summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/powerpc/boot/dts/mpc5121ads.dts310
-rw-r--r--arch/powerpc/boot/dts/tqm5200.dts14
-rw-r--r--arch/powerpc/platforms/512x/Kconfig17
-rw-r--r--arch/powerpc/platforms/512x/Makefile4
-rw-r--r--arch/powerpc/platforms/512x/clock.c729
-rw-r--r--arch/powerpc/platforms/512x/mpc5121_ads.c69
-rw-r--r--arch/powerpc/platforms/512x/mpc5121_ads.h16
-rw-r--r--arch/powerpc/platforms/512x/mpc5121_ads_cpld.c204
-rw-r--r--arch/powerpc/platforms/512x/mpc5121_generic.c58
-rw-r--r--arch/powerpc/platforms/512x/mpc512x.h17
-rw-r--r--arch/powerpc/platforms/512x/mpc512x_shared.c83
-rw-r--r--arch/powerpc/platforms/52xx/mpc52xx_pci.c3
-rw-r--r--arch/powerpc/sysdev/bestcomm/bestcomm.c2
-rw-r--r--arch/powerpc/sysdev/bestcomm/gen_bd.c95
-rw-r--r--arch/powerpc/sysdev/bestcomm/gen_bd.h5
-rw-r--r--arch/powerpc/sysdev/bestcomm/sram.c2
-rw-r--r--arch/powerpc/sysdev/fsl_soc.c133
17 files changed, 1554 insertions, 207 deletions
diff --git a/arch/powerpc/boot/dts/mpc5121ads.dts b/arch/powerpc/boot/dts/mpc5121ads.dts
index 94ad7b2b241..1f9036c317b 100644
--- a/arch/powerpc/boot/dts/mpc5121ads.dts
+++ b/arch/powerpc/boot/dts/mpc5121ads.dts
@@ -1,7 +1,7 @@
/*
- * MPC5121E MDS Device Tree Source
+ * MPC5121E ADS Device Tree Source
*
- * Copyright 2007 Freescale Semiconductor Inc.
+ * Copyright 2007,2008 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -17,6 +17,10 @@
#address-cells = <1>;
#size-cells = <1>;
+ aliases {
+ pci = &pci;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -39,8 +43,41 @@
reg = <0x00000000 0x10000000>; // 256MB at 0
};
+ mbx@20000000 {
+ compatible = "fsl,mpc5121-mbx";
+ reg = <0x20000000 0x4000>;
+ interrupts = <66 0x8>;
+ interrupt-parent = < &ipic >;
+ };
+
+ sram@30000000 {
+ compatible = "fsl,mpc5121-sram";
+ reg = <0x30000000 0x20000>; // 128K at 0x30000000
+ };
+
+ nfc@40000000 {
+ compatible = "fsl,mpc5121-nfc";
+ reg = <0x40000000 0x100000>; // 1M at 0x40000000
+ interrupts = <6 8>;
+ interrupt-parent = < &ipic >;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ bank-width = <1>;
+ // ADS has two Hynix 512MB Nand flash chips in a single
+ // stacked package .
+ chips = <2>;
+ nand0@0 {
+ label = "nand0";
+ reg = <0x00000000 0x02000000>; // first 32 MB of chip 0
+ };
+ nand1@20000000 {
+ label = "nand1";
+ reg = <0x20000000 0x02000000>; // first 32 MB of chip 1
+ };
+ };
+
localbus@80000020 {
- compatible = "fsl,mpc5121ads-localbus";
+ compatible = "fsl,mpc5121-localbus";
#address-cells = <2>;
#size-cells = <1>;
reg = <0x80000020 0x40>;
@@ -51,14 +88,51 @@
flash@0,0 {
compatible = "cfi-flash";
reg = <0 0x0 0x4000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
bank-width = <4>;
- device-width = <1>;
+ device-width = <2>;
+ protected@0 {
+ label = "protected";
+ reg = <0x00000000 0x00040000>; // first sector is protected
+ read-only;
+ };
+ filesystem@40000 {
+ label = "filesystem";
+ reg = <0x00040000 0x03c00000>; // 60M for filesystem
+ };
+ kernel@3c40000 {
+ label = "kernel";
+ reg = <0x03c40000 0x00280000>; // 2.5M for kernel
+ };
+ device-tree@3ec0000 {
+ label = "device-tree";
+ reg = <0x03ec0000 0x00040000>; // one sector for device tree
+ };
+ u-boot@3f00000 {
+ label = "u-boot";
+ reg = <0x03f00000 0x00100000>; // 1M for u-boot
+ read-only;
+ };
};
board-control@2,0 {
compatible = "fsl,mpc5121ads-cpld";
reg = <0x2 0x0 0x8000>;
};
+
+ cpld_pic: pic@2,a {
+ compatible = "fsl,mpc5121ads-cpld-pic";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x2 0xa 0x5>;
+ interrupt-parent = < &ipic >;
+ // irq routing
+ // all irqs but touch screen are routed to irq0 (ipic 48)
+ // touch screen is statically routed to irq1 (ipic 17)
+ // so don't use it here
+ interrupts = <48 0x8>;
+ };
};
soc@80000000 {
@@ -85,38 +159,252 @@
reg = <0xc00 0x100>;
};
- // 512x PSCs are not 52xx PSCs compatible
+ rtc@a00 { // Real time clock
+ compatible = "fsl,mpc5121-rtc";
+ reg = <0xa00 0x100>;
+ interrupts = <79 0x8 80 0x8>;
+ interrupt-parent = < &ipic >;
+ };
+
+ clock@f00 { // Clock control
+ compatible = "fsl,mpc5121-clock";
+ reg = <0xf00 0x100>;
+ };
+
+ pmc@1000{ //Power Management Controller
+ compatible = "fsl,mpc5121-pmc";
+ reg = <0x1000 0x100>;
+ interrupts = <83 0x2>;
+ interrupt-parent = < &ipic >;
+ };
+
+ gpio@1100 {
+ compatible = "fsl,mpc5121-gpio";
+ reg = <0x1100 0x100>;
+ interrupts = <78 0x8>;
+ interrupt-parent = < &ipic >;
+ };
+
+ mscan@1300 {
+ compatible = "fsl,mpc5121-mscan";
+ cell-index = <0>;
+ interrupts = <12 0x8>;
+ interrupt-parent = < &ipic >;
+ reg = <0x1300 0x80>;
+ };
+
+ mscan@1380 {
+ compatible = "fsl,mpc5121-mscan";
+ cell-index = <1>;
+ interrupts = <13 0x8>;
+ interrupt-parent = < &ipic >;
+ reg = <0x1380 0x80>;
+ };
+
+ i2c@1700 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5121-i2c", "fsl-i2c";
+ cell-index = <0>;
+ reg = <0x1700 0x20>;
+ interrupts = <9 0x8>;
+ interrupt-parent = < &ipic >;
+ fsl5200-clocking;
+ };
+
+ i2c@1720 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5121-i2c", "fsl-i2c";
+ cell-index = <1>;
+ reg = <0x1720 0x20>;
+ interrupts = <10 0x8>;
+ interrupt-parent = < &ipic >;
+ fsl5200-clocking;
+ };
+
+ i2c@1740 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5121-i2c", "fsl-i2c";
+ cell-index = <2>;
+ reg = <0x1740 0x20>;
+ interrupts = <11 0x8>;
+ interrupt-parent = < &ipic >;
+ fsl5200-clocking;
+ };
+
+ i2ccontrol@1760 {
+ compatible = "fsl,mpc5121-i2c-ctrl";
+ reg = <0x1760 0x8>;
+ };
+
+ axe@2000 {
+ compatible = "fsl,mpc5121-axe";
+ reg = <0x2000 0x100>;
+ interrupts = <42 0x8>;
+ interrupt-parent = < &ipic >;
+ };
+
+ display@2100 {
+ compatible = "fsl,mpc5121-diu", "fsl-diu";
+ reg = <0x2100 0x100>;
+ interrupts = <64 0x8>;
+ interrupt-parent = < &ipic >;
+ };
+
+ mdio@2800 {
+ compatible = "fsl,mpc5121-fec-mdio";
+ reg = <0x2800 0x800>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy: ethernet-phy@0 {
+ reg = <1>;
+ device_type = "ethernet-phy";
+ };
+ };
+
+ ethernet@2800 {
+ device_type = "network";
+ compatible = "fsl,mpc5121-fec";
+ reg = <0x2800 0x800>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <4 0x8>;
+ interrupt-parent = < &ipic >;
+ phy-handle = < &phy >;
+ fsl,align-tx-packets = <4>;
+ };
+
+ // 5121e has two dr usb modules
+ // mpc5121_ads only uses USB0
+
+ // USB1 using external ULPI PHY
+ //usb@3000 {
+ // compatible = "fsl,mpc5121-usb2-dr", "fsl-usb2-dr";
+ // reg = <0x3000 0x1000>;
+ // #address-cells = <1>;
+ // #size-cells = <0>;
+ // interrupt-parent = < &ipic >;
+ // interrupts = <43 0x8>;
+ // dr_mode = "otg";
+ // phy_type = "ulpi";
+ // port1;
+ //};
+
+ // USB0 using internal UTMI PHY
+ usb@4000 {
+ compatible = "fsl,mpc5121-usb2-dr", "fsl-usb2-dr";
+ reg = <0x4000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupt-parent = < &ipic >;
+ interrupts = <44 0x8>;
+ dr_mode = "otg";
+ phy_type = "utmi_wide";
+ port0;
+ };
+
+ // IO control
+ ioctl@a000 {
+ compatible = "fsl,mpc5121-ioctl";
+ reg = <0xA000 0x1000>;
+ };
+
+ pata@10200 {
+ compatible = "fsl,mpc5121-pata";
+ reg = <0x10200 0x100>;
+ interrupts = <5 0x8>;
+ interrupt-parent = < &ipic >;
+ };
+
+ // 512x PSCs are not 52xx PSC compatible
// PSC3 serial port A aka ttyPSC0
serial@11300 {
device_type = "serial";
- compatible = "fsl,mpc5121-psc-uart";
+ compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
// Logical port assignment needed until driver
// learns to use aliases
port-number = <0>;
cell-index = <3>;
reg = <0x11300 0x100>;
- interrupts = <0x28 0x8>; // actually the fifo irq
+ interrupts = <40 0x8>;
interrupt-parent = < &ipic >;
+ rx-fifo-size = <16>;
+ tx-fifo-size = <16>;
};
// PSC4 serial port B aka ttyPSC1
serial@11400 {
device_type = "serial";
- compatible = "fsl,mpc5121-psc-uart";
+ compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
// Logical port assignment needed until driver
// learns to use aliases
port-number = <1>;
cell-index = <4>;
reg = <0x11400 0x100>;
- interrupts = <0x28 0x8>; // actually the fifo irq
+ interrupts = <40 0x8>;
interrupt-parent = < &ipic >;
+ rx-fifo-size = <16>;
+ tx-fifo-size = <16>;
};
- pscsfifo@11f00 {
+ // PSC5 in ac97 mode
+ ac97@11500 {
+ compatible = "fsl,mpc5121-psc-ac97", "fsl,mpc5121-psc";
+ cell-index = <5>;
+ reg = <0x11500 0x100>;
+ interrupts = <40 0x8>;
+ interrupt-parent = < &ipic >;
+ fsl,mode = "ac97-slave";
+ rx-fifo-size = <384>;
+ tx-fifo-size = <384>;
+ };
+
+ pscfifo@11f00 {
compatible = "fsl,mpc5121-psc-fifo";
reg = <0x11f00 0x100>;
- interrupts = <0x28 0x8>;
+ interrupts = <40 0x8>;
interrupt-parent = < &ipic >;
};
+
+ dma@14000 {
+ compatible = "fsl,mpc5121-dma2";
+ reg = <0x14000 0x1800>;
+ interrupts = <65 0x8>;
+ interrupt-parent = < &ipic >;
+ };
+
+ };
+
+ pci: pci@80008500 {
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <
+ // IDSEL 0x15 - Slot 1 PCI
+ 0xa800 0x0 0x0 0x1 &cpld_pic 0x0 0x8
+ 0xa800 0x0 0x0 0x2 &cpld_pic 0x1 0x8
+ 0xa800 0x0 0x0 0x3 &cpld_pic 0x2 0x8
+ 0xa800 0x0 0x0 0x4 &cpld_pic 0x3 0x8
+
+ // IDSEL 0x16 - Slot 2 MiniPCI
+ 0xb000 0x0 0x0 0x1 &cpld_pic 0x4 0x8
+ 0xb000 0x0 0x0 0x2 &cpld_pic 0x5 0x8
+
+ // IDSEL 0x17 - Slot 3 MiniPCI
+ 0xb800 0x0 0x0 0x1 &cpld_pic 0x6 0x8
+ 0xb800 0x0 0x0 0x2 &cpld_pic 0x7 0x8
+ >;
+ interrupt-parent = < &ipic >;
+ interrupts = <1 0x8>;
+ bus-range = <0 0>;
+ ranges = <0x42000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
+ 0x02000000 0x0 0xb0000000 0xb0000000 0x0 0x10000000
+ 0x01000000 0x0 0x00000000 0x84000000 0x0 0x01000000>;
+ clock-frequency = <0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0x80008500 0x100>;
+ compatible = "fsl,mpc5121-pci";
+ device_type = "pci";
};
};
diff --git a/arch/powerpc/boot/dts/tqm5200.dts b/arch/powerpc/boot/dts/tqm5200.dts
index 773a68e0005..3008bf8830c 100644
--- a/arch/powerpc/boot/dts/tqm5200.dts
+++ b/arch/powerpc/boot/dts/tqm5200.dts
@@ -70,6 +70,20 @@
fsl,has-wdt;
};
+ can@900 {
+ compatible = "fsl,mpc5200-mscan";
+ interrupts = <2 17 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ reg = <0x900 0x80>;
+ };
+
+ can@980 {
+ compatible = "fsl,mpc5200-mscan";
+ interrupts = <2 18 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ reg = <0x980 0x80>;
+ };
+
gpio@b00 {
compatible = "fsl,mpc5200-gpio";
reg = <0xb00 0x40>;
diff --git a/arch/powerpc/platforms/512x/Kconfig b/arch/powerpc/platforms/512x/Kconfig
index 4c0da0c079e..c62f893ede1 100644
--- a/arch/powerpc/platforms/512x/Kconfig
+++ b/arch/powerpc/platforms/512x/Kconfig
@@ -2,18 +2,29 @@ config PPC_MPC512x
bool
select FSL_SOC
select IPIC
- default n
+ select PPC_CLOCK
config PPC_MPC5121
bool
select PPC_MPC512x
- default n
config MPC5121_ADS
bool "Freescale MPC5121E ADS"
depends on PPC_MULTIPLATFORM && PPC32
select DEFAULT_UIMAGE
select PPC_MPC5121
+ select MPC5121_ADS_CPLD
help
This option enables support for the MPC5121E ADS board.
- default n
+
+config MPC5121_GENERIC
+ bool "Generic support for simple MPC5121 based boards"
+ depends on PPC_MULTIPLATFORM && PPC32
+ select DEFAULT_UIMAGE
+ select PPC_MPC5121
+ help
+ This option enables support for simple MPC5121 based boards
+ which do not need custom platform specific setup.
+
+ Compatible boards include: Protonic LVT base boards (ZANMCU
+ and VICVT2).
diff --git a/arch/powerpc/platforms/512x/Makefile b/arch/powerpc/platforms/512x/Makefile
index 232c89f2039..90be2f5717e 100644
--- a/arch/powerpc/platforms/512x/Makefile
+++ b/arch/powerpc/platforms/512x/Makefile
@@ -1,4 +1,6 @@
#
# Makefile for the Freescale PowerPC 512x linux kernel.
#
-obj-$(CONFIG_MPC5121_ADS) += mpc5121_ads.o
+obj-y += clock.o mpc512x_shared.o
+obj-$(CONFIG_MPC5121_ADS) += mpc5121_ads.o mpc5121_ads_cpld.o
+obj-$(CONFIG_MPC5121_GENERIC) += mpc5121_generic.o
diff --git a/arch/powerpc/platforms/512x/clock.c b/arch/powerpc/platforms/512x/clock.c
new file mode 100644
index 00000000000..f416014ee72
--- /dev/null
+++ b/arch/powerpc/platforms/512x/clock.c
@@ -0,0 +1,729 @@
+/*
+ * Copyright (C) 2007,2008 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Author: John Rigby <jrigby@freescale.com>
+ *
+ * Implements the clk api defined in include/linux/clk.h
+ *
+ * Original based on linux/arch/arm/mach-integrator/clock.c
+ *
+ * Copyright (C) 2004 ARM Limited.
+ * Written by Deep Blue Solutions Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+#include <linux/io.h>
+
+#include <linux/of_platform.h>
+#include <asm/mpc512x.h>
+#include <asm/clk_interface.h>
+
+#undef CLK_DEBUG
+
+static int clocks_initialized;
+
+#define CLK_HAS_RATE 0x1 /* has rate in MHz */
+#define CLK_HAS_CTRL 0x2 /* has control reg and bit */
+
+struct clk {
+ struct list_head node;
+ char name[32];
+ int flags;
+ struct device *dev;
+ unsigned long rate;
+ struct module *owner;
+ void (*calc) (struct clk *);
+ struct clk *parent;
+ int reg, bit; /* CLK_HAS_CTRL */
+ int div_shift; /* only used by generic_div_clk_calc */
+};
+
+static LIST_HEAD(clocks);
+static DEFINE_MUTEX(clocks_mutex);
+
+static struct clk *mpc5121_clk_get(struct device *dev, const char *id)
+{
+ struct clk *p, *clk = ERR_PTR(-ENOENT);
+ int dev_match = 0;
+ int id_match = 0;
+
+ if (dev == NULL && id == NULL)
+ return NULL;
+
+ mutex_lock(&clocks_mutex);
+ list_for_each_entry(p, &clocks, node) {
+ if (dev && dev == p->dev)
+ dev_match++;
+ if (strcmp(id, p->name) == 0)
+ id_match++;
+ if ((dev_match || id_match) && try_module_get(p->owner)) {
+ clk = p;
+ break;
+ }
+ }
+ mutex_unlock(&clocks_mutex);
+
+ return clk;
+}
+
+#ifdef CLK_DEBUG
+static void dump_clocks(void)
+{
+ struct clk *p;
+
+ mutex_lock(&clocks_mutex);
+ printk(KERN_INFO "CLOCKS:\n");
+ list_for_each_entry(p, &clocks, node) {
+ printk(KERN_INFO " %s %ld", p->name, p->rate);
+ if (p->parent)
+ printk(KERN_INFO " %s %ld", p->parent->name,
+ p->parent->rate);
+ if (p->flags & CLK_HAS_CTRL)
+ printk(KERN_INFO " reg/bit %d/%d", p->reg, p->bit);
+ printk("\n");
+ }
+ mutex_unlock(&clocks_mutex);
+}
+#define DEBUG_CLK_DUMP() dump_clocks()
+#else
+#define DEBUG_CLK_DUMP()
+#endif
+
+
+static void mpc5121_clk_put(struct clk *clk)
+{
+ module_put(clk->owner);
+}
+
+#define NRPSC 12
+
+struct mpc512x_clockctl {
+ u32 spmr; /* System PLL Mode Reg */
+ u32 sccr[2]; /* System Clk Ctrl Reg 1 & 2 */
+ u32 scfr1; /* System Clk Freq Reg 1 */
+ u32 scfr2; /* System Clk Freq Reg 2 */
+ u32 reserved;
+ u32 bcr; /* Bread Crumb Reg */
+ u32 pccr[NRPSC]; /* PSC Clk Ctrl Reg 0-11 */
+ u32 spccr; /* SPDIF Clk Ctrl Reg */
+ u32 cccr; /* CFM Clk Ctrl Reg */
+ u32 dccr; /* DIU Clk Cnfg Reg */
+};
+
+struct mpc512x_clockctl __iomem *clockctl;
+
+static int mpc5121_clk_enable(struct clk *clk)
+{
+ unsigned int mask;
+
+ if (clk->flags & CLK_HAS_CTRL) {
+ mask = in_be32(&clockctl->sccr[clk->reg]);
+ mask |= 1 << clk->bit;
+ out_be32(&clockctl->sccr[clk->reg], mask);
+ }
+ return 0;
+}
+
+static void mpc5121_clk_disable(struct clk *clk)
+{
+ unsigned int mask;
+
+ if (clk->flags & CLK_HAS_CTRL) {
+ mask = in_be32(&clockctl->sccr[clk->reg]);
+ mask &= ~(1 << clk->bit);
+ out_be32(&clockctl->sccr[clk->reg], mask);
+ }
+}
+
+static unsigned long mpc5121_clk_get_rate(struct clk *clk)
+{
+ if (clk->flags & CLK_HAS_RATE)
+ return clk->rate;
+ else
+ return 0;
+}
+
+static long mpc5121_clk_round_rate(struct clk *clk, unsigned long rate)
+{
+ return rate;
+}
+
+static int mpc5121_clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ return 0;
+}
+
+static int clk_register(struct clk *clk)
+{
+ mutex_lock(&clocks_mutex);
+ list_add(&clk->node, &clocks);
+ mutex_unlock(&clocks_mutex);
+ return 0;
+}
+
+static unsigned long spmf_mult(void)
+{
+ /*
+ * Convert spmf to multiplier
+ */
+ static int spmf_to_mult[] = {
+ 68, 1, 12, 16,
+ 20, 24, 28, 32,
+ 36, 40, 44, 48,
+ 52, 56, 60, 64
+ };
+ int spmf = (clockctl->spmr >> 24) & 0xf;
+ return spmf_to_mult[spmf];
+}
+
+static unsigned long sysdiv_div_x_2(void)
+{
+ /*
+ * Convert sysdiv to divisor x 2
+ * Some divisors have fractional parts so
+ * multiply by 2 then divide by this value
+ */
+ static int sysdiv_to_div_x_2[] = {
+ 4, 5, 6, 7,
+ 8, 9, 10, 14,
+ 12, 16, 18, 22,
+ 20, 24, 26, 30,
+ 28, 32, 34, 38,
+ 36, 40, 42, 46,
+ 44, 48, 50, 54,
+ 52, 56, 58, 62,
+ 60, 64, 66,
+ };
+ int sysdiv = (clockctl->scfr2 >> 26) & 0x3f;
+ return sysdiv_to_div_x_2[sysdiv];
+}
+
+static unsigned long ref_to_sys(unsigned long rate)
+{
+ rate *= spmf_mult();
+ rate *= 2;
+ rate /= sysdiv_div_x_2();
+
+ return rate;
+}
+
+static unsigned long sys_to_ref(unsigned long rate)
+{
+ rate *= sysdiv_div_x_2();
+ rate /= 2;
+ rate /= spmf_mult();
+
+ return rate;
+}
+
+static long ips_to_ref(unsigned long rate)
+{
+ int ips_div = (clockctl->scfr1 >> 23) & 0x7;
+
+ rate *= ips_div; /* csb_clk = ips_clk * ips_div */
+ rate *= 2; /* sys_clk = csb_clk * 2 */
+ return sys_to_ref(rate);
+}
+
+static unsigned long devtree_getfreq(char *clockname)
+{
+ struct device_node *np;
+ const unsigned int *prop;
+ unsigned int val = 0;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-immr");
+ if (np) {
+ prop = of_get_property(np, clockname, NULL);
+ if (prop)
+ val = *prop;
+ of_node_put(np);
+ }
+ return val;
+}
+
+static void ref_clk_calc(struct clk *clk)
+{
+ unsigned long rate;
+
+ rate = devtree_getfreq("bus-frequency");
+ if (rate == 0) {
+ printk(KERN_ERR "No bus-frequency in dev tree\n");
+ clk->rate = 0;
+ return;
+ }
+ clk->rate = ips_to_ref(rate);
+}
+
+static struct clk ref_clk = {
+ .name = "ref_clk",
+ .calc = ref_clk_calc,
+};
+
+
+static void sys_clk_calc(struct clk *clk)
+{
+ clk->rate = ref_to_sys(ref_clk.rate);
+}
+
+static struct clk sys_clk = {
+ .name = "sys_clk",
+ .calc = sys_clk_calc,
+};
+
+static void diu_clk_calc(struct clk *clk)
+{
+ int diudiv_x_2 = clockctl->scfr1 & 0xff;
+ unsigned long rate;
+
+ rate = sys_clk.rate;
+
+ rate *= 2;
+ rate /= diudiv_x_2;
+
+ clk->rate = rate;
+}
+
+static void half_clk_calc(struct clk *clk)
+{
+ clk->rate = clk->parent->rate / 2;
+}
+
+static void generic_div_clk_calc(struct clk *clk)
+{
+ int div = (clockctl->scfr1 >> clk->div_shift) & 0x7;
+
+ clk->rate = clk->parent->rate / div;
+}
+
+static void unity_clk_calc(struct clk *clk)
+{
+ clk->rate = clk->parent->rate;
+}
+
+static struct clk csb_clk = {
+ .name = "csb_clk",
+ .calc = half_clk_calc,
+ .parent = &sys_clk,
+};
+
+static void e300_clk_calc(struct clk *clk)
+{
+ int spmf = (clockctl->spmr >> 16) & 0xf;
+ int ratex2 = clk->parent->rate * spmf;
+
+ clk->rate = ratex2 / 2;
+}
+
+static struct clk e300_clk = {
+ .name = "e300_clk",
+ .calc = e300_clk_calc,
+ .parent = &csb_clk,
+};
+
+static struct clk ips_clk = {
+ .name = "ips_clk",
+ .calc = generic_div_clk_calc,
+ .parent = &csb_clk,
+ .div_shift = 23,
+};
+
+/*
+ * Clocks controlled by SCCR1 (.reg = 0)
+ */
+static struct clk lpc_clk = {
+ .name = "lpc_clk",
+ .flags = CLK_HAS_CTRL,
+ .reg = 0,
+ .bit = 30,
+ .calc = generic_div_clk_calc,
+ .parent = &ips_clk,
+ .div_shift = 11,
+};
+
+static struct clk nfc_clk = {
+ .name = "nfc_clk",
+ .flags = CLK_HAS_CTRL,
+ .reg = 0,
+ .bit = 29,
+ .calc = generic_div_clk_calc,
+ .parent = &ips_clk,
+ .div_shift = 8,
+};
+
+static struct clk pata_clk = {
+ .name = "pata_clk",
+ .flags = CLK_HAS_CTRL,
+ .reg = 0,
+ .bit = 28,
+ .calc = unity_clk_calc,
+ .parent = &ips_clk,
+};
+
+/*
+ * PSC clocks (bits 27 - 16)
+ * are setup elsewhere
+ */
+
+static struct clk sata_clk = {
+ .name = "sata_clk",
+ .flags = CLK_HAS_CTRL,
+ .reg = 0,
+ .bit = 14,
+ .calc = unity_clk_calc,
+ .parent = &ips_clk,
+};
+
+static struct clk fec_clk = {
+ .name = "fec_clk",
+ .flags = CLK_HAS_CTRL,
+ .reg = 0,
+ .bit = 13,
+ .calc = unity_clk_calc,
+ .parent = &ips_clk,
+};
+
+static struct clk pci_clk = {
+ .name = "pci_clk",
+ .flags = CLK_HAS_CTRL,
+ .reg = 0,
+ .bit = 11,
+ .calc = generic_div_clk_calc,
+ .parent = &csb_clk,
+ .div_shift = 20,
+};
+
+/*
+ * Clocks controlled by SCCR2 (.reg = 1)
+ */
+static struct clk diu_clk = {
+ .name = "diu_clk",
+ .flags = CLK_HAS_CTRL,
+ .reg = 1,
+ .bit = 31,
+ .calc = diu_clk_calc,
+};
+
+static struct clk axe_clk = {
+ .name = "axe_clk",
+ .flags = CLK_HAS_CTRL,
+ .reg = 1,
+ .bit = 30,
+ .calc = unity_clk_calc,
+ .parent = &csb_clk,
+};
+
+static struct clk usb1_clk = {
+ .name = "usb1_clk",
+ .flags = CLK_HAS_CTRL,
+ .reg = 1,
+ .bit = 28,
+ .calc = unity_clk_calc,
+ .parent = &csb_clk,
+};
+
+static struct clk usb2_clk = {
+ .name = "usb2_clk",
+ .flags = CLK_HAS_CTRL,
+ .reg = 1,
+ .bit = 27,
+ .calc = unity_clk_calc,
+ .parent = &csb_clk,
+};
+
+static struct clk i2c_clk = {
+ .name = "i2c_clk",
+ .flags = CLK_HAS_CTRL,
+ .reg = 1,
+ .bit = 26,
+ .calc = unity_clk_calc,
+ .parent = &ips_clk,
+};
+
+static struct clk mscan_clk = {
+ .name = "mscan_clk",
+ .flags = CLK_HAS_CTRL,
+ .reg = 1,
+ .bit = 25,
+ .calc = unity_clk_calc,
+ .parent = &ips_clk,
+};
+
+static struct clk sdhc_clk = {
+ .name = "sdhc_clk",
+ .flags = CLK_HAS_CTRL,
+ .reg = 1,
+ .bit = 24,
+ .calc = unity_clk_calc,
+ .parent = &ips_clk,
+};
+
+static struct clk mbx_bus_clk = {
+ .name = "mbx_bus_clk",
+ .flags = CLK_HAS_CTRL,
+ .reg = 1,
+ .bit = 22,
+ .calc = half_clk_calc,
+ .parent = &csb_clk,
+};
+
+static struct clk mbx_clk = {
+ .name = "mbx_clk",
+ .flags = CLK_HAS_CTRL,
+ .reg = 1,
+ .bit = 21,
+ .calc = unity_clk_calc,
+ .parent = &csb_clk,
+};
+
+static struct clk mbx_3d_clk = {
+ .name = "mbx_3d_clk",
+ .flags = CLK_HAS_CTRL,
+ .reg = 1,
+ .bit = 20,
+ .calc = generic_div_clk_calc,
+ .parent = &mbx_bus_clk,
+ .div_shift = 14,
+};
+
+static void psc_mclk_in_calc(struct clk *clk)
+{
+ clk->rate = devtree_getfreq("psc_mclk_in");
+ if (!clk->rate)
+ clk->rate = 25000000;
+}
+
+static struct clk psc_mclk_in = {
+ .name = "psc_mclk_in",
+ .calc = psc_mclk_in_calc,
+};
+
+static struct clk spdif_txclk = {
+ .name = "spdif_txclk",
+ .flags = CLK_HAS_CTRL,
+ .reg = 1,
+ .bit = 23,
+};
+
+static struct clk spdif_rxclk = {
+ .name = "spdif_rxclk",
+ .flags = CLK_HAS_CTRL,
+ .reg = 1,
+ .bit = 23,
+};
+
+static void ac97_clk_calc(struct clk *clk)
+{
+ /* ac97 bit clock is always 24.567 MHz */
+ clk->rate = 24567000;
+}
+
+static struct clk ac97_clk = {
+ .name = "ac97_clk_in",
+ .calc = ac97_clk_calc,
+};
+
+struct clk *rate_clks[] = {
+ &ref_clk,
+ &sys_clk,
+ &diu_clk,
+ &csb_clk,
+ &e300_clk,
+ &ips_clk,
+ &fec_clk,
+ &sata_clk,
+ &pata_clk,
+ &nfc_clk,
+ &lpc_clk,
+ &mbx_bus_clk,
+ &mbx_clk,
+ &mbx_3d_clk,
+ &axe_clk,
+ &usb1_clk,
+ &usb2_clk,
+ &i2c_clk,
+ &mscan_clk,
+ &sdhc_clk,
+ &pci_clk,
+ &psc_mclk_in,
+ &spdif_txclk,
+ &spdif_rxclk,
+ &ac97_clk,
+ NULL
+};
+
+static void rate_clk_init(struct clk *clk)
+{
+ if (clk->calc) {
+ clk->calc(clk);
+ clk->flags |= CLK_HAS_RATE;
+ clk_register(clk);
+ } else {
+ printk(KERN_WARNING
+ "Could not initialize clk %s without a calc routine\n",
+ clk->name);
+ }
+}
+
+static void rate_clks_init(void)
+{
+ struct clk **cpp, *clk;
+
+ cpp = rate_clks;
+ while ((clk = *cpp++))
+ rate_clk_init(clk);
+}
+
+/*
+ * There are two clk enable registers with 32 enable bits each
+ * psc clocks and device clocks are all stored in dev_clks
+ */
+struct clk dev_clks[2][32];
+
+/*
+ * Given a psc number return the dev_clk
+ * associated with it
+ */
+static struct clk *psc_dev_clk(int pscnum)
+{
+ int reg, bit;
+ struct clk *clk;
+
+ reg = 0;
+ bit = 27 - pscnum;
+
+ clk = &dev_clks[reg][bit];
+ clk->reg = 0;
+ clk->bit = bit;
+ return clk;
+}
+
+/*
+ * PSC clock rate calculation
+ */
+static void psc_calc_rate(struct clk *clk, int pscnum, struct device_node *np)
+{
+ unsigned long mclk_src = sys_clk.rate;
+ unsigned long mclk_div;
+
+ /*
+ * Can only change value of mclk divider
+ * when the divider is disabled.
+ *
+ * Zero is not a valid divider so minimum
+ * divider is 1
+ *
+ * disable/set divider/enable
+ */
+ out_be32(&clockctl->pccr[pscnum], 0);
+ out_be32(&clockctl->pccr[pscnum], 0x00020000);
+ out_be32(&clockctl->pccr[pscnum], 0x00030000);
+
+ if (clockctl->pccr[pscnum] & 0x80) {
+ clk->rate = spdif_rxclk.rate;
+ return;
+ }
+
+ switch ((clockctl->pccr[pscnum] >> 14) & 0x3) {
+ case 0:
+ mclk_src = sys_clk.rate;
+ break;
+ case 1:
+ mclk_src = ref_clk.rate;
+ break;
+ case 2:
+ mclk_src = psc_mclk_in.rate;
+ break;
+ case 3:
+ mclk_src = spdif_txclk.rate;
+ break;
+ }
+
+ mclk_div = ((clockctl->pccr[pscnum] >> 17) & 0x7fff) + 1;
+ clk->rate = mclk_src / mclk_div;
+}
+
+/*
+ * Find all psc nodes in device tree and assign a clock
+ * with name "psc%d_mclk" and dev pointing at the device
+ * returned from of_find_device_by_node
+ */
+static void psc_clks_init(void)
+{
+ struct device_node *np;
+ const u32 *cell_index;
+ struct of_device *ofdev;
+
+ for_each_compatible_node(np, NULL, "fsl,mpc5121-psc") {
+ cell_index = of_get_property(np, "cell-index", NULL);
+ if (cell_index) {
+ int pscnum = *cell_index;
+ struct clk *clk = psc_dev_clk(pscnum);
+
+ clk->flags = CLK_HAS_RATE | CLK_HAS_CTRL;
+ ofdev = of_find_device_by_node(np);
+ clk->dev = &ofdev->dev;
+ /*
+ * AC97 is special rate clock does
+ * not go through normal path
+ */
+ if (strcmp("ac97", np->name) == 0)
+ clk->rate = ac97_clk.rate;
+ else
+ psc_calc_rate(clk, pscnum, np);
+ sprintf(clk->name, "psc%d_mclk", pscnum);
+ clk_register(clk);
+ clk_enable(clk);
+ }
+ }
+}
+
+static struct clk_interface mpc5121_clk_functions = {
+ .clk_get = mpc5121_clk_get,
+ .clk_enable = mpc5121_clk_enable,
+ .clk_disable = mpc5121_clk_disable,
+ .clk_get_rate = mpc5121_clk_get_rate,
+ .clk_put = mpc5121_clk_put,
+ .clk_round_rate = mpc5121_clk_round_rate,
+ .clk_set_rate = mpc5121_clk_set_rate,
+ .clk_set_parent = NULL,
+ .clk_get_parent = NULL,
+};
+
+static int
+mpc5121_clk_init(void)
+{
+ struct device_node *np;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-clock");
+ if (np) {
+ clockctl = of_iomap(np, 0);
+ of_node_put(np);
+ }
+
+ if (!clockctl) {
+ printk(KERN_ERR "Could not map clock control registers\n");
+ return 0;
+ }
+
+ rate_clks_init();
+ psc_clks_init();
+
+ /* leave clockctl mapped forever */
+ /*iounmap(clockctl); */
+ DEBUG_CLK_DUMP();
+ clocks_initialized++;
+ clk_functions = mpc5121_clk_functions;
+ return 0;
+}
+
+
+arch_initcall(mpc5121_clk_init);
diff --git a/arch/powerpc/platforms/512x/mpc5121_ads.c b/arch/powerpc/platforms/512x/mpc5121_ads.c
index 50bd3a31902..5ebf6939a69 100644
--- a/arch/powerpc/platforms/512x/mpc5121_ads.c
+++ b/arch/powerpc/platforms/512x/mpc5121_ads.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
+ * Copyright (C) 2007, 2008 Freescale Semiconductor, Inc. All rights reserved.
*
* Author: John Rigby, <jrigby@freescale.com>, Thur Mar 29 2007
*
@@ -15,7 +15,6 @@
#include <linux/kernel.h>
#include <linux/io.h>
-#include <linux/irq.h>
#include <linux/of_platform.h>
#include <asm/machdep.h>
@@ -23,65 +22,22 @@
#include <asm/prom.h>
#include <asm/time.h>
-/**
- * mpc512x_find_ips_freq - Find the IPS bus frequency for a device
- * @node: device node
- *
- * Returns IPS bus frequency, or 0 if the bus frequency cannot be found.
- */
-unsigned long
-mpc512x_find_ips_freq(struct device_node *node)
-{
- struct device_node *np;
- const unsigned int *p_ips_freq = NULL;
-
- of_node_get(node);
- while (node) {
- p_ips_freq = of_get_property(node, "bus-frequency", NULL);
- if (p_ips_freq)
- break;
-
- np = of_get_parent(node);
- of_node_put(node);
- node = np;
- }
- if (node)
- of_node_put(node);
-
- return p_ips_freq ? *p_ips_freq : 0;
-}
-EXPORT_SYMBOL(mpc512x_find_ips_freq);
-
-static struct of_device_id __initdata of_bus_ids[] = {
- { .name = "soc", },
- { .name = "localbus", },
- {},
-};
+#include "mpc512x.h"
+#include "mpc5121_ads.h"
-static void __init mpc5121_ads_declare_of_platform_devices(void)
+static void __init mpc5121_ads_setup_arch(void)
{
- /* Find every child of the SOC node and add it to of_platform */
- if (of_platform_bus_probe(NULL, of_bus_ids, NULL))
- printk(KERN_ERR __FILE__ ": "
- "Error while probing of_platform bus\n");
+ printk(KERN_INFO "MPC5121 ADS board from Freescale Semiconductor\n");
+ /*
+ * cpld regs are needed early
+ */
+ mpc5121_ads_cpld_map();
}
static void __init mpc5121_ads_init_IRQ(void)
{
- struct device_node *np;
-
- np = of_find_compatible_node(NULL, NULL, "fsl,ipic");
- if (!np)
- return;
-
- ipic_init(np, 0);
- of_node_put(np);
-
- /*
- * Initialize the default interrupt mapping priorities,
- * in case the boot rom changed something on us.
- */
- ipic_set_default_priority();
+ mpc512x_init_IRQ();
+ mpc5121_ads_cpld_pic_init();
}
/*
@@ -97,7 +53,8 @@ static int __init mpc5121_ads_probe(void)
define_machine(mpc5121_ads) {
.name = "MPC5121 ADS",
.probe = mpc5121_ads_probe,
- .init = mpc5121_ads_declare_of_platform_devices,
+ .setup_arch = mpc5121_ads_setup_arch,
+ .init = mpc512x_declare_of_platform_devices,
.init_IRQ = mpc5121_ads_init_IRQ,
.get_irq = ipic_get_irq,
.calibrate_decr = generic_calibrate_decr,
diff --git a/arch/powerpc/platforms/512x/mpc5121_ads.h b/arch/powerpc/platforms/512x/mpc5121_ads.h
new file mode 100644
index 00000000000..662076cfee2
--- /dev/null
+++ b/arch/powerpc/platforms/512x/mpc5121_ads.h
@@ -0,0 +1,16 @@
+/*
+ * Copyright (C) 2008 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * Prototypes for ADS5121 specific code
+ */
+
+#ifndef __MPC512ADS_H__
+#define __MPC512ADS_H__
+extern void __init mpc5121_ads_cpld_map(void);
+extern void __init mpc5121_ads_cpld_pic_init(void);
+#endif /* __MPC512ADS_H__ */
diff --git a/arch/powerpc/platforms/512x/mpc5121_ads_cpld.c b/arch/powerpc/platforms/512x/mpc5121_ads_cpld.c
new file mode 100644
index 00000000000..a6ce8056662
--- /dev/null
+++ b/arch/powerpc/platforms/512x/mpc5121_ads_cpld.c
@@ -0,0 +1,204 @@
+/*
+ * Copyright (C) 2008 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Author: John Rigby, <jrigby@freescale.com>
+ *
+ * Description:
+ * MPC5121ADS CPLD irq handling
+ *
+ * This is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <asm/prom.h>
+
+static struct device_node *cpld_pic_node;
+static struct irq_host *cpld_pic_host;
+
+/*
+ * Bits to ignore in the misc_status register
+ * 0x10 touch screen pendown is hard routed to irq1
+ * 0x02 pci status is read from pci status register
+ */
+#define MISC_IGNORE 0x12
+
+/*
+ * Nothing to ignore in pci status register
+ */
+#define PCI_IGNORE 0x00
+
+struct cpld_pic {
+ u8 pci_mask;
+ u8 pci_status;
+ u8 route;
+ u8 misc_mask;
+ u8 misc_status;
+ u8 misc_control;
+};
+
+static struct cpld_pic __iomem *cpld_regs;
+
+static void __iomem *
+irq_to_pic_mask(unsigned int irq)
+{
+ return irq <= 7 ? &cpld_regs->pci_mask : &cpld_regs->misc_mask;
+}
+
+static unsigned int
+irq_to_pic_bit(unsigned int irq)
+{
+ return 1 << (irq & 0x7);
+}
+
+static void
+cpld_mask_irq(unsigned int irq)
+{
+ unsigned int cpld_irq = (unsigned int)irq_map[irq].hwirq;
+ void __iomem *pic_mask = irq_to_pic_mask(cpld_irq);
+
+ out_8(pic_mask,
+ in_8(pic_mask) | irq_to_pic_bit(cpld_irq));
+}
+
+static void
+cpld_unmask_irq(unsigned int irq)
+{
+ unsigned int cpld_irq = (unsigned int)irq_map[irq].hwirq;
+ void __iomem *pic_mask = irq_to_pic_mask(cpld_irq);
+
+ out_8(pic_mask,
+ in_8(pic_mask) & ~irq_to_pic_bit(cpld_irq));
+}
+
+static struct irq_chip cpld_pic = {
+ .typename = " CPLD PIC ",
+ .mask = cpld_mask_irq,
+ .ack = cpld_mask_irq,
+ .unmask = cpld_unmask_irq,
+};
+
+static int
+cpld_pic_get_irq(int offset, u8 ignore, u8 __iomem *statusp,
+ u8 __iomem *maskp)
+{
+ int cpld_irq;
+ u8 status = in_8(statusp);
+ u8 mask = in_8(maskp);
+
+ /* ignore don't cares and masked irqs */
+ status |= (ignore | mask);
+
+ if (status == 0xff)
+ return NO_IRQ_IGNORE;
+
+ cpld_irq = ffz(status) + offset;
+
+ return irq_linear_revmap(cpld_pic_host, cpld_irq);
+}
+
+static void
+cpld_pic_cascade(unsigned int irq, struct irq_desc *desc)
+{
+ irq = cpld_pic_get_irq(0, PCI_IGNORE, &cpld_regs->pci_status,
+ &cpld_regs->pci_mask);
+ if (irq != NO_IRQ && irq != NO_IRQ_IGNORE) {
+ generic_handle_irq(irq);
+ return;
+ }
+
+ irq = cpld_pic_get_irq(8, MISC_IGNORE, &cpld_regs->misc_status,
+ &cpld_regs->misc_mask);
+ if (irq != NO_IRQ && irq != NO_IRQ_IGNORE) {
+ generic_handle_irq(irq);
+ return;
+ }
+}
+
+static int
+cpld_pic_host_match(struct irq_host *h, struct device_node *node)
+{
+ return cpld_pic_node == node;
+}
+
+static int
+cpld_pic_host_map(struct irq_host *h, unsigned int virq,
+ irq_hw_number_t hw)
+{
+ get_irq_desc(virq)->status |= IRQ_LEVEL;
+ set_irq_chip_and_handler(virq, &cpld_pic, handle_level_irq);
+ return 0;
+}
+
+static struct
+irq_host_ops cpld_pic_host_ops = {
+ .match = cpld_pic_host_match,
+ .map = cpld_pic_host_map,
+};
+
+void __init
+mpc5121_ads_cpld_map(void)
+{
+ struct device_node *np = NULL;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121ads-cpld-pic");
+ if (!np) {
+ printk(KERN_ERR "CPLD PIC init: can not find cpld-pic node\n");
+ return;
+ }
+
+ cpld_regs = of_iomap(np, 0);
+ of_node_put(np);
+}
+
+void __init
+mpc5121_ads_cpld_pic_init(void)
+{
+ unsigned int cascade_irq;
+ struct device_node *np = NULL;
+
+ pr_debug("cpld_ic_init\n");
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121ads-cpld-pic");
+ if (!np) {
+ printk(KERN_ERR "CPLD PIC init: can not find cpld-pic node\n");
+ return;
+ }
+
+ if (!cpld_regs)
+ goto end;
+
+ cascade_irq = irq_of_parse_and_map(np, 0);
+ if (cascade_irq == NO_IRQ)
+ goto end;
+
+ /*
+ * statically route touch screen pendown through 1
+ * and ignore it here
+ * route all others through our cascade irq
+ */
+ out_8(&cpld_regs->route, 0xfd);
+ out_8(&cpld_regs->pci_mask, 0xff);
+ /* unmask pci ints in misc mask */
+ out_8(&cpld_regs->misc_mask, ~(MISC_IGNORE));
+
+ cpld_pic_node = of_node_get(np);
+
+ cpld_pic_host =
+ irq_alloc_host(np, IRQ_HOST_MAP_LINEAR, 16, &cpld_pic_host_ops, 16);
+ if (!cpld_pic_host) {
+ printk(KERN_ERR "CPLD PIC: failed to allocate irq host!\n");
+ goto end;
+ }
+
+ set_irq_chained_handler(cascade_irq, cpld_pic_cascade);
+end:
+ of_node_put(np);
+}
diff --git a/arch/powerpc/platforms/512x/mpc5121_generic.c b/arch/powerpc/platforms/512x/mpc5121_generic.c
new file mode 100644
index 00000000000..2479de9e2d1
--- /dev/null
+++ b/arch/powerpc/platforms/512x/mpc5121_generic.c
@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) 2007,2008 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Author: John Rigby, <jrigby@freescale.com>
+ *
+ * Description:
+ * MPC5121 SoC setup
+ *
+ * This is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/of_platform.h>
+
+#include <asm/machdep.h>
+#include <asm/ipic.h>
+#include <asm/prom.h>
+#include <asm/time.h>
+
+#include "mpc512x.h"
+
+/*
+ * list of supported boards
+ */
+static char *board[] __initdata = {
+ "prt,prtlvt",
+ NULL
+};
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init mpc5121_generic_probe(void)
+{
+ unsigned long node = of_get_flat_dt_root();
+ int i = 0;
+
+ while (board[i]) {
+ if (of_flat_dt_is_compatible(node, board[i]))
+ break;
+ i++;
+ }
+
+ return board[i] != NULL;
+}
+
+define_machine(mpc5121_generic) {
+ .name = "MPC5121 generic",
+ .probe = mpc5121_generic_probe,
+ .init = mpc512x_declare_of_platform_devices,
+ .init_IRQ = mpc512x_init_IRQ,
+ .get_irq = ipic_get_irq,
+ .calibrate_decr = generic_calibrate_decr,
+};
diff --git a/arch/powerpc/platforms/512x/mpc512x.h b/arch/powerpc/platforms/512x/mpc512x.h
new file mode 100644
index 00000000000..9c03693cb00
--- /dev/null
+++ b/arch/powerpc/platforms/512x/mpc512x.h
@@ -0,0 +1,17 @@
+/*
+ * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * Prototypes for MPC512x shared code
+ */
+
+#ifndef __MPC512X_H__
+#define __MPC512X_H__
+extern unsigned long mpc512x_find_ips_freq(struct device_node *node);
+extern void __init mpc512x_init_IRQ(void);
+void __init mpc512x_declare_of_platform_devices(void);
+#endif /* __MPC512X_H__ */
diff --git a/arch/powerpc/platforms/512x/mpc512x_shared.c b/arch/powerpc/platforms/512x/mpc512x_shared.c
new file mode 100644
index 00000000000..d8cd579f319
--- /dev/null
+++ b/arch/powerpc/platforms/512x/mpc512x_shared.c
@@ -0,0 +1,83 @@
+/*
+ * Copyright (C) 2007,2008 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Author: John Rigby <jrigby@freescale.com>
+ *
+ * Description:
+ * MPC512x Shared code
+ *
+ * This is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/of_platform.h>
+
+#include <asm/machdep.h>
+#include <asm/ipic.h>
+#include <asm/prom.h>
+#include <asm/time.h>
+
+#include "mpc512x.h"
+
+unsigned long
+mpc512x_find_ips_freq(struct device_node *node)
+{
+ struct device_node *np;
+ const unsigned int *p_ips_freq = NULL;
+
+ of_node_get(node);
+ while (node) {
+ p_ips_freq = of_get_property(node, "bus-frequency", NULL);
+ if (p_ips_freq)
+ break;
+
+ np = of_get_parent(node);
+ of_node_put(node);
+ node = np;
+ }
+ if (node)
+ of_node_put(node);
+
+ return p_ips_freq ? *p_ips_freq : 0;
+}
+EXPORT_SYMBOL(mpc512x_find_ips_freq);
+
+void __init mpc512x_init_IRQ(void)
+{
+ struct device_node *np;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-ipic");
+ if (!np)
+ return;
+
+ ipic_init(np, 0);
+ of_node_put(np);
+
+ /*
+ * Initialize the default interrupt mapping priorities,
+ * in case the boot rom changed something on us.
+ */
+ ipic_set_default_priority();
+}
+
+/*
+ * Nodes to do bus probe on, soc and localbus
+ */
+static struct of_device_id __initdata of_bus_ids[] = {
+ { .compatible = "fsl,mpc5121-immr", },
+ { .compatible = "fsl,mpc5121-localbus", },
+ {},
+};
+
+void __init mpc512x_declare_of_platform_devices(void)
+{
+ if (of_platform_bus_probe(NULL, of_bus_ids, NULL))
+ printk(KERN_ERR __FILE__ ": "
+ "Error while probing of_platform bus\n");
+}
+
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pci.c b/arch/powerpc/platforms/52xx/mpc52xx_pci.c
index e3428ddd904..5a382bb15f6 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_pci.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_pci.c
@@ -63,6 +63,7 @@
#define MPC52xx_PCI_TCR_P 0x01000000
#define MPC52xx_PCI_TCR_LD 0x00010000
+#define MPC52xx_PCI_TCR_WCT8 0x00000008
#define MPC52xx_PCI_TBATR_DISABLE 0x0
#define MPC52xx_PCI_TBATR_ENABLE 0x1
@@ -313,7 +314,7 @@ mpc52xx_pci_setup(struct pci_controller *hose,
out_be32(&pci_regs->tbatr1,
MPC52xx_PCI_TBATR_ENABLE | MPC52xx_PCI_TARGET_MEM );
- out_be32(&pci_regs->tcr, MPC52xx_PCI_TCR_LD);
+ out_be32(&pci_regs->tcr, MPC52xx_PCI_TCR_LD | MPC52xx_PCI_TCR_WCT8);
tmp = in_be32(&pci_regs->gscr);
#if 0
diff --git a/arch/powerpc/sysdev/bestcomm/bestcomm.c b/arch/powerpc/sysdev/bestcomm/bestcomm.c
index 64ec7d62936..446c9ea85b3 100644
--- a/arch/powerpc/sysdev/bestcomm/bestcomm.c
+++ b/arch/powerpc/sysdev/bestcomm/bestcomm.c
@@ -443,7 +443,7 @@ mpc52xx_bcom_probe(struct of_device *op, const struct of_device_id *match)
/* Done ! */
printk(KERN_INFO "DMA: MPC52xx BestComm engine @%08lx ok !\n",
- bcom_eng->regs_base);
+ (long)bcom_eng->regs_base);
return 0;
diff --git a/arch/powerpc/sysdev/bestcomm/gen_bd.c b/arch/powerpc/sysdev/bestcomm/gen_bd.c
index 8d33eafbb3f..a3a134c35b0 100644
--- a/arch/powerpc/sysdev/bestcomm/gen_bd.c
+++ b/arch/powerpc/sysdev/bestcomm/gen_bd.c
@@ -20,6 +20,7 @@
#include <asm/io.h>
#include <asm/mpc52xx.h>
+#include <asm/mpc52xx_psc.h>
#include "bestcomm.h"
#include "bestcomm_priv.h"
@@ -253,6 +254,100 @@ bcom_gen_bd_tx_release(struct bcom_task *tsk)
}
EXPORT_SYMBOL_GPL(bcom_gen_bd_tx_release);
+/* ---------------------------------------------------------------------
+ * PSC support code
+ */
+
+/**
+ * bcom_psc_parameters - Bestcomm initialization value table for PSC devices
+ *
+ * This structure is only used internally. It is a lookup table for PSC
+ * specific parameters to bestcomm tasks.
+ */
+static struct bcom_psc_params {
+ int rx_initiator;
+ int rx_ipr;
+ int tx_initiator;
+ int tx_ipr;
+} bcom_psc_params[] = {
+ [0] = {
+ .rx_initiator = BCOM_INITIATOR_PSC1_RX,
+ .rx_ipr = BCOM_IPR_PSC1_RX,
+ .tx_initiator = BCOM_INITIATOR_PSC1_TX,
+ .tx_ipr = BCOM_IPR_PSC1_TX,
+ },
+ [1] = {
+ .rx_initiator = BCOM_INITIATOR_PSC2_RX,
+ .rx_ipr = BCOM_IPR_PSC2_RX,
+ .tx_initiator = BCOM_INITIATOR_PSC2_TX,
+ .tx_ipr = BCOM_IPR_PSC2_TX,
+ },
+ [2] = {
+ .rx_initiator = BCOM_INITIATOR_PSC3_RX,
+ .rx_ipr = BCOM_IPR_PSC3_RX,
+ .tx_initiator = BCOM_INITIATOR_PSC3_TX,
+ .tx_ipr = BCOM_IPR_PSC3_TX,
+ },
+ [3] = {
+ .rx_initiator = BCOM_INITIATOR_PSC4_RX,
+ .rx_ipr = BCOM_IPR_PSC4_RX,
+ .tx_initiator = BCOM_INITIATOR_PSC4_TX,
+ .tx_ipr = BCOM_IPR_PSC4_TX,
+ },
+ [4] = {
+ .rx_initiator = BCOM_INITIATOR_PSC5_RX,
+ .rx_ipr = BCOM_IPR_PSC5_RX,
+ .tx_initiator = BCOM_INITIATOR_PSC5_TX,
+ .tx_ipr = BCOM_IPR_PSC5_TX,
+ },
+ [5] = {
+ .rx_initiator = BCOM_INITIATOR_PSC6_RX,
+ .rx_ipr = BCOM_IPR_PSC6_RX,
+ .tx_initiator = BCOM_INITIATOR_PSC6_TX,
+ .tx_ipr = BCOM_IPR_PSC6_TX,
+ },
+};
+
+/**
+ * bcom_psc_gen_bd_rx_init - Allocate a receive bcom_task for a PSC port
+ * @psc_num: Number of the PSC to allocate a task for
+ * @queue_len: number of buffer descriptors to allocate for the task
+ * @fifo: physical address of FIFO register
+ * @maxbufsize: Maximum receive data size in bytes.
+ *
+ * Allocate a bestcomm task structure for receiving data from a PSC.
+ */
+struct bcom_task * bcom_psc_gen_bd_rx_init(unsigned psc_num, int queue_len,
+ phys_addr_t fifo, int maxbufsize)
+{
+ if (psc_num >= MPC52xx_PSC_MAXNUM)
+ return NULL;
+
+ return bcom_gen_bd_rx_init(queue_len, fifo,
+ bcom_psc_params[psc_num].rx_initiator,
+ bcom_psc_params[psc_num].rx_ipr,
+ maxbufsize);
+}
+EXPORT_SYMBOL_GPL(bcom_psc_gen_bd_rx_init);
+
+/**
+ * bcom_psc_gen_bd_tx_init - Allocate a transmit bcom_task for a PSC port
+ * @psc_num: Number of the PSC to allocate a task for
+ * @queue_len: number of buffer descriptors to allocate for the task
+ * @fifo: physical address of FIFO register
+ *
+ * Allocate a bestcomm task structure for transmitting data to a PSC.
+ */
+struct bcom_task *
+bcom_psc_gen_bd_tx_init(unsigned psc_num, int queue_len, phys_addr_t fifo)
+{
+ struct psc;
+ return bcom_gen_bd_tx_init(queue_len, fifo,
+ bcom_psc_params[psc_num].tx_initiator,
+ bcom_psc_params[psc_num].tx_ipr);
+}
+EXPORT_SYMBOL_GPL(bcom_psc_gen_bd_tx_init);
+
MODULE_DESCRIPTION("BestComm General Buffer Descriptor tasks driver");
MODULE_AUTHOR("Jeff Gibbons <jeff.gibbons@appspec.com>");
diff --git a/arch/powerpc/sysdev/bestcomm/gen_bd.h b/arch/powerpc/sysdev/bestcomm/gen_bd.h
index 5b6fa803c6a..de47260e69d 100644
--- a/arch/powerpc/sysdev/bestcomm/gen_bd.h
+++ b/arch/powerpc/sysdev/bestcomm/gen_bd.h
@@ -44,5 +44,10 @@ extern void
bcom_gen_bd_tx_release(struct bcom_task *tsk);
+/* PSC support utility wrappers */
+struct bcom_task * bcom_psc_gen_bd_rx_init(unsigned psc_num, int queue_len,
+ phys_addr_t fifo, int maxbufsize);
+struct bcom_task * bcom_psc_gen_bd_tx_init(unsigned psc_num, int queue_len,
+ phys_addr_t fifo);
#endif /* __BESTCOMM_GEN_BD_H__ */
diff --git a/arch/powerpc/sysdev/bestcomm/sram.c b/arch/powerpc/sysdev/bestcomm/sram.c
index 99784383a84..5d74ef7a651 100644
--- a/arch/powerpc/sysdev/bestcomm/sram.c
+++ b/arch/powerpc/sysdev/bestcomm/sram.c
@@ -86,7 +86,7 @@ int bcom_sram_init(struct device_node *sram_node, char *owner)
if (!bcom_sram->base_virt) {
printk(KERN_ERR "%s: bcom_sram_init: "
"Map error SRAM zone 0x%08lx (0x%0x)!\n",
- owner, bcom_sram->base_phys, bcom_sram->size );
+ owner, (long)bcom_sram->base_phys, bcom_sram->size );
rv = -ENOMEM;
goto error_release;
}
diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index ca54563d5c7..ebcec7362f9 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -414,139 +414,6 @@ err:
arch_initcall(gfar_of_init);
-#ifdef CONFIG_I2C_BOARDINFO
-#include <linux/i2c.h>
-struct i2c_driver_device {
- char *of_device;
- char *i2c_type;
-};
-
-static struct i2c_driver_device i2c_devices[] __initdata = {
- {"ricoh,rs5c372a", "rs5c372a"},
- {"ricoh,rs5c372b", "rs5c372b"},
- {"ricoh,rv5c386", "rv5c386"},
- {"ricoh,rv5c387a", "rv5c387a"},
- {"dallas,ds1307", "ds1307"},
- {"dallas,ds1337", "ds1337"},
- {"dallas,ds1338", "ds1338"},
- {"dallas,ds1339", "ds1339"},
- {"dallas,ds1340", "ds1340"},
- {"stm,m41t00", "m41t00"},
- {"dallas,ds1374", "ds1374"},
- {"cirrus,cs4270", "cs4270"},
-};
-
-static int __init of_find_i2c_driver(struct device_node *node,
- struct i2c_board_info *info)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(i2c_devices); i++) {
- if (!of_device_is_compatible(node, i2c_devices[i].of_device))
- continue;
- if (strlcpy(info->type, i2c_devices[i].i2c_type,
- I2C_NAME_SIZE) >= I2C_NAME_SIZE)
- return -ENOMEM;
- return 0;
- }
-
- pr_warning("fsl_soc.c: unrecognized i2c node %s\n",
- (const char *) of_get_property(node, "compatible", NULL));
-
- return -ENODEV;
-}
-
-static void __init of_register_i2c_devices(struct device_node *adap_node,
- int bus_num)
-{
- struct device_node *node = NULL;
-
- while ((node = of_get_next_child(adap_node, node))) {
- struct i2c_board_info info = {};
- const u32 *addr;
- int len;
-
- addr = of_get_property(node, "reg", &len);
- if (!addr || len < sizeof(int) || *addr > (1 << 10) - 1) {
- printk(KERN_WARNING "fsl_soc.c: invalid i2c device entry\n");
- continue;
- }
-
- info.irq = irq_of_parse_and_map(node, 0);
- if (info.irq == NO_IRQ)
- info.irq = -1;
-
- if (of_find_i2c_driver(node, &info) < 0)
- continue;
-
- info.addr = *addr;
-
- i2c_register_board_info(bus_num, &info, 1);
- }
-}
-
-static int __init fsl_i2c_of_init(void)
-{
- struct device_node *np;
- unsigned int i = 0;
- struct platform_device *i2c_dev;
- int ret;
-
- for_each_compatible_node(np, NULL, "fsl-i2c") {
- struct resource r[2];
- struct fsl_i2c_platform_data i2c_data;
- const unsigned char *flags = NULL;
- int idx;
- const u32 *iprop;
-
- memset(&r, 0, sizeof(r));
- memset(&i2c_data, 0, sizeof(i2c_data));
-
- ret = of_address_to_resource(np, 0, &r[0]);
- if (ret)
- goto err;
-
- of_irq_to_resource(np, 0, &r[1]);
-
- iprop = of_get_property(np, "cell-index", NULL);
- idx = iprop ? *iprop : i;
-
- i2c_dev = platform_device_register_simple("fsl-i2c", idx, r, 2);
- if (IS_ERR(i2c_dev)) {
- ret = PTR_ERR(i2c_dev);
- goto err;
- }
-
- i2c_data.device_flags = 0;
- flags = of_get_property(np, "dfsrr", NULL);
- if (flags)
- i2c_data.device_flags |= FSL_I2C_DEV_SEPARATE_DFSRR;
-
- flags = of_get_property(np, "fsl5200-clocking", NULL);
- if (flags)
- i2c_data.device_flags |= FSL_I2C_DEV_CLOCK_5200;
-
- ret =
- platform_device_add_data(i2c_dev, &i2c_data,
- sizeof(struct
- fsl_i2c_platform_data));
- if (ret)
- goto unreg;
-
- of_register_i2c_devices(np, idx);
- i++;
- }
-
- return 0;
-
-unreg:
- platform_device_unregister(i2c_dev);
-err:
- return ret;
-}
-
-arch_initcall(fsl_i2c_of_init);
-#endif
#ifdef CONFIG_PPC_83xx
static int __init mpc83xx_wdt_init(void)
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-28 18:17:26 +0000