diff options
Diffstat (limited to 'arch')
69 files changed, 509 insertions, 263 deletions
diff --git a/arch/arm/configs/at91cap9adk_defconfig b/arch/arm/configs/at91cap9_defconfig index ffb1edd9336..8826eb218e7 100644 --- a/arch/arm/configs/at91cap9adk_defconfig +++ b/arch/arm/configs/at91cap9_defconfig @@ -38,7 +38,6 @@ CONFIG_IP_PNP_RARP=y # CONFIG_IPV6 is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y @@ -52,16 +51,12 @@ CONFIG_MTD_NAND_ATMEL=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_ATMEL_SSC=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_SCSI_MULTI_LUN=y CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y CONFIG_MII=y CONFIG_MACB=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_KEYBOARD is not set @@ -81,7 +76,6 @@ CONFIG_WATCHDOG=y CONFIG_WATCHDOG_NOWAYOUT=y CONFIG_FB=y CONFIG_FB_ATMEL=y -# CONFIG_VGA_CONSOLE is not set CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set # CONFIG_LOGO_LINUX_CLUT224 is not set @@ -99,7 +93,6 @@ CONFIG_MMC_AT91=m CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AT91SAM9=y CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y CONFIG_JFFS2_FS=y diff --git a/arch/arm/configs/at91rm9200_defconfig b/arch/arm/configs/at91rm9200_defconfig index 38cb7c98542..bbe4e1a1f5d 100644 --- a/arch/arm/configs/at91rm9200_defconfig +++ b/arch/arm/configs/at91rm9200_defconfig @@ -5,7 +5,6 @@ CONFIG_SYSVIPC=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_BLK_DEV_INITRD=y CONFIG_MODULES=y CONFIG_MODULE_FORCE_LOAD=y @@ -56,7 +55,6 @@ CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_NET_IPIP=m -CONFIG_NET_IPGRE=m CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m @@ -75,18 +73,8 @@ CONFIG_IPV6_TUNNEL=m CONFIG_BRIDGE=m CONFIG_VLAN_8021Q=m CONFIG_BT=m -CONFIG_BT_L2CAP=m -CONFIG_BT_SCO=m -CONFIG_BT_RFCOMM=m -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=m -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_HIDP=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_AFS_PARTS=y CONFIG_MTD_CHAR=y @@ -108,8 +96,6 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_NBD=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_ATMEL_TCLIB=y -CONFIG_EEPROM_LEGACY=m CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_BLK_DEV_SR=m @@ -119,14 +105,23 @@ CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_LOWLEVEL is not set CONFIG_NETDEVICES=y CONFIG_TUN=m +CONFIG_ARM_AT91_ETHER=y CONFIG_PHYLIB=y CONFIG_DAVICOM_PHY=y CONFIG_SMSC_PHY=y CONFIG_MICREL_PHY=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +CONFIG_PPP=y +CONFIG_PPP_BSDCOMP=y +CONFIG_PPP_DEFLATE=y +CONFIG_PPP_FILTER=y +CONFIG_PPP_MPPE=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPPOE=m +CONFIG_PPP_ASYNC=y +CONFIG_SLIP=m +CONFIG_SLIP_COMPRESSED=y +CONFIG_SLIP_SMART=y +CONFIG_SLIP_MODE_SLIP6=y CONFIG_USB_CATC=m CONFIG_USB_KAWETH=m CONFIG_USB_PEGASUS=m @@ -139,18 +134,6 @@ CONFIG_USB_NET_RNDIS_HOST=m CONFIG_USB_ALI_M5632=y CONFIG_USB_AN2720=y CONFIG_USB_EPSON2888=y -CONFIG_PPP=y -CONFIG_PPP_MULTILINK=y -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=y -CONFIG_PPP_DEFLATE=y -CONFIG_PPP_BSDCOMP=y -CONFIG_PPP_MPPE=m -CONFIG_PPPOE=m -CONFIG_SLIP=m -CONFIG_SLIP_COMPRESSED=y -CONFIG_SLIP_SMART=y -CONFIG_SLIP_MODE_SLIP6=y # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_MOUSEDEV_SCREEN_X=640 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480 @@ -158,9 +141,9 @@ CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_LEGACY_PTY_COUNT=32 CONFIG_SERIAL_ATMEL=y CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_LEGACY_PTY_COUNT=32 CONFIG_HW_RANDOM=y CONFIG_I2C=y CONFIG_I2C_CHARDEV=y @@ -290,7 +273,6 @@ CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y CONFIG_NFSD=y -CONFIG_SMB_FS=m CONFIG_CIFS=m CONFIG_PARTITION_ADVANCED=y CONFIG_MAC_PARTITION=y @@ -335,7 +317,6 @@ CONFIG_NLS_UTF8=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_FTRACE is not set CONFIG_CRYPTO_PCBC=y CONFIG_CRYPTO_SHA1=y diff --git a/arch/arm/configs/at91sam9260ek_defconfig b/arch/arm/configs/at91sam9260_defconfig index f8a9226413b..505b3765f87 100644 --- a/arch/arm/configs/at91sam9260ek_defconfig +++ b/arch/arm/configs/at91sam9260_defconfig @@ -12,11 +12,23 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_IOSCHED_CFQ is not set CONFIG_ARCH_AT91=y CONFIG_ARCH_AT91SAM9260=y +CONFIG_ARCH_AT91SAM9260_SAM9XE=y CONFIG_MACH_AT91SAM9260EK=y +CONFIG_MACH_CAM60=y +CONFIG_MACH_SAM9_L9260=y +CONFIG_MACH_AFEB9260=y +CONFIG_MACH_USB_A9260=y +CONFIG_MACH_QIL_A9260=y +CONFIG_MACH_CPU9260=y +CONFIG_MACH_FLEXIBITY=y +CONFIG_MACH_SNAPPER_9260=y +CONFIG_MACH_AT91SAM_DT=y CONFIG_AT91_PROGRAMMABLE_CLOCKS=y # CONFIG_ARM_THUMB is not set CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_ARM_APPENDED_DTB=y +CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" CONFIG_FPE_NWFPE=y CONFIG_NET=y @@ -33,12 +45,10 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_ATMEL_SSC=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_SCSI_MULTI_LUN=y CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y CONFIG_MII=y CONFIG_MACB=y # CONFIG_INPUT_MOUSEDEV_PSAUX is not set @@ -55,7 +65,6 @@ CONFIG_I2C_GPIO=y CONFIG_WATCHDOG=y CONFIG_WATCHDOG_NOWAYOUT=y CONFIG_AT91SAM9X_WATCHDOG=y -# CONFIG_VGA_CONSOLE is not set # CONFIG_USB_HID is not set CONFIG_USB=y CONFIG_USB_DEVICEFS=y @@ -71,7 +80,6 @@ CONFIG_USB_G_SERIAL=m CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AT91SAM9=y CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y CONFIG_CRAMFS=y diff --git a/arch/arm/configs/at91sam9g20ek_defconfig b/arch/arm/configs/at91sam9g20_defconfig index 9e90e6d7929..9123568d9a8 100644 --- a/arch/arm/configs/at91sam9g20ek_defconfig +++ b/arch/arm/configs/at91sam9g20_defconfig @@ -14,6 +14,15 @@ CONFIG_ARCH_AT91=y CONFIG_ARCH_AT91SAM9G20=y CONFIG_MACH_AT91SAM9G20EK=y CONFIG_MACH_AT91SAM9G20EK_2MMC=y +CONFIG_MACH_CPU9G20=y +CONFIG_MACH_ACMENETUSFOXG20=y +CONFIG_MACH_PORTUXG20=y +CONFIG_MACH_STAMP9G20=y +CONFIG_MACH_PCONTROL_G20=y +CONFIG_MACH_GSIA18S=y +CONFIG_MACH_USB_A9G20=y +CONFIG_MACH_SNAPPER_9260=y +CONFIG_MACH_AT91SAM_DT=y CONFIG_AT91_PROGRAMMABLE_CLOCKS=y # CONFIG_ARM_THUMB is not set CONFIG_AEABI=y @@ -21,9 +30,10 @@ CONFIG_LEDS=y CONFIG_LEDS_CPU=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_ARM_APPENDED_DTB=y +CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" CONFIG_FPE_NWFPE=y -CONFIG_PM=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -37,8 +47,6 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_IPV6 is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y @@ -48,17 +56,13 @@ CONFIG_MTD_NAND_ATMEL=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_ATMEL_SSC=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_LOWLEVEL is not set CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y CONFIG_MII=y CONFIG_MACB=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_MOUSEDEV_SCREEN_X=320 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240 @@ -66,15 +70,14 @@ CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set +CONFIG_LEGACY_PTY_COUNT=16 CONFIG_SERIAL_ATMEL=y CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_LEGACY_PTY_COUNT=16 CONFIG_HW_RANDOM=y CONFIG_SPI=y CONFIG_SPI_ATMEL=y CONFIG_SPI_SPIDEV=y # CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set CONFIG_SOUND=y CONFIG_SND=y CONFIG_SND_SEQUENCER=y @@ -82,7 +85,6 @@ CONFIG_SND_MIXER_OSS=y CONFIG_SND_PCM_OSS=y CONFIG_SND_SEQUENCER_OSS=y # CONFIG_SND_VERBOSE_PROCFS is not set -CONFIG_SND_AT73C213=y CONFIG_USB=y CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set @@ -105,7 +107,6 @@ CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AT91SAM9=y CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y diff --git a/arch/arm/configs/at91sam9g45_defconfig b/arch/arm/configs/at91sam9g45_defconfig index c5876d244f4..606d48f3b8f 100644 --- a/arch/arm/configs/at91sam9g45_defconfig +++ b/arch/arm/configs/at91sam9g45_defconfig @@ -18,6 +18,7 @@ CONFIG_MODULE_UNLOAD=y CONFIG_ARCH_AT91=y CONFIG_ARCH_AT91SAM9G45=y CONFIG_MACH_AT91SAM9M10G45EK=y +CONFIG_MACH_AT91SAM_DT=y CONFIG_AT91_PROGRAMMABLE_CLOCKS=y CONFIG_AT91_SLOW_CLOCK=y CONFIG_AEABI=y @@ -73,11 +74,8 @@ CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_LOWLEVEL is not set CONFIG_NETDEVICES=y CONFIG_MII=y -CONFIG_DAVICOM_PHY=y -CONFIG_NET_ETHERNET=y CONFIG_MACB=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +CONFIG_DAVICOM_PHY=y CONFIG_LIBERTAS_THINFIRM=m CONFIG_LIBERTAS_THINFIRM_USB=m CONFIG_AT76C50X_USB=m @@ -131,7 +129,6 @@ CONFIG_I2C_GPIO=y CONFIG_SPI=y CONFIG_SPI_ATMEL=y # CONFIG_HWMON is not set -# CONFIG_MFD_SUPPORT is not set CONFIG_FB=y CONFIG_FB_ATMEL=y CONFIG_FB_UDL=m diff --git a/arch/arm/configs/at91sam9rlek_defconfig b/arch/arm/configs/at91sam9rl_defconfig index 75621e4d03f..ad562ee6420 100644 --- a/arch/arm/configs/at91sam9rlek_defconfig +++ b/arch/arm/configs/at91sam9rl_defconfig @@ -23,8 +23,6 @@ CONFIG_NET=y CONFIG_UNIX=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y @@ -35,7 +33,6 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=4 CONFIG_BLK_DEV_RAM_SIZE=24576 -CONFIG_ATMEL_SSC=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_SCSI_MULTI_LUN=y @@ -62,13 +59,11 @@ CONFIG_WATCHDOG_NOWAYOUT=y CONFIG_AT91SAM9X_WATCHDOG=y CONFIG_FB=y CONFIG_FB_ATMEL=y -# CONFIG_VGA_CONSOLE is not set CONFIG_MMC=y CONFIG_MMC_AT91=m CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AT91SAM9=y CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y diff --git a/arch/arm/configs/ezx_defconfig b/arch/arm/configs/ezx_defconfig index 227a477346e..d95763d5f0d 100644 --- a/arch/arm/configs/ezx_defconfig +++ b/arch/arm/configs/ezx_defconfig @@ -287,7 +287,7 @@ CONFIG_USB=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_PXA27X=y +CONFIG_USB_PXA27X=y CONFIG_USB_ETH=m # CONFIG_USB_ETH_RNDIS is not set CONFIG_MMC=y diff --git a/arch/arm/configs/imote2_defconfig b/arch/arm/configs/imote2_defconfig index 176ec22af03..fd996bb1302 100644 --- a/arch/arm/configs/imote2_defconfig +++ b/arch/arm/configs/imote2_defconfig @@ -263,7 +263,7 @@ CONFIG_USB=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_PXA27X=y +CONFIG_USB_PXA27X=y CONFIG_USB_ETH=m # CONFIG_USB_ETH_RNDIS is not set CONFIG_MMC=y diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig index a88e64d4e9a..443675d317e 100644 --- a/arch/arm/configs/magician_defconfig +++ b/arch/arm/configs/magician_defconfig @@ -132,7 +132,7 @@ CONFIG_USB_MON=m CONFIG_USB_OHCI_HCD=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_VBUS_DRAW=500 -CONFIG_USB_GADGET_PXA27X=y +CONFIG_USB_PXA27X=y CONFIG_USB_ETH=m # CONFIG_USB_ETH_RNDIS is not set CONFIG_USB_GADGETFS=m diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig index 7b63462b349..a7e77758137 100644 --- a/arch/arm/configs/omap1_defconfig +++ b/arch/arm/configs/omap1_defconfig @@ -48,7 +48,6 @@ CONFIG_MACH_SX1=y CONFIG_MACH_NOKIA770=y CONFIG_MACH_AMS_DELTA=y CONFIG_MACH_OMAP_GENERIC=y -CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y CONFIG_OMAP_ARM_216MHZ=y CONFIG_OMAP_ARM_195MHZ=y CONFIG_OMAP_ARM_192MHZ=y diff --git a/arch/arm/configs/u300_defconfig b/arch/arm/configs/u300_defconfig index 4a5a12681be..374000ec4e4 100644 --- a/arch/arm/configs/u300_defconfig +++ b/arch/arm/configs/u300_defconfig @@ -14,8 +14,6 @@ CONFIG_MODULE_UNLOAD=y CONFIG_ARCH_U300=y CONFIG_MACH_U300=y CONFIG_MACH_U300_BS335=y -CONFIG_MACH_U300_DUAL_RAM=y -CONFIG_U300_DEBUG=y CONFIG_MACH_U300_SPIDUMMY=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y @@ -26,19 +24,21 @@ CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="root=/dev/ram0 rw rootfstype=rootfs console=ttyAMA0,115200n8 lpj=515072" CONFIG_CPU_IDLE=y CONFIG_FPE_NWFPE=y -CONFIG_PM=y # CONFIG_SUSPEND is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_PREVENT_FIRMWARE_BUILD is not set -# CONFIG_MISC_DEVICES is not set +CONFIG_MTD=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_FSMC=y # CONFIG_INPUT_MOUSEDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_SERIO is not set +CONFIG_LEGACY_PTY_COUNT=16 CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y -CONFIG_LEGACY_PTY_COUNT=16 # CONFIG_HW_RANDOM is not set CONFIG_I2C=y # CONFIG_HWMON is not set @@ -51,6 +51,7 @@ CONFIG_BACKLIGHT_CLASS_DEVICE=y # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set CONFIG_MMC=y +CONFIG_MMC_CLKGATE=y CONFIG_MMC_ARMMMCI=y CONFIG_RTC_CLASS=y # CONFIG_RTC_HCTOSYS is not set @@ -65,10 +66,8 @@ CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_PRINTK_TIME=y CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y # CONFIG_SCHED_DEBUG is not set CONFIG_TIMER_STATS=y # CONFIG_DEBUG_PREEMPT is not set CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_CRC32 is not set diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index 97d31a4663d..2d7b6e7b727 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -10,7 +10,7 @@ CONFIG_MODULE_UNLOAD=y CONFIG_ARCH_U8500=y CONFIG_UX500_SOC_DB5500=y CONFIG_UX500_SOC_DB8500=y -CONFIG_MACH_U8500=y +CONFIG_MACH_HREFV60=y CONFIG_MACH_SNOWBALL=y CONFIG_MACH_U5500=y CONFIG_NO_HZ=y @@ -24,6 +24,7 @@ CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_VFP=y CONFIG_NEON=y +CONFIG_PM_RUNTIME=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -41,11 +42,8 @@ CONFIG_MISC_DEVICES=y CONFIG_AB8500_PWM=y CONFIG_SENSORS_BH1780=y CONFIG_NETDEVICES=y -CONFIG_SMSC_PHY=y -CONFIG_NET_ETHERNET=y CONFIG_SMSC911X=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +CONFIG_SMSC_PHY=y # CONFIG_WLAN is not set # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_EVDEV=y @@ -72,15 +70,12 @@ CONFIG_SPI=y CONFIG_SPI_PL022=y CONFIG_GPIO_STMPE=y CONFIG_GPIO_TC3589X=y -# CONFIG_HWMON is not set CONFIG_MFD_STMPE=y CONFIG_MFD_TC3589X=y +CONFIG_AB5500_CORE=y CONFIG_AB8500_CORE=y CONFIG_REGULATOR_AB8500=y # CONFIG_HID_SUPPORT is not set -CONFIG_USB_MUSB_HDRC=y -CONFIG_USB_GADGET_MUSB_HDRC=y -CONFIG_MUSB_PIO_ONLY=y CONFIG_USB_GADGET=y CONFIG_AB8500_USB=y CONFIG_MMC=y @@ -97,6 +92,7 @@ CONFIG_DMADEVICES=y CONFIG_STE_DMA40=y CONFIG_STAGING=y CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=y +CONFIG_HSEM_U8500=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y diff --git a/arch/arm/configs/zeus_defconfig b/arch/arm/configs/zeus_defconfig index 59577ad3f4e..547a3c1e59d 100644 --- a/arch/arm/configs/zeus_defconfig +++ b/arch/arm/configs/zeus_defconfig @@ -140,7 +140,7 @@ CONFIG_USB_SERIAL=m CONFIG_USB_SERIAL_GENERIC=y CONFIG_USB_SERIAL_MCT_U232=m CONFIG_USB_GADGET=m -CONFIG_USB_GADGET_PXA27X=y +CONFIG_USB_PXA27X=y CONFIG_USB_ETH=m CONFIG_USB_GADGETFS=m CONFIG_USB_FILE_STORAGE=m diff --git a/arch/arm/mach-exynos/cpuidle.c b/arch/arm/mach-exynos/cpuidle.c index 35f6502144a..4ebb382c597 100644 --- a/arch/arm/mach-exynos/cpuidle.c +++ b/arch/arm/mach-exynos/cpuidle.c @@ -12,6 +12,8 @@ #include <linux/init.h> #include <linux/cpuidle.h> #include <linux/io.h> +#include <linux/export.h> +#include <linux/time.h> #include <asm/proc-fns.h> diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c index b82dcf08e74..88660d500f5 100644 --- a/arch/arm/mach-highbank/highbank.c +++ b/arch/arm/mach-highbank/highbank.c @@ -22,6 +22,7 @@ #include <linux/of_irq.h> #include <linux/of_platform.h> #include <linux/of_address.h> +#include <linux/smp.h> #include <asm/cacheflush.h> #include <asm/unified.h> @@ -72,6 +73,9 @@ static void __init highbank_map_io(void) void highbank_set_cpu_jump(int cpu, void *jump_addr) { +#ifdef CONFIG_SMP + cpu = cpu_logical_map(cpu); +#endif writel(BSYM(virt_to_phys(jump_addr)), HB_JUMP_TABLE_VIRT(cpu)); __cpuc_flush_dcache_area(HB_JUMP_TABLE_VIRT(cpu), 16); outer_clean_range(HB_JUMP_TABLE_PHYS(cpu), diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 5f7f9c2a34a..c44aa974e79 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -10,11 +10,6 @@ config HAVE_IMX_MMDC config HAVE_IMX_SRC bool -# -# ARCH_MX31 and ARCH_MX35 are left for compatibility -# Some usages assume that having one of them implies not having (e.g.) ARCH_MX2. -# To easily distinguish good and reviewed from unreviewed usages new (and IMHO -# more sensible) names are used: SOC_IMX31 and SOC_IMX35 config ARCH_MX1 bool @@ -27,12 +22,6 @@ config ARCH_MX25 config MACH_MX27 bool -config ARCH_MX31 - bool - -config ARCH_MX35 - bool - config SOC_IMX1 bool select ARCH_MX1 @@ -72,7 +61,6 @@ config SOC_IMX31 select CPU_V6 select IMX_HAVE_PLATFORM_MXC_RNGA select ARCH_MXC_AUDMUX_V2 - select ARCH_MX31 select MXC_AVIC select SMP_ON_UP if SMP @@ -82,7 +70,6 @@ config SOC_IMX35 select ARCH_MXC_IOMUX_V3 select ARCH_MXC_AUDMUX_V2 select HAVE_EPIT - select ARCH_MX35 select MXC_AVIC select SMP_ON_UP if SMP diff --git a/arch/arm/mach-imx/clock-imx6q.c b/arch/arm/mach-imx/clock-imx6q.c index 613a1b993bf..039a7abb165 100644 --- a/arch/arm/mach-imx/clock-imx6q.c +++ b/arch/arm/mach-imx/clock-imx6q.c @@ -1953,14 +1953,17 @@ static struct map_desc imx6q_clock_desc[] = { imx_map_entry(MX6Q, ANATOP, MT_DEVICE), }; +void __init imx6q_clock_map_io(void) +{ + iotable_init(imx6q_clock_desc, ARRAY_SIZE(imx6q_clock_desc)); +} + int __init mx6q_clocks_init(void) { struct device_node *np; void __iomem *base; int i, irq; - iotable_init(imx6q_clock_desc, ARRAY_SIZE(imx6q_clock_desc)); - /* retrieve the freqency of fixed clocks from device tree */ for_each_compatible_node(np, NULL, "fixed-clock") { u32 rate; diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 8bf5fa34948..9cd860a27af 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -34,6 +34,7 @@ static void __init imx6q_map_io(void) { imx_lluart_map_io(); imx_scu_map_io(); + imx6q_clock_map_io(); } static void __init imx6q_gpio_add_irq_domain(struct device_node *np, diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c index 9f0e82ec339..31807d2a8b7 100644 --- a/arch/arm/mach-imx/mm-imx3.c +++ b/arch/arm/mach-imx/mm-imx3.c @@ -33,29 +33,32 @@ static void imx3_idle(void) { unsigned long reg = 0; - __asm__ __volatile__( - /* disable I and D cache */ - "mrc p15, 0, %0, c1, c0, 0\n" - "bic %0, %0, #0x00001000\n" - "bic %0, %0, #0x00000004\n" - "mcr p15, 0, %0, c1, c0, 0\n" - /* invalidate I cache */ - "mov %0, #0\n" - "mcr p15, 0, %0, c7, c5, 0\n" - /* clear and invalidate D cache */ - "mov %0, #0\n" - "mcr p15, 0, %0, c7, c14, 0\n" - /* WFI */ - "mov %0, #0\n" - "mcr p15, 0, %0, c7, c0, 4\n" - "nop\n" "nop\n" "nop\n" "nop\n" - "nop\n" "nop\n" "nop\n" - /* enable I and D cache */ - "mrc p15, 0, %0, c1, c0, 0\n" - "orr %0, %0, #0x00001000\n" - "orr %0, %0, #0x00000004\n" - "mcr p15, 0, %0, c1, c0, 0\n" - : "=r" (reg)); + + if (!need_resched()) + __asm__ __volatile__( + /* disable I and D cache */ + "mrc p15, 0, %0, c1, c0, 0\n" + "bic %0, %0, #0x00001000\n" + "bic %0, %0, #0x00000004\n" + "mcr p15, 0, %0, c1, c0, 0\n" + /* invalidate I cache */ + "mov %0, #0\n" + "mcr p15, 0, %0, c7, c5, 0\n" + /* clear and invalidate D cache */ + "mov %0, #0\n" + "mcr p15, 0, %0, c7, c14, 0\n" + /* WFI */ + "mov %0, #0\n" + "mcr p15, 0, %0, c7, c0, 4\n" + "nop\n" "nop\n" "nop\n" "nop\n" + "nop\n" "nop\n" "nop\n" + /* enable I and D cache */ + "mrc p15, 0, %0, c1, c0, 0\n" + "orr %0, %0, #0x00001000\n" + "orr %0, %0, #0x00000004\n" + "mcr p15, 0, %0, c1, c0, 0\n" + : "=r" (reg)); + local_irq_enable(); } static void __iomem *imx3_ioremap(unsigned long phys_addr, size_t size, @@ -108,6 +111,7 @@ void imx3_init_l2x0(void) l2x0_init(l2x0_base, 0x00030024, 0x00000000); } +#ifdef CONFIG_SOC_IMX31 static struct map_desc mx31_io_desc[] __initdata = { imx_map_entry(MX31, X_MEMC, MT_DEVICE), imx_map_entry(MX31, AVIC, MT_DEVICE_NONSHARED), @@ -126,33 +130,11 @@ void __init mx31_map_io(void) iotable_init(mx31_io_desc, ARRAY_SIZE(mx31_io_desc)); } -static struct map_desc mx35_io_desc[] __initdata = { - imx_map_entry(MX35, X_MEMC, MT_DEVICE), - imx_map_entry(MX35, AVIC, MT_DEVICE_NONSHARED), - imx_map_entry(MX35, AIPS1, MT_DEVICE_NONSHARED), - imx_map_entry(MX35, AIPS2, MT_DEVICE_NONSHARED), - imx_map_entry(MX35, SPBA0, MT_DEVICE_NONSHARED), -}; - -void __init mx35_map_io(void) -{ - iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc)); -} - void __init imx31_init_early(void) { mxc_set_cpu_type(MXC_CPU_MX31); mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR)); - imx_idle = imx3_idle; - imx_ioremap = imx3_ioremap; -} - -void __init imx35_init_early(void) -{ - mxc_set_cpu_type(MXC_CPU_MX35); - mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR)); - mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR)); - imx_idle = imx3_idle; + pm_idle = imx3_idle; imx_ioremap = imx3_ioremap; } @@ -161,11 +143,6 @@ void __init mx31_init_irq(void) mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR)); } -void __init mx35_init_irq(void) -{ - mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR)); -} - static struct sdma_script_start_addrs imx31_to1_sdma_script __initdata = { .per_2_per_addr = 1677, }; @@ -199,6 +176,35 @@ void __init imx31_soc_init(void) imx_add_imx_sdma("imx31-sdma", MX31_SDMA_BASE_ADDR, MX31_INT_SDMA, &imx31_sdma_pdata); } +#endif /* ifdef CONFIG_SOC_IMX31 */ + +#ifdef CONFIG_SOC_IMX35 +static struct map_desc mx35_io_desc[] __initdata = { + imx_map_entry(MX35, X_MEMC, MT_DEVICE), + imx_map_entry(MX35, AVIC, MT_DEVICE_NONSHARED), + imx_map_entry(MX35, AIPS1, MT_DEVICE_NONSHARED), + imx_map_entry(MX35, AIPS2, MT_DEVICE_NONSHARED), + imx_map_entry(MX35, SPBA0, MT_DEVICE_NONSHARED), +}; + +void __init mx35_map_io(void) +{ + iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc)); +} + +void __init imx35_init_early(void) +{ + mxc_set_cpu_type(MXC_CPU_MX35); + mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR)); + mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR)); + pm_idle = imx3_idle; + imx_ioremap = imx3_ioremap; +} + +void __init mx35_init_irq(void) +{ + mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR)); +} static struct sdma_script_start_addrs imx35_to1_sdma_script __initdata = { .ap_2_ap_addr = 642, @@ -254,3 +260,4 @@ void __init imx35_soc_init(void) imx_add_imx_sdma("imx35-sdma", MX35_SDMA_BASE_ADDR, MX35_INT_SDMA, &imx35_sdma_pdata); } +#endif /* ifdef CONFIG_SOC_IMX35 */ diff --git a/arch/arm/mach-imx/src.c b/arch/arm/mach-imx/src.c index 36cacbd0dcc..a8e33681b73 100644 --- a/arch/arm/mach-imx/src.c +++ b/arch/arm/mach-imx/src.c @@ -14,6 +14,7 @@ #include <linux/io.h> #include <linux/of.h> #include <linux/of_address.h> +#include <linux/smp.h> #include <asm/unified.h> #define SRC_SCR 0x000 @@ -23,10 +24,15 @@ static void __iomem *src_base; +#ifndef CONFIG_SMP +#define cpu_logical_map(cpu) 0 +#endif + void imx_enable_cpu(int cpu, bool enable) { u32 mask, val; + cpu = cpu_logical_map(cpu); mask = 1 << (BP_SRC_SCR_CORE1_ENABLE + cpu - 1); val = readl_relaxed(src_base + SRC_SCR); val = enable ? val | mask : val & ~mask; @@ -35,6 +41,7 @@ void imx_enable_cpu(int cpu, bool enable) void imx_set_cpu_jump(int cpu, void *jump_addr) { + cpu = cpu_logical_map(cpu); writel_relaxed(BSYM(virt_to_phys(jump_addr)), src_base + SRC_GPR1 + cpu * 8); } diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c index 69156568bc4..4665767a4f7 100644 --- a/arch/arm/mach-mmp/gplugd.c +++ b/arch/arm/mach-mmp/gplugd.c @@ -182,7 +182,7 @@ static void __init gplugd_init(void) /* on-chip devices */ pxa168_add_uart(3); - pxa168_add_ssp(0); + pxa168_add_ssp(1); pxa168_add_twsi(0, NULL, ARRAY_AND_SIZE(gplugd_i2c_board_info)); pxa168_add_eth(&gplugd_eth_platform_data); diff --git a/arch/arm/mach-mmp/include/mach/gpio-pxa.h b/arch/arm/mach-mmp/include/mach/gpio-pxa.h index d14eeaf1632..99b4ce1b656 100644 --- a/arch/arm/mach-mmp/include/mach/gpio-pxa.h +++ b/arch/arm/mach-mmp/include/mach/gpio-pxa.h @@ -7,7 +7,7 @@ #define GPIO_REGS_VIRT (APB_VIRT_BASE + 0x19000) #define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2)) -#define GPIO_REG(x) (GPIO_REGS_VIRT + (x)) +#define GPIO_REG(x) (*(volatile u32 *)(GPIO_REGS_VIRT + (x))) #define NR_BUILTIN_GPIO IRQ_GPIO_NUM diff --git a/arch/arm/mach-mx5/cpu.c b/arch/arm/mach-mx5/cpu.c index 5c5328257dc..5e2e7a84386 100644 --- a/arch/arm/mach-mx5/cpu.c +++ b/arch/arm/mach-mx5/cpu.c @@ -16,7 +16,7 @@ #include <linux/init.h> #include <linux/module.h> #include <mach/hardware.h> -#include <asm/io.h> +#include <linux/io.h> static int mx5_cpu_rev = -1; @@ -67,7 +67,8 @@ static int __init mx51_neon_fixup(void) if (!cpu_is_mx51()) return 0; - if (mx51_revision() < IMX_CHIP_REVISION_3_0 && (elf_hwcap & HWCAP_NEON)) { + if (mx51_revision() < IMX_CHIP_REVISION_3_0 && + (elf_hwcap & HWCAP_NEON)) { elf_hwcap &= ~HWCAP_NEON; pr_info("Turning off NEON support, detected broken NEON implementation\n"); } diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-mx5/mm.c index 26eacc9d0d9..df4a508f240 100644 --- a/arch/arm/mach-mx5/mm.c +++ b/arch/arm/mach-mx5/mm.c @@ -23,7 +23,9 @@ static void imx5_idle(void) { - mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF); + if (!need_resched()) + mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF); + local_irq_enable(); } /* @@ -89,7 +91,7 @@ void __init imx51_init_early(void) mxc_set_cpu_type(MXC_CPU_MX51); mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR)); mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR)); - imx_idle = imx5_idle; + pm_idle = imx5_idle; } void __init imx53_init_early(void) diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c index 229ae349421..da6e4aad177 100644 --- a/arch/arm/mach-mxs/clock-mx28.c +++ b/arch/arm/mach-mxs/clock-mx28.c @@ -404,7 +404,7 @@ static int name##_set_rate(struct clk *clk, unsigned long rate) \ reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr); \ reg &= ~BM_CLKCTRL_##dr##_DIV; \ reg |= div << BP_CLKCTRL_##dr##_DIV; \ - if (reg | (1 << clk->enable_shift)) { \ + if (reg & (1 << clk->enable_shift)) { \ pr_err("%s: clock is gated\n", __func__); \ return -EINVAL; \ } \ diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index e0a028161dd..73f287d6429 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -171,14 +171,6 @@ config MACH_OMAP_GENERIC comment "OMAP CPU Speed" depends on ARCH_OMAP1 -config OMAP_CLOCKS_SET_BY_BOOTLOADER - bool "OMAP clocks set by bootloader" - depends on ARCH_OMAP1 - help - Enable this option to prevent the kernel from overriding the clock - frequencies programmed by bootloader for MPU, DSP, MMUs, TC, - internal LCD controller and MPU peripherals. - config OMAP_ARM_216MHZ bool "OMAP ARM 216 MHz CPU (1710 only)" depends on ARCH_OMAP1 && ARCH_OMAP16XX diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 51bae31cf36..b0f15d234a1 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -302,8 +302,6 @@ static void __init ams_delta_init(void) omap_cfg_reg(J19_1610_CAM_D6); omap_cfg_reg(J18_1610_CAM_D7); - iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc)); - omap_board_config = ams_delta_config; omap_board_config_size = ARRAY_SIZE(ams_delta_config); omap_serial_init(); @@ -373,10 +371,16 @@ static int __init ams_delta_modem_init(void) } arch_initcall(ams_delta_modem_init); +static void __init ams_delta_map_io(void) +{ + omap15xx_map_io(); + iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc)); +} + MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)") /* Maintainer: Jonathan McDowell <noodles@earth.li> */ .atag_offset = 0x100, - .map_io = omap15xx_map_io, + .map_io = ams_delta_map_io, .init_early = omap1_init_early, .reserve = omap_reserve, .init_irq = omap1_init_irq, diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h index eaf09efb91c..16b1423b454 100644 --- a/arch/arm/mach-omap1/clock.h +++ b/arch/arm/mach-omap1/clock.h @@ -17,7 +17,8 @@ #include <plat/clock.h> -extern int __init omap1_clk_init(void); +int omap1_clk_init(void); +void omap1_clk_late_init(void); extern int omap1_clk_enable(struct clk *clk); extern void omap1_clk_disable(struct clk *clk); extern long omap1_clk_round_rate(struct clk *clk, unsigned long rate); diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c index 92400b9eb69..1297bb58869 100644 --- a/arch/arm/mach-omap1/clock_data.c +++ b/arch/arm/mach-omap1/clock_data.c @@ -767,6 +767,15 @@ static struct clk_functions omap1_clk_functions = { .clk_disable_unused = omap1_clk_disable_unused, }; +static void __init omap1_show_rates(void) +{ + pr_notice("Clocking rate (xtal/DPLL1/MPU): " + "%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n", + ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10, + ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10, + arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10); +} + int __init omap1_clk_init(void) { struct omap_clk *c; @@ -835,9 +844,12 @@ int __init omap1_clk_init(void) /* We want to be in syncronous scalable mode */ omap_writew(0x1000, ARM_SYSST); -#ifdef CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER - /* Use values set by bootloader. Determine PLL rate and recalculate - * dependent clocks as if kernel had changed PLL or divisors. + + /* + * Initially use the values set by bootloader. Determine PLL rate and + * recalculate dependent clocks as if kernel had changed PLL or + * divisors. See also omap1_clk_late_init() that can reprogram dpll1 + * after the SRAM is initialized. */ { unsigned pll_ctl_val = omap_readw(DPLL_CTL); @@ -862,25 +874,10 @@ int __init omap1_clk_init(void) } } } -#else - /* Find the highest supported frequency and enable it */ - if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) { - printk(KERN_ERR "System frequencies not set. Check your config.\n"); - /* Guess sane values (60MHz) */ - omap_writew(0x2290, DPLL_CTL); - omap_writew(cpu_is_omap7xx() ? 0x3005 : 0x1005, ARM_CKCTL); - ck_dpll1.rate = 60000000; - } -#endif propagate_rate(&ck_dpll1); /* Cache rates for clocks connected to ck_ref (not dpll1) */ propagate_rate(&ck_ref); - printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): " - "%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n", - ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10, - ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10, - arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10); - + omap1_show_rates(); if (machine_is_omap_perseus2() || machine_is_omap_fsample()) { /* Select slicer output as OMAP input clock */ omap_writew(omap_readw(OMAP7XX_PCC_UPLD_CTRL) & ~0x1, @@ -925,3 +922,21 @@ int __init omap1_clk_init(void) return 0; } + +#define OMAP1_DPLL1_SANE_VALUE 60000000 + +void __init omap1_clk_late_init(void) +{ + if (ck_dpll1.rate >= OMAP1_DPLL1_SANE_VALUE) + return; + + /* Find the highest supported frequency and enable it */ + if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) { + pr_err("System frequencies not set, using default. Check your config.\n"); + omap_writew(0x2290, DPLL_CTL); + omap_writew(cpu_is_omap7xx() ? 0x3005 : 0x1005, ARM_CKCTL); + ck_dpll1.rate = OMAP1_DPLL1_SANE_VALUE; + } + propagate_rate(&ck_dpll1); + omap1_show_rates(); +} diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index 48ef9888e82..475cb2f50d8 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -30,6 +30,8 @@ #include <plat/omap7xx.h> #include <plat/mcbsp.h> +#include "clock.h" + /*-------------------------------------------------------------------------*/ #if defined(CONFIG_RTC_DRV_OMAP) || defined(CONFIG_RTC_DRV_OMAP_MODULE) @@ -293,6 +295,7 @@ static int __init omap1_init_devices(void) return -ENODEV; omap_sram_init(); + omap1_clk_late_init(); /* please keep these calls, and their implementations above, * in alphabetical order so they're easier to sort through. diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 50341471890..e1293aa513d 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -334,6 +334,7 @@ config MACH_OMAP4_PANDA config OMAP3_EMU bool "OMAP3 debugging peripherals" depends on ARCH_OMAP3 + select ARM_AMBA select OC_ETM help Say Y here to enable debugging hardware of omap3 diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 69ab1c06913..b009f17dee5 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -4,7 +4,7 @@ # Common support obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \ - common.o gpio.o dma.o wd_timer.o + common.o gpio.o dma.o wd_timer.o display.o omap-2-3-common = irq.o sdrc.o hwmod-common = omap_hwmod.o \ @@ -264,7 +264,4 @@ smsc911x-$(CONFIG_SMSC911X) := gpmc-smsc911x.o obj-y += $(smsc911x-m) $(smsc911x-y) obj-$(CONFIG_ARCH_OMAP4) += hwspinlock.o -disp-$(CONFIG_OMAP2_DSS) := display.o -obj-y += $(disp-m) $(disp-y) - obj-y += common-board-devices.o twl-common.o diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index 1fe35c24fba..942bb4f19f9 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -24,6 +24,7 @@ #include <linux/sched.h> #include <linux/cpuidle.h> +#include <linux/export.h> #include <plat/prcm.h> #include <plat/irqs.h> diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index adb2756e242..dce9905d64b 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -27,8 +27,35 @@ #include <plat/omap_hwmod.h> #include <plat/omap_device.h> #include <plat/omap-pm.h> +#include <plat/common.h> #include "control.h" +#include "display.h" + +#define DISPC_CONTROL 0x0040 +#define DISPC_CONTROL2 0x0238 +#define DISPC_IRQSTATUS 0x0018 + +#define DSS_SYSCONFIG 0x10 +#define DSS_SYSSTATUS 0x14 +#define DSS_CONTROL 0x40 +#define DSS_SDI_CONTROL 0x44 +#define DSS_PLL_CONTROL 0x48 + +#define LCD_EN_MASK (0x1 << 0) +#define DIGIT_EN_MASK (0x1 << 1) + +#define FRAMEDONE_IRQ_SHIFT 0 +#define EVSYNC_EVEN_IRQ_SHIFT 2 +#define EVSYNC_ODD_IRQ_SHIFT 3 +#define FRAMEDONE2_IRQ_SHIFT 22 +#define FRAMEDONETV_IRQ_SHIFT 24 + +/* + * FRAMEDONE_IRQ_TIMEOUT: how long (in milliseconds) to wait during DISPC + * reset before deciding that something has gone wrong + */ +#define FRAMEDONE_IRQ_TIMEOUT 100 static struct platform_device omap_display_device = { .name = "omapdss", @@ -172,3 +199,135 @@ int __init omap_display_init(struct omap_dss_board_info *board_data) return r; } + +static void dispc_disable_outputs(void) +{ + u32 v, irq_mask = 0; + bool lcd_en, digit_en, lcd2_en = false; + int i; + struct omap_dss_dispc_dev_attr *da; + struct omap_hwmod *oh; + + oh = omap_hwmod_lookup("dss_dispc"); + if (!oh) { + WARN(1, "display: could not disable outputs during reset - could not find dss_dispc hwmod\n"); + return; + } + + if (!oh->dev_attr) { + pr_err("display: could not disable outputs during reset due to missing dev_attr\n"); + return; + } + + da = (struct omap_dss_dispc_dev_attr *)oh->dev_attr; + + /* store value of LCDENABLE and DIGITENABLE bits */ + v = omap_hwmod_read(oh, DISPC_CONTROL); + lcd_en = v & LCD_EN_MASK; + digit_en = v & DIGIT_EN_MASK; + + /* store value of LCDENABLE for LCD2 */ + if (da->manager_count > 2) { + v = omap_hwmod_read(oh, DISPC_CONTROL2); + lcd2_en = v & LCD_EN_MASK; + } + + if (!(lcd_en | digit_en | lcd2_en)) + return; /* no managers currently enabled */ + + /* + * If any manager was enabled, we need to disable it before + * DSS clocks are disabled or DISPC module is reset + */ + if (lcd_en) + irq_mask |= 1 << FRAMEDONE_IRQ_SHIFT; + + if (digit_en) { + if (da->has_framedonetv_irq) { + irq_mask |= 1 << FRAMEDONETV_IRQ_SHIFT; + } else { + irq_mask |= 1 << EVSYNC_EVEN_IRQ_SHIFT | + 1 << EVSYNC_ODD_IRQ_SHIFT; + } + } + + if (lcd2_en) + irq_mask |= 1 << FRAMEDONE2_IRQ_SHIFT; + + /* + * clear any previous FRAMEDONE, FRAMEDONETV, + * EVSYNC_EVEN/ODD or FRAMEDONE2 interrupts + */ + omap_hwmod_write(irq_mask, oh, DISPC_IRQSTATUS); + + /* disable LCD and TV managers */ + v = omap_hwmod_read(oh, DISPC_CONTROL); + v &= ~(LCD_EN_MASK | DIGIT_EN_MASK); + omap_hwmod_write(v, oh, DISPC_CONTROL); + + /* disable LCD2 manager */ + if (da->manager_count > 2) { + v = omap_hwmod_read(oh, DISPC_CONTROL2); + v &= ~LCD_EN_MASK; + omap_hwmod_write(v, oh, DISPC_CONTROL2); + } + + i = 0; + while ((omap_hwmod_read(oh, DISPC_IRQSTATUS) & irq_mask) != + irq_mask) { + i++; + if (i > FRAMEDONE_IRQ_TIMEOUT) { + pr_err("didn't get FRAMEDONE1/2 or TV interrupt\n"); + break; + } + mdelay(1); + } +} + +#define MAX_MODULE_SOFTRESET_WAIT 10000 +int omap_dss_reset(struct omap_hwmod *oh) +{ + struct omap_hwmod_opt_clk *oc; + int c = 0; + int i, r; + + if (!(oh->class->sysc->sysc_flags & SYSS_HAS_RESET_STATUS)) { + pr_err("dss_core: hwmod data doesn't contain reset data\n"); + return -EINVAL; + } + + for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++) + if (oc->_clk) + clk_enable(oc->_clk); + + dispc_disable_outputs(); + + /* clear SDI registers */ + if (cpu_is_omap3430()) { + omap_hwmod_write(0x0, oh, DSS_SDI_CONTROL); + omap_hwmod_write(0x0, oh, DSS_PLL_CONTROL); + } + + /* + * clear DSS_CONTROL register to switch DSS clock sources to + * PRCM clock, if any + */ + omap_hwmod_write(0x0, oh, DSS_CONTROL); + + omap_test_timeout((omap_hwmod_read(oh, oh->class->sysc->syss_offs) + & SYSS_RESETDONE_MASK), + MAX_MODULE_SOFTRESET_WAIT, c); + + if (c == MAX_MODULE_SOFTRESET_WAIT) + pr_warning("dss_core: waiting for reset to finish failed\n"); + else + pr_debug("dss_core: softreset done\n"); + + for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++) + if (oc->_clk) + clk_disable(oc->_clk); + + r = (c == MAX_MODULE_SOFTRESET_WAIT) ? -ETIMEDOUT : 0; + + return r; +} diff --git a/arch/arm/mach-omap2/display.h b/arch/arm/mach-omap2/display.h new file mode 100644 index 00000000000..b871b017b35 --- /dev/null +++ b/arch/arm/mach-omap2/display.h @@ -0,0 +1,29 @@ +/* + * display.h - OMAP2+ integration-specific DSS header + * + * Copyright (C) 2011 Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef __ARCH_ARM_MACH_OMAP2_DISPLAY_H +#define __ARCH_ARM_MACH_OMAP2_DISPLAY_H + +#include <linux/kernel.h> + +struct omap_dss_dispc_dev_attr { + u8 manager_count; + bool has_framedonetv_irq; +}; + +#endif diff --git a/arch/arm/mach-omap2/io.h b/arch/arm/mach-omap2/io.h deleted file mode 100644 index e69de29bb2d..00000000000 --- a/arch/arm/mach-omap2/io.h +++ /dev/null diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 6b3088db83b..207a2ff9a8c 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -749,7 +749,7 @@ static int _count_mpu_irqs(struct omap_hwmod *oh) ohii = &oh->mpu_irqs[i++]; } while (ohii->irq != -1); - return i; + return i-1; } /** @@ -772,7 +772,7 @@ static int _count_sdma_reqs(struct omap_hwmod *oh) ohdi = &oh->sdma_reqs[i++]; } while (ohdi->dma_req != -1); - return i; + return i-1; } /** @@ -795,7 +795,7 @@ static int _count_ocp_if_addr_spaces(struct omap_hwmod_ocp_if *os) mem = &os->addr[i++]; } while (mem->pa_start != mem->pa_end); - return i; + return i-1; } /** diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index 6d720621352..a5409ce3f32 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -875,6 +875,10 @@ static struct omap_hwmod_ocp_if *omap2420_dss_slaves[] = { }; static struct omap_hwmod_opt_clk dss_opt_clks[] = { + /* + * The DSS HW needs all DSS clocks enabled during reset. The dss_core + * driver does not use these clocks. + */ { .role = "tv_clk", .clk = "dss_54m_fck" }, { .role = "sys_clk", .clk = "dss2_fck" }, }; @@ -899,7 +903,7 @@ static struct omap_hwmod omap2420_dss_core_hwmod = { .slaves_cnt = ARRAY_SIZE(omap2420_dss_slaves), .masters = omap2420_dss_masters, .masters_cnt = ARRAY_SIZE(omap2420_dss_masters), - .flags = HWMOD_NO_IDLEST, + .flags = HWMOD_NO_IDLEST | HWMOD_CONTROL_OPT_CLKS_IN_RESET, }; /* l4_core -> dss_dispc */ @@ -939,6 +943,7 @@ static struct omap_hwmod omap2420_dss_dispc_hwmod = { .slaves = omap2420_dss_dispc_slaves, .slaves_cnt = ARRAY_SIZE(omap2420_dss_dispc_slaves), .flags = HWMOD_NO_IDLEST, + .dev_attr = &omap2_3_dss_dispc_dev_attr }; /* l4_core -> dss_rfbi */ @@ -961,6 +966,10 @@ static struct omap_hwmod_ocp_if *omap2420_dss_rfbi_slaves[] = { &omap2420_l4_core__dss_rfbi, }; +static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = { + { .role = "ick", .clk = "dss_ick" }, +}; + static struct omap_hwmod omap2420_dss_rfbi_hwmod = { .name = "dss_rfbi", .class = &omap2_rfbi_hwmod_class, @@ -972,6 +981,8 @@ static struct omap_hwmod omap2420_dss_rfbi_hwmod = { .module_offs = CORE_MOD, }, }, + .opt_clks = dss_rfbi_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(dss_rfbi_opt_clks), .slaves = omap2420_dss_rfbi_slaves, .slaves_cnt = ARRAY_SIZE(omap2420_dss_rfbi_slaves), .flags = HWMOD_NO_IDLEST, @@ -981,7 +992,7 @@ static struct omap_hwmod omap2420_dss_rfbi_hwmod = { static struct omap_hwmod_ocp_if omap2420_l4_core__dss_venc = { .master = &omap2420_l4_core_hwmod, .slave = &omap2420_dss_venc_hwmod, - .clk = "dss_54m_fck", + .clk = "dss_ick", .addr = omap2_dss_venc_addrs, .fw = { .omap2 = { @@ -1001,7 +1012,7 @@ static struct omap_hwmod_ocp_if *omap2420_dss_venc_slaves[] = { static struct omap_hwmod omap2420_dss_venc_hwmod = { .name = "dss_venc", .class = &omap2_venc_hwmod_class, - .main_clk = "dss1_fck", + .main_clk = "dss_54m_fck", .prcm = { .omap2 = { .prcm_reg_id = 1, diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index a2580d01c3f..c4f56cb60d7 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -942,6 +942,10 @@ static struct omap_hwmod_ocp_if *omap2430_dss_slaves[] = { }; static struct omap_hwmod_opt_clk dss_opt_clks[] = { + /* + * The DSS HW needs all DSS clocks enabled during reset. The dss_core + * driver does not use these clocks. + */ { .role = "tv_clk", .clk = "dss_54m_fck" }, { .role = "sys_clk", .clk = "dss2_fck" }, }; @@ -966,7 +970,7 @@ static struct omap_hwmod omap2430_dss_core_hwmod = { .slaves_cnt = ARRAY_SIZE(omap2430_dss_slaves), .masters = omap2430_dss_masters, .masters_cnt = ARRAY_SIZE(omap2430_dss_masters), - .flags = HWMOD_NO_IDLEST, + .flags = HWMOD_NO_IDLEST | HWMOD_CONTROL_OPT_CLKS_IN_RESET, }; /* l4_core -> dss_dispc */ @@ -1000,6 +1004,7 @@ static struct omap_hwmod omap2430_dss_dispc_hwmod = { .slaves = omap2430_dss_dispc_slaves, .slaves_cnt = ARRAY_SIZE(omap2430_dss_dispc_slaves), .flags = HWMOD_NO_IDLEST, + .dev_attr = &omap2_3_dss_dispc_dev_attr }; /* l4_core -> dss_rfbi */ @@ -1016,6 +1021,10 @@ static struct omap_hwmod_ocp_if *omap2430_dss_rfbi_slaves[] = { &omap2430_l4_core__dss_rfbi, }; +static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = { + { .role = "ick", .clk = "dss_ick" }, +}; + static struct omap_hwmod omap2430_dss_rfbi_hwmod = { .name = "dss_rfbi", .class = &omap2_rfbi_hwmod_class, @@ -1027,6 +1036,8 @@ static struct omap_hwmod omap2430_dss_rfbi_hwmod = { .module_offs = CORE_MOD, }, }, + .opt_clks = dss_rfbi_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(dss_rfbi_opt_clks), .slaves = omap2430_dss_rfbi_slaves, .slaves_cnt = ARRAY_SIZE(omap2430_dss_rfbi_slaves), .flags = HWMOD_NO_IDLEST, @@ -1036,7 +1047,7 @@ static struct omap_hwmod omap2430_dss_rfbi_hwmod = { static struct omap_hwmod_ocp_if omap2430_l4_core__dss_venc = { .master = &omap2430_l4_core_hwmod, .slave = &omap2430_dss_venc_hwmod, - .clk = "dss_54m_fck", + .clk = "dss_ick", .addr = omap2_dss_venc_addrs, .flags = OCPIF_SWSUP_IDLE, .user = OCP_USER_MPU | OCP_USER_SDMA, @@ -1050,7 +1061,7 @@ static struct omap_hwmod_ocp_if *omap2430_dss_venc_slaves[] = { static struct omap_hwmod omap2430_dss_venc_hwmod = { .name = "dss_venc", .class = &omap2_venc_hwmod_class, - .main_clk = "dss1_fck", + .main_clk = "dss_54m_fck", .prcm = { .omap2 = { .prcm_reg_id = 1, diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c index c451729d289..c11273da5dc 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c @@ -11,6 +11,7 @@ #include <plat/omap_hwmod.h> #include <plat/serial.h> #include <plat/dma.h> +#include <plat/common.h> #include <mach/irqs.h> @@ -43,13 +44,15 @@ static struct omap_hwmod_class_sysconfig omap2_dss_sysc = { .rev_offs = 0x0000, .sysc_offs = 0x0010, .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), + .sysc_flags = (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE | + SYSS_HAS_RESET_STATUS), .sysc_fields = &omap_hwmod_sysc_type1, }; struct omap_hwmod_class omap2_dss_hwmod_class = { .name = "dss", .sysc = &omap2_dss_sysc, + .reset = omap_dss_reset, }; /* diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index bc9035ec87f..7f8915ad509 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -1369,9 +1369,14 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_slaves[] = { }; static struct omap_hwmod_opt_clk dss_opt_clks[] = { - { .role = "tv_clk", .clk = "dss_tv_fck" }, - { .role = "video_clk", .clk = "dss_96m_fck" }, + /* + * The DSS HW needs all DSS clocks enabled during reset. The dss_core + * driver does not use these clocks. + */ { .role = "sys_clk", .clk = "dss2_alwon_fck" }, + { .role = "tv_clk", .clk = "dss_tv_fck" }, + /* required only on OMAP3430 */ + { .role = "tv_dac_clk", .clk = "dss_96m_fck" }, }; static struct omap_hwmod omap3430es1_dss_core_hwmod = { @@ -1394,11 +1399,12 @@ static struct omap_hwmod omap3430es1_dss_core_hwmod = { .slaves_cnt = ARRAY_SIZE(omap3430es1_dss_slaves), .masters = omap3xxx_dss_masters, .masters_cnt = ARRAY_SIZE(omap3xxx_dss_masters), - .flags = HWMOD_NO_IDLEST, + .flags = HWMOD_NO_IDLEST | HWMOD_CONTROL_OPT_CLKS_IN_RESET, }; static struct omap_hwmod omap3xxx_dss_core_hwmod = { .name = "dss_core", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .class = &omap2_dss_hwmod_class, .main_clk = "dss1_alwon_fck", /* instead of dss_fck */ .sdma_reqs = omap3xxx_dss_sdma_chs, @@ -1456,6 +1462,7 @@ static struct omap_hwmod omap3xxx_dss_dispc_hwmod = { .slaves = omap3xxx_dss_dispc_slaves, .slaves_cnt = ARRAY_SIZE(omap3xxx_dss_dispc_slaves), .flags = HWMOD_NO_IDLEST, + .dev_attr = &omap2_3_dss_dispc_dev_attr }; /* @@ -1486,6 +1493,7 @@ static struct omap_hwmod_addr_space omap3xxx_dss_dsi1_addrs[] = { static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_dsi1 = { .master = &omap3xxx_l4_core_hwmod, .slave = &omap3xxx_dss_dsi1_hwmod, + .clk = "dss_ick", .addr = omap3xxx_dss_dsi1_addrs, .fw = { .omap2 = { @@ -1502,6 +1510,10 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_dsi1_slaves[] = { &omap3xxx_l4_core__dss_dsi1, }; +static struct omap_hwmod_opt_clk dss_dsi1_opt_clks[] = { + { .role = "sys_clk", .clk = "dss2_alwon_fck" }, +}; + static struct omap_hwmod omap3xxx_dss_dsi1_hwmod = { .name = "dss_dsi1", .class = &omap3xxx_dsi_hwmod_class, @@ -1514,6 +1526,8 @@ static struct omap_hwmod omap3xxx_dss_dsi1_hwmod = { .module_offs = OMAP3430_DSS_MOD, }, }, + .opt_clks = dss_dsi1_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(dss_dsi1_opt_clks), .slaves = omap3xxx_dss_dsi1_slaves, .slaves_cnt = ARRAY_SIZE(omap3xxx_dss_dsi1_slaves), .flags = HWMOD_NO_IDLEST, @@ -1540,6 +1554,10 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_rfbi_slaves[] = { &omap3xxx_l4_core__dss_rfbi, }; +static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = { + { .role = "ick", .clk = "dss_ick" }, +}; + static struct omap_hwmod omap3xxx_dss_rfbi_hwmod = { .name = "dss_rfbi", .class = &omap2_rfbi_hwmod_class, @@ -1551,6 +1569,8 @@ static struct omap_hwmod omap3xxx_dss_rfbi_hwmod = { .module_offs = OMAP3430_DSS_MOD, }, }, + .opt_clks = dss_rfbi_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(dss_rfbi_opt_clks), .slaves = omap3xxx_dss_rfbi_slaves, .slaves_cnt = ARRAY_SIZE(omap3xxx_dss_rfbi_slaves), .flags = HWMOD_NO_IDLEST, @@ -1560,7 +1580,7 @@ static struct omap_hwmod omap3xxx_dss_rfbi_hwmod = { static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_venc = { .master = &omap3xxx_l4_core_hwmod, .slave = &omap3xxx_dss_venc_hwmod, - .clk = "dss_tv_fck", + .clk = "dss_ick", .addr = omap2_dss_venc_addrs, .fw = { .omap2 = { @@ -1578,10 +1598,15 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_venc_slaves[] = { &omap3xxx_l4_core__dss_venc, }; +static struct omap_hwmod_opt_clk dss_venc_opt_clks[] = { + /* required only on OMAP3430 */ + { .role = "tv_dac_clk", .clk = "dss_96m_fck" }, +}; + static struct omap_hwmod omap3xxx_dss_venc_hwmod = { .name = "dss_venc", .class = &omap2_venc_hwmod_class, - .main_clk = "dss1_alwon_fck", + .main_clk = "dss_tv_fck", .prcm = { .omap2 = { .prcm_reg_id = 1, @@ -1589,6 +1614,8 @@ static struct omap_hwmod omap3xxx_dss_venc_hwmod = { .module_offs = OMAP3430_DSS_MOD, }, }, + .opt_clks = dss_venc_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(dss_venc_opt_clks), .slaves = omap3xxx_dss_venc_slaves, .slaves_cnt = ARRAY_SIZE(omap3xxx_dss_venc_slaves), .flags = HWMOD_NO_IDLEST, diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 7695e5d4331..daaf165af69 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -30,6 +30,7 @@ #include <plat/mmc.h> #include <plat/i2c.h> #include <plat/dmtimer.h> +#include <plat/common.h> #include "omap_hwmod_common_data.h" @@ -1187,6 +1188,7 @@ static struct omap_hwmod_class_sysconfig omap44xx_dss_sysc = { static struct omap_hwmod_class omap44xx_dss_hwmod_class = { .name = "dss", .sysc = &omap44xx_dss_sysc, + .reset = omap_dss_reset, }; /* dss */ @@ -1240,12 +1242,12 @@ static struct omap_hwmod_ocp_if *omap44xx_dss_slaves[] = { static struct omap_hwmod_opt_clk dss_opt_clks[] = { { .role = "sys_clk", .clk = "dss_sys_clk" }, { .role = "tv_clk", .clk = "dss_tv_clk" }, - { .role = "dss_clk", .clk = "dss_dss_clk" }, - { .role = "video_clk", .clk = "dss_48mhz_clk" }, + { .role = "hdmi_clk", .clk = "dss_48mhz_clk" }, }; static struct omap_hwmod omap44xx_dss_hwmod = { .name = "dss_core", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .class = &omap44xx_dss_hwmod_class, .clkdm_name = "l3_dss_clkdm", .main_clk = "dss_dss_clk", @@ -1325,6 +1327,11 @@ static struct omap_hwmod_addr_space omap44xx_dss_dispc_addrs[] = { { } }; +static struct omap_dss_dispc_dev_attr omap44xx_dss_dispc_dev_attr = { + .manager_count = 3, + .has_framedonetv_irq = 1 +}; + /* l4_per -> dss_dispc */ static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_dispc = { .master = &omap44xx_l4_per_hwmod, @@ -1340,12 +1347,6 @@ static struct omap_hwmod_ocp_if *omap44xx_dss_dispc_slaves[] = { &omap44xx_l4_per__dss_dispc, }; -static struct omap_hwmod_opt_clk dss_dispc_opt_clks[] = { - { .role = "sys_clk", .clk = "dss_sys_clk" }, - { .role = "tv_clk", .clk = "dss_tv_clk" }, - { .role = "hdmi_clk", .clk = "dss_48mhz_clk" }, -}; - static struct omap_hwmod omap44xx_dss_dispc_hwmod = { .name = "dss_dispc", .class = &omap44xx_dispc_hwmod_class, @@ -1359,10 +1360,9 @@ static struct omap_hwmod omap44xx_dss_dispc_hwmod = { .context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET, }, }, - .opt_clks = dss_dispc_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(dss_dispc_opt_clks), .slaves = omap44xx_dss_dispc_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_dss_dispc_slaves), + .dev_attr = &omap44xx_dss_dispc_dev_attr }; /* @@ -1624,7 +1624,7 @@ static struct omap_hwmod omap44xx_dss_hdmi_hwmod = { .clkdm_name = "l3_dss_clkdm", .mpu_irqs = omap44xx_dss_hdmi_irqs, .sdma_reqs = omap44xx_dss_hdmi_sdma_reqs, - .main_clk = "dss_dss_clk", + .main_clk = "dss_48mhz_clk", .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET, @@ -1785,7 +1785,7 @@ static struct omap_hwmod omap44xx_dss_venc_hwmod = { .name = "dss_venc", .class = &omap44xx_venc_hwmod_class, .clkdm_name = "l3_dss_clkdm", - .main_clk = "dss_dss_clk", + .main_clk = "dss_tv_clk", .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET, diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.c b/arch/arm/mach-omap2/omap_hwmod_common_data.c index de832ebc93a..51e5418899f 100644 --- a/arch/arm/mach-omap2/omap_hwmod_common_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_common_data.c @@ -49,3 +49,7 @@ struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2 = { .srst_shift = SYSC_TYPE2_SOFTRESET_SHIFT, }; +struct omap_dss_dispc_dev_attr omap2_3_dss_dispc_dev_attr = { + .manager_count = 2, + .has_framedonetv_irq = 0 +}; diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.h b/arch/arm/mach-omap2/omap_hwmod_common_data.h index 39a7c37f458..ad5d8f04c0b 100644 --- a/arch/arm/mach-omap2/omap_hwmod_common_data.h +++ b/arch/arm/mach-omap2/omap_hwmod_common_data.h @@ -16,6 +16,8 @@ #include <plat/omap_hwmod.h> +#include "display.h" + /* Common address space across OMAP2xxx */ extern struct omap_hwmod_addr_space omap2xxx_uart1_addr_space[]; extern struct omap_hwmod_addr_space omap2xxx_uart2_addr_space[]; @@ -111,4 +113,6 @@ extern struct omap_hwmod_class omap2xxx_dma_hwmod_class; extern struct omap_hwmod_class omap2xxx_mailbox_hwmod_class; extern struct omap_hwmod_class omap2xxx_mcspi_class; +extern struct omap_dss_dispc_dev_attr omap2_3_dss_dispc_dev_attr; + #endif diff --git a/arch/arm/mach-omap2/omap_l3_noc.c b/arch/arm/mach-omap2/omap_l3_noc.c index 6a66aa5e2a5..d15225ff5c4 100644 --- a/arch/arm/mach-omap2/omap_l3_noc.c +++ b/arch/arm/mach-omap2/omap_l3_noc.c @@ -237,7 +237,7 @@ static int __devexit omap4_l3_remove(struct platform_device *pdev) static const struct of_device_id l3_noc_match[] = { {.compatible = "ti,omap4-l3-noc", }, {}, -} +}; MODULE_DEVICE_TABLE(of, l3_noc_match); #else #define l3_noc_match NULL diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index 1e79bdf313e..00bff46ca48 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -24,6 +24,7 @@ #include "powerdomain.h" #include "clockdomain.h" #include "pm.h" +#include "twl-common.h" static struct omap_device_pm_latency *pm_lats; @@ -226,11 +227,8 @@ postcore_initcall(omap2_common_pm_init); static int __init omap2_common_pm_late_init(void) { - /* Init the OMAP TWL parameters */ - omap3_twl_init(); - omap4_twl_init(); - /* Init the voltage layer */ + omap_pmic_late_init(); omap_voltage_late_init(); /* Initialize the voltages */ diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c index 6a4f6839a7d..cf246b39bac 100644 --- a/arch/arm/mach-omap2/smartreflex.c +++ b/arch/arm/mach-omap2/smartreflex.c @@ -139,7 +139,7 @@ static irqreturn_t sr_interrupt(int irq, void *data) sr_write_reg(sr_info, ERRCONFIG_V1, status); } else if (sr_info->ip_type == SR_TYPE_V2) { /* Read the status bits */ - sr_read_reg(sr_info, IRQSTATUS); + status = sr_read_reg(sr_info, IRQSTATUS); /* Clear them by writing back */ sr_write_reg(sr_info, IRQSTATUS, status); diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index 52243577216..10b20c652e5 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -30,6 +30,7 @@ #include <plat/usb.h> #include "twl-common.h" +#include "pm.h" static struct i2c_board_info __initdata pmic_i2c_board_info = { .addr = 0x48, @@ -48,6 +49,16 @@ void __init omap_pmic_init(int bus, u32 clkrate, omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1); } +void __init omap_pmic_late_init(void) +{ + /* Init the OMAP TWL parameters (if PMIC has been registerd) */ + if (!pmic_i2c_board_info.irq) + return; + + omap3_twl_init(); + omap4_twl_init(); +} + #if defined(CONFIG_ARCH_OMAP3) static struct twl4030_usb_data omap3_usb_pdata = { .usb_mode = T2_USB_MODE_ULPI, diff --git a/arch/arm/mach-omap2/twl-common.h b/arch/arm/mach-omap2/twl-common.h index 5e83a5bd37f..275dde8cb27 100644 --- a/arch/arm/mach-omap2/twl-common.h +++ b/arch/arm/mach-omap2/twl-common.h @@ -1,6 +1,8 @@ #ifndef __OMAP_PMIC_COMMON__ #define __OMAP_PMIC_COMMON__ +#include <plat/irqs.h> + #define TWL_COMMON_PDATA_USB (1 << 0) #define TWL_COMMON_PDATA_BCI (1 << 1) #define TWL_COMMON_PDATA_MADC (1 << 2) @@ -30,6 +32,7 @@ struct twl4030_platform_data; void omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq, struct twl4030_platform_data *pmic_data); +void omap_pmic_late_init(void); static inline void omap2_pmic_init(const char *pmic_type, struct twl4030_platform_data *pmic_data) diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c index fc0b8544e17..4b81f59a4cb 100644 --- a/arch/arm/mach-pxa/balloon3.c +++ b/arch/arm/mach-pxa/balloon3.c @@ -307,7 +307,7 @@ static inline void balloon3_mmc_init(void) {} /****************************************************************************** * USB Gadget ******************************************************************************/ -#if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE) +#if defined(CONFIG_USB_PXA27X)||defined(CONFIG_USB_PXA27X_MODULE) static void balloon3_udc_command(int cmd) { if (cmd == PXA2XX_UDC_CMD_CONNECT) diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c index 692e1ffc558..d23b92b8048 100644 --- a/arch/arm/mach-pxa/colibri-pxa320.c +++ b/arch/arm/mach-pxa/colibri-pxa320.c @@ -146,7 +146,7 @@ static void __init colibri_pxa320_init_eth(void) static inline void __init colibri_pxa320_init_eth(void) {} #endif /* CONFIG_AX88796 */ -#if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE) +#if defined(CONFIG_USB_PXA27X)||defined(CONFIG_USB_PXA27X_MODULE) static struct gpio_vbus_mach_info colibri_pxa320_gpio_vbus_info = { .gpio_vbus = mfp_to_gpio(MFP_PIN_GPIO96), .gpio_pullup = -1, diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c index 9c8208ca041..ffdd70dad32 100644 --- a/arch/arm/mach-pxa/gumstix.c +++ b/arch/arm/mach-pxa/gumstix.c @@ -106,7 +106,7 @@ static void __init gumstix_mmc_init(void) } #endif -#ifdef CONFIG_USB_GADGET_PXA25X +#ifdef CONFIG_USB_PXA25X static struct gpio_vbus_mach_info gumstix_udc_info = { .gpio_vbus = GPIO_GUMSTIX_USB_GPIOn, .gpio_pullup = GPIO_GUMSTIX_USB_GPIOx, diff --git a/arch/arm/mach-pxa/include/mach/palm27x.h b/arch/arm/mach-pxa/include/mach/palm27x.h index f80bbe246af..d4eac3d6ffb 100644 --- a/arch/arm/mach-pxa/include/mach/palm27x.h +++ b/arch/arm/mach-pxa/include/mach/palm27x.h @@ -37,8 +37,8 @@ extern void __init palm27x_lcd_init(int power, #define palm27x_lcd_init(power, mode) do {} while (0) #endif -#if defined(CONFIG_USB_GADGET_PXA27X) || \ - defined(CONFIG_USB_GADGET_PXA27X_MODULE) +#if defined(CONFIG_USB_PXA27X) || \ + defined(CONFIG_USB_PXA27X_MODULE) extern void __init palm27x_udc_init(int vbus, int pullup, int vbus_inverted); #else diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c index 325c245c0a0..fbc10d7b95d 100644 --- a/arch/arm/mach-pxa/palm27x.c +++ b/arch/arm/mach-pxa/palm27x.c @@ -164,8 +164,8 @@ void __init palm27x_lcd_init(int power, struct pxafb_mode_info *mode) /****************************************************************************** * USB Gadget ******************************************************************************/ -#if defined(CONFIG_USB_GADGET_PXA27X) || \ - defined(CONFIG_USB_GADGET_PXA27X_MODULE) +#if defined(CONFIG_USB_PXA27X) || \ + defined(CONFIG_USB_PXA27X_MODULE) static struct gpio_vbus_mach_info palm27x_udc_info = { .gpio_vbus_inverted = 1, }; diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c index 6ec7caefb37..2c24c67fd92 100644 --- a/arch/arm/mach-pxa/palmtc.c +++ b/arch/arm/mach-pxa/palmtc.c @@ -338,7 +338,7 @@ static inline void palmtc_mkp_init(void) {} /****************************************************************************** * UDC ******************************************************************************/ -#if defined(CONFIG_USB_GADGET_PXA25X)||defined(CONFIG_USB_GADGET_PXA25X_MODULE) +#if defined(CONFIG_USB_PXA25X)||defined(CONFIG_USB_PXA25X_MODULE) static struct gpio_vbus_mach_info palmtc_udc_info = { .gpio_vbus = GPIO_NR_PALMTC_USB_DETECT_N, .gpio_vbus_inverted = 1, diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c index a7539a6ed1f..ca0c6615028 100644 --- a/arch/arm/mach-pxa/vpac270.c +++ b/arch/arm/mach-pxa/vpac270.c @@ -343,7 +343,7 @@ static inline void vpac270_uhc_init(void) {} /****************************************************************************** * USB Gadget ******************************************************************************/ -#if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE) +#if defined(CONFIG_USB_PXA27X)||defined(CONFIG_USB_PXA27X_MODULE) static struct gpio_vbus_mach_info vpac270_gpio_vbus_info = { .gpio_vbus = GPIO41_VPAC270_UDC_DETECT, .gpio_pullup = -1, diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c index 66668565ee7..f208154b138 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c @@ -8,7 +8,7 @@ * published by the Free Software Foundation. */ -#include <linux/module.h> +#include <linux/export.h> #include <linux/interrupt.h> #include <linux/i2c.h> diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h index 83b745a5e1b..c75f254abd8 100644 --- a/arch/arm/plat-mxc/include/mach/common.h +++ b/arch/arm/plat-mxc/include/mach/common.h @@ -85,7 +85,6 @@ enum mxc_cpu_pwr_mode { }; extern void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode); -extern void (*imx_idle)(void); extern void imx_print_silicon_rev(const char *cpu, int srev); void avic_handle_irq(struct pt_regs *); @@ -133,4 +132,5 @@ extern void imx53_qsb_common_init(void); extern void imx53_smd_common_init(void); extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode); extern void imx6q_pm_init(void); +extern void imx6q_clock_map_io(void); #endif diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h index 00a78193c68..a4d36d601d5 100644 --- a/arch/arm/plat-mxc/include/mach/mxc.h +++ b/arch/arm/plat-mxc/include/mach/mxc.h @@ -50,20 +50,6 @@ #define IMX_CHIP_REVISION_3_3 0x33 #define IMX_CHIP_REVISION_UNKNOWN 0xff -#define IMX_CHIP_REVISION_1_0_STRING "1.0" -#define IMX_CHIP_REVISION_1_1_STRING "1.1" -#define IMX_CHIP_REVISION_1_2_STRING "1.2" -#define IMX_CHIP_REVISION_1_3_STRING "1.3" -#define IMX_CHIP_REVISION_2_0_STRING "2.0" -#define IMX_CHIP_REVISION_2_1_STRING "2.1" -#define IMX_CHIP_REVISION_2_2_STRING "2.2" -#define IMX_CHIP_REVISION_2_3_STRING "2.3" -#define IMX_CHIP_REVISION_3_0_STRING "3.0" -#define IMX_CHIP_REVISION_3_1_STRING "3.1" -#define IMX_CHIP_REVISION_3_2_STRING "3.2" -#define IMX_CHIP_REVISION_3_3_STRING "3.3" -#define IMX_CHIP_REVISION_UNKNOWN_STRING "unknown" - #ifndef __ASSEMBLY__ extern unsigned int __mxc_cpu_type; #endif diff --git a/arch/arm/plat-mxc/include/mach/system.h b/arch/arm/plat-mxc/include/mach/system.h index cf88b3593fb..b9895d25016 100644 --- a/arch/arm/plat-mxc/include/mach/system.h +++ b/arch/arm/plat-mxc/include/mach/system.h @@ -17,14 +17,9 @@ #ifndef __ASM_ARCH_MXC_SYSTEM_H__ #define __ASM_ARCH_MXC_SYSTEM_H__ -extern void (*imx_idle)(void); - static inline void arch_idle(void) { - if (imx_idle != NULL) - (imx_idle)(); - else - cpu_do_idle(); + cpu_do_idle(); } void arch_reset(char mode, const char *cmd); diff --git a/arch/arm/plat-mxc/system.c b/arch/arm/plat-mxc/system.c index 9dad8dcc2ea..d65fb31a55c 100644 --- a/arch/arm/plat-mxc/system.c +++ b/arch/arm/plat-mxc/system.c @@ -21,6 +21,7 @@ #include <linux/io.h> #include <linux/err.h> #include <linux/delay.h> +#include <linux/module.h> #include <mach/hardware.h> #include <mach/common.h> @@ -28,8 +29,8 @@ #include <asm/system.h> #include <asm/mach-types.h> -void (*imx_idle)(void) = NULL; void __iomem *(*imx_ioremap)(unsigned long, size_t, unsigned int) = NULL; +EXPORT_SYMBOL_GPL(imx_ioremap); static void __iomem *wdog_base; diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h index 197ca03c3f7..eb73ab40e95 100644 --- a/arch/arm/plat-omap/include/plat/clock.h +++ b/arch/arm/plat-omap/include/plat/clock.h @@ -165,8 +165,8 @@ struct dpll_data { u8 auto_recal_bit; u8 recal_en_bit; u8 recal_st_bit; - u8 flags; # endif + u8 flags; }; #endif diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h index c50df4814f6..3ff3e36580f 100644 --- a/arch/arm/plat-omap/include/plat/common.h +++ b/arch/arm/plat-omap/include/plat/common.h @@ -30,6 +30,7 @@ #include <linux/delay.h> #include <plat/i2c.h> +#include <plat/omap_hwmod.h> struct sys_timer; @@ -55,6 +56,8 @@ void am35xx_init_early(void); void ti816x_init_early(void); void omap4430_init_early(void); +extern int omap_dss_reset(struct omap_hwmod *); + void omap_sram_init(void); /* diff --git a/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c b/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c index a9276667c2f..c7adad0e8de 100644 --- a/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c +++ b/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c @@ -12,7 +12,7 @@ */ #include <linux/init.h> -#include <linux/module.h> +#include <linux/export.h> #include <linux/interrupt.h> #include <linux/ioport.h> #include <linux/cpufreq.h> diff --git a/arch/arm/plat-s5p/sysmmu.c b/arch/arm/plat-s5p/sysmmu.c index e1cbc728c77..c8bec9c7655 100644 --- a/arch/arm/plat-s5p/sysmmu.c +++ b/arch/arm/plat-s5p/sysmmu.c @@ -11,6 +11,7 @@ #include <linux/io.h> #include <linux/interrupt.h> #include <linux/platform_device.h> +#include <linux/export.h> #include <asm/pgtable.h> diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h index d48245bb02b..df8155b9d4d 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-cfg.h +++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h @@ -24,6 +24,8 @@ #ifndef __PLAT_GPIO_CFG_H #define __PLAT_GPIO_CFG_H __FILE__ +#include<linux/types.h> + typedef unsigned int __bitwise__ samsung_gpio_pull_t; typedef unsigned int __bitwise__ s5p_gpio_drvstr_t; diff --git a/arch/arm/plat-samsung/pd.c b/arch/arm/plat-samsung/pd.c index efe1d564473..312b510d86b 100644 --- a/arch/arm/plat-samsung/pd.c +++ b/arch/arm/plat-samsung/pd.c @@ -11,7 +11,7 @@ */ #include <linux/init.h> -#include <linux/module.h> +#include <linux/export.h> #include <linux/platform_device.h> #include <linux/err.h> #include <linux/pm_runtime.h> diff --git a/arch/arm/plat-samsung/pwm.c b/arch/arm/plat-samsung/pwm.c index dc1185dcf80..c559d8438c7 100644 --- a/arch/arm/plat-samsung/pwm.c +++ b/arch/arm/plat-samsung/pwm.c @@ -11,7 +11,7 @@ * the Free Software Foundation; either version 2 of the License. */ -#include <linux/module.h> +#include <linux/export.h> #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/slab.h> diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index 5bdeef96984..ccbe16f4722 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -1123,5 +1123,6 @@ blissc MACH_BLISSC BLISSC 3491 thales_adc MACH_THALES_ADC THALES_ADC 3492 ubisys_p9d_evp MACH_UBISYS_P9D_EVP UBISYS_P9D_EVP 3493 atdgp318 MACH_ATDGP318 ATDGP318 3494 +m28evk MACH_M28EVK M28EVK 3613 smdk4212 MACH_SMDK4212 SMDK4212 3638 smdk4412 MACH_SMDK4412 SMDK4412 3765 |