diff options
Diffstat (limited to 'arch')
69 files changed, 2513 insertions, 786 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 553b7cf17bf..15b603cb577 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -813,7 +813,7 @@ config ARCH_OMAP select GENERIC_CLOCKEVENTS select ARCH_HAS_HOLES_MEMORYMODEL help - Support for TI's OMAP platform (OMAP1 and OMAP2). + Support for TI's OMAP platform (OMAP1/2/3/4). config PLAT_SPEAR bool "ST SPEAr" diff --git a/arch/arm/configs/n8x0_defconfig b/arch/arm/configs/n8x0_defconfig deleted file mode 100644 index 56aebb69411..00000000000 --- a/arch/arm/configs/n8x0_defconfig +++ /dev/null @@ -1,94 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_LBDAF is not set -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -CONFIG_ARCH_OMAP=y -CONFIG_ARCH_OMAP2=y -CONFIG_OMAP_RESET_CLOCKS=y -# CONFIG_OMAP_MUX is not set -# CONFIG_OMAP_MCBSP is not set -CONFIG_OMAP_MBOX_FWK=y -CONFIG_OMAP_32K_TIMER=y -CONFIG_ARCH_OMAP2420=y -CONFIG_MACH_NOKIA_N8X0=y -CONFIG_AEABI=y -CONFIG_LEDS=y -CONFIG_ZBOOT_ROM_TEXT=0x10C08000 -CONFIG_ZBOOT_ROM_BSS=0x10200000 -CONFIG_CMDLINE="root=/dev/mmcblk0p2 console=ttyS2,115200n8 debug earlyprintk rootwait" -CONFIG_FPE_NWFPE=y -CONFIG_VFP=y -CONFIG_PM=y -CONFIG_PM_RUNTIME=y -CONFIG_NET=y -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_ONENAND=y -CONFIG_MTD_ONENAND_OMAP2=y -CONFIG_MTD_ONENAND_OTP=y -CONFIG_BLK_DEV_RAM=y -# CONFIG_MISC_DEVICES is not set -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -# CONFIG_I2C_COMPAT is not set -# CONFIG_I2C_HELPER_AUTO is not set -CONFIG_I2C_OMAP=y -CONFIG_SPI=y -CONFIG_SPI_OMAP24XX=y -# CONFIG_HWMON is not set -CONFIG_MENELAUS=y -CONFIG_REGULATOR=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_HID_SUPPORT is not set -CONFIG_USB=y -CONFIG_USB_DEBUG=y -CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_SUSPEND=y -# CONFIG_USB_OTG_WHITELIST is not set -CONFIG_USB_MUSB_HDRC=y -CONFIG_USB_MUSB_OTG=y -CONFIG_USB_GADGET_MUSB_HDRC=y -# CONFIG_MUSB_PIO_ONLY is not set -CONFIG_USB_MUSB_DEBUG=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_DEBUG=y -CONFIG_USB_GADGET_DEBUG_FILES=y -CONFIG_USB_ETH=m -CONFIG_USB_ETH_EEM=y -CONFIG_MMC=y -CONFIG_MMC_OMAP=y -CONFIG_EXT3_FS=y -CONFIG_INOTIFY=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_SUMMARY=y -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_JFFS2_LZO=y -CONFIG_PRINTK_TIME=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y -CONFIG_CRC_CCITT=y diff --git a/arch/arm/configs/omap3_defconfig b/arch/arm/configs/omap2plus_defconfig index 5db9a6be205..9ca8df0b5b8 100644 --- a/arch/arm/configs/omap3_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -53,8 +53,12 @@ CONFIG_MACH_SBC3530=y CONFIG_MACH_OMAP_3630SDP=y CONFIG_MACH_OMAP_4430SDP=y CONFIG_ARM_THUMBEE=y +CONFIG_ARM_L1_CACHE_SHIFT=5 +CONFIG_ARM_ERRATA_411920=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y +CONFIG_SMP=y +# CONFIG_LOCAL_TIMERS is not set CONFIG_AEABI=y CONFIG_LEDS=y CONFIG_ZBOOT_ROM_TEXT=0x0 @@ -137,6 +141,8 @@ CONFIG_SMSC_PHY=y CONFIG_NET_ETHERNET=y CONFIG_SMC91X=y CONFIG_SMSC911X=y +CONFIG_KS8851=y +CONFIG_KS8851_MLL=y CONFIG_LIBERTAS=y CONFIG_LIBERTAS_USB=y CONFIG_LIBERTAS_SDIO=y @@ -218,9 +224,9 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_SUSPEND=y # CONFIG_USB_OTG_WHITELIST is not set CONFIG_USB_MON=y -CONFIG_USB_MUSB_HDRC=y -CONFIG_USB_MUSB_OTG=y -CONFIG_USB_GADGET_MUSB_HDRC=y +# CONFIG_USB_MUSB_HDRC is not set +# CONFIG_USB_MUSB_OTG is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set CONFIG_USB_MUSB_DEBUG=y CONFIG_USB_WDM=y CONFIG_USB_STORAGE=y @@ -276,12 +282,11 @@ CONFIG_DEBUG_KERNEL=y CONFIG_SCHEDSTATS=y CONFIG_TIMER_STATS=y CONFIG_PROVE_LOCKING=y -CONFIG_LOCK_STAT=y +# CONFIG_LOCK_STAT is not set CONFIG_DEBUG_SPINLOCK_SLEEP=y # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_DEBUG_LL=y CONFIG_SECURITY=y CONFIG_CRYPTO_MICHAEL_MIC=y # CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/arch/arm/configs/omap_4430sdp_defconfig b/arch/arm/configs/omap_4430sdp_defconfig deleted file mode 100644 index 14c1e18c648..00000000000 --- a/arch/arm/configs/omap_4430sdp_defconfig +++ /dev/null @@ -1,125 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_EMBEDDED=y -# CONFIG_SYSCTL_SYSCALL is not set -# CONFIG_ELF_CORE is not set -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_OMAP=y -CONFIG_ARCH_OMAP4=y -# CONFIG_ARCH_OMAP2PLUS_TYPICAL is not set -# CONFIG_ARCH_OMAP2 is not set -# CONFIG_ARCH_OMAP3 is not set -# CONFIG_OMAP_MUX is not set -CONFIG_OMAP_32K_TIMER=y -CONFIG_OMAP_DM_TIMER=y -CONFIG_MACH_OMAP_4430SDP=y -# CONFIG_ARM_THUMB is not set -CONFIG_PL310_ERRATA_588369=y -CONFIG_SMP=y -CONFIG_NR_CPUS=2 -# CONFIG_LOCAL_TIMERS is not set -CONFIG_PREEMPT=y -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="root=/dev/ram0 rw mem=128M console=ttyS2,115200n8 initrd=0x81600000,20M ramdisk_size=20480" -CONFIG_VFP=y -CONFIG_NEON=y -CONFIG_BINFMT_MISC=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -# CONFIG_IPV6 is not set -# CONFIG_WIRELESS is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_FW_LOADER is not set -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=16384 -# CONFIG_MISC_DEVICES is not set -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_KS8851=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_WLAN is not set -# CONFIG_INPUT_MOUSEDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=32 -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_MANY_PORTS=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_8250_DETECT_IRQ=y -CONFIG_SERIAL_8250_RSA=y -# CONFIG_LEGACY_PTYS is not set -CONFIG_HW_RANDOM=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_OMAP=y -CONFIG_SPI=y -CONFIG_SPI_OMAP24XX=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_OMAP_WATCHDOG=y -CONFIG_TWL4030_CORE=y -CONFIG_REGULATOR=y -CONFIG_REGULATOR_TWL4030=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set -CONFIG_MMC=y -CONFIG_MMC_OMAP_HS=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_TWL4030=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_INOTIFY=y -CONFIG_QUOTA=y -CONFIG_QFMT_V2=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ISO8859_1=y -# CONFIG_ENABLE_WARN_DEPRECATED is not set -# CONFIG_ENABLE_MUST_CHECK is not set -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -# CONFIG_DETECT_SOFTLOCKUP is not set -CONFIG_DETECT_HUNG_TASK=y -# CONFIG_SCHED_DEBUG is not set -# CONFIG_DEBUG_PREEMPT is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -# CONFIG_FTRACE is not set -# CONFIG_ARM_UNWIND is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_ANSI_CPRNG is not set -CONFIG_CRC_CCITT=y -CONFIG_CRC_T10DIF=y -CONFIG_LIBCRC32C=y diff --git a/arch/arm/configs/omap_generic_2420_defconfig b/arch/arm/configs/omap_generic_2420_defconfig deleted file mode 100644 index ac08e51180d..00000000000 --- a/arch/arm/configs/omap_generic_2420_defconfig +++ /dev/null @@ -1,37 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_OMAP=y -CONFIG_ARCH_OMAP2=y -# CONFIG_OMAP_MUX is not set -CONFIG_MACH_OMAP_GENERIC=y -CONFIG_ARCH_OMAP2420=y -CONFIG_LEDS=y -CONFIG_ZBOOT_ROM_TEXT=0x10C08000 -CONFIG_ZBOOT_ROM_BSS=0x10200000 -CONFIG_FPE_NWFPE=y -CONFIG_BLK_DEV_RAM=y -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_VIDEO_OUTPUT_CONTROL=m -# CONFIG_VGA_CONSOLE is not set -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_INOTIFY=y -CONFIG_ROMFS_FS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y -CONFIG_DEBUG_LL=y -CONFIG_CRC_CCITT=y diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index facfaeb1ae5..9a304d854e3 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -12,7 +12,7 @@ obj-$(CONFIG_OMAP_MPU_TIMER) += time.o obj-$(CONFIG_OMAP_32K_TIMER) += timer32k.o # Power Management -obj-$(CONFIG_PM) += pm.o sleep.o +obj-$(CONFIG_PM) += pm.o sleep.o pm_bus.o # DSP obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c index 311899ff5ff..7ea75c11653 100644 --- a/arch/arm/mach-omap1/board-htcherald.c +++ b/arch/arm/mach-omap1/board-htcherald.c @@ -30,6 +30,13 @@ #include <linux/input.h> #include <linux/io.h> #include <linux/gpio.h> +#include <linux/gpio_keys.h> +#include <linux/i2c.h> +#include <linux/i2c-gpio.h> +#include <linux/htcpld.h> +#include <linux/leds.h> +#include <linux/spi/spi.h> +#include <linux/spi/ads7846.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -39,6 +46,7 @@ #include <plat/board.h> #include <plat/keypad.h> #include <plat/usb.h> +#include <plat/mmc.h> #include <mach/irqs.h> @@ -52,13 +60,123 @@ #define OMAP_LCDC_CTRL_LCD_EN (1 << 0) #define OMAP_LCDC_STAT_DONE (1 << 0) -static struct omap_lcd_config htcherald_lcd_config __initdata = { - .ctrl_name = "internal", -}; +/* GPIO definitions for the power button and keyboard slide switch */ +#define HTCHERALD_GPIO_POWER 139 +#define HTCHERALD_GPIO_SLIDE 174 +#define HTCHERALD_GIRQ_BTNS 141 -static struct omap_board_config_kernel htcherald_config[] __initdata = { - { OMAP_TAG_LCD, &htcherald_lcd_config }, -}; +/* GPIO definitions for the touchscreen */ +#define HTCHERALD_GPIO_TS 76 + +/* HTCPLD definitions */ + +/* + * CPLD Logic + * + * Chip 3 - 0x03 + * + * Function 7 6 5 4 3 2 1 0 + * ------------------------------------ + * DPAD light x x x x x x x 1 + * SoundDev x x x x 1 x x x + * Screen white 1 x x x x x x x + * MMC power on x x x x x 1 x x + * Happy times (n) 0 x x x x 1 x x + * + * Chip 4 - 0x04 + * + * Function 7 6 5 4 3 2 1 0 + * ------------------------------------ + * Keyboard light x x x x x x x 1 + * LCD Bright (4) x x x x x 1 1 x + * LCD Bright (3) x x x x x 0 1 x + * LCD Bright (2) x x x x x 1 0 x + * LCD Bright (1) x x x x x 0 0 x + * LCD Off x x x x 0 x x x + * LCD image (fb) 1 x x x x x x x + * LCD image (white) 0 x x x x x x x + * Caps lock LED x x 1 x x x x x + * + * Chip 5 - 0x05 + * + * Function 7 6 5 4 3 2 1 0 + * ------------------------------------ + * Red (solid) x x x x x 1 x x + * Red (flash) x x x x x x 1 x + * Green (GSM flash) x x x x 1 x x x + * Green (GSM solid) x x x 1 x x x x + * Green (wifi flash) x x 1 x x x x x + * Blue (bt flash) x 1 x x x x x x + * DPAD Int Enable 1 x x x x x x 0 + * + * (Combinations of the above can be made for different colors.) + * The direction pad interrupt enable must be set each time the + * interrupt is handled. + * + * Chip 6 - 0x06 + * + * Function 7 6 5 4 3 2 1 0 + * ------------------------------------ + * Vibrator x x x x 1 x x x + * Alt LED x x x 1 x x x x + * Screen white 1 x x x x x x x + * Screen white x x 1 x x x x x + * Screen white x 0 x x x x x x + * Enable kbd dpad x x x x x x 0 x + * Happy Times 0 1 0 x x x 0 x + */ + +/* + * HTCPLD GPIO lines start 16 after OMAP_MAX_GPIO_LINES to account + * for the 16 MPUIO lines. + */ +#define HTCPLD_GPIO_START_OFFSET (OMAP_MAX_GPIO_LINES + 16) +#define HTCPLD_IRQ(chip, offset) (OMAP_IRQ_END + 8 * (chip) + (offset)) +#define HTCPLD_BASE(chip, offset) \ + (HTCPLD_GPIO_START_OFFSET + 8 * (chip) + (offset)) + +#define HTCPLD_GPIO_LED_DPAD HTCPLD_BASE(0, 0) +#define HTCPLD_GPIO_LED_KBD HTCPLD_BASE(1, 0) +#define HTCPLD_GPIO_LED_CAPS HTCPLD_BASE(1, 5) +#define HTCPLD_GPIO_LED_RED_FLASH HTCPLD_BASE(2, 1) +#define HTCPLD_GPIO_LED_RED_SOLID HTCPLD_BASE(2, 2) +#define HTCPLD_GPIO_LED_GREEN_FLASH HTCPLD_BASE(2, 3) +#define HTCPLD_GPIO_LED_GREEN_SOLID HTCPLD_BASE(2, 4) +#define HTCPLD_GPIO_LED_WIFI HTCPLD_BASE(2, 5) +#define HTCPLD_GPIO_LED_BT HTCPLD_BASE(2, 6) +#define HTCPLD_GPIO_LED_VIBRATE HTCPLD_BASE(3, 3) +#define HTCPLD_GPIO_LED_ALT HTCPLD_BASE(3, 4) + +#define HTCPLD_GPIO_RIGHT_KBD HTCPLD_BASE(6, 7) +#define HTCPLD_GPIO_UP_KBD HTCPLD_BASE(6, 6) +#define HTCPLD_GPIO_LEFT_KBD HTCPLD_BASE(6, 5) +#define HTCPLD_GPIO_DOWN_KBD HTCPLD_BASE(6, 4) + +#define HTCPLD_GPIO_RIGHT_DPAD HTCPLD_BASE(7, 7) +#define HTCPLD_GPIO_UP_DPAD HTCPLD_BASE(7, 6) +#define HTCPLD_GPIO_LEFT_DPAD HTCPLD_BASE(7, 5) +#define HTCPLD_GPIO_DOWN_DPAD HTCPLD_BASE(7, 4) +#define HTCPLD_GPIO_ENTER_DPAD HTCPLD_BASE(7, 3) + +/* + * The htcpld chip requires a gpio write to a specific line + * to re-enable interrupts after one has occurred. + */ +#define HTCPLD_GPIO_INT_RESET_HI HTCPLD_BASE(2, 7) +#define HTCPLD_GPIO_INT_RESET_LO HTCPLD_BASE(2, 0) + +/* Chip 5 */ +#define HTCPLD_IRQ_RIGHT_KBD HTCPLD_IRQ(0, 7) +#define HTCPLD_IRQ_UP_KBD HTCPLD_IRQ(0, 6) +#define HTCPLD_IRQ_LEFT_KBD HTCPLD_IRQ(0, 5) +#define HTCPLD_IRQ_DOWN_KBD HTCPLD_IRQ(0, 4) + +/* Chip 6 */ +#define HTCPLD_IRQ_RIGHT_DPAD HTCPLD_IRQ(1, 7) +#define HTCPLD_IRQ_UP_DPAD HTCPLD_IRQ(1, 6) +#define HTCPLD_IRQ_LEFT_DPAD HTCPLD_IRQ(1, 5) +#define HTCPLD_IRQ_DOWN_DPAD HTCPLD_IRQ(1, 4) +#define HTCPLD_IRQ_ENTER_DPAD HTCPLD_IRQ(1, 3) /* Keyboard definition */ @@ -140,6 +258,129 @@ static struct platform_device kp_device = { .resource = kp_resources, }; +/* GPIO buttons for keyboard slide and power button */ +static struct gpio_keys_button herald_gpio_keys_table[] = { + {BTN_0, HTCHERALD_GPIO_POWER, 1, "POWER", EV_KEY, 1, 20}, + {SW_LID, HTCHERALD_GPIO_SLIDE, 0, "SLIDE", EV_SW, 1, 20}, + + {KEY_LEFT, HTCPLD_GPIO_LEFT_KBD, 1, "LEFT", EV_KEY, 1, 20}, + {KEY_RIGHT, HTCPLD_GPIO_RIGHT_KBD, 1, "RIGHT", EV_KEY, 1, 20}, + {KEY_UP, HTCPLD_GPIO_UP_KBD, 1, "UP", EV_KEY, 1, 20}, + {KEY_DOWN, HTCPLD_GPIO_DOWN_KBD, 1, "DOWN", EV_KEY, 1, 20}, + + {KEY_LEFT, HTCPLD_GPIO_LEFT_DPAD, 1, "DLEFT", EV_KEY, 1, 20}, + {KEY_RIGHT, HTCPLD_GPIO_RIGHT_DPAD, 1, "DRIGHT", EV_KEY, 1, 20}, + {KEY_UP, HTCPLD_GPIO_UP_DPAD, 1, "DUP", EV_KEY, 1, 20}, + {KEY_DOWN, HTCPLD_GPIO_DOWN_DPAD, 1, "DDOWN", EV_KEY, 1, 20}, + {KEY_ENTER, HTCPLD_GPIO_ENTER_DPAD, 1, "DENTER", EV_KEY, 1, 20}, +}; + +static struct gpio_keys_platform_data herald_gpio_keys_data = { + .buttons = herald_gpio_keys_table, + .nbuttons = ARRAY_SIZE(herald_gpio_keys_table), + .rep = 1, +}; + +static struct platform_device herald_gpiokeys_device = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &herald_gpio_keys_data, + }, +}; + +/* LEDs for the Herald. These connect to the HTCPLD GPIO device. */ +static struct gpio_led gpio_leds[] = { + {"dpad", NULL, HTCPLD_GPIO_LED_DPAD, 0, 0, LEDS_GPIO_DEFSTATE_OFF}, + {"kbd", NULL, HTCPLD_GPIO_LED_KBD, 0, 0, LEDS_GPIO_DEFSTATE_OFF}, + {"vibrate", NULL, HTCPLD_GPIO_LED_VIBRATE, 0, 0, LEDS_GPIO_DEFSTATE_OFF}, + {"green_solid", NULL, HTCPLD_GPIO_LED_GREEN_SOLID, 0, 0, LEDS_GPIO_DEFSTATE_OFF}, + {"green_flash", NULL, HTCPLD_GPIO_LED_GREEN_FLASH, 0, 0, LEDS_GPIO_DEFSTATE_OFF}, + {"red_solid", "mmc0", HTCPLD_GPIO_LED_RED_SOLID, 0, 0, LEDS_GPIO_DEFSTATE_OFF}, + {"red_flash", NULL, HTCPLD_GPIO_LED_RED_FLASH, 0, 0, LEDS_GPIO_DEFSTATE_OFF}, + {"wifi", NULL, HTCPLD_GPIO_LED_WIFI, 0, 0, LEDS_GPIO_DEFSTATE_OFF}, + {"bt", NULL, HTCPLD_GPIO_LED_BT, 0, 0, LEDS_GPIO_DEFSTATE_OFF}, + {"caps", NULL, HTCPLD_GPIO_LED_CAPS, 0, 0, LEDS_GPIO_DEFSTATE_OFF}, + {"alt", NULL, HTCPLD_GPIO_LED_ALT, 0, 0, LEDS_GPIO_DEFSTATE_OFF}, +}; + +static struct gpio_led_platform_data gpio_leds_data = { + .leds = gpio_leds, + .num_leds = ARRAY_SIZE(gpio_leds), +}; + +static struct platform_device gpio_leds_device = { + .name = "leds-gpio", + .id = 0, + .dev = { + .platform_data = &gpio_leds_data, + }, +}; + +/* HTC PLD chips */ + +static struct resource htcpld_resources[] = { + [0] = { + .start = OMAP_GPIO_IRQ(HTCHERALD_GIRQ_BTNS), + .end = OMAP_GPIO_IRQ(HTCHERALD_GIRQ_BTNS), + .flags = IORESOURCE_IRQ, + }, +}; + +struct htcpld_chip_platform_data htcpld_chips[] = { + [0] = { + .addr = 0x03, + .reset = 0x04, + .num_gpios = 8, + .gpio_out_base = HTCPLD_BASE(0, 0), + .gpio_in_base = HTCPLD_BASE(4, 0), + }, + [1] = { + .addr = 0x04, + .reset = 0x8e, + .num_gpios = 8, + .gpio_out_base = HTCPLD_BASE(1, 0), + .gpio_in_base = HTCPLD_BASE(5, 0), + }, + [2] = { + .addr = 0x05, + .reset = 0x80, + .num_gpios = 8, + .gpio_out_base = HTCPLD_BASE(2, 0), + .gpio_in_base = HTCPLD_BASE(6, 0), + .irq_base = HTCPLD_IRQ(0, 0), + .num_irqs = 8, + }, + [3] = { + .addr = 0x06, + .reset = 0x40, + .num_gpios = 8, + .gpio_out_base = HTCPLD_BASE(3, 0), + .gpio_in_base = HTCPLD_BASE(7, 0), + .irq_base = HTCPLD_IRQ(1, 0), + .num_irqs = 8, + }, +}; + +struct htcpld_core_platform_data htcpld_pfdata = { + .int_reset_gpio_hi = HTCPLD_GPIO_INT_RESET_HI, + .int_reset_gpio_lo = HTCPLD_GPIO_INT_RESET_LO, + .i2c_adapter_id = 1, + + .chip = htcpld_chips, + .num_chip = ARRAY_SIZE(htcpld_chips), +}; + +static struct platform_device htcpld_device = { + .name = "i2c-htcpld", + .id = -1, + .resource = htcpld_resources, + .num_resources = ARRAY_SIZE(htcpld_resources), + .dev = { + .platform_data = &htcpld_pfdata, + }, +}; + /* USB Device */ static struct omap_usb_config htcherald_usb_config __initdata = { .otg = 0, @@ -150,14 +391,72 @@ static struct omap_usb_config htcherald_usb_config __initdata = { }; /* LCD Device resources */ +static struct omap_lcd_config htcherald_lcd_config __initdata = { + .ctrl_name = "internal", +}; + +static struct omap_board_config_kernel htcherald_config[] __initdata = { + { OMAP_TAG_LCD, &htcherald_lcd_config }, +}; + static struct platform_device lcd_device = { .name = "lcd_htcherald", .id = -1, }; +/* MMC Card */ +#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) +static struct omap_mmc_platform_data htc_mmc1_data = { + .nr_slots = 1, + .switch_slot = NULL, + .slots[0] = { + .ocr_mask = MMC_VDD_28_29 | MMC_VDD_30_31 | + MMC_VDD_32_33 | MMC_VDD_33_34, + .name = "mmcblk", + .nomux = 1, + .wires = 4, + .switch_pin = -1, + }, +}; + +static struct omap_mmc_platform_data *htc_mmc_data[1]; +#endif + + +/* Platform devices for the Herald */ static struct platform_device *devices[] __initdata = { &kp_device, &lcd_device, + &htcpld_device, + &gpio_leds_device, + &herald_gpiokeys_device, +}; + +/* + * Touchscreen + */ +static const struct ads7846_platform_data htcherald_ts_platform_data = { + .model = 7846, + .keep_vref_on = 1, + .x_plate_ohms = 496, + .gpio_pendown = HTCHERALD_GPIO_TS, + .pressure_max = 100000, + .pressure_min = 5000, + .x_min = 528, + .x_max = 3760, + .y_min = 624, + .y_max = 3760, +}; + +static struct spi_board_info __initdata htcherald_spi_board_info[] = { + { + .modalias = "ads7846", + .platform_data = &htcherald_ts_platform_data, + .irq = OMAP_GPIO_IRQ(HTCHERALD_GPIO_TS), + .max_speed_hz = 2500000, + .bus_num = 2, + .chip_select = 1, + } }; /* @@ -278,6 +577,7 @@ static void __init htcherald_init(void) { printk(KERN_INFO "HTC Herald init.\n"); + /* Do board initialization before we register all the devices */ omap_gpio_init(); omap_board_config = htcherald_config; @@ -288,6 +588,16 @@ static void __init htcherald_init(void) htcherald_usb_enable(); omap1_usb_init(&htcherald_usb_config); + + spi_register_board_info(htcherald_spi_board_info, + ARRAY_SIZE(htcherald_spi_board_info)); + + omap_register_i2c_bus(1, 100, NULL, 0); + +#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) + htc_mmc_data[0] = &htc_mmc1_data; + omap1_init_mmc(htc_mmc_data, 1); +#endif } static void __init htcherald_init_irq(void) diff --git a/arch/arm/mach-omap1/pm_bus.c b/arch/arm/mach-omap1/pm_bus.c new file mode 100644 index 00000000000..8b66392be74 --- /dev/null +++ b/arch/arm/mach-omap1/pm_bus.c @@ -0,0 +1,98 @@ +/* + * Runtime PM support code for OMAP1 + * + * Author: Kevin Hilman, Deep Root Systems, LLC + * + * Copyright (C) 2010 Texas Instruments, Inc. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/io.h> +#include <linux/pm_runtime.h> +#include <linux/platform_device.h> +#include <linux/mutex.h> +#include <linux/clk.h> +#include <linux/err.h> + +#include <plat/omap_device.h> +#include <plat/omap-pm.h> + +#ifdef CONFIG_PM_RUNTIME +static int omap1_pm_runtime_suspend(struct device *dev) +{ + struct clk *iclk, *fclk; + int ret = 0; + + dev_dbg(dev, "%s\n", __func__); + + ret = pm_generic_runtime_suspend(dev); + + fclk = clk_get(dev, "fck"); + if (!IS_ERR(fclk)) { + clk_disable(fclk); + clk_put(fclk); + } + + iclk = clk_get(dev, "ick"); + if (!IS_ERR(iclk)) { + clk_disable(iclk); + clk_put(iclk); + } + + return 0; +}; + +static int omap1_pm_runtime_resume(struct device *dev) +{ + int ret = 0; + struct clk *iclk, *fclk; + + dev_dbg(dev, "%s\n", __func__); + + iclk = clk_get(dev, "ick"); + if (!IS_ERR(iclk)) { + clk_enable(iclk); + clk_put(iclk); + } + + fclk = clk_get(dev, "fck"); + if (!IS_ERR(fclk)) { + clk_enable(fclk); + clk_put(fclk); + } + + return pm_generic_runtime_resume(dev); +}; + +static int __init omap1_pm_runtime_init(void) +{ + const struct dev_pm_ops *pm; + struct dev_pm_ops *omap_pm; + + pm = platform_bus_get_pm_ops(); + if (!pm) { + pr_err("%s: unable to get dev_pm_ops from platform_bus\n", + __func__); + return -ENODEV; + } + + omap_pm = kmemdup(pm, sizeof(struct dev_pm_ops), GFP_KERNEL); + if (!omap_pm) { + pr_err("%s: unable to alloc memory for new dev_pm_ops\n", + __func__); + return -ENOMEM; + } + + omap_pm->runtime_suspend = omap1_pm_runtime_suspend; + omap_pm->runtime_resume = omap1_pm_runtime_resume; + + platform_bus_set_pm_ops(omap_pm); + + return 0; +} +core_initcall(omap1_pm_runtime_init); +#endif /* CONFIG_PM_RUNTIME */ diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index b48bacf0a7a..bb85f24c364 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -35,7 +35,7 @@ config ARCH_OMAP3 default y select CPU_V7 select USB_ARCH_HAS_EHCI - select ARM_L1_CACHE_SHIFT_6 + select ARM_L1_CACHE_SHIFT_6 if !ARCH_OMAP4 config ARCH_OMAP4 bool "TI OMAP4" @@ -43,6 +43,8 @@ config ARCH_OMAP4 depends on ARCH_OMAP2PLUS select CPU_V7 select ARM_GIC + select PL310_ERRATA_588369 + select ARM_ERRATA_720789 comment "OMAP Core Type" depends on ARCH_OMAP2 diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 88d3a1e920f..e599ae2a5de 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -5,7 +5,7 @@ # Common support obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o pm.o -omap-2-3-common = irq.o sdrc.o +omap-2-3-common = irq.o sdrc.o prm2xxx_3xxx.o hwmod-common = omap_hwmod.o \ omap_hwmod_common_data.o prcm-common = prcm.o powerdomain.o @@ -15,7 +15,7 @@ clock-common = clock.o clock_common_data.o \ obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(prcm-common) $(hwmod-common) obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(prcm-common) $(hwmod-common) -obj-$(CONFIG_ARCH_OMAP4) += $(prcm-common) $(hwmod-common) +obj-$(CONFIG_ARCH_OMAP4) += $(prcm-common) prm44xx.o $(hwmod-common) obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o @@ -49,14 +49,18 @@ obj-$(CONFIG_ARCH_OMAP2) += sdrc2xxx.o # Power Management ifeq ($(CONFIG_PM),y) obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o -obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o -obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o cpuidle34xx.o -obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o +obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o pm_bus.o +obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o cpuidle34xx.o pm_bus.o +obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o pm_bus.o obj-$(CONFIG_PM_DEBUG) += pm-debug.o AFLAGS_sleep24xx.o :=-Wa,-march=armv6 AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a +ifeq ($(CONFIG_PM_VERBOSE),y) +CFLAGS_pm_bus.o += -DDEBUG +endif + endif # PRCM @@ -87,6 +91,7 @@ obj-$(CONFIG_ARCH_OMAP2430) += opp2430_data.o obj-$(CONFIG_ARCH_OMAP2420) += omap_hwmod_2420_data.o obj-$(CONFIG_ARCH_OMAP2430) += omap_hwmod_2430_data.o obj-$(CONFIG_ARCH_OMAP3) += omap_hwmod_3xxx_data.o +obj-$(CONFIG_ARCH_OMAP4) += omap_hwmod_44xx_data.o # EMU peripherals obj-$(CONFIG_OMAP3_EMU) += emu.o diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index 8538e4131d2..fc178a022dd 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -19,6 +19,7 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> +#include <linux/mmc/host.h> #include <linux/delay.h> #include <linux/i2c/twl.h> #include <linux/err.h> @@ -190,7 +191,7 @@ static int __init omap2430_i2c_init(void) static struct omap2_hsmmc_info mmc[] __initdata = { { .mmc = 1, - .wires = 4, + .caps = MMC_CAP_4_BIT_DATA, .gpio_cd = -EINVAL, .gpio_wp = -EINVAL, .ext_clock = 1, diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 67b95b5f1a2..3eb9839e33e 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -24,6 +24,7 @@ #include <linux/regulator/machine.h> #include <linux/io.h> #include <linux/gpio.h> +#include <linux/mmc/host.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -353,12 +354,12 @@ static struct omap2_hsmmc_info mmc[] = { /* 8 bits (default) requires S6.3 == ON, * so the SIM card isn't used; else 4 bits. */ - .wires = 8, + .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, .gpio_wp = 4, }, { .mmc = 2, - .wires = 8, + .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, .gpio_wp = 7, }, {} /* Terminator */ diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 9447644774c..1bed1e666a6 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -20,6 +20,7 @@ #include <linux/usb/otg.h> #include <linux/spi/spi.h> #include <linux/i2c/twl.h> +#include <linux/gpio_keys.h> #include <linux/regulator/machine.h> #include <linux/leds.h> @@ -40,6 +41,8 @@ #define ETH_KS8851_IRQ 34 #define ETH_KS8851_POWER_ON 48 #define ETH_KS8851_QUART 138 +#define OMAP4_SFH7741_SENSOR_OUTPUT_GPIO 184 +#define OMAP4_SFH7741_ENABLE_GPIO 188 static struct gpio_led sdp4430_gpio_leds[] = { { @@ -77,11 +80,47 @@ static struct gpio_led sdp4430_gpio_leds[] = { }; +static struct gpio_keys_button sdp4430_gpio_keys[] = { + { + .desc = "Proximity Sensor", + .type = EV_SW, + .code = SW_FRONT_PROXIMITY, + .gpio = OMAP4_SFH7741_SENSOR_OUTPUT_GPIO, + .active_low = 0, + } +}; + static struct gpio_led_platform_data sdp4430_led_data = { .leds = sdp4430_gpio_leds, .num_leds = ARRAY_SIZE(sdp4430_gpio_leds), }; +static int omap_prox_activate(struct device *dev) +{ + gpio_set_value(OMAP4_SFH7741_ENABLE_GPIO , 1); + return 0; +} + +static void omap_prox_deactivate(struct device *dev) +{ + gpio_set_value(OMAP4_SFH7741_ENABLE_GPIO , 0); +} + +static struct gpio_keys_platform_data sdp4430_gpio_keys_data = { + .buttons = sdp4430_gpio_keys, + .nbuttons = ARRAY_SIZE(sdp4430_gpio_keys), + .enable = omap_prox_activate, + .disable = omap_prox_deactivate, +}; + +static struct platform_device sdp4430_gpio_keys_device = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &sdp4430_gpio_keys_data, + }, +}; + static struct platform_device sdp4430_leds_gpio = { .name = "leds-gpio", .id = -1, @@ -161,6 +200,7 @@ static struct platform_device sdp4430_lcd_device = { static struct platform_device *sdp4430_devices[] __initdata = { &sdp4430_lcd_device, + &sdp4430_gpio_keys_device, &sdp4430_leds_gpio, }; @@ -193,12 +233,12 @@ static struct omap_musb_board_data musb_board_data = { static struct omap2_hsmmc_info mmc[] = { { .mmc = 1, - .wires = 8, + .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, .gpio_wp = -EINVAL, }, { .mmc = 2, - .wires = 8, + .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, .gpio_cd = -EINVAL, .gpio_wp = -EINVAL, .nonremovable = true, @@ -412,6 +452,11 @@ static struct i2c_board_info __initdata sdp4430_i2c_3_boardinfo[] = { I2C_BOARD_INFO("tmp105", 0x48), }, }; +static struct i2c_board_info __initdata sdp4430_i2c_4_boardinfo[] = { + { + I2C_BOARD_INFO("hmc5843", 0x1e), + }, +}; static int __init omap4_i2c_init(void) { /* @@ -423,14 +468,36 @@ static int __init omap4_i2c_init(void) omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, sdp4430_i2c_3_boardinfo, ARRAY_SIZE(sdp4430_i2c_3_boardinfo)); - omap_register_i2c_bus(4, 400, NULL, 0); + omap_register_i2c_bus(4, 400, sdp4430_i2c_4_boardinfo, + ARRAY_SIZE(sdp4430_i2c_4_boardinfo)); return 0; } + +static void __init omap_sfh7741prox_init(void) +{ + int error; + + error = gpio_request(OMAP4_SFH7741_ENABLE_GPIO, "sfh7741"); + if (error < 0) { + pr_err("%s:failed to request GPIO %d, error %d\n", + __func__, OMAP4_SFH7741_ENABLE_GPIO, error); + return; + } + + error = gpio_direction_output(OMAP4_SFH7741_ENABLE_GPIO , 0); + if (error < 0) { + pr_err("%s: GPIO configuration failed: GPIO %d,error %d\n", + __func__, OMAP4_SFH7741_ENABLE_GPIO, error); + gpio_free(OMAP4_SFH7741_ENABLE_GPIO); + } +} + static void __init omap_4430sdp_init(void) { int status; omap4_i2c_init(); + omap_sfh7741prox_init(); platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices)); omap_serial_init(); omap4_twl6030_hsmmc_init(mmc); diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index e10bc109415..b72009a50f0 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -31,6 +31,7 @@ #include <linux/i2c/at24.h> #include <linux/i2c/twl.h> #include <linux/regulator/machine.h> +#include <linux/mmc/host.h> #include <linux/spi/spi.h> #include <linux/spi/tdo24m.h> @@ -579,14 +580,14 @@ static struct twl4030_keypad_data cm_t35_kp_data = { static struct omap2_hsmmc_info mmc[] = { { .mmc = 1, - .wires = 4, + .caps = MMC_CAP_4_BIT_DATA, .gpio_cd = -EINVAL, .gpio_wp = -EINVAL, }, { .mmc = 2, - .wires = 4, + .caps = MMC_CAP_4_BIT_DATA, .transceiver = 1, .gpio_cd = -EINVAL, .gpio_wp = -EINVAL, diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index a07086d6a0b..de5e2c2f4e8 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -28,6 +28,7 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/mtd/nand.h> +#include <linux/mmc/host.h> #include <linux/regulator/machine.h> #include <linux/i2c/twl.h> @@ -105,7 +106,7 @@ static struct omap_nand_platform_data devkit8000_nand_data = { static struct omap2_hsmmc_info mmc[] = { { .mmc = 1, - .wires = 8, + .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, .gpio_wp = 29, }, {} /* Terminator */ diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 175f0433976..f3f02805691 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -20,6 +20,7 @@ #include <linux/regulator/machine.h> #include <linux/i2c/twl.h> +#include <linux/mmc/host.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -248,13 +249,13 @@ static struct regulator_init_data igep2_vmmc2 = { static struct omap2_hsmmc_info mmc[] = { { .mmc = 1, - .wires = 4, + .caps = MMC_CAP_4_BIT_DATA, .gpio_cd = -EINVAL, .gpio_wp = -EINVAL, }, { .mmc = 2, - .wires = 4, + .caps = MMC_CAP_4_BIT_DATA, .gpio_cd = -EINVAL, .gpio_wp = -EINVAL, }, diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index 00d9b13b01c..58698e359cc 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -27,6 +27,7 @@ #include <linux/i2c/twl.h> #include <linux/io.h> #include <linux/smsc911x.h> +#include <linux/mmc/host.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -362,7 +363,7 @@ static int __init omap_i2c_init(void) static struct omap2_hsmmc_info mmc[] __initdata = { { .mmc = 1, - .wires = 4, + .caps = MMC_CAP_4_BIT_DATA, .gpio_cd = -EINVAL, .gpio_wp = -EINVAL, }, diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index a3e2b49aa39..7a93bd5b24c 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -20,6 +20,7 @@ #include <linux/i2c.h> #include <linux/spi/spi.h> #include <linux/usb/musb.h> +#include <sound/tlv320aic3x.h> #include <asm/mach/arch.h> #include <asm/mach-types.h> @@ -487,7 +488,7 @@ static struct omap_mmc_platform_data mmc1_data = { .max_freq = 24000000, .dma_mask = 0xffffffff, .slots[0] = { - .wires = 4, + .caps = MMC_CAP_4_BIT_DATA, .set_power = n8x0_mmc_set_power, .set_bus_mode = n8x0_mmc_set_bus_mode, .get_cover_state = n8x0_mmc_get_cover_state, @@ -614,29 +615,35 @@ static int n8x0_menelaus_late_init(struct device *dev) return 0; } -static struct i2c_board_info __initdata n8x0_i2c_board_info_1[] = { +#else +static int n8x0_menelaus_late_init(struct device *dev) +{ + return 0; +} +#endif + +static struct menelaus_platform_data n8x0_menelaus_platform_data __initdata = { + .late_init = n8x0_menelaus_late_init, +}; + +static struct i2c_board_info __initdata n8x0_i2c_board_info_1[] __initdata = { { I2C_BOARD_INFO("menelaus", 0x72), .irq = INT_24XX_SYS_NIRQ, + .platform_data = &n8x0_menelaus_platform_data, }, }; -static struct menelaus_platform_data n8x0_menelaus_platform_data = { - .late_init = n8x0_menelaus_late_init, +static struct aic3x_pdata n810_aic33_data __initdata = { + .gpio_reset = 118, }; -static void __init n8x0_menelaus_init(void) -{ - n8x0_i2c_board_info_1[0].platform_data = &n8x0_menelaus_platform_data; - omap_register_i2c_bus(1, 400, n8x0_i2c_board_info_1, - ARRAY_SIZE(n8x0_i2c_board_info_1)); -} - -#else -static inline void __init n8x0_menelaus_init(void) -{ -} -#endif +static struct i2c_board_info n810_i2c_board_info_2[] __initdata = { + { + I2C_BOARD_INFO("tlv320aic3x", 0x18), + .platform_data = &n810_aic33_data, + }, +}; static void __init n8x0_map_io(void) { @@ -653,6 +660,11 @@ static void __init n8x0_init_irq(void) #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { + /* I2S codec port pins for McBSP block */ + OMAP2420_MUX(EAC_AC_SCLK, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), + OMAP2420_MUX(EAC_AC_FS, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), + OMAP2420_MUX(EAC_AC_DIN, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), + OMAP2420_MUX(EAC_AC_DOUT, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT), { .reg_offset = OMAP_MUX_TERMINATOR }, }; #else @@ -665,9 +677,14 @@ static void __init n8x0_init_machine(void) /* FIXME: add n810 spi devices */ spi_register_board_info(n800_spi_board_info, ARRAY_SIZE(n800_spi_board_info)); + omap_register_i2c_bus(1, 400, n8x0_i2c_board_info_1, + ARRAY_SIZE(n8x0_i2c_board_info_1)); + omap_register_i2c_bus(2, 400, NULL, 0); + if (machine_is_nokia_n810()) + i2c_register_board_info(2, n810_i2c_board_info_2, + ARRAY_SIZE(n810_i2c_board_info_2)); omap_serial_init(); - n8x0_menelaus_init(); n8x0_onenand_init(); n8x0_mmc_init(); n8x0_usb_init(); diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 87969c7df65..7e704887864 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -27,6 +27,7 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/mtd/nand.h> +#include <linux/mmc/host.h> #include <linux/regulator/machine.h> #include <linux/i2c/twl.h> @@ -50,6 +51,93 @@ #define NAND_BLOCK_SIZE SZ_128K +/* + * OMAP3 Beagle revision + * Run time detection of Beagle revision is done by reading GPIO. + * GPIO ID - + * AXBX = GPIO173, GPIO172, GPIO171: 1 1 1 + * C1_3 = GPIO173, GPIO172, GPIO171: 1 1 0 + * C4 = GPIO173, GPIO172, GPIO171: 1 0 1 + * XM = GPIO173, GPIO172, GPIO171: 0 0 0 + */ +enum { + OMAP3BEAGLE_BOARD_UNKN = 0, + OMAP3BEAGLE_BOARD_AXBX, + OMAP3BEAGLE_BOARD_C1_3, + OMAP3BEAGLE_BOARD_C4, + OMAP3BEAGLE_BOARD_XM, +}; + +static u8 omap3_beagle_version; + +static u8 omap3_beagle_get_rev(void) +{ + return omap3_beagle_version; +} + +static void __init omap3_beagle_init_rev(void) +{ + int ret; + u16 beagle_rev = 0; + + omap_mux_init_gpio(171, OMAP_PIN_INPUT_PULLUP); + omap_mux_init_gpio(172, OMAP_PIN_INPUT_PULLUP); + omap_mux_init_gpio(173, OMAP_PIN_INPUT_PULLUP); + + ret = gpio_request(171, "rev_id_0"); + if (ret < 0) + goto fail0; + + ret = gpio_request(172, "rev_id_1"); + if (ret < 0) + goto fail1; + + ret = gpio_request(173, "rev_id_2"); + if (ret < 0) + goto fail2; + + gpio_direction_input(171); + gpio_direction_input(172); + gpio_direction_input(173); + + beagle_rev = gpio_get_value(171) | (gpio_get_value(172) << 1) + | (gpio_get_value(173) << 2); + + switch (beagle_rev) { + case 7: + printk(KERN_INFO "OMAP3 Beagle Rev: Ax/Bx\n"); + omap3_beagle_version = OMAP3BEAGLE_BOARD_AXBX; + break; + case 6: + printk(KERN_INFO "OMAP3 Beagle Rev: C1/C2/C3\n"); + omap3_beagle_version = OMAP3BEAGLE_BOARD_C1_3; + break; + case 5: + printk(KERN_INFO "OMAP3 Beagle Rev: C4\n"); + omap3_beagle_version = OMAP3BEAGLE_BOARD_C4; + break; + case 0: + printk(KERN_INFO "OMAP3 Beagle Rev: xM\n"); + omap3_beagle_version = OMAP3BEAGLE_BOARD_XM; + break; + default: + printk(KERN_INFO "OMAP3 Beagle Rev: unknown %hd\n", beagle_rev); + omap3_beagle_version = OMAP3BEAGLE_BOARD_UNKN; + } + + return; + +fail2: + gpio_free(172); +fail1: + gpio_free(171); +fail0: + printk(KERN_ERR "Unable to get revision detection GPIO pins\n"); + omap3_beagle_version = OMAP3BEAGLE_BOARD_UNKN; + + return; +} + static struct mtd_partition omap3beagle_nand_partitions[] = { /* All the partition sizes are listed in terms of NAND block size */ { @@ -166,7 +254,7 @@ static void __init beagle_display_init(void) static struct omap2_hsmmc_info mmc[] = { { .mmc = 1, - .wires = 8, + .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, .gpio_wp = 29, }, {} /* Terminator */ @@ -185,7 +273,10 @@ static struct gpio_led gpio_leds[]; static int beagle_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { - if (system_rev >= 0x20 && system_rev <= 0x34301000) { + if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) { + mmc[0].gpio_wp = -EINVAL; + } else if ((omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_C1_3) || + (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_C4)) { omap_mux_init_gpio(23, OMAP_PIN_INPUT); mmc[0].gpio_wp = 23; } else { @@ -322,13 +413,19 @@ static struct i2c_board_info __initdata beagle_i2c_boardinfo[] = { }, }; +static struct i2c_board_info __initdata beagle_i2c_eeprom[] = { + { + I2C_BOARD_INFO("eeprom", 0x50), + }, +}; + static int __init omap3_beagle_i2c_init(void) { omap_register_i2c_bus(1, 2600, beagle_i2c_boardinfo, ARRAY_SIZE(beagle_i2c_boardinfo)); /* Bus 3 is attached to the DVI port where devices like the pico DLP * projector don't work reliably with 400kHz */ - omap_register_i2c_bus(3, 100, NULL, 0); + omap_register_i2c_bus(3, 100, beagle_i2c_eeprom, ARRAY_SIZE(beagle_i2c_eeprom)); return 0; } @@ -464,6 +561,7 @@ static struct omap_musb_board_data musb_board_data = { static void __init omap3_beagle_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); + omap3_beagle_init_rev(); omap3_beagle_i2c_init(); platform_add_devices(omap3_beagle_devices, ARRAY_SIZE(omap3_beagle_devices)); diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index f76d9c0a47a..523ba551ee7 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -31,6 +31,7 @@ #include <linux/smsc911x.h> #include <linux/regulator/machine.h> +#include <linux/mmc/host.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -370,7 +371,7 @@ static struct regulator_init_data omap3evm_vsim = { static struct omap2_hsmmc_info mmc[] = { { .mmc = 1, - .wires = 4, + .caps = MMC_CAP_4_BIT_DATA, .gpio_cd = -EINVAL, .gpio_wp = 63, }, diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index dd3af2be13b..2d2e6fc127a 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -32,6 +32,7 @@ #include <linux/input.h> #include <linux/input/matrix_keypad.h> #include <linux/gpio_keys.h> +#include <linux/mmc/host.h> #include <linux/mmc/card.h> #include <asm/mach-types.h> @@ -276,14 +277,14 @@ static void pandora_wl1251_init_card(struct mmc_card *card) static struct omap2_hsmmc_info omap3pandora_mmc[] = { { .mmc = 1, - .wires = 4, + .caps = MMC_CAP_4_BIT_DATA, .gpio_cd = -EINVAL, .gpio_wp = 126, .ext_clock = 0, }, { .mmc = 2, - .wires = 4, + .caps = MMC_CAP_4_BIT_DATA, .gpio_cd = -EINVAL, .gpio_wp = 127, .ext_clock = 1, @@ -291,7 +292,7 @@ static struct omap2_hsmmc_info omap3pandora_mmc[] = { }, { .mmc = 3, - .wires = 4, + .caps = MMC_CAP_4_BIT_DATA, .gpio_cd = -EINVAL, .gpio_wp = -EINVAL, .init_card = pandora_wl1251_init_card, diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index bcd01d278c6..c1b881d3d8a 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -26,6 +26,7 @@ #include <linux/regulator/machine.h> #include <linux/i2c/twl.h> +#include <linux/mmc/host.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -275,7 +276,7 @@ static struct regulator_init_data omap3stalker_vsim = { static struct omap2_hsmmc_info mmc[] = { { .mmc = 1, - .wires = 4, + .caps = MMC_CAP_4_BIT_DATA, .gpio_cd = -EINVAL, .gpio_wp = 23, }, diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index 663c62d271e..9ab18fdd974 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -27,6 +27,7 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/mtd/nand.h> +#include <linux/mmc/host.h> #include <plat/mcspi.h> #include <linux/spi/spi.h> @@ -108,7 +109,7 @@ static struct omap_nand_platform_data omap3touchbook_nand_data = { static struct omap2_hsmmc_info mmc[] = { { .mmc = 1, - .wires = 8, + .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, .gpio_wp = 29, }, {} /* Terminator */ diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index c03d1d56db5..aa8296e7e9d 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -20,6 +20,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/leds.h> #include <linux/gpio.h> #include <linux/usb/otg.h> #include <linux/i2c/twl.h> @@ -40,6 +41,36 @@ #include "hsmmc.h" +static struct gpio_led gpio_leds[] = { + { + .name = "pandaboard::status1", + .default_trigger = "heartbeat", + .gpio = 7, + }, + { + .name = "pandaboard::status2", + .default_trigger = "mmc0", + .gpio = 8, + }, +}; + +static struct gpio_led_platform_data gpio_led_info = { + .leds = gpio_leds, + .num_leds = ARRAY_SIZE(gpio_leds), +}; + +static struct platform_device leds_gpio = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &gpio_led_info, + }, +}; + +static struct platform_device *panda_devices[] __initdata = { + &leds_gpio, +}; + static void __init omap4_panda_init_irq(void) { omap2_init_common_hw(NULL, NULL); @@ -56,7 +87,7 @@ static struct omap_musb_board_data musb_board_data = { static struct omap2_hsmmc_info mmc[] = { { .mmc = 1, - .wires = 8, + .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, .gpio_wp = -EINVAL, }, {} /* Terminator */ @@ -274,9 +305,8 @@ static int __init omap4_panda_i2c_init(void) } static void __init omap4_panda_init(void) { - int status; - omap4_panda_i2c_init(); + platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices)); omap_serial_init(); omap4_twl6030_hsmmc_init(mmc); /* OMAP4 Panda uses internal transceiver so register nop transceiver */ diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 4c484361835..93441e5b36e 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -32,6 +32,7 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> +#include <linux/mmc/host.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -303,13 +304,13 @@ static void __init overo_flash_init(void) static struct omap2_hsmmc_info mmc[] = { { .mmc = 1, - .wires = 4, + .caps = MMC_CAP_4_BIT_DATA, .gpio_cd = -EINVAL, .gpio_wp = -EINVAL, }, { .mmc = 2, - .wires = 4, + .caps = MMC_CAP_4_BIT_DATA, .gpio_cd = -EINVAL, .gpio_wp = -EINVAL, .transceiver = true, diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 9a5eb87425f..a3dbaa7b863 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -302,7 +302,7 @@ static struct omap2_hsmmc_info mmc[] __initdata = { { .name = "external", .mmc = 1, - .wires = 4, + .caps = MMC_CAP_4_BIT_DATA, .cover_only = true, .gpio_cd = 160, .gpio_wp = -EINVAL, @@ -311,7 +311,8 @@ static struct omap2_hsmmc_info mmc[] __initdata = { { .name = "internal", .mmc = 2, - .wires = 8, /* See also rx51_mmc2_remux */ + .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, + /* See also rx51_mmc2_remux */ .gpio_cd = -EINVAL, .gpio_wp = -EINVAL, .nonremovable = true, diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index 6b3984964cc..e5eac46bbac 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -16,6 +16,7 @@ #include <linux/gpio.h> #include <linux/i2c/twl.h> #include <linux/regulator/machine.h> +#include <linux/mmc/host.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -155,14 +156,14 @@ static struct omap2_hsmmc_info mmc[] __initdata = { { .name = "external", .mmc = 1, - .wires = 4, + .caps = MMC_CAP_4_BIT_DATA, .gpio_wp = -EINVAL, .power_saving = true, }, { .name = "internal", .mmc = 2, - .wires = 8, + .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, .gpio_cd = -EINVAL, .gpio_wp = -EINVAL, .nonremovable = true, diff --git a/arch/arm/mach-omap2/clock2420_data.c b/arch/arm/mach-omap2/clock2420_data.c index 37d65d62ed8..5f2066a6ba7 100644 --- a/arch/arm/mach-omap2/clock2420_data.c +++ b/arch/arm/mach-omap2/clock2420_data.c @@ -1838,7 +1838,7 @@ static struct omap_clk omap2420_clks[] = { CLK(NULL, "des_ick", &des_ick, CK_242X), CLK("omap-sham", "ick", &sha_ick, CK_242X), CLK("omap_rng", "ick", &rng_ick, CK_242X), - CLK(NULL, "aes_ick", &aes_ick, CK_242X), + CLK("omap-aes", "ick", &aes_ick, CK_242X), CLK(NULL, "pka_ick", &pka_ick, CK_242X), CLK(NULL, "usb_fck", &usb_fck, CK_242X), CLK("musb_hdrc", "fck", &osc_ck, CK_242X), diff --git a/arch/arm/mach-omap2/clock2430_data.c b/arch/arm/mach-omap2/clock2430_data.c index b33118fb6a8..701a1716019 100644 --- a/arch/arm/mach-omap2/clock2430_data.c +++ b/arch/arm/mach-omap2/clock2430_data.c @@ -1926,7 +1926,7 @@ static struct omap_clk omap2430_clks[] = { CLK(NULL, "des_ick", &des_ick, CK_243X), CLK("omap-sham", "ick", &sha_ick, CK_243X), CLK("omap_rng", "ick", &rng_ick, CK_243X), - CLK(NULL, "aes_ick", &aes_ick, CK_243X), + CLK("omap-aes", "ick", &aes_ick, CK_243X), CLK(NULL, "pka_ick", &pka_ick, CK_243X), CLK(NULL, "usb_fck", &usb_fck, CK_243X), CLK("musb_hdrc", "ick", &usbhs_ick, CK_243X), diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index dfdce2d8277..c73906d1745 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -3288,7 +3288,7 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "usbtll_ick", &usbtll_ick, CK_3430ES2 | CK_AM35XX), CLK("mmci-omap-hs.2", "ick", &mmchs3_ick, CK_3430ES2 | CK_AM35XX), CLK(NULL, "icr_ick", &icr_ick, CK_343X), - CLK(NULL, "aes2_ick", &aes2_ick, CK_343X), + CLK("omap-aes", "ick", &aes2_ick, CK_343X), CLK("omap-sham", "ick", &sha12_ick, CK_343X), CLK(NULL, "des2_ick", &des2_ick, CK_343X), CLK("mmci-omap-hs.1", "ick", &mmchs2_ick, CK_3XXX), diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c index 5d80cb89748..6fb61b1a0d4 100644 --- a/arch/arm/mach-omap2/clockdomain.c +++ b/arch/arm/mach-omap2/clockdomain.c @@ -258,97 +258,6 @@ static void _omap2_clkdm_set_hwsup(struct clockdomain *clkdm, int enable) } -/** - * _init_wkdep_usecount - initialize wkdep usecounts to match hardware - * @clkdm: clockdomain to initialize wkdep usecounts - * - * Initialize the wakeup dependency usecount variables for clockdomain @clkdm. - * If a wakeup dependency is present in the hardware, the usecount will be - * set to 1; otherwise, it will be set to 0. Software should clear all - * software wakeup dependencies prior to calling this function if it wishes - * to ensure that all usecounts start at 0. No return value. - */ -static void _init_wkdep_usecount(struct clockdomain *clkdm) -{ - u32 v; - struct clkdm_dep *cd; - - if (!clkdm->wkdep_srcs) - return; - - for (cd = clkdm->wkdep_srcs; cd->clkdm_name; cd++) { - if (!omap_chip_is(cd->omap_chip)) - continue; - - if (!cd->clkdm && cd->clkdm_name) - cd->clkdm = _clkdm_lookup(cd->clkdm_name); - - if (!cd->clkdm) { - WARN(!cd->clkdm, "clockdomain: %s: wkdep clkdm %s not " - "found\n", clkdm->name, cd->clkdm_name); - continue; - } - - v = prm_read_mod_bits_shift(clkdm->pwrdm.ptr->prcm_offs, - PM_WKDEP, - (1 << cd->clkdm->dep_bit)); - - if (v) - pr_debug("clockdomain: %s: wakeup dependency already " - "set to wake up when %s wakes\n", - clkdm->name, cd->clkdm->name); - - atomic_set(&cd->wkdep_usecount, (v) ? 1 : 0); - } -} - -/** - * _init_sleepdep_usecount - initialize sleepdep usecounts to match hardware - * @clkdm: clockdomain to initialize sleepdep usecounts - * - * Initialize the sleep dependency usecount variables for clockdomain @clkdm. - * If a sleep dependency is present in the hardware, the usecount will be - * set to 1; otherwise, it will be set to 0. Software should clear all - * software sleep dependencies prior to calling this function if it wishes - * to ensure that all usecounts start at 0. No return value. - */ -static void _init_sleepdep_usecount(struct clockdomain *clkdm) -{ - u32 v; - struct clkdm_dep *cd; - - if (!cpu_is_omap34xx()) - return; - - if (!clkdm->sleepdep_srcs) - return; - - for (cd = clkdm->sleepdep_srcs; cd->clkdm_name; cd++) { - if (!omap_chip_is(cd->omap_chip)) - continue; - - if (!cd->clkdm && cd->clkdm_name) - cd->clkdm = _clkdm_lookup(cd->clkdm_name); - - if (!cd->clkdm) { - WARN(!cd->clkdm, "clockdomain: %s: sleepdep clkdm %s " - "not found\n", clkdm->name, cd->clkdm_name); - continue; - } - - v = prm_read_mod_bits_shift(clkdm->pwrdm.ptr->prcm_offs, - OMAP3430_CM_SLEEPDEP, - (1 << cd->clkdm->dep_bit)); - - if (v) - pr_debug("clockdomain: %s: sleep dependency already " - "set to prevent from idling until %s " - "idles\n", clkdm->name, cd->clkdm->name); - - atomic_set(&cd->sleepdep_usecount, (v) ? 1 : 0); - } -}; - /* Public functions */ /** @@ -379,12 +288,17 @@ void clkdm_init(struct clockdomain **clkdms, _autodep_lookup(autodep); /* - * Ensure that the *dep_usecount registers reflect the current - * state of the PRCM. + * Put all clockdomains into software-supervised mode; PM code + * should later enable hardware-supervised mode as appropriate */ list_for_each_entry(clkdm, &clkdm_list, node) { - _init_wkdep_usecount(clkdm); - _init_sleepdep_usecount(clkdm); + if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP) + omap2_clkdm_wakeup(clkdm); + else if (clkdm->flags & CLKDM_CAN_DISABLE_AUTO) + omap2_clkdm_deny_idle(clkdm); + + clkdm_clear_all_wkdeps(clkdm); + clkdm_clear_all_sleepdeps(clkdm); } } @@ -592,6 +506,9 @@ int clkdm_clear_all_wkdeps(struct clockdomain *clkdm) if (!omap_chip_is(cd->omap_chip)) continue; + if (!cd->clkdm && cd->clkdm_name) + cd->clkdm = _clkdm_lookup(cd->clkdm_name); + /* PRM accesses are slow, so minimize them */ mask |= 1 << cd->clkdm->dep_bit; atomic_set(&cd->wkdep_usecount, 0); @@ -752,6 +669,9 @@ int clkdm_clear_all_sleepdeps(struct clockdomain *clkdm) if (!omap_chip_is(cd->omap_chip)) continue; + if (!cd->clkdm && cd->clkdm_name) + cd->clkdm = _clkdm_lookup(cd->clkdm_name); + /* PRM accesses are slow, so minimize them */ mask |= 1 << cd->clkdm->dep_bit; atomic_set(&cd->sleepdep_usecount, 0); diff --git a/arch/arm/mach-omap2/cm4xxx.c b/arch/arm/mach-omap2/cm4xxx.c index b101091e95d..f8a660a1a4a 100644 --- a/arch/arm/mach-omap2/cm4xxx.c +++ b/arch/arm/mach-omap2/cm4xxx.c @@ -43,7 +43,6 @@ * using separate functional clock * 0x3 disabled: Module is disabled and cannot be accessed * - * TODO: Need to handle module accessible in idle state */ int omap4_cm_wait_module_ready(void __iomem *clkctrl_reg) { @@ -52,9 +51,11 @@ int omap4_cm_wait_module_ready(void __iomem *clkctrl_reg) if (!clkctrl_reg) return 0; - omap_test_timeout(((__raw_readl(clkctrl_reg) & - OMAP4430_IDLEST_MASK) == 0), - MAX_MODULE_READY_TIME, i); + omap_test_timeout(( + ((__raw_readl(clkctrl_reg) & OMAP4430_IDLEST_MASK) == 0) || + (((__raw_readl(clkctrl_reg) & OMAP4430_IDLEST_MASK) >> + OMAP4430_IDLEST_SHIFT) == 0x2)), + MAX_MODULE_READY_TIME, i); return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY; } diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index 3d3d035db9a..8ea012ef0b5 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -60,7 +60,8 @@ struct omap3_processor_cx { struct omap3_processor_cx omap3_power_states[OMAP3_MAX_STATES]; struct omap3_processor_cx current_cx_state; -struct powerdomain *mpu_pd, *core_pd; +struct powerdomain *mpu_pd, *core_pd, *per_pd; +struct powerdomain *cam_pd; /* * The latencies/thresholds for various C states have @@ -233,14 +234,62 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev, struct cpuidle_state *state) { struct cpuidle_state *new_state = next_valid_state(dev, state); + u32 core_next_state, per_next_state = 0, per_saved_state = 0; + u32 cam_state; + struct omap3_processor_cx *cx; + int ret; if ((state->flags & CPUIDLE_FLAG_CHECK_BM) && omap3_idle_bm_check()) { BUG_ON(!dev->safe_state); new_state = dev->safe_state; + goto select_state; + } + + cx = cpuidle_get_statedata(state); + core_next_state = cx->core_state; + + /* + * FIXME: we currently manage device-specific idle states + * for PER and CORE in combination with CPU-specific + * idle states. This is wrong, and device-specific + * idle managment needs to be separated out into + * its own code. + */ + + /* + * Prevent idle completely if CAM is active. + * CAM does not have wakeup capability in OMAP3. + */ + cam_state = pwrdm_read_pwrst(cam_pd); + if (cam_state == PWRDM_POWER_ON) { + new_state = dev->safe_state; + goto select_state; + } + + /* + * Prevent PER off if CORE is not in retention or off as this + * would disable PER wakeups completely. + */ + per_next_state = per_saved_state = pwrdm_read_next_pwrst(per_pd); + if ((per_next_state == PWRDM_POWER_OFF) && + (core_next_state > PWRDM_POWER_RET)) { + per_next_state = PWRDM_POWER_RET; + pwrdm_set_next_pwrst(per_pd, per_next_state); } + /* Are we changing PER target state? */ + if (per_next_state != per_saved_state) + pwrdm_set_next_pwrst(per_pd, per_next_state); + +select_state: dev->last_state = new_state; - return omap3_enter_idle(dev, new_state); + ret = omap3_enter_idle(dev, new_state); + + /* Restore original PER state if it was modified */ + if (per_next_state != per_saved_state) + pwrdm_set_next_pwrst(per_pd, per_saved_state); + + return ret; } DEFINE_PER_CPU(struct cpuidle_device, omap3_idle_dev); @@ -328,7 +377,8 @@ void omap_init_power_states(void) cpuidle_params_table[OMAP3_STATE_C2].threshold; omap3_power_states[OMAP3_STATE_C2].mpu_state = PWRDM_POWER_ON; omap3_power_states[OMAP3_STATE_C2].core_state = PWRDM_POWER_ON; - omap3_power_states[OMAP3_STATE_C2].flags = CPUIDLE_FLAG_TIME_VALID; + omap3_power_states[OMAP3_STATE_C2].flags = CPUIDLE_FLAG_TIME_VALID | + CPUIDLE_FLAG_CHECK_BM; /* C3 . MPU CSWR + Core inactive */ omap3_power_states[OMAP3_STATE_C3].valid = @@ -426,6 +476,8 @@ int __init omap3_idle_init(void) mpu_pd = pwrdm_lookup("mpu_pwrdm"); core_pd = pwrdm_lookup("core_pwrdm"); + per_pd = pwrdm_lookup("per_pwrdm"); + cam_pd = pwrdm_lookup("cam_pwrdm"); omap_init_power_states(); cpuidle_register_driver(&omap3_idle_driver); diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 2dbb265bedd..9e5d51bee94 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -498,6 +498,76 @@ static void omap_init_sham(void) static inline void omap_init_sham(void) { } #endif +#if defined(CONFIG_CRYPTO_DEV_OMAP_AES) || defined(CONFIG_CRYPTO_DEV_OMAP_AES_MODULE) + +#ifdef CONFIG_ARCH_OMAP2 +static struct resource omap2_aes_resources[] = { + { + .start = OMAP24XX_SEC_AES_BASE, + .end = OMAP24XX_SEC_AES_BASE + 0x4C, + .flags = IORESOURCE_MEM, + }, + { + .start = OMAP24XX_DMA_AES_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = OMAP24XX_DMA_AES_RX, + .flags = IORESOURCE_DMA, + } +}; +static int omap2_aes_resources_sz = ARRAY_SIZE(omap2_aes_resources); +#else +#define omap2_aes_resources NULL +#define omap2_aes_resources_sz 0 +#endif + +#ifdef CONFIG_ARCH_OMAP3 +static struct resource omap3_aes_resources[] = { + { + .start = OMAP34XX_SEC_AES_BASE, + .end = OMAP34XX_SEC_AES_BASE + 0x4C, + .flags = IORESOURCE_MEM, + }, + { + .start = OMAP34XX_DMA_AES2_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = OMAP34XX_DMA_AES2_RX, + .flags = IORESOURCE_DMA, + } +}; +static int omap3_aes_resources_sz = ARRAY_SIZE(omap3_aes_resources); +#else +#define omap3_aes_resources NULL +#define omap3_aes_resources_sz 0 +#endif + +static struct platform_device aes_device = { + .name = "omap-aes", + .id = -1, +}; + +static void omap_init_aes(void) +{ + if (cpu_is_omap24xx()) { + aes_device.resource = omap2_aes_resources; + aes_device.num_resources = omap2_aes_resources_sz; + } else if (cpu_is_omap34xx()) { + aes_device.resource = omap3_aes_resources; + aes_device.num_resources = omap3_aes_resources_sz; + } else { + pr_err("%s: platform not supported\n", __func__); + return; + } + platform_device_register(&aes_device); +} + +#else +static inline void omap_init_aes(void) { } +#endif + /*-------------------------------------------------------------------------*/ #if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) @@ -624,7 +694,7 @@ static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller, omap_mux_init_signal("sdmmc_dat0", 0); omap_mux_init_signal("sdmmc_dat_dir0", 0); omap_mux_init_signal("sdmmc_cmd_dir", 0); - if (mmc_controller->slots[0].wires == 4) { + if (mmc_controller->slots[0].caps & MMC_CAP_4_BIT_DATA) { omap_mux_init_signal("sdmmc_dat1", 0); omap_mux_init_signal("sdmmc_dat2", 0); omap_mux_init_signal("sdmmc_dat3", 0); @@ -652,8 +722,8 @@ static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller, OMAP_PIN_INPUT_PULLUP); omap_mux_init_signal("sdmmc1_dat0", OMAP_PIN_INPUT_PULLUP); - if (mmc_controller->slots[0].wires == 4 || - mmc_controller->slots[0].wires == 8) { + if (mmc_controller->slots[0].caps & + (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)) { omap_mux_init_signal("sdmmc1_dat1", OMAP_PIN_INPUT_PULLUP); omap_mux_init_signal("sdmmc1_dat2", @@ -661,7 +731,8 @@ static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller, omap_mux_init_signal("sdmmc1_dat3", OMAP_PIN_INPUT_PULLUP); } - if (mmc_controller->slots[0].wires == 8) { + if (mmc_controller->slots[0].caps & + MMC_CAP_8_BIT_DATA) { omap_mux_init_signal("sdmmc1_dat4", OMAP_PIN_INPUT_PULLUP); omap_mux_init_signal("sdmmc1_dat5", @@ -685,8 +756,8 @@ static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller, * For 8 wire configurations, Lines DAT4, 5, 6 and 7 need to be muxed * in the board-*.c files */ - if (mmc_controller->slots[0].wires == 4 || - mmc_controller->slots[0].wires == 8) { + if (mmc_controller->slots[0].caps & + (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)) { omap_mux_init_signal("sdmmc2_dat1", OMAP_PIN_INPUT_PULLUP); omap_mux_init_signal("sdmmc2_dat2", @@ -694,7 +765,8 @@ static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller, omap_mux_init_signal("sdmmc2_dat3", OMAP_PIN_INPUT_PULLUP); } - if (mmc_controller->slots[0].wires == 8) { + if (mmc_controller->slots[0].caps & + MMC_CAP_8_BIT_DATA) { omap_mux_init_signal("sdmmc2_dat4.sdmmc2_dat4", OMAP_PIN_INPUT_PULLUP); omap_mux_init_signal("sdmmc2_dat5.sdmmc2_dat5", @@ -854,6 +926,7 @@ static int __init omap2_init_devices(void) omap_hdq_init(); omap_init_sti(); omap_init_sham(); + omap_init_aes(); omap_init_vout(); return 0; diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index 87bdb7bfd1b..eb92b8107d2 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -263,7 +263,7 @@ void __init omap2_hsmmc_init(struct omap2_hsmmc_info *controllers) "mmc%islot%i", c->mmc, 1); mmc->slots[0].name = hc->name; mmc->nr_slots = 1; - mmc->slots[0].wires = c->wires; + mmc->slots[0].caps = c->caps; mmc->slots[0].internal_clock = !c->ext_clock; mmc->dma_mask = 0xffffffff; @@ -321,16 +321,20 @@ void __init omap2_hsmmc_init(struct omap2_hsmmc_info *controllers) } /* Omap3630 HSMMC1 supports only 4-bit */ - if (cpu_is_omap3630() && c->wires > 4) { - c->wires = 4; - mmc->slots[0].wires = c->wires; + if (cpu_is_omap3630() && + (c->caps & MMC_CAP_8_BIT_DATA)) { + c->caps &= ~MMC_CAP_8_BIT_DATA; + c->caps |= MMC_CAP_4_BIT_DATA; + mmc->slots[0].caps = c->caps; } break; case 2: if (c->ext_clock) c->transceiver = 1; - if (c->transceiver && c->wires > 4) - c->wires = 4; + if (c->transceiver && (c->caps & MMC_CAP_8_BIT_DATA)) { + c->caps &= ~MMC_CAP_8_BIT_DATA; + c->caps |= MMC_CAP_4_BIT_DATA; + } /* FALLTHROUGH */ case 3: if (mmc->slots[0].features & HSMMC_HAS_PBIAS) { diff --git a/arch/arm/mach-omap2/hsmmc.h b/arch/arm/mach-omap2/hsmmc.h index 1fe6f018717..281e97287ad 100644 --- a/arch/arm/mach-omap2/hsmmc.h +++ b/arch/arm/mach-omap2/hsmmc.h @@ -10,7 +10,8 @@ struct mmc_card; struct omap2_hsmmc_info { u8 mmc; /* controller 1/2/3 */ - u8 wires; /* 1/4/8 wires */ + u32 caps; /* 4/8 wires and any additional host + * capabilities OR'd (ref. linux/mmc/host.h) */ bool transceiver; /* MMC-2 option */ bool ext_clock; /* use external pin for input clock */ bool cover_only; /* No card detect - just cover switch */ diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 4808bc968ac..0412233da2b 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -298,7 +298,6 @@ static void __init omap4_check_revision(void) u32 idcode; u16 hawkeye; u8 rev; - char *rev_name = "ES1.0"; /* * The IC rev detection is done with hawkeye and rev. @@ -309,14 +308,39 @@ static void __init omap4_check_revision(void) hawkeye = (idcode >> 12) & 0xffff; rev = (idcode >> 28) & 0xff; - if ((hawkeye == 0xb852) && (rev == 0x0)) { - omap_revision = OMAP4430_REV_ES1_0; - omap_chip.oc |= CHIP_IS_OMAP4430ES1; - pr_info("OMAP%04x %s\n", omap_rev() >> 16, rev_name); - return; + /* + * Few initial ES2.0 samples IDCODE is same as ES1.0 + * Use ARM register to detect the correct ES version + */ + if (!rev) { + idcode = read_cpuid(CPUID_ID); + rev = (idcode & 0xf) - 1; + } + + switch (hawkeye) { + case 0xb852: + switch (rev) { + case 0: + omap_revision = OMAP4430_REV_ES1_0; + omap_chip.oc |= CHIP_IS_OMAP4430ES1; + break; + case 1: + omap_revision = OMAP4430_REV_ES2_0; + omap_chip.oc |= CHIP_IS_OMAP4430ES2; + break; + default: + omap_revision = OMAP4430_REV_ES2_0; + omap_chip.oc |= CHIP_IS_OMAP4430ES2; + } + break; + default: + /* Unknown default to latest silicon rev as default*/ + omap_revision = OMAP4430_REV_ES2_0; + omap_chip.oc |= CHIP_IS_OMAP4430ES2; } - pr_err("Unknown OMAP4 CPU id\n"); + pr_info("OMAP%04x ES%d.0\n", + omap_rev() >> 16, ((omap_rev() >> 12) & 0xf) + 1); } #define OMAP3_SHOW_FEATURE(feat) \ diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index b9ea70bce56..490d87082fa 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -323,6 +323,9 @@ void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0, omap2430_hwmod_init(); else if (cpu_is_omap34xx()) omap3xxx_hwmod_init(); + else if (cpu_is_omap44xx()) + omap44xx_hwmod_init(); + /* The OPP tables have to be registered before a clk init */ omap_pm_if_early_init(mpu_opps, dsp_opps, l3_opps); @@ -342,9 +345,7 @@ void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0, #ifndef CONFIG_PM_RUNTIME skip_setup_idle = 1; #endif - if (cpu_is_omap24xx() || cpu_is_omap34xx()) /* FIXME: OMAP4 */ - omap_hwmod_late_init(skip_setup_idle); - + omap_hwmod_late_init(skip_setup_idle); if (cpu_is_omap24xx() || cpu_is_omap34xx()) { omap2_sdrc_init(sdrc_cs0, sdrc_cs1); _omap2_init_reprogram_sdrc(); diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index 467aae24578..88b8790e4fe 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -23,29 +23,6 @@ #include <plat/cpu.h> #include <plat/mcbsp.h> -#include "mux.h" - -static void omap2_mcbsp2_mux_setup(void) -{ - omap_mux_init_signal("eac_ac_sclk.mcbsp2_clkx", OMAP_PULL_ENA); - omap_mux_init_signal("eac_ac_fs.mcbsp2_fsx", OMAP_PULL_ENA); - omap_mux_init_signal("eac_ac_din.mcbsp2_dr", OMAP_PULL_ENA); - omap_mux_init_signal("eac_ac_dout.mcbsp2_dx", OMAP_PULL_ENA); - omap_mux_init_gpio(117, OMAP_PULL_ENA); - /* - * TODO: Need to add MUX settings for OMAP 2430 SDP - */ -} - -static void omap2_mcbsp_request(unsigned int id) -{ - if (cpu_is_omap2420() && (id == OMAP_MCBSP2)) - omap2_mcbsp2_mux_setup(); -} - -static struct omap_mcbsp_ops omap2_mcbsp_ops = { - .request = omap2_mcbsp_request, -}; #ifdef CONFIG_ARCH_OMAP2420 static struct omap_mcbsp_platform_data omap2420_mcbsp_pdata[] = { @@ -55,7 +32,6 @@ static struct omap_mcbsp_platform_data omap2420_mcbsp_pdata[] = { .dma_tx_sync = OMAP24XX_DMA_MCBSP1_TX, .rx_irq = INT_24XX_MCBSP1_IRQ_RX, .tx_irq = INT_24XX_MCBSP1_IRQ_TX, - .ops = &omap2_mcbsp_ops, }, { .phys_base = OMAP24XX_MCBSP2_BASE, @@ -63,7 +39,6 @@ static struct omap_mcbsp_platform_data omap2420_mcbsp_pdata[] = { .dma_tx_sync = OMAP24XX_DMA_MCBSP2_TX, .rx_irq = INT_24XX_MCBSP2_IRQ_RX, .tx_irq = INT_24XX_MCBSP2_IRQ_TX, - .ops = &omap2_mcbsp_ops, }, }; #define OMAP2420_MCBSP_PDATA_SZ ARRAY_SIZE(omap2420_mcbsp_pdata) @@ -82,7 +57,6 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = { .dma_tx_sync = OMAP24XX_DMA_MCBSP1_TX, .rx_irq = INT_24XX_MCBSP1_IRQ_RX, .tx_irq = INT_24XX_MCBSP1_IRQ_TX, - .ops = &omap2_mcbsp_ops, }, { .phys_base = OMAP24XX_MCBSP2_BASE, @@ -90,7 +64,6 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = { .dma_tx_sync = OMAP24XX_DMA_MCBSP2_TX, .rx_irq = INT_24XX_MCBSP2_IRQ_RX, .tx_irq = INT_24XX_MCBSP2_IRQ_TX, - .ops = &omap2_mcbsp_ops, }, { .phys_base = OMAP2430_MCBSP3_BASE, @@ -98,7 +71,6 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = { .dma_tx_sync = OMAP24XX_DMA_MCBSP3_TX, .rx_irq = INT_24XX_MCBSP3_IRQ_RX, .tx_irq = INT_24XX_MCBSP3_IRQ_TX, - .ops = &omap2_mcbsp_ops, }, { .phys_base = OMAP2430_MCBSP4_BASE, @@ -106,7 +78,6 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = { .dma_tx_sync = OMAP24XX_DMA_MCBSP4_TX, .rx_irq = INT_24XX_MCBSP4_IRQ_RX, .tx_irq = INT_24XX_MCBSP4_IRQ_TX, - .ops = &omap2_mcbsp_ops, }, { .phys_base = OMAP2430_MCBSP5_BASE, @@ -114,7 +85,6 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = { .dma_tx_sync = OMAP24XX_DMA_MCBSP5_TX, .rx_irq = INT_24XX_MCBSP5_IRQ_RX, .tx_irq = INT_24XX_MCBSP5_IRQ_TX, - .ops = &omap2_mcbsp_ops, }, }; #define OMAP2430_MCBSP_PDATA_SZ ARRAY_SIZE(omap2430_mcbsp_pdata) @@ -133,7 +103,6 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { .dma_tx_sync = OMAP24XX_DMA_MCBSP1_TX, .rx_irq = INT_24XX_MCBSP1_IRQ_RX, .tx_irq = INT_24XX_MCBSP1_IRQ_TX, - .ops = &omap2_mcbsp_ops, .buffer_size = 0x80, /* The FIFO has 128 locations */ }, { @@ -143,7 +112,6 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { .dma_tx_sync = OMAP24XX_DMA_MCBSP2_TX, .rx_irq = INT_24XX_MCBSP2_IRQ_RX, .tx_irq = INT_24XX_MCBSP2_IRQ_TX, - .ops = &omap2_mcbsp_ops, .buffer_size = 0x500, /* The FIFO has 1024 + 256 locations */ }, { @@ -153,7 +121,6 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { .dma_tx_sync = OMAP24XX_DMA_MCBSP3_TX, .rx_irq = INT_24XX_MCBSP3_IRQ_RX, .tx_irq = INT_24XX_MCBSP3_IRQ_TX, - .ops = &omap2_mcbsp_ops, .buffer_size = 0x80, /* The FIFO has 128 locations */ }, { @@ -162,7 +129,6 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { .dma_tx_sync = OMAP24XX_DMA_MCBSP4_TX, .rx_irq = INT_24XX_MCBSP4_IRQ_RX, .tx_irq = INT_24XX_MCBSP4_IRQ_TX, - .ops = &omap2_mcbsp_ops, .buffer_size = 0x80, /* The FIFO has 128 locations */ }, { @@ -171,7 +137,6 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { .dma_tx_sync = OMAP24XX_DMA_MCBSP5_TX, .rx_irq = INT_24XX_MCBSP5_IRQ_RX, .tx_irq = INT_24XX_MCBSP5_IRQ_TX, - .ops = &omap2_mcbsp_ops, .buffer_size = 0x80, /* The FIFO has 128 locations */ }, }; @@ -189,28 +154,24 @@ static struct omap_mcbsp_platform_data omap44xx_mcbsp_pdata[] = { .dma_rx_sync = OMAP44XX_DMA_MCBSP1_RX, .dma_tx_sync = OMAP44XX_DMA_MCBSP1_TX, .tx_irq = OMAP44XX_IRQ_MCBSP1, - .ops = &omap2_mcbsp_ops, }, { .phys_base = OMAP44XX_MCBSP2_BASE, .dma_rx_sync = OMAP44XX_DMA_MCBSP2_RX, .dma_tx_sync = OMAP44XX_DMA_MCBSP2_TX, .tx_irq = OMAP44XX_IRQ_MCBSP2, - .ops = &omap2_mcbsp_ops, }, { .phys_base = OMAP44XX_MCBSP3_BASE, .dma_rx_sync = OMAP44XX_DMA_MCBSP3_RX, .dma_tx_sync = OMAP44XX_DMA_MCBSP3_TX, .tx_irq = OMAP44XX_IRQ_MCBSP3, - .ops = &omap2_mcbsp_ops, }, { .phys_base = OMAP44XX_MCBSP4_BASE, .dma_rx_sync = OMAP44XX_DMA_MCBSP4_RX, .dma_tx_sync = OMAP44XX_DMA_MCBSP4_TX, .tx_irq = OMAP44XX_IRQ_MCBSP4, - .ops = &omap2_mcbsp_ops, }, }; #define OMAP44XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap44xx_mcbsp_pdata) diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index ab403b2ed26..6c2f8f0c0ed 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -87,7 +87,7 @@ static char *omap_mux_options; int __init omap_mux_init_gpio(int gpio, int val) { struct omap_mux_entry *e; - struct omap_mux *gpio_mux; + struct omap_mux *gpio_mux = NULL; u16 old_mode; u16 mux_mode; int found = 0; diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index 13dc9794dcc..923f9f5f91c 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -61,10 +61,14 @@ static int __init omap_l2_cache_init(void) omap_smc1(0x102, 0x1); /* - * 32KB way size, 16-way associativity, - * parity disabled + * 16-way associativity, parity disabled + * Way size - 32KB (es1.0) + * Way size - 64KB (es2.0 +) */ - l2x0_init(l2cache_base, 0x0e050000, 0xc0000fff); + if (omap_rev() == OMAP4430_REV_ES1_0) + l2x0_init(l2cache_base, 0x0e050000, 0xc0000fff); + else + l2x0_init(l2cache_base, 0x0e070000, 0xc0000fff); return 0; } diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index cb911d7d1a3..955861acc0c 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -13,10 +13,102 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * - * This code manages "OMAP modules" (on-chip devices) and their - * integration with Linux device driver and bus code. - * - * References: + * Introduction + * ------------ + * One way to view an OMAP SoC is as a collection of largely unrelated + * IP blocks connected by interconnects. The IP blocks include + * devices such as ARM processors, audio serial interfaces, UARTs, + * etc. Some of these devices, like the DSP, are created by TI; + * others, like the SGX, largely originate from external vendors. In + * TI's documentation, on-chip devices are referred to as "OMAP + * modules." Some of these IP blocks are identical across several + * OMAP versions. Others are revised frequently. + * + * These OMAP modules are tied together by various interconnects. + * Most of the address and data flow between modules is via OCP-based + * interconnects such as the L3 and L4 buses; but there are other + * interconnects that distribute the hardware clock tree, handle idle + * and reset signaling, supply power, and connect the modules to + * various pads or balls on the OMAP package. + * + * OMAP hwmod provides a consistent way to describe the on-chip + * hardware blocks and their integration into the rest of the chip. + * This description can be automatically generated from the TI + * hardware database. OMAP hwmod provides a standard, consistent API + * to reset, enable, idle, and disable these hardware blocks. And + * hwmod provides a way for other core code, such as the Linux device + * code or the OMAP power management and address space mapping code, + * to query the hardware database. + * + * Using hwmod + * ----------- + * Drivers won't call hwmod functions directly. That is done by the + * omap_device code, and in rare occasions, by custom integration code + * in arch/arm/ *omap*. The omap_device code includes functions to + * build a struct platform_device using omap_hwmod data, and that is + * currently how hwmod data is communicated to drivers and to the + * Linux driver model. Most drivers will call omap_hwmod functions only + * indirectly, via pm_runtime*() functions. + * + * From a layering perspective, here is where the OMAP hwmod code + * fits into the kernel software stack: + * + * +-------------------------------+ + * | Device driver code | + * | (e.g., drivers/) | + * +-------------------------------+ + * | Linux driver model | + * | (platform_device / | + * | platform_driver data/code) | + * +-------------------------------+ + * | OMAP core-driver integration | + * |(arch/arm/mach-omap2/devices.c)| + * +-------------------------------+ + * | omap_device code | + * | (../plat-omap/omap_device.c) | + * +-------------------------------+ + * ----> | omap_hwmod code/data | <----- + * | (../mach-omap2/omap_hwmod*) | + * +-------------------------------+ + * | OMAP clock/PRCM/register fns | + * | (__raw_{read,write}l, clk*) | + * +-------------------------------+ + * + * Device drivers should not contain any OMAP-specific code or data in + * them. They should only contain code to operate the IP block that + * the driver is responsible for. This is because these IP blocks can + * also appear in other SoCs, either from TI (such as DaVinci) or from + * other manufacturers; and drivers should be reusable across other + * platforms. + * + * The OMAP hwmod code also will attempt to reset and idle all on-chip + * devices upon boot. The goal here is for the kernel to be + * completely self-reliant and independent from bootloaders. This is + * to ensure a repeatable configuration, both to ensure consistent + * runtime behavior, and to make it easier for others to reproduce + * bugs. + * + * OMAP module activity states + * --------------------------- + * The hwmod code considers modules to be in one of several activity + * states. IP blocks start out in an UNKNOWN state, then once they + * are registered via the hwmod code, proceed to the REGISTERED state. + * Once their clock names are resolved to clock pointers, the module + * enters the CLKS_INITED state; and finally, once the module has been + * reset and the integration registers programmed, the INITIALIZED state + * is entered. The hwmod code will then place the module into either + * the IDLE state to save power, or in the case of a critical system + * module, the ENABLED state. + * + * OMAP core integration code can then call omap_hwmod*() functions + * directly to move the module between the IDLE, ENABLED, and DISABLED + * states, as needed. This is done during both the PM idle loop, and + * in the OMAP core integration code's implementation of the PM runtime + * functions. + * + * References + * ---------- + * This is a partial list. * - OMAP2420 Multimedia Processor Silicon Revision 2.1.1, 2.2 (SWPU064) * - OMAP2430 Multimedia Device POP Silicon Revision 2.1 (SWPU090) * - OMAP34xx Multimedia Device Silicon Revision 3.1 (SWPU108) @@ -50,11 +142,13 @@ #include <plat/powerdomain.h> #include <plat/clock.h> #include <plat/omap_hwmod.h> +#include <plat/prcm.h> #include "cm.h" +#include "prm.h" -/* Maximum microseconds to wait for OMAP module to reset */ -#define MAX_MODULE_RESET_WAIT 10000 +/* Maximum microseconds to wait for OMAP module to softreset */ +#define MAX_MODULE_SOFTRESET_WAIT 10000 /* Name of the OMAP hwmod for the MPU */ #define MPU_INITIATOR_NAME "mpu" @@ -544,6 +638,36 @@ static int _disable_clocks(struct omap_hwmod *oh) return 0; } +static void _enable_optional_clocks(struct omap_hwmod *oh) +{ + struct omap_hwmod_opt_clk *oc; + int i; + + pr_debug("omap_hwmod: %s: enabling optional clocks\n", oh->name); + + for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++) + if (oc->_clk) { + pr_debug("omap_hwmod: enable %s:%s\n", oc->role, + oc->_clk->name); + clk_enable(oc->_clk); + } +} + +static void _disable_optional_clocks(struct omap_hwmod *oh) +{ + struct omap_hwmod_opt_clk *oc; + int i; + + pr_debug("omap_hwmod: %s: disabling optional clocks\n", oh->name); + + for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++) + if (oc->_clk) { + pr_debug("omap_hwmod: disable %s:%s\n", oc->role, + oc->_clk->name); + clk_disable(oc->_clk); + } +} + /** * _find_mpu_port_index - find hwmod OCP slave port ID intended for MPU use * @oh: struct omap_hwmod * @@ -622,7 +746,7 @@ static void __iomem *_find_mpu_rt_base(struct omap_hwmod *oh, u8 index) } /** - * _sysc_enable - try to bring a module out of idle via OCP_SYSCONFIG + * _enable_sysc - try to bring a module out of idle via OCP_SYSCONFIG * @oh: struct omap_hwmod * * * If module is marked as SWSUP_SIDLE, force the module out of slave @@ -630,7 +754,7 @@ static void __iomem *_find_mpu_rt_base(struct omap_hwmod *oh, u8 index) * as SWSUP_MSUSPEND, force the module out of master standby; * otherwise, configure it for smart-standby. No return value. */ -static void _sysc_enable(struct omap_hwmod *oh) +static void _enable_sysc(struct omap_hwmod *oh) { u8 idlemode, sf; u32 v; @@ -653,14 +777,6 @@ static void _sysc_enable(struct omap_hwmod *oh) _set_master_standbymode(oh, idlemode, &v); } - if (sf & SYSC_HAS_AUTOIDLE) { - idlemode = (oh->flags & HWMOD_NO_OCP_AUTOIDLE) ? - 0 : 1; - _set_module_autoidle(oh, idlemode, &v); - } - - /* XXX OCP ENAWAKEUP bit? */ - /* * XXX The clock framework should handle this, by * calling into this code. But this must wait until the @@ -671,10 +787,25 @@ static void _sysc_enable(struct omap_hwmod *oh) _set_clockactivity(oh, oh->class->sysc->clockact, &v); _write_sysconfig(v, oh); + + /* If slave is in SMARTIDLE, also enable wakeup */ + if ((sf & SYSC_HAS_SIDLEMODE) && !(oh->flags & HWMOD_SWSUP_SIDLE)) + _enable_wakeup(oh); + + /* + * Set the autoidle bit only after setting the smartidle bit + * Setting this will not have any impact on the other modules. + */ + if (sf & SYSC_HAS_AUTOIDLE) { + idlemode = (oh->flags & HWMOD_NO_OCP_AUTOIDLE) ? + 0 : 1; + _set_module_autoidle(oh, idlemode, &v); + _write_sysconfig(v, oh); + } } /** - * _sysc_idle - try to put a module into idle via OCP_SYSCONFIG + * _idle_sysc - try to put a module into idle via OCP_SYSCONFIG * @oh: struct omap_hwmod * * * If module is marked as SWSUP_SIDLE, force the module into slave @@ -682,7 +813,7 @@ static void _sysc_enable(struct omap_hwmod *oh) * as SWSUP_MSUSPEND, force the module into master standby; otherwise, * configure it for smart-standby. No return value. */ -static void _sysc_idle(struct omap_hwmod *oh) +static void _idle_sysc(struct omap_hwmod *oh) { u8 idlemode, sf; u32 v; @@ -709,13 +840,13 @@ static void _sysc_idle(struct omap_hwmod *oh) } /** - * _sysc_shutdown - force a module into idle via OCP_SYSCONFIG + * _shutdown_sysc - force a module into idle via OCP_SYSCONFIG * @oh: struct omap_hwmod * * * Force the module into slave idle and master suspend. No return * value. */ -static void _sysc_shutdown(struct omap_hwmod *oh) +static void _shutdown_sysc(struct omap_hwmod *oh) { u32 v; u8 sf; @@ -767,10 +898,10 @@ static struct omap_hwmod *_lookup(const char *name) * @data: not used; pass NULL * * Called by omap_hwmod_late_init() (after omap2_clk_init()). - * Resolves all clock names embedded in the hwmod. Must be called - * with omap_hwmod_mutex held. Returns -EINVAL if the omap_hwmod - * has not yet been registered or if the clocks have already been - * initialized, 0 on success, or a non-zero error on failure. + * Resolves all clock names embedded in the hwmod. Returns -EINVAL if + * the omap_hwmod has not yet been registered or if the clocks have + * already been initialized, 0 on success, or a non-zero error on + * failure. */ static int _init_clocks(struct omap_hwmod *oh, void *data) { @@ -834,56 +965,202 @@ static int _wait_target_ready(struct omap_hwmod *oh) } /** + * _lookup_hardreset - return the register bit shift for this hwmod/reset line + * @oh: struct omap_hwmod * + * @name: name of the reset line in the context of this hwmod + * + * Return the bit position of the reset line that match the + * input name. Return -ENOENT if not found. + */ +static u8 _lookup_hardreset(struct omap_hwmod *oh, const char *name) +{ + int i; + + for (i = 0; i < oh->rst_lines_cnt; i++) { + const char *rst_line = oh->rst_lines[i].name; + if (!strcmp(rst_line, name)) { + u8 shift = oh->rst_lines[i].rst_shift; + pr_debug("omap_hwmod: %s: _lookup_hardreset: %s: %d\n", + oh->name, rst_line, shift); + + return shift; + } + } + + return -ENOENT; +} + +/** + * _assert_hardreset - assert the HW reset line of submodules + * contained in the hwmod module. + * @oh: struct omap_hwmod * + * @name: name of the reset line to lookup and assert + * + * Some IP like dsp, ipu or iva contain processor that require + * an HW reset line to be assert / deassert in order to enable fully + * the IP. + */ +static int _assert_hardreset(struct omap_hwmod *oh, const char *name) +{ + u8 shift; + + if (!oh) + return -EINVAL; + + shift = _lookup_hardreset(oh, name); + if (IS_ERR_VALUE(shift)) + return shift; + + if (cpu_is_omap24xx() || cpu_is_omap34xx()) + return omap2_prm_assert_hardreset(oh->prcm.omap2.module_offs, + shift); + else if (cpu_is_omap44xx()) + return omap4_prm_assert_hardreset(oh->prcm.omap4.rstctrl_reg, + shift); + else + return -EINVAL; +} + +/** + * _deassert_hardreset - deassert the HW reset line of submodules contained + * in the hwmod module. + * @oh: struct omap_hwmod * + * @name: name of the reset line to look up and deassert + * + * Some IP like dsp, ipu or iva contain processor that require + * an HW reset line to be assert / deassert in order to enable fully + * the IP. + */ +static int _deassert_hardreset(struct omap_hwmod *oh, const char *name) +{ + u8 shift; + int r; + + if (!oh) + return -EINVAL; + + shift = _lookup_hardreset(oh, name); + if (IS_ERR_VALUE(shift)) + return shift; + + if (cpu_is_omap24xx() || cpu_is_omap34xx()) + r = omap2_prm_deassert_hardreset(oh->prcm.omap2.module_offs, + shift); + else if (cpu_is_omap44xx()) + r = omap4_prm_deassert_hardreset(oh->prcm.omap4.rstctrl_reg, + shift); + else + return -EINVAL; + + if (r == -EBUSY) + pr_warning("omap_hwmod: %s: failed to hardreset\n", oh->name); + + return r; +} + +/** + * _read_hardreset - read the HW reset line state of submodules + * contained in the hwmod module + * @oh: struct omap_hwmod * + * @name: name of the reset line to look up and read + * + * Return the state of the reset line. + */ +static int _read_hardreset(struct omap_hwmod *oh, const char *name) +{ + u8 shift; + + if (!oh) + return -EINVAL; + + shift = _lookup_hardreset(oh, name); + if (IS_ERR_VALUE(shift)) + return shift; + + if (cpu_is_omap24xx() || cpu_is_omap34xx()) { + return omap2_prm_is_hardreset_asserted(oh->prcm.omap2.module_offs, + shift); + } else if (cpu_is_omap44xx()) { + return omap4_prm_is_hardreset_asserted(oh->prcm.omap4.rstctrl_reg, + shift); + } else { + return -EINVAL; + } +} + +/** * _reset - reset an omap_hwmod * @oh: struct omap_hwmod * * * Resets an omap_hwmod @oh via the OCP_SYSCONFIG bit. hwmod must be - * enabled for this to work. Must be called with omap_hwmod_mutex - * held. Returns -EINVAL if the hwmod cannot be reset this way or if - * the hwmod is in the wrong state, -ETIMEDOUT if the module did not - * reset in time, or 0 upon success. + * enabled for this to work. Returns -EINVAL if the hwmod cannot be + * reset this way or if the hwmod is in the wrong state, -ETIMEDOUT if + * the module did not reset in time, or 0 upon success. + * + * In OMAP3 a specific SYSSTATUS register is used to get the reset status. + * Starting in OMAP4, some IPs does not have SYSSTATUS register and instead + * use the SYSCONFIG softreset bit to provide the status. + * + * Note that some IP like McBSP does have a reset control but no reset status. */ static int _reset(struct omap_hwmod *oh) { - u32 r, v; + u32 v; int c = 0; + int ret = 0; if (!oh->class->sysc || - !(oh->class->sysc->sysc_flags & SYSC_HAS_SOFTRESET) || - (oh->class->sysc->sysc_flags & SYSS_MISSING)) + !(oh->class->sysc->sysc_flags & SYSC_HAS_SOFTRESET)) return -EINVAL; /* clocks must be on for this operation */ if (oh->_state != _HWMOD_STATE_ENABLED) { - WARN(1, "omap_hwmod: %s: reset can only be entered from " - "enabled state\n", oh->name); + pr_warning("omap_hwmod: %s: reset can only be entered from " + "enabled state\n", oh->name); return -EINVAL; } + /* For some modules, all optionnal clocks need to be enabled as well */ + if (oh->flags & HWMOD_CONTROL_OPT_CLKS_IN_RESET) + _enable_optional_clocks(oh); + pr_debug("omap_hwmod: %s: resetting\n", oh->name); v = oh->_sysc_cache; - r = _set_softreset(oh, &v); - if (r) - return r; + ret = _set_softreset(oh, &v); + if (ret) + goto dis_opt_clks; _write_sysconfig(v, oh); - omap_test_timeout((omap_hwmod_readl(oh, oh->class->sysc->syss_offs) & - SYSS_RESETDONE_MASK), - MAX_MODULE_RESET_WAIT, c); - - if (c == MAX_MODULE_RESET_WAIT) - WARN(1, "omap_hwmod: %s: failed to reset in %d usec\n", - oh->name, MAX_MODULE_RESET_WAIT); + if (oh->class->sysc->sysc_flags & SYSS_HAS_RESET_STATUS) + omap_test_timeout((omap_hwmod_readl(oh, + oh->class->sysc->syss_offs) + & SYSS_RESETDONE_MASK), + MAX_MODULE_SOFTRESET_WAIT, c); + else if (oh->class->sysc->sysc_flags & SYSC_HAS_RESET_STATUS) + omap_test_timeout(!(omap_hwmod_readl(oh, + oh->class->sysc->sysc_offs) + & SYSC_TYPE2_SOFTRESET_MASK), + MAX_MODULE_SOFTRESET_WAIT, c); + + if (c == MAX_MODULE_SOFTRESET_WAIT) + pr_warning("omap_hwmod: %s: softreset failed (waited %d usec)\n", + oh->name, MAX_MODULE_SOFTRESET_WAIT); else - pr_debug("omap_hwmod: %s: reset in %d usec\n", oh->name, c); + pr_debug("omap_hwmod: %s: softreset in %d usec\n", oh->name, c); /* * XXX add _HWMOD_STATE_WEDGED for modules that don't come back from * _wait_target_ready() or _reset() */ - return (c == MAX_MODULE_RESET_WAIT) ? -ETIMEDOUT : 0; + ret = (c == MAX_MODULE_SOFTRESET_WAIT) ? -ETIMEDOUT : 0; + +dis_opt_clks: + if (oh->flags & HWMOD_CONTROL_OPT_CLKS_IN_RESET) + _disable_optional_clocks(oh); + + return ret; } /** @@ -891,9 +1168,11 @@ static int _reset(struct omap_hwmod *oh) * @oh: struct omap_hwmod * * * Enables an omap_hwmod @oh such that the MPU can access the hwmod's - * register target. Must be called with omap_hwmod_mutex held. - * Returns -EINVAL if the hwmod is in the wrong state or passes along - * the return value of _wait_target_ready(). + * register target. (This function has a full name -- + * _omap_hwmod_enable() rather than simply _enable() -- because it is + * currently required by the pm34xx.c idle loop.) Returns -EINVAL if + * the hwmod is in the wrong state or passes along the return value of + * _wait_target_ready(). */ int _omap_hwmod_enable(struct omap_hwmod *oh) { @@ -909,6 +1188,15 @@ int _omap_hwmod_enable(struct omap_hwmod *oh) pr_debug("omap_hwmod: %s: enabling\n", oh->name); + /* + * If an IP contains only one HW reset line, then de-assert it in order + * to allow to enable the clocks. Otherwise the PRCM will return + * Intransition status, and the init will failed. + */ + if ((oh->_state == _HWMOD_STATE_INITIALIZED || + oh->_state == _HWMOD_STATE_DISABLED) && oh->rst_lines_cnt == 1) + _deassert_hardreset(oh, oh->rst_lines[0].name); + /* XXX mux balls */ _add_initiator_dep(oh, mpu_oh); @@ -922,7 +1210,7 @@ int _omap_hwmod_enable(struct omap_hwmod *oh) if (oh->class->sysc) { if (!(oh->_int_flags & _HWMOD_SYSCONFIG_LOADED)) _update_sysc_cache(oh); - _sysc_enable(oh); + _enable_sysc(oh); } } else { pr_debug("omap_hwmod: %s: _wait_target_ready: %d\n", @@ -933,12 +1221,14 @@ int _omap_hwmod_enable(struct omap_hwmod *oh) } /** - * _idle - idle an omap_hwmod + * _omap_hwmod_idle - idle an omap_hwmod * @oh: struct omap_hwmod * * * Idles an omap_hwmod @oh. This should be called once the hwmod has - * no further work. Returns -EINVAL if the hwmod is in the wrong - * state or returns 0. + * no further work. (This function has a full name -- + * _omap_hwmod_idle() rather than simply _idle() -- because it is + * currently required by the pm34xx.c idle loop.) Returns -EINVAL if + * the hwmod is in the wrong state or returns 0. */ int _omap_hwmod_idle(struct omap_hwmod *oh) { @@ -951,7 +1241,7 @@ int _omap_hwmod_idle(struct omap_hwmod *oh) pr_debug("omap_hwmod: %s: idling\n", oh->name); if (oh->class->sysc) - _sysc_idle(oh); + _idle_sysc(oh); _del_initiator_dep(oh, mpu_oh); _disable_clocks(oh); @@ -981,10 +1271,21 @@ static int _shutdown(struct omap_hwmod *oh) pr_debug("omap_hwmod: %s: disabling\n", oh->name); if (oh->class->sysc) - _sysc_shutdown(oh); - _del_initiator_dep(oh, mpu_oh); - /* XXX what about the other system initiators here? DMA, tesla, d2d */ - _disable_clocks(oh); + _shutdown_sysc(oh); + + /* + * If an IP contains only one HW reset line, then assert it + * before disabling the clocks and shutting down the IP. + */ + if (oh->rst_lines_cnt == 1) + _assert_hardreset(oh, oh->rst_lines[0].name); + + /* clocks and deps are already disabled in idle */ + if (oh->_state == _HWMOD_STATE_ENABLED) { + _del_initiator_dep(oh, mpu_oh); + /* XXX what about the other system initiators here? dma, dsp */ + _disable_clocks(oh); + } /* XXX Should this code also force-disable the optional clocks? */ /* XXX mux any associated balls to safe mode */ @@ -1000,11 +1301,10 @@ static int _shutdown(struct omap_hwmod *oh) * @skip_setup_idle_p: do not idle hwmods at the end of the fn if 1 * * Writes the CLOCKACTIVITY bits @clockact to the hwmod @oh - * OCP_SYSCONFIG register. Must be called with omap_hwmod_mutex held. - * @skip_setup_idle is intended to be used on a system that will not - * call omap_hwmod_enable() to enable devices (e.g., a system without - * PM runtime). Returns -EINVAL if the hwmod is in the wrong state or - * returns 0. + * OCP_SYSCONFIG register. @skip_setup_idle is intended to be used on + * a system that will not call omap_hwmod_enable() to enable devices + * (e.g., a system without PM runtime). Returns -EINVAL if the hwmod + * is in the wrong state or returns 0. */ static int _setup(struct omap_hwmod *oh, void *data) { @@ -1034,8 +1334,19 @@ static int _setup(struct omap_hwmod *oh, void *data) } } + mutex_init(&oh->_mutex); oh->_state = _HWMOD_STATE_INITIALIZED; + /* + * In the case of hwmod with hardreset that should not be + * de-assert at boot time, we have to keep the module + * initialized, because we cannot enable it properly with the + * reset asserted. Exit without warning because that behavior is + * expected. + */ + if ((oh->flags & HWMOD_INIT_NO_RESET) && oh->rst_lines_cnt == 1) + return 0; + r = _omap_hwmod_enable(oh); if (r) { pr_warning("omap_hwmod: %s: cannot be enabled (%d)\n", @@ -1044,16 +1355,16 @@ static int _setup(struct omap_hwmod *oh, void *data) } if (!(oh->flags & HWMOD_INIT_NO_RESET)) { + _reset(oh); + /* - * XXX Do the OCP_SYSCONFIG bits need to be - * reprogrammed after a reset? If not, then this can - * be removed. If they do, then probably the - * _omap_hwmod_enable() function should be split to avoid the - * rewrite of the OCP_SYSCONFIG register. + * OCP_SYSCONFIG bits need to be reprogrammed after a softreset. + * The _omap_hwmod_enable() function should be split to + * avoid the rewrite of the OCP_SYSCONFIG register. */ if (oh->class->sysc) { _update_sysc_cache(oh); - _sysc_enable(oh); + _enable_sysc(oh); } } @@ -1309,7 +1620,7 @@ int omap_hwmod_unregister(struct omap_hwmod *oh) * omap_hwmod_enable - enable an omap_hwmod * @oh: struct omap_hwmod * * - * Enable an omap_hwomd @oh. Intended to be called by omap_device_enable(). + * Enable an omap_hwmod @oh. Intended to be called by omap_device_enable(). * Returns -EINVAL on error or passes along the return value from _enable(). */ int omap_hwmod_enable(struct omap_hwmod *oh) @@ -1319,9 +1630,9 @@ int omap_hwmod_enable(struct omap_hwmod *oh) if (!oh) return -EINVAL; - mutex_lock(&omap_hwmod_mutex); + mutex_lock(&oh->_mutex); r = _omap_hwmod_enable(oh); - mutex_unlock(&omap_hwmod_mutex); + mutex_unlock(&oh->_mutex); return r; } @@ -1331,7 +1642,7 @@ int omap_hwmod_enable(struct omap_hwmod *oh) * omap_hwmod_idle - idle an omap_hwmod * @oh: struct omap_hwmod * * - * Idle an omap_hwomd @oh. Intended to be called by omap_device_idle(). + * Idle an omap_hwmod @oh. Intended to be called by omap_device_idle(). * Returns -EINVAL on error or passes along the return value from _idle(). */ int omap_hwmod_idle(struct omap_hwmod *oh) @@ -1339,9 +1650,9 @@ int omap_hwmod_idle(struct omap_hwmod *oh) if (!oh) return -EINVAL; - mutex_lock(&omap_hwmod_mutex); + mutex_lock(&oh->_mutex); _omap_hwmod_idle(oh); - mutex_unlock(&omap_hwmod_mutex); + mutex_unlock(&oh->_mutex); return 0; } @@ -1350,7 +1661,7 @@ int omap_hwmod_idle(struct omap_hwmod *oh) * omap_hwmod_shutdown - shutdown an omap_hwmod * @oh: struct omap_hwmod * * - * Shutdown an omap_hwomd @oh. Intended to be called by + * Shutdown an omap_hwmod @oh. Intended to be called by * omap_device_shutdown(). Returns -EINVAL on error or passes along * the return value from _shutdown(). */ @@ -1359,9 +1670,9 @@ int omap_hwmod_shutdown(struct omap_hwmod *oh) if (!oh) return -EINVAL; - mutex_lock(&omap_hwmod_mutex); + mutex_lock(&oh->_mutex); _shutdown(oh); - mutex_unlock(&omap_hwmod_mutex); + mutex_unlock(&oh->_mutex); return 0; } @@ -1374,9 +1685,9 @@ int omap_hwmod_shutdown(struct omap_hwmod *oh) */ int omap_hwmod_enable_clocks(struct omap_hwmod *oh) { - mutex_lock(&omap_hwmod_mutex); + mutex_lock(&oh->_mutex); _enable_clocks(oh); - mutex_unlock(&omap_hwmod_mutex); + mutex_unlock(&oh->_mutex); return 0; } @@ -1389,9 +1700,9 @@ int omap_hwmod_enable_clocks(struct omap_hwmod *oh) */ int omap_hwmod_disable_clocks(struct omap_hwmod *oh) { - mutex_lock(&omap_hwmod_mutex); + mutex_lock(&oh->_mutex); _disable_clocks(oh); - mutex_unlock(&omap_hwmod_mutex); + mutex_unlock(&oh->_mutex); return 0; } @@ -1430,20 +1741,18 @@ void omap_hwmod_ocp_barrier(struct omap_hwmod *oh) * * Under some conditions, a driver may wish to reset the entire device. * Called from omap_device code. Returns -EINVAL on error or passes along - * the return value from _reset()/_enable(). + * the return value from _reset(). */ int omap_hwmod_reset(struct omap_hwmod *oh) { int r; - if (!oh || !(oh->_state & _HWMOD_STATE_ENABLED)) + if (!oh) return -EINVAL; - mutex_lock(&omap_hwmod_mutex); + mutex_lock(&oh->_mutex); r = _reset(oh); - if (!r) - r = _omap_hwmod_enable(oh); - mutex_unlock(&omap_hwmod_mutex); + mutex_unlock(&oh->_mutex); return r; } @@ -1468,7 +1777,7 @@ int omap_hwmod_count_resources(struct omap_hwmod *oh) { int ret, i; - ret = oh->mpu_irqs_cnt + oh->sdma_chs_cnt; + ret = oh->mpu_irqs_cnt + oh->sdma_reqs_cnt; for (i = 0; i < oh->slaves_cnt; i++) ret += oh->slaves[i]->addr_cnt; @@ -1501,10 +1810,10 @@ int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res) r++; } - for (i = 0; i < oh->sdma_chs_cnt; i++) { - (res + r)->name = (oh->sdma_chs + i)->name; - (res + r)->start = (oh->sdma_chs + i)->dma_ch; - (res + r)->end = (oh->sdma_chs + i)->dma_ch; + for (i = 0; i < oh->sdma_reqs_cnt; i++) { + (res + r)->name = (oh->sdma_reqs + i)->name; + (res + r)->start = (oh->sdma_reqs + i)->dma_req; + (res + r)->end = (oh->sdma_reqs + i)->dma_req; (res + r)->flags = IORESOURCE_DMA; r++; } @@ -1644,9 +1953,9 @@ int omap_hwmod_enable_wakeup(struct omap_hwmod *oh) !(oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP)) return -EINVAL; - mutex_lock(&omap_hwmod_mutex); + mutex_lock(&oh->_mutex); _enable_wakeup(oh); - mutex_unlock(&omap_hwmod_mutex); + mutex_unlock(&oh->_mutex); return 0; } @@ -1669,14 +1978,92 @@ int omap_hwmod_disable_wakeup(struct omap_hwmod *oh) !(oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP)) return -EINVAL; - mutex_lock(&omap_hwmod_mutex); + mutex_lock(&oh->_mutex); _disable_wakeup(oh); - mutex_unlock(&omap_hwmod_mutex); + mutex_unlock(&oh->_mutex); return 0; } /** + * omap_hwmod_assert_hardreset - assert the HW reset line of submodules + * contained in the hwmod module. + * @oh: struct omap_hwmod * + * @name: name of the reset line to lookup and assert + * + * Some IP like dsp, ipu or iva contain processor that require + * an HW reset line to be assert / deassert in order to enable fully + * the IP. Returns -EINVAL if @oh is null or if the operation is not + * yet supported on this OMAP; otherwise, passes along the return value + * from _assert_hardreset(). + */ +int omap_hwmod_assert_hardreset(struct omap_hwmod *oh, const char *name) +{ + int ret; + + if (!oh) + return -EINVAL; + + mutex_lock(&oh->_mutex); + ret = _assert_hardreset(oh, name); + mutex_unlock(&oh->_mutex); + + return ret; +} + +/** + * omap_hwmod_deassert_hardreset - deassert the HW reset line of submodules + * contained in the hwmod module. + * @oh: struct omap_hwmod * + * @name: name of the reset line to look up and deassert + * + * Some IP like dsp, ipu or iva contain processor that require + * an HW reset line to be assert / deassert in order to enable fully + * the IP. Returns -EINVAL if @oh is null or if the operation is not + * yet supported on this OMAP; otherwise, passes along the return value + * from _deassert_hardreset(). + */ +int omap_hwmod_deassert_hardreset(struct omap_hwmod *oh, const char *name) +{ + int ret; + + if (!oh) + return -EINVAL; + + mutex_lock(&oh->_mutex); + ret = _deassert_hardreset(oh, name); + mutex_unlock(&oh->_mutex); + + return ret; +} + +/** + * omap_hwmod_read_hardreset - read the HW reset line state of submodules + * contained in the hwmod module + * @oh: struct omap_hwmod * + * @name: name of the reset line to look up and read + * + * Return the current state of the hwmod @oh's reset line named @name: + * returns -EINVAL upon parameter error or if this operation + * is unsupported on the current OMAP; otherwise, passes along the return + * value from _read_hardreset(). + */ +int omap_hwmod_read_hardreset(struct omap_hwmod *oh, const char *name) +{ + int ret; + + if (!oh) + return -EINVAL; + + mutex_lock(&oh->_mutex); + ret = _read_hardreset(oh, name); + mutex_unlock(&oh->_mutex); + + return ret; +} + + +/** * omap_hwmod_for_each_by_class - call @fn for each hwmod of class @classname * @classname: struct omap_hwmod_class name to search for * @fn: callback function pointer to call for each hwmod in class @classname diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c new file mode 100644 index 00000000000..e20b0eebc6d --- /dev/null +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -0,0 +1,482 @@ +/* + * Hardware modules present on the OMAP44xx chips + * + * Copyright (C) 2009-2010 Texas Instruments, Inc. + * Copyright (C) 2009-2010 Nokia Corporation + * + * Paul Walmsley + * Benoit Cousson + * + * This file is automatically generated from the OMAP hardware databases. + * We respectfully ask that any modifications to this file be coordinated + * with the public linux-omap@vger.kernel.org mailing list and the + * authors above to ensure that the autogeneration scripts are kept + * up-to-date with the file contents. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/io.h> + +#include <plat/omap_hwmod.h> +#include <plat/cpu.h> + +#include "omap_hwmod_common_data.h" + +#include "cm.h" +#include "prm-regbits-44xx.h" + +/* Base offset for all OMAP4 interrupts external to MPUSS */ +#define OMAP44XX_IRQ_GIC_START 32 + +/* Base offset for all OMAP4 dma requests */ +#define OMAP44XX_DMA_REQ_START 1 + +/* Backward references (IPs with Bus Master capability) */ +static struct omap_hwmod omap44xx_dmm_hwmod; +static struct omap_hwmod omap44xx_emif_fw_hwmod; +static struct omap_hwmod omap44xx_l3_instr_hwmod; +static struct omap_hwmod omap44xx_l3_main_1_hwmod; +static struct omap_hwmod omap44xx_l3_main_2_hwmod; +static struct omap_hwmod omap44xx_l3_main_3_hwmod; +static struct omap_hwmod omap44xx_l4_abe_hwmod; +static struct omap_hwmod omap44xx_l4_cfg_hwmod; +static struct omap_hwmod omap44xx_l4_per_hwmod; +static struct omap_hwmod omap44xx_l4_wkup_hwmod; +static struct omap_hwmod omap44xx_mpu_hwmod; +static struct omap_hwmod omap44xx_mpu_private_hwmod; + +/* + * Interconnects omap_hwmod structures + * hwmods that compose the global OMAP interconnect + */ + +/* + * 'dmm' class + * instance(s): dmm + */ +static struct omap_hwmod_class omap44xx_dmm_hwmod_class = { + .name = "dmm", +}; + +/* dmm interface data */ +/* l3_main_1 -> dmm */ +static struct omap_hwmod_ocp_if omap44xx_l3_main_1__dmm = { + .master = &omap44xx_l3_main_1_hwmod, + .slave = &omap44xx_dmm_hwmod, + .clk = "l3_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* mpu -> dmm */ +static struct omap_hwmod_ocp_if omap44xx_mpu__dmm = { + .master = &omap44xx_mpu_hwmod, + .slave = &omap44xx_dmm_hwmod, + .clk = "l3_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* dmm slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_dmm_slaves[] = { + &omap44xx_l3_main_1__dmm, + &omap44xx_mpu__dmm, +}; + +static struct omap_hwmod_irq_info omap44xx_dmm_irqs[] = { + { .irq = 113 + OMAP44XX_IRQ_GIC_START }, +}; + +static struct omap_hwmod omap44xx_dmm_hwmod = { + .name = "dmm", + .class = &omap44xx_dmm_hwmod_class, + .slaves = omap44xx_dmm_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_dmm_slaves), + .mpu_irqs = omap44xx_dmm_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_dmm_irqs), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* + * 'emif_fw' class + * instance(s): emif_fw + */ +static struct omap_hwmod_class omap44xx_emif_fw_hwmod_class = { + .name = "emif_fw", +}; + +/* emif_fw interface data */ +/* dmm -> emif_fw */ +static struct omap_hwmod_ocp_if omap44xx_dmm__emif_fw = { + .master = &omap44xx_dmm_hwmod, + .slave = &omap44xx_emif_fw_hwmod, + .clk = "l3_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_cfg -> emif_fw */ +static struct omap_hwmod_ocp_if omap44xx_l4_cfg__emif_fw = { + .master = &omap44xx_l4_cfg_hwmod, + .slave = &omap44xx_emif_fw_hwmod, + .clk = "l4_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* emif_fw slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_emif_fw_slaves[] = { + &omap44xx_dmm__emif_fw, + &omap44xx_l4_cfg__emif_fw, +}; + +static struct omap_hwmod omap44xx_emif_fw_hwmod = { + .name = "emif_fw", + .class = &omap44xx_emif_fw_hwmod_class, + .slaves = omap44xx_emif_fw_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_emif_fw_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* + * 'l3' class + * instance(s): l3_instr, l3_main_1, l3_main_2, l3_main_3 + */ +static struct omap_hwmod_class omap44xx_l3_hwmod_class = { + .name = "l3", +}; + +/* l3_instr interface data */ +/* l3_main_3 -> l3_instr */ +static struct omap_hwmod_ocp_if omap44xx_l3_main_3__l3_instr = { + .master = &omap44xx_l3_main_3_hwmod, + .slave = &omap44xx_l3_instr_hwmod, + .clk = "l3_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l3_instr slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_l3_instr_slaves[] = { + &omap44xx_l3_main_3__l3_instr, +}; + +static struct omap_hwmod omap44xx_l3_instr_hwmod = { + .name = "l3_instr", + .class = &omap44xx_l3_hwmod_class, + .slaves = omap44xx_l3_instr_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_l3_instr_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* l3_main_2 -> l3_main_1 */ +static struct omap_hwmod_ocp_if omap44xx_l3_main_2__l3_main_1 = { + .master = &omap44xx_l3_main_2_hwmod, + .slave = &omap44xx_l3_main_1_hwmod, + .clk = "l3_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_cfg -> l3_main_1 */ +static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_1 = { + .master = &omap44xx_l4_cfg_hwmod, + .slave = &omap44xx_l3_main_1_hwmod, + .clk = "l4_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* mpu -> l3_main_1 */ +static struct omap_hwmod_ocp_if omap44xx_mpu__l3_main_1 = { + .master = &omap44xx_mpu_hwmod, + .slave = &omap44xx_l3_main_1_hwmod, + .clk = "l3_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l3_main_1 slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_l3_main_1_slaves[] = { + &omap44xx_l3_main_2__l3_main_1, + &omap44xx_l4_cfg__l3_main_1, + &omap44xx_mpu__l3_main_1, +}; + +static struct omap_hwmod omap44xx_l3_main_1_hwmod = { + .name = "l3_main_1", + .class = &omap44xx_l3_hwmod_class, + .slaves = omap44xx_l3_main_1_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_l3_main_1_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* l3_main_2 interface data */ +/* l3_main_1 -> l3_main_2 */ +static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l3_main_2 = { + .master = &omap44xx_l3_main_1_hwmod, + .slave = &omap44xx_l3_main_2_hwmod, + .clk = "l3_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_cfg -> l3_main_2 */ +static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_2 = { + .master = &omap44xx_l4_cfg_hwmod, + .slave = &omap44xx_l3_main_2_hwmod, + .clk = "l4_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l3_main_2 slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_l3_main_2_slaves[] = { + &omap44xx_l3_main_1__l3_main_2, + &omap44xx_l4_cfg__l3_main_2, +}; + +static struct omap_hwmod omap44xx_l3_main_2_hwmod = { + .name = "l3_main_2", + .class = &omap44xx_l3_hwmod_class, + .slaves = omap44xx_l3_main_2_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_l3_main_2_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* l3_main_3 interface data */ +/* l3_main_1 -> l3_main_3 */ +static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l3_main_3 = { + .master = &omap44xx_l3_main_1_hwmod, + .slave = &omap44xx_l3_main_3_hwmod, + .clk = "l3_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l3_main_2 -> l3_main_3 */ +static struct omap_hwmod_ocp_if omap44xx_l3_main_2__l3_main_3 = { + .master = &omap44xx_l3_main_2_hwmod, + .slave = &omap44xx_l3_main_3_hwmod, + .clk = "l3_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_cfg -> l3_main_3 */ +static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_3 = { + .master = &omap44xx_l4_cfg_hwmod, + .slave = &omap44xx_l3_main_3_hwmod, + .clk = "l4_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l3_main_3 slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_l3_main_3_slaves[] = { + &omap44xx_l3_main_1__l3_main_3, + &omap44xx_l3_main_2__l3_main_3, + &omap44xx_l4_cfg__l3_main_3, +}; + +static struct omap_hwmod omap44xx_l3_main_3_hwmod = { + .name = "l3_main_3", + .class = &omap44xx_l3_hwmod_class, + .slaves = omap44xx_l3_main_3_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_l3_main_3_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* + * 'l4' class + * instance(s): l4_abe, l4_cfg, l4_per, l4_wkup + */ +static struct omap_hwmod_class omap44xx_l4_hwmod_class = { + .name = "l4", +}; + +/* l4_abe interface data */ +/* l3_main_1 -> l4_abe */ +static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l4_abe = { + .master = &omap44xx_l3_main_1_hwmod, + .slave = &omap44xx_l4_abe_hwmod, + .clk = "l3_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* mpu -> l4_abe */ +static struct omap_hwmod_ocp_if omap44xx_mpu__l4_abe = { + .master = &omap44xx_mpu_hwmod, + .slave = &omap44xx_l4_abe_hwmod, + .clk = "ocp_abe_iclk", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_abe slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_l4_abe_slaves[] = { + &omap44xx_l3_main_1__l4_abe, + &omap44xx_mpu__l4_abe, +}; + +static struct omap_hwmod omap44xx_l4_abe_hwmod = { + .name = "l4_abe", + .class = &omap44xx_l4_hwmod_class, + .slaves = omap44xx_l4_abe_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_l4_abe_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* l4_cfg interface data */ +/* l3_main_1 -> l4_cfg */ +static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l4_cfg = { + .master = &omap44xx_l3_main_1_hwmod, + .slave = &omap44xx_l4_cfg_hwmod, + .clk = "l3_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_cfg slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_l4_cfg_slaves[] = { + &omap44xx_l3_main_1__l4_cfg, +}; + +static struct omap_hwmod omap44xx_l4_cfg_hwmod = { + .name = "l4_cfg", + .class = &omap44xx_l4_hwmod_class, + .slaves = omap44xx_l4_cfg_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_l4_cfg_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* l4_per interface data */ +/* l3_main_2 -> l4_per */ +static struct omap_hwmod_ocp_if omap44xx_l3_main_2__l4_per = { + .master = &omap44xx_l3_main_2_hwmod, + .slave = &omap44xx_l4_per_hwmod, + .clk = "l3_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_per slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_l4_per_slaves[] = { + &omap44xx_l3_main_2__l4_per, +}; + +static struct omap_hwmod omap44xx_l4_per_hwmod = { + .name = "l4_per", + .class = &omap44xx_l4_hwmod_class, + .slaves = omap44xx_l4_per_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_l4_per_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* l4_wkup interface data */ +/* l4_cfg -> l4_wkup */ +static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l4_wkup = { + .master = &omap44xx_l4_cfg_hwmod, + .slave = &omap44xx_l4_wkup_hwmod, + .clk = "l4_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_wkup slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_l4_wkup_slaves[] = { + &omap44xx_l4_cfg__l4_wkup, +}; + +static struct omap_hwmod omap44xx_l4_wkup_hwmod = { + .name = "l4_wkup", + .class = &omap44xx_l4_hwmod_class, + .slaves = omap44xx_l4_wkup_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_l4_wkup_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* + * 'mpu_bus' class + * instance(s): mpu_private + */ +static struct omap_hwmod_class omap44xx_mpu_bus_hwmod_class = { + .name = "mpu_bus", +}; + +/* mpu_private interface data */ +/* mpu -> mpu_private */ +static struct omap_hwmod_ocp_if omap44xx_mpu__mpu_private = { + .master = &omap44xx_mpu_hwmod, + .slave = &omap44xx_mpu_private_hwmod, + .clk = "l3_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* mpu_private slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_mpu_private_slaves[] = { + &omap44xx_mpu__mpu_private, +}; + +static struct omap_hwmod omap44xx_mpu_private_hwmod = { + .name = "mpu_private", + .class = &omap44xx_mpu_bus_hwmod_class, + .slaves = omap44xx_mpu_private_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_mpu_private_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* + * 'mpu' class + * mpu sub-system + */ + +static struct omap_hwmod_class omap44xx_mpu_hwmod_class = { + .name = "mpu", +}; + +/* mpu */ +static struct omap_hwmod_irq_info omap44xx_mpu_irqs[] = { + { .name = "pl310", .irq = 0 + OMAP44XX_IRQ_GIC_START }, + { .name = "cti0", .irq = 1 + OMAP44XX_IRQ_GIC_START }, + { .name = "cti1", .irq = 2 + OMAP44XX_IRQ_GIC_START }, +}; + +/* mpu master ports */ +static struct omap_hwmod_ocp_if *omap44xx_mpu_masters[] = { + &omap44xx_mpu__l3_main_1, + &omap44xx_mpu__l4_abe, + &omap44xx_mpu__dmm, +}; + +static struct omap_hwmod omap44xx_mpu_hwmod = { + .name = "mpu", + .class = &omap44xx_mpu_hwmod_class, + .flags = (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET), + .mpu_irqs = omap44xx_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_mpu_irqs), + .main_clk = "dpll_mpu_m2_ck", + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM_MPU_MPU_CLKCTRL, + }, + }, + .masters = omap44xx_mpu_masters, + .masters_cnt = ARRAY_SIZE(omap44xx_mpu_masters), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +static __initdata struct omap_hwmod *omap44xx_hwmods[] = { + /* dmm class */ + &omap44xx_dmm_hwmod, + /* emif_fw class */ + &omap44xx_emif_fw_hwmod, + /* l3 class */ + &omap44xx_l3_instr_hwmod, + &omap44xx_l3_main_1_hwmod, + &omap44xx_l3_main_2_hwmod, + &omap44xx_l3_main_3_hwmod, + /* l4 class */ + &omap44xx_l4_abe_hwmod, + &omap44xx_l4_cfg_hwmod, + &omap44xx_l4_per_hwmod, + &omap44xx_l4_wkup_hwmod, + /* mpu_bus class */ + &omap44xx_mpu_private_hwmod, + + /* mpu class */ + &omap44xx_mpu_hwmod, + NULL, +}; + +int __init omap44xx_hwmod_init(void) +{ + return omap_hwmod_init(omap44xx_hwmods); +} + diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c index 723b44e252f..af00c174d7a 100644 --- a/arch/arm/mach-omap2/pm-debug.c +++ b/arch/arm/mach-omap2/pm-debug.c @@ -31,12 +31,17 @@ #include <plat/board.h> #include <plat/powerdomain.h> #include <plat/clockdomain.h> +#include <plat/dmtimer.h> #include "prm.h" #include "cm.h" #include "pm.h" int omap2_pm_debug; +u32 enable_off_mode; +u32 sleep_while_idle; +u32 wakeup_timer_seconds; +u32 wakeup_timer_milliseconds; #define DUMP_PRM_MOD_REG(mod, reg) \ regs[reg_count].name = #mod "." #reg; \ @@ -349,6 +354,23 @@ void pm_dbg_update_time(struct powerdomain *pwrdm, int prev) pwrdm->timer = t; } +void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds) +{ + u32 tick_rate, cycles; + + if (!seconds && !milliseconds) + return; + + tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer_wakeup)); + cycles = tick_rate * seconds + tick_rate * milliseconds / 1000; + omap_dm_timer_stop(gptimer_wakeup); + omap_dm_timer_set_load_start(gptimer_wakeup, 0, 0xffffffff - cycles); + + pr_info("PM: Resume timer in %u.%03u secs" + " (%d ticks at %d ticks/sec.)\n", + seconds, milliseconds, cycles, tick_rate); +} + static int clkdm_dbg_show_counter(struct clockdomain *clkdm, void *user) { struct seq_file *s = (struct seq_file *)user; @@ -494,8 +516,10 @@ int pm_dbg_regset_init(int reg_set) static int pwrdm_suspend_get(void *data, u64 *val) { - int ret; - ret = omap3_pm_get_suspend_state((struct powerdomain *)data); + int ret = -EINVAL; + + if (cpu_is_omap34xx()) + ret = omap3_pm_get_suspend_state((struct powerdomain *)data); *val = ret; if (ret >= 0) @@ -505,7 +529,10 @@ static int pwrdm_suspend_get(void *data, u64 *val) static int pwrdm_suspend_set(void *data, u64 val) { - return omap3_pm_set_suspend_state((struct powerdomain *)data, (int)val); + if (cpu_is_omap34xx()) + return omap3_pm_set_suspend_state( + (struct powerdomain *)data, (int)val); + return -EINVAL; } DEFINE_SIMPLE_ATTRIBUTE(pwrdm_suspend_fops, pwrdm_suspend_get, @@ -553,8 +580,10 @@ static int option_set(void *data, u64 val) *option = val; - if (option == &enable_off_mode) - omap3_pm_off_mode_enable(val); + if (option == &enable_off_mode) { + if (cpu_is_omap34xx()) + omap3_pm_off_mode_enable(val); + } return 0; } @@ -609,6 +638,9 @@ static int __init pm_dbg_init(void) &sleep_while_idle, &pm_dbg_option_fops); (void) debugfs_create_file("wakeup_timer_seconds", S_IRUGO | S_IWUGO, d, &wakeup_timer_seconds, &pm_dbg_option_fops); + (void) debugfs_create_file("wakeup_timer_milliseconds", + S_IRUGO | S_IWUGO, d, &wakeup_timer_milliseconds, + &pm_dbg_option_fops); pm_dbg_init_done = 1; return 0; diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index 68f9f2e9589..59ca03b0e69 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -18,11 +18,15 @@ #include <plat/omap_device.h> #include <plat/common.h> +#include <plat/powerdomain.h> +#include <plat/clockdomain.h> + static struct omap_device_pm_latency *pm_lats; static struct device *mpu_dev; -static struct device *dsp_dev; +static struct device *iva_dev; static struct device *l3_dev; +static struct device *dsp_dev; struct device *omap2_get_mpuss_device(void) { @@ -30,10 +34,10 @@ struct device *omap2_get_mpuss_device(void) return mpu_dev; } -struct device *omap2_get_dsp_device(void) +struct device *omap2_get_iva_device(void) { - WARN_ON_ONCE(!dsp_dev); - return dsp_dev; + WARN_ON_ONCE(!iva_dev); + return iva_dev; } struct device *omap2_get_l3_device(void) @@ -42,6 +46,13 @@ struct device *omap2_get_l3_device(void) return l3_dev; } +struct device *omap4_get_dsp_device(void) +{ + WARN_ON_ONCE(!dsp_dev); + return dsp_dev; +} +EXPORT_SYMBOL(omap4_get_dsp_device); + /* static int _init_omap_device(struct omap_hwmod *oh, void *user) */ static int _init_omap_device(char *name, struct device **new_dev) { @@ -69,8 +80,60 @@ static int _init_omap_device(char *name, struct device **new_dev) static void omap2_init_processor_devices(void) { _init_omap_device("mpu", &mpu_dev); - _init_omap_device("iva", &dsp_dev); - _init_omap_device("l3_main", &l3_dev); + _init_omap_device("iva", &iva_dev); + if (cpu_is_omap44xx()) { + _init_omap_device("l3_main_1", &l3_dev); + _init_omap_device("dsp", &dsp_dev); + } else { + _init_omap_device("l3_main", &l3_dev); + } +} + +/* + * This sets pwrdm state (other than mpu & core. Currently only ON & + * RET are supported. Function is assuming that clkdm doesn't have + * hw_sup mode enabled. + */ +int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state) +{ + u32 cur_state; + int sleep_switch = 0; + int ret = 0; + + if (pwrdm == NULL || IS_ERR(pwrdm)) + return -EINVAL; + + while (!(pwrdm->pwrsts & (1 << state))) { + if (state == PWRDM_POWER_OFF) + return ret; + state--; + } + + cur_state = pwrdm_read_next_pwrst(pwrdm); + if (cur_state == state) + return ret; + + if (pwrdm_read_pwrst(pwrdm) < PWRDM_POWER_ON) { + omap2_clkdm_wakeup(pwrdm->pwrdm_clkdms[0]); + sleep_switch = 1; + pwrdm_wait_transition(pwrdm); + } + + ret = pwrdm_set_next_pwrst(pwrdm, state); + if (ret) { + printk(KERN_ERR "Unable to set state of powerdomain: %s\n", + pwrdm->name); + goto err; + } + + if (sleep_switch) { + omap2_clkdm_allow_idle(pwrdm->pwrdm_clkdms[0]); + pwrdm_wait_transition(pwrdm); + pwrdm_state_switch(pwrdm); + } + +err: + return ret; } static int __init omap2_common_pm_init(void) diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index 3de6ece23fc..77770a13cea 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -20,7 +20,7 @@ extern void *omap3_secure_ram_storage; extern void omap3_pm_off_mode_enable(int); extern void omap_sram_idle(void); extern int omap3_can_sleep(void); -extern int set_pwrdm_state(struct powerdomain *pwrdm, u32 state); +extern int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state); extern int omap3_idle_init(void); struct cpuidle_params { @@ -48,9 +48,11 @@ extern struct omap_dm_timer *gptimer_wakeup; #ifdef CONFIG_PM_DEBUG extern void omap2_pm_dump(int mode, int resume, unsigned int us); +extern void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds); extern int omap2_pm_debug; #else #define omap2_pm_dump(mode, resume, us) do {} while (0); +#define omap2_pm_wakeup_on_timer(seconds, milliseconds) do {} while (0); #define omap2_pm_debug 0 #endif diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 7b03426c72a..d2b940c7215 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -38,7 +38,6 @@ #include <plat/prcm.h> #include <plat/gpmc.h> #include <plat/dma.h> -#include <plat/dmtimer.h> #include <asm/tlbflush.h> @@ -55,11 +54,6 @@ #define OMAP343X_TABLE_VALUE_OFFSET 0x30 #define OMAP343X_CONTROL_REG_VALUE_OFFSET 0x32 -u32 enable_off_mode; -u32 sleep_while_idle; -u32 wakeup_timer_seconds; -u32 wakeup_timer_milliseconds; - struct power_state { struct powerdomain *pwrdm; u32 next_state; @@ -351,7 +345,6 @@ void omap_sram_idle(void) int core_next_state = PWRDM_POWER_ON; int core_prev_state, per_prev_state; u32 sdrc_pwr = 0; - int per_state_modified = 0; if (!_omap_sram_idle) return; @@ -385,9 +378,9 @@ void omap_sram_idle(void) /* Enable IO-PAD and IO-CHAIN wakeups */ per_next_state = pwrdm_read_next_pwrst(per_pwrdm); core_next_state = pwrdm_read_next_pwrst(core_pwrdm); - if (omap3_has_io_wakeup() && \ - (per_next_state < PWRDM_POWER_ON || - core_next_state < PWRDM_POWER_ON)) { + if (omap3_has_io_wakeup() && + (per_next_state < PWRDM_POWER_ON || + core_next_state < PWRDM_POWER_ON)) { prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, PM_WKEN); omap3_enable_io_chain(); } @@ -396,19 +389,10 @@ void omap_sram_idle(void) if (per_next_state < PWRDM_POWER_ON) { omap_uart_prepare_idle(2); omap2_gpio_prepare_for_idle(per_next_state); - if (per_next_state == PWRDM_POWER_OFF) { - if (core_next_state == PWRDM_POWER_ON) { - per_next_state = PWRDM_POWER_RET; - pwrdm_set_next_pwrst(per_pwrdm, per_next_state); - per_state_modified = 1; - } else + if (per_next_state == PWRDM_POWER_OFF) omap3_per_save_context(); - } } - if (pwrdm_read_pwrst(cam_pwrdm) == PWRDM_POWER_ON) - omap2_clkdm_deny_idle(mpu_pwrdm->pwrdm_clkdms[0]); - /* CORE */ if (core_next_state < PWRDM_POWER_ON) { omap_uart_prepare_idle(0); @@ -475,8 +459,6 @@ void omap_sram_idle(void) if (per_prev_state == PWRDM_POWER_OFF) omap3_per_restore_context(); omap_uart_resume_idle(2); - if (per_state_modified) - pwrdm_set_next_pwrst(per_pwrdm, PWRDM_POWER_OFF); } /* Disable IO-PAD and IO-CHAIN wakeup */ @@ -501,51 +483,6 @@ int omap3_can_sleep(void) return 1; } -/* This sets pwrdm state (other than mpu & core. Currently only ON & - * RET are supported. Function is assuming that clkdm doesn't have - * hw_sup mode enabled. */ -int set_pwrdm_state(struct powerdomain *pwrdm, u32 state) -{ - u32 cur_state; - int sleep_switch = 0; - int ret = 0; - - if (pwrdm == NULL || IS_ERR(pwrdm)) - return -EINVAL; - - while (!(pwrdm->pwrsts & (1 << state))) { - if (state == PWRDM_POWER_OFF) - return ret; - state--; - } - - cur_state = pwrdm_read_next_pwrst(pwrdm); - if (cur_state == state) - return ret; - - if (pwrdm_read_pwrst(pwrdm) < PWRDM_POWER_ON) { - omap2_clkdm_wakeup(pwrdm->pwrdm_clkdms[0]); - sleep_switch = 1; - pwrdm_wait_transition(pwrdm); - } - - ret = pwrdm_set_next_pwrst(pwrdm, state); - if (ret) { - printk(KERN_ERR "Unable to set state of powerdomain: %s\n", - pwrdm->name); - goto err; - } - - if (sleep_switch) { - omap2_clkdm_allow_idle(pwrdm->pwrdm_clkdms[0]); - pwrdm_wait_transition(pwrdm); - pwrdm_state_switch(pwrdm); - } - -err: - return ret; -} - static void omap3_pm_idle(void) { local_irq_disable(); @@ -567,23 +504,6 @@ out: #ifdef CONFIG_SUSPEND static suspend_state_t suspend_state; -static void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds) -{ - u32 tick_rate, cycles; - - if (!seconds && !milliseconds) - return; - - tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer_wakeup)); - cycles = tick_rate * seconds + tick_rate * milliseconds / 1000; - omap_dm_timer_stop(gptimer_wakeup); - omap_dm_timer_set_load_start(gptimer_wakeup, 0, 0xffffffff - cycles); - - pr_info("PM: Resume timer in %u.%03u secs" - " (%d ticks at %d ticks/sec.)\n", - seconds, milliseconds, cycles, tick_rate); -} - static int omap3_pm_prepare(void) { disable_hlt(); @@ -604,7 +524,7 @@ static int omap3_pm_suspend(void) pwrst->saved_state = pwrdm_read_next_pwrst(pwrst->pwrdm); /* Set ones wanted by suspend */ list_for_each_entry(pwrst, &pwrst_list, node) { - if (set_pwrdm_state(pwrst->pwrdm, pwrst->next_state)) + if (omap_set_pwrdm_state(pwrst->pwrdm, pwrst->next_state)) goto restore; if (pwrdm_clear_all_prev_pwrst(pwrst->pwrdm)) goto restore; @@ -625,7 +545,7 @@ restore: pwrst->pwrdm->name, pwrst->next_state); ret = -1; } - set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state); + omap_set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state); } if (ret) printk(KERN_ERR "Could not enter target state in pm_suspend\n"); @@ -974,7 +894,7 @@ void omap3_pm_off_mode_enable(int enable) list_for_each_entry(pwrst, &pwrst_list, node) { pwrst->next_state = state; - set_pwrdm_state(pwrst->pwrdm, state); + omap_set_pwrdm_state(pwrst->pwrdm, state); } } @@ -1019,7 +939,7 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused) if (pwrdm_has_hdwr_sar(pwrdm)) pwrdm_enable_hdwr_sar(pwrdm); - return set_pwrdm_state(pwrst->pwrdm, pwrst->next_state); + return omap_set_pwrdm_state(pwrst->pwrdm, pwrst->next_state); } /* @@ -1029,9 +949,6 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused) */ static int __init clkdms_setup(struct clockdomain *clkdm, void *unused) { - clkdm_clear_all_wkdeps(clkdm); - clkdm_clear_all_sleepdeps(clkdm); - if (clkdm->flags & CLKDM_CAN_ENABLE_AUTO) omap2_clkdm_allow_idle(clkdm); else if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP && diff --git a/arch/arm/mach-omap2/pm_bus.c b/arch/arm/mach-omap2/pm_bus.c new file mode 100644 index 00000000000..784989f8f2f --- /dev/null +++ b/arch/arm/mach-omap2/pm_bus.c @@ -0,0 +1,85 @@ +/* + * Runtime PM support code for OMAP + * + * Author: Kevin Hilman, Deep Root Systems, LLC + * + * Copyright (C) 2010 Texas Instruments, Inc. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/io.h> +#include <linux/pm_runtime.h> +#include <linux/platform_device.h> +#include <linux/mutex.h> + +#include <plat/omap_device.h> +#include <plat/omap-pm.h> + +#ifdef CONFIG_PM_RUNTIME +int omap_pm_runtime_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + int r, ret = 0; + + dev_dbg(dev, "%s\n", __func__); + + ret = pm_generic_runtime_suspend(dev); + + if (!ret && dev->parent == &omap_device_parent) { + r = omap_device_idle(pdev); + WARN_ON(r); + } + + return ret; +}; + +int omap_pm_runtime_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + int r; + + dev_dbg(dev, "%s\n", __func__); + + if (dev->parent == &omap_device_parent) { + r = omap_device_enable(pdev); + WARN_ON(r); + } + + return pm_generic_runtime_resume(dev); +}; +#else +#define omap_pm_runtime_suspend NULL +#define omap_pm_runtime_resume NULL +#endif /* CONFIG_PM_RUNTIME */ + +static int __init omap_pm_runtime_init(void) +{ + const struct dev_pm_ops *pm; + struct dev_pm_ops *omap_pm; + + pm = platform_bus_get_pm_ops(); + if (!pm) { + pr_err("%s: unable to get dev_pm_ops from platform_bus\n", + __func__); + return -ENODEV; + } + + omap_pm = kmemdup(pm, sizeof(struct dev_pm_ops), GFP_KERNEL); + if (!omap_pm) { + pr_err("%s: unable to alloc memory for new dev_pm_ops\n", + __func__); + return -ENOMEM; + } + + omap_pm->runtime_suspend = omap_pm_runtime_suspend; + omap_pm->runtime_resume = omap_pm_runtime_resume; + + platform_bus_set_pm_ops(omap_pm); + + return 0; +} +core_initcall(omap_pm_runtime_init); diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c index c20137497c9..d4388d34c26 100644 --- a/arch/arm/mach-omap2/prcm.c +++ b/arch/arm/mach-omap2/prcm.c @@ -33,6 +33,7 @@ #include "cm.h" #include "prm.h" #include "prm-regbits-24xx.h" +#include "prm-regbits-44xx.h" static void __iomem *prm_base; static void __iomem *cm_base; @@ -161,8 +162,8 @@ void omap_prcm_arch_reset(char mode, const char *cmd) prm_set_mod_reg_bits(OMAP_RST_DPLL3_MASK, prcm_offs, OMAP2_RM_RSTCTRL); if (cpu_is_omap44xx()) - prm_set_mod_reg_bits(OMAP_RST_DPLL3_MASK, prcm_offs, - OMAP4_RM_RSTCTRL); + prm_set_mod_reg_bits(OMAP4430_RST_GLOBAL_WARM_SW_MASK, + prcm_offs, OMAP4_RM_RSTCTRL); } static inline u32 __omap_prcm_read(void __iomem *base, s16 module, u16 reg) @@ -215,6 +216,30 @@ u32 prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask) return v; } +/* Read a PRM register, AND it, and shift the result down to bit 0 */ +u32 omap4_prm_read_bits_shift(void __iomem *reg, u32 mask) +{ + u32 v; + + v = __raw_readl(reg); + v &= mask; + v >>= __ffs(mask); + + return v; +} + +/* Read-modify-write a register in a PRM module. Caller must lock */ +u32 omap4_prm_rmw_reg_bits(u32 mask, u32 bits, void __iomem *reg) +{ + u32 v; + + v = __raw_readl(reg); + v &= ~mask; + v |= bits; + __raw_writel(v, reg); + + return v; +} /* Read a register in a CM module */ u32 cm_read_mod_reg(s16 module, u16 idx) { diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h index 588873b9303..7be040b2fda 100644 --- a/arch/arm/mach-omap2/prm.h +++ b/arch/arm/mach-omap2/prm.h @@ -5,7 +5,7 @@ * OMAP2/3 Power/Reset Management (PRM) register definitions * * Copyright (C) 2007-2009 Texas Instruments, Inc. - * Copyright (C) 2009 Nokia Corporation + * Copyright (C) 2010 Nokia Corporation * * Written by Paul Walmsley * @@ -246,6 +246,15 @@ static inline u32 prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx) return prm_rmw_mod_reg_bits(bits, 0x0, module, idx); } +/* These omap2_ PRM functions apply to both OMAP2 and 3 */ +int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift); +int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift); +int omap2_prm_deassert_hardreset(s16 prm_mod, u8 shift); + +int omap4_prm_is_hardreset_asserted(void __iomem *rstctrl_reg, u8 shift); +int omap4_prm_assert_hardreset(void __iomem *rstctrl_reg, u8 shift); +int omap4_prm_deassert_hardreset(void __iomem *rstctrl_reg, u8 shift); + #endif /* @@ -398,4 +407,11 @@ static inline u32 prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx) #define OMAP_POWERSTATE_MASK (0x3 << 0) +/* + * MAX_MODULE_HARDRESET_WAIT: Maximum microseconds to wait for an OMAP + * submodule to exit hardreset + */ +#define MAX_MODULE_HARDRESET_WAIT 10000 + + #endif diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c new file mode 100644 index 00000000000..421771eee45 --- /dev/null +++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c @@ -0,0 +1,110 @@ +/* + * OMAP2/3 PRM module functions + * + * Copyright (C) 2010 Texas Instruments, Inc. + * Copyright (C) 2010 Nokia Corporation + * Benoît Cousson + * Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/err.h> + +#include <plat/common.h> +#include <plat/cpu.h> +#include <plat/prcm.h> + +#include "prm.h" +#include "prm-regbits-24xx.h" +#include "prm-regbits-34xx.h" + +/** + * omap2_prm_is_hardreset_asserted - read the HW reset line state of + * submodules contained in the hwmod module + * @prm_mod: PRM submodule base (e.g. CORE_MOD) + * @shift: register bit shift corresponding to the reset line to check + * + * Returns 1 if the (sub)module hardreset line is currently asserted, + * 0 if the (sub)module hardreset line is not currently asserted, or + * -EINVAL if called while running on a non-OMAP2/3 chip. + */ +int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift) +{ + if (!(cpu_is_omap24xx() || cpu_is_omap34xx())) + return -EINVAL; + + return prm_read_mod_bits_shift(prm_mod, OMAP2_RM_RSTCTRL, + (1 << shift)); +} + +/** + * omap2_prm_assert_hardreset - assert the HW reset line of a submodule + * @prm_mod: PRM submodule base (e.g. CORE_MOD) + * @shift: register bit shift corresponding to the reset line to assert + * + * Some IPs like dsp or iva contain processors that require an HW + * reset line to be asserted / deasserted in order to fully enable the + * IP. These modules may have multiple hard-reset lines that reset + * different 'submodules' inside the IP block. This function will + * place the submodule into reset. Returns 0 upon success or -EINVAL + * upon an argument error. + */ +int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift) +{ + u32 mask; + + if (!(cpu_is_omap24xx() || cpu_is_omap34xx())) + return -EINVAL; + + mask = 1 << shift; + prm_rmw_mod_reg_bits(mask, mask, prm_mod, OMAP2_RM_RSTCTRL); + + return 0; +} + +/** + * omap2_prm_deassert_hardreset - deassert a submodule hardreset line and wait + * @prm_mod: PRM submodule base (e.g. CORE_MOD) + * @shift: register bit shift corresponding to the reset line to deassert + * + * Some IPs like dsp or iva contain processors that require an HW + * reset line to be asserted / deasserted in order to fully enable the + * IP. These modules may have multiple hard-reset lines that reset + * different 'submodules' inside the IP block. This function will + * take the submodule out of reset and wait until the PRCM indicates + * that the reset has completed before returning. Returns 0 upon success or + * -EINVAL upon an argument error, -EEXIST if the submodule was already out + * of reset, or -EBUSY if the submodule did not exit reset promptly. + */ +int omap2_prm_deassert_hardreset(s16 prm_mod, u8 shift) +{ + u32 mask; + int c; + + if (!(cpu_is_omap24xx() || cpu_is_omap34xx())) + return -EINVAL; + + mask = 1 << shift; + + /* Check the current status to avoid de-asserting the line twice */ + if (prm_read_mod_bits_shift(prm_mod, OMAP2_RM_RSTCTRL, mask) == 0) + return -EEXIST; + + /* Clear the reset status by writing 1 to the status bit */ + prm_rmw_mod_reg_bits(0xffffffff, mask, prm_mod, OMAP2_RM_RSTST); + /* de-assert the reset control line */ + prm_rmw_mod_reg_bits(mask, 0, prm_mod, OMAP2_RM_RSTCTRL); + /* wait the status to be set */ + omap_test_timeout(prm_read_mod_bits_shift(prm_mod, OMAP2_RM_RSTST, + mask), + MAX_MODULE_HARDRESET_WAIT, c); + + return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0; +} + diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c new file mode 100644 index 00000000000..a1ff918d9be --- /dev/null +++ b/arch/arm/mach-omap2/prm44xx.c @@ -0,0 +1,116 @@ +/* + * OMAP4 PRM module functions + * + * Copyright (C) 2010 Texas Instruments, Inc. + * Copyright (C) 2010 Nokia Corporation + * Benoît Cousson + * Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/err.h> + +#include <plat/common.h> +#include <plat/cpu.h> +#include <plat/prcm.h> + +#include "prm.h" +#include "prm-regbits-44xx.h" + +/* + * Address offset (in bytes) between the reset control and the reset + * status registers: 4 bytes on OMAP4 + */ +#define OMAP4_RST_CTRL_ST_OFFSET 4 + +/** + * omap4_prm_is_hardreset_asserted - read the HW reset line state of + * submodules contained in the hwmod module + * @rstctrl_reg: RM_RSTCTRL register address for this module + * @shift: register bit shift corresponding to the reset line to check + * + * Returns 1 if the (sub)module hardreset line is currently asserted, + * 0 if the (sub)module hardreset line is not currently asserted, or + * -EINVAL upon parameter error. + */ +int omap4_prm_is_hardreset_asserted(void __iomem *rstctrl_reg, u8 shift) +{ + if (!cpu_is_omap44xx() || !rstctrl_reg) + return -EINVAL; + + return omap4_prm_read_bits_shift(rstctrl_reg, (1 << shift)); +} + +/** + * omap4_prm_assert_hardreset - assert the HW reset line of a submodule + * @rstctrl_reg: RM_RSTCTRL register address for this module + * @shift: register bit shift corresponding to the reset line to assert + * + * Some IPs like dsp, ipu or iva contain processors that require an HW + * reset line to be asserted / deasserted in order to fully enable the + * IP. These modules may have multiple hard-reset lines that reset + * different 'submodules' inside the IP block. This function will + * place the submodule into reset. Returns 0 upon success or -EINVAL + * upon an argument error. + */ +int omap4_prm_assert_hardreset(void __iomem *rstctrl_reg, u8 shift) +{ + u32 mask; + + if (!cpu_is_omap44xx() || !rstctrl_reg) + return -EINVAL; + + mask = 1 << shift; + omap4_prm_rmw_reg_bits(mask, mask, rstctrl_reg); + + return 0; +} + +/** + * omap4_prm_deassert_hardreset - deassert a submodule hardreset line and wait + * @rstctrl_reg: RM_RSTCTRL register address for this module + * @shift: register bit shift corresponding to the reset line to deassert + * + * Some IPs like dsp, ipu or iva contain processors that require an HW + * reset line to be asserted / deasserted in order to fully enable the + * IP. These modules may have multiple hard-reset lines that reset + * different 'submodules' inside the IP block. This function will + * take the submodule out of reset and wait until the PRCM indicates + * that the reset has completed before returning. Returns 0 upon success or + * -EINVAL upon an argument error, -EEXIST if the submodule was already out + * of reset, or -EBUSY if the submodule did not exit reset promptly. + */ +int omap4_prm_deassert_hardreset(void __iomem *rstctrl_reg, u8 shift) +{ + u32 mask; + void __iomem *rstst_reg; + int c; + + if (!cpu_is_omap44xx() || !rstctrl_reg) + return -EINVAL; + + rstst_reg = rstctrl_reg + OMAP4_RST_CTRL_ST_OFFSET; + + mask = 1 << shift; + + /* Check the current status to avoid de-asserting the line twice */ + if (omap4_prm_read_bits_shift(rstctrl_reg, mask) == 0) + return -EEXIST; + + /* Clear the reset status by writing 1 to the status bit */ + omap4_prm_rmw_reg_bits(0xffffffff, mask, rstst_reg); + /* de-assert the reset control line */ + omap4_prm_rmw_reg_bits(mask, 0, rstctrl_reg); + /* wait the status to be set */ + omap_test_timeout(omap4_prm_read_bits_shift(rstst_reg, mask), + MAX_MODULE_HARDRESET_WAIT, c); + + return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0; +} + diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c index 74fbed8491f..5a3e606dc44 100644 --- a/arch/arm/mach-omap2/timer-gp.c +++ b/arch/arm/mach-omap2/timer-gp.c @@ -228,8 +228,10 @@ static void __init omap2_gp_clocksource_init(void) static void __init omap2_gp_timer_init(void) { #ifdef CONFIG_LOCAL_TIMERS - twd_base = ioremap(OMAP44XX_LOCAL_TWD_BASE, SZ_256); - BUG_ON(!twd_base); + if (cpu_is_omap44xx()) { + twd_base = ioremap(OMAP44XX_LOCAL_TWD_BASE, SZ_256); + BUG_ON(!twd_base); + } #endif omap_dm_timer_init(); diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index e39a417a368..d98c5c0e164 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -19,7 +19,7 @@ config ARCH_OMAP2PLUS bool "TI OMAP2/3/4" select COMMON_CLKDEV help - "Systems based on omap24xx, omap34xx or omap44xx" + "Systems based on OMAP2, OMAP3 or OMAP4" endchoice diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index 9405831b746..2a151917ef5 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile @@ -31,4 +31,4 @@ obj-y += $(i2c-omap-m) $(i2c-omap-y) # OMAP mailbox framework obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox.o -obj-$(CONFIG_OMAP_PM_NOOP) += omap-pm-noop.o
\ No newline at end of file +obj-$(CONFIG_OMAP_PM_NOOP) += omap-pm-noop.o diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index 44bafdab2dc..1d706cf63ca 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -581,7 +581,7 @@ int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) * When the functional clock disappears, too quick writes seem * to cause an abort. XXX Is this still necessary? */ - __delay(150000); + __delay(300000); return ret; } diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 7951eefe1a0..c05c653d167 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -2084,9 +2084,10 @@ void omap2_gpio_prepare_for_idle(int power_state) for (i = min; i < gpio_bank_count; i++) { struct gpio_bank *bank = &gpio_bank[i]; - u32 l1, l2; + u32 l1 = 0, l2 = 0; + int j; - if (bank->dbck_enable_mask) + for (j = 0; j < hweight_long(bank->dbck_enable_mask); j++) clk_disable(bank->dbck); if (power_state > PWRDM_POWER_OFF) @@ -2151,9 +2152,10 @@ void omap2_gpio_resume_after_idle(void) min = 1; for (i = min; i < gpio_bank_count; i++) { struct gpio_bank *bank = &gpio_bank[i]; - u32 l, gen, gen0, gen1; + u32 l = 0, gen, gen0, gen1; + int j; - if (bank->dbck_enable_mask) + for (j = 0; j < hweight_long(bank->dbck_enable_mask); j++) clk_enable(bank->dbck); if (!workaround_enabled) diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h index 7cd01807c1e..2d8f98d7ae5 100644 --- a/arch/arm/plat-omap/include/plat/common.h +++ b/arch/arm/plat-omap/include/plat/common.h @@ -92,7 +92,8 @@ void omap3_map_io(void); }) extern struct device *omap2_get_mpuss_device(void); -extern struct device *omap2_get_dsp_device(void); +extern struct device *omap2_get_iva_device(void); extern struct device *omap2_get_l3_device(void); +extern struct device *omap4_get_dsp_device(void); #endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */ diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index 2e2ae530fce..9b38e4bddf5 100644 --- a/arch/arm/plat-omap/include/plat/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h @@ -391,6 +391,7 @@ IS_OMAP_TYPE(3517, 0x3517) #define OMAP443X_CLASS 0x44300044 #define OMAP4430_REV_ES1_0 0x44300044 +#define OMAP4430_REV_ES2_0 0x44301044 /* * omap_chip bits @@ -417,10 +418,12 @@ IS_OMAP_TYPE(3517, 0x3517) #define CHIP_IS_OMAP4430ES1 (1 << 8) #define CHIP_IS_OMAP3630ES1_1 (1 << 9) #define CHIP_IS_OMAP3630ES1_2 (1 << 10) +#define CHIP_IS_OMAP4430ES2 (1 << 11) #define CHIP_IS_OMAP24XX (CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430) -#define CHIP_IS_OMAP4430 (CHIP_IS_OMAP4430ES1) +#define CHIP_IS_OMAP4430 (CHIP_IS_OMAP4430ES1 | \ + CHIP_IS_OMAP4430ES2) /* * "GE" here represents "greater than or equal to" in terms of ES diff --git a/arch/arm/plat-omap/include/plat/i2c.h b/arch/arm/plat-omap/include/plat/i2c.h index 87f6bf2ea4f..36a0befd616 100644 --- a/arch/arm/plat-omap/include/plat/i2c.h +++ b/arch/arm/plat-omap/include/plat/i2c.h @@ -18,6 +18,8 @@ * 02110-1301 USA * */ +#ifndef __ASM__ARCH_OMAP_I2C_H +#define __ASM__ARCH_OMAP_I2C_H #include <linux/i2c.h> @@ -36,3 +38,5 @@ static inline int omap_register_i2c_bus(int bus_id, u32 clkrate, void __init omap1_i2c_mux_pins(int bus_id); void __init omap2_i2c_mux_pins(int bus_id); + +#endif /* __ASM__ARCH_OMAP_I2C_H */ diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h index 9b89ec601ee..4f819fc261b 100644 --- a/arch/arm/plat-omap/include/plat/mmc.h +++ b/arch/arm/plat-omap/include/plat/mmc.h @@ -73,10 +73,9 @@ struct omap_mmc_platform_data { struct omap_mmc_slot_data { - /* 4 wire signaling is optional, and is used for SD/SDIO/HSMMC; - * 8 wire signaling is also optional, and is used with HSMMC - */ - u8 wires; + /* 4/8 wires and any additional host capabilities + * need to OR'd all capabilities (ref. linux/mmc/host.h) */ + u32 caps; /* * nomux means "standard" muxing is wrong on this board, and diff --git a/arch/arm/plat-omap/include/plat/omap_device.h b/arch/arm/plat-omap/include/plat/omap_device.h index 25cd9ac3b09..28e2d1a7843 100644 --- a/arch/arm/plat-omap/include/plat/omap_device.h +++ b/arch/arm/plat-omap/include/plat/omap_device.h @@ -36,6 +36,8 @@ #include <plat/omap_hwmod.h> +extern struct device omap_device_parent; + /* omap_device._state values */ #define OMAP_DEVICE_STATE_UNKNOWN 0 #define OMAP_DEVICE_STATE_ENABLED 1 @@ -62,7 +64,6 @@ * */ struct omap_device { - u32 magic; struct platform_device pdev; struct omap_hwmod **hwmods; struct omap_device_pm_latency *pm_lats; @@ -82,7 +83,6 @@ int omap_device_shutdown(struct platform_device *pdev); /* Core code interface */ -bool omap_device_is_valid(struct omap_device *od); int omap_device_count_resources(struct omap_device *od); int omap_device_fill_resources(struct omap_device *od, struct resource *res); diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h index a4e508dfaba..c1835afc238 100644 --- a/arch/arm/plat-omap/include/plat/omap_hwmod.h +++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h @@ -14,19 +14,16 @@ * * These headers and macros are used to define OMAP on-chip module * data and their integration with other OMAP modules and Linux. - * - * References: - * - OMAP2420 Multimedia Processor Silicon Revision 2.1.1, 2.2 (SWPU064) - * - OMAP2430 Multimedia Device POP Silicon Revision 2.1 (SWPU090) - * - OMAP34xx Multimedia Device Silicon Revision 3.1 (SWPU108) - * - OMAP4430 Multimedia Device Silicon Revision 1.0 (SWPU140) - * - Open Core Protocol Specification 2.2 + * Copious documentation and references can also be found in the + * omap_hwmod code, in arch/arm/mach-omap2/omap_hwmod.c (as of this + * writing). * * To do: * - add interconnect error log structures * - add pinmuxing * - init_conn_id_bit (CONNID_BIT_VECTOR) * - implement default hwmod SMS/SDRC flags? + * - remove unused fields * */ #ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H @@ -35,6 +32,7 @@ #include <linux/kernel.h> #include <linux/list.h> #include <linux/ioport.h> +#include <linux/mutex.h> #include <plat/cpu.h> struct omap_device; @@ -96,7 +94,7 @@ struct omap_hwmod_irq_info { /** * struct omap_hwmod_dma_info - DMA channels used by the hwmod * @name: name of the DMA channel (module local name) - * @dma_ch: DMA channel ID + * @dma_req: DMA request ID * * @name should be something short, e.g., "tx" or "rx". It is for use * by platform_get_resource_byname(). It is defined locally to the @@ -104,7 +102,20 @@ struct omap_hwmod_irq_info { */ struct omap_hwmod_dma_info { const char *name; - u16 dma_ch; + u16 dma_req; +}; + +/** + * struct omap_hwmod_rst_info - IPs reset lines use by hwmod + * @name: name of the reset line (module local name) + * @rst_shift: Offset of the reset bit + * + * @name should be something short, e.g., "cpu0" or "rst". It is defined + * locally to the hwmod. + */ +struct omap_hwmod_rst_info { + const char *name; + u8 rst_shift; }; /** @@ -237,8 +248,9 @@ struct omap_hwmod_ocp_if { #define SYSC_HAS_CLOCKACTIVITY (1 << 4) #define SYSC_HAS_SIDLEMODE (1 << 5) #define SYSC_HAS_MIDLEMODE (1 << 6) -#define SYSS_MISSING (1 << 7) +#define SYSS_HAS_RESET_STATUS (1 << 7) #define SYSC_NO_CACHE (1 << 8) /* XXX SW flag, belongs elsewhere */ +#define SYSC_HAS_RESET_STATUS (1 << 9) /* omap_hwmod_sysconfig.clockact flags */ #define CLOCKACT_TEST_BOTH 0x0 @@ -327,10 +339,12 @@ struct omap_hwmod_omap2_prcm { /** * struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data * @clkctrl_reg: PRCM address of the clock control register + * @rstctrl_reg: adress of the XXX_RSTCTRL register located in the PRM * @submodule_wkdep_bit: bit shift of the WKDEP range */ struct omap_hwmod_omap4_prcm { void __iomem *clkctrl_reg; + void __iomem *rstctrl_reg; u8 submodule_wkdep_bit; }; @@ -352,6 +366,10 @@ struct omap_hwmod_omap4_prcm { * HWMOD_SET_DEFAULT_CLOCKACT: program CLOCKACTIVITY bits at startup * HWMOD_NO_IDLEST : this module does not have idle status - this is the case * only for few initiator modules on OMAP2 & 3. + * HWMOD_CONTROL_OPT_CLKS_IN_RESET: Enable all optional clocks during reset. + * This is needed for devices like DSS that require optional clocks enabled + * in order to complete the reset. Optional clocks will be disabled + * again after the reset. */ #define HWMOD_SWSUP_SIDLE (1 << 0) #define HWMOD_SWSUP_MSTANDBY (1 << 1) @@ -360,6 +378,7 @@ struct omap_hwmod_omap4_prcm { #define HWMOD_NO_OCP_AUTOIDLE (1 << 4) #define HWMOD_SET_DEFAULT_CLOCKACT (1 << 5) #define HWMOD_NO_IDLEST (1 << 6) +#define HWMOD_CONTROL_OPT_CLKS_IN_RESET (1 << 7) /* * omap_hwmod._int_flags definitions @@ -410,7 +429,7 @@ struct omap_hwmod_class { * @class: struct omap_hwmod_class * to the class of this hwmod * @od: struct omap_device currently associated with this hwmod (internal use) * @mpu_irqs: ptr to an array of MPU IRQs (see also mpu_irqs_cnt) - * @sdma_chs: ptr to an array of SDMA channel IDs (see also sdma_chs_cnt) + * @sdma_reqs: ptr to an array of System DMA request IDs (see sdma_reqs_cnt) * @prcm: PRCM data pertaining to this hwmod * @main_clk: main clock: OMAP clock name * @_clk: pointer to the main struct clk (filled in at runtime) @@ -424,7 +443,7 @@ struct omap_hwmod_class { * @msuspendmux_reg_id: CONTROL_MSUSPENDMUX register ID (1-6) * @msuspendmux_shift: CONTROL_MSUSPENDMUX register bit shift * @mpu_irqs_cnt: number of @mpu_irqs - * @sdma_chs_cnt: number of @sdma_chs + * @sdma_reqs_cnt: number of @sdma_reqs * @opt_clks_cnt: number of @opt_clks * @master_cnt: number of @master entries * @slaves_cnt: number of @slave entries @@ -433,6 +452,7 @@ struct omap_hwmod_class { * @_state: internal-use hwmod state * @flags: hwmod flags (documented below) * @omap_chip: OMAP chips this hwmod is present on + * @_mutex: mutex serializing operations on this hwmod * @node: list node for hwmod list (internal use) * * @main_clk refers to this module's "main clock," which for our @@ -448,7 +468,8 @@ struct omap_hwmod { struct omap_hwmod_class *class; struct omap_device *od; struct omap_hwmod_irq_info *mpu_irqs; - struct omap_hwmod_dma_info *sdma_chs; + struct omap_hwmod_dma_info *sdma_reqs; + struct omap_hwmod_rst_info *rst_lines; union { struct omap_hwmod_omap2_prcm omap2; struct omap_hwmod_omap4_prcm omap4; @@ -461,6 +482,7 @@ struct omap_hwmod { void *dev_attr; u32 _sysc_cache; void __iomem *_mpu_rt_va; + struct mutex _mutex; struct list_head node; u16 flags; u8 _mpu_port_index; @@ -468,7 +490,8 @@ struct omap_hwmod { u8 msuspendmux_shift; u8 response_lat; u8 mpu_irqs_cnt; - u8 sdma_chs_cnt; + u8 sdma_reqs_cnt; + u8 rst_lines_cnt; u8 opt_clks_cnt; u8 masters_cnt; u8 slaves_cnt; @@ -492,6 +515,10 @@ int omap_hwmod_idle(struct omap_hwmod *oh); int _omap_hwmod_idle(struct omap_hwmod *oh); int omap_hwmod_shutdown(struct omap_hwmod *oh); +int omap_hwmod_assert_hardreset(struct omap_hwmod *oh, const char *name); +int omap_hwmod_deassert_hardreset(struct omap_hwmod *oh, const char *name); +int omap_hwmod_read_hardreset(struct omap_hwmod *oh, const char *name); + int omap_hwmod_enable_clocks(struct omap_hwmod *oh); int omap_hwmod_disable_clocks(struct omap_hwmod *oh); @@ -534,5 +561,6 @@ int omap_hwmod_for_each_by_class(const char *classname, extern int omap2420_hwmod_init(void); extern int omap2430_hwmod_init(void); extern int omap3xxx_hwmod_init(void); +extern int omap44xx_hwmod_init(void); #endif diff --git a/arch/arm/plat-omap/include/plat/prcm.h b/arch/arm/plat-omap/include/plat/prcm.h index 9fbd91419cd..ab77442e42a 100644 --- a/arch/arm/plat-omap/include/plat/prcm.h +++ b/arch/arm/plat-omap/include/plat/prcm.h @@ -38,6 +38,8 @@ u32 prm_read_mod_reg(s16 module, u16 idx); void prm_write_mod_reg(u32 val, s16 module, u16 idx); u32 prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx); u32 prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask); +u32 omap4_prm_read_bits_shift(void __iomem *reg, u32 mask); +u32 omap4_prm_rmw_reg_bits(u32 mask, u32 bits, void __iomem *reg); u32 cm_read_mod_reg(s16 module, u16 idx); void cm_write_mod_reg(u32 val, s16 module, u16 idx); u32 cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx); diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h index ddf723be48d..57dffa7e3ea 100644 --- a/arch/arm/plat-omap/include/plat/uncompress.h +++ b/arch/arm/plat-omap/include/plat/uncompress.h @@ -153,6 +153,7 @@ static inline void __arch_decomp_setup(unsigned long arch_id) /* omap4 based boards using UART3 */ DEBUG_LL_OMAP4(3, omap_4430sdp); + DEBUG_LL_OMAP4(3, omap4_panda); /* zoom2/3 external uart */ DEBUG_LL_ZOOM(omap_zoom2); diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h index 2a9427c8cc4..667456228a1 100644 --- a/arch/arm/plat-omap/include/plat/usb.h +++ b/arch/arm/plat-omap/include/plat/usb.h @@ -105,7 +105,7 @@ static inline void omap1_usb_init(struct omap_usb_config *pdata) #if defined(CONFIG_ARCH_OMAP_OTG) || defined(CONFIG_ARCH_OMAP_OTG_MODULE) void omap2_usbfs_init(struct omap_usb_config *pdata); #else -static inline omap2_usbfs_init(struct omap_usb_config *pdata) +static inline void omap2_usbfs_init(struct omap_usb_config *pdata) { } #endif diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index e31496e35b0..ecbfe398a30 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -878,7 +878,7 @@ EXPORT_SYMBOL(omap_mcbsp_free); void omap_mcbsp_start(unsigned int id, int tx, int rx) { struct omap_mcbsp *mcbsp; - int idle; + int enable_srg = 0; u16 w; if (!omap_mcbsp_check_valid_id(id)) { @@ -893,10 +893,13 @@ void omap_mcbsp_start(unsigned int id, int tx, int rx) mcbsp->rx_word_length = (MCBSP_READ_CACHE(mcbsp, RCR1) >> 5) & 0x7; mcbsp->tx_word_length = (MCBSP_READ_CACHE(mcbsp, XCR1) >> 5) & 0x7; - idle = !((MCBSP_READ_CACHE(mcbsp, SPCR2) | - MCBSP_READ_CACHE(mcbsp, SPCR1)) & 1); + /* Only enable SRG, if McBSP is master */ + w = MCBSP_READ_CACHE(mcbsp, PCR0); + if (w & (FSXM | FSRM | CLKXM | CLKRM)) + enable_srg = !((MCBSP_READ_CACHE(mcbsp, SPCR2) | + MCBSP_READ_CACHE(mcbsp, SPCR1)) & 1); - if (idle) { + if (enable_srg) { /* Start the sample generator */ w = MCBSP_READ_CACHE(mcbsp, SPCR2); MCBSP_WRITE(mcbsp, SPCR2, w | (1 << 6)); @@ -919,7 +922,7 @@ void omap_mcbsp_start(unsigned int id, int tx, int rx) */ udelay(500); - if (idle) { + if (enable_srg) { /* Start frame sync */ w = MCBSP_READ_CACHE(mcbsp, SPCR2); MCBSP_WRITE(mcbsp, SPCR2, w | (1 << 7)); diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c index d2b160942cc..abe933cd8f0 100644 --- a/arch/arm/plat-omap/omap_device.c +++ b/arch/arm/plat-omap/omap_device.c @@ -82,6 +82,7 @@ #include <linux/slab.h> #include <linux/err.h> #include <linux/io.h> +#include <linux/clk.h> #include <plat/omap_device.h> #include <plat/omap_hwmod.h> @@ -90,12 +91,6 @@ #define USE_WAKEUP_LAT 0 #define IGNORE_WAKEUP_LAT 1 -/* - * OMAP_DEVICE_MAGIC: used to determine whether a struct omap_device - * obtained via container_of() is in fact a struct omap_device - */ -#define OMAP_DEVICE_MAGIC 0xf00dcafe - /* Private functions */ /** @@ -243,6 +238,44 @@ static inline struct omap_device *_find_by_pdev(struct platform_device *pdev) return container_of(pdev, struct omap_device, pdev); } +/** + * _add_optional_clock_alias - Add clock alias for hwmod optional clocks + * @od: struct omap_device *od + * + * For every optional clock present per hwmod per omap_device, this function + * adds an entry in the clocks list of the form <dev-id=dev_name, con-id=role> + * if an entry is already present in it with the form <dev-id=NULL, con-id=role> + * + * The function is called from inside omap_device_build_ss(), after + * omap_device_register. + * + * This allows drivers to get a pointer to its optional clocks based on its role + * by calling clk_get(<dev*>, <role>). + * + * No return value. + */ +static void _add_optional_clock_alias(struct omap_device *od, + struct omap_hwmod *oh) +{ + int i; + + for (i = 0; i < oh->opt_clks_cnt; i++) { + struct omap_hwmod_opt_clk *oc; + int r; + + oc = &oh->opt_clks[i]; + + if (!oc->_clk) + continue; + + r = clk_add_alias(oc->role, dev_name(&od->pdev.dev), + (char *)oc->clk, &od->pdev.dev); + if (r) + pr_err("omap_device: %s: clk_add_alias for %s failed\n", + dev_name(&od->pdev.dev), oc->role); + } +} + /* Public functions for use by core code */ @@ -257,12 +290,11 @@ static inline struct omap_device *_find_by_pdev(struct platform_device *pdev) */ int omap_device_count_resources(struct omap_device *od) { - struct omap_hwmod *oh; int c = 0; int i; - for (i = 0, oh = *od->hwmods; i < od->hwmods_cnt; i++, oh++) - c += omap_hwmod_count_resources(oh); + for (i = 0; i < od->hwmods_cnt; i++) + c += omap_hwmod_count_resources(od->hwmods[i]); pr_debug("omap_device: %s: counted %d total resources across %d " "hwmods\n", od->pdev.name, c, od->hwmods_cnt); @@ -289,12 +321,11 @@ int omap_device_count_resources(struct omap_device *od) */ int omap_device_fill_resources(struct omap_device *od, struct resource *res) { - struct omap_hwmod *oh; int c = 0; int i, r; - for (i = 0, oh = *od->hwmods; i < od->hwmods_cnt; i++, oh++) { - r = omap_hwmod_fill_resources(oh, res); + for (i = 0; i < od->hwmods_cnt; i++) { + r = omap_hwmod_fill_resources(od->hwmods[i], res); res += r; c += r; } @@ -414,15 +445,15 @@ struct omap_device *omap_device_build_ss(const char *pdev_name, int pdev_id, od->pm_lats = pm_lats; od->pm_lats_cnt = pm_lats_cnt; - od->magic = OMAP_DEVICE_MAGIC; - if (is_early_device) ret = omap_early_device_register(od); else ret = omap_device_register(od); - for (i = 0; i < oh_cnt; i++) + for (i = 0; i < oh_cnt; i++) { hwmods[i]->od = od; + _add_optional_clock_alias(od, hwmods[i]); + } if (ret) goto odbs_exit4; @@ -473,6 +504,7 @@ int omap_device_register(struct omap_device *od) { pr_debug("omap_device: %s: registering\n", od->pdev.name); + od->pdev.dev.parent = &omap_device_parent; return platform_device_register(&od->pdev); } @@ -566,7 +598,6 @@ int omap_device_shutdown(struct platform_device *pdev) { int ret, i; struct omap_device *od; - struct omap_hwmod *oh; od = _find_by_pdev(pdev); @@ -579,8 +610,8 @@ int omap_device_shutdown(struct platform_device *pdev) ret = _omap_device_deactivate(od, IGNORE_WAKEUP_LAT); - for (i = 0, oh = *od->hwmods; i < od->hwmods_cnt; i++, oh++) - omap_hwmod_shutdown(oh); + for (i = 0; i < od->hwmods_cnt; i++) + omap_hwmod_shutdown(od->hwmods[i]); od->_state = OMAP_DEVICE_STATE_SHUTDOWN; @@ -627,18 +658,6 @@ int omap_device_align_pm_lat(struct platform_device *pdev, } /** - * omap_device_is_valid - Check if pointer is a valid omap_device - * @od: struct omap_device * - * - * Return whether struct omap_device pointer @od points to a valid - * omap_device. - */ -bool omap_device_is_valid(struct omap_device *od) -{ - return (od && od->magic == OMAP_DEVICE_MAGIC); -} - -/** * omap_device_get_pwrdm - return the powerdomain * associated with @od * @od: struct omap_device * * @@ -692,11 +711,10 @@ void __iomem *omap_device_get_rt_va(struct omap_device *od) */ int omap_device_enable_hwmods(struct omap_device *od) { - struct omap_hwmod *oh; int i; - for (i = 0, oh = *od->hwmods; i < od->hwmods_cnt; i++, oh++) - omap_hwmod_enable(oh); + for (i = 0; i < od->hwmods_cnt; i++) + omap_hwmod_enable(od->hwmods[i]); /* XXX pass along return value here? */ return 0; @@ -710,11 +728,10 @@ int omap_device_enable_hwmods(struct omap_device *od) */ int omap_device_idle_hwmods(struct omap_device *od) { - struct omap_hwmod *oh; int i; - for (i = 0, oh = *od->hwmods; i < od->hwmods_cnt; i++, oh++) - omap_hwmod_idle(oh); + for (i = 0; i < od->hwmods_cnt; i++) + omap_hwmod_idle(od->hwmods[i]); /* XXX pass along return value here? */ return 0; @@ -729,11 +746,10 @@ int omap_device_idle_hwmods(struct omap_device *od) */ int omap_device_disable_clocks(struct omap_device *od) { - struct omap_hwmod *oh; int i; - for (i = 0, oh = *od->hwmods; i < od->hwmods_cnt; i++, oh++) - omap_hwmod_disable_clocks(oh); + for (i = 0; i < od->hwmods_cnt; i++) + omap_hwmod_disable_clocks(od->hwmods[i]); /* XXX pass along return value here? */ return 0; @@ -748,12 +764,22 @@ int omap_device_disable_clocks(struct omap_device *od) */ int omap_device_enable_clocks(struct omap_device *od) { - struct omap_hwmod *oh; int i; - for (i = 0, oh = *od->hwmods; i < od->hwmods_cnt; i++, oh++) - omap_hwmod_enable_clocks(oh); + for (i = 0; i < od->hwmods_cnt; i++) + omap_hwmod_enable_clocks(od->hwmods[i]); /* XXX pass along return value here? */ return 0; } + +struct device omap_device_parent = { + .init_name = "omap", + .parent = &platform_bus, +}; + +static int __init omap_device_init(void) +{ + return device_register(&omap_device_parent); +} +core_initcall(omap_device_init); diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 226b2e858d6..98c86ff1720 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -53,7 +53,7 @@ #define OMAP4_SRAM_PUB_PA (OMAP4_SRAM_PA + 0x4000) #define OMAP4_SRAM_PUB_VA (OMAP4_SRAM_VA + 0x4000) -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) +#if defined(CONFIG_ARCH_OMAP2PLUS) #define SRAM_BOOTLOADER_SZ 0x00 #else #define SRAM_BOOTLOADER_SZ 0x80 @@ -93,16 +93,7 @@ extern unsigned long omapfb_reserve_sram(unsigned long sram_pstart, */ static int is_sram_locked(void) { - int type = 0; - - if (cpu_is_omap44xx()) - /* Not yet supported */ - return 0; - - if (cpu_is_omap242x()) - type = omap_rev() & OMAP2_DEVICETYPE_MASK; - - if (type == GP_DEVICE) { + if (OMAP2_DEVICE_TYPE_GP == omap_type()) { /* RAMFW: R/W access to all initiators for all qualifier sets */ if (cpu_is_omap242x()) { __raw_writel(0xFF, OMAP24XX_VA_REQINFOPERM0); /* all q-vects */ |