diff options
Diffstat (limited to 'arch')
97 files changed, 440 insertions, 440 deletions
diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig index b5ac644e12a..6b31cb60daa 100644 --- a/arch/arm/configs/imx_v4_v5_defconfig +++ b/arch/arm/configs/imx_v4_v5_defconfig @@ -112,6 +112,7 @@ CONFIG_WATCHDOG=y CONFIG_IMX2_WDT=y CONFIG_MFD_MC13XXX=y CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_MC13783=y CONFIG_REGULATOR_MC13892=y CONFIG_FB=y diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index 889d73ac1ae..7e84f453e8a 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -8,8 +8,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_LBDAF is not set # CONFIG_BLK_DEV_BSG is not set CONFIG_ARCH_U8500=y -CONFIG_UX500_SOC_DB5500=y -CONFIG_UX500_SOC_DB8500=y CONFIG_MACH_HREFV60=y CONFIG_MACH_SNOWBALL=y CONFIG_MACH_U5500=y @@ -39,7 +37,6 @@ CONFIG_CAIF=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=65536 -CONFIG_MISC_DEVICES=y CONFIG_AB8500_PWM=y CONFIG_SENSORS_BH1780=y CONFIG_NETDEVICES=y @@ -65,16 +62,18 @@ CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y CONFIG_HW_RANDOM=y CONFIG_HW_RANDOM_NOMADIK=y -CONFIG_I2C=y -CONFIG_I2C_NOMADIK=y CONFIG_SPI=y CONFIG_SPI_PL022=y CONFIG_GPIO_STMPE=y CONFIG_GPIO_TC3589X=y +CONFIG_POWER_SUPPLY=y +CONFIG_AB8500_BM=y +CONFIG_AB8500_BATTERY_THERM_ON_BATCTRL=y CONFIG_MFD_STMPE=y CONFIG_MFD_TC3589X=y CONFIG_AB5500_CORE=y CONFIG_AB8500_CORE=y +CONFIG_REGULATOR=y CONFIG_REGULATOR_AB8500=y # CONFIG_HID_SUPPORT is not set CONFIG_USB_GADGET=y diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index 5b150afb995..fef42b21cec 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -118,14 +118,10 @@ static int twd_cpufreq_transition(struct notifier_block *nb, * The twd clock events must be reprogrammed to account for the new * frequency. The timer is local to a cpu, so cross-call to the * changing cpu. - * - * Only wait for it to finish, if the cpu is active to avoid - * deadlock when cpu1 is spinning on while(!cpu_active(cpu1)) during - * booting of that cpu. */ if (state == CPUFREQ_POSTCHANGE || state == CPUFREQ_RESUMECHANGE) smp_call_function_single(freqs->cpu, twd_update_frequency, - NULL, cpu_active(freqs->cpu)); + NULL, 1); return NOTIFY_OK; } diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index 99ce5c955e3..05774e5b1cb 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -1173,7 +1173,6 @@ void __init at91_add_device_serial(void) printk(KERN_INFO "AT91: No default serial console defined.\n"); } #else -void __init __deprecated at91_init_serial(struct at91_uart_config *config) {} void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} void __init at91_set_serial_console(unsigned portnr) {} void __init at91_add_device_serial(void) {} diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c index dd7f782b0b9..104ca40d8d1 100644 --- a/arch/arm/mach-at91/at91rm9200_time.c +++ b/arch/arm/mach-at91/at91rm9200_time.c @@ -23,6 +23,7 @@ #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/clockchips.h> +#include <linux/export.h> #include <asm/mach/time.h> @@ -176,6 +177,7 @@ static struct clock_event_device clkevt = { }; void __iomem *at91_st_base; +EXPORT_SYMBOL_GPL(at91_st_base); void __init at91rm9200_ioremap_st(u32 addr) { diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c index 11cbaa8946f..b2e4fe21f34 100644 --- a/arch/arm/mach-at91/board-rm9200ek.c +++ b/arch/arm/mach-at91/board-rm9200ek.c @@ -117,7 +117,7 @@ static struct i2c_board_info __initdata ek_i2c_devices[] = { }; #define EK_FLASH_BASE AT91_CHIPSELECT_0 -#define EK_FLASH_SIZE SZ_2M +#define EK_FLASH_SIZE SZ_8M static struct physmap_flash_data ek_flash_data = { .width = 2, diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index c3f99446286..065fed34242 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -85,8 +85,6 @@ static struct resource dm9000_resource[] = { .flags = IORESOURCE_MEM }, [2] = { - .start = AT91_PIN_PC11, - .end = AT91_PIN_PC11, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE | IORESOURCE_IRQ_HIGHEDGE, } @@ -130,6 +128,8 @@ static struct sam9_smc_config __initdata dm9000_smc_config = { static void __init ek_add_device_dm9000(void) { + struct resource *r = &dm9000_resource[2]; + /* Configure chip-select 2 (DM9000) */ sam9_smc_configure(0, 2, &dm9000_smc_config); @@ -139,6 +139,7 @@ static void __init ek_add_device_dm9000(void) /* Configure Interrupt pin as input, no pull-up */ at91_set_gpio_input(AT91_PIN_PC11, 0); + r->start = r->end = gpio_to_irq(AT91_PIN_PC11); platform_device_register(&dm9000_device); } #else diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c index a0f4d7424cd..6b692824c98 100644 --- a/arch/arm/mach-at91/clock.c +++ b/arch/arm/mach-at91/clock.c @@ -35,6 +35,7 @@ #include "generic.h" void __iomem *at91_pmc_base; +EXPORT_SYMBOL_GPL(at91_pmc_base); /* * There's a lot more which can be done with clocks, including cpufreq diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h index 36604782a78..ea2c57a86ca 100644 --- a/arch/arm/mach-at91/include/mach/at91_pmc.h +++ b/arch/arm/mach-at91/include/mach/at91_pmc.h @@ -25,7 +25,7 @@ extern void __iomem *at91_pmc_base; #define at91_pmc_write(field, value) \ __raw_writel(value, at91_pmc_base + field) #else -.extern at91_aic_base +.extern at91_pmc_base #endif #define AT91_PMC_SCER 0x00 /* System Clock Enable Register */ diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c index 97cc04dc807..f44a2e7272e 100644 --- a/arch/arm/mach-at91/setup.c +++ b/arch/arm/mach-at91/setup.c @@ -54,6 +54,7 @@ void __init at91_init_interrupts(unsigned int *priority) } void __iomem *at91_ramc_base[2]; +EXPORT_SYMBOL_GPL(at91_ramc_base); void __init at91_ioremap_ramc(int id, u32 addr, u32 size) { @@ -292,6 +293,7 @@ void __init at91_ioremap_rstc(u32 base_addr) } void __iomem *at91_matrix_base; +EXPORT_SYMBOL_GPL(at91_matrix_base); void __init at91_ioremap_matrix(u32 base_addr) { diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c index 22e4e0a28ad..adbfb199458 100644 --- a/arch/arm/mach-bcmring/core.c +++ b/arch/arm/mach-bcmring/core.c @@ -52,8 +52,8 @@ #include <mach/csp/chipcHw_inline.h> #include <mach/csp/tmrHw_reg.h> -static AMBA_APB_DEVICE(uartA, "uarta", MM_ADDR_IO_UARTA, { IRQ_UARTA }, NULL); -static AMBA_APB_DEVICE(uartB, "uartb", MM_ADDR_IO_UARTB, { IRQ_UARTB }, NULL); +static AMBA_APB_DEVICE(uartA, "uartA", 0, MM_ADDR_IO_UARTA, {IRQ_UARTA}, NULL); +static AMBA_APB_DEVICE(uartB, "uartB", 0, MM_ADDR_IO_UARTB, {IRQ_UARTB}, NULL); static struct clk pll1_clk = { .name = "PLL1", diff --git a/arch/arm/mach-imx/imx27-dt.c b/arch/arm/mach-imx/imx27-dt.c index 861ceb8232d..ed38d03c61f 100644 --- a/arch/arm/mach-imx/imx27-dt.c +++ b/arch/arm/mach-imx/imx27-dt.c @@ -35,7 +35,7 @@ static const struct of_dev_auxdata imx27_auxdata_lookup[] __initconst = { static int __init imx27_avic_add_irq_domain(struct device_node *np, struct device_node *interrupt_parent) { - irq_domain_add_simple(np, 0); + irq_domain_add_legacy(np, 64, 0, 0, &irq_domain_simple_ops, NULL); return 0; } @@ -44,7 +44,9 @@ static int __init imx27_gpio_add_irq_domain(struct device_node *np, { static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS; - irq_domain_add_simple(np, gpio_irq_base); + gpio_irq_base -= 32; + irq_domain_add_legacy(np, 32, gpio_irq_base, 0, &irq_domain_simple_ops, + NULL); return 0; } diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c index 05250aed61f..e10f3914fcf 100644 --- a/arch/arm/mach-imx/mm-imx5.c +++ b/arch/arm/mach-imx/mm-imx5.c @@ -35,7 +35,7 @@ static void imx5_idle(void) } clk_enable(gpc_dvfs_clk); mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF); - if (tzic_enable_wake() != 0) + if (!tzic_enable_wake()) cpu_do_idle(); clk_disable(gpc_dvfs_clk); } diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c index 087dba0df47..e9cc52d4cb2 100644 --- a/arch/arm/mach-omap1/mux.c +++ b/arch/arm/mach-omap1/mux.c @@ -27,6 +27,7 @@ #include <linux/io.h> #include <linux/spinlock.h> +#include <mach/hardware.h> #include <plat/mux.h> diff --git a/arch/arm/mach-omap1/timer.c b/arch/arm/mach-omap1/timer.c index 6e90665a7c4..fb202af01d0 100644 --- a/arch/arm/mach-omap1/timer.c +++ b/arch/arm/mach-omap1/timer.c @@ -47,9 +47,9 @@ static int omap1_dm_timer_set_src(struct platform_device *pdev, int n = (pdev->id - 1) << 1; u32 l; - l = __raw_readl(MOD_CONF_CTRL_1) & ~(0x03 << n); + l = omap_readl(MOD_CONF_CTRL_1) & ~(0x03 << n); l |= source << n; - __raw_writel(l, MOD_CONF_CTRL_1); + omap_writel(l, MOD_CONF_CTRL_1); return 0; } diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index a39fc4bbd2b..130ab00c09a 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -20,6 +20,7 @@ #include <linux/usb/otg.h> #include <linux/spi/spi.h> #include <linux/i2c/twl.h> +#include <linux/mfd/twl6040.h> #include <linux/gpio_keys.h> #include <linux/regulator/machine.h> #include <linux/regulator/fixed.h> @@ -560,7 +561,7 @@ static struct regulator_init_data sdp4430_vusim = { }, }; -static struct twl4030_codec_data twl6040_codec = { +static struct twl6040_codec_data twl6040_codec = { /* single-step ramp for headset and handsfree */ .hs_left_step = 0x0f, .hs_right_step = 0x0f, @@ -568,7 +569,7 @@ static struct twl4030_codec_data twl6040_codec = { .hf_right_step = 0x1d, }; -static struct twl4030_vibra_data twl6040_vibra = { +static struct twl6040_vibra_data twl6040_vibra = { .vibldrv_res = 8, .vibrdrv_res = 3, .viblmotor_res = 10, @@ -577,16 +578,14 @@ static struct twl4030_vibra_data twl6040_vibra = { .vddvibr_uV = 0, /* fixed volt supply - VBAT */ }; -static struct twl4030_audio_data twl6040_audio = { +static struct twl6040_platform_data twl6040_data = { .codec = &twl6040_codec, .vibra = &twl6040_vibra, .audpwron_gpio = 127, - .naudint_irq = OMAP44XX_IRQ_SYS_2N, .irq_base = TWL6040_CODEC_IRQ_BASE, }; static struct twl4030_platform_data sdp4430_twldata = { - .audio = &twl6040_audio, /* Regulators */ .vusim = &sdp4430_vusim, .vaux1 = &sdp4430_vaux1, @@ -617,7 +616,8 @@ static int __init omap4_i2c_init(void) TWL_COMMON_REGULATOR_VCXIO | TWL_COMMON_REGULATOR_VUSB | TWL_COMMON_REGULATOR_CLK32KG); - omap4_pmic_init("twl6030", &sdp4430_twldata); + omap4_pmic_init("twl6030", &sdp4430_twldata, + &twl6040_data, OMAP44XX_IRQ_SYS_2N); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, sdp4430_i2c_3_boardinfo, ARRAY_SIZE(sdp4430_i2c_3_boardinfo)); diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 74e1687b517..098d183a008 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -137,7 +137,7 @@ static struct twl4030_platform_data sdp4430_twldata = { static void __init omap4_i2c_init(void) { - omap4_pmic_init("twl6030", &sdp4430_twldata); + omap4_pmic_init("twl6030", &sdp4430_twldata, NULL, 0); } static void __init omap4_init(void) diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index d8c0e89f012..1b782ba5343 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -25,6 +25,7 @@ #include <linux/gpio.h> #include <linux/usb/otg.h> #include <linux/i2c/twl.h> +#include <linux/mfd/twl6040.h> #include <linux/regulator/machine.h> #include <linux/regulator/fixed.h> #include <linux/wl12xx.h> @@ -284,7 +285,7 @@ static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers) return 0; } -static struct twl4030_codec_data twl6040_codec = { +static struct twl6040_codec_data twl6040_codec = { /* single-step ramp for headset and handsfree */ .hs_left_step = 0x0f, .hs_right_step = 0x0f, @@ -292,17 +293,14 @@ static struct twl4030_codec_data twl6040_codec = { .hf_right_step = 0x1d, }; -static struct twl4030_audio_data twl6040_audio = { +static struct twl6040_platform_data twl6040_data = { .codec = &twl6040_codec, .audpwron_gpio = 127, - .naudint_irq = OMAP44XX_IRQ_SYS_2N, .irq_base = TWL6040_CODEC_IRQ_BASE, }; /* Panda board uses the common PMIC configuration */ -static struct twl4030_platform_data omap4_panda_twldata = { - .audio = &twl6040_audio, -}; +static struct twl4030_platform_data omap4_panda_twldata; /* * Display monitor features are burnt in their EEPROM as EDID data. The EEPROM @@ -326,7 +324,8 @@ static int __init omap4_panda_i2c_init(void) TWL_COMMON_REGULATOR_VCXIO | TWL_COMMON_REGULATOR_VUSB | TWL_COMMON_REGULATOR_CLK32KG); - omap4_pmic_init("twl6030", &omap4_panda_twldata); + omap4_pmic_init("twl6030", &omap4_panda_twldata, + &twl6040_data, OMAP44XX_IRQ_SYS_2N); omap_register_i2c_bus(2, 400, NULL, 0); /* * Bus 3 is attached to the DVI port where devices like the pico DLP diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 2c27fdb61e6..7144ae651d3 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1422,6 +1422,9 @@ static int _ocp_softreset(struct omap_hwmod *oh) goto dis_opt_clks; _write_sysconfig(v, oh); + if (oh->class->sysc->srst_udelay) + udelay(oh->class->sysc->srst_udelay); + if (oh->class->sysc->sysc_flags & SYSS_HAS_RESET_STATUS) omap_test_timeout((omap_hwmod_read(oh, oh->class->sysc->syss_offs) @@ -1903,10 +1906,20 @@ void omap_hwmod_write(u32 v, struct omap_hwmod *oh, u16 reg_offs) */ int omap_hwmod_softreset(struct omap_hwmod *oh) { - if (!oh) + u32 v; + int ret; + + if (!oh || !(oh->_sysc_cache)) return -EINVAL; - return _ocp_softreset(oh); + v = oh->_sysc_cache; + ret = _set_softreset(oh, &v); + if (ret) + goto error; + _write_sysconfig(v, oh); + +error: + return ret; } /** diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index a5409ce3f32..a6bde34e443 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -1000,7 +1000,6 @@ static struct omap_hwmod_ocp_if omap2420_l4_core__dss_venc = { .flags = OMAP_FIREWALL_L4, } }, - .flags = OCPIF_SWSUP_IDLE, .user = OCP_USER_MPU | OCP_USER_SDMA, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index c4f56cb60d7..04a3885f447 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -1049,7 +1049,6 @@ static struct omap_hwmod_ocp_if omap2430_l4_core__dss_venc = { .slave = &omap2430_dss_venc_hwmod, .clk = "dss_ick", .addr = omap2_dss_venc_addrs, - .flags = OCPIF_SWSUP_IDLE, .user = OCP_USER_MPU | OCP_USER_SDMA, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 34b9766d1d2..db86ce90c69 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -1676,7 +1676,6 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_venc = { .flags = OMAP_FIREWALL_L4, } }, - .flags = OCPIF_SWSUP_IDLE, .user = OCP_USER_MPU | OCP_USER_SDMA, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index cc9bd106a85..6abc75753e4 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -2594,6 +2594,15 @@ static struct omap_hwmod omap44xx_ipu_hwmod = { static struct omap_hwmod_class_sysconfig omap44xx_iss_sysc = { .rev_offs = 0x0000, .sysc_offs = 0x0010, + /* + * ISS needs 100 OCP clk cycles delay after a softreset before + * accessing sysconfig again. + * The lowest frequency at the moment for L3 bus is 100 MHz, so + * 1usec delay is needed. Add an x2 margin to be safe (2 usecs). + * + * TODO: Indicate errata when available. + */ + .srst_udelay = 2, .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET), .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 0cdd359a128..9fc2f44188c 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -108,8 +108,14 @@ static void omap_uart_set_noidle(struct platform_device *pdev) static void omap_uart_set_smartidle(struct platform_device *pdev) { struct omap_device *od = to_omap_device(pdev); + u8 idlemode; - omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_SMART); + if (od->hwmods[0]->class->sysc->idlemodes & SIDLE_SMART_WKUP) + idlemode = HWMOD_IDLEMODE_SMART_WKUP; + else + idlemode = HWMOD_IDLEMODE_SMART; + + omap_hwmod_set_slave_idlemode(od->hwmods[0], idlemode); } #else @@ -120,124 +126,8 @@ static void omap_uart_set_smartidle(struct platform_device *pdev) {} #endif /* CONFIG_PM */ #ifdef CONFIG_OMAP_MUX -static struct omap_device_pad default_uart1_pads[] __initdata = { - { - .name = "uart1_cts.uart1_cts", - .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, - }, - { - .name = "uart1_rts.uart1_rts", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "uart1_tx.uart1_tx", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "uart1_rx.uart1_rx", - .flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP, - .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, - .idle = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, - }, -}; - -static struct omap_device_pad default_uart2_pads[] __initdata = { - { - .name = "uart2_cts.uart2_cts", - .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, - }, - { - .name = "uart2_rts.uart2_rts", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "uart2_tx.uart2_tx", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "uart2_rx.uart2_rx", - .flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP, - .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, - .idle = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, - }, -}; - -static struct omap_device_pad default_uart3_pads[] __initdata = { - { - .name = "uart3_cts_rctx.uart3_cts_rctx", - .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, - }, - { - .name = "uart3_rts_sd.uart3_rts_sd", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "uart3_tx_irtx.uart3_tx_irtx", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "uart3_rx_irrx.uart3_rx_irrx", - .flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP, - .enable = OMAP_PIN_INPUT | OMAP_MUX_MODE0, - .idle = OMAP_PIN_INPUT | OMAP_MUX_MODE0, - }, -}; - -static struct omap_device_pad default_omap36xx_uart4_pads[] __initdata = { - { - .name = "gpmc_wait2.uart4_tx", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "gpmc_wait3.uart4_rx", - .flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP, - .enable = OMAP_PIN_INPUT | OMAP_MUX_MODE2, - .idle = OMAP_PIN_INPUT | OMAP_MUX_MODE2, - }, -}; - -static struct omap_device_pad default_omap4_uart4_pads[] __initdata = { - { - .name = "uart4_tx.uart4_tx", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "uart4_rx.uart4_rx", - .flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP, - .enable = OMAP_PIN_INPUT | OMAP_MUX_MODE0, - .idle = OMAP_PIN_INPUT | OMAP_MUX_MODE0, - }, -}; - static void omap_serial_fill_default_pads(struct omap_board_data *bdata) { - switch (bdata->id) { - case 0: - bdata->pads = default_uart1_pads; - bdata->pads_cnt = ARRAY_SIZE(default_uart1_pads); - break; - case 1: - bdata->pads = default_uart2_pads; - bdata->pads_cnt = ARRAY_SIZE(default_uart2_pads); - break; - case 2: - bdata->pads = default_uart3_pads; - bdata->pads_cnt = ARRAY_SIZE(default_uart3_pads); - break; - case 3: - if (cpu_is_omap44xx()) { - bdata->pads = default_omap4_uart4_pads; - bdata->pads_cnt = - ARRAY_SIZE(default_omap4_uart4_pads); - } else if (cpu_is_omap3630()) { - bdata->pads = default_omap36xx_uart4_pads; - bdata->pads_cnt = - ARRAY_SIZE(default_omap36xx_uart4_pads); - } - break; - default: - break; - } } #else static void omap_serial_fill_default_pads(struct omap_board_data *bdata) {} diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index 4b57757bf9d..7a7b89304c4 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -37,6 +37,16 @@ static struct i2c_board_info __initdata pmic_i2c_board_info = { .flags = I2C_CLIENT_WAKE, }; +static struct i2c_board_info __initdata omap4_i2c1_board_info[] = { + { + .addr = 0x48, + .flags = I2C_CLIENT_WAKE, + }, + { + I2C_BOARD_INFO("twl6040", 0x4b), + }, +}; + void __init omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq, struct twl4030_platform_data *pmic_data) @@ -49,14 +59,31 @@ void __init omap_pmic_init(int bus, u32 clkrate, omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1); } +void __init omap4_pmic_init(const char *pmic_type, + struct twl4030_platform_data *pmic_data, + struct twl6040_platform_data *twl6040_data, int twl6040_irq) +{ + /* PMIC part*/ + strncpy(omap4_i2c1_board_info[0].type, pmic_type, + sizeof(omap4_i2c1_board_info[0].type)); + omap4_i2c1_board_info[0].irq = OMAP44XX_IRQ_SYS_1N; + omap4_i2c1_board_info[0].platform_data = pmic_data; + + /* TWL6040 audio IC part */ + omap4_i2c1_board_info[1].irq = twl6040_irq; + omap4_i2c1_board_info[1].platform_data = twl6040_data; + + omap_register_i2c_bus(1, 400, omap4_i2c1_board_info, 2); + +} + void __init omap_pmic_late_init(void) { /* Init the OMAP TWL parameters (if PMIC has been registerd) */ - if (!pmic_i2c_board_info.irq) - return; - - omap3_twl_init(); - omap4_twl_init(); + if (pmic_i2c_board_info.irq) + omap3_twl_init(); + if (omap4_i2c1_board_info[0].irq) + omap4_twl_init(); } #if defined(CONFIG_ARCH_OMAP3) diff --git a/arch/arm/mach-omap2/twl-common.h b/arch/arm/mach-omap2/twl-common.h index 275dde8cb27..09627483a57 100644 --- a/arch/arm/mach-omap2/twl-common.h +++ b/arch/arm/mach-omap2/twl-common.h @@ -29,6 +29,7 @@ struct twl4030_platform_data; +struct twl6040_platform_data; void omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq, struct twl4030_platform_data *pmic_data); @@ -46,12 +47,9 @@ static inline void omap3_pmic_init(const char *pmic_type, omap_pmic_init(1, 2600, pmic_type, INT_34XX_SYS_NIRQ, pmic_data); } -static inline void omap4_pmic_init(const char *pmic_type, - struct twl4030_platform_data *pmic_data) -{ - /* Phoenix Audio IC needs I2C1 to start with 400 KHz or less */ - omap_pmic_init(1, 400, pmic_type, OMAP44XX_IRQ_SYS_1N, pmic_data); -} +void omap4_pmic_init(const char *pmic_type, + struct twl4030_platform_data *pmic_data, + struct twl6040_platform_data *audio_data, int twl6040_irq); void omap3_pmic_get_config(struct twl4030_platform_data *pmic_data, u32 pdata_flags, u32 regulators_flags); diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index 880d02ec89d..ef7099eea0f 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -17,6 +17,7 @@ config UX500_SOC_DB5500 config UX500_SOC_DB8500 bool select MFD_DB8500_PRCMU + select REGULATOR select REGULATOR_DB8500_PRCMU select CPU_FREQ_TABLE if CPU_FREQ diff --git a/arch/arm/mach-ux500/mbox-db5500.c b/arch/arm/mach-ux500/mbox-db5500.c index 2b2d51caf9d..0127490218c 100644 --- a/arch/arm/mach-ux500/mbox-db5500.c +++ b/arch/arm/mach-ux500/mbox-db5500.c @@ -168,7 +168,7 @@ static ssize_t mbox_read_fifo(struct device *dev, return sprintf(buf, "0x%X\n", mbox_value); } -static DEVICE_ATTR(fifo, S_IWUGO | S_IRUGO, mbox_read_fifo, mbox_write_fifo); +static DEVICE_ATTR(fifo, S_IWUSR | S_IRUGO, mbox_read_fifo, mbox_write_fifo); static int mbox_show(struct seq_file *s, void *data) { diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c index d2058ef8345..eff5842f623 100644 --- a/arch/arm/mach-ux500/platsmp.c +++ b/arch/arm/mach-ux500/platsmp.c @@ -99,7 +99,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) */ write_pen_release(cpu_logical_map(cpu)); - gic_raise_softirq(cpumask_of(cpu), 1); + smp_send_reschedule(cpu); timeout = jiffies + (1 * HZ); while (time_before(jiffies, timeout)) { diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h index 8070145ccb9..3f26db4ee8e 100644 --- a/arch/arm/plat-omap/include/plat/omap_hwmod.h +++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h @@ -305,6 +305,7 @@ struct omap_hwmod_sysc_fields { * @rev_offs: IP block revision register offset (from module base addr) * @sysc_offs: OCP_SYSCONFIG register offset (from module base addr) * @syss_offs: OCP_SYSSTATUS register offset (from module base addr) + * @srst_udelay: Delay needed after doing a softreset in usecs * @idlemodes: One or more of {SIDLE,MSTANDBY}_{OFF,FORCE,SMART} * @sysc_flags: SYS{C,S}_HAS* flags indicating SYSCONFIG bits supported * @clockact: the default value of the module CLOCKACTIVITY bits @@ -330,9 +331,10 @@ struct omap_hwmod_class_sysconfig { u16 sysc_offs; u16 syss_offs; u16 sysc_flags; + struct omap_hwmod_sysc_fields *sysc_fields; + u8 srst_udelay; u8 idlemodes; u8 clockact; - struct omap_hwmod_sysc_fields *sysc_fields; }; /** diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index eec98afa0f8..f9a8c5341ee 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -348,7 +348,6 @@ u32 omap3_configure_core_dpll(u32 m2, u32 unlock_dll, u32 f, u32 inc, sdrc_actim_ctrl_b_1, sdrc_mr_1); } -#ifdef CONFIG_PM void omap3_sram_restore_context(void) { omap_sram_ceil = omap_sram_base + omap_sram_size; @@ -358,17 +357,18 @@ void omap3_sram_restore_context(void) omap3_sram_configure_core_dpll_sz); omap_push_sram_idle(); } -#endif /* CONFIG_PM */ - -#endif /* CONFIG_ARCH_OMAP3 */ static inline int omap34xx_sram_init(void) { -#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM) omap3_sram_restore_context(); -#endif return 0; } +#else +static inline int omap34xx_sram_init(void) +{ + return 0; +} +#endif /* CONFIG_ARCH_OMAP3 */ static inline int am33xx_sram_init(void) { diff --git a/arch/blackfin/mach-bf538/boards/ezkit.c b/arch/blackfin/mach-bf538/boards/ezkit.c index 1633a6f306c..85038f54354 100644 --- a/arch/blackfin/mach-bf538/boards/ezkit.c +++ b/arch/blackfin/mach-bf538/boards/ezkit.c @@ -38,7 +38,7 @@ static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, }; -#endif +#endif /* CONFIG_RTC_DRV_BFIN */ #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) #ifdef CONFIG_SERIAL_BFIN_UART0 @@ -100,7 +100,7 @@ static struct platform_device bfin_uart0_device = { .platform_data = &bfin_uart0_peripherals, /* Passed to driver */ }, }; -#endif +#endif /* CONFIG_SERIAL_BFIN_UART0 */ #ifdef CONFIG_SERIAL_BFIN_UART1 static struct resource bfin_uart1_resources[] = { { @@ -148,7 +148,7 @@ static struct platform_device bfin_uart1_device = { .platform_data = &bfin_uart1_peripherals, /* Passed to driver */ }, }; -#endif +#endif /* CONFIG_SERIAL_BFIN_UART1 */ #ifdef CONFIG_SERIAL_BFIN_UART2 static struct resource bfin_uart2_resources[] = { { @@ -196,8 +196,8 @@ static struct platform_device bfin_uart2_device = { .platform_data = &bfin_uart2_peripherals, /* Passed to driver */ }, }; -#endif -#endif +#endif /* CONFIG_SERIAL_BFIN_UART2 */ +#endif /* CONFIG_SERIAL_BFIN */ #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) #ifdef CONFIG_BFIN_SIR0 @@ -224,7 +224,7 @@ static struct platform_device bfin_sir0_device = { .num_resources = ARRAY_SIZE(bfin_sir0_resources), .resource = bfin_sir0_resources, }; -#endif +#endif /* CONFIG_BFIN_SIR0 */ #ifdef CONFIG_BFIN_SIR1 static struct resource bfin_sir1_resources[] = { { @@ -249,7 +249,7 @@ static struct platform_device bfin_sir1_device = { .num_resources = ARRAY_SIZE(bfin_sir1_resources), .resource = bfin_sir1_resources, }; -#endif +#endif /* CONFIG_BFIN_SIR1 */ #ifdef CONFIG_BFIN_SIR2 static struct resource bfin_sir2_resources[] = { { @@ -274,8 +274,8 @@ static struct platform_device bfin_sir2_device = { .num_resources = ARRAY_SIZE(bfin_sir2_resources), .resource = bfin_sir2_resources, }; -#endif -#endif +#endif /* CONFIG_BFIN_SIR2 */ +#endif /* CONFIG_BFIN_SIR */ #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART @@ -311,7 +311,7 @@ static struct platform_device bfin_sport0_uart_device = { .platform_data = &bfin_sport0_peripherals, /* Passed to driver */ }, }; -#endif +#endif /* CONFIG_SERIAL_BFIN_SPORT0_UART */ #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART static struct resource bfin_sport1_uart_resources[] = { { @@ -345,7 +345,7 @@ static struct platform_device bfin_sport1_uart_device = { .platform_data = &bfin_sport1_peripherals, /* Passed to driver */ }, }; -#endif +#endif /* CONFIG_SERIAL_BFIN_SPORT1_UART */ #ifdef CONFIG_SERIAL_BFIN_SPORT2_UART static struct resource bfin_sport2_uart_resources[] = { { @@ -379,7 +379,7 @@ static struct platform_device bfin_sport2_uart_device = { .platform_data = &bfin_sport2_peripherals, /* Passed to driver */ }, }; -#endif +#endif /* CONFIG_SERIAL_BFIN_SPORT2_UART */ #ifdef CONFIG_SERIAL_BFIN_SPORT3_UART static struct resource bfin_sport3_uart_resources[] = { { @@ -413,8 +413,8 @@ static struct platform_device bfin_sport3_uart_device = { .platform_data = &bfin_sport3_peripherals, /* Passed to driver */ }, }; -#endif -#endif +#endif /* CONFIG_SERIAL_BFIN_SPORT3_UART */ +#endif /* CONFIG_SERIAL_BFIN_SPORT */ #if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE) static unsigned short bfin_can_peripherals[] = { @@ -452,7 +452,7 @@ static struct platform_device bfin_can_device = { .platform_data = &bfin_can_peripherals, /* Passed to driver */ }, }; -#endif +#endif /* CONFIG_CAN_BFIN */ /* * USB-LAN EzExtender board @@ -488,7 +488,7 @@ static struct platform_device smc91x_device = { .platform_data = &smc91x_info, }, }; -#endif +#endif /* CONFIG_SMC91X */ #if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) /* all SPI peripherals info goes here */ @@ -518,7 +518,8 @@ static struct flash_platform_data bfin_spi_flash_data = { static struct bfin5xx_spi_chip spi_flash_chip_info = { .enable_dma = 0, /* use dma transfer with this chip*/ }; -#endif +#endif /* CONFIG_MTD_M25P80 */ +#endif /* CONFIG_SPI_BFIN5XX */ #if defined(CONFIG_TOUCHSCREEN_AD7879) || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE) #include <linux/spi/ad7879.h> @@ -535,7 +536,7 @@ static const struct ad7879_platform_data bfin_ad7879_ts_info = { .gpio_export = 1, /* Export GPIO to gpiolib */ .gpio_base = -1, /* Dynamic allocation */ }; -#endif +#endif /* CONFIG_TOUCHSCREEN_AD7879 */ #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) #include <asm/bfin-lq035q1.h> @@ -564,7 +565,7 @@ static struct platform_device bfin_lq035q1_device = { .platform_data = &bfin_lq035q1_data, }, }; -#endif +#endif /* CONFIG_FB_BFIN_LQ035Q1 */ static struct spi_board_info bf538_spi_board_info[] __initdata = { #if defined(CONFIG_MTD_M25P80) \ @@ -579,7 +580,7 @@ static struct spi_board_info bf538_spi_board_info[] __initdata = { .controller_data = &spi_flash_chip_info, .mode = SPI_MODE_3, }, -#endif +#endif /* CONFIG_MTD_M25P80 */ #if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE) { .modalias = "ad7879", @@ -590,7 +591,7 @@ static struct spi_board_info bf538_spi_board_info[] __initdata = { .chip_select = 1, .mode = SPI_CPHA | SPI_CPOL, }, -#endif +#endif /* CONFIG_TOUCHSCREEN_AD7879_SPI */ #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) { .modalias = "bfin-lq035q1-spi", @@ -599,7 +600,7 @@ static struct spi_board_info bf538_spi_board_info[] __initdata = { .chip_select = 2, .mode = SPI_CPHA | SPI_CPOL, }, -#endif +#endif /* CONFIG_FB_BFIN_LQ035Q1 */ #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) { .modalias = "spidev", @@ -607,7 +608,7 @@ static struct spi_board_info bf538_spi_board_info[] __initdata = { .bus_num = 0, .chip_select = 1, }, -#endif +#endif /* CONFIG_SPI_SPIDEV */ }; /* SPI (0) */ @@ -716,8 +717,6 @@ static struct platform_device bf538_spi_master2 = { }, }; -#endif /* spi master and devices */ - #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) static struct resource bfin_twi0_resource[] = { [0] = { @@ -759,8 +758,8 @@ static struct platform_device i2c_bfin_twi1_device = { .num_resources = ARRAY_SIZE(bfin_twi1_resource), .resource = bfin_twi1_resource, }; -#endif -#endif +#endif /* CONFIG_BF542 */ +#endif /* CONFIG_I2C_BLACKFIN_TWI */ #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) #include <linux/gpio_keys.h> diff --git a/arch/hexagon/kernel/dma.c b/arch/hexagon/kernel/dma.c index 37302218ca4..0f2367cc549 100644 --- a/arch/hexagon/kernel/dma.c +++ b/arch/hexagon/kernel/dma.c @@ -22,6 +22,7 @@ #include <linux/bootmem.h> #include <linux/genalloc.h> #include <asm/dma-mapping.h> +#include <linux/module.h> struct dma_map_ops *dma_ops; EXPORT_SYMBOL(dma_ops); diff --git a/arch/hexagon/kernel/process.c b/arch/hexagon/kernel/process.c index 18c4f0b0f4b..ff02821bfb7 100644 --- a/arch/hexagon/kernel/process.c +++ b/arch/hexagon/kernel/process.c @@ -1,7 +1,7 @@ /* * Process creation support for Hexagon * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2012, Code Aurora Forum. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and @@ -88,7 +88,7 @@ void (*idle_sleep)(void) = default_idle; void cpu_idle(void) { while (1) { - tick_nohz_stop_sched_tick(1); + tick_nohz_idle_enter(); local_irq_disable(); while (!need_resched()) { idle_sleep(); @@ -97,7 +97,7 @@ void cpu_idle(void) local_irq_disable(); } local_irq_enable(); - tick_nohz_restart_sched_tick(); + tick_nohz_idle_exit(); schedule(); } } diff --git a/arch/hexagon/kernel/ptrace.c b/arch/hexagon/kernel/ptrace.c index 32342de1a79..96c3b2c4dba 100644 --- a/arch/hexagon/kernel/ptrace.c +++ b/arch/hexagon/kernel/ptrace.c @@ -28,6 +28,7 @@ #include <linux/ptrace.h> #include <linux/regset.h> #include <linux/user.h> +#include <linux/elf.h> #include <asm/user.h> diff --git a/arch/hexagon/kernel/smp.c b/arch/hexagon/kernel/smp.c index 9b44a9e2d05..1298141874a 100644 --- a/arch/hexagon/kernel/smp.c +++ b/arch/hexagon/kernel/smp.c @@ -1,7 +1,7 @@ /* * SMP support for Hexagon * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2012, Code Aurora Forum. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and @@ -28,6 +28,7 @@ #include <linux/sched.h> #include <linux/smp.h> #include <linux/spinlock.h> +#include <linux/cpu.h> #include <asm/time.h> /* timer_interrupt */ #include <asm/hexagon_vm.h> @@ -177,7 +178,12 @@ void __cpuinit start_secondary(void) printk(KERN_INFO "%s cpu %d\n", __func__, current_thread_info()->cpu); + notify_cpu_starting(cpu); + + ipi_call_lock(); set_cpu_online(cpu, true); + ipi_call_unlock(); + local_irq_enable(); cpu_idle(); diff --git a/arch/hexagon/kernel/time.c b/arch/hexagon/kernel/time.c index 6bee15c9c11..5d9b33b6793 100644 --- a/arch/hexagon/kernel/time.c +++ b/arch/hexagon/kernel/time.c @@ -28,6 +28,7 @@ #include <linux/of.h> #include <linux/of_address.h> #include <linux/of_irq.h> +#include <linux/module.h> #include <asm/timer-regs.h> #include <asm/hexagon_vm.h> diff --git a/arch/hexagon/kernel/vdso.c b/arch/hexagon/kernel/vdso.c index f212a453b52..5d39f42f708 100644 --- a/arch/hexagon/kernel/vdso.c +++ b/arch/hexagon/kernel/vdso.c @@ -21,6 +21,7 @@ #include <linux/err.h> #include <linux/mm.h> #include <linux/vmalloc.h> +#include <linux/binfmts.h> #include <asm/vdso.h> diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c index 9d0fd7d5bb8..f00ba025375 100644 --- a/arch/ia64/kernel/perfmon.c +++ b/arch/ia64/kernel/perfmon.c @@ -604,12 +604,6 @@ pfm_unprotect_ctx_ctxsw(pfm_context_t *x, unsigned long f) spin_unlock(&(x)->ctx_lock); } -static inline unsigned int -pfm_do_munmap(struct mm_struct *mm, unsigned long addr, size_t len, int acct) -{ - return do_munmap(mm, addr, len); -} - static inline unsigned long pfm_get_unmapped_area(struct file *file, unsigned long addr, unsigned long len, unsigned long pgoff, unsigned long flags, unsigned long exec) { @@ -1458,8 +1452,9 @@ pfm_unreserve_session(pfm_context_t *ctx, int is_syswide, unsigned int cpu) * a PROTECT_CTX() section. */ static int -pfm_remove_smpl_mapping(struct task_struct *task, void *vaddr, unsigned long size) +pfm_remove_smpl_mapping(void *vaddr, unsigned long size) { + struct task_struct *task = current; int r; /* sanity checks */ @@ -1473,13 +1468,8 @@ pfm_remove_smpl_mapping(struct task_struct *task, void *vaddr, unsigned long siz /* * does the actual unmapping */ - down_write(&task->mm->mmap_sem); + r = vm_munmap((unsigned long)vaddr, size); - DPRINT(("down_write done smpl_vaddr=%p size=%lu\n", vaddr, size)); - - r = pfm_do_munmap(task->mm, (unsigned long)vaddr, size, 0); - - up_write(&task->mm->mmap_sem); if (r !=0) { printk(KERN_ERR "perfmon: [%d] unable to unmap sampling buffer @%p size=%lu\n", task_pid_nr(task), vaddr, size); } @@ -1945,7 +1935,7 @@ pfm_flush(struct file *filp, fl_owner_t id) * because some VM function reenables interrupts. * */ - if (smpl_buf_vaddr) pfm_remove_smpl_mapping(current, smpl_buf_vaddr, smpl_buf_size); + if (smpl_buf_vaddr) pfm_remove_smpl_mapping(smpl_buf_vaddr, smpl_buf_size); return 0; } diff --git a/arch/m68k/configs/m5275evb_defconfig b/arch/m68k/configs/m5275evb_defconfig index 33c32aeca12..a1230e82bb1 100644 --- a/arch/m68k/configs/m5275evb_defconfig +++ b/arch/m68k/configs/m5275evb_defconfig @@ -49,7 +49,6 @@ CONFIG_BLK_DEV_RAM=y CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y CONFIG_FEC=y -CONFIG_FEC2=y # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set CONFIG_PPP=y diff --git a/arch/m68k/platform/527x/config.c b/arch/m68k/platform/527x/config.c index 7ed848c3b84..f91a53294c3 100644 --- a/arch/m68k/platform/527x/config.c +++ b/arch/m68k/platform/527x/config.c @@ -74,9 +74,7 @@ static void __init m527x_fec_init(void) writew(par | 0xf00, MCF_IPSBAR + 0x100082); v = readb(MCF_IPSBAR + 0x100078); writeb(v | 0xc0, MCF_IPSBAR + 0x100078); -#endif -#ifdef CONFIG_FEC2 /* Set multi-function pins to ethernet mode for fec1 */ par = readw(MCF_IPSBAR + 0x100082); writew(par | 0xa0, MCF_IPSBAR + 0x100082); diff --git a/arch/m68k/platform/68EZ328/Makefile b/arch/m68k/platform/68EZ328/Makefile index ee97735a242..b44d799b111 100644 --- a/arch/m68k/platform/68EZ328/Makefile +++ b/arch/m68k/platform/68EZ328/Makefile @@ -3,9 +3,3 @@ # obj-y := config.o - -extra-y := bootlogo.rh - -$(obj)/bootlogo.rh: $(src)/bootlogo.h - perl $(src)/../68328/bootlogo.pl < $(src)/bootlogo.h \ - > $(obj)/bootlogo.rh diff --git a/arch/m68k/platform/68VZ328/Makefile b/arch/m68k/platform/68VZ328/Makefile index 447ffa0fd7c..a49d75e6548 100644 --- a/arch/m68k/platform/68VZ328/Makefile +++ b/arch/m68k/platform/68VZ328/Makefile @@ -3,14 +3,9 @@ # obj-y := config.o -logo-$(UCDIMM) := bootlogo.rh -logo-$(DRAGEN2) := screen.h -extra-y := $(logo-y) - -$(obj)/bootlogo.rh: $(src)/../68EZ328/bootlogo.h - perl $(src)/bootlogo.pl < $(src)/../68328/bootlogo.h > $(obj)/bootlogo.rh +extra-$(DRAGEN2):= screen.h $(obj)/screen.h: $(src)/screen.xbm $(src)/xbm2lcd.pl perl $(src)/xbm2lcd.pl < $(src)/screen.xbm > $(obj)/screen.h -clean-files := $(obj)/screen.h $(obj)/bootlogo.rh +clean-files := $(obj)/screen.h diff --git a/arch/m68k/platform/68EZ328/bootlogo.h b/arch/m68k/platform/68VZ328/bootlogo.h index e842bdae583..b38e2b25514 100644 --- a/arch/m68k/platform/68EZ328/bootlogo.h +++ b/arch/m68k/platform/68VZ328/bootlogo.h @@ -1,6 +1,6 @@ #define splash_width 640 #define splash_height 480 -static unsigned char splash_bits[] = { +unsigned char __attribute__ ((aligned(16))) bootlogo_bits[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, diff --git a/arch/m68k/platform/coldfire/device.c b/arch/m68k/platform/coldfire/device.c index fa50c48292f..7af97362b95 100644 --- a/arch/m68k/platform/coldfire/device.c +++ b/arch/m68k/platform/coldfire/device.c @@ -114,7 +114,7 @@ static struct resource mcf_fec1_resources[] = { static struct platform_device mcf_fec1 = { .name = "fec", - .id = 0, + .id = 1, .num_resources = ARRAY_SIZE(mcf_fec1_resources), .resource = mcf_fec1_resources, }; diff --git a/arch/powerpc/boot/dts/fsl/pq3-mpic-message-B.dtsi b/arch/powerpc/boot/dts/fsl/pq3-mpic-message-B.dtsi new file mode 100644 index 00000000000..1cf0b77b1ef --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-mpic-message-B.dtsi @@ -0,0 +1,43 @@ +/* + * PQ3 MPIC Message (Group B) device tree stub [ controller @ offset 0x42400 ] + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +message@42400 { + compatible = "fsl,mpic-v3.1-msgr"; + reg = <0x42400 0x200>; + interrupts = < + 0xb4 2 0 0 + 0xb5 2 0 0 + 0xb6 2 0 0 + 0xb7 2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi b/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi index fdedf7b1fe0..71c30eb1005 100644 --- a/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi +++ b/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi @@ -53,6 +53,16 @@ timer@41100 { 3 0 3 0>; }; +message@41400 { + compatible = "fsl,mpic-v3.1-msgr"; + reg = <0x41400 0x200>; + interrupts = < + 0xb0 2 0 0 + 0xb1 2 0 0 + 0xb2 2 0 0 + 0xb3 2 0 0>; +}; + msi@41600 { compatible = "fsl,mpic-msi"; reg = <0x41600 0x80>; diff --git a/arch/powerpc/include/asm/mpic.h b/arch/powerpc/include/asm/mpic.h index c65b9294376..c9f698a994b 100644 --- a/arch/powerpc/include/asm/mpic.h +++ b/arch/powerpc/include/asm/mpic.h @@ -275,9 +275,6 @@ struct mpic unsigned int isu_mask; /* Number of sources */ unsigned int num_sources; - /* default senses array */ - unsigned char *senses; - unsigned int senses_count; /* vector numbers used for internal sources (ipi/timers) */ unsigned int ipi_vecs[4]; @@ -415,21 +412,6 @@ extern struct mpic *mpic_alloc(struct device_node *node, extern void mpic_assign_isu(struct mpic *mpic, unsigned int isu_num, phys_addr_t phys_addr); -/* Set default sense codes - * - * @mpic: controller - * @senses: array of sense codes - * @count: size of above array - * - * Optionally provide an array (indexed on hardware interrupt numbers - * for this MPIC) of default sense codes for the chip. Those are linux - * sense codes IRQ_TYPE_* - * - * The driver gets ownership of the pointer, don't dispose of it or - * anything like that. __init only. - */ -extern void mpic_set_default_senses(struct mpic *mpic, u8 *senses, int count); - /* Initialize the controller. After this has been called, none of the above * should be called again for this mpic diff --git a/arch/powerpc/include/asm/mpic_msgr.h b/arch/powerpc/include/asm/mpic_msgr.h index 3ec37dc9003..326d33ca55c 100644 --- a/arch/powerpc/include/asm/mpic_msgr.h +++ b/arch/powerpc/include/asm/mpic_msgr.h @@ -13,6 +13,7 @@ #include <linux/types.h> #include <linux/spinlock.h> +#include <asm/smp.h> struct mpic_msgr { u32 __iomem *base; diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h index b86faa9107d..8a97aa7289d 100644 --- a/arch/powerpc/include/asm/reg_booke.h +++ b/arch/powerpc/include/asm/reg_booke.h @@ -15,11 +15,6 @@ #ifndef __ASM_POWERPC_REG_BOOKE_H__ #define __ASM_POWERPC_REG_BOOKE_H__ -#ifdef CONFIG_BOOKE_WDT -extern u32 booke_wdt_enabled; -extern u32 booke_wdt_period; -#endif /* CONFIG_BOOKE_WDT */ - /* Machine State Register (MSR) Fields */ #define MSR_GS (1<<28) /* Guest state */ #define MSR_UCLE (1<<26) /* User-mode cache lock enable */ diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index 9825f29d1fa..ec8a53fa9e8 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -150,6 +150,9 @@ notrace void __init machine_init(u64 dt_ptr) } #ifdef CONFIG_BOOKE_WDT +extern u32 booke_wdt_enabled; +extern u32 booke_wdt_period; + /* Checks wdt=x and wdt_period=xx command-line option */ notrace int __init early_parse_wdt(char *p) { diff --git a/arch/powerpc/platforms/85xx/common.c b/arch/powerpc/platforms/85xx/common.c index 9fef5302adc..67dac22b436 100644 --- a/arch/powerpc/platforms/85xx/common.c +++ b/arch/powerpc/platforms/85xx/common.c @@ -21,6 +21,12 @@ static struct of_device_id __initdata mpc85xx_common_ids[] = { { .compatible = "fsl,qe", }, { .compatible = "fsl,cpm2", }, { .compatible = "fsl,srio", }, + /* So that the DMA channel nodes can be probed individually: */ + { .compatible = "fsl,eloplus-dma", }, + /* For the PMC driver */ + { .compatible = "fsl,mpc8548-guts", }, + /* Probably unnecessary? */ + { .compatible = "gpio-leds", }, {}, }; diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c index 9a6f04406e0..d208ebccb91 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c @@ -399,12 +399,6 @@ static int __init board_fixups(void) machine_arch_initcall(mpc8568_mds, board_fixups); machine_arch_initcall(mpc8569_mds, board_fixups); -static struct of_device_id mpc85xx_ids[] = { - { .compatible = "fsl,mpc8548-guts", }, - { .compatible = "gpio-leds", }, - {}, -}; - static int __init mpc85xx_publish_devices(void) { if (machine_is(mpc8568_mds)) @@ -412,10 +406,7 @@ static int __init mpc85xx_publish_devices(void) if (machine_is(mpc8569_mds)) simple_gpiochip_init("fsl,mpc8569mds-bcsr-gpio"); - mpc85xx_common_publish_devices(); - of_platform_bus_probe(NULL, mpc85xx_ids, NULL); - - return 0; + return mpc85xx_common_publish_devices(); } machine_device_initcall(mpc8568_mds, mpc85xx_publish_devices); diff --git a/arch/powerpc/platforms/85xx/p1022_ds.c b/arch/powerpc/platforms/85xx/p1022_ds.c index e74b7cde9ae..f700c81a132 100644 --- a/arch/powerpc/platforms/85xx/p1022_ds.c +++ b/arch/powerpc/platforms/85xx/p1022_ds.c @@ -460,18 +460,7 @@ static void __init p1022_ds_setup_arch(void) pr_info("Freescale P1022 DS reference board\n"); } -static struct of_device_id __initdata p1022_ds_ids[] = { - /* So that the DMA channel nodes can be probed individually: */ - { .compatible = "fsl,eloplus-dma", }, - {}, -}; - -static int __init p1022_ds_publish_devices(void) -{ - mpc85xx_common_publish_devices(); - return of_platform_bus_probe(NULL, p1022_ds_ids, NULL); -} -machine_device_initcall(p1022_ds, p1022_ds_publish_devices); +machine_device_initcall(p1022_ds, mpc85xx_common_publish_devices); machine_arch_initcall(p1022_ds, swiotlb_setup_bus_notifier); diff --git a/arch/powerpc/platforms/powermac/low_i2c.c b/arch/powerpc/platforms/powermac/low_i2c.c index 996c5ff7824..03685a329d7 100644 --- a/arch/powerpc/platforms/powermac/low_i2c.c +++ b/arch/powerpc/platforms/powermac/low_i2c.c @@ -366,11 +366,20 @@ static void kw_i2c_timeout(unsigned long data) unsigned long flags; spin_lock_irqsave(&host->lock, flags); + + /* + * If the timer is pending, that means we raced with the + * irq, in which case we just return + */ + if (timer_pending(&host->timeout_timer)) + goto skip; + kw_i2c_handle_interrupt(host, kw_read_reg(reg_isr)); if (host->state != state_idle) { host->timeout_timer.expires = jiffies + KW_POLL_TIMEOUT; add_timer(&host->timeout_timer); } + skip: spin_unlock_irqrestore(&host->lock, flags); } diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c index 309d38ef732..a75e37dc41a 100644 --- a/arch/powerpc/platforms/pseries/eeh.c +++ b/arch/powerpc/platforms/pseries/eeh.c @@ -1076,7 +1076,7 @@ static void eeh_add_device_late(struct pci_dev *dev) pr_debug("EEH: Adding device %s\n", pci_name(dev)); dn = pci_device_to_OF_node(dev); - edev = pci_dev_to_eeh_dev(dev); + edev = of_node_to_eeh_dev(dn); if (edev->pdev == dev) { pr_debug("EEH: Already referenced !\n"); return; diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index 9ac71ebd2c4..395af134774 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -604,18 +604,14 @@ static struct mpic *mpic_find(unsigned int irq) } /* Determine if the linux irq is an IPI */ -static unsigned int mpic_is_ipi(struct mpic *mpic, unsigned int irq) +static unsigned int mpic_is_ipi(struct mpic *mpic, unsigned int src) { - unsigned int src = virq_to_hw(irq); - return (src >= mpic->ipi_vecs[0] && src <= mpic->ipi_vecs[3]); } /* Determine if the linux irq is a timer */ -static unsigned int mpic_is_tm(struct mpic *mpic, unsigned int irq) +static unsigned int mpic_is_tm(struct mpic *mpic, unsigned int src) { - unsigned int src = virq_to_hw(irq); - return (src >= mpic->timer_vecs[0] && src <= mpic->timer_vecs[7]); } @@ -876,21 +872,45 @@ int mpic_set_irq_type(struct irq_data *d, unsigned int flow_type) if (src >= mpic->num_sources) return -EINVAL; + vold = mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI)); + + /* We don't support "none" type */ if (flow_type == IRQ_TYPE_NONE) - if (mpic->senses && src < mpic->senses_count) - flow_type = mpic->senses[src]; - if (flow_type == IRQ_TYPE_NONE) - flow_type = IRQ_TYPE_LEVEL_LOW; + flow_type = IRQ_TYPE_DEFAULT; + + /* Default: read HW settings */ + if (flow_type == IRQ_TYPE_DEFAULT) { + switch(vold & (MPIC_INFO(VECPRI_POLARITY_MASK) | + MPIC_INFO(VECPRI_SENSE_MASK))) { + case MPIC_INFO(VECPRI_SENSE_EDGE) | + MPIC_INFO(VECPRI_POLARITY_POSITIVE): + flow_type = IRQ_TYPE_EDGE_RISING; + break; + case MPIC_INFO(VECPRI_SENSE_EDGE) | + MPIC_INFO(VECPRI_POLARITY_NEGATIVE): + flow_type = IRQ_TYPE_EDGE_FALLING; + break; + case MPIC_INFO(VECPRI_SENSE_LEVEL) | + MPIC_INFO(VECPRI_POLARITY_POSITIVE): + flow_type = IRQ_TYPE_LEVEL_HIGH; + break; + case MPIC_INFO(VECPRI_SENSE_LEVEL) | + MPIC_INFO(VECPRI_POLARITY_NEGATIVE): + flow_type = IRQ_TYPE_LEVEL_LOW; + break; + } + } + /* Apply to irq desc */ irqd_set_trigger_type(d, flow_type); + /* Apply to HW */ if (mpic_is_ht_interrupt(mpic, src)) vecpri = MPIC_VECPRI_POLARITY_POSITIVE | MPIC_VECPRI_SENSE_EDGE; else vecpri = mpic_type_to_vecpri(mpic, flow_type); - vold = mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI)); vnew = vold & ~(MPIC_INFO(VECPRI_POLARITY_MASK) | MPIC_INFO(VECPRI_SENSE_MASK)); vnew |= vecpri; @@ -1026,7 +1046,7 @@ static int mpic_host_map(struct irq_domain *h, unsigned int virq, irq_set_chip_and_handler(virq, chip, handle_fasteoi_irq); /* Set default irq type */ - irq_set_irq_type(virq, IRQ_TYPE_NONE); + irq_set_irq_type(virq, IRQ_TYPE_DEFAULT); /* If the MPIC was reset, then all vectors have already been * initialized. Otherwise, a per source lazy initialization @@ -1417,12 +1437,6 @@ void __init mpic_assign_isu(struct mpic *mpic, unsigned int isu_num, mpic->num_sources = isu_first + mpic->isu_size; } -void __init mpic_set_default_senses(struct mpic *mpic, u8 *senses, int count) -{ - mpic->senses = senses; - mpic->senses_count = count; -} - void __init mpic_init(struct mpic *mpic) { int i, cpu; @@ -1555,12 +1569,12 @@ void mpic_irq_set_priority(unsigned int irq, unsigned int pri) return; raw_spin_lock_irqsave(&mpic_lock, flags); - if (mpic_is_ipi(mpic, irq)) { + if (mpic_is_ipi(mpic, src)) { reg = mpic_ipi_read(src - mpic->ipi_vecs[0]) & ~MPIC_VECPRI_PRIORITY_MASK; mpic_ipi_write(src - mpic->ipi_vecs[0], reg | (pri << MPIC_VECPRI_PRIORITY_SHIFT)); - } else if (mpic_is_tm(mpic, irq)) { + } else if (mpic_is_tm(mpic, src)) { reg = mpic_tm_read(src - mpic->timer_vecs[0]) & ~MPIC_VECPRI_PRIORITY_MASK; mpic_tm_write(src - mpic->timer_vecs[0], diff --git a/arch/powerpc/sysdev/mpic_msgr.c b/arch/powerpc/sysdev/mpic_msgr.c index 6e7fa386e76..483d8fa72e8 100644 --- a/arch/powerpc/sysdev/mpic_msgr.c +++ b/arch/powerpc/sysdev/mpic_msgr.c @@ -27,6 +27,7 @@ static struct mpic_msgr **mpic_msgrs; static unsigned int mpic_msgr_count; +static DEFINE_RAW_SPINLOCK(msgrs_lock); static inline void _mpic_msgr_mer_write(struct mpic_msgr *msgr, u32 value) { @@ -56,12 +57,11 @@ struct mpic_msgr *mpic_msgr_get(unsigned int reg_num) if (reg_num >= mpic_msgr_count) return ERR_PTR(-ENODEV); - raw_spin_lock_irqsave(&msgr->lock, flags); - if (mpic_msgrs[reg_num]->in_use == MSGR_FREE) { - msgr = mpic_msgrs[reg_num]; + raw_spin_lock_irqsave(&msgrs_lock, flags); + msgr = mpic_msgrs[reg_num]; + if (msgr->in_use == MSGR_FREE) msgr->in_use = MSGR_INUSE; - } - raw_spin_unlock_irqrestore(&msgr->lock, flags); + raw_spin_unlock_irqrestore(&msgrs_lock, flags); return msgr; } @@ -228,7 +228,7 @@ static __devinit int mpic_msgr_probe(struct platform_device *dev) reg_number = block_number * MPIC_MSGR_REGISTERS_PER_BLOCK + i; msgr->base = msgr_block_addr + i * MPIC_MSGR_STRIDE; - msgr->mer = msgr->base + MPIC_MSGR_MER_OFFSET; + msgr->mer = (u32 *)((u8 *)msgr->base + MPIC_MSGR_MER_OFFSET); msgr->in_use = MSGR_FREE; msgr->num = i; raw_spin_lock_init(&msgr->lock); diff --git a/arch/powerpc/sysdev/scom.c b/arch/powerpc/sysdev/scom.c index 49a3ece1c6b..702256a1ca1 100644 --- a/arch/powerpc/sysdev/scom.c +++ b/arch/powerpc/sysdev/scom.c @@ -22,6 +22,7 @@ #include <linux/debugfs.h> #include <linux/slab.h> #include <linux/export.h> +#include <asm/debug.h> #include <asm/prom.h> #include <asm/scom.h> diff --git a/arch/sh/include/asm/atomic.h b/arch/sh/include/asm/atomic.h index 37f2f4a5523..f4c1c20bcdf 100644 --- a/arch/sh/include/asm/atomic.h +++ b/arch/sh/include/asm/atomic.h @@ -11,7 +11,7 @@ #include <linux/types.h> #include <asm/cmpxchg.h> -#define ATOMIC_INIT(i) ( (atomic_t) { (i) } ) +#define ATOMIC_INIT(i) { (i) } #define atomic_read(v) (*(volatile int *)&(v)->counter) #define atomic_set(v,i) ((v)->counter = (i)) diff --git a/arch/sh/mm/fault_32.c b/arch/sh/mm/fault_32.c index 324eef93c90..e99b104d967 100644 --- a/arch/sh/mm/fault_32.c +++ b/arch/sh/mm/fault_32.c @@ -86,7 +86,7 @@ static noinline int vmalloc_fault(unsigned long address) pte_t *pte_k; /* Make sure we are in vmalloc/module/P3 area: */ - if (!(address >= VMALLOC_START && address < P3_ADDR_MAX)) + if (!(address >= P3SEG && address < P3_ADDR_MAX)) return -1; /* diff --git a/arch/sparc/kernel/leon_smp.c b/arch/sparc/kernel/leon_smp.c index 1210fde1874..160cac9c403 100644 --- a/arch/sparc/kernel/leon_smp.c +++ b/arch/sparc/kernel/leon_smp.c @@ -23,6 +23,7 @@ #include <linux/pm.h> #include <linux/delay.h> #include <linux/gfp.h> +#include <linux/cpu.h> #include <asm/cacheflush.h> #include <asm/tlbflush.h> @@ -78,6 +79,8 @@ void __cpuinit leon_callin(void) local_flush_tlb_all(); leon_configure_cache_smp(); + notify_cpu_starting(cpuid); + /* Get our local ticker going. */ smp_setup_percpu_timer(); diff --git a/arch/sparc/kernel/sys_sparc_64.c b/arch/sparc/kernel/sys_sparc_64.c index 232df994953..3ee51f189a5 100644 --- a/arch/sparc/kernel/sys_sparc_64.c +++ b/arch/sparc/kernel/sys_sparc_64.c @@ -566,15 +566,10 @@ out: SYSCALL_DEFINE2(64_munmap, unsigned long, addr, size_t, len) { - long ret; - if (invalid_64bit_range(addr, len)) return -EINVAL; - down_write(¤t->mm->mmap_sem); - ret = do_munmap(current->mm, addr, len); - up_write(¤t->mm->mmap_sem); - return ret; + return vm_munmap(addr, len); } extern unsigned long do_mremap(unsigned long addr, diff --git a/arch/tile/include/asm/pci.h b/arch/tile/include/asm/pci.h index 5d5a635530b..32e6cbe8dff 100644 --- a/arch/tile/include/asm/pci.h +++ b/arch/tile/include/asm/pci.h @@ -47,8 +47,8 @@ struct pci_controller { */ #define PCI_DMA_BUS_IS_PHYS 1 -int __devinit tile_pci_init(void); -int __devinit pcibios_init(void); +int __init tile_pci_init(void); +int __init pcibios_init(void); static inline void pci_iounmap(struct pci_dev *dev, void __iomem *addr) {} diff --git a/arch/tile/kernel/pci.c b/arch/tile/kernel/pci.c index a1bb59eecc1..b56d12bf590 100644 --- a/arch/tile/kernel/pci.c +++ b/arch/tile/kernel/pci.c @@ -141,7 +141,7 @@ static int __devinit tile_init_irqs(int controller_id, * * Returns the number of controllers discovered. */ -int __devinit tile_pci_init(void) +int __init tile_pci_init(void) { int i; @@ -287,7 +287,7 @@ static void __devinit fixup_read_and_payload_sizes(void) * The controllers have been set up by the time we get here, by a call to * tile_pci_init. */ -int __devinit pcibios_init(void) +int __init pcibios_init(void) { int i; diff --git a/arch/tile/kernel/single_step.c b/arch/tile/kernel/single_step.c index 9efbc1391b3..89529c9f060 100644 --- a/arch/tile/kernel/single_step.c +++ b/arch/tile/kernel/single_step.c @@ -346,12 +346,10 @@ void single_step_once(struct pt_regs *regs) } /* allocate a cache line of writable, executable memory */ - down_write(¤t->mm->mmap_sem); - buffer = (void __user *) do_mmap(NULL, 0, 64, + buffer = (void __user *) vm_mmap(NULL, 0, 64, PROT_EXEC | PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS, 0); - up_write(¤t->mm->mmap_sem); if (IS_ERR((void __force *)buffer)) { kfree(state); diff --git a/arch/x86/boot/compressed/head_32.S b/arch/x86/boot/compressed/head_32.S index a0559930a18..c85e3ac99bb 100644 --- a/arch/x86/boot/compressed/head_32.S +++ b/arch/x86/boot/compressed/head_32.S @@ -33,6 +33,9 @@ __HEAD ENTRY(startup_32) #ifdef CONFIG_EFI_STUB + jmp preferred_addr + + .balign 0x10 /* * We don't need the return address, so set up the stack so * efi_main() can find its arugments. @@ -41,12 +44,17 @@ ENTRY(startup_32) call efi_main cmpl $0, %eax - je preferred_addr movl %eax, %esi - call 1f + jne 2f 1: + /* EFI init failed, so hang. */ + hlt + jmp 1b +2: + call 3f +3: popl %eax - subl $1b, %eax + subl $3b, %eax subl BP_pref_address(%esi), %eax add BP_code32_start(%esi), %eax leal preferred_addr(%eax), %eax diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S index 558d76ce23b..87e03a13d8e 100644 --- a/arch/x86/boot/compressed/head_64.S +++ b/arch/x86/boot/compressed/head_64.S @@ -200,18 +200,28 @@ ENTRY(startup_64) * entire text+data+bss and hopefully all of memory. */ #ifdef CONFIG_EFI_STUB - pushq %rsi + /* + * The entry point for the PE/COFF executable is 0x210, so only + * legacy boot loaders will execute this jmp. + */ + jmp preferred_addr + + .org 0x210 mov %rcx, %rdi mov %rdx, %rsi call efi_main - popq %rsi - cmpq $0,%rax - je preferred_addr movq %rax,%rsi - call 1f + cmpq $0,%rax + jne 2f 1: + /* EFI init failed, so hang. */ + hlt + jmp 1b +2: + call 3f +3: popq %rax - subq $1b, %rax + subq $3b, %rax subq BP_pref_address(%rsi), %rax add BP_code32_start(%esi), %eax leaq preferred_addr(%rax), %rax diff --git a/arch/x86/boot/tools/build.c b/arch/x86/boot/tools/build.c index ed549767a23..24443a33208 100644 --- a/arch/x86/boot/tools/build.c +++ b/arch/x86/boot/tools/build.c @@ -205,8 +205,13 @@ int main(int argc, char ** argv) put_unaligned_le32(file_sz, &buf[pe_header + 0x50]); #ifdef CONFIG_X86_32 - /* Address of entry point */ - put_unaligned_le32(i, &buf[pe_header + 0x28]); + /* + * Address of entry point. + * + * The EFI stub entry point is +16 bytes from the start of + * the .text section. + */ + put_unaligned_le32(i + 16, &buf[pe_header + 0x28]); /* .text size */ put_unaligned_le32(file_sz, &buf[pe_header + 0xb0]); @@ -217,9 +222,11 @@ int main(int argc, char ** argv) /* * Address of entry point. startup_32 is at the beginning and * the 64-bit entry point (startup_64) is always 512 bytes - * after. + * after. The EFI stub entry point is 16 bytes after that, as + * the first instruction allows legacy loaders to jump over + * the EFI stub initialisation */ - put_unaligned_le32(i + 512, &buf[pe_header + 0x28]); + put_unaligned_le32(i + 528, &buf[pe_header + 0x28]); /* .text size */ put_unaligned_le32(file_sz, &buf[pe_header + 0xc0]); diff --git a/arch/x86/ia32/ia32_aout.c b/arch/x86/ia32/ia32_aout.c index d511d951a05..4824fb45560 100644 --- a/arch/x86/ia32/ia32_aout.c +++ b/arch/x86/ia32/ia32_aout.c @@ -119,9 +119,7 @@ static void set_brk(unsigned long start, unsigned long end) end = PAGE_ALIGN(end); if (end <= start) return; - down_write(¤t->mm->mmap_sem); - do_brk(start, end - start); - up_write(¤t->mm->mmap_sem); + vm_brk(start, end - start); } #ifdef CORE_DUMP @@ -332,9 +330,7 @@ static int load_aout_binary(struct linux_binprm *bprm, struct pt_regs *regs) pos = 32; map_size = ex.a_text+ex.a_data; - down_write(¤t->mm->mmap_sem); - error = do_brk(text_addr & PAGE_MASK, map_size); - up_write(¤t->mm->mmap_sem); + error = vm_brk(text_addr & PAGE_MASK, map_size); if (error != (text_addr & PAGE_MASK)) { send_sig(SIGKILL, current, 0); @@ -373,9 +369,7 @@ static int load_aout_binary(struct linux_binprm *bprm, struct pt_regs *regs) if (!bprm->file->f_op->mmap || (fd_offset & ~PAGE_MASK) != 0) { loff_t pos = fd_offset; - down_write(¤t->mm->mmap_sem); - do_brk(N_TXTADDR(ex), ex.a_text+ex.a_data); - up_write(¤t->mm->mmap_sem); + vm_brk(N_TXTADDR(ex), ex.a_text+ex.a_data); bprm->file->f_op->read(bprm->file, (char __user *)N_TXTADDR(ex), ex.a_text+ex.a_data, &pos); @@ -385,26 +379,22 @@ static int load_aout_binary(struct linux_binprm *bprm, struct pt_regs *regs) goto beyond_if; } - down_write(¤t->mm->mmap_sem); - error = do_mmap(bprm->file, N_TXTADDR(ex), ex.a_text, + error = vm_mmap(bprm->file, N_TXTADDR(ex), ex.a_text, PROT_READ | PROT_EXEC, MAP_FIXED | MAP_PRIVATE | MAP_DENYWRITE | MAP_EXECUTABLE | MAP_32BIT, fd_offset); - up_write(¤t->mm->mmap_sem); if (error != N_TXTADDR(ex)) { send_sig(SIGKILL, current, 0); return error; } - down_write(¤t->mm->mmap_sem); - error = do_mmap(bprm->file, N_DATADDR(ex), ex.a_data, + error = vm_mmap(bprm->file, N_DATADDR(ex), ex.a_data, PROT_READ | PROT_WRITE | PROT_EXEC, MAP_FIXED | MAP_PRIVATE | MAP_DENYWRITE | MAP_EXECUTABLE | MAP_32BIT, fd_offset + ex.a_text); - up_write(¤t->mm->mmap_sem); if (error != N_DATADDR(ex)) { send_sig(SIGKILL, current, 0); return error; @@ -476,9 +466,7 @@ static int load_aout_library(struct file *file) error_time = jiffies; } #endif - down_write(¤t->mm->mmap_sem); - do_brk(start_addr, ex.a_text + ex.a_data + ex.a_bss); - up_write(¤t->mm->mmap_sem); + vm_brk(start_addr, ex.a_text + ex.a_data + ex.a_bss); file->f_op->read(file, (char __user *)start_addr, ex.a_text + ex.a_data, &pos); @@ -490,12 +478,10 @@ static int load_aout_library(struct file *file) goto out; } /* Now use mmap to map the library into memory. */ - down_write(¤t->mm->mmap_sem); - error = do_mmap(file, start_addr, ex.a_text + ex.a_data, + error = vm_mmap(file, start_addr, ex.a_text + ex.a_data, PROT_READ | PROT_WRITE | PROT_EXEC, MAP_FIXED | MAP_PRIVATE | MAP_DENYWRITE | MAP_32BIT, N_TXTOFF(ex)); - up_write(¤t->mm->mmap_sem); retval = error; if (error != start_addr) goto out; @@ -503,9 +489,7 @@ static int load_aout_library(struct file *file) len = PAGE_ALIGN(ex.a_text + ex.a_data); bss = ex.a_text + ex.a_data + ex.a_bss; if (bss > len) { - down_write(¤t->mm->mmap_sem); - error = do_brk(start_addr + len, bss - len); - up_write(¤t->mm->mmap_sem); + error = vm_brk(start_addr + len, bss - len); retval = error; if (error != start_addr + len) goto out; diff --git a/arch/x86/include/asm/posix_types.h b/arch/x86/include/asm/posix_types.h index 3427b7798db..7ef7c3020e5 100644 --- a/arch/x86/include/asm/posix_types.h +++ b/arch/x86/include/asm/posix_types.h @@ -7,9 +7,9 @@ #else # ifdef __i386__ # include "posix_types_32.h" -# elif defined(__LP64__) -# include "posix_types_64.h" -# else +# elif defined(__ILP32__) # include "posix_types_x32.h" +# else +# include "posix_types_64.h" # endif #endif diff --git a/arch/x86/include/asm/sigcontext.h b/arch/x86/include/asm/sigcontext.h index 4a085383af2..5ca71c065ee 100644 --- a/arch/x86/include/asm/sigcontext.h +++ b/arch/x86/include/asm/sigcontext.h @@ -257,7 +257,7 @@ struct sigcontext { __u64 oldmask; __u64 cr2; struct _fpstate __user *fpstate; /* zero when no FPU context */ -#ifndef __LP64__ +#ifdef __ILP32__ __u32 __fpstate_pad; #endif __u64 reserved1[8]; diff --git a/arch/x86/include/asm/siginfo.h b/arch/x86/include/asm/siginfo.h index fc1aa553564..34c47b3341c 100644 --- a/arch/x86/include/asm/siginfo.h +++ b/arch/x86/include/asm/siginfo.h @@ -2,7 +2,13 @@ #define _ASM_X86_SIGINFO_H #ifdef __x86_64__ -# define __ARCH_SI_PREAMBLE_SIZE (4 * sizeof(int)) +# ifdef __ILP32__ /* x32 */ +typedef long long __kernel_si_clock_t __attribute__((aligned(4))); +# define __ARCH_SI_CLOCK_T __kernel_si_clock_t +# define __ARCH_SI_ATTRIBUTES __attribute__((aligned(8))) +# else /* x86-64 */ +# define __ARCH_SI_PREAMBLE_SIZE (4 * sizeof(int)) +# endif #endif #include <asm-generic/siginfo.h> diff --git a/arch/x86/include/asm/unistd.h b/arch/x86/include/asm/unistd.h index 37cdc9d99bb..4437001d8e3 100644 --- a/arch/x86/include/asm/unistd.h +++ b/arch/x86/include/asm/unistd.h @@ -63,10 +63,10 @@ #else # ifdef __i386__ # include <asm/unistd_32.h> -# elif defined(__LP64__) -# include <asm/unistd_64.h> -# else +# elif defined(__ILP32__) # include <asm/unistd_x32.h> +# else +# include <asm/unistd_64.h> # endif #endif diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h index baaca8defec..764b66a4cf8 100644 --- a/arch/x86/include/asm/x86_init.h +++ b/arch/x86/include/asm/x86_init.h @@ -195,6 +195,5 @@ extern struct x86_msi_ops x86_msi; extern void x86_init_noop(void); extern void x86_init_uint_noop(unsigned int unused); -extern void x86_default_fixup_cpu_id(struct cpuinfo_x86 *c, int node); #endif diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c index 103b6ab368d..146a49c763a 100644 --- a/arch/x86/kernel/acpi/sleep.c +++ b/arch/x86/kernel/acpi/sleep.c @@ -24,6 +24,10 @@ unsigned long acpi_realmode_flags; static char temp_stack[4096]; #endif +asmlinkage void acpi_enter_s3(void) +{ + acpi_enter_sleep_state(3, wake_sleep_flags); +} /** * acpi_suspend_lowlevel - save kernel state * diff --git a/arch/x86/kernel/acpi/sleep.h b/arch/x86/kernel/acpi/sleep.h index 416d4be13fe..d68677a2a01 100644 --- a/arch/x86/kernel/acpi/sleep.h +++ b/arch/x86/kernel/acpi/sleep.h @@ -3,12 +3,16 @@ */ #include <asm/trampoline.h> +#include <linux/linkage.h> extern unsigned long saved_video_mode; extern long saved_magic; extern int wakeup_pmode_return; +extern u8 wake_sleep_flags; +extern asmlinkage void acpi_enter_s3(void); + extern unsigned long acpi_copy_wakeup_routine(unsigned long); extern void wakeup_long64(void); diff --git a/arch/x86/kernel/acpi/wakeup_32.S b/arch/x86/kernel/acpi/wakeup_32.S index 13ab720573e..72610839f03 100644 --- a/arch/x86/kernel/acpi/wakeup_32.S +++ b/arch/x86/kernel/acpi/wakeup_32.S @@ -74,9 +74,7 @@ restore_registers: ENTRY(do_suspend_lowlevel) call save_processor_state call save_registers - pushl $3 - call acpi_enter_sleep_state - addl $4, %esp + call acpi_enter_s3 # In case of S3 failure, we'll emerge here. Jump # to ret_point to recover diff --git a/arch/x86/kernel/acpi/wakeup_64.S b/arch/x86/kernel/acpi/wakeup_64.S index 8ea5164cbd0..014d1d28c39 100644 --- a/arch/x86/kernel/acpi/wakeup_64.S +++ b/arch/x86/kernel/acpi/wakeup_64.S @@ -71,9 +71,7 @@ ENTRY(do_suspend_lowlevel) movq %rsi, saved_rsi addq $8, %rsp - movl $3, %edi - xorl %eax, %eax - call acpi_enter_sleep_state + call acpi_enter_s3 /* in case something went wrong, restore the machine status and go on */ jmp resume_point diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 11544d8f1e9..edc24480469 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -1637,9 +1637,11 @@ static int __init apic_verify(void) mp_lapic_addr = APIC_DEFAULT_PHYS_BASE; /* The BIOS may have set up the APIC at some other address */ - rdmsr(MSR_IA32_APICBASE, l, h); - if (l & MSR_IA32_APICBASE_ENABLE) - mp_lapic_addr = l & MSR_IA32_APICBASE_BASE; + if (boot_cpu_data.x86 >= 6) { + rdmsr(MSR_IA32_APICBASE, l, h); + if (l & MSR_IA32_APICBASE_ENABLE) + mp_lapic_addr = l & MSR_IA32_APICBASE_BASE; + } pr_info("Found and enabled local APIC!\n"); return 0; @@ -1657,13 +1659,15 @@ int __init apic_force_enable(unsigned long addr) * MSR. This can only be done in software for Intel P6 or later * and AMD K7 (Model > 1) or later. */ - rdmsr(MSR_IA32_APICBASE, l, h); - if (!(l & MSR_IA32_APICBASE_ENABLE)) { - pr_info("Local APIC disabled by BIOS -- reenabling.\n"); - l &= ~MSR_IA32_APICBASE_BASE; - l |= MSR_IA32_APICBASE_ENABLE | addr; - wrmsr(MSR_IA32_APICBASE, l, h); - enabled_via_apicbase = 1; + if (boot_cpu_data.x86 >= 6) { + rdmsr(MSR_IA32_APICBASE, l, h); + if (!(l & MSR_IA32_APICBASE_ENABLE)) { + pr_info("Local APIC disabled by BIOS -- reenabling.\n"); + l &= ~MSR_IA32_APICBASE_BASE; + l |= MSR_IA32_APICBASE_ENABLE | addr; + wrmsr(MSR_IA32_APICBASE, l, h); + enabled_via_apicbase = 1; + } } return apic_verify(); } @@ -2209,10 +2213,12 @@ static void lapic_resume(void) * FIXME! This will be wrong if we ever support suspend on * SMP! We'll need to do this as part of the CPU restore! */ - rdmsr(MSR_IA32_APICBASE, l, h); - l &= ~MSR_IA32_APICBASE_BASE; - l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr; - wrmsr(MSR_IA32_APICBASE, l, h); + if (boot_cpu_data.x86 >= 6) { + rdmsr(MSR_IA32_APICBASE, l, h); + l &= ~MSR_IA32_APICBASE_BASE; + l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr; + wrmsr(MSR_IA32_APICBASE, l, h); + } } maxlvt = lapic_get_maxlvt(); diff --git a/arch/x86/kernel/apic/apic_numachip.c b/arch/x86/kernel/apic/apic_numachip.c index 899803e0321..23e75422e01 100644 --- a/arch/x86/kernel/apic/apic_numachip.c +++ b/arch/x86/kernel/apic/apic_numachip.c @@ -207,8 +207,11 @@ static void __init map_csrs(void) static void fixup_cpu_id(struct cpuinfo_x86 *c, int node) { - c->phys_proc_id = node; - per_cpu(cpu_llc_id, smp_processor_id()) = node; + + if (c->phys_proc_id != node) { + c->phys_proc_id = node; + per_cpu(cpu_llc_id, smp_processor_id()) = node; + } } static int __init numachip_system_init(void) diff --git a/arch/x86/kernel/apic/x2apic_phys.c b/arch/x86/kernel/apic/x2apic_phys.c index 8a778db45e3..991e315f422 100644 --- a/arch/x86/kernel/apic/x2apic_phys.c +++ b/arch/x86/kernel/apic/x2apic_phys.c @@ -24,6 +24,12 @@ static int x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id) { if (x2apic_phys) return x2apic_enabled(); + else if ((acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID) && + (acpi_gbl_FADT.flags & ACPI_FADT_APIC_PHYSICAL) && + x2apic_enabled()) { + printk(KERN_DEBUG "System requires x2apic physical mode\n"); + return 1; + } else return 0; } diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index 0a44b90602b..1c67ca100e4 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -26,7 +26,8 @@ * contact AMD for precise details and a CPU swap. * * See http://www.multimania.com/poulot/k6bug.html - * http://www.amd.com/K6/k6docs/revgd.html + * and section 2.6.2 of "AMD-K6 Processor Revision Guide - Model 6" + * (Publication # 21266 Issue Date: August 1998) * * The following test is erm.. interesting. AMD neglected to up * the chip setting when fixing the bug but they also tweaked some @@ -94,7 +95,6 @@ static void __cpuinit init_amd_k6(struct cpuinfo_x86 *c) "system stability may be impaired when more than 32 MB are used.\n"); else printk(KERN_CONT "probably OK (after B9730xxxx).\n"); - printk(KERN_INFO "Please see http://membres.lycos.fr/poulot/k6bug.html\n"); } /* K6 with old style WHCR */ @@ -353,10 +353,11 @@ static void __cpuinit srat_detect_node(struct cpuinfo_x86 *c) node = per_cpu(cpu_llc_id, cpu); /* - * If core numbers are inconsistent, it's likely a multi-fabric platform, - * so invoke platform-specific handler + * On multi-fabric platform (e.g. Numascale NumaChip) a + * platform-specific handler needs to be called to fixup some + * IDs of the CPU. */ - if (c->phys_proc_id != node) + if (x86_cpuinit.fixup_cpu_id) x86_cpuinit.fixup_cpu_id(c, node); if (!node_online(node)) { diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index 67e258362a3..cf79302198a 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -1163,15 +1163,6 @@ static void dbg_restore_debug_regs(void) #endif /* ! CONFIG_KGDB */ /* - * Prints an error where the NUMA and configured core-number mismatch and the - * platform didn't override this to fix it up - */ -void __cpuinit x86_default_fixup_cpu_id(struct cpuinfo_x86 *c, int node) -{ - pr_err("NUMA core number %d differs from configured core number %d\n", node, c->phys_proc_id); -} - -/* * cpu_init() initializes state that is per-CPU. Some data is already * initialized (naturally) in the bootstrap process, such as the GDT * and IDT. We reload them nevertheless, this function acts as a diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c index 73d08ed98a6..b8f3653dddb 100644 --- a/arch/x86/kernel/cpu/intel_cacheinfo.c +++ b/arch/x86/kernel/cpu/intel_cacheinfo.c @@ -433,14 +433,14 @@ int amd_set_l3_disable_slot(struct amd_northbridge *nb, int cpu, unsigned slot, /* check if @slot is already used or the index is already disabled */ ret = amd_get_l3_disable_slot(nb, slot); if (ret >= 0) - return -EINVAL; + return -EEXIST; if (index > nb->l3_cache.indices) return -EINVAL; /* check whether the other slot has disabled the same index already */ if (index == amd_get_l3_disable_slot(nb, !slot)) - return -EINVAL; + return -EEXIST; amd_l3_disable_index(nb, cpu, slot, index); @@ -468,8 +468,8 @@ static ssize_t store_cache_disable(struct _cpuid4_info *this_leaf, err = amd_set_l3_disable_slot(this_leaf->base.nb, cpu, slot, val); if (err) { if (err == -EEXIST) - printk(KERN_WARNING "L3 disable slot %d in use!\n", - slot); + pr_warning("L3 slot %d in use/index already disabled!\n", + slot); return err; } return count; diff --git a/arch/x86/kernel/i387.c b/arch/x86/kernel/i387.c index 7734bcbb5a3..2d6e6498c17 100644 --- a/arch/x86/kernel/i387.c +++ b/arch/x86/kernel/i387.c @@ -235,6 +235,7 @@ int init_fpu(struct task_struct *tsk) if (tsk_used_math(tsk)) { if (HAVE_HWFP && tsk == current) unlazy_fpu(tsk); + tsk->thread.fpu.last_cpu = ~0; return 0; } diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c index 73465aab28f..8a2ce8fd41c 100644 --- a/arch/x86/kernel/microcode_amd.c +++ b/arch/x86/kernel/microcode_amd.c @@ -82,11 +82,6 @@ static int collect_cpu_info_amd(int cpu, struct cpu_signature *csig) { struct cpuinfo_x86 *c = &cpu_data(cpu); - if (c->x86_vendor != X86_VENDOR_AMD || c->x86 < 0x10) { - pr_warning("CPU%d: family %d not supported\n", cpu, c->x86); - return -1; - } - csig->rev = c->microcode; pr_info("CPU%d: patch_level=0x%08x\n", cpu, csig->rev); @@ -380,6 +375,13 @@ static struct microcode_ops microcode_amd_ops = { struct microcode_ops * __init init_amd_microcode(void) { + struct cpuinfo_x86 *c = &cpu_data(0); + + if (c->x86_vendor != X86_VENDOR_AMD || c->x86 < 0x10) { + pr_warning("AMD CPU family 0x%x not supported\n", c->x86); + return NULL; + } + patch = (void *)get_zeroed_page(GFP_KERNEL); if (!patch) return NULL; diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c index 87a0f868830..c9bda6d6035 100644 --- a/arch/x86/kernel/microcode_core.c +++ b/arch/x86/kernel/microcode_core.c @@ -419,10 +419,8 @@ static int mc_device_add(struct device *dev, struct subsys_interface *sif) if (err) return err; - if (microcode_init_cpu(cpu) == UCODE_ERROR) { - sysfs_remove_group(&dev->kobj, &mc_attr_group); + if (microcode_init_cpu(cpu) == UCODE_ERROR) return -EINVAL; - } return err; } @@ -528,11 +526,11 @@ static int __init microcode_init(void) microcode_ops = init_intel_microcode(); else if (c->x86_vendor == X86_VENDOR_AMD) microcode_ops = init_amd_microcode(); - - if (!microcode_ops) { + else pr_err("no support for this CPU vendor\n"); + + if (!microcode_ops) return -ENODEV; - } microcode_pdev = platform_device_register_simple("microcode", -1, NULL, 0); diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c index e9f265fd79a..9cf71d0b2d3 100644 --- a/arch/x86/kernel/x86_init.c +++ b/arch/x86/kernel/x86_init.c @@ -93,7 +93,6 @@ struct x86_init_ops x86_init __initdata = { struct x86_cpuinit_ops x86_cpuinit __cpuinitdata = { .early_percpu_clock_init = x86_init_noop, .setup_percpu_clockev = setup_secondary_APIC_clock, - .fixup_cpu_id = x86_default_fixup_cpu_id, }; static void default_nmi_init(void) { }; diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 4044ce0bf7c..91a5e989abc 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -6336,13 +6336,11 @@ int kvm_arch_prepare_memory_region(struct kvm *kvm, if (npages && !old.rmap) { unsigned long userspace_addr; - down_write(¤t->mm->mmap_sem); - userspace_addr = do_mmap(NULL, 0, + userspace_addr = vm_mmap(NULL, 0, npages * PAGE_SIZE, PROT_READ | PROT_WRITE, map_flags, 0); - up_write(¤t->mm->mmap_sem); if (IS_ERR((void *)userspace_addr)) return PTR_ERR((void *)userspace_addr); @@ -6366,10 +6364,8 @@ void kvm_arch_commit_memory_region(struct kvm *kvm, if (!user_alloc && !old.user_alloc && old.rmap && !npages) { int ret; - down_write(¤t->mm->mmap_sem); - ret = do_munmap(current->mm, old.userspace_addr, + ret = vm_munmap(old.userspace_addr, old.npages * PAGE_SIZE); - up_write(¤t->mm->mmap_sem); if (ret < 0) printk(KERN_WARNING "kvm_vm_ioctl_set_memory_region: " diff --git a/arch/x86/platform/mrst/mrst.c b/arch/x86/platform/mrst/mrst.c index e0a37233c0a..e31bcd8f2ee 100644 --- a/arch/x86/platform/mrst/mrst.c +++ b/arch/x86/platform/mrst/mrst.c @@ -805,7 +805,7 @@ void intel_scu_devices_create(void) } else i2c_register_board_info(i2c_bus[i], i2c_devs[i], 1); } - intel_scu_notifier_post(SCU_AVAILABLE, 0L); + intel_scu_notifier_post(SCU_AVAILABLE, NULL); } EXPORT_SYMBOL_GPL(intel_scu_devices_create); @@ -814,7 +814,7 @@ void intel_scu_devices_destroy(void) { int i; - intel_scu_notifier_post(SCU_DOWN, 0L); + intel_scu_notifier_post(SCU_DOWN, NULL); for (i = 0; i < ipc_next_dev; i++) platform_device_del(ipc_devs[i]); diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 4f51bebac02..a8f8844b8d3 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -261,7 +261,8 @@ static void xen_cpuid(unsigned int *ax, unsigned int *bx, static bool __init xen_check_mwait(void) { -#ifdef CONFIG_ACPI +#if defined(CONFIG_ACPI) && !defined(CONFIG_ACPI_PROCESSOR_AGGREGATOR) && \ + !defined(CONFIG_ACPI_PROCESSOR_AGGREGATOR_MODULE) struct xen_platform_op op = { .cmd = XENPF_set_processor_pminfo, .u.set_pminfo.id = -1, @@ -349,7 +350,6 @@ static void __init xen_init_cpuid_mask(void) /* Xen will set CR4.OSXSAVE if supported and not disabled by force */ if ((cx & xsave_mask) != xsave_mask) cpuid_leaf1_ecx_mask &= ~xsave_mask; /* disable XSAVE & OSXSAVE */ - if (xen_check_mwait()) cpuid_leaf1_ecx_set_mask = (1 << (X86_FEATURE_MWAIT % 32)); } diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c index 5fac6919b95..0503c0c493a 100644 --- a/arch/x86/xen/smp.c +++ b/arch/x86/xen/smp.c @@ -178,6 +178,7 @@ static void __init xen_fill_possible_map(void) static void __init xen_filter_cpu_maps(void) { int i, rc; + unsigned int subtract = 0; if (!xen_initial_domain()) return; @@ -192,8 +193,22 @@ static void __init xen_filter_cpu_maps(void) } else { set_cpu_possible(i, false); set_cpu_present(i, false); + subtract++; } } +#ifdef CONFIG_HOTPLUG_CPU + /* This is akin to using 'nr_cpus' on the Linux command line. + * Which is OK as when we use 'dom0_max_vcpus=X' we can only + * have up to X, while nr_cpu_ids is greater than X. This + * normally is not a problem, except when CPU hotplugging + * is involved and then there might be more than X CPUs + * in the guest - which will not work as there is no + * hypercall to expand the max number of VCPUs an already + * running guest has. So cap it up to X. */ + if (subtract) + nr_cpu_ids = nr_cpu_ids - subtract; +#endif + } static void __init xen_smp_prepare_boot_cpu(void) diff --git a/arch/x86/xen/xen-asm.S b/arch/x86/xen/xen-asm.S index 79d7362ad6d..3e45aa00071 100644 --- a/arch/x86/xen/xen-asm.S +++ b/arch/x86/xen/xen-asm.S @@ -96,7 +96,7 @@ ENTRY(xen_restore_fl_direct) /* check for unmasked and pending */ cmpw $0x0001, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_pending - jz 1f + jnz 1f 2: call check_events 1: ENDPATCH(xen_restore_fl_direct) diff --git a/arch/xtensa/include/asm/hardirq.h b/arch/xtensa/include/asm/hardirq.h index 26664cef8f1..91695a13549 100644 --- a/arch/xtensa/include/asm/hardirq.h +++ b/arch/xtensa/include/asm/hardirq.h @@ -11,9 +11,6 @@ #ifndef _XTENSA_HARDIRQ_H #define _XTENSA_HARDIRQ_H -void ack_bad_irq(unsigned int irq); -#define ack_bad_irq ack_bad_irq - #include <asm-generic/hardirq.h> #endif /* _XTENSA_HARDIRQ_H */ diff --git a/arch/xtensa/include/asm/io.h b/arch/xtensa/include/asm/io.h index d04cd3a625f..4beb43c087d 100644 --- a/arch/xtensa/include/asm/io.h +++ b/arch/xtensa/include/asm/io.h @@ -14,6 +14,7 @@ #ifdef __KERNEL__ #include <asm/byteorder.h> #include <asm/page.h> +#include <linux/bug.h> #include <linux/kernel.h> #include <linux/types.h> diff --git a/arch/xtensa/kernel/signal.c b/arch/xtensa/kernel/signal.c index b69b000349f..d78869a00b1 100644 --- a/arch/xtensa/kernel/signal.c +++ b/arch/xtensa/kernel/signal.c @@ -496,6 +496,7 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset) signr = get_signal_to_deliver(&info, &ka, regs, NULL); if (signr > 0) { + int ret; /* Are we from a system call? */ |