diff options
Diffstat (limited to 'arch')
185 files changed, 2812 insertions, 5666 deletions
diff --git a/arch/alpha/kernel/vmlinux.lds.S b/arch/alpha/kernel/vmlinux.lds.S index 3d890a98a08..f937ad12385 100644 --- a/arch/alpha/kernel/vmlinux.lds.S +++ b/arch/alpha/kernel/vmlinux.lds.S @@ -39,7 +39,7 @@ SECTIONS __init_begin = ALIGN(PAGE_SIZE); INIT_TEXT_SECTION(PAGE_SIZE) INIT_DATA_SECTION(16) - PERCPU(L1_CACHE_BYTES, PAGE_SIZE) + PERCPU_SECTION(L1_CACHE_BYTES) /* Align to THREAD_SIZE rather than PAGE_SIZE here so any padding page needed for the THREAD_SIZE aligned init_task gets freed after init */ . = ALIGN(THREAD_SIZE); diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index f7cce8b75f4..f59758dd86c 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -294,6 +294,8 @@ config ARCH_AT91 bool "Atmel AT91" select ARCH_REQUIRE_GPIOLIB select HAVE_CLK + select CLKDEV_LOOKUP + select ARM_PATCH_PHYS_VIRT if MMU help This enables support for systems based on the Atmel AT91RM9200, AT91SAM9 and AT91CAP9 processors. diff --git a/arch/arm/configs/at572d940hfek_defconfig b/arch/arm/configs/at572d940hfek_defconfig deleted file mode 100644 index 1b1158ae8f8..00000000000 --- a/arch/arm/configs/at572d940hfek_defconfig +++ /dev/null @@ -1,358 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_LOCALVERSION="-AT572D940HF" -# CONFIG_LOCALVERSION_AUTO is not set -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_BSD_PROCESS_ACCT_V3=y -CONFIG_TASKSTATS=y -CONFIG_TASK_XACCT=y -CONFIG_TASK_IO_ACCOUNTING=y -CONFIG_AUDIT=y -CONFIG_CGROUPS=y -CONFIG_CGROUP_CPUACCT=y -CONFIG_CGROUP_SCHED=y -CONFIG_RT_GROUP_SCHED=y -CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_RELAY=y -CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_EXPERT=y -CONFIG_SLAB=y -CONFIG_PROFILING=y -CONFIG_OPROFILE=m -CONFIG_KPROBES=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT572D940HF=y -CONFIG_MACH_AT572D940HFEB=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_PREEMPT=y -CONFIG_CMDLINE="mem=48M console=ttyS0 initrd=0x21100000,3145728 root=/dev/ram0 rw ip=172.16.1.181" -CONFIG_KEXEC=y -CONFIG_FPE_NWFPE=y -CONFIG_FPE_NWFPE_XP=y -CONFIG_NET=y -CONFIG_PACKET=m -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -CONFIG_NET_PKTGEN=m -CONFIG_NET_TCPPROBE=m -CONFIG_CAN=m -CONFIG_CAN_RAW=m -CONFIG_CAN_BCM=m -CONFIG_CAN_VCAN=m -CONFIG_CAN_DEBUG_DEVICES=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_CONNECTOR=m -CONFIG_MTD=m -CONFIG_MTD_DEBUG=y -CONFIG_MTD_DEBUG_VERBOSE=1 -CONFIG_MTD_CONCAT=m -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CHAR=m -CONFIG_MTD_BLOCK=m -CONFIG_MTD_BLOCK_RO=m -CONFIG_FTL=m -CONFIG_NFTL=m -CONFIG_NFTL_RW=y -CONFIG_INFTL=m -CONFIG_RFD_FTL=m -CONFIG_SSFDC=m -CONFIG_MTD_OOPS=m -CONFIG_MTD_CFI=m -CONFIG_MTD_JEDECPROBE=m -CONFIG_MTD_CFI_INTELEXT=m -CONFIG_MTD_CFI_AMDSTD=m -CONFIG_MTD_CFI_STAA=m -CONFIG_MTD_ROM=m -CONFIG_MTD_ABSENT=m -CONFIG_MTD_COMPLEX_MAPPINGS=y -CONFIG_MTD_PHYSMAP=m -CONFIG_MTD_PLATRAM=m -CONFIG_MTD_DATAFLASH=m -CONFIG_MTD_M25P80=m -CONFIG_MTD_SLRAM=m -CONFIG_MTD_PHRAM=m -CONFIG_MTD_MTDRAM=m -CONFIG_MTD_BLOCK2MTD=m -CONFIG_MTD_NAND=m -CONFIG_MTD_NAND_VERIFY_WRITE=y -CONFIG_MTD_NAND_DISKONCHIP=m -CONFIG_MTD_NAND_NANDSIM=m -CONFIG_MTD_NAND_PLATFORM=m -CONFIG_MTD_ALAUDA=m -CONFIG_MTD_UBI=m -CONFIG_MTD_UBI_GLUEBI=m -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_CRYPTOLOOP=m -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=65536 -CONFIG_ATMEL_TCLIB=y -CONFIG_ATMEL_SSC=m -CONFIG_SENSORS_TSL2550=m -CONFIG_DS1682=m -CONFIG_RAID_ATTRS=m -CONFIG_SCSI=m -CONFIG_SCSI_TGT=m -# CONFIG_SCSI_PROC_FS is not set -CONFIG_BLK_DEV_SD=m -CONFIG_BLK_DEV_SR=m -CONFIG_CHR_DEV_SG=m -CONFIG_CHR_DEV_SCH=m -CONFIG_SCSI_MULTI_LUN=y -CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_LOGGING=y -CONFIG_SCSI_SCAN_ASYNC=y -CONFIG_SCSI_ISCSI_ATTRS=m -CONFIG_NETDEVICES=y -CONFIG_DUMMY=m -CONFIG_BONDING=m -CONFIG_MACVLAN=m -CONFIG_EQUALIZER=m -CONFIG_TUN=m -CONFIG_VETH=m -CONFIG_PHYLIB=y -CONFIG_MARVELL_PHY=m -CONFIG_DAVICOM_PHY=m -CONFIG_QSEMI_PHY=m -CONFIG_LXT_PHY=m -CONFIG_CICADA_PHY=m -CONFIG_VITESSE_PHY=m -CONFIG_SMSC_PHY=m -CONFIG_BROADCOM_PHY=m -CONFIG_ICPLUS_PHY=m -CONFIG_MDIO_BITBANG=m -CONFIG_NET_ETHERNET=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -CONFIG_USB_ZD1201=m -CONFIG_HOSTAP=m -CONFIG_HOSTAP_FIRMWARE=y -CONFIG_HOSTAP_FIRMWARE_NVRAM=y -CONFIG_USB_CATC=m -CONFIG_USB_KAWETH=m -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_USBNET=m -CONFIG_USB_NET_DM9601=m -CONFIG_USB_NET_GL620A=m -CONFIG_USB_NET_PLUSB=m -CONFIG_USB_NET_MCS7830=m -CONFIG_USB_NET_RNDIS_HOST=m -CONFIG_USB_ALI_M5632=y -CONFIG_USB_AN2720=y -CONFIG_USB_EPSON2888=y -CONFIG_USB_KC2190=y -# CONFIG_USB_NET_ZAURUS is not set -CONFIG_INPUT_MOUSEDEV=m -CONFIG_INPUT_EVDEV=m -CONFIG_INPUT_EVBUG=m -CONFIG_KEYBOARD_LKKBD=m -CONFIG_KEYBOARD_GPIO=m -CONFIG_KEYBOARD_NEWTON=m -CONFIG_KEYBOARD_STOWAWAY=m -CONFIG_KEYBOARD_SUNKBD=m -CONFIG_KEYBOARD_XTKBD=m -CONFIG_MOUSE_PS2=m -CONFIG_MOUSE_SERIAL=m -CONFIG_MOUSE_APPLETOUCH=m -CONFIG_MOUSE_VSXXXAA=m -CONFIG_MOUSE_GPIO=m -CONFIG_INPUT_MISC=y -CONFIG_INPUT_UINPUT=m -CONFIG_SERIO_SERPORT=m -CONFIG_SERIO_RAW=m -CONFIG_VT_HW_CONSOLE_BINDING=y -CONFIG_SERIAL_NONSTANDARD=y -CONFIG_N_HDLC=m -CONFIG_SPECIALIX=m -CONFIG_STALDRV=y -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_IPMI_HANDLER=m -CONFIG_IPMI_DEVICE_INTERFACE=m -CONFIG_IPMI_SI=m -CONFIG_IPMI_WATCHDOG=m -CONFIG_IPMI_POWEROFF=m -CONFIG_HW_RANDOM=y -CONFIG_R3964=m -CONFIG_RAW_DRIVER=m -CONFIG_TCG_TPM=m -CONFIG_TCG_NSC=m -CONFIG_TCG_ATMEL=m -CONFIG_I2C=m -CONFIG_I2C_CHARDEV=m -CONFIG_SPI=y -CONFIG_SPI_ATMEL=y -CONFIG_SPI_BITBANG=m -CONFIG_SPI_SPIDEV=m -# CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set -CONFIG_SOUND=m -CONFIG_SND=m -CONFIG_SND_SEQUENCER=m -CONFIG_SND_SEQ_DUMMY=m -CONFIG_SND_MIXER_OSS=m -CONFIG_SND_PCM_OSS=m -# CONFIG_SND_PCM_OSS_PLUGINS is not set -CONFIG_SND_SEQUENCER_OSS=y -CONFIG_SND_DYNAMIC_MINORS=y -# CONFIG_SND_VERBOSE_PROCFS is not set -CONFIG_SND_DUMMY=m -CONFIG_SND_VIRMIDI=m -CONFIG_SND_USB_AUDIO=m -CONFIG_SND_USB_CAIAQ=m -CONFIG_SND_USB_CAIAQ_INPUT=y -CONFIG_HID=m -CONFIG_HIDRAW=y -CONFIG_USB_HID=m -CONFIG_USB_HIDDEV=y -CONFIG_USB_KBD=m -CONFIG_USB_MOUSE=m -CONFIG_HID_A4TECH=m -CONFIG_HID_APPLE=m -CONFIG_HID_BELKIN=m -CONFIG_HID_CHERRY=m -CONFIG_HID_CHICONY=m -CONFIG_HID_CYPRESS=m -CONFIG_HID_EZKEY=m -CONFIG_HID_GYRATION=m -CONFIG_HID_LOGITECH=m -CONFIG_HID_MICROSOFT=m -CONFIG_HID_MONTEREY=m -CONFIG_HID_PANTHERLORD=m -CONFIG_HID_PETALYNX=m -CONFIG_HID_SAMSUNG=m -CONFIG_HID_SONY=m -CONFIG_HID_SUNPLUS=m -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_DEVICE_CLASS is not set -CONFIG_USB_DYNAMIC_MINORS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=m -CONFIG_USB_STORAGE_DATAFAB=m -CONFIG_USB_STORAGE_FREECOM=m -CONFIG_USB_STORAGE_ISD200=m -CONFIG_USB_STORAGE_USBAT=m -CONFIG_USB_STORAGE_SDDR09=m -CONFIG_USB_STORAGE_SDDR55=m -CONFIG_USB_STORAGE_JUMPSHOT=m -CONFIG_USB_STORAGE_ALAUDA=m -CONFIG_USB_STORAGE_KARMA=m -CONFIG_USB_LIBUSUAL=y -CONFIG_USB_SERIAL=m -CONFIG_USB_EZUSB=y -CONFIG_USB_SERIAL_GENERIC=y -CONFIG_USB_SERIAL_PL2303=m -CONFIG_USB_SERIAL_SPCP8X5=m -CONFIG_USB_SERIAL_DEBUG=m -CONFIG_USB_EMI62=m -CONFIG_USB_EMI26=m -CONFIG_USB_ADUTUX=m -CONFIG_USB_TEST=m -CONFIG_USB_GADGET=m -CONFIG_USB_GADGET_DEBUG_FILES=y -CONFIG_USB_GADGET_DEBUG_FS=y -CONFIG_USB_ZERO=m -CONFIG_USB_ETH=m -CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m -CONFIG_USB_G_SERIAL=m -CONFIG_USB_MIDI_GADGET=m -CONFIG_MMC=y -CONFIG_SDIO_UART=m -CONFIG_MMC_AT91=m -CONFIG_MMC_SPI=m -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=m -CONFIG_LEDS_GPIO=m -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=m -CONFIG_LEDS_TRIGGER_HEARTBEAT=m -CONFIG_RTC_CLASS=y -CONFIG_RTC_INTF_DEV_UIE_EMUL=y -CONFIG_RTC_DRV_DS1307=m -CONFIG_RTC_DRV_DS1305=y -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -CONFIG_EXT2_FS_SECURITY=y -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_POSIX_ACL=y -CONFIG_EXT3_FS_SECURITY=y -CONFIG_JBD_DEBUG=y -CONFIG_REISERFS_FS=m -CONFIG_REISERFS_CHECK=y -CONFIG_REISERFS_PROC_INFO=y -CONFIG_REISERFS_FS_XATTR=y -CONFIG_REISERFS_FS_POSIX_ACL=y -CONFIG_REISERFS_FS_SECURITY=y -CONFIG_INOTIFY=y -CONFIG_FUSE_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=y -CONFIG_NTFS_FS=m -CONFIG_NTFS_RW=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -CONFIG_JFFS2_FS=m -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_JFFS2_LZO=y -CONFIG_JFFS2_CMODE_FAVOURLZO=y -CONFIG_CRAMFS=m -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -CONFIG_NFSD=m -CONFIG_NFSD_V3_ACL=y -CONFIG_NFSD_V4=y -CONFIG_CIFS=m -CONFIG_CIFS_WEAK_PW_HASH=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAC_PARTITION=y -CONFIG_BSD_DISKLABEL=y -CONFIG_MINIX_SUBPARTITION=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_LDM_PARTITION=y -CONFIG_LDM_DEBUG=y -CONFIG_SGI_PARTITION=y -CONFIG_SUN_PARTITION=y -CONFIG_NLS_DEFAULT="cp437" -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_ASCII=y -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_UTF8=m -CONFIG_DLM=m -CONFIG_PRINTK_TIME=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_UNUSED_SYMBOLS=y -CONFIG_DEBUG_FS=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_CRYPTO=y -CONFIG_CRYPTO_GF128MUL=m -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_MD5=y -# CONFIG_CRYPTO_ANSI_CPRNG is not set -# CONFIG_CRYPTO_HW is not set -CONFIG_CRC_CCITT=m -CONFIG_CRC16=m diff --git a/arch/arm/configs/at91sam9261ek_defconfig b/arch/arm/configs/at91sam9261_defconfig index b46025b66b6..ade6b2f2311 100644 --- a/arch/arm/configs/at91sam9261ek_defconfig +++ b/arch/arm/configs/at91sam9261_defconfig @@ -1,9 +1,13 @@ CONFIG_EXPERIMENTAL=y # CONFIG_LOCALVERSION_AUTO is not set +CONFIG_KERNEL_LZMA=y # CONFIG_SWAP is not set CONFIG_SYSVIPC=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y +CONFIG_NAMESPACES=y +CONFIG_EMBEDDED=y CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y @@ -15,18 +19,27 @@ CONFIG_ARCH_AT91SAM9261=y CONFIG_MACH_AT91SAM9261EK=y CONFIG_AT91_PROGRAMMABLE_CLOCKS=y # CONFIG_ARM_THUMB is not set +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y +CONFIG_AUTO_ZRELADDR=y +CONFIG_VFP=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_INET=y +CONFIG_IP_MULTICAST=y CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_LRO is not set # CONFIG_IPV6 is not set +CONFIG_CFG80211=y +CONFIG_LIB80211=y +CONFIG_MAC80211=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y CONFIG_MTD_PARTITIONS=y @@ -34,8 +47,12 @@ CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_ATMEL=y +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_GLUEBI=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_MISC_DEVICES=y +CONFIG_ATMEL_TCLIB=y CONFIG_ATMEL_SSC=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y @@ -45,12 +62,27 @@ CONFIG_NET_ETHERNET=y CONFIG_DM9000=y # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set +CONFIG_USB_ZD1201=m +CONFIG_RTL8187=m +CONFIG_LIBERTAS=m +CONFIG_LIBERTAS_USB=m +CONFIG_LIBERTAS_SDIO=m +CONFIG_LIBERTAS_SPI=m +CONFIG_RT2X00=m +CONFIG_RT2500USB=m +CONFIG_RT73USB=m +CONFIG_ZD1211RW=m +CONFIG_INPUT_POLLDEV=m # CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=240 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320 +CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ADS7846=y +CONFIG_DEVPTS_MULTIPLE_INSTANCES=y CONFIG_SERIAL_ATMEL=y CONFIG_SERIAL_ATMEL_CONSOLE=y CONFIG_HW_RANDOM=y @@ -65,31 +97,62 @@ CONFIG_WATCHDOG_NOWAYOUT=y CONFIG_AT91SAM9X_WATCHDOG=y CONFIG_FB=y CONFIG_FB_ATMEL=y -# CONFIG_VGA_CONSOLE is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_ATMEL_LCDC=y +# CONFIG_BACKLIGHT_GENERIC is not set +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +CONFIG_LOGO=y +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_SEQUENCER=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +# CONFIG_SND_SUPPORT_OLD_API is not set +# CONFIG_SND_VERBOSE_PROCFS is not set +# CONFIG_SND_DRIVERS is not set +# CONFIG_SND_ARM is not set +CONFIG_SND_AT73C213=y +CONFIG_SND_USB_AUDIO=m # CONFIG_USB_HID is not set CONFIG_USB=y CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_STORAGE=y -CONFIG_USB_STORAGE_DEBUG=y CONFIG_USB_GADGET=y CONFIG_USB_ZERO=m +CONFIG_USB_ETH=m CONFIG_USB_GADGETFS=m CONFIG_USB_FILE_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_MMC=y CONFIG_MMC_AT91=m +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_GPIO=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AT91SAM9=y -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y +CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y -CONFIG_CRAMFS=y +CONFIG_UBIFS_FS=y +CONFIG_UBIFS_FS_ADVANCED_COMPR=y +CONFIG_SQUASHFS=y +CONFIG_SQUASHFS_LZO=y +CONFIG_SQUASHFS_XZ=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_ISO8859_1=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y +CONFIG_NLS_ISO8859_15=y +CONFIG_NLS_UTF8=y +CONFIG_FTRACE=y +CONFIG_CRC_CCITT=m diff --git a/arch/arm/configs/at91sam9263ek_defconfig b/arch/arm/configs/at91sam9263_defconfig index 8a04d6f4e06..1cf96264cba 100644 --- a/arch/arm/configs/at91sam9263ek_defconfig +++ b/arch/arm/configs/at91sam9263_defconfig @@ -1,9 +1,13 @@ CONFIG_EXPERIMENTAL=y # CONFIG_LOCALVERSION_AUTO is not set +CONFIG_KERNEL_LZMA=y # CONFIG_SWAP is not set CONFIG_SYSVIPC=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y +CONFIG_NAMESPACES=y +CONFIG_EMBEDDED=y CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y @@ -13,53 +17,81 @@ CONFIG_MODULE_UNLOAD=y CONFIG_ARCH_AT91=y CONFIG_ARCH_AT91SAM9263=y CONFIG_MACH_AT91SAM9263EK=y +CONFIG_MACH_USB_A9263=y +CONFIG_MACH_NEOCORE926=y CONFIG_MTD_AT91_DATAFLASH_CARD=y # CONFIG_ARM_THUMB is not set +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y +CONFIG_AUTO_ZRELADDR=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y +CONFIG_NET_KEY=y CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_IP_ROUTE_VERBOSE=y CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y +CONFIG_NET_IPIP=y +CONFIG_IP_MROUTE=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set +CONFIG_IPV6=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y +CONFIG_NFTL=y +CONFIG_NFTL_RW=y CONFIG_MTD_DATAFLASH=y +CONFIG_MTD_BLOCK2MTD=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_ATMEL=y +CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_GLUEBI=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_ATMEL_SSC=y +CONFIG_MISC_DEVICES=y +CONFIG_ATMEL_PWM=y +CONFIG_ATMEL_TCLIB=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_SCSI_MULTI_LUN=y CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y CONFIG_MII=y +CONFIG_SMSC_PHY=y +CONFIG_NET_ETHERNET=y CONFIG_MACB=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +CONFIG_USB_ZD1201=m +CONFIG_INPUT_POLLDEV=m # CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=240 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320 CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ADS7846=y -# CONFIG_SERIO is not set +CONFIG_LEGACY_PTY_COUNT=4 CONFIG_SERIAL_ATMEL=y CONFIG_SERIAL_ATMEL_CONSOLE=y CONFIG_HW_RANDOM=y @@ -74,8 +106,25 @@ CONFIG_WATCHDOG_NOWAYOUT=y CONFIG_AT91SAM9X_WATCHDOG=y CONFIG_FB=y CONFIG_FB_ATMEL=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_USB_HID is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_ATMEL_LCDC=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +CONFIG_LOGO=y +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_SEQUENCER=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +# CONFIG_SND_SUPPORT_OLD_API is not set +# CONFIG_SND_VERBOSE_PROCFS is not set +# CONFIG_SND_DRIVERS is not set +# CONFIG_SND_ARM is not set +CONFIG_SND_ATMEL_AC97C=y +# CONFIG_SND_SPI is not set +CONFIG_SND_USB_AUDIO=m CONFIG_USB=y CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y @@ -83,24 +132,37 @@ CONFIG_USB_OHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_ZERO=m +CONFIG_USB_ETH=m CONFIG_USB_GADGETFS=m CONFIG_USB_FILE_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_MMC=y +CONFIG_SDIO_UART=m CONFIG_MMC_AT91=m +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_ATMEL_PWM=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AT91SAM9=y CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y +CONFIG_FUSE_FS=m CONFIG_VFAT_FS=y CONFIG_TMPFS=y CONFIG_JFFS2_FS=y +CONFIG_UBIFS_FS=y +CONFIG_UBIFS_FS_ADVANCED_COMPR=y CONFIG_CRAMFS=y CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_ISO8859_1=y -CONFIG_DEBUG_KERNEL=y +CONFIG_FTRACE=y CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y +CONFIG_XZ_DEC=y diff --git a/arch/arm/configs/neocore926_defconfig b/arch/arm/configs/neocore926_defconfig deleted file mode 100644 index 462dd1850d1..00000000000 --- a/arch/arm/configs/neocore926_defconfig +++ /dev/null @@ -1,104 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_BLK_DEV_INITRD=y -# CONFIG_COMPAT_BRK is not set -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91SAM9263=y -CONFIG_MACH_NEOCORE926=y -CONFIG_MTD_AT91_DATAFLASH_CARD=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_NET_KEY=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -CONFIG_NET_IPIP=y -# CONFIG_INET_LRO is not set -CONFIG_IPV6=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_PREVENT_FIRMWARE_BUILD is not set -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_NFTL=y -CONFIG_NFTL_RW=y -CONFIG_MTD_BLOCK2MTD=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ECC_SMC=y -CONFIG_MTD_NAND_VERIFY_WRITE=y -CONFIG_MTD_NAND_ATMEL=y -CONFIG_MTD_NAND_PLATFORM=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_NBD=y -CONFIG_ATMEL_PWM=y -CONFIG_ATMEL_TCLIB=y -CONFIG_SCSI=y -CONFIG_CHR_DEV_SG=y -CONFIG_NETDEVICES=y -CONFIG_SMSC_PHY=y -CONFIG_NET_ETHERNET=y -CONFIG_MACB=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_EVDEV=y -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_ADS7846=y -CONFIG_VT_HW_CONSOLE_BINDING=y -# CONFIG_DEVKMEM is not set -CONFIG_SERIAL_NONSTANDARD=y -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -# CONFIG_SERIAL_ATMEL_PDC is not set -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_SPI=y -CONFIG_SPI_ATMEL=y -# CONFIG_HWMON is not set -CONFIG_VIDEO_OUTPUT_CONTROL=y -CONFIG_FB=y -CONFIG_FB_ATMEL=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_LCD_CLASS_DEVICE=y -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_BACKLIGHT_ATMEL_LCDC=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y -CONFIG_LOGO=y -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_MMC=y -CONFIG_SDIO_UART=y -CONFIG_MMC_AT91=m -CONFIG_EXT2_FS=y -# CONFIG_DNOTIFY is not set -CONFIG_AUTOFS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_WBUF_VERIFY=y -CONFIG_NFS_FS=y -CONFIG_ROOT_NFS=y -# CONFIG_ENABLE_WARN_DEPRECATED is not set -# CONFIG_ENABLE_MUST_CHECK is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y -# CONFIG_CRYPTO_HW is not set diff --git a/arch/arm/configs/usb-a9263_defconfig b/arch/arm/configs/usb-a9263_defconfig deleted file mode 100644 index ee82d09249c..00000000000 --- a/arch/arm/configs/usb-a9263_defconfig +++ /dev/null @@ -1,106 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91SAM9263=y -CONFIG_MACH_USB_A9263=y -CONFIG_AT91_SLOW_CLOCK=y -# CONFIG_ARM_THUMB is not set -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=64M console=ttyS0,115200" -CONFIG_FPE_NWFPE=y -CONFIG_PM=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -CONFIG_IP_MROUTE=y -CONFIG_IP_PIMSM_V1=y -CONFIG_IP_PIMSM_V2=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_DATAFLASH=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ATMEL=y -CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y -CONFIG_BLK_DEV_LOOP=y -# CONFIG_MISC_DEVICES is not set -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_MACB=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_EVDEV=y -CONFIG_INPUT_EVBUG=y -# CONFIG_KEYBOARD_ATKBD is not set -CONFIG_KEYBOARD_GPIO=y -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_HW_RANDOM=y -CONFIG_SPI=y -CONFIG_SPI_ATMEL=y -# CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_USB_ETH=m -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y -CONFIG_FUSE_FS=m -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_850=y -CONFIG_NLS_ISO8859_1=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y -# CONFIG_CRYPTO_HW is not set diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index b4348e62ef0..e5287f21bad 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -82,7 +82,7 @@ SECTIONS #endif } - PERCPU(32, PAGE_SIZE) + PERCPU_SECTION(32) #ifndef CONFIG_XIP_KERNEL . = ALIGN(PAGE_SIZE); diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 2d299bf5d72..22484670e7b 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -3,9 +3,6 @@ if ARCH_AT91 config HAVE_AT91_DATAFLASH_CARD bool -config HAVE_NAND_ATMEL_BUSWIDTH_16 - bool - config HAVE_AT91_USART3 bool @@ -85,11 +82,6 @@ config ARCH_AT91CAP9 select HAVE_FB_ATMEL select HAVE_NET_MACB -config ARCH_AT572D940HF - bool "AT572D940HF" - select CPU_ARM926T - select GENERIC_CLOCKEVENTS - config ARCH_AT91X40 bool "AT91x40" select ARCH_USES_GETTIMEOFFSET @@ -209,7 +201,6 @@ comment "AT91SAM9260 / AT91SAM9XE Board Type" config MACH_AT91SAM9260EK bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit" select HAVE_AT91_DATAFLASH_CARD - select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933> @@ -270,7 +261,6 @@ comment "AT91SAM9261 Board Type" config MACH_AT91SAM9261EK bool "Atmel AT91SAM9261-EK Evaluation Kit" select HAVE_AT91_DATAFLASH_CARD - select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit. <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820> @@ -286,7 +276,6 @@ comment "AT91SAM9G10 Board Type" config MACH_AT91SAM9G10EK bool "Atmel AT91SAM9G10-EK Evaluation Kit" select HAVE_AT91_DATAFLASH_CARD - select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit. <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588> @@ -302,7 +291,6 @@ comment "AT91SAM9263 Board Type" config MACH_AT91SAM9263EK bool "Atmel AT91SAM9263-EK Evaluation Kit" select HAVE_AT91_DATAFLASH_CARD - select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit. <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057> @@ -343,7 +331,6 @@ comment "AT91SAM9G20 Board Type" config MACH_AT91SAM9G20EK bool "Atmel AT91SAM9G20-EK Evaluation Kit" select HAVE_AT91_DATAFLASH_CARD - select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit that embeds only one SD/MMC slot. @@ -351,7 +338,6 @@ config MACH_AT91SAM9G20EK config MACH_AT91SAM9G20EK_2MMC depends on MACH_AT91SAM9G20EK bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots" - select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and @@ -416,7 +402,6 @@ comment "AT91SAM9G45 Board Type" config MACH_AT91SAM9M10G45EK bool "Atmel AT91SAM9M10G45-EK Evaluation Kits" - select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using Atmel's AT91SAM9G45-EKES Evaluation Kit. "ES" at the end of the name means that this board is an @@ -433,7 +418,6 @@ comment "AT91CAP9 Board Type" config MACH_AT91CAP9ADK bool "Atmel AT91CAP9A-DK Evaluation Kit" select HAVE_AT91_DATAFLASH_CARD - select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using Atmel's AT91CAP9A-DK Evaluation Kit. <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4138> @@ -442,23 +426,6 @@ endif # ---------------------------------------------------------- -if ARCH_AT572D940HF - -comment "AT572D940HF Board Type" - -config MACH_AT572D940HFEB - bool "AT572D940HF-EK" - depends on ARCH_AT572D940HF - select HAVE_AT91_DATAFLASH_CARD - select HAVE_NAND_ATMEL_BUSWIDTH_16 - help - Select this if you are using Atmel's AT572D940HF-EK evaluation kit. - <http://www.atmel.com/products/diopsis/default.asp> - -endif - -# ---------------------------------------------------------- - if ARCH_AT91X40 comment "AT91X40 Board Type" @@ -483,13 +450,6 @@ config MTD_AT91_DATAFLASH_CARD help Enable support for the DataFlash card. -config MTD_NAND_ATMEL_BUSWIDTH_16 - bool "Enable 16-bit data bus interface to NAND flash" - depends on HAVE_NAND_ATMEL_BUSWIDTH_16 - help - On AT91SAM926x boards both types of NAND flash can be present - (8 and 16 bit data bus width). - # ---------------------------------------------------------- comment "AT91 Feature Selections" diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index a83835e0c18..96966231920 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -19,7 +19,6 @@ obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl.o at91sam926x_time.o at91sam9rl_devi obj-$(CONFIG_ARCH_AT91SAM9G20) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o at91sam9_alt_reset.o obj-$(CONFIG_ARCH_AT91SAM9G45) += at91sam9g45.o at91sam926x_time.o at91sam9g45_devices.o sam9_smc.o obj-$(CONFIG_ARCH_AT91CAP9) += at91cap9.o at91sam926x_time.o at91cap9_devices.o sam9_smc.o -obj-$(CONFIG_ARCH_AT572D940HF) += at572d940hf.o at91sam926x_time.o at572d940hf_devices.o sam9_smc.o obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o # AT91RM9200 board-specific support @@ -78,9 +77,6 @@ obj-$(CONFIG_MACH_AT91SAM9M10G45EK) += board-sam9m10g45ek.o # AT91CAP9 board-specific support obj-$(CONFIG_MACH_AT91CAP9ADK) += board-cap9adk.o -# AT572D940HF board-specific support -obj-$(CONFIG_MACH_AT572D940HFEB) += board-at572d940hf_ek.o - # AT91X40 board-specific support obj-$(CONFIG_MACH_AT91EB01) += board-eb01.o diff --git a/arch/arm/mach-at91/at572d940hf.c b/arch/arm/mach-at91/at572d940hf.c deleted file mode 100644 index a6b9c68c003..00000000000 --- a/arch/arm/mach-at91/at572d940hf.c +++ /dev/null @@ -1,377 +0,0 @@ -/* - * arch/arm/mach-at91/at572d940hf.c - * - * Antonio R. Costa <costa.antonior@gmail.com> - * Copyright (C) 2008 Atmel - * - * Copyright (C) 2005 SAN People - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#include <linux/module.h> - -#include <asm/mach/irq.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <mach/at572d940hf.h> -#include <mach/at91_pmc.h> -#include <mach/at91_rstc.h> - -#include "generic.h" -#include "clock.h" - -static struct map_desc at572d940hf_io_desc[] __initdata = { - { - .virtual = AT91_VA_BASE_SYS, - .pfn = __phys_to_pfn(AT91_BASE_SYS), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = AT91_IO_VIRT_BASE - AT572D940HF_SRAM_SIZE, - .pfn = __phys_to_pfn(AT572D940HF_SRAM_BASE), - .length = AT572D940HF_SRAM_SIZE, - .type = MT_DEVICE, - }, -}; - -/* -------------------------------------------------------------------- - * Clocks - * -------------------------------------------------------------------- */ - -/* - * The peripheral clocks. - */ -static struct clk pioA_clk = { - .name = "pioA_clk", - .pmc_mask = 1 << AT572D940HF_ID_PIOA, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk pioB_clk = { - .name = "pioB_clk", - .pmc_mask = 1 << AT572D940HF_ID_PIOB, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk pioC_clk = { - .name = "pioC_clk", - .pmc_mask = 1 << AT572D940HF_ID_PIOC, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk macb_clk = { - .name = "macb_clk", - .pmc_mask = 1 << AT572D940HF_ID_EMAC, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart0_clk = { - .name = "usart0_clk", - .pmc_mask = 1 << AT572D940HF_ID_US0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart1_clk = { - .name = "usart1_clk", - .pmc_mask = 1 << AT572D940HF_ID_US1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart2_clk = { - .name = "usart2_clk", - .pmc_mask = 1 << AT572D940HF_ID_US2, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk mmc_clk = { - .name = "mci_clk", - .pmc_mask = 1 << AT572D940HF_ID_MCI, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk udc_clk = { - .name = "udc_clk", - .pmc_mask = 1 << AT572D940HF_ID_UDP, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk twi0_clk = { - .name = "twi0_clk", - .pmc_mask = 1 << AT572D940HF_ID_TWI0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk spi0_clk = { - .name = "spi0_clk", - .pmc_mask = 1 << AT572D940HF_ID_SPI0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk spi1_clk = { - .name = "spi1_clk", - .pmc_mask = 1 << AT572D940HF_ID_SPI1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ssc0_clk = { - .name = "ssc0_clk", - .pmc_mask = 1 << AT572D940HF_ID_SSC0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ssc1_clk = { - .name = "ssc1_clk", - .pmc_mask = 1 << AT572D940HF_ID_SSC1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ssc2_clk = { - .name = "ssc2_clk", - .pmc_mask = 1 << AT572D940HF_ID_SSC2, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk tc0_clk = { - .name = "tc0_clk", - .pmc_mask = 1 << AT572D940HF_ID_TC0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk tc1_clk = { - .name = "tc1_clk", - .pmc_mask = 1 << AT572D940HF_ID_TC1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk tc2_clk = { - .name = "tc2_clk", - .pmc_mask = 1 << AT572D940HF_ID_TC2, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ohci_clk = { - .name = "ohci_clk", - .pmc_mask = 1 << AT572D940HF_ID_UHP, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ssc3_clk = { - .name = "ssc3_clk", - .pmc_mask = 1 << AT572D940HF_ID_SSC3, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk twi1_clk = { - .name = "twi1_clk", - .pmc_mask = 1 << AT572D940HF_ID_TWI1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk can0_clk = { - .name = "can0_clk", - .pmc_mask = 1 << AT572D940HF_ID_CAN0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk can1_clk = { - .name = "can1_clk", - .pmc_mask = 1 << AT572D940HF_ID_CAN1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk mAgicV_clk = { - .name = "mAgicV_clk", - .pmc_mask = 1 << AT572D940HF_ID_MSIRQ0, - .type = CLK_TYPE_PERIPHERAL, -}; - - -static struct clk *periph_clocks[] __initdata = { - &pioA_clk, - &pioB_clk, - &pioC_clk, - &macb_clk, - &usart0_clk, - &usart1_clk, - &usart2_clk, - &mmc_clk, - &udc_clk, - &twi0_clk, - &spi0_clk, - &spi1_clk, - &ssc0_clk, - &ssc1_clk, - &ssc2_clk, - &tc0_clk, - &tc1_clk, - &tc2_clk, - &ohci_clk, - &ssc3_clk, - &twi1_clk, - &can0_clk, - &can1_clk, - &mAgicV_clk, - /* irq0 .. irq2 */ -}; - -/* - * The five programmable clocks. - * You must configure pin multiplexing to bring these signals out. - */ -static struct clk pck0 = { - .name = "pck0", - .pmc_mask = AT91_PMC_PCK0, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 0, -}; -static struct clk pck1 = { - .name = "pck1", - .pmc_mask = AT91_PMC_PCK1, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 1, -}; -static struct clk pck2 = { - .name = "pck2", - .pmc_mask = AT91_PMC_PCK2, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 2, -}; -static struct clk pck3 = { - .name = "pck3", - .pmc_mask = AT91_PMC_PCK3, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 3, -}; - -static struct clk mAgicV_mem_clk = { - .name = "mAgicV_mem_clk", - .pmc_mask = AT91_PMC_PCK4, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 4, -}; - -/* HClocks */ -static struct clk hck0 = { - .name = "hck0", - .pmc_mask = AT91_PMC_HCK0, - .type = CLK_TYPE_SYSTEM, - .id = 0, -}; -static struct clk hck1 = { - .name = "hck1", - .pmc_mask = AT91_PMC_HCK1, - .type = CLK_TYPE_SYSTEM, - .id = 1, -}; - -static void __init at572d940hf_register_clocks(void) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) - clk_register(periph_clocks[i]); - - clk_register(&pck0); - clk_register(&pck1); - clk_register(&pck2); - clk_register(&pck3); - clk_register(&mAgicV_mem_clk); - - clk_register(&hck0); - clk_register(&hck1); -} - -/* -------------------------------------------------------------------- - * GPIO - * -------------------------------------------------------------------- */ - -static struct at91_gpio_bank at572d940hf_gpio[] = { - { - .id = AT572D940HF_ID_PIOA, - .offset = AT91_PIOA, - .clock = &pioA_clk, - }, { - .id = AT572D940HF_ID_PIOB, - .offset = AT91_PIOB, - .clock = &pioB_clk, - }, { - .id = AT572D940HF_ID_PIOC, - .offset = AT91_PIOC, - .clock = &pioC_clk, - } -}; - -static void at572d940hf_reset(void) -{ - at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST); -} - - -/* -------------------------------------------------------------------- - * AT572D940HF processor initialization - * -------------------------------------------------------------------- */ - -void __init at572d940hf_initialize(unsigned long main_clock) -{ - /* Map peripherals */ - iotable_init(at572d940hf_io_desc, ARRAY_SIZE(at572d940hf_io_desc)); - - at91_arch_reset = at572d940hf_reset; - at91_extern_irq = (1 << AT572D940HF_ID_IRQ0) | (1 << AT572D940HF_ID_IRQ1) - | (1 << AT572D940HF_ID_IRQ2); - - /* Init clock subsystem */ - at91_clock_init(main_clock); - - /* Register the processor-specific clocks */ - at572d940hf_register_clocks(); - - /* Register GPIO subsystem */ - at91_gpio_init(at572d940hf_gpio, 3); -} - -/* -------------------------------------------------------------------- - * Interrupt initialization - * -------------------------------------------------------------------- */ - -/* - * The default interrupt priority levels (0 = lowest, 7 = highest). - */ -static unsigned int at572d940hf_default_irq_priority[NR_AIC_IRQS] __initdata = { - 7, /* Advanced Interrupt Controller */ - 7, /* System Peripherals */ - 0, /* Parallel IO Controller A */ - 0, /* Parallel IO Controller B */ - 0, /* Parallel IO Controller C */ - 3, /* Ethernet */ - 6, /* USART 0 */ - 6, /* USART 1 */ - 6, /* USART 2 */ - 0, /* Multimedia Card Interface */ - 4, /* USB Device Port */ - 0, /* Two-Wire Interface 0 */ - 6, /* Serial Peripheral Interface 0 */ - 6, /* Serial Peripheral Interface 1 */ - 5, /* Serial Synchronous Controller 0 */ - 5, /* Serial Synchronous Controller 1 */ - 5, /* Serial Synchronous Controller 2 */ - 0, /* Timer Counter 0 */ - 0, /* Timer Counter 1 */ - 0, /* Timer Counter 2 */ - 3, /* USB Host port */ - 3, /* Serial Synchronous Controller 3 */ - 0, /* Two-Wire Interface 1 */ - 0, /* CAN Controller 0 */ - 0, /* CAN Controller 1 */ - 0, /* mAgicV HALT line */ - 0, /* mAgicV SIRQ0 line */ - 0, /* mAgicV exception line */ - 0, /* mAgicV end of DMA line */ - 0, /* Advanced Interrupt Controller */ - 0, /* Advanced Interrupt Controller */ - 0, /* Advanced Interrupt Controller */ -}; - -void __init at572d940hf_init_interrupts(unsigned int priority[NR_AIC_IRQS]) -{ - if (!priority) - priority = at572d940hf_default_irq_priority; - - /* Initialize the AIC interrupt controller */ - at91_aic_init(priority); - - /* Enable GPIO interrupts */ - at91_gpio_irq_setup(); -} - diff --git a/arch/arm/mach-at91/at572d940hf_devices.c b/arch/arm/mach-at91/at572d940hf_devices.c deleted file mode 100644 index 0fc20a24078..00000000000 --- a/arch/arm/mach-at91/at572d940hf_devices.c +++ /dev/null @@ -1,970 +0,0 @@ -/* - * arch/arm/mach-at91/at572d940hf_devices.c - * - * Copyright (C) 2008 Atmel Antonio R. Costa <costa.antonior@gmail.com> - * Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org> - * Copyright (C) 2005 David Brownell - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include <linux/dma-mapping.h> -#include <linux/platform_device.h> - -#include <mach/board.h> -#include <mach/gpio.h> -#include <mach/at572d940hf.h> -#include <mach/at572d940hf_matrix.h> -#include <mach/at91sam9_smc.h> - -#include "generic.h" -#include "sam9_smc.h" - - -/* -------------------------------------------------------------------- - * USB Host - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) -static u64 ohci_dmamask = DMA_BIT_MASK(32); -static struct at91_usbh_data usbh_data; - -static struct resource usbh_resources[] = { - [0] = { - .start = AT572D940HF_UHP_BASE, - .end = AT572D940HF_UHP_BASE + SZ_1M - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_UHP, - .end = AT572D940HF_ID_UHP, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at572d940hf_usbh_device = { - .name = "at91_ohci", - .id = -1, - .dev = { - .dma_mask = &ohci_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &usbh_data, - }, - .resource = usbh_resources, - .num_resources = ARRAY_SIZE(usbh_resources), -}; - -void __init at91_add_device_usbh(struct at91_usbh_data *data) -{ - if (!data) - return; - - usbh_data = *data; - platform_device_register(&at572d940hf_usbh_device); - -} -#else -void __init at91_add_device_usbh(struct at91_usbh_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * USB Device (Gadget) - * -------------------------------------------------------------------- */ - -#ifdef CONFIG_USB_GADGET_AT91 -static struct at91_udc_data udc_data; - -static struct resource udc_resources[] = { - [0] = { - .start = AT572D940HF_BASE_UDP, - .end = AT572D940HF_BASE_UDP + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_UDP, - .end = AT572D940HF_ID_UDP, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at572d940hf_udc_device = { - .name = "at91_udc", - .id = -1, - .dev = { - .platform_data = &udc_data, - }, - .resource = udc_resources, - .num_resources = ARRAY_SIZE(udc_resources), -}; - -void __init at91_add_device_udc(struct at91_udc_data *data) -{ - if (!data) - return; - - if (data->vbus_pin) { - at91_set_gpio_input(data->vbus_pin, 0); - at91_set_deglitch(data->vbus_pin, 1); - } - - /* Pullup pin is handled internally */ - - udc_data = *data; - platform_device_register(&at572d940hf_udc_device); -} -#else -void __init at91_add_device_udc(struct at91_udc_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * Ethernet - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE) -static u64 eth_dmamask = DMA_BIT_MASK(32); -static struct at91_eth_data eth_data; - -static struct resource eth_resources[] = { - [0] = { - .start = AT572D940HF_BASE_EMAC, - .end = AT572D940HF_BASE_EMAC + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_EMAC, - .end = AT572D940HF_ID_EMAC, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at572d940hf_eth_device = { - .name = "macb", - .id = -1, - .dev = { - .dma_mask = ð_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = ð_data, - }, - .resource = eth_resources, - .num_resources = ARRAY_SIZE(eth_resources), -}; - -void __init at91_add_device_eth(struct at91_eth_data *data) -{ - if (!data) - return; - - if (data->phy_irq_pin) { - at91_set_gpio_input(data->phy_irq_pin, 0); - at91_set_deglitch(data->phy_irq_pin, 1); - } - - /* Only RMII is supported */ - data->is_rmii = 1; - - /* Pins used for RMII */ - at91_set_A_periph(AT91_PIN_PA16, 0); /* ETXCK_EREFCK */ - at91_set_A_periph(AT91_PIN_PA17, 0); /* ERXDV */ - at91_set_A_periph(AT91_PIN_PA18, 0); /* ERX0 */ - at91_set_A_periph(AT91_PIN_PA19, 0); /* ERX1 */ - at91_set_A_periph(AT91_PIN_PA20, 0); /* ERXER */ - at91_set_A_periph(AT91_PIN_PA23, 0); /* ETXEN */ - at91_set_A_periph(AT91_PIN_PA21, 0); /* ETX0 */ - at91_set_A_periph(AT91_PIN_PA22, 0); /* ETX1 */ - at91_set_A_periph(AT91_PIN_PA13, 0); /* EMDIO */ - at91_set_A_periph(AT91_PIN_PA14, 0); /* EMDC */ - - eth_data = *data; - platform_device_register(&at572d940hf_eth_device); -} -#else -void __init at91_add_device_eth(struct at91_eth_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * MMC / SD - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE) -static u64 mmc_dmamask = DMA_BIT_MASK(32); -static struct at91_mmc_data mmc_data; - -static struct resource mmc_resources[] = { - [0] = { - .start = AT572D940HF_BASE_MCI, - .end = AT572D940HF_BASE_MCI + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_MCI, - .end = AT572D940HF_ID_MCI, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at572d940hf_mmc_device = { - .name = "at91_mci", - .id = -1, - .dev = { - .dma_mask = &mmc_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &mmc_data, - }, - .resource = mmc_resources, - .num_resources = ARRAY_SIZE(mmc_resources), -}; - -void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) -{ - if (!data) - return; - - /* input/irq */ - if (data->det_pin) { - at91_set_gpio_input(data->det_pin, 1); - at91_set_deglitch(data->det_pin, 1); - } - if (data->wp_pin) - at91_set_gpio_input(data->wp_pin, 1); - if (data->vcc_pin) - at91_set_gpio_output(data->vcc_pin, 0); - - /* CLK */ - at91_set_A_periph(AT91_PIN_PC22, 0); - - /* CMD */ - at91_set_A_periph(AT91_PIN_PC23, 1); - - /* DAT0, maybe DAT1..DAT3 */ - at91_set_A_periph(AT91_PIN_PC24, 1); - if (data->wire4) { - at91_set_A_periph(AT91_PIN_PC25, 1); - at91_set_A_periph(AT91_PIN_PC26, 1); - at91_set_A_periph(AT91_PIN_PC27, 1); - } - - mmc_data = *data; - platform_device_register(&at572d940hf_mmc_device); -} -#else -void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * NAND / SmartMedia - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE) -static struct atmel_nand_data nand_data; - -#define NAND_BASE AT91_CHIPSELECT_3 - -static struct resource nand_resources[] = { - { - .start = NAND_BASE, - .end = NAND_BASE + SZ_256M - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device at572d940hf_nand_device = { - .name = "atmel_nand", - .id = -1, - .dev = { - .platform_data = &nand_data, - }, - .resource = nand_resources, - .num_resources = ARRAY_SIZE(nand_resources), -}; - -void __init at91_add_device_nand(struct atmel_nand_data *data) -{ - unsigned long csa; - - if (!data) - return; - - csa = at91_sys_read(AT91_MATRIX_EBICSA); - at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA); - - /* enable pin */ - if (data->enable_pin) - at91_set_gpio_output(data->enable_pin, 1); - - /* ready/busy pin */ - if (data->rdy_pin) - at91_set_gpio_input(data->rdy_pin, 1); - - /* card detect pin */ - if (data->det_pin) - at91_set_gpio_input(data->det_pin, 1); - - at91_set_A_periph(AT91_PIN_PB28, 0); /* A[22] */ - at91_set_B_periph(AT91_PIN_PA28, 0); /* NANDOE */ - at91_set_B_periph(AT91_PIN_PA29, 0); /* NANDWE */ - - nand_data = *data; - platform_device_register(&at572d940hf_nand_device); -} - -#else -void __init at91_add_device_nand(struct atmel_nand_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * TWI (i2c) - * -------------------------------------------------------------------- */ - -/* - * Prefer the GPIO code since the TWI controller isn't robust - * (gets overruns and underruns under load) and can only issue - * repeated STARTs in one scenario (the driver doesn't yet handle them). - */ - -#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) - -static struct i2c_gpio_platform_data pdata = { - .sda_pin = AT91_PIN_PC7, - .sda_is_open_drain = 1, - .scl_pin = AT91_PIN_PC8, - .scl_is_open_drain = 1, - .udelay = 2, /* ~100 kHz */ -}; - -static struct platform_device at572d940hf_twi_device { - .name = "i2c-gpio", - .id = -1, - .dev.platform_data = &pdata, -}; - -void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) -{ - at91_set_GPIO_periph(AT91_PIN_PC7, 1); /* TWD (SDA) */ - at91_set_multi_drive(AT91_PIN_PC7, 1); - - at91_set_GPIO_periph(AT91_PIN_PA8, 1); /* TWCK (SCL) */ - at91_set_multi_drive(AT91_PIN_PC8, 1); - - i2c_register_board_info(0, devices, nr_devices); - platform_device_register(&at572d940hf_twi_device); -} - -#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE) - -static struct resource twi0_resources[] = { - [0] = { - .start = AT572D940HF_BASE_TWI0, - .end = AT572D940HF_BASE_TWI0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_TWI0, - .end = AT572D940HF_ID_TWI0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at572d940hf_twi0_device = { - .name = "at91_i2c", - .id = 0, - .resource = twi0_resources, - .num_resources = ARRAY_SIZE(twi0_resources), -}; - -static struct resource twi1_resources[] = { - [0] = { - .start = AT572D940HF_BASE_TWI1, - .end = AT572D940HF_BASE_TWI1 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_TWI1, - .end = AT572D940HF_ID_TWI1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at572d940hf_twi1_device = { - .name = "at91_i2c", - .id = 1, - .resource = twi1_resources, - .num_resources = ARRAY_SIZE(twi1_resources), -}; - -void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) -{ - /* pins used for TWI0 interface */ - at91_set_A_periph(AT91_PIN_PC7, 0); /* TWD */ - at91_set_multi_drive(AT91_PIN_PC7, 1); - - at91_set_A_periph(AT91_PIN_PC8, 0); /* TWCK */ - at91_set_multi_drive(AT91_PIN_PC8, 1); - - /* pins used for TWI1 interface */ - at91_set_A_periph(AT91_PIN_PC20, 0); /* TWD */ - at91_set_multi_drive(AT91_PIN_PC20, 1); - - at91_set_A_periph(AT91_PIN_PC21, 0); /* TWCK */ - at91_set_multi_drive(AT91_PIN_PC21, 1); - - i2c_register_board_info(0, devices, nr_devices); - platform_device_register(&at572d940hf_twi0_device); - platform_device_register(&at572d940hf_twi1_device); -} -#else -void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {} -#endif - - -/* -------------------------------------------------------------------- - * SPI - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) -static u64 spi_dmamask = DMA_BIT_MASK(32); - -static struct resource spi0_resources[] = { - [0] = { - .start = AT572D940HF_BASE_SPI0, - .end = AT572D940HF_BASE_SPI0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_SPI0, - .end = AT572D940HF_ID_SPI0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at572d940hf_spi0_device = { - .name = "atmel_spi", - .id = 0, - .dev = { - .dma_mask = &spi_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = spi0_resources, - .num_resources = ARRAY_SIZE(spi0_resources), -}; - -static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PA5, AT91_PIN_PA6 }; - -static struct resource spi1_resources[] = { - [0] = { - .start = AT572D940HF_BASE_SPI1, - .end = AT572D940HF_BASE_SPI1 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_SPI1, - .end = AT572D940HF_ID_SPI1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at572d940hf_spi1_device = { - .name = "atmel_spi", - .id = 1, - .dev = { - .dma_mask = &spi_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = spi1_resources, - .num_resources = ARRAY_SIZE(spi1_resources), -}; - -static const unsigned spi1_standard_cs[4] = { AT91_PIN_PC3, AT91_PIN_PC4, AT91_PIN_PC5, AT91_PIN_PC6 }; - -void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) -{ - int i; - unsigned long cs_pin; - short enable_spi0 = 0; - short enable_spi1 = 0; - - /* Choose SPI chip-selects */ - for (i = 0; i < nr_devices; i++) { - if (devices[i].controller_data) - cs_pin = (unsigned long) devices[i].controller_data; - else if (devices[i].bus_num == 0) - cs_pin = spi0_standard_cs[devices[i].chip_select]; - else - cs_pin = spi1_standard_cs[devices[i].chip_select]; - - if (devices[i].bus_num == 0) - enable_spi0 = 1; - else - enable_spi1 = 1; - - /* enable chip-select pin */ - at91_set_gpio_output(cs_pin, 1); - - /* pass chip-select pin to driver */ - devices[i].controller_data = (void *) cs_pin; - } - - spi_register_board_info(devices, nr_devices); - - /* Configure SPI bus(es) */ - if (enable_spi0) { - at91_set_A_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */ - at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ - at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */ - - at91_clock_associate("spi0_clk", &at572d940hf_spi0_device.dev, "spi_clk"); - platform_device_register(&at572d940hf_spi0_device); - } - if (enable_spi1) { - at91_set_A_periph(AT91_PIN_PC0, 0); /* SPI1_MISO */ - at91_set_A_periph(AT91_PIN_PC1, 0); /* SPI1_MOSI */ - at91_set_A_periph(AT91_PIN_PC2, 0); /* SPI1_SPCK */ - - at91_clock_associate("spi1_clk", &at572d940hf_spi1_device.dev, "spi_clk"); - platform_device_register(&at572d940hf_spi1_device); - } -} -#else -void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {} -#endif - - -/* -------------------------------------------------------------------- - * Timer/Counter blocks - * -------------------------------------------------------------------- */ - -#ifdef CONFIG_ATMEL_TCLIB - -static struct resource tcb_resources[] = { - [0] = { - .start = AT572D940HF_BASE_TCB, - .end = AT572D940HF_BASE_TCB + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_TC0, - .end = AT572D940HF_ID_TC0, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = AT572D940HF_ID_TC1, - .end = AT572D940HF_ID_TC1, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = AT572D940HF_ID_TC2, - .end = AT572D940HF_ID_TC2, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at572d940hf_tcb_device = { - .name = "atmel_tcb", - .id = 0, - .resource = tcb_resources, - .num_resources = ARRAY_SIZE(tcb_resources), -}; - -static void __init at91_add_device_tc(void) -{ - /* this chip has a separate clock and irq for each TC channel */ - at91_clock_associate("tc0_clk", &at572d940hf_tcb_device.dev, "t0_clk"); - at91_clock_associate("tc1_clk", &at572d940hf_tcb_device.dev, "t1_clk"); - at91_clock_associate("tc2_clk", &at572d940hf_tcb_device.dev, "t2_clk"); - platform_device_register(&at572d940hf_tcb_device); -} -#else -static void __init at91_add_device_tc(void) { } -#endif - - -/* -------------------------------------------------------------------- - * RTT - * -------------------------------------------------------------------- */ - -static struct resource rtt_resources[] = { - { - .start = AT91_BASE_SYS + AT91_RTT, - .end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device at572d940hf_rtt_device = { - .name = "at91_rtt", - .id = 0, - .resource = rtt_resources, - .num_resources = ARRAY_SIZE(rtt_resources), -}; - -static void __init at91_add_device_rtt(void) -{ - platform_device_register(&at572d940hf_rtt_device); -} - - -/* -------------------------------------------------------------------- - * Watchdog - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE) -static struct platform_device at572d940hf_wdt_device = { - .name = "at91_wdt", - .id = -1, - .num_resources = 0, -}; - -static void __init at91_add_device_watchdog(void) -{ - platform_device_register(&at572d940hf_wdt_device); -} -#else -static void __init at91_add_device_watchdog(void) {} -#endif - - -/* -------------------------------------------------------------------- - * UART - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_SERIAL_ATMEL) -static struct resource dbgu_resources[] = { - [0] = { - .start = AT91_VA_BASE_SYS + AT91_DBGU, - .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91_ID_SYS, - .end = AT91_ID_SYS, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data dbgu_data = { - .use_dma_tx = 0, - .use_dma_rx = 0, /* DBGU not capable of receive DMA */ - .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU), -}; - -static u64 dbgu_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at572d940hf_dbgu_device = { - .name = "atmel_usart", - .id = 0, - .dev = { - .dma_mask = &dbgu_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &dbgu_data, - }, - .resource = dbgu_resources, - .num_resources = ARRAY_SIZE(dbgu_resources), -}; - -static inline void configure_dbgu_pins(void) -{ - at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */ - at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */ -} - -static struct resource uart0_resources[] = { - [0] = { - .start = AT572D940HF_BASE_US0, - .end = AT572D940HF_BASE_US0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_US0, - .end = AT572D940HF_ID_US0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data uart0_data = { - .use_dma_tx = 1, - .use_dma_rx = 1, -}; - -static u64 uart0_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at572d940hf_uart0_device = { - .name = "atmel_usart", - .id = 1, - .dev = { - .dma_mask = &uart0_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &uart0_data, - }, - .resource = uart0_resources, - .num_resources = ARRAY_SIZE(uart0_resources), -}; - -static inline void configure_usart0_pins(unsigned pins) -{ - at91_set_A_periph(AT91_PIN_PA8, 1); /* TXD0 */ - at91_set_A_periph(AT91_PIN_PA7, 0); /* RXD0 */ - - if (pins & ATMEL_UART_RTS) - at91_set_A_periph(AT91_PIN_PA10, 0); /* RTS0 */ - if (pins & ATMEL_UART_CTS) - at91_set_A_periph(AT91_PIN_PA9, 0); /* CTS0 */ -} - -static struct resource uart1_resources[] = { - [0] = { - .start = AT572D940HF_BASE_US1, - .end = AT572D940HF_BASE_US1 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_US1, - .end = AT572D940HF_ID_US1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data uart1_data = { - .use_dma_tx = 1, - .use_dma_rx = 1, -}; - -static u64 uart1_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at572d940hf_uart1_device = { - .name = "atmel_usart", - .id = 2, - .dev = { - .dma_mask = &uart1_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &uart1_data, - }, - .resource = uart1_resources, - .num_resources = ARRAY_SIZE(uart1_resources), -}; - -static inline void configure_usart1_pins(unsigned pins) -{ - at91_set_A_periph(AT91_PIN_PC10, 1); /* TXD1 */ - at91_set_A_periph(AT91_PIN_PC9 , 0); /* RXD1 */ - - if (pins & ATMEL_UART_RTS) - at91_set_A_periph(AT91_PIN_PC12, 0); /* RTS1 */ - if (pins & ATMEL_UART_CTS) - at91_set_A_periph(AT91_PIN_PC11, 0); /* CTS1 */ -} - -static struct resource uart2_resources[] = { - [0] = { - .start = AT572D940HF_BASE_US2, - .end = AT572D940HF_BASE_US2 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_US2, - .end = AT572D940HF_ID_US2, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data uart2_data = { - .use_dma_tx = 1, - .use_dma_rx = 1, -}; - -static u64 uart2_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at572d940hf_uart2_device = { - .name = "atmel_usart", - .id = 3, - .dev = { - .dma_mask = &uart2_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &uart2_data, - }, - .resource = uart2_resources, - .num_resources = ARRAY_SIZE(uart2_resources), -}; - -static inline void configure_usart2_pins(unsigned pins) -{ - at91_set_A_periph(AT91_PIN_PC15, 1); /* TXD2 */ - at91_set_A_periph(AT91_PIN_PC14, 0); /* RXD2 */ - - if (pins & ATMEL_UART_RTS) - at91_set_A_periph(AT91_PIN_PC17, 0); /* RTS2 */ - if (pins & ATMEL_UART_CTS) - at91_set_A_periph(AT91_PIN_PC16, 0); /* CTS2 */ -} - -static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ -struct platform_device *atmel_default_console_device; /* the serial console device */ - -void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) -{ - struct platform_device *pdev; - - switch (id) { - case 0: /* DBGU */ - pdev = &at572d940hf_dbgu_device; - configure_dbgu_pins(); - at91_clock_associate("mck", &pdev->dev, "usart"); - break; - case AT572D940HF_ID_US0: - pdev = &at572d940hf_uart0_device; - configure_usart0_pins(pins); - at91_clock_associate("usart0_clk", &pdev->dev, "usart"); - break; - case AT572D940HF_ID_US1: - pdev = &at572d940hf_uart1_device; - configure_usart1_pins(pins); - at91_clock_associate("usart1_clk", &pdev->dev, "usart"); - break; - case AT572D940HF_ID_US2: - pdev = &at572d940hf_uart2_device; - configure_usart2_pins(pins); - at91_clock_associate("usart2_clk", &pdev->dev, "usart"); - break; - default: - return; - } - pdev->id = portnr; /* update to mapped ID */ - - if (portnr < ATMEL_MAX_UART) - at91_uarts[portnr] = pdev; -} - -void __init at91_set_serial_console(unsigned portnr) -{ - if (portnr < ATMEL_MAX_UART) - atmel_default_console_device = at91_uarts[portnr]; -} - -void __init at91_add_device_serial(void) -{ - int i; - - for (i = 0; i < ATMEL_MAX_UART; i++) { - if (at91_uarts[i]) - platform_device_register(at91_uarts[i]); - } - - if (!atmel_default_console_device) - printk(KERN_INFO "AT91: No default serial console defined.\n"); -} - -#else -void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} -void __init at91_set_serial_console(unsigned portnr) {} -void __init at91_add_device_serial(void) {} -#endif - - -/* -------------------------------------------------------------------- - * mAgic - * -------------------------------------------------------------------- */ - -#ifdef CONFIG_MAGICV -static struct resource mAgic_resources[] = { - { - .start = AT91_MAGIC_PM_BASE, - .end = AT91_MAGIC_PM_BASE + AT91_MAGIC_PM_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = AT91_MAGIC_DM_I_BASE, - .end = AT91_MAGIC_DM_I_BASE + AT91_MAGIC_DM_I_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = AT91_MAGIC_DM_F_BASE, - .end = AT91_MAGIC_DM_F_BASE + AT91_MAGIC_DM_F_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = AT91_MAGIC_DM_DB_BASE, - .end = AT91_MAGIC_DM_DB_BASE + AT91_MAGIC_DM_DB_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = AT91_MAGIC_REGS_BASE, - .end = AT91_MAGIC_REGS_BASE + AT91_MAGIC_REGS_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = AT91_MAGIC_EXTPAGE_BASE, - .end = AT91_MAGIC_EXTPAGE_BASE + AT91_MAGIC_EXTPAGE_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = AT572D940HF_ID_MSIRQ0, - .end = AT572D940HF_ID_MSIRQ0, - .flags = IORESOURCE_IRQ, - }, - { - .start = AT572D940HF_ID_MHALT, - .end = AT572D940HF_ID_MHALT, - .flags = IORESOURCE_IRQ, - }, - { - .start = AT572D940HF_ID_MEXC, - .end = AT572D940HF_ID_MEXC, - .flags = IORESOURCE_IRQ, - }, - { - .start = AT572D940HF_ID_MEDMA, - .end = AT572D940HF_ID_MEDMA, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device mAgic_device = { - .name = "mAgic", - .id = -1, - .num_resources = ARRAY_SIZE(mAgic_resources), - .resource = mAgic_resources, -}; - -void __init at91_add_device_mAgic(void) -{ - platform_device_register(&mAgic_device); -} -#else -void __init at91_add_device_mAgic(void) {} -#endif - - -/* -------------------------------------------------------------------- */ - -/* - * These devices are always present and don't need any board-specific - * setup. - */ -static int __init at91_add_standard_devices(void) -{ - at91_add_device_rtt(); - at91_add_device_watchdog(); - at91_add_device_tc(); - return 0; -} - -arch_initcall(at91_add_standard_devices); diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c index 73376170fb9..17fae4a42ab 100644 --- a/arch/arm/mach-at91/at91cap9.c +++ b/arch/arm/mach-at91/at91cap9.c @@ -222,6 +222,25 @@ static struct clk *periph_clocks[] __initdata = { // irq0 .. irq1 }; +static struct clk_lookup periph_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc.0", &utmi_clk), + CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc.0", &udphs_clk), + CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk), + CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk), + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), + CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk), + CLKDEV_CON_DEV_ID("ssc", "ssc.0", &ssc0_clk), + CLKDEV_CON_DEV_ID("ssc", "ssc.1", &ssc1_clk), +}; + +static struct clk_lookup usart_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk), +}; + /* * The four programmable clocks. * You must configure pin multiplexing to bring these signals out. @@ -258,12 +277,29 @@ static void __init at91cap9_register_clocks(void) for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) clk_register(periph_clocks[i]); + clkdev_add_table(periph_clocks_lookups, + ARRAY_SIZE(periph_clocks_lookups)); + clkdev_add_table(usart_clocks_lookups, + ARRAY_SIZE(usart_clocks_lookups)); + clk_register(&pck0); clk_register(&pck1); clk_register(&pck2); clk_register(&pck3); } +static struct clk_lookup console_clock_lookup; + +void __init at91cap9_set_console_clock(int id) +{ + if (id >= ARRAY_SIZE(usart_clocks_lookups)) + return; + + console_clock_lookup.con_id = "usart"; + console_clock_lookup.clk = usart_clocks_lookups[id].clk; + clkdev_add(&console_clock_lookup); +} + /* -------------------------------------------------------------------- * GPIO * -------------------------------------------------------------------- */ @@ -303,11 +339,14 @@ static void at91cap9_poweroff(void) * AT91CAP9 processor initialization * -------------------------------------------------------------------- */ -void __init at91cap9_initialize(unsigned long main_clock) +void __init at91cap9_map_io(void) { /* Map peripherals */ iotable_init(at91cap9_io_desc, ARRAY_SIZE(at91cap9_io_desc)); +} +void __init at91cap9_initialize(unsigned long main_clock) +{ at91_arch_reset = at91cap9_reset; pm_power_off = at91cap9_poweroff; at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1); diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c index 21020ceb2f3..cd850ed6f33 100644 --- a/arch/arm/mach-at91/at91cap9_devices.c +++ b/arch/arm/mach-at91/at91cap9_devices.c @@ -181,10 +181,6 @@ void __init at91_add_device_usba(struct usba_platform_data *data) /* Pullup pin is handled internally by USB device peripheral */ - /* Clocks */ - at91_clock_associate("utmi_clk", &at91_usba_udc_device.dev, "hclk"); - at91_clock_associate("udphs_clk", &at91_usba_udc_device.dev, "pclk"); - platform_device_register(&at91_usba_udc_device); } #else @@ -355,7 +351,6 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) } mmc0_data = *data; - at91_clock_associate("mci0_clk", &at91cap9_mmc0_device.dev, "mci_clk"); platform_device_register(&at91cap9_mmc0_device); } else { /* MCI1 */ /* CLK */ @@ -373,7 +368,6 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) } mmc1_data = *data; - at91_clock_associate("mci1_clk", &at91cap9_mmc1_device.dev, "mci_clk"); platform_device_register(&at91cap9_mmc1_device); } } @@ -614,7 +608,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */ - at91_clock_associate("spi0_clk", &at91cap9_spi0_device.dev, "spi_clk"); platform_device_register(&at91cap9_spi0_device); } if (enable_spi1) { @@ -622,7 +615,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) at91_set_A_periph(AT91_PIN_PB13, 0); /* SPI1_MOSI */ at91_set_A_periph(AT91_PIN_PB14, 0); /* SPI1_SPCK */ - at91_clock_associate("spi1_clk", &at91cap9_spi1_device.dev, "spi_clk"); platform_device_register(&at91cap9_spi1_device); } } @@ -659,8 +651,6 @@ static struct platform_device at91cap9_tcb_device = { static void __init at91_add_device_tc(void) { - /* this chip has one clock and irq for all three TC channels */ - at91_clock_associate("tcb_clk", &at91cap9_tcb_device.dev, "t0_clk"); platform_device_register(&at91cap9_tcb_device); } #else @@ -1001,12 +991,10 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) case AT91CAP9_ID_SSC0: pdev = &at91cap9_ssc0_device; configure_ssc0_pins(pins); - at91_clock_associate("ssc0_clk", &pdev->dev, "ssc"); break; case AT91CAP9_ID_SSC1: pdev = &at91cap9_ssc1_device; configure_ssc1_pins(pins); - at91_clock_associate("ssc1_clk", &pdev->dev, "ssc"); break; default: return; @@ -1199,32 +1187,30 @@ struct platform_device *atmel_default_console_device; /* the serial console devi void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { struct platform_device *pdev; + struct atmel_uart_data *pdata; switch (id) { case 0: /* DBGU */ pdev = &at91cap9_dbgu_device; configure_dbgu_pins(); - at91_clock_associate("mck", &pdev->dev, "usart"); break; case AT91CAP9_ID_US0: pdev = &at91cap9_uart0_device; configure_usart0_pins(pins); - at91_clock_associate("usart0_clk", &pdev->dev, "usart"); break; case AT91CAP9_ID_US1: pdev = &at91cap9_uart1_device; configure_usart1_pins(pins); - at91_clock_associate("usart1_clk", &pdev->dev, "usart"); break; case AT91CAP9_ID_US2: pdev = &at91cap9_uart2_device; configure_usart2_pins(pins); - at91_clock_associate("usart2_clk", &pdev->dev, "usart"); break; default: return; } - pdev->id = portnr; /* update to mapped ID */ + pdata = pdev->dev.platform_data; + pdata->num = portnr; /* update to mapped ID */ if (portnr < ATMEL_MAX_UART) at91_uarts[portnr] = pdev; @@ -1232,8 +1218,10 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) void __init at91_set_serial_console(unsigned portnr) { - if (portnr < ATMEL_MAX_UART) + if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; + at91cap9_set_console_clock(portnr); + } } void __init at91_add_device_serial(void) diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index 2e9ecad97f3..b228ce9e21a 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -18,6 +18,7 @@ #include <mach/at91rm9200.h> #include <mach/at91_pmc.h> #include <mach/at91_st.h> +#include <mach/cpu.h> #include "generic.h" #include "clock.h" @@ -191,6 +192,26 @@ static struct clk *periph_clocks[] __initdata = { // irq0 .. irq6 }; +static struct clk_lookup periph_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk), + CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk), + CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk), + CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tc3_clk), + CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk), + CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk), + CLKDEV_CON_DEV_ID("ssc", "ssc.0", &ssc0_clk), + CLKDEV_CON_DEV_ID("ssc", "ssc.1", &ssc1_clk), + CLKDEV_CON_DEV_ID("ssc", "ssc.2", &ssc2_clk), +}; + +static struct clk_lookup usart_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk), +}; + /* * The four programmable clocks. * You must configure pin multiplexing to bring these signals out. @@ -227,12 +248,29 @@ static void __init at91rm9200_register_clocks(void) for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) clk_register(periph_clocks[i]); + clkdev_add_table(periph_clocks_lookups, + ARRAY_SIZE(periph_clocks_lookups)); + clkdev_add_table(usart_clocks_lookups, + ARRAY_SIZE(usart_clocks_lookups)); + clk_register(&pck0); clk_register(&pck1); clk_register(&pck2); clk_register(&pck3); } +static struct clk_lookup console_clock_lookup; + +void __init at91rm9200_set_console_clock(int id) +{ + if (id >= ARRAY_SIZE(usart_clocks_lookups)) + return; + + console_clock_lookup.con_id = "usart"; + console_clock_lookup.clk = usart_clocks_lookups[id].clk; + clkdev_add(&console_clock_lookup); +} + /* -------------------------------------------------------------------- * GPIO * -------------------------------------------------------------------- */ @@ -266,15 +304,25 @@ static void at91rm9200_reset(void) at91_sys_write(AT91_ST_CR, AT91_ST_WDRST); } +int rm9200_type; +EXPORT_SYMBOL(rm9200_type); + +void __init at91rm9200_set_type(int type) +{ + rm9200_type = type; +} /* -------------------------------------------------------------------- * AT91RM9200 processor initialization * -------------------------------------------------------------------- */ -void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks) +void __init at91rm9200_map_io(void) { /* Map peripherals */ iotable_init(at91rm9200_io_desc, ARRAY_SIZE(at91rm9200_io_desc)); +} +void __init at91rm9200_initialize(unsigned long main_clock) +{ at91_arch_reset = at91rm9200_reset; at91_extern_irq = (1 << AT91RM9200_ID_IRQ0) | (1 << AT91RM9200_ID_IRQ1) | (1 << AT91RM9200_ID_IRQ2) | (1 << AT91RM9200_ID_IRQ3) @@ -288,7 +336,8 @@ void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks at91rm9200_register_clocks(); /* Initialize GPIO subsystem */ - at91_gpio_init(at91rm9200_gpio, banks); + at91_gpio_init(at91rm9200_gpio, + cpu_is_at91rm9200_bga() ? AT91RM9200_BGA : AT91RM9200_PQFP); } diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index 7b539228e0e..a0ba475be04 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -644,15 +644,7 @@ static struct platform_device at91rm9200_tcb1_device = { static void __init at91_add_device_tc(void) { - /* this chip has a separate clock and irq for each TC channel */ - at91_clock_associate("tc0_clk", &at91rm9200_tcb0_device.dev, "t0_clk"); - at91_clock_associate("tc1_clk", &at91rm9200_tcb0_device.dev, "t1_clk"); - at91_clock_associate("tc2_clk", &at91rm9200_tcb0_device.dev, "t2_clk"); platform_device_register(&at91rm9200_tcb0_device); - - at91_clock_associate("tc3_clk", &at91rm9200_tcb1_device.dev, "t0_clk"); - at91_clock_associate("tc4_clk", &at91rm9200_tcb1_device.dev, "t1_clk"); - at91_clock_associate("tc5_clk", &at91rm9200_tcb1_device.dev, "t2_clk"); platform_device_register(&at91rm9200_tcb1_device); } #else @@ -849,17 +841,14 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) case AT91RM9200_ID_SSC0: pdev = &at91rm9200_ssc0_device; configure_ssc0_pins(pins); - at91_clock_associate("ssc0_clk", &pdev->dev, "ssc"); break; case AT91RM9200_ID_SSC1: pdev = &at91rm9200_ssc1_device; configure_ssc1_pins(pins); - at91_clock_associate("ssc1_clk", &pdev->dev, "ssc"); break; case AT91RM9200_ID_SSC2: pdev = &at91rm9200_ssc2_device; configure_ssc2_pins(pins); - at91_clock_associate("ssc2_clk", &pdev->dev, "ssc"); break; default: return; @@ -1109,37 +1098,34 @@ struct platform_device *atmel_default_console_device; /* the serial console devi void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { struct platform_device *pdev; + struct atmel_uart_data *pdata; switch (id) { case 0: /* DBGU */ pdev = &at91rm9200_dbgu_device; configure_dbgu_pins(); - at91_clock_associate("mck", &pdev->dev, "usart"); break; case AT91RM9200_ID_US0: pdev = &at91rm9200_uart0_device; configure_usart0_pins(pins); - at91_clock_associate("usart0_clk", &pdev->dev, "usart"); break; case AT91RM9200_ID_US1: pdev = &at91rm9200_uart1_device; configure_usart1_pins(pins); - at91_clock_associate("usart1_clk", &pdev->dev, "usart"); break; case AT91RM9200_ID_US2: pdev = &at91rm9200_uart2_device; configure_usart2_pins(pins); - at91_clock_associate("usart2_clk", &pdev->dev, "usart"); break; case AT91RM9200_ID_US3: pdev = &at91rm9200_uart3_device; configure_usart3_pins(pins); - at91_clock_associate("usart3_clk", &pdev->dev, "usart"); break; default: return; } - pdev->id = portnr; /* update to mapped ID */ + pdata = pdev->dev.platform_data; + pdata->num = portnr; /* update to mapped ID */ if (portnr < ATMEL_MAX_UART) at91_uarts[portnr] = pdev; @@ -1147,8 +1133,10 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) void __init at91_set_serial_console(unsigned portnr) { - if (portnr < ATMEL_MAX_UART) + if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; + at91rm9200_set_console_clock(portnr); + } } void __init at91_add_device_serial(void) diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index 195208b3002..7d606b04d31 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -231,6 +231,28 @@ static struct clk *periph_clocks[] __initdata = { // irq0 .. irq2 }; +static struct clk_lookup periph_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), + CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk), + CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk), + CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk), + CLKDEV_CON_DEV_ID("t3_clk", "atmel_tcb.1", &tc3_clk), + CLKDEV_CON_DEV_ID("t4_clk", "atmel_tcb.1", &tc4_clk), + CLKDEV_CON_DEV_ID("t5_clk", "atmel_tcb.1", &tc5_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc_clk), +}; + +static struct clk_lookup usart_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.5", &usart4_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.6", &usart5_clk), +}; + /* * The two programmable clocks. * You must configure pin multiplexing to bring these signals out. @@ -255,10 +277,27 @@ static void __init at91sam9260_register_clocks(void) for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) clk_register(periph_clocks[i]); + clkdev_add_table(periph_clocks_lookups, + ARRAY_SIZE(periph_clocks_lookups)); + clkdev_add_table(usart_clocks_lookups, + ARRAY_SIZE(usart_clocks_lookups)); + clk_register(&pck0); clk_register(&pck1); } +static struct clk_lookup console_clock_lookup; + +void __init at91sam9260_set_console_clock(int id) +{ + if (id >= ARRAY_SIZE(usart_clocks_lookups)) + return; + + console_clock_lookup.con_id = "usart"; + console_clock_lookup.clk = usart_clocks_lookups[id].clk; + clkdev_add(&console_clock_lookup); +} + /* -------------------------------------------------------------------- * GPIO * -------------------------------------------------------------------- */ @@ -289,7 +328,7 @@ static void at91sam9260_poweroff(void) * AT91SAM9260 processor initialization * -------------------------------------------------------------------- */ -static void __init at91sam9xe_initialize(void) +static void __init at91sam9xe_map_io(void) { unsigned long cidr, sram_size; @@ -310,18 +349,21 @@ static void __init at91sam9xe_initialize(void) iotable_init(at91sam9xe_sram_desc, ARRAY_SIZE(at91sam9xe_sram_desc)); } -void __init at91sam9260_initialize(unsigned long main_clock) +void __init at91sam9260_map_io(void) { /* Map peripherals */ iotable_init(at91sam9260_io_desc, ARRAY_SIZE(at91sam9260_io_desc)); if (cpu_is_at91sam9xe()) - at91sam9xe_initialize(); + at91sam9xe_map_io(); else if (cpu_is_at91sam9g20()) iotable_init(at91sam9g20_sram_desc, ARRAY_SIZE(at91sam9g20_sram_desc)); else iotable_init(at91sam9260_sram_desc, ARRAY_SIZE(at91sam9260_sram_desc)); +} +void __init at91sam9260_initialize(unsigned long main_clock) +{ at91_arch_reset = at91sam9_alt_reset; pm_power_off = at91sam9260_poweroff; at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1) diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 07eb7b07e44..1fdeb9058a7 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -609,7 +609,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI1_SPCK */ - at91_clock_associate("spi0_clk", &at91sam9260_spi0_device.dev, "spi_clk"); platform_device_register(&at91sam9260_spi0_device); } if (enable_spi1) { @@ -617,7 +616,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) at91_set_A_periph(AT91_PIN_PB1, 0); /* SPI1_MOSI */ at91_set_A_periph(AT91_PIN_PB2, 0); /* SPI1_SPCK */ - at91_clock_associate("spi1_clk", &at91sam9260_spi1_device.dev, "spi_clk"); platform_device_register(&at91sam9260_spi1_device); } } @@ -694,15 +692,7 @@ static struct platform_device at91sam9260_tcb1_device = { static void __init at91_add_device_tc(void) { - /* this chip has a separate clock and irq for each TC channel */ - at91_clock_associate("tc0_clk", &at91sam9260_tcb0_device.dev, "t0_clk"); - at91_clock_associate("tc1_clk", &at91sam9260_tcb0_device.dev, "t1_clk"); - at91_clock_associate("tc2_clk", &at91sam9260_tcb0_device.dev, "t2_clk"); platform_device_register(&at91sam9260_tcb0_device); - - at91_clock_associate("tc3_clk", &at91sam9260_tcb1_device.dev, "t0_clk"); - at91_clock_associate("tc4_clk", &at91sam9260_tcb1_device.dev, "t1_clk"); - at91_clock_associate("tc5_clk", &at91sam9260_tcb1_device.dev, "t2_clk"); platform_device_register(&at91sam9260_tcb1_device); } #else @@ -820,7 +810,6 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) case AT91SAM9260_ID_SSC: pdev = &at91sam9260_ssc_device; configure_ssc_pins(pins); - at91_clock_associate("ssc_clk", &pdev->dev, "pclk"); break; default: return; @@ -1139,47 +1128,42 @@ struct platform_device *atmel_default_console_device; /* the serial console devi void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { struct platform_device *pdev; + struct atmel_uart_data *pdata; switch (id) { case 0: /* DBGU */ pdev = &at91sam9260_dbgu_device; configure_dbgu_pins(); - at91_clock_associate("mck", &pdev->dev, "usart"); break; case AT91SAM9260_ID_US0: pdev = &at91sam9260_uart0_device; configure_usart0_pins(pins); - at91_clock_associate("usart0_clk", &pdev->dev, "usart"); break; case AT91SAM9260_ID_US1: pdev = &at91sam9260_uart1_device; configure_usart1_pins(pins); - at91_clock_associate("usart1_clk", &pdev->dev, "usart"); break; case AT91SAM9260_ID_US2: pdev = &at91sam9260_uart2_device; configure_usart2_pins(pins); - at91_clock_associate("usart2_clk", &pdev->dev, "usart"); break; case AT91SAM9260_ID_US3: pdev = &at91sam9260_uart3_device; configure_usart3_pins(pins); - at91_clock_associate("usart3_clk", &pdev->dev, "usart"); break; case AT91SAM9260_ID_US4: pdev = &at91sam9260_uart4_device; configure_usart4_pins(); - at91_clock_associate("usart4_clk", &pdev->dev, "usart"); break; case AT91SAM9260_ID_US5: pdev = &at91sam9260_uart5_device; configure_usart5_pins(); - at91_clock_associate("usart5_clk", &pdev->dev, "usart"); break; default: return; } - pdev->id = portnr; /* update to mapped ID */ + pdata = pdev->dev.platform_data; + pdata->num = portnr; /* update to mapped ID */ if (portnr < ATMEL_MAX_UART) at91_uarts[portnr] = pdev; @@ -1187,8 +1171,10 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) void __init at91_set_serial_console(unsigned portnr) { - if (portnr < ATMEL_MAX_UART) + if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; + at91sam9260_set_console_clock(portnr); + } } void __init at91_add_device_serial(void) diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index fcad8866850..c1483168c97 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -178,6 +178,24 @@ static struct clk *periph_clocks[] __initdata = { // irq0 .. irq2 }; +static struct clk_lookup periph_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), + CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk), + CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk), + CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc1_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk), +}; + +static struct clk_lookup usart_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk), +}; + /* * The four programmable clocks. * You must configure pin multiplexing to bring these signals out. @@ -228,6 +246,11 @@ static void __init at91sam9261_register_clocks(void) for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) clk_register(periph_clocks[i]); + clkdev_add_table(periph_clocks_lookups, + ARRAY_SIZE(periph_clocks_lookups)); + clkdev_add_table(usart_clocks_lookups, + ARRAY_SIZE(usart_clocks_lookups)); + clk_register(&pck0); clk_register(&pck1); clk_register(&pck2); @@ -237,6 +260,18 @@ static void __init at91sam9261_register_clocks(void) clk_register(&hck1); } +static struct clk_lookup console_clock_lookup; + +void __init at91sam9261_set_console_clock(int id) +{ + if (id >= ARRAY_SIZE(usart_clocks_lookups)) + return; + + console_clock_lookup.con_id = "usart"; + console_clock_lookup.clk = usart_clocks_lookups[id].clk; + clkdev_add(&console_clock_lookup); +} + /* -------------------------------------------------------------------- * GPIO * -------------------------------------------------------------------- */ @@ -267,7 +302,7 @@ static void at91sam9261_poweroff(void) * AT91SAM9261 processor initialization * -------------------------------------------------------------------- */ -void __init at91sam9261_initialize(unsigned long main_clock) +void __init at91sam9261_map_io(void) { /* Map peripherals */ iotable_init(at91sam9261_io_desc, ARRAY_SIZE(at91sam9261_io_desc)); @@ -276,8 +311,10 @@ void __init at91sam9261_initialize(unsigned long main_clock) iotable_init(at91sam9g10_sram_desc, ARRAY_SIZE(at91sam9g10_sram_desc)); else iotable_init(at91sam9261_sram_desc, ARRAY_SIZE(at91sam9261_sram_desc)); +} - +void __init at91sam9261_initialize(unsigned long main_clock) +{ at91_arch_reset = at91sam9_alt_reset; pm_power_off = at91sam9261_poweroff; at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1) diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 59fc48311fb..3eb4538fcee 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -426,7 +426,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */ - at91_clock_associate("spi0_clk", &at91sam9261_spi0_device.dev, "spi_clk"); platform_device_register(&at91sam9261_spi0_device); } if (enable_spi1) { @@ -434,7 +433,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) at91_set_A_periph(AT91_PIN_PB31, 0); /* SPI1_MOSI */ at91_set_A_periph(AT91_PIN_PB29, 0); /* SPI1_SPCK */ - at91_clock_associate("spi1_clk", &at91sam9261_spi1_device.dev, "spi_clk"); platform_device_register(&at91sam9261_spi1_device); } } @@ -581,10 +579,6 @@ static struct platform_device at91sam9261_tcb_device = { static void __init at91_add_device_tc(void) { - /* this chip has a separate clock and irq for each TC channel */ - at91_clock_associate("tc0_clk", &at91sam9261_tcb_device.dev, "t0_clk"); - at91_clock_associate("tc1_clk", &at91sam9261_tcb_device.dev, "t1_clk"); - at91_clock_associate("tc2_clk", &at91sam9261_tcb_device.dev, "t2_clk"); platform_device_register(&at91sam9261_tcb_device); } #else @@ -786,17 +780,14 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) case AT91SAM9261_ID_SSC0: pdev = &at91sam9261_ssc0_device; configure_ssc0_pins(pins); - at91_clock_associate("ssc0_clk", &pdev->dev, "pclk"); break; case AT91SAM9261_ID_SSC1: pdev = &at91sam9261_ssc1_device; configure_ssc1_pins(pins); - at91_clock_associate("ssc1_clk", &pdev->dev, "pclk"); break; case AT91SAM9261_ID_SSC2: pdev = &at91sam9261_ssc2_device; configure_ssc2_pins(pins); - at91_clock_associate("ssc2_clk", &pdev->dev, "pclk"); break; default: return; @@ -989,32 +980,30 @@ struct platform_device *atmel_default_console_device; /* the serial console devi void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { struct platform_device *pdev; + struct atmel_uart_data *pdata; switch (id) { case 0: /* DBGU */ pdev = &at91sam9261_dbgu_device; configure_dbgu_pins(); - at91_clock_associate("mck", &pdev->dev, "usart"); break; case AT91SAM9261_ID_US0: pdev = &at91sam9261_uart0_device; configure_usart0_pins(pins); - at91_clock_associate("usart0_clk", &pdev->dev, "usart"); break; case AT91SAM9261_ID_US1: pdev = &at91sam9261_uart1_device; configure_usart1_pins(pins); - at91_clock_associate("usart1_clk", &pdev->dev, "usart"); break; case AT91SAM9261_ID_US2: pdev = &at91sam9261_uart2_device; configure_usart2_pins(pins); - at91_clock_associate("usart2_clk", &pdev->dev, "usart"); break; default: return; } - pdev->id = portnr; /* update to mapped ID */ + pdata = pdev->dev.platform_data; + pdata->num = portnr; /* update to mapped ID */ if (portnr < ATMEL_MAX_UART) at91_uarts[portnr] = pdev; @@ -1022,8 +1011,10 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) void __init at91_set_serial_console(unsigned portnr) { - if (portnr < ATMEL_MAX_UART) + if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; + at91sam9261_set_console_clock(portnr); + } } void __init at91_add_device_serial(void) diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index 249f900954d..dc28477d14f 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -199,6 +199,23 @@ static struct clk *periph_clocks[] __initdata = { // irq0 .. irq1 }; +static struct clk_lookup periph_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), + CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk), + CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk), + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), + CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk), +}; + +static struct clk_lookup usart_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk), +}; + /* * The four programmable clocks. * You must configure pin multiplexing to bring these signals out. @@ -235,12 +252,29 @@ static void __init at91sam9263_register_clocks(void) for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) clk_register(periph_clocks[i]); + clkdev_add_table(periph_clocks_lookups, + ARRAY_SIZE(periph_clocks_lookups)); + clkdev_add_table(usart_clocks_lookups, + ARRAY_SIZE(usart_clocks_lookups)); + clk_register(&pck0); clk_register(&pck1); clk_register(&pck2); clk_register(&pck3); } +static struct clk_lookup console_clock_lookup; + +void __init at91sam9263_set_console_clock(int id) +{ + if (id >= ARRAY_SIZE(usart_clocks_lookups)) + return; + + console_clock_lookup.con_id = "usart"; + console_clock_lookup.clk = usart_clocks_lookups[id].clk; + clkdev_add(&console_clock_lookup); +} + /* -------------------------------------------------------------------- * GPIO * -------------------------------------------------------------------- */ @@ -279,11 +313,14 @@ static void at91sam9263_poweroff(void) * AT91SAM9263 processor initialization * -------------------------------------------------------------------- */ -void __init at91sam9263_initialize(unsigned long main_clock) +void __init at91sam9263_map_io(void) { /* Map peripherals */ iotable_init(at91sam9263_io_desc, ARRAY_SIZE(at91sam9263_io_desc)); +} +void __init at91sam9263_initialize(unsigned long main_clock) +{ at91_arch_reset = at91sam9_alt_reset; pm_power_off = at91sam9263_poweroff; at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1); diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index fb5c23af101..ffe081b77ed 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -308,7 +308,6 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) } mmc0_data = *data; - at91_clock_associate("mci0_clk", &at91sam9263_mmc0_device.dev, "mci_clk"); platform_device_register(&at91sam9263_mmc0_device); } else { /* MCI1 */ /* CLK */ @@ -339,7 +338,6 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) } mmc1_data = *data; - at91_clock_associate("mci1_clk", &at91sam9263_mmc1_device.dev, "mci_clk"); platform_device_register(&at91sam9263_mmc1_device); } } @@ -686,7 +684,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */ - at91_clock_associate("spi0_clk", &at91sam9263_spi0_device.dev, "spi_clk"); platform_device_register(&at91sam9263_spi0_device); } if (enable_spi1) { @@ -694,7 +691,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) at91_set_A_periph(AT91_PIN_PB13, 0); /* SPI1_MOSI */ at91_set_A_periph(AT91_PIN_PB14, 0); /* SPI1_SPCK */ - at91_clock_associate("spi1_clk", &at91sam9263_spi1_device.dev, "spi_clk"); platform_device_register(&at91sam9263_spi1_device); } } @@ -941,8 +937,6 @@ static struct platform_device at91sam9263_tcb_device = { static void __init at91_add_device_tc(void) { - /* this chip has one clock and irq for all three TC channels */ - at91_clock_associate("tcb_clk", &at91sam9263_tcb_device.dev, "t0_clk"); platform_device_register(&at91sam9263_tcb_device); } #else @@ -1171,12 +1165,10 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) case AT91SAM9263_ID_SSC0: pdev = &at91sam9263_ssc0_device; configure_ssc0_pins(pins); - at91_clock_associate("ssc0_clk", &pdev->dev, "pclk"); break; case AT91SAM9263_ID_SSC1: pdev = &at91sam9263_ssc1_device; configure_ssc1_pins(pins); - at91_clock_associate("ssc1_clk", &pdev->dev, "pclk"); break; default: return; @@ -1370,32 +1362,30 @@ struct platform_device *atmel_default_console_device; /* the serial console devi void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { struct platform_device *pdev; + struct atmel_uart_data *pdata; switch (id) { case 0: /* DBGU */ pdev = &at91sam9263_dbgu_device; configure_dbgu_pins(); - at91_clock_associate("mck", &pdev->dev, "usart"); break; case AT91SAM9263_ID_US0: pdev = &at91sam9263_uart0_device; configure_usart0_pins(pins); - at91_clock_associate("usart0_clk", &pdev->dev, "usart"); break; case AT91SAM9263_ID_US1: pdev = &at91sam9263_uart1_device; configure_usart1_pins(pins); - at91_clock_associate("usart1_clk", &pdev->dev, "usart"); break; case AT91SAM9263_ID_US2: pdev = &at91sam9263_uart2_device; configure_usart2_pins(pins); - at91_clock_associate("usart2_clk", &pdev->dev, "usart"); break; default: return; } - pdev->id = portnr; /* update to mapped ID */ + pdata = pdev->dev.platform_data; + pdata->num = portnr; /* update to mapped ID */ if (portnr < ATMEL_MAX_UART) at91_uarts[portnr] = pdev; @@ -1403,8 +1393,10 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) void __init at91_set_serial_console(unsigned portnr) { - if (portnr < ATMEL_MAX_UART) + if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; + at91sam9263_set_console_clock(portnr); + } } void __init at91_add_device_serial(void) diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index c67b47f1c0f..2bb6ff9af1c 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -184,22 +184,6 @@ static struct clk vdec_clk = { .type = CLK_TYPE_PERIPHERAL, }; -/* One additional fake clock for ohci */ -static struct clk ohci_clk = { - .name = "ohci_clk", - .pmc_mask = 0, - .type = CLK_TYPE_PERIPHERAL, - .parent = &uhphs_clk, -}; - -/* One additional fake clock for second TC block */ -static struct clk tcb1_clk = { - .name = "tcb1_clk", - .pmc_mask = 0, - .type = CLK_TYPE_PERIPHERAL, - .parent = &tcb0_clk, -}; - static struct clk *periph_clocks[] __initdata = { &pioA_clk, &pioB_clk, @@ -228,8 +212,30 @@ static struct clk *periph_clocks[] __initdata = { &udphs_clk, &mmc1_clk, // irq0 - &ohci_clk, - &tcb1_clk, +}; + +static struct clk_lookup periph_clocks_lookups[] = { + /* One additional fake clock for ohci */ + CLKDEV_CON_ID("ohci_clk", &uhphs_clk), + CLKDEV_CON_DEV_ID("ehci_clk", "atmel-ehci.0", &uhphs_clk), + CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc.0", &utmi_clk), + CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc.0", &udphs_clk), + CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk), + CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk), + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), + CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb0_clk), + CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tcb0_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), +}; + +static struct clk_lookup usart_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk), }; /* @@ -256,6 +262,11 @@ static void __init at91sam9g45_register_clocks(void) for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) clk_register(periph_clocks[i]); + clkdev_add_table(periph_clocks_lookups, + ARRAY_SIZE(periph_clocks_lookups)); + clkdev_add_table(usart_clocks_lookups, + ARRAY_SIZE(usart_clocks_lookups)); + if (cpu_is_at91sam9m10() || cpu_is_at91sam9m11()) clk_register(&vdec_clk); @@ -263,6 +274,18 @@ static void __init at91sam9g45_register_clocks(void) clk_register(&pck1); } +static struct clk_lookup console_clock_lookup; + +void __init at91sam9g45_set_console_clock(int id) +{ + if (id >= ARRAY_SIZE(usart_clocks_lookups)) + return; + + console_clock_lookup.con_id = "usart"; + console_clock_lookup.clk = usart_clocks_lookups[id].clk; + clkdev_add(&console_clock_lookup); +} + /* -------------------------------------------------------------------- * GPIO * -------------------------------------------------------------------- */ @@ -306,11 +329,14 @@ static void at91sam9g45_poweroff(void) * AT91SAM9G45 processor initialization * -------------------------------------------------------------------- */ -void __init at91sam9g45_initialize(unsigned long main_clock) +void __init at91sam9g45_map_io(void) { /* Map peripherals */ iotable_init(at91sam9g45_io_desc, ARRAY_SIZE(at91sam9g45_io_desc)); +} +void __init at91sam9g45_initialize(unsigned long main_clock) +{ at91_arch_reset = at91sam9g45_reset; pm_power_off = at91sam9g45_poweroff; at91_extern_irq = (1 << AT91SAM9G45_ID_IRQ0); diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index 5e9f8a4c38d..05674865bc2 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -180,7 +180,6 @@ void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data) } usbh_ehci_data = *data; - at91_clock_associate("uhphs_clk", &at91_usbh_ehci_device.dev, "ehci_clk"); platform_device_register(&at91_usbh_ehci_device); } #else @@ -266,10 +265,6 @@ void __init at91_add_device_usba(struct usba_platform_data *data) /* Pullup pin is handled internally by USB device peripheral */ - /* Clocks */ - at91_clock_associate("utmi_clk", &at91_usba_udc_device.dev, "hclk"); - at91_clock_associate("udphs_clk", &at91_usba_udc_device.dev, "pclk"); - platform_device_register(&at91_usba_udc_device); } #else @@ -478,7 +473,6 @@ void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) } mmc0_data = *data; - at91_clock_associate("mci0_clk", &at91sam9g45_mmc0_device.dev, "mci_clk"); platform_device_register(&at91sam9g45_mmc0_device); } else { /* MCI1 */ @@ -504,7 +498,6 @@ void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) } mmc1_data = *data; - at91_clock_associate("mci1_clk", &at91sam9g45_mmc1_device.dev, "mci_clk"); platform_device_register(&at91sam9g45_mmc1_device); } @@ -801,7 +794,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) at91_set_A_periph(AT91_PIN_PB1, 0); /* SPI0_MOSI */ at91_set_A_periph(AT91_PIN_PB2, 0); /* SPI0_SPCK */ - at91_clock_associate("spi0_clk", &at91sam9g45_spi0_device.dev, "spi_clk"); platform_device_register(&at91sam9g45_spi0_device); } if (enable_spi1) { @@ -809,7 +801,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) at91_set_A_periph(AT91_PIN_PB15, 0); /* SPI1_MOSI */ at91_set_A_periph(AT91_PIN_PB16, 0); /* SPI1_SPCK */ - at91_clock_associate("spi1_clk", &at91sam9g45_spi1_device.dev, "spi_clk"); platform_device_register(&at91sam9g45_spi1_device); } } @@ -999,10 +990,7 @@ static struct platform_device at91sam9g45_tcb1_device = { static void __init at91_add_device_tc(void) { - /* this chip has one clock and irq for all six TC channels */ - at91_clock_associate("tcb0_clk", &at91sam9g45_tcb0_device.dev, "t0_clk"); platform_device_register(&at91sam9g45_tcb0_device); - at91_clock_associate("tcb1_clk", &at91sam9g45_tcb1_device.dev, "t0_clk"); platform_device_register(&at91sam9g45_tcb1_device); } #else @@ -1286,12 +1274,10 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) case AT91SAM9G45_ID_SSC0: pdev = &at91sam9g45_ssc0_device; configure_ssc0_pins(pins); - at91_clock_associate("ssc0_clk", &pdev->dev, "pclk"); break; case AT91SAM9G45_ID_SSC1: pdev = &at91sam9g45_ssc1_device; configure_ssc1_pins(pins); - at91_clock_associate("ssc1_clk", &pdev->dev, "pclk"); break; default: return; @@ -1527,37 +1513,34 @@ struct platform_device *atmel_default_console_device; /* the serial console devi void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { struct platform_device *pdev; + struct atmel_uart_data *pdata; switch (id) { case 0: /* DBGU */ pdev = &at91sam9g45_dbgu_device; configure_dbgu_pins(); - at91_clock_associate("mck", &pdev->dev, "usart"); break; case AT91SAM9G45_ID_US0: pdev = &at91sam9g45_uart0_device; configure_usart0_pins(pins); - at91_clock_associate("usart0_clk", &pdev->dev, "usart"); break; case AT91SAM9G45_ID_US1: pdev = &at91sam9g45_uart1_device; configure_usart1_pins(pins); - at91_clock_associate("usart1_clk", &pdev->dev, "usart"); break; case AT91SAM9G45_ID_US2: pdev = &at91sam9g45_uart2_device; configure_usart2_pins(pins); - at91_clock_associate("usart2_clk", &pdev->dev, "usart"); break; case AT91SAM9G45_ID_US3: pdev = &at91sam9g45_uart3_device; configure_usart3_pins(pins); - at91_clock_associate("usart3_clk", &pdev->dev, "usart"); break; default: return; } - pdev->id = portnr; /* update to mapped ID */ + pdata = pdev->dev.platform_data; + pdata->num = portnr; /* update to mapped ID */ if (portnr < ATMEL_MAX_UART) at91_uarts[portnr] = pdev; @@ -1565,8 +1548,10 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) void __init at91_set_serial_console(unsigned portnr) { - if (portnr < ATMEL_MAX_UART) + if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; + at91sam9g45_set_console_clock(portnr); + } } void __init at91_add_device_serial(void) diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c index 6a9d24e5ed8..1a40f16b66c 100644 --- a/arch/arm/mach-at91/at91sam9rl.c +++ b/arch/arm/mach-at91/at91sam9rl.c @@ -190,6 +190,24 @@ static struct clk *periph_clocks[] __initdata = { // irq0 }; +static struct clk_lookup periph_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc.0", &utmi_clk), + CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc.0", &udphs_clk), + CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk), + CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk), + CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), +}; + +static struct clk_lookup usart_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk), +}; + /* * The two programmable clocks. * You must configure pin multiplexing to bring these signals out. @@ -214,10 +232,27 @@ static void __init at91sam9rl_register_clocks(void) for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) clk_register(periph_clocks[i]); + clkdev_add_table(periph_clocks_lookups, + ARRAY_SIZE(periph_clocks_lookups)); + clkdev_add_table(usart_clocks_lookups, + ARRAY_SIZE(usart_clocks_lookups)); + clk_register(&pck0); clk_register(&pck1); } +static struct clk_lookup console_clock_lookup; + +void __init at91sam9rl_set_console_clock(int id) +{ + if (id >= ARRAY_SIZE(usart_clocks_lookups)) + return; + + console_clock_lookup.con_id = "usart"; + console_clock_lookup.clk = usart_clocks_lookups[id].clk; + clkdev_add(&console_clock_lookup); +} + /* -------------------------------------------------------------------- * GPIO * -------------------------------------------------------------------- */ @@ -252,7 +287,7 @@ static void at91sam9rl_poweroff(void) * AT91SAM9RL processor initialization * -------------------------------------------------------------------- */ -void __init at91sam9rl_initialize(unsigned long main_clock) +void __init at91sam9rl_map_io(void) { unsigned long cidr, sram_size; @@ -275,7 +310,10 @@ void __init at91sam9rl_initialize(unsigned long main_clock) /* Map SRAM */ iotable_init(at91sam9rl_sram_desc, ARRAY_SIZE(at91sam9rl_sram_desc)); +} +void __init at91sam9rl_initialize(unsigned long main_clock) +{ at91_arch_reset = at91sam9_alt_reset; pm_power_off = at91sam9rl_poweroff; at91_extern_irq = (1 << AT91SAM9RL_ID_IRQ0); diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index c49262bddd8..c296045f2b6 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -155,10 +155,6 @@ void __init at91_add_device_usba(struct usba_platform_data *data) /* Pullup pin is handled internally by USB device peripheral */ - /* Clocks */ - at91_clock_associate("utmi_clk", &at91_usba_udc_device.dev, "hclk"); - at91_clock_associate("udphs_clk", &at91_usba_udc_device.dev, "pclk"); - platform_device_register(&at91_usba_udc_device); } #else @@ -605,10 +601,6 @@ static struct platform_device at91sam9rl_tcb_device = { static void __init at91_add_device_tc(void) { - /* this chip has a separate clock and irq for each TC channel */ - at91_clock_associate("tc0_clk", &at91sam9rl_tcb_device.dev, "t0_clk"); - at91_clock_associate("tc1_clk", &at91sam9rl_tcb_device.dev, "t1_clk"); - at91_clock_associate("tc2_clk", &at91sam9rl_tcb_device.dev, "t2_clk"); platform_device_register(&at91sam9rl_tcb_device); } #else @@ -892,12 +884,10 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) case AT91SAM9RL_ID_SSC0: pdev = &at91sam9rl_ssc0_device; configure_ssc0_pins(pins); - at91_clock_associate("ssc0_clk", &pdev->dev, "pclk"); break; case AT91SAM9RL_ID_SSC1: pdev = &at91sam9rl_ssc1_device; configure_ssc1_pins(pins); - at91_clock_associate("ssc1_clk", &pdev->dev, "pclk"); break; default: return; @@ -1141,37 +1131,34 @@ struct platform_device *atmel_default_console_device; /* the serial console devi void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { struct platform_device *pdev; + struct atmel_uart_data *pdata; switch (id) { case 0: /* DBGU */ pdev = &at91sam9rl_dbgu_device; configure_dbgu_pins(); - at91_clock_associate("mck", &pdev->dev, "usart"); break; case AT91SAM9RL_ID_US0: pdev = &at91sam9rl_uart0_device; configure_usart0_pins(pins); - at91_clock_associate("usart0_clk", &pdev->dev, "usart"); break; case AT91SAM9RL_ID_US1: pdev = &at91sam9rl_uart1_device; configure_usart1_pins(pins); - at91_clock_associate("usart1_clk", &pdev->dev, "usart"); break; case AT91SAM9RL_ID_US2: pdev = &at91sam9rl_uart2_device; configure_usart2_pins(pins); - at91_clock_associate("usart2_clk", &pdev->dev, "usart"); break; case AT91SAM9RL_ID_US3: pdev = &at91sam9rl_uart3_device; configure_usart3_pins(pins); - at91_clock_associate("usart3_clk", &pdev->dev, "usart"); break; default: return; } - pdev->id = portnr; /* update to mapped ID */ + pdata = pdev->dev.platform_data; + pdata->num = portnr; /* update to mapped ID */ if (portnr < ATMEL_MAX_UART) at91_uarts[portnr] = pdev; @@ -1179,8 +1166,10 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) void __init at91_set_serial_console(unsigned portnr) { - if (portnr < ATMEL_MAX_UART) + if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; + at91sam9rl_set_console_clock(portnr); + } } void __init at91_add_device_serial(void) diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c index ad3ec85b279..56ba3bd035a 100644 --- a/arch/arm/mach-at91/at91x40.c +++ b/arch/arm/mach-at91/at91x40.c @@ -37,11 +37,6 @@ unsigned long clk_get_rate(struct clk *clk) return AT91X40_MASTER_CLOCK; } -struct clk *clk_get(struct device *dev, const char *id) -{ - return NULL; -} - void __init at91x40_initialize(unsigned long main_clock) { at91_extern_irq = (1 << AT91X40_ID_IRQ0) | (1 << AT91X40_ID_IRQ1) diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c index 8a3fc84847c..ab1d463aa47 100644 --- a/arch/arm/mach-at91/board-1arm.c +++ b/arch/arm/mach-at91/board-1arm.c @@ -35,14 +35,18 @@ #include <mach/board.h> #include <mach/gpio.h> +#include <mach/cpu.h> #include "generic.h" -static void __init onearm_map_io(void) +static void __init onearm_init_early(void) { + /* Set cpu type: PQFP */ + at91rm9200_set_type(ARCH_REVISON_9200_PQFP); + /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000, AT91RM9200_PQFP); + at91rm9200_initialize(18432000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -92,9 +96,9 @@ static void __init onearm_board_init(void) MACHINE_START(ONEARM, "Ajeco 1ARM single board computer") /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = onearm_map_io, + .map_io = at91rm9200_map_io, + .init_early = onearm_init_early, .init_irq = onearm_init_irq, .init_machine = onearm_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c index cba7f7771fe..a4924de48c3 100644 --- a/arch/arm/mach-at91/board-afeb-9260v1.c +++ b/arch/arm/mach-at91/board-afeb-9260v1.c @@ -48,7 +48,7 @@ #include "generic.h" -static void __init afeb9260_map_io(void) +static void __init afeb9260_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91sam9260_initialize(18432000); @@ -218,9 +218,9 @@ static void __init afeb9260_board_init(void) MACHINE_START(AFEB9260, "Custom afeb9260 board") /* Maintainer: Sergey Lapin <slapin@ossfans.org> */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = afeb9260_map_io, + .map_io = at91sam9260_map_io, + .init_early = afeb9260_init_early, .init_irq = afeb9260_init_irq, .init_machine = afeb9260_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-at572d940hf_ek.c b/arch/arm/mach-at91/board-at572d940hf_ek.c deleted file mode 100644 index 3929f1c9e4e..00000000000 --- a/arch/arm/mach-at91/board-at572d940hf_ek.c +++ /dev/null @@ -1,326 +0,0 @@ -/* - * linux/arch/arm/mach-at91/board-at572d940hf_ek.c - * - * Copyright (C) 2008 Atmel Antonio R. Costa <costa.antonior@gmail.com> - * Copyright (C) 2005 SAN People - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/types.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/spi/spi.h> -#include <linux/spi/ds1305.h> -#include <linux/irq.h> -#include <linux/mtd/physmap.h> - -#include <mach/hardware.h> -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/irq.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <mach/board.h> -#include <mach/gpio.h> -#include <mach/at91sam9_smc.h> - -#include "sam9_smc.h" -#include "generic.h" - - -static void __init eb_map_io(void) -{ - /* Initialize processor: 12.500 MHz crystal */ - at572d940hf_initialize(12000000); - - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* USART0 on ttyS1. (Rx & Tx only) */ - at91_register_uart(AT572D940HF_ID_US0, 1, 0); - - /* USART1 on ttyS2. (Rx & Tx only) */ - at91_register_uart(AT572D940HF_ID_US1, 2, 0); - - /* USART2 on ttyS3. (Tx & Rx only */ - at91_register_uart(AT572D940HF_ID_US2, 3, 0); - - /* set serial console to ttyS0 (ie, DBGU) */ - at91_set_serial_console(0); -} - -static void __init eb_init_irq(void) -{ - at572d940hf_init_interrupts(NULL); -} - - -/* - * USB Host Port - */ -static struct at91_usbh_data __initdata eb_usbh_data = { - .ports = 2, -}; - - -/* - * USB Device Port - */ -static struct at91_udc_data __initdata eb_udc_data = { - .vbus_pin = 0, /* no VBUS detection,UDC always on */ - .pullup_pin = 0, /* pull-up driven by UDC */ -}; - - -/* - * MCI (SD/MMC) - */ -static struct at91_mmc_data __initdata eb_mmc_data = { - .wire4 = 1, -/* .det_pin = ... not connected */ -/* .wp_pin = ... not connected */ -/* .vcc_pin = ... not connected */ -}; - - -/* - * MACB Ethernet device - */ -static struct at91_eth_data __initdata eb_eth_data = { - .phy_irq_pin = AT91_PIN_PB25, - .is_rmii = 1, -}; - -/* - * NOR flash - */ - -static struct mtd_partition eb_nor_partitions[] = { - { - .name = "Raw Environment", - .offset = 0, - .size = SZ_4M, - .mask_flags = 0, - }, - { - .name = "OS FS", - .offset = MTDPART_OFS_APPEND, - .size = 3 * SZ_1M, - .mask_flags = 0, - }, - { - .name = "APP FS", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - .mask_flags = 0, - }, -}; - -static void nor_flash_set_vpp(struct map_info* mi, int i) { -}; - -static struct physmap_flash_data nor_flash_data = { - .width = 4, - .parts = eb_nor_partitions, - .nr_parts = ARRAY_SIZE(eb_nor_partitions), - .set_vpp = nor_flash_set_vpp, -}; - -static struct resource nor_flash_resources[] = { - { - .start = AT91_CHIPSELECT_0, - .end = AT91_CHIPSELECT_0 + SZ_16M - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device nor_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &nor_flash_data, - }, - .resource = nor_flash_resources, - .num_resources = ARRAY_SIZE(nor_flash_resources), -}; - -static struct sam9_smc_config __initdata eb_nor_smc_config = { - .ncs_read_setup = 1, - .nrd_setup = 1, - .ncs_write_setup = 1, - .nwe_setup = 1, - - .ncs_read_pulse = 7, - .nrd_pulse = 7, - .ncs_write_pulse = 7, - .nwe_pulse = 7, - - .read_cycle = 9, - .write_cycle = 9, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE | AT91_SMC_DBW_32, - .tdf_cycles = 1, -}; - -static void __init eb_add_device_nor(void) -{ - /* configure chip-select 0 (NOR) */ - sam9_smc_configure(0, &eb_nor_smc_config); - platform_device_register(&nor_flash); -} - -/* - * NAND flash - */ -static struct mtd_partition __initdata eb_nand_partition[] = { - { - .name = "Partition 1", - .offset = 0, - .size = SZ_16M, - }, - { - .name = "Partition 2", - .offset = MTDPART_OFS_NXTBLK, - .size = MTDPART_SIZ_FULL, - } -}; - -static struct mtd_partition * __init nand_partitions(int size, int *num_partitions) -{ - *num_partitions = ARRAY_SIZE(eb_nand_partition); - return eb_nand_partition; -} - -static struct atmel_nand_data __initdata eb_nand_data = { - .ale = 22, - .cle = 21, -/* .det_pin = ... not connected */ -/* .rdy_pin = AT91_PIN_PC16, */ - .enable_pin = AT91_PIN_PA15, - .partition_info = nand_partitions, -#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16) - .bus_width_16 = 1, -#else - .bus_width_16 = 0, -#endif -}; - -static struct sam9_smc_config __initdata eb_nand_smc_config = { - .ncs_read_setup = 0, - .nrd_setup = 0, - .ncs_write_setup = 1, - .nwe_setup = 1, - - .ncs_read_pulse = 3, - .nrd_pulse = 3, - .ncs_write_pulse = 3, - .nwe_pulse = 3, - - .read_cycle = 5, - .write_cycle = 5, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE, - .tdf_cycles = 12, -}; - -static void __init eb_add_device_nand(void) -{ - /* setup bus-width (8 or 16) */ - if (eb_nand_data.bus_width_16) - eb_nand_smc_config.mode |= AT91_SMC_DBW_16; - else - eb_nand_smc_config.mode |= AT91_SMC_DBW_8; - - /* configure chip-select 3 (NAND) */ - sam9_smc_configure(3, &eb_nand_smc_config); - - at91_add_device_nand(&eb_nand_data); -} - - -/* - * SPI devices - */ -static struct resource rtc_resources[] = { - [0] = { - .start = AT572D940HF_ID_IRQ1, - .end = AT572D940HF_ID_IRQ1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct ds1305_platform_data ds1306_data = { - .is_ds1306 = true, - .en_1hz = false, -}; - -static struct spi_board_info eb_spi_devices[] = { - { /* RTC Dallas DS1306 */ - .modalias = "rtc-ds1305", - .chip_select = 3, - .mode = SPI_CS_HIGH | SPI_CPOL | SPI_CPHA, - .max_speed_hz = 500000, - .bus_num = 0, - .irq = AT572D940HF_ID_IRQ1, - .platform_data = (void *) &ds1306_data, - }, -#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD) - { /* Dataflash card */ - .modalias = "mtd_dataflash", - .chip_select = 0, - .max_speed_hz = 15 * 1000 * 1000, - .bus_num = 0, - }, -#endif -}; - -static void __init eb_board_init(void) -{ - /* Serial */ - at91_add_device_serial(); - /* USB Host */ - at91_add_device_usbh(&eb_usbh_data); - /* USB Device */ - at91_add_device_udc(&eb_udc_data); - /* I2C */ - at91_add_device_i2c(NULL, 0); - /* NOR */ - eb_add_device_nor(); - /* NAND */ - eb_add_device_nand(); - /* SPI */ - at91_add_device_spi(eb_spi_devices, ARRAY_SIZE(eb_spi_devices)); - /* MMC */ - at91_add_device_mmc(0, &eb_mmc_data); - /* Ethernet */ - at91_add_device_eth(&eb_eth_data); - /* mAgic */ - at91_add_device_mAgic(); -} - -MACHINE_START(AT572D940HFEB, "Atmel AT91D940HF-EB") - /* Maintainer: Atmel <costa.antonior@gmail.com> */ - .boot_params = AT91_SDRAM_BASE + 0x100, - .timer = &at91sam926x_timer, - .map_io = eb_map_io, - .init_irq = eb_init_irq, - .init_machine = eb_board_init, -MACHINE_END diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c index b54e3e6fceb..148fccb9a25 100644 --- a/arch/arm/mach-at91/board-cam60.c +++ b/arch/arm/mach-at91/board-cam60.c @@ -45,7 +45,7 @@ #include "generic.h" -static void __init cam60_map_io(void) +static void __init cam60_init_early(void) { /* Initialize processor: 10 MHz crystal */ at91sam9260_initialize(10000000); @@ -198,9 +198,9 @@ static void __init cam60_board_init(void) MACHINE_START(CAM60, "KwikByte CAM60") /* Maintainer: KwikByte */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = cam60_map_io, + .map_io = at91sam9260_map_io, + .init_early = cam60_init_early, .init_irq = cam60_init_irq, .init_machine = cam60_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c index e7274440ead..1904fdf8761 100644 --- a/arch/arm/mach-at91/board-cap9adk.c +++ b/arch/arm/mach-at91/board-cap9adk.c @@ -44,12 +44,13 @@ #include <mach/gpio.h> #include <mach/at91cap9_matrix.h> #include <mach/at91sam9_smc.h> +#include <mach/system_rev.h> #include "sam9_smc.h" #include "generic.h" -static void __init cap9adk_map_io(void) +static void __init cap9adk_init_early(void) { /* Initialize processor: 12 MHz crystal */ at91cap9_initialize(12000000); @@ -187,11 +188,6 @@ static struct atmel_nand_data __initdata cap9adk_nand_data = { // .rdy_pin = ... not connected .enable_pin = AT91_PIN_PD15, .partition_info = nand_partitions, -#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16) - .bus_width_16 = 1, -#else - .bus_width_16 = 0, -#endif }; static struct sam9_smc_config __initdata cap9adk_nand_smc_config = { @@ -219,6 +215,7 @@ static void __init cap9adk_add_device_nand(void) csa = at91_sys_read(AT91_MATRIX_EBICSA); at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V); + cap9adk_nand_data.bus_width_16 = !board_have_nand_8bit(); /* setup bus-width (8 or 16) */ if (cap9adk_nand_data.bus_width_16) cap9adk_nand_smc_config.mode |= AT91_SMC_DBW_16; @@ -399,9 +396,9 @@ static void __init cap9adk_board_init(void) MACHINE_START(AT91CAP9ADK, "Atmel AT91CAP9A-DK") /* Maintainer: Stelian Pop <stelian.pop@leadtechdesign.com> */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = cap9adk_map_io, + .map_io = at91cap9_map_io, + .init_early = cap9adk_init_early, .init_irq = cap9adk_init_irq, .init_machine = cap9adk_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c index 295e1e77fa6..f36b1868749 100644 --- a/arch/arm/mach-at91/board-carmeva.c +++ b/arch/arm/mach-at91/board-carmeva.c @@ -40,10 +40,10 @@ #include "generic.h" -static void __init carmeva_map_io(void) +static void __init carmeva_init_early(void) { /* Initialize processor: 20.000 MHz crystal */ - at91rm9200_initialize(20000000, AT91RM9200_BGA); + at91rm9200_initialize(20000000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -162,9 +162,9 @@ static void __init carmeva_board_init(void) MACHINE_START(CARMEVA, "Carmeva") /* Maintainer: Conitec Datasystems */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = carmeva_map_io, + .map_io = at91rm9200_map_io, + .init_early = carmeva_init_early, .init_irq = carmeva_init_irq, .init_machine = carmeva_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c index 3838594578f..980511084fe 100644 --- a/arch/arm/mach-at91/board-cpu9krea.c +++ b/arch/arm/mach-at91/board-cpu9krea.c @@ -47,7 +47,7 @@ #include "sam9_smc.h" #include "generic.h" -static void __init cpu9krea_map_io(void) +static void __init cpu9krea_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91sam9260_initialize(18432000); @@ -375,9 +375,9 @@ MACHINE_START(CPUAT9260, "Eukrea CPU9260") MACHINE_START(CPUAT9G20, "Eukrea CPU9G20") #endif /* Maintainer: Eric Benard - EUKREA Electromatique */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = cpu9krea_map_io, + .map_io = at91sam9260_map_io, + .init_early = cpu9krea_init_early, .init_irq = cpu9krea_init_irq, .init_machine = cpu9krea_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c index 2f4dd8cdd48..6daabe3907a 100644 --- a/arch/arm/mach-at91/board-cpuat91.c +++ b/arch/arm/mach-at91/board-cpuat91.c @@ -38,6 +38,7 @@ #include <mach/board.h> #include <mach/gpio.h> #include <mach/at91rm9200_mc.h> +#include <mach/cpu.h> #include "generic.h" @@ -50,10 +51,13 @@ static struct gpio_led cpuat91_leds[] = { }, }; -static void __init cpuat91_map_io(void) +static void __init cpuat91_init_early(void) { + /* Set cpu type: PQFP */ + at91rm9200_set_type(ARCH_REVISON_9200_PQFP); + /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000, AT91RM9200_PQFP); + at91rm9200_initialize(18432000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -175,9 +179,9 @@ static void __init cpuat91_board_init(void) MACHINE_START(CPUAT91, "Eukrea") /* Maintainer: Eric Benard - EUKREA Electromatique */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = cpuat91_map_io, + .map_io = at91rm9200_map_io, + .init_early = cpuat91_init_early, .init_irq = cpuat91_init_irq, .init_machine = cpuat91_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c index 464839dc39b..d98bcec1dfe 100644 --- a/arch/arm/mach-at91/board-csb337.c +++ b/arch/arm/mach-at91/board-csb337.c @@ -43,10 +43,10 @@ #include "generic.h" -static void __init csb337_map_io(void) +static void __init csb337_init_early(void) { /* Initialize processor: 3.6864 MHz crystal */ - at91rm9200_initialize(3686400, AT91RM9200_BGA); + at91rm9200_initialize(3686400); /* Setup the LEDs */ at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1); @@ -257,9 +257,9 @@ static void __init csb337_board_init(void) MACHINE_START(CSB337, "Cogent CSB337") /* Maintainer: Bill Gatliff */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = csb337_map_io, + .map_io = at91rm9200_map_io, + .init_early = csb337_init_early, .init_irq = csb337_init_irq, .init_machine = csb337_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c index 431688c6141..019aab4e20b 100644 --- a/arch/arm/mach-at91/board-csb637.c +++ b/arch/arm/mach-at91/board-csb637.c @@ -40,10 +40,10 @@ #include "generic.h" -static void __init csb637_map_io(void) +static void __init csb637_init_early(void) { /* Initialize processor: 3.6864 MHz crystal */ - at91rm9200_initialize(3686400, AT91RM9200_BGA); + at91rm9200_initialize(3686400); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -138,9 +138,9 @@ static void __init csb637_board_init(void) MACHINE_START(CSB637, "Cogent CSB637") /* Maintainer: Bill Gatliff */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = csb637_map_io, + .map_io = at91rm9200_map_io, + .init_early = csb637_init_early, .init_irq = csb637_init_irq, .init_machine = csb637_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-eb01.c b/arch/arm/mach-at91/board-eb01.c index d8df59a3426..d2023f27c65 100644 --- a/arch/arm/mach-at91/board-eb01.c +++ b/arch/arm/mach-at91/board-eb01.c @@ -35,7 +35,7 @@ static void __init at91eb01_init_irq(void) at91x40_init_interrupts(NULL); } -static void __init at91eb01_map_io(void) +static void __init at91eb01_init_early(void) { at91x40_initialize(40000000); } @@ -43,7 +43,7 @@ static void __init at91eb01_map_io(void) MACHINE_START(AT91EB01, "Atmel AT91 EB01") /* Maintainer: Greg Ungerer <gerg@snapgear.com> */ .timer = &at91x40_timer, + .init_early = at91eb01_init_early, .init_irq = at91eb01_init_irq, - .map_io = at91eb01_map_io, MACHINE_END diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c index 6cf6566ae34..e9484535cbc 100644 --- a/arch/arm/mach-at91/board-eb9200.c +++ b/arch/arm/mach-at91/board-eb9200.c @@ -40,10 +40,10 @@ #include "generic.h" -static void __init eb9200_map_io(void) +static void __init eb9200_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000, AT91RM9200_BGA); + at91rm9200_initialize(18432000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -120,9 +120,9 @@ static void __init eb9200_board_init(void) } MACHINE_START(ATEB9200, "Embest ATEB9200") - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = eb9200_map_io, + .map_io = at91rm9200_map_io, + .init_early = eb9200_init_early, .init_irq = eb9200_init_irq, .init_machine = eb9200_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c index de2fd04e7c8..a6f57faa10a 100644 --- a/arch/arm/mach-at91/board-ecbat91.c +++ b/arch/arm/mach-at91/board-ecbat91.c @@ -38,14 +38,18 @@ #include <mach/board.h> #include <mach/gpio.h> +#include <mach/cpu.h> #include "generic.h" -static void __init ecb_at91map_io(void) +static void __init ecb_at91init_early(void) { + /* Set cpu type: PQFP */ + at91rm9200_set_type(ARCH_REVISON_9200_PQFP); + /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000, AT91RM9200_PQFP); + at91rm9200_initialize(18432000); /* Setup the LEDs */ at91_init_leds(AT91_PIN_PC7, AT91_PIN_PC7); @@ -168,9 +172,9 @@ static void __init ecb_at91board_init(void) MACHINE_START(ECBAT91, "emQbit's ECB_AT91") /* Maintainer: emQbit.com */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = ecb_at91map_io, + .map_io = at91rm9200_map_io, + .init_early = ecb_at91init_early, .init_irq = ecb_at91init_irq, .init_machine = ecb_at91board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c index a158a0ce458..bfc0062d148 100644 --- a/arch/arm/mach-at91/board-eco920.c +++ b/arch/arm/mach-at91/board-eco920.c @@ -26,11 +26,16 @@ #include <mach/board.h> #include <mach/at91rm9200_mc.h> +#include <mach/cpu.h> + #include "generic.h" -static void __init eco920_map_io(void) +static void __init eco920_init_early(void) { - at91rm9200_initialize(18432000, AT91RM9200_PQFP); + /* Set cpu type: PQFP */ + at91rm9200_set_type(ARCH_REVISON_9200_PQFP); + + at91rm9200_initialize(18432000); /* Setup the LEDs */ at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1); @@ -86,21 +91,6 @@ static struct platform_device eco920_flash = { .num_resources = 1, }; -static struct resource at91_beeper_resources[] = { - [0] = { - .start = AT91RM9200_BASE_TC3, - .end = AT91RM9200_BASE_TC3 + 0x39, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device at91_beeper = { - .name = "at91_beeper", - .id = 0, - .resource = at91_beeper_resources, - .num_resources = ARRAY_SIZE(at91_beeper_resources), -}; - static struct spi_board_info eco920_spi_devices[] = { { /* CAN controller */ .modalias = "tlv5638", @@ -139,18 +129,14 @@ static void __init eco920_board_init(void) AT91_SMC_TDF_(1) /* float time */ ); - at91_clock_associate("tc3_clk", &at91_beeper.dev, "at91_beeper"); - at91_set_B_periph(AT91_PIN_PB6, 0); - platform_device_register(&at91_beeper); - at91_add_device_spi(eco920_spi_devices, ARRAY_SIZE(eco920_spi_devices)); } MACHINE_START(ECO920, "eco920") /* Maintainer: Sascha Hauer */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = eco920_map_io, + .map_io = at91rm9200_map_io, + .init_early = eco920_init_early, .init_irq = eco920_init_irq, .init_machine = eco920_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c index c8a62dc8fa6..466c063b8d2 100644 --- a/arch/arm/mach-at91/board-flexibity.c +++ b/arch/arm/mach-at91/board-flexibity.c @@ -37,7 +37,7 @@ #include "generic.h" -static void __init flexibity_map_io(void) +static void __init flexibity_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91sam9260_initialize(18432000); @@ -154,9 +154,9 @@ static void __init flexibity_board_init(void) MACHINE_START(FLEXIBITY, "Flexibity Connect") /* Maintainer: Maxim Osipov */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = flexibity_map_io, + .map_io = at91sam9260_map_io, + .init_early = flexibity_init_early, .init_irq = flexibity_init_irq, .init_machine = flexibity_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c index dfc7dfe738e..e2d1dc9eff4 100644 --- a/arch/arm/mach-at91/board-foxg20.c +++ b/arch/arm/mach-at91/board-foxg20.c @@ -57,7 +57,7 @@ */ -static void __init foxg20_map_io(void) +static void __init foxg20_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91sam9260_initialize(18432000); @@ -266,9 +266,9 @@ static void __init foxg20_board_init(void) MACHINE_START(ACMENETUSFOXG20, "Acme Systems srl FOX Board G20") /* Maintainer: Sergio Tanzilli */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = foxg20_map_io, + .map_io = at91sam9260_map_io, + .init_early = foxg20_init_early, .init_irq = foxg20_init_irq, .init_machine = foxg20_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-gsia18s.c b/arch/arm/mach-at91/board-gsia18s.c index bc28136ee24..1d4f36b3cb2 100644 --- a/arch/arm/mach-at91/board-gsia18s.c +++ b/arch/arm/mach-at91/board-gsia18s.c @@ -38,9 +38,9 @@ #include "sam9_smc.h" #include "generic.h" -static void __init gsia18s_map_io(void) +static void __init gsia18s_init_early(void) { - stamp9g20_map_io(); + stamp9g20_init_early(); /* * USART0 on ttyS1 (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI). @@ -576,9 +576,9 @@ static void __init gsia18s_board_init(void) } MACHINE_START(GSIA18S, "GS_IA18_S") - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = gsia18s_map_io, + .map_io = at91sam9260_map_io, + .init_early = gsia18s_init_early, .init_irq = init_irq, .init_machine = gsia18s_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c index d2e1f4ec1fc..9b003ff744b 100644 --- a/arch/arm/mach-at91/board-kafa.c +++ b/arch/arm/mach-at91/board-kafa.c @@ -35,14 +35,18 @@ #include <mach/board.h> #include <mach/gpio.h> +#include <mach/cpu.h> #include "generic.h" -static void __init kafa_map_io(void) +static void __init kafa_init_early(void) { + /* Set cpu type: PQFP */ + at91rm9200_set_type(ARCH_REVISON_9200_PQFP); + /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000, AT91RM9200_PQFP); + at91rm9200_initialize(18432000); /* Set up the LEDs */ at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4); @@ -94,9 +98,9 @@ static void __init kafa_board_init(void) MACHINE_START(KAFA, "Sperry-Sun KAFA") /* Maintainer: Sergei Sharonov */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = kafa_map_io, + .map_io = at91rm9200_map_io, + .init_early = kafa_init_early, .init_irq = kafa_init_irq, .init_machine = kafa_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c index a13d2063faf..a813a74b65f 100644 --- a/arch/arm/mach-at91/board-kb9202.c +++ b/arch/arm/mach-at91/board-kb9202.c @@ -36,16 +36,19 @@ #include <mach/board.h> #include <mach/gpio.h> - +#include <mach/cpu.h> #include <mach/at91rm9200_mc.h> #include "generic.h" -static void __init kb9202_map_io(void) +static void __init kb9202_init_early(void) { + /* Set cpu type: PQFP */ + at91rm9200_set_type(ARCH_REVISON_9200_PQFP); + /* Initialize processor: 10 MHz crystal */ - at91rm9200_initialize(10000000, AT91RM9200_PQFP); + at91rm9200_initialize(10000000); /* Set up the LEDs */ at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18); @@ -136,9 +139,9 @@ static void __init kb9202_board_init(void) MACHINE_START(KB9200, "KB920x") /* Maintainer: KwikByte, Inc. */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = kb9202_map_io, + .map_io = at91rm9200_map_io, + .init_early = kb9202_init_early, .init_irq = kb9202_init_irq, .init_machine = kb9202_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c index fe5f1d47e6e..961e805db68 100644 --- a/arch/arm/mach-at91/board-neocore926.c +++ b/arch/arm/mach-at91/board-neocore926.c @@ -51,7 +51,7 @@ #include "generic.h" -static void __init neocore926_map_io(void) +static void __init neocore926_init_early(void) { /* Initialize processor: 20 MHz crystal */ at91sam9263_initialize(20000000); @@ -387,9 +387,9 @@ static void __init neocore926_board_init(void) MACHINE_START(NEOCORE926, "ADENEO NEOCORE 926") /* Maintainer: ADENEO */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = neocore926_map_io, + .map_io = at91sam9263_map_io, + .init_early = neocore926_init_early, .init_irq = neocore926_init_irq, .init_machine = neocore926_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c index feb65787c30..21a21af2587 100644 --- a/arch/arm/mach-at91/board-pcontrol-g20.c +++ b/arch/arm/mach-at91/board-pcontrol-g20.c @@ -37,9 +37,9 @@ #include "generic.h" -static void __init pcontrol_g20_map_io(void) +static void __init pcontrol_g20_init_early(void) { - stamp9g20_map_io(); + stamp9g20_init_early(); /* USART0 on ttyS1. (Rx, Tx, CTS, RTS) piggyback A2 */ at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS @@ -222,9 +222,9 @@ static void __init pcontrol_g20_board_init(void) MACHINE_START(PCONTROL_G20, "PControl G20") /* Maintainer: pgsellmann@portner-elektronik.at */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = pcontrol_g20_map_io, + .map_io = at91sam9260_map_io, + .init_early = pcontrol_g20_init_early, .init_irq = init_irq, .init_machine = pcontrol_g20_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c index 55dad3a4654..756cc2a745d 100644 --- a/arch/arm/mach-at91/board-picotux200.c +++ b/arch/arm/mach-at91/board-picotux200.c @@ -43,10 +43,10 @@ #include "generic.h" -static void __init picotux200_map_io(void) +static void __init picotux200_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000, AT91RM9200_BGA); + at91rm9200_initialize(18432000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -123,9 +123,9 @@ static void __init picotux200_board_init(void) MACHINE_START(PICOTUX2XX, "picotux 200") /* Maintainer: Kleinhenz Elektronik GmbH */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = picotux200_map_io, + .map_io = at91rm9200_map_io, + .init_early = picotux200_init_early, .init_irq = picotux200_init_irq, .init_machine = picotux200_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c index 69d15a875b6..d1a6001b0bd 100644 --- a/arch/arm/mach-at91/board-qil-a9260.c +++ b/arch/arm/mach-at91/board-qil-a9260.c @@ -48,7 +48,7 @@ #include "generic.h" -static void __init ek_map_io(void) +static void __init ek_init_early(void) { /* Initialize processor: 12.000 MHz crystal */ at91sam9260_initialize(12000000); @@ -268,9 +268,9 @@ static void __init ek_board_init(void) MACHINE_START(QIL_A9260, "CALAO QIL_A9260") /* Maintainer: calao-systems */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = ek_map_io, + .map_io = at91sam9260_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c index 4c1047c8200..aef9627710b 100644 --- a/arch/arm/mach-at91/board-rm9200dk.c +++ b/arch/arm/mach-at91/board-rm9200dk.c @@ -45,10 +45,10 @@ #include "generic.h" -static void __init dk_map_io(void) +static void __init dk_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000, AT91RM9200_BGA); + at91rm9200_initialize(18432000); /* Setup the LEDs */ at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2); @@ -227,9 +227,9 @@ static void __init dk_board_init(void) MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK") /* Maintainer: SAN People/Atmel */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = dk_map_io, + .map_io = at91rm9200_map_io, + .init_early = dk_init_early, .init_irq = dk_init_irq, .init_machine = dk_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c index 9df1be8818c..015a0218308 100644 --- a/arch/arm/mach-at91/board-rm9200ek.c +++ b/arch/arm/mach-at91/board-rm9200ek.c @@ -45,10 +45,10 @@ #include "generic.h" -static void __init ek_map_io(void) +static void __init ek_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000, AT91RM9200_BGA); + at91rm9200_initialize(18432000); /* Setup the LEDs */ at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2); @@ -193,9 +193,9 @@ static void __init ek_board_init(void) MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK") /* Maintainer: SAN People/Atmel */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = ek_map_io, + .map_io = at91rm9200_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c index 25a26beaa72..aaf1bf0989b 100644 --- a/arch/arm/mach-at91/board-sam9-l9260.c +++ b/arch/arm/mach-at91/board-sam9-l9260.c @@ -44,7 +44,7 @@ #include "generic.h" -static void __init ek_map_io(void) +static void __init ek_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91sam9260_initialize(18432000); @@ -212,9 +212,9 @@ static void __init ek_board_init(void) MACHINE_START(SAM9_L9260, "Olimex SAM9-L9260") /* Maintainer: Olimex */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = ek_map_io, + .map_io = at91sam9260_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c index de1816e0e1d..d600dc12322 100644 --- a/arch/arm/mach-at91/board-sam9260ek.c +++ b/arch/arm/mach-at91/board-sam9260ek.c @@ -44,12 +44,13 @@ #include <mach/gpio.h> #include <mach/at91sam9_smc.h> #include <mach/at91_shdwc.h> +#include <mach/system_rev.h> #include "sam9_smc.h" #include "generic.h" -static void __init ek_map_io(void) +static void __init ek_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91sam9260_initialize(18432000); @@ -191,11 +192,6 @@ static struct atmel_nand_data __initdata ek_nand_data = { .rdy_pin = AT91_PIN_PC13, .enable_pin = AT91_PIN_PC14, .partition_info = nand_partitions, -#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16) - .bus_width_16 = 1, -#else - .bus_width_16 = 0, -#endif }; static struct sam9_smc_config __initdata ek_nand_smc_config = { @@ -218,6 +214,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = { static void __init ek_add_device_nand(void) { + ek_nand_data.bus_width_16 = !board_have_nand_8bit(); /* setup bus-width (8 or 16) */ if (ek_nand_data.bus_width_16) ek_nand_smc_config.mode |= AT91_SMC_DBW_16; @@ -356,9 +353,9 @@ static void __init ek_board_init(void) MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK") /* Maintainer: Atmel */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = ek_map_io, + .map_io = at91sam9260_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index 14acc901e24..f897f84d43d 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -48,12 +48,13 @@ #include <mach/gpio.h> #include <mach/at91sam9_smc.h> #include <mach/at91_shdwc.h> +#include <mach/system_rev.h> #include "sam9_smc.h" #include "generic.h" -static void __init ek_map_io(void) +static void __init ek_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91sam9261_initialize(18432000); @@ -197,11 +198,6 @@ static struct atmel_nand_data __initdata ek_nand_data = { .rdy_pin = AT91_PIN_PC15, .enable_pin = AT91_PIN_PC14, .partition_info = nand_partitions, -#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16) - .bus_width_16 = 1, -#else - .bus_width_16 = 0, -#endif }; static struct sam9_smc_config __initdata ek_nand_smc_config = { @@ -224,6 +220,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = { static void __init ek_add_device_nand(void) { + ek_nand_data.bus_width_16 = !board_have_nand_8bit(); /* setup bus-width (8 or 16) */ if (ek_nand_data.bus_width_16) ek_nand_smc_config.mode |= AT91_SMC_DBW_16; @@ -623,9 +620,9 @@ MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK") MACHINE_START(AT91SAM9G10EK, "Atmel AT91SAM9G10-EK") #endif /* Maintainer: Atmel */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = ek_map_io, + .map_io = at91sam9261_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index bfe490df58b..605b26f40a4 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -47,12 +47,13 @@ #include <mach/gpio.h> #include <mach/at91sam9_smc.h> #include <mach/at91_shdwc.h> +#include <mach/system_rev.h> #include "sam9_smc.h" #include "generic.h" -static void __init ek_map_io(void) +static void __init ek_init_early(void) { /* Initialize processor: 16.367 MHz crystal */ at91sam9263_initialize(16367660); @@ -198,11 +199,6 @@ static struct atmel_nand_data __initdata ek_nand_data = { .rdy_pin = AT91_PIN_PA22, .enable_pin = AT91_PIN_PD15, .partition_info = nand_partitions, -#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16) - .bus_width_16 = 1, -#else - .bus_width_16 = 0, -#endif }; static struct sam9_smc_config __initdata ek_nand_smc_config = { @@ -225,6 +221,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = { static void __init ek_add_device_nand(void) { + ek_nand_data.bus_width_16 = !board_have_nand_8bit(); /* setup bus-width (8 or 16) */ if (ek_nand_data.bus_width_16) ek_nand_smc_config.mode |= AT91_SMC_DBW_16; @@ -454,9 +451,9 @@ static void __init ek_board_init(void) MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK") /* Maintainer: Atmel */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = ek_map_io, + .map_io = at91sam9263_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c index ca8198b3c16..7624cf0d006 100644 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ b/arch/arm/mach-at91/board-sam9g20ek.c @@ -43,6 +43,7 @@ #include <mach/board.h> #include <mach/gpio.h> #include <mach/at91sam9_smc.h> +#include <mach/system_rev.h> #include "sam9_smc.h" #include "generic.h" @@ -60,7 +61,7 @@ static int inline ek_have_2mmc(void) } -static void __init ek_map_io(void) +static void __init ek_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91sam9260_initialize(18432000); @@ -175,11 +176,6 @@ static struct atmel_nand_data __initdata ek_nand_data = { .rdy_pin = AT91_PIN_PC13, .enable_pin = AT91_PIN_PC14, .partition_info = nand_partitions, -#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16) - .bus_width_16 = 1, -#else - .bus_width_16 = 0, -#endif }; static struct sam9_smc_config __initdata ek_nand_smc_config = { @@ -202,6 +198,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = { static void __init ek_add_device_nand(void) { + ek_nand_data.bus_width_16 = !board_have_nand_8bit(); /* setup bus-width (8 or 16) */ if (ek_nand_data.bus_width_16) ek_nand_smc_config.mode |= AT91_SMC_DBW_16; @@ -406,18 +403,18 @@ static void __init ek_board_init(void) MACHINE_START(AT91SAM9G20EK, "Atmel AT91SAM9G20-EK") /* Maintainer: Atmel */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = ek_map_io, + .map_io = at91sam9260_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END MACHINE_START(AT91SAM9G20EK_2MMC, "Atmel AT91SAM9G20-EK 2 MMC Slot Mod") /* Maintainer: Atmel */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = ek_map_io, + .map_io = at91sam9260_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c index 6c999dbd2bc..063c95d0e8f 100644 --- a/arch/arm/mach-at91/board-sam9m10g45ek.c +++ b/arch/arm/mach-at91/board-sam9m10g45ek.c @@ -41,12 +41,13 @@ #include <mach/gpio.h> #include <mach/at91sam9_smc.h> #include <mach/at91_shdwc.h> +#include <mach/system_rev.h> #include "sam9_smc.h" #include "generic.h" -static void __init ek_map_io(void) +static void __init ek_init_early(void) { /* Initialize processor: 12.000 MHz crystal */ at91sam9g45_initialize(12000000); @@ -155,11 +156,6 @@ static struct atmel_nand_data __initdata ek_nand_data = { .rdy_pin = AT91_PIN_PC8, .enable_pin = AT91_PIN_PC14, .partition_info = nand_partitions, -#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16) - .bus_width_16 = 1, -#else - .bus_width_16 = 0, -#endif }; static struct sam9_smc_config __initdata ek_nand_smc_config = { @@ -182,6 +178,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = { static void __init ek_add_device_nand(void) { + ek_nand_data.bus_width_16 = !board_have_nand_8bit(); /* setup bus-width (8 or 16) */ if (ek_nand_data.bus_width_16) ek_nand_smc_config.mode |= AT91_SMC_DBW_16; @@ -424,9 +421,9 @@ static void __init ek_board_init(void) MACHINE_START(AT91SAM9M10G45EK, "Atmel AT91SAM9M10G45-EK") /* Maintainer: Atmel */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = ek_map_io, + .map_io = at91sam9g45_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c index 3bf3408e94c..effb399a80a 100644 --- a/arch/arm/mach-at91/board-sam9rlek.c +++ b/arch/arm/mach-at91/board-sam9rlek.c @@ -38,7 +38,7 @@ #include "generic.h" -static void __init ek_map_io(void) +static void __init ek_init_early(void) { /* Initialize processor: 12.000 MHz crystal */ at91sam9rl_initialize(12000000); @@ -329,9 +329,9 @@ static void __init ek_board_init(void) MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK") /* Maintainer: Atmel */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = ek_map_io, + .map_io = at91sam9rl_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c index 17f7d9b3214..3eb0a1153cc 100644 --- a/arch/arm/mach-at91/board-snapper9260.c +++ b/arch/arm/mach-at91/board-snapper9260.c @@ -40,7 +40,7 @@ #define SNAPPER9260_IO_EXP_GPIO(x) (NR_BUILTIN_GPIO + (x)) -static void __init snapper9260_map_io(void) +static void __init snapper9260_init_early(void) { at91sam9260_initialize(18432000); @@ -178,9 +178,9 @@ static void __init snapper9260_board_init(void) } MACHINE_START(SNAPPER_9260, "Bluewater Systems Snapper 9260/9G20 module") - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = snapper9260_map_io, + .map_io = at91sam9260_map_io, + .init_early = snapper9260_init_early, .init_irq = snapper9260_init_irq, .init_machine = snapper9260_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c index f8902b11896..5e5c85688f5 100644 --- a/arch/arm/mach-at91/board-stamp9g20.c +++ b/arch/arm/mach-at91/board-stamp9g20.c @@ -32,7 +32,7 @@ #include "generic.h" -void __init stamp9g20_map_io(void) +void __init stamp9g20_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91sam9260_initialize(18432000); @@ -44,9 +44,9 @@ void __init stamp9g20_map_io(void) at91_set_serial_console(0); } -static void __init stamp9g20evb_map_io(void) +static void __init stamp9g20evb_init_early(void) { - stamp9g20_map_io(); + stamp9g20_init_early(); /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS @@ -54,9 +54,9 @@ static void __init stamp9g20evb_map_io(void) | ATMEL_UART_DCD | ATMEL_UART_RI); } -static void __init portuxg20_map_io(void) +static void __init portuxg20_init_early(void) { - stamp9g20_map_io(); + stamp9g20_init_early(); /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS @@ -298,18 +298,18 @@ static void __init stamp9g20evb_board_init(void) MACHINE_START(PORTUXG20, "taskit PortuxG20") /* Maintainer: taskit GmbH */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = portuxg20_map_io, + .map_io = at91sam9260_map_io, + .init_early = portuxg20_init_early, .init_irq = init_irq, .init_machine = portuxg20_board_init, MACHINE_END MACHINE_START(STAMP9G20, "taskit Stamp9G20") /* Maintainer: taskit GmbH */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = stamp9g20evb_map_io, + .map_io = at91sam9260_map_io, + .init_early = stamp9g20evb_init_early, .init_irq = init_irq, .init_machine = stamp9g20evb_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-usb-a9260.c b/arch/arm/mach-at91/board-usb-a9260.c index 07784baeae8..0e784e6fede 100644 --- a/arch/arm/mach-at91/board-usb-a9260.c +++ b/arch/arm/mach-at91/board-usb-a9260.c @@ -48,7 +48,7 @@ #include "generic.h" -static void __init ek_map_io(void) +static void __init ek_init_early(void) { /* Initialize processor: 12.000 MHz crystal */ at91sam9260_initialize(12000000); @@ -228,9 +228,9 @@ static void __init ek_board_init(void) MACHINE_START(USB_A9260, "CALAO USB_A9260") /* Maintainer: calao-systems */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = ek_map_io, + .map_io = at91sam9260_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-usb-a9263.c b/arch/arm/mach-at91/board-usb-a9263.c index b614508931f..cf626dd14b2 100644 --- a/arch/arm/mach-at91/board-usb-a9263.c +++ b/arch/arm/mach-at91/board-usb-a9263.c @@ -47,7 +47,7 @@ #include "generic.h" -static void __init ek_map_io(void) +static void __init ek_init_early(void) { /* Initialize processor: 12.00 MHz crystal */ at91sam9263_initialize(12000000); @@ -244,9 +244,9 @@ static void __init ek_board_init(void) MACHINE_START(USB_A9263, "CALAO USB_A9263") /* Maintainer: calao-systems */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = ek_map_io, + .map_io = at91sam9263_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c index e0f0080eb63..c208cc334d7 100644 --- a/arch/arm/mach-at91/board-yl-9200.c +++ b/arch/arm/mach-at91/board-yl-9200.c @@ -45,14 +45,18 @@ #include <mach/board.h> #include <mach/gpio.h> #include <mach/at91rm9200_mc.h> +#include <mach/cpu.h> #include "generic.h" -static void __init yl9200_map_io(void) +static void __init yl9200_init_early(void) { + /* Set cpu type: PQFP */ + at91rm9200_set_type(ARCH_REVISON_9200_PQFP); + /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000, AT91RM9200_PQFP); + at91rm9200_initialize(18432000); /* Setup the LEDs D2=PB17 (timer), D3=PB16 (cpu) */ at91_init_leds(AT91_PIN_PB16, AT91_PIN_PB17); @@ -594,9 +598,9 @@ static void __init yl9200_board_init(void) MACHINE_START(YL9200, "uCdragon YL-9200") /* Maintainer: S.Birtles */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = yl9200_map_io, + .map_io = at91rm9200_map_io, + .init_early = yl9200_init_early, .init_irq = yl9200_init_irq, .init_machine = yl9200_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c index 9113da6845f..61873f3aa92 100644 --- a/arch/arm/mach-at91/clock.c +++ b/arch/arm/mach-at91/clock.c @@ -163,7 +163,7 @@ static struct clk udpck = { .parent = &pllb, .mode = pmc_sys_mode, }; -static struct clk utmi_clk = { +struct clk utmi_clk = { .name = "utmi_clk", .parent = &main_clk, .pmc_mask = AT91_PMC_UPLLEN, /* in CKGR_UCKR */ @@ -182,7 +182,7 @@ static struct clk uhpck = { * memory, interfaces to on-chip peripherals, the AIC, and sometimes more * (e.g baud rate generation). It's sourced from one of the primary clocks. */ -static struct clk mck = { +struct clk mck = { .name = "mck", .pmc_mask = AT91_PMC_MCKRDY, /* in PMC_SR */ }; @@ -215,43 +215,6 @@ static struct clk __init *at91_css_to_clk(unsigned long css) return NULL; } -/* - * Associate a particular clock with a function (eg, "uart") and device. - * The drivers can then request the same 'function' with several different - * devices and not care about which clock name to use. - */ -void __init at91_clock_associate(const char *id, struct device *dev, const char *func) -{ - struct clk *clk = clk_get(NULL, id); - - if (!dev || !clk || !IS_ERR(clk_get(dev, func))) - return; - - clk->function = func; - clk->dev = dev; -} - -/* clocks cannot be de-registered no refcounting necessary */ -struct clk *clk_get(struct device *dev, const char *id) -{ - struct clk *clk; - - list_for_each_entry(clk, &clocks, node) { - if (strcmp(id, clk->name) == 0) - return clk; - if (clk->function && (dev == clk->dev) && strcmp(id, clk->function) == 0) - return clk; - } - - return ERR_PTR(-ENOENT); -} -EXPORT_SYMBOL(clk_get); - -void clk_put(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_put); - static void __clk_enable(struct clk *clk) { if (clk->parent) @@ -498,32 +461,38 @@ postcore_initcall(at91_clk_debugfs_init); /*------------------------------------------------------------------------*/ /* Register a new clock */ +static void __init at91_clk_add(struct clk *clk) +{ + list_add_tail(&clk->node, &clocks); + + clk->cl.con_id = clk->name; + clk->cl.clk = clk; + clkdev_add(&clk->cl); +} + int __init clk_register(struct clk *clk) { if (clk_is_peripheral(clk)) { if (!clk->parent) clk->parent = &mck; clk->mode = pmc_periph_mode; - list_add_tail(&clk->node, &clocks); } else if (clk_is_sys(clk)) { clk->parent = &mck; clk->mode = pmc_sys_mode; - - list_add_tail(&clk->node, &clocks); } #ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS else if (clk_is_programmable(clk)) { clk->mode = pmc_sys_mode; init_programmable_clock(clk); - list_add_tail(&clk->node, &clocks); } #endif + at91_clk_add(clk); + return 0; } - /*------------------------------------------------------------------------*/ static u32 __init at91_pll_rate(struct clk *pll, u32 freq, u32 reg) @@ -630,7 +599,7 @@ static void __init at91_pllb_usbfs_clock_init(unsigned long main_clock) at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP); } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263() || cpu_is_at91sam9g20() || - cpu_is_at91sam9g10() || cpu_is_at572d940hf()) { + cpu_is_at91sam9g10()) { uhpck.pmc_mask = AT91SAM926x_PMC_UHP; udpck.pmc_mask = AT91SAM926x_PMC_UDP; } else if (cpu_is_at91cap9()) { @@ -754,19 +723,19 @@ int __init at91_clock_init(unsigned long main_clock) /* Register the PMC's standard clocks */ for (i = 0; i < ARRAY_SIZE(standard_pmc_clocks); i++) - list_add_tail(&standard_pmc_clocks[i]->node, &clocks); + at91_clk_add(standard_pmc_clocks[i]); if (cpu_has_pllb()) - list_add_tail(&pllb.node, &clocks); + at91_clk_add(&pllb); if (cpu_has_uhp()) - list_add_tail(&uhpck.node, &clocks); + at91_clk_add(&uhpck); if (cpu_has_udpfs()) - list_add_tail(&udpck.node, &clocks); + at91_clk_add(&udpck); if (cpu_has_utmi()) - list_add_tail(&utmi_clk.node, &clocks); + at91_clk_add(&utmi_clk); /* MCK and CPU clock are "always on" */ clk_enable(&mck); diff --git a/arch/arm/mach-at91/clock.h b/arch/arm/mach-at91/clock.h index 6cf4b78e175..c2e63e47dcb 100644 --- a/arch/arm/mach-at91/clock.h +++ b/arch/arm/mach-at91/clock.h @@ -6,6 +6,8 @@ * published by the Free Software Foundation. */ +#include <linux/clkdev.h> + #define CLK_TYPE_PRIMARY 0x1 #define CLK_TYPE_PLL 0x2 #define CLK_TYPE_PROGRAMMABLE 0x4 @@ -16,8 +18,7 @@ struct clk { struct list_head node; const char *name; /* unique clock name */ - const char *function; /* function of the clock */ - struct device *dev; /* device associated with function */ + struct clk_lookup cl; unsigned long rate_hz; struct clk *parent; u32 pmc_mask; @@ -29,3 +30,18 @@ struct clk { extern int __init clk_register(struct clk *clk); +extern struct clk mck; +extern struct clk utmi_clk; + +#define CLKDEV_CON_ID(_id, _clk) \ + { \ + .con_id = _id, \ + .clk = _clk, \ + } + +#define CLKDEV_CON_DEV_ID(_con_id, _dev_id, _clk) \ + { \ + .con_id = _con_id, \ + .dev_id = _dev_id, \ + .clk = _clk, \ + } diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index 0c66deb2db3..8ff3418f343 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -8,8 +8,21 @@ * published by the Free Software Foundation. */ +#include <linux/clkdev.h> + + /* Map io */ +extern void __init at91rm9200_map_io(void); +extern void __init at91sam9260_map_io(void); +extern void __init at91sam9261_map_io(void); +extern void __init at91sam9263_map_io(void); +extern void __init at91sam9rl_map_io(void); +extern void __init at91sam9g45_map_io(void); +extern void __init at91x40_map_io(void); +extern void __init at91cap9_map_io(void); + /* Processors */ -extern void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks); +extern void __init at91rm9200_set_type(int type); +extern void __init at91rm9200_initialize(unsigned long main_clock); extern void __init at91sam9260_initialize(unsigned long main_clock); extern void __init at91sam9261_initialize(unsigned long main_clock); extern void __init at91sam9263_initialize(unsigned long main_clock); @@ -17,7 +30,6 @@ extern void __init at91sam9rl_initialize(unsigned long main_clock); extern void __init at91sam9g45_initialize(unsigned long main_clock); extern void __init at91x40_initialize(unsigned long main_clock); extern void __init at91cap9_initialize(unsigned long main_clock); -extern void __init at572d940hf_initialize(unsigned long main_clock); /* Interrupts */ extern void __init at91rm9200_init_interrupts(unsigned int priority[]); @@ -28,7 +40,6 @@ extern void __init at91sam9rl_init_interrupts(unsigned int priority[]); extern void __init at91sam9g45_init_interrupts(unsigned int priority[]); extern void __init at91x40_init_interrupts(unsigned int priority[]); extern void __init at91cap9_init_interrupts(unsigned int priority[]); -extern void __init at572d940hf_init_interrupts(unsigned int priority[]); extern void __init at91_aic_init(unsigned int priority[]); /* Timer */ @@ -39,8 +50,19 @@ extern struct sys_timer at91x40_timer; /* Clocks */ extern int __init at91_clock_init(unsigned long main_clock); +/* + * function to specify the clock of the default console. As we do not + * use the device/driver bus, the dev_name is not intialize. So we need + * to link the clock to a specific con_id only "usart" + */ +extern void __init at91rm9200_set_console_clock(int id); +extern void __init at91sam9260_set_console_clock(int id); +extern void __init at91sam9261_set_console_clock(int id); +extern void __init at91sam9263_set_console_clock(int id); +extern void __init at91sam9rl_set_console_clock(int id); +extern void __init at91sam9g45_set_console_clock(int id); +extern void __init at91cap9_set_console_clock(int id); struct device; -extern void __init at91_clock_associate(const char *id, struct device *dev, const char *func); /* Power Management */ extern void at91_irq_suspend(void); diff --git a/arch/arm/mach-at91/include/mach/at572d940hf.h b/arch/arm/mach-at91/include/mach/at572d940hf.h deleted file mode 100644 index be510cfc56b..00000000000 --- a/arch/arm/mach-at91/include/mach/at572d940hf.h +++ /dev/null @@ -1,123 +0,0 @@ -/* - * include/mach/at572d940hf.h - * - * Antonio R. Costa <costa.antonior@gmail.com> - * Copyright (C) 2008 Atmel - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#ifndef AT572D940HF_H -#define AT572D940HF_H - -/* - * Peripheral identifiers/interrupts. - */ -#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -#define AT91_ID_SYS 1 /* System Peripherals */ -#define AT572D940HF_ID_PIOA 2 /* Parallel IO Controller A */ -#define AT572D940HF_ID_PIOB 3 /* Parallel IO Controller B */ -#define AT572D940HF_ID_PIOC 4 /* Parallel IO Controller C */ -#define AT572D940HF_ID_EMAC 5 /* MACB ethernet controller */ -#define AT572D940HF_ID_US0 6 /* USART 0 */ -#define AT572D940HF_ID_US1 7 /* USART 1 */ -#define AT572D940HF_ID_US2 8 /* USART 2 */ -#define AT572D940HF_ID_MCI 9 /* Multimedia Card Interface */ -#define AT572D940HF_ID_UDP 10 /* USB Device Port */ -#define AT572D940HF_ID_TWI0 11 /* Two-Wire Interface 0 */ -#define AT572D940HF_ID_SPI0 12 /* Serial Peripheral Interface 0 */ -#define AT572D940HF_ID_SPI1 13 /* Serial Peripheral Interface 1 */ -#define AT572D940HF_ID_SSC0 14 /* Serial Synchronous Controller 0 */ -#define AT572D940HF_ID_SSC1 15 /* Serial Synchronous Controller 1 */ -#define AT572D940HF_ID_SSC2 16 /* Serial Synchronous Controller 2 */ -#define AT572D940HF_ID_TC0 17 /* Timer Counter 0 */ -#define AT572D940HF_ID_TC1 18 /* Timer Counter 1 */ -#define AT572D940HF_ID_TC2 19 /* Timer Counter 2 */ -#define AT572D940HF_ID_UHP 20 /* USB Host port */ -#define AT572D940HF_ID_SSC3 21 /* Serial Synchronous Controller 3 */ -#define AT572D940HF_ID_TWI1 22 /* Two-Wire Interface 1 */ -#define AT572D940HF_ID_CAN0 23 /* CAN Controller 0 */ -#define AT572D940HF_ID_CAN1 24 /* CAN Controller 1 */ -#define AT572D940HF_ID_MHALT 25 /* mAgicV HALT line */ -#define AT572D940HF_ID_MSIRQ0 26 /* mAgicV SIRQ0 line */ -#define AT572D940HF_ID_MEXC 27 /* mAgicV exception line */ -#define AT572D940HF_ID_MEDMA 28 /* mAgicV end of DMA line */ -#define AT572D940HF_ID_IRQ0 29 /* External Interrupt Source (IRQ0) */ -#define AT572D940HF_ID_IRQ1 30 /* External Interrupt Source (IRQ1) */ -#define AT572D940HF_ID_IRQ2 31 /* External Interrupt Source (IRQ2) */ - - -/* - * User Peripheral physical base addresses. - */ -#define AT572D940HF_BASE_TCB 0xfffa0000 -#define AT572D940HF_BASE_TC0 0xfffa0000 -#define AT572D940HF_BASE_TC1 0xfffa0040 -#define AT572D940HF_BASE_TC2 0xfffa0080 -#define AT572D940HF_BASE_UDP 0xfffa4000 -#define AT572D940HF_BASE_MCI 0xfffa8000 -#define AT572D940HF_BASE_TWI0 0xfffac000 -#define AT572D940HF_BASE_US0 0xfffb0000 -#define AT572D940HF_BASE_US1 0xfffb4000 -#define AT572D940HF_BASE_US2 0xfffb8000 -#define AT572D940HF_BASE_SSC0 0xfffbc000 -#define AT572D940HF_BASE_SSC1 0xfffc0000 -#define AT572D940HF_BASE_SSC2 0xfffc4000 -#define AT572D940HF_BASE_SPI0 0xfffc8000 -#define AT572D940HF_BASE_SPI1 0xfffcc000 -#define AT572D940HF_BASE_SSC3 0xfffd0000 -#define AT572D940HF_BASE_TWI1 0xfffd4000 -#define AT572D940HF_BASE_EMAC 0xfffd8000 -#define AT572D940HF_BASE_CAN0 0xfffdc000 -#define AT572D940HF_BASE_CAN1 0xfffe0000 -#define AT91_BASE_SYS 0xffffea00 - - -/* - * System Peripherals (offset from AT91_BASE_SYS) - */ -#define AT91_SDRAMC0 (0xffffea00 - AT91_BASE_SYS) -#define AT91_SMC (0xffffec00 - AT91_BASE_SYS) -#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS) -#define AT91_AIC (0xfffff000 - AT91_BASE_SYS) -#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS) -#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS) -#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS) -#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS) -#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) -#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) -#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS) -#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS) -#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS) - -#define AT91_USART0 AT572D940HF_ID_US0 -#define AT91_USART1 AT572D940HF_ID_US1 -#define AT91_USART2 AT572D940HF_ID_US2 - - -/* - * Internal Memory. - */ -#define AT572D940HF_SRAM_BASE 0x00300000 /* Internal SRAM base address */ -#define AT572D940HF_SRAM_SIZE (48 * SZ_1K) /* Internal SRAM size (48Kb) */ - -#define AT572D940HF_ROM_BASE 0x00400000 /* Internal ROM base address */ -#define AT572D940HF_ROM_SIZE SZ_32K /* Internal ROM size (32Kb) */ - -#define AT572D940HF_UHP_BASE 0x00500000 /* USB Host controller */ - - -#endif diff --git a/arch/arm/mach-at91/include/mach/at572d940hf_matrix.h b/arch/arm/mach-at91/include/mach/at572d940hf_matrix.h deleted file mode 100644 index b6751df0948..00000000000 --- a/arch/arm/mach-at91/include/mach/at572d940hf_matrix.h +++ /dev/null @@ -1,123 +0,0 @@ -/* - * include/mach//at572d940hf_matrix.h - * - * Antonio R. Costa <costa.antonior@gmail.com> - * Copyright (C) 2008 Atmel - * - * Copyright (C) 2005 SAN People - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef AT572D940HF_MATRIX_H -#define AT572D940HF_MATRIX_H - -#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */ -#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */ -#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */ -#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */ -#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */ -#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */ - -#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */ -#define AT91_MATRIX_ULBT_INFINITE (0 << 0) -#define AT91_MATRIX_ULBT_SINGLE (1 << 0) -#define AT91_MATRIX_ULBT_FOUR (2 << 0) -#define AT91_MATRIX_ULBT_EIGHT (3 << 0) -#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) - -#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */ -#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */ -#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */ -#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */ -#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */ -#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */ -#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ -#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) -#define AT91_MATRIX_FIXED_DEFMSTR (0x7 << 18) /* Fixed Index of Default Master */ -#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */ -#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24) -#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24) - -#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */ -#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */ -#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */ -#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */ -#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */ - -#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */ -#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */ -#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */ -#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */ -#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */ -#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */ -#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */ - -#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */ -#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ -#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ - -#define AT91_MATRIX_SFR0 (AT91_MATRIX + 0x110) /* Special Function Register 0 */ -#define AT91_MATRIX_SFR1 (AT91_MATRIX + 0x114) /* Special Function Register 1 */ -#define AT91_MATRIX_SFR2 (AT91_MATRIX + 0x118) /* Special Function Register 2 */ -#define AT91_MATRIX_SFR3 (AT91_MATRIX + 0x11C) /* Special Function Register 3 */ -#define AT91_MATRIX_SFR4 (AT91_MATRIX + 0x120) /* Special Function Register 4 */ -#define AT91_MATRIX_SFR5 (AT91_MATRIX + 0x124) /* Special Function Register 5 */ -#define AT91_MATRIX_SFR6 (AT91_MATRIX + 0x128) /* Special Function Register 6 */ -#define AT91_MATRIX_SFR7 (AT91_MATRIX + 0x12C) /* Special Function Register 7 */ -#define AT91_MATRIX_SFR8 (AT91_MATRIX + 0x130) /* Special Function Register 8 */ -#define AT91_MATRIX_SFR9 (AT91_MATRIX + 0x134) /* Special Function Register 9 */ -#define AT91_MATRIX_SFR10 (AT91_MATRIX + 0x138) /* Special Function Register 10 */ -#define AT91_MATRIX_SFR11 (AT91_MATRIX + 0x13C) /* Special Function Register 11 */ -#define AT91_MATRIX_SFR12 (AT91_MATRIX + 0x140) /* Special Function Register 12 */ -#define AT91_MATRIX_SFR13 (AT91_MATRIX + 0x144) /* Special Function Register 13 */ -#define AT91_MATRIX_SFR14 (AT91_MATRIX + 0x148) /* Special Function Register 14 */ -#define AT91_MATRIX_SFR15 (AT91_MATRIX + 0x14C) /* Special Function Register 15 */ - - -/* - * The following registers / bits are not defined in the Datasheet (Revision A) - */ - -#define AT91_MATRIX_TCR (AT91_MATRIX + 0x100) /* TCM Configuration Register */ -#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */ -#define AT91_MATRIX_ITCM_0 (0 << 0) -#define AT91_MATRIX_ITCM_16 (5 << 0) -#define AT91_MATRIX_ITCM_32 (6 << 0) -#define AT91_MATRIX_ITCM_64 (7 << 0) -#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */ -#define AT91_MATRIX_DTCM_0 (0 << 4) -#define AT91_MATRIX_DTCM_16 (5 << 4) -#define AT91_MATRIX_DTCM_32 (6 << 4) -#define AT91_MATRIX_DTCM_64 (7 << 4) - -#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x11C) /* EBI Chip Select Assignment Register */ -#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */ -#define AT91_MATRIX_CS1A_SMC (0 << 1) -#define AT91_MATRIX_CS1A_SDRAMC (1 << 1) -#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */ -#define AT91_MATRIX_CS3A_SMC (0 << 3) -#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3) -#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */ -#define AT91_MATRIX_CS4A_SMC (0 << 4) -#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4) -#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */ -#define AT91_MATRIX_CS5A_SMC (0 << 5) -#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5) -#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91cap9.h b/arch/arm/mach-at91/include/mach/at91cap9.h index 9c6af973748..665993849a7 100644 --- a/arch/arm/mach-at91/include/mach/at91cap9.h +++ b/arch/arm/mach-at91/include/mach/at91cap9.h @@ -20,8 +20,6 @@ /* * Peripheral identifiers/interrupts. */ -#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -#define AT91_ID_SYS 1 /* System Peripherals */ #define AT91CAP9_ID_PIOABCD 2 /* Parallel IO Controller A, B, C and D */ #define AT91CAP9_ID_MPB0 3 /* MP Block Peripheral 0 */ #define AT91CAP9_ID_MPB1 4 /* MP Block Peripheral 1 */ @@ -123,6 +121,4 @@ #define AT91CAP9_UDPHS_FIFO 0x00600000 /* USB High Speed Device Port */ #define AT91CAP9_UHP_BASE 0x00700000 /* USB Host controller */ -#define CONFIG_DRAM_BASE AT91_CHIPSELECT_6 - #endif diff --git a/arch/arm/mach-at91/include/mach/at91rm9200.h b/arch/arm/mach-at91/include/mach/at91rm9200.h index 78983155a07..99e0f8d02d7 100644 --- a/arch/arm/mach-at91/include/mach/at91rm9200.h +++ b/arch/arm/mach-at91/include/mach/at91rm9200.h @@ -19,8 +19,6 @@ /* * Peripheral identifiers/interrupts. */ -#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -#define AT91_ID_SYS 1 /* System Peripheral */ #define AT91RM9200_ID_PIOA 2 /* Parallel IO Controller A */ #define AT91RM9200_ID_PIOB 3 /* Parallel IO Controller B */ #define AT91RM9200_ID_PIOC 4 /* Parallel IO Controller C */ diff --git a/arch/arm/mach-at91/include/mach/at91sam9260.h b/arch/arm/mach-at91/include/mach/at91sam9260.h index 4e79036d3b8..8b6bf835cd7 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9260.h +++ b/arch/arm/mach-at91/include/mach/at91sam9260.h @@ -20,8 +20,6 @@ /* * Peripheral identifiers/interrupts. */ -#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -#define AT91_ID_SYS 1 /* System Peripherals */ #define AT91SAM9260_ID_PIOA 2 /* Parallel IO Controller A */ #define AT91SAM9260_ID_PIOB 3 /* Parallel IO Controller B */ #define AT91SAM9260_ID_PIOC 4 /* Parallel IO Controller C */ diff --git a/arch/arm/mach-at91/include/mach/at91sam9261.h b/arch/arm/mach-at91/include/mach/at91sam9261.h index 2b561851812..eafbddaf523 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9261.h +++ b/arch/arm/mach-at91/include/mach/at91sam9261.h @@ -18,8 +18,6 @@ /* * Peripheral identifiers/interrupts. */ -#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -#define AT91_ID_SYS 1 /* System Peripherals */ #define AT91SAM9261_ID_PIOA 2 /* Parallel IO Controller A */ #define AT91SAM9261_ID_PIOB 3 /* Parallel IO Controller B */ #define AT91SAM9261_ID_PIOC 4 /* Parallel IO Controller C */ diff --git a/arch/arm/mach-at91/include/mach/at91sam9263.h b/arch/arm/mach-at91/include/mach/at91sam9263.h index 2091f1e42d4..e2d348213a7 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9263.h +++ b/arch/arm/mach-at91/include/mach/at91sam9263.h @@ -18,8 +18,6 @@ /* * Peripheral identifiers/interrupts. */ -#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -#define AT91_ID_SYS 1 /* System Peripherals */ #define AT91SAM9263_ID_PIOA 2 /* Parallel IO Controller A */ #define AT91SAM9263_ID_PIOB 3 /* Parallel IO Controller B */ #define AT91SAM9263_ID_PIOCDE 4 /* Parallel IO Controller C, D and E */ diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h index a526869aee3..659304aa73d 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9g45.h +++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h @@ -18,8 +18,6 @@ /* * Peripheral identifiers/interrupts. */ -#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -#define AT91_ID_SYS 1 /* System Controller Interrupt */ #define AT91SAM9G45_ID_PIOA 2 /* Parallel I/O Controller A */ #define AT91SAM9G45_ID_PIOB 3 /* Parallel I/O Controller B */ #define AT91SAM9G45_ID_PIOC 4 /* Parallel I/O Controller C */ @@ -131,8 +129,6 @@ #define AT91SAM9G45_EHCI_BASE 0x00800000 /* USB Host controller (EHCI) */ #define AT91SAM9G45_VDEC_BASE 0x00900000 /* Video Decoder Controller */ -#define CONFIG_DRAM_BASE AT91_CHIPSELECT_6 - #define CONSISTENT_DMA_SIZE SZ_4M /* diff --git a/arch/arm/mach-at91/include/mach/at91sam9rl.h b/arch/arm/mach-at91/include/mach/at91sam9rl.h index 87ba8517ad9..41dbbe61055 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9rl.h +++ b/arch/arm/mach-at91/include/mach/at91sam9rl.h @@ -17,8 +17,6 @@ /* * Peripheral identifiers/interrupts. */ -#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -#define AT91_ID_SYS 1 /* System Controller */ #define AT91SAM9RL_ID_PIOA 2 /* Parallel IO Controller A */ #define AT91SAM9RL_ID_PIOB 3 /* Parallel IO Controller B */ #define AT91SAM9RL_ID_PIOC 4 /* Parallel IO Controller C */ diff --git a/arch/arm/mach-at91/include/mach/at91x40.h b/arch/arm/mach-at91/include/mach/at91x40.h index 063ac44a020..a152ff87e68 100644 --- a/arch/arm/mach-at91/include/mach/at91x40.h +++ b/arch/arm/mach-at91/include/mach/at91x40.h @@ -15,8 +15,6 @@ /* * IRQ list. */ -#define AT91_ID_FIQ 0 /* FIQ */ -#define AT91_ID_SYS 1 /* System Peripheral */ #define AT91X40_ID_USART0 2 /* USART port 0 */ #define AT91X40_ID_USART1 3 /* USART port 1 */ #define AT91X40_ID_TC0 4 /* Timer/Counter 0 */ diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h index 2b499eb343a..ed544a0d5a1 100644 --- a/arch/arm/mach-at91/include/mach/board.h +++ b/arch/arm/mach-at91/include/mach/board.h @@ -90,7 +90,7 @@ struct at91_eth_data { extern void __init at91_add_device_eth(struct at91_eth_data *data); #if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91SAM9G20) || defined(CONFIG_ARCH_AT91CAP9) \ - || defined(CONFIG_ARCH_AT91SAM9G45) || defined(CONFIG_ARCH_AT572D940HF) + || defined(CONFIG_ARCH_AT91SAM9G45) #define eth_platform_data at91_eth_data #endif @@ -140,6 +140,7 @@ extern void __init at91_set_serial_console(unsigned portnr); extern struct platform_device *atmel_default_console_device; struct atmel_uart_data { + int num; /* port num */ short use_dma_tx; /* use transmit DMA? */ short use_dma_rx; /* use receive DMA? */ void __iomem *regs; /* virt. base address, if any */ @@ -203,9 +204,6 @@ extern void __init at91_init_leds(u8 cpu_led, u8 timer_led); extern void __init at91_gpio_leds(struct gpio_led *leds, int nr); extern void __init at91_pwm_leds(struct gpio_led *leds, int nr); - /* AT572D940HF DSP */ -extern void __init at91_add_device_mAgic(void); - /* FIXME: this needs a better location, but gets stuff building again */ extern int at91_suspend_entering_slow_clock(void); diff --git a/arch/arm/mach-at91/include/mach/clkdev.h b/arch/arm/mach-at91/include/mach/clkdev.h new file mode 100644 index 00000000000..04b37a89801 --- /dev/null +++ b/arch/arm/mach-at91/include/mach/clkdev.h @@ -0,0 +1,7 @@ +#ifndef __ASM_MACH_CLKDEV_H +#define __ASM_MACH_CLKDEV_H + +#define __clk_get(clk) ({ 1; }) +#define __clk_put(clk) do { } while (0) + +#endif diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h index 0700f212530..df966c2bc2d 100644 --- a/arch/arm/mach-at91/include/mach/cpu.h +++ b/arch/arm/mach-at91/include/mach/cpu.h @@ -34,8 +34,6 @@ #define ARCH_ID_AT91SAM9XE256 0x329a93a0 #define ARCH_ID_AT91SAM9XE512 0x329aa3a0 -#define ARCH_ID_AT572D940HF 0x0e0303e0 - #define ARCH_ID_AT91M40800 0x14080044 #define ARCH_ID_AT91R40807 0x44080746 #define ARCH_ID_AT91M40807 0x14080745 @@ -90,9 +88,16 @@ static inline unsigned long at91cap9_rev_identify(void) #endif #ifdef CONFIG_ARCH_AT91RM9200 +extern int rm9200_type; +#define ARCH_REVISON_9200_BGA (0 << 0) +#define ARCH_REVISON_9200_PQFP (1 << 0) #define cpu_is_at91rm9200() (at91_cpu_identify() == ARCH_ID_AT91RM9200) +#define cpu_is_at91rm9200_bga() (!cpu_is_at91rm9200_pqfp()) +#define cpu_is_at91rm9200_pqfp() (cpu_is_at91rm9200() && rm9200_type & ARCH_REVISON_9200_PQFP) #else #define cpu_is_at91rm9200() (0) +#define cpu_is_at91rm9200_bga() (0) +#define cpu_is_at91rm9200_pqfp() (0) #endif #ifdef CONFIG_ARCH_AT91SAM9260 @@ -181,12 +186,6 @@ static inline unsigned long at91cap9_rev_identify(void) #define cpu_is_at91cap9_revC() (0) #endif -#ifdef CONFIG_ARCH_AT572D940HF -#define cpu_is_at572d940hf() (at91_cpu_identify() == ARCH_ID_AT572D940HF) -#else -#define cpu_is_at572d940hf() (0) -#endif - /* * Since this is ARM, we will never run on any AVR32 CPU. But these * definitions may reduce clutter in common drivers. diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h index 3d64a75e3ed..1008b9fb507 100644 --- a/arch/arm/mach-at91/include/mach/hardware.h +++ b/arch/arm/mach-at91/include/mach/hardware.h @@ -32,13 +32,17 @@ #include <mach/at91cap9.h> #elif defined(CONFIG_ARCH_AT91X40) #include <mach/at91x40.h> -#elif defined(CONFIG_ARCH_AT572D940HF) -#include <mach/at572d940hf.h> #else #error "Unsupported AT91 processor" #endif +/* + * Peripheral identifiers/interrupts. + */ +#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ +#define AT91_ID_SYS 1 /* System Peripherals */ + #ifdef CONFIG_MMU /* * Remap the peripherals from address 0xFFF78000 .. 0xFFFFFFFF @@ -82,13 +86,6 @@ #define AT91_CHIPSELECT_6 0x70000000 #define AT91_CHIPSELECT_7 0x80000000 -/* SDRAM */ -#ifdef CONFIG_DRAM_BASE -#define AT91_SDRAM_BASE CONFIG_DRAM_BASE -#else -#define AT91_SDRAM_BASE AT91_CHIPSELECT_1 -#endif - /* Clocks */ #define AT91_SLOW_CLOCK 32768 /* slow clock */ diff --git a/arch/arm/mach-at91/include/mach/memory.h b/arch/arm/mach-at91/include/mach/memory.h index c2cfe504064..401c207f2f3 100644 --- a/arch/arm/mach-at91/include/mach/memory.h +++ b/arch/arm/mach-at91/include/mach/memory.h @@ -23,6 +23,4 @@ #include <mach/hardware.h> -#define PLAT_PHYS_OFFSET (AT91_SDRAM_BASE) - #endif diff --git a/arch/arm/mach-at91/include/mach/stamp9g20.h b/arch/arm/mach-at91/include/mach/stamp9g20.h index 6120f9c46d5..f62c0abca4b 100644 --- a/arch/arm/mach-at91/include/mach/stamp9g20.h +++ b/arch/arm/mach-at91/include/mach/stamp9g20.h @@ -1,7 +1,7 @@ #ifndef __MACH_STAMP9G20_H #define __MACH_STAMP9G20_H -void stamp9g20_map_io(void); +void stamp9g20_init_early(void); void stamp9g20_board_init(void); #endif diff --git a/arch/arm/mach-at91/include/mach/system_rev.h b/arch/arm/mach-at91/include/mach/system_rev.h new file mode 100644 index 00000000000..b855ee75f72 --- /dev/null +++ b/arch/arm/mach-at91/include/mach/system_rev.h @@ -0,0 +1,25 @@ +/* + * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Under GPLv2 only + */ + +#ifndef __ARCH_SYSTEM_REV_H__ +#define __ARCH_SYSTEM_REV_H__ + +/* + * board revision encoding + * mach specific + * the 16-31 bit are reserved for at91 generic information + * + * bit 31: + * 0 => nand 16 bit + * 1 => nand 8 bit + */ +#define BOARD_HAVE_NAND_8BIT (1 << 31) +static int inline board_have_nand_8bit(void) +{ + return system_rev & BOARD_HAVE_NAND_8BIT; +} + +#endif /* __ARCH_SYSTEM_REV_H__ */ diff --git a/arch/arm/mach-at91/include/mach/timex.h b/arch/arm/mach-at91/include/mach/timex.h index 05a6e8af80c..31ac2d97f14 100644 --- a/arch/arm/mach-at91/include/mach/timex.h +++ b/arch/arm/mach-at91/include/mach/timex.h @@ -82,11 +82,6 @@ #define AT91X40_MASTER_CLOCK 40000000 #define CLOCK_TICK_RATE (AT91X40_MASTER_CLOCK) -#elif defined(CONFIG_ARCH_AT572D940HF) - -#define AT572D940HF_MASTER_CLOCK 80000000 -#define CLOCK_TICK_RATE (AT572D940HF_MASTER_CLOCK/16) - #endif #endif diff --git a/arch/arm/mach-tegra/include/mach/kbc.h b/arch/arm/mach-tegra/include/mach/kbc.h index 04c779832c7..4f3572a1c68 100644 --- a/arch/arm/mach-tegra/include/mach/kbc.h +++ b/arch/arm/mach-tegra/include/mach/kbc.h @@ -50,13 +50,11 @@ struct tegra_kbc_platform_data { unsigned int debounce_cnt; unsigned int repeat_cnt; - unsigned int wake_cnt; /* 0:wake on any key >1:wake on wake_cfg */ - const struct tegra_kbc_wake_key *wake_cfg; - struct tegra_kbc_pin_cfg pin_cfg[KBC_MAX_GPIO]; const struct matrix_keymap_data *keymap_data; bool wakeup; bool use_fn_map; + bool use_ghost_filter; }; #endif diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 6e1907fa94f..bb26f40493e 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -204,7 +204,7 @@ static struct i2c_board_info __initdata mop500_i2c2_devices[] = { }, }; -#define U8500_I2C_CONTROLLER(id, _slsu, _tft, _rft, clk, _sm) \ +#define U8500_I2C_CONTROLLER(id, _slsu, _tft, _rft, clk, t_out, _sm) \ static struct nmk_i2c_controller u8500_i2c##id##_data = { \ /* \ * slave data setup time, which is \ @@ -219,19 +219,21 @@ static struct nmk_i2c_controller u8500_i2c##id##_data = { \ .rft = _rft, \ /* std. mode operation */ \ .clk_freq = clk, \ + /* Slave response timeout(ms) */\ + .timeout = t_out, \ .sm = _sm, \ } /* * The board uses 4 i2c controllers, initialize all of * them with slave data setup time of 250 ns, - * Tx & Rx FIFO threshold values as 1 and standard + * Tx & Rx FIFO threshold values as 8 and standard * mode of operation */ -U8500_I2C_CONTROLLER(0, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD); -U8500_I2C_CONTROLLER(1, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD); -U8500_I2C_CONTROLLER(2, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD); -U8500_I2C_CONTROLLER(3, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD); +U8500_I2C_CONTROLLER(0, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST); +U8500_I2C_CONTROLLER(1, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST); +U8500_I2C_CONTROLLER(2, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST); +U8500_I2C_CONTROLLER(3, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST); static void __init mop500_i2c_init(void) { diff --git a/arch/arm/plat-nomadik/include/plat/i2c.h b/arch/arm/plat-nomadik/include/plat/i2c.h index 1621db67a53..8ba70ffc31e 100644 --- a/arch/arm/plat-nomadik/include/plat/i2c.h +++ b/arch/arm/plat-nomadik/include/plat/i2c.h @@ -11,8 +11,8 @@ enum i2c_freq_mode { I2C_FREQ_MODE_STANDARD, /* up to 100 Kb/s */ I2C_FREQ_MODE_FAST, /* up to 400 Kb/s */ + I2C_FREQ_MODE_HIGH_SPEED, /* up to 3.4 Mb/s */ I2C_FREQ_MODE_FAST_PLUS, /* up to 1 Mb/s */ - I2C_FREQ_MODE_HIGH_SPEED /* up to 3.4 Mb/s */ }; /** @@ -24,13 +24,15 @@ enum i2c_freq_mode { * to the values of 14, 6, 2 for a 48 MHz i2c clk * @tft: Tx FIFO Threshold in bytes * @rft: Rx FIFO Threshold in bytes + * @timeout Slave response timeout(ms) * @sm: speed mode */ struct nmk_i2c_controller { unsigned long clk_freq; unsigned short slsu; - unsigned char tft; - unsigned char rft; + unsigned char tft; + unsigned char rft; + int timeout; enum i2c_freq_mode sm; }; diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c index bfc9d071db9..aa677e2a382 100644 --- a/arch/avr32/mach-at32ap/at32ap700x.c +++ b/arch/avr32/mach-at32ap/at32ap700x.c @@ -1014,6 +1014,7 @@ static struct platform_device *__initdata at32_usarts[4]; void __init at32_map_usart(unsigned int hw_id, unsigned int line, int flags) { struct platform_device *pdev; + struct atmel_uart_data *pdata; switch (hw_id) { case 0: @@ -1042,7 +1043,8 @@ void __init at32_map_usart(unsigned int hw_id, unsigned int line, int flags) data->regs = (void __iomem *)pdev->resource[0].start; } - pdev->id = line; + pdata = pdev->dev.platform_data; + pdata->num = portnr; at32_usarts[line] = pdev; } diff --git a/arch/avr32/mach-at32ap/include/mach/board.h b/arch/avr32/mach-at32ap/include/mach/board.h index 61740201b31..679458d9a62 100644 --- a/arch/avr32/mach-at32ap/include/mach/board.h +++ b/arch/avr32/mach-at32ap/include/mach/board.h @@ -33,6 +33,7 @@ extern struct platform_device *atmel_default_console_device; #define ATMEL_USART_CLK 0x04 struct atmel_uart_data { + int num; /* port num */ short use_dma_tx; /* use transmit DMA? */ short use_dma_rx; /* use receive DMA? */ void __iomem *regs; /* virtual base address, if any */ diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S index 854fa49f1c3..8d85c8c6f85 100644 --- a/arch/blackfin/kernel/vmlinux.lds.S +++ b/arch/blackfin/kernel/vmlinux.lds.S @@ -136,7 +136,7 @@ SECTIONS . = ALIGN(16); INIT_DATA_SECTION(16) - PERCPU(32, PAGE_SIZE) + PERCPU_SECTION(32) .exit.data : { diff --git a/arch/cris/kernel/vmlinux.lds.S b/arch/cris/kernel/vmlinux.lds.S index 728bbd9e7d4..a6990cb0f09 100644 --- a/arch/cris/kernel/vmlinux.lds.S +++ b/arch/cris/kernel/vmlinux.lds.S @@ -102,7 +102,7 @@ SECTIONS #endif __vmlinux_end = .; /* Last address of the physical file. */ #ifdef CONFIG_ETRAX_ARCH_V32 - PERCPU(32, PAGE_SIZE) + PERCPU_SECTION(32) .init.ramfs : { INIT_RAM_FS diff --git a/arch/frv/kernel/vmlinux.lds.S b/arch/frv/kernel/vmlinux.lds.S index 0daae8af578..7e958d829ec 100644 --- a/arch/frv/kernel/vmlinux.lds.S +++ b/arch/frv/kernel/vmlinux.lds.S @@ -37,7 +37,7 @@ SECTIONS _einittext = .; INIT_DATA_SECTION(8) - PERCPU(L1_CACHE_BYTES, 4096) + PERCPU_SECTION(L1_CACHE_BYTES) . = ALIGN(PAGE_SIZE); __init_end = .; diff --git a/arch/m32r/kernel/vmlinux.lds.S b/arch/m32r/kernel/vmlinux.lds.S index cf95aec7746..018e4a711d7 100644 --- a/arch/m32r/kernel/vmlinux.lds.S +++ b/arch/m32r/kernel/vmlinux.lds.S @@ -54,7 +54,7 @@ SECTIONS __init_begin = .; INIT_TEXT_SECTION(PAGE_SIZE) INIT_DATA_SECTION(16) - PERCPU(32, PAGE_SIZE) + PERCPU_SECTION(32) . = ALIGN(PAGE_SIZE); __init_end = .; /* freed after init ends here */ diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index 75531da02a4..d66e34c718d 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -5,6 +5,7 @@ config M68K select HAVE_AOUT if MMU select GENERIC_ATOMIC64 if MMU select HAVE_GENERIC_HARDIRQS if !MMU + select GENERIC_IRQ_SHOW if !MMU config RWSEM_GENERIC_SPINLOCK bool diff --git a/arch/m68k/include/asm/bitops_no.h b/arch/m68k/include/asm/bitops_no.h index 7d3779fdc5b..6b0e2d349f0 100644 --- a/arch/m68k/include/asm/bitops_no.h +++ b/arch/m68k/include/asm/bitops_no.h @@ -246,23 +246,7 @@ static inline int __test_and_clear_bit_le(int nr, volatile void *addr) return retval; } -#define ext2_set_bit_atomic(lock, nr, addr) \ - ({ \ - int ret; \ - spin_lock(lock); \ - ret = __test_and_set_bit_le((nr), (addr)); \ - spin_unlock(lock); \ - ret; \ - }) - -#define ext2_clear_bit_atomic(lock, nr, addr) \ - ({ \ - int ret; \ - spin_lock(lock); \ - ret = __test_and_clear_bit_le((nr), (addr)); \ - spin_unlock(lock); \ - ret; \ - }) +#include <asm-generic/bitops/ext2-atomic.h> static inline int test_bit_le(int nr, const volatile void *addr) { diff --git a/arch/m68k/include/asm/io_no.h b/arch/m68k/include/asm/io_no.h index cf20f3097af..353bf754a97 100644 --- a/arch/m68k/include/asm/io_no.h +++ b/arch/m68k/include/asm/io_no.h @@ -144,8 +144,10 @@ static inline void io_insl(unsigned int addr, void *buf, int len) #define IOMAP_NOCACHE_NONSER 2 #define IOMAP_WRITETHROUGH 3 -extern void *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag); - +static inline void *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag) +{ + return (void *) physaddr; +} static inline void *ioremap(unsigned long physaddr, unsigned long size) { return __ioremap(physaddr, size, IOMAP_NOCACHE_SER); @@ -163,7 +165,7 @@ static inline void *ioremap_fullcache(unsigned long physaddr, unsigned long size return __ioremap(physaddr, size, IOMAP_FULL_CACHING); } -extern void iounmap(void *addr); +#define iounmap(addr) do { } while(0) /* * Convert a physical pointer to a virtual kernel pointer for /dev/mem diff --git a/arch/m68k/kernel/asm-offsets.c b/arch/m68k/kernel/asm-offsets.c index 59a69a5c62f..983fed9d469 100644 --- a/arch/m68k/kernel/asm-offsets.c +++ b/arch/m68k/kernel/asm-offsets.c @@ -1,5 +1,105 @@ -#ifdef CONFIG_MMU -#include "asm-offsets_mm.c" +/* + * This program is used to generate definitions needed by + * assembly language modules. + * + * We use the technique used in the OSF Mach kernel code: + * generate asm statements containing #defines, + * compile this file to assembler, and then extract the + * #defines from the assembly-language output. + */ + +#define ASM_OFFSETS_C + +#include <linux/stddef.h> +#include <linux/sched.h> +#include <linux/kernel_stat.h> +#include <linux/kbuild.h> +#include <asm/bootinfo.h> +#include <asm/irq.h> +#include <asm/amigahw.h> +#include <linux/font.h> + +int main(void) +{ + /* offsets into the task struct */ + DEFINE(TASK_THREAD, offsetof(struct task_struct, thread)); + DEFINE(TASK_MM, offsetof(struct task_struct, mm)); + DEFINE(TASK_INFO, offsetof(struct task_struct, thread.info)); + DEFINE(TASK_TINFO, offsetof(struct task_struct, thread.info)); + + /* offsets into the thread struct */ + DEFINE(THREAD_KSP, offsetof(struct thread_struct, ksp)); + DEFINE(THREAD_USP, offsetof(struct thread_struct, usp)); + DEFINE(THREAD_SR, offsetof(struct thread_struct, sr)); + DEFINE(THREAD_FS, offsetof(struct thread_struct, fs)); + DEFINE(THREAD_CRP, offsetof(struct thread_struct, crp)); + DEFINE(THREAD_ESP0, offsetof(struct thread_struct, esp0)); + DEFINE(THREAD_FPREG, offsetof(struct thread_struct, fp)); + DEFINE(THREAD_FPCNTL, offsetof(struct thread_struct, fpcntl)); + DEFINE(THREAD_FPSTATE, offsetof(struct thread_struct, fpstate)); + + /* offsets into the thread_info struct */ + DEFINE(TINFO_PREEMPT, offsetof(struct thread_info, preempt_count)); + DEFINE(TINFO_FLAGS, offsetof(struct thread_info, flags)); + + /* offsets into the pt_regs */ + DEFINE(PT_OFF_D0, offsetof(struct pt_regs, d0)); + DEFINE(PT_OFF_ORIG_D0, offsetof(struct pt_regs, orig_d0)); + DEFINE(PT_OFF_D1, offsetof(struct pt_regs, d1)); + DEFINE(PT_OFF_D2, offsetof(struct pt_regs, d2)); + DEFINE(PT_OFF_D3, offsetof(struct pt_regs, d3)); + DEFINE(PT_OFF_D4, offsetof(struct pt_regs, d4)); + DEFINE(PT_OFF_D5, offsetof(struct pt_regs, d5)); + DEFINE(PT_OFF_A0, offsetof(struct pt_regs, a0)); + DEFINE(PT_OFF_A1, offsetof(struct pt_regs, a1)); + DEFINE(PT_OFF_A2, offsetof(struct pt_regs, a2)); + DEFINE(PT_OFF_PC, offsetof(struct pt_regs, pc)); + DEFINE(PT_OFF_SR, offsetof(struct pt_regs, sr)); + + /* bitfields are a bit difficult */ +#ifdef CONFIG_COLDFIRE + DEFINE(PT_OFF_FORMATVEC, offsetof(struct pt_regs, sr) - 2); #else -#include "asm-offsets_no.c" + DEFINE(PT_OFF_FORMATVEC, offsetof(struct pt_regs, pc) + 4); +#endif + + /* offsets into the irq_cpustat_t struct */ + DEFINE(CPUSTAT_SOFTIRQ_PENDING, offsetof(irq_cpustat_t, __softirq_pending)); + + /* signal defines */ + DEFINE(LSIGSEGV, SIGSEGV); + DEFINE(LSEGV_MAPERR, SEGV_MAPERR); + DEFINE(LSIGTRAP, SIGTRAP); + DEFINE(LTRAP_TRACE, TRAP_TRACE); + +#ifdef CONFIG_MMU + /* offsets into the bi_record struct */ + DEFINE(BIR_TAG, offsetof(struct bi_record, tag)); + DEFINE(BIR_SIZE, offsetof(struct bi_record, size)); + DEFINE(BIR_DATA, offsetof(struct bi_record, data)); + + /* offsets into font_desc (drivers/video/console/font.h) */ + DEFINE(FONT_DESC_IDX, offsetof(struct font_desc, idx)); + DEFINE(FONT_DESC_NAME, offsetof(struct font_desc, name)); + DEFINE(FONT_DESC_WIDTH, offsetof(struct font_desc, width)); + DEFINE(FONT_DESC_HEIGHT, offsetof(struct font_desc, height)); + DEFINE(FONT_DESC_DATA, offsetof(struct font_desc, data)); + DEFINE(FONT_DESC_PREF, offsetof(struct font_desc, pref)); + + /* offsets into the custom struct */ + DEFINE(CUSTOMBASE, &amiga_custom); + DEFINE(C_INTENAR, offsetof(struct CUSTOM, intenar)); + DEFINE(C_INTREQR, offsetof(struct CUSTOM, intreqr)); + DEFINE(C_INTENA, offsetof(struct CUSTOM, intena)); + DEFINE(C_INTREQ, offsetof(struct CUSTOM, intreq)); + DEFINE(C_SERDATR, offsetof(struct CUSTOM, serdatr)); + DEFINE(C_SERDAT, offsetof(struct CUSTOM, serdat)); + DEFINE(C_SERPER, offsetof(struct CUSTOM, serper)); + DEFINE(CIAABASE, &ciaa); + DEFINE(CIABBASE, &ciab); + DEFINE(C_PRA, offsetof(struct CIA, pra)); + DEFINE(ZTWOBASE, zTwoBase); #endif + + return 0; +} diff --git a/arch/m68k/kernel/asm-offsets_mm.c b/arch/m68k/kernel/asm-offsets_mm.c deleted file mode 100644 index 78e59b82ebc..00000000000 --- a/arch/m68k/kernel/asm-offsets_mm.c +++ /dev/null @@ -1,100 +0,0 @@ -/* - * This program is used to generate definitions needed by - * assembly language modules. - * - * We use the technique used in the OSF Mach kernel code: - * generate asm statements containing #defines, - * compile this file to assembler, and then extract the - * #defines from the assembly-language output. - */ - -#define ASM_OFFSETS_C - -#include <linux/stddef.h> -#include <linux/sched.h> -#include <linux/kernel_stat.h> -#include <linux/kbuild.h> -#include <asm/bootinfo.h> -#include <asm/irq.h> -#include <asm/amigahw.h> -#include <linux/font.h> - -int main(void) -{ - /* offsets into the task struct */ - DEFINE(TASK_THREAD, offsetof(struct task_struct, thread)); - DEFINE(TASK_INFO, offsetof(struct task_struct, thread.info)); - DEFINE(TASK_MM, offsetof(struct task_struct, mm)); -#ifdef CONFIG_MMU - DEFINE(TASK_TINFO, offsetof(struct task_struct, thread.info)); -#endif - - /* offsets into the thread struct */ - DEFINE(THREAD_KSP, offsetof(struct thread_struct, ksp)); - DEFINE(THREAD_USP, offsetof(struct thread_struct, usp)); - DEFINE(THREAD_SR, offsetof(struct thread_struct, sr)); - DEFINE(THREAD_FS, offsetof(struct thread_struct, fs)); - DEFINE(THREAD_CRP, offsetof(struct thread_struct, crp)); - DEFINE(THREAD_ESP0, offsetof(struct thread_struct, esp0)); - DEFINE(THREAD_FPREG, offsetof(struct thread_struct, fp)); - DEFINE(THREAD_FPCNTL, offsetof(struct thread_struct, fpcntl)); - DEFINE(THREAD_FPSTATE, offsetof(struct thread_struct, fpstate)); - - /* offsets into the thread_info struct */ - DEFINE(TINFO_PREEMPT, offsetof(struct thread_info, preempt_count)); - DEFINE(TINFO_FLAGS, offsetof(struct thread_info, flags)); - - /* offsets into the pt_regs */ - DEFINE(PT_OFF_D0, offsetof(struct pt_regs, d0)); - DEFINE(PT_OFF_ORIG_D0, offsetof(struct pt_regs, orig_d0)); - DEFINE(PT_OFF_D1, offsetof(struct pt_regs, d1)); - DEFINE(PT_OFF_D2, offsetof(struct pt_regs, d2)); - DEFINE(PT_OFF_D3, offsetof(struct pt_regs, d3)); - DEFINE(PT_OFF_D4, offsetof(struct pt_regs, d4)); - DEFINE(PT_OFF_D5, offsetof(struct pt_regs, d5)); - DEFINE(PT_OFF_A0, offsetof(struct pt_regs, a0)); - DEFINE(PT_OFF_A1, offsetof(struct pt_regs, a1)); - DEFINE(PT_OFF_A2, offsetof(struct pt_regs, a2)); - DEFINE(PT_OFF_PC, offsetof(struct pt_regs, pc)); - DEFINE(PT_OFF_SR, offsetof(struct pt_regs, sr)); - /* bitfields are a bit difficult */ - DEFINE(PT_OFF_FORMATVEC, offsetof(struct pt_regs, pc) + 4); - - /* offsets into the irq_cpustat_t struct */ - DEFINE(CPUSTAT_SOFTIRQ_PENDING, offsetof(irq_cpustat_t, __softirq_pending)); - - /* offsets into the bi_record struct */ - DEFINE(BIR_TAG, offsetof(struct bi_record, tag)); - DEFINE(BIR_SIZE, offsetof(struct bi_record, size)); - DEFINE(BIR_DATA, offsetof(struct bi_record, data)); - - /* offsets into font_desc (drivers/video/console/font.h) */ - DEFINE(FONT_DESC_IDX, offsetof(struct font_desc, idx)); - DEFINE(FONT_DESC_NAME, offsetof(struct font_desc, name)); - DEFINE(FONT_DESC_WIDTH, offsetof(struct font_desc, width)); - DEFINE(FONT_DESC_HEIGHT, offsetof(struct font_desc, height)); - DEFINE(FONT_DESC_DATA, offsetof(struct font_desc, data)); - DEFINE(FONT_DESC_PREF, offsetof(struct font_desc, pref)); - - /* signal defines */ - DEFINE(LSIGSEGV, SIGSEGV); - DEFINE(LSEGV_MAPERR, SEGV_MAPERR); - DEFINE(LSIGTRAP, SIGTRAP); - DEFINE(LTRAP_TRACE, TRAP_TRACE); - - /* offsets into the custom struct */ - DEFINE(CUSTOMBASE, &amiga_custom); - DEFINE(C_INTENAR, offsetof(struct CUSTOM, intenar)); - DEFINE(C_INTREQR, offsetof(struct CUSTOM, intreqr)); - DEFINE(C_INTENA, offsetof(struct CUSTOM, intena)); - DEFINE(C_INTREQ, offsetof(struct CUSTOM, intreq)); - DEFINE(C_SERDATR, offsetof(struct CUSTOM, serdatr)); - DEFINE(C_SERDAT, offsetof(struct CUSTOM, serdat)); - DEFINE(C_SERPER, offsetof(struct CUSTOM, serper)); - DEFINE(CIAABASE, &ciaa); - DEFINE(CIABBASE, &ciab); - DEFINE(C_PRA, offsetof(struct CIA, pra)); - DEFINE(ZTWOBASE, zTwoBase); - - return 0; -} diff --git a/arch/m68k/kernel/asm-offsets_no.c b/arch/m68k/kernel/asm-offsets_no.c deleted file mode 100644 index ffe02f41ad4..00000000000 --- a/arch/m68k/kernel/asm-offsets_no.c +++ /dev/null @@ -1,76 +0,0 @@ -/* - * This program is used to generate definitions needed by - * assembly language modules. - * - * We use the technique used in the OSF Mach kernel code: - * generate asm statements containing #defines, - * compile this file to assembler, and then extract the - * #defines from the assembly-language output. - */ - -#include <linux/stddef.h> -#include <linux/sched.h> -#include <linux/kernel_stat.h> -#include <linux/ptrace.h> -#include <linux/hardirq.h> -#include <linux/kbuild.h> -#include <asm/bootinfo.h> -#include <asm/irq.h> -#include <asm/thread_info.h> - -int main(void) -{ - /* offsets into the task struct */ - DEFINE(TASK_THREAD, offsetof(struct task_struct, thread)); - DEFINE(TASK_MM, offsetof(struct task_struct, mm)); - - /* offsets into the irq_cpustat_t struct */ - DEFINE(CPUSTAT_SOFTIRQ_PENDING, offsetof(irq_cpustat_t, __softirq_pending)); - - /* offsets into the thread struct */ - DEFINE(THREAD_KSP, offsetof(struct thread_struct, ksp)); - DEFINE(THREAD_USP, offsetof(struct thread_struct, usp)); - DEFINE(THREAD_SR, offsetof(struct thread_struct, sr)); - DEFINE(THREAD_FS, offsetof(struct thread_struct, fs)); - DEFINE(THREAD_CRP, offsetof(struct thread_struct, crp)); - DEFINE(THREAD_ESP0, offsetof(struct thread_struct, esp0)); - DEFINE(THREAD_FPREG, offsetof(struct thread_struct, fp)); - DEFINE(THREAD_FPCNTL, offsetof(struct thread_struct, fpcntl)); - DEFINE(THREAD_FPSTATE, offsetof(struct thread_struct, fpstate)); - - /* offsets into the pt_regs */ - DEFINE(PT_OFF_D0, offsetof(struct pt_regs, d0)); - DEFINE(PT_OFF_ORIG_D0, offsetof(struct pt_regs, orig_d0)); - DEFINE(PT_OFF_D1, offsetof(struct pt_regs, d1)); - DEFINE(PT_OFF_D2, offsetof(struct pt_regs, d2)); - DEFINE(PT_OFF_D3, offsetof(struct pt_regs, d3)); - DEFINE(PT_OFF_D4, offsetof(struct pt_regs, d4)); - DEFINE(PT_OFF_D5, offsetof(struct pt_regs, d5)); - DEFINE(PT_OFF_A0, offsetof(struct pt_regs, a0)); - DEFINE(PT_OFF_A1, offsetof(struct pt_regs, a1)); - DEFINE(PT_OFF_A2, offsetof(struct pt_regs, a2)); - DEFINE(PT_OFF_PC, offsetof(struct pt_regs, pc)); - DEFINE(PT_OFF_SR, offsetof(struct pt_regs, sr)); - -#ifdef CONFIG_COLDFIRE - /* bitfields are a bit difficult */ - DEFINE(PT_OFF_FORMATVEC, offsetof(struct pt_regs, sr) - 2); -#else - /* bitfields are a bit difficult */ - DEFINE(PT_OFF_FORMATVEC, offsetof(struct pt_regs, pc) + 4); -#endif - - /* signal defines */ - DEFINE(SIGSEGV, SIGSEGV); - DEFINE(SEGV_MAPERR, SEGV_MAPERR); - DEFINE(SIGTRAP, SIGTRAP); - DEFINE(TRAP_TRACE, TRAP_TRACE); - - DEFINE(PT_PTRACED, PT_PTRACED); - - /* Offsets in thread_info structure */ - DEFINE(TI_FLAGS, offsetof(struct thread_info, flags)); - DEFINE(TI_PREEMPTCOUNT, offsetof(struct thread_info, preempt_count)); - - return 0; -} diff --git a/arch/m68k/kernel/entry_no.S b/arch/m68k/kernel/entry_no.S index 2783f25e38b..5f0f6b598b5 100644 --- a/arch/m68k/kernel/entry_no.S +++ b/arch/m68k/kernel/entry_no.S @@ -24,7 +24,6 @@ * linux 2.4 support David McCullough <davidm@snapgear.com> */ -#include <linux/sys.h> #include <linux/linkage.h> #include <asm/errno.h> #include <asm/setup.h> diff --git a/arch/m68k/kernel/irq.c b/arch/m68k/kernel/irq.c index 15dbc3e9d20..544b8717d49 100644 --- a/arch/m68k/kernel/irq.c +++ b/arch/m68k/kernel/irq.c @@ -28,31 +28,3 @@ asmlinkage void do_IRQ(int irq, struct pt_regs *regs) set_irq_regs(oldregs); } - -int show_interrupts(struct seq_file *p, void *v) -{ - struct irqaction *ap; - int irq = *((loff_t *) v); - - if (irq == 0) - seq_puts(p, " CPU0\n"); - - if (irq < NR_IRQS) { - struct irq_desc *desc = irq_to_desc(irq); - - ap = desc->action; - if (ap) { - seq_printf(p, "%3d: ", irq); - seq_printf(p, "%10u ", kstat_irqs(irq)); - seq_printf(p, "%14s ", irq_desc_get_chip(desc)->name); - - seq_printf(p, "%s", ap->name); - for (ap = ap->next; ap; ap = ap->next) - seq_printf(p, ", %s", ap->name); - seq_putc(p, '\n'); - } - } - - return 0; -} - diff --git a/arch/m68k/kernel/m68k_ksyms.c b/arch/m68k/kernel/m68k_ksyms.c index 4752c28ce0a..33f82769547 100644 --- a/arch/m68k/kernel/m68k_ksyms.c +++ b/arch/m68k/kernel/m68k_ksyms.c @@ -1,5 +1,33 @@ -#ifdef CONFIG_MMU -#include "m68k_ksyms_mm.c" -#else -#include "m68k_ksyms_no.c" +#include <linux/module.h> + +asmlinkage long long __ashldi3 (long long, int); +asmlinkage long long __ashrdi3 (long long, int); +asmlinkage long long __lshrdi3 (long long, int); +asmlinkage long long __muldi3 (long long, long long); + +/* The following are special because they're not called + explicitly (the C compiler generates them). Fortunately, + their interface isn't gonna change any time soon now, so + it's OK to leave it out of version control. */ +EXPORT_SYMBOL(__ashldi3); +EXPORT_SYMBOL(__ashrdi3); +EXPORT_SYMBOL(__lshrdi3); +EXPORT_SYMBOL(__muldi3); + +#if !defined(__mc68020__) && !defined(__mc68030__) && \ + !defined(__mc68040__) && !defined(__mc68060__) && !defined(__mcpu32__) +/* + * Simpler 68k and ColdFire parts also need a few other gcc functions. + */ +extern long long __divsi3(long long, long long); +extern long long __modsi3(long long, long long); +extern long long __mulsi3(long long, long long); +extern long long __udivsi3(long long, long long); +extern long long __umodsi3(long long, long long); + +EXPORT_SYMBOL(__divsi3); +EXPORT_SYMBOL(__modsi3); +EXPORT_SYMBOL(__mulsi3); +EXPORT_SYMBOL(__udivsi3); +EXPORT_SYMBOL(__umodsi3); #endif diff --git a/arch/m68k/kernel/m68k_ksyms_mm.c b/arch/m68k/kernel/m68k_ksyms_mm.c deleted file mode 100644 index d900e77e536..00000000000 --- a/arch/m68k/kernel/m68k_ksyms_mm.c +++ /dev/null @@ -1,16 +0,0 @@ -#include <linux/module.h> - -asmlinkage long long __ashldi3 (long long, int); -asmlinkage long long __ashrdi3 (long long, int); -asmlinkage long long __lshrdi3 (long long, int); -asmlinkage long long __muldi3 (long long, long long); - -/* The following are special because they're not called - explicitly (the C compiler generates them). Fortunately, - their interface isn't gonna change any time soon now, so - it's OK to leave it out of version control. */ -EXPORT_SYMBOL(__ashldi3); -EXPORT_SYMBOL(__ashrdi3); -EXPORT_SYMBOL(__lshrdi3); -EXPORT_SYMBOL(__muldi3); - diff --git a/arch/m68k/kernel/m68k_ksyms_no.c b/arch/m68k/kernel/m68k_ksyms_no.c deleted file mode 100644 index 39fe0a7aec3..00000000000 --- a/arch/m68k/kernel/m68k_ksyms_no.c +++ /dev/null @@ -1,78 +0,0 @@ -#include <linux/module.h> -#include <linux/linkage.h> -#include <linux/sched.h> -#include <linux/string.h> -#include <linux/mm.h> -#include <linux/user.h> -#include <linux/elfcore.h> -#include <linux/in6.h> -#include <linux/interrupt.h> - -#include <asm/setup.h> -#include <asm/machdep.h> -#include <asm/pgalloc.h> -#include <asm/irq.h> -#include <asm/io.h> -#include <asm/checksum.h> -#include <asm/current.h> - -extern int dump_fpu(struct pt_regs *, elf_fpregset_t *); - -/* platform dependent support */ - -EXPORT_SYMBOL(__ioremap); -EXPORT_SYMBOL(iounmap); -EXPORT_SYMBOL(dump_fpu); - -EXPORT_SYMBOL(ip_fast_csum); - -EXPORT_SYMBOL(kernel_thread); - -/* Networking helper routines. */ -EXPORT_SYMBOL(csum_partial_copy_nocheck); - -/* The following are special because they're not called - explicitly (the C compiler generates them). Fortunately, - their interface isn't gonna change any time soon now, so - it's OK to leave it out of version control. */ -EXPORT_SYMBOL(memcpy); -EXPORT_SYMBOL(memset); - -/* - * libgcc functions - functions that are used internally by the - * compiler... (prototypes are not correct though, but that - * doesn't really matter since they're not versioned). - */ -extern void __ashldi3(void); -extern void __ashrdi3(void); -extern void __divsi3(void); -extern void __lshrdi3(void); -extern void __modsi3(void); -extern void __muldi3(void); -extern void __mulsi3(void); -extern void __udivsi3(void); -extern void __umodsi3(void); - - /* gcc lib functions */ -EXPORT_SYMBOL(__ashldi3); -EXPORT_SYMBOL(__ashrdi3); -EXPORT_SYMBOL(__divsi3); -EXPORT_SYMBOL(__lshrdi3); -EXPORT_SYMBOL(__modsi3); -EXPORT_SYMBOL(__muldi3); -EXPORT_SYMBOL(__mulsi3); -EXPORT_SYMBOL(__udivsi3); -EXPORT_SYMBOL(__umodsi3); - -#ifdef CONFIG_COLDFIRE -extern unsigned int *dma_device_address; -extern unsigned long dma_base_addr, _ramend; -EXPORT_SYMBOL(dma_base_addr); -EXPORT_SYMBOL(dma_device_address); -EXPORT_SYMBOL(_ramend); - -extern asmlinkage void trap(void); -extern void *_ramvec; -EXPORT_SYMBOL(trap); -EXPORT_SYMBOL(_ramvec); -#endif /* CONFIG_COLDFIRE */ diff --git a/arch/m68k/kernel/process_no.c b/arch/m68k/kernel/process_no.c index e2a63af5d51..9b86ad11c68 100644 --- a/arch/m68k/kernel/process_no.c +++ b/arch/m68k/kernel/process_no.c @@ -151,6 +151,7 @@ int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags) set_fs(fs); return retval; } +EXPORT_SYMBOL(kernel_thread); void flush_thread(void) { @@ -283,6 +284,7 @@ int dump_fpu(struct pt_regs *regs, struct user_m68kfp_struct *fpu) #endif return 1; } +EXPORT_SYMBOL(dump_fpu); /* * Generic dumping code. Used for panic and debug. diff --git a/arch/m68k/kernel/sys_m68k.c b/arch/m68k/kernel/sys_m68k.c index 63013df3358..8623f8dc16f 100644 --- a/arch/m68k/kernel/sys_m68k.c +++ b/arch/m68k/kernel/sys_m68k.c @@ -1,5 +1,580 @@ +/* + * linux/arch/m68k/kernel/sys_m68k.c + * + * This file contains various random system calls that + * have a non-standard calling sequence on the Linux/m68k + * platform. + */ + +#include <linux/capability.h> +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/mm.h> +#include <linux/fs.h> +#include <linux/smp.h> +#include <linux/sem.h> +#include <linux/msg.h> +#include <linux/shm.h> +#include <linux/stat.h> +#include <linux/syscalls.h> +#include <linux/mman.h> +#include <linux/file.h> +#include <linux/ipc.h> + +#include <asm/setup.h> +#include <asm/uaccess.h> +#include <asm/cachectl.h> +#include <asm/traps.h> +#include <asm/page.h> +#include <asm/unistd.h> +#include <asm/cacheflush.h> + #ifdef CONFIG_MMU -#include "sys_m68k_mm.c" + +#include <asm/tlb.h> + +asmlinkage int do_page_fault(struct pt_regs *regs, unsigned long address, + unsigned long error_code); + +asmlinkage long sys_mmap2(unsigned long addr, unsigned long len, + unsigned long prot, unsigned long flags, + unsigned long fd, unsigned long pgoff) +{ + /* + * This is wrong for sun3 - there PAGE_SIZE is 8Kb, + * so we need to shift the argument down by 1; m68k mmap64(3) + * (in libc) expects the last argument of mmap2 in 4Kb units. + */ + return sys_mmap_pgoff(addr, len, prot, flags, fd, pgoff); +} + +/* Convert virtual (user) address VADDR to physical address PADDR */ +#define virt_to_phys_040(vaddr) \ +({ \ + unsigned long _mmusr, _paddr; \ + \ + __asm__ __volatile__ (".chip 68040\n\t" \ + "ptestr (%1)\n\t" \ + "movec %%mmusr,%0\n\t" \ + ".chip 68k" \ + : "=r" (_mmusr) \ + : "a" (vaddr)); \ + _paddr = (_mmusr & MMU_R_040) ? (_mmusr & PAGE_MASK) : 0; \ + _paddr; \ +}) + +static inline int +cache_flush_040 (unsigned long addr, int scope, int cache, unsigned long len) +{ + unsigned long paddr, i; + + switch (scope) + { + case FLUSH_SCOPE_ALL: + switch (cache) + { + case FLUSH_CACHE_DATA: + /* This nop is needed for some broken versions of the 68040. */ + __asm__ __volatile__ ("nop\n\t" + ".chip 68040\n\t" + "cpusha %dc\n\t" + ".chip 68k"); + break; + case FLUSH_CACHE_INSN: + __asm__ __volatile__ ("nop\n\t" + ".chip 68040\n\t" + "cpusha %ic\n\t" + ".chip 68k"); + break; + default: + case FLUSH_CACHE_BOTH: + __asm__ __volatile__ ("nop\n\t" + ".chip 68040\n\t" + "cpusha %bc\n\t" + ".chip 68k"); + break; + } + break; + + case FLUSH_SCOPE_LINE: + /* Find the physical address of the first mapped page in the + address range. */ + if ((paddr = virt_to_phys_040(addr))) { + paddr += addr & ~(PAGE_MASK | 15); + len = (len + (addr & 15) + 15) >> 4; + } else { + unsigned long tmp = PAGE_SIZE - (addr & ~PAGE_MASK); + + if (len <= tmp) + return 0; + addr += tmp; + len -= tmp; + tmp = PAGE_SIZE; + for (;;) + { + if ((paddr = virt_to_phys_040(addr))) + break; + if (len <= tmp) + return 0; + addr += tmp; + len -= tmp; + } + len = (len + 15) >> 4; + } + i = (PAGE_SIZE - (paddr & ~PAGE_MASK)) >> 4; + while (len--) + { + switch (cache) + { + case FLUSH_CACHE_DATA: + __asm__ __volatile__ ("nop\n\t" + ".chip 68040\n\t" + "cpushl %%dc,(%0)\n\t" + ".chip 68k" + : : "a" (paddr)); + break; + case FLUSH_CACHE_INSN: + __asm__ __volatile__ ("nop\n\t" + ".chip 68040\n\t" + "cpushl %%ic,(%0)\n\t" + ".chip 68k" + : : "a" (paddr)); + break; + default: + case FLUSH_CACHE_BOTH: + __asm__ __volatile__ ("nop\n\t" + ".chip 68040\n\t" + "cpushl %%bc,(%0)\n\t" + ".chip 68k" + : : "a" (paddr)); + break; + } + if (!--i && len) + { + /* + * No need to page align here since it is done by + * virt_to_phys_040(). + */ + addr += PAGE_SIZE; + i = PAGE_SIZE / 16; + /* Recompute physical address when crossing a page + boundary. */ + for (;;) + { + if ((paddr = virt_to_phys_040(addr))) + break; + if (len <= i) + return 0; + len -= i; + addr += PAGE_SIZE; + } + } + else + paddr += 16; + } + break; + + default: + case FLUSH_SCOPE_PAGE: + len += (addr & ~PAGE_MASK) + (PAGE_SIZE - 1); + for (len >>= PAGE_SHIFT; len--; addr += PAGE_SIZE) + { + if (!(paddr = virt_to_phys_040(addr))) + continue; + switch (cache) + { + case FLUSH_CACHE_DATA: + __asm__ __volatile__ ("nop\n\t" + ".chip 68040\n\t" + "cpushp %%dc,(%0)\n\t" + ".chip 68k" + : : "a" (paddr)); + break; + case FLUSH_CACHE_INSN: + __asm__ __volatile__ ("nop\n\t" + ".chip 68040\n\t" + "cpushp %%ic,(%0)\n\t" + ".chip 68k" + : : "a" (paddr)); + break; + default: + case FLUSH_CACHE_BOTH: + __asm__ __volatile__ ("nop\n\t" + ".chip 68040\n\t" + "cpushp %%bc,(%0)\n\t" + ".chip 68k" + : : "a" (paddr)); + break; + } + } + break; + } + return 0; +} + +#define virt_to_phys_060(vaddr) \ +({ \ + unsigned long paddr; \ + __asm__ __volatile__ (".chip 68060\n\t" \ + "plpar (%0)\n\t" \ + ".chip 68k" \ + : "=a" (paddr) \ + : "0" (vaddr)); \ + (paddr); /* XXX */ \ +}) + +static inline int +cache_flush_060 (unsigned long addr, int scope, int cache, unsigned long len) +{ + unsigned long paddr, i; + + /* + * 68060 manual says: + * cpush %dc : flush DC, remains valid (with our %cacr setup) + * cpush %ic : invalidate IC + * cpush %bc : flush DC + invalidate IC + */ + switch (scope) + { + case FLUSH_SCOPE_ALL: + switch (cache) + { + case FLUSH_CACHE_DATA: + __asm__ __volatile__ (".chip 68060\n\t" + "cpusha %dc\n\t" + ".chip 68k"); + break; + case FLUSH_CACHE_INSN: + __asm__ __volatile__ (".chip 68060\n\t" + "cpusha %ic\n\t" + ".chip 68k"); + break; + default: + case FLUSH_CACHE_BOTH: + __asm__ __volatile__ (".chip 68060\n\t" + "cpusha %bc\n\t" + ".chip 68k"); + break; + } + break; + + case FLUSH_SCOPE_LINE: + /* Find the physical address of the first mapped page in the + address range. */ + len += addr & 15; + addr &= -16; + if (!(paddr = virt_to_phys_060(addr))) { + unsigned long tmp = PAGE_SIZE - (addr & ~PAGE_MASK); + + if (len <= tmp) + return 0; + addr += tmp; + len -= tmp; + tmp = PAGE_SIZE; + for (;;) + { + if ((paddr = virt_to_phys_060(addr))) + break; + if (len <= tmp) + return 0; + addr += tmp; + len -= tmp; + } + } + len = (len + 15) >> 4; + i = (PAGE_SIZE - (paddr & ~PAGE_MASK)) >> 4; + while (len--) + { + switch (cache) + { + case FLUSH_CACHE_DATA: + __asm__ __volatile__ (".chip 68060\n\t" + "cpushl %%dc,(%0)\n\t" + ".chip 68k" + : : "a" (paddr)); + break; + case FLUSH_CACHE_INSN: + __asm__ __volatile__ (".chip 68060\n\t" + "cpushl %%ic,(%0)\n\t" + ".chip 68k" + : : "a" (paddr)); + break; + default: + case FLUSH_CACHE_BOTH: + __asm__ __volatile__ (".chip 68060\n\t" + "cpushl %%bc,(%0)\n\t" + ".chip 68k" + : : "a" (paddr)); + break; + } + if (!--i && len) + { + + /* + * We just want to jump to the first cache line + * in the next page. + */ + addr += PAGE_SIZE; + addr &= PAGE_MASK; + + i = PAGE_SIZE / 16; + /* Recompute physical address when crossing a page + boundary. */ + for (;;) + { + if ((paddr = virt_to_phys_060(addr))) + break; + if (len <= i) + return 0; + len -= i; + addr += PAGE_SIZE; + } + } + else + paddr += 16; + } + break; + + default: + case FLUSH_SCOPE_PAGE: + len += (addr & ~PAGE_MASK) + (PAGE_SIZE - 1); + addr &= PAGE_MASK; /* Workaround for bug in some + revisions of the 68060 */ + for (len >>= PAGE_SHIFT; len--; addr += PAGE_SIZE) + { + if (!(paddr = virt_to_phys_060(addr))) + continue; + switch (cache) + { + case FLUSH_CACHE_DATA: + __asm__ __volatile__ (".chip 68060\n\t" + "cpushp %%dc,(%0)\n\t" + ".chip 68k" + : : "a" (paddr)); + break; + case FLUSH_CACHE_INSN: + __asm__ __volatile__ (".chip 68060\n\t" + "cpushp %%ic,(%0)\n\t" + ".chip 68k" + : : "a" (paddr)); + break; + default: + case FLUSH_CACHE_BOTH: + __asm__ __volatile__ (".chip 68060\n\t" + "cpushp %%bc,(%0)\n\t" + ".chip 68k" + : : "a" (paddr)); + break; + } + } + break; + } + return 0; +} + +/* sys_cacheflush -- flush (part of) the processor cache. */ +asmlinkage int +sys_cacheflush (unsigned long addr, int scope, int cache, unsigned long len) +{ + struct vm_area_struct *vma; + int ret = -EINVAL; + + if (scope < FLUSH_SCOPE_LINE || scope > FLUSH_SCOPE_ALL || + cache & ~FLUSH_CACHE_BOTH) + goto out; + + if (scope == FLUSH_SCOPE_ALL) { + /* Only the superuser may explicitly flush the whole cache. */ + ret = -EPERM; + if (!capable(CAP_SYS_ADMIN)) + goto out; + } else { + /* + * Verify that the specified address region actually belongs + * to this process. + */ + vma = find_vma (current->mm, addr); + ret = -EINVAL; + /* Check for overflow. */ + if (addr + len < addr) + goto out; + if (vma == NULL || addr < vma->vm_start || addr + len > vma->vm_end) + goto out; + } + + if (CPU_IS_020_OR_030) { + if (scope == FLUSH_SCOPE_LINE && len < 256) { + unsigned long cacr; + __asm__ ("movec %%cacr, %0" : "=r" (cacr)); + if (cache & FLUSH_CACHE_INSN) + cacr |= 4; + if (cache & FLUSH_CACHE_DATA) + cacr |= 0x400; + len >>= 2; + while (len--) { + __asm__ __volatile__ ("movec %1, %%caar\n\t" + "movec %0, %%cacr" + : /* no outputs */ + : "r" (cacr), "r" (addr)); + addr += 4; + } + } else { + /* Flush the whole cache, even if page granularity requested. */ + unsigned long cacr; + __asm__ ("movec %%cacr, %0" : "=r" (cacr)); + if (cache & FLUSH_CACHE_INSN) + cacr |= 8; + if (cache & FLUSH_CACHE_DATA) + cacr |= 0x800; + __asm__ __volatile__ ("movec %0, %%cacr" : : "r" (cacr)); + } + ret = 0; + goto out; + } else { + /* + * 040 or 060: don't blindly trust 'scope', someone could + * try to flush a few megs of memory. + */ + + if (len>=3*PAGE_SIZE && scope<FLUSH_SCOPE_PAGE) + scope=FLUSH_SCOPE_PAGE; + if (len>=10*PAGE_SIZE && scope<FLUSH_SCOPE_ALL) + scope=FLUSH_SCOPE_ALL; + if (CPU_IS_040) { + ret = cache_flush_040 (addr, scope, cache, len); + } else if (CPU_IS_060) { + ret = cache_flush_060 (addr, scope, cache, len); + } + } +out: + return ret; +} + +/* This syscall gets its arguments in A0 (mem), D2 (oldval) and + D1 (newval). */ +asmlinkage int +sys_atomic_cmpxchg_32(unsigned long newval, int oldval, int d3, int d4, int d5, + unsigned long __user * mem) +{ + /* This was borrowed from ARM's implementation. */ + for (;;) { + struct mm_struct *mm = current->mm; + pgd_t *pgd; + pmd_t *pmd; + pte_t *pte; + spinlock_t *ptl; + unsigned long mem_value; + + down_read(&mm->mmap_sem); + pgd = pgd_offset(mm, (unsigned long)mem); + if (!pgd_present(*pgd)) + goto bad_access; + pmd = pmd_offset(pgd, (unsigned long)mem); + if (!pmd_present(*pmd)) + goto bad_access; + pte = pte_offset_map_lock(mm, pmd, (unsigned long)mem, &ptl); + if (!pte_present(*pte) || !pte_dirty(*pte) + || !pte_write(*pte)) { + pte_unmap_unlock(pte, ptl); + goto bad_access; + } + + mem_value = *mem; + if (mem_value == oldval) + *mem = newval; + + pte_unmap_unlock(pte, ptl); + up_read(&mm->mmap_sem); + return mem_value; + + bad_access: + up_read(&mm->mmap_sem); + /* This is not necessarily a bad access, we can get here if + a memory we're trying to write to should be copied-on-write. + Make the kernel do the necessary page stuff, then re-iterate. + Simulate a write access fault to do that. */ + { + /* The first argument of the function corresponds to + D1, which is the first field of struct pt_regs. */ + struct pt_regs *fp = (struct pt_regs *)&newval; + + /* '3' is an RMW flag. */ + if (do_page_fault(fp, (unsigned long)mem, 3)) + /* If the do_page_fault() failed, we don't + have anything meaningful to return. + There should be a SIGSEGV pending for + the process. */ + return 0xdeadbeef; + } + } +} + #else -#include "sys_m68k_no.c" -#endif + +/* sys_cacheflush -- flush (part of) the processor cache. */ +asmlinkage int +sys_cacheflush (unsigned long addr, int scope, int cache, unsigned long len) +{ + flush_cache_all(); + return 0; +} + +/* This syscall gets its arguments in A0 (mem), D2 (oldval) and + D1 (newval). */ +asmlinkage int +sys_atomic_cmpxchg_32(unsigned long newval, int oldval, int d3, int d4, int d5, + unsigned long __user * mem) +{ + struct mm_struct *mm = current->mm; + unsigned long mem_value; + + down_read(&mm->mmap_sem); + + mem_value = *mem; + if (mem_value == oldval) + *mem = newval; + + up_read(&mm->mmap_sem); + return mem_value; +} + +#endif /* CONFIG_MMU */ + +asmlinkage int sys_getpagesize(void) +{ + return PAGE_SIZE; +} + +/* + * Do a system call from kernel instead of calling sys_execve so we + * end up with proper pt_regs. + */ +int kernel_execve(const char *filename, + const char *const argv[], + const char *const envp[]) +{ + register long __res asm ("%d0") = __NR_execve; + register long __a asm ("%d1") = (long)(filename); + register long __b asm ("%d2") = (long)(argv); + register long __c asm ("%d3") = (long)(envp); + asm volatile ("trap #0" : "+d" (__res) + : "d" (__a), "d" (__b), "d" (__c)); + return __res; +} + +asmlinkage unsigned long sys_get_thread_area(void) +{ + return current_thread_info()->tp_value; +} + +asmlinkage int sys_set_thread_area(unsigned long tp) +{ + current_thread_info()->tp_value = tp; + return 0; +} + +asmlinkage int sys_atomic_barrier(void) +{ + /* no code needed for uniprocs */ + return 0; +} diff --git a/arch/m68k/kernel/sys_m68k_mm.c b/arch/m68k/kernel/sys_m68k_mm.c deleted file mode 100644 index 3db2e7f902a..00000000000 --- a/arch/m68k/kernel/sys_m68k_mm.c +++ /dev/null @@ -1,546 +0,0 @@ -/* - * linux/arch/m68k/kernel/sys_m68k.c - * - * This file contains various random system calls that - * have a non-standard calling sequence on the Linux/m68k - * platform. - */ - -#include <linux/capability.h> -#include <linux/errno.h> -#include <linux/sched.h> -#include <linux/mm.h> -#include <linux/fs.h> -#include <linux/smp.h> -#include <linux/sem.h> -#include <linux/msg.h> -#include <linux/shm.h> -#include <linux/stat.h> -#include <linux/syscalls.h> -#include <linux/mman.h> -#include <linux/file.h> -#include <linux/ipc.h> - -#include <asm/setup.h> -#include <asm/uaccess.h> -#include <asm/cachectl.h> -#include <asm/traps.h> -#include <asm/page.h> -#include <asm/unistd.h> -#include <linux/elf.h> -#include <asm/tlb.h> - -asmlinkage int do_page_fault(struct pt_regs *regs, unsigned long address, - unsigned long error_code); - -asmlinkage long sys_mmap2(unsigned long addr, unsigned long len, - unsigned long prot, unsigned long flags, - unsigned long fd, unsigned long pgoff) -{ - /* - * This is wrong for sun3 - there PAGE_SIZE is 8Kb, - * so we need to shift the argument down by 1; m68k mmap64(3) - * (in libc) expects the last argument of mmap2 in 4Kb units. - */ - return sys_mmap_pgoff(addr, len, prot, flags, fd, pgoff); -} - -/* Convert virtual (user) address VADDR to physical address PADDR */ -#define virt_to_phys_040(vaddr) \ -({ \ - unsigned long _mmusr, _paddr; \ - \ - __asm__ __volatile__ (".chip 68040\n\t" \ - "ptestr (%1)\n\t" \ - "movec %%mmusr,%0\n\t" \ - ".chip 68k" \ - : "=r" (_mmusr) \ - : "a" (vaddr)); \ - _paddr = (_mmusr & MMU_R_040) ? (_mmusr & PAGE_MASK) : 0; \ - _paddr; \ -}) - -static inline int -cache_flush_040 (unsigned long addr, int scope, int cache, unsigned long len) -{ - unsigned long paddr, i; - - switch (scope) - { - case FLUSH_SCOPE_ALL: - switch (cache) - { - case FLUSH_CACHE_DATA: - /* This nop is needed for some broken versions of the 68040. */ - __asm__ __volatile__ ("nop\n\t" - ".chip 68040\n\t" - "cpusha %dc\n\t" - ".chip 68k"); - break; - case FLUSH_CACHE_INSN: - __asm__ __volatile__ ("nop\n\t" - ".chip 68040\n\t" - "cpusha %ic\n\t" - ".chip 68k"); - break; - default: - case FLUSH_CACHE_BOTH: - __asm__ __volatile__ ("nop\n\t" - ".chip 68040\n\t" - "cpusha %bc\n\t" - ".chip 68k"); - break; - } - break; - - case FLUSH_SCOPE_LINE: - /* Find the physical address of the first mapped page in the - address range. */ - if ((paddr = virt_to_phys_040(addr))) { - paddr += addr & ~(PAGE_MASK | 15); - len = (len + (addr & 15) + 15) >> 4; - } else { - unsigned long tmp = PAGE_SIZE - (addr & ~PAGE_MASK); - - if (len <= tmp) - return 0; - addr += tmp; - len -= tmp; - tmp = PAGE_SIZE; - for (;;) - { - if ((paddr = virt_to_phys_040(addr))) - break; - if (len <= tmp) - return 0; - addr += tmp; - len -= tmp; - } - len = (len + 15) >> 4; - } - i = (PAGE_SIZE - (paddr & ~PAGE_MASK)) >> 4; - while (len--) - { - switch (cache) - { - case FLUSH_CACHE_DATA: - __asm__ __volatile__ ("nop\n\t" - ".chip 68040\n\t" - "cpushl %%dc,(%0)\n\t" - ".chip 68k" - : : "a" (paddr)); - break; - case FLUSH_CACHE_INSN: - __asm__ __volatile__ ("nop\n\t" - ".chip 68040\n\t" - "cpushl %%ic,(%0)\n\t" - ".chip 68k" - : : "a" (paddr)); - break; - default: - case FLUSH_CACHE_BOTH: - __asm__ __volatile__ ("nop\n\t" - ".chip 68040\n\t" - "cpushl %%bc,(%0)\n\t" - ".chip 68k" - : : "a" (paddr)); - break; - } - if (!--i && len) - { - /* - * No need to page align here since it is done by - * virt_to_phys_040(). - */ - addr += PAGE_SIZE; - i = PAGE_SIZE / 16; - /* Recompute physical address when crossing a page - boundary. */ - for (;;) - { - if ((paddr = virt_to_phys_040(addr))) - break; - if (len <= i) - return 0; - len -= i; - addr += PAGE_SIZE; - } - } - else - paddr += 16; - } - break; - - default: - case FLUSH_SCOPE_PAGE: - len += (addr & ~PAGE_MASK) + (PAGE_SIZE - 1); - for (len >>= PAGE_SHIFT; len--; addr += PAGE_SIZE) - { - if (!(paddr = virt_to_phys_040(addr))) - continue; - switch (cache) - { - case FLUSH_CACHE_DATA: - __asm__ __volatile__ ("nop\n\t" - ".chip 68040\n\t" - "cpushp %%dc,(%0)\n\t" - ".chip 68k" - : : "a" (paddr)); - break; - case FLUSH_CACHE_INSN: - __asm__ __volatile__ ("nop\n\t" - ".chip 68040\n\t" - "cpushp %%ic,(%0)\n\t" - ".chip 68k" - : : "a" (paddr)); - break; - default: - case FLUSH_CACHE_BOTH: - __asm__ __volatile__ ("nop\n\t" - ".chip 68040\n\t" - "cpushp %%bc,(%0)\n\t" - ".chip 68k" - : : "a" (paddr)); - break; - } - } - break; - } - return 0; -} - -#define virt_to_phys_060(vaddr) \ -({ \ - unsigned long paddr; \ - __asm__ __volatile__ (".chip 68060\n\t" \ - "plpar (%0)\n\t" \ - ".chip 68k" \ - : "=a" (paddr) \ - : "0" (vaddr)); \ - (paddr); /* XXX */ \ -}) - -static inline int -cache_flush_060 (unsigned long addr, int scope, int cache, unsigned long len) -{ - unsigned long paddr, i; - - /* - * 68060 manual says: - * cpush %dc : flush DC, remains valid (with our %cacr setup) - * cpush %ic : invalidate IC - * cpush %bc : flush DC + invalidate IC - */ - switch (scope) - { - case FLUSH_SCOPE_ALL: - switch (cache) - { - case FLUSH_CACHE_DATA: - __asm__ __volatile__ (".chip 68060\n\t" - "cpusha %dc\n\t" - ".chip 68k"); - break; - case FLUSH_CACHE_INSN: - __asm__ __volatile__ (".chip 68060\n\t" - "cpusha %ic\n\t" - ".chip 68k"); - break; - default: - case FLUSH_CACHE_BOTH: - __asm__ __volatile__ (".chip 68060\n\t" - "cpusha %bc\n\t" - ".chip 68k"); - break; - } - break; - - case FLUSH_SCOPE_LINE: - /* Find the physical address of the first mapped page in the - address range. */ - len += addr & 15; - addr &= -16; - if (!(paddr = virt_to_phys_060(addr))) { - unsigned long tmp = PAGE_SIZE - (addr & ~PAGE_MASK); - - if (len <= tmp) - return 0; - addr += tmp; - len -= tmp; - tmp = PAGE_SIZE; - for (;;) - { - if ((paddr = virt_to_phys_060(addr))) - break; - if (len <= tmp) - return 0; - addr += tmp; - len -= tmp; - } - } - len = (len + 15) >> 4; - i = (PAGE_SIZE - (paddr & ~PAGE_MASK)) >> 4; - while (len--) - { - switch (cache) - { - case FLUSH_CACHE_DATA: - __asm__ __volatile__ (".chip 68060\n\t" - "cpushl %%dc,(%0)\n\t" - ".chip 68k" - : : "a" (paddr)); - break; - case FLUSH_CACHE_INSN: - __asm__ __volatile__ (".chip 68060\n\t" - "cpushl %%ic,(%0)\n\t" - ".chip 68k" - : : "a" (paddr)); - break; - default: - case FLUSH_CACHE_BOTH: - __asm__ __volatile__ (".chip 68060\n\t" - "cpushl %%bc,(%0)\n\t" - ".chip 68k" - : : "a" (paddr)); - break; - } - if (!--i && len) - { - - /* - * We just want to jump to the first cache line - * in the next page. - */ - addr += PAGE_SIZE; - addr &= PAGE_MASK; - - i = PAGE_SIZE / 16; - /* Recompute physical address when crossing a page - boundary. */ - for (;;) - { - if ((paddr = virt_to_phys_060(addr))) - break; - if (len <= i) - return 0; - len -= i; - addr += PAGE_SIZE; - } - } - else - paddr += 16; - } - break; - - default: - case FLUSH_SCOPE_PAGE: - len += (addr & ~PAGE_MASK) + (PAGE_SIZE - 1); - addr &= PAGE_MASK; /* Workaround for bug in some - revisions of the 68060 */ - for (len >>= PAGE_SHIFT; len--; addr += PAGE_SIZE) - { - if (!(paddr = virt_to_phys_060(addr))) - continue; - switch (cache) - { - case FLUSH_CACHE_DATA: - __asm__ __volatile__ (".chip 68060\n\t" - "cpushp %%dc,(%0)\n\t" - ".chip 68k" - : : "a" (paddr)); - break; - case FLUSH_CACHE_INSN: - __asm__ __volatile__ (".chip 68060\n\t" - "cpushp %%ic,(%0)\n\t" - ".chip 68k" - : : "a" (paddr)); - break; - default: - case FLUSH_CACHE_BOTH: - __asm__ __volatile__ (".chip 68060\n\t" - "cpushp %%bc,(%0)\n\t" - ".chip 68k" - : : "a" (paddr)); - break; - } - } - break; - } - return 0; -} - -/* sys_cacheflush -- flush (part of) the processor cache. */ -asmlinkage int -sys_cacheflush (unsigned long addr, int scope, int cache, unsigned long len) -{ - struct vm_area_struct *vma; - int ret = -EINVAL; - - if (scope < FLUSH_SCOPE_LINE || scope > FLUSH_SCOPE_ALL || - cache & ~FLUSH_CACHE_BOTH) - goto out; - - if (scope == FLUSH_SCOPE_ALL) { - /* Only the superuser may explicitly flush the whole cache. */ - ret = -EPERM; - if (!capable(CAP_SYS_ADMIN)) - goto out; - } else { - /* - * Verify that the specified address region actually belongs - * to this process. - */ - vma = find_vma (current->mm, addr); - ret = -EINVAL; - /* Check for overflow. */ - if (addr + len < addr) - goto out; - if (vma == NULL || addr < vma->vm_start || addr + len > vma->vm_end) - goto out; - } - - if (CPU_IS_020_OR_030) { - if (scope == FLUSH_SCOPE_LINE && len < 256) { - unsigned long cacr; - __asm__ ("movec %%cacr, %0" : "=r" (cacr)); - if (cache & FLUSH_CACHE_INSN) - cacr |= 4; - if (cache & FLUSH_CACHE_DATA) - cacr |= 0x400; - len >>= 2; - while (len--) { - __asm__ __volatile__ ("movec %1, %%caar\n\t" - "movec %0, %%cacr" - : /* no outputs */ - : "r" (cacr), "r" (addr)); - addr += 4; - } - } else { - /* Flush the whole cache, even if page granularity requested. */ - unsigned long cacr; - __asm__ ("movec %%cacr, %0" : "=r" (cacr)); - if (cache & FLUSH_CACHE_INSN) - cacr |= 8; - if (cache & FLUSH_CACHE_DATA) - cacr |= 0x800; - __asm__ __volatile__ ("movec %0, %%cacr" : : "r" (cacr)); - } - ret = 0; - goto out; - } else { - /* - * 040 or 060: don't blindly trust 'scope', someone could - * try to flush a few megs of memory. - */ - - if (len>=3*PAGE_SIZE && scope<FLUSH_SCOPE_PAGE) - scope=FLUSH_SCOPE_PAGE; - if (len>=10*PAGE_SIZE && scope<FLUSH_SCOPE_ALL) - scope=FLUSH_SCOPE_ALL; - if (CPU_IS_040) { - ret = cache_flush_040 (addr, scope, cache, len); - } else if (CPU_IS_060) { - ret = cache_flush_060 (addr, scope, cache, len); - } - } -out: - return ret; -} - -asmlinkage int sys_getpagesize(void) -{ - return PAGE_SIZE; -} - -/* - * Do a system call from kernel instead of calling sys_execve so we - * end up with proper pt_regs. - */ -int kernel_execve(const char *filename, - const char *const argv[], - const char *const envp[]) -{ - register long __res asm ("%d0") = __NR_execve; - register long __a asm ("%d1") = (long)(filename); - register long __b asm ("%d2") = (long)(argv); - register long __c asm ("%d3") = (long)(envp); - asm volatile ("trap #0" : "+d" (__res) - : "d" (__a), "d" (__b), "d" (__c)); - return __res; -} - -asmlinkage unsigned long sys_get_thread_area(void) -{ - return current_thread_info()->tp_value; -} - -asmlinkage int sys_set_thread_area(unsigned long tp) -{ - current_thread_info()->tp_value = tp; - return 0; -} - -/* This syscall gets its arguments in A0 (mem), D2 (oldval) and - D1 (newval). */ -asmlinkage int -sys_atomic_cmpxchg_32(unsigned long newval, int oldval, int d3, int d4, int d5, - unsigned long __user * mem) -{ - /* This was borrowed from ARM's implementation. */ - for (;;) { - struct mm_struct *mm = current->mm; - pgd_t *pgd; - pmd_t *pmd; - pte_t *pte; - spinlock_t *ptl; - unsigned long mem_value; - - down_read(&mm->mmap_sem); - pgd = pgd_offset(mm, (unsigned long)mem); - if (!pgd_present(*pgd)) - goto bad_access; - pmd = pmd_offset(pgd, (unsigned long)mem); - if (!pmd_present(*pmd)) - goto bad_access; - pte = pte_offset_map_lock(mm, pmd, (unsigned long)mem, &ptl); - if (!pte_present(*pte) || !pte_dirty(*pte) - || !pte_write(*pte)) { - pte_unmap_unlock(pte, ptl); - goto bad_access; - } - - mem_value = *mem; - if (mem_value == oldval) - *mem = newval; - - pte_unmap_unlock(pte, ptl); - up_read(&mm->mmap_sem); - return mem_value; - - bad_access: - up_read(&mm->mmap_sem); - /* This is not necessarily a bad access, we can get here if - a memory we're trying to write to should be copied-on-write. - Make the kernel do the necessary page stuff, then re-iterate. - Simulate a write access fault to do that. */ - { - /* The first argument of the function corresponds to - D1, which is the first field of struct pt_regs. */ - struct pt_regs *fp = (struct pt_regs *)&newval; - - /* '3' is an RMW flag. */ - if (do_page_fault(fp, (unsigned long)mem, 3)) - /* If the do_page_fault() failed, we don't - have anything meaningful to return. - There should be a SIGSEGV pending for - the process. */ - return 0xdeadbeef; - } - } -} - -asmlinkage int sys_atomic_barrier(void) -{ - /* no code needed for uniprocs */ - return 0; -} diff --git a/arch/m68k/kernel/sys_m68k_no.c b/arch/m68k/kernel/sys_m68k_no.c deleted file mode 100644 index 68488ae47f0..00000000000 --- a/arch/m68k/kernel/sys_m68k_no.c +++ /dev/null @@ -1,94 +0,0 @@ -/* - * linux/arch/m68knommu/kernel/sys_m68k.c - * - * This file contains various random system calls that - * have a non-standard calling sequence on the Linux/m68k - * platform. - */ - -#include <linux/errno.h> -#include <linux/sched.h> -#include <linux/mm.h> -#include <linux/smp.h> -#include <linux/sem.h> -#include <linux/msg.h> -#include <linux/shm.h> -#include <linux/stat.h> -#include <linux/syscalls.h> -#include <linux/mman.h> -#include <linux/file.h> -#include <linux/ipc.h> -#include <linux/fs.h> - -#include <asm/setup.h> -#include <asm/uaccess.h> -#include <asm/cachectl.h> -#include <asm/traps.h> -#include <asm/cacheflush.h> -#include <asm/unistd.h> - -/* sys_cacheflush -- flush (part of) the processor cache. */ -asmlinkage int -sys_cacheflush (unsigned long addr, int scope, int cache, unsigned long len) -{ - flush_cache_all(); - return(0); -} - -asmlinkage int sys_getpagesize(void) -{ - return PAGE_SIZE; -} - -/* - * Do a system call from kernel instead of calling sys_execve so we - * end up with proper pt_regs. - */ -int kernel_execve(const char *filename, - const char *const argv[], - const char *const envp[]) -{ - register long __res asm ("%d0") = __NR_execve; - register long __a asm ("%d1") = (long)(filename); - register long __b asm ("%d2") = (long)(argv); - register long __c asm ("%d3") = (long)(envp); - asm volatile ("trap #0" : "+d" (__res) - : "d" (__a), "d" (__b), "d" (__c)); - return __res; -} - -asmlinkage unsigned long sys_get_thread_area(void) -{ - return current_thread_info()->tp_value; -} - -asmlinkage int sys_set_thread_area(unsigned long tp) -{ - current_thread_info()->tp_value = tp; - return 0; -} - -/* This syscall gets its arguments in A0 (mem), D2 (oldval) and - D1 (newval). */ -asmlinkage int -sys_atomic_cmpxchg_32(unsigned long newval, int oldval, int d3, int d4, int d5, - unsigned long __user * mem) -{ - struct mm_struct *mm = current->mm; - unsigned long mem_value; - - down_read(&mm->mmap_sem); - - mem_value = *mem; - if (mem_value == oldval) - *mem = newval; - - up_read(&mm->mmap_sem); - return mem_value; -} - -asmlinkage int sys_atomic_barrier(void) -{ - /* no code needed for uniprocs */ - return 0; -} diff --git a/arch/m68k/kernel/syscalltable.S b/arch/m68k/kernel/syscalltable.S index 5909e392cb1..6f7b09122a0 100644 --- a/arch/m68k/kernel/syscalltable.S +++ b/arch/m68k/kernel/syscalltable.S @@ -11,7 +11,6 @@ * Linux/m68k support by Hamish Macdonald */ -#include <linux/sys.h> #include <linux/linkage.h> #ifndef CONFIG_MMU diff --git a/arch/m68k/lib/Makefile b/arch/m68k/lib/Makefile index 1f95881d843..df421e50143 100644 --- a/arch/m68k/lib/Makefile +++ b/arch/m68k/lib/Makefile @@ -1,5 +1,14 @@ + +# +# Makefile for m68k-specific library files.. +# + +lib-y := ashldi3.o ashrdi3.o lshrdi3.o muldi3.o \ + memcpy.o memset.o memmove.o + ifdef CONFIG_MMU -include arch/m68k/lib/Makefile_mm +lib-y += string.o uaccess.o checksum_mm.o else -include arch/m68k/lib/Makefile_no +lib-y += mulsi3.o divsi3.o udivsi3.o modsi3.o umodsi3.o delay.o checksum_no.o endif + diff --git a/arch/m68k/lib/Makefile_mm b/arch/m68k/lib/Makefile_mm deleted file mode 100644 index af9abf8d9d9..00000000000 --- a/arch/m68k/lib/Makefile_mm +++ /dev/null @@ -1,6 +0,0 @@ -# -# Makefile for m68k-specific library files.. -# - -lib-y := ashldi3.o ashrdi3.o lshrdi3.o muldi3.o \ - checksum.o string.o uaccess.o diff --git a/arch/m68k/lib/Makefile_no b/arch/m68k/lib/Makefile_no deleted file mode 100644 index 32d852e586d..00000000000 --- a/arch/m68k/lib/Makefile_no +++ /dev/null @@ -1,7 +0,0 @@ -# -# Makefile for m68knommu specific library files.. -# - -lib-y := ashldi3.o ashrdi3.o lshrdi3.o \ - muldi3.o mulsi3.o divsi3.o udivsi3.o modsi3.o umodsi3.o \ - checksum.o memcpy.o memmove.o memset.o delay.o diff --git a/arch/m68k/lib/checksum.c b/arch/m68k/lib/checksum.c deleted file mode 100644 index 1297536060d..00000000000 --- a/arch/m68k/lib/checksum.c +++ /dev/null @@ -1,5 +0,0 @@ -#ifdef CONFIG_MMU -#include "checksum_mm.c" -#else -#include "checksum_no.c" -#endif diff --git a/arch/m68k/lib/checksum_no.c b/arch/m68k/lib/checksum_no.c index eccf25d3d73..e4c6354da76 100644 --- a/arch/m68k/lib/checksum_no.c +++ b/arch/m68k/lib/checksum_no.c @@ -101,6 +101,7 @@ __sum16 ip_fast_csum(const void *iph, unsigned int ihl) { return (__force __sum16)~do_csum(iph,ihl*4); } +EXPORT_SYMBOL(ip_fast_csum); #endif /* @@ -140,6 +141,7 @@ csum_partial_copy_from_user(const void __user *src, void *dst, memcpy(dst, (__force const void *)src, len); return csum_partial(dst, len, sum); } +EXPORT_SYMBOL(csum_partial_copy_from_user); /* * copy from ds while checksumming, otherwise like csum_partial @@ -151,3 +153,4 @@ csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum) memcpy(dst, src, len); return csum_partial(dst, len, sum); } +EXPORT_SYMBOL(csum_partial_copy_nocheck); diff --git a/arch/m68k/lib/memcpy.c b/arch/m68k/lib/memcpy.c index b50dbcad474..62182c81e91 100644 --- a/arch/m68k/lib/memcpy.c +++ b/arch/m68k/lib/memcpy.c @@ -1,62 +1,80 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + */ -#include <linux/types.h> +#include <linux/module.h> +#include <linux/string.h> -void * memcpy(void * to, const void * from, size_t n) +void *memcpy(void *to, const void *from, size_t n) { -#ifdef CONFIG_COLDFIRE - void *xto = to; - size_t temp; + void *xto = to; + size_t temp, temp1; - if (!n) - return xto; - if ((long) to & 1) - { - char *cto = to; - const char *cfrom = from; - *cto++ = *cfrom++; - to = cto; - from = cfrom; - n--; - } - if (n > 2 && (long) to & 2) - { - short *sto = to; - const short *sfrom = from; - *sto++ = *sfrom++; - to = sto; - from = sfrom; - n -= 2; - } - temp = n >> 2; - if (temp) - { - long *lto = to; - const long *lfrom = from; - for (; temp; temp--) - *lto++ = *lfrom++; - to = lto; - from = lfrom; - } - if (n & 2) - { - short *sto = to; - const short *sfrom = from; - *sto++ = *sfrom++; - to = sto; - from = sfrom; - } - if (n & 1) - { - char *cto = to; - const char *cfrom = from; - *cto = *cfrom; - } - return xto; + if (!n) + return xto; + if ((long)to & 1) { + char *cto = to; + const char *cfrom = from; + *cto++ = *cfrom++; + to = cto; + from = cfrom; + n--; + } + if (n > 2 && (long)to & 2) { + short *sto = to; + const short *sfrom = from; + *sto++ = *sfrom++; + to = sto; + from = sfrom; + n -= 2; + } + temp = n >> 2; + if (temp) { + long *lto = to; + const long *lfrom = from; +#if defined(__mc68020__) || defined(__mc68030__) || \ + defined(__mc68040__) || defined(__mc68060__) || defined(__mcpu32__) + asm volatile ( + " movel %2,%3\n" + " andw #7,%3\n" + " lsrl #3,%2\n" + " negw %3\n" + " jmp %%pc@(1f,%3:w:2)\n" + "4: movel %0@+,%1@+\n" + " movel %0@+,%1@+\n" + " movel %0@+,%1@+\n" + " movel %0@+,%1@+\n" + " movel %0@+,%1@+\n" + " movel %0@+,%1@+\n" + " movel %0@+,%1@+\n" + " movel %0@+,%1@+\n" + "1: dbra %2,4b\n" + " clrw %2\n" + " subql #1,%2\n" + " jpl 4b" + : "=a" (lfrom), "=a" (lto), "=d" (temp), "=&d" (temp1) + : "0" (lfrom), "1" (lto), "2" (temp)); #else - const char *c_from = from; - char *c_to = to; - while (n-- > 0) - *c_to++ = *c_from++; - return((void *) to); + for (; temp; temp--) + *lto++ = *lfrom++; #endif + to = lto; + from = lfrom; + } + if (n & 2) { + short *sto = to; + const short *sfrom = from; + *sto++ = *sfrom++; + to = sto; + from = sfrom; + } + if (n & 1) { + char *cto = to; + const char *cfrom = from; + *cto = *cfrom; + } + return xto; } +EXPORT_SYMBOL(memcpy); diff --git a/arch/m68k/lib/memmove.c b/arch/m68k/lib/memmove.c index b3dcfe9dab7..6519f7f349f 100644 --- a/arch/m68k/lib/memmove.c +++ b/arch/m68k/lib/memmove.c @@ -4,8 +4,6 @@ * for more details. */ -#define __IN_STRING_C - #include <linux/module.h> #include <linux/string.h> diff --git a/arch/m68k/lib/memset.c b/arch/m68k/lib/memset.c index 1389bf45563..f649e6a2e64 100644 --- a/arch/m68k/lib/memset.c +++ b/arch/m68k/lib/memset.c @@ -1,47 +1,75 @@ -#include <linux/types.h> +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + */ -void * memset(void * s, int c, size_t count) +#include <linux/module.h> +#include <linux/string.h> + +void *memset(void *s, int c, size_t count) { - void *xs = s; - size_t temp; + void *xs = s; + size_t temp; - if (!count) - return xs; - c &= 0xff; - c |= c << 8; - c |= c << 16; - if ((long) s & 1) - { - char *cs = s; - *cs++ = c; - s = cs; - count--; - } - if (count > 2 && (long) s & 2) - { - short *ss = s; - *ss++ = c; - s = ss; - count -= 2; - } - temp = count >> 2; - if (temp) - { - long *ls = s; - for (; temp; temp--) - *ls++ = c; - s = ls; - } - if (count & 2) - { - short *ss = s; - *ss++ = c; - s = ss; - } - if (count & 1) - { - char *cs = s; - *cs = c; - } - return xs; + if (!count) + return xs; + c &= 0xff; + c |= c << 8; + c |= c << 16; + if ((long)s & 1) { + char *cs = s; + *cs++ = c; + s = cs; + count--; + } + if (count > 2 && (long)s & 2) { + short *ss = s; + *ss++ = c; + s = ss; + count -= 2; + } + temp = count >> 2; + if (temp) { + long *ls = s; +#if defined(__mc68020__) || defined(__mc68030__) || \ + defined(__mc68040__) || defined(__mc68060__) || defined(__mcpu32__) + size_t temp1; + asm volatile ( + " movel %1,%2\n" + " andw #7,%2\n" + " lsrl #3,%1\n" + " negw %2\n" + " jmp %%pc@(2f,%2:w:2)\n" + "1: movel %3,%0@+\n" + " movel %3,%0@+\n" + " movel %3,%0@+\n" + " movel %3,%0@+\n" + " movel %3,%0@+\n" + " movel %3,%0@+\n" + " movel %3,%0@+\n" + " movel %3,%0@+\n" + "2: dbra %1,1b\n" + " clrw %1\n" + " subql #1,%1\n" + " jpl 1b" + : "=a" (ls), "=d" (temp), "=&d" (temp1) + : "d" (c), "0" (ls), "1" (temp)); +#else + for (; temp; temp--) + *ls++ = c; +#endif + s = ls; + } + if (count & 2) { + short *ss = s; + *ss++ = c; + s = ss; + } + if (count & 1) { + char *cs = s; + *cs = c; + } + return xs; } +EXPORT_SYMBOL(memset); diff --git a/arch/m68k/lib/muldi3.c b/arch/m68k/lib/muldi3.c index 16e0eb338ee..079bafca073 100644 --- a/arch/m68k/lib/muldi3.c +++ b/arch/m68k/lib/muldi3.c @@ -1,5 +1,98 @@ -#ifdef CONFIG_MMU -#include "muldi3_mm.c" +/* muldi3.c extracted from gcc-2.7.2.3/libgcc2.c and + gcc-2.7.2.3/longlong.h which is: */ +/* Copyright (C) 1989, 1992, 1993, 1994, 1995 Free Software Foundation, Inc. + +This file is part of GNU CC. + +GNU CC is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2, or (at your option) +any later version. + +GNU CC is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with GNU CC; see the file COPYING. If not, write to +the Free Software Foundation, 59 Temple Place - Suite 330, +Boston, MA 02111-1307, USA. */ + +#if defined(__mc68020__) || defined(__mc68030__) || \ + defined(__mc68040__) || defined(__mc68060__) || defined(__mcpu32__) + +#define umul_ppmm(w1, w0, u, v) \ + __asm__ ("mulu%.l %3,%1:%0" \ + : "=d" ((USItype)(w0)), \ + "=d" ((USItype)(w1)) \ + : "%0" ((USItype)(u)), \ + "dmi" ((USItype)(v))) + #else -#include "muldi3_no.c" + +#define SI_TYPE_SIZE 32 +#define __BITS4 (SI_TYPE_SIZE / 4) +#define __ll_B (1L << (SI_TYPE_SIZE / 2)) +#define __ll_lowpart(t) ((USItype) (t) % __ll_B) +#define __ll_highpart(t) ((USItype) (t) / __ll_B) + +#define umul_ppmm(w1, w0, u, v) \ + do { \ + USItype __x0, __x1, __x2, __x3; \ + USItype __ul, __vl, __uh, __vh; \ + \ + __ul = __ll_lowpart (u); \ + __uh = __ll_highpart (u); \ + __vl = __ll_lowpart (v); \ + __vh = __ll_highpart (v); \ + \ + __x0 = (USItype) __ul * __vl; \ + __x1 = (USItype) __ul * __vh; \ + __x2 = (USItype) __uh * __vl; \ + __x3 = (USItype) __uh * __vh; \ + \ + __x1 += __ll_highpart (__x0);/* this can't give carry */ \ + __x1 += __x2; /* but this indeed can */ \ + if (__x1 < __x2) /* did we get it? */ \ + __x3 += __ll_B; /* yes, add it in the proper pos. */ \ + \ + (w1) = __x3 + __ll_highpart (__x1); \ + (w0) = __ll_lowpart (__x1) * __ll_B + __ll_lowpart (__x0); \ + } while (0) + #endif + +#define __umulsidi3(u, v) \ + ({DIunion __w; \ + umul_ppmm (__w.s.high, __w.s.low, u, v); \ + __w.ll; }) + +typedef int SItype __attribute__ ((mode (SI))); +typedef unsigned int USItype __attribute__ ((mode (SI))); +typedef int DItype __attribute__ ((mode (DI))); +typedef int word_type __attribute__ ((mode (__word__))); + +struct DIstruct {SItype high, low;}; + +typedef union +{ + struct DIstruct s; + DItype ll; +} DIunion; + +DItype +__muldi3 (DItype u, DItype v) +{ + DIunion w; + DIunion uu, vv; + + uu.ll = u, + vv.ll = v; + + w.ll = __umulsidi3 (uu.s.low, vv.s.low); + w.s.high += ((USItype) uu.s.low * (USItype) vv.s.high + + (USItype) uu.s.high * (USItype) vv.s.low); + + return w.ll; +} diff --git a/arch/m68k/lib/muldi3_mm.c b/arch/m68k/lib/muldi3_mm.c deleted file mode 100644 index be4f275649e..00000000000 --- a/arch/m68k/lib/muldi3_mm.c +++ /dev/null @@ -1,63 +0,0 @@ -/* muldi3.c extracted from gcc-2.7.2.3/libgcc2.c and - gcc-2.7.2.3/longlong.h which is: */ -/* Copyright (C) 1989, 1992, 1993, 1994, 1995 Free Software Foundation, Inc. - -This file is part of GNU CC. - -GNU CC is free software; you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation; either version 2, or (at your option) -any later version. - -GNU CC is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with GNU CC; see the file COPYING. If not, write to -the Free Software Foundation, 59 Temple Place - Suite 330, -Boston, MA 02111-1307, USA. */ - -#define BITS_PER_UNIT 8 - -#define umul_ppmm(w1, w0, u, v) \ - __asm__ ("mulu%.l %3,%1:%0" \ - : "=d" ((USItype)(w0)), \ - "=d" ((USItype)(w1)) \ - : "%0" ((USItype)(u)), \ - "dmi" ((USItype)(v))) - -#define __umulsidi3(u, v) \ - ({DIunion __w; \ - umul_ppmm (__w.s.high, __w.s.low, u, v); \ - __w.ll; }) - -typedef int SItype __attribute__ ((mode (SI))); -typedef unsigned int USItype __attribute__ ((mode (SI))); -typedef int DItype __attribute__ ((mode (DI))); -typedef int word_type __attribute__ ((mode (__word__))); - -struct DIstruct {SItype high, low;}; - -typedef union -{ - struct DIstruct s; - DItype ll; -} DIunion; - -DItype -__muldi3 (DItype u, DItype v) -{ - DIunion w; - DIunion uu, vv; - - uu.ll = u, - vv.ll = v; - - w.ll = __umulsidi3 (uu.s.low, vv.s.low); - w.s.high += ((USItype) uu.s.low * (USItype) vv.s.high - + (USItype) uu.s.high * (USItype) vv.s.low); - - return w.ll; -} diff --git a/arch/m68k/lib/muldi3_no.c b/arch/m68k/lib/muldi3_no.c deleted file mode 100644 index 34af72c3030..00000000000 --- a/arch/m68k/lib/muldi3_no.c +++ /dev/null @@ -1,86 +0,0 @@ -/* muldi3.c extracted from gcc-2.7.2.3/libgcc2.c and - gcc-2.7.2.3/longlong.h which is: */ -/* Copyright (C) 1989, 1992, 1993, 1994, 1995 Free Software Foundation, Inc. - -This file is part of GNU CC. - -GNU CC is free software; you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation; either version 2, or (at your option) -any later version. - -GNU CC is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with GNU CC; see the file COPYING. If not, write to -the Free Software Foundation, 59 Temple Place - Suite 330, -Boston, MA 02111-1307, USA. */ - -#define BITS_PER_UNIT 8 -#define SI_TYPE_SIZE 32 - -#define __BITS4 (SI_TYPE_SIZE / 4) -#define __ll_B (1L << (SI_TYPE_SIZE / 2)) -#define __ll_lowpart(t) ((USItype) (t) % __ll_B) -#define __ll_highpart(t) ((USItype) (t) / __ll_B) - -#define umul_ppmm(w1, w0, u, v) \ - do { \ - USItype __x0, __x1, __x2, __x3; \ - USItype __ul, __vl, __uh, __vh; \ - \ - __ul = __ll_lowpart (u); \ - __uh = __ll_highpart (u); \ - __vl = __ll_lowpart (v); \ - __vh = __ll_highpart (v); \ - \ - __x0 = (USItype) __ul * __vl; \ - __x1 = (USItype) __ul * __vh; \ - __x2 = (USItype) __uh * __vl; \ - __x3 = (USItype) __uh * __vh; \ - \ - __x1 += __ll_highpart (__x0);/* this can't give carry */ \ - __x1 += __x2; /* but this indeed can */ \ - if (__x1 < __x2) /* did we get it? */ \ - __x3 += __ll_B; /* yes, add it in the proper pos. */ \ - \ - (w1) = __x3 + __ll_highpart (__x1); \ - (w0) = __ll_lowpart (__x1) * __ll_B + __ll_lowpart (__x0); \ - } while (0) - -#define __umulsidi3(u, v) \ - ({DIunion __w; \ - umul_ppmm (__w.s.high, __w.s.low, u, v); \ - __w.ll; }) - -typedef int SItype __attribute__ ((mode (SI))); -typedef unsigned int USItype __attribute__ ((mode (SI))); -typedef int DItype __attribute__ ((mode (DI))); -typedef int word_type __attribute__ ((mode (__word__))); - -struct DIstruct {SItype high, low;}; - -typedef union -{ - struct DIstruct s; - DItype ll; -} DIunion; - -DItype -__muldi3 (DItype u, DItype v) -{ - DIunion w; - DIunion uu, vv; - - uu.ll = u, - vv.ll = v; - - w.ll = __umulsidi3 (uu.s.low, vv.s.low); - w.s.high += ((USItype) uu.s.low * (USItype) vv.s.high - + (USItype) uu.s.high * (USItype) vv.s.low); - - return w.ll; -} diff --git a/arch/m68k/lib/string.c b/arch/m68k/lib/string.c index d399c5f2563..b9a57abfad0 100644 --- a/arch/m68k/lib/string.c +++ b/arch/m68k/lib/string.c @@ -20,226 +20,3 @@ char *strcat(char *dest, const char *src) return __kernel_strcpy(dest + __kernel_strlen(dest), src); } EXPORT_SYMBOL(strcat); - -void *memset(void *s, int c, size_t count) -{ - void *xs = s; - size_t temp, temp1; - - if (!count) - return xs; - c &= 0xff; - c |= c << 8; - c |= c << 16; - if ((long)s & 1) { - char *cs = s; - *cs++ = c; - s = cs; - count--; - } - if (count > 2 && (long)s & 2) { - short *ss = s; - *ss++ = c; - s = ss; - count -= 2; - } - temp = count >> 2; - if (temp) { - long *ls = s; - - asm volatile ( - " movel %1,%2\n" - " andw #7,%2\n" - " lsrl #3,%1\n" - " negw %2\n" - " jmp %%pc@(2f,%2:w:2)\n" - "1: movel %3,%0@+\n" - " movel %3,%0@+\n" - " movel %3,%0@+\n" - " movel %3,%0@+\n" - " movel %3,%0@+\n" - " movel %3,%0@+\n" - " movel %3,%0@+\n" - " movel %3,%0@+\n" - "2: dbra %1,1b\n" - " clrw %1\n" - " subql #1,%1\n" - " jpl 1b" - : "=a" (ls), "=d" (temp), "=&d" (temp1) - : "d" (c), "0" (ls), "1" (temp)); - s = ls; - } - if (count & 2) { - short *ss = s; - *ss++ = c; - s = ss; - } - if (count & 1) { - char *cs = s; - *cs = c; - } - return xs; -} -EXPORT_SYMBOL(memset); - -void *memcpy(void *to, const void *from, size_t n) -{ - void *xto = to; - size_t temp, temp1; - - if (!n) - return xto; - if ((long)to & 1) { - char *cto = to; - const char *cfrom = from; - *cto++ = *cfrom++; - to = cto; - from = cfrom; - n--; - } - if (n > 2 && (long)to & 2) { - short *sto = to; - const short *sfrom = from; - *sto++ = *sfrom++; - to = sto; - from = sfrom; - n -= 2; - } - temp = n >> 2; - if (temp) { - long *lto = to; - const long *lfrom = from; - - asm volatile ( - " movel %2,%3\n" - " andw #7,%3\n" - " lsrl #3,%2\n" - " negw %3\n" - " jmp %%pc@(1f,%3:w:2)\n" - "4: movel %0@+,%1@+\n" - " movel %0@+,%1@+\n" - " movel %0@+,%1@+\n" - " movel %0@+,%1@+\n" - " movel %0@+,%1@+\n" - " movel %0@+,%1@+\n" - " movel %0@+,%1@+\n" - " movel %0@+,%1@+\n" - "1: dbra %2,4b\n" - " clrw %2\n" - " subql #1,%2\n" - " jpl 4b" - : "=a" (lfrom), "=a" (lto), "=d" (temp), "=&d" (temp1) - : "0" (lfrom), "1" (lto), "2" (temp)); - to = lto; - from = lfrom; - } - if (n & 2) { - short *sto = to; - const short *sfrom = from; - *sto++ = *sfrom++; - to = sto; - from = sfrom; - } - if (n & 1) { - char *cto = to; - const char *cfrom = from; - *cto = *cfrom; - } - return xto; -} -EXPORT_SYMBOL(memcpy); - -void *memmove(void *dest, const void *src, size_t n) -{ - void *xdest = dest; - size_t temp; - - if (!n) - return xdest; - - if (dest < src) { - if ((long)dest & 1) { - char *cdest = dest; - const char *csrc = src; - *cdest++ = *csrc++; - dest = cdest; - src = csrc; - n--; - } - if (n > 2 && (long)dest & 2) { - short *sdest = dest; - const short *ssrc = src; - *sdest++ = *ssrc++; - dest = sdest; - src = ssrc; - n -= 2; - } - temp = n >> 2; - if (temp) { - long *ldest = dest; - const long *lsrc = src; - temp--; - do - *ldest++ = *lsrc++; - while (temp--); - dest = ldest; - src = lsrc; - } - if (n & 2) { - short *sdest = dest; - const short *ssrc = src; - *sdest++ = *ssrc++; - dest = sdest; - src = ssrc; - } - if (n & 1) { - char *cdest = dest; - const char *csrc = src; - *cdest = *csrc; - } - } else { - dest = (char *)dest + n; - src = (const char *)src + n; - if ((long)dest & 1) { - char *cdest = dest; - const char *csrc = src; - *--cdest = *--csrc; - dest = cdest; - src = csrc; - n--; - } - if (n > 2 && (long)dest & 2) { - short *sdest = dest; - const short *ssrc = src; - *--sdest = *--ssrc; - dest = sdest; - src = ssrc; - n -= 2; - } - temp = n >> 2; - if (temp) { - long *ldest = dest; - const long *lsrc = src; - temp--; - do - *--ldest = *--lsrc; - while (temp--); - dest = ldest; - src = lsrc; - } - if (n & 2) { - short *sdest = dest; - const short *ssrc = src; - *--sdest = *--ssrc; - dest = sdest; - src = ssrc; - } - if (n & 1) { - char *cdest = dest; - const char *csrc = src; - *--cdest = *--csrc; - } - } - return xdest; -} -EXPORT_SYMBOL(memmove); diff --git a/arch/m68k/mm/Makefile b/arch/m68k/mm/Makefile index b60270e4954..09cadf1058d 100644 --- a/arch/m68k/mm/Makefile +++ b/arch/m68k/mm/Makefile @@ -1,5 +1,9 @@ -ifdef CONFIG_MMU -include arch/m68k/mm/Makefile_mm -else -include arch/m68k/mm/Makefile_no -endif +# +# Makefile for the linux m68k-specific parts of the memory manager. +# + +obj-y := init.o + +obj-$(CONFIG_MMU) += cache.o fault.o hwtest.o +obj-$(CONFIG_MMU_MOTOROLA) += kmap.o memory.o motorola.o +obj-$(CONFIG_MMU_SUN3) += sun3kmap.o sun3mmu.o diff --git a/arch/m68k/mm/Makefile_mm b/arch/m68k/mm/Makefile_mm deleted file mode 100644 index 5eaa43c4cb3..00000000000 --- a/arch/m68k/mm/Makefile_mm +++ /dev/null @@ -1,8 +0,0 @@ -# -# Makefile for the linux m68k-specific parts of the memory manager. -# - -obj-y := cache.o init.o fault.o hwtest.o - -obj-$(CONFIG_MMU_MOTOROLA) += kmap.o memory.o motorola.o -obj-$(CONFIG_MMU_SUN3) += sun3kmap.o sun3mmu.o diff --git a/arch/m68k/mm/Makefile_no b/arch/m68k/mm/Makefile_no deleted file mode 100644 index b54ab6b4b52..00000000000 --- a/arch/m68k/mm/Makefile_no +++ /dev/null @@ -1,5 +0,0 @@ -# -# Makefile for the linux m68knommu specific parts of the memory manager. -# - -obj-y += init.o kmap.o diff --git a/arch/m68k/mm/init_no.c b/arch/m68k/mm/init_no.c index 8a6653f56bd..7cbd7bd1f8b 100644 --- a/arch/m68k/mm/init_no.c +++ b/arch/m68k/mm/init_no.c @@ -38,28 +38,10 @@ #include <asm/system.h> #include <asm/machdep.h> -#undef DEBUG - -extern void die_if_kernel(char *,struct pt_regs *,long); -extern void free_initmem(void); - /* - * BAD_PAGE is the page that is used for page faults when linux - * is out-of-memory. Older versions of linux just did a - * do_exit(), but using this instead means there is less risk - * for a process dying in kernel mode, possibly leaving a inode - * unused etc.. - * - * BAD_PAGETABLE is the accompanying page-table: it is initialized - * to point to BAD_PAGE entries. - * * ZERO_PAGE is a special page that is used for zero-initialized * data and COW. */ -static unsigned long empty_bad_page_table; - -static unsigned long empty_bad_page; - unsigned long empty_zero_page; extern unsigned long memory_start; @@ -77,22 +59,9 @@ void __init paging_init(void) * Make sure start_mem is page aligned, otherwise bootmem and * page_alloc get different views of the world. */ -#ifdef DEBUG - unsigned long start_mem = PAGE_ALIGN(memory_start); -#endif unsigned long end_mem = memory_end & PAGE_MASK; + unsigned long zones_size[MAX_NR_ZONES] = {0, }; -#ifdef DEBUG - printk (KERN_DEBUG "start_mem is %#lx\nvirtual_end is %#lx\n", - start_mem, end_mem); -#endif - - /* - * Initialize the bad page table and bad page to point - * to a couple of allocated pages. - */ - empty_bad_page_table = (unsigned long)alloc_bootmem_pages(PAGE_SIZE); - empty_bad_page = (unsigned long)alloc_bootmem_pages(PAGE_SIZE); empty_zero_page = (unsigned long)alloc_bootmem_pages(PAGE_SIZE); memset((void *)empty_zero_page, 0, PAGE_SIZE); @@ -101,19 +70,8 @@ void __init paging_init(void) */ set_fs (USER_DS); -#ifdef DEBUG - printk (KERN_DEBUG "before free_area_init\n"); - - printk (KERN_DEBUG "free_area_init -> start_mem is %#lx\nvirtual_end is %#lx\n", - start_mem, end_mem); -#endif - - { - unsigned long zones_size[MAX_NR_ZONES] = {0, }; - - zones_size[ZONE_DMA] = (end_mem - PAGE_OFFSET) >> PAGE_SHIFT; - free_area_init(zones_size); - } + zones_size[ZONE_DMA] = (end_mem - PAGE_OFFSET) >> PAGE_SHIFT; + free_area_init(zones_size); } void __init mem_init(void) @@ -166,8 +124,7 @@ void free_initrd_mem(unsigned long start, unsigned long end) } #endif -void -free_initmem() +void free_initmem(void) { #ifdef CONFIG_RAMKERNEL unsigned long addr; diff --git a/arch/m68k/mm/kmap.c b/arch/m68k/mm/kmap.c index a373d136b2b..69345849454 100644 --- a/arch/m68k/mm/kmap.c +++ b/arch/m68k/mm/kmap.c @@ -1,5 +1,367 @@ -#ifdef CONFIG_MMU -#include "kmap_mm.c" +/* + * linux/arch/m68k/mm/kmap.c + * + * Copyright (C) 1997 Roman Hodek + * + * 10/01/99 cleaned up the code and changing to the same interface + * used by other architectures /Roman Zippel + */ + +#include <linux/module.h> +#include <linux/mm.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/types.h> +#include <linux/slab.h> +#include <linux/vmalloc.h> + +#include <asm/setup.h> +#include <asm/segment.h> +#include <asm/page.h> +#include <asm/pgalloc.h> +#include <asm/io.h> +#include <asm/system.h> + +#undef DEBUG + +#define PTRTREESIZE (256*1024) + +/* + * For 040/060 we can use the virtual memory area like other architectures, + * but for 020/030 we want to use early termination page descriptor and we + * can't mix this with normal page descriptors, so we have to copy that code + * (mm/vmalloc.c) and return appriorate aligned addresses. + */ + +#ifdef CPU_M68040_OR_M68060_ONLY + +#define IO_SIZE PAGE_SIZE + +static inline struct vm_struct *get_io_area(unsigned long size) +{ + return get_vm_area(size, VM_IOREMAP); +} + + +static inline void free_io_area(void *addr) +{ + vfree((void *)(PAGE_MASK & (unsigned long)addr)); +} + #else -#include "kmap_no.c" + +#define IO_SIZE (256*1024) + +static struct vm_struct *iolist; + +static struct vm_struct *get_io_area(unsigned long size) +{ + unsigned long addr; + struct vm_struct **p, *tmp, *area; + + area = kmalloc(sizeof(*area), GFP_KERNEL); + if (!area) + return NULL; + addr = KMAP_START; + for (p = &iolist; (tmp = *p) ; p = &tmp->next) { + if (size + addr < (unsigned long)tmp->addr) + break; + if (addr > KMAP_END-size) { + kfree(area); + return NULL; + } + addr = tmp->size + (unsigned long)tmp->addr; + } + area->addr = (void *)addr; + area->size = size + IO_SIZE; + area->next = *p; + *p = area; + return area; +} + +static inline void free_io_area(void *addr) +{ + struct vm_struct **p, *tmp; + + if (!addr) + return; + addr = (void *)((unsigned long)addr & -IO_SIZE); + for (p = &iolist ; (tmp = *p) ; p = &tmp->next) { + if (tmp->addr == addr) { + *p = tmp->next; + __iounmap(tmp->addr, tmp->size); + kfree(tmp); + return; + } + } +} + #endif + +/* + * Map some physical address range into the kernel address space. + */ +/* Rewritten by Andreas Schwab to remove all races. */ + +void __iomem *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag) +{ + struct vm_struct *area; + unsigned long virtaddr, retaddr; + long offset; + pgd_t *pgd_dir; + pmd_t *pmd_dir; + pte_t *pte_dir; + + /* + * Don't allow mappings that wrap.. + */ + if (!size || physaddr > (unsigned long)(-size)) + return NULL; + +#ifdef CONFIG_AMIGA + if (MACH_IS_AMIGA) { + if ((physaddr >= 0x40000000) && (physaddr + size < 0x60000000) + && (cacheflag == IOMAP_NOCACHE_SER)) + return (void __iomem *)physaddr; + } +#endif + +#ifdef DEBUG + printk("ioremap: 0x%lx,0x%lx(%d) - ", physaddr, size, cacheflag); +#endif + /* + * Mappings have to be aligned + */ + offset = physaddr & (IO_SIZE - 1); + physaddr &= -IO_SIZE; + size = (size + offset + IO_SIZE - 1) & -IO_SIZE; + + /* + * Ok, go for it.. + */ + area = get_io_area(size); + if (!area) + return NULL; + + virtaddr = (unsigned long)area->addr; + retaddr = virtaddr + offset; +#ifdef DEBUG + printk("0x%lx,0x%lx,0x%lx", physaddr, virtaddr, retaddr); +#endif + + /* + * add cache and table flags to physical address + */ + if (CPU_IS_040_OR_060) { + physaddr |= (_PAGE_PRESENT | _PAGE_GLOBAL040 | + _PAGE_ACCESSED | _PAGE_DIRTY); + switch (cacheflag) { + case IOMAP_FULL_CACHING: + physaddr |= _PAGE_CACHE040; + break; + case IOMAP_NOCACHE_SER: + default: + physaddr |= _PAGE_NOCACHE_S; + break; + case IOMAP_NOCACHE_NONSER: + physaddr |= _PAGE_NOCACHE; + break; + case IOMAP_WRITETHROUGH: + physaddr |= _PAGE_CACHE040W; + break; + } + } else { + physaddr |= (_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_DIRTY); + switch (cacheflag) { + case IOMAP_NOCACHE_SER: + case IOMAP_NOCACHE_NONSER: + default: + physaddr |= _PAGE_NOCACHE030; + break; + case IOMAP_FULL_CACHING: + case IOMAP_WRITETHROUGH: + break; + } + } + + while ((long)size > 0) { +#ifdef DEBUG + if (!(virtaddr & (PTRTREESIZE-1))) + printk ("\npa=%#lx va=%#lx ", physaddr, virtaddr); +#endif + pgd_dir = pgd_offset_k(virtaddr); + pmd_dir = pmd_alloc(&init_mm, pgd_dir, virtaddr); + if (!pmd_dir) { + printk("ioremap: no mem for pmd_dir\n"); + return NULL; + } + + if (CPU_IS_020_OR_030) { + pmd_dir->pmd[(virtaddr/PTRTREESIZE) & 15] = physaddr; + physaddr += PTRTREESIZE; + virtaddr += PTRTREESIZE; + size -= PTRTREESIZE; + } else { + pte_dir = pte_alloc_kernel(pmd_dir, virtaddr); + if (!pte_dir) { + printk("ioremap: no mem for pte_dir\n"); + return NULL; + } + + pte_val(*pte_dir) = physaddr; + virtaddr += PAGE_SIZE; + physaddr += PAGE_SIZE; + size -= PAGE_SIZE; + } + } +#ifdef DEBUG + printk("\n"); +#endif + flush_tlb_all(); + + return (void __iomem *)retaddr; +} +EXPORT_SYMBOL(__ioremap); + +/* + * Unmap a ioremap()ed region again + */ +void iounmap(void __iomem *addr) +{ +#ifdef CONFIG_AMIGA + if ((!MACH_IS_AMIGA) || + (((unsigned long)addr < 0x40000000) || + ((unsigned long)addr > 0x60000000))) + free_io_area((__force void *)addr); +#else + free_io_area((__force void *)addr); +#endif +} +EXPORT_SYMBOL(iounmap); + +/* + * __iounmap unmaps nearly everything, so be careful + * it doesn't free currently pointer/page tables anymore but it + * wans't used anyway and might be added later. + */ +void __iounmap(void *addr, unsigned long size) +{ + unsigned long virtaddr = (unsigned long)addr; + pgd_t *pgd_dir; + pmd_t *pmd_dir; + pte_t *pte_dir; + + while ((long)size > 0) { + pgd_dir = pgd_offset_k(virtaddr); + if (pgd_bad(*pgd_dir)) { + printk("iounmap: bad pgd(%08lx)\n", pgd_val(*pgd_dir)); + pgd_clear(pgd_dir); + return; + } + pmd_dir = pmd_offset(pgd_dir, virtaddr); + + if (CPU_IS_020_OR_030) { + int pmd_off = (virtaddr/PTRTREESIZE) & 15; + int pmd_type = pmd_dir->pmd[pmd_off] & _DESCTYPE_MASK; + + if (pmd_type == _PAGE_PRESENT) { + pmd_dir->pmd[pmd_off] = 0; + virtaddr += PTRTREESIZE; + size -= PTRTREESIZE; + continue; + } else if (pmd_type == 0) + continue; + } + + if (pmd_bad(*pmd_dir)) { + printk("iounmap: bad pmd (%08lx)\n", pmd_val(*pmd_dir)); + pmd_clear(pmd_dir); + return; + } + pte_dir = pte_offset_kernel(pmd_dir, virtaddr); + + pte_val(*pte_dir) = 0; + virtaddr += PAGE_SIZE; + size -= PAGE_SIZE; + } + + flush_tlb_all(); +} + +/* + * Set new cache mode for some kernel address space. + * The caller must push data for that range itself, if such data may already + * be in the cache. + */ +void kernel_set_cachemode(void *addr, unsigned long size, int cmode) +{ + unsigned long virtaddr = (unsigned long)addr; + pgd_t *pgd_dir; + pmd_t *pmd_dir; + pte_t *pte_dir; + + if (CPU_IS_040_OR_060) { + switch (cmode) { + case IOMAP_FULL_CACHING: + cmode = _PAGE_CACHE040; + break; + case IOMAP_NOCACHE_SER: + default: + cmode = _PAGE_NOCACHE_S; + break; + case IOMAP_NOCACHE_NONSER: + cmode = _PAGE_NOCACHE; + break; + case IOMAP_WRITETHROUGH: + cmode = _PAGE_CACHE040W; + break; + } + } else { + switch (cmode) { + case IOMAP_NOCACHE_SER: + case IOMAP_NOCACHE_NONSER: + default: + cmode = _PAGE_NOCACHE030; + break; + case IOMAP_FULL_CACHING: + case IOMAP_WRITETHROUGH: + cmode = 0; + } + } + + while ((long)size > 0) { + pgd_dir = pgd_offset_k(virtaddr); + if (pgd_bad(*pgd_dir)) { + printk("iocachemode: bad pgd(%08lx)\n", pgd_val(*pgd_dir)); + pgd_clear(pgd_dir); + return; + } + pmd_dir = pmd_offset(pgd_dir, virtaddr); + + if (CPU_IS_020_OR_030) { + int pmd_off = (virtaddr/PTRTREESIZE) & 15; + + if ((pmd_dir->pmd[pmd_off] & _DESCTYPE_MASK) == _PAGE_PRESENT) { + pmd_dir->pmd[pmd_off] = (pmd_dir->pmd[pmd_off] & + _CACHEMASK040) | cmode; + virtaddr += PTRTREESIZE; + size -= PTRTREESIZE; + continue; + } + } + + if (pmd_bad(*pmd_dir)) { + printk("iocachemode: bad pmd (%08lx)\n", pmd_val(*pmd_dir)); + pmd_clear(pmd_dir); + return; + } + pte_dir = pte_offset_kernel(pmd_dir, virtaddr); + + pte_val(*pte_dir) = (pte_val(*pte_dir) & _CACHEMASK040) | cmode; + virtaddr += PAGE_SIZE; + size -= PAGE_SIZE; + } + + flush_tlb_all(); +} +EXPORT_SYMBOL(kernel_set_cachemode); diff --git a/arch/m68k/mm/kmap_mm.c b/arch/m68k/mm/kmap_mm.c deleted file mode 100644 index 69345849454..00000000000 --- a/arch/m68k/mm/kmap_mm.c +++ /dev/null @@ -1,367 +0,0 @@ -/* - * linux/arch/m68k/mm/kmap.c - * - * Copyright (C) 1997 Roman Hodek - * - * 10/01/99 cleaned up the code and changing to the same interface - * used by other architectures /Roman Zippel - */ - -#include <linux/module.h> -#include <linux/mm.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/types.h> -#include <linux/slab.h> -#include <linux/vmalloc.h> - -#include <asm/setup.h> -#include <asm/segment.h> -#include <asm/page.h> -#include <asm/pgalloc.h> -#include <asm/io.h> -#include <asm/system.h> - -#undef DEBUG - -#define PTRTREESIZE (256*1024) - -/* - * For 040/060 we can use the virtual memory area like other architectures, - * but for 020/030 we want to use early termination page descriptor and we - * can't mix this with normal page descriptors, so we have to copy that code - * (mm/vmalloc.c) and return appriorate aligned addresses. - */ - -#ifdef CPU_M68040_OR_M68060_ONLY - -#define IO_SIZE PAGE_SIZE - -static inline struct vm_struct *get_io_area(unsigned long size) -{ - return get_vm_area(size, VM_IOREMAP); -} - - -static inline void free_io_area(void *addr) -{ - vfree((void *)(PAGE_MASK & (unsigned long)addr)); -} - -#else - -#define IO_SIZE (256*1024) - -static struct vm_struct *iolist; - -static struct vm_struct *get_io_area(unsigned long size) -{ - unsigned long addr; - struct vm_struct **p, *tmp, *area; - - area = kmalloc(sizeof(*area), GFP_KERNEL); - if (!area) - return NULL; - addr = KMAP_START; - for (p = &iolist; (tmp = *p) ; p = &tmp->next) { - if (size + addr < (unsigned long)tmp->addr) - break; - if (addr > KMAP_END-size) { - kfree(area); - return NULL; - } - addr = tmp->size + (unsigned long)tmp->addr; - } - area->addr = (void *)addr; - area->size = size + IO_SIZE; - area->next = *p; - *p = area; - return area; -} - -static inline void free_io_area(void *addr) -{ - struct vm_struct **p, *tmp; - - if (!addr) - return; - addr = (void *)((unsigned long)addr & -IO_SIZE); - for (p = &iolist ; (tmp = *p) ; p = &tmp->next) { - if (tmp->addr == addr) { - *p = tmp->next; - __iounmap(tmp->addr, tmp->size); - kfree(tmp); - return; - } - } -} - -#endif - -/* - * Map some physical address range into the kernel address space. - */ -/* Rewritten by Andreas Schwab to remove all races. */ - -void __iomem *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag) -{ - struct vm_struct *area; - unsigned long virtaddr, retaddr; - long offset; - pgd_t *pgd_dir; - pmd_t *pmd_dir; - pte_t *pte_dir; - - /* - * Don't allow mappings that wrap.. - */ - if (!size || physaddr > (unsigned long)(-size)) - return NULL; - -#ifdef CONFIG_AMIGA - if (MACH_IS_AMIGA) { - if ((physaddr >= 0x40000000) && (physaddr + size < 0x60000000) - && (cacheflag == IOMAP_NOCACHE_SER)) - return (void __iomem *)physaddr; - } -#endif - -#ifdef DEBUG - printk("ioremap: 0x%lx,0x%lx(%d) - ", physaddr, size, cacheflag); -#endif - /* - * Mappings have to be aligned - */ - offset = physaddr & (IO_SIZE - 1); - physaddr &= -IO_SIZE; - size = (size + offset + IO_SIZE - 1) & -IO_SIZE; - - /* - * Ok, go for it.. - */ - area = get_io_area(size); - if (!area) - return NULL; - - virtaddr = (unsigned long)area->addr; - retaddr = virtaddr + offset; -#ifdef DEBUG - printk("0x%lx,0x%lx,0x%lx", physaddr, virtaddr, retaddr); -#endif - - /* - * add cache and table flags to physical address - */ - if (CPU_IS_040_OR_060) { - physaddr |= (_PAGE_PRESENT | _PAGE_GLOBAL040 | - _PAGE_ACCESSED | _PAGE_DIRTY); - switch (cacheflag) { - case IOMAP_FULL_CACHING: - physaddr |= _PAGE_CACHE040; - break; - case IOMAP_NOCACHE_SER: - default: - physaddr |= _PAGE_NOCACHE_S; - break; - case IOMAP_NOCACHE_NONSER: - physaddr |= _PAGE_NOCACHE; - break; - case IOMAP_WRITETHROUGH: - physaddr |= _PAGE_CACHE040W; - break; - } - } else { - physaddr |= (_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_DIRTY); - switch (cacheflag) { - case IOMAP_NOCACHE_SER: - case IOMAP_NOCACHE_NONSER: - default: - physaddr |= _PAGE_NOCACHE030; - break; - case IOMAP_FULL_CACHING: - case IOMAP_WRITETHROUGH: - break; - } - } - - while ((long)size > 0) { -#ifdef DEBUG - if (!(virtaddr & (PTRTREESIZE-1))) - printk ("\npa=%#lx va=%#lx ", physaddr, virtaddr); -#endif - pgd_dir = pgd_offset_k(virtaddr); - pmd_dir = pmd_alloc(&init_mm, pgd_dir, virtaddr); - if (!pmd_dir) { - printk("ioremap: no mem for pmd_dir\n"); - return NULL; - } - - if (CPU_IS_020_OR_030) { - pmd_dir->pmd[(virtaddr/PTRTREESIZE) & 15] = physaddr; - physaddr += PTRTREESIZE; - virtaddr += PTRTREESIZE; - size -= PTRTREESIZE; - } else { - pte_dir = pte_alloc_kernel(pmd_dir, virtaddr); - if (!pte_dir) { - printk("ioremap: no mem for pte_dir\n"); - return NULL; - } - - pte_val(*pte_dir) = physaddr; - virtaddr += PAGE_SIZE; - physaddr += PAGE_SIZE; - size -= PAGE_SIZE; - } - } -#ifdef DEBUG - printk("\n"); -#endif - flush_tlb_all(); - - return (void __iomem *)retaddr; -} -EXPORT_SYMBOL(__ioremap); - -/* - * Unmap a ioremap()ed region again - */ -void iounmap(void __iomem *addr) -{ -#ifdef CONFIG_AMIGA - if ((!MACH_IS_AMIGA) || - (((unsigned long)addr < 0x40000000) || - ((unsigned long)addr > 0x60000000))) - free_io_area((__force void *)addr); -#else - free_io_area((__force void *)addr); -#endif -} -EXPORT_SYMBOL(iounmap); - -/* - * __iounmap unmaps nearly everything, so be careful - * it doesn't free currently pointer/page tables anymore but it - * wans't used anyway and might be added later. - */ -void __iounmap(void *addr, unsigned long size) -{ - unsigned long virtaddr = (unsigned long)addr; - pgd_t *pgd_dir; - pmd_t *pmd_dir; - pte_t *pte_dir; - - while ((long)size > 0) { - pgd_dir = pgd_offset_k(virtaddr); - if (pgd_bad(*pgd_dir)) { - printk("iounmap: bad pgd(%08lx)\n", pgd_val(*pgd_dir)); - pgd_clear(pgd_dir); - return; - } - pmd_dir = pmd_offset(pgd_dir, virtaddr); - - if (CPU_IS_020_OR_030) { - int pmd_off = (virtaddr/PTRTREESIZE) & 15; - int pmd_type = pmd_dir->pmd[pmd_off] & _DESCTYPE_MASK; - - if (pmd_type == _PAGE_PRESENT) { - pmd_dir->pmd[pmd_off] = 0; - virtaddr += PTRTREESIZE; - size -= PTRTREESIZE; - continue; - } else if (pmd_type == 0) - continue; - } - - if (pmd_bad(*pmd_dir)) { - printk("iounmap: bad pmd (%08lx)\n", pmd_val(*pmd_dir)); - pmd_clear(pmd_dir); - return; - } - pte_dir = pte_offset_kernel(pmd_dir, virtaddr); - - pte_val(*pte_dir) = 0; - virtaddr += PAGE_SIZE; - size -= PAGE_SIZE; - } - - flush_tlb_all(); -} - -/* - * Set new cache mode for some kernel address space. - * The caller must push data for that range itself, if such data may already - * be in the cache. - */ -void kernel_set_cachemode(void *addr, unsigned long size, int cmode) -{ - unsigned long virtaddr = (unsigned long)addr; - pgd_t *pgd_dir; - pmd_t *pmd_dir; - pte_t *pte_dir; - - if (CPU_IS_040_OR_060) { - switch (cmode) { - case IOMAP_FULL_CACHING: - cmode = _PAGE_CACHE040; - break; - case IOMAP_NOCACHE_SER: - default: - cmode = _PAGE_NOCACHE_S; - break; - case IOMAP_NOCACHE_NONSER: - cmode = _PAGE_NOCACHE; - break; - case IOMAP_WRITETHROUGH: - cmode = _PAGE_CACHE040W; - break; - } - } else { - switch (cmode) { - case IOMAP_NOCACHE_SER: - case IOMAP_NOCACHE_NONSER: - default: - cmode = _PAGE_NOCACHE030; - break; - case IOMAP_FULL_CACHING: - case IOMAP_WRITETHROUGH: - cmode = 0; - } - } - - while ((long)size > 0) { - pgd_dir = pgd_offset_k(virtaddr); - if (pgd_bad(*pgd_dir)) { - printk("iocachemode: bad pgd(%08lx)\n", pgd_val(*pgd_dir)); - pgd_clear(pgd_dir); - return; - } - pmd_dir = pmd_offset(pgd_dir, virtaddr); - - if (CPU_IS_020_OR_030) { - int pmd_off = (virtaddr/PTRTREESIZE) & 15; - - if ((pmd_dir->pmd[pmd_off] & _DESCTYPE_MASK) == _PAGE_PRESENT) { - pmd_dir->pmd[pmd_off] = (pmd_dir->pmd[pmd_off] & - _CACHEMASK040) | cmode; - virtaddr += PTRTREESIZE; - size -= PTRTREESIZE; - continue; - } - } - - if (pmd_bad(*pmd_dir)) { - printk("iocachemode: bad pmd (%08lx)\n", pmd_val(*pmd_dir)); - pmd_clear(pmd_dir); - return; - } - pte_dir = pte_offset_kernel(pmd_dir, virtaddr); - - pte_val(*pte_dir) = (pte_val(*pte_dir) & _CACHEMASK040) | cmode; - virtaddr += PAGE_SIZE; - size -= PAGE_SIZE; - } - - flush_tlb_all(); -} -EXPORT_SYMBOL(kernel_set_cachemode); diff --git a/arch/m68k/mm/kmap_no.c b/arch/m68k/mm/kmap_no.c deleted file mode 100644 index ece8d5ad4e6..00000000000 --- a/arch/m68k/mm/kmap_no.c +++ /dev/null @@ -1,45 +0,0 @@ -/* - * linux/arch/m68knommu/mm/kmap.c - * - * Copyright (C) 2000 Lineo, <davidm@snapgear.com> - * Copyright (C) 2000-2002 David McCullough <davidm@snapgear.com> - */ - -#include <linux/mm.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/types.h> -#include <linux/vmalloc.h> - -#include <asm/setup.h> -#include <asm/segment.h> -#include <asm/page.h> -#include <asm/pgalloc.h> -#include <asm/io.h> -#include <asm/system.h> - -#undef DEBUG - -/* - * Map some physical address range into the kernel address space. - */ -void *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag) -{ - return (void *)physaddr; -} - -/* - * Unmap a ioremap()ed region again. - */ -void iounmap(void *addr) -{ -} - -/* - * Set new cache mode for some kernel address space. - * The caller must push data for that range itself, if such data may already - * be in the cache. - */ -void kernel_set_cachemode(void *addr, unsigned long size, int cmode) -{ -} diff --git a/arch/m68k/platform/68328/entry.S b/arch/m68k/platform/68328/entry.S index 676960cf022..f68dce766c0 100644 --- a/arch/m68k/platform/68328/entry.S +++ b/arch/m68k/platform/68328/entry.S @@ -10,7 +10,6 @@ * Linux/m68k support by Hamish Macdonald */ -#include <linux/sys.h> #include <linux/linkage.h> #include <asm/thread_info.h> #include <asm/unistd.h> @@ -80,7 +79,7 @@ ENTRY(system_call) movel %sp,%d1 /* get thread_info pointer */ andl #-THREAD_SIZE,%d1 movel %d1,%a2 - btst #(TIF_SYSCALL_TRACE%8),%a2@(TI_FLAGS+(31-TIF_SYSCALL_TRACE)/8) + btst #(TIF_SYSCALL_TRACE%8),%a2@(TINFO_FLAGS+(31-TIF_SYSCALL_TRACE)/8) jne do_trace cmpl #NR_syscalls,%d0 jcc badsys @@ -107,12 +106,12 @@ Luser_return: andl #-THREAD_SIZE,%d1 movel %d1,%a2 1: - move %a2@(TI_FLAGS),%d1 /* thread_info->flags */ + move %a2@(TINFO_FLAGS),%d1 /* thread_info->flags */ jne Lwork_to_do RESTORE_ALL Lwork_to_do: - movel %a2@(TI_FLAGS),%d1 /* thread_info->flags */ + movel %a2@(TINFO_FLAGS),%d1 /* thread_info->flags */ btst #TIF_NEED_RESCHED,%d1 jne reschedule diff --git a/arch/m68k/platform/68360/entry.S b/arch/m68k/platform/68360/entry.S index 46c1b18c9dc..a07b14feed9 100644 --- a/arch/m68k/platform/68360/entry.S +++ b/arch/m68k/platform/68360/entry.S @@ -12,7 +12,6 @@ * M68360 Port by SED Systems, and Lineo. */ -#include <linux/sys.h> #include <linux/linkage.h> #include <asm/thread_info.h> #include <asm/unistd.h> @@ -76,7 +75,7 @@ ENTRY(system_call) movel %sp,%d1 /* get thread_info pointer */ andl #-THREAD_SIZE,%d1 movel %d1,%a2 - btst #(TIF_SYSCALL_TRACE%8),%a2@(TI_FLAGS+(31-TIF_SYSCALL_TRACE)/8) + btst #(TIF_SYSCALL_TRACE%8),%a2@(TINFO_FLAGS+(31-TIF_SYSCALL_TRACE)/8) jne do_trace cmpl #NR_syscalls,%d0 jcc badsys @@ -103,12 +102,12 @@ Luser_return: andl #-THREAD_SIZE,%d1 movel %d1,%a2 1: - move %a2@(TI_FLAGS),%d1 /* thread_info->flags */ + move %a2@(TINFO_FLAGS),%d1 /* thread_info->flags */ jne Lwork_to_do RESTORE_ALL Lwork_to_do: - movel %a2@(TI_FLAGS),%d1 /* thread_info->flags */ + movel %a2@(TINFO_FLAGS),%d1 /* thread_info->flags */ btst #TIF_NEED_RESCHED,%d1 jne reschedule diff --git a/arch/m68k/platform/coldfire/dma.c b/arch/m68k/platform/coldfire/dma.c index e88b95e2cc6..df5ce20d181 100644 --- a/arch/m68k/platform/coldfire/dma.c +++ b/arch/m68k/platform/coldfire/dma.c @@ -9,6 +9,7 @@ /***************************************************************************/ #include <linux/kernel.h> +#include <linux/module.h> #include <asm/dma.h> #include <asm/coldfire.h> #include <asm/mcfsim.h> @@ -33,7 +34,9 @@ unsigned int dma_base_addr[MAX_M68K_DMA_CHANNELS] = { MCFDMA_BASE3, #endif }; +EXPORT_SYMBOL(dma_base_addr); unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS]; +EXPORT_SYMBOL(dma_device_address); /***************************************************************************/ diff --git a/arch/m68k/platform/coldfire/entry.S b/arch/m68k/platform/coldfire/entry.S index eab63f09965..27c2b001161 100644 --- a/arch/m68k/platform/coldfire/entry.S +++ b/arch/m68k/platform/coldfire/entry.S @@ -26,7 +26,6 @@ * Bug, speed and maintainability fixes by Philippe De Muyter <phdm@macqel.be> */ -#include <linux/sys.h> #include <linux/linkage.h> #include <asm/unistd.h> #include <asm/thread_info.h> @@ -78,7 +77,7 @@ ENTRY(system_call) movel %d2,%a0 movel %a0@,%a1 /* save top of frame */ movel %sp,%a1@(TASK_THREAD+THREAD_ESP0) - btst #(TIF_SYSCALL_TRACE%8),%a0@(TI_FLAGS+(31-TIF_SYSCALL_TRACE)/8) + btst #(TIF_SYSCALL_TRACE%8),%a0@(TINFO_FLAGS+(31-TIF_SYSCALL_TRACE)/8) bnes 1f movel %d3,%a0 @@ -113,11 +112,11 @@ ret_from_exception: movel %sp,%d1 /* get thread_info pointer */ andl #-THREAD_SIZE,%d1 /* at base of kernel stack */ movel %d1,%a0 - movel %a0@(TI_FLAGS),%d1 /* get thread_info->flags */ + movel %a0@(TINFO_FLAGS),%d1 /* get thread_info->flags */ andl #(1<<TIF_NEED_RESCHED),%d1 jeq Lkernel_return - movel %a0@(TI_PREEMPTCOUNT),%d1 + movel %a0@(TINFO_PREEMPT),%d1 cmpl #0,%d1 jne Lkernel_return @@ -137,14 +136,14 @@ Luser_return: movel %sp,%d1 /* get thread_info pointer */ andl #-THREAD_SIZE,%d1 /* at base of kernel stack */ movel %d1,%a0 - movel %a0@(TI_FLAGS),%d1 /* get thread_info->flags */ + movel %a0@(TINFO_FLAGS),%d1 /* get thread_info->flags */ jne Lwork_to_do /* still work to do */ Lreturn: RESTORE_USER Lwork_to_do: - movel %a0@(TI_FLAGS),%d1 /* get thread_info->flags */ + movel %a0@(TINFO_FLAGS),%d1 /* get thread_info->flags */ move #0x2000,%sr /* enable intrs again */ btst #TIF_NEED_RESCHED,%d1 jne reschedule diff --git a/arch/m68k/platform/coldfire/head.S b/arch/m68k/platform/coldfire/head.S index 6ae91a49918..c33483824a2 100644 --- a/arch/m68k/platform/coldfire/head.S +++ b/arch/m68k/platform/coldfire/head.S @@ -8,7 +8,6 @@ /*****************************************************************************/ -#include <linux/sys.h> #include <linux/linkage.h> #include <linux/init.h> #include <asm/asm-offsets.h> diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S index 01af3876cf9..a81176f44c7 100644 --- a/arch/mips/kernel/vmlinux.lds.S +++ b/arch/mips/kernel/vmlinux.lds.S @@ -118,7 +118,7 @@ SECTIONS EXIT_DATA } - PERCPU(1 << CONFIG_MIPS_L1_CACHE_SHIFT, PAGE_SIZE) + PERCPU_SECTION(1 << CONFIG_MIPS_L1_CACHE_SHIFT) . = ALIGN(PAGE_SIZE); __init_end = .; /* freed after init ends here */ diff --git a/arch/mn10300/kernel/vmlinux.lds.S b/arch/mn10300/kernel/vmlinux.lds.S index 968bcd2cb02..6f702a6ab39 100644 --- a/arch/mn10300/kernel/vmlinux.lds.S +++ b/arch/mn10300/kernel/vmlinux.lds.S @@ -70,7 +70,7 @@ SECTIONS .exit.text : { EXIT_TEXT; } .exit.data : { EXIT_DATA; } - PERCPU(32, PAGE_SIZE) + PERCPU_SECTION(32) . = ALIGN(PAGE_SIZE); __init_end = .; /* freed after init ends here */ diff --git a/arch/parisc/kernel/vmlinux.lds.S b/arch/parisc/kernel/vmlinux.lds.S index e1a55849bfa..fa6f2b8163e 100644 --- a/arch/parisc/kernel/vmlinux.lds.S +++ b/arch/parisc/kernel/vmlinux.lds.S @@ -149,7 +149,7 @@ SECTIONS EXIT_DATA } - PERCPU(L1_CACHE_BYTES, PAGE_SIZE) + PERCPU_SECTION(L1_CACHE_BYTES) . = ALIGN(PAGE_SIZE); __init_end = .; /* freed after init ends here */ diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S index b9150f07d26..920276c0f6a 100644 --- a/arch/powerpc/kernel/vmlinux.lds.S +++ b/arch/powerpc/kernel/vmlinux.lds.S @@ -160,7 +160,7 @@ SECTIONS INIT_RAM_FS } - PERCPU(L1_CACHE_BYTES, PAGE_SIZE) + PERCPU_SECTION(L1_CACHE_BYTES) . = ALIGN(8); .machine.desc : AT(ADDR(.machine.desc) - LOAD_OFFSET) { diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index 4a7f14079e0..ff2d2371b2e 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -230,17 +230,6 @@ config SYSVIPC_COMPAT config AUDIT_ARCH def_bool y -config S390_EXEC_PROTECT - def_bool y - prompt "Data execute protection" - help - This option allows to enable a buffer overflow protection for user - space programs and it also selects the addressing mode option above. - The kernel parameter noexec=on will enable this feature and also - switch the addressing modes, default is disabled. Enabling this (via - kernel parameter) on machines earlier than IBM System z9 this will - reduce system performance. - comment "Code generation options" choice diff --git a/arch/s390/appldata/appldata_base.c b/arch/s390/appldata/appldata_base.c index 5c91995b74e..24bff4f1cc5 100644 --- a/arch/s390/appldata/appldata_base.c +++ b/arch/s390/appldata/appldata_base.c @@ -130,9 +130,7 @@ static void appldata_work_fn(struct work_struct *work) { struct list_head *lh; struct appldata_ops *ops; - int i; - i = 0; get_online_cpus(); mutex_lock(&appldata_ops_mutex); list_for_each(lh, &appldata_ops_list) { diff --git a/arch/s390/include/asm/cmpxchg.h b/arch/s390/include/asm/cmpxchg.h index 7488e52efa9..81d7908416c 100644 --- a/arch/s390/include/asm/cmpxchg.h +++ b/arch/s390/include/asm/cmpxchg.h @@ -167,7 +167,6 @@ static inline unsigned long __cmpxchg(void *ptr, unsigned long old, #ifdef CONFIG_64BIT #define cmpxchg64(ptr, o, n) \ ({ \ - BUILD_BUG_ON(sizeof(*(ptr)) != 8); \ cmpxchg((ptr), (o), (n)); \ }) #else /* CONFIG_64BIT */ diff --git a/arch/s390/include/asm/elf.h b/arch/s390/include/asm/elf.h index 10c029cfcc7..64b61bf72e9 100644 --- a/arch/s390/include/asm/elf.h +++ b/arch/s390/include/asm/elf.h @@ -196,18 +196,6 @@ do { \ } while (0) #endif /* __s390x__ */ -/* - * An executable for which elf_read_implies_exec() returns TRUE will - * have the READ_IMPLIES_EXEC personality flag set automatically. - */ -#define elf_read_implies_exec(ex, executable_stack) \ -({ \ - if (current->mm->context.noexec && \ - executable_stack != EXSTACK_DISABLE_X) \ - disable_noexec(current->mm, current); \ - current->mm->context.noexec == 0; \ -}) - #define STACK_RND_MASK 0x7ffUL #define ARCH_DLINFO \ diff --git a/arch/s390/include/asm/hugetlb.h b/arch/s390/include/asm/hugetlb.h index b56403c2df2..799ed0f1643 100644 --- a/arch/s390/include/asm/hugetlb.h +++ b/arch/s390/include/asm/hugetlb.h @@ -111,21 +111,10 @@ static inline void huge_ptep_invalidate(struct mm_struct *mm, { pmd_t *pmdp = (pmd_t *) ptep; - if (!MACHINE_HAS_IDTE) { - __pmd_csp(pmdp); - if (mm->context.noexec) { - pmdp = get_shadow_table(pmdp); - __pmd_csp(pmdp); - } - return; - } - - __pmd_idte(address, pmdp); - if (mm->context.noexec) { - pmdp = get_shadow_table(pmdp); + if (MACHINE_HAS_IDTE) __pmd_idte(address, pmdp); - } - return; + else + __pmd_csp(pmdp); } #define huge_ptep_set_access_flags(__vma, __addr, __ptep, __entry, __dirty) \ diff --git a/arch/s390/include/asm/irq.h b/arch/s390/include/asm/irq.h index db14a311f1d..1544b90bd6d 100644 --- a/arch/s390/include/asm/irq.h +++ b/arch/s390/include/asm/irq.h @@ -15,6 +15,7 @@ enum interruption_class { EXTINT_VRT, EXTINT_SCP, EXTINT_IUC, + EXTINT_CPM, IOINT_QAI, IOINT_QDI, IOINT_DAS, diff --git a/arch/s390/include/asm/lowcore.h b/arch/s390/include/asm/lowcore.h index 65e172f8209..228cf0b295d 100644 --- a/arch/s390/include/asm/lowcore.h +++ b/arch/s390/include/asm/lowcore.h @@ -124,7 +124,7 @@ struct _lowcore { /* Address space pointer. */ __u32 kernel_asce; /* 0x02ac */ __u32 user_asce; /* 0x02b0 */ - __u32 user_exec_asce; /* 0x02b4 */ + __u32 current_pid; /* 0x02b4 */ /* SMP info area */ __u32 cpu_nr; /* 0x02b8 */ @@ -255,7 +255,7 @@ struct _lowcore { /* Address space pointer. */ __u64 kernel_asce; /* 0x0310 */ __u64 user_asce; /* 0x0318 */ - __u64 user_exec_asce; /* 0x0320 */ + __u64 current_pid; /* 0x0320 */ /* SMP info area */ __u32 cpu_nr; /* 0x0328 */ diff --git a/arch/s390/include/asm/mmu.h b/arch/s390/include/asm/mmu.h index 78522cdefdd..82d0847896a 100644 --- a/arch/s390/include/asm/mmu.h +++ b/arch/s390/include/asm/mmu.h @@ -5,19 +5,18 @@ typedef struct { atomic_t attach_count; unsigned int flush_mm; spinlock_t list_lock; - struct list_head crst_list; struct list_head pgtable_list; unsigned long asce_bits; unsigned long asce_limit; unsigned long vdso_base; - int noexec; - int has_pgste; /* The mmu context has extended page tables */ - int alloc_pgste; /* cloned contexts will have extended page tables */ + /* Cloned contexts will be created with extended page tables. */ + unsigned int alloc_pgste:1; + /* The mmu context has extended page tables. */ + unsigned int has_pgste:1; } mm_context_t; #define INIT_MM_CONTEXT(name) \ .context.list_lock = __SPIN_LOCK_UNLOCKED(name.context.list_lock), \ - .context.crst_list = LIST_HEAD_INIT(name.context.crst_list), \ .context.pgtable_list = LIST_HEAD_INIT(name.context.pgtable_list), #endif diff --git a/arch/s390/include/asm/mmu_context.h b/arch/s390/include/asm/mmu_context.h index 8c277caa8d3..5682f160ff8 100644 --- a/arch/s390/include/asm/mmu_context.h +++ b/arch/s390/include/asm/mmu_context.h @@ -35,11 +35,9 @@ static inline int init_new_context(struct task_struct *tsk, * and if has_pgste is set, it will create extended page * tables. */ - mm->context.noexec = 0; mm->context.has_pgste = 1; mm->context.alloc_pgste = 1; } else { - mm->context.noexec = (user_mode == SECONDARY_SPACE_MODE); mm->context.has_pgste = 0; mm->context.alloc_pgste = 0; } @@ -63,10 +61,8 @@ static inline void update_mm(struct mm_struct *mm, struct task_struct *tsk) S390_lowcore.user_asce = mm->context.asce_bits | __pa(pgd); if (user_mode != HOME_SPACE_MODE) { /* Load primary space page table origin. */ - pgd = mm->context.noexec ? get_shadow_table(pgd) : pgd; - S390_lowcore.user_exec_asce = mm->context.asce_bits | __pa(pgd); asm volatile(LCTL_OPCODE" 1,1,%0\n" - : : "m" (S390_lowcore.user_exec_asce) ); + : : "m" (S390_lowcore.user_asce) ); } else /* Load home space page table origin. */ asm volatile(LCTL_OPCODE" 13,13,%0" diff --git a/arch/s390/include/asm/page.h b/arch/s390/include/asm/page.h index 3c987e9ec8d..accb372ddc7 100644 --- a/arch/s390/include/asm/page.h +++ b/arch/s390/include/asm/page.h @@ -90,6 +90,7 @@ static inline void copy_page(void *to, void *from) */ typedef struct { unsigned long pgprot; } pgprot_t; +typedef struct { unsigned long pgste; } pgste_t; typedef struct { unsigned long pte; } pte_t; typedef struct { unsigned long pmd; } pmd_t; typedef struct { unsigned long pud; } pud_t; @@ -97,18 +98,21 @@ typedef struct { unsigned long pgd; } pgd_t; typedef pte_t *pgtable_t; #define pgprot_val(x) ((x).pgprot) +#define pgste_val(x) ((x).pgste) #define pte_val(x) ((x).pte) #define pmd_val(x) ((x).pmd) #define pud_val(x) ((x).pud) #define pgd_val(x) ((x).pgd) +#define __pgste(x) ((pgste_t) { (x) } ) #define __pte(x) ((pte_t) { (x) } ) #define __pmd(x) ((pmd_t) { (x) } ) +#define __pud(x) ((pud_t) { (x) } ) #define __pgd(x) ((pgd_t) { (x) } ) #define __pgprot(x) ((pgprot_t) { (x) } ) -static inline void -page_set_storage_key(unsigned long addr, unsigned int skey, int mapped) +static inline void page_set_storage_key(unsigned long addr, + unsigned char skey, int mapped) { if (!mapped) asm volatile(".insn rrf,0xb22b0000,%0,%1,8,0" @@ -117,15 +121,59 @@ page_set_storage_key(unsigned long addr, unsigned int skey, int mapped) asm volatile("sske %0,%1" : : "d" (skey), "a" (addr)); } -static inline unsigned int -page_get_storage_key(unsigned long addr) +static inline unsigned char page_get_storage_key(unsigned long addr) { - unsigned int skey; + unsigned char skey; - asm volatile("iske %0,%1" : "=d" (skey) : "a" (addr), "0" (0)); + asm volatile("iske %0,%1" : "=d" (skey) : "a" (addr)); return skey; } +static inline int page_reset_referenced(unsigned long addr) +{ + unsigned int ipm; + + asm volatile( + " rrbe 0,%1\n" + " ipm %0\n" + : "=d" (ipm) : "a" (addr) : "cc"); + return !!(ipm & 0x20000000); +} + +/* Bits int the storage key */ +#define _PAGE_CHANGED 0x02 /* HW changed bit */ +#define _PAGE_REFERENCED 0x04 /* HW referenced bit */ +#define _PAGE_FP_BIT 0x08 /* HW fetch protection bit */ +#define _PAGE_ACC_BITS 0xf0 /* HW access control bits */ + +/* + * Test and clear dirty bit in storage key. + * We can't clear the changed bit atomically. This is a potential + * race against modification of the referenced bit. This function + * should therefore only be called if it is not mapped in any + * address space. + */ +#define __HAVE_ARCH_PAGE_TEST_AND_CLEAR_DIRTY +static inline int page_test_and_clear_dirty(unsigned long pfn, int mapped) +{ + unsigned char skey; + + skey = page_get_storage_key(pfn << PAGE_SHIFT); + if (!(skey & _PAGE_CHANGED)) + return 0; + page_set_storage_key(pfn << PAGE_SHIFT, skey & ~_PAGE_CHANGED, mapped); + return 1; +} + +/* + * Test and clear referenced bit in storage key. + */ +#define __HAVE_ARCH_PAGE_TEST_AND_CLEAR_YOUNG +static inline int page_test_and_clear_young(unsigned long pfn) +{ + return page_reset_referenced(pfn << PAGE_SHIFT); +} + struct page; void arch_free_page(struct page *page, int order); void arch_alloc_page(struct page *page, int order); diff --git a/arch/s390/include/asm/percpu.h b/arch/s390/include/asm/percpu.h index f7ad8719d02..5325c89a584 100644 --- a/arch/s390/include/asm/percpu.h +++ b/arch/s390/include/asm/percpu.h @@ -1,6 +1,9 @@ #ifndef __ARCH_S390_PERCPU__ #define __ARCH_S390_PERCPU__ +#include <linux/preempt.h> +#include <asm/cmpxchg.h> + /* * s390 uses its own implementation for per cpu data, the offset of * the cpu local data area is cached in the cpu's lowcore memory. @@ -16,6 +19,71 @@ #define ARCH_NEEDS_WEAK_PER_CPU #endif +#define arch_irqsafe_cpu_to_op(pcp, val, op) \ +do { \ + typedef typeof(pcp) pcp_op_T__; \ + pcp_op_T__ old__, new__, prev__; \ + pcp_op_T__ *ptr__; \ + preempt_disable(); \ + ptr__ = __this_cpu_ptr(&(pcp)); \ + prev__ = *ptr__; \ + do { \ + old__ = prev__; \ + new__ = old__ op (val); \ + switch (sizeof(*ptr__)) { \ + case 8: \ + prev__ = cmpxchg64(ptr__, old__, new__); \ + break; \ + default: \ + prev__ = cmpxchg(ptr__, old__, new__); \ + } \ + } while (prev__ != old__); \ + preempt_enable(); \ +} while (0) + +#define irqsafe_cpu_add_1(pcp, val) arch_irqsafe_cpu_to_op(pcp, val, +) +#define irqsafe_cpu_add_2(pcp, val) arch_irqsafe_cpu_to_op(pcp, val, +) +#define irqsafe_cpu_add_4(pcp, val) arch_irqsafe_cpu_to_op(pcp, val, +) +#define irqsafe_cpu_add_8(pcp, val) arch_irqsafe_cpu_to_op(pcp, val, +) + +#define irqsafe_cpu_and_1(pcp, val) arch_irqsafe_cpu_to_op(pcp, val, &) +#define irqsafe_cpu_and_2(pcp, val) arch_irqsafe_cpu_to_op(pcp, val, &) +#define irqsafe_cpu_and_4(pcp, val) arch_irqsafe_cpu_to_op(pcp, val, &) +#define irqsafe_cpu_and_8(pcp, val) arch_irqsafe_cpu_to_op(pcp, val, &) + +#define irqsafe_cpu_or_1(pcp, val) arch_irqsafe_cpu_to_op(pcp, val, |) +#define irqsafe_cpu_or_2(pcp, val) arch_irqsafe_cpu_to_op(pcp, val, |) +#define irqsafe_cpu_or_4(pcp, val) arch_irqsafe_cpu_to_op(pcp, val, |) +#define irqsafe_cpu_or_8(pcp, val) arch_irqsafe_cpu_to_op(pcp, val, |) + +#define irqsafe_cpu_xor_1(pcp, val) arch_irqsafe_cpu_to_op(pcp, val, ^) +#define irqsafe_cpu_xor_2(pcp, val) arch_irqsafe_cpu_to_op(pcp, val, ^) +#define irqsafe_cpu_xor_4(pcp, val) arch_irqsafe_cpu_to_op(pcp, val, ^) +#define irqsafe_cpu_xor_8(pcp, val) arch_irqsafe_cpu_to_op(pcp, val, ^) + +#define arch_irqsafe_cpu_cmpxchg(pcp, oval, nval) \ +({ \ + typedef typeof(pcp) pcp_op_T__; \ + pcp_op_T__ ret__; \ + pcp_op_T__ *ptr__; \ + preempt_disable(); \ + ptr__ = __this_cpu_ptr(&(pcp)); \ + switch (sizeof(*ptr__)) { \ + case 8: \ + ret__ = cmpxchg64(ptr__, oval, nval); \ + break; \ + default: \ + ret__ = cmpxchg(ptr__, oval, nval); \ + } \ + preempt_enable(); \ + ret__; \ +}) + +#define irqsafe_cpu_cmpxchg_1(pcp, oval, nval) arch_irqsafe_cpu_cmpxchg(pcp, oval, nval) +#define irqsafe_cpu_cmpxchg_2(pcp, oval, nval) arch_irqsafe_cpu_cmpxchg(pcp, oval, nval) +#define irqsafe_cpu_cmpxchg_4(pcp, oval, nval) arch_irqsafe_cpu_cmpxchg(pcp, oval, nval) +#define irqsafe_cpu_cmpxchg_8(pcp, oval, nval) arch_irqsafe_cpu_cmpxchg(pcp, oval, nval) + #include <asm-generic/percpu.h> #endif /* __ARCH_S390_PERCPU__ */ diff --git a/arch/s390/include/asm/pgalloc.h b/arch/s390/include/asm/pgalloc.h index 082eb4e50e8..f6314af3b35 100644 --- a/arch/s390/include/asm/pgalloc.h +++ b/arch/s390/include/asm/pgalloc.h @@ -19,14 +19,13 @@ #define check_pgt_cache() do {} while (0) -unsigned long *crst_table_alloc(struct mm_struct *, int); +unsigned long *crst_table_alloc(struct mm_struct *); void crst_table_free(struct mm_struct *, unsigned long *); void crst_table_free_rcu(struct mm_struct *, unsigned long *); unsigned long *page_table_alloc(struct mm_struct *); void page_table_free(struct mm_struct *, unsigned long *); void page_table_free_rcu(struct mm_struct *, unsigned long *); -void disable_noexec(struct mm_struct *, struct task_struct *); static inline void clear_table(unsigned long *s, unsigned long val, size_t n) { @@ -50,9 +49,6 @@ static inline void clear_table(unsigned long *s, unsigned long val, size_t n) static inline void crst_table_init(unsigned long *crst, unsigned long entry) { clear_table(crst, entry, sizeof(unsigned long)*2048); - crst = get_shadow_table(crst); - if (crst) - clear_table(crst, entry, sizeof(unsigned long)*2048); } #ifndef __s390x__ @@ -69,10 +65,7 @@ static inline unsigned long pgd_entry_type(struct mm_struct *mm) #define pmd_free(mm, x) do { } while (0) #define pgd_populate(mm, pgd, pud) BUG() -#define pgd_populate_kernel(mm, pgd, pud) BUG() - #define pud_populate(mm, pud, pmd) BUG() -#define pud_populate_kernel(mm, pud, pmd) BUG() #else /* __s390x__ */ @@ -90,7 +83,7 @@ void crst_table_downgrade(struct mm_struct *, unsigned long limit); static inline pud_t *pud_alloc_one(struct mm_struct *mm, unsigned long address) { - unsigned long *table = crst_table_alloc(mm, mm->context.noexec); + unsigned long *table = crst_table_alloc(mm); if (table) crst_table_init(table, _REGION3_ENTRY_EMPTY); return (pud_t *) table; @@ -99,43 +92,21 @@ static inline pud_t *pud_alloc_one(struct mm_struct *mm, unsigned long address) static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long vmaddr) { - unsigned long *table = crst_table_alloc(mm, mm->context.noexec); + unsigned long *table = crst_table_alloc(mm); if (table) crst_table_init(table, _SEGMENT_ENTRY_EMPTY); return (pmd_t *) table; } #define pmd_free(mm, pmd) crst_table_free(mm, (unsigned long *) pmd) -static inline void pgd_populate_kernel(struct mm_struct *mm, - pgd_t *pgd, pud_t *pud) -{ - pgd_val(*pgd) = _REGION2_ENTRY | __pa(pud); -} - static inline void pgd_populate(struct mm_struct *mm, pgd_t *pgd, pud_t *pud) { - pgd_populate_kernel(mm, pgd, pud); - if (mm->context.noexec) { - pgd = get_shadow_table(pgd); - pud = get_shadow_table(pud); - pgd_populate_kernel(mm, pgd, pud); - } -} - -static inline void pud_populate_kernel(struct mm_struct *mm, - pud_t *pud, pmd_t *pmd) -{ - pud_val(*pud) = _REGION3_ENTRY | __pa(pmd); + pgd_val(*pgd) = _REGION2_ENTRY | __pa(pud); } static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd) { - pud_populate_kernel(mm, pud, pmd); - if (mm->context.noexec) { - pud = get_shadow_table(pud); - pmd = get_shadow_table(pmd); - pud_populate_kernel(mm, pud, pmd); - } + pud_val(*pud) = _REGION3_ENTRY | __pa(pmd); } #endif /* __s390x__ */ @@ -143,29 +114,19 @@ static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd) static inline pgd_t *pgd_alloc(struct mm_struct *mm) { spin_lock_init(&mm->context.list_lock); - INIT_LIST_HEAD(&mm->context.crst_list); INIT_LIST_HEAD(&mm->context.pgtable_list); - return (pgd_t *) - crst_table_alloc(mm, user_mode == SECONDARY_SPACE_MODE); + return (pgd_t *) crst_table_alloc(mm); } #define pgd_free(mm, pgd) crst_table_free(mm, (unsigned long *) pgd) -static inline void pmd_populate_kernel(struct mm_struct *mm, - pmd_t *pmd, pte_t *pte) -{ - pmd_val(*pmd) = _SEGMENT_ENTRY + __pa(pte); -} - static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, pgtable_t pte) { - pmd_populate_kernel(mm, pmd, pte); - if (mm->context.noexec) { - pmd = get_shadow_table(pmd); - pmd_populate_kernel(mm, pmd, pte + PTRS_PER_PTE); - } + pmd_val(*pmd) = _SEGMENT_ENTRY + __pa(pte); } +#define pmd_populate_kernel(mm, pmd, pte) pmd_populate(mm, pmd, pte) + #define pmd_pgtable(pmd) \ (pgtable_t)(pmd_val(pmd) & -sizeof(pte_t)*PTRS_PER_PTE) diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h index 02ace3491c5..c4773a2ef3d 100644 --- a/arch/s390/include/asm/pgtable.h +++ b/arch/s390/include/asm/pgtable.h @@ -31,9 +31,8 @@ #ifndef __ASSEMBLY__ #include <linux/sched.h> #include <linux/mm_types.h> -#include <asm/bitops.h> #include <asm/bug.h> -#include <asm/processor.h> +#include <asm/page.h> extern pgd_t swapper_pg_dir[] __attribute__ ((aligned (4096))); extern void paging_init(void); @@ -243,11 +242,13 @@ extern unsigned long VMALLOC_START; /* Software bits in the page table entry */ #define _PAGE_SWT 0x001 /* SW pte type bit t */ #define _PAGE_SWX 0x002 /* SW pte type bit x */ -#define _PAGE_SPECIAL 0x004 /* SW associated with special page */ +#define _PAGE_SWC 0x004 /* SW pte changed bit (for KVM) */ +#define _PAGE_SWR 0x008 /* SW pte referenced bit (for KVM) */ +#define _PAGE_SPECIAL 0x010 /* SW associated with special page */ #define __HAVE_ARCH_PTE_SPECIAL /* Set of bits not changed in pte_modify */ -#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_SPECIAL) +#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_SPECIAL | _PAGE_SWC | _PAGE_SWR) /* Six different types of pages. */ #define _PAGE_TYPE_EMPTY 0x400 @@ -256,8 +257,6 @@ extern unsigned long VMALLOC_START; #define _PAGE_TYPE_FILE 0x601 /* bit 0x002 is used for offset !! */ #define _PAGE_TYPE_RO 0x200 #define _PAGE_TYPE_RW 0x000 -#define _PAGE_TYPE_EX_RO 0x202 -#define _PAGE_TYPE_EX_RW 0x002 /* * Only four types for huge pages, using the invalid bit and protection bit @@ -287,8 +286,6 @@ extern unsigned long VMALLOC_START; * _PAGE_TYPE_FILE 11?1 -> 11?1 * _PAGE_TYPE_RO 0100 -> 1100 * _PAGE_TYPE_RW 0000 -> 1000 - * _PAGE_TYPE_EX_RO 0110 -> 1110 - * _PAGE_TYPE_EX_RW 0010 -> 1010 * * pte_none is true for bits combinations 1000, 1010, 1100, 1110 * pte_present is true for bits combinations 0000, 0010, 0100, 0110, 1001 @@ -297,14 +294,17 @@ extern unsigned long VMALLOC_START; */ /* Page status table bits for virtualization */ -#define RCP_PCL_BIT 55 -#define RCP_HR_BIT 54 -#define RCP_HC_BIT 53 -#define RCP_GR_BIT 50 -#define RCP_GC_BIT 49 - -/* User dirty bit for KVM's migration feature */ -#define KVM_UD_BIT 47 +#define RCP_ACC_BITS 0xf000000000000000UL +#define RCP_FP_BIT 0x0800000000000000UL +#define RCP_PCL_BIT 0x0080000000000000UL +#define RCP_HR_BIT 0x0040000000000000UL +#define RCP_HC_BIT 0x0020000000000000UL +#define RCP_GR_BIT 0x0004000000000000UL +#define RCP_GC_BIT 0x0002000000000000UL + +/* User dirty / referenced bit for KVM's migration feature */ +#define KVM_UR_BIT 0x0000800000000000UL +#define KVM_UC_BIT 0x0000400000000000UL #ifndef __s390x__ @@ -377,85 +377,54 @@ extern unsigned long VMALLOC_START; #define _ASCE_USER_BITS (_ASCE_SPACE_SWITCH | _ASCE_PRIVATE_SPACE | \ _ASCE_ALT_EVENT) -/* Bits int the storage key */ -#define _PAGE_CHANGED 0x02 /* HW changed bit */ -#define _PAGE_REFERENCED 0x04 /* HW referenced bit */ - /* * Page protection definitions. */ #define PAGE_NONE __pgprot(_PAGE_TYPE_NONE) #define PAGE_RO __pgprot(_PAGE_TYPE_RO) #define PAGE_RW __pgprot(_PAGE_TYPE_RW) -#define PAGE_EX_RO __pgprot(_PAGE_TYPE_EX_RO) -#define PAGE_EX_RW __pgprot(_PAGE_TYPE_EX_RW) #define PAGE_KERNEL PAGE_RW #define PAGE_COPY PAGE_RO /* - * Dependent on the EXEC_PROTECT option s390 can do execute protection. - * Write permission always implies read permission. In theory with a - * primary/secondary page table execute only can be implemented but - * it would cost an additional bit in the pte to distinguish all the - * different pte types. To avoid that execute permission currently - * implies read permission as well. + * On s390 the page table entry has an invalid bit and a read-only bit. + * Read permission implies execute permission and write permission + * implies read permission. */ /*xwr*/ #define __P000 PAGE_NONE #define __P001 PAGE_RO #define __P010 PAGE_RO #define __P011 PAGE_RO -#define __P100 PAGE_EX_RO -#define __P101 PAGE_EX_RO -#define __P110 PAGE_EX_RO -#define __P111 PAGE_EX_RO +#define __P100 PAGE_RO +#define __P101 PAGE_RO +#define __P110 PAGE_RO +#define __P111 PAGE_RO #define __S000 PAGE_NONE #define __S001 PAGE_RO #define __S010 PAGE_RW #define __S011 PAGE_RW -#define __S100 PAGE_EX_RO -#define __S101 PAGE_EX_RO -#define __S110 PAGE_EX_RW -#define __S111 PAGE_EX_RW - -#ifndef __s390x__ -# define PxD_SHADOW_SHIFT 1 -#else /* __s390x__ */ -# define PxD_SHADOW_SHIFT 2 -#endif /* __s390x__ */ +#define __S100 PAGE_RO +#define __S101 PAGE_RO +#define __S110 PAGE_RW +#define __S111 PAGE_RW -static inline void *get_shadow_table(void *table) +static inline int mm_exclusive(struct mm_struct *mm) { - unsigned long addr, offset; - struct page *page; - - addr = (unsigned long) table; - offset = addr & ((PAGE_SIZE << PxD_SHADOW_SHIFT) - 1); - page = virt_to_page((void *)(addr ^ offset)); - return (void *)(addr_t)(page->index ? (page->index | offset) : 0UL); + return likely(mm == current->active_mm && + atomic_read(&mm->context.attach_count) <= 1); } -/* - * Certain architectures need to do special things when PTEs - * within a page table are directly modified. Thus, the following - * hook is made available. - */ -static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, - pte_t *ptep, pte_t entry) +static inline int mm_has_pgste(struct mm_struct *mm) { - *ptep = entry; - if (mm->context.noexec) { - if (!(pte_val(entry) & _PAGE_INVALID) && - (pte_val(entry) & _PAGE_SWX)) - pte_val(entry) |= _PAGE_RO; - else - pte_val(entry) = _PAGE_TYPE_EMPTY; - ptep[PTRS_PER_PTE] = entry; - } +#ifdef CONFIG_PGSTE + if (unlikely(mm->context.has_pgste)) + return 1; +#endif + return 0; } - /* * pgd/pmd/pte query functions */ @@ -568,52 +537,127 @@ static inline int pte_special(pte_t pte) } #define __HAVE_ARCH_PTE_SAME -#define pte_same(a,b) (pte_val(a) == pte_val(b)) +static inline int pte_same(pte_t a, pte_t b) +{ + return pte_val(a) == pte_val(b); +} -static inline void rcp_lock(pte_t *ptep) +static inline pgste_t pgste_get_lock(pte_t *ptep) { + unsigned long new = 0; #ifdef CONFIG_PGSTE - unsigned long *pgste = (unsigned long *) (ptep + PTRS_PER_PTE); + unsigned long old; + preempt_disable(); - while (test_and_set_bit(RCP_PCL_BIT, pgste)) - ; + asm( + " lg %0,%2\n" + "0: lgr %1,%0\n" + " nihh %0,0xff7f\n" /* clear RCP_PCL_BIT in old */ + " oihh %1,0x0080\n" /* set RCP_PCL_BIT in new */ + " csg %0,%1,%2\n" + " jl 0b\n" + : "=&d" (old), "=&d" (new), "=Q" (ptep[PTRS_PER_PTE]) + : "Q" (ptep[PTRS_PER_PTE]) : "cc"); #endif + return __pgste(new); } -static inline void rcp_unlock(pte_t *ptep) +static inline void pgste_set_unlock(pte_t *ptep, pgste_t pgste) { #ifdef CONFIG_PGSTE - unsigned long *pgste = (unsigned long *) (ptep + PTRS_PER_PTE); - clear_bit(RCP_PCL_BIT, pgste); + asm( + " nihh %1,0xff7f\n" /* clear RCP_PCL_BIT */ + " stg %1,%0\n" + : "=Q" (ptep[PTRS_PER_PTE]) + : "d" (pgste_val(pgste)), "Q" (ptep[PTRS_PER_PTE]) : "cc"); preempt_enable(); #endif } -/* forward declaration for SetPageUptodate in page-flags.h*/ -static inline void page_clear_dirty(struct page *page, int mapped); -#include <linux/page-flags.h> - -static inline void ptep_rcp_copy(pte_t *ptep) +static inline pgste_t pgste_update_all(pte_t *ptep, pgste_t pgste) { #ifdef CONFIG_PGSTE - struct page *page = virt_to_page(pte_val(*ptep)); - unsigned int skey; - unsigned long *pgste = (unsigned long *) (ptep + PTRS_PER_PTE); - - skey = page_get_storage_key(page_to_phys(page)); - if (skey & _PAGE_CHANGED) { - set_bit_simple(RCP_GC_BIT, pgste); - set_bit_simple(KVM_UD_BIT, pgste); + unsigned long pfn, bits; + unsigned char skey; + + pfn = pte_val(*ptep) >> PAGE_SHIFT; + skey = page_get_storage_key(pfn); + bits = skey & (_PAGE_CHANGED | _PAGE_REFERENCED); + /* Clear page changed & referenced bit in the storage key */ + if (bits) { + skey ^= bits; + page_set_storage_key(pfn, skey, 1); } - if (skey & _PAGE_REFERENCED) - set_bit_simple(RCP_GR_BIT, pgste); - if (test_and_clear_bit_simple(RCP_HC_BIT, pgste)) { - SetPageDirty(page); - set_bit_simple(KVM_UD_BIT, pgste); - } - if (test_and_clear_bit_simple(RCP_HR_BIT, pgste)) - SetPageReferenced(page); + /* Transfer page changed & referenced bit to guest bits in pgste */ + pgste_val(pgste) |= bits << 48; /* RCP_GR_BIT & RCP_GC_BIT */ + /* Get host changed & referenced bits from pgste */ + bits |= (pgste_val(pgste) & (RCP_HR_BIT | RCP_HC_BIT)) >> 52; + /* Clear host bits in pgste. */ + pgste_val(pgste) &= ~(RCP_HR_BIT | RCP_HC_BIT); + pgste_val(pgste) &= ~(RCP_ACC_BITS | RCP_FP_BIT); + /* Copy page access key and fetch protection bit to pgste */ + pgste_val(pgste) |= + (unsigned long) (skey & (_PAGE_ACC_BITS | _PAGE_FP_BIT)) << 56; + /* Transfer changed and referenced to kvm user bits */ + pgste_val(pgste) |= bits << 45; /* KVM_UR_BIT & KVM_UC_BIT */ + /* Transfer changed & referenced to pte sofware bits */ + pte_val(*ptep) |= bits << 1; /* _PAGE_SWR & _PAGE_SWC */ #endif + return pgste; + +} + +static inline pgste_t pgste_update_young(pte_t *ptep, pgste_t pgste) +{ +#ifdef CONFIG_PGSTE + int young; + + young = page_reset_referenced(pte_val(*ptep) & PAGE_MASK); + /* Transfer page referenced bit to pte software bit (host view) */ + if (young || (pgste_val(pgste) & RCP_HR_BIT)) + pte_val(*ptep) |= _PAGE_SWR; + /* Clear host referenced bit in pgste. */ + pgste_val(pgste) &= ~RCP_HR_BIT; + /* Transfer page referenced bit to guest bit in pgste */ + pgste_val(pgste) |= (unsigned long) young << 50; /* set RCP_GR_BIT */ +#endif + return pgste; + +} + +static inline void pgste_set_pte(pte_t *ptep, pgste_t pgste) +{ +#ifdef CONFIG_PGSTE + unsigned long pfn; + unsigned long okey, nkey; + + pfn = pte_val(*ptep) >> PAGE_SHIFT; + okey = nkey = page_get_storage_key(pfn); + nkey &= ~(_PAGE_ACC_BITS | _PAGE_FP_BIT); + /* Set page access key and fetch protection bit from pgste */ + nkey |= (pgste_val(pgste) & (RCP_ACC_BITS | RCP_FP_BIT)) >> 56; + if (okey != nkey) + page_set_storage_key(pfn, nkey, 1); +#endif +} + +/* + * Certain architectures need to do special things when PTEs + * within a page table are directly modified. Thus, the following + * hook is made available. + */ +static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, + pte_t *ptep, pte_t entry) +{ + pgste_t pgste; + + if (mm_has_pgste(mm)) { + pgste = pgste_get_lock(ptep); + pgste_set_pte(ptep, pgste); + *ptep = entry; + pgste_set_unlock(ptep, pgste); + } else + *ptep = entry; } /* @@ -627,19 +671,19 @@ static inline int pte_write(pte_t pte) static inline int pte_dirty(pte_t pte) { - /* A pte is neither clean nor dirty on s/390. The dirty bit - * is in the storage key. See page_test_and_clear_dirty for - * details. - */ +#ifdef CONFIG_PGSTE + if (pte_val(pte) & _PAGE_SWC) + return 1; +#endif return 0; } static inline int pte_young(pte_t pte) { - /* A pte is neither young nor old on s/390. The young bit - * is in the storage key. See page_test_and_clear_young for - * details. - */ +#ifdef CONFIG_PGSTE + if (pte_val(pte) & _PAGE_SWR) + return 1; +#endif return 0; } @@ -647,64 +691,30 @@ static inline int pte_young(pte_t pte) * pgd/pmd/pte modification functions */ -#ifndef __s390x__ - -#define pgd_clear(pgd) do { } while (0) -#define pud_clear(pud) do { } while (0) - -#else /* __s390x__ */ - -static inline void pgd_clear_kernel(pgd_t * pgd) +static inline void pgd_clear(pgd_t *pgd) { +#ifdef __s390x__ if ((pgd_val(*pgd) & _REGION_ENTRY_TYPE_MASK) == _REGION_ENTRY_TYPE_R2) pgd_val(*pgd) = _REGION2_ENTRY_EMPTY; +#endif } -static inline void pgd_clear(pgd_t * pgd) -{ - pgd_t *shadow = get_shadow_table(pgd); - - pgd_clear_kernel(pgd); - if (shadow) - pgd_clear_kernel(shadow); -} - -static inline void pud_clear_kernel(pud_t *pud) +static inline void pud_clear(pud_t *pud) { +#ifdef __s390x__ if ((pud_val(*pud) & _REGION_ENTRY_TYPE_MASK) == _REGION_ENTRY_TYPE_R3) pud_val(*pud) = _REGION3_ENTRY_EMPTY; +#endif } -static inline void pud_clear(pud_t *pud) -{ - pud_t *shadow = get_shadow_table(pud); - - pud_clear_kernel(pud); - if (shadow) - pud_clear_kernel(shadow); -} - -#endif /* __s390x__ */ - -static inline void pmd_clear_kernel(pmd_t * pmdp) +static inline void pmd_clear(pmd_t *pmdp) { pmd_val(*pmdp) = _SEGMENT_ENTRY_EMPTY; } -static inline void pmd_clear(pmd_t *pmd) -{ - pmd_t *shadow = get_shadow_table(pmd); - - pmd_clear_kernel(pmd); - if (shadow) - pmd_clear_kernel(shadow); -} - static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) { pte_val(*ptep) = _PAGE_TYPE_EMPTY; - if (mm->context.noexec) - pte_val(ptep[PTRS_PER_PTE]) = _PAGE_TYPE_EMPTY; } /* @@ -734,35 +744,27 @@ static inline pte_t pte_mkwrite(pte_t pte) static inline pte_t pte_mkclean(pte_t pte) { - /* The only user of pte_mkclean is the fork() code. - We must *not* clear the *physical* page dirty bit - just because fork() wants to clear the dirty bit in - *one* of the page's mappings. So we just do nothing. */ +#ifdef CONFIG_PGSTE + pte_val(pte) &= ~_PAGE_SWC; +#endif return pte; } static inline pte_t pte_mkdirty(pte_t pte) { - /* We do not explicitly set the dirty bit because the - * sske instruction is slow. It is faster to let the - * next instruction set the dirty bit. - */ return pte; } static inline pte_t pte_mkold(pte_t pte) { - /* S/390 doesn't keep its dirty/referenced bit in the pte. - * There is no point in clearing the real referenced bit. - */ +#ifdef CONFIG_PGSTE + pte_val(pte) &= ~_PAGE_SWR; +#endif return pte; } static inline pte_t pte_mkyoung(pte_t pte) { - /* S/390 doesn't keep its dirty/referenced bit in the pte. - * There is no point in setting the real referenced bit. - */ return pte; } @@ -800,62 +802,60 @@ static inline pte_t pte_mkhuge(pte_t pte) } #endif -#ifdef CONFIG_PGSTE /* - * Get (and clear) the user dirty bit for a PTE. + * Get (and clear) the user dirty bit for a pte. */ -static inline int kvm_s390_test_and_clear_page_dirty(struct mm_struct *mm, - pte_t *ptep) +static inline int ptep_test_and_clear_user_dirty(struct mm_struct *mm, + pte_t *ptep) { - int dirty; - unsigned long *pgste; - struct page *page; - unsigned int skey; - - if (!mm->context.has_pgste) - return -EINVAL; - rcp_lock(ptep); - pgste = (unsigned long *) (ptep + PTRS_PER_PTE); - page = virt_to_page(pte_val(*ptep)); - skey = page_get_storage_key(page_to_phys(page)); - if (skey & _PAGE_CHANGED) { - set_bit_simple(RCP_GC_BIT, pgste); - set_bit_simple(KVM_UD_BIT, pgste); + pgste_t pgste; + int dirty = 0; + + if (mm_has_pgste(mm)) { + pgste = pgste_get_lock(ptep); + pgste = pgste_update_all(ptep, pgste); + dirty = !!(pgste_val(pgste) & KVM_UC_BIT); + pgste_val(pgste) &= ~KVM_UC_BIT; + pgste_set_unlock(ptep, pgste); + return dirty; } - if (test_and_clear_bit_simple(RCP_HC_BIT, pgste)) { - SetPageDirty(page); - set_bit_simple(KVM_UD_BIT, pgste); - } - dirty = test_and_clear_bit_simple(KVM_UD_BIT, pgste); - if (skey & _PAGE_CHANGED) - page_clear_dirty(page, 1); - rcp_unlock(ptep); return dirty; } -#endif + +/* + * Get (and clear) the user referenced bit for a pte. + */ +static inline int ptep_test_and_clear_user_young(struct mm_struct *mm, + pte_t *ptep) +{ + pgste_t pgste; + int young = 0; + + if (mm_has_pgste(mm)) { + pgste = pgste_get_lock(ptep); + pgste = pgste_update_young(ptep, pgste); + young = !!(pgste_val(pgste) & KVM_UR_BIT); + pgste_val(pgste) &= ~KVM_UR_BIT; + pgste_set_unlock(ptep, pgste); + } + return young; +} #define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG static inline int ptep_test_and_clear_young(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep) { -#ifdef CONFIG_PGSTE - unsigned long physpage; - int young; - unsigned long *pgste; + pgste_t pgste; + pte_t pte; - if (!vma->vm_mm->context.has_pgste) - return 0; - physpage = pte_val(*ptep) & PAGE_MASK; - pgste = (unsigned long *) (ptep + PTRS_PER_PTE); - - young = ((page_get_storage_key(physpage) & _PAGE_REFERENCED) != 0); - rcp_lock(ptep); - if (young) - set_bit_simple(RCP_GR_BIT, pgste); - young |= test_and_clear_bit_simple(RCP_HR_BIT, pgste); - rcp_unlock(ptep); - return young; -#endif + if (mm_has_pgste(vma->vm_mm)) { + pgste = pgste_get_lock(ptep); + pgste = pgste_update_young(ptep, pgste); + pte = *ptep; + *ptep = pte_mkold(pte); + pgste_set_unlock(ptep, pgste); + return pte_young(pte); + } return 0; } @@ -867,10 +867,7 @@ static inline int ptep_clear_flush_young(struct vm_area_struct *vma, * On s390 reference bits are in storage key and never in TLB * With virtualization we handle the reference bit, without we * we can simply return */ -#ifdef CONFIG_PGSTE return ptep_test_and_clear_young(vma, address, ptep); -#endif - return 0; } static inline void __ptep_ipte(unsigned long address, pte_t *ptep) @@ -890,25 +887,6 @@ static inline void __ptep_ipte(unsigned long address, pte_t *ptep) } } -static inline void ptep_invalidate(struct mm_struct *mm, - unsigned long address, pte_t *ptep) -{ - if (mm->context.has_pgste) { - rcp_lock(ptep); - __ptep_ipte(address, ptep); - ptep_rcp_copy(ptep); - pte_val(*ptep) = _PAGE_TYPE_EMPTY; - rcp_unlock(ptep); - return; - } - __ptep_ipte(address, ptep); - pte_val(*ptep) = _PAGE_TYPE_EMPTY; - if (mm->context.noexec) { - __ptep_ipte(address, ptep + PTRS_PER_PTE); - pte_val(*(ptep + PTRS_PER_PTE)) = _PAGE_TYPE_EMPTY; - } -} - /* * This is hard to understand. ptep_get_and_clear and ptep_clear_flush * both clear the TLB for the unmapped pte. The reason is that @@ -923,24 +901,72 @@ static inline void ptep_invalidate(struct mm_struct *mm, * is a nop. */ #define __HAVE_ARCH_PTEP_GET_AND_CLEAR -#define ptep_get_and_clear(__mm, __address, __ptep) \ -({ \ - pte_t __pte = *(__ptep); \ - (__mm)->context.flush_mm = 1; \ - if (atomic_read(&(__mm)->context.attach_count) > 1 || \ - (__mm) != current->active_mm) \ - ptep_invalidate(__mm, __address, __ptep); \ - else \ - pte_clear((__mm), (__address), (__ptep)); \ - __pte; \ -}) +static inline pte_t ptep_get_and_clear(struct mm_struct *mm, + unsigned long address, pte_t *ptep) +{ + pgste_t pgste; + pte_t pte; + + mm->context.flush_mm = 1; + if (mm_has_pgste(mm)) + pgste = pgste_get_lock(ptep); + + pte = *ptep; + if (!mm_exclusive(mm)) + __ptep_ipte(address, ptep); + pte_val(*ptep) = _PAGE_TYPE_EMPTY; + + if (mm_has_pgste(mm)) { + pgste = pgste_update_all(&pte, pgste); + pgste_set_unlock(ptep, pgste); + } + return pte; +} + +#define __HAVE_ARCH_PTEP_MODIFY_PROT_TRANSACTION +static inline pte_t ptep_modify_prot_start(struct mm_struct *mm, + unsigned long address, + pte_t *ptep) +{ + pte_t pte; + + mm->context.flush_mm = 1; + if (mm_has_pgste(mm)) + pgste_get_lock(ptep); + + pte = *ptep; + if (!mm_exclusive(mm)) + __ptep_ipte(address, ptep); + return pte; +} + +static inline void ptep_modify_prot_commit(struct mm_struct *mm, + unsigned long address, + pte_t *ptep, pte_t pte) +{ + *ptep = pte; + if (mm_has_pgste(mm)) + pgste_set_unlock(ptep, *(pgste_t *)(ptep + PTRS_PER_PTE)); +} #define __HAVE_ARCH_PTEP_CLEAR_FLUSH static inline pte_t ptep_clear_flush(struct vm_area_struct *vma, unsigned long address, pte_t *ptep) { - pte_t pte = *ptep; - ptep_invalidate(vma->vm_mm, address, ptep); + pgste_t pgste; + pte_t pte; + + if (mm_has_pgste(vma->vm_mm)) + pgste = pgste_get_lock(ptep); + + pte = *ptep; + __ptep_ipte(address, ptep); + pte_val(*ptep) = _PAGE_TYPE_EMPTY; + + if (mm_has_pgste(vma->vm_mm)) { + pgste = pgste_update_all(&pte, pgste); + pgste_set_unlock(ptep, pgste); + } return pte; } @@ -953,76 +979,67 @@ static inline pte_t ptep_clear_flush(struct vm_area_struct *vma, */ #define __HAVE_ARCH_PTEP_GET_AND_CLEAR_FULL static inline pte_t ptep_get_and_clear_full(struct mm_struct *mm, - unsigned long addr, + unsigned long address, pte_t *ptep, int full) { - pte_t pte = *ptep; + pgste_t pgste; + pte_t pte; + + if (mm_has_pgste(mm)) + pgste = pgste_get_lock(ptep); + + pte = *ptep; + if (!full) + __ptep_ipte(address, ptep); + pte_val(*ptep) = _PAGE_TYPE_EMPTY; - if (full) - pte_clear(mm, addr, ptep); - else - ptep_invalidate(mm, addr, ptep); + if (mm_has_pgste(mm)) { + pgste = pgste_update_all(&pte, pgste); + pgste_set_unlock(ptep, pgste); + } return pte; } #define __HAVE_ARCH_PTEP_SET_WRPROTECT -#define ptep_set_wrprotect(__mm, __addr, __ptep) \ -({ \ - pte_t __pte = *(__ptep); \ - if (pte_write(__pte)) { \ - (__mm)->context.flush_mm = 1; \ - if (atomic_read(&(__mm)->context.attach_count) > 1 || \ - (__mm) != current->active_mm) \ - ptep_invalidate(__mm, __addr, __ptep); \ - set_pte_at(__mm, __addr, __ptep, pte_wrprotect(__pte)); \ - } \ -}) +static inline pte_t ptep_set_wrprotect(struct mm_struct *mm, + unsigned long address, pte_t *ptep) +{ + pgste_t pgste; + pte_t pte = *ptep; -#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS -#define ptep_set_access_flags(__vma, __addr, __ptep, __entry, __dirty) \ -({ \ - int __changed = !pte_same(*(__ptep), __entry); \ - if (__changed) { \ - ptep_invalidate((__vma)->vm_mm, __addr, __ptep); \ - set_pte_at((__vma)->vm_mm, __addr, __ptep, __entry); \ - } \ - __changed; \ -}) + if (pte_write(pte)) { + mm->context.flush_mm = 1; + if (mm_has_pgste(mm)) + pgste = pgste_get_lock(ptep); -/* - * Test and clear dirty bit in storage key. - * We can't clear the changed bit atomically. This is a potential - * race against modification of the referenced bit. This function - * should therefore only be called if it is not mapped in any - * address space. - */ -#define __HAVE_ARCH_PAGE_TEST_DIRTY -static inline int page_test_dirty(struct page *page) -{ - return (page_get_storage_key(page_to_phys(page)) & _PAGE_CHANGED) != 0; -} + if (!mm_exclusive(mm)) + __ptep_ipte(address, ptep); + *ptep = pte_wrprotect(pte); -#define __HAVE_ARCH_PAGE_CLEAR_DIRTY -static inline void page_clear_dirty(struct page *page, int mapped) -{ - page_set_storage_key(page_to_phys(page), PAGE_DEFAULT_KEY, mapped); + if (mm_has_pgste(mm)) + pgste_set_unlock(ptep, pgste); + } + return pte; } -/* - * Test and clear referenced bit in storage key. - */ -#define __HAVE_ARCH_PAGE_TEST_AND_CLEAR_YOUNG -static inline int page_test_and_clear_young(struct page *page) +#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS +static inline int ptep_set_access_flags(struct vm_area_struct *vma, + unsigned long address, pte_t *ptep, + pte_t entry, int dirty) { - unsigned long physpage = page_to_phys(page); - int ccode; - - asm volatile( - " rrbe 0,%1\n" - " ipm %0\n" - " srl %0,28\n" - : "=d" (ccode) : "a" (physpage) : "cc" ); - return ccode & 2; + pgste_t pgste; + + if (pte_same(*ptep, entry)) + return 0; + if (mm_has_pgste(vma->vm_mm)) + pgste = pgste_get_lock(ptep); + + __ptep_ipte(address, ptep); + *ptep = entry; + + if (mm_has_pgste(vma->vm_mm)) + pgste_set_unlock(ptep, pgste); + return 1; } /* diff --git a/arch/s390/include/asm/processor.h b/arch/s390/include/asm/processor.h index 2c79b641627..1300c302533 100644 --- a/arch/s390/include/asm/processor.h +++ b/arch/s390/include/asm/processor.h @@ -84,6 +84,7 @@ struct thread_struct { struct per_event per_event; /* Cause of the last PER trap */ /* pfault_wait is used to block the process on a pfault event */ unsigned long pfault_wait; + struct list_head list; }; typedef struct thread_struct thread_struct; diff --git a/arch/s390/include/asm/tlbflush.h b/arch/s390/include/asm/tlbflush.h index 29d5d6d4bec..b7a4f2eb005 100644 --- a/arch/s390/include/asm/tlbflush.h +++ b/arch/s390/include/asm/tlbflush.h @@ -50,7 +50,7 @@ static inline void __tlb_flush_full(struct mm_struct *mm) /* * If the process only ran on the local cpu, do a local flush. */ - local_cpumask = cpumask_of_cpu(smp_processor_id()); + cpumask_copy(&local_cpumask, cpumask_of(smp_processor_id())); if (cpumask_equal(mm_cpumask(mm), &local_cpumask)) __tlb_flush_local(); else @@ -80,16 +80,11 @@ static inline void __tlb_flush_mm(struct mm_struct * mm) * on all cpus instead of doing a local flush if the mm * only ran on the local cpu. */ - if (MACHINE_HAS_IDTE) { - if (mm->context.noexec) - __tlb_flush_idte((unsigned long) - get_shadow_table(mm->pgd) | - mm->context.asce_bits); + if (MACHINE_HAS_IDTE) __tlb_flush_idte((unsigned long) mm->pgd | mm->context.asce_bits); - return; - } - __tlb_flush_full(mm); + else + __tlb_flush_full(mm); } static inline void __tlb_flush_mm_cond(struct mm_struct * mm) diff --git a/arch/s390/include/asm/unistd.h b/arch/s390/include/asm/unistd.h index e8215257237..9208e69245a 100644 --- a/arch/s390/include/asm/unistd.h +++ b/arch/s390/include/asm/unistd.h @@ -385,6 +385,7 @@ /* Ignore system calls that are also reachable via sys_socket */ #define __IGNORE_recvmmsg +#define __IGNORE_sendmmsg #define __ARCH_WANT_IPC_PARSE_VERSION #define __ARCH_WANT_OLD_READDIR diff --git a/arch/s390/kernel/asm-offsets.c b/arch/s390/kernel/asm-offsets.c index fe03c140002..edfbd17d708 100644 --- a/arch/s390/kernel/asm-offsets.c +++ b/arch/s390/kernel/asm-offsets.c @@ -124,13 +124,11 @@ int main(void) DEFINE(__LC_LAST_UPDATE_TIMER, offsetof(struct _lowcore, last_update_timer)); DEFINE(__LC_LAST_UPDATE_CLOCK, offsetof(struct _lowcore, last_update_clock)); DEFINE(__LC_CURRENT, offsetof(struct _lowcore, current_task)); + DEFINE(__LC_CURRENT_PID, offsetof(struct _lowcore, current_pid)); DEFINE(__LC_THREAD_INFO, offsetof(struct _lowcore, thread_info)); DEFINE(__LC_KERNEL_STACK, offsetof(struct _lowcore, kernel_stack)); DEFINE(__LC_ASYNC_STACK, offsetof(struct _lowcore, async_stack)); DEFINE(__LC_PANIC_STACK, offsetof(struct _lowcore, panic_stack)); - DEFINE(__LC_KERNEL_ASCE, offsetof(struct _lowcore, kernel_asce)); - DEFINE(__LC_USER_ASCE, offsetof(struct _lowcore, user_asce)); - DEFINE(__LC_USER_EXEC_ASCE, offsetof(struct _lowcore, user_exec_asce)); DEFINE(__LC_INT_CLOCK, offsetof(struct _lowcore, int_clock)); DEFINE(__LC_MCCK_CLOCK, offsetof(struct _lowcore, mcck_clock)); DEFINE(__LC_MACHINE_FLAGS, offsetof(struct _lowcore, machine_flags)); diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S index 1b67fc6ebdc..0476174dfff 100644 --- a/arch/s390/kernel/entry.S +++ b/arch/s390/kernel/entry.S @@ -212,6 +212,7 @@ __switch_to: lctl %c4,%c4,__TASK_pid(%r3) # load pid to control reg. 4 lm %r6,%r15,__SF_GPRS(%r15) # load gprs of next task st %r3,__LC_CURRENT # store task struct of next + mvc __LC_CURRENT_PID(4,%r0),__TASK_pid(%r3) # store pid of next st %r5,__LC_THREAD_INFO # store thread info of next ahi %r5,STACK_SIZE # end of kernel stack of next st %r5,__LC_KERNEL_STACK # store end of kernel stack diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S index 9fd86456349..d61967e2eab 100644 --- a/arch/s390/kernel/entry64.S +++ b/arch/s390/kernel/entry64.S @@ -220,6 +220,7 @@ __switch_to: lctl %c4,%c4,__TASK_pid(%r3) # load pid to control reg. 4 lmg %r6,%r15,__SF_GPRS(%r15) # load gprs of next task stg %r3,__LC_CURRENT # store task struct of next + mvc __LC_CURRENT_PID+4(4,%r0),__TASK_pid(%r3) # store pid of next stg %r5,__LC_THREAD_INFO # store thread info of next aghi %r5,STACK_SIZE # end of kernel stack of next stg %r5,__LC_KERNEL_STACK # store end of kernel stack diff --git a/arch/s390/kernel/irq.c b/arch/s390/kernel/irq.c index ea5099c9709..e204f9597aa 100644 --- a/arch/s390/kernel/irq.c +++ b/arch/s390/kernel/irq.c @@ -32,6 +32,7 @@ static const struct irq_class intrclass_names[] = { {.name = "VRT", .desc = "[EXT] Virtio" }, {.name = "SCP", .desc = "[EXT] Service Call" }, {.name = "IUC", .desc = "[EXT] IUCV" }, + {.name = "CPM", .desc = "[EXT] CPU Measurement" }, {.name = "QAI", .desc = "[I/O] QDIO Adapter Interrupt" }, {.name = "QDI", .desc = "[I/O] QDIO Interrupt" }, {.name = "DAS", .desc = "[I/O] DASD" }, diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c index a895e69379f..541a7509fae 100644 --- a/arch/s390/kernel/process.c +++ b/arch/s390/kernel/process.c @@ -9,41 +9,26 @@ #include <linux/compiler.h> #include <linux/cpu.h> -#include <linux/errno.h> #include <linux/sched.h> #include <linux/kernel.h> #include <linux/mm.h> -#include <linux/fs.h> #include <linux/smp.h> -#include <linux/stddef.h> #include <linux/slab.h> -#include <linux/unistd.h> -#include <linux/ptrace.h> -#include <linux/vmalloc.h> -#include <linux/user.h> #include <linux/interrupt.h> -#include <linux/delay.h> -#include <linux/reboot.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/notifier.h> #include <linux/tick.h> -#include <linux/elfcore.h> -#include <linux/kernel_stat.h> #include <linux/personality.h> #include <linux/syscalls.h> #include <linux/compat.h> #include <linux/kprobes.h> #include <linux/random.h> -#include <asm/compat.h> -#include <asm/uaccess.h> -#include <asm/pgtable.h> +#include <linux/module.h> #include <asm/system.h> #include <asm/io.h> #include <asm/processor.h> #include <asm/irq.h> #include <asm/timer.h> #include <asm/nmi.h> +#include <asm/compat.h> #include <asm/smp.h> #include "entry.h" diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index f5434d1ecb3..0c35dee10b0 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -305,8 +305,7 @@ static int set_amode_and_uaccess(unsigned long user_amode, */ static int __init early_parse_switch_amode(char *p) { - if (user_mode != SECONDARY_SPACE_MODE) - user_mode = PRIMARY_SPACE_MODE; + user_mode = PRIMARY_SPACE_MODE; return 0; } early_param("switch_amode", early_parse_switch_amode); @@ -315,10 +314,6 @@ static int __init early_parse_user_mode(char *p) { if (p && strcmp(p, "primary") == 0) user_mode = PRIMARY_SPACE_MODE; -#ifdef CONFIG_S390_EXEC_PROTECT - else if (p && strcmp(p, "secondary") == 0) - user_mode = SECONDARY_SPACE_MODE; -#endif else if (!p || strcmp(p, "home") == 0) user_mode = HOME_SPACE_MODE; else @@ -327,31 +322,9 @@ static int __init early_parse_user_mode(char *p) } early_param("user_mode", early_parse_user_mode); -#ifdef CONFIG_S390_EXEC_PROTECT -/* - * Enable execute protection? - */ -static int __init early_parse_noexec(char *p) -{ - if (!strncmp(p, "off", 3)) - return 0; - user_mode = SECONDARY_SPACE_MODE; - return 0; -} -early_param("noexec", early_parse_noexec); -#endif /* CONFIG_S390_EXEC_PROTECT */ - static void setup_addressing_mode(void) { - if (user_mode == SECONDARY_SPACE_MODE) { - if (set_amode_and_uaccess(PSW_ASC_SECONDARY, - PSW32_ASC_SECONDARY)) - pr_info("Execute protection active, " - "mvcos available\n"); - else - pr_info("Execute protection active, " - "mvcos not available\n"); - } else if (user_mode == PRIMARY_SPACE_MODE) { + if (user_mode == PRIMARY_SPACE_MODE) { if (set_amode_and_uaccess(PSW_ASC_PRIMARY, PSW32_ASC_PRIMARY)) pr_info("Address spaces switched, " "mvcos available\n"); diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index 63c7d9ff220..f8e85ecbc45 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -335,7 +335,7 @@ static int smp_rescan_cpus_sigp(cpumask_t avail) smp_cpu_polarization[logical_cpu] = POLARIZATION_UNKNWN; if (!cpu_stopped(logical_cpu)) continue; - cpu_set(logical_cpu, cpu_present_map); + set_cpu_present(logical_cpu, true); smp_cpu_state[logical_cpu] = CPU_STATE_CONFIGURED; logical_cpu = cpumask_next(logical_cpu, &avail); if (logical_cpu >= nr_cpu_ids) @@ -367,7 +367,7 @@ static int smp_rescan_cpus_sclp(cpumask_t avail) continue; __cpu_logical_map[logical_cpu] = cpu_id; smp_cpu_polarization[logical_cpu] = POLARIZATION_UNKNWN; - cpu_set(logical_cpu, cpu_present_map); + set_cpu_present(logical_cpu, true); if (cpu >= info->configured) smp_cpu_state[logical_cpu] = CPU_STATE_STANDBY; else @@ -385,7 +385,7 @@ static int __smp_rescan_cpus(void) { cpumask_t avail; - cpus_xor(avail, cpu_possible_map, cpu_present_map); + cpumask_xor(&avail, cpu_possible_mask, cpu_present_mask); if (smp_use_sigp_detection) return smp_rescan_cpus_sigp(avail); else @@ -467,7 +467,7 @@ int __cpuinit start_secondary(void *cpuvoid) notify_cpu_starting(smp_processor_id()); /* Mark this cpu as online */ ipi_call_lock(); - cpu_set(smp_processor_id(), cpu_online_map); + set_cpu_online(smp_processor_id(), true); ipi_call_unlock(); /* Switch on interrupts */ local_irq_enable(); @@ -644,7 +644,7 @@ int __cpu_disable(void) struct ec_creg_mask_parms cr_parms; int cpu = smp_processor_id(); - cpu_clear(cpu, cpu_online_map); + set_cpu_online(cpu, false); /* Disable pfault pseudo page faults on this cpu. */ pfault_fini(); @@ -654,8 +654,8 @@ int __cpu_disable(void) /* disable all external interrupts */ cr_parms.orvals[0] = 0; - cr_parms.andvals[0] = ~(1 << 15 | 1 << 14 | 1 << 13 | 1 << 12 | - 1 << 11 | 1 << 10 | 1 << 6 | 1 << 4); + cr_parms.andvals[0] = ~(1 << 15 | 1 << 14 | 1 << 13 | 1 << 11 | + 1 << 10 | 1 << 9 | 1 << 6 | 1 << 4); /* disable all I/O interrupts */ cr_parms.orvals[6] = 0; cr_parms.andvals[6] = ~(1 << 31 | 1 << 30 | 1 << 29 | 1 << 28 | @@ -681,7 +681,7 @@ void __cpu_die(unsigned int cpu) atomic_dec(&init_mm.context.attach_count); } -void cpu_die(void) +void __noreturn cpu_die(void) { idle_task_exit(); while (sigp(smp_processor_id(), sigp_stop) == sigp_busy) @@ -738,8 +738,8 @@ void __init smp_prepare_boot_cpu(void) BUG_ON(smp_processor_id() != 0); current_thread_info()->cpu = 0; - cpu_set(0, cpu_present_map); - cpu_set(0, cpu_online_map); + set_cpu_present(0, true); + set_cpu_online(0, true); S390_lowcore.percpu_offset = __per_cpu_offset[0]; current_set[0] = current; smp_cpu_state[0] = CPU_STATE_CONFIGURED; @@ -1016,21 +1016,21 @@ int __ref smp_rescan_cpus(void) get_online_cpus(); mutex_lock(&smp_cpu_state_mutex); - newcpus = cpu_present_map; + cpumask_copy(&newcpus, cpu_present_mask); rc = __smp_rescan_cpus(); if (rc) goto out; - cpus_andnot(newcpus, cpu_present_map, newcpus); - for_each_cpu_mask(cpu, newcpus) { + cpumask_andnot(&newcpus, cpu_present_mask, &newcpus); + for_each_cpu(cpu, &newcpus) { rc = smp_add_present_cpu(cpu); if (rc) - cpu_clear(cpu, cpu_present_map); + set_cpu_present(cpu, false); } rc = 0; out: mutex_unlock(&smp_cpu_state_mutex); put_online_cpus(); - if (!cpus_empty(newcpus)) + if (!cpumask_empty(&newcpus)) topology_schedule_update(); return rc; } diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c index 87be655557a..a59557f1fb5 100644 --- a/arch/s390/kernel/time.c +++ b/arch/s390/kernel/time.c @@ -810,7 +810,7 @@ static int etr_sync_clock_stop(struct etr_aib *aib, int port) etr_sync.etr_port = port; get_online_cpus(); atomic_set(&etr_sync.cpus, num_online_cpus() - 1); - rc = stop_machine(etr_sync_clock, &etr_sync, &cpu_online_map); + rc = stop_machine(etr_sync_clock, &etr_sync, cpu_online_mask); put_online_cpus(); return rc; } @@ -1579,7 +1579,7 @@ static void stp_work_fn(struct work_struct *work) memset(&stp_sync, 0, sizeof(stp_sync)); get_online_cpus(); atomic_set(&stp_sync.cpus, num_online_cpus() - 1); - stop_machine(stp_sync_clock, &stp_sync, &cpu_online_map); + stop_machine(stp_sync_clock, &stp_sync, cpu_online_mask); put_online_cpus(); if (!check_sync_clock()) diff --git a/arch/s390/kernel/topology.c b/arch/s390/kernel/topology.c index 94b06c31fc8..2eafb8c7a74 100644 --- a/arch/s390/kernel/topology.c +++ b/arch/s390/kernel/topology.c @@ -52,20 +52,20 @@ static cpumask_t cpu_group_map(struct mask_info *info, unsigned int cpu) { cpumask_t mask; - cpus_clear(mask); + cpumask_clear(&mask); if (!topology_enabled || !MACHINE_HAS_TOPOLOGY) { cpumask_copy(&mask, cpumask_of(cpu)); return mask; } while (info) { - if (cpu_isset(cpu, info->mask)) { + if (cpumask_test_cpu(cpu, &info->mask)) { mask = info->mask; break; } info = info->next; } - if (cpus_empty(mask)) - mask = cpumask_of_cpu(cpu); + if (cpumask_empty(&mask)) + cpumask_copy(&mask, cpumask_of(cpu)); return mask; } @@ -85,10 +85,10 @@ static void add_cpus_to_mask(struct topology_cpu *tl_cpu, if (cpu_logical_map(lcpu) != rcpu) continue; #ifdef CONFIG_SCHED_BOOK - cpu_set(lcpu, book->mask); + cpumask_set_cpu(lcpu, &book->mask); cpu_book_id[lcpu] = book->id; #endif - cpu_set(lcpu, core->mask); + cpumask_set_cpu(lcpu, &core->mask); cpu_core_id[lcpu] = core->id; smp_cpu_polarization[lcpu] = tl_cpu->pp; } @@ -101,13 +101,13 @@ static void clear_masks(void) info = &core_info; while (info) { - cpus_clear(info->mask); + cpumask_clear(&info->mask); info = info->next; } #ifdef CONFIG_SCHED_BOOK info = &book_info; while (info) { - cpus_clear(info->mask); + cpumask_clear(&info->mask); info = info->next; } #endif diff --git a/arch/s390/kernel/vdso32/Makefile b/arch/s390/kernel/vdso32/Makefile index d13e8755a8c..8ad2b34ad15 100644 --- a/arch/s390/kernel/vdso32/Makefile +++ b/arch/s390/kernel/vdso32/Makefile @@ -22,6 +22,9 @@ obj-y += vdso32_wrapper.o extra-y += vdso32.lds CPPFLAGS_vdso32.lds += -P -C -U$(ARCH) +# Disable gcov profiling for VDSO code +GCOV_PROFILE := n + # Force dependency (incbin is bad) $(obj)/vdso32_wrapper.o : $(obj)/vdso32.so diff --git a/arch/s390/kernel/vdso64/Makefile b/arch/s390/kernel/vdso64/Makefile index 449352dda9c..2a8ddfd12a5 100644 --- a/arch/s390/kernel/vdso64/Makefile +++ b/arch/s390/kernel/vdso64/Makefile @@ -22,6 +22,9 @@ obj-y += vdso64_wrapper.o extra-y += vdso64.lds CPPFLAGS_vdso64.lds += -P -C -U$(ARCH) +# Disable gcov profiling for VDSO code +GCOV_PROFILE := n + # Force dependency (incbin is bad) $(obj)/vdso64_wrapper.o : $(obj)/vdso64.so diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S index 1bc18cdb525..56fe6bc81fe 100644 --- a/arch/s390/kernel/vmlinux.lds.S +++ b/arch/s390/kernel/vmlinux.lds.S @@ -77,7 +77,7 @@ SECTIONS . = ALIGN(PAGE_SIZE); INIT_DATA_SECTION(0x100) - PERCPU(0x100, PAGE_SIZE) + PERCPU_SECTION(0x100) . = ALIGN(PAGE_SIZE); __init_end = .; /* freed after init ends here */ diff --git a/arch/s390/mm/extmem.c b/arch/s390/mm/extmem.c index 3cc95dd0a3a..075ddada491 100644 --- a/arch/s390/mm/extmem.c +++ b/arch/s390/mm/extmem.c @@ -412,6 +412,7 @@ __segment_load (char *name, int do_nonshared, unsigned long *addr, unsigned long struct dcss_segment *seg; int rc, diag_cc; + start_addr = end_addr = 0; seg = kmalloc(sizeof(*seg), GFP_KERNEL | GFP_DMA); if (seg == NULL) { rc = -ENOMEM; @@ -573,6 +574,7 @@ segment_modify_shared (char *name, int do_nonshared) unsigned long start_addr, end_addr, dummy; int rc, diag_cc; + start_addr = end_addr = 0; mutex_lock(&dcss_lock); seg = segment_by_name (name); if (seg == NULL) { @@ -681,8 +683,6 @@ void segment_save(char *name) { struct dcss_segment *seg; - int startpfn = 0; - int endpfn = 0; char cmd1[160]; char cmd2[80]; int i, response; @@ -698,8 +698,6 @@ segment_save(char *name) goto out; } - startpfn = seg->start_addr >> PAGE_SHIFT; - endpfn = (seg->end) >> PAGE_SHIFT; sprintf(cmd1, "DEFSEG %s", name); for (i=0; i<seg->segcnt; i++) { sprintf(cmd1+strlen(cmd1), " %lX-%lX %s", diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c index ab988135e5c..a0f9e730f26 100644 --- a/arch/s390/mm/fault.c +++ b/arch/s390/mm/fault.c @@ -225,33 +225,6 @@ static noinline void do_sigbus(struct pt_regs *regs, long int_code, force_sig_info(SIGBUS, &si, tsk); } -#ifdef CONFIG_S390_EXEC_PROTECT -static noinline int signal_return(struct pt_regs *regs, long int_code, - unsigned long trans_exc_code) -{ - u16 instruction; - int rc; - - rc = __get_user(instruction, (u16 __user *) regs->psw.addr); - - if (!rc && instruction == 0x0a77) { - clear_tsk_thread_flag(current, TIF_PER_TRAP); - if (is_compat_task()) - sys32_sigreturn(); - else - sys_sigreturn(); - } else if (!rc && instruction == 0x0aad) { - clear_tsk_thread_flag(current, TIF_PER_TRAP); - if (is_compat_task()) - sys32_rt_sigreturn(); - else - sys_rt_sigreturn(); - } else - do_sigsegv(regs, int_code, SEGV_MAPERR, trans_exc_code); - return 0; -} -#endif /* CONFIG_S390_EXEC_PROTECT */ - static noinline void do_fault_error(struct pt_regs *regs, long int_code, unsigned long trans_exc_code, int fault) { @@ -259,13 +232,6 @@ static noinline void do_fault_error(struct pt_regs *regs, long int_code, switch (fault) { case VM_FAULT_BADACCESS: -#ifdef CONFIG_S390_EXEC_PROTECT - if ((regs->psw.mask & PSW_MASK_ASC) == PSW_ASC_SECONDARY && - (trans_exc_code & 3) == 0) { - signal_return(regs, int_code, trans_exc_code); - break; - } -#endif /* CONFIG_S390_EXEC_PROTECT */ case VM_FAULT_BADMAP: /* Bad memory access. Check if it is kernel or user space. */ if (regs->psw.mask & PSW_MASK_PSTATE) { @@ -414,11 +380,6 @@ void __kprobes do_dat_exception(struct pt_regs *regs, long pgm_int_code, int access, fault; access = VM_READ | VM_EXEC | VM_WRITE; -#ifdef CONFIG_S390_EXEC_PROTECT - if ((regs->psw.mask & PSW_MASK_ASC) == PSW_ASC_SECONDARY && - (trans_exc_code & 3) == 0) - access = VM_EXEC; -#endif fault = do_exception(regs, access, trans_exc_code); if (unlikely(fault)) do_fault_error(regs, pgm_int_code & 255, trans_exc_code, fault); @@ -491,22 +452,28 @@ static int __init nopfault(char *str) __setup("nopfault", nopfault); -typedef struct { - __u16 refdiagc; - __u16 reffcode; - __u16 refdwlen; - __u16 refversn; - __u64 refgaddr; - __u64 refselmk; - __u64 refcmpmk; - __u64 reserved; -} __attribute__ ((packed, aligned(8))) pfault_refbk_t; +struct pfault_refbk { + u16 refdiagc; + u16 reffcode; + u16 refdwlen; + u16 refversn; + u64 refgaddr; + u64 refselmk; + u64 refcmpmk; + u64 reserved; +} __attribute__ ((packed, aligned(8))); int pfault_init(void) { - pfault_refbk_t refbk = - { 0x258, 0, 5, 2, __LC_CURRENT, 1ULL << 48, 1ULL << 48, - __PF_RES_FIELD }; + struct pfault_refbk refbk = { + .refdiagc = 0x258, + .reffcode = 0, + .refdwlen = 5, + .refversn = 2, + .refgaddr = __LC_CURRENT_PID, + .refselmk = 1ULL << 48, + .refcmpmk = 1ULL << 48, + .reserved = __PF_RES_FIELD }; int rc; if (!MACHINE_IS_VM || pfault_disable) @@ -524,8 +491,12 @@ int pfault_init(void) void pfault_fini(void) { - pfault_refbk_t refbk = - { 0x258, 1, 5, 2, 0ULL, 0ULL, 0ULL, 0ULL }; + struct pfault_refbk refbk = { + .refdiagc = 0x258, + .reffcode = 1, + .refdwlen = 5, + .refversn = 2, + }; if (!MACHINE_IS_VM || pfault_disable) return; @@ -537,11 +508,15 @@ void pfault_fini(void) : : "a" (&refbk), "m" (refbk) : "cc"); } +static DEFINE_SPINLOCK(pfault_lock); +static LIST_HEAD(pfault_list); + static void pfault_interrupt(unsigned int ext_int_code, unsigned int param32, unsigned long param64) { struct task_struct *tsk; __u16 subcode; + pid_t pid; /* * Get the external interruption subcode & pfault @@ -553,44 +528,79 @@ static void pfault_interrupt(unsigned int ext_int_code, if ((subcode & 0xff00) != __SUBCODE_MASK) return; kstat_cpu(smp_processor_id()).irqs[EXTINT_PFL]++; - - /* - * Get the token (= address of the task structure of the affected task). - */ -#ifdef CONFIG_64BIT - tsk = (struct task_struct *) param64; -#else - tsk = (struct task_struct *) param32; -#endif - + if (subcode & 0x0080) { + /* Get the token (= pid of the affected task). */ + pid = sizeof(void *) == 4 ? param32 : param64; + rcu_read_lock(); + tsk = find_task_by_pid_ns(pid, &init_pid_ns); + if (tsk) + get_task_struct(tsk); + rcu_read_unlock(); + if (!tsk) + return; + } else { + tsk = current; + } + spin_lock(&pfault_lock); if (subcode & 0x0080) { /* signal bit is set -> a page has been swapped in by VM */ - if (xchg(&tsk->thread.pfault_wait, -1) != 0) { + if (tsk->thread.pfault_wait == 1) { /* Initial interrupt was faster than the completion * interrupt. pfault_wait is valid. Set pfault_wait * back to zero and wake up the process. This can * safely be done because the task is still sleeping * and can't produce new pfaults. */ tsk->thread.pfault_wait = 0; + list_del(&tsk->thread.list); wake_up_process(tsk); - put_task_struct(tsk); + } else { + /* Completion interrupt was faster than initial + * interrupt. Set pfault_wait to -1 so the initial + * interrupt doesn't put the task to sleep. */ + tsk->thread.pfault_wait = -1; } + put_task_struct(tsk); } else { /* signal bit not set -> a real page is missing. */ - get_task_struct(tsk); - set_task_state(tsk, TASK_UNINTERRUPTIBLE); - if (xchg(&tsk->thread.pfault_wait, 1) != 0) { + if (tsk->thread.pfault_wait == -1) { /* Completion interrupt was faster than the initial - * interrupt (swapped in a -1 for pfault_wait). Set - * pfault_wait back to zero and exit. This can be - * done safely because tsk is running in kernel - * mode and can't produce new pfaults. */ + * interrupt (pfault_wait == -1). Set pfault_wait + * back to zero and exit. */ tsk->thread.pfault_wait = 0; - set_task_state(tsk, TASK_RUNNING); - put_task_struct(tsk); - } else + } else { + /* Initial interrupt arrived before completion + * interrupt. Let the task sleep. */ + tsk->thread.pfault_wait = 1; + list_add(&tsk->thread.list, &pfault_list); + set_task_state(tsk, TASK_UNINTERRUPTIBLE); set_tsk_need_resched(tsk); + } + } + spin_unlock(&pfault_lock); +} + +static int __cpuinit pfault_cpu_notify(struct notifier_block *self, + unsigned long action, void *hcpu) +{ + struct thread_struct *thread, *next; + struct task_struct *tsk; + + switch (action) { + case CPU_DEAD: + case CPU_DEAD_FROZEN: + spin_lock_irq(&pfault_lock); + list_for_each_entry_safe(thread, next, &pfault_list, list) { + thread->pfault_wait = 0; + list_del(&thread->list); + tsk = container_of(thread, struct task_struct, thread); + wake_up_process(tsk); + } + spin_unlock_irq(&pfault_lock); + break; + default: + break; } + return NOTIFY_OK; } static int __init pfault_irq_init(void) @@ -599,22 +609,21 @@ static int __init pfault_irq_init(void) if (!MACHINE_IS_VM) return 0; - /* - * Try to get pfault pseudo page faults going. - */ rc = register_external_interrupt(0x2603, pfault_interrupt); - if (rc) { - pfault_disable = 1; - return rc; - } - if (pfault_init() == 0) - return 0; + if (rc) + goto out_extint; + rc = pfault_init() == 0 ? 0 : -EOPNOTSUPP; + if (rc) + goto out_pfault; + hotcpu_notifier(pfault_cpu_notify, 0); + return 0; - /* Tough luck, no pfault. */ - pfault_disable = 1; +out_pfault: unregister_external_interrupt(0x2603, pfault_interrupt); - return 0; +out_extint: + pfault_disable = 1; + return rc; } early_initcall(pfault_irq_init); -#endif +#endif /* CONFIG_PFAULT */ diff --git a/arch/s390/mm/hugetlbpage.c b/arch/s390/mm/hugetlbpage.c index 639cd21f221..a4d856db915 100644 --- a/arch/s390/mm/hugetlbpage.c +++ b/arch/s390/mm/hugetlbpage.c @@ -13,7 +13,6 @@ void set_huge_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *pteptr, pte_t pteval) { pmd_t *pmdp = (pmd_t *) pteptr; - pte_t shadow_pteval = pteval; unsigned long mask; if (!MACHINE_HAS_HPAGE) { @@ -21,18 +20,9 @@ void set_huge_pte_at(struct mm_struct *mm, unsigned long addr, mask = pte_val(pteval) & (_SEGMENT_ENTRY_INV | _SEGMENT_ENTRY_RO); pte_val(pteval) = (_SEGMENT_ENTRY + __pa(pteptr)) | mask; - if (mm->context.noexec) { - pteptr += PTRS_PER_PTE; - pte_val(shadow_pteval) = - (_SEGMENT_ENTRY + __pa(pteptr)) | mask; - } } pmd_val(*pmdp) = pte_val(pteval); - if (mm->context.noexec) { - pmdp = get_shadow_table(pmdp); - pmd_val(*pmdp) = pte_val(shadow_pteval); - } } int arch_prepare_hugepage(struct page *page) diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c index bb409332a48..dfefc217169 100644 --- a/arch/s390/mm/init.c +++ b/arch/s390/mm/init.c @@ -175,7 +175,8 @@ void kernel_map_pages(struct page *page, int numpages, int enable) pmd = pmd_offset(pud, address); pte = pte_offset_kernel(pmd, address); if (!enable) { - ptep_invalidate(&init_mm, address, pte); + __ptep_ipte(address, pte); + pte_val(*pte) = _PAGE_TYPE_EMPTY; continue; } *pte = mk_pte_phys(address, __pgprot(_PAGE_TYPE_RW)); diff --git a/arch/s390/mm/pageattr.c b/arch/s390/mm/pageattr.c index f05edcc3bef..d013ed39743 100644 --- a/arch/s390/mm/pageattr.c +++ b/arch/s390/mm/pageattr.c @@ -28,7 +28,7 @@ static void change_page_attr(unsigned long addr, int numpages, pte = *ptep; pte = set(pte); - ptep_invalidate(&init_mm, addr, ptep); + __ptep_ipte(addr, ptep); *ptep = pte; addr += PAGE_SIZE; } diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c index e1850c28cd6..8d433064251 100644 --- a/arch/s390/mm/pgtable.c +++ b/arch/s390/mm/pgtable.c @@ -40,7 +40,6 @@ DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); static DEFINE_PER_CPU(struct rcu_table_freelist *, rcu_table_freelist); static void __page_table_free(struct mm_struct *mm, unsigned long *table); -static void __crst_table_free(struct mm_struct *mm, unsigned long *table); static struct rcu_table_freelist *rcu_table_freelist_get(struct mm_struct *mm) { @@ -67,7 +66,7 @@ static void rcu_table_freelist_callback(struct rcu_head *head) while (batch->pgt_index > 0) __page_table_free(batch->mm, batch->table[--batch->pgt_index]); while (batch->crst_index < RCU_FREELIST_SIZE) - __crst_table_free(batch->mm, batch->table[batch->crst_index++]); + crst_table_free(batch->mm, batch->table[batch->crst_index++]); free_page((unsigned long) batch); } @@ -125,63 +124,33 @@ static int __init parse_vmalloc(char *arg) } early_param("vmalloc", parse_vmalloc); -unsigned long *crst_table_alloc(struct mm_struct *mm, int noexec) +unsigned long *crst_table_alloc(struct mm_struct *mm) { struct page *page = alloc_pages(GFP_KERNEL, ALLOC_ORDER); if (!page) return NULL; - page->index = 0; - if (noexec) { - struct page *shadow = alloc_pages(GFP_KERNEL, ALLOC_ORDER); - if (!shadow) { - __free_pages(page, ALLOC_ORDER); - return NULL; - } - page->index = page_to_phys(shadow); - } - spin_lock_bh(&mm->context.list_lock); - list_add(&page->lru, &mm->context.crst_list); - spin_unlock_bh(&mm->context.list_lock); return (unsigned long *) page_to_phys(page); } -static void __crst_table_free(struct mm_struct *mm, unsigned long *table) -{ - unsigned long *shadow = get_shadow_table(table); - - if (shadow) - free_pages((unsigned long) shadow, ALLOC_ORDER); - free_pages((unsigned long) table, ALLOC_ORDER); -} - void crst_table_free(struct mm_struct *mm, unsigned long *table) { - struct page *page = virt_to_page(table); - - spin_lock_bh(&mm->context.list_lock); - list_del(&page->lru); - spin_unlock_bh(&mm->context.list_lock); - __crst_table_free(mm, table); + free_pages((unsigned long) table, ALLOC_ORDER); } void crst_table_free_rcu(struct mm_struct *mm, unsigned long *table) { struct rcu_table_freelist *batch; - struct page *page = virt_to_page(table); - spin_lock_bh(&mm->context.list_lock); - list_del(&page->lru); - spin_unlock_bh(&mm->context.list_lock); if (atomic_read(&mm->mm_users) < 2 && cpumask_equal(mm_cpumask(mm), cpumask_of(smp_processor_id()))) { - __crst_table_free(mm, table); + crst_table_free(mm, table); return; } batch = rcu_table_freelist_get(mm); if (!batch) { smp_call_function(smp_sync, NULL, 1); - __crst_table_free(mm, table); + crst_table_free(mm, table); return; } batch->table[--batch->crst_index] = table; @@ -197,7 +166,7 @@ int crst_table_upgrade(struct mm_struct *mm, unsigned long limit) BUG_ON(limit > (1UL << 53)); repeat: - table = crst_table_alloc(mm, mm->context.noexec); + table = crst_table_alloc(mm); if (!table) return -ENOMEM; spin_lock_bh(&mm->page_table_lock); @@ -273,7 +242,7 @@ unsigned long *page_table_alloc(struct mm_struct *mm) unsigned long *table; unsigned long bits; - bits = (mm->context.noexec || mm->context.has_pgste) ? 3UL : 1UL; + bits = (mm->context.has_pgste) ? 3UL : 1UL; spin_lock_bh(&mm->context.list_lock); page = NULL; if (!list_empty(&mm->context.pgtable_list)) { @@ -329,7 +298,7 @@ void page_table_free(struct mm_struct *mm, unsigned long *table) struct page *page; unsigned long bits; - bits = (mm->context.noexec || mm->context.has_pgste) ? 3UL : 1UL; + bits = (mm->context.has_pgste) ? 3UL : 1UL; bits <<= (__pa(table) & (PAGE_SIZE - 1)) / 256 / sizeof(unsigned long); page = pfn_to_page(__pa(table) >> PAGE_SHIFT); spin_lock_bh(&mm->context.list_lock); @@ -366,7 +335,7 @@ void page_table_free_rcu(struct mm_struct *mm, unsigned long *table) page_table_free(mm, table); return; } - bits = (mm->context.noexec || mm->context.has_pgste) ? 3UL : 1UL; + bits = (mm->context.has_pgste) ? 3UL : 1UL; bits <<= (__pa(table) & (PAGE_SIZE - 1)) / 256 / sizeof(unsigned long); page = pfn_to_page(__pa(table) >> PAGE_SHIFT); spin_lock_bh(&mm->context.list_lock); @@ -379,25 +348,6 @@ void page_table_free_rcu(struct mm_struct *mm, unsigned long *table) rcu_table_freelist_finish(); } -void disable_noexec(struct mm_struct *mm, struct task_struct *tsk) -{ - struct page *page; - - spin_lock_bh(&mm->context.list_lock); - /* Free shadow region and segment tables. */ - list_for_each_entry(page, &mm->context.crst_list, lru) - if (page->index) { - free_pages((unsigned long) page->index, ALLOC_ORDER); - page->index = 0; - } - /* "Free" second halves of page tables. */ - list_for_each_entry(page, &mm->context.pgtable_list, lru) - page->flags &= ~SECOND_HALVES; - spin_unlock_bh(&mm->context.list_lock); - mm->context.noexec = 0; - update_mm(mm, tsk); -} - /* * switch on pgstes for its userspace process (for kvm) */ diff --git a/arch/s390/mm/vmem.c b/arch/s390/mm/vmem.c index 34c43f23b28..8c1970d1dd9 100644 --- a/arch/s390/mm/vmem.c +++ b/arch/s390/mm/vmem.c @@ -95,7 +95,7 @@ static int vmem_add_mem(unsigned long start, unsigned long size, int ro) pu_dir = vmem_pud_alloc(); if (!pu_dir) goto out; - pgd_populate_kernel(&init_mm, pg_dir, pu_dir); + pgd_populate(&init_mm, pg_dir, pu_dir); } pu_dir = pud_offset(pg_dir, address); @@ -103,7 +103,7 @@ static int vmem_add_mem(unsigned long start, unsigned long size, int ro) pm_dir = vmem_pmd_alloc(); if (!pm_dir) goto out; - pud_populate_kernel(&init_mm, pu_dir, pm_dir); + pud_populate(&init_mm, pu_dir, pm_dir); } pte = mk_pte_phys(address, __pgprot(ro ? _PAGE_RO : 0)); @@ -123,7 +123,7 @@ static int vmem_add_mem(unsigned long start, unsigned long size, int ro) pt_dir = vmem_pte_alloc(); if (!pt_dir) goto out; - pmd_populate_kernel(&init_mm, pm_dir, pt_dir); + pmd_populate(&init_mm, pm_dir, pt_dir); } pt_dir = pte_offset_kernel(pm_dir, address); @@ -159,7 +159,7 @@ static void vmem_remove_range(unsigned long start, unsigned long size) continue; if (pmd_huge(*pm_dir)) { - pmd_clear_kernel(pm_dir); + pmd_clear(pm_dir); address += HPAGE_SIZE - PAGE_SIZE; continue; } @@ -192,7 +192,7 @@ int __meminit vmemmap_populate(struct page *start, unsigned long nr, int node) pu_dir = vmem_pud_alloc(); if (!pu_dir) goto out; - pgd_populate_kernel(&init_mm, pg_dir, pu_dir); + pgd_populate(&init_mm, pg_dir, pu_dir); } pu_dir = pud_offset(pg_dir, address); @@ -200,7 +200,7 @@ int __meminit vmemmap_populate(struct page *start, unsigned long nr, int node) pm_dir = vmem_pmd_alloc(); if (!pm_dir) goto out; - pud_populate_kernel(&init_mm, pu_dir, pm_dir); + pud_populate(&init_mm, pu_dir, pm_dir); } pm_dir = pmd_offset(pu_dir, address); @@ -208,7 +208,7 @@ int __meminit vmemmap_populate(struct page *start, unsigned long nr, int node) pt_dir = vmem_pte_alloc(); if (!pt_dir) goto out; - pmd_populate_kernel(&init_mm, pm_dir, pt_dir); + pmd_populate(&init_mm, pm_dir, pt_dir); } pt_dir = pte_offset_kernel(pm_dir, address); diff --git a/arch/s390/oprofile/hwsampler.c b/arch/s390/oprofile/hwsampler.c index 33cbd373cce..053caa0fd27 100644 --- a/arch/s390/oprofile/hwsampler.c +++ b/arch/s390/oprofile/hwsampler.c @@ -5,6 +5,7 @@ * Author: Heinz Graalfs <graalfs@de.ibm.com> */ +#include <linux/kernel_stat.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/smp.h> @@ -674,17 +675,11 @@ int hwsampler_activate(unsigned int cpu) static void hws_ext_handler(unsigned int ext_int_code, unsigned int param32, unsigned long param64) { - int cpu; struct hws_cpu_buffer *cb; - cpu = smp_processor_id(); - cb = &per_cpu(sampler_cpu_buffer, cpu); - - atomic_xchg( - &cb->ext_params, - atomic_read(&cb->ext_params) - | S390_lowcore.ext_params); - + kstat_cpu(smp_processor_id()).irqs[EXTINT_CPM]++; + cb = &__get_cpu_var(sampler_cpu_buffer); + atomic_xchg(&cb->ext_params, atomic_read(&cb->ext_params) | param32); if (hws_wq) queue_work(hws_wq, &cb->worker); } @@ -764,7 +759,7 @@ static int worker_check_error(unsigned int cpu, int ext_params) if (!sdbt || !*sdbt) return -EINVAL; - if (ext_params & EI_IEA) + if (ext_params & EI_PRA) cb->req_alert++; if (ext_params & EI_LSDA) @@ -1009,7 +1004,7 @@ int hwsampler_deallocate() if (hws_state != HWS_STOPPED) goto deallocate_exit; - smp_ctl_clear_bit(0, 5); /* set bit 58 CR0 off */ + ctl_clear_bit(0, 5); /* set bit 58 CR0 off */ deallocate_sdbt(); hws_state = HWS_DEALLOCATED; @@ -1123,7 +1118,7 @@ int hwsampler_shutdown() mutex_lock(&hws_sem); if (hws_state == HWS_STOPPED) { - smp_ctl_clear_bit(0, 5); /* set bit 58 CR0 off */ + ctl_clear_bit(0, 5); /* set bit 58 CR0 off */ deallocate_sdbt(); } if (hws_wq) { @@ -1198,7 +1193,7 @@ start_all_exit: hws_oom = 1; hws_flush_all = 0; /* now let them in, 1407 CPUMF external interrupts */ - smp_ctl_set_bit(0, 5); /* set CR0 bit 58 */ + ctl_set_bit(0, 5); /* set CR0 bit 58 */ return 0; } diff --git a/arch/sh/kernel/vmlinux.lds.S b/arch/sh/kernel/vmlinux.lds.S index af4d46187a7..731c10ce67b 100644 --- a/arch/sh/kernel/vmlinux.lds.S +++ b/arch/sh/kernel/vmlinux.lds.S @@ -66,7 +66,7 @@ SECTIONS __machvec_end = .; } - PERCPU(L1_CACHE_BYTES, PAGE_SIZE) + PERCPU_SECTION(L1_CACHE_BYTES) /* * .exit.text is discarded at runtime, not link time, to deal with diff --git a/arch/sparc/kernel/vmlinux.lds.S b/arch/sparc/kernel/vmlinux.lds.S index 92b557afe53..c0220759003 100644 --- a/arch/sparc/kernel/vmlinux.lds.S +++ b/arch/sparc/kernel/vmlinux.lds.S @@ -108,7 +108,7 @@ SECTIONS __sun4v_2insn_patch_end = .; } - PERCPU(SMP_CACHE_BYTES, PAGE_SIZE) + PERCPU_SECTION(SMP_CACHE_BYTES) . = ALIGN(PAGE_SIZE); __init_end = .; diff --git a/arch/tile/kernel/vmlinux.lds.S b/arch/tile/kernel/vmlinux.lds.S index 38f64fafdc1..631f10de12f 100644 --- a/arch/tile/kernel/vmlinux.lds.S +++ b/arch/tile/kernel/vmlinux.lds.S @@ -60,7 +60,7 @@ SECTIONS . = ALIGN(PAGE_SIZE); VMLINUX_SYMBOL(_sinitdata) = .; INIT_DATA_SECTION(16) :data =0 - PERCPU(L2_CACHE_BYTES, PAGE_SIZE) + PERCPU_SECTION(L2_CACHE_BYTES) . = ALIGN(PAGE_SIZE); VMLINUX_SYMBOL(_einitdata) = .; diff --git a/arch/um/Kconfig.x86 b/arch/um/Kconfig.x86 index a9da516a527..795ea8e869f 100644 --- a/arch/um/Kconfig.x86 +++ b/arch/um/Kconfig.x86 @@ -29,10 +29,10 @@ config X86_64 def_bool 64BIT config RWSEM_XCHGADD_ALGORITHM - def_bool X86_XADD + def_bool X86_XADD && 64BIT config RWSEM_GENERIC_SPINLOCK - def_bool !X86_XADD + def_bool !RWSEM_XCHGADD_ALGORITHM config 3_LEVEL_PGTABLES bool "Three-level pagetables (EXPERIMENTAL)" if !64BIT diff --git a/arch/um/include/asm/common.lds.S b/arch/um/include/asm/common.lds.S index 34bede8aad4..4938de5512d 100644 --- a/arch/um/include/asm/common.lds.S +++ b/arch/um/include/asm/common.lds.S @@ -42,7 +42,7 @@ INIT_SETUP(0) } - PERCPU(32, 32) + PERCPU_SECTION(32) .initcall.init : { INIT_CALLS diff --git a/arch/x86/include/asm/linkage.h b/arch/x86/include/asm/linkage.h index 12d55e773eb..48142971b25 100644 --- a/arch/x86/include/asm/linkage.h +++ b/arch/x86/include/asm/linkage.h @@ -8,11 +8,6 @@ #ifdef CONFIG_X86_32 #define asmlinkage CPP_ASMLINKAGE __attribute__((regparm(0))) -/* - * For 32-bit UML - mark functions implemented in assembly that use - * regparm input parameters: - */ -#define asmregparm __attribute__((regparm(3))) /* * Make sure the compiler doesn't do anything stupid with the diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h index 53278b0dfdf..a0a9779084d 100644 --- a/arch/x86/include/asm/percpu.h +++ b/arch/x86/include/asm/percpu.h @@ -509,6 +509,11 @@ do { \ * it in software. The address used in the cmpxchg16 instruction must be * aligned to a 16 byte boundary. */ +#ifdef CONFIG_SMP +#define CMPXCHG16B_EMU_CALL "call this_cpu_cmpxchg16b_emu\n\t" ASM_NOP3 +#else +#define CMPXCHG16B_EMU_CALL "call this_cpu_cmpxchg16b_emu\n\t" ASM_NOP2 +#endif #define percpu_cmpxchg16b_double(pcp1, o1, o2, n1, n2) \ ({ \ char __ret; \ @@ -517,7 +522,7 @@ do { \ typeof(o2) __o2 = o2; \ typeof(o2) __n2 = n2; \ typeof(o2) __dummy; \ - alternative_io("call this_cpu_cmpxchg16b_emu\n\t" ASM_NOP4, \ + alternative_io(CMPXCHG16B_EMU_CALL, \ "cmpxchg16b " __percpu_prefix "(%%rsi)\n\tsetz %0\n\t", \ X86_FEATURE_CX16, \ ASM_OUTPUT2("=a"(__ret), "=d"(__dummy)), \ diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 9488dcff7ae..e5293394b54 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -676,7 +676,7 @@ void mask_ioapic_entries(void) int apic, pin; for (apic = 0; apic < nr_ioapics; apic++) { - if (ioapics[apic].saved_registers) + if (!ioapics[apic].saved_registers) continue; for (pin = 0; pin < ioapics[apic].nr_registers; pin++) { @@ -699,7 +699,7 @@ int restore_ioapic_entries(void) int apic, pin; for (apic = 0; apic < nr_ioapics; apic++) { - if (ioapics[apic].saved_registers) + if (!ioapics[apic].saved_registers) continue; for (pin = 0; pin < ioapics[apic].nr_registers; pin++) diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c index f65e5b521db..807c2a2b80f 100644 --- a/arch/x86/kernel/ptrace.c +++ b/arch/x86/kernel/ptrace.c @@ -1363,7 +1363,7 @@ void send_sigtrap(struct task_struct *tsk, struct pt_regs *regs, * We must return the syscall number to actually look up in the table. * This can be -1L to skip running any syscall at all. */ -asmregparm long syscall_trace_enter(struct pt_regs *regs) +long syscall_trace_enter(struct pt_regs *regs) { long ret = 0; @@ -1408,7 +1408,7 @@ asmregparm long syscall_trace_enter(struct pt_regs *regs) return ret ?: regs->orig_ax; } -asmregparm void syscall_trace_leave(struct pt_regs *regs) +void syscall_trace_leave(struct pt_regs *regs) { bool step; diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S index 49927a863cc..61682f0ac26 100644 --- a/arch/x86/kernel/vmlinux.lds.S +++ b/arch/x86/kernel/vmlinux.lds.S @@ -326,7 +326,7 @@ SECTIONS } #if !defined(CONFIG_X86_64) || !defined(CONFIG_SMP) - PERCPU(INTERNODE_CACHE_BYTES, PAGE_SIZE) + PERCPU_SECTION(INTERNODE_CACHE_BYTES) #endif . = ALIGN(PAGE_SIZE); diff --git a/arch/xtensa/kernel/vmlinux.lds.S b/arch/xtensa/kernel/vmlinux.lds.S index a2820065927..88ecea3facb 100644 --- a/arch/xtensa/kernel/vmlinux.lds.S +++ b/arch/xtensa/kernel/vmlinux.lds.S @@ -155,7 +155,7 @@ SECTIONS INIT_RAM_FS } - PERCPU(XCHAL_ICACHE_LINESIZE, PAGE_SIZE) + PERCPU_SECTION(XCHAL_ICACHE_LINESIZE) /* We need this dummy segment here */ |