diff options
Diffstat (limited to 'arch')
72 files changed, 3050 insertions, 2850 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 4cbc6d8de21..62b9677c39a 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -47,6 +47,8 @@ config MIPS_ALCHEMY select GENERIC_GPIO select ARCH_WANT_OPTIONAL_GPIOLIB select SYS_SUPPORTS_ZBOOT + select USB_ARCH_HAS_OHCI + select USB_ARCH_HAS_EHCI config AR7 bool "Texas Instruments AR7" @@ -206,6 +208,7 @@ config MACH_JZ4740 select SYS_HAS_EARLY_PRINTK select HAVE_PWM select HAVE_CLK + select GENERIC_IRQ_CHIP config LANTIQ bool "Lantiq based platforms" @@ -2092,7 +2095,7 @@ config NODES_SHIFT config HW_PERF_EVENTS bool "Enable hardware performance counter support for perf events" - depends on PERF_EVENTS && !MIPS_MT_SMTC && OPROFILE=n && CPU_MIPS32 + depends on PERF_EVENTS && !MIPS_MT_SMTC && OPROFILE=n && (CPU_MIPS32 || CPU_MIPS64 || CPU_R10000 || CPU_SB1 || CPU_CAVIUM_OCTEON) default y help Enable hardware performance counter support for perf events. If diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 53e3514ba10..9b4cb00407d 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -226,7 +226,7 @@ LDFLAGS += -m $(ld-emul) ifdef CONFIG_MIPS CHECKFLAGS += $(shell $(CC) $(KBUILD_CFLAGS) -dM -E -xc /dev/null | \ egrep -vw '__GNUC_(|MINOR_|PATCHLEVEL_)_' | \ - sed -e 's/^\#define /-D/' -e "s/ /='/" -e "s/$$/'/") + sed -e "s/^\#define /-D'/" -e "s/ /'='/" -e "s/$$/'/") ifdef CONFIG_64BIT CHECKFLAGS += -m64 endif @@ -295,7 +295,9 @@ endif install: $(Q)install -D -m 755 vmlinux $(INSTALL_PATH)/vmlinux-$(KERNELRELEASE) +ifdef CONFIG_SYS_SUPPORTS_ZBOOT $(Q)install -D -m 755 vmlinuz $(INSTALL_PATH)/vmlinuz-$(KERNELRELEASE) +endif $(Q)install -D -m 644 .config $(INSTALL_PATH)/config-$(KERNELRELEASE) $(Q)install -D -m 644 System.map $(INSTALL_PATH)/System.map-$(KERNELRELEASE) diff --git a/arch/mips/alchemy/Kconfig b/arch/mips/alchemy/Kconfig index 2ccfd4a135b..2a68be6a1b9 100644 --- a/arch/mips/alchemy/Kconfig +++ b/arch/mips/alchemy/Kconfig @@ -18,20 +18,20 @@ config MIPS_MTX1 bool "4G Systems MTX-1 board" select DMA_NONCOHERENT select HW_HAS_PCI - select SOC_AU1500 + select ALCHEMY_GPIOINT_AU1000 select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_HAS_EARLY_PRINTK config MIPS_BOSPORUS bool "Alchemy Bosporus board" - select SOC_AU1500 + select ALCHEMY_GPIOINT_AU1000 select DMA_NONCOHERENT select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_HAS_EARLY_PRINTK config MIPS_DB1000 bool "Alchemy DB1000 board" - select SOC_AU1000 + select ALCHEMY_GPIOINT_AU1000 select DMA_NONCOHERENT select HW_HAS_PCI select SYS_SUPPORTS_LITTLE_ENDIAN @@ -39,14 +39,14 @@ config MIPS_DB1000 config MIPS_DB1100 bool "Alchemy DB1100 board" - select SOC_AU1100 + select ALCHEMY_GPIOINT_AU1000 select DMA_NONCOHERENT select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_HAS_EARLY_PRINTK config MIPS_DB1200 bool "Alchemy DB1200 board" - select SOC_AU1200 + select ALCHEMY_GPIOINT_AU1000 select DMA_COHERENT select MIPS_DISABLE_OBSOLETE_IDE select SYS_SUPPORTS_LITTLE_ENDIAN @@ -54,7 +54,7 @@ config MIPS_DB1200 config MIPS_DB1500 bool "Alchemy DB1500 board" - select SOC_AU1500 + select ALCHEMY_GPIOINT_AU1000 select DMA_NONCOHERENT select HW_HAS_PCI select MIPS_DISABLE_OBSOLETE_IDE @@ -64,7 +64,7 @@ config MIPS_DB1500 config MIPS_DB1550 bool "Alchemy DB1550 board" - select SOC_AU1550 + select ALCHEMY_GPIOINT_AU1000 select HW_HAS_PCI select DMA_NONCOHERENT select MIPS_DISABLE_OBSOLETE_IDE @@ -74,13 +74,13 @@ config MIPS_DB1550 config MIPS_MIRAGE bool "Alchemy Mirage board" select DMA_NONCOHERENT - select SOC_AU1500 + select ALCHEMY_GPIOINT_AU1000 select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_HAS_EARLY_PRINTK config MIPS_PB1000 bool "Alchemy PB1000 board" - select SOC_AU1000 + select ALCHEMY_GPIOINT_AU1000 select DMA_NONCOHERENT select HW_HAS_PCI select SWAP_IO_SPACE @@ -89,7 +89,7 @@ config MIPS_PB1000 config MIPS_PB1100 bool "Alchemy PB1100 board" - select SOC_AU1100 + select ALCHEMY_GPIOINT_AU1000 select DMA_NONCOHERENT select HW_HAS_PCI select SWAP_IO_SPACE @@ -98,7 +98,7 @@ config MIPS_PB1100 config MIPS_PB1200 bool "Alchemy PB1200 board" - select SOC_AU1200 + select ALCHEMY_GPIOINT_AU1000 select DMA_NONCOHERENT select MIPS_DISABLE_OBSOLETE_IDE select SYS_SUPPORTS_LITTLE_ENDIAN @@ -106,7 +106,7 @@ config MIPS_PB1200 config MIPS_PB1500 bool "Alchemy PB1500 board" - select SOC_AU1500 + select ALCHEMY_GPIOINT_AU1000 select DMA_NONCOHERENT select HW_HAS_PCI select SYS_SUPPORTS_LITTLE_ENDIAN @@ -114,7 +114,7 @@ config MIPS_PB1500 config MIPS_PB1550 bool "Alchemy PB1550 board" - select SOC_AU1550 + select ALCHEMY_GPIOINT_AU1000 select DMA_NONCOHERENT select HW_HAS_PCI select MIPS_DISABLE_OBSOLETE_IDE @@ -124,13 +124,13 @@ config MIPS_PB1550 config MIPS_XXS1500 bool "MyCable XXS1500 board" select DMA_NONCOHERENT - select SOC_AU1500 + select ALCHEMY_GPIOINT_AU1000 select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_HAS_EARLY_PRINTK config MIPS_GPR bool "Trapeze ITS GPR board" - select SOC_AU1550 + select ALCHEMY_GPIOINT_AU1000 select HW_HAS_PCI select DMA_NONCOHERENT select MIPS_DISABLE_OBSOLETE_IDE @@ -138,23 +138,3 @@ config MIPS_GPR select SYS_HAS_EARLY_PRINTK endchoice - -config SOC_AU1000 - bool - select ALCHEMY_GPIOINT_AU1000 - -config SOC_AU1100 - bool - select ALCHEMY_GPIOINT_AU1000 - -config SOC_AU1500 - bool - select ALCHEMY_GPIOINT_AU1000 - -config SOC_AU1550 - bool - select ALCHEMY_GPIOINT_AU1000 - -config SOC_AU1200 - bool - select ALCHEMY_GPIOINT_AU1000 diff --git a/arch/mips/alchemy/common/Makefile b/arch/mips/alchemy/common/Makefile index 27811fe341d..811ece7b22e 100644 --- a/arch/mips/alchemy/common/Makefile +++ b/arch/mips/alchemy/common/Makefile @@ -12,9 +12,5 @@ obj-$(CONFIG_ALCHEMY_GPIOINT_AU1000) += irq.o # optional gpiolib support ifeq ($(CONFIG_ALCHEMY_GPIO_INDIRECT),) - ifeq ($(CONFIG_GPIOLIB),y) - obj-$(CONFIG_ALCHEMY_GPIOINT_AU1000) += gpiolib-au1000.o - endif + obj-$(CONFIG_GPIOLIB) += gpiolib.o endif - -obj-$(CONFIG_PCI) += pci.o diff --git a/arch/mips/alchemy/common/dbdma.c b/arch/mips/alchemy/common/dbdma.c index 3a5abb54d50..0e63ee487d6 100644 --- a/arch/mips/alchemy/common/dbdma.c +++ b/arch/mips/alchemy/common/dbdma.c @@ -40,8 +40,6 @@ #include <asm/mach-au1x00/au1000.h> #include <asm/mach-au1x00/au1xxx_dbdma.h> -#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) - /* * The Descriptor Based DMA supports up to 16 channels. * @@ -62,120 +60,96 @@ static dbdma_global_t *dbdma_gptr = (dbdma_global_t *)KSEG1ADDR(AU1550_DBDMA_CONF_PHYS_ADDR); static int dbdma_initialized; -static dbdev_tab_t dbdev_tab[] = { -#ifdef CONFIG_SOC_AU1550 +static dbdev_tab_t *dbdev_tab; + +static dbdev_tab_t au1550_dbdev_tab[] __initdata = { /* UARTS */ - { DSCR_CMD0_UART0_TX, DEV_FLAGS_OUT, 0, 8, 0x11100004, 0, 0 }, - { DSCR_CMD0_UART0_RX, DEV_FLAGS_IN, 0, 8, 0x11100000, 0, 0 }, - { DSCR_CMD0_UART3_TX, DEV_FLAGS_OUT, 0, 8, 0x11400004, 0, 0 }, - { DSCR_CMD0_UART3_RX, DEV_FLAGS_IN, 0, 8, 0x11400000, 0, 0 }, + { AU1550_DSCR_CMD0_UART0_TX, DEV_FLAGS_OUT, 0, 8, 0x11100004, 0, 0 }, + { AU1550_DSCR_CMD0_UART0_RX, DEV_FLAGS_IN, 0, 8, 0x11100000, 0, 0 }, + { AU1550_DSCR_CMD0_UART3_TX, DEV_FLAGS_OUT, 0, 8, 0x11400004, 0, 0 }, + { AU1550_DSCR_CMD0_UART3_RX, DEV_FLAGS_IN, 0, 8, 0x11400000, 0, 0 }, /* EXT DMA */ - { DSCR_CMD0_DMA_REQ0, 0, 0, 0, 0x00000000, 0, 0 }, - { DSCR_CMD0_DMA_REQ1, 0, 0, 0, 0x00000000, 0, 0 }, - { DSCR_CMD0_DMA_REQ2, 0, 0, 0, 0x00000000, 0, 0 }, - { DSCR_CMD0_DMA_REQ3, 0, 0, 0, 0x00000000, 0, 0 }, + { AU1550_DSCR_CMD0_DMA_REQ0, 0, 0, 0, 0x00000000, 0, 0 }, + { AU1550_DSCR_CMD0_DMA_REQ1, 0, 0, 0, 0x00000000, 0, 0 }, + { AU1550_DSCR_CMD0_DMA_REQ2, 0, 0, 0, 0x00000000, 0, 0 }, + { AU1550_DSCR_CMD0_DMA_REQ3, 0, 0, 0, 0x00000000, 0, 0 }, /* USB DEV */ - { DSCR_CMD0_USBDEV_RX0, DEV_FLAGS_IN, 4, 8, 0x10200000, 0, 0 }, - { DSCR_CMD0_USBDEV_TX0, DEV_FLAGS_OUT, 4, 8, 0x10200004, 0, 0 }, - { DSCR_CMD0_USBDEV_TX1, DEV_FLAGS_OUT, 4, 8, 0x10200008, 0, 0 }, - { DSCR_CMD0_USBDEV_TX2, DEV_FLAGS_OUT, 4, 8, 0x1020000c, 0, 0 }, - { DSCR_CMD0_USBDEV_RX3, DEV_FLAGS_IN, 4, 8, 0x10200010, 0, 0 }, - { DSCR_CMD0_USBDEV_RX4, DEV_FLAGS_IN, 4, 8, 0x10200014, 0, 0 }, - - /* PSC 0 */ - { DSCR_CMD0_PSC0_TX, DEV_FLAGS_OUT, 0, 0, 0x11a0001c, 0, 0 }, - { DSCR_CMD0_PSC0_RX, DEV_FLAGS_IN, 0, 0, 0x11a0001c, 0, 0 }, - - /* PSC 1 */ - { DSCR_CMD0_PSC1_TX, DEV_FLAGS_OUT, 0, 0, 0x11b0001c, 0, 0 }, - { DSCR_CMD0_PSC1_RX, DEV_FLAGS_IN, 0, 0, 0x11b0001c, 0, 0 }, - - /* PSC 2 */ - { DSCR_CMD0_PSC2_TX, DEV_FLAGS_OUT, 0, 0, 0x10a0001c, 0, 0 }, - { DSCR_CMD0_PSC2_RX, DEV_FLAGS_IN, 0, 0, 0x10a0001c, 0, 0 }, - - /* PSC 3 */ - { DSCR_CMD0_PSC3_TX, DEV_FLAGS_OUT, 0, 0, 0x10b0001c, 0, 0 }, - { DSCR_CMD0_PSC3_RX, DEV_FLAGS_IN, 0, 0, 0x10b0001c, 0, 0 }, - - { DSCR_CMD0_PCI_WRITE, 0, 0, 0, 0x00000000, 0, 0 }, /* PCI */ - { DSCR_CMD0_NAND_FLASH, 0, 0, 0, 0x00000000, 0, 0 }, /* NAND */ + { AU1550_DSCR_CMD0_USBDEV_RX0, DEV_FLAGS_IN, 4, 8, 0x10200000, 0, 0 }, + { AU1550_DSCR_CMD0_USBDEV_TX0, DEV_FLAGS_OUT, 4, 8, 0x10200004, 0, 0 }, + { AU1550_DSCR_CMD0_USBDEV_TX1, DEV_FLAGS_OUT, 4, 8, 0x10200008, 0, 0 }, + { AU1550_DSCR_CMD0_USBDEV_TX2, DEV_FLAGS_OUT, 4, 8, 0x1020000c, 0, 0 }, + { AU1550_DSCR_CMD0_USBDEV_RX3, DEV_FLAGS_IN, 4, 8, 0x10200010, 0, 0 }, + { AU1550_DSCR_CMD0_USBDEV_RX4, DEV_FLAGS_IN, 4, 8, 0x10200014, 0, 0 }, + + /* PSCs */ + { AU1550_DSCR_CMD0_PSC0_TX, DEV_FLAGS_OUT, 0, 0, 0x11a0001c, 0, 0 }, + { AU1550_DSCR_CMD0_PSC0_RX, DEV_FLAGS_IN, 0, 0, 0x11a0001c, 0, 0 }, + { AU1550_DSCR_CMD0_PSC1_TX, DEV_FLAGS_OUT, 0, 0, 0x11b0001c, 0, 0 }, + { AU1550_DSCR_CMD0_PSC1_RX, DEV_FLAGS_IN, 0, 0, 0x11b0001c, 0, 0 }, + { AU1550_DSCR_CMD0_PSC2_TX, DEV_FLAGS_OUT, 0, 0, 0x10a0001c, 0, 0 }, + { AU1550_DSCR_CMD0_PSC2_RX, DEV_FLAGS_IN, 0, 0, 0x10a0001c, 0, 0 }, + { AU1550_DSCR_CMD0_PSC3_TX, DEV_FLAGS_OUT, 0, 0, 0x10b0001c, 0, 0 }, + { AU1550_DSCR_CMD0_PSC3_RX, DEV_FLAGS_IN, 0, 0, 0x10b0001c, 0, 0 }, + + { AU1550_DSCR_CMD0_PCI_WRITE, 0, 0, 0, 0x00000000, 0, 0 }, /* PCI */ + { AU1550_DSCR_CMD0_NAND_FLASH, 0, 0, 0, 0x00000000, 0, 0 }, /* NAND */ /* MAC 0 */ - { DSCR_CMD0_MAC0_RX, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 }, - { DSCR_CMD0_MAC0_TX, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 }, + { AU1550_DSCR_CMD0_MAC0_RX, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 }, + { AU1550_DSCR_CMD0_MAC0_TX, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 }, /* MAC 1 */ - { DSCR_CMD0_MAC1_RX, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 }, - { DSCR_CMD0_MAC1_TX, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 }, - -#endif /* CONFIG_SOC_AU1550 */ + { AU1550_DSCR_CMD0_MAC1_RX, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 }, + { AU1550_DSCR_CMD0_MAC1_TX, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 }, -#ifdef CONFIG_SOC_AU1200 - { DSCR_CMD0_UART0_TX, DEV_FLAGS_OUT, 0, 8, 0x11100004, 0, 0 }, - { DSCR_CMD0_UART0_RX, DEV_FLAGS_IN, 0, 8, 0x11100000, 0, 0 }, - { DSCR_CMD0_UART1_TX, DEV_FLAGS_OUT, 0, 8, 0x11200004, 0, 0 }, - { DSCR_CMD0_UART1_RX, DEV_FLAGS_IN, 0, 8, 0x11200000, 0, 0 }, - - { DSCR_CMD0_DMA_REQ0, 0, 0, 0, 0x00000000, 0, 0 }, - { DSCR_CMD0_DMA_REQ1, 0, 0, 0, 0x00000000, 0, 0 }, + { DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, + { DSCR_CMD0_ALWAYS, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, +}; - { DSCR_CMD0_MAE_BE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, - { DSCR_CMD0_MAE_FE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, - { DSCR_CMD0_MAE_BOTH, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, - { DSCR_CMD0_LCD, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, +static dbdev_tab_t au1200_dbdev_tab[] __initdata = { + { AU1200_DSCR_CMD0_UART0_TX, DEV_FLAGS_OUT, 0, 8, 0x11100004, 0, 0 }, + { AU1200_DSCR_CMD0_UART0_RX, DEV_FLAGS_IN, 0, 8, 0x11100000, 0, 0 }, + { AU1200_DSCR_CMD0_UART1_TX, DEV_FLAGS_OUT, 0, 8, 0x11200004, 0, 0 }, + { AU1200_DSCR_CMD0_UART1_RX, DEV_FLAGS_IN, 0, 8, 0x11200000, 0, 0 }, - { DSCR_CMD0_SDMS_TX0, DEV_FLAGS_OUT, 4, 8, 0x10600000, 0, 0 }, - { DSCR_CMD0_SDMS_RX0, DEV_FLAGS_IN, 4, 8, 0x10600004, 0, 0 }, - { DSCR_CMD0_SDMS_TX1, DEV_FLAGS_OUT, 4, 8, 0x10680000, 0, 0 }, - { DSCR_CMD0_SDMS_RX1, DEV_FLAGS_IN, 4, 8, 0x10680004, 0, 0 }, + { AU1200_DSCR_CMD0_DMA_REQ0, 0, 0, 0, 0x00000000, 0, 0 }, + { AU1200_DSCR_CMD0_DMA_REQ1, 0, 0, 0, 0x00000000, 0, 0 }, - { DSCR_CMD0_AES_RX, DEV_FLAGS_IN , 4, 32, 0x10300008, 0, 0 }, - { DSCR_CMD0_AES_TX, DEV_FLAGS_OUT, 4, 32, 0x10300004, 0, 0 }, + { AU1200_DSCR_CMD0_MAE_BE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, + { AU1200_DSCR_CMD0_MAE_FE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, + { AU1200_DSCR_CMD0_MAE_BOTH, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, + { AU1200_DSCR_CMD0_LCD, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, - { DSCR_CMD0_PSC0_TX, DEV_FLAGS_OUT, 0, 16, 0x11a0001c, 0, 0 }, - { DSCR_CMD0_PSC0_RX, DEV_FLAGS_IN, 0, 16, 0x11a0001c, 0, 0 }, - { DSCR_CMD0_PSC0_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, + { AU1200_DSCR_CMD0_SDMS_TX0, DEV_FLAGS_OUT, 4, 8, 0x10600000, 0, 0 }, + { AU1200_DSCR_CMD0_SDMS_RX0, DEV_FLAGS_IN, 4, 8, 0x10600004, 0, 0 }, + { AU1200_DSCR_CMD0_SDMS_TX1, DEV_FLAGS_OUT, 4, 8, 0x10680000, 0, 0 }, + { AU1200_DSCR_CMD0_SDMS_RX1, DEV_FLAGS_IN, 4, 8, 0x10680004, 0, 0 }, - { DSCR_CMD0_PSC1_TX, DEV_FLAGS_OUT, 0, 16, 0x11b0001c, 0, 0 }, - { DSCR_CMD0_PSC1_RX, DEV_FLAGS_IN, 0, 16, 0x11b0001c, 0, 0 }, - { DSCR_CMD0_PSC1_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, + { AU1200_DSCR_CMD0_AES_RX, DEV_FLAGS_IN , 4, 32, 0x10300008, 0, 0 }, + { AU1200_DSCR_CMD0_AES_TX, DEV_FLAGS_OUT, 4, 32, 0x10300004, 0, 0 }, - { DSCR_CMD0_CIM_RXA, DEV_FLAGS_IN, 0, 32, 0x14004020, 0, 0 }, - { DSCR_CMD0_CIM_RXB, DEV_FLAGS_IN, 0, 32, 0x14004040, 0, 0 }, - { DSCR_CMD0_CIM_RXC, DEV_FLAGS_IN, 0, 32, 0x14004060, 0, 0 }, - { DSCR_CMD0_CIM_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, + { AU1200_DSCR_CMD0_PSC0_TX, DEV_FLAGS_OUT, 0, 16, 0x11a0001c, 0, 0 }, + { AU1200_DSCR_CMD0_PSC0_RX, DEV_FLAGS_IN, 0, 16, 0x11a0001c, 0, 0 }, + { AU1200_DSCR_CMD0_PSC0_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, + { AU1200_DSCR_CMD0_PSC1_TX, DEV_FLAGS_OUT, 0, 16, 0x11b0001c, 0, 0 }, + { AU1200_DSCR_CMD0_PSC1_RX, DEV_FLAGS_IN, 0, 16, 0x11b0001c, 0, 0 }, + { AU1200_DSCR_CMD0_PSC1_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, - { DSCR_CMD0_NAND_FLASH, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 }, + { AU1200_DSCR_CMD0_CIM_RXA, DEV_FLAGS_IN, 0, 32, 0x14004020, 0, 0 }, + { AU1200_DSCR_CMD0_CIM_RXB, DEV_FLAGS_IN, 0, 32, 0x14004040, 0, 0 }, + { AU1200_DSCR_CMD0_CIM_RXC, DEV_FLAGS_IN, 0, 32, 0x14004060, 0, 0 }, + { AU1200_DSCR_CMD0_CIM_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, -#endif /* CONFIG_SOC_AU1200 */ + { AU1200_DSCR_CMD0_NAND_FLASH, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 }, { DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, - { DSCR_CMD0_ALWAYS, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, - - /* Provide 16 user definable device types */ - { ~0, 0, 0, 0, 0, 0, 0 }, - { ~0, 0, 0, 0, 0, 0, 0 }, - { ~0, 0, 0, 0, 0, 0, 0 }, - { ~0, 0, 0, 0, 0, 0, 0 }, - { ~0, 0, 0, 0, 0, 0, 0 }, - { ~0, 0, 0, 0, 0, 0, 0 }, - { ~0, 0, 0, 0, 0, 0, 0 }, - { ~0, 0, 0, 0, 0, 0, 0 }, - { ~0, 0, 0, 0, 0, 0, 0 }, - { ~0, 0, 0, 0, 0, 0, 0 }, - { ~0, 0, 0, 0, 0, 0, 0 }, - { ~0, 0, 0, 0, 0, 0, 0 }, - { ~0, 0, 0, 0, 0, 0, 0 }, - { ~0, 0, 0, 0, 0, 0, 0 }, - { ~0, 0, 0, 0, 0, 0, 0 }, - { ~0, 0, 0, 0, 0, 0, 0 }, + { DSCR_CMD0_ALWAYS, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, }; -#define DBDEV_TAB_SIZE ARRAY_SIZE(dbdev_tab) - +/* 32 predefined plus 32 custom */ +#define DBDEV_TAB_SIZE 64 static chan_tab_t *chan_tab_ptr[NUM_DBDMA_CHANS]; @@ -1028,38 +1002,43 @@ static struct syscore_ops alchemy_dbdma_syscore_ops = { .resume = alchemy_dbdma_resume, }; -static int __init au1xxx_dbdma_init(void) +static int __init dbdma_setup(unsigned int irq, dbdev_tab_t *idtable) { - int irq_nr, ret; + int ret; + + dbdev_tab = kzalloc(sizeof(dbdev_tab_t) * DBDEV_TAB_SIZE, GFP_KERNEL); + if (!dbdev_tab) + return -ENOMEM; + + memcpy(dbdev_tab, idtable, 32 * sizeof(dbdev_tab_t)); + for (ret = 32; ret < DBDEV_TAB_SIZE; ret++) + dbdev_tab[ret].dev_id = ~0; dbdma_gptr->ddma_config = 0; dbdma_gptr->ddma_throttle = 0; dbdma_gptr->ddma_inten = 0xffff; au_sync(); - switch (alchemy_get_cputype()) { - case ALCHEMY_CPU_AU1550: - irq_nr = AU1550_DDMA_INT; - break; - case ALCHEMY_CPU_AU1200: - irq_nr = AU1200_DDMA_INT; - break; - default: - return -ENODEV; - } - - ret = request_irq(irq_nr, dbdma_interrupt, IRQF_DISABLED, - "Au1xxx dbdma", (void *)dbdma_gptr); + ret = request_irq(irq, dbdma_interrupt, IRQF_DISABLED, "dbdma", + (void *)dbdma_gptr); if (ret) printk(KERN_ERR "Cannot grab DBDMA interrupt!\n"); else { dbdma_initialized = 1; - printk(KERN_INFO "Alchemy DBDMA initialized\n"); register_syscore_ops(&alchemy_dbdma_syscore_ops); } return ret; } -subsys_initcall(au1xxx_dbdma_init); -#endif /* defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) */ +static int __init alchemy_dbdma_init(void) +{ + switch (alchemy_get_cputype()) { + case ALCHEMY_CPU_AU1550: + return dbdma_setup(AU1550_DDMA_INT, au1550_dbdev_tab); + case ALCHEMY_CPU_AU1200: + return dbdma_setup(AU1200_DDMA_INT, au1200_dbdev_tab); + } + return 0; +} +subsys_initcall(alchemy_dbdma_init); diff --git a/arch/mips/alchemy/common/dma.c b/arch/mips/alchemy/common/dma.c index 347980e79a8..9b624e2c0fc 100644 --- a/arch/mips/alchemy/common/dma.c +++ b/arch/mips/alchemy/common/dma.c @@ -40,8 +40,6 @@ #include <asm/mach-au1x00/au1000.h> #include <asm/mach-au1x00/au1000_dma.h> -#if defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1500) || \ - defined(CONFIG_SOC_AU1100) /* * A note on resource allocation: * @@ -88,12 +86,12 @@ static const struct dma_dev { { AU1000_AC97_PHYS_ADDR + 0x08, DMA_DW16 | DMA_DR }, /* AC97 RX c */ { AU1000_UART3_PHYS_ADDR + 0x04, DMA_DW8 | DMA_NC }, /* UART3_TX */ { AU1000_UART3_PHYS_ADDR + 0x00, DMA_DW8 | DMA_NC | DMA_DR }, /* UART3_RX */ - { AU1000_USBD_PHYS_ADDR + 0x00, DMA_DW8 | DMA_NC | DMA_DR }, /* EP0RD */ - { AU1000_USBD_PHYS_ADDR + 0x04, DMA_DW8 | DMA_NC }, /* EP0WR */ - { AU1000_USBD_PHYS_ADDR + 0x08, DMA_DW8 | DMA_NC }, /* EP2WR */ - { AU1000_USBD_PHYS_ADDR + 0x0c, DMA_DW8 | DMA_NC }, /* EP3WR */ - { AU1000_USBD_PHYS_ADDR + 0x10, DMA_DW8 | DMA_NC | DMA_DR }, /* EP4RD */ - { AU1000_USBD_PHYS_ADDR + 0x14, DMA_DW8 | DMA_NC | DMA_DR }, /* EP5RD */ + { AU1000_USB_UDC_PHYS_ADDR + 0x00, DMA_DW8 | DMA_NC | DMA_DR }, /* EP0RD */ + { AU1000_USB_UDC_PHYS_ADDR + 0x04, DMA_DW8 | DMA_NC }, /* EP0WR */ + { AU1000_USB_UDC_PHYS_ADDR + 0x08, DMA_DW8 | DMA_NC }, /* EP2WR */ + { AU1000_USB_UDC_PHYS_ADDR + 0x0c, DMA_DW8 | DMA_NC }, /* EP3WR */ + { AU1000_USB_UDC_PHYS_ADDR + 0x10, DMA_DW8 | DMA_NC | DMA_DR }, /* EP4RD */ + { AU1000_USB_UDC_PHYS_ADDR + 0x14, DMA_DW8 | DMA_NC | DMA_DR }, /* EP5RD */ /* on Au1500, these 2 are DMA_REQ2/3 (GPIO208/209) instead! */ { AU1000_I2S_PHYS_ADDR + 0x00, DMA_DW32 | DMA_NC}, /* I2S TX */ { AU1000_I2S_PHYS_ADDR + 0x00, DMA_DW32 | DMA_NC | DMA_DR}, /* I2S RX */ @@ -170,13 +168,13 @@ int request_au1000_dma(int dev_id, const char *dev_str, const struct dma_dev *dev; int i, ret; -#if defined(CONFIG_SOC_AU1100) - if (dev_id < 0 || dev_id >= (DMA_NUM_DEV + DMA_NUM_DEV_BANK2)) - return -EINVAL; -#else - if (dev_id < 0 || dev_id >= DMA_NUM_DEV) - return -EINVAL; -#endif + if (alchemy_get_cputype() == ALCHEMY_CPU_AU1100) { + if (dev_id < 0 || dev_id >= (DMA_NUM_DEV + DMA_NUM_DEV_BANK2)) + return -EINVAL; + } else { + if (dev_id < 0 || dev_id >= DMA_NUM_DEV) + return -EINVAL; + } for (i = 0; i < NUM_AU1000_DMA_CHANNELS; i++) if (au1000_dma_table[i].dev_id < 0) @@ -239,30 +237,28 @@ EXPORT_SYMBOL(free_au1000_dma); static int __init au1000_dma_init(void) { - int base, i; - - switch (alchemy_get_cputype()) { - case ALCHEMY_CPU_AU1000: - base = AU1000_DMA_INT_BASE; - break; - case ALCHEMY_CPU_AU1500: - base = AU1500_DMA_INT_BASE; - break; - case ALCHEMY_CPU_AU1100: - base = AU1100_DMA_INT_BASE; - break; - default: - goto out; - } - - for (i = 0; i < NUM_AU1000_DMA_CHANNELS; i++) - au1000_dma_table[i].irq = base + i; - - printk(KERN_INFO "Alchemy DMA initialized\n"); + int base, i; + + switch (alchemy_get_cputype()) { + case ALCHEMY_CPU_AU1000: + base = AU1000_DMA_INT_BASE; + break; + case ALCHEMY_CPU_AU1500: + base = AU1500_DMA_INT_BASE; + break; + case ALCHEMY_CPU_AU1100: + base = AU1100_DMA_INT_BASE; + break; + default: + goto out; + } + + for (i = 0; i < NUM_AU1000_DMA_CHANNELS; i++) + au1000_dma_table[i].irq = base + i; + + printk(KERN_INFO "Alchemy DMA initialized\n"); out: - return 0; + return 0; } arch_initcall(au1000_dma_init); - -#endif /* AU1000 AU1500 AU1100 */ diff --git a/arch/mips/alchemy/common/gpiolib-au1000.c b/arch/mips/alchemy/common/gpiolib.c index c8e1a94d4a9..91fb4d9e30f 100644 --- a/arch/mips/alchemy/common/gpiolib-au1000.c +++ b/arch/mips/alchemy/common/gpiolib.c @@ -1,6 +1,6 @@ /* * Copyright (C) 2007-2009, OpenWrt.org, Florian Fainelli <florian@openwrt.org> - * GPIOLIB support for Au1000, Au1500, Au1100, Au1550 and Au12x0. + * GPIOLIB support for Alchemy chips. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -23,18 +23,18 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. * * Notes : - * au1000 SoC have only one GPIO block : GPIO1 - * Au1100, Au15x0, Au12x0 have a second one : GPIO2 + * This file must ONLY be built when CONFIG_GPIOLIB=y and + * CONFIG_ALCHEMY_GPIO_INDIRECT=n, otherwise compilation will fail! + * au1000 SoC have only one GPIO block : GPIO1 + * Au1100, Au15x0, Au12x0 have a second one : GPIO2 */ +#include <linux/init.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/types.h> -#include <linux/platform_device.h> #include <linux/gpio.h> - -#include <asm/mach-au1x00/au1000.h> -#include <asm/mach-au1x00/gpio.h> +#include <asm/mach-au1x00/gpio-au1000.h> static int gpio2_get(struct gpio_chip *chip, unsigned offset) { @@ -115,12 +115,19 @@ struct gpio_chip alchemy_gpio_chip[] = { }, }; -static int __init alchemy_gpiolib_init(void) +static int __init alchemy_gpiochip_init(void) { - gpiochip_add(&alchemy_gpio_chip[0]); - if (alchemy_get_cputype() != ALCHEMY_CPU_AU1000) - gpiochip_add(&alchemy_gpio_chip[1]); - - return 0; + int ret = 0; + + switch (alchemy_get_cputype()) { + case ALCHEMY_CPU_AU1000: + ret = gpiochip_add(&alchemy_gpio_chip[0]); + break; + case ALCHEMY_CPU_AU1500...ALCHEMY_CPU_AU1200: + ret = gpiochip_add(&alchemy_gpio_chip[0]); + ret |= gpiochip_add(&alchemy_gpio_chip[1]); + break; + } + return ret; } -arch_initcall(alchemy_gpiolib_init); +arch_initcall(alchemy_gpiochip_init); diff --git a/arch/mips/alchemy/common/pci.c b/arch/mips/alchemy/common/pci.c deleted file mode 100644 index 7866cf50cf9..00000000000 --- a/arch/mips/alchemy/common/pci.c +++ /dev/null @@ -1,104 +0,0 @@ -/* - * BRIEF MODULE DESCRIPTION - * Alchemy/AMD Au1x00 PCI support. - * - * Copyright 2001-2003, 2007-2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. <source@mvista.com> - * - * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org) - * - * Support for all devices (greater than 16) added by David Gathright. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/pci.h> -#include <linux/kernel.h> -#include <linux/init.h> - -#include <asm/mach-au1x00/au1000.h> - -/* TBD */ -static struct resource pci_io_resource = { - .start = PCI_IO_START, - .end = PCI_IO_END, - .name = "PCI IO space", - .flags = IORESOURCE_IO -}; - -static struct resource pci_mem_resource = { - .start = PCI_MEM_START, - .end = PCI_MEM_END, - .name = "PCI memory space", - .flags = IORESOURCE_MEM -}; - -extern struct pci_ops au1x_pci_ops; - -static struct pci_controller au1x_controller = { - .pci_ops = &au1x_pci_ops, - .io_resource = &pci_io_resource, - .mem_resource = &pci_mem_resource, -}; - -#if defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550) -static unsigned long virt_io_addr; -#endif - -static int __init au1x_pci_setup(void) -{ - extern void au1x_pci_cfg_init(void); - -#if defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550) - virt_io_addr = (unsigned long)ioremap(Au1500_PCI_IO_START, - Au1500_PCI_IO_END - Au1500_PCI_IO_START + 1); - - if (!virt_io_addr) { - printk(KERN_ERR "Unable to ioremap pci space\n"); - return 1; - } - au1x_controller.io_map_base = virt_io_addr; - -#ifdef CONFIG_DMA_NONCOHERENT - { - /* - * Set the NC bit in controller for Au1500 pre-AC silicon - */ - u32 prid = read_c0_prid(); - - if ((prid & 0xFF000000) == 0x01000000 && prid < 0x01030202) { - au_writel((1 << 16) | au_readl(Au1500_PCI_CFG), - Au1500_PCI_CFG); - printk(KERN_INFO "Non-coherent PCI accesses enabled\n"); - } - } -#endif - - set_io_port_base(virt_io_addr); -#endif - - au1x_pci_cfg_init(); - - register_pci_controller(&au1x_controller); - return 0; -} - -arch_initcall(au1x_pci_setup); diff --git a/arch/mips/alchemy/common/platform.c b/arch/mips/alchemy/common/platform.c index f72c48d4804..c8e5d72a582 100644 --- a/arch/mips/alchemy/common/platform.c +++ b/arch/mips/alchemy/common/platform.c @@ -18,7 +18,7 @@ #include <linux/serial_8250.h> #include <linux/slab.h> -#include <asm/mach-au1x00/au1xxx.h> +#include <asm/mach-au1x00/au1000.h> #include <asm/mach-au1x00/au1xxx_dbdma.h> #include <asm/mach-au1x00/au1100_mmc.h> #include <asm/mach-au1x00/au1xxx_eth.h> @@ -111,270 +111,87 @@ static void __init alchemy_setup_uarts(int ctype) printk(KERN_INFO "Alchemy: failed to register UARTs\n"); } -/* OHCI (USB full speed host controller) */ -static struct resource au1xxx_usb_ohci_resources[] = { - [0] = { - .start = USB_OHCI_BASE, - .end = USB_OHCI_BASE + USB_OHCI_LEN - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = FOR_PLATFORM_C_USB_HOST_INT, - .end = FOR_PLATFORM_C_USB_HOST_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -/* The dmamask must be set for OHCI to work */ -static u64 ohci_dmamask = DMA_BIT_MASK(32); - -static struct platform_device au1xxx_usb_ohci_device = { - .name = "au1xxx-ohci", - .id = 0, - .dev = { - .dma_mask = &ohci_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .num_resources = ARRAY_SIZE(au1xxx_usb_ohci_resources), - .resource = au1xxx_usb_ohci_resources, -}; - -/*** AU1100 LCD controller ***/ - -#ifdef CONFIG_FB_AU1100 -static struct resource au1100_lcd_resources[] = { - [0] = { - .start = LCD_PHYS_ADDR, - .end = LCD_PHYS_ADDR + 0x800 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AU1100_LCD_INT, - .end = AU1100_LCD_INT, - .flags = IORESOURCE_IRQ, - } -}; - -static u64 au1100_lcd_dmamask = DMA_BIT_MASK(32); - -static struct platform_device au1100_lcd_device = { - .name = "au1100-lcd", - .id = 0, - .dev = { - .dma_mask = &au1100_lcd_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .num_resources = ARRAY_SIZE(au1100_lcd_resources), - .resource = au1100_lcd_resources, -}; -#endif - -#ifdef CONFIG_SOC_AU1200 -/* EHCI (USB high speed host controller) */ -static struct resource au1xxx_usb_ehci_resources[] = { - [0] = { - .start = USB_EHCI_BASE, - .end = USB_EHCI_BASE + USB_EHCI_LEN - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AU1200_USB_INT, - .end = AU1200_USB_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 ehci_dmamask = DMA_BIT_MASK(32); - -static struct platform_device au1xxx_usb_ehci_device = { - .name = "au1xxx-ehci", - .id = 0, - .dev = { - .dma_mask = &ehci_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .num_resources = ARRAY_SIZE(au1xxx_usb_ehci_resources), - .resource = au1xxx_usb_ehci_resources, -}; - -/* Au1200 UDC (USB gadget controller) */ -static struct resource au1xxx_usb_gdt_resources[] = { - [0] = { - .start = USB_UDC_BASE, - .end = USB_UDC_BASE + USB_UDC_LEN - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AU1200_USB_INT, - .end = AU1200_USB_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 udc_dmamask = DMA_BIT_MASK(32); -static struct platform_device au1xxx_usb_gdt_device = { - .name = "au1xxx-udc", - .id = 0, - .dev = { - .dma_mask = &udc_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .num_resources = ARRAY_SIZE(au1xxx_usb_gdt_resources), - .resource = au1xxx_usb_gdt_resources, -}; +/* The dmamask must be set for OHCI/EHCI to work */ +static u64 alchemy_ohci_dmamask = DMA_BIT_MASK(32); +static u64 __maybe_unused alchemy_ehci_dmamask = DMA_BIT_MASK(32); -/* Au1200 UOC (USB OTG controller) */ -static struct resource au1xxx_usb_otg_resources[] = { - [0] = { - .start = USB_UOC_BASE, - .end = USB_UOC_BASE + USB_UOC_LEN - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AU1200_USB_INT, - .end = AU1200_USB_INT, - .flags = IORESOURCE_IRQ, - }, +static unsigned long alchemy_ohci_data[][2] __initdata = { + [ALCHEMY_CPU_AU1000] = { AU1000_USB_OHCI_PHYS_ADDR, AU1000_USB_HOST_INT }, + [ALCHEMY_CPU_AU1500] = { AU1000_USB_OHCI_PHYS_ADDR, AU1500_USB_HOST_INT }, + [ALCHEMY_CPU_AU1100] = { AU1000_USB_OHCI_PHYS_ADDR, AU1100_USB_HOST_INT }, + [ALCHEMY_CPU_AU1550] = { AU1550_USB_OHCI_PHYS_ADDR, AU1550_USB_HOST_INT }, + [ALCHEMY_CPU_AU1200] = { AU1200_USB_OHCI_PHYS_ADDR, AU1200_USB_INT }, }; -static u64 uoc_dmamask = DMA_BIT_MASK(32); - -static struct platform_device au1xxx_usb_otg_device = { - .name = "au1xxx-uoc", - .id = 0, - .dev = { - .dma_mask = &uoc_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .num_resources = ARRAY_SIZE(au1xxx_usb_otg_resources), - .resource = au1xxx_usb_otg_resources, +static unsigned long alchemy_ehci_data[][2] __initdata = { + [ALCHEMY_CPU_AU1200] = { AU1200_USB_EHCI_PHYS_ADDR, AU1200_USB_INT }, }; -static struct resource au1200_lcd_resources[] = { - [0] = { - .start = LCD_PHYS_ADDR, - .end = LCD_PHYS_ADDR + 0x800 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AU1200_LCD_INT, - .end = AU1200_LCD_INT, - .flags = IORESOURCE_IRQ, +static int __init _new_usbres(struct resource **r, struct platform_device **d) +{ + *r = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL); + if (!*r) + return -ENOMEM; + *d = kzalloc(sizeof(struct platform_device), GFP_KERNEL); + if (!*d) { + kfree(*r); + return -ENOMEM; } -}; - -static u64 au1200_lcd_dmamask = DMA_BIT_MASK(32); - -static struct platform_device au1200_lcd_device = { - .name = "au1200-lcd", - .id = 0, - .dev = { - .dma_mask = &au1200_lcd_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .num_resources = ARRAY_SIZE(au1200_lcd_resources), - .resource = au1200_lcd_resources, -}; -static u64 au1xxx_mmc_dmamask = DMA_BIT_MASK(32); + (*d)->dev.coherent_dma_mask = DMA_BIT_MASK(32); + (*d)->num_resources = 2; + (*d)->resource = *r; -extern struct au1xmmc_platform_data au1xmmc_platdata[2]; + return 0; +} -static struct resource au1200_mmc0_resources[] = { - [0] = { - .start = AU1100_SD0_PHYS_ADDR, - .end = AU1100_SD0_PHYS_ADDR + 0xfff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AU1200_SD_INT, - .end = AU1200_SD_INT, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = DSCR_CMD0_SDMS_TX0, - .end = DSCR_CMD0_SDMS_TX0, - .flags = IORESOURCE_DMA, - }, - [3] = { - .start = DSCR_CMD0_SDMS_RX0, - .end = DSCR_CMD0_SDMS_RX0, - .flags = IORESOURCE_DMA, - } -}; +static void __init alchemy_setup_usb(int ctype) +{ + struct resource *res; + struct platform_device *pdev; -static struct platform_device au1200_mmc0_device = { - .name = "au1xxx-mmc", - .id = 0, - .dev = { - .dma_mask = &au1xxx_mmc_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &au1xmmc_platdata[0], - }, - .num_resources = ARRAY_SIZE(au1200_mmc0_resources), - .resource = au1200_mmc0_resources, -}; + /* setup OHCI0. Every variant has one */ + if (_new_usbres(&res, &pdev)) + return; -#ifndef CONFIG_MIPS_DB1200 -static struct resource au1200_mmc1_resources[] = { - [0] = { - .start = AU1100_SD1_PHYS_ADDR, - .end = AU1100_SD1_PHYS_ADDR + 0xfff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AU1200_SD_INT, - .end = AU1200_SD_INT, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = DSCR_CMD0_SDMS_TX1, - .end = DSCR_CMD0_SDMS_TX1, - .flags = IORESOURCE_DMA, - }, - [3] = { - .start = DSCR_CMD0_SDMS_RX1, - .end = DSCR_CMD0_SDMS_RX1, - .flags = IORESOURCE_DMA, + res[0].start = alchemy_ohci_data[ctype][0]; + res[0].end = res[0].start + 0x100 - 1; + res[0].flags = IORESOURCE_MEM; + res[1].start = alchemy_ohci_data[ctype][1]; + res[1].end = res[1].start; + res[1].flags = IORESOURCE_IRQ; + pdev->name = "au1xxx-ohci"; + pdev->id = 0; + pdev->dev.dma_mask = &alchemy_ohci_dmamask; + + if (platform_device_register(pdev)) + printk(KERN_INFO "Alchemy USB: cannot add OHCI0\n"); + + + /* setup EHCI0: Au1200 */ + if (ctype == ALCHEMY_CPU_AU1200) { + if (_new_usbres(&res, &pdev)) + return; + + res[0].start = alchemy_ehci_data[ctype][0]; + res[0].end = res[0].start + 0x100 - 1; + res[0].flags = IORESOURCE_MEM; + res[1].start = alchemy_ehci_data[ctype][1]; + res[1].end = res[1].start; + res[1].flags = IORESOURCE_IRQ; + pdev->name = "au1xxx-ehci"; + pdev->id = 0; + pdev->dev.dma_mask = &alchemy_ehci_dmamask; + + if (platform_device_register(pdev)) + printk(KERN_INFO "Alchemy USB: cannot add EHCI0\n"); } -}; - -static struct platform_device au1200_mmc1_device = { - .name = "au1xxx-mmc", - .id = 1, - .dev = { - .dma_mask = &au1xxx_mmc_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &au1xmmc_platdata[1], - }, - .num_resources = ARRAY_SIZE(au1200_mmc1_resources), - .resource = au1200_mmc1_resources, -}; -#endif /* #ifndef CONFIG_MIPS_DB1200 */ -#endif /* #ifdef CONFIG_SOC_AU1200 */ - -/* All Alchemy demoboards with I2C have this #define in their headers */ -#ifdef SMBUS_PSC_BASE -static struct resource pbdb_smbus_resources[] = { - { - .start = CPHYSADDR(SMBUS_PSC_BASE), - .end = CPHYSADDR(SMBUS_PSC_BASE + 0xfffff), - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device pbdb_smbus_device = { - .name = "au1xpsc_smbus", - .id = 0, /* bus number */ - .num_resources = ARRAY_SIZE(pbdb_smbus_resources), - .resource = pbdb_smbus_resources, -}; -#endif +} /* Macro to help defining the Ethernet MAC resources */ -#define MAC_RES_COUNT 3 /* MAC regs base, MAC enable reg, MAC INT */ -#define MAC_RES(_base, _enable, _irq) \ +#define MAC_RES_COUNT 4 /* MAC regs, MAC en, MAC INT, MACDMA regs */ +#define MAC_RES(_base, _enable, _irq, _macdma) \ { \ .start = _base, \ .end = _base + 0xffff, \ @@ -389,28 +206,37 @@ static struct platform_device pbdb_smbus_device = { .start = _irq, \ .end = _irq, \ .flags = IORESOURCE_IRQ \ + }, \ + { \ + .start = _macdma, \ + .end = _macdma + 0x1ff, \ + .flags = IORESOURCE_MEM, \ } static struct resource au1xxx_eth0_resources[][MAC_RES_COUNT] __initdata = { [ALCHEMY_CPU_AU1000] = { MAC_RES(AU1000_MAC0_PHYS_ADDR, AU1000_MACEN_PHYS_ADDR, - AU1000_MAC0_DMA_INT) + AU1000_MAC0_DMA_INT, + AU1000_MACDMA0_PHYS_ADDR) }, [ALCHEMY_CPU_AU1500] = { MAC_RES(AU1500_MAC0_PHYS_ADDR, AU1500_MACEN_PHYS_ADDR, - AU1500_MAC0_DMA_INT) + AU1500_MAC0_DMA_INT, + AU1000_MACDMA0_PHYS_ADDR) }, [ALCHEMY_CPU_AU1100] = { MAC_RES(AU1000_MAC0_PHYS_ADDR, AU1000_MACEN_PHYS_ADDR, - AU1100_MAC0_DMA_INT) + AU1100_MAC0_DMA_INT, + AU1000_MACDMA0_PHYS_ADDR) }, [ALCHEMY_CPU_AU1550] = { MAC_RES(AU1000_MAC0_PHYS_ADDR, AU1000_MACEN_PHYS_ADDR, - AU1550_MAC0_DMA_INT) + AU1550_MAC0_DMA_INT, + AU1000_MACDMA0_PHYS_ADDR) }, }; @@ -429,17 +255,20 @@ static struct resource au1xxx_eth1_resources[][MAC_RES_COUNT] __initdata = { [ALCHEMY_CPU_AU1000] = { MAC_RES(AU1000_MAC1_PHYS_ADDR, AU1000_MACEN_PHYS_ADDR + 4, - AU1000_MAC1_DMA_INT) + AU1000_MAC1_DMA_INT, + AU1000_MACDMA1_PHYS_ADDR) }, [ALCHEMY_CPU_AU1500] = { MAC_RES(AU1500_MAC1_PHYS_ADDR, AU1500_MACEN_PHYS_ADDR + 4, - AU1500_MAC1_DMA_INT) + AU1500_MAC1_DMA_INT, + AU1000_MACDMA1_PHYS_ADDR) }, [ALCHEMY_CPU_AU1550] = { MAC_RES(AU1000_MAC1_PHYS_ADDR, AU1000_MACEN_PHYS_ADDR + 4, - AU1550_MAC1_DMA_INT) + AU1550_MAC1_DMA_INT, + AU1000_MACDMA1_PHYS_ADDR) }, }; @@ -521,36 +350,15 @@ static void __init alchemy_setup_macs(int ctype) } } -static struct platform_device *au1xxx_platform_devices[] __initdata = { - &au1xxx_usb_ohci_device, -#ifdef CONFIG_FB_AU1100 - &au1100_lcd_device, -#endif -#ifdef CONFIG_SOC_AU1200 - &au1xxx_usb_ehci_device, - &au1xxx_usb_gdt_device, - &au1xxx_usb_otg_device, - &au1200_lcd_device, - &au1200_mmc0_device, -#ifndef CONFIG_MIPS_DB1200 - &au1200_mmc1_device, -#endif -#endif -#ifdef SMBUS_PSC_BASE - &pbdb_smbus_device, -#endif -}; - static int __init au1xxx_platform_init(void) { - int err, ctype = alchemy_get_cputype(); + int ctype = alchemy_get_cputype(); alchemy_setup_uarts(ctype); alchemy_setup_macs(ctype); + alchemy_setup_usb(ctype); - err = platform_add_devices(au1xxx_platform_devices, - ARRAY_SIZE(au1xxx_platform_devices)); - return err; + return 0; } arch_initcall(au1xxx_platform_init); diff --git a/arch/mips/alchemy/common/power.c b/arch/mips/alchemy/common/power.c index b86324a4260..bdd6651e9a4 100644 --- a/arch/mips/alchemy/common/power.c +++ b/arch/mips/alchemy/common/power.c @@ -37,8 +37,6 @@ #include <asm/uaccess.h> #include <asm/mach-au1x00/au1000.h> -#ifdef CONFIG_PM - /* * We need to save/restore a bunch of core registers that are * either volatile or reset to some state across a processor sleep. @@ -49,7 +47,6 @@ * We only have to save/restore registers that aren't otherwise * done as part of a driver pm_* function. */ -static unsigned int sleep_usb[2]; static unsigned int sleep_sys_clocks[5]; static unsigned int sleep_sys_pinfunc; static unsigned int sleep_static_memctlr[4][3]; @@ -57,31 +54,6 @@ static unsigned int sleep_static_memctlr[4][3]; static void save_core_regs(void) { -#ifndef CONFIG_SOC_AU1200 - /* Shutdown USB host/device. */ - sleep_usb[0] = au_readl(USB_HOST_CONFIG); - - /* There appears to be some undocumented reset register.... */ - au_writel(0, 0xb0100004); - au_sync(); - au_writel(0, USB_HOST_CONFIG); - au_sync(); - - sleep_usb[1] = au_readl(USBD_ENABLE); - au_writel(0, USBD_ENABLE); - au_sync(); - -#else /* AU1200 */ - - /* enable access to OTG mmio so we can save OTG CAP/MUX. - * FIXME: write an OTG driver and move this stuff there! - */ - au_writel(au_readl(USB_MSR_BASE + 4) | (1 << 6), USB_MSR_BASE + 4); - au_sync(); - sleep_usb[0] = au_readl(0xb4020020); /* OTG_CAP */ - sleep_usb[1] = au_readl(0xb4020024); /* OTG_MUX */ -#endif - /* Clocks and PLLs. */ sleep_sys_clocks[0] = au_readl(SYS_FREQCTRL0); sleep_sys_clocks[1] = au_readl(SYS_FREQCTRL1); @@ -125,22 +97,6 @@ static void restore_core_regs(void) au_writel(sleep_sys_pinfunc, SYS_PINFUNC); au_sync(); -#ifndef CONFIG_SOC_AU1200 - au_writel(sleep_usb[0], USB_HOST_CONFIG); - au_writel(sleep_usb[1], USBD_ENABLE); - au_sync(); -#else - /* enable access to OTG memory */ - au_writel(au_readl(USB_MSR_BASE + 4) | (1 << 6), USB_MSR_BASE + 4); - au_sync(); - - /* restore OTG caps and port mux. */ - au_writel(sleep_usb[0], 0xb4020020 + 0); /* OTG_CAP */ - au_sync(); - au_writel(sleep_usb[1], 0xb4020020 + 4); /* OTG_MUX */ - au_sync(); -#endif - /* Restore the static memory controller configuration. */ au_writel(sleep_static_memctlr[0][0], MEM_STCFG0); au_writel(sleep_static_memctlr[0][1], MEM_STTIME0); @@ -174,5 +130,3 @@ void au_sleep(void) restore_core_regs(); } - -#endif /* CONFIG_PM */ diff --git a/arch/mips/alchemy/common/setup.c b/arch/mips/alchemy/common/setup.c index 1b887c86841..37ffd997c61 100644 --- a/arch/mips/alchemy/common/setup.c +++ b/arch/mips/alchemy/common/setup.c @@ -73,8 +73,8 @@ void __init plat_mem_setup(void) /* This routine should be valid for all Au1x based boards */ phys_t __fixup_bigphys_addr(phys_t phys_addr, phys_t size) { - u32 start = (u32)Au1500_PCI_MEM_START; - u32 end = (u32)Au1500_PCI_MEM_END; + unsigned long start = ALCHEMY_PCI_MEMWIN_START; + unsigned long end = ALCHEMY_PCI_MEMWIN_END; /* Don't fixup 36-bit addresses */ if ((phys_addr >> 32) != 0) @@ -82,7 +82,7 @@ phys_t __fixup_bigphys_addr(phys_t phys_addr, phys_t size) /* Check for PCI memory window */ if (phys_addr >= start && (phys_addr + size - 1) <= end) - return (phys_t)((phys_addr - start) + Au1500_PCI_MEM_START); + return (phys_t)(AU1500_PCI_MEM_PHYS_ADDR + phys_addr); /* default nop */ return phys_addr; diff --git a/arch/mips/alchemy/devboards/db1200/platform.c b/arch/mips/alchemy/devboards/db1200/platform.c index dda090bf74e..c61867c93c4 100644 --- a/arch/mips/alchemy/devboards/db1200/platform.c +++ b/arch/mips/alchemy/devboards/db1200/platform.c @@ -213,7 +213,12 @@ static struct resource db1200_ide_res[] = { .start = DB1200_IDE_INT, .end = DB1200_IDE_INT, .flags = IORESOURCE_IRQ, - } + }, + [2] = { + .start = AU1200_DSCR_CMD0_DMA_REQ1, + .end = AU1200_DSCR_CMD0_DMA_REQ1, + .flags = IORESOURCE_DMA, + }, }; static u64 ide_dmamask = DMA_BIT_MASK(32); @@ -328,23 +333,85 @@ static struct led_classdev db1200_mmc_led = { .brightness_set = db1200_mmcled_set, }; -/* needed by arch/mips/alchemy/common/platform.c */ -struct au1xmmc_platform_data au1xmmc_platdata[] = { +static struct au1xmmc_platform_data db1200mmc_platdata = { + .cd_setup = db1200_mmc_cd_setup, + .set_power = db1200_mmc_set_power, + .card_inserted = db1200_mmc_card_inserted, + .card_readonly = db1200_mmc_card_readonly, + .led = &db1200_mmc_led, +}; + +static struct resource au1200_mmc0_resources[] = { [0] = { - .cd_setup = db1200_mmc_cd_setup, - .set_power = db1200_mmc_set_power, - .card_inserted = db1200_mmc_card_inserted, - .card_readonly = db1200_mmc_card_readonly, - .led = &db1200_mmc_led, + .start = AU1100_SD0_PHYS_ADDR, + .end = AU1100_SD0_PHYS_ADDR + 0xfff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1200_SD_INT, + .end = AU1200_SD_INT, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = AU1200_DSCR_CMD0_SDMS_TX0, + .end = AU1200_DSCR_CMD0_SDMS_TX0, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = AU1200_DSCR_CMD0_SDMS_RX0, + .end = AU1200_DSCR_CMD0_SDMS_RX0, + .flags = IORESOURCE_DMA, + } +}; + +static u64 au1xxx_mmc_dmamask = DMA_BIT_MASK(32); + +static struct platform_device db1200_mmc0_dev = { + .name = "au1xxx-mmc", + .id = 0, + .dev = { + .dma_mask = &au1xxx_mmc_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &db1200mmc_platdata, + }, + .num_resources = ARRAY_SIZE(au1200_mmc0_resources), + .resource = au1200_mmc0_resources, +}; + +/**********************************************************************/ + +static struct resource au1200_lcd_res[] = { + [0] = { + .start = AU1200_LCD_PHYS_ADDR, + .end = AU1200_LCD_PHYS_ADDR + 0x800 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1200_LCD_INT, + .end = AU1200_LCD_INT, + .flags = IORESOURCE_IRQ, + } +}; + +static u64 au1200_lcd_dmamask = DMA_BIT_MASK(32); + +static struct platform_device au1200_lcd_dev = { + .name = "au1200-lcd", + .id = 0, + .dev = { + .dma_mask = &au1200_lcd_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), }, + .num_resources = ARRAY_SIZE(au1200_lcd_res), + .resource = au1200_lcd_res, }; /**********************************************************************/ static struct resource au1200_psc0_res[] = { [0] = { - .start = PSC0_PHYS_ADDR, - .end = PSC0_PHYS_ADDR + 0x000fffff, + .start = AU1550_PSC0_PHYS_ADDR, + .end = AU1550_PSC0_PHYS_ADDR + 0xfff, .flags = IORESOURCE_MEM, }, [1] = { @@ -353,13 +420,13 @@ static struct resource au1200_psc0_res[] = { .flags = IORESOURCE_IRQ, }, [2] = { - .start = DSCR_CMD0_PSC0_TX, - .end = DSCR_CMD0_PSC0_TX, + .start = AU1200_DSCR_CMD0_PSC0_TX, + .end = AU1200_DSCR_CMD0_PSC0_TX, .flags = IORESOURCE_DMA, }, [3] = { - .start = DSCR_CMD0_PSC0_RX, - .end = DSCR_CMD0_PSC0_RX, + .start = AU1200_DSCR_CMD0_PSC0_RX, + .end = AU1200_DSCR_CMD0_PSC0_RX, .flags = IORESOURCE_DMA, }, }; @@ -401,8 +468,8 @@ static struct platform_device db1200_spi_dev = { static struct resource au1200_psc1_res[] = { [0] = { - .start = PSC1_PHYS_ADDR, - .end = PSC1_PHYS_ADDR + 0x000fffff, + .start = AU1550_PSC1_PHYS_ADDR, + .end = AU1550_PSC1_PHYS_ADDR + 0xfff, .flags = IORESOURCE_MEM, }, [1] = { @@ -411,13 +478,13 @@ static struct resource au1200_psc1_res[] = { .flags = IORESOURCE_IRQ, }, [2] = { - .start = DSCR_CMD0_PSC1_TX, - .end = DSCR_CMD0_PSC1_TX, + .start = AU1200_DSCR_CMD0_PSC1_TX, + .end = AU1200_DSCR_CMD0_PSC1_TX, .flags = IORESOURCE_DMA, }, [3] = { - .start = DSCR_CMD0_PSC1_RX, - .end = DSCR_CMD0_PSC1_RX, + .start = AU1200_DSCR_CMD0_PSC1_RX, + .end = AU1200_DSCR_CMD0_PSC1_RX, .flags = IORESOURCE_DMA, }, }; @@ -449,6 +516,8 @@ static struct platform_device db1200_audiodma_dev = { static struct platform_device *db1200_devs[] __initdata = { NULL, /* PSC0, selected by S6.8 */ &db1200_ide_dev, + &db1200_mmc0_dev, + &au1200_lcd_dev, &db1200_eth_dev, &db1200_rtc_dev, &db1200_nand_dev, @@ -526,32 +595,28 @@ static int __init db1200_dev_init(void) /* Audio PSC clock is supplied externally. (FIXME: platdata!!) */ __raw_writel(PSC_SEL_CLK_SERCLK, - (void __iomem *)KSEG1ADDR(PSC1_PHYS_ADDR) + PSC_SEL_OFFSET); + (void __iomem *)KSEG1ADDR(AU1550_PSC1_PHYS_ADDR) + PSC_SEL_OFFSET); wmb(); - db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR, - PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1, - PCMCIA_MEM_PHYS_ADDR, - PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1, - PCMCIA_IO_PHYS_ADDR, - PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1, - DB1200_PC0_INT, - DB1200_PC0_INSERT_INT, - /*DB1200_PC0_STSCHG_INT*/0, - DB1200_PC0_EJECT_INT, - 0); - - db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR + 0x004000000, - PCMCIA_ATTR_PHYS_ADDR + 0x004400000 - 1, - PCMCIA_MEM_PHYS_ADDR + 0x004000000, - PCMCIA_MEM_PHYS_ADDR + 0x004400000 - 1, - PCMCIA_IO_PHYS_ADDR + 0x004000000, - PCMCIA_IO_PHYS_ADDR + 0x004010000 - 1, - DB1200_PC1_INT, - DB1200_PC1_INSERT_INT, - /*DB1200_PC1_STSCHG_INT*/0, - DB1200_PC1_EJECT_INT, - 1); + db1x_register_pcmcia_socket( + AU1000_PCMCIA_ATTR_PHYS_ADDR, + AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1, + AU1000_PCMCIA_MEM_PHYS_ADDR, + AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1, + AU1000_PCMCIA_IO_PHYS_ADDR, + AU1000_PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1, + DB1200_PC0_INT, DB1200_PC0_INSERT_INT, + /*DB1200_PC0_STSCHG_INT*/0, DB1200_PC0_EJECT_INT, 0); + + db1x_register_pcmcia_socket( + AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004000000, + AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004400000 - 1, + AU1000_PCMCIA_MEM_PHYS_ADDR + 0x004000000, + AU1000_PCMCIA_MEM_PHYS_ADDR + 0x004400000 - 1, + AU1000_PCMCIA_IO_PHYS_ADDR + 0x004000000, + AU1000_PCMCIA_IO_PHYS_ADDR + 0x004010000 - 1, + DB1200_PC1_INT, DB1200_PC1_INSERT_INT, + /*DB1200_PC1_STSCHG_INT*/0, DB1200_PC1_EJECT_INT, 1); swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1200_SWAPBOOT; db1x_register_norflash(64 << 20, 2, swapped); diff --git a/arch/mips/alchemy/devboards/db1x00/board_setup.c b/arch/mips/alchemy/devboards/db1x00/board_setup.c index 5c956fe8760..7cd36e631f6 100644 --- a/arch/mips/alchemy/devboards/db1x00/board_setup.c +++ b/arch/mips/alchemy/devboards/db1x00/board_setup.c @@ -40,24 +40,6 @@ #include <prom.h> -#ifdef CONFIG_MIPS_DB1500 -char irq_tab_alchemy[][5] __initdata = { - [12] = { -1, AU1500_PCI_INTA, 0xff, 0xff, 0xff }, /* IDSEL 12 - HPT371 */ - [13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, AU1500_PCI_INTC, AU1500_PCI_INTD }, /* IDSEL 13 - PCI slot */ -}; - -#endif - - -#ifdef CONFIG_MIPS_DB1550 -char irq_tab_alchemy[][5] __initdata = { - [11] = { -1, AU1550_PCI_INTC, 0xff, 0xff, 0xff }, /* IDSEL 11 - on-board HPT371 */ - [12] = { -1, AU1550_PCI_INTB, AU1550_PCI_INTC, AU1550_PCI_INTD, AU1550_PCI_INTA }, /* IDSEL 12 - PCI slot 2 (left) */ - [13] = { -1, AU1550_PCI_INTA, AU1550_PCI_INTB, AU1550_PCI_INTC, AU1550_PCI_INTD }, /* IDSEL 13 - PCI slot 1 (right) */ -}; -#endif - - #ifdef CONFIG_MIPS_BOSPORUS char irq_tab_alchemy[][5] __initdata = { [11] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 11 - miniPCI */ @@ -91,12 +73,6 @@ const char *get_system_type(void) #ifdef CONFIG_MIPS_MIRAGE -char irq_tab_alchemy[][5] __initdata = { - [11] = { -1, AU1500_PCI_INTD, 0xff, 0xff, 0xff }, /* IDSEL 11 - SMI VGX */ - [12] = { -1, 0xff, 0xff, AU1500_PCI_INTC, 0xff }, /* IDSEL 12 - PNX1300 */ - [13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 13 - miniPCI */ -}; - static void mirage_power_off(void) { alchemy_gpio_direction_output(210, 1); @@ -158,9 +134,7 @@ void __init board_setup(void) /* initialize board register space */ bcsr_init(bcsr1, bcsr2); - /* Not valid for Au1550 */ -#if defined(CONFIG_IRDA) && \ - (defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100)) +#if defined(CONFIG_IRDA) && defined(CONFIG_AU1000_FIR) { u32 pin_func; diff --git a/arch/mips/alchemy/devboards/db1x00/platform.c b/arch/mips/alchemy/devboards/db1x00/platform.c index 7057d28f730..9e6b3d442ac 100644 --- a/arch/mips/alchemy/devboards/db1x00/platform.c +++ b/arch/mips/alchemy/devboards/db1x00/platform.c @@ -20,14 +20,16 @@ #include <linux/init.h> #include <linux/interrupt.h> +#include <linux/dma-mapping.h> #include <linux/platform_device.h> #include <asm/mach-au1x00/au1000.h> #include <asm/mach-au1x00/au1000_dma.h> -#include <asm/mach-au1x00/au1xxx.h> #include <asm/mach-db1x00/bcsr.h> #include "../platform.h" +struct pci_dev; + /* DB1xxx PCMCIA interrupt sources: * CD0/1 GPIO0/3 * STSCHG0/1 GPIO1/4 @@ -88,6 +90,155 @@ #endif #endif +#ifdef CONFIG_PCI +#ifdef CONFIG_MIPS_DB1500 +static int db1xxx_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin) +{ + if ((slot < 12) || (slot > 13) || pin == 0) + return -1; + if (slot == 12) + return (pin == 1) ? AU1500_PCI_INTA : 0xff; + if (slot == 13) { + switch (pin) { + case 1: return AU1500_PCI_INTA; + case 2: return AU1500_PCI_INTB; + case 3: return AU1500_PCI_INTC; + case 4: return AU1500_PCI_INTD; + } + } + return -1; +} +#endif + +#ifdef CONFIG_MIPS_DB1550 +static int db1xxx_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin) +{ + if ((slot < 11) || (slot > 13) || pin == 0) + return -1; + if (slot == 11) + return (pin == 1) ? AU1550_PCI_INTC : 0xff; + if (slot == 12) { + switch (pin) { + case 1: return AU1550_PCI_INTB; + case 2: return AU1550_PCI_INTC; + case 3: return AU1550_PCI_INTD; + case 4: return AU1550_PCI_INTA; + } + } + if (slot == 13) { + switch (pin) { + case 1: return AU1550_PCI_INTA; + case 2: return AU1550_PCI_INTB; + case 3: return AU1550_PCI_INTC; + case 4: return AU1550_PCI_INTD; + } + } + return -1; +} +#endif + +#ifdef CONFIG_MIPS_BOSPORUS +static int db1xxx_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin) +{ + if ((slot < 11) || (slot > 13) || pin == 0) + return -1; + if (slot == 12) + return (pin == 1) ? AU1500_PCI_INTA : 0xff; + if (slot == 11) { + switch (pin) { + case 1: return AU1500_PCI_INTA; + case 2: return AU1500_PCI_INTB; + default: return 0xff; + } + } + if (slot == 13) { + switch (pin) { + case 1: return AU1500_PCI_INTA; + case 2: return AU1500_PCI_INTB; + case 3: return AU1500_PCI_INTC; + case 4: return AU1500_PCI_INTD; + } + } + return -1; +} +#endif + +#ifdef CONFIG_MIPS_MIRAGE +static int db1xxx_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin) +{ + if ((slot < 11) || (slot > 13) || pin == 0) + return -1; + if (slot == 11) + return (pin == 1) ? AU1500_PCI_INTD : 0xff; + if (slot == 12) + return (pin == 3) ? AU1500_PCI_INTC : 0xff; + if (slot == 13) { + switch (pin) { + case 1: return AU1500_PCI_INTA; + case 2: return AU1500_PCI_INTB; + default: return 0xff; + } + } + return -1; +} +#endif + +static struct resource alchemy_pci_host_res[] = { + [0] = { + .start = AU1500_PCI_PHYS_ADDR, + .end = AU1500_PCI_PHYS_ADDR + 0xfff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct alchemy_pci_platdata db1xxx_pci_pd = { + .board_map_irq = db1xxx_map_pci_irq, +}; + +static struct platform_device db1xxx_pci_host_dev = { + .dev.platform_data = &db1xxx_pci_pd, + .name = "alchemy-pci", + .id = 0, + .num_resources = ARRAY_SIZE(alchemy_pci_host_res), + .resource = alchemy_pci_host_res, +}; + +static int __init db15x0_pci_init(void) +{ + return platform_device_register(&db1xxx_pci_host_dev); +} +/* must be arch_initcall; MIPS PCI scans busses in a subsys_initcall */ +arch_initcall(db15x0_pci_init); +#endif + +#ifdef CONFIG_MIPS_DB1100 +static struct resource au1100_lcd_resources[] = { + [0] = { + .start = AU1100_LCD_PHYS_ADDR, + .end = AU1100_LCD_PHYS_ADDR + 0x800 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1100_LCD_INT, + .end = AU1100_LCD_INT, + .flags = IORESOURCE_IRQ, + } +}; + +static u64 au1100_lcd_dmamask = DMA_BIT_MASK(32); + +static struct platform_device au1100_lcd_device = { + .name = "au1100-lcd", + .id = 0, + .dev = { + .dma_mask = &au1100_lcd_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .num_resources = ARRAY_SIZE(au1100_lcd_resources), + .resource = au1100_lcd_resources, +}; +#endif + static struct resource alchemy_ac97c_res[] = { [0] = { .start = AU1000_AC97_PHYS_ADDR, @@ -130,29 +281,28 @@ static struct platform_device db1x00_audio_dev = { static int __init db1xxx_dev_init(void) { #ifdef DB1XXX_HAS_PCMCIA - db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR, - PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1, - PCMCIA_MEM_PHYS_ADDR, - PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1, - PCMCIA_IO_PHYS_ADDR, - PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1, - DB1XXX_PCMCIA_CARD0, - DB1XXX_PCMCIA_CD0, - /*DB1XXX_PCMCIA_STSCHG0*/0, - 0, - 0); - - db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR + 0x004000000, - PCMCIA_ATTR_PHYS_ADDR + 0x004400000 - 1, - PCMCIA_MEM_PHYS_ADDR + 0x004000000, - PCMCIA_MEM_PHYS_ADDR + 0x004400000 - 1, - PCMCIA_IO_PHYS_ADDR + 0x004000000, - PCMCIA_IO_PHYS_ADDR + 0x004010000 - 1, - DB1XXX_PCMCIA_CARD1, - DB1XXX_PCMCIA_CD1, - /*DB1XXX_PCMCIA_STSCHG1*/0, - 0, - 1); + db1x_register_pcmcia_socket( + AU1000_PCMCIA_ATTR_PHYS_ADDR, + AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1, + AU1000_PCMCIA_MEM_PHYS_ADDR, + AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1, + AU1000_PCMCIA_IO_PHYS_ADDR, + AU1000_PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1, + DB1XXX_PCMCIA_CARD0, DB1XXX_PCMCIA_CD0, + /*DB1XXX_PCMCIA_STSCHG0*/0, 0, 0); + + db1x_register_pcmcia_socket( + AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004000000, + AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004400000 - 1, + AU1000_PCMCIA_MEM_PHYS_ADDR + 0x004000000, + AU1000_PCMCIA_MEM_PHYS_ADDR + 0x004400000 - 1, + AU1000_PCMCIA_IO_PHYS_ADDR + 0x004000000, + AU1000_PCMCIA_IO_PHYS_ADDR + 0x004010000 - 1, + DB1XXX_PCMCIA_CARD1, DB1XXX_PCMCIA_CD1, + /*DB1XXX_PCMCIA_STSCHG1*/0, 0, 1); +#endif +#ifdef CONFIG_MIPS_DB1100 + platform_device_register(&au1100_lcd_device); #endif db1x_register_norflash(BOARD_FLASH_SIZE, BOARD_FLASH_WIDTH, F_SWAPPED); diff --git a/arch/mips/alchemy/devboards/pb1100/platform.c b/arch/mips/alchemy/devboards/pb1100/platform.c index 2c8dc29759f..9c57c01a68c 100644 --- a/arch/mips/alchemy/devboards/pb1100/platform.c +++ b/arch/mips/alchemy/devboards/pb1100/platform.c @@ -19,31 +19,58 @@ */ #include <linux/init.h> +#include <linux/dma-mapping.h> +#include <linux/platform_device.h> #include <asm/mach-au1x00/au1000.h> #include <asm/mach-db1x00/bcsr.h> #include "../platform.h" +static struct resource au1100_lcd_resources[] = { + [0] = { + .start = AU1100_LCD_PHYS_ADDR, + .end = AU1100_LCD_PHYS_ADDR + 0x800 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1100_LCD_INT, + .end = AU1100_LCD_INT, + .flags = IORESOURCE_IRQ, + } +}; + +static u64 au1100_lcd_dmamask = DMA_BIT_MASK(32); + +static struct platform_device au1100_lcd_device = { + .name = "au1100-lcd", + .id = 0, + .dev = { + .dma_mask = &au1100_lcd_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .num_resources = ARRAY_SIZE(au1100_lcd_resources), + .resource = au1100_lcd_resources, +}; + static int __init pb1100_dev_init(void) { int swapped; /* PCMCIA. single socket, identical to Pb1500 */ - db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR, - PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1, - PCMCIA_MEM_PHYS_ADDR, - PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1, - PCMCIA_IO_PHYS_ADDR, - PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1, - AU1100_GPIO11_INT, /* card */ - AU1100_GPIO9_INT, /* insert */ - /*AU1100_GPIO10_INT*/0, /* stschg */ - 0, /* eject */ - 0); /* id */ + db1x_register_pcmcia_socket( + AU1000_PCMCIA_ATTR_PHYS_ADDR, + AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1, + AU1000_PCMCIA_MEM_PHYS_ADDR, + AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1, + AU1000_PCMCIA_IO_PHYS_ADDR, + AU1000_PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1, + AU1100_GPIO11_INT, AU1100_GPIO9_INT, /* card / insert */ + /*AU1100_GPIO10_INT*/0, 0, 0); /* stschg / eject / id */ swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1000_SWAPBOOT; db1x_register_norflash(64 * 1024 * 1024, 4, swapped); + platform_device_register(&au1100_lcd_device); return 0; } diff --git a/arch/mips/alchemy/devboards/pb1200/platform.c b/arch/mips/alchemy/devboards/pb1200/platform.c index 3ef2dceeb79..54f7f7b0676 100644 --- a/arch/mips/alchemy/devboards/pb1200/platform.c +++ b/arch/mips/alchemy/devboards/pb1200/platform.c @@ -24,9 +24,11 @@ #include <linux/platform_device.h> #include <linux/smc91x.h> -#include <asm/mach-au1x00/au1xxx.h> +#include <asm/mach-au1x00/au1000.h> #include <asm/mach-au1x00/au1100_mmc.h> +#include <asm/mach-au1x00/au1xxx_dbdma.h> #include <asm/mach-db1x00/bcsr.h> +#include <asm/mach-pb1x00/pb1200.h> #include "../platform.h" @@ -88,7 +90,7 @@ static int pb1200mmc1_card_inserted(void *mmc_host) return (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD1INSERT) ? 1 : 0; } -const struct au1xmmc_platform_data au1xmmc_platdata[2] = { +static struct au1xmmc_platform_data pb1200mmc_platdata[2] = { [0] = { .set_power = pb1200mmc0_set_power, .card_inserted = pb1200mmc0_card_inserted, @@ -105,6 +107,79 @@ const struct au1xmmc_platform_data au1xmmc_platdata[2] = { }, }; +static u64 au1xxx_mmc_dmamask = DMA_BIT_MASK(32); + +static struct resource au1200_mmc0_res[] = { + [0] = { + .start = AU1100_SD0_PHYS_ADDR, + .end = AU1100_SD0_PHYS_ADDR + 0xfff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1200_SD_INT, + .end = AU1200_SD_INT, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = AU1200_DSCR_CMD0_SDMS_TX0, + .end = AU1200_DSCR_CMD0_SDMS_TX0, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = AU1200_DSCR_CMD0_SDMS_RX0, + .end = AU1200_DSCR_CMD0_SDMS_RX0, + .flags = IORESOURCE_DMA, + } +}; + +static struct platform_device pb1200_mmc0_dev = { + .name = "au1xxx-mmc", + .id = 0, + .dev = { + .dma_mask = &au1xxx_mmc_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &pb1200mmc_platdata[0], + }, + .num_resources = ARRAY_SIZE(au1200_mmc0_res), + .resource = au1200_mmc0_res, +}; + +static struct resource au1200_mmc1_res[] = { + [0] = { + .start = AU1100_SD1_PHYS_ADDR, + .end = AU1100_SD1_PHYS_ADDR + 0xfff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1200_SD_INT, + .end = AU1200_SD_INT, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = AU1200_DSCR_CMD0_SDMS_TX1, + .end = AU1200_DSCR_CMD0_SDMS_TX1, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = AU1200_DSCR_CMD0_SDMS_RX1, + .end = AU1200_DSCR_CMD0_SDMS_RX1, + .flags = IORESOURCE_DMA, + } +}; + +static struct platform_device pb1200_mmc1_dev = { + .name = "au1xxx-mmc", + .id = 1, + .dev = { + .dma_mask = &au1xxx_mmc_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &pb1200mmc_platdata[1], + }, + .num_resources = ARRAY_SIZE(au1200_mmc1_res), + .resource = au1200_mmc1_res, +}; + + static struct resource ide_resources[] = { [0] = { .start = IDE_PHYS_ADDR, @@ -115,7 +190,12 @@ static struct resource ide_resources[] = { .start = IDE_INT, .end = IDE_INT, .flags = IORESOURCE_IRQ - } + }, + [2] = { + .start = AU1200_DSCR_CMD0_DMA_REQ1, + .end = AU1200_DSCR_CMD0_DMA_REQ1, + .flags = IORESOURCE_DMA, + }, }; static u64 ide_dmamask = DMA_BIT_MASK(32); @@ -161,38 +241,94 @@ static struct platform_device smc91c111_device = { .resource = smc91c111_resources }; +static struct resource au1200_psc0_res[] = { + [0] = { + .start = AU1550_PSC0_PHYS_ADDR, + .end = AU1550_PSC0_PHYS_ADDR + 0xfff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1200_PSC0_INT, + .end = AU1200_PSC0_INT, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = AU1200_DSCR_CMD0_PSC0_TX, + .end = AU1200_DSCR_CMD0_PSC0_TX, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = AU1200_DSCR_CMD0_PSC0_RX, + .end = AU1200_DSCR_CMD0_PSC0_RX, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device pb1200_i2c_dev = { + .name = "au1xpsc_smbus", + .id = 0, /* bus number */ + .num_resources = ARRAY_SIZE(au1200_psc0_res), + .resource = au1200_psc0_res, +}; + +static struct resource au1200_lcd_res[] = { + [0] = { + .start = AU1200_LCD_PHYS_ADDR, + .end = AU1200_LCD_PHYS_ADDR + 0x800 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1200_LCD_INT, + .end = AU1200_LCD_INT, + .flags = IORESOURCE_IRQ, + } +}; + +static u64 au1200_lcd_dmamask = DMA_BIT_MASK(32); + +static struct platform_device au1200_lcd_dev = { + .name = "au1200-lcd", + .id = 0, + .dev = { + .dma_mask = &au1200_lcd_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .num_resources = ARRAY_SIZE(au1200_lcd_res), + .resource = au1200_lcd_res, +}; + static struct platform_device *board_platform_devices[] __initdata = { &ide_device, - &smc91c111_device + &smc91c111_device, + &pb1200_i2c_dev, + &pb1200_mmc0_dev, + &pb1200_mmc1_dev, + &au1200_lcd_dev, }; static int __init board_register_devices(void) { int swapped; - db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR, - PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1, - PCMCIA_MEM_PHYS_ADDR, - PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1, - PCMCIA_IO_PHYS_ADDR, - PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1, - PB1200_PC0_INT, - PB1200_PC0_INSERT_INT, - /*PB1200_PC0_STSCHG_INT*/0, - PB1200_PC0_EJECT_INT, - 0); - - db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR + 0x008000000, - PCMCIA_ATTR_PHYS_ADDR + 0x008400000 - 1, - PCMCIA_MEM_PHYS_ADDR + 0x008000000, - PCMCIA_MEM_PHYS_ADDR + 0x008400000 - 1, - PCMCIA_IO_PHYS_ADDR + 0x008000000, - PCMCIA_IO_PHYS_ADDR + 0x008010000 - 1, - PB1200_PC1_INT, - PB1200_PC1_INSERT_INT, - /*PB1200_PC1_STSCHG_INT*/0, - PB1200_PC1_EJECT_INT, - 1); + db1x_register_pcmcia_socket( + AU1000_PCMCIA_ATTR_PHYS_ADDR, + AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1, + AU1000_PCMCIA_MEM_PHYS_ADDR, + AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1, + AU1000_PCMCIA_IO_PHYS_ADDR, + AU1000_PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1, + PB1200_PC0_INT, PB1200_PC0_INSERT_INT, + /*PB1200_PC0_STSCHG_INT*/0, PB1200_PC0_EJECT_INT, 0); + + db1x_register_pcmcia_socket( + AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x008000000, + AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x008400000 - 1, + AU1000_PCMCIA_MEM_PHYS_ADDR + 0x008000000, + AU1000_PCMCIA_MEM_PHYS_ADDR + 0x008400000 - 1, + AU1000_PCMCIA_IO_PHYS_ADDR + 0x008000000, + AU1000_PCMCIA_IO_PHYS_ADDR + 0x008010000 - 1, + PB1200_PC1_INT, PB1200_PC1_INSERT_INT, + /*PB1200_PC1_STSCHG_INT*/0, PB1200_PC1_EJECT_INT, 1); swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1200_SWAPBOOT; db1x_register_norflash(128 * 1024 * 1024, 2, swapped); diff --git a/arch/mips/alchemy/devboards/pb1500/board_setup.c b/arch/mips/alchemy/devboards/pb1500/board_setup.c index 3b4fa320696..37c1883b5ea 100644 --- a/arch/mips/alchemy/devboards/pb1500/board_setup.c +++ b/arch/mips/alchemy/devboards/pb1500/board_setup.c @@ -33,13 +33,6 @@ #include <prom.h> - -char irq_tab_alchemy[][5] __initdata = { - [12] = { -1, AU1500_PCI_INTA, 0xff, 0xff, 0xff }, /* IDSEL 12 - HPT370 */ - [13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, AU1500_PCI_INTC, AU1500_PCI_INTD }, /* IDSEL 13 - PCI slot */ -}; - - const char *get_system_type(void) { return "Alchemy Pb1500"; @@ -101,20 +94,18 @@ void __init board_setup(void) #endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */ #ifdef CONFIG_PCI - /* Setup PCI bus controller */ - au_writel(0, Au1500_PCI_CMEM); - au_writel(0x00003fff, Au1500_CFG_BASE); -#if defined(__MIPSEB__) - au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG); -#else - au_writel(0xf, Au1500_PCI_CFG); -#endif - au_writel(0xf0000000, Au1500_PCI_MWMASK_DEV); - au_writel(0, Au1500_PCI_MWBASE_REV_CCL); - au_writel(0x02a00356, Au1500_PCI_STATCMD); - au_writel(0x00003c04, Au1500_PCI_HDRTYPE); - au_writel(0x00000008, Au1500_PCI_MBAR); - au_sync(); + { + void __iomem *base = + (void __iomem *)KSEG1ADDR(AU1500_PCI_PHYS_ADDR); + /* Setup PCI bus controller */ + __raw_writel(0x00003fff, base + PCI_REG_CMEM); + __raw_writel(0xf0000000, base + PCI_REG_MWMASK_DEV); + __raw_writel(0, base + PCI_REG_MWBASE_REV_CCL); + __raw_writel(0x02a00356, base + PCI_REG_STATCMD); + __raw_writel(0x00003c04, base + PCI_REG_PARAM); + __raw_writel(0x00000008, base + PCI_REG_MBAR); + wmb(); + } #endif /* Enable sys bus clock divider when IDLE state or no bus activity. */ diff --git a/arch/mips/alchemy/devboards/pb1500/platform.c b/arch/mips/alchemy/devboards/pb1500/platform.c index d443bc7aa76..1e52a01bac0 100644 --- a/arch/mips/alchemy/devboards/pb1500/platform.c +++ b/arch/mips/alchemy/devboards/pb1500/platform.c @@ -18,32 +18,77 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +#include <linux/dma-mapping.h> #include <linux/init.h> +#include <linux/platform_device.h> #include <asm/mach-au1x00/au1000.h> #include <asm/mach-db1x00/bcsr.h> #include "../platform.h" +static int pb1500_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin) +{ + if ((slot < 12) || (slot > 13) || pin == 0) + return -1; + if (slot == 12) + return (pin == 1) ? AU1500_PCI_INTA : 0xff; + if (slot == 13) { + switch (pin) { + case 1: return AU1500_PCI_INTA; + case 2: return AU1500_PCI_INTB; + case 3: return AU1500_PCI_INTC; + case 4: return AU1500_PCI_INTD; + } + } + return -1; +} + +static struct resource alchemy_pci_host_res[] = { + [0] = { + .start = AU1500_PCI_PHYS_ADDR, + .end = AU1500_PCI_PHYS_ADDR + 0xfff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct alchemy_pci_platdata pb1500_pci_pd = { + .board_map_irq = pb1500_map_pci_irq, + .pci_cfg_set = PCI_CONFIG_AEN | PCI_CONFIG_R2H | PCI_CONFIG_R1H | + PCI_CONFIG_CH | +#if defined(__MIPSEB__) + PCI_CONFIG_SIC_HWA_DAT | PCI_CONFIG_SM, +#else + 0, +#endif +}; + +static struct platform_device pb1500_pci_host = { + .dev.platform_data = &pb1500_pci_pd, + .name = "alchemy-pci", + .id = 0, + .num_resources = ARRAY_SIZE(alchemy_pci_host_res), + .resource = alchemy_pci_host_res, +}; + static int __init pb1500_dev_init(void) { int swapped; - /* PCMCIA. single socket, identical to Pb1500 */ - db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR, - PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1, - PCMCIA_MEM_PHYS_ADDR, - PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1, - PCMCIA_IO_PHYS_ADDR, - PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1, - AU1500_GPIO11_INT, /* card */ - AU1500_GPIO9_INT, /* insert */ - /*AU1500_GPIO10_INT*/0, /* stschg */ - 0, /* eject */ - 0); /* id */ + /* PCMCIA. single socket, identical to Pb1100 */ + db1x_register_pcmcia_socket( + AU1000_PCMCIA_ATTR_PHYS_ADDR, + AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1, + AU1000_PCMCIA_MEM_PHYS_ADDR, + AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1, + AU1000_PCMCIA_IO_PHYS_ADDR, + AU1000_PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1, + AU1500_GPIO11_INT, AU1500_GPIO9_INT, /* card / insert */ + /*AU1500_GPIO10_INT*/0, 0, 0); /* stschg / eject / id */ swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1000_SWAPBOOT; db1x_register_norflash(64 * 1024 * 1024, 4, swapped); + platform_device_register(&pb1500_pci_host); return 0; } -device_initcall(pb1500_dev_init); +arch_initcall(pb1500_dev_init); diff --git a/arch/mips/alchemy/devboards/pb1550/board_setup.c b/arch/mips/alchemy/devboards/pb1550/board_setup.c index b790213848b..0f62d1e3df2 100644 --- a/arch/mips/alchemy/devboards/pb1550/board_setup.c +++ b/arch/mips/alchemy/devboards/pb1550/board_setup.c @@ -37,12 +37,6 @@ #include <prom.h> - -char irq_tab_alchemy[][5] __initdata = { - [12] = { -1, AU1550_PCI_INTB, AU1550_PCI_INTC, AU1550_PCI_INTD, AU1550_PCI_INTA }, /* IDSEL 12 - PCI slot 2 (left) */ - [13] = { -1, AU1550_PCI_INTA, AU1550_PCI_INTB, AU1550_PCI_INTC, AU1550_PCI_INTD }, /* IDSEL 13 - PCI slot 1 (right) */ -}; - const char *get_system_type(void) { return "Alchemy Pb1550"; diff --git a/arch/mips/alchemy/devboards/pb1550/platform.c b/arch/mips/alchemy/devboards/pb1550/platform.c index d7150d0f49c..a4604b8a349 100644 --- a/arch/mips/alchemy/devboards/pb1550/platform.c +++ b/arch/mips/alchemy/devboards/pb1550/platform.c @@ -18,14 +18,89 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +#include <linux/dma-mapping.h> #include <linux/init.h> - +#include <linux/platform_device.h> #include <asm/mach-au1x00/au1000.h> +#include <asm/mach-au1x00/au1xxx_dbdma.h> #include <asm/mach-pb1x00/pb1550.h> #include <asm/mach-db1x00/bcsr.h> #include "../platform.h" +static int pb1550_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin) +{ + if ((slot < 12) || (slot > 13) || pin == 0) + return -1; + if (slot == 12) { + switch (pin) { + case 1: return AU1500_PCI_INTB; + case 2: return AU1500_PCI_INTC; + case 3: return AU1500_PCI_INTD; + case 4: return AU1500_PCI_INTA; + } + } + if (slot == 13) { + switch (pin) { + case 1: return AU1500_PCI_INTA; + case 2: return AU1500_PCI_INTB; + case 3: return AU1500_PCI_INTC; + case 4: return AU1500_PCI_INTD; + } + } + return -1; +} + +static struct resource alchemy_pci_host_res[] = { + [0] = { + .start = AU1500_PCI_PHYS_ADDR, + .end = AU1500_PCI_PHYS_ADDR + 0xfff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct alchemy_pci_platdata pb1550_pci_pd = { + .board_map_irq = pb1550_map_pci_irq, +}; + +static struct platform_device pb1550_pci_host = { + .dev.platform_data = &pb1550_pci_pd, + .name = "alchemy-pci", + .id = 0, + .num_resources = ARRAY_SIZE(alchemy_pci_host_res), + .resource = alchemy_pci_host_res, +}; + +static struct resource au1550_psc2_res[] = { + [0] = { + .start = AU1550_PSC2_PHYS_ADDR, + .end = AU1550_PSC2_PHYS_ADDR + 0xfff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1550_PSC2_INT, + .end = AU1550_PSC2_INT, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = AU1550_DSCR_CMD0_PSC2_TX, + .end = AU1550_DSCR_CMD0_PSC2_TX, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = AU1550_DSCR_CMD0_PSC2_RX, + .end = AU1550_DSCR_CMD0_PSC2_RX, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device pb1550_i2c_dev = { + .name = "au1xpsc_smbus", + .id = 0, /* bus number */ + .num_resources = ARRAY_SIZE(au1550_psc2_res), + .resource = au1550_psc2_res, +}; + static int __init pb1550_dev_init(void) { int swapped; @@ -37,33 +112,29 @@ static int __init pb1550_dev_init(void) * drivers are used to shared irqs and b) statuschange isn't really use- * ful anyway. */ - db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR, - PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1, - PCMCIA_MEM_PHYS_ADDR, - PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1, - PCMCIA_IO_PHYS_ADDR, - PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1, - AU1550_GPIO201_205_INT, - AU1550_GPIO0_INT, - 0, - 0, - 0); + db1x_register_pcmcia_socket( + AU1000_PCMCIA_ATTR_PHYS_ADDR, + AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1, + AU1000_PCMCIA_MEM_PHYS_ADDR, + AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1, + AU1000_PCMCIA_IO_PHYS_ADDR, + AU1000_PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1, + AU1550_GPIO201_205_INT, AU1550_GPIO0_INT, 0, 0, 0); - db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR + 0x008000000, - PCMCIA_ATTR_PHYS_ADDR + 0x008400000 - 1, - PCMCIA_MEM_PHYS_ADDR + 0x008000000, - PCMCIA_MEM_PHYS_ADDR + 0x008400000 - 1, - PCMCIA_IO_PHYS_ADDR + 0x008000000, - PCMCIA_IO_PHYS_ADDR + 0x008010000 - 1, - AU1550_GPIO201_205_INT, - AU1550_GPIO1_INT, - 0, - 0, - 1); + db1x_register_pcmcia_socket( + AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x008000000, + AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x008400000 - 1, + AU1000_PCMCIA_MEM_PHYS_ADDR + 0x008000000, + AU1000_PCMCIA_MEM_PHYS_ADDR + 0x008400000 - 1, + AU1000_PCMCIA_IO_PHYS_ADDR + 0x008000000, + AU1000_PCMCIA_IO_PHYS_ADDR + 0x008010000 - 1, + AU1550_GPIO201_205_INT, AU1550_GPIO1_INT, 0, 0, 1); swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_PB1550_SWAPBOOT; db1x_register_norflash(128 * 1024 * 1024, 4, swapped); + platform_device_register(&pb1550_pci_host); + platform_device_register(&pb1550_i2c_dev); return 0; } -device_initcall(pb1550_dev_init); +arch_initcall(pb1550_dev_init); diff --git a/arch/mips/alchemy/gpr/board_setup.c b/arch/mips/alchemy/gpr/board_setup.c index 5f8f0691ed2..dea45c78fdc 100644 --- a/arch/mips/alchemy/gpr/board_setup.c +++ b/arch/mips/alchemy/gpr/board_setup.c @@ -36,10 +36,6 @@ #include <prom.h> -char irq_tab_alchemy[][5] __initdata = { - [0] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, -}; - static void gpr_reset(char *c) { /* switch System-LED to orange (red# and green# on) */ @@ -76,12 +72,4 @@ void __init board_setup(void) /* Take away Reset of UMTS-card */ alchemy_gpio_direction_output(215, 1); - -#ifdef CONFIG_PCI -#if defined(__MIPSEB__) - au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG); -#else - au_writel(0xf, Au1500_PCI_CFG); -#endif -#endif } diff --git a/arch/mips/alchemy/gpr/platform.c b/arch/mips/alchemy/gpr/platform.c index 14b46629cfc..982ce85db60 100644 --- a/arch/mips/alchemy/gpr/platform.c +++ b/arch/mips/alchemy/gpr/platform.c @@ -167,6 +167,45 @@ static struct i2c_board_info gpr_i2c_info[] __initdata = { } }; + + +static struct resource alchemy_pci_host_res[] = { + [0] = { + .start = AU1500_PCI_PHYS_ADDR, + .end = AU1500_PCI_PHYS_ADDR + 0xfff, + .flags = IORESOURCE_MEM, + }, +}; + +static int gpr_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin) +{ + if ((slot == 0) && (pin == 1)) + return AU1550_PCI_INTA; + else if ((slot == 0) && (pin == 2)) + return AU1550_PCI_INTB; + + return -1; +} + +static struct alchemy_pci_platdata gpr_pci_pd = { + .board_map_irq = gpr_map_pci_irq, + .pci_cfg_set = PCI_CONFIG_AEN | PCI_CONFIG_R2H | PCI_CONFIG_R1H | + PCI_CONFIG_CH | +#if defined(__MIPSEB__) + PCI_CONFIG_SIC_HWA_DAT | PCI_CONFIG_SM, +#else + 0, +#endif +}; + +static struct platform_device gpr_pci_host_dev = { + .dev.platform_data = &gpr_pci_pd, + .name = "alchemy-pci", + .id = 0, + .num_resources = ARRAY_SIZE(alchemy_pci_host_res), + .resource = alchemy_pci_host_res, +}; + static struct platform_device *gpr_devices[] __initdata = { &gpr_wdt_device, &gpr_mtd_device, @@ -174,6 +213,14 @@ static struct platform_device *gpr_devices[] __initdata = { &gpr_led_devices, }; +static int __init gpr_pci_init(void) +{ + return platform_device_register(&gpr_pci_host_dev); +} +/* must be arch_initcall; MIPS PCI scans busses in a subsys_initcall */ +arch_initcall(gpr_pci_init); + + static int __init gpr_dev_init(void) { i2c_register_board_info(0, gpr_i2c_info, ARRAY_SIZE(gpr_i2c_info)); diff --git a/arch/mips/alchemy/mtx-1/board_setup.c b/arch/mips/alchemy/mtx-1/board_setup.c index 3ae984cf98c..851a5ab4c8f 100644 --- a/arch/mips/alchemy/mtx-1/board_setup.c +++ b/arch/mips/alchemy/mtx-1/board_setup.c @@ -38,20 +38,6 @@ #include <prom.h> -char irq_tab_alchemy[][5] __initdata = { - [0] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 00 - AdapterA-Slot0 (top) */ - [1] = { -1, AU1500_PCI_INTB, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 01 - AdapterA-Slot1 (bottom) */ - [2] = { -1, AU1500_PCI_INTC, AU1500_PCI_INTD, 0xff, 0xff }, /* IDSEL 02 - AdapterB-Slot0 (top) */ - [3] = { -1, AU1500_PCI_INTD, AU1500_PCI_INTC, 0xff, 0xff }, /* IDSEL 03 - AdapterB-Slot1 (bottom) */ - [4] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 04 - AdapterC-Slot0 (top) */ - [5] = { -1, AU1500_PCI_INTB, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 05 - AdapterC-Slot1 (bottom) */ - [6] = { -1, AU1500_PCI_INTC, AU1500_PCI_INTD, 0xff, 0xff }, /* IDSEL 06 - AdapterD-Slot0 (top) */ - [7] = { -1, AU1500_PCI_INTD, AU1500_PCI_INTC, 0xff, 0xff }, /* IDSEL 07 - AdapterD-Slot1 (bottom) */ -}; - -extern int (*board_pci_idsel)(unsigned int devsel, int assert); -int mtx1_pci_idsel(unsigned int devsel, int assert); - static void mtx1_reset(char *c) { /* Jump to the reset vector */ @@ -74,15 +60,6 @@ void __init board_setup(void) alchemy_gpio_direction_output(204, 0); #endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */ -#ifdef CONFIG_PCI -#if defined(__MIPSEB__) - au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG); -#else - au_writel(0xf, Au1500_PCI_CFG); -#endif - board_pci_idsel = mtx1_pci_idsel; -#endif - /* Initialize sys_pinfunc */ au_writel(SYS_PF_NI2, SYS_PINFUNC); @@ -104,23 +81,6 @@ void __init board_setup(void) printk(KERN_INFO "4G Systems MTX-1 Board\n"); } -int -mtx1_pci_idsel(unsigned int devsel, int assert) -{ - /* This function is only necessary to support a proprietary Cardbus - * adapter on the mtx-1 "singleboard" variant. It triggers a custom - * logic chip connected to EXT_IO3 (GPIO1) to suppress IDSEL signals. - */ - if (assert && devsel != 0) - /* Suppress signal to Cardbus */ - alchemy_gpio_set_value(1, 0); /* set EXT_IO3 OFF */ - else - alchemy_gpio_set_value(1, 1); /* set EXT_IO3 ON */ - - udelay(1); - return 1; -} - static int __init mtx1_init_irq(void) { irq_set_irq_type(AU1500_GPIO204_INT, IRQF_TRIGGER_HIGH); diff --git a/arch/mips/alchemy/mtx-1/platform.c b/arch/mips/alchemy/mtx-1/platform.c index 55628e390fd..cc47b6868ca 100644 --- a/arch/mips/alchemy/mtx-1/platform.c +++ b/arch/mips/alchemy/mtx-1/platform.c @@ -135,7 +135,69 @@ static struct platform_device mtx1_mtd = { .resource = &mtx1_mtd_resource, }; +static struct resource alchemy_pci_host_res[] = { + [0] = { + .start = AU1500_PCI_PHYS_ADDR, + .end = AU1500_PCI_PHYS_ADDR + 0xfff, + .flags = IORESOURCE_MEM, + }, +}; + +static int mtx1_pci_idsel(unsigned int devsel, int assert) +{ + /* This function is only necessary to support a proprietary Cardbus + * adapter on the mtx-1 "singleboard" variant. It triggers a custom + * logic chip connected to EXT_IO3 (GPIO1) to suppress IDSEL signals. + */ + if (assert && devsel != 0) + /* Suppress signal to Cardbus */ + alchemy_gpio_set_value(1, 0); /* set EXT_IO3 OFF */ + else + alchemy_gpio_set_value(1, 1); /* set EXT_IO3 ON */ + + udelay(1); + return 1; +} + +static const char mtx1_irqtab[][5] = { + [0] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 00 - AdapterA-Slot0 (top) */ + [1] = { -1, AU1500_PCI_INTB, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 01 - AdapterA-Slot1 (bottom) */ + [2] = { -1, AU1500_PCI_INTC, AU1500_PCI_INTD, 0xff, 0xff }, /* IDSEL 02 - AdapterB-Slot0 (top) */ + [3] = { -1, AU1500_PCI_INTD, AU1500_PCI_INTC, 0xff, 0xff }, /* IDSEL 03 - AdapterB-Slot1 (bottom) */ + [4] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 04 - AdapterC-Slot0 (top) */ + [5] = { -1, AU1500_PCI_INTB, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 05 - AdapterC-Slot1 (bottom) */ + [6] = { -1, AU1500_PCI_INTC, AU1500_PCI_INTD, 0xff, 0xff }, /* IDSEL 06 - AdapterD-Slot0 (top) */ + [7] = { -1, AU1500_PCI_INTD, AU1500_PCI_INTC, 0xff, 0xff }, /* IDSEL 07 - AdapterD-Slot1 (bottom) */ +}; + +static int mtx1_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin) +{ + return mtx1_irqtab[slot][pin]; +} + +static struct alchemy_pci_platdata mtx1_pci_pd = { + .board_map_irq = mtx1_map_pci_irq, + .board_pci_idsel = mtx1_pci_idsel, + .pci_cfg_set = PCI_CONFIG_AEN | PCI_CONFIG_R2H | PCI_CONFIG_R1H | + PCI_CONFIG_CH | +#if defined(__MIPSEB__) + PCI_CONFIG_SIC_HWA_DAT | PCI_CONFIG_SM, +#else + 0, +#endif +}; + +static struct platform_device mtx1_pci_host = { + .dev.platform_data = &mtx1_pci_pd, + .name = "alchemy-pci", + .id = 0, + .num_resources = ARRAY_SIZE(alchemy_pci_host_res), + .resource = alchemy_pci_host_res, +}; + + static struct __initdata platform_device * mtx1_devs[] = { + &mtx1_pci_host, &mtx1_gpio_leds, &mtx1_wdt, &mtx1_button, diff --git a/arch/mips/alchemy/xxs1500/board_setup.c b/arch/mips/alchemy/xxs1500/board_setup.c index 81e57fad07a..3fa83f72e01 100644 --- a/arch/mips/alchemy/xxs1500/board_setup.c +++ b/arch/mips/alchemy/xxs1500/board_setup.c @@ -70,14 +70,6 @@ void __init board_setup(void) /* Enable DTR (MCR bit 0) = USB power up */ __raw_writel(1, (void __iomem *)KSEG1ADDR(AU1000_UART3_PHYS_ADDR + 0x18)); wmb(); - -#ifdef CONFIG_PCI -#if defined(__MIPSEB__) - au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG); -#else - au_writel(0xf, Au1500_PCI_CFG); -#endif -#endif } static int __init xxs1500_init_irq(void) diff --git a/arch/mips/alchemy/xxs1500/platform.c b/arch/mips/alchemy/xxs1500/platform.c index e87c45cde61..06a3a459b8a 100644 --- a/arch/mips/alchemy/xxs1500/platform.c +++ b/arch/mips/alchemy/xxs1500/platform.c @@ -27,20 +27,20 @@ static struct resource xxs1500_pcmcia_res[] = { { .name = "pcmcia-io", .flags = IORESOURCE_MEM, - .start = PCMCIA_IO_PHYS_ADDR, - .end = PCMCIA_IO_PHYS_ADDR + 0x000400000 - 1, + .start = AU1000_PCMCIA_IO_PHYS_ADDR, + .end = AU1000_PCMCIA_IO_PHYS_ADDR + 0x000400000 - 1, }, { .name = "pcmcia-attr", .flags = IORESOURCE_MEM, - .start = PCMCIA_ATTR_PHYS_ADDR, - .end = PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1, + .start = AU1000_PCMCIA_ATTR_PHYS_ADDR, + .end = AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1, }, { .name = "pcmcia-mem", .flags = IORESOURCE_MEM, - .start = PCMCIA_MEM_PHYS_ADDR, - .end = PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1, + .start = AU1000_PCMCIA_MEM_PHYS_ADDR, + .end = AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1, }, }; diff --git a/arch/mips/include/asm/cacheflush.h b/arch/mips/include/asm/cacheflush.h index 40bb9fde205..69468ded282 100644 --- a/arch/mips/include/asm/cacheflush.h +++ b/arch/mips/include/asm/cacheflush.h @@ -114,4 +114,28 @@ unsigned long run_uncached(void *func); extern void *kmap_coherent(struct page *page, unsigned long addr); extern void kunmap_coherent(void); +#define ARCH_HAS_FLUSH_KERNEL_DCACHE_PAGE +static inline void flush_kernel_dcache_page(struct page *page) +{ + BUG_ON(cpu_has_dc_aliases && PageHighMem(page)); +} + +/* + * For now flush_kernel_vmap_range and invalidate_kernel_vmap_range both do a + * cache writeback and invalidate operation. + */ +extern void (*__flush_kernel_vmap_range)(unsigned long vaddr, int size); + +static inline void flush_kernel_vmap_range(void *vaddr, int size) +{ + if (cpu_has_dc_aliases) + __flush_kernel_vmap_range((unsigned long) vaddr, size); +} + +static inline void invalidate_kernel_vmap_range(void *vaddr, int size) +{ + if (cpu_has_dc_aliases) + __flush_kernel_vmap_range((unsigned long) vaddr, size); +} + #endif /* _ASM_CACHEFLUSH_H */ diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h index 5f95a4bfc73..2f7f41873f2 100644 --- a/arch/mips/include/asm/cpu.h +++ b/arch/mips/include/asm/cpu.h @@ -135,6 +135,9 @@ #define PRID_IMP_CAVIUM_CN50XX 0x0600 #define PRID_IMP_CAVIUM_CN52XX 0x0700 #define PRID_IMP_CAVIUM_CN63XX 0x9000 +#define PRID_IMP_CAVIUM_CN68XX 0x9100 +#define PRID_IMP_CAVIUM_CN66XX 0x9200 +#define PRID_IMP_CAVIUM_CN61XX 0x9300 /* * These are the PRID's for when 23:16 == PRID_COMP_INGENIC diff --git a/arch/mips/include/asm/io.h b/arch/mips/include/asm/io.h index b04e4de5dd2..a58f22998a8 100644 --- a/arch/mips/include/asm/io.h +++ b/arch/mips/include/asm/io.h @@ -329,14 +329,10 @@ static inline void pfx##write##bwlq(type val, \ "dsrl32 %L0, %L0, 0" "\n\t" \ "dsll32 %M0, %M0, 0" "\n\t" \ "or %L0, %L0, %M0" "\n\t" \ - ".set push" "\n\t" \ - ".set noreorder" "\n\t" \ - ".set nomacro" "\n\t" \ "sd %L0, %2" "\n\t" \ - ".set pop" "\n\t" \ ".set mips0" "\n" \ : "=r" (__tmp) \ - : "0" (__val), "R" (*__mem)); \ + : "0" (__val), "m" (*__mem)); \ if (irq) \ local_irq_restore(__flags); \ } else \ @@ -359,16 +355,12 @@ static inline type pfx##read##bwlq(const volatile void __iomem *mem) \ local_irq_save(__flags); \ __asm__ __volatile__( \ ".set mips3" "\t\t# __readq" "\n\t" \ - ".set push" "\n\t" \ - ".set noreorder" "\n\t" \ - ".set nomacro" "\n\t" \ "ld %L0, %1" "\n\t" \ - ".set pop" "\n\t" \ "dsra32 %M0, %L0, 0" "\n\t" \ "sll %L0, %L0, 0" "\n\t" \ ".set mips0" "\n" \ : "=r" (__val) \ - : "R" (*__mem)); \ + : "m" (*__mem)); \ if (irq) \ local_irq_restore(__flags); \ } else { \ diff --git a/arch/mips/include/asm/mach-au1x00/au1000.h b/arch/mips/include/asm/mach-au1x00/au1000.h index f260ebed713..de24ec57dd2 100644 --- a/arch/mips/include/asm/mach-au1x00/au1000.h +++ b/arch/mips/include/asm/mach-au1x00/au1000.h @@ -245,6 +245,23 @@ void alchemy_sleep_au1000(void); void alchemy_sleep_au1550(void); void au_sleep(void); +/* USB: drivers/usb/host/alchemy-common.c */ +enum alchemy_usb_block { + ALCHEMY_USB_OHCI0, + ALCHEMY_USB_UDC0, + ALCHEMY_USB_EHCI0, + ALCHEMY_USB_OTG0, +}; +int alchemy_usb_control(int block, int enable); + +/* PCI controller platform data */ +struct alchemy_pci_platdata { + int (*board_map_irq)(const struct pci_dev *d, u8 slot, u8 pin); + int (*board_pci_idsel)(unsigned int devsel, int assert); + /* bits to set/clear in PCI_CONFIG register */ + unsigned long pci_cfg_set; + unsigned long pci_cfg_clr; +}; /* SOC Interrupt numbers */ @@ -575,38 +592,95 @@ enum soc_au1200_ints { #endif /* !defined (_LANGUAGE_ASSEMBLY) */ /* - * SDRAM register offsets + * Physical base addresses for integrated peripherals + * 0..au1000 1..au1500 2..au1100 3..au1550 4..au1200 */ -#if defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1500) || \ - defined(CONFIG_SOC_AU1100) -#define MEM_SDMODE0 0x0000 -#define MEM_SDMODE1 0x0004 -#define MEM_SDMODE2 0x0008 -#define MEM_SDADDR0 0x000C -#define MEM_SDADDR1 0x0010 -#define MEM_SDADDR2 0x0014 -#define MEM_SDREFCFG 0x0018 -#define MEM_SDPRECMD 0x001C -#define MEM_SDAUTOREF 0x0020 -#define MEM_SDWRMD0 0x0024 -#define MEM_SDWRMD1 0x0028 -#define MEM_SDWRMD2 0x002C -#define MEM_SDSLEEP 0x0030 -#define MEM_SDSMCKE 0x0034 -/* - * MEM_SDMODE register content definitions - */ +#define AU1000_AC97_PHYS_ADDR 0x10000000 /* 012 */ +#define AU1000_USB_OHCI_PHYS_ADDR 0x10100000 /* 012 */ +#define AU1000_USB_UDC_PHYS_ADDR 0x10200000 /* 0123 */ +#define AU1000_IRDA_PHYS_ADDR 0x10300000 /* 02 */ +#define AU1200_AES_PHYS_ADDR 0x10300000 /* 4 */ +#define AU1000_IC0_PHYS_ADDR 0x10400000 /* 01234 */ +#define AU1000_MAC0_PHYS_ADDR 0x10500000 /* 023 */ +#define AU1000_MAC1_PHYS_ADDR 0x10510000 /* 023 */ +#define AU1000_MACEN_PHYS_ADDR 0x10520000 /* 023 */ +#define AU1100_SD0_PHYS_ADDR 0x10600000 /* 24 */ +#define AU1100_SD1_PHYS_ADDR 0x10680000 /* 24 */ +#define AU1550_PSC2_PHYS_ADDR 0x10A00000 /* 3 */ +#define AU1550_PSC3_PHYS_ADDR 0x10B00000 /* 3 */ +#define AU1000_I2S_PHYS_ADDR 0x11000000 /* 02 */ +#define AU1500_MAC0_PHYS_ADDR 0x11500000 /* 1 */ +#define AU1500_MAC1_PHYS_ADDR 0x11510000 /* 1 */ +#define AU1500_MACEN_PHYS_ADDR 0x11520000 /* 1 */ +#define AU1000_UART0_PHYS_ADDR 0x11100000 /* 01234 */ +#define AU1200_SWCNT_PHYS_ADDR 0x1110010C /* 4 */ +#define AU1000_UART1_PHYS_ADDR 0x11200000 /* 0234 */ +#define AU1000_UART2_PHYS_ADDR 0x11300000 /* 0 */ +#define AU1000_UART3_PHYS_ADDR 0x11400000 /* 0123 */ +#define AU1000_SSI0_PHYS_ADDR 0x11600000 /* 02 */ +#define AU1000_SSI1_PHYS_ADDR 0x11680000 /* 02 */ +#define AU1500_GPIO2_PHYS_ADDR 0x11700000 /* 1234 */ +#define AU1000_IC1_PHYS_ADDR 0x11800000 /* 01234 */ +#define AU1000_SYS_PHYS_ADDR 0x11900000 /* 01234 */ +#define AU1550_PSC0_PHYS_ADDR 0x11A00000 /* 34 */ +#define AU1550_PSC1_PHYS_ADDR 0x11B00000 /* 34 */ +#define AU1000_MEM_PHYS_ADDR 0x14000000 /* 01234 */ +#define AU1000_STATIC_MEM_PHYS_ADDR 0x14001000 /* 01234 */ +#define AU1000_DMA_PHYS_ADDR 0x14002000 /* 012 */ +#define AU1550_DBDMA_PHYS_ADDR 0x14002000 /* 34 */ +#define AU1550_DBDMA_CONF_PHYS_ADDR 0x14003000 /* 34 */ +#define AU1000_MACDMA0_PHYS_ADDR 0x14004000 /* 0123 */ +#define AU1000_MACDMA1_PHYS_ADDR 0x14004200 /* 0123 */ +#define AU1200_CIM_PHYS_ADDR 0x14004000 /* 4 */ +#define AU1500_PCI_PHYS_ADDR 0x14005000 /* 13 */ +#define AU1550_PE_PHYS_ADDR 0x14008000 /* 3 */ +#define AU1200_MAEBE_PHYS_ADDR 0x14010000 /* 4 */ +#define AU1200_MAEFE_PHYS_ADDR 0x14012000 /* 4 */ +#define AU1550_USB_OHCI_PHYS_ADDR 0x14020000 /* 3 */ +#define AU1200_USB_CTL_PHYS_ADDR 0x14020000 /* 4 */ +#define AU1200_USB_OTG_PHYS_ADDR 0x14020020 /* 4 */ +#define AU1200_USB_OHCI_PHYS_ADDR 0x14020100 /* 4 */ +#define AU1200_USB_EHCI_PHYS_ADDR 0x14020200 /* 4 */ +#define AU1200_USB_UDC_PHYS_ADDR 0x14022000 /* 4 */ +#define AU1100_LCD_PHYS_ADDR 0x15000000 /* 2 */ +#define AU1200_LCD_PHYS_ADDR 0x15000000 /* 4 */ +#define AU1500_PCI_MEM_PHYS_ADDR 0x400000000ULL /* 13 */ +#define AU1500_PCI_IO_PHYS_ADDR 0x500000000ULL /* 13 */ +#define AU1500_PCI_CONFIG0_PHYS_ADDR 0x600000000ULL /* 13 */ +#define AU1500_PCI_CONFIG1_PHYS_ADDR 0x680000000ULL /* 13 */ +#define AU1000_PCMCIA_IO_PHYS_ADDR 0xF00000000ULL /* 01234 */ +#define AU1000_PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL /* 01234 */ +#define AU1000_PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL /* 01234 */ + + +/* Au1000 SDRAM memory controller register offsets */ +#define AU1000_MEM_SDMODE0 0x0000 +#define AU1000_MEM_SDMODE1 0x0004 +#define AU1000_MEM_SDMODE2 0x0008 +#define AU1000_MEM_SDADDR0 0x000C +#define AU1000_MEM_SDADDR1 0x0010 +#define AU1000_MEM_SDADDR2 0x0014 +#define AU1000_MEM_SDREFCFG 0x0018 +#define AU1000_MEM_SDPRECMD 0x001C +#define AU1000_MEM_SDAUTOREF 0x0020 +#define AU1000_MEM_SDWRMD0 0x0024 +#define AU1000_MEM_SDWRMD1 0x0028 +#define AU1000_MEM_SDWRMD2 0x002C +#define AU1000_MEM_SDSLEEP 0x0030 +#define AU1000_MEM_SDSMCKE 0x0034 + +/* MEM_SDMODE register content definitions */ #define MEM_SDMODE_F (1 << 22) #define MEM_SDMODE_SR (1 << 21) #define MEM_SDMODE_BS (1 << 20) #define MEM_SDMODE_RS (3 << 18) #define MEM_SDMODE_CS (7 << 15) -#define MEM_SDMODE_TRAS (15 << 11) -#define MEM_SDMODE_TMRD (3 << 9) +#define MEM_SDMODE_TRAS (15 << 11) +#define MEM_SDMODE_TMRD (3 << 9) #define MEM_SDMODE_TWR (3 << 7) #define MEM_SDMODE_TRP (3 << 5) -#define MEM_SDMODE_TRCD (3 << 3) +#define MEM_SDMODE_TRCD (3 << 3) #define MEM_SDMODE_TCL (7 << 0) #define MEM_SDMODE_BS_2Bank (0 << 20) @@ -628,173 +702,43 @@ enum soc_au1200_ints { #define MEM_SDMODE_TRCD_N(N) ((N) << 3) #define MEM_SDMODE_TCL_N(N) ((N) << 0) -/* - * MEM_SDADDR register contents definitions - */ +/* MEM_SDADDR register contents definitions */ #define MEM_SDADDR_E (1 << 20) -#define MEM_SDADDR_CSBA (0x03FF << 10) +#define MEM_SDADDR_CSBA (0x03FF << 10) #define MEM_SDADDR_CSMASK (0x03FF << 0) #define MEM_SDADDR_CSBA_N(N) ((N) & (0x03FF << 22) >> 12) #define MEM_SDADDR_CSMASK_N(N) ((N)&(0x03FF << 22) >> 22) -/* - * MEM_SDREFCFG register content definitions - */ +/* MEM_SDREFCFG register content definitions */ #define MEM_SDREFCFG_TRC (15 << 28) #define MEM_SDREFCFG_TRPM (3 << 26) #define MEM_SDREFCFG_E (1 << 25) -#define MEM_SDREFCFG_RE (0x1ffffff << 0) +#define MEM_SDREFCFG_RE (0x1ffffff << 0) #define MEM_SDREFCFG_TRC_N(N) ((N) << MEM_SDREFCFG_TRC) #define MEM_SDREFCFG_TRPM_N(N) ((N) << MEM_SDREFCFG_TRPM) #define MEM_SDREFCFG_REF_N(N) (N) -#endif - -/***********************************************************************/ -/* - * Au1550 SDRAM Register Offsets - */ - -/***********************************************************************/ - -#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) -#define MEM_SDMODE0 0x0800 -#define MEM_SDMODE1 0x0808 -#define MEM_SDMODE2 0x0810 -#define MEM_SDADDR0 0x0820 -#define MEM_SDADDR1 0x0828 -#define MEM_SDADDR2 0x0830 -#define MEM_SDCONFIGA 0x0840 -#define MEM_SDCONFIGB 0x0848 -#define MEM_SDSTAT 0x0850 -#define MEM_SDERRADDR 0x0858 -#define MEM_SDSTRIDE0 0x0860 -#define MEM_SDSTRIDE1 0x0868 -#define MEM_SDSTRIDE2 0x0870 -#define MEM_SDWRMD0 0x0880 -#define MEM_SDWRMD1 0x0888 -#define MEM_SDWRMD2 0x0890 -#define MEM_SDPRECMD 0x08C0 -#define MEM_SDAUTOREF 0x08C8 -#define MEM_SDSREF 0x08D0 -#define MEM_SDSLEEP MEM_SDSREF - -#endif - -/* - * Physical base addresses for integrated peripherals - * 0..au1000 1..au1500 2..au1100 3..au1550 4..au1200 - */ - -#define AU1000_AC97_PHYS_ADDR 0x10000000 /* 012 */ -#define AU1000_USBD_PHYS_ADDR 0x10200000 /* 0123 */ -#define AU1000_IC0_PHYS_ADDR 0x10400000 /* 01234 */ -#define AU1000_MAC0_PHYS_ADDR 0x10500000 /* 023 */ -#define AU1000_MAC1_PHYS_ADDR 0x10510000 /* 023 */ -#define AU1000_MACEN_PHYS_ADDR 0x10520000 /* 023 */ -#define AU1100_SD0_PHYS_ADDR 0x10600000 /* 24 */ -#define AU1100_SD1_PHYS_ADDR 0x10680000 /* 24 */ -#define AU1000_I2S_PHYS_ADDR 0x11000000 /* 02 */ -#define AU1500_MAC0_PHYS_ADDR 0x11500000 /* 1 */ -#define AU1500_MAC1_PHYS_ADDR 0x11510000 /* 1 */ -#define AU1500_MACEN_PHYS_ADDR 0x11520000 /* 1 */ -#define AU1000_UART0_PHYS_ADDR 0x11100000 /* 01234 */ -#define AU1000_UART1_PHYS_ADDR 0x11200000 /* 0234 */ -#define AU1000_UART2_PHYS_ADDR 0x11300000 /* 0 */ -#define AU1000_UART3_PHYS_ADDR 0x11400000 /* 0123 */ -#define AU1500_GPIO2_PHYS_ADDR 0x11700000 /* 1234 */ -#define AU1000_IC1_PHYS_ADDR 0x11800000 /* 01234 */ -#define AU1000_SYS_PHYS_ADDR 0x11900000 /* 01234 */ -#define AU1000_DMA_PHYS_ADDR 0x14002000 /* 012 */ -#define AU1550_DBDMA_PHYS_ADDR 0x14002000 /* 34 */ -#define AU1550_DBDMA_CONF_PHYS_ADDR 0x14003000 /* 34 */ -#define AU1000_MACDMA0_PHYS_ADDR 0x14004000 /* 0123 */ -#define AU1000_MACDMA1_PHYS_ADDR 0x14004200 /* 0123 */ - - -#ifdef CONFIG_SOC_AU1000 -#define MEM_PHYS_ADDR 0x14000000 -#define STATIC_MEM_PHYS_ADDR 0x14001000 -#define USBH_PHYS_ADDR 0x10100000 -#define IRDA_PHYS_ADDR 0x10300000 -#define SSI0_PHYS_ADDR 0x11600000 -#define SSI1_PHYS_ADDR 0x11680000 -#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL -#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL -#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL -#endif - -/********************************************************************/ - -#ifdef CONFIG_SOC_AU1500 -#define MEM_PHYS_ADDR 0x14000000 -#define STATIC_MEM_PHYS_ADDR 0x14001000 -#define USBH_PHYS_ADDR 0x10100000 -#define PCI_PHYS_ADDR 0x14005000 -#define PCI_MEM_PHYS_ADDR 0x400000000ULL -#define PCI_IO_PHYS_ADDR 0x500000000ULL -#define PCI_CONFIG0_PHYS_ADDR 0x600000000ULL -#define PCI_CONFIG1_PHYS_ADDR 0x680000000ULL -#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL -#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL -#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL -#endif - -/********************************************************************/ - -#ifdef CONFIG_SOC_AU1100 -#define MEM_PHYS_ADDR 0x14000000 -#define STATIC_MEM_PHYS_ADDR 0x14001000 -#define USBH_PHYS_ADDR 0x10100000 -#define IRDA_PHYS_ADDR 0x10300000 -#define SSI0_PHYS_ADDR 0x11600000 -#define SSI1_PHYS_ADDR 0x11680000 -#define LCD_PHYS_ADDR 0x15000000 -#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL -#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL -#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL -#endif - -/***********************************************************************/ - -#ifdef CONFIG_SOC_AU1550 -#define MEM_PHYS_ADDR 0x14000000 -#define STATIC_MEM_PHYS_ADDR 0x14001000 -#define USBH_PHYS_ADDR 0x14020000 -#define PCI_PHYS_ADDR 0x14005000 -#define PE_PHYS_ADDR 0x14008000 -#define PSC0_PHYS_ADDR 0x11A00000 -#define PSC1_PHYS_ADDR 0x11B00000 -#define PSC2_PHYS_ADDR 0x10A00000 -#define PSC3_PHYS_ADDR 0x10B00000 -#define PCI_MEM_PHYS_ADDR 0x400000000ULL -#define PCI_IO_PHYS_ADDR 0x500000000ULL -#define PCI_CONFIG0_PHYS_ADDR 0x600000000ULL -#define PCI_CONFIG1_PHYS_ADDR 0x680000000ULL -#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL -#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL -#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL -#endif - -/***********************************************************************/ - -#ifdef CONFIG_SOC_AU1200 -#define MEM_PHYS_ADDR 0x14000000 -#define STATIC_MEM_PHYS_ADDR 0x14001000 -#define AES_PHYS_ADDR 0x10300000 -#define CIM_PHYS_ADDR 0x14004000 -#define USBM_PHYS_ADDR 0x14020000 -#define USBH_PHYS_ADDR 0x14020100 -#define PSC0_PHYS_ADDR 0x11A00000 -#define PSC1_PHYS_ADDR 0x11B00000 -#define LCD_PHYS_ADDR 0x15000000 -#define SWCNT_PHYS_ADDR 0x1110010C -#define MAEFE_PHYS_ADDR 0x14012000 -#define MAEBE_PHYS_ADDR 0x14010000 -#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL -#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL -#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL -#endif +/* Au1550 SDRAM Register Offsets */ +#define AU1550_MEM_SDMODE0 0x0800 +#define AU1550_MEM_SDMODE1 0x0808 +#define AU1550_MEM_SDMODE2 0x0810 +#define AU1550_MEM_SDADDR0 0x0820 +#define AU1550_MEM_SDADDR1 0x0828 +#define AU1550_MEM_SDADDR2 0x0830 +#define AU1550_MEM_SDCONFIGA 0x0840 +#define AU1550_MEM_SDCONFIGB 0x0848 +#define AU1550_MEM_SDSTAT 0x0850 +#define AU1550_MEM_SDERRADDR 0x0858 +#define AU1550_MEM_SDSTRIDE0 0x0860 +#define AU1550_MEM_SDSTRIDE1 0x0868 +#define AU1550_MEM_SDSTRIDE2 0x0870 +#define AU1550_MEM_SDWRMD0 0x0880 +#define AU1550_MEM_SDWRMD1 0x0888 +#define AU1550_MEM_SDWRMD2 0x0890 +#define AU1550_MEM_SDPRECMD 0x08C0 +#define AU1550_MEM_SDAUTOREF 0x08C8 +#define AU1550_MEM_SDSREF 0x08D0 +#define AU1550_MEM_SDSLEEP MEM_SDSREF /* Static Bus Controller */ #define MEM_STCFG0 0xB4001000 @@ -813,81 +757,14 @@ enum soc_au1200_ints { #define MEM_STTIME3 0xB4001034 #define MEM_STADDR3 0xB4001038 -#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) #define MEM_STNDCTL 0xB4001100 #define MEM_STSTAT 0xB4001104 #define MEM_STNAND_CMD 0x0 #define MEM_STNAND_ADDR 0x4 #define MEM_STNAND_DATA 0x20 -#endif - - -/* Au1000 */ -#ifdef CONFIG_SOC_AU1000 - -#define USB_OHCI_BASE 0x10100000 /* phys addr for ioremap */ -#define USB_HOST_CONFIG 0xB017FFFC -#define FOR_PLATFORM_C_USB_HOST_INT AU1000_USB_HOST_INT -#endif /* CONFIG_SOC_AU1000 */ - -/* Au1500 */ -#ifdef CONFIG_SOC_AU1500 - -#define USB_OHCI_BASE 0x10100000 /* phys addr for ioremap */ -#define USB_HOST_CONFIG 0xB017fffc -#define FOR_PLATFORM_C_USB_HOST_INT AU1500_USB_HOST_INT -#endif /* CONFIG_SOC_AU1500 */ - -/* Au1100 */ -#ifdef CONFIG_SOC_AU1100 - -#define USB_OHCI_BASE 0x10100000 /* phys addr for ioremap */ -#define USB_HOST_CONFIG 0xB017FFFC -#define FOR_PLATFORM_C_USB_HOST_INT AU1100_USB_HOST_INT -#endif /* CONFIG_SOC_AU1100 */ - -#ifdef CONFIG_SOC_AU1550 - -#define USB_OHCI_BASE 0x14020000 /* phys addr for ioremap */ -#define USB_OHCI_LEN 0x00060000 -#define USB_HOST_CONFIG 0xB4027ffc -#define FOR_PLATFORM_C_USB_HOST_INT AU1550_USB_HOST_INT -#endif /* CONFIG_SOC_AU1550 */ - - -#ifdef CONFIG_SOC_AU1200 - -#define USB_UOC_BASE 0x14020020 -#define USB_UOC_LEN 0x20 -#define USB_OHCI_BASE 0x14020100 -#define USB_OHCI_LEN 0x100 -#define USB_EHCI_BASE 0x14020200 -#define USB_EHCI_LEN 0x100 -#define USB_UDC_BASE 0x14022000 -#define USB_UDC_LEN 0x2000 -#define USB_MSR_BASE 0xB4020000 -#define USB_MSR_MCFG 4 -#define USBMSRMCFG_OMEMEN 0 -#define USBMSRMCFG_OBMEN 1 -#define USBMSRMCFG_EMEMEN 2 -#define USBMSRMCFG_EBMEN 3 -#define USBMSRMCFG_DMEMEN 4 -#define USBMSRMCFG_DBMEN 5 -#define USBMSRMCFG_GMEMEN 6 -#define USBMSRMCFG_OHCCLKEN 16 -#define USBMSRMCFG_EHCCLKEN 17 -#define USBMSRMCFG_UDCCLKEN 18 -#define USBMSRMCFG_PHYPLLEN 19 -#define USBMSRMCFG_RDCOMB 30 -#define USBMSRMCFG_PFEN 31 - -#define FOR_PLATFORM_C_USB_HOST_INT AU1200_USB_INT - -#endif /* CONFIG_SOC_AU1200 */ - /* Programmable Counters 0 and 1 */ #define SYS_BASE 0xB1900000 #define SYS_COUNTER_CNTRL (SYS_BASE + 0x14) @@ -958,56 +835,6 @@ enum soc_au1200_ints { # define I2S_CONTROL_D (1 << 1) # define I2S_CONTROL_CE (1 << 0) -/* USB Host Controller */ -#ifndef USB_OHCI_LEN -#define USB_OHCI_LEN 0x00100000 -#endif - -#ifndef CONFIG_SOC_AU1200 - -/* USB Device Controller */ -#define USBD_EP0RD 0xB0200000 -#define USBD_EP0WR 0xB0200004 -#define USBD_EP2WR 0xB0200008 -#define USBD_EP3WR 0xB020000C -#define USBD_EP4RD 0xB0200010 -#define USBD_EP5RD 0xB0200014 -#define USBD_INTEN 0xB0200018 -#define USBD_INTSTAT 0xB020001C -# define USBDEV_INT_SOF (1 << 12) -# define USBDEV_INT_HF_BIT 6 -# define USBDEV_INT_HF_MASK (0x3f << USBDEV_INT_HF_BIT) -# define USBDEV_INT_CMPLT_BIT 0 -# define USBDEV_INT_CMPLT_MASK (0x3f << USBDEV_INT_CMPLT_BIT) -#define USBD_CONFIG 0xB0200020 -#define USBD_EP0CS 0xB0200024 -#define USBD_EP2CS 0xB0200028 -#define USBD_EP3CS 0xB020002C -#define USBD_EP4CS 0xB0200030 -#define USBD_EP5CS 0xB0200034 -# define USBDEV_CS_SU (1 << 14) -# define USBDEV_CS_NAK (1 << 13) -# define USBDEV_CS_ACK (1 << 12) -# define USBDEV_CS_BUSY (1 << 11) -# define USBDEV_CS_TSIZE_BIT 1 -# define USBDEV_CS_TSIZE_MASK (0x3ff << USBDEV_CS_TSIZE_BIT) -# define USBDEV_CS_STALL (1 << 0) -#define USBD_EP0RDSTAT 0xB0200040 -#define USBD_EP0WRSTAT 0xB0200044 -#define USBD_EP2WRSTAT 0xB0200048 -#define USBD_EP3WRSTAT 0xB020004C -#define USBD_EP4RDSTAT 0xB0200050 -#define USBD_EP5RDSTAT 0xB0200054 -# define USBDEV_FSTAT_FLUSH (1 << 6) -# define USBDEV_FSTAT_UF (1 << 5) -# define USBDEV_FSTAT_OF (1 << 4) -# define USBDEV_FSTAT_FCNT_BIT 0 -# define USBDEV_FSTAT_FCNT_MASK (0x0f << USBDEV_FSTAT_FCNT_BIT) -#define USBD_ENABLE 0xB0200058 -# define USBDEV_ENABLE (1 << 1) -# define USBDEV_CE (1 << 0) - -#endif /* !CONFIG_SOC_AU1200 */ /* Ethernet Controllers */ @@ -1322,7 +1149,6 @@ enum soc_au1200_ints { # define SYS_PF_MUST_BE_SET ((1 << 5) | (1 << 2)) /* Au1200 only */ -#ifdef CONFIG_SOC_AU1200 #define SYS_PINFUNC_DMA (1 << 31) #define SYS_PINFUNC_S0A (1 << 30) #define SYS_PINFUNC_S1A (1 << 29) @@ -1350,7 +1176,6 @@ enum soc_au1200_ints { #define SYS_PINFUNC_P0B (1 << 4) #define SYS_PINFUNC_U0T (1 << 3) #define SYS_PINFUNC_S1B (1 << 2) -#endif /* Power Management */ #define SYS_SCRATCH0 0xB1900018 @@ -1406,12 +1231,12 @@ enum soc_au1200_ints { # define SYS_CS_MI2_MASK (0x7 << SYS_CS_MI2_BIT) # define SYS_CS_DI2 (1 << 16) # define SYS_CS_CI2 (1 << 15) -#ifdef CONFIG_SOC_AU1100 + # define SYS_CS_ML_BIT 7 # define SYS_CS_ML_MASK (0x7 << SYS_CS_ML_BIT) # define SYS_CS_DL (1 << 6) # define SYS_CS_CL (1 << 5) -#else + # define SYS_CS_MUH_BIT 12 # define SYS_CS_MUH_MASK (0x7 << SYS_CS_MUH_BIT) # define SYS_CS_DUH (1 << 11) @@ -1420,7 +1245,7 @@ enum soc_au1200_ints { # define SYS_CS_MUD_MASK (0x7 << SYS_CS_MUD_BIT) # define SYS_CS_DUD (1 << 6) # define SYS_CS_CUD (1 << 5) -#endif + # define SYS_CS_MIR_BIT 2 # define SYS_CS_MIR_MASK (0x7 << SYS_CS_MIR_BIT) # define SYS_CS_DIR (1 << 1) @@ -1467,58 +1292,30 @@ enum soc_au1200_ints { # define AC97C_RS (1 << 1) # define AC97C_CE (1 << 0) -#if defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550) -/* Au1500 PCI Controller */ -#define Au1500_CFG_BASE 0xB4005000 /* virtual, KSEG1 addr */ -#define Au1500_PCI_CMEM (Au1500_CFG_BASE + 0) -#define Au1500_PCI_CFG (Au1500_CFG_BASE + 4) -# define PCI_ERROR ((1 << 22) | (1 << 23) | (1 << 24) | \ - (1 << 25) | (1 << 26) | (1 << 27)) -#define Au1500_PCI_B2BMASK_CCH (Au1500_CFG_BASE + 8) -#define Au1500_PCI_B2B0_VID (Au1500_CFG_BASE + 0xC) -#define Au1500_PCI_B2B1_ID (Au1500_CFG_BASE + 0x10) -#define Au1500_PCI_MWMASK_DEV (Au1500_CFG_BASE + 0x14) -#define Au1500_PCI_MWBASE_REV_CCL (Au1500_CFG_BASE + 0x18) -#define Au1500_PCI_ERR_ADDR (Au1500_CFG_BASE + 0x1C) -#define Au1500_PCI_SPEC_INTACK (Au1500_CFG_BASE + 0x20) -#define Au1500_PCI_ID (Au1500_CFG_BASE + 0x100) -#define Au1500_PCI_STATCMD (Au1500_CFG_BASE + 0x104) -#define Au1500_PCI_CLASSREV (Au1500_CFG_BASE + 0x108) -#define Au1500_PCI_HDRTYPE (Au1500_CFG_BASE + 0x10C) -#define Au1500_PCI_MBAR (Au1500_CFG_BASE + 0x110) - -#define Au1500_PCI_HDR 0xB4005100 /* virtual, KSEG1 addr */ -/* - * All of our structures, like PCI resource, have 32-bit members. - * Drivers are expected to do an ioremap on the PCI MEM resource, but it's - * hard to store 0x4 0000 0000 in a 32-bit type. We require a small patch - * to __ioremap to check for addresses between (u32)Au1500_PCI_MEM_START and - * (u32)Au1500_PCI_MEM_END and change those to the full 36-bit PCI MEM - * addresses. For PCI I/O, it's simpler because we get to do the ioremap - * ourselves and then adjust the device's resources. +/* The PCI chip selects are outside the 32bit space, and since we can't + * just program the 36bit addresses into BARs, we have to take a chunk + * out of the 32bit space and reserve it for PCI. When these addresses + * are ioremap()ed, they'll be fixed up to the real 36bit address before + * being passed to the real ioremap function. */ -#define Au1500_EXT_CFG 0x600000000ULL -#define Au1500_EXT_CFG_TYPE1 0x680000000ULL -#define Au1500_PCI_IO_START 0x500000000ULL -#define Au1500_PCI_IO_END 0x5000FFFFFULL -#define Au1500_PCI_MEM_START 0x440000000ULL -#define Au1500_PCI_MEM_END 0x44FFFFFFFULL +#define ALCHEMY_PCI_MEMWIN_START (AU1500_PCI_MEM_PHYS_ADDR >> 4) +#define ALCHEMY_PCI_MEMWIN_END (ALCHEMY_PCI_MEMWIN_START + 0x0FFFFFFF) -#define PCI_IO_START 0x00001000 -#define PCI_IO_END 0x000FFFFF -#define PCI_MEM_START 0x40000000 -#define PCI_MEM_END 0x4FFFFFFF +/* for PCI IO it's simpler because we get to do the ioremap ourselves and then + * adjust the device's resources. + */ +#define ALCHEMY_PCI_IOWIN_START 0x00001000 +#define ALCHEMY_PCI_IOWIN_END 0x0000FFFF -#define PCI_FIRST_DEVFN (0 << 3) -#define PCI_LAST_DEVFN (19 << 3) +#ifdef CONFIG_PCI #define IOPORT_RESOURCE_START 0x00001000 /* skip legacy probing */ #define IOPORT_RESOURCE_END 0xffffffff #define IOMEM_RESOURCE_START 0x10000000 #define IOMEM_RESOURCE_END 0xfffffffffULL -#else /* Au1000 and Au1100 and Au1200 */ +#else /* Don't allow any legacy ports probing */ #define IOPORT_RESOURCE_START 0x10000000 @@ -1526,13 +1323,77 @@ enum soc_au1200_ints { #define IOMEM_RESOURCE_START 0x10000000 #define IOMEM_RESOURCE_END 0xfffffffffULL -#define PCI_IO_START 0 -#define PCI_IO_END 0 -#define PCI_MEM_START 0 -#define PCI_MEM_END 0 -#define PCI_FIRST_DEVFN 0 -#define PCI_LAST_DEVFN 0 - #endif +/* PCI controller block register offsets */ +#define PCI_REG_CMEM 0x0000 +#define PCI_REG_CONFIG 0x0004 +#define PCI_REG_B2BMASK_CCH 0x0008 +#define PCI_REG_B2BBASE0_VID 0x000C +#define PCI_REG_B2BBASE1_SID 0x0010 +#define PCI_REG_MWMASK_DEV 0x0014 +#define PCI_REG_MWBASE_REV_CCL 0x0018 +#define PCI_REG_ERR_ADDR 0x001C +#define PCI_REG_SPEC_INTACK 0x0020 +#define PCI_REG_ID 0x0100 +#define PCI_REG_STATCMD 0x0104 +#define PCI_REG_CLASSREV 0x0108 +#define PCI_REG_PARAM 0x010C +#define PCI_REG_MBAR 0x0110 +#define PCI_REG_TIMEOUT 0x0140 + +/* PCI controller block register bits */ +#define PCI_CMEM_E (1 << 28) /* enable cacheable memory */ +#define PCI_CMEM_CMBASE(x) (((x) & 0x3fff) << 14) +#define PCI_CMEM_CMMASK(x) ((x) & 0x3fff) +#define PCI_CONFIG_ERD (1 << 27) /* pci error during R/W */ +#define PCI_CONFIG_ET (1 << 26) /* error in target mode */ +#define PCI_CONFIG_EF (1 << 25) /* fatal error */ +#define PCI_CONFIG_EP (1 << 24) /* parity error */ +#define PCI_CONFIG_EM (1 << 23) /* multiple errors */ +#define PCI_CONFIG_BM (1 << 22) /* bad master error */ +#define PCI_CONFIG_PD (1 << 20) /* PCI Disable */ +#define PCI_CONFIG_BME (1 << 19) /* Byte Mask Enable for reads */ +#define PCI_CONFIG_NC (1 << 16) /* mark mem access non-coherent */ +#define PCI_CONFIG_IA (1 << 15) /* INTA# enabled (target mode) */ +#define PCI_CONFIG_IP (1 << 13) /* int on PCI_PERR# */ +#define PCI_CONFIG_IS (1 << 12) /* int on PCI_SERR# */ +#define PCI_CONFIG_IMM (1 << 11) /* int on master abort */ +#define PCI_CONFIG_ITM (1 << 10) /* int on target abort (as master) */ +#define PCI_CONFIG_ITT (1 << 9) /* int on target abort (as target) */ +#define PCI_CONFIG_IPB (1 << 8) /* int on PERR# in bus master acc */ +#define PCI_CONFIG_SIC_NO (0 << 6) /* no byte mask changes */ +#define PCI_CONFIG_SIC_BA_ADR (1 << 6) /* on byte/hw acc, invert adr bits */ +#define PCI_CONFIG_SIC_HWA_DAT (2 << 6) /* on halfword acc, swap data */ +#define PCI_CONFIG_SIC_ALL (3 << 6) /* swap data bytes on all accesses */ +#define PCI_CONFIG_ST (1 << 5) /* swap data by target transactions */ +#define PCI_CONFIG_SM (1 << 4) /* swap data from PCI ctl */ +#define PCI_CONFIG_AEN (1 << 3) /* enable internal arbiter */ +#define PCI_CONFIG_R2H (1 << 2) /* REQ2# to hi-prio arbiter */ +#define PCI_CONFIG_R1H (1 << 1) /* REQ1# to hi-prio arbiter */ +#define PCI_CONFIG_CH (1 << 0) /* PCI ctl to hi-prio arbiter */ +#define PCI_B2BMASK_B2BMASK(x) (((x) & 0xffff) << 16) +#define PCI_B2BMASK_CCH(x) ((x) & 0xffff) /* 16 upper bits of class code */ +#define PCI_B2BBASE0_VID_B0(x) (((x) & 0xffff) << 16) +#define PCI_B2BBASE0_VID_SV(x) ((x) & 0xffff) +#define PCI_B2BBASE1_SID_B1(x) (((x) & 0xffff) << 16) +#define PCI_B2BBASE1_SID_SI(x) ((x) & 0xffff) +#define PCI_MWMASKDEV_MWMASK(x) (((x) & 0xffff) << 16) +#define PCI_MWMASKDEV_DEVID(x) ((x) & 0xffff) +#define PCI_MWBASEREVCCL_BASE(x) (((x) & 0xffff) << 16) +#define PCI_MWBASEREVCCL_REV(x) (((x) & 0xff) << 8) +#define PCI_MWBASEREVCCL_CCL(x) ((x) & 0xff) +#define PCI_ID_DID(x) (((x) & 0xffff) << 16) +#define PCI_ID_VID(x) ((x) & 0xffff) +#define PCI_STATCMD_STATUS(x) (((x) & 0xffff) << 16) +#define PCI_STATCMD_CMD(x) ((x) & 0xffff) +#define PCI_CLASSREV_CLASS(x) (((x) & 0x00ffffff) << 8) +#define PCI_CLASSREV_REV(x) ((x) & 0xff) +#define PCI_PARAM_BIST(x) (((x) & 0xff) << 24) +#define PCI_PARAM_HT(x) (((x) & 0xff) << 16) +#define PCI_PARAM_LT(x) (((x) & 0xff) << 8) +#define PCI_PARAM_CLS(x) ((x) & 0xff) +#define PCI_TIMEOUT_RETRIES(x) (((x) & 0xff) << 8) /* max retries */ +#define PCI_TIMEOUT_TO(x) ((x) & 0xff) /* target ready timeout */ + #endif diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx.h b/arch/mips/include/asm/mach-au1x00/au1xxx.h deleted file mode 100644 index 1b3655090ed..00000000000 --- a/arch/mips/include/asm/mach-au1x00/au1xxx.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef _AU1XXX_H_ -#define _AU1XXX_H_ - -#include <asm/mach-au1x00/au1000.h> - -#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) || \ - defined(CONFIG_MIPS_DB1500) || defined(CONFIG_MIPS_DB1550) -#include <asm/mach-db1x00/db1x00.h> - -#elif defined(CONFIG_MIPS_PB1550) -#include <asm/mach-pb1x00/pb1550.h> - -#elif defined(CONFIG_MIPS_PB1200) -#include <asm/mach-pb1x00/pb1200.h> - -#elif defined(CONFIG_MIPS_DB1200) -#include <asm/mach-db1x00/db1200.h> - -#endif - -#endif /* _AU1XXX_H_ */ diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h b/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h index 2fdacfe85e2..323ce2d145f 100644 --- a/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h +++ b/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h @@ -126,66 +126,62 @@ typedef volatile struct au1xxx_ddma_desc { #define SW_STATUS_INUSE (1 << 0) /* Command 0 device IDs. */ -#ifdef CONFIG_SOC_AU1550 -#define DSCR_CMD0_UART0_TX 0 -#define DSCR_CMD0_UART0_RX 1 -#define DSCR_CMD0_UART3_TX 2 -#define DSCR_CMD0_UART3_RX 3 -#define DSCR_CMD0_DMA_REQ0 4 -#define DSCR_CMD0_DMA_REQ1 5 -#define DSCR_CMD0_DMA_REQ2 6 -#define DSCR_CMD0_DMA_REQ3 7 -#define DSCR_CMD0_USBDEV_RX0 8 -#define DSCR_CMD0_USBDEV_TX0 9 -#define DSCR_CMD0_USBDEV_TX1 10 -#define DSCR_CMD0_USBDEV_TX2 11 -#define DSCR_CMD0_USBDEV_RX3 12 -#define DSCR_CMD0_USBDEV_RX4 13 -#define DSCR_CMD0_PSC0_TX 14 -#define DSCR_CMD0_PSC0_RX 15 -#define DSCR_CMD0_PSC1_TX 16 -#define DSCR_CMD0_PSC1_RX 17 -#define DSCR_CMD0_PSC2_TX 18 -#define DSCR_CMD0_PSC2_RX 19 -#define DSCR_CMD0_PSC3_TX 20 -#define DSCR_CMD0_PSC3_RX 21 -#define DSCR_CMD0_PCI_WRITE 22 -#define DSCR_CMD0_NAND_FLASH 23 -#define DSCR_CMD0_MAC0_RX 24 -#define DSCR_CMD0_MAC0_TX 25 -#define DSCR_CMD0_MAC1_RX 26 -#define DSCR_CMD0_MAC1_TX 27 -#endif /* CONFIG_SOC_AU1550 */ - -#ifdef CONFIG_SOC_AU1200 -#define DSCR_CMD0_UART0_TX 0 -#define DSCR_CMD0_UART0_RX 1 -#define DSCR_CMD0_UART1_TX 2 -#define DSCR_CMD0_UART1_RX 3 -#define DSCR_CMD0_DMA_REQ0 4 -#define DSCR_CMD0_DMA_REQ1 5 -#define DSCR_CMD0_MAE_BE 6 -#define DSCR_CMD0_MAE_FE 7 -#define DSCR_CMD0_SDMS_TX0 8 -#define DSCR_CMD0_SDMS_RX0 9 -#define DSCR_CMD0_SDMS_TX1 10 -#define DSCR_CMD0_SDMS_RX1 11 -#define DSCR_CMD0_AES_TX 13 -#define DSCR_CMD0_AES_RX 12 -#define DSCR_CMD0_PSC0_TX 14 -#define DSCR_CMD0_PSC0_RX 15 -#define DSCR_CMD0_PSC1_TX 16 -#define DSCR_CMD0_PSC1_RX 17 -#define DSCR_CMD0_CIM_RXA 18 -#define DSCR_CMD0_CIM_RXB 19 -#define DSCR_CMD0_CIM_RXC 20 -#define DSCR_CMD0_MAE_BOTH 21 -#define DSCR_CMD0_LCD 22 -#define DSCR_CMD0_NAND_FLASH 23 -#define DSCR_CMD0_PSC0_SYNC 24 -#define DSCR_CMD0_PSC1_SYNC 25 -#define DSCR_CMD0_CIM_SYNC 26 -#endif /* CONFIG_SOC_AU1200 */ +#define AU1550_DSCR_CMD0_UART0_TX 0 +#define AU1550_DSCR_CMD0_UART0_RX 1 +#define AU1550_DSCR_CMD0_UART3_TX 2 +#define AU1550_DSCR_CMD0_UART3_RX 3 +#define AU1550_DSCR_CMD0_DMA_REQ0 4 +#define AU1550_DSCR_CMD0_DMA_REQ1 5 +#define AU1550_DSCR_CMD0_DMA_REQ2 6 +#define AU1550_DSCR_CMD0_DMA_REQ3 7 +#define AU1550_DSCR_CMD0_USBDEV_RX0 8 +#define AU1550_DSCR_CMD0_USBDEV_TX0 9 +#define AU1550_DSCR_CMD0_USBDEV_TX1 10 +#define AU1550_DSCR_CMD0_USBDEV_TX2 11 +#define AU1550_DSCR_CMD0_USBDEV_RX3 12 +#define AU1550_DSCR_CMD0_USBDEV_RX4 13 +#define AU1550_DSCR_CMD0_PSC0_TX 14 +#define AU1550_DSCR_CMD0_PSC0_RX 15 +#define AU1550_DSCR_CMD0_PSC1_TX 16 +#define AU1550_DSCR_CMD0_PSC1_RX 17 +#define AU1550_DSCR_CMD0_PSC2_TX 18 +#define AU1550_DSCR_CMD0_PSC2_RX 19 +#define AU1550_DSCR_CMD0_PSC3_TX 20 +#define AU1550_DSCR_CMD0_PSC3_RX 21 +#define AU1550_DSCR_CMD0_PCI_WRITE 22 +#define AU1550_DSCR_CMD0_NAND_FLASH 23 +#define AU1550_DSCR_CMD0_MAC0_RX 24 +#define AU1550_DSCR_CMD0_MAC0_TX 25 +#define AU1550_DSCR_CMD0_MAC1_RX 26 +#define AU1550_DSCR_CMD0_MAC1_TX 27 + +#define AU1200_DSCR_CMD0_UART0_TX 0 +#define AU1200_DSCR_CMD0_UART0_RX 1 +#define AU1200_DSCR_CMD0_UART1_TX 2 +#define AU1200_DSCR_CMD0_UART1_RX 3 +#define AU1200_DSCR_CMD0_DMA_REQ0 4 +#define AU1200_DSCR_CMD0_DMA_REQ1 5 +#define AU1200_DSCR_CMD0_MAE_BE 6 +#define AU1200_DSCR_CMD0_MAE_FE 7 +#define AU1200_DSCR_CMD0_SDMS_TX0 8 +#define AU1200_DSCR_CMD0_SDMS_RX0 9 +#define AU1200_DSCR_CMD0_SDMS_TX1 10 +#define AU1200_DSCR_CMD0_SDMS_RX1 11 +#define AU1200_DSCR_CMD0_AES_TX 13 +#define AU1200_DSCR_CMD0_AES_RX 12 +#define AU1200_DSCR_CMD0_PSC0_TX 14 +#define AU1200_DSCR_CMD0_PSC0_RX 15 +#define AU1200_DSCR_CMD0_PSC1_TX 16 +#define AU1200_DSCR_CMD0_PSC1_RX 17 +#define AU1200_DSCR_CMD0_CIM_RXA 18 +#define AU1200_DSCR_CMD0_CIM_RXB 19 +#define AU1200_DSCR_CMD0_CIM_RXC 20 +#define AU1200_DSCR_CMD0_MAE_BOTH 21 +#define AU1200_DSCR_CMD0_LCD 22 +#define AU1200_DSCR_CMD0_NAND_FLASH 23 +#define AU1200_DSCR_CMD0_PSC0_SYNC 24 +#define AU1200_DSCR_CMD0_PSC1_SYNC 25 +#define AU1200_DSCR_CMD0_CIM_SYNC 26 #define DSCR_CMD0_THROTTLE 30 #define DSCR_CMD0_ALWAYS 31 diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h b/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h index 5656c72de6d..e306384b141 100644 --- a/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h +++ b/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h @@ -58,6 +58,7 @@ typedef struct { #endif int irq; u32 regbase; + int ddma_id; } _auide_hwif; /******************************************************************************/ diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_psc.h b/arch/mips/include/asm/mach-au1x00/au1xxx_psc.h index 5a5cb738642..4e3f3bc26c6 100644 --- a/arch/mips/include/asm/mach-au1x00/au1xxx_psc.h +++ b/arch/mips/include/asm/mach-au1x00/au1xxx_psc.h @@ -33,19 +33,6 @@ #ifndef _AU1000_PSC_H_ #define _AU1000_PSC_H_ -/* The PSC base addresses. */ -#ifdef CONFIG_SOC_AU1550 -#define PSC0_BASE_ADDR 0xb1a00000 -#define PSC1_BASE_ADDR 0xb1b00000 -#define PSC2_BASE_ADDR 0xb0a00000 -#define PSC3_BASE_ADDR 0xb0b00000 -#endif - -#ifdef CONFIG_SOC_AU1200 -#define PSC0_BASE_ADDR 0xb1a00000 -#define PSC1_BASE_ADDR 0xb1b00000 -#endif - /* * The PSC select and control registers are common to all protocols. */ @@ -80,19 +67,6 @@ #define PSC_AC97GPO_OFFSET 0x00000028 #define PSC_AC97GPI_OFFSET 0x0000002c -#define AC97_PSC_SEL (AC97_PSC_BASE + PSC_SEL_OFFSET) -#define AC97_PSC_CTRL (AC97_PSC_BASE + PSC_CTRL_OFFSET) -#define PSC_AC97CFG (AC97_PSC_BASE + PSC_AC97CFG_OFFSET) -#define PSC_AC97MSK (AC97_PSC_BASE + PSC_AC97MSK_OFFSET) -#define PSC_AC97PCR (AC97_PSC_BASE + PSC_AC97PCR_OFFSET) -#define PSC_AC97STAT (AC97_PSC_BASE + PSC_AC97STAT_OFFSET) -#define PSC_AC97EVNT (AC97_PSC_BASE + PSC_AC97EVNT_OFFSET) -#define PSC_AC97TXRX (AC97_PSC_BASE + PSC_AC97TXRX_OFFSET) -#define PSC_AC97CDC (AC97_PSC_BASE + PSC_AC97CDC_OFFSET) -#define PSC_AC97RST (AC97_PSC_BASE + PSC_AC97RST_OFFSET) -#define PSC_AC97GPO (AC97_PSC_BASE + PSC_AC97GPO_OFFSET) -#define PSC_AC97GPI (AC97_PSC_BASE + PSC_AC97GPI_OFFSET) - /* AC97 Config Register. */ #define PSC_AC97CFG_RT_MASK (3 << 30) #define PSC_AC97CFG_RT_FIFO1 (0 << 30) diff --git a/arch/mips/include/asm/mach-au1x00/gpio-au1000.h b/arch/mips/include/asm/mach-au1x00/gpio-au1000.h index 1f41a522906..73853b5a2a3 100644 --- a/arch/mips/include/asm/mach-au1x00/gpio-au1000.h +++ b/arch/mips/include/asm/mach-au1x00/gpio-au1000.h @@ -347,17 +347,6 @@ static inline int alchemy_gpio2_to_irq(int gpio) /**********************************************************************/ -/* On Au1000, Au1500 and Au1100 GPIOs won't work as inputs before - * SYS_PININPUTEN is written to at least once. On Au1550/Au1200 this - * register enables use of GPIOs as wake source. - */ -static inline void alchemy_gpio1_input_enable(void) -{ - void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR); - __raw_writel(0, base + SYS_PININPUTEN); /* the write op is key */ - wmb(); -} - /* GPIO2 shared interrupts and control */ static inline void __alchemy_gpio2_mod_int(int gpio2, int en) @@ -561,6 +550,7 @@ static inline int alchemy_irq_to_gpio(int irq) #ifndef CONFIG_GPIOLIB +#ifdef CONFIG_ALCHEMY_GPIOINT_AU1000 #ifndef CONFIG_ALCHEMY_GPIO_INDIRECT /* case (4) */ @@ -665,24 +655,7 @@ static inline void gpio_unexport(unsigned gpio) #endif /* !CONFIG_ALCHEMY_GPIO_INDIRECT */ - -#else /* CONFIG GPIOLIB */ - - - /* using gpiolib to provide up to 2 gpio_chips for on-chip gpios */ -#ifndef CONFIG_ALCHEMY_GPIO_INDIRECT /* case (2) */ - -/* get everything through gpiolib */ -#define gpio_to_irq __gpio_to_irq -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep -#define irq_to_gpio alchemy_irq_to_gpio - -#include <asm-generic/gpio.h> - -#endif /* !CONFIG_ALCHEMY_GPIO_INDIRECT */ - +#endif /* CONFIG_ALCHEMY_GPIOINT_AU1000 */ #endif /* !CONFIG_GPIOLIB */ diff --git a/arch/mips/include/asm/mach-au1x00/gpio.h b/arch/mips/include/asm/mach-au1x00/gpio.h index c3f60cdc320..fcdc8c4809d 100644 --- a/arch/mips/include/asm/mach-au1x00/gpio.h +++ b/arch/mips/include/asm/mach-au1x00/gpio.h @@ -1,10 +1,83 @@ +/* + * Alchemy GPIO support. + * + * With CONFIG_GPIOLIB=y different types of on-chip GPIO can be supported within + * the same kernel image. + * With CONFIG_GPIOLIB=n, your board must select ALCHEMY_GPIOINT_AU1XXX for the + * appropriate CPU type (AU1000 currently). + */ + #ifndef _ALCHEMY_GPIO_H_ #define _ALCHEMY_GPIO_H_ -#if defined(CONFIG_ALCHEMY_GPIOINT_AU1000) - +#include <asm/mach-au1x00/au1000.h> #include <asm/mach-au1x00/gpio-au1000.h> -#endif +/* On Au1000, Au1500 and Au1100 GPIOs won't work as inputs before + * SYS_PININPUTEN is written to at least once. On Au1550/Au1200/Au1300 this + * register enables use of GPIOs as wake source. + */ +static inline void alchemy_gpio1_input_enable(void) +{ + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR); + __raw_writel(0, base + 0x110); /* the write op is key */ + wmb(); +} + + +/* Linux gpio framework integration. +* +* 4 use cases of Alchemy GPIOS: +*(1) GPIOLIB=y, ALCHEMY_GPIO_INDIRECT=y: +* Board must register gpiochips. +*(2) GPIOLIB=y, ALCHEMY_GPIO_INDIRECT=n: +* A gpiochip for the 75 GPIOs is registered. +* +*(3) GPIOLIB=n, ALCHEMY_GPIO_INDIRECT=y: +* the boards' gpio.h must provide the linux gpio wrapper functions, +* +*(4) GPIOLIB=n, ALCHEMY_GPIO_INDIRECT=n: +* inlinable gpio functions are provided which enable access to the +* Au1300 gpios only by using the numbers straight out of the data- +* sheets. + +* Cases 1 and 3 are intended for boards which want to provide their own +* GPIO namespace and -operations (i.e. for example you have 8 GPIOs +* which are in part provided by spare Au1300 GPIO pins and in part by +* an external FPGA but you still want them to be accssible in linux +* as gpio0-7. The board can of course use the alchemy_gpioX_* functions +* as required). +*/ + +#ifdef CONFIG_GPIOLIB + +/* wraps the cpu-dependent irq_to_gpio functions */ +/* FIXME: gpiolib needs an irq_to_gpio hook */ +static inline int __au_irq_to_gpio(unsigned int irq) +{ + switch (alchemy_get_cputype()) { + case ALCHEMY_CPU_AU1000...ALCHEMY_CPU_AU1200: + return alchemy_irq_to_gpio(irq); + } + return -EINVAL; +} + + +/* using gpiolib to provide up to 2 gpio_chips for on-chip gpios */ +#ifndef CONFIG_ALCHEMY_GPIO_INDIRECT /* case (2) */ + +/* get everything through gpiolib */ +#define gpio_to_irq __gpio_to_irq +#define gpio_get_value __gpio_get_value +#define gpio_set_value __gpio_set_value +#define gpio_cansleep __gpio_cansleep +#define irq_to_gpio __au_irq_to_gpio + +#include <asm-generic/gpio.h> + +#endif /* !CONFIG_ALCHEMY_GPIO_INDIRECT */ + + +#endif /* CONFIG_GPIOLIB */ #endif /* _ALCHEMY_GPIO_H_ */ diff --git a/arch/mips/include/asm/mach-db1x00/db1200.h b/arch/mips/include/asm/mach-db1x00/db1200.h index 3404248f509..7a39657108c 100644 --- a/arch/mips/include/asm/mach-db1x00/db1200.h +++ b/arch/mips/include/asm/mach-db1x00/db1200.h @@ -46,8 +46,6 @@ #define IDE_PHYS_ADDR 0x18800000 #define IDE_REG_SHIFT 5 -#define IDE_DDMA_REQ DSCR_CMD0_DMA_REQ1 -#define IDE_RQSIZE 128 #define DB1200_IDE_PHYS_ADDR IDE_PHYS_ADDR #define DB1200_IDE_PHYS_LEN (16 << IDE_REG_SHIFT) diff --git a/arch/mips/include/asm/mach-db1x00/db1x00.h b/arch/mips/include/asm/mach-db1x00/db1x00.h index a919dac525a..a5affb0568e 100644 --- a/arch/mips/include/asm/mach-db1x00/db1x00.h +++ b/arch/mips/include/asm/mach-db1x00/db1x00.h @@ -31,15 +31,15 @@ #ifdef CONFIG_MIPS_DB1550 -#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX -#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX -#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC3_TX -#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC3_RX +#define DBDMA_AC97_TX_CHAN AU1550_DSCR_CMD0_PSC1_TX +#define DBDMA_AC97_RX_CHAN AU1550_DSCR_CMD0_PSC1_RX +#define DBDMA_I2S_TX_CHAN AU1550_DSCR_CMD0_PSC3_TX +#define DBDMA_I2S_RX_CHAN AU1550_DSCR_CMD0_PSC3_RX -#define SPI_PSC_BASE PSC0_BASE_ADDR -#define AC97_PSC_BASE PSC1_BASE_ADDR -#define SMBUS_PSC_BASE PSC2_BASE_ADDR -#define I2S_PSC_BASE PSC3_BASE_ADDR +#define SPI_PSC_BASE AU1550_PSC0_PHYS_ADDR +#define AC97_PSC_BASE AU1550_PSC1_PHYS_ADDR +#define SMBUS_PSC_BASE AU1550_PSC2_PHYS_ADDR +#define I2S_PSC_BASE AU1550_PSC3_PHYS_ADDR #define NAND_PHYS_ADDR 0x20000000 diff --git a/arch/mips/include/asm/mach-pb1x00/pb1200.h b/arch/mips/include/asm/mach-pb1x00/pb1200.h index fce4332ebb7..374416adb65 100644 --- a/arch/mips/include/asm/mach-pb1x00/pb1200.h +++ b/arch/mips/include/asm/mach-pb1x00/pb1200.h @@ -28,23 +28,23 @@ #include <asm/mach-au1x00/au1000.h> #include <asm/mach-au1x00/au1xxx_psc.h> -#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX -#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX -#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC1_TX -#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC1_RX +#define DBDMA_AC97_TX_CHAN AU1200_DSCR_CMD0_PSC1_TX +#define DBDMA_AC97_RX_CHAN AU1200_DSCR_CMD0_PSC1_RX +#define DBDMA_I2S_TX_CHAN AU1200_DSCR_CMD0_PSC1_TX +#define DBDMA_I2S_RX_CHAN AU1200_DSCR_CMD0_PSC1_RX /* * SPI and SMB are muxed on the Pb1200 board. * Refer to board documentation. */ -#define SPI_PSC_BASE PSC0_BASE_ADDR -#define SMBUS_PSC_BASE PSC0_BASE_ADDR +#define SPI_PSC_BASE AU1550_PSC0_PHYS_ADDR +#define SMBUS_PSC_BASE AU1550_PSC0_PHYS_ADDR /* * AC97 and I2S are muxed on the Pb1200 board. * Refer to board documentation. */ -#define AC97_PSC_BASE PSC1_BASE_ADDR -#define I2S_PSC_BASE PSC1_BASE_ADDR +#define AC97_PSC_BASE AU1550_PSC1_PHYS_ADDR +#define I2S_PSC_BASE AU1550_PSC1_PHYS_ADDR #define BCSR_SYSTEM_VDDI 0x001F @@ -76,8 +76,6 @@ #define IDE_REG_SHIFT 5 #define IDE_PHYS_LEN (16 << IDE_REG_SHIFT) #define IDE_INT PB1200_IDE_INT -#define IDE_DDMA_REQ DSCR_CMD0_DMA_REQ1 -#define IDE_RQSIZE 128 #define NAND_PHYS_ADDR 0x1C000000 diff --git a/arch/mips/include/asm/mach-pb1x00/pb1550.h b/arch/mips/include/asm/mach-pb1x00/pb1550.h index f835c88e959..443b88adebf 100644 --- a/arch/mips/include/asm/mach-pb1x00/pb1550.h +++ b/arch/mips/include/asm/mach-pb1x00/pb1550.h @@ -30,15 +30,15 @@ #include <linux/types.h> #include <asm/mach-au1x00/au1xxx_psc.h> -#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX -#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX -#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC3_TX -#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC3_RX +#define DBDMA_AC97_TX_CHAN AU1550_DSCR_CMD0_PSC1_TX +#define DBDMA_AC97_RX_CHAN AU1550_DSCR_CMD0_PSC1_RX +#define DBDMA_I2S_TX_CHAN AU1550_DSCR_CMD0_PSC3_TX +#define DBDMA_I2S_RX_CHAN AU1550_DSCR_CMD0_PSC3_RX -#define SPI_PSC_BASE PSC0_BASE_ADDR -#define AC97_PSC_BASE PSC1_BASE_ADDR -#define SMBUS_PSC_BASE PSC2_BASE_ADDR -#define I2S_PSC_BASE PSC3_BASE_ADDR +#define SPI_PSC_BASE AU1550_PSC0_PHYS_ADDR +#define AC97_PSC_BASE AU1550_PSC1_PHYS_ADDR +#define SMBUS_PSC_BASE AU1550_PSC2_PHYS_ADDR +#define I2S_PSC_BASE AU1550_PSC3_PHYS_ADDR /* * Timing values as described in databook, * ns value stripped of diff --git a/arch/mips/include/asm/mipsprom.h b/arch/mips/include/asm/mipsprom.h index 146d41b67ad..e93943fabea 100644 --- a/arch/mips/include/asm/mipsprom.h +++ b/arch/mips/include/asm/mipsprom.h @@ -1,5 +1,5 @@ -#ifndef __ASM_MIPS_PROM_H -#define __ASM_MIPS_PROM_H +#ifndef __ASM_MIPSPROM_H +#define __ASM_MIPSPROM_H #define PROM_RESET 0 #define PROM_EXEC 1 @@ -73,4 +73,4 @@ extern char *prom_getenv(char *); -#endif /* __ASM_MIPS_PROM_H */ +#endif /* __ASM_MIPSPROM_H */ diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h index 6a6f8a8f542..2ea7b817feb 100644 --- a/arch/mips/include/asm/mipsregs.h +++ b/arch/mips/include/asm/mipsregs.h @@ -1006,18 +1006,26 @@ do { \ #define write_c0_perfctrl0(val) __write_32bit_c0_register($25, 0, val) #define read_c0_perfcntr0() __read_32bit_c0_register($25, 1) #define write_c0_perfcntr0(val) __write_32bit_c0_register($25, 1, val) +#define read_c0_perfcntr0_64() __read_64bit_c0_register($25, 1) +#define write_c0_perfcntr0_64(val) __write_64bit_c0_register($25, 1, val) #define read_c0_perfctrl1() __read_32bit_c0_register($25, 2) #define write_c0_perfctrl1(val) __write_32bit_c0_register($25, 2, val) #define read_c0_perfcntr1() __read_32bit_c0_register($25, 3) #define write_c0_perfcntr1(val) __write_32bit_c0_register($25, 3, val) +#define read_c0_perfcntr1_64() __read_64bit_c0_register($25, 3) +#define write_c0_perfcntr1_64(val) __write_64bit_c0_register($25, 3, val) #define read_c0_perfctrl2() __read_32bit_c0_register($25, 4) #define write_c0_perfctrl2(val) __write_32bit_c0_register($25, 4, val) #define read_c0_perfcntr2() __read_32bit_c0_register($25, 5) #define write_c0_perfcntr2(val) __write_32bit_c0_register($25, 5, val) +#define read_c0_perfcntr2_64() __read_64bit_c0_register($25, 5) +#define write_c0_perfcntr2_64(val) __write_64bit_c0_register($25, 5, val) #define read_c0_perfctrl3() __read_32bit_c0_register($25, 6) #define write_c0_perfctrl3(val) __write_32bit_c0_register($25, 6, val) #define read_c0_perfcntr3() __read_32bit_c0_register($25, 7) #define write_c0_perfcntr3(val) __write_32bit_c0_register($25, 7, val) +#define read_c0_perfcntr3_64() __read_64bit_c0_register($25, 7) +#define write_c0_perfcntr3_64(val) __write_64bit_c0_register($25, 7, val) /* RM9000 PerfCount performance counter register */ #define read_c0_perfcount() __read_64bit_c0_register($25, 0) diff --git a/arch/mips/include/asm/prom.h b/arch/mips/include/asm/prom.h index 857d9b7858a..7a6e82ef449 100644 --- a/arch/mips/include/asm/prom.h +++ b/arch/mips/include/asm/prom.h @@ -8,8 +8,8 @@ * published by the Free Software Foundation. * */ -#ifndef __ASM_MIPS_PROM_H -#define __ASM_MIPS_PROM_H +#ifndef __ASM_PROM_H +#define __ASM_PROM_H #ifdef CONFIG_OF #include <asm/bootinfo.h> @@ -25,4 +25,4 @@ extern void device_tree_init(void); static inline void device_tree_init(void) { } #endif /* CONFIG_OF */ -#endif /* _ASM_MIPS_PROM_H */ +#endif /* __ASM_PROM_H */ diff --git a/arch/mips/include/asm/regdef.h b/arch/mips/include/asm/regdef.h index 7c8ecb6b9c4..785a5189b37 100644 --- a/arch/mips/include/asm/regdef.h +++ b/arch/mips/include/asm/regdef.h @@ -6,6 +6,8 @@ * Copyright (C) 1985 MIPS Computer Systems, Inc. * Copyright (C) 1994, 95, 99, 2003 by Ralf Baechle * Copyright (C) 1990 - 1992, 1999 Silicon Graphics, Inc. + * Copyright (C) 2011 Wind River Systems, + * written by Ralf Baechle <ralf@linux-mips.org> */ #ifndef _ASM_REGDEF_H #define _ASM_REGDEF_H @@ -30,9 +32,13 @@ #define t2 $10 #define t3 $11 #define t4 $12 +#define ta0 $12 #define t5 $13 +#define ta1 $13 #define t6 $14 +#define ta2 $14 #define t7 $15 +#define ta3 $15 #define s0 $16 /* callee saved */ #define s1 $17 #define s2 $18 diff --git a/arch/mips/jz4740/gpio.c b/arch/mips/jz4740/gpio.c index 4397972949f..e1ddb95c05e 100644 --- a/arch/mips/jz4740/gpio.c +++ b/arch/mips/jz4740/gpio.c @@ -17,8 +17,6 @@ #include <linux/module.h> #include <linux/init.h> -#include <linux/spinlock.h> -#include <linux/syscore_ops.h> #include <linux/io.h> #include <linux/gpio.h> #include <linux/delay.h> @@ -30,6 +28,8 @@ #include <asm/mach-jz4740/base.h> +#include "irq.h" + #define JZ4740_GPIO_BASE_A (32*0) #define JZ4740_GPIO_BASE_B (32*1) #define JZ4740_GPIO_BASE_C (32*2) @@ -77,14 +77,10 @@ struct jz_gpio_chip { unsigned int irq; unsigned int irq_base; - uint32_t wakeup; - uint32_t suspend_mask; uint32_t edge_trigger_both; void __iomem *base; - spinlock_t lock; - struct gpio_chip gpio_chip; }; @@ -102,7 +98,8 @@ static inline struct jz_gpio_chip *gpio_chip_to_jz_gpio_chip(struct gpio_chip *g static inline struct jz_gpio_chip *irq_to_jz_gpio_chip(struct irq_data *data) { - return irq_data_get_irq_chip_data(data); + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(data); + return gc->private; } static inline void jz_gpio_write_bit(unsigned int gpio, unsigned int reg) @@ -304,21 +301,15 @@ static void jz_gpio_irq_demux_handler(unsigned int irq, struct irq_desc *desc) { uint32_t flag; unsigned int gpio_irq; - unsigned int gpio_bank; struct jz_gpio_chip *chip = irq_desc_get_handler_data(desc); - gpio_bank = JZ4740_IRQ_GPIO0 - irq; - flag = readl(chip->base + JZ_REG_GPIO_FLAG); - if (!flag) return; - gpio_irq = __fls(flag); + gpio_irq = chip->irq_base + __fls(flag); - jz_gpio_check_trigger_both(chip, irq); - - gpio_irq += (gpio_bank << 5) + JZ4740_IRQ_GPIO(0); + jz_gpio_check_trigger_both(chip, gpio_irq); generic_handle_irq(gpio_irq); }; @@ -329,18 +320,12 @@ static inline void jz_gpio_set_irq_bit(struct irq_data *data, unsigned int reg) writel(IRQ_TO_BIT(data->irq), chip->base + reg); } -static void jz_gpio_irq_mask(struct irq_data *data) -{ - jz_gpio_set_irq_bit(data, JZ_REG_GPIO_MASK_SET); -}; - static void jz_gpio_irq_unmask(struct irq_data *data) { struct jz_gpio_chip *chip = irq_to_jz_gpio_chip(data); jz_gpio_check_trigger_both(chip, data->irq); - - jz_gpio_set_irq_bit(data, JZ_REG_GPIO_MASK_CLEAR); + irq_gc_unmask_enable_reg(data); }; /* TODO: Check if function is gpio */ @@ -353,18 +338,13 @@ static unsigned int jz_gpio_irq_startup(struct irq_data *data) static void jz_gpio_irq_shutdown(struct irq_data *data) { - jz_gpio_irq_mask(data); + irq_gc_mask_disable_reg(data); /* Set direction to input */ jz_gpio_set_irq_bit(data, JZ_REG_GPIO_DIRECTION_CLEAR); jz_gpio_set_irq_bit(data, JZ_REG_GPIO_SELECT_CLEAR); } -static void jz_gpio_irq_ack(struct irq_data *data) -{ - jz_gpio_set_irq_bit(data, JZ_REG_GPIO_FLAG_CLEAR); -}; - static int jz_gpio_irq_set_type(struct irq_data *data, unsigned int flow_type) { struct jz_gpio_chip *chip = irq_to_jz_gpio_chip(data); @@ -408,35 +388,13 @@ static int jz_gpio_irq_set_type(struct irq_data *data, unsigned int flow_type) static int jz_gpio_irq_set_wake(struct irq_data *data, unsigned int on) { struct jz_gpio_chip *chip = irq_to_jz_gpio_chip(data); - spin_lock(&chip->lock); - if (on) - chip->wakeup |= IRQ_TO_BIT(data->irq); - else - chip->wakeup &= ~IRQ_TO_BIT(data->irq); - spin_unlock(&chip->lock); + irq_gc_set_wake(data, on); irq_set_irq_wake(chip->irq, on); + return 0; } -static struct irq_chip jz_gpio_irq_chip = { - .name = "GPIO", - .irq_mask = jz_gpio_irq_mask, - .irq_unmask = jz_gpio_irq_unmask, - .irq_ack = jz_gpio_irq_ack, - .irq_startup = jz_gpio_irq_startup, - .irq_shutdown = jz_gpio_irq_shutdown, - .irq_set_type = jz_gpio_irq_set_type, - .irq_set_wake = jz_gpio_irq_set_wake, - .flags = IRQCHIP_SET_TYPE_MASKED, -}; - -/* - * This lock class tells lockdep that GPIO irqs are in a different - * category than their parents, so it won't report false recursion. - */ -static struct lock_class_key gpio_lock_class; - #define JZ4740_GPIO_CHIP(_bank) { \ .irq_base = JZ4740_IRQ_GPIO_BASE_ ## _bank, \ .gpio_chip = { \ @@ -458,64 +416,44 @@ static struct jz_gpio_chip jz4740_gpio_chips[] = { JZ4740_GPIO_CHIP(D), }; -static void jz4740_gpio_suspend_chip(struct jz_gpio_chip *chip) -{ - chip->suspend_mask = readl(chip->base + JZ_REG_GPIO_MASK); - writel(~(chip->wakeup), chip->base + JZ_REG_GPIO_MASK_SET); - writel(chip->wakeup, chip->base + JZ_REG_GPIO_MASK_CLEAR); -} - -static int jz4740_gpio_suspend(void) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(jz4740_gpio_chips); i++) - jz4740_gpio_suspend_chip(&jz4740_gpio_chips[i]); - - return 0; -} - -static void jz4740_gpio_resume_chip(struct jz_gpio_chip *chip) +static void jz4740_gpio_chip_init(struct jz_gpio_chip *chip, unsigned int id) { - uint32_t mask = chip->suspend_mask; + struct irq_chip_generic *gc; + struct irq_chip_type *ct; - writel(~mask, chip->base + JZ_REG_GPIO_MASK_CLEAR); - writel(mask, chip->base + JZ_REG_GPIO_MASK_SET); -} + chip->base = ioremap(JZ4740_GPIO_BASE_ADDR + (id * 0x100), 0x100); -static void jz4740_gpio_resume(void) -{ - int i; + chip->irq = JZ4740_IRQ_INTC_GPIO(id); + irq_set_handler_data(chip->irq, chip); + irq_set_chained_handler(chip->irq, jz_gpio_irq_demux_handler); - for (i = ARRAY_SIZE(jz4740_gpio_chips) - 1; i >= 0 ; i--) - jz4740_gpio_resume_chip(&jz4740_gpio_chips[i]); -} + gc = irq_alloc_generic_chip(chip->gpio_chip.label, 1, chip->irq_base, + chip->base, handle_level_irq); -static struct syscore_ops jz4740_gpio_syscore_ops = { - .suspend = jz4740_gpio_suspend, - .resume = jz4740_gpio_resume, -}; + gc->wake_enabled = IRQ_MSK(chip->gpio_chip.ngpio); + gc->private = chip; -static void jz4740_gpio_chip_init(struct jz_gpio_chip *chip, unsigned int id) -{ - int irq; + ct = gc->chip_types; + ct->regs.enable = JZ_REG_GPIO_MASK_CLEAR; + ct->regs.disable = JZ_REG_GPIO_MASK_SET; + ct->regs.ack = JZ_REG_GPIO_FLAG_CLEAR; - spin_lock_init(&chip->lock); + ct->chip.name = "GPIO"; + ct->chip.irq_mask = irq_gc_mask_disable_reg; + ct->chip.irq_unmask = jz_gpio_irq_unmask; + ct->chip.irq_ack = irq_gc_ack_set_bit; + ct->chip.irq_suspend = jz4740_irq_suspend; + ct->chip.irq_resume = jz4740_irq_resume; + ct->chip.irq_startup = jz_gpio_irq_startup; + ct->chip.irq_shutdown = jz_gpio_irq_shutdown; + ct->chip.irq_set_type = jz_gpio_irq_set_type; + ct->chip.irq_set_wake = jz_gpio_irq_set_wake; + ct->chip.flags = IRQCHIP_SET_TYPE_MASKED; - chip->base = ioremap(JZ4740_GPIO_BASE_ADDR + (id * 0x100), 0x100); + irq_setup_generic_chip(gc, IRQ_MSK(chip->gpio_chip.ngpio), + IRQ_GC_INIT_NESTED_LOCK, 0, IRQ_NOPROBE | IRQ_LEVEL); gpiochip_add(&chip->gpio_chip); - - chip->irq = JZ4740_IRQ_INTC_GPIO(id); - irq_set_handler_data(chip->irq, chip); - irq_set_chained_handler(chip->irq, jz_gpio_irq_demux_handler); - - for (irq = chip->irq_base; irq < chip->irq_base + chip->gpio_chip.ngpio; ++irq) { - irq_set_lockdep_class(irq, &gpio_lock_class); - irq_set_chip_data(irq, chip); - irq_set_chip_and_handler(irq, &jz_gpio_irq_chip, - handle_level_irq); - } } static int __init jz4740_gpio_init(void) @@ -525,8 +463,6 @@ static int __init jz4740_gpio_init(void) for (i = 0; i < ARRAY_SIZE(jz4740_gpio_chips); ++i) jz4740_gpio_chip_init(&jz4740_gpio_chips[i], i); - register_syscore_ops(&jz4740_gpio_syscore_ops); - printk(KERN_INFO "JZ4740 GPIO initialized\n"); return 0; diff --git a/arch/mips/jz4740/irq.c b/arch/mips/jz4740/irq.c index d82c0c430e0..fc57ded326d 100644 --- a/arch/mips/jz4740/irq.c +++ b/arch/mips/jz4740/irq.c @@ -32,8 +32,6 @@ #include <asm/mach-jz4740/base.h> static void __iomem *jz_intc_base; -static uint32_t jz_intc_wakeup; -static uint32_t jz_intc_saved; #define JZ_REG_INTC_STATUS 0x00 #define JZ_REG_INTC_MASK 0x04 @@ -41,51 +39,36 @@ static uint32_t jz_intc_saved; #define JZ_REG_INTC_CLEAR_MASK 0x0c #define JZ_REG_INTC_PENDING 0x10 -#define IRQ_BIT(x) BIT((x) - JZ4740_IRQ_BASE) - -static inline unsigned long intc_irq_bit(struct irq_data *data) +static irqreturn_t jz4740_cascade(int irq, void *data) { - return (unsigned long)irq_data_get_irq_chip_data(data); -} + uint32_t irq_reg; -static void intc_irq_unmask(struct irq_data *data) -{ - writel(intc_irq_bit(data), jz_intc_base + JZ_REG_INTC_CLEAR_MASK); -} + irq_reg = readl(jz_intc_base + JZ_REG_INTC_PENDING); -static void intc_irq_mask(struct irq_data *data) -{ - writel(intc_irq_bit(data), jz_intc_base + JZ_REG_INTC_SET_MASK); + if (irq_reg) + generic_handle_irq(__fls(irq_reg) + JZ4740_IRQ_BASE); + + return IRQ_HANDLED; } -static int intc_irq_set_wake(struct irq_data *data, unsigned int on) +static void jz4740_irq_set_mask(struct irq_chip_generic *gc, uint32_t mask) { - if (on) - jz_intc_wakeup |= intc_irq_bit(data); - else - jz_intc_wakeup &= ~intc_irq_bit(data); + struct irq_chip_regs *regs = &gc->chip_types->regs; - return 0; + writel(mask, gc->reg_base + regs->enable); + writel(~mask, gc->reg_base + regs->disable); } -static struct irq_chip intc_irq_type = { - .name = "INTC", - .irq_mask = intc_irq_mask, - .irq_mask_ack = intc_irq_mask, - .irq_unmask = intc_irq_unmask, - .irq_set_wake = intc_irq_set_wake, -}; - -static irqreturn_t jz4740_cascade(int irq, void *data) +void jz4740_irq_suspend(struct irq_data *data) { - uint32_t irq_reg; - - irq_reg = readl(jz_intc_base + JZ_REG_INTC_PENDING); - - if (irq_reg) - generic_handle_irq(__fls(irq_reg) + JZ4740_IRQ_BASE); + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(data); + jz4740_irq_set_mask(gc, gc->wake_active); +} - return IRQ_HANDLED; +void jz4740_irq_resume(struct irq_data *data) +{ + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(data); + jz4740_irq_set_mask(gc, gc->mask_cache); } static struct irqaction jz4740_cascade_action = { @@ -95,7 +78,9 @@ static struct irqaction jz4740_cascade_action = { void __init arch_init_irq(void) { - int i; + struct irq_chip_generic *gc; + struct irq_chip_type *ct; + mips_cpu_irq_init(); jz_intc_base = ioremap(JZ4740_INTC_BASE_ADDR, 0x14); @@ -103,10 +88,22 @@ void __init arch_init_irq(void) /* Mask all irqs */ writel(0xffffffff, jz_intc_base + JZ_REG_INTC_SET_MASK); - for (i = JZ4740_IRQ_BASE; i < JZ4740_IRQ_BASE + 32; i++) { - irq_set_chip_data(i, (void *)IRQ_BIT(i)); - irq_set_chip_and_handler(i, &intc_irq_type, handle_level_irq); - } + gc = irq_alloc_generic_chip("INTC", 1, JZ4740_IRQ_BASE, jz_intc_base, + handle_level_irq); + + gc->wake_enabled = IRQ_MSK(32); + + ct = gc->chip_types; + ct->regs.enable = JZ_REG_INTC_CLEAR_MASK; + ct->regs.disable = JZ_REG_INTC_SET_MASK; + ct->chip.irq_unmask = irq_gc_unmask_enable_reg; + ct->chip.irq_mask = irq_gc_mask_disable_reg; + ct->chip.irq_mask_ack = irq_gc_mask_disable_reg; + ct->chip.irq_set_wake = irq_gc_set_wake; + ct->chip.irq_suspend = jz4740_irq_suspend; + ct->chip.irq_resume = jz4740_irq_resume; + + irq_setup_generic_chip(gc, IRQ_MSK(32), 0, 0, IRQ_NOPROBE | IRQ_LEVEL); setup_irq(2, &jz4740_cascade_action); } @@ -122,19 +119,6 @@ asmlinkage void plat_irq_dispatch(void) spurious_interrupt(); } -void jz4740_intc_suspend(void) -{ - jz_intc_saved = readl(jz_intc_base + JZ_REG_INTC_MASK); - writel(~jz_intc_wakeup, jz_intc_base + JZ_REG_INTC_SET_MASK); - writel(jz_intc_wakeup, jz_intc_base + JZ_REG_INTC_CLEAR_MASK); -} - -void jz4740_intc_resume(void) -{ - writel(~jz_intc_saved, jz_intc_base + JZ_REG_INTC_CLEAR_MASK); - writel(jz_intc_saved, jz_intc_base + JZ_REG_INTC_SET_MASK); -} - #ifdef CONFIG_DEBUG_FS static inline void intc_seq_reg(struct seq_file *s, const char *name, diff --git a/arch/mips/jz4740/irq.h b/arch/mips/jz4740/irq.h index 56b5eadd1fa..f75e39d6288 100644 --- a/arch/mips/jz4740/irq.h +++ b/arch/mips/jz4740/irq.h @@ -15,7 +15,9 @@ #ifndef __MIPS_JZ4740_IRQ_H__ #define __MIPS_JZ4740_IRQ_H__ -extern void jz4740_intc_suspend(void); -extern void jz4740_intc_resume(void); +#include <linux/irq.h> + +extern void jz4740_irq_suspend(struct irq_data *data); +extern void jz4740_irq_resume(struct irq_data *data); #endif diff --git a/arch/mips/jz4740/pm.c b/arch/mips/jz4740/pm.c index 902d5b50124..6744fa723f7 100644 --- a/arch/mips/jz4740/pm.c +++ b/arch/mips/jz4740/pm.c @@ -21,11 +21,9 @@ #include <asm/mach-jz4740/clock.h> #include "clock.h" -#include "irq.h" static int jz4740_pm_enter(suspend_state_t state) { - jz4740_intc_suspend(); jz4740_clock_suspend(); jz4740_clock_set_wait_mode(JZ4740_WAIT_MODE_SLEEP); @@ -37,7 +35,6 @@ static int jz4740_pm_enter(suspend_state_t state) jz4740_clock_set_wait_mode(JZ4740_WAIT_MODE_IDLE); jz4740_clock_resume(); - jz4740_intc_resume(); return 0; } diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index 83bba332bbf..1a966183e35 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -11,6 +11,8 @@ obj-y += cpu-probe.o branch.o entry.o genex.o irq.o process.o \ ifdef CONFIG_FUNCTION_TRACER CFLAGS_REMOVE_ftrace.o = -pg CFLAGS_REMOVE_early_printk.o = -pg +CFLAGS_REMOVE_perf_event.o = -pg +CFLAGS_REMOVE_perf_event_mipsxx.o = -pg endif obj-$(CONFIG_CEVT_BCM1480) += cevt-bcm1480.o @@ -106,7 +108,8 @@ obj-$(CONFIG_HAVE_STD_PC_SERIAL_PORT) += 8250-platform.o obj-$(CONFIG_MIPS_CPUFREQ) += cpufreq/ -obj-$(CONFIG_HW_PERF_EVENTS) += perf_event.o +obj-$(CONFIG_PERF_EVENTS) += perf_event.o +obj-$(CONFIG_HW_PERF_EVENTS) += perf_event_mipsxx.o obj-$(CONFIG_JUMP_LABEL) += jump_label.o diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index ebc0cd20b35..aa327a75598 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -978,7 +978,10 @@ static inline void cpu_probe_cavium(struct cpuinfo_mips *c, unsigned int cpu) platform: set_elf_platform(cpu, "octeon"); break; + case PRID_IMP_CAVIUM_CN61XX: case PRID_IMP_CAVIUM_CN63XX: + case PRID_IMP_CAVIUM_CN66XX: + case PRID_IMP_CAVIUM_CN68XX: c->cputype = CPU_CAVIUM_OCTEON2; __cpu_name[cpu] = "Cavium Octeon II"; set_elf_platform(cpu, "octeon2"); diff --git a/arch/mips/kernel/perf_event.c b/arch/mips/kernel/perf_event.c index 0aee944ac38..c1cf9c6c3f7 100644 --- a/arch/mips/kernel/perf_event.c +++ b/arch/mips/kernel/perf_event.c @@ -14,533 +14,16 @@ * published by the Free Software Foundation. */ -#include <linux/cpumask.h> -#include <linux/interrupt.h> -#include <linux/smp.h> -#include <linux/kernel.h> #include <linux/perf_event.h> -#include <linux/uaccess.h> -#include <asm/irq.h> -#include <asm/irq_regs.h> #include <asm/stacktrace.h> -#include <asm/time.h> /* For perf_irq */ - -/* These are for 32bit counters. For 64bit ones, define them accordingly. */ -#define MAX_PERIOD ((1ULL << 32) - 1) -#define VALID_COUNT 0x7fffffff -#define TOTAL_BITS 32 -#define HIGHEST_BIT 31 - -#define MIPS_MAX_HWEVENTS 4 - -struct cpu_hw_events { - /* Array of events on this cpu. */ - struct perf_event *events[MIPS_MAX_HWEVENTS]; - - /* - * Set the bit (indexed by the counter number) when the counter - * is used for an event. - */ - unsigned long used_mask[BITS_TO_LONGS(MIPS_MAX_HWEVENTS)]; - - /* - * The borrowed MSB for the performance counter. A MIPS performance - * counter uses its bit 31 (for 32bit counters) or bit 63 (for 64bit - * counters) as a factor of determining whether a counter overflow - * should be signaled. So here we use a separate MSB for each - * counter to make things easy. - */ - unsigned long msbs[BITS_TO_LONGS(MIPS_MAX_HWEVENTS)]; - - /* - * Software copy of the control register for each performance counter. - * MIPS CPUs vary in performance counters. They use this differently, - * and even may not use it. - */ - unsigned int saved_ctrl[MIPS_MAX_HWEVENTS]; -}; -DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events) = { - .saved_ctrl = {0}, -}; - -/* The description of MIPS performance events. */ -struct mips_perf_event { - unsigned int event_id; - /* - * MIPS performance counters are indexed starting from 0. - * CNTR_EVEN indicates the indexes of the counters to be used are - * even numbers. - */ - unsigned int cntr_mask; - #define CNTR_EVEN 0x55555555 - #define CNTR_ODD 0xaaaaaaaa -#ifdef CONFIG_MIPS_MT_SMP - enum { - T = 0, - V = 1, - P = 2, - } range; -#else - #define T - #define V - #define P -#endif -}; - -static struct mips_perf_event raw_event; -static DEFINE_MUTEX(raw_event_mutex); - -#define UNSUPPORTED_PERF_EVENT_ID 0xffffffff -#define C(x) PERF_COUNT_HW_CACHE_##x - -struct mips_pmu { - const char *name; - int irq; - irqreturn_t (*handle_irq)(int irq, void *dev); - int (*handle_shared_irq)(void); - void (*start)(void); - void (*stop)(void); - int (*alloc_counter)(struct cpu_hw_events *cpuc, - struct hw_perf_event *hwc); - u64 (*read_counter)(unsigned int idx); - void (*write_counter)(unsigned int idx, u64 val); - void (*enable_event)(struct hw_perf_event *evt, int idx); - void (*disable_event)(int idx); - const struct mips_perf_event *(*map_raw_event)(u64 config); - const struct mips_perf_event (*general_event_map)[PERF_COUNT_HW_MAX]; - const struct mips_perf_event (*cache_event_map) - [PERF_COUNT_HW_CACHE_MAX] - [PERF_COUNT_HW_CACHE_OP_MAX] - [PERF_COUNT_HW_CACHE_RESULT_MAX]; - unsigned int num_counters; -}; - -static const struct mips_pmu *mipspmu; - -static int -mipspmu_event_set_period(struct perf_event *event, - struct hw_perf_event *hwc, - int idx) -{ - struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); - s64 left = local64_read(&hwc->period_left); - s64 period = hwc->sample_period; - int ret = 0; - u64 uleft; - unsigned long flags; - - if (unlikely(left <= -period)) { - left = period; - local64_set(&hwc->period_left, left); - hwc->last_period = period; - ret = 1; - } - - if (unlikely(left <= 0)) { - left += period; - local64_set(&hwc->period_left, left); - hwc->last_period = period; - ret = 1; - } - - if (left > (s64)MAX_PERIOD) - left = MAX_PERIOD; - - local64_set(&hwc->prev_count, (u64)-left); - - local_irq_save(flags); - uleft = (u64)(-left) & MAX_PERIOD; - uleft > VALID_COUNT ? - set_bit(idx, cpuc->msbs) : clear_bit(idx, cpuc->msbs); - mipspmu->write_counter(idx, (u64)(-left) & VALID_COUNT); - local_irq_restore(flags); - - perf_event_update_userpage(event); - - return ret; -} - -static void mipspmu_event_update(struct perf_event *event, - struct hw_perf_event *hwc, - int idx) -{ - struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); - unsigned long flags; - int shift = 64 - TOTAL_BITS; - s64 prev_raw_count, new_raw_count; - u64 delta; - -again: - prev_raw_count = local64_read(&hwc->prev_count); - local_irq_save(flags); - /* Make the counter value be a "real" one. */ - new_raw_count = mipspmu->read_counter(idx); - if (new_raw_count & (test_bit(idx, cpuc->msbs) << HIGHEST_BIT)) { - new_raw_count &= VALID_COUNT; - clear_bit(idx, cpuc->msbs); - } else - new_raw_count |= (test_bit(idx, cpuc->msbs) << HIGHEST_BIT); - local_irq_restore(flags); - - if (local64_cmpxchg(&hwc->prev_count, prev_raw_count, - new_raw_count) != prev_raw_count) - goto again; - - delta = (new_raw_count << shift) - (prev_raw_count << shift); - delta >>= shift; - - local64_add(delta, &event->count); - local64_sub(delta, &hwc->period_left); -} - -static void mipspmu_start(struct perf_event *event, int flags) -{ - struct hw_perf_event *hwc = &event->hw; - - if (!mipspmu) - return; - - if (flags & PERF_EF_RELOAD) - WARN_ON_ONCE(!(hwc->state & PERF_HES_UPTODATE)); - - hwc->state = 0; - - /* Set the period for the event. */ - mipspmu_event_set_period(event, hwc, hwc->idx); - - /* Enable the event. */ - mipspmu->enable_event(hwc, hwc->idx); -} - -static void mipspmu_stop(struct perf_event *event, int flags) -{ - struct hw_perf_event *hwc = &event->hw; - - if (!mipspmu) - return; - - if (!(hwc->state & PERF_HES_STOPPED)) { - /* We are working on a local event. */ - mipspmu->disable_event(hwc->idx); - barrier(); - mipspmu_event_update(event, hwc, hwc->idx); - hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE; - } -} - -static int mipspmu_add(struct perf_event *event, int flags) -{ - struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); - struct hw_perf_event *hwc = &event->hw; - int idx; - int err = 0; - - perf_pmu_disable(event->pmu); - - /* To look for a free counter for this event. */ - idx = mipspmu->alloc_counter(cpuc, hwc); - if (idx < 0) { - err = idx; - goto out; - } - - /* - * If there is an event in the counter we are going to use then - * make sure it is disabled. - */ - event->hw.idx = idx; - mipspmu->disable_event(idx); - cpuc->events[idx] = event; - - hwc->state = PERF_HES_STOPPED | PERF_HES_UPTODATE; - if (flags & PERF_EF_START) - mipspmu_start(event, PERF_EF_RELOAD); - - /* Propagate our changes to the userspace mapping. */ - perf_event_update_userpage(event); - -out: - perf_pmu_enable(event->pmu); - return err; -} - -static void mipspmu_del(struct perf_event *event, int flags) -{ - struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); - struct hw_perf_event *hwc = &event->hw; - int idx = hwc->idx; - - WARN_ON(idx < 0 || idx >= mipspmu->num_counters); - - mipspmu_stop(event, PERF_EF_UPDATE); - cpuc->events[idx] = NULL; - clear_bit(idx, cpuc->used_mask); - - perf_event_update_userpage(event); -} - -static void mipspmu_read(struct perf_event *event) -{ - struct hw_perf_event *hwc = &event->hw; - - /* Don't read disabled counters! */ - if (hwc->idx < 0) - return; - - mipspmu_event_update(event, hwc, hwc->idx); -} - -static void mipspmu_enable(struct pmu *pmu) -{ - if (mipspmu) - mipspmu->start(); -} - -static void mipspmu_disable(struct pmu *pmu) -{ - if (mipspmu) - mipspmu->stop(); -} - -static atomic_t active_events = ATOMIC_INIT(0); -static DEFINE_MUTEX(pmu_reserve_mutex); -static int (*save_perf_irq)(void); - -static int mipspmu_get_irq(void) -{ - int err; - - if (mipspmu->irq >= 0) { - /* Request my own irq handler. */ - err = request_irq(mipspmu->irq, mipspmu->handle_irq, - IRQF_DISABLED | IRQF_NOBALANCING, - "mips_perf_pmu", NULL); - if (err) { - pr_warning("Unable to request IRQ%d for MIPS " - "performance counters!\n", mipspmu->irq); - } - } else if (cp0_perfcount_irq < 0) { - /* - * We are sharing the irq number with the timer interrupt. - */ - save_perf_irq = perf_irq; - perf_irq = mipspmu->handle_shared_irq; - err = 0; - } else { - pr_warning("The platform hasn't properly defined its " - "interrupt controller.\n"); - err = -ENOENT; - } - - return err; -} - -static void mipspmu_free_irq(void) -{ - if (mipspmu->irq >= 0) - free_irq(mipspmu->irq, NULL); - else if (cp0_perfcount_irq < 0) - perf_irq = save_perf_irq; -} - -/* - * mipsxx/rm9000/loongson2 have different performance counters, they have - * specific low-level init routines. - */ -static void reset_counters(void *arg); -static int __hw_perf_event_init(struct perf_event *event); - -static void hw_perf_event_destroy(struct perf_event *event) -{ - if (atomic_dec_and_mutex_lock(&active_events, - &pmu_reserve_mutex)) { - /* - * We must not call the destroy function with interrupts - * disabled. - */ - on_each_cpu(reset_counters, - (void *)(long)mipspmu->num_counters, 1); - mipspmu_free_irq(); - mutex_unlock(&pmu_reserve_mutex); - } -} - -static int mipspmu_event_init(struct perf_event *event) -{ - int err = 0; - - switch (event->attr.type) { - case PERF_TYPE_RAW: - case PERF_TYPE_HARDWARE: - case PERF_TYPE_HW_CACHE: - break; - - default: - return -ENOENT; - } - - if (!mipspmu || event->cpu >= nr_cpumask_bits || - (event->cpu >= 0 && !cpu_online(event->cpu))) - return -ENODEV; - - if (!atomic_inc_not_zero(&active_events)) { - if (atomic_read(&active_events) > MIPS_MAX_HWEVENTS) { - atomic_dec(&active_events); - return -ENOSPC; - } - - mutex_lock(&pmu_reserve_mutex); - if (atomic_read(&active_events) == 0) - err = mipspmu_get_irq(); - - if (!err) - atomic_inc(&active_events); - mutex_unlock(&pmu_reserve_mutex); - } - - if (err) - return err; - - err = __hw_perf_event_init(event); - if (err) - hw_perf_event_destroy(event); - - return err; -} - -static struct pmu pmu = { - .pmu_enable = mipspmu_enable, - .pmu_disable = mipspmu_disable, - .event_init = mipspmu_event_init, - .add = mipspmu_add, - .del = mipspmu_del, - .start = mipspmu_start, - .stop = mipspmu_stop, - .read = mipspmu_read, -}; - -static inline unsigned int -mipspmu_perf_event_encode(const struct mips_perf_event *pev) -{ -/* - * Top 8 bits for range, next 16 bits for cntr_mask, lowest 8 bits for - * event_id. - */ -#ifdef CONFIG_MIPS_MT_SMP - return ((unsigned int)pev->range << 24) | - (pev->cntr_mask & 0xffff00) | - (pev->event_id & 0xff); -#else - return (pev->cntr_mask & 0xffff00) | - (pev->event_id & 0xff); -#endif -} - -static const struct mips_perf_event * -mipspmu_map_general_event(int idx) -{ - const struct mips_perf_event *pev; - - pev = ((*mipspmu->general_event_map)[idx].event_id == - UNSUPPORTED_PERF_EVENT_ID ? ERR_PTR(-EOPNOTSUPP) : - &(*mipspmu->general_event_map)[idx]); - - return pev; -} - -static const struct mips_perf_event * -mipspmu_map_cache_event(u64 config) -{ - unsigned int cache_type, cache_op, cache_result; - const struct mips_perf_event *pev; - - cache_type = (config >> 0) & 0xff; - if (cache_type >= PERF_COUNT_HW_CACHE_MAX) - return ERR_PTR(-EINVAL); - - cache_op = (config >> 8) & 0xff; - if (cache_op >= PERF_COUNT_HW_CACHE_OP_MAX) - return ERR_PTR(-EINVAL); - - cache_result = (config >> 16) & 0xff; - if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX) - return ERR_PTR(-EINVAL); - - pev = &((*mipspmu->cache_event_map) - [cache_type] - [cache_op] - [cache_result]); - - if (pev->event_id == UNSUPPORTED_PERF_EVENT_ID) - return ERR_PTR(-EOPNOTSUPP); - - return pev; - -} - -static int validate_event(struct cpu_hw_events *cpuc, - struct perf_event *event) -{ - struct hw_perf_event fake_hwc = event->hw; - - /* Allow mixed event group. So return 1 to pass validation. */ - if (event->pmu != &pmu || event->state <= PERF_EVENT_STATE_OFF) - return 1; - - return mipspmu->alloc_counter(cpuc, &fake_hwc) >= 0; -} - -static int validate_group(struct perf_event *event) -{ - struct perf_event *sibling, *leader = event->group_leader; - struct cpu_hw_events fake_cpuc; - - memset(&fake_cpuc, 0, sizeof(fake_cpuc)); - - if (!validate_event(&fake_cpuc, leader)) - return -ENOSPC; - - list_for_each_entry(sibling, &leader->sibling_list, group_entry) { - if (!validate_event(&fake_cpuc, sibling)) - return -ENOSPC; - } - - if (!validate_event(&fake_cpuc, event)) - return -ENOSPC; - - return 0; -} - -/* This is needed by specific irq handlers in perf_event_*.c */ -static void -handle_associated_event(struct cpu_hw_events *cpuc, - int idx, struct perf_sample_data *data, struct pt_regs *regs) -{ - struct perf_event *event = cpuc->events[idx]; - struct hw_perf_event *hwc = &event->hw; - - mipspmu_event_update(event, hwc, idx); - data->period = event->hw.last_period; - if (!mipspmu_event_set_period(event, hwc, idx)) - return; - - if (perf_event_overflow(event, data, regs)) - mipspmu->disable_event(idx); -} - -#include "perf_event_mipsxx.c" /* Callchain handling code. */ /* * Leave userspace callchain empty for now. When we find a way to trace - * the user stack callchains, we add here. + * the user stack callchains, we will add it here. */ -void perf_callchain_user(struct perf_callchain_entry *entry, - struct pt_regs *regs) -{ -} static void save_raw_perf_callchain(struct perf_callchain_entry *entry, unsigned long reg29) diff --git a/arch/mips/kernel/perf_event_mipsxx.c b/arch/mips/kernel/perf_event_mipsxx.c index e5ad09a9baf..4f2971bcf8e 100644 --- a/arch/mips/kernel/perf_event_mipsxx.c +++ b/arch/mips/kernel/perf_event_mipsxx.c @@ -1,13 +1,112 @@ -#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64) || \ - defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_SB1) +/* + * Linux performance counter support for MIPS. + * + * Copyright (C) 2010 MIPS Technologies, Inc. + * Copyright (C) 2011 Cavium Networks, Inc. + * Author: Deng-Cheng Zhu + * + * This code is based on the implementation for ARM, which is in turn + * based on the sparc64 perf event code and the x86 code. Performance + * counter access is based on the MIPS Oprofile code. And the callchain + * support references the code of MIPS stacktrace.c. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/cpumask.h> +#include <linux/interrupt.h> +#include <linux/smp.h> +#include <linux/kernel.h> +#include <linux/perf_event.h> +#include <linux/uaccess.h> + +#include <asm/irq.h> +#include <asm/irq_regs.h> +#include <asm/stacktrace.h> +#include <asm/time.h> /* For perf_irq */ + +#define MIPS_MAX_HWEVENTS 4 + +struct cpu_hw_events { + /* Array of events on this cpu. */ + struct perf_event *events[MIPS_MAX_HWEVENTS]; + + /* + * Set the bit (indexed by the counter number) when the counter + * is used for an event. + */ + unsigned long used_mask[BITS_TO_LONGS(MIPS_MAX_HWEVENTS)]; + + /* + * Software copy of the control register for each performance counter. + * MIPS CPUs vary in performance counters. They use this differently, + * and even may not use it. + */ + unsigned int saved_ctrl[MIPS_MAX_HWEVENTS]; +}; +DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events) = { + .saved_ctrl = {0}, +}; + +/* The description of MIPS performance events. */ +struct mips_perf_event { + unsigned int event_id; + /* + * MIPS performance counters are indexed starting from 0. + * CNTR_EVEN indicates the indexes of the counters to be used are + * even numbers. + */ + unsigned int cntr_mask; + #define CNTR_EVEN 0x55555555 + #define CNTR_ODD 0xaaaaaaaa + #define CNTR_ALL 0xffffffff +#ifdef CONFIG_MIPS_MT_SMP + enum { + T = 0, + V = 1, + P = 2, + } range; +#else + #define T + #define V + #define P +#endif +}; + +static struct mips_perf_event raw_event; +static DEFINE_MUTEX(raw_event_mutex); + +#define UNSUPPORTED_PERF_EVENT_ID 0xffffffff +#define C(x) PERF_COUNT_HW_CACHE_##x + +struct mips_pmu { + u64 max_period; + u64 valid_count; + u64 overflow; + const char *name; + int irq; + u64 (*read_counter)(unsigned int idx); + void (*write_counter)(unsigned int idx, u64 val); + const struct mips_perf_event *(*map_raw_event)(u64 config); + const struct mips_perf_event (*general_event_map)[PERF_COUNT_HW_MAX]; + const struct mips_perf_event (*cache_event_map) + [PERF_COUNT_HW_CACHE_MAX] + [PERF_COUNT_HW_CACHE_OP_MAX] + [PERF_COUNT_HW_CACHE_RESULT_MAX]; + unsigned int num_counters; +}; + +static struct mips_pmu mipspmu; #define M_CONFIG1_PC (1 << 4) -#define M_PERFCTL_EXL (1UL << 0) -#define M_PERFCTL_KERNEL (1UL << 1) -#define M_PERFCTL_SUPERVISOR (1UL << 2) -#define M_PERFCTL_USER (1UL << 3) -#define M_PERFCTL_INTERRUPT_ENABLE (1UL << 4) +#define M_PERFCTL_EXL (1 << 0) +#define M_PERFCTL_KERNEL (1 << 1) +#define M_PERFCTL_SUPERVISOR (1 << 2) +#define M_PERFCTL_USER (1 << 3) +#define M_PERFCTL_INTERRUPT_ENABLE (1 << 4) #define M_PERFCTL_EVENT(event) (((event) & 0x3ff) << 5) #define M_PERFCTL_VPEID(vpe) ((vpe) << 16) #define M_PERFCTL_MT_EN(filter) ((filter) << 20) @@ -15,8 +114,8 @@ #define M_TC_EN_VPE M_PERFCTL_MT_EN(1) #define M_TC_EN_TC M_PERFCTL_MT_EN(2) #define M_PERFCTL_TCID(tcid) ((tcid) << 22) -#define M_PERFCTL_WIDE (1UL << 30) -#define M_PERFCTL_MORE (1UL << 31) +#define M_PERFCTL_WIDE (1 << 30) +#define M_PERFCTL_MORE (1 << 31) #define M_PERFCTL_COUNT_EVENT_WHENEVER (M_PERFCTL_EXL | \ M_PERFCTL_KERNEL | \ @@ -31,11 +130,12 @@ #endif #define M_PERFCTL_EVENT_MASK 0xfe0 -#define M_COUNTER_OVERFLOW (1UL << 31) #ifdef CONFIG_MIPS_MT_SMP static int cpu_has_mipsmt_pertccounters; +static DEFINE_RWLOCK(pmuint_rwlock); + /* * FIXME: For VSMP, vpe_id() is redefined for Perf-events, because * cpu_data[cpuid].vpe_id reports 0 for _both_ CPUs. @@ -49,209 +149,673 @@ static int cpu_has_mipsmt_pertccounters; #endif /* Copied from op_model_mipsxx.c */ -static inline unsigned int vpe_shift(void) +static unsigned int vpe_shift(void) { if (num_possible_cpus() > 1) return 1; return 0; } -#else /* !CONFIG_MIPS_MT_SMP */ -#define vpe_id() 0 -static inline unsigned int vpe_shift(void) -{ - return 0; -} -#endif /* CONFIG_MIPS_MT_SMP */ - -static inline unsigned int -counters_total_to_per_cpu(unsigned int counters) +static unsigned int counters_total_to_per_cpu(unsigned int counters) { return counters >> vpe_shift(); } -static inline unsigned int -counters_per_cpu_to_total(unsigned int counters) +static unsigned int counters_per_cpu_to_total(unsigned int counters) { return counters << vpe_shift(); } -#define __define_perf_accessors(r, n, np) \ - \ -static inline unsigned int r_c0_ ## r ## n(void) \ -{ \ - unsigned int cpu = vpe_id(); \ - \ - switch (cpu) { \ - case 0: \ - return read_c0_ ## r ## n(); \ - case 1: \ - return read_c0_ ## r ## np(); \ - default: \ - BUG(); \ - } \ - return 0; \ -} \ - \ -static inline void w_c0_ ## r ## n(unsigned int value) \ -{ \ - unsigned int cpu = vpe_id(); \ - \ - switch (cpu) { \ - case 0: \ - write_c0_ ## r ## n(value); \ - return; \ - case 1: \ - write_c0_ ## r ## np(value); \ - return; \ - default: \ - BUG(); \ - } \ - return; \ -} \ - -__define_perf_accessors(perfcntr, 0, 2) -__define_perf_accessors(perfcntr, 1, 3) -__define_perf_accessors(perfcntr, 2, 0) -__define_perf_accessors(perfcntr, 3, 1) - -__define_perf_accessors(perfctrl, 0, 2) -__define_perf_accessors(perfctrl, 1, 3) -__define_perf_accessors(perfctrl, 2, 0) -__define_perf_accessors(perfctrl, 3, 1) - -static inline int __n_counters(void) -{ - if (!(read_c0_config1() & M_CONFIG1_PC)) - return 0; - if (!(read_c0_perfctrl0() & M_PERFCTL_MORE)) - return 1; - if (!(read_c0_perfctrl1() & M_PERFCTL_MORE)) - return 2; - if (!(read_c0_perfctrl2() & M_PERFCTL_MORE)) - return 3; +#else /* !CONFIG_MIPS_MT_SMP */ +#define vpe_id() 0 - return 4; -} +#endif /* CONFIG_MIPS_MT_SMP */ -static inline int n_counters(void) -{ - int counters; +static void resume_local_counters(void); +static void pause_local_counters(void); +static irqreturn_t mipsxx_pmu_handle_irq(int, void *); +static int mipsxx_pmu_handle_shared_irq(void); - switch (current_cpu_type()) { - case CPU_R10000: - counters = 2; - break; +static unsigned int mipsxx_pmu_swizzle_perf_idx(unsigned int idx) +{ + if (vpe_id() == 1) + idx = (idx + 2) & 3; + return idx; +} - case CPU_R12000: - case CPU_R14000: - counters = 4; - break; +static u64 mipsxx_pmu_read_counter(unsigned int idx) +{ + idx = mipsxx_pmu_swizzle_perf_idx(idx); + switch (idx) { + case 0: + /* + * The counters are unsigned, we must cast to truncate + * off the high bits. + */ + return (u32)read_c0_perfcntr0(); + case 1: + return (u32)read_c0_perfcntr1(); + case 2: + return (u32)read_c0_perfcntr2(); + case 3: + return (u32)read_c0_perfcntr3(); default: - counters = __n_counters(); + WARN_ONCE(1, "Invalid performance counter number (%d)\n", idx); + return 0; } - - return counters; } -static void reset_counters(void *arg) +static u64 mipsxx_pmu_read_counter_64(unsigned int idx) { - int counters = (int)(long)arg; - switch (counters) { - case 4: - w_c0_perfctrl3(0); - w_c0_perfcntr3(0); - case 3: - w_c0_perfctrl2(0); - w_c0_perfcntr2(0); - case 2: - w_c0_perfctrl1(0); - w_c0_perfcntr1(0); + idx = mipsxx_pmu_swizzle_perf_idx(idx); + + switch (idx) { + case 0: + return read_c0_perfcntr0_64(); case 1: - w_c0_perfctrl0(0); - w_c0_perfcntr0(0); + return read_c0_perfcntr1_64(); + case 2: + return read_c0_perfcntr2_64(); + case 3: + return read_c0_perfcntr3_64(); + default: + WARN_ONCE(1, "Invalid performance counter number (%d)\n", idx); + return 0; } } -static inline u64 -mipsxx_pmu_read_counter(unsigned int idx) +static void mipsxx_pmu_write_counter(unsigned int idx, u64 val) { + idx = mipsxx_pmu_swizzle_perf_idx(idx); + switch (idx) { case 0: - return r_c0_perfcntr0(); + write_c0_perfcntr0(val); + return; case 1: - return r_c0_perfcntr1(); + write_c0_perfcntr1(val); + return; case 2: - return r_c0_perfcntr2(); + write_c0_perfcntr2(val); + return; case 3: - return r_c0_perfcntr3(); - default: - WARN_ONCE(1, "Invalid performance counter number (%d)\n", idx); - return 0; + write_c0_perfcntr3(val); + return; } } -static inline void -mipsxx_pmu_write_counter(unsigned int idx, u64 val) +static void mipsxx_pmu_write_counter_64(unsigned int idx, u64 val) { + idx = mipsxx_pmu_swizzle_perf_idx(idx); + switch (idx) { case 0: - w_c0_perfcntr0(val); + write_c0_perfcntr0_64(val); return; case 1: - w_c0_perfcntr1(val); + write_c0_perfcntr1_64(val); return; case 2: - w_c0_perfcntr2(val); + write_c0_perfcntr2_64(val); return; case 3: - w_c0_perfcntr3(val); + write_c0_perfcntr3_64(val); return; } } -static inline unsigned int -mipsxx_pmu_read_control(unsigned int idx) +static unsigned int mipsxx_pmu_read_control(unsigned int idx) { + idx = mipsxx_pmu_swizzle_perf_idx(idx); + switch (idx) { case 0: - return r_c0_perfctrl0(); + return read_c0_perfctrl0(); case 1: - return r_c0_perfctrl1(); + return read_c0_perfctrl1(); case 2: - return r_c0_perfctrl2(); + return read_c0_perfctrl2(); case 3: - return r_c0_perfctrl3(); + return read_c0_perfctrl3(); default: WARN_ONCE(1, "Invalid performance counter number (%d)\n", idx); return 0; } } -static inline void -mipsxx_pmu_write_control(unsigned int idx, unsigned int val) +static void mipsxx_pmu_write_control(unsigned int idx, unsigned int val) { + idx = mipsxx_pmu_swizzle_perf_idx(idx); + switch (idx) { case 0: - w_c0_perfctrl0(val); + write_c0_perfctrl0(val); return; case 1: - w_c0_perfctrl1(val); + write_c0_perfctrl1(val); return; case 2: - w_c0_perfctrl2(val); + write_c0_perfctrl2(val); return; case 3: - w_c0_perfctrl3(val); + write_c0_perfctrl3(val); + return; + } +} + +static int mipsxx_pmu_alloc_counter(struct cpu_hw_events *cpuc, + struct hw_perf_event *hwc) +{ + int i; + + /* + * We only need to care the counter mask. The range has been + * checked definitely. + */ + unsigned long cntr_mask = (hwc->event_base >> 8) & 0xffff; + + for (i = mipspmu.num_counters - 1; i >= 0; i--) { + /* + * Note that some MIPS perf events can be counted by both + * even and odd counters, wheresas many other are only by + * even _or_ odd counters. This introduces an issue that + * when the former kind of event takes the counter the + * latter kind of event wants to use, then the "counter + * allocation" for the latter event will fail. In fact if + * they can be dynamically swapped, they both feel happy. + * But here we leave this issue alone for now. + */ + if (test_bit(i, &cntr_mask) && + !test_and_set_bit(i, cpuc->used_mask)) + return i; + } + + return -EAGAIN; +} + +static void mipsxx_pmu_enable_event(struct hw_perf_event *evt, int idx) +{ + struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); + + WARN_ON(idx < 0 || idx >= mipspmu.num_counters); + + cpuc->saved_ctrl[idx] = M_PERFCTL_EVENT(evt->event_base & 0xff) | + (evt->config_base & M_PERFCTL_CONFIG_MASK) | + /* Make sure interrupt enabled. */ + M_PERFCTL_INTERRUPT_ENABLE; + /* + * We do not actually let the counter run. Leave it until start(). + */ +} + +static void mipsxx_pmu_disable_event(int idx) +{ + struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); + unsigned long flags; + + WARN_ON(idx < 0 || idx >= mipspmu.num_counters); + + local_irq_save(flags); + cpuc->saved_ctrl[idx] = mipsxx_pmu_read_control(idx) & + ~M_PERFCTL_COUNT_EVENT_WHENEVER; + mipsxx_pmu_write_control(idx, cpuc->saved_ctrl[idx]); + local_irq_restore(flags); +} + +static int mipspmu_event_set_period(struct perf_event *event, + struct hw_perf_event *hwc, + int idx) +{ + u64 left = local64_read(&hwc->period_left); + u64 period = hwc->sample_period; + int ret = 0; + + if (unlikely((left + period) & (1ULL << 63))) { + /* left underflowed by more than period. */ + left = period; + local64_set(&hwc->period_left, left); + hwc->last_period = period; + ret = 1; + } else if (unlikely((left + period) <= period)) { + /* left underflowed by less than period. */ + left += period; + local64_set(&hwc->period_left, left); + hwc->last_period = period; + ret = 1; + } + + if (left > mipspmu.max_period) { + left = mipspmu.max_period; + local64_set(&hwc->period_left, left); + } + + local64_set(&hwc->prev_count, mipspmu.overflow - left); + + mipspmu.write_counter(idx, mipspmu.overflow - left); + + perf_event_update_userpage(event); + + return ret; +} + +static void mipspmu_event_update(struct perf_event *event, + struct hw_perf_event *hwc, + int idx) +{ + u64 prev_raw_count, new_raw_count; + u64 delta; + +again: + prev_raw_count = local64_read(&hwc->prev_count); + new_raw_count = mipspmu.read_counter(idx); + + if (local64_cmpxchg(&hwc->prev_count, prev_raw_count, + new_raw_count) != prev_raw_count) + goto again; + + delta = new_raw_count - prev_raw_count; + + local64_add(delta, &event->count); + local64_sub(delta, &hwc->period_left); +} + +static void mipspmu_start(struct perf_event *event, int flags) +{ + struct hw_perf_event *hwc = &event->hw; + + if (flags & PERF_EF_RELOAD) + WARN_ON_ONCE(!(hwc->state & PERF_HES_UPTODATE)); + + hwc->state = 0; + + /* Set the period for the event. */ + mipspmu_event_set_period(event, hwc, hwc->idx); + + /* Enable the event. */ + mipsxx_pmu_enable_event(hwc, hwc->idx); +} + +static void mipspmu_stop(struct perf_event *event, int flags) +{ + struct hw_perf_event *hwc = &event->hw; + + if (!(hwc->state & PERF_HES_STOPPED)) { + /* We are working on a local event. */ + mipsxx_pmu_disable_event(hwc->idx); + barrier(); + mipspmu_event_update(event, hwc, hwc->idx); + hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE; + } +} + +static int mipspmu_add(struct perf_event *event, int flags) +{ + struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); + struct hw_perf_event *hwc = &event->hw; + int idx; + int err = 0; + + perf_pmu_disable(event->pmu); + + /* To look for a free counter for this event. */ + idx = mipsxx_pmu_alloc_counter(cpuc, hwc); + if (idx < 0) { + err = idx; + goto out; + } + + /* + * If there is an event in the counter we are going to use then + * make sure it is disabled. + */ + event->hw.idx = idx; + mipsxx_pmu_disable_event(idx); + cpuc->events[idx] = event; + + hwc->state = PERF_HES_STOPPED | PERF_HES_UPTODATE; + if (flags & PERF_EF_START) + mipspmu_start(event, PERF_EF_RELOAD); + + /* Propagate our changes to the userspace mapping. */ + perf_event_update_userpage(event); + +out: + perf_pmu_enable(event->pmu); + return err; +} + +static void mipspmu_del(struct perf_event *event, int flags) +{ + struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); + struct hw_perf_event *hwc = &event->hw; + int idx = hwc->idx; + + WARN_ON(idx < 0 || idx >= mipspmu.num_counters); + + mipspmu_stop(event, PERF_EF_UPDATE); + cpuc->events[idx] = NULL; + clear_bit(idx, cpuc->used_mask); + + perf_event_update_userpage(event); +} + +static void mipspmu_read(struct perf_event *event) +{ + struct hw_perf_event *hwc = &event->hw; + + /* Don't read disabled counters! */ + if (hwc->idx < 0) return; + + mipspmu_event_update(event, hwc, hwc->idx); +} + +static void mipspmu_enable(struct pmu *pmu) +{ +#ifdef CONFIG_MIPS_MT_SMP + write_unlock(&pmuint_rwlock); +#endif + resume_local_counters(); +} + +/* + * MIPS performance counters can be per-TC. The control registers can + * not be directly accessed accross CPUs. Hence if we want to do global + * control, we need cross CPU calls. on_each_cpu() can help us, but we + * can not make sure this function is called with interrupts enabled. So + * here we pause local counters and then grab a rwlock and leave the + * counters on other CPUs alone. If any counter interrupt raises while + * we own the write lock, simply pause local counters on that CPU and + * spin in the handler. Also we know we won't be switched to another + * CPU after pausing local counters and before grabbing the lock. + */ +static void mipspmu_disable(struct pmu *pmu) +{ + pause_local_counters(); +#ifdef CONFIG_MIPS_MT_SMP + write_lock(&pmuint_rwlock); +#endif +} + +static atomic_t active_events = ATOMIC_INIT(0); +static DEFINE_MUTEX(pmu_reserve_mutex); +static int (*save_perf_irq)(void); + +static int mipspmu_get_irq(void) +{ + int err; + + if (mipspmu.irq >= 0) { + /* Request my own irq handler. */ + err = request_irq(mipspmu.irq, mipsxx_pmu_handle_irq, + IRQF_PERCPU | IRQF_NOBALANCING, + "mips_perf_pmu", NULL); + if (err) { + pr_warning("Unable to request IRQ%d for MIPS " + "performance counters!\n", mipspmu.irq); + } + } else if (cp0_perfcount_irq < 0) { + /* + * We are sharing the irq number with the timer interrupt. + */ + save_perf_irq = perf_irq; + perf_irq = mipsxx_pmu_handle_shared_irq; + err = 0; + } else { + pr_warning("The platform hasn't properly defined its " + "interrupt controller.\n"); + err = -ENOENT; } + + return err; +} + +static void mipspmu_free_irq(void) +{ + if (mipspmu.irq >= 0) + free_irq(mipspmu.irq, NULL); + else if (cp0_perfcount_irq < 0) + perf_irq = save_perf_irq; } +/* + * mipsxx/rm9000/loongson2 have different performance counters, they have + * specific low-level init routines. + */ +static void reset_counters(void *arg); +static int __hw_perf_event_init(struct perf_event *event); + +static void hw_perf_event_destroy(struct perf_event *event) +{ + if (atomic_dec_and_mutex_lock(&active_events, + &pmu_reserve_mutex)) { + /* + * We must not call the destroy function with interrupts + * disabled. + */ + on_each_cpu(reset_counters, + (void *)(long)mipspmu.num_counters, 1); + mipspmu_free_irq(); + mutex_unlock(&pmu_reserve_mutex); + } +} + +static int mipspmu_event_init(struct perf_event *event) +{ + int err = 0; + + switch (event->attr.type) { + case PERF_TYPE_RAW: + case PERF_TYPE_HARDWARE: + case PERF_TYPE_HW_CACHE: + break; + + default: + return -ENOENT; + } + + if (event->cpu >= nr_cpumask_bits || + (event->cpu >= 0 && !cpu_online(event->cpu))) + return -ENODEV; + + if (!atomic_inc_not_zero(&active_events)) { + if (atomic_read(&active_events) > MIPS_MAX_HWEVENTS) { + atomic_dec(&active_events); + return -ENOSPC; + } + + mutex_lock(&pmu_reserve_mutex); + if (atomic_read(&active_events) == 0) + err = mipspmu_get_irq(); + + if (!err) + atomic_inc(&active_events); + mutex_unlock(&pmu_reserve_mutex); + } + + if (err) + return err; + + err = __hw_perf_event_init(event); + if (err) + hw_perf_event_destroy(event); + + return err; +} + +static struct pmu pmu = { + .pmu_enable = mipspmu_enable, + .pmu_disable = mipspmu_disable, + .event_init = mipspmu_event_init, + .add = mipspmu_add, + .del = mipspmu_del, + .start = mipspmu_start, + .stop = mipspmu_stop, + .read = mipspmu_read, +}; + +static unsigned int mipspmu_perf_event_encode(const struct mips_perf_event *pev) +{ +/* + * Top 8 bits for range, next 16 bits for cntr_mask, lowest 8 bits for + * event_id. + */ #ifdef CONFIG_MIPS_MT_SMP -static DEFINE_RWLOCK(pmuint_rwlock); + return ((unsigned int)pev->range << 24) | + (pev->cntr_mask & 0xffff00) | + (pev->event_id & 0xff); +#else + return (pev->cntr_mask & 0xffff00) | + (pev->event_id & 0xff); #endif +} + +static const struct mips_perf_event *mipspmu_map_general_event(int idx) +{ + const struct mips_perf_event *pev; + + pev = ((*mipspmu.general_event_map)[idx].event_id == + UNSUPPORTED_PERF_EVENT_ID ? ERR_PTR(-EOPNOTSUPP) : + &(*mipspmu.general_event_map)[idx]); + + return pev; +} + +static const struct mips_perf_event *mipspmu_map_cache_event(u64 config) +{ + unsigned int cache_type, cache_op, cache_result; + const struct mips_perf_event *pev; + + cache_type = (config >> 0) & 0xff; + if (cache_type >= PERF_COUNT_HW_CACHE_MAX) + return ERR_PTR(-EINVAL); + + cache_op = (config >> 8) & 0xff; + if (cache_op >= PERF_COUNT_HW_CACHE_OP_MAX) + return ERR_PTR(-EINVAL); + + cache_result = (config >> 16) & 0xff; + if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX) + return ERR_PTR(-EINVAL); + + pev = &((*mipspmu.cache_event_map) + [cache_type] + [cache_op] + [cache_result]); + + if (pev->event_id == UNSUPPORTED_PERF_EVENT_ID) + return ERR_PTR(-EOPNOTSUPP); + + return pev; + +} + +static int validate_event(struct cpu_hw_events *cpuc, + struct perf_event *event) +{ + struct hw_perf_event fake_hwc = event->hw; + + /* Allow mixed event group. So return 1 to pass validation. */ + if (event->pmu != &pmu || event->state <= PERF_EVENT_STATE_OFF) + return 1; + + return mipsxx_pmu_alloc_counter(cpuc, &fake_hwc) >= 0; +} + +static int validate_group(struct perf_event *event) +{ + struct perf_event *sibling, *leader = event->group_leader; + struct cpu_hw_events fake_cpuc; + + memset(&fake_cpuc, 0, sizeof(fake_cpuc)); + + if (!validate_event(&fake_cpuc, leader)) + return -ENOSPC; + + list_for_each_entry(sibling, &leader->sibling_list, group_entry) { + if (!validate_event(&fake_cpuc, sibling)) + return -ENOSPC; + } + + if (!validate_event(&fake_cpuc, event)) + return -ENOSPC; + + return 0; +} + +/* This is needed by specific irq handlers in perf_event_*.c */ +static void handle_associated_event(struct cpu_hw_events *cpuc, + int idx, struct perf_sample_data *data, + struct pt_regs *regs) +{ + struct perf_event *event = cpuc->events[idx]; + struct hw_perf_event *hwc = &event->hw; + + mipspmu_event_update(event, hwc, idx); + data->period = event->hw.last_period; + if (!mipspmu_event_set_period(event, hwc, idx)) + return; + + if (perf_event_overflow(event, data, regs)) + mipsxx_pmu_disable_event(idx); +} + + +static int __n_counters(void) +{ + if (!(read_c0_config1() & M_CONFIG1_PC)) + return 0; + if (!(read_c0_perfctrl0() & M_PERFCTL_MORE)) + return 1; + if (!(read_c0_perfctrl1() & M_PERFCTL_MORE)) + return 2; + if (!(read_c0_perfctrl2() & M_PERFCTL_MORE)) + return 3; + + return 4; +} + +static int n_counters(void) +{ + int counters; + + switch (current_cpu_type()) { + case CPU_R10000: + counters = 2; + break; + + case CPU_R12000: + case CPU_R14000: + counters = 4; + break; + + default: + counters = __n_counters(); + } + + return counters; +} + +static void reset_counters(void *arg) +{ + int counters = (int)(long)arg; + switch (counters) { + case 4: + mipsxx_pmu_write_control(3, 0); + mipspmu.write_counter(3, 0); + case 3: + mipsxx_pmu_write_control(2, 0); + mipspmu.write_counter(2, 0); + case 2: + mipsxx_pmu_write_control(1, 0); + mipspmu.write_counter(1, 0); + case 1: + mipsxx_pmu_write_control(0, 0); + mipspmu.write_counter(0, 0); + } +} /* 24K/34K/1004K cores can share the same event map. */ static const struct mips_perf_event mipsxxcore_event_map @@ -277,6 +841,16 @@ static const struct mips_perf_event mipsxx74Kcore_event_map [PERF_COUNT_HW_BUS_CYCLES] = { UNSUPPORTED_PERF_EVENT_ID }, }; +static const struct mips_perf_event octeon_event_map[PERF_COUNT_HW_MAX] = { + [PERF_COUNT_HW_CPU_CYCLES] = { 0x01, CNTR_ALL }, + [PERF_COUNT_HW_INSTRUCTIONS] = { 0x03, CNTR_ALL }, + [PERF_COUNT_HW_CACHE_REFERENCES] = { 0x2b, CNTR_ALL }, + [PERF_COUNT_HW_CACHE_MISSES] = { 0x2e, CNTR_ALL }, + [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = { 0x08, CNTR_ALL }, + [PERF_COUNT_HW_BRANCH_MISSES] = { 0x09, CNTR_ALL }, + [PERF_COUNT_HW_BUS_CYCLES] = { 0x25, CNTR_ALL }, +}; + /* 24K/34K/1004K cores can share the same cache event map. */ static const struct mips_perf_event mipsxxcore_cache_map [PERF_COUNT_HW_CACHE_MAX] @@ -510,10 +1084,105 @@ static const struct mips_perf_event mipsxx74Kcore_cache_map }, }; + +static const struct mips_perf_event octeon_cache_map + [PERF_COUNT_HW_CACHE_MAX] + [PERF_COUNT_HW_CACHE_OP_MAX] + [PERF_COUNT_HW_CACHE_RESULT_MAX] = { +[C(L1D)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = { 0x2b, CNTR_ALL }, + [C(RESULT_MISS)] = { 0x2e, CNTR_ALL }, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = { 0x30, CNTR_ALL }, + [C(RESULT_MISS)] = { UNSUPPORTED_PERF_EVENT_ID }, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = { UNSUPPORTED_PERF_EVENT_ID }, + [C(RESULT_MISS)] = { UNSUPPORTED_PERF_EVENT_ID }, + }, +}, +[C(L1I)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = { 0x18, CNTR_ALL }, + [C(RESULT_MISS)] = { UNSUPPORTED_PERF_EVENT_ID }, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = { UNSUPPORTED_PERF_EVENT_ID }, + [C(RESULT_MISS)] = { UNSUPPORTED_PERF_EVENT_ID }, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = { 0x19, CNTR_ALL }, + [C(RESULT_MISS)] = { UNSUPPORTED_PERF_EVENT_ID }, + }, +}, +[C(LL)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = { UNSUPPORTED_PERF_EVENT_ID }, + [C(RESULT_MISS)] = { UNSUPPORTED_PERF_EVENT_ID }, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = { UNSUPPORTED_PERF_EVENT_ID }, + [C(RESULT_MISS)] = { UNSUPPORTED_PERF_EVENT_ID }, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = { UNSUPPORTED_PERF_EVENT_ID }, + [C(RESULT_MISS)] = { UNSUPPORTED_PERF_EVENT_ID }, + }, +}, +[C(DTLB)] = { + /* + * Only general DTLB misses are counted use the same event for + * read and write. + */ + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = { UNSUPPORTED_PERF_EVENT_ID }, + [C(RESULT_MISS)] = { 0x35, CNTR_ALL }, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = { UNSUPPORTED_PERF_EVENT_ID }, + [C(RESULT_MISS)] = { 0x35, CNTR_ALL }, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = { UNSUPPORTED_PERF_EVENT_ID }, + [C(RESULT_MISS)] = { UNSUPPORTED_PERF_EVENT_ID }, + }, +}, +[C(ITLB)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = { UNSUPPORTED_PERF_EVENT_ID }, + [C(RESULT_MISS)] = { 0x37, CNTR_ALL }, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = { UNSUPPORTED_PERF_EVENT_ID }, + [C(RESULT_MISS)] = { UNSUPPORTED_PERF_EVENT_ID }, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = { UNSUPPORTED_PERF_EVENT_ID }, + [C(RESULT_MISS)] = { UNSUPPORTED_PERF_EVENT_ID }, + }, +}, +[C(BPU)] = { + /* Using the same code for *HW_BRANCH* */ + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = { UNSUPPORTED_PERF_EVENT_ID }, + [C(RESULT_MISS)] = { UNSUPPORTED_PERF_EVENT_ID }, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = { UNSUPPORTED_PERF_EVENT_ID }, + [C(RESULT_MISS)] = { UNSUPPORTED_PERF_EVENT_ID }, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = { UNSUPPORTED_PERF_EVENT_ID }, + [C(RESULT_MISS)] = { UNSUPPORTED_PERF_EVENT_ID }, + }, +}, +}; + #ifdef CONFIG_MIPS_MT_SMP -static void -check_and_calc_range(struct perf_event *event, - const struct mips_perf_event *pev) +static void check_and_calc_range(struct perf_event *event, + const struct mips_perf_event *pev) { struct hw_perf_event *hwc = &event->hw; @@ -536,9 +1205,8 @@ check_and_calc_range(struct perf_event *event, hwc->config_base |= M_TC_EN_ALL; } #else -static void -check_and_calc_range(struct perf_event *event, - const struct mips_perf_event *pev) +static void check_and_calc_range(struct perf_event *event, + const struct mips_perf_event *pev) { } #endif @@ -560,7 +1228,7 @@ static int __hw_perf_event_init(struct perf_event *event) } else if (PERF_TYPE_RAW == event->attr.type) { /* We are working on the global raw event. */ mutex_lock(&raw_event_mutex); - pev = mipspmu->map_raw_event(event->attr.config); + pev = mipspmu.map_raw_event(event->attr.config); } else { /* The event type is not (yet) supported. */ return -EOPNOTSUPP; @@ -605,7 +1273,7 @@ static int __hw_perf_event_init(struct perf_event *event) hwc->config = 0; if (!hwc->sample_period) { - hwc->sample_period = MAX_PERIOD; + hwc->sample_period = mipspmu.max_period; hwc->last_period = hwc->sample_period; local64_set(&hwc->period_left, hwc->sample_period); } @@ -618,70 +1286,47 @@ static int __hw_perf_event_init(struct perf_event *event) } event->destroy = hw_perf_event_destroy; - return err; } static void pause_local_counters(void) { struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); - int counters = mipspmu->num_counters; + int ctr = mipspmu.num_counters; unsigned long flags; local_irq_save(flags); - switch (counters) { - case 4: - cpuc->saved_ctrl[3] = r_c0_perfctrl3(); - w_c0_perfctrl3(cpuc->saved_ctrl[3] & - ~M_PERFCTL_COUNT_EVENT_WHENEVER); - case 3: - cpuc->saved_ctrl[2] = r_c0_perfctrl2(); - w_c0_perfctrl2(cpuc->saved_ctrl[2] & - ~M_PERFCTL_COUNT_EVENT_WHENEVER); - case 2: - cpuc->saved_ctrl[1] = r_c0_perfctrl1(); - w_c0_perfctrl1(cpuc->saved_ctrl[1] & - ~M_PERFCTL_COUNT_EVENT_WHENEVER); - case 1: - cpuc->saved_ctrl[0] = r_c0_perfctrl0(); - w_c0_perfctrl0(cpuc->saved_ctrl[0] & - ~M_PERFCTL_COUNT_EVENT_WHENEVER); - } + do { + ctr--; + cpuc->saved_ctrl[ctr] = mipsxx_pmu_read_control(ctr); + mipsxx_pmu_write_control(ctr, cpuc->saved_ctrl[ctr] & + ~M_PERFCTL_COUNT_EVENT_WHENEVER); + } while (ctr > 0); local_irq_restore(flags); } static void resume_local_counters(void) { struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); - int counters = mipspmu->num_counters; - unsigned long flags; + int ctr = mipspmu.num_counters; - local_irq_save(flags); - switch (counters) { - case 4: - w_c0_perfctrl3(cpuc->saved_ctrl[3]); - case 3: - w_c0_perfctrl2(cpuc->saved_ctrl[2]); - case 2: - w_c0_perfctrl1(cpuc->saved_ctrl[1]); - case 1: - w_c0_perfctrl0(cpuc->saved_ctrl[0]); - } - local_irq_restore(flags); + do { + ctr--; + mipsxx_pmu_write_control(ctr, cpuc->saved_ctrl[ctr]); + } while (ctr > 0); } static int mipsxx_pmu_handle_shared_irq(void) { struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); struct perf_sample_data data; - unsigned int counters = mipspmu->num_counters; - unsigned int counter; + unsigned int counters = mipspmu.num_counters; + u64 counter; int handled = IRQ_NONE; struct pt_regs *regs; if (cpu_has_mips_r2 && !(read_c0_cause() & (1 << 26))) return handled; - /* * First we pause the local counters, so that when we are locked * here, the counters are all paused. When it gets locked due to @@ -702,13 +1347,9 @@ static int mipsxx_pmu_handle_shared_irq(void) #define HANDLE_COUNTER(n) \ case n + 1: \ if (test_bit(n, cpuc->used_mask)) { \ - counter = r_c0_perfcntr ## n(); \ - if (counter & M_COUNTER_OVERFLOW) { \ - w_c0_perfcntr ## n(counter & \ - VALID_COUNT); \ - if (test_and_change_bit(n, cpuc->msbs)) \ - handle_associated_event(cpuc, \ - n, &data, regs); \ + counter = mipspmu.read_counter(n); \ + if (counter & mipspmu.overflow) { \ + handle_associated_event(cpuc, n, &data, regs); \ handled = IRQ_HANDLED; \ } \ } @@ -733,104 +1374,11 @@ static int mipsxx_pmu_handle_shared_irq(void) return handled; } -static irqreturn_t -mipsxx_pmu_handle_irq(int irq, void *dev) +static irqreturn_t mipsxx_pmu_handle_irq(int irq, void *dev) { return mipsxx_pmu_handle_shared_irq(); } -static void mipsxx_pmu_start(void) -{ -#ifdef CONFIG_MIPS_MT_SMP - write_unlock(&pmuint_rwlock); -#endif - resume_local_counters(); -} - -/* - * MIPS performance counters can be per-TC. The control registers can - * not be directly accessed across CPUs. Hence if we want to do global - * control, we need cross CPU calls. on_each_cpu() can help us, but we - * can not make sure this function is called with interrupts enabled. So - * here we pause local counters and then grab a rwlock and leave the - * counters on other CPUs alone. If any counter interrupt raises while - * we own the write lock, simply pause local counters on that CPU and - * spin in the handler. Also we know we won't be switched to another - * CPU after pausing local counters and before grabbing the lock. - */ -static void mipsxx_pmu_stop(void) -{ - pause_local_counters(); -#ifdef CONFIG_MIPS_MT_SMP - write_lock(&pmuint_rwlock); -#endif -} - -static int -mipsxx_pmu_alloc_counter(struct cpu_hw_events *cpuc, - struct hw_perf_event *hwc) -{ - int i; - - /* - * We only need to care the counter mask. The range has been - * checked definitely. - */ - unsigned long cntr_mask = (hwc->event_base >> 8) & 0xffff; - - for (i = mipspmu->num_counters - 1; i >= 0; i--) { - /* - * Note that some MIPS perf events can be counted by both - * even and odd counters, wheresas many other are only by - * even _or_ odd counters. This introduces an issue that - * when the former kind of event takes the counter the - * latter kind of event wants to use, then the "counter - * allocation" for the latter event will fail. In fact if - * they can be dynamically swapped, they both feel happy. - * But here we leave this issue alone for now. - */ - if (test_bit(i, &cntr_mask) && - !test_and_set_bit(i, cpuc->used_mask)) - return i; - } - - return -EAGAIN; -} - -static void -mipsxx_pmu_enable_event(struct hw_perf_event *evt, int idx) -{ - struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); - unsigned long flags; - - WARN_ON(idx < 0 || idx >= mipspmu->num_counters); - - local_irq_save(flags); - cpuc->saved_ctrl[idx] = M_PERFCTL_EVENT(evt->event_base & 0xff) | - (evt->config_base & M_PERFCTL_CONFIG_MASK) | - /* Make sure interrupt enabled. */ - M_PERFCTL_INTERRUPT_ENABLE; - /* - * We do not actually let the counter run. Leave it until start(). - */ - local_irq_restore(flags); -} - -static void -mipsxx_pmu_disable_event(int idx) -{ - struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); - unsigned long flags; - - WARN_ON(idx < 0 || idx >= mipspmu->num_counters); - - local_irq_save(flags); - cpuc->saved_ctrl[idx] = mipsxx_pmu_read_control(idx) & - ~M_PERFCTL_COUNT_EVENT_WHENEVER; - mipsxx_pmu_write_control(idx, cpuc->saved_ctrl[idx]); - local_irq_restore(flags); -} - /* 24K */ #define IS_UNSUPPORTED_24K_EVENT(r, b) \ ((b) == 12 || (r) == 151 || (r) == 152 || (b) == 26 || \ @@ -892,8 +1440,7 @@ mipsxx_pmu_disable_event(int idx) * then 128 needs to be added to 15 as the input for the event config, * i.e., 143 (0x8F) to be used. */ -static const struct mips_perf_event * -mipsxx_pmu_map_raw_event(u64 config) +static const struct mips_perf_event *mipsxx_pmu_map_raw_event(u64 config) { unsigned int raw_id = config & 0xff; unsigned int base_id = raw_id & 0x7f; @@ -970,40 +1517,44 @@ mipsxx_pmu_map_raw_event(u64 config) return &raw_event; } -static struct mips_pmu mipsxxcore_pmu = { - .handle_irq = mipsxx_pmu_handle_irq, - .handle_shared_irq = mipsxx_pmu_handle_shared_irq, - .start = mipsxx_pmu_start, - .stop = mipsxx_pmu_stop, - .alloc_counter = mipsxx_pmu_alloc_counter, - .read_counter = mipsxx_pmu_read_counter, - .write_counter = mipsxx_pmu_write_counter, - .enable_event = mipsxx_pmu_enable_event, - .disable_event = mipsxx_pmu_disable_event, - .map_raw_event = mipsxx_pmu_map_raw_event, - .general_event_map = &mipsxxcore_event_map, - .cache_event_map = &mipsxxcore_cache_map, -}; +static const struct mips_perf_event *octeon_pmu_map_raw_event(u64 config) +{ + unsigned int raw_id = config & 0xff; + unsigned int base_id = raw_id & 0x7f; -static struct mips_pmu mipsxx74Kcore_pmu = { - .handle_irq = mipsxx_pmu_handle_irq, - .handle_shared_irq = mipsxx_pmu_handle_shared_irq, - .start = mipsxx_pmu_start, - .stop = mipsxx_pmu_stop, - .alloc_counter = mipsxx_pmu_alloc_counter, - .read_counter = mipsxx_pmu_read_counter, - .write_counter = mipsxx_pmu_write_counter, - .enable_event = mipsxx_pmu_enable_event, - .disable_event = mipsxx_pmu_disable_event, - .map_raw_event = mipsxx_pmu_map_raw_event, - .general_event_map = &mipsxx74Kcore_event_map, - .cache_event_map = &mipsxx74Kcore_cache_map, -}; + + raw_event.cntr_mask = CNTR_ALL; + raw_event.event_id = base_id; + + if (current_cpu_type() == CPU_CAVIUM_OCTEON2) { + if (base_id > 0x42) + return ERR_PTR(-EOPNOTSUPP); + } else { + if (base_id > 0x3a) + return ERR_PTR(-EOPNOTSUPP); + } + + switch (base_id) { + case 0x00: + case 0x0f: + case 0x1e: + case 0x1f: + case 0x2f: + case 0x34: + case 0x3b ... 0x3f: + return ERR_PTR(-EOPNOTSUPP); + default: + break; + } + + return &raw_event; +} static int __init init_hw_perf_events(void) { int counters, irq; + int counter_bits; pr_info("Performance counters: "); @@ -1035,32 +1586,36 @@ init_hw_perf_events(void) } #endif - on_each_cpu(reset_counters, (void *)(long)counters, 1); + mipspmu.map_raw_event = mipsxx_pmu_map_raw_event; switch (current_cpu_type()) { case CPU_24K: - mipsxxcore_pmu.name = "mips/24K"; - mipsxxcore_pmu.num_counters = counters; - mipsxxcore_pmu.irq = irq; - mipspmu = &mipsxxcore_pmu; + mipspmu.name = "mips/24K"; + mipspmu.general_event_map = &mipsxxcore_event_map; + mipspmu.cache_event_map = &mipsxxcore_cache_map; break; case CPU_34K: - mipsxxcore_pmu.name = "mips/34K"; - mipsxxcore_pmu.num_counters = counters; - mipsxxcore_pmu.irq = irq; - mipspmu = &mipsxxcore_pmu; + mipspmu.name = "mips/34K"; + mipspmu.general_event_map = &mipsxxcore_event_map; + mipspmu.cache_event_map = &mipsxxcore_cache_map; break; case CPU_74K: - mipsxx74Kcore_pmu.name = "mips/74K"; - mipsxx74Kcore_pmu.num_counters = counters; - mipsxx74Kcore_pmu.irq = irq; - mipspmu = &mipsxx74Kcore_pmu; + mipspmu.name = "mips/74K"; + mipspmu.general_event_map = &mipsxx74Kcore_event_map; + mipspmu.cache_event_map = &mipsxx74Kcore_cache_map; break; case CPU_1004K: - mipsxxcore_pmu.name = "mips/1004K"; - mipsxxcore_pmu.num_counters = counters; - mipsxxcore_pmu.irq = irq; - mipspmu = &mipsxxcore_pmu; + mipspmu.name = "mips/1004K"; + mipspmu.general_event_map = &mipsxxcore_event_map; + mipspmu.cache_event_map = &mipsxxcore_cache_map; + break; + case CPU_CAVIUM_OCTEON: + case CPU_CAVIUM_OCTEON_PLUS: + case CPU_CAVIUM_OCTEON2: + mipspmu.name = "octeon"; + mipspmu.general_event_map = &octeon_event_map; + mipspmu.cache_event_map = &octeon_cache_map; + mipspmu.map_raw_event = octeon_pmu_map_raw_event; break; default: pr_cont("Either hardware does not support performance " @@ -1068,15 +1623,33 @@ init_hw_perf_events(void) return -ENODEV; } - if (mipspmu) - pr_cont("%s PMU enabled, %d counters available to each " - "CPU, irq %d%s\n", mipspmu->name, counters, irq, - irq < 0 ? " (share with timer interrupt)" : ""); + mipspmu.num_counters = counters; + mipspmu.irq = irq; + + if (read_c0_perfctrl0() & M_PERFCTL_WIDE) { + mipspmu.max_period = (1ULL << 63) - 1; + mipspmu.valid_count = (1ULL << 63) - 1; + mipspmu.overflow = 1ULL << 63; + mipspmu.read_counter = mipsxx_pmu_read_counter_64; + mipspmu.write_counter = mipsxx_pmu_write_counter_64; + counter_bits = 64; + } else { + mipspmu.max_period = (1ULL << 31) - 1; + mipspmu.valid_count = (1ULL << 31) - 1; + mipspmu.overflow = 1ULL << 31; + mipspmu.read_counter = mipsxx_pmu_read_counter; + mipspmu.write_counter = mipsxx_pmu_write_counter; + counter_bits = 32; + } + + on_each_cpu(reset_counters, (void *)(long)counters, 1); + + pr_cont("%s PMU enabled, %d %d-bit counters available to each " + "CPU, irq %d%s\n", mipspmu.name, counters, counter_bits, irq, + irq < 0 ? " (share with timer interrupt)" : ""); perf_pmu_register(&pmu, "cpu", PERF_TYPE_RAW); return 0; } early_initcall(init_hw_perf_events); - -#endif /* defined(CONFIG_CPU_MIPS32)... */ diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S index 865bc7a6f5a..47920657968 100644 --- a/arch/mips/kernel/scall32-o32.S +++ b/arch/mips/kernel/scall32-o32.S @@ -496,7 +496,7 @@ einval: li v0, -ENOSYS sys sys_lookup_dcookie 4 sys sys_epoll_create 1 sys sys_epoll_ctl 4 - sys sys_epoll_wait 3 /* 4250 */ + sys sys_epoll_wait 4 /* 4250 */ sys sys_remap_file_pages 5 sys sys_set_tid_address 1 sys sys_restart_syscall 0 diff --git a/arch/mips/mm/c-octeon.c b/arch/mips/mm/c-octeon.c index 16c4d256b76..daa81f7284a 100644 --- a/arch/mips/mm/c-octeon.c +++ b/arch/mips/mm/c-octeon.c @@ -169,6 +169,10 @@ static void octeon_flush_cache_page(struct vm_area_struct *vma, octeon_flush_icache_all_cores(vma); } +static void octeon_flush_kernel_vmap_range(unsigned long vaddr, int size) +{ + BUG(); +} /** * Probe Octeon's caches @@ -273,6 +277,8 @@ void __cpuinit octeon_cache_init(void) flush_icache_range = octeon_flush_icache_range; local_flush_icache_range = local_octeon_flush_icache_range; + __flush_kernel_vmap_range = octeon_flush_kernel_vmap_range; + build_clear_page(); build_copy_page(); } diff --git a/arch/mips/mm/c-r3k.c b/arch/mips/mm/c-r3k.c index e6b0efd3f6a..0765583d0c9 100644 --- a/arch/mips/mm/c-r3k.c +++ b/arch/mips/mm/c-r3k.c @@ -299,6 +299,11 @@ static void r3k_flush_cache_sigtramp(unsigned long addr) write_c0_status(flags); } +static void r3k_flush_kernel_vmap_range(unsigned long vaddr, int size) +{ + BUG(); +} + static void r3k_dma_cache_wback_inv(unsigned long start, unsigned long size) { /* Catch bad driver code */ @@ -323,6 +328,8 @@ void __cpuinit r3k_cache_init(void) flush_icache_range = r3k_flush_icache_range; local_flush_icache_range = r3k_flush_icache_range; + __flush_kernel_vmap_range = r3k_flush_kernel_vmap_range; + flush_cache_sigtramp = r3k_flush_cache_sigtramp; local_flush_data_cache_page = local_r3k_flush_data_cache_page; flush_data_cache_page = r3k_flush_data_cache_page; diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c index b9aabb998a3..a79fe9aa772 100644 --- a/arch/mips/mm/c-r4k.c +++ b/arch/mips/mm/c-r4k.c @@ -722,6 +722,39 @@ static void r4k_flush_icache_all(void) r4k_blast_icache(); } +struct flush_kernel_vmap_range_args { + unsigned long vaddr; + int size; +}; + +static inline void local_r4k_flush_kernel_vmap_range(void *args) +{ + struct flush_kernel_vmap_range_args *vmra = args; + unsigned long vaddr = vmra->vaddr; + int size = vmra->size; + + /* + * Aliases only affect the primary caches so don't bother with + * S-caches or T-caches. + */ + if (cpu_has_safe_index_cacheops && size >= dcache_size) + r4k_blast_dcache(); + else { + R4600_HIT_CACHEOP_WAR_IMPL; + blast_dcache_range(vaddr, vaddr + size); + } +} + +static void r4k_flush_kernel_vmap_range(unsigned long vaddr, int size) +{ + struct flush_kernel_vmap_range_args args; + + args.vaddr = (unsigned long) vaddr; + args.size = size; + + r4k_on_each_cpu(local_r4k_flush_kernel_vmap_range, &args); +} + static inline void rm7k_erratum31(void) { const unsigned long ic_lsize = 32; @@ -1403,6 +1436,8 @@ void __cpuinit r4k_cache_init(void) flush_cache_page = r4k_flush_cache_page; flush_cache_range = r4k_flush_cache_range; + __flush_kernel_vmap_range = r4k_flush_kernel_vmap_range; + flush_cache_sigtramp = r4k_flush_cache_sigtramp; flush_icache_all = r4k_flush_icache_all; local_flush_data_cache_page = local_r4k_flush_data_cache_page; diff --git a/arch/mips/mm/c-tx39.c b/arch/mips/mm/c-tx39.c index d352fad3e45..a43c197ccf8 100644 --- a/arch/mips/mm/c-tx39.c +++ b/arch/mips/mm/c-tx39.c @@ -253,6 +253,11 @@ static void tx39_flush_icache_range(unsigned long start, unsigned long end) } } +static void tx39_flush_kernel_vmap_range(unsigned long vaddr, int size) +{ + BUG(); +} + static void tx39_dma_cache_wback_inv(unsigned long addr, unsigned long size) { unsigned long end; @@ -394,6 +399,8 @@ void __cpuinit tx39_cache_init(void) flush_icache_range = tx39_flush_icache_range; local_flush_icache_range = tx39_flush_icache_range; + __flush_kernel_vmap_range = tx39_flush_kernel_vmap_range; + flush_cache_sigtramp = tx39_flush_cache_sigtramp; local_flush_data_cache_page = local_tx39_flush_data_cache_page; flush_data_cache_page = tx39_flush_data_cache_page; diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c index 12af739048f..829320c7b17 100644 --- a/arch/mips/mm/cache.c +++ b/arch/mips/mm/cache.c @@ -35,6 +35,11 @@ void (*local_flush_icache_range)(unsigned long start, unsigned long end); void (*__flush_cache_vmap)(void); void (*__flush_cache_vunmap)(void); +void (*__flush_kernel_vmap_range)(unsigned long vaddr, int size); +void (*__invalidate_kernel_vmap_range)(unsigned long vaddr, int size); + +EXPORT_SYMBOL_GPL(__flush_kernel_vmap_range); + /* MIPS specific cache operations */ void (*flush_cache_sigtramp)(unsigned long addr); void (*local_flush_data_cache_page)(void * addr); diff --git a/arch/mips/mm/tlb-r3k.c b/arch/mips/mm/tlb-r3k.c index 40424affef8..87bb85d8d53 100644 --- a/arch/mips/mm/tlb-r3k.c +++ b/arch/mips/mm/tlb-r3k.c @@ -223,8 +223,8 @@ void __update_tlb(struct vm_area_struct *vma, unsigned long address, pte_t pte) local_irq_restore(flags); } -void __init add_wired_entry(unsigned long entrylo0, unsigned long entrylo1, - unsigned long entryhi, unsigned long pagemask) +void add_wired_entry(unsigned long entrylo0, unsigned long entrylo1, + unsigned long entryhi, unsigned long pagemask) { unsigned long flags; unsigned long old_ctx; diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c index ba40325caea..0d394e0e883 100644 --- a/arch/mips/mm/tlb-r4k.c +++ b/arch/mips/mm/tlb-r4k.c @@ -337,8 +337,8 @@ void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte) EXIT_CRITICAL(flags); } -void __init add_wired_entry(unsigned long entrylo0, unsigned long entrylo1, - unsigned long entryhi, unsigned long pagemask) +void add_wired_entry(unsigned long entrylo0, unsigned long entrylo1, + unsigned long entryhi, unsigned long pagemask) { unsigned long flags; unsigned long wired; diff --git a/arch/mips/netlogic/Platform b/arch/mips/netlogic/Platform index f87c1640abb..b648b487fd6 100644 --- a/arch/mips/netlogic/Platform +++ b/arch/mips/netlogic/Platform @@ -5,6 +5,11 @@ cflags-$(CONFIG_NLM_COMMON) += -I$(srctree)/arch/mips/include/asm/mach-netlogic cflags-$(CONFIG_NLM_COMMON) += -I$(srctree)/arch/mips/include/asm/netlogic # +# use mips64 if xlr is not available +# +cflags-$(CONFIG_NLM_XLR) += $(call cc-option,-march=xlr,-march=mips64) + +# # NETLOGIC XLR/XLS SoC, Simulator and boards # core-$(CONFIG_NLM_XLR) += arch/mips/netlogic/xlr/ diff --git a/arch/mips/netlogic/xlr/setup.c b/arch/mips/netlogic/xlr/setup.c index 482802569e7..cee25ddd088 100644 --- a/arch/mips/netlogic/xlr/setup.c +++ b/arch/mips/netlogic/xlr/setup.c @@ -53,7 +53,7 @@ unsigned long netlogic_io_base = (unsigned long)(DEFAULT_NETLOGIC_IO_BASE); unsigned long nlm_common_ebase = 0x0; struct psb_info nlm_prom_info; -static void nlm_early_serial_setup(void) +static void __init nlm_early_serial_setup(void) { struct uart_port s; nlm_reg_t *uart_base; @@ -101,7 +101,7 @@ void __init prom_free_prom_memory(void) /* Nothing yet */ } -static void build_arcs_cmdline(int *argv) +static void __init build_arcs_cmdline(int *argv) { int i, remain, len; char *arg; diff --git a/arch/mips/netlogic/xlr/smp.c b/arch/mips/netlogic/xlr/smp.c index d842bce5c94..080284ded50 100644 --- a/arch/mips/netlogic/xlr/smp.c +++ b/arch/mips/netlogic/xlr/smp.c @@ -158,6 +158,10 @@ void __init nlm_smp_setup(void) num_cpus = 1; for (i = 0; i < NR_CPUS; i++) { + /* + * BSP is not set in nlm_cpu_ready array, it is only for + * ASPs (goto see smpboot.S) + */ if (nlm_cpu_ready[i]) { cpu_set(i, phys_cpu_present_map); __cpu_number_map[i] = num_cpus; @@ -191,7 +195,7 @@ struct plat_smp_ops nlm_smp_ops = { unsigned long secondary_entry_point; -int nlm_wakeup_secondary_cpus(u32 wakeup_mask) +int __cpuinit nlm_wakeup_secondary_cpus(u32 wakeup_mask) { unsigned int tid, pid, ipi, i, boot_cpu; void *reset_vec; diff --git a/arch/mips/netlogic/xlr/smpboot.S b/arch/mips/netlogic/xlr/smpboot.S index b8e074402c9..8cb7889ce0c 100644 --- a/arch/mips/netlogic/xlr/smpboot.S +++ b/arch/mips/netlogic/xlr/smpboot.S @@ -32,17 +32,19 @@ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ +#include <linux/init.h> + #include <asm/asm.h> #include <asm/asm-offsets.h> #include <asm/regdef.h> #include <asm/mipsregs.h> - -/* Don't jump to linux function from Bootloader stack. Change it - * here. Kernel might allocate bootloader memory before all the CPUs are - * brought up (eg: Inode cache region) and we better don't overwrite this - * memory +/* + * Early code for secondary CPUs. This will get them out of the bootloader + * code and into linux. Needed because the bootloader area will be taken + * and initialized by linux. */ + __CPUINIT NESTED(prom_pre_boot_secondary_cpus, 16, sp) .set mips64 mfc0 t0, $15, 1 # read ebase @@ -73,7 +75,11 @@ NESTED(prom_pre_boot_secondary_cpus, 16, sp) jr t0 nop END(prom_pre_boot_secondary_cpus) + __FINIT +/* + * NMI code, used for CPU wakeup, copied to reset entry + */ NESTED(nlm_boot_smp_nmi, 0, sp) .set push .set noat diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile index 4df87993744..bb82cbdbc62 100644 --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile @@ -18,14 +18,13 @@ obj-$(CONFIG_PCI_TX4927) += ops-tx4927.o obj-$(CONFIG_BCM47XX) += pci-bcm47xx.o obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o fixup-bcm63xx.o \ ops-bcm63xx.o +obj-$(CONFIG_MIPS_ALCHEMY) += pci-alchemy.o # # These are still pretty much in the old state, watch, go blind. # obj-$(CONFIG_LASAT) += pci-lasat.o obj-$(CONFIG_MIPS_COBALT) += fixup-cobalt.o -obj-$(CONFIG_SOC_AU1500) += fixup-au1000.o ops-au1000.o -obj-$(CONFIG_SOC_AU1550) += fixup-au1000.o ops-au1000.o obj-$(CONFIG_SOC_PNX8550) += fixup-pnx8550.o ops-pnx8550.o obj-$(CONFIG_LEMOTE_FULOONG2E) += fixup-fuloong2e.o ops-loongson2.o obj-$(CONFIG_LEMOTE_MACH2F) += fixup-lemote2f.o ops-loongson2.o diff --git a/arch/mips/pci/fixup-au1000.c b/arch/mips/pci/fixup-au1000.c deleted file mode 100644 index e2ddfc49237..00000000000 --- a/arch/mips/pci/fixup-au1000.c +++ /dev/null @@ -1,43 +0,0 @@ -/* - * BRIEF MODULE DESCRIPTION - * Board specific PCI fixups. - * - * Copyright 2001-2003, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. <source@mvista.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/pci.h> -#include <linux/init.h> - -extern char irq_tab_alchemy[][5]; - -int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - return irq_tab_alchemy[slot][pin]; -} - -/* Do platform specific device initialization at pci_enable_device() time */ -int pcibios_plat_dev_init(struct pci_dev *dev) -{ - return 0; -} diff --git a/arch/mips/pci/ops-au1000.c b/arch/mips/pci/ops-au1000.c deleted file mode 100644 index 9a57c5ab91d..00000000000 --- a/arch/mips/pci/ops-au1000.c +++ /dev/null @@ -1,308 +0,0 @@ -/* - * BRIEF MODULE DESCRIPTION - * Alchemy/AMD Au1xx0 PCI support. - * - * Copyright 2001-2003, 2007-2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. <source@mvista.com> - * - * Support for all devices (greater than 16) added by David Gathright. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/types.h> -#include <linux/pci.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/vmalloc.h> - -#include <asm/mach-au1x00/au1000.h> - -#undef DEBUG -#ifdef DEBUG -#define DBG(x...) printk(KERN_DEBUG x) -#else -#define DBG(x...) -#endif - -#define PCI_ACCESS_READ 0 -#define PCI_ACCESS_WRITE 1 - -int (*board_pci_idsel)(unsigned int devsel, int assert); - -void mod_wired_entry(int entry, unsigned long entrylo0, - unsigned long entrylo1, unsigned long entryhi, - unsigned long pagemask) -{ - unsigned long old_pagemask; - unsigned long old_ctx; - - /* Save old context and create impossible VPN2 value */ - old_ctx = read_c0_entryhi() & 0xff; - old_pagemask = read_c0_pagemask(); - write_c0_index(entry); - write_c0_pagemask(pagemask); - write_c0_entryhi(entryhi); - write_c0_entrylo0(entrylo0); - write_c0_entrylo1(entrylo1); - tlb_write_indexed(); - write_c0_entryhi(old_ctx); - write_c0_pagemask(old_pagemask); -} - -static struct vm_struct *pci_cfg_vm; -static int pci_cfg_wired_entry; -static unsigned long last_entryLo0, last_entryLo1; - -/* - * We can't ioremap the entire pci config space because it's too large. - * Nor can we call ioremap dynamically because some device drivers use - * the PCI config routines from within interrupt handlers and that - * becomes a problem in get_vm_area(). We use one wired TLB to handle - * all config accesses for all busses. - */ -void __init au1x_pci_cfg_init(void) -{ - /* Reserve a wired entry for PCI config accesses */ - pci_cfg_vm = get_vm_area(0x2000, VM_IOREMAP); - if (!pci_cfg_vm) - panic(KERN_ERR "PCI unable to get vm area\n"); - pci_cfg_wired_entry = read_c0_wired(); - add_wired_entry(0, 0, (unsigned long)pci_cfg_vm->addr, PM_4K); - last_entryLo0 = last_entryLo1 = 0xffffffff; -} - -static int config_access(unsigned char access_type, struct pci_bus *bus, - unsigned int dev_fn, unsigned char where, u32 *data) -{ -#if defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550) - unsigned int device = PCI_SLOT(dev_fn); - unsigned int function = PCI_FUNC(dev_fn); - unsigned long offset, status; - unsigned long cfg_base; - unsigned long flags; - int error = PCIBIOS_SUCCESSFUL; - unsigned long entryLo0, entryLo1; - - if (device > 19) { - *data = 0xffffffff; - return -1; - } - - local_irq_save(flags); - au_writel(((0x2000 << 16) | (au_readl(Au1500_PCI_STATCMD) & 0xffff)), - Au1500_PCI_STATCMD); - au_sync_udelay(1); - - /* - * Allow board vendors to implement their own off-chip IDSEL. - * If it doesn't succeed, may as well bail out at this point. - */ - if (board_pci_idsel && board_pci_idsel(device, 1) == 0) { - *data = 0xffffffff; - local_irq_restore(flags); - return -1; - } - - /* Setup the config window */ - if (bus->number == 0) - cfg_base = (1 << device) << 11; - else - cfg_base = 0x80000000 | (bus->number << 16) | (device << 11); - - /* Setup the lower bits of the 36-bit address */ - offset = (function << 8) | (where & ~0x3); - /* Pick up any address that falls below the page mask */ - offset |= cfg_base & ~PAGE_MASK; - - /* Page boundary */ - cfg_base = cfg_base & PAGE_MASK; - - /* - * To improve performance, if the current device is the same as - * the last device accessed, we don't touch the TLB. - */ - entryLo0 = (6 << 26) | (cfg_base >> 6) | (2 << 3) | 7; - entryLo1 = (6 << 26) | (cfg_base >> 6) | (0x1000 >> 6) | (2 << 3) | 7; - if ((entryLo0 != last_entryLo0) || (entryLo1 != last_entryLo1)) { - mod_wired_entry(pci_cfg_wired_entry, entryLo0, entryLo1, - (unsigned long)pci_cfg_vm->addr, PM_4K); - last_entryLo0 = entryLo0; - last_entryLo1 = entryLo1; - } - - if (access_type == PCI_ACCESS_WRITE) - au_writel(*data, (int)(pci_cfg_vm->addr + offset)); - else - *data = au_readl((int)(pci_cfg_vm->addr + offset)); - - au_sync_udelay(2); - - DBG("cfg_access %d bus->number %u dev %u at %x *data %x conf %lx\n", - access_type, bus->number, device, where, *data, offset); - - /* Check master abort */ - status = au_readl(Au1500_PCI_STATCMD); - - if (status & (1 << 29)) { - *data = 0xffffffff; - error = -1; - DBG("Au1x Master Abort\n"); - } else if ((status >> 28) & 0xf) { - DBG("PCI ERR detected: device %u, status %lx\n", - device, (status >> 28) & 0xf); - - /* Clear errors */ - au_writel(status & 0xf000ffff, Au1500_PCI_STATCMD); - - *data = 0xffffffff; - error = -1; - } - - /* Take away the IDSEL. */ - if (board_pci_idsel) - (void)board_pci_idsel(device, 0); - - local_irq_restore(flags); - return error; -#endif -} - -static int read_config_byte(struct pci_bus *bus, unsigned int devfn, - int where, u8 *val) -{ - u32 data; - int ret; - - ret = config_access(PCI_ACCESS_READ, bus, devfn, where, &data); - if (where & 1) - data >>= 8; - if (where & 2) - data >>= 16; - *val = data & 0xff; - return ret; -} - -static int read_config_word(struct pci_bus *bus, unsigned int devfn, - int where, u16 *val) -{ - u32 data; - int ret; - - ret = config_access(PCI_ACCESS_READ, bus, devfn, where, &data); - if (where & 2) - data >>= 16; - *val = data & 0xffff; - return ret; -} - -static int read_config_dword(struct pci_bus *bus, unsigned int devfn, - int where, u32 *val) -{ - int ret; - - ret = config_access(PCI_ACCESS_READ, bus, devfn, where, val); - return ret; -} - -static int write_config_byte(struct pci_bus *bus, unsigned int devfn, - int where, u8 val) -{ - u32 data = 0; - - if (config_access(PCI_ACCESS_READ, bus, devfn, where, &data)) - return -1; - - data = (data & ~(0xff << ((where & 3) << 3))) | - (val << ((where & 3) << 3)); - - if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data)) - return -1; - - return PCIBIOS_SUCCESSFUL; -} - -static int write_config_word(struct pci_bus *bus, unsigned int devfn, - int where, u16 val) -{ - u32 data = 0; - - if (config_access(PCI_ACCESS_READ, bus, devfn, where, &data)) - return -1; - - data = (data & ~(0xffff << ((where & 3) << 3))) | - (val << ((where & 3) << 3)); - - if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data)) - return -1; - - return PCIBIOS_SUCCESSFUL; -} - -static int write_config_dword(struct pci_bus *bus, unsigned int devfn, - int where, u32 val) -{ - if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &val)) - return -1; - - return PCIBIOS_SUCCESSFUL; -} - -static int config_read(struct pci_bus *bus, unsigned int devfn, - int where, int size, u32 *val) -{ - switch (size) { - case 1: { - u8 _val; - int rc = read_config_byte(bus, devfn, where, &_val); - - *val = _val; - return rc; - } - case 2: { - u16 _val; - int rc = read_config_word(bus, devfn, where, &_val); - - *val = _val; - return rc; - } - default: - return read_config_dword(bus, devfn, where, val); - } -} - -static int config_write(struct pci_bus *bus, unsigned int devfn, - int where, int size, u32 val) -{ - switch (size) { - case 1: - return write_config_byte(bus, devfn, where, (u8) val); - case 2: - return write_config_word(bus, devfn, where, (u16) val); - default: - return write_config_dword(bus, devfn, where, val); - } -} - -struct pci_ops au1x_pci_ops = { - config_read, - config_write -}; diff --git a/arch/mips/pci/pci-alchemy.c b/arch/mips/pci/pci-alchemy.c new file mode 100644 index 00000000000..4ee57104e47 --- /dev/null +++ b/arch/mips/pci/pci-alchemy.c @@ -0,0 +1,516 @@ +/* + * Alchemy PCI host mode support. + * + * Copyright 2001-2003, 2007-2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> + * + * Support for all devices (greater than 16) added by David Gathright. + */ + +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/platform_device.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/vmalloc.h> + +#include <asm/mach-au1x00/au1000.h> + +#ifdef CONFIG_DEBUG_PCI +#define DBG(x...) printk(KERN_DEBUG x) +#else +#define DBG(x...) do {} while (0) +#endif + +#define PCI_ACCESS_READ 0 +#define PCI_ACCESS_WRITE 1 + +struct alchemy_pci_context { + struct pci_controller alchemy_pci_ctrl; /* leave as first member! */ + void __iomem *regs; /* ctrl base */ + /* tools for wired entry for config space access */ + unsigned long last_elo0; + unsigned long last_elo1; + int wired_entry; + struct vm_struct *pci_cfg_vm; + + unsigned long pm[12]; + + int (*board_map_irq)(const struct pci_dev *d, u8 slot, u8 pin); + int (*board_pci_idsel)(unsigned int devsel, int assert); +}; + +/* IO/MEM resources for PCI. Keep the memres in sync with __fixup_bigphys_addr + * in arch/mips/alchemy/common/setup.c + */ +static struct resource alchemy_pci_def_memres = { + .start = ALCHEMY_PCI_MEMWIN_START, + .end = ALCHEMY_PCI_MEMWIN_END, + .name = "PCI memory space", + .flags = IORESOURCE_MEM +}; + +static struct resource alchemy_pci_def_iores = { + .start = ALCHEMY_PCI_IOWIN_START, + .end = ALCHEMY_PCI_IOWIN_END, + .name = "PCI IO space", + .flags = IORESOURCE_IO +}; + +static void mod_wired_entry(int entry, unsigned long entrylo0, + unsigned long entrylo1, unsigned long entryhi, + unsigned long pagemask) +{ + unsigned long old_pagemask; + unsigned long old_ctx; + + /* Save old context and create impossible VPN2 value */ + old_ctx = read_c0_entryhi() & 0xff; + old_pagemask = read_c0_pagemask(); + write_c0_index(entry); + write_c0_pagemask(pagemask); + write_c0_entryhi(entryhi); + write_c0_entrylo0(entrylo0); + write_c0_entrylo1(entrylo1); + tlb_write_indexed(); + write_c0_entryhi(old_ctx); + write_c0_pagemask(old_pagemask); +} + +static void alchemy_pci_wired_entry(struct alchemy_pci_context *ctx) +{ + ctx->wired_entry = read_c0_wired(); + add_wired_entry(0, 0, (unsigned long)ctx->pci_cfg_vm->addr, PM_4K); + ctx->last_elo0 = ctx->last_elo1 = ~0; +} + +static int config_access(unsigned char access_type, struct pci_bus *bus, + unsigned int dev_fn, unsigned char where, u32 *data) +{ + struct alchemy_pci_context *ctx = bus->sysdata; + unsigned int device = PCI_SLOT(dev_fn); + unsigned int function = PCI_FUNC(dev_fn); + unsigned long offset, status, cfg_base, flags, entryLo0, entryLo1, r; + int error = PCIBIOS_SUCCESSFUL; + + if (device > 19) { + *data = 0xffffffff; + return -1; + } + + /* YAMON on all db1xxx boards wipes the TLB and writes zero to C0_wired + * on resume, clearing our wired entry. Unfortunately the ->resume() + * callback is called way way way too late (and ->suspend() too early) + * to have them destroy and recreate it. Instead just test if c0_wired + * is now lower than the index we retrieved before suspending and then + * recreate the entry if necessary. Of course this is totally bonkers + * and breaks as soon as someone else adds another wired entry somewhere + * else. Anyone have any ideas how to handle this better? + */ + if (unlikely(read_c0_wired() < ctx->wired_entry)) + alchemy_pci_wired_entry(ctx); + + local_irq_save(flags); + r = __raw_readl(ctx->regs + PCI_REG_STATCMD) & 0x0000ffff; + r |= PCI_STATCMD_STATUS(0x2000); + __raw_writel(r, ctx->regs + PCI_REG_STATCMD); + wmb(); + + /* Allow board vendors to implement their own off-chip IDSEL. + * If it doesn't succeed, may as well bail out at this point. + */ + if (ctx->board_pci_idsel(device, 1) == 0) { + *data = 0xffffffff; + local_irq_restore(flags); + return -1; + } + + /* Setup the config window */ + if (bus->number == 0) + cfg_base = (1 << device) << 11; + else + cfg_base = 0x80000000 | (bus->number << 16) | (device << 11); + + /* Setup the lower bits of the 36-bit address */ + offset = (function << 8) | (where & ~0x3); + /* Pick up any address that falls below the page mask */ + offset |= cfg_base & ~PAGE_MASK; + + /* Page boundary */ + cfg_base = cfg_base & PAGE_MASK; + + /* To improve performance, if the current device is the same as + * the last device accessed, we don't touch the TLB. + */ + entryLo0 = (6 << 26) | (cfg_base >> 6) | (2 << 3) | 7; + entryLo1 = (6 << 26) | (cfg_base >> 6) | (0x1000 >> 6) | (2 << 3) | 7; + if ((entryLo0 != ctx->last_elo0) || (entryLo1 != ctx->last_elo1)) { + mod_wired_entry(ctx->wired_entry, entryLo0, entryLo1, + (unsigned long)ctx->pci_cfg_vm->addr, PM_4K); + ctx->last_elo0 = entryLo0; + ctx->last_elo1 = entryLo1; + } + + if (access_type == PCI_ACCESS_WRITE) + __raw_writel(*data, ctx->pci_cfg_vm->addr + offset); + else + *data = __raw_readl(ctx->pci_cfg_vm->addr + offset); + wmb(); + + DBG("alchemy-pci: cfg access %d bus %u dev %u at %x dat %x conf %lx\n", + access_type, bus->number, device, where, *data, offset); + + /* check for errors, master abort */ + status = __raw_readl(ctx->regs + PCI_REG_STATCMD); + if (status & (1 << 29)) { + *data = 0xffffffff; + error = -1; + DBG("alchemy-pci: master abort on cfg access %d bus %d dev %d", + access_type, bus->number, device); + } else if ((status >> 28) & 0xf) { + DBG("alchemy-pci: PCI ERR detected: dev %d, status %lx\n", + device, (status >> 28) & 0xf); + + /* clear errors */ + __raw_writel(status & 0xf000ffff, ctx->regs + PCI_REG_STATCMD); + + *data = 0xffffffff; + error = -1; + } + + /* Take away the IDSEL. */ + (void)ctx->board_pci_idsel(device, 0); + + local_irq_restore(flags); + return error; +} + +static int read_config_byte(struct pci_bus *bus, unsigned int devfn, + int where, u8 *val) +{ + u32 data; + int ret = config_access(PCI_ACCESS_READ, bus, devfn, where, &data); + + if (where & 1) + data >>= 8; + if (where & 2) + data >>= 16; + *val = data & 0xff; + return ret; +} + +static int read_config_word(struct pci_bus *bus, unsigned int devfn, + int where, u16 *val) +{ + u32 data; + int ret = config_access(PCI_ACCESS_READ, bus, devfn, where, &data); + + if (where & 2) + data >>= 16; + *val = data & 0xffff; + return ret; +} + +static int read_config_dword(struct pci_bus *bus, unsigned int devfn, + int where, u32 *val) +{ + return config_access(PCI_ACCESS_READ, bus, devfn, where, val); +} + +static int write_config_byte(struct pci_bus *bus, unsigned int devfn, + int where, u8 val) +{ + u32 data = 0; + + if (config_access(PCI_ACCESS_READ, bus, devfn, where, &data)) + return -1; + + data = (data & ~(0xff << ((where & 3) << 3))) | + (val << ((where & 3) << 3)); + + if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data)) + return -1; + + return PCIBIOS_SUCCESSFUL; +} + +static int write_config_word(struct pci_bus *bus, unsigned int devfn, + int where, u16 val) +{ + u32 data = 0; + + if (config_access(PCI_ACCESS_READ, bus, devfn, where, &data)) + return -1; + + data = (data & ~(0xffff << ((where & 3) << 3))) | + (val << ((where & 3) << 3)); + + if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data)) + return -1; + + return PCIBIOS_SUCCESSFUL; +} + +static int write_config_dword(struct pci_bus *bus, unsigned int devfn, + int where, u32 val) +{ + return config_access(PCI_ACCESS_WRITE, bus, devfn, where, &val); +} + +static int alchemy_pci_read(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 *val) +{ + switch (size) { + case 1: { + u8 _val; + int rc = read_config_byte(bus, devfn, where, &_val); + + *val = _val; + return rc; + } + case 2: { + u16 _val; + int rc = read_config_word(bus, devfn, where, &_val); + + *val = _val; + return rc; + } + default: + return read_config_dword(bus, devfn, where, val); + } +} + +static int alchemy_pci_write(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 val) +{ + switch (size) { + case 1: + return write_config_byte(bus, devfn, where, (u8) val); + case 2: + return write_config_word(bus, devfn, where, (u16) val); + default: + return write_config_dword(bus, devfn, where, val); + } +} + +static struct pci_ops alchemy_pci_ops = { + .read = alchemy_pci_read, + .write = alchemy_pci_write, +}; + +static int alchemy_pci_def_idsel(unsigned int devsel, int assert) +{ + return 1; /* success */ +} + +static int __devinit alchemy_pci_probe(struct platform_device *pdev) +{ + struct alchemy_pci_platdata *pd = pdev->dev.platform_data; + struct alchemy_pci_context *ctx; + void __iomem *virt_io; + unsigned long val; + struct resource *r; + int ret; + + /* need at least PCI IRQ mapping table */ + if (!pd) { + dev_err(&pdev->dev, "need platform data for PCI setup\n"); + ret = -ENODEV; + goto out; + } + + ctx = kzalloc(sizeof(*ctx), GFP_KERNEL); + if (!ctx) { + dev_err(&pdev->dev, "no memory for pcictl context\n"); + ret = -ENOMEM; + goto out; + } + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!r) { + dev_err(&pdev->dev, "no pcictl ctrl regs resource\n"); + ret = -ENODEV; + goto out1; + } + + if (!request_mem_region(r->start, resource_size(r), pdev->name)) { + dev_err(&pdev->dev, "cannot claim pci regs\n"); + ret = -ENODEV; + goto out1; + } + + ctx->regs = ioremap_nocache(r->start, resource_size(r)); + if (!ctx->regs) { + dev_err(&pdev->dev, "cannot map pci regs\n"); + ret = -ENODEV; + goto out2; + } + + /* map parts of the PCI IO area */ + /* REVISIT: if this changes with a newer variant (doubt it) make this + * a platform resource. + */ + virt_io = ioremap(AU1500_PCI_IO_PHYS_ADDR, 0x00100000); + if (!virt_io) { + dev_err(&pdev->dev, "cannot remap pci io space\n"); + ret = -ENODEV; + goto out3; + } + ctx->alchemy_pci_ctrl.io_map_base = (unsigned long)virt_io; + +#ifdef CONFIG_DMA_NONCOHERENT + /* Au1500 revisions older than AD have borked coherent PCI */ + if ((alchemy_get_cputype() == ALCHEMY_CPU_AU1500) && + (read_c0_prid() < 0x01030202)) { + val = __raw_readl(ctx->regs + PCI_REG_CONFIG); + val |= PCI_CONFIG_NC; + __raw_writel(val, ctx->regs + PCI_REG_CONFIG); + wmb(); + dev_info(&pdev->dev, "non-coherent PCI on Au1500 AA/AB/AC\n"); + } +#endif + + if (pd->board_map_irq) + ctx->board_map_irq = pd->board_map_irq; + + if (pd->board_pci_idsel) + ctx->board_pci_idsel = pd->board_pci_idsel; + else + ctx->board_pci_idsel = alchemy_pci_def_idsel; + + /* fill in relevant pci_controller members */ + ctx->alchemy_pci_ctrl.pci_ops = &alchemy_pci_ops; + ctx->alchemy_pci_ctrl.mem_resource = &alchemy_pci_def_memres; + ctx->alchemy_pci_ctrl.io_resource = &alchemy_pci_def_iores; + + /* we can't ioremap the entire pci config space because it's too large, + * nor can we dynamically ioremap it because some drivers use the + * PCI config routines from within atomic contex and that becomes a + * problem in get_vm_area(). Instead we use one wired TLB entry to + * handle all config accesses for all busses. + */ + ctx->pci_cfg_vm = get_vm_area(0x2000, VM_IOREMAP); + if (!ctx->pci_cfg_vm) { + dev_err(&pdev->dev, "unable to get vm area\n"); + ret = -ENOMEM; + goto out4; + } + ctx->wired_entry = 8192; /* impossibly high value */ + + set_io_port_base((unsigned long)ctx->alchemy_pci_ctrl.io_map_base); + + /* board may want to modify bits in the config register, do it now */ + val = __raw_readl(ctx->regs + PCI_REG_CONFIG); + val &= ~pd->pci_cfg_clr; + val |= pd->pci_cfg_set; + val &= ~PCI_CONFIG_PD; /* clear disable bit */ + __raw_writel(val, ctx->regs + PCI_REG_CONFIG); + wmb(); + + platform_set_drvdata(pdev, ctx); + register_pci_controller(&ctx->alchemy_pci_ctrl); + + return 0; + +out4: + iounmap(virt_io); +out3: + iounmap(ctx->regs); +out2: + release_mem_region(r->start, resource_size(r)); +out1: + kfree(ctx); +out: + return ret; +} + + +#ifdef CONFIG_PM +/* save PCI controller register contents. */ +static int alchemy_pci_suspend(struct device *dev) +{ + struct alchemy_pci_context *ctx = dev_get_drvdata(dev); + + ctx->pm[0] = __raw_readl(ctx->regs + PCI_REG_CMEM); + ctx->pm[1] = __raw_readl(ctx->regs + PCI_REG_CONFIG) & 0x0009ffff; + ctx->pm[2] = __raw_readl(ctx->regs + PCI_REG_B2BMASK_CCH); + ctx->pm[3] = __raw_readl(ctx->regs + PCI_REG_B2BBASE0_VID); + ctx->pm[4] = __raw_readl(ctx->regs + PCI_REG_B2BBASE1_SID); + ctx->pm[5] = __raw_readl(ctx->regs + PCI_REG_MWMASK_DEV); + ctx->pm[6] = __raw_readl(ctx->regs + PCI_REG_MWBASE_REV_CCL); + ctx->pm[7] = __raw_readl(ctx->regs + PCI_REG_ID); + ctx->pm[8] = __raw_readl(ctx->regs + PCI_REG_CLASSREV); + ctx->pm[9] = __raw_readl(ctx->regs + PCI_REG_PARAM); + ctx->pm[10] = __raw_readl(ctx->regs + PCI_REG_MBAR); + ctx->pm[11] = __raw_readl(ctx->regs + PCI_REG_TIMEOUT); + + return 0; +} + +static int alchemy_pci_resume(struct device *dev) +{ + struct alchemy_pci_context *ctx = dev_get_drvdata(dev); + + __raw_writel(ctx->pm[0], ctx->regs + PCI_REG_CMEM); + __raw_writel(ctx->pm[2], ctx->regs + PCI_REG_B2BMASK_CCH); + __raw_writel(ctx->pm[3], ctx->regs + PCI_REG_B2BBASE0_VID); + __raw_writel(ctx->pm[4], ctx->regs + PCI_REG_B2BBASE1_SID); + __raw_writel(ctx->pm[5], ctx->regs + PCI_REG_MWMASK_DEV); + __raw_writel(ctx->pm[6], ctx->regs + PCI_REG_MWBASE_REV_CCL); + __raw_writel(ctx->pm[7], ctx->regs + PCI_REG_ID); + __raw_writel(ctx->pm[8], ctx->regs + PCI_REG_CLASSREV); + __raw_writel(ctx->pm[9], ctx->regs + PCI_REG_PARAM); + __raw_writel(ctx->pm[10], ctx->regs + PCI_REG_MBAR); + __raw_writel(ctx->pm[11], ctx->regs + PCI_REG_TIMEOUT); + wmb(); + __raw_writel(ctx->pm[1], ctx->regs + PCI_REG_CONFIG); + wmb(); + + return 0; +} + +static const struct dev_pm_ops alchemy_pci_pmops = { + .suspend = alchemy_pci_suspend, + .resume = alchemy_pci_resume, +}; + +#define ALCHEMY_PCICTL_PM (&alchemy_pci_pmops) + +#else +#define ALCHEMY_PCICTL_PM NULL +#endif + +static struct platform_driver alchemy_pcictl_driver = { + .probe = alchemy_pci_probe, + .driver = { + .name = "alchemy-pci", + .owner = THIS_MODULE, + .pm = ALCHEMY_PCICTL_PM, + }, +}; + +static int __init alchemy_pci_init(void) +{ + /* Au1500/Au1550 have PCI */ + switch (alchemy_get_cputype()) { + case ALCHEMY_CPU_AU1500: + case ALCHEMY_CPU_AU1550: + return platform_driver_register(&alchemy_pcictl_driver); + } + return 0; +} +arch_initcall(alchemy_pci_init); + + +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + struct alchemy_pci_context *ctx = dev->sysdata; + if (ctx && ctx->board_map_irq) + return ctx->board_map_irq(dev, slot, pin); + return -1; +} + +int pcibios_plat_dev_init(struct pci_dev *dev) +{ + return 0; +} diff --git a/arch/mips/pmc-sierra/msp71xx/msp_setup.c b/arch/mips/pmc-sierra/msp71xx/msp_setup.c index 0abfbe04ffc..655308a4e1c 100644 --- a/arch/mips/pmc-sierra/msp71xx/msp_setup.c +++ b/arch/mips/pmc-sierra/msp71xx/msp_setup.c @@ -14,6 +14,7 @@ #include <asm/cacheflush.h> #include <asm/r4kcache.h> #include <asm/reboot.h> +#include <asm/smp-ops.h> #include <asm/time.h> #include <msp_prom.h> diff --git a/arch/mips/pmc-sierra/yosemite/py-console.c b/arch/mips/pmc-sierra/yosemite/py-console.c index 434d7b1a8c6..b7f1d9c4a8a 100644 --- a/arch/mips/pmc-sierra/yosemite/py-console.c +++ b/arch/mips/pmc-sierra/yosemite/py-console.c @@ -65,15 +65,11 @@ static unsigned char readb_outer_space(unsigned long long phys) __asm__ __volatile__ ( " .set mips3 \n" - " .set push \n" - " .set noreorder \n" - " .set nomacro \n" " ld %0, %1 \n" - " .set pop \n" " lbu %0, (%0) \n" " .set mips0 \n" : "=r" (res) - : "R" (vaddr)); + : "m" (vaddr)); write_c0_status(sr); ssnop_4(); @@ -93,15 +89,11 @@ static void writeb_outer_space(unsigned long long phys, unsigned char c) __asm__ __volatile__ ( " .set mips3 \n" - " .set push \n" - " .set noreorder \n" - " .set nomacro \n" " ld %0, %1 \n" - " .set pop \n" " sb %2, (%0) \n" " .set mips0 \n" : "=&r" (tmp) - : "R" (vaddr), "r" (c)); + : "m" (vaddr), "r" (c)); write_c0_status(sr); ssnop_4(); diff --git a/arch/mips/pnx8550/common/prom.c b/arch/mips/pnx8550/common/prom.c index 32f70097c3c..49639e8120d 100644 --- a/arch/mips/pnx8550/common/prom.c +++ b/arch/mips/pnx8550/common/prom.c @@ -30,7 +30,7 @@ typedef struct }t_env_var; -char * prom_getcmdline(void) +char * __init prom_getcmdline(void) { return &(arcs_cmdline[0]); } diff --git a/arch/mips/sgi-ip27/ip27-irq.c b/arch/mips/sgi-ip27/ip27-irq.c index b18b04e4857..f90dce315e0 100644 --- a/arch/mips/sgi-ip27/ip27-irq.c +++ b/arch/mips/sgi-ip27/ip27-irq.c @@ -337,12 +337,12 @@ static struct irq_chip bridge_irq_type = { .irq_unmask = enable_bridge_irq, }; -void __devinit register_bridge_irq(unsigned int irq) +void register_bridge_irq(unsigned int irq) { irq_set_chip_and_handler(irq, &bridge_irq_type, handle_level_irq); } -int __devinit request_bridge_irq(struct bridge_controller *bc) +int request_bridge_irq(struct bridge_controller *bc) { int irq = allocate_irqno(); int swlevel, cpu; |