diff options
Diffstat (limited to 'arch')
131 files changed, 2168 insertions, 2059 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 483d316543a..8b768937c66 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -725,6 +725,7 @@ config ARCH_S3C64XX bool "Samsung S3C64XX" select ARCH_HAS_CPUFREQ select ARCH_REQUIRE_GPIOLIB + select ARM_AMBA select ARM_VIC select CLKDEV_LOOKUP select CLKSRC_SAMSUNG_PWM @@ -1055,6 +1056,8 @@ config ARM_TIMER_SP804 select CLKSRC_MMIO select CLKSRC_OF if OF +source "arch/arm/firmware/Kconfig" + source arch/arm/mm/Kconfig config ARM_NR_BANKS diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 1edf8ebd849..aa791d17179 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -267,6 +267,7 @@ core-$(CONFIG_KVM_ARM_HOST) += arch/arm/kvm/ core-y += arch/arm/kernel/ arch/arm/mm/ arch/arm/common/ core-y += arch/arm/net/ core-y += arch/arm/crypto/ +core-y += arch/arm/firmware/ core-y += $(machdirs) $(platdirs) drivers-$(CONFIG_OPROFILE) += arch/arm/oprofile/ diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 5839077fac9..402481775bb 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -30,6 +30,7 @@ dtb-$(CONFIG_ARCH_AT91) += pm9g45.dtb dtb-$(CONFIG_ARCH_AT91) += at91sam9n12ek.dtb # sam9x5 dtb-$(CONFIG_ARCH_AT91) += at91-ariag25.dtb +dtb-$(CONFIG_ARCH_AT91) += at91-cosino_mega2560.dtb dtb-$(CONFIG_ARCH_AT91) += at91sam9g15ek.dtb dtb-$(CONFIG_ARCH_AT91) += at91sam9g25ek.dtb dtb-$(CONFIG_ARCH_AT91) += at91sam9g35ek.dtb diff --git a/arch/arm/boot/dts/animeo_ip.dts b/arch/arm/boot/dts/animeo_ip.dts index 3a1de9eb511..3c4f6d983cb 100644 --- a/arch/arm/boot/dts/animeo_ip.dts +++ b/arch/arm/boot/dts/animeo_ip.dts @@ -90,34 +90,19 @@ nand-on-flash-bbt; status = "okay"; - at91bootstrap@0 { - label = "at91bootstrap"; - reg = <0x0 0x8000>; - }; - - barebox@8000 { + barebox@0 { label = "barebox"; - reg = <0x8000 0x40000>; - }; - - bareboxenv@48000 { - label = "bareboxenv"; - reg = <0x48000 0x8000>; - }; - - user_block@0x50000 { - label = "user_block"; - reg = <0x50000 0xb0000>; + reg = <0x0 0x58000>; }; - kernel@100000 { - label = "kernel"; - reg = <0x100000 0x1b0000>; + u_boot_env@58000 { + label = "u_boot_env"; + reg = <0x58000 0x8000>; }; - root@2b0000 { - label = "root"; - reg = <0x2b0000 0x1D50000>; + ubi@60000 { + label = "ubi"; + reg = <0x60000 0x1FA0000>; }; }; diff --git a/arch/arm/boot/dts/at91-cosino.dtsi b/arch/arm/boot/dts/at91-cosino.dtsi new file mode 100644 index 00000000000..2093c4d7cd6 --- /dev/null +++ b/arch/arm/boot/dts/at91-cosino.dtsi @@ -0,0 +1,122 @@ +/* + * at91-cosino.dtsi - Device Tree file for Cosino core module + * + * Copyright (C) 2013 - Rodolfo Giometti <giometti@linux.it> + * HCE Engineering + * + * Derived from at91sam9x5ek.dtsi by: + * Copyright (C) 2012 Atmel, + * 2012 Nicolas Ferre <nicolas.ferre@atmel.com> + * + * Licensed under GPLv2 or later. + */ + +#include "at91sam9g35.dtsi" + +/ { + model = "HCE Cosino core module"; + compatible = "hce,cosino", "atmel,at91sam9x5", "atmel,at91sam9"; + + chosen { + bootargs = "console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait"; + }; + + memory { + reg = <0x20000000 0x8000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + main_clock: clock@0 { + compatible = "atmel,osc", "fixed-clock"; + clock-frequency = <12000000>; + }; + }; + + ahb { + apb { + mmc0: mmc@f0008000 { + pinctrl-0 = < + &pinctrl_board_mmc0 + &pinctrl_mmc0_slot0_clk_cmd_dat0 + &pinctrl_mmc0_slot0_dat1_3>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>; + }; + }; + + dbgu: serial@fffff200 { + status = "okay"; + }; + + usart0: serial@f801c000 { + status = "okay"; + }; + + i2c0: i2c@f8010000 { + status = "okay"; + }; + + adc0: adc@f804c000 { + atmel,adc-clock-rate = <1000000>; + atmel,adc-ts-wires = <4>; + atmel,adc-ts-pressure-threshold = <10000>; + status = "okay"; + }; + + pinctrl@fffff400 { + mmc0 { + pinctrl_board_mmc0: mmc0-board { + atmel,pins = + <AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD15 gpio CD pin pull up and deglitch */ + }; + }; + }; + + watchdog@fffffe40 { + status = "okay"; + }; + }; + + nand0: nand@40000000 { + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + atmel,has-pmecc; /* Enable PMECC */ + atmel,pmecc-cap = <4>; + atmel,pmecc-sector-size = <512>; + nand-on-flash-bbt; + status = "okay"; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x40000>; + }; + + uboot@40000 { + label = "u-boot"; + reg = <0x40000 0x80000>; + }; + + ubootenv@c0000 { + label = "U-Boot Env"; + reg = <0xc0000 0x140000>; + }; + + kernel@200000 { + label = "kernel"; + reg = <0x200000 0x600000>; + }; + + rootfs@800000 { + label = "rootfs"; + reg = <0x800000 0x0f800000>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91-cosino_mega2560.dts b/arch/arm/boot/dts/at91-cosino_mega2560.dts new file mode 100644 index 00000000000..f9415dd11f1 --- /dev/null +++ b/arch/arm/boot/dts/at91-cosino_mega2560.dts @@ -0,0 +1,84 @@ +/* + * at91-cosino_mega2560.dts - Device Tree file for Cosino board with + * Mega 2560 extension + * + * Copyright (C) 2013 - Rodolfo Giometti <giometti@linux.it> + * HCE Engineering + * + * Derived from at91sam9g35ek.dts by: + * Copyright (C) 2012 Atmel, + * 2012 Nicolas Ferre <nicolas.ferre@atmel.com> + * + * Licensed under GPLv2 or later. + */ + +/dts-v1/; +#include "at91-cosino.dtsi" + +/ { + model = "HCE Cosino Mega 2560"; + compatible = "hce,cosino_mega2560", "atmel,at91sam9x5", "atmel,at91sam9"; + + ahb { + apb { + macb0: ethernet@f802c000 { + phy-mode = "rmii"; + status = "okay"; + }; + + adc0: adc@f804c000 { + atmel,adc-clock-rate = <1000000>; + atmel,adc-ts-wires = <4>; + atmel,adc-ts-pressure-threshold = <10000>; + status = "okay"; + }; + + + tsadcc: tsadcc@f804c000 { + status = "okay"; + }; + + rtc@fffffeb0 { + status = "okay"; + }; + + usart1: serial@f8020000 { + status = "okay"; + }; + + usart2: serial@f8024000 { + status = "okay"; + }; + + usb2: gadget@f803c000 { + atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; + + mmc1: mmc@f000c000 { + pinctrl-0 = < + &pinctrl_mmc1_slot0_clk_cmd_dat0 + &pinctrl_mmc1_slot0_dat1_3>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + non-removable; + }; + }; + }; + + usb0: ohci@00600000 { + status = "okay"; + num-ports = <3>; + atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW */ + &pioD 19 GPIO_ACTIVE_LOW + &pioD 20 GPIO_ACTIVE_LOW + >; + }; + + usb1: ehci@00700000 { + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi index f77065506f1..c61b16fba79 100644 --- a/arch/arm/boot/dts/at91rm9200.dtsi +++ b/arch/arm/boot/dts/at91rm9200.dtsi @@ -191,12 +191,12 @@ AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA18 periph A */ }; - pinctrl_uart0_rts: uart0_rts-0 { + pinctrl_uart0_cts: uart0_cts-0 { atmel,pins = <AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA20 periph A */ }; - pinctrl_uart0_cts: uart0_cts-0 { + pinctrl_uart0_rts: uart0_rts-0 { atmel,pins = <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA21 periph A */ }; diff --git a/arch/arm/boot/dts/at91rm9200ek.dts b/arch/arm/boot/dts/at91rm9200ek.dts index d2d72c3b44c..df6b0aa0e4d 100644 --- a/arch/arm/boot/dts/at91rm9200ek.dts +++ b/arch/arm/boot/dts/at91rm9200ek.dts @@ -29,10 +29,22 @@ ahb { apb { - dbgu: serial@fffff200 { + usb1: gadget@fffb0000 { + atmel,vbus-gpio = <&pioD 4 GPIO_ACTIVE_HIGH>; + atmel,pullup-gpio = <&pioD 5 GPIO_ACTIVE_HIGH>; status = "okay"; }; + macb0: ethernet@fffbc000 { + phy-mode = "rmii"; + status = "okay"; + + phy0: ethernet-phy { + interrupt-parent = <&pioC>; + interrupts = <4 IRQ_TYPE_EDGE_BOTH>; + }; + }; + usart1: serial@fffc4000 { pinctrl-0 = <&pinctrl_uart1 @@ -44,16 +56,6 @@ status = "okay"; }; - macb0: ethernet@fffbc000 { - phy-mode = "rmii"; - status = "okay"; - }; - - usb1: gadget@fffb0000 { - atmel,vbus-gpio = <&pioD 4 GPIO_ACTIVE_HIGH>; - status = "okay"; - }; - spi0: spi@fffe0000 { status = "okay"; cs-gpios = <&pioA 3 0>, <0>, <0>, <0>; @@ -63,12 +65,45 @@ reg = <0>; }; }; + + dbgu: serial@fffff200 { + status = "okay"; + }; }; usb0: ohci@00300000 { num-ports = <2>; status = "okay"; }; + + nor_flash@10000000 { + compatible = "cfi-flash"; + reg = <0x10000000 0x800000>; + linux,mtd-name = "physmap-flash.0"; + bank-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + barebox@0 { + label = "barebox"; + reg = <0x00000 0x40000>; + }; + + bareboxenv@40000 { + label = "bareboxenv"; + reg = <0x40000 0x10000>; + }; + + kernel@50000 { + label = "kernel"; + reg = <0x50000 0x300000>; + }; + + root@350000 { + label = "root"; + reg = <0x350000 0x4B0000>; + }; + }; }; leds { diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index d5bd65f7460..22e255ab696 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -366,6 +366,34 @@ }; }; + fb { + pinctrl_fb: fb-0 { + atmel,pins = + <AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC1 periph A */ + AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC2 periph A */ + AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC3 periph A */ + AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB9 periph B */ + AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC6 periph A */ + AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC7 periph A */ + AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC8 periph A */ + AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC9 periph A */ + AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC10 periph A */ + AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC11 periph A */ + AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC14 periph A */ + AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC15 periph A */ + AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC16 periph A */ + AT91_PIOC 12 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC12 periph B */ + AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC18 periph A */ + AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC19 periph A */ + AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC22 periph A */ + AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC23 periph A */ + AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC24 periph A */ + AT91_PIOC 17 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC17 periph B */ + AT91_PIOC 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC26 periph A */ + AT91_PIOC 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC27 periph A */ + }; + }; + pioA: gpio@fffff200 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff200 0x200>; @@ -549,6 +577,15 @@ }; }; + fb0: fb@0x00700000 { + compatible = "atmel,at91sam9263-lcdc"; + reg = <0x00700000 0x1000>; + interrupts = <26 IRQ_TYPE_LEVEL_HIGH 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fb>; + status = "disabled"; + }; + nand0: nand@40000000 { compatible = "atmel,at91rm9200-nand"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts index 70f835b55c0..15009c9f229 100644 --- a/arch/arm/boot/dts/at91sam9263ek.dts +++ b/arch/arm/boot/dts/at91sam9263ek.dts @@ -95,6 +95,36 @@ }; }; + fb0: fb@0x00700000 { + display = <&display0>; + status = "okay"; + + display0: display { + bits-per-pixel = <16>; + atmel,lcdcon-backlight; + atmel,dmacon = <0x1>; + atmel,lcdcon2 = <0x80008002>; + atmel,guard-time = <1>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <4965000>; + hactive = <240>; + vactive = <320>; + hback-porch = <1>; + hfront-porch = <33>; + vback-porch = <1>; + vfront-porch = <0>; + hsync-len = <5>; + vsync-len = <1>; + hsync-active = <1>; + vsync-active = <1>; + }; + }; + }; + }; + nand0: nand@40000000 { nand-bus-width = <8>; nand-ecc-mode = "soft"; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index c3e51483707..d7af9ecb85d 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -143,6 +143,22 @@ }; }; + i2c0 { + pinctrl_i2c0: i2c0-0 { + atmel,pins = + <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA21 periph A TWCK0 */ + AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA20 periph A TWD0 */ + }; + }; + + i2c1 { + pinctrl_i2c1: i2c1-0 { + atmel,pins = + <AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB11 periph A TWCK1 */ + AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB10 periph A TWD1 */ + }; + }; + usart0 { pinctrl_usart0: usart0-0 { atmel,pins = @@ -425,6 +441,42 @@ }; }; + fb { + pinctrl_fb: fb-0 { + atmel,pins = + <AT91_PIOE 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE0 periph A */ + AT91_PIOE 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE2 periph A */ + AT91_PIOE 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE3 periph A */ + AT91_PIOE 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE4 periph A */ + AT91_PIOE 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE5 periph A */ + AT91_PIOE 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE6 periph A */ + AT91_PIOE 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE7 periph A */ + AT91_PIOE 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE8 periph A */ + AT91_PIOE 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE9 periph A */ + AT91_PIOE 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE10 periph A */ + AT91_PIOE 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE11 periph A */ + AT91_PIOE 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE12 periph A */ + AT91_PIOE 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE13 periph A */ + AT91_PIOE 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE14 periph A */ + AT91_PIOE 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE15 periph A */ + AT91_PIOE 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE16 periph A */ + AT91_PIOE 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE17 periph A */ + AT91_PIOE 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE18 periph A */ + AT91_PIOE 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE19 periph A */ + AT91_PIOE 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE20 periph A */ + AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE21 periph A */ + AT91_PIOE 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE22 periph A */ + AT91_PIOE 23 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE23 periph A */ + AT91_PIOE 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE24 periph A */ + AT91_PIOE 25 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE25 periph A */ + AT91_PIOE 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE26 periph A */ + AT91_PIOE 27 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE27 periph A */ + AT91_PIOE 28 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE28 periph A */ + AT91_PIOE 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE29 periph A */ + AT91_PIOE 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PE30 periph A */ + }; + }; + pioA: gpio@fffff200 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff200 0x200>; @@ -542,6 +594,8 @@ compatible = "atmel,at91sam9g10-i2c"; reg = <0xfff84000 0x100>; interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -551,6 +605,8 @@ compatible = "atmel,at91sam9g10-i2c"; reg = <0xfff88000 0x100>; interrupts = <13 IRQ_TYPE_LEVEL_HIGH 6>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -618,6 +674,7 @@ compatible = "atmel,hsmci"; reg = <0xfff80000 0x600>; interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>; + pinctrl-names = "default"; dmas = <&dma 1 AT91_DMA_CFG_PER_ID(0)>; dma-names = "rxtx"; #address-cells = <1>; @@ -629,6 +686,7 @@ compatible = "atmel,hsmci"; reg = <0xfffd0000 0x600>; interrupts = <29 IRQ_TYPE_LEVEL_HIGH 0>; + pinctrl-names = "default"; dmas = <&dma 1 AT91_DMA_CFG_PER_ID(13)>; dma-names = "rxtx"; #address-cells = <1>; @@ -727,6 +785,15 @@ }; }; + fb0: fb@0x00500000 { + compatible = "atmel,at91sam9g45-lcdc"; + reg = <0x00500000 0x1000>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fb>; + status = "disabled"; + }; + nand0: nand@40000000 { compatible = "atmel,at91rm9200-nand"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts index a4b00e5c61c..7b76dbde8c4 100644 --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts @@ -123,6 +123,35 @@ }; }; + fb0: fb@0x00500000 { + display = <&display0>; + status = "okay"; + + display0: display { + bits-per-pixel = <32>; + atmel,lcdcon-backlight; + atmel,dmacon = <0x1>; + atmel,lcdcon2 = <0x80008002>; + atmel,guard-time = <9>; + atmel,lcd-wiring-mode = "RGB"; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <9000000>; + hactive = <480>; + vactive = <272>; + hback-porch = <1>; + hfront-porch = <1>; + vback-porch = <40>; + vfront-porch = <1>; + hsync-len = <45>; + vsync-len = <1>; + }; + }; + }; + }; + nand0: nand@40000000 { nand-bus-width = <8>; nand-ecc-mode = "soft"; diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi index 1e12aeff403..aa537ed13f0 100644 --- a/arch/arm/boot/dts/bcm2835.dtsi +++ b/arch/arm/boot/dts/bcm2835.dtsi @@ -85,6 +85,8 @@ reg = <0x7e205000 0x1000>; interrupts = <2 21>; clocks = <&clk_i2c>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; @@ -93,6 +95,8 @@ reg = <0x7e804000 0x1000>; interrupts = <2 21>; clocks = <&clk_i2c>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/cros5250-common.dtsi b/arch/arm/boot/dts/cros5250-common.dtsi index dc259e8b8a7..9b186ac06c8 100644 --- a/arch/arm/boot/dts/cros5250-common.dtsi +++ b/arch/arm/boot/dts/cros5250-common.dtsi @@ -27,6 +27,13 @@ i2c2_bus: i2c2-bus { samsung,pin-pud = <0>; }; + + max77686_irq: max77686-irq { + samsung,pins = "gpx3-2"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; }; i2c@12C60000 { @@ -35,6 +42,11 @@ max77686@09 { compatible = "maxim,max77686"; + interrupt-parent = <&gpx3>; + interrupts = <2 0>; + pinctrl-names = "default"; + pinctrl-0 = <&max77686_irq>; + wakeup-source; reg = <0x09>; voltage-regulators { diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 59154dc15fe..fb28b2ecb1d 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -161,7 +161,7 @@ clocks = <&clks 197>, <&clks 3>, <&clks 197>, <&clks 107>, <&clks 0>, <&clks 118>, - <&clks 62>, <&clks 139>, + <&clks 0>, <&clks 139>, <&clks 0>; clock-names = "core", "rxtx0", "rxtx1", "rxtx2", diff --git a/arch/arm/boot/dts/omap-zoom-common.dtsi b/arch/arm/boot/dts/omap-zoom-common.dtsi index b0ee342598f..68221fab978 100644 --- a/arch/arm/boot/dts/omap-zoom-common.dtsi +++ b/arch/arm/boot/dts/omap-zoom-common.dtsi @@ -13,7 +13,7 @@ * they probably share the same GPIO IRQ * REVISIT: Add timing support from slls644g.pdf */ - 8250@3,0 { + uart@3,0 { compatible = "ns16550a"; reg = <3 0 0x100>; bank-width = <2>; diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi index a2bfcde858a..d0c5b37e248 100644 --- a/arch/arm/boot/dts/omap2.dtsi +++ b/arch/arm/boot/dts/omap2.dtsi @@ -9,6 +9,7 @@ */ #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/pinctrl/omap.h> #include "skeleton.dtsi" @@ -21,6 +22,8 @@ serial0 = &uart1; serial1 = &uart2; serial2 = &uart3; + i2c0 = &i2c1; + i2c1 = &i2c2; }; cpus { @@ -53,6 +56,28 @@ ranges; ti,hwmods = "l3_main"; + aes: aes@480a6000 { + compatible = "ti,omap2-aes"; + ti,hwmods = "aes"; + reg = <0x480a6000 0x50>; + dmas = <&sdma 9 &sdma 10>; + dma-names = "tx", "rx"; + }; + + hdq1w: 1w@480b2000 { + compatible = "ti,omap2420-1w"; + ti,hwmods = "hdq1w"; + reg = <0x480b2000 0x1000>; + interrupts = <58>; + }; + + mailbox: mailbox@48094000 { + compatible = "ti,omap2-mailbox"; + ti,hwmods = "mailbox"; + reg = <0x48094000 0x200>; + interrupts = <26>; + }; + intc: interrupt-controller@1 { compatible = "ti,omap2-intc"; interrupt-controller; @@ -63,6 +88,7 @@ sdma: dma-controller@48056000 { compatible = "ti,omap2430-sdma", "ti,omap2420-sdma"; + ti,hwmods = "dma"; reg = <0x48056000 0x1000>; interrupts = <12>, <13>, @@ -73,21 +99,91 @@ #dma-requests = <64>; }; + i2c1: i2c@48070000 { + compatible = "ti,omap2-i2c"; + ti,hwmods = "i2c1"; + reg = <0x48070000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <56>; + dmas = <&sdma 27 &sdma 28>; + dma-names = "tx", "rx"; + }; + + i2c2: i2c@48072000 { + compatible = "ti,omap2-i2c"; + ti,hwmods = "i2c2"; + reg = <0x48072000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <57>; + dmas = <&sdma 29 &sdma 30>; + dma-names = "tx", "rx"; + }; + + mcspi1: mcspi@48098000 { + compatible = "ti,omap2-mcspi"; + ti,hwmods = "mcspi1"; + reg = <0x48098000 0x100>; + interrupts = <65>; + dmas = <&sdma 35 &sdma 36 &sdma 37 &sdma 38 + &sdma 39 &sdma 40 &sdma 41 &sdma 42>; + dma-names = "tx0", "rx0", "tx1", "rx1", + "tx2", "rx2", "tx3", "rx3"; + }; + + mcspi2: mcspi@4809a000 { + compatible = "ti,omap2-mcspi"; + ti,hwmods = "mcspi2"; + reg = <0x4809a000 0x100>; + interrupts = <66>; + dmas = <&sdma 43 &sdma 44 &sdma 45 &sdma 46>; + dma-names = "tx0", "rx0", "tx1", "rx1"; + }; + + rng: rng@480a0000 { + compatible = "ti,omap2-rng"; + ti,hwmods = "rng"; + reg = <0x480a0000 0x50>; + interrupts = <36>; + }; + + sham: sham@480a4000 { + compatible = "ti,omap2-sham"; + ti,hwmods = "sham"; + reg = <0x480a4000 0x64>; + interrupts = <51>; + dmas = <&sdma 13>; + dma-names = "rx"; + }; + uart1: serial@4806a000 { compatible = "ti,omap2-uart"; ti,hwmods = "uart1"; + reg = <0x4806a000 0x2000>; + interrupts = <72>; + dmas = <&sdma 49 &sdma 50>; + dma-names = "tx", "rx"; clock-frequency = <48000000>; }; uart2: serial@4806c000 { compatible = "ti,omap2-uart"; ti,hwmods = "uart2"; + reg = <0x4806c000 0x400>; + interrupts = <73>; + dmas = <&sdma 51 &sdma 52>; + dma-names = "tx", "rx"; clock-frequency = <48000000>; }; uart3: serial@4806e000 { compatible = "ti,omap2-uart"; ti,hwmods = "uart3"; + reg = <0x4806e000 0x400>; + interrupts = <74>; + dmas = <&sdma 53 &sdma 54>; + dma-names = "tx", "rx"; clock-frequency = <48000000>; }; diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi index c8f9c55169e..60c605de22d 100644 --- a/arch/arm/boot/dts/omap2420.dtsi +++ b/arch/arm/boot/dts/omap2420.dtsi @@ -114,6 +114,15 @@ dma-names = "tx", "rx"; }; + msdi1: mmc@4809c000 { + compatible = "ti,omap2420-mmc"; + ti,hwmods = "msdi1"; + reg = <0x4809c000 0x80>; + interrupts = <83>; + dmas = <&sdma 61 &sdma 62>; + dma-names = "tx", "rx"; + }; + timer1: timer@48028000 { compatible = "ti,omap2420-timer"; reg = <0x48028000 0x400>; @@ -121,5 +130,19 @@ ti,hwmods = "timer1"; ti,timer-alwon; }; + + wd_timer2: wdt@48022000 { + compatible = "ti,omap2-wdt"; + ti,hwmods = "wd_timer2"; + reg = <0x48022000 0x80>; + }; }; }; + +&i2c1 { + compatible = "ti,omap2420-i2c"; +}; + +&i2c2 { + compatible = "ti,omap2420-i2c"; +}; diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi index c535a5a2b27..d624345666f 100644 --- a/arch/arm/boot/dts/omap2430.dtsi +++ b/arch/arm/boot/dts/omap2430.dtsi @@ -175,6 +175,25 @@ dma-names = "tx", "rx"; }; + mmc1: mmc@4809c000 { + compatible = "ti,omap2-hsmmc"; + reg = <0x4809c000 0x200>; + interrupts = <83>; + ti,hwmods = "mmc1"; + ti,dual-volt; + dmas = <&sdma 61>, <&sdma 62>; + dma-names = "tx", "rx"; + }; + + mmc2: mmc@480b4000 { + compatible = "ti,omap2-hsmmc"; + reg = <0x480b4000 0x200>; + interrupts = <86>; + ti,hwmods = "mmc2"; + dmas = <&sdma 47>, <&sdma 48>; + dma-names = "tx", "rx"; + }; + timer1: timer@49018000 { compatible = "ti,omap2420-timer"; reg = <0x49018000 0x400>; @@ -182,5 +201,35 @@ ti,hwmods = "timer1"; ti,timer-alwon; }; + + mcspi3: mcspi@480b8000 { + compatible = "ti,omap2-mcspi"; + ti,hwmods = "mcspi3"; + reg = <0x480b8000 0x100>; + interrupts = <91>; + dmas = <&sdma 15 &sdma 16 &sdma 23 &sdma 24>; + dma-names = "tx0", "rx0", "tx1", "rx1"; + }; + + usb_otg_hs: usb_otg_hs@480ac000 { + compatible = "ti,omap2-musb"; + ti,hwmods = "usb_otg_hs"; + reg = <0x480ac000 0x1000>; + interrupts = <93>; + }; + + wd_timer2: wdt@49016000 { + compatible = "ti,omap2-wdt"; + ti,hwmods = "wd_timer2"; + reg = <0x49016000 0x80>; + }; }; }; + +&i2c1 { + compatible = "ti,omap2430-i2c"; +}; + +&i2c2 { + compatible = "ti,omap2430-i2c"; +}; diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index 5cdaba4cea8..070c5c3a229 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -13,6 +13,7 @@ #include <dt-bindings/pinctrl/at91.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clk/at91.h> / { model = "Atmel SAMA5D3 family SoC"; @@ -56,6 +57,14 @@ reg = <0x20000000 0x8000000>; }; + clocks { + adc_op_clk: adc_op_clk{ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <20000000>; + }; + }; + ahb { compatible = "simple-bus"; #address-cells = <1>; @@ -79,6 +88,8 @@ status = "disabled"; #address-cells = <1>; #size-cells = <0>; + clocks = <&mci0_clk>; + clock-names = "mci_clk"; }; spi0: spi@f0004000 { @@ -92,6 +103,8 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; + clocks = <&spi0_clk>; + clock-names = "spi_clk"; status = "disabled"; }; @@ -101,6 +114,8 @@ interrupts = <38 IRQ_TYPE_LEVEL_HIGH 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; + clocks = <&ssc0_clk>; + clock-names = "pclk"; status = "disabled"; }; @@ -108,6 +123,8 @@ compatible = "atmel,at91sam9x5-tcb"; reg = <0xf0010000 0x100>; interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&tcb0_clk>; + clock-names = "t0_clk"; }; i2c0: i2c@f0014000 { @@ -121,6 +138,7 @@ pinctrl-0 = <&pinctrl_i2c0>; #address-cells = <1>; #size-cells = <0>; + clocks = <&twi0_clk>; status = "disabled"; }; @@ -135,6 +153,7 @@ pinctrl-0 = <&pinctrl_i2c1>; #address-cells = <1>; #size-cells = <0>; + clocks = <&twi1_clk>; status = "disabled"; }; @@ -144,6 +163,8 @@ interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart0>; + clocks = <&usart0_clk>; + clock-names = "usart"; status = "disabled"; }; @@ -153,6 +174,8 @@ interrupts = <13 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1>; + clocks = <&usart1_clk>; + clock-names = "usart"; status = "disabled"; }; @@ -174,6 +197,8 @@ status = "disabled"; #address-cells = <1>; #size-cells = <0>; + clocks = <&mci1_clk>; + clock-names = "mci_clk"; }; spi1: spi@f8008000 { @@ -187,6 +212,8 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; + clocks = <&spi1_clk>; + clock-names = "spi_clk"; status = "disabled"; }; @@ -196,6 +223,8 @@ interrupts = <39 IRQ_TYPE_LEVEL_HIGH 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; + clocks = <&ssc1_clk>; + clock-names = "pclk"; status = "disabled"; }; @@ -219,6 +248,9 @@ &pinctrl_adc0_ad10 &pinctrl_adc0_ad11 >; + clocks = <&adc_clk>, + <&adc_op_clk>; + clock-names = "adc_clk", "adc_op_clk"; atmel,adc-channel-base = <0x50>; atmel,adc-channels-used = <0xfff>; atmel,adc-drdy-mask = <0x1000000>; @@ -272,8 +304,11 @@ dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(11)>, <&dma1 2 AT91_DMA_CFG_PER_ID(12)>; dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; #address-cells = <1>; #size-cells = <0>; + clocks = <&twi2_clk>; status = "disabled"; }; @@ -283,6 +318,8 @@ interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart2>; + clocks = <&usart2_clk>; + clock-names = "usart"; status = "disabled"; }; @@ -292,25 +329,35 @@ interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart3>; + clocks = <&usart3_clk>; + clock-names = "usart"; status = "disabled"; }; sha@f8034000 { - compatible = "atmel,sam9g46-sha"; + compatible = "atmel,at91sam9g46-sha"; reg = <0xf8034000 0x100>; interrupts = <42 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(17)>; + dma-names = "tx"; }; aes@f8038000 { - compatible = "atmel,sam9g46-aes"; + compatible = "atmel,at91sam9g46-aes"; reg = <0xf8038000 0x100>; - interrupts = <43 4 0>; + interrupts = <43 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(18)>, + <&dma1 2 AT91_DMA_CFG_PER_ID(19)>; + dma-names = "tx", "rx"; }; tdes@f803c000 { - compatible = "atmel,sam9g46-tdes"; + compatible = "atmel,at91sam9g46-tdes"; reg = <0xf803c000 0x100>; interrupts = <44 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(20)>, + <&dma1 2 AT91_DMA_CFG_PER_ID(21)>; + dma-names = "tx", "rx"; }; dma0: dma-controller@ffffe600 { @@ -318,6 +365,8 @@ reg = <0xffffe600 0x200>; interrupts = <30 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <2>; + clocks = <&dma0_clk>; + clock-names = "dma_clk"; }; dma1: dma-controller@ffffe800 { @@ -325,6 +374,8 @@ reg = <0xffffe800 0x200>; interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <2>; + clocks = <&dma1_clk>; + clock-names = "dma_clk"; }; ramc0: ramc@ffffea00 { @@ -338,6 +389,8 @@ interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; + clocks = <&dbgu_clk>; + clock-names = "usart"; status = "disabled"; }; @@ -443,6 +496,14 @@ }; }; + i2c2 { + pinctrl_i2c2: i2c2-0 { + atmel,pins = + <AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE /* TWD2 pin, conflicts with LCDDAT18, ISI_D2 */ + AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* TWCK2 pin, conflicts with LCDDAT19, ISI_D3 */ + }; + }; + isi { pinctrl_isi: isi-0 { atmel,pins = @@ -626,6 +687,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioA_clk>; }; pioB: gpio@fffff400 { @@ -636,6 +698,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioB_clk>; }; pioC: gpio@fffff600 { @@ -646,6 +709,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioC_clk>; }; pioD: gpio@fffff800 { @@ -656,6 +720,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioD_clk>; }; pioE: gpio@fffffa00 { @@ -666,12 +731,334 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioE_clk>; }; }; pmc: pmc@fffffc00 { - compatible = "atmel,at91rm9200-pmc"; + compatible = "atmel,sama5d3-pmc"; reg = <0xfffffc00 0x120>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + clk32k: slck { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + + main: mainck { + compatible = "atmel,at91rm9200-clk-main"; + #clock-cells = <0>; + interrupt-parent = <&pmc>; + interrupts = <AT91_PMC_MOSCS>; + clocks = <&clk32k>; + }; + + plla: pllack { + compatible = "atmel,sama5d3-clk-pll"; + #clock-cells = <0>; + interrupt-parent = <&pmc>; + interrupts = <AT91_PMC_LOCKA>; + clocks = <&main>; + reg = <0>; + atmel,clk-input-range = <8000000 50000000>; + #atmel,pll-clk-output-range-cells = <4>; + atmel,pll-clk-output-ranges = <400000000 1000000000 0 0>; + }; + + plladiv: plladivck { + compatible = "atmel,at91sam9x5-clk-plldiv"; + #clock-cells = <0>; + clocks = <&plla>; + }; + + utmi: utmick { + compatible = "atmel,at91sam9x5-clk-utmi"; + #clock-cells = <0>; + interrupt-parent = <&pmc>; + interrupts = <AT91_PMC_LOCKU>; + clocks = <&main>; + }; + + mck: masterck { + compatible = "atmel,at91sam9x5-clk-master"; + #clock-cells = <0>; + interrupt-parent = <&pmc>; + interrupts = <AT91_PMC_MCKRDY>; + clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>; + atmel,clk-output-range = <0 166000000>; + atmel,clk-divisors = <1 2 4 3>; + }; + + usb: usbck { + compatible = "atmel,at91sam9x5-clk-usb"; + #clock-cells = <0>; + clocks = <&plladiv>, <&utmi>; + }; + + prog: progck { + compatible = "atmel,at91sam9x5-clk-programmable"; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&pmc>; + clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>; + + prog0: prog0 { + #clock-cells = <0>; + reg = <0>; + interrupts = <AT91_PMC_PCKRDY(0)>; + }; + + prog1: prog1 { + #clock-cells = <0>; + reg = <1>; + interrupts = <AT91_PMC_PCKRDY(1)>; + }; + + prog2: prog2 { + #clock-cells = <0>; + reg = <2>; + interrupts = <AT91_PMC_PCKRDY(2)>; + }; + }; + + smd: smdclk { + compatible = "atmel,at91sam9x5-clk-smd"; + #clock-cells = <0>; + clocks = <&plladiv>, <&utmi>; + }; + + systemck { + compatible = "atmel,at91rm9200-clk-system"; + #address-cells = <1>; + #size-cells = <0>; + + ddrck: ddrck { + #clock-cells = <0>; + reg = <2>; + clocks = <&mck>; + }; + + smdck: smdck { + #clock-cells = <0>; + reg = <4>; + clocks = <&smd>; + }; + + uhpck: uhpck { + #clock-cells = <0>; + reg = <6>; + clocks = <&usb>; + }; + + udpck: udpck { + #clock-cells = <0>; + reg = <7>; + clocks = <&usb>; + }; + + pck0: pck0 { + #clock-cells = <0>; + reg = <8>; + clocks = <&prog0>; + }; + + pck1: pck1 { + #clock-cells = <0>; + reg = <9>; + clocks = <&prog1>; + }; + + pck2: pck2 { + #clock-cells = <0>; + reg = <10>; + clocks = <&prog2>; + }; + }; + + periphck { + compatible = "atmel,at91sam9x5-clk-peripheral"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&mck>; + + dbgu_clk: dbgu_clk { + #clock-cells = <0>; + reg = <2>; + }; + + pioA_clk: pioA_clk { + #clock-cells = <0>; + reg = <6>; + }; + + pioB_clk: pioB_clk { + #clock-cells = <0>; + reg = <7>; + }; + + pioC_clk: pioC_clk { + #clock-cells = <0>; + reg = <8>; + }; + + pioD_clk: pioD_clk { + #clock-cells = <0>; + reg = <9>; + }; + + pioE_clk: pioE_clk { + #clock-cells = <0>; + reg = <10>; + }; + + usart0_clk: usart0_clk { + #clock-cells = <0>; + reg = <12>; + atmel,clk-output-range = <0 66000000>; + }; + + usart1_clk: usart1_clk { + #clock-cells = <0>; + reg = <13>; + atmel,clk-output-range = <0 66000000>; + }; + + usart2_clk: usart2_clk { + #clock-cells = <0>; + reg = <14>; + atmel,clk-output-range = <0 66000000>; + }; + + usart3_clk: usart3_clk { + #clock-cells = <0>; + reg = <15>; + atmel,clk-output-range = <0 66000000>; + }; + + twi0_clk: twi0_clk { + reg = <18>; + #clock-cells = <0>; + atmel,clk-output-range = <0 16625000>; + }; + + twi1_clk: twi1_clk { + #clock-cells = <0>; + reg = <19>; + atmel,clk-output-range = <0 16625000>; + }; + + twi2_clk: twi2_clk { + #clock-cells = <0>; + reg = <20>; + atmel,clk-output-range = <0 16625000>; + }; + + mci0_clk: mci0_clk { + #clock-cells = <0>; + reg = <21>; + }; + + mci1_clk: mci1_clk { + #clock-cells = <0>; + reg = <22>; + }; + + spi0_clk: spi0_clk { + #clock-cells = <0>; + reg = <24>; + atmel,clk-output-range = <0 133000000>; + }; + + spi1_clk: spi1_clk { + #clock-cells = <0>; + reg = <25>; + atmel,clk-output-range = <0 133000000>; + }; + + tcb0_clk: tcb0_clk { + #clock-cells = <0>; + reg = <26>; + atmel,clk-output-range = <0 133000000>; + }; + + pwm_clk: pwm_clk { + #clock-cells = <0>; + reg = <28>; + }; + + adc_clk: adc_clk { + #clock-cells = <0>; + reg = <29>; + atmel,clk-output-range = <0 66000000>; + }; + + dma0_clk: dma0_clk { + #clock-cells = <0>; + reg = <30>; + }; + + dma1_clk: dma1_clk { + #clock-cells = <0>; + reg = <31>; + }; + + uhphs_clk: uhphs_clk { + #clock-cells = <0>; + reg = <32>; + }; + + udphs_clk: udphs_clk { + #clock-cells = <0>; + reg = <33>; + }; + + isi_clk: isi_clk { + #clock-cells = <0>; + reg = <37>; + }; + + ssc0_clk: ssc0_clk { + #clock-cells = <0>; + reg = <38>; + atmel,clk-output-range = <0 66000000>; + }; + + ssc1_clk: ssc1_clk { + #clock-cells = <0>; + reg = <39>; + atmel,clk-output-range = <0 66000000>; + }; + + sha_clk: sha_clk { + #clock-cells = <0>; + reg = <42>; + }; + + aes_clk: aes_clk { + #clock-cells = <0>; + reg = <43>; + }; + + tdes_clk: tdes_clk { + #clock-cells = <0>; + reg = <44>; + }; + + trng_clk: trng_clk { + #clock-cells = <0>; + reg = <45>; + }; + + fuse_clk: fuse_clk { + #clock-cells = <0>; + reg = <48>; + }; + }; }; rstc@fffffe00 { @@ -683,6 +1070,7 @@ compatible = "atmel,at91sam9260-pit"; reg = <0xfffffe30 0xf>; interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>; + clocks = <&mck>; }; watchdog@fffffe40 { @@ -705,6 +1093,8 @@ reg = <0x00500000 0x100000 0xf8030000 0x4000>; interrupts = <33 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&udphs_clk>, <&utmi>; + clock-names = "pclk", "hclk"; status = "disabled"; ep0 { @@ -817,6 +1207,9 @@ compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00600000 0x100000>; interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&usb>, <&uhphs_clk>, <&udphs_clk>, + <&uhpck>; + clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; @@ -824,6 +1217,8 @@ compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00700000 0x100000>; interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&usb>, <&uhphs_clk>, <&uhpck>; + clock-names = "usb_clk", "ehci_clk", "uhpck"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sama5d3_can.dtsi b/arch/arm/boot/dts/sama5d3_can.dtsi index 8ed3260cef6..a0775851cce 100644 --- a/arch/arm/boot/dts/sama5d3_can.dtsi +++ b/arch/arm/boot/dts/sama5d3_can.dtsi @@ -32,12 +32,30 @@ }; + pmc: pmc@fffffc00 { + periphck { + can0_clk: can0_clk { + #clock-cells = <0>; + reg = <40>; + atmel,clk-output-range = <0 66000000>; + }; + + can1_clk: can0_clk { + #clock-cells = <0>; + reg = <41>; + atmel,clk-output-range = <0 66000000>; + }; + }; + }; + can0: can@f000c000 { compatible = "atmel,at91sam9x5-can"; reg = <0xf000c000 0x300>; interrupts = <40 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_can0_rx_tx>; + clocks = <&can0_clk>; + clock-names = "can_clk"; status = "disabled"; }; @@ -47,6 +65,8 @@ interrupts = <41 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_can1_rx_tx>; + clocks = <&can1_clk>; + clock-names = "can_clk"; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/sama5d3_emac.dtsi b/arch/arm/boot/dts/sama5d3_emac.dtsi index 4d4f351f1f9..fe2af927631 100644 --- a/arch/arm/boot/dts/sama5d3_emac.dtsi +++ b/arch/arm/boot/dts/sama5d3_emac.dtsi @@ -31,12 +31,23 @@ }; }; + pmc: pmc@fffffc00 { + periphck { + macb1_clk: macb1_clk { + #clock-cells = <0>; + reg = <35>; + }; + }; + }; + macb1: ethernet@f802c000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xf802c000 0x100>; interrupts = <35 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb1_rmii>; + clocks = <&macb1_clk>, <&macb1_clk>; + clock-names = "hclk", "pclk"; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/sama5d3_gmac.dtsi b/arch/arm/boot/dts/sama5d3_gmac.dtsi index 0ba8be30ccd..a6cb0508762 100644 --- a/arch/arm/boot/dts/sama5d3_gmac.dtsi +++ b/arch/arm/boot/dts/sama5d3_gmac.dtsi @@ -64,12 +64,23 @@ }; }; + pmc: pmc@fffffc00 { + periphck { + macb0_clk: macb0_clk { + #clock-cells = <0>; + reg = <34>; + }; + }; + }; + macb0: ethernet@f0028000 { compatible = "cdns,pc302-gem", "cdns,gem"; reg = <0xf0028000 0x100>; interrupts = <34 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb0_data_rgmii &pinctrl_macb0_signal_rgmii>; + clocks = <&macb0_clk>, <&macb0_clk>; + clock-names = "hclk", "pclk"; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/sama5d3_lcd.dtsi b/arch/arm/boot/dts/sama5d3_lcd.dtsi index 01f52a79f8b..85d30270156 100644 --- a/arch/arm/boot/dts/sama5d3_lcd.dtsi +++ b/arch/arm/boot/dts/sama5d3_lcd.dtsi @@ -50,6 +50,23 @@ }; }; }; + + pmc: pmc@fffffc00 { + periphck { + lcdc_clk: lcdc_clk { + #clock-cells = <0>; + reg = <36>; + }; + }; + + systemck { + lcdck: lcdck { + #clock-cells = <0>; + reg = <3>; + clocks = <&mck>; + }; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/sama5d3_mci2.dtsi b/arch/arm/boot/dts/sama5d3_mci2.dtsi index 38e88e39e55..b029fe7ef17 100644 --- a/arch/arm/boot/dts/sama5d3_mci2.dtsi +++ b/arch/arm/boot/dts/sama5d3_mci2.dtsi @@ -9,6 +9,7 @@ #include <dt-bindings/pinctrl/at91.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/clk/at91.h> / { ahb { @@ -30,6 +31,15 @@ }; }; + pmc: pmc@fffffc00 { + periphck { + mci2_clk: mci2_clk { + #clock-cells = <0>; + reg = <23>; + }; + }; + }; + mmc2: mmc@f8004000 { compatible = "atmel,hsmci"; reg = <0xf8004000 0x600>; @@ -38,6 +48,8 @@ dma-names = "rxtx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mmc2_clk_cmd_dat0 &pinctrl_mmc2_dat1_3>; + clocks = <&mci2_clk>; + clock-names = "mci_clk"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/sama5d3_tcb1.dtsi b/arch/arm/boot/dts/sama5d3_tcb1.dtsi index 5264bb4a699..382b04431f6 100644 --- a/arch/arm/boot/dts/sama5d3_tcb1.dtsi +++ b/arch/arm/boot/dts/sama5d3_tcb1.dtsi @@ -9,6 +9,7 @@ #include <dt-bindings/pinctrl/at91.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/clk/at91.h> / { aliases { @@ -17,10 +18,21 @@ ahb { apb { + pmc: pmc@fffffc00 { + periphck { + tcb1_clk: tcb1_clk { + #clock-cells = <0>; + reg = <27>; + }; + }; + }; + tcb1: timer@f8014000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf8014000 0x100>; interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&tcb1_clk>; + clock-names = "t0_clk"; }; }; }; diff --git a/arch/arm/boot/dts/sama5d3_uart.dtsi b/arch/arm/boot/dts/sama5d3_uart.dtsi index 98fcb2d5744..a9fa75e4165 100644 --- a/arch/arm/boot/dts/sama5d3_uart.dtsi +++ b/arch/arm/boot/dts/sama5d3_uart.dtsi @@ -9,8 +9,14 @@ #include <dt-bindings/pinctrl/at91.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/clk/at91.h> / { + aliases { + serial5 = &uart0; + serial6 = &uart1; + }; + ahb { apb { pinctrl@fffff200 { @@ -31,12 +37,30 @@ }; }; + pmc: pmc@fffffc00 { + periphck { + uart0_clk: uart0_clk { + #clock-cells = <0>; + reg = <16>; + atmel,clk-output-range = <0 66000000>; + }; + + uart1_clk: uart1_clk { + #clock-cells = <0>; + reg = <17>; + atmel,clk-output-range = <0 66000000>; + }; + }; + }; + uart0: serial@f0024000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf0024000 0x200>; interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; + clocks = <&uart0_clk>; + clock-names = "usart"; status = "disabled"; }; @@ -46,6 +70,8 @@ interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; + clocks = <&uart1_clk>; + clock-names = "usart"; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/sama5d3xcm.dtsi index 726a0f35100..f55ed072c8e 100644 --- a/arch/arm/boot/dts/sama5d3xcm.dtsi +++ b/arch/arm/boot/dts/sama5d3xcm.dtsi @@ -18,17 +18,6 @@ reg = <0x20000000 0x20000000>; }; - clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock@0 { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <12000000>; - }; - }; - ahb { apb { spi0: spi@f0004000 { @@ -38,6 +27,12 @@ macb0: ethernet@f0028000 { phy-mode = "rgmii"; }; + + pmc: pmc@fffffc00 { + main: mainck { + clock-frequency = <12000000>; + }; + }; }; nand0: nand@60000000 { diff --git a/arch/arm/boot/dts/sama5d3xdm.dtsi b/arch/arm/boot/dts/sama5d3xdm.dtsi index 1c296d6b2f2..f9bdde542ce 100644 --- a/arch/arm/boot/dts/sama5d3xdm.dtsi +++ b/arch/arm/boot/dts/sama5d3xdm.dtsi @@ -18,6 +18,7 @@ interrupts = <31 0x0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_qt1070_irq>; + wakeup-source; }; }; diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig index 4934295bb4f..da753e31c85 100644 --- a/arch/arm/configs/tegra_defconfig +++ b/arch/arm/configs/tegra_defconfig @@ -33,6 +33,7 @@ CONFIG_PCI=y CONFIG_PCI_MSI=y CONFIG_PCI_TEGRA=y CONFIG_PCIEPORTBUS=y +CONFIG_TRUSTED_FOUNDATIONS=y CONFIG_SMP=y CONFIG_PREEMPT=y CONFIG_AEABI=y diff --git a/arch/arm/firmware/Kconfig b/arch/arm/firmware/Kconfig new file mode 100644 index 00000000000..bb00ccf00d6 --- /dev/null +++ b/arch/arm/firmware/Kconfig @@ -0,0 +1,28 @@ +config ARCH_SUPPORTS_FIRMWARE + bool + +config ARCH_SUPPORTS_TRUSTED_FOUNDATIONS + bool + select ARCH_SUPPORTS_FIRMWARE + +menu "Firmware options" + depends on ARCH_SUPPORTS_FIRMWARE + +config TRUSTED_FOUNDATIONS + bool "Trusted Foundations secure monitor support" + depends on ARCH_SUPPORTS_TRUSTED_FOUNDATIONS + help + Some devices (including most Tegra-based consumer devices on the + market) are booted with the Trusted Foundations secure monitor + active, requiring some core operations to be performed by the secure + monitor instead of the kernel. + + This option allows the kernel to invoke the secure monitor whenever + required on devices using Trusted Foundations. See + arch/arm/include/asm/trusted_foundations.h or the + tl,trusted-foundations device tree binding documentation for details + on how to use it. + + Say n if you don't know what this is about. + +endmenu diff --git a/arch/arm/firmware/Makefile b/arch/arm/firmware/Makefile new file mode 100644 index 00000000000..a71f16536b6 --- /dev/null +++ b/arch/arm/firmware/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_TRUSTED_FOUNDATIONS) += trusted_foundations.o diff --git a/arch/arm/firmware/trusted_foundations.c b/arch/arm/firmware/trusted_foundations.c new file mode 100644 index 00000000000..ef1e3d8f4af --- /dev/null +++ b/arch/arm/firmware/trusted_foundations.c @@ -0,0 +1,81 @@ +/* + * Trusted Foundations support for ARM CPUs + * + * Copyright (c) 2013, NVIDIA Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/of.h> +#include <asm/firmware.h> +#include <asm/trusted_foundations.h> + +#define TF_SET_CPU_BOOT_ADDR_SMC 0xfffff200 + +static void __naked tf_generic_smc(u32 type, u32 arg1, u32 arg2) +{ + asm volatile( + ".arch_extension sec\n\t" + "stmfd sp!, {r4 - r11, lr}\n\t" + __asmeq("%0", "r0") + __asmeq("%1", "r1") + __asmeq("%2", "r2") + "mov r3, #0\n\t" + "mov r4, #0\n\t" + "smc #0\n\t" + "ldmfd sp!, {r4 - r11, pc}" + : + : "r" (type), "r" (arg1), "r" (arg2) + : "memory"); +} + +static int tf_set_cpu_boot_addr(int cpu, unsigned long boot_addr) +{ + tf_generic_smc(TF_SET_CPU_BOOT_ADDR_SMC, boot_addr, 0); + + return 0; +} + +static const struct firmware_ops trusted_foundations_ops = { + .set_cpu_boot_addr = tf_set_cpu_boot_addr, +}; + +void register_trusted_foundations(struct trusted_foundations_platform_data *pd) +{ + /* + * we are not using version information for now since currently + * supported SMCs are compatible with all TF releases + */ + register_firmware_ops(&trusted_foundations_ops); +} + +void of_register_trusted_foundations(void) +{ + struct device_node *node; + struct trusted_foundations_platform_data pdata; + int err; + + node = of_find_compatible_node(NULL, NULL, "tlm,trusted-foundations"); + if (!node) + return; + + err = of_property_read_u32(node, "tlm,version-major", + &pdata.version_major); + if (err != 0) + panic("Trusted Foundation: missing version-major property\n"); + err = of_property_read_u32(node, "tlm,version-minor", + &pdata.version_minor); + if (err != 0) + panic("Trusted Foundation: missing version-minor property\n"); + register_trusted_foundations(&pdata); +} diff --git a/arch/arm/include/asm/trusted_foundations.h b/arch/arm/include/asm/trusted_foundations.h new file mode 100644 index 00000000000..3bd36e2c5f2 --- /dev/null +++ b/arch/arm/include/asm/trusted_foundations.h @@ -0,0 +1,67 @@ +/* + * Copyright (c) 2013, NVIDIA Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +/* + * Support for the Trusted Foundations secure monitor. + * + * Trusted Foundation comes active on some ARM consumer devices (most + * Tegra-based devices sold on the market are concerned). Such devices can only + * perform some basic operations, like setting the CPU reset vector, through + * SMC calls to the secure monitor. The calls are completely specific to + * Trusted Foundations, and do *not* follow the SMC calling convention or the + * PSCI standard. + */ + +#ifndef __ASM_ARM_TRUSTED_FOUNDATIONS_H +#define __ASM_ARM_TRUSTED_FOUNDATIONS_H + +#include <linux/kconfig.h> +#include <linux/printk.h> +#include <linux/bug.h> +#include <linux/of.h> + +struct trusted_foundations_platform_data { + unsigned int version_major; + unsigned int version_minor; +}; + +#if IS_ENABLED(CONFIG_TRUSTED_FOUNDATIONS) + +void register_trusted_foundations(struct trusted_foundations_platform_data *pd); +void of_register_trusted_foundations(void); + +#else /* CONFIG_TRUSTED_FOUNDATIONS */ + +static inline void register_trusted_foundations( + struct trusted_foundations_platform_data *pd) +{ + /* + * If we try to register TF, this means the system needs it to continue. + * Its absence if thus a fatal error. + */ + panic("No support for Trusted Foundations, stopping...\n"); +} + +static inline void of_register_trusted_foundations(void) +{ + /* + * If we find the target should enable TF but does not support it, + * fail as the system won't be able to do much anyway + */ + if (of_find_compatible_node(NULL, NULL, "tl,trusted-foundations")) + register_trusted_foundations(NULL); +} +#endif /* CONFIG_TRUSTED_FOUNDATIONS */ + +#endif diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 699b71e7f7e..b4f7d6ffa30 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -1,15 +1,33 @@ if ARCH_AT91 +config HAVE_AT91_UTMI + bool + +config HAVE_AT91_USB_CLK + bool + config HAVE_AT91_DBGU0 bool config HAVE_AT91_DBGU1 bool +config AT91_USE_OLD_CLK + bool + config AT91_PMC_UNIT bool default !ARCH_AT91X40 +config COMMON_CLK_AT91 + bool + default AT91_PMC_UNIT && USE_OF && !AT91_USE_OLD_CLK + select COMMON_CLK + +config OLD_CLK_AT91 + bool + default AT91_PMC_UNIT && AT91_USE_OLD_CLK + config AT91_SAM9_ALT_RESET bool default !ARCH_AT91X40 @@ -21,6 +39,9 @@ config AT91_SAM9G45_RESET config AT91_SAM9_TIME bool +config HAVE_AT91_SMD + bool + config SOC_AT91SAM9 bool select AT91_SAM9_TIME @@ -65,6 +86,9 @@ config SOC_SAMA5D3 select SOC_SAMA5 select HAVE_FB_ATMEL select HAVE_AT91_DBGU1 + select HAVE_AT91_UTMI + select HAVE_AT91_SMD + select HAVE_AT91_USB_CLK help Select this if you are using one of Atmel's SAMA5D3 family SoC. This support covers SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35. @@ -78,11 +102,15 @@ config SOC_AT91RM9200 select HAVE_AT91_DBGU0 select MULTI_IRQ_HANDLER select SPARSE_IRQ + select AT91_USE_OLD_CLK + select HAVE_AT91_USB_CLK config SOC_AT91SAM9260 bool "AT91SAM9260, AT91SAM9XE or AT91SAM9G20" select HAVE_AT91_DBGU0 select SOC_AT91SAM9 + select AT91_USE_OLD_CLK + select HAVE_AT91_USB_CLK help Select this if you are using one of Atmel's AT91SAM9260, AT91SAM9XE or AT91SAM9G20 SoC. @@ -92,6 +120,8 @@ config SOC_AT91SAM9261 select HAVE_AT91_DBGU0 select HAVE_FB_ATMEL select SOC_AT91SAM9 + select AT91_USE_OLD_CLK + select HAVE_AT91_USB_CLK help Select this if you are using one of Atmel's AT91SAM9261 or AT91SAM9G10 SoC. @@ -100,18 +130,25 @@ config SOC_AT91SAM9263 select HAVE_AT91_DBGU1 select HAVE_FB_ATMEL select SOC_AT91SAM9 + select AT91_USE_OLD_CLK + select HAVE_AT91_USB_CLK config SOC_AT91SAM9RL bool "AT91SAM9RL" select HAVE_AT91_DBGU0 select HAVE_FB_ATMEL select SOC_AT91SAM9 + select AT91_USE_OLD_CLK + select HAVE_AT91_UTMI config SOC_AT91SAM9G45 bool "AT91SAM9G45 or AT91SAM9M10 families" select HAVE_AT91_DBGU1 select HAVE_FB_ATMEL select SOC_AT91SAM9 + select AT91_USE_OLD_CLK + select HAVE_AT91_UTMI + select HAVE_AT91_USB_CLK help Select this if you are using one of Atmel's AT91SAM9G45 family SoC. This support covers AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11. @@ -121,6 +158,10 @@ config SOC_AT91SAM9X5 select HAVE_AT91_DBGU0 select HAVE_FB_ATMEL select SOC_AT91SAM9 + select AT91_USE_OLD_CLK + select HAVE_AT91_UTMI + select HAVE_AT91_SMD + select HAVE_AT91_USB_CLK help Select this if you are using one of Atmel's AT91SAM9x5 family SoC. This means that your SAM9 name finishes with a '5' (except if it is @@ -133,6 +174,8 @@ config SOC_AT91SAM9N12 select HAVE_AT91_DBGU0 select HAVE_FB_ATMEL select SOC_AT91SAM9 + select AT91_USE_OLD_CLK + select HAVE_AT91_USB_CLK help Select this if you are using Atmel's AT91SAM9N12 SoC. diff --git a/arch/arm/mach-at91/Kconfig.non_dt b/arch/arm/mach-at91/Kconfig.non_dt index ca900be144c..b736b571e88 100644 --- a/arch/arm/mach-at91/Kconfig.non_dt +++ b/arch/arm/mach-at91/Kconfig.non_dt @@ -12,26 +12,32 @@ config ARCH_AT91_NONE config ARCH_AT91RM9200 bool "AT91RM9200" select SOC_AT91RM9200 + select AT91_USE_OLD_CLK config ARCH_AT91SAM9260 bool "AT91SAM9260 or AT91SAM9XE or AT91SAM9G20" select SOC_AT91SAM9260 + select AT91_USE_OLD_CLK config ARCH_AT91SAM9261 bool "AT91SAM9261 or AT91SAM9G10" select SOC_AT91SAM9261 + select AT91_USE_OLD_CLK config ARCH_AT91SAM9263 bool "AT91SAM9263" select SOC_AT91SAM9263 + select AT91_USE_OLD_CLK config ARCH_AT91SAM9RL bool "AT91SAM9RL" select SOC_AT91SAM9RL + select AT91_USE_OLD_CLK config ARCH_AT91SAM9G45 bool "AT91SAM9G45" select SOC_AT91SAM9G45 + select AT91_USE_OLD_CLK config ARCH_AT91X40 bool "AT91x40" diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index 90aab2d5a07..705b38a179e 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -7,7 +7,7 @@ obj-m := obj-n := obj- := -obj-$(CONFIG_AT91_PMC_UNIT) += clock.o +obj-$(CONFIG_OLD_CLK_AT91) += clock.o obj-$(CONFIG_AT91_SAM9_ALT_RESET) += at91sam9_alt_reset.o obj-$(CONFIG_AT91_SAM9G45_RESET) += at91sam9g45_reset.o obj-$(CONFIG_AT91_SAM9_TIME) += at91sam926x_time.o diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index 25805f2f601..e47f5fd232f 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -12,13 +12,13 @@ #include <linux/module.h> #include <linux/reboot.h> +#include <linux/clk/at91_pmc.h> #include <asm/irq.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/system_misc.h> #include <mach/at91rm9200.h> -#include <mach/at91_pmc.h> #include <mach/at91_st.h> #include <mach/cpu.h> diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index d6a1fa85371..6c821e56215 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -11,6 +11,7 @@ */ #include <linux/module.h> +#include <linux/clk/at91_pmc.h> #include <asm/proc-fns.h> #include <asm/irq.h> @@ -20,7 +21,6 @@ #include <mach/cpu.h> #include <mach/at91_dbgu.h> #include <mach/at91sam9260.h> -#include <mach/at91_pmc.h> #include "at91_aic.h" #include "at91_rstc.h" diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index 23ba1d8a153..6276b4c1acf 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -11,6 +11,7 @@ */ #include <linux/module.h> +#include <linux/clk/at91_pmc.h> #include <asm/proc-fns.h> #include <asm/irq.h> @@ -19,7 +20,6 @@ #include <asm/system_misc.h> #include <mach/cpu.h> #include <mach/at91sam9261.h> -#include <mach/at91_pmc.h> #include "at91_aic.h" #include "at91_rstc.h" diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index 7eccb0fc57b..37b90f4b990 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -11,6 +11,7 @@ */ #include <linux/module.h> +#include <linux/clk/at91_pmc.h> #include <asm/proc-fns.h> #include <asm/irq.h> @@ -18,7 +19,6 @@ #include <asm/mach/map.h> #include <asm/system_misc.h> #include <mach/at91sam9263.h> -#include <mach/at91_pmc.h> #include "at91_aic.h" #include "at91_rstc.h" diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c index bb392320a0d..0f04ffe9c5a 100644 --- a/arch/arm/mach-at91/at91sam926x_time.c +++ b/arch/arm/mach-at91/at91sam926x_time.c @@ -39,6 +39,7 @@ static u32 pit_cycle; /* write-once */ static u32 pit_cnt; /* access only w/system irq blocked */ static void __iomem *pit_base_addr __read_mostly; +static struct clk *mck; static inline unsigned int pit_read(unsigned int reg_offset) { @@ -195,10 +196,14 @@ static int __init of_at91sam926x_pit_init(void) if (!pit_base_addr) goto node_err; + mck = of_clk_get(np, 0); + /* Get the interrupts property */ ret = irq_of_parse_and_map(np, 0); if (!ret) { pr_crit("AT91: PIT: Unable to get IRQ from DT\n"); + if (!IS_ERR(mck)) + clk_put(mck); goto ioremap_err; } at91sam926x_pit_irq.irq = ret; @@ -230,6 +235,8 @@ void __init at91sam926x_pit_init(void) unsigned bits; int ret; + mck = ERR_PTR(-ENOENT); + /* For device tree enabled device: initialize here */ of_at91sam926x_pit_init(); @@ -237,7 +244,12 @@ void __init at91sam926x_pit_init(void) * Use our actual MCK to figure out how many MCK/16 ticks per * 1/HZ period (instead of a compile-time constant LATCH). */ - pit_rate = clk_get_rate(clk_get(NULL, "mck")) / 16; + if (IS_ERR(mck)) + mck = clk_get(NULL, "mck"); + + if (IS_ERR(mck)) + panic("AT91: PIT: Unable to get mck clk\n"); + pit_rate = clk_get_rate(mck) / 16; pit_cycle = (pit_rate + HZ/2) / HZ; WARN_ON(((pit_cycle - 1) & ~AT91_PIT_PIV) != 0); diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index 9405aa08b10..2f455ce3526 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -12,13 +12,13 @@ #include <linux/module.h> #include <linux/dma-mapping.h> +#include <linux/clk/at91_pmc.h> #include <asm/irq.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/system_misc.h> #include <mach/at91sam9g45.h> -#include <mach/at91_pmc.h> #include <mach/cpu.h> #include "at91_aic.h" diff --git a/arch/arm/mach-at91/at91sam9n12.c b/arch/arm/mach-at91/at91sam9n12.c index 388ec3aec4b..4ef088c62ea 100644 --- a/arch/arm/mach-at91/at91sam9n12.c +++ b/arch/arm/mach-at91/at91sam9n12.c @@ -8,12 +8,12 @@ #include <linux/module.h> #include <linux/dma-mapping.h> +#include <linux/clk/at91_pmc.h> #include <asm/irq.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <mach/at91sam9n12.h> -#include <mach/at91_pmc.h> #include <mach/cpu.h> #include "board.h" diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c index 0750ffb7e6b..3651517abed 100644 --- a/arch/arm/mach-at91/at91sam9rl.c +++ b/arch/arm/mach-at91/at91sam9rl.c @@ -10,6 +10,7 @@ */ #include <linux/module.h> +#include <linux/clk/at91_pmc.h> #include <asm/proc-fns.h> #include <asm/irq.h> @@ -19,7 +20,6 @@ #include <mach/cpu.h> #include <mach/at91_dbgu.h> #include <mach/at91sam9rl.h> -#include <mach/at91_pmc.h> #include "at91_aic.h" #include "at91_rstc.h" diff --git a/arch/arm/mach-at91/at91sam9x5.c b/arch/arm/mach-at91/at91sam9x5.c index e8a2e075a1b..3e8ec26e39d 100644 --- a/arch/arm/mach-at91/at91sam9x5.c +++ b/arch/arm/mach-at91/at91sam9x5.c @@ -8,12 +8,12 @@ #include <linux/module.h> #include <linux/dma-mapping.h> +#include <linux/clk/at91_pmc.h> #include <asm/irq.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <mach/at91sam9x5.h> -#include <mach/at91_pmc.h> #include <mach/cpu.h> #include "board.h" diff --git a/arch/arm/mach-at91/board-dt-sama5.c b/arch/arm/mach-at91/board-dt-sama5.c index bf00d15d954..075ec0576ad 100644 --- a/arch/arm/mach-at91/board-dt-sama5.c +++ b/arch/arm/mach-at91/board-dt-sama5.c @@ -16,6 +16,7 @@ #include <linux/of_irq.h> #include <linux/of_platform.h> #include <linux/phy.h> +#include <linux/clk-provider.h> #include <asm/setup.h> #include <asm/irq.h> @@ -26,6 +27,13 @@ #include "at91_aic.h" #include "generic.h" +static void __init sama5_dt_timer_init(void) +{ +#if defined(CONFIG_COMMON_CLK) + of_clk_init(NULL); +#endif + at91sam926x_pit_init(); +} static const struct of_device_id irq_of_match[] __initconst = { @@ -72,7 +80,7 @@ static const char *sama5_dt_board_compat[] __initdata = { DT_MACHINE_START(sama5_dt, "Atmel SAMA5 (Device Tree)") /* Maintainer: Atmel */ - .init_time = at91sam926x_pit_init, + .init_time = sama5_dt_timer_init, .map_io = at91_map_io, .handle_irq = at91_aic5_handle_irq, .init_early = at91_dt_initialize, diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c index 6b2630a92f7..72b25794473 100644 --- a/arch/arm/mach-at91/clock.c +++ b/arch/arm/mach-at91/clock.c @@ -24,9 +24,9 @@ #include <linux/clk.h> #include <linux/io.h> #include <linux/of_address.h> +#include <linux/clk/at91_pmc.h> #include <mach/hardware.h> -#include <mach/at91_pmc.h> #include <mach/cpu.h> #include <asm/proc-fns.h> @@ -884,6 +884,11 @@ static int __init at91_pmc_init(unsigned long main_clock) #if defined(CONFIG_OF) static struct of_device_id pmc_ids[] = { { .compatible = "atmel,at91rm9200-pmc" }, + { .compatible = "atmel,at91sam9260-pmc" }, + { .compatible = "atmel,at91sam9g45-pmc" }, + { .compatible = "atmel,at91sam9n12-pmc" }, + { .compatible = "atmel,at91sam9x5-pmc" }, + { .compatible = "atmel,sama5d3-pmc" }, { /*sentinel*/ } }; diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index 26dee3ce939..631fa3b8c16 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -46,11 +46,12 @@ extern void at91sam926x_pit_init(void); extern void at91x40_timer_init(void); /* Clocks */ -#ifdef CONFIG_AT91_PMC_UNIT +#ifdef CONFIG_OLD_CLK_AT91 extern int __init at91_clock_init(unsigned long main_clock); extern int __init at91_dt_clock_init(void); #else static int inline at91_clock_init(unsigned long main_clock) { return 0; } +static int inline at91_dt_clock_init(void) { return 0; } #endif struct device; diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h deleted file mode 100644 index c604cc69acb..00000000000 --- a/arch/arm/mach-at91/include/mach/at91_pmc.h +++ /dev/null @@ -1,190 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91_pmc.h - * - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) SAN People - * - * Power Management Controller (PMC) - System peripherals registers. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_PMC_H -#define AT91_PMC_H - -#ifndef __ASSEMBLY__ -extern void __iomem *at91_pmc_base; - -#define at91_pmc_read(field) \ - __raw_readl(at91_pmc_base + field) - -#define at91_pmc_write(field, value) \ - __raw_writel(value, at91_pmc_base + field) -#else -.extern at91_pmc_base -#endif - -#define AT91_PMC_SCER 0x00 /* System Clock Enable Register */ -#define AT91_PMC_SCDR 0x04 /* System Clock Disable Register */ - -#define AT91_PMC_SCSR 0x08 /* System Clock Status Register */ -#define AT91_PMC_PCK (1 << 0) /* Processor Clock */ -#define AT91RM9200_PMC_UDP (1 << 1) /* USB Devcice Port Clock [AT91RM9200 only] */ -#define AT91RM9200_PMC_MCKUDP (1 << 2) /* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */ -#define AT91RM9200_PMC_UHP (1 << 4) /* USB Host Port Clock [AT91RM9200 only] */ -#define AT91SAM926x_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91SAM926x only] */ -#define AT91SAM926x_PMC_UDP (1 << 7) /* USB Devcice Port Clock [AT91SAM926x only] */ -#define AT91_PMC_PCK0 (1 << 8) /* Programmable Clock 0 */ -#define AT91_PMC_PCK1 (1 << 9) /* Programmable Clock 1 */ -#define AT91_PMC_PCK2 (1 << 10) /* Programmable Clock 2 */ -#define AT91_PMC_PCK3 (1 << 11) /* Programmable Clock 3 */ -#define AT91_PMC_PCK4 (1 << 12) /* Programmable Clock 4 [AT572D940HF only] */ -#define AT91_PMC_HCK0 (1 << 16) /* AHB Clock (USB host) [AT91SAM9261 only] */ -#define AT91_PMC_HCK1 (1 << 17) /* AHB Clock (LCD) [AT91SAM9261 only] */ - -#define AT91_PMC_PCER 0x10 /* Peripheral Clock Enable Register */ -#define AT91_PMC_PCDR 0x14 /* Peripheral Clock Disable Register */ -#define AT91_PMC_PCSR 0x18 /* Peripheral Clock Status Register */ - -#define AT91_CKGR_UCKR 0x1C /* UTMI Clock Register [some SAM9] */ -#define AT91_PMC_UPLLEN (1 << 16) /* UTMI PLL Enable */ -#define AT91_PMC_UPLLCOUNT (0xf << 20) /* UTMI PLL Start-up Time */ -#define AT91_PMC_BIASEN (1 << 24) /* UTMI BIAS Enable */ -#define AT91_PMC_BIASCOUNT (0xf << 28) /* UTMI BIAS Start-up Time */ - -#define AT91_CKGR_MOR 0x20 /* Main Oscillator Register [not on SAM9RL] */ -#define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */ -#define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass */ -#define AT91_PMC_MOSCRCEN (1 << 3) /* Main On-Chip RC Oscillator Enable [some SAM9] */ -#define AT91_PMC_OSCOUNT (0xff << 8) /* Main Oscillator Start-up Time */ -#define AT91_PMC_KEY (0x37 << 16) /* MOR Writing Key */ -#define AT91_PMC_MOSCSEL (1 << 24) /* Main Oscillator Selection [some SAM9] */ -#define AT91_PMC_CFDEN (1 << 25) /* Clock Failure Detector Enable [some SAM9] */ - -#define AT91_CKGR_MCFR 0x24 /* Main Clock Frequency Register */ -#define AT91_PMC_MAINF (0xffff << 0) /* Main Clock Frequency */ -#define AT91_PMC_MAINRDY (1 << 16) /* Main Clock Ready */ - -#define AT91_CKGR_PLLAR 0x28 /* PLL A Register */ -#define AT91_CKGR_PLLBR 0x2c /* PLL B Register */ -#define AT91_PMC_DIV (0xff << 0) /* Divider */ -#define AT91_PMC_PLLCOUNT (0x3f << 8) /* PLL Counter */ -#define AT91_PMC_OUT (3 << 14) /* PLL Clock Frequency Range */ -#define AT91_PMC_MUL (0x7ff << 16) /* PLL Multiplier */ -#define AT91_PMC_MUL_GET(n) ((n) >> 16 & 0x7ff) -#define AT91_PMC3_MUL (0x7f << 18) /* PLL Multiplier [SAMA5 only] */ -#define AT91_PMC3_MUL_GET(n) ((n) >> 18 & 0x7f) -#define AT91_PMC_USBDIV (3 << 28) /* USB Divisor (PLLB only) */ -#define AT91_PMC_USBDIV_1 (0 << 28) -#define AT91_PMC_USBDIV_2 (1 << 28) -#define AT91_PMC_USBDIV_4 (2 << 28) -#define AT91_PMC_USB96M (1 << 28) /* Divider by 2 Enable (PLLB only) */ - -#define AT91_PMC_MCKR 0x30 /* Master Clock Register */ -#define AT91_PMC_CSS (3 << 0) /* Master Clock Selection */ -#define AT91_PMC_CSS_SLOW (0 << 0) -#define AT91_PMC_CSS_MAIN (1 << 0) -#define AT91_PMC_CSS_PLLA (2 << 0) -#define AT91_PMC_CSS_PLLB (3 << 0) -#define AT91_PMC_CSS_UPLL (3 << 0) /* [some SAM9 only] */ -#define PMC_PRES_OFFSET 2 -#define AT91_PMC_PRES (7 << PMC_PRES_OFFSET) /* Master Clock Prescaler */ -#define AT91_PMC_PRES_1 (0 << PMC_PRES_OFFSET) -#define AT91_PMC_PRES_2 (1 << PMC_PRES_OFFSET) -#define AT91_PMC_PRES_4 (2 << PMC_PRES_OFFSET) -#define AT91_PMC_PRES_8 (3 << PMC_PRES_OFFSET) -#define AT91_PMC_PRES_16 (4 << PMC_PRES_OFFSET) -#define AT91_PMC_PRES_32 (5 << PMC_PRES_OFFSET) -#define AT91_PMC_PRES_64 (6 << PMC_PRES_OFFSET) -#define PMC_ALT_PRES_OFFSET 4 -#define AT91_PMC_ALT_PRES (7 << PMC_ALT_PRES_OFFSET) /* Master Clock Prescaler [alternate location] */ -#define AT91_PMC_ALT_PRES_1 (0 << PMC_ALT_PRES_OFFSET) -#define AT91_PMC_ALT_PRES_2 (1 << PMC_ALT_PRES_OFFSET) -#define AT91_PMC_ALT_PRES_4 (2 << PMC_ALT_PRES_OFFSET) -#define AT91_PMC_ALT_PRES_8 (3 << PMC_ALT_PRES_OFFSET) -#define AT91_PMC_ALT_PRES_16 (4 << PMC_ALT_PRES_OFFSET) -#define AT91_PMC_ALT_PRES_32 (5 << PMC_ALT_PRES_OFFSET) -#define AT91_PMC_ALT_PRES_64 (6 << PMC_ALT_PRES_OFFSET) -#define AT91_PMC_MDIV (3 << 8) /* Master Clock Division */ -#define AT91RM9200_PMC_MDIV_1 (0 << 8) /* [AT91RM9200 only] */ -#define AT91RM9200_PMC_MDIV_2 (1 << 8) -#define AT91RM9200_PMC_MDIV_3 (2 << 8) -#define AT91RM9200_PMC_MDIV_4 (3 << 8) -#define AT91SAM9_PMC_MDIV_1 (0 << 8) /* [SAM9 only] */ -#define AT91SAM9_PMC_MDIV_2 (1 << 8) -#define AT91SAM9_PMC_MDIV_4 (2 << 8) -#define AT91SAM9_PMC_MDIV_6 (3 << 8) /* [some SAM9 only] */ -#define AT91SAM9_PMC_MDIV_3 (3 << 8) /* [some SAM9 only] */ -#define AT91_PMC_PDIV (1 << 12) /* Processor Clock Division [some SAM9 only] */ -#define AT91_PMC_PDIV_1 (0 << 12) -#define AT91_PMC_PDIV_2 (1 << 12) -#define AT91_PMC_PLLADIV2 (1 << 12) /* PLLA divisor by 2 [some SAM9 only] */ -#define AT91_PMC_PLLADIV2_OFF (0 << 12) -#define AT91_PMC_PLLADIV2_ON (1 << 12) - -#define AT91_PMC_USB 0x38 /* USB Clock Register [some SAM9 only] */ -#define AT91_PMC_USBS (0x1 << 0) /* USB OHCI Input clock selection */ -#define AT91_PMC_USBS_PLLA (0 << 0) -#define AT91_PMC_USBS_UPLL (1 << 0) -#define AT91_PMC_USBS_PLLB (1 << 0) /* [AT91SAMN12 only] */ -#define AT91_PMC_OHCIUSBDIV (0xF << 8) /* Divider for USB OHCI Clock */ -#define AT91_PMC_OHCIUSBDIV_1 (0x0 << 8) -#define AT91_PMC_OHCIUSBDIV_2 (0x1 << 8) - -#define AT91_PMC_SMD 0x3c /* Soft Modem Clock Register [some SAM9 only] */ -#define AT91_PMC_SMDS (0x1 << 0) /* SMD input clock selection */ -#define AT91_PMC_SMD_DIV (0x1f << 8) /* SMD input clock divider */ -#define AT91_PMC_SMDDIV(n) (((n) << 8) & AT91_PMC_SMD_DIV) - -#define AT91_PMC_PCKR(n) (0x40 + ((n) * 4)) /* Programmable Clock 0-N Registers */ -#define AT91_PMC_ALT_PCKR_CSS (0x7 << 0) /* Programmable Clock Source Selection [alternate length] */ -#define AT91_PMC_CSS_MASTER (4 << 0) /* [some SAM9 only] */ -#define AT91_PMC_CSSMCK (0x1 << 8) /* CSS or Master Clock Selection */ -#define AT91_PMC_CSSMCK_CSS (0 << 8) -#define AT91_PMC_CSSMCK_MCK (1 << 8) - -#define AT91_PMC_IER 0x60 /* Interrupt Enable Register */ -#define AT91_PMC_IDR 0x64 /* Interrupt Disable Register */ -#define AT91_PMC_SR 0x68 /* Status Register */ -#define AT91_PMC_MOSCS (1 << 0) /* MOSCS Flag */ -#define AT91_PMC_LOCKA (1 << 1) /* PLLA Lock */ -#define AT91_PMC_LOCKB (1 << 2) /* PLLB Lock */ -#define AT91_PMC_MCKRDY (1 << 3) /* Master Clock */ -#define AT91_PMC_LOCKU (1 << 6) /* UPLL Lock [some SAM9] */ -#define AT91_PMC_PCK0RDY (1 << 8) /* Programmable Clock 0 */ -#define AT91_PMC_PCK1RDY (1 << 9) /* Programmable Clock 1 */ -#define AT91_PMC_PCK2RDY (1 << 10) /* Programmable Clock 2 */ -#define AT91_PMC_PCK3RDY (1 << 11) /* Programmable Clock 3 */ -#define AT91_PMC_MOSCSELS (1 << 16) /* Main Oscillator Selection [some SAM9] */ -#define AT91_PMC_MOSCRCS (1 << 17) /* Main On-Chip RC [some SAM9] */ -#define AT91_PMC_CFDEV (1 << 18) /* Clock Failure Detector Event [some SAM9] */ -#define AT91_PMC_IMR 0x6c /* Interrupt Mask Register */ - -#define AT91_PMC_PROT 0xe4 /* Write Protect Mode Register [some SAM9] */ -#define AT91_PMC_WPEN (0x1 << 0) /* Write Protect Enable */ -#define AT91_PMC_WPKEY (0xffffff << 8) /* Write Protect Key */ -#define AT91_PMC_PROTKEY (0x504d43 << 8) /* Activation Code */ - -#define AT91_PMC_WPSR 0xe8 /* Write Protect Status Register [some SAM9] */ -#define AT91_PMC_WPVS (0x1 << 0) /* Write Protect Violation Status */ -#define AT91_PMC_WPVSRC (0xffff << 8) /* Write Protect Violation Source */ - -#define AT91_PMC_PCER1 0x100 /* Peripheral Clock Enable Register 1 [SAMA5 only]*/ -#define AT91_PMC_PCDR1 0x104 /* Peripheral Clock Enable Register 1 */ -#define AT91_PMC_PCSR1 0x108 /* Peripheral Clock Enable Register 1 */ - -#define AT91_PMC_PCR 0x10c /* Peripheral Control Register [some SAM9 and SAMA5] */ -#define AT91_PMC_PCR_PID (0x3f << 0) /* Peripheral ID */ -#define AT91_PMC_PCR_CMD (0x1 << 12) /* Command (read=0, write=1) */ -#define AT91_PMC_PCR_DIV(n) ((n) << 16) /* Divisor Value */ -#define AT91_PMC_PCR_DIV0 0x0 /* Peripheral clock is MCK */ -#define AT91_PMC_PCR_DIV2 0x1 /* Peripheral clock is MCK/2 */ -#define AT91_PMC_PCR_DIV4 0x2 /* Peripheral clock is MCK/4 */ -#define AT91_PMC_PCR_DIV8 0x3 /* Peripheral clock is MCK/8 */ -#define AT91_PMC_PCR_EN (0x1 << 28) /* Enable */ - -#endif diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 9986542e806..d43b79f56e9 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -19,13 +19,13 @@ #include <linux/module.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/clk/at91_pmc.h> #include <asm/irq.h> #include <linux/atomic.h> #include <asm/mach/time.h> #include <asm/mach/irq.h> -#include <mach/at91_pmc.h> #include <mach/cpu.h> #include "at91_aic.h" diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S index 098c28ddf02..20018779bae 100644 --- a/arch/arm/mach-at91/pm_slowclock.S +++ b/arch/arm/mach-at91/pm_slowclock.S @@ -13,8 +13,8 @@ */ #include <linux/linkage.h> +#include <linux/clk/at91_pmc.h> #include <mach/hardware.h> -#include <mach/at91_pmc.h> #include <mach/at91_ramc.h> diff --git a/arch/arm/mach-at91/sama5d3.c b/arch/arm/mach-at91/sama5d3.c index 3ea86428ee0..3d775d08de0 100644 --- a/arch/arm/mach-at91/sama5d3.c +++ b/arch/arm/mach-at91/sama5d3.c @@ -9,360 +9,19 @@ #include <linux/module.h> #include <linux/dma-mapping.h> +#include <linux/clk/at91_pmc.h> #include <asm/irq.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <mach/sama5d3.h> -#include <mach/at91_pmc.h> #include <mach/cpu.h> #include "soc.h" #include "generic.h" -#include "clock.h" #include "sam9_smc.h" /* -------------------------------------------------------------------- - * Clocks - * -------------------------------------------------------------------- */ - -/* - * The peripheral clocks. - */ - -static struct clk pioA_clk = { - .name = "pioA_clk", - .pid = SAMA5D3_ID_PIOA, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk pioB_clk = { - .name = "pioB_clk", - .pid = SAMA5D3_ID_PIOB, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk pioC_clk = { - .name = "pioC_clk", - .pid = SAMA5D3_ID_PIOC, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk pioD_clk = { - .name = "pioD_clk", - .pid = SAMA5D3_ID_PIOD, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk pioE_clk = { - .name = "pioE_clk", - .pid = SAMA5D3_ID_PIOE, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart0_clk = { - .name = "usart0_clk", - .pid = SAMA5D3_ID_USART0, - .type = CLK_TYPE_PERIPHERAL, - .div = AT91_PMC_PCR_DIV2, -}; -static struct clk usart1_clk = { - .name = "usart1_clk", - .pid = SAMA5D3_ID_USART1, - .type = CLK_TYPE_PERIPHERAL, - .div = AT91_PMC_PCR_DIV2, -}; -static struct clk usart2_clk = { - .name = "usart2_clk", - .pid = SAMA5D3_ID_USART2, - .type = CLK_TYPE_PERIPHERAL, - .div = AT91_PMC_PCR_DIV2, -}; -static struct clk usart3_clk = { - .name = "usart3_clk", - .pid = SAMA5D3_ID_USART3, - .type = CLK_TYPE_PERIPHERAL, - .div = AT91_PMC_PCR_DIV2, -}; -static struct clk uart0_clk = { - .name = "uart0_clk", - .pid = SAMA5D3_ID_UART0, - .type = CLK_TYPE_PERIPHERAL, - .div = AT91_PMC_PCR_DIV2, -}; -static struct clk uart1_clk = { - .name = "uart1_clk", - .pid = SAMA5D3_ID_UART1, - .type = CLK_TYPE_PERIPHERAL, - .div = AT91_PMC_PCR_DIV2, -}; -static struct clk twi0_clk = { - .name = "twi0_clk", - .pid = SAMA5D3_ID_TWI0, - .type = CLK_TYPE_PERIPHERAL, - .div = AT91_PMC_PCR_DIV2, -}; -static struct clk twi1_clk = { - .name = "twi1_clk", - .pid = SAMA5D3_ID_TWI1, - .type = CLK_TYPE_PERIPHERAL, - .div = AT91_PMC_PCR_DIV2, -}; -static struct clk twi2_clk = { - .name = "twi2_clk", - .pid = SAMA5D3_ID_TWI2, - .type = CLK_TYPE_PERIPHERAL, - .div = AT91_PMC_PCR_DIV2, -}; -static struct clk mmc0_clk = { - .name = "mci0_clk", - .pid = SAMA5D3_ID_HSMCI0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk mmc1_clk = { - .name = "mci1_clk", - .pid = SAMA5D3_ID_HSMCI1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk mmc2_clk = { - .name = "mci2_clk", - .pid = SAMA5D3_ID_HSMCI2, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk spi0_clk = { - .name = "spi0_clk", - .pid = SAMA5D3_ID_SPI0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk spi1_clk = { - .name = "spi1_clk", - .pid = SAMA5D3_ID_SPI1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk tcb0_clk = { - .name = "tcb0_clk", - .pid = SAMA5D3_ID_TC0, - .type = CLK_TYPE_PERIPHERAL, - .div = AT91_PMC_PCR_DIV2, -}; -static struct clk tcb1_clk = { - .name = "tcb1_clk", - .pid = SAMA5D3_ID_TC1, - .type = CLK_TYPE_PERIPHERAL, - .div = AT91_PMC_PCR_DIV2, -}; -static struct clk adc_clk = { - .name = "adc_clk", - .pid = SAMA5D3_ID_ADC, - .type = CLK_TYPE_PERIPHERAL, - .div = AT91_PMC_PCR_DIV2, -}; -static struct clk adc_op_clk = { - .name = "adc_op_clk", - .type = CLK_TYPE_PERIPHERAL, - .rate_hz = 5000000, -}; -static struct clk dma0_clk = { - .name = "dma0_clk", - .pid = SAMA5D3_ID_DMA0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk dma1_clk = { - .name = "dma1_clk", - .pid = SAMA5D3_ID_DMA1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk uhphs_clk = { - .name = "uhphs", - .pid = SAMA5D3_ID_UHPHS, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk udphs_clk = { - .name = "udphs_clk", - .pid = SAMA5D3_ID_UDPHS, - .type = CLK_TYPE_PERIPHERAL, -}; -/* gmac only for sama5d33, sama5d34, sama5d35 */ -static struct clk macb0_clk = { - .name = "macb0_clk", - .pid = SAMA5D3_ID_GMAC, - .type = CLK_TYPE_PERIPHERAL, -}; -/* emac only for sama5d31, sama5d35 */ -static struct clk macb1_clk = { - .name = "macb1_clk", - .pid = SAMA5D3_ID_EMAC, - .type = CLK_TYPE_PERIPHERAL, -}; -/* lcd only for sama5d31, sama5d33, sama5d34 */ -static struct clk lcdc_clk = { - .name = "lcdc_clk", - .pid = SAMA5D3_ID_LCDC, - .type = CLK_TYPE_PERIPHERAL, -}; -/* isi only for sama5d33, sama5d35 */ -static struct clk isi_clk = { - .name = "isi_clk", - .pid = SAMA5D3_ID_ISI, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk can0_clk = { - .name = "can0_clk", - .pid = SAMA5D3_ID_CAN0, - .type = CLK_TYPE_PERIPHERAL, - .div = AT91_PMC_PCR_DIV2, -}; -static struct clk can1_clk = { - .name = "can1_clk", - .pid = SAMA5D3_ID_CAN1, - .type = CLK_TYPE_PERIPHERAL, - .div = AT91_PMC_PCR_DIV2, -}; -static struct clk ssc0_clk = { - .name = "ssc0_clk", - .pid = SAMA5D3_ID_SSC0, - .type = CLK_TYPE_PERIPHERAL, - .div = AT91_PMC_PCR_DIV2, -}; -static struct clk ssc1_clk = { - .name = "ssc1_clk", - .pid = SAMA5D3_ID_SSC1, - .type = CLK_TYPE_PERIPHERAL, - .div = AT91_PMC_PCR_DIV2, -}; -static struct clk sha_clk = { - .name = "sha_clk", - .pid = SAMA5D3_ID_SHA, - .type = CLK_TYPE_PERIPHERAL, - .div = AT91_PMC_PCR_DIV8, -}; -static struct clk aes_clk = { - .name = "aes_clk", - .pid = SAMA5D3_ID_AES, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk tdes_clk = { - .name = "tdes_clk", - .pid = SAMA5D3_ID_TDES, - .type = CLK_TYPE_PERIPHERAL, -}; - -static struct clk *periph_clocks[] __initdata = { - &pioA_clk, - &pioB_clk, - &pioC_clk, - &pioD_clk, - &pioE_clk, - &usart0_clk, - &usart1_clk, - &usart2_clk, - &usart3_clk, - &uart0_clk, - &uart1_clk, - &twi0_clk, - &twi1_clk, - &twi2_clk, - &mmc0_clk, - &mmc1_clk, - &mmc2_clk, - &spi0_clk, - &spi1_clk, - &tcb0_clk, - &tcb1_clk, - &adc_clk, - &adc_op_clk, - &dma0_clk, - &dma1_clk, - &uhphs_clk, - &udphs_clk, - &macb0_clk, - &macb1_clk, - &lcdc_clk, - &isi_clk, - &can0_clk, - &can1_clk, - &ssc0_clk, - &ssc1_clk, - &sha_clk, - &aes_clk, - &tdes_clk, -}; - -static struct clk pck0 = { - .name = "pck0", - .pmc_mask = AT91_PMC_PCK0, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 0, -}; - -static struct clk pck1 = { - .name = "pck1", - .pmc_mask = AT91_PMC_PCK1, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 1, -}; - -static struct clk pck2 = { - .name = "pck2", - .pmc_mask = AT91_PMC_PCK2, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 2, -}; - -static struct clk_lookup periph_clocks_lookups[] = { - /* lookup table for DT entries */ - CLKDEV_CON_DEV_ID("usart", "ffffee00.serial", &mck), - CLKDEV_CON_DEV_ID(NULL, "fffff200.gpio", &pioA_clk), - CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioB_clk), - CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioC_clk), - CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioD_clk), - CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioE_clk), - CLKDEV_CON_DEV_ID("usart", "f001c000.serial", &usart0_clk), - CLKDEV_CON_DEV_ID("usart", "f0020000.serial", &usart1_clk), - CLKDEV_CON_DEV_ID("usart", "f8020000.serial", &usart2_clk), - CLKDEV_CON_DEV_ID("usart", "f8024000.serial", &usart3_clk), - CLKDEV_CON_DEV_ID(NULL, "f0014000.i2c", &twi0_clk), - CLKDEV_CON_DEV_ID(NULL, "f0018000.i2c", &twi1_clk), - CLKDEV_CON_DEV_ID(NULL, "f801c000.i2c", &twi2_clk), - CLKDEV_CON_DEV_ID("mci_clk", "f0000000.mmc", &mmc0_clk), - CLKDEV_CON_DEV_ID("mci_clk", "f8000000.mmc", &mmc1_clk), - CLKDEV_CON_DEV_ID("mci_clk", "f8004000.mmc", &mmc2_clk), - CLKDEV_CON_DEV_ID("spi_clk", "f0004000.spi", &spi0_clk), - CLKDEV_CON_DEV_ID("spi_clk", "f8008000.spi", &spi1_clk), - CLKDEV_CON_DEV_ID("t0_clk", "f0010000.timer", &tcb0_clk), - CLKDEV_CON_DEV_ID("t0_clk", "f8014000.timer", &tcb1_clk), - CLKDEV_CON_DEV_ID("tsc_clk", "f8018000.tsadcc", &adc_clk), - CLKDEV_CON_DEV_ID("dma_clk", "ffffe600.dma-controller", &dma0_clk), - CLKDEV_CON_DEV_ID("dma_clk", "ffffe800.dma-controller", &dma1_clk), - CLKDEV_CON_DEV_ID("hclk", "600000.ohci", &uhphs_clk), - CLKDEV_CON_DEV_ID("ohci_clk", "600000.ohci", &uhphs_clk), - CLKDEV_CON_DEV_ID("ehci_clk", "700000.ehci", &uhphs_clk), - CLKDEV_CON_DEV_ID("pclk", "500000.gadget", &udphs_clk), - CLKDEV_CON_DEV_ID("hclk", "500000.gadget", &utmi_clk), - CLKDEV_CON_DEV_ID("hclk", "f0028000.ethernet", &macb0_clk), - CLKDEV_CON_DEV_ID("pclk", "f0028000.ethernet", &macb0_clk), - CLKDEV_CON_DEV_ID("hclk", "f802c000.ethernet", &macb1_clk), - CLKDEV_CON_DEV_ID("pclk", "f802c000.ethernet", &macb1_clk), - CLKDEV_CON_DEV_ID("pclk", "f0008000.ssc", &ssc0_clk), - CLKDEV_CON_DEV_ID("pclk", "f000c000.ssc", &ssc1_clk), - CLKDEV_CON_DEV_ID("can_clk", "f000c000.can", &can0_clk), - CLKDEV_CON_DEV_ID("can_clk", "f8010000.can", &can1_clk), - CLKDEV_CON_DEV_ID("sha_clk", "f8034000.sha", &sha_clk), - CLKDEV_CON_DEV_ID("aes_clk", "f8038000.aes", &aes_clk), - CLKDEV_CON_DEV_ID("tdes_clk", "f803c000.tdes", &tdes_clk), -}; - -static void __init sama5d3_register_clocks(void) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) - clk_register(periph_clocks[i]); - - clkdev_add_table(periph_clocks_lookups, - ARRAY_SIZE(periph_clocks_lookups)); - - clk_register(&pck0); - clk_register(&pck1); - clk_register(&pck2); -} - -/* -------------------------------------------------------------------- * AT91SAM9x5 processor initialization * -------------------------------------------------------------------- */ @@ -378,6 +37,5 @@ static void __init sama5d3_initialize(void) AT91_SOC_START(sama5d3) .map_io = sama5d3_map_io, - .register_clocks = sama5d3_register_clocks, .init = sama5d3_initialize, AT91_SOC_END diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c index 094b3459c28..7d3f7cc6108 100644 --- a/arch/arm/mach-at91/setup.c +++ b/arch/arm/mach-at91/setup.c @@ -11,6 +11,7 @@ #include <linux/pm.h> #include <linux/of_address.h> #include <linux/pinctrl/machine.h> +#include <linux/clk/at91_pmc.h> #include <asm/system_misc.h> #include <asm/mach/map.h> @@ -18,7 +19,6 @@ #include <mach/hardware.h> #include <mach/cpu.h> #include <mach/at91_dbgu.h> -#include <mach/at91_pmc.h> #include "at91_shdwc.h" #include "soc.h" @@ -491,7 +491,8 @@ void __init at91rm9200_dt_initialize(void) at91_dt_clock_init(); /* Register the processor-specific clocks */ - at91_boot_soc.register_clocks(); + if (at91_boot_soc.register_clocks) + at91_boot_soc.register_clocks(); at91_boot_soc.init(); } @@ -506,7 +507,8 @@ void __init at91_dt_initialize(void) at91_dt_clock_init(); /* Register the processor-specific clocks */ - at91_boot_soc.register_clocks(); + if (at91_boot_soc.register_clocks) + at91_boot_soc.register_clocks(); if (at91_boot_soc.init) at91_boot_soc.init(); diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 1f25f3e99c0..adcef406ff0 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -19,11 +19,11 @@ secure-common = omap-smc.o omap-secure.o obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common) obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common) -obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) $(secure-common) +obj-$(CONFIG_ARCH_OMAP4) += $(hwmod-common) $(secure-common) obj-$(CONFIG_SOC_AM33XX) += irq.o $(hwmod-common) -obj-$(CONFIG_SOC_OMAP5) += prm44xx.o $(hwmod-common) $(secure-common) +obj-$(CONFIG_SOC_OMAP5) += $(hwmod-common) $(secure-common) obj-$(CONFIG_SOC_AM43XX) += $(hwmod-common) $(secure-common) -obj-$(CONFIG_SOC_DRA7XX) += prm44xx.o $(hwmod-common) $(secure-common) +obj-$(CONFIG_SOC_DRA7XX) += $(hwmod-common) $(secure-common) ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),) obj-y += mcbsp.o diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index f7644febee8..e30ef6797c6 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -299,7 +299,6 @@ struct omap_sdrc_params; extern void omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0, struct omap_sdrc_params *sdrc_cs1); struct omap2_hsmmc_info; -extern int omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers); extern void omap_reserve(void); struct omap_hwmod; diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index a4e536b11ec..58347bb874a 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -32,7 +32,6 @@ #include "soc.h" #include "iomap.h" -#include "mux.h" #include "control.h" #include "display.h" #include "prm.h" @@ -102,90 +101,13 @@ static const struct omap_dss_hwmod_data omap4_dss_hwmod_data[] __initconst = { { "dss_hdmi", "omapdss_hdmi", -1 }, }; -static void __init omap4_tpd12s015_mux_pads(void) -{ - omap_mux_init_signal("hdmi_cec", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("hdmi_ddc_scl", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("hdmi_ddc_sda", - OMAP_PIN_INPUT_PULLUP); -} - -static void __init omap4_hdmi_mux_pads(enum omap_hdmi_flags flags) -{ - u32 reg; - u16 control_i2c_1; - - /* - * CONTROL_I2C_1: HDMI_DDC_SDA_PULLUPRESX (bit 28) and - * HDMI_DDC_SCL_PULLUPRESX (bit 24) are set to disable - * internal pull up resistor. - */ - if (flags & OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP) { - control_i2c_1 = OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_I2C_1; - reg = omap4_ctrl_pad_readl(control_i2c_1); - reg |= (OMAP4_HDMI_DDC_SDA_PULLUPRESX_MASK | - OMAP4_HDMI_DDC_SCL_PULLUPRESX_MASK); - omap4_ctrl_pad_writel(reg, control_i2c_1); - } -} - -static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes) -{ - u32 enable_mask, enable_shift; - u32 pipd_mask, pipd_shift; - u32 reg; - - if (dsi_id == 0) { - enable_mask = OMAP4_DSI1_LANEENABLE_MASK; - enable_shift = OMAP4_DSI1_LANEENABLE_SHIFT; - pipd_mask = OMAP4_DSI1_PIPD_MASK; - pipd_shift = OMAP4_DSI1_PIPD_SHIFT; - } else if (dsi_id == 1) { - enable_mask = OMAP4_DSI2_LANEENABLE_MASK; - enable_shift = OMAP4_DSI2_LANEENABLE_SHIFT; - pipd_mask = OMAP4_DSI2_PIPD_MASK; - pipd_shift = OMAP4_DSI2_PIPD_SHIFT; - } else { - return -ENODEV; - } - - reg = omap4_ctrl_pad_readl(OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY); - - reg &= ~enable_mask; - reg &= ~pipd_mask; - - reg |= (lanes << enable_shift) & enable_mask; - reg |= (lanes << pipd_shift) & pipd_mask; - - omap4_ctrl_pad_writel(reg, OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY); - - return 0; -} - -int __init omap_hdmi_init(enum omap_hdmi_flags flags) -{ - if (cpu_is_omap44xx()) { - omap4_hdmi_mux_pads(flags); - omap4_tpd12s015_mux_pads(); - } - - return 0; -} - static int omap_dsi_enable_pads(int dsi_id, unsigned lane_mask) { - if (cpu_is_omap44xx()) - return omap4_dsi_mux_pads(dsi_id, lane_mask); - return 0; } static void omap_dsi_disable_pads(int dsi_id, unsigned lane_mask) { - if (cpu_is_omap44xx()) - omap4_dsi_mux_pads(dsi_id, 0); } static int omap_dss_set_min_bus_tput(struct device *dev, unsigned long tput) diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 81de5625195..d24926e6340 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -1502,6 +1502,22 @@ static int gpmc_probe_generic_child(struct platform_device *pdev, } /* + * For some GPMC devices we still need to rely on the bootloader + * timings because the devices can be connected via FPGA. So far + * the list is smc91x on the omap2 SDP boards, and 8250 on zooms. + * REVISIT: Add timing support from slls644g.pdf and from the + * lan91c96 manual. + */ + if (of_device_is_compatible(child, "ns16550a") || + of_device_is_compatible(child, "smsc,lan91c94") || + of_device_is_compatible(child, "smsc,lan91c111")) { + dev_warn(&pdev->dev, + "%s using bootloader timings on CS%d\n", + child->name, cs); + goto no_timings; + } + + /* * FIXME: gpmc_cs_request() will map the CS to an arbitary * location in the gpmc address space. When booting with * device-tree we want the NOR flash to be mapped to the @@ -1529,6 +1545,7 @@ static int gpmc_probe_generic_child(struct platform_device *pdev, gpmc_read_timings_dt(child, &gpmc_t); gpmc_cs_set_timings(cs, &gpmc_t); +no_timings: if (of_platform_device_create(child, NULL, &pdev->dev)) return 0; @@ -1541,42 +1558,6 @@ err: return ret; } -/* - * REVISIT: Add timing support from slls644g.pdf - */ -static int gpmc_probe_8250(struct platform_device *pdev, - struct device_node *child) -{ - struct resource res; - unsigned long base; - int ret, cs; - - if (of_property_read_u32(child, "reg", &cs) < 0) { - dev_err(&pdev->dev, "%s has no 'reg' property\n", - child->full_name); - return -ENODEV; - } - - if (of_address_to_resource(child, 0, &res) < 0) { - dev_err(&pdev->dev, "%s has malformed 'reg' property\n", - child->full_name); - return -ENODEV; - } - - ret = gpmc_cs_request(cs, resource_size(&res), &base); - if (ret < 0) { - dev_err(&pdev->dev, "cannot request GPMC CS %d\n", cs); - return ret; - } - - if (of_platform_device_create(child, NULL, &pdev->dev)) - return 0; - - dev_err(&pdev->dev, "failed to create gpmc child %s\n", child->name); - - return -ENODEV; -} - static int gpmc_probe_dt(struct platform_device *pdev) { int ret; @@ -1618,10 +1599,9 @@ static int gpmc_probe_dt(struct platform_device *pdev) else if (of_node_cmp(child->name, "onenand") == 0) ret = gpmc_probe_onenand_child(pdev, child); else if (of_node_cmp(child->name, "ethernet") == 0 || - of_node_cmp(child->name, "nor") == 0) + of_node_cmp(child->name, "nor") == 0 || + of_node_cmp(child->name, "uart") == 0) ret = gpmc_probe_generic_child(pdev, child); - else if (of_node_cmp(child->name, "8250") == 0) - ret = gpmc_probe_8250(pdev, child); if (WARN(ret < 0, "%s: probing gpmc child %s failed\n", __func__, child->full_name)) diff --git a/arch/arm/mach-omap2/omap-secure.h b/arch/arm/mach-omap2/omap-secure.h index 8cc7d331437..3e97c6c8ecf 100644 --- a/arch/arm/mach-omap2/omap-secure.h +++ b/arch/arm/mach-omap2/omap-secure.h @@ -76,6 +76,13 @@ static inline void omap_barrier_reserve_memblock(void) { } #endif +#ifdef CONFIG_SOC_HAS_REALTIME_COUNTER void set_cntfreq(void); +#else +static inline void set_cntfreq(void) +{ +} +#endif + #endif /* __ASSEMBLER__ */ #endif /* OMAP_ARCH_OMAP_SECURE_H */ diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index 57911430324..b39efd46abf 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -35,7 +35,6 @@ #include "iomap.h" #include "common.h" #include "mmc.h" -#include "hsmmc.h" #include "prminst44xx.h" #include "prcm_mpu44xx.h" #include "omap4-sar-layout.h" @@ -284,59 +283,3 @@ skip_errata_init: omap_wakeupgen_init(); irqchip_init(); } - -#if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE) -static int omap4_twl6030_hsmmc_late_init(struct device *dev) -{ - int irq = 0; - struct platform_device *pdev = container_of(dev, - struct platform_device, dev); - struct omap_mmc_platform_data *pdata = dev->platform_data; - - /* Setting MMC1 Card detect Irq */ - if (pdev->id == 0) { - irq = twl6030_mmc_card_detect_config(); - if (irq < 0) { - dev_err(dev, "%s: Error card detect config(%d)\n", - __func__, irq); - return irq; - } - pdata->slots[0].card_detect_irq = irq; - pdata->slots[0].card_detect = twl6030_mmc_card_detect; - } - return 0; -} - -static __init void omap4_twl6030_hsmmc_set_late_init(struct device *dev) -{ - struct omap_mmc_platform_data *pdata; - - /* dev can be null if CONFIG_MMC_OMAP_HS is not set */ - if (!dev) { - pr_err("Failed %s\n", __func__); - return; - } - pdata = dev->platform_data; - pdata->init = omap4_twl6030_hsmmc_late_init; -} - -int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers) -{ - struct omap2_hsmmc_info *c; - - omap_hsmmc_init(controllers); - for (c = controllers; c->mmc; c++) { - /* pdev can be null if CONFIG_MMC_OMAP_HS is not set */ - if (!c->pdev) - continue; - omap4_twl6030_hsmmc_set_late_init(&c->pdev->dev); - } - - return 0; -} -#else -int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers) -{ - return 0; -} -#endif diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 93b80e5da8d..1f3770a8a72 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -120,7 +120,7 @@ static void omap3_save_secure_ram_context(void) * will hang the system. */ pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON); - ret = _omap_save_secure_sram((u32 *) + ret = _omap_save_secure_sram((u32 *)(unsigned long) __pa(omap3_secure_ram_storage)); pwrdm_set_next_pwrst(mpu_pwrdm, mpu_next_state); /* Following is for error tracking, it should not happen */ diff --git a/arch/arm/mach-omap2/prm44xx_54xx.h b/arch/arm/mach-omap2/prm44xx_54xx.h index 7a976065e13..8d95aa543ef 100644 --- a/arch/arm/mach-omap2/prm44xx_54xx.h +++ b/arch/arm/mach-omap2/prm44xx_54xx.h @@ -43,7 +43,7 @@ extern void omap4_prm_vcvp_write(u32 val, u8 offset); extern u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset); #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \ - defined(CONFIG_SOC_DRA7XX) + defined(CONFIG_SOC_DRA7XX) || defined(CONFIG_SOC_AM43XX) void omap44xx_prm_reconfigure_io_chain(void); #else static inline void omap44xx_prm_reconfigure_io_chain(void) diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig index 2cb8dc55b50..7094bccbae9 100644 --- a/arch/arm/mach-s3c64xx/Kconfig +++ b/arch/arm/mach-s3c64xx/Kconfig @@ -17,9 +17,10 @@ config CPU_S3C6410 help Enable S3C6410 CPU support -config S3C64XX_DMA - bool "S3C64XX DMA" - select S3C_DMA +config S3C64XX_PL080 + bool "S3C64XX DMA using generic PL08x driver" + select AMBA_PL08X + select SAMSUNG_DMADEV config S3C64XX_SETUP_SDHCI bool diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile index 6faedcffce0..58069a702a4 100644 --- a/arch/arm/mach-s3c64xx/Makefile +++ b/arch/arm/mach-s3c64xx/Makefile @@ -26,7 +26,7 @@ obj-$(CONFIG_CPU_IDLE) += cpuidle.o # DMA support -obj-$(CONFIG_S3C64XX_DMA) += dma.o +obj-$(CONFIG_S3C64XX_PL080) += pl080.o # Device support diff --git a/arch/arm/mach-s3c64xx/common.h b/arch/arm/mach-s3c64xx/common.h index bd3bd562011..7043e7a3a67 100644 --- a/arch/arm/mach-s3c64xx/common.h +++ b/arch/arm/mach-s3c64xx/common.h @@ -58,4 +58,9 @@ int __init s3c64xx_pm_late_initcall(void); static inline int s3c64xx_pm_late_initcall(void) { return 0; } #endif +#ifdef CONFIG_S3C64XX_PL080 +extern struct pl08x_platform_data s3c64xx_dma0_plat_data; +extern struct pl08x_platform_data s3c64xx_dma1_plat_data; +#endif + #endif /* __ARCH_ARM_MACH_S3C64XX_COMMON_H */ diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c deleted file mode 100644 index 7e22c211381..00000000000 --- a/arch/arm/mach-s3c64xx/dma.c +++ /dev/null @@ -1,762 +0,0 @@ -/* linux/arch/arm/plat-s3c64xx/dma.c - * - * Copyright 2009 Openmoko, Inc. - * Copyright 2009 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C64XX DMA core - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* - * NOTE: Code in this file is not used when booting with Device Tree support. - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/dmapool.h> -#include <linux/device.h> -#include <linux/errno.h> -#include <linux/slab.h> -#include <linux/delay.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/io.h> -#include <linux/amba/pl080.h> -#include <linux/of.h> - -#include <mach/dma.h> -#include <mach/map.h> -#include <mach/irqs.h> - -#include "regs-sys.h" - -/* dma channel state information */ - -struct s3c64xx_dmac { - struct device dev; - struct clk *clk; - void __iomem *regs; - struct s3c2410_dma_chan *channels; - enum dma_ch chanbase; -}; - -/* pool to provide LLI buffers */ -static struct dma_pool *dma_pool; - -/* Debug configuration and code */ - -static unsigned char debug_show_buffs = 0; - -static void dbg_showchan(struct s3c2410_dma_chan *chan) -{ - pr_debug("DMA%d: %08x->%08x L %08x C %08x,%08x S %08x\n", - chan->number, - readl(chan->regs + PL080_CH_SRC_ADDR), - readl(chan->regs + PL080_CH_DST_ADDR), - readl(chan->regs + PL080_CH_LLI), - readl(chan->regs + PL080_CH_CONTROL), - readl(chan->regs + PL080S_CH_CONTROL2), - readl(chan->regs + PL080S_CH_CONFIG)); -} - -static void show_lli(struct pl080s_lli *lli) -{ - pr_debug("LLI[%p] %08x->%08x, NL %08x C %08x,%08x\n", - lli, lli->src_addr, lli->dst_addr, lli->next_lli, - lli->control0, lli->control1); -} - -static void dbg_showbuffs(struct s3c2410_dma_chan *chan) -{ - struct s3c64xx_dma_buff *ptr; - struct s3c64xx_dma_buff *end; - - pr_debug("DMA%d: buffs next %p, curr %p, end %p\n", - chan->number, chan->next, chan->curr, chan->end); - - ptr = chan->next; - end = chan->end; - - if (debug_show_buffs) { - for (; ptr != NULL; ptr = ptr->next) { - pr_debug("DMA%d: %08x ", - chan->number, ptr->lli_dma); - show_lli(ptr->lli); - } - } -} - -/* End of Debug */ - -static struct s3c2410_dma_chan *s3c64xx_dma_map_channel(unsigned int channel) -{ - struct s3c2410_dma_chan *chan; - unsigned int start, offs; - - start = 0; - - if (channel >= DMACH_PCM1_TX) - start = 8; - - for (offs = 0; offs < 8; offs++) { - chan = &s3c2410_chans[start + offs]; - if (!chan->in_use) - goto found; - } - - return NULL; - -found: - s3c_dma_chan_map[channel] = chan; - return chan; -} - -int s3c2410_dma_config(enum dma_ch channel, int xferunit) -{ - struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); - - if (chan == NULL) - return -EINVAL; - - switch (xferunit) { - case 1: - chan->hw_width = 0; - break; - case 2: - chan->hw_width = 1; - break; - case 4: - chan->hw_width = 2; - break; - default: - printk(KERN_ERR "%s: illegal width %d\n", __func__, xferunit); - return -EINVAL; - } - - return 0; -} -EXPORT_SYMBOL(s3c2410_dma_config); - -static void s3c64xx_dma_fill_lli(struct s3c2410_dma_chan *chan, - struct pl080s_lli *lli, - dma_addr_t data, int size) -{ - dma_addr_t src, dst; - u32 control0, control1; - - switch (chan->source) { - case DMA_FROM_DEVICE: - src = chan->dev_addr; - dst = data; - control0 = PL080_CONTROL_SRC_AHB2; - control0 |= PL080_CONTROL_DST_INCR; - break; - - case DMA_TO_DEVICE: - src = data; - dst = chan->dev_addr; - control0 = PL080_CONTROL_DST_AHB2; - control0 |= PL080_CONTROL_SRC_INCR; - break; - default: - BUG(); - } - - /* note, we do not currently setup any of the burst controls */ - - control1 = size >> chan->hw_width; /* size in no of xfers */ - control0 |= PL080_CONTROL_PROT_SYS; /* always in priv. mode */ - control0 |= PL080_CONTROL_TC_IRQ_EN; /* always fire IRQ */ - control0 |= (u32)chan->hw_width << PL080_CONTROL_DWIDTH_SHIFT; - control0 |= (u32)chan->hw_width << PL080_CONTROL_SWIDTH_SHIFT; - - lli->src_addr = src; - lli->dst_addr = dst; - lli->next_lli = 0; - lli->control0 = control0; - lli->control1 = control1; -} - -static void s3c64xx_lli_to_regs(struct s3c2410_dma_chan *chan, - struct pl080s_lli *lli) -{ - void __iomem *regs = chan->regs; - - pr_debug("%s: LLI %p => regs\n", __func__, lli); - show_lli(lli); - - writel(lli->src_addr, regs + PL080_CH_SRC_ADDR); - writel(lli->dst_addr, regs + PL080_CH_DST_ADDR); - writel(lli->next_lli, regs + PL080_CH_LLI); - writel(lli->control0, regs + PL080_CH_CONTROL); - writel(lli->control1, regs + PL080S_CH_CONTROL2); -} - -static int s3c64xx_dma_start(struct s3c2410_dma_chan *chan) -{ - struct s3c64xx_dmac *dmac = chan->dmac; - u32 config; - u32 bit = chan->bit; - - dbg_showchan(chan); - - pr_debug("%s: clearing interrupts\n", __func__); - - /* clear interrupts */ - writel(bit, dmac->regs + PL080_TC_CLEAR); - writel(bit, dmac->regs + PL080_ERR_CLEAR); - - pr_debug("%s: starting channel\n", __func__); - - config = readl(chan->regs + PL080S_CH_CONFIG); - config |= PL080_CONFIG_ENABLE; - config &= ~PL080_CONFIG_HALT; - - pr_debug("%s: writing config %08x\n", __func__, config); - writel(config, chan->regs + PL080S_CH_CONFIG); - - return 0; -} - -static int s3c64xx_dma_stop(struct s3c2410_dma_chan *chan) -{ - u32 config; - int timeout; - - pr_debug("%s: stopping channel\n", __func__); - - dbg_showchan(chan); - - config = readl(chan->regs + PL080S_CH_CONFIG); - config |= PL080_CONFIG_HALT; - writel(config, chan->regs + PL080S_CH_CONFIG); - - timeout = 1000; - do { - config = readl(chan->regs + PL080S_CH_CONFIG); - pr_debug("%s: %d - config %08x\n", __func__, timeout, config); - if (config & PL080_CONFIG_ACTIVE) - udelay(10); - else - break; - } while (--timeout > 0); - - if (config & PL080_CONFIG_ACTIVE) { - printk(KERN_ERR "%s: channel still active\n", __func__); - return -EFAULT; - } - - config = readl(chan->regs + PL080S_CH_CONFIG); - config &= ~PL080_CONFIG_ENABLE; - writel(config, chan->regs + PL080S_CH_CONFIG); - - return 0; -} - -static inline void s3c64xx_dma_bufffdone(struct s3c2410_dma_chan *chan, - struct s3c64xx_dma_buff *buf, - enum s3c2410_dma_buffresult result) -{ - if (chan->callback_fn != NULL) - (chan->callback_fn)(chan, buf->pw, 0, result); -} - -static void s3c64xx_dma_freebuff(struct s3c64xx_dma_buff *buff) -{ - dma_pool_free(dma_pool, buff->lli, buff->lli_dma); - kfree(buff); -} - -static int s3c64xx_dma_flush(struct s3c2410_dma_chan *chan) -{ - struct s3c64xx_dma_buff *buff, *next; - u32 config; - - dbg_showchan(chan); - - pr_debug("%s: flushing channel\n", __func__); - - config = readl(chan->regs + PL080S_CH_CONFIG); - config &= ~PL080_CONFIG_ENABLE; - writel(config, chan->regs + PL080S_CH_CONFIG); - - /* dump all the buffers associated with this channel */ - - for (buff = chan->curr; buff != NULL; buff = next) { - next = buff->next; - pr_debug("%s: buff %p (next %p)\n", __func__, buff, buff->next); - - s3c64xx_dma_bufffdone(chan, buff, S3C2410_RES_ABORT); - s3c64xx_dma_freebuff(buff); - } - - chan->curr = chan->next = chan->end = NULL; - - return 0; -} - -int s3c2410_dma_ctrl(enum dma_ch channel, enum s3c2410_chan_op op) -{ - struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); - - WARN_ON(!chan); - if (!chan) - return -EINVAL; - - switch (op) { - case S3C2410_DMAOP_START: - return s3c64xx_dma_start(chan); - - case S3C2410_DMAOP_STOP: - return s3c64xx_dma_stop(chan); - - case S3C2410_DMAOP_FLUSH: - return s3c64xx_dma_flush(chan); - - /* believe PAUSE/RESUME are no-ops */ - case S3C2410_DMAOP_PAUSE: - case S3C2410_DMAOP_RESUME: - case S3C2410_DMAOP_STARTED: - case S3C2410_DMAOP_TIMEOUT: - return 0; - } - - return -ENOENT; -} -EXPORT_SYMBOL(s3c2410_dma_ctrl); - -/* s3c2410_dma_enque - * - */ - -int s3c2410_dma_enqueue(enum dma_ch channel, void *id, - dma_addr_t data, int size) -{ - struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); - struct s3c64xx_dma_buff *next; - struct s3c64xx_dma_buff *buff; - struct pl080s_lli *lli; - unsigned long flags; - int ret; - - WARN_ON(!chan); - if (!chan) - return -EINVAL; - - buff = kzalloc(sizeof(struct s3c64xx_dma_buff), GFP_ATOMIC); - if (!buff) { - printk(KERN_ERR "%s: no memory for buffer\n", __func__); - return -ENOMEM; - } - - lli = dma_pool_alloc(dma_pool, GFP_ATOMIC, &buff->lli_dma); - if (!lli) { - printk(KERN_ERR "%s: no memory for lli\n", __func__); - ret = -ENOMEM; - goto err_buff; - } - - pr_debug("%s: buff %p, dp %08x lli (%p, %08x) %d\n", - __func__, buff, data, lli, (u32)buff->lli_dma, size); - - buff->lli = lli; - buff->pw = id; - - s3c64xx_dma_fill_lli(chan, lli, data, size); - - local_irq_save(flags); - - if ((next = chan->next) != NULL) { - struct s3c64xx_dma_buff *end = chan->end; - struct pl080s_lli *endlli = end->lli; - - pr_debug("enquing onto channel\n"); - - end->next = buff; - endlli->next_lli = buff->lli_dma; - - if (chan->flags & S3C2410_DMAF_CIRCULAR) { - struct s3c64xx_dma_buff *curr = chan->curr; - lli->next_lli = curr->lli_dma; - } - - if (next == chan->curr) { - writel(buff->lli_dma, chan->regs + PL080_CH_LLI); - chan->next = buff; - } - - show_lli(endlli); - chan->end = buff; - } else { - pr_debug("enquing onto empty channel\n"); - - chan->curr = buff; - chan->next = buff; - chan->end = buff; - - s3c64xx_lli_to_regs(chan, lli); - } - - local_irq_restore(flags); - - show_lli(lli); - - dbg_showchan(chan); - dbg_showbuffs(chan); - return 0; - -err_buff: - kfree(buff); - return ret; -} - -EXPORT_SYMBOL(s3c2410_dma_enqueue); - - -int s3c2410_dma_devconfig(enum dma_ch channel, - enum dma_data_direction source, - unsigned long devaddr) -{ - struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); - u32 peripheral; - u32 config = 0; - - pr_debug("%s: channel %d, source %d, dev %08lx, chan %p\n", - __func__, channel, source, devaddr, chan); - - WARN_ON(!chan); - if (!chan) - return -EINVAL; - - peripheral = (chan->peripheral & 0xf); - chan->source = source; - chan->dev_addr = devaddr; - - pr_debug("%s: peripheral %d\n", __func__, peripheral); - - switch (source) { - case DMA_FROM_DEVICE: - config = 2 << PL080_CONFIG_FLOW_CONTROL_SHIFT; - config |= peripheral << PL080_CONFIG_SRC_SEL_SHIFT; - break; - case DMA_TO_DEVICE: - config = 1 << PL080_CONFIG_FLOW_CONTROL_SHIFT; - config |= peripheral << PL080_CONFIG_DST_SEL_SHIFT; - break; - default: - printk(KERN_ERR "%s: bad source\n", __func__); - return -EINVAL; - } - - /* allow TC and ERR interrupts */ - config |= PL080_CONFIG_TC_IRQ_MASK; - config |= PL080_CONFIG_ERR_IRQ_MASK; - - pr_debug("%s: config %08x\n", __func__, config); - - writel(config, chan->regs + PL080S_CH_CONFIG); - - return 0; -} -EXPORT_SYMBOL(s3c2410_dma_devconfig); - - -int s3c2410_dma_getposition(enum dma_ch channel, - dma_addr_t *src, dma_addr_t *dst) -{ - struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); - - WARN_ON(!chan); - if (!chan) - return -EINVAL; - - if (src != NULL) - *src = readl(chan->regs + PL080_CH_SRC_ADDR); - - if (dst != NULL) - *dst = readl(chan->regs + PL080_CH_DST_ADDR); - - return 0; -} -EXPORT_SYMBOL(s3c2410_dma_getposition); - -/* s3c2410_request_dma - * - * get control of an dma channel -*/ - -int s3c2410_dma_request(enum dma_ch channel, - struct s3c2410_dma_client *client, - void *dev) -{ - struct s3c2410_dma_chan *chan; - unsigned long flags; - - pr_debug("dma%d: s3c2410_request_dma: client=%s, dev=%p\n", - channel, client->name, dev); - - local_irq_save(flags); - - chan = s3c64xx_dma_map_channel(channel); - if (chan == NULL) { - local_irq_restore(flags); - return -EBUSY; - } - - dbg_showchan(chan); - - chan->client = client; - chan->in_use = 1; - chan->peripheral = channel; - chan->flags = 0; - - local_irq_restore(flags); - - /* need to setup */ - - pr_debug("%s: channel initialised, %p\n", __func__, chan); - - return chan->number | DMACH_LOW_LEVEL; -} - -EXPORT_SYMBOL(s3c2410_dma_request); - -/* s3c2410_dma_free - * - * release the given channel back to the system, will stop and flush - * any outstanding transfers, and ensure the channel is ready for the - * next claimant. - * - * Note, although a warning is currently printed if the freeing client - * info is not the same as the registrant's client info, the free is still - * allowed to go through. -*/ - -int s3c2410_dma_free(enum dma_ch channel, struct s3c2410_dma_client *client) -{ - struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); - unsigned long flags; - - if (chan == NULL) - return -EINVAL; - - local_irq_save(flags); - - if (chan->client != client) { - printk(KERN_WARNING "dma%d: possible free from different client (channel %p, passed %p)\n", - channel, chan->client, client); - } - - /* sort out stopping and freeing the channel */ - - - chan->client = NULL; - chan->in_use = 0; - - if (!(channel & DMACH_LOW_LEVEL)) - s3c_dma_chan_map[channel] = NULL; - - local_irq_restore(flags); - - return 0; -} - -EXPORT_SYMBOL(s3c2410_dma_free); - -static irqreturn_t s3c64xx_dma_irq(int irq, void *pw) -{ - struct s3c64xx_dmac *dmac = pw; - struct s3c2410_dma_chan *chan; - enum s3c2410_dma_buffresult res; - u32 tcstat, errstat; - u32 bit; - int offs; - - tcstat = readl(dmac->regs + PL080_TC_STATUS); - errstat = readl(dmac->regs + PL080_ERR_STATUS); - - for (offs = 0, bit = 1; offs < 8; offs++, bit <<= 1) { - struct s3c64xx_dma_buff *buff; - - if (!(errstat & bit) && !(tcstat & bit)) - continue; - - chan = dmac->channels + offs; - res = S3C2410_RES_ERR; - - if (tcstat & bit) { - writel(bit, dmac->regs + PL080_TC_CLEAR); - res = S3C2410_RES_OK; - } - - if (errstat & bit) - writel(bit, dmac->regs + PL080_ERR_CLEAR); - - /* 'next' points to the buffer that is next to the - * currently active buffer. - * For CIRCULAR queues, 'next' will be same as 'curr' - * when 'end' is the active buffer. - */ - buff = chan->curr; - while (buff && buff != chan->next - && buff->next != chan->next) - buff = buff->next; - - if (!buff) - BUG(); - - if (buff == chan->next) - buff = chan->end; - - s3c64xx_dma_bufffdone(chan, buff, res); - - /* Free the node and update curr, if non-circular queue */ - if (!(chan->flags & S3C2410_DMAF_CIRCULAR)) { - chan->curr = buff->next; - s3c64xx_dma_freebuff(buff); - } - - /* Update 'next' */ - buff = chan->next; - if (chan->next == chan->end) { - chan->next = chan->curr; - if (!(chan->flags & S3C2410_DMAF_CIRCULAR)) - chan->end = NULL; - } else { - chan->next = buff->next; - } - } - - return IRQ_HANDLED; -} - -static struct bus_type dma_subsys = { - .name = "s3c64xx-dma", - .dev_name = "s3c64xx-dma", -}; - -static int s3c64xx_dma_init1(int chno, enum dma_ch chbase, - int irq, unsigned int base) -{ - struct s3c2410_dma_chan *chptr = &s3c2410_chans[chno]; - struct s3c64xx_dmac *dmac; - char clkname[16]; - void __iomem *regs; - void __iomem *regptr; - int err, ch; - - dmac = kzalloc(sizeof(struct s3c64xx_dmac), GFP_KERNEL); - if (!dmac) { - printk(KERN_ERR "%s: failed to alloc mem\n", __func__); - return -ENOMEM; - } - - dmac->dev.id = chno / 8; - dmac->dev.bus = &dma_subsys; - - err = device_register(&dmac->dev); - if (err) { - printk(KERN_ERR "%s: failed to register device\n", __func__); - goto err_alloc; - } - - regs = ioremap(base, 0x200); - if (!regs) { - printk(KERN_ERR "%s: failed to ioremap()\n", __func__); - err = -ENXIO; - goto err_dev; - } - - snprintf(clkname, sizeof(clkname), "dma%d", dmac->dev.id); - - dmac->clk = clk_get(NULL, clkname); - if (IS_ERR(dmac->clk)) { - printk(KERN_ERR "%s: failed to get clock %s\n", __func__, clkname); - err = PTR_ERR(dmac->clk); - goto err_map; - } - - clk_prepare_enable(dmac->clk); - - dmac->regs = regs; - dmac->chanbase = chbase; - dmac->channels = chptr; - - err = request_irq(irq, s3c64xx_dma_irq, 0, "DMA", dmac); - if (err < 0) { - printk(KERN_ERR "%s: failed to get irq\n", __func__); - goto err_clk; - } - - regptr = regs + PL080_Cx_BASE(0); - - for (ch = 0; ch < 8; ch++, chptr++) { - pr_debug("%s: registering DMA %d (%p)\n", - __func__, chno + ch, regptr); - - chptr->bit = 1 << ch; - chptr->number = chno + ch; - chptr->dmac = dmac; - chptr->regs = regptr; - regptr += PL080_Cx_STRIDE; - } - - /* for the moment, permanently enable the controller */ - writel(PL080_CONFIG_ENABLE, regs + PL080_CONFIG); - - printk(KERN_INFO "PL080: IRQ %d, at %p, channels %d..%d\n", - irq, regs, chno, chno+8); - - return 0; - -err_clk: - clk_disable_unprepare(dmac->clk); - clk_put(dmac->clk); -err_map: - iounmap(regs); -err_dev: - device_unregister(&dmac->dev); -err_alloc: - kfree(dmac); - return err; -} - -static int __init s3c64xx_dma_init(void) -{ - int ret; - - /* This driver is not supported when booting with device tree. */ - if (of_have_populated_dt()) - return -ENODEV; - - printk(KERN_INFO "%s: Registering DMA channels\n", __func__); - - dma_pool = dma_pool_create("DMA-LLI", NULL, sizeof(struct pl080s_lli), 16, 0); - if (!dma_pool) { - printk(KERN_ERR "%s: failed to create pool\n", __func__); - return -ENOMEM; - } - - ret = subsys_system_register(&dma_subsys, NULL); - if (ret) { - printk(KERN_ERR "%s: failed to create subsys\n", __func__); - return -ENOMEM; - } - - /* Set all DMA configuration to be DMA, not SDMA */ - writel(0xffffff, S3C64XX_SDMA_SEL); - - /* Register standard DMA controllers */ - s3c64xx_dma_init1(0, DMACH_UART0, IRQ_DMA0, 0x75000000); - s3c64xx_dma_init1(8, DMACH_PCM1_TX, IRQ_DMA1, 0x75100000); - - return 0; -} - -arch_initcall(s3c64xx_dma_init); diff --git a/arch/arm/mach-s3c64xx/include/mach/dma.h b/arch/arm/mach-s3c64xx/include/mach/dma.h index fe1a98cf0e4..059b1fc8503 100644 --- a/arch/arm/mach-s3c64xx/include/mach/dma.h +++ b/arch/arm/mach-s3c64xx/include/mach/dma.h @@ -11,51 +11,48 @@ #ifndef __ASM_ARCH_DMA_H #define __ASM_ARCH_DMA_H __FILE__ -#define S3C_DMA_CHANNELS (16) +#define S3C64XX_DMA_CHAN(name) ((unsigned long)(name)) + +/* DMA0/SDMA0 */ +#define DMACH_UART0 S3C64XX_DMA_CHAN("uart0_tx") +#define DMACH_UART0_SRC2 S3C64XX_DMA_CHAN("uart0_rx") +#define DMACH_UART1 S3C64XX_DMA_CHAN("uart1_tx") +#define DMACH_UART1_SRC2 S3C64XX_DMA_CHAN("uart1_rx") +#define DMACH_UART2 S3C64XX_DMA_CHAN("uart2_tx") +#define DMACH_UART2_SRC2 S3C64XX_DMA_CHAN("uart2_rx") +#define DMACH_UART3 S3C64XX_DMA_CHAN("uart3_tx") +#define DMACH_UART3_SRC2 S3C64XX_DMA_CHAN("uart3_rx") +#define DMACH_PCM0_TX S3C64XX_DMA_CHAN("pcm0_tx") +#define DMACH_PCM0_RX S3C64XX_DMA_CHAN("pcm0_rx") +#define DMACH_I2S0_OUT S3C64XX_DMA_CHAN("i2s0_tx") +#define DMACH_I2S0_IN S3C64XX_DMA_CHAN("i2s0_rx") +#define DMACH_SPI0_TX S3C64XX_DMA_CHAN("spi0_tx") +#define DMACH_SPI0_RX S3C64XX_DMA_CHAN("spi0_rx") +#define DMACH_HSI_I2SV40_TX S3C64XX_DMA_CHAN("i2s2_tx") +#define DMACH_HSI_I2SV40_RX S3C64XX_DMA_CHAN("i2s2_rx") + +/* DMA1/SDMA1 */ +#define DMACH_PCM1_TX S3C64XX_DMA_CHAN("pcm1_tx") +#define DMACH_PCM1_RX S3C64XX_DMA_CHAN("pcm1_rx") +#define DMACH_I2S1_OUT S3C64XX_DMA_CHAN("i2s1_tx") +#define DMACH_I2S1_IN S3C64XX_DMA_CHAN("i2s1_rx") +#define DMACH_SPI1_TX S3C64XX_DMA_CHAN("spi1_tx") +#define DMACH_SPI1_RX S3C64XX_DMA_CHAN("spi1_rx") +#define DMACH_AC97_PCMOUT S3C64XX_DMA_CHAN("ac97_out") +#define DMACH_AC97_PCMIN S3C64XX_DMA_CHAN("ac97_in") +#define DMACH_AC97_MICIN S3C64XX_DMA_CHAN("ac97_mic") +#define DMACH_PWM S3C64XX_DMA_CHAN("pwm") +#define DMACH_IRDA S3C64XX_DMA_CHAN("irda") +#define DMACH_EXTERNAL S3C64XX_DMA_CHAN("external") +#define DMACH_SECURITY_RX S3C64XX_DMA_CHAN("sec_rx") +#define DMACH_SECURITY_TX S3C64XX_DMA_CHAN("sec_tx") -/* see mach-s3c2410/dma.h for notes on dma channel numbers */ - -/* Note, for the S3C64XX architecture we keep the DMACH_ - * defines in the order they are allocated to [S]DMA0/[S]DMA1 - * so that is easy to do DHACH_ -> DMA controller conversion - */ enum dma_ch { - /* DMA0/SDMA0 */ - DMACH_UART0 = 0, - DMACH_UART0_SRC2, - DMACH_UART1, - DMACH_UART1_SRC2, - DMACH_UART2, - DMACH_UART2_SRC2, - DMACH_UART3, - DMACH_UART3_SRC2, - DMACH_PCM0_TX, - DMACH_PCM0_RX, - DMACH_I2S0_OUT, - DMACH_I2S0_IN, - DMACH_SPI0_TX, - DMACH_SPI0_RX, - DMACH_HSI_I2SV40_TX, - DMACH_HSI_I2SV40_RX, + DMACH_MAX = 32 +}; - /* DMA1/SDMA1 */ - DMACH_PCM1_TX = 16, - DMACH_PCM1_RX, - DMACH_I2S1_OUT, - DMACH_I2S1_IN, - DMACH_SPI1_TX, - DMACH_SPI1_RX, - DMACH_AC97_PCMOUT, - DMACH_AC97_PCMIN, - DMACH_AC97_MICIN, - DMACH_PWM, - DMACH_IRDA, - DMACH_EXTERNAL, - DMACH_RES1, - DMACH_RES2, - DMACH_SECURITY_RX, /* SDMA1 only */ - DMACH_SECURITY_TX, /* SDMA1 only */ - DMACH_MAX /* the end */ +struct s3c2410_dma_client { + char *name; }; static inline bool samsung_dma_has_circular(void) @@ -65,67 +62,10 @@ static inline bool samsung_dma_has_circular(void) static inline bool samsung_dma_is_dmadev(void) { - return false; + return true; } -#define S3C2410_DMAF_CIRCULAR (1 << 0) - -#include <plat/dma.h> - -#define DMACH_LOW_LEVEL (1<<28) /* use this to specifiy hardware ch no */ - -struct s3c64xx_dma_buff; - -/** s3c64xx_dma_buff - S3C64XX DMA buffer descriptor - * @next: Pointer to next buffer in queue or ring. - * @pw: Client provided identifier - * @lli: Pointer to hardware descriptor this buffer is associated with. - * @lli_dma: Hardare address of the descriptor. - */ -struct s3c64xx_dma_buff { - struct s3c64xx_dma_buff *next; - - void *pw; - struct pl080s_lli *lli; - dma_addr_t lli_dma; -}; - -struct s3c64xx_dmac; - -struct s3c2410_dma_chan { - unsigned char number; /* number of this dma channel */ - unsigned char in_use; /* channel allocated */ - unsigned char bit; /* bit for enable/disable/etc */ - unsigned char hw_width; - unsigned char peripheral; - - unsigned int flags; - enum dma_data_direction source; - - - dma_addr_t dev_addr; - - struct s3c2410_dma_client *client; - struct s3c64xx_dmac *dmac; /* pointer to controller */ - - void __iomem *regs; - - /* cdriver callbacks */ - s3c2410_dma_cbfn_t callback_fn; /* buffer done callback */ - s3c2410_dma_opfn_t op_fn; /* channel op callback */ - - /* buffer list and information */ - struct s3c64xx_dma_buff *curr; /* current dma buffer */ - struct s3c64xx_dma_buff *next; /* next buffer to load */ - struct s3c64xx_dma_buff *end; /* end of queue */ - - /* note, when channel is running in circular mode, curr is the - * first buffer enqueued, end is the last and curr is where the - * last buffer-done event is set-at. The buffers are not freed - * and the last buffer hardware descriptor points back to the - * first. - */ -}; -#include <plat/dma-core.h> +#include <linux/amba/pl08x.h> +#include <plat/dma-ops.h> #endif /* __ASM_ARCH_IRQ_H */ diff --git a/arch/arm/mach-s3c64xx/pl080.c b/arch/arm/mach-s3c64xx/pl080.c new file mode 100644 index 00000000000..901a984bddc --- /dev/null +++ b/arch/arm/mach-s3c64xx/pl080.c @@ -0,0 +1,244 @@ +/* + * Samsung's S3C64XX generic DMA support using amba-pl08x driver. + * + * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/amba/bus.h> +#include <linux/amba/pl080.h> +#include <linux/amba/pl08x.h> +#include <linux/of.h> + +#include <mach/irqs.h> +#include <mach/map.h> + +#include "regs-sys.h" + +static int pl08x_get_xfer_signal(const struct pl08x_channel_data *cd) +{ + return cd->min_signal; +} + +static void pl08x_put_xfer_signal(const struct pl08x_channel_data *cd, int ch) +{ +} + +/* + * DMA0 + */ + +static struct pl08x_channel_data s3c64xx_dma0_info[] = { + { + .bus_id = "uart0_tx", + .min_signal = 0, + .max_signal = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "uart0_rx", + .min_signal = 1, + .max_signal = 1, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "uart1_tx", + .min_signal = 2, + .max_signal = 2, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "uart1_rx", + .min_signal = 3, + .max_signal = 3, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "uart2_tx", + .min_signal = 4, + .max_signal = 4, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "uart2_rx", + .min_signal = 5, + .max_signal = 5, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "uart3_tx", + .min_signal = 6, + .max_signal = 6, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "uart3_rx", + .min_signal = 7, + .max_signal = 7, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "pcm0_tx", + .min_signal = 8, + .max_signal = 8, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "pcm0_rx", + .min_signal = 9, + .max_signal = 9, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "i2s0_tx", + .min_signal = 10, + .max_signal = 10, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "i2s0_rx", + .min_signal = 11, + .max_signal = 11, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "spi0_tx", + .min_signal = 12, + .max_signal = 12, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "spi0_rx", + .min_signal = 13, + .max_signal = 13, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "i2s2_tx", + .min_signal = 14, + .max_signal = 14, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "i2s2_rx", + .min_signal = 15, + .max_signal = 15, + .periph_buses = PL08X_AHB2, + } +}; + +struct pl08x_platform_data s3c64xx_dma0_plat_data = { + .memcpy_channel = { + .bus_id = "memcpy", + .cctl_memcpy = + (PL080_BSIZE_4 << PL080_CONTROL_SB_SIZE_SHIFT | + PL080_BSIZE_4 << PL080_CONTROL_DB_SIZE_SHIFT | + PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT | + PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT | + PL080_CONTROL_PROT_BUFF | PL080_CONTROL_PROT_CACHE | + PL080_CONTROL_PROT_SYS), + }, + .lli_buses = PL08X_AHB1, + .mem_buses = PL08X_AHB1, + .get_xfer_signal = pl08x_get_xfer_signal, + .put_xfer_signal = pl08x_put_xfer_signal, + .slave_channels = s3c64xx_dma0_info, + .num_slave_channels = ARRAY_SIZE(s3c64xx_dma0_info), +}; + +static AMBA_AHB_DEVICE(s3c64xx_dma0, "dma-pl080s.0", 0, + 0x75000000, {IRQ_DMA0}, &s3c64xx_dma0_plat_data); + +/* + * DMA1 + */ + +static struct pl08x_channel_data s3c64xx_dma1_info[] = { + { + .bus_id = "pcm1_tx", + .min_signal = 0, + .max_signal = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "pcm1_rx", + .min_signal = 1, + .max_signal = 1, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "i2s1_tx", + .min_signal = 2, + .max_signal = 2, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "i2s1_rx", + .min_signal = 3, + .max_signal = 3, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "spi1_tx", + .min_signal = 4, + .max_signal = 4, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "spi1_rx", + .min_signal = 5, + .max_signal = 5, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ac97_out", + .min_signal = 6, + .max_signal = 6, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ac97_in", + .min_signal = 7, + .max_signal = 7, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ac97_mic", + .min_signal = 8, + .max_signal = 8, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "pwm", + .min_signal = 9, + .max_signal = 9, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "irda", + .min_signal = 10, + .max_signal = 10, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "external", + .min_signal = 11, + .max_signal = 11, + .periph_buses = PL08X_AHB2, + }, +}; + +struct pl08x_platform_data s3c64xx_dma1_plat_data = { + .memcpy_channel = { + .bus_id = "memcpy", + .cctl_memcpy = + (PL080_BSIZE_4 << PL080_CONTROL_SB_SIZE_SHIFT | + PL080_BSIZE_4 << PL080_CONTROL_DB_SIZE_SHIFT | + PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT | + PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT | + PL080_CONTROL_PROT_BUFF | PL080_CONTROL_PROT_CACHE | + PL080_CONTROL_PROT_SYS), + }, + .lli_buses = PL08X_AHB1, + .mem_buses = PL08X_AHB1, + .get_xfer_signal = pl08x_get_xfer_signal, + .put_xfer_signal = pl08x_put_xfer_signal, + .slave_channels = s3c64xx_dma1_info, + .num_slave_channels = ARRAY_SIZE(s3c64xx_dma1_info), +}; + +static AMBA_AHB_DEVICE(s3c64xx_dma1, "dma-pl080s.1", 0, + 0x75100000, {IRQ_DMA1}, &s3c64xx_dma1_plat_data); + +static int __init s3c64xx_pl080_init(void) +{ + /* Set all DMA configuration to be DMA, not SDMA */ + writel(0xffffff, S3C64XX_SDMA_SEL); + + if (of_have_populated_dt()) + return 0; + + amba_device_register(&s3c64xx_dma0_device, &iomem_resource); + amba_device_register(&s3c64xx_dma1_device, &iomem_resource); + + return 0; +} +arch_initcall(s3c64xx_pl080_init); diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index 09e740f58b2..00b85fd9285 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -2,6 +2,7 @@ config ARCH_TEGRA bool "NVIDIA Tegra" if ARCH_MULTI_V7 select ARCH_HAS_CPUFREQ select ARCH_REQUIRE_GPIOLIB + select ARCH_SUPPORTS_TRUSTED_FOUNDATIONS select ARM_GIC select CLKSRC_MMIO select CLKSRC_OF diff --git a/arch/arm/mach-tegra/fuse.c b/arch/arm/mach-tegra/fuse.c index d4639c50662..9a4e910c379 100644 --- a/arch/arm/mach-tegra/fuse.c +++ b/arch/arm/mach-tegra/fuse.c @@ -209,13 +209,3 @@ void __init tegra_init_fuse(void) tegra_sku_id, tegra_cpu_process_id, tegra_core_process_id); } - -unsigned long long tegra_chip_uid(void) -{ - unsigned long long lo, hi; - - lo = tegra_fuse_readl(FUSE_UID_LOW); - hi = tegra_fuse_readl(FUSE_UID_HIGH); - return (hi << 32ull) | lo; -} -EXPORT_SYMBOL(tegra_chip_uid); diff --git a/arch/arm/mach-tegra/reset.c b/arch/arm/mach-tegra/reset.c index 568f5bbf979..146fe8e0ae7 100644 --- a/arch/arm/mach-tegra/reset.c +++ b/arch/arm/mach-tegra/reset.c @@ -21,6 +21,7 @@ #include <asm/cacheflush.h> #include <asm/hardware/cache-l2x0.h> +#include <asm/firmware.h> #include "iomap.h" #include "irammap.h" @@ -33,26 +34,18 @@ static bool is_enabled; -static void __init tegra_cpu_reset_handler_enable(void) +static void __init tegra_cpu_reset_handler_set(const u32 reset_address) { - void __iomem *iram_base = IO_ADDRESS(TEGRA_IRAM_RESET_BASE); void __iomem *evp_cpu_reset = IO_ADDRESS(TEGRA_EXCEPTION_VECTORS_BASE + 0x100); void __iomem *sb_ctrl = IO_ADDRESS(TEGRA_SB_BASE); u32 reg; - BUG_ON(is_enabled); - BUG_ON(tegra_cpu_reset_handler_size > TEGRA_IRAM_RESET_HANDLER_SIZE); - - memcpy(iram_base, (void *)__tegra_cpu_reset_handler_start, - tegra_cpu_reset_handler_size); - /* * NOTE: This must be the one and only write to the EVP CPU reset * vector in the entire system. */ - writel(TEGRA_IRAM_RESET_BASE + tegra_cpu_reset_handler_offset, - evp_cpu_reset); + writel(reset_address, evp_cpu_reset); wmb(); reg = readl(evp_cpu_reset); @@ -66,8 +59,33 @@ static void __init tegra_cpu_reset_handler_enable(void) writel(reg, sb_ctrl); wmb(); } +} + +static void __init tegra_cpu_reset_handler_enable(void) +{ + void __iomem *iram_base = IO_ADDRESS(TEGRA_IRAM_RESET_BASE); + const u32 reset_address = TEGRA_IRAM_RESET_BASE + + tegra_cpu_reset_handler_offset; + int err; + + BUG_ON(is_enabled); + BUG_ON(tegra_cpu_reset_handler_size > TEGRA_IRAM_RESET_HANDLER_SIZE); - is_enabled = true; + memcpy(iram_base, (void *)__tegra_cpu_reset_handler_start, + tegra_cpu_reset_handler_size); + + err = call_firmware_op(set_cpu_boot_addr, 0, reset_address); + switch (err) { + case -ENOSYS: + tegra_cpu_reset_handler_set(reset_address); + /* pass-through */ + case 0: + is_enabled = true; + break; + default: + pr_crit("Cannot set CPU reset handler: %d\n", err); + BUG(); + } } void __init tegra_cpu_reset_handler_init(void) diff --git a/arch/arm/mach-tegra/tegra.c b/arch/arm/mach-tegra/tegra.c index 73368176c6e..09a1f8d98ca 100644 --- a/arch/arm/mach-tegra/tegra.c +++ b/arch/arm/mach-tegra/tegra.c @@ -40,6 +40,7 @@ #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/setup.h> +#include <asm/trusted_foundations.h> #include "apbio.h" #include "board.h" @@ -90,6 +91,7 @@ static void __init tegra_init_cache(void) static void __init tegra_init_early(void) { + of_register_trusted_foundations(); tegra_apb_io_init(); tegra_init_fuse(); tegra_cpu_reset_handler_init(); diff --git a/arch/arm/mach-vexpress/spc.c b/arch/arm/mach-vexpress/spc.c index 033d34dcbd3..c26ef5b92ca 100644 --- a/arch/arm/mach-vexpress/spc.c +++ b/arch/arm/mach-vexpress/spc.c @@ -53,6 +53,11 @@ #define A15_BX_ADDR0 0x68 #define A7_BX_ADDR0 0x78 +/* SPC CPU/cluster reset statue */ +#define STANDBYWFI_STAT 0x3c +#define STANDBYWFI_STAT_A15_CPU_MASK(cpu) (1 << (cpu)) +#define STANDBYWFI_STAT_A7_CPU_MASK(cpu) (1 << (3 + (cpu))) + /* SPC system config interface registers */ #define SYSCFG_WDATA 0x70 #define SYSCFG_RDATA 0x74 @@ -213,6 +218,41 @@ void ve_spc_powerdown(u32 cluster, bool enable) writel_relaxed(enable, info->baseaddr + pwdrn_reg); } +static u32 standbywfi_cpu_mask(u32 cpu, u32 cluster) +{ + return cluster_is_a15(cluster) ? + STANDBYWFI_STAT_A15_CPU_MASK(cpu) + : STANDBYWFI_STAT_A7_CPU_MASK(cpu); +} + +/** + * ve_spc_cpu_in_wfi(u32 cpu, u32 cluster) + * + * @cpu: mpidr[7:0] bitfield describing CPU affinity level within cluster + * @cluster: mpidr[15:8] bitfield describing cluster affinity level + * + * @return: non-zero if and only if the specified CPU is in WFI + * + * Take care when interpreting the result of this function: a CPU might + * be in WFI temporarily due to idle, and is not necessarily safely + * parked. + */ +int ve_spc_cpu_in_wfi(u32 cpu, u32 cluster) +{ + int ret; + u32 mask = standbywfi_cpu_mask(cpu, cluster); + + if (cluster >= MAX_CLUSTERS) + return 1; + + ret = readl_relaxed(info->baseaddr + STANDBYWFI_STAT); + + pr_debug("%s: PCFGREG[0x%X] = 0x%08X, mask = 0x%X\n", + __func__, STANDBYWFI_STAT, ret, mask); + + return ret & mask; +} + static int ve_spc_get_performance(int cluster, u32 *freq) { struct ve_spc_opp *opps = info->opps[cluster]; diff --git a/arch/arm/mach-vexpress/spc.h b/arch/arm/mach-vexpress/spc.h index dbd44c3720f..793d065243b 100644 --- a/arch/arm/mach-vexpress/spc.h +++ b/arch/arm/mach-vexpress/spc.h @@ -20,5 +20,6 @@ void ve_spc_global_wakeup_irq(bool set); void ve_spc_cpu_wakeup_irq(u32 cluster, u32 cpu, bool set); void ve_spc_set_resume_addr(u32 cluster, u32 cpu, u32 addr); void ve_spc_powerdown(u32 cluster, bool enable); +int ve_spc_cpu_in_wfi(u32 cpu, u32 cluster); #endif diff --git a/arch/arm/mach-vexpress/tc2_pm.c b/arch/arm/mach-vexpress/tc2_pm.c index 05a364c5077..29e7785a54b 100644 --- a/arch/arm/mach-vexpress/tc2_pm.c +++ b/arch/arm/mach-vexpress/tc2_pm.c @@ -12,6 +12,7 @@ * published by the Free Software Foundation. */ +#include <linux/delay.h> #include <linux/init.h> #include <linux/io.h> #include <linux/kernel.h> @@ -32,11 +33,17 @@ #include "spc.h" /* SCC conf registers */ +#define RESET_CTRL 0x018 +#define RESET_A15_NCORERESET(cpu) (1 << (2 + (cpu))) +#define RESET_A7_NCORERESET(cpu) (1 << (16 + (cpu))) + #define A15_CONF 0x400 #define A7_CONF 0x500 #define SYS_INFO 0x700 #define SPC_BASE 0xb00 +static void __iomem *scc; + /* * We can't use regular spinlocks. In the switcher case, it is possible * for an outbound CPU to call power_down() after its inbound counterpart @@ -190,6 +197,55 @@ static void tc2_pm_power_down(void) tc2_pm_down(0); } +static int tc2_core_in_reset(unsigned int cpu, unsigned int cluster) +{ + u32 mask = cluster ? + RESET_A7_NCORERESET(cpu) + : RESET_A15_NCORERESET(cpu); + + return !(readl_relaxed(scc + RESET_CTRL) & mask); +} + +#define POLL_MSEC 10 +#define TIMEOUT_MSEC 1000 + +static int tc2_pm_power_down_finish(unsigned int cpu, unsigned int cluster) +{ + unsigned tries; + + pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); + BUG_ON(cluster >= TC2_CLUSTERS || cpu >= TC2_MAX_CPUS_PER_CLUSTER); + + for (tries = 0; tries < TIMEOUT_MSEC / POLL_MSEC; ++tries) { + /* + * Only examine the hardware state if the target CPU has + * caught up at least as far as tc2_pm_down(): + */ + if (ACCESS_ONCE(tc2_pm_use_count[cpu][cluster]) == 0) { + pr_debug("%s(cpu=%u, cluster=%u): RESET_CTRL = 0x%08X\n", + __func__, cpu, cluster, + readl_relaxed(scc + RESET_CTRL)); + + /* + * We need the CPU to reach WFI, but the power + * controller may put the cluster in reset and + * power it off as soon as that happens, before + * we have a chance to see STANDBYWFI. + * + * So we need to check for both conditions: + */ + if (tc2_core_in_reset(cpu, cluster) || + ve_spc_cpu_in_wfi(cpu, cluster)) + return 0; /* success: the CPU is halted */ + } + + /* Otherwise, wait and retry: */ + msleep(POLL_MSEC); + } + + return -ETIMEDOUT; /* timeout */ +} + static void tc2_pm_suspend(u64 residency) { unsigned int mpidr, cpu, cluster; @@ -232,10 +288,11 @@ static void tc2_pm_powered_up(void) } static const struct mcpm_platform_ops tc2_pm_power_ops = { - .power_up = tc2_pm_power_up, - .power_down = tc2_pm_power_down, - .suspend = tc2_pm_suspend, - .powered_up = tc2_pm_powered_up, + .power_up = tc2_pm_power_up, + .power_down = tc2_pm_power_down, + .power_down_finish = tc2_pm_power_down_finish, + .suspend = tc2_pm_suspend, + .powered_up = tc2_pm_powered_up, }; static bool __init tc2_pm_usage_count_init(void) @@ -269,7 +326,6 @@ static void __naked tc2_pm_power_up_setup(unsigned int affinity_level) static int __init tc2_pm_init(void) { int ret, irq; - void __iomem *scc; u32 a15_cluster_id, a7_cluster_id, sys_info; struct device_node *np; diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index 99a3590f034..ac07e871f6a 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -1468,6 +1468,8 @@ void __init s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi0_cfg_gpio; #if defined(CONFIG_PL330_DMA) pd.filter = pl330_filter; +#elif defined(CONFIG_S3C64XX_PL080) + pd.filter = pl08x_filter_id; #elif defined(CONFIG_S3C24XX_DMAC) pd.filter = s3c24xx_dma_filter; #endif @@ -1509,8 +1511,10 @@ void __init s3c64xx_spi1_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, pd.num_cs = num_cs; pd.src_clk_nr = src_clk_nr; pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi1_cfg_gpio; -#ifdef CONFIG_PL330_DMA +#if defined(CONFIG_PL330_DMA) pd.filter = pl330_filter; +#elif defined(CONFIG_S3C64XX_PL080) + pd.filter = pl08x_filter_id; #endif s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi1); @@ -1550,8 +1554,10 @@ void __init s3c64xx_spi2_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, pd.num_cs = num_cs; pd.src_clk_nr = src_clk_nr; pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi2_cfg_gpio; -#ifdef CONFIG_PL330_DMA +#if defined(CONFIG_PL330_DMA) pd.filter = pl330_filter; +#elif defined(CONFIG_S3C64XX_PL080) + pd.filter = pl08x_filter_id; #endif s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi2); diff --git a/arch/arm/plat-samsung/dma-ops.c b/arch/arm/plat-samsung/dma-ops.c index ec0d731b0e7..886326ee6f6 100644 --- a/arch/arm/plat-samsung/dma-ops.c +++ b/arch/arm/plat-samsung/dma-ops.c @@ -18,6 +18,12 @@ #include <mach/dma.h> +#if defined(CONFIG_PL330_DMA) +#define dma_filter pl330_filter +#elif defined(CONFIG_S3C64XX_PL080) +#define dma_filter pl08x_filter_id +#endif + static unsigned samsung_dmadev_request(enum dma_ch dma_ch, struct samsung_dma_req *param, struct device *dev, char *ch_name) @@ -30,7 +36,7 @@ static unsigned samsung_dmadev_request(enum dma_ch dma_ch, if (dev->of_node) return (unsigned)dma_request_slave_channel(dev, ch_name); else - return (unsigned)dma_request_channel(mask, pl330_filter, + return (unsigned)dma_request_channel(mask, dma_filter, (void *)dma_ch); } diff --git a/arch/arm64/boot/dts/foundation-v8.dts b/arch/arm64/boot/dts/foundation-v8.dts index 84fcc501828..519c4b2c068 100644 --- a/arch/arm64/boot/dts/foundation-v8.dts +++ b/arch/arm64/boot/dts/foundation-v8.dts @@ -6,6 +6,8 @@ /dts-v1/; +/memreserve/ 0x80000000 0x00010000; + / { model = "Foundation-v8A"; compatible = "arm,foundation-aarch64", "arm,vexpress"; diff --git a/arch/arm64/include/asm/irqflags.h b/arch/arm64/include/asm/irqflags.h index aa11943b850..b2fcfbc51ec 100644 --- a/arch/arm64/include/asm/irqflags.h +++ b/arch/arm64/include/asm/irqflags.h @@ -56,6 +56,9 @@ static inline void arch_local_irq_disable(void) #define local_fiq_enable() asm("msr daifclr, #1" : : : "memory") #define local_fiq_disable() asm("msr daifset, #1" : : : "memory") +#define local_async_enable() asm("msr daifclr, #4" : : : "memory") +#define local_async_disable() asm("msr daifset, #4" : : : "memory") + /* * Save the current interrupt enable state. */ diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h index 17bd3af0a11..7f2b60affbb 100644 --- a/arch/arm64/include/asm/pgtable.h +++ b/arch/arm64/include/asm/pgtable.h @@ -25,10 +25,11 @@ * Software defined PTE bits definition. */ #define PTE_VALID (_AT(pteval_t, 1) << 0) -#define PTE_PROT_NONE (_AT(pteval_t, 1) << 2) /* only when !PTE_VALID */ -#define PTE_FILE (_AT(pteval_t, 1) << 3) /* only when !pte_present() */ +#define PTE_FILE (_AT(pteval_t, 1) << 2) /* only when !pte_present() */ #define PTE_DIRTY (_AT(pteval_t, 1) << 55) #define PTE_SPECIAL (_AT(pteval_t, 1) << 56) + /* bit 57 for PMD_SECT_SPLITTING */ +#define PTE_PROT_NONE (_AT(pteval_t, 1) << 58) /* only when !PTE_VALID */ /* * VMALLOC and SPARSEMEM_VMEMMAP ranges. @@ -254,7 +255,7 @@ static inline int has_transparent_hugepage(void) #define pgprot_noncached(prot) \ __pgprot_modify(prot, PTE_ATTRINDX_MASK, PTE_ATTRINDX(MT_DEVICE_nGnRnE)) #define pgprot_writecombine(prot) \ - __pgprot_modify(prot, PTE_ATTRINDX_MASK, PTE_ATTRINDX(MT_DEVICE_GRE)) + __pgprot_modify(prot, PTE_ATTRINDX_MASK, PTE_ATTRINDX(MT_NORMAL_NC)) #define pgprot_dmacoherent(prot) \ __pgprot_modify(prot, PTE_ATTRINDX_MASK, PTE_ATTRINDX(MT_NORMAL_NC)) #define __HAVE_PHYS_MEM_ACCESS_PROT @@ -357,18 +358,20 @@ extern pgd_t idmap_pg_dir[PTRS_PER_PGD]; /* * Encode and decode a swap entry: - * bits 0, 2: present (must both be zero) - * bit 3: PTE_FILE - * bits 4-8: swap type - * bits 9-63: swap offset + * bits 0-1: present (must be zero) + * bit 2: PTE_FILE + * bits 3-8: swap type + * bits 9-57: swap offset */ -#define __SWP_TYPE_SHIFT 4 +#define __SWP_TYPE_SHIFT 3 #define __SWP_TYPE_BITS 6 +#define __SWP_OFFSET_BITS 49 #define __SWP_TYPE_MASK ((1 << __SWP_TYPE_BITS) - 1) #define __SWP_OFFSET_SHIFT (__SWP_TYPE_BITS + __SWP_TYPE_SHIFT) +#define __SWP_OFFSET_MASK ((1UL << __SWP_OFFSET_BITS) - 1) #define __swp_type(x) (((x).val >> __SWP_TYPE_SHIFT) & __SWP_TYPE_MASK) -#define __swp_offset(x) ((x).val >> __SWP_OFFSET_SHIFT) +#define __swp_offset(x) (((x).val >> __SWP_OFFSET_SHIFT) & __SWP_OFFSET_MASK) #define __swp_entry(type,offset) ((swp_entry_t) { ((type) << __SWP_TYPE_SHIFT) | ((offset) << __SWP_OFFSET_SHIFT) }) #define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) @@ -382,15 +385,15 @@ extern pgd_t idmap_pg_dir[PTRS_PER_PGD]; /* * Encode and decode a file entry: - * bits 0, 2: present (must both be zero) - * bit 3: PTE_FILE - * bits 4-63: file offset / PAGE_SIZE + * bits 0-1: present (must be zero) + * bit 2: PTE_FILE + * bits 3-57: file offset / PAGE_SIZE */ #define pte_file(pte) (pte_val(pte) & PTE_FILE) -#define pte_to_pgoff(x) (pte_val(x) >> 4) -#define pgoff_to_pte(x) __pte(((x) << 4) | PTE_FILE) +#define pte_to_pgoff(x) (pte_val(x) >> 3) +#define pgoff_to_pte(x) __pte(((x) << 3) | PTE_FILE) -#define PTE_FILE_MAX_BITS 60 +#define PTE_FILE_MAX_BITS 55 extern int kern_addr_valid(unsigned long addr); diff --git a/arch/arm64/kernel/debug-monitors.c b/arch/arm64/kernel/debug-monitors.c index 6a0a9b132d7..4ae68579031 100644 --- a/arch/arm64/kernel/debug-monitors.c +++ b/arch/arm64/kernel/debug-monitors.c @@ -248,7 +248,8 @@ static int brk_handler(unsigned long addr, unsigned int esr, int aarch32_break_handler(struct pt_regs *regs) { siginfo_t info; - unsigned int instr; + u32 arm_instr; + u16 thumb_instr; bool bp = false; void __user *pc = (void __user *)instruction_pointer(regs); @@ -257,18 +258,21 @@ int aarch32_break_handler(struct pt_regs *regs) if (compat_thumb_mode(regs)) { /* get 16-bit Thumb instruction */ - get_user(instr, (u16 __user *)pc); - if (instr == AARCH32_BREAK_THUMB2_LO) { + get_user(thumb_instr, (u16 __user *)pc); + thumb_instr = le16_to_cpu(thumb_instr); + if (thumb_instr == AARCH32_BREAK_THUMB2_LO) { /* get second half of 32-bit Thumb-2 instruction */ - get_user(instr, (u16 __user *)(pc + 2)); - bp = instr == AARCH32_BREAK_THUMB2_HI; + get_user(thumb_instr, (u16 __user *)(pc + 2)); + thumb_instr = le16_to_cpu(thumb_instr); + bp = thumb_instr == AARCH32_BREAK_THUMB2_HI; } else { - bp = instr == AARCH32_BREAK_THUMB; + bp = thumb_instr == AARCH32_BREAK_THUMB; } } else { /* 32-bit ARM instruction */ - get_user(instr, (u32 __user *)pc); - bp = (instr & ~0xf0000000) == AARCH32_BREAK_ARM; + get_user(arm_instr, (u32 __user *)pc); + arm_instr = le32_to_cpu(arm_instr); + bp = (arm_instr & ~0xf0000000) == AARCH32_BREAK_ARM; } if (!bp) diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S index e1166145ca2..4d2c6f3f0c4 100644 --- a/arch/arm64/kernel/entry.S +++ b/arch/arm64/kernel/entry.S @@ -309,15 +309,12 @@ el1_irq: #ifdef CONFIG_TRACE_IRQFLAGS bl trace_hardirqs_off #endif -#ifdef CONFIG_PREEMPT - get_thread_info tsk - ldr w24, [tsk, #TI_PREEMPT] // get preempt count - add w0, w24, #1 // increment it - str w0, [tsk, #TI_PREEMPT] -#endif + irq_handler + #ifdef CONFIG_PREEMPT - str w24, [tsk, #TI_PREEMPT] // restore preempt count + get_thread_info tsk + ldr w24, [tsk, #TI_PREEMPT] // restore preempt count cbnz w24, 1f // preempt count != 0 ldr x0, [tsk, #TI_FLAGS] // get flags tbz x0, #TIF_NEED_RESCHED, 1f // needs rescheduling? @@ -507,22 +504,10 @@ el0_irq_naked: #ifdef CONFIG_TRACE_IRQFLAGS bl trace_hardirqs_off #endif - get_thread_info tsk -#ifdef CONFIG_PREEMPT - ldr w24, [tsk, #TI_PREEMPT] // get preempt count - add w23, w24, #1 // increment it - str w23, [tsk, #TI_PREEMPT] -#endif + irq_handler -#ifdef CONFIG_PREEMPT - ldr w0, [tsk, #TI_PREEMPT] - str w24, [tsk, #TI_PREEMPT] - cmp w0, w23 - b.eq 1f - mov x1, #0 - str x1, [x1] // BUG -1: -#endif + get_thread_info tsk + #ifdef CONFIG_TRACE_IRQFLAGS bl trace_hardirqs_on #endif diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c index fecdbf7de82..6777a2192b8 100644 --- a/arch/arm64/kernel/ptrace.c +++ b/arch/arm64/kernel/ptrace.c @@ -636,28 +636,27 @@ static int compat_gpr_get(struct task_struct *target, for (i = 0; i < num_regs; ++i) { unsigned int idx = start + i; - void *reg; + compat_ulong_t reg; switch (idx) { case 15: - reg = (void *)&task_pt_regs(target)->pc; + reg = task_pt_regs(target)->pc; break; case 16: - reg = (void *)&task_pt_regs(target)->pstate; + reg = task_pt_regs(target)->pstate; break; case 17: - reg = (void *)&task_pt_regs(target)->orig_x0; + reg = task_pt_regs(target)->orig_x0; break; default: - reg = (void *)&task_pt_regs(target)->regs[idx]; + reg = task_pt_regs(target)->regs[idx]; } - ret = copy_to_user(ubuf, reg, sizeof(compat_ulong_t)); - + ret = copy_to_user(ubuf, ®, sizeof(reg)); if (ret) break; - else - ubuf += sizeof(compat_ulong_t); + + ubuf += sizeof(reg); } return ret; @@ -685,28 +684,28 @@ static int compat_gpr_set(struct task_struct *target, for (i = 0; i < num_regs; ++i) { unsigned int idx = start + i; - void *reg; + compat_ulong_t reg; + + ret = copy_from_user(®, ubuf, sizeof(reg)); + if (ret) + return ret; + + ubuf += sizeof(reg); switch (idx) { case 15: - reg = (void *)&newregs.pc; + newregs.pc = reg; break; case 16: - reg = (void *)&newregs.pstate; + newregs.pstate = reg; break; case 17: - reg = (void *)&newregs.orig_x0; + newregs.orig_x0 = reg; break; default: - reg = (void *)&newregs.regs[idx]; + newregs.regs[idx] = reg; } - ret = copy_from_user(reg, ubuf, sizeof(compat_ulong_t)); - - if (ret) - goto out; - else - ubuf += sizeof(compat_ulong_t); } if (valid_user_regs(&newregs.user_regs)) @@ -714,7 +713,6 @@ static int compat_gpr_set(struct task_struct *target, else ret = -EINVAL; -out: return ret; } diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c index 0bc5e4cbc01..bd9bbd0e44e 100644 --- a/arch/arm64/kernel/setup.c +++ b/arch/arm64/kernel/setup.c @@ -205,6 +205,11 @@ u64 __cpu_logical_map[NR_CPUS] = { [0 ... NR_CPUS-1] = INVALID_HWID }; void __init setup_arch(char **cmdline_p) { + /* + * Unmask asynchronous aborts early to catch possible system errors. + */ + local_async_enable(); + setup_processor(); setup_machine_fdt(__fdt_pointer); diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c index a5aeefab03c..a0c2ca602cf 100644 --- a/arch/arm64/kernel/smp.c +++ b/arch/arm64/kernel/smp.c @@ -160,6 +160,7 @@ asmlinkage void secondary_start_kernel(void) local_irq_enable(); local_fiq_enable(); + local_async_enable(); /* * OK, it's off to the idle thread for us diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index 8a2463670a5..0f4344e6fbc 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -75,8 +75,10 @@ LDEMULATION := lppc GNUTARGET := powerpcle MULTIPLEWORD := -mno-multiple else +ifeq ($(call cc-option-yn,-mbig-endian),y) override CC += -mbig-endian override AS += -mbig-endian +endif override LD += -EB LDEMULATION := ppc GNUTARGET := powerpc @@ -128,7 +130,12 @@ CFLAGS-$(CONFIG_POWER5_CPU) += $(call cc-option,-mcpu=power5) CFLAGS-$(CONFIG_POWER6_CPU) += $(call cc-option,-mcpu=power6) CFLAGS-$(CONFIG_POWER7_CPU) += $(call cc-option,-mcpu=power7) +# Altivec option not allowed with e500mc64 in GCC. +ifeq ($(CONFIG_ALTIVEC),y) +E5500_CPU := -mcpu=powerpc64 +else E5500_CPU := $(call cc-option,-mcpu=e500mc64,-mcpu=powerpc64) +endif CFLAGS-$(CONFIG_E5500_CPU) += $(E5500_CPU) CFLAGS-$(CONFIG_E6500_CPU) += $(call cc-option,-mcpu=e6500,$(E5500_CPU)) diff --git a/arch/powerpc/boot/dts/xcalibur1501.dts b/arch/powerpc/boot/dts/xcalibur1501.dts index cc00f4ddd9a..c409cbafb12 100644 --- a/arch/powerpc/boot/dts/xcalibur1501.dts +++ b/arch/powerpc/boot/dts/xcalibur1501.dts @@ -637,14 +637,14 @@ tlu@2f000 { compatible = "fsl,mpc8572-tlu", "fsl_tlu"; reg = <0x2f000 0x1000>; - interupts = <61 2 >; + interrupts = <61 2>; interrupt-parent = <&mpic>; }; tlu@15000 { compatible = "fsl,mpc8572-tlu", "fsl_tlu"; reg = <0x15000 0x1000>; - interupts = <75 2>; + interrupts = <75 2>; interrupt-parent = <&mpic>; }; }; diff --git a/arch/powerpc/boot/dts/xpedite5301.dts b/arch/powerpc/boot/dts/xpedite5301.dts index 53c1c6a9752..04cb410da48 100644 --- a/arch/powerpc/boot/dts/xpedite5301.dts +++ b/arch/powerpc/boot/dts/xpedite5301.dts @@ -547,14 +547,14 @@ tlu@2f000 { compatible = "fsl,mpc8572-tlu", "fsl_tlu"; reg = <0x2f000 0x1000>; - interupts = <61 2 >; + interrupts = <61 2>; interrupt-parent = <&mpic>; }; tlu@15000 { compatible = "fsl,mpc8572-tlu", "fsl_tlu"; reg = <0x15000 0x1000>; - interupts = <75 2>; + interrupts = <75 2>; interrupt-parent = <&mpic>; }; }; diff --git a/arch/powerpc/boot/dts/xpedite5330.dts b/arch/powerpc/boot/dts/xpedite5330.dts index 21522598315..73f8620f1ce 100644 --- a/arch/powerpc/boot/dts/xpedite5330.dts +++ b/arch/powerpc/boot/dts/xpedite5330.dts @@ -583,14 +583,14 @@ tlu@2f000 { compatible = "fsl,mpc8572-tlu", "fsl_tlu"; reg = <0x2f000 0x1000>; - interupts = <61 2 >; + interrupts = <61 2>; interrupt-parent = <&mpic>; }; tlu@15000 { compatible = "fsl,mpc8572-tlu", "fsl_tlu"; reg = <0x15000 0x1000>; - interupts = <75 2>; + interrupts = <75 2>; interrupt-parent = <&mpic>; }; }; diff --git a/arch/powerpc/boot/dts/xpedite5370.dts b/arch/powerpc/boot/dts/xpedite5370.dts index 11dbda10d75..cd0ea2b9936 100644 --- a/arch/powerpc/boot/dts/xpedite5370.dts +++ b/arch/powerpc/boot/dts/xpedite5370.dts @@ -545,14 +545,14 @@ tlu@2f000 { compatible = "fsl,mpc8572-tlu", "fsl_tlu"; reg = <0x2f000 0x1000>; - interupts = <61 2 >; + interrupts = <61 2>; interrupt-parent = <&mpic>; }; tlu@15000 { compatible = "fsl,mpc8572-tlu", "fsl_tlu"; reg = <0x15000 0x1000>; - interupts = <75 2>; + interrupts = <75 2>; interrupt-parent = <&mpic>; }; }; diff --git a/arch/powerpc/boot/util.S b/arch/powerpc/boot/util.S index 5143228e3e5..6636b1d7821 100644 --- a/arch/powerpc/boot/util.S +++ b/arch/powerpc/boot/util.S @@ -71,18 +71,32 @@ udelay: add r4,r4,r5 addi r4,r4,-1 divw r4,r4,r5 /* BUS ticks */ +#ifdef CONFIG_8xx +1: mftbu r5 + mftb r6 + mftbu r7 +#else 1: mfspr r5, SPRN_TBRU mfspr r6, SPRN_TBRL mfspr r7, SPRN_TBRU +#endif cmpw 0,r5,r7 bne 1b /* Get [synced] base time */ addc r9,r6,r4 /* Compute end time */ addze r8,r5 +#ifdef CONFIG_8xx +2: mftbu r5 +#else 2: mfspr r5, SPRN_TBRU +#endif cmpw 0,r5,r8 blt 2b bgt 3f +#ifdef CONFIG_8xx + mftb r6 +#else mfspr r6, SPRN_TBRL +#endif cmpw 0,r6,r9 blt 2b 3: blr diff --git a/arch/powerpc/include/asm/pgalloc-64.h b/arch/powerpc/include/asm/pgalloc-64.h index 16cb92d215d..694012877bf 100644 --- a/arch/powerpc/include/asm/pgalloc-64.h +++ b/arch/powerpc/include/asm/pgalloc-64.h @@ -16,6 +16,7 @@ struct vmemmap_backing { unsigned long phys; unsigned long virt_addr; }; +extern struct vmemmap_backing *vmemmap_list; /* * Functions that deal with pagetables that could be at any level of diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h index 3c1acc31a09..f595b98079e 100644 --- a/arch/powerpc/include/asm/ppc_asm.h +++ b/arch/powerpc/include/asm/ppc_asm.h @@ -366,6 +366,8 @@ BEGIN_FTR_SECTION_NESTED(96); \ cmpwi dest,0; \ beq- 90b; \ END_FTR_SECTION_NESTED(CPU_FTR_CELL_TB_BUG, CPU_FTR_CELL_TB_BUG, 96) +#elif defined(CONFIG_8xx) +#define MFTB(dest) mftb dest #else #define MFTB(dest) mfspr dest, SPRN_TBRL #endif diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h index 5c45787d551..fa8388ed94c 100644 --- a/arch/powerpc/include/asm/reg.h +++ b/arch/powerpc/include/asm/reg.h @@ -1174,12 +1174,19 @@ #else /* __powerpc64__ */ +#if defined(CONFIG_8xx) +#define mftbl() ({unsigned long rval; \ + asm volatile("mftbl %0" : "=r" (rval)); rval;}) +#define mftbu() ({unsigned long rval; \ + asm volatile("mftbu %0" : "=r" (rval)); rval;}) +#else #define mftbl() ({unsigned long rval; \ asm volatile("mfspr %0, %1" : "=r" (rval) : \ "i" (SPRN_TBRL)); rval;}) #define mftbu() ({unsigned long rval; \ asm volatile("mfspr %0, %1" : "=r" (rval) : \ "i" (SPRN_TBRU)); rval;}) +#endif #endif /* !__powerpc64__ */ #define mttbl(v) asm volatile("mttbl %0":: "r"(v)) diff --git a/arch/powerpc/include/asm/timex.h b/arch/powerpc/include/asm/timex.h index 18908caa1f3..2cf846edb3f 100644 --- a/arch/powerpc/include/asm/timex.h +++ b/arch/powerpc/include/asm/timex.h @@ -29,7 +29,11 @@ static inline cycles_t get_cycles(void) ret = 0; __asm__ __volatile__( +#ifdef CONFIG_8xx + "97: mftb %0\n" +#else "97: mfspr %0, %2\n" +#endif "99:\n" ".section __ftr_fixup,\"a\"\n" ".align 2\n" @@ -41,7 +45,11 @@ static inline cycles_t get_cycles(void) " .long 0\n" " .long 0\n" ".previous" +#ifdef CONFIG_8xx + : "=r" (ret) : "i" (CPU_FTR_601)); +#else : "=r" (ret) : "i" (CPU_FTR_601), "i" (SPRN_TBRL)); +#endif return ret; #endif } diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c index e1ec57e87b3..88a7fb458df 100644 --- a/arch/powerpc/kernel/machine_kexec.c +++ b/arch/powerpc/kernel/machine_kexec.c @@ -18,6 +18,7 @@ #include <linux/ftrace.h> #include <asm/machdep.h> +#include <asm/pgalloc.h> #include <asm/prom.h> #include <asm/sections.h> @@ -75,6 +76,17 @@ void arch_crash_save_vmcoreinfo(void) #ifndef CONFIG_NEED_MULTIPLE_NODES VMCOREINFO_SYMBOL(contig_page_data); #endif +#if defined(CONFIG_PPC64) && defined(CONFIG_SPARSEMEM_VMEMMAP) + VMCOREINFO_SYMBOL(vmemmap_list); + VMCOREINFO_SYMBOL(mmu_vmemmap_psize); + VMCOREINFO_SYMBOL(mmu_psize_defs); + VMCOREINFO_STRUCT_SIZE(vmemmap_backing); + VMCOREINFO_OFFSET(vmemmap_backing, list); + VMCOREINFO_OFFSET(vmemmap_backing, phys); + VMCOREINFO_OFFSET(vmemmap_backing, virt_addr); + VMCOREINFO_STRUCT_SIZE(mmu_psize_def); + VMCOREINFO_OFFSET(mmu_psize_def, shift); +#endif } /* diff --git a/arch/powerpc/kernel/nvram_64.c b/arch/powerpc/kernel/nvram_64.c index fd82c289ab1..28b898e6818 100644 --- a/arch/powerpc/kernel/nvram_64.c +++ b/arch/powerpc/kernel/nvram_64.c @@ -210,7 +210,7 @@ static void __init nvram_print_partitions(char * label) printk(KERN_WARNING "--------%s---------\n", label); printk(KERN_WARNING "indx\t\tsig\tchks\tlen\tname\n"); list_for_each_entry(tmp_part, &nvram_partitions, partition) { - printk(KERN_WARNING "%4d \t%02x\t%02x\t%d\t%12s\n", + printk(KERN_WARNING "%4d \t%02x\t%02x\t%d\t%12.12s\n", tmp_part->index, tmp_part->header.signature, tmp_part->header.checksum, tmp_part->header.length, tmp_part->header.name); diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c index 1844298f5ea..68027bfa5f8 100644 --- a/arch/powerpc/kernel/signal_32.c +++ b/arch/powerpc/kernel/signal_32.c @@ -445,6 +445,12 @@ static int save_user_regs(struct pt_regs *regs, struct mcontext __user *frame, #endif /* CONFIG_ALTIVEC */ if (copy_fpr_to_user(&frame->mc_fregs, current)) return 1; + + /* + * Clear the MSR VSX bit to indicate there is no valid state attached + * to this context, except in the specific case below where we set it. + */ + msr &= ~MSR_VSX; #ifdef CONFIG_VSX /* * Copy VSR 0-31 upper half from thread_struct to local @@ -457,15 +463,7 @@ static int save_user_regs(struct pt_regs *regs, struct mcontext __user *frame, if (copy_vsx_to_user(&frame->mc_vsregs, current)) return 1; msr |= MSR_VSX; - } else if (!ctx_has_vsx_region) - /* - * With a small context structure we can't hold the VSX - * registers, hence clear the MSR value to indicate the state - * was not saved. - */ - msr &= ~MSR_VSX; - - + } #endif /* CONFIG_VSX */ #ifdef CONFIG_SPE /* save spe registers */ diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c index e66f67b8b9e..42991045349 100644 --- a/arch/powerpc/kernel/signal_64.c +++ b/arch/powerpc/kernel/signal_64.c @@ -122,6 +122,12 @@ static long setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, flush_fp_to_thread(current); /* copy fpr regs and fpscr */ err |= copy_fpr_to_user(&sc->fp_regs, current); + + /* + * Clear the MSR VSX bit to indicate there is no valid state attached + * to this context, except in the specific case below where we set it. + */ + msr &= ~MSR_VSX; #ifdef CONFIG_VSX /* * Copy VSX low doubleword to local buffer for formatting, diff --git a/arch/powerpc/kernel/vdso32/gettimeofday.S b/arch/powerpc/kernel/vdso32/gettimeofday.S index 6b1f2a6d551..6b2b69616e7 100644 --- a/arch/powerpc/kernel/vdso32/gettimeofday.S +++ b/arch/powerpc/kernel/vdso32/gettimeofday.S @@ -232,9 +232,15 @@ __do_get_tspec: lwz r6,(CFG_TB_ORIG_STAMP+4)(r9) /* Get a stable TB value */ +#ifdef CONFIG_8xx +2: mftbu r3 + mftbl r4 + mftbu r0 +#else 2: mfspr r3, SPRN_TBRU mfspr r4, SPRN_TBRL mfspr r0, SPRN_TBRU +#endif cmplw cr0,r3,r0 bne- 2b diff --git a/arch/powerpc/mm/hugetlbpage-book3e.c b/arch/powerpc/mm/hugetlbpage-book3e.c index 3bc700655fc..74551b5e41e 100644 --- a/arch/powerpc/mm/hugetlbpage-book3e.c +++ b/arch/powerpc/mm/hugetlbpage-book3e.c @@ -117,6 +117,5 @@ void flush_hugetlb_page(struct vm_area_struct *vma, unsigned long vmaddr) struct hstate *hstate = hstate_file(vma->vm_file); unsigned long tsize = huge_page_shift(hstate) - 10; - __flush_tlb_page(vma ? vma->vm_mm : NULL, vmaddr, tsize, 0); - + __flush_tlb_page(vma->vm_mm, vmaddr, tsize, 0); } diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c index 41cd68dee68..358d7430313 100644 --- a/arch/powerpc/mm/tlb_nohash.c +++ b/arch/powerpc/mm/tlb_nohash.c @@ -305,7 +305,7 @@ void __flush_tlb_page(struct mm_struct *mm, unsigned long vmaddr, void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr) { #ifdef CONFIG_HUGETLB_PAGE - if (is_vm_hugetlb_page(vma)) + if (vma && is_vm_hugetlb_page(vma)) flush_hugetlb_page(vma, vmaddr); #endif diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype index 132f8726a25..bca2465a9c3 100644 --- a/arch/powerpc/platforms/Kconfig.cputype +++ b/arch/powerpc/platforms/Kconfig.cputype @@ -404,13 +404,27 @@ config PPC_DOORBELL endmenu -config CPU_LITTLE_ENDIAN - bool "Build little endian kernel" - default n +choice + prompt "Endianness selection" + default CPU_BIG_ENDIAN help This option selects whether a big endian or little endian kernel will be built. +config CPU_BIG_ENDIAN + bool "Build big endian kernel" + help + Build a big endian kernel. + + If unsure, select this option. + +config CPU_LITTLE_ENDIAN + bool "Build little endian kernel" + help + Build a little endian kernel. + Note that if cross compiling a little endian kernel, CROSS_COMPILE must point to a toolchain capable of targeting little endian powerpc. + +endchoice diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index 314fced4fc1..5877e71901b 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -101,7 +101,7 @@ config S390 select GENERIC_CPU_DEVICES if !SMP select GENERIC_FIND_FIRST_BIT select GENERIC_SMP_IDLE_THREAD - select GENERIC_TIME_VSYSCALL_OLD + select GENERIC_TIME_VSYSCALL select HAVE_ALIGNED_STRUCT_PAGE if SLUB select HAVE_ARCH_JUMP_LABEL if !MARCH_G5 select HAVE_ARCH_SECCOMP_FILTER diff --git a/arch/s390/crypto/aes_s390.c b/arch/s390/crypto/aes_s390.c index 46cae138ece..4363528dc8f 100644 --- a/arch/s390/crypto/aes_s390.c +++ b/arch/s390/crypto/aes_s390.c @@ -35,7 +35,6 @@ static u8 *ctrblk; static char keylen_flag; struct s390_aes_ctx { - u8 iv[AES_BLOCK_SIZE]; u8 key[AES_MAX_KEY_SIZE]; long enc; long dec; @@ -441,30 +440,36 @@ static int cbc_aes_set_key(struct crypto_tfm *tfm, const u8 *in_key, return aes_set_key(tfm, in_key, key_len); } -static int cbc_aes_crypt(struct blkcipher_desc *desc, long func, void *param, +static int cbc_aes_crypt(struct blkcipher_desc *desc, long func, struct blkcipher_walk *walk) { + struct s390_aes_ctx *sctx = crypto_blkcipher_ctx(desc->tfm); int ret = blkcipher_walk_virt(desc, walk); unsigned int nbytes = walk->nbytes; + struct { + u8 iv[AES_BLOCK_SIZE]; + u8 key[AES_MAX_KEY_SIZE]; + } param; if (!nbytes) goto out; - memcpy(param, walk->iv, AES_BLOCK_SIZE); + memcpy(param.iv, walk->iv, AES_BLOCK_SIZE); + memcpy(param.key, sctx->key, sctx->key_len); do { /* only use complete blocks */ unsigned int n = nbytes & ~(AES_BLOCK_SIZE - 1); u8 *out = walk->dst.virt.addr; u8 *in = walk->src.virt.addr; - ret = crypt_s390_kmc(func, param, out, in, n); + ret = crypt_s390_kmc(func, ¶m, out, in, n); if (ret < 0 || ret != n) return -EIO; nbytes &= AES_BLOCK_SIZE - 1; ret = blkcipher_walk_done(desc, walk, nbytes); } while ((nbytes = walk->nbytes)); - memcpy(walk->iv, param, AES_BLOCK_SIZE); + memcpy(walk->iv, param.iv, AES_BLOCK_SIZE); out: return ret; @@ -481,7 +486,7 @@ static int cbc_aes_encrypt(struct blkcipher_desc *desc, return fallback_blk_enc(desc, dst, src, nbytes); blkcipher_walk_init(&walk, dst, src, nbytes); - return cbc_aes_crypt(desc, sctx->enc, sctx->iv, &walk); + return cbc_aes_crypt(desc, sctx->enc, &walk); } static int cbc_aes_decrypt(struct blkcipher_desc *desc, @@ -495,7 +500,7 @@ static int cbc_aes_decrypt(struct blkcipher_desc *desc, return fallback_blk_dec(desc, dst, src, nbytes); blkcipher_walk_init(&walk, dst, src, nbytes); - return cbc_aes_crypt(desc, sctx->dec, sctx->iv, &walk); + return cbc_aes_crypt(desc, sctx->dec, &walk); } static struct crypto_alg cbc_aes_alg = { diff --git a/arch/s390/include/asm/page.h b/arch/s390/include/asm/page.h index 316c8503a3b..114258eeaac 100644 --- a/arch/s390/include/asm/page.h +++ b/arch/s390/include/asm/page.h @@ -48,33 +48,21 @@ static inline void clear_page(void *page) : "memory", "cc"); } +/* + * copy_page uses the mvcl instruction with 0xb0 padding byte in order to + * bypass caches when copying a page. Especially when copying huge pages + * this keeps L1 and L2 data caches alive. + */ static inline void copy_page(void *to, void *from) { - if (MACHINE_HAS_MVPG) { - register unsigned long reg0 asm ("0") = 0; - asm volatile( - " mvpg %0,%1" - : : "a" (to), "a" (from), "d" (reg0) - : "memory", "cc"); - } else - asm volatile( - " mvc 0(256,%0),0(%1)\n" - " mvc 256(256,%0),256(%1)\n" - " mvc 512(256,%0),512(%1)\n" - " mvc 768(256,%0),768(%1)\n" - " mvc 1024(256,%0),1024(%1)\n" - " mvc 1280(256,%0),1280(%1)\n" - " mvc 1536(256,%0),1536(%1)\n" - " mvc 1792(256,%0),1792(%1)\n" - " mvc 2048(256,%0),2048(%1)\n" - " mvc 2304(256,%0),2304(%1)\n" - " mvc 2560(256,%0),2560(%1)\n" - " mvc 2816(256,%0),2816(%1)\n" - " mvc 3072(256,%0),3072(%1)\n" - " mvc 3328(256,%0),3328(%1)\n" - " mvc 3584(256,%0),3584(%1)\n" - " mvc 3840(256,%0),3840(%1)\n" - : : "a" (to), "a" (from) : "memory"); + register void *reg2 asm ("2") = to; + register unsigned long reg3 asm ("3") = 0x1000; + register void *reg4 asm ("4") = from; + register unsigned long reg5 asm ("5") = 0xb0001000; + asm volatile( + " mvcl 2,4" + : "+d" (reg2), "+d" (reg3), "+d" (reg4), "+d" (reg5) + : : "memory", "cc"); } #define clear_user_page(page, vaddr, pg) clear_page(page) diff --git a/arch/s390/include/asm/vdso.h b/arch/s390/include/asm/vdso.h index a73eb2e1e91..bc9746a7d47 100644 --- a/arch/s390/include/asm/vdso.h +++ b/arch/s390/include/asm/vdso.h @@ -26,8 +26,9 @@ struct vdso_data { __u64 wtom_clock_nsec; /* 0x28 */ __u32 tz_minuteswest; /* Minutes west of Greenwich 0x30 */ __u32 tz_dsttime; /* Type of dst correction 0x34 */ - __u32 ectg_available; - __u32 ntp_mult; /* NTP adjusted multiplier 0x3C */ + __u32 ectg_available; /* ECTG instruction present 0x38 */ + __u32 tk_mult; /* Mult. used for xtime_nsec 0x3c */ + __u32 tk_shift; /* Shift used for xtime_nsec 0x40 */ }; struct vdso_per_cpu_data { diff --git a/arch/s390/kernel/asm-offsets.c b/arch/s390/kernel/asm-offsets.c index 2416138ebd3..496116cd65e 100644 --- a/arch/s390/kernel/asm-offsets.c +++ b/arch/s390/kernel/asm-offsets.c @@ -65,7 +65,8 @@ int main(void) DEFINE(__VDSO_WTOM_NSEC, offsetof(struct vdso_data, wtom_clock_nsec)); DEFINE(__VDSO_TIMEZONE, offsetof(struct vdso_data, tz_minuteswest)); DEFINE(__VDSO_ECTG_OK, offsetof(struct vdso_data, ectg_available)); - DEFINE(__VDSO_NTP_MULT, offsetof(struct vdso_data, ntp_mult)); + DEFINE(__VDSO_TK_MULT, offsetof(struct vdso_data, tk_mult)); + DEFINE(__VDSO_TK_SHIFT, offsetof(struct vdso_data, tk_shift)); DEFINE(__VDSO_ECTG_BASE, offsetof(struct vdso_per_cpu_data, ectg_timer_base)); DEFINE(__VDSO_ECTG_USER, offsetof(struct vdso_per_cpu_data, ectg_user_time)); /* constants used by the vdso */ diff --git a/arch/s390/kernel/compat_signal.c b/arch/s390/kernel/compat_signal.c index 6e244297840..95e7ba0fbb7 100644 --- a/arch/s390/kernel/compat_signal.c +++ b/arch/s390/kernel/compat_signal.c @@ -194,7 +194,7 @@ static int restore_sigregs32(struct pt_regs *regs,_sigregs32 __user *sregs) return -EINVAL; /* Use regs->psw.mask instead of PSW_USER_BITS to preserve PER bit. */ - regs->psw.mask = (regs->psw.mask & ~PSW_MASK_USER) | + regs->psw.mask = (regs->psw.mask & ~(PSW_MASK_USER | PSW_MASK_RI)) | (__u64)(user_sregs.regs.psw.mask & PSW32_MASK_USER) << 32 | (__u64)(user_sregs.regs.psw.mask & PSW32_MASK_RI) << 32 | (__u64)(user_sregs.regs.psw.addr & PSW32_ADDR_AMODE); diff --git a/arch/s390/kernel/pgm_check.S b/arch/s390/kernel/pgm_check.S index 4a460c44e17..813ec726087 100644 --- a/arch/s390/kernel/pgm_check.S +++ b/arch/s390/kernel/pgm_check.S @@ -78,7 +78,7 @@ PGM_CHECK_DEFAULT /* 34 */ PGM_CHECK_DEFAULT /* 35 */ PGM_CHECK_DEFAULT /* 36 */ PGM_CHECK_DEFAULT /* 37 */ -PGM_CHECK_DEFAULT /* 38 */ +PGM_CHECK_64BIT(do_dat_exception) /* 38 */ PGM_CHECK_64BIT(do_dat_exception) /* 39 */ PGM_CHECK_64BIT(do_dat_exception) /* 3a */ PGM_CHECK_64BIT(do_dat_exception) /* 3b */ diff --git a/arch/s390/kernel/signal.c b/arch/s390/kernel/signal.c index fb535874a24..d8fd508ccd1 100644 --- a/arch/s390/kernel/signal.c +++ b/arch/s390/kernel/signal.c @@ -94,7 +94,7 @@ static int restore_sigregs(struct pt_regs *regs, _sigregs __user *sregs) return -EINVAL; /* Use regs->psw.mask instead of PSW_USER_BITS to preserve PER bit. */ - regs->psw.mask = (regs->psw.mask & ~PSW_MASK_USER) | + regs->psw.mask = (regs->psw.mask & ~(PSW_MASK_USER | PSW_MASK_RI)) | (user_sregs.regs.psw.mask & (PSW_MASK_USER | PSW_MASK_RI)); /* Check for invalid user address space control. */ if ((regs->psw.mask & PSW_MASK_ASC) == PSW_ASC_HOME) diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c index 064c3082ab3..dd95f163162 100644 --- a/arch/s390/kernel/time.c +++ b/arch/s390/kernel/time.c @@ -108,20 +108,10 @@ static void fixup_clock_comparator(unsigned long long delta) set_clock_comparator(S390_lowcore.clock_comparator); } -static int s390_next_ktime(ktime_t expires, +static int s390_next_event(unsigned long delta, struct clock_event_device *evt) { - struct timespec ts; - u64 nsecs; - - ts.tv_sec = ts.tv_nsec = 0; - monotonic_to_bootbased(&ts); - nsecs = ktime_to_ns(ktime_add(timespec_to_ktime(ts), expires)); - do_div(nsecs, 125); - S390_lowcore.clock_comparator = sched_clock_base_cc + (nsecs << 9); - /* Program the maximum value if we have an overflow (== year 2042) */ - if (unlikely(S390_lowcore.clock_comparator < sched_clock_base_cc)) - S390_lowcore.clock_comparator = -1ULL; + S390_lowcore.clock_comparator = get_tod_clock() + delta; set_clock_comparator(S390_lowcore.clock_comparator); return 0; } @@ -146,15 +136,14 @@ void init_cpu_timer(void) cpu = smp_processor_id(); cd = &per_cpu(comparators, cpu); cd->name = "comparator"; - cd->features = CLOCK_EVT_FEAT_ONESHOT | - CLOCK_EVT_FEAT_KTIME; + cd->features = CLOCK_EVT_FEAT_ONESHOT; cd->mult = 16777; cd->shift = 12; cd->min_delta_ns = 1; cd->max_delta_ns = LONG_MAX; cd->rating = 400; cd->cpumask = cpumask_of(cpu); - cd->set_next_ktime = s390_next_ktime; + cd->set_next_event = s390_next_event; cd->set_mode = s390_set_mode; clockevents_register_device(cd); @@ -221,21 +210,30 @@ struct clocksource * __init clocksource_default_clock(void) return &clocksource_tod; } -void update_vsyscall_old(struct timespec *wall_time, struct timespec *wtm, - struct clocksource *clock, u32 mult) +void update_vsyscall(struct timekeeper *tk) { - if (clock != &clocksource_tod) + u64 nsecps; + + if (tk->clock != &clocksource_tod) return; /* Make userspace gettimeofday spin until we're done. */ ++vdso_data->tb_update_count; smp_wmb(); - vdso_data->xtime_tod_stamp = clock->cycle_last; - vdso_data->xtime_clock_sec = wall_time->tv_sec; - vdso_data->xtime_clock_nsec = wall_time->tv_nsec; - vdso_data->wtom_clock_sec = wtm->tv_sec; - vdso_data->wtom_clock_nsec = wtm->tv_nsec; - vdso_data->ntp_mult = mult; + vdso_data->xtime_tod_stamp = tk->clock->cycle_last; + vdso_data->xtime_clock_sec = tk->xtime_sec; + vdso_data->xtime_clock_nsec = tk->xtime_nsec; + vdso_data->wtom_clock_sec = + tk->xtime_sec + tk->wall_to_monotonic.tv_sec; + vdso_data->wtom_clock_nsec = tk->xtime_nsec + + + (tk->wall_to_monotonic.tv_nsec << tk->shift); + nsecps = (u64) NSEC_PER_SEC << tk->shift; + while (vdso_data->wtom_clock_nsec >= nsecps) { + vdso_data->wtom_clock_nsec -= nsecps; + vdso_data->wtom_clock_sec++; + } + vdso_data->tk_mult = tk->mult; + vdso_data->tk_shift = tk->shift; smp_wmb(); ++vdso_data->tb_update_count; } diff --git a/arch/s390/kernel/vdso32/clock_gettime.S b/arch/s390/kernel/vdso32/clock_gettime.S index b2224e0b974..5be8e472f57 100644 --- a/arch/s390/kernel/vdso32/clock_gettime.S +++ b/arch/s390/kernel/vdso32/clock_gettime.S @@ -38,25 +38,26 @@ __kernel_clock_gettime: sl %r1,__VDSO_XTIME_STAMP+4(%r5) brc 3,2f ahi %r0,-1 -2: ms %r0,__VDSO_NTP_MULT(%r5) /* cyc2ns(clock,cycle_delta) */ +2: ms %r0,__VDSO_TK_MULT(%r5) /* * tk->mult */ lr %r2,%r0 - l %r0,__VDSO_NTP_MULT(%r5) + l %r0,__VDSO_TK_MULT(%r5) ltr %r1,%r1 mr %r0,%r0 jnm 3f - a %r0,__VDSO_NTP_MULT(%r5) + a %r0,__VDSO_TK_MULT(%r5) 3: alr %r0,%r2 - srdl %r0,12 - al %r0,__VDSO_XTIME_NSEC(%r5) /* + xtime */ + al %r0,__VDSO_XTIME_NSEC(%r5) /* + tk->xtime_nsec */ al %r1,__VDSO_XTIME_NSEC+4(%r5) brc 12,4f ahi %r0,1 -4: l %r2,__VDSO_XTIME_SEC+4(%r5) - al %r0,__VDSO_WTOM_NSEC(%r5) /* + wall_to_monotonic */ +4: al %r0,__VDSO_WTOM_NSEC(%r5) /* + wall_to_monotonic.nsec */ al %r1,__VDSO_WTOM_NSEC+4(%r5) brc 12,5f ahi %r0,1 -5: al %r2,__VDSO_WTOM_SEC+4(%r5) +5: l %r2,__VDSO_TK_SHIFT(%r5) /* Timekeeper shift */ + srdl %r0,0(%r2) /* >> tk->shift */ + l %r2,__VDSO_XTIME_SEC+4(%r5) + al %r2,__VDSO_WTOM_SEC+4(%r5) cl %r4,__VDSO_UPD_COUNT+4(%r5) /* check update counter */ jne 1b basr %r5,0 @@ -86,20 +87,21 @@ __kernel_clock_gettime: sl %r1,__VDSO_XTIME_STAMP+4(%r5) brc 3,12f ahi %r0,-1 -12: ms %r0,__VDSO_NTP_MULT(%r5) /* cyc2ns(clock,cycle_delta) */ +12: ms %r0,__VDSO_TK_MULT(%r5) /* * tk->mult */ lr %r2,%r0 - l %r0,__VDSO_NTP_MULT(%r5) + l %r0,__VDSO_TK_MULT(%r5) ltr %r1,%r1 mr %r0,%r0 jnm 13f - a %r0,__VDSO_NTP_MULT(%r5) + a %r0,__VDSO_TK_MULT(%r5) 13: alr %r0,%r2 - srdl %r0,12 - al %r0,__VDSO_XTIME_NSEC(%r5) /* + xtime */ + al %r0,__VDSO_XTIME_NSEC(%r5) /* + tk->xtime_nsec */ al %r1,__VDSO_XTIME_NSEC+4(%r5) brc 12,14f ahi %r0,1 -14: l %r2,__VDSO_XTIME_SEC+4(%r5) +14: l %r2,__VDSO_TK_SHIFT(%r5) /* Timekeeper shift */ + srdl %r0,0(%r2) /* >> tk->shift */ + l %r2,__VDSO_XTIME_SEC+4(%r5) cl %r4,__VDSO_UPD_COUNT+4(%r5) /* check update counter */ jne 11b basr %r5,0 diff --git a/arch/s390/kernel/vdso32/gettimeofday.S b/arch/s390/kernel/vdso32/gettimeofday.S index 2d3633175e3..fd621a950f7 100644 --- a/arch/s390/kernel/vdso32/gettimeofday.S +++ b/arch/s390/kernel/vdso32/gettimeofday.S @@ -35,15 +35,14 @@ __kernel_gettimeofday: sl %r1,__VDSO_XTIME_STAMP+4(%r5) brc 3,3f ahi %r0,-1 -3: ms %r0,__VDSO_NTP_MULT(%r5) /* cyc2ns(clock,cycle_delta) */ +3: ms %r0,__VDSO_TK_MULT(%r5) /* * tk->mult */ st %r0,24(%r15) - l %r0,__VDSO_NTP_MULT(%r5) + l %r0,__VDSO_TK_MULT(%r5) ltr %r1,%r1 mr %r0,%r0 jnm 4f - a %r0,__VDSO_NTP_MULT(%r5) + a %r0,__VDSO_TK_MULT(%r5) 4: al %r0,24(%r15) - srdl %r0,12 al %r0,__VDSO_XTIME_NSEC(%r5) /* + xtime */ al %r1,__VDSO_XTIME_NSEC+4(%r5) brc 12,5f @@ -51,6 +50,8 @@ __kernel_gettimeofday: 5: mvc 24(4,%r15),__VDSO_XTIME_SEC+4(%r5) cl %r4,__VDSO_UPD_COUNT+4(%r5) /* check update counter */ jne 1b + l %r4,__VDSO_TK_SHIFT(%r5) /* Timekeeper shift */ + srdl %r0,0(%r4) /* >> tk->shift */ l %r4,24(%r15) /* get tv_sec from stack */ basr %r5,0 6: ltr %r0,%r0 diff --git a/arch/s390/kernel/vdso64/clock_gettime.S b/arch/s390/kernel/vdso64/clock_gettime.S index d46c95ed5f1..0add1072ba3 100644 --- a/arch/s390/kernel/vdso64/clock_gettime.S +++ b/arch/s390/kernel/vdso64/clock_gettime.S @@ -34,14 +34,15 @@ __kernel_clock_gettime: tmll %r4,0x0001 /* pending update ? loop */ jnz 0b stck 48(%r15) /* Store TOD clock */ + lgf %r2,__VDSO_TK_SHIFT(%r5) /* Timekeeper shift */ + lg %r0,__VDSO_XTIME_SEC(%r5) /* tk->xtime_sec */ + alg %r0,__VDSO_WTOM_SEC(%r5) /* + wall_to_monotonic.sec */ lg %r1,48(%r15) sg %r1,__VDSO_XTIME_STAMP(%r5) /* TOD - cycle_last */ - msgf %r1,__VDSO_NTP_MULT(%r5) /* * NTP adjustment */ - srlg %r1,%r1,12 /* cyc2ns(clock,cycle_delta) */ - alg %r1,__VDSO_XTIME_NSEC(%r5) /* + xtime */ - lg %r0,__VDSO_XTIME_SEC(%r5) - alg %r1,__VDSO_WTOM_NSEC(%r5) /* + wall_to_monotonic */ - alg %r0,__VDSO_WTOM_SEC(%r5) + msgf %r1,__VDSO_TK_MULT(%r5) /* * tk->mult */ + alg %r1,__VDSO_XTIME_NSEC(%r5) /* + tk->xtime_nsec */ + alg %r1,__VDSO_WTOM_NSEC(%r5) /* + wall_to_monotonic.nsec */ + srlg %r1,%r1,0(%r2) /* >> tk->shift */ clg %r4,__VDSO_UPD_COUNT(%r5) /* check update counter */ jne 0b larl %r5,13f @@ -62,12 +63,13 @@ __kernel_clock_gettime: tmll %r4,0x0001 /* pending update ? loop */ jnz 5b stck 48(%r15) /* Store TOD clock */ + lgf %r2,__VDSO_TK_SHIFT(%r5) /* Timekeeper shift */ lg %r1,48(%r15) sg %r1,__VDSO_XTIME_STAMP(%r5) /* TOD - cycle_last */ - msgf %r1,__VDSO_NTP_MULT(%r5) /* * NTP adjustment */ - srlg %r1,%r1,12 /* cyc2ns(clock,cycle_delta) */ - alg %r1,__VDSO_XTIME_NSEC(%r5) /* + xtime */ - lg %r0,__VDSO_XTIME_SEC(%r5) + msgf %r1,__VDSO_TK_MULT(%r5) /* * tk->mult */ + alg %r1,__VDSO_XTIME_NSEC(%r5) /* + tk->xtime_nsec */ + srlg %r1,%r1,0(%r2) /* >> tk->shift */ + lg %r0,__VDSO_XTIME_SEC(%r5) /* tk->xtime_sec */ clg %r4,__VDSO_UPD_COUNT(%r5) /* check update counter */ jne 5b larl %r5,13f diff --git a/arch/s390/kernel/vdso64/gettimeofday.S b/arch/s390/kernel/vdso64/gettimeofday.S index 36ee674722e..d0860d1d0cc 100644 --- a/arch/s390/kernel/vdso64/gettimeofday.S +++ b/arch/s390/kernel/vdso64/gettimeofday.S @@ -31,12 +31,13 @@ __kernel_gettimeofday: stck 48(%r15) /* Store TOD clock */ lg %r1,48(%r15) sg %r1,__VDSO_XTIME_STAMP(%r5) /* TOD - cycle_last */ - msgf %r1,__VDSO_NTP_MULT(%r5) /* * NTP adjustment */ - srlg %r1,%r1,12 /* cyc2ns(clock,cycle_delta) */ - alg %r1,__VDSO_XTIME_NSEC(%r5) /* + xtime.tv_nsec */ - lg %r0,__VDSO_XTIME_SEC(%r5) /* xtime.tv_sec */ + msgf %r1,__VDSO_TK_MULT(%r5) /* * tk->mult */ + alg %r1,__VDSO_XTIME_NSEC(%r5) /* + tk->xtime_nsec */ + lg %r0,__VDSO_XTIME_SEC(%r5) /* tk->xtime_sec */ clg %r4,__VDSO_UPD_COUNT(%r5) /* check update counter */ jne 0b + lgf %r5,__VDSO_TK_SHIFT(%r5) /* Timekeeper shift */ + srlg %r1,%r1,0(%r5) /* >> tk->shift */ larl %r5,5f 2: clg %r1,0(%r5) jl 3f diff --git a/arch/s390/lib/uaccess_pt.c b/arch/s390/lib/uaccess_pt.c index 97e03caf782..dbdab3e7a1a 100644 --- a/arch/s390/lib/uaccess_pt.c +++ b/arch/s390/lib/uaccess_pt.c @@ -78,11 +78,14 @@ static size_t copy_in_kernel(size_t count, void __user *to, * contains the (negative) exception code. */ #ifdef CONFIG_64BIT + static unsigned long follow_table(struct mm_struct *mm, unsigned long address, int write) { unsigned long *table = (unsigned long *)__pa(mm->pgd); + if (unlikely(address > mm->context.asce_limit - 1)) + return -0x38UL; switch (mm->context.asce_bits & _ASCE_TYPE_MASK) { case _ASCE_TYPE_REGION1: table = table + ((address >> 53) & 0x7ff); diff --git a/arch/x86/crypto/Makefile b/arch/x86/crypto/Makefile index 7d6ba9db1be..e0fc24db234 100644 --- a/arch/x86/crypto/Makefile +++ b/arch/x86/crypto/Makefile @@ -3,8 +3,9 @@ # avx_supported := $(call as-instr,vpxor %xmm0$(comma)%xmm0$(comma)%xmm0,yes,no) +avx2_supported := $(call as-instr,vpgatherdd %ymm0$(comma)(%eax$(comma)%ymm1\ + $(comma)4)$(comma)%ymm2,yes,no) -obj-$(CONFIG_CRYPTO_ABLK_HELPER_X86) += ablk_helper.o obj-$(CONFIG_CRYPTO_GLUE_HELPER_X86) += glue_helper.o obj-$(CONFIG_CRYPTO_AES_586) += aes-i586.o diff --git a/arch/x86/crypto/ablk_helper.c b/arch/x86/crypto/ablk_helper.c deleted file mode 100644 index 43282fe04a8..00000000000 --- a/arch/x86/crypto/ablk_helper.c +++ /dev/null @@ -1,149 +0,0 @@ -/* - * Shared async block cipher helpers - * - * Copyright (c) 2012 Jussi Kivilinna <jussi.kivilinna@mbnet.fi> - * - * Based on aesni-intel_glue.c by: - * Copyright (C) 2008, Intel Corp. - * Author: Huang Ying <ying.huang@intel.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 - * USA - * - */ - -#include <linux/kernel.h> -#include <linux/crypto.h> -#include <linux/init.h> -#include <linux/module.h> -#include <crypto/algapi.h> -#include <crypto/cryptd.h> -#include <asm/i387.h> -#include <asm/crypto/ablk_helper.h> - -int ablk_set_key(struct crypto_ablkcipher *tfm, const u8 *key, - unsigned int key_len) -{ - struct async_helper_ctx *ctx = crypto_ablkcipher_ctx(tfm); - struct crypto_ablkcipher *child = &ctx->cryptd_tfm->base; - int err; - - crypto_ablkcipher_clear_flags(child, CRYPTO_TFM_REQ_MASK); - crypto_ablkcipher_set_flags(child, crypto_ablkcipher_get_flags(tfm) - & CRYPTO_TFM_REQ_MASK); - err = crypto_ablkcipher_setkey(child, key, key_len); - crypto_ablkcipher_set_flags(tfm, crypto_ablkcipher_get_flags(child) - & CRYPTO_TFM_RES_MASK); - return err; -} -EXPORT_SYMBOL_GPL(ablk_set_key); - -int __ablk_encrypt(struct ablkcipher_request *req) -{ - struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(req); - struct async_helper_ctx *ctx = crypto_ablkcipher_ctx(tfm); - struct blkcipher_desc desc; - - desc.tfm = cryptd_ablkcipher_child(ctx->cryptd_tfm); - desc.info = req->info; - desc.flags = 0; - - return crypto_blkcipher_crt(desc.tfm)->encrypt( - &desc, req->dst, req->src, req->nbytes); -} -EXPORT_SYMBOL_GPL(__ablk_encrypt); - -int ablk_encrypt(struct ablkcipher_request *req) -{ - struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(req); - struct async_helper_ctx *ctx = crypto_ablkcipher_ctx(tfm); - - if (!irq_fpu_usable()) { - struct ablkcipher_request *cryptd_req = - ablkcipher_request_ctx(req); - - memcpy(cryptd_req, req, sizeof(*req)); - ablkcipher_request_set_tfm(cryptd_req, &ctx->cryptd_tfm->base); - - return crypto_ablkcipher_encrypt(cryptd_req); - } else { - return __ablk_encrypt(req); - } -} -EXPORT_SYMBOL_GPL(ablk_encrypt); - -int ablk_decrypt(struct ablkcipher_request *req) -{ - struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(req); - struct async_helper_ctx *ctx = crypto_ablkcipher_ctx(tfm); - - if (!irq_fpu_usable()) { - struct ablkcipher_request *cryptd_req = - ablkcipher_request_ctx(req); - - memcpy(cryptd_req, req, sizeof(*req)); - ablkcipher_request_set_tfm(cryptd_req, &ctx->cryptd_tfm->base); - - return crypto_ablkcipher_decrypt(cryptd_req); - } else { - struct blkcipher_desc desc; - - desc.tfm = cryptd_ablkcipher_child(ctx->cryptd_tfm); - desc.info = req->info; - desc.flags = 0; - - return crypto_blkcipher_crt(desc.tfm)->decrypt( - &desc, req->dst, req->src, req->nbytes); - } -} -EXPORT_SYMBOL_GPL(ablk_decrypt); - -void ablk_exit(struct crypto_tfm *tfm) -{ - struct async_helper_ctx *ctx = crypto_tfm_ctx(tfm); - - cryptd_free_ablkcipher(ctx->cryptd_tfm); -} -EXPORT_SYMBOL_GPL(ablk_exit); - -int ablk_init_common(struct crypto_tfm *tfm, const char *drv_name) -{ - struct async_helper_ctx *ctx = crypto_tfm_ctx(tfm); - struct cryptd_ablkcipher *cryptd_tfm; - - cryptd_tfm = cryptd_alloc_ablkcipher(drv_name, 0, 0); - if (IS_ERR(cryptd_tfm)) - return PTR_ERR(cryptd_tfm); - - ctx->cryptd_tfm = cryptd_tfm; - tfm->crt_ablkcipher.reqsize = sizeof(struct ablkcipher_request) + - crypto_ablkcipher_reqsize(&cryptd_tfm->base); - - return 0; -} -EXPORT_SYMBOL_GPL(ablk_init_common); - -int ablk_init(struct crypto_tfm *tfm) -{ - char drv_name[CRYPTO_MAX_ALG_NAME]; - - snprintf(drv_name, sizeof(drv_name), "__driver-%s", - crypto_tfm_alg_driver_name(tfm)); - - return ablk_init_common(tfm, drv_name); -} -EXPORT_SYMBOL_GPL(ablk_init); - -MODULE_LICENSE("GPL"); diff --git a/arch/x86/crypto/aesni-intel_glue.c b/arch/x86/crypto/aesni-intel_glue.c index f80e668785c..835488b745e 100644 --- a/arch/x86/crypto/aesni-intel_glue.c +++ b/arch/x86/crypto/aesni-intel_glue.c @@ -34,7 +34,7 @@ #include <asm/cpu_device_id.h> #include <asm/i387.h> #include <asm/crypto/aes.h> -#include <asm/crypto/ablk_helper.h> +#include <crypto/ablk_helper.h> #include <crypto/scatterwalk.h> #include <crypto/internal/aead.h> #include <linux/workqueue.h> diff --git a/arch/x86/crypto/camellia_aesni_avx2_glue.c b/arch/x86/crypto/camellia_aesni_avx2_glue.c index 414fe5d7946..4209a76fcda 100644 --- a/arch/x86/crypto/camellia_aesni_avx2_glue.c +++ b/arch/x86/crypto/camellia_aesni_avx2_glue.c @@ -14,6 +14,7 @@ #include <linux/types.h> #include <linux/crypto.h> #include <linux/err.h> +#include <crypto/ablk_helper.h> #include <crypto/algapi.h> #include <crypto/ctr.h> #include <crypto/lrw.h> @@ -21,7 +22,6 @@ #include <asm/xcr.h> #include <asm/xsave.h> #include <asm/crypto/camellia.h> -#include <asm/crypto/ablk_helper.h> #include <asm/crypto/glue_helper.h> #define CAMELLIA_AESNI_PARALLEL_BLOCKS 16 diff --git a/arch/x86/crypto/camellia_aesni_avx_glue.c b/arch/x86/crypto/camellia_aesni_avx_glue.c index 37fd0c0a81e..87a041a10f4 100644 --- a/arch/x86/crypto/camellia_aesni_avx_glue.c +++ b/arch/x86/crypto/camellia_aesni_avx_glue.c @@ -14,6 +14,7 @@ #include <linux/types.h> #include <linux/crypto.h> #include <linux/err.h> +#include <crypto/ablk_helper.h> #include <crypto/algapi.h> #include <crypto/ctr.h> #include <crypto/lrw.h> @@ -21,7 +22,6 @@ #include <asm/xcr.h> #include <asm/xsave.h> #include <asm/crypto/camellia.h> -#include <asm/crypto/ablk_helper.h> #include <asm/crypto/glue_helper.h> #define CAMELLIA_AESNI_PARALLEL_BLOCKS 16 diff --git a/arch/x86/crypto/cast5_avx_glue.c b/arch/x86/crypto/cast5_avx_glue.c index c6631813dc1..e6a3700489b 100644 --- a/arch/x86/crypto/cast5_avx_glue.c +++ b/arch/x86/crypto/cast5_avx_glue.c @@ -26,13 +26,13 @@ #include <linux/types.h> #include <linux/crypto.h> #include <linux/err.h> +#include <crypto/ablk_helper.h> #include <crypto/algapi.h> #include <crypto/cast5.h> #include <crypto/cryptd.h> #include <crypto/ctr.h> #include <asm/xcr.h> #include <asm/xsave.h> -#include <asm/crypto/ablk_helper.h> #include <asm/crypto/glue_helper.h> #define CAST5_PARALLEL_BLOCKS 16 diff --git a/arch/x86/crypto/cast6_avx_glue.c b/arch/x86/crypto/cast6_avx_glue.c index 8d0dfb86a55..09f3677393e 100644 --- a/arch/x86/crypto/cast6_avx_glue.c +++ b/arch/x86/crypto/cast6_avx_glue.c @@ -28,6 +28,7 @@ #include <linux/types.h> #include <linux/crypto.h> #include <linux/err.h> +#include <crypto/ablk_helper.h> #include <crypto/algapi.h> #include <crypto/cast6.h> #include <crypto/cryptd.h> @@ -37,7 +38,6 @@ #include <crypto/xts.h> #include <asm/xcr.h> #include <asm/xsave.h> -#include <asm/crypto/ablk_helper.h> #include <asm/crypto/glue_helper.h> #define CAST6_PARALLEL_BLOCKS 8 diff --git a/arch/x86/crypto/serpent_avx2_glue.c b/arch/x86/crypto/serpent_avx2_glue.c index 23aabc6c20a..2fae489b152 100644 --- a/arch/x86/crypto/serpent_avx2_glue.c +++ b/arch/x86/crypto/serpent_avx2_glue.c @@ -14,6 +14,7 @@ #include <linux/types.h> #include <linux/crypto.h> #include <linux/err.h> +#include <crypto/ablk_helper.h> #include <crypto/algapi.h> #include <crypto/ctr.h> #include <crypto/lrw.h> @@ -22,7 +23,6 @@ #include <asm/xcr.h> #include <asm/xsave.h> #include <asm/crypto/serpent-avx.h> -#include <asm/crypto/ablk_helper.h> #include <asm/crypto/glue_helper.h> #define SERPENT_AVX2_PARALLEL_BLOCKS 16 diff --git a/arch/x86/crypto/serpent_avx_glue.c b/arch/x86/crypto/serpent_avx_glue.c index 9ae83cf8d21..ff487087097 100644 --- a/arch/x86/crypto/serpent_avx_glue.c +++ b/arch/x86/crypto/serpent_avx_glue.c @@ -28,6 +28,7 @@ #include <linux/types.h> #include <linux/crypto.h> #include <linux/err.h> +#include <crypto/ablk_helper.h> #include <crypto/algapi.h> #include <crypto/serpent.h> #include <crypto/cryptd.h> @@ -38,7 +39,6 @@ #include <asm/xcr.h> #include <asm/xsave.h> #include <asm/crypto/serpent-avx.h> -#include <asm/crypto/ablk_helper.h> #include <asm/crypto/glue_helper.h> /* 8-way parallel cipher functions */ diff --git a/arch/x86/crypto/serpent_sse2_glue.c b/arch/x86/crypto/serpent_sse2_glue.c index 97a356ece24..8c95f863730 100644 --- a/arch/x86/crypto/serpent_sse2_glue.c +++ b/arch/x86/crypto/serpent_sse2_glue.c @@ -34,6 +34,7 @@ #include <linux/types.h> #include <linux/crypto.h> #include <linux/err.h> +#include <crypto/ablk_helper.h> #include <crypto/algapi.h> #include <crypto/serpent.h> #include <crypto/cryptd.h> @@ -42,7 +43,6 @@ #include <crypto/lrw.h> #include <crypto/xts.h> #include <asm/crypto/serpent-sse2.h> -#include <asm/crypto/ablk_helper.h> #include <asm/crypto/glue_helper.h> static void serpent_decrypt_cbc_xway(void *ctx, u128 *dst, const u128 *src) diff --git a/arch/x86/crypto/sha256_ssse3_glue.c b/arch/x86/crypto/sha256_ssse3_glue.c index 50226c4b86e..f248546da1c 100644 --- a/arch/x86/crypto/sha256_ssse3_glue.c +++ b/arch/x86/crypto/sha256_ssse3_glue.c @@ -281,7 +281,7 @@ static int __init sha256_ssse3_mod_init(void) /* allow AVX to override SSSE3, it's a little faster */ if (avx_usable()) { #ifdef CONFIG_AS_AVX2 - if (boot_cpu_has(X86_FEATURE_AVX2)) + if (boot_cpu_has(X86_FEATURE_AVX2) && boot_cpu_has(X86_FEATURE_BMI2)) sha256_transform_asm = sha256_transform_rorx; else #endif @@ -319,4 +319,4 @@ MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("SHA256 Secure Hash Algorithm, Supplemental SSE3 accelerated"); MODULE_ALIAS("sha256"); -MODULE_ALIAS("sha384"); +MODULE_ALIAS("sha224"); diff --git a/arch/x86/crypto/twofish_avx_glue.c b/arch/x86/crypto/twofish_avx_glue.c index a62ba541884..4e3c665be12 100644 --- a/arch/x86/crypto/twofish_avx_glue.c +++ b/arch/x86/crypto/twofish_avx_glue.c @@ -28,6 +28,7 @@ #include <linux/types.h> #include <linux/crypto.h> #include <linux/err.h> +#include <crypto/ablk_helper.h> #include <crypto/algapi.h> #include <crypto/twofish.h> #include <crypto/cryptd.h> @@ -39,7 +40,6 @@ #include <asm/xcr.h> #include <asm/xsave.h> #include <asm/crypto/twofish.h> -#include <asm/crypto/ablk_helper.h> #include <asm/crypto/glue_helper.h> #include <crypto/scatterwalk.h> #include <linux/workqueue.h> diff --git a/arch/x86/include/asm/crypto/ablk_helper.h b/arch/x86/include/asm/crypto/ablk_helper.h deleted file mode 100644 index 4f93df50c23..00000000000 --- a/arch/x86/include/asm/crypto/ablk_helper.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * Shared async block cipher helpers - */ - -#ifndef _CRYPTO_ABLK_HELPER_H -#define _CRYPTO_ABLK_HELPER_H - -#include <linux/crypto.h> -#include <linux/kernel.h> -#include <crypto/cryptd.h> - -struct async_helper_ctx { - struct cryptd_ablkcipher *cryptd_tfm; -}; - -extern int ablk_set_key(struct crypto_ablkcipher *tfm, const u8 *key, - unsigned int key_len); - -extern int __ablk_encrypt(struct ablkcipher_request *req); - -extern int ablk_encrypt(struct ablkcipher_request *req); - -extern int ablk_decrypt(struct ablkcipher_request *req); - -extern void ablk_exit(struct crypto_tfm *tfm); - -extern int ablk_init_common(struct crypto_tfm *tfm, const char *drv_name); - -extern int ablk_init(struct crypto_tfm *tfm); - -#endif /* _CRYPTO_ABLK_HELPER_H */ diff --git a/arch/x86/include/asm/simd.h b/arch/x86/include/asm/simd.h new file mode 100644 index 00000000000..ee80b92f009 --- /dev/null +++ b/arch/x86/include/asm/simd.h @@ -0,0 +1,11 @@ + +#include <asm/i387.h> + +/* + * may_use_simd - whether it is allowable at this time to issue SIMD + * instructions or access the SIMD register file + */ +static __must_check inline bool may_use_simd(void) +{ + return irq_fpu_usable(); +} |