONFIG_RELAY=y -CONFIG_BLK_DEV_INITRD=y -# CONFIG_RD_GZIP is not set -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_EXPERT=y -# CONFIG_SYSCTL_SYSCALL is not set -CONFIG_KALLSYMS_ALL=y -# CONFIG_PCSPKR_PLATFORM is not set -# CONFIG_EPOLL is not set -# CONFIG_SIGNALFD is not set -# CONFIG_EVENTFD is not set -# CONFIG_VM_EVENT_COUNTERS is not set -# CONFIG_SLUB_DEBUG is not set -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_PCI=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_IP_PNP=y -CONFIG_SYN_COOKIES=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -CONFIG_IPV6=y -CONFIG_IPV6_PRIVACY=y -CONFIG_INET6_AH=y -CONFIG_INET6_ESP=y -CONFIG_INET6_IPCOMP=y -# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET6_XFRM_MODE_TUNNEL is not set -# CONFIG_INET6_XFRM_MODE_BEET is not set -# CONFIG_IPV6_SIT is not set -CONFIG_IPV6_TUNNEL=y -CONFIG_NETFILTER=y -# CONFIG_BRIDGE_NETFILTER is not set -CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y -CONFIG_IP_NF_IPTABLES=y -CONFIG_IP_NF_FILTER=y -CONFIG_IP_NF_ARPTABLES=y -CONFIG_IP_NF_ARPFILTER=y -CONFIG_IP6_NF_IPTABLES=y -CONFIG_IP6_NF_FILTER=y -CONFIG_BRIDGE=y -CONFIG_NET_SCHED=y -CONFIG_NET_SCH_TBF=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_NAND=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=32768 -# CONFIG_MISC_DEVICES is not set -# CONFIG_SCSI_PROC_FS is not set -CONFIG_BLK_DEV_SD=y -# CONFIG_SCSI_LOWLEVEL is not set -CONFIG_ATA=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -# CONFIG_WLAN is not set -CONFIG_USB_RTL8150=y -# CONFIG_INPUT_MOUSEDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -# CONFIG_VT is not set -# CONFIG_DEVKMEM is not set -# CONFIG_LEGACY_PTYS is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set -# CONFIG_MFD_SUPPORT is not set -# CONFIG_VGA_ARB is not set -CONFIG_USB_HIDDEV=y -CONFIG_USB=y -CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_DEVICE_CLASS is not set -CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_TT_NEWSCHED is not set -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_SERIAL=y -CONFIG_USB_SERIAL_CONSOLE=y -CONFIG_USB_SERIAL_CP210X=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set -# CONFIG_EXT3_FS_XATTR is not set -# CONFIG_DNOTIFY is not set -CONFIG_FUSE_FS=y -CONFIG_PROC_KCORE=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -CONFIG_PRINTK_TIME=y -CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DETECT_HUNG_TASK=y -# CONFIG_SCHED_DEBUG is not set -# CONFIG_DEBUG_PREEMPT is not set -CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -# CONFIG_EARLY_PRINTK is not set -CONFIG_CMDLINE_BOOL=y -# CONFIG_CRYPTO_ANSI_CPRNG is not set -# CONFIG_CRYPTO_HW is not set diff --git a/arch/mips/dec/int-handler.S b/arch/mips/dec/int-handler.S index 22afed16ccd..41a2fa1fa12 100644 --- a/arch/mips/dec/int-handler.S +++ b/arch/mips/dec/int-handler.S @@ -118,7 +118,7 @@ * 7 FPU/R4k timer * * We handle the IRQ according to _our_ priority (see setup.c), - * then we just return. If multiple IRQs are pending then we will + * then we just return. If multiple IRQs are pending then we will * just take another exception, big deal. */ .align 5 @@ -146,7 +146,7 @@ /* * Find irq with highest priority */ - PTR_LA t1,cpu_mask_nr_tbl + PTR_LA t1,cpu_mask_nr_tbl 1: lw t2,(t1) nop and t2,t0 @@ -195,7 +195,7 @@ /* * Find irq with highest priority */ - PTR_LA t1,asic_mask_nr_tbl + PTR_LA t1,asic_mask_nr_tbl 2: lw t2,(t1) nop and t2,t0 @@ -221,7 +221,7 @@ FEXPORT(cpu_all_int) # HALT, timers, software junk li a0,DEC_CPU_IRQ_BASE srl t0,CAUSEB_IP - li t1,CAUSEF_IP>>CAUSEB_IP # mask + li t1,CAUSEF_IP>>CAUSEB_IP # mask b 1f li t2,4 # nr of bits / 2 diff --git a/arch/mips/dec/ioasic-irq.c b/arch/mips/dec/ioasic-irq.c index 4b3e3a4375a..e04d973ce5a 100644 --- a/arch/mips/dec/ioasic-irq.c +++ b/arch/mips/dec/ioasic-irq.c @@ -1,7 +1,7 @@ /* * DEC I/O ASIC interrupts. * - * Copyright (c) 2002, 2003 Maciej W. Rozycki + * Copyright (c) 2002, 2003, 2013 Maciej W. Rozycki * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -51,22 +51,51 @@ static struct irq_chip ioasic_irq_type = { .irq_unmask = unmask_ioasic_irq, }; -void clear_ioasic_dma_irq(unsigned int irq) +static void clear_ioasic_dma_irq(struct irq_data *d) { u32 sir; - sir = ~(1 << (irq - ioasic_irq_base)); + sir = ~(1 << (d->irq - ioasic_irq_base)); ioasic_write(IO_REG_SIR, sir); + fast_iob(); } static struct irq_chip ioasic_dma_irq_type = { .name = "IO-ASIC-DMA", - .irq_ack = ack_ioasic_irq, + .irq_ack = clear_ioasic_dma_irq, .irq_mask = mask_ioasic_irq, - .irq_mask_ack = ack_ioasic_irq, .irq_unmask = unmask_ioasic_irq, + .irq_eoi = clear_ioasic_dma_irq, }; +/* + * I/O ASIC implements two kinds of DMA interrupts, informational and + * error interrupts. + * + * The formers do not stop DMA and should be cleared as soon as possible + * so that if they retrigger before the handler has completed, usually as + * a side effect of actions taken by the handler, then they are reissued. + * These use the `handle_edge_irq' handler that clears the request right + * away. + * + * The latters stop DMA and do not resume it until the interrupt has been + * cleared. This cannot be done until after a corrective action has been + * taken and this also means they will not retrigger. Therefore they use + * the `handle_fasteoi_irq' handler that only clears the request on the + * way out. Because MIPS processor interrupt inputs, one of which the I/O + * ASIC is cascaded to, are level-triggered it is recommended that error + * DMA interrupt action handlers are registered with the IRQF_ONESHOT flag + * set so that they are run with the interrupt line masked. + * + * This mask has `1' bits in the positions of informational interrupts. + */ +#define IO_IRQ_DMA_INFO \ + (IO_IRQ_MASK(IO_INR_SCC0A_RXDMA) | \ + IO_IRQ_MASK(IO_INR_SCC1A_RXDMA) | \ + IO_IRQ_MASK(IO_INR_ISDN_TXDMA) | \ + IO_IRQ_MASK(IO_INR_ISDN_RXDMA) | \ + IO_IRQ_MASK(IO_INR_ASC_DMA)) + void __init init_ioasic_irqs(int base) { int i; @@ -79,7 +108,9 @@ void __init init_ioasic_irqs(int base) irq_set_chip_and_handler(i, &ioasic_irq_type, handle_level_irq); for (; i < base + IO_IRQ_LINES; i++) - irq_set_chip(i, &ioasic_dma_irq_type); + irq_set_chip_and_handler(i, &ioasic_dma_irq_type, + 1 << (i - base) & IO_IRQ_DMA_INFO ? + handle_edge_irq : handle_fasteoi_irq); ioasic_irq_base = base; } diff --git a/arch/mips/dec/prom/call_o32.S b/arch/mips/dec/prom/call_o32.S index c0d1522d448..8c8498159e4 100644 --- a/arch/mips/dec/prom/call_o32.S +++ b/arch/mips/dec/prom/call_o32.S @@ -14,7 +14,7 @@ /* Maximum number of arguments supported. Must be even! */ #define O32_ARGC 32 -/* Number of static registers we save. */ +/* Number of static registers we save. */ #define O32_STATC 11 /* Frame size for both of the above. */ #define O32_FRAMESZ (4 * O32_ARGC + SZREG * O32_STATC) diff --git a/arch/mips/dec/prom/init.c b/arch/mips/dec/prom/init.c index 468f665de7b..4e1761e0a09 100644 --- a/arch/mips/dec/prom/init.c +++ b/arch/mips/dec/prom/init.c @@ -104,7 +104,7 @@ void __init prom_init(void) if (prom_is_rex(magic)) rex_clear_cache(); - /* Register the early console. */ + /* Register the early console. */ register_prom_console(); /* Were we compiled with the right CPU option? */ diff --git a/arch/mips/dec/prom/memory.c b/arch/mips/dec/prom/memory.c index 0aadac74290..8c62316f22f 100644 --- a/arch/mips/dec/prom/memory.c +++ b/arch/mips/dec/prom/memory.c @@ -22,7 +22,7 @@ volatile unsigned long mem_err; /* So we know an error occurred */ /* * Probe memory in 4MB chunks, waiting for an error to tell us we've fallen - * off the end of real memory. Only suitable for the 2100/3100's (PMAX). + * off the end of real memory. Only suitable for the 2100/3100's (PMAX). */ #define CHUNK_SIZE 0x400000 diff --git a/arch/mips/dec/setup.c b/arch/mips/dec/setup.c index 741cb4235bd..56e6e2c2368 100644 --- a/arch/mips/dec/setup.c +++ b/arch/mips/dec/setup.c @@ -65,7 +65,7 @@ EXPORT_SYMBOL(ioasic_base); /* * IRQ routing and priority tables. Priorites are set as follows: * - * KN01 KN230 KN02 KN02-BA KN02-CA KN03 + * KN01 KN230 KN02 KN02-BA KN02-CA KN03 * * MEMORY CPU CPU CPU ASIC CPU CPU * RTC CPU CPU CPU ASIC CPU CPU @@ -413,7 +413,7 @@ static void __init dec_init_kn02(void) /* * Machine-specific initialisation for KN02-BA, aka DS5000/1xx - * (xx = 20, 25, 33), aka 3min. Also applies to KN04(-BA), aka + * (xx = 20, 25, 33), aka 3min. Also applies to KN04(-BA), aka * DS5000/150, aka 4min. */ static int kn02ba_interrupt[DEC_NR_INTS] __initdata = { diff --git a/arch/mips/include/asm/addrspace.h b/arch/mips/include/asm/addrspace.h index 13d61c002e4..3f745459fdb 100644 --- a/arch/mips/include/asm/addrspace.h +++ b/arch/mips/include/asm/addrspace.h @@ -58,7 +58,7 @@ /* * Memory segments (64bit kernel mode addresses) - * The compatibility segments use the full 64-bit sign extended value. Note + * The compatibility segments use the full 64-bit sign extended value. Note * the R8000 doesn't have them so don't reference these in generic MIPS code. */ #define XKUSEG _CONST64_(0x0000000000000000) @@ -131,7 +131,7 @@ /* * The ultimate limited of the 64-bit MIPS architecture: 2 bits for selecting - * the region, 3 bits for the CCA mode. This leaves 59 bits of which the + * the region, 3 bits for the CCA mode. This leaves 59 bits of which the * R8000 implements most with its 48-bit physical address space. */ #define TO_PHYS_MASK _CONST64_(0x07ffffffffffffff) /* 2^^59 - 1 */ diff --git a/arch/mips/include/asm/atomic.h b/arch/mips/include/asm/atomic.h index 08b607969a1..7eed2f26171 100644 --- a/arch/mips/include/asm/atomic.h +++ b/arch/mips/include/asm/atomic.h @@ -1,5 +1,5 @@ /* - * Atomic operations that C can't guarantee us. Useful for + * Atomic operations that C can't guarantee us. Useful for * resource counting etc.. * * But use these as seldom as possible since they are much more slower diff --git a/arch/mips/include/asm/barrier.h b/arch/mips/include/asm/barrier.h index 314ab553201..f26d8e1bf3c 100644 --- a/arch/mips/include/asm/barrier.h +++ b/arch/mips/include/asm/barrier.h @@ -18,7 +18,7 @@ * over this barrier. All reads preceding this primitive are guaranteed * to access memory (but not necessarily other CPUs' caches) before any * reads following this primitive that depend on the data return by - * any of the preceding reads. This primitive is much lighter weight than + * any of the preceding reads. This primitive is much lighter weight than * rmb() on most CPUs, and is never heavier weight than is * rmb(). * @@ -43,7 +43,7 @@ * </programlisting> * * because the read of "*q" depends on the read of "p" and these - * two reads are separated by a read_barrier_depends(). However, + * two reads are separated by a read_barrier_depends(). However, * the following code, with the same initial values for "a" and "b": * * <programlisting> @@ -57,7 +57,7 @@ * </programlisting> * * does not enforce ordering, since there is no data dependency between - * the read of "a" and the read of "b". Therefore, on some CPUs, such + * the read of "a" and the read of "b". Therefore, on some CPUs, such * as Alpha, "y" could be set to 3 and "x" to 0. Use rmb() * in cases like this where there are no data dependencies. */ diff --git a/arch/mips/include/asm/cacheops.h b/arch/mips/include/asm/cacheops.h index 68f37e3eccc..c75025f27c2 100644 --- a/arch/mips/include/asm/cacheops.h +++ b/arch/mips/include/asm/cacheops.h @@ -14,56 +14,52 @@ /* * Cache Operations available on all MIPS processors with R4000-style caches */ -#define Index_Invalidate_I 0x00 -#define Index_Writeback_Inv_D 0x01 -#define Index_Load_Tag_I 0x04 -#define Index_Load_Tag_D 0x05 -#define Index_Store_Tag_I 0x08 -#define Index_Store_Tag_D 0x09 -#if defined(CONFIG_CPU_LOONGSON2) -#define Hit_Invalidate_I 0x00 -#else -#define Hit_Invalidate_I 0x10 -#endif -#define Hit_Invalidate_D 0x11 -#define Hit_Writeback_Inv_D 0x15 +#define Index_Invalidate_I 0x00 +#define Index_Writeback_Inv_D 0x01 +#define Index_Load_Tag_I 0x04 +#define Index_Load_Tag_D 0x05 +#define Index_Store_Tag_I 0x08 +#define Index_Store_Tag_D 0x09 +#define Hit_Invalidate_I 0x10 +#define Hit_Invalidate_D 0x11 +#define Hit_Writeback_Inv_D 0x15 /* * R4000-specific cacheops */ -#define Create_Dirty_Excl_D 0x0d -#define Fill 0x14 -#define Hit_Writeback_I 0x18 -#define Hit_Writeback_D 0x19 +#define Create_Dirty_Excl_D 0x0d +#define Fill 0x14 +#define Hit_Writeback_I 0x18 +#define Hit_Writeback_D 0x19 /* * R4000SC and R4400SC-specific cacheops */ -#define Index_Invalidate_SI 0x02 -#define Index_Writeback_Inv_SD 0x03 -#define Index_Load_Tag_SI 0x06 -#define Index_Load_Tag_SD 0x07 -#define Index_Store_Tag_SI 0x0A -#define Index_Store_Tag_SD 0x0B -#define Create_Dirty_Excl_SD 0x0f -#define Hit_Invalidate_SI 0x12 -#define Hit_Invalidate_SD 0x13 -#define Hit_Writeback_Inv_SD 0x17 -#define Hit_Writeback_SD 0x1b -#define Hit_Set_Virtual_SI 0x1e -#define Hit_Set_Virtual_SD 0x1f +#define Index_Invalidate_SI 0x02 +#define Index_Writeback_Inv_SD 0x03 +#define Index_Load_Tag_SI 0x06 +#define Index_Load_Tag_SD 0x07 +#define Index_Store_Tag_SI 0x0A +#define Index_Store_Tag_SD 0x0B +#define Create_Dirty_Excl_SD 0x0f +#define Hit_Invalidate_SI 0x12 +#define Hit_Invalidate_SD 0x13 +#define Hit_Writeback_Inv_SD 0x17 +#define Hit_Writeback_SD 0x1b +#define Hit_Set_Virtual_SI 0x1e +#define Hit_Set_Virtual_SD 0x1f /* * R5000-specific cacheops */ -#define R5K_Page_Invalidate_S 0x17 +#define R5K_Page_Invalidate_S 0x17 /* * RM7000-specific cacheops */ -#define Page_Invalidate_T 0x16 -#define Index_Store_Tag_T 0x0a -#define Index_Load_Tag_T 0x06 +#define Page_Invalidate_T 0x16 +#define Index_Store_Tag_T 0x0a +#define Index_Load_Tag_T 0x06 /* * R10000-specific cacheops @@ -71,17 +67,22 @@ * Cacheops 0x02, 0x06, 0x0a, 0x0c-0x0e, 0x16, 0x1a and 0x1e are unused. * Most of the _S cacheops are identical to the R4000SC _SD cacheops. */ -#define Index_Writeback_Inv_S 0x03 -#define Index_Load_Tag_S 0x07 -#define Index_Store_Tag_S 0x0B -#define Hit_Invalidate_S 0x13 -#define Cache_Barrier 0x14 -#define Hit_Writeback_Inv_S 0x17 -#define Index_Load_Data_I 0x18 -#define Index_Load_Data_D 0x19 -#define Index_Load_Data_S 0x1b -#define Index_Store_Data_I 0x1c -#define Index_Store_Data_D 0x1d -#define Index_Store_Data_S 0x1f +#define Index_Writeback_Inv_S 0x03 +#define Index_Load_Tag_S 0x07 +#define Index_Store_Tag_S 0x0B +#define Hit_Invalidate_S 0x13 +#define Cache_Barrier 0x14 +#define Hit_Writeback_Inv_S 0x17 +#define Index_Load_Data_I 0x18 +#define Index_Load_Data_D 0x19 +#define Index_Load_Data_S 0x1b +#define Index_Store_Data_I 0x1c +#define Index_Store_Data_D 0x1d +#define Index_Store_Data_S 0x1f + +/* + * Loongson2-specific cacheops + */ +#define Hit_Invalidate_I_Loongson23 0x00 #endif /* __ASM_CACHEOPS_H */ diff --git a/arch/mips/include/asm/dec/ioasic.h b/arch/mips/include/asm/dec/ioasic.h index a6e505a0e44..be4d62a5a10 100644 --- a/arch/mips/include/asm/dec/ioasic.h +++ b/arch/mips/include/asm/dec/ioasic.h @@ -31,8 +31,6 @@ static inline u32 ioasic_read(unsigned int reg) return ioasic_base[reg / 4]; } -extern void clear_ioasic_dma_irq(unsigned int irq); - extern void init_ioasic_irqs(int base); extern int dec_ioasic_clocksource_init(void); diff --git a/arch/mips/include/asm/dec/ioasic_addrs.h b/arch/mips/include/asm/dec/ioasic_addrs.h index a8665a7611c..8bd95971fe2 100644 --- a/arch/mips/include/asm/dec/ioasic_addrs.h +++ b/arch/mips/include/asm/dec/ioasic_addrs.h @@ -40,7 +40,7 @@ #define IOASIC_FLOPPY (11*IOASIC_SLOT_SIZE) /* FDC (maxine) */ #define IOASIC_SCSI (12*IOASIC_SLOT_SIZE) /* ASC SCSI */ #define IOASIC_FDC_DMA (13*IOASIC_SLOT_SIZE) /* FDC DMA (maxine) */ -#define IOASIC_SCSI_DMA (14*IOASIC_SLOT_SIZE) /* ??? */ +#define IOASIC_SCSI_DMA (14*IOASIC_SLOT_SIZE) /* ??? */ #define IOASIC_RES_15 (15*IOASIC_SLOT_SIZE) /* unused? */ diff --git a/arch/mips/include/asm/dec/kn01.h b/arch/mips/include/asm/dec/kn01.h index 0eb3241de70..88d9ffd7425 100644 --- a/arch/mips/include/asm/dec/kn01.h +++ b/arch/mips/include/asm/dec/kn01.h @@ -57,12 +57,12 @@ /* * System Control & Status Register bits. */ -#define KN01_CSR_MNFMOD (1<<15) /* MNFMOD manufacturing jumper */ -#define KN01_CSR_STATUS (1<<14) /* self-test result status output */ -#define KN01_CSR_PARDIS (1<<13) /* parity error disable */ -#define KN01_CSR_CRSRTST (1<<12) /* PCC test output */ -#define KN01_CSR_MONO (1<<11) /* mono/color fb SIMM installed */ -#define KN01_CSR_MEMERR (1<<10) /* write timeout error status & ack*/ +#define KN01_CSR_MNFMOD (1<<15) /* MNFMOD manufacturing jumper */ +#define KN01_CSR_STATUS (1<<14) /* self-test result status output */ +#define KN01_CSR_PARDIS (1<<13) /* parity error disable */ +#define KN01_CSR_CRSRTST (1<<12) /* PCC test output */ +#define KN01_CSR_MONO (1<<11) /* mono/color fb SIMM installed */ +#define KN01_CSR_MEMERR (1<<10) /* write timeout error status & ack*/ #define KN01_CSR_VINT (1<<9) /* PCC area detect #2 status & ack */ #define KN01_CSR_TXDIS (1<<8) /* DZ11 transmit disable */ #define KN01_CSR_VBGTRG (1<<2) /* blue DAC voltage over green (r/o) */ diff --git a/arch/mips/include/asm/dec/kn02ca.h b/arch/mips/include/asm/dec/kn02ca.h index 69dc2a9a2d0..92c0fe25609 100644 --- a/arch/mips/include/asm/dec/kn02ca.h +++ b/arch/mips/include/asm/dec/kn02ca.h @@ -68,7 +68,7 @@ #define KN03CA_IO_SSR_ISDN_RST (1<<12) /* ~ISDN (Am79C30A) reset */ #define KN03CA_IO_SSR_FLOPPY_RST (1<<7) /* ~FDC (82077) reset */ -#define KN03CA_IO_SSR_VIDEO_RST (1<<6) /* ~framebuffer reset */ +#define KN03CA_IO_SSR_VIDEO_RST (1<<6) /* ~framebuffer reset */ #define KN03CA_IO_SSR_AB_RST (1<<5) /* ACCESS.bus reset */ #define KN03CA_IO_SSR_RES_4 (1<<4) /* unused */ #define KN03CA_IO_SSR_RES_3 (1<<4) /* unused */ diff --git a/arch/mips/include/asm/dec/prom.h b/arch/mips/include/asm/dec/prom.h index 446577712be..c0ead631384 100644 --- a/arch/mips/include/asm/dec/prom.h +++ b/arch/mips/include/asm/dec/prom.h @@ -49,7 +49,7 @@ #ifdef CONFIG_64BIT -#define prom_is_rex(magic) 1 /* KN04 and KN05 are REX PROMs. */ +#define prom_is_rex(magic) 1 /* KN04 and KN05 are REX PROMs. */ #else /* !CONFIG_64BIT */ diff --git a/arch/mips/include/asm/elf.h b/arch/mips/include/asm/elf.h index cf3ae2480b1..a66359ef4ec 100644 --- a/arch/mips/include/asm/elf.h +++ b/arch/mips/include/asm/elf.h @@ -331,6 +331,7 @@ extern int dump_task_fpu(struct task_struct *, elf_fpregset_t *); #define ELF_CORE_COPY_FPREGS(tsk, elf_fpregs) \ dump_task_fpu(tsk, elf_fpregs) +#define CORE_DUMP_USE_REGSET #define ELF_EXEC_PAGESIZE PAGE_SIZE /* This yields a mask that user programs can use to figure out what diff --git a/arch/mips/include/asm/mach-ath79/ar933x_uart_platform.h b/arch/mips/include/asm/mach-ath79/ar933x_uart_platform.h deleted file mode 100644 index 6cb30f2b719..00000000000 --- a/arch/mips/include/asm/mach-ath79/ar933x_uart_platform.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * Platform data definition for Atheros AR933X UART - * - * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef _AR933X_UART_PLATFORM_H -#define _AR933X_UART_PLATFORM_H - -struct ar933x_uart_platform_data { - unsigned uartclk; -}; - -#endif /* _AR933X_UART_PLATFORM_H */ diff --git a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h new file mode 100644 index 00000000000..00867dd05a6 --- /dev/null +++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h @@ -0,0 +1,110 @@ +#ifndef __BCM47XX_BOARD_H +#define __BCM47XX_BOARD_H + +enum bcm47xx_board { + BCM47XX_BOARD_ASUS_RTAC66U, + BCM47XX_BOARD_ASUS_RTN10, + BCM47XX_BOARD_ASUS_RTN10D, + BCM47XX_BOARD_ASUS_RTN10U, + BCM47XX_BOARD_ASUS_RTN12, + BCM47XX_BOARD_ASUS_RTN12B1, + BCM47XX_BOARD_ASUS_RTN12C1, + BCM47XX_BOARD_ASUS_RTN12D1, + BCM47XX_BOARD_ASUS_RTN12HP, + BCM47XX_BOARD_ASUS_RTN15U, + BCM47XX_BOARD_ASUS_RTN16, + BCM47XX_BOARD_ASUS_RTN53, + BCM47XX_BOARD_ASUS_RTN66U, + BCM47XX_BOARD_ASUS_WL300G, + BCM47XX_BOARD_ASUS_WL320GE, + BCM47XX_BOARD_ASUS_WL330GE, + BCM47XX_BOARD_ASUS_WL500GD, + BCM47XX_BOARD_ASUS_WL500GPV1, + BCM47XX_BOARD_ASUS_WL500GPV2, + BCM47XX_BOARD_ASUS_WL500W, + BCM47XX_BOARD_ASUS_WL520GC, + BCM47XX_BOARD_ASUS_WL520GU, + BCM47XX_BOARD_ASUS_WL700GE, + BCM47XX_BOARD_ASUS_WLHDD, + + BCM47XX_BOARD_BELKIN_F7D4301, + + BCM47XX_BOARD_BUFFALO_WBR2_G54, + BCM47XX_BOARD_BUFFALO_WHR2_A54G54, + BCM47XX_BOARD_BUFFALO_WHR_G125, + BCM47XX_BOARD_BUFFALO_WHR_G54S, + BCM47XX_BOARD_BUFFALO_WHR_HP_G54, + BCM47XX_BOARD_BUFFALO_WLA2_G54L, + BCM47XX_BOARD_BUFFALO_WZR_G300N, + BCM47XX_BOARD_BUFFALO_WZR_RS_G54, + BCM47XX_BOARD_BUFFALO_WZR_RS_G54HP, + + BCM47XX_BOARD_CISCO_M10V1, + BCM47XX_BOARD_CISCO_M20V1, + + BCM47XX_BOARD_DELL_TM2300, + + BCM47XX_BOARD_DLINK_DIR130, + BCM47XX_BOARD_DLINK_DIR330, + + BCM47XX_BOARD_HUAWEI_E970, + + BCM47XX_BOARD_LINKSYS_E900V1, + BCM47XX_BOARD_LINKSYS_E1000V1, + BCM47XX_BOARD_LINKSYS_E1000V2, + BCM47XX_BOARD_LINKSYS_E1000V21, + BCM47XX_BOARD_LINKSYS_E1200V2, + BCM47XX_BOARD_LINKSYS_E2000V1, + BCM47XX_BOARD_LINKSYS_E3000V1, + BCM47XX_BOARD_LINKSYS_E3200V1, + BCM47XX_BOARD_LINKSYS_E4200V1, + BCM47XX_BOARD_LINKSYS_WRT150NV1, + BCM47XX_BOARD_LINKSYS_WRT150NV11, + BCM47XX_BOARD_LINKSYS_WRT160NV1, + BCM47XX_BOARD_LINKSYS_WRT160NV3, + BCM47XX_BOARD_LINKSYS_WRT300NV11, + BCM47XX_BOARD_LINKSYS_WRT310NV1, + BCM47XX_BOARD_LINKSYS_WRT310NV2, + BCM47XX_BOARD_LINKSYS_WRT54G3GV2, + BCM47XX_BOARD_LINKSYS_WRT610NV1, + BCM47XX_BOARD_LINKSYS_WRT610NV2, + BCM47XX_BOARD_LINKSYS_WRTSL54GS, + + BCM47XX_BOARD_MOTOROLA_WE800G, + BCM47XX_BOARD_MOTOROLA_WR850GP, + BCM47XX_BOARD_MOTOROLA_WR850GV2V3, + + BCM47XX_BOARD_NETGEAR_WGR614V8, + BCM47XX_BOARD_NETGEAR_WGR614V9, + BCM47XX_BOARD_NETGEAR_WNDR3300, + BCM47XX_BOARD_NETGEAR_WNDR3400V1, + BCM47XX_BOARD_NETGEAR_WNDR3400V2, + BCM47XX_BOARD_NETGEAR_WNDR3400VCNA, + BCM47XX_BOARD_NETGEAR_WNDR3700V3, + BCM47XX_BOARD_NETGEAR_WNDR4000, + BCM47XX_BOARD_NETGEAR_WNDR4500V1, + BCM47XX_BOARD_NETGEAR_WNDR4500V2, + BCM47XX_BOARD_NETGEAR_WNR2000, + BCM47XX_BOARD_NETGEAR_WNR3500L, + BCM47XX_BOARD_NETGEAR_WNR3500U, + BCM47XX_BOARD_NETGEAR_WNR3500V2, + BCM47XX_BOARD_NETGEAR_WNR3500V2VC, + BCM47XX_BOARD_NETGEAR_WNR834BV2, + + BCM47XX_BOARD_PHICOMM_M1, + + BCM47XX_BOARD_SIMPLETECH_SIMPLESHARE, + + BCM47XX_BOARD_ZTE_H218N, + + BCM47XX_BOARD_UNKNOWN, + BCM47XX_BOARD_NO, +}; + +#define BCM47XX_BOARD_MAX_NAME 30 + +void bcm47xx_board_detect(void); +enum bcm47xx_board bcm47xx_board_get(void); +const char *bcm47xx_board_get_name(void); + +#endif /* __BCM47XX_BOARD_H */ diff --git a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_nvram.h b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_nvram.h index b8e7be8f34d..36a3fc1aa3a 100644 --- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_nvram.h +++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_nvram.h @@ -48,4 +48,6 @@ static inline void bcm47xx_nvram_parse_macaddr(char *buf, u8 macaddr[6]) printk(KERN_WARNING "Can not parse mac address: %s\n", buf); } +int bcm47xx_nvram_gpio_pin(const char *name); + #endif /* __BCM47XX_NVRAM_H */ diff --git a/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h b/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h index 47fb247f966..f9f44865050 100644 --- a/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h +++ b/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h @@ -52,23 +52,11 @@ static inline int plat_dma_supported(struct device *dev, u64 mask) return 0; } -static inline void plat_extra_sync_for_device(struct device *dev) -{ - BUG(); -} - static inline int plat_device_is_coherent(struct device *dev) { return 1; } -static inline int plat_dma_mapping_error(struct device *dev, - dma_addr_t dma_addr) -{ - BUG(); - return 0; -} - dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr); phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr); diff --git a/arch/mips/include/asm/mach-dec/cpu-feature-overrides.h b/arch/mips/include/asm/mach-dec/cpu-feature-overrides.h new file mode 100644 index 00000000000..acce27fd2bb --- /dev/null +++ b/arch/mips/include/asm/mach-dec/cpu-feature-overrides.h @@ -0,0 +1,87 @@ +/* + * CPU feature overrides for DECstation systems. Two variations + * are generally applicable. + * + * Copyright (C) 2013 Maciej W. Rozycki + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef __ASM_MACH_DEC_CPU_FEATURE_OVERRIDES_H +#define __ASM_MACH_DEC_CPU_FEATURE_OVERRIDES_H + +/* Generic ones first. */ +#define cpu_has_tlb 1 +#define cpu_has_tx39_cache 0 +#define cpu_has_fpu 1 +#define cpu_has_divec 0 +#define cpu_has_prefetch 0 +#define cpu_has_mcheck 0 +#define cpu_has_ejtag 0 +#define cpu_has_mips16 0 +#define cpu_has_mdmx 0 +#define cpu_has_mips3d 0 +#define cpu_has_smartmips 0 +#define cpu_has_rixi 0 +#define cpu_has_vtag_icache 0 +#define cpu_has_ic_fills_f_dc 0 +#define cpu_has_pindexed_dcache 0 +#define cpu_has_local_ebase 0 +#define cpu_icache_snoops_remote_store 1 +#define cpu_has_mips_4 0 +#define cpu_has_mips_5 0 +#define cpu_has_mips32r1 0 +#define cpu_has_mips32r2 0 +#define cpu_has_mips64r1 0 +#define cpu_has_mips64r2 0 +#define cpu_has_dsp 0 +#define cpu_has_mipsmt 0 +#define cpu_has_userlocal 0 + +/* R3k-specific ones. */ +#ifdef CONFIG_CPU_R3000 +#define cpu_has_4kex 0 +#define cpu_has_3k_cache 1 +#define cpu_has_4k_cache 0 +#define cpu_has_32fpr 0 +#define cpu_has_counter 0 +#define cpu_has_watch 0 +#define cpu_has_vce 0 +#define cpu_has_cache_cdex_p 0 +#define cpu_has_cache_cdex_s 0 +#define cpu_has_llsc 0 +#define cpu_has_dc_aliases 0 +#define cpu_has_mips_2 0 +#define cpu_has_mips_3 0 +#define cpu_has_nofpuex 1 +#define cpu_has_inclusive_pcaches 0 +#define cpu_dcache_line_size() 4 +#define cpu_icache_line_size() 4 +#define cpu_scache_line_size() 0 +#endif /* CONFIG_CPU_R3000 */ + +/* R4k-specific ones. */ +#ifdef CONFIG_CPU_R4X00 +#define cpu_has_4kex 1 +#define cpu_has_3k_cache 0 +#define cpu_has_4k_cache 1 +#define cpu_has_32fpr 1 +#define cpu_has_counter 1 +#define cpu_has_watch 1 +#define cpu_has_vce 1 +#define cpu_has_cache_cdex_p 1 +#define cpu_has_cache_cdex_s 1 +#define cpu_has_llsc 1 +#define cpu_has_dc_aliases (PAGE_SIZE < 0x4000) +#define cpu_has_mips_2 1 +#define cpu_has_mips_3 1 +#define cpu_has_nofpuex 0 +#define cpu_has_inclusive_pcaches 1 +#define cpu_dcache_line_size() 16 +#define cpu_icache_line_size() 16 +#define cpu_scache_line_size() 32 +#endif /* CONFIG_CPU_R4X00 */ + +#endif /* __ASM_MACH_DEC_CPU_FEATURE_OVERRIDES_H */ diff --git a/arch/mips/include/asm/mach-generic/dma-coherence.h b/arch/mips/include/asm/mach-generic/dma-coherence.h index 74cb99257d5..a9e8f6b62b0 100644 --- a/arch/mips/include/asm/mach-generic/dma-coherence.h +++ b/arch/mips/include/asm/mach-generic/dma-coherence.h @@ -47,16 +47,6 @@ static inline int plat_dma_supported(struct device *dev, u64 mask) return 1; } -static inline void plat_extra_sync_for_device(struct device *dev) -{ -} - -static inline int plat_dma_mapping_error(struct device *dev, - dma_addr_t dma_addr) -{ - return 0; -} - static inline int plat_device_is_coherent(struct device *dev) { #ifdef CONFIG_DMA_COHERENT diff --git a/arch/mips/include/asm/mach-ip27/dma-coherence.h b/arch/mips/include/asm/mach-ip27/dma-coherence.h index 06c441968e6..4ffddfdb506 100644 --- a/arch/mips/include/asm/mach-ip27/dma-coherence.h +++ b/arch/mips/include/asm/mach-ip27/dma-coherence.h @@ -58,16 +58,6 @@ static inline int plat_dma_supported(struct device *dev, u64 mask) return 1; } -static inline void plat_extra_sync_for_device(struct device *dev) -{ -} - -static inline int plat_dma_mapping_error(struct device *dev, - dma_addr_t dma_addr) -{ - return 0; -} - static inline int plat_device_is_coherent(struct device *dev) { return 1; /* IP27 non-cohernet mode is unsupported */ diff --git a/arch/mips/include/asm/mach-ip32/dma-coherence.h b/arch/mips/include/asm/mach-ip32/dma-coherence.h index 073f0c4760b..104cfbc3ed6 100644 --- a/arch/mips/include/asm/mach-ip32/dma-coherence.h +++ b/arch/mips/include/asm/mach-ip32/dma-coherence.h @@ -80,17 +80,6 @@ static inline int plat_dma_supported(struct device *dev, u64 mask) return 1; } -static inline void plat_extra_sync_for_device(struct device *dev) -{ - return; -} - -static inline int plat_dma_mapping_error(struct device *dev, - dma_addr_t dma_addr) -{ - return 0; -} - static inline int plat_device_is_coherent(struct device *dev) { return 0; /* IP32 is non-cohernet */ diff --git a/arch/mips/include/asm/mach-jazz/dma-coherence.h b/arch/mips/include/asm/mach-jazz/dma-coherence.h index 9fc1e9ad703..949003ef97b 100644 --- a/arch/mips/include/asm/mach-jazz/dma-coherence.h +++ b/arch/mips/include/asm/mach-jazz/dma-coherence.h @@ -48,16 +48,6 @@ static inline int plat_dma_supported(struct device *dev, u64 mask) return 1; } -static inline void plat_extra_sync_for_device(struct device *dev) -{ -} - -static inline int plat_dma_mapping_error(struct device *dev, - dma_addr_t dma_addr) -{ - return 0; -} - static inline int plat_device_is_coherent(struct device *dev) { return 0; diff --git a/arch/mips/include/asm/mach-loongson/dma-coherence.h b/arch/mips/include/asm/mach-loongson/dma-coherence.h index e1433055fe9..aeb2c05d614 100644 --- a/arch/mips/include/asm/mach-loongson/dma-coherence.h +++ b/arch/mips/include/asm/mach-loongson/dma-coherence.h @@ -53,16 +53,6 @@ static inline int plat_dma_supported(struct device *dev, u64 mask) return 1; } -static inline void plat_extra_sync_for_device(struct device *dev) -{ -} - -static inline int plat_dma_mapping_error(struct device *dev, - dma_addr_t dma_addr) -{ - return 0; -} - static inline int plat_device_is_coherent(struct device *dev) { return 0; diff --git a/arch/mips/include/asm/mach-powertv/asic.h b/arch/mips/include/asm/mach-powertv/asic.h deleted file mode 100644 index b341108d12f..00000000000 --- a/arch/mips/include/asm/mach-powertv/asic.h +++ /dev/null @@ -1,120 +0,0 @@ -/* - * Copyright (C) 2009 Cisco Systems, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef _ASM_MACH_POWERTV_ASIC_H -#define _ASM_MACH_POWERTV_ASIC_H - -#include <linux/ioport.h> -#include <linux/platform_device.h> -#include <asm/mach-powertv/asic_regs.h> - -#define DVR_CAPABLE (1<<0) -#define PCIE_CAPABLE (1<<1) -#define FFS_CAPABLE (1<<2) -#define DISPLAY_CAPABLE (1<<3) - -/* Platform Family types - * For compitability, the new value must be added in the end */ -enum family_type { - FAMILY_8500, - FAMILY_8500RNG, - FAMILY_4500, - FAMILY_1500, - FAMILY_8600, - FAMILY_4600, - FAMILY_4600VZA, - FAMILY_8600VZB, - FAMILY_1500VZE, - FAMILY_1500VZF, - FAMILY_8700, - FAMILIES -}; - -/* Register maps for each ASIC */ -extern const struct register_map calliope_register_map; -extern const struct register_map cronus_register_map; -extern const struct register_map gaia_register_map; -extern const struct register_map zeus_register_map; - -extern struct resource dvr_cronus_resources[]; -extern struct resource dvr_gaia_resources[]; -extern struct resource dvr_zeus_resources[]; -extern struct resource non_dvr_calliope_resources[]; -extern struct resource non_dvr_cronus_resources[]; -extern struct resource non_dvr_cronuslite_resources[]; -extern struct resource non_dvr_gaia_resources[]; -extern struct resource non_dvr_vz_calliope_resources[]; -extern struct resource non_dvr_vze_calliope_resources[]; -extern struct resource non_dvr_vzf_calliope_resources[]; -extern struct resource non_dvr_zeus_resources[]; - -extern void powertv_platform_init(void); -extern void platform_alloc_bootmem(void); -extern enum asic_type platform_get_asic(void); -extern enum family_type platform_get_family(void); -extern int platform_supports_dvr(void); -extern int platform_supports_ffs(void); -extern int platform_supports_pcie(void); -extern int platform_supports_display(void); -extern void configure_platform(void); - -/* Platform Resources */ -#define ASIC_RESOURCE_GET_EXISTS 1 -extern struct resource *asic_resource_get(const char *name); -extern void platform_release_memory(void *baddr, int size); - -/* USB configuration */ -struct usb_hcd; /* Forward reference */ -extern void platform_configure_usb_ehci(void); -extern void platform_unconfigure_usb_ehci(void); -extern void platform_configure_usb_ohci(void); -extern void platform_unconfigure_usb_ohci(void); - -/* Resource for ASIC registers */ -extern struct resource asic_resource; -extern int platform_usb_devices_init(struct platform_device **echi_dev, - struct platform_device **ohci_dev); - -/* Reboot Cause */ -extern void set_reboot_cause(char code, unsigned int data, unsigned int data2); -extern void set_locked_reboot_cause(char code, unsigned int data, - unsigned int data2); - -enum sys_reboot_type { - sys_unknown_reboot = 0x00, /* Unknown reboot cause */ - sys_davic_change = 0x01, /* Reboot due to change in DAVIC - * mode */ - sys_user_reboot = 0x02, /* Reboot initiated by user */ - sys_system_reboot = 0x03, /* Reboot initiated by OS */ - sys_trap_reboot = 0x04, /* Reboot due to a CPU trap */ - sys_silent_reboot = 0x05, /* Silent reboot */ - sys_boot_ldr_reboot = 0x06, /* Bootloader reboot */ - sys_power_up_reboot = 0x07, /* Power on bootup. Older - * drivers may report as - * userReboot. */ - sys_code_change = 0x08, /* Reboot to take code change. - * Older drivers may report as - * userReboot. */ - sys_hardware_reset = 0x09, /* HW watchdog or front-panel - * reset button reset. Older - * drivers may report as - * userReboot. */ - sys_watchdogInterrupt = 0x0A /* Pre-watchdog interrupt */ -}; - -#endif /* _ASM_MACH_POWERTV_ASIC_H */ diff --git a/arch/mips/include/asm/mach-powertv/asic_reg_map.h b/arch/mips/include/asm/mach-powertv/asic_reg_map.h deleted file mode 100644 index 20348e817b0..00000000000 --- a/arch/mips/include/asm/mach-powertv/asic_reg_map.h +++ /dev/null @@ -1,90 +0,0 @@ -/* - * asic_reg_map.h - * - * A macro-enclosed list of the elements for the register_map structure for - * use in defining and manipulating the structure. - * - * Copyright (C) 2009 Cisco Systems, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -REGISTER_MAP_ELEMENT(eic_slow0_strt_add) -REGISTER_MAP_ELEMENT(eic_cfg_bits) -REGISTER_MAP_ELEMENT(eic_ready_status) -REGISTER_MAP_ELEMENT(chipver3) -REGISTER_MAP_ELEMENT(chipver2) -REGISTER_MAP_ELEMENT(chipver1) -REGISTER_MAP_ELEMENT(chipver0) -REGISTER_MAP_ELEMENT(uart1_intstat) -REGISTER_MAP_ELEMENT(uart1_inten) -REGISTER_MAP_ELEMENT(uart1_config1) -REGISTER_MAP_ELEMENT(uart1_config2) -REGISTER_MAP_ELEMENT(uart1_divisorhi) -REGISTER_MAP_ELEMENT(uart1_divisorlo) -REGISTER_MAP_ELEMENT(uart1_data) -REGISTER_MAP_ELEMENT(uart1_status) -REGISTER_MAP_ELEMENT(int_stat_3) -REGISTER_MAP_ELEMENT(int_stat_2) -REGISTER_MAP_ELEMENT(int_stat_1) -REGISTER_MAP_ELEMENT(int_stat_0) -REGISTER_MAP_ELEMENT(int_config) -REGISTER_MAP_ELEMENT(int_int_scan) -REGISTER_MAP_ELEMENT(ien_int_3) -REGISTER_MAP_ELEMENT(ien_int_2) -REGISTER_MAP_ELEMENT(ien_int_1) -REGISTER_MAP_ELEMENT(ien_int_0) -REGISTER_MAP_ELEMENT(int_level_3_3) -REGISTER_MAP_ELEMENT(int_level_3_2) -REGISTER_MAP_ELEMENT(int_level_3_1) -REGISTER_MAP_ELEMENT(int_level_3_0) -REGISTER_MAP_ELEMENT(int_level_2_3) -REGISTER_MAP_ELEMENT(int_level_2_2) -REGISTER_MAP_ELEMENT(int_level_2_1) -REGISTER_MAP_ELEMENT(int_level_2_0) -REGISTER_MAP_ELEMENT(int_level_1_3) -REGISTER_MAP_ELEMENT(int_level_1_2) -REGISTER_MAP_ELEMENT(int_level_1_1) -REGISTER_MAP_ELEMENT(int_level_1_0) -REGISTER_MAP_ELEMENT(int_level_0_3) -REGISTER_MAP_ELEMENT(int_level_0_2) -REGISTER_MAP_ELEMENT(int_level_0_1) -REGISTER_MAP_ELEMENT(int_level_0_0) -REGISTER_MAP_ELEMENT(int_docsis_en) -REGISTER_MAP_ELEMENT(mips_pll_setup) -REGISTER_MAP_ELEMENT(fs432x4b4_usb_ctl) -REGISTER_MAP_ELEMENT(test_bus) -REGISTER_MAP_ELEMENT(crt_spare) -REGISTER_MAP_ELEMENT(usb2_ohci_int_mask) -REGISTER_MAP_ELEMENT(usb2_strap) -REGISTER_MAP_ELEMENT(ehci_hcapbase) -REGISTER_MAP_ELEMENT(ohci_hc_revision) -REGISTER_MAP_ELEMENT(bcm1_bs_lmi_steer) -REGISTER_MAP_ELEMENT(usb2_control) -REGISTER_MAP_ELEMENT(usb2_stbus_obc) -REGISTER_MAP_ELEMENT(usb2_stbus_mess_size) -REGISTER_MAP_ELEMENT(usb2_stbus_chunk_size) -REGISTER_MAP_ELEMENT(pcie_regs) -REGISTER_MAP_ELEMENT(tim_ch) -REGISTER_MAP_ELEMENT(tim_cl) -REGISTER_MAP_ELEMENT(gpio_dout) -REGISTER_MAP_ELEMENT(gpio_din) -REGISTER_MAP_ELEMENT(gpio_dir) -REGISTER_MAP_ELEMENT(watchdog) -REGISTER_MAP_ELEMENT(front_panel) -REGISTER_MAP_ELEMENT(misc_clk_ctl1) -REGISTER_MAP_ELEMENT(misc_clk_ctl2) -REGISTER_MAP_ELEMENT(crt_ext_ctl) -REGISTER_MAP_ELEMENT(register_maps) diff --git a/arch/mips/include/asm/mach-powertv/asic_regs.h b/arch/mips/include/asm/mach-powertv/asic_regs.h deleted file mode 100644 index 06712abb3e5..00000000000 --- a/arch/mips/include/asm/mach-powertv/asic_regs.h +++ /dev/null @@ -1,125 +0,0 @@ -/* - * Copyright (C) 2009 Cisco Systems, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef __ASM_MACH_POWERTV_ASIC_H_ -#define __ASM_MACH_POWERTV_ASIC_H_ -#include <linux/io.h> - -/* ASIC types */ -enum asic_type { - ASIC_UNKNOWN, - ASIC_ZEUS, - ASIC_CALLIOPE, - ASIC_CRONUS, - ASIC_CRONUSLITE, - ASIC_GAIA, - ASICS /* Number of supported ASICs */ -}; - -/* hardcoded values read from Chip Version registers */ -#define CRONUS_10 0x0B4C1C20 -#define CRONUS_11 0x0B4C1C21 -#define CRONUSLITE_10 0x0B4C1C40 - -#define NAND_FLASH_BASE 0x03000000 -#define CALLIOPE_IO_BASE 0x08000000 -#define GAIA_IO_BASE 0x09000000 -#define CRONUS_IO_BASE 0x09000000 -#define ZEUS_IO_BASE 0x09000000 - -#define ASIC_IO_SIZE 0x01000000 - -/* Definitions for backward compatibility */ -#define UART1_INTSTAT uart1_intstat -#define UART1_INTEN uart1_inten -#define UART1_CONFIG1 uart1_config1 -#define UART1_CONFIG2 uart1_config2 -#define UART1_DIVISORHI uart1_divisorhi -#define UART1_DIVISORLO uart1_divisorlo -#define UART1_DATA uart1_data -#define UART1_STATUS uart1_status - -/* ASIC register enumeration */ -union register_map_entry { - unsigned long phys; - u32 *virt; -}; - -#define REGISTER_MAP_ELEMENT(x) union register_map_entry x; -struct register_map { -#include <asm/mach-powertv/asic_reg_map.h> -}; -#undef REGISTER_MAP_ELEMENT - -/** - * register_map_offset_phys - add an offset to the physical address - * @map: Pointer to the &struct register_map - * @offset: Value to add - * - * Only adds the base to non-zero physical addresses - */ -static inline void register_map_offset_phys(struct register_map *map, - unsigned long offset) -{ -#define REGISTER_MAP_ELEMENT(x) do { \ - if (map->x.phys != 0) \ - map->x.phys += offset; \ - } while (false); - -#include <asm/mach-powertv/asic_reg_map.h> -#undef REGISTER_MAP_ELEMENT -} - -/** - * register_map_virtualize - Convert ®ister_map to virtual addresses - * @map: Pointer to ®ister_map to virtualize - */ -static inline void register_map_virtualize(struct register_map *map) -{ -#define REGISTER_MAP_ELEMENT(x) do { \ - map->x.virt = (!map->x.phys) ? NULL : \ - UNCAC_ADDR(phys_to_virt(map->x.phys)); \ - } while (false); - -#include <asm/mach-powertv/asic_reg_map.h> -#undef REGISTER_MAP_ELEMENT -} - -extern struct register_map _asic_register_map; -extern unsigned long asic_phy_base; - -/* - * Macros to interface to registers through their ioremapped address - * asic_reg_phys_addr Returns the physical address of the given register - * asic_reg_addr Returns the iomapped virtual address of the given - * register. - */ -#define asic_reg_addr(x) (_asic_register_map.x.virt) -#define asic_reg_phys_addr(x) (virt_to_phys((void *) CAC_ADDR( \ - (unsigned long) asic_reg_addr(x)))) - -/* - * The asic_reg macro is gone. It should be replaced by either asic_read or - * asic_write, as appropriate. - */ - -#define asic_read(x) readl(asic_reg_addr(x)) -#define asic_write(v, x) writel(v, asic_reg_addr(x)) - -extern void asic_irq_init(void); -#endif diff --git a/arch/mips/include/asm/mach-powertv/cpu-feature-overrides.h b/arch/mips/include/asm/mach-powertv/cpu-feature-overrides.h deleted file mode 100644 index 58c76ec32a1..00000000000 --- a/arch/mips/include/asm/mach-powertv/cpu-feature-overrides.h +++ /dev/null @@ -1,60 +0,0 @@ -/* - * Copyright (C) 2010 Cisco Systems, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef _ASM_MACH_POWERTV_CPU_FEATURE_OVERRIDES_H_ -#define _ASM_MACH_POWERTV_CPU_FEATURE_OVERRIDES_H_ -#define cpu_has_tlb 1 -#define cpu_has_4kex 1 -#define cpu_has_3k_cache 0 -#define cpu_has_4k_cache 1 -#define cpu_has_tx39_cache 0 -#define cpu_has_fpu 0 -#define cpu_has_counter 1 -#define cpu_has_watch 1 -#define cpu_has_divec 1 -#define cpu_has_vce 0 -#define cpu_has_cache_cdex_p 0 -#define cpu_has_cache_cdex_s 0 -#define cpu_has_mcheck 1 -#define cpu_has_ejtag 1 -#define cpu_has_llsc 1 -#define cpu_has_mips16 0 -#define cpu_has_mdmx 0 -#define cpu_has_mips3d 0 -#define cpu_has_smartmips 0 -#define cpu_has_vtag_icache 0 -#define cpu_has_dc_aliases 0 -#define cpu_has_ic_fills_f_dc 0 -#define cpu_has_mips32r1 0 -#define cpu_has_mips32r2 1 -#define cpu_has_mips64r1 0 -#define cpu_has_mips64r2 0 -#define cpu_has_dsp 0 -#define cpu_has_dsp2 0 -#define cpu_has_mipsmt 0 -#define cpu_has_userlocal 0 -#define cpu_has_nofpuex 0 -#define cpu_has_64bits 0 -#define cpu_has_64bit_zero_reg 0 -#define cpu_has_vint 1 -#define cpu_has_veic 1 -#define cpu_has_inclusive_pcaches 0 - -#define cpu_dcache_line_size() 32 -#define cpu_icache_line_size() 32 -#endif diff --git a/arch/mips/include/asm/mach-powertv/dma-coherence.h b/arch/mips/include/asm/mach-powertv/dma-coherence.h deleted file mode 100644 index f8316720a21..00000000000 --- a/arch/mips/include/asm/mach-powertv/dma-coherence.h +++ /dev/null @@ -1,117 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Version from mach-generic modified to support PowerTV port - * Portions Copyright (C) 2009 Cisco Systems, Inc. - * Copyright (C) 2006 Ralf Baechle <ralf@linux-mips.org> - * - */ - -#ifndef __ASM_MACH_POWERTV_DMA_COHERENCE_H -#define __ASM_MACH_POWERTV_DMA_COHERENCE_H - -#include <linux/sched.h> -#include <linux/device.h> -#include <asm/mach-powertv/asic.h> - -static inline bool is_kseg2(void *addr) -{ - return (unsigned long)addr >= KSEG2; -} - -static inline unsigned long virt_to_phys_from_pte(void *addr) -{ - pgd_t *pgd; - pud_t *pud; - pmd_t *pmd; - pte_t *ptep, pte; - - unsigned long virt_addr = (unsigned long)addr; - unsigned long phys_addr = 0UL; - - /* get the page global directory. */ - pgd = pgd_offset_k(virt_addr); - - if (!pgd_none(*pgd)) { - /* get the page upper directory */ - pud = pud_offset(pgd, virt_addr); - if (!pud_none(*pud)) { - /* get the page middle directory */ - pmd = pmd_offset(pud, virt_addr); - if (!pmd_none(*pmd)) { - /* get a pointer to the page table entry */ - ptep = pte_offset(pmd, virt_addr); - pte = *ptep; - /* check for a valid page */ - if (pte_present(pte)) { - /* get the physical address the page is - * referring to */ - phys_addr = (unsigned long) - page_to_phys(pte_page(pte)); - /* add the offset within the page */ - phys_addr |= (virt_addr & ~PAGE_MASK); - } - } - } - } - - return phys_addr; -} - -static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr, - size_t size) -{ - if (is_kseg2(addr)) - return phys_to_dma(virt_to_phys_from_pte(addr)); - else - return phys_to_dma(virt_to_phys(addr)); -} - -static inline dma_addr_t plat_map_dma_mem_page(struct device *dev, - struct page *page) -{ - return phys_to_dma(page_to_phys(page)); -} - -static inline unsigned long plat_dma_addr_to_phys(struct device *dev, - dma_addr_t dma_addr) -{ - return dma_to_phys(dma_addr); -} - -static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr, - size_t size, enum dma_data_direction direction) -{ -} - -static inline int plat_dma_supported(struct device *dev, u64 mask) -{ - /* - * we fall back to GFP_DMA when the mask isn't all 1s, - * so we can't guarantee allocations that must be - * within a tighter range than GFP_DMA.. - */ - if (mask < DMA_BIT_MASK(24)) - return 0; - - return 1; -} - -static inline void plat_extra_sync_for_device(struct device *dev) -{ -} - -static inline int plat_dma_mapping_error(struct device *dev, - dma_addr_t dma_addr) -{ - return 0; -} - -static inline int plat_device_is_coherent(struct device *dev) -{ - return 0; -} - -#endif /* __ASM_MACH_POWERTV_DMA_COHERENCE_H */ diff --git a/arch/mips/include/asm/mach-powertv/interrupts.h b/arch/mips/include/asm/mach-powertv/interrupts.h deleted file mode 100644 index 6c463be6215..00000000000 --- a/arch/mips/include/asm/mach-powertv/interrupts.h +++ /dev/null @@ -1,253 +0,0 @@ -/* - * Copyright (C) 2009 Cisco Systems, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef _ASM_MACH_POWERTV_INTERRUPTS_H_ -#define _ASM_MACH_POWERTV_INTERRUPTS_H_ - -/* - * Defines for all of the interrupt lines - */ - -/* Definitions for backward compatibility */ -#define kIrq_Uart1 irq_uart1 - -#define ibase 0 - -/*------------- Register: int_stat_3 */ -/* 126 unused (bit 31) */ -#define irq_asc2video (ibase+126) /* ASC 2 Video Interrupt */ -#define irq_asc1video (ibase+125) /* ASC 1 Video Interrupt */ -#define irq_comms_block_wd (ibase+124) /* ASC 1 Video Interrupt */ -#define irq_fdma_mailbox (ibase+123) /* FDMA Mailbox Output */ -#define irq_fdma_gp (ibase+122) /* FDMA GP Output */ -#define irq_mips_pic (ibase+121) /* MIPS Performance Counter - * Interrupt */ -#define irq_mips_timer (ibase+120) /* MIPS Timer Interrupt */ -#define irq_memory_protect (ibase+119) /* Memory Protection Interrupt - * -- Ored by glue logic inside - * SPARC ILC (see - * INT_MEM_PROT_STAT, below, - * for individual interrupts) - */ -/* 118 unused (bit 22) */ -#define irq_sbag (ibase+117) /* SBAG Interrupt -- Ored by - * glue logic inside SPARC ILC - * (see INT_SBAG_STAT, below, - * for individual interrupts) */ -#define irq_qam_b_fec (ibase+116) /* QAM B FEC Interrupt */ -#define irq_qam_a_fec (ibase+115) /* QAM A FEC Interrupt */ -/* 114 unused (bit 18) */ -#define irq_mailbox (ibase+113) /* Mailbox Debug Interrupt -- - * Ored by glue logic inside - * SPARC ILC (see - * INT_MAILBOX_STAT, below, for - * individual interrupts) */ -#define irq_fuse_stat1 (ibase+112) /* Fuse Status 1 */ -#define irq_fuse_stat2 (ibase+111) /* Fuse Status 2 */ -#define irq_fuse_stat3 (ibase+110) /* Blitter Interrupt / Fuse - * Status 3 */ -#define irq_blitter (ibase+110) /* Blitter Interrupt / Fuse - * Status 3 */ -#define irq_avc1_pp0 (ibase+109) /* AVC Decoder #1 PP0 - * Interrupt */ -#define irq_avc1_pp1 (ibase+108) /* AVC Decoder #1 PP1 - * Interrupt */ -#define irq_avc1_mbe (ibase+107) /* AVC Decoder #1 MBE - * Interrupt */ -#define irq_avc2_pp0 (ibase+106) /* AVC Decoder #2 PP0 - * Interrupt */ -#define irq_avc2_pp1 (ibase+105) /* AVC Decoder #2 PP1 - * Interrupt */ -#define irq_avc2_mbe (ibase+104) /* AVC Decoder #2 MBE - * Interrupt */ -#define irq_zbug_spi (ibase+103) /* Zbug SPI Slave Interrupt */ -#define irq_qam_mod2 (ibase+102) /* QAM Modulator 2 DMA - * Interrupt */ -#define irq_ir_rx (ibase+101) /* IR RX 2 Interrupt */ -#define irq_aud_dsp2 (ibase+100) /* Audio DSP #2 Interrupt */ -#define irq_aud_dsp1 (ibase+99) /* Audio DSP #1 Interrupt */ -#define irq_docsis (ibase+98) /* DOCSIS Debug Interrupt */ -#define irq_sd_dvp1 (ibase+97) /* SD DVP #1 Interrupt */ -#define irq_sd_dvp2 (ibase+96) /* SD DVP #2 Interrupt */ -/*------------- Register: int_stat_2 */ -#define irq_hd_dvp (ibase+95) /* HD DVP Interrupt */ -#define kIrq_Prewatchdog (ibase+94) /* watchdog Pre-Interrupt */ -#define irq_timer2 (ibase+93) /* Programmable Timer - * Interrupt 2 */ -#define irq_1394 (ibase+92) /* 1394 Firewire Interrupt */ -#define irq_usbohci (ibase+91) /* USB 2.0 OHCI Interrupt */ -#define irq_usbehci (ibase+90) /* USB 2.0 EHCI Interrupt */ -#define irq_pciexp (ibase+89) /* PCI Express 0 Interrupt */ -#define irq_pciexp0 (ibase+89) /* PCI Express 0 Interrupt */ -#define irq_afe1 (ibase+88) /* AFE 1 Interrupt */ -#define irq_sata (ibase+87) /* SATA 1 Interrupt */ -#define irq_sata1 (ibase+87) /* SATA 1 Interrupt */ -#define irq_dtcp (ibase+86) /* DTCP Interrupt */ -#define irq_pciexp1 (ibase+85) /* PCI Express 1 Interrupt */ -/* 84 unused (bit 20) */ -/* 83 unused (bit 19) */ -/* 82 unused (bit 18) */ -#define irq_sata2 (ibase+81) /* SATA2 Interrupt */ -#define irq_uart2 (ibase+80) /* UART2 Interrupt */ -#define irq_legacy_usb (ibase+79) /* Legacy USB Host ISR (1.1 - * Host module) */ -#define irq_pod (ibase+78) /* POD Interrupt */ -#define irq_slave_usb (ibase+77) /* Slave USB */ -#define irq_denc1 (ibase+76) /* DENC #1 VTG Interrupt */ -#define irq_vbi_vtg (ibase+75) /* VBI VTG Interrupt */ -#define irq_afe2 (ibase+74) /* AFE 2 Interrupt */ -#define irq_denc2 (ibase+73) /* DENC #2 VTG Interrupt */ -#define irq_asc2 (ibase+72) /* ASC #2 Interrupt */ -#define irq_asc1 (ibase+71) /* ASC #1 Interrupt */ -#define irq_mod_dma (ibase+70) /* Modulator DMA Interrupt */ -#define irq_byte_eng1 (ibase+69) /* Byte Engine Interrupt [1] */ -#define irq_byte_eng0 (ibase+68) /* Byte Engine Interrupt [0] */ -/* 67 unused (bit 03) */ -/* 66 unused (bit 02) */ -/* 65 unused (bit 01) */ -/* 64 unused (bit 00) */ -/*------------- Register: int_stat_1 */ -/* 63 unused (bit 31) */ -/* 62 unused (bit 30) */ -/* 61 unused (bit 29) */ -/* 60 unused (bit 28) */ -/* 59 unused (bit 27) */ -/* 58 unused (bit 26) */ -/* 57 unused (bit 25) */ -/* 56 unused (bit 24) */ -#define irq_buf_dma_mem2mem (ibase+55) /* BufDMA Memory to Memory - * Interrupt */ -#define irq_buf_dma_usbtransmit (ibase+54) /* BufDMA USB Transmit - * Interrupt */ -#define irq_buf_dma_qpskpodtransmit (ibase+53) /* BufDMA QPSK/POD Tramsit - * Interrupt */ -#define irq_buf_dma_transmit_error (ibase+52) /* BufDMA Transmit Error - * Interrupt */ -#define irq_buf_dma_usbrecv (ibase+51) /* BufDMA USB Receive - * Interrupt */ -#define irq_buf_dma_qpskpodrecv (ibase+50) /* BufDMA QPSK/POD Receive - * Interrupt */ -#define irq_buf_dma_recv_error (ibase+49) /* BufDMA Receive Error - * Interrupt */ -#define irq_qamdma_transmit_play (ibase+48) /* QAMDMA Transmit/Play - * Interrupt */ -#define irq_qamdma_transmit_error (ibase+47) /* QAMDMA Transmit Error - * Interrupt */ -#define irq_qamdma_recv2high (ibase+46) /* QAMDMA Receive 2 High - * (Chans 63-32) */ -#define irq_qamdma_recv2low (ibase+45) /* QAMDMA Receive 2 Low - * (Chans 31-0) */ -#define irq_qamdma_recv1high (ibase+44) /* QAMDMA Receive 1 High - * (Chans 63-32) */ -#define irq_qamdma_recv1low (ibase+43) /* QAMDMA Receive 1 Low - * (Chans 31-0) */ -#define irq_qamdma_recv_error (ibase+42) /* QAMDMA Receive Error - * Interrupt */ -#define irq_mpegsplice (ibase+41) /* MPEG Splice Interrupt */ -#define irq_deinterlace_rdy (ibase+40) /* Deinterlacer Frame Ready - * Interrupt */ -#define irq_ext_in0 (ibase+39) /* External Interrupt irq_in0 */ -#define irq_gpio3 (ibase+38) /* GP I/O IRQ 3 - From GP I/O - * Module */ -#define irq_gpio2 (ibase+37) /* GP I/O IRQ 2 - From GP I/O - * Module (ABE_intN) */ -#define irq_pcrcmplt1 (ibase+36) /* PCR Capture Complete or - * Discontinuity 1 */ -#define irq_pcrcmplt2 (ibase+35) /* PCR Capture Complete or - * Discontinuity 2 */ -#define irq_parse_peierr (ibase+34) /* PID Parser Error Detect - * (PEI) */ -#define irq_parse_cont_err (ibase+33) /* PID Parser continuity error - * detect */ -#define irq_ds1framer (ibase+32) /* DS1 Framer Interrupt */ -/*------------- Register: int_stat_0 */ -#define irq_gpio1 (ibase+31) /* GP I/O IRQ 1 - From GP I/O - * Module */ -#define irq_gpio0 (ibase+30) /* GP I/O IRQ 0 - From GP I/O - * Module */ -#define irq_qpsk_out_aloha (ibase+29) /* QPSK Output Slotted Aloha - * (chan 3) Transmission - * Completed OK */ -#define irq_qpsk_out_tdma (ibase+28) /* QPSK Output TDMA (chan 2) - * Transmission Completed OK */ -#define irq_qpsk_out_reserve (ibase+27) /* QPSK Output Reservation - * (chan 1) Transmission - * Completed OK */ -#define irq_qpsk_out_aloha_err (ibase+26) /* QPSK Output Slotted Aloha - * (chan 3)Transmission - * completed with Errors. */ -#define irq_qpsk_out_tdma_err (ibase+25) /* QPSK Output TDMA (chan 2) - * Transmission completed with - * Errors. */ -#define irq_qpsk_out_rsrv_err (ibase+24) /* QPSK Output Reservation - * (chan 1) Transmission - * completed with Errors */ -#define irq_aloha_fail (ibase+23) /* Unsuccessful Resend of Aloha - * for N times. Aloha retry - * timeout for channel 3. */ -#define irq_timer1 (ibase+22) /* Programmable Timer - * Interrupt */ -#define irq_keyboard (ibase+21) /* Keyboard Module Interrupt */ -#define irq_i2c (ibase+20) /* I2C Module Interrupt */ -#define irq_spi (ibase+19) /* SPI Module Interrupt */ -#define irq_irblaster (ibase+18) /* IR Blaster Interrupt */ -#define irq_splice_detect (ibase+17) /* PID Key Change Interrupt or - * Splice Detect Interrupt */ -#define irq_se_micro (ibase+16) /* Secure Micro I/F Module - * Interrupt */ -#define irq_uart1 (ibase+15) /* UART Interrupt */ -#define irq_irrecv (ibase+14) /* IR Receiver Interrupt */ -#define irq_host_int1 (ibase+13) /* Host-to-Host Interrupt 1 */ -#define irq_host_int0 (ibase+12) /* Host-to-Host Interrupt 0 */ -#define irq_qpsk_hecerr (ibase+11) /* QPSK HEC Error Interrupt */ -#define irq_qpsk_crcerr (ibase+10) /* QPSK AAL-5 CRC Error - * Interrupt */ -/* 9 unused (bit 09) */ -/* 8 unused (bit 08) */ -#define irq_psicrcerr (ibase+7) /* QAM PSI CRC Error - * Interrupt */ -#define irq_psilength_err (ibase+6) /* QAM PSI Length Error - * Interrupt */ -#define irq_esfforward (ibase+5) /* ESF Interrupt Mark From - * Forward Path Reference - - * every 3ms when forward Mbits - * and forward slot control - * bytes are updated. */ -#define irq_esfreverse (ibase+4) /* ESF Interrupt Mark from - * Reverse Path Reference - - * delayed from forward mark by - * the ranging delay plus a - * fixed amount. When reverse - * Mbits and reverse slot - * control bytes are updated. - * Occurs every 3ms for 3.0M and - * 1.554 M upstream rates and - * every 6 ms for 256K upstream - * rate. */ -#define irq_aloha_timeout (ibase+3) /* Slotted-Aloha timeout on - * Channel 1. */ -#define irq_reservation (ibase+2) /* Partial (or Incremental) - * Reservation Message Completed - * or Slotted aloha verify for - * channel 1. */ -#define irq_aloha3 (ibase+1) /* Slotted-Aloha Message Verify - * Interrupt or Reservation - * increment completed for - * channel 3. */ -#define irq_mpeg_d (ibase+0) /* MPEG Decoder Interrupt */ -#endif /* _ASM_MACH_POWERTV_INTERRUPTS_H_ */ diff --git a/arch/mips/include/asm/mach-powertv/ioremap.h b/arch/mips/include/asm/mach-powertv/ioremap.h deleted file mode 100644 index c86ef094ec3..00000000000 --- a/arch/mips/include/asm/mach-powertv/ioremap.h +++ /dev/null @@ -1,167 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * Portions Copyright (C) Cisco Systems, Inc. - */ -#ifndef __ASM_MACH_POWERTV_IOREMAP_H -#define __ASM_MACH_POWERTV_IOREMAP_H - -#include <linux/types.h> -#include <linux/log2.h> -#include <linux/compiler.h> - -#include <asm/pgtable-bits.h> -#include <asm/addrspace.h> - -/* We're going to mess with bits, so get sizes */ -#define IOR_BPC 8 /* Bits per char */ -#define IOR_PHYS_BITS (IOR_BPC * sizeof(phys_addr_t)) -#define IOR_DMA_BITS (IOR_BPC * sizeof(dma_addr_t)) - -/* - * Define the granularity of physical/DMA mapping in terms of the number - * of bits that defines the offset within a grain. These will be the - * least significant bits of the address. The rest of a physical or DMA - * address will be used to index into an appropriate table to find the - * offset to add to the address to yield the corresponding DMA or physical - * address, respectively. - */ -#define IOR_LSBITS 22 /* Bits in a grain */ - -/* - * Compute the number of most significant address bits after removing those - * used for the offset within a grain and then compute the number of table - * entries for the conversion. - */ -#define IOR_PHYS_MSBITS (IOR_PHYS_BITS - IOR_LSBITS) -#define IOR_NUM_PHYS_TO_DMA ((phys_addr_t) 1 << IOR_PHYS_MSBITS) - -#define IOR_DMA_MSBITS (IOR_DMA_BITS - IOR_LSBITS) -#define IOR_NUM_DMA_TO_PHYS ((dma_addr_t) 1 << IOR_DMA_MSBITS) - -/* - * Define data structures used as elements in the arrays for the conversion - * between physical and DMA addresses. We do some slightly fancy math to - * compute the width of the offset element of the conversion tables so - * that we can have the smallest conversion tables. Next, round up the - * sizes to the next higher power of two, i.e. the offset element will have - * 8, 16, 32, 64, etc. bits. This eliminates the need to mask off any - * bits. Finally, we compute a shift value that puts the most significant - * bits of the offset into the most significant bits of the offset element. - * This makes it more efficient on processors without barrel shifters and - * easier to see the values if the conversion table is dumped in binary. - */ -#define _IOR_OFFSET_WIDTH(n) (1 << order_base_2(n)) -#define IOR_OFFSET_WIDTH(n) \ - (_IOR_OFFSET_WIDTH(n) < 8 ? 8 : _IOR_OFFSET_WIDTH(n)) - -#define IOR_PHYS_OFFSET_BITS IOR_OFFSET_WIDTH(IOR_PHYS_MSBITS) -#define IOR_PHYS_SHIFT (IOR_PHYS_BITS - IOR_PHYS_OFFSET_BITS) - -#define IOR_DMA_OFFSET_BITS IOR_OFFSET_WIDTH(IOR_DMA_MSBITS) -#define IOR_DMA_SHIFT (IOR_DMA_BITS - IOR_DMA_OFFSET_BITS) - -struct ior_phys_to_dma { - dma_addr_t offset:IOR_DMA_OFFSET_BITS __packed - __aligned((IOR_DMA_OFFSET_BITS / IOR_BPC)); -}; - -struct ior_dma_to_phys { - dma_addr_t offset:IOR_PHYS_OFFSET_BITS __packed - __aligned((IOR_PHYS_OFFSET_BITS / IOR_BPC)); -}; - -extern struct ior_phys_to_dma _ior_phys_to_dma[IOR_NUM_PHYS_TO_DMA]; -extern struct ior_dma_to_phys _ior_dma_to_phys[IOR_NUM_DMA_TO_PHYS]; - -static inline dma_addr_t _phys_to_dma_offset_raw(phys_addr_t phys) -{ - return (dma_addr_t)_ior_phys_to_dma[phys >> IOR_LSBITS].offset; -} - -static inline dma_addr_t _dma_to_phys_offset_raw(dma_addr_t dma) -{ - return (dma_addr_t)_ior_dma_to_phys[dma >> IOR_LSBITS].offset; -} - -/* These are not portable and should not be used in drivers. Drivers should - * be using ioremap() and friends to map physical addresses to virtual - * addresses and dma_map*() and friends to map virtual addresses into DMA - * addresses and back. - */ -static inline dma_addr_t phys_to_dma(phys_addr_t phys) -{ - return phys + (_phys_to_dma_offset_raw(phys) << IOR_PHYS_SHIFT); -} - -static inline phys_addr_t dma_to_phys(dma_addr_t dma) -{ - return dma + (_dma_to_phys_offset_raw(dma) << IOR_DMA_SHIFT); -} - -extern void ioremap_add_map(dma_addr_t phys, phys_addr_t alias, - dma_addr_t size); - -/* - * Allow physical addresses to be fixed up to help peripherals located - * outside the low 32-bit range -- generic pass-through version. - */ -static inline phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size) -{ - return phys_addr; -} - -/* - * Handle the special case of addresses the area aliased into the first - * 512 MiB of the processor's physical address space. These turn into either - * kseg0 or kseg1 addresses, depending on flags. - */ -static inline void __iomem *plat_ioremap(phys_t start, unsigned long size, - unsigned long flags) -{ - phys_addr_t start_offset; - void __iomem *result = NULL; - - /* Start by checking to see whether this is an aliased address */ - start_offset = _dma_to_phys_offset_raw(start); - - /* - * If: - * o the memory is aliased into the first 512 MiB, and - * o the start and end are in the same RAM bank, and - * o we don't have a zero size or wrap around, and - * o we are supposed to create an uncached mapping, - * handle this is a kseg0 or kseg1 address - */ - if (start_offset != 0) { - phys_addr_t last; - dma_addr_t dma_to_phys_offset; - - last = start + size - 1; - dma_to_phys_offset = - _dma_to_phys_offset_raw(last) << IOR_DMA_SHIFT; - - if (dma_to_phys_offset == start_offset && - size != 0 && start <= last) { - phys_t adjusted_start; - adjusted_start = start + start_offset; - if (flags == _CACHE_UNCACHED) - result = (void __iomem *) (unsigned long) - CKSEG1ADDR(adjusted_start); - else - result = (void __iomem *) (unsigned long) - CKSEG0ADDR(adjusted_start); - } - } - - return result; -} - -static inline int plat_iounmap(const volatile void __iomem *addr) -{ - return 0; -} -#endif /* __ASM_MACH_POWERTV_IOREMAP_H */ diff --git a/arch/mips/include/asm/mach-powertv/war.h b/arch/mips/include/asm/mach-powertv/war.h deleted file mode 100644 index c5651c8e58d..00000000000 --- a/arch/mips/include/asm/mach-powertv/war.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * This version for the PowerTV platform copied from the Malta version. - * - * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org> - * Portions copyright (C) 2009 Cisco Systems, Inc. - */ -#ifndef __ASM_MACH_POWERTV_WAR_H -#define __ASM_MACH_POWERTV_WAR_H - -#define R4600_V1_INDEX_ICACHEOP_WAR 0 -#define R4600_V1_HIT_CACHEOP_WAR 0 -#define R4600_V2_HIT_CACHEOP_WAR 0 -#define R5432_CP0_INTERRUPT_WAR 0 -#define BCM1250_M3_WAR 0 -#define SIBYTE_1956_WAR 0 -#define MIPS4K_ICACHE_REFILL_WAR 1 -#define MIPS_CACHE_SYNC_WAR 1 -#define TX49XX_ICACHE_INDEX_INV_WAR 0 -#define ICACHE_REFILLS_WORKAROUND_WAR 1 -#define R10000_LLSC_WAR 0 -#define MIPS34K_MISSED_ITLB_WAR 0 - -#endif /* __ASM_MACH_POWERTV_WAR_H */ diff --git a/arch/mips/include/asm/mips-boards/piix4.h b/arch/mips/include/asm/mips-boards/piix4.h index a02596cf1ab..e3322799871 100644 --- a/arch/mips/include/asm/mips-boards/piix4.h +++ b/arch/mips/include/asm/mips-boards/piix4.h @@ -1,6 +1,7 @@ /* * Carsten Langgaard, carstenl@mips.com * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. + * Copyright (C) 2013 Imagination Technologies Ltd. * * This program is free software; you can distribute it and/or modify it * under the terms of the GNU General Public License (Version 2) as @@ -20,61 +21,26 @@ #ifndef __ASM_MIPS_BOARDS_PIIX4_H #define __ASM_MIPS_BOARDS_PIIX4_H -/************************************************************************ - * IO register offsets - ************************************************************************/ -#define PIIX4_ICTLR1_ICW1 0x20 -#define PIIX4_ICTLR1_ICW2 0x21 -#define PIIX4_ICTLR1_ICW3 0x21 -#define PIIX4_ICTLR1_ICW4 0x21 -#define PIIX4_ICTLR2_ICW1 0xa0 -#define PIIX4_ICTLR2_ICW2 0xa1 -#define PIIX4_ICTLR2_ICW3 0xa1 -#define PIIX4_ICTLR2_ICW4 0xa1 -#define PIIX4_ICTLR1_OCW1 0x21 -#define PIIX4_ICTLR1_OCW2 0x20 -#define PIIX4_ICTLR1_OCW3 0x20 -#define PIIX4_ICTLR1_OCW4 0x20 -#define PIIX4_ICTLR2_OCW1 0xa1 -#define PIIX4_ICTLR2_OCW2 0xa0 -#define PIIX4_ICTLR2_OCW3 0xa0 -#define PIIX4_ICTLR2_OCW4 0xa0 - - -/************************************************************************ - * Register encodings. - ************************************************************************/ -#define PIIX4_OCW2_NSEOI (0x1 << 5) -#define PIIX4_OCW2_SEOI (0x3 << 5) -#define PIIX4_OCW2_RNSEOI (0x5 << 5) -#define PIIX4_OCW2_RAEOIS (0x4 << 5) -#define PIIX4_OCW2_RAEOIC (0x0 << 5) -#define PIIX4_OCW2_RSEOI (0x7 << 5) -#define PIIX4_OCW2_SP (0x6 << 5) -#define PIIX4_OCW2_NOP (0x2 << 5) - -#define PIIX4_OCW2_SEL (0x0 << 3) - -#define PIIX4_OCW2_ILS_0 0 -#define PIIX4_OCW2_ILS_1 1 -#define PIIX4_OCW2_ILS_2 2 -#define PIIX4_OCW2_ILS_3 3 -#define PIIX4_OCW2_ILS_4 4 -#define PIIX4_OCW2_ILS_5 5 -#define PIIX4_OCW2_ILS_6 6 -#define PIIX4_OCW2_ILS_7 7 -#define PIIX4_OCW2_ILS_8 0 -#define PIIX4_OCW2_ILS_9 1 -#define PIIX4_OCW2_ILS_10 2 -#define PIIX4_OCW2_ILS_11 3 -#define PIIX4_OCW2_ILS_12 4 -#define PIIX4_OCW2_ILS_13 5 -#define PIIX4_OCW2_ILS_14 6 -#define PIIX4_OCW2_ILS_15 7 - -#define PIIX4_OCW3_SEL (0x1 << 3) - -#define PIIX4_OCW3_IRR 0x2 -#define PIIX4_OCW3_ISR 0x3 +/* PIRQX Route Control */ +#define PIIX4_FUNC0_PIRQRC 0x60 +#define PIIX4_FUNC0_PIRQRC_IRQ_ROUTING_DISABLE (1 << 7) +#define PIIX4_FUNC0_PIRQRC_IRQ_ROUTING_MASK 0xf +#define PIIX4_FUNC0_PIRQRC_IRQ_ROUTING_MAX 16 +/* Top Of Memory */ +#define PIIX4_FUNC0_TOM 0x69 +#define PIIX4_FUNC0_TOM_TOP_OF_MEMORY_MASK 0xf0 +/* Deterministic Latency Control */ +#define PIIX4_FUNC0_DLC 0x82 +#define PIIX4_FUNC0_DLC_USBPR_EN (1 << 2) +#define PIIX4_FUNC0_DLC_PASSIVE_RELEASE_EN (1 << 1) +#define PIIX4_FUNC0_DLC_DELAYED_TRANSACTION_EN (1 << 0) + +/* IDE Timing */ +#define PIIX4_FUNC1_IDETIM_PRIMARY_LO 0x40 +#define PIIX4_FUNC1_IDETIM_PRIMARY_HI 0x41 +#define PIIX4_FUNC1_IDETIM_PRIMARY_HI_IDE_DECODE_EN (1 << 7) +#define PIIX4_FUNC1_IDETIM_SECONDARY_LO 0x42 +#define PIIX4_FUNC1_IDETIM_SECONDARY_HI 0x43 +#define PIIX4_FUNC1_IDETIM_SECONDARY_HI_IDE_DECODE_EN (1 << 7) #endif /* __ASM_MIPS_BOARDS_PIIX4_H */ diff --git a/arch/mips/include/asm/mmu_context.h b/arch/mips/include/asm/mmu_context.h index 3b29079b542..e277bbad287 100644 --- a/arch/mips/include/asm/mmu_context.h +++ b/arch/mips/include/asm/mmu_context.h @@ -24,21 +24,21 @@ #endif /* SMTC */ #include <asm-generic/mm_hooks.h> -#ifdef CONFIG_MIPS_PGD_C0_CONTEXT - #define TLBMISS_HANDLER_SETUP_PGD(pgd) \ do { \ extern void tlbmiss_handler_setup_pgd(unsigned long); \ tlbmiss_handler_setup_pgd((unsigned long)(pgd)); \ } while (0) +#ifdef CONFIG_MIPS_PGD_C0_CONTEXT #define TLBMISS_HANDLER_SETUP() \ do { \ TLBMISS_HANDLER_SETUP_PGD(swapper_pg_dir); \ - write_c0_xcontext((unsigned long) smp_processor_id() << 51); \ + write_c0_xcontext((unsigned long) smp_processor_id() << \ + SMP_CPUID_REGSHIFT); \ } while (0) -#else /* CONFIG_MIPS_PGD_C0_CONTEXT: using pgd_current*/ +#else /* !CONFIG_MIPS_PGD_C0_CONTEXT: using pgd_current*/ /* * For the fast tlb miss handlers, we keep a per cpu array of pointers @@ -47,21 +47,11 @@ do { \ */ extern unsigned long pgd_current[]; -#define TLBMISS_HANDLER_SETUP_PGD(pgd) \ - pgd_current[smp_processor_id()] = (unsigned long)(pgd) - -#ifdef CONFIG_32BIT #define TLBMISS_HANDLER_SETUP() \ - write_c0_context((unsigned long) smp_processor_id() << 25); \ + write_c0_context((unsigned long) smp_processor_id() << \ + SMP_CPUID_REGSHIFT); \ back_to_back_c0_hazard(); \ TLBMISS_HANDLER_SETUP_PGD(swapper_pg_dir) -#endif -#ifdef CONFIG_64BIT -#define TLBMISS_HANDLER_SETUP() \ - write_c0_context((unsigned long) smp_processor_id() << 26); \ - back_to_back_c0_hazard(); \ - TLBMISS_HANDLER_SETUP_PGD(swapper_pg_dir) -#endif #endif /* CONFIG_MIPS_PGD_C0_CONTEXT*/ #if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX) diff --git a/arch/mips/include/asm/ptrace.h b/arch/mips/include/asm/ptrace.h index 5e6cd094739..7bba9da110a 100644 --- a/arch/mips/include/asm/ptrace.h +++ b/arch/mips/include/asm/ptrace.h @@ -81,7 +81,6 @@ static inline long regs_return_value(struct pt_regs *regs) #define instruction_pointer(regs) ((regs)->cp0_epc) #define profile_pc(regs) instruction_pointer(regs) -#define user_stack_pointer(r) ((r)->regs[29]) extern asmlinkage void syscall_trace_enter(struct pt_regs *regs); extern asmlinkage void syscall_trace_leave(struct pt_regs *regs); @@ -100,4 +99,17 @@ static inline void die_if_kernel(const char *str, struct pt_regs *regs) (struct pt_regs *)((sp | (THREAD_SIZE - 1)) + 1 - 32) - 1; \ }) +/* Helpers for working with the user stack pointer */ + +static inline unsigned long user_stack_pointer(struct pt_regs *regs) +{ + return regs->regs[29]; +} + +static inline void user_stack_pointer_set(struct pt_regs *regs, + unsigned long val) +{ + regs->regs[29] = val; +} + #endif /* _ASM_PTRACE_H */ diff --git a/arch/mips/include/asm/r4kcache.h b/arch/mips/include/asm/r4kcache.h index a0b2650516a..34d1a191712 100644 --- a/arch/mips/include/asm/r4kcache.h +++ b/arch/mips/include/asm/r4kcache.h @@ -15,6 +15,7 @@ #include <asm/asm.h> #include <asm/cacheops.h> #include <asm/cpu-features.h> +#include <asm/cpu-type.h> #include <asm/mipsmtregs.h> /* @@ -162,7 +163,15 @@ static inline void flush_scache_line_indexed(unsigned long addr) static inline void flush_icache_line(unsigned long addr) { __iflush_prologue - cache_op(Hit_Invalidate_I, addr); + switch (boot_cpu_type()) { + case CPU_LOONGSON2: + cache_op(Hit_Invalidate_I_Loongson23, addr); + break; + + default: + cache_op(Hit_Invalidate_I, addr); + break; + } __iflush_epilogue } @@ -208,7 +217,15 @@ static inline void flush_scache_line(unsigned long addr) */ static inline void protected_flush_icache_line(unsigned long addr) { - protected_cache_op(Hit_Invalidate_I, addr); + switch (boot_cpu_type()) { + case CPU_LOONGSON2: + protected_cache_op(Hit_Invalidate_I_Loongson23, addr); + break; + + default: + protected_cache_op(Hit_Invalidate_I, addr); + break; + } } /* @@ -412,8 +429,8 @@ __BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64 __BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128) /* build blast_xxx_range, protected_blast_xxx_range */ -#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot) \ -static inline void prot##blast_##pfx##cache##_range(unsigned long start, \ +#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot, extra) \ +static inline void prot##extra##blast_##pfx##cache##_range(unsigned long start, \ unsigned long end) \ { \ unsigned long lsize = cpu_##desc##_line_size(); \ @@ -432,13 +449,15 @@ static inline void prot##blast_##pfx##cache##_range(unsigned long start, \ __##pfx##flush_epilogue \ } -__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_) -__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_) -__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_) -__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, ) -__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, ) +__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_, ) +__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_, ) +__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_, ) +__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I_Loongson23, \ + protected_, loongson23_) +__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, , ) +__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, , ) /* blast_inv_dcache_range */ -__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D, ) -__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD, ) +__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D, , ) +__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD, , ) #endif /* _ASM_R4KCACHE_H */ diff --git a/arch/mips/include/asm/setup.h b/arch/mips/include/asm/setup.h index e26589ef36e..d7bfdeba9e8 100644 --- a/arch/mips/include/asm/setup.h +++ b/arch/mips/include/asm/setup.h @@ -5,6 +5,14 @@ extern void setup_early_printk(void); +#ifdef CONFIG_EARLY_PRINTK_8250 +extern void setup_8250_early_printk_port(unsigned long base, + unsigned int reg_shift, unsigned int timeout); +#else +static inline void setup_8250_early_printk_port(unsigned long base, + unsigned int reg_shift, unsigned int timeout) {} +#endif + extern void set_handler(unsigned long offset, void *addr, unsigned long len); extern void set_uncached_handler(unsigned long offset, void *addr, unsigned long len); diff --git a/arch/mips/include/asm/stackframe.h b/arch/mips/include/asm/stackframe.h index 23fc95e6567..4857e2c8df5 100644 --- a/arch/mips/include/asm/stackframe.h +++ b/arch/mips/include/asm/stackframe.h @@ -17,6 +17,7 @@ #include <asm/asmmacro.h> #include <asm/mipsregs.h> #include <asm/asm-offsets.h> +#include <asm/thread_info.h> /* * For SMTC kernel, global IE should be left set, and interrupts @@ -93,21 +94,8 @@ .endm #ifdef CONFIG_SMP -#ifdef CONFIG_MIPS_MT_SMTC -#define PTEBASE_SHIFT 19 /* TCBIND */ -#define CPU_ID_REG CP0_TCBIND -#define CPU_ID_MFC0 mfc0 -#elif defined(CONFIG_MIPS_PGD_C0_CONTEXT) -#define PTEBASE_SHIFT 48 /* XCONTEXT */ -#define CPU_ID_REG CP0_XCONTEXT -#define CPU_ID_MFC0 MFC0 -#else -#define PTEBASE_SHIFT 23 /* CONTEXT */ -#define CPU_ID_REG CP0_CONTEXT -#define CPU_ID_MFC0 MFC0 -#endif .macro get_saved_sp /* SMP variation */ - CPU_ID_MFC0 k0, CPU_ID_REG + ASM_CPUID_MFC0 k0, ASM_SMP_CPUID_REG #if defined(CONFIG_32BIT) || defined(KBUILD_64BIT_SYM32) lui k1, %hi(kernelsp) #else @@ -117,17 +105,17 @@ daddiu k1, %hi(kernelsp) dsll k1, 16 #endif - LONG_SRL k0, PTEBASE_SHIFT + LONG_SRL k0, SMP_CPUID_PTRSHIFT LONG_ADDU k1, k0 LONG_L k1, %lo(kernelsp)(k1) .endm .macro set_saved_sp stackp temp temp2 - CPU_ID_MFC0 \temp, CPU_ID_REG - LONG_SRL \temp, PTEBASE_SHIFT + ASM_CPUID_MFC0 \temp, ASM_SMP_CPUID_REG + LONG_SRL \temp, SMP_CPUID_PTRSHIFT LONG_S \stackp, kernelsp(\temp) .endm -#else +#else /* !CONFIG_SMP */ .macro get_saved_sp /* Uniprocessor variation */ #ifdef CONFIG_CPU_JUMP_WORKAROUNDS /* diff --git a/arch/mips/include/asm/syscall.h b/arch/mips/include/asm/syscall.h new file mode 100644 index 00000000000..81c89132c59 --- /dev/null +++ b/arch/mips/include/asm/syscall.h @@ -0,0 +1,116 @@ +/* + * Access to user system call parameters and results + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * See asm-generic/syscall.h for descriptions of what we must do here. + * + * Copyright (C) 2012 Ralf Baechle <ralf@linux-mips.org> + */ + +#ifndef __ASM_MIPS_SYSCALL_H +#define __ASM_MIPS_SYSCALL_H + +#include <linux/audit.h> +#include <linux/elf-em.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/uaccess.h> +#include <asm/ptrace.h> + +static inline long syscall_get_nr(struct task_struct *task, + struct pt_regs *regs) +{ + return regs->regs[2]; +} + +static inline unsigned long mips_get_syscall_arg(unsigned long *arg, + struct task_struct *task, struct pt_regs *regs, unsigned int n) +{ + unsigned long usp = regs->regs[29]; + + switch (n) { + case 0: case 1: case 2: case 3: + *arg = regs->regs[4 + n]; + + return 0; + +#ifdef CONFIG_32BIT + case 4: case 5: case 6: case 7: + return get_user(*arg, (int *)usp + 4 * n); +#endif + +#ifdef CONFIG_64BIT + case 4: case 5: case 6: case 7: +#ifdef CONFIG_MIPS32_O32 + if (test_thread_flag(TIF_32BIT_REGS)) + return get_user(*arg, (int *)usp + 4 * n); + else +#endif + *arg = regs->regs[4 + n]; + + return 0; +#endif + + default: + BUG(); + } +} + +static inline long syscall_get_return_value(struct task_struct *task, + struct pt_regs *regs) +{ + return regs->regs[2]; +} + +static inline void syscall_set_return_value(struct task_struct *task, + struct pt_regs *regs, + int error, long val) +{ + if (error) { + regs->regs[2] = -error; + regs->regs[7] = -1; + } else { + regs->regs[2] = val; + regs->regs[7] = 0; + } +} + +static inline void syscall_get_arguments(struct task_struct *task, + struct pt_regs *regs, + unsigned int i, unsigned int n, + unsigned long *args) +{ + unsigned long arg; + int ret; + + while (n--) + ret |= mips_get_syscall_arg(&arg, task, regs, i++); + + /* + * No way to communicate an error because this is a void function. + */ +#if 0 + return ret; +#endif +} + +extern const unsigned long sys_call_table[]; +extern const unsigned long sys32_call_table[]; +extern const unsigned long sysn32_call_table[]; + +static inline int __syscall_get_arch(void) +{ + int arch = EM_MIPS; +#ifdef CONFIG_64BIT + arch |= __AUDIT_ARCH_64BIT; +#endif +#if defined(__LITTLE_ENDIAN) + arch |= __AUDIT_ARCH_LE; +#endif + return arch; +} + +#endif /* __ASM_MIPS_SYSCALL_H */ diff --git a/arch/mips/include/asm/thread_info.h b/arch/mips/include/asm/thread_info.h index 61215a34acc..f9b24bfbdba 100644 --- a/arch/mips/include/asm/thread_info.h +++ b/arch/mips/include/asm/thread_info.h @@ -116,6 +116,7 @@ static inline struct thread_info *current_thread_info(void) #define TIF_32BIT_ADDR 23 /* 32-bit address space (o32/n32) */ #define TIF_FPUBOUND 24 /* thread bound to FPU-full CPU set */ #define TIF_LOAD_WATCH 25 /* If set, load watch registers */ +#define TIF_SYSCALL_TRACEPOINT 26 /* syscall tracepoint instrumentation */ #define TIF_SYSCALL_TRACE 31 /* syscall trace active */ #define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE) @@ -132,21 +133,54 @@ static inline struct thread_info *current_thread_info(void) #define _TIF_32BIT_ADDR (1<<TIF_32BIT_ADDR) #define _TIF_FPUBOUND (1<<TIF_FPUBOUND) #define _TIF_LOAD_WATCH (1<<TIF_LOAD_WATCH) +#define _TIF_SYSCALL_TRACEPOINT (1<<TIF_SYSCALL_TRACEPOINT) #define _TIF_WORK_SYSCALL_ENTRY (_TIF_NOHZ | _TIF_SYSCALL_TRACE | \ - _TIF_SYSCALL_AUDIT) + _TIF_SYSCALL_AUDIT | _TIF_SYSCALL_TRACEPOINT) /* work to do in syscall_trace_leave() */ #define _TIF_WORK_SYSCALL_EXIT (_TIF_NOHZ | _TIF_SYSCALL_TRACE | \ - _TIF_SYSCALL_AUDIT) + _TIF_SYSCALL_AUDIT | _TIF_SYSCALL_TRACEPOINT) /* work to do on interrupt/exception return */ #define _TIF_WORK_MASK \ (_TIF_SIGPENDING | _TIF_NEED_RESCHED | _TIF_NOTIFY_RESUME) /* work to do on any return to u-space */ #define _TIF_ALLWORK_MASK (_TIF_NOHZ | _TIF_WORK_MASK | \ - _TIF_WORK_SYSCALL_EXIT) + _TIF_WORK_SYSCALL_EXIT | \ + _TIF_SYSCALL_TRACEPOINT) -#endif /* __KERNEL__ */ +/* + * We stash processor id into a COP0 register to retrieve it fast + * at kernel exception entry. + */ +#if defined(CONFIG_MIPS_MT_SMTC) +#define SMP_CPUID_REG 2, 2 /* TCBIND */ +#define ASM_SMP_CPUID_REG $2, 2 +#define SMP_CPUID_PTRSHIFT 19 +#elif defined(CONFIG_MIPS_PGD_C0_CONTEXT) +#define SMP_CPUID_REG 20, 0 /* XCONTEXT */ +#define ASM_SMP_CPUID_REG $20 +#define SMP_CPUID_PTRSHIFT 48 +#else +#define SMP_CPUID_REG 4, 0 /* CONTEXT */ +#define ASM_SMP_CPUID_REG $4 +#define SMP_CPUID_PTRSHIFT 23 +#endif +#ifdef CONFIG_64BIT +#define SMP_CPUID_REGSHIFT (SMP_CPUID_PTRSHIFT + 3) +#else +#define SMP_CPUID_REGSHIFT (SMP_CPUID_PTRSHIFT + 2) +#endif + +#ifdef CONFIG_MIPS_MT_SMTC +#define ASM_CPUID_MFC0 mfc0 +#define UASM_i_CPUID_MFC0 uasm_i_mfc0 +#else +#define ASM_CPUID_MFC0 MFC0 +#define UASM_i_CPUID_MFC0 UASM_i_MFC0 +#endif + +#endif /* __KERNEL__ */ #endif /* _ASM_THREAD_INFO_H */ diff --git a/arch/mips/include/asm/time.h b/arch/mips/include/asm/time.h index 2d7b9df4542..24f534a7fbc 100644 --- a/arch/mips/include/asm/time.h +++ b/arch/mips/include/asm/time.h @@ -75,7 +75,7 @@ extern int init_r4k_clocksource(void); static inline int init_mips_clocksource(void) { -#if defined(CONFIG_CSRC_R4K) && !defined(CONFIG_CSRC_GIC) +#ifdef CONFIG_CSRC_R4K return init_r4k_clocksource(); #else return 0; diff --git a/arch/mips/include/asm/unistd.h b/arch/mips/include/asm/unistd.h index 63c9c886173..4d3b9288666 100644 --- a/arch/mips/include/asm/unistd.h +++ b/arch/mips/include/asm/unistd.h @@ -14,6 +14,13 @@ #include <uapi/asm/unistd.h> +#ifdef CONFIG_MIPS32_N32 +#define NR_syscalls (__NR_N32_Linux + __NR_N32_Linux_syscalls) +#elif defined(CONFIG_64BIT) +#define NR_syscalls (__NR_64_Linux + __NR_64_Linux_syscalls) +#else +#define NR_syscalls (__NR_O32_Linux + __NR_O32_Linux_syscalls) +#endif #ifndef __ASSEMBLY__ diff --git a/arch/mips/include/uapi/asm/siginfo.h b/arch/mips/include/uapi/asm/siginfo.h index 88e292b7719..e81174432ba 100644 --- a/arch/mips/include/uapi/asm/siginfo.h +++ b/arch/mips/include/uapi/asm/siginfo.h @@ -33,6 +33,8 @@ struct siginfo; #error _MIPS_SZLONG neither 32 nor 64 #endif +#define __ARCH_SIGSYS + #include <asm-generic/siginfo.h> typedef struct siginfo { @@ -97,6 +99,13 @@ typedef struct siginfo { __ARCH_SI_BAND_T _band; /* POLL_IN, POLL_OUT, POLL_MSG */ int _fd; } _sigpoll; + + /* SIGSYS */ + struct { + void __user *_call_addr; /* calling user insn */ + int _syscall; /* triggering system call number */ + unsigned int _arch; /* AUDIT_ARCH_* of syscall */ + } _sigsys; } _sifields; } siginfo_t; diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index 423d871a946..1c1b71752c8 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -26,7 +26,6 @@ obj-$(CONFIG_CEVT_TXX9) += cevt-txx9.o obj-$(CONFIG_CSRC_BCM1480) += csrc-bcm1480.o obj-$(CONFIG_CSRC_GIC) += csrc-gic.o obj-$(CONFIG_CSRC_IOASIC) += csrc-ioasic.o -obj-$(CONFIG_CSRC_POWERTV) += csrc-powertv.o obj-$(CONFIG_CSRC_R4K) += csrc-r4k.o obj-$(CONFIG_CSRC_SB1250) += csrc-sb1250.o obj-$(CONFIG_SYNC_R4K) += sync-r4k.o @@ -35,6 +34,7 @@ obj-$(CONFIG_STACKTRACE) += stacktrace.o obj-$(CONFIG_MODULES) += mips_ksyms.o module.o obj-$(CONFIG_MODULES_USE_ELF_RELA) += module-rela.o +obj-$(CONFIG_FTRACE_SYSCALLS) += ftrace.o obj-$(CONFIG_FUNCTION_TRACER) += mcount.o ftrace.o obj-$(CONFIG_CPU_R4K_FPU) += r4k_fpu.o r4k_switch.o @@ -84,6 +84,7 @@ obj-$(CONFIG_GPIO_TXX9) += gpio_txx9.o obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o crash.o obj-$(CONFIG_CRASH_DUMP) += crash_dump.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o +obj-$(CONFIG_EARLY_PRINTK_8250) += early_printk_8250.o obj-$(CONFIG_SPINLOCK_TEST) += spinlock_test.o obj-$(CONFIG_MIPS_MACHINE) += mips_machine.o diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index 5465dc183e5..c814287bdf5 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -376,13 +376,33 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu) __cpu_name[cpu] = "R4000PC"; } } else { + int cca = read_c0_config() & CONF_CM_CMASK; + int mc; + + /* + * SC and MC versions can't be reliably told apart, + * but only the latter support coherent caching + * modes so assume the firmware has set the KSEG0 + * coherency attribute reasonably (if uncached, we + * assume SC). + */ + switch (cca) { + case CONF_CM_CACHABLE_CE: + case CONF_CM_CACHABLE_COW: + case CONF_CM_CACHABLE_CUW: + mc = 1; + break; + default: + mc = 0; + break; + } if ((c->processor_id & PRID_REV_MASK) >= PRID_REV_R4400) { - c->cputype = CPU_R4400SC; - __cpu_name[cpu] = "R4400SC"; + c->cputype = mc ? CPU_R4400MC : CPU_R4400SC; + __cpu_name[cpu] = mc ? "R4400MC" : "R4400SC"; } else { - c->cputype = CPU_R4000SC; - __cpu_name[cpu] = "R4000SC"; + c->cputype = mc ? CPU_R4000MC : CPU_R4000SC; + __cpu_name[cpu] = mc ? "R4000MC" : "R4000SC"; } } @@ -1079,8 +1099,8 @@ void cpu_report(void) { struct cpuinfo_mips *c = ¤t_cpu_data; - printk(KERN_INFO "CPU revision is: %08x (%s)\n", - c->processor_id, cpu_name_string()); + pr_info("CPU%d revision is: %08x (%s)\n", + smp_processor_id(), c->processor_id, cpu_name_string()); if (c->options & MIPS_CPU_FPU) printk(KERN_INFO "FPU revision is: %08x\n", c->fpu_id); } diff --git a/arch/mips/kernel/csrc-powertv.c b/arch/mips/kernel/csrc-powertv.c deleted file mode 100644 index abd99ea911a..00000000000 --- a/arch/mips/kernel/csrc-powertv.c +++ /dev/null @@ -1,151 +0,0 @@ -/* - * Copyright (C) 2008 Scientific-Atlanta, Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ -/* - * The file comes from kernel/csrc-r4k.c - */ -#include <linux/clocksource.h> -#include <linux/init.h> - -#include <asm/time.h> /* Not included in linux/time.h */ - -#include <asm/mach-powertv/asic_regs.h> -#include "powertv-clock.h" - -/* MIPS PLL Register Definitions */ -#define PLL_GET_M(x) (((x) >> 8) & 0x000000FF) -#define PLL_GET_N(x) (((x) >> 16) & 0x000000FF) -#define PLL_GET_P(x) (((x) >> 24) & 0x00000007) - -/* - * returns: Clock frequency in kHz - */ -unsigned int __init mips_get_pll_freq(void) -{ - unsigned int pll_reg, m, n, p; - unsigned int fin = 54000; /* Base frequency in kHz */ - unsigned int fout; - - /* Read PLL register setting */ - pll_reg = asic_read(mips_pll_setup); - m = PLL_GET_M(pll_reg); - n = PLL_GET_N(pll_reg); - p = PLL_GET_P(pll_reg); - pr_info("MIPS PLL Register:0x%x M=%d N=%d P=%d\n", pll_reg, m, n, p); - - /* Calculate clock frequency = (2 * N * 54MHz) / (M * (2**P)) */ - fout = ((2 * n * fin) / (m * (0x01 << p))); - - pr_info("MIPS Clock Freq=%d kHz\n", fout); - - return fout; -} - -static cycle_t c0_hpt_read(struct clocksource *cs) -{ - return read_c0_count(); -} - -static struct clocksource clocksource_mips = { - .name = "powertv-counter", - .read = c0_hpt_read, - .mask = CLOCKSOURCE_MASK(32), - .flags = CLOCK_SOURCE_IS_CONTINUOUS, -}; - -static void __init powertv_c0_hpt_clocksource_init(void) -{ - unsigned int pll_freq = mips_get_pll_freq(); - - pr_info("CPU frequency %d.%02d MHz\n", pll_freq / 1000, - (pll_freq % 1000) * 100 / 1000); - - mips_hpt_frequency = pll_freq / 2 * 1000; - - clocksource_mips.rating = 200 + mips_hpt_frequency / 10000000; - - clocksource_register_hz(&clocksource_mips, mips_hpt_frequency); -} - -/** - * struct tim_c - free running counter - * @hi: High 16 bits of the counter - * @lo: Low 32 bits of the counter - * - * Lays out the structure of the free running counter in memory. This counter - * increments at a rate of 27 MHz/8 on all platforms. - */ -struct tim_c { - unsigned int hi; - unsigned int lo; -}; - -static struct tim_c *tim_c; - -static cycle_t tim_c_read(struct clocksource *cs) -{ - unsigned int hi; - unsigned int next_hi; - unsigned int lo; - - hi = readl(&tim_c->hi); - - for (;;) { - lo = readl(&tim_c->lo); - next_hi = readl(&tim_c->hi); - if (next_hi == hi) - break; - hi = next_hi; - } - -pr_crit("%s: read %llx\n", __func__, ((u64) hi << 32) | lo); - return ((u64) hi << 32) | lo; -} - -#define TIM_C_SIZE 48 /* # bits in the timer */ - -static struct clocksource clocksource_tim_c = { - .name = "powertv-tim_c", - .read = tim_c_read, - .mask = CLOCKSOURCE_MASK(TIM_C_SIZE), - .flags = CLOCK_SOURCE_IS_CONTINUOUS, -}; - -/** - * powertv_tim_c_clocksource_init - set up a clock source for the TIM_C clock - * - * We know that TIM_C counts at 27 MHz/8, so each cycle corresponds to - * 1 / (27,000,000/8) seconds. - */ -static void __init powertv_tim_c_clocksource_init(void) -{ - const unsigned long counts_per_second = 27000000 / 8; - - clocksource_tim_c.rating = 200; - - clocksource_register_hz(&clocksource_tim_c, counts_per_second); - tim_c = (struct tim_c *) asic_reg_addr(tim_ch); -} - -/** - powertv_clocksource_init - initialize all clocksources - */ -void __init powertv_clocksource_init(void) -{ - powertv_c0_hpt_clocksource_init(); - powertv_tim_c_clocksource_init(); -} diff --git a/arch/mips/kernel/early_printk_8250.c b/arch/mips/kernel/early_printk_8250.c new file mode 100644 index 00000000000..83cea376755 --- /dev/null +++ b/arch/mips/kernel/early_printk_8250.c @@ -0,0 +1,66 @@ +/* + * 8250/16550-type serial ports prom_putchar() + * + * Copyright (C) 2010 Yoichi Yuasa <yuasa@linux-mips.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include <linux/io.h> +#include <linux/serial_core.h> +#include <linux/serial_reg.h> + +static void __iomem *serial8250_base; +static unsigned int serial8250_reg_shift; +static unsigned int serial8250_tx_timeout; + +void setup_8250_early_printk_port(unsigned long base, unsigned int reg_shift, + unsigned int timeout) +{ + serial8250_base = (void __iomem *)base; + serial8250_reg_shift = reg_shift; + serial8250_tx_timeout = timeout; +} + +static inline u8 serial_in(int offset) +{ + return readb(serial8250_base + (offset << serial8250_reg_shift)); +} + +static inline void serial_out(int offset, char value) +{ + writeb(value, serial8250_base + (offset << serial8250_reg_shift)); +} + +void prom_putchar(char c) +{ + unsigned int timeout; + int status, bits; + + if (!serial8250_base) + return; + + timeout = serial8250_tx_timeout; + bits = UART_LSR_TEMT | UART_LSR_THRE; + + do { + status = serial_in(UART_LSR); + + if (--timeout == 0) + break; + } while ((status & bits) != bits); + + if (timeout) + serial_out(UART_TX, c); +} diff --git a/arch/mips/kernel/ftrace.c b/arch/mips/kernel/ftrace.c index dba90ec0dc3..185ba258361 100644 --- a/arch/mips/kernel/ftrace.c +++ b/arch/mips/kernel/ftrace.c @@ -11,11 +11,14 @@ #include <linux/uaccess.h> #include <linux/init.h> #include <linux/ftrace.h> +#include <linux/syscalls.h> #include <asm/asm.h> #include <asm/asm-offsets.h> #include <asm/cacheflush.h> +#include <asm/syscall.h> #include <asm/uasm.h> +#include <asm/unistd.h> #include <asm-generic/sections.h> @@ -364,3 +367,33 @@ out: WARN_ON(1); } #endif /* CONFIG_FUNCTION_GRAPH_TRACER */ + +#ifdef CONFIG_FTRACE_SYSCALLS + +#ifdef CONFIG_32BIT +unsigned long __init arch_syscall_addr(int nr) +{ + return (unsigned long)sys_call_table[nr - __NR_O32_Linux]; +} +#endif + +#ifdef CONFIG_64BIT + +unsigned long __init arch_syscall_addr(int nr) +{ +#ifdef CONFIG_MIPS32_N32 + if (nr >= __NR_N32_Linux && nr <= __NR_N32_Linux + __NR_N32_Linux_syscalls) + return (unsigned long)sysn32_call_table[nr - __NR_N32_Linux]; +#endif + if (nr >= __NR_64_Linux && nr <= __NR_64_Linux + __NR_64_Linux_syscalls) + return (unsigned long)sys_call_table[nr - __NR_64_Linux]; +#ifdef CONFIG_MIPS32_O32 + if (nr >= __NR_O32_Linux && nr <= __NR_O32_Linux + __NR_O32_Linux_syscalls) + return (unsigned long)sys32_call_table[nr - __NR_O32_Linux]; +#endif + + return (unsigned long) &sys_ni_syscall; +} +#endif + +#endif /* CONFIG_FTRACE_SYSCALLS */ diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S index 31fa856829c..47d7583cd67 100644 --- a/arch/mips/kernel/genex.S +++ b/arch/mips/kernel/genex.S @@ -374,12 +374,20 @@ NESTED(except_vec_nmi, 0, sp) NESTED(nmi_handler, PT_SIZE, sp) .set push .set noat + /* + * Clear ERL - restore segment mapping + * Clear BEV - required for page fault exception handler to work + */ + mfc0 k0, CP0_STATUS + ori k0, k0, ST0_EXL + li k1, ~(ST0_BEV | ST0_ERL) + and k0, k0, k1 + mtc0 k0, CP0_STATUS + _ehb SAVE_ALL move a0, sp jal nmi_exception_handler - RESTORE_ALL - .set mips3 - eret + /* nmi_exception_handler never returns */ .set pop END(nmi_handler) diff --git a/arch/mips/kernel/irq_cpu.c b/arch/mips/kernel/irq_cpu.c index 72ef2d25cbf..e498f2b3646 100644 --- a/arch/mips/kernel/irq_cpu.c +++ b/arch/mips/kernel/irq_cpu.c @@ -150,7 +150,7 @@ int __init mips_cpu_intc_init(struct device_node *of_node, domain = irq_domain_add_legacy(of_node, 8, MIPS_CPU_IRQ_BASE, 0, &mips_cpu_intc_irq_domain_ops, NULL); if (!domain) - panic("Failed to add irqdomain for MIPS CPU\n"); + panic("Failed to add irqdomain for MIPS CPU"); return 0; } diff --git a/arch/mips/kernel/module.c b/arch/mips/kernel/module.c index 977a623d925..2a52568dbcd 100644 --- a/arch/mips/kernel/module.c +++ b/arch/mips/kernel/module.c @@ -23,6 +23,7 @@ #include <linux/moduleloader.h> #include <linux/elf.h> #include <linux/mm.h> +#include <linux/numa.h> #include <linux/vmalloc.h> #include <linux/slab.h> #include <linux/fs.h> @@ -46,7 +47,7 @@ static DEFINE_SPINLOCK(dbe_lock); void *module_alloc(unsigned long size) { return __vmalloc_node_range(size, 1, MODULE_START, MODULE_END, - GFP_KERNEL, PAGE_KERNEL, -1, + GFP_KERNEL, PAGE_KERNEL, NUMA_NO_NODE, __builtin_return_address(0)); } #endif diff --git a/arch/mips/kernel/perf_event_mipsxx.c b/arch/mips/kernel/perf_event_mipsxx.c index 45f1ffcf1a4..24cdf64789c 100644 --- a/arch/mips/kernel/perf_event_mipsxx.c +++ b/arch/mips/kernel/perf_event_mipsxx.c @@ -971,11 +971,11 @@ static const struct mips_perf_event mipsxx74Kcore_cache_map [C(LL)] = { [C(OP_READ)] = { [C(RESULT_ACCESS)] = { 0x1c, CNTR_ODD, P }, - [C(RESULT_MISS)] = { 0x1d, CNTR_EVEN | CNTR_ODD, P }, + [C(RESULT_MISS)] = { 0x1d, CNTR_EVEN, P }, }, [C(OP_WRITE)] = { [C(RESULT_ACCESS)] = { 0x1c, CNTR_ODD, P }, - [C(RESULT_MISS)] = { 0x1d, CNTR_EVEN | CNTR_ODD, P }, + [C(RESULT_MISS)] = { 0x1d, CNTR_EVEN, P }, }, }, [C(ITLB)] = { diff --git a/arch/mips/kernel/ptrace.c b/arch/mips/kernel/ptrace.c index 8ae1ebef8b7..b52e1d2b33e 100644 --- a/arch/mips/kernel/ptrace.c +++ b/arch/mips/kernel/ptrace.c @@ -16,16 +16,20 @@ */ #include <linux/compiler.h> #include <linux/context_tracking.h> +#include <linux/elf.h> #include <linux/kernel.h> #include <linux/sched.h> #include <linux/mm.h> #include <linux/errno.h> #include <linux/ptrace.h> +#include <linux/regset.h> #include <linux/smp.h> #include <linux/user.h> #include <linux/security.h> +#include <linux/tracehook.h> #include <linux/audit.h> #include <linux/seccomp.h> +#include <linux/ftrace.h> #include <asm/byteorder.h> #include <asm/cpu.h> @@ -35,10 +39,14 @@ #include <asm/mipsmtregs.h> #include <asm/pgtable.h> #include <asm/page.h> +#include <asm/syscall.h> #include <asm/uaccess.h> #include <asm/bootinfo.h> #include <asm/reg.h> +#define CREATE_TRACE_POINTS +#include <trace/events/syscalls.h> + /* * Called by kernel/ptrace.c when detaching.. * @@ -255,6 +263,133 @@ int ptrace_set_watch_regs(struct task_struct *child, return 0; } +/* regset get/set implementations */ + +static int gpr_get(struct task_struct *target, + const struct user_regset *regset, + unsigned int pos, unsigned int count, + void *kbuf, void __user *ubuf) +{ + struct pt_regs *regs = task_pt_regs(target); + + return user_regset_copyout(&pos, &count, &kbuf, &ubuf, + regs, 0, sizeof(*regs)); +} + +static int gpr_set(struct task_struct *target, + const struct user_regset *regset, + unsigned int pos, unsigned int count, + const void *kbuf, const void __user *ubuf) +{ + struct pt_regs newregs; + int ret; + + ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, + &newregs, + 0, sizeof(newregs)); + if (ret) + return ret; + + *task_pt_regs(target) = newregs; + + return 0; +} + +static int fpr_get(struct task_struct *target, + const struct user_regset *regset, + unsigned int pos, unsigned int count, + void *kbuf, void __user *ubuf) +{ + return user_regset_copyout(&pos, &count, &kbuf, &ubuf, + &target->thread.fpu, + 0, sizeof(elf_fpregset_t)); + /* XXX fcr31 */ +} + +static int fpr_set(struct task_struct *target, + const struct user_regset *regset, + unsigned int pos, unsigned int count, + const void *kbuf, const void __user *ubuf) +{ + return user_regset_copyin(&pos, &count, &kbuf, &ubuf, + &target->thread.fpu, + 0, sizeof(elf_fpregset_t)); + /* XXX fcr31 */ +} + +enum mips_regset { + REGSET_GPR, + REGSET_FPR, +}; + +static const struct user_regset mips_regsets[] = { + [REGSET_GPR] = { + .core_note_type = NT_PRSTATUS, + .n = ELF_NGREG, + .size = sizeof(unsigned int), + .align = sizeof(unsigned int), + .get = gpr_get, + .set = gpr_set, + }, + [REGSET_FPR] = { + .core_note_type = NT_PRFPREG, + .n = ELF_NFPREG, + .size = sizeof(elf_fpreg_t), + .align = sizeof(elf_fpreg_t), + .get = fpr_get, + .set = fpr_set, + }, +}; + +static const struct user_regset_view user_mips_view = { + .name = "mips", + .e_machine = ELF_ARCH, + .ei_osabi = ELF_OSABI, + .regsets = mips_regsets, + .n = ARRAY_SIZE(mips_regsets), +}; + +static const struct user_regset mips64_regsets[] = { + [REGSET_GPR] = { + .core_note_type = NT_PRSTATUS, + .n = ELF_NGREG, + .size = sizeof(unsigned long), + .align = sizeof(unsigned long), + .get = gpr_get, + .set = gpr_set, + }, + [REGSET_FPR] = { + .core_note_type = NT_PRFPREG, + .n = ELF_NFPREG, + .size = sizeof(elf_fpreg_t), + .align = sizeof(elf_fpreg_t), + .get = fpr_get, + .set = fpr_set, + }, +}; + +static const struct user_regset_view user_mips64_view = { + .name = "mips", + .e_machine = ELF_ARCH, + .ei_osabi = ELF_OSABI, + .regsets = mips64_regsets, + .n = ARRAY_SIZE(mips_regsets), +}; + +const struct user_regset_view *task_user_regset_view(struct task_struct *task) +{ +#ifdef CONFIG_32BIT + return &user_mips_view; +#endif + +#ifdef CONFIG_MIPS32_O32 + if (test_thread_flag(TIF_32BIT_REGS)) + return &user_mips_view; +#endif + + return &user_mips64_view; +} + long arch_ptrace(struct task_struct *child, long request, unsigned long addr, unsigned long data) { @@ -517,52 +652,27 @@ long arch_ptrace(struct task_struct *child, long request, return ret; } -static inline int audit_arch(void) -{ - int arch = EM_MIPS; -#ifdef CONFIG_64BIT - arch |= __AUDIT_ARCH_64BIT; -#endif -#if defined(__LITTLE_ENDIAN) - arch |= __AUDIT_ARCH_LE; -#endif - return arch; -} - /* * Notification of system call entry/exit * - triggered by current->work.syscall_trace */ asmlinkage void syscall_trace_enter(struct pt_regs *regs) { + long ret = 0; user_exit(); /* do the secure computing check first */ secure_computing_strict(regs->regs[2]); - if (!(current->ptrace & PT_PTRACED)) - goto out; - - if (!test_thread_flag(TIF_SYSCALL_TRACE)) - goto out; + if (test_thread_flag(TIF_SYSCALL_TRACE) && + tracehook_report_syscall_entry(regs)) + ret = -1; - /* The 0x80 provides a way for the tracing parent to distinguish - between a syscall stop and SIGTRAP delivery */ - ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) ? - 0x80 : 0)); - - /* - * this isn't the same as continuing with a signal, but it will do - * for normal use. strace only continues with a signal if the - * stopping signal is not SIGTRAP. -brl - */ - if (current->exit_code) { - send_sig(current->exit_code, current, 1); - current->exit_code = 0; - } + if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT))) + trace_sys_enter(regs, regs->regs[2]); -out: - audit_syscall_entry(audit_arch(), regs->regs[2], + audit_syscall_entry(__syscall_get_arch(), + regs->regs[2], regs->regs[4], regs->regs[5], regs->regs[6], regs->regs[7]); } @@ -582,26 +692,11 @@ asmlinkage void syscall_trace_leave(struct pt_regs *regs) audit_syscall_exit(regs); - if (!(current->ptrace & PT_PTRACED)) - return; - - if (!test_thread_flag(TIF_SYSCALL_TRACE)) - return; - - /* The 0x80 provides a way for the tracing parent to distinguish - between a syscall stop and SIGTRAP delivery */ - ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) ? - 0x80 : 0)); + if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT))) + trace_sys_exit(regs, regs->regs[2]); - /* - * this isn't the same as continuing with a signal, but it will do - * for normal use. strace only continues with a signal if the - * stopping signal is not SIGTRAP. -brl - */ - if (current->exit_code) { - send_sig(current->exit_code, current, 1); - current->exit_code = 0; - } + if (test_thread_flag(TIF_SYSCALL_TRACE)) + tracehook_report_syscall_exit(regs, 0); user_enter(); } diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S index e774bb1088b..e8e541b40d8 100644 --- a/arch/mips/kernel/scall32-o32.S +++ b/arch/mips/kernel/scall32-o32.S @@ -40,17 +40,58 @@ NESTED(handle_sys, PT_SIZE, sp) sw t1, PT_EPC(sp) beqz t0, illegal_syscall - sll t0, v0, 3 + sll t0, v0, 2 la t1, sys_call_table addu t1, t0 lw t2, (t1) # syscall routine - lw t3, 4(t1) # >= 0 if we need stack arguments beqz t2, illegal_syscall sw a3, PT_R26(sp) # save a3 for syscall restarting - bgez t3, stackargs -stack_done: + /* + * More than four arguments. Try to deal with it by copying the + * stack arguments from the user stack to the kernel stack. + * This Sucks (TM). + */ + lw t0, PT_R29(sp) # get old user stack pointer + + /* + * We intentionally keep the kernel stack a little below the top of + * userspace so we don't have to do a slower byte accurate check here. + */ + lw t5, TI_ADDR_LIMIT($28) + addu t4, t0, 32 + and t5, t4 + bltz t5, bad_stack # -> sp is bad + + /* + * Ok, copy the args from the luser stack to the kernel stack. + * t3 is the precomputed number of instruction bytes needed to + * load or store arguments 6-8. + */ + + .set push + .set noreorder + .set nomacro + +1: lw t5, 16(t0) # argument #5 from usp +4: lw t6, 20(t0) # argument #6 from usp +3: lw t7, 24(t0) # argument #7 from usp +2: lw t8, 28(t0) # argument #8 from usp + + sw t5, 16(sp) # argument #5 to ksp + sw t6, 20(sp) # argument #6 to ksp + sw t7, 24(sp) # argument #7 to ksp + sw t8, 28(sp) # argument #8 to ksp + .set pop + + .section __ex_table,"a" + PTR 1b,bad_stack + PTR 2b,bad_stack + PTR 3b,bad_stack + PTR 4b,bad_stack + .previous + lw t0, TI_FLAGS($28) # syscall tracing enabled? li t1, _TIF_WORK_SYSCALL_ENTRY and t0, t1 @@ -102,66 +143,6 @@ syscall_trace_entry: /* ------------------------------------------------------------------------ */ /* - * More than four arguments. Try to deal with it by copying the - * stack arguments from the user stack to the kernel stack. - * This Sucks (TM). - */ -stackargs: - lw t0, PT_R29(sp) # get old user stack pointer - - /* - * We intentionally keep the kernel stack a little below the top of - * userspace so we don't have to do a slower byte accurate check here. - */ - lw t5, TI_ADDR_LIMIT($28) - addu t4, t0, 32 - and t5, t4 - bltz t5, bad_stack # -> sp is bad - - /* Ok, copy the args from the luser stack to the kernel stack. - * t3 is the precomputed number of instruction bytes needed to - * load or store arguments 6-8. - */ - - la t1, 5f # load up to 3 arguments - subu t1, t3 -1: lw t5, 16(t0) # argument #5 from usp - .set push - .set noreorder - .set nomacro - jr t1 - addiu t1, 6f - 5f - -2: lw t8, 28(t0) # argument #8 from usp -3: lw t7, 24(t0) # argument #7 from usp -4: lw t6, 20(t0) # argument #6 from usp -5: jr t1 - sw t5, 16(sp) # argument #5 to ksp - -#ifdef CONFIG_CPU_MICROMIPS - sw t8, 28(sp) # argument #8 to ksp - nop - sw t7, 24(sp) # argument #7 to ksp - nop - sw t6, 20(sp) # argument #6 to ksp - nop -#else - sw t8, 28(sp) # argument #8 to ksp - sw t7, 24(sp) # argument #7 to ksp - sw t6, 20(sp) # argument #6 to ksp -#endif -6: j stack_done # go back - nop - .set pop - - .section __ex_table,"a" - PTR 1b,bad_stack - PTR 2b,bad_stack - PTR 3b,bad_stack - PTR 4b,bad_stack - .previous - - /* * The stackpointer for a call with more than 4 arguments is bad. * We probably should handle this case a bit more drastic. */ @@ -187,7 +168,7 @@ illegal_syscall: subu t0, a0, __NR_O32_Linux # check syscall number sltiu v0, t0, __NR_O32_Linux_syscalls + 1 beqz t0, einval # do not recurse - sll t1, t0, 3 + sll t1, t0, 2 beqz v0, einval lw t2, sys_call_table(t1) # syscall routine @@ -218,260 +199,248 @@ einval: li v0, -ENOSYS jr ra END(sys_syscall) - .macro fifty ptr, nargs, from=1, to=50 - sys \ptr \nargs - .if \to-\from - fifty \ptr,\nargs,"(\from+1)",\to - .endif - .endm - - .macro mille ptr, nargs, from=1, to=20 - fifty \ptr,\nargs - .if \to-\from - mille \ptr,\nargs,"(\from+1)",\to - .endif - .endm - - .macro syscalltable - sys sys_syscall 8 /* 4000 */ - sys sys_exit 1 - sys __sys_fork 0 - sys sys_read 3 - sys sys_write 3 - sys sys_open 3 /* 4005 */ - sys sys_close 1 - sys sys_waitpid 3 - sys sys_creat 2 - sys sys_link 2 - sys sys_unlink 1 /* 4010 */ - sys sys_execve 0 - sys sys_chdir 1 - sys sys_time 1 - sys sys_mknod 3 - sys sys_chmod 2 /* 4015 */ - sys sys_lchown 3 - sys sys_ni_syscall 0 - sys sys_ni_syscall 0 /* was sys_stat */ - sys sys_lseek 3 - sys sys_getpid 0 /* 4020 */ - sys sys_mount 5 - sys sys_oldumount 1 - sys sys_setuid 1 - sys sys_getuid 0 - sys sys_stime 1 /* 4025 */ - sys sys_ptrace 4 - sys sys_alarm 1 - sys sys_ni_syscall 0 /* was sys_fstat */ - sys sys_pause 0 - sys sys_utime 2 /* 4030 */ - sys sys_ni_syscall 0 - sys sys_ni_syscall 0 - sys sys_access 2 - sys sys_nice 1 - sys sys_ni_syscall 0 /* 4035 */ - sys sys_sync 0 - sys sys_kill 2 - sys sys_rename 2 - sys sys_mkdir 2 - sys sys_rmdir 1 /* 4040 */ - sys sys_dup 1 - sys sysm_pipe 0 - sys sys_times 1 - sys sys_ni_syscall 0 - sys sys_brk 1 /* 4045 */ - sys sys_setgid 1 - sys sys_getgid 0 - sys sys_ni_syscall 0 /* was signal(2) */ - sys sys_geteuid 0 - sys sys_getegid 0 /* 4050 */ - sys sys_acct 1 - sys sys_umount 2 - sys sys_ni_syscall 0 - sys sys_ioctl 3 - sys sys_fcntl 3 /* 4055 */ - sys sys_ni_syscall 2 - sys sys_setpgid 2 - sys sys_ni_syscall 0 - sys sys_olduname 1 - sys sys_umask 1 /* 4060 */ - sys sys_chroot 1 - sys sys_ustat 2 - sys sys_dup2 2 - sys sys_getppid 0 - sys sys_getpgrp 0 /* 4065 */ - sys sys_setsid 0 - sys sys_sigaction 3 - sys sys_sgetmask 0 - sys sys_ssetmask 1 - sys sys_setreuid 2 /* 4070 */ - sys sys_setregid 2 - sys sys_sigsuspend 0 - sys sys_sigpending 1 - sys sys_sethostname 2 - sys sys_setrlimit 2 /* 4075 */ - sys sys_getrlimit 2 - sys sys_getrusage 2 - sys sys_gettimeofday 2 - sys sys_settimeofday 2 - sys sys_getgroups 2 /* 4080 */ - sys sys_setgroups 2 - sys sys_ni_syscall 0 /* old_select */ - sys sys_symlink 2 - sys sys_ni_syscall 0 /* was sys_lstat */ - sys sys_readlink 3 /* 4085 */ - sys sys_uselib 1 - sys sys_swapon 2 - sys sys_reboot 3 - sys sys_old_readdir 3 - sys sys_mips_mmap 6 /* 4090 */ - sys sys_munmap 2 - sys sys_truncate 2 - sys sys_ftruncate 2 - sys sys_fchmod 2 - sys sys_fchown 3 /* 4095 */ - sys sys_getpriority 2 - sys sys_setpriority 3 - sys sys_ni_syscall 0 - sys sys_statfs 2 - sys sys_fstatfs 2 /* 4100 */ - sys sys_ni_syscall 0 /* was ioperm(2) */ - sys sys_socketcall 2 - sys sys_syslog 3 - sys sys_setitimer 3 - sys sys_getitimer 2 /* 4105 */ - sys sys_newstat 2 - sys sys_newlstat 2 - sys sys_newfstat 2 - sys sys_uname 1 - sys sys_ni_syscall 0 /* 4110 was iopl(2) */ - sys sys_vhangup 0 - sys sys_ni_syscall 0 /* was sys_idle() */ - sys sys_ni_syscall 0 /* was sys_vm86 */ - sys sys_wait4 4 - sys sys_swapoff 1 /* 4115 */ - sys sys_sysinfo 1 - sys sys_ipc 6 - sys sys_fsync 1 - sys sys_sigreturn 0 - sys __sys_clone 6 /* 4120 */ - sys sys_setdomainname 2 - sys sys_newuname 1 - sys sys_ni_syscall 0 /* sys_modify_ldt */ - sys sys_adjtimex 1 - sys sys_mprotect 3 /* 4125 */ - sys sys_sigprocmask 3 - sys sys_ni_syscall 0 /* was create_module */ - sys sys_init_module 5 - sys sys_delete_module 1 - sys sys_ni_syscall 0 /* 4130 was get_kernel_syms */ - sys sys_quotactl 4 - sys sys_getpgid 1 - sys sys_fchdir 1 - sys sys_bdflush 2 - sys sys_sysfs 3 /* 4135 */ - sys sys_personality 1 - sys sys_ni_syscall 0 /* for afs_syscall */ - sys sys_setfsuid 1 - sys sys_setfsgid 1 - sys sys_llseek 5 /* 4140 */ - sys sys_getdents 3 - sys sys_select 5 - sys sys_flock 2 - sys sys_msync 3 - sys sys_readv 3 /* 4145 */ - sys sys_writev 3 - sys sys_cacheflush 3 - sys sys_cachectl 3 - sys sys_sysmips 4 - sys sys_ni_syscall 0 /* 4150 */ - sys sys_getsid 1 - sys sys_fdatasync 1 - sys sys_sysctl 1 - sys sys_mlock 2 - sys sys_munlock 2 /* 4155 */ - sys sys_mlockall 1 - sys sys_munlockall 0 - sys sys_sched_setparam 2 - sys sys_sched_getparam 2 - sys sys_sched_setscheduler 3 /* 4160 */ - sys sys_sched_getscheduler 1 - sys sys_sched_yield 0 - sys sys_sched_get_priority_max 1 - sys sys_sched_get_priority_min 1 - sys sys_sched_rr_get_interval 2 /* 4165 */ - sys sys_nanosleep, 2 - sys sys_mremap, 5 - sys sys_accept 3 - sys sys_bind 3 - sys sys_connect 3 /* 4170 */ - sys sys_getpeername 3 - sys sys_getsockname 3 - sys sys_getsockopt 5 - sys sys_listen 2 - sys sys_recv 4 /* 4175 */ - sys sys_recvfrom 6 - sys sys_recvmsg 3 - sys sys_send 4 - sys sys_sendmsg 3 - sys sys_sendto 6 /* 4180 */ - sys sys_setsockopt 5 - sys sys_shutdown 2 - sys sys_socket 3 - sys sys_socketpair 4 - sys sys_setresuid 3 /* 4185 */ - sys sys_getresuid 3 - sys sys_ni_syscall 0 /* was sys_query_module */ - sys sys_poll 3 - sys sys_ni_syscall 0 /* was nfsservctl */ - sys sys_setresgid 3 /* 4190 */ - sys sys_getresgid 3 - sys sys_prctl 5 - sys sys_rt_sigreturn 0 - sys sys_rt_sigaction 4 - sys sys_rt_sigprocmask 4 /* 4195 */ - sys sys_rt_sigpending 2 - sys sys_rt_sigtimedwait 4 - sys sys_rt_sigqueueinfo 3 - sys sys_rt_sigsuspend 0 - sys sys_pread64 6 /* 4200 */ - sys sys_pwrite64 6 - sys sys_chown 3 - sys sys_getcwd 2 - sys sys_capget 2 - sys sys_capset 2 /* 4205 */ - sys sys_sigaltstack 0 - sys sys_sendfile 4 - sys sys_ni_syscall 0 - sys sys_ni_syscall 0 - sys sys_mips_mmap2 6 /* 4210 */ - sys sys_truncate64 4 - sys sys_ftruncate64 4 - sys sys_stat64 2 - sys sys_lstat64 2 - sys sys_fstat64 2 /* 4215 */ - sys sys_pivot_root 2 - sys sys_mincore 3 - sys sys_madvise 3 - sys sys_getdents64 3 - sys sys_fcntl64 3 /* 4220 */ - sys sys_ni_syscall 0 - sys sys_gettid 0 - sys sys_readahead 5 - sys sys_setxattr 5 - sys sys_lsetxattr 5 /* 4225 */ - sys sys_fsetxattr 5 - sys sys_getxattr 4 - sys sys_lgetxattr 4 - sys sys_fgetxattr 4 - sys sys_listxattr 3 /* 4230 */ - sys sys_llistxattr 3 - sys sys_flistxattr 3 - sys sys_removexattr 2 - sys sys_lremovexattr 2 - sys sys_fremovexattr 2 /* 4235 */ - sys sys_tkill 2 - sys sys_sendfile64 5 - sys sys_futex 6 + .align 2 + .type sys_call_table, @object +EXPORT(sys_call_table) + PTR sys_syscall /* 4000 */ + PTR sys_exit + PTR __sys_fork + PTR sys_read + PTR sys_write + PTR sys_open /* 4005 */ + PTR sys_close + PTR sys_waitpid + PTR sys_creat + PTR sys_link + PTR sys_unlink /* 4010 */ + PTR sys_execve + PTR sys_chdir + PTR sys_time + PTR sys_mknod + PTR sys_chmod /* 4015 */ + PTR sys_lchown + PTR sys_ni_syscall + PTR sys_ni_syscall /* was sys_stat */ + PTR sys_lseek + PTR sys_getpid /* 4020 */ + PTR sys_mount + PTR sys_oldumount + PTR sys_setuid + PTR sys_getuid + PTR sys_stime /* 4025 */ + PTR sys_ptrace + PTR sys_alarm + PTR sys_ni_syscall /* was sys_fstat */ + PTR sys_pause + PTR sys_utime /* 4030 */ + PTR sys_ni_syscall + PTR sys_ni_syscall + PTR sys_access + PTR sys_nice + PTR sys_ni_syscall /* 4035 */ + PTR sys_sync + PTR sys_kill + PTR sys_rename + PTR sys_mkdir + PTR sys_rmdir /* 4040 */ + PTR sys_dup + PTR sysm_pipe + PTR sys_times + PTR sys_ni_syscall + PTR sys_brk /* 4045 */ + PTR sys_setgid + PTR sys_getgid + PTR sys_ni_syscall /* was signal(2) */ + PTR sys_geteuid + PTR sys_getegid /* 4050 */ + PTR sys_acct + PTR sys_umount + PTR sys_ni_syscall + PTR sys_ioctl + PTR sys_fcntl /* 4055 */ + PTR sys_ni_syscall + PTR sys_setpgid + PTR sys_ni_syscall + PTR sys_olduname + PTR sys_umask /* 4060 */ + PTR sys_chroot + PTR sys_ustat + PTR sys_dup2 + PTR sys_getppid + PTR sys_getpgrp /* 4065 */ + PTR sys_setsid + PTR sys_sigaction + PTR sys_sgetmask + PTR sys_ssetmask + PTR sys_setreuid /* 4070 */ + PTR sys_setregid + PTR sys_sigsuspend + PTR sys_sigpending + PTR sys_sethostname + PTR sys_setrlimit /* 4075 */ + PTR sys_getrlimit + PTR sys_getrusage + PTR sys_gettimeofday + PTR sys_settimeofday + PTR sys_getgroups /* 4080 */ + PTR sys_setgroups + PTR sys_ni_syscall /* old_select */ + PTR sys_symlink + PTR sys_ni_syscall /* was sys_lstat */ + PTR sys_readlink /* 4085 */ + PTR sys_uselib + PTR sys_swapon + PTR sys_reboot + PTR sys_old_readdir + PTR sys_mips_mmap /* 4090 */ + PTR sys_munmap + PTR sys_truncate + PTR sys_ftruncate + PTR sys_fchmod + PTR sys_fchown /* 4095 */ + PTR sys_getpriority + PTR sys_setpriority + PTR sys_ni_syscall + PTR sys_statfs + PTR sys_fstatfs /* 4100 */ + PTR sys_ni_syscall /* was ioperm(2) */ + PTR sys_socketcall + PTR sys_syslog + PTR sys_setitimer + PTR sys_getitimer /* 4105 */ + PTR sys_newstat + PTR sys_newlstat + PTR sys_newfstat + PTR sys_uname + PTR sys_ni_syscall /* 4110 was iopl(2) */ + PTR sys_vhangup + PTR sys_ni_syscall /* was sys_idle() */ + PTR sys_ni_syscall /* was sys_vm86 */ + PTR sys_wait4 + PTR sys_swapoff /* 4115 */ + PTR sys_sysinfo + PTR sys_ipc + PTR sys_fsync + PTR sys_sigreturn + PTR __sys_clone /* 4120 */ + PTR sys_setdomainname + PTR sys_newuname + PTR sys_ni_syscall /* sys_modify_ldt */ + PTR sys_adjtimex + PTR sys_mprotect /* 4125 */ + PTR sys_sigprocmask + PTR sys_ni_syscall /* was create_module */ + PTR sys_init_module + PTR sys_delete_module + PTR sys_ni_syscall /* 4130 was get_kernel_syms */ + PTR sys_quotactl + PTR sys_getpgid + PTR sys_fchdir + PTR sys_bdflush + PTR sys_sysfs /* 4135 */ + PTR sys_personality + PTR sys_ni_syscall /* for afs_syscall */ + PTR sys_setfsuid + PTR sys_setfsgid + PTR sys_llseek /* 4140 */ + PTR sys_getdents + PTR sys_select + PTR sys_flock + PTR sys_msync + PTR sys_readv /* 4145 */ + PTR sys_writev + PTR sys_cacheflush + PTR sys_cachectl + PTR sys_sysmips + PTR sys_ni_syscall /* 4150 */ + PTR sys_getsid + PTR sys_fdatasync + PTR sys_sysctl + PTR sys_mlock + PTR sys_munlock /* 4155 */ + PTR sys_mlockall + PTR sys_munlockall + PTR sys_sched_setparam + PTR sys_sched_getparam + PTR sys_sched_setscheduler /* 4160 */ + PTR sys_sched_getscheduler + PTR sys_sched_yield + PTR sys_sched_get_priority_max + PTR sys_sched_get_priority_min + PTR sys_sched_rr_get_interval /* 4165 */ + PTR sys_nanosleep + PTR sys_mremap + PTR sys_accept + PTR sys_bind + PTR sys_connect /* 4170 */ + PTR sys_getpeername + PTR sys_getsockname + PTR sys_getsockopt + PTR sys_listen + PTR sys_recv /* 4175 */ + PTR sys_recvfrom + PTR sys_recvmsg + PTR sys_send + PTR sys_sendmsg + PTR sys_sendto /* 4180 */ + PTR sys_setsockopt + PTR sys_shutdown + PTR sys_socket + PTR sys_socketpair + PTR sys_setresuid /* 4185 */ + PTR sys_getresuid + PTR sys_ni_syscall /* was sys_query_module */ + PTR sys_poll + PTR sys_ni_syscall /* was nfsservctl */ + PTR sys_setresgid /* 4190 */ + PTR sys_getresgid + PTR sys_prctl + PTR sys_rt_sigreturn + PTR sys_rt_sigaction + PTR sys_rt_sigprocmask /* 4195 */ + PTR sys_rt_sigpending + PTR sys_rt_sigtimedwait + PTR sys_rt_sigqueueinfo + PTR sys_rt_sigsuspend + PTR sys_pread64 /* 4200 */ + PTR sys_pwrite64 + PTR sys_chown + PTR sys_getcwd + PTR sys_capget + PTR sys_capset /* 4205 */ + PTR sys_sigaltstack + PTR sys_sendfile + PTR sys_ni_syscall + PTR sys_ni_syscall + PTR sys_mips_mmap2 /* 4210 */ + PTR sys_truncate64 + PTR sys_ftruncate64 + PTR sys_stat64 + PTR sys_lstat64 + PTR sys_fstat64 /* 4215 */ + PTR sys_pivot_root + PTR sys_mincore + PTR sys_madvise + PTR sys_getdents64 + PTR sys_fcntl64 /* 4220 */ + PTR sys_ni_syscall + PTR sys_gettid + PTR sys_readahead + PTR sys_setxattr + PTR sys_lsetxattr /* 4225 */ + PTR sys_fsetxattr + PTR sys_getxattr + PTR sys_lgetxattr + PTR sys_fgetxattr + PTR sys_listxattr /* 4230 */ + PTR sys_llistxattr + PTR sys_flistxattr + PTR sys_removexattr + PTR sys_lremovexattr + PTR sys_fremovexattr /* 4235 */ + PTR sys_tkill + PTR sys_sendfile64 + PTR sys_futex #ifdef CONFIG_MIPS_MT_FPAFF /* * For FPU affinity scheduling on MIPS MT processors, we need to @@ -480,132 +449,117 @@ einval: li v0, -ENOSYS * these hooks for the 32-bit kernel - there is no MIPS64 MT processor * atm. */ - sys mipsmt_sys_sched_setaffinity 3 - sys mipsmt_sys_sched_getaffinity 3 + PTR mipsmt_sys_sched_setaffinity + PTR mipsmt_sys_sched_getaffinity #else - sys sys_sched_setaffinity 3 - sys sys_sched_getaffinity 3 /* 4240 */ + PTR sys_sched_setaffinity + PTR sys_sched_getaffinity /* 4240 */ #endif /* CONFIG_MIPS_MT_FPAFF */ - sys sys_io_setup 2 - sys sys_io_destroy 1 - sys sys_io_getevents 5 - sys sys_io_submit 3 - sys sys_io_cancel 3 /* 4245 */ - sys sys_exit_group 1 - sys sys_lookup_dcookie 4 - sys sys_epoll_create 1 - sys sys_epoll_ctl 4 - sys sys_epoll_wait 4 /* 4250 */ - sys sys_remap_file_pages 5 - sys sys_set_tid_address 1 - sys sys_restart_syscall 0 - sys sys_fadvise64_64 7 - sys sys_statfs64 3 /* 4255 */ - sys sys_fstatfs64 2 - sys sys_timer_create 3 - sys sys_timer_settime 4 - sys sys_timer_gettime 2 - sys sys_timer_getoverrun 1 /* 4260 */ - sys sys_timer_delete 1 - sys sys_clock_settime 2 - sys sys_clock_gettime 2 - sys sys_clock_getres 2 - sys sys_clock_nanosleep 4 /* 4265 */ - sys sys_tgkill 3 - sys sys_utimes 2 - sys sys_mbind 4 - sys sys_ni_syscall 0 /* sys_get_mempolicy */ - sys sys_ni_syscall 0 /* 4270 sys_set_mempolicy */ - sys sys_mq_open 4 - sys sys_mq_unlink 1 - sys sys_mq_timedsend 5 - sys sys_mq_timedreceive 5 - sys sys_mq_notify 2 /* 4275 */ - sys sys_mq_getsetattr 3 - sys sys_ni_syscall 0 /* sys_vserver */ - sys sys_waitid 5 - sys sys_ni_syscall 0 /* available, was setaltroot */ - sys sys_add_key 5 /* 4280 */ - sys sys_request_key 4 - sys sys_keyctl 5 - sys sys_set_thread_area 1 - sys sys_inotify_init 0 - sys sys_inotify_add_watch 3 /* 4285 */ - sys sys_inotify_rm_watch 2 - sys sys_migrate_pages 4 - sys sys_openat 4 - sys sys_mkdirat 3 - sys sys_mknodat 4 /* 4290 */ - sys sys_fchownat 5 - sys sys_futimesat 3 - sys sys_fstatat64 4 - sys sys_unlinkat 3 - sys sys_renameat 4 /* 4295 */ - sys sys_linkat 5 - sys sys_symlinkat 3 - sys sys_readlinkat 4 - sys sys_fchmodat 3 - sys sys_faccessat 3 /* 4300 */ - sys sys_pselect6 6 - sys sys_ppoll 5 - sys sys_unshare 1 - sys sys_splice 6 - sys sys_sync_file_range 7 /* 4305 */ - sys sys_tee 4 - sys sys_vmsplice 4 - sys sys_move_pages 6 - sys sys_set_robust_list 2 - sys sys_get_robust_list 3 /* 4310 */ - sys sys_kexec_load 4 - sys sys_getcpu 3 - sys sys_epoll_pwait 6 - sys sys_ioprio_set 3 - sys sys_ioprio_get 2 /* 4315 */ - sys sys_utimensat 4 - sys sys_signalfd 3 - sys sys_ni_syscall 0 /* was timerfd */ - sys sys_eventfd 1 - sys sys_fallocate 6 /* 4320 */ - sys sys_timerfd_create 2 - sys sys_timerfd_gettime 2 - sys sys_timerfd_settime 4 - sys sys_signalfd4 4 - sys sys_eventfd2 2 /* 4325 */ - sys sys_epoll_create1 1 - sys sys_dup3 3 - sys sys_pipe2 2 - sys sys_inotify_init1 1 - sys sys_preadv 6 /* 4330 */ - sys sys_pwritev 6 - sys sys_rt_tgsigqueueinfo 4 - sys sys_perf_event_open 5 - sys sys_accept4 4 - sys sys_recvmmsg 5 /* 4335 */ - sys sys_fanotify_init 2 - sys sys_fanotify_mark 6 - sys sys_prlimit64 4 - sys sys_name_to_handle_at 5 - sys sys_open_by_handle_at 3 /* 4340 */ - sys sys_clock_adjtime 2 - sys sys_syncfs 1 - sys sys_sendmmsg 4 - sys sys_setns 2 - sys sys_process_vm_readv 6 /* 4345 */ - sys sys_process_vm_writev 6 - sys sys_kcmp 5 - sys sys_finit_module 3 - .endm - - /* We pre-compute the number of _instruction_ bytes needed to - load or store the arguments 6-8. Negative values are ignored. */ - - .macro sys function, nargs - PTR \function - LONG (\nargs << 2) - (5 << 2) - .endm - - .align 3 - .type sys_call_table,@object -EXPORT(sys_call_table) - syscalltable - .size sys_call_table, . - sys_call_table + PTR sys_io_setup + PTR sys_io_destroy + PTR sys_io_getevents + PTR sys_io_submit + PTR sys_io_cancel /* 4245 */ + PTR sys_exit_group + PTR sys_lookup_dcookie + PTR sys_epoll_create + PTR sys_epoll_ctl + PTR sys_epoll_wait /* 4250 */ + PTR sys_remap_file_pages + PTR sys_set_tid_address + PTR sys_restart_syscall + PTR sys_fadvise64_64 + PTR sys_statfs64 /* 4255 */ + PTR sys_fstatfs64 + PTR sys_timer_create + PTR sys_timer_settime + PTR sys_timer_gettime + PTR sys_timer_getoverrun /* 4260 */ + PTR sys_timer_delete + PTR sys_clock_settime + PTR sys_clock_gettime + PTR sys_clock_getres + PTR sys_clock_nanosleep /* 4265 */ + PTR sys_tgkill + PTR sys_utimes + PTR sys_mbind + PTR sys_ni_syscall /* sys_get_mempolicy */ + PTR sys_ni_syscall /* 4270 sys_set_mempolicy */ + PTR sys_mq_open + PTR sys_mq_unlink + PTR sys_mq_timedsend + PTR sys_mq_timedreceive + PTR sys_mq_notify /* 4275 */ + PTR sys_mq_getsetattr + PTR sys_ni_syscall /* sys_vserver */ + PTR sys_waitid + PTR sys_ni_syscall /* available, was setaltroot */ + PTR sys_add_key /* 4280 */ + PTR sys_request_key + PTR sys_keyctl + PTR sys_set_thread_area + PTR sys_inotify_init + PTR sys_inotify_add_watch /* 4285 */ + PTR sys_inotify_rm_watch + PTR sys_migrate_pages + PTR sys_openat + PTR sys_mkdirat + PTR sys_mknodat /* 4290 */ + PTR sys_fchownat + PTR sys_futimesat + PTR sys_fstatat64 + PTR sys_unlinkat + PTR sys_renameat /* 4295 */ + PTR sys_linkat + PTR sys_symlinkat + PTR sys_readlinkat + PTR sys_fchmodat + PTR sys_faccessat /* 4300 */ + PTR sys_pselect6 + PTR sys_ppoll + PTR sys_unshare + PTR sys_splice + PTR sys_sync_file_range /* 4305 */ + PTR sys_tee + PTR sys_vmsplice + PTR sys_move_pages + PTR sys_set_robust_list + PTR sys_get_robust_list /* 4310 */ + PTR sys_kexec_load + PTR sys_getcpu + PTR sys_epoll_pwait + PTR sys_ioprio_set + PTR sys_ioprio_get /* 4315 */ + PTR sys_utimensat + PTR sys_signalfd + PTR sys_ni_syscall /* was timerfd */ + PTR sys_eventfd + PTR sys_fallocate /* 4320 */ + PTR sys_timerfd_create + PTR sys_timerfd_gettime + PTR sys_timerfd_settime + PTR sys_signalfd4 + PTR sys_eventfd2 /* 4325 */ + PTR sys_epoll_create1 + PTR sys_dup3 + PTR sys_pipe2 + PTR sys_inotify_init1 + PTR sys_preadv /* 4330 */ + PTR sys_pwritev + PTR sys_rt_tgsigqueueinfo + PTR sys_perf_event_open + PTR sys_accept4 + PTR sys_recvmmsg /* 4335 */ + PTR sys_fanotify_init + PTR sys_fanotify_mark + PTR sys_prlimit64 + PTR sys_name_to_handle_at + PTR sys_open_by_handle_at /* 4340 */ + PTR sys_clock_adjtime + PTR sys_syncfs + PTR sys_sendmmsg + PTR sys_setns + PTR sys_process_vm_readv /* 4345 */ + PTR sys_process_vm_writev + PTR sys_kcmp + PTR sys_finit_module diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S index be6627ead61..57e3742fec5 100644 --- a/arch/mips/kernel/scall64-64.S +++ b/arch/mips/kernel/scall64-64.S @@ -114,7 +114,8 @@ illegal_syscall: END(handle_sys64) .align 3 -sys_call_table: + .type sys_call_table, @object +EXPORT(sys_call_table) PTR sys_read /* 5000 */ PTR sys_write PTR sys_open diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S index cab150789c8..2f48f593439 100644 --- a/arch/mips/kernel/scall64-n32.S +++ b/arch/mips/kernel/scall64-n32.S @@ -103,6 +103,7 @@ not_n32_scall: END(handle_sysn32) + .type sysn32_call_table, @object EXPORT(sysn32_call_table) PTR sys_read /* 6000 */ PTR sys_write diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S index 37605dc8eef..f1acdb429f4 100644 --- a/arch/mips/kernel/scall64-o32.S +++ b/arch/mips/kernel/scall64-o32.S @@ -53,7 +53,7 @@ NESTED(handle_sys, PT_SIZE, sp) sll a3, a3, 0 dsll t0, v0, 3 # offset into table - ld t2, (sys_call_table - (__NR_O32_Linux * 8))(t0) + ld t2, (sys32_call_table - (__NR_O32_Linux * 8))(t0) sd a3, PT_R26(sp) # save a3 for syscall restarting @@ -168,7 +168,7 @@ LEAF(sys32_syscall) beqz t0, einval # do not recurse dsll t1, t0, 3 beqz v0, einval - ld t2, sys_call_table(t1) # syscall routine + ld t2, sys32_call_table(t1) # syscall routine move a0, a1 # shift argument registers move a1, a2 @@ -190,8 +190,8 @@ einval: li v0, -ENOSYS END(sys32_syscall) .align 3 - .type sys_call_table,@object -sys_call_table: + .type sys32_call_table,@object +EXPORT(sys32_call_table) PTR sys32_syscall /* 4000 */ PTR sys_exit PTR __sys_fork @@ -541,4 +541,4 @@ sys_call_table: PTR compat_sys_process_vm_writev PTR sys_kcmp PTR sys_finit_module - .size sys_call_table,.-sys_call_table + .size sys32_call_table,.-sys32_call_table diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c index c538d6e01b7..a842154d57d 100644 --- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c @@ -300,12 +300,13 @@ static void __init bootmem_init(void) int i; /* - * Init any data related to initrd. It's a nop if INITRD is - * not selected. Once that done we can determine the low bound - * of usable memory. + * Sanity check any INITRD first. We don't take it into account + * for bootmem setup initially, rely on the end-of-kernel-code + * as our memory range starting point. Once bootmem is inited we + * will reserve the area used for the initrd. */ - reserved_end = max(init_initrd(), - (unsigned long) PFN_UP(__pa_symbol(&_end))); + init_initrd(); + reserved_end = (unsigned long) PFN_UP(__pa_symbol(&_end)); /* * max_low_pfn is not a number of pages. The number of pages @@ -362,6 +363,14 @@ static void __init bootmem_init(void) max_low_pfn = PFN_DOWN(HIGHMEM_START); } +#ifdef CONFIG_BLK_DEV_INITRD + /* + * mapstart should be after initrd_end + */ + if (initrd_end) + mapstart = max(mapstart, (unsigned long)PFN_UP(__pa(initrd_end))); +#endif + /* * Initialize the boot-time allocator with low memory only. */ diff --git a/arch/mips/kernel/smp-bmips.c b/arch/mips/kernel/smp-bmips.c index 126da74d4c5..2362665ba49 100644 --- a/arch/mips/kernel/smp-bmips.c +++ b/arch/mips/kernel/smp-bmips.c @@ -136,10 +136,10 @@ static void bmips_prepare_cpus(unsigned int max_cpus) { if (request_irq(IPI0_IRQ, bmips_ipi_interrupt, IRQF_PERCPU, "smp_ipi0", NULL)) - panic("Can't request IPI0 interrupt\n"); + panic("Can't request IPI0 interrupt"); if (request_irq(IPI1_IRQ, bmips_ipi_interrupt, IRQF_PERCPU, "smp_ipi1", NULL)) - panic("Can't request IPI1 interrupt\n"); + panic("Can't request IPI1 interrupt"); } /* diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c index 5c208ed8f85..0a022ee33b2 100644 --- a/arch/mips/kernel/smp.c +++ b/arch/mips/kernel/smp.c @@ -150,7 +150,6 @@ asmlinkage void start_secondary(void) void __irq_entry smp_call_function_interrupt(void) { irq_enter(); - generic_smp_call_function_single_interrupt(); generic_smp_call_function_interrupt(); irq_exit(); } diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 524841f0280..f9c8746be8d 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -330,6 +330,7 @@ void show_regs(struct pt_regs *regs) void show_registers(struct pt_regs *regs) { const int field = 2 * sizeof(unsigned long); + mm_segment_t old_fs = get_fs(); __show_regs(regs); print_modules(); @@ -344,9 +345,13 @@ void show_registers(struct pt_regs *regs) printk("*HwTLS: %0*lx\n", field, tls); } + if (!user_mode(regs)) + /* Necessary for getting the correct stack content */ + set_fs(KERNEL_DS); show_stacktrace(current, regs); show_code((unsigned int __user *) regs->cp0_epc); printk("\n"); + set_fs(old_fs); } static int regs_to_trapnr(struct pt_regs *regs) @@ -366,7 +371,8 @@ void __noreturn die(const char *str, struct pt_regs *regs) oops_enter(); - if (notify_die(DIE_OOPS, str, regs, 0, regs_to_trapnr(regs), SIGSEGV) == NOTIFY_STOP) + if (notify_die(DIE_OOPS, str, regs, 0, regs_to_trapnr(regs), + SIGSEGV) == NOTIFY_STOP) sig = 0; console_verbose(); @@ -457,8 +463,8 @@ asmlinkage void do_be(struct pt_regs *regs) printk(KERN_ALERT "%s bus error, epc == %0*lx, ra == %0*lx\n", data ? "Data" : "Instruction", field, regs->cp0_epc, field, regs->regs[31]); - if (notify_die(DIE_OOPS, "bus error", regs, 0, regs_to_trapnr(regs), SIGBUS) - == NOTIFY_STOP) + if (notify_die(DIE_OOPS, "bus error", regs, 0, regs_to_trapnr(regs), + SIGBUS) == NOTIFY_STOP) goto out; die_if_kernel("Oops", regs); @@ -727,8 +733,8 @@ asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31) siginfo_t info = {0}; prev_state = exception_enter(); - if (notify_die(DIE_FP, "FP exception", regs, 0, regs_to_trapnr(regs), SIGFPE) - == NOTIFY_STOP) + if (notify_die(DIE_FP, "FP exception", regs, 0, regs_to_trapnr(regs), + SIGFPE) == NOTIFY_STOP) goto out; die_if_kernel("FP exception in kernel code", regs); @@ -798,7 +804,8 @@ static void do_trap_or_bp(struct pt_regs *regs, unsigned int code, return; #endif /* CONFIG_KGDB_LOW_LEVEL_TRAP */ - if (notify_die(DIE_TRAP, str, regs, code, regs_to_trapnr(regs), SIGTRAP) == NOTIFY_STOP) + if (notify_die(DIE_TRAP, str, regs, code, regs_to_trapnr(regs), + SIGTRAP) == NOTIFY_STOP) return; /* @@ -892,12 +899,14 @@ asmlinkage void do_bp(struct pt_regs *regs) */ switch (bcode) { case BRK_KPROBE_BP: - if (notify_die(DIE_BREAK, "debug", regs, bcode, regs_to_trapnr(regs), SIGTRAP) == NOTIFY_STOP) + if (notify_die(DIE_BREAK, "debug", regs, bcode, + regs_to_trapnr(regs), SIGTRAP) == NOTIFY_STOP) goto out; else break; case BRK_KPROBE_SSTEPBP: - if (notify_die(DIE_SSTEPBP, "single_step", regs, bcode, regs_to_trapnr(regs), SIGTRAP) == NOTIFY_STOP) + if (notify_die(DIE_SSTEPBP, "single_step", regs, bcode, + regs_to_trapnr(regs), SIGTRAP) == NOTIFY_STOP) goto out; else break; @@ -961,8 +970,8 @@ asmlinkage void do_ri(struct pt_regs *regs) int status = -1; prev_state = exception_enter(); - if (notify_die(DIE_RI, "RI Fault", regs, 0, regs_to_trapnr(regs), SIGILL) - == NOTIFY_STOP) + if (notify_die(DIE_RI, "RI Fault", regs, 0, regs_to_trapnr(regs), + SIGILL) == NOTIFY_STOP) goto out; die_if_kernel("Reserved instruction in kernel code", regs); @@ -1488,10 +1497,14 @@ int register_nmi_notifier(struct notifier_block *nb) void __noreturn nmi_exception_handler(struct pt_regs *regs) { + char str[100]; + raw_notifier_call_chain(&nmi_chain, 0, regs); bust_spinlocks(1); - printk("NMI taken!!!!\n"); - die("NMI", regs); + snprintf(str, 100, "CPU%d NMI taken, CP0_EPC=%lx\n", + smp_processor_id(), regs->cp0_epc); + regs->cp0_epc = read_c0_errorepc(); + die(str, regs); } #define VECTORSPACING 0x100 /* for EI/VI mode */ @@ -1554,7 +1567,6 @@ static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs) unsigned char *b; BUG_ON(!cpu_has_veic && !cpu_has_vint); - BUG_ON((n < 0) && (n > 9)); if (addr == NULL) { handler = (unsigned long) do_default_vi; diff --git a/arch/mips/lantiq/irq.c b/arch/mips/lantiq/irq.c index eb3e1865963..85685e1cdb8 100644 --- a/arch/mips/lantiq/irq.c +++ b/arch/mips/lantiq/irq.c @@ -390,7 +390,7 @@ int __init icu_of_init(struct device_node *node, struct device_node *parent) ret = of_irq_to_resource_table(eiu_node, ltq_eiu_irq, exin_avail); if (ret != exin_avail) - panic("failed to load external irq resources\n"); + panic("failed to load external irq resources"); if (request_mem_region(res.start, resource_size(&res), res.name) < 0) diff --git a/arch/mips/lantiq/xway/sysctrl.c b/arch/mips/lantiq/xway/sysctrl.c index c24924fe087..51804b10a03 100644 --- a/arch/mips/lantiq/xway/sysctrl.c +++ b/arch/mips/lantiq/xway/sysctrl.c @@ -128,7 +128,7 @@ static int pmu_enable(struct clk *clk) do {} while (--retry && (pmu_r32(PWDSR(clk->module)) & clk->bits)); if (!retry) - panic("activating PMU module failed!\n"); + panic("activating PMU module failed!"); return 0; } diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c index bc6f96fcb52..62ffd20ea86 100644 --- a/arch/mips/mm/c-r4k.c +++ b/arch/mips/mm/c-r4k.c @@ -346,14 +346,8 @@ static void r4k_blast_scache_setup(void) static inline void local_r4k___flush_cache_all(void * args) { -#if defined(CONFIG_CPU_LOONGSON2) - r4k_blast_scache(); - return; -#endif - r4k_blast_dcache(); - r4k_blast_icache(); - switch (current_cpu_type()) { + case CPU_LOONGSON2: case CPU_R4000SC: case CPU_R4000MC: case CPU_R4400SC: @@ -361,7 +355,18 @@ static inline void local_r4k___flush_cache_all(void * args) case CPU_R10000: case CPU_R12000: case CPU_R14000: + /* + * These caches are inclusive caches, that is, if something + * is not cached in the S-cache, we know it also won't be + * in one of the primary caches. + */ r4k_blast_scache(); + break; + + default: + r4k_blast_dcache(); + r4k_blast_icache(); + break; } } @@ -572,8 +577,17 @@ static inline void local_r4k_flush_icache_range(unsigned long start, unsigned lo if (end - start > icache_size) r4k_blast_icache(); - else - protected_blast_icache_range(start, end); + else { + switch (boot_cpu_type()) { + case CPU_LOONGSON2: + protected_blast_icache_range(start, end); + break; + + default: + protected_loongson23_blast_icache_range(start, end); + break; + } + } } static inline void local_r4k_flush_icache_range_ipi(void *args) @@ -1109,15 +1123,14 @@ static void probe_pcache(void) case CPU_ALCHEMY: c->icache.flags |= MIPS_CACHE_IC_F_DC; break; - } -#ifdef CONFIG_CPU_LOONGSON2 - /* - * LOONGSON2 has 4 way icache, but when using indexed cache op, - * one op will act on all 4 ways - */ - c->icache.ways = 1; -#endif + case CPU_LOONGSON2: + /* + * LOONGSON2 has 4 way icache, but when using indexed cache op, + * one op will act on all 4 ways + */ + c->icache.ways = 1; + } printk("Primary instruction cache %ldkB, %s, %s, linesize %d bytes.\n", icache_size >> 10, @@ -1193,7 +1206,6 @@ static int probe_scache(void) return 1; } -#if defined(CONFIG_CPU_LOONGSON2) static void __init loongson2_sc_init(void) { struct cpuinfo_mips *c = ¤t_cpu_data; @@ -1209,7 +1221,6 @@ static void __init loongson2_sc_init(void) c->options |= MIPS_CPU_INCLUSIVE_CACHES; } -#endif extern int r5k_sc_init(void); extern int rm7k_sc_init(void); @@ -1259,11 +1270,10 @@ static void setup_scache(void) #endif return; -#if defined(CONFIG_CPU_LOONGSON2) case CPU_LOONGSON2: loongson2_sc_init(); return; -#endif + case CPU_XLP: /* don't need to worry about L2, fully coherent */ return; diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c index 5f8b9551258..2e941856225 100644 --- a/arch/mips/mm/dma-default.c +++ b/arch/mips/mm/dma-default.c @@ -297,7 +297,6 @@ static void mips_dma_sync_single_for_cpu(struct device *dev, static void mips_dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, size_t size, enum dma_data_direction direction) { - plat_extra_sync_for_device(dev); if (!plat_device_is_coherent(dev)) __dma_sync(dma_addr_to_page(dev, dma_handle), dma_handle & ~PAGE_MASK, size, direction); @@ -327,7 +326,7 @@ static void mips_dma_sync_sg_for_device(struct device *dev, int mips_dma_mapping_error(struct device *dev, dma_addr_t dma_addr) { - return plat_dma_mapping_error(dev, dma_addr); + return 0; } int mips_dma_supported(struct device *dev, u64 mask) @@ -340,7 +339,6 @@ void dma_cache_sync(struct device *dev, void *vaddr, size_t size, { BUG_ON(direction == DMA_NONE); - plat_extra_sync_for_device(dev); if (!plat_device_is_coherent(dev)) __dma_sync_virtual(vaddr, size, direction); } diff --git a/arch/mips/mm/tlb-funcs.S b/arch/mips/mm/tlb-funcs.S index 79bca3130bd..30a494db99c 100644 --- a/arch/mips/mm/tlb-funcs.S +++ b/arch/mips/mm/tlb-funcs.S @@ -16,12 +16,10 @@ #define FASTPATH_SIZE 128 -#ifdef CONFIG_MIPS_PGD_C0_CONTEXT LEAF(tlbmiss_handler_setup_pgd) .space 16 * 4 END(tlbmiss_handler_setup_pgd) EXPORT(tlbmiss_handler_setup_pgd_end) -#endif LEAF(handle_tlbm) .space FASTPATH_SIZE * 4 diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c index bb3a5f643e9..da3b0b9c9ea 100644 --- a/arch/mips/mm/tlb-r4k.c +++ b/arch/mips/mm/tlb-r4k.c @@ -52,21 +52,26 @@ extern void build_tlb_refill_handler(void); #endif /* CONFIG_MIPS_MT_SMTC */ -#if defined(CONFIG_CPU_LOONGSON2) /* * LOONGSON2 has a 4 entry itlb which is a subset of dtlb, * unfortrunately, itlb is not totally transparent to software. */ -#define FLUSH_ITLB write_c0_diag(4); - -#define FLUSH_ITLB_VM(vma) { if ((vma)->vm_flags & VM_EXEC) write_c0_diag(4); } - -#else - -#define FLUSH_ITLB -#define FLUSH_ITLB_VM(vma) +static inline void flush_itlb(void) +{ + switch (current_cpu_type()) { + case CPU_LOONGSON2: + write_c0_diag(4); + break; + default: + break; + } +} -#endif +static inline void flush_itlb_vm(struct vm_area_struct *vma) +{ + if (vma->vm_flags & VM_EXEC) + flush_itlb(); +} void local_flush_tlb_all(void) { @@ -93,7 +98,7 @@ void local_flush_tlb_all(void) } tlbw_use_hazard(); write_c0_entryhi(old_ctx); - FLUSH_ITLB; + flush_itlb(); EXIT_CRITICAL(flags); } EXPORT_SYMBOL(local_flush_tlb_all); @@ -155,7 +160,7 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, } else { drop_mmu_context(mm, cpu); } - FLUSH_ITLB; + flush_itlb(); EXIT_CRITICAL(flags); } } @@ -197,7 +202,7 @@ void local_flush_tlb_kernel_range(unsigned long start, unsigned long end) } else { local_flush_tlb_all(); } - FLUSH_ITLB; + flush_itlb(); EXIT_CRITICAL(flags); } @@ -230,7 +235,7 @@ void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page) finish: write_c0_entryhi(oldpid); - FLUSH_ITLB_VM(vma); + flush_itlb_vm(vma); EXIT_CRITICAL(flags); } } @@ -262,7 +267,7 @@ void local_flush_tlb_one(unsigned long page) tlbw_use_hazard(); } write_c0_entryhi(oldpid); - FLUSH_ITLB; + flush_itlb(); EXIT_CRITICAL(flags); } @@ -335,7 +340,7 @@ void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte) tlb_write_indexed(); } tlbw_use_hazard(); - FLUSH_ITLB_VM(vma); + flush_itlb_vm(vma); EXIT_CRITICAL(flags); } diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index 9bb3a9363b0..183f2b583e4 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -340,10 +340,6 @@ static struct work_registers build_get_work_registers(u32 **p) { struct work_registers r; - int smp_processor_id_reg; - int smp_processor_id_sel; - int smp_processor_id_shift; - if (scratch_reg >= 0) { /* Save in CPU local C0_KScratch? */ UASM_i_MTC0(p, 1, c0_kscratch(), scratch_reg); @@ -354,25 +350,9 @@ static struct work_registers build_get_work_registers(u32 **p) } if (num_possible_cpus() > 1) { -#ifdef CONFIG_MIPS_PGD_C0_CONTEXT - smp_processor_id_shift = 51; - smp_processor_id_reg = 20; /* XContext */ - smp_processor_id_sel = 0; -#else -# ifdef CONFIG_32BIT - smp_processor_id_shift = 25; - smp_processor_id_reg = 4; /* Context */ - smp_processor_id_sel = 0; -# endif -# ifdef CONFIG_64BIT - smp_processor_id_shift = 26; - smp_processor_id_reg = 4; /* Context */ - smp_processor_id_sel = 0; -# endif -#endif /* Get smp_processor_id */ - UASM_i_MFC0(p, K0, smp_processor_id_reg, smp_processor_id_sel); - UASM_i_SRL_SAFE(p, K0, K0, smp_processor_id_shift); + UASM_i_CPUID_MFC0(p, K0, SMP_CPUID_REG); + UASM_i_SRL_SAFE(p, K0, K0, SMP_CPUID_REGSHIFT); /* handler_reg_save index in K0 */ UASM_i_SLL(p, K0, K0, ilog2(sizeof(struct tlb_reg_save))); @@ -819,11 +799,11 @@ build_get_pmde64(u32 **p, struct uasm_label **l, struct uasm_reloc **r, } /* No uasm_i_nop needed here, since the next insn doesn't touch TMP. */ -#ifdef CONFIG_MIPS_PGD_C0_CONTEXT if (pgd_reg != -1) { /* pgd is in pgd_reg */ UASM_i_MFC0(p, ptr, c0_kscratch(), pgd_reg); } else { +#if defined(CONFIG_MIPS_PGD_C0_CONTEXT) /* * &pgd << 11 stored in CONTEXT [23..63]. */ @@ -835,30 +815,18 @@ build_get_pmde64(u32 **p, struct uasm_label **l, struct uasm_reloc **r, /* 1 0 1 0 1 << 6 xkphys cached */ uasm_i_ori(p, ptr, ptr, 0x540); uasm_i_drotr(p, ptr, ptr, 11); - } #elif defined(CONFIG_SMP) -# ifdef CONFIG_MIPS_MT_SMTC - /* - * SMTC uses TCBind value as "CPU" index - */ - uasm_i_mfc0(p, ptr, C0_TCBIND); - uasm_i_dsrl_safe(p, ptr, ptr, 19); -# else - /* - * 64 bit SMP running in XKPHYS has smp_processor_id() << 3 - * stored in CONTEXT. - */ - uasm_i_dmfc0(p, ptr, C0_CONTEXT); - uasm_i_dsrl_safe(p, ptr, ptr, 23); -# endif - UASM_i_LA_mostly(p, tmp, pgdc); - uasm_i_daddu(p, ptr, ptr, tmp); - uasm_i_dmfc0(p, tmp, C0_BADVADDR); - uasm_i_ld(p, ptr, uasm_rel_lo(pgdc), ptr); + UASM_i_CPUID_MFC0(p, ptr, SMP_CPUID_REG); + uasm_i_dsrl_safe(p, ptr, ptr, SMP_CPUID_PTRSHIFT); + UASM_i_LA_mostly(p, tmp, pgdc); + uasm_i_daddu(p, ptr, ptr, tmp); + uasm_i_dmfc0(p, tmp, C0_BADVADDR); + uasm_i_ld(p, ptr, uasm_rel_lo(pgdc), ptr); #else - UASM_i_LA_mostly(p, ptr, pgdc); - uasm_i_ld(p, ptr, uasm_rel_lo(pgdc), ptr); + UASM_i_LA_mostly(p, ptr, pgdc); + uasm_i_ld(p, ptr, uasm_rel_lo(pgdc), ptr); #endif + } uasm_l_vmalloc_done(l, *p); @@ -953,31 +921,25 @@ build_get_pgd_vmalloc64(u32 **p, struct uasm_label **l, struct uasm_reloc **r, static void __maybe_unused build_get_pgde32(u32 **p, unsigned int tmp, unsigned int ptr) { - long pgdc = (long)pgd_current; + if (pgd_reg != -1) { + /* pgd is in pgd_reg */ + uasm_i_mfc0(p, ptr, c0_kscratch(), pgd_reg); + uasm_i_mfc0(p, tmp, C0_BADVADDR); /* get faulting address */ + } else { + long pgdc = (long)pgd_current; - /* 32 bit SMP has smp_processor_id() stored in CONTEXT. */ + /* 32 bit SMP has smp_processor_id() stored in CONTEXT. */ #ifdef CONFIG_SMP -#ifdef CONFIG_MIPS_MT_SMTC - /* - * SMTC uses TCBind value as "CPU" index - */ - uasm_i_mfc0(p, ptr, C0_TCBIND); - UASM_i_LA_mostly(p, tmp, pgdc); - uasm_i_srl(p, ptr, ptr, 19); -#else - /* - * smp_processor_id() << 2 is stored in CONTEXT. - */ - uasm_i_mfc0(p, ptr, C0_CONTEXT); - UASM_i_LA_mostly(p, tmp, pgdc); - uasm_i_srl(p, ptr, ptr, 23); -#endif - uasm_i_addu(p, ptr, tmp, ptr); + uasm_i_mfc0(p, ptr, SMP_CPUID_REG); + UASM_i_LA_mostly(p, tmp, pgdc); + uasm_i_srl(p, ptr, ptr, SMP_CPUID_PTRSHIFT); + uasm_i_addu(p, ptr, tmp, ptr); #else - UASM_i_LA_mostly(p, ptr, pgdc); + UASM_i_LA_mostly(p, ptr, pgdc); #endif - uasm_i_mfc0(p, tmp, C0_BADVADDR); /* get faulting address */ - uasm_i_lw(p, ptr, uasm_rel_lo(pgdc), ptr); + uasm_i_mfc0(p, tmp, C0_BADVADDR); /* get faulting address */ + uasm_i_lw(p, ptr, uasm_rel_lo(pgdc), ptr); + } uasm_i_srl(p, tmp, tmp, PGDIR_SHIFT); /* get pgd only bits */ uasm_i_sll(p, tmp, tmp, PGD_T_LOG2); uasm_i_addu(p, ptr, ptr, tmp); /* add in pgd offset */ @@ -1349,95 +1311,100 @@ static void build_r4000_tlb_refill_handler(void) * need three, with the second nop'ed and the third being * unused. */ - /* Loongson2 ebase is different than r4k, we have more space */ -#if defined(CONFIG_32BIT) || defined(CONFIG_CPU_LOONGSON2) - if ((p - tlb_handler) > 64) - panic("TLB refill handler space exceeded"); -#else - if (((p - tlb_handler) > (MIPS64_REFILL_INSNS * 2) - 1) - || (((p - tlb_handler) > (MIPS64_REFILL_INSNS * 2) - 3) - && uasm_insn_has_bdelay(relocs, - tlb_handler + MIPS64_REFILL_INSNS - 3))) - panic("TLB refill handler space exceeded"); -#endif - - /* - * Now fold the handler in the TLB refill handler space. - */ -#if defined(CONFIG_32BIT) || defined(CONFIG_CPU_LOONGSON2) - f = final_handler; - /* Simplest case, just copy the handler. */ - uasm_copy_handler(relocs, labels, tlb_handler, p, f); - final_len = p - tlb_handler; -#else /* CONFIG_64BIT */ - f = final_handler + MIPS64_REFILL_INSNS; - if ((p - tlb_handler) <= MIPS64_REFILL_INSNS) { - /* Just copy the handler. */ - uasm_copy_handler(relocs, labels, tlb_handler, p, f); - final_len = p - tlb_handler; - } else { -#ifdef CONFIG_MIPS_HUGE_TLB_SUPPORT - const enum label_id ls = label_tlb_huge_update; -#else - const enum label_id ls = label_vmalloc; -#endif - u32 *split; - int ov = 0; - int i; - - for (i = 0; i < ARRAY_SIZE(labels) && labels[i].lab != ls; i++) - ; - BUG_ON(i == ARRAY_SIZE(labels)); - split = labels[i].addr; - - /* - * See if we have overflown one way or the other. - */ - if (split > tlb_handler + MIPS64_REFILL_INSNS || - split < p - MIPS64_REFILL_INSNS) - ov = 1; - - if (ov) { + switch (boot_cpu_type()) { + default: + if (sizeof(long) == 4) { + case CPU_LOONGSON2: + /* Loongson2 ebase is different than r4k, we have more space */ + if ((p - tlb_handler) > 64) + panic("TLB refill handler space exceeded"); /* - * Split two instructions before the end. One - * for the branch and one for the instruction - * in the delay slot. + * Now fold the handler in the TLB refill handler space. */ - split = tlb_handler + MIPS64_REFILL_INSNS - 2; - + f = final_handler; + /* Simplest case, just copy the handler. */ + uasm_copy_handler(relocs, labels, tlb_handler, p, f); + final_len = p - tlb_handler; + break; + } else { + if (((p - tlb_handler) > (MIPS64_REFILL_INSNS * 2) - 1) + || (((p - tlb_handler) > (MIPS64_REFILL_INSNS * 2) - 3) + && uasm_insn_has_bdelay(relocs, + tlb_handler + MIPS64_REFILL_INSNS - 3))) + panic("TLB refill handler space exceeded"); /* - * If the branch would fall in a delay slot, - * we must back up an additional instruction - * so that it is no longer in a delay slot. + * Now fold the handler in the TLB refill handler space. */ - if (uasm_insn_has_bdelay(relocs, split - 1)) - split--; - } - /* Copy first part of the handler. */ - uasm_copy_handler(relocs, labels, tlb_handler, split, f); - f += split - tlb_handler; - - if (ov) { - /* Insert branch. */ - uasm_l_split(&l, final_handler); - uasm_il_b(&f, &r, label_split); - if (uasm_insn_has_bdelay(relocs, split)) - uasm_i_nop(&f); - else { - uasm_copy_handler(relocs, labels, - split, split + 1, f); - uasm_move_labels(labels, f, f + 1, -1); - f++; - split++; + f = final_handler + MIPS64_REFILL_INSNS; + if ((p - tlb_handler) <= MIPS64_REFILL_INSNS) { + /* Just copy the handler. */ + uasm_copy_handler(relocs, labels, tlb_handler, p, f); + final_len = p - tlb_handler; + } else { +#ifdef CONFIG_MIPS_HUGE_TLB_SUPPORT + const enum label_id ls = label_tlb_huge_update; +#else + const enum label_id ls = label_vmalloc; +#endif + u32 *split; + int ov = 0; + int i; + + for (i = 0; i < ARRAY_SIZE(labels) && labels[i].lab != ls; i++) + ; + BUG_ON(i == ARRAY_SIZE(labels)); + split = labels[i].addr; + + /* + * See if we have overflown one way or the other. + */ + if (split > tlb_handler + MIPS64_REFILL_INSNS || + split < p - MIPS64_REFILL_INSNS) + ov = 1; + + if (ov) { + /* + * Split two instructions before the end. One + * for the branch and one for the instruction + * in the delay slot. + */ + split = tlb_handler + MIPS64_REFILL_INSNS - 2; + + /* + * If the branch would fall in a delay slot, + * we must back up an additional instruction + * so that it is no longer in a delay slot. + */ + if (uasm_insn_has_bdelay(relocs, split - 1)) + split--; + } + /* Copy first part of the handler. */ + uasm_copy_handler(relocs, labels, tlb_handler, split, f); + f += split - tlb_handler; + + if (ov) { + /* Insert branch. */ + uasm_l_split(&l, final_handler); + uasm_il_b(&f, &r, label_split); + if (uasm_insn_has_bdelay(relocs, split)) + uasm_i_nop(&f); + else { + uasm_copy_handler(relocs, labels, + split, split + 1, f); + uasm_move_labels(labels, f, f + 1, -1); + f++; + split++; + } + } + + /* Copy the rest of the handler. */ + uasm_copy_handler(relocs, labels, split, p, final_handler); + final_len = (f - (final_handler + MIPS64_REFILL_INSNS)) + + (p - split); } } - - /* Copy the rest of the handler. */ - uasm_copy_handler(relocs, labels, split, p, final_handler); - final_len = (f - (final_handler + MIPS64_REFILL_INSNS)) + - (p - split); + break; } -#endif /* CONFIG_64BIT */ uasm_resolve_relocs(relocs, labels); pr_debug("Wrote TLB refill handler (%u instructions).\n", @@ -1451,28 +1418,30 @@ static void build_r4000_tlb_refill_handler(void) extern u32 handle_tlbl[], handle_tlbl_end[]; extern u32 handle_tlbs[], handle_tlbs_end[]; extern u32 handle_tlbm[], handle_tlbm_end[]; - -#ifdef CONFIG_MIPS_PGD_C0_CONTEXT extern u32 tlbmiss_handler_setup_pgd[], tlbmiss_handler_setup_pgd_end[]; -static void build_r4000_setup_pgd(void) +static void build_setup_pgd(void) { const int a0 = 4; - const int a1 = 5; + const int __maybe_unused a1 = 5; + const int __maybe_unused a2 = 6; u32 *p = tlbmiss_handler_setup_pgd; const int tlbmiss_handler_setup_pgd_size = tlbmiss_handler_setup_pgd_end - tlbmiss_handler_setup_pgd; - struct uasm_label *l = labels; - struct uasm_reloc *r = relocs; +#ifndef CONFIG_MIPS_PGD_C0_CONTEXT + long pgdc = (long)pgd_current; +#endif memset(tlbmiss_handler_setup_pgd, 0, tlbmiss_handler_setup_pgd_size * sizeof(tlbmiss_handler_setup_pgd[0])); memset(labels, 0, sizeof(labels)); memset(relocs, 0, sizeof(relocs)); - pgd_reg = allocate_kscratch(); - +#ifdef CONFIG_MIPS_PGD_C0_CONTEXT if (pgd_reg == -1) { + struct uasm_label *l = labels; + struct uasm_reloc *r = relocs; + /* PGD << 11 in c0_Context */ /* * If it is a ckseg0 address, convert to a physical @@ -1494,6 +1463,26 @@ static void build_r4000_setup_pgd(void) uasm_i_jr(&p, 31); UASM_i_MTC0(&p, a0, c0_kscratch(), pgd_reg); } +#else +#ifdef CONFIG_SMP + /* Save PGD to pgd_current[smp_processor_id()] */ + UASM_i_CPUID_MFC0(&p, a1, SMP_CPUID_REG); + UASM_i_SRL_SAFE(&p, a1, a1, SMP_CPUID_PTRSHIFT); + UASM_i_LA_mostly(&p, a2, pgdc); + UASM_i_ADDU(&p, a2, a2, a1); + UASM_i_SW(&p, a0, uasm_rel_lo(pgdc), a2); +#else + UASM_i_LA_mostly(&p, a2, pgdc); + UASM_i_SW(&p, a0, uasm_rel_lo(pgdc), a2); +#endif /* SMP */ + uasm_i_jr(&p, 31); + + /* if pgd_reg is allocated, save PGD also to scratch register */ + if (pgd_reg != -1) + UASM_i_MTC0(&p, a0, c0_kscratch(), pgd_reg); + else + uasm_i_nop(&p); +#endif if (p >= tlbmiss_handler_setup_pgd_end) panic("tlbmiss_handler_setup_pgd space exceeded"); @@ -1504,7 +1493,6 @@ static void build_r4000_setup_pgd(void) dump_handler("tlbmiss_handler", tlbmiss_handler_setup_pgd, tlbmiss_handler_setup_pgd_size); } -#endif static void iPTE_LW(u32 **p, unsigned int pte, unsigned int ptr) @@ -2197,10 +2185,8 @@ static void flush_tlb_handlers(void) (unsigned long)handle_tlbs_end); local_flush_icache_range((unsigned long)handle_tlbm, (unsigned long)handle_tlbm_end); -#ifdef CONFIG_MIPS_PGD_C0_CONTEXT local_flush_icache_range((unsigned long)tlbmiss_handler_setup_pgd, (unsigned long)tlbmiss_handler_setup_pgd_end); -#endif } void build_tlb_refill_handler(void) @@ -2232,6 +2218,7 @@ void build_tlb_refill_handler(void) if (!run_once) { if (!cpu_has_local_ebase) build_r3000_tlb_refill_handler(); + build_setup_pgd(); build_r3000_tlb_load_handler(); build_r3000_tlb_store_handler(); build_r3000_tlb_modify_handler(); @@ -2255,9 +2242,7 @@ void build_tlb_refill_handler(void) default: if (!run_once) { scratch_reg = allocate_kscratch(); -#ifdef CONFIG_MIPS_PGD_C0_CONTEXT - build_r4000_setup_pgd(); -#endif + build_setup_pgd(); build_r4000_tlb_load_handler(); build_r4000_tlb_store_handler(); build_r4000_tlb_modify_handler(); diff --git a/arch/mips/mti-malta/malta-int.c b/arch/mips/mti-malta/malta-int.c index c69da373469..0892575f829 100644 --- a/arch/mips/mti-malta/malta-int.c +++ b/arch/mips/mti-malta/malta-int.c @@ -37,7 +37,6 @@ #include <asm/irq_regs.h> #include <asm/mips-boards/malta.h> #include <asm/mips-boards/maltaint.h> -#include <asm/mips-boards/piix4.h> #include <asm/gt64120.h> #include <asm/mips-boards/generic.h> #include <asm/mips-boards/msc01_pci.h> @@ -473,7 +472,7 @@ static void __init fill_ipi_map(void) { int cpu; - for (cpu = 0; cpu < NR_CPUS; cpu++) { + for (cpu = 0; cpu < nr_cpu_ids; cpu++) { fill_ipi_map1(gic_resched_int_base, cpu, GIC_CPU_INT1); fill_ipi_map1(gic_call_int_base, cpu, GIC_CPU_INT2); } @@ -574,8 +573,9 @@ void __init arch_init_irq(void) /* FIXME */ int i; #if defined(CONFIG_MIPS_MT_SMP) - gic_call_int_base = GIC_NUM_INTRS - NR_CPUS; - gic_resched_int_base = gic_call_int_base - NR_CPUS; + gic_call_int_base = GIC_NUM_INTRS - + (NR_CPUS - nr_cpu_ids) * 2 - nr_cpu_ids; + gic_resched_int_base = gic_call_int_base - nr_cpu_ids; fill_ipi_map(); #endif gic_init(GIC_BASE_ADDR, GIC_ADDRSPACE_SZ, gic_intr_map, @@ -599,7 +599,7 @@ void __init arch_init_irq(void) printk("CPU%d: status register now %08x\n", smp_processor_id(), read_c0_status()); write_c0_status(0x1100dc00); printk("CPU%d: status register frc %08x\n", smp_processor_id(), read_c0_status()); - for (i = 0; i < NR_CPUS; i++) { + for (i = 0; i < nr_cpu_ids; i++) { arch_init_ipiirq(MIPS_GIC_IRQ_BASE + GIC_RESCHED_INT(i), &irq_resched); arch_init_ipiirq(MIPS_GIC_IRQ_BASE + diff --git a/arch/mips/netlogic/common/smp.c b/arch/mips/netlogic/common/smp.c index 6f8feb9efcf..c0eded01fde 100644 --- a/arch/mips/netlogic/common/smp.c +++ b/arch/mips/netlogic/common/smp.c @@ -245,7 +245,7 @@ static int nlm_parse_cpumask(cpumask_t *wakeup_mask) return threadmode; unsupp: - panic("Unsupported CPU mask %lx\n", + panic("Unsupported CPU mask %lx", (unsigned long)cpumask_bits(wakeup_mask)[0]); return 0; } diff --git a/arch/mips/pci/fixup-malta.c b/arch/mips/pci/fixup-malta.c index 07ada7f8441..df36e2327c5 100644 --- a/arch/mips/pci/fixup-malta.c +++ b/arch/mips/pci/fixup-malta.c @@ -1,5 +1,6 @@ #include <linux/init.h> #include <linux/pci.h> +#include <asm/mips-boards/piix4.h> /* PCI interrupt pins */ #define PCIA 1 @@ -53,7 +54,8 @@ int pcibios_plat_dev_init(struct pci_dev *dev) static void malta_piix_func0_fixup(struct pci_dev *pdev) { unsigned char reg_val; - static int piixirqmap[16] = { /* PIIX PIRQC[A:D] irq mappings */ + /* PIIX PIRQC[A:D] irq mappings */ + static int piixirqmap[PIIX4_FUNC0_PIRQRC_IRQ_ROUTING_MAX] = { 0, 0, 0, 3, 4, 5, 6, 7, 0, 9, 10, 11, @@ -63,11 +65,12 @@ static void malta_piix_func0_fixup(struct pci_dev *pdev) /* Interrogate PIIX4 to get PCI IRQ mapping */ for (i = 0; i <= 3; i++) { - pci_read_config_byte(pdev, 0x60+i, ®_val); - if (reg_val & 0x80) + pci_read_config_byte(pdev, PIIX4_FUNC0_PIRQRC+i, ®_val); + if (reg_val & PIIX4_FUNC0_PIRQRC_IRQ_ROUTING_DISABLE) pci_irq[PCIA+i] = 0; /* Disabled */ else - pci_irq[PCIA+i] = piixirqmap[reg_val & 15]; + pci_irq[PCIA+i] = piixirqmap[reg_val & + PIIX4_FUNC0_PIRQRC_IRQ_ROUTING_MASK]; } /* Done by YAMON 2.00 onwards */ @@ -76,8 +79,9 @@ static void malta_piix_func0_fixup(struct pci_dev *pdev) * Set top of main memory accessible by ISA or DMA * devices to 16 Mb. */ - pci_read_config_byte(pdev, 0x69, ®_val); - pci_write_config_byte(pdev, 0x69, reg_val | 0xf0); + pci_read_config_byte(pdev, PIIX4_FUNC0_TOM, ®_val); + pci_write_config_byte(pdev, PIIX4_FUNC0_TOM, reg_val | + PIIX4_FUNC0_TOM_TOP_OF_MEMORY_MASK); } } @@ -93,10 +97,14 @@ static void malta_piix_func1_fixup(struct pci_dev *pdev) /* * IDE Decode enable. */ - pci_read_config_byte(pdev, 0x41, ®_val); - pci_write_config_byte(pdev, 0x41, reg_val|0x80); - pci_read_config_byte(pdev, 0x43, ®_val); - pci_write_config_byte(pdev, 0x43, reg_val|0x80); + pci_read_config_byte(pdev, PIIX4_FUNC1_IDETIM_PRIMARY_HI, + ®_val); + pci_write_config_byte(pdev, PIIX4_FUNC1_IDETIM_PRIMARY_HI, + reg_val|PIIX4_FUNC1_IDETIM_PRIMARY_HI_IDE_DECODE_EN); + pci_read_config_byte(pdev, PIIX4_FUNC1_IDETIM_SECONDARY_HI, + ®_val); + pci_write_config_byte(pdev, PIIX4_FUNC1_IDETIM_SECONDARY_HI, + reg_val|PIIX4_FUNC1_IDETIM_SECONDARY_HI_IDE_DECODE_EN); } } @@ -108,10 +116,12 @@ static void quirk_dlcsetup(struct pci_dev *dev) { u8 odlc, ndlc; - (void) pci_read_config_byte(dev, 0x82, &odlc); + (void) pci_read_config_byte(dev, PIIX4_FUNC0_DLC, &odlc); /* Enable passive releases and delayed transaction */ - ndlc = odlc | 7; - (void) pci_write_config_byte(dev, 0x82, ndlc); + ndlc = odlc | PIIX4_FUNC0_DLC_USBPR_EN | + PIIX4_FUNC0_DLC_PASSIVE_RELEASE_EN | + PIIX4_FUNC0_DLC_DELAYED_TRANSACTION_EN; + (void) pci_write_config_byte(dev, PIIX4_FUNC0_DLC, ndlc); } DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_0, diff --git a/arch/mips/pci/pci-ar71xx.c b/arch/mips/pci/pci-ar71xx.c index 18517dd0f70..d471a26dd5f 100644 --- a/arch/mips/pci/pci-ar71xx.c +++ b/arch/mips/pci/pci-ar71xx.c @@ -363,9 +363,6 @@ static int ar71xx_pci_probe(struct platform_device *pdev) spin_lock_init(&apc->lock); res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cfg_base"); - if (!res) - return -EINVAL; - apc->cfg_base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(apc->cfg_base)) return PTR_ERR(apc->cfg_base); diff --git a/arch/mips/pci/pci-ar724x.c b/arch/mips/pci/pci-ar724x.c index 65ec032fa0b..785b2659b51 100644 --- a/arch/mips/pci/pci-ar724x.c +++ b/arch/mips/pci/pci-ar724x.c @@ -362,25 +362,16 @@ static int ar724x_pci_probe(struct platform_device *pdev) return -ENOMEM; res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ctrl_base"); - if (!res) - return -EINVAL; - apc->ctrl_base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(apc->ctrl_base)) return PTR_ERR(apc->ctrl_base); res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cfg_base"); - if (!res) - return -EINVAL; - apc->devcfg_base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(apc->devcfg_base)) return PTR_ERR(apc->devcfg_base); res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "crp_base"); - if (!res) - return -EINVAL; - apc->crp_base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(apc->crp_base)) return PTR_ERR(apc->crp_base); diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c index 33e7aa52d9c..1bf60b12737 100644 --- a/arch/mips/pci/pci.c +++ b/arch/mips/pci/pci.c @@ -120,51 +120,37 @@ static void pcibios_scanbus(struct pci_controller *hose) #ifdef CONFIG_OF void pci_load_of_ranges(struct pci_controller *hose, struct device_node *node) { - const __be32 *ranges; - int rlen; - int pna = of_n_addr_cells(node); - int np = pna + 5; + struct of_pci_range range; + struct of_pci_range_parser parser; pr_info("PCI host bridge %s ranges:\n", node->full_name); - ranges = of_get_property(node, "ranges", &rlen); - if (ranges == NULL) - return; hose->of_node = node; - while ((rlen -= np * 4) >= 0) { - u32 pci_space; + if (of_pci_range_parser_init(&parser, node)) + return; + + for_each_of_pci_range(&parser, &range) { struct resource *res = NULL; - u64 addr, size; - - pci_space = be32_to_cpup(&ranges[0]); - addr = of_translate_address(node, ranges + 3); - size = of_read_number(ranges + pna + 3, 2); - ranges += np; - switch ((pci_space >> 24) & 0x3) { - case 1: /* PCI IO space */ + + switch (range.flags & IORESOURCE_TYPE_BITS) { + case IORESOURCE_IO: pr_info(" IO 0x%016llx..0x%016llx\n", - addr, addr + size - 1); + range.cpu_addr, + range.cpu_addr + range.size - 1); hose->io_map_base = - (unsigned long)ioremap(addr, size); + (unsigned long)ioremap(range.cpu_addr, + range.size); res = hose->io_resource; - res->flags = IORESOURCE_IO; break; - case 2: /* PCI Memory space */ - case 3: /* PCI 64 bits Memory space */ + case IORESOURCE_MEM: pr_info(" MEM 0x%016llx..0x%016llx\n", - addr, addr + size - 1); + range.cpu_addr, + range.cpu_addr + range.size - 1); res = hose->mem_resource; - res->flags = IORESOURCE_MEM; break; } - if (res != NULL) { - res->start = addr; - res->name = node->full_name; - res->end = res->start + size - 1; - res->parent = NULL; - res->sibling = NULL; - res->child = NULL; - } + if (res != NULL) + of_pci_range_to_resource(&range, node, res); } } diff --git a/arch/mips/powertv/Kconfig b/arch/mips/powertv/Kconfig deleted file mode 100644 index dd91fbacbcb..00000000000 --- a/arch/mips/powertv/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -config BOOTLOADER_FAMILY - string "POWERTV Bootloader Family string" - default "85" - depends on POWERTV - help - This value should be specified when the bootloader driver is disabled - and must be exactly two characters long. Families supported are: - R1 - RNG-100 R2 - RNG-200 - A1 - Class A B1 - Class B - E1 - Class E F1 - Class F - 44 - 45xx 46 - 46xx - 85 - 85xx 86 - 86xx diff --git a/arch/mips/powertv/Makefile b/arch/mips/powertv/Makefile deleted file mode 100644 index 39ca9f8d63a..00000000000 --- a/arch/mips/powertv/Makefile +++ /dev/null @@ -1,29 +0,0 @@ -# -# Carsten Langgaard, carstenl@mips.com -# Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. -# -# Carsten Langgaard, carstenl@mips.com -# Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. -# Portions copyright (C) 2009 Cisco Systems, Inc. -# -# This program is free software; you can distribute it and/or modify it -# under the terms of the GNU General Public License (Version 2) as -# published by the Free Software Foundation. -# -# This program is distributed in the hope it will be useful, but WITHOUT -# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -# for more details. -# -# You should have received a copy of the GNU General Public License along -# with this program; if not, write to the Free Software Foundation, Inc., -# 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -# -# Makefile for the Cisco PowerTV-specific kernel interface routines -# under Linux. -# - -obj-y += init.o ioremap.o memory.o powertv_setup.o reset.o time.o \ - asic/ pci/ - -obj-$(CONFIG_USB) += powertv-usb.o diff --git a/arch/mips/powertv/Platform b/arch/mips/powertv/Platform deleted file mode 100644 index 4eb5af1d8ee..00000000000 --- a/arch/mips/powertv/Platform +++ /dev/null @@ -1,7 +0,0 @@ -# -# Cisco PowerTV Platform -# -platform-$(CONFIG_POWERTV) += powertv/ -cflags-$(CONFIG_POWERTV) += \ - -I$(srctree)/arch/mips/include/asm/mach-powertv -load-$(CONFIG_POWERTV) += 0xffffffff90800000 diff --git a/arch/mips/powertv/asic/Makefile b/arch/mips/powertv/asic/Makefile deleted file mode 100644 index 35dcc53eb25..00000000000 --- a/arch/mips/powertv/asic/Makefile +++ /dev/null @@ -1,21 +0,0 @@ -# -# Copyright (C) 2009 Scientific-Atlanta, Inc. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -# - -obj-y += asic-calliope.o asic-cronus.o asic-gaia.o asic-zeus.o \ - asic_devices.o asic_int.o irq_asic.o prealloc-calliope.o \ - prealloc-cronus.o prealloc-cronuslite.o prealloc-gaia.o prealloc-zeus.o diff --git a/arch/mips/powertv/asic/asic-calliope.c b/arch/mips/powertv/asic/asic-calliope.c deleted file mode 100644 index 2f539b43f56..00000000000 --- a/arch/mips/powertv/asic/asic-calliope.c +++ /dev/null @@ -1,101 +0,0 @@ -/* - * Locations of devices in the Calliope ASIC. - * - * Copyright (C) 2005-2009 Scientific-Atlanta, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - * - * Author: Ken Eppinett - * David Schleef <ds@schleef.org> - * - * Description: Defines the platform resources for the SA settop. - */ - -#include <linux/init.h> -#include <asm/mach-powertv/asic.h> - -#define CALLIOPE_ADDR(x) (CALLIOPE_IO_BASE + (x)) - -const struct register_map calliope_register_map __initconst = { - .eic_slow0_strt_add = {.phys = CALLIOPE_ADDR(0x800000)}, - .eic_cfg_bits = {.phys = CALLIOPE_ADDR(0x800038)}, - .eic_ready_status = {.phys = CALLIOPE_ADDR(0x80004c)}, - - .chipver3 = {.phys = CALLIOPE_ADDR(0xA00800)}, - .chipver2 = {.phys = CALLIOPE_ADDR(0xA00804)}, - .chipver1 = {.phys = CALLIOPE_ADDR(0xA00808)}, - .chipver0 = {.phys = CALLIOPE_ADDR(0xA0080c)}, - - /* The registers of IRBlaster */ - .uart1_intstat = {.phys = CALLIOPE_ADDR(0xA01800)}, - .uart1_inten = {.phys = CALLIOPE_ADDR(0xA01804)}, - .uart1_config1 = {.phys = CALLIOPE_ADDR(0xA01808)}, - .uart1_config2 = {.phys = CALLIOPE_ADDR(0xA0180C)}, - .uart1_divisorhi = {.phys = CALLIOPE_ADDR(0xA01810)}, - .uart1_divisorlo = {.phys = CALLIOPE_ADDR(0xA01814)}, - .uart1_data = {.phys = CALLIOPE_ADDR(0xA01818)}, - .uart1_status = {.phys = CALLIOPE_ADDR(0xA0181C)}, - - .int_stat_3 = {.phys = CALLIOPE_ADDR(0xA02800)}, - .int_stat_2 = {.phys = CALLIOPE_ADDR(0xA02804)}, - .int_stat_1 = {.phys = CALLIOPE_ADDR(0xA02808)}, - .int_stat_0 = {.phys = CALLIOPE_ADDR(0xA0280c)}, - .int_config = {.phys = CALLIOPE_ADDR(0xA02810)}, - .int_int_scan = {.phys = CALLIOPE_ADDR(0xA02818)}, - .ien_int_3 = {.phys = CALLIOPE_ADDR(0xA02830)}, - .ien_int_2 = {.phys = CALLIOPE_ADDR(0xA02834)}, - .ien_int_1 = {.phys = CALLIOPE_ADDR(0xA02838)}, - .ien_int_0 = {.phys = CALLIOPE_ADDR(0xA0283c)}, - .int_level_3_3 = {.phys = CALLIOPE_ADDR(0xA02880)}, - .int_level_3_2 = {.phys = CALLIOPE_ADDR(0xA02884)}, - .int_level_3_1 = {.phys = CALLIOPE_ADDR(0xA02888)}, - .int_level_3_0 = {.phys = CALLIOPE_ADDR(0xA0288c)}, - .int_level_2_3 = {.phys = CALLIOPE_ADDR(0xA02890)}, - .int_level_2_2 = {.phys = CALLIOPE_ADDR(0xA02894)}, - .int_level_2_1 = {.phys = CALLIOPE_ADDR(0xA02898)}, - .int_level_2_0 = {.phys = CALLIOPE_ADDR(0xA0289c)}, - .int_level_1_3 = {.phys = CALLIOPE_ADDR(0xA028a0)}, - .int_level_1_2 = {.phys = CALLIOPE_ADDR(0xA028a4)}, - .int_level_1_1 = {.phys = CALLIOPE_ADDR(0xA028a8)}, - .int_level_1_0 = {.phys = CALLIOPE_ADDR(0xA028ac)}, - .int_level_0_3 = {.phys = CALLIOPE_ADDR(0xA028b0)}, - .int_level_0_2 = {.phys = CALLIOPE_ADDR(0xA028b4)}, - .int_level_0_1 = {.phys = CALLIOPE_ADDR(0xA028b8)}, - .int_level_0_0 = {.phys = CALLIOPE_ADDR(0xA028bc)}, - .int_docsis_en = {.phys = CALLIOPE_ADDR(0xA028F4)}, - - .mips_pll_setup = {.phys = CALLIOPE_ADDR(0x980000)}, - .fs432x4b4_usb_ctl = {.phys = CALLIOPE_ADDR(0x980030)}, - .test_bus = {.phys = CALLIOPE_ADDR(0x9800CC)}, - .crt_spare = {.phys = CALLIOPE_ADDR(0x9800d4)}, - .usb2_ohci_int_mask = {.phys = CALLIOPE_ADDR(0x9A000c)}, - .usb2_strap = {.phys = CALLIOPE_ADDR(0x9A0014)}, - .ehci_hcapbase = {.phys = CALLIOPE_ADDR(0x9BFE00)}, - .ohci_hc_revision = {.phys = CALLIOPE_ADDR(0x9BFC00)}, - .bcm1_bs_lmi_steer = {.phys = CALLIOPE_ADDR(0x9E0004)}, - .usb2_control = {.phys = CALLIOPE_ADDR(0x9E0054)}, - .usb2_stbus_obc = {.phys = CALLIOPE_ADDR(0x9BFF00)}, - .usb2_stbus_mess_size = {.phys = CALLIOPE_ADDR(0x9BFF04)}, - .usb2_stbus_chunk_size = {.phys = CALLIOPE_ADDR(0x9BFF08)}, - - .pcie_regs = {.phys = 0x000000}, /* -doesn't exist- */ - .tim_ch = {.phys = CALLIOPE_ADDR(0xA02C10)}, - .tim_cl = {.phys = CALLIOPE_ADDR(0xA02C14)}, - .gpio_dout = {.phys = CALLIOPE_ADDR(0xA02c20)}, - .gpio_din = {.phys = CALLIOPE_ADDR(0xA02c24)}, - .gpio_dir = {.phys = CALLIOPE_ADDR(0xA02c2C)}, - .watchdog = {.phys = CALLIOPE_ADDR(0xA02c30)}, - .front_panel = {.phys = 0x000000}, /* -not used- */ -}; diff --git a/arch/mips/powertv/asic/asic-cronus.c b/arch/mips/powertv/asic/asic-cronus.c deleted file mode 100644 index 7f8f3429b35..00000000000 --- a/arch/mips/powertv/asic/asic-cronus.c +++ /dev/null @@ -1,101 +0,0 @@ -/* - * Locations of devices in the Cronus ASIC - * - * Copyright (C) 2005-2009 Scientific-Atlanta, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - * - * Author: Ken Eppinett - * David Schleef <ds@schleef.org> - * - * Description: Defines the platform resources for the SA settop. - */ - -#include <linux/init.h> -#include <asm/mach-powertv/asic.h> - -#define CRONUS_ADDR(x) (CRONUS_IO_BASE + (x)) - -const struct register_map cronus_register_map __initconst = { - .eic_slow0_strt_add = {.phys = CRONUS_ADDR(0x000000)}, - .eic_cfg_bits = {.phys = CRONUS_ADDR(0x000038)}, - .eic_ready_status = {.phys = CRONUS_ADDR(0x00004C)}, - - .chipver3 = {.phys = CRONUS_ADDR(0x2A0800)}, - .chipver2 = {.phys = CRONUS_ADDR(0x2A0804)}, - .chipver1 = {.phys = CRONUS_ADDR(0x2A0808)}, - .chipver0 = {.phys = CRONUS_ADDR(0x2A080C)}, - - /* The registers of IRBlaster */ - .uart1_intstat = {.phys = CRONUS_ADDR(0x2A1800)}, - .uart1_inten = {.phys = CRONUS_ADDR(0x2A1804)}, - .uart1_config1 = {.phys = CRONUS_ADDR(0x2A1808)}, - .uart1_config2 = {.phys = CRONUS_ADDR(0x2A180C)}, - .uart1_divisorhi = {.phys = CRONUS_ADDR(0x2A1810)}, - .uart1_divisorlo = {.phys = CRONUS_ADDR(0x2A1814)}, - .uart1_data = {.phys = CRONUS_ADDR(0x2A1818)}, - .uart1_status = {.phys = CRONUS_ADDR(0x2A181C)}, - - .int_stat_3 = {.phys = CRONUS_ADDR(0x2A2800)}, - .int_stat_2 = {.phys = CRONUS_ADDR(0x2A2804)}, - .int_stat_1 = {.phys = CRONUS_ADDR(0x2A2808)}, - .int_stat_0 = {.phys = CRONUS_ADDR(0x2A280C)}, - .int_config = {.phys = CRONUS_ADDR(0x2A2810)}, - .int_int_scan = {.phys = CRONUS_ADDR(0x2A2818)}, - .ien_int_3 = {.phys = CRONUS_ADDR(0x2A2830)}, - .ien_int_2 = {.phys = CRONUS_ADDR(0x2A2834)}, - .ien_int_1 = {.phys = CRONUS_ADDR(0x2A2838)}, - .ien_int_0 = {.phys = CRONUS_ADDR(0x2A283C)}, - .int_level_3_3 = {.phys = CRONUS_ADDR(0x2A2880)}, - .int_level_3_2 = {.phys = CRONUS_ADDR(0x2A2884)}, - .int_level_3_1 = {.phys = CRONUS_ADDR(0x2A2888)}, - .int_level_3_0 = {.phys = CRONUS_ADDR(0x2A288C)}, - .int_level_2_3 = {.phys = CRONUS_ADDR(0x2A2890)}, - .int_level_2_2 = {.phys = CRONUS_ADDR(0x2A2894)}, - .int_level_2_1 = {.phys = CRONUS_ADDR(0x2A2898)}, - .int_level_2_0 = {.phys = CRONUS_ADDR(0x2A289C)}, - .int_level_1_3 = {.phys = CRONUS_ADDR(0x2A28A0)}, - .int_level_1_2 = {.phys = CRONUS_ADDR(0x2A28A4)}, - .int_level_1_1 = {.phys = CRONUS_ADDR(0x2A28A8)}, - .int_level_1_0 = {.phys = CRONUS_ADDR(0x2A28AC)}, - .int_level_0_3 = {.phys = CRONUS_ADDR(0x2A28B0)}, - .int_level_0_2 = {.phys = CRONUS_ADDR(0x2A28B4)}, - .int_level_0_1 = {.phys = CRONUS_ADDR(0x2A28B8)}, - .int_level_0_0 = {.phys = CRONUS_ADDR(0x2A28BC)}, - .int_docsis_en = {.phys = CRONUS_ADDR(0x2A28F4)}, - - .mips_pll_setup = {.phys = CRONUS_ADDR(0x1C0000)}, - .fs432x4b4_usb_ctl = {.phys = CRONUS_ADDR(0x1C0028)}, - .test_bus = {.phys = CRONUS_ADDR(0x1C00CC)}, - .crt_spare = {.phys = CRONUS_ADDR(0x1c00d4)}, - .usb2_ohci_int_mask = {.phys = CRONUS_ADDR(0x20000C)}, - .usb2_strap = {.phys = CRONUS_ADDR(0x200014)}, - .ehci_hcapbase = {.phys = CRONUS_ADDR(0x21FE00)}, - .ohci_hc_revision = {.phys = CRONUS_ADDR(0x21fc00)}, - .bcm1_bs_lmi_steer = {.phys = CRONUS_ADDR(0x2E0008)}, - .usb2_control = {.phys = CRONUS_ADDR(0x2E004C)}, - .usb2_stbus_obc = {.phys = CRONUS_ADDR(0x21FF00)}, - .usb2_stbus_mess_size = {.phys = CRONUS_ADDR(0x21FF04)}, - .usb2_stbus_chunk_size = {.phys = CRONUS_ADDR(0x21FF08)}, - - .pcie_regs = {.phys = CRONUS_ADDR(0x220000)}, - .tim_ch = {.phys = CRONUS_ADDR(0x2A2C10)}, - .tim_cl = {.phys = CRONUS_ADDR(0x2A2C14)}, - .gpio_dout = {.phys = CRONUS_ADDR(0x2A2C20)}, - .gpio_din = {.phys = CRONUS_ADDR(0x2A2C24)}, - .gpio_dir = {.phys = CRONUS_ADDR(0x2A2C2C)}, - .watchdog = {.phys = CRONUS_ADDR(0x2A2C30)}, - .front_panel = {.phys = CRONUS_ADDR(0x2A3800)}, -}; diff --git a/arch/mips/powertv/asic/asic-gaia.c b/arch/mips/powertv/asic/asic-gaia.c deleted file mode 100644 index 1265b49012e..00000000000 --- a/arch/mips/powertv/asic/asic-gaia.c +++ /dev/null @@ -1,96 +0,0 @@ -/* - * Locations of devices in the Gaia ASIC - * - * Copyright (C) 2005-2009 Scientific-Atlanta, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - * - * Author: David VomLehn - */ - -#include <linux/init.h> -#include <asm/mach-powertv/asic.h> - -const struct register_map gaia_register_map __initconst = { - .eic_slow0_strt_add = {.phys = GAIA_IO_BASE + 0x000000}, - .eic_cfg_bits = {.phys = GAIA_IO_BASE + 0x000038}, - .eic_ready_status = {.phys = GAIA_IO_BASE + 0x00004C}, - - .chipver3 = {.phys = GAIA_IO_BASE + 0x2A0800}, - .chipver2 = {.phys = GAIA_IO_BASE + 0x2A0804}, - .chipver1 = {.phys = GAIA_IO_BASE + 0x2A0808}, - .chipver0 = {.phys = GAIA_IO_BASE + 0x2A080C}, - - /* The registers of IRBlaster */ - .uart1_intstat = {.phys = GAIA_IO_BASE + 0x2A1800}, - .uart1_inten = {.phys = GAIA_IO_BASE + 0x2A1804}, - .uart1_config1 = {.phys = GAIA_IO_BASE + 0x2A1808}, - .uart1_config2 = {.phys = GAIA_IO_BASE + 0x2A180C}, - .uart1_divisorhi = {.phys = GAIA_IO_BASE + 0x2A1810}, - .uart1_divisorlo = {.phys = GAIA_IO_BASE + 0x2A1814}, - .uart1_data = {.phys = GAIA_IO_BASE + 0x2A1818}, - .uart1_status = {.phys = GAIA_IO_BASE + 0x2A181C}, - - .int_stat_3 = {.phys = GAIA_IO_BASE + 0x2A2800}, - .int_stat_2 = {.phys = GAIA_IO_BASE + 0x2A2804}, - .int_stat_1 = {.phys = GAIA_IO_BASE + 0x2A2808}, - .int_stat_0 = {.phys = GAIA_IO_BASE + 0x2A280C}, - .int_config = {.phys = GAIA_IO_BASE + 0x2A2810}, - .int_int_scan = {.phys = GAIA_IO_BASE + 0x2A2818}, - .ien_int_3 = {.phys = GAIA_IO_BASE + 0x2A2830}, - .ien_int_2 = {.phys = GAIA_IO_BASE + 0x2A2834}, - .ien_int_1 = {.phys = GAIA_IO_BASE + 0x2A2838}, - .ien_int_0 = {.phys = GAIA_IO_BASE + 0x2A283C}, - .int_level_3_3 = {.phys = GAIA_IO_BASE + 0x2A2880}, - .int_level_3_2 = {.phys = GAIA_IO_BASE + 0x2A2884}, - .int_level_3_1 = {.phys = GAIA_IO_BASE + 0x2A2888}, - .int_level_3_0 = {.phys = GAIA_IO_BASE + 0x2A288C}, - .int_level_2_3 = {.phys = GAIA_IO_BASE + 0x2A2890}, - .int_level_2_2 = {.phys = GAIA_IO_BASE + 0x2A2894}, - .int_level_2_1 = {.phys = GAIA_IO_BASE + 0x2A2898}, - .int_level_2_0 = {.phys = GAIA_IO_BASE + 0x2A289C}, - .int_level_1_3 = {.phys = GAIA_IO_BASE + 0x2A28A0}, - .int_level_1_2 = {.phys = GAIA_IO_BASE + 0x2A28A4}, - .int_level_1_1 = {.phys = GAIA_IO_BASE + 0x2A28A8}, - .int_level_1_0 = {.phys = GAIA_IO_BASE + 0x2A28AC}, - .int_level_0_3 = {.phys = GAIA_IO_BASE + 0x2A28B0}, - .int_level_0_2 = {.phys = GAIA_IO_BASE + 0x2A28B4}, - .int_level_0_1 = {.phys = GAIA_IO_BASE + 0x2A28B8}, - .int_level_0_0 = {.phys = GAIA_IO_BASE + 0x2A28BC}, - .int_docsis_en = {.phys = GAIA_IO_BASE + 0x2A28F4}, - - .mips_pll_setup = {.phys = GAIA_IO_BASE + 0x1C0000}, - .fs432x4b4_usb_ctl = {.phys = GAIA_IO_BASE + 0x1C0024}, - .test_bus = {.phys = GAIA_IO_BASE + 0x1C00CC}, - .crt_spare = {.phys = GAIA_IO_BASE + 0x1c0108}, - .usb2_ohci_int_mask = {.phys = GAIA_IO_BASE + 0x20000C}, - .usb2_strap = {.phys = GAIA_IO_BASE + 0x200014}, - .ehci_hcapbase = {.phys = GAIA_IO_BASE + 0x21FE00}, - .ohci_hc_revision = {.phys = GAIA_IO_BASE + 0x21fc00}, - .bcm1_bs_lmi_steer = {.phys = GAIA_IO_BASE + 0x2E0004}, - .usb2_control = {.phys = GAIA_IO_BASE + 0x2E004C}, - .usb2_stbus_obc = {.phys = GAIA_IO_BASE + 0x21FF00}, - .usb2_stbus_mess_size = {.phys = GAIA_IO_BASE + 0x21FF04}, - .usb2_stbus_chunk_size = {.phys = GAIA_IO_BASE + 0x21FF08}, - - .pcie_regs = {.phys = GAIA_IO_BASE + 0x220000}, - .tim_ch = {.phys = GAIA_IO_BASE + 0x2A2C10}, - .tim_cl = {.phys = GAIA_IO_BASE + 0x2A2C14}, - .gpio_dout = {.phys = GAIA_IO_BASE + 0x2A2C20}, - .gpio_din = {.phys = GAIA_IO_BASE + 0x2A2C24}, - .gpio_dir = {.phys = GAIA_IO_BASE + 0x2A2C2C}, - .watchdog = {.phys = GAIA_IO_BASE + 0x2A2C30}, - .front_panel = {.phys = GAIA_IO_BASE + 0x2A3800}, -}; diff --git a/arch/mips/powertv/asic/asic-zeus.c b/arch/mips/powertv/asic/asic-zeus.c deleted file mode 100644 index 14e7de137e0..00000000000 --- a/arch/mips/powertv/asic/asic-zeus.c +++ /dev/null @@ -1,101 +0,0 @@ -/* - * Locations of devices in the Zeus ASIC - * - * Copyright (C) 2005-2009 Scientific-Atlanta, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - * - * Author: Ken Eppinett - * David Schleef <ds@schleef.org> - * - * Description: Defines the platform resources for the SA settop. - */ - -#include <linux/init.h> -#include <asm/mach-powertv/asic.h> - -#define ZEUS_ADDR(x) (ZEUS_IO_BASE + (x)) - -const struct register_map zeus_register_map __initconst = { - .eic_slow0_strt_add = {.phys = ZEUS_ADDR(0x000000)}, - .eic_cfg_bits = {.phys = ZEUS_ADDR(0x000038)}, - .eic_ready_status = {.phys = ZEUS_ADDR(0x00004c)}, - - .chipver3 = {.phys = ZEUS_ADDR(0x280800)}, - .chipver2 = {.phys = ZEUS_ADDR(0x280804)}, - .chipver1 = {.phys = ZEUS_ADDR(0x280808)}, - .chipver0 = {.phys = ZEUS_ADDR(0x28080c)}, - - /* The registers of IRBlaster */ - .uart1_intstat = {.phys = ZEUS_ADDR(0x281800)}, - .uart1_inten = {.phys = ZEUS_ADDR(0x281804)}, - .uart1_config1 = {.phys = ZEUS_ADDR(0x281808)}, - .uart1_config2 = {.phys = ZEUS_ADDR(0x28180C)}, - .uart1_divisorhi = {.phys = ZEUS_ADDR(0x281810)}, - .uart1_divisorlo = {.phys = ZEUS_ADDR(0x281814)}, - .uart1_data = {.phys = ZEUS_ADDR(0x281818)}, - .uart1_status = {.phys = ZEUS_ADDR(0x28181C)}, - - .int_stat_3 = {.phys = ZEUS_ADDR(0x282800)}, - .int_stat_2 = {.phys = ZEUS_ADDR(0x282804)}, - .int_stat_1 = {.phys = ZEUS_ADDR(0x282808)}, - .int_stat_0 = {.phys = ZEUS_ADDR(0x28280c)}, - .int_config = {.phys = ZEUS_ADDR(0x282810)}, - .int_int_scan = {.phys = ZEUS_ADDR(0x282818)}, - .ien_int_3 = {.phys = ZEUS_ADDR(0x282830)}, - .ien_int_2 = {.phys = ZEUS_ADDR(0x282834)}, - .ien_int_1 = {.phys = ZEUS_ADDR(0x282838)}, - .ien_int_0 = {.phys = ZEUS_ADDR(0x28283c)}, - .int_level_3_3 = {.phys = ZEUS_ADDR(0x282880)}, - .int_level_3_2 = {.phys = ZEUS_ADDR(0x282884)}, - .int_level_3_1 = {.phys = ZEUS_ADDR(0x282888)}, - .int_level_3_0 = {.phys = ZEUS_ADDR(0x28288c)}, - .int_level_2_3 = {.phys = ZEUS_ADDR(0x282890)}, - .int_level_2_2 = {.phys = ZEUS_ADDR(0x282894)}, - .int_level_2_1 = {.phys = ZEUS_ADDR(0x282898)}, - .int_level_2_0 = {.phys = ZEUS_ADDR(0x28289c)}, - .int_level_1_3 = {.phys = ZEUS_ADDR(0x2828a0)}, - .int_level_1_2 = {.phys = ZEUS_ADDR(0x2828a4)}, - .int_level_1_1 = {.phys = ZEUS_ADDR(0x2828a8)}, - .int_level_1_0 = {.phys = ZEUS_ADDR(0x2828ac)}, - .int_level_0_3 = {.phys = ZEUS_ADDR(0x2828b0)}, - .int_level_0_2 = {.phys = ZEUS_ADDR(0x2828b4)}, - .int_level_0_1 = {.phys = ZEUS_ADDR(0x2828b8)}, - .int_level_0_0 = {.phys = ZEUS_ADDR(0x2828bc)}, - .int_docsis_en = {.phys = ZEUS_ADDR(0x2828F4)}, - - .mips_pll_setup = {.phys = ZEUS_ADDR(0x1a0000)}, - .fs432x4b4_usb_ctl = {.phys = ZEUS_ADDR(0x1a0018)}, - .test_bus = {.phys = ZEUS_ADDR(0x1a0238)}, - .crt_spare = {.phys = ZEUS_ADDR(0x1a0090)}, - .usb2_ohci_int_mask = {.phys = ZEUS_ADDR(0x1e000c)}, - .usb2_strap = {.phys = ZEUS_ADDR(0x1e0014)}, - .ehci_hcapbase = {.phys = ZEUS_ADDR(0x1FFE00)}, - .ohci_hc_revision = {.phys = ZEUS_ADDR(0x1FFC00)}, - .bcm1_bs_lmi_steer = {.phys = ZEUS_ADDR(0x2C0008)}, - .usb2_control = {.phys = ZEUS_ADDR(0x2c01a0)}, - .usb2_stbus_obc = {.phys = ZEUS_ADDR(0x1FFF00)}, - .usb2_stbus_mess_size = {.phys = ZEUS_ADDR(0x1FFF04)}, - .usb2_stbus_chunk_size = {.phys = ZEUS_ADDR(0x1FFF08)}, - - .pcie_regs = {.phys = ZEUS_ADDR(0x200000)}, - .tim_ch = {.phys = ZEUS_ADDR(0x282C10)}, - .tim_cl = {.phys = ZEUS_ADDR(0x282C14)}, - .gpio_dout = {.phys = ZEUS_ADDR(0x282c20)}, - .gpio_din = {.phys = ZEUS_ADDR(0x282c24)}, - .gpio_dir = {.phys = ZEUS_ADDR(0x282c2C)}, - .watchdog = {.phys = ZEUS_ADDR(0x282c30)}, - .front_panel = {.phys = ZEUS_ADDR(0x283800)}, -}; diff --git a/arch/mips/powertv/asic/asic_devices.c b/arch/mips/powertv/asic/asic_devices.c deleted file mode 100644 index 8380605d597..00000000000 --- a/arch/mips/powertv/asic/asic_devices.c +++ /dev/null @@ -1,549 +0,0 @@ -/* - * - * Description: Defines the platform resources for Gaia-based settops. - * - * Copyright (C) 2005-2009 Scientific-Atlanta, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - * - * NOTE: The bootloader allocates persistent memory at an address which is - * 16 MiB below the end of the highest address in KSEG0. All fixed - * address memory reservations must avoid this region. - */ - -#include <linux/device.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/resource.h> -#include <linux/serial_reg.h> -#include <linux/io.h> -#include <linux/bootmem.h> -#include <linux/mm.h> -#include <linux/platform_device.h> -#include <linux/module.h> -#include <asm/page.h> -#include <linux/swap.h> -#include <linux/highmem.h> -#include <linux/dma-mapping.h> - -#include <asm/mach-powertv/asic.h> -#include <asm/mach-powertv/asic_regs.h> -#include <asm/mach-powertv/interrupts.h> - -#ifdef CONFIG_BOOTLOADER_DRIVER -#include <asm/mach-powertv/kbldr.h> -#endif -#include <asm/bootinfo.h> - -#define BOOTLDRFAMILY(byte1, byte0) (((byte1) << 8) | (byte0)) - -/* - * Forward Prototypes - */ -static void pmem_setup_resource(void); - -/* - * Global Variables - */ -enum asic_type asic; - -unsigned int platform_features; -unsigned int platform_family; -struct register_map _asic_register_map; -EXPORT_SYMBOL(_asic_register_map); /* Exported for testing */ -unsigned long asic_phy_base; -unsigned long asic_base; -EXPORT_SYMBOL(asic_base); /* Exported for testing */ -struct resource *gp_resources; - -/* - * Don't recommend to use it directly, it is usually used by kernel internally. - * Portable code should be using interfaces such as ioremp, dma_map_single, etc. - */ -unsigned long phys_to_dma_offset; -EXPORT_SYMBOL(phys_to_dma_offset); - -/* - * - * IO Resource Definition - * - */ - -struct resource asic_resource = { - .name = "ASIC Resource", - .start = 0, - .end = ASIC_IO_SIZE, - .flags = IORESOURCE_MEM, -}; - -/* - * Allow override of bootloader-specified model - * Returns zero on success, a negative errno value on failure. This parameter - * allows overriding of the bootloader-specified model. - */ -static char __initdata cmdline[COMMAND_LINE_SIZE]; - -#define FORCEFAMILY_PARAM "forcefamily" - -/* - * check_forcefamily - check for, and parse, forcefamily command line parameter - * @forced_family: Pointer to two-character array in which to store the - * value of the forcedfamily parameter, if any. - */ -static __init int check_forcefamily(unsigned char forced_family[2]) -{ - const char *p; - - forced_family[0] = '\0'; - forced_family[1] = '\0'; - - /* Check the command line for a forcefamily directive */ - strncpy(cmdline, arcs_cmdline, COMMAND_LINE_SIZE - 1); - p = strstr(cmdline, FORCEFAMILY_PARAM); - if (p && (p != cmdline) && (*(p - 1) != ' ')) - p = strstr(p, " " FORCEFAMILY_PARAM "="); - - if (p) { - p += strlen(FORCEFAMILY_PARAM "="); - - if (*p == '\0' || *(p + 1) == '\0' || - (*(p + 2) != '\0' && *(p + 2) != ' ')) - pr_err(FORCEFAMILY_PARAM " must be exactly two " - "characters long, ignoring value\n"); - - else { - forced_family[0] = *p; - forced_family[1] = *(p + 1); - } - } - - return 0; -} - -/* - * platform_set_family - determine major platform family type. - * - * Returns family type; -1 if none - * Returns the family type; -1 if none - * - */ -static __init noinline void platform_set_family(void) -{ - unsigned char forced_family[2]; - unsigned short bootldr_family; - - if (check_forcefamily(forced_family) == 0) - bootldr_family = BOOTLDRFAMILY(forced_family[0], - forced_family[1]); - else - bootldr_family = (unsigned short) BOOTLDRFAMILY( - CONFIG_BOOTLOADER_FAMILY[0], - CONFIG_BOOTLOADER_FAMILY[1]); - - pr_info("Bootloader Family = 0x%04X\n", bootldr_family); - - switch (bootldr_family) { - case BOOTLDRFAMILY('R', '1'): - platform_family = FAMILY_1500; - break; - case BOOTLDRFAMILY('4', '4'): - platform_family = FAMILY_4500; - break; - case BOOTLDRFAMILY('4', '6'): - platform_family = FAMILY_4600; - break; - case BOOTLDRFAMILY('A', '1'): - platform_family = FAMILY_4600VZA; - break; - case BOOTLDRFAMILY('8', '5'): - platform_family = FAMILY_8500; - break; - case BOOTLDRFAMILY('R', '2'): - platform_family = FAMILY_8500RNG; - break; - case BOOTLDRFAMILY('8', '6'): - platform_family = FAMILY_8600; - break; - case BOOTLDRFAMILY('B', '1'): - platform_family = FAMILY_8600VZB; - break; - case BOOTLDRFAMILY('E', '1'): - platform_family = FAMILY_1500VZE; - break; - case BOOTLDRFAMILY('F', '1'): - platform_family = FAMILY_1500VZF; - break; - case BOOTLDRFAMILY('8', '7'): - platform_family = FAMILY_8700; - break; - default: - platform_family = -1; - } -} - -unsigned int platform_get_family(void) -{ - return platform_family; -} -EXPORT_SYMBOL(platform_get_family); - -/* - * platform_get_asic - determine the ASIC type. - * - * Returns the ASIC type, or ASIC_UNKNOWN if unknown - * - */ -enum asic_type platform_get_asic(void) -{ - return asic; -} -EXPORT_SYMBOL(platform_get_asic); - -/* - * set_register_map - set ASIC register configuration - * @phys_base: Physical address of the base of the ASIC registers - * @map: Description of key ASIC registers - */ -static void __init set_register_map(unsigned long phys_base, - const struct register_map *map) -{ - asic_phy_base = phys_base; - _asic_register_map = *map; - register_map_virtualize(&_asic_register_map); - asic_base = (unsigned long)ioremap_nocache(phys_base, ASIC_IO_SIZE); -} - -/** - * configure_platform - configuration based on platform type. - */ -void __init configure_platform(void) -{ - platform_set_family(); - - switch (platform_family) { - case FAMILY_1500: - case FAMILY_1500VZE: - case FAMILY_1500VZF: - platform_features = FFS_CAPABLE; - asic = ASIC_CALLIOPE; - set_register_map(CALLIOPE_IO_BASE, &calliope_register_map); - - if (platform_family == FAMILY_1500VZE) { - gp_resources = non_dvr_vze_calliope_resources; - pr_info("Platform: 1500/Vz Class E - " - "CALLIOPE, NON_DVR_CAPABLE\n"); - } else if (platform_family == FAMILY_1500VZF) { - gp_resources = non_dvr_vzf_calliope_resources; - pr_info("Platform: 1500/Vz Class F - " - "CALLIOPE, NON_DVR_CAPABLE\n"); - } else { - gp_resources = non_dvr_calliope_resources; - pr_info("Platform: 1500/RNG100 - CALLIOPE, " - "NON_DVR_CAPABLE\n"); - } - break; - - case FAMILY_4500: - platform_features = FFS_CAPABLE | PCIE_CAPABLE | - DISPLAY_CAPABLE; - asic = ASIC_ZEUS; - set_register_map(ZEUS_IO_BASE, &zeus_register_map); - gp_resources = non_dvr_zeus_resources; - - pr_info("Platform: 4500 - ZEUS, NON_DVR_CAPABLE\n"); - break; - - case FAMILY_4600: - { - unsigned int chipversion = 0; - - /* The settop has PCIE but it isn't used, so don't advertise - * it*/ - platform_features = FFS_CAPABLE | DISPLAY_CAPABLE; - - /* Cronus and Cronus Lite have the same register map */ - set_register_map(CRONUS_IO_BASE, &cronus_register_map); - - /* ASIC version will determine if this is a real CronusLite or - * Castrati(Cronus) */ - chipversion = asic_read(chipver3) << 24; - chipversion |= asic_read(chipver2) << 16; - chipversion |= asic_read(chipver1) << 8; - chipversion |= asic_read(chipver0); - - if ((chipversion == CRONUS_10) || (chipversion == CRONUS_11)) - asic = ASIC_CRONUS; - else - asic = ASIC_CRONUSLITE; - - gp_resources = non_dvr_cronuslite_resources; - pr_info("Platform: 4600 - %s, NON_DVR_CAPABLE, " - "chipversion=0x%08X\n", - (asic == ASIC_CRONUS) ? "CRONUS" : "CRONUS LITE", - chipversion); - break; - } - case FAMILY_4600VZA: - platform_features = FFS_CAPABLE | DISPLAY_CAPABLE; - asic = ASIC_CRONUS; - set_register_map(CRONUS_IO_BASE, &cronus_register_map); - gp_resources = non_dvr_cronus_resources; - - pr_info("Platform: Vz Class A - CRONUS, NON_DVR_CAPABLE\n"); - break; - - case FAMILY_8500: - case FAMILY_8500RNG: - platform_features = DVR_CAPABLE | PCIE_CAPABLE | - DISPLAY_CAPABLE; - asic = ASIC_ZEUS; - set_register_map(ZEUS_IO_BASE, &zeus_register_map); - gp_resources = dvr_zeus_resources; - - pr_info("Platform: 8500/RNG200 - ZEUS, DVR_CAPABLE\n"); - break; - - case FAMILY_8600: - case FAMILY_8600VZB: - platform_features = DVR_CAPABLE | PCIE_CAPABLE | - DISPLAY_CAPABLE; - asic = ASIC_CRONUS; - set_register_map(CRONUS_IO_BASE, &cronus_register_map); - gp_resources = dvr_cronus_resources; - - pr_info("Platform: 8600/Vz Class B - CRONUS, " - "DVR_CAPABLE\n"); - break; - - case FAMILY_8700: - platform_features = FFS_CAPABLE | PCIE_CAPABLE; - asic = ASIC_GAIA; - set_register_map(GAIA_IO_BASE, &gaia_register_map); - gp_resources = dvr_gaia_resources; - - pr_info("Platform: 8700 - GAIA, DVR_CAPABLE\n"); - break; - - default: - pr_crit("Platform: UNKNOWN PLATFORM\n"); - break; - } - - switch (asic) { - case ASIC_ZEUS: - phys_to_dma_offset = 0x30000000; - break; - case ASIC_CALLIOPE: - phys_to_dma_offset = 0x10000000; - break; - case ASIC_CRONUSLITE: - /* Fall through */ - case ASIC_CRONUS: - /* - * TODO: We suppose 0x10000000 aliases into 0x20000000- - * 0x2XXXXXXX. If 0x10000000 aliases into 0x60000000- - * 0x6XXXXXXX, the offset should be 0x50000000, not 0x10000000. - */ - phys_to_dma_offset = 0x10000000; - break; - default: - phys_to_dma_offset = 0x00000000; - break; - } -} - -/* - * RESOURCE ALLOCATION - * - */ -/* - * Allocates/reserves the Platform memory resources early in the boot process. - * This ignores any resources that are designated IORESOURCE_IO - */ -void __init platform_alloc_bootmem(void) -{ - int i; - int total = 0; - - /* Get persistent memory data from command line before allocating - * resources. This need to happen before normal command line parsing - * has been done */ - pmem_setup_resource(); - - /* Loop through looking for resources that want a particular address */ - for (i = 0; gp_resources[i].flags != 0; i++) { - int size = resource_size(&gp_resources[i]); - if ((gp_resources[i].start != 0) && - ((gp_resources[i].flags & IORESOURCE_MEM) != 0)) { - reserve_bootmem(dma_to_phys(gp_resources[i].start), - size, 0); - total += resource_size(&gp_resources[i]); - pr_info("reserve resource %s at %08x (%u bytes)\n", - gp_resources[i].name, gp_resources[i].start, - resource_size(&gp_resources[i])); - } - } - - /* Loop through assigning addresses for those that are left */ - for (i = 0; gp_resources[i].flags != 0; i++) { - int size = resource_size(&gp_resources[i]); - if ((gp_resources[i].start == 0) && - ((gp_resources[i].flags & IORESOURCE_MEM) != 0)) { - void *mem = alloc_bootmem_pages(size); - - if (mem == NULL) - pr_err("Unable to allocate bootmem pages " - "for %s\n", gp_resources[i].name); - - else { - gp_resources[i].start = - phys_to_dma(virt_to_phys(mem)); - gp_resources[i].end = - gp_resources[i].start + size - 1; - total += size; - pr_info("allocate resource %s at %08x " - "(%u bytes)\n", - gp_resources[i].name, - gp_resources[i].start, size); - } - } - } - - pr_info("Total Platform driver memory allocation: 0x%08x\n", total); - - /* indicate resources that are platform I/O related */ - for (i = 0; gp_resources[i].flags != 0; i++) { - if ((gp_resources[i].start != 0) && - ((gp_resources[i].flags & IORESOURCE_IO) != 0)) { - pr_info("reserved platform resource %s at %08x\n", - gp_resources[i].name, gp_resources[i].start); - } - } -} - -/* - * - * PERSISTENT MEMORY (PMEM) CONFIGURATION - * - */ -static unsigned long pmemaddr __initdata; - -static int __init early_param_pmemaddr(char *p) -{ - pmemaddr = (unsigned long)simple_strtoul(p, NULL, 0); - return 0; -} -early_param("pmemaddr", early_param_pmemaddr); - -static long pmemlen __initdata; - -static int __init early_param_pmemlen(char *p) -{ -/* TODO: we can use this code when and if the bootloader ever changes this */ -#if 0 - pmemlen = (unsigned long)simple_strtoul(p, NULL, 0); -#else - pmemlen = 0x20000; -#endif - return 0; -} -early_param("pmemlen", early_param_pmemlen); - -/* - * Set up persistent memory. If we were given values, we patch the array of - * resources. Otherwise, persistent memory may be allocated anywhere at all. - */ -static void __init pmem_setup_resource(void) -{ - struct resource *resource; - resource = asic_resource_get("DiagPersistentMemory"); - - if (resource && pmemaddr && pmemlen) { - /* The address provided by bootloader is in kseg0. Convert to - * a bus address. */ - resource->start = phys_to_dma(pmemaddr - 0x80000000); - resource->end = resource->start + pmemlen - 1; - - pr_info("persistent memory: start=0x%x end=0x%x\n", - resource->start, resource->end); - } -} - -/* - * - * RESOURCE ACCESS FUNCTIONS - * - */ - -/** - * asic_resource_get - retrieves parameters for a platform resource. - * @name: string to match resource - * - * Returns a pointer to a struct resource corresponding to the given name. - * - * CANNOT BE NAMED platform_resource_get, which would be the obvious choice, - * as this function name is already declared - */ -struct resource *asic_resource_get(const char *name) -{ - int i; - - for (i = 0; gp_resources[i].flags != 0; i++) { - if (strcmp(gp_resources[i].name, name) == 0) - return &gp_resources[i]; - } - - return NULL; -} -EXPORT_SYMBOL(asic_resource_get); - -/** - * platform_release_memory - release pre-allocated memory - * @ptr: pointer to memory to release - * @size: size of resource - * - * This must only be called for memory allocated or reserved via the boot - * memory allocator. - */ -void platform_release_memory(void *ptr, int size) -{ - free_reserved_area(ptr, ptr + size, -1, NULL); -} -EXPORT_SYMBOL(platform_release_memory); - -/* - * - * FEATURE AVAILABILITY FUNCTIONS - * - */ -int platform_supports_dvr(void) -{ - return (platform_features & DVR_CAPABLE) != 0; -} - -int platform_supports_ffs(void) -{ - return (platform_features & FFS_CAPABLE) != 0; -} - -int platform_supports_pcie(void) -{ - return (platform_features & PCIE_CAPABLE) != 0; -} - -int platform_supports_display(void) -{ - return (platform_features & DISPLAY_CAPABLE) != 0; -} diff --git a/arch/mips/powertv/asic/asic_int.c b/arch/mips/powertv/asic/asic_int.c deleted file mode 100644 index f44cd9295ca..00000000000 --- a/arch/mips/powertv/asic/asic_int.c +++ /dev/null @@ -1,125 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 2000, 2001, 2004 MIPS Technologies, Inc. - * Copyright (C) 2001 Ralf Baechle - * Portions copyright (C) 2009 Cisco Systems, Inc. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * Routines for generic manipulation of the interrupts found on the PowerTV - * platform. - * - * The interrupt controller is located in the South Bridge a PIIX4 device - * with two internal 82C95 interrupt controllers. - */ -#include <linux/init.h> -#include <linux/irq.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/kernel_stat.h> -#include <linux/kernel.h> -#include <linux/random.h> - -#include <asm/irq_cpu.h> -#include <linux/io.h> -#include <asm/irq_regs.h> -#include <asm/setup.h> -#include <asm/mips-boards/generic.h> - -#include <asm/mach-powertv/asic_regs.h> - -static DEFINE_RAW_SPINLOCK(asic_irq_lock); - -static inline int get_int(void) -{ - unsigned long flags; - int irq; - - raw_spin_lock_irqsave(&asic_irq_lock, flags); - - irq = (asic_read(int_int_scan) >> 4) - 1; - - if (irq == 0 || irq >= NR_IRQS) - irq = -1; - - raw_spin_unlock_irqrestore(&asic_irq_lock, flags); - - return irq; -} - -static void asic_irqdispatch(void) -{ - int irq; - - irq = get_int(); - if (irq < 0) - return; /* interrupt has already been cleared */ - - do_IRQ(irq); -} - -static inline int clz(unsigned long x) -{ - __asm__( - " .set push \n" - " .set mips32 \n" - " clz %0, %1 \n" - " .set pop \n" - : "=r" (x) - : "r" (x)); - - return x; -} - -/* - * Version of ffs that only looks at bits 12..15. - */ -static inline unsigned int irq_ffs(unsigned int pending) -{ - return fls(pending) - 1 + CAUSEB_IP; -} - -/* - * TODO: check how it works under EIC mode. - */ -asmlinkage void plat_irq_dispatch(void) -{ - unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM; - int irq; - - irq = irq_ffs(pending); - - if (irq == CAUSEF_IP3) - asic_irqdispatch(); - else if (irq >= 0) - do_IRQ(irq); - else - spurious_interrupt(); -} - -void __init arch_init_irq(void) -{ - int i; - - asic_irq_init(); - - /* - * Initialize interrupt exception vectors. - */ - if (cpu_has_veic || cpu_has_vint) { - int nvec = cpu_has_veic ? 64 : 8; - for (i = 0; i < nvec; i++) - set_vi_handler(i, asic_irqdispatch); - } -} diff --git a/arch/mips/powertv/asic/irq_asic.c b/arch/mips/powertv/asic/irq_asic.c deleted file mode 100644 index 9344902dc58..00000000000 --- a/arch/mips/powertv/asic/irq_asic.c +++ /dev/null @@ -1,115 +0,0 @@ -/* - * Portions copyright (C) 2005-2009 Scientific Atlanta - * Portions copyright (C) 2009 Cisco Systems, Inc. - * - * Modified from arch/mips/kernel/irq-rm7000.c: - * Copyright (C) 2003 Ralf Baechle - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/kernel.h> -#include <linux/irq.h> - -#include <asm/irq_cpu.h> -#include <asm/mipsregs.h> - -#include <asm/mach-powertv/asic_regs.h> - -static inline void unmask_asic_irq(struct irq_data *d) -{ - unsigned long enable_bit; - unsigned int irq = d->irq; - - enable_bit = (1 << (irq & 0x1f)); - - switch (irq >> 5) { - case 0: - asic_write(asic_read(ien_int_0) | enable_bit, ien_int_0); - break; - case 1: - asic_write(asic_read(ien_int_1) | enable_bit, ien_int_1); - break; - case 2: - asic_write(asic_read(ien_int_2) | enable_bit, ien_int_2); - break; - case 3: - asic_write(asic_read(ien_int_3) | enable_bit, ien_int_3); - break; - default: - BUG(); - } -} - -static inline void mask_asic_irq(struct irq_data *d) -{ - unsigned long disable_mask; - unsigned int irq = d->irq; - - disable_mask = ~(1 << (irq & 0x1f)); - - switch (irq >> 5) { - case 0: - asic_write(asic_read(ien_int_0) & disable_mask, ien_int_0); - break; - case 1: - asic_write(asic_read(ien_int_1) & disable_mask, ien_int_1); - break; - case 2: - asic_write(asic_read(ien_int_2) & disable_mask, ien_int_2); - break; - case 3: - asic_write(asic_read(ien_int_3) & disable_mask, ien_int_3); - break; - default: - BUG(); - } -} - -static struct irq_chip asic_irq_chip = { - .name = "ASIC Level", - .irq_mask = mask_asic_irq, - .irq_unmask = unmask_asic_irq, -}; - -void __init asic_irq_init(void) -{ - int i; - - /* set priority to 0 */ - write_c0_status(read_c0_status() & ~(0x0000fc00)); - - asic_write(0, ien_int_0); - asic_write(0, ien_int_1); - asic_write(0, ien_int_2); - asic_write(0, ien_int_3); - - asic_write(0x0fffffff, int_level_3_3); - asic_write(0xffffffff, int_level_3_2); - asic_write(0xffffffff, int_level_3_1); - asic_write(0xffffffff, int_level_3_0); - asic_write(0xffffffff, int_level_2_3); - asic_write(0xffffffff, int_level_2_2); - asic_write(0xffffffff, int_level_2_1); - asic_write(0xffffffff, int_level_2_0); - asic_write(0xffffffff, int_level_1_3); - asic_write(0xffffffff, int_level_1_2); - asic_write(0xffffffff, int_level_1_1); - asic_write(0xffffffff, int_level_1_0); - asic_write(0xffffffff, int_level_0_3); - asic_write(0xffffffff, int_level_0_2); - asic_write(0xffffffff, int_level_0_1); - asic_write(0xffffffff, int_level_0_0); - - asic_write(0xf, int_int_scan); - - /* - * Initialize interrupt handlers. - */ - for (i = 0; i < NR_IRQS; i++) - irq_set_chip_and_handler(i, &asic_irq_chip, handle_level_irq); -} diff --git a/arch/mips/powertv/asic/prealloc-calliope.c b/arch/mips/powertv/asic/prealloc-calliope.c deleted file mode 100644 index 98dc5165057..00000000000 --- a/arch/mips/powertv/asic/prealloc-calliope.c +++ /dev/null @@ -1,385 +0,0 @@ -/* - * Memory pre-allocations for Calliope boxes. - * - * Copyright (C) 2005-2009 Scientific-Atlanta, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - * - * Author: Ken Eppinett - * David Schleef <ds@schleef.org> - */ - -#include <linux/init.h> -#include <linux/ioport.h> -#include <asm/mach-powertv/asic.h> -#include "prealloc.h" - -/* - * NON_DVR_CAPABLE CALLIOPE RESOURCES - */ -struct resource non_dvr_calliope_resources[] __initdata = -{ - /* - * VIDEO / LX1 - */ - /* Delta-Mu 1 image (2MiB) */ - PREALLOC_NORMAL("ST231aImage", 0x24000000, 0x24200000-1, - IORESOURCE_MEM) - /* Delta-Mu 1 monitor (8KiB) */ - PREALLOC_NORMAL("ST231aMonitor", 0x24200000, 0x24202000-1, - IORESOURCE_MEM) - /* Delta-Mu 1 RAM (~36.9MiB (32MiB - (2MiB + 8KiB))) */ - PREALLOC_NORMAL("MediaMemory1", 0x24202000, 0x26700000-1, - IORESOURCE_MEM) - - /* - * Sysaudio Driver - */ - /* DSP code and data images (1MiB) */ - PREALLOC_NORMAL("DSP_Image_Buff", 0x00000000, 0x00100000-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - /* ADSC CPU PCM buffer (40KiB) */ - PREALLOC_NORMAL("ADSC_CPU_PCM_Buff", 0x00000000, 0x0000A000-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - /* ADSC AUX buffer (128KiB) */ - PREALLOC_NORMAL("ADSC_AUX_Buff", 0x00000000, 0x00020000-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - /* ADSC Main buffer (128KiB) */ - PREALLOC_NORMAL("ADSC_Main_Buff", 0x00000000, 0x00020000-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - - /* - * STAVEM driver/STAPI - */ - /* 6MiB */ - PREALLOC_NORMAL("AVMEMPartition0", 0x00000000, 0x00600000-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - - /* - * DOCSIS Subsystem - */ - /* 7MiB */ - PREALLOC_DOCSIS("Docsis", 0x27500000, 0x27c00000-1, IORESOURCE_MEM) - - /* - * GHW HAL Driver - */ - /* PowerTV Graphics Heap (14MiB) */ - PREALLOC_NORMAL("GraphicsHeap", 0x26700000, 0x26700000+(14*1048576)-1, - IORESOURCE_MEM) - - /* - * multi com buffer area - */ - /* 128KiB */ - PREALLOC_NORMAL("MulticomSHM", 0x23700000, 0x23720000-1, - IORESOURCE_MEM) - - /* - * DMA Ring buffer (don't need recording buffers) - */ - /* 680KiB */ - PREALLOC_NORMAL("BMM_Buffer", 0x00000000, 0x000AA000-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - - /* - * Display bins buffer for unit0 - */ - /* 4KiB */ - PREALLOC_NORMAL("DisplayBins0", 0x00000000, 0x00001000-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - - /* - * AVFS: player HAL memory - */ - /* 945K * 3 for playback */ - PREALLOC_NORMAL("AvfsDmaMem", 0x00000000, 0x002c4c00-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - - /* - * PMEM - */ - /* Persistent memory for diagnostics (64KiB) */ - PREALLOC_PMEM("DiagPersistentMemory", 0x00000000, 0x10000-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - - /* - * Smartcard - */ - /* Read and write buffers for Internal/External cards (10KiB) */ - PREALLOC_NORMAL("SmartCardInfo", 0x00000000, 0x2800-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - - /* - * NAND Flash - */ - /* 10KiB */ - PREALLOC_NORMAL("NandFlash", NAND_FLASH_BASE, NAND_FLASH_BASE+0x400-1, - IORESOURCE_MEM) - - /* - * Synopsys GMAC Memory Region - */ - /* 64KiB */ - PREALLOC_NORMAL("GMAC", 0x00000000, 0x00010000-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - - /* - * TFTPBuffer - * - * This buffer is used in some minimal configurations (e.g. two-way - * loader) for storing software images - */ - PREALLOC_TFTP("TFTPBuffer", 0x00000000, MEBIBYTE(80)-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - - /* - * Add other resources here - */ - - /* - * End of Resource marker - */ - { - .flags = 0, - }, -}; - - -struct resource non_dvr_vze_calliope_resources[] __initdata = -{ - /* - * VIDEO / LX1 - */ - /* Delta-Mu 1 image (2MiB) */ - PREALLOC_NORMAL("ST231aImage", 0x22000000, 0x22200000-1, - IORESOURCE_MEM) - /* Delta-Mu 1 monitor (8KiB) */ - PREALLOC_NORMAL("ST231aMonitor", 0x22200000, 0x22202000-1, - IORESOURCE_MEM) - /* Delta-Mu 1 RAM (10.12MiB) */ - PREALLOC_NORMAL("MediaMemory1", 0x22202000, 0x22C20B85-1, - IORESOURCE_MEM) - - /* - * Sysaudio Driver - */ - /* DSP code and data images (1MiB) */ - PREALLOC_NORMAL("DSP_Image_Buff", 0x00000000, 0x00100000-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - /* ADSC CPU PCM buffer (40KiB) */ - PREALLOC_NORMAL("ADSC_CPU_PCM_Buff", 0x00000000, 0x0000A000-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - /* ADSC AUX buffer (16KiB) */ - PREALLOC_NORMAL("ADSC_AUX_Buff", 0x00000000, 0x00004000-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - /* ADSC Main buffer (16KiB) */ - PREALLOC_NORMAL("ADSC_Main_Buff", 0x00000000, 0x00004000-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - - /* - * STAVEM driver/STAPI - */ - /* 3.125MiB */ - PREALLOC_NORMAL("AVMEMPartition0", 0x20396000, 0x206B6000-1, - IORESOURCE_MEM) - - /* - * GHW HAL Driver - */ - /* PowerTV Graphics Heap (2.59MiB) */ - PREALLOC_NORMAL("GraphicsHeap", 0x20100000, 0x20396000-1, - IORESOURCE_MEM) - - /* - * multi com buffer area - */ - /* 128KiB */ - PREALLOC_NORMAL("MulticomSHM", 0x206B6000, 0x206D6000-1, - IORESOURCE_MEM) - - /* - * DMA Ring buffer (don't need recording buffers) - */ - /* 680KiB */ - PREALLOC_NORMAL("BMM_Buffer", 0x00000000, 0x000AA000-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - - /* - * Display bins buffer for unit0 - */ - /* 4KiB */ - PREALLOC_NORMAL("DisplayBins0", 0x00000000, 0x00001000-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - - /* - * PMEM - */ - /* Persistent memory for diagnostics (64KiB) */ - PREALLOC_PMEM("DiagPersistentMemory", 0x00000000, 0x10000-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - - /* - * Smartcard - */ - /* Read and write buffers for Internal/External cards (10KiB) */ - PREALLOC_NORMAL("SmartCardInfo", 0x00000000, 0x2800-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - - /* - * NAND Flash - */ - /* 10KiB */ - PREALLOC_NORMAL("NandFlash", NAND_FLASH_BASE, NAND_FLASH_BASE+0x400-1, - IORESOURCE_MEM) - - /* - * Synopsys GMAC Memory Region - */ - /* 64KiB */ - PREALLOC_NORMAL("GMAC", 0x00000000, 0x00010000-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - - /* - * Add other resources here - */ - - /* - * End of Resource marker - */ - { - .flags = 0, - }, -}; - -struct resource non_dvr_vzf_calliope_resources[] __initdata = -{ - /* - * VIDEO / LX1 - */ - /* Delta-Mu 1 image (2MiB) */ - PREALLOC_NORMAL("ST231aImage", 0x24000000, 0x24200000-1, - IORESOURCE_MEM) - /* Delta-Mu 1 monitor (8KiB) */ - PREALLOC_NORMAL("ST231aMonitor", 0x24200000, 0x24202000-1, - IORESOURCE_MEM) - /* Delta-Mu 1 RAM (~19.4 (21.5MiB - (2MiB + 8KiB))) */ - PREALLOC_NORMAL("MediaMemory1", 0x24202000, 0x25580000-1, - IORESOURCE_MEM) - - /* - * Sysaudio Driver - */ - /* DSP code and data images (1MiB) */ - PREALLOC_NORMAL("DSP_Image_Buff", 0x00000000, 0x00100000-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - /* ADSC CPU PCM buffer (40KiB) */ - PREALLOC_NORMAL("ADSC_CPU_PCM_Buff", 0x00000000, 0x0000A000-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - /* ADSC AUX buffer (128KiB) */ - PREALLOC_NORMAL("ADSC_AUX_Buff", 0x00000000, 0x00020000-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - /* ADSC Main buffer (128KiB) */ - PREALLOC_NORMAL("ADSC_Main_Buff", 0x00000000, 0x00020000-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - - /* - * STAVEM driver/STAPI - */ - /* 4.5MiB */ - PREALLOC_NORMAL("AVMEMPartition0", 0x00000000, 0x00480000-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - - /* - * GHW HAL Driver - */ - /* PowerTV Graphics Heap (14MiB) */ - PREALLOC_NORMAL("GraphicsHeap", 0x25600000, 0x25600000+(14*1048576)-1, - IORESOURCE_MEM) - - /* - * multi com buffer area - */ - /* 128KiB */ - PREALLOC_NORMAL("MulticomSHM", 0x23700000, 0x23720000-1, - IORESOURCE_MEM) - - /* - * DMA Ring buffer (don't need recording buffers) - */ - /* 680KiB */ - PREALLOC_NORMAL("BMM_Buffer", 0x00000000, 0x000AA000-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - - /* - * Display bins buffer for unit0 - */ - /* 4KiB */ - PREALLOC_NORMAL("DisplayBins0", 0x00000000, 0x00001000-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - - /* - * Display bins buffer for unit1 - */ - /* 4KiB */ - PREALLOC_NORMAL("DisplayBins1", 0x00000000, 0x00001000-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - - /* - * AVFS: player HAL memory - */ - /* 945K * 3 for playback */ - PREALLOC_NORMAL("AvfsDmaMem", 0x00000000, 0x002c4c00-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - - /* - * PMEM - */ - /* Persistent memory for diagnostics (64KiB) */ - PREALLOC_PMEM("DiagPersistentMemory", 0x00000000, 0x10000-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - - /* - * Smartcard - */ - /* Read and write buffers for Internal/External cards (10KiB) */ - PREALLOC_NORMAL("SmartCardInfo", 0x00000000, 0x2800-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - - /* - * NAND Flash - */ - /* 10KiB */ - PREALLOC_NORMAL("NandFlash", NAND_FLASH_BASE, NAND_FLASH_BASE+0x400-1, - IORESOURCE_MEM) - - /* - * Synopsys GMAC Memory Region - */ - /* 64KiB */ - PREALLOC_NORMAL("GMAC", 0x00000000, 0x00010000-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - - /* - * Add other resources here - */ - - /* - * End of Resource marker - */ - { - .flags = 0, - }, -}; diff --git a/arch/mips/powertv/asic/prealloc-cronus.c b/arch/mips/powertv/asic/prealloc-cronus.c deleted file mode 100644 index 7c6ce759693..00000000000 --- a/arch/mips/powertv/asic/prealloc-cronus.c +++ /dev/null @@ -1,340 +0,0 @@ -/* - * Memory pre-allocations for Cronus boxes. - * - * Copyright (C) 2005-2009 Scientific-Atlanta, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - * - * Author: Ken Eppinett - * David Schleef <ds@schleef.org> - */ - -#include <linux/init.h> -#include <linux/ioport.h> -#include <asm/mach-powertv/asic.h> -#include "prealloc.h" - -/* - * DVR_CAPABLE CRONUS RESOURCES - */ -struct resource dvr_cronus_resources[] __initdata = -{ - /* - * VIDEO1 / LX1 - */ - /* Delta-Mu 1 image (2MiB) */ - PREALLOC_NORMAL("ST231aImage", 0x24000000, 0x24200000-1, - IORESOURCE_MEM) - /* Delta-Mu 1 monitor (8KiB) */ - PREALLOC_NORMAL("ST231aMonitor", 0x24200000, 0x24202000-1, - IORESOURCE_MEM) - /* Delta-Mu 1 RAM (~29.9MiB (32MiB - (2MiB + 8KiB))) */ - PREALLOC_NORMAL("MediaMemory1", 0x24202000, 0x26000000-1, - IORESOURCE_MEM) - - /* - * VIDEO2 / LX2 - */ - /* Delta-Mu 2 image (2MiB) */ - PREALLOC_NORMAL("ST231bImage", 0x60000000, 0x60200000-1, - IORESOURCE_MEM) - /* Delta-Mu 2 monitor (8KiB) */ - PREALLOC_NORMAL("ST231bMonitor", 0x60200000, 0x60202000-1, - IORESOURCE_MEM) - /* Delta-Mu 2 RAM (~29.9MiB (32MiB - (2MiB + 8KiB))) */ - PREALLOC_NORMAL("MediaMemory2", 0x60202000, 0x62000000-1, - IORESOURCE_MEM) - - /* - * Sysaudio Driver - */ - /* DSP code and data images (1MiB) */ - PREALLOC_NORMAL("DSP_Image_Buff", 0x00000000, 0x00100000-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - /* ADSC CPU PCM buffer (40KiB) */ - PREALLOC_NORMAL("ADSC_CPU_PCM_Buff", 0x00000000, 0x0000A000-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - /* ADSC AUX buffer (128KiB) */ - PREALLOC_NORMAL("ADSC_AUX_Buff", 0x00000000, 0x00020000-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - /* ADSC Main buffer (128KiB) */ - PREALLOC_NORMAL("ADSC_Main_Buff", 0x00000000, 0x00020000-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - - /* - * STAVEM driver/STAPI - * - * This memory area is used for allocating buffers for Video decoding - * purposes. Allocation/De-allocation within this buffer is managed - * by the STAVMEM driver of the STAPI. They could be Decimated - * Picture Buffers, Intermediate Buffers, as deemed necessary for - * video decoding purposes, for any video decoders on Zeus. - */ - /* 12MiB */ - PREALLOC_NORMAL("AVMEMPartition0", 0x00000000, 0x00c00000-1, - IORESOURCE_MEM) - - /* - * DOCSIS Subsystem - */ - /* 7MiB */ - PREALLOC_DOCSIS("Docsis", 0x67500000, 0x67c00000-1, IORESOURCE_MEM) - - /* - * GHW HAL Driver - */ - /* PowerTV Graphics Heap (14MiB) */ - PREALLOC_NORMAL("GraphicsHeap", 0x62700000, 0x63500000-1, - IORESOURCE_MEM) - - /* - * multi com buffer area - */ - /* 128KiB */ - PREALLOC_NORMAL("MulticomSHM", 0x26000000, 0x26020000-1, - IORESOURCE_MEM) - - /* - * DMA Ring buffer - */ - PREALLOC_NORMAL("BMM_Buffer", 0x00000000, 0x002EA000-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - - /* - * Display bins buffer for unit0 - */ - /* 4KiB */ - PREALLOC_NORMAL("DisplayBins0", 0x00000000, 0x00001000-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - - /* - * Display bins buffer for unit1 - */ - /* 4KiB */ - PREALLOC_NORMAL("DisplayBins1", 0x00000000, 0x00001000-1, - IORESOURCE_MEM) - - /* - * ITFS - */ - /* 815,104 bytes each for 2 ITFS partitions. */ - PREALLOC_NORMAL("ITFS", 0x00000000, 0x0018E000-1, IORESOURCE_MEM) - - /* - * AVFS - */ - /* (945K * 8) = (128K * 3) 5 playbacks / 3 server */ - PREALLOC_NORMAL("AvfsDmaMem", 0x00000000, 0x007c2000-1, - IORESOURCE_MEM) - - /* 4KiB */ - PREALLOC_NORMAL("AvfsFileSys", 0x00000000, 0x00001000-1, - IORESOURCE_MEM) - - /* - * PMEM - */ - /* Persistent memory for diagnostics (64KiB) */ - PREALLOC_PMEM("DiagPersistentMemory", 0x00000000, 0x10000-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - - /* - * Smartcard - */ - /* Read and write buffers for Internal/External cards (10KiB) */ - PREALLOC_NORMAL("SmartCardInfo", 0x00000000, 0x2800-1, - IORESOURCE_MEM) - - /* - * KAVNET - */ - /* NP Reset Vector - must be of the form xxCxxxxx (4KiB) */ - PREALLOC_NORMAL("NP_Reset_Vector", 0x27c00000, 0x27c01000-1, - IORESOURCE_MEM) - /* NP Image - must be video bank 1 (320KiB) */ - PREALLOC_NORMAL("NP_Image", 0x27020000, 0x27070000-1, IORESOURCE_MEM) - /* NP IPC - must be video bank 2 (512KiB) */ - PREALLOC_NORMAL("NP_IPC", 0x63500000, 0x63580000-1, IORESOURCE_MEM) - - /* - * TFTPBuffer - * - * This buffer is used in some minimal configurations (e.g. two-way - * loader) for storing software images - */ - PREALLOC_TFTP("TFTPBuffer", 0x00000000, MEBIBYTE(80)-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - - /* - * Add other resources here - */ - - /* - * End of Resource marker - */ - { - .flags = 0, - }, -}; - -/* - * NON_DVR_CAPABLE CRONUS RESOURCES - */ -struct resource non_dvr_cronus_resources[] __initdata = -{ - /* - * VIDEO1 / LX1 - */ - /* Delta-Mu 1 image (2MiB) */ - PREALLOC_NORMAL("ST231aImage", 0x24000000, 0x24200000-1, - IORESOURCE_MEM) - /* Delta-Mu 1 monitor (8KiB) */ - PREALLOC_NORMAL("ST231aMonitor", 0x24200000, 0x24202000-1, - IORESOURCE_MEM) - /* Delta-Mu 1 RAM (~29.9MiB (32MiB - (2MiB + 8KiB))) */ - PREALLOC_NORMAL("MediaMemory1", 0x24202000, 0x26000000-1, - IORESOURCE_MEM) - - /* - * VIDEO2 / LX2 - */ - /* Delta-Mu 2 image (2MiB) */ - PREALLOC_NORMAL("ST231bImage", 0x60000000, 0x60200000-1, - IORESOURCE_MEM) - /* Delta-Mu 2 monitor (8KiB) */ - PREALLOC_NORMAL("ST231bMonitor", 0x60200000, 0x60202000-1, - IORESOURCE_MEM) - /* Delta-Mu 2 RAM (~29.9MiB (32MiB - (2MiB + 8KiB))) */ - PREALLOC_NORMAL("MediaMemory2", 0x60202000, 0x62000000-1, - IORESOURCE_MEM) - - /* - * Sysaudio Driver - */ - /* DSP code and data images (1MiB) */ - PREALLOC_NORMAL("DSP_Image_Buff", 0x00000000, 0x00100000-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - /* ADSC CPU PCM buffer (40KiB) */ - PREALLOC_NORMAL("ADSC_CPU_PCM_Buff", 0x00000000, 0x0000A000-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - /* ADSC AUX buffer (128KiB) */ - PREALLOC_NORMAL("ADSC_AUX_Buff", 0x00000000, 0x00020000-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - /* ADSC Main buffer (128KiB) */ - PREALLOC_NORMAL("ADSC_Main_Buff", 0x00000000, 0x00020000-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - - /* - * STAVEM driver/STAPI - * - * This memory area is used for allocating buffers for Video decoding - * purposes. Allocation/De-allocation within this buffer is managed - * by the STAVMEM driver of the STAPI. They could be Decimated - * Picture Buffers, Intermediate Buffers, as deemed necessary for - * video decoding purposes, for any video decoders on Zeus. - */ - /* 12MiB */ - PREALLOC_NORMAL("AVMEMPartition0", 0x00000000, 0x00c00000-1, - IORESOURCE_MEM) - - /* - * DOCSIS Subsystem - */ - /* 7MiB */ - PREALLOC_DOCSIS("Docsis", 0x67500000, 0x67c00000-1, IORESOURCE_MEM) - - /* - * GHW HAL Driver - */ - /* PowerTV Graphics Heap (14MiB) */ - PREALLOC_NORMAL("GraphicsHeap", 0x62700000, 0x63500000-1, - IORESOURCE_MEM) - - /* - * multi com buffer area - */ - /* 128KiB */ - PREALLOC_NORMAL("MulticomSHM", 0x26000000, 0x26020000-1, - IORESOURCE_MEM) - - /* - * DMA Ring buffer (don't need recording buffers) - */ - /* 680KiB */ - PREALLOC_NORMAL("BMM_Buffer", 0x00000000, 0x000AA000-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - - /* - * Display bins buffer for unit0 - */ - /* 4KiB */ - PREALLOC_NORMAL("DisplayBins0", 0x00000000, 0x00001000-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - - /* - * Display bins buffer for unit1 - */ - /* 4KiB */ - PREALLOC_NORMAL("DisplayBins1", 0x00000000, 0x00001000-1, - IORESOURCE_MEM) - - /* - * AVFS: player HAL memory - */ - /* 945K * 3 for playback */ - PREALLOC_NORMAL("AvfsDmaMem", 0x00000000, 0x002c4c00-1, IORESOURCE_MEM) - - /* - * PMEM - */ - /* Persistent memory for diagnostics (64KiB) */ - PREALLOC_PMEM("DiagPersistentMemory", 0x00000000, 0x10000-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - - /* - * Smartcard - */ - /* Read and write buffers for Internal/External cards (10KiB) */ - PREALLOC_NORMAL("SmartCardInfo", 0x00000000, 0x2800-1, IORESOURCE_MEM) - - /* - * KAVNET - */ - /* NP Reset Vector - must be of the form xxCxxxxx (4KiB) */ - PREALLOC_NORMAL("NP_Reset_Vector", 0x27c00000, 0x27c01000-1, - IORESOURCE_MEM) - /* NP Image - must be video bank 1 (320KiB) */ - PREALLOC_NORMAL("NP_Image", 0x27020000, 0x27070000-1, IORESOURCE_MEM) - /* NP IPC - must be video bank 2 (512KiB) */ - PREALLOC_NORMAL("NP_IPC", 0x63500000, 0x63580000-1, IORESOURCE_MEM) - - /* - * NAND Flash - */ - /* 10KiB */ - PREALLOC_NORMAL("NandFlash", NAND_FLASH_BASE, NAND_FLASH_BASE+0x400-1, - IORESOURCE_MEM) - - /* - * Add other resources here - */ - - /* - * End of Resource marker - */ - { - .flags = 0, - }, -}; diff --git a/arch/mips/powertv/asic/prealloc-cronuslite.c b/arch/mips/powertv/asic/prealloc-cronuslite.c deleted file mode 100644 index a7937ba7b4c..00000000000 --- a/arch/mips/powertv/asic/prealloc-cronuslite.c +++ /dev/null @@ -1,174 +0,0 @@ -/* - * Memory pre-allocations for Cronus Lite boxes. - * - * Copyright (C) 2005-2009 Scientific-Atlanta, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - * - * Author: Ken Eppinett - * David Schleef <ds@schleef.org> - */ - -#include <linux/init.h> -#include <linux/ioport.h> -#include <asm/mach-powertv/asic.h> -#include "prealloc.h" - -/* - * NON_DVR_CAPABLE CRONUSLITE RESOURCES - */ -struct resource non_dvr_cronuslite_resources[] __initdata = -{ - /* - * VIDEO2 / LX2 - */ - /* Delta-Mu 1 image (2MiB) */ - PREALLOC_NORMAL("ST231aImage", 0x60000000, 0x60200000-1, - IORESOURCE_MEM) - /* Delta-Mu 1 monitor (8KiB) */ - PREALLOC_NORMAL("ST231aMonitor", 0x60200000, 0x60202000-1, - IORESOURCE_MEM) - /* Delta-Mu 1 RAM (~29.9MiB (32MiB - (2MiB + 8KiB))) */ - PREALLOC_NORMAL("MediaMemory1", 0x60202000, 0x62000000-1, - IORESOURCE_MEM) - - /* - * Sysaudio Driver - */ - /* DSP code and data images (1MiB) */ - PREALLOC_NORMAL("DSP_Image_Buff", 0x00000000, 0x00100000-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - /* ADSC CPU PCM buffer (40KiB) */ - PREALLOC_NORMAL("ADSC_CPU_PCM_Buff", 0x00000000, 0x0000A000-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - /* ADSC AUX buffer (128KiB) */ - PREALLOC_NORMAL("ADSC_AUX_Buff", 0x00000000, 0x00020000-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - /* ADSC Main buffer (128KiB) */ - PREALLOC_NORMAL("ADSC_Main_Buff", 0x00000000, 0x00020000-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - - /* - * STAVEM driver/STAPI - * - * This memory area is used for allocating buffers for Video decoding - * purposes. Allocation/De-allocation within this buffer is managed - * by the STAVMEM driver of the STAPI. They could be Decimated - * Picture Buffers, Intermediate Buffers, as deemed necessary for - * video decoding purposes, for any video decoders on Zeus. - */ - /* 6MiB */ - PREALLOC_NORMAL("AVMEMPartition0", 0x00000000, 0x00600000-1, - IORESOURCE_MEM) - - /* - * DOCSIS Subsystem - */ - /* 7MiB */ - PREALLOC_DOCSIS("Docsis", 0x67500000, 0x67c00000-1, IORESOURCE_MEM) - - /* - * GHW HAL Driver - */ - /* PowerTV Graphics Heap (14MiB) */ - PREALLOC_NORMAL("GraphicsHeap", 0x62700000, 0x63500000-1, - IORESOURCE_MEM) - - /* - * multi com buffer area - */ - /* 128KiB */ - PREALLOC_NORMAL("MulticomSHM", 0x26000000, 0x26020000-1, - IORESOURCE_MEM) - - /* - * DMA Ring buffer (don't need recording buffers) - */ - /* 680KiB */ - PREALLOC_NORMAL("BMM_Buffer", 0x00000000, 0x000AA000-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - - /* - * Display bins buffer for unit0 - */ - /* 4KiB */ - PREALLOC_NORMAL("DisplayBins0", 0x00000000, 0x00001000-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - - /* - * Display bins buffer for unit1 - */ - /* 4KiB */ - PREALLOC_NORMAL("DisplayBins1", 0x00000000, 0x00001000-1, - IORESOURCE_MEM) - - /* - * AVFS: player HAL memory - */ - /* 945K * 3 for playback */ - PREALLOC_NORMAL("AvfsDmaMem", 0x00000000, 0x002c4c00-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - - /* - * PMEM - */ - /* Persistent memory for diagnostics (64KiB) */ - PREALLOC_PMEM("DiagPersistentMemory", 0x00000000, 0x10000-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - - /* - * Smartcard - */ - /* Read and write buffers for Internal/External cards (10KiB) */ - PREALLOC_NORMAL("SmartCardInfo", 0x00000000, 0x2800-1, IORESOURCE_MEM) - - /* - * KAVNET - */ - /* NP Reset Vector - must be of the form xxCxxxxx (4KiB) */ - PREALLOC_NORMAL("NP_Reset_Vector", 0x27c00000, 0x27c01000-1, - IORESOURCE_MEM) - /* NP Image - must be video bank 1 (320KiB) */ - PREALLOC_NORMAL("NP_Image", 0x27020000, 0x27070000-1, IORESOURCE_MEM) - /* NP IPC - must be video bank 2 (512KiB) */ - PREALLOC_NORMAL("NP_IPC", 0x63500000, 0x63580000-1, IORESOURCE_MEM) - - /* - * NAND Flash - */ - /* 10KiB */ - PREALLOC_NORMAL("NandFlash", NAND_FLASH_BASE, NAND_FLASH_BASE+0x400-1, - IORESOURCE_MEM) - - /* - * TFTPBuffer - * - * This buffer is used in some minimal configurations (e.g. two-way - * loader) for storing software images - */ - PREALLOC_TFTP("TFTPBuffer", 0x00000000, MEBIBYTE(80)-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - - /* - * Add other resources here - */ - - /* - * End of Resource marker - */ - { - .flags = 0, - }, -}; diff --git a/arch/mips/powertv/asic/prealloc-gaia.c b/arch/mips/powertv/asic/prealloc-gaia.c deleted file mode 100644 index 2303bbfe6b8..00000000000 --- a/arch/mips/powertv/asic/prealloc-gaia.c +++ /dev/null @@ -1,589 +0,0 @@ -/* - * Memory pre-allocations for Gaia boxes. - * - * Copyright (C) 2005-2009 Scientific-Atlanta, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - * - * Author: David VomLehn - */ - -#include <linux/init.h> -#include <asm/mach-powertv/asic.h> - -/* - * DVR_CAPABLE GAIA RESOURCES - */ -struct resource dvr_gaia_resources[] __initdata = { - /* - * - * VIDEO1 / LX1 - * - */ - { - .name = "ST231aImage", /* Delta-Mu 1 image and ram */ - .start = 0x24000000, - .end = 0x241FFFFF, /* 2MiB */ - .flags = IORESOURCE_MEM, - }, - { - .name = "ST231aMonitor", /* 8KiB block ST231a monitor */ - .start = 0x24200000, - .end = 0x24201FFF, - .flags = IORESOURCE_MEM, - }, - { - .name = "MediaMemory1", - .start = 0x24202000, - .end = 0x25FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */ - .flags = IORESOURCE_MEM, - }, - /* - * - * VIDEO2 / LX2 - * - */ - { - .name = "ST231bImage", /* Delta-Mu 2 image and ram */ - .start = 0x60000000, - .end = 0x601FFFFF, /* 2MiB */ - .flags = IORESOURCE_IO, - }, - { - .name = "ST231bMonitor", /* 8KiB block ST231b monitor */ - .start = 0x60200000, - .end = 0x60201FFF, - .flags = IORESOURCE_IO, - }, - { - .name = "MediaMemory2", - .start = 0x60202000, - .end = 0x61FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */ - .flags = IORESOURCE_IO, - }, - /* - * - * Sysaudio Driver - * - * This driver requires: - * - * Arbitrary Based Buffers: - * DSP_Image_Buff - DSP code and data images (1MB) - * ADSC_CPU_PCM_Buff - ADSC CPU PCM buffer (40KB) - * ADSC_AUX_Buff - ADSC AUX buffer (16KB) - * ADSC_Main_Buff - ADSC Main buffer (16KB) - * - */ - { - .name = "DSP_Image_Buff", - .start = 0x00000000, - .end = 0x000FFFFF, - .flags = IORESOURCE_MEM, - }, - { - .name = "ADSC_CPU_PCM_Buff", - .start = 0x00000000, - .end = 0x00009FFF, - .flags = IORESOURCE_MEM, - }, - { - .name = "ADSC_AUX_Buff", - .start = 0x00000000, - .end = 0x00003FFF, - .flags = IORESOURCE_MEM, - }, - { - .name = "ADSC_Main_Buff", - .start = 0x00000000, - .end = 0x00003FFF, - .flags = IORESOURCE_MEM, - }, - /* - * - * STAVEM driver/STAPI - * - * This driver requires: - * - * Arbitrary Based Buffers: - * This memory area is used for allocating buffers for Video decoding - * purposes. Allocation/De-allocation within this buffer is managed - * by the STAVMEM driver of the STAPI. They could be Decimated - * Picture Buffers, Intermediate Buffers, as deemed necessary for - * video decoding purposes, for any video decoders on Zeus. - * - */ - { - .name = "AVMEMPartition0", - .start = 0x63580000, - .end = 0x64180000 - 1, /* 12 MB total */ - .flags = IORESOURCE_IO, - }, - /* - * - * DOCSIS Subsystem - * - * This driver requires: - * - * Arbitrary Based Buffers: - * Docsis - - * - */ - { - .name = "Docsis", - .start = 0x62000000, - .end = 0x62700000 - 1, /* 7 MB total */ - .flags = IORESOURCE_IO, - }, - /* - * - * GHW HAL Driver - * - * This driver requires: - * - * Arbitrary Based Buffers: - * GraphicsHeap - PowerTV Graphics Heap - * - */ - { - .name = "GraphicsHeap", - .start = 0x62700000, - .end = 0x63500000 - 1, /* 14 MB total */ - .flags = IORESOURCE_IO, - }, - /* - * - * multi com buffer area - * - * This driver requires: - * - * Arbitrary Based Buffers: - * Docsis - - * - */ - { - .name = "MulticomSHM", - .start = 0x26000000, - .end = 0x26020000 - 1, - .flags = IORESOURCE_MEM, - }, - /* - * - * DMA Ring buffer - * - * This driver requires: - * - * Arbitrary Based Buffers: - * Docsis - - * - */ - { - .name = "BMM_Buffer", - .start = 0x00000000, - .end = 0x00280000 - 1, - .flags = IORESOURCE_MEM, - }, - /* - * - * Display bins buffer for unit0 - * - * This driver requires: - * - * Arbitrary Based Buffers: - * Display Bins for unit0 - * - */ - { - .name = "DisplayBins0", - .start = 0x00000000, - .end = 0x00000FFF, /* 4 KB total */ - .flags = IORESOURCE_MEM, - }, - /* - * - * Display bins buffer - * - * This driver requires: - * - * Arbitrary Based Buffers: - * Display Bins for unit1 - * - */ - { - .name = "DisplayBins1", - .start = 0x64AD4000, - .end = 0x64AD5000 - 1, /* 4 KB total */ - .flags = IORESOURCE_IO, - }, - /* - * - * ITFS - * - * This driver requires: - * - * Arbitrary Based Buffers: - * Docsis - - * - */ - { - .name = "ITFS", - .start = 0x64180000, - /* 815,104 bytes each for 2 ITFS partitions. */ - .end = 0x6430DFFF, - .flags = IORESOURCE_IO, - }, - /* - * - * AVFS - * - * This driver requires: - * - * Arbitrary Based Buffers: - * Docsis - - * - */ - { - .name = "AvfsDmaMem", - .start = 0x6430E000, - /* (945K * 8) = (128K *3) 5 playbacks / 3 server */ - .end = 0x64AD0000 - 1, - .flags = IORESOURCE_IO, - }, - { - .name = "AvfsFileSys", - .start = 0x64AD0000, - .end = 0x64AD1000 - 1, /* 4K */ - .flags = IORESOURCE_IO, - }, - /* - * - * Smartcard - * - * This driver requires: - * - * Arbitrary Based Buffers: - * Read and write buffers for Internal/External cards - * - */ - { - .name = "SmartCardInfo", - .start = 0x64AD1000, - .end = 0x64AD3800 - 1, - .flags = IORESOURCE_IO, - }, - /* - * - * KAVNET - * NP Reset Vector - must be of the form xxCxxxxx - * NP Image - must be video bank 1 - * NP IPC - must be video bank 2 - */ - { - .name = "NP_Reset_Vector", - .start = 0x27c00000, - .end = 0x27c01000 - 1, - .flags = IORESOURCE_MEM, - }, - { - .name = "NP_Image", - .start = 0x27020000, - .end = 0x27060000 - 1, - .flags = IORESOURCE_MEM, - }, - { - .name = "NP_IPC", - .start = 0x63500000, - .end = 0x63580000 - 1, - .flags = IORESOURCE_IO, - }, - /* - * Add other resources here - */ - { }, -}; - -/* - * NON_DVR_CAPABLE GAIA RESOURCES - */ -struct resource non_dvr_gaia_resources[] __initdata = { - /* - * - * VIDEO1 / LX1 - * - */ - { - .name = "ST231aImage", /* Delta-Mu 1 image and ram */ - .start = 0x24000000, - .end = 0x241FFFFF, /* 2MiB */ - .flags = IORESOURCE_MEM, - }, - { - .name = "ST231aMonitor", /* 8KiB block ST231a monitor */ - .start = 0x24200000, - .end = 0x24201FFF, - .flags = IORESOURCE_MEM, - }, - { - .name = "MediaMemory1", - .start = 0x24202000, - .end = 0x25FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */ - .flags = IORESOURCE_MEM, - }, - /* - * - * VIDEO2 / LX2 - * - */ - { - .name = "ST231bImage", /* Delta-Mu 2 image and ram */ - .start = 0x60000000, - .end = 0x601FFFFF, /* 2MiB */ - .flags = IORESOURCE_IO, - }, - { - .name = "ST231bMonitor", /* 8KiB block ST231b monitor */ - .start = 0x60200000, - .end = 0x60201FFF, - .flags = IORESOURCE_IO, - }, - { - .name = "MediaMemory2", - .start = 0x60202000, - .end = 0x61FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */ - .flags = IORESOURCE_IO, - }, - /* - * - * Sysaudio Driver - * - * This driver requires: - * - * Arbitrary Based Buffers: - * DSP_Image_Buff - DSP code and data images (1MB) - * ADSC_CPU_PCM_Buff - ADSC CPU PCM buffer (40KB) - * ADSC_AUX_Buff - ADSC AUX buffer (16KB) - * ADSC_Main_Buff - ADSC Main buffer (16KB) - * - */ - { - .name = "DSP_Image_Buff", - .start = 0x00000000, - .end = 0x000FFFFF, - .flags = IORESOURCE_MEM, - }, - { - .name = "ADSC_CPU_PCM_Buff", - .start = 0x00000000, - .end = 0x00009FFF, - .flags = IORESOURCE_MEM, - }, - { - .name = "ADSC_AUX_Buff", - .start = 0x00000000, - .end = 0x00003FFF, - .flags = IORESOURCE_MEM, - }, - { - .name = "ADSC_Main_Buff", - .start = 0x00000000, - .end = 0x00003FFF, - .flags = IORESOURCE_MEM, - }, - /* - * - * STAVEM driver/STAPI - * - * This driver requires: - * - * Arbitrary Based Buffers: - * This memory area is used for allocating buffers for Video decoding - * purposes. Allocation/De-allocation within this buffer is managed - * by the STAVMEM driver of the STAPI. They could be Decimated - * Picture Buffers, Intermediate Buffers, as deemed necessary for - * video decoding purposes, for any video decoders on Zeus. - * - */ - { - .name = "AVMEMPartition0", - .start = 0x63580000, - .end = 0x64180000 - 1, /* 12 MB total */ - .flags = IORESOURCE_IO, - }, - /* - * - * DOCSIS Subsystem - * - * This driver requires: - * - * Arbitrary Based Buffers: - * Docsis - - * - */ - { - .name = "Docsis", - .start = 0x62000000, - .end = 0x62700000 - 1, /* 7 MB total */ - .flags = IORESOURCE_IO, - }, - /* - * - * GHW HAL Driver - * - * This driver requires: - * - * Arbitrary Based Buffers: - * GraphicsHeap - PowerTV Graphics Heap - * - */ - { - .name = "GraphicsHeap", - .start = 0x62700000, - .end = 0x63500000 - 1, /* 14 MB total */ - .flags = IORESOURCE_IO, - }, - /* - * - * multi com buffer area - * - * This driver requires: - * - * Arbitrary Based Buffers: - * Docsis - - * - */ - { - .name = "MulticomSHM", - .start = 0x26000000, - .end = 0x26020000 - 1, - .flags = IORESOURCE_MEM, - }, - /* - * - * DMA Ring buffer - * - * This driver requires: - * - * Arbitrary Based Buffers: - * Docsis - - * - */ - { - .name = "BMM_Buffer", - .start = 0x00000000, - .end = 0x000AA000 - 1, - .flags = IORESOURCE_MEM, - }, - /* - * - * Display bins buffer for unit0 - * - * This driver requires: - * - * Arbitrary Based Buffers: - * Display Bins for unit0 - * - */ - { - .name = "DisplayBins0", - .start = 0x00000000, - .end = 0x00000FFF, /* 4 KB total */ - .flags = IORESOURCE_MEM, - }, - /* - * - * Display bins buffer - * - * This driver requires: - * - * Arbitrary Based Buffers: - * Display Bins for unit1 - * - */ - { - .name = "DisplayBins1", - .start = 0x64AD4000, - .end = 0x64AD5000 - 1, /* 4 KB total */ - .flags = IORESOURCE_IO, - }, - /* - * - * AVFS: player HAL memory - * - * - */ - { - .name = "AvfsDmaMem", - .start = 0x6430E000, - .end = 0x645D2C00 - 1, /* 945K * 3 for playback */ - .flags = IORESOURCE_IO, - }, - /* - * - * PMEM - * - * This driver requires: - * - * Arbitrary Based Buffers: - * Persistent memory for diagnostics. - * - */ - { - .name = "DiagPersistentMemory", - .start = 0x00000000, - .end = 0x10000 - 1, - .flags = IORESOURCE_MEM, - }, - /* - * - * Smartcard - * - * This driver requires: - * - * Arbitrary Based Buffers: - * Read and write buffers for Internal/External cards - * - */ - { - .name = "SmartCardInfo", - .start = 0x64AD1000, - .end = 0x64AD3800 - 1, - .flags = IORESOURCE_IO, - }, - /* - * - * KAVNET - * NP Reset Vector - must be of the form xxCxxxxx - * NP Image - must be video bank 1 - * NP IPC - must be video bank 2 - */ - { - .name = "NP_Reset_Vector", - .start = 0x27c00000, - .end = 0x27c01000 - 1, - .flags = IORESOURCE_MEM, - }, - { - .name = "NP_Image", - .start = 0x27020000, - .end = 0x27060000 - 1, - .flags = IORESOURCE_MEM, - }, - { - .name = "NP_IPC", - .start = 0x63500000, - .end = 0x63580000 - 1, - .flags = IORESOURCE_IO, - }, - { }, -}; diff --git a/arch/mips/powertv/asic/prealloc-zeus.c b/arch/mips/powertv/asic/prealloc-zeus.c deleted file mode 100644 index 6e76f09c68d..00000000000 --- a/arch/mips/powertv/asic/prealloc-zeus.c +++ /dev/null @@ -1,304 +0,0 @@ -/* - * Memory pre-allocations for Zeus boxes. - * - * Copyright (C) 2005-2009 Scientific-Atlanta, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - * - * Author: Ken Eppinett - * David Schleef <ds@schleef.org> - */ - -#include <linux/init.h> -#include <linux/ioport.h> -#include <asm/mach-powertv/asic.h> -#include "prealloc.h" - -/* - * DVR_CAPABLE RESOURCES - */ -struct resource dvr_zeus_resources[] __initdata = -{ - /* - * VIDEO1 / LX1 - */ - /* Delta-Mu 1 image (2MiB) */ - PREALLOC_NORMAL("ST231aImage", 0x20000000, 0x20200000-1, - IORESOURCE_MEM) - /* Delta-Mu 1 monitor (8KiB) */ - PREALLOC_NORMAL("ST231aMonitor", 0x20200000, 0x20202000-1, - IORESOURCE_MEM) - /* Delta-Mu 1 RAM (~29.9MiB (32MiB - (2MiB + 8KiB))) */ - PREALLOC_NORMAL("MediaMemory1", 0x20202000, 0x22000000-1, - IORESOURCE_MEM) - - /* - * VIDEO2 / LX2 - */ - /* Delta-Mu 2 image (2MiB) */ - PREALLOC_NORMAL("ST231bImage", 0x30000000, 0x30200000-1, - IORESOURCE_MEM) - /* Delta-Mu 2 monitor (8KiB) */ - PREALLOC_NORMAL("ST231bMonitor", 0x30200000, 0x30202000-1, - IORESOURCE_MEM) - /* Delta-Mu 2 RAM (~29.9MiB (32MiB - (2MiB + 8KiB))) */ - PREALLOC_NORMAL("MediaMemory2", 0x30202000, 0x32000000-1, - IORESOURCE_MEM) - - /* - * Sysaudio Driver - */ - /* DSP code and data images (1MiB) */ - PREALLOC_NORMAL("DSP_Image_Buff", 0x00000000, 0x00100000-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - /* ADSC CPU PCM buffer (40KiB) */ - PREALLOC_NORMAL("ADSC_CPU_PCM_Buff", 0x00000000, 0x0000A000-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - /* ADSC AUX buffer (16KiB) */ - PREALLOC_NORMAL("ADSC_AUX_Buff", 0x00000000, 0x00004000-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - /* ADSC Main buffer (16KiB) */ - PREALLOC_NORMAL("ADSC_Main_Buff", 0x00000000, 0x00004000-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - - /* - * STAVEM driver/STAPI - * - * This memory area is used for allocating buffers for Video decoding - * purposes. Allocation/De-allocation within this buffer is managed - * by the STAVMEM driver of the STAPI. They could be Decimated - * Picture Buffers, Intermediate Buffers, as deemed necessary for - * video decoding purposes, for any video decoders on Zeus. - */ - /* 12MiB */ - PREALLOC_NORMAL("AVMEMPartition0", 0x00000000, 0x00c00000-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - - /* - * DOCSIS Subsystem - */ - /* 7MiB */ - PREALLOC_DOCSIS("Docsis", 0x40100000, 0x40800000-1, IORESOURCE_MEM) - - /* - * GHW HAL Driver - */ - /* PowerTV Graphics Heap (14MiB) */ - PREALLOC_NORMAL("GraphicsHeap", 0x46900000, 0x47700000-1, - IORESOURCE_MEM) - - /* - * multi com buffer area - */ - /* 128KiB */ - PREALLOC_NORMAL("MulticomSHM", 0x47900000, 0x47920000-1, - IORESOURCE_MEM) - - /* - * DMA Ring buffer - */ - /* 2.5MiB */ - PREALLOC_NORMAL("BMM_Buffer", 0x00000000, 0x00280000-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - - /* - * Display bins buffer for unit0 - */ - /* 4KiB */ - PREALLOC_NORMAL("DisplayBins0", 0x00000000, 0x00001000-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - - /* - * Display bins buffer for unit1 - */ - /* 4KiB */ - PREALLOC_NORMAL("DisplayBins1", 0x00000000, 0x00001000-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - - /* - * ITFS - */ - /* 815,104 bytes each for 2 ITFS partitions. */ - PREALLOC_NORMAL("ITFS", 0x00000000, 0x0018E000-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - - /* - * AVFS - */ - /* (945K * 8) = (128K * 3) 5 playbacks / 3 server */ - PREALLOC_NORMAL("AvfsDmaMem", 0x00000000, 0x007c2000-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - /* 4KiB */ - PREALLOC_NORMAL("AvfsFileSys", 0x00000000, 0x00001000-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - - /* - * PMEM - */ - /* Persistent memory for diagnostics (64KiB) */ - PREALLOC_PMEM("DiagPersistentMemory", 0x00000000, 0x10000-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - - /* - * Smartcard - */ - /* Read and write buffers for Internal/External cards (10KiB) */ - PREALLOC_NORMAL("SmartCardInfo", 0x00000000, 0x2800-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - - /* - * TFTPBuffer - * - * This buffer is used in some minimal configurations (e.g. two-way - * loader) for storing software images - */ - PREALLOC_TFTP("TFTPBuffer", 0x00000000, MEBIBYTE(80)-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - - /* - * Add other resources here - */ - - /* - * End of Resource marker - */ - { - .flags = 0, - }, -}; - -/* - * NON_DVR_CAPABLE ZEUS RESOURCES - */ -struct resource non_dvr_zeus_resources[] __initdata = -{ - /* - * VIDEO1 / LX1 - */ - /* Delta-Mu 1 image (2MiB) */ - PREALLOC_NORMAL("ST231aImage", 0x20000000, 0x20200000-1, - IORESOURCE_MEM) - /* Delta-Mu 1 monitor (8KiB) */ - PREALLOC_NORMAL("ST231aMonitor", 0x20200000, 0x20202000-1, - IORESOURCE_MEM) - /* Delta-Mu 1 RAM (~29.9MiB (32MiB - (2MiB + 8KiB))) */ - PREALLOC_NORMAL("MediaMemory1", 0x20202000, 0x22000000-1, - IORESOURCE_MEM) - - /* - * Sysaudio Driver - */ - /* DSP code and data images (1MiB) */ - PREALLOC_NORMAL("DSP_Image_Buff", 0x00000000, 0x00100000-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - /* ADSC CPU PCM buffer (40KiB) */ - PREALLOC_NORMAL("ADSC_CPU_PCM_Buff", 0x00000000, 0x0000A000-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - /* ADSC AUX buffer (16KiB) */ - PREALLOC_NORMAL("ADSC_AUX_Buff", 0x00000000, 0x00004000-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - /* ADSC Main buffer (16KiB) */ - PREALLOC_NORMAL("ADSC_Main_Buff", 0x00000000, 0x00004000-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - - /* - * STAVEM driver/STAPI - */ - /* 6MiB */ - PREALLOC_NORMAL("AVMEMPartition0", 0x00000000, 0x00600000-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - - /* - * DOCSIS Subsystem - */ - /* 7MiB */ - PREALLOC_DOCSIS("Docsis", 0x40100000, 0x40800000-1, IORESOURCE_MEM) - - /* - * GHW HAL Driver - */ - /* PowerTV Graphics Heap (14MiB) */ - PREALLOC_NORMAL("GraphicsHeap", 0x46900000, 0x47700000-1, - IORESOURCE_MEM) - - /* - * multi com buffer area - */ - /* 128KiB */ - PREALLOC_NORMAL("MulticomSHM", 0x47900000, 0x47920000-1, - IORESOURCE_MEM) - - /* - * DMA Ring buffer - */ - /* 2.5MiB */ - PREALLOC_NORMAL("BMM_Buffer", 0x00000000, 0x00280000-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - - /* - * Display bins buffer for unit0 - */ - /* 4KiB */ - PREALLOC_NORMAL("DisplayBins0", 0x00000000, 0x00001000-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - - /* - * AVFS: player HAL memory - */ - /* 945K * 3 for playback */ - PREALLOC_NORMAL("AvfsDmaMem", 0x00000000, 0x002c4c00-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - - /* - * PMEM - */ - /* Persistent memory for diagnostics (64KiB) */ - PREALLOC_PMEM("DiagPersistentMemory", 0x00000000, 0x10000-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - - /* - * Smartcard - */ - /* Read and write buffers for Internal/External cards (10KiB) */ - PREALLOC_NORMAL("SmartCardInfo", 0x00000000, 0x2800-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - - /* - * NAND Flash - */ - /* 10KiB */ - PREALLOC_NORMAL("NandFlash", NAND_FLASH_BASE, NAND_FLASH_BASE+0x400-1, - IORESOURCE_MEM) - - /* - * TFTPBuffer - * - * This buffer is used in some minimal configurations (e.g. two-way - * loader) for storing software images - */ - PREALLOC_TFTP("TFTPBuffer", 0x00000000, MEBIBYTE(80)-1, - (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT)) - - /* - * Add other resources here - */ - - /* - * End of Resource marker - */ - { - .flags = 0, - }, -}; diff --git a/arch/mips/powertv/asic/prealloc.h b/arch/mips/powertv/asic/prealloc.h deleted file mode 100644 index 8e682df1785..00000000000 --- a/arch/mips/powertv/asic/prealloc.h +++ /dev/null @@ -1,70 +0,0 @@ -/* - * Definitions for memory preallocations - * - * Copyright (C) 2005-2009 Scientific-Atlanta, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef _ARCH_MIPS_POWERTV_ASIC_PREALLOC_H -#define _ARCH_MIPS_POWERTV_ASIC_PREALLOC_H - -#define KIBIBYTE(n) ((n) * 1024) /* Number of kibibytes */ -#define MEBIBYTE(n) ((n) * KIBIBYTE(1024)) /* Number of mebibytes */ - -/* "struct resource" array element definition */ -#define PREALLOC(NAME, START, END, FLAGS) { \ - .name = (NAME), \ - .start = (START), \ - .end = (END), \ - .flags = (FLAGS) \ - }, - -/* Individual resources in the preallocated resource arrays are defined using - * macros. These macros are conditionally defined based on their - * corresponding kernel configuration flag: - * - CONFIG_PREALLOC_NORMAL: preallocate resources for a normal settop box - * - CONFIG_PREALLOC_TFTP: preallocate the TFTP download resource - * - CONFIG_PREALLOC_DOCSIS: preallocate the DOCSIS resource - * - CONFIG_PREALLOC_PMEM: reserve space for persistent memory - */ -#ifdef CONFIG_PREALLOC_NORMAL -#define PREALLOC_NORMAL(name, start, end, flags) \ - PREALLOC(name, start, end, flags) -#else -#define PREALLOC_NORMAL(name, start, end, flags) -#endif - -#ifdef CONFIG_PREALLOC_TFTP -#define PREALLOC_TFTP(name, start, end, flags) \ - PREALLOC(name, start, end, flags) -#else -#define PREALLOC_TFTP(name, start, end, flags) -#endif - -#ifdef CONFIG_PREALLOC_DOCSIS -#define PREALLOC_DOCSIS(name, start, end, flags) \ - PREALLOC(name, start, end, flags) -#else -#define PREALLOC_DOCSIS(name, start, end, flags) -#endif - -#ifdef CONFIG_PREALLOC_PMEM -#define PREALLOC_PMEM(name, start, end, flags) \ - PREALLOC(name, start, end, flags) -#else -#define PREALLOC_PMEM(name, start, end, flags) -#endif -#endif diff --git a/arch/mips/powertv/init.c b/arch/mips/powertv/init.c deleted file mode 100644 index 498926377e5..00000000000 --- a/arch/mips/powertv/init.c +++ /dev/null @@ -1,90 +0,0 @@ -/* - * Copyright (C) 1999, 2000, 2004, 2005 MIPS Technologies, Inc. - * All rights reserved. - * Authors: Carsten Langgaard <carstenl@mips.com> - * Maciej W. Rozycki <macro@mips.com> - * Portions copyright (C) 2009 Cisco Systems, Inc. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * PROM library initialisation code. - */ -#include <linux/init.h> -#include <linux/string.h> -#include <linux/kernel.h> - -#include <asm/bootinfo.h> -#include <linux/io.h> -#include <asm/cacheflush.h> -#include <asm/traps.h> - -#include <asm/mips-boards/generic.h> -#include <asm/mach-powertv/asic.h> - -#include "init.h" - -static int *_prom_envp; -unsigned long _prom_memsize; - -/* - * YAMON (32-bit PROM) pass arguments and environment as 32-bit pointer. - * This macro take care of sign extension, if running in 64-bit mode. - */ -#define prom_envp(index) ((char *)(long)_prom_envp[(index)]) - -char *prom_getenv(char *envname) -{ - char *result = NULL; - - if (_prom_envp != NULL) { - /* - * Return a pointer to the given environment variable. - * In 64-bit mode: we're using 64-bit pointers, but all pointers - * in the PROM structures are only 32-bit, so we need some - * workarounds, if we are running in 64-bit mode. - */ - int i, index = 0; - - i = strlen(envname); - - while (prom_envp(index)) { - if (strncmp(envname, prom_envp(index), i) == 0) { - result = prom_envp(index + 1); - break; - } - index += 2; - } - } - - return result; -} - -void __init prom_init(void) -{ - int prom_argc; - char *prom_argv; - - prom_argc = fw_arg0; - prom_argv = (char *) fw_arg1; - _prom_envp = (int *) fw_arg2; - _prom_memsize = (unsigned long) fw_arg3; - - if (prom_argc == 1) { - strlcat(arcs_cmdline, " ", COMMAND_LINE_SIZE); - strlcat(arcs_cmdline, prom_argv, COMMAND_LINE_SIZE); - } - - configure_platform(); - prom_meminit(); -} diff --git a/arch/mips/powertv/init.h b/arch/mips/powertv/init.h deleted file mode 100644 index c1a8bd0dbe4..00000000000 --- a/arch/mips/powertv/init.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * Definitions from powertv init.c file - * - * Copyright (C) 2009 Cisco Systems, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - * - * Author: David VomLehn - */ - -#ifndef _POWERTV_INIT_H -#define _POWERTV_INIT_H -extern unsigned long _prom_memsize; -extern void prom_meminit(void); -extern char *prom_getenv(char *name); -#endif diff --git a/arch/mips/powertv/ioremap.c b/arch/mips/powertv/ioremap.c deleted file mode 100644 index d060478aab0..00000000000 --- a/arch/mips/powertv/ioremap.c +++ /dev/null @@ -1,136 +0,0 @@ -/* - * ioremap.c - * - * Support for mapping between dma_addr_t values a phys_addr_t values. - * - * Copyright (C) 2005-2009 Scientific-Atlanta, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - * - * Author: David VomLehn <dvomlehn@cisco.com> - * - * Description: Defines the platform resources for the SA settop. - * - * NOTE: The bootloader allocates persistent memory at an address which is - * 16 MiB below the end of the highest address in KSEG0. All fixed - * address memory reservations must avoid this region. - */ - -#include <linux/kernel.h> -#include <linux/module.h> - -#include <asm/mach-powertv/ioremap.h> - -/* - * Define the sizes of and masks for grains in physical and DMA space. The - * values are the same but the types are not. - */ -#define IOR_PHYS_GRAIN ((phys_addr_t) 1 << IOR_LSBITS) -#define IOR_PHYS_GRAIN_MASK (IOR_PHYS_GRAIN - 1) - -#define IOR_DMA_GRAIN ((dma_addr_t) 1 << IOR_LSBITS) -#define IOR_DMA_GRAIN_MASK (IOR_DMA_GRAIN - 1) - -/* - * Values that, when accessed by an index derived from a phys_addr_t and - * added to phys_addr_t value, yield a DMA address - */ -struct ior_phys_to_dma _ior_phys_to_dma[IOR_NUM_PHYS_TO_DMA]; -EXPORT_SYMBOL(_ior_phys_to_dma); - -/* - * Values that, when accessed by an index derived from a dma_addr_t and - * added to that dma_addr_t value, yield a physical address - */ -struct ior_dma_to_phys _ior_dma_to_phys[IOR_NUM_DMA_TO_PHYS]; -EXPORT_SYMBOL(_ior_dma_to_phys); - -/** - * setup_dma_to_phys - set up conversion from DMA to physical addresses - * @dma_idx: Top IOR_LSBITS bits of the DMA address, i.e. an index - * into the array _dma_to_phys. - * @delta: Value that, when added to the DMA address, will yield the - * physical address - * @s: Number of bytes in the section of memory with the given delta - * between DMA and physical addresses. - */ -static void setup_dma_to_phys(dma_addr_t dma, phys_addr_t delta, dma_addr_t s) -{ - int dma_idx, first_idx, last_idx; - phys_addr_t first, last; - - /* - * Calculate the first and last indices, rounding the first up and - * the second down. - */ - first = dma & ~IOR_DMA_GRAIN_MASK; - last = (dma + s - 1) & ~IOR_DMA_GRAIN_MASK; - first_idx = first >> IOR_LSBITS; /* Convert to indices */ - last_idx = last >> IOR_LSBITS; - - for (dma_idx = first_idx; dma_idx <= last_idx; dma_idx++) - _ior_dma_to_phys[dma_idx].offset = delta >> IOR_DMA_SHIFT; -} - -/** - * setup_phys_to_dma - set up conversion from DMA to physical addresses - * @phys_idx: Top IOR_LSBITS bits of the DMA address, i.e. an index - * into the array _phys_to_dma. - * @delta: Value that, when added to the DMA address, will yield the - * physical address - * @s: Number of bytes in the section of memory with the given delta - * between DMA and physical addresses. - */ -static void setup_phys_to_dma(phys_addr_t phys, dma_addr_t delta, phys_addr_t s) -{ - int phys_idx, first_idx, last_idx; - phys_addr_t first, last; - - /* - * Calculate the first and last indices, rounding the first up and - * the second down. - */ - first = phys & ~IOR_PHYS_GRAIN_MASK; - last = (phys + s - 1) & ~IOR_PHYS_GRAIN_MASK; - first_idx = first >> IOR_LSBITS; /* Convert to indices */ - last_idx = last >> IOR_LSBITS; - - for (phys_idx = first_idx; phys_idx <= last_idx; phys_idx++) - _ior_phys_to_dma[phys_idx].offset = delta >> IOR_PHYS_SHIFT; -} - -/** - * ioremap_add_map - add to the physical and DMA address conversion arrays - * @phys: Process's view of the address of the start of the memory chunk - * @dma: DMA address of the start of the memory chunk - * @size: Size, in bytes, of the chunk of memory - * - * NOTE: It might be obvious, but the assumption is that all @size bytes have - * the same offset between the physical address and the DMA address. - */ -void ioremap_add_map(phys_addr_t phys, phys_addr_t dma, phys_addr_t size) -{ - if (size == 0) - return; - - if ((dma & IOR_DMA_GRAIN_MASK) != 0 || - (phys & IOR_PHYS_GRAIN_MASK) != 0 || - (size & IOR_PHYS_GRAIN_MASK) != 0) - pr_crit("Memory allocation must be in chunks of 0x%x bytes\n", - IOR_PHYS_GRAIN); - - setup_dma_to_phys(dma, phys - dma, size); - setup_phys_to_dma(phys, dma - phys, size); -} diff --git a/arch/mips/powertv/memory.c b/arch/mips/powertv/memory.c deleted file mode 100644 index bc2f3ca22b4..00000000000 --- a/arch/mips/powertv/memory.c +++ /dev/null @@ -1,353 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. - * Portions copyright (C) 2009 Cisco Systems, Inc. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * Apparently originally from arch/mips/malta-memory.c. Modified to work - * with the PowerTV bootloader. - */ -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/bootmem.h> -#include <linux/pfn.h> -#include <linux/string.h> - -#include <asm/bootinfo.h> -#include <asm/page.h> -#include <asm/sections.h> - -#include <asm/mach-powertv/asic.h> -#include <asm/mach-powertv/ioremap.h> - -#include "init.h" - -/* Memory constants */ -#define KIBIBYTE(n) ((n) * 1024) /* Number of kibibytes */ -#define MEBIBYTE(n) ((n) * KIBIBYTE(1024)) /* Number of mebibytes */ -#define DEFAULT_MEMSIZE MEBIBYTE(128) /* If no memsize provided */ - -#define BLDR_SIZE KIBIBYTE(256) /* Memory reserved for bldr */ -#define RV_SIZE MEBIBYTE(4) /* Size of reset vector */ - -#define LOW_MEM_END 0x20000000 /* Highest low memory address */ -#define BLDR_ALIAS 0x10000000 /* Bootloader address */ -#define RV_PHYS 0x1fc00000 /* Reset vector address */ -#define LOW_RAM_END RV_PHYS /* End of real RAM in low mem */ - -/* - * Very low-level conversion from processor physical address to device - * DMA address for the first bank of memory. - */ -#define PHYS_TO_DMA(paddr) ((paddr) + (CONFIG_LOW_RAM_DMA - LOW_RAM_ALIAS)) - -unsigned long ptv_memsize; - -/* - * struct low_mem_reserved - Items in low memory that are reserved - * @start: Physical address of item - * @size: Size, in bytes, of this item - * @is_aliased: True if this is RAM aliased from another location. If false, - * it is something other than aliased RAM and the RAM in the - * unaliased address is still visible outside of low memory. - */ -struct low_mem_reserved { - phys_addr_t start; - phys_addr_t size; - bool is_aliased; -}; - -/* - * Must be in ascending address order - */ -struct low_mem_reserved low_mem_reserved[] = { - {BLDR_ALIAS, BLDR_SIZE, true}, /* Bootloader RAM */ - {RV_PHYS, RV_SIZE, false}, /* Reset vector */ -}; - -/* - * struct mem_layout - layout of a piece of the system RAM - * @phys: Physical address of the start of this piece of RAM. This is the - * address at which both the processor and I/O devices see the - * RAM. - * @alias: Alias of this piece of memory in order to make it appear in - * the low memory part of the processor's address space. I/O - * devices don't see anything here. - * @size: Size, in bytes, of this piece of RAM - */ -struct mem_layout { - phys_addr_t phys; - phys_addr_t alias; - phys_addr_t size; -}; - -/* - * struct mem_layout_list - list descriptor for layouts of system RAM pieces - * @family: Specifies the family being described - * @n: Number of &struct mem_layout elements - * @layout: Pointer to the list of &mem_layout structures - */ -struct mem_layout_list { - enum family_type family; - size_t n; - struct mem_layout *layout; -}; - -static struct mem_layout f1500_layout[] = { - {0x20000000, 0x10000000, MEBIBYTE(256)}, -}; - -static struct mem_layout f4500_layout[] = { - {0x40000000, 0x10000000, MEBIBYTE(256)}, - {0x20000000, 0x20000000, MEBIBYTE(32)}, -}; - -static struct mem_layout f8500_layout[] = { - {0x40000000, 0x10000000, MEBIBYTE(256)}, - {0x20000000, 0x20000000, MEBIBYTE(32)}, - {0x30000000, 0x30000000, MEBIBYTE(32)}, -}; - -static struct mem_layout fx600_layout[] = { - {0x20000000, 0x10000000, MEBIBYTE(256)}, - {0x60000000, 0x60000000, MEBIBYTE(128)}, -}; - -static struct mem_layout_list layout_list[] = { - {FAMILY_1500, ARRAY_SIZE(f1500_layout), f1500_layout}, - {FAMILY_1500VZE, ARRAY_SIZE(f1500_layout), f1500_layout}, - {FAMILY_1500VZF, ARRAY_SIZE(f1500_layout), f1500_layout}, - {FAMILY_4500, ARRAY_SIZE(f4500_layout), f4500_layout}, - {FAMILY_8500, ARRAY_SIZE(f8500_layout), f8500_layout}, - {FAMILY_8500RNG, ARRAY_SIZE(f8500_layout), f8500_layout}, - {FAMILY_4600, ARRAY_SIZE(fx600_layout), fx600_layout}, - {FAMILY_4600VZA, ARRAY_SIZE(fx600_layout), fx600_layout}, - {FAMILY_8600, ARRAY_SIZE(fx600_layout), fx600_layout}, - {FAMILY_8600VZB, ARRAY_SIZE(fx600_layout), fx600_layout}, -}; - -/* If we can't determine the layout, use this */ -static struct mem_layout default_layout[] = { - {0x20000000, 0x10000000, MEBIBYTE(128)}, -}; - -/** - * register_non_ram - register low memory not available for RAM usage - */ -static __init void register_non_ram(void) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(low_mem_reserved); i++) - add_memory_region(low_mem_reserved[i].start, - low_mem_reserved[i].size, BOOT_MEM_RESERVED); -} - -/** - * get_memsize - get the size of memory as a single bank - */ -static phys_addr_t get_memsize(void) -{ - static char cmdline[COMMAND_LINE_SIZE] __initdata; - phys_addr_t memsize = 0; - char *memsize_str; - char *ptr; - - /* Check the command line first for a memsize directive */ - strcpy(cmdline, arcs_cmdline); - ptr = strstr(cmdline, "memsize="); - if (ptr && (ptr != cmdline) && (*(ptr - 1) != ' ')) - ptr = strstr(ptr, " memsize="); - - if (ptr) { - memsize = memparse(ptr + 8, &ptr); - } else { - /* otherwise look in the environment */ - memsize_str = prom_getenv("memsize"); - - if (memsize_str != NULL) { - pr_info("prom memsize = %s\n", memsize_str); - memsize = simple_strtol(memsize_str, NULL, 0); - } - - if (memsize == 0) { - if (_prom_memsize != 0) { - memsize = _prom_memsize; - pr_info("_prom_memsize = 0x%x\n", memsize); - /* add in memory that the bootloader doesn't - * report */ - memsize += BLDR_SIZE; - } else { - memsize = DEFAULT_MEMSIZE; - pr_info("Memsize not passed by bootloader, " - "defaulting to 0x%x\n", memsize); - } - } - } - - return memsize; -} - -/** - * register_low_ram - register an aliased section of RAM - * @p: Alias address of memory - * @n: Number of bytes in this section of memory - * - * Returns the number of bytes registered - * - */ -static __init phys_addr_t register_low_ram(phys_addr_t p, phys_addr_t n) -{ - phys_addr_t s; - int i; - phys_addr_t orig_n; - - orig_n = n; - - BUG_ON(p + n > RV_PHYS); - - for (i = 0; n != 0 && i < ARRAY_SIZE(low_mem_reserved); i++) { - phys_addr_t start; - phys_addr_t size; - - start = low_mem_reserved[i].start; - size = low_mem_reserved[i].size; - - /* Handle memory before this low memory section */ - if (p < start) { - phys_addr_t s; - s = min(n, start - p); - add_memory_region(p, s, BOOT_MEM_RAM); - p += s; - n -= s; - } - - /* Handle the low memory section itself. If it's aliased, - * we reduce the number of byes left, but if not, the RAM - * is available elsewhere and we don't reduce the number of - * bytes remaining. */ - if (p == start) { - if (low_mem_reserved[i].is_aliased) { - s = min(n, size); - n -= s; - p += s; - } else - p += n; - } - } - - return orig_n - n; -} - -/* - * register_ram - register real RAM - * @p: Address of memory as seen by devices - * @alias: If the memory is seen at an additional address by the processor, - * this will be the address, otherwise it is the same as @p. - * @n: Number of bytes in this section of memory - */ -static __init void register_ram(phys_addr_t p, phys_addr_t alias, - phys_addr_t n) -{ - /* - * If some or all of this memory has an alias, break it into the - * aliased and non-aliased portion. - */ - if (p != alias) { - phys_addr_t alias_size; - phys_addr_t registered; - - alias_size = min(n, LOW_RAM_END - alias); - registered = register_low_ram(alias, alias_size); - ioremap_add_map(alias, p, n); - n -= registered; - p += registered; - } - -#ifdef CONFIG_HIGHMEM - if (n != 0) { - add_memory_region(p, n, BOOT_MEM_RAM); - ioremap_add_map(p, p, n); - } -#endif -} - -/** - * register_address_space - register things in the address space - * @memsize: Number of bytes of RAM installed - * - * Takes the given number of bytes of RAM and registers as many of the regions, - * or partial regions, as it can. So, the default configuration might have - * two regions with 256 MiB each. If the memsize passed in on the command line - * is 384 MiB, it will register the first region with 256 MiB and the second - * with 128 MiB. - */ -static __init void register_address_space(phys_addr_t memsize) -{ - int i; - phys_addr_t size; - size_t n; - struct mem_layout *layout; - enum family_type family; - - /* - * Register all of the things that aren't available to the kernel as - * memory. - */ - register_non_ram(); - - /* Find the appropriate memory description */ - family = platform_get_family(); - - for (i = 0; i < ARRAY_SIZE(layout_list); i++) { - if (layout_list[i].family == family) - break; - } - - if (i == ARRAY_SIZE(layout_list)) { - n = ARRAY_SIZE(default_layout); - layout = default_layout; - } else { - n = layout_list[i].n; - layout = layout_list[i].layout; - } - - for (i = 0; memsize != 0 && i < n; i++) { - size = min(memsize, layout[i].size); - register_ram(layout[i].phys, layout[i].alias, size); - memsize -= size; - } -} - -void __init prom_meminit(void) -{ - ptv_memsize = get_memsize(); - register_address_space(ptv_memsize); -} - -void __init prom_free_prom_memory(void) -{ - unsigned long addr; - int i; - - for (i = 0; i < boot_mem_map.nr_map; i++) { - if (boot_mem_map.map[i].type != BOOT_MEM_ROM_DATA) - continue; - - addr = boot_mem_map.map[i].addr; - free_init_pages("prom memory", - addr, addr + boot_mem_map.map[i].size); - } -} diff --git a/arch/mips/powertv/pci/Makefile b/arch/mips/powertv/pci/Makefile deleted file mode 100644 index 2610a6af5b2..00000000000 --- a/arch/mips/powertv/pci/Makefile +++ /dev/null @@ -1,19 +0,0 @@ -# -# Copyright (C) 2009 Scientific-Atlanta, Inc. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -# - -obj-$(CONFIG_PCI) += fixup-powertv.o diff --git a/arch/mips/powertv/pci/fixup-powertv.c b/arch/mips/powertv/pci/fixup-powertv.c deleted file mode 100644 index d7ecbae64a6..00000000000 --- a/arch/mips/powertv/pci/fixup-powertv.c +++ /dev/null @@ -1,37 +0,0 @@ -#include <linux/init.h> -#include <linux/export.h> -#include <linux/pci.h> -#include <asm/mach-powertv/interrupts.h> -#include "powertv-pci.h" - -int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - return asic_pcie_map_irq(dev, slot, pin); -} - -/* Do platform specific device initialization at pci_enable_device() time */ -int pcibios_plat_dev_init(struct pci_dev *dev) -{ - return 0; -} - -/* - * asic_pcie_map_irq - * - * Parameters: - * *dev - pointer to a pci_dev structure (not used) - * slot - slot number (not used) - * pin - pin number (not used) - * - * Return Value: - * Returns: IRQ number (always the PCI Express IRQ number) - * - * Description: - * asic_pcie_map_irq will return the IRQ number of the PCI Express interrupt. - * - */ -int asic_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - return irq_pciexp; -} -EXPORT_SYMBOL(asic_pcie_map_irq); diff --git a/arch/mips/powertv/pci/powertv-pci.h b/arch/mips/powertv/pci/powertv-pci.h deleted file mode 100644 index 1b5886bbd75..00000000000 --- a/arch/mips/powertv/pci/powertv-pci.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * powertv-pci.c - * - * Copyright (C) 2009 Cisco Systems, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ -/* - * Local definitions for the powertv PCI code - */ - -#ifndef _POWERTV_PCI_POWERTV_PCI_H_ -#define _POWERTV_PCI_POWERTV_PCI_H_ -extern int asic_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin); -extern int asic_pcie_init(void); -extern int asic_pcie_init(void); - -extern int log_level; -#endif diff --git a/arch/mips/powertv/powertv-clock.h b/arch/mips/powertv/powertv-clock.h deleted file mode 100644 index d94c5431148..00000000000 --- a/arch/mips/powertv/powertv-clock.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * Copyright (C) 2009 Cisco Systems, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - * - * Author: David VomLehn - */ - -#ifndef _POWERTV_POWERTV_CLOCK_H -#define _POWERTV_POWERTV_CLOCK_H -extern int powertv_clockevent_init(void); -extern void powertv_clocksource_init(void); -extern unsigned int mips_get_pll_freq(void); -#endif diff --git a/arch/mips/powertv/powertv-usb.c b/arch/mips/powertv/powertv-usb.c deleted file mode 100644 index d845eace58e..00000000000 --- a/arch/mips/powertv/powertv-usb.c +++ /dev/null @@ -1,404 +0,0 @@ -/* - * powertv-usb.c - * - * Description: ASIC-specific USB device setup and shutdown - * - * Copyright (C) 2005-2009 Scientific-Atlanta, Inc. - * Copyright (C) 2009 Cisco Systems, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - * - * Author: Ken Eppinett - * David Schleef <ds@schleef.org> - * - * NOTE: The bootloader allocates persistent memory at an address which is - * 16 MiB below the end of the highest address in KSEG0. All fixed - * address memory reservations must avoid this region. - */ - -#include <linux/kernel.h> -#include <linux/export.h> -#include <linux/ioport.h> -#include <linux/platform_device.h> -#include <asm/mach-powertv/asic.h> -#include <asm/mach-powertv/interrupts.h> - -/* misc_clk_ctl1 values */ -#define MCC1_30MHZ_POWERUP_SELECT (1 << 14) -#define MCC1_DIV9 (1 << 13) -#define MCC1_ETHMIPS_POWERUP_SELECT (1 << 11) -#define MCC1_USB_POWERUP_SELECT (1 << 1) -#define MCC1_CLOCK108_POWERUP_SELECT (1 << 0) - -/* Possible values for clock select */ -#define MCC1_USB_CLOCK_HIGH_Z (0 << 4) -#define MCC1_USB_CLOCK_48MHZ (1 << 4) -#define MCC1_USB_CLOCK_24MHZ (2 << 4) -#define MCC1_USB_CLOCK_6MHZ (3 << 4) - -#define MCC1_CONFIG (MCC1_30MHZ_POWERUP_SELECT | \ - MCC1_DIV9 | \ - MCC1_ETHMIPS_POWERUP_SELECT | \ - MCC1_USB_POWERUP_SELECT | \ - MCC1_CLOCK108_POWERUP_SELECT) - -/* misc_clk_ctl2 values */ -#define MCC2_GMII_GCLK_TO_PAD (1 << 31) -#define MCC2_ETHER125_0_CLOCK_SELECT (1 << 29) -#define MCC2_RMII_0_CLOCK_SELECT (1 << 28) -#define MCC2_GMII_TX0_CLOCK_SELECT (1 << 27) -#define MCC2_GMII_RX0_CLOCK_SELECT (1 << 26) -#define MCC2_ETHER125_1_CLOCK_SELECT (1 << 24) -#define MCC2_RMII_1_CLOCK_SELECT (1 << 23) -#define MCC2_GMII_TX1_CLOCK_SELECT (1 << 22) -#define MCC2_GMII_RX1_CLOCK_SELECT (1 << 21) -#define MCC2_ETHER125_2_CLOCK_SELECT (1 << 19) -#define MCC2_RMII_2_CLOCK_SELECT (1 << 18) -#define MCC2_GMII_TX2_CLOCK_SELECT (1 << 17) -#define MCC2_GMII_RX2_CLOCK_SELECT (1 << 16) - -#define ETHER_CLK_CONFIG (MCC2_GMII_GCLK_TO_PAD | \ - MCC2_ETHER125_0_CLOCK_SELECT | \ - MCC2_RMII_0_CLOCK_SELECT | \ - MCC2_GMII_TX0_CLOCK_SELECT | \ - MCC2_GMII_RX0_CLOCK_SELECT | \ - MCC2_ETHER125_1_CLOCK_SELECT | \ - MCC2_RMII_1_CLOCK_SELECT | \ - MCC2_GMII_TX1_CLOCK_SELECT | \ - MCC2_GMII_RX1_CLOCK_SELECT | \ - MCC2_ETHER125_2_CLOCK_SELECT | \ - MCC2_RMII_2_CLOCK_SELECT | \ - MCC2_GMII_TX2_CLOCK_SELECT | \ - MCC2_GMII_RX2_CLOCK_SELECT) - -/* misc_clk_ctl2 definitions for Gaia */ -#define FSX4A_REF_SELECT (1 << 16) -#define FSX4B_REF_SELECT (1 << 17) -#define FSX4C_REF_SELECT (1 << 18) -#define DDR_PLL_REF_SELECT (1 << 19) -#define MIPS_PLL_REF_SELECT (1 << 20) - -/* Definitions for the QAM frequency select register FS432X4A4_QAM_CTL */ -#define QAM_FS_SDIV_SHIFT 29 -#define QAM_FS_MD_SHIFT 24 -#define QAM_FS_MD_MASK 0x1f /* Cut down to 5 bits */ -#define QAM_FS_PE_SHIFT 8 - -#define QAM_FS_DISABLE_DIVIDE_BY_3 (1 << 5) -#define QAM_FS_ENABLE_PROGRAM (1 << 4) -#define QAM_FS_ENABLE_OUTPUT (1 << 3) -#define QAM_FS_SELECT_TEST_BYPASS (1 << 2) -#define QAM_FS_DISABLE_DIGITAL_STANDBY (1 << 1) -#define QAM_FS_CHOOSE_FS (1 << 0) - -/* Definitions for fs432x4a_ctl register */ -#define QAM_FS_NSDIV_54MHZ (1 << 2) - -/* Definitions for bcm1_usb2_ctl register */ -#define BCM1_USB2_CTL_BISTOK (1 << 11) -#define BCM1_USB2_CTL_PORT2_SHIFT_JK (1 << 7) -#define BCM1_USB2_CTL_PORT1_SHIFT_JK (1 << 6) -#define BCM1_USB2_CTL_PORT2_FAST_EDGE (1 << 5) -#define BCM1_USB2_CTL_PORT1_FAST_EDGE (1 << 4) -#define BCM1_USB2_CTL_EHCI_PRT_PWR_ACTIVE_HIGH (1 << 1) -#define BCM1_USB2_CTL_APP_PRT_OVRCUR_IN_ACTIVE_HIGH (1 << 0) - -/* Definitions for crt_spare register */ -#define CRT_SPARE_PORT2_SHIFT_JK (1 << 21) -#define CRT_SPARE_PORT1_SHIFT_JK (1 << 20) -#define CRT_SPARE_PORT2_FAST_EDGE (1 << 19) -#define CRT_SPARE_PORT1_FAST_EDGE (1 << 18) -#define CRT_SPARE_DIVIDE_BY_9_FROM_432 (1 << 17) -#define CRT_SPARE_USB_DIVIDE_BY_9 (1 << 16) - -/* Definitions for usb2_stbus_obc register */ -#define USB_STBUS_OBC_STORE32_LOAD32 0x3 - -/* Definitions for usb2_stbus_mess_size register */ -#define USB2_STBUS_MESS_SIZE_2 0x1 /* 2 packets */ - -/* Definitions for usb2_stbus_chunk_size register */ -#define USB2_STBUS_CHUNK_SIZE_2 0x1 /* 2 packets */ - -/* Definitions for usb2_strap register */ -#define USB2_STRAP_HFREQ_SELECT 0x1 - -/* - * USB Host Resource Definition - */ - -static struct resource ehci_resources[] = { - { - .parent = &asic_resource, - .start = 0, - .end = 0xff, - .flags = IORESOURCE_MEM, - }, - { - .start = irq_usbehci, - .end = irq_usbehci, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 ehci_dmamask = 0xffffffffULL; - -static struct platform_device ehci_device = { - .name = "powertv-ehci", - .id = 0, - .num_resources = 2, - .resource = ehci_resources, - .dev = { - .dma_mask = &ehci_dmamask, - .coherent_dma_mask = 0xffffffff, - }, -}; - -static struct resource ohci_resources[] = { - { - .parent = &asic_resource, - .start = 0, - .end = 0xff, - .flags = IORESOURCE_MEM, - }, - { - .start = irq_usbohci, - .end = irq_usbohci, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 ohci_dmamask = 0xffffffffULL; - -static struct platform_device ohci_device = { - .name = "powertv-ohci", - .id = 0, - .num_resources = 2, - .resource = ohci_resources, - .dev = { - .dma_mask = &ohci_dmamask, - .coherent_dma_mask = 0xffffffff, - }, -}; - -static unsigned usb_users; -static DEFINE_SPINLOCK(usb_regs_lock); - -/* - * - * fs_update - set frequency synthesizer for USB - * @pe_bits Phase tap setting - * @md_bits Coarse selector bus for algorithm of phase tap - * @sdiv_bits Output divider setting - * @disable_div_by_3 Either QAM_FS_DISABLE_DIVIDE_BY_3 or zero - * @standby Either QAM_FS_DISABLE_DIGITAL_STANDBY or zero - * - * QAM frequency selection code, which affects the frequency at which USB - * runs. The frequency is calculated as: - * 2^15 * ndiv * Fin - * Fout = ------------------------------------------------------------ - * (sdiv * (ipe * (1 + md/32) - (ipe - 2^15)*(1 + (md + 1)/32))) - * where: - * Fin 54 MHz - * ndiv QAM_FS_NSDIV_54MHZ ? 8 : 16 - * sdiv 1 << (sdiv_bits + 1) - * ipe Same as pe_bits - * md A five-bit, two's-complement integer (range [-16, 15]), which - * is the lower 5 bits of md_bits. - */ -static void fs_update(u32 pe_bits, int md_bits, u32 sdiv_bits, - u32 disable_div_by_3, u32 standby) -{ - u32 val; - - val = ((sdiv_bits << QAM_FS_SDIV_SHIFT) | - ((md_bits & QAM_FS_MD_MASK) << QAM_FS_MD_SHIFT) | - (pe_bits << QAM_FS_PE_SHIFT) | - QAM_FS_ENABLE_OUTPUT | - standby | - disable_div_by_3); - asic_write(val, fs432x4b4_usb_ctl); - asic_write(val | QAM_FS_ENABLE_PROGRAM, fs432x4b4_usb_ctl); - asic_write(val | QAM_FS_ENABLE_PROGRAM | QAM_FS_CHOOSE_FS, - fs432x4b4_usb_ctl); -} - -/* - * usb_eye_configure - for optimizing the shape USB eye waveform - * @set: Bits to set in the register - * @clear: Bits to clear in the register; each bit with a one will - * be set in the register, zero bits will not be modified - */ -static void usb_eye_configure(u32 set, u32 clear) -{ - u32 old; - - old = asic_read(crt_spare); - old |= set; - old &= ~clear; - asic_write(old, crt_spare); -} - -/* - * platform_configure_usb - usb configuration based on platform type. - */ -static void platform_configure_usb(void) -{ - u32 bcm1_usb2_ctl_value; - enum asic_type asic_type; - unsigned long flags; - - spin_lock_irqsave(&usb_regs_lock, flags); - usb_users++; - - if (usb_users != 1) { - spin_unlock_irqrestore(&usb_regs_lock, flags); - return; - } - - asic_type = platform_get_asic(); - - switch (asic_type) { - case ASIC_ZEUS: - fs_update(0x0000, -15, 0x02, 0, 0); - bcm1_usb2_ctl_value = BCM1_USB2_CTL_EHCI_PRT_PWR_ACTIVE_HIGH | - BCM1_USB2_CTL_APP_PRT_OVRCUR_IN_ACTIVE_HIGH; - break; - - case ASIC_CRONUS: - case ASIC_CRONUSLITE: - usb_eye_configure(0, CRT_SPARE_USB_DIVIDE_BY_9); - fs_update(0x8000, -14, 0x03, QAM_FS_DISABLE_DIVIDE_BY_3, - QAM_FS_DISABLE_DIGITAL_STANDBY); - bcm1_usb2_ctl_value = BCM1_USB2_CTL_EHCI_PRT_PWR_ACTIVE_HIGH | - BCM1_USB2_CTL_APP_PRT_OVRCUR_IN_ACTIVE_HIGH; - break; - - case ASIC_CALLIOPE: - fs_update(0x0000, -15, 0x02, QAM_FS_DISABLE_DIVIDE_BY_3, - QAM_FS_DISABLE_DIGITAL_STANDBY); - - switch (platform_get_family()) { - case FAMILY_1500VZE: - break; - - case FAMILY_1500VZF: - usb_eye_configure(CRT_SPARE_PORT2_SHIFT_JK | - CRT_SPARE_PORT1_SHIFT_JK | - CRT_SPARE_PORT2_FAST_EDGE | - CRT_SPARE_PORT1_FAST_EDGE, 0); - break; - - default: - usb_eye_configure(CRT_SPARE_PORT2_SHIFT_JK | - CRT_SPARE_PORT1_SHIFT_JK, 0); - break; - } - - bcm1_usb2_ctl_value = BCM1_USB2_CTL_BISTOK | - BCM1_USB2_CTL_EHCI_PRT_PWR_ACTIVE_HIGH | - BCM1_USB2_CTL_APP_PRT_OVRCUR_IN_ACTIVE_HIGH; - break; - - case ASIC_GAIA: - fs_update(0x8000, -14, 0x03, QAM_FS_DISABLE_DIVIDE_BY_3, - QAM_FS_DISABLE_DIGITAL_STANDBY); - bcm1_usb2_ctl_value = BCM1_USB2_CTL_BISTOK | - BCM1_USB2_CTL_EHCI_PRT_PWR_ACTIVE_HIGH | - BCM1_USB2_CTL_APP_PRT_OVRCUR_IN_ACTIVE_HIGH; - break; - - default: - pr_err("Unknown ASIC type: %d\n", asic_type); - bcm1_usb2_ctl_value = 0; - break; - } - - /* turn on USB power */ - asic_write(0, usb2_strap); - /* Enable all OHCI interrupts */ - asic_write(bcm1_usb2_ctl_value, usb2_control); - /* usb2_stbus_obc store32/load32 */ - asic_write(USB_STBUS_OBC_STORE32_LOAD32, usb2_stbus_obc); - /* usb2_stbus_mess_size 2 packets */ - asic_write(USB2_STBUS_MESS_SIZE_2, usb2_stbus_mess_size); - /* usb2_stbus_chunk_size 2 packets */ - asic_write(USB2_STBUS_CHUNK_SIZE_2, usb2_stbus_chunk_size); - spin_unlock_irqrestore(&usb_regs_lock, flags); -} - -static void platform_unconfigure_usb(void) -{ - unsigned long flags; - - spin_lock_irqsave(&usb_regs_lock, flags); - usb_users--; - if (usb_users == 0) - asic_write(USB2_STRAP_HFREQ_SELECT, usb2_strap); - spin_unlock_irqrestore(&usb_regs_lock, flags); -} - -/* - * Set up the USB EHCI interface - */ -void platform_configure_usb_ehci() -{ - platform_configure_usb(); -} -EXPORT_SYMBOL(platform_configure_usb_ehci); - -/* - * Set up the USB OHCI interface - */ -void platform_configure_usb_ohci() -{ - platform_configure_usb(); -} -EXPORT_SYMBOL(platform_configure_usb_ohci); - -/* - * Shut the USB EHCI interface down - */ -void platform_unconfigure_usb_ehci() -{ - platform_unconfigure_usb(); -} -EXPORT_SYMBOL(platform_unconfigure_usb_ehci); - -/* - * Shut the USB OHCI interface down - */ -void platform_unconfigure_usb_ohci() -{ - platform_unconfigure_usb(); -} -EXPORT_SYMBOL(platform_unconfigure_usb_ohci); - -/** - * platform_devices_init - sets up USB device resourse. - */ -int __init platform_usb_devices_init(struct platform_device **ehci_dev, - struct platform_device **ohci_dev) -{ - *ehci_dev = &ehci_device; - ehci_resources[0].start = asic_reg_phys_addr(ehci_hcapbase); - ehci_resources[0].end += ehci_resources[0].start; - - *ohci_dev = &ohci_device; - ohci_resources[0].start = asic_reg_phys_addr(ohci_hc_revision); - ohci_resources[0].end += ohci_resources[0].start; - - return 0; -} diff --git a/arch/mips/powertv/powertv_setup.c b/arch/mips/powertv/powertv_setup.c deleted file mode 100644 index 24689bff103..00000000000 --- a/arch/mips/powertv/powertv_setup.c +++ /dev/null @@ -1,319 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. - * Portions copyright (C) 2009 Cisco Systems, Inc. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - */ -#include <linux/init.h> -#include <linux/sched.h> -#include <linux/ioport.h> -#include <linux/pci.h> -#include <linux/screen_info.h> -#include <linux/notifier.h> -#include <linux/etherdevice.h> -#include <linux/if_ether.h> -#include <linux/ctype.h> -#include <linux/cpu.h> -#include <linux/time.h> - -#include <asm/bootinfo.h> -#include <asm/irq.h> -#include <asm/mips-boards/generic.h> -#include <asm/dma.h> -#include <asm/asm.h> -#include <asm/traps.h> -#include <asm/asm-offsets.h> -#include "reset.h" - -#define VAL(n) STR(n) - -/* - * Macros for loading addresses and storing registers: - * LONG_L_ Stringified version of LONG_L for use in asm() statement - * LONG_S_ Stringified version of LONG_S for use in asm() statement - * PTR_LA_ Stringified version of PTR_LA for use in asm() statement - * REG_SIZE Number of 8-bit bytes in a full width register - */ -#define LONG_L_ VAL(LONG_L) " " -#define LONG_S_ VAL(LONG_S) " " -#define PTR_LA_ VAL(PTR_LA) " " - -#ifdef CONFIG_64BIT -#warning TODO: 64-bit code needs to be verified -#define REG_SIZE "8" /* In bytes */ -#endif - -#ifdef CONFIG_32BIT -#define REG_SIZE "4" /* In bytes */ -#endif - -static void register_panic_notifier(void); -static int panic_handler(struct notifier_block *notifier_block, - unsigned long event, void *cause_string); - -const char *get_system_type(void) -{ - return "PowerTV"; -} - -void __init plat_mem_setup(void) -{ - panic_on_oops = 1; - register_panic_notifier(); - -#if 0 - mips_pcibios_init(); -#endif - mips_reboot_setup(); -} - -/* - * Install a panic notifier for platform-specific diagnostics - */ -static void register_panic_notifier() -{ - static struct notifier_block panic_notifier = { - .notifier_call = panic_handler, - .next = NULL, - .priority = INT_MAX - }; - atomic_notifier_chain_register(&panic_notifier_list, &panic_notifier); -} - -static int panic_handler(struct notifier_block *notifier_block, - unsigned long event, void *cause_string) -{ - struct pt_regs my_regs; - - /* Save all of the registers */ - { - unsigned long at, v0, v1; /* Must be on the stack */ - - /* Start by saving $at and v0 on the stack. We use $at - * ourselves, but it looks like the compiler may use v0 or v1 - * to load the address of the pt_regs structure. We'll come - * back later to store the registers in the pt_regs - * structure. */ - __asm__ __volatile__ ( - ".set noat\n" - LONG_S_ "$at, %[at]\n" - LONG_S_ "$2, %[v0]\n" - LONG_S_ "$3, %[v1]\n" - : - [at] "=m" (at), - [v0] "=m" (v0), - [v1] "=m" (v1) - : - : "at" - ); - - __asm__ __volatile__ ( - ".set noat\n" - "move $at, %[pt_regs]\n" - - /* Argument registers */ - LONG_S_ "$4, " VAL(PT_R4) "($at)\n" - LONG_S_ "$5, " VAL(PT_R5) "($at)\n" - LONG_S_ "$6, " VAL(PT_R6) "($at)\n" - LONG_S_ "$7, " VAL(PT_R7) "($at)\n" - - /* Temporary regs */ - LONG_S_ "$8, " VAL(PT_R8) "($at)\n" - LONG_S_ "$9, " VAL(PT_R9) "($at)\n" - LONG_S_ "$10, " VAL(PT_R10) "($at)\n" - LONG_S_ "$11, " VAL(PT_R11) "($at)\n" - LONG_S_ "$12, " VAL(PT_R12) "($at)\n" - LONG_S_ "$13, " VAL(PT_R13) "($at)\n" - LONG_S_ "$14, " VAL(PT_R14) "($at)\n" - LONG_S_ "$15, " VAL(PT_R15) "($at)\n" - - /* "Saved" registers */ - LONG_S_ "$16, " VAL(PT_R16) "($at)\n" - LONG_S_ "$17, " VAL(PT_R17) "($at)\n" - LONG_S_ "$18, " VAL(PT_R18) "($at)\n" - LONG_S_ "$19, " VAL(PT_R19) "($at)\n" - LONG_S_ "$20, " VAL(PT_R20) "($at)\n" - LONG_S_ "$21, " VAL(PT_R21) "($at)\n" - LONG_S_ "$22, " VAL(PT_R22) "($at)\n" - LONG_S_ "$23, " VAL(PT_R23) "($at)\n" - - /* Add'l temp regs */ - LONG_S_ "$24, " VAL(PT_R24) "($at)\n" - LONG_S_ "$25, " VAL(PT_R25) "($at)\n" - - /* Kernel temp regs */ - LONG_S_ "$26, " VAL(PT_R26) "($at)\n" - LONG_S_ "$27, " VAL(PT_R27) "($at)\n" - - /* Global pointer, stack pointer, frame pointer and - * return address */ - LONG_S_ "$gp, " VAL(PT_R28) "($at)\n" - LONG_S_ "$sp, " VAL(PT_R29) "($at)\n" - LONG_S_ "$fp, " VAL(PT_R30) "($at)\n" - LONG_S_ "$ra, " VAL(PT_R31) "($at)\n" - - /* Now we can get the $at and v0 registers back and - * store them */ - LONG_L_ "$8, %[at]\n" - LONG_S_ "$8, " VAL(PT_R1) "($at)\n" - LONG_L_ "$8, %[v0]\n" - LONG_S_ "$8, " VAL(PT_R2) "($at)\n" - LONG_L_ "$8, %[v1]\n" - LONG_S_ "$8, " VAL(PT_R3) "($at)\n" - : - : - [at] "m" (at), - [v0] "m" (v0), - [v1] "m" (v1), - [pt_regs] "r" (&my_regs) - : "at", "t0" - ); - - /* Set the current EPC value to be the current location in this - * function */ - __asm__ __volatile__ ( - ".set noat\n" - "1:\n" - PTR_LA_ "$at, 1b\n" - LONG_S_ "$at, %[cp0_epc]\n" - : - [cp0_epc] "=m" (my_regs.cp0_epc) - : - : "at" - ); - - my_regs.cp0_cause = read_c0_cause(); - my_regs.cp0_status = read_c0_status(); - } - - pr_crit("I'm feeling a bit sleepy. hmmmmm... perhaps a nap would... " - "zzzz... \n"); - - return NOTIFY_DONE; -} - -/* Information about the RF MAC address, if one was supplied on the - * command line. */ -static bool have_rfmac; -static u8 rfmac[ETH_ALEN]; - -static int rfmac_param(char *p) -{ - u8 *q; - bool is_high_nibble; - int c; - - /* Skip a leading "0x", if present */ - if (*p == '0' && *(p+1) == 'x') - p += 2; - - q = rfmac; - is_high_nibble = true; - - for (c = (unsigned char) *p++; - isxdigit(c) && q - rfmac < ETH_ALEN; - c = (unsigned char) *p++) { - int nibble; - - nibble = (isdigit(c) ? (c - '0') : - (isupper(c) ? c - 'A' + 10 : c - 'a' + 10)); - - if (is_high_nibble) - *q = nibble << 4; - else - *q++ |= nibble; - - is_high_nibble = !is_high_nibble; - } - - /* If we parsed all the way to the end of the parameter value and - * parsed all ETH_ALEN bytes, we have a usable RF MAC address */ - have_rfmac = (c == '\0' && q - rfmac == ETH_ALEN); - - return 0; -} - -early_param("rfmac", rfmac_param); - -/* - * Generate an Ethernet MAC address that has a good chance of being unique. - * @addr: Pointer to six-byte array containing the Ethernet address - * Generates an Ethernet MAC address that is highly likely to be unique for - * this particular system on a network with other systems of the same type. - * - * The problem we are solving is that, when eth_random_addr() is used to - * generate MAC addresses at startup, there isn't much entropy for the random - * number generator to use and the addresses it produces are fairly likely to - * be the same as those of other identical systems on the same local network. - * This is true even for relatively small numbers of systems (for the reason - * why, see the Wikipedia entry for "Birthday problem" at: - * http://en.wikipedia.org/wiki/Birthday_problem - * - * The good news is that we already have a MAC address known to be unique, the - * RF MAC address. The bad news is that this address is already in use on the - * RF interface. Worse, the obvious trick, taking the RF MAC address and - * turning on the locally managed bit, has already been used for other devices. - * Still, this does give us something to work with. - * - * The approach we take is: - * 1. If we can't get the RF MAC Address, just call eth_random_addr. - * 2. Use the 24-bit NIC-specific bits of the RF MAC address as the last 24 - * bits of the new address. This is very likely to be unique, except for - * the current box. - * 3. To avoid using addresses already on the current box, we set the top - * six bits of the address with a value different from any currently - * registered Scientific Atlanta organizationally unique identifyer - * (OUI). This avoids duplication with any addresses on the system that - * were generated from valid Scientific Atlanta-registered address by - * simply flipping the locally managed bit. - * 4. We aren't generating a multicast address, so we leave the multicast - * bit off. Since we aren't using a registered address, we have to set - * the locally managed bit. - * 5. We then randomly generate the remaining 16-bits. This does two - * things: - * a. It allows us to call this function for more than one device - * in this system - * b. It ensures that things will probably still work even if - * some device on the device network has a locally managed - * address that matches the top six bits from step 2. - */ -void platform_random_ether_addr(u8 addr[ETH_ALEN]) -{ - const int num_random_bytes = 2; - const unsigned char non_sciatl_oui_bits = 0xc0u; - const unsigned char mac_addr_locally_managed = (1 << 1); - - if (!have_rfmac) { - pr_warning("rfmac not available on command line; " - "generating random MAC address\n"); - eth_random_addr(addr); - } - - else { - int i; - - /* Set the first byte to something that won't match a Scientific - * Atlanta OUI, is locally managed, and isn't a multicast - * address */ - addr[0] = non_sciatl_oui_bits | mac_addr_locally_managed; - - /* Get some bytes of random address information */ - get_random_bytes(&addr[1], num_random_bytes); - - /* Copy over the NIC-specific bits of the RF MAC address */ - for (i = 1 + num_random_bytes; i < ETH_ALEN; i++) - addr[i] = rfmac[i]; - } -} diff --git a/arch/mips/powertv/reset.c b/arch/mips/powertv/reset.c deleted file mode 100644 index 11c32fbf278..00000000000 --- a/arch/mips/powertv/reset.c +++ /dev/null @@ -1,35 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. - * Portions copyright (C) 2009 Cisco Systems, Inc. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - */ -#include <linux/pm.h> - -#include <linux/io.h> -#include <asm/reboot.h> /* Not included by linux/reboot.h */ - -#include <asm/mach-powertv/asic_regs.h> -#include "reset.h" - -static void mips_machine_restart(char *command) -{ - writel(0x1, asic_reg_addr(watchdog)); -} - -void mips_reboot_setup(void) -{ - _machine_restart = mips_machine_restart; -} diff --git a/arch/mips/powertv/reset.h b/arch/mips/powertv/reset.h deleted file mode 100644 index 888fd09e262..00000000000 --- a/arch/mips/powertv/reset.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * Definitions from powertv reset.c file - * - * Copyright (C) 2009 Cisco Systems, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - * - * Author: David VomLehn - */ - -#ifndef _POWERTV_POWERTV_RESET_H -#define _POWERTV_POWERTV_RESET_H -extern void mips_reboot_setup(void); -#endif diff --git a/arch/mips/powertv/time.c b/arch/mips/powertv/time.c deleted file mode 100644 index f38b0d45eca..00000000000 --- a/arch/mips/powertv/time.c +++ /dev/null @@ -1,36 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. - * Portions copyright (C) 2009 Cisco Systems, Inc. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * Setting up the clock on the MIPS boards. - */ - -#include <linux/init.h> -#include <asm/mach-powertv/interrupts.h> -#include <asm/time.h> - -#include "powertv-clock.h" - -unsigned int get_c0_compare_int(void) -{ - return irq_mips_timer; -} - -void __init plat_time_init(void) -{ - powertv_clocksource_init(); -} diff --git a/arch/mips/ralink/clk.c b/arch/mips/ralink/clk.c index bba0cdfd83b..5d0983d4716 100644 --- a/arch/mips/ralink/clk.c +++ b/arch/mips/ralink/clk.c @@ -26,7 +26,7 @@ void ralink_clk_add(const char *dev, unsigned long rate) struct clk *clk = kzalloc(sizeof(struct clk), GFP_KERNEL); if (!clk) - panic("failed to add clock\n"); + panic("failed to add clock"); clk->cl.dev_id = dev; clk->cl.clk = clk; diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c index d217509e530..a3ad56c2372 100644 --- a/arch/mips/ralink/mt7620.c +++ b/arch/mips/ralink/mt7620.c @@ -350,7 +350,7 @@ void prom_soc_init(struct ralink_soc_info *soc_info) name = "MT7620A"; soc_info->compatible = "ralink,mt7620a-soc"; } else { - panic("mt7620: unknown SoC, n0:%08x n1:%08x\n", n0, n1); + panic("mt7620: unknown SoC, n0:%08x n1:%08x", n0, n1); } rev = __raw_readl(sysc + SYSC_REG_CHIP_REV); diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c index ce38d11f9da..15f21ea9612 100644 --- a/arch/mips/ralink/of.c +++ b/arch/mips/ralink/of.c @@ -108,7 +108,7 @@ static int __init plat_of_setup(void) strncpy(of_ids[1].compatible, "palmbus", len); if (of_platform_populate(NULL, of_ids, NULL, NULL)) - panic("failed to populate DT\n"); + panic("failed to populate DT"); /* make sure ithat the reset controller is setup early */ ralink_rst_init(); diff --git a/arch/mips/ralink/rt305x.c b/arch/mips/ralink/rt305x.c index ca7ee3a3379..bb82a82da9e 100644 --- a/arch/mips/ralink/rt305x.c +++ b/arch/mips/ralink/rt305x.c @@ -276,7 +276,7 @@ void prom_soc_init(struct ralink_soc_info *soc_info) name = "RT5350"; soc_info->compatible = "ralink,rt5350-soc"; } else { - panic("rt305x: unknown SoC, n0:%08x n1:%08x\n", n0, n1); + panic("rt305x: unknown SoC, n0:%08x n1:%08x", n0, n1); } id = __raw_readl(sysc + SYSC_REG_CHIP_ID); diff --git a/arch/mips/ralink/timer.c b/arch/mips/ralink/timer.c index e49241a2c39..20278570944 100644 --- a/arch/mips/ralink/timer.c +++ b/arch/mips/ralink/timer.c @@ -126,7 +126,7 @@ static int rt_timer_probe(struct platform_device *pdev) return -ENOENT; } - rt->membase = devm_request_and_ioremap(&pdev->dev, res); + rt->membase = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(rt->membase)) return PTR_ERR(rt->membase); diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig index ad2ce8dab99..7dcde539d61 100644 --- a/arch/parisc/Kconfig +++ b/arch/parisc/Kconfig @@ -287,6 +287,9 @@ config SYSVIPC_COMPAT def_bool y depends on COMPAT && SYSVIPC +config AUDIT_ARCH + def_bool y + config HPUX bool "Support for HP-UX binaries" depends on !64BIT diff --git a/arch/parisc/Makefile b/arch/parisc/Makefile index e02f665f804..7187664034c 100644 --- a/arch/parisc/Makefile +++ b/arch/parisc/Makefile @@ -94,7 +94,7 @@ PALOCONF := $(shell if [ -f $(src)/palo.conf ]; then echo $(src)/palo.conf; \ else echo $(obj)/palo.conf; \ fi) -palo: vmlinuz +palo lifimage: vmlinuz @if test ! -x "$(PALO)"; then \ echo 'ERROR: Please install palo first (apt-get install palo)';\ echo 'or build it from source and install it somewhere in your $$PATH';\ @@ -109,16 +109,23 @@ palo: vmlinuz fi $(PALO) -f $(PALOCONF) -# Shorthands for known targets not supported by parisc, use vmlinux/vmlinuz as default +BOOT_TARGETS = zImage Image palo lifimage +INSTALL_TARGETS = zinstall install + +PHONY += bzImage $(BOOT_TARGETS) $(INSTALL_TARGETS) + +bzImage zImage: vmlinuz Image: vmlinux -zImage bzImage: vmlinuz vmlinuz: vmlinux @gzip -cf -9 $< > $@ -install: vmlinuz - sh $(src)/arch/parisc/install.sh \ - $(KERNELRELEASE) $< System.map "$(INSTALL_PATH)" +install: + $(CONFIG_SHELL) $(src)/arch/parisc/install.sh \ + $(KERNELRELEASE) vmlinux System.map "$(INSTALL_PATH)" +zinstall: + $(CONFIG_SHELL) $(src)/arch/parisc/install.sh \ + $(KERNELRELEASE) vmlinuz System.map "$(INSTALL_PATH)" CLEAN_FILES += lifimage MRPROPER_FILES += palo.conf @@ -127,10 +134,11 @@ define archhelp @echo '* vmlinux - Uncompressed kernel image (./vmlinux)' @echo ' vmlinuz - Compressed kernel image (./vmlinuz)' @echo ' palo - Bootable image (./lifimage)' - @echo ' install - Install kernel using' + @echo ' install - Install uncompressed vmlinux kernel using' @echo ' (your) ~/bin/$(INSTALLKERNEL) or' @echo ' (distribution) /sbin/$(INSTALLKERNEL) or' @echo ' copy to $$(INSTALL_PATH)' + @echo ' zinstall - Install compressed vmlinuz kernel' endef # we require gcc 3.3 or above to compile the kernel diff --git a/arch/parisc/configs/712_defconfig b/arch/parisc/configs/712_defconfig index 0f90569b9d8..9387cc2693f 100644 --- a/arch/parisc/configs/712_defconfig +++ b/arch/parisc/configs/712_defconfig @@ -40,6 +40,8 @@ CONFIG_IP_NF_QUEUE=m CONFIG_LLC2=m CONFIG_NET_PKTGEN=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y # CONFIG_STANDALONE is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set CONFIG_PARPORT=y diff --git a/arch/parisc/configs/a500_defconfig b/arch/parisc/configs/a500_defconfig index b647b182dac..90025322b75 100644 --- a/arch/parisc/configs/a500_defconfig +++ b/arch/parisc/configs/a500_defconfig @@ -79,6 +79,8 @@ CONFIG_IP_DCCP=m CONFIG_LLC2=m CONFIG_NET_PKTGEN=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y # CONFIG_STANDALONE is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set CONFIG_BLK_DEV_UMEM=m diff --git a/arch/parisc/configs/b180_defconfig b/arch/parisc/configs/b180_defconfig index e289f5bf314..f1a0c25bef8 100644 --- a/arch/parisc/configs/b180_defconfig +++ b/arch/parisc/configs/b180_defconfig @@ -4,6 +4,7 @@ CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=16 CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_BLK_DEV_INITRD=y CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODVERSIONS=y @@ -27,6 +28,8 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_LRO is not set CONFIG_IPV6=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y # CONFIG_PREVENT_FIRMWARE_BUILD is not set CONFIG_PARPORT=y CONFIG_PARPORT_PC=y diff --git a/arch/parisc/configs/c3000_defconfig b/arch/parisc/configs/c3000_defconfig index 311ca367b62..ec1b014952b 100644 --- a/arch/parisc/configs/c3000_defconfig +++ b/arch/parisc/configs/c3000_defconfig @@ -5,6 +5,7 @@ CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=16 CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_BLK_DEV_INITRD=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EXPERT=y CONFIG_KALLSYMS_ALL=y @@ -39,6 +40,8 @@ CONFIG_NETFILTER_DEBUG=y CONFIG_IP_NF_QUEUE=m CONFIG_NET_PKTGEN=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y # CONFIG_STANDALONE is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set CONFIG_BLK_DEV_UMEM=m diff --git a/arch/parisc/configs/c8000_defconfig b/arch/parisc/configs/c8000_defconfig index f1100636129..e1c8d2015c8 100644 --- a/arch/parisc/configs/c8000_defconfig +++ b/arch/parisc/configs/c8000_defconfig @@ -62,6 +62,8 @@ CONFIG_TIPC=m CONFIG_LLC2=m CONFIG_DNS_RESOLVER=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y # CONFIG_STANDALONE is not set CONFIG_PARPORT=y CONFIG_PARPORT_PC=y diff --git a/arch/parisc/configs/default_defconfig b/arch/parisc/configs/default_defconfig index dfe88f6c95c..ba61495e1fa 100644 --- a/arch/parisc/configs/default_defconfig +++ b/arch/parisc/configs/default_defconfig @@ -49,6 +49,8 @@ CONFIG_INET6_ESP=y CONFIG_INET6_IPCOMP=y CONFIG_LLC2=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y # CONFIG_STANDALONE is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set CONFIG_PARPORT=y diff --git a/arch/parisc/configs/generic-32bit_defconfig b/arch/parisc/configs/generic-32bit_defconfig new file mode 100644 index 00000000000..33b148f825b --- /dev/null +++ b/arch/parisc/configs/generic-32bit_defconfig @@ -0,0 +1,328 @@ +CONFIG_LOCALVERSION="-32bit" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=16 +CONFIG_BLK_DEV_INITRD=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_RD_LZO=y +CONFIG_EXPERT=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_PERF_EVENTS=y +CONFIG_SLAB=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_LBDAF is not set +# CONFIG_BLK_DEV_BSG is not set +CONFIG_PA7100LC=y +CONFIG_SMP=y +CONFIG_HZ_100=y +CONFIG_IOMMU_CCIO=y +CONFIG_GSC_LASI=y +CONFIG_GSC_WAX=y +CONFIG_EISA=y +CONFIG_PCI=y +CONFIG_GSC_DINO=y +CONFIG_PCI_LBA=y +CONFIG_PCCARD=m +CONFIG_YENTA=m +# CONFIG_PDC_CHASSIS is not set +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_BINFMT_MISC=m +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_XFRM_USER=m +CONFIG_NET_KEY=m +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=m +CONFIG_LLC2=m +# CONFIG_WIRELESS is not set +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_PARPORT=y +CONFIG_PARPORT_PC=m +CONFIG_PARPORT_1284=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=6144 +CONFIG_IDE=y +CONFIG_BLK_DEV_IDECD=y +CONFIG_BLK_DEV_GENERIC=y +CONFIG_BLK_DEV_NS87415=y +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=y +CONFIG_BLK_DEV_SR=y +CONFIG_CHR_DEV_SG=y +CONFIG_SCSI_LASI700=y +CONFIG_SCSI_SYM53C8XX_2=y +CONFIG_SCSI_ZALON=y +CONFIG_SCSI_DH=y +CONFIG_ATA=y +CONFIG_MD=y +CONFIG_BLK_DEV_MD=m +CONFIG_MD_LINEAR=m +CONFIG_MD_RAID0=m +CONFIG_MD_RAID1=m +CONFIG_MD_RAID10=m +CONFIG_MD_RAID456=m +CONFIG_BLK_DEV_DM=y +CONFIG_DM_UEVENT=y +CONFIG_NETDEVICES=y +CONFIG_BONDING=m +CONFIG_DUMMY=m +CONFIG_TUN=m +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_NET_VENDOR_ADAPTEC is not set +# CONFIG_NET_VENDOR_ALTEON is not set +# CONFIG_NET_VENDOR_AMD is not set +# CONFIG_NET_VENDOR_ATHEROS is not set +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_BROCADE is not set +# CONFIG_NET_VENDOR_CHELSIO is not set +# CONFIG_NET_VENDOR_CISCO is not set +CONFIG_NET_TULIP=y +CONFIG_TULIP=y +# CONFIG_NET_VENDOR_DLINK is not set +# CONFIG_NET_VENDOR_EMULEX is not set +# CONFIG_NET_VENDOR_EXAR is not set +# CONFIG_NET_VENDOR_HP is not set +CONFIG_LASI_82596=y +# CONFIG_NET_VENDOR_MELLANOX is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_MYRI is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_NVIDIA is not set +# CONFIG_NET_VENDOR_OKI is not set +# CONFIG_NET_PACKET_ENGINE is not set +# CONFIG_NET_VENDOR_QLOGIC is not set +# CONFIG_NET_VENDOR_REALTEK is not set +# CONFIG_NET_VENDOR_RDC is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_SILAN is not set +# CONFIG_NET_VENDOR_SIS is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_SUN is not set +# CONFIG_NET_VENDOR_TEHUTI is not set +# CONFIG_NET_VENDOR_TI is not set +# CONFIG_NET_VENDOR_VIA is not set +CONFIG_PPP=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPPOE=m +# CONFIG_WLAN is not set +CONFIG_INPUT_POLLDEV=y +CONFIG_KEYBOARD_HIL_OLD=m +CONFIG_KEYBOARD_HIL=m +CONFIG_MOUSE_SERIAL=y +CONFIG_INPUT_MISC=y +CONFIG_INPUT_UINPUT=m +CONFIG_LEGACY_PTY_COUNT=64 +CONFIG_SERIAL_8250=y +# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=8 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_PRINTER=m +CONFIG_PPDEV=m +# CONFIG_HW_RANDOM is not set +CONFIG_I2C=y +CONFIG_POWER_SUPPLY=y +# CONFIG_HWMON is not set +CONFIG_AGP=y +CONFIG_VIDEO_OUTPUT_CONTROL=y +CONFIG_FB=y +CONFIG_FB_FOREIGN_ENDIAN=y +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_MATROX=m +CONFIG_FB_MATROX_G=y +CONFIG_FB_VOODOO1=m +CONFIG_DUMMY_CONSOLE_COLUMNS=128 +CONFIG_DUMMY_CONSOLE_ROWS=48 +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +# CONFIG_LOGO_LINUX_CLUT224 is not set +CONFIG_SOUND=m +CONFIG_SND=m +CONFIG_SND_SEQUENCER=m +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_SEQUENCER_OSS=y +CONFIG_SND_DYNAMIC_MINORS=y +CONFIG_SND_AD1889=m +CONFIG_SND_HARMONY=m +CONFIG_HIDRAW=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DRAGONRISE=y +CONFIG_HID_EZKEY=y +CONFIG_HID_KYE=y +CONFIG_HID_GYRATION=y +CONFIG_HID_TWINHAN=y +CONFIG_HID_KENSINGTON=y +CONFIG_HID_LOGITECH=y +CONFIG_HID_LOGITECH_DJ=m +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_NTRIG=y +CONFIG_HID_ORTEK=y +CONFIG_HID_PANTHERLORD=y +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +CONFIG_HID_GREENASIA=y +CONFIG_HID_SMARTJOYPLUS=y +CONFIG_HID_TOPSEED=y +CONFIG_HID_THRUSTMASTER=y +CONFIG_HID_ZEROPLUS=y +CONFIG_USB=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y +CONFIG_USB_MON=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_UHCI_HCD=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_IDE_DISK=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y +CONFIG_DMADEVICES=y +CONFIG_AUXDISPLAY=y +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_SECURITY=y +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT3_FS_SECURITY=y +CONFIG_EXT4_FS=y +CONFIG_XFS_FS=m +CONFIG_XFS_QUOTA=y +CONFIG_XFS_RT=y +CONFIG_QUOTA=y +CONFIG_QUOTA_NETLINK_INTERFACE=y +CONFIG_QFMT_V2=y +CONFIG_AUTOFS4_FS=y +CONFIG_ISO9660_FS=y +CONFIG_JOLIET=y +CONFIG_VFAT_FS=y +CONFIG_PROC_KCORE=y +CONFIG_TMPFS=y +CONFIG_TMPFS_XATTR=y +CONFIG_NFS_FS=m +# CONFIG_NFS_V2 is not set +CONFIG_NFSD=m +CONFIG_NFSD_V3=y +CONFIG_CIFS=m +CONFIG_CIFS_WEAK_PW_HASH=y +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +# CONFIG_CIFS_DEBUG is not set +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=y +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=y +CONFIG_UNUSED_SYMBOLS=y +CONFIG_DEBUG_FS=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_MEMORY_INIT=y +CONFIG_DEBUG_STACKOVERFLOW=y +CONFIG_DEBUG_SHIRQ=y +CONFIG_DETECT_HUNG_TASK=y +CONFIG_TIMER_STATS=y +CONFIG_DEBUG_RT_MUTEXES=y +CONFIG_RT_MUTEX_TESTER=y +CONFIG_DEBUG_SPINLOCK=y +CONFIG_DEBUG_MUTEXES=y +CONFIG_RCU_CPU_STALL_INFO=y +CONFIG_LATENCYTOP=y +CONFIG_LKDTM=m +CONFIG_KEYS=y +CONFIG_KEYS_DEBUG_PROC_KEYS=y +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_TEST=m +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_SHA1=y +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_DEFLATE=y +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRC_CCITT=m +CONFIG_CRC_T10DIF=y +CONFIG_FONTS=y diff --git a/arch/parisc/configs/generic-64bit_defconfig b/arch/parisc/configs/generic-64bit_defconfig new file mode 100644 index 00000000000..5874cebee07 --- /dev/null +++ b/arch/parisc/configs/generic-64bit_defconfig @@ -0,0 +1,346 @@ +CONFIG_LOCALVERSION="-64bit" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_TASKSTATS=y +CONFIG_TASK_DELAY_ACCT=y +CONFIG_TASK_XACCT=y +CONFIG_TASK_IO_ACCOUNTING=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set +CONFIG_RELAY=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +# CONFIG_COMPAT_BRK is not set +CONFIG_MODULES=y +CONFIG_MODULE_FORCE_LOAD=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_BLK_DEV_INTEGRITY=y +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_PA8X00=y +CONFIG_MLONGCALLS=y +CONFIG_64BIT=y +CONFIG_SMP=y +# CONFIG_COMPACTION is not set +CONFIG_HPPB=y +CONFIG_IOMMU_CCIO=y +CONFIG_GSC_LASI=y +CONFIG_GSC_WAX=y +CONFIG_PCI=y +CONFIG_PCI_STUB=m +CONFIG_PCI_IOV=y +CONFIG_GSC_DINO=y +CONFIG_PCI_LBA=y +CONFIG_BINFMT_MISC=m +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_XFRM_USER=m +CONFIG_XFRM_SUB_POLICY=y +CONFIG_XFRM_MIGRATE=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_XFRM_MODE_TRANSPORT=m +CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m +CONFIG_INET_LRO=m +CONFIG_INET_DIAG=m +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_ADVANCED is not set +CONFIG_NETFILTER_NETLINK_LOG=y +CONFIG_DCB=y +# CONFIG_WIRELESS is not set +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_IDE=y +CONFIG_IDE_GD=m +CONFIG_IDE_GD_ATAPI=y +CONFIG_BLK_DEV_IDECD=m +CONFIG_BLK_DEV_NS87415=y +CONFIG_BLK_DEV_SIIMAGE=y +# CONFIG_SCSI_PROC_FS is not set +CONFIG_BLK_DEV_SD=y +CONFIG_BLK_DEV_SR=y +CONFIG_SCSI_ISCSI_ATTRS=y +CONFIG_SCSI_SRP_ATTRS=y +CONFIG_ISCSI_BOOT_SYSFS=y +CONFIG_SCSI_MPT2SAS=y +CONFIG_SCSI_LASI700=m +CONFIG_SCSI_SYM53C8XX_2=y +CONFIG_SCSI_ZALON=y +CONFIG_SCSI_QLA_ISCSI=m +CONFIG_SCSI_DH=y +CONFIG_ATA=y +CONFIG_ATA_GENERIC=y +CONFIG_MD=y +CONFIG_MD_LINEAR=m +CONFIG_MD_RAID0=m +CONFIG_BLK_DEV_DM=m +CONFIG_DM_RAID=m +CONFIG_DM_UEVENT=y +CONFIG_FUSION=y +CONFIG_FUSION_SPI=y +CONFIG_FUSION_SAS=y +CONFIG_NETDEVICES=y +CONFIG_DUMMY=m +CONFIG_MACVLAN=m +CONFIG_MACVTAP=m +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y +CONFIG_TUN=y +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_NET_VENDOR_ADAPTEC is not set +# CONFIG_NET_VENDOR_ALTEON is not set +# CONFIG_NET_VENDOR_AMD is not set +# CONFIG_NET_VENDOR_ATHEROS is not set +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_BROCADE is not set +# CONFIG_NET_VENDOR_CHELSIO is not set +# CONFIG_NET_VENDOR_CISCO is not set +CONFIG_NET_TULIP=y +CONFIG_TULIP=y +# CONFIG_NET_VENDOR_DLINK is not set +# CONFIG_NET_VENDOR_EMULEX is not set +# CONFIG_NET_VENDOR_EXAR is not set +CONFIG_HP100=m +CONFIG_E1000=y +CONFIG_LASI_82596=y +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MELLANOX is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_MYRI is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_NVIDIA is not set +# CONFIG_NET_VENDOR_OKI is not set +CONFIG_QLA3XXX=m +CONFIG_QLCNIC=m +CONFIG_QLGE=m +# CONFIG_NET_VENDOR_REALTEK is not set +# CONFIG_NET_VENDOR_RDC is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_SILAN is not set +# CONFIG_NET_VENDOR_SIS is not set +# CONFIG_NET_VENDOR_SMSC is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_SUN is not set +# CONFIG_NET_VENDOR_TEHUTI is not set +# CONFIG_NET_VENDOR_TI is not set +# CONFIG_NET_VENDOR_VIA is not set +# CONFIG_NET_VENDOR_WIZNET is not set +CONFIG_PHYLIB=y +CONFIG_MARVELL_PHY=m +CONFIG_DAVICOM_PHY=m +CONFIG_QSEMI_PHY=m +CONFIG_LXT_PHY=m +CONFIG_CICADA_PHY=m +CONFIG_VITESSE_PHY=m +CONFIG_SMSC_PHY=m +CONFIG_BROADCOM_PHY=m +CONFIG_ICPLUS_PHY=m +CONFIG_REALTEK_PHY=m +CONFIG_NATIONAL_PHY=m +CONFIG_STE10XP=m +CONFIG_LSI_ET1011C_PHY=m +CONFIG_MDIO_BITBANG=m +CONFIG_SLIP=m +CONFIG_SLIP_COMPRESSED=y +CONFIG_SLIP_SMART=y +CONFIG_SLIP_MODE_SLIP6=y +# CONFIG_WLAN is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_KEYBOARD_HIL_OLD is not set +# CONFIG_KEYBOARD_HIL is not set +# CONFIG_INPUT_MOUSE is not set +CONFIG_INPUT_MISC=y +CONFIG_SERIO_SERPORT=m +# CONFIG_HP_SDC is not set +CONFIG_SERIO_RAW=m +CONFIG_DEVPTS_MULTIPLE_INSTANCES=y +# CONFIG_LEGACY_PTYS is not set +CONFIG_NOZOMI=m +# CONFIG_DEVKMEM is not set +CONFIG_SERIAL_8250=y +# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=8 +CONFIG_SERIAL_8250_RUNTIME_UARTS=8 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_JSM=m +CONFIG_IPMI_HANDLER=y +CONFIG_IPMI_DEVICE_INTERFACE=y +CONFIG_IPMI_SI=y +# CONFIG_HW_RANDOM is not set +CONFIG_TCG_TPM=m +CONFIG_TCG_ATMEL=m +CONFIG_PTP_1588_CLOCK=m +CONFIG_SENSORS_I5K_AMB=m +CONFIG_SENSORS_F71882FG=m +CONFIG_SENSORS_PC87427=m +CONFIG_SENSORS_VT1211=m +CONFIG_SENSORS_VT8231=m +CONFIG_SENSORS_W83627EHF=m +CONFIG_WATCHDOG=y +CONFIG_SOFT_WATCHDOG=m +CONFIG_SSB=m +CONFIG_SSB_DRIVER_PCICORE=y +CONFIG_HTC_PASIC3=m +CONFIG_LPC_SCH=m +CONFIG_MFD_SM501=m +CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=m +CONFIG_REGULATOR_USERSPACE_CONSUMER=m +CONFIG_MEDIA_SUPPORT=m +CONFIG_AGP=y +CONFIG_AGP_PARISC=y +CONFIG_DRM=y +CONFIG_DRM_RADEON=y +CONFIG_DRM_RADEON_UMS=y +CONFIG_FIRMWARE_EDID=y +CONFIG_FB_MODE_HELPERS=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_BACKLIGHT_GENERIC is not set +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +CONFIG_HID=m +CONFIG_HIDRAW=y +CONFIG_HID_DRAGONRISE=m +CONFIG_DRAGONRISE_FF=y +CONFIG_HID_KYE=m +CONFIG_HID_GYRATION=m +CONFIG_HID_TWINHAN=m +CONFIG_LOGITECH_FF=y +CONFIG_LOGIRUMBLEPAD2_FF=y +CONFIG_HID_NTRIG=m +CONFIG_HID_PANTHERLORD=m +CONFIG_PANTHERLORD_FF=y +CONFIG_HID_PETALYNX=m +CONFIG_HID_SAMSUNG=m +CONFIG_HID_SONY=m +CONFIG_HID_SUNPLUS=m +CONFIG_HID_GREENASIA=m +CONFIG_GREENASIA_FF=y +CONFIG_HID_SMARTJOYPLUS=m +CONFIG_SMARTJOYPLUS_FF=y +CONFIG_HID_TOPSEED=m +CONFIG_HID_THRUSTMASTER=m +CONFIG_THRUSTMASTER_FF=y +CONFIG_HID_ZEROPLUS=m +CONFIG_ZEROPLUS_FF=y +CONFIG_USB_HID=m +CONFIG_HID_PID=y +CONFIG_USB_HIDDEV=y +CONFIG_USB=y +CONFIG_USB_DEBUG=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y +CONFIG_USB_DYNAMIC_MINORS=y +CONFIG_USB_MON=m +CONFIG_USB_WUSB_CBAF=m +CONFIG_USB_XHCI_HCD=m +CONFIG_USB_EHCI_HCD=m +CONFIG_USB_OHCI_HCD=m +CONFIG_USB_R8A66597_HCD=m +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m +CONFIG_USB_WDM=m +CONFIG_USB_TMC=m +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_ONESHOT=y +CONFIG_LEDS_TRIGGER_IDE_DISK=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=m +CONFIG_LEDS_TRIGGER_BACKLIGHT=m +CONFIG_LEDS_TRIGGER_DEFAULT_ON=m +CONFIG_UIO=y +CONFIG_UIO_PDRV_GENIRQ=m +CONFIG_UIO_AEC=m +CONFIG_UIO_SERCOS3=m +CONFIG_UIO_PCI_GENERIC=m +CONFIG_STAGING=y +# CONFIG_NET_VENDOR_SILICOM is not set +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_SECURITY=y +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_SECURITY=y +CONFIG_EXT4_FS=y +CONFIG_EXT4_FS_SECURITY=y +CONFIG_XFS_FS=m +CONFIG_BTRFS_FS=m +CONFIG_QUOTA=y +CONFIG_QUOTA_NETLINK_INTERFACE=y +CONFIG_QFMT_V2=y +CONFIG_AUTOFS4_FS=y +CONFIG_FUSE_FS=y +CONFIG_CUSE=y +CONFIG_ISO9660_FS=y +CONFIG_UDF_FS=y +CONFIG_VFAT_FS=m +CONFIG_PROC_KCORE=y +CONFIG_TMPFS=y +CONFIG_TMPFS_XATTR=y +CONFIG_CONFIGFS_FS=y +CONFIG_SYSV_FS=y +CONFIG_NFS_FS=m +CONFIG_NFS_V4=m +CONFIG_NFS_V4_1=y +CONFIG_NFSD=m +CONFIG_NFSD_V4=y +CONFIG_NLS_DEFAULT="utf8" +CONFIG_NLS_CODEPAGE_437=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_UTF8=m +CONFIG_PRINTK_TIME=y +CONFIG_STRIP_ASM_SYMS=y +CONFIG_UNUSED_SYMBOLS=y +CONFIG_DEBUG_FS=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y +CONFIG_DEBUG_STACKOVERFLOW=y +CONFIG_LOCKUP_DETECTOR=y +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y +CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y +# CONFIG_SCHED_DEBUG is not set +CONFIG_TIMER_STATS=y +CONFIG_DEBUG_STRICT_USER_COPY_CHECKS=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_FCRYPT=m +CONFIG_CRYPTO_DEFLATE=m +# CONFIG_CRYPTO_HW is not set +CONFIG_CRC_CCITT=m +CONFIG_LIBCRC32C=y +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_SPARC=y diff --git a/arch/parisc/include/asm/assembly.h b/arch/parisc/include/asm/assembly.h index 0da84823234..b3069fd8346 100644 --- a/arch/parisc/include/asm/assembly.h +++ b/arch/parisc/include/asm/assembly.h @@ -515,5 +515,17 @@ nop /* 7 */ .endm + /* + * ASM_EXCEPTIONTABLE_ENTRY + * + * Creates an exception table entry. + * Do not convert to a assembler macro. This won't work. + */ +#define ASM_EXCEPTIONTABLE_ENTRY(fault_addr, except_addr) \ + .section __ex_table,"aw" ! \ + ASM_ULONG_INSN fault_addr, except_addr ! \ + .previous + + #endif /* __ASSEMBLY__ */ #endif diff --git a/arch/parisc/include/asm/delay.h b/arch/parisc/include/asm/delay.h index 912ee7e6a57..08e58e679e3 100644 --- a/arch/parisc/include/asm/delay.h +++ b/arch/parisc/include/asm/delay.h @@ -1,15 +1,5 @@ -#ifndef _PARISC_DELAY_H -#define _PARISC_DELAY_H - -#include <asm/special_insns.h> /* for mfctl() */ -#include <asm/processor.h> /* for boot_cpu_data */ - - -/* - * Copyright (C) 1993 Linus Torvalds - * - * Delay routines - */ +#ifndef _ASM_PARISC_DELAY_H +#define _ASM_PARISC_DELAY_H static __inline__ void __delay(unsigned long loops) { asm volatile( @@ -19,25 +9,14 @@ static __inline__ void __delay(unsigned long loops) { : "=r" (loops) : "0" (loops)); } -static __inline__ void __cr16_delay(unsigned long clocks) { - unsigned long start; - - /* - * Note: Due to unsigned math, cr16 rollovers shouldn't be - * a problem here. However, on 32 bit, we need to make sure - * we don't pass in too big a value. The current default - * value of MAX_UDELAY_MS should help prevent this. - */ +extern void __udelay(unsigned long usecs); +extern void __udelay_bad(unsigned long usecs); - start = mfctl(16); - while ((mfctl(16) - start) < clocks) - ; +static inline void udelay(unsigned long usecs) +{ + if (__builtin_constant_p(usecs) && (usecs) > 20000) + __udelay_bad(usecs); + __udelay(usecs); } -static __inline__ void __udelay(unsigned long usecs) { - __cr16_delay(usecs * ((unsigned long)boot_cpu_data.cpu_hz / 1000000UL)); -} - -#define udelay(n) __udelay(n) - -#endif /* defined(_PARISC_DELAY_H) */ +#endif /* _ASM_PARISC_DELAY_H */ diff --git a/arch/parisc/include/asm/hardirq.h b/arch/parisc/include/asm/hardirq.h index 241c3451846..9b3bd039a60 100644 --- a/arch/parisc/include/asm/hardirq.h +++ b/arch/parisc/include/asm/hardirq.h @@ -21,7 +21,6 @@ typedef struct { unsigned int irq_stack_usage; #ifdef CONFIG_SMP unsigned int irq_resched_count; - unsigned int irq_call_count; #endif unsigned int irq_unaligned_count; unsigned int irq_fpassist_count; diff --git a/arch/parisc/include/asm/ptrace.h b/arch/parisc/include/asm/ptrace.h index a2db278a5de..3c3cb004b7e 100644 --- a/arch/parisc/include/asm/ptrace.h +++ b/arch/parisc/include/asm/ptrace.h @@ -19,5 +19,9 @@ #define user_stack_pointer(regs) ((regs)->gr[30]) unsigned long profile_pc(struct pt_regs *); +static inline unsigned long regs_return_value(struct pt_regs *regs) +{ + return regs->gr[20]; +} #endif diff --git a/arch/parisc/include/asm/thread_info.h b/arch/parisc/include/asm/thread_info.h index 540c88fa8f8..bc7cf120106 100644 --- a/arch/parisc/include/asm/thread_info.h +++ b/arch/parisc/include/asm/thread_info.h @@ -59,6 +59,7 @@ struct thread_info { #define TIF_32BIT 4 /* 32 bit binary */ #define TIF_MEMDIE 5 /* is terminating due to OOM killer */ #define TIF_RESTORE_SIGMASK 6 /* restore saved signal mask */ +#define TIF_SYSCALL_AUDIT 7 /* syscall auditing active */ #define TIF_NOTIFY_RESUME 8 /* callback before returning to user */ #define TIF_SINGLESTEP 9 /* single stepping? */ #define TIF_BLOCKSTEP 10 /* branch stepping? */ @@ -68,6 +69,7 @@ struct thread_info { #define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED) #define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG) #define _TIF_32BIT (1 << TIF_32BIT) +#define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT) #define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME) #define _TIF_SINGLESTEP (1 << TIF_SINGLESTEP) #define _TIF_BLOCKSTEP (1 << TIF_BLOCKSTEP) @@ -75,7 +77,7 @@ struct thread_info { #define _TIF_USER_WORK_MASK (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | \ _TIF_NEED_RESCHED) #define _TIF_SYSCALL_TRACE_MASK (_TIF_SYSCALL_TRACE | _TIF_SINGLESTEP | \ - _TIF_BLOCKSTEP) + _TIF_BLOCKSTEP | _TIF_SYSCALL_AUDIT) #endif /* __KERNEL__ */ diff --git a/arch/parisc/include/asm/uaccess.h b/arch/parisc/include/asm/uaccess.h index e0a82358517..63f4dd0b49c 100644 --- a/arch/parisc/include/asm/uaccess.h +++ b/arch/parisc/include/asm/uaccess.h @@ -4,11 +4,14 @@ /* * User space memory access functions */ +#include <asm/processor.h> #include <asm/page.h> #include <asm/cache.h> #include <asm/errno.h> #include <asm-generic/uaccess-unaligned.h> +#include <linux/sched.h> + #define VERIFY_READ 0 #define VERIFY_WRITE 1 @@ -33,12 +36,43 @@ extern int __get_user_bad(void); extern int __put_kernel_bad(void); extern int __put_user_bad(void); -static inline long access_ok(int type, const void __user * addr, - unsigned long size) + +/* + * Test whether a block of memory is a valid user space address. + * Returns 0 if the range is valid, nonzero otherwise. + */ +static inline int __range_not_ok(unsigned long addr, unsigned long size, + unsigned long limit) { - return 1; + unsigned long __newaddr = addr + size; + return (__newaddr < addr || __newaddr > limit || size > limit); } +/** + * access_ok: - Checks if a user space pointer is valid + * @type: Type of access: %VERIFY_READ or %VERIFY_WRITE. Note that + * %VERIFY_WRITE is a superset of %VERIFY_READ - if it is safe + * to write to a block, it is always safe to read from it. + * @addr: User space pointer to start of block to check + * @size: Size of block to check + * + * Context: User context only. This function may sleep. + * + * Checks if a pointer to a block of memory in user space is valid. + * + * Returns true (nonzero) if the memory block may be valid, false (zero) + * if it is definitely invalid. + * + * Note that, depending on architecture, this function probably just + * checks that the pointer is in the user space range - after calling + * this function, memory access functions may still return -EFAULT. + */ +#define access_ok(type, addr, size) \ +( __chk_user_ptr(addr), \ + !__range_not_ok((unsigned long) (__force void *) (addr), \ + size, user_addr_max()) \ +) + #define put_user __put_user #define get_user __get_user @@ -59,12 +93,13 @@ static inline long access_ok(int type, const void __user * addr, /* * The exception table contains two values: the first is an address * for an instruction that is allowed to fault, and the second is - * the address to the fixup routine. + * the address to the fixup routine. Even on a 64bit kernel we could + * use a 32bit (unsigned int) address here. */ struct exception_table_entry { - unsigned long insn; /* address of insn that is allowed to fault. */ - long fixup; /* fixup routine */ + unsigned long insn; /* address of insn that is allowed to fault. */ + unsigned long fixup; /* fixup routine */ }; #define ASM_EXCEPTIONTABLE_ENTRY( fault_addr, except_addr )\ @@ -218,7 +253,11 @@ extern long lstrnlen_user(const char __user *,long); /* * Complex access routines -- macros */ -#define user_addr_max() (~0UL) +#ifdef CONFIG_COMPAT +#define user_addr_max() (TASK_SIZE) +#else +#define user_addr_max() (DEFAULT_TASK_SIZE) +#endif #define strnlen_user lstrnlen_user #define strlen_user(str) lstrnlen_user(str, 0x7fffffffL) diff --git a/arch/parisc/install.sh b/arch/parisc/install.sh index 4da682b466d..6f68784fea2 100644 --- a/arch/parisc/install.sh +++ b/arch/parisc/install.sh @@ -19,20 +19,48 @@ # $4 - default install path (blank if root directory) # +verify () { + if [ ! -f "$1" ]; then + echo "" 1>&2 + echo " *** Missing file: $1" 1>&2 + echo ' *** You need to run "make" before "make install".' 1>&2 + echo "" 1>&2 + exit 1 + fi +} + +# Make sure the files actually exist + +verify "$2" +verify "$3" + # User may have a custom install script -if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi -if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi +if [ -n "${INSTALLKERNEL}" ]; then + if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi + if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi +fi # Default install -if [ -f $4/vmlinuz ]; then - mv $4/vmlinuz $4/vmlinuz.old +if [ "$(basename $2)" = "zImage" ]; then +# Compressed install + echo "Installing compressed kernel" + base=vmlinuz +else +# Normal install + echo "Installing normal kernel" + base=vmlinux +fi + +if [ -f $4/$base-$1 ]; then + mv $4/$base-$1 $4/$base-$1.old fi +cat $2 > $4/$base-$1 -if [ -f $4/System.map ]; then - mv $4/System.map $4/System.old +# Install system map file +if [ -f $4/System.map-$1 ]; then + mv $4/System.map-$1 $4/System.map-$1.old fi +cp $3 $4/System.map-$1 -cat $2 > $4/vmlinuz -cp $3 $4/System.map diff --git a/arch/parisc/kernel/Makefile b/arch/parisc/kernel/Makefile index 66ee3f12df5..ff87b4603e3 100644 --- a/arch/parisc/kernel/Makefile +++ b/arch/parisc/kernel/Makefile @@ -29,7 +29,9 @@ obj-$(CONFIG_PCI) += pci.o obj-$(CONFIG_MODULES) += module.o obj-$(CONFIG_64BIT) += binfmt_elf32.o sys_parisc32.o signal32.o obj-$(CONFIG_STACKTRACE)+= stacktrace.o +obj-$(CONFIG_AUDIT) += audit.o +obj64-$(CONFIG_AUDIT) += compat_audit.o # only supported for PCX-W/U in 64-bit mode at the moment -obj-$(CONFIG_64BIT) += perf.o perf_asm.o +obj-$(CONFIG_64BIT) += perf.o perf_asm.o $(obj64-y) obj-$(CONFIG_FUNCTION_TRACER) += ftrace.o obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o diff --git a/arch/parisc/kernel/audit.c b/arch/parisc/kernel/audit.c new file mode 100644 index 00000000000..eb64a6148c8 --- /dev/null +++ b/arch/parisc/kernel/audit.c @@ -0,0 +1,81 @@ +#include <linux/init.h> +#include <linux/types.h> +#include <linux/audit.h> +#include <asm/unistd.h> + +static unsigned dir_class[] = { +#include <asm-generic/audit_dir_write.h> +~0U +}; + +static unsigned read_class[] = { +#include <asm-generic/audit_read.h> +~0U +}; + +static unsigned write_class[] = { +#include <asm-generic/audit_write.h> +~0U +}; + +static unsigned chattr_class[] = { +#include <asm-generic/audit_change_attr.h> +~0U +}; + +static unsigned signal_class[] = { +#include <asm-generic/audit_signal.h> +~0U +}; + +int audit_classify_arch(int arch) +{ +#ifdef CONFIG_COMPAT + if (arch == AUDIT_ARCH_PARISC) + return 1; +#endif + return 0; +} + +int audit_classify_syscall(int abi, unsigned syscall) +{ +#ifdef CONFIG_COMPAT + extern int parisc32_classify_syscall(unsigned); + if (abi == AUDIT_ARCH_PARISC) + return parisc32_classify_syscall(syscall); +#endif + switch (syscall) { + case __NR_open: + return 2; + case __NR_openat: + return 3; + case __NR_execve: + return 5; + default: + return 0; + } +} + +static int __init audit_classes_init(void) +{ +#ifdef CONFIG_COMPAT + extern __u32 parisc32_dir_class[]; + extern __u32 parisc32_write_class[]; + extern __u32 parisc32_read_class[]; + extern __u32 parisc32_chattr_class[]; + extern __u32 parisc32_signal_class[]; + audit_register_class(AUDIT_CLASS_WRITE_32, parisc32_write_class); + audit_register_class(AUDIT_CLASS_READ_32, parisc32_read_class); + audit_register_class(AUDIT_CLASS_DIR_WRITE_32, parisc32_dir_class); + audit_register_class(AUDIT_CLASS_CHATTR_32, parisc32_chattr_class); + audit_register_class(AUDIT_CLASS_SIGNAL_32, parisc32_signal_class); +#endif + audit_register_class(AUDIT_CLASS_WRITE, write_class); + audit_register_class(AUDIT_CLASS_READ, read_class); + audit_register_class(AUDIT_CLASS_DIR_WRITE, dir_class); + audit_register_class(AUDIT_CLASS_CHATTR, chattr_class); + audit_register_class(AUDIT_CLASS_SIGNAL, signal_class); + return 0; +} + +__initcall(audit_classes_init); diff --git a/arch/parisc/kernel/cache.c b/arch/parisc/kernel/cache.c index b521c0adf4e..c035673209f 100644 --- a/arch/parisc/kernel/cache.c +++ b/arch/parisc/kernel/cache.c @@ -602,7 +602,6 @@ flush_cache_page(struct vm_area_struct *vma, unsigned long vmaddr, unsigned long __flush_cache_page(vma, vmaddr, PFN_PHYS(pfn)); } } -EXPORT_SYMBOL_GPL(flush_cache_page); #ifdef CONFIG_PARISC_TMPALIAS diff --git a/arch/parisc/kernel/compat_audit.c b/arch/parisc/kernel/compat_audit.c new file mode 100644 index 00000000000..c74478f6bc7 --- /dev/null +++ b/arch/parisc/kernel/compat_audit.c @@ -0,0 +1,40 @@ +#include <asm/unistd.h> + +unsigned int parisc32_dir_class[] = { +#include <asm-generic/audit_dir_write.h> +~0U +}; + +unsigned int parisc32_chattr_class[] = { +#include <asm-generic/audit_change_attr.h> +~0U +}; + +unsigned int parisc32_write_class[] = { +#include <asm-generic/audit_write.h> +~0U +}; + +unsigned int parisc32_read_class[] = { +#include <asm-generic/audit_read.h> +~0U +}; + +unsigned int parisc32_signal_class[] = { +#include <asm-generic/audit_signal.h> +~0U +}; + +int parisc32_classify_syscall(unsigned syscall) +{ + switch (syscall) { + case __NR_open: + return 2; + case __NR_openat: + return 3; + case __NR_execve: + return 5; + default: + return 1; + } +} diff --git a/arch/parisc/kernel/head.S b/arch/parisc/kernel/head.S index 37aabd772fb..d2d58258aea 100644 --- a/arch/parisc/kernel/head.S +++ b/arch/parisc/kernel/head.S @@ -195,6 +195,8 @@ common_stext: ldw MEM_PDC_HI(%r0),%r6 depd %r6, 31, 32, %r3 /* move to upper word */ + mfctl %cr30,%r6 /* PCX-W2 firmware bug */ + ldo PDC_PSW(%r0),%arg0 /* 21 */ ldo PDC_PSW_SET_DEFAULTS(%r0),%arg1 /* 2 */ ldo PDC_PSW_WIDE_BIT(%r0),%arg2 /* 2 */ @@ -203,6 +205,8 @@ common_stext: copy %r0,%arg3 stext_pdc_ret: + mtctl %r6,%cr30 /* restore task thread info */ + /* restore rfi target address*/ ldd TI_TASK-THREAD_SZ_ALGN(%sp), %r10 tophys_r1 %r10 diff --git a/arch/parisc/kernel/irq.c b/arch/parisc/kernel/irq.c index 2e6443b1e92..501ac8b4dcd 100644 --- a/arch/parisc/kernel/irq.c +++ b/arch/parisc/kernel/irq.c @@ -179,10 +179,6 @@ int arch_show_interrupts(struct seq_file *p, int prec) for_each_online_cpu(j) seq_printf(p, "%10u ", irq_stats(j)->irq_resched_count); seq_puts(p, " Rescheduling interrupts\n"); - seq_printf(p, "%*s: ", prec, "CAL"); - for_each_online_cpu(j) - seq_printf(p, "%10u ", irq_stats(j)->irq_call_count); - seq_puts(p, " Function call interrupts\n"); #endif seq_printf(p, "%*s: ", prec, "UAH"); for_each_online_cpu(j) diff --git a/arch/parisc/kernel/ptrace.c b/arch/parisc/kernel/ptrace.c index 534abd4936e..e842ee233db 100644 --- a/arch/parisc/kernel/ptrace.c +++ b/arch/parisc/kernel/ptrace.c @@ -19,6 +19,7 @@ #include <linux/security.h> #include <linux/compat.h> #include <linux/signal.h> +#include <linux/audit.h> #include <asm/uaccess.h> #include <asm/pgtable.h> @@ -267,11 +268,28 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request, long do_syscall_trace_enter(struct pt_regs *regs) { + long ret = 0; + if (test_thread_flag(TIF_SYSCALL_TRACE) && tracehook_report_syscall_entry(regs)) - return -1L; - - return regs->gr[20]; + ret = -1L; + +#ifdef CONFIG_64BIT + if (!is_compat_task()) + audit_syscall_entry(AUDIT_ARCH_PARISC64, + regs->gr[20], + regs->gr[26], regs->gr[25], + regs->gr[24], regs->gr[23]); + else +#endif + audit_syscall_entry(AUDIT_ARCH_PARISC, + regs->gr[20] & 0xffffffff, + regs->gr[26] & 0xffffffff, + regs->gr[25] & 0xffffffff, + regs->gr[24] & 0xffffffff, + regs->gr[23] & 0xffffffff); + + return ret ? : regs->gr[20]; } void do_syscall_trace_exit(struct pt_regs *regs) @@ -279,6 +297,8 @@ void do_syscall_trace_exit(struct pt_regs *regs) int stepping = test_thread_flag(TIF_SINGLESTEP) || test_thread_flag(TIF_BLOCKSTEP); + audit_syscall_exit(regs); + if (stepping || test_thread_flag(TIF_SYSCALL_TRACE)) tracehook_report_syscall_exit(regs, stepping); } diff --git a/arch/parisc/kernel/setup.c b/arch/parisc/kernel/setup.c index 7349a3fedfc..72a3c658ad7 100644 --- a/arch/parisc/kernel/setup.c +++ b/arch/parisc/kernel/setup.c @@ -318,8 +318,12 @@ static int __init parisc_init(void) pdc_stable_write(0x40, &osid, sizeof(osid)); processor_init(); - printk(KERN_INFO "CPU(s): %d x %s at %d.%06d MHz\n", - num_present_cpus(), +#ifdef CONFIG_SMP + pr_info("CPU(s): %d out of %d %s at %d.%06d MHz online\n", + num_online_cpus(), num_present_cpus(), +#else + pr_info("CPU(s): 1 x %s at %d.%06d MHz\n", +#endif boot_cpu_data.cpu_name, boot_cpu_data.cpu_hz / 1000000, boot_cpu_data.cpu_hz % 1000000 ); diff --git a/arch/parisc/kernel/smp.c b/arch/parisc/kernel/smp.c index 2b96602e812..ceda229ea6c 100644 --- a/arch/parisc/kernel/smp.c +++ b/arch/parisc/kernel/smp.c @@ -125,11 +125,6 @@ ipi_interrupt(int irq, void *dev_id) unsigned long ops; unsigned long flags; - /* Count this now; we may make a call that never returns. */ - inc_irq_stat(irq_call_count); - - mb(); /* Order interrupt and bit testing. */ - for (;;) { spinlock_t *lock = &per_cpu(ipi_lock, this_cpu); spin_lock_irqsave(lock, flags); diff --git a/arch/parisc/kernel/syscall.S b/arch/parisc/kernel/syscall.S index e767ab733e3..a63bb179f79 100644 --- a/arch/parisc/kernel/syscall.S +++ b/arch/parisc/kernel/syscall.S @@ -649,10 +649,8 @@ cas_action: /* Two exception table entries, one for the load, the other for the store. Either return -EFAULT. Each of the entries must be relocated. */ - .section __ex_table,"aw" - ASM_ULONG_INSN (1b - linux_gateway_page), (3b - linux_gateway_page) - ASM_ULONG_INSN (2b - linux_gateway_page), (3b - linux_gateway_page) - .previous + ASM_EXCEPTIONTABLE_ENTRY(1b-linux_gateway_page, 3b-linux_gateway_page) + ASM_EXCEPTIONTABLE_ENTRY(2b-linux_gateway_page, 3b-linux_gateway_page) /* Make sure nothing else is placed on this page */ diff --git a/arch/parisc/lib/Makefile b/arch/parisc/lib/Makefile index 5651536ac73..8fa92b8d839 100644 --- a/arch/parisc/lib/Makefile +++ b/arch/parisc/lib/Makefile @@ -3,6 +3,6 @@ # lib-y := lusercopy.o bitops.o checksum.o io.o memset.o fixup.o memcpy.o \ - ucmpdi2.o + ucmpdi2.o delay.o obj-y := iomap.o diff --git a/arch/parisc/lib/delay.c b/arch/parisc/lib/delay.c new file mode 100644 index 00000000000..ec9255f27a8 --- /dev/null +++ b/arch/parisc/lib/delay.c @@ -0,0 +1,73 @@ +/* + * Precise Delay Loops for parisc + * + * based on code by: + * Copyright (C) 1993 Linus Torvalds + * Copyright (C) 1997 Martin Mares <mj@atrey.karlin.mff.cuni.cz> + * Copyright (C) 2008 Jiri Hladky <hladky _dot_ jiri _at_ gmail _dot_ com> + * + * parisc implementation: + * Copyright (C) 2013 Helge Deller <deller@gmx.de> + */ + + +#include <linux/module.h> +#include <linux/preempt.h> +#include <linux/init.h> + +#include <asm/processor.h> +#include <asm/delay.h> + +#include <asm/special_insns.h> /* for mfctl() */ +#include <asm/processor.h> /* for boot_cpu_data */ + +/* CR16 based delay: */ +static void __cr16_delay(unsigned long __loops) +{ + /* + * Note: Due to unsigned math, cr16 rollovers shouldn't be + * a problem here. However, on 32 bit, we need to make sure + * we don't pass in too big a value. The current default + * value of MAX_UDELAY_MS should help prevent this. + */ + u32 bclock, now, loops = __loops; + int cpu; + + preempt_disable(); + cpu = smp_processor_id(); + bclock = mfctl(16); + for (;;) { + now = mfctl(16); + if ((now - bclock) >= loops) + break; + + /* Allow RT tasks to run */ + preempt_enable(); + asm volatile(" nop\n"); + barrier(); + preempt_disable(); + + /* + * It is possible that we moved to another CPU, and + * since CR16's are per-cpu we need to calculate + * that. The delay must guarantee that we wait "at + * least" the amount of time. Being moved to another + * CPU could make the wait longer but we just need to + * make sure we waited long enough. Rebalance the + * counter for this CPU. + */ + if (unlikely(cpu != smp_processor_id())) { + loops -= (now - bclock); + cpu = smp_processor_id(); + bclock = mfctl(16); + } + } + preempt_enable(); +} + + +void __udelay(unsigned long usecs) +{ + __cr16_delay(usecs * ((unsigned long)boot_cpu_data.cpu_hz / 1000000UL)); +} +EXPORT_SYMBOL(__udelay); diff --git a/arch/parisc/lib/lusercopy.S b/arch/parisc/lib/lusercopy.S index 6f2d9355efe..a512f07d4fe 100644 --- a/arch/parisc/lib/lusercopy.S +++ b/arch/parisc/lib/lusercopy.S @@ -88,9 +88,7 @@ ENDPROC(lclear_user) ldo 1(%r25),%r25 .previous - .section __ex_table,"aw" - ASM_ULONG_INSN 1b,2b - .previous + ASM_EXCEPTIONTABLE_ENTRY(1b,2b) .procend @@ -129,10 +127,8 @@ ENDPROC(lstrnlen_user) copy %r24,%r26 /* reset r26 so 0 is returned on fault */ .previous - .section __ex_table,"aw" - ASM_ULONG_INSN 1b,3b - ASM_ULONG_INSN 2b,3b - .previous + ASM_EXCEPTIONTABLE_ENTRY(1b,3b) + ASM_EXCEPTIONTABLE_ENTRY(2b,3b) .procend diff --git a/arch/parisc/math-emu/float.h b/arch/parisc/math-emu/float.h index ce76f6dfa25..7a51f97e72e 100644 --- a/arch/parisc/math-emu/float.h +++ b/arch/parisc/math-emu/float.h @@ -484,7 +484,6 @@ typedef int VOID; * | |G|L|E|U|X| * +-------+-------+-------+-------+-------+-------+-------+-------+ */ -#define Allexception(object) (object) #define Greaterthanbit(object) Bitfield_extract( 27, 1,object) #define Lessthanbit(object) Bitfield_extract( 28, 1,object) #define Equalbit(object) Bitfield_extract( 29, 1,object) diff --git a/arch/parisc/mm/fault.c b/arch/parisc/mm/fault.c index 0293588d5b8..7584a5df0fa 100644 --- a/arch/parisc/mm/fault.c +++ b/arch/parisc/mm/fault.c @@ -142,6 +142,12 @@ int fixup_exception(struct pt_regs *regs) { const struct exception_table_entry *fix; + /* If we only stored 32bit addresses in the exception table we can drop + * out if we faulted on a 64bit address. */ + if ((sizeof(regs->iaoq[0]) > sizeof(fix->insn)) + && (regs->iaoq[0] >> 32)) + return 0; + fix = search_exception_tables(regs->iaoq[0]); if (fix) { struct exception_data *d; @@ -274,12 +280,22 @@ bad_area: } show_regs(regs); #endif - /* FIXME: actually we need to get the signo and code correct */ - si.si_signo = SIGSEGV; + switch (code) { + case 15: /* Data TLB miss fault/Data page fault */ + case 17: /* NA data TLB miss / page fault */ + case 18: /* Unaligned access - PCXS only */ + si.si_signo = SIGBUS; + si.si_code = BUS_ADRERR; + break; + case 16: /* Non-access instruction TLB miss fault */ + case 26: /* PCXL: Data memory access rights trap */ + default: + si.si_signo = SIGSEGV; + si.si_code = SEGV_MAPERR; + } si.si_errno = 0; - si.si_code = SEGV_MAPERR; si.si_addr = (void __user *) address; - force_sig_info(SIGSEGV, &si, current); + force_sig_info(si.si_signo, &si, current); return; } diff --git a/arch/powerpc/kernel/ibmebus.c b/arch/powerpc/kernel/ibmebus.c index 16a7c2326d4..1114d13ac19 100644 --- a/arch/powerpc/kernel/ibmebus.c +++ b/arch/powerpc/kernel/ibmebus.c @@ -292,6 +292,7 @@ out: return rc; return count; } +static BUS_ATTR(probe, S_IWUSR, NULL, ibmebus_store_probe); static ssize_t ibmebus_store_remove(struct bus_type *bus, const char *buf, size_t count) @@ -317,13 +318,14 @@ static ssize_t ibmebus_store_remove(struct bus_type *bus, return -ENODEV; } } +static BUS_ATTR(remove, S_IWUSR, NULL, ibmebus_store_remove); - -static struct bus_attribute ibmebus_bus_attrs[] = { - __ATTR(probe, S_IWUSR, NULL, ibmebus_store_probe), - __ATTR(remove, S_IWUSR, NULL, ibmebus_store_remove), - __ATTR_NULL +static struct attribute *ibmbus_bus_attrs[] = { + &bus_attr_probe.attr, + &bus_attr_remove.attr, + NULL, }; +ATTRIBUTE_GROUPS(ibmbus_bus); static int ibmebus_bus_bus_match(struct device *dev, struct device_driver *drv) { @@ -713,7 +715,7 @@ static struct dev_pm_ops ibmebus_bus_dev_pm_ops = { struct bus_type ibmebus_bus_type = { .name = "ibmebus", .uevent = of_device_uevent_modalias, - .bus_attrs = ibmebus_bus_attrs, + .bus_groups = ibmbus_bus_groups, .match = ibmebus_bus_bus_match, .probe = ibmebus_bus_device_probe, .remove = ibmebus_bus_device_remove, diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c index d38cc08b16c..408956fbf4f 100644 --- a/arch/powerpc/kernel/vio.c +++ b/arch/powerpc/kernel/vio.c @@ -997,21 +997,36 @@ static struct device_attribute vio_cmo_dev_attrs[] = { /* sysfs bus functions and data structures for CMO */ #define viobus_cmo_rd_attr(name) \ -static ssize_t \ -viobus_cmo_##name##_show(struct bus_type *bt, char *buf) \ +static ssize_t cmo_##name##_show(struct bus_type *bt, char *buf) \ { \ return sprintf(buf, "%lu\n", vio_cmo.name); \ -} +} \ +static BUS_ATTR_RO(cmo_##name) #define viobus_cmo_pool_rd_attr(name, var) \ static ssize_t \ -viobus_cmo_##name##_pool_show_##var(struct bus_type *bt, char *buf) \ +cmo_##name##_##var##_show(struct bus_type *bt, char *buf) \ { \ return sprintf(buf, "%lu\n", vio_cmo.name.var); \ +} \ +static BUS_ATTR_RO(cmo_##name##_##var) + +viobus_cmo_rd_attr(entitled); +viobus_cmo_rd_attr(spare); +viobus_cmo_rd_attr(min); +viobus_cmo_rd_attr(desired); +viobus_cmo_rd_attr(curr); +viobus_cmo_pool_rd_attr(reserve, size); +viobus_cmo_pool_rd_attr(excess, size); +viobus_cmo_pool_rd_attr(excess, free); + +static ssize_t cmo_high_show(struct bus_type *bt, char *buf) +{ + return sprintf(buf, "%lu\n", vio_cmo.high); } -static ssize_t viobus_cmo_high_reset(struct bus_type *bt, const char *buf, - size_t count) +static ssize_t cmo_high_store(struct bus_type *bt, const char *buf, + size_t count) { unsigned long flags; @@ -1021,35 +1036,26 @@ static ssize_t viobus_cmo_high_reset(struct bus_type *bt, const char *buf, return count; } - -viobus_cmo_rd_attr(entitled); -viobus_cmo_pool_rd_attr(reserve, size); -viobus_cmo_pool_rd_attr(excess, size); -viobus_cmo_pool_rd_attr(excess, free); -viobus_cmo_rd_attr(spare); -viobus_cmo_rd_attr(min); -viobus_cmo_rd_attr(desired); -viobus_cmo_rd_attr(curr); -viobus_cmo_rd_attr(high); - -static struct bus_attribute vio_cmo_bus_attrs[] = { - __ATTR(cmo_entitled, S_IRUGO, viobus_cmo_entitled_show, NULL), - __ATTR(cmo_reserve_size, S_IRUGO, viobus_cmo_reserve_pool_show_size, NULL), - __ATTR(cmo_excess_size, S_IRUGO, viobus_cmo_excess_pool_show_size, NULL), - __ATTR(cmo_excess_free, S_IRUGO, viobus_cmo_excess_pool_show_free, NULL), - __ATTR(cmo_spare, S_IRUGO, viobus_cmo_spare_show, NULL), - __ATTR(cmo_min, S_IRUGO, viobus_cmo_min_show, NULL), - __ATTR(cmo_desired, S_IRUGO, viobus_cmo_desired_show, NULL), - __ATTR(cmo_curr, S_IRUGO, viobus_cmo_curr_show, NULL), - __ATTR(cmo_high, S_IWUSR|S_IRUSR|S_IWGRP|S_IRGRP|S_IROTH, - viobus_cmo_high_show, viobus_cmo_high_reset), - __ATTR_NULL +static BUS_ATTR_RW(cmo_high); + +static struct attribute *vio_bus_attrs[] = { + &bus_attr_cmo_entitled.attr, + &bus_attr_cmo_spare.attr, + &bus_attr_cmo_min.attr, + &bus_attr_cmo_desired.attr, + &bus_attr_cmo_curr.attr, + &bus_attr_cmo_high.attr, + &bus_attr_cmo_reserve_size.attr, + &bus_attr_cmo_excess_size.attr, + &bus_attr_cmo_excess_free.attr, + NULL, }; +ATTRIBUTE_GROUPS(vio_bus); static void vio_cmo_sysfs_init(void) { vio_bus_type.dev_attrs = vio_cmo_dev_attrs; - vio_bus_type.bus_attrs = vio_cmo_bus_attrs; + vio_bus_type.bus_groups = vio_bus_groups; } #else /* CONFIG_PPC_SMLPAR */ int vio_cmo_entitlement_update(size_t new_entitlement) { return 0; } diff --git a/arch/powerpc/net/bpf_jit_comp.c b/arch/powerpc/net/bpf_jit_comp.c index bf56e33f825..2345bdb4d91 100644 --- a/arch/powerpc/net/bpf_jit_comp.c +++ b/arch/powerpc/net/bpf_jit_comp.c @@ -691,4 +691,5 @@ void bpf_jit_free(struct sk_filter *fp) { if (fp->bpf_func != sk_run_filter) module_free(NULL, fp->bpf_func); + kfree(fp); } diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index 7143793859f..f75d7e51792 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -99,6 +99,7 @@ config S390 select CLONE_BACKWARDS2 select GENERIC_CLOCKEVENTS select GENERIC_CPU_DEVICES if !SMP + select GENERIC_FIND_FIRST_BIT select GENERIC_SMP_IDLE_THREAD select GENERIC_TIME_VSYSCALL_OLD select HAVE_ALIGNED_STRUCT_PAGE if SLUB @@ -237,6 +238,67 @@ config MARCH_ZEC12 endchoice +config MARCH_G5_TUNE + def_bool TUNE_G5 || MARCH_G5 && TUNE_DEFAULT + +config MARCH_Z900_TUNE + def_bool TUNE_Z900 || MARCH_Z900 && TUNE_DEFAULT + +config MARCH_Z990_TUNE + def_bool TUNE_Z990 || MARCH_Z990 && TUNE_DEFAULT + +config MARCH_Z9_109_TUNE + def_bool TUNE_Z9_109 || MARCH_Z9_109 && TUNE_DEFAULT + +config MARCH_Z10_TUNE + def_bool TUNE_Z10 || MARCH_Z10 && TUNE_DEFAULT + +config MARCH_Z196_TUNE + def_bool TUNE_Z196 || MARCH_Z196 && TUNE_DEFAULT + +config MARCH_ZEC12_TUNE + def_bool TUNE_ZEC12 || MARCH_ZEC12 && TUNE_DEFAULT + +choice + prompt "Tune code generation" + default TUNE_DEFAULT + help + Cause the compiler to tune (-mtune) the generated code for a machine. + This will make the code run faster on the selected machine but + somewhat slower on other machines. + This option only changes how the compiler emits instructions, not the + selection of instructions itself, so the resulting kernel will run on + all other machines. + +config TUNE_DEFAULT + bool "Default" + help + Tune the generated code for the target processor for which the kernel + will be compiled. + +config TUNE_G5 + bool "System/390 model G5 and G6" + +config TUNE_Z900 + bool "IBM zSeries model z800 and z900" + +config TUNE_Z990 + bool "IBM zSeries model z890 and z990" + +config TUNE_Z9_109 + bool "IBM System z9" + +config TUNE_Z10 + bool "IBM System z10" + +config TUNE_Z196 + bool "IBM zEnterprise 114 and 196" + +config TUNE_ZEC12 + bool "IBM zBC12 and zEC12" + +endchoice + config 64BIT def_bool y prompt "64 bit kernel" diff --git a/arch/s390/Makefile b/arch/s390/Makefile index a7d68a467ce..874e6d6e9c5 100644 --- a/arch/s390/Makefile +++ b/arch/s390/Makefile @@ -35,13 +35,21 @@ endif export LD_BFD -cflags-$(CONFIG_MARCH_G5) += $(call cc-option,-march=g5) -cflags-$(CONFIG_MARCH_Z900) += $(call cc-option,-march=z900) -cflags-$(CONFIG_MARCH_Z990) += $(call cc-option,-march=z990) -cflags-$(CONFIG_MARCH_Z9_109) += $(call cc-option,-march=z9-109) -cflags-$(CONFIG_MARCH_Z10) += $(call cc-option,-march=z10) -cflags-$(CONFIG_MARCH_Z196) += $(call cc-option,-march=z196) -cflags-$(CONFIG_MARCH_ZEC12) += $(call cc-option,-march=zEC12) +cflags-$(CONFIG_MARCH_G5) += -march=g5 +cflags-$(CONFIG_MARCH_Z900) += -march=z900 +cflags-$(CONFIG_MARCH_Z990) += -march=z990 +cflags-$(CONFIG_MARCH_Z9_109) += -march=z9-109 +cflags-$(CONFIG_MARCH_Z10) += -march=z10 +cflags-$(CONFIG_MARCH_Z196) += -march=z196 +cflags-$(CONFIG_MARCH_ZEC12) += -march=zEC12 + +cflags-$(CONFIG_MARCH_G5_TUNE) += -mtune=g5 +cflags-$(CONFIG_MARCH_Z900_TUNE) += -mtune=z900 +cflags-$(CONFIG_MARCH_Z990_TUNE) += -mtune=z990 +cflags-$(CONFIG_MARCH_Z9_109_TUNE) += -mtune=z9-109 +cflags-$(CONFIG_MARCH_Z10_TUNE) += -mtune=z10 +cflags-$(CONFIG_MARCH_Z196_TUNE) += -mtune=z196 +cflags-$(CONFIG_MARCH_ZEC12_TUNE) += -mtune=zEC12 #KBUILD_IMAGE is necessary for make rpm KBUILD_IMAGE :=arch/s390/boot/image diff --git a/arch/s390/appldata/appldata_base.c b/arch/s390/appldata/appldata_base.c index 87a22092b68..4c4a1cef520 100644 --- a/arch/s390/appldata/appldata_base.c +++ b/arch/s390/appldata/appldata_base.c @@ -48,9 +48,9 @@ static struct platform_device *appldata_pdev; * /proc entries (sysctl) */ static const char appldata_proc_name[APPLDATA_PROC_NAME_LENGTH] = "appldata"; -static int appldata_timer_handler(ctl_table *ctl, int write, +static int appldata_timer_handler(struct ctl_table *ctl, int write, void __user *buffer, size_t *lenp, loff_t *ppos); -static int appldata_interval_handler(ctl_table *ctl, int write, +static int appldata_interval_handler(struct ctl_table *ctl, int write, void __user *buffer, size_t *lenp, loff_t *ppos); @@ -201,10 +201,10 @@ static void __appldata_vtimer_setup(int cmd) * Start/Stop timer, show status of timer (0 = not active, 1 = active) */ static int -appldata_timer_handler(ctl_table *ctl, int write, +appldata_timer_handler(struct ctl_table *ctl, int write, void __user *buffer, size_t *lenp, loff_t *ppos) { - int len; + unsigned int len; char buf[2]; if (!*lenp || *ppos) { @@ -243,10 +243,11 @@ out: * current timer interval. */ static int -appldata_interval_handler(ctl_table *ctl, int write, +appldata_interval_handler(struct ctl_table *ctl, int write, void __user *buffer, size_t *lenp, loff_t *ppos) { - int len, interval; + unsigned int len; + int interval; char buf[16]; if (!*lenp || *ppos) { @@ -286,11 +287,12 @@ out: * monitoring (0 = not in process, 1 = in process) */ static int -appldata_generic_handler(ctl_table *ctl, int write, +appldata_generic_handler(struct ctl_table *ctl, int write, void __user *buffer, size_t *lenp, loff_t *ppos) { struct appldata_ops *ops = NULL, *tmp_ops; - int rc, len, found; + unsigned int len; + int rc, found; char buf[2]; struct list_head *lh; diff --git a/arch/s390/configs/default_defconfig b/arch/s390/configs/default_defconfig new file mode 100644 index 00000000000..e0af2ee5875 --- /dev/null +++ b/arch/s390/configs/default_defconfig @@ -0,0 +1,655 @@ +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y +CONFIG_AUDIT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_TASKSTATS=y +CONFIG_TASK_DELAY_ACCT=y +CONFIG_TASK_XACCT=y +CONFIG_TASK_IO_ACCOUNTING=y +CONFIG_RCU_FAST_NO_HZ=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_CGROUP_FREEZER=y +CONFIG_CGROUP_DEVICE=y +CONFIG_CPUSETS=y +CONFIG_CGROUP_CPUACCT=y +CONFIG_RESOURCE_COUNTERS=y +CONFIG_CGROUP_PERF=y +CONFIG_CFS_BANDWIDTH=y +CONFIG_RT_GROUP_SCHED=y +CONFIG_BLK_CGROUP=y +CONFIG_SCHED_AUTOGROUP=y +CONFIG_BLK_DEV_INITRD=y +# CONFIG_COMPAT_BRK is not set +CONFIG_PROFILING=y +CONFIG_OPROFILE=m +CONFIG_KPROBES=y +CONFIG_JUMP_LABEL=y +CONFIG_MODULES=y +CONFIG_MODULE_FORCE_LOAD=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_BLK_DEV_INTEGRITY=y +CONFIG_BLK_DEV_THROTTLING=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_IBM_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +CONFIG_CFQ_GROUP_IOSCHED=y +CONFIG_DEFAULT_DEADLINE=y +CONFIG_MARCH_Z9_109=y +CONFIG_PREEMPT=y +CONFIG_HZ_100=y +CONFIG_MEMORY_HOTPLUG=y +CONFIG_MEMORY_HOTREMOVE=y +CONFIG_KSM=y +CONFIG_TRANSPARENT_HUGEPAGE=y +CONFIG_PCI=y +CONFIG_PCI_DEBUG=y +CONFIG_HOTPLUG_PCI=y +CONFIG_HOTPLUG_PCI_S390=y +CONFIG_CHSC_SCH=y +CONFIG_CRASH_DUMP=y +CONFIG_ZFCPDUMP=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_BINFMT_MISC=m +CONFIG_HIBERNATION=y +CONFIG_PACKET=y +CONFIG_PACKET_DIAG=m +CONFIG_UNIX=y +CONFIG_UNIX_DIAG=m +CONFIG_XFRM_USER=m +CONFIG_NET_KEY=m +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE_DEMUX=m +CONFIG_NET_IPGRE=m +CONFIG_NET_IPGRE_BROADCAST=y +CONFIG_IP_MROUTE=y +CONFIG_IP_MROUTE_MULTIPLE_TABLES=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y +CONFIG_SYN_COOKIES=y +CONFIG_NET_IPVTI=m +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_MODE_TRANSPORT=m +CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m +CONFIG_INET_DIAG=m +CONFIG_INET_UDP_DIAG=m +CONFIG_TCP_CONG_ADVANCED=y +CONFIG_TCP_CONG_HSTCP=m +CONFIG_TCP_CONG_HYBLA=m +CONFIG_TCP_CONG_SCALABLE=m +CONFIG_TCP_CONG_LP=m +CONFIG_TCP_CONG_VENO=m +CONFIG_TCP_CONG_YEAH=m +CONFIG_TCP_CONG_ILLINOIS=m +CONFIG_IPV6=y +CONFIG_IPV6_PRIVACY=y +CONFIG_IPV6_ROUTER_PREF=y +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_IPV6_MIP6=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m +CONFIG_IPV6_SIT=m +CONFIG_IPV6_GRE=m +CONFIG_IPV6_MULTIPLE_TABLES=y +CONFIG_IPV6_SUBTREES=y +CONFIG_NETFILTER=y +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_SECMARK=y +CONFIG_NF_CONNTRACK_EVENTS=y +CONFIG_NF_CONNTRACK_TIMEOUT=y +CONFIG_NF_CONNTRACK_TIMESTAMP=y +CONFIG_NF_CT_PROTO_DCCP=m +CONFIG_NF_CT_PROTO_UDPLITE=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_SNMP=m +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NF_CT_NETLINK=m +CONFIG_NF_CT_NETLINK_TIMEOUT=m +CONFIG_NETFILTER_TPROXY=m +CONFIG_NETFILTER_XT_SET=m +CONFIG_NETFILTER_XT_TARGET_AUDIT=m +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m +CONFIG_NETFILTER_XT_TARGET_CT=m +CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HMARK=m +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m +CONFIG_NETFILTER_XT_TARGET_LOG=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_TEE=m +CONFIG_NETFILTER_XT_TARGET_TPROXY=m +CONFIG_NETFILTER_XT_TARGET_TRACE=m +CONFIG_NETFILTER_XT_TARGET_SECMARK=m +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +CONFIG_NETFILTER_XT_MATCH_BPF=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m +CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_CPU=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_IPRANGE=m +CONFIG_NETFILTER_XT_MATCH_IPVS=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_NFACCT=m +CONFIG_NETFILTER_XT_MATCH_OSF=m +CONFIG_NETFILTER_XT_MATCH_OWNER=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_QUOTA=m +CONFIG_NETFILTER_XT_MATCH_RATEEST=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_RECENT=m +CONFIG_NETFILTER_XT_MATCH_SOCKET=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STATISTIC=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_TIME=m +CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_SET=m +CONFIG_IP_SET_BITMAP_IP=m +CONFIG_IP_SET_BITMAP_IPMAC=m +CONFIG_IP_SET_BITMAP_PORT=m +CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPPORT=m +CONFIG_IP_SET_HASH_IPPORTIP=m +CONFIG_IP_SET_HASH_IPPORTNET=m +CONFIG_IP_SET_HASH_NET=m +CONFIG_IP_SET_HASH_NETPORT=m +CONFIG_IP_SET_HASH_NETIFACE=m +CONFIG_IP_SET_LIST_SET=m +CONFIG_IP_VS=m +CONFIG_IP_VS_PROTO_TCP=y +CONFIG_IP_VS_PROTO_UDP=y +CONFIG_IP_VS_PROTO_ESP=y +CONFIG_IP_VS_PROTO_AH=y +CONFIG_IP_VS_RR=m +CONFIG_IP_VS_WRR=m +CONFIG_IP_VS_LC=m +CONFIG_IP_VS_WLC=m +CONFIG_IP_VS_LBLC=m +CONFIG_IP_VS_LBLCR=m +CONFIG_IP_VS_DH=m +CONFIG_IP_VS_SH=m +CONFIG_IP_VS_SED=m +CONFIG_IP_VS_NQ=m +CONFIG_IP_VS_FTP=m +CONFIG_IP_VS_PE_SIP=m +CONFIG_NF_CONNTRACK_IPV4=m +# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_RPFILTER=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_NF_NAT_IPV4=m +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_SECURITY=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m +CONFIG_NF_CONNTRACK_IPV6=m +CONFIG_IP6_NF_IPTABLES=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_EUI64=m +CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_HL=m +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RPFILTER=m +CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_MANGLE=m +CONFIG_IP6_NF_RAW=m +CONFIG_IP6_NF_SECURITY=m +CONFIG_NF_NAT_IPV6=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +CONFIG_IP6_NF_TARGET_NPT=m +CONFIG_NET_SCTPPROBE=m +CONFIG_RDS=m +CONFIG_RDS_RDMA=m +CONFIG_RDS_TCP=m +CONFIG_RDS_DEBUG=y +CONFIG_L2TP=m +CONFIG_L2TP_DEBUGFS=m +CONFIG_L2TP_V3=y +CONFIG_L2TP_IP=m +CONFIG_L2TP_ETH=m +CONFIG_BRIDGE=m +CONFIG_VLAN_8021Q=m +CONFIG_VLAN_8021Q_GVRP=y +CONFIG_NET_SCHED=y +CONFIG_NET_SCH_CBQ=m +CONFIG_NET_SCH_HTB=m +CONFIG_NET_SCH_HFSC=m +CONFIG_NET_SCH_PRIO=m +CONFIG_NET_SCH_MULTIQ=m +CONFIG_NET_SCH_RED=m +CONFIG_NET_SCH_SFB=m +CONFIG_NET_SCH_SFQ=m +CONFIG_NET_SCH_TEQL=m +CONFIG_NET_SCH_TBF=m +CONFIG_NET_SCH_GRED=m +CONFIG_NET_SCH_DSMARK=m +CONFIG_NET_SCH_NETEM=m +CONFIG_NET_SCH_DRR=m +CONFIG_NET_SCH_MQPRIO=m +CONFIG_NET_SCH_CHOKE=m +CONFIG_NET_SCH_QFQ=m +CONFIG_NET_SCH_CODEL=m +CONFIG_NET_SCH_FQ_CODEL=m +CONFIG_NET_SCH_INGRESS=m +CONFIG_NET_SCH_PLUG=m +CONFIG_NET_CLS_BASIC=m +CONFIG_NET_CLS_TCINDEX=m +CONFIG_NET_CLS_ROUTE4=m +CONFIG_NET_CLS_FW=m +CONFIG_NET_CLS_U32=m +CONFIG_CLS_U32_PERF=y +CONFIG_CLS_U32_MARK=y +CONFIG_NET_CLS_RSVP=m +CONFIG_NET_CLS_RSVP6=m +CONFIG_NET_CLS_FLOW=m +CONFIG_NET_CLS_CGROUP=y +CONFIG_NET_CLS_ACT=y +CONFIG_NET_ACT_POLICE=m +CONFIG_NET_ACT_GACT=m +CONFIG_GACT_PROB=y +CONFIG_NET_ACT_MIRRED=m +CONFIG_NET_ACT_IPT=m +CONFIG_NET_ACT_NAT=m +CONFIG_NET_ACT_PEDIT=m +CONFIG_NET_ACT_SIMP=m +CONFIG_NET_ACT_SKBEDIT=m +CONFIG_NET_ACT_CSUM=m +CONFIG_DNS_RESOLVER=y +CONFIG_BPF_JIT=y +CONFIG_NET_PKTGEN=m +CONFIG_NET_TCPPROBE=m +CONFIG_DEVTMPFS=y +CONFIG_CONNECTOR=y +CONFIG_BLK_DEV_LOOP=m +CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_NBD=m +CONFIG_BLK_DEV_OSD=m +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=32768 +CONFIG_BLK_DEV_XIP=y +CONFIG_CDROM_PKTCDVD=m +CONFIG_ATA_OVER_ETH=m +CONFIG_VIRTIO_BLK=y +CONFIG_ENCLOSURE_SERVICES=m +CONFIG_RAID_ATTRS=m +CONFIG_SCSI=y +CONFIG_SCSI_TGT=m +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=m +CONFIG_CHR_DEV_OSST=m +CONFIG_BLK_DEV_SR=m +CONFIG_CHR_DEV_SG=y +CONFIG_CHR_DEV_SCH=m +CONFIG_SCSI_ENCLOSURE=m +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_CONSTANTS=y +CONFIG_SCSI_LOGGING=y +CONFIG_SCSI_SPI_ATTRS=m +CONFIG_SCSI_SAS_LIBSAS=m +CONFIG_SCSI_SRP_ATTRS=m +CONFIG_SCSI_SRP_TGT_ATTRS=y +CONFIG_ISCSI_TCP=m +CONFIG_LIBFCOE=m +CONFIG_SCSI_DEBUG=m +CONFIG_ZFCP=y +CONFIG_SCSI_VIRTIO=m +CONFIG_SCSI_DH=m +CONFIG_SCSI_DH_RDAC=m +CONFIG_SCSI_DH_HP_SW=m +CONFIG_SCSI_DH_EMC=m +CONFIG_SCSI_DH_ALUA=m +CONFIG_SCSI_OSD_INITIATOR=m +CONFIG_SCSI_OSD_ULD=m +CONFIG_MD=y +CONFIG_BLK_DEV_MD=y +CONFIG_MD_LINEAR=m +CONFIG_MD_RAID0=m +CONFIG_MD_MULTIPATH=m +CONFIG_MD_FAULTY=m +CONFIG_BLK_DEV_DM=m +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=m +CONFIG_DM_RAID=m +CONFIG_DM_LOG_USERSPACE=m +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_QL=m +CONFIG_DM_MULTIPATH_ST=m +CONFIG_DM_DELAY=m +CONFIG_DM_UEVENT=y +CONFIG_DM_FLAKEY=m +CONFIG_DM_VERITY=m +CONFIG_DM_SWITCH=m +CONFIG_NETDEVICES=y +CONFIG_BONDING=m +CONFIG_DUMMY=m +CONFIG_EQUALIZER=m +CONFIG_IFB=m +CONFIG_MACVLAN=m +CONFIG_MACVTAP=m +CONFIG_VXLAN=m +CONFIG_TUN=m +CONFIG_VETH=m +CONFIG_VIRTIO_NET=m +CONFIG_NLMON=m +CONFIG_VHOST_NET=m +# CONFIG_NET_VENDOR_ARC is not set +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_CHELSIO is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +CONFIG_MLX4_EN=m +# CONFIG_NET_VENDOR_NATSEMI is not set +CONFIG_PPP=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_MPPE=m +CONFIG_PPPOE=m +CONFIG_PPTP=m +CONFIG_PPPOL2TP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_SERIO is not set +CONFIG_DEVPTS_MULTIPLE_INSTANCES=y +CONFIG_LEGACY_PTY_COUNT=0 +CONFIG_HW_RANDOM_VIRTIO=m +CONFIG_RAW_DRIVER=m +CONFIG_HANGCHECK_TIMER=m +CONFIG_TN3270_FS=y +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y +CONFIG_SOFT_WATCHDOG=m +CONFIG_ZVM_WATCHDOG=m +# CONFIG_HID is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_INFINIBAND=m +CONFIG_INFINIBAND_USER_ACCESS=m +CONFIG_MLX4_INFINIBAND=m +CONFIG_VIRTIO_BALLOON=m +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +CONFIG_EXT2_FS_XIP=y +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +CONFIG_EXT4_FS=y +CONFIG_EXT4_FS_POSIX_ACL=y +CONFIG_EXT4_FS_SECURITY=y +CONFIG_JBD_DEBUG=y +CONFIG_JBD2_DEBUG=y +CONFIG_JFS_FS=m +CONFIG_JFS_POSIX_ACL=y +CONFIG_JFS_SECURITY=y +CONFIG_JFS_STATISTICS=y +CONFIG_XFS_FS=m +CONFIG_XFS_QUOTA=y +CONFIG_XFS_POSIX_ACL=y +CONFIG_XFS_RT=y +CONFIG_XFS_DEBUG=y +CONFIG_GFS2_FS=m +CONFIG_OCFS2_FS=m +CONFIG_BTRFS_FS=m +CONFIG_BTRFS_FS_POSIX_ACL=y +CONFIG_NILFS2_FS=m +CONFIG_FANOTIFY=y +CONFIG_QUOTA_NETLINK_INTERFACE=y +CONFIG_QFMT_V1=m +CONFIG_QFMT_V2=m +CONFIG_AUTOFS4_FS=m +CONFIG_FUSE_FS=m +CONFIG_CUSE=m +CONFIG_FSCACHE=m +CONFIG_CACHEFILES=m +CONFIG_ISO9660_FS=y +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_NTFS_FS=m +CONFIG_NTFS_RW=y +CONFIG_PROC_KCORE=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_HUGETLBFS=y +CONFIG_CONFIGFS_FS=m +CONFIG_ECRYPT_FS=m +CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +CONFIG_SQUASHFS_XATTR=y +CONFIG_SQUASHFS_LZO=y +CONFIG_SQUASHFS_XZ=y +CONFIG_ROMFS_FS=m +CONFIG_NFS_FS=m +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=m +CONFIG_NFS_SWAP=y +CONFIG_NFSD=m +CONFIG_NFSD_V3_ACL=y +CONFIG_NFSD_V4=y +CONFIG_NFSD_V4_SECURITY_LABEL=y +CONFIG_CIFS=m +CONFIG_CIFS_STATS=y +CONFIG_CIFS_STATS2=y +CONFIG_CIFS_WEAK_PW_HASH=y +CONFIG_CIFS_UPCALL=y +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +# CONFIG_CIFS_DEBUG is not set +CONFIG_CIFS_DFS_UPCALL=y +CONFIG_NLS_DEFAULT="utf8" +CONFIG_NLS_CODEPAGE_437=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_UTF8=m +CONFIG_DLM=m +CONFIG_PRINTK_TIME=y +CONFIG_DYNAMIC_DEBUG=y +CONFIG_DEBUG_INFO=y +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 +CONFIG_READABLE_ASM=y +CONFIG_UNUSED_SYMBOLS=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y +CONFIG_DEBUG_PAGEALLOC=y +CONFIG_SLUB_DEBUG_ON=y +CONFIG_SLUB_STATS=y +CONFIG_DEBUG_STACK_USAGE=y +CONFIG_DEBUG_VM=y +CONFIG_DEBUG_VM_RB=y +CONFIG_MEMORY_NOTIFIER_ERROR_INJECT=m +CONFIG_DEBUG_PER_CPU_MAPS=y +CONFIG_TIMER_STATS=y +CONFIG_DEBUG_RT_MUTEXES=y +CONFIG_RT_MUTEX_TESTER=y +CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y +CONFIG_PROVE_LOCKING=y +CONFIG_LOCK_STAT=y +CONFIG_DEBUG_LOCKDEP=y +CONFIG_DEBUG_ATOMIC_SLEEP=y +CONFIG_DEBUG_LOCKING_API_SELFTESTS=y +CONFIG_DEBUG_WRITECOUNT=y +CONFIG_DEBUG_LIST=y +CONFIG_DEBUG_SG=y +CONFIG_DEBUG_NOTIFIERS=y +CONFIG_DEBUG_CREDENTIALS=y +CONFIG_PROVE_RCU=y +CONFIG_RCU_TORTURE_TEST=m +CONFIG_RCU_CPU_STALL_TIMEOUT=300 +CONFIG_NOTIFIER_ERROR_INJECTION=m +CONFIG_CPU_NOTIFIER_ERROR_INJECT=m +CONFIG_PM_NOTIFIER_ERROR_INJECT=m +CONFIG_FAULT_INJECTION=y +CONFIG_FAILSLAB=y +CONFIG_FAIL_PAGE_ALLOC=y +CONFIG_FAIL_MAKE_REQUEST=y +CONFIG_FAIL_IO_TIMEOUT=y +CONFIG_FAULT_INJECTION_DEBUG_FS=y +CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y +CONFIG_LATENCYTOP=y +CONFIG_DEBUG_STRICT_USER_COPY_CHECKS=y +CONFIG_BLK_DEV_IO_TRACE=y +# CONFIG_KPROBE_EVENT is not set +CONFIG_LKDTM=m +CONFIG_KPROBES_SANITY_TEST=y +CONFIG_RBTREE_TEST=m +CONFIG_INTERVAL_TREE_TEST=m +CONFIG_ATOMIC64_SELFTEST=y +CONFIG_DMA_API_DEBUG=y +# CONFIG_STRICT_DEVMEM is not set +CONFIG_S390_PTDUMP=y +CONFIG_ENCRYPTED_KEYS=m +CONFIG_KEYS_DEBUG_PROC_KEYS=y +CONFIG_SECURITY=y +CONFIG_SECURITY_NETWORK=y +CONFIG_SECURITY_SELINUX=y +CONFIG_SECURITY_SELINUX_BOOTPARAM=y +CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0 +CONFIG_SECURITY_SELINUX_DISABLE=y +CONFIG_IMA=y +CONFIG_IMA_APPRAISE=y +CONFIG_CRYPTO_USER=m +# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set +CONFIG_CRYPTO_CRYPTD=m +CONFIG_CRYPTO_TEST=m +CONFIG_CRYPTO_CCM=m +CONFIG_CRYPTO_GCM=m +CONFIG_CRYPTO_CTS=m +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_XTS=m +CONFIG_CRYPTO_XCBC=m +CONFIG_CRYPTO_VMAC=m +CONFIG_CRYPTO_CRC32=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_RMD128=m +CONFIG_CRYPTO_RMD160=m +CONFIG_CRYPTO_RMD256=m +CONFIG_CRYPTO_RMD320=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_CAMELLIA=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_FCRYPT=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_SALSA20=m +CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_ZLIB=y +CONFIG_CRYPTO_LZO=m +CONFIG_CRYPTO_LZ4=m +CONFIG_CRYPTO_LZ4HC=m +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m +CONFIG_ZCRYPT=m +CONFIG_CRYPTO_SHA1_S390=m +CONFIG_CRYPTO_SHA256_S390=m +CONFIG_CRYPTO_SHA512_S390=m +CONFIG_CRYPTO_DES_S390=m +CONFIG_CRYPTO_AES_S390=m +CONFIG_CRYPTO_GHASH_S390=m +CONFIG_ASYMMETRIC_KEY_TYPE=m +CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=m +CONFIG_PUBLIC_KEY_ALGO_RSA=m +CONFIG_X509_CERTIFICATE_PARSER=m +CONFIG_CRC7=m +CONFIG_CRC8=m +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_CORDIC=m +CONFIG_CMM=m +CONFIG_APPLDATA_BASE=y +CONFIG_KVM=m +CONFIG_KVM_S390_UCONTROL=y diff --git a/arch/s390/configs/gcov_defconfig b/arch/s390/configs/gcov_defconfig new file mode 100644 index 00000000000..b9f6b4cab92 --- /dev/null +++ b/arch/s390/configs/gcov_defconfig @@ -0,0 +1,618 @@ +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y +CONFIG_AUDIT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_TASKSTATS=y +CONFIG_TASK_DELAY_ACCT=y +CONFIG_TASK_XACCT=y +CONFIG_TASK_IO_ACCOUNTING=y +CONFIG_RCU_FAST_NO_HZ=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_CGROUP_FREEZER=y +CONFIG_CGROUP_DEVICE=y +CONFIG_CPUSETS=y +CONFIG_CGROUP_CPUACCT=y +CONFIG_RESOURCE_COUNTERS=y +CONFIG_CGROUP_PERF=y +CONFIG_BLK_CGROUP=y +CONFIG_SCHED_AUTOGROUP=y +CONFIG_BLK_DEV_INITRD=y +# CONFIG_COMPAT_BRK is not set +CONFIG_PROFILING=y +CONFIG_OPROFILE=m +CONFIG_KPROBES=y +CONFIG_JUMP_LABEL=y +CONFIG_GCOV_KERNEL=y +CONFIG_GCOV_PROFILE_ALL=y +CONFIG_MODULES=y +CONFIG_MODULE_FORCE_LOAD=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_BLK_DEV_INTEGRITY=y +CONFIG_BLK_DEV_THROTTLING=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_IBM_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +CONFIG_CFQ_GROUP_IOSCHED=y +CONFIG_DEFAULT_DEADLINE=y +CONFIG_MARCH_Z9_109=y +CONFIG_HZ_100=y +CONFIG_MEMORY_HOTPLUG=y +CONFIG_MEMORY_HOTREMOVE=y +CONFIG_KSM=y +CONFIG_TRANSPARENT_HUGEPAGE=y +CONFIG_PCI=y +CONFIG_HOTPLUG_PCI=y +CONFIG_HOTPLUG_PCI_S390=y +CONFIG_CHSC_SCH=y +CONFIG_CRASH_DUMP=y +CONFIG_ZFCPDUMP=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_BINFMT_MISC=m +CONFIG_HIBERNATION=y +CONFIG_PACKET=y +CONFIG_PACKET_DIAG=m +CONFIG_UNIX=y +CONFIG_UNIX_DIAG=m +CONFIG_XFRM_USER=m +CONFIG_NET_KEY=m +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE_DEMUX=m +CONFIG_NET_IPGRE=m +CONFIG_NET_IPGRE_BROADCAST=y +CONFIG_IP_MROUTE=y +CONFIG_IP_MROUTE_MULTIPLE_TABLES=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y +CONFIG_SYN_COOKIES=y +CONFIG_NET_IPVTI=m +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_MODE_TRANSPORT=m +CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m +CONFIG_INET_DIAG=m +CONFIG_INET_UDP_DIAG=m +CONFIG_TCP_CONG_ADVANCED=y +CONFIG_TCP_CONG_HSTCP=m +CONFIG_TCP_CONG_HYBLA=m +CONFIG_TCP_CONG_SCALABLE=m +CONFIG_TCP_CONG_LP=m +CONFIG_TCP_CONG_VENO=m +CONFIG_TCP_CONG_YEAH=m +CONFIG_TCP_CONG_ILLINOIS=m +CONFIG_IPV6=y +CONFIG_IPV6_PRIVACY=y +CONFIG_IPV6_ROUTER_PREF=y +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_IPV6_MIP6=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m +CONFIG_IPV6_SIT=m +CONFIG_IPV6_GRE=m +CONFIG_IPV6_MULTIPLE_TABLES=y +CONFIG_IPV6_SUBTREES=y +CONFIG_NETFILTER=y +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_SECMARK=y +CONFIG_NF_CONNTRACK_EVENTS=y +CONFIG_NF_CONNTRACK_TIMEOUT=y +CONFIG_NF_CONNTRACK_TIMESTAMP=y +CONFIG_NF_CT_PROTO_DCCP=m +CONFIG_NF_CT_PROTO_UDPLITE=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_SNMP=m +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NF_CT_NETLINK=m +CONFIG_NF_CT_NETLINK_TIMEOUT=m +CONFIG_NETFILTER_TPROXY=m +CONFIG_NETFILTER_XT_SET=m +CONFIG_NETFILTER_XT_TARGET_AUDIT=m +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m +CONFIG_NETFILTER_XT_TARGET_CT=m +CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HMARK=m +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m +CONFIG_NETFILTER_XT_TARGET_LOG=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_TEE=m +CONFIG_NETFILTER_XT_TARGET_TPROXY=m +CONFIG_NETFILTER_XT_TARGET_TRACE=m +CONFIG_NETFILTER_XT_TARGET_SECMARK=m +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +CONFIG_NETFILTER_XT_MATCH_BPF=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m +CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_CPU=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_IPRANGE=m +CONFIG_NETFILTER_XT_MATCH_IPVS=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_NFACCT=m +CONFIG_NETFILTER_XT_MATCH_OSF=m +CONFIG_NETFILTER_XT_MATCH_OWNER=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_QUOTA=m +CONFIG_NETFILTER_XT_MATCH_RATEEST=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_RECENT=m +CONFIG_NETFILTER_XT_MATCH_SOCKET=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STATISTIC=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_TIME=m +CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_SET=m +CONFIG_IP_SET_BITMAP_IP=m +CONFIG_IP_SET_BITMAP_IPMAC=m +CONFIG_IP_SET_BITMAP_PORT=m +CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPPORT=m +CONFIG_IP_SET_HASH_IPPORTIP=m +CONFIG_IP_SET_HASH_IPPORTNET=m +CONFIG_IP_SET_HASH_NET=m +CONFIG_IP_SET_HASH_NETPORT=m +CONFIG_IP_SET_HASH_NETIFACE=m +CONFIG_IP_SET_LIST_SET=m +CONFIG_IP_VS=m +CONFIG_IP_VS_PROTO_TCP=y +CONFIG_IP_VS_PROTO_UDP=y +CONFIG_IP_VS_PROTO_ESP=y +CONFIG_IP_VS_PROTO_AH=y +CONFIG_IP_VS_RR=m +CONFIG_IP_VS_WRR=m +CONFIG_IP_VS_LC=m +CONFIG_IP_VS_WLC=m +CONFIG_IP_VS_LBLC=m +CONFIG_IP_VS_LBLCR=m +CONFIG_IP_VS_DH=m +CONFIG_IP_VS_SH=m +CONFIG_IP_VS_SED=m +CONFIG_IP_VS_NQ=m +CONFIG_IP_VS_FTP=m +CONFIG_IP_VS_PE_SIP=m +CONFIG_NF_CONNTRACK_IPV4=m +# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_RPFILTER=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_NF_NAT_IPV4=m +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_SECURITY=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m +CONFIG_NF_CONNTRACK_IPV6=m +CONFIG_IP6_NF_IPTABLES=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_EUI64=m +CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_HL=m +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RPFILTER=m +CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_MANGLE=m +CONFIG_IP6_NF_RAW=m +CONFIG_IP6_NF_SECURITY=m +CONFIG_NF_NAT_IPV6=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +CONFIG_IP6_NF_TARGET_NPT=m +CONFIG_NET_SCTPPROBE=m +CONFIG_RDS=m +CONFIG_RDS_RDMA=m +CONFIG_RDS_TCP=m +CONFIG_L2TP=m +CONFIG_L2TP_DEBUGFS=m +CONFIG_L2TP_V3=y +CONFIG_L2TP_IP=m +CONFIG_L2TP_ETH=m +CONFIG_BRIDGE=m +CONFIG_VLAN_8021Q=m +CONFIG_VLAN_8021Q_GVRP=y +CONFIG_NET_SCHED=y +CONFIG_NET_SCH_CBQ=m +CONFIG_NET_SCH_HTB=m +CONFIG_NET_SCH_HFSC=m +CONFIG_NET_SCH_PRIO=m +CONFIG_NET_SCH_MULTIQ=m +CONFIG_NET_SCH_RED=m +CONFIG_NET_SCH_SFB=m +CONFIG_NET_SCH_SFQ=m +CONFIG_NET_SCH_TEQL=m +CONFIG_NET_SCH_TBF=m +CONFIG_NET_SCH_GRED=m +CONFIG_NET_SCH_DSMARK=m +CONFIG_NET_SCH_NETEM=m +CONFIG_NET_SCH_DRR=m +CONFIG_NET_SCH_MQPRIO=m +CONFIG_NET_SCH_CHOKE=m +CONFIG_NET_SCH_QFQ=m +CONFIG_NET_SCH_CODEL=m +CONFIG_NET_SCH_FQ_CODEL=m +CONFIG_NET_SCH_INGRESS=m +CONFIG_NET_SCH_PLUG=m +CONFIG_NET_CLS_BASIC=m +CONFIG_NET_CLS_TCINDEX=m +CONFIG_NET_CLS_ROUTE4=m +CONFIG_NET_CLS_FW=m +CONFIG_NET_CLS_U32=m +CONFIG_CLS_U32_PERF=y +CONFIG_CLS_U32_MARK=y +CONFIG_NET_CLS_RSVP=m +CONFIG_NET_CLS_RSVP6=m +CONFIG_NET_CLS_FLOW=m +CONFIG_NET_CLS_CGROUP=y +CONFIG_NET_CLS_ACT=y +CONFIG_NET_ACT_POLICE=m +CONFIG_NET_ACT_GACT=m +CONFIG_GACT_PROB=y +CONFIG_NET_ACT_MIRRED=m +CONFIG_NET_ACT_IPT=m +CONFIG_NET_ACT_NAT=m +CONFIG_NET_ACT_PEDIT=m +CONFIG_NET_ACT_SIMP=m +CONFIG_NET_ACT_SKBEDIT=m +CONFIG_NET_ACT_CSUM=m +CONFIG_DNS_RESOLVER=y +CONFIG_BPF_JIT=y +CONFIG_NET_PKTGEN=m +CONFIG_NET_TCPPROBE=m +CONFIG_DEVTMPFS=y +CONFIG_CONNECTOR=y +CONFIG_BLK_DEV_LOOP=m +CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_NBD=m +CONFIG_BLK_DEV_OSD=m +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=32768 +CONFIG_BLK_DEV_XIP=y +CONFIG_CDROM_PKTCDVD=m +CONFIG_ATA_OVER_ETH=m +CONFIG_VIRTIO_BLK=y +CONFIG_ENCLOSURE_SERVICES=m +CONFIG_RAID_ATTRS=m +CONFIG_SCSI=y +CONFIG_SCSI_TGT=m +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=m +CONFIG_CHR_DEV_OSST=m +CONFIG_BLK_DEV_SR=m +CONFIG_CHR_DEV_SG=y +CONFIG_CHR_DEV_SCH=m +CONFIG_SCSI_ENCLOSURE=m +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_CONSTANTS=y +CONFIG_SCSI_LOGGING=y +CONFIG_SCSI_SPI_ATTRS=m +CONFIG_SCSI_SAS_LIBSAS=m +CONFIG_SCSI_SRP_ATTRS=m +CONFIG_SCSI_SRP_TGT_ATTRS=y +CONFIG_ISCSI_TCP=m +CONFIG_LIBFCOE=m +CONFIG_SCSI_DEBUG=m +CONFIG_ZFCP=y +CONFIG_SCSI_VIRTIO=m +CONFIG_SCSI_DH=m +CONFIG_SCSI_DH_RDAC=m +CONFIG_SCSI_DH_HP_SW=m +CONFIG_SCSI_DH_EMC=m +CONFIG_SCSI_DH_ALUA=m +CONFIG_SCSI_OSD_INITIATOR=m +CONFIG_SCSI_OSD_ULD=m +CONFIG_MD=y +CONFIG_BLK_DEV_MD=y +CONFIG_MD_LINEAR=m +CONFIG_MD_RAID0=m +CONFIG_MD_MULTIPATH=m +CONFIG_MD_FAULTY=m +CONFIG_BLK_DEV_DM=m +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=m +CONFIG_DM_RAID=m +CONFIG_DM_LOG_USERSPACE=m +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_QL=m +CONFIG_DM_MULTIPATH_ST=m +CONFIG_DM_DELAY=m +CONFIG_DM_UEVENT=y +CONFIG_DM_FLAKEY=m +CONFIG_DM_VERITY=m +CONFIG_DM_SWITCH=m +CONFIG_NETDEVICES=y +CONFIG_BONDING=m +CONFIG_DUMMY=m +CONFIG_EQUALIZER=m +CONFIG_IFB=m +CONFIG_MACVLAN=m +CONFIG_MACVTAP=m +CONFIG_VXLAN=m +CONFIG_TUN=m +CONFIG_VETH=m +CONFIG_VIRTIO_NET=m +CONFIG_NLMON=m +CONFIG_VHOST_NET=m +# CONFIG_NET_VENDOR_ARC is not set +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_CHELSIO is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +CONFIG_MLX4_EN=m +# CONFIG_NET_VENDOR_NATSEMI is not set +CONFIG_PPP=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_MPPE=m +CONFIG_PPPOE=m +CONFIG_PPTP=m +CONFIG_PPPOL2TP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_SERIO is not set +CONFIG_DEVPTS_MULTIPLE_INSTANCES=y +CONFIG_LEGACY_PTY_COUNT=0 +CONFIG_HW_RANDOM_VIRTIO=m +CONFIG_RAW_DRIVER=m +CONFIG_HANGCHECK_TIMER=m +CONFIG_TN3270_FS=y +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y +CONFIG_SOFT_WATCHDOG=m +CONFIG_ZVM_WATCHDOG=m +# CONFIG_HID is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_INFINIBAND=m +CONFIG_INFINIBAND_USER_ACCESS=m +CONFIG_MLX4_INFINIBAND=m +CONFIG_VIRTIO_BALLOON=m +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +CONFIG_EXT2_FS_XIP=y +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +CONFIG_EXT4_FS=y +CONFIG_EXT4_FS_POSIX_ACL=y +CONFIG_EXT4_FS_SECURITY=y +CONFIG_JBD_DEBUG=y +CONFIG_JBD2_DEBUG=y +CONFIG_JFS_FS=m +CONFIG_JFS_POSIX_ACL=y +CONFIG_JFS_SECURITY=y +CONFIG_JFS_STATISTICS=y +CONFIG_XFS_FS=m +CONFIG_XFS_QUOTA=y +CONFIG_XFS_POSIX_ACL=y +CONFIG_XFS_RT=y +CONFIG_GFS2_FS=m +CONFIG_OCFS2_FS=m +CONFIG_BTRFS_FS=m +CONFIG_BTRFS_FS_POSIX_ACL=y +CONFIG_NILFS2_FS=m +CONFIG_FANOTIFY=y +CONFIG_QUOTA_NETLINK_INTERFACE=y +CONFIG_QFMT_V1=m +CONFIG_QFMT_V2=m +CONFIG_AUTOFS4_FS=m +CONFIG_FUSE_FS=m +CONFIG_CUSE=m +CONFIG_FSCACHE=m +CONFIG_CACHEFILES=m +CONFIG_ISO9660_FS=y +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_NTFS_FS=m +CONFIG_NTFS_RW=y +CONFIG_PROC_KCORE=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_HUGETLBFS=y +CONFIG_CONFIGFS_FS=m +CONFIG_ECRYPT_FS=m +CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +CONFIG_SQUASHFS_XATTR=y +CONFIG_SQUASHFS_LZO=y +CONFIG_SQUASHFS_XZ=y +CONFIG_ROMFS_FS=m +CONFIG_NFS_FS=m +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=m +CONFIG_NFS_SWAP=y +CONFIG_NFSD=m +CONFIG_NFSD_V3_ACL=y +CONFIG_NFSD_V4=y +CONFIG_NFSD_V4_SECURITY_LABEL=y +CONFIG_CIFS=m +CONFIG_CIFS_STATS=y +CONFIG_CIFS_STATS2=y +CONFIG_CIFS_WEAK_PW_HASH=y +CONFIG_CIFS_UPCALL=y +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +# CONFIG_CIFS_DEBUG is not set +CONFIG_CIFS_DFS_UPCALL=y +CONFIG_NLS_DEFAULT="utf8" +CONFIG_NLS_CODEPAGE_437=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_UTF8=m +CONFIG_DLM=m +CONFIG_PRINTK_TIME=y +CONFIG_DEBUG_INFO=y +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 +CONFIG_UNUSED_SYMBOLS=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y +CONFIG_MEMORY_NOTIFIER_ERROR_INJECT=m +CONFIG_TIMER_STATS=y +CONFIG_RCU_TORTURE_TEST=m +CONFIG_RCU_CPU_STALL_TIMEOUT=60 +CONFIG_NOTIFIER_ERROR_INJECTION=m +CONFIG_CPU_NOTIFIER_ERROR_INJECT=m +CONFIG_PM_NOTIFIER_ERROR_INJECT=m +CONFIG_LATENCYTOP=y +CONFIG_BLK_DEV_IO_TRACE=y +# CONFIG_KPROBE_EVENT is not set +CONFIG_LKDTM=m +CONFIG_RBTREE_TEST=m +CONFIG_INTERVAL_TREE_TEST=m +CONFIG_ATOMIC64_SELFTEST=y +# CONFIG_STRICT_DEVMEM is not set +CONFIG_S390_PTDUMP=y +CONFIG_ENCRYPTED_KEYS=m +CONFIG_KEYS_DEBUG_PROC_KEYS=y +CONFIG_SECURITY=y +CONFIG_SECURITY_NETWORK=y +CONFIG_SECURITY_SELINUX=y +CONFIG_SECURITY_SELINUX_BOOTPARAM=y +CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0 +CONFIG_SECURITY_SELINUX_DISABLE=y +CONFIG_IMA=y +CONFIG_IMA_APPRAISE=y +CONFIG_CRYPTO_USER=m +# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set +CONFIG_CRYPTO_CRYPTD=m +CONFIG_CRYPTO_TEST=m +CONFIG_CRYPTO_CCM=m +CONFIG_CRYPTO_GCM=m +CONFIG_CRYPTO_CTS=m +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_XTS=m +CONFIG_CRYPTO_XCBC=m +CONFIG_CRYPTO_VMAC=m +CONFIG_CRYPTO_CRC32=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_RMD128=m +CONFIG_CRYPTO_RMD160=m +CONFIG_CRYPTO_RMD256=m +CONFIG_CRYPTO_RMD320=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_CAMELLIA=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_FCRYPT=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_SALSA20=m +CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_ZLIB=y +CONFIG_CRYPTO_LZO=m +CONFIG_CRYPTO_LZ4=m +CONFIG_CRYPTO_LZ4HC=m +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m +CONFIG_ZCRYPT=m +CONFIG_CRYPTO_SHA1_S390=m +CONFIG_CRYPTO_SHA256_S390=m +CONFIG_CRYPTO_SHA512_S390=m +CONFIG_CRYPTO_DES_S390=m +CONFIG_CRYPTO_AES_S390=m +CONFIG_CRYPTO_GHASH_S390=m +CONFIG_ASYMMETRIC_KEY_TYPE=m +CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=m +CONFIG_PUBLIC_KEY_ALGO_RSA=m +CONFIG_X509_CERTIFICATE_PARSER=m +CONFIG_CRC7=m +CONFIG_CRC8=m +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_CORDIC=m +CONFIG_CMM=m +CONFIG_APPLDATA_BASE=y +CONFIG_KVM=m +CONFIG_KVM_S390_UCONTROL=y diff --git a/arch/s390/configs/performance_defconfig b/arch/s390/configs/performance_defconfig new file mode 100644 index 00000000000..91087b43e8f --- /dev/null +++ b/arch/s390/configs/performance_defconfig @@ -0,0 +1,610 @@ +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y +CONFIG_AUDIT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_TASKSTATS=y +CONFIG_TASK_DELAY_ACCT=y +CONFIG_TASK_XACCT=y +CONFIG_TASK_IO_ACCOUNTING=y +CONFIG_RCU_FAST_NO_HZ=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_CGROUP_FREEZER=y +CONFIG_CGROUP_DEVICE=y +CONFIG_CPUSETS=y +CONFIG_CGROUP_CPUACCT=y +CONFIG_RESOURCE_COUNTERS=y +CONFIG_CGROUP_PERF=y +CONFIG_BLK_CGROUP=y +CONFIG_SCHED_AUTOGROUP=y +CONFIG_BLK_DEV_INITRD=y +# CONFIG_COMPAT_BRK is not set +CONFIG_PROFILING=y +CONFIG_OPROFILE=m +CONFIG_KPROBES=y +CONFIG_JUMP_LABEL=y +CONFIG_MODULES=y +CONFIG_MODULE_FORCE_LOAD=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_BLK_DEV_INTEGRITY=y +CONFIG_BLK_DEV_THROTTLING=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_IBM_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +CONFIG_CFQ_GROUP_IOSCHED=y +CONFIG_DEFAULT_DEADLINE=y +CONFIG_MARCH_Z9_109=y +CONFIG_HZ_100=y +CONFIG_MEMORY_HOTPLUG=y +CONFIG_MEMORY_HOTREMOVE=y +CONFIG_KSM=y +CONFIG_TRANSPARENT_HUGEPAGE=y +CONFIG_PCI=y +CONFIG_HOTPLUG_PCI=y +CONFIG_HOTPLUG_PCI_S390=y +CONFIG_CHSC_SCH=y +CONFIG_CRASH_DUMP=y +CONFIG_ZFCPDUMP=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_BINFMT_MISC=m +CONFIG_HIBERNATION=y +CONFIG_PACKET=y +CONFIG_PACKET_DIAG=m +CONFIG_UNIX=y +CONFIG_UNIX_DIAG=m +CONFIG_XFRM_USER=m +CONFIG_NET_KEY=m +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE_DEMUX=m +CONFIG_NET_IPGRE=m +CONFIG_NET_IPGRE_BROADCAST=y +CONFIG_IP_MROUTE=y +CONFIG_IP_MROUTE_MULTIPLE_TABLES=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y +CONFIG_SYN_COOKIES=y +CONFIG_NET_IPVTI=m +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_MODE_TRANSPORT=m +CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m +CONFIG_INET_DIAG=m +CONFIG_INET_UDP_DIAG=m +CONFIG_TCP_CONG_ADVANCED=y +CONFIG_TCP_CONG_HSTCP=m +CONFIG_TCP_CONG_HYBLA=m +CONFIG_TCP_CONG_SCALABLE=m +CONFIG_TCP_CONG_LP=m +CONFIG_TCP_CONG_VENO=m +CONFIG_TCP_CONG_YEAH=m +CONFIG_TCP_CONG_ILLINOIS=m +CONFIG_IPV6=y +CONFIG_IPV6_PRIVACY=y +CONFIG_IPV6_ROUTER_PREF=y +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_IPV6_MIP6=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m +CONFIG_IPV6_SIT=m +CONFIG_IPV6_GRE=m +CONFIG_IPV6_MULTIPLE_TABLES=y +CONFIG_IPV6_SUBTREES=y +CONFIG_NETFILTER=y +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_SECMARK=y +CONFIG_NF_CONNTRACK_EVENTS=y +CONFIG_NF_CONNTRACK_TIMEOUT=y +CONFIG_NF_CONNTRACK_TIMESTAMP=y +CONFIG_NF_CT_PROTO_DCCP=m +CONFIG_NF_CT_PROTO_UDPLITE=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_SNMP=m +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NF_CT_NETLINK=m +CONFIG_NF_CT_NETLINK_TIMEOUT=m +CONFIG_NETFILTER_TPROXY=m +CONFIG_NETFILTER_XT_SET=m +CONFIG_NETFILTER_XT_TARGET_AUDIT=m +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m +CONFIG_NETFILTER_XT_TARGET_CT=m +CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HMARK=m +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m +CONFIG_NETFILTER_XT_TARGET_LOG=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_TEE=m +CONFIG_NETFILTER_XT_TARGET_TPROXY=m +CONFIG_NETFILTER_XT_TARGET_TRACE=m +CONFIG_NETFILTER_XT_TARGET_SECMARK=m +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +CONFIG_NETFILTER_XT_MATCH_BPF=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m +CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_CPU=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_IPRANGE=m +CONFIG_NETFILTER_XT_MATCH_IPVS=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_NFACCT=m +CONFIG_NETFILTER_XT_MATCH_OSF=m +CONFIG_NETFILTER_XT_MATCH_OWNER=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_QUOTA=m +CONFIG_NETFILTER_XT_MATCH_RATEEST=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_RECENT=m +CONFIG_NETFILTER_XT_MATCH_SOCKET=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STATISTIC=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_TIME=m +CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_SET=m +CONFIG_IP_SET_BITMAP_IP=m +CONFIG_IP_SET_BITMAP_IPMAC=m +CONFIG_IP_SET_BITMAP_PORT=m +CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPPORT=m +CONFIG_IP_SET_HASH_IPPORTIP=m +CONFIG_IP_SET_HASH_IPPORTNET=m +CONFIG_IP_SET_HASH_NET=m +CONFIG_IP_SET_HASH_NETPORT=m +CONFIG_IP_SET_HASH_NETIFACE=m +CONFIG_IP_SET_LIST_SET=m +CONFIG_IP_VS=m +CONFIG_IP_VS_PROTO_TCP=y +CONFIG_IP_VS_PROTO_UDP=y +CONFIG_IP_VS_PROTO_ESP=y +CONFIG_IP_VS_PROTO_AH=y +CONFIG_IP_VS_RR=m +CONFIG_IP_VS_WRR=m +CONFIG_IP_VS_LC=m +CONFIG_IP_VS_WLC=m +CONFIG_IP_VS_LBLC=m +CONFIG_IP_VS_LBLCR=m +CONFIG_IP_VS_DH=m +CONFIG_IP_VS_SH=m +CONFIG_IP_VS_SED=m +CONFIG_IP_VS_NQ=m +CONFIG_IP_VS_FTP=m +CONFIG_IP_VS_PE_SIP=m +CONFIG_NF_CONNTRACK_IPV4=m +# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_RPFILTER=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_NF_NAT_IPV4=m +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_SECURITY=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m +CONFIG_NF_CONNTRACK_IPV6=m +CONFIG_IP6_NF_IPTABLES=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_EUI64=m +CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_HL=m +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RPFILTER=m +CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_MANGLE=m +CONFIG_IP6_NF_RAW=m +CONFIG_IP6_NF_SECURITY=m +CONFIG_NF_NAT_IPV6=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +CONFIG_IP6_NF_TARGET_NPT=m +CONFIG_NET_SCTPPROBE=m +CONFIG_RDS=m +CONFIG_RDS_RDMA=m +CONFIG_RDS_TCP=m +CONFIG_L2TP=m +CONFIG_L2TP_DEBUGFS=m +CONFIG_L2TP_V3=y +CONFIG_L2TP_IP=m +CONFIG_L2TP_ETH=m +CONFIG_BRIDGE=m +CONFIG_VLAN_8021Q=m +CONFIG_VLAN_8021Q_GVRP=y +CONFIG_NET_SCHED=y +CONFIG_NET_SCH_CBQ=m +CONFIG_NET_SCH_HTB=m +CONFIG_NET_SCH_HFSC=m +CONFIG_NET_SCH_PRIO=m +CONFIG_NET_SCH_MULTIQ=m +CONFIG_NET_SCH_RED=m +CONFIG_NET_SCH_SFB=m +CONFIG_NET_SCH_SFQ=m +CONFIG_NET_SCH_TEQL=m +CONFIG_NET_SCH_TBF=m +CONFIG_NET_SCH_GRED=m +CONFIG_NET_SCH_DSMARK=m +CONFIG_NET_SCH_NETEM=m +CONFIG_NET_SCH_DRR=m +CONFIG_NET_SCH_MQPRIO=m +CONFIG_NET_SCH_CHOKE=m +CONFIG_NET_SCH_QFQ=m +CONFIG_NET_SCH_CODEL=m +CONFIG_NET_SCH_FQ_CODEL=m +CONFIG_NET_SCH_INGRESS=m +CONFIG_NET_SCH_PLUG=m +CONFIG_NET_CLS_BASIC=m +CONFIG_NET_CLS_TCINDEX=m +CONFIG_NET_CLS_ROUTE4=m +CONFIG_NET_CLS_FW=m +CONFIG_NET_CLS_U32=m +CONFIG_CLS_U32_PERF=y +CONFIG_CLS_U32_MARK=y +CONFIG_NET_CLS_RSVP=m +CONFIG_NET_CLS_RSVP6=m +CONFIG_NET_CLS_FLOW=m +CONFIG_NET_CLS_CGROUP=y +CONFIG_NET_CLS_ACT=y +CONFIG_NET_ACT_POLICE=m +CONFIG_NET_ACT_GACT=m +CONFIG_GACT_PROB=y +CONFIG_NET_ACT_MIRRED=m +CONFIG_NET_ACT_IPT=m +CONFIG_NET_ACT_NAT=m +CONFIG_NET_ACT_PEDIT=m +CONFIG_NET_ACT_SIMP=m +CONFIG_NET_ACT_SKBEDIT=m +CONFIG_NET_ACT_CSUM=m +CONFIG_DNS_RESOLVER=y +CONFIG_BPF_JIT=y +CONFIG_NET_PKTGEN=m +CONFIG_NET_TCPPROBE=m +CONFIG_DEVTMPFS=y +CONFIG_CONNECTOR=y +CONFIG_BLK_DEV_LOOP=m +CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_NBD=m +CONFIG_BLK_DEV_OSD=m +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=32768 +CONFIG_BLK_DEV_XIP=y +CONFIG_CDROM_PKTCDVD=m +CONFIG_ATA_OVER_ETH=m +CONFIG_VIRTIO_BLK=y +CONFIG_ENCLOSURE_SERVICES=m +CONFIG_RAID_ATTRS=m +CONFIG_SCSI=y +CONFIG_SCSI_TGT=m +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=m +CONFIG_CHR_DEV_OSST=m +CONFIG_BLK_DEV_SR=m +CONFIG_CHR_DEV_SG=y +CONFIG_CHR_DEV_SCH=m +CONFIG_SCSI_ENCLOSURE=m +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_CONSTANTS=y +CONFIG_SCSI_LOGGING=y +CONFIG_SCSI_SPI_ATTRS=m +CONFIG_SCSI_SAS_LIBSAS=m +CONFIG_SCSI_SRP_ATTRS=m +CONFIG_SCSI_SRP_TGT_ATTRS=y +CONFIG_ISCSI_TCP=m +CONFIG_LIBFCOE=m +CONFIG_SCSI_DEBUG=m +CONFIG_ZFCP=y +CONFIG_SCSI_VIRTIO=m +CONFIG_SCSI_DH=m +CONFIG_SCSI_DH_RDAC=m +CONFIG_SCSI_DH_HP_SW=m +CONFIG_SCSI_DH_EMC=m +CONFIG_SCSI_DH_ALUA=m +CONFIG_SCSI_OSD_INITIATOR=m +CONFIG_SCSI_OSD_ULD=m +CONFIG_MD=y +CONFIG_BLK_DEV_MD=y +CONFIG_MD_LINEAR=m +CONFIG_MD_RAID0=m +CONFIG_MD_MULTIPATH=m +CONFIG_MD_FAULTY=m +CONFIG_BLK_DEV_DM=m +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=m +CONFIG_DM_RAID=m +CONFIG_DM_LOG_USERSPACE=m +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_QL=m +CONFIG_DM_MULTIPATH_ST=m +CONFIG_DM_DELAY=m +CONFIG_DM_UEVENT=y +CONFIG_DM_FLAKEY=m +CONFIG_DM_VERITY=m +CONFIG_DM_SWITCH=m +CONFIG_NETDEVICES=y +CONFIG_BONDING=m +CONFIG_DUMMY=m +CONFIG_EQUALIZER=m +CONFIG_IFB=m +CONFIG_MACVLAN=m +CONFIG_MACVTAP=m +CONFIG_VXLAN=m +CONFIG_TUN=m +CONFIG_VETH=m +CONFIG_VIRTIO_NET=m +CONFIG_NLMON=m +CONFIG_VHOST_NET=m +# CONFIG_NET_VENDOR_ARC is not set +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_CHELSIO is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +CONFIG_MLX4_EN=m +# CONFIG_NET_VENDOR_NATSEMI is not set +CONFIG_PPP=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_MPPE=m +CONFIG_PPPOE=m +CONFIG_PPTP=m +CONFIG_PPPOL2TP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_SERIO is not set +CONFIG_DEVPTS_MULTIPLE_INSTANCES=y +CONFIG_LEGACY_PTY_COUNT=0 +CONFIG_HW_RANDOM_VIRTIO=m +CONFIG_RAW_DRIVER=m +CONFIG_HANGCHECK_TIMER=m +CONFIG_TN3270_FS=y +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y +CONFIG_SOFT_WATCHDOG=m +CONFIG_ZVM_WATCHDOG=m +# CONFIG_HID is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_INFINIBAND=m +CONFIG_INFINIBAND_USER_ACCESS=m +CONFIG_MLX4_INFINIBAND=m +CONFIG_VIRTIO_BALLOON=m +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +CONFIG_EXT2_FS_XIP=y +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +CONFIG_EXT4_FS=y +CONFIG_EXT4_FS_POSIX_ACL=y +CONFIG_EXT4_FS_SECURITY=y +CONFIG_JBD_DEBUG=y +CONFIG_JBD2_DEBUG=y +CONFIG_JFS_FS=m +CONFIG_JFS_POSIX_ACL=y +CONFIG_JFS_SECURITY=y +CONFIG_JFS_STATISTICS=y +CONFIG_XFS_FS=m +CONFIG_XFS_QUOTA=y +CONFIG_XFS_POSIX_ACL=y +CONFIG_XFS_RT=y +CONFIG_GFS2_FS=m +CONFIG_OCFS2_FS=m +CONFIG_BTRFS_FS=m +CONFIG_BTRFS_FS_POSIX_ACL=y +CONFIG_NILFS2_FS=m +CONFIG_FANOTIFY=y +CONFIG_QUOTA_NETLINK_INTERFACE=y +CONFIG_QFMT_V1=m +CONFIG_QFMT_V2=m +CONFIG_AUTOFS4_FS=m +CONFIG_FUSE_FS=m +CONFIG_CUSE=m +CONFIG_FSCACHE=m +CONFIG_CACHEFILES=m +CONFIG_ISO9660_FS=y +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_NTFS_FS=m +CONFIG_NTFS_RW=y +CONFIG_PROC_KCORE=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_HUGETLBFS=y +CONFIG_CONFIGFS_FS=m +CONFIG_ECRYPT_FS=m +CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +CONFIG_SQUASHFS_XATTR=y +CONFIG_SQUASHFS_LZO=y +CONFIG_SQUASHFS_XZ=y +CONFIG_ROMFS_FS=m +CONFIG_NFS_FS=m +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=m +CONFIG_NFS_SWAP=y +CONFIG_NFSD=m +CONFIG_NFSD_V3_ACL=y +CONFIG_NFSD_V4=y +CONFIG_NFSD_V4_SECURITY_LABEL=y +CONFIG_CIFS=m +CONFIG_CIFS_STATS=y +CONFIG_CIFS_STATS2=y +CONFIG_CIFS_WEAK_PW_HASH=y +CONFIG_CIFS_UPCALL=y +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +# CONFIG_CIFS_DEBUG is not set +CONFIG_CIFS_DFS_UPCALL=y +CONFIG_NLS_DEFAULT="utf8" +CONFIG_NLS_CODEPAGE_437=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_UTF8=m +CONFIG_DLM=m +CONFIG_PRINTK_TIME=y +CONFIG_DEBUG_INFO=y +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 +CONFIG_UNUSED_SYMBOLS=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y +CONFIG_TIMER_STATS=y +CONFIG_RCU_TORTURE_TEST=m +CONFIG_RCU_CPU_STALL_TIMEOUT=60 +CONFIG_LATENCYTOP=y +CONFIG_BLK_DEV_IO_TRACE=y +# CONFIG_KPROBE_EVENT is not set +CONFIG_LKDTM=m +CONFIG_ATOMIC64_SELFTEST=y +# CONFIG_STRICT_DEVMEM is not set +CONFIG_S390_PTDUMP=y +CONFIG_ENCRYPTED_KEYS=m +CONFIG_KEYS_DEBUG_PROC_KEYS=y +CONFIG_SECURITY=y +CONFIG_SECURITY_NETWORK=y +CONFIG_SECURITY_SELINUX=y +CONFIG_SECURITY_SELINUX_BOOTPARAM=y +CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0 +CONFIG_SECURITY_SELINUX_DISABLE=y +CONFIG_IMA=y +CONFIG_IMA_APPRAISE=y +CONFIG_CRYPTO_USER=m +# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set +CONFIG_CRYPTO_CRYPTD=m +CONFIG_CRYPTO_TEST=m +CONFIG_CRYPTO_CCM=m +CONFIG_CRYPTO_GCM=m +CONFIG_CRYPTO_CTS=m +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_XTS=m +CONFIG_CRYPTO_XCBC=m +CONFIG_CRYPTO_VMAC=m +CONFIG_CRYPTO_CRC32=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_RMD128=m +CONFIG_CRYPTO_RMD160=m +CONFIG_CRYPTO_RMD256=m +CONFIG_CRYPTO_RMD320=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_CAMELLIA=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_FCRYPT=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_SALSA20=m +CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_ZLIB=y +CONFIG_CRYPTO_LZO=m +CONFIG_CRYPTO_LZ4=m +CONFIG_CRYPTO_LZ4HC=m +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m +CONFIG_ZCRYPT=m +CONFIG_CRYPTO_SHA1_S390=m +CONFIG_CRYPTO_SHA256_S390=m +CONFIG_CRYPTO_SHA512_S390=m +CONFIG_CRYPTO_DES_S390=m +CONFIG_CRYPTO_AES_S390=m +CONFIG_CRYPTO_GHASH_S390=m +CONFIG_ASYMMETRIC_KEY_TYPE=m +CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=m +CONFIG_PUBLIC_KEY_ALGO_RSA=m +CONFIG_X509_CERTIFICATE_PARSER=m +CONFIG_CRC7=m +CONFIG_CRC8=m +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_CORDIC=m +CONFIG_CMM=m +CONFIG_APPLDATA_BASE=y +CONFIG_KVM=m +CONFIG_KVM_S390_UCONTROL=y diff --git a/arch/s390/configs/zfcpdump_defconfig b/arch/s390/configs/zfcpdump_defconfig new file mode 100644 index 00000000000..d725c4d956e --- /dev/null +++ b/arch/s390/configs/zfcpdump_defconfig @@ -0,0 +1,86 @@ +# CONFIG_SWAP is not set +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_RCU_FAST_NO_HZ=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +# CONFIG_COMPAT_BRK is not set +CONFIG_PARTITION_ADVANCED=y +CONFIG_IBM_PARTITION=y +CONFIG_DEFAULT_DEADLINE=y +CONFIG_MARCH_Z9_109=y +# CONFIG_COMPAT is not set +CONFIG_NR_CPUS=2 +# CONFIG_HOTPLUG_CPU is not set +CONFIG_HZ_100=y +# CONFIG_COMPACTION is not set +# CONFIG_MIGRATION is not set +# CONFIG_CHECK_STACK is not set +# CONFIG_CHSC_SCH is not set +# CONFIG_SCM_BUS is not set +CONFIG_CRASH_DUMP=y +CONFIG_ZFCPDUMP=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_SECCOMP is not set +# CONFIG_IUCV is not set +CONFIG_ATM=y +CONFIG_ATM_LANE=y +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +# CONFIG_FIRMWARE_IN_KERNEL is not set +# CONFIG_BLK_DEV_XPRAM is not set +# CONFIG_DCSSBLK is not set +# CONFIG_DASD is not set +CONFIG_ENCLOSURE_SERVICES=y +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_SCSI_ENCLOSURE=y +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_CONSTANTS=y +CONFIG_SCSI_LOGGING=y +CONFIG_SCSI_SRP_ATTRS=y +CONFIG_ZFCP=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_SERIO is not set +# CONFIG_HVC_IUCV is not set +CONFIG_RAW_DRIVER=y +# CONFIG_SCLP_ASYNC is not set +# CONFIG_HMC_DRV is not set +# CONFIG_S390_TAPE is not set +# CONFIG_VMCP is not set +# CONFIG_MONWRITER is not set +# CONFIG_S390_VMUR is not set +# CONFIG_HID is not set +CONFIG_MEMSTICK=y +CONFIG_MEMSTICK_DEBUG=y +CONFIG_MEMSTICK_UNSAFE_RESUME=y +CONFIG_MSPRO_BLOCK=y +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_EXT2_FS=y +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT4_FS=y +CONFIG_EXT4_FS_POSIX_ACL=y +CONFIG_EXT4_FS_SECURITY=y +# CONFIG_INOTIFY_USER is not set +CONFIG_CONFIGFS_FS=y +CONFIG_PRINTK_TIME=y +CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_FS=y +CONFIG_DEBUG_KERNEL=y +# CONFIG_SCHED_DEBUG is not set +CONFIG_RCU_CPU_STALL_TIMEOUT=60 +# CONFIG_FTRACE is not set +# CONFIG_STRICT_DEVMEM is not set +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_SPARC=y +# CONFIG_PFAULT is not set +# CONFIG_S390_HYPFS_FS is not set +# CONFIG_VIRTUALIZATION is not set +# CONFIG_S390_GUEST is not set diff --git a/arch/s390/crypto/aes_s390.c b/arch/s390/crypto/aes_s390.c index b4dbade8ca2..46cae138ece 100644 --- a/arch/s390/crypto/aes_s390.c +++ b/arch/s390/crypto/aes_s390.c @@ -725,6 +725,8 @@ static struct crypto_alg xts_aes_alg = { } }; +static int xts_aes_alg_reg; + static int ctr_aes_set_key(struct crypto_tfm *tfm, const u8 *in_key, unsigned int key_len) { @@ -846,6 +848,8 @@ static struct crypto_alg ctr_aes_alg = { } }; +static int ctr_aes_alg_reg; + static int __init aes_s390_init(void) { int ret; @@ -884,6 +888,7 @@ static int __init aes_s390_init(void) ret = crypto_register_alg(&xts_aes_alg); if (ret) goto xts_aes_err; + xts_aes_alg_reg = 1; } if (crypt_s390_func_available(KMCTR_AES_128_ENCRYPT, @@ -902,6 +907,7 @@ static int __init aes_s390_init(void) free_page((unsigned long) ctrblk); goto ctr_aes_err; } + ctr_aes_alg_reg = 1; } out: @@ -921,9 +927,12 @@ aes_err: static void __exit aes_s390_fini(void) { - crypto_unregister_alg(&ctr_aes_alg); - free_page((unsigned long) ctrblk); - crypto_unregister_alg(&xts_aes_alg); + if (ctr_aes_alg_reg) { + crypto_unregister_alg(&ctr_aes_alg); + free_page((unsigned long) ctrblk); + } + if (xts_aes_alg_reg) + crypto_unregister_alg(&xts_aes_alg); crypto_unregister_alg(&cbc_aes_alg); crypto_unregister_alg(&ecb_aes_alg); crypto_unregister_alg(&aes_alg); diff --git a/arch/s390/defconfig b/arch/s390/defconfig index d204c65bf72..33f57514f42 100644 --- a/arch/s390/defconfig +++ b/arch/s390/defconfig @@ -38,13 +38,14 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_PARTITION_ADVANCED=y CONFIG_IBM_PARTITION=y -# CONFIG_EFI_PARTITION is not set CONFIG_DEFAULT_DEADLINE=y +CONFIG_MARCH_Z196=y CONFIG_HZ_100=y CONFIG_MEMORY_HOTPLUG=y CONFIG_MEMORY_HOTREMOVE=y CONFIG_KSM=y CONFIG_TRANSPARENT_HUGEPAGE=y +CONFIG_CMA=y CONFIG_CRASH_DUMP=y CONFIG_BINFMT_MISC=m CONFIG_HIBERNATION=y @@ -152,6 +153,7 @@ CONFIG_CRYPTO_CMAC=m CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_VMAC=m CONFIG_CRYPTO_CRC32=m +CONFIG_CRYPTO_CRCT10DIF=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD128=m diff --git a/arch/s390/include/asm/atomic.h b/arch/s390/include/asm/atomic.h index c797832daa5..fa9aaf7144b 100644 --- a/arch/s390/include/asm/atomic.h +++ b/arch/s390/include/asm/atomic.h @@ -19,21 +19,50 @@ #define ATOMIC_INIT(i) { (i) } -#define __CS_LOOP(ptr, op_val, op_string) ({ \ +#ifdef CONFIG_HAVE_MARCH_Z196_FEATURES + +#define __ATOMIC_OR "lao" +#define __ATOMIC_AND "lan" +#define __ATOMIC_ADD "laa" + +#define __ATOMIC_LOOP(ptr, op_val, op_string) \ +({ \ + int old_val; \ + \ + typecheck(atomic_t *, ptr); \ + asm volatile( \ + op_string " %0,%2,%1\n" \ + : "=d" (old_val), "+Q" ((ptr)->counter) \ + : "d" (op_val) \ + : "cc", "memory"); \ + old_val; \ +}) + +#else /* CONFIG_HAVE_MARCH_Z196_FEATURES */ + +#define __ATOMIC_OR "or" +#define __ATOMIC_AND "nr" +#define __ATOMIC_ADD "ar" + +#define __ATOMIC_LOOP(ptr, op_val, op_string) \ +({ \ int old_val, new_val; \ + \ + typecheck(atomic_t *, ptr); \ asm volatile( \ " l %0,%2\n" \ "0: lr %1,%0\n" \ op_string " %1,%3\n" \ " cs %0,%1,%2\n" \ " jl 0b" \ - : "=&d" (old_val), "=&d" (new_val), \ - "=Q" (((atomic_t *)(ptr))->counter) \ - : "d" (op_val), "Q" (((atomic_t *)(ptr))->counter) \ + : "=&d" (old_val), "=&d" (new_val), "+Q" ((ptr)->counter)\ + : "d" (op_val) \ : "cc", "memory"); \ - new_val; \ + old_val; \ }) +#endif /* CONFIG_HAVE_MARCH_Z196_FEATURES */ + static inline int atomic_read(const atomic_t *v) { int c; @@ -53,32 +82,45 @@ static inline void atomic_set(atomic_t *v, int i) static inline int atomic_add_return(int i, atomic_t *v) { - return __CS_LOOP(v, i, "ar"); + return __ATOMIC_LOOP(v, i, __ATOMIC_ADD) + i; } -#define atomic_add(_i, _v) atomic_add_return(_i, _v) -#define atomic_add_negative(_i, _v) (atomic_add_return(_i, _v) < 0) -#define atomic_inc(_v) atomic_add_return(1, _v) -#define atomic_inc_return(_v) atomic_add_return(1, _v) -#define atomic_inc_and_test(_v) (atomic_add_return(1, _v) == 0) -static inline int atomic_sub_return(int i, atomic_t *v) +static inline void atomic_add(int i, atomic_t *v) { - return __CS_LOOP(v, i, "sr"); +#ifdef CONFIG_HAVE_MARCH_Z196_FEATURES + if (__builtin_constant_p(i) && (i > -129) && (i < 128)) { + asm volatile( + "asi %0,%1\n" + : "+Q" (v->counter) + : "i" (i) + : "cc", "memory"); + } else { + atomic_add_return(i, v); + } +#else + atomic_add_return(i, v); +#endif } -#define atomic_sub(_i, _v) atomic_sub_return(_i, _v) + +#define atomic_add_negative(_i, _v) (atomic_add_return(_i, _v) < 0) +#define atomic_inc(_v) atomic_add(1, _v) +#define atomic_inc_return(_v) atomic_add_return(1, _v) +#define atomic_inc_and_test(_v) (atomic_add_return(1, _v) == 0) +#define atomic_sub(_i, _v) atomic_add(-(int)(_i), _v) +#define atomic_sub_return(_i, _v) atomic_add_return(-(int)(_i), _v) #define atomic_sub_and_test(_i, _v) (atomic_sub_return(_i, _v) == 0) -#define atomic_dec(_v) atomic_sub_return(1, _v) +#define atomic_dec(_v) atomic_sub(1, _v) #define atomic_dec_return(_v) atomic_sub_return(1, _v) #define atomic_dec_and_test(_v) (atomic_sub_return(1, _v) == 0) -static inline void atomic_clear_mask(unsigned long mask, atomic_t *v) +static inline void atomic_clear_mask(unsigned int mask, atomic_t *v) { - __CS_LOOP(v, ~mask, "nr"); + __ATOMIC_LOOP(v, ~mask, __ATOMIC_AND); } -static inline void atomic_set_mask(unsigned long mask, atomic_t *v) +static inline void atomic_set_mask(unsigned int mask, atomic_t *v) { - __CS_LOOP(v, mask, "or"); + __ATOMIC_LOOP(v, mask, __ATOMIC_OR); } #define atomic_xchg(v, new) (xchg(&((v)->counter), new)) @@ -87,8 +129,8 @@ static inline int atomic_cmpxchg(atomic_t *v, int old, int new) { asm volatile( " cs %0,%2,%1" - : "+d" (old), "=Q" (v->counter) - : "d" (new), "Q" (v->counter) + : "+d" (old), "+Q" (v->counter) + : "d" (new) : "cc", "memory"); return old; } @@ -109,27 +151,56 @@ static inline int __atomic_add_unless(atomic_t *v, int a, int u) } -#undef __CS_LOOP +#undef __ATOMIC_LOOP #define ATOMIC64_INIT(i) { (i) } #ifdef CONFIG_64BIT -#define __CSG_LOOP(ptr, op_val, op_string) ({ \ +#ifdef CONFIG_HAVE_MARCH_Z196_FEATURES + +#define __ATOMIC64_OR "laog" +#define __ATOMIC64_AND "lang" +#define __ATOMIC64_ADD "laag" + +#define __ATOMIC64_LOOP(ptr, op_val, op_string) \ +({ \ + long long old_val; \ + \ + typecheck(atomic64_t *, ptr); \ + asm volatile( \ + op_string " %0,%2,%1\n" \ + : "=d" (old_val), "+Q" ((ptr)->counter) \ + : "d" (op_val) \ + : "cc", "memory"); \ + old_val; \ +}) + +#else /* CONFIG_HAVE_MARCH_Z196_FEATURES */ + +#define __ATOMIC64_OR "ogr" +#define __ATOMIC64_AND "ngr" +#define __ATOMIC64_ADD "agr" + +#define __ATOMIC64_LOOP(ptr, op_val, op_string) \ +({ \ long long old_val, new_val; \ + \ + typecheck(atomic64_t *, ptr); \ asm volatile( \ " lg %0,%2\n" \ "0: lgr %1,%0\n" \ op_string " %1,%3\n" \ " csg %0,%1,%2\n" \ " jl 0b" \ - : "=&d" (old_val), "=&d" (new_val), \ - "=Q" (((atomic_t *)(ptr))->counter) \ - : "d" (op_val), "Q" (((atomic_t *)(ptr))->counter) \ + : "=&d" (old_val), "=&d" (new_val), "+Q" ((ptr)->counter)\ + : "d" (op_val) \ : "cc", "memory"); \ - new_val; \ + old_val; \ }) +#endif /* CONFIG_HAVE_MARCH_Z196_FEATURES */ + static inline long long atomic64_read(const atomic64_t *v) { long long c; @@ -149,22 +220,17 @@ static inline void atomic64_set(atomic64_t *v, long long i) static inline long long atomic64_add_return(long long i, atomic64_t *v) { - return __CSG_LOOP(v, i, "agr"); -} - -static inline long long atomic64_sub_return(long long i, atomic64_t *v) -{ - return __CSG_LOOP(v, i, "sgr"); + return __ATOMIC64_LOOP(v, i, __ATOMIC64_ADD) + i; } static inline void atomic64_clear_mask(unsigned long mask, atomic64_t *v) { - __CSG_LOOP(v, ~mask, "ngr"); + __ATOMIC64_LOOP(v, ~mask, __ATOMIC64_AND); } static inline void atomic64_set_mask(unsigned long mask, atomic64_t *v) { - __CSG_LOOP(v, mask, "ogr"); + __ATOMIC64_LOOP(v, mask, __ATOMIC64_OR); } #define atomic64_xchg(v, new) (xchg(&((v)->counter), new)) @@ -174,13 +240,13 @@ static inline long long atomic64_cmpxchg(atomic64_t *v, { asm volatile( " csg %0,%2,%1" - : "+d" (old), "=Q" (v->counter) - : "d" (new), "Q" (v->counter) + : "+d" (old), "+Q" (v->counter) + : "d" (new) : "cc", "memory"); return old; } -#undef __CSG_LOOP +#undef __ATOMIC64_LOOP #else /* CONFIG_64BIT */ @@ -216,8 +282,8 @@ static inline long long atomic64_xchg(atomic64_t *v, long long new) " lm %0,%N0,%1\n" "0: cds %0,%2,%1\n" " jl 0b\n" - : "=&d" (rp_old), "=Q" (v->counter) - : "d" (rp_new), "Q" (v->counter) + : "=&d" (rp_old), "+Q" (v->counter) + : "d" (rp_new) : "cc"); return rp_old.pair; } @@ -230,8 +296,8 @@ static inline long long atomic64_cmpxchg(atomic64_t *v, asm volatile( " cds %0,%2,%1" - : "+&d" (rp_old), "=Q" (v->counter) - : "d" (rp_new), "Q" (v->counter) + : "+&d" (rp_old), "+Q" (v->counter) + : "d" (rp_new) : "cc"); return rp_old.pair; } @@ -248,17 +314,6 @@ static inline long long atomic64_add_return(long long i, atomic64_t *v) return new; } -static inline long long atomic64_sub_return(long long i, atomic64_t *v) -{ - long long old, new; - - do { - old = atomic64_read(v); - new = old - i; - } while (atomic64_cmpxchg(v, old, new) != old); - return new; -} - static inline void atomic64_set_mask(unsigned long long mask, atomic64_t *v) { long long old, new; @@ -281,7 +336,24 @@ static inline void atomic64_clear_mask(unsigned long long mask, atomic64_t *v) #endif /* CONFIG_64BIT */ -static inline int atomic64_add_unless(atomic64_t *v, long long a, long long u) +static inline void atomic64_add(long long i, atomic64_t *v) +{ +#ifdef CONFIG_HAVE_MARCH_Z196_FEATURES + if (__builtin_constant_p(i) && (i > -129) && (i < 128)) { + asm volatile( + "agsi %0,%1\n" + : "+Q" (v->counter) + : "i" (i) + : "cc", "memory"); + } else { + atomic64_add_return(i, v); + } +#else + atomic64_add_return(i, v); +#endif +} + +static inline int atomic64_add_unless(atomic64_t *v, long long i, long long u) { long long c, old; @@ -289,7 +361,7 @@ static inline int atomic64_add_unless(atomic64_t *v, long long a, long long u) for (;;) { if (unlikely(c == u)) break; - old = atomic64_cmpxchg(v, c, c + a); + old = atomic64_cmpxchg(v, c, c + i); if (likely(old == c)) break; c = old; @@ -314,14 +386,14 @@ static inline long long atomic64_dec_if_positive(atomic64_t *v) return dec; } -#define atomic64_add(_i, _v) atomic64_add_return(_i, _v) #define atomic64_add_negative(_i, _v) (atomic64_add_return(_i, _v) < 0) -#define atomic64_inc(_v) atomic64_add_return(1, _v) +#define atomic64_inc(_v) atomic64_add(1, _v) #define atomic64_inc_return(_v) atomic64_add_return(1, _v) #define atomic64_inc_and_test(_v) (atomic64_add_return(1, _v) == 0) -#define atomic64_sub(_i, _v) atomic64_sub_return(_i, _v) +#define atomic64_sub_return(_i, _v) atomic64_add_return(-(long long)(_i), _v) +#define atomic64_sub(_i, _v) atomic64_add(-(long long)(_i), _v) #define atomic64_sub_and_test(_i, _v) (atomic64_sub_return(_i, _v) == 0) -#define atomic64_dec(_v) atomic64_sub_return(1, _v) +#define atomic64_dec(_v) atomic64_sub(1, _v) #define atomic64_dec_return(_v) atomic64_sub_return(1, _v) #define atomic64_dec_and_test(_v) (atomic64_sub_return(1, _v) == 0) #define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0) diff --git a/arch/s390/include/asm/bitops.h b/arch/s390/include/asm/bitops.h index 10135a38673..6e6ad068082 100644 --- a/arch/s390/include/asm/bitops.h +++ b/arch/s390/include/asm/bitops.h @@ -1,10 +1,40 @@ /* - * S390 version - * Copyright IBM Corp. 1999 - * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com) + * Copyright IBM Corp. 1999,2013 * - * Derived from "include/asm-i386/bitops.h" - * Copyright (C) 1992, Linus Torvalds + * Author(s): Martin Schwidefsky <schwidefsky@de.ibm.com>, + * + * The description below was taken in large parts from the powerpc + * bitops header file: + * Within a word, bits are numbered LSB first. Lot's of places make + * this assumption by directly testing bits with (val & (1<<nr)). + * This can cause confusion for large (> 1 word) bitmaps on a + * big-endian system because, unlike little endian, the number of each + * bit depends on the word size. + * + * The bitop functions are defined to work on unsigned longs, so for an + * s390x system the bits end up numbered: + * |63..............0|127............64|191...........128|255...........196| + * and on s390: + * |31.....0|63....31|95....64|127...96|159..128|191..160|223..192|255..224| + * + * There are a few little-endian macros used mostly for filesystem + * bitmaps, these work on similar bit arrays layouts, but + * byte-oriented: + * |7...0|15...8|23...16|31...24|39...32|47...40|55...48|63...56| + * + * The main difference is that bit 3-5 (64b) or 3-4 (32b) in the bit + * number field needs to be reversed compared to the big-endian bit + * fields. This can be achieved by XOR with 0x38 (64b) or 0x18 (32b). + * + * We also have special functions which work with an MSB0 encoding: + * on an s390x system the bits are numbered: + * |0..............63|64............127|128...........191|192...........255| + * and on s390: + * |0.....31|31....63|64....95|96...127|128..159|160..191|192..223|224..255| + * + * The main difference is that bit 0-63 (64b) or 0-31 (32b) in the bit + * number field needs to be reversed compared to the LSB0 encoded bit + * fields. This can be achieved by XOR with 0x3f (64b) or 0x1f (32b). * */ @@ -15,556 +45,348 @@ #error only <linux/bitops.h> can be included directly #endif +#include <linux/typecheck.h> #include <linux/compiler.h> -/* - * 32 bit bitops format: - * bit 0 is the LSB of *addr; bit 31 is the MSB of *addr; - * bit 32 is the LSB of *(addr+4). That combined with the - * big endian byte order on S390 give the following bit - * order in memory: - * 1f 1e 1d 1c 1b 1a 19 18 17 16 15 14 13 12 11 10 \ - * 0f 0e 0d 0c 0b 0a 09 08 07 06 05 04 03 02 01 00 - * after that follows the next long with bit numbers - * 3f 3e 3d 3c 3b 3a 39 38 37 36 35 34 33 32 31 30 - * 2f 2e 2d 2c 2b 2a 29 28 27 26 25 24 23 22 21 20 - * The reason for this bit ordering is the fact that - * in the architecture independent code bits operations - * of the form "flags |= (1 << bitnr)" are used INTERMIXED - * with operation of the form "set_bit(bitnr, flags)". - * - * 64 bit bitops format: - * bit 0 is the LSB of *addr; bit 63 is the MSB of *addr; - * bit 64 is the LSB of *(addr+8). That combined with the - * big endian byte order on S390 give the following bit - * order in memory: - * 3f 3e 3d 3c 3b 3a 39 38 37 36 35 34 33 32 31 30 - * 2f 2e 2d 2c 2b 2a 29 28 27 26 25 24 23 22 21 20 - * 1f 1e 1d 1c 1b 1a 19 18 17 16 15 14 13 12 11 10 - * 0f 0e 0d 0c 0b 0a 09 08 07 06 05 04 03 02 01 00 - * after that follows the next long with bit numbers - * 7f 7e 7d 7c 7b 7a 79 78 77 76 75 74 73 72 71 70 - * 6f 6e 6d 6c 6b 6a 69 68 67 66 65 64 63 62 61 60 - * 5f 5e 5d 5c 5b 5a 59 58 57 56 55 54 53 52 51 50 - * 4f 4e 4d 4c 4b 4a 49 48 47 46 45 44 43 42 41 40 - * The reason for this bit ordering is the fact that - * in the architecture independent code bits operations - * of the form "flags |= (1 << bitnr)" are used INTERMIXED - * with operation of the form "set_bit(bitnr, flags)". - */ - -/* bitmap tables from arch/s390/kernel/bitmap.c */ -extern const char _oi_bitmap[]; -extern const char _ni_bitmap[]; -extern const char _zb_findmap[]; -extern const char _sb_findmap[]; - #ifndef CONFIG_64BIT #define __BITOPS_OR "or" #define __BITOPS_AND "nr" #define __BITOPS_XOR "xr" -#define __BITOPS_LOOP(__old, __new, __addr, __val, __op_string) \ +#define __BITOPS_LOOP(__addr, __val, __op_string) \ +({ \ + unsigned long __old, __new; \ + \ + typecheck(unsigned long *, (__addr)); \ asm volatile( \ " l %0,%2\n" \ "0: lr %1,%0\n" \ __op_string " %1,%3\n" \ " cs %0,%1,%2\n" \ " jl 0b" \ - : "=&d" (__old), "=&d" (__new), \ - "=Q" (*(unsigned long *) __addr) \ - : "d" (__val), "Q" (*(unsigned long *) __addr) \ - : "cc"); + : "=&d" (__old), "=&d" (__new), "+Q" (*(__addr))\ + : "d" (__val) \ + : "cc"); \ + __old; \ +}) #else /* CONFIG_64BIT */ +#ifdef CONFIG_HAVE_MARCH_Z196_FEATURES + +#define __BITOPS_OR "laog" +#define __BITOPS_AND "lang" +#define __BITOPS_XOR "laxg" + +#define __BITOPS_LOOP(__addr, __val, __op_string) \ +({ \ + unsigned long __old; \ + \ + typecheck(unsigned long *, (__addr)); \ + asm volatile( \ + __op_string " %0,%2,%1\n" \ + : "=d" (__old), "+Q" (*(__addr)) \ + : "d" (__val) \ + : "cc"); \ + __old; \ +}) + +#else /* CONFIG_HAVE_MARCH_Z196_FEATURES */ + #define __BITOPS_OR "ogr" #define __BITOPS_AND "ngr" #define __BITOPS_XOR "xgr" -#define __BITOPS_LOOP(__old, __new, __addr, __val, __op_string) \ +#define __BITOPS_LOOP(__addr, __val, __op_string) \ +({ \ + unsigned long __old, __new; \ + \ + typecheck(unsigned long *, (__addr)); \ asm volatile( \ " lg %0,%2\n" \ "0: lgr %1,%0\n" \ __op_string " %1,%3\n" \ " csg %0,%1,%2\n" \ " jl 0b" \ - : "=&d" (__old), "=&d" (__new), \ - "=Q" (*(unsigned long *) __addr) \ - : "d" (__val), "Q" (*(unsigned long *) __addr) \ - : "cc"); + : "=&d" (__old), "=&d" (__new), "+Q" (*(__addr))\ + : "d" (__val) \ + : "cc"); \ + __old; \ +}) + +#endif /* CONFIG_HAVE_MARCH_Z196_FEATURES */ #endif /* CONFIG_64BIT */ #define __BITOPS_WORDS(bits) (((bits) + BITS_PER_LONG - 1) / BITS_PER_LONG) -#ifdef CONFIG_SMP -/* - * SMP safe set_bit routine based on compare and swap (CS) - */ -static inline void set_bit_cs(unsigned long nr, volatile unsigned long *ptr) +static inline unsigned long * +__bitops_word(unsigned long nr, volatile unsigned long *ptr) +{ + unsigned long addr; + + addr = (unsigned long)ptr + ((nr ^ (nr & (BITS_PER_LONG - 1))) >> 3); + return (unsigned long *)addr; +} + +static inline unsigned char * +__bitops_byte(unsigned long nr, volatile unsigned long *ptr) { - unsigned long addr, old, new, mask; + return ((unsigned char *)ptr) + ((nr ^ (BITS_PER_LONG - 8)) >> 3); +} + +static inline void set_bit(unsigned long nr, volatile unsigned long *ptr) +{ + unsigned long *addr = __bitops_word(nr, ptr); + unsigned long mask; - addr = (unsigned long) ptr; - /* calculate address for CS */ - addr += (nr ^ (nr & (BITS_PER_LONG - 1))) >> 3; - /* make OR mask */ +#ifdef CONFIG_HAVE_MARCH_ZEC12_FEATURES + if (__builtin_constant_p(nr)) { + unsigned char *caddr = __bitops_byte(nr, ptr); + + asm volatile( + "oi %0,%b1\n" + : "+Q" (*caddr) + : "i" (1 << (nr & 7)) + : "cc"); + return; + } +#endif mask = 1UL << (nr & (BITS_PER_LONG - 1)); - /* Do the atomic update. */ - __BITOPS_LOOP(old, new, addr, mask, __BITOPS_OR); + __BITOPS_LOOP(addr, mask, __BITOPS_OR); } -/* - * SMP safe clear_bit routine based on compare and swap (CS) - */ -static inline void clear_bit_cs(unsigned long nr, volatile unsigned long *ptr) +static inline void clear_bit(unsigned long nr, volatile unsigned long *ptr) { - unsigned long addr, old, new, mask; + unsigned long *addr = __bitops_word(nr, ptr); + unsigned long mask; + +#ifdef CONFIG_HAVE_MARCH_ZEC12_FEATURES + if (__builtin_constant_p(nr)) { + unsigned char *caddr = __bitops_byte(nr, ptr); - addr = (unsigned long) ptr; - /* calculate address for CS */ - addr += (nr ^ (nr & (BITS_PER_LONG - 1))) >> 3; - /* make AND mask */ + asm volatile( + "ni %0,%b1\n" + : "+Q" (*caddr) + : "i" (~(1 << (nr & 7))) + : "cc"); + return; + } +#endif mask = ~(1UL << (nr & (BITS_PER_LONG - 1))); - /* Do the atomic update. */ - __BITOPS_LOOP(old, new, addr, mask, __BITOPS_AND); + __BITOPS_LOOP(addr, mask, __BITOPS_AND); } -/* - * SMP safe change_bit routine based on compare and swap (CS) - */ -static inline void change_bit_cs(unsigned long nr, volatile unsigned long *ptr) +static inline void change_bit(unsigned long nr, volatile unsigned long *ptr) { - unsigned long addr, old, new, mask; + unsigned long *addr = __bitops_word(nr, ptr); + unsigned long mask; + +#ifdef CONFIG_HAVE_MARCH_ZEC12_FEATURES + if (__builtin_constant_p(nr)) { + unsigned char *caddr = __bitops_byte(nr, ptr); - addr = (unsigned long) ptr; - /* calculate address for CS */ - addr += (nr ^ (nr & (BITS_PER_LONG - 1))) >> 3; - /* make XOR mask */ + asm volatile( + "xi %0,%b1\n" + : "+Q" (*caddr) + : "i" (1 << (nr & 7)) + : "cc"); + return; + } +#endif mask = 1UL << (nr & (BITS_PER_LONG - 1)); - /* Do the atomic update. */ - __BITOPS_LOOP(old, new, addr, mask, __BITOPS_XOR); + __BITOPS_LOOP(addr, mask, __BITOPS_XOR); } -/* - * SMP safe test_and_set_bit routine based on compare and swap (CS) - */ static inline int -test_and_set_bit_cs(unsigned long nr, volatile unsigned long *ptr) +test_and_set_bit(unsigned long nr, volatile unsigned long *ptr) { - unsigned long addr, old, new, mask; + unsigned long *addr = __bitops_word(nr, ptr); + unsigned long old, mask; - addr = (unsigned long) ptr; - /* calculate address for CS */ - addr += (nr ^ (nr & (BITS_PER_LONG - 1))) >> 3; - /* make OR/test mask */ mask = 1UL << (nr & (BITS_PER_LONG - 1)); - /* Do the atomic update. */ - __BITOPS_LOOP(old, new, addr, mask, __BITOPS_OR); + old = __BITOPS_LOOP(addr, mask, __BITOPS_OR); barrier(); return (old & mask) != 0; } -/* - * SMP safe test_and_clear_bit routine based on compare and swap (CS) - */ static inline int -test_and_clear_bit_cs(unsigned long nr, volatile unsigned long *ptr) +test_and_clear_bit(unsigned long nr, volatile unsigned long *ptr) { - unsigned long addr, old, new, mask; + unsigned long *addr = __bitops_word(nr, ptr); + unsigned long old, mask; - addr = (unsigned long) ptr; - /* calculate address for CS */ - addr += (nr ^ (nr & (BITS_PER_LONG - 1))) >> 3; - /* make AND/test mask */ mask = ~(1UL << (nr & (BITS_PER_LONG - 1))); - /* Do the atomic update. */ - __BITOPS_LOOP(old, new, addr, mask, __BITOPS_AND); + old = __BITOPS_LOOP(addr, mask, __BITOPS_AND); barrier(); - return (old ^ new) != 0; + return (old & ~mask) != 0; } -/* - * SMP safe test_and_change_bit routine based on compare and swap (CS) - */ static inline int -test_and_change_bit_cs(unsigned long nr, volatile unsigned long *ptr) +test_and_change_bit(unsigned long nr, volatile unsigned long *ptr) { - unsigned long addr, old, new, mask; + unsigned long *addr = __bitops_word(nr, ptr); + unsigned long old, mask; - addr = (unsigned long) ptr; - /* calculate address for CS */ - addr += (nr ^ (nr & (BITS_PER_LONG - 1))) >> 3; - /* make XOR/test mask */ mask = 1UL << (nr & (BITS_PER_LONG - 1)); - /* Do the atomic update. */ - __BITOPS_LOOP(old, new, addr, mask, __BITOPS_XOR); + old = __BITOPS_LOOP(addr, mask, __BITOPS_XOR); barrier(); return (old & mask) != 0; } -#endif /* CONFIG_SMP */ -/* - * fast, non-SMP set_bit routine - */ static inline void __set_bit(unsigned long nr, volatile unsigned long *ptr) { - unsigned long addr; - - addr = (unsigned long) ptr + ((nr ^ (BITS_PER_LONG - 8)) >> 3); - asm volatile( - " oc %O0(1,%R0),%1" - : "+Q" (*(char *) addr) : "Q" (_oi_bitmap[nr & 7]) : "cc"); -} - -static inline void -__constant_set_bit(const unsigned long nr, volatile unsigned long *ptr) -{ - unsigned long addr; + unsigned char *addr = __bitops_byte(nr, ptr); - addr = ((unsigned long) ptr) + ((nr ^ (BITS_PER_LONG - 8)) >> 3); - *(unsigned char *) addr |= 1 << (nr & 7); + *addr |= 1 << (nr & 7); } -#define set_bit_simple(nr,addr) \ -(__builtin_constant_p((nr)) ? \ - __constant_set_bit((nr),(addr)) : \ - __set_bit((nr),(addr)) ) - -/* - * fast, non-SMP clear_bit routine - */ static inline void __clear_bit(unsigned long nr, volatile unsigned long *ptr) { - unsigned long addr; - - addr = (unsigned long) ptr + ((nr ^ (BITS_PER_LONG - 8)) >> 3); - asm volatile( - " nc %O0(1,%R0),%1" - : "+Q" (*(char *) addr) : "Q" (_ni_bitmap[nr & 7]) : "cc"); -} - -static inline void -__constant_clear_bit(const unsigned long nr, volatile unsigned long *ptr) -{ - unsigned long addr; + unsigned char *addr = __bitops_byte(nr, ptr); - addr = ((unsigned long) ptr) + ((nr ^ (BITS_PER_LONG - 8)) >> 3); - *(unsigned char *) addr &= ~(1 << (nr & 7)); + *addr &= ~(1 << (nr & 7)); } -#define clear_bit_simple(nr,addr) \ -(__builtin_constant_p((nr)) ? \ - __constant_clear_bit((nr),(addr)) : \ - __clear_bit((nr),(addr)) ) - -/* - * fast, non-SMP change_bit routine - */ static inline void __change_bit(unsigned long nr, volatile unsigned long *ptr) { - unsigned long addr; - - addr = (unsigned long) ptr + ((nr ^ (BITS_PER_LONG - 8)) >> 3); - asm volatile( - " xc %O0(1,%R0),%1" - : "+Q" (*(char *) addr) : "Q" (_oi_bitmap[nr & 7]) : "cc"); -} - -static inline void -__constant_change_bit(const unsigned long nr, volatile unsigned long *ptr) -{ - unsigned long addr; + unsigned char *addr = __bitops_byte(nr, ptr); - addr = ((unsigned long) ptr) + ((nr ^ (BITS_PER_LONG - 8)) >> 3); - *(unsigned char *) addr ^= 1 << (nr & 7); + *addr ^= 1 << (nr & 7); } -#define change_bit_simple(nr,addr) \ -(__builtin_constant_p((nr)) ? \ - __constant_change_bit((nr),(addr)) : \ - __change_bit((nr),(addr)) ) - -/* - * fast, non-SMP test_and_set_bit routine - */ static inline int -test_and_set_bit_simple(unsigned long nr, volatile unsigned long *ptr) +__test_and_set_bit(unsigned long nr, volatile unsigned long *ptr) { - unsigned long addr; + unsigned char *addr = __bitops_byte(nr, ptr); unsigned char ch; - addr = (unsigned long) ptr + ((nr ^ (BITS_PER_LONG - 8)) >> 3); - ch = *(unsigned char *) addr; - asm volatile( - " oc %O0(1,%R0),%1" - : "+Q" (*(char *) addr) : "Q" (_oi_bitmap[nr & 7]) - : "cc", "memory"); + ch = *addr; + *addr |= 1 << (nr & 7); return (ch >> (nr & 7)) & 1; } -#define __test_and_set_bit(X,Y) test_and_set_bit_simple(X,Y) -/* - * fast, non-SMP test_and_clear_bit routine - */ static inline int -test_and_clear_bit_simple(unsigned long nr, volatile unsigned long *ptr) +__test_and_clear_bit(unsigned long nr, volatile unsigned long *ptr) { - unsigned long addr; + unsigned char *addr = __bitops_byte(nr, ptr); unsigned char ch; - addr = (unsigned long) ptr + ((nr ^ (BITS_PER_LONG - 8)) >> 3); - ch = *(unsigned char *) addr; - asm volatile( - " nc %O0(1,%R0),%1" - : "+Q" (*(char *) addr) : "Q" (_ni_bitmap[nr & 7]) - : "cc", "memory"); + ch = *addr; + *addr &= ~(1 << (nr & 7)); return (ch >> (nr & 7)) & 1; } -#define __test_and_clear_bit(X,Y) test_and_clear_bit_simple(X,Y) -/* - * fast, non-SMP test_and_change_bit routine - */ static inline int -test_and_change_bit_simple(unsigned long nr, volatile unsigned long *ptr) +__test_and_change_bit(unsigned long nr, volatile unsigned long *ptr) { - unsigned long addr; + unsigned char *addr = __bitops_byte(nr, ptr); unsigned char ch; - addr = (unsigned long) ptr + ((nr ^ (BITS_PER_LONG - 8)) >> 3); - ch = *(unsigned char *) addr; - asm volatile( - " xc %O0(1,%R0),%1" - : "+Q" (*(char *) addr) : "Q" (_oi_bitmap[nr & 7]) - : "cc", "memory"); + ch = *addr; + *addr ^= 1 << (nr & 7); return (ch >> (nr & 7)) & 1; } -#define __test_and_change_bit(X,Y) test_and_change_bit_simple(X,Y) - -#ifdef CONFIG_SMP -#define set_bit set_bit_cs -#define clear_bit clear_bit_cs -#define change_bit change_bit_cs -#define test_and_set_bit test_and_set_bit_cs -#define test_and_clear_bit test_and_clear_bit_cs -#define test_and_change_bit test_and_change_bit_cs -#else -#define set_bit set_bit_simple -#define clear_bit clear_bit_simple -#define change_bit change_bit_simple -#define test_and_set_bit test_and_set_bit_simple -#define test_and_clear_bit test_and_clear_bit_simple -#define test_and_change_bit test_and_change_bit_simple -#endif - - -/* - * This routine doesn't need to be atomic. - */ -static inline int __test_bit(unsigned long nr, const volatile unsigned long *ptr) +static inline int test_bit(unsigned long nr, const volatile unsigned long *ptr) { - unsigned long addr; - unsigned char ch; - - addr = (unsigned long) ptr + ((nr ^ (BITS_PER_LONG - 8)) >> 3); - ch = *(volatile unsigned char *) addr; - return (ch >> (nr & 7)) & 1; -} + const volatile unsigned char *addr; -static inline int -__constant_test_bit(unsigned long nr, const volatile unsigned long *addr) { - return (((volatile char *) addr) - [(nr^(BITS_PER_LONG-8))>>3] & (1<<(nr&7))) != 0; + addr = ((const volatile unsigned char *)ptr); + addr += (nr ^ (BITS_PER_LONG - 8)) >> 3; + return (*addr >> (nr & 7)) & 1; } -#define test_bit(nr,addr) \ -(__builtin_constant_p((nr)) ? \ - __constant_test_bit((nr),(addr)) : \ - __test_bit((nr),(addr)) ) - /* - * Optimized find bit helper functions. - */ - -/** - * __ffz_word_loop - find byte offset of first long != -1UL - * @addr: pointer to array of unsigned long - * @size: size of the array in bits + * Functions which use MSB0 bit numbering. + * On an s390x system the bits are numbered: + * |0..............63|64............127|128...........191|192...........255| + * and on s390: + * |0.....31|31....63|64....95|96...127|128..159|160..191|192..223|224..255| */ -static inline unsigned long __ffz_word_loop(const unsigned long *addr, - unsigned long size) -{ - typedef struct { long _[__BITOPS_WORDS(size)]; } addrtype; - unsigned long bytes = 0; - - asm volatile( -#ifndef CONFIG_64BIT - " ahi %1,-1\n" - " sra %1,5\n" - " jz 1f\n" - "0: c %2,0(%0,%3)\n" - " jne 1f\n" - " la %0,4(%0)\n" - " brct %1,0b\n" - "1:\n" -#else - " aghi %1,-1\n" - " srag %1,%1,6\n" - " jz 1f\n" - "0: cg %2,0(%0,%3)\n" - " jne 1f\n" - " la %0,8(%0)\n" - " brct %1,0b\n" - "1:\n" -#endif - : "+&a" (bytes), "+&d" (size) - : "d" (-1UL), "a" (addr), "m" (*(addrtype *) addr) - : "cc" ); - return bytes; -} +unsigned long find_first_bit_inv(const unsigned long *addr, unsigned long size); +unsigned long find_next_bit_inv(const unsigned long *addr, unsigned long size, + unsigned long offset); -/** - * __ffs_word_loop - find byte offset of first long != 0UL - * @addr: pointer to array of unsigned long - * @size: size of the array in bits - */ -static inline unsigned long __ffs_word_loop(const unsigned long *addr, - unsigned long size) +static inline void set_bit_inv(unsigned long nr, volatile unsigned long *ptr) { - typedef struct { long _[__BITOPS_WORDS(size)]; } addrtype; - unsigned long bytes = 0; - - asm volatile( -#ifndef CONFIG_64BIT - " ahi %1,-1\n" - " sra %1,5\n" - " jz 1f\n" - "0: c %2,0(%0,%3)\n" - " jne 1f\n" - " la %0,4(%0)\n" - " brct %1,0b\n" - "1:\n" -#else - " aghi %1,-1\n" - " srag %1,%1,6\n" - " jz 1f\n" - "0: cg %2,0(%0,%3)\n" - " jne 1f\n" - " la %0,8(%0)\n" - " brct %1,0b\n" - "1:\n" -#endif - : "+&a" (bytes), "+&a" (size) - : "d" (0UL), "a" (addr), "m" (*(addrtype *) addr) - : "cc" ); - return bytes; + return set_bit(nr ^ (BITS_PER_LONG - 1), ptr); } -/** - * __ffz_word - add number of the first unset bit - * @nr: base value the bit number is added to - * @word: the word that is searched for unset bits - */ -static inline unsigned long __ffz_word(unsigned long nr, unsigned long word) +static inline void clear_bit_inv(unsigned long nr, volatile unsigned long *ptr) { -#ifdef CONFIG_64BIT - if ((word & 0xffffffff) == 0xffffffff) { - word >>= 32; - nr += 32; - } -#endif - if ((word & 0xffff) == 0xffff) { - word >>= 16; - nr += 16; - } - if ((word & 0xff) == 0xff) { - word >>= 8; - nr += 8; - } - return nr + _zb_findmap[(unsigned char) word]; + return clear_bit(nr ^ (BITS_PER_LONG - 1), ptr); } -/** - * __ffs_word - add number of the first set bit - * @nr: base value the bit number is added to - * @word: the word that is searched for set bits - */ -static inline unsigned long __ffs_word(unsigned long nr, unsigned long word) +static inline void __set_bit_inv(unsigned long nr, volatile unsigned long *ptr) { -#ifdef CONFIG_64BIT - if ((word & 0xffffffff) == 0) { - word >>= 32; - nr += 32; - } -#endif - if ((word & 0xffff) == 0) { - word >>= 16; - nr += 16; - } - if ((word & 0xff) == 0) { - word >>= 8; - nr += 8; - } - return nr + _sb_findmap[(unsigned char) word]; + return __set_bit(nr ^ (BITS_PER_LONG - 1), ptr); } - -/** - * __load_ulong_be - load big endian unsigned long - * @p: pointer to array of unsigned long - * @offset: byte offset of source value in the array - */ -static inline unsigned long __load_ulong_be(const unsigned long *p, - unsigned long offset) +static inline void __clear_bit_inv(unsigned long nr, volatile unsigned long *ptr) { - p = (unsigned long *)((unsigned long) p + offset); - return *p; + return __clear_bit(nr ^ (BITS_PER_LONG - 1), ptr); } -/** - * __load_ulong_le - load little endian unsigned long - * @p: pointer to array of unsigned long - * @offset: byte offset of source value in the array - */ -static inline unsigned long __load_ulong_le(const unsigned long *p, - unsigned long offset) +static inline int test_bit_inv(unsigned long nr, + const volatile unsigned long *ptr) { - unsigned long word; - - p = (unsigned long *)((unsigned long) p + offset); -#ifndef CONFIG_64BIT - asm volatile( - " ic %0,%O1(%R1)\n" - " icm %0,2,%O1+1(%R1)\n" - " icm %0,4,%O1+2(%R1)\n" - " icm %0,8,%O1+3(%R1)" - : "=&d" (word) : "Q" (*p) : "cc"); -#else - asm volatile( - " lrvg %0,%1" - : "=d" (word) : "m" (*p) ); -#endif - return word; + return test_bit(nr ^ (BITS_PER_LONG - 1), ptr); } -/* - * The various find bit functions. - */ +#ifdef CONFIG_HAVE_MARCH_Z9_109_FEATURES -/* - * ffz - find first zero in word. - * @word: The word to search +/** + * __flogr - find leftmost one + * @word - The word to search * - * Undefined if no zero exists, so code should check against ~0UL first. - */ -static inline unsigned long ffz(unsigned long word) -{ - return __ffz_word(0, word); + * Returns the bit number of the most significant bit set, + * where the most significant bit has bit number 0. + * If no bit is set this function returns 64. + */ +static inline unsigned char __flogr(unsigned long word) +{ + if (__builtin_constant_p(word)) { + unsigned long bit = 0; + + if (!word) + return 64; + if (!(word & 0xffffffff00000000UL)) { + word <<= 32; + bit += 32; + } + if (!(word & 0xffff000000000000UL)) { + word <<= 16; + bit += 16; + } + if (!(word & 0xff00000000000000UL)) { + word <<= 8; + bit += 8; + } + if (!(word & 0xf000000000000000UL)) { + word <<= 4; + bit += 4; + } + if (!(word & 0xc000000000000000UL)) { + word <<= 2; + bit += 2; + } + if (!(word & 0x8000000000000000UL)) { + word <<= 1; + bit += 1; + } + return bit; + } else { + register unsigned long bit asm("4") = word; + register unsigned long out asm("5"); + + asm volatile( + " flogr %[bit],%[bit]\n" + : [bit] "+d" (bit), [out] "=d" (out) : : "cc"); + return bit; + } } /** @@ -573,337 +395,83 @@ static inline unsigned long ffz(unsigned long word) * * Undefined if no bit exists, so code should check against 0 first. */ -static inline unsigned long __ffs (unsigned long word) +static inline unsigned long __ffs(unsigned long word) { - return __ffs_word(0, word); + return __flogr(-word & word) ^ (BITS_PER_LONG - 1); } /** * ffs - find first bit set - * @x: the word to search + * @word: the word to search * - * This is defined the same way as - * the libc and compiler builtin ffs routines, therefore - * differs in spirit from the above ffz (man ffs). + * This is defined the same way as the libc and + * compiler builtin ffs routines (man ffs). */ -static inline int ffs(int x) +static inline int ffs(int word) { - if (!x) - return 0; - return __ffs_word(1, x); + unsigned long mask = 2 * BITS_PER_LONG - 1; + unsigned int val = (unsigned int)word; + + return (1 + (__flogr(-val & val) ^ (BITS_PER_LONG - 1))) & mask; } /** - * find_first_zero_bit - find the first zero bit in a memory region - * @addr: The address to start the search at - * @size: The maximum size to search + * __fls - find last (most-significant) set bit in a long word + * @word: the word to search * - * Returns the bit-number of the first zero bit, not the number of the byte - * containing a bit. + * Undefined if no set bit exists, so code should check against 0 first. */ -static inline unsigned long find_first_zero_bit(const unsigned long *addr, - unsigned long size) +static inline unsigned long __fls(unsigned long word) { - unsigned long bytes, bits; - - if (!size) - return 0; - bytes = __ffz_word_loop(addr, size); - bits = __ffz_word(bytes*8, __load_ulong_be(addr, bytes)); - return (bits < size) ? bits : size; + return __flogr(word) ^ (BITS_PER_LONG - 1); } -#define find_first_zero_bit find_first_zero_bit /** - * find_first_bit - find the first set bit in a memory region - * @addr: The address to start the search at - * @size: The maximum size to search + * fls64 - find last set bit in a 64-bit word + * @word: the word to search * - * Returns the bit-number of the first set bit, not the number of the byte - * containing a bit. - */ -static inline unsigned long find_first_bit(const unsigned long * addr, - unsigned long size) -{ - unsigned long bytes, bits; - - if (!size) - return 0; - bytes = __ffs_word_loop(addr, size); - bits = __ffs_word(bytes*8, __load_ulong_be(addr, bytes)); - return (bits < size) ? bits : size; -} -#define find_first_bit find_first_bit - -/* - * Big endian variant whichs starts bit counting from left using - * the flogr (find leftmost one) instruction. - */ -static inline unsigned long __flo_word(unsigned long nr, unsigned long val) -{ - register unsigned long bit asm("2") = val; - register unsigned long out asm("3"); - - asm volatile ( - " .insn rre,0xb9830000,%[bit],%[bit]\n" - : [bit] "+d" (bit), [out] "=d" (out) : : "cc"); - return nr + bit; -} - -/* - * 64 bit special left bitops format: - * order in memory: - * 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f - * 10 11 12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f - * 20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f - * 30 31 32 33 34 35 36 37 38 39 3a 3b 3c 3d 3e 3f - * after that follows the next long with bit numbers - * 40 41 42 43 44 45 46 47 48 49 4a 4b 4c 4d 4e 4f - * 50 51 52 53 54 55 56 57 58 59 5a 5b 5c 5d 5e 5f - * 60 61 62 63 64 65 66 67 68 69 6a 6b 6c 6d 6e 6f - * 70 71 72 73 74 75 76 77 78 79 7a 7b 7c 7d 7e 7f - * The reason for this bit ordering is the fact that - * the hardware sets bits in a bitmap starting at bit 0 - * and we don't want to scan the bitmap from the 'wrong - * end'. + * This is defined in a similar way as the libc and compiler builtin + * ffsll, but returns the position of the most significant set bit. + * + * fls64(value) returns 0 if value is 0 or the position of the last + * set bit if value is nonzero. The last (most significant) bit is + * at position 64. */ -static inline unsigned long find_first_bit_left(const unsigned long *addr, - unsigned long size) -{ - unsigned long bytes, bits; - - if (!size) - return 0; - bytes = __ffs_word_loop(addr, size); - bits = __flo_word(bytes * 8, __load_ulong_be(addr, bytes)); - return (bits < size) ? bits : size; -} - -static inline int find_next_bit_left(const unsigned long *addr, - unsigned long size, - unsigned long offset) +static inline int fls64(unsigned long word) { - const unsigned long *p; - unsigned long bit, set; - - if (offset >= size) - return size; - bit = offset & (BITS_PER_LONG - 1); - offset -= bit; - size -= offset; - p = addr + offset / BITS_PER_LONG; - if (bit) { - set = __flo_word(0, *p & (~0UL >> bit)); - if (set >= size) - return size + offset; - if (set < BITS_PER_LONG) - return set + offset; - offset += BITS_PER_LONG; - size -= BITS_PER_LONG; - p++; - } - return offset + find_first_bit_left(p, size); -} - -#define for_each_set_bit_left(bit, addr, size) \ - for ((bit) = find_first_bit_left((addr), (size)); \ - (bit) < (size); \ - (bit) = find_next_bit_left((addr), (size), (bit) + 1)) - -/* same as for_each_set_bit() but use bit as value to start with */ -#define for_each_set_bit_left_cont(bit, addr, size) \ - for ((bit) = find_next_bit_left((addr), (size), (bit)); \ - (bit) < (size); \ - (bit) = find_next_bit_left((addr), (size), (bit) + 1)) + unsigned long mask = 2 * BITS_PER_LONG - 1; -/** - * find_next_zero_bit - find the first zero bit in a memory region - * @addr: The address to base the search on - * @offset: The bitnumber to start searching at - * @size: The maximum size to search - */ -static inline int find_next_zero_bit (const unsigned long * addr, - unsigned long size, - unsigned long offset) -{ - const unsigned long *p; - unsigned long bit, set; - - if (offset >= size) - return size; - bit = offset & (BITS_PER_LONG - 1); - offset -= bit; - size -= offset; - p = addr + offset / BITS_PER_LONG; - if (bit) { - /* - * __ffz_word returns BITS_PER_LONG - * if no zero bit is present in the word. - */ - set = __ffz_word(bit, *p >> bit); - if (set >= size) - return size + offset; - if (set < BITS_PER_LONG) - return set + offset; - offset += BITS_PER_LONG; - size -= BITS_PER_LONG; - p++; - } - return offset + find_first_zero_bit(p, size); + return (1 + (__flogr(word) ^ (BITS_PER_LONG - 1))) & mask; } -#define find_next_zero_bit find_next_zero_bit /** - * find_next_bit - find the first set bit in a memory region - * @addr: The address to base the search on - * @offset: The bitnumber to start searching at - * @size: The maximum size to search + * fls - find last (most-significant) bit set + * @word: the word to search + * + * This is defined the same way as ffs. + * Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32. */ -static inline int find_next_bit (const unsigned long * addr, - unsigned long size, - unsigned long offset) +static inline int fls(int word) { - const unsigned long *p; - unsigned long bit, set; - - if (offset >= size) - return size; - bit = offset & (BITS_PER_LONG - 1); - offset -= bit; - size -= offset; - p = addr + offset / BITS_PER_LONG; - if (bit) { - /* - * __ffs_word returns BITS_PER_LONG - * if no one bit is present in the word. - */ - set = __ffs_word(0, *p & (~0UL << bit)); - if (set >= size) - return size + offset; - if (set < BITS_PER_LONG) - return set + offset; - offset += BITS_PER_LONG; - size -= BITS_PER_LONG; - p++; - } - return offset + find_first_bit(p, size); + return fls64((unsigned int)word); } -#define find_next_bit find_next_bit -/* - * Every architecture must define this function. It's the fastest - * way of searching a 140-bit bitmap where the first 100 bits are - * unlikely to be set. It's guaranteed that at least one of the 140 - * bits is cleared. - */ -static inline int sched_find_first_bit(unsigned long *b) -{ - return find_first_bit(b, 140); -} +#else /* CONFIG_HAVE_MARCH_Z9_109_FEATURES */ -#include <asm-generic/bitops/fls.h> +#include <asm-generic/bitops/__ffs.h> +#include <asm-generic/bitops/ffs.h> #include <asm-generic/bitops/__fls.h> +#include <asm-generic/bitops/fls.h> #include <asm-generic/bitops/fls64.h> +#endif /* CONFIG_HAVE_MARCH_Z9_109_FEATURES */ + +#include <asm-generic/bitops/ffz.h> +#include <asm-generic/bitops/find.h> #include <asm-generic/bitops/hweight.h> #include <asm-generic/bitops/lock.h> - -/* - * ATTENTION: intel byte ordering convention for ext2 and minix !! - * bit 0 is the LSB of addr; bit 31 is the MSB of addr; - * bit 32 is the LSB of (addr+4). - * That combined with the little endian byte order of Intel gives the - * following bit order in memory: - * 07 06 05 04 03 02 01 00 15 14 13 12 11 10 09 08 \ - * 23 22 21 20 19 18 17 16 31 30 29 28 27 26 25 24 - */ - -static inline int find_first_zero_bit_le(void *vaddr, unsigned int size) -{ - unsigned long bytes, bits; - - if (!size) - return 0; - bytes = __ffz_word_loop(vaddr, size); - bits = __ffz_word(bytes*8, __load_ulong_le(vaddr, bytes)); - return (bits < size) ? bits : size; -} -#define find_first_zero_bit_le find_first_zero_bit_le - -static inline int find_next_zero_bit_le(void *vaddr, unsigned long size, - unsigned long offset) -{ - unsigned long *addr = vaddr, *p; - unsigned long bit, set; - - if (offset >= size) - return size; - bit = offset & (BITS_PER_LONG - 1); - offset -= bit; - size -= offset; - p = addr + offset / BITS_PER_LONG; - if (bit) { - /* - * s390 version of ffz returns BITS_PER_LONG - * if no zero bit is present in the word. - */ - set = __ffz_word(bit, __load_ulong_le(p, 0) >> bit); - if (set >= size) - return size + offset; - if (set < BITS_PER_LONG) - return set + offset; - offset += BITS_PER_LONG; - size -= BITS_PER_LONG; - p++; - } - return offset + find_first_zero_bit_le(p, size); -} -#define find_next_zero_bit_le find_next_zero_bit_le - -static inline unsigned long find_first_bit_le(void *vaddr, unsigned long size) -{ - unsigned long bytes, bits; - - if (!size) - return 0; - bytes = __ffs_word_loop(vaddr, size); - bits = __ffs_word(bytes*8, __load_ulong_le(vaddr, bytes)); - return (bits < size) ? bits : size; -} -#define find_first_bit_le find_first_bit_le - -static inline int find_next_bit_le(void *vaddr, unsigned long size, - unsigned long offset) -{ - unsigned long *addr = vaddr, *p; - unsigned long bit, set; - - if (offset >= size) - return size; - bit = offset & (BITS_PER_LONG - 1); - offset -= bit; - size -= offset; - p = addr + offset / BITS_PER_LONG; - if (bit) { - /* - * s390 version of ffz returns BITS_PER_LONG - * if no zero bit is present in the word. - */ - set = __ffs_word(0, __load_ulong_le(p, 0) & (~0UL << bit)); - if (set >= size) - return size + offset; - if (set < BITS_PER_LONG) - return set + offset; - offset += BITS_PER_LONG; - size -= BITS_PER_LONG; - p++; - } - return offset + find_first_bit_le(p, size); -} -#define find_next_bit_le find_next_bit_le - +#include <asm-generic/bitops/sched.h> #include <asm-generic/bitops/le.h> - #include <asm-generic/bitops/ext2-atomic-setbit.h> #endif /* _S390_BITOPS_H */ diff --git a/arch/s390/include/asm/compat.h b/arch/s390/include/asm/compat.h index c1e7c646727..4bf9da03591 100644 --- a/arch/s390/include/asm/compat.h +++ b/arch/s390/include/asm/compat.h @@ -22,6 +22,7 @@ #define PSW32_MASK_ASC 0x0000C000UL #define PSW32_MASK_CC 0x00003000UL #define PSW32_MASK_PM 0x00000f00UL +#define PSW32_MASK_RI 0x00000080UL #define PSW32_MASK_USER 0x0000FF00UL @@ -35,7 +36,9 @@ #define PSW32_ASC_SECONDARY 0x00008000UL #define PSW32_ASC_HOME 0x0000C000UL -extern u32 psw32_user_bits; +#define PSW32_USER_BITS (PSW32_MASK_DAT | PSW32_MASK_IO | PSW32_MASK_EXT | \ + PSW32_DEFAULT_KEY | PSW32_MASK_BASE | \ + PSW32_MASK_MCHECK | PSW32_MASK_PSTATE | PSW32_ASC_HOME) #define COMPAT_USER_HZ 100 #define COMPAT_UTS_MACHINE "s390\0\0\0\0" diff --git a/arch/s390/include/asm/ctl_reg.h b/arch/s390/include/asm/ctl_reg.h index debfda33d1f..9b69c0befdc 100644 --- a/arch/s390/include/asm/ctl_reg.h +++ b/arch/s390/include/asm/ctl_reg.h @@ -8,69 +8,59 @@ #define __ASM_CTL_REG_H #ifdef CONFIG_64BIT - -#define __ctl_load(array, low, high) ({ \ - typedef struct { char _[sizeof(array)]; } addrtype; \ - asm volatile( \ - " lctlg %1,%2,%0\n" \ - : : "Q" (*(addrtype *)(&array)), \ - "i" (low), "i" (high)); \ - }) - -#define __ctl_store(array, low, high) ({ \ - typedef struct { char _[sizeof(array)]; } addrtype; \ - asm volatile( \ - " stctg %1,%2,%0\n" \ - : "=Q" (*(addrtype *)(&array)) \ - : "i" (low), "i" (high)); \ - }) - -#else /* CONFIG_64BIT */ - -#define __ctl_load(array, low, high) ({ \ - typedef struct { char _[sizeof(array)]; } addrtype; \ - asm volatile( \ - " lctl %1,%2,%0\n" \ - : : "Q" (*(addrtype *)(&array)), \ - "i" (low), "i" (high)); \ -}) - -#define __ctl_store(array, low, high) ({ \ - typedef struct { char _[sizeof(array)]; } addrtype; \ - asm volatile( \ - " stctl %1,%2,%0\n" \ - : "=Q" (*(addrtype *)(&array)) \ - : "i" (low), "i" (high)); \ - }) - -#endif /* CONFIG_64BIT */ - -#define __ctl_set_bit(cr, bit) ({ \ - unsigned long __dummy; \ - __ctl_store(__dummy, cr, cr); \ - __dummy |= 1UL << (bit); \ - __ctl_load(__dummy, cr, cr); \ -}) - -#define __ctl_clear_bit(cr, bit) ({ \ - unsigned long __dummy; \ - __ctl_store(__dummy, cr, cr); \ - __dummy &= ~(1UL << (bit)); \ - __ctl_load(__dummy, cr, cr); \ -}) +# define __CTL_LOAD "lctlg" +# define __CTL_STORE "stctg" +#else +# define __CTL_LOAD "lctl" +# define __CTL_STORE "stctl" +#endif + +#define __ctl_load(array, low, high) { \ + typedef struct { char _[sizeof(array)]; } addrtype; \ + \ + BUILD_BUG_ON(sizeof(addrtype) != (high - low + 1) * sizeof(long));\ + asm volatile( \ + __CTL_LOAD " %1,%2,%0\n" \ + : : "Q" (*(addrtype *)(&array)), "i" (low), "i" (high));\ +} + +#define __ctl_store(array, low, high) { \ + typedef struct { char _[sizeof(array)]; } addrtype; \ + \ + BUILD_BUG_ON(sizeof(addrtype) != (high - low + 1) * sizeof(long));\ + asm volatile( \ + __CTL_STORE " %1,%2,%0\n" \ + : "=Q" (*(addrtype *)(&array)) \ + : "i" (low), "i" (high)); \ +} + +static inline void __ctl_set_bit(unsigned int cr, unsigned int bit) +{ + unsigned long reg; + + __ctl_store(reg, cr, cr); + reg |= 1UL << bit; + __ctl_load(reg, cr, cr); +} + +static inline void __ctl_clear_bit(unsigned int cr, unsigned int bit) +{ + unsigned long reg; + + __ctl_store(reg, cr, cr); + reg &= ~(1UL << bit); + __ctl_load(reg, cr, cr); +} + +void smp_ctl_set_bit(int cr, int bit); +void smp_ctl_clear_bit(int cr, int bit); #ifdef CONFIG_SMP - -extern void smp_ctl_set_bit(int cr, int bit); -extern void smp_ctl_clear_bit(int cr, int bit); -#define ctl_set_bit(cr, bit) smp_ctl_set_bit(cr, bit) -#define ctl_clear_bit(cr, bit) smp_ctl_clear_bit(cr, bit) - +# define ctl_set_bit(cr, bit) smp_ctl_set_bit(cr, bit) +# define ctl_clear_bit(cr, bit) smp_ctl_clear_bit(cr, bit) #else - -#define ctl_set_bit(cr, bit) __ctl_set_bit(cr, bit) -#define ctl_clear_bit(cr, bit) __ctl_clear_bit(cr, bit) - -#endif /* CONFIG_SMP */ +# define ctl_set_bit(cr, bit) __ctl_set_bit(cr, bit) +# define ctl_clear_bit(cr, bit) __ctl_clear_bit(cr, bit) +#endif #endif /* __ASM_CTL_REG_H */ diff --git a/arch/s390/include/asm/debug.h b/arch/s390/include/asm/debug.h index 188c5052a20..530c15eb01e 100644 --- a/arch/s390/include/asm/debug.h +++ b/arch/s390/include/asm/debug.h @@ -107,6 +107,11 @@ void debug_set_level(debug_info_t* id, int new_level); void debug_set_critical(void); void debug_stop_all(void); +static inline bool debug_level_enabled(debug_info_t* id, int level) +{ + return level <= id->level; +} + static inline debug_entry_t* debug_event(debug_info_t* id, int level, void* data, int length) { diff --git a/arch/s390/include/asm/dis.h b/arch/s390/include/asm/dis.h new file mode 100644 index 00000000000..04a83f5773c --- /dev/null +++ b/arch/s390/include/asm/dis.h @@ -0,0 +1,52 @@ +/* + * Disassemble s390 instructions. + * + * Copyright IBM Corp. 2007 + * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com), + */ + +#ifndef __ASM_S390_DIS_H__ +#define __ASM_S390_DIS_H__ + +/* Type of operand */ +#define OPERAND_GPR 0x1 /* Operand printed as %rx */ +#define OPERAND_FPR 0x2 /* Operand printed as %fx */ +#define OPERAND_AR 0x4 /* Operand printed as %ax */ +#define OPERAND_CR 0x8 /* Operand printed as %cx */ +#define OPERAND_DISP 0x10 /* Operand printed as displacement */ +#define OPERAND_BASE 0x20 /* Operand printed as base register */ +#define OPERAND_INDEX 0x40 /* Operand printed as index register */ +#define OPERAND_PCREL 0x80 /* Operand printed as pc-relative symbol */ +#define OPERAND_SIGNED 0x100 /* Operand printed as signed value */ +#define OPERAND_LENGTH 0x200 /* Operand printed as length (+1) */ + + +struct s390_operand { + int bits; /* The number of bits in the operand. */ + int shift; /* The number of bits to shift. */ + int flags; /* One bit syntax flags. */ +}; + +struct s390_insn { + const char name[5]; + unsigned char opfrag; + unsigned char format; +}; + + +static inline int insn_length(unsigned char code) +{ + return ((((int) code + 64) >> 7) + 1) << 1; +} + +void show_code(struct pt_regs *regs); +void print_fn_code(unsigned char *code, unsigned long len); +int insn_to_mnemonic(unsigned char *instruction, char *buf, unsigned int len); +struct s390_insn *find_insn(unsigned char *code); + +static inline int is_known_insn(unsigned char *code) +{ + return !!find_insn(code); +} + +#endif /* __ASM_S390_DIS_H__ */ diff --git a/arch/s390/include/asm/fcx.h b/arch/s390/include/asm/fcx.h index ef617099507..7ecb92b469b 100644 --- a/arch/s390/include/asm/fcx.h +++ b/arch/s390/include/asm/fcx.h @@ -12,9 +12,9 @@ #define TCW_FORMAT_DEFAULT 0 #define TCW_TIDAW_FORMAT_DEFAULT 0 -#define TCW_FLAGS_INPUT_TIDA 1 << (23 - 5) -#define TCW_FLAGS_TCCB_TIDA 1 << (23 - 6) -#define TCW_FLAGS_OUTPUT_TIDA 1 << (23 - 7) +#define TCW_FLAGS_INPUT_TIDA (1 << (23 - 5)) +#define TCW_FLAGS_TCCB_TIDA (1 << (23 - 6)) +#define TCW_FLAGS_OUTPUT_TIDA (1 << (23 - 7)) #define TCW_FLAGS_TIDAW_FORMAT(x) ((x) & 3) << (23 - 9) #define TCW_FLAGS_GET_TIDAW_FORMAT(x) (((x) >> (23 - 9)) & 3) @@ -54,11 +54,11 @@ struct tcw { u32 intrg; } __attribute__ ((packed, aligned(64))); -#define TIDAW_FLAGS_LAST 1 << (7 - 0) -#define TIDAW_FLAGS_SKIP 1 << (7 - 1) -#define TIDAW_FLAGS_DATA_INT 1 << (7 - 2) -#define TIDAW_FLAGS_TTIC 1 << (7 - 3) -#define TIDAW_FLAGS_INSERT_CBC 1 << (7 - 4) +#define TIDAW_FLAGS_LAST (1 << (7 - 0)) +#define TIDAW_FLAGS_SKIP (1 << (7 - 1)) +#define TIDAW_FLAGS_DATA_INT (1 << (7 - 2)) +#define TIDAW_FLAGS_TTIC (1 << (7 - 3)) +#define TIDAW_FLAGS_INSERT_CBC (1 << (7 - 4)) /** * struct tidaw - Transport-Indirect-Addressing Word (TIDAW) @@ -106,9 +106,9 @@ struct tsa_ddpc { u8 sense[32]; } __attribute__ ((packed)); -#define TSA_INTRG_FLAGS_CU_STATE_VALID 1 << (7 - 0) -#define TSA_INTRG_FLAGS_DEV_STATE_VALID 1 << (7 - 1) -#define TSA_INTRG_FLAGS_OP_STATE_VALID 1 << (7 - 2) +#define TSA_INTRG_FLAGS_CU_STATE_VALID (1 << (7 - 0)) +#define TSA_INTRG_FLAGS_DEV_STATE_VALID (1 << (7 - 1)) +#define TSA_INTRG_FLAGS_OP_STATE_VALID (1 << (7 - 2)) /** * struct tsa_intrg - Interrogate Transport-Status Area (Intrg. TSA) @@ -140,10 +140,10 @@ struct tsa_intrg { #define TSB_FORMAT_DDPC 2 #define TSB_FORMAT_INTRG 3 -#define TSB_FLAGS_DCW_OFFSET_VALID 1 << (7 - 0) -#define TSB_FLAGS_COUNT_VALID 1 << (7 - 1) -#define TSB_FLAGS_CACHE_MISS 1 << (7 - 2) -#define TSB_FLAGS_TIME_VALID 1 << (7 - 3) +#define TSB_FLAGS_DCW_OFFSET_VALID (1 << (7 - 0)) +#define TSB_FLAGS_COUNT_VALID (1 << (7 - 1)) +#define TSB_FLAGS_CACHE_MISS (1 << (7 - 2)) +#define TSB_FLAGS_TIME_VALID (1 << (7 - 3)) #define TSB_FLAGS_FORMAT(x) ((x) & 7) #define TSB_FORMAT(t) ((t)->flags & 7) @@ -179,9 +179,9 @@ struct tsb { #define DCW_INTRG_RCQ_PRIMARY 1 #define DCW_INTRG_RCQ_SECONDARY 2 -#define DCW_INTRG_FLAGS_MPM 1 < (7 - 0) -#define DCW_INTRG_FLAGS_PPR 1 < (7 - 1) -#define DCW_INTRG_FLAGS_CRIT 1 < (7 - 2) +#define DCW_INTRG_FLAGS_MPM (1 << (7 - 0)) +#define DCW_INTRG_FLAGS_PPR (1 << (7 - 1)) +#define DCW_INTRG_FLAGS_CRIT (1 << (7 - 2)) /** * struct dcw_intrg_data - Interrogate DCW data @@ -216,7 +216,7 @@ struct dcw_intrg_data { u8 prog_data[0]; } __attribute__ ((packed)); -#define DCW_FLAGS_CC 1 << (7 - 1) +#define DCW_FLAGS_CC (1 << (7 - 1)) #define DCW_CMD_WRITE 0x01 #define DCW_CMD_READ 0x02 diff --git a/arch/s390/include/asm/ipl.h b/arch/s390/include/asm/ipl.h index 2bd6cb897b9..2fcccc0c997 100644 --- a/arch/s390/include/asm/ipl.h +++ b/arch/s390/include/asm/ipl.h @@ -7,6 +7,7 @@ #ifndef _ASM_S390_IPL_H #define _ASM_S390_IPL_H +#include <asm/lowcore.h> #include <asm/types.h> #include <asm/cio.h> #include <asm/setup.h> @@ -86,7 +87,14 @@ struct ipl_parameter_block { */ extern u32 ipl_flags; extern u32 dump_prefix_page; -extern unsigned int zfcpdump_prefix_array[]; + +struct dump_save_areas { + struct save_area **areas; + int count; +}; + +extern struct dump_save_areas dump_save_areas; +struct save_area *dump_save_area_create(int cpu); extern void do_reipl(void); extern void do_halt(void); diff --git a/arch/s390/include/asm/mmu_context.h b/arch/s390/include/asm/mmu_context.h index 9f973d8de90..5d1f950704d 100644 --- a/arch/s390/include/asm/mmu_context.h +++ b/arch/s390/include/asm/mmu_context.h @@ -40,14 +40,8 @@ static inline void update_mm(struct mm_struct *mm, struct task_struct *tsk) pgd_t *pgd = mm->pgd; S390_lowcore.user_asce = mm->context.asce_bits | __pa(pgd); - if (s390_user_mode != HOME_SPACE_MODE) { - /* Load primary space page table origin. */ - asm volatile(LCTL_OPCODE" 1,1,%0\n" - : : "m" (S390_lowcore.user_asce) ); - } else - /* Load home space page table origin. */ - asm volatile(LCTL_OPCODE" 13,13,%0" - : : "m" (S390_lowcore.user_asce) ); + /* Load primary space page table origin. */ + asm volatile(LCTL_OPCODE" 1,1,%0\n" : : "m" (S390_lowcore.user_asce)); set_fs(current->thread.mm_segment); } diff --git a/arch/s390/include/asm/page.h b/arch/s390/include/asm/page.h index 1e51f2915b2..316c8503a3b 100644 --- a/arch/s390/include/asm/page.h +++ b/arch/s390/include/asm/page.h @@ -30,7 +30,12 @@ #include <asm/setup.h> #ifndef __ASSEMBLY__ -void storage_key_init_range(unsigned long start, unsigned long end); +static inline void storage_key_init_range(unsigned long start, unsigned long end) +{ +#if PAGE_DEFAULT_KEY + __storage_key_init_range(start, end); +#endif +} static inline void clear_page(void *page) { diff --git a/arch/s390/include/asm/pci_debug.h b/arch/s390/include/asm/pci_debug.h index 1ca5d1047c7..ac24b26fc06 100644 --- a/arch/s390/include/asm/pci_debug.h +++ b/arch/s390/include/asm/pci_debug.h @@ -6,14 +6,9 @@ extern debug_info_t *pci_debug_msg_id; extern debug_info_t *pci_debug_err_id; -#ifdef CONFIG_PCI_DEBUG #define zpci_dbg(imp, fmt, args...) \ debug_sprintf_event(pci_debug_msg_id, imp, fmt, ##args) -#else /* !CONFIG_PCI_DEBUG */ -#define zpci_dbg(imp, fmt, args...) do { } while (0) -#endif - #define zpci_err(text...) \ do { \ char debug_buffer[16]; \ diff --git a/arch/s390/include/asm/pci_insn.h b/arch/s390/include/asm/pci_insn.h index df6eac9f0cb..649eb62c52b 100644 --- a/arch/s390/include/asm/pci_insn.h +++ b/arch/s390/include/asm/pci_insn.h @@ -54,11 +54,9 @@ struct zpci_fib { u32 fmt : 8; /* format */ u32 : 24; - u32 reserved1; + u32 : 32; u8 fc; /* function controls */ - u8 reserved2; - u16 reserved3; - u32 reserved4; + u64 : 56; u64 pba; /* PCI base address */ u64 pal; /* PCI address limit */ u64 iota; /* I/O Translation Anchor */ @@ -70,14 +68,13 @@ struct zpci_fib { u32 sum : 1; /* Adapter int summary bit enabled */ u32 : 1; u32 aisbo : 6; /* Adapter int summary bit offset */ - u32 reserved5; + u32 : 32; u64 aibv; /* Adapter int bit vector address */ u64 aisb; /* Adapter int summary bit address */ u64 fmb_addr; /* Function measurement block address and key */ - u64 reserved6; - u64 reserved7; -} __packed; - + u32 : 32; + u32 gd; +} __packed __aligned(8); int zpci_mod_fc(u64 req, struct zpci_fib *fib); int zpci_refresh_trans(u64 fn, u64 addr, u64 range); diff --git a/arch/s390/include/asm/percpu.h b/arch/s390/include/asm/percpu.h index 86fe0ee2cee..fa91e009745 100644 --- a/arch/s390/include/asm/percpu.h +++ b/arch/s390/include/asm/percpu.h @@ -10,16 +10,22 @@ */ #define __my_cpu_offset S390_lowcore.percpu_offset +#ifdef CONFIG_64BIT + /* * For 64 bit module code, the module may be more than 4G above the * per cpu area, use weak definitions to force the compiler to * generate external references. */ -#if defined(CONFIG_SMP) && defined(CONFIG_64BIT) && defined(MODULE) +#if defined(CONFIG_SMP) && defined(MODULE) #define ARCH_NEEDS_WEAK_PER_CPU #endif -#define arch_this_cpu_to_op(pcp, val, op) \ +/* + * We use a compare-and-swap loop since that uses less cpu cycles than + * disabling and enabling interrupts like the generic variant would do. + */ +#define arch_this_cpu_to_op_simple(pcp, val, op) \ ({ \ typedef typeof(pcp) pcp_op_T__; \ pcp_op_T__ old__, new__, prev__; \ @@ -30,42 +36,101 @@ do { \ old__ = prev__; \ new__ = old__ op (val); \ - switch (sizeof(*ptr__)) { \ - case 8: \ - prev__ = cmpxchg64(ptr__, old__, new__); \ - break; \ - default: \ - prev__ = cmpxchg(ptr__, old__, new__); \ - } \ + prev__ = cmpxchg(ptr__, old__, new__); \ } while (prev__ != old__); \ preempt_enable(); \ new__; \ }) -#define this_cpu_add_1(pcp, val) arch_this_cpu_to_op(pcp, val, +) -#define this_cpu_add_2(pcp, val) arch_this_cpu_to_op(pcp, val, +) -#define this_cpu_add_4(pcp, val) arch_this_cpu_to_op(pcp, val, +) -#define this_cpu_add_8(pcp, val) arch_this_cpu_to_op(pcp, val, +) +#define this_cpu_add_1(pcp, val) arch_this_cpu_to_op_simple(pcp, val, +) +#define this_cpu_add_2(pcp, val) arch_this_cpu_to_op_simple(pcp, val, +) +#define this_cpu_add_return_1(pcp, val) arch_this_cpu_to_op_simple(pcp, val, +) +#define this_cpu_add_return_2(pcp, val) arch_this_cpu_to_op_simple(pcp, val, +) +#define this_cpu_and_1(pcp, val) arch_this_cpu_to_op_simple(pcp, val, &) +#define this_cpu_and_2(pcp, val) arch_this_cpu_to_op_simple(pcp, val, &) +#define this_cpu_or_1(pcp, val) arch_this_cpu_to_op_simple(pcp, val, |) +#define this_cpu_or_2(pcp, val) arch_this_cpu_to_op_simple(pcp, val, |) + +#ifndef CONFIG_HAVE_MARCH_Z196_FEATURES + +#define this_cpu_add_4(pcp, val) arch_this_cpu_to_op_simple(pcp, val, +) +#define this_cpu_add_8(pcp, val) arch_this_cpu_to_op_simple(pcp, val, +) +#define this_cpu_add_return_4(pcp, val) arch_this_cpu_to_op_simple(pcp, val, +) +#define this_cpu_add_return_8(pcp, val) arch_this_cpu_to_op_simple(pcp, val, +) +#define this_cpu_and_4(pcp, val) arch_this_cpu_to_op_simple(pcp, val, &) +#define this_cpu_and_8(pcp, val) arch_this_cpu_to_op_simple(pcp, val, &) +#define this_cpu_or_4(pcp, val) arch_this_cpu_to_op_simple(pcp, val, |) +#define this_cpu_or_8(pcp, val) arch_this_cpu_to_op_simple(pcp, val, |) + +#else /* CONFIG_HAVE_MARCH_Z196_FEATURES */ + +#define arch_this_cpu_add(pcp, val, op1, op2, szcast) \ +{ \ + typedef typeof(pcp) pcp_op_T__; \ + pcp_op_T__ val__ = (val); \ + pcp_op_T__ old__, *ptr__; \ + preempt_disable(); \ + ptr__ = __this_cpu_ptr(&(pcp)); \ + if (__builtin_constant_p(val__) && \ + ((szcast)val__ > -129) && ((szcast)val__ < 128)) { \ + asm volatile( \ + op2 " %[ptr__],%[val__]\n" \ + : [ptr__] "+Q" (*ptr__) \ + : [val__] "i" ((szcast)val__) \ + : "cc"); \ + } else { \ + asm volatile( \ + op1 " %[old__],%[val__],%[ptr__]\n" \ + : [old__] "=d" (old__), [ptr__] "+Q" (*ptr__) \ + : [val__] "d" (val__) \ + : "cc"); \ + } \ + preempt_enable(); \ +} -#define this_cpu_add_return_1(pcp, val) arch_this_cpu_to_op(pcp, val, +) -#define this_cpu_add_return_2(pcp, val) arch_this_cpu_to_op(pcp, val, +) -#define this_cpu_add_return_4(pcp, val) arch_this_cpu_to_op(pcp, val, +) -#define this_cpu_add_return_8(pcp, val) arch_this_cpu_to_op(pcp, val, +) +#define this_cpu_add_4(pcp, val) arch_this_cpu_add(pcp, val, "laa", "asi", int) +#define this_cpu_add_8(pcp, val) arch_this_cpu_add(pcp, val, "laag", "agsi", long) -#define this_cpu_and_1(pcp, val) arch_this_cpu_to_op(pcp, val, &) -#define this_cpu_and_2(pcp, val) arch_this_cpu_to_op(pcp, val, &) -#define this_cpu_and_4(pcp, val) arch_this_cpu_to_op(pcp, val, &) -#define this_cpu_and_8(pcp, val) arch_this_cpu_to_op(pcp, val, &) +#define arch_this_cpu_add_return(pcp, val, op) \ +({ \ + typedef typeof(pcp) pcp_op_T__; \ + pcp_op_T__ val__ = (val); \ + pcp_op_T__ old__, *ptr__; \ + preempt_disable(); \ + ptr__ = __this_cpu_ptr(&(pcp)); \ + asm volatile( \ + op " %[old__],%[val__],%[ptr__]\n" \ + : [old__] "=d" (old__), [ptr__] "+Q" (*ptr__) \ + : [val__] "d" (val__) \ + : "cc"); \ + preempt_enable(); \ + old__ + val__; \ +}) -#define this_cpu_or_1(pcp, val) arch_this_cpu_to_op(pcp, val, |) -#define this_cpu_or_2(pcp, val) arch_this_cpu_to_op(pcp, val, |) -#define this_cpu_or_4(pcp, val) arch_this_cpu_to_op(pcp, val, |) -#define this_cpu_or_8(pcp, val) arch_this_cpu_to_op(pcp, val, |) +#define this_cpu_add_return_4(pcp, val) arch_this_cpu_add_return(pcp, val, "laa") +#define this_cpu_add_return_8(pcp, val) arch_this_cpu_add_return(pcp, val, "laag") -#define this_cpu_xor_1(pcp, val) arch_this_cpu_to_op(pcp, val, ^) -#define this_cpu_xor_2(pcp, val) arch_this_cpu_to_op(pcp, val, ^) -#define this_cpu_xor_4(pcp, val) arch_this_cpu_to_op(pcp, val, ^) -#define this_cpu_xor_8(pcp, val) arch_this_cpu_to_op(pcp, val, ^) +#define arch_this_cpu_to_op(pcp, val, op) \ +{ \ + typedef typeof(pcp) pcp_op_T__; \ + pcp_op_T__ val__ = (val); \ + pcp_op_T__ old__, *ptr__; \ + preempt_disable(); \ + ptr__ = __this_cpu_ptr(&(pcp)); \ + asm volatile( \ + op " %[old__],%[val__],%[ptr__]\n" \ + : [old__] "=d" (old__), [ptr__] "+Q" (*ptr__) \ + : [val__] "d" (val__) \ + : "cc"); \ + preempt_enable(); \ +} + +#define this_cpu_and_4(pcp, val) arch_this_cpu_to_op(pcp, val, "lan") +#define this_cpu_and_8(pcp, val) arch_this_cpu_to_op(pcp, val, "lang") +#define this_cpu_or_4(pcp, val) arch_this_cpu_to_op(pcp, val, "lao") +#define this_cpu_or_8(pcp, val) arch_this_cpu_to_op(pcp, val, "laog") + +#endif /* CONFIG_HAVE_MARCH_Z196_FEATURES */ #define arch_this_cpu_cmpxchg(pcp, oval, nval) \ ({ \ @@ -74,13 +139,7 @@ pcp_op_T__ *ptr__; \ preempt_disable(); \ ptr__ = __this_cpu_ptr(&(pcp)); \ - switch (sizeof(*ptr__)) { \ - case 8: \ - ret__ = cmpxchg64(ptr__, oval, nval); \ - break; \ - default: \ - ret__ = cmpxchg(ptr__, oval, nval); \ - } \ + ret__ = cmpxchg(ptr__, oval, nval); \ preempt_enable(); \ ret__; \ }) @@ -104,9 +163,7 @@ #define this_cpu_xchg_1(pcp, nval) arch_this_cpu_xchg(pcp, nval) #define this_cpu_xchg_2(pcp, nval) arch_this_cpu_xchg(pcp, nval) #define this_cpu_xchg_4(pcp, nval) arch_this_cpu_xchg(pcp, nval) -#ifdef CONFIG_64BIT #define this_cpu_xchg_8(pcp, nval) arch_this_cpu_xchg(pcp, nval) -#endif #define arch_this_cpu_cmpxchg_double(pcp1, pcp2, o1, o2, n1, n2) \ ({ \ @@ -124,9 +181,9 @@ }) #define this_cpu_cmpxchg_double_4 arch_this_cpu_cmpxchg_double -#ifdef CONFIG_64BIT #define this_cpu_cmpxchg_double_8 arch_this_cpu_cmpxchg_double -#endif + +#endif /* CONFIG_64BIT */ #include <asm-generic/percpu.h> diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h index 9b60a36c348..2204400d0bd 100644 --- a/arch/s390/include/asm/pgtable.h +++ b/arch/s390/include/asm/pgtable.h @@ -748,7 +748,9 @@ static inline void pgste_set_key(pte_t *ptep, pgste_t pgste, pte_t entry) static inline void pgste_set_pte(pte_t *ptep, pte_t entry) { - if (!MACHINE_HAS_ESOP && (pte_val(entry) & _PAGE_WRITE)) { + if (!MACHINE_HAS_ESOP && + (pte_val(entry) & _PAGE_PRESENT) && + (pte_val(entry) & _PAGE_WRITE)) { /* * Without enhanced suppression-on-protection force * the dirty bit on for all writable ptes. diff --git a/arch/s390/include/asm/processor.h b/arch/s390/include/asm/processor.h index ca7821f0726..0a876bc543d 100644 --- a/arch/s390/include/asm/processor.h +++ b/arch/s390/include/asm/processor.h @@ -134,19 +134,17 @@ struct stack_frame { * Do necessary setup to start up a new thread. */ #define start_thread(regs, new_psw, new_stackp) do { \ - regs->psw.mask = psw_user_bits | PSW_MASK_EA | PSW_MASK_BA; \ + regs->psw.mask = PSW_USER_BITS | PSW_MASK_EA | PSW_MASK_BA; \ regs->psw.addr = new_psw | PSW_ADDR_AMODE; \ regs->gprs[15] = new_stackp; \ execve_tail(); \ } while (0) #define start_thread31(regs, new_psw, new_stackp) do { \ - regs->psw.mask = psw_user_bits | PSW_MASK_BA; \ + regs->psw.mask = PSW_USER_BITS | PSW_MASK_BA; \ regs->psw.addr = new_psw | PSW_ADDR_AMODE; \ regs->gprs[15] = new_stackp; \ - __tlb_flush_mm(current->mm); \ crst_table_downgrade(current->mm, 1UL << 31); \ - update_mm(current->mm, current); \ execve_tail(); \ } while (0) @@ -169,17 +167,15 @@ extern void release_thread(struct task_struct *); */ extern unsigned long thread_saved_pc(struct task_struct *t); -extern void show_code(struct pt_regs *regs); -extern void print_fn_code(unsigned char *code, unsigned long len); -extern int insn_to_mnemonic(unsigned char *instruction, char *buf, - unsigned int len); - unsigned long get_wchan(struct task_struct *p); #define task_pt_regs(tsk) ((struct pt_regs *) \ (task_stack_page(tsk) + THREAD_SIZE) - 1) #define KSTK_EIP(tsk) (task_pt_regs(tsk)->psw.addr) #define KSTK_ESP(tsk) (task_pt_regs(tsk)->gprs[15]) +/* Has task runtime instrumentation enabled ? */ +#define is_ri_task(tsk) (!!(tsk)->thread.ri_cb) + static inline unsigned short stap(void) { unsigned short cpu_address; @@ -348,9 +344,9 @@ __set_psw_mask(unsigned long mask) } #define local_mcck_enable() \ - __set_psw_mask(psw_kernel_bits | PSW_MASK_DAT | PSW_MASK_MCHECK) + __set_psw_mask(PSW_KERNEL_BITS | PSW_MASK_DAT | PSW_MASK_MCHECK) #define local_mcck_disable() \ - __set_psw_mask(psw_kernel_bits | PSW_MASK_DAT) + __set_psw_mask(PSW_KERNEL_BITS | PSW_MASK_DAT) /* * Basic Machine Check/Program Check Handler. diff --git a/arch/s390/include/asm/ptrace.h b/arch/s390/include/asm/ptrace.h index 52b56533c57..9c82cebddab 100644 --- a/arch/s390/include/asm/ptrace.h +++ b/arch/s390/include/asm/ptrace.h @@ -10,8 +10,11 @@ #ifndef __ASSEMBLY__ -extern long psw_kernel_bits; -extern long psw_user_bits; +#define PSW_KERNEL_BITS (PSW_DEFAULT_KEY | PSW_MASK_BASE | PSW_ASC_HOME | \ + PSW_MASK_EA | PSW_MASK_BA) +#define PSW_USER_BITS (PSW_MASK_DAT | PSW_MASK_IO | PSW_MASK_EXT | \ + PSW_DEFAULT_KEY | PSW_MASK_BASE | PSW_MASK_MCHECK | \ + PSW_MASK_PSTATE | PSW_ASC_PRIMARY) /* * The pt_regs struct defines the way the registers are stored on diff --git a/arch/s390/include/asm/setup.h b/arch/s390/include/asm/setup.h index 59880dbaf36..df802ee14af 100644 --- a/arch/s390/include/asm/setup.h +++ b/arch/s390/include/asm/setup.h @@ -48,13 +48,6 @@ void detect_memory_layout(struct mem_chunk chunk[], unsigned long maxsize); void create_mem_hole(struct mem_chunk mem_chunk[], unsigned long addr, unsigned long size); -#define PRIMARY_SPACE_MODE 0 -#define ACCESS_REGISTER_MODE 1 -#define SECONDARY_SPACE_MODE 2 -#define HOME_SPACE_MODE 3 - -extern unsigned int s390_user_mode; - /* * Machine features detected in head.S */ diff --git a/arch/s390/include/asm/smp.h b/arch/s390/include/asm/smp.h index b64f15c3b4c..ac9bed8e103 100644 --- a/arch/s390/include/asm/smp.h +++ b/arch/s390/include/asm/smp.h @@ -14,7 +14,6 @@ #define raw_smp_processor_id() (S390_lowcore.cpu_nr) extern struct mutex smp_cpu_state_mutex; -extern struct save_area *zfcpdump_save_areas[NR_CPUS + 1]; extern int __cpu_up(unsigned int cpu, struct task_struct *tidle); diff --git a/arch/s390/include/asm/switch_to.h b/arch/s390/include/asm/switch_to.h index 6dbd559763c..29c81f82705 100644 --- a/arch/s390/include/asm/switch_to.h +++ b/arch/s390/include/asm/switch_to.h @@ -13,58 +13,94 @@ extern struct task_struct *__switch_to(void *, void *); extern void update_cr_regs(struct task_struct *task); -static inline void save_fp_regs(s390_fp_regs *fpregs) +static inline int test_fp_ctl(u32 fpc) { + u32 orig_fpc; + int rc; + + if (!MACHINE_HAS_IEEE) + return 0; + asm volatile( - " std 0,%O0+8(%R0)\n" - " std 2,%O0+24(%R0)\n" - " std 4,%O0+40(%R0)\n" - " std 6,%O0+56(%R0)" - : "=Q" (*fpregs) : "Q" (*fpregs)); + " efpc %1\n" + " sfpc %2\n" + "0: sfpc %1\n" + " la %0,0\n" + "1:\n" + EX_TABLE(0b,1b) + : "=d" (rc), "=d" (orig_fpc) + : "d" (fpc), "0" (-EINVAL)); + return rc; +} + +static inline void save_fp_ctl(u32 *fpc) +{ if (!MACHINE_HAS_IEEE) return; + asm volatile( - " stfpc %0\n" - " std 1,%O0+16(%R0)\n" - " std 3,%O0+32(%R0)\n" - " std 5,%O0+48(%R0)\n" - " std 7,%O0+64(%R0)\n" - " std 8,%O0+72(%R0)\n" - " std 9,%O0+80(%R0)\n" - " std 10,%O0+88(%R0)\n" - " std 11,%O0+96(%R0)\n" - " std 12,%O0+104(%R0)\n" - " std 13,%O0+112(%R0)\n" - " std 14,%O0+120(%R0)\n" - " std 15,%O0+128(%R0)\n" - : "=Q" (*fpregs) : "Q" (*fpregs)); + " stfpc %0\n" + : "+Q" (*fpc)); } -static inline void restore_fp_regs(s390_fp_regs *fpregs) +static inline int restore_fp_ctl(u32 *fpc) { + int rc; + + if (!MACHINE_HAS_IEEE) + return 0; + asm volatile( - " ld 0,%O0+8(%R0)\n" - " ld 2,%O0+24(%R0)\n" - " ld 4,%O0+40(%R0)\n" - " ld 6,%O0+56(%R0)" - : : "Q" (*fpregs)); + "0: lfpc %1\n" + " la %0,0\n" + "1:\n" + EX_TABLE(0b,1b) + : "=d" (rc) : "Q" (*fpc), "0" (-EINVAL)); + return rc; +} + +static inline void save_fp_regs(freg_t *fprs) +{ + asm volatile("std 0,%0" : "=Q" (fprs[0])); + asm volatile("std 2,%0" : "=Q" (fprs[2])); + asm volatile("std 4,%0" : "=Q" (fprs[4])); + asm volatile("std 6,%0" : "=Q" (fprs[6])); if (!MACHINE_HAS_IEEE) return; - asm volatile( - " lfpc %0\n" - " ld 1,%O0+16(%R0)\n" - " ld 3,%O0+32(%R0)\n" - " ld 5,%O0+48(%R0)\n" - " ld 7,%O0+64(%R0)\n" - " ld 8,%O0+72(%R0)\n" - " ld 9,%O0+80(%R0)\n" - " ld 10,%O0+88(%R0)\n" - " ld 11,%O0+96(%R0)\n" - " ld 12,%O0+104(%R0)\n" - " ld 13,%O0+112(%R0)\n" - " ld 14,%O0+120(%R0)\n" - " ld 15,%O0+128(%R0)\n" - : : "Q" (*fpregs)); + asm volatile("std 1,%0" : "=Q" (fprs[1])); + asm volatile("std 3,%0" : "=Q" (fprs[3])); + asm volatile("std 5,%0" : "=Q" (fprs[5])); + asm volatile("std 7,%0" : "=Q" (fprs[7])); + asm volatile("std 8,%0" : "=Q" (fprs[8])); + asm volatile("std 9,%0" : "=Q" (fprs[9])); + asm volatile("std 10,%0" : "=Q" (fprs[10])); + asm volatile("std 11,%0" : "=Q" (fprs[11])); + asm volatile("std 12,%0" : "=Q" (fprs[12])); + asm volatile("std 13,%0" : "=Q" (fprs[13])); + asm volatile("std 14,%0" : "=Q" (fprs[14])); + asm volatile("std 15,%0" : "=Q" (fprs[15])); +} + +static inline void restore_fp_regs(freg_t *fprs) +{ + asm volatile("ld 0,%0" : : "Q" (fprs[0])); + asm volatile("ld 2,%0" : : "Q" (fprs[2])); + asm volatile("ld 4,%0" : : "Q" (fprs[4])); + asm volatile("ld 6,%0" : : "Q" (fprs[6])); + if (!MACHINE_HAS_IEEE) + return; + asm volatile("ld 1,%0" : : "Q" (fprs[1])); + asm volatile("ld 3,%0" : : "Q" (fprs[3])); + asm volatile("ld 5,%0" : : "Q" (fprs[5])); + asm volatile("ld 7,%0" : : "Q" (fprs[7])); + asm volatile("ld 8,%0" : : "Q" (fprs[8])); + asm volatile("ld 9,%0" : : "Q" (fprs[9])); + asm volatile("ld 10,%0" : : "Q" (fprs[10])); + asm volatile("ld 11,%0" : : "Q" (fprs[11])); + asm volatile("ld 12,%0" : : "Q" (fprs[12])); + asm volatile("ld 13,%0" : : "Q" (fprs[13])); + asm volatile("ld 14,%0" : : "Q" (fprs[14])); + asm volatile("ld 15,%0" : : "Q" (fprs[15])); } static inline void save_access_regs(unsigned int *acrs) @@ -83,12 +119,14 @@ static inline void restore_access_regs(unsigned int *acrs) #define switch_to(prev,next,last) do { \ if (prev->mm) { \ - save_fp_regs(&prev->thread.fp_regs); \ + save_fp_ctl(&prev->thread.fp_regs.fpc); \ + save_fp_regs(prev->thread.fp_regs.fprs); \ save_access_regs(&prev->thread.acrs[0]); \ save_ri_cb(prev->thread.ri_cb); \ } \ if (next->mm) { \ - restore_fp_regs(&next->thread.fp_regs); \ + restore_fp_ctl(&next->thread.fp_regs.fpc); \ + restore_fp_regs(next->thread.fp_regs.fprs); \ restore_access_regs(&next->thread.acrs[0]); \ restore_ri_cb(next->thread.ri_cb, prev->thread.ri_cb); \ update_cr_regs(next); \ diff --git a/arch/s390/include/asm/timex.h b/arch/s390/include/asm/timex.h index 8ad8af91503..8beee1cceba 100644 --- a/arch/s390/include/asm/timex.h +++ b/arch/s390/include/asm/timex.h @@ -71,30 +71,32 @@ static inline void local_tick_enable(unsigned long long comp) typedef unsigned long long cycles_t; -static inline unsigned long long get_tod_clock(void) +static inline void get_tod_clock_ext(char clk[16]) { - unsigned long long clk; - -#ifdef CONFIG_HAVE_MARCH_Z9_109_FEATURES - asm volatile(".insn s,0xb27c0000,%0" : "=Q" (clk) : : "cc"); -#else - asm volatile("stck %0" : "=Q" (clk) : : "cc"); -#endif - return clk; -} + typedef struct { char _[sizeof(clk)]; } addrtype; -static inline void get_tod_clock_ext(char *clk) -{ - asm volatile("stcke %0" : "=Q" (*clk) : : "cc"); + asm volatile("stcke %0" : "=Q" (*(addrtype *) clk) : : "cc"); } -static inline unsigned long long get_tod_clock_xt(void) +static inline unsigned long long get_tod_clock(void) { unsigned char clk[16]; get_tod_clock_ext(clk); return *((unsigned long long *)&clk[1]); } +static inline unsigned long long get_tod_clock_fast(void) +{ +#ifdef CONFIG_HAVE_MARCH_Z9_109_FEATURES + unsigned long long clk; + + asm volatile("stckf %0" : "=Q" (clk) : : "cc"); + return clk; +#else + return get_tod_clock(); +#endif +} + static inline cycles_t get_cycles(void) { return (cycles_t) get_tod_clock() >> 2; @@ -125,7 +127,7 @@ extern u64 sched_clock_base_cc; */ static inline unsigned long long get_tod_clock_monotonic(void) { - return get_tod_clock_xt() - sched_clock_base_cc; + return get_tod_clock() - sched_clock_base_cc; } /** diff --git a/arch/s390/include/asm/uaccess.h b/arch/s390/include/asm/uaccess.h index 9c33ed4e666..79330af9a5f 100644 --- a/arch/s390/include/asm/uaccess.h +++ b/arch/s390/include/asm/uaccess.h @@ -94,9 +94,7 @@ static inline unsigned long extable_fixup(const struct exception_table_entry *x) struct uaccess_ops { size_t (*copy_from_user)(size_t, const void __user *, void *); - size_t (*copy_from_user_small)(size_t, const void __user *, void *); size_t (*copy_to_user)(size_t, void __user *, const void *); - size_t (*copy_to_user_small)(size_t, void __user *, const void *); size_t (*copy_in_user)(size_t, void __user *, const void __user *); size_t (*clear_user)(size_t, void __user *); size_t (*strnlen_user)(size_t, const char __user *); @@ -106,22 +104,20 @@ struct uaccess_ops { }; extern struct uaccess_ops uaccess; -extern struct uaccess_ops uaccess_std; extern struct uaccess_ops uaccess_mvcos; -extern struct uaccess_ops uaccess_mvcos_switch; extern struct uaccess_ops uaccess_pt; extern int __handle_fault(unsigned long, unsigned long, int); static inline int __put_user_fn(size_t size, void __user *ptr, void *x) { - size = uaccess.copy_to_user_small(size, ptr, x); + size = uaccess.copy_to_user(size, ptr, x); return size ? -EFAULT : size; } static inline int __get_user_fn(size_t size, const void __user *ptr, void *x) { - size = uaccess.copy_from_user_small(size, ptr, x); + size = uaccess.copy_from_user(size, ptr, x); return size ? -EFAULT : size; } @@ -226,10 +222,7 @@ extern int __get_user_bad(void) __attribute__((noreturn)); static inline unsigned long __must_check __copy_to_user(void __user *to, const void *from, unsigned long n) { - if (__builtin_constant_p(n) && (n <= 256)) - return uaccess.copy_to_user_small(n, to, from); - else - return uaccess.copy_to_user(n, to, from); + return uaccess.copy_to_user(n, to, from); } #define __copy_to_user_inatomic __copy_to_user @@ -275,10 +268,7 @@ copy_to_user(void __user *to, const void *from, unsigned long n) static inline unsigned long __must_check __copy_from_user(void *to, const void __user *from, unsigned long n) { - if (__builtin_constant_p(n) && (n <= 256)) - return uaccess.copy_from_user_small(n, from, to); - else - return uaccess.copy_from_user(n, from, to); + return uaccess.copy_from_user(n, from, to); } extern void copy_from_user_overflow(void) diff --git a/arch/s390/include/uapi/asm/ptrace.h b/arch/s390/include/uapi/asm/ptrace.h index 7a84619e315..7e0b498a2c2 100644 --- a/arch/s390/include/uapi/asm/ptrace.h +++ b/arch/s390/include/uapi/asm/ptrace.h @@ -199,6 +199,7 @@ typedef union typedef struct { __u32 fpc; + __u32 pad; freg_t fprs[NUM_FPRS]; } s390_fp_regs; @@ -206,7 +207,6 @@ typedef struct #define FPC_FLAGS_MASK 0x00F80000 #define FPC_DXC_MASK 0x0000FF00 #define FPC_RM_MASK 0x00000003 -#define FPC_VALID_MASK 0xF8F8FF03 /* this typedef defines how a Program Status Word looks like */ typedef struct @@ -263,7 +263,7 @@ typedef struct #define PSW_MASK_EA 0x0000000100000000UL #define PSW_MASK_BA 0x0000000080000000UL -#define PSW_MASK_USER 0x0000FF8180000000UL +#define PSW_MASK_USER 0x0000FF0180000000UL #define PSW_ADDR_AMODE 0x0000000000000000UL #define PSW_ADDR_INSN 0xFFFFFFFFFFFFFFFFUL diff --git a/arch/s390/include/uapi/asm/sigcontext.h b/arch/s390/include/uapi/asm/sigcontext.h index 584787f6ce4..b30de9c01bb 100644 --- a/arch/s390/include/uapi/asm/sigcontext.h +++ b/arch/s390/include/uapi/asm/sigcontext.h @@ -49,6 +49,7 @@ typedef struct typedef struct { unsigned int fpc; + unsigned int pad; double fprs[__NUM_FPRS]; } _s390_fp_regs; diff --git a/arch/s390/kernel/Makefile b/arch/s390/kernel/Makefile index 4bb2a465616..2403303cfed 100644 --- a/arch/s390/kernel/Makefile +++ b/arch/s390/kernel/Makefile @@ -28,7 +28,7 @@ CFLAGS_ptrace.o += -DUTS_MACHINE='"$(UTS_MACHINE)"' CFLAGS_sysinfo.o += -Iinclude/math-emu -Iarch/s390/math-emu -w -obj-y := bitmap.o traps.o time.o process.o base.o early.o setup.o vtime.o +obj-y := traps.o time.o process.o base.o early.o setup.o vtime.o obj-y += processor.o sys_s390.o ptrace.o signal.o cpcmd.o ebcdic.o nmi.o obj-y += debug.o irq.o ipl.o dis.o diag.o sclp.o vdso.o obj-y += sysinfo.o jump_label.o lgr.o os_info.o machine_kexec.o pgm_check.o diff --git a/arch/s390/kernel/bitmap.c b/arch/s390/kernel/bitmap.c deleted file mode 100644 index 102da5e2303..00000000000 --- a/arch/s390/kernel/bitmap.c +++ /dev/null @@ -1,54 +0,0 @@ -/* - * Bitmaps for set_bit, clear_bit, test_and_set_bit, ... - * See include/asm/{bitops.h|posix_types.h} for details - * - * Copyright IBM Corp. 1999, 2009 - * Author(s): Martin Schwidefsky <schwidefsky@de.ibm.com>, - */ - -#include <linux/bitops.h> -#include <linux/module.h> - -const char _oi_bitmap[] = { 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80 }; -EXPORT_SYMBOL(_oi_bitmap); - -const char _ni_bitmap[] = { 0xfe, 0xfd, 0xfb, 0xf7, 0xef, 0xdf, 0xbf, 0x7f }; -EXPORT_SYMBOL(_ni_bitmap); - -const char _zb_findmap[] = { - 0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,4, - 0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,5, - 0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,4, - 0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,6, - 0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,4, - 0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,5, - 0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,4, - 0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,7, - 0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,4, - 0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,5, - 0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,4, - 0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,6, - 0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,4, - 0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,5, - 0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,4, - 0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,8 }; -EXPORT_SYMBOL(_zb_findmap); - -const char _sb_findmap[] = { - 8,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0, - 4,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0, - 5,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0, - 4,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0, - 6,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0, - 4,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0, - 5,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0, - 4,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0, - 7,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0, - 4,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0, - 5,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0, - 4,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0, - 6,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0, - 4,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0, - 5,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0, - 4,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0 }; -EXPORT_SYMBOL(_sb_findmap); diff --git a/arch/s390/kernel/cache.c b/arch/s390/kernel/cache.c index dd62071624b..3a414c0f93e 100644 --- a/arch/s390/kernel/cache.c +++ b/arch/s390/kernel/cache.c @@ -146,15 +146,14 @@ static void __init cache_build_info(void) ct.raw = ecag(EXTRACT_TOPOLOGY, 0, 0); for (level = 0; level < CACHE_MAX_LEVEL; level++) { switch (ct.ci[level].scope) { - case CACHE_SCOPE_NOTEXISTS: - case CACHE_SCOPE_RESERVED: - return; case CACHE_SCOPE_SHARED: private = 0; break; case CACHE_SCOPE_PRIVATE: private = 1; break; + default: + return; } if (ct.ci[level].type == CACHE_TYPE_SEPARATE) { rc = cache_add(level, private, CACHE_TYPE_DATA); diff --git a/arch/s390/kernel/compat_linux.c b/arch/s390/kernel/compat_linux.c index 1f1b8c70ab9..e030d2bdec1 100644 --- a/arch/s390/kernel/compat_linux.c +++ b/arch/s390/kernel/compat_linux.c @@ -58,10 +58,6 @@ #include "compat_linux.h" -u32 psw32_user_bits = PSW32_MASK_DAT | PSW32_MASK_IO | PSW32_MASK_EXT | - PSW32_DEFAULT_KEY | PSW32_MASK_BASE | PSW32_MASK_MCHECK | - PSW32_MASK_PSTATE | PSW32_ASC_HOME; - /* For this source file, we want overflow handling. */ #undef high2lowuid diff --git a/arch/s390/kernel/compat_linux.h b/arch/s390/kernel/compat_linux.h index 976518c0592..1bfda3eca37 100644 --- a/arch/s390/kernel/compat_linux.h +++ b/arch/s390/kernel/compat_linux.h @@ -27,6 +27,7 @@ typedef union typedef struct { unsigned int fpc; + unsigned int pad; freg_t32 fprs[__NUM_FPRS]; } _s390_fp_regs32; diff --git a/arch/s390/kernel/compat_signal.c b/arch/s390/kernel/compat_signal.c index 1389b637dae..5a3ab5c191f 100644 --- a/arch/s390/kernel/compat_signal.c +++ b/arch/s390/kernel/compat_signal.c @@ -99,7 +99,7 @@ int copy_siginfo_to_user32(compat_siginfo_t __user *to, siginfo_t *from) break; } } - return err; + return err ? -EFAULT : 0; } int copy_siginfo_from_user32(siginfo_t *to, compat_siginfo_t __user *from) @@ -148,62 +148,71 @@ int copy_siginfo_from_user32(siginfo_t *to, compat_siginfo_t __user *from) break; } } - return err; + return err ? -EFAULT : 0; } static int save_sigregs32(struct pt_regs *regs, _sigregs32 __user *sregs) { - _s390_regs_common32 regs32; - int err, i; + _sigregs32 user_sregs; + int i; - regs32.psw.mask = psw32_user_bits | - ((__u32)(regs->psw.mask >> 32) & PSW32_MASK_USER); - regs32.psw.addr = (__u32) regs->psw.addr | + user_sregs.regs.psw.mask = (__u32)(regs->psw.mask >> 32); + user_sregs.regs.psw.mask &= PSW32_MASK_USER | PSW32_MASK_RI; + user_sregs.regs.psw.mask |= PSW32_USER_BITS; + user_sregs.regs.psw.addr = (__u32) regs->psw.addr | (__u32)(regs->psw.mask & PSW_MASK_BA); for (i = 0; i < NUM_GPRS; i++) - regs32.gprs[i] = (__u32) regs->gprs[i]; + user_sregs.regs.gprs[i] = (__u32) regs->gprs[i]; save_access_regs(current->thread.acrs); - memcpy(regs32.acrs, current->thread.acrs, sizeof(regs32.acrs)); - err = __copy_to_user(&sregs->regs, ®s32, sizeof(regs32)); - if (err) - return err; - save_fp_regs(¤t->thread.fp_regs); - /* s390_fp_regs and _s390_fp_regs32 are the same ! */ - return __copy_to_user(&sregs->fpregs, ¤t->thread.fp_regs, - sizeof(_s390_fp_regs32)); + memcpy(&user_sregs.regs.acrs, current->thread.acrs, + sizeof(user_sregs.regs.acrs)); + save_fp_ctl(¤t->thread.fp_regs.fpc); + save_fp_regs(current->thread.fp_regs.fprs); + memcpy(&user_sregs.fpregs, ¤t->thread.fp_regs, + sizeof(user_sregs.fpregs)); + if (__copy_to_user(sregs, &user_sregs, sizeof(_sigregs32))) + return -EFAULT; + return 0; } static int restore_sigregs32(struct pt_regs *regs,_sigregs32 __user *sregs) { - _s390_regs_common32 regs32; - int err, i; + _sigregs32 user_sregs; + int i; /* Alwys make any pending restarted system call return -EINTR */ current_thread_info()->restart_block.fn = do_no_restart_syscall; - err = __copy_from_user(®s32, &sregs->regs, sizeof(regs32)); - if (err) - return err; + if (__copy_from_user(&user_sregs, &sregs->regs, sizeof(user_sregs))) + return -EFAULT; + + if (!is_ri_task(current) && (user_sregs.regs.psw.mask & PSW32_MASK_RI)) + return -EINVAL; + + /* Loading the floating-point-control word can fail. Do that first. */ + if (restore_fp_ctl(&user_sregs.fpregs.fpc)) + return -EINVAL; + + /* Use regs->psw.mask instead of PSW_USER_BITS to preserve PER bit. */ regs->psw.mask = (regs->psw.mask & ~PSW_MASK_USER) | - (__u64)(regs32.psw.mask & PSW32_MASK_USER) << 32 | - (__u64)(regs32.psw.addr & PSW32_ADDR_AMODE); + (__u64)(user_sregs.regs.psw.mask & PSW32_MASK_USER) << 32 | + (__u64)(user_sregs.regs.psw.mask & PSW32_MASK_RI) << 32 | + (__u64)(user_sregs.regs.psw.addr & PSW32_ADDR_AMODE); /* Check for invalid user address space control. */ - if ((regs->psw.mask & PSW_MASK_ASC) >= (psw_kernel_bits & PSW_MASK_ASC)) - regs->psw.mask = (psw_user_bits & PSW_MASK_ASC) | + if ((regs->psw.mask & PSW_MASK_ASC) == PSW_ASC_HOME) + regs->psw.mask = PSW_ASC_PRIMARY | (regs->psw.mask & ~PSW_MASK_ASC); - regs->psw.addr = (__u64)(regs32.psw.addr & PSW32_ADDR_INSN); + regs->psw.addr = (__u64)(user_sregs.regs.psw.addr & PSW32_ADDR_INSN); for (i = 0; i < NUM_GPRS; i++) - regs->gprs[i] = (__u64) regs32.gprs[i]; - memcpy(current->thread.acrs, regs32.acrs, sizeof(current->thread.acrs)); + regs->gprs[i] = (__u64) user_sregs.regs.gprs[i]; + memcpy(¤t->thread.acrs, &user_sregs.regs.acrs, + sizeof(current->thread.acrs)); restore_access_regs(current->thread.acrs); - err = __copy_from_user(¤t->thread.fp_regs, &sregs->fpregs, - sizeof(_s390_fp_regs32)); - current->thread.fp_regs.fpc &= FPC_VALID_MASK; - if (err) - return err; + memcpy(¤t->thread.fp_regs, &user_sregs.fpregs, + sizeof(current->thread.fp_regs)); - restore_fp_regs(¤t->thread.fp_regs); + restore_fp_regs(current->thread.fp_regs.fprs); clear_thread_flag(TIF_SYSCALL); /* No longer in a system call */ return 0; } @@ -215,18 +224,18 @@ static int save_sigregs_gprs_high(struct pt_regs *regs, __u32 __user *uregs) for (i = 0; i < NUM_GPRS; i++) gprs_high[i] = regs->gprs[i] >> 32; - - return __copy_to_user(uregs, &gprs_high, sizeof(gprs_high)); + if (__copy_to_user(uregs, &gprs_high, sizeof(gprs_high))) + return -EFAULT; + return 0; } static int restore_sigregs_gprs_high(struct pt_regs *regs, __u32 __user *uregs) { __u32 gprs_high[NUM_GPRS]; - int err, i; + int i; - err = __copy_from_user(&gprs_high, uregs, sizeof(gprs_high)); - if (err) - return err; + if (__copy_from_user(&gprs_high, uregs, sizeof(gprs_high))) + return -EFAULT; for (i = 0; i < NUM_GPRS; i++) *(__u32 *)®s->gprs[i] = gprs_high[i]; return 0; @@ -348,7 +357,7 @@ static int setup_frame32(int sig, struct k_sigaction *ka, regs->gprs[15] = (__force __u64) frame; /* Force 31 bit amode and default user address space control. */ regs->psw.mask = PSW_MASK_BA | - (psw_user_bits & PSW_MASK_ASC) | + (PSW_USER_BITS & PSW_MASK_ASC) | (regs->psw.mask & ~PSW_MASK_ASC); regs->psw.addr = (__force __u64) ka->sa.sa_handler; @@ -415,7 +424,7 @@ static int setup_rt_frame32(int sig, struct k_sigaction *ka, siginfo_t *info, regs->gprs[15] = (__force __u64) frame; /* Force 31 bit amode and default user address space control. */ regs->psw.mask = PSW_MASK_BA | - (psw_user_bits & PSW_MASK_ASC) | + (PSW_USER_BITS & PSW_MASK_ASC) | (regs->psw.mask & ~PSW_MASK_ASC); regs->psw.addr = (__u64 __force) ka->sa.sa_handler; diff --git a/arch/s390/kernel/crash_dump.c b/arch/s390/kernel/crash_dump.c index 7dd21720e5b..f45b2ab0cb8 100644 --- a/arch/s390/kernel/crash_dump.c +++ b/arch/s390/kernel/crash_dump.c @@ -22,6 +22,32 @@ #define PTR_SUB(x, y) (((char *) (x)) - ((unsigned long) (y))) #define PTR_DIFF(x, y) ((unsigned long)(((char *) (x)) - ((unsigned long) (y)))) +struct dump_save_areas dump_save_areas; + +/* + * Allocate and add a save area for a CPU + */ +struct save_area *dump_save_area_create(int cpu) +{ + struct save_area **save_areas, *save_area; + + save_area = kmalloc(sizeof(*save_area), GFP_KERNEL); + if (!save_area) + return NULL; + if (cpu + 1 > dump_save_areas.count) { + dump_save_areas.count = cpu + 1; + save_areas = krealloc(dump_save_areas.areas, + dump_save_areas.count * sizeof(void *), + GFP_KERNEL | __GFP_ZERO); + if (!save_areas) { + kfree(save_area); + return NULL; + } + dump_save_areas.areas = save_areas; + } + dump_save_areas.areas[cpu] = save_area; + return save_area; +} /* * Return physical address for virtual address @@ -45,7 +71,6 @@ static inline void *load_real_addr(void *addr) static int copy_from_realmem(void *dest, void *src, size_t count) { unsigned long size; - int rc; if (!count) return 0; @@ -451,8 +476,8 @@ static int get_cpu_cnt(void) { int i, cpus = 0; - for (i = 0; zfcpdump_save_areas[i]; i++) { - if (zfcpdump_save_areas[i]->pref_reg == 0) + for (i = 0; i < dump_save_areas.count; i++) { + if (dump_save_areas.areas[i]->pref_reg == 0) continue; cpus++; } @@ -523,8 +548,8 @@ static void *notes_init(Elf64_Phdr *phdr, void *ptr, u64 notes_offset) ptr = nt_prpsinfo(ptr); - for (i = 0; zfcpdump_save_areas[i]; i++) { - sa = zfcpdump_save_areas[i]; + for (i = 0; i < dump_save_areas.count; i++) { + sa = dump_save_areas.areas[i]; if (sa->pref_reg == 0) continue; ptr = fill_cpu_elf_notes(ptr, sa); diff --git a/arch/s390/kernel/debug.c b/arch/s390/kernel/debug.c index f1279dc2e1b..ee8390da6ea 100644 --- a/arch/s390/kernel/debug.c +++ b/arch/s390/kernel/debug.c @@ -867,7 +867,7 @@ static inline void debug_finish_entry(debug_info_t * id, debug_entry_t* active, int level, int exception) { - active->id.stck = get_tod_clock(); + active->id.stck = get_tod_clock_fast(); active->id.fields.cpuid = smp_processor_id(); active->caller = __builtin_return_address(0); active->id.fields.exception = exception; @@ -889,7 +889,7 @@ static int debug_active=1; * if debug_active is already off */ static int -s390dbf_procactive(ctl_table *table, int write, +s390dbf_procactive(struct ctl_table *table, int write, void __user *buffer, size_t *lenp, loff_t *ppos) { if (!write || debug_stoppable || !debug_active) diff --git a/arch/s390/kernel/dis.c b/arch/s390/kernel/dis.c index be87d3e05a5..993efe6a887 100644 --- a/arch/s390/kernel/dis.c +++ b/arch/s390/kernel/dis.c @@ -23,6 +23,7 @@ #include <linux/kdebug.h> #include <asm/uaccess.h> +#include <asm/dis.h> #include <asm/io.h> #include <linux/atomic.h> #include <asm/mathemu.h> @@ -37,17 +38,6 @@ #define ONELONG "%016lx: " #endif /* CONFIG_64BIT */ -#define OPERAND_GPR 0x1 /* Operand printed as %rx */ -#define OPERAND_FPR 0x2 /* Operand printed as %fx */ -#define OPERAND_AR 0x4 /* Operand printed as %ax */ -#define OPERAND_CR 0x8 /* Operand printed as %cx */ -#define OPERAND_DISP 0x10 /* Operand printed as displacement */ -#define OPERAND_BASE 0x20 /* Operand printed as base register */ -#define OPERAND_INDEX 0x40 /* Operand printed as index register */ -#define OPERAND_PCREL 0x80 /* Operand printed as pc-relative symbol */ -#define OPERAND_SIGNED 0x100 /* Operand printed as signed value */ -#define OPERAND_LENGTH 0x200 /* Operand printed as length (+1) */ - enum { UNUSED, /* Indicates the end of the operand list */ R_8, /* GPR starting at position 8 */ @@ -155,19 +145,7 @@ enum { INSTR_S_00, INSTR_S_RD, }; -struct operand { - int bits; /* The number of bits in the operand. */ - int shift; /* The number of bits to shift. */ - int flags; /* One bit syntax flags. */ -}; - -struct insn { - const char name[5]; - unsigned char opfrag; - unsigned char format; -}; - -static const struct operand operands[] = +static const struct s390_operand operands[] = { [UNUSED] = { 0, 0, 0 }, [R_8] = { 4, 8, OPERAND_GPR }, @@ -479,7 +457,7 @@ static char *long_insn_name[] = { [LONG_INSN_PCISTB] = "pcistb", }; -static struct insn opcode[] = { +static struct s390_insn opcode[] = { #ifdef CONFIG_64BIT { "bprp", 0xc5, INSTR_MII_UPI }, { "bpp", 0xc7, INSTR_SMI_U0RDP }, @@ -668,7 +646,7 @@ static struct insn opcode[] = { { "", 0, INSTR_INVALID } }; -static struct insn opcode_01[] = { +static struct s390_insn opcode_01[] = { #ifdef CONFIG_64BIT { "ptff", 0x04, INSTR_E }, { "pfpo", 0x0a, INSTR_E }, @@ -684,7 +662,7 @@ static struct insn opcode_01[] = { { "", 0, INSTR_INVALID } }; -static struct insn opcode_a5[] = { +static struct s390_insn opcode_a5[] = { #ifdef CONFIG_64BIT { "iihh", 0x00, INSTR_RI_RU }, { "iihl", 0x01, INSTR_RI_RU }, @@ -706,7 +684,7 @@ static struct insn opcode_a5[] = { { "", 0, INSTR_INVALID } }; -static struct insn opcode_a7[] = { +static struct s390_insn opcode_a7[] = { #ifdef CONFIG_64BIT { "tmhh", 0x02, INSTR_RI_RU }, { "tmhl", 0x03, INSTR_RI_RU }, @@ -728,7 +706,7 @@ static struct insn opcode_a7[] = { { "", 0, INSTR_INVALID } }; -static struct insn opcode_aa[] = { +static struct s390_insn opcode_aa[] = { #ifdef CONFIG_64BIT { { 0, LONG_INSN_RINEXT }, 0x00, INSTR_RI_RI }, { "rion", 0x01, INSTR_RI_RI }, @@ -739,7 +717,7 @@ static struct insn opcode_aa[] = { { "", 0, INSTR_INVALID } }; -static struct insn opcode_b2[] = { +static struct s390_insn opcode_b2[] = { #ifdef CONFIG_64BIT { "stckf", 0x7c, INSTR_S_RD }, { "lpp", 0x80, INSTR_S_RD }, @@ -851,7 +829,7 @@ static struct insn opcode_b2[] = { { "", 0, INSTR_INVALID } }; -static struct insn opcode_b3[] = { +static struct s390_insn opcode_b3[] = { #ifdef CONFIG_64BIT { "maylr", 0x38, INSTR_RRF_F0FF }, { "mylr", 0x39, INSTR_RRF_F0FF }, @@ -1034,7 +1012,7 @@ static struct insn opcode_b3[] = { { "", 0, INSTR_INVALID } }; -static struct insn opcode_b9[] = { +static struct s390_insn opcode_b9[] = { #ifdef CONFIG_64BIT { "lpgr", 0x00, INSTR_RRE_RR }, { "lngr", 0x01, INSTR_RRE_RR }, @@ -1167,7 +1145,7 @@ static struct insn opcode_b9[] = { { "", 0, INSTR_INVALID } }; -static struct insn opcode_c0[] = { +static struct s390_insn opcode_c0[] = { #ifdef CONFIG_64BIT { "lgfi", 0x01, INSTR_RIL_RI }, { "xihf", 0x06, INSTR_RIL_RU }, @@ -1187,7 +1165,7 @@ static struct insn opcode_c0[] = { { "", 0, INSTR_INVALID } }; -static struct insn opcode_c2[] = { +static struct s390_insn opcode_c2[] = { #ifdef CONFIG_64BIT { "msgfi", 0x00, INSTR_RIL_RI }, { "msfi", 0x01, INSTR_RIL_RI }, @@ -1205,7 +1183,7 @@ static struct insn opcode_c2[] = { { "", 0, INSTR_INVALID } }; -static struct insn opcode_c4[] = { +static struct s390_insn opcode_c4[] = { #ifdef CONFIG_64BIT { "llhrl", 0x02, INSTR_RIL_RP }, { "lghrl", 0x04, INSTR_RIL_RP }, @@ -1222,7 +1200,7 @@ static struct insn opcode_c4[] = { { "", 0, INSTR_INVALID } }; -static struct insn opcode_c6[] = { +static struct s390_insn opcode_c6[] = { #ifdef CONFIG_64BIT { "exrl", 0x00, INSTR_RIL_RP }, { "pfdrl", 0x02, INSTR_RIL_UP }, @@ -1240,7 +1218,7 @@ static struct insn opcode_c6[] = { { "", 0, INSTR_INVALID } }; -static struct insn opcode_c8[] = { +static struct s390_insn opcode_c8[] = { #ifdef CONFIG_64BIT { "mvcos", 0x00, INSTR_SSF_RRDRD }, { "ectg", 0x01, INSTR_SSF_RRDRD }, @@ -1251,7 +1229,7 @@ static struct insn opcode_c8[] = { { "", 0, INSTR_INVALID } }; -static struct insn opcode_cc[] = { +static struct s390_insn opcode_cc[] = { #ifdef CONFIG_64BIT { "brcth", 0x06, INSTR_RIL_RP }, { "aih", 0x08, INSTR_RIL_RI }, @@ -1263,7 +1241,7 @@ static struct insn opcode_cc[] = { { "", 0, INSTR_INVALID } }; -static struct insn opcode_e3[] = { +static struct s390_insn opcode_e3[] = { #ifdef CONFIG_64BIT { "ltg", 0x02, INSTR_RXY_RRRD }, { "lrag", 0x03, INSTR_RXY_RRRD }, @@ -1369,7 +1347,7 @@ static struct insn opcode_e3[] = { { "", 0, INSTR_INVALID } }; -static struct insn opcode_e5[] = { +static struct s390_insn opcode_e5[] = { #ifdef CONFIG_64BIT { "strag", 0x02, INSTR_SSE_RDRD }, { "mvhhi", 0x44, INSTR_SIL_RDI }, @@ -1391,7 +1369,7 @@ static struct insn opcode_e5[] = { { "", 0, INSTR_INVALID } }; -static struct insn opcode_eb[] = { +static struct s390_insn opcode_eb[] = { #ifdef CONFIG_64BIT { "lmg", 0x04, INSTR_RSY_RRRD }, { "srag", 0x0a, INSTR_RSY_RRRD }, @@ -1465,7 +1443,7 @@ static struct insn opcode_eb[] = { { "", 0, INSTR_INVALID } }; -static struct insn opcode_ec[] = { +static struct s390_insn opcode_ec[] = { #ifdef CONFIG_64BIT { "brxhg", 0x44, INSTR_RIE_RRP }, { "brxlg", 0x45, INSTR_RIE_RRP }, @@ -1504,7 +1482,7 @@ static struct insn opcode_ec[] = { { "", 0, INSTR_INVALID } }; -static struct insn opcode_ed[] = { +static struct s390_insn opcode_ed[] = { #ifdef CONFIG_64BIT { "mayl", 0x38, INSTR_RXF_FRRDF }, { "myl", 0x39, INSTR_RXF_FRRDF }, @@ -1572,7 +1550,7 @@ static struct insn opcode_ed[] = { /* Extracts an operand value from an instruction. */ static unsigned int extract_operand(unsigned char *code, - const struct operand *operand) + const struct s390_operand *operand) { unsigned int val; int bits; @@ -1608,16 +1586,11 @@ static unsigned int extract_operand(unsigned char *code, return val; } -static inline int insn_length(unsigned char code) -{ - return ((((int) code + 64) >> 7) + 1) << 1; -} - -static struct insn *find_insn(unsigned char *code) +struct s390_insn *find_insn(unsigned char *code) { unsigned char opfrag = code[1]; unsigned char opmask; - struct insn *table; + struct s390_insn *table; switch (code[0]) { case 0x01: @@ -1706,7 +1679,7 @@ static struct insn *find_insn(unsigned char *code) */ int insn_to_mnemonic(unsigned char *instruction, char *buf, unsigned int len) { - struct insn *insn; + struct s390_insn *insn; insn = find_insn(instruction); if (!insn) @@ -1722,9 +1695,9 @@ EXPORT_SYMBOL_GPL(insn_to_mnemonic); static int print_insn(char *buffer, unsigned char *code, unsigned long addr) { - struct insn *insn; + struct s390_insn *insn; const unsigned char *ops; - const struct operand *operand; + const struct s390_operand *operand; unsigned int value; char separator; char *ptr; diff --git a/arch/s390/kernel/dumpstack.c b/arch/s390/kernel/dumpstack.c index 99e7f603589..e6af9406987 100644 --- a/arch/s390/kernel/dumpstack.c +++ b/arch/s390/kernel/dumpstack.c @@ -15,6 +15,7 @@ #include <linux/sched.h> #include <asm/processor.h> #include <asm/debug.h> +#include <asm/dis.h> #include <asm/ipl.h> #ifndef CONFIG_64BIT diff --git a/arch/s390/kernel/early.c b/arch/s390/kernel/early.c index dc8770d7173..96543ac400a 100644 --- a/arch/s390/kernel/early.c +++ b/arch/s390/kernel/early.c @@ -206,6 +206,7 @@ static noinline __init void clear_bss_section(void) */ static noinline __init void init_kernel_storage_key(void) { +#if PAGE_DEFAULT_KEY unsigned long end_pfn, init_pfn; end_pfn = PFN_UP(__pa(&_end)); @@ -213,6 +214,7 @@ static noinline __init void init_kernel_storage_key(void) for (init_pfn = 0 ; init_pfn < end_pfn; init_pfn++) page_set_storage_key(init_pfn << PAGE_SHIFT, PAGE_DEFAULT_KEY, 0); +#endif } static __initdata char sysinfo_page[PAGE_SIZE] __aligned(PAGE_SIZE); diff --git a/arch/s390/kernel/entry.h b/arch/s390/kernel/entry.h index e9b04c33d38..cb533f78c09 100644 --- a/arch/s390/kernel/entry.h +++ b/arch/s390/kernel/entry.h @@ -23,7 +23,6 @@ asmlinkage void do_syscall_trace_exit(struct pt_regs *regs); void do_protection_exception(struct pt_regs *regs); void do_dat_exception(struct pt_regs *regs); -void do_asce_exception(struct pt_regs *regs); void addressing_exception(struct pt_regs *regs); void data_exception(struct pt_regs *regs); diff --git a/arch/s390/kernel/ftrace.c b/arch/s390/kernel/ftrace.c index 1014ad5f769..224db03e951 100644 --- a/arch/s390/kernel/ftrace.c +++ b/arch/s390/kernel/ftrace.c @@ -151,14 +151,13 @@ unsigned long __kprobes prepare_ftrace_return(unsigned long parent, if (unlikely(atomic_read(¤t->tracing_graph_pause))) goto out; ip = (ip & PSW_ADDR_INSN) - MCOUNT_INSN_SIZE; - if (ftrace_push_return_trace(parent, ip, &trace.depth, 0) == -EBUSY) - goto out; trace.func = ip; + trace.depth = current->curr_ret_stack + 1; /* Only trace if the calling function expects to. */ - if (!ftrace_graph_entry(&trace)) { - current->curr_ret_stack--; + if (!ftrace_graph_entry(&trace)) + goto out; + if (ftrace_push_return_trace(parent, ip, &trace.depth, 0) == -EBUSY) goto out; - } parent = (unsigned long) return_to_handler; out: return parent; diff --git a/arch/s390/kernel/head.S b/arch/s390/kernel/head.S index fd8db63dfc9..429afcc480c 100644 --- a/arch/s390/kernel/head.S +++ b/arch/s390/kernel/head.S @@ -437,7 +437,7 @@ ENTRY(startup_kdump) #if defined(CONFIG_64BIT) #if defined(CONFIG_MARCH_ZEC12) - .long 3, 0xc100efe3, 0xf46ce000, 0x00400000 + .long 3, 0xc100efe3, 0xf46ce800, 0x00400000 #elif defined(CONFIG_MARCH_Z196) .long 2, 0xc100efe3, 0xf46c0000 #elif defined(CONFIG_MARCH_Z10) diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c index feb719d3c85..633ca750453 100644 --- a/arch/s390/kernel/ipl.c +++ b/arch/s390/kernel/ipl.c @@ -2051,12 +2051,12 @@ void s390_reset_system(void (*func)(void *), void *data) __ctl_clear_bit(0,28); /* Set new machine check handler */ - S390_lowcore.mcck_new_psw.mask = psw_kernel_bits | PSW_MASK_DAT; + S390_lowcore.mcck_new_psw.mask = PSW_KERNEL_BITS | PSW_MASK_DAT; S390_lowcore.mcck_new_psw.addr = PSW_ADDR_AMODE | (unsigned long) s390_base_mcck_handler; /* Set new program check handler */ - S390_lowcore.program_new_psw.mask = psw_kernel_bits | PSW_MASK_DAT; + S390_lowcore.program_new_psw.mask = PSW_KERNEL_BITS | PSW_MASK_DAT; S390_lowcore.program_new_psw.addr = PSW_ADDR_AMODE | (unsigned long) s390_base_pgm_handler; diff --git a/arch/s390/kernel/kprobes.c b/arch/s390/kernel/kprobes.c index d86e64eddb4..59a9c35c459 100644 --- a/arch/s390/kernel/kprobes.c +++ b/arch/s390/kernel/kprobes.c @@ -26,11 +26,12 @@ #include <linux/stop_machine.h> #include <linux/kdebug.h> #include <linux/uaccess.h> -#include <asm/cacheflush.h> -#include <asm/sections.h> #include <linux/module.h> #include <linux/slab.h> #include <linux/hardirq.h> +#include <asm/cacheflush.h> +#include <asm/sections.h> +#include <asm/dis.h> DEFINE_PER_CPU(struct kprobe *, current_kprobe); DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk); @@ -59,6 +60,8 @@ struct kprobe_insn_cache kprobe_dmainsn_slots = { static int __kprobes is_prohibited_opcode(kprobe_opcode_t *insn) { + if (!is_known_insn((unsigned char *)insn)) + return -EINVAL; switch (insn[0] >> 8) { case 0x0c: /* bassm */ case 0x0b: /* bsm */ @@ -208,7 +211,7 @@ static void __kprobes copy_instruction(struct kprobe *p) s64 disp, new_disp; u64 addr, new_addr; - memcpy(p->ainsn.insn, p->addr, ((p->opcode >> 14) + 3) & -2); + memcpy(p->ainsn.insn, p->addr, insn_length(p->opcode >> 8)); if (!is_insn_relative_long(p->ainsn.insn)) return; /* @@ -252,7 +255,7 @@ static int __kprobes s390_get_insn_slot(struct kprobe *p) p->ainsn.insn = NULL; if (is_kernel_addr(p->addr)) p->ainsn.insn = get_dmainsn_slot(); - if (is_module_addr(p->addr)) + else if (is_module_addr(p->addr)) p->ainsn.insn = get_insn_slot(); return p->ainsn.insn ? 0 : -ENOMEM; } @@ -608,7 +611,7 @@ static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs) ip += (unsigned long) p->addr - (unsigned long) p->ainsn.insn; if (fixup & FIXUP_BRANCH_NOT_TAKEN) { - int ilen = ((p->ainsn.insn[0] >> 14) + 3) & -2; + int ilen = insn_length(p->ainsn.insn[0] >> 8); if (ip - (unsigned long) p->ainsn.insn == ilen) ip = (unsigned long) p->addr + ilen; } diff --git a/arch/s390/kernel/pgm_check.S b/arch/s390/kernel/pgm_check.S index 14bdecb6192..4a460c44e17 100644 --- a/arch/s390/kernel/pgm_check.S +++ b/arch/s390/kernel/pgm_check.S @@ -78,7 +78,7 @@ PGM_CHECK_DEFAULT /* 34 */ PGM_CHECK_DEFAULT /* 35 */ PGM_CHECK_DEFAULT /* 36 */ PGM_CHECK_DEFAULT /* 37 */ -PGM_CHECK_64BIT(do_asce_exception) /* 38 */ +PGM_CHECK_DEFAULT /* 38 */ PGM_CHECK_64BIT(do_dat_exception) /* 39 */ PGM_CHECK_64BIT(do_dat_exception) /* 3a */ PGM_CHECK_64BIT(do_dat_exception) /* 3b */ diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c index c5dbb335716..7ed0d4e2a43 100644 --- a/arch/s390/kernel/process.c +++ b/arch/s390/kernel/process.c @@ -139,7 +139,7 @@ int copy_thread(unsigned long clone_flags, unsigned long new_stackp, if (unlikely(p->flags & PF_KTHREAD)) { /* kernel thread */ memset(&frame->childregs, 0, sizeof(struct pt_regs)); - frame->childregs.psw.mask = psw_kernel_bits | PSW_MASK_DAT | + frame->childregs.psw.mask = PSW_KERNEL_BITS | PSW_MASK_DAT | PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK; frame->childregs.psw.addr = PSW_ADDR_AMODE | (unsigned long) kernel_thread_starter; @@ -165,7 +165,8 @@ int copy_thread(unsigned long clone_flags, unsigned long new_stackp, * save fprs to current->thread.fp_regs to merge them with * the emulated registers and then copy the result to the child. */ - save_fp_regs(¤t->thread.fp_regs); + save_fp_ctl(¤t->thread.fp_regs.fpc); + save_fp_regs(current->thread.fp_regs.fprs); memcpy(&p->thread.fp_regs, ¤t->thread.fp_regs, sizeof(s390_fp_regs)); /* Set a new TLS ? */ @@ -173,7 +174,9 @@ int copy_thread(unsigned long clone_flags, unsigned long new_stackp, p->thread.acrs[0] = frame->childregs.gprs[6]; #else /* CONFIG_64BIT */ /* Save the fpu registers to new thread structure. */ - save_fp_regs(&p->thread.fp_regs); + save_fp_ctl(&p->thread.fp_regs.fpc); + save_fp_regs(p->thread.fp_regs.fprs); + p->thread.fp_regs.pad = 0; /* Set a new TLS ? */ if (clone_flags & CLONE_SETTLS) { unsigned long tls = frame->childregs.gprs[6]; @@ -205,10 +208,12 @@ int dump_fpu (struct pt_regs * regs, s390_fp_regs *fpregs) * save fprs to current->thread.fp_regs to merge them with * the emulated registers and then copy the result to the dump. */ - save_fp_regs(¤t->thread.fp_regs); + save_fp_ctl(¤t->thread.fp_regs.fpc); + save_fp_regs(current->thread.fp_regs.fprs); memcpy(fpregs, ¤t->thread.fp_regs, sizeof(s390_fp_regs)); #else /* CONFIG_64BIT */ - save_fp_regs(fpregs); + save_fp_ctl(&fpregs->fpc); + save_fp_regs(fpregs->fprs); #endif /* CONFIG_64BIT */ return 1; } diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c index 9556905bd3c..e65c91c591e 100644 --- a/arch/s390/kernel/ptrace.c +++ b/arch/s390/kernel/ptrace.c @@ -198,9 +198,11 @@ static unsigned long __peek_user(struct task_struct *child, addr_t addr) * psw and gprs are stored on the stack */ tmp = *(addr_t *)((addr_t) &task_pt_regs(child)->psw + addr); - if (addr == (addr_t) &dummy->regs.psw.mask) + if (addr == (addr_t) &dummy->regs.psw.mask) { /* Return a clean psw mask. */ - tmp = psw_user_bits | (tmp & PSW_MASK_USER); + tmp &= PSW_MASK_USER | PSW_MASK_RI; + tmp |= PSW_USER_BITS; + } } else if (addr < (addr_t) &dummy->regs.orig_gpr2) { /* @@ -239,8 +241,7 @@ static unsigned long __peek_user(struct task_struct *child, addr_t addr) offset = addr - (addr_t) &dummy->regs.fp_regs; tmp = *(addr_t *)((addr_t) &child->thread.fp_regs + offset); if (addr == (addr_t) &dummy->regs.fp_regs.fpc) - tmp &= (unsigned long) FPC_VALID_MASK - << (BITS_PER_LONG - 32); + tmp <<= BITS_PER_LONG - 32; } else if (addr < (addr_t) (&dummy->regs.per_info + 1)) { /* @@ -321,11 +322,15 @@ static int __poke_user(struct task_struct *child, addr_t addr, addr_t data) /* * psw and gprs are stored on the stack */ - if (addr == (addr_t) &dummy->regs.psw.mask && - ((data & ~PSW_MASK_USER) != psw_user_bits || - ((data & PSW_MASK_EA) && !(data & PSW_MASK_BA)))) - /* Invalid psw mask. */ - return -EINVAL; + if (addr == (addr_t) &dummy->regs.psw.mask) { + unsigned long mask = PSW_MASK_USER; + + mask |= is_ri_task(child) ? PSW_MASK_RI : 0; + if ((data & ~mask) != PSW_USER_BITS) + return -EINVAL; + if ((data & PSW_MASK_EA) && !(data & PSW_MASK_BA)) + return -EINVAL; + } *(addr_t *)((addr_t) &task_pt_regs(child)->psw + addr) = data; } else if (addr < (addr_t) (&dummy->regs.orig_gpr2)) { @@ -363,10 +368,10 @@ static int __poke_user(struct task_struct *child, addr_t addr, addr_t data) /* * floating point regs. are stored in the thread structure */ - if (addr == (addr_t) &dummy->regs.fp_regs.fpc && - (data & ~((unsigned long) FPC_VALID_MASK - << (BITS_PER_LONG - 32))) != 0) - return -EINVAL; + if (addr == (addr_t) &dummy->regs.fp_regs.fpc) + if ((unsigned int) data != 0 || + test_fp_ctl(data >> (BITS_PER_LONG - 32))) + return -EINVAL; offset = addr - (addr_t) &dummy->regs.fp_regs; *(addr_t *)((addr_t) &child->thread.fp_regs + offset) = data; @@ -557,7 +562,8 @@ static u32 __peek_user_compat(struct task_struct *child, addr_t addr) if (addr == (addr_t) &dummy32->regs.psw.mask) { /* Fake a 31 bit psw mask. */ tmp = (__u32)(regs->psw.mask >> 32); - tmp = psw32_user_bits | (tmp & PSW32_MASK_USER); + tmp &= PSW32_MASK_USER | PSW32_MASK_RI; + tmp |= PSW32_USER_BITS; } else if (addr == (addr_t) &dummy32->regs.psw.addr) { /* Fake a 31 bit psw address. */ tmp = (__u32) regs->psw.addr | @@ -654,13 +660,16 @@ static int __poke_user_compat(struct task_struct *child, * psw, gprs, acrs and orig_gpr2 are stored on the stack */ if (addr == (addr_t) &dummy32->regs.psw.mask) { + __u32 mask = PSW32_MASK_USER; + + mask |= is_ri_task(child) ? PSW32_MASK_RI : 0; /* Build a 64 bit psw mask from 31 bit mask. */ - if ((tmp & ~PSW32_MASK_USER) != psw32_user_bits) + if ((tmp & ~mask) != PSW32_USER_BITS) /* Invalid psw mask. */ return -EINVAL; regs->psw.mask = (regs->psw.mask & ~PSW_MASK_USER) | (regs->psw.mask & PSW_MASK_BA) | - (__u64)(tmp & PSW32_MASK_USER) << 32; + (__u64)(tmp & mask) << 32; } else if (addr == (addr_t) &dummy32->regs.psw.addr) { /* Build a 64 bit psw address from 31 bit address. */ regs->psw.addr = (__u64) tmp & PSW32_ADDR_INSN; @@ -696,8 +705,7 @@ static int __poke_user_compat(struct task_struct *child, * floating point regs. are stored in the thread structure */ if (addr == (addr_t) &dummy32->regs.fp_regs.fpc && - (tmp & ~FPC_VALID_MASK) != 0) - /* Invalid floating point control. */ + test_fp_ctl(tmp)) return -EINVAL; offset = addr - (addr_t) &dummy32->regs.fp_regs; *(__u32 *)((addr_t) &child->thread.fp_regs + offset) = tmp; @@ -895,8 +903,10 @@ static int s390_fpregs_get(struct task_struct *target, const struct user_regset *regset, unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf) { - if (target == current) - save_fp_regs(&target->thread.fp_regs); + if (target == current) { + save_fp_ctl(&target->thread.fp_regs.fpc); + save_fp_regs(target->thread.fp_regs.fprs); + } return user_regset_copyout(&pos, &count, &kbuf, &ubuf, &target->thread.fp_regs, 0, -1); @@ -909,19 +919,21 @@ static int s390_fpregs_set(struct task_struct *target, { int rc = 0; - if (target == current) - save_fp_regs(&target->thread.fp_regs); + if (target == current) { + save_fp_ctl(&target->thread.fp_regs.fpc); + save_fp_regs(target->thread.fp_regs.fprs); + } /* If setting FPC, must validate it first. */ if (count > 0 && pos < offsetof(s390_fp_regs, fprs)) { - u32 fpc[2] = { target->thread.fp_regs.fpc, 0 }; - rc = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &fpc, + u32 ufpc[2] = { target->thread.fp_regs.fpc, 0 }; + rc = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &ufpc, 0, offsetof(s390_fp_regs, fprs)); if (rc) return rc; - if ((fpc[0] & ~FPC_VALID_MASK) != 0 || fpc[1] != 0) + if (ufpc[1] != 0 || test_fp_ctl(ufpc[0])) return -EINVAL; - target->thread.fp_regs.fpc = fpc[0]; + target->thread.fp_regs.fpc = ufpc[0]; } if (rc == 0 && count > 0) @@ -929,8 +941,10 @@ static int s390_fpregs_set(struct task_struct *target, target->thread.fp_regs.fprs, offsetof(s390_fp_regs, fprs), -1); - if (rc == 0 && target == current) - restore_fp_regs(&target->thread.fp_regs); + if (rc == 0 && target == current) { + restore_fp_ctl(&target->thread.fp_regs.fpc); + restore_fp_regs(target->thread.fp_regs.fprs); + } return rc; } diff --git a/arch/s390/kernel/runtime_instr.c b/arch/s390/kernel/runtime_instr.c index e1c9d1c292f..d817cce7e72 100644 --- a/arch/s390/kernel/runtime_instr.c +++ b/arch/s390/kernel/runtime_instr.c @@ -40,8 +40,6 @@ static void disable_runtime_instr(void) static void init_runtime_instr_cb(struct runtime_instr_cb *cb) { cb->buf_limit = 0xfff; - if (s390_user_mode == HOME_SPACE_MODE) - cb->home_space = 1; cb->int_requested = 1; cb->pstate = 1; cb->pstate_set_buf = 1; diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index aeed8a61fa0..ffe1c53264a 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -64,12 +64,6 @@ #include <asm/sclp.h> #include "entry.h" -long psw_kernel_bits = PSW_DEFAULT_KEY | PSW_MASK_BASE | PSW_ASC_PRIMARY | - PSW_MASK_EA | PSW_MASK_BA; -long psw_user_bits = PSW_MASK_DAT | PSW_MASK_IO | PSW_MASK_EXT | - PSW_DEFAULT_KEY | PSW_MASK_BASE | PSW_MASK_MCHECK | - PSW_MASK_PSTATE | PSW_ASC_HOME; - /* * User copy operations. */ @@ -300,43 +294,14 @@ static int __init parse_vmalloc(char *arg) } early_param("vmalloc", parse_vmalloc); -unsigned int s390_user_mode = PRIMARY_SPACE_MODE; -EXPORT_SYMBOL_GPL(s390_user_mode); - -static void __init set_user_mode_primary(void) -{ - psw_kernel_bits = (psw_kernel_bits & ~PSW_MASK_ASC) | PSW_ASC_HOME; - psw_user_bits = (psw_user_bits & ~PSW_MASK_ASC) | PSW_ASC_PRIMARY; -#ifdef CONFIG_COMPAT - psw32_user_bits = - (psw32_user_bits & ~PSW32_MASK_ASC) | PSW32_ASC_PRIMARY; -#endif - uaccess = MACHINE_HAS_MVCOS ? uaccess_mvcos_switch : uaccess_pt; -} - static int __init early_parse_user_mode(char *p) { - if (p && strcmp(p, "primary") == 0) - s390_user_mode = PRIMARY_SPACE_MODE; - else if (!p || strcmp(p, "home") == 0) - s390_user_mode = HOME_SPACE_MODE; - else - return 1; - return 0; + if (!p || strcmp(p, "primary") == 0) + return 0; + return 1; } early_param("user_mode", early_parse_user_mode); -static void __init setup_addressing_mode(void) -{ - if (s390_user_mode != PRIMARY_SPACE_MODE) - return; - set_user_mode_primary(); - if (MACHINE_HAS_MVCOS) - pr_info("Address spaces switched, mvcos available\n"); - else - pr_info("Address spaces switched, mvcos not available\n"); -} - void *restart_stack __attribute__((__section__(".data"))); static void __init setup_lowcore(void) @@ -348,24 +313,24 @@ static void __init setup_lowcore(void) */ BUILD_BUG_ON(sizeof(struct _lowcore) != LC_PAGES * 4096); lc = __alloc_bootmem_low(LC_PAGES * PAGE_SIZE, LC_PAGES * PAGE_SIZE, 0); - lc->restart_psw.mask = psw_kernel_bits; + lc->restart_psw.mask = PSW_KERNEL_BITS; lc->restart_psw.addr = PSW_ADDR_AMODE | (unsigned long) restart_int_handler; - lc->external_new_psw.mask = psw_kernel_bits | + lc->external_new_psw.mask = PSW_KERNEL_BITS | PSW_MASK_DAT | PSW_MASK_MCHECK; lc->external_new_psw.addr = PSW_ADDR_AMODE | (unsigned long) ext_int_handler; - lc->svc_new_psw.mask = psw_kernel_bits | + lc->svc_new_psw.mask = PSW_KERNEL_BITS | PSW_MASK_DAT | PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK; lc->svc_new_psw.addr = PSW_ADDR_AMODE | (unsigned long) system_call; - lc->program_new_psw.mask = psw_kernel_bits | + lc->program_new_psw.mask = PSW_KERNEL_BITS | PSW_MASK_DAT | PSW_MASK_MCHECK; lc->program_new_psw.addr = PSW_ADDR_AMODE | (unsigned long) pgm_check_handler; - lc->mcck_new_psw.mask = psw_kernel_bits; + lc->mcck_new_psw.mask = PSW_KERNEL_BITS; lc->mcck_new_psw.addr = PSW_ADDR_AMODE | (unsigned long) mcck_int_handler; - lc->io_new_psw.mask = psw_kernel_bits | + lc->io_new_psw.mask = PSW_KERNEL_BITS | PSW_MASK_DAT | PSW_MASK_MCHECK; lc->io_new_psw.addr = PSW_ADDR_AMODE | (unsigned long) io_int_handler; lc->clock_comparator = -1ULL; @@ -1043,10 +1008,7 @@ void __init setup_arch(char **cmdline_p) init_mm.end_data = (unsigned long) &_edata; init_mm.brk = (unsigned long) &_end; - if (MACHINE_HAS_MVCOS) - memcpy(&uaccess, &uaccess_mvcos, sizeof(uaccess)); - else - memcpy(&uaccess, &uaccess_std, sizeof(uaccess)); + uaccess = MACHINE_HAS_MVCOS ? uaccess_mvcos : uaccess_pt; parse_early_param(); detect_memory_layout(memory_chunk, memory_end); @@ -1054,7 +1016,6 @@ void __init setup_arch(char **cmdline_p) setup_ipl(); reserve_oldmem(); setup_memory_end(); - setup_addressing_mode(); reserve_crashkernel(); setup_memory(); setup_resources(); diff --git a/arch/s390/kernel/signal.c b/arch/s390/kernel/signal.c index c45becf82e0..fb535874a24 100644 --- a/arch/s390/kernel/signal.c +++ b/arch/s390/kernel/signal.c @@ -57,40 +57,48 @@ static int save_sigregs(struct pt_regs *regs, _sigregs __user *sregs) /* Copy a 'clean' PSW mask to the user to avoid leaking information about whether PER is currently on. */ - user_sregs.regs.psw.mask = psw_user_bits | - (regs->psw.mask & PSW_MASK_USER); + user_sregs.regs.psw.mask = PSW_USER_BITS | + (regs->psw.mask & (PSW_MASK_USER | PSW_MASK_RI)); user_sregs.regs.psw.addr = regs->psw.addr; memcpy(&user_sregs.regs.gprs, ®s->gprs, sizeof(sregs->regs.gprs)); memcpy(&user_sregs.regs.acrs, current->thread.acrs, - sizeof(sregs->regs.acrs)); + sizeof(user_sregs.regs.acrs)); /* * We have to store the fp registers to current->thread.fp_regs * to merge them with the emulated registers. */ - save_fp_regs(¤t->thread.fp_regs); + save_fp_ctl(¤t->thread.fp_regs.fpc); + save_fp_regs(current->thread.fp_regs.fprs); memcpy(&user_sregs.fpregs, ¤t->thread.fp_regs, - sizeof(s390_fp_regs)); - return __copy_to_user(sregs, &user_sregs, sizeof(_sigregs)); + sizeof(user_sregs.fpregs)); + if (__copy_to_user(sregs, &user_sregs, sizeof(_sigregs))) + return -EFAULT; + return 0; } -/* Returns positive number on error */ static int restore_sigregs(struct pt_regs *regs, _sigregs __user *sregs) { - int err; _sigregs user_sregs; /* Alwys make any pending restarted system call return -EINTR */ current_thread_info()->restart_block.fn = do_no_restart_syscall; - err = __copy_from_user(&user_sregs, sregs, sizeof(_sigregs)); - if (err) - return err; - /* Use regs->psw.mask instead of psw_user_bits to preserve PER bit. */ + if (__copy_from_user(&user_sregs, sregs, sizeof(user_sregs))) + return -EFAULT; + + if (!is_ri_task(current) && (user_sregs.regs.psw.mask & PSW_MASK_RI)) + return -EINVAL; + + /* Loading the floating-point-control word can fail. Do that first. */ + if (restore_fp_ctl(&user_sregs.fpregs.fpc)) + return -EINVAL; + + /* Use regs->psw.mask instead of PSW_USER_BITS to preserve PER bit. */ regs->psw.mask = (regs->psw.mask & ~PSW_MASK_USER) | - (user_sregs.regs.psw.mask & PSW_MASK_USER); + (user_sregs.regs.psw.mask & (PSW_MASK_USER | PSW_MASK_RI)); /* Check for invalid user address space control. */ - if ((regs->psw.mask & PSW_MASK_ASC) >= (psw_kernel_bits & PSW_MASK_ASC)) - regs->psw.mask = (psw_user_bits & PSW_MASK_ASC) | + if ((regs->psw.mask & PSW_MASK_ASC) == PSW_ASC_HOME) + regs->psw.mask = PSW_ASC_PRIMARY | (regs->psw.mask & ~PSW_MASK_ASC); /* Check for invalid amode */ if (regs->psw.mask & PSW_MASK_EA) @@ -98,14 +106,13 @@ static int restore_sigregs(struct pt_regs *regs, _sigregs __user *sregs) regs->psw.addr = user_sregs.regs.psw.addr; memcpy(®s->gprs, &user_sregs.regs.gprs, sizeof(sregs->regs.gprs)); memcpy(¤t->thread.acrs, &user_sregs.regs.acrs, - sizeof(sregs->regs.acrs)); + sizeof(current->thread.acrs)); restore_access_regs(current->thread.acrs); memcpy(¤t->thread.fp_regs, &user_sregs.fpregs, - sizeof(s390_fp_regs)); - current->thread.fp_regs.fpc &= FPC_VALID_MASK; + sizeof(current->thread.fp_regs)); - restore_fp_regs(¤t->thread.fp_regs); + restore_fp_regs(current->thread.fp_regs.fprs); clear_thread_flag(TIF_SYSCALL); /* No longer in a system call */ return 0; } @@ -224,7 +231,7 @@ static int setup_frame(int sig, struct k_sigaction *ka, regs->gprs[15] = (unsigned long) frame; /* Force default amode and default user address space control. */ regs->psw.mask = PSW_MASK_EA | PSW_MASK_BA | - (psw_user_bits & PSW_MASK_ASC) | + (PSW_USER_BITS & PSW_MASK_ASC) | (regs->psw.mask & ~PSW_MASK_ASC); regs->psw.addr = (unsigned long) ka->sa.sa_handler | PSW_ADDR_AMODE; @@ -295,7 +302,7 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, regs->gprs[15] = (unsigned long) frame; /* Force default amode and default user address space control. */ regs->psw.mask = PSW_MASK_EA | PSW_MASK_BA | - (psw_user_bits & PSW_MASK_ASC) | + (PSW_USER_BITS & PSW_MASK_ASC) | (regs->psw.mask & ~PSW_MASK_ASC); regs->psw.addr = (unsigned long) ka->sa.sa_handler | PSW_ADDR_AMODE; diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index 1a4313a1b60..dc4a5346506 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -283,7 +283,7 @@ static void pcpu_delegate(struct pcpu *pcpu, void (*func)(void *), struct _lowcore *lc = lowcore_ptr[pcpu - pcpu_devices]; unsigned long source_cpu = stap(); - __load_psw_mask(psw_kernel_bits); + __load_psw_mask(PSW_KERNEL_BITS); if (pcpu->address == source_cpu) func(data); /* should not return */ /* Stop target cpu (if func returns this stops the current cpu). */ @@ -395,7 +395,7 @@ void smp_send_stop(void) int cpu; /* Disable all interrupts/machine checks */ - __load_psw_mask(psw_kernel_bits | PSW_MASK_DAT); + __load_psw_mask(PSW_KERNEL_BITS | PSW_MASK_DAT); trace_hardirqs_off(); debug_set_critical(); @@ -533,9 +533,6 @@ EXPORT_SYMBOL(smp_ctl_clear_bit); #if defined(CONFIG_ZFCPDUMP) || defined(CONFIG_CRASH_DUMP) -struct save_area *zfcpdump_save_areas[NR_CPUS + 1]; -EXPORT_SYMBOL_GPL(zfcpdump_save_areas); - static void __init smp_get_save_area(int cpu, u16 address) { void *lc = pcpu_devices[0].lowcore; @@ -546,15 +543,9 @@ static void __init smp_get_save_area(int cpu, u16 address) if (!OLDMEM_BASE && (address == boot_cpu_address || ipl_info.type != IPL_TYPE_FCP_DUMP)) return; - if (cpu >= NR_CPUS) { - pr_warning("CPU %i exceeds the maximum %i and is excluded " - "from the dump\n", cpu, NR_CPUS - 1); - return; - } - save_area = kmalloc(sizeof(struct save_area), GFP_KERNEL); + save_area = dump_save_area_create(cpu); if (!save_area) panic("could not allocate memory for save area\n"); - zfcpdump_save_areas[cpu] = save_area; #ifdef CONFIG_CRASH_DUMP if (address == boot_cpu_address) { /* Copy the registers of the boot cpu. */ @@ -693,7 +684,7 @@ static void smp_start_secondary(void *cpuvoid) S390_lowcore.restart_source = -1UL; restore_access_regs(S390_lowcore.access_regs_save_area); __ctl_load(S390_lowcore.cregs_save_area, 0, 15); - __load_psw_mask(psw_kernel_bits | PSW_MASK_DAT); + __load_psw_mask(PSW_KERNEL_BITS | PSW_MASK_DAT); cpu_init(); preempt_disable(); init_cpu_timer(); @@ -929,7 +920,7 @@ static ssize_t show_idle_count(struct device *dev, idle_count = ACCESS_ONCE(idle->idle_count); if (ACCESS_ONCE(idle->clock_idle_enter)) idle_count++; - } while ((sequence & 1) || (idle->sequence != sequence)); + } while ((sequence & 1) || (ACCESS_ONCE(idle->sequence) != sequence)); return sprintf(buf, "%llu\n", idle_count); } static DEVICE_ATTR(idle_count, 0444, show_idle_count, NULL); @@ -947,7 +938,7 @@ static ssize_t show_idle_time(struct device *dev, idle_time = ACCESS_ONCE(idle->idle_time); idle_enter = ACCESS_ONCE(idle->clock_idle_enter); idle_exit = ACCESS_ONCE(idle->clock_idle_exit); - } while ((sequence & 1) || (idle->sequence != sequence)); + } while ((sequence & 1) || (ACCESS_ONCE(idle->sequence) != sequence)); idle_time += idle_enter ? ((idle_exit ? : now) - idle_enter) : 0; return sprintf(buf, "%llu\n", idle_time >> 12); } diff --git a/arch/s390/kernel/vdso.c b/arch/s390/kernel/vdso.c index 05d75c41313..a84476f2a9b 100644 --- a/arch/s390/kernel/vdso.c +++ b/arch/s390/kernel/vdso.c @@ -84,8 +84,7 @@ struct vdso_data *vdso_data = &vdso_data_store.data; */ static void vdso_init_data(struct vdso_data *vd) { - vd->ectg_available = - s390_user_mode != HOME_SPACE_MODE && test_facility(31); + vd->ectg_available = test_facility(31); } #ifdef CONFIG_64BIT @@ -102,7 +101,7 @@ int vdso_alloc_per_cpu(struct _lowcore *lowcore) lowcore->vdso_per_cpu_data = __LC_PASTE; - if (s390_user_mode == HOME_SPACE_MODE || !vdso_enabled) + if (!vdso_enabled) return 0; segment_table = __get_free_pages(GFP_KERNEL, SEGMENT_ORDER); @@ -147,7 +146,7 @@ void vdso_free_per_cpu(struct _lowcore *lowcore) unsigned long segment_table, page_table, page_frame; u32 *psal, *aste; - if (s390_user_mode == HOME_SPACE_MODE || !vdso_enabled) + if (!vdso_enabled) return; psal = (u32 *)(addr_t) lowcore->paste[4]; @@ -165,7 +164,7 @@ static void vdso_init_cr5(void) { unsigned long cr5; - if (s390_user_mode == HOME_SPACE_MODE || !vdso_enabled) + if (!vdso_enabled) return; cr5 = offsetof(struct _lowcore, paste); __ctl_load(cr5, 5, 5); diff --git a/arch/s390/kernel/vtime.c b/arch/s390/kernel/vtime.c index abcfab55f99..8c34363d6f1 100644 --- a/arch/s390/kernel/vtime.c +++ b/arch/s390/kernel/vtime.c @@ -161,7 +161,7 @@ void __kprobes vtime_stop_cpu(void) trace_hardirqs_on(); /* Wait for external, I/O or machine check interrupt. */ - psw_mask = psw_kernel_bits | PSW_MASK_WAIT | PSW_MASK_DAT | + psw_mask = PSW_KERNEL_BITS | PSW_MASK_WAIT | PSW_MASK_DAT | PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK; idle->nohz_delay = 0; @@ -191,7 +191,7 @@ cputime64_t s390_get_idle_time(int cpu) sequence = ACCESS_ONCE(idle->sequence); idle_enter = ACCESS_ONCE(idle->clock_idle_enter); idle_exit = ACCESS_ONCE(idle->clock_idle_exit); - } while ((sequence & 1) || (idle->sequence != sequence)); + } while ((sequence & 1) || (ACCESS_ONCE(idle->sequence) != sequence)); return idle_enter ? ((idle_exit ?: now) - idle_enter) : 0; } diff --git a/arch/s390/kvm/interrupt.c b/arch/s390/kvm/interrupt.c index 7f35cb33e51..7f1f7ac5cf7 100644 --- a/arch/s390/kvm/interrupt.c +++ b/arch/s390/kvm/interrupt.c @@ -385,7 +385,7 @@ static int kvm_cpu_has_interrupt(struct kvm_vcpu *vcpu) } if ((!rc) && (vcpu->arch.sie_block->ckc < - get_tod_clock() + vcpu->arch.sie_block->epoch)) { + get_tod_clock_fast() + vcpu->arch.sie_block->epoch)) { if ((!psw_extint_disabled(vcpu)) && (vcpu->arch.sie_block->gcr[0] & 0x800ul)) rc = 1; @@ -425,7 +425,7 @@ int kvm_s390_handle_wait(struct kvm_vcpu *vcpu) goto no_timer; } - now = get_tod_clock() + vcpu->arch.sie_block->epoch; + now = get_tod_clock_fast() + vcpu->arch.sie_block->epoch; if (vcpu->arch.sie_block->ckc < now) { __unset_cpu_idle(vcpu); return 0; @@ -515,7 +515,7 @@ void kvm_s390_deliver_pending_interrupts(struct kvm_vcpu *vcpu) } if ((vcpu->arch.sie_block->ckc < - get_tod_clock() + vcpu->arch.sie_block->epoch)) + get_tod_clock_fast() + vcpu->arch.sie_block->epoch)) __try_deliver_ckc_interrupt(vcpu); if (atomic_read(&fi->active)) { diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c index 776dafe918d..ed8064cb5c4 100644 --- a/arch/s390/kvm/kvm-s390.c +++ b/arch/s390/kvm/kvm-s390.c @@ -343,10 +343,11 @@ void kvm_arch_vcpu_uninit(struct kvm_vcpu *vcpu) void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu) { - save_fp_regs(&vcpu->arch.host_fpregs); + save_fp_ctl(&vcpu->arch.host_fpregs.fpc); + save_fp_regs(vcpu->arch.host_fpregs.fprs); save_access_regs(vcpu->arch.host_acrs); - vcpu->arch.guest_fpregs.fpc &= FPC_VALID_MASK; - restore_fp_regs(&vcpu->arch.guest_fpregs); + restore_fp_ctl(&vcpu->arch.guest_fpregs.fpc); + restore_fp_regs(vcpu->arch.guest_fpregs.fprs); restore_access_regs(vcpu->run->s.regs.acrs); gmap_enable(vcpu->arch.gmap); atomic_set_mask(CPUSTAT_RUNNING, &vcpu->arch.sie_block->cpuflags); @@ -356,9 +357,11 @@ void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu) { atomic_clear_mask(CPUSTAT_RUNNING, &vcpu->arch.sie_block->cpuflags); gmap_disable(vcpu->arch.gmap); - save_fp_regs(&vcpu->arch.guest_fpregs); + save_fp_ctl(&vcpu->arch.guest_fpregs.fpc); + save_fp_regs(vcpu->arch.guest_fpregs.fprs); save_access_regs(vcpu->run->s.regs.acrs); - restore_fp_regs(&vcpu->arch.host_fpregs); + restore_fp_ctl(&vcpu->arch.host_fpregs.fpc); + restore_fp_regs(vcpu->arch.host_fpregs.fprs); restore_access_regs(vcpu->arch.host_acrs); } @@ -618,9 +621,12 @@ int kvm_arch_vcpu_ioctl_get_sregs(struct kvm_vcpu *vcpu, int kvm_arch_vcpu_ioctl_set_fpu(struct kvm_vcpu *vcpu, struct kvm_fpu *fpu) { + if (test_fp_ctl(fpu->fpc)) + return -EINVAL; memcpy(&vcpu->arch.guest_fpregs.fprs, &fpu->fprs, sizeof(fpu->fprs)); - vcpu->arch.guest_fpregs.fpc = fpu->fpc & FPC_VALID_MASK; - restore_fp_regs(&vcpu->arch.guest_fpregs); + vcpu->arch.guest_fpregs.fpc = fpu->fpc; + restore_fp_ctl(&vcpu->arch.guest_fpregs.fpc); + restore_fp_regs(vcpu->arch.guest_fpregs.fprs); return 0; } @@ -876,7 +882,8 @@ int kvm_s390_vcpu_store_status(struct kvm_vcpu *vcpu, unsigned long addr) * copying in vcpu load/put. Lets update our copies before we save * it into the save area */ - save_fp_regs(&vcpu->arch.guest_fpregs); + save_fp_ctl(&vcpu->arch.guest_fpregs.fpc); + save_fp_regs(vcpu->arch.guest_fpregs.fprs); save_access_regs(vcpu->run->s.regs.acrs); if (__guestcopy(vcpu, addr + offsetof(struct save_area, fp_regs), diff --git a/arch/s390/kvm/trace.h b/arch/s390/kvm/trace.h index c2f582bb1cb..0c991c6748a 100644 --- a/arch/s390/kvm/trace.h +++ b/arch/s390/kvm/trace.h @@ -4,6 +4,7 @@ #include <linux/tracepoint.h> #include <asm/sigp.h> #include <asm/debug.h> +#include <asm/dis.h> #undef TRACE_SYSTEM #define TRACE_SYSTEM kvm diff --git a/arch/s390/lib/Makefile b/arch/s390/lib/Makefile index 20b0e97a7df..b068729e50a 100644 --- a/arch/s390/lib/Makefile +++ b/arch/s390/lib/Makefile @@ -2,7 +2,7 @@ # Makefile for s390-specific library files.. # -lib-y += delay.o string.o uaccess_std.o uaccess_pt.o +lib-y += delay.o string.o uaccess_pt.o find.o obj-$(CONFIG_32BIT) += div64.o qrnnd.o ucmpdi2.o mem32.o obj-$(CONFIG_64BIT) += mem64.o lib-$(CONFIG_64BIT) += uaccess_mvcos.o diff --git a/arch/s390/lib/delay.c b/arch/s390/lib/delay.c index 57c87d7d7ed..a9f3d0042d5 100644 --- a/arch/s390/lib/delay.c +++ b/arch/s390/lib/delay.c @@ -44,7 +44,7 @@ static void __udelay_disabled(unsigned long long usecs) do { set_clock_comparator(end); vtime_stop_cpu(); - } while (get_tod_clock() < end); + } while (get_tod_clock_fast() < end); lockdep_on(); __ctl_load(cr0, 0, 0); __ctl_load(cr6, 6, 6); @@ -55,7 +55,7 @@ static void __udelay_enabled(unsigned long long usecs) { u64 clock_saved, end; - end = get_tod_clock() + (usecs << 12); + end = get_tod_clock_fast() + (usecs << 12); do { clock_saved = 0; if (end < S390_lowcore.clock_comparator) { @@ -65,7 +65,7 @@ static void __udelay_enabled(unsigned long long usecs) vtime_stop_cpu(); if (clock_saved) local_tick_enable(clock_saved); - } while (get_tod_clock() < end); + } while (get_tod_clock_fast() < end); } /* @@ -109,8 +109,8 @@ void udelay_simple(unsigned long long usecs) { u64 end; - end = get_tod_clock() + (usecs << 12); - while (get_tod_clock() < end) + end = get_tod_clock_fast() + (usecs << 12); + while (get_tod_clock_fast() < end) cpu_relax(); } @@ -120,10 +120,10 @@ void __ndelay(unsigned long long nsecs) nsecs <<= 9; do_div(nsecs, 125); - end = get_tod_clock() + nsecs; + end = get_tod_clock_fast() + nsecs; if (nsecs & ~0xfffUL) __udelay(nsecs >> 12); - while (get_tod_clock() < end) + while (get_tod_clock_fast() < end) barrier(); } EXPORT_SYMBOL(__ndelay); diff --git a/arch/s390/lib/find.c b/arch/s390/lib/find.c new file mode 100644 index 00000000000..620d34d6487 --- /dev/null +++ b/arch/s390/lib/find.c @@ -0,0 +1,77 @@ +/* + * MSB0 numbered special bitops handling. + * + * On s390x the bits are numbered: + * |0..............63|64............127|128...........191|192...........255| + * and on s390: + * |0.....31|31....63|64....95|96...127|128..159|160..191|192..223|224..255| + * + * The reason for this bit numbering is the fact that the hardware sets bits + * in a bitmap starting at bit 0 (MSB) and we don't want to scan the bitmap + * from the 'wrong end'. + */ + +#include <linux/compiler.h> +#include <linux/bitops.h> +#include <linux/export.h> + +unsigned long find_first_bit_inv(const unsigned long *addr, unsigned long size) +{ + const unsigned long *p = addr; + unsigned long result = 0; + unsigned long tmp; + + while (size & ~(BITS_PER_LONG - 1)) { + if ((tmp = *(p++))) + goto found; + result += BITS_PER_LONG; + size -= BITS_PER_LONG; + } + if (!size) + return result; + tmp = (*p) & (~0UL << (BITS_PER_LONG - size)); + if (!tmp) /* Are any bits set? */ + return result + size; /* Nope. */ +found: + return result + (__fls(tmp) ^ (BITS_PER_LONG - 1)); +} +EXPORT_SYMBOL(find_first_bit_inv); + +unsigned long find_next_bit_inv(const unsigned long *addr, unsigned long size, + unsigned long offset) +{ + const unsigned long *p = addr + (offset / BITS_PER_LONG); + unsigned long result = offset & ~(BITS_PER_LONG - 1); + unsigned long tmp; + + if (offset >= size) + return size; + size -= result; + offset %= BITS_PER_LONG; + if (offset) { + tmp = *(p++); + tmp &= (~0UL >> offset); + if (size < BITS_PER_LONG) + goto found_first; + if (tmp) + goto found_middle; + size -= BITS_PER_LONG; + result += BITS_PER_LONG; + } + while (size & ~(BITS_PER_LONG-1)) { + if ((tmp = *(p++))) + goto found_middle; + result += BITS_PER_LONG; + size -= BITS_PER_LONG; + } + if (!size) + return result; + tmp = *p; +found_first: + tmp &= (~0UL << (BITS_PER_LONG - size)); + if (!tmp) /* Are any bits set? */ + return result + size; /* Nope. */ +found_middle: + return result + (__fls(tmp) ^ (BITS_PER_LONG - 1)); +} +EXPORT_SYMBOL(find_next_bit_inv); diff --git a/arch/s390/lib/uaccess_mvcos.c b/arch/s390/lib/uaccess_mvcos.c index 1829742bf47..4b7993bf69b 100644 --- a/arch/s390/lib/uaccess_mvcos.c +++ b/arch/s390/lib/uaccess_mvcos.c @@ -65,13 +65,6 @@ static size_t copy_from_user_mvcos(size_t size, const void __user *ptr, void *x) return size; } -static size_t copy_from_user_mvcos_check(size_t size, const void __user *ptr, void *x) -{ - if (size <= 256) - return copy_from_user_std(size, ptr, x); - return copy_from_user_mvcos(size, ptr, x); -} - static size_t copy_to_user_mvcos(size_t size, void __user *ptr, const void *x) { register unsigned long reg0 asm("0") = 0x810000UL; @@ -101,14 +94,6 @@ static size_t copy_to_user_mvcos(size_t size, void __user *ptr, const void *x) return size; } -static size_t copy_to_user_mvcos_check(size_t size, void __user *ptr, - const void *x) -{ - if (size <= 256) - return copy_to_user_std(size, ptr, x); - return copy_to_user_mvcos(size, ptr, x); -} - static size_t copy_in_user_mvcos(size_t size, void __user *to, const void __user *from) { @@ -201,23 +186,8 @@ static size_t strncpy_from_user_mvcos(size_t count, const char __user *src, } struct uaccess_ops uaccess_mvcos = { - .copy_from_user = copy_from_user_mvcos_check, - .copy_from_user_small = copy_from_user_std, - .copy_to_user = copy_to_user_mvcos_check, - .copy_to_user_small = copy_to_user_std, - .copy_in_user = copy_in_user_mvcos, - .clear_user = clear_user_mvcos, - .strnlen_user = strnlen_user_std, - .strncpy_from_user = strncpy_from_user_std, - .futex_atomic_op = futex_atomic_op_std, - .futex_atomic_cmpxchg = futex_atomic_cmpxchg_std, -}; - -struct uaccess_ops uaccess_mvcos_switch = { .copy_from_user = copy_from_user_mvcos, - .copy_from_user_small = copy_from_user_mvcos, .copy_to_user = copy_to_user_mvcos, - .copy_to_user_small = copy_to_user_mvcos, .copy_in_user = copy_in_user_mvcos, .clear_user = clear_user_mvcos, .strnlen_user = strnlen_user_mvcos, diff --git a/arch/s390/lib/uaccess_pt.c b/arch/s390/lib/uaccess_pt.c index 1694d738b17..97e03caf782 100644 --- a/arch/s390/lib/uaccess_pt.c +++ b/arch/s390/lib/uaccess_pt.c @@ -461,9 +461,7 @@ int futex_atomic_cmpxchg_pt(u32 *uval, u32 __user *uaddr, struct uaccess_ops uaccess_pt = { .copy_from_user = copy_from_user_pt, - .copy_from_user_small = copy_from_user_pt, .copy_to_user = copy_to_user_pt, - .copy_to_user_small = copy_to_user_pt, .copy_in_user = copy_in_user_pt, .clear_user = clear_user_pt, .strnlen_user = strnlen_user_pt, diff --git a/arch/s390/lib/uaccess_std.c b/arch/s390/lib/uaccess_std.c deleted file mode 100644 index 4a75d475b06..00000000000 --- a/arch/s390/lib/uaccess_std.c +++ /dev/null @@ -1,305 +0,0 @@ -/* - * Standard user space access functions based on mvcp/mvcs and doing - * interesting things in the secondary space mode. - * - * Copyright IBM Corp. 2006 - * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com), - * Gerald Schaefer (gerald.schaefer@de.ibm.com) - */ - -#include <linux/errno.h> -#include <linux/mm.h> -#include <linux/uaccess.h> -#include <asm/futex.h> -#include "uaccess.h" - -#ifndef CONFIG_64BIT -#define AHI "ahi" -#define ALR "alr" -#define CLR "clr" -#define LHI "lhi" -#define SLR "slr" -#else -#define AHI "aghi" -#define ALR "algr" -#define CLR "clgr" -#define LHI "lghi" -#define SLR "slgr" -#endif - -size_t copy_from_user_std(size_t size, const void __user *ptr, void *x) -{ - unsigned long tmp1, tmp2; - - tmp1 = -256UL; - asm volatile( - "0: mvcp 0(%0,%2),0(%1),%3\n" - "10:jz 8f\n" - "1:"ALR" %0,%3\n" - " la %1,256(%1)\n" - " la %2,256(%2)\n" - "2: mvcp 0(%0,%2),0(%1),%3\n" - "11:jnz 1b\n" - " j 8f\n" - "3: la %4,255(%1)\n" /* %4 = ptr + 255 */ - " "LHI" %3,-4096\n" - " nr %4,%3\n" /* %4 = (ptr + 255) & -4096 */ - " "SLR" %4,%1\n" - " "CLR" %0,%4\n" /* copy crosses next page boundary? */ - " jnh 5f\n" - "4: mvcp 0(%4,%2),0(%1),%3\n" - "12:"SLR" %0,%4\n" - " "ALR" %2,%4\n" - "5:"LHI" %4,-1\n" - " "ALR" %4,%0\n" /* copy remaining size, subtract 1 */ - " bras %3,7f\n" /* memset loop */ - " xc 0(1,%2),0(%2)\n" - "6: xc 0(256,%2),0(%2)\n" - " la %2,256(%2)\n" - "7:"AHI" %4,-256\n" - " jnm 6b\n" - " ex %4,0(%3)\n" - " j 9f\n" - "8:"SLR" %0,%0\n" - "9: \n" - EX_TABLE(0b,3b) EX_TABLE(2b,3b) EX_TABLE(4b,5b) - EX_TABLE(10b,3b) EX_TABLE(11b,3b) EX_TABLE(12b,5b) - : "+a" (size), "+a" (ptr), "+a" (x), "+a" (tmp1), "=a" (tmp2) - : : "cc", "memory"); - return size; -} - -static size_t copy_from_user_std_check(size_t size, const void __user *ptr, - void *x) -{ - if (size <= 1024) - return copy_from_user_std(size, ptr, x); - return copy_from_user_pt(size, ptr, x); -} - -size_t copy_to_user_std(size_t size, void __user *ptr, const void *x) -{ - unsigned long tmp1, tmp2; - - tmp1 = -256UL; - asm volatile( - "0: mvcs 0(%0,%1),0(%2),%3\n" - "7: jz 5f\n" - "1:"ALR" %0,%3\n" - " la %1,256(%1)\n" - " la %2,256(%2)\n" - "2: mvcs 0(%0,%1),0(%2),%3\n" - "8: jnz 1b\n" - " j 5f\n" - "3: la %4,255(%1)\n" /* %4 = ptr + 255 */ - " "LHI" %3,-4096\n" - " nr %4,%3\n" /* %4 = (ptr + 255) & -4096 */ - " "SLR" %4,%1\n" - " "CLR" %0,%4\n" /* copy crosses next page boundary? */ - " jnh 6f\n" - "4: mvcs 0(%4,%1),0(%2),%3\n" - "9:"SLR" %0,%4\n" - " j 6f\n" - "5:"SLR" %0,%0\n" - "6: \n" - EX_TABLE(0b,3b) EX_TABLE(2b,3b) EX_TABLE(4b,6b) - EX_TABLE(7b,3b) EX_TABLE(8b,3b) EX_TABLE(9b,6b) - : "+a" (size), "+a" (ptr), "+a" (x), "+a" (tmp1), "=a" (tmp2) - : : "cc", "memory"); - return size; -} - -static size_t copy_to_user_std_check(size_t size, void __user *ptr, - const void *x) -{ - if (size <= 1024) - return copy_to_user_std(size, ptr, x); - return copy_to_user_pt(size, ptr, x); -} - -static size_t copy_in_user_std(size_t size, void __user *to, - const void __user *from) -{ - unsigned long tmp1; - - asm volatile( - " sacf 256\n" - " "AHI" %0,-1\n" - " jo 5f\n" - " bras %3,3f\n" - "0:"AHI" %0,257\n" - "1: mvc 0(1,%1),0(%2)\n" - " la %1,1(%1)\n" - " la %2,1(%2)\n" - " "AHI" %0,-1\n" - " jnz 1b\n" - " j 5f\n" - "2: mvc 0(256,%1),0(%2)\n" - " la %1,256(%1)\n" - " la %2,256(%2)\n" - "3:"AHI" %0,-256\n" - " jnm 2b\n" - "4: ex %0,1b-0b(%3)\n" - "5: "SLR" %0,%0\n" - "6: sacf 0\n" - EX_TABLE(1b,6b) EX_TABLE(2b,0b) EX_TABLE(4b,0b) - : "+a" (size), "+a" (to), "+a" (from), "=a" (tmp1) - : : "cc", "memory"); - return size; -} - -static size_t clear_user_std(size_t size, void __user *to) -{ - unsigned long tmp1, tmp2; - - asm volatile( - " sacf 256\n" - " "AHI" %0,-1\n" - " jo 5f\n" - " bras %3,3f\n" - " xc 0(1,%1),0(%1)\n" - "0:"AHI" %0,257\n" - " la %2,255(%1)\n" /* %2 = ptr + 255 */ - " srl %2,12\n" - " sll %2,12\n" /* %2 = (ptr + 255) & -4096 */ - " "SLR" %2,%1\n" - " "CLR" %0,%2\n" /* clear crosses next page boundary? */ - " jnh 5f\n" - " "AHI" %2,-1\n" - "1: ex %2,0(%3)\n" - " "AHI" %2,1\n" - " "SLR" %0,%2\n" - " j 5f\n" - "2: xc 0(256,%1),0(%1)\n" - " la %1,256(%1)\n" - "3:"AHI" %0,-256\n" - " jnm 2b\n" - "4: ex %0,0(%3)\n" - "5: "SLR" %0,%0\n" - "6: sacf 0\n" - EX_TABLE(1b,6b) EX_TABLE(2b,0b) EX_TABLE(4b,0b) - : "+a" (size), "+a" (to), "=a" (tmp1), "=a" (tmp2) - : : "cc", "memory"); - return size; -} - -size_t strnlen_user_std(size_t size, const char __user *src) -{ - register unsigned long reg0 asm("0") = 0UL; - unsigned long tmp1, tmp2; - - if (unlikely(!size)) - return 0; - asm volatile( - " la %2,0(%1)\n" - " la %3,0(%0,%1)\n" - " "SLR" %0,%0\n" - " sacf 256\n" - "0: srst %3,%2\n" - " jo 0b\n" - " la %0,1(%3)\n" /* strnlen_user results includes \0 */ - " "SLR" %0,%1\n" - "1: sacf 0\n" - EX_TABLE(0b,1b) - : "+a" (size), "+a" (src), "=a" (tmp1), "=a" (tmp2) - : "d" (reg0) : "cc", "memory"); - return size; -} - -size_t strncpy_from_user_std(size_t count, const char __user *src, char *dst) -{ - size_t done, len, offset, len_str; - - if (unlikely(!count)) - return 0; - done = 0; - do { - offset = (size_t)src & ~PAGE_MASK; - len = min(count - done, PAGE_SIZE - offset); - if (copy_from_user_std(len, src, dst)) - return -EFAULT; - len_str = strnlen(dst, len); - done += len_str; - src += len_str; - dst += len_str; - } while ((len_str == len) && (done < count)); - return done; -} - -#define __futex_atomic_op(insn, ret, oldval, newval, uaddr, oparg) \ - asm volatile( \ - " sacf 256\n" \ - "0: l %1,0(%6)\n" \ - "1:"insn \ - "2: cs %1,%2,0(%6)\n" \ - "3: jl 1b\n" \ - " lhi %0,0\n" \ - "4: sacf 0\n" \ - EX_TABLE(0b,4b) EX_TABLE(2b,4b) EX_TABLE(3b,4b) \ - : "=d" (ret), "=&d" (oldval), "=&d" (newval), \ - "=m" (*uaddr) \ - : "0" (-EFAULT), "d" (oparg), "a" (uaddr), \ - "m" (*uaddr) : "cc"); - -int futex_atomic_op_std(int op, u32 __user *uaddr, int oparg, int *old) -{ - int oldval = 0, newval, ret; - - switch (op) { - case FUTEX_OP_SET: - __futex_atomic_op("lr %2,%5\n", - ret, oldval, newval, uaddr, oparg); - break; - case FUTEX_OP_ADD: - __futex_atomic_op("lr %2,%1\nar %2,%5\n", - ret, oldval, newval, uaddr, oparg); - break; - case FUTEX_OP_OR: - __futex_atomic_op("lr %2,%1\nor %2,%5\n", - ret, oldval, newval, uaddr, oparg); - break; - case FUTEX_OP_ANDN: - __futex_atomic_op("lr %2,%1\nnr %2,%5\n", - ret, oldval, newval, uaddr, oparg); - break; - case FUTEX_OP_XOR: - __futex_atomic_op("lr %2,%1\nxr %2,%5\n", - ret, oldval, newval, uaddr, oparg); - break; - default: - ret = -ENOSYS; - } - *old = oldval; - return ret; -} - -int futex_atomic_cmpxchg_std(u32 *uval, u32 __user *uaddr, - u32 oldval, u32 newval) -{ - int ret; - - asm volatile( - " sacf 256\n" - "0: cs %1,%4,0(%5)\n" - "1: la %0,0\n" - "2: sacf 0\n" - EX_TABLE(0b,2b) EX_TABLE(1b,2b) - : "=d" (ret), "+d" (oldval), "=m" (*uaddr) - : "0" (-EFAULT), "d" (newval), "a" (uaddr), "m" (*uaddr) - : "cc", "memory" ); - *uval = oldval; - return ret; -} - -struct uaccess_ops uaccess_std = { - .copy_from_user = copy_from_user_std_check, - .copy_from_user_small = copy_from_user_std, - .copy_to_user = copy_to_user_std_check, - .copy_to_user_small = copy_to_user_std, - .copy_in_user = copy_in_user_std, - .clear_user = clear_user_std, - .strnlen_user = strnlen_user_std, - .strncpy_from_user = strncpy_from_user_std, - .futex_atomic_op = futex_atomic_op_std, - .futex_atomic_cmpxchg = futex_atomic_cmpxchg_std, -}; diff --git a/arch/s390/math-emu/math.c b/arch/s390/math-emu/math.c index 58bff541fde..a6ba0d72433 100644 --- a/arch/s390/math-emu/math.c +++ b/arch/s390/math-emu/math.c @@ -19,6 +19,8 @@ #include <math-emu/double.h> #include <math-emu/quad.h> +#define FPC_VALID_MASK 0xF8F8FF03 + /* * I miss a macro to round a floating point number to the * nearest integer in the same floating point format. diff --git a/arch/s390/mm/cmm.c b/arch/s390/mm/cmm.c index 9d84a1feefe..79ddd580d60 100644 --- a/arch/s390/mm/cmm.c +++ b/arch/s390/mm/cmm.c @@ -253,12 +253,12 @@ static int cmm_skip_blanks(char *cp, char **endp) static struct ctl_table cmm_table[]; -static int cmm_pages_handler(ctl_table *ctl, int write, void __user *buffer, - size_t *lenp, loff_t *ppos) +static int cmm_pages_handler(struct ctl_table *ctl, int write, + void __user *buffer, size_t *lenp, loff_t *ppos) { char buf[16], *p; + unsigned int len; long nr; - int len; if (!*lenp || (*ppos && !write)) { *lenp = 0; @@ -293,12 +293,12 @@ static int cmm_pages_handler(ctl_table *ctl, int write, void __user *buffer, return 0; } -static int cmm_timeout_handler(ctl_table *ctl, int write, void __user *buffer, - size_t *lenp, loff_t *ppos) +static int cmm_timeout_handler(struct ctl_table *ctl, int write, + void __user *buffer, size_t *lenp, loff_t *ppos) { char buf[64], *p; long nr, seconds; - int len; + unsigned int len; if (!*lenp || (*ppos && !write)) { *lenp = 0; diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c index fc6679210d8..d95265b2719 100644 --- a/arch/s390/mm/fault.c +++ b/arch/s390/mm/fault.c @@ -115,13 +115,8 @@ static inline int user_space_fault(unsigned long trans_exc_code) if (trans_exc_code == 2) /* Access via secondary space, set_fs setting decides */ return current->thread.mm_segment.ar4; - if (s390_user_mode == HOME_SPACE_MODE) - /* User space if the access has been done via home space. */ - return trans_exc_code == 3; /* - * If the user space is not the home space the kernel runs in home - * space. Access via secondary space has already been covered, - * access via primary space or access register is from user space + * Access via primary space or access register is from user space * and access via home space is from the kernel. */ return trans_exc_code != 3; @@ -428,50 +423,13 @@ void __kprobes do_dat_exception(struct pt_regs *regs) do_fault_error(regs, fault); } -#ifdef CONFIG_64BIT -void __kprobes do_asce_exception(struct pt_regs *regs) -{ - struct mm_struct *mm = current->mm; - struct vm_area_struct *vma; - unsigned long trans_exc_code; - - /* - * The instruction that caused the program check has - * been nullified. Don't signal single step via SIGTRAP. - */ - clear_tsk_thread_flag(current, TIF_PER_TRAP); - - trans_exc_code = regs->int_parm_long; - if (unlikely(!user_space_fault(trans_exc_code) || in_atomic() || !mm)) - goto no_context; - - down_read(&mm->mmap_sem); - vma = find_vma(mm, trans_exc_code & __FAIL_ADDR_MASK); - up_read(&mm->mmap_sem); - - if (vma) { - update_mm(mm, current); - return; - } - - /* User mode accesses just cause a SIGSEGV */ - if (user_mode(regs)) { - do_sigsegv(regs, SEGV_MAPERR); - return; - } - -no_context: - do_no_context(regs); -} -#endif - int __handle_fault(unsigned long uaddr, unsigned long pgm_int_code, int write) { struct pt_regs regs; int access, fault; /* Emulate a uaccess fault from kernel mode. */ - regs.psw.mask = psw_kernel_bits | PSW_MASK_DAT | PSW_MASK_MCHECK; + regs.psw.mask = PSW_KERNEL_BITS | PSW_MASK_DAT | PSW_MASK_MCHECK; if (!irqs_disabled()) regs.psw.mask |= PSW_MASK_IO | PSW_MASK_EXT; regs.psw.addr = (unsigned long) __builtin_return_address(0); diff --git a/arch/s390/mm/gup.c b/arch/s390/mm/gup.c index 5d758db27bd..639fce46400 100644 --- a/arch/s390/mm/gup.c +++ b/arch/s390/mm/gup.c @@ -180,9 +180,15 @@ int __get_user_pages_fast(unsigned long start, int nr_pages, int write, addr = start; len = (unsigned long) nr_pages << PAGE_SHIFT; end = start + len; - if ((end < start) || (end > TASK_SIZE)) + if ((end <= start) || (end > TASK_SIZE)) return 0; - + /* + * local_irq_save() doesn't prevent pagetable teardown, but does + * prevent the pagetables from being freed on s390. + * + * So long as we atomically load page table pointers versus teardown, + * we can follow the address down to the the page and take a ref on it. + */ local_irq_save(flags); pgdp = pgd_offset(mm, addr); do { @@ -219,63 +225,22 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write, struct page **pages) { struct mm_struct *mm = current->mm; - unsigned long addr, len, end; - unsigned long next; - pgd_t *pgdp, pgd; - int nr = 0; + int nr, ret; start &= PAGE_MASK; - addr = start; - len = (unsigned long) nr_pages << PAGE_SHIFT; - end = start + len; - if ((end < start) || (end > TASK_SIZE)) - goto slow_irqon; - - /* - * local_irq_disable() doesn't prevent pagetable teardown, but does - * prevent the pagetables from being freed on s390. - * - * So long as we atomically load page table pointers versus teardown, - * we can follow the address down to the the page and take a ref on it. - */ - local_irq_disable(); - pgdp = pgd_offset(mm, addr); - do { - pgd = *pgdp; - barrier(); - next = pgd_addr_end(addr, end); - if (pgd_none(pgd)) - goto slow; - if (!gup_pud_range(pgdp, pgd, addr, next, write, pages, &nr)) - goto slow; - } while (pgdp++, addr = next, addr != end); - local_irq_enable(); - - VM_BUG_ON(nr != (end - start) >> PAGE_SHIFT); - return nr; - - { - int ret; -slow: - local_irq_enable(); -slow_irqon: - /* Try to get the remaining pages with get_user_pages */ - start += nr << PAGE_SHIFT; - pages += nr; - - down_read(&mm->mmap_sem); - ret = get_user_pages(current, mm, start, - (end - start) >> PAGE_SHIFT, write, 0, pages, NULL); - up_read(&mm->mmap_sem); - - /* Have to be a bit careful with return values */ - if (nr > 0) { - if (ret < 0) - ret = nr; - else - ret += nr; - } - - return ret; - } + nr = __get_user_pages_fast(start, nr_pages, write, pages); + if (nr == nr_pages) + return nr; + + /* Try to get the remaining pages with get_user_pages */ + start += nr << PAGE_SHIFT; + pages += nr; + down_read(&mm->mmap_sem); + ret = get_user_pages(current, mm, start, + nr_pages - nr, write, 0, pages, NULL); + up_read(&mm->mmap_sem); + /* Have to be a bit careful with return values */ + if (nr > 0) + ret = (ret < 0) ? nr : ret + nr; + return ret; } diff --git a/arch/s390/mm/mmap.c b/arch/s390/mm/mmap.c index 40023290ee5..6bcb045d2bd 100644 --- a/arch/s390/mm/mmap.c +++ b/arch/s390/mm/mmap.c @@ -101,18 +101,12 @@ void arch_pick_mmap_layout(struct mm_struct *mm) int s390_mmap_check(unsigned long addr, unsigned long len, unsigned long flags) { - int rc; - if (is_compat_task() || (TASK_SIZE >= (1UL << 53))) return 0; if (!(flags & MAP_FIXED)) addr = 0; - if ((addr + len) >= TASK_SIZE) { - rc = crst_table_upgrade(current->mm, 1UL << 53); - if (rc) - return rc; - update_mm(current->mm, current); - } + if ((addr + len) >= TASK_SIZE) + return crst_table_upgrade(current->mm, 1UL << 53); return 0; } @@ -132,7 +126,6 @@ s390_get_unmapped_area(struct file *filp, unsigned long addr, rc = crst_table_upgrade(mm, 1UL << 53); if (rc) return (unsigned long) rc; - update_mm(mm, current); area = arch_get_unmapped_area(filp, addr, len, pgoff, flags); } return area; @@ -155,7 +148,6 @@ s390_get_unmapped_area_topdown(struct file *filp, const unsigned long addr, rc = crst_table_upgrade(mm, 1UL << 53); if (rc) return (unsigned long) rc; - update_mm(mm, current); area = arch_get_unmapped_area_topdown(filp, addr, len, pgoff, flags); } diff --git a/arch/s390/mm/pageattr.c b/arch/s390/mm/pageattr.c index 990397420e6..8400f494623 100644 --- a/arch/s390/mm/pageattr.c +++ b/arch/s390/mm/pageattr.c @@ -9,6 +9,7 @@ #include <asm/pgtable.h> #include <asm/page.h> +#if PAGE_DEFAULT_KEY static inline unsigned long sske_frame(unsigned long addr, unsigned char skey) { asm volatile(".insn rrf,0xb22b0000,%[skey],%[addr],9,0" @@ -16,7 +17,7 @@ static inline unsigned long sske_frame(unsigned long addr, unsigned char skey) return addr; } -void storage_key_init_range(unsigned long start, unsigned long end) +void __storage_key_init_range(unsigned long start, unsigned long end) { unsigned long boundary, size; @@ -36,6 +37,7 @@ void storage_key_init_range(unsigned long start, unsigned long end) start += PAGE_SIZE; } } +#endif static pte_t *walk_page_table(unsigned long addr) { diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c index de8cbc30dcd..0a2e5e08674 100644 --- a/arch/s390/mm/pgtable.c +++ b/arch/s390/mm/pgtable.c @@ -48,12 +48,23 @@ void crst_table_free(struct mm_struct *mm, unsigned long *table) } #ifdef CONFIG_64BIT +static void __crst_table_upgrade(void *arg) +{ + struct mm_struct *mm = arg; + + if (current->active_mm == mm) + update_mm(mm, current); + __tlb_flush_local(); +} + int crst_table_upgrade(struct mm_struct *mm, unsigned long limit) { unsigned long *table, *pgd; unsigned long entry; + int flush; BUG_ON(limit > (1UL << 53)); + flush = 0; repeat: table = crst_table_alloc(mm); if (!table) @@ -79,12 +90,15 @@ repeat: mm->pgd = (pgd_t *) table; mm->task_size = mm->context.asce_limit; table = NULL; + flush = 1; } spin_unlock_bh(&mm->page_table_lock); if (table) crst_table_free(mm, table); if (mm->context.asce_limit < limit) goto repeat; + if (flush) + on_each_cpu(__crst_table_upgrade, mm, 0); return 0; } @@ -92,6 +106,8 @@ void crst_table_downgrade(struct mm_struct *mm, unsigned long limit) { pgd_t *pgd; + if (current->active_mm == mm) + __tlb_flush_mm(mm); while (mm->context.asce_limit > limit) { pgd = mm->pgd; switch (pgd_val(*pgd) & _REGION_ENTRY_TYPE_MASK) { @@ -114,6 +130,8 @@ void crst_table_downgrade(struct mm_struct *mm, unsigned long limit) mm->task_size = mm->context.asce_limit; crst_table_free(mm, (unsigned long *) pgd); } + if (current->active_mm == mm) + update_mm(mm, current); } #endif @@ -1087,10 +1105,9 @@ again: continue; /* Allocate new page table with pgstes */ new = page_table_alloc_pgste(mm, addr); - if (!new) { - mm->context.has_pgste = 0; - continue; - } + if (!new) + return -ENOMEM; + spin_lock(&mm->page_table_lock); if (likely((unsigned long *) pmd_deref(*pmd) == table)) { /* Nuke pmd entry pointing to the "short" page table */ @@ -1128,13 +1145,15 @@ static unsigned long page_table_realloc_pud(struct mmu_gather *tlb, if (pud_none_or_clear_bad(pud)) continue; next = page_table_realloc_pmd(tlb, mm, pud, addr, next); + if (unlikely(IS_ERR_VALUE(next))) + return next; } while (pud++, addr = next, addr != end); return addr; } -static void page_table_realloc(struct mmu_gather *tlb, struct mm_struct *mm, - unsigned long addr, unsigned long end) +static unsigned long page_table_realloc(struct mmu_gather *tlb, struct mm_struct *mm, + unsigned long addr, unsigned long end) { unsigned long next; pgd_t *pgd; @@ -1145,7 +1164,11 @@ static void page_table_realloc(struct mmu_gather *tlb, struct mm_struct *mm, if (pgd_none_or_clear_bad(pgd)) continue; next = page_table_realloc_pud(tlb, mm, pgd, addr, next); + if (unlikely(IS_ERR_VALUE(next))) + return next; } while (pgd++, addr = next, addr != end); + + return 0; } /* @@ -1157,10 +1180,6 @@ int s390_enable_sie(void) struct mm_struct *mm = tsk->mm; struct mmu_gather tlb; - /* Do we have switched amode? If no, we cannot do sie */ - if (s390_user_mode == HOME_SPACE_MODE) - return -EINVAL; - /* Do we have pgstes? if yes, we are done */ if (mm_has_pgste(tsk->mm)) return 0; @@ -1169,9 +1188,9 @@ int s390_enable_sie(void) /* split thp mappings and disable thp for future mappings */ thp_split_mm(mm); /* Reallocate the page tables with pgstes */ - mm->context.has_pgste = 1; tlb_gather_mmu(&tlb, mm, 0, TASK_SIZE); - page_table_realloc(&tlb, mm, 0, TASK_SIZE); + if (!page_table_realloc(&tlb, mm, 0, TASK_SIZE)) + mm->context.has_pgste = 1; tlb_finish_mmu(&tlb, 0, TASK_SIZE); up_write(&mm->mmap_sem); return mm->context.has_pgste ? 0 : -ENOMEM; diff --git a/arch/s390/net/bpf_jit_comp.c b/arch/s390/net/bpf_jit_comp.c index 70923928586..16871da3737 100644 --- a/arch/s390/net/bpf_jit_comp.c +++ b/arch/s390/net/bpf_jit_comp.c @@ -12,8 +12,8 @@ #include <linux/random.h> #include <linux/init.h> #include <asm/cacheflush.h> -#include <asm/processor.h> #include <asm/facility.h> +#include <asm/dis.h> /* * Conventions: @@ -156,8 +156,8 @@ static void bpf_jit_prologue(struct bpf_jit *jit) EMIT6(0xeb8ff058, 0x0024); /* lgr %r14,%r15 */ EMIT4(0xb90400ef); - /* ahi %r15,<offset> */ - EMIT4_IMM(0xa7fa0000, (jit->seen & SEEN_MEM) ? -112 : -80); + /* aghi %r15,<offset> */ + EMIT4_IMM(0xa7fb0000, (jit->seen & SEEN_MEM) ? -112 : -80); /* stg %r14,152(%r15) */ EMIT6(0xe3e0f098, 0x0024); } else if ((jit->seen & SEEN_XREG) && (jit->seen & SEEN_LITERAL)) @@ -881,7 +881,9 @@ void bpf_jit_free(struct sk_filter *fp) struct bpf_binary_header *header = (void *)addr; if (fp->bpf_func == sk_run_filter) - return; + goto free_filter; set_memory_rw(addr, header->pages); module_free(NULL, header); +free_filter: + kfree(fp); } diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c index f17a8343e36..0c9a17780e4 100644 --- a/arch/s390/pci/pci.c +++ b/arch/s390/pci/pci.c @@ -120,26 +120,17 @@ EXPORT_SYMBOL_GPL(pci_proc_domain); static int zpci_set_airq(struct zpci_dev *zdev) { u64 req = ZPCI_CREATE_REQ(zdev->fh, 0, ZPCI_MOD_FC_REG_INT); - struct zpci_fib *fib; - int rc; - - fib = (void *) get_zeroed_page(GFP_KERNEL); - if (!fib) - return -ENOMEM; + struct zpci_fib fib = {0}; - fib->isc = PCI_ISC; - fib->sum = 1; /* enable summary notifications */ - fib->noi = airq_iv_end(zdev->aibv); - fib->aibv = (unsigned long) zdev->aibv->vector; - fib->aibvo = 0; /* each zdev has its own interrupt vector */ - fib->aisb = (unsigned long) zpci_aisb_iv->vector + (zdev->aisb/64)*8; - fib->aisbo = zdev->aisb & 63; + fib.isc = PCI_ISC; + fib.sum = 1; /* enable summary notifications */ + fib.noi = airq_iv_end(zdev->aibv); + fib.aibv = (unsigned long) zdev->aibv->vector; + fib.aibvo = 0; /* each zdev has its own interrupt vector */ + fib.aisb = (unsigned long) zpci_aisb_iv->vector + (zdev->aisb/64)*8; + fib.aisbo = zdev->aisb & 63; - rc = zpci_mod_fc(req, fib); - pr_debug("%s mpcifc returned noi: %d\n", __func__, fib->noi); - - free_page((unsigned long) fib); - return rc; + return zpci_mod_fc(req, &fib); } struct mod_pci_args { @@ -152,22 +143,14 @@ struct mod_pci_args { static int mod_pci(struct zpci_dev *zdev, int fn, u8 dmaas, struct mod_pci_args *args) { u64 req = ZPCI_CREATE_REQ(zdev->fh, dmaas, fn); - struct zpci_fib *fib; - int rc; - - /* The FIB must be available even if it's not used */ - fib = (void *) get_zeroed_page(GFP_KERNEL); - if (!fib) - return -ENOMEM; + struct zpci_fib fib = {0}; - fib->pba = args->base; - fib->pal = args->limit; - fib->iota = args->iota; - fib->fmb_addr = args->fmb_addr; + fib.pba = args->base; + fib.pal = args->limit; + fib.iota = args->iota; + fib.fmb_addr = args->fmb_addr; - rc = zpci_mod_fc(req, fib); - free_page((unsigned long) fib); - return rc; + return zpci_mod_fc(req, &fib); } /* Modify PCI: Register I/O address translation parameters */ @@ -424,7 +407,6 @@ int arch_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type) struct msi_msg msg; int rc; - pr_debug("%s: requesting %d MSI-X interrupts...", __func__, nvec); if (type != PCI_CAP_ID_MSIX && type != PCI_CAP_ID_MSI) return -EINVAL; msi_vecs = min(nvec, ZPCI_MSI_VEC_MAX); @@ -489,7 +471,6 @@ out_msi: out_si: airq_iv_free_bit(zpci_aisb_iv, aisb); out: - dev_err(&pdev->dev, "register MSI failed with: %d\n", rc); return rc; } @@ -499,14 +480,10 @@ void arch_teardown_msi_irqs(struct pci_dev *pdev) struct msi_desc *msi; int rc; - pr_info("%s: on pdev: %p\n", __func__, pdev); - /* Disable adapter interrupts */ rc = zpci_clear_airq(zdev); - if (rc) { - dev_err(&pdev->dev, "deregister MSI failed with: %d\n", rc); + if (rc) return; - } /* Release MSI interrupts */ list_for_each_entry(msi, &pdev->msi_list, list) { @@ -625,8 +602,11 @@ static struct resource *zpci_alloc_bus_resource(unsigned long start, unsigned lo r->name = name; rc = request_resource(&iomem_resource, r); - if (rc) - pr_debug("request resource %pR failed\n", r); + if (rc) { + kfree(r->name); + kfree(r); + return ERR_PTR(-ENOMEM); + } return r; } @@ -708,6 +688,47 @@ void pcibios_disable_device(struct pci_dev *pdev) zdev->pdev = NULL; } +#ifdef CONFIG_HIBERNATE_CALLBACKS +static int zpci_restore(struct device *dev) +{ + struct zpci_dev *zdev = get_zdev(to_pci_dev(dev)); + int ret = 0; + + if (zdev->state != ZPCI_FN_STATE_ONLINE) + goto out; + + ret = clp_enable_fh(zdev, ZPCI_NR_DMA_SPACES); + if (ret) + goto out; + + zpci_map_resources(zdev); + zpci_register_ioat(zdev, 0, zdev->start_dma + PAGE_OFFSET, + zdev->start_dma + zdev->iommu_size - 1, + (u64) zdev->dma_table); + +out: + return ret; +} + +static int zpci_freeze(struct device *dev) +{ + struct zpci_dev *zdev = get_zdev(to_pci_dev(dev)); + + if (zdev->state != ZPCI_FN_STATE_ONLINE) + return 0; + + zpci_unregister_ioat(zdev, 0); + return clp_disable_fh(zdev); +} + +struct dev_pm_ops pcibios_pm_ops = { + .thaw_noirq = zpci_restore, + .freeze_noirq = zpci_freeze, + .restore_noirq = zpci_restore, + .poweroff_noirq = zpci_freeze, +}; +#endif /* CONFIG_HIBERNATE_CALLBACKS */ + static int zpci_scan_bus(struct zpci_dev *zdev) { struct resource *res; @@ -781,7 +802,6 @@ int zpci_enable_device(struct zpci_dev *zdev) rc = clp_enable_fh(zdev, ZPCI_NR_DMA_SPACES); if (rc) goto out; - pr_info("Enabled fh: 0x%x fid: 0x%x\n", zdev->fh, zdev->fid); rc = zpci_dma_init_device(zdev); if (rc) @@ -901,10 +921,6 @@ static int __init pci_base_init(void) || !test_facility(71) || !test_facility(72)) return 0; - pr_info("Probing PCI hardware: PCI:%d SID:%d AEN:%d\n", - test_facility(69), test_facility(70), - test_facility(71)); - rc = zpci_debug_init(); if (rc) goto out; diff --git a/arch/s390/pci/pci_clp.c b/arch/s390/pci/pci_clp.c index 475563c3d1e..84147984224 100644 --- a/arch/s390/pci/pci_clp.c +++ b/arch/s390/pci/pci_clp.c @@ -16,6 +16,16 @@ #include <asm/pci_debug.h> #include <asm/pci_clp.h> +static inline void zpci_err_clp(unsigned int rsp, int rc) +{ + struct { + unsigned int rsp; + int rc; + } __packed data = {rsp, rc}; + + zpci_err_hex(&data, sizeof(data)); +} + /* * Call Logical Processor * Retry logic is handled by the caller. @@ -54,7 +64,6 @@ static void clp_store_query_pci_fngrp(struct zpci_dev *zdev, zdev->msi_addr = response->msia; zdev->fmb_update = response->mui; - pr_debug("Supported number of MSI vectors: %u\n", response->noi); switch (response->version) { case 1: zdev->max_bus_speed = PCIE_SPEED_5_0GT; @@ -84,8 +93,8 @@ static int clp_query_pci_fngrp(struct zpci_dev *zdev, u8 pfgid) if (!rc && rrb->response.hdr.rsp == CLP_RC_OK) clp_store_query_pci_fngrp(zdev, &rrb->response); else { - pr_err("Query PCI FNGRP failed with response: %x cc: %d\n", - rrb->response.hdr.rsp, rc); + zpci_err("Q PCI FGRP:\n"); + zpci_err_clp(rrb->response.hdr.rsp, rc); rc = -EIO; } clp_free_block(rrb); @@ -131,8 +140,8 @@ static int clp_query_pci_fn(struct zpci_dev *zdev, u32 fh) if (rrb->response.pfgid) rc = clp_query_pci_fngrp(zdev, rrb->response.pfgid); } else { - pr_err("Query PCI failed with response: %x cc: %d\n", - rrb->response.hdr.rsp, rc); + zpci_err("Q PCI FN:\n"); + zpci_err_clp(rrb->response.hdr.rsp, rc); rc = -EIO; } out: @@ -206,8 +215,8 @@ static int clp_set_pci_fn(u32 *fh, u8 nr_dma_as, u8 command) if (!rc && rrb->response.hdr.rsp == CLP_RC_OK) *fh = rrb->response.fh; else { - zpci_dbg(0, "SPF fh:%x, cc:%d, resp:%x\n", *fh, rc, - rrb->response.hdr.rsp); + zpci_err("Set PCI FN:\n"); + zpci_err_clp(rrb->response.hdr.rsp, rc); rc = -EIO; } clp_free_block(rrb); @@ -262,8 +271,8 @@ static int clp_list_pci(struct clp_req_rsp_list_pci *rrb, /* Get PCI function handle list */ rc = clp_instr(rrb); if (rc || rrb->response.hdr.rsp != CLP_RC_OK) { - pr_err("List PCI failed with response: 0x%x cc: %d\n", - rrb->response.hdr.rsp, rc); + zpci_err("List PCI FN:\n"); + zpci_err_clp(rrb->response.hdr.rsp, rc); rc = -EIO; goto out; } @@ -273,17 +282,11 @@ static int clp_list_pci(struct clp_req_rsp_list_pci *rrb, entries = (rrb->response.hdr.len - LIST_PCI_HDR_LEN) / rrb->response.entry_size; - pr_info("Detected number of PCI functions: %u\n", entries); - /* Store the returned resume token as input for the next call */ resume_token = rrb->response.resume_token; - for (i = 0; i < entries; i++) cb(&rrb->response.fh_list[i]); } while (resume_token); - - pr_debug("Maximum number of supported PCI functions: %u\n", - rrb->response.max_fn); out: return rc; } diff --git a/arch/s390/pci/pci_dma.c b/arch/s390/pci/pci_dma.c index 7e5573acb06..9b83d080902 100644 --- a/arch/s390/pci/pci_dma.c +++ b/arch/s390/pci/pci_dma.c @@ -145,10 +145,8 @@ static int dma_update_trans(struct zpci_dev *zdev, unsigned long pa, return -EINVAL; spin_lock_irqsave(&zdev->dma_table_lock, irq_flags); - if (!zdev->dma_table) { - dev_err(&zdev->pdev->dev, "Missing DMA table\n"); + if (!zdev->dma_table) goto no_refresh; - } for (i = 0; i < nr_pages; i++) { dma_update_cpu_trans(zdev, page_addr, dma_addr, flags); @@ -280,11 +278,8 @@ static dma_addr_t s390_dma_map_pages(struct device *dev, struct page *page, size = nr_pages * PAGE_SIZE; dma_addr = zdev->start_dma + iommu_page_index * PAGE_SIZE; - if (dma_addr + size > zdev->end_dma) { - dev_err(dev, "(dma_addr: 0x%16.16LX + size: 0x%16.16lx) > end_dma: 0x%16.16Lx\n", - dma_addr, size, zdev->end_dma); + if (dma_addr + size > zdev->end_dma) goto out_free; - } if (direction == DMA_NONE || direction == DMA_TO_DEVICE) flags |= ZPCI_TABLE_PROTECTED; @@ -297,7 +292,8 @@ static dma_addr_t s390_dma_map_pages(struct device *dev, struct page *page, out_free: dma_free_iommu(zdev, iommu_page_index, nr_pages); out_err: - dev_err(dev, "Failed to map addr: %lx\n", pa); + zpci_err("map error:\n"); + zpci_err_hex(&pa, sizeof(pa)); return DMA_ERROR_CODE; } @@ -312,8 +308,10 @@ static void s390_dma_unmap_pages(struct device *dev, dma_addr_t dma_addr, npages = iommu_num_pages(dma_addr, size, PAGE_SIZE); dma_addr = dma_addr & PAGE_MASK; if (dma_update_trans(zdev, 0, dma_addr, npages * PAGE_SIZE, - ZPCI_TABLE_PROTECTED | ZPCI_PTE_INVALID)) - dev_err(dev, "Failed to unmap addr: %Lx\n", dma_addr); + ZPCI_TABLE_PROTECTED | ZPCI_PTE_INVALID)) { + zpci_err("unmap error:\n"); + zpci_err_hex(&dma_addr, sizeof(dma_addr)); + } atomic64_add(npages, (atomic64_t *) &zdev->fmb->unmapped_pages); iommu_page_index = (dma_addr - zdev->start_dma) >> PAGE_SHIFT; diff --git a/arch/s390/pci/pci_event.c b/arch/s390/pci/pci_event.c index 0aecaf95484..278e671ec9a 100644 --- a/arch/s390/pci/pci_event.c +++ b/arch/s390/pci/pci_event.c @@ -10,6 +10,7 @@ #include <linux/kernel.h> #include <linux/pci.h> +#include <asm/pci_debug.h> /* Content Code Description for PCI Function Error */ struct zpci_ccdf_err { @@ -41,25 +42,15 @@ struct zpci_ccdf_avail { u16 pec; /* PCI event code */ } __packed; -static void zpci_event_log_err(struct zpci_ccdf_err *ccdf) -{ - struct zpci_dev *zdev = get_zdev_by_fid(ccdf->fid); - - zpci_err("SEI error CCD:\n"); - zpci_err_hex(ccdf, sizeof(*ccdf)); - dev_err(&zdev->pdev->dev, "event code: 0x%x\n", ccdf->pec); -} - static void zpci_event_log_avail(struct zpci_ccdf_avail *ccdf) { struct zpci_dev *zdev = get_zdev_by_fid(ccdf->fid); + struct pci_dev *pdev = zdev ? zdev->pdev : NULL; - pr_err("%s%s: availability event: fh: 0x%x fid: 0x%x event code: 0x%x reason:", - (zdev) ? dev_driver_string(&zdev->pdev->dev) : "?", - (zdev) ? dev_name(&zdev->pdev->dev) : "?", - ccdf->fh, ccdf->fid, ccdf->pec); - print_hex_dump(KERN_CONT, "ccdf", DUMP_PREFIX_OFFSET, - 16, 1, ccdf, sizeof(*ccdf), false); + pr_info("%s: Event 0x%x reconfigured PCI function 0x%x\n", + pdev ? pci_name(pdev) : "n/a", ccdf->pec, ccdf->fid); + zpci_err("avail CCDF:\n"); + zpci_err_hex(ccdf, sizeof(*ccdf)); switch (ccdf->pec) { case 0x0301: @@ -79,14 +70,16 @@ static void zpci_event_log_avail(struct zpci_ccdf_avail *ccdf) void zpci_event_error(void *data) { struct zpci_ccdf_err *ccdf = data; - struct zpci_dev *zdev; + struct zpci_dev *zdev = get_zdev_by_fid(ccdf->fid); + + zpci_err("error CCDF:\n"); + zpci_err_hex(ccdf, sizeof(*ccdf)); - zpci_event_log_err(ccdf); - zdev = get_zdev_by_fid(ccdf->fid); - if (!zdev) { - pr_err("Error event for unknown fid: %x", ccdf->fid); + if (!zdev) return; - } + + pr_err("%s: Event 0x%x reports an error for PCI function 0x%x\n", + pci_name(zdev->pdev), ccdf->pec, ccdf->fid); } void zpci_event_availability(void *data) diff --git a/arch/sparc/net/bpf_jit_comp.c b/arch/sparc/net/bpf_jit_comp.c index 9c7be59e6f5..218b6b23c37 100644 --- a/arch/sparc/net/bpf_jit_comp.c +++ b/arch/sparc/net/bpf_jit_comp.c @@ -808,4 +808,5 @@ void bpf_jit_free(struct sk_filter *fp) { if (fp->bpf_func != sk_run_filter) module_free(NULL, fp->bpf_func); + kfree(fp); } diff --git a/arch/um/kernel/exitcode.c b/arch/um/kernel/exitcode.c index 829df49dee9..41ebbfebb33 100644 --- a/arch/um/kernel/exitcode.c +++ b/arch/um/kernel/exitcode.c @@ -40,9 +40,11 @@ static ssize_t exitcode_proc_write(struct file *file, const char __user *buffer, size_t count, loff_t *pos) { char *end, buf[sizeof("nnnnn\0")]; + size_t size; int tmp; - if (copy_from_user(buf, buffer, count)) + size = min(count, sizeof(buf)); + if (copy_from_user(buf, buffer, size)) return -EFAULT; tmp = simple_strtol(buf, &end, 0); diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 145d703227b..f67e839f06c 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -1033,6 +1033,7 @@ config X86_REBOOTFIXUPS config MICROCODE tristate "CPU microcode loading support" + depends on CPU_SUP_AMD || CPU_SUP_INTEL select FW_LOADER ---help--- diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h index 0da5200ee79..b3e18f80030 100644 --- a/arch/x86/include/asm/percpu.h +++ b/arch/x86/include/asm/percpu.h @@ -128,7 +128,8 @@ do { \ do { \ typedef typeof(var) pao_T__; \ const int pao_ID__ = (__builtin_constant_p(val) && \ - ((val) == 1 || (val) == -1)) ? (val) : 0; \ + ((val) == 1 || (val) == -1)) ? \ + (int)(val) : 0; \ if (0) { \ pao_T__ pao_tmp__; \ pao_tmp__ = (val); \ diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c index 1191ac1c9d2..a419814cea5 100644 --- a/arch/x86/kernel/apic/x2apic_uv_x.c +++ b/arch/x86/kernel/apic/x2apic_uv_x.c @@ -113,7 +113,7 @@ static int __init early_get_pnodeid(void) break; case UV3_HUB_PART_NUMBER: case UV3_HUB_PART_NUMBER_X: - uv_min_hub_revision_id += UV3_HUB_REVISION_BASE - 1; + uv_min_hub_revision_id += UV3_HUB_REVISION_BASE; break; } diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c index 9d8449158cf..8a87a322412 100644 --- a/arch/x86/kernel/cpu/perf_event.c +++ b/arch/x86/kernel/cpu/perf_event.c @@ -1276,16 +1276,16 @@ void perf_events_lapic_init(void) static int __kprobes perf_event_nmi_handler(unsigned int cmd, struct pt_regs *regs) { - int ret; u64 start_clock; u64 finish_clock; + int ret; if (!atomic_read(&active_events)) return NMI_DONE; - start_clock = local_clock(); + start_clock = sched_clock(); ret = x86_pmu.handle_irq(regs); - finish_clock = local_clock(); + finish_clock = sched_clock(); perf_sample_event_took(finish_clock - start_clock); diff --git a/arch/x86/kernel/kvm.c b/arch/x86/kernel/kvm.c index a0e2a8a80c9..b2046e4d0b5 100644 --- a/arch/x86/kernel/kvm.c +++ b/arch/x86/kernel/kvm.c @@ -609,7 +609,7 @@ static struct dentry *d_kvm_debug; struct dentry *kvm_init_debugfs(void) { - d_kvm_debug = debugfs_create_dir("kvm", NULL); + d_kvm_debug = debugfs_create_dir("kvm-guest", NULL); if (!d_kvm_debug) printk(KERN_WARNING "Could not create 'kvm' debugfs directory\n"); diff --git a/arch/x86/kernel/nmi.c b/arch/x86/kernel/nmi.c index ba77ebc2c35..6fcb49ce50a 100644 --- a/arch/x86/kernel/nmi.c +++ b/arch/x86/kernel/nmi.c @@ -113,10 +113,10 @@ static int __kprobes nmi_handle(unsigned int type, struct pt_regs *regs, bool b2 u64 before, delta, whole_msecs; int remainder_ns, decimal_msecs, thishandled; - before = local_clock(); + before = sched_clock(); thishandled = a->handler(type, regs); handled += thishandled; - delta = local_clock() - before; + delta = sched_clock() - before; trace_nmi_handler(a->handler, (int)delta, thishandled); if (delta < nmi_longest_ns) diff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c index 79c216aa0e2..516593e1ce3 100644 --- a/arch/x86/net/bpf_jit_comp.c +++ b/arch/x86/net/bpf_jit_comp.c @@ -772,13 +772,21 @@ out: return; } +static void bpf_jit_free_deferred(struct work_struct *work) +{ + struct sk_filter *fp = container_of(work, struct sk_filter, work); + unsigned long addr = (unsigned long)fp->bpf_func & PAGE_MASK; + struct bpf_binary_header *header = (void *)addr; + + set_memory_rw(addr, header->pages); + module_free(NULL, header); + kfree(fp); +} + void bpf_jit_free(struct sk_filter *fp) { if (fp->bpf_func != sk_run_filter) { - unsigned long addr = (unsigned long)fp->bpf_func & PAGE_MASK; - struct bpf_binary_header *header = (void *)addr; - - set_memory_rw(addr, header->pages); - module_free(NULL, header); + INIT_WORK(&fp->work, bpf_jit_free_deferred); + schedule_work(&fp->work); } } diff --git a/arch/xtensa/kernel/entry.S b/arch/xtensa/kernel/entry.S index de1dfa18d0a..21dbe6bdb8e 100644 --- a/arch/xtensa/kernel/entry.S +++ b/arch/xtensa/kernel/entry.S @@ -1122,7 +1122,7 @@ ENDPROC(fast_syscall_spill_registers) * a3: exctable, original value in excsave1 */ -fast_syscall_spill_registers_fixup: +ENTRY(fast_syscall_spill_registers_fixup) rsr a2, windowbase # get current windowbase (a2 is saved) xsr a0, depc # restore depc and a0 @@ -1134,22 +1134,26 @@ fast_syscall_spill_registers_fixup: */ xsr a3, excsave1 # get spill-mask - slli a2, a3, 1 # shift left by one + slli a3, a3, 1 # shift left by one - slli a3, a2, 32-WSBITS - src a2, a2, a3 # a1 = xxwww1yyxxxwww1yy...... + slli a2, a3, 32-WSBITS + src a2, a3, a2 # a2 = xxwww1yyxxxwww1yy...... wsr a2, windowstart # set corrected windowstart - rsr a3, excsave1 - l32i a2, a3, EXC_TABLE_DOUBLE_SAVE # restore a2 - l32i a3, a3, EXC_TABLE_PARAM # original WB (in user task) + srli a3, a3, 1 + rsr a2, excsave1 + l32i a2, a2, EXC_TABLE_DOUBLE_SAVE # restore a2 + xsr a2, excsave1 + s32i a3, a2, EXC_TABLE_DOUBLE_SAVE # save a3 + l32i a3, a2, EXC_TABLE_PARAM # original WB (in user task) + xsr a2, excsave1 /* Return to the original (user task) WINDOWBASE. * We leave the following frame behind: * a0, a1, a2 same - * a3: trashed (saved in excsave_1) + * a3: trashed (saved in EXC_TABLE_DOUBLE_SAVE) * depc: depc (we have to return to that address) - * excsave_1: a3 + * excsave_1: exctable */ wsr a3, windowbase @@ -1159,9 +1163,9 @@ fast_syscall_spill_registers_fixup: * a0: return address * a1: used, stack pointer * a2: kernel stack pointer - * a3: available, saved in EXCSAVE_1 + * a3: available * depc: exception address - * excsave: a3 + * excsave: exctable * Note: This frame might be the same as above. */ @@ -1181,9 +1185,12 @@ fast_syscall_spill_registers_fixup: rsr a0, exccause addx4 a0, a0, a3 # find entry in table l32i a0, a0, EXC_TABLE_FAST_USER # load handler + l32i a3, a3, EXC_TABLE_DOUBLE_SAVE jx a0 -fast_syscall_spill_registers_fixup_return: +ENDPROC(fast_syscall_spill_registers_fixup) + +ENTRY(fast_syscall_spill_registers_fixup_return) /* When we return here, all registers have been restored (a2: DEPC) */ @@ -1191,13 +1198,13 @@ fast_syscall_spill_registers_fixup_return: /* Restore fixup handler. */ - xsr a3, excsave1 - movi a2, fast_syscall_spill_registers_fixup - s32i a2, a3, EXC_TABLE_FIXUP - s32i a0, a3, EXC_TABLE_DOUBLE_SAVE - rsr a2, windowbase - s32i a2, a3, EXC_TABLE_PARAM - l32i a2, a3, EXC_TABLE_KSTK + rsr a2, excsave1 + s32i a3, a2, EXC_TABLE_DOUBLE_SAVE + movi a3, fast_syscall_spill_registers_fixup + s32i a3, a2, EXC_TABLE_FIXUP + rsr a3, windowbase + s32i a3, a2, EXC_TABLE_PARAM + l32i a2, a2, EXC_TABLE_KSTK /* Load WB at the time the exception occurred. */ @@ -1206,8 +1213,12 @@ fast_syscall_spill_registers_fixup_return: wsr a3, windowbase rsync + rsr a3, excsave1 + l32i a3, a3, EXC_TABLE_DOUBLE_SAVE + rfde +ENDPROC(fast_syscall_spill_registers_fixup_return) /* * spill all registers. diff --git a/arch/xtensa/kernel/signal.c b/arch/xtensa/kernel/signal.c index 718eca1850b..98b67d5f151 100644 --- a/arch/xtensa/kernel/signal.c +++ b/arch/xtensa/kernel/signal.c @@ -341,7 +341,7 @@ static int setup_frame(int sig, struct k_sigaction *ka, siginfo_t *info, sp = regs->areg[1]; - if ((ka->sa.sa_flags & SA_ONSTACK) != 0 && ! on_sig_stack(sp)) { + if ((ka->sa.sa_flags & SA_ONSTACK) != 0 && sas_ss_flags(sp) == 0) { sp = current->sas_ss_sp + current->sas_ss_size; } diff --git a/arch/xtensa/platforms/iss/network.c b/arch/xtensa/platforms/iss/network.c index 56f88b7afe2..e9e1aad8c27 100644 --- a/arch/xtensa/platforms/iss/network.c +++ b/arch/xtensa/platforms/iss/network.c @@ -737,7 +737,8 @@ static int __init iss_net_setup(char *str) return 1; } - if ((new = alloc_bootmem(sizeof new)) == NULL) { + new = alloc_bootmem(sizeof(*new)); + if (new == NULL) { printk("Alloc_bootmem failed\n"); return 1; } |