diff options
Diffstat (limited to 'arch')
-rw-r--r-- | arch/arm/mach-ux500/cpu-db8500.c | 18 | ||||
-rw-r--r-- | arch/arm/mach-ux500/cpu.c | 2 | ||||
-rw-r--r-- | arch/arm/mach-ux500/include/mach/db8500-regs.h | 3 | ||||
-rw-r--r-- | arch/arm/mach-ux500/include/mach/prcmu.h | 1 | ||||
-rw-r--r-- | arch/arm/mach-ux500/prcmu.c | 25 |
5 files changed, 37 insertions, 12 deletions
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 5966f353890..b78970c08eb 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -40,7 +40,6 @@ static struct platform_device *platform_devs[] __initdata = { /* minimum static i/o mapping required to boot U8500 platforms */ static struct map_desc u8500_io_desc[] __initdata = { __IO_DEV_DESC(U8500_PRCMU_BASE, SZ_4K), - __IO_DEV_DESC(U8500_PRCMU_TCDM_BASE, SZ_4K), __IO_DEV_DESC(U8500_GPIO0_BASE, SZ_4K), __IO_DEV_DESC(U8500_GPIO1_BASE, SZ_4K), __IO_DEV_DESC(U8500_GPIO2_BASE, SZ_4K), @@ -48,13 +47,18 @@ static struct map_desc u8500_io_desc[] __initdata = { __MEM_DEV_DESC(U8500_BOOT_ROM_BASE, SZ_1M), }; -static struct map_desc u8500ed_io_desc[] __initdata = { +static struct map_desc u8500_ed_io_desc[] __initdata = { __IO_DEV_DESC(U8500_MTU0_BASE_ED, SZ_4K), __IO_DEV_DESC(U8500_CLKRST7_BASE_ED, SZ_8K), }; -static struct map_desc u8500v1_io_desc[] __initdata = { +static struct map_desc u8500_v1_io_desc[] __initdata = { __IO_DEV_DESC(U8500_MTU0_BASE, SZ_4K), + __IO_DEV_DESC(U8500_PRCMU_TCDM_BASE_V1, SZ_4K), +}; + +static struct map_desc u8500_v2_io_desc[] __initdata = { + __IO_DEV_DESC(U8500_PRCMU_TCDM_BASE, SZ_4K), }; /* @@ -127,9 +131,11 @@ void __init u8500_map_io(void) iotable_init(u8500_io_desc, ARRAY_SIZE(u8500_io_desc)); if (cpu_is_u8500ed()) - iotable_init(u8500ed_io_desc, ARRAY_SIZE(u8500ed_io_desc)); - else - iotable_init(u8500v1_io_desc, ARRAY_SIZE(u8500v1_io_desc)); + iotable_init(u8500_ed_io_desc, ARRAY_SIZE(u8500_ed_io_desc)); + else if (cpu_is_u8500v1()) + iotable_init(u8500_v1_io_desc, ARRAY_SIZE(u8500_v1_io_desc)); + else if (cpu_is_u8500v2()) + iotable_init(u8500_v2_io_desc, ARRAY_SIZE(u8500_v2_io_desc)); /* Read out the ASIC ID as early as we can */ get_db8500_asic_id(); diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c index 2bc0efbac58..46c372fb806 100644 --- a/arch/arm/mach-ux500/cpu.c +++ b/arch/arm/mach-ux500/cpu.c @@ -19,6 +19,7 @@ #include <mach/hardware.h> #include <mach/setup.h> #include <mach/devices.h> +#include <mach/prcmu.h> #include "clock.h" @@ -58,6 +59,7 @@ void __init ux500_init_irq(void) * Init clocks here so that they are available for system timer * initialization. */ + prcmu_early_init(); clk_init(); } diff --git a/arch/arm/mach-ux500/include/mach/db8500-regs.h b/arch/arm/mach-ux500/include/mach/db8500-regs.h index f07d0986409..0fefb34c11e 100644 --- a/arch/arm/mach-ux500/include/mach/db8500-regs.h +++ b/arch/arm/mach-ux500/include/mach/db8500-regs.h @@ -92,7 +92,8 @@ #define U8500_SCR_BASE (U8500_PER4_BASE + 0x05000) #define U8500_DMC_BASE (U8500_PER4_BASE + 0x06000) #define U8500_PRCMU_BASE (U8500_PER4_BASE + 0x07000) -#define U8500_PRCMU_TCDM_BASE (U8500_PER4_BASE + 0x0f000) +#define U8500_PRCMU_TCDM_BASE_V1 (U8500_PER4_BASE + 0x0f000) +#define U8500_PRCMU_TCDM_BASE (U8500_PER4_BASE + 0x68000) /* per3 base addresses */ #define U8500_FSMC_BASE (U8500_PER3_BASE + 0x0000) diff --git a/arch/arm/mach-ux500/include/mach/prcmu.h b/arch/arm/mach-ux500/include/mach/prcmu.h index 549843ff6db..daa9d3ab7e0 100644 --- a/arch/arm/mach-ux500/include/mach/prcmu.h +++ b/arch/arm/mach-ux500/include/mach/prcmu.h @@ -9,6 +9,7 @@ #ifndef __MACH_PRCMU_H #define __MACH_PRCMU_H +void __init prcmu_early_init(void); int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size); diff --git a/arch/arm/mach-ux500/prcmu.c b/arch/arm/mach-ux500/prcmu.c index 293274d1342..3ba3e3298b8 100644 --- a/arch/arm/mach-ux500/prcmu.c +++ b/arch/arm/mach-ux500/prcmu.c @@ -20,10 +20,11 @@ #include <mach/hardware.h> #include <mach/prcmu-regs.h> -#define PRCMU_TCDM_BASE __io_address(U8500_PRCMU_TCDM_BASE) +/* Global var to runtime determine TCDM base for v2 or v1 */ +static __iomem void *tcdm_base; -#define REQ_MB5 (PRCMU_TCDM_BASE + 0xE44) -#define ACK_MB5 (PRCMU_TCDM_BASE + 0xDF4) +#define REQ_MB5 (tcdm_base + 0xE44) +#define ACK_MB5 (tcdm_base + 0xDF4) #define REQ_MB5_I2C_SLAVE_OP (REQ_MB5) #define REQ_MB5_I2C_HW_BITS (REQ_MB5 + 1) @@ -33,8 +34,10 @@ #define ACK_MB5_I2C_STATUS (ACK_MB5 + 1) #define ACK_MB5_I2C_VAL (ACK_MB5 + 3) -#define I2C_WRITE(slave) ((slave) << 1) -#define I2C_READ(slave) (((slave) << 1) | BIT(0)) +#define I2C_WRITE(slave) \ + (((slave) << 1) | (cpu_is_u8500v2() ? BIT(6) : 0)) +#define I2C_READ(slave) \ + (((slave) << 1) | (cpu_is_u8500v2() ? BIT(6) : 0) | BIT(0)) #define I2C_STOP_EN BIT(3) enum ack_mb5_status { @@ -217,6 +220,18 @@ static irqreturn_t prcmu_irq_handler(int irq, void *data) return IRQ_HANDLED; } +void __init prcmu_early_init(void) +{ + if (cpu_is_u8500v11() || cpu_is_u8500ed()) { + tcdm_base = __io_address(U8500_PRCMU_TCDM_BASE_V1); + } else if (cpu_is_u8500v2()) { + tcdm_base = __io_address(U8500_PRCMU_TCDM_BASE); + } else { + pr_err("prcmu: Unsupported chip version\n"); + BUG(); + } +} + static int __init prcmu_init(void) { mutex_init(&mb5_transfer.lock); |