summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/mn10300/Kconfig10
-rw-r--r--arch/mn10300/Kconfig.debug17
-rw-r--r--arch/mn10300/include/asm/debugger.h43
-rw-r--r--arch/mn10300/include/asm/div64.h21
-rw-r--r--arch/mn10300/include/asm/fpu.h2
-rw-r--r--arch/mn10300/include/asm/irqflags.h2
-rw-r--r--arch/mn10300/include/asm/kgdb.h81
-rw-r--r--arch/mn10300/include/asm/smp.h6
-rw-r--r--arch/mn10300/include/asm/thread_info.h4
-rw-r--r--arch/mn10300/kernel/Makefile5
-rw-r--r--arch/mn10300/kernel/entry.S67
-rw-r--r--arch/mn10300/kernel/fpu.c18
-rw-r--r--arch/mn10300/kernel/gdb-cache.S105
-rw-r--r--arch/mn10300/kernel/gdb-io-ttysm.c8
-rw-r--r--arch/mn10300/kernel/gdb-stub.c41
-rw-r--r--arch/mn10300/kernel/internal.h7
-rw-r--r--arch/mn10300/kernel/irq.c2
-rw-r--r--arch/mn10300/kernel/kgdb.c502
-rw-r--r--arch/mn10300/kernel/mn10300-serial.c75
-rw-r--r--arch/mn10300/kernel/process.c6
-rw-r--r--arch/mn10300/kernel/smp.c26
-rw-r--r--arch/mn10300/kernel/switch_to.S111
-rw-r--r--arch/mn10300/kernel/traps.c406
-rw-r--r--arch/mn10300/mm/Kconfig.cache46
-rw-r--r--arch/mn10300/mm/Makefile9
-rw-r--r--arch/mn10300/mm/cache-dbg-flush-by-reg.S160
-rw-r--r--arch/mn10300/mm/cache-dbg-flush-by-tag.S114
-rw-r--r--arch/mn10300/mm/cache-dbg-inv-by-reg.S69
-rw-r--r--arch/mn10300/mm/cache-dbg-inv-by-tag.S120
-rw-r--r--arch/mn10300/mm/cache-dbg-inv.S47
-rw-r--r--arch/mn10300/mm/cache-flush-by-tag.S13
-rw-r--r--arch/mn10300/mm/cache-inv-by-reg.S22
-rw-r--r--arch/mn10300/mm/cache-inv-by-tag.S86
-rw-r--r--arch/mn10300/mm/cache.inc133
-rw-r--r--arch/mn10300/mm/fault.c9
-rw-r--r--arch/mn10300/proc-mn103e010/include/proc/cache.h1
-rw-r--r--arch/mn10300/proc-mn2ws0050/include/proc/cache.h1
37 files changed, 1893 insertions, 502 deletions
diff --git a/arch/mn10300/Kconfig b/arch/mn10300/Kconfig
index 10971be4306..d8ab97a73db 100644
--- a/arch/mn10300/Kconfig
+++ b/arch/mn10300/Kconfig
@@ -3,6 +3,8 @@ config MN10300
select HAVE_OPROFILE
select HAVE_GENERIC_HARDIRQS
select GENERIC_HARDIRQS_NO_DEPRECATED
+ select HAVE_ARCH_TRACEHOOK
+ select HAVE_ARCH_KGDB
config AM33_2
def_bool n
@@ -401,9 +403,9 @@ comment "[!] NOTE: A lower number/level indicates a higher priority (0 is highes
comment "____Non-maskable interrupt levels____"
comment "The following must be set to a higher priority than local_irq_disable() and on-chip serial"
-config GDBSTUB_IRQ_LEVEL
- int "GDBSTUB interrupt priority"
- depends on GDBSTUB
+config DEBUGGER_IRQ_LEVEL
+ int "DEBUGGER interrupt priority"
+ depends on KERNEL_DEBUGGER
range 0 1 if LINUX_CLI_LEVEL = 2
range 0 2 if LINUX_CLI_LEVEL = 3
range 0 3 if LINUX_CLI_LEVEL = 4
@@ -437,7 +439,7 @@ config LINUX_CLI_LEVEL
EPSW.IM from 7. Any interrupt is permitted for which the level is
lower than EPSW.IM.
- Certain interrupts, such as GDBSTUB and virtual MN10300 on-chip
+ Certain interrupts, such as DEBUGGER and virtual MN10300 on-chip
serial DMA interrupts are allowed to interrupt normal disabled
sections.
diff --git a/arch/mn10300/Kconfig.debug b/arch/mn10300/Kconfig.debug
index ce83c74b3fd..bdbfd444a9f 100644
--- a/arch/mn10300/Kconfig.debug
+++ b/arch/mn10300/Kconfig.debug
@@ -36,7 +36,7 @@ config KPROBES
config GDBSTUB
bool "Remote GDB kernel debugging"
- depends on DEBUG_KERNEL
+ depends on DEBUG_KERNEL && DEPRECATED
select DEBUG_INFO
select FRAME_POINTER
help
@@ -46,6 +46,9 @@ config GDBSTUB
RAM to avoid excessive linking time. This is only useful for kernel
hackers. If unsure, say N.
+ This is deprecated in favour of KGDB and will be removed in a later
+ version.
+
config GDBSTUB_IMMEDIATE
bool "Break into GDB stub immediately"
depends on GDBSTUB
@@ -54,6 +57,14 @@ config GDBSTUB_IMMEDIATE
possible, leaving the program counter at the beginning of
start_kernel() in init/main.c.
+config GDBSTUB_ALLOW_SINGLE_STEP
+ bool "Allow software single-stepping in GDB stub"
+ depends on GDBSTUB && !SMP && !PREEMPT
+ help
+ Allow GDB stub to perform software single-stepping through the
+ kernel. This doesn't work very well on SMP or preemptible kernels as
+ it uses temporary breakpoints to emulate single-stepping.
+
config GDB_CONSOLE
bool "Console output to GDB"
depends on GDBSTUB
@@ -142,3 +153,7 @@ config GDBSTUB_ON_TTYSx
default y
endmenu
+
+config KERNEL_DEBUGGER
+ def_bool y
+ depends on GDBSTUB || KGDB
diff --git a/arch/mn10300/include/asm/debugger.h b/arch/mn10300/include/asm/debugger.h
new file mode 100644
index 00000000000..e1d3b083696
--- /dev/null
+++ b/arch/mn10300/include/asm/debugger.h
@@ -0,0 +1,43 @@
+/* Kernel debugger for MN10300
+ *
+ * Copyright (C) 2011 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_DEBUGGER_H
+#define _ASM_DEBUGGER_H
+
+#if defined(CONFIG_KERNEL_DEBUGGER)
+
+extern int debugger_intercept(enum exception_code, int, int, struct pt_regs *);
+extern int at_debugger_breakpoint(struct pt_regs *);
+
+#ifndef CONFIG_MN10300_DEBUGGER_CACHE_NO_FLUSH
+extern void debugger_local_cache_flushinv(void);
+extern void debugger_local_cache_flushinv_one(u8 *);
+#else
+static inline void debugger_local_cache_flushinv(void) {}
+static inline void debugger_local_cache_flushinv_one(u8 *addr) {}
+#endif
+
+#else /* CONFIG_KERNEL_DEBUGGER */
+
+static inline int debugger_intercept(enum exception_code excep,
+ int signo, int si_code,
+ struct pt_regs *regs)
+{
+ return 0;
+}
+
+static inline int at_debugger_breakpoint(struct pt_regs *regs)
+{
+ return 0;
+}
+
+#endif /* CONFIG_KERNEL_DEBUGGER */
+#endif /* _ASM_DEBUGGER_H */
diff --git a/arch/mn10300/include/asm/div64.h b/arch/mn10300/include/asm/div64.h
index 34dcb8e6830..503efab2a51 100644
--- a/arch/mn10300/include/asm/div64.h
+++ b/arch/mn10300/include/asm/div64.h
@@ -16,6 +16,19 @@
extern void ____unhandled_size_in_do_div___(void);
/*
+ * Beginning with gcc 4.6, the MDR register is represented explicitly. We
+ * must, therefore, at least explicitly clobber the register when we make
+ * changes to it. The following assembly fragments *could* be rearranged in
+ * order to leave the moves to/from the MDR register to the compiler, but the
+ * gains would be minimal at best.
+ */
+#if __GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 6)
+# define CLOBBER_MDR_CC "mdr", "cc"
+#else
+# define CLOBBER_MDR_CC "cc"
+#endif
+
+/*
* divide n by base, leaving the result in n and returning the remainder
* - we can do this quite efficiently on the MN10300 by cascading the divides
* through the MDR register
@@ -29,7 +42,7 @@ extern void ____unhandled_size_in_do_div___(void);
"mov mdr,%1 \n" \
: "+r"(n), "=d"(__rem) \
: "r"(base), "1"(__rem) \
- : "cc" \
+ : CLOBBER_MDR_CC \
); \
} else if (sizeof(n) <= 8) { \
union { \
@@ -48,7 +61,7 @@ extern void ____unhandled_size_in_do_div___(void);
: "=d"(__rem), "=r"(__quot.w[1]), "=r"(__quot.w[0]) \
: "r"(base), "0"(__rem), "1"(__quot.w[1]), \
"2"(__quot.w[0]) \
- : "cc" \
+ : CLOBBER_MDR_CC \
); \
n = __quot.l; \
} else { \
@@ -72,7 +85,7 @@ unsigned __muldiv64u(unsigned val, unsigned mult, unsigned div)
* MDR = MDR:val%div */
: "=r"(result)
: "0"(val), "ir"(mult), "r"(div)
- : "cc"
+ : CLOBBER_MDR_CC
);
return result;
@@ -93,7 +106,7 @@ signed __muldiv64s(signed val, signed mult, signed div)
* MDR = MDR:val%div */
: "=r"(result)
: "0"(val), "ir"(mult), "r"(div)
- : "cc"
+ : CLOBBER_MDR_CC
);
return result;
diff --git a/arch/mn10300/include/asm/fpu.h b/arch/mn10300/include/asm/fpu.h
index b7625de8ead..738ff72659d 100644
--- a/arch/mn10300/include/asm/fpu.h
+++ b/arch/mn10300/include/asm/fpu.h
@@ -55,7 +55,6 @@ static inline void clear_using_fpu(struct task_struct *tsk)
extern asmlinkage void fpu_kill_state(struct task_struct *);
extern asmlinkage void fpu_exception(struct pt_regs *, enum exception_code);
-extern asmlinkage void fpu_invalid_op(struct pt_regs *, enum exception_code);
extern asmlinkage void fpu_init_state(void);
extern asmlinkage void fpu_save(struct fpu_state_struct *);
extern int fpu_setup_sigcontext(struct fpucontext *buf);
@@ -113,7 +112,6 @@ static inline void flush_fpu(void)
extern asmlinkage
void unexpected_fpu_exception(struct pt_regs *, enum exception_code);
-#define fpu_invalid_op unexpected_fpu_exception
#define fpu_exception unexpected_fpu_exception
struct task_struct;
diff --git a/arch/mn10300/include/asm/irqflags.h b/arch/mn10300/include/asm/irqflags.h
index 7a7ae12c711..678f68d5f37 100644
--- a/arch/mn10300/include/asm/irqflags.h
+++ b/arch/mn10300/include/asm/irqflags.h
@@ -20,7 +20,7 @@
/*
* interrupt control
* - "disabled": run in IM1/2
- * - level 0 - GDB stub
+ * - level 0 - kernel debugger
* - level 1 - virtual serial DMA (if present)
* - level 5 - normal interrupt priority
* - level 6 - timer interrupt
diff --git a/arch/mn10300/include/asm/kgdb.h b/arch/mn10300/include/asm/kgdb.h
new file mode 100644
index 00000000000..eb245f18a70
--- /dev/null
+++ b/arch/mn10300/include/asm/kgdb.h
@@ -0,0 +1,81 @@
+/* Kernel debugger for MN10300
+ *
+ * Copyright (C) 2010 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_KGDB_H
+#define _ASM_KGDB_H
+
+/*
+ * BUFMAX defines the maximum number of characters in inbound/outbound
+ * buffers at least NUMREGBYTES*2 are needed for register packets
+ * Longer buffer is needed to list all threads
+ */
+#define BUFMAX 1024
+
+/*
+ * Note that this register image is in a different order than the register
+ * image that Linux produces at interrupt time.
+ */
+enum regnames {
+ GDB_FR_D0 = 0,
+ GDB_FR_D1 = 1,
+ GDB_FR_D2 = 2,
+ GDB_FR_D3 = 3,
+ GDB_FR_A0 = 4,
+ GDB_FR_A1 = 5,
+ GDB_FR_A2 = 6,
+ GDB_FR_A3 = 7,
+
+ GDB_FR_SP = 8,
+ GDB_FR_PC = 9,
+ GDB_FR_MDR = 10,
+ GDB_FR_EPSW = 11,
+ GDB_FR_LIR = 12,
+ GDB_FR_LAR = 13,
+ GDB_FR_MDRQ = 14,
+
+ GDB_FR_E0 = 15,
+ GDB_FR_E1 = 16,
+ GDB_FR_E2 = 17,
+ GDB_FR_E3 = 18,
+ GDB_FR_E4 = 19,
+ GDB_FR_E5 = 20,
+ GDB_FR_E6 = 21,
+ GDB_FR_E7 = 22,
+
+ GDB_FR_SSP = 23,
+ GDB_FR_MSP = 24,
+ GDB_FR_USP = 25,
+ GDB_FR_MCRH = 26,
+ GDB_FR_MCRL = 27,
+ GDB_FR_MCVF = 28,
+
+ GDB_FR_FPCR = 29,
+ GDB_FR_DUMMY0 = 30,
+ GDB_FR_DUMMY1 = 31,
+
+ GDB_FR_FS0 = 32,
+
+ GDB_FR_SIZE = 64,
+};
+
+#define GDB_ORIG_D0 41
+#define NUMREGBYTES (GDB_FR_SIZE*4)
+
+static inline void arch_kgdb_breakpoint(void)
+{
+ asm(".globl __arch_kgdb_breakpoint; __arch_kgdb_breakpoint: break");
+}
+extern u8 __arch_kgdb_breakpoint;
+
+#define BREAK_INSTR_SIZE 1
+#define CACHE_FLUSH_IS_SAFE 1
+
+#endif /* _ASM_KGDB_H */
diff --git a/arch/mn10300/include/asm/smp.h b/arch/mn10300/include/asm/smp.h
index a3930e43a95..6745dbe6494 100644
--- a/arch/mn10300/include/asm/smp.h
+++ b/arch/mn10300/include/asm/smp.h
@@ -34,7 +34,7 @@
#define LOCAL_TIMER_IPI 193
#define FLUSH_CACHE_IPI 194
#define CALL_FUNCTION_NMI_IPI 195
-#define GDB_NMI_IPI 196
+#define DEBUGGER_NMI_IPI 196
#define SMP_BOOT_IRQ 195
@@ -43,6 +43,7 @@
#define LOCAL_TIMER_GxICR_LV GxICR_LEVEL_4
#define FLUSH_CACHE_GxICR_LV GxICR_LEVEL_0
#define SMP_BOOT_GxICR_LV GxICR_LEVEL_0
+#define DEBUGGER_GxICR_LV CONFIG_DEBUGGER_IRQ_LEVEL
#define TIME_OUT_COUNT_BOOT_IPI 100
#define DELAY_TIME_BOOT_IPI 75000
@@ -61,8 +62,9 @@
* An alternate way of dealing with this could be to use the EPSW.S bits to
* cache this information for systems with up to four CPUs.
*/
+#define arch_smp_processor_id() (CPUID)
#if 0
-#define raw_smp_processor_id() (CPUID)
+#define raw_smp_processor_id() (arch_smp_processor_id())
#else
#define raw_smp_processor_id() (current_thread_info()->cpu)
#endif
diff --git a/arch/mn10300/include/asm/thread_info.h b/arch/mn10300/include/asm/thread_info.h
index 8d53f09c878..87c213002d4 100644
--- a/arch/mn10300/include/asm/thread_info.h
+++ b/arch/mn10300/include/asm/thread_info.h
@@ -131,7 +131,11 @@ static inline unsigned long current_stack_pointer(void)
kmalloc_node(THREAD_SIZE, GFP_KERNEL, node)
#endif
+#ifndef CONFIG_KGDB
#define free_thread_info(ti) kfree((ti))
+#else
+extern void free_thread_info(struct thread_info *);
+#endif
#define get_thread_info(ti) get_task_struct((ti)->task)
#define put_thread_info(ti) put_task_struct((ti)->task)
diff --git a/arch/mn10300/kernel/Makefile b/arch/mn10300/kernel/Makefile
index a06a2e10051..47ed30fe817 100644
--- a/arch/mn10300/kernel/Makefile
+++ b/arch/mn10300/kernel/Makefile
@@ -21,11 +21,8 @@ obj-$(CONFIG_GDBSTUB) += gdb-stub.o gdb-low.o
obj-$(CONFIG_GDBSTUB_ON_TTYSx) += gdb-io-serial.o gdb-io-serial-low.o
obj-$(CONFIG_GDBSTUB_ON_TTYSMx) += gdb-io-ttysm.o gdb-io-ttysm-low.o
-ifeq ($(CONFIG_MN10300_CACHE_ENABLED),y)
-obj-$(CONFIG_GDBSTUB) += gdb-cache.o
-endif
-
obj-$(CONFIG_MN10300_RTC) += rtc.o
obj-$(CONFIG_PROFILE) += profile.o profile-low.o
obj-$(CONFIG_MODULES) += module.o
obj-$(CONFIG_KPROBES) += kprobes.o
+obj-$(CONFIG_KGDB) += kgdb.o
diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S
index f00b9bafcd3..fb93ad720b8 100644
--- a/arch/mn10300/kernel/entry.S
+++ b/arch/mn10300/kernel/entry.S
@@ -266,7 +266,11 @@ ENTRY(raw_bus_error)
###############################################################################
#
-# Miscellaneous exception entry points
+# NMI exception entry points
+#
+# This is used by ordinary interrupt channels that have the GxICR_NMI bit set
+# in addition to the main NMI and Watchdog channels. SMP NMI IPIs use this
+# facility.
#
###############################################################################
ENTRY(nmi_handler)
@@ -281,7 +285,7 @@ ENTRY(nmi_handler)
and NMIAGR_GN,d0
lsr 0x2,d0
cmp CALL_FUNCTION_NMI_IPI,d0
- bne 5f # if not call function, jump
+ bne nmi_not_smp_callfunc # if not call function, jump
# function call nmi ipi
add 4,sp # no need to store TBR
@@ -295,59 +299,38 @@ ENTRY(nmi_handler)
call smp_nmi_call_function_interrupt[],0
RESTORE_ALL
-5:
-#ifdef CONFIG_GDBSTUB
- cmp GDB_NMI_IPI,d0
- bne 3f # if not gdb nmi ipi, jump
+nmi_not_smp_callfunc:
+#ifdef CONFIG_KERNEL_DEBUGGER
+ cmp DEBUGGER_NMI_IPI,d0
+ bne nmi_not_debugger # if not kernel debugger NMI IPI, jump
- # gdb nmi ipi
+ # kernel debugger NMI IPI
add 4,sp # no need to store TBR
mov GxICR_DETECT,d0 # clear NMI
- movbu d0,(GxICR(GDB_NMI_IPI))
- movhu (GxICR(GDB_NMI_IPI)),d0
+ movbu d0,(GxICR(DEBUGGER_NMI_IPI))
+ movhu (GxICR(DEBUGGER_NMI_IPI)),d0
and ~EPSW_NMID,epsw # enable NMI
-#ifdef CONFIG_MN10300_CACHE_ENABLED
- mov (gdbstub_nmi_opr_type),d0
- cmp GDBSTUB_NMI_CACHE_PURGE,d0
- bne 4f # if not gdb cache purge, jump
-
- # gdb cache purge nmi ipi
- add -20,sp
- mov d1,(4,sp)
- mov a0,(8,sp)
- mov a1,(12,sp)
- mov mdr,d0
- mov d0,(16,sp)
- call gdbstub_local_purge_cache[],0
- mov 0x1,d0
- mov (CPUID),d1
- asl d1,d0
- mov gdbstub_nmi_cpumask,a0
- bclr d0,(a0)
- mov (4,sp),d1
- mov (8,sp),a0
- mov (12,sp),a1
- mov (16,sp),d0
- mov d0,mdr
- add 20,sp
- mov (sp),d0
- add 4,sp
- rti
-4:
-#endif /* CONFIG_MN10300_CACHE_ENABLED */
- # gdb wait nmi ipi
+
mov (sp),d0
SAVE_ALL
- call gdbstub_nmi_wait[],0
+ mov fp,d0 # arg 0: stacked register file
+ mov a2,d1 # arg 1: exception number
+ call debugger_nmi_interrupt[],0
RESTORE_ALL
-3:
-#endif /* CONFIG_GDBSTUB */
+
+nmi_not_debugger:
+#endif /* CONFIG_KERNEL_DEBUGGER */
mov (sp),d0 # restore TBR to d0
add 4,sp
#endif /* CONFIG_SMP */
bra __common_exception_nonmi
+###############################################################################
+#
+# General exception entry point
+#
+###############################################################################
ENTRY(__common_exception)
add -4,sp
mov d0,(sp)
diff --git a/arch/mn10300/kernel/fpu.c b/arch/mn10300/kernel/fpu.c
index 5f9c3fa19a8..bb5fa7df6c4 100644
--- a/arch/mn10300/kernel/fpu.c
+++ b/arch/mn10300/kernel/fpu.c
@@ -70,24 +70,6 @@ asmlinkage void fpu_exception(struct pt_regs *regs, enum exception_code code)
}
/*
- * handle an FPU invalid_op exception
- * - Derived from DO_EINFO() macro in arch/mn10300/kernel/traps.c
- */
-asmlinkage void fpu_invalid_op(struct pt_regs *regs, enum exception_code code)
-{
- siginfo_t info;
-
- if (!user_mode(regs))
- die_if_no_fixup("FPU invalid opcode", regs, code);
-
- info.si_signo = SIGILL;
- info.si_errno = 0;
- info.si_code = ILL_COPROC;
- info.si_addr = (void *) regs->pc;
- force_sig_info(info.si_signo, &info, current);
-}
-
-/*
* save the FPU state to a signal context
*/
int fpu_setup_sigcontext(struct fpucontext *fpucontext)
diff --git a/arch/mn10300/kernel/gdb-cache.S b/arch/mn10300/kernel/gdb-cache.S
deleted file mode 100644
index 1108badc3d3..00000000000
--- a/arch/mn10300/kernel/gdb-cache.S
+++ /dev/null
@@ -1,105 +0,0 @@
-###############################################################################
-#
-# MN10300 Low-level cache purging routines for gdbstub
-#
-# Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
-# Written by David Howells (dhowells@redhat.com)
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public Licence
-# as published by the Free Software Foundation; either version
-# 2 of the Licence, or (at your option) any later version.
-#
-###############################################################################
-#include <linux/sys.h>
-#include <linux/linkage.h>
-#include <asm/smp.h>
-#include <asm/cache.h>
-#include <asm/cpu-regs.h>
-#include <asm/exceptions.h>
-#include <asm/frame.inc>
-#include <asm/serial-regs.h>
-
- .text
-
-###############################################################################
-#
-# GDB stub cache purge
-#
-###############################################################################
- .type gdbstub_purge_cache,@function
-ENTRY(gdbstub_purge_cache)
- #######################################################################
- # read the addresses tagged in the cache's tag RAM and attempt to flush
- # those addresses specifically
- # - we rely on the hardware to filter out invalid tag entry addresses
- mov DCACHE_TAG(0,0),a0 # dcache tag RAM access address
- mov DCACHE_PURGE(0,0),a1 # dcache purge request address
- mov L1_CACHE_NWAYS*L1_CACHE_NENTRIES,d1 # total number of entries
-
-mn10300_dcache_flush_loop:
- mov (a0),d0
- and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0
- or L1_CACHE_TAG_VALID,d0 # retain valid entries in the
- # cache
- mov d0,(a1) # conditional purge
-
-mn10300_dcache_flush_skip:
- add L1_CACHE_BYTES,a0
- add L1_CACHE_BYTES,a1
- add -1,d1
- bne mn10300_dcache_flush_loop
-
-;; # unconditionally flush and invalidate the dcache
-;; mov DCACHE_PURGE(0,0),a1 # dcache purge request address
-;; mov L1_CACHE_NWAYS*L1_CACHE_NENTRIES,d1 # total number of
-;; # entries
-;;
-;; gdbstub_purge_cache__dcache_loop:
-;; mov (a1),d0 # unconditional purge
-;;
-;; add L1_CACHE_BYTES,a1
-;; add -1,d1
-;; bne gdbstub_purge_cache__dcache_loop
-
- #######################################################################
- # now invalidate the icache
- mov CHCTR,a0
- movhu (a0),a1
-
- mov epsw,d1
- and ~EPSW_IE,epsw
- nop
- nop
-
- # disable the icache
- and ~CHCTR_ICEN,d0
- movhu d0,(a0)
-
- # and wait for it to calm down
- setlb
- movhu (a0),d0
- btst CHCTR_ICBUSY,d0
- lne
-
- # invalidate
- or CHCTR_ICINV,d0
- movhu d0,(a0)
-
- # wait for the cache to finish
- mov CHCTR,a0
- setlb
- movhu (a0),d0
- btst CHCTR_ICBUSY,d0
- lne
-
- # and reenable it
- movhu a1,(a0)
- movhu (a0),d0 # read back to flush
- # (SIGILLs all over without this)
-
- mov d1,epsw
-
- ret [],0
-
- .size gdbstub_purge_cache,.-gdbstub_purge_cache
diff --git a/arch/mn10300/kernel/gdb-io-ttysm.c b/arch/mn10300/kernel/gdb-io-ttysm.c
index abdeea153c8..c859cacbb9c 100644
--- a/arch/mn10300/kernel/gdb-io-ttysm.c
+++ b/arch/mn10300/kernel/gdb-io-ttysm.c
@@ -59,10 +59,10 @@ void __init gdbstub_io_init(void)
/* we want to get serial receive interrupts */
set_intr_level(gdbstub_port->rx_irq,
- NUM2GxICR_LEVEL(CONFIG_GDBSTUB_IRQ_LEVEL));
+ NUM2GxICR_LEVEL(CONFIG_DEBUGGER_IRQ_LEVEL));
set_intr_level(gdbstub_port->tx_irq,
- NUM2GxICR_LEVEL(CONFIG_GDBSTUB_IRQ_LEVEL));
- set_intr_stub(NUM2EXCEP_IRQ_LEVEL(CONFIG_GDBSTUB_IRQ_LEVEL),
+ NUM2GxICR_LEVEL(CONFIG_DEBUGGER_IRQ_LEVEL));
+ set_intr_stub(NUM2EXCEP_IRQ_LEVEL(CONFIG_DEBUGGER_IRQ_LEVEL),
gdbstub_io_rx_handler);
*gdbstub_port->rx_icr |= GxICR_ENABLE;
@@ -88,7 +88,7 @@ void __init gdbstub_io_init(void)
/* permit level 0 IRQs only */
arch_local_change_intr_mask_level(
- NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1));
+ NUM2EPSW_IM(CONFIG_DEBUGGER_IRQ_LEVEL + 1));
}
/*
diff --git a/arch/mn10300/kernel/gdb-stub.c b/arch/mn10300/kernel/gdb-stub.c
index b169d99d9f2..538266b2c9b 100644
--- a/arch/mn10300/kernel/gdb-stub.c
+++ b/arch/mn10300/kernel/gdb-stub.c
@@ -133,7 +133,7 @@
#include <asm/system.h>
#include <asm/gdb-stub.h>
#include <asm/exceptions.h>
-#include <asm/cacheflush.h>
+#include <asm/debugger.h>
#include <asm/serial-regs.h>
#include <asm/busctl-regs.h>
#include <unit/leds.h>
@@ -405,6 +405,7 @@ static int hexToInt(char **ptr, int *intValue)
return (numChars);
}
+#ifdef CONFIG_GDBSTUB_ALLOW_SINGLE_STEP
/*
* We single-step by setting breakpoints. When an exception
* is handled, we need to restore the instructions hoisted
@@ -729,6 +730,7 @@ static int gdbstub_single_step(struct pt_regs *regs)
__gdbstub_restore_bp();
return -EFAULT;
}
+#endif /* CONFIG_GDBSTUB_ALLOW_SINGLE_STEP */
#ifdef CONFIG_GDBSTUB_CONSOLE
@@ -1171,7 +1173,7 @@ int gdbstub_clear_breakpoint(u8 *addr, int len)
/*
* This function does all command processing for interfacing to gdb
- * - returns 1 if the exception should be skipped, 0 otherwise.
+ * - returns 0 if the exception should be skipped, -ERROR otherwise.
*/
static int gdbstub(struct pt_regs *regs, enum exception_code excep)
{
@@ -1186,7 +1188,7 @@ static int gdbstub(struct pt_regs *regs, enum exception_code excep)
int loop;
if (excep == EXCEP_FPU_DISABLED)
- return 0;
+ return -ENOTSUPP;
gdbstub_flush_caches = 0;
@@ -1195,7 +1197,7 @@ static int gdbstub(struct pt_regs *regs, enum exception_code excep)
asm volatile("mov mdr,%0" : "=d"(mdr));
local_save_flags(epsw);
arch_local_change_intr_mask_level(
- NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1));
+ NUM2EPSW_IM(CONFIG_DEBUGGER_IRQ_LEVEL + 1));
gdbstub_store_fpu();
@@ -1208,11 +1210,13 @@ static int gdbstub(struct pt_regs *regs, enum exception_code excep)
/* if we were single stepping, restore the opcodes hoisted for the
* breakpoint[s] */
broke = 0;
+#ifdef CONFIG_GDBSTUB_ALLOW_SINGLE_STEP
if ((step_bp[0].addr && step_bp[0].addr == (u8 *) regs->pc) ||
(step_bp[1].addr && step_bp[1].addr == (u8 *) regs->pc))
broke = 1;
__gdbstub_restore_bp();
+#endif
if (gdbstub_rx_unget) {
sigval = SIGINT;
@@ -1548,17 +1552,21 @@ packet_waiting:
* Step to next instruction
*/
case 's':
- /*
- * using the T flag doesn't seem to perform single
+ /* Using the T flag doesn't seem to perform single
* stepping (it seems to wind up being caught by the
* JTAG unit), so we have to use breakpoints and
* continue instead.
*/
+#ifdef CONFIG_GDBSTUB_ALLOW_SINGLE_STEP
if (gdbstub_single_step(regs) < 0)
/* ignore any fault error for now */
gdbstub_printk("unable to set single-step"
" bp\n");
goto done;
+#else
+ gdbstub_strcpy(output_buffer, "E01");
+ break;
+#endif
/*
* Set baud rate (bBB)
@@ -1657,7 +1665,7 @@ done:
* NB: We flush both caches, just to be sure...
*/
if (gdbstub_flush_caches)
- gdbstub_purge_cache();
+ debugger_local_cache_flushinv();
gdbstub_load_fpu();
mn10300_set_gdbleds(0);
@@ -1667,14 +1675,23 @@ done:
touch_softlockup_watchdog();
local_irq_restore(epsw);
- return 1;
+ return 0;
+}
+
+/*
+ * Determine if we hit a debugger special breakpoint that needs skipping over
+ * automatically.
+ */
+int at_debugger_breakpoint(struct pt_regs *regs)
+{
+ return 0;
}
/*
* handle event interception
*/
-asmlinkage int gdbstub_intercept(struct pt_regs *regs,
- enum exception_code excep)
+asmlinkage int debugger_intercept(enum exception_code excep,
+ int signo, int si_code, struct pt_regs *regs)
{
static u8 notfirst = 1;
int ret;
@@ -1688,7 +1705,7 @@ asmlinkage int gdbstub_intercept(struct pt_regs *regs,
asm("mov mdr,%0" : "=d"(mdr));
gdbstub_entry(
- "--> gdbstub_intercept(%p,%04x) [MDR=%lx PC=%lx]\n",
+ "--> debugger_intercept(%p,%04x) [MDR=%lx PC=%lx]\n",
regs, excep, mdr, regs->pc);
gdbstub_entry(
@@ -1722,7 +1739,7 @@ asmlinkage int gdbstub_intercept(struct pt_regs *regs,
ret = gdbstub(regs, excep);
- gdbstub_entry("<-- gdbstub_intercept()\n");
+ gdbstub_entry("<-- debugger_intercept()\n");
gdbstub_busy = 0;
return ret;
}
diff --git a/arch/mn10300/kernel/internal.h b/arch/mn10300/kernel/internal.h
index ea946613f46..a5ac755dd69 100644
--- a/arch/mn10300/kernel/internal.h
+++ b/arch/mn10300/kernel/internal.h
@@ -30,6 +30,13 @@ extern void mn10300_low_ipi_handler(void);
#endif
/*
+ * smp.c
+ */
+#ifdef CONFIG_SMP
+extern void smp_jump_to_debugger(void);
+#endif
+
+/*
* time.c
*/
extern irqreturn_t local_timer_interrupt(void);
diff --git a/arch/mn10300/kernel/irq.c b/arch/mn10300/kernel/irq.c
index f09fed5e6af..5f7fc3eb45e 100644
--- a/arch/mn10300/kernel/irq.c
+++ b/arch/mn10300/kernel/irq.c
@@ -153,7 +153,7 @@ mn10300_cpupic_setaffinity(struct irq_data *d, const struct cpumask *mask,
case LOCAL_TIMER_IPI:
case FLUSH_CACHE_IPI:
case CALL_FUNCTION_NMI_IPI:
- case GDB_NMI_IPI:
+ case DEBUGGER_NMI_IPI:
#ifdef CONFIG_MN10300_TTYSM0
case SC0RXIRQ:
case SC0TXIRQ:
diff --git a/arch/mn10300/kernel/kgdb.c b/arch/mn10300/kernel/kgdb.c
new file mode 100644
index 00000000000..f6c981db2a3
--- /dev/null
+++ b/arch/mn10300/kernel/kgdb.c
@@ -0,0 +1,502 @@
+/* kgdb support for MN10300
+ *
+ * Copyright (C) 2010 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#include <linux/slab.h>
+#include <linux/ptrace.h>
+#include <linux/kgdb.h>
+#include <linux/uaccess.h>
+#include <unit/leds.h>
+#include <unit/serial.h>
+#include <asm/debugger.h>
+#include <asm/serial-regs.h>
+#include "internal.h"
+
+/*
+ * Software single-stepping breakpoint save (used by __switch_to())
+ */
+static struct thread_info *kgdb_sstep_thread;
+u8 *kgdb_sstep_bp_addr[2];
+u8 kgdb_sstep_bp[2];
+
+/*
+ * Copy kernel exception frame registers to the GDB register file
+ */
+void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
+{
+ unsigned long ssp = (unsigned long) (regs + 1);
+
+ gdb_regs[GDB_FR_D0] = regs->d0;
+ gdb_regs[GDB_FR_D1] = regs->d1;
+ gdb_regs[GDB_FR_D2] = regs->d2;
+ gdb_regs[GDB_FR_D3] = regs->d3;
+ gdb_regs[GDB_FR_A0] = regs->a0;
+ gdb_regs[GDB_FR_A1] = regs->a1;
+ gdb_regs[GDB_FR_A2] = regs->a2;
+ gdb_regs[GDB_FR_A3] = regs->a3;
+ gdb_regs[GDB_FR_SP] = (regs->epsw & EPSW_nSL) ? regs->sp : ssp;
+ gdb_regs[GDB_FR_PC] = regs->pc;
+ gdb_regs[GDB_FR_MDR] = regs->mdr;
+ gdb_regs[GDB_FR_EPSW] = regs->epsw;
+ gdb_regs[GDB_FR_LIR] = regs->lir;
+ gdb_regs[GDB_FR_LAR] = regs->lar;
+ gdb_regs[GDB_FR_MDRQ] = regs->mdrq;
+ gdb_regs[GDB_FR_E0] = regs->e0;
+ gdb_regs[GDB_FR_E1] = regs->e1;
+ gdb_regs[GDB_FR_E2] = regs->e2;
+ gdb_regs[GDB_FR_E3] = regs->e3;
+ gdb_regs[GDB_FR_E4] = regs->e4;
+ gdb_regs[GDB_FR_E5] = regs->e5;
+ gdb_regs[GDB_FR_E6] = regs->e6;
+ gdb_regs[GDB_FR_E7] = regs->e7;
+ gdb_regs[GDB_FR_SSP] = ssp;
+ gdb_regs[GDB_FR_MSP] = 0;
+ gdb_regs[GDB_FR_USP] = regs->sp;
+ gdb_regs[GDB_FR_MCRH] = regs->mcrh;
+ gdb_regs[GDB_FR_MCRL] = regs->mcrl;
+ gdb_regs[GDB_FR_MCVF] = regs->mcvf;
+ gdb_regs[GDB_FR_DUMMY0] = 0;
+ gdb_regs[GDB_FR_DUMMY1] = 0;
+ gdb_regs[GDB_FR_FS0] = 0;
+}
+
+/*
+ * Extracts kernel SP/PC values understandable by gdb from the values
+ * saved by switch_to().
+ */
+void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p)
+{
+ gdb_regs[GDB_FR_SSP] = p->thread.sp;
+ gdb_regs[GDB_FR_PC] = p->thread.pc;
+ gdb_regs[GDB_FR_A3] = p->thread.a3;
+ gdb_regs[GDB_FR_USP] = p->thread.usp;
+ gdb_regs[GDB_FR_FPCR] = p->thread.fpu_state.fpcr;
+}
+
+/*
+ * Fill kernel exception frame registers from the GDB register file
+ */
+void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs)
+{
+ regs->d0 = gdb_regs[GDB_FR_D0];
+ regs->d1 = gdb_regs[GDB_FR_D1];
+ regs->d2 = gdb_regs[GDB_FR_D2];
+ regs->d3 = gdb_regs[GDB_FR_D3];
+ regs->a0 = gdb_regs[GDB_FR_A0];
+ regs->a1 = gdb_regs[GDB_FR_A1];
+ regs->a2 = gdb_regs[GDB_FR_A2];
+ regs->a3 = gdb_regs[GDB_FR_A3];
+ regs->sp = gdb_regs[GDB_FR_SP];
+ regs->pc = gdb_regs[GDB_FR_PC];
+ regs->mdr = gdb_regs[GDB_FR_MDR];
+ regs->epsw = gdb_regs[GDB_FR_EPSW];
+ regs->lir = gdb_regs[GDB_FR_LIR];
+ regs->lar = gdb_regs[GDB_FR_LAR];
+ regs->mdrq = gdb_regs[GDB_FR_MDRQ];
+ regs->e0 = gdb_regs[GDB_FR_E0];
+ regs->e1 = gdb_regs[GDB_FR_E1];
+ regs->e2 = gdb_regs[GDB_FR_E2];
+ regs->e3 = gdb_regs[GDB_FR_E3];
+ regs->e4 = gdb_regs[GDB_FR_E4];
+ regs->e5 = gdb_regs[GDB_FR_E5];
+ regs->e6 = gdb_regs[GDB_FR_E6];
+ regs->e7 = gdb_regs[GDB_FR_E7];
+ regs->sp = gdb_regs[GDB_FR_SSP];
+ /* gdb_regs[GDB_FR_MSP]; */
+ // regs->usp = gdb_regs[GDB_FR_USP];
+ regs->mcrh = gdb_regs[GDB_FR_MCRH];
+ regs->mcrl = gdb_regs[GDB_FR_MCRL];
+ regs->mcvf = gdb_regs[GDB_FR_MCVF];
+ /* gdb_regs[GDB_FR_DUMMY0]; */
+ /* gdb_regs[GDB_FR_DUMMY1]; */
+
+ // regs->fpcr = gdb_regs[GDB_FR_FPCR];
+ // regs->fs0 = gdb_regs[GDB_FR_FS0];
+}
+
+struct kgdb_arch arch_kgdb_ops = {
+ .gdb_bpt_instr = { 0xff },
+ .flags = KGDB_HW_BREAKPOINT,
+};
+
+static const unsigned char mn10300_kgdb_insn_sizes[256] =
+{
+ /* 1 2 3 4 5 6 7 8 9 a b c d e f */
+ 1, 3, 3, 3, 1, 3, 3, 3, 1, 3, 3, 3, 1, 3, 3, 3, /* 0 */
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* 1 */
+ 2, 2, 2, 2, 3, 3, 3, 3, 2, 2, 2, 2, 3, 3, 3, 3, /* 2 */
+ 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 1, 1, 1, 1, /* 3 */
+ 1, 1, 2, 2, 1, 1, 2, 2, 1, 1, 2, 2, 1, 1, 2, 2, /* 4 */
+ 1, 1, 1, 1, 1, 1, 1, 1, 2, 2, 2, 2, 2, 2, 2, 2, /* 5 */
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* 6 */
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* 7 */
+ 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, /* 8 */
+ 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, /* 9 */
+ 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, /* a */
+ 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, /* b */
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 2, 2, /* c */
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* d */
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* e */
+ 0, 2, 2, 2, 2, 2, 2, 4, 0, 3, 0, 4, 0, 6, 7, 1 /* f */
+};
+
+/*
+ * Attempt to emulate single stepping by means of breakpoint instructions.
+ * Although there is a single-step trace flag in EPSW, its use is not
+ * sufficiently documented and is only intended for use with the JTAG debugger.
+ */
+static int kgdb_arch_do_singlestep(struct pt_regs *regs)
+{
+ unsigned long arg;
+ unsigned size;
+ u8 *pc = (u8 *)regs->pc, *sp = (u8 *)(regs + 1), cur;
+ u8 *x = NULL, *y = NULL;
+ int ret;
+
+ ret = probe_kernel_read(&cur, pc, 1);
+ if (ret < 0)
+ return ret;
+
+ size = mn10300_kgdb_insn_sizes[cur];
+ if (size > 0) {
+ x = pc + size;
+ goto set_x;
+ }
+
+ switch (cur) {
+ /* Bxx (d8,PC) */
+ case 0xc0 ... 0xca:
+ ret = probe_kernel_read(&arg, pc + 1, 1);
+ if (ret < 0)
+ return ret;
+ x = pc + 2;
+ if (arg >= 0 && arg <= 2)
+ goto set_x;
+ y = pc + (s8)arg;
+ goto set_x_and_y;
+
+ /* LXX (d8,PC) */
+ case 0xd0 ... 0xda:
+ x = pc + 1;
+ if (regs->pc == regs->lar)
+ goto set_x;
+ y = (u8 *)regs->lar;
+ goto set_x_and_y;
+
+ /* SETLB - loads the next four bytes into the LIR register
+ * (which mustn't include a breakpoint instruction) */
+ case 0xdb:
+ x = pc + 5;
+ goto set_x;
+
+ /* JMP (d16,PC) or CALL (d16,PC) */
+ case 0xcc:
+ case 0xcd:
+ ret = probe_kernel_read(&arg, pc + 1, 2);
+ if (ret < 0)
+ return ret;
+ x = pc + (s16)arg;
+ goto set_x;
+
+ /* JMP (d32,PC) or CALL (d32,PC) */
+ case 0xdc:
+ case 0xdd:
+ ret = probe_kernel_read(&arg, pc + 1, 4);
+ if (ret < 0)
+ return ret;
+ x = pc + (s32)arg;
+ goto set_x;
+
+ /* RETF */
+ case 0xde:
+ x = (u8 *)regs->mdr;
+ goto set_x;
+
+ /* RET */
+ case 0xdf:
+ ret = probe_kernel_read(&arg, pc + 2, 1);
+ if (ret < 0)
+ return ret;
+ ret = probe_kernel_read(&x, sp + (s8)arg, 4);
+ if (ret < 0)
+ return ret;
+ goto set_x;
+
+ case 0xf0:
+ ret = probe_kernel_read(&cur, pc + 1, 1);
+ if (ret < 0)
+ return ret;
+
+ if (cur >= 0xf0 && cur <= 0xf7) {
+ /* JMP (An) / CALLS (An) */
+ switch (cur & 3) {
+ case 0: x = (u8 *)regs->a0; break;
+ case 1: x = (u8 *)regs->a1; break;
+ case 2: x = (u8 *)regs->a2; break;
+ case 3: x = (u8 *)regs->a3; break;
+ }
+ goto set_x;
+ } else if (cur == 0xfc) {
+ /* RETS */
+ ret = probe_kernel_read(&x, sp, 4);
+ if (ret < 0)
+ return ret;
+ goto set_x;
+ } else if (cur == 0xfd) {
+ /* RTI */
+ ret = probe_kernel_read(&x, sp + 4, 4);
+ if (ret < 0)
+ return ret;
+ goto set_x;
+ } else {
+ x = pc + 2;
+ goto set_x;
+ }
+ break;
+
+ /* potential 3-byte conditional branches */
+ case 0xf8:
+ ret = probe_kernel_read(&cur, pc + 1, 1);
+ if (ret < 0)
+ return ret;
+ x = pc + 3;
+
+ if (cur >= 0xe8 && cur <= 0xeb) {
+ ret = probe_kernel_read(&arg, pc + 2, 1);
+ if (ret < 0)
+ return ret;
+ if (arg >= 0 && arg <= 3)
+ goto set_x;
+ y = pc + (s8)arg;
+ goto set_x_and_y;
+ }
+ goto set_x;
+
+ case 0xfa:
+ ret = probe_kernel_read(&cur, pc + 1, 1);
+ if (ret < 0)
+ return ret;
+
+ if (cur == 0xff) {
+ /* CALLS (d16,PC) */
+ ret = probe_kernel_read(&arg, pc + 2, 2);
+ if (ret < 0)
+ return ret;
+ x = pc + (s16)arg;
+ goto set_x;
+ }
+
+ x = pc + 4;
+ goto set_x;
+
+ case 0xfc:
+ ret = probe_kernel_read(&cur, pc + 1, 1);
+ if (ret < 0)
+ return ret;
+
+ if (cur == 0xff) {
+ /* CALLS (d32,PC) */
+ ret = probe_kernel_read(&arg, pc + 2, 4);
+ if (ret < 0)
+ return ret;
+ x = pc + (s32)arg;
+ goto set_x;
+ }
+
+ x = pc + 6;
+ goto set_x;
+ }
+
+ return 0;
+
+set_x:
+ kgdb_sstep_bp_addr[0] = x;
+ kgdb_sstep_bp_addr[1] = NULL;
+ ret = probe_kernel_read(&kgdb_sstep_bp[0], x, 1);
+ if (ret < 0)
+ return ret;
+ ret = probe_kernel_write(x, &arch_kgdb_ops.gdb_bpt_instr, 1);
+ if (ret < 0)
+ return ret;
+ kgdb_sstep_thread = current_thread_info();
+ debugger_local_cache_flushinv_one(x);
+ return ret;
+
+set_x_and_y:
+ kgdb_sstep_bp_addr[0] = x;
+ kgdb_sstep_bp_addr[1] = y;
+ ret = probe_kernel_read(&kgdb_sstep_bp[0], x, 1);
+ if (ret < 0)
+ return ret;
+ ret = probe_kernel_read(&kgdb_sstep_bp[1], y, 1);
+ if (ret < 0)
+ return ret;
+ ret = probe_kernel_write(x, &arch_kgdb_ops.gdb_bpt_instr, 1);
+ if (ret < 0)
+ return ret;
+ ret = probe_kernel_write(y, &arch_kgdb_ops.gdb_bpt_instr, 1);
+ if (ret < 0) {
+ probe_kernel_write(kgdb_sstep_bp_addr[0],
+ &kgdb_sstep_bp[0], 1);
+ } else {
+ kgdb_sstep_thread = current_thread_info();
+ }
+ debugger_local_cache_flushinv_one(x);
+ debugger_local_cache_flushinv_one(y);
+ return ret;
+}
+
+/*
+ * Remove emplaced single-step breakpoints, returning true if we hit one of
+ * them.
+ */
+static bool kgdb_arch_undo_singlestep(struct pt_regs *regs)
+{
+ bool hit = false;
+ u8 *x = kgdb_sstep_bp_addr[0], *y = kgdb_sstep_bp_addr[1];
+ u8 opcode;
+
+ if (kgdb_sstep_thread == current_thread_info()) {
+ if (x) {
+ if (x == (u8 *)regs->pc)
+ hit = true;
+ if (probe_kernel_read(&opcode, x,
+ 1) < 0 ||
+ opcode != 0xff)
+ BUG();
+ probe_kernel_write(x, &kgdb_sstep_bp[0], 1);
+ debugger_local_cache_flushinv_one(x);
+ }
+ if (y) {
+ if (y == (u8 *)regs->pc)
+ hit = true;
+ if (probe_kernel_read(&opcode, y,
+ 1) < 0 ||
+ opcode != 0xff)
+ BUG();
+ probe_kernel_write(y, &kgdb_sstep_bp[1], 1);
+ debugger_local_cache_flushinv_one(y);
+ }
+ }
+
+ kgdb_sstep_bp_addr[0] = NULL;
+ kgdb_sstep_bp_addr[1] = NULL;
+ kgdb_sstep_thread = NULL;
+ return hit;
+}
+
+/*
+ * Catch a single-step-pending thread being deleted and make sure the global
+ * single-step state is cleared. At this point the breakpoints should have
+ * been removed by __switch_to().
+ */
+void free_thread_info(struct thread_info *ti)
+{
+ if (kgdb_sstep_thread == ti) {
+ kgdb_sstep_thread = NULL;
+
+ /* However, we may now be running in degraded mode, with most
+ * of the CPUs disabled until such a time as KGDB is reentered,
+ * so force immediate reentry */
+ kgdb_breakpoint();
+ }
+ kfree(ti);
+}
+
+/*
+ * Handle unknown packets and [CcsDk] packets
+ * - at this point breakpoints have been installed
+ */
+int kgdb_arch_handle_exception(int vector, int signo, int err_code,
+ char *remcom_in_buffer, char *remcom_out_buffer,
+ struct pt_regs *regs)
+{
+ long addr;
+ char *ptr;
+
+ switch (remcom_in_buffer[0]) {
+ case 'c':
+ case 's':
+ /* try to read optional parameter, pc unchanged if no parm */
+ ptr = &remcom_in_buffer[1];
+ if (kgdb_hex2long(&ptr, &addr))
+ regs->pc = addr;
+ case 'D':
+ case 'k':
+ atomic_set(&kgdb_cpu_doing_single_step, -1);
+
+ if (remcom_in_buffer[0] == 's') {
+ kgdb_arch_do_singlestep(regs);
+ kgdb_single_step = 1;
+ atomic_set(&kgdb_cpu_doing_single_step,
+ raw_smp_processor_id());
+ }
+ return 0;
+ }
+ return -1; /* this means that we do not want to exit from the handler */
+}
+
+/*
+ * Handle event interception
+ * - returns 0 if the exception should be skipped, -ERROR otherwise.
+ */
+int debugger_intercept(enum exception_code excep, int signo, int si_code,
+ struct pt_regs *regs)
+{
+ int ret;
+
+ if (kgdb_arch_undo_singlestep(regs)) {
+ excep = EXCEP_TRAP;
+ signo = SIGTRAP;
+ si_code = TRAP_TRACE;
+ }
+
+ ret = kgdb_handle_exception(excep, signo, si_code, regs);
+
+ debugger_local_cache_flushinv();
+
+ return ret;
+}
+
+/*
+ * Determine if we've hit a debugger special breakpoint
+ */
+int at_debugger_breakpoint(struct pt_regs *regs)
+{
+ return regs->pc == (unsigned long)&__arch_kgdb_breakpoint;
+}
+
+/*
+ * Initialise kgdb
+ */
+int kgdb_arch_init(void)
+{
+ return 0;
+}
+
+/*
+ * Do something, perhaps, but don't know what.
+ */
+void kgdb_arch_exit(void)
+{
+}
+
+#ifdef CONFIG_SMP
+void debugger_nmi_interrupt(struct pt_regs *regs, enum exception_code code)
+{
+ kgdb_nmicallback(arch_smp_processor_id(), regs);
+ debugger_local_cache_flushinv();
+}
+
+void kgdb_roundup_cpus(unsigned long flags)
+{
+ smp_jump_to_debugger();
+}
+#endif
diff --git a/arch/mn10300/kernel/mn10300-serial.c b/arch/mn10300/kernel/mn10300-serial.c
index 93c53739cfc..efca426a2ed 100644
--- a/arch/mn10300/kernel/mn10300-serial.c
+++ b/arch/mn10300/kernel/mn10300-serial.c
@@ -119,6 +119,10 @@ static int mn10300_serial_request_port(struct uart_port *);
static void mn10300_serial_config_port(struct uart_port *, int);
static int mn10300_serial_verify_port(struct uart_port *,
struct serial_struct *);
+#ifdef CONFIG_CONSOLE_POLL
+static void mn10300_serial_poll_put_char(struct uart_port *, unsigned char);
+static int mn10300_serial_poll_get_char(struct uart_port *);
+#endif
static const struct uart_ops mn10300_serial_ops = {
.tx_empty = mn10300_serial_tx_empty,
@@ -138,6 +142,10 @@ static const struct uart_ops mn10300_serial_ops = {
.request_port = mn10300_serial_request_port,
.config_port = mn10300_serial_config_port,
.verify_port = mn10300_serial_verify_port,
+#ifdef CONFIG_CONSOLE_POLL
+ .poll_put_char = mn10300_serial_poll_put_char,
+ .poll_get_char = mn10300_serial_poll_get_char,
+#endif
};
static irqreturn_t mn10300_serial_interrupt(int irq, void *dev_id);
@@ -1634,3 +1642,70 @@ static int __init mn10300_serial_console_init(void)
console_initcall(mn10300_serial_console_init);
#endif
+
+#ifdef CONFIG_CONSOLE_POLL
+/*
+ * Polled character reception for the kernel debugger
+ */
+static int mn10300_serial_poll_get_char(struct uart_port *_port)
+{
+ struct mn10300_serial_port *port =
+ container_of(_port, struct mn10300_serial_port, uart);
+ unsigned ix;
+ u8 st, ch;
+
+ _enter("%s", port->name);
+
+ do {
+ /* pull chars out of the hat */
+ ix = port->rx_outp;
+ if (ix == port->rx_inp)
+ return NO_POLL_CHAR;
+
+ ch = port->rx_buffer[ix++];
+ st = port->rx_buffer[ix++];
+ smp_rmb();
+ port->rx_outp = ix & (MNSC_BUFFER_SIZE - 1);
+
+ } while (st & (SC01STR_FEF | SC01STR_PEF | SC01STR_OEF));
+
+ return ch;
+}
+
+
+/*
+ * Polled character transmission for the kernel debugger
+ */
+static void mn10300_serial_poll_put_char(struct uart_port *_port,
+ unsigned char ch)
+{
+ struct mn10300_serial_port *port =
+ container_of(_port, struct mn10300_serial_port, uart);
+ u8 intr, tmp;
+
+ /* wait for the transmitter to finish anything it might be doing (and
+ * this includes the virtual DMA handler, so it might take a while) */
+ while (*port->_status & (SC01STR_TBF | SC01STR_TXF))
+ continue;
+
+ /* disable the Tx ready interrupt */
+ intr = *port->_intr;
+ *port->_intr = intr & ~SC01ICR_TI;
+ tmp = *port->_intr;
+
+ if (ch == 0x0a) {
+ *(u8 *) port->_txb = 0x0d;
+ while (*port->_status & SC01STR_TBF)
+ continue;
+ }
+
+ *(u8 *) port->_txb = ch;
+ while (*port->_status & SC01STR_TBF)
+ continue;
+
+ /* restore the Tx interrupt flag */
+ *port->_intr = intr;
+ tmp = *port->_intr;
+}
+
+#endif /* CONFIG_CONSOLE_POLL */
diff --git a/arch/mn10300/kernel/process.c b/arch/mn10300/kernel/process.c
index e1b14a6ed54..28eec310253 100644
--- a/arch/mn10300/kernel/process.c
+++ b/arch/mn10300/kernel/process.c
@@ -135,7 +135,7 @@ void release_segments(struct mm_struct *mm)
void machine_restart(char *cmd)
{
-#ifdef CONFIG_GDBSTUB
+#ifdef CONFIG_KERNEL_DEBUGGER
gdbstub_exit(0);
#endif
@@ -148,14 +148,14 @@ void machine_restart(char *cmd)
void machine_halt(void)
{
-#ifdef CONFIG_GDBSTUB
+#ifdef CONFIG_KERNEL_DEBUGGER
gdbstub_exit(0);
#endif
}
void machine_power_off(void)
{
-#ifdef CONFIG_GDBSTUB
+#ifdef CONFIG_KERNEL_DEBUGGER
gdbstub_exit(0);
#endif
}
diff --git a/arch/mn10300/kernel/smp.c b/arch/mn10300/kernel/smp.c
index 1ebb79f1650..51c02f97dce 100644
--- a/arch/mn10300/kernel/smp.c
+++ b/arch/mn10300/kernel/smp.c
@@ -440,6 +440,22 @@ int smp_nmi_call_function(smp_call_func_t func, void *info, int wait)
}
/**
+ * smp_jump_to_debugger - Make other CPUs enter the debugger by sending an IPI
+ *
+ * Send a non-maskable request to all other CPUs in the system, instructing
+ * them to jump into the debugger. The caller is responsible for checking that
+ * the other CPUs responded to the instruction.
+ *
+ * The caller should make sure that this CPU's debugger IPI is disabled.
+ */
+void smp_jump_to_debugger(void)
+{
+ if (num_online_cpus() > 1)
+ /* Send a message to all other CPUs */
+ send_IPI_allbutself(DEBUGGER_NMI_IPI);
+}
+
+/**
* stop_this_cpu - Callback to stop a CPU.
* @unused: Callback context (ignored).
*/
@@ -603,7 +619,7 @@ static void __init smp_cpu_init(void)
/**
* smp_prepare_cpu_init - Initialise CPU in startup_secondary
*
- * Set interrupt level 0-6 setting and init ICR of gdbstub.
+ * Set interrupt level 0-6 setting and init ICR of the kernel debugger.
*/
void smp_prepare_cpu_init(void)
{
@@ -622,15 +638,15 @@ void smp_prepare_cpu_init(void)
for (loop = 0; loop < GxICR_NUM_IRQS; loop++)
GxICR(loop) = GxICR_LEVEL_6 | GxICR_DETECT;
-#ifdef CONFIG_GDBSTUB
- /* initialise GDB-stub */
+#ifdef CONFIG_KERNEL_DEBUGGER
+ /* initialise the kernel debugger interrupt */
do {
unsigned long flags;
u16 tmp16;
flags = arch_local_cli_save();
- GxICR(GDB_NMI_IPI) = GxICR_NMI | GxICR_ENABLE | GxICR_DETECT;
- tmp16 = GxICR(GDB_NMI_IPI);
+ GxICR(DEBUGGER_NMI_IPI) = GxICR_NMI | GxICR_ENABLE | GxICR_DETECT;
+ tmp16 = GxICR(DEBUGGER_NMI_IPI);
arch_local_irq_restore(flags);
} while (0);
#endif
diff --git a/arch/mn10300/kernel/switch_to.S b/arch/mn10300/kernel/switch_to.S
index 9074d0fb878..de3e74fc9ea 100644
--- a/arch/mn10300/kernel/switch_to.S
+++ b/arch/mn10300/kernel/switch_to.S
@@ -39,11 +39,17 @@ ENTRY(__switch_to)
# save prev context
mov __switch_back,d0
- mov d0,(THREAD_PC,a0)
mov sp,a2
mov a2,(THREAD_SP,a0)
mov a3,(THREAD_A3,a0)
+#ifdef CONFIG_KGDB
+ btst 0xff,(kgdb_single_step)
+ bne __switch_to__lift_sstep_bp
+__switch_to__continue:
+#endif
+ mov d0,(THREAD_PC,a0)
+
mov (THREAD_A3,a1),a3
mov (THREAD_SP,a1),a2
@@ -68,3 +74,106 @@ ENTRY(__switch_to)
__switch_back:
and ~EPSW_NMID,epsw
ret [d2,d3,a2,a3,exreg1],32
+
+#ifdef CONFIG_KGDB
+###############################################################################
+#
+# Lift the single-step breakpoints when the task being traced is switched out
+# A0 = prev
+# A1 = next
+#
+###############################################################################
+__switch_to__lift_sstep_bp:
+ add -12,sp
+ mov a0,e4
+ mov a1,e5
+
+ # Clear the single-step flag to prevent us coming this way until we get
+ # switched back in
+ bclr 0xff,(kgdb_single_step)
+
+ # Remove first breakpoint
+ mov (kgdb_sstep_bp_addr),a2
+ cmp 0,a2
+ beq 1f
+ movbu (kgdb_sstep_bp),d0
+ movbu d0,(a2)
+#if defined(CONFIG_MN10300_CACHE_FLUSH_ICACHE) || defined(CONFIG_MN10300_CACHE_INV_ICACHE)
+ mov a2,d0
+ mov a2,d1
+ add 1,d1
+ calls flush_icache_range
+#endif
+1:
+
+ # Remove second breakpoint
+ mov (kgdb_sstep_bp_addr+4),a2
+ cmp 0,a2
+ beq 2f
+ movbu (kgdb_sstep_bp+1),d0
+ movbu d0,(a2)
+#if defined(CONFIG_MN10300_CACHE_FLUSH_ICACHE) || defined(CONFIG_MN10300_CACHE_INV_ICACHE)
+ mov a2,d0
+ mov a2,d1
+ add 1,d1
+ calls flush_icache_range
+#endif
+2:
+
+ # Change the resumption address and return
+ mov __switch_back__reinstall_sstep_bp,d0
+ mov e4,a0
+ mov e5,a1
+ add 12,sp
+ bra __switch_to__continue
+
+###############################################################################
+#
+# Reinstall the single-step breakpoints when the task being traced is switched
+# back in (A1 points to the new thread_struct).
+#
+###############################################################################
+__switch_back__reinstall_sstep_bp:
+ add -12,sp
+ mov a0,e4 # save the return value
+ mov 0xff,d3
+
+ # Reinstall first breakpoint
+ mov (kgdb_sstep_bp_addr),a2
+ cmp 0,a2
+ beq 1f
+ movbu (a2),d0
+ movbu d0,(kgdb_sstep_bp)
+ movbu d3,(a2)
+#if defined(CONFIG_MN10300_CACHE_FLUSH_ICACHE) || defined(CONFIG_MN10300_CACHE_INV_ICACHE)
+ mov a2,d0
+ mov a2,d1
+ add 1,d1
+ calls flush_icache_range
+#endif
+1:
+
+ # Reinstall second breakpoint
+ mov (kgdb_sstep_bp_addr+4),a2
+ cmp 0,a2
+ beq 2f
+ movbu (a2),d0
+ movbu d0,(kgdb_sstep_bp+1)
+ movbu d3,(a2)
+#if defined(CONFIG_MN10300_CACHE_FLUSH_ICACHE) || defined(CONFIG_MN10300_CACHE_INV_ICACHE)
+ mov a2,d0
+ mov a2,d1
+ add 1,d1
+ calls flush_icache_range
+#endif
+2:
+
+ mov d3,(kgdb_single_step)
+
+ # Restore the return value (the previous thread_struct pointer)
+ mov e4,a0
+ mov a0,d0
+ add 12,sp
+ bra __switch_back
+
+#endif /* CONFIG_KGDB */
diff --git a/arch/mn10300/kernel/traps.c b/arch/mn10300/kernel/traps.c
index b90c3f160c7..f03cb278828 100644
--- a/arch/mn10300/kernel/traps.c
+++ b/arch/mn10300/kernel/traps.c
@@ -38,8 +38,9 @@
#include <asm/busctl-regs.h>
#include <unit/leds.h>
#include <asm/fpu.h>
-#include <asm/gdb-stub.h>
#include <asm/sections.h>
+#include <asm/debugger.h>
+#include "internal.h"
#if (CONFIG_INTERRUPT_VECTOR_BASE & 0xffffff)
#error "INTERRUPT_VECTOR_BASE not aligned to 16MiB boundary!"
@@ -49,63 +50,169 @@ int kstack_depth_to_print = 24;
spinlock_t die_lock = __SPIN_LOCK_UNLOCKED(die_lock);
-ATOMIC_NOTIFIER_HEAD(mn10300_die_chain);
+struct exception_to_signal_map {
+ u8 signo;
+ u32 si_code;
+};
+
+static const struct exception_to_signal_map exception_to_signal_map[256] = {
+ /* MMU exceptions */
+ [EXCEP_ITLBMISS >> 3] = { 0, 0 },
+ [EXCEP_DTLBMISS >> 3] = { 0, 0 },
+ [EXCEP_IAERROR >> 3] = { 0, 0 },
+ [EXCEP_DAERROR >> 3] = { 0, 0 },
+
+ /* system exceptions */
+ [EXCEP_TRAP >> 3] = { SIGTRAP, TRAP_BRKPT },
+ [EXCEP_ISTEP >> 3] = { SIGTRAP, TRAP_TRACE }, /* Monitor */
+ [EXCEP_IBREAK >> 3] = { SIGTRAP, TRAP_HWBKPT }, /* Monitor */
+ [EXCEP_OBREAK >> 3] = { SIGTRAP, TRAP_HWBKPT }, /* Monitor */
+ [EXCEP_PRIVINS >> 3] = { SIGILL, ILL_PRVOPC },
+ [EXCEP_UNIMPINS >> 3] = { SIGILL, ILL_ILLOPC },
+ [EXCEP_UNIMPEXINS >> 3] = { SIGILL, ILL_ILLOPC },
+ [EXCEP_MEMERR >> 3] = { SIGSEGV, SEGV_ACCERR },
+ [EXCEP_MISALIGN >> 3] = { SIGBUS, BUS_ADRALN },
+ [EXCEP_BUSERROR >> 3] = { SIGBUS, BUS_ADRERR },
+ [EXCEP_ILLINSACC >> 3] = { SIGSEGV, SEGV_ACCERR },
+ [EXCEP_ILLDATACC >> 3] = { SIGSEGV, SEGV_ACCERR },
+ [EXCEP_IOINSACC >> 3] = { SIGSEGV, SEGV_ACCERR },
+ [EXCEP_PRIVINSACC >> 3] = { SIGSEGV, SEGV_ACCERR }, /* userspace */
+ [EXCEP_PRIVDATACC >> 3] = { SIGSEGV, SEGV_ACCERR }, /* userspace */
+ [EXCEP_DATINSACC >> 3] = { SIGSEGV, SEGV_ACCERR },
+ [EXCEP_DOUBLE_FAULT >> 3] = { SIGILL, ILL_BADSTK },
+
+ /* FPU exceptions */
+ [EXCEP_FPU_DISABLED >> 3] = { SIGILL, ILL_COPROC },
+ [EXCEP_FPU_UNIMPINS >> 3] = { SIGILL, ILL_COPROC },
+ [EXCEP_FPU_OPERATION >> 3] = { SIGFPE, FPE_INTDIV },
+
+ /* interrupts */
+ [EXCEP_WDT >> 3] = { SIGALRM, 0 },
+ [EXCEP_NMI >> 3] = { SIGQUIT, 0 },
+ [EXCEP_IRQ_LEVEL0 >> 3] = { SIGINT, 0 },
+ [EXCEP_IRQ_LEVEL1 >> 3] = { 0, 0 },
+ [EXCEP_IRQ_LEVEL2 >> 3] = { 0, 0 },
+ [EXCEP_IRQ_LEVEL3 >> 3] = { 0, 0 },
+ [EXCEP_IRQ_LEVEL4 >> 3] = { 0, 0 },
+ [EXCEP_IRQ_LEVEL5 >> 3] = { 0, 0 },
+ [EXCEP_IRQ_LEVEL6 >> 3] = { 0, 0 },
+
+ /* system calls */
+ [EXCEP_SYSCALL0 >> 3] = { 0, 0 },
+ [EXCEP_SYSCALL1 >> 3] = { SIGILL, ILL_ILLTRP },
+ [EXCEP_SYSCALL2 >> 3] = { SIGILL, ILL_ILLTRP },
+ [EXCEP_SYSCALL3 >> 3] = { SIGILL, ILL_ILLTRP },
+ [EXCEP_SYSCALL4 >> 3] = { SIGILL, ILL_ILLTRP },
+ [EXCEP_SYSCALL5 >> 3] = { SIGILL, ILL_ILLTRP },
+ [EXCEP_SYSCALL6 >> 3] = { SIGILL, ILL_ILLTRP },
+ [EXCEP_SYSCALL7 >> 3] = { SIGILL, ILL_ILLTRP },
+ [EXCEP_SYSCALL8 >> 3] = { SIGILL, ILL_ILLTRP },
+ [EXCEP_SYSCALL9 >> 3] = { SIGILL, ILL_ILLTRP },
+ [EXCEP_SYSCALL10 >> 3] = { SIGILL, ILL_ILLTRP },
+ [EXCEP_SYSCALL11 >> 3] = { SIGILL, ILL_ILLTRP },
+ [EXCEP_SYSCALL12 >> 3] = { SIGILL, ILL_ILLTRP },
+ [EXCEP_SYSCALL13 >> 3] = { SIGILL, ILL_ILLTRP },
+ [EXCEP_SYSCALL14 >> 3] = { SIGILL, ILL_ILLTRP },
+ [EXCEP_SYSCALL15 >> 3] = { SIGABRT, 0 },
+};
/*
- * These constants are for searching for possible module text
- * segments. MODULE_RANGE is a guess of how much space is likely
- * to be vmalloced.
+ * Handle kernel exceptions.
+ *
+ * See if there's a fixup handler we can force a jump to when an exception
+ * happens due to something kernel code did
*/
-#define MODULE_RANGE (8 * 1024 * 1024)
-
-#define DO_ERROR(signr, prologue, str, name) \
-asmlinkage void name(struct pt_regs *regs, u32 intcode) \
-{ \
- prologue; \
- if (die_if_no_fixup(str, regs, intcode)) \
- return; \
- force_sig(signr, current); \
-}
+int die_if_no_fixup(const char *str, struct pt_regs *regs,
+ enum exception_code code)
+{
+ u8 opcode;
+ int signo, si_code;
+
+ if (user_mode(regs))
+ return 0;
+
+ peripheral_leds_display_exception(code);
+
+ signo = exception_to_signal_map[code >> 3].signo;
+ si_code = exception_to_signal_map[code >> 3].si_code;
+
+ switch (code) {
+ /* see if we can fixup the kernel accessing memory */
+ case EXCEP_ITLBMISS:
+ case EXCEP_DTLBMISS:
+ case EXCEP_IAERROR:
+ case EXCEP_DAERROR:
+ case EXCEP_MEMERR:
+ case EXCEP_MISALIGN:
+ case EXCEP_BUSERROR:
+ case EXCEP_ILLDATACC:
+ case EXCEP_IOINSACC:
+ case EXCEP_PRIVINSACC:
+ case EXCEP_PRIVDATACC:
+ case EXCEP_DATINSACC:
+ if (fixup_exception(regs))
+ return 1;
+ break;
-#define DO_EINFO(signr, prologue, str, name, sicode) \
-asmlinkage void name(struct pt_regs *regs, u32 intcode) \
-{ \
- siginfo_t info; \
- prologue; \
- if (die_if_no_fixup(str, regs, intcode)) \
- return; \
- info.si_signo = signr; \
- if (signr == SIGILL && sicode == ILL_ILLOPC) { \
- uint8_t opcode; \
- if (get_user(opcode, (uint8_t __user *)regs->pc) == 0) \
- if (opcode == 0xff) \
- info.si_signo = SIGTRAP; \
- } \
- info.si_errno = 0; \
- info.si_code = sicode; \
- info.si_addr = (void *) regs->pc; \
- force_sig_info(info.si_signo, &info, current); \
+ case EXCEP_TRAP:
+ case EXCEP_UNIMPINS:
+ if (get_user(opcode, (uint8_t __user *)regs->pc) != 0)
+ break;
+ if (opcode == 0xff) {
+ if (notify_die(DIE_BREAKPOINT, str, regs, code, 0, 0))
+ return 1;
+ if (at_debugger_breakpoint(regs))
+ regs->pc++;
+ signo = SIGTRAP;
+ si_code = TRAP_BRKPT;
+ }
+ break;
+
+ case EXCEP_SYSCALL1 ... EXCEP_SYSCALL14:
+ /* syscall return addr is _after_ the instruction */
+ regs->pc -= 2;
+ break;
+
+ case EXCEP_SYSCALL15:
+ if (report_bug(regs->pc, regs) == BUG_TRAP_TYPE_WARN)
+ return 1;
+
+ /* syscall return addr is _after_ the instruction */
+ regs->pc -= 2;
+ break;
+
+ default:
+ break;
+ }
+
+ if (debugger_intercept(code, signo, si_code, regs) == 0)
+ return 1;
+
+ if (notify_die(DIE_GPF, str, regs, code, 0, 0))
+ return 1;
+
+ /* make the process die as the last resort */
+ die(str, regs, code);
}
-DO_ERROR(SIGTRAP, {}, "trap", trap);
-DO_ERROR(SIGSEGV, {}, "ibreak", ibreak);
-DO_ERROR(SIGSEGV, {}, "obreak", obreak);
-DO_EINFO(SIGSEGV, {}, "access error", access_error, SEGV_ACCERR);
-DO_EINFO(SIGSEGV, {}, "insn access error", insn_acc_error, SEGV_ACCERR);
-DO_EINFO(SIGSEGV, {}, "data access error", data_acc_error, SEGV_ACCERR);
-DO_EINFO(SIGILL, {}, "privileged opcode", priv_op, ILL_PRVOPC);
-DO_EINFO(SIGILL, {}, "invalid opcode", invalid_op, ILL_ILLOPC);
-DO_EINFO(SIGILL, {}, "invalid ex opcode", invalid_exop, ILL_ILLOPC);
-DO_EINFO(SIGBUS, {}, "invalid address", mem_error, BUS_ADRERR);
-DO_EINFO(SIGBUS, {}, "bus error", bus_error, BUS_ADRERR);
-
-DO_ERROR(SIGTRAP,
-#ifndef CONFIG_MN10300_USING_JTAG
- DCR &= ~0x0001,
-#else
- {},
-#endif
- "single step", istep);
+/*
+ * General exception handler
+ */
+asmlinkage void handle_exception(struct pt_regs *regs, u32 intcode)
+{
+ siginfo_t info;
+
+ /* deal with kernel exceptions here */
+ if (die_if_no_fixup(NULL, regs, intcode))
+ return;
+
+ /* otherwise it's a userspace exception */
+ info.si_signo = exception_to_signal_map[intcode >> 3].signo;
+ info.si_code = exception_to_signal_map[intcode >> 3].si_code;
+ info.si_errno = 0;
+ info.si_addr = (void *) regs->pc;
+ force_sig_info(info.si_signo, &info, current);
+}
/*
* handle NMI
@@ -113,10 +220,8 @@ DO_ERROR(SIGTRAP,
asmlinkage void nmi(struct pt_regs *regs, enum exception_code code)
{
/* see if gdbstub wants to deal with it */
-#ifdef CONFIG_GDBSTUB
- if (gdbstub_intercept(regs, code))
+ if (debugger_intercept(code, SIGQUIT, 0, regs))
return;
-#endif
printk(KERN_WARNING "--- Register Dump ---\n");
show_registers(regs);
@@ -128,29 +233,36 @@ asmlinkage void nmi(struct pt_regs *regs, enum exception_code code)
*/
void show_trace(unsigned long *sp)
{
- unsigned long *stack, addr, module_start, module_end;
- int i;
-
- printk(KERN_EMERG "\nCall Trace:");
-
- stack = sp;
- i = 0;
- module_start = VMALLOC_START;
- module_end = VMALLOC_END;
+ unsigned long bottom, stack, addr, fp, raslot;
+
+ printk(KERN_EMERG "\nCall Trace:\n");
+
+ //stack = (unsigned long)sp;
+ asm("mov sp,%0" : "=a"(stack));
+ asm("mov a3,%0" : "=r"(fp));
+
+ raslot = ULONG_MAX;
+ bottom = (stack + THREAD_SIZE) & ~(THREAD_SIZE - 1);
+ for (; stack < bottom; stack += sizeof(addr)) {
+ addr = *(unsigned long *)stack;
+ if (stack == fp) {
+ if (addr > stack && addr < bottom) {
+ fp = addr;
+ raslot = stack + sizeof(addr);
+ continue;
+ }
+ fp = 0;
+ raslot = ULONG_MAX;
+ }
- while (((long) stack & (THREAD_SIZE - 1)) != 0) {
- addr = *stack++;
if (__kernel_text_address(addr)) {
-#if 1
printk(" [<%08lx>]", addr);
+ if (stack >= raslot)
+ raslot = ULONG_MAX;
+ else
+ printk(" ?");
print_symbol(" %s", addr);
printk("\n");
-#else
- if ((i % 6) == 0)
- printk(KERN_EMERG " ");
- printk("[<%08lx>] ", addr);
- i++;
-#endif
}
}
@@ -323,86 +435,6 @@ void die(const char *str, struct pt_regs *regs, enum exception_code code)
}
/*
- * see if there's a fixup handler we can force a jump to when an exception
- * happens due to something kernel code did
- */
-int die_if_no_fixup(const char *str, struct pt_regs *regs,
- enum exception_code code)
-{
- if (user_mode(regs))
- return 0;
-
- peripheral_leds_display_exception(code);
-
- switch (code) {
- /* see if we can fixup the kernel accessing memory */
- case EXCEP_ITLBMISS:
- case EXCEP_DTLBMISS:
- case EXCEP_IAERROR:
- case EXCEP_DAERROR:
- case EXCEP_MEMERR:
- case EXCEP_MISALIGN:
- case EXCEP_BUSERROR:
- case EXCEP_ILLDATACC:
- case EXCEP_IOINSACC:
- case EXCEP_PRIVINSACC:
- case EXCEP_PRIVDATACC:
- case EXCEP_DATINSACC:
- if (fixup_exception(regs))
- return 1;
- case EXCEP_UNIMPINS:
- if (regs->pc && *(uint8_t *)regs->pc == 0xff)
- if (notify_die(DIE_BREAKPOINT, str, regs, code, 0, 0))
- return 1;
- break;
- default:
- break;
- }
-
- /* see if gdbstub wants to deal with it */
-#ifdef CONFIG_GDBSTUB
- if (gdbstub_intercept(regs, code))
- return 1;
-#endif
-
- if (notify_die(DIE_GPF, str, regs, code, 0, 0))
- return 1;
-
- /* make the process die as the last resort */
- die(str, regs, code);
-}
-
-/*
- * handle unsupported syscall instructions (syscall 1-15)
- */
-static asmlinkage void unsupported_syscall(struct pt_regs *regs,
- enum exception_code code)
-{
- struct task_struct *tsk = current;
- siginfo_t info;
-
- /* catch a kernel BUG() */
- if (code == EXCEP_SYSCALL15 && !user_mode(regs)) {
- if (report_bug(regs->pc, regs) == BUG_TRAP_TYPE_BUG) {
-#ifdef CONFIG_GDBSTUB
- gdbstub_intercept(regs, code);
-#endif
- }
- }
-
- regs->pc -= 2; /* syscall return addr is _after_ the instruction */
-
- die_if_no_fixup("An unsupported syscall insn was used by the kernel\n",
- regs, code);
-
- info.si_signo = SIGILL;
- info.si_errno = ENOSYS;
- info.si_code = ILL_ILLTRP;
- info.si_addr = (void *) regs->pc;
- force_sig_info(SIGILL, &info, tsk);
-}
-
-/*
* display the register file when the stack pointer gets clobbered
*/
asmlinkage void do_double_fault(struct pt_regs *regs)
@@ -481,10 +513,8 @@ asmlinkage void uninitialised_exception(struct pt_regs *regs,
{
/* see if gdbstub wants to deal with it */
-#ifdef CONFIG_GDBSTUB
- if (gdbstub_intercept(regs, code))
+ if (debugger_intercept(code, SIGSYS, 0, regs) == 0)
return;
-#endif
peripheral_leds_display_exception(code);
printk(KERN_EMERG "Uninitialised Exception 0x%04x\n", code & 0xFFFF);
@@ -549,43 +579,43 @@ void __init set_intr_stub(enum exception_code code, void *handler)
*/
void __init trap_init(void)
{
- set_excp_vector(EXCEP_TRAP, trap);
- set_excp_vector(EXCEP_ISTEP, istep);
- set_excp_vector(EXCEP_IBREAK, ibreak);
- set_excp_vector(EXCEP_OBREAK, obreak);
-
- set_excp_vector(EXCEP_PRIVINS, priv_op);
- set_excp_vector(EXCEP_UNIMPINS, invalid_op);
- set_excp_vector(EXCEP_UNIMPEXINS, invalid_exop);
- set_excp_vector(EXCEP_MEMERR, mem_error);
+ set_excp_vector(EXCEP_TRAP, handle_exception);
+ set_excp_vector(EXCEP_ISTEP, handle_exception);
+ set_excp_vector(EXCEP_IBREAK, handle_exception);
+ set_excp_vector(EXCEP_OBREAK, handle_exception);
+
+ set_excp_vector(EXCEP_PRIVINS, handle_exception);
+ set_excp_vector(EXCEP_UNIMPINS, handle_exception);
+ set_excp_vector(EXCEP_UNIMPEXINS, handle_exception);
+ set_excp_vector(EXCEP_MEMERR, handle_exception);
set_excp_vector(EXCEP_MISALIGN, misalignment);
- set_excp_vector(EXCEP_BUSERROR, bus_error);
- set_excp_vector(EXCEP_ILLINSACC, insn_acc_error);
- set_excp_vector(EXCEP_ILLDATACC, data_acc_error);
- set_excp_vector(EXCEP_IOINSACC, insn_acc_error);
- set_excp_vector(EXCEP_PRIVINSACC, insn_acc_error);
- set_excp_vector(EXCEP_PRIVDATACC, data_acc_error);
- set_excp_vector(EXCEP_DATINSACC, insn_acc_error);
- set_excp_vector(EXCEP_FPU_UNIMPINS, fpu_invalid_op);
+ set_excp_vector(EXCEP_BUSERROR, handle_exception);
+ set_excp_vector(EXCEP_ILLINSACC, handle_exception);
+ set_excp_vector(EXCEP_ILLDATACC, handle_exception);
+ set_excp_vector(EXCEP_IOINSACC, handle_exception);
+ set_excp_vector(EXCEP_PRIVINSACC, handle_exception);
+ set_excp_vector(EXCEP_PRIVDATACC, handle_exception);
+ set_excp_vector(EXCEP_DATINSACC, handle_exception);
+ set_excp_vector(EXCEP_FPU_UNIMPINS, handle_exception);
set_excp_vector(EXCEP_FPU_OPERATION, fpu_exception);
set_excp_vector(EXCEP_NMI, nmi);
- set_excp_vector(EXCEP_SYSCALL1, unsupported_syscall);
- set_excp_vector(EXCEP_SYSCALL2, unsupported_syscall);
- set_excp_vector(EXCEP_SYSCALL3, unsupported_syscall);
- set_excp_vector(EXCEP_SYSCALL4, unsupported_syscall);
- set_excp_vector(EXCEP_SYSCALL5, unsupported_syscall);
- set_excp_vector(EXCEP_SYSCALL6, unsupported_syscall);
- set_excp_vector(EXCEP_SYSCALL7, unsupported_syscall);
- set_excp_vector(EXCEP_SYSCALL8, unsupported_syscall);
- set_excp_vector(EXCEP_SYSCALL9, unsupported_syscall);
- set_excp_vector(EXCEP_SYSCALL10, unsupported_syscall);
- set_excp_vector(EXCEP_SYSCALL11, unsupported_syscall);
- set_excp_vector(EXCEP_SYSCALL12, unsupported_syscall);
- set_excp_vector(EXCEP_SYSCALL13, unsupported_syscall);
- set_excp_vector(EXCEP_SYSCALL14, unsupported_syscall);
- set_excp_vector(EXCEP_SYSCALL15, unsupported_syscall);
+ set_excp_vector(EXCEP_SYSCALL1, handle_exception);
+ set_excp_vector(EXCEP_SYSCALL2, handle_exception);
+ set_excp_vector(EXCEP_SYSCALL3, handle_exception);
+ set_excp_vector(EXCEP_SYSCALL4, handle_exception);
+ set_excp_vector(EXCEP_SYSCALL5, handle_exception);
+ set_excp_vector(EXCEP_SYSCALL6, handle_exception);
+ set_excp_vector(EXCEP_SYSCALL7, handle_exception);
+ set_excp_vector(EXCEP_SYSCALL8, handle_exception);
+ set_excp_vector(EXCEP_SYSCALL9, handle_exception);
+ set_excp_vector(EXCEP_SYSCALL10, handle_exception);
+ set_excp_vector(EXCEP_SYSCALL11, handle_exception);
+ set_excp_vector(EXCEP_SYSCALL12, handle_exception);
+ set_excp_vector(EXCEP_SYSCALL13, handle_exception);
+ set_excp_vector(EXCEP_SYSCALL14, handle_exception);
+ set_excp_vector(EXCEP_SYSCALL15, handle_exception);
}
/*
diff --git a/arch/mn10300/mm/Kconfig.cache b/arch/mn10300/mm/Kconfig.cache
index c4fd923a55a..bfbe52691f2 100644
--- a/arch/mn10300/mm/Kconfig.cache
+++ b/arch/mn10300/mm/Kconfig.cache
@@ -99,3 +99,49 @@ config MN10300_CACHE_INV_ICACHE
help
Set if we need the icache to be invalidated, even if the dcache is in
write-through mode and doesn't need flushing.
+
+#
+# The kernel debugger gets its own separate cache flushing functions
+#
+config MN10300_DEBUGGER_CACHE_FLUSH_BY_TAG
+ def_bool y if KERNEL_DEBUGGER && \
+ MN10300_CACHE_WBACK && \
+ !MN10300_CACHE_SNOOP && \
+ MN10300_CACHE_MANAGE_BY_TAG
+ help
+ Set if the debugger needs to flush the dcache and invalidate the
+ icache using the cache tag registers to make breakpoints work.
+
+config MN10300_DEBUGGER_CACHE_FLUSH_BY_REG
+ def_bool y if KERNEL_DEBUGGER && \
+ MN10300_CACHE_WBACK && \
+ !MN10300_CACHE_SNOOP && \
+ MN10300_CACHE_MANAGE_BY_REG
+ help
+ Set if the debugger needs to flush the dcache and invalidate the
+ icache using automatic purge registers to make breakpoints work.
+
+config MN10300_DEBUGGER_CACHE_INV_BY_TAG
+ def_bool y if KERNEL_DEBUGGER && \
+ MN10300_CACHE_WTHRU && \
+ !MN10300_CACHE_SNOOP && \
+ MN10300_CACHE_MANAGE_BY_TAG
+ help
+ Set if the debugger needs to invalidate the icache using the cache
+ tag registers to make breakpoints work.
+
+config MN10300_DEBUGGER_CACHE_INV_BY_REG
+ def_bool y if KERNEL_DEBUGGER && \
+ MN10300_CACHE_WTHRU && \
+ !MN10300_CACHE_SNOOP && \
+ MN10300_CACHE_MANAGE_BY_REG
+ help
+ Set if the debugger needs to invalidate the icache using automatic
+ purge registers to make breakpoints work.
+
+config MN10300_DEBUGGER_CACHE_NO_FLUSH
+ def_bool y if KERNEL_DEBUGGER && \
+ (MN10300_CACHE_DISABLED || MN10300_CACHE_SNOOP)
+ help
+ Set if the debugger does not need to flush the dcache and/or
+ invalidate the icache to make breakpoints work.
diff --git a/arch/mn10300/mm/Makefile b/arch/mn10300/mm/Makefile
index 203fee23f7d..11f38466ac2 100644
--- a/arch/mn10300/mm/Makefile
+++ b/arch/mn10300/mm/Makefile
@@ -13,6 +13,15 @@ cacheflush-$(CONFIG_MN10300_CACHE_INV_BY_REG) += cache-inv-by-reg.o
cacheflush-$(CONFIG_MN10300_CACHE_FLUSH_BY_TAG) += cache-flush-by-tag.o
cacheflush-$(CONFIG_MN10300_CACHE_FLUSH_BY_REG) += cache-flush-by-reg.o
+cacheflush-$(CONFIG_MN10300_DEBUGGER_CACHE_FLUSH_BY_TAG) += \
+ cache-dbg-flush-by-tag.o cache-dbg-inv-by-tag.o
+cacheflush-$(CONFIG_MN10300_DEBUGGER_CACHE_FLUSH_BY_REG) += \
+ cache-dbg-flush-by-reg.o
+cacheflush-$(CONFIG_MN10300_DEBUGGER_CACHE_INV_BY_TAG) += \
+ cache-dbg-inv-by-tag.o cache-dbg-inv.o
+cacheflush-$(CONFIG_MN10300_DEBUGGER_CACHE_INV_BY_REG) += \
+ cache-dbg-inv-by-reg.o cache-dbg-inv.o
+
cacheflush-$(CONFIG_MN10300_CACHE_DISABLED) := cache-disabled.o
obj-y := \
diff --git a/arch/mn10300/mm/cache-dbg-flush-by-reg.S b/arch/mn10300/mm/cache-dbg-flush-by-reg.S
new file mode 100644
index 00000000000..665919f2ab6
--- /dev/null
+++ b/arch/mn10300/mm/cache-dbg-flush-by-reg.S
@@ -0,0 +1,160 @@
+/* MN10300 CPU cache invalidation routines, using automatic purge registers
+ *
+ * Copyright (C) 2011 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/smp.h>
+#include <asm/page.h>
+#include <asm/cache.h>
+#include <asm/irqflags.h>
+#include <asm/cacheflush.h>
+#include "cache.inc"
+
+ .am33_2
+
+###############################################################################
+#
+# void debugger_local_cache_flushinv(void)
+# Flush the entire data cache back to RAM and invalidate the icache
+#
+###############################################################################
+ ALIGN
+ .globl debugger_local_cache_flushinv
+ .type debugger_local_cache_flushinv,@function
+debugger_local_cache_flushinv:
+ #
+ # firstly flush the dcache
+ #
+ movhu (CHCTR),d0
+ btst CHCTR_DCEN|CHCTR_ICEN,d0
+ beq debugger_local_cache_flushinv_end
+
+ mov DCPGCR,a0
+
+ mov epsw,d1
+ and ~EPSW_IE,epsw
+ or EPSW_NMID,epsw
+ nop
+
+ btst CHCTR_DCEN,d0
+ beq debugger_local_cache_flushinv_no_dcache
+
+ # wait for busy bit of area purge
+ setlb
+ mov (a0),d0
+ btst DCPGCR_DCPGBSY,d0
+ lne
+
+ # set mask
+ clr d0
+ mov d0,(DCPGMR)
+
+ # area purge
+ #
+ # DCPGCR = DCPGCR_DCP
+ #
+ mov DCPGCR_DCP,d0
+ mov d0,(a0)
+
+ # wait for busy bit of area purge
+ setlb
+ mov (a0),d0
+ btst DCPGCR_DCPGBSY,d0
+ lne
+
+debugger_local_cache_flushinv_no_dcache:
+ #
+ # secondly, invalidate the icache if it is enabled
+ #
+ mov CHCTR,a0
+ movhu (a0),d0
+ btst CHCTR_ICEN,d0
+ beq debugger_local_cache_flushinv_done
+
+ invalidate_icache 0
+
+debugger_local_cache_flushinv_done:
+ mov d1,epsw
+
+debugger_local_cache_flushinv_end:
+ ret [],0
+ .size debugger_local_cache_flushinv,.-debugger_local_cache_flushinv
+
+###############################################################################
+#
+# void debugger_local_cache_flushinv_one(u8 *addr)
+#
+# Invalidate one particular cacheline if it's in the icache
+#
+###############################################################################
+ ALIGN
+ .globl debugger_local_cache_flushinv_one
+ .type debugger_local_cache_flushinv_one,@function
+debugger_local_cache_flushinv_one:
+ movhu (CHCTR),d1
+ btst CHCTR_DCEN|CHCTR_ICEN,d1
+ beq debugger_local_cache_flushinv_one_end
+ btst CHCTR_DCEN,d1
+ beq debugger_local_cache_flushinv_one_no_dcache
+
+ # round cacheline addr down
+ and L1_CACHE_TAG_MASK,d0
+ mov d0,a1
+ mov d0,d1
+
+ # determine the dcache purge control reg address
+ mov DCACHE_PURGE(0,0),a0
+ and L1_CACHE_TAG_ENTRY,d0
+ add d0,a0
+
+ # retain valid entries in the cache
+ or L1_CACHE_TAG_VALID,d1
+
+ # conditionally purge this line in all ways
+ mov d1,(L1_CACHE_WAYDISP*0,a0)
+
+debugger_local_cache_flushinv_no_dcache:
+ #
+ # now try to flush the icache
+ #
+ mov CHCTR,a0
+ movhu (a0),d0
+ btst CHCTR_ICEN,d0
+ beq mn10300_local_icache_inv_range_reg_end
+
+ LOCAL_CLI_SAVE(d1)
+
+ mov ICIVCR,a0
+
+ # wait for the invalidator to quiesce
+ setlb
+ mov (a0),d0
+ btst ICIVCR_ICIVBSY,d0
+ lne
+
+ # set the mask
+ mov L1_CACHE_TAG_MASK,d0
+ mov d0,(ICIVMR)
+
+ # invalidate the cache line at the given address
+ or ICIVCR_ICI,a1
+ mov a1,(a0)
+
+ # wait for the invalidator to quiesce again
+ setlb
+ mov (a0),d0
+ btst ICIVCR_ICIVBSY,d0
+ lne
+
+ LOCAL_IRQ_RESTORE(d1)
+
+debugger_local_cache_flushinv_one_end:
+ ret [],0
+ .size debugger_local_cache_flushinv_one,.-debugger_local_cache_flushinv_one
diff --git a/arch/mn10300/mm/cache-dbg-flush-by-tag.S b/arch/mn10300/mm/cache-dbg-flush-by-tag.S
new file mode 100644
index 00000000000..bf56930e6e7
--- /dev/null
+++ b/arch/mn10300/mm/cache-dbg-flush-by-tag.S
@@ -0,0 +1,114 @@
+/* MN10300 CPU cache invalidation routines, using direct tag flushing
+ *
+ * Copyright (C) 2011 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/smp.h>
+#include <asm/page.h>
+#include <asm/cache.h>
+#include <asm/irqflags.h>
+#include <asm/cacheflush.h>
+#include "cache.inc"
+
+ .am33_2
+
+###############################################################################
+#
+# void debugger_local_cache_flushinv(void)
+#
+# Flush the entire data cache back to RAM and invalidate the icache
+#
+###############################################################################
+ ALIGN
+ .globl debugger_local_cache_flushinv
+ .type debugger_local_cache_flushinv,@function
+debugger_local_cache_flushinv:
+ #
+ # firstly flush the dcache
+ #
+ movhu (CHCTR),d0
+ btst CHCTR_DCEN|CHCTR_ICEN,d0
+ beq debugger_local_cache_flushinv_end
+
+ btst CHCTR_DCEN,d0
+ beq debugger_local_cache_flushinv_no_dcache
+
+ # read the addresses tagged in the cache's tag RAM and attempt to flush
+ # those addresses specifically
+ # - we rely on the hardware to filter out invalid tag entry addresses
+ mov DCACHE_TAG(0,0),a0 # dcache tag RAM access address
+ mov DCACHE_PURGE(0,0),a1 # dcache purge request address
+ mov L1_CACHE_NWAYS*L1_CACHE_NENTRIES,e0 # total number of entries
+
+mn10300_local_dcache_flush_loop:
+ mov (a0),d0
+ and L1_CACHE_TAG_MASK,d0
+ or L1_CACHE_TAG_VALID,d0 # retain valid entries in the
+ # cache
+ mov d0,(a1) # conditional purge
+
+ add L1_CACHE_BYTES,a0
+ add L1_CACHE_BYTES,a1
+ add -1,e0
+ bne mn10300_local_dcache_flush_loop
+
+debugger_local_cache_flushinv_no_dcache:
+ #
+ # secondly, invalidate the icache if it is enabled
+ #
+ mov CHCTR,a0
+ movhu (a0),d0
+ btst CHCTR_ICEN,d0
+ beq debugger_local_cache_flushinv_end
+
+ invalidate_icache 1
+
+debugger_local_cache_flushinv_end:
+ ret [],0
+ .size debugger_local_cache_flushinv,.-debugger_local_cache_flushinv
+
+###############################################################################
+#
+# void debugger_local_cache_flushinv_one(u8 *addr)
+#
+# Invalidate one particular cacheline if it's in the icache
+#
+###############################################################################
+ ALIGN
+ .globl debugger_local_cache_flushinv_one
+ .type debugger_local_cache_flushinv_one,@function
+debugger_local_cache_flushinv_one:
+ movhu (CHCTR),d1
+ btst CHCTR_DCEN|CHCTR_ICEN,d1
+ beq debugger_local_cache_flushinv_one_end
+ btst CHCTR_DCEN,d1
+ beq debugger_local_cache_flushinv_one_icache
+
+ # round cacheline addr down
+ and L1_CACHE_TAG_MASK,d0
+ mov d0,a1
+
+ # determine the dcache purge control reg address
+ mov DCACHE_PURGE(0,0),a0
+ and L1_CACHE_TAG_ENTRY,d0
+ add d0,a0
+
+ # retain valid entries in the cache
+ or L1_CACHE_TAG_VALID,a1
+
+ # conditionally purge this line in all ways
+ mov a1,(L1_CACHE_WAYDISP*0,a0)
+
+ # now go and do the icache
+ bra debugger_local_cache_flushinv_one_icache
+
+debugger_local_cache_flushinv_one_end:
+ ret [],0
+ .size debugger_local_cache_flushinv_one,.-debugger_local_cache_flushinv_one
diff --git a/arch/mn10300/mm/cache-dbg-inv-by-reg.S b/arch/mn10300/mm/cache-dbg-inv-by-reg.S
new file mode 100644
index 00000000000..c4e6252941b
--- /dev/null
+++ b/arch/mn10300/mm/cache-dbg-inv-by-reg.S
@@ -0,0 +1,69 @@
+/* MN10300 CPU cache invalidation routines, using automatic purge registers
+ *
+ * Copyright (C) 2011 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/cache.h>
+#include <asm/irqflags.h>
+#include <asm/cacheflush.h>
+#include "cache.inc"
+
+ .am33_2
+
+ .globl debugger_local_cache_flushinv_one
+
+###############################################################################
+#
+# void debugger_local_cache_flushinv_one(u8 *addr)
+#
+# Invalidate one particular cacheline if it's in the icache
+#
+###############################################################################
+ ALIGN
+ .globl debugger_local_cache_flushinv_one
+ .type debugger_local_cache_flushinv_one,@function
+debugger_local_cache_flushinv_one:
+ mov d0,a1
+
+ mov CHCTR,a0
+ movhu (a0),d0
+ btst CHCTR_ICEN,d0
+ beq mn10300_local_icache_inv_range_reg_end
+
+ LOCAL_CLI_SAVE(d1)
+
+ mov ICIVCR,a0
+
+ # wait for the invalidator to quiesce
+ setlb
+ mov (a0),d0
+ btst ICIVCR_ICIVBSY,d0
+ lne
+
+ # set the mask
+ mov ~L1_CACHE_TAG_MASK,d0
+ mov d0,(ICIVMR)
+
+ # invalidate the cache line at the given address
+ and ~L1_CACHE_TAG_MASK,a1
+ or ICIVCR_ICI,a1
+ mov a1,(a0)
+
+ # wait for the invalidator to quiesce again
+ setlb
+ mov (a0),d0
+ btst ICIVCR_ICIVBSY,d0
+ lne
+
+ LOCAL_IRQ_RESTORE(d1)
+
+mn10300_local_icache_inv_range_reg_end:
+ ret [],0
+ .size debugger_local_cache_flushinv_one,.-debugger_local_cache_flushinv_one
diff --git a/arch/mn10300/mm/cache-dbg-inv-by-tag.S b/arch/mn10300/mm/cache-dbg-inv-by-tag.S
new file mode 100644
index 00000000000..d8ec821e5f8
--- /dev/null
+++ b/arch/mn10300/mm/cache-dbg-inv-by-tag.S
@@ -0,0 +1,120 @@
+/* MN10300 CPU cache invalidation routines, using direct tag flushing
+ *
+ * Copyright (C) 2011 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/smp.h>
+#include <asm/page.h>
+#include <asm/cache.h>
+#include <asm/irqflags.h>
+#include <asm/cacheflush.h>
+#include "cache.inc"
+
+ .am33_2
+
+ .globl debugger_local_cache_flushinv_one_icache
+
+###############################################################################
+#
+# void debugger_local_cache_flushinv_one(u8 *addr)
+#
+# Invalidate one particular cacheline if it's in the icache
+#
+###############################################################################
+ ALIGN
+ .globl debugger_local_cache_flushinv_one_icache
+ .type debugger_local_cache_flushinv_one_icache,@function
+debugger_local_cache_flushinv_one_icache:
+ movm [d3,a2],(sp)
+
+ mov CHCTR,a2
+ movhu (a2),d0
+ btst CHCTR_ICEN,d0
+ beq debugger_local_cache_flushinv_one_icache_end
+
+ mov d0,a1
+ and L1_CACHE_TAG_MASK,a1
+
+ # read the tags from the tag RAM, and if they indicate a matching valid
+ # cache line then we invalidate that line
+ mov ICACHE_TAG(0,0),a0
+ mov a1,d0
+ and L1_CACHE_TAG_ENTRY,d0
+ add d0,a0 # starting icache tag RAM
+ # access address
+
+ and ~(L1_CACHE_DISPARITY-1),a1 # determine comparator base
+ or L1_CACHE_TAG_VALID,a1
+ mov L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_VALID,d1
+
+ LOCAL_CLI_SAVE(d3)
+
+ # disable the icache
+ movhu (a2),d0
+ and ~CHCTR_ICEN,d0
+ movhu d0,(a2)
+
+ # and wait for it to calm down
+ setlb
+ movhu (a2),d0
+ btst CHCTR_ICBUSY,d0
+ lne
+
+ # check all the way tags for this cache entry
+ mov (a0),d0 # read the tag in the way 0 slot
+ xor a1,d0
+ and d1,d0
+ beq debugger_local_icache_kill # jump if matched
+
+ add L1_CACHE_WAYDISP,a0
+ mov (a0),d0 # read the tag in the way 1 slot
+ xor a1,d0
+ and d1,d0
+ beq debugger_local_icache_kill # jump if matched
+
+ add L1_CACHE_WAYDISP,a0
+ mov (a0),d0 # read the tag in the way 2 slot
+ xor a1,d0
+ and d1,d0
+ beq debugger_local_icache_kill # jump if matched
+
+ add L1_CACHE_WAYDISP,a0
+ mov (a0),d0 # read the tag in the way 3 slot
+ xor a1,d0
+ and d1,d0
+ bne debugger_local_icache_finish # jump if not matched
+
+debugger_local_icache_kill:
+ mov d0,(a0) # kill the tag (D0 is 0 at this point)
+
+debugger_local_icache_finish:
+ # wait for the cache to finish what it's doing
+ setlb
+ movhu (a2),d0
+ btst CHCTR_ICBUSY,d0
+ lne
+
+ # and reenable it
+ or CHCTR_ICEN,d0
+ movhu d0,(a2)
+ movhu (a2),d0
+
+ # re-enable interrupts
+ LOCAL_IRQ_RESTORE(d3)
+
+debugger_local_cache_flushinv_one_icache_end:
+ ret [d3,a2],8
+ .size debugger_local_cache_flushinv_one_icache,.-debugger_local_cache_flushinv_one_icache
+
+#ifdef CONFIG_MN10300_DEBUGGER_CACHE_INV_BY_TAG
+ .globl debugger_local_cache_flushinv_one
+ .type debugger_local_cache_flushinv_one,@function
+debugger_local_cache_flushinv_one = debugger_local_cache_flushinv_one_icache
+#endif
diff --git a/arch/mn10300/mm/cache-dbg-inv.S b/arch/mn10300/mm/cache-dbg-inv.S
new file mode 100644
index 00000000000..eba2d6dca06
--- /dev/null
+++ b/arch/mn10300/mm/cache-dbg-inv.S
@@ -0,0 +1,47 @@
+/* MN10300 CPU cache invalidation routines
+ *
+ * Copyright (C) 2011 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/smp.h>
+#include <asm/page.h>
+#include <asm/cache.h>
+#include <asm/irqflags.h>
+#include <asm/cacheflush.h>
+#include "cache.inc"
+
+ .am33_2
+
+ .globl debugger_local_cache_flushinv
+
+###############################################################################
+#
+# void debugger_local_cache_flushinv(void)
+#
+# Invalidate the entire icache
+#
+###############################################################################
+ ALIGN
+ .globl debugger_local_cache_flushinv
+ .type debugger_local_cache_flushinv,@function
+debugger_local_cache_flushinv:
+ #
+ # we only need to invalidate the icache in this cache mode
+ #
+ mov CHCTR,a0
+ movhu (a0),d0
+ btst CHCTR_ICEN,d0
+ beq debugger_local_cache_flushinv_end
+
+ invalidate_icache 1
+
+debugger_local_cache_flushinv_end:
+ ret [],0
+ .size debugger_local_cache_flushinv,.-debugger_local_cache_flushinv
diff --git a/arch/mn10300/mm/cache-flush-by-tag.S b/arch/mn10300/mm/cache-flush-by-tag.S
index 5cd6a27dd63..1ddc0684924 100644
--- a/arch/mn10300/mm/cache-flush-by-tag.S
+++ b/arch/mn10300/mm/cache-flush-by-tag.S
@@ -62,7 +62,7 @@ mn10300_local_dcache_flush:
mn10300_local_dcache_flush_loop:
mov (a0),d0
- and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0
+ and L1_CACHE_TAG_MASK,d0
or L1_CACHE_TAG_VALID,d0 # retain valid entries in the
# cache
mov d0,(a1) # conditional purge
@@ -112,11 +112,11 @@ mn10300_local_dcache_flush_range:
1:
# round start addr down
- and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0
+ and L1_CACHE_TAG_MASK,d0
mov d0,a1
add L1_CACHE_BYTES,d1 # round end addr up
- and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d1
+ and L1_CACHE_TAG_MASK,d1
# write a request to flush all instances of an address from the cache
mov DCACHE_PURGE(0,0),a0
@@ -215,12 +215,11 @@ mn10300_local_dcache_flush_inv_range:
bra mn10300_local_dcache_flush_inv
1:
- and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0 # round start
- # addr down
+ and L1_CACHE_TAG_MASK,d0 # round start addr down
mov d0,a1
- add L1_CACHE_BYTES,d1 # round end addr up
- and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d1
+ add L1_CACHE_BYTES,d1 # round end addr up
+ and L1_CACHE_TAG_MASK,d1
# write a request to flush and invalidate all instances of an address
# from the cache
diff --git a/arch/mn10300/mm/cache-inv-by-reg.S b/arch/mn10300/mm/cache-inv-by-reg.S
index c8950861ed7..a60825b91e7 100644
--- a/arch/mn10300/mm/cache-inv-by-reg.S
+++ b/arch/mn10300/mm/cache-inv-by-reg.S
@@ -15,6 +15,7 @@
#include <asm/cache.h>
#include <asm/irqflags.h>
#include <asm/cacheflush.h>
+#include "cache.inc"
#define mn10300_local_dcache_inv_range_intr_interval \
+((1 << MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL) - 1)
@@ -62,10 +63,7 @@ mn10300_local_icache_inv:
btst CHCTR_ICEN,d0
beq mn10300_local_icache_inv_end
- # invalidate
- or CHCTR_ICINV,d0
- movhu d0,(a0)
- movhu (a0),d0
+ invalidate_icache 1
mn10300_local_icache_inv_end:
ret [],0
@@ -87,11 +85,8 @@ mn10300_local_dcache_inv:
btst CHCTR_DCEN,d0
beq mn10300_local_dcache_inv_end
- # invalidate
- or CHCTR_DCINV,d0
- movhu d0,(a0)
- movhu (a0),d0
-
+ invalidate_dcache 1
+
mn10300_local_dcache_inv_end:
ret [],0
.size mn10300_local_dcache_inv,.-mn10300_local_dcache_inv
@@ -121,9 +116,9 @@ mn10300_local_dcache_inv_range:
# and if they're not cacheline-aligned, we must flush any bits outside
# the range that share cachelines with stuff inside the range
#ifdef CONFIG_MN10300_CACHE_WBACK
- btst ~(L1_CACHE_BYTES-1),d0
+ btst ~L1_CACHE_TAG_MASK,d0
bne 1f
- btst ~(L1_CACHE_BYTES-1),d1
+ btst ~L1_CACHE_TAG_MASK,d1
beq 2f
1:
bra mn10300_local_dcache_flush_inv_range
@@ -141,12 +136,11 @@ mn10300_local_dcache_inv_range:
# writeback mode, in which case we would be in flush and invalidate by
# now
#ifndef CONFIG_MN10300_CACHE_WBACK
- and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0 # round start
- # addr down
+ and L1_CACHE_TAG_MASK,d0 # round start addr down
mov L1_CACHE_BYTES-1,d2
add d2,d1
- and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d1 # round end addr up
+ and L1_CACHE_TAG_MASK,d1 # round end addr up
#endif /* !CONFIG_MN10300_CACHE_WBACK */
sub d0,d1,d2 # calculate the total size
diff --git a/arch/mn10300/mm/cache-inv-by-tag.S b/arch/mn10300/mm/cache-inv-by-tag.S
index e9713b40c0f..ccedce9c144 100644
--- a/arch/mn10300/mm/cache-inv-by-tag.S
+++ b/arch/mn10300/mm/cache-inv-by-tag.S
@@ -15,6 +15,7 @@
#include <asm/cache.h>
#include <asm/irqflags.h>
#include <asm/cacheflush.h>
+#include "cache.inc"
#define mn10300_local_dcache_inv_range_intr_interval \
+((1 << MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL) - 1)
@@ -70,43 +71,7 @@ mn10300_local_icache_inv:
btst CHCTR_ICEN,d0
beq mn10300_local_icache_inv_end
-#if defined(CONFIG_AM33_2) || defined(CONFIG_AM33_3)
- LOCAL_CLI_SAVE(d1)
-
- # disable the icache
- and ~CHCTR_ICEN,d0
- movhu d0,(a0)
-
- # and wait for it to calm down
- setlb
- movhu (a0),d0
- btst CHCTR_ICBUSY,d0
- lne
-
- # invalidate
- or CHCTR_ICINV,d0
- movhu d0,(a0)
-
- # wait for the cache to finish
- mov CHCTR,a0
- setlb
- movhu (a0),d0
- btst CHCTR_ICBUSY,d0
- lne
-
- # and reenable it
- and ~CHCTR_ICINV,d0
- or CHCTR_ICEN,d0
- movhu d0,(a0)
- movhu (a0),d0
-
- LOCAL_IRQ_RESTORE(d1)
-#else /* CONFIG_AM33_2 || CONFIG_AM33_3 */
- # invalidate
- or CHCTR_ICINV,d0
- movhu d0,(a0)
- movhu (a0),d0
-#endif /* CONFIG_AM33_2 || CONFIG_AM33_3 */
+ invalidate_icache 1
mn10300_local_icache_inv_end:
ret [],0
@@ -128,43 +93,7 @@ mn10300_local_dcache_inv:
btst CHCTR_DCEN,d0
beq mn10300_local_dcache_inv_end
-#if defined(CONFIG_AM33_2) || defined(CONFIG_AM33_3)
- LOCAL_CLI_SAVE(d1)
-
- # disable the dcache
- and ~CHCTR_DCEN,d0
- movhu d0,(a0)
-
- # and wait for it to calm down
- setlb
- movhu (a0),d0
- btst CHCTR_DCBUSY,d0
- lne
-
- # invalidate
- or CHCTR_DCINV,d0
- movhu d0,(a0)
-
- # wait for the cache to finish
- mov CHCTR,a0
- setlb
- movhu (a0),d0
- btst CHCTR_DCBUSY,d0
- lne
-
- # and reenable it
- and ~CHCTR_DCINV,d0
- or CHCTR_DCEN,d0
- movhu d0,(a0)
- movhu (a0),d0
-
- LOCAL_IRQ_RESTORE(d1)
-#else /* CONFIG_AM33_2 || CONFIG_AM33_3 */
- # invalidate
- or CHCTR_DCINV,d0
- movhu d0,(a0)
- movhu (a0),d0
-#endif /* CONFIG_AM33_2 || CONFIG_AM33_3 */
+ invalidate_dcache 1
mn10300_local_dcache_inv_end:
ret [],0
@@ -195,9 +124,9 @@ mn10300_local_dcache_inv_range:
# and if they're not cacheline-aligned, we must flush any bits outside
# the range that share cachelines with stuff inside the range
#ifdef CONFIG_MN10300_CACHE_WBACK
- btst ~(L1_CACHE_BYTES-1),d0
+ btst ~L1_CACHE_TAG_MASK,d0
bne 1f
- btst ~(L1_CACHE_BYTES-1),d1
+ btst ~L1_CACHE_TAG_MASK,d1
beq 2f
1:
bra mn10300_local_dcache_flush_inv_range
@@ -212,11 +141,10 @@ mn10300_local_dcache_inv_range:
beq mn10300_local_dcache_inv_range_end
#ifndef CONFIG_MN10300_CACHE_WBACK
- and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0 # round start
- # addr down
+ and L1_CACHE_TAG_MASK,d0 # round start addr down
add L1_CACHE_BYTES,d1 # round end addr up
- and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d1
+ and L1_CACHE_TAG_MASK,d1
#endif /* !CONFIG_MN10300_CACHE_WBACK */
mov d0,a1
diff --git a/arch/mn10300/mm/cache.inc b/arch/mn10300/mm/cache.inc
new file mode 100644
index 00000000000..394a119b9c7
--- /dev/null
+++ b/arch/mn10300/mm/cache.inc
@@ -0,0 +1,133 @@
+/* MN10300 CPU core caching macros -*- asm -*-
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+
+###############################################################################
+#
+# Invalidate the instruction cache.
+# A0: Should hold CHCTR
+# D0: Should have been read from CHCTR
+# D1: Will be clobbered
+#
+# On some cores it is necessary to disable the icache whilst we do this.
+#
+###############################################################################
+ .macro invalidate_icache,disable_irq
+
+#if defined(CONFIG_AM33_2) || defined(CONFIG_AM33_3)
+ .if \disable_irq
+ # don't want an interrupt routine seeing a disabled cache
+ mov epsw,d1
+ and ~EPSW_IE,epsw
+ or EPSW_NMID,epsw
+ nop
+ nop
+ .endif
+
+ # disable the icache
+ and ~CHCTR_ICEN,d0
+ movhu d0,(a0)
+
+ # and wait for it to calm down
+ setlb
+ movhu (a0),d0
+ btst CHCTR_ICBUSY,d0
+ lne
+
+ # invalidate
+ or CHCTR_ICINV,d0
+ movhu d0,(a0)
+
+ # wait for the cache to finish
+ setlb
+ movhu (a0),d0
+ btst CHCTR_ICBUSY,d0
+ lne
+
+ # and reenable it
+ or CHCTR_ICEN,d0
+ movhu d0,(a0)
+ movhu (a0),d0
+
+ .if \disable_irq
+ LOCAL_IRQ_RESTORE(d1)
+ .endif
+
+#else /* CONFIG_AM33_2 || CONFIG_AM33_3 */
+
+ # invalidate
+ or CHCTR_ICINV,d0
+ movhu d0,(a0)
+ movhu (a0),d0
+
+#endif /* CONFIG_AM33_2 || CONFIG_AM33_3 */
+ .endm
+
+###############################################################################
+#
+# Invalidate the data cache.
+# A0: Should hold CHCTR
+# D0: Should have been read from CHCTR
+# D1: Will be clobbered
+#
+# On some cores it is necessary to disable the dcache whilst we do this.
+#
+###############################################################################
+ .macro invalidate_dcache,disable_irq
+
+#if defined(CONFIG_AM33_2) || defined(CONFIG_AM33_3)
+ .if \disable_irq
+ # don't want an interrupt routine seeing a disabled cache
+ mov epsw,d1
+ and ~EPSW_IE,epsw
+ or EPSW_NMID,epsw
+ nop
+ nop
+ .endif
+
+ # disable the dcache
+ and ~CHCTR_DCEN,d0
+ movhu d0,(a0)
+
+ # and wait for it to calm down
+ setlb
+ movhu (a0),d0
+ btst CHCTR_DCBUSY,d0
+ lne
+
+ # invalidate
+ or CHCTR_DCINV,d0
+ movhu d0,(a0)
+
+ # wait for the cache to finish
+ setlb
+ movhu (a0),d0
+ btst CHCTR_DCBUSY,d0
+ lne
+
+ # and reenable it
+ or CHCTR_DCEN,d0
+ movhu d0,(a0)
+ movhu (a0),d0
+
+ .if \disable_irq
+ LOCAL_IRQ_RESTORE(d1)
+ .endif
+
+#else /* CONFIG_AM33_2 || CONFIG_AM33_3 */
+
+ # invalidate
+ or CHCTR_DCINV,d0
+ movhu d0,(a0)
+ movhu (a0),d0
+
+#endif /* CONFIG_AM33_2 || CONFIG_AM33_3 */
+ .endm
diff --git a/arch/mn10300/mm/fault.c b/arch/mn10300/mm/fault.c
index 59c3da49d9d..0945409a802 100644
--- a/arch/mn10300/mm/fault.c
+++ b/arch/mn10300/mm/fault.c
@@ -28,8 +28,9 @@
#include <asm/uaccess.h>
#include <asm/pgalloc.h>
#include <asm/hardirq.h>
-#include <asm/gdb-stub.h>
#include <asm/cpu-regs.h>
+#include <asm/debugger.h>
+#include <asm/gdb-stub.h>
/*
* Unlock any spinlocks which will prevent us from getting the
@@ -306,10 +307,8 @@ no_context:
printk(" printing pc:\n");
printk(KERN_ALERT "%08lx\n", regs->pc);
-#ifdef CONFIG_GDBSTUB
- gdbstub_intercept(
- regs, fault_code & 0x00010000 ? EXCEP_IAERROR : EXCEP_DAERROR);
-#endif
+ debugger_intercept(fault_code & 0x00010000 ? EXCEP_IAERROR : EXCEP_DAERROR,
+ SIGSEGV, SEGV_ACCERR, regs);
page = PTBR;
page = ((unsigned long *) __va(page))[address >> 22];
diff --git a/arch/mn10300/proc-mn103e010/include/proc/cache.h b/arch/mn10300/proc-mn103e010/include/proc/cache.h
index c1528004163..967d144f307 100644
--- a/arch/mn10300/proc-mn103e010/include/proc/cache.h
+++ b/arch/mn10300/proc-mn103e010/include/proc/cache.h
@@ -23,6 +23,7 @@
#define L1_CACHE_TAG_DIRTY 0x00000008 /* data cache tag dirty bit */
#define L1_CACHE_TAG_ENTRY 0x00000ff0 /* cache tag entry address mask */
#define L1_CACHE_TAG_ADDRESS 0xfffff000 /* cache tag line address mask */
+#define L1_CACHE_TAG_MASK +(L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY)
/*
* specification of the interval between interrupt checking intervals whilst
diff --git a/arch/mn10300/proc-mn2ws0050/include/proc/cache.h b/arch/mn10300/proc-mn2ws0050/include/proc/cache.h
index cafd7b5b55b..bcb5df2d892 100644
--- a/arch/mn10300/proc-mn2ws0050/include/proc/cache.h
+++ b/arch/mn10300/proc-mn2ws0050/include/proc/cache.h
@@ -29,6 +29,7 @@
#define L1_CACHE_TAG_DIRTY 0x00000008 /* data cache tag dirty bit */
#define L1_CACHE_TAG_ENTRY 0x00000fe0 /* cache tag entry address mask */
#define L1_CACHE_TAG_ADDRESS 0xfffff000 /* cache tag line address mask */
+#define L1_CACHE_TAG_MASK +(L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY)
/*
* specification of the interval between interrupt checking intervals whilst