summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/sh/Kconfig441
-rw-r--r--arch/sh/Kconfig.debug5
-rw-r--r--arch/sh/Makefile104
-rw-r--r--arch/sh/boards/dreamcast/setup.c3
-rw-r--r--arch/sh/boards/hp6xx/mach.c46
-rw-r--r--arch/sh/boards/hp6xx/setup.c3
-rw-r--r--arch/sh/boards/landisk/setup.c3
-rw-r--r--arch/sh/boards/lboxre2/setup.c3
-rw-r--r--arch/sh/boards/mpc1211/setup.c3
-rw-r--r--arch/sh/boards/renesas/edosk7705/setup.c3
-rw-r--r--arch/sh/boards/renesas/hs7751rvoip/setup.c3
-rw-r--r--arch/sh/boards/renesas/r7780rp/Kconfig6
-rw-r--r--arch/sh/boards/renesas/r7780rp/setup.c3
-rw-r--r--arch/sh/boards/renesas/rts7751r2d/setup.c3
-rw-r--r--arch/sh/boards/renesas/sh7710voipgw/setup.c3
-rw-r--r--arch/sh/boards/renesas/systemh/setup.c3
-rw-r--r--arch/sh/boards/saturn/Makefile8
-rw-r--r--arch/sh/boards/saturn/io.c26
-rw-r--r--arch/sh/boards/saturn/irq.c118
-rw-r--r--arch/sh/boards/saturn/setup.c31
-rw-r--r--arch/sh/boards/saturn/smp.c68
-rw-r--r--arch/sh/boards/se/7206/setup.c3
-rw-r--r--arch/sh/boards/se/7300/setup.c3
-rw-r--r--arch/sh/boards/se/73180/setup.c3
-rw-r--r--arch/sh/boards/se/7343/setup.c3
-rw-r--r--arch/sh/boards/se/7619/setup.c3
-rw-r--r--arch/sh/boards/se/770x/irq.c124
-rw-r--r--arch/sh/boards/se/770x/setup.c3
-rw-r--r--arch/sh/boards/se/7722/irq.c15
-rw-r--r--arch/sh/boards/se/7722/setup.c3
-rw-r--r--arch/sh/boards/se/7751/irq.c59
-rw-r--r--arch/sh/boards/se/7751/setup.c3
-rw-r--r--arch/sh/boards/se/7780/irq.c45
-rw-r--r--arch/sh/boards/se/7780/setup.c3
-rw-r--r--arch/sh/boards/sh03/setup.c31
-rw-r--r--arch/sh/boards/shmin/setup.c33
-rw-r--r--arch/sh/boards/snapgear/setup.c31
-rw-r--r--arch/sh/boards/superh/microdev/setup.c3
-rw-r--r--arch/sh/boards/titan/setup.c25
-rw-r--r--arch/sh/boards/unknown/Makefile6
-rw-r--r--arch/sh/boards/unknown/setup.c21
-rw-r--r--arch/sh/cchips/Kconfig6
-rw-r--r--arch/sh/configs/dreamcast_defconfig338
-rw-r--r--arch/sh/configs/r7780mp_defconfig1223
-rw-r--r--arch/sh/configs/r7785rp_defconfig296
-rw-r--r--arch/sh/configs/se7206_defconfig272
-rw-r--r--arch/sh/configs/se7619_defconfig215
-rw-r--r--arch/sh/configs/se7722_defconfig287
-rw-r--r--arch/sh/configs/shx3_defconfig756
-rw-r--r--arch/sh/drivers/dma/Kconfig17
-rw-r--r--arch/sh/drivers/pci/Kconfig1
-rw-r--r--arch/sh/kernel/Makefile9
-rw-r--r--arch/sh/kernel/cf-enabler.c6
-rw-r--r--arch/sh/kernel/cpu/init.c15
-rw-r--r--arch/sh/kernel/cpu/irq/intc2.c63
-rw-r--r--arch/sh/kernel/cpu/irq/ipr.c59
-rw-r--r--arch/sh/kernel/cpu/sh2/entry.S1
-rw-r--r--arch/sh/kernel/cpu/sh2/probe.c13
-rw-r--r--arch/sh/kernel/cpu/sh2/setup-sh7619.c24
-rw-r--r--arch/sh/kernel/cpu/sh2a/setup-sh7206.c24
-rw-r--r--arch/sh/kernel/cpu/sh3/entry.S19
-rw-r--r--arch/sh/kernel/cpu/sh3/setup-sh7705.c40
-rw-r--r--arch/sh/kernel/cpu/sh3/setup-sh7709.c112
-rw-r--r--arch/sh/kernel/cpu/sh3/setup-sh7710.c42
-rw-r--r--arch/sh/kernel/cpu/sh4/Makefile4
-rw-r--r--arch/sh/kernel/cpu/sh4/probe.c8
-rw-r--r--arch/sh/kernel/cpu/sh4/setup-sh7750.c58
-rw-r--r--arch/sh/kernel/cpu/sh4/setup-sh7760.c45
-rw-r--r--arch/sh/kernel/cpu/sh4a/Makefile2
-rw-r--r--arch/sh/kernel/cpu/sh4a/clock-shx3.c135
-rw-r--r--arch/sh/kernel/cpu/sh4a/setup-sh7722.c29
-rw-r--r--arch/sh/kernel/cpu/sh4a/setup-sh7780.c15
-rw-r--r--arch/sh/kernel/cpu/sh4a/setup-sh7785.c16
-rw-r--r--arch/sh/kernel/cpu/sh4a/setup-shx3.c85
-rw-r--r--arch/sh/kernel/irq.c8
-rw-r--r--arch/sh/kernel/machvec.c130
-rw-r--r--arch/sh/kernel/process.c18
-rw-r--r--arch/sh/kernel/ptrace.c8
-rw-r--r--arch/sh/kernel/setup.c210
-rw-r--r--arch/sh/kernel/sh_ksyms.c10
-rw-r--r--arch/sh/kernel/signal.c3
-rw-r--r--arch/sh/kernel/syscalls.S6
-rw-r--r--arch/sh/kernel/timers/timer-tmu.c7
-rw-r--r--arch/sh/kernel/topology.c49
-rw-r--r--arch/sh/kernel/traps.c5
-rw-r--r--arch/sh/kernel/vmlinux.lds.S20
-rw-r--r--arch/sh/lib/div64-generic.c9
-rw-r--r--arch/sh/lib/div64.S6
-rw-r--r--arch/sh/math-emu/math.c18
-rw-r--r--arch/sh/mm/Kconfig87
-rw-r--r--arch/sh/mm/Makefile5
-rw-r--r--arch/sh/mm/fault.c45
-rw-r--r--arch/sh/mm/init.c107
-rw-r--r--arch/sh/mm/numa.c92
-rw-r--r--arch/sh/mm/pg-dma.c95
-rw-r--r--arch/sh/tools/Makefile1
-rw-r--r--arch/sh/tools/mach-types2
97 files changed, 4124 insertions, 2358 deletions
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 038179ecf6a..d8ed6676ae8 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -55,8 +55,21 @@ config GENERIC_TIME
config GENERIC_CLOCKEVENTS
def_bool n
+config SYS_SUPPORTS_PM
+ bool
+
config SYS_SUPPORTS_APM_EMULATION
bool
+ select SYS_SUPPORTS_PM
+
+config SYS_SUPPORTS_SMP
+ bool
+
+config SYS_SUPPORTS_NUMA
+ bool
+
+config SYS_SUPPORTS_PCI
+ bool
config ARCH_MAY_HAVE_PC_FDC
bool
@@ -81,24 +94,146 @@ source "init/Kconfig"
menu "System type"
-config SOLUTION_ENGINE
- bool
+source "arch/sh/mm/Kconfig"
+
+menu "Processor features"
choice
- prompt "SuperH system type"
- default SH_UNKNOWN
+ prompt "Endianess selection"
+ default CPU_LITTLE_ENDIAN
+ help
+ Some SuperH machines can be configured for either little or big
+ endian byte order. These modes require different kernels.
+
+config CPU_LITTLE_ENDIAN
+ bool "Little Endian"
+
+config CPU_BIG_ENDIAN
+ bool "Big Endian"
+
+endchoice
+
+config SH_FPU
+ bool "FPU support"
+ depends on CPU_SH4
+ default y
+ help
+ Selecting this option will enable support for SH processors that
+ have FPU units (ie, SH77xx).
+
+ This option must be set in order to enable the FPU.
+
+config SH_FPU_EMU
+ bool "FPU emulation support"
+ depends on !SH_FPU && EXPERIMENTAL
+ default n
+ help
+ Selecting this option will enable support for software FPU emulation.
+ Most SH-3 users will want to say Y here, whereas most SH-4 users will
+ want to say N.
+
+config SH_DSP
+ bool "DSP support"
+ default y if SH4AL_DSP || !CPU_SH4
+ default n
+ help
+ Selecting this option will enable support for SH processors that
+ have DSP units (ie, SH2-DSP, SH3-DSP, and SH4AL-DSP).
+
+ This option must be set in order to enable the DSP.
+
+config SH_ADC
+ bool "ADC support"
+ depends on CPU_SH3
+ default y
+ help
+ Selecting this option will allow the Linux kernel to use SH3 on-chip
+ ADC module.
+
+ If unsure, say N.
+
+config SH_STORE_QUEUES
+ bool "Support for Store Queues"
+ depends on CPU_SH4
+ help
+ Selecting this option will enable an in-kernel API for manipulating
+ the store queues integrated in the SH-4 processors.
+
+config SPECULATIVE_EXECUTION
+ bool "Speculative subroutine return"
+ depends on CPU_SUBTYPE_SH7780 && EXPERIMENTAL
+ help
+ This enables support for a speculative instruction fetch for
+ subroutine return. There are various pitfalls associated with
+ this, as outlined in the SH7780 hardware manual.
+
+ If unsure, say N.
+
+config CPU_HAS_INTEVT
+ bool
+
+config CPU_HAS_PINT_IRQ
+ bool
+
+config CPU_HAS_MASKREG_IRQ
+ bool
+
+config CPU_HAS_INTC2_IRQ
+ bool
+
+config CPU_HAS_IPR_IRQ
+ bool
+
+config CPU_HAS_SR_RB
+ bool "CPU has SR.RB"
+ depends on CPU_SH3 || CPU_SH4
+ default y
+ help
+ This will enable the use of SR.RB register bank usage. Processors
+ that are lacking this bit must have another method in place for
+ accomplishing what is taken care of by the banked registers.
+
+ See <file:Documentation/sh/register-banks.txt> for further
+ information on SR.RB and register banking in the kernel in general.
+
+config CPU_HAS_PTEA
+ bool
+
+endmenu
+
+menu "Board support"
+
+config SOLUTION_ENGINE
+ bool
config SH_SOLUTION_ENGINE
bool "SolutionEngine"
select SOLUTION_ENGINE
+ depends on CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7750
help
Select SolutionEngine if configuring for a Hitachi SH7709
or SH7750 evaluation board.
+config SH_7206_SOLUTION_ENGINE
+ bool "SolutionEngine7206"
+ select SOLUTION_ENGINE
+ depends on CPU_SUBTYPE_SH7206
+ help
+ Select 7206 SolutionEngine if configuring for a Hitachi SH7206
+ evaluation board.
+
+config SH_7619_SOLUTION_ENGINE
+ bool "SolutionEngine7619"
+ select SOLUTION_ENGINE
+ depends on CPU_SUBTYPE_SH7619
+ help
+ Select 7619 SolutionEngine if configuring for a Hitachi SH7619
+ evaluation board.
+
config SH_7722_SOLUTION_ENGINE
bool "SolutionEngine7722"
select SOLUTION_ENGINE
- select CPU_SUBTYPE_SH7722
+ depends on CPU_SUBTYPE_SH7722
help
Select 7722 SolutionEngine if configuring for a Hitachi SH772
evaluation board.
@@ -106,7 +241,7 @@ config SH_7722_SOLUTION_ENGINE
config SH_7751_SOLUTION_ENGINE
bool "SolutionEngine7751"
select SOLUTION_ENGINE
- select CPU_SUBTYPE_SH7751
+ depends on CPU_SUBTYPE_SH7751
help
Select 7751 SolutionEngine if configuring for a Hitachi SH7751
evaluation board.
@@ -114,7 +249,8 @@ config SH_7751_SOLUTION_ENGINE
config SH_7780_SOLUTION_ENGINE
bool "SolutionEngine7780"
select SOLUTION_ENGINE
- select CPU_SUBTYPE_SH7780
+ select SYS_SUPPORTS_PCI
+ depends on CPU_SUBTYPE_SH7780
help
Select 7780 SolutionEngine if configuring for a Renesas SH7780
evaluation board.
@@ -122,7 +258,7 @@ config SH_7780_SOLUTION_ENGINE
config SH_7300_SOLUTION_ENGINE
bool "SolutionEngine7300"
select SOLUTION_ENGINE
- select CPU_SUBTYPE_SH7300
+ depends on CPU_SUBTYPE_SH7300
help
Select 7300 SolutionEngine if configuring for a Hitachi
SH7300(SH-Mobile V) evaluation board.
@@ -130,22 +266,22 @@ config SH_7300_SOLUTION_ENGINE
config SH_7343_SOLUTION_ENGINE
bool "SolutionEngine7343"
select SOLUTION_ENGINE
- select CPU_SUBTYPE_SH7343
+ depends on CPU_SUBTYPE_SH7343
help
Select 7343 SolutionEngine if configuring for a Hitachi
SH7343 (SH-Mobile 3AS) evaluation board.
config SH_73180_SOLUTION_ENGINE
- bool "SolutionEngine73180"
+ bool "SolutionEngine73180"
select SOLUTION_ENGINE
- select CPU_SUBTYPE_SH73180
+ depends on CPU_SUBTYPE_SH73180
help
Select 73180 SolutionEngine if configuring for a Hitachi
SH73180(SH-Mobile 3) evaluation board.
config SH_7751_SYSTEMH
bool "SystemH7751R"
- select CPU_SUBTYPE_SH7751R
+ depends on CPU_SUBTYPE_SH7751R
help
Select SystemH if you are configuring for a Renesas SystemH
7751R evaluation board.
@@ -153,20 +289,17 @@ config SH_7751_SYSTEMH
config SH_HP6XX
bool "HP6XX"
select SYS_SUPPORTS_APM_EMULATION
+ select HD6446X_SERIES
+ depends on CPU_SUBTYPE_SH7709
help
Select HP6XX if configuring for a HP jornada HP6xx.
More information (hardware only) at
<http://www.hp.com/jornada/>.
-config SH_SATURN
- bool "Saturn"
- select CPU_SUBTYPE_SH7604
- help
- Select Saturn if configuring for a SEGA Saturn.
-
config SH_DREAMCAST
bool "Dreamcast"
- select CPU_SUBTYPE_SH7091
+ select SYS_SUPPORTS_PCI
+ depends on CPU_SUBTYPE_SH7091
help
Select Dreamcast if configuring for a SEGA Dreamcast.
More information at
@@ -175,6 +308,7 @@ config SH_DREAMCAST
config SH_MPC1211
bool "Interface MPC1211"
+ depends on CPU_SUBTYPE_SH7751 && BROKEN
help
CTP/PCI-SH02 is a CPU module computer that is produced
by Interface Corporation.
@@ -182,6 +316,8 @@ config SH_MPC1211
config SH_SH03
bool "Interface CTP/PCI-SH03"
+ depends on CPU_SUBTYPE_SH7751 && BROKEN
+ select SYS_SUPPORTS_PCI
help
CTP/PCI-SH03 is a CPU module computer that is produced
by Interface Corporation.
@@ -189,7 +325,8 @@ config SH_SH03
config SH_SECUREEDGE5410
bool "SecureEdge5410"
- select CPU_SUBTYPE_SH7751R
+ depends on CPU_SUBTYPE_SH7751R
+ select SYS_SUPPORTS_PCI
help
Select SecureEdge5410 if configuring for a SnapGear SH board.
This includes both the OEM SecureEdge products as well as the
@@ -197,246 +334,76 @@ config SH_SECUREEDGE5410
config SH_HS7751RVOIP
bool "HS7751RVOIP"
- select CPU_SUBTYPE_SH7751R
+ depends on CPU_SUBTYPE_SH7751R
help
Select HS7751RVOIP if configuring for a Renesas Technology
Sales VoIP board.
config SH_7710VOIPGW
bool "SH7710-VOIP-GW"
- select CPU_SUBTYPE_SH7710
+ depends on CPU_SUBTYPE_SH7710
help
Select this option to build a kernel for the SH7710 based
VOIP GW.
config SH_RTS7751R2D
bool "RTS7751R2D"
- select CPU_SUBTYPE_SH7751R
+ depends on CPU_SUBTYPE_SH7751R
+ select SYS_SUPPORTS_PCI
help
Select RTS7751R2D if configuring for a Renesas Technology
Sales SH-Graphics board.
config SH_HIGHLANDER
bool "Highlander"
+ depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
+ select SYS_SUPPORTS_PCI
config SH_EDOSK7705
bool "EDOSK7705"
- select CPU_SUBTYPE_SH7705
+ depends on CPU_SUBTYPE_SH7705
config SH_SH4202_MICRODEV
bool "SH4-202 MicroDev"
- select CPU_SUBTYPE_SH4_202
+ depends on CPU_SUBTYPE_SH4_202
help
Select SH4-202 MicroDev if configuring for a SuperH MicroDev board
with an SH4-202 CPU.
config SH_LANDISK
bool "LANDISK"
- select CPU_SUBTYPE_SH7751R
+ depends on CPU_SUBTYPE_SH7751R
+ select SYS_SUPPORTS_PCI
help
I-O DATA DEVICE, INC. "LANDISK Series" support.
config SH_TITAN
bool "TITAN"
- select CPU_SUBTYPE_SH7751R
+ depends on CPU_SUBTYPE_SH7751R
+ select SYS_SUPPORTS_PCI
help
Select Titan if you are configuring for a Nimble Microsystems
NetEngine NP51R.
config SH_SHMIN
bool "SHMIN"
- select CPU_SUBTYPE_SH7706
+ depends on CPU_SUBTYPE_SH7706
help
Select SHMIN if configuring for the SHMIN board.
-config SH_7206_SOLUTION_ENGINE
- bool "SolutionEngine7206"
- select CPU_SUBTYPE_SH7206
- help
- Select 7206 SolutionEngine if configuring for a Hitachi SH7206
- evaluation board.
-
-config SH_7619_SOLUTION_ENGINE
- bool "SolutionEngine7619"
- select CPU_SUBTYPE_SH7619
- help
- Select 7619 SolutionEngine if configuring for a Hitachi SH7619
- evaluation board.
-
config SH_LBOX_RE2
bool "L-BOX RE2"
- select CPU_SUBTYPE_SH7751R
+ depends on CPU_SUBTYPE_SH7751R
+ select SYS_SUPPORTS_PCI
help
Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2.
-config SH_UNKNOWN
- bool "BareCPU"
- help
- "Bare CPU" aka "unknown" means an SH-based system which is not one
- of the specific ones mentioned above, which means you need to enter
- all sorts of stuff like CONFIG_MEMORY_START because the config
- system doesn't already know what it is. You get a machine vector
- without any platform-specific code in it, so things like the RTC may
- not work.
-
- This option is for the early stages of porting to a new machine.
-
-endchoice
+endmenu
source "arch/sh/boards/renesas/hs7751rvoip/Kconfig"
source "arch/sh/boards/renesas/rts7751r2d/Kconfig"
source "arch/sh/boards/renesas/r7780rp/Kconfig"
-source "arch/sh/mm/Kconfig"
-
-config CF_ENABLER
- bool "Compact Flash Enabler support"
- depends on SH_SOLUTION_ENGINE || SH_UNKNOWN || SH_SH03
- ---help---
- Compact Flash is a small, removable mass storage device introduced
- in 1994 originally as a PCMCIA device. If you say `Y' here, you
- compile in support for Compact Flash devices directly connected to
- a SuperH processor. A Compact Flash FAQ is available at
- <http://www.compactflash.org/faqs/faq.htm>.
-
- If your board has "Directly Connected" CompactFlash at area 5 or 6,
- you may want to enable this option. Then, you can use CF as
- primary IDE drive (only tested for SanDisk).
-
- If in doubt, select 'N'.
-
-choice
- prompt "Compact Flash Connection Area"
- depends on CF_ENABLER
- default CF_AREA6
-
-config CF_AREA5
- bool "Area5"
- help
- If your board has "Directly Connected" CompactFlash, You should
- select the area where your CF is connected to.
-
- - "Area5" if CompactFlash is connected to Area 5 (0x14000000)
- - "Area6" if it is connected to Area 6 (0x18000000)
-
- "Area6" will work for most boards.
-
-config CF_AREA6
- bool "Area6"
-
-endchoice
-
-config CF_BASE_ADDR
- hex
- depends on CF_ENABLER
- default "0xb8000000" if CF_AREA6
- default "0xb4000000" if CF_AREA5
-
-menu "Processor features"
-
-choice
- prompt "Endianess selection"
- default CPU_LITTLE_ENDIAN
- help
- Some SuperH machines can be configured for either little or big
- endian byte order. These modes require different kernels.
-
-config CPU_LITTLE_ENDIAN
- bool "Little Endian"
-
-config CPU_BIG_ENDIAN
- bool "Big Endian"
-
-endchoice
-
-config SH_FPU
- bool "FPU support"
- depends on !CPU_SH3
- default y
- help
- Selecting this option will enable support for SH processors that
- have FPU units (ie, SH77xx).
-
- This option must be set in order to enable the FPU.
-
-config SH_FPU_EMU
- bool "FPU emulation support"
- depends on !SH_FPU && EXPERIMENTAL
- default n
- help
- Selecting this option will enable support for software FPU emulation.
- Most SH-3 users will want to say Y here, whereas most SH-4 users will
- want to say N.
-
-config SH_DSP
- bool "DSP support"
- default y if SH4AL_DSP || !CPU_SH4
- default n
- help
- Selecting this option will enable support for SH processors that
- have DSP units (ie, SH2-DSP, SH3-DSP, and SH4AL-DSP).
-
- This option must be set in order to enable the DSP.
-
-config SH_ADC
- bool "ADC support"
- depends on CPU_SH3
- default y
- help
- Selecting this option will allow the Linux kernel to use SH3 on-chip
- ADC module.
-
- If unsure, say N.
-
-config SH_STORE_QUEUES
- bool "Support for Store Queues"
- depends on CPU_SH4
- help
- Selecting this option will enable an in-kernel API for manipulating
- the store queues integrated in the SH-4 processors.
-
-config SPECULATIVE_EXECUTION
- bool "Speculative subroutine return"
- depends on CPU_SUBTYPE_SH7780 && EXPERIMENTAL
- help
- This enables support for a speculative instruction fetch for
- subroutine return. There are various pitfalls associated with
- this, as outlined in the SH7780 hardware manual.
-
- If unsure, say N.
-
-config CPU_HAS_INTEVT
- bool
-
-config CPU_HAS_PINT_IRQ
- bool
-
-config CPU_HAS_MASKREG_IRQ
- bool
-
-config CPU_HAS_INTC2_IRQ
- bool
-
-config CPU_HAS_IPR_IRQ
- bool
-
-config CPU_HAS_SR_RB
- bool "CPU has SR.RB"
- depends on CPU_SH3 || CPU_SH4
- default y
- help
- This will enable the use of SR.RB register bank usage. Processors
- that are lacking this bit must have another method in place for
- accomplishing what is taken care of by the banked registers.
-
- See <file:Documentation/sh/register-banks.txt> for further
- information on SR.RB and register banking in the kernel in general.
-
-config CPU_HAS_PTEA
- bool
-
-endmenu
-
menu "Timer and clock configuration"
config SH_TMU
@@ -473,13 +440,13 @@ config SH_PCLK_FREQ
int "Peripheral clock frequency (in Hz)"
default "27000000" if CPU_SUBTYPE_SH73180 || CPU_SUBTYPE_SH7343
default "31250000" if CPU_SUBTYPE_SH7619
+ default "32000000" if CPU_SUBTYPE_SH7722
default "33333333" if CPU_SUBTYPE_SH7300 || CPU_SUBTYPE_SH7770 || \
CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7705 || \
CPU_SUBTYPE_SH7206
- default "50000000" if CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7780 || \
- CPU_SUBTYPE_SH7785
- default "60000000" if CPU_SUBTYPE_SH7751
+ default "60000000" if CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7751R
default "66000000" if CPU_SUBTYPE_SH4_202
+ default "50000000"
help
This option is used to specify the peripheral clock frequency.
This is necessary for determining the reference clock value on
@@ -487,8 +454,10 @@ config SH_PCLK_FREQ
config SH_CLK_MD
int "CPU Mode Pin Setting"
- default 0
depends on CPU_SUBTYPE_SH7619 || CPU_SUBTYPE_SH7206
+ default 6 if CPU_SUBTYPE_SH7206
+ default 5 if CPU_SUBTYPE_SH7619
+ default 0
help
MD2 - MD0 pin setting.
@@ -560,6 +529,7 @@ config CRASH_DUMP
config SMP
bool "Symmetric multi-processing support"
+ depends on SYS_SUPPORTS_SMP
---help---
This enables support for systems with more than one CPU. If you have
a system with only one CPU, like most personal computers, say N. If
@@ -584,6 +554,7 @@ config NR_CPUS
int "Maximum number of CPUs (2-32)"
range 2 32
depends on SMP
+ default "4" if CPU_SHX3
default "2"
help
This allows you to specify the maximum number of CPUs which this
@@ -623,6 +594,7 @@ config BOOT_LINK_OFFSET
config UBC_WAKEUP
bool "Wakeup UBC on startup"
+ depends on CPU_SH4
help
Selecting this option will wakeup the User Break Controller (UBC) on
startup. Although the UBC is left in an awake state when the processor
@@ -651,8 +623,8 @@ menu "Bus options"
# we're not using PCMCIA, so we make it dependent on
# PCMCIA outright. -- PFM.
config ISA
- bool
- default y if PCMCIA
+ def_bool y
+ depends on PCMCIA && HD6446X_SERIES
help
Find out whether you have ISA slots on your motherboard. ISA is the
name of a bus system, i.e. the way the CPU talks to the other stuff
@@ -690,6 +662,49 @@ config SUPERHYWAY
tristate "SuperHyway Bus support"
depends on CPU_SUBTYPE_SH4_202
+config CF_ENABLER
+ bool "Compact Flash Enabler support"
+ depends on SOLUTION_ENGINE || SH_SH03
+ ---help---
+ Compact Flash is a small, removable mass storage device introduced
+ in 1994 originally as a PCMCIA device. If you say `Y' here, you
+ compile in support for Compact Flash devices directly connected to
+ a SuperH processor. A Compact Flash FAQ is available at
+ <http://www.compactflash.org/faqs/faq.htm>.
+
+ If your board has "Directly Connected" CompactFlash at area 5 or 6,
+ you may want to enable this option. Then, you can use CF as
+ primary IDE drive (only tested for SanDisk).
+
+ If in doubt, select 'N'.
+
+choice
+ prompt "Compact Flash Connection Area"
+ depends on CF_ENABLER
+ default CF_AREA6
+
+config CF_AREA5
+ bool "Area5"
+ help
+ If your board has "Directly Connected" CompactFlash, You should
+ select the area where your CF is connected to.
+
+ - "Area5" if CompactFlash is connected to Area 5 (0x14000000)
+ - "Area6" if it is connected to Area 6 (0x18000000)
+
+ "Area6" will work for most boards.
+
+config CF_AREA6
+ bool "Area6"
+
+endchoice
+
+config CF_BASE_ADDR
+ hex
+ depends on CF_ENABLER
+ default "0xb8000000" if CF_AREA6
+ default "0xb4000000" if CF_AREA5
+
source "arch/sh/drivers/pci/Kconfig"
source "drivers/pci/Kconfig"
@@ -707,7 +722,7 @@ source "fs/Kconfig.binfmt"
endmenu
menu "Power management options (EXPERIMENTAL)"
-depends on EXPERIMENTAL
+depends on EXPERIMENTAL && SYS_SUPPORTS_PM
source kernel/power/Kconfig
diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index b56307294b6..52f6a99c8ec 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -52,6 +52,10 @@ config EARLY_PRINTK
select both the EARLY_SCIF_CONSOLE and SH_STANDARD_BIOS, using
the kernel command line option to toggle back and forth.
+config DEBUG_BOOTMEM
+ depends on DEBUG_KERNEL
+ bool "Debug BOOTMEM initialization"
+
config DEBUG_STACKOVERFLOW
bool "Check for stack overflows"
depends on DEBUG_KERNEL
@@ -82,6 +86,7 @@ config SH_KGDB
bool "Include KGDB kernel debugger"
select FRAME_POINTER
select DEBUG_INFO
+ depends on CPU_SH3 || CPU_SH4
help
Include in-kernel hooks for kgdb, the Linux kernel source level
debugger. See <http://kgdb.sourceforge.net/> for more information.
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index 883b03b040c..77fecc62a05 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -34,20 +34,20 @@ isa-y := $(isa-y)-nofpu
endif
endif
-cflags-$(CONFIG_CPU_SH2) := -m2
-cflags-$(CONFIG_CPU_SH2A) := -m2a $(call cc-option,-m2a-nofpu,)
-cflags-$(CONFIG_CPU_SH3) := -m3
-cflags-$(CONFIG_CPU_SH4) := -m4 \
+cflags-$(CONFIG_CPU_SH2) := $(call cc-option,-m2,)
+cflags-$(CONFIG_CPU_SH2A) += $(call cc-option,-m2a,) \
+ $(call cc-option,-m2a-nofpu,)
+cflags-$(CONFIG_CPU_SH3) := $(call cc-option,-m3,)
+cflags-$(CONFIG_CPU_SH4) := $(call cc-option,-m4,) \
$(call cc-option,-mno-implicit-fp,-m4-nofpu)
-cflags-$(CONFIG_CPU_SH4A) := $(call cc-option,-m4a,) $(call cc-option,-m4a-nofpu,)
+cflags-$(CONFIG_CPU_SH4A) += $(call cc-option,-m4a,) \
+ $(call cc-option,-m4a-nofpu,)
cflags-$(CONFIG_CPU_BIG_ENDIAN) += -mb
cflags-$(CONFIG_CPU_LITTLE_ENDIAN) += -ml
cflags-y += $(call as-option,-Wa$(comma)-isa=$(isa-y),) -ffreestanding
-cflags-$(CONFIG_SH_DSP) += -Wa,-dsp
-
cflags-$(CONFIG_MORE_COMPILE_OPTIONS) += \
$(shell echo $(CONFIG_COMPILE_OPTIONS) | sed -e 's/"//g')
@@ -87,39 +87,37 @@ core-y += arch/sh/kernel/ arch/sh/mm/
core-$(CONFIG_SH_FPU_EMU) += arch/sh/math-emu/
# Boards
-machdir-$(CONFIG_SH_SOLUTION_ENGINE) := se/770x
-machdir-$(CONFIG_SH_7722_SOLUTION_ENGINE) := se/7722
-machdir-$(CONFIG_SH_7751_SOLUTION_ENGINE) := se/7751
-machdir-$(CONFIG_SH_7780_SOLUTION_ENGINE) := se/7780
-machdir-$(CONFIG_SH_7300_SOLUTION_ENGINE) := se/7300
-machdir-$(CONFIG_SH_7343_SOLUTION_ENGINE) := se/7343
-machdir-$(CONFIG_SH_73180_SOLUTION_ENGINE) := se/73180
-machdir-$(CONFIG_SH_HP6XX) := hp6xx
-machdir-$(CONFIG_SH_SATURN) := saturn
-machdir-$(CONFIG_SH_DREAMCAST) := dreamcast
-machdir-$(CONFIG_SH_MPC1211) := mpc1211
-machdir-$(CONFIG_SH_SH03) := sh03
-machdir-$(CONFIG_SH_SECUREEDGE5410) := snapgear
-machdir-$(CONFIG_SH_HS7751RVOIP) := renesas/hs7751rvoip
-machdir-$(CONFIG_SH_RTS7751R2D) := renesas/rts7751r2d
-machdir-$(CONFIG_SH_7751_SYSTEMH) := renesas/systemh
-machdir-$(CONFIG_SH_EDOSK7705) := renesas/edosk7705
-machdir-$(CONFIG_SH_HIGHLANDER) := renesas/r7780rp
-machdir-$(CONFIG_SH_7710VOIPGW) := renesas/sh7710voipgw
-machdir-$(CONFIG_SH_SH4202_MICRODEV) := superh/microdev
-machdir-$(CONFIG_SH_LANDISK) := landisk
-machdir-$(CONFIG_SH_TITAN) := titan
-machdir-$(CONFIG_SH_SHMIN) := shmin
-machdir-$(CONFIG_SH_7206_SOLUTION_ENGINE) := se/7206
-machdir-$(CONFIG_SH_7619_SOLUTION_ENGINE) := se/7619
-machdir-$(CONFIG_SH_LBOX_RE2) := lboxre2
-machdir-$(CONFIG_SH_UNKNOWN) := unknown
-
-incdir-y := $(notdir $(machdir-y))
-incdir-$(CONFIG_SH_HP6XX) := hp6xx
+machdir-$(CONFIG_SH_SOLUTION_ENGINE) += se/770x
+machdir-$(CONFIG_SH_7722_SOLUTION_ENGINE) += se/7722
+machdir-$(CONFIG_SH_7751_SOLUTION_ENGINE) += se/7751
+machdir-$(CONFIG_SH_7780_SOLUTION_ENGINE) += se/7780
+machdir-$(CONFIG_SH_7300_SOLUTION_ENGINE) += se/7300
+machdir-$(CONFIG_SH_7343_SOLUTION_ENGINE) += se/7343
+machdir-$(CONFIG_SH_73180_SOLUTION_ENGINE) += se/73180
+machdir-$(CONFIG_SH_HP6XX) += hp6xx
+machdir-$(CONFIG_SH_DREAMCAST) += dreamcast
+machdir-$(CONFIG_SH_MPC1211) += mpc1211
+machdir-$(CONFIG_SH_SH03) += sh03
+machdir-$(CONFIG_SH_SECUREEDGE5410) += snapgear
+machdir-$(CONFIG_SH_HS7751RVOIP) += renesas/hs7751rvoip
+machdir-$(CONFIG_SH_RTS7751R2D) += renesas/rts7751r2d
+machdir-$(CONFIG_SH_7751_SYSTEMH) += renesas/systemh
+machdir-$(CONFIG_SH_EDOSK7705) += renesas/edosk7705
+machdir-$(CONFIG_SH_HIGHLANDER) += renesas/r7780rp
+machdir-$(CONFIG_SH_7710VOIPGW) += renesas/sh7710voipgw
+machdir-$(CONFIG_SH_SH4202_MICRODEV) += superh/microdev
+machdir-$(CONFIG_SH_LANDISK) += landisk
+machdir-$(CONFIG_SH_TITAN) += titan
+machdir-$(CONFIG_SH_SHMIN) += shmin
+machdir-$(CONFIG_SH_7206_SOLUTION_ENGINE) += se/7206
+machdir-$(CONFIG_SH_7619_SOLUTION_ENGINE) += se/7619
+machdir-$(CONFIG_SH_LBOX_RE2) += lboxre2
+
+incdir-y := $(notdir $(machdir-y))
ifneq ($(machdir-y),)
-core-y += arch/sh/boards/$(machdir-y)/
+core-y += $(addprefix arch/sh/boards/, \
+ $(filter-out ., $(patsubst %,%/,$(machdir-y))))
endif
# Companion chips
@@ -157,19 +155,31 @@ include/asm-sh/.cpu: $(wildcard include/config/cpu/*.h) \
# Most boards have their own mach directories. For the ones that
# don't, just reference the parent directory so the semantics are
# kept roughly the same.
+#
+# When multiple boards are compiled in at the same time, preference
+# for the mach link is given to whichever has a directory for its
+# headers. However, this is only a workaround until platforms that
+# can live in the same kernel image back away from relying on the
+# mach link.
include/asm-sh/.mach: $(wildcard include/config/sh/*.h) \
include/config/auto.conf FORCE
- @echo -n ' SYMLINK include/asm-sh/mach -> '
$(Q)if [ ! -d include/asm-sh ]; then mkdir -p include/asm-sh; fi
- $(Q)if [ -d $(incdir-prefix)$(incdir-y) ]; then \
- echo -e 'include/asm-sh/$(incdir-y)'; \
- ln -fsn $(incdir-prefix)$(incdir-y) \
+ $(Q)rm -f include/asm-sh/mach
+ $(Q)for i in $(incdir-y); do \
+ if [ -d $(incdir-prefix)$$i ]; then \
+ echo -n ' SYMLINK include/asm-sh/mach -> '; \
+ echo -e "include/asm-sh/$$i"; \
+ ln -fsn $(incdir-prefix)$$i \
include/asm-sh/mach; \
else \
- echo -e 'include/asm-sh'; \
- ln -fsn $(incdir-prefix) include/asm-sh/mach; \
- fi
+ if [ ! -d include/asm-sh/mach ]; then \
+ echo -n ' SYMLINK include/asm-sh/mach -> '; \
+ echo -e 'include/asm-sh'; \
+ ln -fsn $(incdir-prefix) include/asm-sh/mach; \
+ fi; \
+ fi; \
+ done
@touch $@
archprepare: include/asm-sh/.cpu include/asm-sh/.mach maketools
@@ -188,7 +198,9 @@ compressed: zImage
archclean:
$(Q)$(MAKE) $(clean)=$(boot)
-CLEAN_FILES += include/asm-sh/machtypes.h
+CLEAN_FILES += include/asm-sh/machtypes.h \
+ include/asm-sh/cpu include/asm-sh/.cpu \
+ include/asm-sh/mach include/asm-sh/.mach
define archhelp
@echo '* zImage - Compressed kernel image'
diff --git a/arch/sh/boards/dreamcast/setup.c b/arch/sh/boards/dreamcast/setup.c
index f13017eeeb2..8799df6e866 100644
--- a/arch/sh/boards/dreamcast/setup.c
+++ b/arch/sh/boards/dreamcast/setup.c
@@ -60,7 +60,7 @@ static void __init dreamcast_setup(char **cmdline_p)
#endif
}
-struct sh_machine_vector mv_dreamcast __initmv = {
+static struct sh_machine_vector mv_dreamcast __initmv = {
.mv_name = "Sega Dreamcast",
.mv_setup = dreamcast_setup,
.mv_irq_demux = systemasic_irq_demux,
@@ -70,4 +70,3 @@ struct sh_machine_vector mv_dreamcast __initmv = {
.mv_consistent_free = dreamcast_consistent_free,
#endif
};
-ALIAS_MV(dreamcast)
diff --git a/arch/sh/boards/hp6xx/mach.c b/arch/sh/boards/hp6xx/mach.c
deleted file mode 100644
index 08dbba910f7..00000000000
--- a/arch/sh/boards/hp6xx/mach.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * linux/arch/sh/boards/hp6xx/mach.c
- *
- * Copyright (C) 2000 Stuart Menefy (stuart.menefy@st.com)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * Machine vector for the HP680
- */
-#include <asm/machvec.h>
-#include <asm/hd64461.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-
-struct sh_machine_vector mv_hp6xx __initmv = {
- .mv_nr_irqs = HD64461_IRQBASE + HD64461_IRQ_NUM,
-
- .mv_inb = hd64461_inb,
- .mv_inw = hd64461_inw,
- .mv_inl = hd64461_inl,
- .mv_outb = hd64461_outb,
- .mv_outw = hd64461_outw,
- .mv_outl = hd64461_outl,
-
- .mv_inb_p = hd64461_inb_p,
- .mv_inw_p = hd64461_inw,
- .mv_inl_p = hd64461_inl,
- .mv_outb_p = hd64461_outb_p,
- .mv_outw_p = hd64461_outw,
- .mv_outl_p = hd64461_outl,
-
- .mv_insb = hd64461_insb,
- .mv_insw = hd64461_insw,
- .mv_insl = hd64461_insl,
- .mv_outsb = hd64461_outsb,
- .mv_outsw = hd64461_outsw,
- .mv_outsl = hd64461_outsl,
-
- .mv_readw = hd64461_readw,
- .mv_writew = hd64461_writew,
-
- .mv_irq_demux = hd64461_irq_demux,
-};
-
-ALIAS_MV(hp6xx)
diff --git a/arch/sh/boards/hp6xx/setup.c b/arch/sh/boards/hp6xx/setup.c
index 6aeee85c978..7ae708930ba 100644
--- a/arch/sh/boards/hp6xx/setup.c
+++ b/arch/sh/boards/hp6xx/setup.c
@@ -98,10 +98,9 @@ static void __init hp6xx_setup(char **cmdline_p)
}
device_initcall(hp6xx_devices_setup);
-struct sh_machine_vector mv_hp6xx __initmv = {
+static struct sh_machine_vector mv_hp6xx __initmv = {
.mv_name = "hp6xx",
.mv_setup = hp6xx_setup,
.mv_nr_irqs = HD64461_IRQBASE + HD64461_IRQ_NUM,
.mv_irq_demux = hd64461_irq_demux,
};
-ALIAS_MV(hp6xx)
diff --git a/arch/sh/boards/landisk/setup.c b/arch/sh/boards/landisk/setup.c
index f953c742776..eda71763ecc 100644
--- a/arch/sh/boards/landisk/setup.c
+++ b/arch/sh/boards/landisk/setup.c
@@ -97,10 +97,9 @@ static void __init landisk_setup(char **cmdline_p)
/*
* The Machine Vector
*/
-struct sh_machine_vector mv_landisk __initmv = {
+static struct sh_machine_vector mv_landisk __initmv = {
.mv_name = "LANDISK",
.mv_nr_irqs = 72,
.mv_setup = landisk_setup,
.mv_init_irq = init_landisk_IRQ,
};
-ALIAS_MV(landisk)
diff --git a/arch/sh/boards/lboxre2/setup.c b/arch/sh/boards/lboxre2/setup.c
index 4e20f7c63bf..9c830fdc411 100644
--- a/arch/sh/boards/lboxre2/setup.c
+++ b/arch/sh/boards/lboxre2/setup.c
@@ -77,9 +77,8 @@ device_initcall(lboxre2_devices_setup);
/*
* The Machine Vector
*/
-struct sh_machine_vector mv_lboxre2 __initmv = {
+static struct sh_machine_vector mv_lboxre2 __initmv = {
.mv_name = "L-BOX RE2",
.mv_nr_irqs = 72,
.mv_init_irq = init_lboxre2_IRQ,
};
-ALIAS_MV(lboxre2)
diff --git a/arch/sh/boards/mpc1211/setup.c b/arch/sh/boards/mpc1211/setup.c
index 1a0604b23ce..8ce03e00b0a 100644
--- a/arch/sh/boards/mpc1211/setup.c
+++ b/arch/sh/boards/mpc1211/setup.c
@@ -338,11 +338,10 @@ static void __init mpc1211_setup(char **cmdline_p)
/*
* The Machine Vector
*/
-struct sh_machine_vector mv_mpc1211 __initmv = {
+static struct sh_machine_vector mv_mpc1211 __initmv = {
.mv_name = "Interface MPC-1211(CTP/PCI/MPC-SH02)",
.mv_setup = mpc1211_setup,
.mv_nr_irqs = 48,
.mv_irq_demux = mpc1211_irq_demux,
.mv_init_irq = init_mpc1211_IRQ,
};
-ALIAS_MV(mpc1211)
diff --git a/arch/sh/boards/renesas/edosk7705/setup.c b/arch/sh/boards/renesas/edosk7705/setup.c
index ec5be010771..f076c45308d 100644
--- a/arch/sh/boards/renesas/edosk7705/setup.c
+++ b/arch/sh/boards/renesas/edosk7705/setup.c
@@ -21,7 +21,7 @@ static void __init sh_edosk7705_init_irq(void)
/*
* The Machine Vector
*/
-struct sh_machine_vector mv_edosk7705 __initmv = {
+static struct sh_machine_vector mv_edosk7705 __initmv = {
.mv_name = "EDOSK7705",
.mv_nr_irqs = 80,
@@ -41,4 +41,3 @@ struct sh_machine_vector mv_edosk7705 __initmv = {
.mv_isa_port2addr = sh_edosk7705_isa_port2addr,
.mv_init_irq = sh_edosk7705_init_irq,
};
-ALIAS_MV(edosk7705)
diff --git a/arch/sh/boards/renesas/hs7751rvoip/setup.c b/arch/sh/boards/renesas/hs7751rvoip/setup.c
index f7d0e304d89..fa5fa392022 100644
--- a/arch/sh/boards/renesas/hs7751rvoip/setup.c
+++ b/arch/sh/boards/renesas/hs7751rvoip/setup.c
@@ -89,7 +89,7 @@ static void __init hs7751rvoip_setup(char **cmdline_p)
printk(KERN_INFO "Renesas Technology Sales HS7751RVoIP-2 support.\n");
}
-struct sh_machine_vector mv_hs7751rvoip __initmv = {
+static struct sh_machine_vector mv_hs7751rvoip __initmv = {
.mv_name = "HS7751RVoIP",
.mv_setup = hs7751rvoip_setup,
.mv_nr_irqs = 72,
@@ -118,4 +118,3 @@ struct sh_machine_vector mv_hs7751rvoip __initmv = {
.mv_init_irq = hs7751rvoip_init_irq,
.mv_ioport_map = hs7751rvoip_ioport_map,
};
-ALIAS_MV(hs7751rvoip)
diff --git a/arch/sh/boards/renesas/r7780rp/Kconfig b/arch/sh/boards/renesas/r7780rp/Kconfig
index 9fb11641fe1..fc8f28e04ba 100644
--- a/arch/sh/boards/renesas/r7780rp/Kconfig
+++ b/arch/sh/boards/renesas/r7780rp/Kconfig
@@ -6,18 +6,18 @@ choice
config SH_R7780RP
bool "R7780RP-1 board support"
- select CPU_SUBTYPE_SH7780
+ depends on CPU_SUBTYPE_SH7780
config SH_R7780MP
bool "R7780MP board support"
- select CPU_SUBTYPE_SH7780
+ depends on CPU_SUBTYPE_SH7780
help
Selecting this option will enable support for the mass-production
version of the R7780RP. If in doubt, say Y.
config SH_R7785RP
bool "R7785RP board support"
- select CPU_SUBTYPE_SH7785
+ depends on CPU_SUBTYPE_SH7785
endchoice
diff --git a/arch/sh/boards/renesas/r7780rp/setup.c b/arch/sh/boards/renesas/r7780rp/setup.c
index 0727ef92f2b..5afb864a1ec 100644
--- a/arch/sh/boards/renesas/r7780rp/setup.c
+++ b/arch/sh/boards/renesas/r7780rp/setup.c
@@ -166,10 +166,9 @@ static void __init highlander_setup(char **cmdline_p)
/*
* The Machine Vector
*/
-struct sh_machine_vector mv_highlander __initmv = {
+static struct sh_machine_vector mv_highlander __initmv = {
.mv_name = "Highlander",
.mv_nr_irqs = 109,
.mv_setup = highlander_setup,
.mv_init_irq = highlander_init_irq,
};
-ALIAS_MV(highlander)
diff --git a/arch/sh/boards/renesas/rts7751r2d/setup.c b/arch/sh/boards/renesas/rts7751r2d/setup.c
index 593f26a85e9..656fda30ef7 100644
--- a/arch/sh/boards/renesas/rts7751r2d/setup.c
+++ b/arch/sh/boards/renesas/rts7751r2d/setup.c
@@ -176,7 +176,7 @@ static void __init rts7751r2d_setup(char **cmdline_p)
/*
* The Machine Vector
*/
-struct sh_machine_vector mv_rts7751r2d __initmv = {
+static struct sh_machine_vector mv_rts7751r2d __initmv = {
.mv_name = "RTS7751R2D",
.mv_setup = rts7751r2d_setup,
.mv_nr_irqs = 72,
@@ -189,4 +189,3 @@ struct sh_machine_vector mv_rts7751r2d __initmv = {
.mv_consistent_free = voyagergx_consistent_free,
#endif
};
-ALIAS_MV(rts7751r2d)
diff --git a/arch/sh/boards/renesas/sh7710voipgw/setup.c b/arch/sh/boards/renesas/sh7710voipgw/setup.c
index 180810b1210..2dce8bd97f9 100644
--- a/arch/sh/boards/renesas/sh7710voipgw/setup.c
+++ b/arch/sh/boards/renesas/sh7710voipgw/setup.c
@@ -88,9 +88,8 @@ static void __init sh7710voipgw_init_irq(void)
/*
* The Machine Vector
*/
-struct sh_machine_vector mv_sh7710voipgw __initmv = {
+static struct sh_machine_vector mv_sh7710voipgw __initmv = {
.mv_name = "SH7710 VoIP Gateway",
.mv_nr_irqs = 104,
.mv_init_irq = sh7710voipgw_init_irq,
};
-ALIAS_MV(sh7710voipgw)
diff --git a/arch/sh/boards/renesas/systemh/setup.c b/arch/sh/boards/renesas/systemh/setup.c
index 936117659b7..ee78af84277 100644
--- a/arch/sh/boards/renesas/systemh/setup.c
+++ b/arch/sh/boards/renesas/systemh/setup.c
@@ -28,7 +28,7 @@ static void __init sh7751systemh_init_irq(void)
make_systemh_irq(0xb); /* Ethernet interrupt */
}
-struct sh_machine_vector mv_7751systemh __initmv = {
+static struct sh_machine_vector mv_7751systemh __initmv = {
.mv_name = "7751 SystemH",
.mv_nr_irqs = 72,
@@ -55,4 +55,3 @@ struct sh_machine_vector mv_7751systemh __initmv = {
.mv_init_irq = sh7751systemh_init_irq,
};
-ALIAS_MV(7751systemh)
diff --git a/arch/sh/boards/saturn/Makefile b/arch/sh/boards/saturn/Makefile
deleted file mode 100644
index 75a3042e252..00000000000
--- a/arch/sh/boards/saturn/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# Makefile for the Sega Saturn specific parts of the kernel
-#
-
-obj-y := setup.o io.o irq.o
-
-obj-$(CONFIG_SMP) += smp.o
-
diff --git a/arch/sh/boards/saturn/io.c b/arch/sh/boards/saturn/io.c
deleted file mode 100644
index c6e4f7f2e68..00000000000
--- a/arch/sh/boards/saturn/io.c
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * arch/sh/boards/saturn/io.c
- *
- * I/O routines for the Sega Saturn.
- *
- * Copyright (C) 2002 Paul Mundt
- *
- * Released under the terms of the GNU GPL v2.0.
- */
-#include <asm/saturn/io.h>
-#include <asm/machvec.h>
-
-unsigned long saturn_isa_port2addr(unsigned long offset)
-{
- return offset;
-}
-
-void *saturn_ioremap(unsigned long offset, unsigned long size)
-{
- return (void *)offset;
-}
-
-void saturn_iounmap(void *addr)
-{
-}
-
diff --git a/arch/sh/boards/saturn/irq.c b/arch/sh/boards/saturn/irq.c
deleted file mode 100644
index 15d1d3f0f78..00000000000
--- a/arch/sh/boards/saturn/irq.c
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * arch/sh/boards/saturn/irq.c
- *
- * Copyright (C) 2002 Paul Mundt
- *
- * Released under the terms of the GNU GPL v2.0.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-
-/*
- * Interrupts map out as follows:
- *
- * Vector Name Mask
- *
- * 64 VBLANKIN 0x0001
- * 65 VBLANKOUT 0x0002
- * 66 HBLANKIN 0x0004
- * 67 TIMER0 0x0008
- * 68 TIMER1 0x0010
- * 69 DSPEND 0x0020
- * 70 SOUNDREQUEST 0x0040
- * 71 SYSTEMMANAGER 0x0080
- * 72 PAD 0x0100
- * 73 LEVEL2DMAEND 0x0200
- * 74 LEVEL1DMAEND 0x0400
- * 75 LEVEL0DMAEND 0x0800
- * 76 DMAILLEGAL 0x1000
- * 77 SRITEDRAWEND 0x2000
- * 78 ABUS 0x8000
- *
- */
-#define SATURN_IRQ_MIN 64 /* VBLANKIN */
-#define SATURN_IRQ_MAX 78 /* ABUS */
-
-#define SATURN_IRQ_MASK 0xbfff
-
-static inline u32 saturn_irq_mask(unsigned int irq_nr)
-{
- u32 mask;
-
- mask = (1 << (irq_nr - SATURN_IRQ_MIN));
- mask <<= (irq_nr == SATURN_IRQ_MAX);
- mask &= SATURN_IRQ_MASK;
-
- return mask;
-}
-
-static inline void mask_saturn_irq(unsigned int irq_nr)
-{
- u32 mask;
-
- mask = ctrl_inl(SATURN_IMR);
- mask |= saturn_irq_mask(irq_nr);
- ctrl_outl(mask, SATURN_IMR);
-}
-
-static inline void unmask_saturn_irq(unsigned int irq_nr)
-{
- u32 mask;
-
- mask = ctrl_inl(SATURN_IMR);
- mask &= ~saturn_irq_mask(irq_nr);
- ctrl_outl(mask, SATURN_IMR);
-}
-
-static void disable_saturn_irq(unsigned int irq_nr)
-{
- mask_saturn_irq(irq_nr);
-}
-
-static void enable_saturn_irq(unsigned int irq_nr)
-{
- unmask_saturn_irq(irq_nr);
-}
-
-static void mask_and_ack_saturn_irq(unsigned int irq_nr)
-{
- mask_saturn_irq(irq_nr);
-}
-
-static void end_saturn_irq(unsigned int irq_nr)
-{
- if (!(irq_desc[irq_nr].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
- unmask_saturn_irq(irq_nr);
-}
-
-static unsigned int startup_saturn_irq(unsigned int irq_nr)
-{
- unmask_saturn_irq(irq_nr);
-
- return 0;
-}
-
-static void shutdown_saturn_irq(unsigned int irq_nr)
-{
- mask_saturn_irq(irq_nr);
-}
-
-static struct hw_interrupt_type saturn_int = {
- .typename = "Saturn",
- .enable = enable_saturn_irq,
- .disable = disable_saturn_irq,
- .ack = mask_and_ack_saturn_irq,
- .end = end_saturn_irq,
- .startup = startup_saturn_irq,
- .shutdown = shutdown_saturn_irq,
-};
-
-int saturn_irq_demux(int irq_nr)
-{
- /* FIXME */
- return irq_nr;
-}
-
diff --git a/arch/sh/boards/saturn/setup.c b/arch/sh/boards/saturn/setup.c
deleted file mode 100644
index a3a37c9aad2..00000000000
--- a/arch/sh/boards/saturn/setup.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * arch/sh/boards/saturn/setup.c
- *
- * Hardware support for the Sega Saturn.
- *
- * Copyright (c) 2002 Paul Mundt
- *
- * Released under the terms of the GNU GPL v2.0.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <asm/io.h>
-#include <asm/machvec.h>
-#include <asm/mach/io.h>
-
-extern int saturn_irq_demux(int irq_nr);
-
-/*
- * The Machine Vector
- */
-struct sh_machine_vector mv_saturn __initmv = {
- .mv_name = "Sega Saturn",
- .mv_nr_irqs = 80, /* Fix this later */
-
- .mv_isa_port2addr = saturn_isa_port2addr,
- .mv_irq_demux = saturn_irq_demux,
-
- .mv_ioremap = saturn_ioremap,
- .mv_iounmap = saturn_iounmap,
-};
-ALIAS_MV(saturn)
diff --git a/arch/sh/boards/saturn/smp.c b/arch/sh/boards/saturn/smp.c
deleted file mode 100644
index 76460918c9c..00000000000
--- a/arch/sh/boards/saturn/smp.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * arch/sh/boards/saturn/smp.c
- *
- * SMP support for the Sega Saturn.
- *
- * Copyright (c) 2002 Paul Mundt
- *
- * Released under the terms of the GNU GPL v2.0.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/smp.h>
-
-#include <asm/saturn/smpc.h>
-
-extern void start_secondary(void);
-
-void __smp_send_ipi(unsigned int cpu, unsigned int action)
-{
- /* Nothing here yet .. */
-}
-
-unsigned int __smp_probe_cpus(void)
-{
- /*
- * This is just a straightforward master/slave configuration,
- * and probing isn't really supported..
- */
- return 2;
-}
-
-/*
- * We're only allowed to do byte-access to SMPC registers. In
- * addition to which, we treat them as write-only, since
- * reading from them will return undefined data.
- */
-static inline void smpc_slave_stop(unsigned int cpu)
-{
- smpc_barrier();
- ctrl_outb(1, SMPC_STATUS);
-
- ctrl_outb(SMPC_CMD_SSHOFF, SMPC_COMMAND);
- smpc_barrier();
-}
-
-static inline void smpc_slave_start(unsigned int cpu)
-{
- ctrl_outb(1, SMPC_STATUS);
- ctrl_outb(SMPC_CMD_SSHON, SMPC_COMMAND);
-
- smpc_barrier();
-}
-
-void __smp_slave_init(unsigned int cpu)
-{
- register unsigned long vbr;
- void **entry;
-
- __asm__ __volatile__ ("stc vbr, %0\n\t" : "=r" (vbr));
- entry = (void **)(vbr + 0x310 + 0x94);
-
- smpc_slave_stop(cpu);
-
- *(void **)entry = (void *)start_secondary;
-
- smpc_slave_start(cpu);
-}
-
diff --git a/arch/sh/boards/se/7206/setup.c b/arch/sh/boards/se/7206/setup.c
index ca714879f55..a074b62505e 100644
--- a/arch/sh/boards/se/7206/setup.c
+++ b/arch/sh/boards/se/7206/setup.c
@@ -70,7 +70,7 @@ __initcall(se7206_devices_setup);
* The Machine Vector
*/
-struct sh_machine_vector mv_se __initmv = {
+static struct sh_machine_vector mv_se __initmv = {
.mv_name = "SolutionEngine",
.mv_nr_irqs = 256,
.mv_inb = se7206_inb,
@@ -96,4 +96,3 @@ struct sh_machine_vector mv_se __initmv = {
.mv_init_irq = init_se7206_IRQ,
};
-ALIAS_MV(se)
diff --git a/arch/sh/boards/se/7300/setup.c b/arch/sh/boards/se/7300/setup.c
index f1960956bad..eb469f5b6e9 100644
--- a/arch/sh/boards/se/7300/setup.c
+++ b/arch/sh/boards/se/7300/setup.c
@@ -46,7 +46,7 @@ __initcall(se7300_devices_setup);
/*
* The Machine Vector
*/
-struct sh_machine_vector mv_7300se __initmv = {
+static struct sh_machine_vector mv_7300se __initmv = {
.mv_name = "SolutionEngine 7300",
.mv_nr_irqs = 109,
.mv_inb = sh7300se_inb,
@@ -72,4 +72,3 @@ struct sh_machine_vector mv_7300se __initmv = {
.mv_init_irq = init_7300se_IRQ,
};
-ALIAS_MV(7300se)
diff --git a/arch/sh/boards/se/73180/setup.c b/arch/sh/boards/se/73180/setup.c
index e143017c897..1deee855664 100644
--- a/arch/sh/boards/se/73180/setup.c
+++ b/arch/sh/boards/se/73180/setup.c
@@ -46,7 +46,7 @@ __initcall(se73180_devices_setup);
/*
* The Machine Vector
*/
-struct sh_machine_vector mv_73180se __initmv = {
+static struct sh_machine_vector mv_73180se __initmv = {
.mv_name = "SolutionEngine 73180",
.mv_nr_irqs = 108,
.mv_inb = sh73180se_inb,
@@ -73,4 +73,3 @@ struct sh_machine_vector mv_73180se __initmv = {
.mv_init_irq = init_73180se_IRQ,
.mv_irq_demux = shmse_irq_demux,
};
-ALIAS_MV(73180se)
diff --git a/arch/sh/boards/se/7343/setup.c b/arch/sh/boards/se/7343/setup.c
index 3fdb16f2cef..8fec155e2ff 100644
--- a/arch/sh/boards/se/7343/setup.c
+++ b/arch/sh/boards/se/7343/setup.c
@@ -64,7 +64,7 @@ static void __init sh7343se_setup(char **cmdline_p)
/*
* The Machine Vector
*/
-struct sh_machine_vector mv_7343se __initmv = {
+static struct sh_machine_vector mv_7343se __initmv = {
.mv_name = "SolutionEngine 7343",
.mv_setup = sh7343se_setup,
.mv_nr_irqs = 108,
@@ -92,4 +92,3 @@ struct sh_machine_vector mv_7343se __initmv = {
.mv_init_irq = init_7343se_IRQ,
.mv_irq_demux = shmse_irq_demux,
};
-ALIAS_MV(7343se)
diff --git a/arch/sh/boards/se/7619/setup.c b/arch/sh/boards/se/7619/setup.c
index 52d2c4d5d2f..1d0ef7faa10 100644
--- a/arch/sh/boards/se/7619/setup.c
+++ b/arch/sh/boards/se/7619/setup.c
@@ -15,8 +15,7 @@
* The Machine Vector
*/
-struct sh_machine_vector mv_se __initmv = {
+static struct sh_machine_vector mv_se __initmv = {
.mv_name = "SolutionEngine",
.mv_nr_irqs = 108,
};
-ALIAS_MV(se)
diff --git a/arch/sh/boards/se/770x/irq.c b/arch/sh/boards/se/770x/irq.c
index c8eccff77a0..cdb0807928a 100644
--- a/arch/sh/boards/se/770x/irq.c
+++ b/arch/sh/boards/se/770x/irq.c
@@ -15,46 +15,7 @@
#include <asm/io.h>
#include <asm/se.h>
-/*
- * If the problem of make_ipr_irq is solved,
- * this code will become unnecessary. :-)
- */
-static void se770x_disable_ipr_irq(unsigned int irq)
-{
- struct ipr_data *p = get_irq_chip_data(irq);
-
- ctrl_outw(ctrl_inw(p->addr) & (0xffff ^ (0xf << p->shift)), p->addr);
-}
-
-static void se770x_enable_ipr_irq(unsigned int irq)
-{
- struct ipr_data *p = get_irq_chip_data(irq);
-
- ctrl_outw(ctrl_inw(p->addr) | (p->priority << p->shift), p->addr);
-}
-
-static struct irq_chip se770x_irq_chip = {
- .name = "MS770xSE-FPGA",
- .mask = se770x_disable_ipr_irq,
- .unmask = se770x_enable_ipr_irq,
- .mask_ack = se770x_disable_ipr_irq,
-};
-
-void make_se770x_irq(struct ipr_data *table, unsigned int nr_irqs)
-{
- int i;
-
- for (i = 0; i < nr_irqs; i++) {
- unsigned int irq = table[i].irq;
- disable_irq_nosync(irq);
- set_irq_chip_and_handler_name(irq, &se770x_irq_chip,
- handle_level_irq, "level");
- set_irq_chip_data(irq, &table[i]);
- se770x_enable_ipr_irq(irq);
- }
-}
-
-static struct ipr_data se770x_ipr_map[] = {
+static struct ipr_data ipr_irq_table[] = {
/*
* Super I/O (Just mimic PC):
* 1: keyboard
@@ -68,46 +29,67 @@ static struct ipr_data se770x_ipr_map[] = {
*/
#if defined(CONFIG_CPU_SUBTYPE_SH7705)
/* This is default value */
- { 13, 0, 8, 0x0f-13 ,BCR_ILCRA},
- { 5 , 0, 4, 0x0f- 5 ,BCR_ILCRA},
- { 10, 0, 0, 0x0f-10, BCR_ILCRB},
- { 7 , 0, 4, 0x0f- 7, BCR_ILCRC},
- { 3 , 0, 0, 0x0f- 3, BCR_ILCRC},
- { 1 , 0, 12, 0x0f- 1, BCR_ILCRD},
- { 12, 0, 4, 0x0f-12, BCR_ILCRD}, /* LAN */
- { 2 , 0, 8, 0x0f- 2, BCR_ILCRE}, /* PCIRQ2 */
- { 6 , 0, 4, 0x0f- 6, BCR_ILCRE}, /* PCIRQ1 */
- { 14, 0, 0, 0x0f-14, BCR_ILCRE}, /* PCIRQ0 */
- { 0 , 0, 12, 0x0f , BCR_ILCRF},
- { 4 , 0, 4, 0x0f- 4, BCR_ILCRF},
- { 8 , 0, 12, 0x0f- 8, BCR_ILCRG},
- { 9 , 0, 8, 0x0f- 9, BCR_ILCRG},
- { 11, 0, 4, 0x0f-11, BCR_ILCRG},
+ { 13, 0, 8, 0x0f-13, },
+ { 5 , 0, 4, 0x0f- 5, },
+ { 10, 1, 0, 0x0f-10, },
+ { 7 , 2, 4, 0x0f- 7, },
+ { 3 , 2, 0, 0x0f- 3, },
+ { 1 , 3, 12, 0x0f- 1, },
+ { 12, 3, 4, 0x0f-12, }, /* LAN */
+ { 2 , 4, 8, 0x0f- 2, }, /* PCIRQ2 */
+ { 6 , 4, 4, 0x0f- 6, }, /* PCIRQ1 */
+ { 14, 4, 0, 0x0f-14, }, /* PCIRQ0 */
+ { 0 , 5, 12, 0x0f , },
+ { 4 , 5, 4, 0x0f- 4, },
+ { 8 , 6, 12, 0x0f- 8, },
+ { 9 , 6, 8, 0x0f- 9, },
+ { 11, 6, 4, 0x0f-11, },
#else
- { 14, 0, 8, 0x0f-14 ,BCR_ILCRA},
- { 12, 0, 4, 0x0f-12 ,BCR_ILCRA},
- { 8, 0, 4, 0x0f- 8 ,BCR_ILCRB},
- { 6, 0, 12, 0x0f- 6 ,BCR_ILCRC},
- { 5, 0, 8, 0x0f- 5 ,BCR_ILCRC},
- { 4, 0, 4, 0x0f- 4 ,BCR_ILCRC},
- { 3, 0, 0, 0x0f- 3 ,BCR_ILCRC},
- { 1, 0, 12, 0x0f- 1 ,BCR_ILCRD},
+ { 14, 0, 8, 0x0f-14, },
+ { 12, 0, 4, 0x0f-12, },
+ { 8, 1, 4, 0x0f- 8, },
+ { 6, 2, 12, 0x0f- 6, },
+ { 5, 2, 8, 0x0f- 5, },
+ { 4, 2, 4, 0x0f- 4, },
+ { 3, 2, 0, 0x0f- 3, },
+ { 1, 3, 12, 0x0f- 1, },
#if defined(CONFIG_STNIC)
/* ST NIC */
- { 10, 0, 4, 0x0f-10 ,BCR_ILCRD}, /* LAN */
+ { 10, 3, 4, 0x0f-10, }, /* LAN */
#endif
/* MRSHPC IRQs setting */
- { 0, 0, 12, 0x0f- 0 ,BCR_ILCRE}, /* PCIRQ3 */
- { 11, 0, 8, 0x0f-11 ,BCR_ILCRE}, /* PCIRQ2 */
- { 9, 0, 4, 0x0f- 9 ,BCR_ILCRE}, /* PCIRQ1 */
- { 7, 0, 0, 0x0f- 7 ,BCR_ILCRE}, /* PCIRQ0 */
+ { 0, 4, 12, 0x0f- 0, }, /* PCIRQ3 */
+ { 11, 4, 8, 0x0f-11, }, /* PCIRQ2 */
+ { 9, 4, 4, 0x0f- 9, }, /* PCIRQ1 */
+ { 7, 4, 0, 0x0f- 7, }, /* PCIRQ0 */
/* #2, #13 are allocated for SLOT IRQ #1 and #2 (for now) */
/* NOTE: #2 and #13 are not used on PC */
- { 13, 0, 4, 0x0f-13 ,BCR_ILCRG}, /* SLOTIRQ2 */
- { 2, 0, 0, 0x0f- 2 ,BCR_ILCRG}, /* SLOTIRQ1 */
+ { 13, 6, 4, 0x0f-13, }, /* SLOTIRQ2 */
+ { 2, 6, 0, 0x0f- 2, }, /* SLOTIRQ1 */
#endif
};
+static unsigned long ipr_offsets[] = {
+ BCR_ILCRA,
+ BCR_ILCRB,
+ BCR_ILCRC,
+ BCR_ILCRD,
+ BCR_ILCRE,
+ BCR_ILCRF,
+ BCR_ILCRG,
+};
+
+static struct ipr_desc ipr_irq_desc = {
+ .ipr_offsets = ipr_offsets,
+ .nr_offsets = ARRAY_SIZE(ipr_offsets),
+
+ .ipr_data = ipr_irq_table,
+ .nr_irqs = ARRAY_SIZE(ipr_irq_table),
+ .chip = {
+ .name = "IPR-se770x",
+ },
+};
+
/*
* Initialize IRQ setting
*/
@@ -122,5 +104,5 @@ void __init init_se_IRQ(void)
ctrl_outw(0, BCR_ILCRF);
ctrl_outw(0, BCR_ILCRG);
- make_se770x_irq(se770x_ipr_map, ARRAY_SIZE(se770x_ipr_map));
+ register_ipr_controller(&ipr_irq_desc);
}
diff --git a/arch/sh/boards/se/770x/setup.c b/arch/sh/boards/se/770x/setup.c
index 17a2631de3b..2962da148f3 100644
--- a/arch/sh/boards/se/770x/setup.c
+++ b/arch/sh/boards/se/770x/setup.c
@@ -122,7 +122,7 @@ device_initcall(se_devices_setup);
/*
* The Machine Vector
*/
-struct sh_machine_vector mv_se __initmv = {
+static struct sh_machine_vector mv_se __initmv = {
.mv_name = "SolutionEngine",
.mv_setup = smsc_setup,
#if defined(CONFIG_CPU_SH4)
@@ -160,4 +160,3 @@ struct sh_machine_vector mv_se __initmv = {
.mv_init_irq = init_se_IRQ,
};
-ALIAS_MV(se)
diff --git a/arch/sh/boards/se/7722/irq.c b/arch/sh/boards/se/7722/irq.c
index 099e5deb77f..26cff0efda4 100644
--- a/arch/sh/boards/se/7722/irq.c
+++ b/arch/sh/boards/se/7722/irq.c
@@ -19,15 +19,24 @@
#define INTC_INTMSK0 0xFFD00044
#define INTC_INTMSKCLR0 0xFFD00064
+struct se7722_data {
+ unsigned char irq;
+ unsigned char ipr_idx;
+ unsigned char shift;
+ unsigned short priority;
+ unsigned long addr;
+};
+
+
static void disable_se7722_irq(unsigned int irq)
{
- struct ipr_data *p = get_irq_chip_data(irq);
+ struct se7722_data *p = get_irq_chip_data(irq);
ctrl_outw( ctrl_inw( p->addr ) | p->priority , p->addr );
}
static void enable_se7722_irq(unsigned int irq)
{
- struct ipr_data *p = get_irq_chip_data(irq);
+ struct se7722_data *p = get_irq_chip_data(irq);
ctrl_outw( ctrl_inw( p->addr ) & ~p->priority , p->addr );
}
@@ -38,7 +47,7 @@ static struct irq_chip se7722_irq_chip __read_mostly = {
.mask_ack = disable_se7722_irq,
};
-static struct ipr_data ipr_irq_table[] = {
+static struct se7722_data ipr_irq_table[] = {
/* irq ,idx,sft, priority , addr */
{ MRSHPC_IRQ0 , 0 , 0 , MRSHPC_BIT0 , IRQ01_MASK } ,
{ MRSHPC_IRQ1 , 0 , 0 , MRSHPC_BIT1 , IRQ01_MASK } ,
diff --git a/arch/sh/boards/se/7722/setup.c b/arch/sh/boards/se/7722/setup.c
index 636ca6c987e..6cca6cbc806 100644
--- a/arch/sh/boards/se/7722/setup.c
+++ b/arch/sh/boards/se/7722/setup.c
@@ -137,7 +137,7 @@ static void __init se7722_setup(char **cmdline_p)
/*
* The Machine Vector
*/
-struct sh_machine_vector mv_se7722 __initmv = {
+static struct sh_machine_vector mv_se7722 __initmv = {
.mv_name = "Solution Engine 7722" ,
.mv_setup = se7722_setup ,
.mv_nr_irqs = 109 ,
@@ -145,4 +145,3 @@ struct sh_machine_vector mv_se7722 __initmv = {
.mv_irq_demux = se7722_irq_demux,
};
-ALIAS_MV(se7722)
diff --git a/arch/sh/boards/se/7751/irq.c b/arch/sh/boards/se/7751/irq.c
index e4c63a48296..c3d12590e5d 100644
--- a/arch/sh/boards/se/7751/irq.c
+++ b/arch/sh/boards/se/7751/irq.c
@@ -14,44 +14,31 @@
#include <asm/irq.h>
#include <asm/se7751.h>
-static struct ipr_data se7751_ipr_map[] = {
- /* Leave old Solution Engine code in for reference. */
-#if defined(CONFIG_SH_SOLUTION_ENGINE)
- /*
- * Super I/O (Just mimic PC):
- * 1: keyboard
- * 3: serial 0
- * 4: serial 1
- * 5: printer
- * 6: floppy
- * 8: rtc
- * 12: mouse
- * 14: ide0
- */
- { 14, BCR_ILCRA, 2, 0x0f-14 },
- { 12, BCR_ILCRA, 1, 0x0f-12 },
- { 8, BCR_ILCRB, 1, 0x0f- 8 },
- { 6, BCR_ILCRC, 3, 0x0f- 6 },
- { 5, BCR_ILCRC, 2, 0x0f- 5 },
- { 4, BCR_ILCRC, 1, 0x0f- 4 },
- { 3, BCR_ILCRC, 0, 0x0f- 3 },
- { 1, BCR_ILCRD, 3, 0x0f- 1 },
+static struct ipr_data ipr_irq_table[] = {
+ { 13, 3, 3, 2 },
+ /* Add additional entries here as drivers are added and tested. */
+};
- { 10, BCR_ILCRD, 1, 0x0f-10 }, /* LAN */
+static unsigned long ipr_offsets[] = {
+ BCR_ILCRA,
+ BCR_ILCRB,
+ BCR_ILCRC,
+ BCR_ILCRD,
+ BCR_ILCRE,
+ BCR_ILCRF,
+ BCR_ILCRG,
+};
- { 0, BCR_ILCRE, 3, 0x0f- 0 }, /* PCIRQ3 */
- { 11, BCR_ILCRE, 2, 0x0f-11 }, /* PCIRQ2 */
- { 9, BCR_ILCRE, 1, 0x0f- 9 }, /* PCIRQ1 */
- { 7, BCR_ILCRE, 0, 0x0f- 7 }, /* PCIRQ0 */
+static struct ipr_desc ipr_irq_desc = {
+ .ipr_offsets = ipr_offsets,
+ .nr_offsets = ARRAY_SIZE(ipr_offsets),
- /* #2, #13 are allocated for SLOT IRQ #1 and #2 (for now) */
- /* NOTE: #2 and #13 are not used on PC */
- { 13, BCR_ILCRG, 1, 0x0f-13 }, /* SLOTIRQ2 */
- { 2, BCR_ILCRG, 0, 0x0f- 2 }, /* SLOTIRQ1 */
-#elif defined(CONFIG_SH_7751_SOLUTION_ENGINE)
- { 13, BCR_ILCRD, 3, 2 },
- /* Add additional entries here as drivers are added and tested. */
-#endif
+ .ipr_data = ipr_irq_table,
+ .nr_irqs = ARRAY_SIZE(ipr_irq_table),
+
+ .chip = {
+ .name = "IPR-se7751",
+ },
};
/*
@@ -59,5 +46,5 @@ static struct ipr_data se7751_ipr_map[] = {
*/
void __init init_7751se_IRQ(void)
{
- make_ipr_irq(se7751_ipr_map, ARRAY_SIZE(se7751_ipr_map));
+ register_ipr_controller(&ipr_irq_desc);
}
diff --git a/arch/sh/boards/se/7751/setup.c b/arch/sh/boards/se/7751/setup.c
index 52c7bfa57c2..7873d07e40c 100644
--- a/arch/sh/boards/se/7751/setup.c
+++ b/arch/sh/boards/se/7751/setup.c
@@ -48,7 +48,7 @@ __initcall(se7751_devices_setup);
/*
* The Machine Vector
*/
-struct sh_machine_vector mv_7751se __initmv = {
+static struct sh_machine_vector mv_7751se __initmv = {
.mv_name = "7751 SolutionEngine",
.mv_nr_irqs = 72,
@@ -71,4 +71,3 @@ struct sh_machine_vector mv_7751se __initmv = {
.mv_init_irq = init_7751se_IRQ,
};
-ALIAS_MV(7751se)
diff --git a/arch/sh/boards/se/7780/irq.c b/arch/sh/boards/se/7780/irq.c
index 3d0625c2d07..87491474600 100644
--- a/arch/sh/boards/se/7780/irq.c
+++ b/arch/sh/boards/se/7780/irq.c
@@ -16,28 +16,6 @@
#include <asm/io.h>
#include <asm/se7780.h>
-#define INTC_INTMSK0 0xFFD00044
-#define INTC_INTMSKCLR0 0xFFD00064
-
-static void disable_se7780_irq(unsigned int irq)
-{
- struct intc2_data *p = get_irq_chip_data(irq);
- ctrl_outl(1 << p->msk_shift, INTC_INTMSK0 + p->msk_offset);
-}
-
-static void enable_se7780_irq(unsigned int irq)
-{
- struct intc2_data *p = get_irq_chip_data(irq);
- ctrl_outl(1 << p->msk_shift, INTC_INTMSKCLR0 + p->msk_offset);
-}
-
-static struct irq_chip se7780_irq_chip __read_mostly = {
- .name = "SE7780",
- .mask = disable_se7780_irq,
- .unmask = enable_se7780_irq,
- .mask_ack = disable_se7780_irq,
-};
-
static struct intc2_data intc2_irq_table[] = {
{ 2, 0, 31, 0, 31, 3 }, /* daughter board EXTINT1 */
{ 4, 0, 30, 0, 30, 3 }, /* daughter board EXTINT2 */
@@ -51,13 +29,24 @@ static struct intc2_data intc2_irq_table[] = {
{ 0 , 0, 24, 0, 24, 3 }, /* SM501 */
};
+static struct intc2_desc intc2_irq_desc __read_mostly = {
+ .prio_base = 0, /* N/A */
+ .msk_base = 0xffd00044,
+ .mskclr_base = 0xffd00064,
+
+ .intc2_data = intc2_irq_table,
+ .nr_irqs = ARRAY_SIZE(intc2_irq_table),
+
+ .chip = {
+ .name = "INTC2-se7780",
+ },
+};
+
/*
* Initialize IRQ setting
*/
void __init init_se7780_IRQ(void)
{
- int i ;
-
/* enable all interrupt at FPGA */
ctrl_outw(0, FPGA_INTMSK1);
/* mask SM501 interrupt */
@@ -79,11 +68,5 @@ void __init init_se7780_IRQ(void)
/* FPGA + 0x0A */
ctrl_outw((IRQPIN_PCCPW << IRQPOS_PCCPW), FPGA_INTSEL3);
- for (i = 0; i < ARRAY_SIZE(intc2_irq_table); i++) {
- disable_irq_nosync(intc2_irq_table[i].irq);
- set_irq_chip_and_handler_name( intc2_irq_table[i].irq, &se7780_irq_chip,
- handle_level_irq, "level");
- set_irq_chip_data( intc2_irq_table[i].irq, &intc2_irq_table[i] );
- disable_se7780_irq(intc2_irq_table[i].irq);
- }
+ register_intc2_controller(&intc2_irq_desc);
}
diff --git a/arch/sh/boards/se/7780/setup.c b/arch/sh/boards/se/7780/setup.c
index df7d08a24c9..723f2fd4d55 100644
--- a/arch/sh/boards/se/7780/setup.c
+++ b/arch/sh/boards/se/7780/setup.c
@@ -113,10 +113,9 @@ static void __init se7780_setup(char **cmdline_p)
/*
* The Machine Vector
*/
-struct sh_machine_vector mv_se7780 __initmv = {
+static struct sh_machine_vector mv_se7780 __initmv = {
.mv_name = "Solution Engine 7780" ,
.mv_setup = se7780_setup ,
.mv_nr_irqs = 111 ,
.mv_init_irq = init_se7780_IRQ,
};
-ALIAS_MV(se7780)
diff --git a/arch/sh/boards/sh03/setup.c b/arch/sh/boards/sh03/setup.c
index c069c444b4e..9c031a8c0a1 100644
--- a/arch/sh/boards/sh03/setup.c
+++ b/arch/sh/boards/sh03/setup.c
@@ -15,17 +15,33 @@
#include <asm/sh03/sh03.h>
#include <asm/addrspace.h>
-static struct ipr_data sh03_ipr_map[] = {
- { IRL0_IRQ, IRL0_IPR_ADDR, IRL0_IPR_POS, IRL0_PRIORITY },
- { IRL1_IRQ, IRL1_IPR_ADDR, IRL1_IPR_POS, IRL1_PRIORITY },
- { IRL2_IRQ, IRL2_IPR_ADDR, IRL2_IPR_POS, IRL2_PRIORITY },
- { IRL3_IRQ, IRL3_IPR_ADDR, IRL3_IPR_POS, IRL3_PRIORITY },
+static struct ipr_data ipr_irq_table[] = {
+ { IRL0_IRQ, 0, IRL0_IPR_POS, IRL0_PRIORITY },
+ { IRL1_IRQ, 0, IRL1_IPR_POS, IRL1_PRIORITY },
+ { IRL2_IRQ, 0, IRL2_IPR_POS, IRL2_PRIORITY },
+ { IRL3_IRQ, 0, IRL3_IPR_POS, IRL3_PRIORITY },
+};
+
+static unsigned long ipr_offsets[] = {
+ INTC_IPRD,
+};
+
+static struct ipr_desc ipr_irq_desc = {
+ .ipr_offsets = ipr_offsets,
+ .nr_offsets = ARRAY_SIZE(ipr_offsets),
+
+ .ipr_data = ipr_irq_table,
+ .nr_irqs = ARRAY_SIZE(ipr_irq_table),
+
+ .chip = {
+ .name = "IPR-sh03",
+ },
};
static void __init init_sh03_IRQ(void)
{
ctrl_outw(ctrl_inw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR);
- make_ipr_irq(sh03_ipr_map, ARRAY_SIZE(sh03_ipr_map));
+ register_ipr_controller(&ipr_irq_desc);
}
extern void *cf_io_base;
@@ -74,11 +90,10 @@ static int __init sh03_devices_setup(void)
}
__initcall(sh03_devices_setup);
-struct sh_machine_vector mv_sh03 __initmv = {
+static struct sh_machine_vector mv_sh03 __initmv = {
.mv_name = "Interface (CTP/PCI-SH03)",
.mv_setup = sh03_setup,
.mv_nr_irqs = 48,
.mv_ioport_map = sh03_ioport_map,
.mv_init_irq = init_sh03_IRQ,
};
-ALIAS_MV(sh03)
diff --git a/arch/sh/boards/shmin/setup.c b/arch/sh/boards/shmin/setup.c
index 4a9df4a6b03..dfd124509f4 100644
--- a/arch/sh/boards/shmin/setup.c
+++ b/arch/sh/boards/shmin/setup.c
@@ -6,28 +6,44 @@
* SHMIN Support.
*/
#include <linux/init.h>
+#include <linux/irq.h>
#include <asm/machvec.h>
#include <asm/shmin.h>
#include <asm/clock.h>
-#include <asm/irq.h>
#include <asm/io.h>
#define PFC_PHCR 0xa400010eUL
#define INTC_ICR1 0xa4000010UL
#define INTC_IPRC 0xa4000016UL
-static struct ipr_data shmin_ipr_map[] = {
- { .irq=32, .addr=INTC_IPRC, .shift= 0, .priority=0 },
- { .irq=33, .addr=INTC_IPRC, .shift= 4, .priority=0 },
- { .irq=34, .addr=INTC_IPRC, .shift= 8, .priority=8 },
- { .irq=35, .addr=INTC_IPRC, .shift=12, .priority=0 },
+static struct ipr_data ipr_irq_table[] = {
+ { 32, 0, 0, 0 },
+ { 33, 0, 4, 0 },
+ { 34, 0, 8, 8 },
+ { 35, 0, 12, 0 },
+};
+
+static unsigned long ipr_offsets[] = {
+ INTC_IPRC,
+};
+
+static struct ipr_desc ipr_irq_desc = {
+ .ipr_offsets = ipr_offsets,
+ .nr_offsets = ARRAY_SIZE(ipr_offsets),
+
+ .ipr_data = ipr_irq_table,
+ .nr_irqs = ARRAY_SIZE(ipr_irq_table),
+
+ .chip = {
+ .name = "IPR-shmin",
+ },
};
static void __init init_shmin_irq(void)
{
ctrl_outw(0x2a00, PFC_PHCR); // IRQ0-3=IRQ
ctrl_outw(0x0aaa, INTC_ICR1); // IRQ0-3=IRQ-mode,Low-active.
- make_ipr_irq(shmin_ipr_map, ARRAY_SIZE(shmin_ipr_map));
+ register_ipr_controller(&ipr_irq_desc);
}
static void __iomem *shmin_ioport_map(unsigned long port, unsigned int size)
@@ -43,9 +59,8 @@ static void __iomem *shmin_ioport_map(unsigned long port, unsigned int size)
}
-struct sh_machine_vector mv_shmin __initmv = {
+static struct sh_machine_vector mv_shmin __initmv = {
.mv_name = "SHMIN",
.mv_init_irq = init_shmin_irq,
.mv_ioport_map = shmin_ioport_map,
};
-ALIAS_MV(shmin)
diff --git a/arch/sh/boards/snapgear/setup.c b/arch/sh/boards/snapgear/setup.c
index 650fb364594..84271d85a8d 100644
--- a/arch/sh/boards/snapgear/setup.c
+++ b/arch/sh/boards/snapgear/setup.c
@@ -68,11 +68,27 @@ module_init(eraseconfig_init);
* IRL3 = crypto
*/
-static struct ipr_data snapgear_ipr_map[] = {
- make_ipr_irq(IRL0_IRQ, IRL0_IPR_ADDR, IRL0_IPR_POS, IRL0_PRIORITY);
- make_ipr_irq(IRL1_IRQ, IRL1_IPR_ADDR, IRL1_IPR_POS, IRL1_PRIORITY);
- make_ipr_irq(IRL2_IRQ, IRL2_IPR_ADDR, IRL2_IPR_POS, IRL2_PRIORITY);
- make_ipr_irq(IRL3_IRQ, IRL3_IPR_ADDR, IRL3_IPR_POS, IRL3_PRIORITY);
+static struct ipr_data ipr_irq_table[] = {
+ { IRL0_IRQ, 0, IRL0_IPR_POS, IRL0_PRIORITY },
+ { IRL1_IRQ, 0, IRL1_IPR_POS, IRL1_PRIORITY },
+ { IRL2_IRQ, 0, IRL2_IPR_POS, IRL2_PRIORITY },
+ { IRL3_IRQ, 0, IRL3_IPR_POS, IRL3_PRIORITY },
+};
+
+static unsigned long ipr_offsets[] = {
+ INTC_IPRD,
+};
+
+static struct ipr_desc ipr_irq_desc = {
+ .ipr_offsets = ipr_offsets,
+ .nr_offsets = ARRAY_SIZE(ipr_offsets),
+
+ .ipr_data = ipr_irq_table,
+ .nr_irqs = ARRAY_SIZE(ipr_irq_table),
+
+ .chip = {
+ .name = "IPR-snapgear",
+ },
};
static void __init init_snapgear_IRQ(void)
@@ -82,7 +98,7 @@ static void __init init_snapgear_IRQ(void)
printk("Setup SnapGear IRQ/IPR ...\n");
- make_ipr_irq(snapgear_ipr_map, ARRAY_SIZE(snapgear_ipr_map));
+ register_ipr_controller(&ipr_irq_desc);
}
/*
@@ -96,7 +112,7 @@ static void __init snapgear_setup(char **cmdline_p)
/*
* The Machine Vector
*/
-struct sh_machine_vector mv_snapgear __initmv = {
+static struct sh_machine_vector mv_snapgear __initmv = {
.mv_name = "SnapGear SecureEdge5410",
.mv_setup = snapgear_setup,
.mv_nr_irqs = 72,
@@ -117,4 +133,3 @@ struct sh_machine_vector mv_snapgear __initmv = {
.mv_init_irq = init_snapgear_IRQ,
};
-ALIAS_MV(snapgear)
diff --git a/arch/sh/boards/superh/microdev/setup.c b/arch/sh/boards/superh/microdev/setup.c
index 6396cea1c89..fc8cd06d66c 100644
--- a/arch/sh/boards/superh/microdev/setup.c
+++ b/arch/sh/boards/superh/microdev/setup.c
@@ -371,7 +371,7 @@ static void __init microdev_setup(char **cmdline_p)
/*
* The Machine Vector
*/
-struct sh_machine_vector mv_sh4202_microdev __initmv = {
+static struct sh_machine_vector mv_sh4202_microdev __initmv = {
.mv_name = "SH4-202 MicroDev",
.mv_setup = microdev_setup,
.mv_nr_irqs = 72, /* QQQ need to check this - use the MACRO */
@@ -403,4 +403,3 @@ struct sh_machine_vector mv_sh4202_microdev __initmv = {
.mv_heartbeat = microdev_heartbeat,
#endif
};
-ALIAS_MV(sh4202_microdev)
diff --git a/arch/sh/boards/titan/setup.c b/arch/sh/boards/titan/setup.c
index 6bcd939bfae..606d25a4b87 100644
--- a/arch/sh/boards/titan/setup.c
+++ b/arch/sh/boards/titan/setup.c
@@ -12,7 +12,7 @@
#include <asm/titan.h>
#include <asm/io.h>
-static struct ipr_data titan_ipr_map[] = {
+static struct ipr_data ipr_irq_table[] = {
/* IRQ, IPR idx, shift, prio */
{ TITAN_IRQ_WAN, 3, 12, 8 }, /* eth0 (WAN) */
{ TITAN_IRQ_LAN, 3, 8, 8 }, /* eth1 (LAN) */
@@ -20,15 +20,33 @@ static struct ipr_data titan_ipr_map[] = {
{ TITAN_IRQ_USB, 3, 0, 8 }, /* mPCI B (bottom), USB */
};
+static unsigned long ipr_offsets[] = { /* stolen from setup-sh7750.c */
+ 0xffd00004UL, /* 0: IPRA */
+ 0xffd00008UL, /* 1: IPRB */
+ 0xffd0000cUL, /* 2: IPRC */
+ 0xffd00010UL, /* 3: IPRD */
+};
+
+static struct ipr_desc ipr_irq_desc = {
+ .ipr_offsets = ipr_offsets,
+ .nr_offsets = ARRAY_SIZE(ipr_offsets),
+
+ .ipr_data = ipr_irq_table,
+ .nr_irqs = ARRAY_SIZE(ipr_irq_table),
+
+ .chip = {
+ .name = "IPR-titan",
+ },
+};
static void __init init_titan_irq(void)
{
/* enable individual interrupt mode for externals */
ipr_irq_enable_irlm();
/* register ipr irqs */
- make_ipr_irq(titan_ipr_map, ARRAY_SIZE(titan_ipr_map));
+ register_ipr_controller(&ipr_irq_desc);
}
-struct sh_machine_vector mv_titan __initmv = {
+static struct sh_machine_vector mv_titan __initmv = {
.mv_name = "Titan",
.mv_inb = titan_inb,
@@ -52,4 +70,3 @@ struct sh_machine_vector mv_titan __initmv = {
.mv_init_irq = init_titan_irq,
};
-ALIAS_MV(titan)
diff --git a/arch/sh/boards/unknown/Makefile b/arch/sh/boards/unknown/Makefile
deleted file mode 100644
index 7d18f408b0c..00000000000
--- a/arch/sh/boards/unknown/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-#
-# Makefile for unknown SH boards
-#
-
-obj-y := setup.o
-
diff --git a/arch/sh/boards/unknown/setup.c b/arch/sh/boards/unknown/setup.c
deleted file mode 100644
index bee4612de59..00000000000
--- a/arch/sh/boards/unknown/setup.c
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * linux/arch/sh/boards/unknown/setup.c
- *
- * Copyright (C) 2002 Paul Mundt
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * Setup code for an unknown machine (internal peripherals only)
- *
- * This is the simplest of all boards, and serves only as a quick and dirty
- * method to start debugging a new board during bring-up until proper board
- * setup code is written.
- */
-#include <linux/init.h>
-#include <asm/machvec.h>
-
-struct sh_machine_vector mv_unknown __initmv = {
- .mv_name = "Unknown",
-};
-ALIAS_MV(unknown)
diff --git a/arch/sh/cchips/Kconfig b/arch/sh/cchips/Kconfig
index 0582ca8346b..2e516e9a6ed 100644
--- a/arch/sh/cchips/Kconfig
+++ b/arch/sh/cchips/Kconfig
@@ -13,10 +13,8 @@ config VOYAGERGX
are additional GPIO bits that can be used to interface to
external as well.
-# A board must have defined HD6446X_SERIES in order to see these
config HD6446X_SERIES
- bool "HD6446x support"
- default n
+ bool
choice
prompt "HD6446x options"
@@ -25,7 +23,6 @@ choice
config HD64461
bool "Hitachi HD64461 companion chip support"
- depends on CPU_SUBTYPE_SH7709
---help---
The Hitachi HD64461 provides an interface for
the SH7709 CPU, supporting a LCD controller,
@@ -40,7 +37,6 @@ config HD64461
config HD64465
bool "Hitachi HD64465 companion chip support"
- depends on CPU_SUBTYPE_SH7750
---help---
The Hitachi HD64465 provides an interface for
the SH7750 CPU, supporting a LCD controller,
diff --git a/arch/sh/configs/dreamcast_defconfig b/arch/sh/configs/dreamcast_defconfig
index 8b6b5a779de..3fdd270eecf 100644
--- a/arch/sh/configs/dreamcast_defconfig
+++ b/arch/sh/configs/dreamcast_defconfig
@@ -1,15 +1,23 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18
-# Tue Oct 3 10:51:55 2006
+# Linux kernel version: 2.6.22-rc4
+# Sat Jul 7 03:47:45 2007
#
CONFIG_SUPERH=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_SYS_SUPPORTS_PCI=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -28,6 +36,7 @@ CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
@@ -35,8 +44,10 @@ CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
@@ -50,14 +61,19 @@ CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
#
# Loadable module support
@@ -93,44 +109,9 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# System type
#
-# CONFIG_SH_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-# CONFIG_SH_7343_SOLUTION_ENGINE is not set
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_EC3104 is not set
-# CONFIG_SH_SATURN is not set
-CONFIG_SH_DREAMCAST=y
-# CONFIG_SH_BIGSUR is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_R7780RP is not set
-# CONFIG_SH_EDOSK7705 is not set
-# CONFIG_SH_SH4202_MICRODEV is not set
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
CONFIG_CPU_SH4=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
-
-#
-# SH-3 Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
# CONFIG_CPU_SUBTYPE_SH7300 is not set
# CONFIG_CPU_SUBTYPE_SH7705 is not set
# CONFIG_CPU_SUBTYPE_SH7706 is not set
@@ -138,79 +119,93 @@ CONFIG_CPU_SH4=y
# CONFIG_CPU_SUBTYPE_SH7708 is not set
# CONFIG_CPU_SUBTYPE_SH7709 is not set
# CONFIG_CPU_SUBTYPE_SH7710 is not set
-
-#
-# SH-4 Processor Support
-#
-CONFIG_CPU_SUBTYPE_SH7750=y
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
CONFIG_CPU_SUBTYPE_SH7091=y
-CONFIG_CPU_SUBTYPE_SH7750R=y
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
# CONFIG_CPU_SUBTYPE_SH7750S is not set
# CONFIG_CPU_SUBTYPE_SH7751 is not set
# CONFIG_CPU_SUBTYPE_SH7751R is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-
-#
-# ST40 Processor Support
-#
# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
# CONFIG_CPU_SUBTYPE_SH73180 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
#
# Memory management options
#
+CONFIG_QUICKLIST=y
CONFIG_MMU=y
CONFIG_PAGE_OFFSET=0x80000000
CONFIG_MEMORY_START=0x0c000000
CONFIG_MEMORY_SIZE=0x01000000
CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_HUGETLB_PAGE_SIZE_64K=y
+# CONFIG_HUGETLB_PAGE_SIZE_256K is not set
# CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_64MB is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_STATIC=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
#
# Cache configuration
#
# CONFIG_SH_DIRECT_MAPPED is not set
# CONFIG_SH_WRITETHROUGH is not set
-# CONFIG_SH_OCRAM is not set
#
# Processor features
#
CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_SH_FPU=y
# CONFIG_SH_DSP is not set
CONFIG_SH_STORE_QUEUES=y
CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_IPR_IRQ=y
CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_PTEA=y
#
-# Timer support
+# Board support
+#
+CONFIG_SH_DREAMCAST=y
+
+#
+# Timer and clock configuration
#
CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=16
CONFIG_SH_PCLK_FREQ=49876504
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
#
# CPU Frequency scaling
@@ -232,6 +227,7 @@ CONFIG_CPU_FREQ_GOV_USERSPACE=y
#
# DMA support
#
+CONFIG_SH_DMA_API=y
CONFIG_SH_DMA=y
CONFIG_NR_ONCHIP_DMA_CHANNELS=4
CONFIG_NR_DMA_CHANNELS_BOOL=y
@@ -240,17 +236,23 @@ CONFIG_NR_DMA_CHANNELS=9
#
# Companion Chips
#
-# CONFIG_HD6446X_SERIES is not set
+
+#
+# Additional SuperH Device Drivers
+#
+# CONFIG_HEARTBEAT is not set
+# CONFIG_PUSH_SWITCH is not set
#
# Kernel features
#
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_KEXEC is not set
-# CONFIG_SMP is not set
+# CONFIG_CRASH_DUMP is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
@@ -269,33 +271,23 @@ CONFIG_CMDLINE="console=ttySC1,115200 panic=3"
# Bus options
#
CONFIG_PCI=y
-# CONFIG_SH_PCIDMA_NONCOHERENT is not set
+CONFIG_SH_PCIDMA_NONCOHERENT=y
CONFIG_PCI_AUTO=y
-# CONFIG_PCI_MULTITHREAD_PROBE is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
# CONFIG_BINFMT_MISC is not set
#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
-#
# Networking
#
CONFIG_NET=y
@@ -303,13 +295,13 @@ CONFIG_NET=y
#
# Networking options
#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
@@ -327,30 +319,20 @@ CONFIG_IP_FIB_HASH=y
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
@@ -376,7 +358,16 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
#
# Device Drivers
@@ -394,10 +385,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
# CONFIG_MTD is not set
#
@@ -408,6 +395,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Plug and Play support
#
+# CONFIG_PNPACPI is not set
#
# Block devices
@@ -421,13 +409,16 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
#
-# ATA/ATAPI/MFM/RLL support
+# Misc devices
#
+# CONFIG_PHANTOM is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_BLINK is not set
# CONFIG_IDE is not set
#
@@ -436,10 +427,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
# CONFIG_ATA is not set
#
@@ -455,6 +442,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# IEEE 1394 (FireWire) support
#
+# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
#
@@ -470,15 +458,7 @@ CONFIG_NETDEVICES=y
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
# CONFIG_PHYLIB is not set
#
@@ -521,47 +501,16 @@ CONFIG_8139TOO=y
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-
-#
-# Token Ring devices
-#
+# CONFIG_SC92031 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
+# Wireless LAN
#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
@@ -604,17 +553,19 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_ATKBD is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
+# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
@@ -660,10 +611,6 @@ CONFIG_LEGACY_PTY_COUNT=256
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -680,14 +627,8 @@ CONFIG_SH_WDT=y
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
CONFIG_HW_RANDOM=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
@@ -695,11 +636,7 @@ CONFIG_HW_RANDOM=y
# TPM devices
#
# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
# CONFIG_I2C is not set
#
@@ -711,44 +648,51 @@ CONFIG_HW_RANDOM=y
#
# Dallas's 1-wire bus
#
+# CONFIG_W1 is not set
+# CONFIG_HWMON is not set
#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
+# Multifunction device drivers
#
+# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
#
-# Digital Video Broadcasting Devices
+# Graphics support
#
-# CONFIG_DVB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
-# Graphics support
+# Display device support
#
-CONFIG_FIRMWARE_EDID=y
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
@@ -763,13 +707,17 @@ CONFIG_FB_PVR2=y
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
# CONFIG_FB_VIRTUAL is not set
#
@@ -789,10 +737,6 @@ CONFIG_FONT_8x16=y
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
-
-#
-# Logo configuration
-#
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
@@ -800,7 +744,6 @@ CONFIG_LOGO=y
# CONFIG_LOGO_SUPERH_MONO is not set
# CONFIG_LOGO_SUPERH_VGA16 is not set
CONFIG_LOGO_SUPERH_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -808,6 +751,12 @@ CONFIG_LOGO_SUPERH_CLUT224=y
# CONFIG_SOUND is not set
#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
@@ -823,10 +772,6 @@ CONFIG_USB_ARCH_HAS_EHCI=y
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
# CONFIG_MMC is not set
#
@@ -874,10 +819,12 @@ CONFIG_USB_ARCH_HAS_EHCI=y
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
@@ -957,6 +904,11 @@ CONFIG_MSDOS_PARTITION=y
# CONFIG_NLS is not set
#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
# Profiling support
#
CONFIG_PROFILING=y
@@ -965,17 +917,18 @@ CONFIG_PROFILING=y
#
# Kernel hacking
#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_FS is not set
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_KGDB is not set
+# CONFIG_SH_KGDB is not set
#
# Security options
@@ -991,8 +944,13 @@ CONFIG_LOG_BUF_SHIFT=14
#
# Library routines
#
+CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/r7780mp_defconfig b/arch/sh/configs/r7780mp_defconfig
new file mode 100644
index 00000000000..17f7402b31d
--- /dev/null
+++ b/arch/sh/configs/r7780mp_defconfig
@@ -0,0 +1,1223 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.22-rc4
+# Mon Jun 11 10:24:57 2007
+#
+CONFIG_SUPERH=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+# CONFIG_FUTEX is not set
+CONFIG_ANON_INODES=y
+# CONFIG_EPOLL is not set
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+
+#
+# System type
+#
+CONFIG_CPU_SH4=y
+CONFIG_CPU_SH4A=y
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
+# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+CONFIG_CPU_SUBTYPE_SH7780=y
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+
+#
+# Memory management options
+#
+CONFIG_QUICKLIST=y
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_MEMORY_START=0x08000000
+CONFIG_MEMORY_SIZE=0x08000000
+# CONFIG_32BIT is not set
+CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_HUGETLB_PAGE_SIZE_64K=y
+# CONFIG_HUGETLB_PAGE_SIZE_256K is not set
+# CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_64MB is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+# CONFIG_SH_WRITETHROUGH is not set
+# CONFIG_SH_OCRAM is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_SH_FPU=y
+# CONFIG_SH_DSP is not set
+CONFIG_SH_STORE_QUEUES=y
+CONFIG_SPECULATIVE_EXECUTION=y
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_INTC2_IRQ=y
+CONFIG_CPU_HAS_SR_RB=y
+
+#
+# Board support
+#
+# CONFIG_SH_7780_SOLUTION_ENGINE is not set
+CONFIG_SH_HIGHLANDER=y
+# CONFIG_SH_R7780RP is not set
+CONFIG_SH_R7780MP=y
+# CONFIG_SH_R7785RP is not set
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=28
+CONFIG_SH_PCLK_FREQ=32000000
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+# CONFIG_HD6446X_SERIES is not set
+
+#
+# Additional SuperH Device Drivers
+#
+# CONFIG_HEARTBEAT is not set
+CONFIG_PUSH_SWITCH=y
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_KEXEC=y
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_SMP is not set
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_PREEMPT_BKL=y
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+# CONFIG_UBC_WAKEUP is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
+
+#
+# Bus options
+#
+CONFIG_PCI=y
+CONFIG_SH_PCIDMA_NONCOHERENT=y
+CONFIG_PCI_AUTO=y
+CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCI_DEBUG is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+CONFIG_BRIDGE=m
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNPACPI is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# Misc devices
+#
+# CONFIG_PHANTOM is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_BLINK is not set
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+CONFIG_SATA_SIL=y
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+CONFIG_PATA_PLATFORM=y
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_STNIC is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_PCI=y
+CONFIG_PCNET32=m
+# CONFIG_PCNET32_NAPI is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+CONFIG_8139CP=m
+CONFIG_8139TOO=m
+# CONFIG_8139TOO_PIO is not set
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+CONFIG_8139TOO_8129=y
+# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+CONFIG_VIA_RHINE=m
+CONFIG_VIA_RHINE_MMIO=y
+# CONFIG_VIA_RHINE_NAPI is not set
+# CONFIG_SC92031 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+CONFIG_E1000=m
+# CONFIG_E1000_NAPI is not set
+# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+CONFIG_R8169=y
+# CONFIG_R8169_NAPI is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+CONFIG_NETDEV_10000=y
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=2
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_FB is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=m
+
+#
+# Advanced Linux Sound Architecture
+#
+# CONFIG_SND is not set
+
+#
+# Open Sound System
+#
+CONFIG_SOUND_PRIME=m
+# CONFIG_OSS_OBSOLETE is not set
+# CONFIG_SOUND_TRIDENT is not set
+# CONFIG_SOUND_MSNDCLAS is not set
+# CONFIG_SOUND_MSNDPIN is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SH=y
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=y
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
+CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=m
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_TCP=y
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+CONFIG_NLS_CODEPAGE_932=y
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=m
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_FRAME_POINTER is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+CONFIG_SH_STANDARD_BIOS=y
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+CONFIG_EARLY_PRINTK=y
+# CONFIG_DEBUG_BOOTMEM is not set
+CONFIG_DEBUG_STACKOVERFLOW=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_4KSTACKS is not set
+# CONFIG_SH_KGDB is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/r7785rp_defconfig b/arch/sh/configs/r7785rp_defconfig
index 0f5ec649daf..5c29338532d 100644
--- a/arch/sh/configs/r7785rp_defconfig
+++ b/arch/sh/configs/r7785rp_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-rc3
-# Mon Mar 12 14:26:33 2007
+# Linux kernel version: 2.6.22-rc4
+# Thu Jul 12 12:33:15 2007
#
CONFIG_SUPERH=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
@@ -11,7 +11,9 @@ CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-# CONFIG_GENERIC_TIME is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_SYS_SUPPORTS_PCI=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
@@ -43,6 +45,7 @@ CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
@@ -60,13 +63,18 @@ CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
+CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
#
# Loadable module support
@@ -102,55 +110,11 @@ CONFIG_DEFAULT_IOSCHED="noop"
#
# System type
#
-# CONFIG_SH_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-# CONFIG_SH_7343_SOLUTION_ENGINE is not set
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-CONFIG_SH_HIGHLANDER=y
-# CONFIG_SH_EDOSK7705 is not set
-# CONFIG_SH_SH4202_MICRODEV is not set
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_7206_SOLUTION_ENGINE is not set
-# CONFIG_SH_7619_SOLUTION_ENGINE is not set
-# CONFIG_SH_UNKNOWN is not set
-# CONFIG_SH_R7780RP is not set
-# CONFIG_SH_R7780MP is not set
-CONFIG_SH_R7785RP=y
-
-#
-# Processor selection
-#
CONFIG_CPU_SH4=y
CONFIG_CPU_SH4A=y
CONFIG_CPU_SHX2=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
# CONFIG_CPU_SUBTYPE_SH7619 is not set
-
-#
-# SH-2A Processor Support
-#
# CONFIG_CPU_SUBTYPE_SH7206 is not set
-
-#
-# SH-3 Processor Support
-#
# CONFIG_CPU_SUBTYPE_SH7300 is not set
# CONFIG_CPU_SUBTYPE_SH7705 is not set
# CONFIG_CPU_SUBTYPE_SH7706 is not set
@@ -158,10 +122,7 @@ CONFIG_CPU_SHX2=y
# CONFIG_CPU_SUBTYPE_SH7708 is not set
# CONFIG_CPU_SUBTYPE_SH7709 is not set
# CONFIG_CPU_SUBTYPE_SH7710 is not set
-
-#
-# SH-4 Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
# CONFIG_CPU_SUBTYPE_SH7750 is not set
# CONFIG_CPU_SUBTYPE_SH7091 is not set
# CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -170,23 +131,12 @@ CONFIG_CPU_SHX2=y
# CONFIG_CPU_SUBTYPE_SH7751R is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-
-#
-# ST40 Processor Support
-#
# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_CPU_SUBTYPE_SH7785=y
-
-#
-# SH4AL-DSP Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
# CONFIG_CPU_SUBTYPE_SH73180 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
@@ -194,6 +144,7 @@ CONFIG_CPU_SUBTYPE_SH7785=y
#
# Memory management options
#
+CONFIG_QUICKLIST=y
CONFIG_MMU=y
CONFIG_PAGE_OFFSET=0x80000000
CONFIG_MEMORY_START=0x08000000
@@ -201,6 +152,12 @@ CONFIG_MEMORY_SIZE=0x08000000
CONFIG_32BIT=y
# CONFIG_X2TLB is not set
CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
@@ -215,17 +172,17 @@ CONFIG_FLATMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_STATIC=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
#
# Cache configuration
#
# CONFIG_SH_DIRECT_MAPPED is not set
# CONFIG_SH_WRITETHROUGH is not set
-# CONFIG_SH_OCRAM is not set
#
# Processor features
@@ -241,12 +198,22 @@ CONFIG_CPU_HAS_SR_RB=y
CONFIG_CPU_HAS_PTEA=y
#
+# Board support
+#
+CONFIG_SH_HIGHLANDER=y
+# CONFIG_SH_R7780RP is not set
+# CONFIG_SH_R7780MP is not set
+CONFIG_SH_R7785RP=y
+
+#
# Timer and clock configuration
#
CONFIG_SH_TMU=y
CONFIG_SH_TIMER_IRQ=28
-CONFIG_NO_IDLE_HZ=y
CONFIG_SH_PCLK_FREQ=50000000
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
#
# CPU Frequency scaling
@@ -261,7 +228,6 @@ CONFIG_SH_PCLK_FREQ=50000000
#
# Companion Chips
#
-# CONFIG_HD6446X_SERIES is not set
#
# Additional SuperH Device Drivers
@@ -278,7 +244,7 @@ CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_KEXEC=y
-# CONFIG_SMP is not set
+# CONFIG_CRASH_DUMP is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
@@ -300,31 +266,22 @@ CONFIG_PCI=y
CONFIG_SH_PCIDMA_NONCOHERENT=y
CONFIG_PCI_AUTO=y
CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCI_DEBUG is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
# CONFIG_BINFMT_MISC is not set
#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
-#
# Networking
#
CONFIG_NET=y
@@ -332,7 +289,6 @@ CONFIG_NET=y
#
# Networking options
#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -377,20 +333,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
CONFIG_BRIDGE=m
@@ -417,8 +361,16 @@ CONFIG_LLC=m
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
#
# Device Drivers
@@ -438,10 +390,6 @@ CONFIG_FW_LOADER=m
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
# CONFIG_MTD is not set
#
@@ -475,12 +423,10 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
#
# Misc devices
#
+# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_BLINK is not set
# CONFIG_IDE is not set
#
@@ -509,6 +455,7 @@ CONFIG_CHR_DEV_SG=m
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
@@ -554,10 +501,6 @@ CONFIG_CHR_DEV_SG=m
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
# CONFIG_SATA_AHCI is not set
@@ -580,6 +523,7 @@ CONFIG_SATA_SIL=y
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
@@ -629,6 +573,7 @@ CONFIG_PATA_PLATFORM=y
#
# IEEE 1394 (FireWire) support
#
+# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
#
@@ -644,15 +589,7 @@ CONFIG_NETDEVICES=y
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
# CONFIG_PHYLIB is not set
#
@@ -673,10 +610,7 @@ CONFIG_MII=y
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
+CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
@@ -689,55 +623,26 @@ CONFIG_R8169=y
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
+CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
-
-#
-# Token Ring devices
-#
+# CONFIG_MLX4_CORE is not set
# CONFIG_TR is not set
#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-# CONFIG_NET_WIRELESS_RTNETLINK is not set
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
-# CONFIG_HERMES is not set
-# CONFIG_ATMEL is not set
-
-#
-# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
-#
-# CONFIG_PRISM54 is not set
-# CONFIG_HOSTAP is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# Wan interfaces
+# Wireless LAN
#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
@@ -789,6 +694,7 @@ CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
@@ -831,14 +737,8 @@ CONFIG_LEGACY_PTY_COUNT=256
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_DRM is not set
@@ -848,10 +748,7 @@ CONFIG_HW_RANDOM=y
# TPM devices
#
# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
# CONFIG_I2C is not set
#
@@ -864,16 +761,15 @@ CONFIG_HW_RANDOM=y
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
@@ -885,22 +781,30 @@ CONFIG_HWMON=y
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
#
-# Digital Video Broadcasting Devices
+# Graphics support
#
-# CONFIG_DVB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
-# Graphics support
+# Display device support
#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
# CONFIG_FB_CFB_FILLRECT is not set
# CONFIG_FB_CFB_COPYAREA is not set
# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
@@ -908,7 +812,7 @@ CONFIG_FB=y
# CONFIG_FB_TILEBLITTING is not set
#
-# Frambuffer hardware drivers
+# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
@@ -930,12 +834,11 @@ CONFIG_FB=y
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
# CONFIG_FB_VIRTUAL is not set
-
-#
-# Logo configuration
-#
# CONFIG_LOGO is not set
#
@@ -952,13 +855,10 @@ CONFIG_SOUND=m
# Open Sound System
#
CONFIG_SOUND_PRIME=m
-# CONFIG_OBSOLETE_OSS is not set
-# CONFIG_SOUND_BT878 is not set
-# CONFIG_SOUND_ICH is not set
+# CONFIG_OSS_OBSOLETE is not set
# CONFIG_SOUND_TRIDENT is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
-# CONFIG_SOUND_VIA82CXXX is not set
#
# HID Devices
@@ -982,10 +882,6 @@ CONFIG_USB_ARCH_HAS_EHCI=y
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
# CONFIG_MMC is not set
#
@@ -1026,18 +922,30 @@ CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
#
-# RTC drivers
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
#
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_M48T86 is not set
-CONFIG_RTC_DRV_SH=y
-# CONFIG_RTC_DRV_TEST is not set
# CONFIG_RTC_DRV_V3020 is not set
#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SH=y
+
+#
# DMA Engine support
#
# CONFIG_DMA_ENGINE is not set
@@ -1051,14 +959,6 @@ CONFIG_RTC_DRV_SH=y
#
#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
-#
-
-#
# File systems
#
CONFIG_EXT2_FS=y
@@ -1157,6 +1057,7 @@ CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1239,7 +1140,6 @@ CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DETECT_SOFTLOCKUP is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
@@ -1266,6 +1166,7 @@ CONFIG_FORCED_INLINING=y
CONFIG_SH_STANDARD_BIOS=y
# CONFIG_EARLY_SCIF_CONSOLE is not set
CONFIG_EARLY_PRINTK=y
+# CONFIG_DEBUG_BOOTMEM is not set
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_4KSTACKS is not set
@@ -1300,6 +1201,7 @@ CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_BLOWFISH is not set
@@ -1328,7 +1230,9 @@ CONFIG_CRYPTO_DES=y
CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/se7206_defconfig b/arch/sh/configs/se7206_defconfig
index 87ab9080fd1..f2f2a3c9c32 100644
--- a/arch/sh/configs/se7206_defconfig
+++ b/arch/sh/configs/se7206_defconfig
@@ -1,18 +1,22 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.19
-# Wed Dec 6 14:40:15 2006
+# Linux kernel version: 2.6.22-rc4
+# Fri Jun 15 19:37:46 2007
#
CONFIG_SUPERH=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME is not set
+# CONFIG_GENERIC_CLOCKEVENTS is not set
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -34,8 +38,10 @@ CONFIG_LOCALVERSION=""
# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
@@ -48,12 +54,17 @@ CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
# CONFIG_BASE_FULL is not set
# CONFIG_FUTEX is not set
+CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
-CONFIG_SLAB=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
CONFIG_TINY_SHMEM=y
CONFIG_BASE_SMALL=1
-# CONFIG_SLOB is not set
#
# Loadable module support
@@ -83,53 +94,10 @@ CONFIG_DEFAULT_IOSCHED="noop"
#
# System type
#
-# CONFIG_SH_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-# CONFIG_SH_7343_SOLUTION_ENGINE is not set
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_EC3104 is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_BIGSUR is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_R7780RP is not set
-# CONFIG_SH_EDOSK7705 is not set
-# CONFIG_SH_SH4202_MICRODEV is not set
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-CONFIG_SH_7206_SOLUTION_ENGINE=y
-# CONFIG_SH_7619_SOLUTION_ENGINE is not set
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
CONFIG_CPU_SH2=y
CONFIG_CPU_SH2A=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
# CONFIG_CPU_SUBTYPE_SH7619 is not set
-
-#
-# SH-2A Processor Support
-#
CONFIG_CPU_SUBTYPE_SH7206=y
-
-#
-# SH-3 Processor Support
-#
# CONFIG_CPU_SUBTYPE_SH7300 is not set
# CONFIG_CPU_SUBTYPE_SH7705 is not set
# CONFIG_CPU_SUBTYPE_SH7706 is not set
@@ -137,10 +105,7 @@ CONFIG_CPU_SUBTYPE_SH7206=y
# CONFIG_CPU_SUBTYPE_SH7708 is not set
# CONFIG_CPU_SUBTYPE_SH7709 is not set
# CONFIG_CPU_SUBTYPE_SH7710 is not set
-
-#
-# SH-4 Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
# CONFIG_CPU_SUBTYPE_SH7750 is not set
# CONFIG_CPU_SUBTYPE_SH7091 is not set
# CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -149,32 +114,28 @@ CONFIG_CPU_SUBTYPE_SH7206=y
# CONFIG_CPU_SUBTYPE_SH7751R is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-
-#
-# ST40 Processor Support
-#
# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7785 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
# CONFIG_CPU_SUBTYPE_SH73180 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
#
# Memory management options
#
+CONFIG_QUICKLIST=y
CONFIG_PAGE_OFFSET=0x00000000
CONFIG_MEMORY_START=0x0c000000
CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
@@ -184,35 +145,42 @@ CONFIG_FLATMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_STATIC=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
#
# Cache configuration
#
# CONFIG_SH_DIRECT_MAPPED is not set
# CONFIG_SH_WRITETHROUGH is not set
-# CONFIG_SH_OCRAM is not set
#
# Processor features
#
# CONFIG_CPU_LITTLE_ENDIAN is not set
CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_SH_FPU is not set
# CONFIG_SH_FPU_EMU is not set
# CONFIG_SH_DSP is not set
+CONFIG_CPU_HAS_IPR_IRQ=y
+
+#
+# Board support
+#
+CONFIG_SOLUTION_ENGINE=y
+CONFIG_SH_7206_SOLUTION_ENGINE=y
#
-# Timer support
+# Timer and clock configuration
#
CONFIG_SH_CMT=y
# CONFIG_SH_MTU2 is not set
CONFIG_SH_TIMER_IRQ=140
-# CONFIG_NO_IDLE_HZ is not set
CONFIG_SH_PCLK_FREQ=33333333
CONFIG_SH_CLK_MD=6
+# CONFIG_TICK_ONESHOT is not set
#
# CPU Frequency scaling
@@ -227,11 +195,11 @@ CONFIG_SH_CLK_MD=6
#
# Companion Chips
#
-# CONFIG_HD6446X_SERIES is not set
#
# Additional SuperH Device Drivers
#
+# CONFIG_HEARTBEAT is not set
# CONFIG_PUSH_SWITCH is not set
#
@@ -239,10 +207,11 @@ CONFIG_SH_CLK_MD=6
#
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
# CONFIG_KEXEC is not set
-# CONFIG_SMP is not set
+# CONFIG_CRASH_DUMP is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
@@ -252,23 +221,18 @@ CONFIG_PREEMPT_NONE=y
#
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
-# CONFIG_UBC_WAKEUP is not set
# CONFIG_CMDLINE_BOOL is not set
#
# Bus options
#
-# CONFIG_PCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
#
# PCCARD (PCMCIA/CardBus) support
#
#
-# PCI Hotplug Support
-#
-
-#
# Executable file formats
#
CONFIG_BINFMT_FLAT=y
@@ -277,11 +241,6 @@ CONFIG_BINFMT_ZFLAT=y
# CONFIG_BINFMT_MISC is not set
#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
-#
# Networking
#
CONFIG_NET=y
@@ -289,7 +248,6 @@ CONFIG_NET=y
#
# Networking options
#
-# CONFIG_NETDEBUG is not set
# CONFIG_PACKET is not set
# CONFIG_UNIX is not set
# CONFIG_NET_KEY is not set
@@ -314,25 +272,14 @@ CONFIG_IP_FIB_HASH=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
@@ -358,7 +305,16 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
#
# Device Drivers
@@ -375,10 +331,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=y
@@ -393,6 +345,7 @@ CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
@@ -424,7 +377,6 @@ CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
#
# Mapping drivers for chip access
@@ -452,16 +404,13 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=4
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
#
-# OneNAND Flash Device Drivers
+# UBI - Unsorted block images
#
-# CONFIG_MTD_ONENAND is not set
+# CONFIG_MTD_UBI is not set
#
# Parallel port support
@@ -471,6 +420,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=4
#
# Plug and Play support
#
+# CONFIG_PNPACPI is not set
#
# Block devices
@@ -479,18 +429,13 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=4
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
#
# Misc devices
#
-# CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_BLINK is not set
# CONFIG_IDE is not set
#
@@ -499,10 +444,6 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=4
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
# CONFIG_ATA is not set
#
@@ -511,19 +452,6 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=4
# CONFIG_MD is not set
#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
# Network device support
#
CONFIG_NETDEVICES=y
@@ -531,10 +459,6 @@ CONFIG_NETDEVICES=y
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
# CONFIG_PHYLIB is not set
#
@@ -544,27 +468,14 @@ CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_STNIC is not set
CONFIG_SMC91X=y
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
+# Wireless LAN
#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
@@ -604,6 +515,7 @@ CONFIG_INPUT=y
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
@@ -639,29 +551,15 @@ CONFIG_SERIAL_CORE_CONSOLE=y
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
# CONFIG_I2C is not set
#
@@ -674,27 +572,30 @@ CONFIG_SERIAL_CORE_CONSOLE=y
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
+# CONFIG_HWMON is not set
#
-# Hardware Monitoring support
+# Multifunction device drivers
#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
#
-# Digital Video Broadcasting Devices
+# Graphics support
#
-# CONFIG_DVB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
-# Graphics support
+# Display device support
#
-# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
# CONFIG_FB is not set
#
@@ -703,6 +604,12 @@ CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SOUND is not set
#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
# USB support
#
# CONFIG_USB_ARCH_HAS_HCD is not set
@@ -717,10 +624,6 @@ CONFIG_SERIAL_CORE_CONSOLE=y
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
# CONFIG_MMC is not set
#
@@ -802,7 +705,6 @@ CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
# CONFIG_SYSFS is not set
# CONFIG_TMPFS is not set
-# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
@@ -816,7 +718,6 @@ CONFIG_RAMFS=y
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
@@ -849,6 +750,11 @@ CONFIG_MSDOS_PARTITION=y
# CONFIG_NLS is not set
#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
# Profiling support
#
# CONFIG_PROFILING is not set
@@ -861,14 +767,11 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_ENABLE_MUST_CHECK is not set
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_UNWIND_INFO is not set
-# CONFIG_HEADERS_CHECK is not set
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_KGDB is not set
#
# Security options
@@ -883,8 +786,13 @@ CONFIG_LOG_BUF_SHIFT=14
#
# Library routines
#
+CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/se7619_defconfig b/arch/sh/configs/se7619_defconfig
index 20ac7f4c53f..3a3c3c1f507 100644
--- a/arch/sh/configs/se7619_defconfig
+++ b/arch/sh/configs/se7619_defconfig
@@ -1,18 +1,22 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.19
-# Wed Dec 6 16:35:36 2006
+# Linux kernel version: 2.6.22-rc4
+# Fri Jun 15 19:43:06 2007
#
CONFIG_SUPERH=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME is not set
+# CONFIG_GENERIC_CLOCKEVENTS is not set
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -31,8 +35,10 @@ CONFIG_LOCALVERSION=""
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_UTS_NS is not set
# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
@@ -45,12 +51,17 @@ CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
# CONFIG_BASE_FULL is not set
# CONFIG_FUTEX is not set
+CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
-CONFIG_SLAB=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
CONFIG_TINY_SHMEM=y
CONFIG_BASE_SMALL=1
-# CONFIG_SLOB is not set
#
# Loadable module support
@@ -80,52 +91,9 @@ CONFIG_DEFAULT_IOSCHED="noop"
#
# System type
#
-# CONFIG_SH_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-# CONFIG_SH_7343_SOLUTION_ENGINE is not set
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_EC3104 is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_BIGSUR is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_R7780RP is not set
-# CONFIG_SH_EDOSK7705 is not set
-# CONFIG_SH_SH4202_MICRODEV is not set
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_7206_SOLUTION_ENGINE is not set
-CONFIG_SH_7619_SOLUTION_ENGINE=y
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
CONFIG_CPU_SH2=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
CONFIG_CPU_SUBTYPE_SH7619=y
-
-#
-# SH-2A Processor Support
-#
# CONFIG_CPU_SUBTYPE_SH7206 is not set
-
-#
-# SH-3 Processor Support
-#
# CONFIG_CPU_SUBTYPE_SH7300 is not set
# CONFIG_CPU_SUBTYPE_SH7705 is not set
# CONFIG_CPU_SUBTYPE_SH7706 is not set
@@ -133,10 +101,7 @@ CONFIG_CPU_SUBTYPE_SH7619=y
# CONFIG_CPU_SUBTYPE_SH7708 is not set
# CONFIG_CPU_SUBTYPE_SH7709 is not set
# CONFIG_CPU_SUBTYPE_SH7710 is not set
-
-#
-# SH-4 Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
# CONFIG_CPU_SUBTYPE_SH7750 is not set
# CONFIG_CPU_SUBTYPE_SH7091 is not set
# CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -145,32 +110,28 @@ CONFIG_CPU_SUBTYPE_SH7619=y
# CONFIG_CPU_SUBTYPE_SH7751R is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-
-#
-# ST40 Processor Support
-#
# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7785 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
# CONFIG_CPU_SUBTYPE_SH73180 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
#
# Memory management options
#
+CONFIG_QUICKLIST=y
CONFIG_PAGE_OFFSET=0x00000000
CONFIG_MEMORY_START=0x0c000000
CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
@@ -180,34 +141,41 @@ CONFIG_FLATMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_STATIC=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
#
# Cache configuration
#
# CONFIG_SH_DIRECT_MAPPED is not set
CONFIG_SH_WRITETHROUGH=y
-# CONFIG_SH_OCRAM is not set
#
# Processor features
#
# CONFIG_CPU_LITTLE_ENDIAN is not set
CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_SH_FPU is not set
# CONFIG_SH_FPU_EMU is not set
# CONFIG_SH_DSP is not set
+CONFIG_CPU_HAS_IPR_IRQ=y
+
+#
+# Board support
+#
+CONFIG_SOLUTION_ENGINE=y
+CONFIG_SH_7619_SOLUTION_ENGINE=y
#
-# Timer support
+# Timer and clock configuration
#
CONFIG_SH_CMT=y
CONFIG_SH_TIMER_IRQ=86
-# CONFIG_NO_IDLE_HZ is not set
CONFIG_SH_PCLK_FREQ=31250000
CONFIG_SH_CLK_MD=5
+# CONFIG_TICK_ONESHOT is not set
#
# CPU Frequency scaling
@@ -222,11 +190,11 @@ CONFIG_SH_CLK_MD=5
#
# Companion Chips
#
-# CONFIG_HD6446X_SERIES is not set
#
# Additional SuperH Device Drivers
#
+# CONFIG_HEARTBEAT is not set
# CONFIG_PUSH_SWITCH is not set
#
@@ -234,10 +202,11 @@ CONFIG_SH_CLK_MD=5
#
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
# CONFIG_KEXEC is not set
-# CONFIG_SMP is not set
+# CONFIG_CRASH_DUMP is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
@@ -247,23 +216,18 @@ CONFIG_PREEMPT_NONE=y
#
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
-# CONFIG_UBC_WAKEUP is not set
# CONFIG_CMDLINE_BOOL is not set
#
# Bus options
#
-# CONFIG_PCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
#
# PCCARD (PCMCIA/CardBus) support
#
#
-# PCI Hotplug Support
-#
-
-#
# Executable file formats
#
CONFIG_BINFMT_FLAT=y
@@ -272,11 +236,6 @@ CONFIG_BINFMT_ZFLAT=y
# CONFIG_BINFMT_MISC is not set
#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
-#
# Networking
#
# CONFIG_NET is not set
@@ -295,10 +254,6 @@ CONFIG_BINFMT_ZFLAT=y
#
# Connector - unified userspace <-> kernelspace linker
#
-
-#
-# Memory Technology Devices (MTD)
-#
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=y
@@ -313,6 +268,7 @@ CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
@@ -344,7 +300,6 @@ CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
#
# Mapping drivers for chip access
@@ -372,16 +327,13 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
#
-# OneNAND Flash Device Drivers
+# UBI - Unsorted block images
#
-# CONFIG_MTD_ONENAND is not set
+# CONFIG_MTD_UBI is not set
#
# Parallel port support
@@ -391,6 +343,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
#
# Plug and Play support
#
+# CONFIG_PNPACPI is not set
#
# Block devices
@@ -398,17 +351,12 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CDROM_PKTCDVD is not set
#
# Misc devices
#
-# CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_BLINK is not set
# CONFIG_IDE is not set
#
@@ -417,10 +365,6 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
# CONFIG_ATA is not set
#
@@ -429,19 +373,6 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
# CONFIG_MD is not set
#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
# ISDN subsystem
#
@@ -471,6 +402,7 @@ CONFIG_INPUT=y
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
@@ -506,29 +438,15 @@ CONFIG_SERIAL_CORE_CONSOLE=y
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
# CONFIG_I2C is not set
#
@@ -541,26 +459,29 @@ CONFIG_SERIAL_CORE_CONSOLE=y
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
+# CONFIG_HWMON is not set
#
-# Hardware Monitoring support
+# Multifunction device drivers
#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_DAB=y
#
-# Digital Video Broadcasting Devices
+# Graphics support
#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
-# Graphics support
+# Display device support
#
-# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
# CONFIG_FB is not set
#
@@ -569,6 +490,12 @@ CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SOUND is not set
#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
# USB support
#
# CONFIG_USB_ARCH_HAS_HCD is not set
@@ -583,10 +510,6 @@ CONFIG_SERIAL_CORE_CONSOLE=y
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
# CONFIG_MMC is not set
#
@@ -668,7 +591,6 @@ CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
# CONFIG_SYSFS is not set
# CONFIG_TMPFS is not set
-# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
@@ -682,7 +604,6 @@ CONFIG_RAMFS=y
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
@@ -715,14 +636,11 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_ENABLE_MUST_CHECK is not set
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_UNWIND_INFO is not set
-# CONFIG_HEADERS_CHECK is not set
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_KGDB is not set
#
# Security options
@@ -737,8 +655,13 @@ CONFIG_LOG_BUF_SHIFT=14
#
# Library routines
#
+CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/se7722_defconfig b/arch/sh/configs/se7722_defconfig
index ca4c663dfa3..764b813c405 100644
--- a/arch/sh/configs/se7722_defconfig
+++ b/arch/sh/configs/se7722_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-rc7
-# Fri Apr 27 16:30:30 2007
+# Linux kernel version: 2.6.22-rc4
+# Wed Jun 20 18:08:04 2007
#
CONFIG_SUPERH=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
@@ -11,7 +11,9 @@ CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-# CONFIG_GENERIC_TIME is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_SYS_SUPPORTS_NUMA=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
@@ -43,6 +45,7 @@ CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
@@ -60,14 +63,20 @@ CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
#
# Loadable module support
@@ -103,57 +112,12 @@ CONFIG_DEFAULT_IOSCHED="noop"
#
# System type
#
-CONFIG_SOLUTION_ENGINE=y
-# CONFIG_SH_SOLUTION_ENGINE is not set
-CONFIG_SH_7722_SOLUTION_ENGINE=y
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-# CONFIG_SH_7780_SOLUTION_ENGINE is not set
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-# CONFIG_SH_7343_SOLUTION_ENGINE is not set
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_HIGHLANDER is not set
-# CONFIG_SH_EDOSK7705 is not set
-# CONFIG_SH_SH4202_MICRODEV is not set
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_7206_SOLUTION_ENGINE is not set
-# CONFIG_SH_7619_SOLUTION_ENGINE is not set
-# CONFIG_SH_LBOX_RE2 is not set
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
CONFIG_CPU_SH4=y
CONFIG_CPU_SH4A=y
CONFIG_CPU_SH4AL_DSP=y
CONFIG_CPU_SHX2=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
# CONFIG_CPU_SUBTYPE_SH7619 is not set
-
-#
-# SH-2A Processor Support
-#
# CONFIG_CPU_SUBTYPE_SH7206 is not set
-
-#
-# SH-3 Processor Support
-#
# CONFIG_CPU_SUBTYPE_SH7300 is not set
# CONFIG_CPU_SUBTYPE_SH7705 is not set
# CONFIG_CPU_SUBTYPE_SH7706 is not set
@@ -162,10 +126,6 @@ CONFIG_CPU_SHX2=y
# CONFIG_CPU_SUBTYPE_SH7709 is not set
# CONFIG_CPU_SUBTYPE_SH7710 is not set
# CONFIG_CPU_SUBTYPE_SH7712 is not set
-
-#
-# SH-4 Processor Support
-#
# CONFIG_CPU_SUBTYPE_SH7750 is not set
# CONFIG_CPU_SUBTYPE_SH7091 is not set
# CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -174,23 +134,11 @@ CONFIG_CPU_SHX2=y
# CONFIG_CPU_SUBTYPE_SH7751R is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-
-#
-# ST40 Processor Support
-#
# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7785 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
# CONFIG_CPU_SUBTYPE_SH73180 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
CONFIG_CPU_SUBTYPE_SH7722=y
@@ -198,15 +146,21 @@ CONFIG_CPU_SUBTYPE_SH7722=y
#
# Memory management options
#
+CONFIG_QUICKLIST=y
CONFIG_MMU=y
CONFIG_PAGE_OFFSET=0x80000000
CONFIG_MEMORY_START=0x0c000000
CONFIG_MEMORY_SIZE=0x04000000
-# CONFIG_32BIT is not set
# CONFIG_X2TLB is not set
CONFIG_VSYSCALL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_NUMA=y
+CONFIG_NODES_SHIFT=1
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=2
CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
@@ -216,26 +170,25 @@ CONFIG_HUGETLB_PAGE_SIZE_64K=y
# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set
# CONFIG_HUGETLB_PAGE_SIZE_64MB is not set
CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
+# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_NEED_MULTIPLE_NODES=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
#
# Cache configuration
#
# CONFIG_SH_DIRECT_MAPPED is not set
# CONFIG_SH_WRITETHROUGH is not set
-# CONFIG_SH_OCRAM is not set
-CONFIG_CF_ENABLER=y
-# CONFIG_CF_AREA5 is not set
-CONFIG_CF_AREA6=y
-CONFIG_CF_BASE_ADDR=0xb8000000
#
# Processor features
@@ -252,12 +205,20 @@ CONFIG_CPU_HAS_SR_RB=y
CONFIG_CPU_HAS_PTEA=y
#
+# Board support
+#
+CONFIG_SOLUTION_ENGINE=y
+CONFIG_SH_7722_SOLUTION_ENGINE=y
+
+#
# Timer and clock configuration
#
CONFIG_SH_TMU=y
CONFIG_SH_TIMER_IRQ=16
-CONFIG_NO_IDLE_HZ=y
CONFIG_SH_PCLK_FREQ=33333333
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
#
# CPU Frequency scaling
@@ -272,7 +233,6 @@ CONFIG_SH_PCLK_FREQ=33333333
#
# Companion Chips
#
-# CONFIG_HD6446X_SERIES is not set
#
# Additional SuperH Device Drivers
@@ -290,7 +250,6 @@ CONFIG_HZ_250=y
CONFIG_HZ=250
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
-# CONFIG_SMP is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
@@ -307,7 +266,11 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000
#
# Bus options
#
-# CONFIG_PCI is not set
+CONFIG_CF_ENABLER=y
+# CONFIG_CF_AREA5 is not set
+CONFIG_CF_AREA6=y
+CONFIG_CF_BASE_ADDR=0xb8000000
+# CONFIG_ARCH_SUPPORTS_MSI is not set
#
# PCCARD (PCMCIA/CardBus) support
@@ -315,22 +278,12 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000
# CONFIG_PCCARD is not set
#
-# PCI Hotplug Support
-#
-
-#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
# CONFIG_BINFMT_MISC is not set
#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
-#
# Networking
#
CONFIG_NET=y
@@ -338,7 +291,6 @@ CONFIG_NET=y
#
# Networking options
#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
@@ -375,20 +327,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
@@ -414,7 +354,16 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
#
# Device Drivers
@@ -432,10 +381,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
# CONFIG_MTD is not set
#
@@ -464,10 +409,7 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
#
# Misc devices
#
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_BLINK is not set
# CONFIG_IDE is not set
#
@@ -496,6 +438,7 @@ CONFIG_BLK_DEV_SD=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
@@ -511,10 +454,6 @@ CONFIG_BLK_DEV_SD=y
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_DEBUG is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_PATA_PLATFORM=y
@@ -525,19 +464,6 @@ CONFIG_PATA_PLATFORM=y
# CONFIG_MD is not set
#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
# Network device support
#
CONFIG_NETDEVICES=y
@@ -545,10 +471,6 @@ CONFIG_NETDEVICES=y
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
# CONFIG_PHYLIB is not set
#
@@ -558,27 +480,14 @@ CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_STNIC is not set
CONFIG_SMC91X=y
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
+# Wireless LAN
#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
@@ -627,6 +536,7 @@ CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
@@ -667,14 +577,8 @@ CONFIG_LEGACY_PTY_COUNT=256
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
@@ -682,10 +586,6 @@ CONFIG_HW_RANDOM=y
# TPM devices
#
# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
# CONFIG_I2C is not set
#
@@ -698,16 +598,15 @@ CONFIG_HW_RANDOM=y
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
@@ -719,16 +618,19 @@ CONFIG_HWMON=y
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
#
-# Digital Video Broadcasting Devices
+# Graphics support
#
-# CONFIG_DVB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
-# Graphics support
+# Display device support
#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
# CONFIG_FB is not set
#
@@ -757,10 +659,6 @@ CONFIG_HID=y
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
# CONFIG_MMC is not set
#
@@ -800,18 +698,30 @@ CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
#
-# RTC drivers
+# I2C RTC drivers
+#
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
#
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_M48T86 is not set
-CONFIG_RTC_DRV_SH=y
-# CONFIG_RTC_DRV_TEST is not set
# CONFIG_RTC_DRV_V3020 is not set
#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SH=y
+
+#
# DMA Engine support
#
# CONFIG_DMA_ENGINE is not set
@@ -825,14 +735,6 @@ CONFIG_RTC_DRV_SH=y
#
#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
-#
-
-#
# File systems
#
CONFIG_EXT2_FS=y
@@ -937,23 +839,24 @@ CONFIG_MSDOS_PARTITION=y
#
# Profiling support
#
-# CONFIG_PROFILING is not set
+CONFIG_PROFILING=y
+# CONFIG_OPROFILE is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
+CONFIG_PRINTK_TIME=y
# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_SH_STANDARD_BIOS is not set
+CONFIG_SH_STANDARD_BIOS=y
# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_EARLY_PRINTK is not set
# CONFIG_SH_KGDB is not set
#
@@ -973,8 +876,10 @@ CONFIG_LOG_BUF_SHIFT=14
CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/shx3_defconfig b/arch/sh/configs/shx3_defconfig
new file mode 100644
index 00000000000..219bad558b1
--- /dev/null
+++ b/arch/sh/configs/shx3_defconfig
@@ -0,0 +1,756 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.22-rc4
+# Wed Jun 20 14:09:27 2007
+#
+CONFIG_SUPERH=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_UTS_NS is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+
+#
+# System type
+#
+CONFIG_CPU_SH4=y
+CONFIG_CPU_SH4A=y
+CONFIG_CPU_SHX3=y
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
+# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+CONFIG_CPU_SUBTYPE_SHX3=y
+# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+
+#
+# Memory management options
+#
+CONFIG_QUICKLIST=y
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_HUGETLB_PAGE_SIZE_64K=y
+# CONFIG_HUGETLB_PAGE_SIZE_256K is not set
+# CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_64MB is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+# CONFIG_SH_WRITETHROUGH is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+# CONFIG_SH_FPU is not set
+# CONFIG_SH_FPU_EMU is not set
+CONFIG_SH_DSP=y
+CONFIG_SH_STORE_QUEUES=y
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_INTC2_IRQ=y
+CONFIG_CPU_HAS_SR_RB=y
+
+#
+# Board support
+#
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=16
+CONFIG_SH_PCLK_FREQ=50000000
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+
+#
+# Additional SuperH Device Drivers
+#
+CONFIG_HEARTBEAT=y
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_KEXEC=y
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_PREEMPT_BKL=y
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+# CONFIG_UBC_WAKEUP is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttySC0,115200 ip=192.168.1.2:::255.255.255.0 root=/dev/nfs nfsroot=192.168.1.1:/exports/devel/rfs/mobiler noaliencache earlyprintk=bios ignore_loglevel"
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Networking
+#
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNPACPI is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# Misc devices
+#
+# CONFIG_BLINK is not set
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_PATA_PLATFORM=y
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# ISDN subsystem
+#
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=2
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+# CONFIG_HWMON is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_FB is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# HID Devices
+#
+# CONFIG_HID is not set
+
+#
+# USB support
+#
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# InfiniBand support
+#
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SH=y
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Profiling support
+#
+CONFIG_PROFILING=y
+# CONFIG_OPROFILE is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_PRINTK_TIME=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+CONFIG_DEBUG_SLAB=y
+CONFIG_DEBUG_SLAB_LEAK=y
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_LOCK_ALLOC=y
+# CONFIG_PROVE_LOCKING is not set
+CONFIG_LOCKDEP=y
+CONFIG_DEBUG_LOCKDEP=y
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+CONFIG_DEBUG_VM=y
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+CONFIG_SH_STANDARD_BIOS=y
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+CONFIG_EARLY_PRINTK=y
+# CONFIG_DEBUG_BOOTMEM is not set
+CONFIG_DEBUG_STACKOVERFLOW=y
+CONFIG_DEBUG_STACK_USAGE=y
+# CONFIG_4KSTACKS is not set
+# CONFIG_SH_KGDB is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/drivers/dma/Kconfig b/arch/sh/drivers/dma/Kconfig
index 99935f9daf4..333898077c7 100644
--- a/arch/sh/drivers/dma/Kconfig
+++ b/arch/sh/drivers/dma/Kconfig
@@ -36,23 +36,6 @@ config NR_DMA_CHANNELS
support. Setting this to a higher value allows for cascading DMACs
with additional channels.
-config DMA_PAGE_OPS
- bool "Use DMAC for page copy/clear"
- depends on SH_DMA && BROKEN
- help
- Selecting this option will use a dual-address mode configured channel
- in the SH DMAC for copy_page()/clear_page(). Primarily a performance
- hack.
-
-config DMA_PAGE_OPS_CHANNEL
- depends on DMA_PAGE_OPS
- int "DMA channel for sh memory-manager page copy/clear"
- default "3"
- help
- This allows the specification of the dual address dma channel,
- in case channel 3 is unavailable. On the SH4, channels 1,2, and 3
- are dual-address capable.
-
config SH_DMABRG
bool "SH7760 DMABRG support"
depends on CPU_SUBTYPE_SH7760
diff --git a/arch/sh/drivers/pci/Kconfig b/arch/sh/drivers/pci/Kconfig
index 6d1cbbe6745..fbc6f2c8649 100644
--- a/arch/sh/drivers/pci/Kconfig
+++ b/arch/sh/drivers/pci/Kconfig
@@ -1,5 +1,6 @@
config PCI
bool "PCI support"
+ depends on SYS_SUPPORTS_PCI
help
Find out whether you have a PCI motherboard. PCI is the name of a
bus system, i.e. the way the CPU talks to the other stuff inside
diff --git a/arch/sh/kernel/Makefile b/arch/sh/kernel/Makefile
index 9104b625764..1f141a8ba17 100644
--- a/arch/sh/kernel/Makefile
+++ b/arch/sh/kernel/Makefile
@@ -4,10 +4,9 @@
extra-y := head.o init_task.o vmlinux.lds
-obj-y := process.o signal.o traps.o irq.o \
- ptrace.o setup.o time.o sys_sh.o semaphore.o \
- io.o io_generic.o sh_ksyms.o syscalls.o \
- debugtraps.o
+obj-y := debugtraps.o io.o io_generic.o irq.o machvec.o process.o ptrace.o \
+ semaphore.o setup.o signal.o sys_sh.o syscalls.o \
+ time.o topology.o traps.o
obj-y += cpu/ timers/
obj-$(CONFIG_VSYSCALL) += vsyscall/
@@ -17,7 +16,7 @@ obj-$(CONFIG_CF_ENABLER) += cf-enabler.o
obj-$(CONFIG_SH_STANDARD_BIOS) += sh_bios.o
obj-$(CONFIG_SH_KGDB) += kgdb_stub.o kgdb_jmp.o
obj-$(CONFIG_SH_CPU_FREQ) += cpufreq.o
-obj-$(CONFIG_MODULES) += module.o
+obj-$(CONFIG_MODULES) += sh_ksyms.o module.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o
obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
diff --git a/arch/sh/kernel/cf-enabler.c b/arch/sh/kernel/cf-enabler.c
index ebc73b85094..1c3b99642e1 100644
--- a/arch/sh/kernel/cf-enabler.c
+++ b/arch/sh/kernel/cf-enabler.c
@@ -75,11 +75,7 @@ static int __init cf_init_default(void)
#if defined(CONFIG_CPU_SH4)
allocate_cf_area();
#endif
-#if defined(CONFIG_SH_UNKNOWN)
- /* This should be done in each board's init_xxx_irq. */
- make_imask_irq(14);
- disable_irq(14);
-#endif
+
return 0;
}
diff --git a/arch/sh/kernel/cpu/init.c b/arch/sh/kernel/cpu/init.c
index 6451ad63017..9172e97dc26 100644
--- a/arch/sh/kernel/cpu/init.c
+++ b/arch/sh/kernel/cpu/init.c
@@ -21,8 +21,7 @@
#include <asm/cacheflush.h>
#include <asm/cache.h>
#include <asm/io.h>
-
-extern void detect_cpu_and_cache_system(void);
+#include <asm/ubc.h>
/*
* Generic wrapper for command line arguments to disable on-chip
@@ -152,15 +151,6 @@ static void __init cache_init(void)
flags |= CCR_CACHE_CB;
#endif
-#ifdef CONFIG_SH_OCRAM
- /* Turn on OCRAM -- halve the OC */
- flags |= CCR_CACHE_ORA;
- current_cpu_data.dcache.sets >>= 1;
-
- current_cpu_data.dcache.way_size = current_cpu_data.dcache.sets *
- current_cpu_data.dcache.linesz;
-#endif
-
ctrl_outl(flags, CCR);
back_to_P1();
}
@@ -269,7 +259,6 @@ asmlinkage void __init sh_cpu_init(void)
}
#endif
-#ifdef CONFIG_UBC_WAKEUP
/*
* Some brain-damaged loaders decided it would be a good idea to put
* the UBC to sleep. This causes some issues when it comes to things
@@ -277,7 +266,5 @@ asmlinkage void __init sh_cpu_init(void)
* we wake it up and hope that all is well.
*/
ubc_wakeup();
-#endif
-
speculative_execution_init();
}
diff --git a/arch/sh/kernel/cpu/irq/intc2.c b/arch/sh/kernel/cpu/irq/intc2.c
index d8e22f4ff0f..cc5221390e0 100644
--- a/arch/sh/kernel/cpu/irq/intc2.c
+++ b/arch/sh/kernel/cpu/irq/intc2.c
@@ -13,36 +13,31 @@
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/io.h>
+#include <asm/smp.h>
-#if defined(CONFIG_CPU_SUBTYPE_SH7760)
-#define INTC2_BASE 0xfe080000
-#define INTC2_INTMSK (INTC2_BASE + 0x40)
-#define INTC2_INTMSKCLR (INTC2_BASE + 0x60)
-#elif defined(CONFIG_CPU_SUBTYPE_SH7780) || \
- defined(CONFIG_CPU_SUBTYPE_SH7785)
-#define INTC2_BASE 0xffd40000
-#define INTC2_INTMSK (INTC2_BASE + 0x38)
-#define INTC2_INTMSKCLR (INTC2_BASE + 0x3c)
-#endif
+static inline struct intc2_desc *get_intc2_desc(unsigned int irq)
+{
+ struct irq_chip *chip = get_irq_chip(irq);
+ return (void *)((char *)chip - offsetof(struct intc2_desc, chip));
+}
static void disable_intc2_irq(unsigned int irq)
{
struct intc2_data *p = get_irq_chip_data(irq);
- ctrl_outl(1 << p->msk_shift, INTC2_INTMSK + p->msk_offset);
+ struct intc2_desc *d = get_intc2_desc(irq);
+
+ ctrl_outl(1 << p->msk_shift, d->msk_base + p->msk_offset +
+ (hard_smp_processor_id() * 4));
}
static void enable_intc2_irq(unsigned int irq)
{
struct intc2_data *p = get_irq_chip_data(irq);
- ctrl_outl(1 << p->msk_shift, INTC2_INTMSKCLR + p->msk_offset);
-}
+ struct intc2_desc *d = get_intc2_desc(irq);
-static struct irq_chip intc2_irq_chip = {
- .name = "INTC2",
- .mask = disable_intc2_irq,
- .unmask = enable_intc2_irq,
- .mask_ack = disable_intc2_irq,
-};
+ ctrl_outl(1 << p->msk_shift, d->mskclr_base + p->msk_offset +
+ (hard_smp_processor_id() * 4));
+}
/*
* Setup an INTC2 style interrupt.
@@ -56,30 +51,36 @@ static struct irq_chip intc2_irq_chip = {
*
* in the intc2_data table.
*/
-void make_intc2_irq(struct intc2_data *table, unsigned int nr_irqs)
+void register_intc2_controller(struct intc2_desc *desc)
{
int i;
- for (i = 0; i < nr_irqs; i++) {
+ desc->chip.mask = disable_intc2_irq;
+ desc->chip.unmask = enable_intc2_irq;
+ desc->chip.mask_ack = disable_intc2_irq;
+
+ for (i = 0; i < desc->nr_irqs; i++) {
unsigned long ipr, flags;
- struct intc2_data *p = table + i;
+ struct intc2_data *p = desc->intc2_data + i;
disable_irq_nosync(p->irq);
- /* Set the priority level */
- local_irq_save(flags);
+ if (desc->prio_base) {
+ /* Set the priority level */
+ local_irq_save(flags);
- ipr = ctrl_inl(INTC2_BASE + p->ipr_offset);
- ipr &= ~(0xf << p->ipr_shift);
- ipr |= p->priority << p->ipr_shift;
- ctrl_outl(ipr, INTC2_BASE + p->ipr_offset);
+ ipr = ctrl_inl(desc->prio_base + p->ipr_offset);
+ ipr &= ~(0xf << p->ipr_shift);
+ ipr |= p->priority << p->ipr_shift;
+ ctrl_outl(ipr, desc->prio_base + p->ipr_offset);
- local_irq_restore(flags);
+ local_irq_restore(flags);
+ }
- set_irq_chip_and_handler_name(p->irq, &intc2_irq_chip,
+ set_irq_chip_and_handler_name(p->irq, &desc->chip,
handle_level_irq, "level");
set_irq_chip_data(p->irq, p);
- enable_intc2_irq(p->irq);
+ disable_intc2_irq(p->irq);
}
}
diff --git a/arch/sh/kernel/cpu/irq/ipr.c b/arch/sh/kernel/cpu/irq/ipr.c
index 210280b6fdd..98e84f40c71 100644
--- a/arch/sh/kernel/cpu/irq/ipr.c
+++ b/arch/sh/kernel/cpu/irq/ipr.c
@@ -22,58 +22,57 @@
#include <linux/io.h>
#include <linux/interrupt.h>
+static inline struct ipr_desc *get_ipr_desc(unsigned int irq)
+{
+ struct irq_chip *chip = get_irq_chip(irq);
+ return (void *)((char *)chip - offsetof(struct ipr_desc, chip));
+}
+
static void disable_ipr_irq(unsigned int irq)
{
struct ipr_data *p = get_irq_chip_data(irq);
+ unsigned long addr = get_ipr_desc(irq)->ipr_offsets[p->ipr_idx];
/* Set the priority in IPR to 0 */
- ctrl_outw(ctrl_inw(p->addr) & (0xffff ^ (0xf << p->shift)), p->addr);
+ ctrl_outw(ctrl_inw(addr) & (0xffff ^ (0xf << p->shift)), addr);
}
static void enable_ipr_irq(unsigned int irq)
{
struct ipr_data *p = get_irq_chip_data(irq);
+ unsigned long addr = get_ipr_desc(irq)->ipr_offsets[p->ipr_idx];
/* Set priority in IPR back to original value */
- ctrl_outw(ctrl_inw(p->addr) | (p->priority << p->shift), p->addr);
+ ctrl_outw(ctrl_inw(addr) | (p->priority << p->shift), addr);
}
-static struct irq_chip ipr_irq_chip = {
- .name = "IPR",
- .mask = disable_ipr_irq,
- .unmask = enable_ipr_irq,
- .mask_ack = disable_ipr_irq,
-};
-
-unsigned int map_ipridx_to_addr(int idx) __attribute__ ((weak));
-unsigned int map_ipridx_to_addr(int idx)
-{
- return 0;
-}
+/*
+ * The shift value is now the number of bits to shift, not the number of
+ * bits/4. This is to make it easier to read the value directly from the
+ * datasheets. The IPR address is calculated using the ipr_offset table.
+ */
-void make_ipr_irq(struct ipr_data *table, unsigned int nr_irqs)
+void register_ipr_controller(struct ipr_desc *desc)
{
int i;
- for (i = 0; i < nr_irqs; i++) {
- unsigned int irq = table[i].irq;
+ desc->chip.mask = disable_ipr_irq;
+ desc->chip.unmask = enable_ipr_irq;
+ desc->chip.mask_ack = disable_ipr_irq;
- if (!irq)
- irq = table[i].irq = i;
+ for (i = 0; i < desc->nr_irqs; i++) {
+ struct ipr_data *p = desc->ipr_data + i;
- /* could the IPR index be mapped, if not we ignore this */
- if (!table[i].addr) {
- table[i].addr = map_ipridx_to_addr(table[i].ipr_idx);
- if (!table[i].addr)
- continue;
- }
+ BUG_ON(p->ipr_idx >= desc->nr_offsets);
+ BUG_ON(!desc->ipr_offsets[p->ipr_idx]);
- disable_irq_nosync(irq);
- set_irq_chip_and_handler_name(irq, &ipr_irq_chip,
+ disable_irq_nosync(p->irq);
+ set_irq_chip_and_handler_name(p->irq, &desc->chip,
handle_level_irq, "level");
- set_irq_chip_data(irq, &table[i]);
- enable_ipr_irq(irq);
+ set_irq_chip_data(p->irq, p);
+ disable_ipr_irq(p->irq);
}
}
-EXPORT_SYMBOL(make_ipr_irq);
+
+EXPORT_SYMBOL(register_ipr_controller);
#if !defined(CONFIG_CPU_HAS_PINT_IRQ)
int ipr_irq_demux(int irq)
diff --git a/arch/sh/kernel/cpu/sh2/entry.S b/arch/sh/kernel/cpu/sh2/entry.S
index c16dc8fec48..ee8f1fe84b0 100644
--- a/arch/sh/kernel/cpu/sh2/entry.S
+++ b/arch/sh/kernel/cpu/sh2/entry.S
@@ -311,6 +311,7 @@ restore_all:
rte
nop
+ .align 2
#ifdef CONFIG_TRACE_IRQFLAGS
1: .long trace_hardirqs_off
#endif
diff --git a/arch/sh/kernel/cpu/sh2/probe.c b/arch/sh/kernel/cpu/sh2/probe.c
index 108e81b682e..abbf17427e5 100644
--- a/arch/sh/kernel/cpu/sh2/probe.c
+++ b/arch/sh/kernel/cpu/sh2/probe.c
@@ -9,23 +9,14 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
-
-
#include <linux/init.h>
+#include <linux/smp.h>
#include <asm/processor.h>
#include <asm/cache.h>
int __init detect_cpu_and_cache_system(void)
{
-#if defined(CONFIG_CPU_SUBTYPE_SH7604)
- current_cpu_data.type = CPU_SH7604;
- current_cpu_data.dcache.ways = 4;
- current_cpu_data.dcache.way_incr = (1<<10);
- current_cpu_data.dcache.sets = 64;
- current_cpu_data.dcache.entry_shift = 4;
- current_cpu_data.dcache.linesz = L1_CACHE_BYTES;
- current_cpu_data.dcache.flags = 0;
-#elif defined(CONFIG_CPU_SUBTYPE_SH7619)
+#if defined(CONFIG_CPU_SUBTYPE_SH7619)
current_cpu_data.type = CPU_SH7619;
current_cpu_data.dcache.ways = 4;
current_cpu_data.dcache.way_incr = (1<<12);
diff --git a/arch/sh/kernel/cpu/sh2/setup-sh7619.c b/arch/sh/kernel/cpu/sh2/setup-sh7619.c
index f83ff8a68f3..1a107fe22dd 100644
--- a/arch/sh/kernel/cpu/sh2/setup-sh7619.c
+++ b/arch/sh/kernel/cpu/sh2/setup-sh7619.c
@@ -52,7 +52,7 @@ static int __init sh7619_devices_setup(void)
}
__initcall(sh7619_devices_setup);
-static struct ipr_data sh7619_ipr_map[] = {
+static struct ipr_data ipr_irq_table[] = {
{ 86, 0, 4, 2 }, /* CMI0 */
{ 88, 1, 12, 3 }, /* SCIF0_ERI */
{ 89, 1, 12, 3 }, /* SCIF0_RXI */
@@ -68,7 +68,7 @@ static struct ipr_data sh7619_ipr_map[] = {
{ 99, 1, 4, 3 }, /* SCIF2_TXI */
};
-static unsigned int ipr_offsets[] = {
+static unsigned long ipr_offsets[] = {
0xf8080000, /* IPRC */
0xf8080002, /* IPRD */
0xf8080004, /* IPRE */
@@ -76,15 +76,19 @@ static unsigned int ipr_offsets[] = {
0xf8080008, /* IPRG */
};
-/* given the IPR index return the address of the IPR register */
-unsigned int map_ipridx_to_addr(int idx)
-{
- if (unlikely(idx >= ARRAY_SIZE(ipr_offsets)))
- return 0;
- return ipr_offsets[idx];
-}
+static struct ipr_desc ipr_irq_desc = {
+ .ipr_offsets = ipr_offsets,
+ .nr_offsets = ARRAY_SIZE(ipr_offsets),
+
+ .ipr_data = ipr_irq_table,
+ .nr_irqs = ARRAY_SIZE(ipr_irq_table),
+
+ .chip = {
+ .name = "IPR-sh7619",
+ },
+};
void __init init_IRQ_ipr(void)
{
- make_ipr_irq(sh7619_ipr_map, ARRAY_SIZE(sh7619_ipr_map));
+ register_ipr_controller(&ipr_irq_desc);
}
diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c
index 4ed9110632b..b6e3a6351fa 100644
--- a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c
+++ b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c
@@ -57,7 +57,7 @@ static int __init sh7206_devices_setup(void)
}
__initcall(sh7206_devices_setup);
-static struct ipr_data sh7206_ipr_map[] = {
+static struct ipr_data ipr_irq_table[] = {
{ 140, 7, 12, 2 }, /* CMI0 */
{ 164, 8, 4, 2 }, /* MTU2_TGI1A */
{ 240, 13, 12, 3 }, /* SCIF0_BRI */
@@ -78,7 +78,7 @@ static struct ipr_data sh7206_ipr_map[] = {
{ 255, 13, 0, 3 }, /* SCIF3_TXI */
};
-static unsigned int ipr_offsets[] = {
+static unsigned long ipr_offsets[] = {
0xfffe0818, /* IPR01 */
0xfffe081a, /* IPR02 */
0, /* unused */
@@ -95,15 +95,19 @@ static unsigned int ipr_offsets[] = {
0xfffe0c10, /* IPR14 */
};
-/* given the IPR index return the address of the IPR register */
-unsigned int map_ipridx_to_addr(int idx)
-{
- if (unlikely(idx >= ARRAY_SIZE(ipr_offsets)))
- return 0;
- return ipr_offsets[idx];
-}
+static struct ipr_desc ipr_irq_desc = {
+ .ipr_offsets = ipr_offsets,
+ .nr_offsets = ARRAY_SIZE(ipr_offsets),
+
+ .ipr_data = ipr_irq_table,
+ .nr_irqs = ARRAY_SIZE(ipr_irq_table),
+
+ .chip = {
+ .name = "IPR-sh7206",
+ },
+};
void __init init_IRQ_ipr(void)
{
- make_ipr_irq(sh7206_ipr_map, ARRAY_SIZE(sh7206_ipr_map));
+ register_ipr_controller(&ipr_irq_desc);
}
diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S
index b0b59d4a33c..d8e122971c3 100644
--- a/arch/sh/kernel/cpu/sh3/entry.S
+++ b/arch/sh/kernel/cpu/sh3/entry.S
@@ -340,8 +340,27 @@ ENTRY(vbr_base)
general_exception:
mov.l 1f, k2
mov.l 2f, k3
+#ifdef CONFIG_CPU_SUBTYPE_SHX3
+ mov.l @k2, k2
+
+ ! Is EXPEVT larger than 0x800?
+ mov #0x8, k0
+ shll8 k0
+ cmp/hs k0, k2
+ bf 0f
+
+ ! then add 0x580 (k2 is 0xd80 or 0xda0)
+ mov #0x58, k0
+ shll2 k0
+ shll2 k0
+ add k0, k2
+0:
+ bra handle_exception
+ nop
+#else
bra handle_exception
mov.l @k2, k2
+#endif
.align 2
1: .long EXPEVT
2: .long ret_from_exception
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7705.c b/arch/sh/kernel/cpu/sh3/setup-sh7705.c
index 1983fb7ad6e..a55b8ce2c54 100644
--- a/arch/sh/kernel/cpu/sh3/setup-sh7705.c
+++ b/arch/sh/kernel/cpu/sh3/setup-sh7705.c
@@ -48,7 +48,7 @@ static int __init sh7705_devices_setup(void)
}
__initcall(sh7705_devices_setup);
-static struct ipr_data sh7705_ipr_map[] = {
+static struct ipr_data ipr_irq_table[] = {
/* IRQ, IPR-idx, shift, priority */
{ 16, 0, 12, 2 }, /* TMU0 TUNI*/
{ 17, 0, 8, 2 }, /* TMU1 TUNI */
@@ -70,25 +70,29 @@ static struct ipr_data sh7705_ipr_map[] = {
};
static unsigned long ipr_offsets[] = {
- 0xFFFFFEE2 /* 0: IPRA */
-, 0xFFFFFEE4 /* 1: IPRB */
-, 0xA4000016 /* 2: IPRC */
-, 0xA4000018 /* 3: IPRD */
-, 0xA400001A /* 4: IPRE */
-, 0xA4080000 /* 5: IPRF */
-, 0xA4080002 /* 6: IPRG */
-, 0xA4080004 /* 7: IPRH */
+ 0xFFFFFEE2, /* 0: IPRA */
+ 0xFFFFFEE4, /* 1: IPRB */
+ 0xA4000016, /* 2: IPRC */
+ 0xA4000018, /* 3: IPRD */
+ 0xA400001A, /* 4: IPRE */
+ 0xA4080000, /* 5: IPRF */
+ 0xA4080002, /* 6: IPRG */
+ 0xA4080004, /* 7: IPRH */
};
-/* given the IPR index return the address of the IPR register */
-unsigned int map_ipridx_to_addr(int idx)
-{
- if (idx >= ARRAY_SIZE(ipr_offsets))
- return 0;
- return ipr_offsets[idx];
-}
+static struct ipr_desc ipr_irq_desc = {
+ .ipr_offsets = ipr_offsets,
+ .nr_offsets = ARRAY_SIZE(ipr_offsets),
+
+ .ipr_data = ipr_irq_table,
+ .nr_irqs = ARRAY_SIZE(ipr_irq_table),
+
+ .chip = {
+ .name = "IPR-sh7705",
+ },
+};
-void __init init_IRQ_ipr()
+void __init init_IRQ_ipr(void)
{
- make_ipr_irq(sh7705_ipr_map, ARRAY_SIZE(sh7705_ipr_map));
+ register_ipr_controller(&ipr_irq_desc);
}
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7709.c b/arch/sh/kernel/cpu/sh3/setup-sh7709.c
index c7d7c35fc83..d79ec0c0522 100644
--- a/arch/sh/kernel/cpu/sh3/setup-sh7709.c
+++ b/arch/sh/kernel/cpu/sh3/setup-sh7709.c
@@ -12,6 +12,26 @@
#include <linux/serial.h>
#include <asm/sci.h>
+static struct resource rtc_resources[] = {
+ [0] = {
+ .start = 0xfffffec0,
+ .end = 0xfffffec0 + 0x1e,
+ .flags = IORESOURCE_IO,
+ },
+ [1] = {
+ .start = 20,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = 21,
+ .flags = IORESOURCE_IRQ,
+ },
+ [3] = {
+ .start = 22,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
static struct plat_sci_port sci_platform_data[] = {
{
.mapbase = 0xfffffe80,
@@ -41,8 +61,16 @@ static struct platform_device sci_device = {
},
};
+static struct platform_device rtc_device = {
+ .name = "sh-rtc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(rtc_resources),
+ .resource = rtc_resources,
+};
+
static struct platform_device *sh7709_devices[] __initdata = {
&sci_device,
+ &rtc_device,
};
static int __init sh7709_devices_setup(void)
@@ -52,32 +80,66 @@ static int __init sh7709_devices_setup(void)
}
__initcall(sh7709_devices_setup);
-#define IPRx(A,N) .addr=A, .shift=N
-#define IPRA(N) IPRx(0xfffffee2UL,N)
-#define IPRB(N) IPRx(0xfffffee4UL,N)
-#define IPRC(N) IPRx(0xa4000016UL,N)
-#define IPRD(N) IPRx(0xa4000018UL,N)
-#define IPRE(N) IPRx(0xa400001aUL,N)
-
-static struct ipr_data sh7709_ipr_map[] = {
- [16] = { IPRA(12), 2 }, /* TMU TUNI0 */
- [17] = { IPRA(8), 4 }, /* TMU TUNI1 */
- [18 ... 19] = { IPRA(4), 1 }, /* TMU TUNI1 */
- [20 ... 22] = { IPRA(0), 2 }, /* RTC CUI */
- [23 ... 26] = { IPRB(4), 3 }, /* SCI */
- [27] = { IPRB(12), 2 }, /* WDT ITI */
- [32] = { IPRC(0), 1 }, /* IRQ 0 */
- [33] = { IPRC(4), 1 }, /* IRQ 1 */
- [34] = { IPRC(8), 1 }, /* IRQ 2 APM */
- [35] = { IPRC(12), 1 }, /* IRQ 3 TOUCHSCREEN */
- [36] = { IPRD(0), 1 }, /* IRQ 4 */
- [37] = { IPRD(4), 1 }, /* IRQ 5 */
- [48 ... 51] = { IPRE(12), 7 }, /* DMA */
- [52 ... 55] = { IPRE(8), 3 }, /* IRDA */
- [56 ... 59] = { IPRE(4), 3 }, /* SCIF */
+static struct ipr_data ipr_irq_table[] = {
+ { 16, 0, 12, 2 }, /* TMU TUNI0 */
+ { 17, 0, 8, 4 }, /* TMU TUNI1 */
+ { 18, 0, 4, 1 }, /* TMU TUNI1 */
+ { 19, 0, 4, 1 }, /* TMU TUNI1 */
+ { 20, 0, 0, 2 }, /* RTC CUI */
+ { 21, 0, 0, 2 }, /* RTC CUI */
+ { 22, 0, 0, 2 }, /* RTC CUI */
+
+ { 23, 1, 4, 3 }, /* SCI */
+ { 24, 1, 4, 3 }, /* SCI */
+ { 25, 1, 4, 3 }, /* SCI */
+ { 26, 1, 4, 3 }, /* SCI */
+ { 27, 1, 12, 3 }, /* WDT ITI */
+
+ { 32, 2, 0, 1 }, /* IRQ 0 */
+ { 33, 2, 4, 1 }, /* IRQ 1 */
+ { 34, 2, 8, 1 }, /* IRQ 2 APM */
+ { 35, 2, 12, 1 }, /* IRQ 3 TOUCHSCREEN */
+
+ { 36, 3, 0, 1 }, /* IRQ 4 */
+ { 37, 3, 4, 1 }, /* IRQ 5 */
+
+ { 48, 4, 12, 7 }, /* DMA */
+ { 49, 4, 12, 7 }, /* DMA */
+ { 50, 4, 12, 7 }, /* DMA */
+ { 51, 4, 12, 7 }, /* DMA */
+
+ { 52, 4, 8, 3 }, /* IRDA */
+ { 53, 4, 8, 3 }, /* IRDA */
+ { 54, 4, 8, 3 }, /* IRDA */
+ { 55, 4, 8, 3 }, /* IRDA */
+
+ { 56, 4, 4, 3 }, /* SCIF */
+ { 57, 4, 4, 3 }, /* SCIF */
+ { 58, 4, 4, 3 }, /* SCIF */
+ { 59, 4, 4, 3 }, /* SCIF */
+};
+
+static unsigned long ipr_offsets[] = {
+ 0xfffffee2, /* 0: IPRA */
+ 0xfffffee4, /* 1: IPRB */
+ 0xa4000016, /* 2: IPRC */
+ 0xa4000018, /* 3: IPRD */
+ 0xa400001a, /* 4: IPRE */
+};
+
+static struct ipr_desc ipr_irq_desc = {
+ .ipr_offsets = ipr_offsets,
+ .nr_offsets = ARRAY_SIZE(ipr_offsets),
+
+ .ipr_data = ipr_irq_table,
+ .nr_irqs = ARRAY_SIZE(ipr_irq_table),
+
+ .chip = {
+ .name = "IPR-sh7709",
+ },
};
-void __init init_IRQ_ipr()
+void __init init_IRQ_ipr(void)
{
- make_ipr_irq(sh7709_ipr_map, ARRAY_SIZE(sh7709_ipr_map));
+ register_ipr_controller(&ipr_irq_desc);
}
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7710.c b/arch/sh/kernel/cpu/sh3/setup-sh7710.c
index 51760a7e7f1..f40e6dac337 100644
--- a/arch/sh/kernel/cpu/sh3/setup-sh7710.c
+++ b/arch/sh/kernel/cpu/sh3/setup-sh7710.c
@@ -49,7 +49,7 @@ static int __init sh7710_devices_setup(void)
}
__initcall(sh7710_devices_setup);
-static struct ipr_data sh7710_ipr_map[] = {
+static struct ipr_data ipr_irq_table[] = {
/* IRQ, IPR-idx, shift, priority */
{ 16, 0, 12, 2 }, /* TMU0 TUNI*/
{ 17, 0, 8, 2 }, /* TMU1 TUNI */
@@ -78,26 +78,30 @@ static struct ipr_data sh7710_ipr_map[] = {
};
static unsigned long ipr_offsets[] = {
- 0xA414FEE2 /* 0: IPRA */
-, 0xA414FEE4 /* 1: IPRB */
-, 0xA4140016 /* 2: IPRC */
-, 0xA4140018 /* 3: IPRD */
-, 0xA414001A /* 4: IPRE */
-, 0xA4080000 /* 5: IPRF */
-, 0xA4080002 /* 6: IPRG */
-, 0xA4080004 /* 7: IPRH */
-, 0xA4080006 /* 8: IPRI */
+ 0xA414FEE2, /* 0: IPRA */
+ 0xA414FEE4, /* 1: IPRB */
+ 0xA4140016, /* 2: IPRC */
+ 0xA4140018, /* 3: IPRD */
+ 0xA414001A, /* 4: IPRE */
+ 0xA4080000, /* 5: IPRF */
+ 0xA4080002, /* 6: IPRG */
+ 0xA4080004, /* 7: IPRH */
+ 0xA4080006, /* 8: IPRI */
};
-/* given the IPR index return the address of the IPR register */
-unsigned int map_ipridx_to_addr(int idx)
-{
- if (idx >= ARRAY_SIZE(ipr_offsets))
- return 0;
- return ipr_offsets[idx];
-}
+static struct ipr_desc ipr_irq_desc = {
+ .ipr_offsets = ipr_offsets,
+ .nr_offsets = ARRAY_SIZE(ipr_offsets),
+
+ .ipr_data = ipr_irq_table,
+ .nr_irqs = ARRAY_SIZE(ipr_irq_table),
+
+ .chip = {
+ .name = "IPR-sh7710",
+ },
+};
-void __init init_IRQ_ipr()
+void __init init_IRQ_ipr(void)
{
- make_ipr_irq(sh7710_ipr_map, ARRAY_SIZE(sh7710_ipr_map));
+ register_ipr_controller(&ipr_irq_desc);
}
diff --git a/arch/sh/kernel/cpu/sh4/Makefile b/arch/sh/kernel/cpu/sh4/Makefile
index 8add10bd826..dadd6bffc12 100644
--- a/arch/sh/kernel/cpu/sh4/Makefile
+++ b/arch/sh/kernel/cpu/sh4/Makefile
@@ -10,7 +10,11 @@ obj-$(CONFIG_SH_STORE_QUEUES) += sq.o
# CPU subtype setup
obj-$(CONFIG_CPU_SUBTYPE_SH7750) += setup-sh7750.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7750R) += setup-sh7750.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7750S) += setup-sh7750.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7091) += setup-sh7750.o
obj-$(CONFIG_CPU_SUBTYPE_SH7751) += setup-sh7750.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7751R) += setup-sh7750.o
obj-$(CONFIG_CPU_SUBTYPE_SH7760) += setup-sh7760.o
obj-$(CONFIG_CPU_SUBTYPE_SH4_202) += setup-sh4-202.o
diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c
index fab2eb07196..66c3f75647b 100644
--- a/arch/sh/kernel/cpu/sh4/probe.c
+++ b/arch/sh/kernel/cpu/sh4/probe.c
@@ -141,6 +141,14 @@ int __init detect_cpu_and_cache_system(void)
current_cpu_data.flags |= CPU_HAS_LLSC;
}
break;
+ case 0x4000: /* 1st cut */
+ case 0x4001: /* 2nd cut */
+ current_cpu_data.type = CPU_SHX3;
+ current_cpu_data.icache.ways = 4;
+ current_cpu_data.dcache.ways = 4;
+ current_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_PERF_COUNTER |
+ CPU_HAS_LLSC;
+ break;
case 0x8000:
current_cpu_data.type = CPU_ST40RA;
current_cpu_data.flags |= CPU_HAS_FPU;
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7750.c b/arch/sh/kernel/cpu/sh4/setup-sh7750.c
index 03b14cf78dd..da153bcdfeb 100644
--- a/arch/sh/kernel/cpu/sh4/setup-sh7750.c
+++ b/arch/sh/kernel/cpu/sh4/setup-sh7750.c
@@ -82,7 +82,7 @@ static int __init sh7750_devices_setup(void)
}
__initcall(sh7750_devices_setup);
-static struct ipr_data sh7750_ipr_map[] = {
+static struct ipr_data ipr_irq_table[] = {
/* IRQ, IPR-idx, shift, priority */
{ 16, 0, 12, 2 }, /* TMU0 TUNI*/
{ 17, 0, 12, 2 }, /* TMU1 TUNI */
@@ -106,8 +106,27 @@ static struct ipr_data sh7750_ipr_map[] = {
{ 38, 2, 8, 7 }, /* DMAC DMAE */
};
+static unsigned long ipr_offsets[] = {
+ 0xffd00004UL, /* 0: IPRA */
+ 0xffd00008UL, /* 1: IPRB */
+ 0xffd0000cUL, /* 2: IPRC */
+ 0xffd00010UL, /* 3: IPRD */
+};
+
+static struct ipr_desc ipr_irq_desc = {
+ .ipr_offsets = ipr_offsets,
+ .nr_offsets = ARRAY_SIZE(ipr_offsets),
+
+ .ipr_data = ipr_irq_table,
+ .nr_irqs = ARRAY_SIZE(ipr_irq_table),
+
+ .chip = {
+ .name = "IPR-sh7750",
+ },
+};
+
#ifdef CONFIG_CPU_SUBTYPE_SH7751
-static struct ipr_data sh7751_ipr_map[] = {
+static struct ipr_data ipr_irq_table_sh7751[] = {
{ 44, 2, 8, 7 }, /* DMAC DMTE4 */
{ 45, 2, 8, 7 }, /* DMAC DMTE5 */
{ 46, 2, 8, 7 }, /* DMAC DMTE6 */
@@ -118,21 +137,26 @@ static struct ipr_data sh7751_ipr_map[] = {
/*{ 72, INTPRI00, 8, ? },*/ /* TMU3 TUNI */
/*{ 76, INTPRI00, 12, ? },*/ /* TMU4 TUNI */
};
-#endif
-static unsigned long ipr_offsets[] = {
- 0xffd00004UL, /* 0: IPRA */
- 0xffd00008UL, /* 1: IPRB */
- 0xffd0000cUL, /* 2: IPRC */
- 0xffd00010UL, /* 3: IPRD */
+static struct ipr_desc ipr_irq_desc_sh7751 = {
+ .ipr_offsets = ipr_offsets,
+ .nr_offsets = ARRAY_SIZE(ipr_offsets),
+
+ .ipr_data = ipr_irq_table_sh7751,
+ .nr_irqs = ARRAY_SIZE(ipr_irq_table_sh7751),
+
+ .chip = {
+ .name = "IPR-sh7751",
+ },
};
+#endif
-/* given the IPR index return the address of the IPR register */
-unsigned int map_ipridx_to_addr(int idx)
+void __init init_IRQ_ipr(void)
{
- if (idx >= ARRAY_SIZE(ipr_offsets))
- return 0;
- return ipr_offsets[idx];
+ register_ipr_controller(&ipr_irq_desc);
+#ifdef CONFIG_CPU_SUBTYPE_SH7751
+ register_ipr_controller(&ipr_irq_desc_sh7751);
+#endif
}
#define INTC_ICR 0xffd00000UL
@@ -143,11 +167,3 @@ void ipr_irq_enable_irlm(void)
{
ctrl_outw(ctrl_inw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR);
}
-
-void __init init_IRQ_ipr()
-{
- make_ipr_irq(sh7750_ipr_map, ARRAY_SIZE(sh7750_ipr_map));
-#ifdef CONFIG_CPU_SUBTYPE_SH7751
- make_ipr_irq(sh7751_ipr_map, ARRAY_SIZE(sh7751_ipr_map));
-#endif
-}
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7760.c b/arch/sh/kernel/cpu/sh4/setup-sh7760.c
index b7c702821e6..3df16975567 100644
--- a/arch/sh/kernel/cpu/sh4/setup-sh7760.c
+++ b/arch/sh/kernel/cpu/sh4/setup-sh7760.c
@@ -96,7 +96,25 @@ static struct intc2_data intc2_irq_table[] = {
{109,12, 0, 4, 0, 3}, /* CMTI */
};
-static struct ipr_data sh7760_ipr_map[] = {
+static struct intc2_desc intc2_irq_desc __read_mostly = {
+ .prio_base = 0xfe080000,
+ .msk_base = 0xfe080040,
+ .mskclr_base = 0xfe080060,
+
+ .intc2_data = intc2_irq_table,
+ .nr_irqs = ARRAY_SIZE(intc2_irq_table),
+
+ .chip = {
+ .name = "INTC2-sh7760",
+ },
+};
+
+void __init init_IRQ_intc2(void)
+{
+ register_intc2_controller(&intc2_irq_desc);
+}
+
+static struct ipr_data ipr_irq_table[] = {
/* IRQ, IPR-idx, shift, priority */
{ 16, 0, 12, 2 }, /* TMU0 TUNI*/
{ 17, 0, 8, 2 }, /* TMU1 TUNI */
@@ -133,20 +151,19 @@ static unsigned long ipr_offsets[] = {
0xffd00010UL, /* 3: IPRD */
};
-/* given the IPR index return the address of the IPR register */
-unsigned int map_ipridx_to_addr(int idx)
-{
- if (idx >= ARRAY_SIZE(ipr_offsets))
- return 0;
- return ipr_offsets[idx];
-}
+static struct ipr_desc ipr_irq_desc = {
+ .ipr_offsets = ipr_offsets,
+ .nr_offsets = ARRAY_SIZE(ipr_offsets),
-void __init init_IRQ_intc2(void)
-{
- make_intc2_irq(intc2_irq_table, ARRAY_SIZE(intc2_irq_table));
-}
+ .ipr_data = ipr_irq_table,
+ .nr_irqs = ARRAY_SIZE(ipr_irq_table),
+
+ .chip = {
+ .name = "IPR-sh7760",
+ },
+};
-void __init init_IRQ_ipr(void)
+void __init init_IRQ_ipr(void)
{
- make_ipr_irq(sh7760_ipr_map, ARRAY_SIZE(sh7760_ipr_map));
+ register_ipr_controller(&ipr_irq_desc);
}
diff --git a/arch/sh/kernel/cpu/sh4a/Makefile b/arch/sh/kernel/cpu/sh4a/Makefile
index ab7422f8f82..40062328648 100644
--- a/arch/sh/kernel/cpu/sh4a/Makefile
+++ b/arch/sh/kernel/cpu/sh4a/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7785) += setup-sh7785.o
obj-$(CONFIG_CPU_SUBTYPE_SH73180) += setup-sh73180.o
obj-$(CONFIG_CPU_SUBTYPE_SH7343) += setup-sh7343.o
obj-$(CONFIG_CPU_SUBTYPE_SH7722) += setup-sh7722.o
+obj-$(CONFIG_CPU_SUBTYPE_SHX3) += setup-shx3.o
# Primary on-chip clocks (common)
clock-$(CONFIG_CPU_SUBTYPE_SH73180) := clock-sh73180.o
@@ -17,5 +18,6 @@ clock-$(CONFIG_CPU_SUBTYPE_SH7780) := clock-sh7780.o
clock-$(CONFIG_CPU_SUBTYPE_SH7785) := clock-sh7785.o
clock-$(CONFIG_CPU_SUBTYPE_SH7343) := clock-sh7343.o
clock-$(CONFIG_CPU_SUBTYPE_SH7722) := clock-sh7722.o
+clock-$(CONFIG_CPU_SUBTYPE_SHX3) := clock-shx3.o
obj-y += $(clock-y)
diff --git a/arch/sh/kernel/cpu/sh4a/clock-shx3.c b/arch/sh/kernel/cpu/sh4a/clock-shx3.c
new file mode 100644
index 00000000000..c630b29e06a
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4a/clock-shx3.c
@@ -0,0 +1,135 @@
+/*
+ * arch/sh/kernel/cpu/sh4/clock-shx3.c
+ *
+ * SH-X3 support for the clock framework
+ *
+ * Copyright (C) 2006-2007 Renesas Technology Corp.
+ * Copyright (C) 2006-2007 Renesas Solutions Corp.
+ * Copyright (C) 2006-2007 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <asm/clock.h>
+#include <asm/freq.h>
+#include <asm/io.h>
+
+static int ifc_divisors[] = { 1, 2, 4 ,6 };
+static int bfc_divisors[] = { 1, 1, 1, 1, 1, 12, 16, 18, 24, 32, 36, 48 };
+static int pfc_divisors[] = { 1, 1, 1, 1, 1, 1, 1, 18, 24, 32, 36, 48 };
+static int cfc_divisors[] = { 1, 1, 4, 6 };
+
+#define IFC_POS 28
+#define IFC_MSK 0x0003
+#define BFC_MSK 0x000f
+#define PFC_MSK 0x000f
+#define CFC_MSK 0x0003
+#define BFC_POS 16
+#define PFC_POS 0
+#define CFC_POS 20
+
+static void master_clk_init(struct clk *clk)
+{
+ clk->rate *= pfc_divisors[(ctrl_inl(FRQCR) >> PFC_POS) & PFC_MSK];
+}
+
+static struct clk_ops shx3_master_clk_ops = {
+ .init = master_clk_init,
+};
+
+static void module_clk_recalc(struct clk *clk)
+{
+ int idx = ((ctrl_inl(FRQCR) >> PFC_POS) & PFC_MSK);
+ clk->rate = clk->parent->rate / pfc_divisors[idx];
+}
+
+static struct clk_ops shx3_module_clk_ops = {
+ .recalc = module_clk_recalc,
+};
+
+static void bus_clk_recalc(struct clk *clk)
+{
+ int idx = ((ctrl_inl(FRQCR) >> BFC_POS) & BFC_MSK);
+ clk->rate = clk->parent->rate / bfc_divisors[idx];
+}
+
+static struct clk_ops shx3_bus_clk_ops = {
+ .recalc = bus_clk_recalc,
+};
+
+static void cpu_clk_recalc(struct clk *clk)
+{
+ int idx = ((ctrl_inl(FRQCR) >> IFC_POS) & IFC_MSK);
+ clk->rate = clk->parent->rate / ifc_divisors[idx];
+}
+
+static struct clk_ops shx3_cpu_clk_ops = {
+ .recalc = cpu_clk_recalc,
+};
+
+static struct clk_ops *shx3_clk_ops[] = {
+ &shx3_master_clk_ops,
+ &shx3_module_clk_ops,
+ &shx3_bus_clk_ops,
+ &shx3_cpu_clk_ops,
+};
+
+void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
+{
+ if (idx < ARRAY_SIZE(shx3_clk_ops))
+ *ops = shx3_clk_ops[idx];
+}
+
+static void shyway_clk_recalc(struct clk *clk)
+{
+ int idx = ((ctrl_inl(FRQCR) >> CFC_POS) & CFC_MSK);
+ clk->rate = clk->parent->rate / cfc_divisors[idx];
+}
+
+static struct clk_ops shx3_shyway_clk_ops = {
+ .recalc = shyway_clk_recalc,
+};
+
+static struct clk shx3_shyway_clk = {
+ .name = "shyway_clk",
+ .flags = CLK_ALWAYS_ENABLED,
+ .ops = &shx3_shyway_clk_ops,
+};
+
+/*
+ * Additional SHx3-specific on-chip clocks that aren't already part of the
+ * clock framework
+ */
+static struct clk *shx3_onchip_clocks[] = {
+ &shx3_shyway_clk,
+};
+
+static int __init shx3_clk_init(void)
+{
+ struct clk *clk = clk_get(NULL, "master_clk");
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(shx3_onchip_clocks); i++) {
+ struct clk *clkp = shx3_onchip_clocks[i];
+
+ clkp->parent = clk;
+ clk_register(clkp);
+ clk_enable(clkp);
+ }
+
+ /*
+ * Now that we have the rest of the clocks registered, we need to
+ * force the parent clock to propagate so that these clocks will
+ * automatically figure out their rate. We cheat by handing the
+ * parent clock its current rate and forcing child propagation.
+ */
+ clk_set_rate(clk, clk_get_rate(clk));
+
+ clk_put(clk);
+
+ return 0;
+}
+arch_initcall(shx3_clk_init);
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
index 1143fbf65fa..a3e159ef6df 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
@@ -1,7 +1,7 @@
/*
* SH7722 Setup
*
- * Copyright (C) 2006 Paul Mundt
+ * Copyright (C) 2006 - 2007 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
@@ -10,6 +10,8 @@
#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/serial.h>
+#include <linux/mm.h>
+#include <asm/mmzone.h>
#include <asm/sci.h>
static struct plat_sci_port sci_platform_data[] = {
@@ -42,7 +44,7 @@ static int __init sh7722_devices_setup(void)
}
__initcall(sh7722_devices_setup);
-static struct ipr_data sh7722_ipr_map[] = {
+static struct ipr_data ipr_irq_table[] = {
/* IRQ, IPR-idx, shift, prio */
{ 16, 0, 12, 2 }, /* TMU0 */
{ 17, 0, 8, 2 }, /* TMU1 */
@@ -67,14 +69,25 @@ static unsigned long ipr_offsets[] = {
0xa408002c, /* 11: IPRL */
};
-unsigned int map_ipridx_to_addr(int idx)
+static struct ipr_desc ipr_irq_desc = {
+ .ipr_offsets = ipr_offsets,
+ .nr_offsets = ARRAY_SIZE(ipr_offsets),
+
+ .ipr_data = ipr_irq_table,
+ .nr_irqs = ARRAY_SIZE(ipr_irq_table),
+
+ .chip = {
+ .name = "IPR-sh7722",
+ },
+};
+
+void __init init_IRQ_ipr(void)
{
- if (unlikely(idx >= ARRAY_SIZE(ipr_offsets)))
- return 0;
- return ipr_offsets[idx];
+ register_ipr_controller(&ipr_irq_desc);
}
-void __init init_IRQ_ipr(void)
+void __init plat_mem_setup(void)
{
- make_ipr_irq(sh7722_ipr_map, ARRAY_SIZE(sh7722_ipr_map));
+ /* Register the URAM space as Node 1 */
+ setup_bootmem_node(1, 0x055f0000, 0x05610000);
}
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
index 9aeaa2ddaa2..b57c760bffd 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
@@ -102,7 +102,20 @@ static struct intc2_data intc2_irq_table[] = {
{ 68, 0x14, 8, 0, 18, 2 }, /* PCIC4 */
};
+static struct intc2_desc intc2_irq_desc __read_mostly = {
+ .prio_base = 0xffd40000,
+ .msk_base = 0xffd40038,
+ .mskclr_base = 0xffd4003c,
+
+ .intc2_data = intc2_irq_table,
+ .nr_irqs = ARRAY_SIZE(intc2_irq_table),
+
+ .chip = {
+ .name = "INTC2-sh7780",
+ },
+};
+
void __init init_IRQ_intc2(void)
{
- make_intc2_irq(intc2_irq_table, ARRAY_SIZE(intc2_irq_table));
+ register_intc2_controller(&intc2_irq_desc);
}
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
index 07b0de82cfe..ce10ec5d691 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
@@ -97,7 +97,21 @@ static struct intc2_data intc2_irq_table[] = {
{ 60, 12, 16, 0, 7, 3 }, /* SCIF5 ERI, RXI, BRI, TXI */
};
+static struct intc2_desc intc2_irq_desc __read_mostly = {
+ .prio_base = 0xffd40000,
+ .msk_base = 0xffd40038,
+ .mskclr_base = 0xffd4003c,
+
+ .intc2_data = intc2_irq_table,
+ .nr_irqs = ARRAY_SIZE(intc2_irq_table),
+
+ .chip = {
+ .name = "INTC2-sh7785",
+ },
+};
+
void __init init_IRQ_intc2(void)
{
- make_intc2_irq(intc2_irq_table, ARRAY_SIZE(intc2_irq_table));
+ register_intc2_controller(&intc2_irq_desc);
}
+
diff --git a/arch/sh/kernel/cpu/sh4a/setup-shx3.c b/arch/sh/kernel/cpu/sh4a/setup-shx3.c
new file mode 100644
index 00000000000..70683ea12b8
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4a/setup-shx3.c
@@ -0,0 +1,85 @@
+/*
+ * SH-X3 Setup
+ *
+ * Copyright (C) 2007 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/io.h>
+#include <asm/sci.h>
+
+static struct plat_sci_port sci_platform_data[] = {
+ {
+ .mapbase = 0xffc30000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 40, 41, 43, 42 },
+ }, {
+ .mapbase = 0xffc40000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 44, 45, 47, 46 },
+ }, {
+ .mapbase = 0xffc50000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 48, 49, 51, 50 },
+ }, {
+ .mapbase = 0xffc60000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 52, 53, 55, 54 },
+ }, {
+ .flags = 0,
+ }
+};
+
+static struct platform_device sci_device = {
+ .name = "sh-sci",
+ .id = -1,
+ .dev = {
+ .platform_data = sci_platform_data,
+ },
+};
+
+static struct platform_device *shx3_devices[] __initdata = {
+ &sci_device,
+};
+
+static int __init shx3_devices_setup(void)
+{
+ return platform_add_devices(shx3_devices,
+ ARRAY_SIZE(shx3_devices));
+}
+__initcall(shx3_devices_setup);
+
+static struct intc2_data intc2_irq_table[] = {
+ { 16, 0, 0, 0, 1, 2 }, /* TMU0 */
+ { 40, 4, 0, 0x20, 0, 3 }, /* SCIF0 ERI */
+ { 41, 4, 0, 0x20, 1, 3 }, /* SCIF0 RXI */
+ { 42, 4, 0, 0x20, 2, 3 }, /* SCIF0 BRI */
+ { 43, 4, 0, 0x20, 3, 3 }, /* SCIF0 TXI */
+};
+
+static struct intc2_desc intc2_irq_desc __read_mostly = {
+ .prio_base = 0xfe410000,
+ .msk_base = 0xfe410820,
+ .mskclr_base = 0xfe410850,
+
+ .intc2_data = intc2_irq_table,
+ .nr_irqs = ARRAY_SIZE(intc2_irq_table),
+
+ .chip = {
+ .name = "INTC2-SHX3",
+ },
+};
+
+void __init init_IRQ_intc2(void)
+{
+ register_intc2_controller(&intc2_irq_desc);
+}
diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c
index 27b923c45b3..27897798867 100644
--- a/arch/sh/kernel/irq.c
+++ b/arch/sh/kernel/irq.c
@@ -158,15 +158,11 @@ asmlinkage int do_IRQ(unsigned int irq, struct pt_regs *regs)
}
#ifdef CONFIG_4KSTACKS
-/*
- * These should really be __section__(".bss.page_aligned") as well, but
- * gcc's 3.0 and earlier don't handle that correctly.
- */
static char softirq_stack[NR_CPUS * THREAD_SIZE]
- __attribute__((__aligned__(THREAD_SIZE)));
+ __attribute__((__section__(".bss.page_aligned")));
static char hardirq_stack[NR_CPUS * THREAD_SIZE]
- __attribute__((__aligned__(THREAD_SIZE)));
+ __attribute__((__section__(".bss.page_aligned")));
/*
* allocate per-cpu stacks for hardirq and for softirq processing
diff --git a/arch/sh/kernel/machvec.c b/arch/sh/kernel/machvec.c
new file mode 100644
index 00000000000..23c5948f012
--- /dev/null
+++ b/arch/sh/kernel/machvec.c
@@ -0,0 +1,130 @@
+/*
+ * arch/sh/kernel/machvec.c
+ *
+ * The SuperH machine vector setup handlers, yanked from setup.c
+ *
+ * Copyright (C) 1999 Niibe Yutaka
+ * Copyright (C) 2002 - 2007 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/string.h>
+#include <asm/machvec.h>
+#include <asm/sections.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#define MV_NAME_SIZE 32
+
+#define for_each_mv(mv) \
+ for ((mv) = (struct sh_machine_vector *)&__machvec_start; \
+ (mv) && (unsigned long)(mv) < (unsigned long)&__machvec_end; \
+ (mv)++)
+
+static struct sh_machine_vector * __init get_mv_byname(const char *name)
+{
+ struct sh_machine_vector *mv;
+
+ for_each_mv(mv)
+ if (strcasecmp(name, mv->mv_name) == 0)
+ return mv;
+
+ return NULL;
+}
+
+static unsigned int __initdata machvec_selected;
+
+static int __init early_parse_mv(char *from)
+{
+ char mv_name[MV_NAME_SIZE] = "";
+ char *mv_end;
+ char *mv_comma;
+ int mv_len;
+ struct sh_machine_vector *mvp;
+
+ mv_end = strchr(from, ' ');
+ if (mv_end == NULL)
+ mv_end = from + strlen(from);
+
+ mv_comma = strchr(from, ',');
+ mv_len = mv_end - from;
+ if (mv_len > (MV_NAME_SIZE-1))
+ mv_len = MV_NAME_SIZE-1;
+ memcpy(mv_name, from, mv_len);
+ mv_name[mv_len] = '\0';
+ from = mv_end;
+
+ machvec_selected = 1;
+
+ /* Boot with the generic vector */
+ if (strcmp(mv_name, "generic") == 0)
+ return 0;
+
+ mvp = get_mv_byname(mv_name);
+ if (unlikely(!mvp)) {
+ printk("Available vectors:\n\n\t'%s', ", sh_mv.mv_name);
+ for_each_mv(mvp)
+ printk("'%s', ", mvp->mv_name);
+ printk("\n\n");
+ panic("Failed to select machvec '%s' -- halting.\n",
+ mv_name);
+ } else
+ sh_mv = *mvp;
+
+ return 0;
+}
+early_param("sh_mv", early_parse_mv);
+
+void __init sh_mv_setup(void)
+{
+ /*
+ * Only overload the machvec if one hasn't been selected on
+ * the command line with sh_mv=
+ */
+ if (!machvec_selected) {
+ unsigned long machvec_size;
+
+ machvec_size = ((unsigned long)&__machvec_end -
+ (unsigned long)&__machvec_start);
+
+ /*
+ * If the machvec hasn't been preselected, use the first
+ * vector (usually the only one) from .machvec.init.
+ */
+ if (machvec_size >= sizeof(struct sh_machine_vector))
+ sh_mv = *(struct sh_machine_vector *)&__machvec_start;
+ }
+
+ printk(KERN_NOTICE "Booting machvec: %s\n", get_system_type());
+
+ /*
+ * Manually walk the vec, fill in anything that the board hasn't yet
+ * by hand, wrapping to the generic implementation.
+ */
+#define mv_set(elem) do { \
+ if (!sh_mv.mv_##elem) \
+ sh_mv.mv_##elem = generic_##elem; \
+} while (0)
+
+ mv_set(inb); mv_set(inw); mv_set(inl);
+ mv_set(outb); mv_set(outw); mv_set(outl);
+
+ mv_set(inb_p); mv_set(inw_p); mv_set(inl_p);
+ mv_set(outb_p); mv_set(outw_p); mv_set(outl_p);
+
+ mv_set(insb); mv_set(insw); mv_set(insl);
+ mv_set(outsb); mv_set(outsw); mv_set(outsl);
+
+ mv_set(readb); mv_set(readw); mv_set(readl);
+ mv_set(writeb); mv_set(writew); mv_set(writel);
+
+ mv_set(ioport_map);
+ mv_set(ioport_unmap);
+ mv_set(irq_demux);
+
+ if (!sh_mv.mv_nr_irqs)
+ sh_mv.mv_nr_irqs = NR_IRQS;
+}
diff --git a/arch/sh/kernel/process.c b/arch/sh/kernel/process.c
index a11e2aa73cb..6334a4c54c7 100644
--- a/arch/sh/kernel/process.c
+++ b/arch/sh/kernel/process.c
@@ -17,6 +17,7 @@
#include <linux/kexec.h>
#include <linux/kdebug.h>
#include <linux/tick.h>
+#include <linux/reboot.h>
#include <asm/uaccess.h>
#include <asm/mmu_context.h>
#include <asm/pgalloc.h>
@@ -319,9 +320,7 @@ static void ubc_set_tracing(int asid, unsigned long pc)
ctrl_outl(pc, UBC_BARA);
#ifdef CONFIG_MMU
- /* We don't have any ASID settings for the SH-2! */
- if (current_cpu_data.type != CPU_SH7604)
- ctrl_outb(asid, UBC_BASRA);
+ ctrl_outb(asid, UBC_BASRA);
#endif
ctrl_outl(0, UBC_BAMRA);
@@ -405,8 +404,8 @@ asmlinkage int sys_fork(unsigned long r4, unsigned long r5,
unsigned long r6, unsigned long r7,
struct pt_regs __regs)
{
- struct pt_regs *regs = RELOC_HIDE(&__regs, 0);
#ifdef CONFIG_MMU
+ struct pt_regs *regs = RELOC_HIDE(&__regs, 0);
return do_fork(SIGCHLD, regs->regs[15], regs, 0, NULL, NULL);
#else
/* fork almost works, enough to trick you into looking elsewhere :-( */
@@ -449,23 +448,20 @@ asmlinkage int sys_vfork(unsigned long r4, unsigned long r5,
/*
* sys_execve() executes a new program.
*/
-asmlinkage int sys_execve(char *ufilename, char **uargv,
- char **uenvp, unsigned long r7,
+asmlinkage int sys_execve(char __user *ufilename, char __user * __user *uargv,
+ char __user * __user *uenvp, unsigned long r7,
struct pt_regs __regs)
{
struct pt_regs *regs = RELOC_HIDE(&__regs, 0);
int error;
char *filename;
- filename = getname((char __user *)ufilename);
+ filename = getname(ufilename);
error = PTR_ERR(filename);
if (IS_ERR(filename))
goto out;
- error = do_execve(filename,
- (char __user * __user *)uargv,
- (char __user * __user *)uenvp,
- regs);
+ error = do_execve(filename, uargv, uenvp, regs);
if (error == 0) {
task_lock(current);
current->ptrace &= ~PT_DTRACE;
diff --git a/arch/sh/kernel/ptrace.c b/arch/sh/kernel/ptrace.c
index 3fb5fc0b550..f2eaa485d04 100644
--- a/arch/sh/kernel/ptrace.c
+++ b/arch/sh/kernel/ptrace.c
@@ -99,7 +99,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
ret = -EIO;
if (copied != sizeof(tmp))
break;
- ret = put_user(tmp,(unsigned long *) data);
+ ret = put_user(tmp,(unsigned long __user *) data);
break;
}
@@ -128,7 +128,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
tmp = !!tsk_used_math(child);
else
tmp = 0;
- ret = put_user(tmp, (unsigned long *)data);
+ ret = put_user(tmp, (unsigned long __user *)data);
break;
}
@@ -196,7 +196,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
case PTRACE_SINGLESTEP: { /* set the trap flag. */
long pc;
- struct pt_regs *dummy = NULL;
+ struct pt_regs *regs = NULL;
ret = -EIO;
if (!valid_signal(data))
@@ -207,7 +207,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
child->ptrace |= PT_DTRACE;
}
- pc = get_stack_long(child, (long)&dummy->pc);
+ pc = get_stack_long(child, (long)&regs->pc);
/* Next scheduling will set up UBC */
if (child->thread.ubc_pc == 0)
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index c2772913593..de8e6e2f2c8 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -23,6 +23,7 @@
#include <linux/kexec.h>
#include <asm/uaccess.h>
#include <asm/io.h>
+#include <asm/page.h>
#include <asm/sections.h>
#include <asm/irq.h>
#include <asm/setup.h>
@@ -41,20 +42,19 @@ extern void * __rd_start, * __rd_end;
* The bigger value means no problem.
*/
struct sh_cpuinfo boot_cpu_data = { CPU_SH_NONE, 10000000, };
+
+/*
+ * The machine vector. First entry in .machvec.init, or clobbered by
+ * sh_mv= on the command line, prior to .machvec.init teardown.
+ */
+struct sh_machine_vector sh_mv = { .mv_name = "generic", };
+
#ifdef CONFIG_VT
struct screen_info screen_info;
#endif
-#if defined(CONFIG_SH_UNKNOWN)
-struct sh_machine_vector sh_mv;
-#endif
-
extern int root_mountflags;
-#define MV_NAME_SIZE 32
-
-static struct sh_machine_vector* __init get_mv_byname(const char* name);
-
/*
* This is set up by the setup-routine at boot-time
*/
@@ -80,131 +80,17 @@ static struct resource data_resource = { .name = "Kernel data", };
unsigned long memory_start, memory_end;
-static inline void parse_cmdline (char ** cmdline_p, char mv_name[MV_NAME_SIZE],
- struct sh_machine_vector** mvp,
- unsigned long *mv_io_base)
+static int __init early_parse_mem(char *p)
{
- char c = ' ', *to = command_line, *from = COMMAND_LINE;
- int len = 0;
-
- /* Save unparsed command line copy for /proc/cmdline */
- memcpy(boot_command_line, COMMAND_LINE, COMMAND_LINE_SIZE);
- boot_command_line[COMMAND_LINE_SIZE-1] = '\0';
+ unsigned long size;
memory_start = (unsigned long)PAGE_OFFSET+__MEMORY_START;
- memory_end = memory_start + __MEMORY_SIZE;
-
- for (;;) {
- /*
- * "mem=XXX[kKmM]" defines a size of memory.
- */
- if (c == ' ' && !memcmp(from, "mem=", 4)) {
- if (to != command_line)
- to--;
- {
- unsigned long mem_size;
-
- mem_size = memparse(from+4, &from);
- memory_end = memory_start + mem_size;
- }
- }
-
- if (c == ' ' && !memcmp(from, "sh_mv=", 6)) {
- char* mv_end;
- char* mv_comma;
- int mv_len;
- if (to != command_line)
- to--;
- from += 6;
- mv_end = strchr(from, ' ');
- if (mv_end == NULL)
- mv_end = from + strlen(from);
-
- mv_comma = strchr(from, ',');
- if ((mv_comma != NULL) && (mv_comma < mv_end)) {
- int ints[3];
- get_options(mv_comma+1, ARRAY_SIZE(ints), ints);
- *mv_io_base = ints[1];
- mv_len = mv_comma - from;
- } else {
- mv_len = mv_end - from;
- }
- if (mv_len > (MV_NAME_SIZE-1))
- mv_len = MV_NAME_SIZE-1;
- memcpy(mv_name, from, mv_len);
- mv_name[mv_len] = '\0';
- from = mv_end;
-
- *mvp = get_mv_byname(mv_name);
- }
-
- c = *(from++);
- if (!c)
- break;
- if (COMMAND_LINE_SIZE <= ++len)
- break;
- *(to++) = c;
- }
- *to = '\0';
- *cmdline_p = command_line;
-}
-
-static int __init sh_mv_setup(char **cmdline_p)
-{
-#ifdef CONFIG_SH_UNKNOWN
- extern struct sh_machine_vector mv_unknown;
-#endif
- struct sh_machine_vector *mv = NULL;
- char mv_name[MV_NAME_SIZE] = "";
- unsigned long mv_io_base = 0;
-
- parse_cmdline(cmdline_p, mv_name, &mv, &mv_io_base);
-
-#ifdef CONFIG_SH_UNKNOWN
- if (mv == NULL) {
- mv = &mv_unknown;
- if (*mv_name != '\0') {
- printk("Warning: Unsupported machine %s, using unknown\n",
- mv_name);
- }
- }
- sh_mv = *mv;
-#endif
-
- /*
- * Manually walk the vec, fill in anything that the board hasn't yet
- * by hand, wrapping to the generic implementation.
- */
-#define mv_set(elem) do { \
- if (!sh_mv.mv_##elem) \
- sh_mv.mv_##elem = generic_##elem; \
-} while (0)
-
- mv_set(inb); mv_set(inw); mv_set(inl);
- mv_set(outb); mv_set(outw); mv_set(outl);
-
- mv_set(inb_p); mv_set(inw_p); mv_set(inl_p);
- mv_set(outb_p); mv_set(outw_p); mv_set(outl_p);
-
- mv_set(insb); mv_set(insw); mv_set(insl);
- mv_set(outsb); mv_set(outsw); mv_set(outsl);
-
- mv_set(readb); mv_set(readw); mv_set(readl);
- mv_set(writeb); mv_set(writew); mv_set(writel);
-
- mv_set(ioport_map);
- mv_set(ioport_unmap);
- mv_set(irq_demux);
-
-#ifdef CONFIG_SH_UNKNOWN
- __set_io_port_base(mv_io_base);
-#endif
-
- if (!sh_mv.mv_nr_irqs)
- sh_mv.mv_nr_irqs = NR_IRQS;
+ size = memparse(p, &p);
+ memory_end = memory_start + size;
return 0;
}
+early_param("mem", early_parse_mem);
/*
* Register fully available low RAM pages with the bootmem allocator.
@@ -230,7 +116,7 @@ static void __init register_bootmem_low_pages(void)
free_bootmem(PFN_PHYS(curr_pfn), PFN_PHYS(pages));
}
-void __init setup_bootmem_allocator(unsigned long start_pfn)
+void __init setup_bootmem_allocator(unsigned long free_pfn)
{
unsigned long bootmap_size;
@@ -239,9 +125,10 @@ void __init setup_bootmem_allocator(unsigned long start_pfn)
* bootstrap step all allocations (until the page allocator
* is intact) must be done via bootmem_alloc().
*/
- bootmap_size = init_bootmem_node(NODE_DATA(0), start_pfn,
+ bootmap_size = init_bootmem_node(NODE_DATA(0), free_pfn,
min_low_pfn, max_low_pfn);
+ add_active_range(0, min_low_pfn, max_low_pfn);
register_bootmem_low_pages();
node_set_online(0);
@@ -254,7 +141,7 @@ void __init setup_bootmem_allocator(unsigned long start_pfn)
* an invalid RAM area.
*/
reserve_bootmem(__MEMORY_START+PAGE_SIZE,
- (PFN_PHYS(start_pfn)+bootmap_size+PAGE_SIZE-1)-__MEMORY_START);
+ (PFN_PHYS(free_pfn)+bootmap_size+PAGE_SIZE-1)-__MEMORY_START);
/*
* reserve physical page 0 - it's a special BIOS page on many boxes,
@@ -262,6 +149,8 @@ void __init setup_bootmem_allocator(unsigned long start_pfn)
*/
reserve_bootmem(__MEMORY_START, PAGE_SIZE);
+ sparse_memory_present_with_active_regions(0);
+
#ifdef CONFIG_BLK_DEV_INITRD
ROOT_DEV = MKDEV(RAMDISK_MAJOR, 0);
if (&__rd_start != &__rd_end) {
@@ -315,10 +204,6 @@ void __init setup_arch(char **cmdline_p)
{
enable_mmu();
-#ifdef CONFIG_CMDLINE_BOOL
- strcpy(COMMAND_LINE, CONFIG_CMDLINE);
-#endif
-
ROOT_DEV = old_decode_dev(ORIG_ROOT_DEV);
#ifdef CONFIG_BLK_DEV_RAM
@@ -339,9 +224,22 @@ void __init setup_arch(char **cmdline_p)
data_resource.start = virt_to_phys(_etext);
data_resource.end = virt_to_phys(_edata)-1;
+ memory_start = (unsigned long)PAGE_OFFSET+__MEMORY_START;
+ memory_end = memory_start + __MEMORY_SIZE;
+
+#ifdef CONFIG_CMDLINE_BOOL
+ strlcpy(command_line, CONFIG_CMDLINE, sizeof(command_line));
+#else
+ strlcpy(command_line, COMMAND_LINE, sizeof(command_line));
+#endif
+
+ /* Save unparsed command line copy for /proc/cmdline */
+ memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
+ *cmdline_p = command_line;
+
parse_early_param();
- sh_mv_setup(cmdline_p);
+ sh_mv_setup();
/*
* Find the highest page frame number we have available
@@ -355,8 +253,9 @@ void __init setup_arch(char **cmdline_p)
min_low_pfn = __MEMORY_START >> PAGE_SHIFT;
nodes_clear(node_online_map);
+
+ /* Setup bootmem with available RAM */
setup_memory();
- paging_init();
sparse_init();
#ifdef CONFIG_DUMMY_CONSOLE
@@ -366,46 +265,13 @@ void __init setup_arch(char **cmdline_p)
/* Perform the machine specific initialisation */
if (likely(sh_mv.mv_setup))
sh_mv.mv_setup(cmdline_p);
-}
-
-struct sh_machine_vector* __init get_mv_byname(const char* name)
-{
- extern long __machvec_start, __machvec_end;
- struct sh_machine_vector *all_vecs =
- (struct sh_machine_vector *)&__machvec_start;
-
- int i, n = ((unsigned long)&__machvec_end
- - (unsigned long)&__machvec_start)/
- sizeof(struct sh_machine_vector);
-
- for (i = 0; i < n; ++i) {
- struct sh_machine_vector *mv = &all_vecs[i];
- if (mv == NULL)
- continue;
- if (strcasecmp(name, get_system_type()) == 0) {
- return mv;
- }
- }
- return NULL;
-}
-
-static struct cpu cpu[NR_CPUS];
-
-static int __init topology_init(void)
-{
- int cpu_id;
- for_each_possible_cpu(cpu_id)
- register_cpu(&cpu[cpu_id], cpu_id);
-
- return 0;
+ paging_init();
}
-subsys_initcall(topology_init);
-
static const char *cpu_name[] = {
[CPU_SH7206] = "SH7206", [CPU_SH7619] = "SH7619",
- [CPU_SH7604] = "SH7604", [CPU_SH7300] = "SH7300",
+ [CPU_SH7300] = "SH7300",
[CPU_SH7705] = "SH7705", [CPU_SH7706] = "SH7706",
[CPU_SH7707] = "SH7707", [CPU_SH7708] = "SH7708",
[CPU_SH7709] = "SH7709", [CPU_SH7710] = "SH7710",
@@ -419,7 +285,7 @@ static const char *cpu_name[] = {
[CPU_SH7770] = "SH7770", [CPU_SH7780] = "SH7780",
[CPU_SH7781] = "SH7781", [CPU_SH7343] = "SH7343",
[CPU_SH7785] = "SH7785", [CPU_SH7722] = "SH7722",
- [CPU_SH_NONE] = "Unknown"
+ [CPU_SHX3] = "SH-X3", [CPU_SH_NONE] = "Unknown"
};
const char *get_cpu_subtype(struct sh_cpuinfo *c)
diff --git a/arch/sh/kernel/sh_ksyms.c b/arch/sh/kernel/sh_ksyms.c
index c1cfcb9f047..c968dcf09ee 100644
--- a/arch/sh/kernel/sh_ksyms.c
+++ b/arch/sh/kernel/sh_ksyms.c
@@ -78,6 +78,16 @@ DECLARE_EXPORT(__movstr);
DECLARE_EXPORT(__movmem_i4_even);
DECLARE_EXPORT(__movmem_i4_odd);
DECLARE_EXPORT(__movmemSI12_i4);
+
+#if (__GNUC_MINOR__ == 2 || defined(__GNUC_STM_RELEASE__))
+/*
+ * GCC 4.2 emits these for division, as do GCC 4.1.x versions of the ST
+ * compiler which include backported patches.
+ */
+DECLARE_EXPORT(__sdivsi3_i4i);
+DECLARE_EXPORT(__udiv_qrnnd_16);
+DECLARE_EXPORT(__udivsi3_i4i);
+#endif
#else /* GCC 3.x */
DECLARE_EXPORT(__movstr_i4_even);
DECLARE_EXPORT(__movstr_i4_odd);
diff --git a/arch/sh/kernel/signal.c b/arch/sh/kernel/signal.c
index e323e299878..706d81ccd10 100644
--- a/arch/sh/kernel/signal.c
+++ b/arch/sh/kernel/signal.c
@@ -23,6 +23,7 @@
#include <linux/personality.h>
#include <linux/binfmts.h>
#include <linux/freezer.h>
+#include <linux/io.h>
#include <asm/system.h>
#include <asm/ucontext.h>
#include <asm/uaccess.h>
@@ -261,7 +262,7 @@ asmlinkage int sys_rt_sigreturn(unsigned long r4, unsigned long r5,
goto badframe;
/* It is more difficult to avoid calling this function than to
call it and ignore errors. */
- do_sigaltstack(&st, NULL, regs->regs[15]);
+ do_sigaltstack((const stack_t __user *)&st, NULL, (unsigned long)frame);
return r0;
diff --git a/arch/sh/kernel/syscalls.S b/arch/sh/kernel/syscalls.S
index 7db1c2dc599..ff5656e60c0 100644
--- a/arch/sh/kernel/syscalls.S
+++ b/arch/sh/kernel/syscalls.S
@@ -308,9 +308,9 @@ ENTRY(sys_call_table)
.long sys_utimes
.long sys_fadvise64_64_wrapper
.long sys_ni_syscall /* Reserved for vserver */
- .long sys_ni_syscall /* Reserved for mbind */
- .long sys_ni_syscall /* 275 - get_mempolicy */
- .long sys_ni_syscall /* set_mempolicy */
+ .long sys_mbind
+ .long sys_get_mempolicy /* 275 */
+ .long sys_set_mempolicy
.long sys_mq_open
.long sys_mq_unlink
.long sys_mq_timedsend
diff --git a/arch/sh/kernel/timers/timer-tmu.c b/arch/sh/kernel/timers/timer-tmu.c
index 2d997e2a5b6..097ebd49f1b 100644
--- a/arch/sh/kernel/timers/timer-tmu.c
+++ b/arch/sh/kernel/timers/timer-tmu.c
@@ -30,7 +30,7 @@
static int tmu_timer_start(void)
{
- ctrl_outb(ctrl_inb(TMU_TSTR) | 0x3, TMU_TSTR);
+ ctrl_outb(ctrl_inb(TMU_012_TSTR) | 0x3, TMU_012_TSTR);
return 0;
}
@@ -52,7 +52,7 @@ static void tmu0_timer_set_interval(unsigned long interval, unsigned int reload)
static int tmu_timer_stop(void)
{
- ctrl_outb(ctrl_inb(TMU_TSTR) & ~0x3, TMU_TSTR);
+ ctrl_outb(ctrl_inb(TMU_012_TSTR) & ~0x3, TMU_012_TSTR);
return 0;
}
@@ -174,7 +174,8 @@ static int tmu_timer_init(void)
#if !defined(CONFIG_CPU_SUBTYPE_SH7300) && \
!defined(CONFIG_CPU_SUBTYPE_SH7760) && \
- !defined(CONFIG_CPU_SUBTYPE_SH7785)
+ !defined(CONFIG_CPU_SUBTYPE_SH7785) && \
+ !defined(CONFIG_CPU_SUBTYPE_SHX3)
ctrl_outb(TMU_TOCR_INIT, TMU_TOCR);
#endif
diff --git a/arch/sh/kernel/topology.c b/arch/sh/kernel/topology.c
new file mode 100644
index 00000000000..9b5844a1bda
--- /dev/null
+++ b/arch/sh/kernel/topology.c
@@ -0,0 +1,49 @@
+/*
+ * arch/sh/kernel/topology.c
+ *
+ * Copyright (C) 2007 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/cpu.h>
+#include <linux/cpumask.h>
+#include <linux/init.h>
+#include <linux/percpu.h>
+#include <linux/node.h>
+#include <linux/nodemask.h>
+
+static DEFINE_PER_CPU(struct cpu, cpu_devices);
+
+static int __init topology_init(void)
+{
+ int i, ret;
+
+#ifdef CONFIG_NEED_MULTIPLE_NODES
+ for_each_online_node(i)
+ register_one_node(i);
+#endif
+
+ for_each_present_cpu(i) {
+ ret = register_cpu(&per_cpu(cpu_devices, i), i);
+ if (unlikely(ret))
+ printk(KERN_WARNING "%s: register_cpu %d failed (%d)\n",
+ __FUNCTION__, i, ret);
+ }
+
+#if defined(CONFIG_NUMA) && !defined(CONFIG_SMP)
+ /*
+ * In the UP case, make sure the CPU association is still
+ * registered under each node. Without this, sysfs fails
+ * to make the connection between nodes other than node0
+ * and cpu0.
+ */
+ for_each_online_node(i)
+ if (i != numa_node_id())
+ register_cpu_under_node(raw_smp_processor_id(), i);
+#endif
+
+ return 0;
+}
+subsys_initcall(topology_init);
diff --git a/arch/sh/kernel/traps.c b/arch/sh/kernel/traps.c
index 09480887076..05a40f3c30b 100644
--- a/arch/sh/kernel/traps.c
+++ b/arch/sh/kernel/traps.c
@@ -584,7 +584,7 @@ uspace_segv:
info.si_signo = SIGBUS;
info.si_errno = 0;
info.si_code = si_code;
- info.si_addr = (void *) address;
+ info.si_addr = (void __user *)address;
force_sig_info(SIGBUS, &info, current);
} else {
if (regs->pc & 1)
@@ -617,7 +617,7 @@ uspace_segv:
*/
int is_dsp_inst(struct pt_regs *regs)
{
- unsigned short inst;
+ unsigned short inst = 0;
/*
* Safe guard if DSP mode is already enabled or we're lacking
@@ -645,7 +645,6 @@ asmlinkage void do_divide_error(unsigned long r4, unsigned long r5,
unsigned long r6, unsigned long r7,
struct pt_regs __regs)
{
- struct pt_regs *regs = RELOC_HIDE(&__regs, 0);
siginfo_t info;
switch (r4) {
diff --git a/arch/sh/kernel/vmlinux.lds.S b/arch/sh/kernel/vmlinux.lds.S
index 4c5b57e9c3c..0696402f446 100644
--- a/arch/sh/kernel/vmlinux.lds.S
+++ b/arch/sh/kernel/vmlinux.lds.S
@@ -97,18 +97,20 @@ SECTIONS
__initramfs_end = .;
#endif
+ . = ALIGN(4);
__machvec_start = .;
- .init.machvec : { *(.init.machvec) }
+ .machvec.init : { *(.machvec.init) }
__machvec_end = .;
- . = ALIGN(PAGE_SIZE);
- __init_end = .;
-
- . = ALIGN(4);
- __bss_start = .; /* BSS */
- .bss : { *(.bss) }
- . = ALIGN(4);
- _end = . ;
+ . = ALIGN(PAGE_SIZE);
+ .bss : {
+ __init_end = .;
+ __bss_start = .; /* BSS */
+ *(.bss.page_aligned)
+ *(.bss)
+ . = ALIGN(4);
+ _end = . ;
+ }
/* When something in the kernel is NOT compiled as a module, the
* module cleanup code and data are put into these segments. Both
diff --git a/arch/sh/lib/div64-generic.c b/arch/sh/lib/div64-generic.c
index c02473afd58..4bef3b5d964 100644
--- a/arch/sh/lib/div64-generic.c
+++ b/arch/sh/lib/div64-generic.c
@@ -4,16 +4,15 @@
#include <linux/types.h>
-extern u64 __xdiv64_32(u64 n, u32 d);
+extern uint64_t __xdiv64_32(u64 n, u32 d);
-u64 __div64_32(u64 *xp, u32 y)
+uint32_t __div64_32(u64 *xp, u32 y)
{
- u64 rem;
- u64 q = __xdiv64_32(*xp, y);
+ uint32_t rem;
+ uint64_t q = __xdiv64_32(*xp, y);
rem = *xp - q * y;
*xp = q;
return rem;
}
-
diff --git a/arch/sh/lib/div64.S b/arch/sh/lib/div64.S
index eefc275d64a..5ee7334ea64 100644
--- a/arch/sh/lib/div64.S
+++ b/arch/sh/lib/div64.S
@@ -1,12 +1,12 @@
/*
- * unsigned long long __xdiv64_32(unsigned long long n, unsigned long d);
+ * unsigned long __xdiv64_32(unsigned long long n, unsigned long d);
*/
#include <linux/linkage.h>
.text
ENTRY(__xdiv64_32)
-#ifdef __LITTLE_ENDIAN__
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
mov r4, r0
mov r5, r1
#else
@@ -34,7 +34,7 @@ ENTRY(__xdiv64_32)
rotcl r0
div1 r6, r1
.endr
-#ifdef __LITTLE_ENDIAN__
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
mov r2, r1
rts
rotcl r0
diff --git a/arch/sh/math-emu/math.c b/arch/sh/math-emu/math.c
index a38e1eed9e7..ac2d7abd256 100644
--- a/arch/sh/math-emu/math.c
+++ b/arch/sh/math-emu/math.c
@@ -507,6 +507,7 @@ static int ieee_fpe_handler(struct pt_regs *regs)
unsigned short insn = *(unsigned short *)regs->pc;
unsigned short finsn;
unsigned long nextpc;
+ siginfo_t info;
int nib[4] = {
(insn >> 12) & 0xf,
(insn >> 8) & 0xf,
@@ -559,9 +560,11 @@ static int ieee_fpe_handler(struct pt_regs *regs)
~(FPSCR_CAUSE_MASK | FPSCR_FLAG_MASK);
set_tsk_thread_flag(tsk, TIF_USEDFPU);
} else {
- tsk->thread.trap_no = 11;
- tsk->thread.error_code = 0;
- force_sig(SIGFPE, tsk);
+ info.si_signo = SIGFPE;
+ info.si_errno = 0;
+ info.si_code = FPE_FLTINV;
+ info.si_addr = (void __user *)regs->pc;
+ force_sig_info(SIGFPE, &info, tsk);
}
regs->pc = nextpc;
@@ -576,14 +579,17 @@ asmlinkage void do_fpu_error(unsigned long r4, unsigned long r5,
struct pt_regs regs)
{
struct task_struct *tsk = current;
+ siginfo_t info;
if (ieee_fpe_handler (&regs))
return;
regs.pc += 2;
- tsk->thread.trap_no = 11;
- tsk->thread.error_code = 0;
- force_sig(SIGFPE, tsk);
+ info.si_signo = SIGFPE;
+ info.si_errno = 0;
+ info.si_code = FPE_FLTINV;
+ info.si_addr = (void __user *)regs.pc;
+ force_sig_info(SIGFPE, &info, tsk);
}
/**
diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
index 253346d7b31..28d79a474cd 100644
--- a/arch/sh/mm/Kconfig
+++ b/arch/sh/mm/Kconfig
@@ -1,5 +1,3 @@
-menu "Processor selection"
-
#
# Processor families
#
@@ -38,27 +36,31 @@ config CPU_SUBTYPE_ST40
config CPU_SHX2
bool
+config CPU_SHX3
+ bool
+
+choice
+ prompt "Processor sub-type selection"
+
#
# Processor subtypes
#
-comment "SH-2 Processor Support"
-
-config CPU_SUBTYPE_SH7604
- bool "Support SH7604 processor"
- select CPU_SH2
+# SH-2 Processor Support
config CPU_SUBTYPE_SH7619
bool "Support SH7619 processor"
select CPU_SH2
+ select CPU_HAS_IPR_IRQ
-comment "SH-2A Processor Support"
+# SH-2A Processor Support
config CPU_SUBTYPE_SH7206
bool "Support SH7206 processor"
select CPU_SH2A
+ select CPU_HAS_IPR_IRQ
-comment "SH-3 Processor Support"
+# SH-3 Processor Support
config CPU_SUBTYPE_SH7300
bool "Support SH7300 processor"
@@ -113,7 +115,7 @@ config CPU_SUBTYPE_SH7712
help
Select SH7712 if you have a SH3-DSP SH7712 CPU.
-comment "SH-4 Processor Support"
+# SH-4 Processor Support
config CPU_SUBTYPE_SH7750
bool "Support SH7750 processor"
@@ -125,7 +127,7 @@ config CPU_SUBTYPE_SH7750
config CPU_SUBTYPE_SH7091
bool "Support SH7091 processor"
select CPU_SH4
- select CPU_SUBTYPE_SH7750
+ select CPU_HAS_IPR_IRQ
help
Select SH7091 if you have an SH-4 based Sega device (such as
the Dreamcast, Naomi, and Naomi 2).
@@ -133,13 +135,11 @@ config CPU_SUBTYPE_SH7091
config CPU_SUBTYPE_SH7750R
bool "Support SH7750R processor"
select CPU_SH4
- select CPU_SUBTYPE_SH7750
select CPU_HAS_IPR_IRQ
config CPU_SUBTYPE_SH7750S
bool "Support SH7750S processor"
select CPU_SH4
- select CPU_SUBTYPE_SH7750
select CPU_HAS_IPR_IRQ
config CPU_SUBTYPE_SH7751
@@ -153,7 +153,6 @@ config CPU_SUBTYPE_SH7751
config CPU_SUBTYPE_SH7751R
bool "Support SH7751R processor"
select CPU_SH4
- select CPU_SUBTYPE_SH7751
select CPU_HAS_IPR_IRQ
config CPU_SUBTYPE_SH7760
@@ -166,7 +165,7 @@ config CPU_SUBTYPE_SH4_202
bool "Support SH4-202 processor"
select CPU_SH4
-comment "ST40 Processor Support"
+# ST40 Processor Support
config CPU_SUBTYPE_ST40STB1
bool "Support ST40STB1/ST40RA processors"
@@ -181,7 +180,7 @@ config CPU_SUBTYPE_ST40GX1
help
Select ST40GX1 if you have a ST40GX1 CPU.
-comment "SH-4A Processor Support"
+# SH-4A Processor Support
config CPU_SUBTYPE_SH7770
bool "Support SH7770 processor"
@@ -198,7 +197,13 @@ config CPU_SUBTYPE_SH7785
select CPU_SHX2
select CPU_HAS_INTC2_IRQ
-comment "SH4AL-DSP Processor Support"
+config CPU_SUBTYPE_SHX3
+ bool "Support SH-X3 processor"
+ select CPU_SH4A
+ select CPU_SHX3
+ select CPU_HAS_INTC2_IRQ
+
+# SH4AL-DSP Processor Support
config CPU_SUBTYPE_SH73180
bool "Support SH73180 processor"
@@ -213,8 +218,10 @@ config CPU_SUBTYPE_SH7722
select CPU_SH4AL_DSP
select CPU_SHX2
select CPU_HAS_IPR_IRQ
+ select ARCH_SPARSEMEM_ENABLE
+ select SYS_SUPPORTS_NUMA
-endmenu
+endchoice
menu "Memory management options"
@@ -266,7 +273,7 @@ config MEMORY_SIZE
config 32BIT
bool "Support 32-bit physical addressing through PMB"
- depends on CPU_SH4A && MMU && (!X2TLB || BROKEN)
+ depends on MMU && (CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785)
default y
help
If you say Y here, physical addressing will be extended to
@@ -295,6 +302,17 @@ config VSYSCALL
For systems with an MMU that can afford to give up a page,
(the default value) say Y.
+config NUMA
+ bool "Non Uniform Memory Access (NUMA) Support"
+ depends on MMU && SYS_SUPPORTS_NUMA && EXPERIMENTAL
+ default n
+ help
+ Some SH systems have many various memories scattered around
+ the address space, each with varying latencies. This enables
+ support for these blocks by binding them to nodes and allowing
+ memory policies to be used for prioritizing and controlling
+ allocation behaviour.
+
config NODES_SHIFT
int
default "1"
@@ -302,14 +320,34 @@ config NODES_SHIFT
config ARCH_FLATMEM_ENABLE
def_bool y
+ depends on !NUMA
+
+config ARCH_SPARSEMEM_ENABLE
+ def_bool y
+ select SPARSEMEM_STATIC
+
+config ARCH_SPARSEMEM_DEFAULT
+ def_bool y
config MAX_ACTIVE_REGIONS
int
+ default "2" if (CPU_SUBTYPE_SH7722 && SPARSEMEM)
default "1"
config ARCH_POPULATES_NODE_MAP
def_bool y
+config ARCH_SELECT_MEMORY_MODEL
+ def_bool y
+
+config ARCH_ENABLE_MEMORY_HOTPLUG
+ def_bool y
+ depends on SPARSEMEM
+
+config ARCH_MEMORY_PROBE
+ def_bool y
+ depends on MEMORY_HOTPLUG
+
choice
prompt "Kernel page size"
default PAGE_SIZE_4KB
@@ -394,15 +432,4 @@ config SH_WRITETHROUGH
If unsure, say N.
-config SH_OCRAM
- bool "Operand Cache RAM (OCRAM) support"
- help
- Selecting this option will automatically tear down the number of
- sets in the dcache by half, which in turn exposes a memory range.
-
- The addresses for the OC RAM base will vary according to the
- processor version. Consult vendor documentation for specifics.
-
- If unsure, say N.
-
endmenu
diff --git a/arch/sh/mm/Makefile b/arch/sh/mm/Makefile
index 3ffd7f68c0a..d677d7f3afc 100644
--- a/arch/sh/mm/Makefile
+++ b/arch/sh/mm/Makefile
@@ -8,9 +8,6 @@ obj-$(CONFIG_CPU_SH2) += cache-sh2.o
obj-$(CONFIG_CPU_SH3) += cache-sh3.o
obj-$(CONFIG_CPU_SH4) += cache-sh4.o
-obj-$(CONFIG_DMA_PAGE_OPS) += pg-dma.o
-obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
-
mmu-y := fault-nommu.o tlb-nommu.o pg-nommu.o
mmu-$(CONFIG_MMU) := fault.o clear_page.o copy_page.o tlb-flush.o \
ioremap.o
@@ -27,5 +24,7 @@ obj-$(CONFIG_CPU_SH4) += tlb-sh4.o pg-sh4.o
obj-$(CONFIG_SH7705_CACHE_32KB) += pg-sh7705.o
endif
+obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
obj-$(CONFIG_SH7705_CACHE_32KB) += cache-sh7705.o
obj-$(CONFIG_32BIT) += pmb.o
+obj-$(CONFIG_NUMA) += numa.o
diff --git a/arch/sh/mm/fault.c b/arch/sh/mm/fault.c
index c878faa4ae4..0b3eaf6fbb2 100644
--- a/arch/sh/mm/fault.c
+++ b/arch/sh/mm/fault.c
@@ -32,7 +32,6 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs,
struct task_struct *tsk;
struct mm_struct *mm;
struct vm_area_struct * vma;
- unsigned long page;
int si_code;
siginfo_t info;
@@ -170,24 +169,38 @@ no_context:
* terminate things with extreme prejudice.
*
*/
- if (address < PAGE_SIZE)
- printk(KERN_ALERT "Unable to handle kernel NULL pointer dereference");
- else
- printk(KERN_ALERT "Unable to handle kernel paging request");
- printk(" at virtual address %08lx\n", address);
- printk(KERN_ALERT "pc = %08lx\n", regs->pc);
- page = (unsigned long)get_TTB();
- if (page) {
- page = ((unsigned long *) page)[address >> PGDIR_SHIFT];
- printk(KERN_ALERT "*pde = %08lx\n", page);
- if (page & _PAGE_PRESENT) {
- page &= PAGE_MASK;
- address &= 0x003ff000;
- page = ((unsigned long *) __va(page))[address >> PAGE_SHIFT];
- printk(KERN_ALERT "*pte = %08lx\n", page);
+
+ bust_spinlocks(1);
+
+ if (oops_may_print()) {
+ __typeof__(pte_val(__pte(0))) page;
+
+ if (address < PAGE_SIZE)
+ printk(KERN_ALERT "Unable to handle kernel NULL "
+ "pointer dereference");
+ else
+ printk(KERN_ALERT "Unable to handle kernel paging "
+ "request");
+ printk(" at virtual address %08lx\n", address);
+ printk(KERN_ALERT "pc = %08lx\n", regs->pc);
+ page = (unsigned long)get_TTB();
+ if (page) {
+ page = ((__typeof__(page) *) __va(page))[address >>
+ PGDIR_SHIFT];
+ printk(KERN_ALERT "*pde = %08lx\n", page);
+ if (page & _PAGE_PRESENT) {
+ page &= PAGE_MASK;
+ address &= 0x003ff000;
+ page = ((__typeof__(page) *)
+ __va(page))[address >>
+ PAGE_SHIFT];
+ printk(KERN_ALERT "*pte = %08lx\n", page);
+ }
}
}
+
die("Oops", regs, writeaccess);
+ bust_spinlocks(0);
do_exit(SIGKILL);
/*
diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c
index e0e644ff320..82b68c789a5 100644
--- a/arch/sh/mm/init.c
+++ b/arch/sh/mm/init.c
@@ -18,6 +18,7 @@
#include <asm/mmu_context.h>
#include <asm/tlb.h>
#include <asm/cacheflush.h>
+#include <asm/sections.h>
#include <asm/cache.h>
DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
@@ -36,14 +37,11 @@ void show_mem(void)
show_free_areas();
for_each_online_pgdat(pgdat) {
- struct page *page, *end;
- unsigned long flags;
+ unsigned long flags, i;
pgdat_resize_lock(pgdat, &flags);
- page = pgdat->node_mem_map;
- end = page + pgdat->node_spanned_pages;
-
- do {
+ for (i = 0; i < pgdat->node_spanned_pages; i++) {
+ struct page *page = pgdat_page_nr(pgdat, i);
total++;
if (PageReserved(page))
reserved++;
@@ -55,9 +53,7 @@ void show_mem(void)
free++;
else
shared += page_count(page) - 1;
- page++;
- } while (page < end);
-
+ }
pgdat_resize_unlock(pgdat, &flags);
}
@@ -137,16 +133,12 @@ void __set_fixmap(enum fixed_addresses idx, unsigned long phys, pgprot_t prot)
}
#endif /* CONFIG_MMU */
-/* References to section boundaries */
-
-extern char _text, _etext, _edata, __bss_start, _end;
-extern char __init_begin, __init_end;
-
/*
* paging_init() sets up the page tables
*/
void __init paging_init(void)
{
+ unsigned long max_zone_pfns[MAX_NR_ZONES];
int nid;
/* We don't need to map the kernel through the TLB, as
@@ -158,43 +150,39 @@ void __init paging_init(void)
* check for a null value. */
set_TTB(swapper_pg_dir);
+ memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
+
for_each_online_node(nid) {
pg_data_t *pgdat = NODE_DATA(nid);
- unsigned long max_zone_pfns[MAX_NR_ZONES];
unsigned long low, start_pfn;
- memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
-
start_pfn = pgdat->bdata->node_boot_start >> PAGE_SHIFT;
low = pgdat->bdata->node_low_pfn;
- max_zone_pfns[ZONE_NORMAL] = low;
- add_active_range(nid, start_pfn, low);
+ if (max_zone_pfns[ZONE_NORMAL] < low)
+ max_zone_pfns[ZONE_NORMAL] = low;
printk("Node %u: start_pfn = 0x%lx, low = 0x%lx\n",
nid, start_pfn, low);
-
- free_area_init_nodes(max_zone_pfns);
-
- printk("Node %u: mem_map starts at %p\n",
- pgdat->node_id, pgdat->node_mem_map);
}
+
+ free_area_init_nodes(max_zone_pfns);
}
static struct kcore_list kcore_mem, kcore_vmalloc;
void __init mem_init(void)
{
- int codesize, reservedpages, datasize, initsize;
+ int codesize, datasize, initsize;
int nid;
- reservedpages = 0;
+ num_physpages = 0;
+ high_memory = NULL;
for_each_online_node(nid) {
pg_data_t *pgdat = NODE_DATA(nid);
unsigned long node_pages = 0;
void *node_high_memory;
- int i;
num_physpages += pgdat->node_present_pages;
@@ -203,13 +191,9 @@ void __init mem_init(void)
totalram_pages += node_pages;
- for (i = 0; i < node_pages; i++)
- if (PageReserved(pgdat->node_mem_map + i))
- reservedpages++;
-
- node_high_memory = (void *)((pgdat->node_start_pfn +
- pgdat->node_spanned_pages) <<
- PAGE_SHIFT);
+ node_high_memory = (void *)__va((pgdat->node_start_pfn +
+ pgdat->node_spanned_pages) <<
+ PAGE_SHIFT);
if (node_high_memory > high_memory)
high_memory = node_high_memory;
}
@@ -239,11 +223,10 @@ void __init mem_init(void)
VMALLOC_END - VMALLOC_START);
printk(KERN_INFO "Memory: %luk/%luk available (%dk kernel code, "
- "%dk reserved, %dk data, %dk init)\n",
+ "%dk data, %dk init)\n",
(unsigned long) nr_free_pages() << (PAGE_SHIFT-10),
- totalram_pages << (PAGE_SHIFT-10),
+ num_physpages << (PAGE_SHIFT-10),
codesize >> 10,
- reservedpages << (PAGE_SHIFT-10),
datasize >> 10,
initsize >> 10);
@@ -264,7 +247,9 @@ void free_initmem(void)
free_page(addr);
totalram_pages++;
}
- printk ("Freeing unused kernel memory: %dk freed\n", (&__init_end - &__init_begin) >> 10);
+ printk("Freeing unused kernel memory: %ldk freed\n",
+ ((unsigned long)&__init_end -
+ (unsigned long)&__init_begin) >> 10);
}
#ifdef CONFIG_BLK_DEV_INITRD
@@ -277,6 +262,50 @@ void free_initrd_mem(unsigned long start, unsigned long end)
free_page(p);
totalram_pages++;
}
- printk ("Freeing initrd memory: %ldk freed\n", (end - start) >> 10);
+ printk("Freeing initrd memory: %ldk freed\n", (end - start) >> 10);
+}
+#endif
+
+#ifdef CONFIG_MEMORY_HOTPLUG
+void online_page(struct page *page)
+{
+ ClearPageReserved(page);
+ init_page_count(page);
+ __free_page(page);
+ totalram_pages++;
+ num_physpages++;
}
+
+int arch_add_memory(int nid, u64 start, u64 size)
+{
+ pg_data_t *pgdat;
+ unsigned long start_pfn = start >> PAGE_SHIFT;
+ unsigned long nr_pages = size >> PAGE_SHIFT;
+ int ret;
+
+ pgdat = NODE_DATA(nid);
+
+ /* We only have ZONE_NORMAL, so this is easy.. */
+ ret = __add_pages(pgdat->node_zones + ZONE_NORMAL, start_pfn, nr_pages);
+ if (unlikely(ret))
+ printk("%s: Failed, __add_pages() == %d\n", __FUNCTION__, ret);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(arch_add_memory);
+
+int remove_memory(u64 start, u64 size)
+{
+ return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(remove_memory);
+
+#ifdef CONFIG_NUMA
+int memory_add_physaddr_to_nid(u64 addr)
+{
+ /* Node 0 for now.. */
+ return 0;
+}
+EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid);
+#endif
#endif
diff --git a/arch/sh/mm/numa.c b/arch/sh/mm/numa.c
new file mode 100644
index 00000000000..8aff065dd30
--- /dev/null
+++ b/arch/sh/mm/numa.c
@@ -0,0 +1,92 @@
+/*
+ * arch/sh/mm/numa.c - Multiple node support for SH machines
+ *
+ * Copyright (C) 2007 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/module.h>
+#include <linux/bootmem.h>
+#include <linux/mm.h>
+#include <linux/numa.h>
+#include <linux/pfn.h>
+#include <asm/sections.h>
+
+static bootmem_data_t plat_node_bdata[MAX_NUMNODES];
+struct pglist_data *node_data[MAX_NUMNODES] __read_mostly;
+EXPORT_SYMBOL_GPL(node_data);
+
+/*
+ * On SH machines the conventional approach is to stash system RAM
+ * in node 0, and other memory blocks in to node 1 and up, ordered by
+ * latency. Each node's pgdat is node-local at the beginning of the node,
+ * immediately followed by the node mem map.
+ */
+void __init setup_memory(void)
+{
+ unsigned long free_pfn = PFN_UP(__pa(_end));
+
+ /*
+ * Node 0 sets up its pgdat at the first available pfn,
+ * and bumps it up before setting up the bootmem allocator.
+ */
+ NODE_DATA(0) = pfn_to_kaddr(free_pfn);
+ memset(NODE_DATA(0), 0, sizeof(struct pglist_data));
+ free_pfn += PFN_UP(sizeof(struct pglist_data));
+ NODE_DATA(0)->bdata = &plat_node_bdata[0];
+
+ /* Set up node 0 */
+ setup_bootmem_allocator(free_pfn);
+
+ /* Give the platforms a chance to hook up their nodes */
+ plat_mem_setup();
+}
+
+void __init setup_bootmem_node(int nid, unsigned long start, unsigned long end)
+{
+ unsigned long bootmap_pages, bootmap_start, bootmap_size;
+ unsigned long start_pfn, free_pfn, end_pfn;
+
+ /* Don't allow bogus node assignment */
+ BUG_ON(nid > MAX_NUMNODES || nid == 0);
+
+ /*
+ * The free pfn starts at the beginning of the range, and is
+ * advanced as necessary for pgdat and node map allocations.
+ */
+ free_pfn = start_pfn = start >> PAGE_SHIFT;
+ end_pfn = end >> PAGE_SHIFT;
+
+ add_active_range(nid, start_pfn, end_pfn);
+
+ /* Node-local pgdat */
+ NODE_DATA(nid) = pfn_to_kaddr(free_pfn);
+ free_pfn += PFN_UP(sizeof(struct pglist_data));
+ memset(NODE_DATA(nid), 0, sizeof(struct pglist_data));
+
+ NODE_DATA(nid)->bdata = &plat_node_bdata[nid];
+ NODE_DATA(nid)->node_start_pfn = start_pfn;
+ NODE_DATA(nid)->node_spanned_pages = end_pfn - start_pfn;
+
+ /* Node-local bootmap */
+ bootmap_pages = bootmem_bootmap_pages(end_pfn - start_pfn);
+ bootmap_start = (unsigned long)pfn_to_kaddr(free_pfn);
+ bootmap_size = init_bootmem_node(NODE_DATA(nid), free_pfn, start_pfn,
+ end_pfn);
+
+ free_bootmem_with_active_regions(nid, end_pfn);
+
+ /* Reserve the pgdat and bootmap space with the bootmem allocator */
+ reserve_bootmem_node(NODE_DATA(nid), start_pfn << PAGE_SHIFT,
+ sizeof(struct pglist_data));
+ reserve_bootmem_node(NODE_DATA(nid), free_pfn << PAGE_SHIFT,
+ bootmap_pages << PAGE_SHIFT);
+
+ /* It's up */
+ node_set_online(nid);
+
+ /* Kick sparsemem */
+ sparse_memory_present_with_active_regions(nid);
+}
diff --git a/arch/sh/mm/pg-dma.c b/arch/sh/mm/pg-dma.c
deleted file mode 100644
index bb23679369d..00000000000
--- a/arch/sh/mm/pg-dma.c
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * arch/sh/mm/pg-dma.c
- *
- * Fast clear_page()/copy_page() implementation using the SH DMAC
- *
- * Copyright (C) 2003 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <asm/semaphore.h>
-#include <asm/mmu_context.h>
-#include <asm/addrspace.h>
-#include <asm/atomic.h>
-#include <asm/page.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-
-/* Channel to use for page ops, must be dual-address mode capable. */
-static int dma_channel = CONFIG_DMA_PAGE_OPS_CHANNEL;
-
-static void copy_page_dma(void *to, void *from)
-{
- /*
- * This doesn't seem to get triggered until further along in the
- * boot process, at which point the DMAC is already initialized.
- * Fix this in the same fashion as clear_page_dma() in the event
- * that this crashes due to the DMAC not being initialized.
- */
-
- flush_icache_range((unsigned long)from, PAGE_SIZE);
- dma_write_page(dma_channel, (unsigned long)from, (unsigned long)to);
- dma_wait_for_completion(dma_channel);
-}
-
-static void clear_page_dma(void *to)
-{
- /*
- * We get invoked quite early on, if the DMAC hasn't been initialized
- * yet, fall back on the slow manual implementation.
- */
- if (dma_info[dma_channel].chan != dma_channel) {
- clear_page_slow(to);
- return;
- }
-
- dma_write_page(dma_channel, (unsigned long)empty_zero_page,
- (unsigned long)to);
-
- /*
- * FIXME: Something is a bit racy here, if we poll the counter right
- * away, we seem to lock. flushing the page from the dcache doesn't
- * seem to make a difference one way or the other, though either a full
- * icache or dcache flush does.
- *
- * The location of this is important as well, and must happen prior to
- * the completion loop but after the transfer was initiated.
- *
- * Oddly enough, this doesn't appear to be an issue for copy_page()..
- */
- flush_icache_range((unsigned long)to, PAGE_SIZE);
-
- dma_wait_for_completion(dma_channel);
-}
-
-static int __init pg_dma_init(void)
-{
- int ret;
-
- ret = request_dma(dma_channel, "page ops");
- if (ret != 0)
- return ret;
-
- copy_page = copy_page_dma;
- clear_page = clear_page_dma;
-
- return ret;
-}
-
-static void __exit pg_dma_exit(void)
-{
- free_dma(dma_channel);
-}
-
-module_init(pg_dma_init);
-module_exit(pg_dma_exit);
-
-MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>");
-MODULE_DESCRIPTION("Optimized page copy/clear routines using a dual-address mode capable DMAC channel");
-MODULE_LICENSE("GPL");
-
diff --git a/arch/sh/tools/Makefile b/arch/sh/tools/Makefile
index 3c370a11329..567516b58ac 100644
--- a/arch/sh/tools/Makefile
+++ b/arch/sh/tools/Makefile
@@ -12,4 +12,5 @@
include/asm-sh/machtypes.h: $(src)/gen-mach-types $(src)/mach-types
@echo ' Generating $@'
+ $(Q)if [ ! -d include/asm-sh ]; then mkdir -p include/asm-sh; fi
$(Q)$(AWK) -f $^ > $@ || { rm -f $@; /bin/false; }
diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types
index fb40f188aff..4b5e9305092 100644
--- a/arch/sh/tools/mach-types
+++ b/arch/sh/tools/mach-types
@@ -18,7 +18,6 @@ SE SH_SOLUTION_ENGINE
HP6XX SH_HP6XX
HD64461 HD64461
HD64465 HD64465
-SATURN SH_SATURN
DREAMCAST SH_DREAMCAST
MPC1211 SH_MPC1211
SNAPGEAR SH_SECUREEDGE5410
@@ -34,3 +33,4 @@ R7785RP SH_R7785RP
TITAN SH_TITAN
SHMIN SH_SHMIN
7710VOIPGW SH_7710VOIPGW
+LBOXRE2 SH_LBOX_RE2