summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/mach-at91/Kconfig2
-rw-r--r--arch/arm/mach-omap1/Kconfig2
-rw-r--r--arch/arm/mach-s3c2410/sleep.S2
-rw-r--r--arch/arm/plat-s3c24xx/sleep.S2
-rw-r--r--arch/cris/arch-v32/drivers/Kconfig2
-rw-r--r--arch/h8300/Kconfig.debug4
-rw-r--r--arch/i386/Kconfig4
-rw-r--r--arch/i386/Kconfig.cpu4
-rw-r--r--arch/i386/kernel/cpu/mcheck/therm_throt.c2
-rw-r--r--arch/ia64/Kconfig2
-rw-r--r--arch/m68knommu/Kconfig.debug2
-rw-r--r--arch/mips/Kconfig6
-rw-r--r--arch/mips/Makefile2
-rw-r--r--arch/mips/pci/fixup-sb1250.c4
-rw-r--r--arch/powerpc/Kconfig.debug2
-rw-r--r--arch/powerpc/oprofile/op_model_cell.c2
-rw-r--r--arch/powerpc/platforms/8xx/mpc86xads_setup.c2
-rw-r--r--arch/powerpc/platforms/8xx/mpc885ads_setup.c2
-rw-r--r--arch/powerpc/platforms/cell/io-workarounds.c2
-rw-r--r--arch/ppc/platforms/mpc866ads_setup.c2
-rw-r--r--arch/ppc/syslib/ipic.c2
-rw-r--r--arch/s390/crypto/Kconfig2
-rw-r--r--arch/sh/boards/se/7751/setup.c2
-rw-r--r--arch/sh/kernel/cpu/sh3/entry.S2
-rw-r--r--arch/sh/kernel/cpu/sh4a/clock-sh73180.c2
-rw-r--r--arch/sh/kernel/cpu/sh4a/clock-sh7343.c2
-rw-r--r--arch/sh/kernel/cpu/sh4a/clock-sh7770.c2
-rw-r--r--arch/sh/kernel/cpu/sh4a/clock-sh7780.c2
-rw-r--r--arch/sh/kernel/vsyscall/vsyscall.c2
-rw-r--r--arch/um/include/sysdep-i386/archsetjmp.h2
-rw-r--r--arch/um/include/sysdep-x86_64/archsetjmp.h2
-rw-r--r--arch/v850/kernel/entry.S2
-rw-r--r--arch/x86_64/kernel/io_apic.c2
-rw-r--r--arch/xtensa/kernel/pci-dma.c2
34 files changed, 40 insertions, 40 deletions
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index e238ad8cfd8..018d637f87f 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -107,7 +107,7 @@ config ARCH_AT91SAM9260_SAM9XE
depends on ARCH_AT91SAM9260
help
Select this if you are using Atmel's AT91SAM9XE System-on-Chip.
- They are basicaly AT91SAM9260s with various sizes of embedded Flash.
+ They are basically AT91SAM9260s with various sizes of embedded Flash.
comment "AT91SAM9260 / AT91SAM9XE Board Type"
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index 8781aaeb576..c7e229b00f6 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -84,7 +84,7 @@ config MACH_OMAP_PALMTE
Support for the Palm Tungsten E PDA. Currently only the LCD panel
is supported. To boot the kernel, you'll need a PalmOS compatible
bootloader; check out http://palmtelinux.sourceforge.net for more
- informations.
+ information.
Say Y here if you have such a PDA, say NO otherwise.
config MACH_NOKIA770
diff --git a/arch/arm/mach-s3c2410/sleep.S b/arch/arm/mach-s3c2410/sleep.S
index 637aaba6539..d1eeed2ad47 100644
--- a/arch/arm/mach-s3c2410/sleep.S
+++ b/arch/arm/mach-s3c2410/sleep.S
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/s3c2410-sleep.S
+/* linux/arch/arm/mach-s3c2410/sleep.S
*
* Copyright (c) 2004 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
diff --git a/arch/arm/plat-s3c24xx/sleep.S b/arch/arm/plat-s3c24xx/sleep.S
index 435349dc324..7b7ae790b00 100644
--- a/arch/arm/plat-s3c24xx/sleep.S
+++ b/arch/arm/plat-s3c24xx/sleep.S
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/sleep.S
+/* linux/arch/arm/plat-s3c24xx/sleep.S
*
* Copyright (c) 2004 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig
index f64624fc450..1d859c16931 100644
--- a/arch/cris/arch-v32/drivers/Kconfig
+++ b/arch/cris/arch-v32/drivers/Kconfig
@@ -603,7 +603,7 @@ config ETRAX_CARDBUS
select HOTPLUG
select PCCARD_NONSTATIC
help
- Enabled the ETRAX Carbus driver.
+ Enabled the ETRAX Cardbus driver.
config PCI
bool
diff --git a/arch/h8300/Kconfig.debug b/arch/h8300/Kconfig.debug
index e0e9bcb015a..554efe604a0 100644
--- a/arch/h8300/Kconfig.debug
+++ b/arch/h8300/Kconfig.debug
@@ -21,12 +21,12 @@ config GDB_MAGICPRINT
bool "Message Output for GDB MagicPrint service"
depends on (H8300H_SIM || H8S_SIM)
help
- kernel messages output useing MagicPrint service from GDB
+ kernel messages output using MagicPrint service from GDB
config SYSCALL_PRINT
bool "SystemCall trace print"
help
- outout history of systemcall
+ output history of systemcall
config GDB_DEBUG
bool "Use gdb stub"
diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig
index 64ad10f984a..30944ee2e61 100644
--- a/arch/i386/Kconfig
+++ b/arch/i386/Kconfig
@@ -858,9 +858,9 @@ config RELOCATABLE
bool "Build a relocatable kernel(EXPERIMENTAL)"
depends on EXPERIMENTAL
help
- This build a kernel image that retains relocation information
+ This builds a kernel image that retains relocation information
so it can be loaded someplace besides the default 1MB.
- The relocations tend to the kernel binary about 10% larger,
+ The relocations tend to make the kernel binary about 10% larger,
but are discarded at runtime.
One use is for the kexec on panic case where the recovery kernel
diff --git a/arch/i386/Kconfig.cpu b/arch/i386/Kconfig.cpu
index dce6124cb84..d7f6fb0b30f 100644
--- a/arch/i386/Kconfig.cpu
+++ b/arch/i386/Kconfig.cpu
@@ -108,7 +108,7 @@ config MCORE2
bool "Core 2/newer Xeon"
help
Select this for Intel Core 2 and newer Core 2 Xeons (Xeon 51xx and 53xx)
- CPUs. You can distingush newer from older Xeons by the CPU family
+ CPUs. You can distinguish newer from older Xeons by the CPU family
in /proc/cpuinfo. Newer ones have 6.
config MPENTIUM4
@@ -172,7 +172,7 @@ config MWINCHIP3D
help
Select this for an IDT Winchip-2A or 3. Linux and GCC
treat this chip as a 586TSC with some extended instructions
- and alignment reqirements. Also enable out of order memory
+ and alignment requirements. Also enable out of order memory
stores for this CPU, which can increase performance of some
operations.
diff --git a/arch/i386/kernel/cpu/mcheck/therm_throt.c b/arch/i386/kernel/cpu/mcheck/therm_throt.c
index 5b0a040213c..7ba7c3abd3a 100644
--- a/arch/i386/kernel/cpu/mcheck/therm_throt.c
+++ b/arch/i386/kernel/cpu/mcheck/therm_throt.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/i386/kerne/cpu/mcheck/therm_throt.c
+ * linux/arch/i386/kernel/cpu/mcheck/therm_throt.c
*
* Thermal throttle event support code (such as syslog messaging and rate
* limiting) that was factored out from x86_64 (mce_intel.c) and i386 (p4.c).
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index e23af4b6ae8..6e41471449c 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -468,7 +468,7 @@ config KEXEC
help
kexec is a system call that implements the ability to shutdown your
current kernel, and to start another kernel. It is like a reboot
- but it is indepedent of the system firmware. And like a reboot
+ but it is independent of the system firmware. And like a reboot
you can start any kernel with it, not just Linux.
The name comes from the similiarity to the exec system call.
diff --git a/arch/m68knommu/Kconfig.debug b/arch/m68knommu/Kconfig.debug
index 763c9aa0b4f..9ff47bd09ae 100644
--- a/arch/m68knommu/Kconfig.debug
+++ b/arch/m68knommu/Kconfig.debug
@@ -5,7 +5,7 @@ source "lib/Kconfig.debug"
config FULLDEBUG
bool "Full Symbolic/Source Debugging support"
help
- Enable debuging symbols on kernel build.
+ Enable debugging symbols on kernel build.
config HIGHPROFILE
bool "Use fast second timer for profiling"
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index b7cb048bc77..16ecea3c081 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -956,7 +956,7 @@ choice
byte order. These modes require different kernels and a different
Linux distribution. In general there is one preferred byteorder for a
particular system but some systems are just as commonly used in the
- one or the other endianess.
+ one or the other endianness.
config CPU_BIG_ENDIAN
bool "Big endian"
@@ -1750,7 +1750,7 @@ config ARCH_DISCONTIGMEM_ENABLE
bool
default y if SGI_IP27
help
- Say Y to upport efficient handling of discontiguous physical memory,
+ Say Y to support efficient handling of discontiguous physical memory,
for architectures which are either NUMA (Non-Uniform Memory Access)
or have huge holes in the physical address space for other reasons.
See <file:Documentation/vm/numa> for more.
@@ -1938,7 +1938,7 @@ config KEXEC
help
kexec is a system call that implements the ability to shutdown your
current kernel, and to start another kernel. It is like a reboot
- but it is indepedent of the system firmware. And like a reboot
+ but it is independent of the system firmware. And like a reboot
you can start any kernel with it, not just Linux.
The name comes from the similiarity to the exec system call.
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index f2f742df32c..4892db88a86 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -92,7 +92,7 @@ cflags-y += -ffreestanding
# when fed the toolchain default!
#
# Certain gcc versions upto gcc 4.1.1 (probably 4.2-subversion as of
-# 2006-10-10 don't properly change the the predefined symbols if -EB / -EL
+# 2006-10-10 don't properly change the predefined symbols if -EB / -EL
# are used, so we kludge that here. A bug has been filed at
# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=29413.
#
diff --git a/arch/mips/pci/fixup-sb1250.c b/arch/mips/pci/fixup-sb1250.c
index 7a7444874e8..0ad39e53f7b 100644
--- a/arch/mips/pci/fixup-sb1250.c
+++ b/arch/mips/pci/fixup-sb1250.c
@@ -14,7 +14,7 @@
#include <linux/pci.h>
/*
- * Set the the BCM1250, etc. PCI host bridge's TRDY timeout
+ * Set the BCM1250, etc. PCI host bridge's TRDY timeout
* to the finite max.
*/
static void __init quirk_sb1250_pci(struct pci_dev *dev)
@@ -35,7 +35,7 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SIBYTE, PCI_DEVICE_ID_BCM1250_HT,
quirk_sb1250_ht);
/*
- * Set the the SP1011 HT/PCI bridge's TRDY timeout to the finite max.
+ * Set the SP1011 HT/PCI bridge's TRDY timeout to the finite max.
*/
static void __init quirk_sp1011(struct pci_dev *dev)
{
diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
index f70e795c262..346cd3befe1 100644
--- a/arch/powerpc/Kconfig.debug
+++ b/arch/powerpc/Kconfig.debug
@@ -32,7 +32,7 @@ config HCALL_STATS
depends on PPC_PSERIES && DEBUG_FS
help
Adds code to keep track of the number of hypervisor calls made and
- the amount of time spent in hypervisor callsr. Wall time spent in
+ the amount of time spent in hypervisor calls. Wall time spent in
each call is always calculated, and if available CPU cycles spent
are also calculated. A directory named hcall_inst is added at the
root of the debugfs filesystem. Within the hcall_inst directory
diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c
index 626b29f3830..c29293befba 100644
--- a/arch/powerpc/oprofile/op_model_cell.c
+++ b/arch/powerpc/oprofile/op_model_cell.c
@@ -747,7 +747,7 @@ cell_handle_interrupt(struct pt_regs *regs, struct op_counter_config *ctr)
* counter value etc.) are not copied to the actual registers
* until the performance monitor is enabled. In order to get
* this to work as desired, the permormance monitor needs to
- * be disabled while writting to the latches. This is a
+ * be disabled while writing to the latches. This is a
* HW design issue.
*/
cbe_enable_pm(cpu);
diff --git a/arch/powerpc/platforms/8xx/mpc86xads_setup.c b/arch/powerpc/platforms/8xx/mpc86xads_setup.c
index a35315af5c5..cf0e7bc8c2e 100644
--- a/arch/powerpc/platforms/8xx/mpc86xads_setup.c
+++ b/arch/powerpc/platforms/8xx/mpc86xads_setup.c
@@ -1,4 +1,4 @@
-/*arch/ppc/platforms/mpc86xads-setup.c
+/*arch/powerpc/platforms/8xx/mpc86xads_setup.c
*
* Platform setup for the Freescale mpc86xads board
*
diff --git a/arch/powerpc/platforms/8xx/mpc885ads_setup.c b/arch/powerpc/platforms/8xx/mpc885ads_setup.c
index a57b57785ac..c36e475d93d 100644
--- a/arch/powerpc/platforms/8xx/mpc885ads_setup.c
+++ b/arch/powerpc/platforms/8xx/mpc885ads_setup.c
@@ -1,4 +1,4 @@
-/*arch/ppc/platforms/mpc885ads-setup.c
+/*arch/powerpc/platforms/8xx/mpc885ads_setup.c
*
* Platform setup for the Freescale mpc885ads board
*
diff --git a/arch/powerpc/platforms/cell/io-workarounds.c b/arch/powerpc/platforms/cell/io-workarounds.c
index d68d920eb2c..7fb92f23f38 100644
--- a/arch/powerpc/platforms/cell/io-workarounds.c
+++ b/arch/powerpc/platforms/cell/io-workarounds.c
@@ -74,7 +74,7 @@ static void spider_io_flush(const volatile void __iomem *addr)
/* Fast path if we have a non-0 token, it indicates which bus we
* are on.
*
- * If the token is 0, that means either the the ioremap was done
+ * If the token is 0, that means either that the ioremap was done
* before we initialized this layer, or it's a PIO operation. We
* fallback to a low path in this case. Hopefully, internal devices
* which are ioremap'ed early should use in_XX/out_XX functions
diff --git a/arch/ppc/platforms/mpc866ads_setup.c b/arch/ppc/platforms/mpc866ads_setup.c
index 7ce5364fdb3..bf72204125c 100644
--- a/arch/ppc/platforms/mpc866ads_setup.c
+++ b/arch/ppc/platforms/mpc866ads_setup.c
@@ -1,4 +1,4 @@
-/*arch/ppc/platforms/mpc866ads-setup.c
+/*arch/ppc/platforms/mpc866ads_setup.c
*
* Platform setup for the Freescale mpc866ads board
*
diff --git a/arch/ppc/syslib/ipic.c b/arch/ppc/syslib/ipic.c
index 10659c24b1b..9192777d0f7 100644
--- a/arch/ppc/syslib/ipic.c
+++ b/arch/ppc/syslib/ipic.c
@@ -1,5 +1,5 @@
/*
- * include/asm-ppc/ipic.c
+ * arch/ppc/syslib/ipic.c
*
* IPIC routines implementations.
*
diff --git a/arch/s390/crypto/Kconfig b/arch/s390/crypto/Kconfig
index 99ff9f08e4d..d1defbbfcd8 100644
--- a/arch/s390/crypto/Kconfig
+++ b/arch/s390/crypto/Kconfig
@@ -54,7 +54,7 @@ config S390_PRNG
default "m"
help
Select this option if you want to use the s390 pseudo random number
- generator. The PRNG is part of the cryptograhic processor functions
+ generator. The PRNG is part of the cryptographic processor functions
and uses triple-DES to generate secure random numbers like the
ANSI X9.17 standard. The PRNG is usable via the char device
/dev/prandom.
diff --git a/arch/sh/boards/se/7751/setup.c b/arch/sh/boards/se/7751/setup.c
index 770defed9c4..52c7bfa57c2 100644
--- a/arch/sh/boards/se/7751/setup.c
+++ b/arch/sh/boards/se/7751/setup.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/sh/kernel/setup_7751se.c
+ * linux/arch/sh/boards/se/7751/setup.c
*
* Copyright (C) 2000 Kazumoto Kojima
*
diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S
index f3e827f29a4..832c0b4a1e6 100644
--- a/arch/sh/kernel/cpu/sh3/entry.S
+++ b/arch/sh/kernel/cpu/sh3/entry.S
@@ -1,5 +1,5 @@
/*
- * arch/sh/kernel/entry.S
+ * arch/sh/kernel/cpu/sh3/entry.S
*
* Copyright (C) 1999, 2000, 2002 Niibe Yutaka
* Copyright (C) 2003 - 2006 Paul Mundt
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh73180.c b/arch/sh/kernel/cpu/sh4a/clock-sh73180.c
index 2fa5cb2ae68..6d5ba373a75 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh73180.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh73180.c
@@ -1,5 +1,5 @@
/*
- * arch/sh/kernel/cpu/sh4/clock-sh73180.c
+ * arch/sh/kernel/cpu/sh4a/clock-sh73180.c
*
* SH73180 support for the clock framework
*
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7343.c b/arch/sh/kernel/cpu/sh4a/clock-sh7343.c
index 1707a213f0c..7adc4f16e95 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7343.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7343.c
@@ -1,5 +1,5 @@
/*
- * arch/sh/kernel/cpu/sh4/clock-sh7343.c
+ * arch/sh/kernel/cpu/sh4a/clock-sh7343.c
*
* SH7343/SH7722 support for the clock framework
*
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7770.c b/arch/sh/kernel/cpu/sh4a/clock-sh7770.c
index c8694bac647..8e236062c72 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7770.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7770.c
@@ -1,5 +1,5 @@
/*
- * arch/sh/kernel/cpu/sh4/clock-sh7770.c
+ * arch/sh/kernel/cpu/sh4a/clock-sh7770.c
*
* SH7770 support for the clock framework
*
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7780.c b/arch/sh/kernel/cpu/sh4a/clock-sh7780.c
index 9e6a216750c..01f3da619d3 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7780.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7780.c
@@ -1,5 +1,5 @@
/*
- * arch/sh/kernel/cpu/sh4/clock-sh7780.c
+ * arch/sh/kernel/cpu/sh4a/clock-sh7780.c
*
* SH7780 support for the clock framework
*
diff --git a/arch/sh/kernel/vsyscall/vsyscall.c b/arch/sh/kernel/vsyscall/vsyscall.c
index 7b0f66f0331..e146bafcd14 100644
--- a/arch/sh/kernel/vsyscall/vsyscall.c
+++ b/arch/sh/kernel/vsyscall/vsyscall.c
@@ -1,5 +1,5 @@
/*
- * arch/sh/kernel/vsyscall.c
+ * arch/sh/kernel/vsyscall/vsyscall.c
*
* Copyright (C) 2006 Paul Mundt
*
diff --git a/arch/um/include/sysdep-i386/archsetjmp.h b/arch/um/include/sysdep-i386/archsetjmp.h
index 11bafab669e..0f312085ce1 100644
--- a/arch/um/include/sysdep-i386/archsetjmp.h
+++ b/arch/um/include/sysdep-i386/archsetjmp.h
@@ -1,5 +1,5 @@
/*
- * arch/i386/include/klibc/archsetjmp.h
+ * arch/um/include/sysdep-i386/archsetjmp.h
*/
#ifndef _KLIBC_ARCHSETJMP_H
diff --git a/arch/um/include/sysdep-x86_64/archsetjmp.h b/arch/um/include/sysdep-x86_64/archsetjmp.h
index 9a5e1a6ec80..2af8f12ca16 100644
--- a/arch/um/include/sysdep-x86_64/archsetjmp.h
+++ b/arch/um/include/sysdep-x86_64/archsetjmp.h
@@ -1,5 +1,5 @@
/*
- * arch/x86_64/include/klibc/archsetjmp.h
+ * arch/um/include/sysdep-x86_64/archsetjmp.h
*/
#ifndef _KLIBC_ARCHSETJMP_H
diff --git a/arch/v850/kernel/entry.S b/arch/v850/kernel/entry.S
index 8bc521ca081..e4327a8d6bc 100644
--- a/arch/v850/kernel/entry.S
+++ b/arch/v850/kernel/entry.S
@@ -523,7 +523,7 @@ END(ret_from_trap)
/* This the initial entry point for a new child thread, with an appropriate
- stack in place that makes it look the the child is in the middle of an
+ stack in place that makes it look that the child is in the middle of an
syscall. This function is actually `returned to' from switch_thread
(copy_thread makes ret_from_fork the return address in each new thread's
saved context). */
diff --git a/arch/x86_64/kernel/io_apic.c b/arch/x86_64/kernel/io_apic.c
index 4d582589fa8..d8bfe315471 100644
--- a/arch/x86_64/kernel/io_apic.c
+++ b/arch/x86_64/kernel/io_apic.c
@@ -1413,7 +1413,7 @@ static void ack_apic_level(unsigned int irq)
/*
* We must acknowledge the irq before we move it or the acknowledge will
- * not propogate properly.
+ * not propagate properly.
*/
ack_APIC_irq();
diff --git a/arch/xtensa/kernel/pci-dma.c b/arch/xtensa/kernel/pci-dma.c
index ca76f071666..f5319d78c87 100644
--- a/arch/xtensa/kernel/pci-dma.c
+++ b/arch/xtensa/kernel/pci-dma.c
@@ -1,5 +1,5 @@
/*
- * arch/xtensa/pci-dma.c
+ * arch/xtensa/kernel/pci-dma.c
*
* DMA coherent memory allocation.
*