diff options
Diffstat (limited to 'arch')
329 files changed, 2634 insertions, 6770 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index a48aecc17ea..92c9c79c140 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -324,7 +324,7 @@ config ARCH_AT91 select CLKDEV_LOOKUP help This enables support for systems based on the Atmel AT91RM9200, - AT91SAM9 and AT91CAP9 processors. + AT91SAM9 processors. config ARCH_BCMRING bool "Broadcom BCMRING" diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index e0d236d7ff7..b895a2a92da 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -81,47 +81,14 @@ choice prompt "Kernel low-level debugging port" depends on DEBUG_LL - config DEBUG_LL_UART_NONE - bool "No low-level debugging UART" - help - Say Y here if your platform doesn't provide a UART option - below. This relies on your platform choosing the right UART - definition internally in order for low-level debugging to - work. - - config DEBUG_ICEDCC - bool "Kernel low-level debugging via EmbeddedICE DCC channel" - help - Say Y here if you want the debug print routines to direct - their output to the EmbeddedICE macrocell's DCC channel using - co-processor 14. This is known to work on the ARM9 style ICE - channel and on the XScale with the PEEDI. - - Note that the system will appear to hang during boot if there - is nothing connected to read from the DCC. - config AT91_DEBUG_LL_DBGU0 bool "Kernel low-level debugging on rm9200, 9260/9g20, 9261/9g10 and 9rl" depends on HAVE_AT91_DBGU0 config AT91_DEBUG_LL_DBGU1 - bool "Kernel low-level debugging on 9263, 9g45 and cap9" + bool "Kernel low-level debugging on 9263 and 9g45" depends on HAVE_AT91_DBGU1 - config DEBUG_FOOTBRIDGE_COM1 - bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1" - depends on FOOTBRIDGE - help - Say Y here if you want the debug print routines to direct - their output to the 8250 at PCI COM1. - - config DEBUG_DC21285_PORT - bool "Kernel low-level debugging messages via footbridge serial port" - depends on FOOTBRIDGE - help - Say Y here if you want the debug print routines to direct - their output to the serial port in the DC21285 (Footbridge). - config DEBUG_CLPS711X_UART1 bool "Kernel low-level debugging messages via UART1" depends on ARCH_CLPS711X @@ -136,6 +103,20 @@ choice Say Y here if you want the debug print routines to direct their output to the second serial port on these devices. + config DEBUG_DC21285_PORT + bool "Kernel low-level debugging messages via footbridge serial port" + depends on FOOTBRIDGE + help + Say Y here if you want the debug print routines to direct + their output to the serial port in the DC21285 (Footbridge). + + config DEBUG_FOOTBRIDGE_COM1 + bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1" + depends on FOOTBRIDGE + help + Say Y here if you want the debug print routines to direct + their output to the 8250 at PCI COM1. + config DEBUG_HIGHBANK_UART bool "Kernel low-level debugging messages via Highbank UART" depends on ARCH_HIGHBANK @@ -206,38 +187,42 @@ choice Say Y here if you want kernel low-level debugging support on i.MX6Q. - config DEBUG_S3C_UART0 - depends on PLAT_SAMSUNG - bool "Use S3C UART 0 for low-level debug" + config DEBUG_MSM_UART1 + bool "Kernel low-level debugging messages via MSM UART1" + depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50 help Say Y here if you want the debug print routines to direct - their output to UART 0. The port must have been initialised - by the boot-loader before use. - - The uncompressor code port configuration is now handled - by CONFIG_S3C_LOWLEVEL_UART_PORT. + their output to the first serial port on MSM devices. - config DEBUG_S3C_UART1 - depends on PLAT_SAMSUNG - bool "Use S3C UART 1 for low-level debug" + config DEBUG_MSM_UART2 + bool "Kernel low-level debugging messages via MSM UART2" + depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50 help Say Y here if you want the debug print routines to direct - their output to UART 1. The port must have been initialised - by the boot-loader before use. + their output to the second serial port on MSM devices. - The uncompressor code port configuration is now handled - by CONFIG_S3C_LOWLEVEL_UART_PORT. + config DEBUG_MSM_UART3 + bool "Kernel low-level debugging messages via MSM UART3" + depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50 + help + Say Y here if you want the debug print routines to direct + their output to the third serial port on MSM devices. - config DEBUG_S3C_UART2 - depends on PLAT_SAMSUNG - bool "Use S3C UART 2 for low-level debug" + config DEBUG_MSM8660_UART + bool "Kernel low-level debugging messages via MSM 8660 UART" + depends on ARCH_MSM8X60 + select MSM_HAS_DEBUG_UART_HS help Say Y here if you want the debug print routines to direct - their output to UART 2. The port must have been initialised - by the boot-loader before use. + their output to the serial port on MSM 8660 devices. - The uncompressor code port configuration is now handled - by CONFIG_S3C_LOWLEVEL_UART_PORT. + config DEBUG_MSM8960_UART + bool "Kernel low-level debugging messages via MSM 8960 UART" + depends on ARCH_MSM8960 + select MSM_HAS_DEBUG_UART_HS + help + Say Y here if you want the debug print routines to direct + their output to the serial port on MSM 8960 devices. config DEBUG_REALVIEW_STD_PORT bool "RealView Default UART" @@ -255,42 +240,57 @@ choice their output to the standard serial port on the RealView PB1176 platform. - config DEBUG_MSM_UART1 - bool "Kernel low-level debugging messages via MSM UART1" - depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50 + config DEBUG_S3C_UART0 + depends on PLAT_SAMSUNG + bool "Use S3C UART 0 for low-level debug" help Say Y here if you want the debug print routines to direct - their output to the first serial port on MSM devices. + their output to UART 0. The port must have been initialised + by the boot-loader before use. - config DEBUG_MSM_UART2 - bool "Kernel low-level debugging messages via MSM UART2" - depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50 + The uncompressor code port configuration is now handled + by CONFIG_S3C_LOWLEVEL_UART_PORT. + + config DEBUG_S3C_UART1 + depends on PLAT_SAMSUNG + bool "Use S3C UART 1 for low-level debug" help Say Y here if you want the debug print routines to direct - their output to the second serial port on MSM devices. + their output to UART 1. The port must have been initialised + by the boot-loader before use. - config DEBUG_MSM_UART3 - bool "Kernel low-level debugging messages via MSM UART3" - depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50 + The uncompressor code port configuration is now handled + by CONFIG_S3C_LOWLEVEL_UART_PORT. + + config DEBUG_S3C_UART2 + depends on PLAT_SAMSUNG + bool "Use S3C UART 2 for low-level debug" help Say Y here if you want the debug print routines to direct - their output to the third serial port on MSM devices. + their output to UART 2. The port must have been initialised + by the boot-loader before use. - config DEBUG_MSM8660_UART - bool "Kernel low-level debugging messages via MSM 8660 UART" - depends on ARCH_MSM8X60 - select MSM_HAS_DEBUG_UART_HS + The uncompressor code port configuration is now handled + by CONFIG_S3C_LOWLEVEL_UART_PORT. + + config DEBUG_LL_UART_NONE + bool "No low-level debugging UART" help - Say Y here if you want the debug print routines to direct - their output to the serial port on MSM 8660 devices. + Say Y here if your platform doesn't provide a UART option + below. This relies on your platform choosing the right UART + definition internally in order for low-level debugging to + work. - config DEBUG_MSM8960_UART - bool "Kernel low-level debugging messages via MSM 8960 UART" - depends on ARCH_MSM8960 - select MSM_HAS_DEBUG_UART_HS + config DEBUG_ICEDCC + bool "Kernel low-level debugging via EmbeddedICE DCC channel" help Say Y here if you want the debug print routines to direct - their output to the serial port on MSM 8960 devices. + their output to the EmbeddedICE macrocell's DCC channel using + co-processor 14. This is known to work on the ARM9 style ICE + channel and on the XScale with the PEEDI. + + Note that the system will appear to hang during boot if there + is nothing connected to read from the DCC. endchoice diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index 63d7578856c..a1dd2ee8375 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -29,6 +29,7 @@ compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; interrupt-controller; + cpu-offset = <0x8000>; reg = <0x10490000 0x1000>, <0x10480000 0x100>; }; diff --git a/arch/arm/boot/dts/tegra-paz00.dts b/arch/arm/boot/dts/tegra-paz00.dts index 1a1d7023b69..825d2957da0 100644 --- a/arch/arm/boot/dts/tegra-paz00.dts +++ b/arch/arm/boot/dts/tegra-paz00.dts @@ -46,11 +46,11 @@ }; serial@70006200 { - status = "disable"; + clock-frequency = <216000000>; }; serial@70006300 { - clock-frequency = <216000000>; + status = "disable"; }; serial@70006400 { @@ -60,7 +60,7 @@ sdhci@c8000000 { cd-gpios = <&gpio 173 0>; /* gpio PV5 */ wp-gpios = <&gpio 57 0>; /* gpio PH1 */ - power-gpios = <&gpio 155 0>; /* gpio PT3 */ + power-gpios = <&gpio 169 0>; /* gpio PV1 */ }; sdhci@c8000200 { diff --git a/arch/arm/configs/at91cap9_defconfig b/arch/arm/configs/at91cap9_defconfig deleted file mode 100644 index 8826eb218e7..00000000000 --- a/arch/arm/configs/at91cap9_defconfig +++ /dev/null @@ -1,108 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91CAP9=y -CONFIG_MACH_AT91CAP9ADK=y -CONFIG_MTD_AT91_DATAFLASH_CARD=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -# CONFIG_ARM_THUMB is not set -CONFIG_AEABI=y -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_DATAFLASH=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ATMEL=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y -CONFIG_NETDEVICES=y -CONFIG_MII=y -CONFIG_MACB=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_ADS7846=y -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_HW_RANDOM=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_SPI=y -CONFIG_SPI_ATMEL=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_FB=y -CONFIG_FB_ATMEL=y -CONFIG_LOGO=y -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_CLUT224 is not set -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_USB_ETH=m -CONFIG_USB_FILE_STORAGE=m -CONFIG_MMC=y -CONFIG_MMC_AT91=m -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_AT91SAM9=y -CONFIG_EXT2_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=y -CONFIG_ROOT_NFS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_850=y -CONFIG_NLS_ISO8859_1=y -CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_USER=y diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig index a22e9307906..d9eddfd7742 100644 --- a/arch/arm/configs/imx_v4_v5_defconfig +++ b/arch/arm/configs/imx_v4_v5_defconfig @@ -45,6 +45,7 @@ CONFIG_FPE_NWFPE=y CONFIG_FPE_NWFPE_XP=y CONFIG_PM_DEBUG=y CONFIG_NET=y +CONFIG_SMSC911X=y CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_INET=y @@ -78,6 +79,8 @@ CONFIG_MISC_DEVICES=y CONFIG_EEPROM_AT24=y CONFIG_EEPROM_AT25=y CONFIG_NETDEVICES=y +CONFIG_CS89x0=y +CONFIG_CS89x0_PLATFORM=y CONFIG_DM9000=y CONFIG_SMC91X=y CONFIG_SMC911X=y @@ -115,6 +118,21 @@ CONFIG_FB_IMX=y CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_LCD_L4F00242T03=y +CONFIG_MEDIA_SUPPORT=y +CONFIG_VIDEO_DEV=y +CONFIG_VIDEO_V4L2_COMMON=y +CONFIG_VIDEO_MEDIA=y +CONFIG_VIDEO_V4L2=y +CONFIG_VIDEOBUF_GEN=y +CONFIG_VIDEOBUF_DMA_CONTIG=y +CONFIG_VIDEOBUF2_CORE=y +CONFIG_VIDEO_CAPTURE_DRIVERS=y +CONFIG_V4L_PLATFORM_DRIVERS=y +CONFIG_SOC_CAMERA=y +CONFIG_SOC_CAMERA_OV2640=y +CONFIG_VIDEO_MX2_HOSTSUPPORT=y +CONFIG_VIDEO_MX2=y CONFIG_BACKLIGHT_PWM=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FONTS=y diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 3a4fb2e5fc6..6ae457aeea4 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -26,7 +26,6 @@ CONFIG_MACH_ARMADILLO5X0=y CONFIG_MACH_KZM_ARM11_01=y CONFIG_MACH_PCM043=y CONFIG_MACH_MX35_3DS=y -CONFIG_MACH_EUKREA_CPUIMX35=y CONFIG_MACH_VPR200=y CONFIG_MACH_IMX51_DT=y CONFIG_MACH_MX51_3DS=y @@ -82,8 +81,9 @@ CONFIG_PATA_IMX=y CONFIG_NETDEVICES=y # CONFIG_NET_VENDOR_BROADCOM is not set # CONFIG_NET_VENDOR_CHELSIO is not set +CONFIG_CS89x0=y +CONFIG_CS89x0_PLATFORM=y # CONFIG_NET_VENDOR_FARADAY is not set -CONFIG_FEC=y # CONFIG_NET_VENDOR_INTEL is not set # CONFIG_NET_VENDOR_MARVELL is not set # CONFIG_NET_VENDOR_MICREL is not set @@ -126,7 +126,39 @@ CONFIG_WATCHDOG=y CONFIG_IMX2_WDT=y CONFIG_MFD_MC13XXX=y CONFIG_REGULATOR=y +CONFIG_REGULATOR_MC13783=y CONFIG_REGULATOR_MC13892=y +CONFIG_MEDIA_SUPPORT=y +CONFIG_VIDEO_V4L2=y +CONFIG_VIDEO_DEV=y +CONFIG_VIDEO_V4L2_COMMON=y +CONFIG_VIDEOBUF_GEN=y +CONFIG_VIDEOBUF2_CORE=y +CONFIG_VIDEOBUF2_MEMOPS=y +CONFIG_VIDEOBUF2_DMA_CONTIG=y +CONFIG_VIDEO_CAPTURE_DRIVERS=y +CONFIG_V4L_PLATFORM_DRIVERS=y +CONFIG_SOC_CAMERA=y +CONFIG_SOC_CAMERA_OV2640=y +CONFIG_MX3_VIDEO=y +CONFIG_VIDEO_MX3=y +CONFIG_FB=y +CONFIG_FB_MX3=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +CONFIG_LCD_L4F00242T03=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_GENERIC=y +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_MXC=y diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h index e4c96cc6ec0..424aa458c48 100644 --- a/arch/arm/include/asm/system.h +++ b/arch/arm/include/asm/system.h @@ -110,6 +110,7 @@ extern void cpu_init(void); void soft_restart(unsigned long); extern void (*arm_pm_restart)(char str, const char *cmd); +extern void (*arm_pm_idle)(void); #define UDBG_UNDEFINED (1 << 0) #define UDBG_SYSCALL (1 << 1) diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h index 5d3ed7e3856..314d4664eae 100644 --- a/arch/arm/include/asm/tlb.h +++ b/arch/arm/include/asm/tlb.h @@ -198,7 +198,15 @@ static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte, unsigned long addr) { pgtable_page_dtor(pte); - tlb_add_flush(tlb, addr); + + /* + * With the classic ARM MMU, a pte page has two corresponding pmd + * entries, each covering 1MB. + */ + addr &= PMD_MASK; + tlb_add_flush(tlb, addr + SZ_1M - PAGE_SIZE); + tlb_add_flush(tlb, addr + SZ_1M); + tlb_remove_page(tlb, pte); } diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 3a456c6c700..be16a48007b 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -790,7 +790,7 @@ __kuser_cmpxchg64: @ 0xffff0f60 smp_dmb arm rsbs r0, r3, #0 @ set returned val and C flag ldmfd sp!, {r4, r5, r6, r7} - bx lr + usr_ret lr #elif !defined(CONFIG_SMP) diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c index 460bbbb6b88..6933244c68f 100644 --- a/arch/arm/kernel/perf_event_v7.c +++ b/arch/arm/kernel/perf_event_v7.c @@ -469,6 +469,20 @@ static const unsigned armv7_a5_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, }, }, + [C(NODE)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, }; /* @@ -579,6 +593,20 @@ static const unsigned armv7_a15_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, }, }, + [C(NODE)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, }; /* diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 971d65c253a..008e7ce766a 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -61,8 +61,6 @@ extern void setup_mm_for_reboot(void); static volatile int hlt_counter; -#include <mach/system.h> - void disable_hlt(void) { hlt_counter++; @@ -181,13 +179,17 @@ void cpu_idle_wait(void) EXPORT_SYMBOL_GPL(cpu_idle_wait); /* - * This is our default idle handler. We need to disable - * interrupts here to ensure we don't miss a wakeup call. + * This is our default idle handler. */ + +void (*arm_pm_idle)(void); + static void default_idle(void) { - if (!need_resched()) - arch_idle(); + if (arm_pm_idle) + arm_pm_idle(); + else + cpu_do_idle(); local_irq_enable(); } @@ -215,6 +217,10 @@ void cpu_idle(void) cpu_die(); #endif + /* + * We need to disable interrupts here + * to ensure we don't miss a wakeup call. + */ local_irq_disable(); #ifdef CONFIG_PL310_ERRATA_769419 wmb(); @@ -222,19 +228,18 @@ void cpu_idle(void) if (hlt_counter) { local_irq_enable(); cpu_relax(); - } else { + } else if (!need_resched()) { stop_critical_timings(); if (cpuidle_idle_call()) pm_idle(); start_critical_timings(); /* - * This will eventually be removed - pm_idle - * functions should always return with IRQs - * enabled. + * pm_idle functions must always + * return with IRQs enabled. */ WARN_ON(irqs_disabled()); + } else local_irq_enable(); - } } leds_event(led_idle_end); rcu_idle_exit(); diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index e1d5e1929fb..e33870ff0ac 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -699,10 +699,13 @@ static int vfp_set(struct task_struct *target, { int ret; struct thread_info *thread = task_thread_info(target); - struct vfp_hard_struct new_vfp = thread->vfpstate.hard; + struct vfp_hard_struct new_vfp; const size_t user_fpregs_offset = offsetof(struct user_vfp, fpregs); const size_t user_fpscr_offset = offsetof(struct user_vfp, fpscr); + vfp_sync_hwstate(thread); + new_vfp = thread->vfpstate.hard; + ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &new_vfp.fpregs, user_fpregs_offset, @@ -723,9 +726,8 @@ static int vfp_set(struct task_struct *target, if (ret) return ret; - vfp_sync_hwstate(thread); - thread->vfpstate.hard = new_vfp; vfp_flush_hwstate(thread); + thread->vfpstate.hard = new_vfp; return 0; } diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index 0340224cf73..9e617bd4a14 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -227,6 +227,8 @@ static int restore_vfp_context(struct vfp_sigframe __user *frame) if (magic != VFP_MAGIC || size != VFP_STORAGE_SIZE) return -EINVAL; + vfp_flush_hwstate(thread); + /* * Copy the floating point registers. There can be unused * registers see asm/hwcap.h for details. @@ -251,9 +253,6 @@ static int restore_vfp_context(struct vfp_sigframe __user *frame) __get_user_error(h->fpinst, &frame->ufp_exc.fpinst, err); __get_user_error(h->fpinst2, &frame->ufp_exc.fpinst2, err); - if (!err) - vfp_flush_hwstate(thread); - return err ? -EFAULT : 0; } diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 99a57270250..f84dfe67724 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -266,6 +266,7 @@ void die(const char *str, struct pt_regs *regs, int err) { struct thread_info *thread = current_thread_info(); int ret; + enum bug_trap_type bug_type = BUG_TRAP_TYPE_NONE; oops_enter(); @@ -273,7 +274,9 @@ void die(const char *str, struct pt_regs *regs, int err) console_verbose(); bust_spinlocks(1); if (!user_mode(regs)) - report_bug(regs->ARM_pc, regs); + bug_type = report_bug(regs->ARM_pc, regs); + if (bug_type != BUG_TRAP_TYPE_NONE) + str = "Oops - BUG"; ret = __die(str, err, thread, regs); if (regs && kexec_should_crash(thread->task)) diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index 1e19691e040..43a31fb0631 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -10,6 +10,7 @@ #include <asm/page.h> #define PROC_INFO \ + . = ALIGN(4); \ VMLINUX_SYMBOL(__proc_info_begin) = .; \ *(.proc.info.init) \ VMLINUX_SYMBOL(__proc_info_end) = .; diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 71feb00a1e9..0284e66c47f 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -102,15 +102,6 @@ config ARCH_AT91SAM9G45 select HAVE_AT91_DBGU1 select AT91_SAM9G45_RESET -config ARCH_AT91CAP9 - bool "AT91CAP9" - select CPU_ARM926T - select GENERIC_CLOCKEVENTS - select HAVE_FB_ATMEL - select HAVE_NET_MACB - select HAVE_AT91_DBGU1 - select AT91_SAM9G45_RESET - config ARCH_AT91X40 bool "AT91x40" select ARCH_USES_GETTIMEOFFSET @@ -447,21 +438,6 @@ endif # ---------------------------------------------------------- -if ARCH_AT91CAP9 - -comment "AT91CAP9 Board Type" - -config MACH_AT91CAP9ADK - bool "Atmel AT91CAP9A-DK Evaluation Kit" - select HAVE_AT91_DATAFLASH_CARD - help - Select this if you are using Atmel's AT91CAP9A-DK Evaluation Kit. - <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4138> - -endif - -# ---------------------------------------------------------- - if ARCH_AT91X40 comment "AT91X40 Board Type" @@ -544,7 +520,7 @@ config AT91_EARLY_DBGU0 depends on HAVE_AT91_DBGU0 config AT91_EARLY_DBGU1 - bool "DBGU on 9263, 9g45 and cap9" + bool "DBGU on 9263 and 9g45" depends on HAVE_AT91_DBGU1 config AT91_EARLY_USART0 diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index 705e1fbded3..aeb76f1690d 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -20,7 +20,6 @@ obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263.o at91sam926x_time.o at91sam9263_d obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o sam9_smc.o obj-$(CONFIG_ARCH_AT91SAM9G20) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o obj-$(CONFIG_ARCH_AT91SAM9G45) += at91sam9g45.o at91sam926x_time.o at91sam9g45_devices.o sam9_smc.o -obj-$(CONFIG_ARCH_AT91CAP9) += at91cap9.o at91sam926x_time.o at91cap9_devices.o sam9_smc.o obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o # AT91RM9200 board-specific support @@ -81,9 +80,6 @@ obj-$(CONFIG_MACH_AT91SAM9M10G45EK) += board-sam9m10g45ek.o # AT91SAM board with device-tree obj-$(CONFIG_MACH_AT91SAM_DT) += board-dt.o -# AT91CAP9 board-specific support -obj-$(CONFIG_MACH_AT91CAP9ADK) += board-cap9adk.o - # AT91X40 board-specific support obj-$(CONFIG_MACH_AT91EB01) += board-eb01.o diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot index 8ddafadfdc7..2fd051eb244 100644 --- a/arch/arm/mach-at91/Makefile.boot +++ b/arch/arm/mach-at91/Makefile.boot @@ -3,11 +3,7 @@ # PARAMS_PHYS must be within 4MB of ZRELADDR # INITRD_PHYS must be in RAM -ifeq ($(CONFIG_ARCH_AT91CAP9),y) - zreladdr-y += 0x70008000 -params_phys-y := 0x70000100 -initrd_phys-y := 0x70410000 -else ifeq ($(CONFIG_ARCH_AT91SAM9G45),y) +ifeq ($(CONFIG_ARCH_AT91SAM9G45),y) zreladdr-y += 0x70008000 params_phys-y := 0x70000100 initrd_phys-y := 0x70410000 diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c deleted file mode 100644 index a42edc25a87..00000000000 --- a/arch/arm/mach-at91/at91cap9.c +++ /dev/null @@ -1,396 +0,0 @@ -/* - * arch/arm/mach-at91/at91cap9.c - * - * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com> - * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com> - * Copyright (C) 2007 Atmel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ - -#include <linux/module.h> - -#include <asm/irq.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include <mach/cpu.h> -#include <mach/at91cap9.h> -#include <mach/at91_pmc.h> - -#include "soc.h" -#include "generic.h" -#include "clock.h" -#include "sam9_smc.h" - -/* -------------------------------------------------------------------- - * Clocks - * -------------------------------------------------------------------- */ - -/* - * The peripheral clocks. - */ -static struct clk pioABCD_clk = { - .name = "pioABCD_clk", - .pmc_mask = 1 << AT91CAP9_ID_PIOABCD, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk mpb0_clk = { - .name = "mpb0_clk", - .pmc_mask = 1 << AT91CAP9_ID_MPB0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk mpb1_clk = { - .name = "mpb1_clk", - .pmc_mask = 1 << AT91CAP9_ID_MPB1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk mpb2_clk = { - .name = "mpb2_clk", - .pmc_mask = 1 << AT91CAP9_ID_MPB2, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk mpb3_clk = { - .name = "mpb3_clk", - .pmc_mask = 1 << AT91CAP9_ID_MPB3, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk mpb4_clk = { - .name = "mpb4_clk", - .pmc_mask = 1 << AT91CAP9_ID_MPB4, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart0_clk = { - .name = "usart0_clk", - .pmc_mask = 1 << AT91CAP9_ID_US0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart1_clk = { - .name = "usart1_clk", - .pmc_mask = 1 << AT91CAP9_ID_US1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart2_clk = { - .name = "usart2_clk", - .pmc_mask = 1 << AT91CAP9_ID_US2, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk mmc0_clk = { - .name = "mci0_clk", - .pmc_mask = 1 << AT91CAP9_ID_MCI0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk mmc1_clk = { - .name = "mci1_clk", - .pmc_mask = 1 << AT91CAP9_ID_MCI1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk can_clk = { - .name = "can_clk", - .pmc_mask = 1 << AT91CAP9_ID_CAN, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk twi_clk = { - .name = "twi_clk", - .pmc_mask = 1 << AT91CAP9_ID_TWI, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk spi0_clk = { - .name = "spi0_clk", - .pmc_mask = 1 << AT91CAP9_ID_SPI0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk spi1_clk = { - .name = "spi1_clk", - .pmc_mask = 1 << AT91CAP9_ID_SPI1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ssc0_clk = { - .name = "ssc0_clk", - .pmc_mask = 1 << AT91CAP9_ID_SSC0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ssc1_clk = { - .name = "ssc1_clk", - .pmc_mask = 1 << AT91CAP9_ID_SSC1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ac97_clk = { - .name = "ac97_clk", - .pmc_mask = 1 << AT91CAP9_ID_AC97C, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk tcb_clk = { - .name = "tcb_clk", - .pmc_mask = 1 << AT91CAP9_ID_TCB, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk pwm_clk = { - .name = "pwm_clk", - .pmc_mask = 1 << AT91CAP9_ID_PWMC, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk macb_clk = { - .name = "pclk", - .pmc_mask = 1 << AT91CAP9_ID_EMAC, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk aestdes_clk = { - .name = "aestdes_clk", - .pmc_mask = 1 << AT91CAP9_ID_AESTDES, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk adc_clk = { - .name = "adc_clk", - .pmc_mask = 1 << AT91CAP9_ID_ADC, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk isi_clk = { - .name = "isi_clk", - .pmc_mask = 1 << AT91CAP9_ID_ISI, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk lcdc_clk = { - .name = "lcdc_clk", - .pmc_mask = 1 << AT91CAP9_ID_LCDC, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk dma_clk = { - .name = "dma_clk", - .pmc_mask = 1 << AT91CAP9_ID_DMA, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk udphs_clk = { - .name = "udphs_clk", - .pmc_mask = 1 << AT91CAP9_ID_UDPHS, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ohci_clk = { - .name = "ohci_clk", - .pmc_mask = 1 << AT91CAP9_ID_UHP, - .type = CLK_TYPE_PERIPHERAL, -}; - -static struct clk *periph_clocks[] __initdata = { - &pioABCD_clk, - &mpb0_clk, - &mpb1_clk, - &mpb2_clk, - &mpb3_clk, - &mpb4_clk, - &usart0_clk, - &usart1_clk, - &usart2_clk, - &mmc0_clk, - &mmc1_clk, - &can_clk, - &twi_clk, - &spi0_clk, - &spi1_clk, - &ssc0_clk, - &ssc1_clk, - &ac97_clk, - &tcb_clk, - &pwm_clk, - &macb_clk, - &aestdes_clk, - &adc_clk, - &isi_clk, - &lcdc_clk, - &dma_clk, - &udphs_clk, - &ohci_clk, - // irq0 .. irq1 -}; - -static struct clk_lookup periph_clocks_lookups[] = { - /* One additional fake clock for macb_hclk */ - CLKDEV_CON_ID("hclk", &macb_clk), - CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk), - CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk), - CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk), - CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk), - CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), - CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), - CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk), - CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), - CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), - /* fake hclk clock */ - CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk), - CLKDEV_CON_ID("pioA", &pioABCD_clk), - CLKDEV_CON_ID("pioB", &pioABCD_clk), - CLKDEV_CON_ID("pioC", &pioABCD_clk), - CLKDEV_CON_ID("pioD", &pioABCD_clk), -}; - -static struct clk_lookup usart_clocks_lookups[] = { - CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck), - CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk), - CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk), - CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk), -}; - -/* - * The four programmable clocks. - * You must configure pin multiplexing to bring these signals out. - */ -static struct clk pck0 = { - .name = "pck0", - .pmc_mask = AT91_PMC_PCK0, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 0, -}; -static struct clk pck1 = { - .name = "pck1", - .pmc_mask = AT91_PMC_PCK1, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 1, -}; -static struct clk pck2 = { - .name = "pck2", - .pmc_mask = AT91_PMC_PCK2, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 2, -}; -static struct clk pck3 = { - .name = "pck3", - .pmc_mask = AT91_PMC_PCK3, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 3, -}; - -static void __init at91cap9_register_clocks(void) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) - clk_register(periph_clocks[i]); - - clkdev_add_table(periph_clocks_lookups, - ARRAY_SIZE(periph_clocks_lookups)); - clkdev_add_table(usart_clocks_lookups, - ARRAY_SIZE(usart_clocks_lookups)); - - clk_register(&pck0); - clk_register(&pck1); - clk_register(&pck2); - clk_register(&pck3); -} - -static struct clk_lookup console_clock_lookup; - -void __init at91cap9_set_console_clock(int id) -{ - if (id >= ARRAY_SIZE(usart_clocks_lookups)) - return; - - console_clock_lookup.con_id = "usart"; - console_clock_lookup.clk = usart_clocks_lookups[id].clk; - clkdev_add(&console_clock_lookup); -} - -/* -------------------------------------------------------------------- - * GPIO - * -------------------------------------------------------------------- */ - -static struct at91_gpio_bank at91cap9_gpio[] __initdata = { - { - .id = AT91CAP9_ID_PIOABCD, - .regbase = AT91CAP9_BASE_PIOA, - }, { - .id = AT91CAP9_ID_PIOABCD, - .regbase = AT91CAP9_BASE_PIOB, - }, { - .id = AT91CAP9_ID_PIOABCD, - .regbase = AT91CAP9_BASE_PIOC, - }, { - .id = AT91CAP9_ID_PIOABCD, - .regbase = AT91CAP9_BASE_PIOD, - } -}; - -/* -------------------------------------------------------------------- - * AT91CAP9 processor initialization - * -------------------------------------------------------------------- */ - -static void __init at91cap9_map_io(void) -{ - at91_init_sram(0, AT91CAP9_SRAM_BASE, AT91CAP9_SRAM_SIZE); -} - -static void __init at91cap9_ioremap_registers(void) -{ - at91_ioremap_shdwc(AT91CAP9_BASE_SHDWC); - at91_ioremap_rstc(AT91CAP9_BASE_RSTC); - at91sam926x_ioremap_pit(AT91CAP9_BASE_PIT); - at91sam9_ioremap_smc(0, AT91CAP9_BASE_SMC); -} - -static void __init at91cap9_initialize(void) -{ - arm_pm_restart = at91sam9g45_restart; - at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1); - - /* Register GPIO subsystem */ - at91_gpio_init(at91cap9_gpio, 4); - - /* Remember the silicon revision */ - if (cpu_is_at91cap9_revB()) - system_rev = 0xB; - else if (cpu_is_at91cap9_revC()) - system_rev = 0xC; -} - -/* -------------------------------------------------------------------- - * Interrupt initialization - * -------------------------------------------------------------------- */ - -/* - * The default interrupt priority levels (0 = lowest, 7 = highest). - */ -static unsigned int at91cap9_default_irq_priority[NR_AIC_IRQS] __initdata = { - 7, /* Advanced Interrupt Controller (FIQ) */ - 7, /* System Peripherals */ - 1, /* Parallel IO Controller A, B, C and D */ - 0, /* MP Block Peripheral 0 */ - 0, /* MP Block Peripheral 1 */ - 0, /* MP Block Peripheral 2 */ - 0, /* MP Block Peripheral 3 */ - 0, /* MP Block Peripheral 4 */ - 5, /* USART 0 */ - 5, /* USART 1 */ - 5, /* USART 2 */ - 0, /* Multimedia Card Interface 0 */ - 0, /* Multimedia Card Interface 1 */ - 3, /* CAN */ - 6, /* Two-Wire Interface */ - 5, /* Serial Peripheral Interface 0 */ - 5, /* Serial Peripheral Interface 1 */ - 4, /* Serial Synchronous Controller 0 */ - 4, /* Serial Synchronous Controller 1 */ - 5, /* AC97 Controller */ - 0, /* Timer Counter 0, 1 and 2 */ - 0, /* Pulse Width Modulation Controller */ - 3, /* Ethernet */ - 0, /* Advanced Encryption Standard, Triple DES*/ - 0, /* Analog-to-Digital Converter */ - 0, /* Image Sensor Interface */ - 3, /* LCD Controller */ - 0, /* DMA Controller */ - 2, /* USB Device Port */ - 2, /* USB Host port */ - 0, /* Advanced Interrupt Controller (IRQ0) */ - 0, /* Advanced Interrupt Controller (IRQ1) */ -}; - -struct at91_init_soc __initdata at91cap9_soc = { - .map_io = at91cap9_map_io, - .default_irq_priority = at91cap9_default_irq_priority, - .ioremap_registers = at91cap9_ioremap_registers, - .register_clocks = at91cap9_register_clocks, - .init = at91cap9_initialize, -}; diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c deleted file mode 100644 index d298fb7cb21..00000000000 --- a/arch/arm/mach-at91/at91cap9_devices.c +++ /dev/null @@ -1,1273 +0,0 @@ -/* - * arch/arm/mach-at91/at91cap9_devices.c - * - * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com> - * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com> - * Copyright (C) 2007 Atmel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <linux/dma-mapping.h> -#include <linux/gpio.h> -#include <linux/platform_device.h> -#include <linux/i2c-gpio.h> - -#include <video/atmel_lcdc.h> - -#include <mach/board.h> -#include <mach/cpu.h> -#include <mach/at91cap9.h> -#include <mach/at91cap9_matrix.h> -#include <mach/at91sam9_smc.h> - -#include "generic.h" - - -/* -------------------------------------------------------------------- - * USB Host - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) -static u64 ohci_dmamask = DMA_BIT_MASK(32); -static struct at91_usbh_data usbh_data; - -static struct resource usbh_resources[] = { - [0] = { - .start = AT91CAP9_UHP_BASE, - .end = AT91CAP9_UHP_BASE + SZ_1M - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_ID_UHP, - .end = AT91CAP9_ID_UHP, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91_usbh_device = { - .name = "at91_ohci", - .id = -1, - .dev = { - .dma_mask = &ohci_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &usbh_data, - }, - .resource = usbh_resources, - .num_resources = ARRAY_SIZE(usbh_resources), -}; - -void __init at91_add_device_usbh(struct at91_usbh_data *data) -{ - int i; - - if (!data) - return; - - if (cpu_is_at91cap9_revB()) - irq_set_irq_type(AT91CAP9_ID_UHP, IRQ_TYPE_LEVEL_HIGH); - - /* Enable VBus control for UHP ports */ - for (i = 0; i < data->ports; i++) { - if (gpio_is_valid(data->vbus_pin[i])) - at91_set_gpio_output(data->vbus_pin[i], 0); - } - - /* Enable overcurrent notification */ - for (i = 0; i < data->ports; i++) { - if (data->overcurrent_pin[i]) - at91_set_gpio_input(data->overcurrent_pin[i], 1); - } - - usbh_data = *data; - platform_device_register(&at91_usbh_device); -} -#else -void __init at91_add_device_usbh(struct at91_usbh_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * USB HS Device (Gadget) - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_USB_ATMEL_USBA) || defined(CONFIG_USB_ATMEL_USBA_MODULE) - -static struct resource usba_udc_resources[] = { - [0] = { - .start = AT91CAP9_UDPHS_FIFO, - .end = AT91CAP9_UDPHS_FIFO + SZ_512K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_BASE_UDPHS, - .end = AT91CAP9_BASE_UDPHS + SZ_1K - 1, - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = AT91CAP9_ID_UDPHS, - .end = AT91CAP9_ID_UDPHS, - .flags = IORESOURCE_IRQ, - }, -}; - -#define EP(nam, idx, maxpkt, maxbk, dma, isoc) \ - [idx] = { \ - .name = nam, \ - .index = idx, \ - .fifo_size = maxpkt, \ - .nr_banks = maxbk, \ - .can_dma = dma, \ - .can_isoc = isoc, \ - } - -static struct usba_ep_data usba_udc_ep[] = { - EP("ep0", 0, 64, 1, 0, 0), - EP("ep1", 1, 1024, 3, 1, 1), - EP("ep2", 2, 1024, 3, 1, 1), - EP("ep3", 3, 1024, 2, 1, 1), - EP("ep4", 4, 1024, 2, 1, 1), - EP("ep5", 5, 1024, 2, 1, 0), - EP("ep6", 6, 1024, 2, 1, 0), - EP("ep7", 7, 1024, 2, 0, 0), -}; - -#undef EP - -/* - * pdata doesn't have room for any endpoints, so we need to - * append room for the ones we need right after it. - */ -static struct { - struct usba_platform_data pdata; - struct usba_ep_data ep[8]; -} usba_udc_data; - -static struct platform_device at91_usba_udc_device = { - .name = "atmel_usba_udc", - .id = -1, - .dev = { - .platform_data = &usba_udc_data.pdata, - }, - .resource = usba_udc_resources, - .num_resources = ARRAY_SIZE(usba_udc_resources), -}; - -void __init at91_add_device_usba(struct usba_platform_data *data) -{ - if (cpu_is_at91cap9_revB()) { - irq_set_irq_type(AT91CAP9_ID_UDPHS, IRQ_TYPE_LEVEL_HIGH); - at91_sys_write(AT91_MATRIX_UDPHS, AT91_MATRIX_SELECT_UDPHS | - AT91_MATRIX_UDPHS_BYPASS_LOCK); - } - else - at91_sys_write(AT91_MATRIX_UDPHS, AT91_MATRIX_SELECT_UDPHS); - - /* - * Invalid pins are 0 on AT91, but the usba driver is shared - * with AVR32, which use negative values instead. Once/if - * gpio_is_valid() is ported to AT91, revisit this code. - */ - usba_udc_data.pdata.vbus_pin = -EINVAL; - usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep); - memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep)); - - if (data && gpio_is_valid(data->vbus_pin)) { - at91_set_gpio_input(data->vbus_pin, 0); - at91_set_deglitch(data->vbus_pin, 1); - usba_udc_data.pdata.vbus_pin = data->vbus_pin; - } - - /* Pullup pin is handled internally by USB device peripheral */ - - platform_device_register(&at91_usba_udc_device); -} -#else -void __init at91_add_device_usba(struct usba_platform_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * Ethernet - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE) -static u64 eth_dmamask = DMA_BIT_MASK(32); -static struct macb_platform_data eth_data; - -static struct resource eth_resources[] = { - [0] = { - .start = AT91CAP9_BASE_EMAC, - .end = AT91CAP9_BASE_EMAC + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_ID_EMAC, - .end = AT91CAP9_ID_EMAC, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91cap9_eth_device = { - .name = "macb", - .id = -1, - .dev = { - .dma_mask = ð_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = ð_data, - }, - .resource = eth_resources, - .num_resources = ARRAY_SIZE(eth_resources), -}; - -void __init at91_add_device_eth(struct macb_platform_data *data) -{ - if (!data) - return; - - if (gpio_is_valid(data->phy_irq_pin)) { - at91_set_gpio_input(data->phy_irq_pin, 0); - at91_set_deglitch(data->phy_irq_pin, 1); - } - - /* Pins used for MII and RMII */ - at91_set_A_periph(AT91_PIN_PB21, 0); /* ETXCK_EREFCK */ - at91_set_A_periph(AT91_PIN_PB22, 0); /* ERXDV */ - at91_set_A_periph(AT91_PIN_PB25, 0); /* ERX0 */ - at91_set_A_periph(AT91_PIN_PB26, 0); /* ERX1 */ - at91_set_A_periph(AT91_PIN_PB27, 0); /* ERXER */ - at91_set_A_periph(AT91_PIN_PB28, 0); /* ETXEN */ - at91_set_A_periph(AT91_PIN_PB23, 0); /* ETX0 */ - at91_set_A_periph(AT91_PIN_PB24, 0); /* ETX1 */ - at91_set_A_periph(AT91_PIN_PB30, 0); /* EMDIO */ - at91_set_A_periph(AT91_PIN_PB29, 0); /* EMDC */ - - if (!data->is_rmii) { - at91_set_B_periph(AT91_PIN_PC25, 0); /* ECRS */ - at91_set_B_periph(AT91_PIN_PC26, 0); /* ECOL */ - at91_set_B_periph(AT91_PIN_PC22, 0); /* ERX2 */ - at91_set_B_periph(AT91_PIN_PC23, 0); /* ERX3 */ - at91_set_B_periph(AT91_PIN_PC27, 0); /* ERXCK */ - at91_set_B_periph(AT91_PIN_PC20, 0); /* ETX2 */ - at91_set_B_periph(AT91_PIN_PC21, 0); /* ETX3 */ - at91_set_B_periph(AT91_PIN_PC24, 0); /* ETXER */ - } - - eth_data = *data; - platform_device_register(&at91cap9_eth_device); -} -#else -void __init at91_add_device_eth(struct macb_platform_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * MMC / SD - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE) -static u64 mmc_dmamask = DMA_BIT_MASK(32); -static struct at91_mmc_data mmc0_data, mmc1_data; - -static struct resource mmc0_resources[] = { - [0] = { - .start = AT91CAP9_BASE_MCI0, - .end = AT91CAP9_BASE_MCI0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_ID_MCI0, - .end = AT91CAP9_ID_MCI0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91cap9_mmc0_device = { - .name = "at91_mci", - .id = 0, - .dev = { - .dma_mask = &mmc_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &mmc0_data, - }, - .resource = mmc0_resources, - .num_resources = ARRAY_SIZE(mmc0_resources), -}; - -static struct resource mmc1_resources[] = { - [0] = { - .start = AT91CAP9_BASE_MCI1, - .end = AT91CAP9_BASE_MCI1 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_ID_MCI1, - .end = AT91CAP9_ID_MCI1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91cap9_mmc1_device = { - .name = "at91_mci", - .id = 1, - .dev = { - .dma_mask = &mmc_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &mmc1_data, - }, - .resource = mmc1_resources, - .num_resources = ARRAY_SIZE(mmc1_resources), -}; - -void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) -{ - if (!data) - return; - - /* input/irq */ - if (gpio_is_valid(data->det_pin)) { - at91_set_gpio_input(data->det_pin, 1); - at91_set_deglitch(data->det_pin, 1); - } - if (gpio_is_valid(data->wp_pin)) - at91_set_gpio_input(data->wp_pin, 1); - if (gpio_is_valid(data->vcc_pin)) - at91_set_gpio_output(data->vcc_pin, 0); - - if (mmc_id == 0) { /* MCI0 */ - /* CLK */ - at91_set_A_periph(AT91_PIN_PA2, 0); - - /* CMD */ - at91_set_A_periph(AT91_PIN_PA1, 1); - - /* DAT0, maybe DAT1..DAT3 */ - at91_set_A_periph(AT91_PIN_PA0, 1); - if (data->wire4) { - at91_set_A_periph(AT91_PIN_PA3, 1); - at91_set_A_periph(AT91_PIN_PA4, 1); - at91_set_A_periph(AT91_PIN_PA5, 1); - } - - mmc0_data = *data; - platform_device_register(&at91cap9_mmc0_device); - } else { /* MCI1 */ - /* CLK */ - at91_set_A_periph(AT91_PIN_PA16, 0); - - /* CMD */ - at91_set_A_periph(AT91_PIN_PA17, 1); - - /* DAT0, maybe DAT1..DAT3 */ - at91_set_A_periph(AT91_PIN_PA18, 1); - if (data->wire4) { - at91_set_A_periph(AT91_PIN_PA19, 1); - at91_set_A_periph(AT91_PIN_PA20, 1); - at91_set_A_periph(AT91_PIN_PA21, 1); - } - - mmc1_data = *data; - platform_device_register(&at91cap9_mmc1_device); - } -} -#else -void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * NAND / SmartMedia - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE) -static struct atmel_nand_data nand_data; - -#define NAND_BASE AT91_CHIPSELECT_3 - -static struct resource nand_resources[] = { - [0] = { - .start = NAND_BASE, - .end = NAND_BASE + SZ_256M - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_BASE_ECC, - .end = AT91CAP9_BASE_ECC + SZ_512 - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device at91cap9_nand_device = { - .name = "atmel_nand", - .id = -1, - .dev = { - .platform_data = &nand_data, - }, - .resource = nand_resources, - .num_resources = ARRAY_SIZE(nand_resources), -}; - -void __init at91_add_device_nand(struct atmel_nand_data *data) -{ - unsigned long csa; - - if (!data) - return; - - csa = at91_sys_read(AT91_MATRIX_EBICSA); - at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA); - - /* enable pin */ - if (gpio_is_valid(data->enable_pin)) - at91_set_gpio_output(data->enable_pin, 1); - - /* ready/busy pin */ - if (gpio_is_valid(data->rdy_pin)) - at91_set_gpio_input(data->rdy_pin, 1); - - /* card detect pin */ - if (gpio_is_valid(data->det_pin)) - at91_set_gpio_input(data->det_pin, 1); - - nand_data = *data; - platform_device_register(&at91cap9_nand_device); -} -#else -void __init at91_add_device_nand(struct atmel_nand_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * TWI (i2c) - * -------------------------------------------------------------------- */ - -/* - * Prefer the GPIO code since the TWI controller isn't robust - * (gets overruns and underruns under load) and can only issue - * repeated STARTs in one scenario (the driver doesn't yet handle them). - */ -#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) - -static struct i2c_gpio_platform_data pdata = { - .sda_pin = AT91_PIN_PB4, - .sda_is_open_drain = 1, - .scl_pin = AT91_PIN_PB5, - .scl_is_open_drain = 1, - .udelay = 2, /* ~100 kHz */ -}; - -static struct platform_device at91cap9_twi_device = { - .name = "i2c-gpio", - .id = -1, - .dev.platform_data = &pdata, -}; - -void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) -{ - at91_set_GPIO_periph(AT91_PIN_PB4, 1); /* TWD (SDA) */ - at91_set_multi_drive(AT91_PIN_PB4, 1); - - at91_set_GPIO_periph(AT91_PIN_PB5, 1); /* TWCK (SCL) */ - at91_set_multi_drive(AT91_PIN_PB5, 1); - - i2c_register_board_info(0, devices, nr_devices); - platform_device_register(&at91cap9_twi_device); -} - -#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE) - -static struct resource twi_resources[] = { - [0] = { - .start = AT91CAP9_BASE_TWI, - .end = AT91CAP9_BASE_TWI + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_ID_TWI, - .end = AT91CAP9_ID_TWI, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91cap9_twi_device = { - .name = "at91_i2c", - .id = -1, - .resource = twi_resources, - .num_resources = ARRAY_SIZE(twi_resources), -}; - -void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) -{ - /* pins used for TWI interface */ - at91_set_B_periph(AT91_PIN_PB4, 0); /* TWD */ - at91_set_multi_drive(AT91_PIN_PB4, 1); - - at91_set_B_periph(AT91_PIN_PB5, 0); /* TWCK */ - at91_set_multi_drive(AT91_PIN_PB5, 1); - - i2c_register_board_info(0, devices, nr_devices); - platform_device_register(&at91cap9_twi_device); -} -#else -void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {} -#endif - -/* -------------------------------------------------------------------- - * SPI - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) -static u64 spi_dmamask = DMA_BIT_MASK(32); - -static struct resource spi0_resources[] = { - [0] = { - .start = AT91CAP9_BASE_SPI0, - .end = AT91CAP9_BASE_SPI0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_ID_SPI0, - .end = AT91CAP9_ID_SPI0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91cap9_spi0_device = { - .name = "atmel_spi", - .id = 0, - .dev = { - .dma_mask = &spi_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = spi0_resources, - .num_resources = ARRAY_SIZE(spi0_resources), -}; - -static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA5, AT91_PIN_PA3, AT91_PIN_PD0, AT91_PIN_PD1 }; - -static struct resource spi1_resources[] = { - [0] = { - .start = AT91CAP9_BASE_SPI1, - .end = AT91CAP9_BASE_SPI1 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_ID_SPI1, - .end = AT91CAP9_ID_SPI1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91cap9_spi1_device = { - .name = "atmel_spi", - .id = 1, - .dev = { - .dma_mask = &spi_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = spi1_resources, - .num_resources = ARRAY_SIZE(spi1_resources), -}; - -static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB15, AT91_PIN_PB16, AT91_PIN_PB17, AT91_PIN_PB18 }; - -void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) -{ - int i; - unsigned long cs_pin; - short enable_spi0 = 0; - short enable_spi1 = 0; - - /* Choose SPI chip-selects */ - for (i = 0; i < nr_devices; i++) { - if (devices[i].controller_data) - cs_pin = (unsigned long) devices[i].controller_data; - else if (devices[i].bus_num == 0) - cs_pin = spi0_standard_cs[devices[i].chip_select]; - else - cs_pin = spi1_standard_cs[devices[i].chip_select]; - - if (devices[i].bus_num == 0) - enable_spi0 = 1; - else - enable_spi1 = 1; - - /* enable chip-select pin */ - at91_set_gpio_output(cs_pin, 1); - - /* pass chip-select pin to driver */ - devices[i].controller_data = (void *) cs_pin; - } - - spi_register_board_info(devices, nr_devices); - - /* Configure SPI bus(es) */ - if (enable_spi0) { - at91_set_B_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */ - at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ - at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */ - - platform_device_register(&at91cap9_spi0_device); - } - if (enable_spi1) { - at91_set_A_periph(AT91_PIN_PB12, 0); /* SPI1_MISO */ - at91_set_A_periph(AT91_PIN_PB13, 0); /* SPI1_MOSI */ - at91_set_A_periph(AT91_PIN_PB14, 0); /* SPI1_SPCK */ - - platform_device_register(&at91cap9_spi1_device); - } -} -#else -void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {} -#endif - - -/* -------------------------------------------------------------------- - * Timer/Counter block - * -------------------------------------------------------------------- */ - -#ifdef CONFIG_ATMEL_TCLIB - -static struct resource tcb_resources[] = { - [0] = { - .start = AT91CAP9_BASE_TCB0, - .end = AT91CAP9_BASE_TCB0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_ID_TCB, - .end = AT91CAP9_ID_TCB, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91cap9_tcb_device = { - .name = "atmel_tcb", - .id = 0, - .resource = tcb_resources, - .num_resources = ARRAY_SIZE(tcb_resources), -}; - -static void __init at91_add_device_tc(void) -{ - platform_device_register(&at91cap9_tcb_device); -} -#else -static void __init at91_add_device_tc(void) { } -#endif - - -/* -------------------------------------------------------------------- - * RTT - * -------------------------------------------------------------------- */ - -static struct resource rtt_resources[] = { - { - .start = AT91CAP9_BASE_RTT, - .end = AT91CAP9_BASE_RTT + SZ_16 - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device at91cap9_rtt_device = { - .name = "at91_rtt", - .id = 0, - .resource = rtt_resources, - .num_resources = ARRAY_SIZE(rtt_resources), -}; - -static void __init at91_add_device_rtt(void) -{ - platform_device_register(&at91cap9_rtt_device); -} - - -/* -------------------------------------------------------------------- - * Watchdog - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE) -static struct resource wdt_resources[] = { - { - .start = AT91CAP9_BASE_WDT, - .end = AT91CAP9_BASE_WDT + SZ_16 - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device at91cap9_wdt_device = { - .name = "at91_wdt", - .id = -1, - .resource = wdt_resources, - .num_resources = ARRAY_SIZE(wdt_resources), -}; - -static void __init at91_add_device_watchdog(void) -{ - platform_device_register(&at91cap9_wdt_device); -} -#else -static void __init at91_add_device_watchdog(void) {} -#endif - - -/* -------------------------------------------------------------------- - * PWM - * --------------------------------------------------------------------*/ - -#if defined(CONFIG_ATMEL_PWM) -static u32 pwm_mask; - -static struct resource pwm_resources[] = { - [0] = { - .start = AT91CAP9_BASE_PWMC, - .end = AT91CAP9_BASE_PWMC + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_ID_PWMC, - .end = AT91CAP9_ID_PWMC, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91cap9_pwm0_device = { - .name = "atmel_pwm", - .id = -1, - .dev = { - .platform_data = &pwm_mask, - }, - .resource = pwm_resources, - .num_resources = ARRAY_SIZE(pwm_resources), -}; - -void __init at91_add_device_pwm(u32 mask) -{ - if (mask & (1 << AT91_PWM0)) - at91_set_A_periph(AT91_PIN_PB19, 1); /* enable PWM0 */ - - if (mask & (1 << AT91_PWM1)) - at91_set_B_periph(AT91_PIN_PB8, 1); /* enable PWM1 */ - - if (mask & (1 << AT91_PWM2)) - at91_set_B_periph(AT91_PIN_PC29, 1); /* enable PWM2 */ - - if (mask & (1 << AT91_PWM3)) - at91_set_B_periph(AT91_PIN_PA11, 1); /* enable PWM3 */ - - pwm_mask = mask; - - platform_device_register(&at91cap9_pwm0_device); -} -#else -void __init at91_add_device_pwm(u32 mask) {} -#endif - - - -/* -------------------------------------------------------------------- - * AC97 - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_SND_ATMEL_AC97C) || defined(CONFIG_SND_ATMEL_AC97C_MODULE) -static u64 ac97_dmamask = DMA_BIT_MASK(32); -static struct ac97c_platform_data ac97_data; - -static struct resource ac97_resources[] = { - [0] = { - .start = AT91CAP9_BASE_AC97C, - .end = AT91CAP9_BASE_AC97C + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_ID_AC97C, - .end = AT91CAP9_ID_AC97C, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91cap9_ac97_device = { - .name = "atmel_ac97c", - .id = 1, - .dev = { - .dma_mask = &ac97_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &ac97_data, - }, - .resource = ac97_resources, - .num_resources = ARRAY_SIZE(ac97_resources), -}; - -void __init at91_add_device_ac97(struct ac97c_platform_data *data) -{ - if (!data) - return; - - at91_set_A_periph(AT91_PIN_PA6, 0); /* AC97FS */ - at91_set_A_periph(AT91_PIN_PA7, 0); /* AC97CK */ - at91_set_A_periph(AT91_PIN_PA8, 0); /* AC97TX */ - at91_set_A_periph(AT91_PIN_PA9, 0); /* AC97RX */ - - /* reset */ - if (gpio_is_valid(data->reset_pin)) - at91_set_gpio_output(data->reset_pin, 0); - - ac97_data = *data; - platform_device_register(&at91cap9_ac97_device); -} -#else -void __init at91_add_device_ac97(struct ac97c_platform_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * LCD Controller - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE) -static u64 lcdc_dmamask = DMA_BIT_MASK(32); -static struct atmel_lcdfb_info lcdc_data; - -static struct resource lcdc_resources[] = { - [0] = { - .start = AT91CAP9_LCDC_BASE, - .end = AT91CAP9_LCDC_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_ID_LCDC, - .end = AT91CAP9_ID_LCDC, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91_lcdc_device = { - .name = "atmel_lcdfb", - .id = 0, - .dev = { - .dma_mask = &lcdc_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &lcdc_data, - }, - .resource = lcdc_resources, - .num_resources = ARRAY_SIZE(lcdc_resources), -}; - -void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) -{ - if (!data) - return; - - if (cpu_is_at91cap9_revB()) - irq_set_irq_type(AT91CAP9_ID_LCDC, IRQ_TYPE_LEVEL_HIGH); - - at91_set_A_periph(AT91_PIN_PC1, 0); /* LCDHSYNC */ - at91_set_A_periph(AT91_PIN_PC2, 0); /* LCDDOTCK */ - at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDDEN */ - at91_set_B_periph(AT91_PIN_PB9, 0); /* LCDCC */ - at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDD2 */ - at91_set_A_periph(AT91_PIN_PC7, 0); /* LCDD3 */ - at91_set_A_periph(AT91_PIN_PC8, 0); /* LCDD4 */ - at91_set_A_periph(AT91_PIN_PC9, 0); /* LCDD5 */ - at91_set_A_periph(AT91_PIN_PC10, 0); /* LCDD6 */ - at91_set_A_periph(AT91_PIN_PC11, 0); /* LCDD7 */ - at91_set_A_periph(AT91_PIN_PC14, 0); /* LCDD10 */ - at91_set_A_periph(AT91_PIN_PC15, 0); /* LCDD11 */ - at91_set_A_periph(AT91_PIN_PC16, 0); /* LCDD12 */ - at91_set_A_periph(AT91_PIN_PC17, 0); /* LCDD13 */ - at91_set_A_periph(AT91_PIN_PC18, 0); /* LCDD14 */ - at91_set_A_periph(AT91_PIN_PC19, 0); /* LCDD15 */ - at91_set_A_periph(AT91_PIN_PC22, 0); /* LCDD18 */ - at91_set_A_periph(AT91_PIN_PC23, 0); /* LCDD19 */ - at91_set_A_periph(AT91_PIN_PC24, 0); /* LCDD20 */ - at91_set_A_periph(AT91_PIN_PC25, 0); /* LCDD21 */ - at91_set_A_periph(AT91_PIN_PC26, 0); /* LCDD22 */ - at91_set_A_periph(AT91_PIN_PC27, 0); /* LCDD23 */ - - lcdc_data = *data; - platform_device_register(&at91_lcdc_device); -} -#else -void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {} -#endif - - -/* -------------------------------------------------------------------- - * SSC -- Synchronous Serial Controller - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE) -static u64 ssc0_dmamask = DMA_BIT_MASK(32); - -static struct resource ssc0_resources[] = { - [0] = { - .start = AT91CAP9_BASE_SSC0, - .end = AT91CAP9_BASE_SSC0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_ID_SSC0, - .end = AT91CAP9_ID_SSC0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91cap9_ssc0_device = { - .name = "ssc", - .id = 0, - .dev = { - .dma_mask = &ssc0_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = ssc0_resources, - .num_resources = ARRAY_SIZE(ssc0_resources), -}; - -static inline void configure_ssc0_pins(unsigned pins) -{ - if (pins & ATMEL_SSC_TF) - at91_set_A_periph(AT91_PIN_PB0, 1); - if (pins & ATMEL_SSC_TK) - at91_set_A_periph(AT91_PIN_PB1, 1); - if (pins & ATMEL_SSC_TD) - at91_set_A_periph(AT91_PIN_PB2, 1); - if (pins & ATMEL_SSC_RD) - at91_set_A_periph(AT91_PIN_PB3, 1); - if (pins & ATMEL_SSC_RK) - at91_set_A_periph(AT91_PIN_PB4, 1); - if (pins & ATMEL_SSC_RF) - at91_set_A_periph(AT91_PIN_PB5, 1); -} - -static u64 ssc1_dmamask = DMA_BIT_MASK(32); - -static struct resource ssc1_resources[] = { - [0] = { - .start = AT91CAP9_BASE_SSC1, - .end = AT91CAP9_BASE_SSC1 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_ID_SSC1, - .end = AT91CAP9_ID_SSC1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91cap9_ssc1_device = { - .name = "ssc", - .id = 1, - .dev = { - .dma_mask = &ssc1_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = ssc1_resources, - .num_resources = ARRAY_SIZE(ssc1_resources), -}; - -static inline void configure_ssc1_pins(unsigned pins) -{ - if (pins & ATMEL_SSC_TF) - at91_set_A_periph(AT91_PIN_PB6, 1); - if (pins & ATMEL_SSC_TK) - at91_set_A_periph(AT91_PIN_PB7, 1); - if (pins & ATMEL_SSC_TD) - at91_set_A_periph(AT91_PIN_PB8, 1); - if (pins & ATMEL_SSC_RD) - at91_set_A_periph(AT91_PIN_PB9, 1); - if (pins & ATMEL_SSC_RK) - at91_set_A_periph(AT91_PIN_PB10, 1); - if (pins & ATMEL_SSC_RF) - at91_set_A_periph(AT91_PIN_PB11, 1); -} - -/* - * SSC controllers are accessed through library code, instead of any - * kind of all-singing/all-dancing driver. For example one could be - * used by a particular I2S audio codec's driver, while another one - * on the same system might be used by a custom data capture driver. - */ -void __init at91_add_device_ssc(unsigned id, unsigned pins) -{ - struct platform_device *pdev; - - /* - * NOTE: caller is responsible for passing information matching - * "pins" to whatever will be using each particular controller. - */ - switch (id) { - case AT91CAP9_ID_SSC0: - pdev = &at91cap9_ssc0_device; - configure_ssc0_pins(pins); - break; - case AT91CAP9_ID_SSC1: - pdev = &at91cap9_ssc1_device; - configure_ssc1_pins(pins); - break; - default: - return; - } - - platform_device_register(pdev); -} - -#else -void __init at91_add_device_ssc(unsigned id, unsigned pins) {} -#endif - - -/* -------------------------------------------------------------------- - * UART - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_SERIAL_ATMEL) -static struct resource dbgu_resources[] = { - [0] = { - .start = AT91CAP9_BASE_DBGU, - .end = AT91CAP9_BASE_DBGU + SZ_512 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91_ID_SYS, - .end = AT91_ID_SYS, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data dbgu_data = { - .use_dma_tx = 0, - .use_dma_rx = 0, /* DBGU not capable of receive DMA */ -}; - -static u64 dbgu_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at91cap9_dbgu_device = { - .name = "atmel_usart", - .id = 0, - .dev = { - .dma_mask = &dbgu_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &dbgu_data, - }, - .resource = dbgu_resources, - .num_resources = ARRAY_SIZE(dbgu_resources), -}; - -static inline void configure_dbgu_pins(void) -{ - at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */ - at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */ -} - -static struct resource uart0_resources[] = { - [0] = { - .start = AT91CAP9_BASE_US0, - .end = AT91CAP9_BASE_US0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_ID_US0, - .end = AT91CAP9_ID_US0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data uart0_data = { - .use_dma_tx = 1, - .use_dma_rx = 1, -}; - -static u64 uart0_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at91cap9_uart0_device = { - .name = "atmel_usart", - .id = 1, - .dev = { - .dma_mask = &uart0_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &uart0_data, - }, - .resource = uart0_resources, - .num_resources = ARRAY_SIZE(uart0_resources), -}; - -static inline void configure_usart0_pins(unsigned pins) -{ - at91_set_A_periph(AT91_PIN_PA22, 1); /* TXD0 */ - at91_set_A_periph(AT91_PIN_PA23, 0); /* RXD0 */ - - if (pins & ATMEL_UART_RTS) - at91_set_A_periph(AT91_PIN_PA24, 0); /* RTS0 */ - if (pins & ATMEL_UART_CTS) - at91_set_A_periph(AT91_PIN_PA25, 0); /* CTS0 */ -} - -static struct resource uart1_resources[] = { - [0] = { - .start = AT91CAP9_BASE_US1, - .end = AT91CAP9_BASE_US1 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_ID_US1, - .end = AT91CAP9_ID_US1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data uart1_data = { - .use_dma_tx = 1, - .use_dma_rx = 1, -}; - -static u64 uart1_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at91cap9_uart1_device = { - .name = "atmel_usart", - .id = 2, - .dev = { - .dma_mask = &uart1_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &uart1_data, - }, - .resource = uart1_resources, - .num_resources = ARRAY_SIZE(uart1_resources), -}; - -static inline void configure_usart1_pins(unsigned pins) -{ - at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */ - at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */ - - if (pins & ATMEL_UART_RTS) - at91_set_B_periph(AT91_PIN_PD7, 0); /* RTS1 */ - if (pins & ATMEL_UART_CTS) - at91_set_B_periph(AT91_PIN_PD8, 0); /* CTS1 */ -} - -static struct resource uart2_resources[] = { - [0] = { - .start = AT91CAP9_BASE_US2, - .end = AT91CAP9_BASE_US2 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_ID_US2, - .end = AT91CAP9_ID_US2, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data uart2_data = { - .use_dma_tx = 1, - .use_dma_rx = 1, -}; - -static u64 uart2_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at91cap9_uart2_device = { - .name = "atmel_usart", - .id = 3, - .dev = { - .dma_mask = &uart2_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &uart2_data, - }, - .resource = uart2_resources, - .num_resources = ARRAY_SIZE(uart2_resources), -}; - -static inline void configure_usart2_pins(unsigned pins) -{ - at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */ - at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */ - - if (pins & ATMEL_UART_RTS) - at91_set_B_periph(AT91_PIN_PD5, 0); /* RTS2 */ - if (pins & ATMEL_UART_CTS) - at91_set_B_periph(AT91_PIN_PD6, 0); /* CTS2 */ -} - -static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ -struct platform_device *atmel_default_console_device; /* the serial console device */ - -void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) -{ - struct platform_device *pdev; - struct atmel_uart_data *pdata; - - switch (id) { - case 0: /* DBGU */ - pdev = &at91cap9_dbgu_device; - configure_dbgu_pins(); - break; - case AT91CAP9_ID_US0: - pdev = &at91cap9_uart0_device; - configure_usart0_pins(pins); - break; - case AT91CAP9_ID_US1: - pdev = &at91cap9_uart1_device; - configure_usart1_pins(pins); - break; - case AT91CAP9_ID_US2: - pdev = &at91cap9_uart2_device; - configure_usart2_pins(pins); - break; - default: - return; - } - pdata = pdev->dev.platform_data; - pdata->num = portnr; /* update to mapped ID */ - - if (portnr < ATMEL_MAX_UART) - at91_uarts[portnr] = pdev; -} - -void __init at91_set_serial_console(unsigned portnr) -{ - if (portnr < ATMEL_MAX_UART) { - atmel_default_console_device = at91_uarts[portnr]; - at91cap9_set_console_clock(at91_uarts[portnr]->id); - } -} - -void __init at91_add_device_serial(void) -{ - int i; - - for (i = 0; i < ATMEL_MAX_UART; i++) { - if (at91_uarts[i]) - platform_device_register(at91_uarts[i]); - } - - if (!atmel_default_console_device) - printk(KERN_INFO "AT91: No default serial console defined.\n"); -} -#else -void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} -void __init at91_set_serial_console(unsigned portnr) {} -void __init at91_add_device_serial(void) {} -#endif - - -/* -------------------------------------------------------------------- */ -/* - * These devices are always present and don't need any board-specific - * setup. - */ -static int __init at91_add_standard_devices(void) -{ - at91_add_device_rtt(); - at91_add_device_watchdog(); - at91_add_device_tc(); - return 0; -} - -arch_initcall(at91_add_standard_devices); diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index 99c3174e24a..dd6e2de1342 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -289,6 +289,15 @@ static struct at91_gpio_bank at91rm9200_gpio[] __initdata = { } }; +static void at91rm9200_idle(void) +{ + /* + * Disable the processor clock. The processor will be automatically + * re-enabled by an interrupt or by a reset. + */ + at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK); +} + static void at91rm9200_restart(char mode, const char *cmd) { /* @@ -314,6 +323,7 @@ static void __init at91rm9200_ioremap_registers(void) static void __init at91rm9200_initialize(void) { + arm_pm_idle = at91rm9200_idle; arm_pm_restart = at91rm9200_restart; at91_extern_irq = (1 << AT91RM9200_ID_IRQ0) | (1 << AT91RM9200_ID_IRQ1) | (1 << AT91RM9200_ID_IRQ2) | (1 << AT91RM9200_ID_IRQ3) diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index 18bacec2b09..97676bdae99 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -83,7 +83,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {} * USB Device (Gadget) * -------------------------------------------------------------------- */ -#ifdef CONFIG_USB_AT91 +#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE) static struct at91_udc_data udc_data; static struct resource udc_resources[] = { diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index d4036ba4361..9ac8c6fe336 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -12,6 +12,7 @@ #include <linux/module.h> +#include <asm/proc-fns.h> #include <asm/irq.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -328,8 +329,15 @@ static void __init at91sam9260_ioremap_registers(void) at91sam9_ioremap_smc(0, AT91SAM9260_BASE_SMC); } +static void at91sam9260_idle(void) +{ + at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK); + cpu_do_idle(); +} + static void __init at91sam9260_initialize(void) { + arm_pm_idle = at91sam9260_idle; arm_pm_restart = at91sam9_alt_restart; at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1) | (1 << AT91SAM9260_ID_IRQ2); diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 642ccb6d26b..5a24f0b4554 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -84,7 +84,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {} * USB Device (Gadget) * -------------------------------------------------------------------- */ -#ifdef CONFIG_USB_AT91 +#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE) static struct at91_udc_data udc_data; static struct resource udc_resources[] = { @@ -1215,8 +1215,7 @@ void __init at91_add_device_serial(void) {} * CF/IDE * -------------------------------------------------------------------- */ -#if defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE) || \ - defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) || \ +#if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) || \ defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE) static struct at91_cf_data cf0_data; @@ -1313,10 +1312,8 @@ void __init at91_add_device_cf(struct at91_cf_data *data) if (data->flags & AT91_CF_TRUE_IDE) #if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) pdev->name = "pata_at91"; -#elif defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE) - pdev->name = "at91_ide"; #else -#warning "board requires AT91_CF_TRUE_IDE: enable either at91_ide or pata_at91" +#warning "board requires AT91_CF_TRUE_IDE: enable pata_at91" #endif else pdev->name = "at91_cf"; diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index 023c2ff138d..ab76868f01f 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -12,6 +12,7 @@ #include <linux/module.h> +#include <asm/proc-fns.h> #include <asm/irq.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -286,8 +287,15 @@ static void __init at91sam9261_ioremap_registers(void) at91sam9_ioremap_smc(0, AT91SAM9261_BASE_SMC); } +static void at91sam9261_idle(void) +{ + at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK); + cpu_do_idle(); +} + static void __init at91sam9261_initialize(void) { + arm_pm_idle = at91sam9261_idle; arm_pm_restart = at91sam9_alt_restart; at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1) | (1 << AT91SAM9261_ID_IRQ2); diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index fc59cbdb0e3..1e28bed8f42 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -87,7 +87,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {} * USB Device (Gadget) * -------------------------------------------------------------------- */ -#ifdef CONFIG_USB_AT91 +#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE) static struct at91_udc_data udc_data; static struct resource udc_resources[] = { diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index 75e876c258a..247ab633abc 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -12,6 +12,7 @@ #include <linux/module.h> +#include <asm/proc-fns.h> #include <asm/irq.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -307,8 +308,15 @@ static void __init at91sam9263_ioremap_registers(void) at91sam9_ioremap_smc(1, AT91SAM9263_BASE_SMC1); } +static void at91sam9263_idle(void) +{ + at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK); + cpu_do_idle(); +} + static void __init at91sam9263_initialize(void) { + arm_pm_idle = at91sam9263_idle; arm_pm_restart = at91sam9_alt_restart; at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1); diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index 7b46b278702..70709ab0102 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -92,7 +92,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {} * USB Device (Gadget) * -------------------------------------------------------------------- */ -#ifdef CONFIG_USB_AT91 +#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE) static struct at91_udc_data udc_data; static struct resource udc_resources[] = { @@ -355,8 +355,8 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} * Compact Flash (PCMCIA or IDE) * -------------------------------------------------------------------- */ -#if defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE) || \ - defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE) +#if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) || \ + defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE) static struct at91_cf_data cf0_data; @@ -450,7 +450,7 @@ void __init at91_add_device_cf(struct at91_cf_data *data) at91_set_A_periph(AT91_PIN_PD9, 0); /* CFCE2 */ at91_set_A_periph(AT91_PIN_PD14, 0); /* CFNRW */ - pdev->name = (data->flags & AT91_CF_TRUE_IDE) ? "at91_ide" : "at91_cf"; + pdev->name = (data->flags & AT91_CF_TRUE_IDE) ? "pata_at91" : "at91_cf"; platform_device_register(pdev); } #else @@ -891,7 +891,8 @@ static struct platform_device at91sam9263_isi_device = { .num_resources = ARRAY_SIZE(isi_resources), }; -void __init at91_add_device_isi(void) +void __init at91_add_device_isi(struct isi_platform_data *data, + bool use_pck_as_mck) { at91_set_A_periph(AT91_PIN_PE0, 0); /* ISI_D0 */ at91_set_A_periph(AT91_PIN_PE1, 0); /* ISI_D1 */ @@ -904,14 +905,20 @@ void __init at91_add_device_isi(void) at91_set_A_periph(AT91_PIN_PE8, 0); /* ISI_PCK */ at91_set_A_periph(AT91_PIN_PE9, 0); /* ISI_HSYNC */ at91_set_A_periph(AT91_PIN_PE10, 0); /* ISI_VSYNC */ - at91_set_B_periph(AT91_PIN_PE11, 0); /* ISI_MCK (PCK3) */ at91_set_B_periph(AT91_PIN_PE12, 0); /* ISI_PD8 */ at91_set_B_periph(AT91_PIN_PE13, 0); /* ISI_PD9 */ at91_set_B_periph(AT91_PIN_PE14, 0); /* ISI_PD10 */ at91_set_B_periph(AT91_PIN_PE15, 0); /* ISI_PD11 */ + + if (use_pck_as_mck) { + at91_set_B_periph(AT91_PIN_PE11, 0); /* ISI_MCK (PCK3) */ + + /* TODO: register the PCK for ISI_MCK and set its parent */ + } } #else -void __init at91_add_device_isi(void) {} +void __init at91_add_device_isi(struct isi_platform_data *data, + bool use_pck_as_mck) {} #endif diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index 1cb6a96b1c1..5b12192e52e 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -317,6 +317,12 @@ static struct at91_gpio_bank at91sam9g45_gpio[] __initdata = { } }; +static void at91sam9g45_idle(void) +{ + at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK); + cpu_do_idle(); +} + /* -------------------------------------------------------------------- * AT91SAM9G45 processor initialization * -------------------------------------------------------------------- */ @@ -337,6 +343,7 @@ static void __init at91sam9g45_ioremap_registers(void) static void __init at91sam9g45_initialize(void) { + arm_pm_idle = at91sam9g45_idle; arm_pm_restart = at91sam9g45_restart; at91_extern_irq = (1 << AT91SAM9G45_ID_IRQ0); diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index b7582dd10dc..bd4e68cd3e2 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -14,6 +14,7 @@ #include <linux/dma-mapping.h> #include <linux/gpio.h> +#include <linux/clk.h> #include <linux/platform_device.h> #include <linux/i2c-gpio.h> #include <linux/atmel-mci.h> @@ -28,7 +29,10 @@ #include <mach/at_hdmac.h> #include <mach/atmel-mci.h> +#include <media/atmel-isi.h> + #include "generic.h" +#include "clock.h" /* -------------------------------------------------------------------- @@ -38,10 +42,6 @@ #if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE) static u64 hdmac_dmamask = DMA_BIT_MASK(32); -static struct at_dma_platform_data atdma_pdata = { - .nr_channels = 8, -}; - static struct resource hdmac_resources[] = { [0] = { .start = AT91SAM9G45_BASE_DMA, @@ -56,12 +56,11 @@ static struct resource hdmac_resources[] = { }; static struct platform_device at_hdmac_device = { - .name = "at_hdmac", + .name = "at91sam9g45_dma", .id = -1, .dev = { .dma_mask = &hdmac_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &atdma_pdata, }, .resource = hdmac_resources, .num_resources = ARRAY_SIZE(hdmac_resources), @@ -69,9 +68,15 @@ static struct platform_device at_hdmac_device = { void __init at91_add_device_hdmac(void) { - dma_cap_set(DMA_MEMCPY, atdma_pdata.cap_mask); - dma_cap_set(DMA_SLAVE, atdma_pdata.cap_mask); - platform_device_register(&at_hdmac_device); +#if defined(CONFIG_OF) + struct device_node *of_node = + of_find_node_by_name(NULL, "dma-controller"); + + if (of_node) + of_node_put(of_node); + else +#endif + platform_device_register(&at_hdmac_device); } #else void __init at91_add_device_hdmac(void) {} @@ -869,6 +874,96 @@ void __init at91_add_device_ac97(struct ac97c_platform_data *data) void __init at91_add_device_ac97(struct ac97c_platform_data *data) {} #endif +/* -------------------------------------------------------------------- + * Image Sensor Interface + * -------------------------------------------------------------------- */ +#if defined(CONFIG_VIDEO_ATMEL_ISI) || defined(CONFIG_VIDEO_ATMEL_ISI_MODULE) +static u64 isi_dmamask = DMA_BIT_MASK(32); +static struct isi_platform_data isi_data; + +struct resource isi_resources[] = { + [0] = { + .start = AT91SAM9G45_BASE_ISI, + .end = AT91SAM9G45_BASE_ISI + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9G45_ID_ISI, + .end = AT91SAM9G45_ID_ISI, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9g45_isi_device = { + .name = "atmel_isi", + .id = 0, + .dev = { + .dma_mask = &isi_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &isi_data, + }, + .resource = isi_resources, + .num_resources = ARRAY_SIZE(isi_resources), +}; + +static struct clk_lookup isi_mck_lookups[] = { + CLKDEV_CON_DEV_ID("isi_mck", "atmel_isi.0", NULL), +}; + +void __init at91_add_device_isi(struct isi_platform_data *data, + bool use_pck_as_mck) +{ + struct clk *pck; + struct clk *parent; + + if (!data) + return; + isi_data = *data; + + at91_set_A_periph(AT91_PIN_PB20, 0); /* ISI_D0 */ + at91_set_A_periph(AT91_PIN_PB21, 0); /* ISI_D1 */ + at91_set_A_periph(AT91_PIN_PB22, 0); /* ISI_D2 */ + at91_set_A_periph(AT91_PIN_PB23, 0); /* ISI_D3 */ + at91_set_A_periph(AT91_PIN_PB24, 0); /* ISI_D4 */ + at91_set_A_periph(AT91_PIN_PB25, 0); /* ISI_D5 */ + at91_set_A_periph(AT91_PIN_PB26, 0); /* ISI_D6 */ + at91_set_A_periph(AT91_PIN_PB27, 0); /* ISI_D7 */ + at91_set_A_periph(AT91_PIN_PB28, 0); /* ISI_PCK */ + at91_set_A_periph(AT91_PIN_PB30, 0); /* ISI_HSYNC */ + at91_set_A_periph(AT91_PIN_PB29, 0); /* ISI_VSYNC */ + at91_set_B_periph(AT91_PIN_PB8, 0); /* ISI_PD8 */ + at91_set_B_periph(AT91_PIN_PB9, 0); /* ISI_PD9 */ + at91_set_B_periph(AT91_PIN_PB10, 0); /* ISI_PD10 */ + at91_set_B_periph(AT91_PIN_PB11, 0); /* ISI_PD11 */ + + platform_device_register(&at91sam9g45_isi_device); + + if (use_pck_as_mck) { + at91_set_B_periph(AT91_PIN_PB31, 0); /* ISI_MCK (PCK1) */ + + pck = clk_get(NULL, "pck1"); + parent = clk_get(NULL, "plla"); + + BUG_ON(IS_ERR(pck) || IS_ERR(parent)); + + if (clk_set_parent(pck, parent)) { + pr_err("Failed to set PCK's parent\n"); + } else { + /* Register PCK as ISI_MCK */ + isi_mck_lookups[0].clk = pck; + clkdev_add_table(isi_mck_lookups, + ARRAY_SIZE(isi_mck_lookups)); + } + + clk_put(pck); + clk_put(parent); + } +} +#else +void __init at91_add_device_isi(struct isi_platform_data *data, + bool use_pck_as_mck) {} +#endif + /* -------------------------------------------------------------------- * LCD Controller diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c index d2c91a841cb..fd60e226a98 100644 --- a/arch/arm/mach-at91/at91sam9rl.c +++ b/arch/arm/mach-at91/at91sam9rl.c @@ -11,6 +11,7 @@ #include <linux/module.h> +#include <asm/proc-fns.h> #include <asm/irq.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -291,8 +292,15 @@ static void __init at91sam9rl_ioremap_registers(void) at91sam9_ioremap_smc(0, AT91SAM9RL_BASE_SMC); } +static void at91sam9rl_idle(void) +{ + at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK); + cpu_do_idle(); +} + static void __init at91sam9rl_initialize(void) { + arm_pm_idle = at91sam9rl_idle; arm_pm_restart = at91sam9_alt_restart; at91_extern_irq = (1 << AT91SAM9RL_ID_IRQ0); diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index 61908dce978..9be71c11d0f 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -33,10 +33,6 @@ #if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE) static u64 hdmac_dmamask = DMA_BIT_MASK(32); -static struct at_dma_platform_data atdma_pdata = { - .nr_channels = 2, -}; - static struct resource hdmac_resources[] = { [0] = { .start = AT91SAM9RL_BASE_DMA, @@ -51,12 +47,11 @@ static struct resource hdmac_resources[] = { }; static struct platform_device at_hdmac_device = { - .name = "at_hdmac", + .name = "at91sam9rl_dma", .id = -1, .dev = { .dma_mask = &hdmac_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &atdma_pdata, }, .resource = hdmac_resources, .num_resources = ARRAY_SIZE(hdmac_resources), @@ -64,7 +59,6 @@ static struct platform_device at_hdmac_device = { void __init at91_add_device_hdmac(void) { - dma_cap_set(DMA_MEMCPY, atdma_pdata.cap_mask); platform_device_register(&at_hdmac_device); } #else diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c index 56ba3bd035a..0154b7f44ff 100644 --- a/arch/arm/mach-at91/at91x40.c +++ b/arch/arm/mach-at91/at91x40.c @@ -13,6 +13,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/irq.h> +#include <asm/proc-fns.h> #include <asm/mach/arch.h> #include <mach/at91x40.h> #include <mach/at91_st.h> @@ -37,8 +38,19 @@ unsigned long clk_get_rate(struct clk *clk) return AT91X40_MASTER_CLOCK; } +static void at91x40_idle(void) +{ + /* + * Disable the processor clock. The processor will be automatically + * re-enabled by an interrupt or by a reset. + */ + at91_sys_write(AT91_PS_CR, AT91_PS_CR_CPU); + cpu_do_idle(); +} + void __init at91x40_initialize(unsigned long main_clock) { + arm_pm_idle = at91x40_idle; at91_extern_irq = (1 << AT91X40_ID_IRQ0) | (1 << AT91X40_ID_IRQ1) | (1 << AT91X40_ID_IRQ2); } diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c deleted file mode 100644 index ac3de4f7c31..00000000000 --- a/arch/arm/mach-at91/board-cap9adk.c +++ /dev/null @@ -1,396 +0,0 @@ -/* - * linux/arch/arm/mach-at91/board-cap9adk.c - * - * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com> - * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com> - * Copyright (C) 2005 SAN People - * Copyright (C) 2007 Atmel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/types.h> -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/spi/spi.h> -#include <linux/spi/ads7846.h> -#include <linux/fb.h> -#include <linux/mtd/physmap.h> - -#include <video/atmel_lcdc.h> - -#include <mach/hardware.h> -#include <asm/setup.h> -#include <asm/mach-types.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include <mach/board.h> -#include <mach/at91cap9_matrix.h> -#include <mach/at91sam9_smc.h> -#include <mach/system_rev.h> - -#include "sam9_smc.h" -#include "generic.h" - - -static void __init cap9adk_init_early(void) -{ - /* Initialize processor: 12 MHz crystal */ - at91_initialize(12000000); - - /* Setup the LEDs: USER1 and USER2 LED for cpu/timer... */ - at91_init_leds(AT91_PIN_PA10, AT91_PIN_PA11); - /* ... POWER LED always on */ - at91_set_gpio_output(AT91_PIN_PC29, 1); - - /* Setup the serial ports and console */ - at91_register_uart(0, 0, 0); /* DBGU = ttyS0 */ - at91_set_serial_console(0); -} - -/* - * USB Host port - */ -static struct at91_usbh_data __initdata cap9adk_usbh_data = { - .ports = 2, - .vbus_pin = {-EINVAL, -EINVAL}, - .overcurrent_pin= {-EINVAL, -EINVAL}, -}; - -/* - * USB HS Device port - */ -static struct usba_platform_data __initdata cap9adk_usba_udc_data = { - .vbus_pin = AT91_PIN_PB31, -}; - -/* - * ADS7846 Touchscreen - */ -#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) -static int ads7843_pendown_state(void) -{ - return !at91_get_gpio_value(AT91_PIN_PC4); /* Touchscreen PENIRQ */ -} - -static struct ads7846_platform_data ads_info = { - .model = 7843, - .x_min = 150, - .x_max = 3830, - .y_min = 190, - .y_max = 3830, - .vref_delay_usecs = 100, - .x_plate_ohms = 450, - .y_plate_ohms = 250, - .pressure_max = 15000, - .debounce_max = 1, - .debounce_rep = 0, - .debounce_tol = (~0), - .get_pendown_state = ads7843_pendown_state, -}; - -static void __init cap9adk_add_device_ts(void) -{ - at91_set_gpio_input(AT91_PIN_PC4, 1); /* Touchscreen PENIRQ */ - at91_set_gpio_input(AT91_PIN_PC5, 1); /* Touchscreen BUSY */ -} -#else -static void __init cap9adk_add_device_ts(void) {} -#endif - - -/* - * SPI devices. - */ -static struct spi_board_info cap9adk_spi_devices[] = { -#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD) - { /* DataFlash card */ - .modalias = "mtd_dataflash", - .chip_select = 0, - .max_speed_hz = 15 * 1000 * 1000, - .bus_num = 0, - }, -#endif -#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) - { - .modalias = "ads7846", - .chip_select = 3, /* can be 2 or 3, depending on J2 jumper */ - .max_speed_hz = 125000 * 26, /* (max sample rate @ 3V) * (cmd + data + overhead) */ - .bus_num = 0, - .platform_data = &ads_info, - .irq = AT91_PIN_PC4, - }, -#endif -}; - - -/* - * MCI (SD/MMC) - */ -static struct at91_mmc_data __initdata cap9adk_mmc_data = { - .wire4 = 1, - .det_pin = -EINVAL, - .wp_pin = -EINVAL, - .vcc_pin = -EINVAL, -}; - - -/* - * MACB Ethernet device - */ -static struct macb_platform_data __initdata cap9adk_macb_data = { - .phy_irq_pin = -EINVAL, - .is_rmii = 1, -}; - - -/* - * NAND flash - */ -static struct mtd_partition __initdata cap9adk_nand_partitions[] = { - { - .name = "NAND partition", - .offset = 0, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct atmel_nand_data __initdata cap9adk_nand_data = { - .ale = 21, - .cle = 22, - .det_pin = -EINVAL, - .rdy_pin = -EINVAL, - .enable_pin = AT91_PIN_PD15, - .parts = cap9adk_nand_partitions, - .num_parts = ARRAY_SIZE(cap9adk_nand_partitions), -}; - -static struct sam9_smc_config __initdata cap9adk_nand_smc_config = { - .ncs_read_setup = 1, - .nrd_setup = 2, - .ncs_write_setup = 1, - .nwe_setup = 2, - - .ncs_read_pulse = 6, - .nrd_pulse = 4, - .ncs_write_pulse = 6, - .nwe_pulse = 4, - - .read_cycle = 8, - .write_cycle = 8, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE, - .tdf_cycles = 1, -}; - -static void __init cap9adk_add_device_nand(void) -{ - unsigned long csa; - - csa = at91_sys_read(AT91_MATRIX_EBICSA); - at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V); - - cap9adk_nand_data.bus_width_16 = board_have_nand_16bit(); - /* setup bus-width (8 or 16) */ - if (cap9adk_nand_data.bus_width_16) - cap9adk_nand_smc_config.mode |= AT91_SMC_DBW_16; - else - cap9adk_nand_smc_config.mode |= AT91_SMC_DBW_8; - - /* configure chip-select 3 (NAND) */ - sam9_smc_configure(0, 3, &cap9adk_nand_smc_config); - - at91_add_device_nand(&cap9adk_nand_data); -} - - -/* - * NOR flash - */ -static struct mtd_partition cap9adk_nor_partitions[] = { - { - .name = "NOR partition", - .offset = 0, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct physmap_flash_data cap9adk_nor_data = { - .width = 2, - .parts = cap9adk_nor_partitions, - .nr_parts = ARRAY_SIZE(cap9adk_nor_partitions), -}; - -#define NOR_BASE AT91_CHIPSELECT_0 -#define NOR_SIZE SZ_8M - -static struct resource nor_flash_resources[] = { - { - .start = NOR_BASE, - .end = NOR_BASE + NOR_SIZE - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device cap9adk_nor_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &cap9adk_nor_data, - }, - .resource = nor_flash_resources, - .num_resources = ARRAY_SIZE(nor_flash_resources), -}; - -static struct sam9_smc_config __initdata cap9adk_nor_smc_config = { - .ncs_read_setup = 2, - .nrd_setup = 4, - .ncs_write_setup = 2, - .nwe_setup = 4, - - .ncs_read_pulse = 10, - .nrd_pulse = 8, - .ncs_write_pulse = 10, - .nwe_pulse = 8, - - .read_cycle = 16, - .write_cycle = 16, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE | AT91_SMC_DBW_16, - .tdf_cycles = 1, -}; - -static __init void cap9adk_add_device_nor(void) -{ - unsigned long csa; - - csa = at91_sys_read(AT91_MATRIX_EBICSA); - at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V); - - /* configure chip-select 0 (NOR) */ - sam9_smc_configure(0, 0, &cap9adk_nor_smc_config); - - platform_device_register(&cap9adk_nor_flash); -} - - -/* - * LCD Controller - */ -#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE) -static struct fb_videomode at91_tft_vga_modes[] = { - { - .name = "TX09D50VM1CCA @ 60", - .refresh = 60, - .xres = 240, .yres = 320, - .pixclock = KHZ2PICOS(4965), - - .left_margin = 1, .right_margin = 33, - .upper_margin = 1, .lower_margin = 0, - .hsync_len = 5, .vsync_len = 1, - - .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, - .vmode = FB_VMODE_NONINTERLACED, - }, -}; - -static struct fb_monspecs at91fb_default_monspecs = { - .manufacturer = "HIT", - .monitor = "TX09D70VM1CCA", - - .modedb = at91_tft_vga_modes, - .modedb_len = ARRAY_SIZE(at91_tft_vga_modes), - .hfmin = 15000, - .hfmax = 64000, - .vfmin = 50, - .vfmax = 150, -}; - -#define AT91CAP9_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \ - | ATMEL_LCDC_DISTYPE_TFT \ - | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE) - -static void at91_lcdc_power_control(int on) -{ - if (on) - at91_set_gpio_value(AT91_PIN_PC0, 0); /* power up */ - else - at91_set_gpio_value(AT91_PIN_PC0, 1); /* power down */ -} - -/* Driver datas */ -static struct atmel_lcdfb_info __initdata cap9adk_lcdc_data = { - .default_bpp = 16, - .default_dmacon = ATMEL_LCDC_DMAEN, - .default_lcdcon2 = AT91CAP9_DEFAULT_LCDCON2, - .default_monspecs = &at91fb_default_monspecs, - .atmel_lcdfb_power_control = at91_lcdc_power_control, - .guard_time = 1, -}; - -#else -static struct atmel_lcdfb_info __initdata cap9adk_lcdc_data; -#endif - - -/* - * AC97 - */ -static struct ac97c_platform_data cap9adk_ac97_data = { - .reset_pin = -EINVAL, -}; - - -static void __init cap9adk_board_init(void) -{ - /* Serial */ - at91_add_device_serial(); - /* USB Host */ - at91_add_device_usbh(&cap9adk_usbh_data); - /* USB HS */ - at91_add_device_usba(&cap9adk_usba_udc_data); - /* SPI */ - at91_add_device_spi(cap9adk_spi_devices, ARRAY_SIZE(cap9adk_spi_devices)); - /* Touchscreen */ - cap9adk_add_device_ts(); - /* MMC */ - at91_add_device_mmc(1, &cap9adk_mmc_data); - /* Ethernet */ - at91_add_device_eth(&cap9adk_macb_data); - /* NAND */ - cap9adk_add_device_nand(); - /* NOR Flash */ - cap9adk_add_device_nor(); - /* I2C */ - at91_add_device_i2c(NULL, 0); - /* LCD Controller */ - at91_add_device_lcdc(&cap9adk_lcdc_data); - /* AC97 */ - at91_add_device_ac97(&cap9adk_ac97_data); -} - -MACHINE_START(AT91CAP9ADK, "Atmel AT91CAP9A-DK") - /* Maintainer: Stelian Pop <stelian.pop@leadtechdesign.com> */ - .timer = &at91sam926x_timer, - .map_io = at91_map_io, - .init_early = cap9adk_init_early, - .init_irq = at91_init_irq_default, - .init_machine = cap9adk_board_init, -MACHINE_END diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c index eec02cd57ce..1815152001f 100644 --- a/arch/arm/mach-at91/board-flexibity.c +++ b/arch/arm/mach-at91/board-flexibity.c @@ -1,7 +1,7 @@ /* * linux/arch/arm/mach-at91/board-flexibity.c * - * Copyright (C) 2010 Flexibity + * Copyright (C) 2010-2011 Flexibity * Copyright (C) 2005 SAN People * Copyright (C) 2006 Atmel * @@ -62,6 +62,13 @@ static struct at91_udc_data __initdata flexibity_udc_data = { .pullup_pin = -EINVAL, /* pull-up driven by UDC */ }; +/* I2C devices */ +static struct i2c_board_info __initdata flexibity_i2c_devices[] = { + { + I2C_BOARD_INFO("ds1307", 0x68), + }, +}; + /* SPI devices */ static struct spi_board_info flexibity_spi_devices[] = { { /* DataFlash chip */ @@ -141,6 +148,9 @@ static void __init flexibity_board_init(void) at91_add_device_usbh(&flexibity_usbh_data); /* USB Device */ at91_add_device_udc(&flexibity_udc_data); + /* I2C */ + at91_add_device_i2c(flexibity_i2c_devices, + ARRAY_SIZE(flexibity_i2c_devices)); /* SPI */ at91_add_device_spi(flexibity_spi_devices, ARRAY_SIZE(flexibity_spi_devices)); diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c index ea0d1b9c2b7..57497e2b887 100644 --- a/arch/arm/mach-at91/board-sam9m10g45ek.c +++ b/arch/arm/mach-at91/board-sam9m10g45ek.c @@ -24,11 +24,13 @@ #include <linux/gpio_keys.h> #include <linux/input.h> #include <linux/leds.h> -#include <linux/clk.h> #include <linux/atmel-mci.h> +#include <linux/delay.h> #include <mach/hardware.h> #include <video/atmel_lcdc.h> +#include <media/soc_camera.h> +#include <media/atmel-isi.h> #include <asm/setup.h> #include <asm/mach-types.h> @@ -185,6 +187,71 @@ static void __init ek_add_device_nand(void) /* + * ISI + */ +static struct isi_platform_data __initdata isi_data = { + .frate = ISI_CFG1_FRATE_CAPTURE_ALL, + /* to use codec and preview path simultaneously */ + .full_mode = 1, + .data_width_flags = ISI_DATAWIDTH_8 | ISI_DATAWIDTH_10, + /* ISI_MCK is provided by programmable clock or external clock */ + .mck_hz = 25000000, +}; + + +/* + * soc-camera OV2640 + */ +#if defined(CONFIG_SOC_CAMERA_OV2640) || \ + defined(CONFIG_SOC_CAMERA_OV2640_MODULE) +static unsigned long isi_camera_query_bus_param(struct soc_camera_link *link) +{ + /* ISI board for ek using default 8-bits connection */ + return SOCAM_DATAWIDTH_8; +} + +static int i2c_camera_power(struct device *dev, int on) +{ + /* enable or disable the camera */ + pr_debug("%s: %s the camera\n", __func__, on ? "ENABLE" : "DISABLE"); + at91_set_gpio_output(AT91_PIN_PD13, !on); + + if (!on) + goto out; + + /* If enabled, give a reset impulse */ + at91_set_gpio_output(AT91_PIN_PD12, 0); + msleep(20); + at91_set_gpio_output(AT91_PIN_PD12, 1); + msleep(100); + +out: + return 0; +} + +static struct i2c_board_info i2c_camera = { + I2C_BOARD_INFO("ov2640", 0x30), +}; + +static struct soc_camera_link iclink_ov2640 = { + .bus_id = 0, + .board_info = &i2c_camera, + .i2c_adapter_id = 0, + .power = i2c_camera_power, + .query_bus_param = isi_camera_query_bus_param, +}; + +static struct platform_device isi_ov2640 = { + .name = "soc-camera-pdrv", + .id = 0, + .dev = { + .platform_data = &iclink_ov2640, + }, +}; +#endif + + +/* * LCD Controller */ #if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE) @@ -377,7 +444,12 @@ static struct gpio_led ek_pwm_led[] = { #endif }; - +static struct platform_device *devices[] __initdata = { +#if defined(CONFIG_SOC_CAMERA_OV2640) || \ + defined(CONFIG_SOC_CAMERA_OV2640_MODULE) + &isi_ov2640, +#endif +}; static void __init ek_board_init(void) { @@ -399,6 +471,8 @@ static void __init ek_board_init(void) ek_add_device_nand(); /* I2C */ at91_add_device_i2c(0, NULL, 0); + /* ISI, using programmable clock as ISI_MCK */ + at91_add_device_isi(&isi_data, true); /* LCD Controller */ at91_add_device_lcdc(&ek_lcdc_data); /* Touch Screen */ @@ -410,6 +484,8 @@ static void __init ek_board_init(void) /* LEDs */ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); at91_pwm_leds(ek_pwm_led, ARRAY_SIZE(ek_pwm_led)); + /* Other platform devices */ + platform_add_devices(devices, ARRAY_SIZE(devices)); } MACHINE_START(AT91SAM9M10G45EK, "Atmel AT91SAM9M10G45-EK") diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c index 61873f3aa92..aa04e22a9da 100644 --- a/arch/arm/mach-at91/clock.c +++ b/arch/arm/mach-at91/clock.c @@ -47,8 +47,7 @@ /* * Chips have some kind of clocks : group them by functionality */ -#define cpu_has_utmi() ( cpu_is_at91cap9() \ - || cpu_is_at91sam9rl() \ +#define cpu_has_utmi() ( cpu_is_at91sam9rl() \ || cpu_is_at91sam9g45()) #define cpu_has_800M_plla() ( cpu_is_at91sam9g20() \ @@ -602,8 +601,6 @@ static void __init at91_pllb_usbfs_clock_init(unsigned long main_clock) cpu_is_at91sam9g10()) { uhpck.pmc_mask = AT91SAM926x_PMC_UHP; udpck.pmc_mask = AT91SAM926x_PMC_UDP; - } else if (cpu_is_at91cap9()) { - uhpck.pmc_mask = AT91CAP9_PMC_UHP; } at91_sys_write(AT91_CKGR_PLLBR, 0); diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index 594133451c0..7e8280e798c 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -45,7 +45,6 @@ extern void __init at91sam9261_set_console_clock(int id); extern void __init at91sam9263_set_console_clock(int id); extern void __init at91sam9rl_set_console_clock(int id); extern void __init at91sam9g45_set_console_clock(int id); -extern void __init at91cap9_set_console_clock(int id); #ifdef CONFIG_AT91_PMC_UNIT extern int __init at91_clock_init(unsigned long main_clock); #else diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h index e46f93e34aa..dbdd6ae473d 100644 --- a/arch/arm/mach-at91/include/mach/at91_pmc.h +++ b/arch/arm/mach-at91/include/mach/at91_pmc.h @@ -23,10 +23,8 @@ #define AT91_PMC_PCK (1 << 0) /* Processor Clock */ #define AT91RM9200_PMC_UDP (1 << 1) /* USB Devcice Port Clock [AT91RM9200 only] */ #define AT91RM9200_PMC_MCKUDP (1 << 2) /* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */ -#define AT91CAP9_PMC_DDR (1 << 2) /* DDR Clock [CAP9 revC & some SAM9 only] */ #define AT91RM9200_PMC_UHP (1 << 4) /* USB Host Port Clock [AT91RM9200 only] */ #define AT91SAM926x_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91SAM926x only] */ -#define AT91CAP9_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91CAP9 only] */ #define AT91SAM926x_PMC_UDP (1 << 7) /* USB Devcice Port Clock [AT91SAM926x only] */ #define AT91_PMC_PCK0 (1 << 8) /* Programmable Clock 0 */ #define AT91_PMC_PCK1 (1 << 9) /* Programmable Clock 1 */ @@ -40,7 +38,7 @@ #define AT91_PMC_PCDR (AT91_PMC + 0x14) /* Peripheral Clock Disable Register */ #define AT91_PMC_PCSR (AT91_PMC + 0x18) /* Peripheral Clock Status Register */ -#define AT91_CKGR_UCKR (AT91_PMC + 0x1C) /* UTMI Clock Register [some SAM9, CAP9] */ +#define AT91_CKGR_UCKR (AT91_PMC + 0x1C) /* UTMI Clock Register [some SAM9] */ #define AT91_PMC_UPLLEN (1 << 16) /* UTMI PLL Enable */ #define AT91_PMC_UPLLCOUNT (0xf << 20) /* UTMI PLL Start-up Time */ #define AT91_PMC_BIASEN (1 << 24) /* UTMI BIAS Enable */ @@ -48,7 +46,7 @@ #define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register [not on SAM9RL] */ #define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */ -#define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass [SAM9x, CAP9] */ +#define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass [SAM9x] */ #define AT91_PMC_OSCOUNT (0xff << 8) /* Main Oscillator Start-up Time */ #define AT91_CKGR_MCFR (AT91_PMC + 0x24) /* Main Clock Frequency Register */ @@ -87,7 +85,7 @@ #define AT91RM9200_PMC_MDIV_2 (1 << 8) #define AT91RM9200_PMC_MDIV_3 (2 << 8) #define AT91RM9200_PMC_MDIV_4 (3 << 8) -#define AT91SAM9_PMC_MDIV_1 (0 << 8) /* [SAM9,CAP9 only] */ +#define AT91SAM9_PMC_MDIV_1 (0 << 8) /* [SAM9 only] */ #define AT91SAM9_PMC_MDIV_2 (1 << 8) #define AT91SAM9_PMC_MDIV_4 (2 << 8) #define AT91SAM9_PMC_MDIV_6 (3 << 8) /* [some SAM9 only] */ @@ -117,17 +115,15 @@ #define AT91_PMC_LOCKA (1 << 1) /* PLLA Lock */ #define AT91_PMC_LOCKB (1 << 2) /* PLLB Lock */ #define AT91_PMC_MCKRDY (1 << 3) /* Master Clock */ -#define AT91_PMC_LOCKU (1 << 6) /* UPLL Lock [some SAM9, AT91CAP9 only] */ -#define AT91_PMC_OSCSEL (1 << 7) /* Slow Clock Oscillator [AT91CAP9 revC only] */ +#define AT91_PMC_LOCKU (1 << 6) /* UPLL Lock [some SAM9] */ #define AT91_PMC_PCK0RDY (1 << 8) /* Programmable Clock 0 */ #define AT91_PMC_PCK1RDY (1 << 9) /* Programmable Clock 1 */ #define AT91_PMC_PCK2RDY (1 << 10) /* Programmable Clock 2 */ #define AT91_PMC_PCK3RDY (1 << 11) /* Programmable Clock 3 */ #define AT91_PMC_IMR (AT91_PMC + 0x6c) /* Interrupt Mask Register */ -#define AT91_PMC_PROT (AT91_PMC + 0xe4) /* Protect Register [AT91CAP9 revC only] */ +#define AT91_PMC_PROT (AT91_PMC + 0xe4) /* Write Protect Mode Register [some SAM9] */ #define AT91_PMC_PROTKEY 0x504d4301 /* Activation Code */ -#define AT91_PMC_VER (AT91_PMC + 0xfc) /* PMC Module Version [AT91CAP9 only] */ #endif diff --git a/arch/arm/mach-at91/include/mach/at91cap9.h b/arch/arm/mach-at91/include/mach/at91cap9.h deleted file mode 100644 index 61d952902f2..00000000000 --- a/arch/arm/mach-at91/include/mach/at91cap9.h +++ /dev/null @@ -1,122 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91cap9.h - * - * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com> - * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com> - * Copyright (C) 2007 Atmel Corporation. - * - * Common definitions. - * Based on AT91CAP9 datasheet revision B (Preliminary). - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91CAP9_H -#define AT91CAP9_H - -/* - * Peripheral identifiers/interrupts. - */ -#define AT91CAP9_ID_PIOABCD 2 /* Parallel IO Controller A, B, C and D */ -#define AT91CAP9_ID_MPB0 3 /* MP Block Peripheral 0 */ -#define AT91CAP9_ID_MPB1 4 /* MP Block Peripheral 1 */ -#define AT91CAP9_ID_MPB2 5 /* MP Block Peripheral 2 */ -#define AT91CAP9_ID_MPB3 6 /* MP Block Peripheral 3 */ -#define AT91CAP9_ID_MPB4 7 /* MP Block Peripheral 4 */ -#define AT91CAP9_ID_US0 8 /* USART 0 */ -#define AT91CAP9_ID_US1 9 /* USART 1 */ -#define AT91CAP9_ID_US2 10 /* USART 2 */ -#define AT91CAP9_ID_MCI0 11 /* Multimedia Card Interface 0 */ -#define AT91CAP9_ID_MCI1 12 /* Multimedia Card Interface 1 */ -#define AT91CAP9_ID_CAN 13 /* CAN */ -#define AT91CAP9_ID_TWI 14 /* Two-Wire Interface */ -#define AT91CAP9_ID_SPI0 15 /* Serial Peripheral Interface 0 */ -#define AT91CAP9_ID_SPI1 16 /* Serial Peripheral Interface 0 */ -#define AT91CAP9_ID_SSC0 17 /* Serial Synchronous Controller 0 */ -#define AT91CAP9_ID_SSC1 18 /* Serial Synchronous Controller 1 */ -#define AT91CAP9_ID_AC97C 19 /* AC97 Controller */ -#define AT91CAP9_ID_TCB 20 /* Timer Counter 0, 1 and 2 */ -#define AT91CAP9_ID_PWMC 21 /* Pulse Width Modulation Controller */ -#define AT91CAP9_ID_EMAC 22 /* Ethernet */ -#define AT91CAP9_ID_AESTDES 23 /* Advanced Encryption Standard, Triple DES */ -#define AT91CAP9_ID_ADC 24 /* Analog-to-Digital Converter */ -#define AT91CAP9_ID_ISI 25 /* Image Sensor Interface */ -#define AT91CAP9_ID_LCDC 26 /* LCD Controller */ -#define AT91CAP9_ID_DMA 27 /* DMA Controller */ -#define AT91CAP9_ID_UDPHS 28 /* USB High Speed Device Port */ -#define AT91CAP9_ID_UHP 29 /* USB Host Port */ -#define AT91CAP9_ID_IRQ0 30 /* Advanced Interrupt Controller (IRQ0) */ -#define AT91CAP9_ID_IRQ1 31 /* Advanced Interrupt Controller (IRQ1) */ - -/* - * User Peripheral physical base addresses. - */ -#define AT91CAP9_BASE_UDPHS 0xfff78000 -#define AT91CAP9_BASE_TCB0 0xfff7c000 -#define AT91CAP9_BASE_TC0 0xfff7c000 -#define AT91CAP9_BASE_TC1 0xfff7c040 -#define AT91CAP9_BASE_TC2 0xfff7c080 -#define AT91CAP9_BASE_MCI0 0xfff80000 -#define AT91CAP9_BASE_MCI1 0xfff84000 -#define AT91CAP9_BASE_TWI 0xfff88000 -#define AT91CAP9_BASE_US0 0xfff8c000 -#define AT91CAP9_BASE_US1 0xfff90000 -#define AT91CAP9_BASE_US2 0xfff94000 -#define AT91CAP9_BASE_SSC0 0xfff98000 -#define AT91CAP9_BASE_SSC1 0xfff9c000 -#define AT91CAP9_BASE_AC97C 0xfffa0000 -#define AT91CAP9_BASE_SPI0 0xfffa4000 -#define AT91CAP9_BASE_SPI1 0xfffa8000 -#define AT91CAP9_BASE_CAN 0xfffac000 -#define AT91CAP9_BASE_PWMC 0xfffb8000 -#define AT91CAP9_BASE_EMAC 0xfffbc000 -#define AT91CAP9_BASE_ADC 0xfffc0000 -#define AT91CAP9_BASE_ISI 0xfffc4000 - -/* - * System Peripherals (offset from AT91_BASE_SYS) - */ -#define AT91_BCRAMC (0xffffe400 - AT91_BASE_SYS) -#define AT91_DDRSDRC0 (0xffffe600 - AT91_BASE_SYS) -#define AT91_MATRIX (0xffffea00 - AT91_BASE_SYS) -#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) -#define AT91_GPBR (cpu_is_at91cap9_revB() ? \ - (0xfffffd50 - AT91_BASE_SYS) : \ - (0xfffffd60 - AT91_BASE_SYS)) - -#define AT91CAP9_BASE_ECC 0xffffe200 -#define AT91CAP9_BASE_DMA 0xffffec00 -#define AT91CAP9_BASE_SMC 0xffffe800 -#define AT91CAP9_BASE_DBGU AT91_BASE_DBGU1 -#define AT91CAP9_BASE_PIOA 0xfffff200 -#define AT91CAP9_BASE_PIOB 0xfffff400 -#define AT91CAP9_BASE_PIOC 0xfffff600 -#define AT91CAP9_BASE_PIOD 0xfffff800 -#define AT91CAP9_BASE_RSTC 0xfffffd00 -#define AT91CAP9_BASE_SHDWC 0xfffffd10 -#define AT91CAP9_BASE_RTT 0xfffffd20 -#define AT91CAP9_BASE_PIT 0xfffffd30 -#define AT91CAP9_BASE_WDT 0xfffffd40 - -#define AT91_USART0 AT91CAP9_BASE_US0 -#define AT91_USART1 AT91CAP9_BASE_US1 -#define AT91_USART2 AT91CAP9_BASE_US2 - - -/* - * Internal Memory. - */ -#define AT91CAP9_SRAM_BASE 0x00100000 /* Internal SRAM base address */ -#define AT91CAP9_SRAM_SIZE (32 * SZ_1K) /* Internal SRAM size (32Kb) */ - -#define AT91CAP9_ROM_BASE 0x00400000 /* Internal ROM base address */ -#define AT91CAP9_ROM_SIZE (32 * SZ_1K) /* Internal ROM size (32Kb) */ - -#define AT91CAP9_LCDC_BASE 0x00500000 /* LCD Controller */ -#define AT91CAP9_UDPHS_FIFO 0x00600000 /* USB High Speed Device Port */ -#define AT91CAP9_UHP_BASE 0x00700000 /* USB Host controller */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91cap9_matrix.h b/arch/arm/mach-at91/include/mach/at91cap9_matrix.h deleted file mode 100644 index 4b9d4aff4b4..00000000000 --- a/arch/arm/mach-at91/include/mach/at91cap9_matrix.h +++ /dev/null @@ -1,137 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91cap9_matrix.h - * - * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com> - * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com> - * Copyright (C) 2006 Atmel Corporation. - * - * Memory Controllers (MATRIX, EBI) - System peripherals registers. - * Based on AT91CAP9 datasheet revision B (Preliminary). - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91CAP9_MATRIX_H -#define AT91CAP9_MATRIX_H - -#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */ -#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */ -#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */ -#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */ -#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */ -#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */ -#define AT91_MATRIX_MCFG6 (AT91_MATRIX + 0x18) /* Master Configuration Register 6 */ -#define AT91_MATRIX_MCFG7 (AT91_MATRIX + 0x1C) /* Master Configuration Register 7 */ -#define AT91_MATRIX_MCFG8 (AT91_MATRIX + 0x20) /* Master Configuration Register 8 */ -#define AT91_MATRIX_MCFG9 (AT91_MATRIX + 0x24) /* Master Configuration Register 9 */ -#define AT91_MATRIX_MCFG10 (AT91_MATRIX + 0x28) /* Master Configuration Register 10 */ -#define AT91_MATRIX_MCFG11 (AT91_MATRIX + 0x2C) /* Master Configuration Register 11 */ -#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */ -#define AT91_MATRIX_ULBT_INFINITE (0 << 0) -#define AT91_MATRIX_ULBT_SINGLE (1 << 0) -#define AT91_MATRIX_ULBT_FOUR (2 << 0) -#define AT91_MATRIX_ULBT_EIGHT (3 << 0) -#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) - -#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */ -#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */ -#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */ -#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */ -#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */ -#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */ -#define AT91_MATRIX_SCFG6 (AT91_MATRIX + 0x58) /* Slave Configuration Register 6 */ -#define AT91_MATRIX_SCFG7 (AT91_MATRIX + 0x5C) /* Slave Configuration Register 7 */ -#define AT91_MATRIX_SCFG8 (AT91_MATRIX + 0x60) /* Slave Configuration Register 8 */ -#define AT91_MATRIX_SCFG9 (AT91_MATRIX + 0x64) /* Slave Configuration Register 9 */ -#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */ -#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ -#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) -#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */ -#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */ -#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24) -#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24) - -#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */ -#define AT91_MATRIX_PRBS0 (AT91_MATRIX + 0x84) /* Priority Register B for Slave 0 */ -#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */ -#define AT91_MATRIX_PRBS1 (AT91_MATRIX + 0x8C) /* Priority Register B for Slave 1 */ -#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */ -#define AT91_MATRIX_PRBS2 (AT91_MATRIX + 0x94) /* Priority Register B for Slave 2 */ -#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */ -#define AT91_MATRIX_PRBS3 (AT91_MATRIX + 0x9C) /* Priority Register B for Slave 3 */ -#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */ -#define AT91_MATRIX_PRBS4 (AT91_MATRIX + 0xA4) /* Priority Register B for Slave 4 */ -#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */ -#define AT91_MATRIX_PRBS5 (AT91_MATRIX + 0xAC) /* Priority Register B for Slave 5 */ -#define AT91_MATRIX_PRAS6 (AT91_MATRIX + 0xB0) /* Priority Register A for Slave 6 */ -#define AT91_MATRIX_PRBS6 (AT91_MATRIX + 0xB4) /* Priority Register B for Slave 6 */ -#define AT91_MATRIX_PRAS7 (AT91_MATRIX + 0xB8) /* Priority Register A for Slave 7 */ -#define AT91_MATRIX_PRBS7 (AT91_MATRIX + 0xBC) /* Priority Register B for Slave 7 */ -#define AT91_MATRIX_PRAS8 (AT91_MATRIX + 0xC0) /* Priority Register A for Slave 8 */ -#define AT91_MATRIX_PRBS8 (AT91_MATRIX + 0xC4) /* Priority Register B for Slave 8 */ -#define AT91_MATRIX_PRAS9 (AT91_MATRIX + 0xC8) /* Priority Register A for Slave 9 */ -#define AT91_MATRIX_PRBS9 (AT91_MATRIX + 0xCC) /* Priority Register B for Slave 9 */ -#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */ -#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */ -#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */ -#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */ -#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */ -#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */ -#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */ -#define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */ -#define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */ -#define AT91_MATRIX_M9PR (3 << 4) /* Master 9 Priority (in Register B) */ -#define AT91_MATRIX_M10PR (3 << 8) /* Master 10 Priority (in Register B) */ -#define AT91_MATRIX_M11PR (3 << 12) /* Master 11 Priority (in Register B) */ - -#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */ -#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ -#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ -#define AT91_MATRIX_RCB2 (1 << 2) -#define AT91_MATRIX_RCB3 (1 << 3) -#define AT91_MATRIX_RCB4 (1 << 4) -#define AT91_MATRIX_RCB5 (1 << 5) -#define AT91_MATRIX_RCB6 (1 << 6) -#define AT91_MATRIX_RCB7 (1 << 7) -#define AT91_MATRIX_RCB8 (1 << 8) -#define AT91_MATRIX_RCB9 (1 << 9) -#define AT91_MATRIX_RCB10 (1 << 10) -#define AT91_MATRIX_RCB11 (1 << 11) - -#define AT91_MPBS0_SFR (AT91_MATRIX + 0x114) /* MPBlock Slave 0 Special Function Register */ -#define AT91_MPBS1_SFR (AT91_MATRIX + 0x11C) /* MPBlock Slave 1 Special Function Register */ - -#define AT91_MATRIX_UDPHS (AT91_MATRIX + 0x118) /* USBHS Special Function Register [AT91CAP9 only] */ -#define AT91_MATRIX_SELECT_UDPHS (0 << 31) /* select High Speed UDP */ -#define AT91_MATRIX_SELECT_UDP (1 << 31) /* select standard UDP */ -#define AT91_MATRIX_UDPHS_BYPASS_LOCK (1 << 30) /* bypass lock bit */ - -#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x120) /* EBI Chip Select Assignment Register */ -#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */ -#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1) -#define AT91_MATRIX_EBI_CS1A_BCRAMC (1 << 1) -#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3 Assignment */ -#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3) -#define AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA (1 << 3) -#define AT91_MATRIX_EBI_CS4A (1 << 4) /* Chip Select 4 Assignment */ -#define AT91_MATRIX_EBI_CS4A_SMC (0 << 4) -#define AT91_MATRIX_EBI_CS4A_SMC_CF1 (1 << 4) -#define AT91_MATRIX_EBI_CS5A (1 << 5) /* Chip Select 5 Assignment */ -#define AT91_MATRIX_EBI_CS5A_SMC (0 << 5) -#define AT91_MATRIX_EBI_CS5A_SMC_CF2 (1 << 5) -#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ -#define AT91_MATRIX_EBI_DQSPDC (1 << 9) /* Data Qualifier Strobe Pull-Down Configuration */ -#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16) /* Memory voltage selection */ -#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16) -#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16) - -#define AT91_MPBS2_SFR (AT91_MATRIX + 0x12C) /* MPBlock Slave 2 Special Function Register */ -#define AT91_MPBS3_SFR (AT91_MATRIX + 0x130) /* MPBlock Slave 3 Special Function Register */ -#define AT91_APB_SFR (AT91_MATRIX + 0x134) /* APB Bridge Special Function Register */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h b/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h index e2f8da8ce5b..5d4a9f84658 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h +++ b/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h @@ -59,7 +59,6 @@ #define AT91_DDRSDRC_TRP (0xf << 16) /* Row precharge delay */ #define AT91_DDRSDRC_TRRD (0xf << 20) /* Active BankA to BankB */ #define AT91_DDRSDRC_TWTR (0x7 << 24) /* Internal Write to Read delay */ -#define AT91CAP9_DDRSDRC_TWTR (1 << 24) /* Internal Write to Read delay */ #define AT91_DDRSDRC_RED_WRRD (0x1 << 27) /* Reduce Write to Read Delay [SAM9 Only] */ #define AT91_DDRSDRC_TMRD (0xf << 28) /* Load mode to active/refresh delay */ @@ -76,7 +75,6 @@ #define AT91_DDRSDRC_TRTP (0x7 << 12) /* Read to Precharge delay */ #define AT91_DDRSDRC_LPR 0x1C /* Low Power Register */ -#define AT91CAP9_DDRSDRC_LPR 0x18 /* Low Power Register */ #define AT91_DDRSDRC_LPCB (3 << 0) /* Low-power Configurations */ #define AT91_DDRSDRC_LPCB_DISABLE 0 #define AT91_DDRSDRC_LPCB_SELF_REFRESH 1 @@ -94,11 +92,9 @@ #define AT91_DDRSDRC_UPD_MR (3 << 20) /* Update load mode register and extended mode register */ #define AT91_DDRSDRC_MDR 0x20 /* Memory Device Register */ -#define AT91CAP9_DDRSDRC_MDR 0x1C /* Memory Device Register */ #define AT91_DDRSDRC_MD (3 << 0) /* Memory Device Type */ #define AT91_DDRSDRC_MD_SDR 0 #define AT91_DDRSDRC_MD_LOW_POWER_SDR 1 -#define AT91CAP9_DDRSDRC_MD_DDR 2 #define AT91_DDRSDRC_MD_LOW_POWER_DDR 3 #define AT91_DDRSDRC_MD_DDR2 6 /* [SAM9 Only] */ #define AT91_DDRSDRC_DBW (1 << 4) /* Data Bus Width */ @@ -106,16 +102,10 @@ #define AT91_DDRSDRC_DBW_16BITS (1 << 4) #define AT91_DDRSDRC_DLL 0x24 /* DLL Information Register */ -#define AT91CAP9_DDRSDRC_DLL 0x20 /* DLL Information Register */ #define AT91_DDRSDRC_MDINC (1 << 0) /* Master Delay increment */ #define AT91_DDRSDRC_MDDEC (1 << 1) /* Master Delay decrement */ #define AT91_DDRSDRC_MDOVF (1 << 2) /* Master Delay Overflow */ -#define AT91CAP9_DDRSDRC_SDCOVF (1 << 3) /* Slave Delay Correction Overflow */ -#define AT91CAP9_DDRSDRC_SDCUDF (1 << 4) /* Slave Delay Correction Underflow */ -#define AT91CAP9_DDRSDRC_SDERF (1 << 5) /* Slave Delay Correction error */ #define AT91_DDRSDRC_MDVAL (0xff << 8) /* Master Delay value */ -#define AT91CAP9_DDRSDRC_SDVAL (0xff << 16) /* Slave Delay value */ -#define AT91CAP9_DDRSDRC_SDCVAL (0xff << 24) /* Slave Delay Correction value */ #define AT91_DDRSDRC_HS 0x2C /* High Speed Register [SAM9 Only] */ #define AT91_DDRSDRC_DIS_ATCP_RD (1 << 2) /* Anticip read access is disabled */ diff --git a/arch/arm/mach-at91/include/mach/at91sam9_smc.h b/arch/arm/mach-at91/include/mach/at91sam9_smc.h index eb18a70fa64..175e1fdd9fe 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9_smc.h +++ b/arch/arm/mach-at91/include/mach/at91sam9_smc.h @@ -18,6 +18,35 @@ #include <mach/cpu.h> +#ifndef __ASSEMBLY__ +struct sam9_smc_config { + /* Setup register */ + u8 ncs_read_setup; + u8 nrd_setup; + u8 ncs_write_setup; + u8 nwe_setup; + + /* Pulse register */ + u8 ncs_read_pulse; + u8 nrd_pulse; + u8 ncs_write_pulse; + u8 nwe_pulse; + + /* Cycle register */ + u16 read_cycle; + u16 write_cycle; + + /* Mode register */ + u32 mode; + u8 tdf_cycles:4; +}; + +extern void sam9_smc_configure(int id, int cs, struct sam9_smc_config *config); +extern void sam9_smc_read(int id, int cs, struct sam9_smc_config *config); +extern void sam9_smc_read_mode(int id, int cs, struct sam9_smc_config *config); +extern void sam9_smc_write_mode(int id, int cs, struct sam9_smc_config *config); +#endif + #define AT91_SMC_SETUP 0x00 /* Setup Register for CS n */ #define AT91_SMC_NWESETUP (0x3f << 0) /* NWE Setup Length */ #define AT91_SMC_NWESETUP_(x) ((x) << 0) diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h index 3b33f07b1e1..dc8d6d4f17c 100644 --- a/arch/arm/mach-at91/include/mach/board.h +++ b/arch/arm/mach-at91/include/mach/board.h @@ -107,6 +107,8 @@ struct atmel_nand_data { u8 ale; /* address line number connected to ALE */ u8 cle; /* address line number connected to CLE */ u8 bus_width_16; /* buswidth is 16 bit */ + u8 correction_cap; /* PMECC correction capability */ + u16 sector_size; /* Sector size for PMECC */ struct mtd_partition *parts; unsigned int num_parts; }; @@ -179,7 +181,9 @@ extern void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data); extern void __init at91_add_device_ac97(struct ac97c_platform_data *data); /* ISI */ -extern void __init at91_add_device_isi(void); +struct isi_platform_data; +extern void __init at91_add_device_isi(struct isi_platform_data *data, + bool use_pck_as_mck); /* Touchscreen Controller */ struct at91_tsadcc_data { diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h index f6ce936dba2..0118c333855 100644 --- a/arch/arm/mach-at91/include/mach/cpu.h +++ b/arch/arm/mach-at91/include/mach/cpu.h @@ -25,7 +25,6 @@ #define ARCH_ID_AT91SAM9G45MRL 0x819b05a2 /* aka 9G45-ES2 & non ES lots */ #define ARCH_ID_AT91SAM9G45ES 0x819b05a1 /* 9G45-ES (Engineering Sample) */ #define ARCH_ID_AT91SAM9X5 0x819a05a0 -#define ARCH_ID_AT91CAP9 0x039A03A0 #define ARCH_ID_AT91SAM9XE128 0x329973a0 #define ARCH_ID_AT91SAM9XE256 0x329a93a0 @@ -51,10 +50,6 @@ #define ARCH_FAMILY_AT91SAM9 0x01900000 #define ARCH_FAMILY_AT91SAM9XE 0x02900000 -/* PMC revision */ -#define ARCH_REVISION_CAP9_B 0x399 -#define ARCH_REVISION_CAP9_C 0x601 - /* RM9200 type */ #define ARCH_REVISON_9200_BGA (0 << 0) #define ARCH_REVISON_9200_PQFP (1 << 0) @@ -63,9 +58,6 @@ enum at91_soc_type { /* 920T */ AT91_SOC_RM9200, - /* CAP */ - AT91_SOC_CAP9, - /* SAM92xx */ AT91_SOC_SAM9260, AT91_SOC_SAM9261, AT91_SOC_SAM9263, @@ -86,9 +78,6 @@ enum at91_soc_subtype { /* RM9200 */ AT91_SOC_RM9200_BGA, AT91_SOC_RM9200_PQFP, - /* CAP9 */ - AT91_SOC_CAP9_REV_B, AT91_SOC_CAP9_REV_C, - /* SAM9260 */ AT91_SOC_SAM9XE, @@ -195,16 +184,6 @@ static inline int at91_soc_is_detected(void) #define cpu_is_at91sam9x25() (0) #endif -#ifdef CONFIG_ARCH_AT91CAP9 -#define cpu_is_at91cap9() (at91_soc_initdata.type == AT91_SOC_CAP9) -#define cpu_is_at91cap9_revB() (at91_soc_initdata.subtype == AT91_SOC_CAP9_REV_B) -#define cpu_is_at91cap9_revC() (at91_soc_initdata.subtype == AT91_SOC_CAP9_REV_C) -#else -#define cpu_is_at91cap9() (0) -#define cpu_is_at91cap9_revB() (0) -#define cpu_is_at91cap9_revC() (0) -#endif - /* * Since this is ARM, we will never run on any AVR32 CPU. But these * definitions may reduce clutter in common drivers. diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h index 2d0e4e99856..c213f28628c 100644 --- a/arch/arm/mach-at91/include/mach/hardware.h +++ b/arch/arm/mach-at91/include/mach/hardware.h @@ -19,7 +19,7 @@ /* DBGU base */ /* rm9200, 9260/9g20, 9261/9g10, 9rl */ #define AT91_BASE_DBGU0 0xfffff200 -/* 9263, 9g45, cap9 */ +/* 9263, 9g45 */ #define AT91_BASE_DBGU1 0xffffee00 #if defined(CONFIG_ARCH_AT91RM9200) @@ -34,8 +34,6 @@ #include <mach/at91sam9rl.h> #elif defined(CONFIG_ARCH_AT91SAM9G45) #include <mach/at91sam9g45.h> -#elif defined(CONFIG_ARCH_AT91CAP9) -#include <mach/at91cap9.h> #elif defined(CONFIG_ARCH_AT91X40) #include <mach/at91x40.h> #else diff --git a/arch/arm/mach-at91/include/mach/system.h b/arch/arm/mach-at91/include/mach/system.h deleted file mode 100644 index cbd64f3bcec..00000000000 --- a/arch/arm/mach-at91/include/mach/system.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/system.h - * - * Copyright (C) 2003 SAN People - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -#include <mach/hardware.h> -#include <mach/at91_st.h> -#include <mach/at91_dbgu.h> -#include <mach/at91_pmc.h> - -static inline void arch_idle(void) -{ - /* - * Disable the processor clock. The processor will be automatically - * re-enabled by an interrupt or by a reset. - */ -#ifdef AT91_PS - at91_sys_write(AT91_PS_CR, AT91_PS_CR_CPU); -#else - at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK); -#endif -#ifndef CONFIG_CPU_ARM920T - /* - * Set the processor (CP15) into 'Wait for Interrupt' mode. - * Post-RM9200 processors need this in conjunction with the above - * to save power when idle. - */ - cpu_do_idle(); -#endif -} - -#endif diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 1606379ac28..87be5aa1875 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -150,11 +150,6 @@ static int at91_pm_verify_clocks(void) pr_err("AT91: PM - Suspend-to-RAM with USB still active\n"); return 0; } - } else if (cpu_is_at91cap9()) { - if ((scsr & AT91CAP9_PMC_UHP) != 0) { - pr_err("AT91: PM - Suspend-to-RAM with USB still active\n"); - return 0; - } } #ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h index 7eb40d24242..218d816427c 100644 --- a/arch/arm/mach-at91/pm.h +++ b/arch/arm/mach-at91/pm.h @@ -24,24 +24,6 @@ static inline u32 sdram_selfrefresh_enable(void) #define wait_for_interrupt_enable() asm volatile ("mcr p15, 0, %0, c7, c0, 4" \ : : "r" (0)) -#elif defined(CONFIG_ARCH_AT91CAP9) -#include <mach/at91sam9_ddrsdr.h> - - -static inline u32 sdram_selfrefresh_enable(void) -{ - u32 saved_lpr, lpr; - - saved_lpr = at91_ramc_read(0, AT91CAP9_DDRSDRC_LPR); - - lpr = saved_lpr & ~AT91_DDRSDRC_LPCB; - at91_ramc_write(0, AT91CAP9_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH); - return saved_lpr; -} - -#define sdram_selfrefresh_disable(saved_lpr) at91_ramc_write(0, AT91CAP9_DDRSDRC_LPR, saved_lpr) -#define wait_for_interrupt_enable() cpu_do_idle() - #elif defined(CONFIG_ARCH_AT91SAM9G45) #include <mach/at91sam9_ddrsdr.h> diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S index 92dfb846139..f8539a8bcd6 100644 --- a/arch/arm/mach-at91/pm_slowclock.S +++ b/arch/arm/mach-at91/pm_slowclock.S @@ -18,8 +18,7 @@ #if defined(CONFIG_ARCH_AT91RM9200) #include <mach/at91rm9200_mc.h> -#elif defined(CONFIG_ARCH_AT91CAP9) \ - || defined(CONFIG_ARCH_AT91SAM9G45) +#elif defined(CONFIG_ARCH_AT91SAM9G45) #include <mach/at91sam9_ddrsdr.h> #else #include <mach/at91sam9_sdramc.h> @@ -130,8 +129,7 @@ ENTRY(at91_slow_clock) /* Put SDRAM in self-refresh mode */ mov r3, #1 str r3, [r2, #AT91_SDRAMC_SRR] -#elif defined(CONFIG_ARCH_AT91CAP9) \ - || defined(CONFIG_ARCH_AT91SAM9G45) +#elif defined(CONFIG_ARCH_AT91SAM9G45) /* prepare for DDRAM self-refresh mode */ ldr r3, [r2, #AT91_DDRSDRC_LPR] @@ -263,8 +261,7 @@ ENTRY(at91_slow_clock) #ifdef CONFIG_ARCH_AT91RM9200 /* Do nothing - self-refresh is automatically disabled. */ -#elif defined(CONFIG_ARCH_AT91CAP9) \ - || defined(CONFIG_ARCH_AT91SAM9G45) +#elif defined(CONFIG_ARCH_AT91SAM9G45) /* Restore LPR on AT91 with DDRAM */ ldr r3, .saved_sam9_lpr str r3, [r2, #AT91_DDRSDRC_LPR] @@ -305,8 +302,7 @@ ENTRY(at91_slow_clock) #ifdef CONFIG_ARCH_AT91RM9200 .at91_va_base_sdramc: .word AT91_VA_BASE_SYS -#elif defined(CONFIG_ARCH_AT91CAP9) \ - || defined(CONFIG_ARCH_AT91SAM9G45) +#elif defined(CONFIG_ARCH_AT91SAM9G45) .at91_va_base_sdramc: .word AT91_VA_BASE_SYS + AT91_DDRSDRC0 #else diff --git a/arch/arm/mach-at91/sam9_smc.c b/arch/arm/mach-at91/sam9_smc.c index 8294783b679..99a0a1d2b7d 100644 --- a/arch/arm/mach-at91/sam9_smc.c +++ b/arch/arm/mach-at91/sam9_smc.c @@ -2,6 +2,7 @@ * linux/arch/arm/mach-at91/sam9_smc.c * * Copyright (C) 2008 Andrew Victor + * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -22,7 +23,22 @@ static void __iomem *smc_base_addr[2]; -static void __init sam9_smc_cs_configure(void __iomem *base, struct sam9_smc_config* config) +static void sam9_smc_cs_write_mode(void __iomem *base, + struct sam9_smc_config *config) +{ + __raw_writel(config->mode + | AT91_SMC_TDF_(config->tdf_cycles), + base + AT91_SMC_MODE); +} + +void sam9_smc_write_mode(int id, int cs, + struct sam9_smc_config *config) +{ + sam9_smc_cs_write_mode(AT91_SMC_CS(id, cs), config); +} + +static void sam9_smc_cs_configure(void __iomem *base, + struct sam9_smc_config *config) { /* Setup register */ @@ -45,16 +61,66 @@ static void __init sam9_smc_cs_configure(void __iomem *base, struct sam9_smc_con base + AT91_SMC_CYCLE); /* Mode register */ - __raw_writel(config->mode - | AT91_SMC_TDF_(config->tdf_cycles), - base + AT91_SMC_MODE); + sam9_smc_cs_write_mode(base, config); } -void __init sam9_smc_configure(int id, int cs, struct sam9_smc_config* config) +void sam9_smc_configure(int id, int cs, + struct sam9_smc_config *config) { sam9_smc_cs_configure(AT91_SMC_CS(id, cs), config); } +static void sam9_smc_cs_read_mode(void __iomem *base, + struct sam9_smc_config *config) +{ + u32 val = __raw_readl(base + AT91_SMC_MODE); + + config->mode = (val & ~AT91_SMC_NWECYCLE); + config->tdf_cycles = (val & AT91_SMC_NWECYCLE) >> 16 ; +} + +void sam9_smc_read_mode(int id, int cs, + struct sam9_smc_config *config) +{ + sam9_smc_cs_read_mode(AT91_SMC_CS(id, cs), config); +} + +static void sam9_smc_cs_read(void __iomem *base, + struct sam9_smc_config *config) +{ + u32 val; + + /* Setup register */ + val = __raw_readl(base + AT91_SMC_SETUP); + + config->nwe_setup = val & AT91_SMC_NWESETUP; + config->ncs_write_setup = (val & AT91_SMC_NCS_WRSETUP) >> 8; + config->nrd_setup = (val & AT91_SMC_NRDSETUP) >> 16; + config->ncs_read_setup = (val & AT91_SMC_NCS_RDSETUP) >> 24; + + /* Pulse register */ + val = __raw_readl(base + AT91_SMC_PULSE); + + config->nwe_setup = val & AT91_SMC_NWEPULSE; + config->ncs_write_pulse = (val & AT91_SMC_NCS_WRPULSE) >> 8; + config->nrd_pulse = (val & AT91_SMC_NRDPULSE) >> 16; + config->ncs_read_pulse = (val & AT91_SMC_NCS_RDPULSE) >> 24; + + /* Cycle register */ + val = __raw_readl(base + AT91_SMC_CYCLE); + + config->write_cycle = val & AT91_SMC_NWECYCLE; + config->read_cycle = (val & AT91_SMC_NRDCYCLE) >> 16; + + /* Mode register */ + sam9_smc_cs_read_mode(base, config); +} + +void sam9_smc_read(int id, int cs, struct sam9_smc_config *config) +{ + sam9_smc_cs_read(AT91_SMC_CS(id, cs), config); +} + void __init at91sam9_ioremap_smc(int id, u32 addr) { if (id > 1) { diff --git a/arch/arm/mach-at91/sam9_smc.h b/arch/arm/mach-at91/sam9_smc.h index 039c5ce17ae..3e52dcd4a59 100644 --- a/arch/arm/mach-at91/sam9_smc.h +++ b/arch/arm/mach-at91/sam9_smc.h @@ -8,27 +8,4 @@ * published by the Free Software Foundation. */ -struct sam9_smc_config { - /* Setup register */ - u8 ncs_read_setup; - u8 nrd_setup; - u8 ncs_write_setup; - u8 nwe_setup; - - /* Pulse register */ - u8 ncs_read_pulse; - u8 nrd_pulse; - u8 ncs_write_pulse; - u8 nwe_pulse; - - /* Cycle register */ - u16 read_cycle; - u16 write_cycle; - - /* Mode register */ - u32 mode; - u8 tdf_cycles:4; -}; - -extern void __init sam9_smc_configure(int id, int cs, struct sam9_smc_config* config); extern void __init at91sam9_ioremap_smc(int id, u32 addr); diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c index 69d3fc4c46f..620c67e8f81 100644 --- a/arch/arm/mach-at91/setup.c +++ b/arch/arm/mach-at91/setup.c @@ -86,20 +86,6 @@ static void __init soc_detect(u32 dbgu_base) socid = cidr & ~AT91_CIDR_VERSION; switch (socid) { - case ARCH_ID_AT91CAP9: { -#ifdef CONFIG_AT91_PMC_UNIT - u32 pmc_ver = at91_sys_read(AT91_PMC_VER); - - if (pmc_ver == ARCH_REVISION_CAP9_B) - at91_soc_initdata.subtype = AT91_SOC_CAP9_REV_B; - else if (pmc_ver == ARCH_REVISION_CAP9_C) - at91_soc_initdata.subtype = AT91_SOC_CAP9_REV_C; -#endif - at91_soc_initdata.type = AT91_SOC_CAP9; - at91_boot_soc = at91cap9_soc; - break; - } - case ARCH_ID_AT91RM9200: at91_soc_initdata.type = AT91_SOC_RM9200; at91_boot_soc = at91rm9200_soc; @@ -200,7 +186,6 @@ static void __init soc_detect(u32 dbgu_base) static const char *soc_name[] = { [AT91_SOC_RM9200] = "at91rm9200", - [AT91_SOC_CAP9] = "at91cap9", [AT91_SOC_SAM9260] = "at91sam9260", [AT91_SOC_SAM9261] = "at91sam9261", [AT91_SOC_SAM9263] = "at91sam9263", @@ -221,8 +206,6 @@ EXPORT_SYMBOL(at91_get_soc_type); static const char *soc_subtype_name[] = { [AT91_SOC_RM9200_BGA] = "at91rm9200 BGA", [AT91_SOC_RM9200_PQFP] = "at91rm9200 PQFP", - [AT91_SOC_CAP9_REV_B] = "at91cap9 revB", - [AT91_SOC_CAP9_REV_C] = "at91cap9 revC", [AT91_SOC_SAM9XE] = "at91sam9xe", [AT91_SOC_SAM9G45ES] = "at91sam9g45es", [AT91_SOC_SAM9M10] = "at91sam9m10", diff --git a/arch/arm/mach-at91/soc.h b/arch/arm/mach-at91/soc.h index 4588ae6f7ac..5db4aa45404 100644 --- a/arch/arm/mach-at91/soc.h +++ b/arch/arm/mach-at91/soc.h @@ -13,7 +13,6 @@ struct at91_init_soc { }; extern struct at91_init_soc at91_boot_soc; -extern struct at91_init_soc at91cap9_soc; extern struct at91_init_soc at91rm9200_soc; extern struct at91_init_soc at91sam9260_soc; extern struct at91_init_soc at91sam9261_soc; @@ -27,10 +26,6 @@ static inline int at91_soc_is_enabled(void) return at91_boot_soc.init != NULL; } -#if !defined(CONFIG_ARCH_AT91CAP9) -#define at91cap9_soc at91_boot_soc -#endif - #if !defined(CONFIG_ARCH_AT91RM9200) #define at91rm9200_soc at91_boot_soc #endif diff --git a/arch/arm/mach-bcmring/arch.c b/arch/arm/mach-bcmring/arch.c index 9e5e7552498..45c97b1ee9b 100644 --- a/arch/arm/mach-bcmring/arch.c +++ b/arch/arm/mach-bcmring/arch.c @@ -194,6 +194,6 @@ MACHINE_START(BCMRING, "BCMRING") .init_early = bcmring_init_early, .init_irq = bcmring_init_irq, .timer = &bcmring_timer, - .init_machine = bcmring_init_machine + .init_machine = bcmring_init_machine, .restart = bcmring_restart, MACHINE_END diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c index 6b67b7e8426..22e4e0a28ad 100644 --- a/arch/arm/mach-bcmring/core.c +++ b/arch/arm/mach-bcmring/core.c @@ -52,27 +52,8 @@ #include <mach/csp/chipcHw_inline.h> #include <mach/csp/tmrHw_reg.h> -#define AMBA_DEVICE(name, initname, base, plat, size) \ -static struct amba_device name##_device = { \ - .dev = { \ - .coherent_dma_mask = ~0, \ - .init_name = initname, \ - .platform_data = plat \ - }, \ - .res = { \ - .start = MM_ADDR_IO_##base, \ - .end = MM_ADDR_IO_##base + (size) - 1, \ - .flags = IORESOURCE_MEM \ - }, \ - .dma_mask = ~0, \ - .irq = { \ - IRQ_##base \ - } \ -} - - -AMBA_DEVICE(uartA, "uarta", UARTA, NULL, SZ_4K); -AMBA_DEVICE(uartB, "uartb", UARTB, NULL, SZ_4K); +static AMBA_APB_DEVICE(uartA, "uarta", MM_ADDR_IO_UARTA, { IRQ_UARTA }, NULL); +static AMBA_APB_DEVICE(uartB, "uartb", MM_ADDR_IO_UARTB, { IRQ_UARTB }, NULL); static struct clk pll1_clk = { .name = "PLL1", diff --git a/arch/arm/mach-bcmring/dma.c b/arch/arm/mach-bcmring/dma.c index 1a1a27dd565..1024396797e 100644 --- a/arch/arm/mach-bcmring/dma.c +++ b/arch/arm/mach-bcmring/dma.c @@ -33,17 +33,11 @@ #include <mach/timer.h> -#include <linux/mm.h> #include <linux/pfn.h> #include <linux/atomic.h> #include <linux/sched.h> #include <mach/dma.h> -/* I don't quite understand why dc4 fails when this is set to 1 and DMA is enabled */ -/* especially since dc4 doesn't use kmalloc'd memory. */ - -#define ALLOW_MAP_OF_KMALLOC_MEMORY 0 - /* ---- Public Variables ------------------------------------------------- */ /* ---- Private Constants and Types -------------------------------------- */ @@ -53,24 +47,12 @@ #define CONTROLLER_FROM_HANDLE(handle) (((handle) >> 4) & 0x0f) #define CHANNEL_FROM_HANDLE(handle) ((handle) & 0x0f) -#define DMA_MAP_DEBUG 0 - -#if DMA_MAP_DEBUG -# define DMA_MAP_PRINT(fmt, args...) printk("%s: " fmt, __func__, ## args) -#else -# define DMA_MAP_PRINT(fmt, args...) -#endif /* ---- Private Variables ------------------------------------------------ */ static DMA_Global_t gDMA; static struct proc_dir_entry *gDmaDir; -static atomic_t gDmaStatMemTypeKmalloc = ATOMIC_INIT(0); -static atomic_t gDmaStatMemTypeVmalloc = ATOMIC_INIT(0); -static atomic_t gDmaStatMemTypeUser = ATOMIC_INIT(0); -static atomic_t gDmaStatMemTypeCoherent = ATOMIC_INIT(0); - #include "dma_device.c" /* ---- Private Function Prototypes -------------------------------------- */ @@ -79,34 +61,6 @@ static atomic_t gDmaStatMemTypeCoherent = ATOMIC_INIT(0); /****************************************************************************/ /** -* Displays information for /proc/dma/mem-type -*/ -/****************************************************************************/ - -static int dma_proc_read_mem_type(char *buf, char **start, off_t offset, - int count, int *eof, void *data) -{ - int len = 0; - - len += sprintf(buf + len, "dma_map_mem statistics\n"); - len += - sprintf(buf + len, "coherent: %d\n", - atomic_read(&gDmaStatMemTypeCoherent)); - len += - sprintf(buf + len, "kmalloc: %d\n", - atomic_read(&gDmaStatMemTypeKmalloc)); - len += - sprintf(buf + len, "vmalloc: %d\n", - atomic_read(&gDmaStatMemTypeVmalloc)); - len += - sprintf(buf + len, "user: %d\n", - atomic_read(&gDmaStatMemTypeUser)); - - return len; -} - -/****************************************************************************/ -/** * Displays information for /proc/dma/channels */ /****************************************************************************/ @@ -846,8 +800,6 @@ int dma_init(void) dma_proc_read_channels, NULL); create_proc_read_entry("devices", 0, gDmaDir, dma_proc_read_devices, NULL); - create_proc_read_entry("mem-type", 0, gDmaDir, - dma_proc_read_mem_type, NULL); } out: @@ -1565,767 +1517,3 @@ int dma_set_device_handler(DMA_Device_t dev, /* Device to set the callback for. } EXPORT_SYMBOL(dma_set_device_handler); - -/****************************************************************************/ -/** -* Initializes a memory mapping structure -*/ -/****************************************************************************/ - -int dma_init_mem_map(DMA_MemMap_t *memMap) -{ - memset(memMap, 0, sizeof(*memMap)); - - sema_init(&memMap->lock, 1); - - return 0; -} - -EXPORT_SYMBOL(dma_init_mem_map); - -/****************************************************************************/ -/** -* Releases any memory currently being held by a memory mapping structure. -*/ -/****************************************************************************/ - -int dma_term_mem_map(DMA_MemMap_t *memMap) -{ - down(&memMap->lock); /* Just being paranoid */ - - /* Free up any allocated memory */ - - up(&memMap->lock); - memset(memMap, 0, sizeof(*memMap)); - - return 0; -} - -EXPORT_SYMBOL(dma_term_mem_map); - -/****************************************************************************/ -/** -* Looks at a memory address and categorizes it. -* -* @return One of the values from the DMA_MemType_t enumeration. -*/ -/****************************************************************************/ - -DMA_MemType_t dma_mem_type(void *addr) -{ - unsigned long addrVal = (unsigned long)addr; - - if (addrVal >= CONSISTENT_BASE) { - /* NOTE: DMA virtual memory space starts at 0xFFxxxxxx */ - - /* dma_alloc_xxx pages are physically and virtually contiguous */ - - return DMA_MEM_TYPE_DMA; - } - - /* Technically, we could add one more classification. Addresses between VMALLOC_END */ - /* and the beginning of the DMA virtual address could be considered to be I/O space. */ - /* Right now, nobody cares about this particular classification, so we ignore it. */ - - if (is_vmalloc_addr(addr)) { - /* Address comes from the vmalloc'd region. Pages are virtually */ - /* contiguous but NOT physically contiguous */ - - return DMA_MEM_TYPE_VMALLOC; - } - - if (addrVal >= PAGE_OFFSET) { - /* PAGE_OFFSET is typically 0xC0000000 */ - - /* kmalloc'd pages are physically contiguous */ - - return DMA_MEM_TYPE_KMALLOC; - } - - return DMA_MEM_TYPE_USER; -} - -EXPORT_SYMBOL(dma_mem_type); - -/****************************************************************************/ -/** -* Looks at a memory address and determines if we support DMA'ing to/from -* that type of memory. -* -* @return boolean - -* return value != 0 means dma supported -* return value == 0 means dma not supported -*/ -/****************************************************************************/ - -int dma_mem_supports_dma(void *addr) -{ - DMA_MemType_t memType = dma_mem_type(addr); - - return (memType == DMA_MEM_TYPE_DMA) -#if ALLOW_MAP_OF_KMALLOC_MEMORY - || (memType == DMA_MEM_TYPE_KMALLOC) -#endif - || (memType == DMA_MEM_TYPE_USER); -} - -EXPORT_SYMBOL(dma_mem_supports_dma); - -/****************************************************************************/ -/** -* Maps in a memory region such that it can be used for performing a DMA. -* -* @return -*/ -/****************************************************************************/ - -int dma_map_start(DMA_MemMap_t *memMap, /* Stores state information about the map */ - enum dma_data_direction dir /* Direction that the mapping will be going */ - ) { - int rc; - - down(&memMap->lock); - - DMA_MAP_PRINT("memMap: %p\n", memMap); - - if (memMap->inUse) { - printk(KERN_ERR "%s: memory map %p is already being used\n", - __func__, memMap); - rc = -EBUSY; - goto out; - } - - memMap->inUse = 1; - memMap->dir = dir; - memMap->numRegionsUsed = 0; - - rc = 0; - -out: - - DMA_MAP_PRINT("returning %d", rc); - - up(&memMap->lock); - - return rc; -} - -EXPORT_SYMBOL(dma_map_start); - -/****************************************************************************/ -/** -* Adds a segment of memory to a memory map. Each segment is both -* physically and virtually contiguous. -* -* @return 0 on success, error code otherwise. -*/ -/****************************************************************************/ - -static int dma_map_add_segment(DMA_MemMap_t *memMap, /* Stores state information about the map */ - DMA_Region_t *region, /* Region that the segment belongs to */ - void *virtAddr, /* Virtual address of the segment being added */ - dma_addr_t physAddr, /* Physical address of the segment being added */ - size_t numBytes /* Number of bytes of the segment being added */ - ) { - DMA_Segment_t *segment; - - DMA_MAP_PRINT("memMap:%p va:%p pa:0x%x #:%d\n", memMap, virtAddr, - physAddr, numBytes); - - /* Sanity check */ - - if (((unsigned long)virtAddr < (unsigned long)region->virtAddr) - || (((unsigned long)virtAddr + numBytes)) > - ((unsigned long)region->virtAddr + region->numBytes)) { - printk(KERN_ERR - "%s: virtAddr %p is outside region @ %p len: %d\n", - __func__, virtAddr, region->virtAddr, region->numBytes); - return -EINVAL; - } - - if (region->numSegmentsUsed > 0) { - /* Check to see if this segment is physically contiguous with the previous one */ - - segment = ®ion->segment[region->numSegmentsUsed - 1]; - - if ((segment->physAddr + segment->numBytes) == physAddr) { - /* It is - just add on to the end */ - - DMA_MAP_PRINT("appending %d bytes to last segment\n", - numBytes); - - segment->numBytes += numBytes; - - return 0; - } - } - - /* Reallocate to hold more segments, if required. */ - - if (region->numSegmentsUsed >= region->numSegmentsAllocated) { - DMA_Segment_t *newSegment; - size_t oldSize = - region->numSegmentsAllocated * sizeof(*newSegment); - int newAlloc = region->numSegmentsAllocated + 4; - size_t newSize = newAlloc * sizeof(*newSegment); - - newSegment = kmalloc(newSize, GFP_KERNEL); - if (newSegment == NULL) { - return -ENOMEM; - } - memcpy(newSegment, region->segment, oldSize); - memset(&((uint8_t *) newSegment)[oldSize], 0, - newSize - oldSize); - kfree(region->segment); - - region->numSegmentsAllocated = newAlloc; - region->segment = newSegment; - } - - segment = ®ion->segment[region->numSegmentsUsed]; - region->numSegmentsUsed++; - - segment->virtAddr = virtAddr; - segment->physAddr = physAddr; - segment->numBytes = numBytes; - - DMA_MAP_PRINT("returning success\n"); - - return 0; -} - -/****************************************************************************/ -/** -* Adds a region of memory to a memory map. Each region is virtually -* contiguous, but not necessarily physically contiguous. -* -* @return 0 on success, error code otherwise. -*/ -/****************************************************************************/ - -int dma_map_add_region(DMA_MemMap_t *memMap, /* Stores state information about the map */ - void *mem, /* Virtual address that we want to get a map of */ - size_t numBytes /* Number of bytes being mapped */ - ) { - unsigned long addr = (unsigned long)mem; - unsigned int offset; - int rc = 0; - DMA_Region_t *region; - dma_addr_t physAddr; - - down(&memMap->lock); - - DMA_MAP_PRINT("memMap:%p va:%p #:%d\n", memMap, mem, numBytes); - - if (!memMap->inUse) { - printk(KERN_ERR "%s: Make sure you call dma_map_start first\n", - __func__); - rc = -EINVAL; - goto out; - } - - /* Reallocate to hold more regions. */ - - if (memMap->numRegionsUsed >= memMap->numRegionsAllocated) { - DMA_Region_t *newRegion; - size_t oldSize = - memMap->numRegionsAllocated * sizeof(*newRegion); - int newAlloc = memMap->numRegionsAllocated + 4; - size_t newSize = newAlloc * sizeof(*newRegion); - - newRegion = kmalloc(newSize, GFP_KERNEL); - if (newRegion == NULL) { - rc = -ENOMEM; - goto out; - } - memcpy(newRegion, memMap->region, oldSize); - memset(&((uint8_t *) newRegion)[oldSize], 0, newSize - oldSize); - - kfree(memMap->region); - - memMap->numRegionsAllocated = newAlloc; - memMap->region = newRegion; - } - - region = &memMap->region[memMap->numRegionsUsed]; - memMap->numRegionsUsed++; - - offset = addr & ~PAGE_MASK; - - region->memType = dma_mem_type(mem); - region->virtAddr = mem; - region->numBytes = numBytes; - region->numSegmentsUsed = 0; - region->numLockedPages = 0; - region->lockedPages = NULL; - - switch (region->memType) { - case DMA_MEM_TYPE_VMALLOC: - { - atomic_inc(&gDmaStatMemTypeVmalloc); - - /* printk(KERN_ERR "%s: vmalloc'd pages are not supported\n", __func__); */ - - /* vmalloc'd pages are not physically contiguous */ - - rc = -EINVAL; - break; - } - - case DMA_MEM_TYPE_KMALLOC: - { - atomic_inc(&gDmaStatMemTypeKmalloc); - - /* kmalloc'd pages are physically contiguous, so they'll have exactly */ - /* one segment */ - -#if ALLOW_MAP_OF_KMALLOC_MEMORY - physAddr = - dma_map_single(NULL, mem, numBytes, memMap->dir); - rc = dma_map_add_segment(memMap, region, mem, physAddr, - numBytes); -#else - rc = -EINVAL; -#endif - break; - } - - case DMA_MEM_TYPE_DMA: - { - /* dma_alloc_xxx pages are physically contiguous */ - - atomic_inc(&gDmaStatMemTypeCoherent); - - physAddr = (vmalloc_to_pfn(mem) << PAGE_SHIFT) + offset; - - dma_sync_single_for_cpu(NULL, physAddr, numBytes, - memMap->dir); - rc = dma_map_add_segment(memMap, region, mem, physAddr, - numBytes); - break; - } - - case DMA_MEM_TYPE_USER: - { - size_t firstPageOffset; - size_t firstPageSize; - struct page **pages; - struct task_struct *userTask; - - atomic_inc(&gDmaStatMemTypeUser); - -#if 1 - /* If the pages are user pages, then the dma_mem_map_set_user_task function */ - /* must have been previously called. */ - - if (memMap->userTask == NULL) { - printk(KERN_ERR - "%s: must call dma_mem_map_set_user_task when using user-mode memory\n", - __func__); - return -EINVAL; - } - - /* User pages need to be locked. */ - - firstPageOffset = - (unsigned long)region->virtAddr & (PAGE_SIZE - 1); - firstPageSize = PAGE_SIZE - firstPageOffset; - - region->numLockedPages = (firstPageOffset - + region->numBytes + - PAGE_SIZE - 1) / PAGE_SIZE; - pages = - kmalloc(region->numLockedPages * - sizeof(struct page *), GFP_KERNEL); - - if (pages == NULL) { - region->numLockedPages = 0; - return -ENOMEM; - } - - userTask = memMap->userTask; - - down_read(&userTask->mm->mmap_sem); - rc = get_user_pages(userTask, /* task */ - userTask->mm, /* mm */ - (unsigned long)region->virtAddr, /* start */ - region->numLockedPages, /* len */ - memMap->dir == DMA_FROM_DEVICE, /* write */ - 0, /* force */ - pages, /* pages (array of pointers to page) */ - NULL); /* vmas */ - up_read(&userTask->mm->mmap_sem); - - if (rc != region->numLockedPages) { - kfree(pages); - region->numLockedPages = 0; - - if (rc >= 0) { - rc = -EINVAL; - } - } else { - uint8_t *virtAddr = region->virtAddr; - size_t bytesRemaining; - int pageIdx; - - rc = 0; /* Since get_user_pages returns +ve number */ - - region->lockedPages = pages; - - /* We've locked the user pages. Now we need to walk them and figure */ - /* out the physical addresses. */ - - /* The first page may be partial */ - - dma_map_add_segment(memMap, - region, - virtAddr, - PFN_PHYS(page_to_pfn - (pages[0])) + - firstPageOffset, - firstPageSize); - - virtAddr += firstPageSize; - bytesRemaining = - region->numBytes - firstPageSize; - - for (pageIdx = 1; - pageIdx < region->numLockedPages; - pageIdx++) { - size_t bytesThisPage = - (bytesRemaining > - PAGE_SIZE ? PAGE_SIZE : - bytesRemaining); - - DMA_MAP_PRINT - ("pageIdx:%d pages[pageIdx]=%p pfn=%u phys=%u\n", - pageIdx, pages[pageIdx], - page_to_pfn(pages[pageIdx]), - PFN_PHYS(page_to_pfn - (pages[pageIdx]))); - - dma_map_add_segment(memMap, - region, - virtAddr, - PFN_PHYS(page_to_pfn - (pages - [pageIdx])), - bytesThisPage); - - virtAddr += bytesThisPage; - bytesRemaining -= bytesThisPage; - } - } -#else - printk(KERN_ERR - "%s: User mode pages are not yet supported\n", - __func__); - - /* user pages are not physically contiguous */ - - rc = -EINVAL; -#endif - break; - } - - default: - { - printk(KERN_ERR "%s: Unsupported memory type: %d\n", - __func__, region->memType); - - rc = -EINVAL; - break; - } - } - - if (rc != 0) { - memMap->numRegionsUsed--; - } - -out: - - DMA_MAP_PRINT("returning %d\n", rc); - - up(&memMap->lock); - - return rc; -} - -EXPORT_SYMBOL(dma_map_add_segment); - -/****************************************************************************/ -/** -* Maps in a memory region such that it can be used for performing a DMA. -* -* @return 0 on success, error code otherwise. -*/ -/****************************************************************************/ - -int dma_map_mem(DMA_MemMap_t *memMap, /* Stores state information about the map */ - void *mem, /* Virtual address that we want to get a map of */ - size_t numBytes, /* Number of bytes being mapped */ - enum dma_data_direction dir /* Direction that the mapping will be going */ - ) { - int rc; - - rc = dma_map_start(memMap, dir); - if (rc == 0) { - rc = dma_map_add_region(memMap, mem, numBytes); - if (rc < 0) { - /* Since the add fails, this function will fail, and the caller won't */ - /* call unmap, so we need to do it here. */ - - dma_unmap(memMap, 0); - } - } - - return rc; -} - -EXPORT_SYMBOL(dma_map_mem); - -/****************************************************************************/ -/** -* Setup a descriptor ring for a given memory map. -* -* It is assumed that the descriptor ring has already been initialized, and -* this routine will only reallocate a new descriptor ring if the existing -* one is too small. -* -* @return 0 on success, error code otherwise. -*/ -/****************************************************************************/ - -int dma_map_create_descriptor_ring(DMA_Device_t dev, /* DMA device (where the ring is stored) */ - DMA_MemMap_t *memMap, /* Memory map that will be used */ - dma_addr_t devPhysAddr /* Physical address of device */ - ) { - int rc; - int numDescriptors; - DMA_DeviceAttribute_t *devAttr; - DMA_Region_t *region; - DMA_Segment_t *segment; - dma_addr_t srcPhysAddr; - dma_addr_t dstPhysAddr; - int regionIdx; - int segmentIdx; - - devAttr = &DMA_gDeviceAttribute[dev]; - - down(&memMap->lock); - - /* Figure out how many descriptors we need */ - - numDescriptors = 0; - for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) { - region = &memMap->region[regionIdx]; - - for (segmentIdx = 0; segmentIdx < region->numSegmentsUsed; - segmentIdx++) { - segment = ®ion->segment[segmentIdx]; - - if (memMap->dir == DMA_TO_DEVICE) { - srcPhysAddr = segment->physAddr; - dstPhysAddr = devPhysAddr; - } else { - srcPhysAddr = devPhysAddr; - dstPhysAddr = segment->physAddr; - } - - rc = - dma_calculate_descriptor_count(dev, srcPhysAddr, - dstPhysAddr, - segment-> - numBytes); - if (rc < 0) { - printk(KERN_ERR - "%s: dma_calculate_descriptor_count failed: %d\n", - __func__, rc); - goto out; - } - numDescriptors += rc; - } - } - - /* Adjust the size of the ring, if it isn't big enough */ - - if (numDescriptors > devAttr->ring.descriptorsAllocated) { - dma_free_descriptor_ring(&devAttr->ring); - rc = - dma_alloc_descriptor_ring(&devAttr->ring, - numDescriptors); - if (rc < 0) { - printk(KERN_ERR - "%s: dma_alloc_descriptor_ring failed: %d\n", - __func__, rc); - goto out; - } - } else { - rc = - dma_init_descriptor_ring(&devAttr->ring, - numDescriptors); - if (rc < 0) { - printk(KERN_ERR - "%s: dma_init_descriptor_ring failed: %d\n", - __func__, rc); - goto out; - } - } - - /* Populate the descriptors */ - - for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) { - region = &memMap->region[regionIdx]; - - for (segmentIdx = 0; segmentIdx < region->numSegmentsUsed; - segmentIdx++) { - segment = ®ion->segment[segmentIdx]; - - if (memMap->dir == DMA_TO_DEVICE) { - srcPhysAddr = segment->physAddr; - dstPhysAddr = devPhysAddr; - } else { - srcPhysAddr = devPhysAddr; - dstPhysAddr = segment->physAddr; - } - - rc = - dma_add_descriptors(&devAttr->ring, dev, - srcPhysAddr, dstPhysAddr, - segment->numBytes); - if (rc < 0) { - printk(KERN_ERR - "%s: dma_add_descriptors failed: %d\n", - __func__, rc); - goto out; - } - } - } - - rc = 0; - -out: - - up(&memMap->lock); - return rc; -} - -EXPORT_SYMBOL(dma_map_create_descriptor_ring); - -/****************************************************************************/ -/** -* Maps in a memory region such that it can be used for performing a DMA. -* -* @return -*/ -/****************************************************************************/ - -int dma_unmap(DMA_MemMap_t *memMap, /* Stores state information about the map */ - int dirtied /* non-zero if any of the pages were modified */ - ) { - - int rc = 0; - int regionIdx; - int segmentIdx; - DMA_Region_t *region; - DMA_Segment_t *segment; - - down(&memMap->lock); - - for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) { - region = &memMap->region[regionIdx]; - - for (segmentIdx = 0; segmentIdx < region->numSegmentsUsed; - segmentIdx++) { - segment = ®ion->segment[segmentIdx]; - - switch (region->memType) { - case DMA_MEM_TYPE_VMALLOC: - { - printk(KERN_ERR - "%s: vmalloc'd pages are not yet supported\n", - __func__); - rc = -EINVAL; - goto out; - } - - case DMA_MEM_TYPE_KMALLOC: - { -#if ALLOW_MAP_OF_KMALLOC_MEMORY - dma_unmap_single(NULL, - segment->physAddr, - segment->numBytes, - memMap->dir); -#endif - break; - } - - case DMA_MEM_TYPE_DMA: - { - dma_sync_single_for_cpu(NULL, - segment-> - physAddr, - segment-> - numBytes, - memMap->dir); - break; - } - - case DMA_MEM_TYPE_USER: - { - /* Nothing to do here. */ - - break; - } - - default: - { - printk(KERN_ERR - "%s: Unsupported memory type: %d\n", - __func__, region->memType); - rc = -EINVAL; - goto out; - } - } - - segment->virtAddr = NULL; - segment->physAddr = 0; - segment->numBytes = 0; - } - - if (region->numLockedPages > 0) { - int pageIdx; - - /* Some user pages were locked. We need to go and unlock them now. */ - - for (pageIdx = 0; pageIdx < region->numLockedPages; - pageIdx++) { - struct page *page = - region->lockedPages[pageIdx]; - - if (memMap->dir == DMA_FROM_DEVICE) { - SetPageDirty(page); - } - page_cache_release(page); - } - kfree(region->lockedPages); - region->numLockedPages = 0; - region->lockedPages = NULL; - } - - region->memType = DMA_MEM_TYPE_NONE; - region->virtAddr = NULL; - region->numBytes = 0; - region->numSegmentsUsed = 0; - } - memMap->userTask = NULL; - memMap->numRegionsUsed = 0; - memMap->inUse = 0; - -out: - up(&memMap->lock); - - return rc; -} - -EXPORT_SYMBOL(dma_unmap); diff --git a/arch/arm/mach-bcmring/include/mach/dma.h b/arch/arm/mach-bcmring/include/mach/dma.h index 1f2c5319c05..72543781207 100644 --- a/arch/arm/mach-bcmring/include/mach/dma.h +++ b/arch/arm/mach-bcmring/include/mach/dma.h @@ -26,15 +26,9 @@ /* ---- Include Files ---------------------------------------------------- */ #include <linux/kernel.h> -#include <linux/wait.h> #include <linux/semaphore.h> #include <csp/dmacHw.h> #include <mach/timer.h> -#include <linux/scatterlist.h> -#include <linux/dma-mapping.h> -#include <linux/mm.h> -#include <linux/vmalloc.h> -#include <linux/pagemap.h> /* ---- Constants and Types ---------------------------------------------- */ @@ -113,78 +107,6 @@ typedef struct { /**************************************************************************** * -* The DMA_MemType_t and DMA_MemMap_t are helper structures used to setup -* DMA chains from a variety of memory sources. -* -*****************************************************************************/ - -#define DMA_MEM_MAP_MIN_SIZE 4096 /* Pages less than this size are better */ - /* off not being DMA'd. */ - -typedef enum { - DMA_MEM_TYPE_NONE, /* Not a valid setting */ - DMA_MEM_TYPE_VMALLOC, /* Memory came from vmalloc call */ - DMA_MEM_TYPE_KMALLOC, /* Memory came from kmalloc call */ - DMA_MEM_TYPE_DMA, /* Memory came from dma_alloc_xxx call */ - DMA_MEM_TYPE_USER, /* Memory came from user space. */ - -} DMA_MemType_t; - -/* A segment represents a physically and virtually contiguous chunk of memory. */ -/* i.e. each segment can be DMA'd */ -/* A user of the DMA code will add memory regions. Each region may need to be */ -/* represented by one or more segments. */ - -typedef struct { - void *virtAddr; /* Virtual address used for this segment */ - dma_addr_t physAddr; /* Physical address this segment maps to */ - size_t numBytes; /* Size of the segment, in bytes */ - -} DMA_Segment_t; - -/* A region represents a virtually contiguous chunk of memory, which may be */ -/* made up of multiple segments. */ - -typedef struct { - DMA_MemType_t memType; - void *virtAddr; - size_t numBytes; - - /* Each region (virtually contiguous) consists of one or more segments. Each */ - /* segment is virtually and physically contiguous. */ - - int numSegmentsUsed; - int numSegmentsAllocated; - DMA_Segment_t *segment; - - /* When a region corresponds to user memory, we need to lock all of the pages */ - /* down before we can figure out the physical addresses. The lockedPage array contains */ - /* the pages that were locked, and which subsequently need to be unlocked once the */ - /* memory is unmapped. */ - - unsigned numLockedPages; - struct page **lockedPages; - -} DMA_Region_t; - -typedef struct { - int inUse; /* Is this mapping currently being used? */ - struct semaphore lock; /* Acquired when using this structure */ - enum dma_data_direction dir; /* Direction this transfer is intended for */ - - /* In the event that we're mapping user memory, we need to know which task */ - /* the memory is for, so that we can obtain the correct mm locks. */ - - struct task_struct *userTask; - - int numRegionsUsed; - int numRegionsAllocated; - DMA_Region_t *region; - -} DMA_MemMap_t; - -/**************************************************************************** -* * The DMA_DeviceAttribute_t contains information which describes a * particular DMA device (or peripheral). * @@ -570,124 +492,6 @@ int dma_alloc_double_dst_descriptors(DMA_Handle_t handle, /* DMA Handle */ /****************************************************************************/ /** -* Initializes a DMA_MemMap_t data structure -*/ -/****************************************************************************/ - -int dma_init_mem_map(DMA_MemMap_t *memMap /* Stores state information about the map */ - ); - -/****************************************************************************/ -/** -* Releases any memory currently being held by a memory mapping structure. -*/ -/****************************************************************************/ - -int dma_term_mem_map(DMA_MemMap_t *memMap /* Stores state information about the map */ - ); - -/****************************************************************************/ -/** -* Looks at a memory address and categorizes it. -* -* @return One of the values from the DMA_MemType_t enumeration. -*/ -/****************************************************************************/ - -DMA_MemType_t dma_mem_type(void *addr); - -/****************************************************************************/ -/** -* Sets the process (aka userTask) associated with a mem map. This is -* required if user-mode segments will be added to the mapping. -*/ -/****************************************************************************/ - -static inline void dma_mem_map_set_user_task(DMA_MemMap_t *memMap, - struct task_struct *task) -{ - memMap->userTask = task; -} - -/****************************************************************************/ -/** -* Looks at a memory address and determines if we support DMA'ing to/from -* that type of memory. -* -* @return boolean - -* return value != 0 means dma supported -* return value == 0 means dma not supported -*/ -/****************************************************************************/ - -int dma_mem_supports_dma(void *addr); - -/****************************************************************************/ -/** -* Initializes a memory map for use. Since this function acquires a -* sempaphore within the memory map, it is VERY important that dma_unmap -* be called when you're finished using the map. -*/ -/****************************************************************************/ - -int dma_map_start(DMA_MemMap_t *memMap, /* Stores state information about the map */ - enum dma_data_direction dir /* Direction that the mapping will be going */ - ); - -/****************************************************************************/ -/** -* Adds a segment of memory to a memory map. -* -* @return 0 on success, error code otherwise. -*/ -/****************************************************************************/ - -int dma_map_add_region(DMA_MemMap_t *memMap, /* Stores state information about the map */ - void *mem, /* Virtual address that we want to get a map of */ - size_t numBytes /* Number of bytes being mapped */ - ); - -/****************************************************************************/ -/** -* Creates a descriptor ring from a memory mapping. -* -* @return 0 on success, error code otherwise. -*/ -/****************************************************************************/ - -int dma_map_create_descriptor_ring(DMA_Device_t dev, /* DMA device (where the ring is stored) */ - DMA_MemMap_t *memMap, /* Memory map that will be used */ - dma_addr_t devPhysAddr /* Physical address of device */ - ); - -/****************************************************************************/ -/** -* Maps in a memory region such that it can be used for performing a DMA. -* -* @return -*/ -/****************************************************************************/ - -int dma_map_mem(DMA_MemMap_t *memMap, /* Stores state information about the map */ - void *addr, /* Virtual address that we want to get a map of */ - size_t count, /* Number of bytes being mapped */ - enum dma_data_direction dir /* Direction that the mapping will be going */ - ); - -/****************************************************************************/ -/** -* Maps in a memory region such that it can be used for performing a DMA. -* -* @return -*/ -/****************************************************************************/ - -int dma_unmap(DMA_MemMap_t *memMap, /* Stores state information about the map */ - int dirtied /* non-zero if any of the pages were modified */ - ); - -/****************************************************************************/ -/** * Initiates a transfer when the descriptors have already been setup. * * This is a special case, and normally, the dma_transfer_xxx functions should diff --git a/arch/arm/mach-bcmring/include/mach/system.h b/arch/arm/mach-bcmring/include/mach/system.h deleted file mode 100644 index cb78250db64..00000000000 --- a/arch/arm/mach-bcmring/include/mach/system.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * - * Copyright (C) 1999 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/mach-clps711x/common.c b/arch/arm/mach-clps711x/common.c index ab1711b9b4d..8736c1acc16 100644 --- a/arch/arm/mach-clps711x/common.c +++ b/arch/arm/mach-clps711x/common.c @@ -225,3 +225,19 @@ void clps711x_restart(char mode, const char *cmd) { soft_restart(0); } + +static void clps711x_idle(void) +{ + clps_writel(1, HALT); + __asm__ __volatile__( + "mov r0, r0\n\ + mov r0, r0"); +} + +static int __init clps711x_idle_init(void) +{ + arm_pm_idle = clps711x_idle; + return 0; +} + +arch_initcall(clps711x_idle_init); diff --git a/arch/arm/mach-clps711x/include/mach/system.h b/arch/arm/mach-clps711x/include/mach/system.h deleted file mode 100644 index 23d6ef8c84d..00000000000 --- a/arch/arm/mach-clps711x/include/mach/system.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * arch/arm/mach-clps711x/include/mach/system.h - * - * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -#include <linux/io.h> -#include <mach/hardware.h> -#include <asm/hardware/clps7111.h> - -static inline void arch_idle(void) -{ - clps_writel(1, HALT); - __asm__ __volatile__( - "mov r0, r0\n\ - mov r0, r0"); -} - -#endif diff --git a/arch/arm/mach-cns3xxx/include/mach/system.h b/arch/arm/mach-cns3xxx/include/mach/system.h deleted file mode 100644 index 9e56b7dc133..00000000000 --- a/arch/arm/mach-cns3xxx/include/mach/system.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * Copyright 2000 Deep Blue Solutions Ltd - * Copyright 2003 ARM Limited - * Copyright 2008 Cavium Networks - * - * This file is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, Version 2, as - * published by the Free Software Foundation. - */ - -#ifndef __MACH_SYSTEM_H -#define __MACH_SYSTEM_H - -#include <asm/proc-fns.h> - -static inline void arch_idle(void) -{ - /* - * This should do all the clock switching - * and wait for interrupt tricks - */ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index 6b22b543a83..d5088900af6 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -44,7 +44,7 @@ #include <mach/aemif.h> #include <mach/spi.h> -#define DA850_EVM_PHY_ID "0:00" +#define DA850_EVM_PHY_ID "davinci_mdio-0:00" #define DA850_LCD_PWR_PIN GPIO_TO_PIN(2, 8) #define DA850_LCD_BL_PIN GPIO_TO_PIN(2, 15) diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index 346e1de2f5a..849311d3cb7 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -54,7 +54,7 @@ static inline int have_tvp7002(void) return 0; } -#define DM365_EVM_PHY_ID "0:01" +#define DM365_EVM_PHY_ID "davinci_mdio-0:01" /* * A MAX-II CPLD is used for various board control functions. */ diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index a64b49cfedc..1247ecdcf75 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -40,7 +40,7 @@ #include <mach/usb.h> #include <mach/aemif.h> -#define DM644X_EVM_PHY_ID "0:01" +#define DM644X_EVM_PHY_ID "davinci_mdio-0:01" #define LXT971_PHY_ID (0x001378e2) #define LXT971_PHY_MASK (0xfffffff0) diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index 64017558860..872ac69fa04 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -736,7 +736,7 @@ static struct davinci_uart_config uart_config __initdata = { .enabled_uarts = (1 << 0), }; -#define DM646X_EVM_PHY_ID "0:01" +#define DM646X_EVM_PHY_ID "davinci_mdio-0:01" /* * The following EDMA channels/slots are not being used by drivers (for * example: Timer, GPIO, UART events etc) on dm646x, hence they are being diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c index 6c4a16415d4..8d34f513d41 100644 --- a/arch/arm/mach-davinci/board-neuros-osd2.c +++ b/arch/arm/mach-davinci/board-neuros-osd2.c @@ -39,7 +39,7 @@ #include <mach/mmc.h> #include <mach/usb.h> -#define NEUROS_OSD2_PHY_ID "0:01" +#define NEUROS_OSD2_PHY_ID "davinci_mdio-0:01" #define LXT971_PHY_ID 0x001378e2 #define LXT971_PHY_MASK 0xfffffff0 diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c index e7c0c7c5349..45e815760a2 100644 --- a/arch/arm/mach-davinci/board-omapl138-hawk.c +++ b/arch/arm/mach-davinci/board-omapl138-hawk.c @@ -21,7 +21,7 @@ #include <mach/da8xx.h> #include <mach/mux.h> -#define HAWKBOARD_PHY_ID "0:07" +#define HAWKBOARD_PHY_ID "davinci_mdio-0:07" #define DA850_HAWK_MMCSD_CD_PIN GPIO_TO_PIN(3, 12) #define DA850_HAWK_MMCSD_WP_PIN GPIO_TO_PIN(3, 13) diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c index 0b136a831c5..31da3c5b2ba 100644 --- a/arch/arm/mach-davinci/board-sffsdr.c +++ b/arch/arm/mach-davinci/board-sffsdr.c @@ -42,7 +42,7 @@ #include <mach/mux.h> #include <mach/usb.h> -#define SFFSDR_PHY_ID "0:01" +#define SFFSDR_PHY_ID "davinci_mdio-0:01" static struct mtd_partition davinci_sffsdr_nandflash_partition[] = { /* U-Boot Environment: Block 0 * UBL: Block 1 diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index 0ed7fdb64ef..992c4c41018 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -153,34 +153,6 @@ static struct clk pll1_sysclk3 = { .div_reg = PLLDIV3, }; -static struct clk pll1_sysclk4 = { - .name = "pll1_sysclk4", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV4, -}; - -static struct clk pll1_sysclk5 = { - .name = "pll1_sysclk5", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV5, -}; - -static struct clk pll1_sysclk6 = { - .name = "pll0_sysclk6", - .parent = &pll0_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV6, -}; - -static struct clk pll1_sysclk7 = { - .name = "pll1_sysclk7", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV7, -}; - static struct clk i2c0_clk = { .name = "i2c0", .parent = &pll0_aux_clk, @@ -397,10 +369,6 @@ static struct clk_lookup da850_clks[] = { CLK(NULL, "pll1_aux", &pll1_aux_clk), CLK(NULL, "pll1_sysclk2", &pll1_sysclk2), CLK(NULL, "pll1_sysclk3", &pll1_sysclk3), - CLK(NULL, "pll1_sysclk4", &pll1_sysclk4), - CLK(NULL, "pll1_sysclk5", &pll1_sysclk5), - CLK(NULL, "pll1_sysclk6", &pll1_sysclk6), - CLK(NULL, "pll1_sysclk7", &pll1_sysclk7), CLK("i2c_davinci.1", NULL, &i2c0_clk), CLK(NULL, "timer0", &timerp64_0_clk), CLK("watchdog", NULL, &timerp64_1_clk), diff --git a/arch/arm/mach-davinci/include/mach/system.h b/arch/arm/mach-davinci/include/mach/system.h deleted file mode 100644 index fcb7a015aba..00000000000 --- a/arch/arm/mach-davinci/include/mach/system.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * DaVinci system defines - * - * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com> - * - * 2007 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -#include <mach/common.h> - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -#endif /* __ASM_ARCH_SYSTEM_H */ diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c index dd1429ae640..bda7aca04ca 100644 --- a/arch/arm/mach-dove/common.c +++ b/arch/arm/mach-dove/common.c @@ -28,6 +28,7 @@ #include <asm/mach/arch.h> #include <linux/irq.h> #include <plat/time.h> +#include <plat/ehci-orion.h> #include <plat/common.h> #include <plat/addr-map.h> #include "common.h" @@ -71,7 +72,7 @@ void __init dove_map_io(void) ****************************************************************************/ void __init dove_ehci0_init(void) { - orion_ehci_init(DOVE_USB0_PHYS_BASE, IRQ_DOVE_USB0); + orion_ehci_init(DOVE_USB0_PHYS_BASE, IRQ_DOVE_USB0, EHCI_PHY_NA); } /***************************************************************************** diff --git a/arch/arm/mach-dove/include/mach/system.h b/arch/arm/mach-dove/include/mach/system.h deleted file mode 100644 index 3027954f616..00000000000 --- a/arch/arm/mach-dove/include/mach/system.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * arch/arm/mach-dove/include/mach/system.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c index 294aad07f7a..804c9122b7b 100644 --- a/arch/arm/mach-ebsa110/core.c +++ b/arch/arm/mach-ebsa110/core.c @@ -271,8 +271,33 @@ static struct platform_device *ebsa110_devices[] = { &am79c961_device, }; +/* + * EBSA110 idling methodology: + * + * We can not execute the "wait for interrupt" instruction since that + * will stop our MCLK signal (which provides the clock for the glue + * logic, and therefore the timer interrupt). + * + * Instead, we spin, polling the IRQ_STAT register for the occurrence + * of any interrupt with core clock down to the memory clock. + */ +static void ebsa110_idle(void) +{ + const char *irq_stat = (char *)0xff000000; + + /* disable clock switching */ + asm volatile ("mcr p15, 0, ip, c15, c2, 2" : : : "cc"); + + /* wait for an interrupt to occur */ + while (!*irq_stat); + + /* enable clock switching */ + asm volatile ("mcr p15, 0, ip, c15, c1, 2" : : : "cc"); +} + static int __init ebsa110_init(void) { + arm_pm_idle = ebsa110_idle; return platform_add_devices(ebsa110_devices, ARRAY_SIZE(ebsa110_devices)); } diff --git a/arch/arm/mach-ebsa110/include/mach/system.h b/arch/arm/mach-ebsa110/include/mach/system.h deleted file mode 100644 index 2e4af65edb6..00000000000 --- a/arch/arm/mach-ebsa110/include/mach/system.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * arch/arm/mach-ebsa110/include/mach/system.h - * - * Copyright (C) 1996-2000 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -/* - * EBSA110 idling methodology: - * - * We can not execute the "wait for interrupt" instruction since that - * will stop our MCLK signal (which provides the clock for the glue - * logic, and therefore the timer interrupt). - * - * Instead, we spin, polling the IRQ_STAT register for the occurrence - * of any interrupt with core clock down to the memory clock. - */ -static inline void arch_idle(void) -{ - const char *irq_stat = (char *)0xff000000; - - /* disable clock switching */ - asm volatile ("mcr p15, 0, ip, c15, c2, 2" : : : "cc"); - - /* wait for an interrupt to occur */ - while (!*irq_stat); - - /* enable clock switching */ - asm volatile ("mcr p15, 0, ip, c15, c1, 2" : : : "cc"); -} - -#endif diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 24203f9a679..903edb02fe4 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -279,48 +279,14 @@ static struct amba_pl010_data ep93xx_uart_data = { .set_mctrl = ep93xx_uart_set_mctrl, }; -static struct amba_device uart1_device = { - .dev = { - .init_name = "apb:uart1", - .platform_data = &ep93xx_uart_data, - }, - .res = { - .start = EP93XX_UART1_PHYS_BASE, - .end = EP93XX_UART1_PHYS_BASE + 0x0fff, - .flags = IORESOURCE_MEM, - }, - .irq = { IRQ_EP93XX_UART1, NO_IRQ }, - .periphid = 0x00041010, -}; - -static struct amba_device uart2_device = { - .dev = { - .init_name = "apb:uart2", - .platform_data = &ep93xx_uart_data, - }, - .res = { - .start = EP93XX_UART2_PHYS_BASE, - .end = EP93XX_UART2_PHYS_BASE + 0x0fff, - .flags = IORESOURCE_MEM, - }, - .irq = { IRQ_EP93XX_UART2, NO_IRQ }, - .periphid = 0x00041010, -}; +static AMBA_APB_DEVICE(uart1, "apb:uart1", 0x00041010, EP93XX_UART1_PHYS_BASE, + { IRQ_EP93XX_UART1 }, &ep93xx_uart_data); -static struct amba_device uart3_device = { - .dev = { - .init_name = "apb:uart3", - .platform_data = &ep93xx_uart_data, - }, - .res = { - .start = EP93XX_UART3_PHYS_BASE, - .end = EP93XX_UART3_PHYS_BASE + 0x0fff, - .flags = IORESOURCE_MEM, - }, - .irq = { IRQ_EP93XX_UART3, NO_IRQ }, - .periphid = 0x00041010, -}; +static AMBA_APB_DEVICE(uart2, "apb:uart2", 0x00041010, EP93XX_UART2_PHYS_BASE, + { IRQ_EP93XX_UART2 }, &ep93xx_uart_data); +static AMBA_APB_DEVICE(uart3, "apb:uart3", 0x00041010, EP93XX_UART3_PHYS_BASE, + { IRQ_EP93XX_UART3 }, &ep93xx_uart_data); static struct resource ep93xx_rtc_resource[] = { { diff --git a/arch/arm/mach-ep93xx/include/mach/system.h b/arch/arm/mach-ep93xx/include/mach/system.h deleted file mode 100644 index b5bec7cb9b5..00000000000 --- a/arch/arm/mach-ep93xx/include/mach/system.h +++ /dev/null @@ -1,7 +0,0 @@ -/* - * arch/arm/mach-ep93xx/include/mach/system.h - */ -static inline void arch_idle(void) -{ - cpu_do_idle(); -} diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c index 03dd4012043..d5fb44f16d3 100644 --- a/arch/arm/mach-ep93xx/vision_ep9307.c +++ b/arch/arm/mach-ep93xx/vision_ep9307.c @@ -32,6 +32,7 @@ #include <mach/hardware.h> #include <mach/fb.h> #include <mach/ep93xx_spi.h> +#include <mach/gpio-ep93xx.h> #include <asm/mach-types.h> #include <asm/mach/map.h> @@ -153,7 +154,6 @@ static struct i2c_board_info vision_i2c_info[] __initdata = { }, { I2C_BOARD_INFO("pca9539", 0x74), .platform_data = &pca953x_74_gpio_data, - .irq = gpio_to_irq(EP93XX_GPIO_LINE_F(7)), }, { I2C_BOARD_INFO("pca9539", 0x75), .platform_data = &pca953x_75_gpio_data, @@ -348,6 +348,8 @@ static void __init vision_init_machine(void) "pca9539:74")) pr_warn("cannot request interrupt gpio for pca9539:74\n"); + vision_i2c_info[1].irq = gpio_to_irq(EP93XX_GPIO_LINE_F(7)); + ep93xx_register_i2c(&vision_i2c_gpio_data, vision_i2c_info, ARRAY_SIZE(vision_i2c_info)); ep93xx_register_spi(&vision_spi_master, vision_spi_board_info, diff --git a/arch/arm/mach-exynos/clock-exynos4210.c b/arch/arm/mach-exynos/clock-exynos4210.c index a5823a7f249..13312ccb2d9 100644 --- a/arch/arm/mach-exynos/clock-exynos4210.c +++ b/arch/arm/mach-exynos/clock-exynos4210.c @@ -32,6 +32,7 @@ #include "common.h" +#ifdef CONFIG_PM_SLEEP static struct sleep_save exynos4210_clock_save[] = { SAVE_ITEM(S5P_CLKSRC_IMAGE), SAVE_ITEM(S5P_CLKSRC_LCD1), @@ -42,6 +43,7 @@ static struct sleep_save exynos4210_clock_save[] = { SAVE_ITEM(S5P_CLKGATE_IP_LCD1), SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4210), }; +#endif static struct clksrc_clk *sysclks[] = { /* nothing here yet */ diff --git a/arch/arm/mach-exynos/clock-exynos4212.c b/arch/arm/mach-exynos/clock-exynos4212.c index 26a668b0d10..48af28566fa 100644 --- a/arch/arm/mach-exynos/clock-exynos4212.c +++ b/arch/arm/mach-exynos/clock-exynos4212.c @@ -32,12 +32,14 @@ #include "common.h" +#ifdef CONFIG_PM_SLEEP static struct sleep_save exynos4212_clock_save[] = { SAVE_ITEM(S5P_CLKSRC_IMAGE), SAVE_ITEM(S5P_CLKDIV_IMAGE), SAVE_ITEM(S5P_CLKGATE_IP_IMAGE_4212), SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4212), }; +#endif static struct clk *clk_src_mpll_user_list[] = { [0] = &clk_fin_mpll, diff --git a/arch/arm/mach-exynos/clock.c b/arch/arm/mach-exynos/clock.c index 5a8c42e9000..187287aa57a 100644 --- a/arch/arm/mach-exynos/clock.c +++ b/arch/arm/mach-exynos/clock.c @@ -30,6 +30,7 @@ #include "common.h" +#ifdef CONFIG_PM_SLEEP static struct sleep_save exynos4_clock_save[] = { SAVE_ITEM(S5P_CLKDIV_LEFTBUS), SAVE_ITEM(S5P_CLKGATE_IP_LEFTBUS), @@ -93,6 +94,7 @@ static struct sleep_save exynos4_clock_save[] = { SAVE_ITEM(S5P_CLKGATE_SCLKCPU), SAVE_ITEM(S5P_CLKGATE_IP_CPU), }; +#endif struct clk clk_sclk_hdmi27m = { .name = "sclk_hdmi27m", diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index c59e1887100..031c1e5b3df 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -201,14 +201,6 @@ static struct map_desc exynos4_iodesc1[] __initdata = { }, }; -static void exynos_idle(void) -{ - if (!need_resched()) - cpu_do_idle(); - - local_irq_enable(); -} - void exynos4_restart(char mode, const char *cmd) { __raw_writel(0x1, S5P_SWRESET); @@ -467,10 +459,6 @@ early_initcall(exynos4_l2x0_cache_init); int __init exynos_init(void) { printk(KERN_INFO "EXYNOS: Initializing architecture\n"); - - /* set idle function */ - pm_idle = exynos_idle; - return device_register(&exynos4_dev); } diff --git a/arch/arm/mach-exynos/dma.c b/arch/arm/mach-exynos/dma.c index b10fcd270f0..91370def4a7 100644 --- a/arch/arm/mach-exynos/dma.c +++ b/arch/arm/mach-exynos/dma.c @@ -74,21 +74,8 @@ struct dma_pl330_platdata exynos4_pdma0_pdata = { .peri_id = pdma0_peri, }; -struct amba_device exynos4_device_pdma0 = { - .dev = { - .init_name = "dma-pl330.0", - .dma_mask = &dma_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &exynos4_pdma0_pdata, - }, - .res = { - .start = EXYNOS4_PA_PDMA0, - .end = EXYNOS4_PA_PDMA0 + SZ_4K, - .flags = IORESOURCE_MEM, - }, - .irq = {IRQ_PDMA0, NO_IRQ}, - .periphid = 0x00041330, -}; +AMBA_AHB_DEVICE(exynos4_pdma0, "dma-pl330.0", 0x00041330, EXYNOS4_PA_PDMA0, + {IRQ_PDMA0}, &exynos4_pdma0_pdata); u8 pdma1_peri[] = { DMACH_PCM0_RX, @@ -123,21 +110,8 @@ struct dma_pl330_platdata exynos4_pdma1_pdata = { .peri_id = pdma1_peri, }; -struct amba_device exynos4_device_pdma1 = { - .dev = { - .init_name = "dma-pl330.1", - .dma_mask = &dma_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &exynos4_pdma1_pdata, - }, - .res = { - .start = EXYNOS4_PA_PDMA1, - .end = EXYNOS4_PA_PDMA1 + SZ_4K, - .flags = IORESOURCE_MEM, - }, - .irq = {IRQ_PDMA1, NO_IRQ}, - .periphid = 0x00041330, -}; +AMBA_AHB_DEVICE(exynos4_pdma1, "dma-pl330.1", 0x00041330, EXYNOS4_PA_PDMA1, + {IRQ_PDMA1}, &exynos4_pdma1_pdata); static int __init exynos4_dma_init(void) { @@ -146,11 +120,11 @@ static int __init exynos4_dma_init(void) dma_cap_set(DMA_SLAVE, exynos4_pdma0_pdata.cap_mask); dma_cap_set(DMA_CYCLIC, exynos4_pdma0_pdata.cap_mask); - amba_device_register(&exynos4_device_pdma0, &iomem_resource); + amba_device_register(&exynos4_pdma0_device, &iomem_resource); dma_cap_set(DMA_SLAVE, exynos4_pdma1_pdata.cap_mask); dma_cap_set(DMA_CYCLIC, exynos4_pdma1_pdata.cap_mask); - amba_device_register(&exynos4_device_pdma1, &iomem_resource); + amba_device_register(&exynos4_pdma1_device, &iomem_resource); return 0; } diff --git a/arch/arm/mach-exynos/include/mach/system.h b/arch/arm/mach-exynos/include/mach/system.h deleted file mode 100644 index 0063a6de3dc..00000000000 --- a/arch/arm/mach-exynos/include/mach/system.h +++ /dev/null @@ -1,20 +0,0 @@ -/* linux/arch/arm/mach-exynos4/include/mach/system.h - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS4 - system support header - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H __FILE__ - -static void arch_idle(void) -{ - /* nothing here yet */ -} -#endif /* __ASM_ARCH_SYSTEM_H */ diff --git a/arch/arm/mach-exynos/mach-exynos4-dt.c b/arch/arm/mach-exynos/mach-exynos4-dt.c index 85fa02767d6..e6b02fdf1b0 100644 --- a/arch/arm/mach-exynos/mach-exynos4-dt.c +++ b/arch/arm/mach-exynos/mach-exynos4-dt.c @@ -15,11 +15,13 @@ #include <linux/serial_core.h> #include <asm/mach/arch.h> +#include <asm/hardware/gic.h> #include <mach/map.h> #include <plat/cpu.h> #include <plat/regs-serial.h> -#include <plat/exynos4.h> + +#include "common.h" /* * The following lookup table is used to override device names when devices @@ -60,7 +62,7 @@ static const struct of_dev_auxdata exynos4210_auxdata_lookup[] __initconst = { static void __init exynos4210_dt_map_io(void) { - s5p_init_io(NULL, 0, S5P_VA_CHIPID); + exynos_init_io(NULL, 0); s3c24xx_init_clocks(24000000); } @@ -79,7 +81,9 @@ DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)") /* Maintainer: Thomas Abraham <thomas.abraham@linaro.org> */ .init_irq = exynos4_init_irq, .map_io = exynos4210_dt_map_io, + .handle_irq = gic_handle_irq, .init_machine = exynos4210_dt_machine_init, .timer = &exynos4_timer, .dt_compat = exynos4210_dt_compat, + .restart = exynos4_restart, MACHINE_END diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c index b895ec03110..435261f83f4 100644 --- a/arch/arm/mach-exynos/mach-nuri.c +++ b/arch/arm/mach-exynos/mach-nuri.c @@ -220,14 +220,14 @@ static struct s3c_fb_pd_win nuri_fb_win0 = { .lower_margin = 1, .hsync_len = 48, .vsync_len = 3, - .xres = 1280, - .yres = 800, + .xres = 1024, + .yres = 600, .refresh = 60, }, .max_bpp = 24, .default_bpp = 16, - .virtual_x = 1280, - .virtual_y = 800, + .virtual_x = 1024, + .virtual_y = 2 * 600, }; static struct s3c_fb_platdata nuri_fb_pdata __initdata = { diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c index 37ac93e8d6d..0fc65ffde8f 100644 --- a/arch/arm/mach-exynos/mach-universal_c210.c +++ b/arch/arm/mach-exynos/mach-universal_c210.c @@ -910,7 +910,7 @@ static struct s5p_fimc_isp_info universal_camera_sensors[] = { .bus_type = FIMC_MIPI_CSI2, .board_info = &m5mols_board_info, .i2c_bus_num = 0, - .clk_frequency = 21600000UL, + .clk_frequency = 24000000UL, .csi_data_align = 32, }, }; diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c index a4f61a43c7b..e1901305177 100644 --- a/arch/arm/mach-exynos/pm.c +++ b/arch/arm/mach-exynos/pm.c @@ -206,7 +206,7 @@ static void exynos4_pm_prepare(void) } -static int exynos4_pm_add(struct device *dev) +static int exynos4_pm_add(struct device *dev, struct subsys_interface *sif) { pm_cpu_prep = exynos4_pm_prepare; pm_cpu_sleep = exynos4_cpu_suspend; @@ -384,7 +384,9 @@ static void exynos4_pm_resume(void) exynos4_restore_pll(); +#ifdef CONFIG_SMP scu_enable(S5P_VA_SCU); +#endif #ifdef CONFIG_CACHE_L2X0 s3c_pm_do_restore_core(exynos4_l2cc_save, ARRAY_SIZE(exynos4_l2cc_save)); diff --git a/arch/arm/mach-footbridge/include/mach/system.h b/arch/arm/mach-footbridge/include/mach/system.h deleted file mode 100644 index a174a5841bc..00000000000 --- a/arch/arm/mach-footbridge/include/mach/system.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * arch/arm/mach-footbridge/include/mach/system.h - * - * Copyright (C) 1996-1999 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -static inline void arch_idle(void) -{ - cpu_do_idle(); -} diff --git a/arch/arm/mach-gemini/Makefile b/arch/arm/mach-gemini/Makefile index c5b24b95a76..7355c0bbcb5 100644 --- a/arch/arm/mach-gemini/Makefile +++ b/arch/arm/mach-gemini/Makefile @@ -4,7 +4,7 @@ # Object file lists. -obj-y := irq.o mm.o time.o devices.o gpio.o +obj-y := irq.o mm.o time.o devices.o gpio.o idle.o # Board-specific support obj-$(CONFIG_MACH_NAS4220B) += board-nas4220b.o diff --git a/arch/arm/mach-gemini/idle.c b/arch/arm/mach-gemini/idle.c new file mode 100644 index 00000000000..92bbd6bb600 --- /dev/null +++ b/arch/arm/mach-gemini/idle.c @@ -0,0 +1,29 @@ +/* + * arch/arm/mach-gemini/idle.c + */ + +#include <linux/init.h> +#include <asm/system.h> +#include <asm/proc-fns.h> + +static void gemini_idle(void) +{ + /* + * Because of broken hardware we have to enable interrupts or the CPU + * will never wakeup... Acctualy it is not very good to enable + * interrupts first since scheduler can miss a tick, but there is + * no other way around this. Platforms that needs it for power saving + * should call enable_hlt() in init code, since by default it is + * disabled. + */ + local_irq_enable(); + cpu_do_idle(); +} + +static int __init gemini_idle_init(void) +{ + arm_pm_idle = gemini_idle; + return 0; +} + +arch_initcall(gemini_idle_init); diff --git a/arch/arm/mach-gemini/include/mach/system.h b/arch/arm/mach-gemini/include/mach/system.h index 4d9c1f87247..a33b5a1f8ab 100644 --- a/arch/arm/mach-gemini/include/mach/system.h +++ b/arch/arm/mach-gemini/include/mach/system.h @@ -14,20 +14,6 @@ #include <mach/hardware.h> #include <mach/global_reg.h> -static inline void arch_idle(void) -{ - /* - * Because of broken hardware we have to enable interrupts or the CPU - * will never wakeup... Acctualy it is not very good to enable - * interrupts here since scheduler can miss a tick, but there is - * no other way around this. Platforms that needs it for power saving - * should call enable_hlt() in init code, since by default it is - * disabled. - */ - local_irq_enable(); - cpu_do_idle(); -} - static inline void arch_reset(char mode, const char *cmd) { __raw_writel(RESET_GLOBAL | RESET_CPU1, diff --git a/arch/arm/mach-gemini/irq.c b/arch/arm/mach-gemini/irq.c index 9485a8fdf85..ca70e5fcc7a 100644 --- a/arch/arm/mach-gemini/irq.c +++ b/arch/arm/mach-gemini/irq.c @@ -73,8 +73,8 @@ void __init gemini_init_irq(void) unsigned int i, mode = 0, level = 0; /* - * Disable arch_idle() by default since it is buggy - * For more info see arch/arm/mach-gemini/include/mach/system.h + * Disable the idle handler by default since it is buggy + * For more info see arch/arm/mach-gemini/idle.c */ disable_hlt(); diff --git a/arch/arm/mach-h720x/common.c b/arch/arm/mach-h720x/common.c index f8a2f6bb548..e756d1ac00c 100644 --- a/arch/arm/mach-h720x/common.c +++ b/arch/arm/mach-h720x/common.c @@ -247,3 +247,21 @@ void h720x_restart(char mode, const char *cmd) { CPU_REG (PMU_BASE, PMU_STAT) |= PMU_WARMRESET; } + +static void h720x__idle(void) +{ + CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_IDLE; + nop(); + nop(); + CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_RUN; + nop(); + nop(); +} + +static int __init h720x_idle_init(void) +{ + arm_pm_idle = h720x__idle; + return 0; +} + +arch_initcall(h720x_idle_init); diff --git a/arch/arm/mach-h720x/include/mach/system.h b/arch/arm/mach-h720x/include/mach/system.h deleted file mode 100644 index 16ac46e239a..00000000000 --- a/arch/arm/mach-h720x/include/mach/system.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * arch/arm/mach-h720x/include/mach/system.h - * - * Copyright (C) 2001-2002 Jungjun Kim, Hynix Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * arch/arm/mach-h720x/include/mach/system.h - * - */ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H -#include <mach/hardware.h> - -static void arch_idle(void) -{ - CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_IDLE; - nop(); - nop(); - CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_RUN; - nop(); - nop(); -} - -#endif diff --git a/arch/arm/mach-highbank/include/mach/system.h b/arch/arm/mach-highbank/include/mach/system.h deleted file mode 100644 index b1d8b5fbe37..00000000000 --- a/arch/arm/mach-highbank/include/mach/system.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * Copyright 2010-2011 Calxeda, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program. If not, see <http://www.gnu.org/licenses/>. - */ -#ifndef __MACH_SYSTEM_H -#define __MACH_SYSTEM_H - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 4defb97bbfc..f7da8724965 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -304,6 +304,7 @@ config MACH_MX27_3DS select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_KEYPAD select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MX2_CAMERA select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_MMC select IMX_HAVE_PLATFORM_SPI_IMX diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c index 8d9f95514b1..e432d4acee1 100644 --- a/arch/arm/mach-imx/mach-mx21ads.c +++ b/arch/arm/mach-imx/mach-mx21ads.c @@ -37,8 +37,8 @@ #define MX21ADS_REG_ADDR(offset) (void __force __iomem *) \ (MX21ADS_MMIO_BASE_ADDR + (offset)) +#define MX21ADS_CS8900A_MMIO_SIZE 0x200000 #define MX21ADS_CS8900A_IRQ IRQ_GPIOE(11) -#define MX21ADS_CS8900A_IOBASE_REG MX21ADS_REG_ADDR(0x000000) #define MX21ADS_ST16C255_IOBASE_REG MX21ADS_REG_ADDR(0x200000) #define MX21ADS_VERSION_REG MX21ADS_REG_ADDR(0x400000) #define MX21ADS_IO_REG MX21ADS_REG_ADDR(0x800000) @@ -159,6 +159,18 @@ static struct platform_device mx21ads_nor_mtd_device = { .resource = &mx21ads_flash_resource, }; +static const struct resource mx21ads_cs8900_resources[] __initconst = { + DEFINE_RES_MEM(MX21_CS1_BASE_ADDR, MX21ADS_CS8900A_MMIO_SIZE), + DEFINE_RES_IRQ(MX21ADS_CS8900A_IRQ), +}; + +static const struct platform_device_info mx21ads_cs8900_devinfo __initconst = { + .name = "cs89x0", + .id = 0, + .res = mx21ads_cs8900_resources, + .num_res = ARRAY_SIZE(mx21ads_cs8900_resources), +}; + static const struct imxuart_platform_data uart_pdata_rts __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; @@ -292,6 +304,8 @@ static void __init mx21ads_board_init(void) imx21_add_mxc_nand(&mx21ads_nand_board_info); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); + platform_device_register_full( + (struct platform_device_info *)&mx21ads_cs8900_devinfo); } static void __init mx21ads_timer_init(void) diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c index 18f35816706..c6d385c5225 100644 --- a/arch/arm/mach-imx/mach-mx27_3ds.c +++ b/arch/arm/mach-imx/mach-mx27_3ds.c @@ -31,6 +31,8 @@ #include <linux/regulator/machine.h> #include <linux/spi/l4f00242t03.h> +#include <media/soc_camera.h> + #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> @@ -52,6 +54,8 @@ #define SD1_CD IMX_GPIO_NR(2, 26) #define LCD_RESET IMX_GPIO_NR(1, 3) #define LCD_ENABLE IMX_GPIO_NR(1, 31) +#define CSI_PWRDWN IMX_GPIO_NR(4, 19) +#define CSI_RESET IMX_GPIO_NR(3, 6) static const int mx27pdk_pins[] __initconst = { /* UART1 */ @@ -141,6 +145,26 @@ static const int mx27pdk_pins[] __initconst = { PA30_PF_CONTRAST, LCD_ENABLE | GPIO_GPIO | GPIO_OUT, LCD_RESET | GPIO_GPIO | GPIO_OUT, + /* CSI */ + PB10_PF_CSI_D0, + PB11_PF_CSI_D1, + PB12_PF_CSI_D2, + PB13_PF_CSI_D3, + PB14_PF_CSI_D4, + PB15_PF_CSI_MCLK, + PB16_PF_CSI_PIXCLK, + PB17_PF_CSI_D5, + PB18_PF_CSI_D6, + PB19_PF_CSI_D7, + PB20_PF_CSI_VSYNC, + PB21_PF_CSI_HSYNC, + CSI_PWRDWN | GPIO_GPIO | GPIO_OUT, + CSI_RESET | GPIO_GPIO | GPIO_OUT, +}; + +static struct gpio mx27_3ds_camera_gpios[] = { + { CSI_PWRDWN, GPIOF_OUT_INIT_HIGH, "camera-power" }, + { CSI_RESET, GPIOF_OUT_INIT_HIGH, "camera-reset" }, }; static const struct imxuart_platform_data uart_pdata __initconst = { @@ -242,6 +266,7 @@ static struct regulator_init_data gpo_init = { static struct regulator_consumer_supply vmmc1_consumers[] = { REGULATOR_SUPPLY("vcore", "spi0.0"), + REGULATOR_SUPPLY("cmos_2v8", "soc-camera-pdrv.0"), }; static struct regulator_init_data vmmc1_init = { @@ -270,6 +295,22 @@ static struct regulator_init_data vgen_init = { .consumer_supplies = vgen_consumers, }; +static struct regulator_consumer_supply vvib_consumers[] = { + REGULATOR_SUPPLY("cmos_vcore", "soc-camera-pdrv.0"), +}; + +static struct regulator_init_data vvib_init = { + .constraints = { + .min_uV = 1300000, + .max_uV = 1300000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(vvib_consumers), + .consumer_supplies = vvib_consumers, +}; + static struct mc13xxx_regulator_init_data mx27_3ds_regulators[] = { { .id = MC13783_REG_VMMC1, @@ -283,6 +324,9 @@ static struct mc13xxx_regulator_init_data mx27_3ds_regulators[] = { }, { .id = MC13783_REG_GPO3, /* Turn on 3.3V */ .init_data = &gpo_init, + }, { + .id = MC13783_REG_VVIB, /* Power OV2640 */ + .init_data = &vvib_init, }, }; @@ -311,6 +355,51 @@ static const struct spi_imx_master spi2_pdata __initconst = { .num_chipselect = ARRAY_SIZE(spi2_chipselect), }; +static int mx27_3ds_camera_power(struct device *dev, int on) +{ + /* enable or disable the camera */ + pr_debug("%s: %s the camera\n", __func__, on ? "ENABLE" : "DISABLE"); + gpio_set_value(CSI_PWRDWN, on ? 0 : 1); + + if (!on) + goto out; + + /* If enabled, give a reset impulse */ + gpio_set_value(CSI_RESET, 0); + msleep(20); + gpio_set_value(CSI_RESET, 1); + msleep(100); + +out: + return 0; +} + +static struct i2c_board_info mx27_3ds_i2c_camera = { + I2C_BOARD_INFO("ov2640", 0x30), +}; + +static struct regulator_bulk_data mx27_3ds_camera_regs[] = { + { .supply = "cmos_vcore" }, + { .supply = "cmos_2v8" }, +}; + +static struct soc_camera_link iclink_ov2640 = { + .bus_id = 0, + .board_info = &mx27_3ds_i2c_camera, + .i2c_adapter_id = 0, + .power = mx27_3ds_camera_power, + .regulators = mx27_3ds_camera_regs, + .num_regulators = ARRAY_SIZE(mx27_3ds_camera_regs), +}; + +static struct platform_device mx27_3ds_ov2640 = { + .name = "soc-camera-pdrv", + .id = 0, + .dev = { + .platform_data = &iclink_ov2640, + }, +}; + static struct imx_fb_videomode mx27_3ds_modes[] = { { /* 480x640 @ 60 Hz */ .mode = { @@ -367,12 +456,21 @@ static struct spi_board_info mx27_3ds_spi_devs[] __initdata = { }, }; +static struct platform_device *devices[] __initdata = { + &mx27_3ds_ov2640, +}; + +static const struct mx2_camera_platform_data mx27_3ds_cam_pdata __initconst = { + .clk = 26000000, +}; + static const struct imxi2c_platform_data mx27_3ds_i2c0_data __initconst = { .bitrate = 100000, }; static void __init mx27pdk_init(void) { + int ret; imx27_soc_init(); mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins), @@ -404,7 +502,17 @@ static void __init mx27pdk_init(void) if (mxc_expio_init(MX27_CS5_BASE_ADDR, EXPIO_PARENT_INT)) pr_warn("Init of the debugboard failed, all devices on the debugboard are unusable.\n"); imx27_add_imx_i2c(0, &mx27_3ds_i2c0_data); + platform_add_devices(devices, ARRAY_SIZE(devices)); imx27_add_imx_fb(&mx27_3ds_fb_data); + + ret = gpio_request_array(mx27_3ds_camera_gpios, + ARRAY_SIZE(mx27_3ds_camera_gpios)); + if (ret) { + pr_err("Failed to request camera gpios"); + iclink_ov2640.power = NULL; + } + + imx27_add_mx2_camera(&mx27_3ds_cam_pdata); } static void __init mx27pdk_timer_init(void) diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c index 4917aab0e25..4518e544822 100644 --- a/arch/arm/mach-imx/mach-mx31ads.c +++ b/arch/arm/mach-imx/mach-mx31ads.c @@ -28,7 +28,6 @@ #include <asm/memory.h> #include <asm/mach/map.h> #include <mach/common.h> -#include <mach/board-mx31ads.h> #include <mach/iomux-mx3.h> #ifdef CONFIG_MACH_MX31ADS_WM1133_EV1 @@ -39,6 +38,9 @@ #include "devices-imx31.h" +/* Base address of PBC controller */ +#define PBC_BASE_ADDRESS MX31_CS4_BASE_ADDR_VIRT + /* PBC Board interrupt status register */ #define PBC_INTSTATUS 0x000016 @@ -62,6 +64,7 @@ #define PBC_INTMASK_CLEAR_REG (PBC_INTMASK_CLEAR + PBC_BASE_ADDRESS) #define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX31_PIN_GPIO1_4) +#define MXC_EXP_IO_BASE MXC_BOARD_IRQ_START #define MXC_IRQ_TO_EXPIO(irq) ((irq) - MXC_EXP_IO_BASE) #define EXPIO_INT_XUART_INTA (MXC_EXP_IO_BASE + 10) @@ -69,6 +72,10 @@ #define MXC_MAX_EXP_IO_LINES 16 +/* CS8900 */ +#define EXPIO_INT_ENET_INT (MXC_EXP_IO_BASE + 8) +#define CS4_CS8900_MMIO_START 0x20000 + /* * The serial port definition structure. */ @@ -101,11 +108,29 @@ static struct platform_device serial_device = { }, }; +static const struct resource mx31ads_cs8900_resources[] __initconst = { + DEFINE_RES_MEM(MX31_CS4_BASE_ADDR + CS4_CS8900_MMIO_START, SZ_64K), + DEFINE_RES_IRQ(EXPIO_INT_ENET_INT), +}; + +static const struct platform_device_info mx31ads_cs8900_devinfo __initconst = { + .name = "cs89x0", + .id = 0, + .res = mx31ads_cs8900_resources, + .num_res = ARRAY_SIZE(mx31ads_cs8900_resources), +}; + static int __init mxc_init_extuart(void) { return platform_device_register(&serial_device); } +static void __init mxc_init_ext_ethernet(void) +{ + platform_device_register_full( + (struct platform_device_info *)&mx31ads_cs8900_devinfo); +} + static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; @@ -492,12 +517,15 @@ static void __init mxc_init_audio(void) mxc_iomux_setup_multiple_pins(ssi_pins, ARRAY_SIZE(ssi_pins), "ssi"); } -/* static mappings */ +/* + * Static mappings, starting from the CS4 start address up to the start address + * of the CS8900. + */ static struct map_desc mx31ads_io_desc[] __initdata = { { .virtual = MX31_CS4_BASE_ADDR_VIRT, .pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR), - .length = MX31_CS4_SIZE / 2, + .length = CS4_CS8900_MMIO_START, .type = MT_DEVICE }, }; @@ -522,6 +550,7 @@ static void __init mx31ads_init(void) mxc_init_imx_uart(); mxc_init_i2c(); mxc_init_audio(); + mxc_init_ext_ethernet(); } static void __init mx31ads_timer_init(void) diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c index f225262b5c3..96e042d0c9a 100644 --- a/arch/arm/mach-imx/mach-mx31moboard.c +++ b/arch/arm/mach-imx/mach-mx31moboard.c @@ -507,7 +507,7 @@ static void mx31moboard_poweroff(void) struct clk *clk = clk_get_sys("imx2-wdt.0", NULL); if (!IS_ERR(clk)) - clk_enable(clk); + clk_prepare_enable(clk); mxc_iomux_mode(MX31_PIN_WATCHDOG_RST__WATCHDOG_RST); diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c index 31807d2a8b7..8404ee72555 100644 --- a/arch/arm/mach-imx/mm-imx3.c +++ b/arch/arm/mach-imx/mm-imx3.c @@ -34,31 +34,29 @@ static void imx3_idle(void) { unsigned long reg = 0; - if (!need_resched()) - __asm__ __volatile__( - /* disable I and D cache */ - "mrc p15, 0, %0, c1, c0, 0\n" - "bic %0, %0, #0x00001000\n" - "bic %0, %0, #0x00000004\n" - "mcr p15, 0, %0, c1, c0, 0\n" - /* invalidate I cache */ - "mov %0, #0\n" - "mcr p15, 0, %0, c7, c5, 0\n" - /* clear and invalidate D cache */ - "mov %0, #0\n" - "mcr p15, 0, %0, c7, c14, 0\n" - /* WFI */ - "mov %0, #0\n" - "mcr p15, 0, %0, c7, c0, 4\n" - "nop\n" "nop\n" "nop\n" "nop\n" - "nop\n" "nop\n" "nop\n" - /* enable I and D cache */ - "mrc p15, 0, %0, c1, c0, 0\n" - "orr %0, %0, #0x00001000\n" - "orr %0, %0, #0x00000004\n" - "mcr p15, 0, %0, c1, c0, 0\n" - : "=r" (reg)); - local_irq_enable(); + __asm__ __volatile__( + /* disable I and D cache */ + "mrc p15, 0, %0, c1, c0, 0\n" + "bic %0, %0, #0x00001000\n" + "bic %0, %0, #0x00000004\n" + "mcr p15, 0, %0, c1, c0, 0\n" + /* invalidate I cache */ + "mov %0, #0\n" + "mcr p15, 0, %0, c7, c5, 0\n" + /* clear and invalidate D cache */ + "mov %0, #0\n" + "mcr p15, 0, %0, c7, c14, 0\n" + /* WFI */ + "mov %0, #0\n" + "mcr p15, 0, %0, c7, c0, 4\n" + "nop\n" "nop\n" "nop\n" "nop\n" + "nop\n" "nop\n" "nop\n" + /* enable I and D cache */ + "mrc p15, 0, %0, c1, c0, 0\n" + "orr %0, %0, #0x00001000\n" + "orr %0, %0, #0x00000004\n" + "mcr p15, 0, %0, c1, c0, 0\n" + : "=r" (reg)); } static void __iomem *imx3_ioremap(unsigned long phys_addr, size_t size, @@ -134,8 +132,8 @@ void __init imx31_init_early(void) { mxc_set_cpu_type(MXC_CPU_MX31); mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR)); - pm_idle = imx3_idle; imx_ioremap = imx3_ioremap; + arm_pm_idle = imx3_idle; } void __init mx31_init_irq(void) @@ -197,7 +195,7 @@ void __init imx35_init_early(void) mxc_set_cpu_type(MXC_CPU_MX35); mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR)); mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR)); - pm_idle = imx3_idle; + arm_pm_idle = imx3_idle; imx_ioremap = imx3_ioremap; } diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c index bc17dfea381..49549a72dc7 100644 --- a/arch/arm/mach-imx/mm-imx5.c +++ b/arch/arm/mach-imx/mm-imx5.c @@ -26,23 +26,17 @@ static struct clk *gpc_dvfs_clk; static void imx5_idle(void) { - if (!need_resched()) { - /* gpc clock is needed for SRPG */ - if (gpc_dvfs_clk == NULL) { - gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs"); - if (IS_ERR(gpc_dvfs_clk)) - goto err0; - } - clk_enable(gpc_dvfs_clk); - mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF); - if (tzic_enable_wake()) - goto err1; - cpu_do_idle(); -err1: - clk_disable(gpc_dvfs_clk); + /* gpc clock is needed for SRPG */ + if (gpc_dvfs_clk == NULL) { + gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs"); + if (IS_ERR(gpc_dvfs_clk)) + return; } -err0: - local_irq_enable(); + clk_enable(gpc_dvfs_clk); + mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF); + if (tzic_enable_wake() != 0) + cpu_do_idle(); + clk_disable(gpc_dvfs_clk); } /* @@ -108,7 +102,7 @@ void __init imx51_init_early(void) mxc_set_cpu_type(MXC_CPU_MX51); mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR)); mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR)); - pm_idle = imx5_idle; + arm_pm_idle = imx5_idle; } void __init imx53_init_early(void) diff --git a/arch/arm/mach-imx/pm-imx27.c b/arch/arm/mach-imx/pm-imx27.c index e455d2f855b..6fcffa7db97 100644 --- a/arch/arm/mach-imx/pm-imx27.c +++ b/arch/arm/mach-imx/pm-imx27.c @@ -10,7 +10,6 @@ #include <linux/kernel.h> #include <linux/suspend.h> #include <linux/io.h> -#include <mach/system.h> #include <mach/hardware.h> static int mx27_suspend_enter(suspend_state_t state) @@ -23,7 +22,7 @@ static int mx27_suspend_enter(suspend_state_t state) cscr &= 0xFFFFFFFC; __raw_writel(cscr, MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR)); /* Executes WFI */ - arch_idle(); + cpu_do_idle(); break; default: diff --git a/arch/arm/mach-imx/pm-imx5.c b/arch/arm/mach-imx/pm-imx5.c index 6dc09344805..e26a9cb05ed 100644 --- a/arch/arm/mach-imx/pm-imx5.c +++ b/arch/arm/mach-imx/pm-imx5.c @@ -89,7 +89,7 @@ void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode) static int mx5_suspend_prepare(void) { - return clk_enable(gpc_dvfs_clk); + return clk_prepare_enable(gpc_dvfs_clk); } static int mx5_suspend_enter(suspend_state_t state) @@ -119,7 +119,7 @@ static int mx5_suspend_enter(suspend_state_t state) static void mx5_suspend_finish(void) { - clk_disable(gpc_dvfs_clk); + clk_disable_unprepare(gpc_dvfs_clk); } static int mx5_pm_valid(suspend_state_t state) diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c index 019f0ab08f6..15b87f26ac9 100644 --- a/arch/arm/mach-integrator/core.c +++ b/arch/arm/mach-integrator/core.c @@ -35,67 +35,23 @@ static struct amba_pl010_data integrator_uart_data; -static struct amba_device rtc_device = { - .dev = { - .init_name = "mb:15", - }, - .res = { - .start = INTEGRATOR_RTC_BASE, - .end = INTEGRATOR_RTC_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = { IRQ_RTCINT, NO_IRQ }, -}; +#define INTEGRATOR_RTC_IRQ { IRQ_RTCINT } +#define INTEGRATOR_UART0_IRQ { IRQ_UARTINT0 } +#define INTEGRATOR_UART1_IRQ { IRQ_UARTINT1 } +#define KMI0_IRQ { IRQ_KMIINT0 } +#define KMI1_IRQ { IRQ_KMIINT1 } -static struct amba_device uart0_device = { - .dev = { - .init_name = "mb:16", - .platform_data = &integrator_uart_data, - }, - .res = { - .start = INTEGRATOR_UART0_BASE, - .end = INTEGRATOR_UART0_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = { IRQ_UARTINT0, NO_IRQ }, -}; +static AMBA_APB_DEVICE(rtc, "mb:15", 0, + INTEGRATOR_RTC_BASE, INTEGRATOR_RTC_IRQ, NULL); -static struct amba_device uart1_device = { - .dev = { - .init_name = "mb:17", - .platform_data = &integrator_uart_data, - }, - .res = { - .start = INTEGRATOR_UART1_BASE, - .end = INTEGRATOR_UART1_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = { IRQ_UARTINT1, NO_IRQ }, -}; +static AMBA_APB_DEVICE(uart0, "mb:16", 0, + INTEGRATOR_UART0_BASE, INTEGRATOR_UART0_IRQ, &integrator_uart_data); -static struct amba_device kmi0_device = { - .dev = { - .init_name = "mb:18", - }, - .res = { - .start = KMI0_BASE, - .end = KMI0_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = { IRQ_KMIINT0, NO_IRQ }, -}; +static AMBA_APB_DEVICE(uart1, "mb:17", 0, + INTEGRATOR_UART1_BASE, INTEGRATOR_UART1_IRQ, &integrator_uart_data); -static struct amba_device kmi1_device = { - .dev = { - .init_name = "mb:19", - }, - .res = { - .start = KMI1_BASE, - .end = KMI1_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = { IRQ_KMIINT1, NO_IRQ }, -}; +static AMBA_APB_DEVICE(kmi0, "mb:18", 0, KMI0_BASE, KMI0_IRQ, NULL); +static AMBA_APB_DEVICE(kmi1, "mb:19", 0, KMI1_BASE, KMI1_IRQ, NULL); static struct amba_device *amba_devs[] __initdata = { &rtc_device, diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c index 8cbb75a96bd..3e538da6cb1 100644 --- a/arch/arm/mach-integrator/impd1.c +++ b/arch/arm/mach-integrator/impd1.c @@ -401,24 +401,21 @@ static int impd1_probe(struct lm_device *dev) pc_base = dev->resource.start + idev->offset; - d = kzalloc(sizeof(struct amba_device), GFP_KERNEL); + d = amba_device_alloc(NULL, pc_base, SZ_4K); if (!d) continue; dev_set_name(&d->dev, "lm%x:%5.5lx", dev->id, idev->offset >> 12); d->dev.parent = &dev->dev; - d->res.start = dev->resource.start + idev->offset; - d->res.end = d->res.start + SZ_4K - 1; - d->res.flags = IORESOURCE_MEM; d->irq[0] = dev->irq; d->irq[1] = dev->irq; d->periphid = idev->id; d->dev.platform_data = idev->platform_data; - ret = amba_device_register(d, &dev->resource); + ret = amba_device_add(d, &dev->resource); if (ret) { dev_err(&d->dev, "unable to register device: %d\n", ret); - kfree(d); + amba_device_put(d); } } diff --git a/arch/arm/mach-integrator/include/mach/system.h b/arch/arm/mach-integrator/include/mach/system.h deleted file mode 100644 index 901514eba4a..00000000000 --- a/arch/arm/mach-integrator/include/mach/system.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * arch/arm/mach-integrator/include/mach/system.h - * - * Copyright (C) 1999 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static inline void arch_idle(void) -{ - /* - * This should do all the clock switching - * and wait for interrupt tricks - */ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index a8b6aa6003f..be9ead4a3bc 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -347,32 +347,14 @@ static struct mmci_platform_data mmc_data = { .gpio_cd = -1, }; -static struct amba_device mmc_device = { - .dev = { - .init_name = "mb:1c", - .platform_data = &mmc_data, - }, - .res = { - .start = INTEGRATOR_CP_MMC_BASE, - .end = INTEGRATOR_CP_MMC_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = { IRQ_CP_MMCIINT0, IRQ_CP_MMCIINT1 }, - .periphid = 0, -}; +#define INTEGRATOR_CP_MMC_IRQS { IRQ_CP_MMCIINT0, IRQ_CP_MMCIINT1 } +#define INTEGRATOR_CP_AACI_IRQS { IRQ_CP_AACIINT } -static struct amba_device aaci_device = { - .dev = { - .init_name = "mb:1d", - }, - .res = { - .start = INTEGRATOR_CP_AACI_BASE, - .end = INTEGRATOR_CP_AACI_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = { IRQ_CP_AACIINT, NO_IRQ }, - .periphid = 0, -}; +static AMBA_APB_DEVICE(mmc, "mb:1c", 0, INTEGRATOR_CP_MMC_BASE, + INTEGRATOR_CP_MMC_IRQS, &mmc_data); + +static AMBA_APB_DEVICE(aaci, "mb:1d", 0, INTEGRATOR_CP_AACI_BASE, + INTEGRATOR_CP_AACI_IRQS, NULL); /* @@ -425,21 +407,8 @@ static struct clcd_board clcd_data = { .remove = versatile_clcd_remove_dma, }; -static struct amba_device clcd_device = { - .dev = { - .init_name = "mb:c0", - .coherent_dma_mask = ~0, - .platform_data = &clcd_data, - }, - .res = { - .start = INTCP_PA_CLCD_BASE, - .end = INTCP_PA_CLCD_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .dma_mask = ~0, - .irq = { IRQ_CP_CLCDCINT, NO_IRQ }, - .periphid = 0, -}; +static AMBA_AHB_DEVICE(clcd, "mb:c0", 0, INTCP_PA_CLCD_BASE, + { IRQ_CP_CLCDCINT }, &clcd_data); static struct amba_device *amba_devs[] __initdata = { &mmc_device, diff --git a/arch/arm/mach-iop13xx/include/mach/system.h b/arch/arm/mach-iop13xx/include/mach/system.h deleted file mode 100644 index 1f31ed3f8ae..00000000000 --- a/arch/arm/mach-iop13xx/include/mach/system.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * arch/arm/mach-iop13xx/include/mach/system.h - * - * Copyright (C) 2004 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -static inline void arch_idle(void) -{ - cpu_do_idle(); -} diff --git a/arch/arm/mach-iop32x/include/mach/system.h b/arch/arm/mach-iop32x/include/mach/system.h deleted file mode 100644 index 4a88727bca9..00000000000 --- a/arch/arm/mach-iop32x/include/mach/system.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * arch/arm/mach-iop32x/include/mach/system.h - * - * Copyright (C) 2001 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -static inline void arch_idle(void) -{ - cpu_do_idle(); -} diff --git a/arch/arm/mach-iop33x/include/mach/system.h b/arch/arm/mach-iop33x/include/mach/system.h deleted file mode 100644 index 4f98e765397..00000000000 --- a/arch/arm/mach-iop33x/include/mach/system.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * arch/arm/mach-iop33x/include/mach/system.h - * - * Copyright (C) 2001 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -static inline void arch_idle(void) -{ - cpu_do_idle(); -} diff --git a/arch/arm/mach-ixp2000/include/mach/system.h b/arch/arm/mach-ixp2000/include/mach/system.h deleted file mode 100644 index a7fb08b2b8e..00000000000 --- a/arch/arm/mach-ixp2000/include/mach/system.h +++ /dev/null @@ -1,14 +0,0 @@ -/* - * arch/arm/mach-ixp2000/include/mach/system.h - * - * Copyright (C) 2002 Intel Corp. - * Copyricht (C) 2003-2005 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -static inline void arch_idle(void) -{ - cpu_do_idle(); -} diff --git a/arch/arm/mach-ixp23xx/core.c b/arch/arm/mach-ixp23xx/core.c index 0923bb905cc..7c1495e4fe7 100644 --- a/arch/arm/mach-ixp23xx/core.c +++ b/arch/arm/mach-ixp23xx/core.c @@ -441,6 +441,9 @@ static struct platform_device *ixp23xx_devices[] __initdata = { void __init ixp23xx_sys_init(void) { + /* by default, the idle code is disabled */ + disable_hlt(); + *IXP23XX_EXP_UNIT_FUSE |= 0xf; platform_add_devices(ixp23xx_devices, ARRAY_SIZE(ixp23xx_devices)); } diff --git a/arch/arm/mach-ixp23xx/include/mach/system.h b/arch/arm/mach-ixp23xx/include/mach/system.h deleted file mode 100644 index 277dda7334b..00000000000 --- a/arch/arm/mach-ixp23xx/include/mach/system.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * arch/arm/mach-ixp23xx/include/mach/system.h - * - * Copyright (C) 2003 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -static inline void arch_idle(void) -{ -#if 0 - if (!hlt_counter) - cpu_do_idle(); -#endif -} diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index 3841ab4146b..a6329a0a8ec 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -236,6 +236,12 @@ void __init ixp4xx_init_irq(void) { int i = 0; + /* + * ixp4xx does not implement the XScale PWRMODE register + * so it must not call cpu_do_idle(). + */ + disable_hlt(); + /* Route all sources to IRQ instead of FIQ */ *IXP4XX_ICLR = 0x0; diff --git a/arch/arm/mach-ixp4xx/include/mach/system.h b/arch/arm/mach-ixp4xx/include/mach/system.h deleted file mode 100644 index 140a9bef446..00000000000 --- a/arch/arm/mach-ixp4xx/include/mach/system.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-ixp4xx/include/mach/system.h - * - * Copyright (C) 2002 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ -static inline void arch_idle(void) -{ - /* ixp4xx does not implement the XScale PWRMODE register, - * so it must not call cpu_do_idle() here. - */ -#if 0 - cpu_do_idle(); -#endif -} diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index cc15426787b..77d4852e19f 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -27,6 +27,7 @@ #include <plat/cache-feroceon-l2.h> #include <plat/mvsdio.h> #include <plat/orion_nand.h> +#include <plat/ehci-orion.h> #include <plat/common.h> #include <plat/time.h> #include <plat/addr-map.h> @@ -73,7 +74,7 @@ unsigned int kirkwood_clk_ctrl = CGC_DUNIT | CGC_RESERVED; void __init kirkwood_ehci_init(void) { kirkwood_clk_ctrl |= CGC_USB0; - orion_ehci_init(USB_PHYS_BASE, IRQ_KIRKWOOD_USB); + orion_ehci_init(USB_PHYS_BASE, IRQ_KIRKWOOD_USB, EHCI_PHY_NA); } diff --git a/arch/arm/mach-kirkwood/include/mach/system.h b/arch/arm/mach-kirkwood/include/mach/system.h deleted file mode 100644 index 5fddde002b5..00000000000 --- a/arch/arm/mach-kirkwood/include/mach/system.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * arch/arm/mach-kirkwood/include/mach/system.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/mach-kirkwood/mpp.h b/arch/arm/mach-kirkwood/mpp.h index e8fda45c073..d5a0d1da2e0 100644 --- a/arch/arm/mach-kirkwood/mpp.h +++ b/arch/arm/mach-kirkwood/mpp.h @@ -31,314 +31,314 @@ #define MPP_F6282_MASK MPP( 0, 0x0, 0, 0, 0, 0, 0, 0, 1 ) #define MPP0_GPIO MPP( 0, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP0_NF_IO2 MPP( 0, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP0_SPI_SCn MPP( 0, 0x2, 0, 1, 1, 1, 1, 1, 1 ) +#define MPP0_NF_IO2 MPP( 0, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP0_SPI_SCn MPP( 0, 0x2, 0, 0, 1, 1, 1, 1, 1 ) #define MPP1_GPO MPP( 1, 0x0, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP1_NF_IO3 MPP( 1, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP1_SPI_MOSI MPP( 1, 0x2, 0, 1, 1, 1, 1, 1, 1 ) +#define MPP1_NF_IO3 MPP( 1, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP1_SPI_MOSI MPP( 1, 0x2, 0, 0, 1, 1, 1, 1, 1 ) #define MPP2_GPO MPP( 2, 0x0, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP2_NF_IO4 MPP( 2, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP2_SPI_SCK MPP( 2, 0x2, 0, 1, 1, 1, 1, 1, 1 ) +#define MPP2_NF_IO4 MPP( 2, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP2_SPI_SCK MPP( 2, 0x2, 0, 0, 1, 1, 1, 1, 1 ) #define MPP3_GPO MPP( 3, 0x0, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP3_NF_IO5 MPP( 3, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP3_SPI_MISO MPP( 3, 0x2, 1, 0, 1, 1, 1, 1, 1 ) +#define MPP3_NF_IO5 MPP( 3, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP3_SPI_MISO MPP( 3, 0x2, 0, 0, 1, 1, 1, 1, 1 ) #define MPP4_GPIO MPP( 4, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP4_NF_IO6 MPP( 4, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP4_UART0_RXD MPP( 4, 0x2, 1, 0, 1, 1, 1, 1, 1 ) -#define MPP4_SATA1_ACTn MPP( 4, 0x5, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP4_NF_IO6 MPP( 4, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP4_UART0_RXD MPP( 4, 0x2, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP4_SATA1_ACTn MPP( 4, 0x5, 0, 0, 0, 0, 1, 1, 1 ) #define MPP4_LCD_VGA_HSYNC MPP( 4, 0xb, 0, 0, 0, 0, 0, 0, 1 ) -#define MPP4_PTP_CLK MPP( 4, 0xd, 1, 0, 1, 1, 1, 1, 0 ) +#define MPP4_PTP_CLK MPP( 4, 0xd, 0, 0, 1, 1, 1, 1, 0 ) #define MPP5_GPO MPP( 5, 0x0, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP5_NF_IO7 MPP( 5, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP5_UART0_TXD MPP( 5, 0x2, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP5_PTP_TRIG_GEN MPP( 5, 0x4, 0, 1, 1, 1, 1, 1, 0 ) -#define MPP5_SATA0_ACTn MPP( 5, 0x5, 0, 1, 0, 1, 1, 1, 1 ) +#define MPP5_NF_IO7 MPP( 5, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP5_UART0_TXD MPP( 5, 0x2, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP5_PTP_TRIG_GEN MPP( 5, 0x4, 0, 0, 1, 1, 1, 1, 0 ) +#define MPP5_SATA0_ACTn MPP( 5, 0x5, 0, 0, 0, 1, 1, 1, 1 ) #define MPP5_LCD_VGA_VSYNC MPP( 5, 0xb, 0, 0, 0, 0, 0, 0, 1 ) -#define MPP6_SYSRST_OUTn MPP( 6, 0x1, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP6_SPI_MOSI MPP( 6, 0x2, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP6_PTP_TRIG_GEN MPP( 6, 0x3, 0, 1, 1, 1, 1, 1, 0 ) +#define MPP6_SYSRST_OUTn MPP( 6, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP6_SPI_MOSI MPP( 6, 0x2, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP6_PTP_TRIG_GEN MPP( 6, 0x3, 0, 0, 1, 1, 1, 1, 0 ) #define MPP7_GPO MPP( 7, 0x0, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP7_PEX_RST_OUTn MPP( 7, 0x1, 0, 1, 1, 1, 1, 1, 0 ) -#define MPP7_SPI_SCn MPP( 7, 0x2, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP7_PTP_TRIG_GEN MPP( 7, 0x3, 0, 1, 1, 1, 1, 1, 0 ) -#define MPP7_LCD_PWM MPP( 7, 0xb, 0, 1, 0, 0, 0, 0, 1 ) +#define MPP7_PEX_RST_OUTn MPP( 7, 0x1, 0, 0, 1, 1, 1, 1, 0 ) +#define MPP7_SPI_SCn MPP( 7, 0x2, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP7_PTP_TRIG_GEN MPP( 7, 0x3, 0, 0, 1, 1, 1, 1, 0 ) +#define MPP7_LCD_PWM MPP( 7, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP8_GPIO MPP( 8, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP8_TW0_SDA MPP( 8, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP8_UART0_RTS MPP( 8, 0x2, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP8_UART1_RTS MPP( 8, 0x3, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP8_MII0_RXERR MPP( 8, 0x4, 1, 0, 0, 1, 1, 1, 1 ) -#define MPP8_SATA1_PRESENTn MPP( 8, 0x5, 0, 1, 0, 0, 1, 1, 1 ) -#define MPP8_PTP_CLK MPP( 8, 0xc, 1, 0, 1, 1, 1, 1, 0 ) -#define MPP8_MII0_COL MPP( 8, 0xd, 1, 0, 1, 1, 1, 1, 1 ) +#define MPP8_TW0_SDA MPP( 8, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP8_UART0_RTS MPP( 8, 0x2, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP8_UART1_RTS MPP( 8, 0x3, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP8_MII0_RXERR MPP( 8, 0x4, 0, 0, 0, 1, 1, 1, 1 ) +#define MPP8_SATA1_PRESENTn MPP( 8, 0x5, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP8_PTP_CLK MPP( 8, 0xc, 0, 0, 1, 1, 1, 1, 0 ) +#define MPP8_MII0_COL MPP( 8, 0xd, 0, 0, 1, 1, 1, 1, 1 ) #define MPP9_GPIO MPP( 9, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP9_TW0_SCK MPP( 9, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP9_UART0_CTS MPP( 9, 0x2, 1, 0, 1, 1, 1, 1, 1 ) -#define MPP9_UART1_CTS MPP( 9, 0x3, 1, 0, 1, 1, 1, 1, 1 ) -#define MPP9_SATA0_PRESENTn MPP( 9, 0x5, 0, 1, 0, 1, 1, 1, 1 ) -#define MPP9_PTP_EVENT_REQ MPP( 9, 0xc, 1, 0, 1, 1, 1, 1, 0 ) -#define MPP9_MII0_CRS MPP( 9, 0xd, 1, 0, 1, 1, 1, 1, 1 ) +#define MPP9_TW0_SCK MPP( 9, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP9_UART0_CTS MPP( 9, 0x2, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP9_UART1_CTS MPP( 9, 0x3, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP9_SATA0_PRESENTn MPP( 9, 0x5, 0, 0, 0, 1, 1, 1, 1 ) +#define MPP9_PTP_EVENT_REQ MPP( 9, 0xc, 0, 0, 1, 1, 1, 1, 0 ) +#define MPP9_MII0_CRS MPP( 9, 0xd, 0, 0, 1, 1, 1, 1, 1 ) #define MPP10_GPO MPP( 10, 0x0, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP10_SPI_SCK MPP( 10, 0x2, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP10_UART0_TXD MPP( 10, 0X3, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP10_SATA1_ACTn MPP( 10, 0x5, 0, 1, 0, 0, 1, 1, 1 ) -#define MPP10_PTP_TRIG_GEN MPP( 10, 0xc, 0, 1, 1, 1, 1, 1, 0 ) +#define MPP10_SPI_SCK MPP( 10, 0x2, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP10_UART0_TXD MPP( 10, 0X3, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP10_SATA1_ACTn MPP( 10, 0x5, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP10_PTP_TRIG_GEN MPP( 10, 0xc, 0, 0, 1, 1, 1, 1, 0 ) #define MPP11_GPIO MPP( 11, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP11_SPI_MISO MPP( 11, 0x2, 1, 0, 1, 1, 1, 1, 1 ) -#define MPP11_UART0_RXD MPP( 11, 0x3, 1, 0, 1, 1, 1, 1, 1 ) -#define MPP11_PTP_EVENT_REQ MPP( 11, 0x4, 1, 0, 1, 1, 1, 1, 0 ) -#define MPP11_PTP_TRIG_GEN MPP( 11, 0xc, 0, 1, 1, 1, 1, 1, 0 ) -#define MPP11_PTP_CLK MPP( 11, 0xd, 1, 0, 1, 1, 1, 1, 0 ) -#define MPP11_SATA0_ACTn MPP( 11, 0x5, 0, 1, 0, 1, 1, 1, 1 ) +#define MPP11_SPI_MISO MPP( 11, 0x2, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP11_UART0_RXD MPP( 11, 0x3, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP11_PTP_EVENT_REQ MPP( 11, 0x4, 0, 0, 1, 1, 1, 1, 0 ) +#define MPP11_PTP_TRIG_GEN MPP( 11, 0xc, 0, 0, 1, 1, 1, 1, 0 ) +#define MPP11_PTP_CLK MPP( 11, 0xd, 0, 0, 1, 1, 1, 1, 0 ) +#define MPP11_SATA0_ACTn MPP( 11, 0x5, 0, 0, 0, 1, 1, 1, 1 ) #define MPP12_GPO MPP( 12, 0x0, 0, 1, 1, 1, 1, 1, 1 ) #define MPP12_GPIO MPP( 12, 0x0, 1, 1, 0, 0, 0, 1, 0 ) -#define MPP12_SD_CLK MPP( 12, 0x1, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP12_AU_SPDIF0 MPP( 12, 0xa, 0, 1, 0, 0, 0, 0, 1 ) -#define MPP12_SPI_MOSI MPP( 12, 0xb, 0, 1, 0, 0, 0, 0, 1 ) -#define MPP12_TW1_SDA MPP( 12, 0xd, 1, 0, 0, 0, 0, 0, 1 ) +#define MPP12_SD_CLK MPP( 12, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP12_AU_SPDIF0 MPP( 12, 0xa, 0, 0, 0, 0, 0, 0, 1 ) +#define MPP12_SPI_MOSI MPP( 12, 0xb, 0, 0, 0, 0, 0, 0, 1 ) +#define MPP12_TW1_SDA MPP( 12, 0xd, 0, 0, 0, 0, 0, 0, 1 ) #define MPP13_GPIO MPP( 13, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP13_SD_CMD MPP( 13, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP13_UART1_TXD MPP( 13, 0x3, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP13_AU_SPDIFRMCLK MPP( 13, 0xa, 0, 1, 0, 0, 0, 0, 1 ) -#define MPP13_LCDPWM MPP( 13, 0xb, 0, 1, 0, 0, 0, 0, 1 ) +#define MPP13_SD_CMD MPP( 13, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP13_UART1_TXD MPP( 13, 0x3, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP13_AU_SPDIFRMCLK MPP( 13, 0xa, 0, 0, 0, 0, 0, 0, 1 ) +#define MPP13_LCDPWM MPP( 13, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP14_GPIO MPP( 14, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP14_SD_D0 MPP( 14, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP14_UART1_RXD MPP( 14, 0x3, 1, 0, 1, 1, 1, 1, 1 ) -#define MPP14_SATA1_PRESENTn MPP( 14, 0x4, 0, 1, 0, 0, 1, 1, 1 ) -#define MPP14_AU_SPDIFI MPP( 14, 0xa, 1, 0, 0, 0, 0, 0, 1 ) -#define MPP14_AU_I2SDI MPP( 14, 0xb, 1, 0, 0, 0, 0, 0, 1 ) -#define MPP14_MII0_COL MPP( 14, 0xd, 1, 0, 1, 1, 1, 1, 1 ) +#define MPP14_SD_D0 MPP( 14, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP14_UART1_RXD MPP( 14, 0x3, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP14_SATA1_PRESENTn MPP( 14, 0x4, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP14_AU_SPDIFI MPP( 14, 0xa, 0, 0, 0, 0, 0, 0, 1 ) +#define MPP14_AU_I2SDI MPP( 14, 0xb, 0, 0, 0, 0, 0, 0, 1 ) +#define MPP14_MII0_COL MPP( 14, 0xd, 0, 0, 1, 1, 1, 1, 1 ) #define MPP15_GPIO MPP( 15, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP15_SD_D1 MPP( 15, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP15_UART0_RTS MPP( 15, 0x2, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP15_UART1_TXD MPP( 15, 0x3, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP15_SATA0_ACTn MPP( 15, 0x4, 0, 1, 0, 1, 1, 1, 1 ) -#define MPP15_SPI_CSn MPP( 15, 0xb, 0, 1, 0, 0, 0, 0, 1 ) +#define MPP15_SD_D1 MPP( 15, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP15_UART0_RTS MPP( 15, 0x2, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP15_UART1_TXD MPP( 15, 0x3, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP15_SATA0_ACTn MPP( 15, 0x4, 0, 0, 0, 1, 1, 1, 1 ) +#define MPP15_SPI_CSn MPP( 15, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP16_GPIO MPP( 16, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP16_SD_D2 MPP( 16, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP16_UART0_CTS MPP( 16, 0x2, 1, 0, 1, 1, 1, 1, 1 ) -#define MPP16_UART1_RXD MPP( 16, 0x3, 1, 0, 1, 1, 1, 1, 1 ) -#define MPP16_SATA1_ACTn MPP( 16, 0x4, 0, 1, 0, 0, 1, 1, 1 ) -#define MPP16_LCD_EXT_REF_CLK MPP( 16, 0xb, 1, 0, 0, 0, 0, 0, 1 ) -#define MPP16_MII0_CRS MPP( 16, 0xd, 1, 0, 1, 1, 1, 1, 1 ) +#define MPP16_SD_D2 MPP( 16, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP16_UART0_CTS MPP( 16, 0x2, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP16_UART1_RXD MPP( 16, 0x3, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP16_SATA1_ACTn MPP( 16, 0x4, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP16_LCD_EXT_REF_CLK MPP( 16, 0xb, 0, 0, 0, 0, 0, 0, 1 ) +#define MPP16_MII0_CRS MPP( 16, 0xd, 0, 0, 1, 1, 1, 1, 1 ) #define MPP17_GPIO MPP( 17, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP17_SD_D3 MPP( 17, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP17_SATA0_PRESENTn MPP( 17, 0x4, 0, 1, 0, 1, 1, 1, 1 ) -#define MPP17_SATA1_ACTn MPP( 17, 0xa, 0, 1, 0, 0, 0, 0, 1 ) -#define MPP17_TW1_SCK MPP( 17, 0xd, 1, 1, 0, 0, 0, 0, 1 ) +#define MPP17_SD_D3 MPP( 17, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP17_SATA0_PRESENTn MPP( 17, 0x4, 0, 0, 0, 1, 1, 1, 1 ) +#define MPP17_SATA1_ACTn MPP( 17, 0xa, 0, 0, 0, 0, 0, 0, 1 ) +#define MPP17_TW1_SCK MPP( 17, 0xd, 0, 0, 0, 0, 0, 0, 1 ) #define MPP18_GPO MPP( 18, 0x0, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP18_NF_IO0 MPP( 18, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP18_PEX0_CLKREQ MPP( 18, 0x2, 0, 1, 0, 0, 0, 0, 1 ) +#define MPP18_NF_IO0 MPP( 18, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP18_PEX0_CLKREQ MPP( 18, 0x2, 0, 0, 0, 0, 0, 0, 1 ) #define MPP19_GPO MPP( 19, 0x0, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP19_NF_IO1 MPP( 19, 0x1, 1, 1, 1, 1, 1, 1, 1 ) +#define MPP19_NF_IO1 MPP( 19, 0x1, 0, 0, 1, 1, 1, 1, 1 ) #define MPP20_GPIO MPP( 20, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP20_TSMP0 MPP( 20, 0x1, 1, 1, 0, 0, 1, 1, 1 ) -#define MPP20_TDM_CH0_TX_QL MPP( 20, 0x2, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP20_TSMP0 MPP( 20, 0x1, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP20_TDM_CH0_TX_QL MPP( 20, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP20_GE1_TXD0 MPP( 20, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP20_AU_SPDIFI MPP( 20, 0x4, 1, 0, 0, 0, 1, 1, 1 ) -#define MPP20_SATA1_ACTn MPP( 20, 0x5, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP20_AU_SPDIFI MPP( 20, 0x4, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP20_SATA1_ACTn MPP( 20, 0x5, 0, 0, 0, 0, 1, 1, 1 ) #define MPP20_LCD_D0 MPP( 20, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP21_GPIO MPP( 21, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP21_TSMP1 MPP( 21, 0x1, 1, 1, 0, 0, 1, 1, 1 ) -#define MPP21_TDM_CH0_RX_QL MPP( 21, 0x2, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP21_TSMP1 MPP( 21, 0x1, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP21_TDM_CH0_RX_QL MPP( 21, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP21_GE1_TXD1 MPP( 21, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP21_AU_SPDIFO MPP( 21, 0x4, 0, 1, 0, 0, 1, 1, 1 ) -#define MPP21_SATA0_ACTn MPP( 21, 0x5, 0, 1, 0, 1, 1, 1, 1 ) +#define MPP21_AU_SPDIFO MPP( 21, 0x4, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP21_SATA0_ACTn MPP( 21, 0x5, 0, 0, 0, 1, 1, 1, 1 ) #define MPP21_LCD_D1 MPP( 21, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP22_GPIO MPP( 22, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP22_TSMP2 MPP( 22, 0x1, 1, 1, 0, 0, 1, 1, 1 ) -#define MPP22_TDM_CH2_TX_QL MPP( 22, 0x2, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP22_TSMP2 MPP( 22, 0x1, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP22_TDM_CH2_TX_QL MPP( 22, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP22_GE1_TXD2 MPP( 22, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP22_AU_SPDIFRMKCLK MPP( 22, 0x4, 0, 1, 0, 0, 1, 1, 1 ) -#define MPP22_SATA1_PRESENTn MPP( 22, 0x5, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP22_AU_SPDIFRMKCLK MPP( 22, 0x4, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP22_SATA1_PRESENTn MPP( 22, 0x5, 0, 0, 0, 0, 1, 1, 1 ) #define MPP22_LCD_D2 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP23_GPIO MPP( 23, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP23_TSMP3 MPP( 23, 0x1, 1, 1, 0, 0, 1, 1, 1 ) -#define MPP23_TDM_CH2_RX_QL MPP( 23, 0x2, 1, 0, 0, 0, 1, 1, 1 ) +#define MPP23_TSMP3 MPP( 23, 0x1, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP23_TDM_CH2_RX_QL MPP( 23, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP23_GE1_TXD3 MPP( 23, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP23_AU_I2SBCLK MPP( 23, 0x4, 0, 1, 0, 0, 1, 1, 1 ) -#define MPP23_SATA0_PRESENTn MPP( 23, 0x5, 0, 1, 0, 1, 1, 1, 1 ) +#define MPP23_AU_I2SBCLK MPP( 23, 0x4, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP23_SATA0_PRESENTn MPP( 23, 0x5, 0, 0, 0, 1, 1, 1, 1 ) #define MPP23_LCD_D3 MPP( 23, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP24_GPIO MPP( 24, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP24_TSMP4 MPP( 24, 0x1, 1, 1, 0, 0, 1, 1, 1 ) -#define MPP24_TDM_SPI_CS0 MPP( 24, 0x2, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP24_TSMP4 MPP( 24, 0x1, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP24_TDM_SPI_CS0 MPP( 24, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP24_GE1_RXD0 MPP( 24, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP24_AU_I2SDO MPP( 24, 0x4, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP24_AU_I2SDO MPP( 24, 0x4, 0, 0, 0, 0, 1, 1, 1 ) #define MPP24_LCD_D4 MPP( 24, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP25_GPIO MPP( 25, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP25_TSMP5 MPP( 25, 0x1, 1, 1, 0, 0, 1, 1, 1 ) -#define MPP25_TDM_SPI_SCK MPP( 25, 0x2, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP25_TSMP5 MPP( 25, 0x1, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP25_TDM_SPI_SCK MPP( 25, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP25_GE1_RXD1 MPP( 25, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP25_AU_I2SLRCLK MPP( 25, 0x4, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP25_AU_I2SLRCLK MPP( 25, 0x4, 0, 0, 0, 0, 1, 1, 1 ) #define MPP25_LCD_D5 MPP( 25, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP26_GPIO MPP( 26, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP26_TSMP6 MPP( 26, 0x1, 1, 1, 0, 0, 1, 1, 1 ) -#define MPP26_TDM_SPI_MISO MPP( 26, 0x2, 1, 0, 0, 0, 1, 1, 1 ) +#define MPP26_TSMP6 MPP( 26, 0x1, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP26_TDM_SPI_MISO MPP( 26, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP26_GE1_RXD2 MPP( 26, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP26_AU_I2SMCLK MPP( 26, 0x4, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP26_AU_I2SMCLK MPP( 26, 0x4, 0, 0, 0, 0, 1, 1, 1 ) #define MPP26_LCD_D6 MPP( 26, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP27_GPIO MPP( 27, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP27_TSMP7 MPP( 27, 0x1, 1, 1, 0, 0, 1, 1, 1 ) -#define MPP27_TDM_SPI_MOSI MPP( 27, 0x2, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP27_TSMP7 MPP( 27, 0x1, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP27_TDM_SPI_MOSI MPP( 27, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP27_GE1_RXD3 MPP( 27, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP27_AU_I2SDI MPP( 27, 0x4, 1, 0, 0, 0, 1, 1, 1 ) +#define MPP27_AU_I2SDI MPP( 27, 0x4, 0, 0, 0, 0, 1, 1, 1 ) #define MPP27_LCD_D7 MPP( 27, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP28_GPIO MPP( 28, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP28_TSMP8 MPP( 28, 0x1, 1, 1, 0, 0, 1, 1, 1 ) +#define MPP28_TSMP8 MPP( 28, 0x1, 0, 0, 0, 0, 1, 1, 1 ) #define MPP28_TDM_CODEC_INTn MPP( 28, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP28_GE1_COL MPP( 28, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP28_AU_EXTCLK MPP( 28, 0x4, 1, 0, 0, 0, 1, 1, 1 ) +#define MPP28_AU_EXTCLK MPP( 28, 0x4, 0, 0, 0, 0, 1, 1, 1 ) #define MPP28_LCD_D8 MPP( 28, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP29_GPIO MPP( 29, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP29_TSMP9 MPP( 29, 0x1, 1, 1, 0, 0, 1, 1, 1 ) +#define MPP29_TSMP9 MPP( 29, 0x1, 0, 0, 0, 0, 1, 1, 1 ) #define MPP29_TDM_CODEC_RSTn MPP( 29, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP29_GE1_TCLK MPP( 29, 0x3, 0, 0, 0, 1, 1, 1, 1 ) #define MPP29_LCD_D9 MPP( 29, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP30_GPIO MPP( 30, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP30_TSMP10 MPP( 30, 0x1, 1, 1, 0, 0, 1, 1, 1 ) -#define MPP30_TDM_PCLK MPP( 30, 0x2, 1, 1, 0, 0, 1, 1, 1 ) +#define MPP30_TSMP10 MPP( 30, 0x1, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP30_TDM_PCLK MPP( 30, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP30_GE1_RXCTL MPP( 30, 0x3, 0, 0, 0, 1, 1, 1, 1 ) #define MPP30_LCD_D10 MPP( 30, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP31_GPIO MPP( 31, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP31_TSMP11 MPP( 31, 0x1, 1, 1, 0, 0, 1, 1, 1 ) -#define MPP31_TDM_FS MPP( 31, 0x2, 1, 1, 0, 0, 1, 1, 1 ) +#define MPP31_TSMP11 MPP( 31, 0x1, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP31_TDM_FS MPP( 31, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP31_GE1_RXCLK MPP( 31, 0x3, 0, 0, 0, 1, 1, 1, 1 ) #define MPP31_LCD_D11 MPP( 31, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP32_GPIO MPP( 32, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP32_TSMP12 MPP( 32, 0x1, 1, 1, 0, 0, 1, 1, 1 ) -#define MPP32_TDM_DRX MPP( 32, 0x2, 1, 0, 0, 0, 1, 1, 1 ) +#define MPP32_TSMP12 MPP( 32, 0x1, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP32_TDM_DRX MPP( 32, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP32_GE1_TCLKOUT MPP( 32, 0x3, 0, 0, 0, 1, 1, 1, 1 ) #define MPP32_LCD_D12 MPP( 32, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP33_GPO MPP( 33, 0x0, 0, 1, 0, 1, 1, 1, 1 ) -#define MPP33_TDM_DTX MPP( 33, 0x2, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP33_TDM_DTX MPP( 33, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP33_GE1_TXCTL MPP( 33, 0x3, 0, 0, 0, 1, 1, 1, 1 ) #define MPP33_LCD_D13 MPP( 33, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP34_GPIO MPP( 34, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP34_TDM_SPI_CS1 MPP( 34, 0x2, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP34_TDM_SPI_CS1 MPP( 34, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP34_GE1_TXEN MPP( 34, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP34_SATA1_ACTn MPP( 34, 0x5, 0, 1, 0, 0, 0, 1, 1 ) +#define MPP34_SATA1_ACTn MPP( 34, 0x5, 0, 0, 0, 0, 0, 1, 1 ) #define MPP34_LCD_D14 MPP( 34, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP35_GPIO MPP( 35, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP35_TDM_CH0_TX_QL MPP( 35, 0x2, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP35_TDM_CH0_TX_QL MPP( 35, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP35_GE1_RXERR MPP( 35, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP35_SATA0_ACTn MPP( 35, 0x5, 0, 1, 0, 1, 1, 1, 1 ) +#define MPP35_SATA0_ACTn MPP( 35, 0x5, 0, 0, 0, 1, 1, 1, 1 ) #define MPP35_LCD_D15 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 ) -#define MPP35_MII0_RXERR MPP( 35, 0xc, 1, 0, 1, 1, 1, 1, 1 ) +#define MPP35_MII0_RXERR MPP( 35, 0xc, 0, 0, 1, 1, 1, 1, 1 ) #define MPP36_GPIO MPP( 36, 0x0, 1, 1, 1, 0, 0, 1, 1 ) -#define MPP36_TSMP0 MPP( 36, 0x1, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP36_TDM_SPI_CS1 MPP( 36, 0x2, 0, 1, 0, 0, 0, 1, 1 ) -#define MPP36_AU_SPDIFI MPP( 36, 0x4, 1, 0, 1, 0, 0, 1, 1 ) -#define MPP36_TW1_SDA MPP( 36, 0xb, 1, 1, 0, 0, 0, 0, 1 ) +#define MPP36_TSMP0 MPP( 36, 0x1, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP36_TDM_SPI_CS1 MPP( 36, 0x2, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP36_AU_SPDIFI MPP( 36, 0x4, 0, 0, 1, 0, 0, 1, 1 ) +#define MPP36_TW1_SDA MPP( 36, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP37_GPIO MPP( 37, 0x0, 1, 1, 1, 0, 0, 1, 1 ) -#define MPP37_TSMP1 MPP( 37, 0x1, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP37_TDM_CH2_TX_QL MPP( 37, 0x2, 0, 1, 0, 0, 0, 1, 1 ) -#define MPP37_AU_SPDIFO MPP( 37, 0x4, 0, 1, 1, 0, 0, 1, 1 ) -#define MPP37_TW1_SCK MPP( 37, 0xb, 1, 1, 0, 0, 0, 0, 1 ) +#define MPP37_TSMP1 MPP( 37, 0x1, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP37_TDM_CH2_TX_QL MPP( 37, 0x2, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP37_AU_SPDIFO MPP( 37, 0x4, 0, 0, 1, 0, 0, 1, 1 ) +#define MPP37_TW1_SCK MPP( 37, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP38_GPIO MPP( 38, 0x0, 1, 1, 1, 0, 0, 1, 1 ) -#define MPP38_TSMP2 MPP( 38, 0x1, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP38_TDM_CH2_RX_QL MPP( 38, 0x2, 0, 1, 0, 0, 0, 1, 1 ) -#define MPP38_AU_SPDIFRMLCLK MPP( 38, 0x4, 0, 1, 1, 0, 0, 1, 1 ) +#define MPP38_TSMP2 MPP( 38, 0x1, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP38_TDM_CH2_RX_QL MPP( 38, 0x2, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP38_AU_SPDIFRMLCLK MPP( 38, 0x4, 0, 0, 1, 0, 0, 1, 1 ) #define MPP38_LCD_D18 MPP( 38, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP39_GPIO MPP( 39, 0x0, 1, 1, 1, 0, 0, 1, 1 ) -#define MPP39_TSMP3 MPP( 39, 0x1, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP39_TDM_SPI_CS0 MPP( 39, 0x2, 0, 1, 0, 0, 0, 1, 1 ) -#define MPP39_AU_I2SBCLK MPP( 39, 0x4, 0, 1, 1, 0, 0, 1, 1 ) +#define MPP39_TSMP3 MPP( 39, 0x1, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP39_TDM_SPI_CS0 MPP( 39, 0x2, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP39_AU_I2SBCLK MPP( 39, 0x4, 0, 0, 1, 0, 0, 1, 1 ) #define MPP39_LCD_D19 MPP( 39, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP40_GPIO MPP( 40, 0x0, 1, 1, 1, 0, 0, 1, 1 ) -#define MPP40_TSMP4 MPP( 40, 0x1, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP40_TDM_SPI_SCK MPP( 40, 0x2, 0, 1, 0, 0, 0, 1, 1 ) -#define MPP40_AU_I2SDO MPP( 40, 0x4, 0, 1, 1, 0, 0, 1, 1 ) +#define MPP40_TSMP4 MPP( 40, 0x1, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP40_TDM_SPI_SCK MPP( 40, 0x2, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP40_AU_I2SDO MPP( 40, 0x4, 0, 0, 1, 0, 0, 1, 1 ) #define MPP40_LCD_D20 MPP( 40, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP41_GPIO MPP( 41, 0x0, 1, 1, 1, 0, 0, 1, 1 ) -#define MPP41_TSMP5 MPP( 41, 0x1, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP41_TDM_SPI_MISO MPP( 41, 0x2, 1, 0, 0, 0, 0, 1, 1 ) -#define MPP41_AU_I2SLRCLK MPP( 41, 0x4, 0, 1, 1, 0, 0, 1, 1 ) +#define MPP41_TSMP5 MPP( 41, 0x1, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP41_TDM_SPI_MISO MPP( 41, 0x2, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP41_AU_I2SLRCLK MPP( 41, 0x4, 0, 0, 1, 0, 0, 1, 1 ) #define MPP41_LCD_D21 MPP( 41, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP42_GPIO MPP( 42, 0x0, 1, 1, 1, 0, 0, 1, 1 ) -#define MPP42_TSMP6 MPP( 42, 0x1, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP42_TDM_SPI_MOSI MPP( 42, 0x2, 0, 1, 0, 0, 0, 1, 1 ) -#define MPP42_AU_I2SMCLK MPP( 42, 0x4, 0, 1, 1, 0, 0, 1, 1 ) +#define MPP42_TSMP6 MPP( 42, 0x1, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP42_TDM_SPI_MOSI MPP( 42, 0x2, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP42_AU_I2SMCLK MPP( 42, 0x4, 0, 0, 1, 0, 0, 1, 1 ) #define MPP42_LCD_D22 MPP( 42, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP43_GPIO MPP( 43, 0x0, 1, 1, 1, 0, 0, 1, 1 ) -#define MPP43_TSMP7 MPP( 43, 0x1, 1, 1, 0, 0, 0, 1, 1 ) +#define MPP43_TSMP7 MPP( 43, 0x1, 0, 0, 0, 0, 0, 1, 1 ) #define MPP43_TDM_CODEC_INTn MPP( 43, 0x2, 0, 0, 0, 0, 0, 1, 1 ) -#define MPP43_AU_I2SDI MPP( 43, 0x4, 1, 0, 1, 0, 0, 1, 1 ) +#define MPP43_AU_I2SDI MPP( 43, 0x4, 0, 0, 1, 0, 0, 1, 1 ) #define MPP43_LCD_D23 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP44_GPIO MPP( 44, 0x0, 1, 1, 1, 0, 0, 1, 1 ) -#define MPP44_TSMP8 MPP( 44, 0x1, 1, 1, 0, 0, 0, 1, 1 ) +#define MPP44_TSMP8 MPP( 44, 0x1, 0, 0, 0, 0, 0, 1, 1 ) #define MPP44_TDM_CODEC_RSTn MPP( 44, 0x2, 0, 0, 0, 0, 0, 1, 1 ) -#define MPP44_AU_EXTCLK MPP( 44, 0x4, 1, 0, 1, 0, 0, 1, 1 ) +#define MPP44_AU_EXTCLK MPP( 44, 0x4, 0, 0, 1, 0, 0, 1, 1 ) #define MPP44_LCD_CLK MPP( 44, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP45_GPIO MPP( 45, 0x0, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP45_TSMP9 MPP( 45, 0x1, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP45_TDM_PCLK MPP( 45, 0x2, 1, 1, 0, 0, 0, 1, 1 ) +#define MPP45_TSMP9 MPP( 45, 0x1, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP45_TDM_PCLK MPP( 45, 0x2, 0, 0, 0, 0, 0, 1, 1 ) #define MPP245_LCD_E MPP( 45, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP46_GPIO MPP( 46, 0x0, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP46_TSMP10 MPP( 46, 0x1, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP46_TDM_FS MPP( 46, 0x2, 1, 1, 0, 0, 0, 1, 1 ) +#define MPP46_TSMP10 MPP( 46, 0x1, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP46_TDM_FS MPP( 46, 0x2, 0, 0, 0, 0, 0, 1, 1 ) #define MPP46_LCD_HSYNC MPP( 46, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP47_GPIO MPP( 47, 0x0, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP47_TSMP11 MPP( 47, 0x1, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP47_TDM_DRX MPP( 47, 0x2, 1, 0, 0, 0, 0, 1, 1 ) +#define MPP47_TSMP11 MPP( 47, 0x1, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP47_TDM_DRX MPP( 47, 0x2, 0, 0, 0, 0, 0, 1, 1 ) #define MPP47_LCD_VSYNC MPP( 47, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP48_GPIO MPP( 48, 0x0, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP48_TSMP12 MPP( 48, 0x1, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP48_TDM_DTX MPP( 48, 0x2, 0, 1, 0, 0, 0, 1, 1 ) +#define MPP48_TSMP12 MPP( 48, 0x1, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP48_TDM_DTX MPP( 48, 0x2, 0, 0, 0, 0, 0, 1, 1 ) #define MPP48_LCD_D16 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP49_GPIO MPP( 49, 0x0, 1, 1, 0, 0, 0, 1, 0 ) #define MPP49_GPO MPP( 49, 0x0, 0, 1, 0, 0, 0, 0, 1 ) -#define MPP49_TSMP9 MPP( 49, 0x1, 1, 1, 0, 0, 0, 1, 0 ) -#define MPP49_TDM_CH0_RX_QL MPP( 49, 0x2, 0, 1, 0, 0, 0, 1, 1 ) -#define MPP49_PTP_CLK MPP( 49, 0x5, 1, 0, 0, 0, 0, 1, 0 ) -#define MPP49_PEX0_CLKREQ MPP( 49, 0xa, 0, 1, 0, 0, 0, 0, 1 ) +#define MPP49_TSMP9 MPP( 49, 0x1, 0, 0, 0, 0, 0, 1, 0 ) +#define MPP49_TDM_CH0_RX_QL MPP( 49, 0x2, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP49_PTP_CLK MPP( 49, 0x5, 0, 0, 0, 0, 0, 1, 0 ) +#define MPP49_PEX0_CLKREQ MPP( 49, 0xa, 0, 0, 0, 0, 0, 0, 1 ) #define MPP49_LCD_D17 MPP( 49, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP_MAX 49 diff --git a/arch/arm/mach-ks8695/include/mach/system.h b/arch/arm/mach-ks8695/include/mach/system.h deleted file mode 100644 index 59fe992395b..00000000000 --- a/arch/arm/mach-ks8695/include/mach/system.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * arch/arm/mach-s3c2410/include/mach/system.h - * - * Copyright (C) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * KS8695 - System function defines and includes - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static void arch_idle(void) -{ - /* - * This should do all the clock switching - * and wait for interrupt tricks, - */ - cpu_do_idle(); - -} - -#endif diff --git a/arch/arm/mach-lpc32xx/clock.c b/arch/arm/mach-lpc32xx/clock.c index 1e027514096..473015ac07b 100644 --- a/arch/arm/mach-lpc32xx/clock.c +++ b/arch/arm/mach-lpc32xx/clock.c @@ -719,6 +719,41 @@ static struct clk clk_tsc = { .get_rate = local_return_parent_rate, }; +static int adc_onoff_enable(struct clk *clk, int enable) +{ + u32 tmp; + u32 divider; + + /* Use PERIPH_CLOCK */ + tmp = __raw_readl(LPC32XX_CLKPWR_ADC_CLK_CTRL_1); + tmp |= LPC32XX_CLKPWR_ADCCTRL1_PCLK_SEL; + /* + * Set clock divider so that we have equal to or less than + * 4.5MHz clock at ADC + */ + divider = clk->get_rate(clk) / 4500000 + 1; + tmp |= divider; + __raw_writel(tmp, LPC32XX_CLKPWR_ADC_CLK_CTRL_1); + + /* synchronize rate of this clock w/ actual HW setting */ + clk->rate = clk->get_rate(clk->parent) / divider; + + if (enable == 0) + __raw_writel(0, clk->enable_reg); + else + __raw_writel(clk->enable_mask, clk->enable_reg); + + return 0; +} + +static struct clk clk_adc = { + .parent = &clk_pclk, + .enable = adc_onoff_enable, + .enable_reg = LPC32XX_CLKPWR_ADC_CLK_CTRL, + .enable_mask = LPC32XX_CLKPWR_ADC32CLKCTRL_CLK_EN, + .get_rate = local_return_parent_rate, +}; + static int mmc_onoff_enable(struct clk *clk, int enable) { u32 tmp; @@ -1075,6 +1110,7 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("dev:ssp1", NULL, clk_ssp1) _REGISTER_CLOCK("lpc32xx_keys.0", NULL, clk_kscan) _REGISTER_CLOCK("lpc32xx-nand.0", "nand_ck", clk_nand) + _REGISTER_CLOCK("lpc32xx-adc", NULL, clk_adc) _REGISTER_CLOCK("tbd", "i2s0_ck", clk_i2s0) _REGISTER_CLOCK("tbd", "i2s1_ck", clk_i2s1) _REGISTER_CLOCK("ts-lpc32xx", NULL, clk_tsc) diff --git a/arch/arm/mach-lpc32xx/common.c b/arch/arm/mach-lpc32xx/common.c index 369b152896c..6c76bb36559 100644 --- a/arch/arm/mach-lpc32xx/common.c +++ b/arch/arm/mach-lpc32xx/common.c @@ -138,6 +138,28 @@ struct platform_device lpc32xx_rtc_device = { }; /* + * ADC support + */ +static struct resource adc_resources[] = { + { + .start = LPC32XX_ADC_BASE, + .end = LPC32XX_ADC_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_LPC32XX_TS_IRQ, + .end = IRQ_LPC32XX_TS_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device lpc32xx_adc_device = { + .name = "lpc32xx-adc", + .id = -1, + .num_resources = ARRAY_SIZE(adc_resources), + .resource = adc_resources, +}; + +/* * Returns the unique ID for the device */ void lpc32xx_get_uid(u32 devid[4]) diff --git a/arch/arm/mach-lpc32xx/common.h b/arch/arm/mach-lpc32xx/common.h index 4b4e700343c..04b72739eb9 100644 --- a/arch/arm/mach-lpc32xx/common.h +++ b/arch/arm/mach-lpc32xx/common.h @@ -29,6 +29,7 @@ extern struct platform_device lpc32xx_i2c0_device; extern struct platform_device lpc32xx_i2c1_device; extern struct platform_device lpc32xx_i2c2_device; extern struct platform_device lpc32xx_tsc_device; +extern struct platform_device lpc32xx_adc_device; extern struct platform_device lpc32xx_rtc_device; /* diff --git a/arch/arm/mach-lpc32xx/include/mach/system.h b/arch/arm/mach-lpc32xx/include/mach/system.h deleted file mode 100644 index bf176c99152..00000000000 --- a/arch/arm/mach-lpc32xx/include/mach/system.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * arch/arm/mach-lpc32xx/include/mach/system.h - * - * Author: Kevin Wells <kevin.wells@nxp.com> - * - * Copyright (C) 2010 NXP Semiconductors - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static void arch_idle(void) -{ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c index bfee5b45510..a539f4f72f2 100644 --- a/arch/arm/mach-lpc32xx/phy3250.c +++ b/arch/arm/mach-lpc32xx/phy3250.c @@ -149,20 +149,8 @@ static struct clcd_board lpc32xx_clcd_data = { .remove = lpc32xx_clcd_remove, }; -static struct amba_device lpc32xx_clcd_device = { - .dev = { - .coherent_dma_mask = ~0, - .init_name = "dev:clcd", - .platform_data = &lpc32xx_clcd_data, - }, - .res = { - .start = LPC32XX_LCD_BASE, - .end = (LPC32XX_LCD_BASE + SZ_4K - 1), - .flags = IORESOURCE_MEM, - }, - .dma_mask = ~0, - .irq = {IRQ_LPC32XX_LCD, NO_IRQ}, -}; +static AMBA_AHB_DEVICE(lpc32xx_clcd, "dev:clcd", 0, + LPC32XX_LCD_BASE, { IRQ_LPC32XX_LCD }, &lpc32xx_clcd_data); /* * AMBA SSP (SPI) @@ -191,20 +179,8 @@ static struct pl022_ssp_controller lpc32xx_ssp0_data = { .enable_dma = 0, }; -static struct amba_device lpc32xx_ssp0_device = { - .dev = { - .coherent_dma_mask = ~0, - .init_name = "dev:ssp0", - .platform_data = &lpc32xx_ssp0_data, - }, - .res = { - .start = LPC32XX_SSP0_BASE, - .end = (LPC32XX_SSP0_BASE + SZ_4K - 1), - .flags = IORESOURCE_MEM, - }, - .dma_mask = ~0, - .irq = {IRQ_LPC32XX_SSP0, NO_IRQ}, -}; +static AMBA_APB_DEVICE(lpc32xx_ssp0, "dev:ssp0", 0, + LPC32XX_SSP0_BASE, { IRQ_LPC32XX_SSP0 }, &lpc32xx_ssp0_data); /* AT25 driver registration */ static int __init phy3250_spi_board_register(void) @@ -276,6 +252,7 @@ static struct platform_device *phy3250_devs[] __initdata = { &lpc32xx_i2c2_device, &lpc32xx_watchdog_device, &lpc32xx_gpio_led_device, + &lpc32xx_adc_device, }; static struct amba_device *amba_devs[] __initdata = { diff --git a/arch/arm/mach-mmp/include/mach/system.h b/arch/arm/mach-mmp/include/mach/system.h deleted file mode 100644 index 1d001eab81e..00000000000 --- a/arch/arm/mach-mmp/include/mach/system.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * linux/arch/arm/mach-mmp/include/mach/system.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_MACH_SYSTEM_H -#define __ASM_MACH_SYSTEM_H - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} -#endif /* __ASM_MACH_SYSTEM_H */ diff --git a/arch/arm/mach-msm/idle.S b/arch/arm/mach-msm/idle.S deleted file mode 100644 index 6a94f052713..00000000000 --- a/arch/arm/mach-msm/idle.S +++ /dev/null @@ -1,36 +0,0 @@ -/* arch/arm/mach-msm/include/mach/idle.S - * - * Idle processing for MSM7K - work around bugs with SWFI. - * - * Copyright (c) 2007 QUALCOMM Incorporated. - * Copyright (C) 2007 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/linkage.h> -#include <asm/assembler.h> - -ENTRY(arch_idle) -#ifdef CONFIG_MSM7X00A_IDLE - mrc p15, 0, r1, c1, c0, 0 /* read current CR */ - bic r0, r1, #(1 << 2) /* clear dcache bit */ - bic r0, r0, #(1 << 12) /* clear icache bit */ - mcr p15, 0, r0, c1, c0, 0 /* disable d/i cache */ - - mov r0, #0 /* prepare wfi value */ - mcr p15, 0, r0, c7, c10, 0 /* flush the cache */ - mcr p15, 0, r0, c7, c10, 4 /* memory barrier */ - mcr p15, 0, r0, c7, c0, 4 /* wait for interrupt */ - - mcr p15, 0, r1, c1, c0, 0 /* restore d/i cache */ -#endif - mov pc, lr diff --git a/arch/arm/mach-msm/idle.c b/arch/arm/mach-msm/idle.c new file mode 100644 index 00000000000..0c9e13c6574 --- /dev/null +++ b/arch/arm/mach-msm/idle.c @@ -0,0 +1,49 @@ +/* arch/arm/mach-msm/idle.c + * + * Idle processing for MSM7K - work around bugs with SWFI. + * + * Copyright (c) 2007 QUALCOMM Incorporated. + * Copyright (C) 2007 Google, Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/init.h> +#include <asm/system.h> + +static void msm_idle(void) +{ +#ifdef CONFIG_MSM7X00A_IDLE + asm volatile ( + + "mrc p15, 0, r1, c1, c0, 0 /* read current CR */ \n\t" + "bic r0, r1, #(1 << 2) /* clear dcache bit */ \n\t" + "bic r0, r0, #(1 << 12) /* clear icache bit */ \n\t" + "mcr p15, 0, r0, c1, c0, 0 /* disable d/i cache */ \n\t" + + "mov r0, #0 /* prepare wfi value */ \n\t" + "mcr p15, 0, r0, c7, c10, 0 /* flush the cache */ \n\t" + "mcr p15, 0, r0, c7, c10, 4 /* memory barrier */ \n\t" + "mcr p15, 0, r0, c7, c0, 4 /* wait for interrupt */ \n\t" + + "mcr p15, 0, r1, c1, c0, 0 /* restore d/i cache */ \n\t" + + : : : "r0","r1" ); +#endif +} + +static int __init msm_idle_init(void) +{ + arm_pm_idle = msm_idle; + return 0; +} + +arch_initcall(msm_idle_init); diff --git a/arch/arm/mach-msm/include/mach/system.h b/arch/arm/mach-msm/include/mach/system.h index 311db2b35da..f5fb2ec87ff 100644 --- a/arch/arm/mach-msm/include/mach/system.h +++ b/arch/arm/mach-msm/include/mach/system.h @@ -12,7 +12,6 @@ * GNU General Public License for more details. * */ -void arch_idle(void); /* low level hardware reset hook -- for example, hitting the * PSHOLD line on the PMIC to hard reset the system diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c index 0cdd41004ad..a5dcf766a3f 100644 --- a/arch/arm/mach-mv78xx0/common.c +++ b/arch/arm/mach-mv78xx0/common.c @@ -19,6 +19,7 @@ #include <mach/mv78xx0.h> #include <mach/bridge-regs.h> #include <plat/cache-feroceon-l2.h> +#include <plat/ehci-orion.h> #include <plat/orion_nand.h> #include <plat/time.h> #include <plat/common.h> @@ -169,7 +170,7 @@ void __init mv78xx0_map_io(void) ****************************************************************************/ void __init mv78xx0_ehci0_init(void) { - orion_ehci_init(USB0_PHYS_BASE, IRQ_MV78XX0_USB_0); + orion_ehci_init(USB0_PHYS_BASE, IRQ_MV78XX0_USB_0, EHCI_PHY_NA); } diff --git a/arch/arm/mach-mv78xx0/include/mach/system.h b/arch/arm/mach-mv78xx0/include/mach/system.h deleted file mode 100644 index 8c3a5387cec..00000000000 --- a/arch/arm/mach-mv78xx0/include/mach/system.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * arch/arm/mach-mv78xx0/include/mach/system.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/mach-mv78xx0/mpp.h b/arch/arm/mach-mv78xx0/mpp.h index b61b5092712..3752302ae2e 100644 --- a/arch/arm/mach-mv78xx0/mpp.h +++ b/arch/arm/mach-mv78xx0/mpp.h @@ -24,296 +24,296 @@ #define MPP_78100_A0_MASK MPP(0, 0x0, 0, 0, 1) #define MPP0_GPIO MPP(0, 0x0, 1, 1, 1) -#define MPP0_GE0_COL MPP(0, 0x1, 1, 0, 1) -#define MPP0_GE1_TXCLK MPP(0, 0x2, 0, 1, 1) +#define MPP0_GE0_COL MPP(0, 0x1, 0, 0, 1) +#define MPP0_GE1_TXCLK MPP(0, 0x2, 0, 0, 1) #define MPP0_UNUSED MPP(0, 0x3, 0, 0, 1) #define MPP1_GPIO MPP(1, 0x0, 1, 1, 1) -#define MPP1_GE0_RXERR MPP(1, 0x1, 1, 0, 1) -#define MPP1_GE1_TXCTL MPP(1, 0x2, 0, 1, 1) +#define MPP1_GE0_RXERR MPP(1, 0x1, 0, 0, 1) +#define MPP1_GE1_TXCTL MPP(1, 0x2, 0, 0, 1) #define MPP1_UNUSED MPP(1, 0x3, 0, 0, 1) #define MPP2_GPIO MPP(2, 0x0, 1, 1, 1) -#define MPP2_GE0_CRS MPP(2, 0x1, 1, 0, 1) -#define MPP2_GE1_RXCTL MPP(2, 0x2, 1, 0, 1) +#define MPP2_GE0_CRS MPP(2, 0x1, 0, 0, 1) +#define MPP2_GE1_RXCTL MPP(2, 0x2, 0, 0, 1) #define MPP2_UNUSED MPP(2, 0x3, 0, 0, 1) #define MPP3_GPIO MPP(3, 0x0, 1, 1, 1) -#define MPP3_GE0_TXERR MPP(3, 0x1, 0, 1, 1) -#define MPP3_GE1_RXCLK MPP(3, 0x2, 1, 0, 1) +#define MPP3_GE0_TXERR MPP(3, 0x1, 0, 0, 1) +#define MPP3_GE1_RXCLK MPP(3, 0x2, 0, 0, 1) #define MPP3_UNUSED MPP(3, 0x3, 0, 0, 1) #define MPP4_GPIO MPP(4, 0x0, 1, 1, 1) -#define MPP4_GE0_TXD4 MPP(4, 0x1, 0, 1, 1) -#define MPP4_GE1_TXD0 MPP(4, 0x2, 0, 1, 1) +#define MPP4_GE0_TXD4 MPP(4, 0x1, 0, 0, 1) +#define MPP4_GE1_TXD0 MPP(4, 0x2, 0, 0, 1) #define MPP4_UNUSED MPP(4, 0x3, 0, 0, 1) #define MPP5_GPIO MPP(5, 0x0, 1, 1, 1) -#define MPP5_GE0_TXD5 MPP(5, 0x1, 0, 1, 1) -#define MPP5_GE1_TXD1 MPP(5, 0x2, 0, 1, 1) +#define MPP5_GE0_TXD5 MPP(5, 0x1, 0, 0, 1) +#define MPP5_GE1_TXD1 MPP(5, 0x2, 0, 0, 1) #define MPP5_UNUSED MPP(5, 0x3, 0, 0, 1) #define MPP6_GPIO MPP(6, 0x0, 1, 1, 1) -#define MPP6_GE0_TXD6 MPP(6, 0x1, 0, 1, 1) -#define MPP6_GE1_TXD2 MPP(6, 0x2, 0, 1, 1) +#define MPP6_GE0_TXD6 MPP(6, 0x1, 0, 0, 1) +#define MPP6_GE1_TXD2 MPP(6, 0x2, 0, 0, 1) #define MPP6_UNUSED MPP(6, 0x3, 0, 0, 1) #define MPP7_GPIO MPP(7, 0x0, 1, 1, 1) -#define MPP7_GE0_TXD7 MPP(7, 0x1, 0, 1, 1) -#define MPP7_GE1_TXD3 MPP(7, 0x2, 0, 1, 1) +#define MPP7_GE0_TXD7 MPP(7, 0x1, 0, 0, 1) +#define MPP7_GE1_TXD3 MPP(7, 0x2, 0, 0, 1) #define MPP7_UNUSED MPP(7, 0x3, 0, 0, 1) #define MPP8_GPIO MPP(8, 0x0, 1, 1, 1) -#define MPP8_GE0_RXD4 MPP(8, 0x1, 1, 0, 1) -#define MPP8_GE1_RXD0 MPP(8, 0x2, 1, 0, 1) +#define MPP8_GE0_RXD4 MPP(8, 0x1, 0, 0, 1) +#define MPP8_GE1_RXD0 MPP(8, 0x2, 0, 0, 1) #define MPP8_UNUSED MPP(8, 0x3, 0, 0, 1) #define MPP9_GPIO MPP(9, 0x0, 1, 1, 1) -#define MPP9_GE0_RXD5 MPP(9, 0x1, 1, 0, 1) -#define MPP9_GE1_RXD1 MPP(9, 0x2, 1, 0, 1) +#define MPP9_GE0_RXD5 MPP(9, 0x1, 0, 0, 1) +#define MPP9_GE1_RXD1 MPP(9, 0x2, 0, 0, 1) #define MPP9_UNUSED MPP(9, 0x3, 0, 0, 1) #define MPP10_GPIO MPP(10, 0x0, 1, 1, 1) -#define MPP10_GE0_RXD6 MPP(10, 0x1, 1, 0, 1) -#define MPP10_GE1_RXD2 MPP(10, 0x2, 1, 0, 1) +#define MPP10_GE0_RXD6 MPP(10, 0x1, 0, 0, 1) +#define MPP10_GE1_RXD2 MPP(10, 0x2, 0, 0, 1) #define MPP10_UNUSED MPP(10, 0x3, 0, 0, 1) #define MPP11_GPIO MPP(11, 0x0, 1, 1, 1) -#define MPP11_GE0_RXD7 MPP(11, 0x1, 1, 0, 1) -#define MPP11_GE1_RXD3 MPP(11, 0x2, 1, 0, 1) +#define MPP11_GE0_RXD7 MPP(11, 0x1, 0, 0, 1) +#define MPP11_GE1_RXD3 MPP(11, 0x2, 0, 0, 1) #define MPP11_UNUSED MPP(11, 0x3, 0, 0, 1) #define MPP12_GPIO MPP(12, 0x0, 1, 1, 1) -#define MPP12_M_BB MPP(12, 0x3, 1, 0, 1) -#define MPP12_UA0_CTSn MPP(12, 0x4, 1, 0, 1) -#define MPP12_NAND_FLASH_REn0 MPP(12, 0x5, 0, 1, 1) -#define MPP12_TDM0_SCSn MPP(12, 0X6, 0, 1, 1) +#define MPP12_M_BB MPP(12, 0x3, 0, 0, 1) +#define MPP12_UA0_CTSn MPP(12, 0x4, 0, 0, 1) +#define MPP12_NAND_FLASH_REn0 MPP(12, 0x5, 0, 0, 1) +#define MPP12_TDM0_SCSn MPP(12, 0X6, 0, 0, 1) #define MPP12_UNUSED MPP(12, 0x1, 0, 0, 1) #define MPP13_GPIO MPP(13, 0x0, 1, 1, 1) -#define MPP13_SYSRST_OUTn MPP(13, 0x3, 0, 1, 1) -#define MPP13_UA0_RTSn MPP(13, 0x4, 0, 1, 1) -#define MPP13_NAN_FLASH_WEn0 MPP(13, 0x5, 0, 1, 1) -#define MPP13_TDM_SCLK MPP(13, 0x6, 0, 1, 1) +#define MPP13_SYSRST_OUTn MPP(13, 0x3, 0, 0, 1) +#define MPP13_UA0_RTSn MPP(13, 0x4, 0, 0, 1) +#define MPP13_NAN_FLASH_WEn0 MPP(13, 0x5, 0, 0, 1) +#define MPP13_TDM_SCLK MPP(13, 0x6, 0, 0, 1) #define MPP13_UNUSED MPP(13, 0x1, 0, 0, 1) #define MPP14_GPIO MPP(14, 0x0, 1, 1, 1) -#define MPP14_SATA1_ACTn MPP(14, 0x3, 0, 1, 1) -#define MPP14_UA1_CTSn MPP(14, 0x4, 1, 0, 1) -#define MPP14_NAND_FLASH_REn1 MPP(14, 0x5, 0, 1, 1) -#define MPP14_TDM_SMOSI MPP(14, 0x6, 0, 1, 1) +#define MPP14_SATA1_ACTn MPP(14, 0x3, 0, 0, 1) +#define MPP14_UA1_CTSn MPP(14, 0x4, 0, 0, 1) +#define MPP14_NAND_FLASH_REn1 MPP(14, 0x5, 0, 0, 1) +#define MPP14_TDM_SMOSI MPP(14, 0x6, 0, 0, 1) #define MPP14_UNUSED MPP(14, 0x1, 0, 0, 1) #define MPP15_GPIO MPP(15, 0x0, 1, 1, 1) -#define MPP15_SATA0_ACTn MPP(15, 0x3, 0, 1, 1) -#define MPP15_UA1_RTSn MPP(15, 0x4, 0, 1, 1) -#define MPP15_NAND_FLASH_WEn1 MPP(15, 0x5, 0, 1, 1) -#define MPP15_TDM_SMISO MPP(15, 0x6, 1, 0, 1) +#define MPP15_SATA0_ACTn MPP(15, 0x3, 0, 0, 1) +#define MPP15_UA1_RTSn MPP(15, 0x4, 0, 0, 1) +#define MPP15_NAND_FLASH_WEn1 MPP(15, 0x5, 0, 0, 1) +#define MPP15_TDM_SMISO MPP(15, 0x6, 0, 0, 1) #define MPP15_UNUSED MPP(15, 0x1, 0, 0, 1) #define MPP16_GPIO MPP(16, 0x0, 1, 1, 1) -#define MPP16_SATA1_PRESENTn MPP(16, 0x3, 0, 1, 1) -#define MPP16_UA2_TXD MPP(16, 0x4, 0, 1, 1) -#define MPP16_NAND_FLASH_REn3 MPP(16, 0x5, 0, 1, 1) -#define MPP16_TDM_INTn MPP(16, 0x6, 1, 0, 1) +#define MPP16_SATA1_PRESENTn MPP(16, 0x3, 0, 0, 1) +#define MPP16_UA2_TXD MPP(16, 0x4, 0, 0, 1) +#define MPP16_NAND_FLASH_REn3 MPP(16, 0x5, 0, 0, 1) +#define MPP16_TDM_INTn MPP(16, 0x6, 0, 0, 1) #define MPP16_UNUSED MPP(16, 0x1, 0, 0, 1) #define MPP17_GPIO MPP(17, 0x0, 1, 1, 1) -#define MPP17_SATA0_PRESENTn MPP(17, 0x3, 0, 1, 1) -#define MPP17_UA2_RXD MPP(17, 0x4, 1, 0, 1) -#define MPP17_NAND_FLASH_WEn3 MPP(17, 0x5, 0, 1, 1) -#define MPP17_TDM_RSTn MPP(17, 0x6, 0, 1, 1) +#define MPP17_SATA0_PRESENTn MPP(17, 0x3, 0, 0, 1) +#define MPP17_UA2_RXD MPP(17, 0x4, 0, 0, 1) +#define MPP17_NAND_FLASH_WEn3 MPP(17, 0x5, 0, 0, 1) +#define MPP17_TDM_RSTn MPP(17, 0x6, 0, 0, 1) #define MPP17_UNUSED MPP(17, 0x1, 0, 0, 1) #define MPP18_GPIO MPP(18, 0x0, 1, 1, 1) -#define MPP18_UA0_CTSn MPP(18, 0x4, 1, 0, 1) -#define MPP18_BOOT_FLASH_REn MPP(18, 0x5, 0, 1, 1) +#define MPP18_UA0_CTSn MPP(18, 0x4, 0, 0, 1) +#define MPP18_BOOT_FLASH_REn MPP(18, 0x5, 0, 0, 1) #define MPP18_UNUSED MPP(18, 0x1, 0, 0, 1) #define MPP19_GPIO MPP(19, 0x0, 1, 1, 1) -#define MPP19_UA0_CTSn MPP(19, 0x4, 0, 1, 1) -#define MPP19_BOOT_FLASH_WEn MPP(19, 0x5, 0, 1, 1) +#define MPP19_UA0_CTSn MPP(19, 0x4, 0, 0, 1) +#define MPP19_BOOT_FLASH_WEn MPP(19, 0x5, 0, 0, 1) #define MPP19_UNUSED MPP(19, 0x1, 0, 0, 1) #define MPP20_GPIO MPP(20, 0x0, 1, 1, 1) -#define MPP20_UA1_CTSs MPP(20, 0x4, 1, 0, 1) -#define MPP20_TDM_PCLK MPP(20, 0x6, 1, 1, 0) +#define MPP20_UA1_CTSs MPP(20, 0x4, 0, 0, 1) +#define MPP20_TDM_PCLK MPP(20, 0x6, 0, 0, 0) #define MPP20_UNUSED MPP(20, 0x1, 0, 0, 1) #define MPP21_GPIO MPP(21, 0x0, 1, 1, 1) -#define MPP21_UA1_CTSs MPP(21, 0x4, 0, 1, 1) -#define MPP21_TDM_FSYNC MPP(21, 0x6, 1, 1, 0) +#define MPP21_UA1_CTSs MPP(21, 0x4, 0, 0, 1) +#define MPP21_TDM_FSYNC MPP(21, 0x6, 0, 0, 0) #define MPP21_UNUSED MPP(21, 0x1, 0, 0, 1) #define MPP22_GPIO MPP(22, 0x0, 1, 1, 1) -#define MPP22_UA3_TDX MPP(22, 0x4, 0, 1, 1) -#define MPP22_NAND_FLASH_REn2 MPP(22, 0x5, 0, 1, 1) -#define MPP22_TDM_DRX MPP(22, 0x6, 1, 0, 1) +#define MPP22_UA3_TDX MPP(22, 0x4, 0, 0, 1) +#define MPP22_NAND_FLASH_REn2 MPP(22, 0x5, 0, 0, 1) +#define MPP22_TDM_DRX MPP(22, 0x6, 0, 0, 1) #define MPP22_UNUSED MPP(22, 0x1, 0, 0, 1) #define MPP23_GPIO MPP(23, 0x0, 1, 1, 1) -#define MPP23_UA3_RDX MPP(23, 0x4, 1, 0, 1) -#define MPP23_NAND_FLASH_WEn2 MPP(23, 0x5, 0, 1, 1) -#define MPP23_TDM_DTX MPP(23, 0x6, 0, 1, 1) +#define MPP23_UA3_RDX MPP(23, 0x4, 0, 0, 1) +#define MPP23_NAND_FLASH_WEn2 MPP(23, 0x5, 0, 0, 1) +#define MPP23_TDM_DTX MPP(23, 0x6, 0, 0, 1) #define MPP23_UNUSED MPP(23, 0x1, 0, 0, 1) #define MPP24_GPIO MPP(24, 0x0, 1, 1, 1) -#define MPP24_UA2_TXD MPP(24, 0x4, 0, 1, 1) -#define MPP24_TDM_INTn MPP(24, 0x6, 1, 0, 1) +#define MPP24_UA2_TXD MPP(24, 0x4, 0, 0, 1) +#define MPP24_TDM_INTn MPP(24, 0x6, 0, 0, 1) #define MPP24_UNUSED MPP(24, 0x1, 0, 0, 1) #define MPP25_GPIO MPP(25, 0x0, 1, 1, 1) -#define MPP25_UA2_RXD MPP(25, 0x4, 1, 0, 1) -#define MPP25_TDM_RSTn MPP(25, 0x6, 0, 1, 1) +#define MPP25_UA2_RXD MPP(25, 0x4, 0, 0, 1) +#define MPP25_TDM_RSTn MPP(25, 0x6, 0, 0, 1) #define MPP25_UNUSED MPP(25, 0x1, 0, 0, 1) #define MPP26_GPIO MPP(26, 0x0, 1, 1, 1) -#define MPP26_UA2_CTSn MPP(26, 0x4, 1, 0, 1) -#define MPP26_TDM_PCLK MPP(26, 0x6, 1, 1, 1) +#define MPP26_UA2_CTSn MPP(26, 0x4, 0, 0, 1) +#define MPP26_TDM_PCLK MPP(26, 0x6, 0, 0, 1) #define MPP26_UNUSED MPP(26, 0x1, 0, 0, 1) #define MPP27_GPIO MPP(27, 0x0, 1, 1, 1) -#define MPP27_UA2_RTSn MPP(27, 0x4, 0, 1, 1) -#define MPP27_TDM_FSYNC MPP(27, 0x6, 1, 1, 1) +#define MPP27_UA2_RTSn MPP(27, 0x4, 0, 0, 1) +#define MPP27_TDM_FSYNC MPP(27, 0x6, 0, 0, 1) #define MPP27_UNUSED MPP(27, 0x1, 0, 0, 1) #define MPP28_GPIO MPP(28, 0x0, 1, 1, 1) -#define MPP28_UA3_TXD MPP(28, 0x4, 0, 1, 1) -#define MPP28_TDM_DRX MPP(28, 0x6, 1, 0, 1) +#define MPP28_UA3_TXD MPP(28, 0x4, 0, 0, 1) +#define MPP28_TDM_DRX MPP(28, 0x6, 0, 0, 1) #define MPP28_UNUSED MPP(28, 0x1, 0, 0, 1) #define MPP29_GPIO MPP(29, 0x0, 1, 1, 1) -#define MPP29_UA3_RXD MPP(29, 0x4, 1, 0, 1) -#define MPP29_SYSRST_OUTn MPP(29, 0x5, 0, 1, 1) -#define MPP29_TDM_DTX MPP(29, 0x6, 0, 1, 1) +#define MPP29_UA3_RXD MPP(29, 0x4, 0, 0, 1) +#define MPP29_SYSRST_OUTn MPP(29, 0x5, 0, 0, 1) +#define MPP29_TDM_DTX MPP(29, 0x6, 0, 0, 1) #define MPP29_UNUSED MPP(29, 0x1, 0, 0, 1) #define MPP30_GPIO MPP(30, 0x0, 1, 1, 1) -#define MPP30_UA3_CTSn MPP(30, 0x4, 1, 0, 1) +#define MPP30_UA3_CTSn MPP(30, 0x4, 0, 0, 1) #define MPP30_UNUSED MPP(30, 0x1, 0, 0, 1) #define MPP31_GPIO MPP(31, 0x0, 1, 1, 1) -#define MPP31_UA3_RTSn MPP(31, 0x4, 0, 1, 1) -#define MPP31_TDM1_SCSn MPP(31, 0x6, 0, 1, 1) +#define MPP31_UA3_RTSn MPP(31, 0x4, 0, 0, 1) +#define MPP31_TDM1_SCSn MPP(31, 0x6, 0, 0, 1) #define MPP31_UNUSED MPP(31, 0x1, 0, 0, 1) #define MPP32_GPIO MPP(32, 0x1, 1, 1, 1) -#define MPP32_UA3_TDX MPP(32, 0x4, 0, 1, 1) -#define MPP32_SYSRST_OUTn MPP(32, 0x5, 0, 1, 1) -#define MPP32_TDM0_RXQ MPP(32, 0x6, 0, 1, 1) +#define MPP32_UA3_TDX MPP(32, 0x4, 0, 0, 1) +#define MPP32_SYSRST_OUTn MPP(32, 0x5, 0, 0, 1) +#define MPP32_TDM0_RXQ MPP(32, 0x6, 0, 0, 1) #define MPP32_UNUSED MPP(32, 0x3, 0, 0, 1) #define MPP33_GPIO MPP(33, 0x1, 1, 1, 1) -#define MPP33_UA3_RDX MPP(33, 0x4, 1, 0, 1) -#define MPP33_TDM0_TXQ MPP(33, 0x6, 0, 1, 1) +#define MPP33_UA3_RDX MPP(33, 0x4, 0, 0, 1) +#define MPP33_TDM0_TXQ MPP(33, 0x6, 0, 0, 1) #define MPP33_UNUSED MPP(33, 0x3, 0, 0, 1) #define MPP34_GPIO MPP(34, 0x1, 1, 1, 1) -#define MPP34_UA2_TDX MPP(34, 0x4, 0, 1, 1) -#define MPP34_TDM1_RXQ MPP(34, 0x6, 0, 1, 1) +#define MPP34_UA2_TDX MPP(34, 0x4, 0, 0, 1) +#define MPP34_TDM1_RXQ MPP(34, 0x6, 0, 0, 1) #define MPP34_UNUSED MPP(34, 0x3, 0, 0, 1) #define MPP35_GPIO MPP(35, 0x1, 1, 1, 1) -#define MPP35_UA2_RDX MPP(35, 0x4, 1, 0, 1) -#define MPP35_TDM1_TXQ MPP(35, 0x6, 0, 1, 1) +#define MPP35_UA2_RDX MPP(35, 0x4, 0, 0, 1) +#define MPP35_TDM1_TXQ MPP(35, 0x6, 0, 0, 1) #define MPP35_UNUSED MPP(35, 0x3, 0, 0, 1) #define MPP36_GPIO MPP(36, 0x1, 1, 1, 1) -#define MPP36_UA0_CTSn MPP(36, 0x2, 1, 0, 1) -#define MPP36_UA2_TDX MPP(36, 0x4, 0, 1, 1) -#define MPP36_TDM0_SCSn MPP(36, 0x6, 0, 1, 1) +#define MPP36_UA0_CTSn MPP(36, 0x2, 0, 0, 1) +#define MPP36_UA2_TDX MPP(36, 0x4, 0, 0, 1) +#define MPP36_TDM0_SCSn MPP(36, 0x6, 0, 0, 1) #define MPP36_UNUSED MPP(36, 0x3, 0, 0, 1) #define MPP37_GPIO MPP(37, 0x1, 1, 1, 1) -#define MPP37_UA0_RTSn MPP(37, 0x2, 0, 1, 1) -#define MPP37_UA2_RXD MPP(37, 0x4, 1, 0, 1) -#define MPP37_SYSRST_OUTn MPP(37, 0x5, 0, 1, 1) -#define MPP37_TDM_SCLK MPP(37, 0x6, 0, 1, 1) +#define MPP37_UA0_RTSn MPP(37, 0x2, 0, 0, 1) +#define MPP37_UA2_RXD MPP(37, 0x4, 0, 0, 1) +#define MPP37_SYSRST_OUTn MPP(37, 0x5, 0, 0, 1) +#define MPP37_TDM_SCLK MPP(37, 0x6, 0, 0, 1) #define MPP37_UNUSED MPP(37, 0x3, 0, 0, 1) #define MPP38_GPIO MPP(38, 0x1, 1, 1, 1) -#define MPP38_UA1_CTSn MPP(38, 0x2, 1, 0, 1) -#define MPP38_UA3_TXD MPP(38, 0x4, 0, 1, 1) -#define MPP38_SYSRST_OUTn MPP(38, 0x5, 0, 1, 1) -#define MPP38_TDM_SMOSI MPP(38, 0x6, 0, 1, 1) +#define MPP38_UA1_CTSn MPP(38, 0x2, 0, 0, 1) +#define MPP38_UA3_TXD MPP(38, 0x4, 0, 0, 1) +#define MPP38_SYSRST_OUTn MPP(38, 0x5, 0, 0, 1) +#define MPP38_TDM_SMOSI MPP(38, 0x6, 0, 0, 1) #define MPP38_UNUSED MPP(38, 0x3, 0, 0, 1) #define MPP39_GPIO MPP(39, 0x1, 1, 1, 1) -#define MPP39_UA1_RTSn MPP(39, 0x2, 0, 1, 1) -#define MPP39_UA3_RXD MPP(39, 0x4, 1, 0, 1) -#define MPP39_SYSRST_OUTn MPP(39, 0x5, 0, 1, 1) -#define MPP39_TDM_SMISO MPP(39, 0x6, 1, 0, 1) +#define MPP39_UA1_RTSn MPP(39, 0x2, 0, 0, 1) +#define MPP39_UA3_RXD MPP(39, 0x4, 0, 0, 1) +#define MPP39_SYSRST_OUTn MPP(39, 0x5, 0, 0, 1) +#define MPP39_TDM_SMISO MPP(39, 0x6, 0, 0, 1) #define MPP39_UNUSED MPP(39, 0x3, 0, 0, 1) #define MPP40_GPIO MPP(40, 0x1, 1, 1, 1) -#define MPP40_TDM_INTn MPP(40, 0x6, 1, 0, 1) +#define MPP40_TDM_INTn MPP(40, 0x6, 0, 0, 1) #define MPP40_UNUSED MPP(40, 0x0, 0, 0, 1) #define MPP41_GPIO MPP(41, 0x1, 1, 1, 1) -#define MPP41_TDM_RSTn MPP(41, 0x6, 0, 1, 1) +#define MPP41_TDM_RSTn MPP(41, 0x6, 0, 0, 1) #define MPP41_UNUSED MPP(41, 0x0, 0, 0, 1) #define MPP42_GPIO MPP(42, 0x1, 1, 1, 1) -#define MPP42_TDM_PCLK MPP(42, 0x6, 1, 1, 1) +#define MPP42_TDM_PCLK MPP(42, 0x6, 0, 0, 1) #define MPP42_UNUSED MPP(42, 0x0, 0, 0, 1) #define MPP43_GPIO MPP(43, 0x1, 1, 1, 1) -#define MPP43_TDM_FSYNC MPP(43, 0x6, 1, 1, 1) +#define MPP43_TDM_FSYNC MPP(43, 0x6, 0, 0, 1) #define MPP43_UNUSED MPP(43, 0x0, 0, 0, 1) #define MPP44_GPIO MPP(44, 0x1, 1, 1, 1) -#define MPP44_TDM_DRX MPP(44, 0x6, 1, 0, 1) +#define MPP44_TDM_DRX MPP(44, 0x6, 0, 0, 1) #define MPP44_UNUSED MPP(44, 0x0, 0, 0, 1) #define MPP45_GPIO MPP(45, 0x1, 1, 1, 1) -#define MPP45_SATA0_ACTn MPP(45, 0x3, 0, 1, 1) -#define MPP45_TDM_DRX MPP(45, 0x6, 0, 1, 1) +#define MPP45_SATA0_ACTn MPP(45, 0x3, 0, 0, 1) +#define MPP45_TDM_DRX MPP(45, 0x6, 0, 0, 1) #define MPP45_UNUSED MPP(45, 0x0, 0, 0, 1) #define MPP46_GPIO MPP(46, 0x1, 1, 1, 1) -#define MPP46_TDM_SCSn MPP(46, 0x6, 0, 1, 1) +#define MPP46_TDM_SCSn MPP(46, 0x6, 0, 0, 1) #define MPP46_UNUSED MPP(46, 0x0, 0, 0, 1) @@ -323,14 +323,14 @@ #define MPP48_GPIO MPP(48, 0x1, 1, 1, 1) -#define MPP48_SATA1_ACTn MPP(48, 0x3, 0, 1, 1) +#define MPP48_SATA1_ACTn MPP(48, 0x3, 0, 0, 1) #define MPP48_UNUSED MPP(48, 0x2, 0, 0, 1) #define MPP49_GPIO MPP(49, 0x1, 1, 1, 1) -#define MPP49_SATA0_ACTn MPP(49, 0x3, 0, 1, 1) -#define MPP49_M_BB MPP(49, 0x4, 1, 0, 1) +#define MPP49_SATA0_ACTn MPP(49, 0x3, 0, 0, 1) +#define MPP49_M_BB MPP(49, 0x4, 0, 0, 1) #define MPP49_UNUSED MPP(49, 0x2, 0, 0, 1) diff --git a/arch/arm/mach-mxs/devices.c b/arch/arm/mach-mxs/devices.c index fe3e847930c..01faffec306 100644 --- a/arch/arm/mach-mxs/devices.c +++ b/arch/arm/mach-mxs/devices.c @@ -77,16 +77,18 @@ err: int __init mxs_add_amba_device(const struct amba_device *dev) { - struct amba_device *adev = kmalloc(sizeof(*adev), GFP_KERNEL); + struct amba_device *adev = amba_device_alloc(dev->dev.init_name, + dev->res.start, resource_size(&dev->res)); if (!adev) { pr_err("%s: failed to allocate memory", __func__); return -ENOMEM; } - *adev = *dev; + adev->irq[0] = dev->irq[0]; + adev->irq[1] = dev->irq[1]; - return amba_device_register(adev, &iomem_resource); + return amba_device_add(adev, &iomem_resource); } struct device mxs_apbh_bus = { diff --git a/arch/arm/mach-mxs/devices/amba-duart.c b/arch/arm/mach-mxs/devices/amba-duart.c index a559db09b49..a5479f76604 100644 --- a/arch/arm/mach-mxs/devices/amba-duart.c +++ b/arch/arm/mach-mxs/devices/amba-duart.c @@ -23,7 +23,7 @@ const struct amba_device name##_device __initconst = { \ .end = (soc ## _DUART_BASE_ADDR) + SZ_8K - 1, \ .flags = IORESOURCE_MEM, \ }, \ - .irq = {soc ## _INT_DUART, NO_IRQ}, \ + .irq = {soc ## _INT_DUART}, \ } #ifdef CONFIG_SOC_IMX23 diff --git a/arch/arm/mach-mxs/include/mach/system.h b/arch/arm/mach-mxs/include/mach/system.h deleted file mode 100644 index e7ad1bb2942..00000000000 --- a/arch/arm/mach-mxs/include/mach/system.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * Copyright (C) 1999 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * Copyright 2004-2008 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __MACH_MXS_SYSTEM_H__ -#define __MACH_MXS_SYSTEM_H__ - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -#endif /* __MACH_MXS_SYSTEM_H__ */ diff --git a/arch/arm/mach-mxs/pm.c b/arch/arm/mach-mxs/pm.c index fb042da29bd..a9b4bbcdafb 100644 --- a/arch/arm/mach-mxs/pm.c +++ b/arch/arm/mach-mxs/pm.c @@ -15,13 +15,12 @@ #include <linux/kernel.h> #include <linux/suspend.h> #include <linux/io.h> -#include <mach/system.h> static int mxs_suspend_enter(suspend_state_t state) { switch (state) { case PM_SUSPEND_MEM: - arch_idle(); + cpu_do_idle(); break; default: diff --git a/arch/arm/mach-netx/fb.c b/arch/arm/mach-netx/fb.c index b9913234bbf..2cdf6ef69be 100644 --- a/arch/arm/mach-netx/fb.c +++ b/arch/arm/mach-netx/fb.c @@ -92,18 +92,7 @@ void clk_put(struct clk *clk) { } -static struct amba_device fb_device = { - .dev = { - .init_name = "fb", - .coherent_dma_mask = ~0, - }, - .res = { - .start = 0x00104000, - .end = 0x00104fff, - .flags = IORESOURCE_MEM, - }, - .irq = { NETX_IRQ_LCD, NO_IRQ }, -}; +static AMBA_AHB_DEVICE(fb, "fb", 0, 0x00104000, { NETX_IRQ_LCD }, NULL); int netx_fb_init(struct clcd_board *board, struct clcd_panel *panel) { diff --git a/arch/arm/mach-netx/include/mach/system.h b/arch/arm/mach-netx/include/mach/system.h deleted file mode 100644 index b38fa36d58c..00000000000 --- a/arch/arm/mach-netx/include/mach/system.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * arch/arm/mach-netx/include/mach/system.h - * - * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -#endif - diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c index 7c878bf0034..f6f74adbe8c 100644 --- a/arch/arm/mach-nomadik/board-nhk8815.c +++ b/arch/arm/mach-nomadik/board-nhk8815.c @@ -185,20 +185,11 @@ static void __init nhk8815_onenand_init(void) #endif } -#define __MEM_4K_RESOURCE(x) \ - .res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM} +static AMBA_APB_DEVICE(uart0, "uart0", 0, NOMADIK_UART0_BASE, + { IRQ_UART0 }, NULL); -static struct amba_device uart0_device = { - .dev = { .init_name = "uart0" }, - __MEM_4K_RESOURCE(NOMADIK_UART0_BASE), - .irq = {IRQ_UART0, NO_IRQ}, -}; - -static struct amba_device uart1_device = { - .dev = { .init_name = "uart1" }, - __MEM_4K_RESOURCE(NOMADIK_UART1_BASE), - .irq = {IRQ_UART1, NO_IRQ}, -}; +static AMBA_APB_DEVICE(uart1, "uart1", 0, NOMADIK_UART1_BASE, + { IRQ_UART1 }, NULL); static struct amba_device *amba_devs[] __initdata = { &uart0_device, diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c index 65df7b4fdd3..27f43a46985 100644 --- a/arch/arm/mach-nomadik/cpu-8815.c +++ b/arch/arm/mach-nomadik/cpu-8815.c @@ -97,12 +97,7 @@ static struct platform_device cpu8815_platform_gpio[] = { GPIO_DEVICE(3), }; -static struct amba_device cpu8815_amba_rng = { - .dev = { - .init_name = "rng", - }, - __MEM_4K_RESOURCE(NOMADIK_RNG_BASE), -}; +static AMBA_APB_DEVICE(cpu8815_amba_rng, "rng", 0, NOMADIK_RNG_BASE, { }, NULL); static struct platform_device *platform_devs[] __initdata = { cpu8815_platform_gpio + 0, @@ -112,7 +107,7 @@ static struct platform_device *platform_devs[] __initdata = { }; static struct amba_device *amba_devs[] __initdata = { - &cpu8815_amba_rng + &cpu8815_amba_rng_device }; static int __init cpu8815_init(void) diff --git a/arch/arm/mach-nomadik/include/mach/system.h b/arch/arm/mach-nomadik/include/mach/system.h deleted file mode 100644 index 25e198b8976..00000000000 --- a/arch/arm/mach-nomadik/include/mach/system.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * mach-nomadik/include/mach/system.h - * - * Copyright (C) 2008 STMicroelectronics - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static inline void arch_idle(void) -{ - /* - * This should do all the clock switching - * and wait for interrupt tricks - */ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/mach-omap1/include/mach/system.h b/arch/arm/mach-omap1/include/mach/system.h deleted file mode 100644 index a6c1b3a16df..00000000000 --- a/arch/arm/mach-omap1/include/mach/system.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * arch/arm/mach-omap1/include/mach/system.h - */ - -#include <plat/system.h> diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index 89ea20ca0cc..0c2c3669d59 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -42,9 +42,9 @@ #include <linux/sysfs.h> #include <linux/module.h> #include <linux/io.h> +#include <linux/atomic.h> #include <asm/irq.h> -#include <linux/atomic.h> #include <asm/mach/time.h> #include <asm/mach/irq.h> @@ -108,13 +108,7 @@ void omap1_pm_idle(void) __u32 use_idlect1 = arm_idlect1_mask; int do_sleep = 0; - local_irq_disable(); local_fiq_disable(); - if (need_resched()) { - local_fiq_enable(); - local_irq_enable(); - return; - } #if defined(CONFIG_OMAP_MPU_TIMER) && !defined(CONFIG_OMAP_DM_TIMER) #warning Enable 32kHz OS timer in order to allow sleep states in idle @@ -157,14 +151,12 @@ void omap1_pm_idle(void) omap_writel(saved_idlect1, ARM_IDLECT1); local_fiq_enable(); - local_irq_enable(); return; } omap_sram_suspend(omap_readl(ARM_IDLECT1), omap_readl(ARM_IDLECT2)); local_fiq_enable(); - local_irq_enable(); } /* @@ -583,8 +575,6 @@ static void omap_pm_init_proc(void) #endif /* DEBUG && CONFIG_PROC_FS */ -static void (*saved_idle)(void) = NULL; - /* * omap_pm_prepare - Do preliminary suspend work. * @@ -592,8 +582,7 @@ static void (*saved_idle)(void) = NULL; static int omap_pm_prepare(void) { /* We cannot sleep in idle until we have resumed */ - saved_idle = pm_idle; - pm_idle = NULL; + disable_hlt(); return 0; } @@ -630,7 +619,7 @@ static int omap_pm_enter(suspend_state_t state) static void omap_pm_finish(void) { - pm_idle = saved_idle; + enable_hlt(); } @@ -687,7 +676,7 @@ static int __init omap_pm_init(void) return -ENODEV; } - pm_idle = omap1_pm_idle; + arm_pm_idle = omap1_pm_idle; if (cpu_is_omap7xx()) setup_irq(INT_7XX_WAKE_UP_REQ, &omap_wakeup_irq); diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 41e6612ecba..d965da45160 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -213,13 +213,12 @@ config MACH_OMAP3_PANDORA depends on ARCH_OMAP3 default y select OMAP_PACKAGE_CBB - select REGULATOR_FIXED_VOLTAGE + select REGULATOR_FIXED_VOLTAGE if REGULATOR config MACH_OMAP3_TOUCHBOOK bool "OMAP3 Touch Book" depends on ARCH_OMAP3 default y - select BACKLIGHT_CLASS_DEVICE config MACH_OMAP_3430SDP bool "OMAP 3430 SDP board" @@ -265,7 +264,7 @@ config MACH_OMAP_ZOOM2 select SERIAL_8250 select SERIAL_CORE_CONSOLE select SERIAL_8250_CONSOLE - select REGULATOR_FIXED_VOLTAGE + select REGULATOR_FIXED_VOLTAGE if REGULATOR config MACH_OMAP_ZOOM3 bool "OMAP3630 Zoom3 board" @@ -275,7 +274,7 @@ config MACH_OMAP_ZOOM3 select SERIAL_8250 select SERIAL_CORE_CONSOLE select SERIAL_8250_CONSOLE - select REGULATOR_FIXED_VOLTAGE + select REGULATOR_FIXED_VOLTAGE if REGULATOR config MACH_CM_T35 bool "CompuLab CM-T35/CM-T3730 modules" @@ -334,7 +333,7 @@ config MACH_OMAP_4430SDP depends on ARCH_OMAP4 select OMAP_PACKAGE_CBL select OMAP_PACKAGE_CBS - select REGULATOR_FIXED_VOLTAGE + select REGULATOR_FIXED_VOLTAGE if REGULATOR config MACH_OMAP4_PANDA bool "OMAP4 Panda Board" @@ -342,7 +341,7 @@ config MACH_OMAP4_PANDA depends on ARCH_OMAP4 select OMAP_PACKAGE_CBL select OMAP_PACKAGE_CBS - select REGULATOR_FIXED_VOLTAGE + select REGULATOR_FIXED_VOLTAGE if REGULATOR config OMAP3_EMU bool "OMAP3 debugging peripherals" diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index fc9b238cbc1..bd76394ccaf 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -11,9 +11,9 @@ hwmod-common = omap_hwmod.o \ omap_hwmod_common_data.o clock-common = clock.o clock_common_data.o \ clkt_dpll.o clkt_clksel.o -secure-common = omap-smc.o omap-secure.o +secure-common = omap-smc.o omap-secure.o -obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common) $(secure-common) +obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common) obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common) obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) $(secure-common) diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 39fba9df17f..4e9071589bf 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -52,8 +52,9 @@ #define ETH_KS8851_QUART 138 #define OMAP4_SFH7741_SENSOR_OUTPUT_GPIO 184 #define OMAP4_SFH7741_ENABLE_GPIO 188 -#define HDMI_GPIO_HPD 60 /* Hot plug pin for HDMI */ +#define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */ #define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */ +#define HDMI_GPIO_HPD 63 /* Hotplug detect */ #define DISPLAY_SEL_GPIO 59 /* LCD2/PicoDLP switch */ #define DLP_POWER_ON_GPIO 40 @@ -603,8 +604,9 @@ static void __init omap_sfh7741prox_init(void) } static struct gpio sdp4430_hdmi_gpios[] = { - { HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_hpd" }, + { HDMI_GPIO_CT_CP_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ct_cp_hpd" }, { HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" }, + { HDMI_GPIO_HPD, GPIOF_DIR_IN, "hdmi_gpio_hpd" }, }; static int sdp4430_panel_enable_hdmi(struct omap_dss_device *dssdev) @@ -621,8 +623,7 @@ static int sdp4430_panel_enable_hdmi(struct omap_dss_device *dssdev) static void sdp4430_panel_disable_hdmi(struct omap_dss_device *dssdev) { - gpio_free(HDMI_GPIO_LS_OE); - gpio_free(HDMI_GPIO_HPD); + gpio_free_array(sdp4430_hdmi_gpios, ARRAY_SIZE(sdp4430_hdmi_gpios)); } static struct nokia_dsi_panel_data dsi1_panel = { @@ -738,6 +739,10 @@ static void sdp4430_lcd_init(void) pr_err("%s: Could not get lcd2_reset_gpio\n", __func__); } +static struct omap_dss_hdmi_data sdp4430_hdmi_data = { + .hpd_gpio = HDMI_GPIO_HPD, +}; + static struct omap_dss_device sdp4430_hdmi_device = { .name = "hdmi", .driver_name = "hdmi_panel", @@ -745,6 +750,7 @@ static struct omap_dss_device sdp4430_hdmi_device = { .platform_enable = sdp4430_panel_enable_hdmi, .platform_disable = sdp4430_panel_disable_hdmi, .channel = OMAP_DSS_CHANNEL_DIGIT, + .data = &sdp4430_hdmi_data, }; static struct picodlp_panel_data sdp4430_picodlp_pdata = { @@ -808,7 +814,7 @@ static struct omap_dss_board_info sdp4430_dss_data = { .default_device = &sdp4430_lcd_device, }; -static void omap_4430sdp_display_init(void) +static void __init omap_4430sdp_display_init(void) { int r; @@ -829,6 +835,10 @@ static void omap_4430sdp_display_init(void) omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP); else omap_hdmi_init(0); + + omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN); } #ifdef CONFIG_OMAP_MUX @@ -841,7 +851,7 @@ static struct omap_board_mux board_mux[] __initdata = { #define board_mux NULL #endif -static void omap4_sdp4430_wifi_mux_init(void) +static void __init omap4_sdp4430_wifi_mux_init(void) { omap_mux_init_gpio(GPIO_WIFI_IRQ, OMAP_PIN_INPUT | OMAP_PIN_OFF_WAKEUPENABLE); @@ -868,12 +878,17 @@ static struct wl12xx_platform_data omap4_sdp4430_wlan_data __initdata = { .board_tcxo_clock = WL12XX_TCXOCLOCK_26, }; -static void omap4_sdp4430_wifi_init(void) +static void __init omap4_sdp4430_wifi_init(void) { + int ret; + omap4_sdp4430_wifi_mux_init(); - if (wl12xx_set_platform_data(&omap4_sdp4430_wlan_data)) - pr_err("Error setting wl12xx data\n"); - platform_device_register(&omap_vwlan_device); + ret = wl12xx_set_platform_data(&omap4_sdp4430_wlan_data); + if (ret) + pr_err("Error setting wl12xx data: %d\n", ret); + ret = platform_device_register(&omap_vwlan_device); + if (ret) + pr_err("Error registering wl12xx device: %d\n", ret); } static void __init omap_4430sdp_init(void) diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index e921e3be24a..d73316ed420 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -437,7 +437,7 @@ static struct usbhs_omap_board_data usbhs_bdata __initdata = { .reset_gpio_port[2] = -EINVAL }; -static void cm_t35_init_usbh(void) +static void __init cm_t35_init_usbh(void) { int err; diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index d5875606048..ad497620539 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -17,6 +17,7 @@ #include <linux/i2c/twl.h> #include <mach/hardware.h> +#include <asm/hardware/gic.h> #include <asm/mach/arch.h> #include <plat/board.h> @@ -102,6 +103,7 @@ DT_MACHINE_START(OMAP242X_DT, "Generic OMAP2420 (Flattened Device Tree)") .map_io = omap242x_map_io, .init_early = omap2420_init_early, .init_irq = omap2_init_irq, + .handle_irq = omap2_intc_handle_irq, .init_machine = omap_generic_init, .timer = &omap2_timer, .dt_compat = omap242x_boards_compat, @@ -141,6 +143,7 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)") .map_io = omap3_map_io, .init_early = omap3430_init_early, .init_irq = omap3_init_irq, + .handle_irq = omap3_intc_handle_irq, .init_machine = omap3_init, .timer = &omap3_timer, .dt_compat = omap3_boards_compat, @@ -160,6 +163,7 @@ DT_MACHINE_START(OMAP4_DT, "Generic OMAP4 (Flattened Device Tree)") .map_io = omap4_map_io, .init_early = omap4430_init_early, .init_irq = gic_init_irq, + .handle_irq = gic_handle_irq, .init_machine = omap4_init, .timer = &omap4_timer, .dt_compat = omap4_boards_compat, diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 003fe34c934..c775bead149 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -617,6 +617,21 @@ static struct gpio omap3_evm_ehci_gpios[] __initdata = { { OMAP3_EVM_EHCI_SELECT, GPIOF_OUT_INIT_LOW, "select EHCI port" }, }; +static void __init omap3_evm_wl12xx_init(void) +{ +#ifdef CONFIG_WL12XX_PLATFORM_DATA + int ret; + + /* WL12xx WLAN Init */ + ret = wl12xx_set_platform_data(&omap3evm_wlan_data); + if (ret) + pr_err("error setting wl12xx data: %d\n", ret); + ret = platform_device_register(&omap3evm_wlan_regulator); + if (ret) + pr_err("error registering wl12xx device: %d\n", ret); +#endif +} + static void __init omap3_evm_init(void) { omap3_evm_get_revision(); @@ -665,13 +680,7 @@ static void __init omap3_evm_init(void) omap_ads7846_init(1, OMAP3_EVM_TS_GPIO, 310, NULL); omap3evm_init_smsc911x(); omap3_evm_display_init(); - -#ifdef CONFIG_WL12XX_PLATFORM_DATA - /* WL12xx WLAN Init */ - if (wl12xx_set_platform_data(&omap3evm_wlan_data)) - pr_err("error setting wl12xx data\n"); - platform_device_register(&omap3evm_wlan_regulator); -#endif + omap3_evm_wl12xx_init(); } MACHINE_START(OMAP3EVM, "OMAP3 EVM") diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 30ad40db2cf..28fc271f703 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -51,8 +51,9 @@ #define GPIO_HUB_NRESET 62 #define GPIO_WIFI_PMENA 43 #define GPIO_WIFI_IRQ 53 -#define HDMI_GPIO_HPD 60 /* Hot plug pin for HDMI */ +#define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */ #define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */ +#define HDMI_GPIO_HPD 63 /* Hotplug detect */ /* wl127x BT, FM, GPS connectivity chip */ static int wl1271_gpios[] = {46, -1, -1}; @@ -413,8 +414,9 @@ int __init omap4_panda_dvi_init(void) } static struct gpio panda_hdmi_gpios[] = { - { HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_hpd" }, + { HDMI_GPIO_CT_CP_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ct_cp_hpd" }, { HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" }, + { HDMI_GPIO_HPD, GPIOF_DIR_IN, "hdmi_gpio_hpd" }, }; static int omap4_panda_panel_enable_hdmi(struct omap_dss_device *dssdev) @@ -431,10 +433,13 @@ static int omap4_panda_panel_enable_hdmi(struct omap_dss_device *dssdev) static void omap4_panda_panel_disable_hdmi(struct omap_dss_device *dssdev) { - gpio_free(HDMI_GPIO_LS_OE); - gpio_free(HDMI_GPIO_HPD); + gpio_free_array(panda_hdmi_gpios, ARRAY_SIZE(panda_hdmi_gpios)); } +static struct omap_dss_hdmi_data omap4_panda_hdmi_data = { + .hpd_gpio = HDMI_GPIO_HPD, +}; + static struct omap_dss_device omap4_panda_hdmi_device = { .name = "hdmi", .driver_name = "hdmi_panel", @@ -442,6 +447,7 @@ static struct omap_dss_device omap4_panda_hdmi_device = { .platform_enable = omap4_panda_panel_enable_hdmi, .platform_disable = omap4_panda_panel_disable_hdmi, .channel = OMAP_DSS_CHANNEL_DIGIT, + .data = &omap4_panda_hdmi_data, }; static struct omap_dss_device *omap4_panda_dss_devices[] = { @@ -473,18 +479,24 @@ void omap4_panda_display_init(void) omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP); else omap_hdmi_init(0); + + omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN); } static void __init omap4_panda_init(void) { int package = OMAP_PACKAGE_CBS; + int ret; if (omap_rev() == OMAP4430_REV_ES1_0) package = OMAP_PACKAGE_CBL; omap4_mux_init(board_mux, NULL, package); - if (wl12xx_set_platform_data(&omap_panda_wlan_data)) - pr_err("error setting wl12xx data\n"); + ret = wl12xx_set_platform_data(&omap_panda_wlan_data); + if (ret) + pr_err("error setting wl12xx data: %d\n", ret); omap4_panda_i2c_init(); platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices)); diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index 8d7ce11cfea..c126461836a 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -296,8 +296,10 @@ static void enable_board_wakeup_source(void) void __init zoom_peripherals_init(void) { - if (wl12xx_set_platform_data(&omap_zoom_wlan_data)) - pr_err("error setting wl12xx data\n"); + int ret = wl12xx_set_platform_data(&omap_zoom_wlan_data); + + if (ret) + pr_err("error setting wl12xx data: %d\n", ret); omap_i2c_init(); platform_device_register(&omap_vwlan_device); diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 0b510ad01a0..283d11eae69 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -405,6 +405,7 @@ static int omap_mcspi_init(struct omap_hwmod *oh, void *unused) break; default: pr_err("Invalid McSPI Revision value\n"); + kfree(pdata); return -EINVAL; } diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index 3c446d1a178..3677b1f58b8 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -103,12 +103,8 @@ static void omap4_hdmi_mux_pads(enum omap_hdmi_flags flags) u32 reg; u16 control_i2c_1; - /* PAD0_HDMI_HPD_PAD1_HDMI_CEC */ - omap_mux_init_signal("hdmi_hpd", - OMAP_PIN_INPUT_PULLUP); omap_mux_init_signal("hdmi_cec", OMAP_PIN_INPUT_PULLUP); - /* PAD0_HDMI_DDC_SCL_PAD1_HDMI_DDC_SDA */ omap_mux_init_signal("hdmi_ddc_scl", OMAP_PIN_INPUT_PULLUP); omap_mux_init_signal("hdmi_ddc_sda", diff --git a/arch/arm/mach-omap2/emu.c b/arch/arm/mach-omap2/emu.c index 9c442e290cc..ce91aad4cda 100644 --- a/arch/arm/mach-omap2/emu.c +++ b/arch/arm/mach-omap2/emu.c @@ -30,29 +30,8 @@ MODULE_AUTHOR("Alexander Shishkin"); #define ETB_BASE (L4_EMU_34XX_PHYS + 0x1b000) #define DAPCTL (L4_EMU_34XX_PHYS + 0x1d000) -static struct amba_device omap3_etb_device = { - .dev = { - .init_name = "etb", - }, - .res = { - .start = ETB_BASE, - .end = ETB_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .periphid = 0x000bb907, -}; - -static struct amba_device omap3_etm_device = { - .dev = { - .init_name = "etm", - }, - .res = { - .start = ETM_BASE, - .end = ETM_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .periphid = 0x102bb921, -}; +static AMBA_APB_DEVICE(omap3_etb, "etb", 0x000bb907, ETB_BASE, { }, NULL); +static AMBA_APB_DEVICE(omap3_etm, "etm", 0x102bb921, ETM_BASE, { }, NULL); static int __init emu_init(void) { @@ -66,4 +45,3 @@ static int __init emu_init(void) } subsys_initcall(emu_init); - diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 130034bf01d..dfffbbf4c00 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -528,7 +528,13 @@ int gpmc_cs_configure(int cs, int cmd, int wval) case GPMC_CONFIG_DEV_SIZE: regval = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); + + /* clear 2 target bits */ + regval &= ~GPMC_CONFIG1_DEVICESIZE(3); + + /* set the proper value */ regval |= GPMC_CONFIG1_DEVICESIZE(wval); + gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, regval); break; diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index bd844af13af..b40c2889529 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -175,14 +175,15 @@ static void hsmmc2_select_input_clk_src(struct omap_mmc_platform_data *mmc) { u32 reg; - if (mmc->slots[0].internal_clock) { - reg = omap_ctrl_readl(control_devconf1_offset); + reg = omap_ctrl_readl(control_devconf1_offset); + if (mmc->slots[0].internal_clock) reg |= OMAP2_MMCSDIO2ADPCLKISEL; - omap_ctrl_writel(reg, control_devconf1_offset); - } + else + reg &= ~OMAP2_MMCSDIO2ADPCLKISEL; + omap_ctrl_writel(reg, control_devconf1_offset); } -static void hsmmc23_before_set_reg(struct device *dev, int slot, +static void hsmmc2_before_set_reg(struct device *dev, int slot, int power_on, int vdd) { struct omap_mmc_platform_data *mmc = dev->platform_data; @@ -292,8 +293,8 @@ static inline void omap_hsmmc_mux(struct omap_mmc_platform_data *mmc_controller, } } -static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, - struct omap_mmc_platform_data *mmc) +static int omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, + struct omap_mmc_platform_data *mmc) { char *hc_name; @@ -407,14 +408,13 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, c->caps &= ~MMC_CAP_8_BIT_DATA; c->caps |= MMC_CAP_4_BIT_DATA; } - /* FALLTHROUGH */ - case 3: if (mmc->slots[0].features & HSMMC_HAS_PBIAS) { /* off-chip level shifting, or none */ - mmc->slots[0].before_set_reg = hsmmc23_before_set_reg; + mmc->slots[0].before_set_reg = hsmmc2_before_set_reg; mmc->slots[0].after_set_reg = NULL; } break; + case 3: case 4: case 5: mmc->slots[0].before_set_reg = NULL; @@ -430,7 +430,7 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, #define MAX_OMAP_MMC_HWMOD_NAME_LEN 16 -void __init omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr) +void omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr) { struct omap_hwmod *oh; struct platform_device *pdev; @@ -487,7 +487,7 @@ done: kfree(mmc_data); } -void __init omap2_hsmmc_init(struct omap2_hsmmc_info *controllers) +void omap2_hsmmc_init(struct omap2_hsmmc_info *controllers) { u32 reg; diff --git a/arch/arm/mach-omap2/include/mach/system.h b/arch/arm/mach-omap2/include/mach/system.h deleted file mode 100644 index d488721ab90..00000000000 --- a/arch/arm/mach-omap2/include/mach/system.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * arch/arm/mach-omap2/include/mach/system.h - */ - -#include <plat/system.h> diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 3f174d51f67..eb50c29fb64 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -388,7 +388,7 @@ static void __init omap_hwmod_init_postsetup(void) omap_pm_if_early_init(); } -#ifdef CONFIG_ARCH_OMAP2 +#ifdef CONFIG_SOC_OMAP2420 void __init omap2420_init_early(void) { omap2_set_globals_242x(); @@ -400,7 +400,9 @@ void __init omap2420_init_early(void) omap_hwmod_init_postsetup(); omap2420_clk_init(); } +#endif +#ifdef CONFIG_SOC_OMAP2430 void __init omap2430_init_early(void) { omap2_set_globals_243x(); diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index e1cc75d1a57..fb8bc9fa43b 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -100,8 +100,8 @@ void omap_mux_write_array(struct omap_mux_partition *partition, static char *omap_mux_options; -static int __init _omap_mux_init_gpio(struct omap_mux_partition *partition, - int gpio, int val) +static int _omap_mux_init_gpio(struct omap_mux_partition *partition, + int gpio, int val) { struct omap_mux_entry *e; struct omap_mux *gpio_mux = NULL; @@ -145,7 +145,7 @@ static int __init _omap_mux_init_gpio(struct omap_mux_partition *partition, return 0; } -int __init omap_mux_init_gpio(int gpio, int val) +int omap_mux_init_gpio(int gpio, int val) { struct omap_mux_partition *partition; int ret; @@ -159,9 +159,9 @@ int __init omap_mux_init_gpio(int gpio, int val) return -ENODEV; } -static int __init _omap_mux_get_by_name(struct omap_mux_partition *partition, - const char *muxname, - struct omap_mux **found_mux) +static int _omap_mux_get_by_name(struct omap_mux_partition *partition, + const char *muxname, + struct omap_mux **found_mux) { struct omap_mux *mux = NULL; struct omap_mux_entry *e; @@ -240,7 +240,7 @@ omap_mux_get_by_name(const char *muxname, return -ENODEV; } -int __init omap_mux_init_signal(const char *muxname, int val) +int omap_mux_init_signal(const char *muxname, int val) { struct omap_mux_partition *partition = NULL; struct omap_mux *mux = NULL; @@ -1094,8 +1094,8 @@ static void omap_mux_init_package(struct omap_mux *superset, omap_mux_package_init_balls(package_balls, superset); } -static void omap_mux_init_signals(struct omap_mux_partition *partition, - struct omap_board_mux *board_mux) +static void __init omap_mux_init_signals(struct omap_mux_partition *partition, + struct omap_board_mux *board_mux) { omap_mux_set_cmdline_signals(); omap_mux_write_array(partition, board_mux); @@ -1109,8 +1109,8 @@ static void omap_mux_init_package(struct omap_mux *superset, { } -static void omap_mux_init_signals(struct omap_mux_partition *partition, - struct omap_board_mux *board_mux) +static void __init omap_mux_init_signals(struct omap_mux_partition *partition, + struct omap_board_mux *board_mux) { } diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S index b13ef7ef5ef..503ac777a2b 100644 --- a/arch/arm/mach-omap2/omap-headsmp.S +++ b/arch/arm/mach-omap2/omap-headsmp.S @@ -18,6 +18,7 @@ #include <linux/linkage.h> #include <linux/init.h> + __CPUINIT /* * OMAP4 specific entry point for secondary CPU to jump from ROM * code. This routine also provides a holding flag into which diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 5192cabb40e..eba6cd3816f 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1517,8 +1517,8 @@ static int _enable(struct omap_hwmod *oh) if (oh->_state != _HWMOD_STATE_INITIALIZED && oh->_state != _HWMOD_STATE_IDLE && oh->_state != _HWMOD_STATE_DISABLED) { - WARN(1, "omap_hwmod: %s: enabled state can only be entered " - "from initialized, idle, or disabled state\n", oh->name); + WARN(1, "omap_hwmod: %s: enabled state can only be entered from initialized, idle, or disabled state\n", + oh->name); return -EINVAL; } @@ -1600,8 +1600,8 @@ static int _idle(struct omap_hwmod *oh) pr_debug("omap_hwmod: %s: idling\n", oh->name); if (oh->_state != _HWMOD_STATE_ENABLED) { - WARN(1, "omap_hwmod: %s: idle state can only be entered from " - "enabled state\n", oh->name); + WARN(1, "omap_hwmod: %s: idle state can only be entered from enabled state\n", + oh->name); return -EINVAL; } @@ -1682,8 +1682,8 @@ static int _shutdown(struct omap_hwmod *oh) if (oh->_state != _HWMOD_STATE_IDLE && oh->_state != _HWMOD_STATE_ENABLED) { - WARN(1, "omap_hwmod: %s: disabled state can only be entered " - "from idle, or enabled state\n", oh->name); + WARN(1, "omap_hwmod: %s: disabled state can only be entered from idle, or enabled state\n", + oh->name); return -EINVAL; } @@ -2240,8 +2240,8 @@ void omap_hwmod_ocp_barrier(struct omap_hwmod *oh) BUG_ON(!oh); if (!oh->class->sysc || !oh->class->sysc->sysc_flags) { - WARN(1, "omap_device: %s: OCP barrier impossible due to " - "device configuration\n", oh->name); + WARN(1, "omap_device: %s: OCP barrier impossible due to device configuration\n", + oh->name); return; } diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c index c11273da5dc..f08e442af39 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c @@ -56,27 +56,6 @@ struct omap_hwmod_class omap2_dss_hwmod_class = { }; /* - * 'dispc' class - * display controller - */ - -static struct omap_hwmod_class_sysconfig omap2_dispc_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE | - SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -struct omap_hwmod_class omap2_dispc_hwmod_class = { - .name = "dispc", - .sysc = &omap2_dispc_sysc, -}; - -/* * 'rfbi' class * remote frame buffer interface */ diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c index 177dee20fae..2a6729741b0 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c @@ -28,6 +28,28 @@ struct omap_hwmod_dma_info omap2xxx_dss_sdma_chs[] = { { .name = "dispc", .dma_req = 5 }, { .dma_req = -1 } }; + +/* + * 'dispc' class + * display controller + */ + +static struct omap_hwmod_class_sysconfig omap2_dispc_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE | + SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +struct omap_hwmod_class omap2_dispc_hwmod_class = { + .name = "dispc", + .sysc = &omap2_dispc_sysc, +}; + /* OMAP2xxx Timer Common */ static struct omap_hwmod_class_sysconfig omap2xxx_timer_sysc = { .rev_offs = 0x0000, diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 5324e8d93bc..3c8dd928628 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -1480,6 +1480,28 @@ static struct omap_hwmod omap3xxx_dss_core_hwmod = { .masters_cnt = ARRAY_SIZE(omap3xxx_dss_masters), }; +/* + * 'dispc' class + * display controller + */ + +static struct omap_hwmod_class_sysconfig omap3_dispc_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE | + SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE | + SYSC_HAS_ENAWAKEUP), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap3_dispc_hwmod_class = { + .name = "dispc", + .sysc = &omap3_dispc_sysc, +}; + /* l4_core -> dss_dispc */ static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_dispc = { .master = &omap3xxx_l4_core_hwmod, @@ -1503,7 +1525,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_dispc_slaves[] = { static struct omap_hwmod omap3xxx_dss_dispc_hwmod = { .name = "dss_dispc", - .class = &omap2_dispc_hwmod_class, + .class = &omap3_dispc_hwmod_class, .mpu_irqs = omap2_dispc_irqs, .main_clk = "dss1_alwon_fck", .prcm = { @@ -3523,12 +3545,6 @@ static __initdata struct omap_hwmod *omap3xxx_hwmods[] = { &omap3xxx_uart2_hwmod, &omap3xxx_uart3_hwmod, - /* dss class */ - &omap3xxx_dss_dispc_hwmod, - &omap3xxx_dss_dsi1_hwmod, - &omap3xxx_dss_rfbi_hwmod, - &omap3xxx_dss_venc_hwmod, - /* i2c class */ &omap3xxx_i2c1_hwmod, &omap3xxx_i2c2_hwmod, @@ -3635,6 +3651,15 @@ static __initdata struct omap_hwmod *am35xx_hwmods[] = { NULL }; +static __initdata struct omap_hwmod *omap3xxx_dss_hwmods[] = { + /* dss class */ + &omap3xxx_dss_dispc_hwmod, + &omap3xxx_dss_dsi1_hwmod, + &omap3xxx_dss_rfbi_hwmod, + &omap3xxx_dss_venc_hwmod, + NULL +}; + int __init omap3xxx_hwmod_init(void) { int r; @@ -3708,6 +3733,21 @@ int __init omap3xxx_hwmod_init(void) if (h) r = omap_hwmod_register(h); + if (r < 0) + return r; + + /* + * DSS code presumes that dss_core hwmod is handled first, + * _before_ any other DSS related hwmods so register common + * DSS hwmods last to ensure that dss_core is already registered. + * Otherwise some change things may happen, for ex. if dispc + * is handled before dss_core and DSS is enabled in bootloader + * DIPSC will be reset with outputs enabled which sometimes leads + * to unrecoverable L3 error. + * XXX The long-term fix to this is to ensure modules are set up + * in dependency order in the hwmod core code. + */ + r = omap_hwmod_register(omap3xxx_dss_hwmods); return r; } diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index f9f15108176..ef0524c10a8 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -1031,6 +1031,7 @@ static struct omap_hwmod_dma_info omap44xx_dmic_sdma_reqs[] = { static struct omap_hwmod_addr_space omap44xx_dmic_addrs[] = { { + .name = "mpu", .pa_start = 0x4012e000, .pa_end = 0x4012e07f, .flags = ADDR_TYPE_RT @@ -1049,6 +1050,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__dmic = { static struct omap_hwmod_addr_space omap44xx_dmic_dma_addrs[] = { { + .name = "dma", .pa_start = 0x4902e000, .pa_end = 0x4902e07f, .flags = ADDR_TYPE_RT diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index b8822f8b289..a4eb5c28043 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -82,13 +82,7 @@ static int omap2_fclks_active(void) f1 = omap2_cm_read_mod_reg(CORE_MOD, CM_FCLKEN1); f2 = omap2_cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2); - /* Ignore UART clocks. These are handled by UART core (serial.c) */ - f1 &= ~(OMAP24XX_EN_UART1_MASK | OMAP24XX_EN_UART2_MASK); - f2 &= ~OMAP24XX_EN_UART3_MASK; - - if (f1 | f2) - return 1; - return 0; + return (f1 | f2) ? 1 : 0; } static void omap2_enter_full_retention(void) @@ -232,7 +226,6 @@ static int omap2_can_sleep(void) static void omap2_pm_idle(void) { - local_irq_disable(); local_fiq_disable(); if (!omap2_can_sleep()) { @@ -249,7 +242,6 @@ static void omap2_pm_idle(void) out: local_fiq_enable(); - local_irq_enable(); } #ifdef CONFIG_SUSPEND @@ -468,7 +460,7 @@ static int __init omap2_pm_init(void) } suspend_set_ops(&omap_pm_ops); - pm_idle = omap2_pm_idle; + arm_pm_idle = omap2_pm_idle; return 0; } diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index fc698757892..b77df735fa6 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -418,10 +418,9 @@ void omap_sram_idle(void) static void omap3_pm_idle(void) { - local_irq_disable(); local_fiq_disable(); - if (omap_irq_pending() || need_resched()) + if (omap_irq_pending()) goto out; trace_power_start(POWER_CSTATE, 1, smp_processor_id()); @@ -434,7 +433,6 @@ static void omap3_pm_idle(void) out: local_fiq_enable(); - local_irq_enable(); } #ifdef CONFIG_SUSPEND @@ -848,7 +846,7 @@ static int __init omap3_pm_init(void) suspend_set_ops(&omap_pm_ops); #endif /* CONFIG_SUSPEND */ - pm_idle = omap3_pm_idle; + arm_pm_idle = omap3_pm_idle; omap3_idle_init(); /* diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c index c264ef7219c..c840689df24 100644 --- a/arch/arm/mach-omap2/pm44xx.c +++ b/arch/arm/mach-omap2/pm44xx.c @@ -173,18 +173,16 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused) * omap_default_idle - OMAP4 default ilde routine.' * * Implements OMAP4 memory, IO ordering requirements which can't be addressed - * with default arch_idle() hook. Used by all CPUs with !CONFIG_CPUIDLE and + * with default cpu_do_idle() hook. Used by all CPUs with !CONFIG_CPUIDLE and * by secondary CPU with CONFIG_CPUIDLE. */ static void omap_default_idle(void) { - local_irq_disable(); local_fiq_disable(); omap_do_wfi(); local_fiq_enable(); - local_irq_enable(); } /** @@ -255,8 +253,8 @@ static int __init omap4_pm_init(void) suspend_set_ops(&omap_pm_ops); #endif /* CONFIG_SUSPEND */ - /* Overwrite the default arch_idle() */ - pm_idle = omap_default_idle; + /* Overwrite the default cpu_do_idle() */ + arm_pm_idle = omap_default_idle; omap4_idle_init(); diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c index c1c4d86a79a..9ce765407ad 100644 --- a/arch/arm/mach-omap2/prm2xxx_3xxx.c +++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c @@ -19,6 +19,7 @@ #include "common.h" #include <plat/cpu.h> #include <plat/prcm.h> +#include <plat/irqs.h> #include "vp.h" diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c index 33dd655e6aa..a1d6154dc12 100644 --- a/arch/arm/mach-omap2/prm44xx.c +++ b/arch/arm/mach-omap2/prm44xx.c @@ -19,6 +19,7 @@ #include "common.h" #include <plat/cpu.h> +#include <plat/irqs.h> #include <plat/prcm.h> #include "vp.h" diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c index 860118ab43e..873b51d494e 100644 --- a/arch/arm/mach-omap2/prm_common.c +++ b/arch/arm/mach-omap2/prm_common.c @@ -24,7 +24,6 @@ #include <linux/interrupt.h> #include <linux/slab.h> -#include <mach/system.h> #include <plat/common.h> #include <plat/prcm.h> #include <plat/irqs.h> diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 247d89478f2..f590afc1f67 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -107,18 +107,18 @@ static void omap_uart_set_noidle(struct platform_device *pdev) omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_NO); } -static void omap_uart_set_forceidle(struct platform_device *pdev) +static void omap_uart_set_smartidle(struct platform_device *pdev) { struct omap_device *od = to_omap_device(pdev); - omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_FORCE); + omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_SMART); } #else static void omap_uart_enable_wakeup(struct platform_device *pdev, bool enable) {} static void omap_uart_set_noidle(struct platform_device *pdev) {} -static void omap_uart_set_forceidle(struct platform_device *pdev) {} +static void omap_uart_set_smartidle(struct platform_device *pdev) {} #endif /* CONFIG_PM */ #ifdef CONFIG_OMAP_MUX @@ -349,7 +349,7 @@ void __init omap_serial_init_port(struct omap_board_data *bdata, omap_up.uartclk = OMAP24XX_BASE_BAUD * 16; omap_up.flags = UPF_BOOT_AUTOCONF; omap_up.get_context_loss_count = omap_pm_get_dev_context_loss_count; - omap_up.set_forceidle = omap_uart_set_forceidle; + omap_up.set_forceidle = omap_uart_set_smartidle; omap_up.set_noidle = omap_uart_set_noidle; omap_up.enable_wakeup = omap_uart_enable_wakeup; omap_up.dma_rx_buf_size = info->dma_rx_buf_size; diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c index 9dd93453e56..7e755bb0ffc 100644 --- a/arch/arm/mach-omap2/smartreflex.c +++ b/arch/arm/mach-omap2/smartreflex.c @@ -897,7 +897,7 @@ static int __init omap_sr_probe(struct platform_device *pdev) ret = sr_late_init(sr_info); if (ret) { pr_warning("%s: Error in SR late init\n", __func__); - return ret; + goto err_iounmap; } } diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 6eeff0e0ae0..5c9acea9576 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -270,7 +270,7 @@ static struct clocksource clocksource_gpt = { static u32 notrace dmtimer_read_sched_clock(void) { if (clksrc.reserved) - return __omap_dm_timer_read_counter(clksrc.io_base, 1); + return __omap_dm_timer_read_counter(&clksrc, 1); return 0; } diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c index 031d116fbf1..175b7d86d86 100644 --- a/arch/arm/mach-omap2/vc.c +++ b/arch/arm/mach-omap2/vc.c @@ -247,7 +247,7 @@ static void __init omap4_vc_init_channel(struct voltagedomain *voltdm) * omap_vc_i2c_init - initialize I2C interface to PMIC * @voltdm: voltage domain containing VC data * - * Use PMIC supplied seetings for I2C high-speed mode and + * Use PMIC supplied settings for I2C high-speed mode and * master code (if set) and program the VC I2C configuration * register. * @@ -265,8 +265,8 @@ static void __init omap_vc_i2c_init(struct voltagedomain *voltdm) if (initialized) { if (voltdm->pmic->i2c_high_speed != i2c_high_speed) - pr_warn("%s: I2C config for all channels must match.", - __func__); + pr_warn("%s: I2C config for vdd_%s does not match other channels (%u).", + __func__, voltdm->name, i2c_high_speed); return; } @@ -292,9 +292,7 @@ void __init omap_vc_init_channel(struct voltagedomain *voltdm) u32 val; if (!voltdm->pmic || !voltdm->pmic->uv_to_vsel) { - pr_err("%s: PMIC info requried to configure vc for" - "vdd_%s not populated.Hence cannot initialize vc\n", - __func__, voltdm->name); + pr_err("%s: No PMIC info for vdd_%s\n", __func__, voltdm->name); return; } diff --git a/arch/arm/mach-omap2/vp.c b/arch/arm/mach-omap2/vp.c index 807391d84a9..0df88820978 100644 --- a/arch/arm/mach-omap2/vp.c +++ b/arch/arm/mach-omap2/vp.c @@ -41,6 +41,11 @@ void __init omap_vp_init(struct voltagedomain *voltdm) u32 val, sys_clk_rate, timeout, waittime; u32 vddmin, vddmax, vstepmin, vstepmax; + if (!voltdm->pmic || !voltdm->pmic->uv_to_vsel) { + pr_err("%s: No PMIC info for vdd_%s\n", __func__, voltdm->name); + return; + } + if (!voltdm->read || !voltdm->write) { pr_err("%s: No read/write API for accessing vdd_%s regs\n", __func__, voltdm->name); diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index 0e28bae20bd..5dad38ec00e 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -29,6 +29,7 @@ #include <mach/hardware.h> #include <mach/orion5x.h> #include <plat/orion_nand.h> +#include <plat/ehci-orion.h> #include <plat/time.h> #include <plat/common.h> #include <plat/addr-map.h> @@ -72,7 +73,8 @@ void __init orion5x_map_io(void) ****************************************************************************/ void __init orion5x_ehci0_init(void) { - orion_ehci_init(ORION5X_USB0_PHYS_BASE, IRQ_ORION5X_USB0_CTRL); + orion_ehci_init(ORION5X_USB0_PHYS_BASE, IRQ_ORION5X_USB0_CTRL, + EHCI_PHY_ORION); } diff --git a/arch/arm/mach-orion5x/include/mach/system.h b/arch/arm/mach-orion5x/include/mach/system.h deleted file mode 100644 index 825a2650cef..00000000000 --- a/arch/arm/mach-orion5x/include/mach/system.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-orion5x/include/mach/system.h - * - * Tzachi Perelstein <tzachi@marvell.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/mach-picoxcell/include/mach/system.h b/arch/arm/mach-picoxcell/include/mach/system.h deleted file mode 100644 index 1a5d8cb57df..00000000000 --- a/arch/arm/mach-picoxcell/include/mach/system.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * Copyright (c) 2011 Picochip Ltd., Jamie Iles - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static inline void arch_idle(void) -{ - /* - * This should do all the clock switching and wait for interrupt - * tricks. - */ - cpu_do_idle(); -} - -#endif /* __ASM_ARCH_SYSTEM_H */ diff --git a/arch/arm/mach-pnx4008/include/mach/system.h b/arch/arm/mach-pnx4008/include/mach/system.h deleted file mode 100644 index 60cfe718809..00000000000 --- a/arch/arm/mach-pnx4008/include/mach/system.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * arch/arm/mach-pnx4008/include/mach/system.h - * - * Copyright (C) 2003 Philips Semiconductors - * Copyright (C) 2005 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static void arch_idle(void) -{ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/mach-prima2/include/mach/system.h b/arch/arm/mach-prima2/include/mach/system.h deleted file mode 100644 index 2c7d2a9d0c9..00000000000 --- a/arch/arm/mach-prima2/include/mach/system.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * arch/arm/mach-prima2/include/mach/system.h - * - * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. - * - * Licensed under GPLv2 or later. - */ - -#ifndef __MACH_SYSTEM_H__ -#define __MACH_SYSTEM_H__ - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/mach-pxa/include/mach/system.h b/arch/arm/mach-pxa/include/mach/system.h deleted file mode 100644 index c5afacd3cc0..00000000000 --- a/arch/arm/mach-pxa/include/mach/system.h +++ /dev/null @@ -1,15 +0,0 @@ -/* - * arch/arm/mach-pxa/include/mach/system.h - * - * Author: Nicolas Pitre - * Created: Jun 15, 2001 - * Copyright: MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -static inline void arch_idle(void) -{ - cpu_do_idle(); -} diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h index 735b57aaf2d..f8f2c0ac4c0 100644 --- a/arch/arm/mach-realview/core.h +++ b/arch/arm/mach-realview/core.h @@ -28,21 +28,11 @@ #include <asm/setup.h> #include <asm/leds.h> -#define AMBA_DEVICE(name,busid,base,plat) \ -static struct amba_device name##_device = { \ - .dev = { \ - .coherent_dma_mask = ~0, \ - .init_name = busid, \ - .platform_data = plat, \ - }, \ - .res = { \ - .start = REALVIEW_##base##_BASE, \ - .end = (REALVIEW_##base##_BASE) + SZ_4K - 1, \ - .flags = IORESOURCE_MEM, \ - }, \ - .dma_mask = ~0, \ - .irq = base##_IRQ, \ -} +#define APB_DEVICE(name, busid, base, plat) \ +static AMBA_APB_DEVICE(name, busid, 0, REALVIEW_##base##_BASE, base##_IRQ, plat) + +#define AHB_DEVICE(name, busid, base, plat) \ +static AMBA_AHB_DEVICE(name, busid, 0, REALVIEW_##base##_BASE, base##_IRQ, plat) struct machine_desc; diff --git a/arch/arm/mach-realview/include/mach/irqs-pb1176.h b/arch/arm/mach-realview/include/mach/irqs-pb1176.h index 5c3c625e3e0..708f84156f2 100644 --- a/arch/arm/mach-realview/include/mach/irqs-pb1176.h +++ b/arch/arm/mach-realview/include/mach/irqs-pb1176.h @@ -40,6 +40,7 @@ #define IRQ_DC1176_L2CC (IRQ_DC1176_GIC_START + 13) #define IRQ_DC1176_RTC (IRQ_DC1176_GIC_START + 14) #define IRQ_DC1176_CLCD (IRQ_DC1176_GIC_START + 15) /* CLCD controller */ +#define IRQ_DC1176_GPIO0 (IRQ_DC1176_GIC_START + 16) #define IRQ_DC1176_SSP (IRQ_DC1176_GIC_START + 17) /* SSP port */ #define IRQ_DC1176_UART0 (IRQ_DC1176_GIC_START + 18) /* UART 0 on development chip */ #define IRQ_DC1176_UART1 (IRQ_DC1176_GIC_START + 19) /* UART 1 on development chip */ @@ -73,7 +74,6 @@ #define IRQ_PB1176_DMAC (IRQ_PB1176_GIC_START + 24) /* DMA controller */ #define IRQ_PB1176_RTC (IRQ_PB1176_GIC_START + 25) /* Real Time Clock */ -#define IRQ_PB1176_GPIO0 -1 #define IRQ_PB1176_SCTL -1 #define NR_GIC_PB1176 2 diff --git a/arch/arm/mach-realview/include/mach/system.h b/arch/arm/mach-realview/include/mach/system.h deleted file mode 100644 index 471b671159c..00000000000 --- a/arch/arm/mach-realview/include/mach/system.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * arch/arm/mach-realview/include/mach/system.h - * - * Copyright (C) 2003 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static inline void arch_idle(void) -{ - /* - * This should do all the clock switching - * and wait for interrupt tricks - */ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index 9578145f2df..157e1bc6e83 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -135,63 +135,63 @@ static struct pl022_ssp_controller ssp0_plat_data = { /* * These devices are connected via the core APB bridge */ -#define GPIO2_IRQ { IRQ_EB_GPIO2, NO_IRQ } -#define GPIO3_IRQ { IRQ_EB_GPIO3, NO_IRQ } +#define GPIO2_IRQ { IRQ_EB_GPIO2 } +#define GPIO3_IRQ { IRQ_EB_GPIO3 } -#define AACI_IRQ { IRQ_EB_AACI, NO_IRQ } +#define AACI_IRQ { IRQ_EB_AACI } #define MMCI0_IRQ { IRQ_EB_MMCI0A, IRQ_EB_MMCI0B } -#define KMI0_IRQ { IRQ_EB_KMI0, NO_IRQ } -#define KMI1_IRQ { IRQ_EB_KMI1, NO_IRQ } +#define KMI0_IRQ { IRQ_EB_KMI0 } +#define KMI1_IRQ { IRQ_EB_KMI1 } /* * These devices are connected directly to the multi-layer AHB switch */ -#define EB_SMC_IRQ { NO_IRQ, NO_IRQ } -#define MPMC_IRQ { NO_IRQ, NO_IRQ } -#define EB_CLCD_IRQ { IRQ_EB_CLCD, NO_IRQ } -#define DMAC_IRQ { IRQ_EB_DMA, NO_IRQ } +#define EB_SMC_IRQ { } +#define MPMC_IRQ { } +#define EB_CLCD_IRQ { IRQ_EB_CLCD } +#define DMAC_IRQ { IRQ_EB_DMA } /* * These devices are connected via the core APB bridge */ -#define SCTL_IRQ { NO_IRQ, NO_IRQ } -#define EB_WATCHDOG_IRQ { IRQ_EB_WDOG, NO_IRQ } -#define EB_GPIO0_IRQ { IRQ_EB_GPIO0, NO_IRQ } -#define GPIO1_IRQ { IRQ_EB_GPIO1, NO_IRQ } -#define EB_RTC_IRQ { IRQ_EB_RTC, NO_IRQ } +#define SCTL_IRQ { } +#define EB_WATCHDOG_IRQ { IRQ_EB_WDOG } +#define EB_GPIO0_IRQ { IRQ_EB_GPIO0 } +#define GPIO1_IRQ { IRQ_EB_GPIO1 } +#define EB_RTC_IRQ { IRQ_EB_RTC } /* * These devices are connected via the DMA APB bridge */ -#define SCI_IRQ { IRQ_EB_SCI, NO_IRQ } -#define EB_UART0_IRQ { IRQ_EB_UART0, NO_IRQ } -#define EB_UART1_IRQ { IRQ_EB_UART1, NO_IRQ } -#define EB_UART2_IRQ { IRQ_EB_UART2, NO_IRQ } -#define EB_UART3_IRQ { IRQ_EB_UART3, NO_IRQ } -#define EB_SSP_IRQ { IRQ_EB_SSP, NO_IRQ } +#define SCI_IRQ { IRQ_EB_SCI } +#define EB_UART0_IRQ { IRQ_EB_UART0 } +#define EB_UART1_IRQ { IRQ_EB_UART1 } +#define EB_UART2_IRQ { IRQ_EB_UART2 } +#define EB_UART3_IRQ { IRQ_EB_UART3 } +#define EB_SSP_IRQ { IRQ_EB_SSP } /* FPGA Primecells */ -AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL); -AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data); -AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL); -AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL); -AMBA_DEVICE(uart3, "fpga:uart3", EB_UART3, NULL); +APB_DEVICE(aaci, "fpga:aaci", AACI, NULL); +APB_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data); +APB_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL); +APB_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL); +APB_DEVICE(uart3, "fpga:uart3", EB_UART3, NULL); /* DevChip Primecells */ -AMBA_DEVICE(smc, "dev:smc", EB_SMC, NULL); -AMBA_DEVICE(clcd, "dev:clcd", EB_CLCD, &clcd_plat_data); -AMBA_DEVICE(dmac, "dev:dmac", DMAC, NULL); -AMBA_DEVICE(sctl, "dev:sctl", SCTL, NULL); -AMBA_DEVICE(wdog, "dev:wdog", EB_WATCHDOG, NULL); -AMBA_DEVICE(gpio0, "dev:gpio0", EB_GPIO0, &gpio0_plat_data); -AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data); -AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data); -AMBA_DEVICE(rtc, "dev:rtc", EB_RTC, NULL); -AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL); -AMBA_DEVICE(uart0, "dev:uart0", EB_UART0, NULL); -AMBA_DEVICE(uart1, "dev:uart1", EB_UART1, NULL); -AMBA_DEVICE(uart2, "dev:uart2", EB_UART2, NULL); -AMBA_DEVICE(ssp0, "dev:ssp0", EB_SSP, &ssp0_plat_data); +AHB_DEVICE(smc, "dev:smc", EB_SMC, NULL); +AHB_DEVICE(clcd, "dev:clcd", EB_CLCD, &clcd_plat_data); +AHB_DEVICE(dmac, "dev:dmac", DMAC, NULL); +AHB_DEVICE(sctl, "dev:sctl", SCTL, NULL); +APB_DEVICE(wdog, "dev:wdog", EB_WATCHDOG, NULL); +APB_DEVICE(gpio0, "dev:gpio0", EB_GPIO0, &gpio0_plat_data); +APB_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data); +APB_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data); +APB_DEVICE(rtc, "dev:rtc", EB_RTC, NULL); +APB_DEVICE(sci0, "dev:sci0", SCI, NULL); +APB_DEVICE(uart0, "dev:uart0", EB_UART0, NULL); +APB_DEVICE(uart1, "dev:uart1", EB_UART1, NULL); +APB_DEVICE(uart2, "dev:uart2", EB_UART2, NULL); +APB_DEVICE(ssp0, "dev:ssp0", EB_SSP, &ssp0_plat_data); static struct amba_device *amba_devs[] __initdata = { &dmac_device, diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c index e4abe94fb11..b1d7cafa1a6 100644 --- a/arch/arm/mach-realview/realview_pb1176.c +++ b/arch/arm/mach-realview/realview_pb1176.c @@ -132,50 +132,50 @@ static struct pl022_ssp_controller ssp0_plat_data = { /* * RealView PB1176 AMBA devices */ -#define GPIO2_IRQ { IRQ_PB1176_GPIO2, NO_IRQ } -#define GPIO3_IRQ { IRQ_PB1176_GPIO3, NO_IRQ } -#define AACI_IRQ { IRQ_PB1176_AACI, NO_IRQ } +#define GPIO2_IRQ { IRQ_PB1176_GPIO2 } +#define GPIO3_IRQ { IRQ_PB1176_GPIO3 } +#define AACI_IRQ { IRQ_PB1176_AACI } #define MMCI0_IRQ { IRQ_PB1176_MMCI0A, IRQ_PB1176_MMCI0B } -#define KMI0_IRQ { IRQ_PB1176_KMI0, NO_IRQ } -#define KMI1_IRQ { IRQ_PB1176_KMI1, NO_IRQ } -#define PB1176_SMC_IRQ { NO_IRQ, NO_IRQ } -#define MPMC_IRQ { NO_IRQ, NO_IRQ } -#define PB1176_CLCD_IRQ { IRQ_DC1176_CLCD, NO_IRQ } -#define SCTL_IRQ { NO_IRQ, NO_IRQ } -#define PB1176_WATCHDOG_IRQ { IRQ_DC1176_WATCHDOG, NO_IRQ } -#define PB1176_GPIO0_IRQ { IRQ_PB1176_GPIO0, NO_IRQ } -#define GPIO1_IRQ { IRQ_PB1176_GPIO1, NO_IRQ } -#define PB1176_RTC_IRQ { IRQ_DC1176_RTC, NO_IRQ } -#define SCI_IRQ { IRQ_PB1176_SCI, NO_IRQ } -#define PB1176_UART0_IRQ { IRQ_DC1176_UART0, NO_IRQ } -#define PB1176_UART1_IRQ { IRQ_DC1176_UART1, NO_IRQ } -#define PB1176_UART2_IRQ { IRQ_DC1176_UART2, NO_IRQ } -#define PB1176_UART3_IRQ { IRQ_DC1176_UART3, NO_IRQ } -#define PB1176_UART4_IRQ { IRQ_PB1176_UART4, NO_IRQ } -#define PB1176_SSP_IRQ { IRQ_DC1176_SSP, NO_IRQ } +#define KMI0_IRQ { IRQ_PB1176_KMI0 } +#define KMI1_IRQ { IRQ_PB1176_KMI1 } +#define PB1176_SMC_IRQ { } +#define MPMC_IRQ { } +#define PB1176_CLCD_IRQ { IRQ_DC1176_CLCD } +#define SCTL_IRQ { } +#define PB1176_WATCHDOG_IRQ { IRQ_DC1176_WATCHDOG } +#define PB1176_GPIO0_IRQ { IRQ_DC1176_GPIO0 } +#define GPIO1_IRQ { IRQ_PB1176_GPIO1 } +#define PB1176_RTC_IRQ { IRQ_DC1176_RTC } +#define SCI_IRQ { IRQ_PB1176_SCI } +#define PB1176_UART0_IRQ { IRQ_DC1176_UART0 } +#define PB1176_UART1_IRQ { IRQ_DC1176_UART1 } +#define PB1176_UART2_IRQ { IRQ_DC1176_UART2 } +#define PB1176_UART3_IRQ { IRQ_DC1176_UART3 } +#define PB1176_UART4_IRQ { IRQ_PB1176_UART4 } +#define PB1176_SSP_IRQ { IRQ_DC1176_SSP } /* FPGA Primecells */ -AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL); -AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data); -AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL); -AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL); -AMBA_DEVICE(uart4, "fpga:uart4", PB1176_UART4, NULL); +APB_DEVICE(aaci, "fpga:aaci", AACI, NULL); +APB_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data); +APB_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL); +APB_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL); +APB_DEVICE(uart4, "fpga:uart4", PB1176_UART4, NULL); /* DevChip Primecells */ -AMBA_DEVICE(smc, "dev:smc", PB1176_SMC, NULL); -AMBA_DEVICE(sctl, "dev:sctl", SCTL, NULL); -AMBA_DEVICE(wdog, "dev:wdog", PB1176_WATCHDOG, NULL); -AMBA_DEVICE(gpio0, "dev:gpio0", PB1176_GPIO0, &gpio0_plat_data); -AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data); -AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data); -AMBA_DEVICE(rtc, "dev:rtc", PB1176_RTC, NULL); -AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL); -AMBA_DEVICE(uart0, "dev:uart0", PB1176_UART0, NULL); -AMBA_DEVICE(uart1, "dev:uart1", PB1176_UART1, NULL); -AMBA_DEVICE(uart2, "dev:uart2", PB1176_UART2, NULL); -AMBA_DEVICE(uart3, "dev:uart3", PB1176_UART3, NULL); -AMBA_DEVICE(ssp0, "dev:ssp0", PB1176_SSP, &ssp0_plat_data); -AMBA_DEVICE(clcd, "dev:clcd", PB1176_CLCD, &clcd_plat_data); +AHB_DEVICE(smc, "dev:smc", PB1176_SMC, NULL); +AHB_DEVICE(sctl, "dev:sctl", SCTL, NULL); +APB_DEVICE(wdog, "dev:wdog", PB1176_WATCHDOG, NULL); +APB_DEVICE(gpio0, "dev:gpio0", PB1176_GPIO0, &gpio0_plat_data); +APB_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data); +APB_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data); +APB_DEVICE(rtc, "dev:rtc", PB1176_RTC, NULL); +APB_DEVICE(sci0, "dev:sci0", SCI, NULL); +APB_DEVICE(uart0, "dev:uart0", PB1176_UART0, NULL); +APB_DEVICE(uart1, "dev:uart1", PB1176_UART1, NULL); +APB_DEVICE(uart2, "dev:uart2", PB1176_UART2, NULL); +APB_DEVICE(uart3, "dev:uart3", PB1176_UART3, NULL); +APB_DEVICE(ssp0, "dev:ssp0", PB1176_SSP, &ssp0_plat_data); +AHB_DEVICE(clcd, "dev:clcd", PB1176_CLCD, &clcd_plat_data); static struct amba_device *amba_devs[] __initdata = { &uart0_device, diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c index 2147335f66f..ae7fe54f6eb 100644 --- a/arch/arm/mach-realview/realview_pb11mp.c +++ b/arch/arm/mach-realview/realview_pb11mp.c @@ -127,52 +127,52 @@ static struct pl022_ssp_controller ssp0_plat_data = { * RealView PB11MPCore AMBA devices */ -#define GPIO2_IRQ { IRQ_PB11MP_GPIO2, NO_IRQ } -#define GPIO3_IRQ { IRQ_PB11MP_GPIO3, NO_IRQ } -#define AACI_IRQ { IRQ_TC11MP_AACI, NO_IRQ } +#define GPIO2_IRQ { IRQ_PB11MP_GPIO2 } +#define GPIO3_IRQ { IRQ_PB11MP_GPIO3 } +#define AACI_IRQ { IRQ_TC11MP_AACI } #define MMCI0_IRQ { IRQ_TC11MP_MMCI0A, IRQ_TC11MP_MMCI0B } -#define KMI0_IRQ { IRQ_TC11MP_KMI0, NO_IRQ } -#define KMI1_IRQ { IRQ_TC11MP_KMI1, NO_IRQ } -#define PB11MP_SMC_IRQ { NO_IRQ, NO_IRQ } -#define MPMC_IRQ { NO_IRQ, NO_IRQ } -#define PB11MP_CLCD_IRQ { IRQ_PB11MP_CLCD, NO_IRQ } -#define DMAC_IRQ { IRQ_PB11MP_DMAC, NO_IRQ } -#define SCTL_IRQ { NO_IRQ, NO_IRQ } -#define PB11MP_WATCHDOG_IRQ { IRQ_PB11MP_WATCHDOG, NO_IRQ } -#define PB11MP_GPIO0_IRQ { IRQ_PB11MP_GPIO0, NO_IRQ } -#define GPIO1_IRQ { IRQ_PB11MP_GPIO1, NO_IRQ } -#define PB11MP_RTC_IRQ { IRQ_TC11MP_RTC, NO_IRQ } -#define SCI_IRQ { IRQ_PB11MP_SCI, NO_IRQ } -#define PB11MP_UART0_IRQ { IRQ_TC11MP_UART0, NO_IRQ } -#define PB11MP_UART1_IRQ { IRQ_TC11MP_UART1, NO_IRQ } -#define PB11MP_UART2_IRQ { IRQ_PB11MP_UART2, NO_IRQ } -#define PB11MP_UART3_IRQ { IRQ_PB11MP_UART3, NO_IRQ } -#define PB11MP_SSP_IRQ { IRQ_PB11MP_SSP, NO_IRQ } +#define KMI0_IRQ { IRQ_TC11MP_KMI0 } +#define KMI1_IRQ { IRQ_TC11MP_KMI1 } +#define PB11MP_SMC_IRQ { } +#define MPMC_IRQ { } +#define PB11MP_CLCD_IRQ { IRQ_PB11MP_CLCD } +#define DMAC_IRQ { IRQ_PB11MP_DMAC } +#define SCTL_IRQ { } +#define PB11MP_WATCHDOG_IRQ { IRQ_PB11MP_WATCHDOG } +#define PB11MP_GPIO0_IRQ { IRQ_PB11MP_GPIO0 } +#define GPIO1_IRQ { IRQ_PB11MP_GPIO1 } +#define PB11MP_RTC_IRQ { IRQ_TC11MP_RTC } +#define SCI_IRQ { IRQ_PB11MP_SCI } +#define PB11MP_UART0_IRQ { IRQ_TC11MP_UART0 } +#define PB11MP_UART1_IRQ { IRQ_TC11MP_UART1 } +#define PB11MP_UART2_IRQ { IRQ_PB11MP_UART2 } +#define PB11MP_UART3_IRQ { IRQ_PB11MP_UART3 } +#define PB11MP_SSP_IRQ { IRQ_PB11MP_SSP } /* FPGA Primecells */ -AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL); -AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data); -AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL); -AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL); -AMBA_DEVICE(uart3, "fpga:uart3", PB11MP_UART3, NULL); +APB_DEVICE(aaci, "fpga:aaci", AACI, NULL); +APB_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data); +APB_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL); +APB_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL); +APB_DEVICE(uart3, "fpga:uart3", PB11MP_UART3, NULL); /* DevChip Primecells */ -AMBA_DEVICE(smc, "dev:smc", PB11MP_SMC, NULL); -AMBA_DEVICE(sctl, "dev:sctl", SCTL, NULL); -AMBA_DEVICE(wdog, "dev:wdog", PB11MP_WATCHDOG, NULL); -AMBA_DEVICE(gpio0, "dev:gpio0", PB11MP_GPIO0, &gpio0_plat_data); -AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data); -AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data); -AMBA_DEVICE(rtc, "dev:rtc", PB11MP_RTC, NULL); -AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL); -AMBA_DEVICE(uart0, "dev:uart0", PB11MP_UART0, NULL); -AMBA_DEVICE(uart1, "dev:uart1", PB11MP_UART1, NULL); -AMBA_DEVICE(uart2, "dev:uart2", PB11MP_UART2, NULL); -AMBA_DEVICE(ssp0, "dev:ssp0", PB11MP_SSP, &ssp0_plat_data); +AHB_DEVICE(smc, "dev:smc", PB11MP_SMC, NULL); +AHB_DEVICE(sctl, "dev:sctl", SCTL, NULL); +APB_DEVICE(wdog, "dev:wdog", PB11MP_WATCHDOG, NULL); +APB_DEVICE(gpio0, "dev:gpio0", PB11MP_GPIO0, &gpio0_plat_data); +APB_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data); +APB_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data); +APB_DEVICE(rtc, "dev:rtc", PB11MP_RTC, NULL); +APB_DEVICE(sci0, "dev:sci0", SCI, NULL); +APB_DEVICE(uart0, "dev:uart0", PB11MP_UART0, NULL); +APB_DEVICE(uart1, "dev:uart1", PB11MP_UART1, NULL); +APB_DEVICE(uart2, "dev:uart2", PB11MP_UART2, NULL); +APB_DEVICE(ssp0, "dev:ssp0", PB11MP_SSP, &ssp0_plat_data); /* Primecells on the NEC ISSP chip */ -AMBA_DEVICE(clcd, "issp:clcd", PB11MP_CLCD, &clcd_plat_data); -AMBA_DEVICE(dmac, "issp:dmac", DMAC, NULL); +AHB_DEVICE(clcd, "issp:clcd", PB11MP_CLCD, &clcd_plat_data); +AHB_DEVICE(dmac, "issp:dmac", DMAC, NULL); static struct amba_device *amba_devs[] __initdata = { &dmac_device, diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c index 25b2e59296f..59650174e6e 100644 --- a/arch/arm/mach-realview/realview_pba8.c +++ b/arch/arm/mach-realview/realview_pba8.c @@ -122,52 +122,52 @@ static struct pl022_ssp_controller ssp0_plat_data = { * RealView PBA8Core AMBA devices */ -#define GPIO2_IRQ { IRQ_PBA8_GPIO2, NO_IRQ } -#define GPIO3_IRQ { IRQ_PBA8_GPIO3, NO_IRQ } -#define AACI_IRQ { IRQ_PBA8_AACI, NO_IRQ } +#define GPIO2_IRQ { IRQ_PBA8_GPIO2 } +#define GPIO3_IRQ { IRQ_PBA8_GPIO3 } +#define AACI_IRQ { IRQ_PBA8_AACI } #define MMCI0_IRQ { IRQ_PBA8_MMCI0A, IRQ_PBA8_MMCI0B } -#define KMI0_IRQ { IRQ_PBA8_KMI0, NO_IRQ } -#define KMI1_IRQ { IRQ_PBA8_KMI1, NO_IRQ } -#define PBA8_SMC_IRQ { NO_IRQ, NO_IRQ } -#define MPMC_IRQ { NO_IRQ, NO_IRQ } -#define PBA8_CLCD_IRQ { IRQ_PBA8_CLCD, NO_IRQ } -#define DMAC_IRQ { IRQ_PBA8_DMAC, NO_IRQ } -#define SCTL_IRQ { NO_IRQ, NO_IRQ } -#define PBA8_WATCHDOG_IRQ { IRQ_PBA8_WATCHDOG, NO_IRQ } -#define PBA8_GPIO0_IRQ { IRQ_PBA8_GPIO0, NO_IRQ } -#define GPIO1_IRQ { IRQ_PBA8_GPIO1, NO_IRQ } -#define PBA8_RTC_IRQ { IRQ_PBA8_RTC, NO_IRQ } -#define SCI_IRQ { IRQ_PBA8_SCI, NO_IRQ } -#define PBA8_UART0_IRQ { IRQ_PBA8_UART0, NO_IRQ } -#define PBA8_UART1_IRQ { IRQ_PBA8_UART1, NO_IRQ } -#define PBA8_UART2_IRQ { IRQ_PBA8_UART2, NO_IRQ } -#define PBA8_UART3_IRQ { IRQ_PBA8_UART3, NO_IRQ } -#define PBA8_SSP_IRQ { IRQ_PBA8_SSP, NO_IRQ } +#define KMI0_IRQ { IRQ_PBA8_KMI0 } +#define KMI1_IRQ { IRQ_PBA8_KMI1 } +#define PBA8_SMC_IRQ { } +#define MPMC_IRQ { } +#define PBA8_CLCD_IRQ { IRQ_PBA8_CLCD } +#define DMAC_IRQ { IRQ_PBA8_DMAC } +#define SCTL_IRQ { } +#define PBA8_WATCHDOG_IRQ { IRQ_PBA8_WATCHDOG } +#define PBA8_GPIO0_IRQ { IRQ_PBA8_GPIO0 } +#define GPIO1_IRQ { IRQ_PBA8_GPIO1 } +#define PBA8_RTC_IRQ { IRQ_PBA8_RTC } +#define SCI_IRQ { IRQ_PBA8_SCI } +#define PBA8_UART0_IRQ { IRQ_PBA8_UART0 } +#define PBA8_UART1_IRQ { IRQ_PBA8_UART1 } +#define PBA8_UART2_IRQ { IRQ_PBA8_UART2 } +#define PBA8_UART3_IRQ { IRQ_PBA8_UART3 } +#define PBA8_SSP_IRQ { IRQ_PBA8_SSP } /* FPGA Primecells */ -AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL); -AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data); -AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL); -AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL); -AMBA_DEVICE(uart3, "fpga:uart3", PBA8_UART3, NULL); +APB_DEVICE(aaci, "fpga:aaci", AACI, NULL); +APB_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data); +APB_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL); +APB_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL); +APB_DEVICE(uart3, "fpga:uart3", PBA8_UART3, NULL); /* DevChip Primecells */ -AMBA_DEVICE(smc, "dev:smc", PBA8_SMC, NULL); -AMBA_DEVICE(sctl, "dev:sctl", SCTL, NULL); -AMBA_DEVICE(wdog, "dev:wdog", PBA8_WATCHDOG, NULL); -AMBA_DEVICE(gpio0, "dev:gpio0", PBA8_GPIO0, &gpio0_plat_data); -AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data); -AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data); -AMBA_DEVICE(rtc, "dev:rtc", PBA8_RTC, NULL); -AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL); -AMBA_DEVICE(uart0, "dev:uart0", PBA8_UART0, NULL); -AMBA_DEVICE(uart1, "dev:uart1", PBA8_UART1, NULL); -AMBA_DEVICE(uart2, "dev:uart2", PBA8_UART2, NULL); -AMBA_DEVICE(ssp0, "dev:ssp0", PBA8_SSP, &ssp0_plat_data); +AHB_DEVICE(smc, "dev:smc", PBA8_SMC, NULL); +AHB_DEVICE(sctl, "dev:sctl", SCTL, NULL); +APB_DEVICE(wdog, "dev:wdog", PBA8_WATCHDOG, NULL); +APB_DEVICE(gpio0, "dev:gpio0", PBA8_GPIO0, &gpio0_plat_data); +APB_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data); +APB_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data); +APB_DEVICE(rtc, "dev:rtc", PBA8_RTC, NULL); +APB_DEVICE(sci0, "dev:sci0", SCI, NULL); +APB_DEVICE(uart0, "dev:uart0", PBA8_UART0, NULL); +APB_DEVICE(uart1, "dev:uart1", PBA8_UART1, NULL); +APB_DEVICE(uart2, "dev:uart2", PBA8_UART2, NULL); +APB_DEVICE(ssp0, "dev:ssp0", PBA8_SSP, &ssp0_plat_data); /* Primecells on the NEC ISSP chip */ -AMBA_DEVICE(clcd, "issp:clcd", PBA8_CLCD, &clcd_plat_data); -AMBA_DEVICE(dmac, "issp:dmac", DMAC, NULL); +AHB_DEVICE(clcd, "issp:clcd", PBA8_CLCD, &clcd_plat_data); +AHB_DEVICE(dmac, "issp:dmac", DMAC, NULL); static struct amba_device *amba_devs[] __initdata = { &dmac_device, diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c index ac715645b86..1cd9956f587 100644 --- a/arch/arm/mach-realview/realview_pbx.c +++ b/arch/arm/mach-realview/realview_pbx.c @@ -144,52 +144,52 @@ static struct pl022_ssp_controller ssp0_plat_data = { * RealView PBXCore AMBA devices */ -#define GPIO2_IRQ { IRQ_PBX_GPIO2, NO_IRQ } -#define GPIO3_IRQ { IRQ_PBX_GPIO3, NO_IRQ } -#define AACI_IRQ { IRQ_PBX_AACI, NO_IRQ } +#define GPIO2_IRQ { IRQ_PBX_GPIO2 } +#define GPIO3_IRQ { IRQ_PBX_GPIO3 } +#define AACI_IRQ { IRQ_PBX_AACI } #define MMCI0_IRQ { IRQ_PBX_MMCI0A, IRQ_PBX_MMCI0B } -#define KMI0_IRQ { IRQ_PBX_KMI0, NO_IRQ } -#define KMI1_IRQ { IRQ_PBX_KMI1, NO_IRQ } -#define PBX_SMC_IRQ { NO_IRQ, NO_IRQ } -#define MPMC_IRQ { NO_IRQ, NO_IRQ } -#define PBX_CLCD_IRQ { IRQ_PBX_CLCD, NO_IRQ } -#define DMAC_IRQ { IRQ_PBX_DMAC, NO_IRQ } -#define SCTL_IRQ { NO_IRQ, NO_IRQ } -#define PBX_WATCHDOG_IRQ { IRQ_PBX_WATCHDOG, NO_IRQ } -#define PBX_GPIO0_IRQ { IRQ_PBX_GPIO0, NO_IRQ } -#define GPIO1_IRQ { IRQ_PBX_GPIO1, NO_IRQ } -#define PBX_RTC_IRQ { IRQ_PBX_RTC, NO_IRQ } -#define SCI_IRQ { IRQ_PBX_SCI, NO_IRQ } -#define PBX_UART0_IRQ { IRQ_PBX_UART0, NO_IRQ } -#define PBX_UART1_IRQ { IRQ_PBX_UART1, NO_IRQ } -#define PBX_UART2_IRQ { IRQ_PBX_UART2, NO_IRQ } -#define PBX_UART3_IRQ { IRQ_PBX_UART3, NO_IRQ } -#define PBX_SSP_IRQ { IRQ_PBX_SSP, NO_IRQ } +#define KMI0_IRQ { IRQ_PBX_KMI0 } +#define KMI1_IRQ { IRQ_PBX_KMI1 } +#define PBX_SMC_IRQ { } +#define MPMC_IRQ { } +#define PBX_CLCD_IRQ { IRQ_PBX_CLCD } +#define DMAC_IRQ { IRQ_PBX_DMAC } +#define SCTL_IRQ { } +#define PBX_WATCHDOG_IRQ { IRQ_PBX_WATCHDOG } +#define PBX_GPIO0_IRQ { IRQ_PBX_GPIO0 } +#define GPIO1_IRQ { IRQ_PBX_GPIO1 } +#define PBX_RTC_IRQ { IRQ_PBX_RTC } +#define SCI_IRQ { IRQ_PBX_SCI } +#define PBX_UART0_IRQ { IRQ_PBX_UART0 } +#define PBX_UART1_IRQ { IRQ_PBX_UART1 } +#define PBX_UART2_IRQ { IRQ_PBX_UART2 } +#define PBX_UART3_IRQ { IRQ_PBX_UART3 } +#define PBX_SSP_IRQ { IRQ_PBX_SSP } /* FPGA Primecells */ -AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL); -AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data); -AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL); -AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL); -AMBA_DEVICE(uart3, "fpga:uart3", PBX_UART3, NULL); +APB_DEVICE(aaci, "fpga:aaci", AACI, NULL); +APB_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data); +APB_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL); +APB_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL); +APB_DEVICE(uart3, "fpga:uart3", PBX_UART3, NULL); /* DevChip Primecells */ -AMBA_DEVICE(smc, "dev:smc", PBX_SMC, NULL); -AMBA_DEVICE(sctl, "dev:sctl", SCTL, NULL); -AMBA_DEVICE(wdog, "dev:wdog", PBX_WATCHDOG, NULL); -AMBA_DEVICE(gpio0, "dev:gpio0", PBX_GPIO0, &gpio0_plat_data); -AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data); -AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data); -AMBA_DEVICE(rtc, "dev:rtc", PBX_RTC, NULL); -AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL); -AMBA_DEVICE(uart0, "dev:uart0", PBX_UART0, NULL); -AMBA_DEVICE(uart1, "dev:uart1", PBX_UART1, NULL); -AMBA_DEVICE(uart2, "dev:uart2", PBX_UART2, NULL); -AMBA_DEVICE(ssp0, "dev:ssp0", PBX_SSP, &ssp0_plat_data); +AHB_DEVICE(smc, "dev:smc", PBX_SMC, NULL); +AHB_DEVICE(sctl, "dev:sctl", SCTL, NULL); +APB_DEVICE(wdog, "dev:wdog", PBX_WATCHDOG, NULL); +APB_DEVICE(gpio0, "dev:gpio0", PBX_GPIO0, &gpio0_plat_data); +APB_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data); +APB_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data); +APB_DEVICE(rtc, "dev:rtc", PBX_RTC, NULL); +APB_DEVICE(sci0, "dev:sci0", SCI, NULL); +APB_DEVICE(uart0, "dev:uart0", PBX_UART0, NULL); +APB_DEVICE(uart1, "dev:uart1", PBX_UART1, NULL); +APB_DEVICE(uart2, "dev:uart2", PBX_UART2, NULL); +APB_DEVICE(ssp0, "dev:ssp0", PBX_SSP, &ssp0_plat_data); /* Primecells on the NEC ISSP chip */ -AMBA_DEVICE(clcd, "issp:clcd", PBX_CLCD, &clcd_plat_data); -AMBA_DEVICE(dmac, "issp:dmac", DMAC, NULL); +AHB_DEVICE(clcd, "issp:clcd", PBX_CLCD, &clcd_plat_data); +AHB_DEVICE(dmac, "issp:dmac", DMAC, NULL); static struct amba_device *amba_devs[] __initdata = { &dmac_device, diff --git a/arch/arm/mach-rpc/include/mach/system.h b/arch/arm/mach-rpc/include/mach/system.h deleted file mode 100644 index 359bab94b6a..00000000000 --- a/arch/arm/mach-rpc/include/mach/system.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * arch/arm/mach-rpc/include/mach/system.h - * - * Copyright (C) 1996-1999 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -static inline void arch_idle(void) -{ - cpu_do_idle(); -} diff --git a/arch/arm/mach-s3c2410/cpu-freq.c b/arch/arm/mach-s3c2410/cpu-freq.c index 7dc6c46b5e2..5404535da1a 100644 --- a/arch/arm/mach-s3c2410/cpu-freq.c +++ b/arch/arm/mach-s3c2410/cpu-freq.c @@ -115,7 +115,8 @@ static struct s3c_cpufreq_info s3c2410_cpufreq_info = { .debug_io_show = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs), }; -static int s3c2410_cpufreq_add(struct device *dev) +static int s3c2410_cpufreq_add(struct device *dev, + struct subsys_interface *sif) { return s3c_cpufreq_register(&s3c2410_cpufreq_info); } @@ -133,7 +134,8 @@ static int __init s3c2410_cpufreq_init(void) arch_initcall(s3c2410_cpufreq_init); -static int s3c2410a_cpufreq_add(struct device *dev) +static int s3c2410a_cpufreq_add(struct device *dev, + struct subsys_interface *sif) { /* alter the maximum freq settings for S3C2410A. If a board knows * it only has a maximum of 200, then it should register its own @@ -144,7 +146,7 @@ static int s3c2410a_cpufreq_add(struct device *dev) s3c2410_cpufreq_info.max.pclk = 66500000; s3c2410_cpufreq_info.name = "s3c2410a"; - return s3c2410_cpufreq_add(dev); + return s3c2410_cpufreq_add(dev, sif); } static struct subsys_interface s3c2410a_cpufreq_interface = { diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c index 2afd00014a7..4803338cf56 100644 --- a/arch/arm/mach-s3c2410/dma.c +++ b/arch/arm/mach-s3c2410/dma.c @@ -132,7 +132,8 @@ static struct s3c24xx_dma_order __initdata s3c2410_dma_order = { }, }; -static int __init s3c2410_dma_add(struct device *dev) +static int __init s3c2410_dma_add(struct device *dev, + struct subsys_interface *sif) { s3c2410_dma_init(); s3c24xx_dma_order_set(&s3c2410_dma_order); @@ -148,7 +149,7 @@ static struct subsys_interface s3c2410_dma_interface = { static int __init s3c2410_dma_drvinit(void) { - return subsys_interface_register(&s3c2410_interface); + return subsys_interface_register(&s3c2410_dma_interface); } arch_initcall(s3c2410_dma_drvinit); diff --git a/arch/arm/mach-s3c2410/include/mach/system.h b/arch/arm/mach-s3c2410/include/mach/system.h deleted file mode 100644 index 5e215c1a5c8..00000000000 --- a/arch/arm/mach-s3c2410/include/mach/system.h +++ /dev/null @@ -1,54 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/system.h - * - * Copyright (c) 2003 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2410 - System function defines and includes - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/io.h> -#include <mach/hardware.h> - -#include <mach/map.h> -#include <mach/idle.h> - -#include <mach/regs-clock.h> - -void (*s3c24xx_idle)(void); - -void s3c24xx_default_idle(void) -{ - unsigned long tmp; - int i; - - /* idle the system by using the idle mode which will wait for an - * interrupt to happen before restarting the system. - */ - - /* Warning: going into idle state upsets jtag scanning */ - - __raw_writel(__raw_readl(S3C2410_CLKCON) | S3C2410_CLKCON_IDLE, - S3C2410_CLKCON); - - /* the samsung port seems to do a loop and then unset idle.. */ - for (i = 0; i < 50; i++) { - tmp += __raw_readl(S3C2410_CLKCON); /* ensure loop not optimised out */ - } - - /* this bit is not cleared on re-start... */ - - __raw_writel(__raw_readl(S3C2410_CLKCON) & ~S3C2410_CLKCON_IDLE, - S3C2410_CLKCON); -} - -static void arch_idle(void) -{ - if (s3c24xx_idle != NULL) - (s3c24xx_idle)(); - else - s3c24xx_default_idle(); -} diff --git a/arch/arm/mach-s3c2410/pll.c b/arch/arm/mach-s3c2410/pll.c index c07438bfc99..e0b3b347da8 100644 --- a/arch/arm/mach-s3c2410/pll.c +++ b/arch/arm/mach-s3c2410/pll.c @@ -66,7 +66,7 @@ static struct cpufreq_frequency_table pll_vals_12MHz[] = { { .frequency = 270000000, .index = PLLVAL(127, 1, 1), }, }; -static int s3c2410_plls_add(struct device *dev) +static int s3c2410_plls_add(struct device *dev, struct subsys_interface *sif) { return s3c_plltab_register(pll_vals_12MHz, ARRAY_SIZE(pll_vals_12MHz)); } diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c index fda5385deff..03f706dd600 100644 --- a/arch/arm/mach-s3c2410/pm.c +++ b/arch/arm/mach-s3c2410/pm.c @@ -111,7 +111,7 @@ struct syscore_ops s3c2410_pm_syscore_ops = { .resume = s3c2410_pm_resume, }; -static int s3c2410_pm_add(struct device *dev) +static int s3c2410_pm_add(struct device *dev, struct subsys_interface *sif) { pm_cpu_prep = s3c2410_pm_prepare; pm_cpu_sleep = s3c2410_cpu_suspend; diff --git a/arch/arm/mach-s3c2412/cpu-freq.c b/arch/arm/mach-s3c2412/cpu-freq.c index d8664b7652c..125be7d5fa6 100644 --- a/arch/arm/mach-s3c2412/cpu-freq.c +++ b/arch/arm/mach-s3c2412/cpu-freq.c @@ -194,7 +194,8 @@ static struct s3c_cpufreq_info s3c2412_cpufreq_info = { .debug_io_show = s3c_cpufreq_debugfs_call(s3c2412_iotiming_debugfs), }; -static int s3c2412_cpufreq_add(struct device *dev) +static int s3c2412_cpufreq_add(struct device *dev, + struct subsys_interface *sif) { unsigned long fclk_rate; diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c index 142acd3b5e1..38472ac920f 100644 --- a/arch/arm/mach-s3c2412/dma.c +++ b/arch/arm/mach-s3c2412/dma.c @@ -159,7 +159,8 @@ static struct s3c24xx_dma_selection __initdata s3c2412_dma_sel = { .map_size = ARRAY_SIZE(s3c2412_dma_mappings), }; -static int __init s3c2412_dma_add(struct device *dev) +static int __init s3c2412_dma_add(struct device *dev, + struct subsys_interface *sif) { s3c2410_dma_init(); return s3c24xx_dma_init_map(&s3c2412_dma_sel); diff --git a/arch/arm/mach-s3c2412/irq.c b/arch/arm/mach-s3c2412/irq.c index a8a46c1644f..e65619ddbcc 100644 --- a/arch/arm/mach-s3c2412/irq.c +++ b/arch/arm/mach-s3c2412/irq.c @@ -170,7 +170,7 @@ static int s3c2412_irq_rtc_wake(struct irq_data *data, unsigned int state) static struct irq_chip s3c2412_irq_rtc_chip; -static int s3c2412_irq_add(struct device *dev) +static int s3c2412_irq_add(struct device *dev, struct subsys_interface *sif) { unsigned int irqno; diff --git a/arch/arm/mach-s3c2412/pm.c b/arch/arm/mach-s3c2412/pm.c index d1adfa65f66..d04588506ec 100644 --- a/arch/arm/mach-s3c2412/pm.c +++ b/arch/arm/mach-s3c2412/pm.c @@ -56,7 +56,7 @@ static void s3c2412_pm_prepare(void) { } -static int s3c2412_pm_add(struct device *dev) +static int s3c2412_pm_add(struct device *dev, struct subsys_interface *sif) { pm_cpu_prep = s3c2412_pm_prepare; pm_cpu_sleep = s3c2412_cpu_suspend; diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c index aff6e85a97c..c6eac987109 100644 --- a/arch/arm/mach-s3c2412/s3c2412.c +++ b/arch/arm/mach-s3c2412/s3c2412.c @@ -32,8 +32,6 @@ #include <asm/proc-fns.h> #include <asm/irq.h> -#include <mach/idle.h> - #include <plat/cpu-freq.h> #include <mach/regs-clock.h> @@ -164,7 +162,7 @@ void __init s3c2412_map_io(void) /* set our idle function */ - s3c24xx_idle = s3c2412_idle; + arm_pm_idle = s3c2412_idle; /* register our io-tables */ diff --git a/arch/arm/mach-s3c2416/irq.c b/arch/arm/mach-s3c2416/irq.c index 36df761061d..fd49f35e448 100644 --- a/arch/arm/mach-s3c2416/irq.c +++ b/arch/arm/mach-s3c2416/irq.c @@ -213,7 +213,8 @@ static int __init s3c2416_add_sub(unsigned int base, return 0; } -static int __init s3c2416_irq_add(struct device *dev) +static int __init s3c2416_irq_add(struct device *dev, + struct subsys_interface *sif) { printk(KERN_INFO "S3C2416: IRQ Support\n"); diff --git a/arch/arm/mach-s3c2416/pm.c b/arch/arm/mach-s3c2416/pm.c index 3bdb15a0d41..1bd4817b8eb 100644 --- a/arch/arm/mach-s3c2416/pm.c +++ b/arch/arm/mach-s3c2416/pm.c @@ -48,7 +48,7 @@ static void s3c2416_pm_prepare(void) __raw_writel(virt_to_phys(s3c_cpu_resume), S3C2412_INFORM1); } -static int s3c2416_pm_add(struct device *dev) +static int s3c2416_pm_add(struct device *dev, struct subsys_interface *sif) { pm_cpu_prep = s3c2416_pm_prepare; pm_cpu_sleep = s3c2416_cpu_suspend; diff --git a/arch/arm/mach-s3c2416/s3c2416.c b/arch/arm/mach-s3c2416/s3c2416.c index 5287d2808d3..0e9a71c90ed 100644 --- a/arch/arm/mach-s3c2416/s3c2416.c +++ b/arch/arm/mach-s3c2416/s3c2416.c @@ -44,7 +44,6 @@ #include <asm/proc-fns.h> #include <asm/irq.h> -#include <mach/idle.h> #include <mach/regs-s3c2443-clock.h> #include <plat/gpio-core.h> @@ -60,6 +59,7 @@ #include <plat/fb-core.h> #include <plat/nand-core.h> #include <plat/adc-core.h> +#include <plat/rtc-core.h> static struct map_desc s3c2416_iodesc[] __initdata = { IODESC_ENT(WATCHDOG), @@ -88,8 +88,6 @@ int __init s3c2416_init(void) { printk(KERN_INFO "S3C2416: Initializing architecture\n"); - /* s3c24xx_idle = s3c2416_idle; */ - /* change WDT IRQ number */ s3c_device_wdt.resource[1].start = IRQ_S3C2443_WDT; s3c_device_wdt.resource[1].end = IRQ_S3C2443_WDT; @@ -101,6 +99,7 @@ int __init s3c2416_init(void) s3c_fb_setname("s3c2443-fb"); s3c_adc_setname("s3c2416-adc"); + s3c_rtc_setname("s3c2416-rtc"); #ifdef CONFIG_PM register_syscore_ops(&s3c2416_pm_syscore_ops); diff --git a/arch/arm/mach-s3c2440/clock.c b/arch/arm/mach-s3c2440/clock.c index bedbc87a342..414364eb426 100644 --- a/arch/arm/mach-s3c2440/clock.c +++ b/arch/arm/mach-s3c2440/clock.c @@ -149,7 +149,7 @@ static struct clk_lookup s3c2440_clk_lookup[] = { CLKDEV_INIT(NULL, "clk_uart_baud3", &s3c2440_clk_fclk_n), }; -static int s3c2440_clk_add(struct device *dev) +static int s3c2440_clk_add(struct device *dev, struct subsys_interface *sif) { struct clk *clock_upll; struct clk *clock_h; diff --git a/arch/arm/mach-s3c2440/dma.c b/arch/arm/mach-s3c2440/dma.c index 15b1ddf8f62..5f0a0c8ef84 100644 --- a/arch/arm/mach-s3c2440/dma.c +++ b/arch/arm/mach-s3c2440/dma.c @@ -174,7 +174,8 @@ static struct s3c24xx_dma_order __initdata s3c2440_dma_order = { }, }; -static int __init s3c2440_dma_add(struct device *dev) +static int __init s3c2440_dma_add(struct device *dev, + struct subsys_interface *sif) { s3c2410_dma_init(); s3c24xx_dma_order_set(&s3c2440_dma_order); diff --git a/arch/arm/mach-s3c2440/irq.c b/arch/arm/mach-s3c2440/irq.c index 4fee9bc6bcb..4a18cde439c 100644 --- a/arch/arm/mach-s3c2440/irq.c +++ b/arch/arm/mach-s3c2440/irq.c @@ -92,7 +92,7 @@ static struct irq_chip s3c_irq_wdtac97 = { .irq_ack = s3c_irq_wdtac97_ack, }; -static int s3c2440_irq_add(struct device *dev) +static int s3c2440_irq_add(struct device *dev, struct subsys_interface *sif) { unsigned int irqno; diff --git a/arch/arm/mach-s3c2440/s3c2440-cpufreq.c b/arch/arm/mach-s3c2440/s3c2440-cpufreq.c index cf7596694ef..61776764d9f 100644 --- a/arch/arm/mach-s3c2440/s3c2440-cpufreq.c +++ b/arch/arm/mach-s3c2440/s3c2440-cpufreq.c @@ -270,7 +270,8 @@ struct s3c_cpufreq_info s3c2440_cpufreq_info = { .debug_io_show = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs), }; -static int s3c2440_cpufreq_add(struct device *dev) +static int s3c2440_cpufreq_add(struct device *dev, + struct subsys_interface *sif) { xtal = s3c_cpufreq_clk_get(NULL, "xtal"); hclk = s3c_cpufreq_clk_get(NULL, "hclk"); diff --git a/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c b/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c index b5368ae8d7f..551fb433be8 100644 --- a/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c +++ b/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c @@ -51,7 +51,7 @@ static struct cpufreq_frequency_table s3c2440_plls_12[] __initdata = { { .frequency = 400000000, .index = PLLVAL(0x5c, 1, 1), }, /* FVco 800.000000 */ }; -static int s3c2440_plls12_add(struct device *dev) +static int s3c2440_plls12_add(struct device *dev, struct subsys_interface *sif) { struct clk *xtal_clk; unsigned long xtal; diff --git a/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c b/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c index 42f2b5cd239..3f15bcf6429 100644 --- a/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c +++ b/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c @@ -79,7 +79,8 @@ static struct cpufreq_frequency_table s3c2440_plls_169344[] __initdata = { { .frequency = 402192000, .index = PLLVAL(87, 2, 1), }, /* FVco 804.384000 */ }; -static int s3c2440_plls169344_add(struct device *dev) +static int s3c2440_plls169344_add(struct device *dev, + struct subsys_interface *sif) { struct clk *xtal_clk; unsigned long xtal; diff --git a/arch/arm/mach-s3c2440/s3c2442.c b/arch/arm/mach-s3c2440/s3c2442.c index 8004e0497bf..22cb7c94a8c 100644 --- a/arch/arm/mach-s3c2440/s3c2442.c +++ b/arch/arm/mach-s3c2440/s3c2442.c @@ -122,7 +122,7 @@ static struct clk s3c2442_clk_cam_upll = { }, }; -static int s3c2442_clk_add(struct device *dev) +static int s3c2442_clk_add(struct device *dev, struct subsys_interface *sif) { struct clk *clock_upll; struct clk *clock_h; diff --git a/arch/arm/mach-s3c2440/s3c244x-clock.c b/arch/arm/mach-s3c2440/s3c244x-clock.c index b3fdbdda3d5..6d9b688c442 100644 --- a/arch/arm/mach-s3c2440/s3c244x-clock.c +++ b/arch/arm/mach-s3c2440/s3c244x-clock.c @@ -72,7 +72,7 @@ static struct clk clk_arm = { }, }; -static int s3c244x_clk_add(struct device *dev) +static int s3c244x_clk_add(struct device *dev, struct subsys_interface *sif) { unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN); unsigned long clkdivn; diff --git a/arch/arm/mach-s3c2440/s3c244x-irq.c b/arch/arm/mach-s3c2440/s3c244x-irq.c index 74d3dcf46a4..5fe8e58d3af 100644 --- a/arch/arm/mach-s3c2440/s3c244x-irq.c +++ b/arch/arm/mach-s3c2440/s3c244x-irq.c @@ -91,7 +91,7 @@ static struct irq_chip s3c_irq_cam = { .irq_ack = s3c_irq_cam_ack, }; -static int s3c244x_irq_add(struct device *dev) +static int s3c244x_irq_add(struct device *dev, struct subsys_interface *sif) { unsigned int irqno; diff --git a/arch/arm/mach-s3c2443/dma.c b/arch/arm/mach-s3c2443/dma.c index de6b4a23c9e..14224517e62 100644 --- a/arch/arm/mach-s3c2443/dma.c +++ b/arch/arm/mach-s3c2443/dma.c @@ -135,7 +135,8 @@ static struct s3c24xx_dma_selection __initdata s3c2443_dma_sel = { .map_size = ARRAY_SIZE(s3c2443_dma_mappings), }; -static int __init s3c2443_dma_add(struct device *dev) +static int __init s3c2443_dma_add(struct device *dev, + struct subsys_interface *sif) { s3c24xx_dma_init(6, IRQ_S3C2443_DMA0, 0x100); return s3c24xx_dma_init_map(&s3c2443_dma_sel); diff --git a/arch/arm/mach-s3c2443/irq.c b/arch/arm/mach-s3c2443/irq.c index 35e4ff24fb4..ac2829f56d1 100644 --- a/arch/arm/mach-s3c2443/irq.c +++ b/arch/arm/mach-s3c2443/irq.c @@ -241,7 +241,8 @@ static int __init s3c2443_add_sub(unsigned int base, return 0; } -static int __init s3c2443_irq_add(struct device *dev) +static int __init s3c2443_irq_add(struct device *dev, + struct subsys_interface *sif) { printk("S3C2443: IRQ Support\n"); diff --git a/arch/arm/mach-s3c2443/s3c2443.c b/arch/arm/mach-s3c2443/s3c2443.c index b9deaeb0dff..b7778a9dafa 100644 --- a/arch/arm/mach-s3c2443/s3c2443.c +++ b/arch/arm/mach-s3c2443/s3c2443.c @@ -41,6 +41,7 @@ #include <plat/fb-core.h> #include <plat/nand-core.h> #include <plat/adc-core.h> +#include <plat/rtc-core.h> static struct map_desc s3c2443_iodesc[] __initdata = { IODESC_ENT(WATCHDOG), @@ -73,6 +74,7 @@ int __init s3c2443_init(void) s3c_fb_setname("s3c2443-fb"); s3c_adc_setname("s3c2443-adc"); + s3c_rtc_setname("s3c2443-rtc"); /* change WDT IRQ number */ s3c_device_wdt.resource[1].start = IRQ_S3C2443_WDT; diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c index 31bb27dc4ae..aebbcc291b4 100644 --- a/arch/arm/mach-s3c64xx/clock.c +++ b/arch/arm/mach-s3c64xx/clock.c @@ -138,6 +138,11 @@ static struct clk init_clocks_off[] = { .ctrlbit = S3C_CLKCON_PCLK_TSADC, }, { .name = "i2c", +#ifdef CONFIG_S3C_DEV_I2C1 + .devname = "s3c2440-i2c.0", +#else + .devname = "s3c2440-i2c", +#endif .parent = &clk_p, .enable = s3c64xx_pclk_ctrl, .ctrlbit = S3C_CLKCON_PCLK_IIC, diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c64xx/common.c index 4a7394d4bd9..bee7dcd4df7 100644 --- a/arch/arm/mach-s3c64xx/common.c +++ b/arch/arm/mach-s3c64xx/common.c @@ -49,7 +49,7 @@ /* uart registration process */ -void __init s3c64xx_init_uarts(struct s3c2410_uartcfg *cfg, int no) +static void __init s3c64xx_init_uarts(struct s3c2410_uartcfg *cfg, int no) { s3c24xx_init_uartdevs("s3c6400-uart", s3c64xx_uart_resources, cfg, no); } diff --git a/arch/arm/mach-s3c64xx/include/mach/system.h b/arch/arm/mach-s3c64xx/include/mach/system.h deleted file mode 100644 index 353ed4389ae..00000000000 --- a/arch/arm/mach-s3c64xx/include/mach/system.h +++ /dev/null @@ -1,19 +0,0 @@ -/* linux/arch/arm/mach-s3c6400/include/mach/system.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C6400 - system implementation - */ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H __FILE__ - -static void arch_idle(void) -{ - /* nothing here yet */ -} - -#endif /* __ASM_ARCH_IRQ_H */ diff --git a/arch/arm/mach-s5p64x0/common.c b/arch/arm/mach-s5p64x0/common.c index 52b89a37644..9143f8b1996 100644 --- a/arch/arm/mach-s5p64x0/common.c +++ b/arch/arm/mach-s5p64x0/common.c @@ -146,15 +146,12 @@ static void s5p64x0_idle(void) { unsigned long val; - if (!need_resched()) { - val = __raw_readl(S5P64X0_PWR_CFG); - val &= ~(0x3 << 5); - val |= (0x1 << 5); - __raw_writel(val, S5P64X0_PWR_CFG); + val = __raw_readl(S5P64X0_PWR_CFG); + val &= ~(0x3 << 5); + val |= (0x1 << 5); + __raw_writel(val, S5P64X0_PWR_CFG); - cpu_do_idle(); - } - local_irq_enable(); + cpu_do_idle(); } /* @@ -286,7 +283,7 @@ int __init s5p64x0_init(void) printk(KERN_INFO "S5P64X0(S5P6440/S5P6450): Initializing architecture\n"); /* set idle function */ - pm_idle = s5p64x0_idle; + arm_pm_idle = s5p64x0_idle; return device_register(&s5p64x0_dev); } diff --git a/arch/arm/mach-s5p64x0/dma.c b/arch/arm/mach-s5p64x0/dma.c index f820c074440..f7f68ad7791 100644 --- a/arch/arm/mach-s5p64x0/dma.c +++ b/arch/arm/mach-s5p64x0/dma.c @@ -108,34 +108,22 @@ struct dma_pl330_platdata s5p6450_pdma_pdata = { .peri_id = s5p6450_pdma_peri, }; -struct amba_device s5p64x0_device_pdma = { - .dev = { - .init_name = "dma-pl330", - .dma_mask = &dma_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .res = { - .start = S5P64X0_PA_PDMA, - .end = S5P64X0_PA_PDMA + SZ_4K, - .flags = IORESOURCE_MEM, - }, - .irq = {IRQ_DMA0, NO_IRQ}, - .periphid = 0x00041330, -}; +AMBA_AHB_DEVICE(s5p64x0_pdma, "dma-pl330", 0x00041330, S5P64X0_PA_PDMA, + {IRQ_DMA0}, NULL); static int __init s5p64x0_dma_init(void) { if (soc_is_s5p6450()) { dma_cap_set(DMA_SLAVE, s5p6450_pdma_pdata.cap_mask); dma_cap_set(DMA_CYCLIC, s5p6450_pdma_pdata.cap_mask); - s5p64x0_device_pdma.dev.platform_data = &s5p6450_pdma_pdata; + s5p64x0_pdma_device.dev.platform_data = &s5p6450_pdma_pdata; } else { dma_cap_set(DMA_SLAVE, s5p6440_pdma_pdata.cap_mask); dma_cap_set(DMA_CYCLIC, s5p6440_pdma_pdata.cap_mask); - s5p64x0_device_pdma.dev.platform_data = &s5p6440_pdma_pdata; + s5p64x0_pdma_device.dev.platform_data = &s5p6440_pdma_pdata; } - amba_device_register(&s5p64x0_device_pdma, &iomem_resource); + amba_device_register(&s5p64x0_pdma_device, &iomem_resource); return 0; } diff --git a/arch/arm/mach-s5p64x0/include/mach/system.h b/arch/arm/mach-s5p64x0/include/mach/system.h deleted file mode 100644 index cf26e0954a2..00000000000 --- a/arch/arm/mach-s5p64x0/include/mach/system.h +++ /dev/null @@ -1,21 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/include/mach/system.h - * - * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5P64X0 - system support header - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H __FILE__ - -static void arch_idle(void) -{ - /* nothing here yet */ -} - -#endif /* __ASM_ARCH_SYSTEM_H */ diff --git a/arch/arm/mach-s5p64x0/pm.c b/arch/arm/mach-s5p64x0/pm.c index 23f9b22439c..9cba18bfe47 100644 --- a/arch/arm/mach-s5p64x0/pm.c +++ b/arch/arm/mach-s5p64x0/pm.c @@ -160,7 +160,7 @@ static void s5p64x0_pm_prepare(void) } -static int s5p64x0_pm_add(struct device *dev) +static int s5p64x0_pm_add(struct device *dev, struct subsys_interface *sif) { pm_cpu_prep = s5p64x0_pm_prepare; pm_cpu_sleep = s5p64x0_cpu_suspend; diff --git a/arch/arm/mach-s5pc100/common.c b/arch/arm/mach-s5pc100/common.c index c9095730a7f..ff71e2d467c 100644 --- a/arch/arm/mach-s5pc100/common.c +++ b/arch/arm/mach-s5pc100/common.c @@ -129,14 +129,6 @@ static struct map_desc s5pc100_iodesc[] __initdata = { } }; -static void s5pc100_idle(void) -{ - if (!need_resched()) - cpu_do_idle(); - - local_irq_enable(); -} - /* * s5pc100_map_io * @@ -210,10 +202,6 @@ core_initcall(s5pc100_core_init); int __init s5pc100_init(void) { printk(KERN_INFO "S5PC100: Initializing architecture\n"); - - /* set idle function */ - pm_idle = s5pc100_idle; - return device_register(&s5pc100_dev); } diff --git a/arch/arm/mach-s5pc100/dma.c b/arch/arm/mach-s5pc100/dma.c index c841f4d313f..96b1ab3dcd4 100644 --- a/arch/arm/mach-s5pc100/dma.c +++ b/arch/arm/mach-s5pc100/dma.c @@ -73,21 +73,8 @@ struct dma_pl330_platdata s5pc100_pdma0_pdata = { .peri_id = pdma0_peri, }; -struct amba_device s5pc100_device_pdma0 = { - .dev = { - .init_name = "dma-pl330.0", - .dma_mask = &dma_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &s5pc100_pdma0_pdata, - }, - .res = { - .start = S5PC100_PA_PDMA0, - .end = S5PC100_PA_PDMA0 + SZ_4K, - .flags = IORESOURCE_MEM, - }, - .irq = {IRQ_PDMA0, NO_IRQ}, - .periphid = 0x00041330, -}; +AMBA_AHB_DEVICE(s5pc100_pdma0, "dma-pl330.0", 0x00041330, S5PC100_PA_PDMA0, + {IRQ_PDMA0}, &s5pc100_pdma0_pdata); u8 pdma1_peri[] = { DMACH_UART0_RX, @@ -127,31 +114,18 @@ struct dma_pl330_platdata s5pc100_pdma1_pdata = { .peri_id = pdma1_peri, }; -struct amba_device s5pc100_device_pdma1 = { - .dev = { - .init_name = "dma-pl330.1", - .dma_mask = &dma_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &s5pc100_pdma1_pdata, - }, - .res = { - .start = S5PC100_PA_PDMA1, - .end = S5PC100_PA_PDMA1 + SZ_4K, - .flags = IORESOURCE_MEM, - }, - .irq = {IRQ_PDMA1, NO_IRQ}, - .periphid = 0x00041330, -}; +AMBA_AHB_DEVICE(s5pc100_pdma1, "dma-pl330.1", 0x00041330, S5PC100_PA_PDMA1, + {IRQ_PDMA1}, &s5pc100_pdma1_pdata); static int __init s5pc100_dma_init(void) { dma_cap_set(DMA_SLAVE, s5pc100_pdma0_pdata.cap_mask); dma_cap_set(DMA_CYCLIC, s5pc100_pdma0_pdata.cap_mask); - amba_device_register(&s5pc100_device_pdma0, &iomem_resource); + amba_device_register(&s5pc100_pdma0_device, &iomem_resource); dma_cap_set(DMA_SLAVE, s5pc100_pdma1_pdata.cap_mask); dma_cap_set(DMA_CYCLIC, s5pc100_pdma1_pdata.cap_mask); - amba_device_register(&s5pc100_device_pdma1, &iomem_resource); + amba_device_register(&s5pc100_pdma1_device, &iomem_resource); return 0; } diff --git a/arch/arm/mach-s5pc100/include/mach/system.h b/arch/arm/mach-s5pc100/include/mach/system.h deleted file mode 100644 index afc96c29851..00000000000 --- a/arch/arm/mach-s5pc100/include/mach/system.h +++ /dev/null @@ -1,19 +0,0 @@ -/* linux/arch/arm/mach-s5pc100/include/mach/system.h - * - * Copyright 2009 Samsung Electronics Co. - * Byungho Min <bhmin@samsung.com> - * - * S5PC100 - system implementation - * - * Based on mach-s3c6400/include/mach/system.h - */ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H __FILE__ - -static void arch_idle(void) -{ - /* nothing here yet */ -} - -#endif /* __ASM_ARCH_IRQ_H */ diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c index c78dfddd77f..b9ec0c35379 100644 --- a/arch/arm/mach-s5pv210/clock.c +++ b/arch/arm/mach-s5pv210/clock.c @@ -175,7 +175,7 @@ static int s5pv210_clk_mask1_ctrl(struct clk *clk, int enable) return s5p_gatectrl(S5P_CLK_SRC_MASK1, clk, enable); } -static int exynos4_clk_hdmiphy_ctrl(struct clk *clk, int enable) +static int s5pv210_clk_hdmiphy_ctrl(struct clk *clk, int enable) { return s5p_gatectrl(S5P_HDMI_PHY_CONTROL, clk, enable); } @@ -372,7 +372,7 @@ static struct clk init_clocks_off[] = { }, { .name = "hdmiphy", .devname = "s5pv210-hdmi", - .enable = exynos4_clk_hdmiphy_ctrl, + .enable = s5pv210_clk_hdmiphy_ctrl, .ctrlbit = (1 << 0), }, { .name = "dacphy", diff --git a/arch/arm/mach-s5pv210/common.c b/arch/arm/mach-s5pv210/common.c index 9c1bcdcc12c..4c9e9027df9 100644 --- a/arch/arm/mach-s5pv210/common.c +++ b/arch/arm/mach-s5pv210/common.c @@ -142,14 +142,6 @@ static struct map_desc s5pv210_iodesc[] __initdata = { } }; -static void s5pv210_idle(void) -{ - if (!need_resched()) - cpu_do_idle(); - - local_irq_enable(); -} - void s5pv210_restart(char mode, const char *cmd) { __raw_writel(0x1, S5P_SWRESET); @@ -247,10 +239,6 @@ core_initcall(s5pv210_core_init); int __init s5pv210_init(void) { printk(KERN_INFO "S5PV210: Initializing architecture\n"); - - /* set idle function */ - pm_idle = s5pv210_idle; - return device_register(&s5pv210_dev); } diff --git a/arch/arm/mach-s5pv210/dma.c b/arch/arm/mach-s5pv210/dma.c index a6113e0267f..f6885d247d1 100644 --- a/arch/arm/mach-s5pv210/dma.c +++ b/arch/arm/mach-s5pv210/dma.c @@ -71,21 +71,8 @@ struct dma_pl330_platdata s5pv210_pdma0_pdata = { .peri_id = pdma0_peri, }; -struct amba_device s5pv210_device_pdma0 = { - .dev = { - .init_name = "dma-pl330.0", - .dma_mask = &dma_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &s5pv210_pdma0_pdata, - }, - .res = { - .start = S5PV210_PA_PDMA0, - .end = S5PV210_PA_PDMA0 + SZ_4K, - .flags = IORESOURCE_MEM, - }, - .irq = {IRQ_PDMA0, NO_IRQ}, - .periphid = 0x00041330, -}; +AMBA_AHB_DEVICE(s5pv210_pdma0, "dma-pl330.0", 0x00041330, S5PV210_PA_PDMA0, + {IRQ_PDMA0}, &s5pv210_pdma0_pdata); u8 pdma1_peri[] = { DMACH_UART0_RX, @@ -127,31 +114,18 @@ struct dma_pl330_platdata s5pv210_pdma1_pdata = { .peri_id = pdma1_peri, }; -struct amba_device s5pv210_device_pdma1 = { - .dev = { - .init_name = "dma-pl330.1", - .dma_mask = &dma_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &s5pv210_pdma1_pdata, - }, - .res = { - .start = S5PV210_PA_PDMA1, - .end = S5PV210_PA_PDMA1 + SZ_4K, - .flags = IORESOURCE_MEM, - }, - .irq = {IRQ_PDMA1, NO_IRQ}, - .periphid = 0x00041330, -}; +AMBA_AHB_DEVICE(s5pv210_pdma1, "dma-pl330.1", 0x00041330, S5PV210_PA_PDMA1, + {IRQ_PDMA1}, &s5pv210_pdma1_pdata); static int __init s5pv210_dma_init(void) { dma_cap_set(DMA_SLAVE, s5pv210_pdma0_pdata.cap_mask); dma_cap_set(DMA_CYCLIC, s5pv210_pdma0_pdata.cap_mask); - amba_device_register(&s5pv210_device_pdma0, &iomem_resource); + amba_device_register(&s5pv210_pdma0_device, &iomem_resource); dma_cap_set(DMA_SLAVE, s5pv210_pdma1_pdata.cap_mask); dma_cap_set(DMA_CYCLIC, s5pv210_pdma1_pdata.cap_mask); - amba_device_register(&s5pv210_device_pdma1, &iomem_resource); + amba_device_register(&s5pv210_pdma1_device, &iomem_resource); return 0; } diff --git a/arch/arm/mach-s5pv210/include/mach/system.h b/arch/arm/mach-s5pv210/include/mach/system.h deleted file mode 100644 index bf288ced860..00000000000 --- a/arch/arm/mach-s5pv210/include/mach/system.h +++ /dev/null @@ -1,21 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/include/mach/system.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5PV210 - system support header - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H __FILE__ - -static void arch_idle(void) -{ - /* nothing here yet */ -} - -#endif /* __ASM_ARCH_SYSTEM_H */ diff --git a/arch/arm/mach-s5pv210/pm.c b/arch/arm/mach-s5pv210/pm.c index 677c71c41e5..736bfb103cb 100644 --- a/arch/arm/mach-s5pv210/pm.c +++ b/arch/arm/mach-s5pv210/pm.c @@ -133,7 +133,7 @@ static void s5pv210_pm_prepare(void) s3c_pm_do_save(s5pv210_core_save, ARRAY_SIZE(s5pv210_core_save)); } -static int s5pv210_pm_add(struct device *dev) +static int s5pv210_pm_add(struct device *dev, struct subsys_interface *sif) { pm_cpu_prep = s5pv210_pm_prepare; pm_cpu_sleep = s5pv210_cpu_suspend; diff --git a/arch/arm/mach-sa1100/include/mach/system.h b/arch/arm/mach-sa1100/include/mach/system.h deleted file mode 100644 index e17b208f76d..00000000000 --- a/arch/arm/mach-sa1100/include/mach/system.h +++ /dev/null @@ -1,9 +0,0 @@ -/* - * arch/arm/mach-sa1100/include/mach/system.h - * - * Copyright (c) 1999 Nicolas Pitre <nico@fluxnic.net> - */ -static inline void arch_idle(void) -{ - cpu_do_idle(); -} diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c index a851c254ad6..6a2a7f2c255 100644 --- a/arch/arm/mach-shark/core.c +++ b/arch/arm/mach-shark/core.c @@ -149,10 +149,16 @@ static struct sys_timer shark_timer = { .init = shark_timer_init, }; +static void shark_init_early(void) +{ + disable_hlt(); +} + MACHINE_START(SHARK, "Shark") /* Maintainer: Alexander Schulz */ .atag_offset = 0x3000, .map_io = shark_map_io, + .init_early = shark_init_early, .init_irq = shark_init_irq, .timer = &shark_timer, .dma_zone_size = SZ_4M, diff --git a/arch/arm/mach-shark/include/mach/system.h b/arch/arm/mach-shark/include/mach/system.h deleted file mode 100644 index 1b2f2c5050a..00000000000 --- a/arch/arm/mach-shark/include/mach/system.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * arch/arm/mach-shark/include/mach/system.h - * - * by Alexander Schulz - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static inline void arch_idle(void) -{ -} - -#endif diff --git a/arch/arm/mach-shmobile/include/mach/system.h b/arch/arm/mach-shmobile/include/mach/system.h index 956ac18ddbf..3bbcb3fa077 100644 --- a/arch/arm/mach-shmobile/include/mach/system.h +++ b/arch/arm/mach-shmobile/include/mach/system.h @@ -1,11 +1,6 @@ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - static inline void arch_reset(char mode, const char *cmd) { soft_restart(0); diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c index 6fcf304d3cd..a83cf51fc09 100644 --- a/arch/arm/mach-shmobile/setup-sh7372.c +++ b/arch/arm/mach-shmobile/setup-sh7372.c @@ -662,6 +662,7 @@ static struct sh_dmae_pdata usb_dma0_platform_data = { .dmaor_is_32bit = 1, .needs_tend_set = 1, .no_dmars = 1, + .slave_only = 1, }; static struct resource sh7372_usb_dmae0_resources[] = { @@ -723,6 +724,7 @@ static struct sh_dmae_pdata usb_dma1_platform_data = { .dmaor_is_32bit = 1, .needs_tend_set = 1, .no_dmars = 1, + .slave_only = 1, }; static struct resource sh7372_usb_dmae1_resources[] = { diff --git a/arch/arm/mach-spear3xx/include/mach/system.h b/arch/arm/mach-spear3xx/include/mach/system.h deleted file mode 100644 index 92cee6335c9..00000000000 --- a/arch/arm/mach-spear3xx/include/mach/system.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-spear3xx/include/mach/system.h - * - * SPEAr3xx Machine family specific architecture functions - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __MACH_SYSTEM_H -#define __MACH_SYSTEM_H - -#include <plat/system.h> - -#endif /* __MACH_SYSTEM_H */ diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c index a5e46b4ade2..9da50e281e9 100644 --- a/arch/arm/mach-spear3xx/spear300.c +++ b/arch/arm/mach-spear3xx/spear300.c @@ -430,18 +430,8 @@ static struct pl061_platform_data gpio1_plat_data = { .irq_base = SPEAR300_GPIO1_INT_BASE, }; -struct amba_device spear300_gpio1_device = { - .dev = { - .init_name = "gpio1", - .platform_data = &gpio1_plat_data, - }, - .res = { - .start = SPEAR300_GPIO_BASE, - .end = SPEAR300_GPIO_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = {SPEAR300_VIRQ_GPIO1, NO_IRQ}, -}; +AMBA_APB_DEVICE(spear300_gpio1, "gpio1", 0, SPEAR300_GPIO_BASE, + {SPEAR300_VIRQ_GPIO1}, &gpio1_plat_data); /* spear300 routines */ void __init spear300_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs, diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c index 10af45da86a..b1733c37f20 100644 --- a/arch/arm/mach-spear3xx/spear3xx.c +++ b/arch/arm/mach-spear3xx/spear3xx.c @@ -28,31 +28,12 @@ static struct pl061_platform_data gpio_plat_data = { .irq_base = SPEAR3XX_GPIO_INT_BASE, }; -struct amba_device spear3xx_gpio_device = { - .dev = { - .init_name = "gpio", - .platform_data = &gpio_plat_data, - }, - .res = { - .start = SPEAR3XX_ICM3_GPIO_BASE, - .end = SPEAR3XX_ICM3_GPIO_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = {SPEAR3XX_IRQ_BASIC_GPIO, NO_IRQ}, -}; +AMBA_APB_DEVICE(spear3xx_gpio, "gpio", 0, SPEAR3XX_ICM3_GPIO_BASE, + {SPEAR3XX_IRQ_BASIC_GPIO}, &gpio_plat_data); /* uart device registration */ -struct amba_device spear3xx_uart_device = { - .dev = { - .init_name = "uart", - }, - .res = { - .start = SPEAR3XX_ICM1_UART_BASE, - .end = SPEAR3XX_ICM1_UART_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = {SPEAR3XX_IRQ_UART, NO_IRQ}, -}; +AMBA_APB_DEVICE(spear3xx_uart, "uart", 0, SPEAR3XX_ICM1_UART_BASE, + {SPEAR3XX_IRQ_UART}, NULL); /* Do spear3xx familiy common initialization part here */ void __init spear3xx_init(void) diff --git a/arch/arm/mach-spear6xx/include/mach/system.h b/arch/arm/mach-spear6xx/include/mach/system.h deleted file mode 100644 index 0b1d2be81cf..00000000000 --- a/arch/arm/mach-spear6xx/include/mach/system.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-spear6xx/include/mach/system.h - * - * SPEAr6xx Machine family specific architecture functions - * - * Copyright (C) 2009 ST Microelectronics - * Rajeev Kumar<rajeev-dlh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __MACH_SYSTEM_H -#define __MACH_SYSTEM_H - -#include <plat/system.h> - -#endif /* __MACH_SYSTEM_H */ diff --git a/arch/arm/mach-spear6xx/spear6xx.c b/arch/arm/mach-spear6xx/spear6xx.c index e0f6628c8b2..b997b1b10ba 100644 --- a/arch/arm/mach-spear6xx/spear6xx.c +++ b/arch/arm/mach-spear6xx/spear6xx.c @@ -34,7 +34,7 @@ struct amba_device uart_device[] = { .end = SPEAR6XX_ICM1_UART0_BASE + SZ_4K - 1, .flags = IORESOURCE_MEM, }, - .irq = {IRQ_UART_0, NO_IRQ}, + .irq = {IRQ_UART_0}, }, { .dev = { .init_name = "uart1", @@ -44,7 +44,7 @@ struct amba_device uart_device[] = { .end = SPEAR6XX_ICM1_UART1_BASE + SZ_4K - 1, .flags = IORESOURCE_MEM, }, - .irq = {IRQ_UART_1, NO_IRQ}, + .irq = {IRQ_UART_1}, } }; @@ -73,7 +73,7 @@ struct amba_device gpio_device[] = { .end = SPEAR6XX_CPU_GPIO_BASE + SZ_4K - 1, .flags = IORESOURCE_MEM, }, - .irq = {IRQ_LOCAL_GPIO, NO_IRQ}, + .irq = {IRQ_LOCAL_GPIO}, }, { .dev = { .init_name = "gpio1", @@ -84,7 +84,7 @@ struct amba_device gpio_device[] = { .end = SPEAR6XX_ICM3_GPIO_BASE + SZ_4K - 1, .flags = IORESOURCE_MEM, }, - .irq = {IRQ_BASIC_GPIO, NO_IRQ}, + .irq = {IRQ_BASIC_GPIO}, }, { .dev = { .init_name = "gpio2", @@ -95,7 +95,7 @@ struct amba_device gpio_device[] = { .end = SPEAR6XX_ICM2_GPIO_BASE + SZ_4K - 1, .flags = IORESOURCE_MEM, }, - .irq = {IRQ_APPL_GPIO, NO_IRQ}, + .irq = {IRQ_APPL_GPIO}, } }; diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c index fcf4f377b1d..330afdfa247 100644 --- a/arch/arm/mach-tegra/board-paz00.c +++ b/arch/arm/mach-tegra/board-paz00.c @@ -60,9 +60,9 @@ static struct plat_serial8250_port debug_uart_platform_data[] = { .uartclk = 216000000, }, { /* serial port on mini-pcie */ - .membase = IO_ADDRESS(TEGRA_UARTD_BASE), - .mapbase = TEGRA_UARTD_BASE, - .irq = INT_UARTD, + .membase = IO_ADDRESS(TEGRA_UARTC_BASE), + .mapbase = TEGRA_UARTC_BASE, + .irq = INT_UARTC, .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE, .type = PORT_TEGRA, .iotype = UPIO_MEM, @@ -174,7 +174,7 @@ static void __init tegra_paz00_fixup(struct tag *tags, char **cmdline, static __initdata struct tegra_clk_init_table paz00_clk_init_table[] = { /* name parent rate enabled */ { "uarta", "pll_p", 216000000, true }, - { "uartd", "pll_p", 216000000, true }, + { "uartc", "pll_p", 216000000, true }, { "pll_p_out4", "pll_p", 24000000, true }, { "usbd", "clk_m", 12000000, false }, diff --git a/arch/arm/mach-tegra/board-paz00.h b/arch/arm/mach-tegra/board-paz00.h index ffa83f580db..3c9f8da37ea 100644 --- a/arch/arm/mach-tegra/board-paz00.h +++ b/arch/arm/mach-tegra/board-paz00.h @@ -22,7 +22,7 @@ /* SDCARD */ #define TEGRA_GPIO_SD1_CD TEGRA_GPIO_PV5 #define TEGRA_GPIO_SD1_WP TEGRA_GPIO_PH1 -#define TEGRA_GPIO_SD1_POWER TEGRA_GPIO_PT3 +#define TEGRA_GPIO_SD1_POWER TEGRA_GPIO_PV1 /* ULPI */ #define TEGRA_ULPI_RST TEGRA_GPIO_PV0 diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c index a2eb90169ae..2db20da1d58 100644 --- a/arch/arm/mach-tegra/common.c +++ b/arch/arm/mach-tegra/common.c @@ -27,7 +27,6 @@ #include <asm/hardware/gic.h> #include <mach/iomap.h> -#include <mach/system.h> #include "board.h" #include "clock.h" @@ -96,6 +95,8 @@ static void __init tegra_init_cache(u32 tag_latency, u32 data_latency) #ifdef CONFIG_ARCH_TEGRA_2x_SOC void __init tegra20_init_early(void) { + disable_hlt(); /* idle WFI usage needs to be confirmed */ + tegra_init_fuse(); tegra2_init_clocks(); tegra_clk_init_from_table(tegra20_clk_init_table); diff --git a/arch/arm/mach-tegra/include/mach/dma.h b/arch/arm/mach-tegra/include/mach/dma.h index d0132e8031a..3c9339058be 100644 --- a/arch/arm/mach-tegra/include/mach/dma.h +++ b/arch/arm/mach-tegra/include/mach/dma.h @@ -23,11 +23,6 @@ #include <linux/list.h> -#if defined(CONFIG_TEGRA_SYSTEM_DMA) - -struct tegra_dma_req; -struct tegra_dma_channel; - #define TEGRA_DMA_REQ_SEL_CNTR 0 #define TEGRA_DMA_REQ_SEL_I2S_2 1 #define TEGRA_DMA_REQ_SEL_I2S_1 2 @@ -56,6 +51,11 @@ struct tegra_dma_channel; #define TEGRA_DMA_REQ_SEL_OWR 25 #define TEGRA_DMA_REQ_SEL_INVALID 31 +#if defined(CONFIG_TEGRA_SYSTEM_DMA) + +struct tegra_dma_req; +struct tegra_dma_channel; + enum tegra_dma_mode { TEGRA_DMA_SHARED = 1, TEGRA_DMA_MODE_CONTINOUS = 2, diff --git a/arch/arm/mach-tegra/include/mach/system.h b/arch/arm/mach-tegra/include/mach/system.h deleted file mode 100644 index a312988bf6f..00000000000 --- a/arch/arm/mach-tegra/include/mach/system.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * arch/arm/mach-tegra/include/mach/system.h - * - * Copyright (C) 2010 Google, Inc. - * - * Author: - * Colin Cross <ccross@google.com> - * Erik Gilling <konkers@google.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __MACH_TEGRA_SYSTEM_H -#define __MACH_TEGRA_SYSTEM_H - -static inline void arch_idle(void) -{ -} - -#endif diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c index b4c6926a700..b9865605da0 100644 --- a/arch/arm/mach-u300/core.c +++ b/arch/arm/mach-u300/core.c @@ -94,19 +94,9 @@ static struct amba_pl011_data uart0_plat_data = { #endif }; -static struct amba_device uart0_device = { - .dev = { - .coherent_dma_mask = ~0, - .init_name = "uart0", /* Slow device at 0x3000 offset */ - .platform_data = &uart0_plat_data, - }, - .res = { - .start = U300_UART0_BASE, - .end = U300_UART0_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = { IRQ_U300_UART0, NO_IRQ }, -}; +/* Slow device at 0x3000 offset */ +static AMBA_APB_DEVICE(uart0, "uart0", 0, U300_UART0_BASE, + { IRQ_U300_UART0 }, &uart0_plat_data); /* The U335 have an additional UART1 on the APP CPU */ #ifdef CONFIG_MACH_U300_BS335 @@ -118,71 +108,28 @@ static struct amba_pl011_data uart1_plat_data = { #endif }; -static struct amba_device uart1_device = { - .dev = { - .coherent_dma_mask = ~0, - .init_name = "uart1", /* Fast device at 0x7000 offset */ - .platform_data = &uart1_plat_data, - }, - .res = { - .start = U300_UART1_BASE, - .end = U300_UART1_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = { IRQ_U300_UART1, NO_IRQ }, -}; +/* Fast device at 0x7000 offset */ +static AMBA_APB_DEVICE(uart1, "uart1", 0, U300_UART1_BASE, + { IRQ_U300_UART1 }, &uart1_plat_data); #endif -static struct amba_device pl172_device = { - .dev = { - .init_name = "pl172", /* AHB device at 0x4000 offset */ - .platform_data = NULL, - }, - .res = { - .start = U300_EMIF_CFG_BASE, - .end = U300_EMIF_CFG_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, -}; +/* AHB device at 0x4000 offset */ +static AMBA_APB_DEVICE(pl172, "pl172", 0, U300_EMIF_CFG_BASE, { }, NULL); /* * Everything within this next ifdef deals with external devices connected to * the APP SPI bus. */ -static struct amba_device pl022_device = { - .dev = { - .coherent_dma_mask = ~0, - .init_name = "pl022", /* Fast device at 0x6000 offset */ - }, - .res = { - .start = U300_SPI_BASE, - .end = U300_SPI_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = {IRQ_U300_SPI, NO_IRQ }, - /* - * This device has a DMA channel but the Linux driver does not use - * it currently. - */ -}; +/* Fast device at 0x6000 offset */ +static AMBA_APB_DEVICE(pl022, "pl022", 0, U300_SPI_BASE, + { IRQ_U300_SPI }, NULL); -static struct amba_device mmcsd_device = { - .dev = { - .init_name = "mmci", /* Fast device at 0x1000 offset */ - .platform_data = NULL, /* Added later */ - }, - .res = { - .start = U300_MMCSD_BASE, - .end = U300_MMCSD_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = {IRQ_U300_MMCSD_MCIINTR0, IRQ_U300_MMCSD_MCIINTR1 }, - /* - * This device has a DMA channel but the Linux driver does not use - * it currently. - */ -}; +/* Fast device at 0x1000 offset */ +#define U300_MMCSD_IRQS { IRQ_U300_MMCSD_MCIINTR0, IRQ_U300_MMCSD_MCIINTR1 } + +static AMBA_APB_DEVICE(mmcsd, "mmci", 0, U300_MMCSD_BASE, + U300_MMCSD_IRQS, NULL); /* * The order of device declaration may be important, since some devices diff --git a/arch/arm/mach-u300/include/mach/system.h b/arch/arm/mach-u300/include/mach/system.h deleted file mode 100644 index 574d46e3829..00000000000 --- a/arch/arm/mach-u300/include/mach/system.h +++ /dev/null @@ -1,14 +0,0 @@ -/* - * - * arch/arm/mach-u300/include/mach/system.h - * - * - * Copyright (C) 2007-2009 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * System shutdown and reset functions. - * Author: Linus Walleij <linus.walleij@stericsson.com> - */ -static inline void arch_idle(void) -{ - cpu_do_idle(); -} diff --git a/arch/arm/mach-ux500/devices-common.c b/arch/arm/mach-ux500/devices-common.c index c563e5418d8..898a64517b0 100644 --- a/arch/arm/mach-ux500/devices-common.c +++ b/arch/arm/mach-ux500/devices-common.c @@ -26,29 +26,22 @@ dbx500_add_amba_device(const char *name, resource_size_t base, struct amba_device *dev; int ret; - dev = kzalloc(sizeof *dev, GFP_KERNEL); + dev = amba_device_alloc(name, base, SZ_4K); if (!dev) return ERR_PTR(-ENOMEM); - dev->dev.init_name = name; - - dev->res.start = base; - dev->res.end = base + SZ_4K - 1; - dev->res.flags = IORESOURCE_MEM; - dev->dma_mask = DMA_BIT_MASK(32); dev->dev.coherent_dma_mask = DMA_BIT_MASK(32); dev->irq[0] = irq; - dev->irq[1] = NO_IRQ; dev->periphid = periphid; dev->dev.platform_data = pdata; - ret = amba_device_register(dev, &iomem_resource); + ret = amba_device_add(dev, &iomem_resource); if (ret) { - kfree(dev); + amba_device_put(dev); return ERR_PTR(ret); } diff --git a/arch/arm/mach-ux500/include/mach/system.h b/arch/arm/mach-ux500/include/mach/system.h deleted file mode 100644 index 258e5c919c2..00000000000 --- a/arch/arm/mach-ux500/include/mach/system.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * Copyright (C) 2009 ST-Ericsson. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static inline void arch_idle(void) -{ - /* - * This should do all the clock switching - * and wait for interrupt tricks - */ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index 02b7b9303f3..4f352e45be0 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -582,58 +582,58 @@ static struct pl022_ssp_controller ssp0_plat_data = { .num_chipselect = 1, }; -#define AACI_IRQ { IRQ_AACI, NO_IRQ } +#define AACI_IRQ { IRQ_AACI } #define MMCI0_IRQ { IRQ_MMCI0A,IRQ_SIC_MMCI0B } -#define KMI0_IRQ { IRQ_SIC_KMI0, NO_IRQ } -#define KMI1_IRQ { IRQ_SIC_KMI1, NO_IRQ } +#define KMI0_IRQ { IRQ_SIC_KMI0 } +#define KMI1_IRQ { IRQ_SIC_KMI1 } /* * These devices are connected directly to the multi-layer AHB switch */ -#define SMC_IRQ { NO_IRQ, NO_IRQ } -#define MPMC_IRQ { NO_IRQ, NO_IRQ } -#define CLCD_IRQ { IRQ_CLCDINT, NO_IRQ } -#define DMAC_IRQ { IRQ_DMAINT, NO_IRQ } +#define SMC_IRQ { } +#define MPMC_IRQ { } +#define CLCD_IRQ { IRQ_CLCDINT } +#define DMAC_IRQ { IRQ_DMAINT } /* * These devices are connected via the core APB bridge */ -#define SCTL_IRQ { NO_IRQ, NO_IRQ } -#define WATCHDOG_IRQ { IRQ_WDOGINT, NO_IRQ } -#define GPIO0_IRQ { IRQ_GPIOINT0, NO_IRQ } -#define GPIO1_IRQ { IRQ_GPIOINT1, NO_IRQ } -#define RTC_IRQ { IRQ_RTCINT, NO_IRQ } +#define SCTL_IRQ { } +#define WATCHDOG_IRQ { IRQ_WDOGINT } +#define GPIO0_IRQ { IRQ_GPIOINT0 } +#define GPIO1_IRQ { IRQ_GPIOINT1 } +#define RTC_IRQ { IRQ_RTCINT } /* * These devices are connected via the DMA APB bridge */ -#define SCI_IRQ { IRQ_SCIINT, NO_IRQ } -#define UART0_IRQ { IRQ_UARTINT0, NO_IRQ } -#define UART1_IRQ { IRQ_UARTINT1, NO_IRQ } -#define UART2_IRQ { IRQ_UARTINT2, NO_IRQ } -#define SSP_IRQ { IRQ_SSPINT, NO_IRQ } +#define SCI_IRQ { IRQ_SCIINT } +#define UART0_IRQ { IRQ_UARTINT0 } +#define UART1_IRQ { IRQ_UARTINT1 } +#define UART2_IRQ { IRQ_UARTINT2 } +#define SSP_IRQ { IRQ_SSPINT } /* FPGA Primecells */ -AMBA_DEVICE(aaci, "fpga:04", AACI, NULL); -AMBA_DEVICE(mmc0, "fpga:05", MMCI0, &mmc0_plat_data); -AMBA_DEVICE(kmi0, "fpga:06", KMI0, NULL); -AMBA_DEVICE(kmi1, "fpga:07", KMI1, NULL); +APB_DEVICE(aaci, "fpga:04", AACI, NULL); +APB_DEVICE(mmc0, "fpga:05", MMCI0, &mmc0_plat_data); +APB_DEVICE(kmi0, "fpga:06", KMI0, NULL); +APB_DEVICE(kmi1, "fpga:07", KMI1, NULL); /* DevChip Primecells */ -AMBA_DEVICE(smc, "dev:00", SMC, NULL); -AMBA_DEVICE(mpmc, "dev:10", MPMC, NULL); -AMBA_DEVICE(clcd, "dev:20", CLCD, &clcd_plat_data); -AMBA_DEVICE(dmac, "dev:30", DMAC, NULL); -AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL); -AMBA_DEVICE(wdog, "dev:e1", WATCHDOG, NULL); -AMBA_DEVICE(gpio0, "dev:e4", GPIO0, &gpio0_plat_data); -AMBA_DEVICE(gpio1, "dev:e5", GPIO1, &gpio1_plat_data); -AMBA_DEVICE(rtc, "dev:e8", RTC, NULL); -AMBA_DEVICE(sci0, "dev:f0", SCI, NULL); -AMBA_DEVICE(uart0, "dev:f1", UART0, NULL); -AMBA_DEVICE(uart1, "dev:f2", UART1, NULL); -AMBA_DEVICE(uart2, "dev:f3", UART2, NULL); -AMBA_DEVICE(ssp0, "dev:f4", SSP, &ssp0_plat_data); +AHB_DEVICE(smc, "dev:00", SMC, NULL); +AHB_DEVICE(mpmc, "dev:10", MPMC, NULL); +AHB_DEVICE(clcd, "dev:20", CLCD, &clcd_plat_data); +AHB_DEVICE(dmac, "dev:30", DMAC, NULL); +APB_DEVICE(sctl, "dev:e0", SCTL, NULL); +APB_DEVICE(wdog, "dev:e1", WATCHDOG, NULL); +APB_DEVICE(gpio0, "dev:e4", GPIO0, &gpio0_plat_data); +APB_DEVICE(gpio1, "dev:e5", GPIO1, &gpio1_plat_data); +APB_DEVICE(rtc, "dev:e8", RTC, NULL); +APB_DEVICE(sci0, "dev:f0", SCI, NULL); +APB_DEVICE(uart0, "dev:f1", UART0, NULL); +APB_DEVICE(uart1, "dev:f2", UART1, NULL); +APB_DEVICE(uart2, "dev:f3", UART2, NULL); +APB_DEVICE(ssp0, "dev:f4", SSP, &ssp0_plat_data); static struct amba_device *amba_devs[] __initdata = { &dmac_device, diff --git a/arch/arm/mach-versatile/core.h b/arch/arm/mach-versatile/core.h index 2ef2f555f31..683e60776a8 100644 --- a/arch/arm/mach-versatile/core.h +++ b/arch/arm/mach-versatile/core.h @@ -36,20 +36,10 @@ extern unsigned int mmc_status(struct device *dev); extern struct of_dev_auxdata versatile_auxdata_lookup[]; #endif -#define AMBA_DEVICE(name,busid,base,plat) \ -static struct amba_device name##_device = { \ - .dev = { \ - .coherent_dma_mask = ~0, \ - .init_name = busid, \ - .platform_data = plat, \ - }, \ - .res = { \ - .start = VERSATILE_##base##_BASE, \ - .end = (VERSATILE_##base##_BASE) + SZ_4K - 1,\ - .flags = IORESOURCE_MEM, \ - }, \ - .dma_mask = ~0, \ - .irq = base##_IRQ, \ -} +#define APB_DEVICE(name, busid, base, plat) \ +static AMBA_APB_DEVICE(name, busid, 0, VERSATILE_##base##_BASE, base##_IRQ, plat) + +#define AHB_DEVICE(name, busid, base, plat) \ +static AMBA_AHB_DEVICE(name, busid, 0, VERSATILE_##base##_BASE, base##_IRQ, plat) #endif diff --git a/arch/arm/mach-versatile/include/mach/system.h b/arch/arm/mach-versatile/include/mach/system.h deleted file mode 100644 index f3fa347895f..00000000000 --- a/arch/arm/mach-versatile/include/mach/system.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * arch/arm/mach-versatile/include/mach/system.h - * - * Copyright (C) 2003 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static inline void arch_idle(void) -{ - /* - * This should do all the clock switching - * and wait for interrupt tricks - */ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c index 9581c197500..19738331bd3 100644 --- a/arch/arm/mach-versatile/versatile_pb.c +++ b/arch/arm/mach-versatile/versatile_pb.c @@ -58,28 +58,28 @@ static struct pl061_platform_data gpio3_plat_data = { .irq_base = IRQ_GPIO3_START, }; -#define UART3_IRQ { IRQ_SIC_UART3, NO_IRQ } -#define SCI1_IRQ { IRQ_SIC_SCI3, NO_IRQ } +#define UART3_IRQ { IRQ_SIC_UART3 } +#define SCI1_IRQ { IRQ_SIC_SCI3 } #define MMCI1_IRQ { IRQ_MMCI1A, IRQ_SIC_MMCI1B } /* * These devices are connected via the core APB bridge */ -#define GPIO2_IRQ { IRQ_GPIOINT2, NO_IRQ } -#define GPIO3_IRQ { IRQ_GPIOINT3, NO_IRQ } +#define GPIO2_IRQ { IRQ_GPIOINT2 } +#define GPIO3_IRQ { IRQ_GPIOINT3 } /* * These devices are connected via the DMA APB bridge */ /* FPGA Primecells */ -AMBA_DEVICE(uart3, "fpga:09", UART3, NULL); -AMBA_DEVICE(sci1, "fpga:0a", SCI1, NULL); -AMBA_DEVICE(mmc1, "fpga:0b", MMCI1, &mmc1_plat_data); +APB_DEVICE(uart3, "fpga:09", UART3, NULL); +APB_DEVICE(sci1, "fpga:0a", SCI1, NULL); +APB_DEVICE(mmc1, "fpga:0b", MMCI1, &mmc1_plat_data); /* DevChip Primecells */ -AMBA_DEVICE(gpio2, "dev:e6", GPIO2, &gpio2_plat_data); -AMBA_DEVICE(gpio3, "dev:e7", GPIO3, &gpio3_plat_data); +APB_DEVICE(gpio2, "dev:e6", GPIO2, &gpio2_plat_data); +APB_DEVICE(gpio3, "dev:e7", GPIO3, &gpio3_plat_data); static struct amba_device *amba_devs[] __initdata = { &uart3_device, diff --git a/arch/arm/mach-vexpress/core.h b/arch/arm/mach-vexpress/core.h index f4397159c17..9f0f2827c71 100644 --- a/arch/arm/mach-vexpress/core.h +++ b/arch/arm/mach-vexpress/core.h @@ -1,19 +1,2 @@ #define __MMIO_P2V(x) (((x) & 0xfffff) | (((x) & 0x0f000000) >> 4) | 0xf8000000) #define MMIO_P2V(x) ((void __iomem *)__MMIO_P2V(x)) - -#define AMBA_DEVICE(name,busid,base,plat) \ -struct amba_device name##_device = { \ - .dev = { \ - .coherent_dma_mask = ~0UL, \ - .init_name = busid, \ - .platform_data = plat, \ - }, \ - .res = { \ - .start = base, \ - .end = base + SZ_4K - 1, \ - .flags = IORESOURCE_MEM, \ - }, \ - .dma_mask = ~0UL, \ - .irq = IRQ_##base, \ - /* .dma = DMA_##base,*/ \ -} diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c index b1e87c184e5..1b1d2e4892b 100644 --- a/arch/arm/mach-vexpress/ct-ca9x4.c +++ b/arch/arm/mach-vexpress/ct-ca9x4.c @@ -109,10 +109,10 @@ static struct clcd_board ct_ca9x4_clcd_data = { .remove = versatile_clcd_remove_dma, }; -static AMBA_DEVICE(clcd, "ct:clcd", CT_CA9X4_CLCDC, &ct_ca9x4_clcd_data); -static AMBA_DEVICE(dmc, "ct:dmc", CT_CA9X4_DMC, NULL); -static AMBA_DEVICE(smc, "ct:smc", CT_CA9X4_SMC, NULL); -static AMBA_DEVICE(gpio, "ct:gpio", CT_CA9X4_GPIO, NULL); +static AMBA_AHB_DEVICE(clcd, "ct:clcd", 0, CT_CA9X4_CLCDC, IRQ_CT_CA9X4_CLCDC, &ct_ca9x4_clcd_data); +static AMBA_APB_DEVICE(dmc, "ct:dmc", 0, CT_CA9X4_DMC, IRQ_CT_CA9X4_DMC, NULL); +static AMBA_APB_DEVICE(smc, "ct:smc", 0, CT_CA9X4_SMC, IRQ_CT_CA9X4_SMC, NULL); +static AMBA_APB_DEVICE(gpio, "ct:gpio", 0, CT_CA9X4_GPIO, IRQ_CT_CA9X4_GPIO, NULL); static struct amba_device *ct_ca9x4_amba_devs[] __initdata = { &clcd_device, diff --git a/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h b/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h index a34d3d4faae..a40468f3b93 100644 --- a/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h +++ b/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h @@ -35,7 +35,7 @@ * Interrupts. Those in {} are for AMBA devices */ #define IRQ_CT_CA9X4_CLCDC { 76 } -#define IRQ_CT_CA9X4_DMC { -1 } +#define IRQ_CT_CA9X4_DMC { 0 } #define IRQ_CT_CA9X4_SMC { 77, 78 } #define IRQ_CT_CA9X4_TIMER0 80 #define IRQ_CT_CA9X4_TIMER1 81 diff --git a/arch/arm/mach-vexpress/include/mach/system.h b/arch/arm/mach-vexpress/include/mach/system.h deleted file mode 100644 index f653a8e265b..00000000000 --- a/arch/arm/mach-vexpress/include/mach/system.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * arch/arm/mach-vexpress/include/mach/system.h - * - * Copyright (C) 2003 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static inline void arch_idle(void) -{ - /* - * This should do all the clock switching - * and wait for interrupt tricks - */ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c index b4a28ca0e50..ad64f97a200 100644 --- a/arch/arm/mach-vexpress/v2m.c +++ b/arch/arm/mach-vexpress/v2m.c @@ -266,16 +266,16 @@ static struct mmci_platform_data v2m_mmci_data = { .status = v2m_mmci_status, }; -static AMBA_DEVICE(aaci, "mb:aaci", V2M_AACI, NULL); -static AMBA_DEVICE(mmci, "mb:mmci", V2M_MMCI, &v2m_mmci_data); -static AMBA_DEVICE(kmi0, "mb:kmi0", V2M_KMI0, NULL); -static AMBA_DEVICE(kmi1, "mb:kmi1", V2M_KMI1, NULL); -static AMBA_DEVICE(uart0, "mb:uart0", V2M_UART0, NULL); -static AMBA_DEVICE(uart1, "mb:uart1", V2M_UART1, NULL); -static AMBA_DEVICE(uart2, "mb:uart2", V2M_UART2, NULL); -static AMBA_DEVICE(uart3, "mb:uart3", V2M_UART3, NULL); -static AMBA_DEVICE(wdt, "mb:wdt", V2M_WDT, NULL); -static AMBA_DEVICE(rtc, "mb:rtc", V2M_RTC, NULL); +static AMBA_APB_DEVICE(aaci, "mb:aaci", 0, V2M_AACI, IRQ_V2M_AACI, NULL); +static AMBA_APB_DEVICE(mmci, "mb:mmci", 0, V2M_MMCI, IRQ_V2M_MMCI, &v2m_mmci_data); +static AMBA_APB_DEVICE(kmi0, "mb:kmi0", 0, V2M_KMI0, IRQ_V2M_KMI0, NULL); +static AMBA_APB_DEVICE(kmi1, "mb:kmi1", 0, V2M_KMI1, IRQ_V2M_KMI1, NULL); +static AMBA_APB_DEVICE(uart0, "mb:uart0", 0, V2M_UART0, IRQ_V2M_UART0, NULL); +static AMBA_APB_DEVICE(uart1, "mb:uart1", 0, V2M_UART1, IRQ_V2M_UART1, NULL); +static AMBA_APB_DEVICE(uart2, "mb:uart2", 0, V2M_UART2, IRQ_V2M_UART2, NULL); +static AMBA_APB_DEVICE(uart3, "mb:uart3", 0, V2M_UART3, IRQ_V2M_UART3, NULL); +static AMBA_APB_DEVICE(wdt, "mb:wdt", 0, V2M_WDT, IRQ_V2M_WDT, NULL); +static AMBA_APB_DEVICE(rtc, "mb:rtc", 0, V2M_RTC, IRQ_V2M_RTC, NULL); static struct amba_device *v2m_amba_devs[] __initdata = { &aaci_device, diff --git a/arch/arm/mach-vt8500/include/mach/system.h b/arch/arm/mach-vt8500/include/mach/system.h index d6c757eaf26..58fa8010ee6 100644 --- a/arch/arm/mach-vt8500/include/mach/system.h +++ b/arch/arm/mach-vt8500/include/mach/system.h @@ -7,11 +7,6 @@ /* PM Software Reset request register */ #define VT8500_PMSR_VIRT 0xf8130060 -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - static inline void arch_reset(char mode, const char *cmd) { writel(1, VT8500_PMSR_VIRT); diff --git a/arch/arm/mach-w90x900/dev.c b/arch/arm/mach-w90x900/dev.c index 78110befb7a..db82568a998 100644 --- a/arch/arm/mach-w90x900/dev.c +++ b/arch/arm/mach-w90x900/dev.c @@ -530,6 +530,7 @@ static struct platform_device *nuc900_public_dev[] __initdata = { void __init nuc900_board_init(struct platform_device **device, int size) { + disable_hlt(); platform_add_devices(device, size); platform_add_devices(nuc900_public_dev, ARRAY_SIZE(nuc900_public_dev)); spi_register_board_info(nuc900_spi_board_info, diff --git a/arch/arm/mach-w90x900/include/mach/system.h b/arch/arm/mach-w90x900/include/mach/system.h deleted file mode 100644 index 2aaeb931161..00000000000 --- a/arch/arm/mach-w90x900/include/mach/system.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-w90x900/include/mach/system.h - * - * Copyright (c) 2008 Nuvoton technology corporation - * All rights reserved. - * - * Wan ZongShun <mcuos.com@gmail.com> - * - * Based on arch/arm/mach-s3c2410/include/mach/system.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ -static void arch_idle(void) -{ -} diff --git a/arch/arm/mach-zynq/include/mach/system.h b/arch/arm/mach-zynq/include/mach/system.h deleted file mode 100644 index 8e88e0b8d2b..00000000000 --- a/arch/arm/mach-zynq/include/mach/system.h +++ /dev/null @@ -1,23 +0,0 @@ -/* arch/arm/mach-zynq/include/mach/system.h - * - * Copyright (C) 2011 Xilinx - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __MACH_SYSTEM_H__ -#define __MACH_SYSTEM_H__ - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S index 07c4bc8ea0a..7a24d39661f 100644 --- a/arch/arm/mm/cache-v7.S +++ b/arch/arm/mm/cache-v7.S @@ -54,9 +54,15 @@ loop1: and r1, r1, #7 @ mask of the bits for current cache only cmp r1, #2 @ see what cache we have at this level blt skip @ skip if no cache, or just i-cache +#ifdef CONFIG_PREEMPT + save_and_disable_irqs r9 @ make cssr&csidr read atomic +#endif mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr isb @ isb to sych the new cssr&csidr mrc p15, 1, r1, c0, c0, 0 @ read the new csidr +#ifdef CONFIG_PREEMPT + restore_irqs_notrace r9 +#endif and r2, r1, #7 @ extract the length of the cache lines add r2, r2, #4 @ add 4 (line length offset) ldr r4, =0x3ff diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c index ba159370fa5..80632e8d753 100644 --- a/arch/arm/mm/ioremap.c +++ b/arch/arm/mm/ioremap.c @@ -225,8 +225,7 @@ void __iomem * __arm_ioremap_pfn_caller(unsigned long pfn, if ((area->flags & VM_ARM_MTYPE_MASK) != VM_ARM_MTYPE(mtype)) continue; if (__phys_to_pfn(area->phys_addr) > pfn || - __pfn_to_phys(pfn) + offset + size-1 > - area->phys_addr + area->size-1) + __pfn_to_phys(pfn) + size-1 > area->phys_addr + area->size-1) continue; /* we can drop the lock here as we know *area is static */ read_unlock(&vmlist_lock); diff --git a/arch/arm/plat-mxc/audmux-v2.c b/arch/arm/plat-mxc/audmux-v2.c index 8cced35009b..0e51fc36b5b 100644 --- a/arch/arm/plat-mxc/audmux-v2.c +++ b/arch/arm/plat-mxc/audmux-v2.c @@ -73,13 +73,13 @@ static ssize_t audmux_read_file(struct file *file, char __user *user_buf, return -ENOMEM; if (audmux_clk) - clk_enable(audmux_clk); + clk_prepare_enable(audmux_clk); ptcr = readl(audmux_base + MXC_AUDMUX_V2_PTCR(port)); pdcr = readl(audmux_base + MXC_AUDMUX_V2_PDCR(port)); if (audmux_clk) - clk_disable(audmux_clk); + clk_disable_unprepare(audmux_clk); ret = snprintf(buf, PAGE_SIZE, "PDCR: %08x\nPTCR: %08x\n", pdcr, ptcr); @@ -172,13 +172,13 @@ int mxc_audmux_v2_configure_port(unsigned int port, unsigned int ptcr, return -ENOSYS; if (audmux_clk) - clk_enable(audmux_clk); + clk_prepare_enable(audmux_clk); writel(ptcr, audmux_base + MXC_AUDMUX_V2_PTCR(port)); writel(pdcr, audmux_base + MXC_AUDMUX_V2_PDCR(port)); if (audmux_clk) - clk_disable(audmux_clk); + clk_disable_unprepare(audmux_clk); return 0; } diff --git a/arch/arm/plat-mxc/devices/platform-ahci-imx.c b/arch/arm/plat-mxc/devices/platform-ahci-imx.c index d8a56aee521..ade4a1c4e2a 100644 --- a/arch/arm/plat-mxc/devices/platform-ahci-imx.c +++ b/arch/arm/plat-mxc/devices/platform-ahci-imx.c @@ -60,9 +60,9 @@ static int imx_sata_init(struct device *dev, void __iomem *addr) dev_err(dev, "no sata clock.\n"); return PTR_ERR(sata_clk); } - ret = clk_enable(sata_clk); + ret = clk_prepare_enable(sata_clk); if (ret) { - dev_err(dev, "can't enable sata clock.\n"); + dev_err(dev, "can't prepare/enable sata clock.\n"); goto put_sata_clk; } @@ -73,9 +73,9 @@ static int imx_sata_init(struct device *dev, void __iomem *addr) ret = PTR_ERR(sata_ref_clk); goto release_sata_clk; } - ret = clk_enable(sata_ref_clk); + ret = clk_prepare_enable(sata_ref_clk); if (ret) { - dev_err(dev, "can't enable sata ref clock.\n"); + dev_err(dev, "can't prepare/enable sata ref clock.\n"); goto put_sata_ref_clk; } @@ -104,11 +104,11 @@ static int imx_sata_init(struct device *dev, void __iomem *addr) return 0; release_sata_ref_clk: - clk_disable(sata_ref_clk); + clk_disable_unprepare(sata_ref_clk); put_sata_ref_clk: clk_put(sata_ref_clk); release_sata_clk: - clk_disable(sata_clk); + clk_disable_unprepare(sata_clk); put_sata_clk: clk_put(sata_clk); @@ -117,10 +117,10 @@ put_sata_clk: static void imx_sata_exit(struct device *dev) { - clk_disable(sata_ref_clk); + clk_disable_unprepare(sata_ref_clk); clk_put(sata_ref_clk); - clk_disable(sata_clk); + clk_disable_unprepare(sata_clk); clk_put(sata_clk); } diff --git a/arch/arm/plat-mxc/epit.c b/arch/arm/plat-mxc/epit.c index d3467f818c3..9129c9e7d53 100644 --- a/arch/arm/plat-mxc/epit.c +++ b/arch/arm/plat-mxc/epit.c @@ -203,7 +203,7 @@ static int __init epit_clockevent_init(struct clk *timer_clk) void __init epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq) { - clk_enable(timer_clk); + clk_prepare_enable(timer_clk); timer_base = base; diff --git a/arch/arm/plat-mxc/include/mach/board-mx31ads.h b/arch/arm/plat-mxc/include/mach/board-mx31ads.h deleted file mode 100644 index 94b60dd4713..00000000000 --- a/arch/arm/plat-mxc/include/mach/board-mx31ads.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MXC_BOARD_MX31ADS_H__ -#define __ASM_ARCH_MXC_BOARD_MX31ADS_H__ - -#include <mach/hardware.h> - -/* - * These symbols are used by drivers/net/cs89x0.c. - * This is ugly as hell, but we have to provide them until - * someone fixed the driver. - */ - -/* Base address of PBC controller */ -#define PBC_BASE_ADDRESS MX31_CS4_BASE_ADDR_VIRT -/* Offsets for the PBC Controller register */ - -/* Ethernet Controller IO base address */ -#define PBC_CS8900A_IOBASE 0x020000 - -#define MXC_EXP_IO_BASE (MXC_BOARD_IRQ_START) - -#define EXPIO_INT_ENET_INT (MXC_EXP_IO_BASE + 8) - -#endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/system.h b/arch/arm/plat-mxc/include/mach/system.h deleted file mode 100644 index 13ad0df2e86..00000000000 --- a/arch/arm/plat-mxc/include/mach/system.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * Copyright (C) 1999 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * Copyright 2004-2008 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __ASM_ARCH_MXC_SYSTEM_H__ -#define __ASM_ARCH_MXC_SYSTEM_H__ - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -#endif /* __ASM_ARCH_MXC_SYSTEM_H__ */ diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c index e032717f7d0..c0cab2270dd 100644 --- a/arch/arm/plat-mxc/pwm.c +++ b/arch/arm/plat-mxc/pwm.c @@ -132,7 +132,7 @@ int pwm_enable(struct pwm_device *pwm) int rc = 0; if (!pwm->clk_enabled) { - rc = clk_enable(pwm->clk); + rc = clk_prepare_enable(pwm->clk); if (!rc) pwm->clk_enabled = 1; } @@ -145,7 +145,7 @@ void pwm_disable(struct pwm_device *pwm) writel(0, pwm->mmio_base + MX3_PWMCR); if (pwm->clk_enabled) { - clk_disable(pwm->clk); + clk_disable_unprepare(pwm->clk); pwm->clk_enabled = 0; } } diff --git a/arch/arm/plat-mxc/system.c b/arch/arm/plat-mxc/system.c index 3599bf2cfd4..f30dcacbbd0 100644 --- a/arch/arm/plat-mxc/system.c +++ b/arch/arm/plat-mxc/system.c @@ -48,7 +48,7 @@ void mxc_restart(char mode, const char *cmd) clk = clk_get_sys("imx2-wdt.0", NULL); if (!IS_ERR(clk)) - clk_enable(clk); + clk_prepare_enable(clk); wcr_enable = (1 << 2); } diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c index 1c96cdb4c35..7daf7c9a413 100644 --- a/arch/arm/plat-mxc/time.c +++ b/arch/arm/plat-mxc/time.c @@ -283,7 +283,7 @@ void __init mxc_timer_init(struct clk *timer_clk, void __iomem *base, int irq) { uint32_t tctl_val; - clk_enable(timer_clk); + clk_prepare_enable(timer_clk); timer_base = base; diff --git a/arch/arm/plat-omap/include/plat/omap-secure.h b/arch/arm/plat-omap/include/plat/omap-secure.h index 64f9d1c7f1b..3047ff923a6 100644 --- a/arch/arm/plat-omap/include/plat/omap-secure.h +++ b/arch/arm/plat-omap/include/plat/omap-secure.h @@ -3,7 +3,7 @@ #include <linux/types.h> -#ifdef CONFIG_ARCH_OMAP2PLUS +#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) extern int omap_secure_ram_reserve_memblock(void); #else static inline void omap_secure_ram_reserve_memblock(void) diff --git a/arch/arm/plat-omap/include/plat/system.h b/arch/arm/plat-omap/include/plat/system.h deleted file mode 100644 index 8e5ebd74b12..00000000000 --- a/arch/arm/plat-omap/include/plat/system.h +++ /dev/null @@ -1,15 +0,0 @@ -/* - * Copied from arch/arm/mach-sa1100/include/mach/system.h - * Copyright (c) 1999 Nicolas Pitre <nico@fluxnic.net> - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -#include <asm/proc-fns.h> - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c index e5a2fde29b1..089899a7db7 100644 --- a/arch/arm/plat-orion/common.c +++ b/arch/arm/plat-orion/common.c @@ -789,10 +789,7 @@ void __init orion_xor1_init(unsigned long mapbase_low, /***************************************************************************** * EHCI ****************************************************************************/ -static struct orion_ehci_data orion_ehci_data = { - .phy_version = EHCI_PHY_NA, -}; - +static struct orion_ehci_data orion_ehci_data; static u64 ehci_dmamask = DMA_BIT_MASK(32); @@ -812,8 +809,10 @@ static struct platform_device orion_ehci = { }; void __init orion_ehci_init(unsigned long mapbase, - unsigned long irq) + unsigned long irq, + enum orion_ehci_phy_ver phy_version) { + orion_ehci_data.phy_version = phy_version; fill_resources(&orion_ehci, orion_ehci_resources, mapbase, SZ_4K - 1, irq); diff --git a/arch/arm/plat-orion/include/plat/common.h b/arch/arm/plat-orion/include/plat/common.h index 0fe08d77e83..a7fa005a5a0 100644 --- a/arch/arm/plat-orion/include/plat/common.h +++ b/arch/arm/plat-orion/include/plat/common.h @@ -89,7 +89,8 @@ void __init orion_xor1_init(unsigned long mapbase_low, unsigned long irq_1); void __init orion_ehci_init(unsigned long mapbase, - unsigned long irq); + unsigned long irq, + enum orion_ehci_phy_ver phy_version); void __init orion_ehci_1_init(unsigned long mapbase, unsigned long irq); diff --git a/arch/arm/plat-orion/mpp.c b/arch/arm/plat-orion/mpp.c index 91553432711..3b1e17bd3d1 100644 --- a/arch/arm/plat-orion/mpp.c +++ b/arch/arm/plat-orion/mpp.c @@ -64,8 +64,7 @@ void __init orion_mpp_conf(unsigned int *mpp_list, unsigned int variant_mask, gpio_mode |= GPIO_INPUT_OK; if (*mpp_list & MPP_OUTPUT_MASK) gpio_mode |= GPIO_OUTPUT_OK; - if (sel != 0) - gpio_mode = 0; + orion_gpio_set_valid(num, gpio_mode); } diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c index 21f1fda8b66..32a09931350 100644 --- a/arch/arm/plat-s3c24xx/cpu.c +++ b/arch/arm/plat-s3c24xx/cpu.c @@ -32,6 +32,7 @@ #include <linux/io.h> #include <mach/hardware.h> +#include <mach/regs-clock.h> #include <asm/irq.h> #include <asm/cacheflush.h> @@ -190,8 +191,34 @@ static unsigned long s3c24xx_read_idcode_v4(void) return __raw_readl(S3C2410_GSTATUS1); } +static void s3c24xx_default_idle(void) +{ + unsigned long tmp; + int i; + + /* idle the system by using the idle mode which will wait for an + * interrupt to happen before restarting the system. + */ + + /* Warning: going into idle state upsets jtag scanning */ + + __raw_writel(__raw_readl(S3C2410_CLKCON) | S3C2410_CLKCON_IDLE, + S3C2410_CLKCON); + + /* the samsung port seems to do a loop and then unset idle.. */ + for (i = 0; i < 50; i++) + tmp += __raw_readl(S3C2410_CLKCON); /* ensure loop not optimised out */ + + /* this bit is not cleared on re-start... */ + + __raw_writel(__raw_readl(S3C2410_CLKCON) & ~S3C2410_CLKCON_IDLE, + S3C2410_CLKCON); +} + void __init s3c24xx_init_io(struct map_desc *mach_desc, int size) { + arm_pm_idle = s3c24xx_default_idle; + /* initialise the io descriptors we need for initialisation */ iotable_init(mach_desc, size); iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc)); diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index 32a6e394db2..f10768e988d 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -468,8 +468,10 @@ void __init s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *pd) { struct s3c2410_platform_i2c *npd; - if (!pd) + if (!pd) { pd = &default_i2c_data; + pd->bus_num = 0; + } npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c), &s3c_device_i2c0); diff --git a/arch/arm/plat-samsung/include/plat/regs-rtc.h b/arch/arm/plat-samsung/include/plat/regs-rtc.h index 30b7cc14cef..0f8263e93ee 100644 --- a/arch/arm/plat-samsung/include/plat/regs-rtc.h +++ b/arch/arm/plat-samsung/include/plat/regs-rtc.h @@ -18,51 +18,54 @@ #define S3C2410_INTP_ALM (1 << 1) #define S3C2410_INTP_TIC (1 << 0) -#define S3C2410_RTCCON S3C2410_RTCREG(0x40) -#define S3C2410_RTCCON_RTCEN (1<<0) -#define S3C2410_RTCCON_CLKSEL (1<<1) -#define S3C2410_RTCCON_CNTSEL (1<<2) -#define S3C2410_RTCCON_CLKRST (1<<3) -#define S3C64XX_RTCCON_TICEN (1<<8) +#define S3C2410_RTCCON S3C2410_RTCREG(0x40) +#define S3C2410_RTCCON_RTCEN (1 << 0) +#define S3C2410_RTCCON_CNTSEL (1 << 2) +#define S3C2410_RTCCON_CLKRST (1 << 3) +#define S3C2443_RTCCON_TICSEL (1 << 4) +#define S3C64XX_RTCCON_TICEN (1 << 8) -#define S3C64XX_RTCCON_TICMSK (0xF<<7) -#define S3C64XX_RTCCON_TICSHT (7) +#define S3C2410_TICNT S3C2410_RTCREG(0x44) +#define S3C2410_TICNT_ENABLE (1 << 7) -#define S3C2410_TICNT S3C2410_RTCREG(0x44) -#define S3C2410_TICNT_ENABLE (1<<7) +/* S3C2443: tick count is 15 bit wide + * TICNT[6:0] contains upper 7 bits + * TICNT1[7:0] contains lower 8 bits + */ +#define S3C2443_TICNT_PART(x) ((x & 0x7f00) >> 8) +#define S3C2443_TICNT1 S3C2410_RTCREG(0x4C) +#define S3C2443_TICNT1_PART(x) (x & 0xff) -#define S3C2410_RTCALM S3C2410_RTCREG(0x50) -#define S3C2410_RTCALM_ALMEN (1<<6) -#define S3C2410_RTCALM_YEAREN (1<<5) -#define S3C2410_RTCALM_MONEN (1<<4) -#define S3C2410_RTCALM_DAYEN (1<<3) -#define S3C2410_RTCALM_HOUREN (1<<2) -#define S3C2410_RTCALM_MINEN (1<<1) -#define S3C2410_RTCALM_SECEN (1<<0) +/* S3C2416: tick count is 32 bit wide + * TICNT[6:0] contains bits [14:8] + * TICNT1[7:0] contains lower 8 bits + * TICNT2[16:0] contains upper 17 bits + */ +#define S3C2416_TICNT2 S3C2410_RTCREG(0x48) +#define S3C2416_TICNT2_PART(x) ((x & 0xffff8000) >> 15) -#define S3C2410_RTCALM_ALL \ - S3C2410_RTCALM_ALMEN | S3C2410_RTCALM_YEAREN | S3C2410_RTCALM_MONEN |\ - S3C2410_RTCALM_DAYEN | S3C2410_RTCALM_HOUREN | S3C2410_RTCALM_MINEN |\ - S3C2410_RTCALM_SECEN +#define S3C2410_RTCALM S3C2410_RTCREG(0x50) +#define S3C2410_RTCALM_ALMEN (1 << 6) +#define S3C2410_RTCALM_YEAREN (1 << 5) +#define S3C2410_RTCALM_MONEN (1 << 4) +#define S3C2410_RTCALM_DAYEN (1 << 3) +#define S3C2410_RTCALM_HOUREN (1 << 2) +#define S3C2410_RTCALM_MINEN (1 << 1) +#define S3C2410_RTCALM_SECEN (1 << 0) +#define S3C2410_ALMSEC S3C2410_RTCREG(0x54) +#define S3C2410_ALMMIN S3C2410_RTCREG(0x58) +#define S3C2410_ALMHOUR S3C2410_RTCREG(0x5c) -#define S3C2410_ALMSEC S3C2410_RTCREG(0x54) -#define S3C2410_ALMMIN S3C2410_RTCREG(0x58) -#define S3C2410_ALMHOUR S3C2410_RTCREG(0x5c) - -#define S3C2410_ALMDATE S3C2410_RTCREG(0x60) -#define S3C2410_ALMMON S3C2410_RTCREG(0x64) -#define S3C2410_ALMYEAR S3C2410_RTCREG(0x68) - -#define S3C2410_RTCRST S3C2410_RTCREG(0x6c) - -#define S3C2410_RTCSEC S3C2410_RTCREG(0x70) -#define S3C2410_RTCMIN S3C2410_RTCREG(0x74) -#define S3C2410_RTCHOUR S3C2410_RTCREG(0x78) -#define S3C2410_RTCDATE S3C2410_RTCREG(0x7c) -#define S3C2410_RTCDAY S3C2410_RTCREG(0x80) -#define S3C2410_RTCMON S3C2410_RTCREG(0x84) -#define S3C2410_RTCYEAR S3C2410_RTCREG(0x88) +#define S3C2410_ALMDATE S3C2410_RTCREG(0x60) +#define S3C2410_ALMMON S3C2410_RTCREG(0x64) +#define S3C2410_ALMYEAR S3C2410_RTCREG(0x68) +#define S3C2410_RTCSEC S3C2410_RTCREG(0x70) +#define S3C2410_RTCMIN S3C2410_RTCREG(0x74) +#define S3C2410_RTCHOUR S3C2410_RTCREG(0x78) +#define S3C2410_RTCDATE S3C2410_RTCREG(0x7c) +#define S3C2410_RTCMON S3C2410_RTCREG(0x84) +#define S3C2410_RTCYEAR S3C2410_RTCREG(0x88) #endif /* __ASM_ARCH_REGS_RTC_H */ diff --git a/arch/arm/plat-samsung/include/plat/rtc-core.h b/arch/arm/plat-samsung/include/plat/rtc-core.h new file mode 100644 index 00000000000..21d8594d37c --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/rtc-core.h @@ -0,0 +1,27 @@ +/* linux/arch/arm/plat-samsung/include/plat/rtc-core.h + * + * Copyright (c) 2011 Heiko Stuebner <heiko@sntech.de> + * + * Samsung RTC Controller core functions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_PLAT_RTC_CORE_H +#define __ASM_PLAT_RTC_CORE_H __FILE__ + +/* These functions are only for use with the core support code, such as + * the cpu specific initialisation code + */ + +/* re-define device name depending on support. */ +static inline void s3c_rtc_setname(char *name) +{ +#if defined(CONFIG_SAMSUNG_DEV_RTC) || defined(CONFIG_PLAT_S3C24XX) + s3c_device_rtc.name = name; +#endif +} + +#endif /* __ASM_PLAT_RTC_CORE_H */ diff --git a/arch/arm/plat-spear/include/plat/system.h b/arch/arm/plat-spear/include/plat/system.h deleted file mode 100644 index 86c6f83b44c..00000000000 --- a/arch/arm/plat-spear/include/plat/system.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * arch/arm/plat-spear/include/plat/system.h - * - * SPEAr platform specific architecture functions - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __PLAT_SYSTEM_H -#define __PLAT_SYSTEM_H - -static inline void arch_idle(void) -{ - /* - * This should do all the clock switching - * and wait for interrupt tricks - */ - cpu_do_idle(); -} - -#endif /* __PLAT_SYSTEM_H */ diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig index 197e96f7040..3dea7231f63 100644 --- a/arch/avr32/Kconfig +++ b/arch/avr32/Kconfig @@ -8,6 +8,7 @@ config AVR32 select HAVE_KPROBES select HAVE_GENERIC_HARDIRQS select GENERIC_IRQ_PROBE + select GENERIC_ATOMIC64 select HARDIRQS_SW_RESEND select GENERIC_IRQ_SHOW select ARCH_HAVE_NMI_SAFE_CMPXCHG diff --git a/arch/avr32/mach-at32ap/include/mach/cpu.h b/arch/avr32/mach-at32ap/include/mach/cpu.h index 8181293115e..16a24b14146 100644 --- a/arch/avr32/mach-at32ap/include/mach/cpu.h +++ b/arch/avr32/mach-at32ap/include/mach/cpu.h @@ -30,9 +30,6 @@ #define cpu_is_at91sam9261() (0) #define cpu_is_at91sam9263() (0) #define cpu_is_at91sam9rl() (0) -#define cpu_is_at91cap9() (0) -#define cpu_is_at91cap9_revB() (0) -#define cpu_is_at91cap9_revC() (0) #define cpu_is_at91sam9g10() (0) #define cpu_is_at91sam9g20() (0) #define cpu_is_at91sam9g45() (0) diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c index d4fc1a97177..604cd9dd133 100644 --- a/arch/microblaze/kernel/setup.c +++ b/arch/microblaze/kernel/setup.c @@ -26,7 +26,6 @@ #include <linux/cache.h> #include <linux/of_platform.h> #include <linux/dma-mapping.h> -#include <linux/cpu.h> #include <asm/cacheflush.h> #include <asm/entry.h> #include <asm/cpuinfo.h> @@ -227,23 +226,5 @@ static int __init setup_bus_notifier(void) return 0; } -arch_initcall(setup_bus_notifier); - -static DEFINE_PER_CPU(struct cpu, cpu_devices); - -static int __init topology_init(void) -{ - int i, ret; - - for_each_present_cpu(i) { - struct cpu *c = &per_cpu(cpu_devices, i); - ret = register_cpu(c, i); - if (ret) - printk(KERN_WARNING "topology_init: register_cpu %d " - "failed (%d)\n", i, ret); - } - - return 0; -} -subsys_initcall(topology_init); +arch_initcall(setup_bus_notifier); diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index c4c1312473f..5ab6e89603c 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -2356,6 +2356,7 @@ config PCI depends on HW_HAS_PCI select PCI_DOMAINS select GENERIC_PCI_IOMAP + select NO_GENERIC_PCI_IOPORT_MAP help Find out whether you have a PCI motherboard. PCI is the name of a bus system, i.e. the way the CPU talks to the other stuff inside diff --git a/arch/mips/lib/iomap-pci.c b/arch/mips/lib/iomap-pci.c index 2635b1a9633..fd35daa4531 100644 --- a/arch/mips/lib/iomap-pci.c +++ b/arch/mips/lib/iomap-pci.c @@ -10,8 +10,8 @@ #include <linux/module.h> #include <asm/io.h> -static void __iomem *ioport_map_pci(struct pci_dev *dev, - unsigned long port, unsigned int nr) +void __iomem *__pci_ioport_map(struct pci_dev *dev, + unsigned long port, unsigned int nr) { struct pci_controller *ctrl = dev->bus->sysdata; unsigned long base = ctrl->io_map_base; diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig index 2156e077859..1acf6502677 100644 --- a/arch/powerpc/configs/ppc64_defconfig +++ b/arch/powerpc/configs/ppc64_defconfig @@ -24,10 +24,6 @@ CONFIG_PPC_SPLPAR=y CONFIG_SCANLOG=m CONFIG_PPC_SMLPAR=y CONFIG_DTL=y -CONFIG_PPC_ISERIES=y -CONFIG_VIODASD=y -CONFIG_VIOCD=m -CONFIG_VIOTAPE=m CONFIG_PPC_MAPLE=y CONFIG_PPC_PASEMI=y CONFIG_PPC_PASEMI_IOMMU=y @@ -259,7 +255,6 @@ CONFIG_PASEMI_MAC=y CONFIG_MLX4_EN=m CONFIG_QLGE=m CONFIG_BE2NET=m -CONFIG_ISERIES_VETH=m CONFIG_PPP=m CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m diff --git a/arch/powerpc/include/asm/ppc-pci.h b/arch/powerpc/include/asm/ppc-pci.h index 43268f15004..6d422979eba 100644 --- a/arch/powerpc/include/asm/ppc-pci.h +++ b/arch/powerpc/include/asm/ppc-pci.h @@ -142,6 +142,11 @@ static inline const char *eeh_pci_name(struct pci_dev *pdev) return pdev ? pci_name(pdev) : "<null>"; } +static inline const char *eeh_driver_name(struct pci_dev *pdev) +{ + return (pdev && pdev->driver) ? pdev->driver->name : "<null>"; +} + #endif /* CONFIG_EEH */ #else /* CONFIG_PCI */ diff --git a/arch/powerpc/include/asm/ptrace.h b/arch/powerpc/include/asm/ptrace.h index 78a205162fd..84cc7840cd1 100644 --- a/arch/powerpc/include/asm/ptrace.h +++ b/arch/powerpc/include/asm/ptrace.h @@ -83,8 +83,18 @@ struct pt_regs { #ifndef __ASSEMBLY__ -#define instruction_pointer(regs) ((regs)->nip) -#define user_stack_pointer(regs) ((regs)->gpr[1]) +#define GET_IP(regs) ((regs)->nip) +#define GET_USP(regs) ((regs)->gpr[1]) +#define GET_FP(regs) (0) +#define SET_FP(regs, val) + +#ifdef CONFIG_SMP +extern unsigned long profile_pc(struct pt_regs *regs); +#define profile_pc profile_pc +#endif + +#include <asm-generic/ptrace.h> + #define kernel_stack_pointer(regs) ((regs)->gpr[1]) static inline int is_syscall_success(struct pt_regs *regs) { @@ -99,12 +109,6 @@ static inline long regs_return_value(struct pt_regs *regs) return -regs->gpr[3]; } -#ifdef CONFIG_SMP -extern unsigned long profile_pc(struct pt_regs *regs); -#else -#define profile_pc(regs) instruction_pointer(regs) -#endif - #ifdef __powerpc64__ #define user_mode(regs) ((((regs)->msr) >> MSR_PR_LG) & 0x1) #else diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S index d4be7bb3dbd..3844ca7c509 100644 --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -775,7 +775,7 @@ program_check_common: EXCEPTION_PROLOG_COMMON(0x700, PACA_EXGEN) bl .save_nvgprs addi r3,r1,STACK_FRAME_OVERHEAD - ENABLE_INTS + DISABLE_INTS bl .program_check_exception b .ret_from_except diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 701d4aceb4f..01e2877e8e0 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -118,10 +118,14 @@ static inline notrace void set_soft_enabled(unsigned long enable) static inline notrace void decrementer_check_overflow(void) { u64 now = get_tb_or_rtc(); - u64 *next_tb = &__get_cpu_var(decrementers_next_tb); + u64 *next_tb; + + preempt_disable(); + next_tb = &__get_cpu_var(decrementers_next_tb); if (now >= *next_tb) set_dec(1); + preempt_enable(); } notrace void arch_local_irq_restore(unsigned long en) diff --git a/arch/powerpc/kernel/perf_event.c b/arch/powerpc/kernel/perf_event.c index 10a140f82cb..64483fde95c 100644 --- a/arch/powerpc/kernel/perf_event.c +++ b/arch/powerpc/kernel/perf_event.c @@ -865,6 +865,7 @@ static void power_pmu_start(struct perf_event *event, int ef_flags) { unsigned long flags; s64 left; + unsigned long val; if (!event->hw.idx || !event->hw.sample_period) return; @@ -880,7 +881,12 @@ static void power_pmu_start(struct perf_event *event, int ef_flags) event->hw.state = 0; left = local64_read(&event->hw.period_left); - write_pmc(event->hw.idx, left); + + val = 0; + if (left < 0x80000000L) + val = 0x80000000L - left; + + write_pmc(event->hw.idx, val); perf_event_update_userpage(event); perf_pmu_enable(event->pmu); diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index ebe5766781a..d817ab01848 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -566,12 +566,12 @@ static void show_instructions(struct pt_regs *regs) */ if (!__kernel_text_address(pc) || __get_user(instr, (unsigned int __user *)pc)) { - printk("XXXXXXXX "); + printk(KERN_CONT "XXXXXXXX "); } else { if (regs->nip == pc) - printk("<%08x> ", instr); + printk(KERN_CONT "<%08x> ", instr); else - printk("%08x ", instr); + printk(KERN_CONT "%08x ", instr); } pc += sizeof(int); diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c index 517b1d8f455..9f843cdfee9 100644 --- a/arch/powerpc/kernel/rtas.c +++ b/arch/powerpc/kernel/rtas.c @@ -716,7 +716,6 @@ static int __rtas_suspend_last_cpu(struct rtas_suspend_me_data *data, int wake_w int cpu; slb_set_size(SLB_MIN_SIZE); - stop_topology_update(); printk(KERN_DEBUG "calling ibm,suspend-me on cpu %i\n", smp_processor_id()); while (rc == H_MULTI_THREADS_ACTIVE && !atomic_read(&data->done) && @@ -732,7 +731,6 @@ static int __rtas_suspend_last_cpu(struct rtas_suspend_me_data *data, int wake_w rc = atomic_read(&data->error); atomic_set(&data->error, rc); - start_topology_update(); pSeries_coalesce_init(); if (wake_when_done) { @@ -846,6 +844,7 @@ int rtas_ibm_suspend_me(struct rtas_args *args) atomic_set(&data.error, 0); data.token = rtas_token("ibm,suspend-me"); data.complete = &done; + stop_topology_update(); /* Call function on all CPUs. One of us will make the * rtas call @@ -858,6 +857,8 @@ int rtas_ibm_suspend_me(struct rtas_args *args) if (atomic_read(&data.error) != 0) printk(KERN_ERR "Error doing global join\n"); + start_topology_update(); + return atomic_read(&data.error); } #else /* CONFIG_PPC_PSERIES */ diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c index a70bc1e385e..f92b9ef7340 100644 --- a/arch/powerpc/platforms/powernv/pci.c +++ b/arch/powerpc/platforms/powernv/pci.c @@ -52,32 +52,38 @@ static int pnv_msi_check_device(struct pci_dev* pdev, int nvec, int type) static unsigned int pnv_get_one_msi(struct pnv_phb *phb) { - unsigned int id; + unsigned long flags; + unsigned int id, rc; + + spin_lock_irqsave(&phb->lock, flags); - spin_lock(&phb->lock); id = find_next_zero_bit(phb->msi_map, phb->msi_count, phb->msi_next); if (id >= phb->msi_count && phb->msi_next) id = find_next_zero_bit(phb->msi_map, phb->msi_count, 0); if (id >= phb->msi_count) { - spin_unlock(&phb->lock); - return 0; + rc = 0; + goto out; } __set_bit(id, phb->msi_map); - spin_unlock(&phb->lock); - return id + phb->msi_base; + rc = id + phb->msi_base; +out: + spin_unlock_irqrestore(&phb->lock, flags); + return rc; } static void pnv_put_msi(struct pnv_phb *phb, unsigned int hwirq) { + unsigned long flags; unsigned int id; if (WARN_ON(hwirq < phb->msi_base || hwirq >= (phb->msi_base + phb->msi_count))) return; id = hwirq - phb->msi_base; - spin_lock(&phb->lock); + + spin_lock_irqsave(&phb->lock, flags); __clear_bit(id, phb->msi_map); - spin_unlock(&phb->lock); + spin_unlock_irqrestore(&phb->lock, flags); } static int pnv_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type) diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c index 565869022e3..c0b40af4ce4 100644 --- a/arch/powerpc/platforms/pseries/eeh.c +++ b/arch/powerpc/platforms/pseries/eeh.c @@ -551,9 +551,9 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) printk (KERN_ERR "EEH: %d reads ignored for recovering device at " "location=%s driver=%s pci addr=%s\n", pdn->eeh_check_count, location, - dev->driver->name, eeh_pci_name(dev)); + eeh_driver_name(dev), eeh_pci_name(dev)); printk (KERN_ERR "EEH: Might be infinite loop in %s driver\n", - dev->driver->name); + eeh_driver_name(dev)); dump_stack(); } goto dn_unlock; diff --git a/arch/powerpc/platforms/pseries/suspend.c b/arch/powerpc/platforms/pseries/suspend.c index b84a8b2238d..47226e04126 100644 --- a/arch/powerpc/platforms/pseries/suspend.c +++ b/arch/powerpc/platforms/pseries/suspend.c @@ -24,6 +24,7 @@ #include <asm/machdep.h> #include <asm/mmu.h> #include <asm/rtas.h> +#include <asm/topology.h> static u64 stream_id; static struct device suspend_dev; @@ -138,8 +139,11 @@ static ssize_t store_hibernate(struct device *dev, ssleep(1); } while (rc == -EAGAIN); - if (!rc) + if (!rc) { + stop_topology_update(); rc = pm_suspend(PM_SUSPEND_MEM); + start_topology_update(); + } stream_id = 0; diff --git a/arch/powerpc/platforms/wsp/ics.c b/arch/powerpc/platforms/wsp/ics.c index 57687439254..97fe82ee863 100644 --- a/arch/powerpc/platforms/wsp/ics.c +++ b/arch/powerpc/platforms/wsp/ics.c @@ -346,7 +346,7 @@ static int wsp_chip_set_affinity(struct irq_data *d, * For the moment only implement delivery to all cpus or one cpu. * Get current irq_server for the given irq */ - ret = cache_hwirq_map(ics, d->irq, cpumask); + ret = cache_hwirq_map(ics, hw_irq, cpumask); if (ret == -1) { char cpulist[128]; cpumask_scnprintf(cpulist, sizeof(cpulist), cpumask); diff --git a/arch/powerpc/platforms/wsp/wsp_pci.c b/arch/powerpc/platforms/wsp/wsp_pci.c index e0262cd0e2d..d24b3acf858 100644 --- a/arch/powerpc/platforms/wsp/wsp_pci.c +++ b/arch/powerpc/platforms/wsp/wsp_pci.c @@ -468,15 +468,15 @@ static void __init wsp_pcie_configure_hw(struct pci_controller *hose) #define DUMP_REG(x) \ pr_debug("%-30s : 0x%016llx\n", #x, in_be64(hose->cfg_data + x)) -#ifdef CONFIG_WSP_DD1_WORKAROUND_BAD_PCIE_CLASS - /* WSP DD1 has a bogus class code by default in the PCI-E - * root complex's built-in P2P bridge */ + /* + * Some WSP variants has a bogus class code by default in the PCI-E + * root complex's built-in P2P bridge + */ val = in_be64(hose->cfg_data + PCIE_REG_SYS_CFG1); pr_debug("PCI-E SYS_CFG1 : 0x%llx\n", val); out_be64(hose->cfg_data + PCIE_REG_SYS_CFG1, (val & ~PCIE_REG_SYS_CFG1_CLASS_CODE) | (PCI_CLASS_BRIDGE_PCI << 8)); pr_debug("PCI-E SYS_CFG1 : 0x%llx\n", in_be64(hose->cfg_data + PCIE_REG_SYS_CFG1)); -#endif /* CONFIG_WSP_DD1_WORKAROUND_BAD_PCIE_CLASS */ #ifdef CONFIG_WSP_DD1_WORKAROUND_DD1_TCE_BUGS /* XXX Disable TCE caching, it doesn't work on DD1 */ diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c index 30eb17ecad4..6073288fed2 100644 --- a/arch/powerpc/sysdev/fsl_pci.c +++ b/arch/powerpc/sysdev/fsl_pci.c @@ -385,26 +385,36 @@ static void __init setup_pci_cmd(struct pci_controller *hose) void fsl_pcibios_fixup_bus(struct pci_bus *bus) { struct pci_controller *hose = pci_bus_to_host(bus); - int i; - - if ((bus->parent == hose->bus) && - ((fsl_pcie_bus_fixup && - early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) || - (hose->indirect_type & PPC_INDIRECT_TYPE_NO_PCIE_LINK))) - { - for (i = 0; i < 4; ++i) { + int i, is_pcie = 0, no_link; + + /* The root complex bridge comes up with bogus resources, + * we copy the PHB ones in. + * + * With the current generic PCI code, the PHB bus no longer + * has bus->resource[0..4] set, so things are a bit more + * tricky. + */ + + if (fsl_pcie_bus_fixup) + is_pcie = early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP); + no_link = !!(hose->indirect_type & PPC_INDIRECT_TYPE_NO_PCIE_LINK); + + if (bus->parent == hose->bus && (is_pcie || no_link)) { + for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; ++i) { struct resource *res = bus->resource[i]; - struct resource *par = bus->parent->resource[i]; - if (res) { - res->start = 0; - res->end = 0; - res->flags = 0; - } - if (res && par) { - res->start = par->start; - res->end = par->end; - res->flags = par->flags; - } + struct resource *par; + + if (!res) + continue; + if (i == 0) + par = &hose->io_resource; + else if (i < 4) + par = &hose->mem_resources[i-1]; + else par = NULL; + + res->start = par ? par->start : 0; + res->end = par ? par->end : 0; + res->flags = par ? par->flags : 0; } } } diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 3c8db65c89e..713fb58ca50 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -859,6 +859,7 @@ config PCI depends on SYS_SUPPORTS_PCI select PCI_DOMAINS select GENERIC_PCI_IOMAP + select NO_GENERIC_PCI_IOPORT_MAP help Find out whether you have a PCI motherboard. PCI is the name of a bus system, i.e. the way the CPU talks to the other stuff inside diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c index 8f18dd090a6..1e7b0e2e764 100644 --- a/arch/sh/drivers/pci/pci.c +++ b/arch/sh/drivers/pci/pci.c @@ -356,8 +356,8 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, #ifndef CONFIG_GENERIC_IOMAP -static void __iomem *ioport_map_pci(struct pci_dev *dev, - unsigned long port, unsigned int nr) +void __iomem *__pci_ioport_map(struct pci_dev *dev, + unsigned long port, unsigned int nr) { struct pci_channel *chan = dev->sysdata; diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index 96657992a72..ca5580e4d81 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -33,6 +33,7 @@ config SPARC config SPARC32 def_bool !64BIT select GENERIC_ATOMIC64 + select CLZ_TAB config SPARC64 def_bool 64BIT diff --git a/arch/sparc/lib/divdi3.S b/arch/sparc/lib/divdi3.S index 681b3683da9..d74bc0925f2 100644 --- a/arch/sparc/lib/divdi3.S +++ b/arch/sparc/lib/divdi3.S @@ -17,23 +17,9 @@ along with GNU CC; see the file COPYING. If not, write to the Free Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ - .data - .align 8 - .globl __clz_tab -__clz_tab: - .byte 0,1,2,2,3,3,3,3,4,4,4,4,4,4,4,4,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5 - .byte 6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6 - .byte 7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7 - .byte 7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7 - .byte 8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8 - .byte 8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8 - .byte 8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8 - .byte 8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8 - .size __clz_tab,256 - .global .udiv - .text .align 4 + .global .udiv .globl __divdi3 __divdi3: save %sp,-104,%sp diff --git a/arch/x86/include/asm/cmpxchg.h b/arch/x86/include/asm/cmpxchg.h index 0c9fa2745f1..b3b73326290 100644 --- a/arch/x86/include/asm/cmpxchg.h +++ b/arch/x86/include/asm/cmpxchg.h @@ -145,13 +145,13 @@ extern void __add_wrong_size(void) #ifdef __HAVE_ARCH_CMPXCHG #define cmpxchg(ptr, old, new) \ - __cmpxchg((ptr), (old), (new), sizeof(*ptr)) + __cmpxchg(ptr, old, new, sizeof(*(ptr))) #define sync_cmpxchg(ptr, old, new) \ - __sync_cmpxchg((ptr), (old), (new), sizeof(*ptr)) + __sync_cmpxchg(ptr, old, new, sizeof(*(ptr))) #define cmpxchg_local(ptr, old, new) \ - __cmpxchg_local((ptr), (old), (new), sizeof(*ptr)) + __cmpxchg_local(ptr, old, new, sizeof(*(ptr))) #endif /* diff --git a/arch/x86/include/asm/i387.h b/arch/x86/include/asm/i387.h index 6919e936345..a850b4d8d14 100644 --- a/arch/x86/include/asm/i387.h +++ b/arch/x86/include/asm/i387.h @@ -29,8 +29,8 @@ extern unsigned int sig_xstate_size; extern void fpu_init(void); extern void mxcsr_feature_mask_init(void); extern int init_fpu(struct task_struct *child); -extern asmlinkage void math_state_restore(void); -extern void __math_state_restore(void); +extern void __math_state_restore(struct task_struct *); +extern void math_state_restore(void); extern int dump_fpu(struct pt_regs *, struct user_i387_struct *); extern user_regset_active_fn fpregs_active, xfpregs_active; @@ -212,19 +212,11 @@ static inline void fpu_fxsave(struct fpu *fpu) #endif /* CONFIG_X86_64 */ -/* We need a safe address that is cheap to find and that is already - in L1 during context switch. The best choices are unfortunately - different for UP and SMP */ -#ifdef CONFIG_SMP -#define safe_address (__per_cpu_offset[0]) -#else -#define safe_address (__get_cpu_var(kernel_cpustat).cpustat[CPUTIME_USER]) -#endif - /* - * These must be called with preempt disabled + * These must be called with preempt disabled. Returns + * 'true' if the FPU state is still intact. */ -static inline void fpu_save_init(struct fpu *fpu) +static inline int fpu_save_init(struct fpu *fpu) { if (use_xsave()) { fpu_xsave(fpu); @@ -233,33 +225,33 @@ static inline void fpu_save_init(struct fpu *fpu) * xsave header may indicate the init state of the FP. */ if (!(fpu->state->xsave.xsave_hdr.xstate_bv & XSTATE_FP)) - return; + return 1; } else if (use_fxsr()) { fpu_fxsave(fpu); } else { asm volatile("fnsave %[fx]; fwait" : [fx] "=m" (fpu->state->fsave)); - return; + return 0; } - if (unlikely(fpu->state->fxsave.swd & X87_FSW_ES)) + /* + * If exceptions are pending, we need to clear them so + * that we don't randomly get exceptions later. + * + * FIXME! Is this perhaps only true for the old-style + * irq13 case? Maybe we could leave the x87 state + * intact otherwise? + */ + if (unlikely(fpu->state->fxsave.swd & X87_FSW_ES)) { asm volatile("fnclex"); - - /* AMD K7/K8 CPUs don't save/restore FDP/FIP/FOP unless an exception - is pending. Clear the x87 state here by setting it to fixed - values. safe_address is a random variable that should be in L1 */ - alternative_input( - ASM_NOP8 ASM_NOP2, - "emms\n\t" /* clear stack tags */ - "fildl %P[addr]", /* set F?P to defined value */ - X86_FEATURE_FXSAVE_LEAK, - [addr] "m" (safe_address)); + return 0; + } + return 1; } -static inline void __save_init_fpu(struct task_struct *tsk) +static inline int __save_init_fpu(struct task_struct *tsk) { - fpu_save_init(&tsk->thread.fpu); - task_thread_info(tsk)->status &= ~TS_USEDFPU; + return fpu_save_init(&tsk->thread.fpu); } static inline int fpu_fxrstor_checking(struct fpu *fpu) @@ -281,39 +273,185 @@ static inline int restore_fpu_checking(struct task_struct *tsk) } /* - * Signal frame handlers... + * Software FPU state helpers. Careful: these need to + * be preemption protection *and* they need to be + * properly paired with the CR0.TS changes! */ -extern int save_i387_xstate(void __user *buf); -extern int restore_i387_xstate(void __user *buf); +static inline int __thread_has_fpu(struct task_struct *tsk) +{ + return tsk->thread.has_fpu; +} -static inline void __unlazy_fpu(struct task_struct *tsk) +/* Must be paired with an 'stts' after! */ +static inline void __thread_clear_has_fpu(struct task_struct *tsk) { - if (task_thread_info(tsk)->status & TS_USEDFPU) { - __save_init_fpu(tsk); - stts(); - } else - tsk->fpu_counter = 0; + tsk->thread.has_fpu = 0; +} + +/* Must be paired with a 'clts' before! */ +static inline void __thread_set_has_fpu(struct task_struct *tsk) +{ + tsk->thread.has_fpu = 1; } +/* + * Encapsulate the CR0.TS handling together with the + * software flag. + * + * These generally need preemption protection to work, + * do try to avoid using these on their own. + */ +static inline void __thread_fpu_end(struct task_struct *tsk) +{ + __thread_clear_has_fpu(tsk); + stts(); +} + +static inline void __thread_fpu_begin(struct task_struct *tsk) +{ + clts(); + __thread_set_has_fpu(tsk); +} + +/* + * FPU state switching for scheduling. + * + * This is a two-stage process: + * + * - switch_fpu_prepare() saves the old state and + * sets the new state of the CR0.TS bit. This is + * done within the context of the old process. + * + * - switch_fpu_finish() restores the new state as + * necessary. + */ +typedef struct { int preload; } fpu_switch_t; + +/* + * FIXME! We could do a totally lazy restore, but we need to + * add a per-cpu "this was the task that last touched the FPU + * on this CPU" variable, and the task needs to have a "I last + * touched the FPU on this CPU" and check them. + * + * We don't do that yet, so "fpu_lazy_restore()" always returns + * false, but some day.. + */ +#define fpu_lazy_restore(tsk) (0) +#define fpu_lazy_state_intact(tsk) do { } while (0) + +static inline fpu_switch_t switch_fpu_prepare(struct task_struct *old, struct task_struct *new) +{ + fpu_switch_t fpu; + + fpu.preload = tsk_used_math(new) && new->fpu_counter > 5; + if (__thread_has_fpu(old)) { + if (__save_init_fpu(old)) + fpu_lazy_state_intact(old); + __thread_clear_has_fpu(old); + old->fpu_counter++; + + /* Don't change CR0.TS if we just switch! */ + if (fpu.preload) { + __thread_set_has_fpu(new); + prefetch(new->thread.fpu.state); + } else + stts(); + } else { + old->fpu_counter = 0; + if (fpu.preload) { + if (fpu_lazy_restore(new)) + fpu.preload = 0; + else + prefetch(new->thread.fpu.state); + __thread_fpu_begin(new); + } + } + return fpu; +} + +/* + * By the time this gets called, we've already cleared CR0.TS and + * given the process the FPU if we are going to preload the FPU + * state - all we need to do is to conditionally restore the register + * state itself. + */ +static inline void switch_fpu_finish(struct task_struct *new, fpu_switch_t fpu) +{ + if (fpu.preload) + __math_state_restore(new); +} + +/* + * Signal frame handlers... + */ +extern int save_i387_xstate(void __user *buf); +extern int restore_i387_xstate(void __user *buf); + static inline void __clear_fpu(struct task_struct *tsk) { - if (task_thread_info(tsk)->status & TS_USEDFPU) { + if (__thread_has_fpu(tsk)) { /* Ignore delayed exceptions from user space */ asm volatile("1: fwait\n" "2:\n" _ASM_EXTABLE(1b, 2b)); - task_thread_info(tsk)->status &= ~TS_USEDFPU; - stts(); + __thread_fpu_end(tsk); } } +/* + * Were we in an interrupt that interrupted kernel mode? + * + * We can do a kernel_fpu_begin/end() pair *ONLY* if that + * pair does nothing at all: the thread must not have fpu (so + * that we don't try to save the FPU state), and TS must + * be set (so that the clts/stts pair does nothing that is + * visible in the interrupted kernel thread). + */ +static inline bool interrupted_kernel_fpu_idle(void) +{ + return !__thread_has_fpu(current) && + (read_cr0() & X86_CR0_TS); +} + +/* + * Were we in user mode (or vm86 mode) when we were + * interrupted? + * + * Doing kernel_fpu_begin/end() is ok if we are running + * in an interrupt context from user mode - we'll just + * save the FPU state as required. + */ +static inline bool interrupted_user_mode(void) +{ + struct pt_regs *regs = get_irq_regs(); + return regs && user_mode_vm(regs); +} + +/* + * Can we use the FPU in kernel mode with the + * whole "kernel_fpu_begin/end()" sequence? + * + * It's always ok in process context (ie "not interrupt") + * but it is sometimes ok even from an irq. + */ +static inline bool irq_fpu_usable(void) +{ + return !in_interrupt() || + interrupted_user_mode() || + interrupted_kernel_fpu_idle(); +} + static inline void kernel_fpu_begin(void) { - struct thread_info *me = current_thread_info(); + struct task_struct *me = current; + + WARN_ON_ONCE(!irq_fpu_usable()); preempt_disable(); - if (me->status & TS_USEDFPU) - __save_init_fpu(me->task); - else + if (__thread_has_fpu(me)) { + __save_init_fpu(me); + __thread_clear_has_fpu(me); + /* We do 'stts()' in kernel_fpu_end() */ + } else clts(); } @@ -323,14 +461,6 @@ static inline void kernel_fpu_end(void) preempt_enable(); } -static inline bool irq_fpu_usable(void) -{ - struct pt_regs *regs; - - return !in_interrupt() || !(regs = get_irq_regs()) || \ - user_mode(regs) || (read_cr0() & X86_CR0_TS); -} - /* * Some instructions like VIA's padlock instructions generate a spurious * DNA fault but don't modify SSE registers. And these instructions @@ -363,20 +493,64 @@ static inline void irq_ts_restore(int TS_state) } /* + * The question "does this thread have fpu access?" + * is slightly racy, since preemption could come in + * and revoke it immediately after the test. + * + * However, even in that very unlikely scenario, + * we can just assume we have FPU access - typically + * to save the FP state - we'll just take a #NM + * fault and get the FPU access back. + * + * The actual user_fpu_begin/end() functions + * need to be preemption-safe, though. + * + * NOTE! user_fpu_end() must be used only after you + * have saved the FP state, and user_fpu_begin() must + * be used only immediately before restoring it. + * These functions do not do any save/restore on + * their own. + */ +static inline int user_has_fpu(void) +{ + return __thread_has_fpu(current); +} + +static inline void user_fpu_end(void) +{ + preempt_disable(); + __thread_fpu_end(current); + preempt_enable(); +} + +static inline void user_fpu_begin(void) +{ + preempt_disable(); + if (!user_has_fpu()) + __thread_fpu_begin(current); + preempt_enable(); +} + +/* * These disable preemption on their own and are safe */ static inline void save_init_fpu(struct task_struct *tsk) { + WARN_ON_ONCE(!__thread_has_fpu(tsk)); preempt_disable(); __save_init_fpu(tsk); - stts(); + __thread_fpu_end(tsk); preempt_enable(); } static inline void unlazy_fpu(struct task_struct *tsk) { preempt_disable(); - __unlazy_fpu(tsk); + if (__thread_has_fpu(tsk)) { + __save_init_fpu(tsk); + __thread_fpu_end(tsk); + } else + tsk->fpu_counter = 0; preempt_enable(); } diff --git a/arch/x86/include/asm/kvm_emulate.h b/arch/x86/include/asm/kvm_emulate.h index ab4092e3214..7b9cfc4878a 100644 --- a/arch/x86/include/asm/kvm_emulate.h +++ b/arch/x86/include/asm/kvm_emulate.h @@ -190,6 +190,9 @@ struct x86_emulate_ops { int (*intercept)(struct x86_emulate_ctxt *ctxt, struct x86_instruction_info *info, enum x86_intercept_stage stage); + + bool (*get_cpuid)(struct x86_emulate_ctxt *ctxt, + u32 *eax, u32 *ebx, u32 *ecx, u32 *edx); }; typedef u32 __attribute__((vector_size(16))) sse128_t; @@ -298,6 +301,19 @@ struct x86_emulate_ctxt { #define X86EMUL_MODE_PROT (X86EMUL_MODE_PROT16|X86EMUL_MODE_PROT32| \ X86EMUL_MODE_PROT64) +/* CPUID vendors */ +#define X86EMUL_CPUID_VENDOR_AuthenticAMD_ebx 0x68747541 +#define X86EMUL_CPUID_VENDOR_AuthenticAMD_ecx 0x444d4163 +#define X86EMUL_CPUID_VENDOR_AuthenticAMD_edx 0x69746e65 + +#define X86EMUL_CPUID_VENDOR_AMDisbetterI_ebx 0x69444d41 +#define X86EMUL_CPUID_VENDOR_AMDisbetterI_ecx 0x21726574 +#define X86EMUL_CPUID_VENDOR_AMDisbetterI_edx 0x74656273 + +#define X86EMUL_CPUID_VENDOR_GenuineIntel_ebx 0x756e6547 +#define X86EMUL_CPUID_VENDOR_GenuineIntel_ecx 0x6c65746e +#define X86EMUL_CPUID_VENDOR_GenuineIntel_edx 0x49656e69 + enum x86_intercept_stage { X86_ICTP_NONE = 0, /* Allow zero-init to not match anything */ X86_ICPT_PRE_EXCEPT, diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h index aa9088c2693..f7c89e231c6 100644 --- a/arch/x86/include/asm/processor.h +++ b/arch/x86/include/asm/processor.h @@ -454,6 +454,7 @@ struct thread_struct { unsigned long trap_no; unsigned long error_code; /* floating point and extended processor state */ + unsigned long has_fpu; struct fpu fpu; #ifdef CONFIG_X86_32 /* Virtual 86 mode info */ diff --git a/arch/x86/include/asm/thread_info.h b/arch/x86/include/asm/thread_info.h index bc817cd8b44..cfd8144d552 100644 --- a/arch/x86/include/asm/thread_info.h +++ b/arch/x86/include/asm/thread_info.h @@ -247,8 +247,6 @@ static inline struct thread_info *current_thread_info(void) * ever touches our thread-synchronous status, so we don't * have to worry about atomic accesses. */ -#define TS_USEDFPU 0x0001 /* FPU was used by this task - this quantum (SMP) */ #define TS_COMPAT 0x0002 /* 32bit syscall active (64BIT)*/ #define TS_POLLING 0x0004 /* idle task polling need_resched, skip sending interrupt */ diff --git a/arch/x86/kernel/cpu/perf_event_intel_ds.c b/arch/x86/kernel/cpu/perf_event_intel_ds.c index 73da6b64f5b..d6bd49faa40 100644 --- a/arch/x86/kernel/cpu/perf_event_intel_ds.c +++ b/arch/x86/kernel/cpu/perf_event_intel_ds.c @@ -439,7 +439,6 @@ void intel_pmu_pebs_enable(struct perf_event *event) hwc->config &= ~ARCH_PERFMON_EVENTSEL_INT; cpuc->pebs_enabled |= 1ULL << hwc->idx; - WARN_ON_ONCE(cpuc->enabled); if (x86_pmu.intel_cap.pebs_trap && event->attr.precise_ip > 1) intel_pmu_lbr_enable(event); diff --git a/arch/x86/kernel/cpu/perf_event_intel_lbr.c b/arch/x86/kernel/cpu/perf_event_intel_lbr.c index 3fab3de3ce9..47a7e63bfe5 100644 --- a/arch/x86/kernel/cpu/perf_event_intel_lbr.c +++ b/arch/x86/kernel/cpu/perf_event_intel_lbr.c @@ -72,8 +72,6 @@ void intel_pmu_lbr_enable(struct perf_event *event) if (!x86_pmu.lbr_nr) return; - WARN_ON_ONCE(cpuc->enabled); - /* * Reset the LBR stack if we changed task context to * avoid data leaks. diff --git a/arch/x86/kernel/dumpstack.c b/arch/x86/kernel/dumpstack.c index 1aae78f775f..4025fe4f928 100644 --- a/arch/x86/kernel/dumpstack.c +++ b/arch/x86/kernel/dumpstack.c @@ -252,7 +252,8 @@ int __kprobes __die(const char *str, struct pt_regs *regs, long err) unsigned short ss; unsigned long sp; #endif - printk(KERN_EMERG "%s: %04lx [#%d] ", str, err & 0xffff, ++die_counter); + printk(KERN_DEFAULT + "%s: %04lx [#%d] ", str, err & 0xffff, ++die_counter); #ifdef CONFIG_PREEMPT printk("PREEMPT "); #endif diff --git a/arch/x86/kernel/dumpstack_64.c b/arch/x86/kernel/dumpstack_64.c index 6d728d9284b..17107bd6e1f 100644 --- a/arch/x86/kernel/dumpstack_64.c +++ b/arch/x86/kernel/dumpstack_64.c @@ -129,7 +129,7 @@ void dump_trace(struct task_struct *task, struct pt_regs *regs, if (!stack) { if (regs) stack = (unsigned long *)regs->sp; - else if (task && task != current) + else if (task != current) stack = (unsigned long *)task->thread.sp; else stack = &dummy; @@ -269,11 +269,11 @@ void show_registers(struct pt_regs *regs) unsigned char c; u8 *ip; - printk(KERN_EMERG "Stack:\n"); + printk(KERN_DEFAULT "Stack:\n"); show_stack_log_lvl(NULL, regs, (unsigned long *)sp, - 0, KERN_EMERG); + 0, KERN_DEFAULT); - printk(KERN_EMERG "Code: "); + printk(KERN_DEFAULT "Code: "); ip = (u8 *)regs->ip - code_prologue; if (ip < (u8 *)PAGE_OFFSET || probe_kernel_address(ip, c)) { diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c index 485204f58cd..80bfe1ab003 100644 --- a/arch/x86/kernel/process_32.c +++ b/arch/x86/kernel/process_32.c @@ -299,22 +299,11 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p) *next = &next_p->thread; int cpu = smp_processor_id(); struct tss_struct *tss = &per_cpu(init_tss, cpu); - bool preload_fpu; + fpu_switch_t fpu; /* never put a printk in __switch_to... printk() calls wake_up*() indirectly */ - /* - * If the task has used fpu the last 5 timeslices, just do a full - * restore of the math state immediately to avoid the trap; the - * chances of needing FPU soon are obviously high now - */ - preload_fpu = tsk_used_math(next_p) && next_p->fpu_counter > 5; - - __unlazy_fpu(prev_p); - - /* we're going to use this soon, after a few expensive things */ - if (preload_fpu) - prefetch(next->fpu.state); + fpu = switch_fpu_prepare(prev_p, next_p); /* * Reload esp0. @@ -354,11 +343,6 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p) task_thread_info(next_p)->flags & _TIF_WORK_CTXSW_NEXT)) __switch_to_xtra(prev_p, next_p, tss); - /* If we're going to preload the fpu context, make sure clts - is run while we're batching the cpu state updates. */ - if (preload_fpu) - clts(); - /* * Leave lazy mode, flushing any hypercalls made here. * This must be done before restoring TLS segments so @@ -368,15 +352,14 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p) */ arch_end_context_switch(next_p); - if (preload_fpu) - __math_state_restore(); - /* * Restore %gs if needed (which is common) */ if (prev->gs | next->gs) lazy_load_gs(next->gs); + switch_fpu_finish(next_p, fpu); + percpu_write(current_task, next_p); return prev_p; diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c index 9b9fe4a85c8..1fd94bc4279 100644 --- a/arch/x86/kernel/process_64.c +++ b/arch/x86/kernel/process_64.c @@ -386,18 +386,9 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p) int cpu = smp_processor_id(); struct tss_struct *tss = &per_cpu(init_tss, cpu); unsigned fsindex, gsindex; - bool preload_fpu; + fpu_switch_t fpu; - /* - * If the task has used fpu the last 5 timeslices, just do a full - * restore of the math state immediately to avoid the trap; the - * chances of needing FPU soon are obviously high now - */ - preload_fpu = tsk_used_math(next_p) && next_p->fpu_counter > 5; - - /* we're going to use this soon, after a few expensive things */ - if (preload_fpu) - prefetch(next->fpu.state); + fpu = switch_fpu_prepare(prev_p, next_p); /* * Reload esp0, LDT and the page table pointer: @@ -427,13 +418,6 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p) load_TLS(next, cpu); - /* Must be after DS reload */ - __unlazy_fpu(prev_p); - - /* Make sure cpu is ready for new context */ - if (preload_fpu) - clts(); - /* * Leave lazy mode, flushing any hypercalls made here. * This must be done before restoring TLS segments so @@ -474,6 +458,8 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p) wrmsrl(MSR_KERNEL_GS_BASE, next->gs); prev->gsindex = gsindex; + switch_fpu_finish(next_p, fpu); + /* * Switch the PDA and FPU contexts. */ @@ -492,13 +478,6 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p) task_thread_info(prev_p)->flags & _TIF_WORK_CTXSW_PREV)) __switch_to_xtra(prev_p, next_p, tss); - /* - * Preload the FPU context, now that we've determined that the - * task is likely to be using it. - */ - if (preload_fpu) - __math_state_restore(); - return prev_p; } diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index 37a458b521a..d840e69a853 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -39,6 +39,14 @@ static int reboot_mode; enum reboot_type reboot_type = BOOT_ACPI; int reboot_force; +/* This variable is used privately to keep track of whether or not + * reboot_type is still set to its default value (i.e., reboot= hasn't + * been set on the command line). This is needed so that we can + * suppress DMI scanning for reboot quirks. Without it, it's + * impossible to override a faulty reboot quirk without recompiling. + */ +static int reboot_default = 1; + #if defined(CONFIG_X86_32) && defined(CONFIG_SMP) static int reboot_cpu = -1; #endif @@ -67,6 +75,12 @@ bool port_cf9_safe = false; static int __init reboot_setup(char *str) { for (;;) { + /* Having anything passed on the command line via + * reboot= will cause us to disable DMI checking + * below. + */ + reboot_default = 0; + switch (*str) { case 'w': reboot_mode = 0x1234; @@ -295,14 +309,6 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = { DMI_MATCH(DMI_BOARD_NAME, "P4S800"), }, }, - { /* Handle problems with rebooting on VersaLogic Menlow boards */ - .callback = set_bios_reboot, - .ident = "VersaLogic Menlow based board", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "VersaLogic Corporation"), - DMI_MATCH(DMI_BOARD_NAME, "VersaLogic Menlow board"), - }, - }, { /* Handle reboot issue on Acer Aspire one */ .callback = set_kbd_reboot, .ident = "Acer Aspire One A110", @@ -316,7 +322,12 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = { static int __init reboot_init(void) { - dmi_check_system(reboot_dmi_table); + /* Only do the DMI check if reboot_type hasn't been overridden + * on the command line + */ + if (reboot_default) { + dmi_check_system(reboot_dmi_table); + } return 0; } core_initcall(reboot_init); @@ -465,7 +476,12 @@ static struct dmi_system_id __initdata pci_reboot_dmi_table[] = { static int __init pci_reboot_init(void) { - dmi_check_system(pci_reboot_dmi_table); + /* Only do the DMI check if reboot_type hasn't been overridden + * on the command line + */ + if (reboot_default) { + dmi_check_system(pci_reboot_dmi_table); + } return 0; } core_initcall(pci_reboot_init); diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c index 482ec3af206..77da5b475ad 100644 --- a/arch/x86/kernel/traps.c +++ b/arch/x86/kernel/traps.c @@ -571,25 +571,34 @@ asmlinkage void __attribute__((weak)) smp_threshold_interrupt(void) } /* - * __math_state_restore assumes that cr0.TS is already clear and the - * fpu state is all ready for use. Used during context switch. + * This gets called with the process already owning the + * FPU state, and with CR0.TS cleared. It just needs to + * restore the FPU register state. */ -void __math_state_restore(void) +void __math_state_restore(struct task_struct *tsk) { - struct thread_info *thread = current_thread_info(); - struct task_struct *tsk = thread->task; + /* We need a safe address that is cheap to find and that is already + in L1. We've just brought in "tsk->thread.has_fpu", so use that */ +#define safe_address (tsk->thread.has_fpu) + + /* AMD K7/K8 CPUs don't save/restore FDP/FIP/FOP unless an exception + is pending. Clear the x87 state here by setting it to fixed + values. safe_address is a random variable that should be in L1 */ + alternative_input( + ASM_NOP8 ASM_NOP2, + "emms\n\t" /* clear stack tags */ + "fildl %P[addr]", /* set F?P to defined value */ + X86_FEATURE_FXSAVE_LEAK, + [addr] "m" (safe_address)); /* * Paranoid restore. send a SIGSEGV if we fail to restore the state. */ if (unlikely(restore_fpu_checking(tsk))) { - stts(); + __thread_fpu_end(tsk); force_sig(SIGSEGV, tsk); return; } - - thread->status |= TS_USEDFPU; /* So we fnsave on switch_to() */ - tsk->fpu_counter++; } /* @@ -599,13 +608,12 @@ void __math_state_restore(void) * Careful.. There are problems with IBM-designed IRQ13 behaviour. * Don't touch unless you *really* know how it works. * - * Must be called with kernel preemption disabled (in this case, - * local interrupts are disabled at the call-site in entry.S). + * Must be called with kernel preemption disabled (eg with local + * local interrupts as in the case of do_device_not_available). */ -asmlinkage void math_state_restore(void) +void math_state_restore(void) { - struct thread_info *thread = current_thread_info(); - struct task_struct *tsk = thread->task; + struct task_struct *tsk = current; if (!tsk_used_math(tsk)) { local_irq_enable(); @@ -622,9 +630,10 @@ asmlinkage void math_state_restore(void) local_irq_disable(); } - clts(); /* Allow maths ops (or we recurse) */ + __thread_fpu_begin(tsk); + __math_state_restore(tsk); - __math_state_restore(); + tsk->fpu_counter++; } EXPORT_SYMBOL_GPL(math_state_restore); diff --git a/arch/x86/kernel/xsave.c b/arch/x86/kernel/xsave.c index a3911343976..71109111411 100644 --- a/arch/x86/kernel/xsave.c +++ b/arch/x86/kernel/xsave.c @@ -47,7 +47,7 @@ void __sanitize_i387_state(struct task_struct *tsk) if (!fx) return; - BUG_ON(task_thread_info(tsk)->status & TS_USEDFPU); + BUG_ON(__thread_has_fpu(tsk)); xstate_bv = tsk->thread.fpu.state->xsave.xsave_hdr.xstate_bv; @@ -168,7 +168,7 @@ int save_i387_xstate(void __user *buf) if (!used_math()) return 0; - if (task_thread_info(tsk)->status & TS_USEDFPU) { + if (user_has_fpu()) { if (use_xsave()) err = xsave_user(buf); else @@ -176,8 +176,7 @@ int save_i387_xstate(void __user *buf) if (err) return err; - task_thread_info(tsk)->status &= ~TS_USEDFPU; - stts(); + user_fpu_end(); } else { sanitize_i387_state(tsk); if (__copy_to_user(buf, &tsk->thread.fpu.state->fxsave, @@ -292,10 +291,7 @@ int restore_i387_xstate(void __user *buf) return err; } - if (!(task_thread_info(current)->status & TS_USEDFPU)) { - clts(); - task_thread_info(current)->status |= TS_USEDFPU; - } + user_fpu_begin(); if (use_xsave()) err = restore_user_xstate(buf); else diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c index 05a562b8502..0982507b962 100644 --- a/arch/x86/kvm/emulate.c +++ b/arch/x86/kvm/emulate.c @@ -1891,6 +1891,51 @@ setup_syscalls_segments(struct x86_emulate_ctxt *ctxt, ss->p = 1; } +static bool em_syscall_is_enabled(struct x86_emulate_ctxt *ctxt) +{ + struct x86_emulate_ops *ops = ctxt->ops; + u32 eax, ebx, ecx, edx; + + /* + * syscall should always be enabled in longmode - so only become + * vendor specific (cpuid) if other modes are active... + */ + if (ctxt->mode == X86EMUL_MODE_PROT64) + return true; + + eax = 0x00000000; + ecx = 0x00000000; + if (ops->get_cpuid(ctxt, &eax, &ebx, &ecx, &edx)) { + /* + * Intel ("GenuineIntel") + * remark: Intel CPUs only support "syscall" in 64bit + * longmode. Also an 64bit guest with a + * 32bit compat-app running will #UD !! While this + * behaviour can be fixed (by emulating) into AMD + * response - CPUs of AMD can't behave like Intel. + */ + if (ebx == X86EMUL_CPUID_VENDOR_GenuineIntel_ebx && + ecx == X86EMUL_CPUID_VENDOR_GenuineIntel_ecx && + edx == X86EMUL_CPUID_VENDOR_GenuineIntel_edx) + return false; + + /* AMD ("AuthenticAMD") */ + if (ebx == X86EMUL_CPUID_VENDOR_AuthenticAMD_ebx && + ecx == X86EMUL_CPUID_VENDOR_AuthenticAMD_ecx && + edx == X86EMUL_CPUID_VENDOR_AuthenticAMD_edx) + return true; + + /* AMD ("AMDisbetter!") */ + if (ebx == X86EMUL_CPUID_VENDOR_AMDisbetterI_ebx && + ecx == X86EMUL_CPUID_VENDOR_AMDisbetterI_ecx && + edx == X86EMUL_CPUID_VENDOR_AMDisbetterI_edx) + return true; + } + + /* default: (not Intel, not AMD), apply Intel's stricter rules... */ + return false; +} + static int em_syscall(struct x86_emulate_ctxt *ctxt) { struct x86_emulate_ops *ops = ctxt->ops; @@ -1904,9 +1949,15 @@ static int em_syscall(struct x86_emulate_ctxt *ctxt) ctxt->mode == X86EMUL_MODE_VM86) return emulate_ud(ctxt); + if (!(em_syscall_is_enabled(ctxt))) + return emulate_ud(ctxt); + ops->get_msr(ctxt, MSR_EFER, &efer); setup_syscalls_segments(ctxt, &cs, &ss); + if (!(efer & EFER_SCE)) + return emulate_ud(ctxt); + ops->get_msr(ctxt, MSR_STAR, &msr_data); msr_data >>= 32; cs_sel = (u16)(msr_data & 0xfffc); diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index d29216c462b..3b4c8d8ad90 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -1457,7 +1457,7 @@ static void __vmx_load_host_state(struct vcpu_vmx *vmx) #ifdef CONFIG_X86_64 wrmsrl(MSR_KERNEL_GS_BASE, vmx->msr_host_kernel_gs_base); #endif - if (current_thread_info()->status & TS_USEDFPU) + if (__thread_has_fpu(current)) clts(); load_gdt(&__get_cpu_var(host_gdt)); } diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 14d6cadc4ba..9cbfc069811 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -1495,6 +1495,8 @@ static void record_steal_time(struct kvm_vcpu *vcpu) int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data) { + bool pr = false; + switch (msr) { case MSR_EFER: return set_efer(vcpu, data); @@ -1635,6 +1637,18 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data) pr_unimpl(vcpu, "unimplemented perfctr wrmsr: " "0x%x data 0x%llx\n", msr, data); break; + case MSR_P6_PERFCTR0: + case MSR_P6_PERFCTR1: + pr = true; + case MSR_P6_EVNTSEL0: + case MSR_P6_EVNTSEL1: + if (kvm_pmu_msr(vcpu, msr)) + return kvm_pmu_set_msr(vcpu, msr, data); + + if (pr || data != 0) + pr_unimpl(vcpu, "disabled perfctr wrmsr: " + "0x%x data 0x%llx\n", msr, data); + break; case MSR_K7_CLK_CTL: /* * Ignore all writes to this no longer documented MSR. @@ -1835,6 +1849,14 @@ int kvm_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata) case MSR_FAM10H_MMIO_CONF_BASE: data = 0; break; + case MSR_P6_PERFCTR0: + case MSR_P6_PERFCTR1: + case MSR_P6_EVNTSEL0: + case MSR_P6_EVNTSEL1: + if (kvm_pmu_msr(vcpu, msr)) + return kvm_pmu_get_msr(vcpu, msr, pdata); + data = 0; + break; case MSR_IA32_UCODE_REV: data = 0x100000000ULL; break; @@ -4180,6 +4202,28 @@ static int emulator_intercept(struct x86_emulate_ctxt *ctxt, return kvm_x86_ops->check_intercept(emul_to_vcpu(ctxt), info, stage); } +static bool emulator_get_cpuid(struct x86_emulate_ctxt *ctxt, + u32 *eax, u32 *ebx, u32 *ecx, u32 *edx) +{ + struct kvm_cpuid_entry2 *cpuid = NULL; + + if (eax && ecx) + cpuid = kvm_find_cpuid_entry(emul_to_vcpu(ctxt), + *eax, *ecx); + + if (cpuid) { + *eax = cpuid->eax; + *ecx = cpuid->ecx; + if (ebx) + *ebx = cpuid->ebx; + if (edx) + *edx = cpuid->edx; + return true; + } + + return false; +} + static struct x86_emulate_ops emulate_ops = { .read_std = kvm_read_guest_virt_system, .write_std = kvm_write_guest_virt_system, @@ -4211,6 +4255,7 @@ static struct x86_emulate_ops emulate_ops = { .get_fpu = emulator_get_fpu, .put_fpu = emulator_put_fpu, .intercept = emulator_intercept, + .get_cpuid = emulator_get_cpuid, }; static void cache_all_regs(struct kvm_vcpu *vcpu) diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c index 9d74824a708..f0b4caf85c1 100644 --- a/arch/x86/mm/fault.c +++ b/arch/x86/mm/fault.c @@ -673,7 +673,7 @@ no_context(struct pt_regs *regs, unsigned long error_code, stackend = end_of_stack(tsk); if (tsk != &init_task && *stackend != STACK_END_MAGIC) - printk(KERN_ALERT "Thread overran stack, or stack corrupted\n"); + printk(KERN_EMERG "Thread overran stack, or stack corrupted\n"); tsk->thread.cr2 = address; tsk->thread.trap_no = 14; @@ -684,7 +684,7 @@ no_context(struct pt_regs *regs, unsigned long error_code, sig = 0; /* Executive summary in case the body of the oops scrolled away */ - printk(KERN_EMERG "CR2: %016lx\n", address); + printk(KERN_DEFAULT "CR2: %016lx\n", address); oops_end(flags, regs, sig); } diff --git a/arch/x86/pci/xen.c b/arch/x86/pci/xen.c index 492ade8c978..d99346ea8fd 100644 --- a/arch/x86/pci/xen.c +++ b/arch/x86/pci/xen.c @@ -374,7 +374,7 @@ int __init pci_xen_init(void) int __init pci_xen_hvm_init(void) { - if (!xen_feature(XENFEAT_hvm_pirqs)) + if (!xen_have_vector_callback || !xen_feature(XENFEAT_hvm_pirqs)) return 0; #ifdef CONFIG_ACPI diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c index 041d4fe9dfe..501d4e0244b 100644 --- a/arch/x86/xen/smp.c +++ b/arch/x86/xen/smp.c @@ -409,6 +409,13 @@ static void __cpuinit xen_play_dead(void) /* used only with HOTPLUG_CPU */ play_dead_common(); HYPERVISOR_vcpu_op(VCPUOP_down, smp_processor_id(), NULL); cpu_bringup(); + /* + * Balance out the preempt calls - as we are running in cpu_idle + * loop which has been called at bootup from cpu_bringup_and_idle. + * The cpucpu_bringup_and_idle called cpu_bringup which made a + * preempt_disable() So this preempt_enable will balance it out. + */ + preempt_enable(); } #else /* !CONFIG_HOTPLUG_CPU */ diff --git a/arch/xtensa/include/asm/string.h b/arch/xtensa/include/asm/string.h index 5fb8c27cbef..405a8c49ff2 100644 --- a/arch/xtensa/include/asm/string.h +++ b/arch/xtensa/include/asm/string.h @@ -118,7 +118,4 @@ extern void *memmove(void *__dest, __const__ void *__src, size_t __n); /* Don't build bcopy at all ... */ #define __HAVE_ARCH_BCOPY -#define __HAVE_ARCH_MEMSCAN -#define memscan memchr - #endif /* _XTENSA_STRING_H */ |