summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/mach-sa1100/assabet.c40
-rw-r--r--arch/arm/mach-sa1100/collie.c17
-rw-r--r--arch/arm/mach-sa1100/generic.c8
-rw-r--r--arch/arm/mach-sa1100/generic.h3
-rw-r--r--arch/arm/mach-sa1100/h3100.c22
-rw-r--r--arch/arm/mach-sa1100/h3600.c31
-rw-r--r--arch/arm/mach-sa1100/lart.c79
-rw-r--r--arch/arm/mach-sa1100/shannon.c17
8 files changed, 212 insertions, 5 deletions
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index 0c4b76ab4d8..37fb0cd1a29 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -20,6 +20,8 @@
#include <linux/delay.h>
#include <linux/mm.h>
+#include <video/sa1100fb.h>
+
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
@@ -204,6 +206,39 @@ static struct mcp_plat_data assabet_mcp_data = {
.sclk_rate = 11981000,
};
+#ifndef ASSABET_PAL_VIDEO
+/*
+ * The assabet uses a sharp LQ039Q2DS54 LCD module. It is actually
+ * takes an RGB666 signal, but we provide it with an RGB565 signal
+ * instead (def_rgb_16).
+ */
+static struct sa1100fb_mach_info lq039q2ds54_info = {
+ .pixclock = 171521, .bpp = 16,
+ .xres = 320, .yres = 240,
+
+ .hsync_len = 5, .vsync_len = 1,
+ .left_margin = 61, .upper_margin = 3,
+ .right_margin = 9, .lower_margin = 0,
+
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+
+ .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+ .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
+};
+#else
+static struct sa1100fb_mach_info pal_info = {
+ .pixclock = 67797, .bpp = 16,
+ .xres = 640, .yres = 512,
+
+ .hsync_len = 64, .vsync_len = 6,
+ .left_margin = 125, .upper_margin = 70,
+ .right_margin = 115, .lower_margin = 36,
+
+ .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+ .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(512),
+};
+#endif
+
static void __init assabet_init(void)
{
/*
@@ -249,6 +284,11 @@ static void __init assabet_init(void)
#endif
}
+#ifndef ASSABET_PAL_VIDEO
+ sa11x0_register_lcd(&lq039q2ds54_info);
+#else
+ sa11x0_register_lcd(&pal_video);
+#endif
sa11x0_register_mtd(&assabet_flash_data, assabet_flash_resources,
ARRAY_SIZE(assabet_flash_resources));
sa11x0_register_irda(&assabet_irda_data);
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index fd5652118ed..70f6cdc9e63 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -28,6 +28,8 @@
#include <linux/gpio.h>
#include <linux/pda_power.h>
+#include <video/sa1100fb.h>
+
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
@@ -310,6 +312,20 @@ static struct resource collie_flash_resources[] = {
}
};
+static struct sa1100fb_mach_info collie_lcd_info = {
+ .pixclock = 171521, .bpp = 16,
+ .xres = 320, .yres = 240,
+
+ .hsync_len = 5, .vsync_len = 1,
+ .left_margin = 11, .upper_margin = 2,
+ .right_margin = 30, .lower_margin = 0,
+
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+
+ .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+ .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
+};
+
static void __init collie_init(void)
{
int ret = 0;
@@ -348,6 +364,7 @@ static void __init collie_init(void)
printk(KERN_WARNING "collie: Unable to register LoCoMo device\n");
}
+ sa11x0_register_lcd(&collie_lcd_info);
sa11x0_register_mtd(&collie_flash_data, collie_flash_resources,
ARRAY_SIZE(collie_flash_resources));
sa11x0_register_mcp(&collie_mcp_data);
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index bb10ee2cb89..f57808fb182 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -19,6 +19,8 @@
#include <linux/ioport.h>
#include <linux/platform_device.h>
+#include <video/sa1100fb.h>
+
#include <asm/div64.h>
#include <mach/hardware.h>
#include <asm/system.h>
@@ -294,6 +296,11 @@ static struct platform_device sa11x0fb_device = {
.resource = sa11x0fb_resources,
};
+void sa11x0_register_lcd(struct sa1100fb_mach_info *inf)
+{
+ sa11x0_register_device(&sa11x0fb_device, inf);
+}
+
static struct platform_device sa11x0pcmcia_device = {
.name = "sa11x0-pcmcia",
.id = -1,
@@ -356,7 +363,6 @@ static struct platform_device *sa11x0_devices[] __initdata = {
&sa11x0uart3_device,
&sa11x0ssp_device,
&sa11x0pcmcia_device,
- &sa11x0fb_device,
&sa11x0rtc_device,
};
diff --git a/arch/arm/mach-sa1100/generic.h b/arch/arm/mach-sa1100/generic.h
index 33268cf6be3..3b903f42464 100644
--- a/arch/arm/mach-sa1100/generic.h
+++ b/arch/arm/mach-sa1100/generic.h
@@ -40,3 +40,6 @@ void sa11x0_register_irda(struct irda_platform_data *irda);
struct mcp_plat_data;
void sa11x0_register_mcp(struct mcp_plat_data *data);
+
+struct sa1100fb_mach_info;
+void sa11x0_register_lcd(struct sa1100fb_mach_info *inf);
diff --git a/arch/arm/mach-sa1100/h3100.c b/arch/arm/mach-sa1100/h3100.c
index 1e6b3c105ba..1f8a271dc66 100644
--- a/arch/arm/mach-sa1100/h3100.c
+++ b/arch/arm/mach-sa1100/h3100.c
@@ -14,6 +14,8 @@
#include <linux/kernel.h>
#include <linux/gpio.h>
+#include <video/sa1100fb.h>
+
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/irda.h>
@@ -36,13 +38,26 @@ static void h3100_lcd_power(int enable)
}
}
+static struct sa1100fb_mach_info h3100_lcd_info = {
+ .pixclock = 406977, .bpp = 4,
+ .xres = 320, .yres = 240,
+
+ .hsync_len = 26, .vsync_len = 41,
+ .left_margin = 4, .upper_margin = 0,
+ .right_margin = 4, .lower_margin = 0,
+
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .cmap_greyscale = 1,
+ .cmap_inverse = 1,
+
+ .lccr0 = LCCR0_Mono | LCCR0_4PixMono | LCCR0_Sngl | LCCR0_Pas,
+ .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
+};
static void __init h3100_map_io(void)
{
h3xxx_map_io();
- sa1100fb_lcd_power = h3100_lcd_power;
-
/* Older bootldrs put GPIO2-9 in alternate mode on the
assumption that they are used for video */
GAFR &= ~0x000001fb;
@@ -80,6 +95,9 @@ static void __init h3100_mach_init(void)
{
h3xxx_init_gpio(h3100_default_gpio, ARRAY_SIZE(h3100_default_gpio));
h3xxx_mach_init();
+
+ sa1100fb_lcd_power = h3100_lcd_power;
+ sa11x0_register_lcd(&h3100_lcd_info);
sa11x0_register_irda(&h3100_irda_data);
}
diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c
index 6b58e7460ec..3dd39bfe348 100644
--- a/arch/arm/mach-sa1100/h3600.c
+++ b/arch/arm/mach-sa1100/h3600.c
@@ -14,6 +14,8 @@
#include <linux/kernel.h>
#include <linux/gpio.h>
+#include <video/sa1100fb.h>
+
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/irda.h>
@@ -56,11 +58,33 @@ err2: gpio_free(H3XXX_EGPIO_LCD_ON);
err1: return;
}
+static const struct sa1100fb_rgb h3600_rgb_16 = {
+ .red = { .offset = 12, .length = 4, },
+ .green = { .offset = 7, .length = 4, },
+ .blue = { .offset = 1, .length = 4, },
+ .transp = { .offset = 0, .length = 0, },
+};
+
+static struct sa1100fb_mach_info h3600_lcd_info = {
+ .pixclock = 174757, .bpp = 16,
+ .xres = 320, .yres = 240,
+
+ .hsync_len = 3, .vsync_len = 3,
+ .left_margin = 12, .upper_margin = 10,
+ .right_margin = 17, .lower_margin = 1,
+
+ .cmap_static = 1,
+
+ .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+ .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
+
+ .rgb[RGB_16] = &h3600_rgb_16,
+};
+
+
static void __init h3600_map_io(void)
{
h3xxx_map_io();
-
- sa1100fb_lcd_power = h3600_lcd_power;
}
/*
@@ -121,6 +145,9 @@ static void __init h3600_mach_init(void)
{
h3xxx_init_gpio(h3600_default_gpio, ARRAY_SIZE(h3600_default_gpio));
h3xxx_mach_init();
+
+ sa1100fb_lcd_power = h3600_lcd_power;
+ sa11x0_register_lcd(&h3600_lcd_info);
sa11x0_register_irda(&h3600_irda_data);
}
diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c
index af4e2761f3d..463a322a425 100644
--- a/arch/arm/mach-sa1100/lart.c
+++ b/arch/arm/mach-sa1100/lart.c
@@ -6,6 +6,8 @@
#include <linux/kernel.h>
#include <linux/tty.h>
+#include <video/sa1100fb.h>
+
#include <mach/hardware.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
@@ -26,8 +28,85 @@ static struct mcp_plat_data lart_mcp_data = {
.sclk_rate = 11981000,
};
+#ifdef LART_GREY_LCD
+static struct sa1100fb_mach_info lart_grey_info = {
+ .pixclock = 150000, .bpp = 4,
+ .xres = 320, .yres = 240,
+
+ .hsync_len = 1, .vsync_len = 1,
+ .left_margin = 4, .upper_margin = 0,
+ .right_margin = 2, .lower_margin = 0,
+
+ .cmap_greyscale = 1,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+
+ .lccr0 = LCCR0_Mono | LCCR0_Sngl | LCCR0_Pas | LCCR0_4PixMono,
+ .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(512),
+};
+#endif
+#ifdef LART_COLOR_LCD
+static struct sa1100fb_mach_info lart_color_info = {
+ .pixclock = 150000, .bpp = 16,
+ .xres = 320, .yres = 240,
+
+ .hsync_len = 2, .vsync_len = 3,
+ .left_margin = 69, .upper_margin = 14,
+ .right_margin = 8, .lower_margin = 4,
+
+ .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+ .lccr3 = LCCR3_OutEnH | LCCR3_PixFlEdg | LCCR3_ACBsDiv(512),
+};
+#endif
+#ifdef LART_VIDEO_OUT
+static struct sa1100fb_mach_info lart_video_info = {
+ .pixclock = 39721, .bpp = 16,
+ .xres = 640, .yres = 480,
+
+ .hsync_len = 95, .vsync_len = 2,
+ .left_margin = 40, .upper_margin = 32,
+ .right_margin = 24, .lower_margin = 11,
+
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+
+ .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+ .lccr3 = LCCR3_OutEnL | LCCR3_PixFlEdg | LCCR3_ACBsDiv(512),
+};
+#endif
+
+#ifdef LART_KIT01_LCD
+static struct sa1100fb_mach_info lart_kit01_info = {
+ .pixclock = 63291, .bpp = 16,
+ .xres = 640, .yres = 480,
+
+ .hsync_len = 64, .vsync_len = 3,
+ .left_margin = 122, .upper_margin = 45,
+ .right_margin = 10, .lower_margin = 10,
+
+ .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+ .lccr3 = LCCR3_OutEnH | LCCR3_PixFlEdg
+};
+#endif
+
static void __init lart_init(void)
{
+ struct sa1100fb_mach_info *inf = NULL;
+
+#ifdef LART_GREY_LCD
+ inf = &lart_grey_info;
+#endif
+#ifdef LART_COLOR_LCD
+ inf = &lart_color_info;
+#endif
+#ifdef LART_VIDEO_OUT
+ inf = &lart_video_info;
+#endif
+#ifdef LART_KIT01_LCD
+ inf = &lart_kit01_info;
+#endif
+
+ if (inf)
+ sa11x0_register_lcd(inf);
+
sa11x0_register_mcp(&lart_mcp_data);
}
diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c
index 318b2b766a0..c695b730bd6 100644
--- a/arch/arm/mach-sa1100/shannon.c
+++ b/arch/arm/mach-sa1100/shannon.c
@@ -9,6 +9,8 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
+#include <video/sa1100fb.h>
+
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/setup.h>
@@ -57,8 +59,23 @@ static struct mcp_plat_data shannon_mcp_data = {
.sclk_rate = 11981000,
};
+static struct sa1100fb_mach_info shannon_lcd_info = {
+ .pixclock = 152500, .bpp = 8,
+ .xres = 640, .yres = 480,
+
+ .hsync_len = 4, .vsync_len = 3,
+ .left_margin = 2, .upper_margin = 0,
+ .right_margin = 1, .lower_margin = 0,
+
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+
+ .lccr0 = LCCR0_Color | LCCR0_Dual | LCCR0_Pas,
+ .lccr3 = LCCR3_ACBsDiv(512),
+};
+
static void __init shannon_init(void)
{
+ sa11x0_register_lcd(&shannon_lcd_info);
sa11x0_register_mtd(&shannon_flash_data, &shannon_flash_resource, 1);
sa11x0_register_mcp(&shannon_mcp_data);
}
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-12 01:39:33 +0000