summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/sh/Kconfig13
-rw-r--r--arch/sh/Makefile1
-rw-r--r--arch/sh/boards/mpc1211/Makefile8
-rw-r--r--arch/sh/boards/mpc1211/pci.c295
-rw-r--r--arch/sh/boards/mpc1211/rtc.c136
-rw-r--r--arch/sh/boards/mpc1211/setup.c347
-rw-r--r--arch/sh/tools/mach-types1
7 files changed, 2 insertions, 799 deletions
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 563f8af0850..8a68160079a 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -448,14 +448,6 @@ config SH_DREAMCAST
Select Dreamcast if configuring for a SEGA Dreamcast.
More information at <http://www.linux-sh.org>
-config SH_MPC1211
- bool "Interface MPC1211"
- depends on CPU_SUBTYPE_SH7751 && BROKEN
- help
- CTP/PCI-SH02 is a CPU module computer that is produced
- by Interface Corporation.
- More information at <http://www.interface.co.jp>
-
config SH_SH03
bool "Interface CTP/PCI-SH03"
depends on CPU_SUBTYPE_SH7751
@@ -657,8 +649,7 @@ source "arch/sh/drivers/Kconfig"
endmenu
config ISA_DMA_API
- def_bool y
- depends on SH_MPC1211
+ bool
menu "Kernel features"
@@ -763,7 +754,7 @@ menu "Boot options"
config ZERO_PAGE_OFFSET
hex "Zero page offset"
- default "0x00004000" if SH_MPC1211 || SH_SH03
+ default "0x00004000" if SH_SH03
default "0x00010000" if PAGE_SIZE_64KB
default "0x00002000" if PAGE_SIZE_8KB
default "0x00001000"
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index bb06f83e623..8050b03d51f 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -110,7 +110,6 @@ machdir-$(CONFIG_SH_7343_SOLUTION_ENGINE) += se/7343
machdir-$(CONFIG_SH_7721_SOLUTION_ENGINE) += se/7721
machdir-$(CONFIG_SH_HP6XX) += hp6xx
machdir-$(CONFIG_SH_DREAMCAST) += dreamcast
-machdir-$(CONFIG_SH_MPC1211) += mpc1211
machdir-$(CONFIG_SH_SH03) += sh03
machdir-$(CONFIG_SH_SECUREEDGE5410) += snapgear
machdir-$(CONFIG_SH_RTS7751R2D) += renesas/rts7751r2d
diff --git a/arch/sh/boards/mpc1211/Makefile b/arch/sh/boards/mpc1211/Makefile
deleted file mode 100644
index 8cd31b5d200..00000000000
--- a/arch/sh/boards/mpc1211/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# Makefile for the Interface (CTP/PCI/MPC-SH02) specific parts of the kernel
-#
-
-obj-y := setup.o rtc.o
-
-obj-$(CONFIG_PCI) += pci.o
-
diff --git a/arch/sh/boards/mpc1211/pci.c b/arch/sh/boards/mpc1211/pci.c
deleted file mode 100644
index 23849f70f13..00000000000
--- a/arch/sh/boards/mpc1211/pci.c
+++ /dev/null
@@ -1,295 +0,0 @@
-/*
- * Low-Level PCI Support for the MPC-1211(CTP/PCI/MPC-SH02)
- *
- * (c) 2002-2003 Saito.K & Jeanne
- *
- * Dustin McIntire (dustin@sensoria.com)
- * Derived from arch/i386/kernel/pci-*.c which bore the message:
- * (c) 1999--2000 Martin Mares <mj@ucw.cz>
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- */
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/errno.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-
-#include <asm/machvec.h>
-#include <asm/io.h>
-#include <asm/mpc1211/pci.h>
-
-static struct resource mpcpci_io_resource = {
- "MPCPCI IO",
- 0x00000000,
- 0xffffffff,
- IORESOURCE_IO
-};
-
-static struct resource mpcpci_mem_resource = {
- "MPCPCI mem",
- 0x00000000,
- 0xffffffff,
- IORESOURCE_MEM
-};
-
-static struct pci_ops pci_direct_conf1;
-struct pci_channel board_pci_channels[] = {
- {&pci_direct_conf1, &mpcpci_io_resource, &mpcpci_mem_resource, 0, 256},
- {NULL, NULL, NULL, 0, 0},
-};
-
-/*
- * Direct access to PCI hardware...
- */
-
-
-#define CONFIG_CMD(bus, devfn, where) (0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3))
-
-/*
- * Functions for accessing PCI configuration space with type 1 accesses
- */
-static int pci_conf1_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *value)
-{
- u32 word;
- unsigned long flags;
-
- /*
- * PCIPDR may only be accessed as 32 bit words,
- * so we must do byte alignment by hand
- */
- local_irq_save(flags);
- writel(CONFIG_CMD(bus,devfn,where), PCIPAR);
- word = readl(PCIPDR);
- local_irq_restore(flags);
-
- switch (size) {
- case 1:
- switch (where & 0x3) {
- case 3:
- *value = (u8)(word >> 24);
- break;
- case 2:
- *value = (u8)(word >> 16);
- break;
- case 1:
- *value = (u8)(word >> 8);
- break;
- default:
- *value = (u8)word;
- break;
- }
- break;
- case 2:
- switch (where & 0x3) {
- case 3:
- *value = (u16)(word >> 24);
- local_irq_save(flags);
- writel(CONFIG_CMD(bus,devfn,(where+1)), PCIPAR);
- word = readl(PCIPDR);
- local_irq_restore(flags);
- *value |= ((word & 0xff) << 8);
- break;
- case 2:
- *value = (u16)(word >> 16);
- break;
- case 1:
- *value = (u16)(word >> 8);
- break;
- default:
- *value = (u16)word;
- break;
- }
- break;
- case 4:
- *value = word;
- break;
- }
- PCIDBG(4,"pci_conf1_read@0x%08x=0x%x\n", CONFIG_CMD(bus,devfn,where),*value);
- return PCIBIOS_SUCCESSFUL;
-}
-
-/*
- * Since MPC-1211 only does 32bit access we'll have to do a read,mask,write operation.
- * We'll allow an odd byte offset, though it should be illegal.
- */
-static int pci_conf1_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value)
-{
- u32 word,mask = 0;
- unsigned long flags;
- u32 shift = (where & 3) * 8;
-
- if(size == 1) {
- mask = ((1 << 8) - 1) << shift; // create the byte mask
- } else if(size == 2){
- if(shift == 24)
- return PCIBIOS_BAD_REGISTER_NUMBER;
- mask = ((1 << 16) - 1) << shift; // create the word mask
- }
- local_irq_save(flags);
- writel(CONFIG_CMD(bus,devfn,where), PCIPAR);
- if(size == 4){
- writel(value, PCIPDR);
- local_irq_restore(flags);
- PCIDBG(4,"pci_conf1_write@0x%08x=0x%x\n", CONFIG_CMD(bus,devfn,where),value);
- return PCIBIOS_SUCCESSFUL;
- }
- word = readl(PCIPDR);
- word &= ~mask;
- word |= ((value << shift) & mask);
- writel(word, PCIPDR);
- local_irq_restore(flags);
- PCIDBG(4,"pci_conf1_write@0x%08x=0x%x\n", CONFIG_CMD(bus,devfn,where),word);
- return PCIBIOS_SUCCESSFUL;
-}
-
-#undef CONFIG_CMD
-
-static struct pci_ops pci_direct_conf1 = {
- .read = pci_conf1_read,
- .write = pci_conf1_write,
-};
-
-static void __devinit quirk_ali_ide_ports(struct pci_dev *dev)
-{
- dev->resource[0].start = 0x1f0;
- dev->resource[0].end = 0x1f7;
- dev->resource[0].flags = IORESOURCE_IO;
- dev->resource[1].start = 0x3f6;
- dev->resource[1].end = 0x3f6;
- dev->resource[1].flags = IORESOURCE_IO;
- dev->resource[2].start = 0x170;
- dev->resource[2].end = 0x177;
- dev->resource[2].flags = IORESOURCE_IO;
- dev->resource[3].start = 0x376;
- dev->resource[3].end = 0x376;
- dev->resource[3].flags = IORESOURCE_IO;
- dev->resource[4].start = 0xf000;
- dev->resource[4].end = 0xf00f;
- dev->resource[4].flags = IORESOURCE_IO;
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M5229, quirk_ali_ide_ports);
-
-char * __devinit pcibios_setup(char *str)
-{
- return str;
-}
-
-/*
- * Called after each bus is probed, but before its children
- * are examined.
- */
-
-void __devinit pcibios_fixup_bus(struct pci_bus *b)
-{
- pci_read_bridge_bases(b);
-}
-
-/*
- * IRQ functions
- */
-static inline u8 bridge_swizzle(u8 pin, u8 slot)
-{
- return (((pin-1) + slot) % 4) + 1;
-}
-
-static inline u8 bridge_swizzle_pci_1(u8 pin, u8 slot)
-{
- return (((pin-1) - slot) & 3) + 1;
-}
-
-static u8 __init mpc1211_swizzle(struct pci_dev *dev, u8 *pinp)
-{
- unsigned long flags;
- u8 pin = *pinp;
- u32 word;
-
- for ( ; dev->bus->self; dev = dev->bus->self) {
- if (!pin)
- continue;
-
- if (dev->bus->number == 1) {
- local_irq_save(flags);
- writel(0x80000000 | 0x2c, PCIPAR);
- word = readl(PCIPDR);
- local_irq_restore(flags);
- word >>= 16;
-
- if (word == 0x0001)
- pin = bridge_swizzle_pci_1(pin, PCI_SLOT(dev->devfn));
- else
- pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn));
- } else
- pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn));
- }
-
- *pinp = pin;
-
- return PCI_SLOT(dev->devfn);
-}
-
-static int __init map_mpc1211_irq(struct pci_dev *dev, u8 slot, u8 pin)
-{
- int irq = -1;
-
- /* now lookup the actual IRQ on a platform specific basis (pci-'platform'.c) */
- if (dev->bus->number == 0) {
- switch (slot) {
- case 13: irq = 9; break; /* USB */
- case 22: irq = 10; break; /* LAN */
- default: irq = 0; break;
- }
- } else {
- switch (pin) {
- case 0: irq = 0; break;
- case 1: irq = 7; break;
- case 2: irq = 9; break;
- case 3: irq = 10; break;
- case 4: irq = 11; break;
- }
- }
-
- if( irq < 0 ) {
- PCIDBG(3, "PCI: Error mapping IRQ on device %s\n", pci_name(dev));
- return irq;
- }
-
- PCIDBG(2, "Setting IRQ for slot %s to %d\n", pci_name(dev), irq);
-
- return irq;
-}
-
-void __init pcibios_fixup_irqs(void)
-{
- pci_fixup_irqs(mpc1211_swizzle, map_mpc1211_irq);
-}
-
-void pcibios_align_resource(void *data, struct resource *res,
- resource_size_t size, resource_size_t align)
-{
- resource_size_t start = res->start;
-
- if (res->flags & IORESOURCE_IO) {
- if (start >= 0x10000UL) {
- if ((start & 0xffffUL) < 0x4000UL) {
- start = (start & 0xffff0000UL) + 0x4000UL;
- } else if ((start & 0xffffUL) >= 0xf000UL) {
- start = (start & 0xffff0000UL) + 0x10000UL;
- }
- res->start = start;
- } else {
- if (start & 0x300) {
- start = (start + 0x3ff) & ~0x3ff;
- res->start = start;
- }
- }
- }
-}
-
diff --git a/arch/sh/boards/mpc1211/rtc.c b/arch/sh/boards/mpc1211/rtc.c
deleted file mode 100644
index 03b123a4bba..00000000000
--- a/arch/sh/boards/mpc1211/rtc.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * linux/arch/sh/kernel/rtc-mpc1211.c -- MPC-1211 on-chip RTC support
- *
- * Copyright (C) 2002 Saito.K & Jeanne
- *
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/time.h>
-#include <linux/bcd.h>
-#include <linux/mc146818rtc.h>
-
-unsigned long get_cmos_time(void)
-{
- unsigned int year, mon, day, hour, min, sec;
-
- spin_lock(&rtc_lock);
-
- do {
- sec = CMOS_READ(RTC_SECONDS);
- min = CMOS_READ(RTC_MINUTES);
- hour = CMOS_READ(RTC_HOURS);
- day = CMOS_READ(RTC_DAY_OF_MONTH);
- mon = CMOS_READ(RTC_MONTH);
- year = CMOS_READ(RTC_YEAR);
- } while (sec != CMOS_READ(RTC_SECONDS));
-
- if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
- BCD_TO_BIN(sec);
- BCD_TO_BIN(min);
- BCD_TO_BIN(hour);
- BCD_TO_BIN(day);
- BCD_TO_BIN(mon);
- BCD_TO_BIN(year);
- }
-
- spin_unlock(&rtc_lock);
-
- year += 1900;
- if (year < 1970)
- year += 100;
-
- return mktime(year, mon, day, hour, min, sec);
-}
-
-void mpc1211_rtc_gettimeofday(struct timeval *tv)
-{
-
- tv->tv_sec = get_cmos_time();
- tv->tv_usec = 0;
-}
-
-/* arc/i386/kernel/time.c */
-/*
- * In order to set the CMOS clock precisely, set_rtc_mmss has to be
- * called 500 ms after the second nowtime has started, because when
- * nowtime is written into the registers of the CMOS clock, it will
- * jump to the next second precisely 500 ms later. Check the Motorola
- * MC146818A or Dallas DS12887 data sheet for details.
- *
- * BUG: This routine does not handle hour overflow properly; it just
- * sets the minutes. Usually you'll only notice that after reboot!
- */
-static int set_rtc_mmss(unsigned long nowtime)
-{
- int retval = 0;
- int real_seconds, real_minutes, cmos_minutes;
- unsigned char save_control, save_freq_select;
-
- /* gets recalled with irq locally disabled */
- spin_lock(&rtc_lock);
- save_control = CMOS_READ(RTC_CONTROL); /* tell the clock it's being set */
- CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL);
-
- save_freq_select = CMOS_READ(RTC_FREQ_SELECT); /* stop and reset prescaler */
- CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
-
- cmos_minutes = CMOS_READ(RTC_MINUTES);
- if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
- BCD_TO_BIN(cmos_minutes);
-
- /*
- * since we're only adjusting minutes and seconds,
- * don't interfere with hour overflow. This avoids
- * messing with unknown time zones but requires your
- * RTC not to be off by more than 15 minutes
- */
- real_seconds = nowtime % 60;
- real_minutes = nowtime / 60;
- if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1)
- real_minutes += 30; /* correct for half hour time zone */
- real_minutes %= 60;
-
- if (abs(real_minutes - cmos_minutes) < 30) {
- if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
- BIN_TO_BCD(real_seconds);
- BIN_TO_BCD(real_minutes);
- }
- CMOS_WRITE(real_seconds,RTC_SECONDS);
- CMOS_WRITE(real_minutes,RTC_MINUTES);
- } else {
- printk(KERN_WARNING
- "set_rtc_mmss: can't update from %d to %d\n",
- cmos_minutes, real_minutes);
- retval = -1;
- }
-
- /* The following flags have to be released exactly in this order,
- * otherwise the DS12887 (popular MC146818A clone with integrated
- * battery and quartz) will not reset the oscillator and will not
- * update precisely 500 ms later. You won't find this mentioned in
- * the Dallas Semiconductor data sheets, but who believes data
- * sheets anyway ... -- Markus Kuhn
- */
- CMOS_WRITE(save_control, RTC_CONTROL);
- CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
- spin_unlock(&rtc_lock);
-
- return retval;
-}
-
-int mpc1211_rtc_settimeofday(const struct timeval *tv)
-{
- unsigned long nowtime = tv->tv_sec;
-
- return set_rtc_mmss(nowtime);
-}
-
-void mpc1211_time_init(void)
-{
- rtc_sh_get_time = mpc1211_rtc_gettimeofday;
- rtc_sh_set_time = mpc1211_rtc_settimeofday;
-}
-
diff --git a/arch/sh/boards/mpc1211/setup.c b/arch/sh/boards/mpc1211/setup.c
deleted file mode 100644
index fede36361dc..00000000000
--- a/arch/sh/boards/mpc1211/setup.c
+++ /dev/null
@@ -1,347 +0,0 @@
-/*
- * linux/arch/sh/boards/mpc1211/setup.c
- *
- * Copyright (C) 2002 Saito.K & Jeanne, Fujii.Y
- *
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/hdreg.h>
-#include <linux/ide.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <asm/io.h>
-#include <asm/machvec.h>
-#include <asm/mpc1211/mpc1211.h>
-#include <asm/mpc1211/pci.h>
-#include <asm/mpc1211/m1543c.h>
-
-/* ALI15X3 SMBus address offsets */
-#define SMBHSTSTS (0 + 0x3100)
-#define SMBHSTCNT (1 + 0x3100)
-#define SMBHSTSTART (2 + 0x3100)
-#define SMBHSTCMD (7 + 0x3100)
-#define SMBHSTADD (3 + 0x3100)
-#define SMBHSTDAT0 (4 + 0x3100)
-#define SMBHSTDAT1 (5 + 0x3100)
-#define SMBBLKDAT (6 + 0x3100)
-
-/* Other settings */
-#define MAX_TIMEOUT 500 /* times 1/100 sec */
-
-/* ALI15X3 command constants */
-#define ALI15X3_ABORT 0x04
-#define ALI15X3_T_OUT 0x08
-#define ALI15X3_QUICK 0x00
-#define ALI15X3_BYTE 0x10
-#define ALI15X3_BYTE_DATA 0x20
-#define ALI15X3_WORD_DATA 0x30
-#define ALI15X3_BLOCK_DATA 0x40
-#define ALI15X3_BLOCK_CLR 0x80
-
-/* ALI15X3 status register bits */
-#define ALI15X3_STS_IDLE 0x04
-#define ALI15X3_STS_BUSY 0x08
-#define ALI15X3_STS_DONE 0x10
-#define ALI15X3_STS_DEV 0x20 /* device error */
-#define ALI15X3_STS_COLL 0x40 /* collision or no response */
-#define ALI15X3_STS_TERM 0x80 /* terminated by abort */
-#define ALI15X3_STS_ERR 0xE0 /* all the bad error bits */
-
-static void __init pci_write_config(unsigned long busNo,
- unsigned long devNo,
- unsigned long fncNo,
- unsigned long cnfAdd,
- unsigned long cnfData)
-{
- ctrl_outl((0x80000000
- + ((busNo & 0xff) << 16)
- + ((devNo & 0x1f) << 11)
- + ((fncNo & 0x07) << 8)
- + (cnfAdd & 0xfc)), PCIPAR);
-
- ctrl_outl(cnfData, PCIPDR);
-}
-
-/*
- Initialize IRQ setting
-*/
-
-static unsigned char m_irq_mask = 0xfb;
-static unsigned char s_irq_mask = 0xff;
-
-static void disable_mpc1211_irq(unsigned int irq)
-{
- if( irq < 8) {
- m_irq_mask |= (1 << irq);
- outb(m_irq_mask,I8259_M_MR);
- } else {
- s_irq_mask |= (1 << (irq - 8));
- outb(s_irq_mask,I8259_S_MR);
- }
-
-}
-
-static void enable_mpc1211_irq(unsigned int irq)
-{
- if( irq < 8) {
- m_irq_mask &= ~(1 << irq);
- outb(m_irq_mask,I8259_M_MR);
- } else {
- s_irq_mask &= ~(1 << (irq - 8));
- outb(s_irq_mask,I8259_S_MR);
- }
-}
-
-static inline int mpc1211_irq_real(unsigned int irq)
-{
- int value;
- int irqmask;
-
- if ( irq < 8) {
- irqmask = 1<<irq;
- outb(0x0b,I8259_M_CR); /* ISR register */
- value = inb(I8259_M_CR) & irqmask;
- outb(0x0a,I8259_M_CR); /* back ro the IPR reg */
- return value;
- }
- irqmask = 1<<(irq - 8);
- outb(0x0b,I8259_S_CR); /* ISR register */
- value = inb(I8259_S_CR) & irqmask;
- outb(0x0a,I8259_S_CR); /* back ro the IPR reg */
- return value;
-}
-
-static void mask_and_ack_mpc1211(unsigned int irq)
-{
- if(irq < 8) {
- if(m_irq_mask & (1<<irq)){
- if(!mpc1211_irq_real(irq)){
- atomic_inc(&irq_err_count)
- printk("spurious 8259A interrupt: IRQ %x\n",irq);
- }
- } else {
- m_irq_mask |= (1<<irq);
- }
- inb(I8259_M_MR); /* DUMMY */
- outb(m_irq_mask,I8259_M_MR); /* disable */
- outb(0x60+irq,I8259_M_CR); /* EOI */
-
- } else {
- if(s_irq_mask & (1<<(irq - 8))){
- if(!mpc1211_irq_real(irq)){
- atomic_inc(&irq_err_count);
- printk("spurious 8259A interrupt: IRQ %x\n",irq);
- }
- } else {
- s_irq_mask |= (1<<(irq - 8));
- }
- inb(I8259_S_MR); /* DUMMY */
- outb(s_irq_mask,I8259_S_MR); /* disable */
- outb(0x60+(irq-8),I8259_S_CR); /* EOI */
- outb(0x60+2,I8259_M_CR);
- }
-}
-
-static void end_mpc1211_irq(unsigned int irq)
-{
- enable_mpc1211_irq(irq);
-}
-
-static unsigned int startup_mpc1211_irq(unsigned int irq)
-{
- enable_mpc1211_irq(irq);
- return 0;
-}
-
-static void shutdown_mpc1211_irq(unsigned int irq)
-{
- disable_mpc1211_irq(irq);
-}
-
-static struct hw_interrupt_type mpc1211_irq_type = {
- .typename = "MPC1211-IRQ",
- .startup = startup_mpc1211_irq,
- .shutdown = shutdown_mpc1211_irq,
- .enable = enable_mpc1211_irq,
- .disable = disable_mpc1211_irq,
- .ack = mask_and_ack_mpc1211,
- .end = end_mpc1211_irq
-};
-
-static void make_mpc1211_irq(unsigned int irq)
-{
- irq_desc[irq].chip = &mpc1211_irq_type;
- irq_desc[irq].status = IRQ_DISABLED;
- irq_desc[irq].action = 0;
- irq_desc[irq].depth = 1;
- disable_mpc1211_irq(irq);
-}
-
-int mpc1211_irq_demux(int irq)
-{
- unsigned int poll;
-
- if( irq == 2 ) {
- outb(0x0c,I8259_M_CR);
- poll = inb(I8259_M_CR);
- if(poll & 0x80) {
- irq = (poll & 0x07);
- }
- if( irq == 2) {
- outb(0x0c,I8259_S_CR);
- poll = inb(I8259_S_CR);
- irq = (poll & 0x07) + 8;
- }
- }
- return irq;
-}
-
-static void __init init_mpc1211_IRQ(void)
-{
- int i;
- /*
- * Super I/O (Just mimic PC):
- * 1: keyboard
- * 3: serial 1
- * 4: serial 0
- * 5: printer
- * 6: floppy
- * 8: rtc
- * 10: lan
- * 12: mouse
- * 14: ide0
- * 15: ide1
- */
-
- pci_write_config(0,0,0,0x54, 0xb0b0002d);
- outb(0x11, I8259_M_CR); /* mater icw1 edge trigger */
- outb(0x11, I8259_S_CR); /* slave icw1 edge trigger */
- outb(0x20, I8259_M_MR); /* m icw2 base vec 0x08 */
- outb(0x28, I8259_S_MR); /* s icw2 base vec 0x70 */
- outb(0x04, I8259_M_MR); /* m icw3 slave irq2 */
- outb(0x02, I8259_S_MR); /* s icw3 slave id */
- outb(0x01, I8259_M_MR); /* m icw4 non buf normal eoi*/
- outb(0x01, I8259_S_MR); /* s icw4 non buf normal eo1*/
- outb(0xfb, I8259_M_MR); /* disable irq0--irq7 */
- outb(0xff, I8259_S_MR); /* disable irq8--irq15 */
-
- for ( i=0; i < 16; i++) {
- if(i != 2) {
- make_mpc1211_irq(i);
- }
- }
-}
-
-static void delay1000(void)
-{
- int i;
-
- for (i=0; i<1000; i++)
- ctrl_delay();
-}
-
-static int put_smb_blk(unsigned char *p, int address, int command, int no)
-{
- int temp;
- int timeout;
- int i;
-
- outb(0xff, SMBHSTSTS);
- temp = inb(SMBHSTSTS);
- for (timeout = 0; (timeout < MAX_TIMEOUT) && !(temp & ALI15X3_STS_IDLE); timeout++) {
- delay1000();
- temp = inb(SMBHSTSTS);
- }
- if (timeout >= MAX_TIMEOUT){
- return -1;
- }
-
- outb(((address & 0x7f) << 1), SMBHSTADD);
- outb(0xc0, SMBHSTCNT);
- outb(command & 0xff, SMBHSTCMD);
- outb(no & 0x1f, SMBHSTDAT0);
-
- for(i = 1; i <= no; i++) {
- outb(*p++, SMBBLKDAT);
- }
- outb(0xff, SMBHSTSTART);
-
- temp = inb(SMBHSTSTS);
- for (timeout = 0; (timeout < MAX_TIMEOUT) && !(temp & (ALI15X3_STS_ERR | ALI15X3_STS_DONE)); timeout++) {
- delay1000();
- temp = inb(SMBHSTSTS);
- }
- if (timeout >= MAX_TIMEOUT) {
- return -2;
- }
- if ( temp & ALI15X3_STS_ERR ){
- return -3;
- }
- return 0;
-}
-
-static struct resource heartbeat_resources[] = {
- [0] = {
- .start = 0xa2000000,
- .end = 0xa2000000,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
- .num_resources = ARRAY_SIZE(heartbeat_resources),
- .resource = heartbeat_resources,
-};
-
-static struct platform_device *mpc1211_devices[] __initdata = {
- &heartbeat_device,
-};
-
-static int __init mpc1211_devices_setup(void)
-{
- return platform_add_devices(mpc1211_devices,
- ARRAY_SIZE(mpc1211_devices));
-}
-__initcall(mpc1211_devices_setup);
-
-/* arch/sh/boards/mpc1211/rtc.c */
-void mpc1211_time_init(void);
-
-static void __init mpc1211_setup(char **cmdline_p)
-{
- unsigned char spd_buf[128];
-
- __set_io_port_base(PA_PCI_IO);
-
- pci_write_config(0,0,0,0x54, 0xb0b00000);
-
- do {
- outb(ALI15X3_ABORT, SMBHSTCNT);
- spd_buf[0] = 0x0c;
- spd_buf[1] = 0x43;
- spd_buf[2] = 0x7f;
- spd_buf[3] = 0x03;
- spd_buf[4] = 0x00;
- spd_buf[5] = 0x03;
- spd_buf[6] = 0x00;
- } while (put_smb_blk(spd_buf, 0x69, 0, 7) < 0);
-
- board_time_init = mpc1211_time_init;
-
- return 0;
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_mpc1211 __initmv = {
- .mv_name = "Interface MPC-1211(CTP/PCI/MPC-SH02)",
- .mv_setup = mpc1211_setup,
- .mv_nr_irqs = 48,
- .mv_irq_demux = mpc1211_irq_demux,
- .mv_init_irq = init_mpc1211_IRQ,
-};
diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types
index 987c6682bf9..1bba7d36be9 100644
--- a/arch/sh/tools/mach-types
+++ b/arch/sh/tools/mach-types
@@ -28,7 +28,6 @@ HD64465 HD64465
7751SYSTEMH SH_7751_SYSTEMH
HP6XX SH_HP6XX
DREAMCAST SH_DREAMCAST
-MPC1211 SH_MPC1211
SNAPGEAR SH_SECUREEDGE5410
EDOSK7705 SH_EDOSK7705
SH4202_MICRODEV SH_SH4202_MICRODEV
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-22 14:17:04 +0000