diff options
Diffstat (limited to 'arch')
85 files changed, 1041 insertions, 633 deletions
diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c index 90ae00b631c..9dff07c80dd 100644 --- a/arch/arm/common/locomo.c +++ b/arch/arm/common/locomo.c @@ -290,7 +290,7 @@ static int locomo_suspend(struct platform_device *dev, pm_message_t state) save->LCM_GPO = locomo_readl(lchip->base + LOCOMO_GPO); /* GPIO */ locomo_writel(0x00, lchip->base + LOCOMO_GPO); save->LCM_SPICT = locomo_readl(lchip->base + LOCOMO_SPI + LOCOMO_SPICT); /* SPI */ - locomo_writel(0x40, lchip->base + LOCOMO_SPICT); + locomo_writel(0x40, lchip->base + LOCOMO_SPI + LOCOMO_SPICT); save->LCM_GPE = locomo_readl(lchip->base + LOCOMO_GPE); /* GPIO */ locomo_writel(0x00, lchip->base + LOCOMO_GPE); save->LCM_ASD = locomo_readl(lchip->base + LOCOMO_ASD); /* ADSTART */ @@ -418,7 +418,7 @@ __locomo_probe(struct device *me, struct resource *mem, int irq) /* Longtime timer */ locomo_writel(0, lchip->base + LOCOMO_LTINT); /* SPI */ - locomo_writel(0, lchip->base + LOCOMO_SPIIE); + locomo_writel(0, lchip->base + LOCOMO_SPI + LOCOMO_SPIIE); locomo_writel(6 + 8 + 320 + 30 - 10, lchip->base + LOCOMO_ASD); r = locomo_readl(lchip->base + LOCOMO_ASD); @@ -707,7 +707,7 @@ void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int udelay(DAC_SCL_HIGH_HOLD_TIME); /* 4.7 usec */ if (locomo_readl(mapbase + LOCOMO_DAC) & LOCOMO_DAC_SDAOEB) { /* High is error */ printk(KERN_WARNING "locomo: m62332_senddata Error 1\n"); - return; + goto out; } /* Send Sub address (LSB is channel select) */ @@ -735,7 +735,7 @@ void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int udelay(DAC_SCL_HIGH_HOLD_TIME); /* 4.7 usec */ if (locomo_readl(mapbase + LOCOMO_DAC) & LOCOMO_DAC_SDAOEB) { /* High is error */ printk(KERN_WARNING "locomo: m62332_senddata Error 2\n"); - return; + goto out; } /* Send DAC data */ @@ -760,9 +760,9 @@ void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int udelay(DAC_SCL_HIGH_HOLD_TIME); /* 4.7 usec */ if (locomo_readl(mapbase + LOCOMO_DAC) & LOCOMO_DAC_SDAOEB) { /* High is error */ printk(KERN_WARNING "locomo: m62332_senddata Error 3\n"); - return; } +out: /* stop */ r = locomo_readl(mapbase + LOCOMO_DAC); r &= ~(LOCOMO_DAC_SCLOEB); diff --git a/arch/arm/mach-ixp23xx/include/mach/memory.h b/arch/arm/mach-ixp23xx/include/mach/memory.h index 94a3a86cfeb..6ef65d813f1 100644 --- a/arch/arm/mach-ixp23xx/include/mach/memory.h +++ b/arch/arm/mach-ixp23xx/include/mach/memory.h @@ -19,7 +19,7 @@ */ #define PHYS_OFFSET (0x00000000) -#define IXP23XX_PCI_SDRAM_OFFSET (*((volatile int *)IXP23XX_PCI_SDRAM_BAR) & 0xfffffff0)) +#define IXP23XX_PCI_SDRAM_OFFSET (*((volatile int *)IXP23XX_PCI_SDRAM_BAR) & 0xfffffff0) #define __phys_to_bus(x) ((x) + (IXP23XX_PCI_SDRAM_OFFSET - PHYS_OFFSET)) #define __bus_to_phys(x) ((x) - (IXP23XX_PCI_SDRAM_OFFSET - PHYS_OFFSET)) diff --git a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c index 0358f45766c..5e6f711b1c6 100644 --- a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c +++ b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c @@ -74,9 +74,9 @@ static struct gpio_keys_button mv88f6281gtw_ge_button_pins[] = { .desc = "SWR Button", .active_low = 1, }, { - .code = KEY_F1, + .code = KEY_WPS_BUTTON, .gpio = 46, - .desc = "WPS Button(F1)", + .desc = "WPS Button", .active_low = 1, }, }; diff --git a/arch/arm/mach-mmp/include/mach/uncompress.h b/arch/arm/mach-mmp/include/mach/uncompress.h index a7dcc530721..85bd8a2d84b 100644 --- a/arch/arm/mach-mmp/include/mach/uncompress.h +++ b/arch/arm/mach-mmp/include/mach/uncompress.h @@ -14,7 +14,7 @@ #define UART2_BASE (APB_PHYS_BASE + 0x17000) #define UART3_BASE (APB_PHYS_BASE + 0x18000) -static volatile unsigned long *UART = (unsigned long *)UART2_BASE; +static volatile unsigned long *UART; static inline void putc(char c) { @@ -37,6 +37,9 @@ static inline void flush(void) static inline void arch_decomp_setup(void) { + /* default to UART2 */ + UART = (unsigned long *)UART2_BASE; + if (machine_is_avengers_lite()) UART = (unsigned long *)UART3_BASE; } diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c index cb0feca193d..f9f222ebb7e 100644 --- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c +++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c @@ -77,7 +77,7 @@ static struct gpio_keys_button wrt350n_v2_buttons[] = { .desc = "Reset Button", .active_low = 1, }, { - .code = KEY_WLAN, + .code = KEY_WPS_BUTTON, .gpio = 2, .desc = "WPS Button", .active_low = 1, diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 38fbd0a0e40..5b6ee46fa7f 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -272,7 +272,6 @@ config MACH_H5000 config MACH_HIMALAYA bool "HTC Himalaya Support" select CPU_PXA26x - select FB_W100 config MACH_MAGICIAN bool "Enable HTC Magician Support" @@ -454,6 +453,13 @@ config PXA_SHARPSL config SHARPSL_PM bool select APM_EMULATION + select SHARPSL_PM_MAX1111 + +config SHARPSL_PM_MAX1111 + bool + depends on !CORGI_SSP_DEPRECATED + select HWMON + select SENSORS_MAX1111 config CORGI_SSP_DEPRECATED bool @@ -547,7 +553,6 @@ config MACH_E740 bool "Toshiba e740" default y depends on ARCH_PXA_ESERIES - select FB_W100 help Say Y here if you intend to run this kernel on a Toshiba e740 family PDA. @@ -556,7 +561,6 @@ config MACH_E750 bool "Toshiba e750" default y depends on ARCH_PXA_ESERIES - select FB_W100 help Say Y here if you intend to run this kernel on a Toshiba e750 family PDA. @@ -573,7 +577,6 @@ config MACH_E800 bool "Toshiba e800" default y depends on ARCH_PXA_ESERIES - select FB_W100 help Say Y here if you intend to run this kernel on a Toshiba e800 family PDA. diff --git a/arch/arm/mach-pxa/imote2.c b/arch/arm/mach-pxa/imote2.c index b2f878bd460..5161dca8ccc 100644 --- a/arch/arm/mach-pxa/imote2.c +++ b/arch/arm/mach-pxa/imote2.c @@ -559,10 +559,6 @@ static void __init imote2_init(void) pxa_set_btuart_info(NULL); pxa_set_stuart_info(NULL); - /* SPI chip select directions - all other directions should - * be handled by drivers.*/ - gpio_direction_output(37, 0); - platform_add_devices(imote2_devices, ARRAY_SIZE(imote2_devices)); pxa2xx_set_spi_info(1, &pxa_ssp_master_0_info); diff --git a/arch/arm/mach-pxa/include/mach/uncompress.h b/arch/arm/mach-pxa/include/mach/uncompress.h index 5ef91d9d17e..759b851ec98 100644 --- a/arch/arm/mach-pxa/include/mach/uncompress.h +++ b/arch/arm/mach-pxa/include/mach/uncompress.h @@ -16,9 +16,9 @@ #define BTUART_BASE (0x40200000) #define STUART_BASE (0x40700000) -static unsigned long uart_base = FFUART_BASE; -static unsigned int uart_shift = 2; -static unsigned int uart_is_pxa = 1; +static unsigned long uart_base; +static unsigned int uart_shift; +static unsigned int uart_is_pxa; static inline unsigned char uart_read(int offset) { @@ -56,6 +56,11 @@ static inline void flush(void) static inline void arch_decomp_setup(void) { + /* initialize to default */ + uart_base = FFUART_BASE; + uart_shift = 2; + uart_is_pxa = 1; + if (machine_is_littleton() || machine_is_intelmote2() || machine_is_csb726() || machine_is_stargate2() || machine_is_cm_x300() || machine_is_balloon3()) diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index 3184bdc1452..44bb675e47f 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -37,8 +37,6 @@ #include <linux/lis3lv02d.h> #include <linux/pda_power.h> #include <linux/power_supply.h> -#include <linux/pda_power.h> -#include <linux/power_supply.h> #include <linux/regulator/max8660.h> #include <linux/regulator/machine.h> #include <linux/regulator/fixed.h> @@ -444,7 +442,7 @@ static struct gpio_keys_button gpio_keys_button[] = { .active_low = 0, .wakeup = 0, .debounce_interval = 5, /* ms */ - .desc = "on/off button", + .desc = "on_off button", }, }; diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c index a98a434f011..2041eb1d90b 100644 --- a/arch/arm/mach-pxa/stargate2.c +++ b/arch/arm/mach-pxa/stargate2.c @@ -764,11 +764,6 @@ static void __init stargate2_init(void) pxa_set_btuart_info(NULL); pxa_set_stuart_info(NULL); - /* spi chip selects */ - gpio_direction_output(37, 0); - gpio_direction_output(24, 0); - gpio_direction_output(39, 0); - platform_add_devices(ARRAY_AND_SIZE(stargate2_devices)); pxa2xx_set_spi_info(1, &pxa_ssp_master_0_info); diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index 31c2f4c30a9..1536f1784ca 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -12,7 +12,7 @@ # # http://www.arm.linux.org.uk/developer/machines/?action=new # -# Last update: Sat Feb 20 14:16:15 2010 +# Last update: Sat Mar 20 15:35:41 2010 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -2663,7 +2663,7 @@ reb01 MACH_REB01 REB01 2675 aquila MACH_AQUILA AQUILA 2676 spark_sls_hw2 MACH_SPARK_SLS_HW2 SPARK_SLS_HW2 2677 sheeva_esata MACH_ESATA_SHEEVAPLUG ESATA_SHEEVAPLUG 2678 -surf7x30 MACH_SURF7X30 SURF7X30 2679 +msm7x30_surf MACH_MSM7X30_SURF MSM7X30_SURF 2679 micro2440 MACH_MICRO2440 MICRO2440 2680 am2440 MACH_AM2440 AM2440 2681 tq2440 MACH_TQ2440 TQ2440 2682 @@ -2678,3 +2678,74 @@ vc088x MACH_VC088X VC088X 2690 mioa702 MACH_MIOA702 MIOA702 2691 hpmin MACH_HPMIN HPMIN 2692 ak880xak MACH_AK880XAK AK880XAK 2693 +arm926tomap850 MACH_ARM926TOMAP850 ARM926TOMAP850 2694 +lkevm MACH_LKEVM LKEVM 2695 +mw6410 MACH_MW6410 MW6410 2696 +terastation_wxl MACH_TERASTATION_WXL TERASTATION_WXL 2697 +cpu8000e MACH_CPU8000E CPU8000E 2698 +catania MACH_CATANIA CATANIA 2699 +tokyo MACH_TOKYO TOKYO 2700 +msm7201a_surf MACH_MSM7201A_SURF MSM7201A_SURF 2701 +msm7201a_ffa MACH_MSM7201A_FFA MSM7201A_FFA 2702 +msm7x25_surf MACH_MSM7X25_SURF MSM7X25_SURF 2703 +msm7x25_ffa MACH_MSM7X25_FFA MSM7X25_FFA 2704 +msm7x27_surf MACH_MSM7X27_SURF MSM7X27_SURF 2705 +msm7x27_ffa MACH_MSM7X27_FFA MSM7X27_FFA 2706 +msm7x30_ffa MACH_MSM7X30_FFA MSM7X30_FFA 2707 +qsd8x50_surf MACH_QSD8X50_SURF QSD8X50_SURF 2708 +qsd8x50_comet MACH_QSD8X50_COMET QSD8X50_COMET 2709 +qsd8x50_ffa MACH_QSD8X50_FFA QSD8X50_FFA 2710 +qsd8x50a_surf MACH_QSD8X50A_SURF QSD8X50A_SURF 2711 +qsd8x50a_ffa MACH_QSD8X50A_FFA QSD8X50A_FFA 2712 +adx_xgcp10 MACH_ADX_XGCP10 ADX_XGCP10 2713 +mcgwumts2a MACH_MCGWUMTS2A MCGWUMTS2A 2714 +mobikt MACH_MOBIKT MOBIKT 2715 +mx53_evk MACH_MX53_EVK MX53_EVK 2716 +igep0030 MACH_IGEP0030 IGEP0030 2717 +axell_h40_h50_ctrl MACH_AXELL_H40_H50_CTRL AXELL_H40_H50_CTRL 2718 +dtcommod MACH_DTCOMMOD DTCOMMOD 2719 +gould MACH_GOULD GOULD 2720 +siberia MACH_SIBERIA SIBERIA 2721 +sbc3530 MACH_SBC3530 SBC3530 2722 +qarm MACH_QARM QARM 2723 +mips MACH_MIPS MIPS 2724 +mx27grb MACH_MX27GRB MX27GRB 2725 +sbc8100 MACH_SBC8100 SBC8100 2726 +saarb MACH_SAARB SAARB 2727 +omap3mini MACH_OMAP3MINI OMAP3MINI 2728 +cnmbook7se MACH_CNMBOOK7SE CNMBOOK7SE 2729 +catan MACH_CATAN CATAN 2730 +harmony MACH_HARMONY HARMONY 2731 +tonga MACH_TONGA TONGA 2732 +cybook_orizon MACH_CYBOOK_ORIZON CYBOOK_ORIZON 2733 +htcrhodiumcdma MACH_HTCRHODIUMCDMA HTCRHODIUMCDMA 2734 +epc_g45 MACH_EPC_G45 EPC_G45 2735 +epc_lpc3250 MACH_EPC_LPC3250 EPC_LPC3250 2736 +mxc91341evb MACH_MXC91341EVB MXC91341EVB 2737 +rtw1000 MACH_RTW1000 RTW1000 2738 +bobcat MACH_BOBCAT BOBCAT 2739 +trizeps6 MACH_TRIZEPS6 TRIZEPS6 2740 +msm7x30_fluid MACH_MSM7X30_FLUID MSM7X30_FLUID 2741 +nedap9263 MACH_NEDAP9263 NEDAP9263 2742 +netgear_ms2110 MACH_NETGEAR_MS2110 NETGEAR_MS2110 2743 +bmx MACH_BMX BMX 2744 +netstream MACH_NETSTREAM NETSTREAM 2745 +vpnext_rcu MACH_VPNEXT_RCU VPNEXT_RCU 2746 +vpnext_mpu MACH_VPNEXT_MPU VPNEXT_MPU 2747 +bcmring_tablet_v1 MACH_BCMRING_TABLET_V1 BCMRING_TABLET_V1 2748 +sgarm10 MACH_SGARM10 SGARM10 2749 +cm_t3517 MACH_CM_T3517 CM_T3517 2750 +omap3_cps MACH_OMAP3_CPS OMAP3_CPS 2751 +axar1500_receiver MACH_AXAR1500_RECEIVER AXAR1500_RECEIVER 2752 +wbd222 MACH_WBD222 WBD222 2753 +mt65xx MACH_MT65XX MT65XX 2754 +msm8x60_surf MACH_MSM8X60_SURF MSM8X60_SURF 2755 +msm8x60_sim MACH_MSM8X60_SIM MSM8X60_SIM 2756 +vmc300 MACH_VMC300 VMC300 2757 +tcc8000_sdk MACH_TCC8000_SDK TCC8000_SDK 2758 +nanos MACH_NANOS NANOS 2759 +stamp9g10 MACH_STAMP9G10 STAMP9G10 2760 +stamp9g45 MACH_STAMP9G45 STAMP9G45 2761 +h6053 MACH_H6053 H6053 2762 +smint01 MACH_SMINT01 SMINT01 2763 +prtlvt2 MACH_PRTLVT2 PRTLVT2 2764 diff --git a/arch/cris/arch-v32/drivers/pci/bios.c b/arch/cris/arch-v32/drivers/pci/bios.c index d4b9c36ddc0..bc0cfdad1cb 100644 --- a/arch/cris/arch-v32/drivers/pci/bios.c +++ b/arch/cris/arch-v32/drivers/pci/bios.c @@ -50,7 +50,7 @@ pcibios_align_resource(void *data, const struct resource *res, if ((res->flags & IORESOURCE_IO) && (start & 0x300)) start = (start + 0x3ff) & ~0x3ff; - return start + return start; } int pcibios_enable_resources(struct pci_dev *dev, int mask) diff --git a/arch/frv/mb93090-mb00/pci-frv.c b/arch/frv/mb93090-mb00/pci-frv.c index 1ed15d7fea2..6b4fb28e9f9 100644 --- a/arch/frv/mb93090-mb00/pci-frv.c +++ b/arch/frv/mb93090-mb00/pci-frv.c @@ -41,7 +41,7 @@ pcibios_align_resource(void *data, const struct resource *res, if ((res->flags & IORESOURCE_IO) && (start & 0x300)) start = (start + 0x3ff) & ~0x3ff; - return start + return start; } @@ -94,8 +94,7 @@ static void __init pcibios_allocate_bus_resources(struct list_head *bus_list) r = &dev->resource[idx]; if (!r->start) continue; - if (pci_claim_resource(dev, idx) < 0) - printk(KERN_ERR "PCI: Cannot allocate resource region %d of bridge %s\n", idx, pci_name(dev)); + pci_claim_resource(dev, idx); } } pcibios_allocate_bus_resources(&bus->children); @@ -125,7 +124,6 @@ static void __init pcibios_allocate_resources(int pass) DBG("PCI: Resource %08lx-%08lx (f=%lx, d=%d, p=%d)\n", r->start, r->end, r->flags, disabled, pass); if (pci_claim_resource(dev, idx) < 0) { - printk(KERN_ERR "PCI: Cannot allocate resource region %d of device %s\n", idx, pci_name(dev)); /* We'll assign a new address later */ r->end -= r->start; r->start = 0; diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig index 203ec61c6d4..76818f92653 100644 --- a/arch/microblaze/Kconfig +++ b/arch/microblaze/Kconfig @@ -75,9 +75,6 @@ config LOCKDEP_SUPPORT config HAVE_LATENCYTOP_SUPPORT def_bool y -config PCI - def_bool n - config DTC def_bool y diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile index 836832dd9b2..72f6e858374 100644 --- a/arch/microblaze/Makefile +++ b/arch/microblaze/Makefile @@ -84,7 +84,7 @@ define archhelp echo '* linux.bin - Create raw binary' echo ' linux.bin.gz - Create compressed raw binary' echo ' simpleImage.<dt> - ELF image with $(arch)/boot/dts/<dt>.dts linked in' - echo ' - stripped elf with fdt blob + echo ' - stripped elf with fdt blob' echo ' simpleImage.<dt>.unstrip - full ELF image with fdt blob' echo ' *_defconfig - Select default config from arch/microblaze/configs' echo '' @@ -94,3 +94,5 @@ define archhelp echo ' name of a dts file from the arch/microblaze/boot/dts/ directory' echo ' (minus the .dts extension).' endef + +MRPROPER_FILES += $(boot)/simpleImage.* diff --git a/arch/microblaze/boot/Makefile b/arch/microblaze/boot/Makefile index 902cf9846c3..57f50c2371c 100644 --- a/arch/microblaze/boot/Makefile +++ b/arch/microblaze/boot/Makefile @@ -23,8 +23,6 @@ $(obj)/system.dtb: $(obj)/$(DTB).dtb endif $(obj)/linux.bin: vmlinux FORCE - [ -n $(CONFIG_INITRAMFS_SOURCE) ] && [ ! -e $(CONFIG_INITRAMFS_SOURCE) ] && \ - touch $(CONFIG_INITRAMFS_SOURCE) || echo "No CPIO image" $(call if_changed,objcopy) $(call if_changed,uimage) @echo 'Kernel: $@ is ready' ' (#'`cat .version`')' @@ -62,6 +60,4 @@ quiet_cmd_dtc = DTC $@ $(obj)/%.dtb: $(dtstree)/%.dts FORCE $(call if_changed,dtc) -clean-kernel += linux.bin linux.bin.gz simpleImage.* - -clean-files += *.dtb simpleImage.*.unstrip +clean-files += *.dtb simpleImage.*.unstrip linux.bin.ub diff --git a/arch/microblaze/include/asm/processor.h b/arch/microblaze/include/asm/processor.h index 563c6b9453f..8eeb09211ec 100644 --- a/arch/microblaze/include/asm/processor.h +++ b/arch/microblaze/include/asm/processor.h @@ -14,7 +14,6 @@ #include <asm/ptrace.h> #include <asm/setup.h> #include <asm/registers.h> -#include <asm/segment.h> #include <asm/entry.h> #include <asm/current.h> diff --git a/arch/microblaze/include/asm/segment.h b/arch/microblaze/include/asm/segment.h deleted file mode 100644 index 0e7102c3fb1..00000000000 --- a/arch/microblaze/include/asm/segment.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu> - * Copyright (C) 2008-2009 PetaLogix - * Copyright (C) 2006 Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _ASM_MICROBLAZE_SEGMENT_H -#define _ASM_MICROBLAZE_SEGMENT_H - -# ifndef __ASSEMBLY__ - -typedef struct { - unsigned long seg; -} mm_segment_t; - -/* - * On Microblaze the fs value is actually the top of the corresponding - * address space. - * - * The fs value determines whether argument validity checking should be - * performed or not. If get_fs() == USER_DS, checking is performed, with - * get_fs() == KERNEL_DS, checking is bypassed. - * - * For historical reasons, these macros are grossly misnamed. - * - * For non-MMU arch like Microblaze, KERNEL_DS and USER_DS is equal. - */ -# define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) - -# ifndef CONFIG_MMU -# define KERNEL_DS MAKE_MM_SEG(0) -# define USER_DS KERNEL_DS -# else -# define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFF) -# define USER_DS MAKE_MM_SEG(TASK_SIZE - 1) -# endif - -# define get_ds() (KERNEL_DS) -# define get_fs() (current_thread_info()->addr_limit) -# define set_fs(val) (current_thread_info()->addr_limit = (val)) - -# define segment_eq(a, b) ((a).seg == (b).seg) - -# endif /* __ASSEMBLY__ */ -#endif /* _ASM_MICROBLAZE_SEGMENT_H */ diff --git a/arch/microblaze/include/asm/thread_info.h b/arch/microblaze/include/asm/thread_info.h index 6e92885d381..b2ca80f6464 100644 --- a/arch/microblaze/include/asm/thread_info.h +++ b/arch/microblaze/include/asm/thread_info.h @@ -19,7 +19,6 @@ #ifndef __ASSEMBLY__ # include <linux/types.h> # include <asm/processor.h> -# include <asm/segment.h> /* * low level task data that entry.S needs immediate access to @@ -60,6 +59,10 @@ struct cpu_context { __u32 fsr; }; +typedef struct { + unsigned long seg; +} mm_segment_t; + struct thread_info { struct task_struct *task; /* main task structure */ struct exec_domain *exec_domain; /* execution domain */ diff --git a/arch/microblaze/include/asm/tlbflush.h b/arch/microblaze/include/asm/tlbflush.h index bcb8b41d55a..2e1353c2d18 100644 --- a/arch/microblaze/include/asm/tlbflush.h +++ b/arch/microblaze/include/asm/tlbflush.h @@ -24,6 +24,7 @@ extern void _tlbie(unsigned long address); extern void _tlbia(void); #define __tlbia() { preempt_disable(); _tlbia(); preempt_enable(); } +#define __tlbie(x) { _tlbie(x); } static inline void local_flush_tlb_all(void) { __tlbia(); } @@ -31,7 +32,7 @@ static inline void local_flush_tlb_mm(struct mm_struct *mm) { __tlbia(); } static inline void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr) - { _tlbie(vmaddr); } + { __tlbie(vmaddr); } static inline void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end) { __tlbia(); } diff --git a/arch/microblaze/include/asm/uaccess.h b/arch/microblaze/include/asm/uaccess.h index 371bd6e56d9..446bec29b14 100644 --- a/arch/microblaze/include/asm/uaccess.h +++ b/arch/microblaze/include/asm/uaccess.h @@ -22,101 +22,73 @@ #include <asm/mmu.h> #include <asm/page.h> #include <asm/pgtable.h> -#include <asm/segment.h> #include <linux/string.h> #define VERIFY_READ 0 #define VERIFY_WRITE 1 -#define __clear_user(addr, n) (memset((void *)(addr), 0, (n)), 0) - -#ifndef CONFIG_MMU - -extern int ___range_ok(unsigned long addr, unsigned long size); - -#define __range_ok(addr, size) \ - ___range_ok((unsigned long)(addr), (unsigned long)(size)) - -#define access_ok(type, addr, size) (__range_ok((addr), (size)) == 0) -#define __access_ok(add, size) (__range_ok((addr), (size)) == 0) - -/* Undefined function to trigger linker error */ -extern int bad_user_access_length(void); - -/* FIXME this is function for optimalization -> memcpy */ -#define __get_user(var, ptr) \ -({ \ - int __gu_err = 0; \ - switch (sizeof(*(ptr))) { \ - case 1: \ - case 2: \ - case 4: \ - (var) = *(ptr); \ - break; \ - case 8: \ - memcpy((void *) &(var), (ptr), 8); \ - break; \ - default: \ - (var) = 0; \ - __gu_err = __get_user_bad(); \ - break; \ - } \ - __gu_err; \ -}) +/* + * On Microblaze the fs value is actually the top of the corresponding + * address space. + * + * The fs value determines whether argument validity checking should be + * performed or not. If get_fs() == USER_DS, checking is performed, with + * get_fs() == KERNEL_DS, checking is bypassed. + * + * For historical reasons, these macros are grossly misnamed. + * + * For non-MMU arch like Microblaze, KERNEL_DS and USER_DS is equal. + */ +# define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) -#define __get_user_bad() (bad_user_access_length(), (-EFAULT)) +# ifndef CONFIG_MMU +# define KERNEL_DS MAKE_MM_SEG(0) +# define USER_DS KERNEL_DS +# else +# define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFF) +# define USER_DS MAKE_MM_SEG(TASK_SIZE - 1) +# endif -/* FIXME is not there defined __pu_val */ -#define __put_user(var, ptr) \ -({ \ - int __pu_err = 0; \ - switch (sizeof(*(ptr))) { \ - case 1: \ - case 2: \ - case 4: \ - *(ptr) = (var); \ - break; \ - case 8: { \ - typeof(*(ptr)) __pu_val = (var); \ - memcpy(ptr, &__pu_val, sizeof(__pu_val)); \ - } \ - break; \ - default: \ - __pu_err = __put_user_bad(); \ - break; \ - } \ - __pu_err; \ -}) +# define get_ds() (KERNEL_DS) +# define get_fs() (current_thread_info()->addr_limit) +# define set_fs(val) (current_thread_info()->addr_limit = (val)) -#define __put_user_bad() (bad_user_access_length(), (-EFAULT)) +# define segment_eq(a, b) ((a).seg == (b).seg) -#define put_user(x, ptr) __put_user((x), (ptr)) -#define get_user(x, ptr) __get_user((x), (ptr)) +/* + * The exception table consists of pairs of addresses: the first is the + * address of an instruction that is allowed to fault, and the second is + * the address at which the program should continue. No registers are + * modified, so it is entirely up to the continuation code to figure out + * what to do. + * + * All the routines below use bits of fixup code that are out of line + * with the main instruction path. This means when everything is well, + * we don't even have to jump over them. Further, they do not intrude + * on our cache or tlb entries. + */ +struct exception_table_entry { + unsigned long insn, fixup; +}; -#define copy_to_user(to, from, n) (memcpy((to), (from), (n)), 0) -#define copy_from_user(to, from, n) (memcpy((to), (from), (n)), 0) +/* Returns 0 if exception not found and fixup otherwise. */ +extern unsigned long search_exception_table(unsigned long); -#define __copy_to_user(to, from, n) (copy_to_user((to), (from), (n))) -#define __copy_from_user(to, from, n) (copy_from_user((to), (from), (n))) -#define __copy_to_user_inatomic(to, from, n) \ - (__copy_to_user((to), (from), (n))) -#define __copy_from_user_inatomic(to, from, n) \ - (__copy_from_user((to), (from), (n))) +#ifndef CONFIG_MMU -static inline unsigned long clear_user(void *addr, unsigned long size) +/* Check against bounds of physical memory */ +static inline int ___range_ok(unsigned long addr, unsigned long size) { - if (access_ok(VERIFY_WRITE, addr, size)) - size = __clear_user(addr, size); - return size; + return ((addr < memory_start) || + ((addr + size) > memory_end)); } -/* Returns 0 if exception not found and fixup otherwise. */ -extern unsigned long search_exception_table(unsigned long); +#define __range_ok(addr, size) \ + ___range_ok((unsigned long)(addr), (unsigned long)(size)) -extern long strncpy_from_user(char *dst, const char *src, long count); -extern long strnlen_user(const char *src, long count); +#define access_ok(type, addr, size) (__range_ok((addr), (size)) == 0) -#else /* CONFIG_MMU */ +#else /* * Address is valid if: @@ -129,24 +101,88 @@ extern long strnlen_user(const char *src, long count); /* || printk("access_ok failed for %s at 0x%08lx (size %d), seg 0x%08x\n", type?"WRITE":"READ",addr,size,get_fs().seg)) */ -/* - * All the __XXX versions macros/functions below do not perform - * access checking. It is assumed that the necessary checks have been - * already performed before the finction (macro) is called. - */ +#endif -#define get_user(x, ptr) \ -({ \ - access_ok(VERIFY_READ, (ptr), sizeof(*(ptr))) \ - ? __get_user((x), (ptr)) : -EFAULT; \ -}) +#ifdef CONFIG_MMU +# define __FIXUP_SECTION ".section .fixup,\"ax\"\n" +# define __EX_TABLE_SECTION ".section __ex_table,\"a\"\n" +#else +# define __FIXUP_SECTION ".section .discard,\"ax\"\n" +# define __EX_TABLE_SECTION ".section .discard,\"a\"\n" +#endif -#define put_user(x, ptr) \ -({ \ - access_ok(VERIFY_WRITE, (ptr), sizeof(*(ptr))) \ - ? __put_user((x), (ptr)) : -EFAULT; \ +extern unsigned long __copy_tofrom_user(void __user *to, + const void __user *from, unsigned long size); + +/* Return: number of not copied bytes, i.e. 0 if OK or non-zero if fail. */ +static inline unsigned long __must_check __clear_user(void __user *to, + unsigned long n) +{ + /* normal memset with two words to __ex_table */ + __asm__ __volatile__ ( \ + "1: sb r0, %2, r0;" \ + " addik %0, %0, -1;" \ + " bneid %0, 1b;" \ + " addik %2, %2, 1;" \ + "2: " \ + __EX_TABLE_SECTION \ + ".word 1b,2b;" \ + ".previous;" \ + : "=r"(n) \ + : "0"(n), "r"(to) + ); + return n; +} + +static inline unsigned long __must_check clear_user(void __user *to, + unsigned long n) +{ + might_sleep(); + if (unlikely(!access_ok(VERIFY_WRITE, to, n))) + return n; + + return __clear_user(to, n); +} + +/* put_user and get_user macros */ +extern long __user_bad(void); + +#define __get_user_asm(insn, __gu_ptr, __gu_val, __gu_err) \ +({ \ + __asm__ __volatile__ ( \ + "1:" insn " %1, %2, r0;" \ + " addk %0, r0, r0;" \ + "2: " \ + __FIXUP_SECTION \ + "3: brid 2b;" \ + " addik %0, r0, %3;" \ + ".previous;" \ + __EX_TABLE_SECTION \ + ".word 1b,3b;" \ + ".previous;" \ + : "=&r"(__gu_err), "=r"(__gu_val) \ + : "r"(__gu_ptr), "i"(-EFAULT) \ + ); \ }) +/** + * get_user: - Get a simple variable from user space. + * @x: Variable to store result. + * @ptr: Source address, in user space. + * + * Context: User context only. This function may sleep. + * + * This macro copies a single simple variable from user space to kernel + * space. It supports simple types like char and int, but not larger + * data types like structures or arrays. + * + * @ptr must have pointer-to-simple-variable type, and the result of + * dereferencing @ptr must be assignable to @x without a cast. + * + * Returns zero on success, or -EFAULT on error. + * On error, the variable @x is set to zero. + */ + #define __get_user(x, ptr) \ ({ \ unsigned long __gu_val; \ @@ -163,30 +199,74 @@ extern long strnlen_user(const char *src, long count); __get_user_asm("lw", (ptr), __gu_val, __gu_err); \ break; \ default: \ - __gu_val = 0; __gu_err = -EINVAL; \ + /* __gu_val = 0; __gu_err = -EINVAL;*/ __gu_err = __user_bad();\ } \ x = (__typeof__(*(ptr))) __gu_val; \ __gu_err; \ }) -#define __get_user_asm(insn, __gu_ptr, __gu_val, __gu_err) \ + +#define get_user(x, ptr) \ ({ \ - __asm__ __volatile__ ( \ - "1:" insn " %1, %2, r0; \ - addk %0, r0, r0; \ - 2: \ - .section .fixup,\"ax\"; \ - 3: brid 2b; \ - addik %0, r0, %3; \ - .previous; \ - .section __ex_table,\"a\"; \ - .word 1b,3b; \ - .previous;" \ - : "=r"(__gu_err), "=r"(__gu_val) \ - : "r"(__gu_ptr), "i"(-EFAULT) \ - ); \ + access_ok(VERIFY_READ, (ptr), sizeof(*(ptr))) \ + ? __get_user((x), (ptr)) : -EFAULT; \ +}) + +#define __put_user_asm(insn, __gu_ptr, __gu_val, __gu_err) \ +({ \ + __asm__ __volatile__ ( \ + "1:" insn " %1, %2, r0;" \ + " addk %0, r0, r0;" \ + "2: " \ + __FIXUP_SECTION \ + "3: brid 2b;" \ + " addik %0, r0, %3;" \ + ".previous;" \ + __EX_TABLE_SECTION \ + ".word 1b,3b;" \ + ".previous;" \ + : "=&r"(__gu_err) \ + : "r"(__gu_val), "r"(__gu_ptr), "i"(-EFAULT) \ + ); \ }) +#define __put_user_asm_8(__gu_ptr, __gu_val, __gu_err) \ +({ \ + __asm__ __volatile__ (" lwi %0, %1, 0;" \ + "1: swi %0, %2, 0;" \ + " lwi %0, %1, 4;" \ + "2: swi %0, %2, 4;" \ + " addk %0, r0, r0;" \ + "3: " \ + __FIXUP_SECTION \ + "4: brid 3b;" \ + " addik %0, r0, %3;" \ + ".previous;" \ + __EX_TABLE_SECTION \ + ".word 1b,4b,2b,4b;" \ + ".previous;" \ + : "=&r"(__gu_err) \ + : "r"(&__gu_val), "r"(__gu_ptr), "i"(-EFAULT) \ + ); \ +}) + +/** + * put_user: - Write a simple value into user space. + * @x: Value to copy to user space. + * @ptr: Destination address, in user space. + * + * Context: User context only. This function may sleep. + * + * This macro copies a single simple value from kernel space to user + * space. It supports simple types like char and int, but not larger + * data types like structures or arrays. + * + * @ptr must have pointer-to-simple-variable type, and @x must be assignable + * to the result of dereferencing @ptr. + * + * Returns zero on success, or -EFAULT on error. + */ + #define __put_user(x, ptr) \ ({ \ __typeof__(*(ptr)) volatile __gu_val = (x); \ @@ -195,7 +275,7 @@ extern long strnlen_user(const char *src, long count); case 1: \ __put_user_asm("sb", (ptr), __gu_val, __gu_err); \ break; \ - case 2: \ + case 2: \ __put_user_asm("sh", (ptr), __gu_val, __gu_err); \ break; \ case 4: \ @@ -205,121 +285,82 @@ extern long strnlen_user(const char *src, long count); __put_user_asm_8((ptr), __gu_val, __gu_err); \ break; \ default: \ - __gu_err = -EINVAL; \ + /*__gu_err = -EINVAL;*/ __gu_err = __user_bad(); \ } \ __gu_err; \ }) -#define __put_user_asm_8(__gu_ptr, __gu_val, __gu_err) \ -({ \ -__asm__ __volatile__ (" lwi %0, %1, 0; \ - 1: swi %0, %2, 0; \ - lwi %0, %1, 4; \ - 2: swi %0, %2, 4; \ - addk %0,r0,r0; \ - 3: \ - .section .fixup,\"ax\"; \ - 4: brid 3b; \ - addik %0, r0, %3; \ - .previous; \ - .section __ex_table,\"a\"; \ - .word 1b,4b,2b,4b; \ - .previous;" \ - : "=&r"(__gu_err) \ - : "r"(&__gu_val), \ - "r"(__gu_ptr), "i"(-EFAULT) \ - ); \ -}) +#ifndef CONFIG_MMU -#define __put_user_asm(insn, __gu_ptr, __gu_val, __gu_err) \ -({ \ - __asm__ __volatile__ ( \ - "1:" insn " %1, %2, r0; \ - addk %0, r0, r0; \ - 2: \ - .section .fixup,\"ax\"; \ - 3: brid 2b; \ - addik %0, r0, %3; \ - .previous; \ - .section __ex_table,\"a\"; \ - .word 1b,3b; \ - .previous;" \ - : "=r"(__gu_err) \ - : "r"(__gu_val), "r"(__gu_ptr), "i"(-EFAULT) \ - ); \ -}) +#define put_user(x, ptr) __put_user((x), (ptr)) -/* - * Return: number of not copied bytes, i.e. 0 if OK or non-zero if fail. - */ -static inline int clear_user(char *to, int size) -{ - if (size && access_ok(VERIFY_WRITE, to, size)) { - __asm__ __volatile__ (" \ - 1: \ - sb r0, %2, r0; \ - addik %0, %0, -1; \ - bneid %0, 1b; \ - addik %2, %2, 1; \ - 2: \ - .section __ex_table,\"a\"; \ - .word 1b,2b; \ - .section .text;" \ - : "=r"(size) \ - : "0"(size), "r"(to) - ); - } - return size; -} +#else /* CONFIG_MMU */ -#define __copy_from_user(to, from, n) copy_from_user((to), (from), (n)) +#define put_user(x, ptr) \ +({ \ + access_ok(VERIFY_WRITE, (ptr), sizeof(*(ptr))) \ + ? __put_user((x), (ptr)) : -EFAULT; \ +}) +#endif /* CONFIG_MMU */ + +/* copy_to_from_user */ +#define __copy_from_user(to, from, n) \ + __copy_tofrom_user((__force void __user *)(to), \ + (void __user *)(from), (n)) #define __copy_from_user_inatomic(to, from, n) \ copy_from_user((to), (from), (n)) -#define copy_to_user(to, from, n) \ - (access_ok(VERIFY_WRITE, (to), (n)) ? \ - __copy_tofrom_user((void __user *)(to), \ - (__force const void __user *)(from), (n)) \ - : -EFAULT) +static inline long copy_from_user(void *to, + const void __user *from, unsigned long n) +{ + might_sleep(); + if (access_ok(VERIFY_READ, from, n)) + return __copy_from_user(to, from, n); + return n; +} -#define __copy_to_user(to, from, n) copy_to_user((to), (from), (n)) +#define __copy_to_user(to, from, n) \ + __copy_tofrom_user((void __user *)(to), \ + (__force const void __user *)(from), (n)) #define __copy_to_user_inatomic(to, from, n) copy_to_user((to), (from), (n)) -#define copy_from_user(to, from, n) \ - (access_ok(VERIFY_READ, (from), (n)) ? \ - __copy_tofrom_user((__force void __user *)(to), \ - (void __user *)(from), (n)) \ - : -EFAULT) +static inline long copy_to_user(void __user *to, + const void *from, unsigned long n) +{ + might_sleep(); + if (access_ok(VERIFY_WRITE, to, n)) + return __copy_to_user(to, from, n); + return n; +} +/* + * Copy a null terminated string from userspace. + */ extern int __strncpy_user(char *to, const char __user *from, int len); -extern int __strnlen_user(const char __user *sstr, int len); -#define strncpy_from_user(to, from, len) \ - (access_ok(VERIFY_READ, from, 1) ? \ - __strncpy_user(to, from, len) : -EFAULT) -#define strnlen_user(str, len) \ - (access_ok(VERIFY_READ, str, 1) ? __strnlen_user(str, len) : 0) +#define __strncpy_from_user __strncpy_user -#endif /* CONFIG_MMU */ - -extern unsigned long __copy_tofrom_user(void __user *to, - const void __user *from, unsigned long size); +static inline long +strncpy_from_user(char *dst, const char __user *src, long count) +{ + if (!access_ok(VERIFY_READ, src, 1)) + return -EFAULT; + return __strncpy_from_user(dst, src, count); +} /* - * The exception table consists of pairs of addresses: the first is the - * address of an instruction that is allowed to fault, and the second is - * the address at which the program should continue. No registers are - * modified, so it is entirely up to the continuation code to figure out - * what to do. + * Return the size of a string (including the ending 0) * - * All the routines below use bits of fixup code that are out of line - * with the main instruction path. This means when everything is well, - * we don't even have to jump over them. Further, they do not intrude - * on our cache or tlb entries. + * Return 0 on exception, a value greater than N if too long */ -struct exception_table_entry { - unsigned long insn, fixup; -}; +extern int __strnlen_user(const char __user *sstr, int len); + +static inline long strnlen_user(const char __user *src, long n) +{ + if (!access_ok(VERIFY_READ, src, 1)) + return 0; + return __strnlen_user(src, n); +} #endif /* __ASSEMBLY__ */ #endif /* __KERNEL__ */ diff --git a/arch/microblaze/kernel/dma.c b/arch/microblaze/kernel/dma.c index b1084974fcc..4d5b0311601 100644 --- a/arch/microblaze/kernel/dma.c +++ b/arch/microblaze/kernel/dma.c @@ -37,7 +37,7 @@ static inline void __dma_sync_page(unsigned long paddr, unsigned long offset, static unsigned long get_dma_direct_offset(struct device *dev) { - if (dev) + if (likely(dev)) return (unsigned long)dev->archdata.dma_data; return PCI_DRAM_OFFSET; /* FIXME Not sure if is correct */ diff --git a/arch/microblaze/kernel/head.S b/arch/microblaze/kernel/head.S index cb7815cfe5a..da6a5f5dc76 100644 --- a/arch/microblaze/kernel/head.S +++ b/arch/microblaze/kernel/head.S @@ -51,6 +51,12 @@ swapper_pg_dir: .text ENTRY(_start) +#if CONFIG_KERNEL_BASE_ADDR == 0 + brai TOPHYS(real_start) + .org 0x100 +real_start: +#endif + mfs r1, rmsr andi r1, r1, ~2 mts rmsr, r1 @@ -99,8 +105,8 @@ no_fdt_arg: tophys(r4,r4) /* convert to phys address */ ori r3, r0, COMMAND_LINE_SIZE - 1 /* number of loops */ _copy_command_line: - lbu r2, r5, r6 /* r7=r5+r6 - r5 contain pointer to command line */ - sb r2, r4, r6 /* addr[r4+r6]= r7*/ + lbu r2, r5, r6 /* r2=r5+r6 - r5 contain pointer to command line */ + sb r2, r4, r6 /* addr[r4+r6]= r2*/ addik r6, r6, 1 /* increment counting */ bgtid r3, _copy_command_line /* loop for all entries */ addik r3, r3, -1 /* descrement loop */ @@ -128,7 +134,7 @@ _copy_bram: * virtual to physical. */ nop - addik r3, r0, 63 /* Invalidate all TLB entries */ + addik r3, r0, MICROBLAZE_TLB_SIZE -1 /* Invalidate all TLB entries */ _invalidate: mts rtlbx, r3 mts rtlbhi, r0 /* flush: ensure V is clear */ diff --git a/arch/microblaze/kernel/hw_exception_handler.S b/arch/microblaze/kernel/hw_exception_handler.S index 2b86c03aa84..995a2123635 100644 --- a/arch/microblaze/kernel/hw_exception_handler.S +++ b/arch/microblaze/kernel/hw_exception_handler.S @@ -313,13 +313,13 @@ _hw_exception_handler: mfs r5, rmsr; nop swi r5, r1, 0; - mfs r3, resr + mfs r4, resr nop - mfs r4, rear; + mfs r3, rear; nop #ifndef CONFIG_MMU - andi r5, r3, 0x1000; /* Check ESR[DS] */ + andi r5, r4, 0x1000; /* Check ESR[DS] */ beqi r5, not_in_delay_slot; /* Branch if ESR[DS] not set */ mfs r17, rbtr; /* ESR[DS] set - return address in BTR */ nop @@ -327,13 +327,14 @@ not_in_delay_slot: swi r17, r1, PT_R17 #endif - andi r5, r3, 0x1F; /* Extract ESR[EXC] */ + andi r5, r4, 0x1F; /* Extract ESR[EXC] */ #ifdef CONFIG_MMU /* Calculate exception vector offset = r5 << 2 */ addk r6, r5, r5; /* << 1 */ addk r6, r6, r6; /* << 2 */ +#ifdef DEBUG /* counting which exception happen */ lwi r5, r0, 0x200 + TOPHYS(r0_ram) addi r5, r5, 1 @@ -341,6 +342,7 @@ not_in_delay_slot: lwi r5, r6, 0x200 + TOPHYS(r0_ram) addi r5, r5, 1 swi r5, r6, 0x200 + TOPHYS(r0_ram) +#endif /* end */ /* Load the HW Exception vector */ lwi r6, r6, TOPHYS(_MB_HW_ExceptionVectorTable) @@ -376,7 +378,7 @@ handle_other_ex: /* Handle Other exceptions here */ swi r18, r1, PT_R18 or r5, r1, r0 - andi r6, r3, 0x1F; /* Load ESR[EC] */ + andi r6, r4, 0x1F; /* Load ESR[EC] */ lwi r7, r0, PER_CPU(KM) /* MS: saving current kernel mode to regs */ swi r7, r1, PT_MODE mfs r7, rfsr @@ -426,11 +428,11 @@ handle_other_ex: /* Handle Other exceptions here */ */ handle_unaligned_ex: /* Working registers already saved: R3, R4, R5, R6 - * R3 = ESR - * R4 = EAR + * R4 = ESR + * R3 = EAR */ #ifdef CONFIG_MMU - andi r6, r3, 0x1000 /* Check ESR[DS] */ + andi r6, r4, 0x1000 /* Check ESR[DS] */ beqi r6, _no_delayslot /* Branch if ESR[DS] not set */ mfs r17, rbtr; /* ESR[DS] set - return address in BTR */ nop @@ -439,7 +441,7 @@ _no_delayslot: RESTORE_STATE; bri unaligned_data_trap #endif - andi r6, r3, 0x3E0; /* Mask and extract the register operand */ + andi r6, r4, 0x3E0; /* Mask and extract the register operand */ srl r6, r6; /* r6 >> 5 */ srl r6, r6; srl r6, r6; @@ -448,33 +450,33 @@ _no_delayslot: /* Store the register operand in a temporary location */ sbi r6, r0, TOPHYS(ex_reg_op); - andi r6, r3, 0x400; /* Extract ESR[S] */ + andi r6, r4, 0x400; /* Extract ESR[S] */ bnei r6, ex_sw; ex_lw: - andi r6, r3, 0x800; /* Extract ESR[W] */ + andi r6, r4, 0x800; /* Extract ESR[W] */ beqi r6, ex_lhw; - lbui r5, r4, 0; /* Exception address in r4 */ + lbui r5, r3, 0; /* Exception address in r3 */ /* Load a word, byte-by-byte from destination address and save it in tmp space */ sbi r5, r0, TOPHYS(ex_tmp_data_loc_0); - lbui r5, r4, 1; + lbui r5, r3, 1; sbi r5, r0, TOPHYS(ex_tmp_data_loc_1); - lbui r5, r4, 2; + lbui r5, r3, 2; sbi r5, r0, TOPHYS(ex_tmp_data_loc_2); - lbui r5, r4, 3; + lbui r5, r3, 3; sbi r5, r0, TOPHYS(ex_tmp_data_loc_3); - /* Get the destination register value into r3 */ - lwi r3, r0, TOPHYS(ex_tmp_data_loc_0); + /* Get the destination register value into r4 */ + lwi r4, r0, TOPHYS(ex_tmp_data_loc_0); bri ex_lw_tail; ex_lhw: - lbui r5, r4, 0; /* Exception address in r4 */ + lbui r5, r3, 0; /* Exception address in r3 */ /* Load a half-word, byte-by-byte from destination address and save it in tmp space */ sbi r5, r0, TOPHYS(ex_tmp_data_loc_0); - lbui r5, r4, 1; + lbui r5, r3, 1; sbi r5, r0, TOPHYS(ex_tmp_data_loc_1); - /* Get the destination register value into r3 */ - lhui r3, r0, TOPHYS(ex_tmp_data_loc_0); + /* Get the destination register value into r4 */ + lhui r4, r0, TOPHYS(ex_tmp_data_loc_0); ex_lw_tail: /* Get the destination register number into r5 */ lbui r5, r0, TOPHYS(ex_reg_op); @@ -502,25 +504,25 @@ ex_sw_tail: andi r6, r6, 0x800; /* Extract ESR[W] */ beqi r6, ex_shw; /* Get the word - delay slot */ - swi r3, r0, TOPHYS(ex_tmp_data_loc_0); + swi r4, r0, TOPHYS(ex_tmp_data_loc_0); /* Store the word, byte-by-byte into destination address */ - lbui r3, r0, TOPHYS(ex_tmp_data_loc_0); - sbi r3, r4, 0; - lbui r3, r0, TOPHYS(ex_tmp_data_loc_1); - sbi r3, r4, 1; - lbui r3, r0, TOPHYS(ex_tmp_data_loc_2); - sbi r3, r4, 2; - lbui r3, r0, TOPHYS(ex_tmp_data_loc_3); - sbi r3, r4, 3; + lbui r4, r0, TOPHYS(ex_tmp_data_loc_0); + sbi r4, r3, 0; + lbui r4, r0, TOPHYS(ex_tmp_data_loc_1); + sbi r4, r3, 1; + lbui r4, r0, TOPHYS(ex_tmp_data_loc_2); + sbi r4, r3, 2; + lbui r4, r0, TOPHYS(ex_tmp_data_loc_3); + sbi r4, r3, 3; bri ex_handler_done; ex_shw: /* Store the lower half-word, byte-by-byte into destination address */ - swi r3, r0, TOPHYS(ex_tmp_data_loc_0); - lbui r3, r0, TOPHYS(ex_tmp_data_loc_2); - sbi r3, r4, 0; - lbui r3, r0, TOPHYS(ex_tmp_data_loc_3); - sbi r3, r4, 1; + swi r4, r0, TOPHYS(ex_tmp_data_loc_0); + lbui r4, r0, TOPHYS(ex_tmp_data_loc_2); + sbi r4, r3, 0; + lbui r4, r0, TOPHYS(ex_tmp_data_loc_3); + sbi r4, r3, 1; ex_sw_end: /* Exception handling of store word, ends. */ ex_handler_done: @@ -560,21 +562,16 @@ ex_handler_done: */ mfs r11, rpid nop - bri 4 - mfs r3, rear /* Get faulting address */ - nop /* If we are faulting a kernel address, we have to use the * kernel page tables. */ - ori r4, r0, CONFIG_KERNEL_START - cmpu r4, r3, r4 - bgti r4, ex3 + ori r5, r0, CONFIG_KERNEL_START + cmpu r5, r3, r5 + bgti r5, ex3 /* First, check if it was a zone fault (which means a user * tried to access a kernel or read-protected page - always * a SEGV). All other faults here must be stores, so no * need to check ESR_S as well. */ - mfs r4, resr - nop andi r4, r4, 0x800 /* ESR_Z - zone protection */ bnei r4, ex2 @@ -589,8 +586,6 @@ ex_handler_done: * tried to access a kernel or read-protected page - always * a SEGV). All other faults here must be stores, so no * need to check ESR_S as well. */ - mfs r4, resr - nop andi r4, r4, 0x800 /* ESR_Z */ bnei r4, ex2 /* get current task address */ @@ -665,8 +660,6 @@ ex_handler_done: * R3 = ESR */ - mfs r3, rear /* Get faulting address */ - nop RESTORE_STATE; bri page_fault_instr_trap @@ -677,18 +670,15 @@ ex_handler_done: */ handle_data_tlb_miss_exception: /* Working registers already saved: R3, R4, R5, R6 - * R3 = ESR + * R3 = EAR, R4 = ESR */ mfs r11, rpid nop - bri 4 - mfs r3, rear /* Get faulting address */ - nop /* If we are faulting a kernel address, we have to use the * kernel page tables. */ - ori r4, r0, CONFIG_KERNEL_START - cmpu r4, r3, r4 + ori r6, r0, CONFIG_KERNEL_START + cmpu r4, r3, r6 bgti r4, ex5 ori r4, r0, swapper_pg_dir mts rpid, r0 /* TLB will have 0 TID */ @@ -731,9 +721,8 @@ ex_handler_done: * Many of these bits are software only. Bits we don't set * here we (properly should) assume have the appropriate value. */ + brid finish_tlb_load andni r4, r4, 0x0ce2 /* Make sure 20, 21 are zero */ - - bri finish_tlb_load ex7: /* The bailout. Restore registers to pre-exception conditions * and call the heavyweights to help us out. @@ -754,9 +743,6 @@ ex_handler_done: */ mfs r11, rpid nop - bri 4 - mfs r3, rear /* Get faulting address */ - nop /* If we are faulting a kernel address, we have to use the * kernel page tables. @@ -792,7 +778,7 @@ ex_handler_done: lwi r4, r5, 0 /* Get Linux PTE */ andi r6, r4, _PAGE_PRESENT - beqi r6, ex7 + beqi r6, ex10 ori r4, r4, _PAGE_ACCESSED swi r4, r5, 0 @@ -805,9 +791,8 @@ ex_handler_done: * Many of these bits are software only. Bits we don't set * here we (properly should) assume have the appropriate value. */ + brid finish_tlb_load andni r4, r4, 0x0ce2 /* Make sure 20, 21 are zero */ - - bri finish_tlb_load ex10: /* The bailout. Restore registers to pre-exception conditions * and call the heavyweights to help us out. @@ -837,9 +822,9 @@ ex_handler_done: andi r5, r5, (MICROBLAZE_TLB_SIZE-1) ori r6, r0, 1 cmp r31, r5, r6 - blti r31, sem + blti r31, ex12 addik r5, r6, 1 - sem: + ex12: /* MS: save back current TLB index */ swi r5, r0, TOPHYS(tlb_index) @@ -859,7 +844,6 @@ ex_handler_done: nop /* Done...restore registers and get out of here. */ - ex12: mts rpid, r11 nop bri 4 diff --git a/arch/microblaze/kernel/misc.S b/arch/microblaze/kernel/misc.S index df16c6287a8..7cf86498326 100644 --- a/arch/microblaze/kernel/misc.S +++ b/arch/microblaze/kernel/misc.S @@ -26,9 +26,10 @@ * We avoid flushing the pinned 0, 1 and possibly 2 entries. */ .globl _tlbia; +.type _tlbia, @function .align 4; _tlbia: - addik r12, r0, 63 /* flush all entries (63 - 3) */ + addik r12, r0, MICROBLAZE_TLB_SIZE - 1 /* flush all entries (63 - 3) */ /* isync */ _tlbia_1: mts rtlbx, r12 @@ -41,11 +42,13 @@ _tlbia_1: /* sync */ rtsd r15, 8 nop + .size _tlbia, . - _tlbia /* * Flush MMU TLB for a particular address (in r5) */ .globl _tlbie; +.type _tlbie, @function .align 4; _tlbie: mts rtlbsx, r5 /* look up the address in TLB */ @@ -59,17 +62,20 @@ _tlbie_1: rtsd r15, 8 nop + .size _tlbie, . - _tlbie + /* * Allocate TLB entry for early console */ .globl early_console_reg_tlb_alloc; +.type early_console_reg_tlb_alloc, @function .align 4; early_console_reg_tlb_alloc: /* * Load a TLB entry for the UART, so that microblaze_progress() can use * the UARTs nice and early. We use a 4k real==virtual mapping. */ - ori r4, r0, 63 + ori r4, r0, MICROBLAZE_TLB_SIZE - 1 mts rtlbx, r4 /* TLB slot 2 */ or r4,r5,r0 @@ -86,6 +92,8 @@ early_console_reg_tlb_alloc: rtsd r15, 8 nop + .size early_console_reg_tlb_alloc, . - early_console_reg_tlb_alloc + /* * Copy a whole page (4096 bytes). */ @@ -104,6 +112,7 @@ early_console_reg_tlb_alloc: #define DCACHE_LINE_BYTES (4 * 4) .globl copy_page; +.type copy_page, @function .align 4; copy_page: ori r11, r0, (PAGE_SIZE/DCACHE_LINE_BYTES) - 1 @@ -118,3 +127,5 @@ _copy_page_loop: addik r11, r11, -1 rtsd r15, 8 nop + + .size copy_page, . - copy_page diff --git a/arch/microblaze/kernel/process.c b/arch/microblaze/kernel/process.c index 812f1bf06c9..09bed44dfcd 100644 --- a/arch/microblaze/kernel/process.c +++ b/arch/microblaze/kernel/process.c @@ -15,6 +15,7 @@ #include <linux/bitops.h> #include <asm/system.h> #include <asm/pgalloc.h> +#include <asm/uaccess.h> /* for USER_DS macros */ #include <asm/cacheflush.h> void show_regs(struct pt_regs *regs) @@ -74,7 +75,10 @@ __setup("hlt", hlt_setup); void default_idle(void) { - if (!hlt_counter) { + if (likely(hlt_counter)) { + while (!need_resched()) + cpu_relax(); + } else { clear_thread_flag(TIF_POLLING_NRFLAG); smp_mb__after_clear_bit(); local_irq_disable(); @@ -82,9 +86,7 @@ void default_idle(void) cpu_sleep(); local_irq_enable(); set_thread_flag(TIF_POLLING_NRFLAG); - } else - while (!need_resched()) - cpu_relax(); + } } void cpu_idle(void) diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c index f974ec7aa35..17c98dbcec8 100644 --- a/arch/microblaze/kernel/setup.c +++ b/arch/microblaze/kernel/setup.c @@ -92,6 +92,12 @@ inline unsigned get_romfs_len(unsigned *addr) } #endif /* CONFIG_MTD_UCLINUX_EBSS */ +#if defined(CONFIG_EARLY_PRINTK) && defined(CONFIG_SERIAL_UARTLITE_CONSOLE) +#define eprintk early_printk +#else +#define eprintk printk +#endif + void __init machine_early_init(const char *cmdline, unsigned int ram, unsigned int fdt, unsigned int msr) { @@ -139,32 +145,32 @@ void __init machine_early_init(const char *cmdline, unsigned int ram, setup_early_printk(NULL); #endif - early_printk("Ramdisk addr 0x%08x, ", ram); + eprintk("Ramdisk addr 0x%08x, ", ram); if (fdt) - early_printk("FDT at 0x%08x\n", fdt); + eprintk("FDT at 0x%08x\n", fdt); else - early_printk("Compiled-in FDT at 0x%08x\n", + eprintk("Compiled-in FDT at 0x%08x\n", (unsigned int)_fdt_start); #ifdef CONFIG_MTD_UCLINUX - early_printk("Found romfs @ 0x%08x (0x%08x)\n", + eprintk("Found romfs @ 0x%08x (0x%08x)\n", romfs_base, romfs_size); - early_printk("#### klimit %p ####\n", old_klimit); + eprintk("#### klimit %p ####\n", old_klimit); BUG_ON(romfs_size < 0); /* What else can we do? */ - early_printk("Moved 0x%08x bytes from 0x%08x to 0x%08x\n", + eprintk("Moved 0x%08x bytes from 0x%08x to 0x%08x\n", romfs_size, romfs_base, (unsigned)&_ebss); - early_printk("New klimit: 0x%08x\n", (unsigned)klimit); + eprintk("New klimit: 0x%08x\n", (unsigned)klimit); #endif #if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR if (msr) - early_printk("!!!Your kernel has setup MSR instruction but " + eprintk("!!!Your kernel has setup MSR instruction but " "CPU don't have it %d\n", msr); #else if (!msr) - early_printk("!!!Your kernel not setup MSR instruction but " + eprintk("!!!Your kernel not setup MSR instruction but " "CPU have it %d\n", msr); #endif diff --git a/arch/microblaze/kernel/traps.c b/arch/microblaze/kernel/traps.c index eaaaf805f31..5e4570ef515 100644 --- a/arch/microblaze/kernel/traps.c +++ b/arch/microblaze/kernel/traps.c @@ -22,13 +22,11 @@ void trap_init(void) __enable_hw_exceptions(); } -static int kstack_depth_to_print = 24; +static unsigned long kstack_depth_to_print = 24; static int __init kstack_setup(char *s) { - kstack_depth_to_print = strict_strtoul(s, 0, NULL); - - return 1; + return !strict_strtoul(s, 0, &kstack_depth_to_print); } __setup("kstack=", kstack_setup); diff --git a/arch/microblaze/lib/Makefile b/arch/microblaze/lib/Makefile index b579db068c0..4dfe47d3cd9 100644 --- a/arch/microblaze/lib/Makefile +++ b/arch/microblaze/lib/Makefile @@ -10,5 +10,4 @@ else lib-y += memcpy.o memmove.o endif -lib-$(CONFIG_NO_MMU) += uaccess.o -lib-$(CONFIG_MMU) += uaccess_old.o +lib-y += uaccess_old.o diff --git a/arch/microblaze/lib/fastcopy.S b/arch/microblaze/lib/fastcopy.S index 02e3ab4eddf..fdc48bb065d 100644 --- a/arch/microblaze/lib/fastcopy.S +++ b/arch/microblaze/lib/fastcopy.S @@ -30,8 +30,9 @@ */ #include <linux/linkage.h> - + .text .globl memcpy + .type memcpy, @function .ent memcpy memcpy: @@ -345,9 +346,11 @@ a_done: rtsd r15, 8 nop +.size memcpy, . - memcpy .end memcpy /*----------------------------------------------------------------------------*/ .globl memmove + .type memmove, @function .ent memmove memmove: @@ -659,4 +662,5 @@ d_done: rtsd r15, 8 nop +.size memmove, . - memmove .end memmove diff --git a/arch/microblaze/lib/memcpy.c b/arch/microblaze/lib/memcpy.c index cc2108b6b26..014bac92bdf 100644 --- a/arch/microblaze/lib/memcpy.c +++ b/arch/microblaze/lib/memcpy.c @@ -53,7 +53,7 @@ void *memcpy(void *v_dst, const void *v_src, __kernel_size_t c) const uint32_t *i_src; uint32_t *i_dst; - if (c >= 4) { + if (likely(c >= 4)) { unsigned value, buf_hold; /* Align the dstination to a word boundry. */ diff --git a/arch/microblaze/lib/memset.c b/arch/microblaze/lib/memset.c index 4df851d41a2..ecfb663e1fc 100644 --- a/arch/microblaze/lib/memset.c +++ b/arch/microblaze/lib/memset.c @@ -33,22 +33,23 @@ #ifdef __HAVE_ARCH_MEMSET void *memset(void *v_src, int c, __kernel_size_t n) { - char *src = v_src; #ifdef CONFIG_OPT_LIB_FUNCTION uint32_t *i_src; - uint32_t w32; + uint32_t w32 = 0; #endif /* Truncate c to 8 bits */ c = (c & 0xFF); #ifdef CONFIG_OPT_LIB_FUNCTION - /* Make a repeating word out of it */ - w32 = c; - w32 |= w32 << 8; - w32 |= w32 << 16; + if (unlikely(c)) { + /* Make a repeating word out of it */ + w32 = c; + w32 |= w32 << 8; + w32 |= w32 << 16; + } - if (n >= 4) { + if (likely(n >= 4)) { /* Align the destination to a word boundary */ /* This is done in an endian independant manner */ switch ((unsigned) src & 3) { diff --git a/arch/microblaze/lib/uaccess.c b/arch/microblaze/lib/uaccess.c deleted file mode 100644 index a853fe089c4..00000000000 --- a/arch/microblaze/lib/uaccess.c +++ /dev/null @@ -1,48 +0,0 @@ -/* - * Copyright (C) 2006 Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#include <linux/string.h> -#include <asm/uaccess.h> - -#include <asm/bug.h> - -long strnlen_user(const char __user *src, long count) -{ - return strlen(src) + 1; -} - -#define __do_strncpy_from_user(dst, src, count, res) \ - do { \ - char *tmp; \ - strncpy(dst, src, count); \ - for (tmp = dst; *tmp && count > 0; tmp++, count--) \ - ; \ - res = (tmp - dst); \ - } while (0) - -long __strncpy_from_user(char *dst, const char __user *src, long count) -{ - long res; - __do_strncpy_from_user(dst, src, count, res); - return res; -} - -long strncpy_from_user(char *dst, const char __user *src, long count) -{ - long res = -EFAULT; - if (access_ok(VERIFY_READ, src, 1)) - __do_strncpy_from_user(dst, src, count, res); - return res; -} - -unsigned long __copy_tofrom_user(void __user *to, - const void __user *from, unsigned long size) -{ - memcpy(to, from, size); - return 0; -} diff --git a/arch/microblaze/lib/uaccess_old.S b/arch/microblaze/lib/uaccess_old.S index 67f991c14b8..5810cec54a7 100644 --- a/arch/microblaze/lib/uaccess_old.S +++ b/arch/microblaze/lib/uaccess_old.S @@ -22,6 +22,7 @@ .text .globl __strncpy_user; +.type __strncpy_user, @function .align 4; __strncpy_user: @@ -50,7 +51,7 @@ __strncpy_user: 3: rtsd r15,8 nop - + .size __strncpy_user, . - __strncpy_user .section .fixup, "ax" .align 2 @@ -72,6 +73,7 @@ __strncpy_user: .text .globl __strnlen_user; +.type __strnlen_user, @function .align 4; __strnlen_user: addik r3,r6,0 @@ -90,7 +92,7 @@ __strnlen_user: 3: rtsd r15,8 nop - + .size __strnlen_user, . - __strnlen_user .section .fixup,"ax" 4: @@ -108,6 +110,7 @@ __strnlen_user: */ .text .globl __copy_tofrom_user; +.type __copy_tofrom_user, @function .align 4; __copy_tofrom_user: /* @@ -116,20 +119,34 @@ __copy_tofrom_user: * r7, r3 - count * r4 - tempval */ - addik r3,r7,0 - beqi r3,3f -1: - lbu r4,r6,r0 - addik r6,r6,1 -2: - sb r4,r5,r0 - addik r3,r3,-1 - bneid r3,1b - addik r5,r5,1 /* delay slot */ + beqid r7, 3f /* zero size is not likely */ + andi r3, r7, 0x3 /* filter add count */ + bneid r3, 4f /* if is odd value then byte copying */ + or r3, r5, r6 /* find if is any to/from unaligned */ + andi r3, r3, 0x3 /* mask unaligned */ + bneid r3, 1f /* it is unaligned -> then jump */ + or r3, r0, r0 + +/* at least one 4 byte copy */ +5: lw r4, r6, r3 +6: sw r4, r5, r3 + addik r7, r7, -4 + bneid r7, 5b + addik r3, r3, 4 + addik r3, r7, 0 + rtsd r15, 8 + nop +4: or r3, r0, r0 +1: lbu r4,r6,r3 +2: sb r4,r5,r3 + addik r7,r7,-1 + bneid r7,1b + addik r3,r3,1 /* delay slot */ 3: + addik r3,r7,0 rtsd r15,8 nop - + .size __copy_tofrom_user, . - __copy_tofrom_user .section __ex_table,"a" - .word 1b,3b,2b,3b + .word 1b,3b,2b,3b,5b,3b,6b,3b diff --git a/arch/microblaze/mm/fault.c b/arch/microblaze/mm/fault.c index d9d249a66ff..7af87f4b2c2 100644 --- a/arch/microblaze/mm/fault.c +++ b/arch/microblaze/mm/fault.c @@ -106,7 +106,7 @@ void do_page_fault(struct pt_regs *regs, unsigned long address, regs->esr = error_code; /* On a kernel SLB miss we can only check for a valid exception entry */ - if (kernel_mode(regs) && (address >= TASK_SIZE)) { + if (unlikely(kernel_mode(regs) && (address >= TASK_SIZE))) { printk(KERN_WARNING "kernel task_size exceed"); _exception(SIGSEGV, regs, code, address); } @@ -122,7 +122,7 @@ void do_page_fault(struct pt_regs *regs, unsigned long address, } #endif /* CONFIG_KGDB */ - if (in_atomic() || !mm) { + if (unlikely(in_atomic() || !mm)) { if (kernel_mode(regs)) goto bad_area_nosemaphore; @@ -150,7 +150,7 @@ void do_page_fault(struct pt_regs *regs, unsigned long address, * source. If this is invalid we can skip the address space check, * thus avoiding the deadlock. */ - if (!down_read_trylock(&mm->mmap_sem)) { + if (unlikely(!down_read_trylock(&mm->mmap_sem))) { if (kernel_mode(regs) && !search_exception_tables(regs->pc)) goto bad_area_nosemaphore; @@ -158,16 +158,16 @@ void do_page_fault(struct pt_regs *regs, unsigned long address, } vma = find_vma(mm, address); - if (!vma) + if (unlikely(!vma)) goto bad_area; if (vma->vm_start <= address) goto good_area; - if (!(vma->vm_flags & VM_GROWSDOWN)) + if (unlikely(!(vma->vm_flags & VM_GROWSDOWN))) goto bad_area; - if (!is_write) + if (unlikely(!is_write)) goto bad_area; /* @@ -179,7 +179,7 @@ void do_page_fault(struct pt_regs *regs, unsigned long address, * before setting the user r1. Thus we allow the stack to * expand to 1MB without further checks. */ - if (address + 0x100000 < vma->vm_end) { + if (unlikely(address + 0x100000 < vma->vm_end)) { /* get user regs even if this fault is in kernel mode */ struct pt_regs *uregs = current->thread.regs; @@ -209,15 +209,15 @@ good_area: code = SEGV_ACCERR; /* a write */ - if (is_write) { - if (!(vma->vm_flags & VM_WRITE)) + if (unlikely(is_write)) { + if (unlikely(!(vma->vm_flags & VM_WRITE))) goto bad_area; /* a read */ } else { /* protection fault */ - if (error_code & 0x08000000) + if (unlikely(error_code & 0x08000000)) goto bad_area; - if (!(vma->vm_flags & (VM_READ | VM_EXEC))) + if (unlikely(!(vma->vm_flags & (VM_READ | VM_EXEC)))) goto bad_area; } @@ -235,7 +235,7 @@ survive: goto do_sigbus; BUG(); } - if (fault & VM_FAULT_MAJOR) + if (unlikely(fault & VM_FAULT_MAJOR)) current->maj_flt++; else current->min_flt++; diff --git a/arch/microblaze/mm/init.c b/arch/microblaze/mm/init.c index 1608e2e1a44..40bc10ede09 100644 --- a/arch/microblaze/mm/init.c +++ b/arch/microblaze/mm/init.c @@ -165,7 +165,6 @@ void free_init_pages(char *what, unsigned long begin, unsigned long end) for (addr = begin; addr < end; addr += PAGE_SIZE) { ClearPageReserved(virt_to_page(addr)); init_page_count(virt_to_page(addr)); - memset((void *)addr, 0xcc, PAGE_SIZE); free_page(addr); totalram_pages++; } @@ -208,14 +207,6 @@ void __init mem_init(void) } #ifndef CONFIG_MMU -/* Check against bounds of physical memory */ -int ___range_ok(unsigned long addr, unsigned long size) -{ - return ((addr < memory_start) || - ((addr + size) > memory_end)); -} -EXPORT_SYMBOL(___range_ok); - int page_is_ram(unsigned long pfn) { return __range_ok(pfn, 0); diff --git a/arch/microblaze/mm/pgtable.c b/arch/microblaze/mm/pgtable.c index 63a6fd07c48..d31312cde6e 100644 --- a/arch/microblaze/mm/pgtable.c +++ b/arch/microblaze/mm/pgtable.c @@ -154,7 +154,7 @@ int map_page(unsigned long va, phys_addr_t pa, int flags) err = 0; set_pte_at(&init_mm, va, pg, pfn_pte(pa >> PAGE_SHIFT, __pgprot(flags))); - if (mem_init_done) + if (unlikely(mem_init_done)) flush_HPTE(0, va, pmd_val(*pd)); /* flush_HPTE(0, va, pg); */ } diff --git a/arch/powerpc/include/asm/asm-compat.h b/arch/powerpc/include/asm/asm-compat.h index c1b475a941e..a9b91ed3d4b 100644 --- a/arch/powerpc/include/asm/asm-compat.h +++ b/arch/powerpc/include/asm/asm-compat.h @@ -28,6 +28,7 @@ #define PPC_LLARX(t, a, b, eh) PPC_LDARX(t, a, b, eh) #define PPC_STLCX stringify_in_c(stdcx.) #define PPC_CNTLZL stringify_in_c(cntlzd) +#define PPC_LR_STKOFF 16 /* Move to CR, single-entry optimized version. Only available * on POWER4 and later. @@ -51,6 +52,7 @@ #define PPC_STLCX stringify_in_c(stwcx.) #define PPC_CNTLZL stringify_in_c(cntlzw) #define PPC_MTOCRF stringify_in_c(mtcrf) +#define PPC_LR_STKOFF 4 #endif diff --git a/arch/powerpc/kernel/misc.S b/arch/powerpc/kernel/misc.S index 2d29752cbe1..b485a87c94e 100644 --- a/arch/powerpc/kernel/misc.S +++ b/arch/powerpc/kernel/misc.S @@ -127,3 +127,31 @@ _GLOBAL(__setup_cpu_power7) _GLOBAL(__restore_cpu_power7) /* place holder */ blr + +#ifdef CONFIG_EVENT_TRACING +/* + * Get a minimal set of registers for our caller's nth caller. + * r3 = regs pointer, r5 = n. + * + * We only get R1 (stack pointer), NIP (next instruction pointer) + * and LR (link register). These are all we can get in the + * general case without doing complicated stack unwinding, but + * fortunately they are enough to do a stack backtrace, which + * is all we need them for. + */ +_GLOBAL(perf_arch_fetch_caller_regs) + mr r6,r1 + cmpwi r5,0 + mflr r4 + ble 2f + mtctr r5 +1: PPC_LL r6,0(r6) + bdnz 1b + PPC_LL r4,PPC_LR_STKOFF(r6) +2: PPC_LL r7,0(r6) + PPC_LL r7,PPC_LR_STKOFF(r7) + PPC_STL r6,GPR1-STACK_FRAME_OVERHEAD(r3) + PPC_STL r4,_NIP-STACK_FRAME_OVERHEAD(r3) + PPC_STL r7,_LINK-STACK_FRAME_OVERHEAD(r3) + blr +#endif /* CONFIG_EVENT_TRACING */ diff --git a/arch/s390/boot/compressed/misc.c b/arch/s390/boot/compressed/misc.c index a97d6952582..14e0479d388 100644 --- a/arch/s390/boot/compressed/misc.c +++ b/arch/s390/boot/compressed/misc.c @@ -24,8 +24,8 @@ /* Symbols defined by linker scripts */ extern char input_data[]; extern int input_len; -extern int _text; -extern int _end; +extern char _text, _end; +extern char _bss, _ebss; static void error(char *m); @@ -129,12 +129,12 @@ unsigned long decompress_kernel(void) unsigned long output_addr; unsigned char *output; + check_ipl_parmblock((void *) 0, (unsigned long) output + SZ__bss_start); + memset(&_bss, 0, &_ebss - &_bss); free_mem_ptr = (unsigned long)&_end; free_mem_end_ptr = free_mem_ptr + HEAP_SIZE; output = (unsigned char *) ((free_mem_end_ptr + 4095UL) & -4096UL); - check_ipl_parmblock((void *) 0, (unsigned long) output + SZ__bss_start); - #ifdef CONFIG_BLK_DEV_INITRD /* * Move the initrd right behind the end of the decompressed diff --git a/arch/s390/include/asm/system.h b/arch/s390/include/asm/system.h index 67ee6c3c6bb..1741c1556a4 100644 --- a/arch/s390/include/asm/system.h +++ b/arch/s390/include/asm/system.h @@ -110,6 +110,7 @@ extern void pfault_fini(void); #endif /* CONFIG_PFAULT */ extern void cmma_init(void); +extern int memcpy_real(void *, void *, size_t); #define finish_arch_switch(prev) do { \ set_fs(current->thread.mm_segment); \ @@ -218,8 +219,8 @@ __cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, int size) " l %0,%2\n" "0: nr %0,%5\n" " lr %1,%0\n" - " or %0,%2\n" - " or %1,%3\n" + " or %0,%3\n" + " or %1,%4\n" " cs %0,%1,%2\n" " jnl 1f\n" " xr %1,%0\n" @@ -239,8 +240,8 @@ __cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, int size) " l %0,%2\n" "0: nr %0,%5\n" " lr %1,%0\n" - " or %0,%2\n" - " or %1,%3\n" + " or %0,%3\n" + " or %1,%4\n" " cs %0,%1,%2\n" " jnl 1f\n" " xr %1,%0\n" diff --git a/arch/s390/kernel/head.S b/arch/s390/kernel/head.S index ca4a62bd862..9d1f76702d4 100644 --- a/arch/s390/kernel/head.S +++ b/arch/s390/kernel/head.S @@ -517,7 +517,10 @@ startup: lhi %r1,2 # mode 2 = esame (dump) sigp %r1,%r0,0x12 # switch to esame mode sam64 # switch to 64 bit mode + larl %r13,4f + lmh %r0,%r15,0(%r13) # clear high-order half jg startup_continue +4: .fill 16,4,0x0 #else mvi __LC_AR_MODE_ID,0 # set ESA flag (mode 0) l %r13,4f-.LPG0(%r13) diff --git a/arch/s390/kernel/head64.S b/arch/s390/kernel/head64.S index 39580e76865..1f70970de0a 100644 --- a/arch/s390/kernel/head64.S +++ b/arch/s390/kernel/head64.S @@ -21,7 +21,6 @@ startup_continue: larl %r1,sched_clock_base_cc mvc 0(8,%r1),__LC_LAST_UPDATE_CLOCK larl %r13,.LPG1 # get base - lmh %r0,%r15,.Lzero64-.LPG1(%r13) # clear high-order half lctlg %c0,%c15,.Lctl-.LPG1(%r13) # load control registers lg %r12,.Lparmaddr-.LPG1(%r13) # pointer to parameter area # move IPL device to lowcore @@ -67,7 +66,6 @@ startup_continue: .L4malign:.quad 0xffffffffffc00000 .Lscan2g:.quad 0x80000000 + 0x20000 - 8 # 2GB + 128K - 8 .Lnop: .long 0x07000700 -.Lzero64:.fill 16,4,0x0 .Lparmaddr: .quad PARMAREA .align 64 diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index 77a63ae419f..ba363d99de4 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -401,7 +401,7 @@ setup_lowcore(void) * Setup lowcore for boot cpu */ BUILD_BUG_ON(sizeof(struct _lowcore) != LC_PAGES * 4096); - lc = __alloc_bootmem(LC_PAGES * PAGE_SIZE, LC_PAGES * PAGE_SIZE, 0); + lc = __alloc_bootmem_low(LC_PAGES * PAGE_SIZE, LC_PAGES * PAGE_SIZE, 0); lc->restart_psw.mask = PSW_BASE_BITS | PSW_DEFAULT_KEY; lc->restart_psw.addr = PSW_ADDR_AMODE | (unsigned long) restart_int_handler; @@ -433,7 +433,7 @@ setup_lowcore(void) #ifndef CONFIG_64BIT if (MACHINE_HAS_IEEE) { lc->extended_save_area_addr = (__u32) - __alloc_bootmem(PAGE_SIZE, PAGE_SIZE, 0); + __alloc_bootmem_low(PAGE_SIZE, PAGE_SIZE, 0); /* enable extended save area */ __ctl_set_bit(14, 29); } diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index 29f65bce55e..d7d24fc3d6b 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -292,9 +292,9 @@ static void __init smp_get_save_area(unsigned int cpu, unsigned int phy_cpu) zfcpdump_save_areas[cpu] = kmalloc(sizeof(struct save_area), GFP_KERNEL); while (raw_sigp(phy_cpu, sigp_stop_and_store_status) == sigp_busy) cpu_relax(); - memcpy(zfcpdump_save_areas[cpu], - (void *)(unsigned long) store_prefix() + SAVE_AREA_BASE, - sizeof(struct save_area)); + memcpy_real(zfcpdump_save_areas[cpu], + (void *)(unsigned long) store_prefix() + SAVE_AREA_BASE, + sizeof(struct save_area)); } struct save_area *zfcpdump_save_areas[NR_CPUS + 1]; diff --git a/arch/s390/mm/maccess.c b/arch/s390/mm/maccess.c index 81756271dc4..a8c2af8c650 100644 --- a/arch/s390/mm/maccess.c +++ b/arch/s390/mm/maccess.c @@ -59,3 +59,29 @@ long probe_kernel_write(void *dst, void *src, size_t size) } return copied < 0 ? -EFAULT : 0; } + +int memcpy_real(void *dest, void *src, size_t count) +{ + register unsigned long _dest asm("2") = (unsigned long) dest; + register unsigned long _len1 asm("3") = (unsigned long) count; + register unsigned long _src asm("4") = (unsigned long) src; + register unsigned long _len2 asm("5") = (unsigned long) count; + unsigned long flags; + int rc = -EFAULT; + + if (!count) + return 0; + flags = __raw_local_irq_stnsm(0xf8UL); + asm volatile ( + "0: mvcle %1,%2,0x0\n" + "1: jo 0b\n" + " lhi %0,0x0\n" + "2:\n" + EX_TABLE(1b,2b) + : "+d" (rc), "+d" (_dest), "+d" (_src), "+d" (_len1), + "+d" (_len2), "=m" (*((long *) dest)) + : "m" (*((long *) src)) + : "cc", "memory"); + __raw_local_irq_ssm(flags); + return rc; +} diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c index 39ed8722d11..6c13b92742e 100644 --- a/arch/sh/boards/mach-ecovec24/setup.c +++ b/arch/sh/boards/mach-ecovec24/setup.c @@ -836,6 +836,8 @@ static void __init sh_eth_init(struct sh_eth_plat_data *pd) pd->mac_addr[i] = mac_read(a, 0x10 + i); msleep(10); } + + i2c_put_adapter(a); } #else static void __init sh_eth_init(struct sh_eth_plat_data *pd) diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c index 66cdbc3c7af..ccaa290e9ab 100644 --- a/arch/sh/boards/mach-se/7724/setup.c +++ b/arch/sh/boards/mach-se/7724/setup.c @@ -52,6 +52,13 @@ * and change SW41 to use 720p */ +/* + * about sound + * + * This setup.c supports FSI slave mode. + * Please change J20, J21, J22 pin to 1-2 connection. + */ + /* Heartbeat */ static struct resource heartbeat_resource = { .start = PA_LED, @@ -276,6 +283,7 @@ static struct clk fsimcka_clk = { .rate = 0, /* unknown */ }; +/* change J20, J21, J22 pin to 1-2 connection to use slave mode */ struct sh_fsi_platform_info fsi_info = { .porta_flags = SH_FSI_BRS_INV | SH_FSI_OUT_SLAVE_MODE | diff --git a/arch/sh/configs/ecovec24_defconfig b/arch/sh/configs/ecovec24_defconfig index 18e3356406f..6041c66dd10 100644 --- a/arch/sh/configs/ecovec24_defconfig +++ b/arch/sh/configs/ecovec24_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc2 -# Mon Jan 4 11:20:36 2010 +# Linux kernel version: 2.6.34-rc2 +# Mon Mar 29 02:21:58 2010 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -13,8 +13,8 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y -CONFIG_GENERIC_IRQ_PROBE=y CONFIG_IRQ_PER_CPU=y +CONFIG_SPARSE_IRQ=y CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y @@ -32,6 +32,7 @@ CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_DMA_NONCOHERENT=y +CONFIG_NEED_DMA_MAP_STATE=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -47,9 +48,11 @@ CONFIG_LOCALVERSION="" CONFIG_HAVE_KERNEL_GZIP=y CONFIG_HAVE_KERNEL_BZIP2=y CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_HAVE_KERNEL_LZO=y CONFIG_KERNEL_GZIP=y # CONFIG_KERNEL_BZIP2 is not set # CONFIG_KERNEL_LZMA is not set +# CONFIG_KERNEL_LZO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y @@ -71,14 +74,8 @@ CONFIG_RCU_FANOUT=32 # CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set @@ -107,7 +104,7 @@ CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters # -# CONFIG_PERF_EVENTS is not set +CONFIG_PERF_EVENTS=y # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_COMPAT_BRK=y @@ -116,13 +113,13 @@ CONFIG_SLAB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set CONFIG_HAVE_OPROFILE=y -CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y CONFIG_HAVE_DMA_API_DEBUG=y +CONFIG_HAVE_HW_BREAKPOINT=y # # GCOV-based kernel profiling @@ -234,12 +231,12 @@ CONFIG_CPU_SUBTYPE_SH7724=y CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 -CONFIG_FORCE_MAX_ZONEORDER=11 +CONFIG_FORCE_MAX_ZONEORDER=12 CONFIG_MEMORY_START=0x08000000 CONFIG_MEMORY_SIZE=0x10000000 CONFIG_29BIT=y -# CONFIG_PMB_ENABLE is not set -# CONFIG_X2TLB is not set +# CONFIG_PMB is not set +CONFIG_X2TLB=y CONFIG_VSYSCALL=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y @@ -247,6 +244,8 @@ CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_MAX_ACTIVE_REGIONS=1 CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_IOREMAP_FIXED=y +CONFIG_UNCACHED_MAPPING=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set @@ -262,7 +261,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 -CONFIG_NR_QUICK=2 +CONFIG_NR_QUICK=1 # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 @@ -337,7 +336,6 @@ CONFIG_SECCOMP=y # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y CONFIG_GUSA=y -# CONFIG_SPARSE_IRQ is not set # # Boot options @@ -347,7 +345,7 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000 CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_CMDLINE_OVERWRITE=y # CONFIG_CMDLINE_EXTEND is not set -CONFIG_CMDLINE="console=tty0, console=ttySC0,115200 root=/dev/nfs ip=dhcp mem=120M memchunk.vpu=4m" +CONFIG_CMDLINE="console=tty0, console=ttySC0,115200 root=/dev/nfs ip=dhcp mem=248M memchunk.vpu=8m memchunk.veu0=4m" # # Bus options @@ -373,6 +371,7 @@ CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y # CONFIG_HIBERNATION is not set CONFIG_PM_RUNTIME=y +CONFIG_PM_OPS=y # CONFIG_CPU_IDLE is not set CONFIG_NET=y @@ -380,7 +379,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -445,7 +443,45 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set -# CONFIG_IRDA is not set +CONFIG_IRDA=y + +# +# IrDA protocols +# +# CONFIG_IRLAN is not set +# CONFIG_IRCOMM is not set +# CONFIG_IRDA_ULTRA is not set + +# +# IrDA options +# +# CONFIG_IRDA_CACHE_LAST_LSAP is not set +# CONFIG_IRDA_FAST_RR is not set +# CONFIG_IRDA_DEBUG is not set + +# +# Infrared-port device drivers +# + +# +# SIR device drivers +# +# CONFIG_IRTTY_SIR is not set + +# +# Dongle support +# +CONFIG_SH_SIR=y +# CONFIG_KINGSUN_DONGLE is not set +# CONFIG_KSDAZZLE_DONGLE is not set +# CONFIG_KS959_DONGLE is not set + +# +# FIR device drivers +# +# CONFIG_USB_IRDA is not set +# CONFIG_SIGMATEL_FIR is not set +# CONFIG_MCS_FIR is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y @@ -556,6 +592,7 @@ CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_NANDSIM is not set # CONFIG_MTD_NAND_PLATFORM is not set # CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_NAND_SH_FLCTL is not set # CONFIG_MTD_ONENAND is not set # @@ -597,6 +634,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_ISL29003 is not set +# CONFIG_SENSORS_TSL2550 is not set # CONFIG_DS1682 is not set # CONFIG_TI_DAC7512 is not set # CONFIG_C2PORT is not set @@ -616,6 +654,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_DMA=y @@ -768,7 +807,29 @@ CONFIG_KEYBOARD_SH_KEYSC=y # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set -# CONFIG_INPUT_TOUCHSCREEN is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_ADS7846 is not set +# CONFIG_TOUCHSCREEN_AD7877 is not set +# CONFIG_TOUCHSCREEN_AD7879_I2C is not set +# CONFIG_TOUCHSCREEN_AD7879_SPI is not set +# CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_DYNAPRO is not set +# CONFIG_TOUCHSCREEN_EETI is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MCS5000 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +CONFIG_TOUCHSCREEN_TSC2007=y +# CONFIG_TOUCHSCREEN_W90X900 is not set # CONFIG_INPUT_MISC is not set # @@ -802,10 +863,10 @@ CONFIG_SERIAL_SH_SCI_NR_UARTS=6 CONFIG_SERIAL_SH_SCI_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_TIMBERDALE is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_HW_RANDOM_TIMERIOMEM is not set @@ -830,6 +891,7 @@ CONFIG_I2C_HELPER_AUTO=y # CONFIG_I2C_OCORES is not set CONFIG_I2C_SH_MOBILE=y # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers @@ -843,15 +905,9 @@ CONFIG_I2C_SH_MOBILE=y # # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set CONFIG_SPI=y CONFIG_SPI_MASTER=y @@ -882,13 +938,16 @@ CONFIG_GPIOLIB=y # # Memory mapped GPIO expanders: # +# CONFIG_GPIO_IT8761E is not set # # I2C GPIO expanders: # +# CONFIG_GPIO_MAX7300 is not set # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set +# CONFIG_GPIO_ADP5588 is not set # # PCI GPIO expanders: @@ -919,23 +978,26 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # -# CONFIG_MFD_CORE is not set +CONFIG_MFD_CORE=y +# CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set -# CONFIG_MFD_SH_MOBILE_SDHI is not set +CONFIG_MFD_SH_MOBILE_SDHI=y # CONFIG_HTC_PASIC3 is not set +# CONFIG_HTC_I2CPLD is not set # CONFIG_TPS65010 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_MFD_MC13783 is not set # CONFIG_AB3100_CORE is not set # CONFIG_EZX_PCAP is not set -# CONFIG_MFD_88PM8607 is not set # CONFIG_AB4500_CORE is not set # CONFIG_REGULATOR is not set CONFIG_MEDIA_SUPPORT=y @@ -985,10 +1047,10 @@ CONFIG_SOC_CAMERA=y # CONFIG_SOC_CAMERA_MT9M001 is not set # CONFIG_SOC_CAMERA_MT9M111 is not set # CONFIG_SOC_CAMERA_MT9T031 is not set -# CONFIG_SOC_CAMERA_MT9T112 is not set +CONFIG_SOC_CAMERA_MT9T112=y # CONFIG_SOC_CAMERA_MT9V022 is not set # CONFIG_SOC_CAMERA_RJ54N1 is not set -# CONFIG_SOC_CAMERA_TW9910 is not set +CONFIG_SOC_CAMERA_TW9910=y # CONFIG_SOC_CAMERA_PLATFORM is not set # CONFIG_SOC_CAMERA_OV772X is not set # CONFIG_SOC_CAMERA_OV9640 is not set @@ -1001,6 +1063,7 @@ CONFIG_RADIO_ADAPTERS=y # CONFIG_RADIO_SI470X is not set # CONFIG_USB_MR800 is not set # CONFIG_RADIO_TEA5764 is not set +# CONFIG_RADIO_SAA7706H is not set # CONFIG_RADIO_TEF6862 is not set # CONFIG_DAB is not set @@ -1034,6 +1097,7 @@ CONFIG_FB_DEFERRED_IO=y # # CONFIG_FB_S1D13XXX is not set CONFIG_FB_SH_MOBILE_LCDC=y +# CONFIG_FB_TMIO is not set # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set @@ -1062,7 +1126,46 @@ CONFIG_LOGO=y # CONFIG_LOGO_SUPERH_MONO is not set # CONFIG_LOGO_SUPERH_VGA16 is not set CONFIG_LOGO_SUPERH_CLUT224=y -# CONFIG_SOUND is not set +CONFIG_SOUND=y +CONFIG_SOUND_OSS_CORE=y +CONFIG_SOUND_OSS_CORE_PRECLAIM=y +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_JACK=y +CONFIG_SND_SEQUENCER=y +CONFIG_SND_SEQ_DUMMY=y +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_SEQUENCER_OSS is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set +# CONFIG_SND_DRIVERS is not set +# CONFIG_SND_SPI is not set +CONFIG_SND_SUPERH=y +# CONFIG_SND_USB is not set +CONFIG_SND_SOC=y + +# +# SoC Audio support for SuperH +# +CONFIG_SND_SOC_SH4_FSI=y +# CONFIG_SND_FSI_AK4642 is not set +CONFIG_SND_FSI_DA7210=y +CONFIG_SND_SOC_I2C_AND_SPI=y +# CONFIG_SND_SOC_ALL_CODECS is not set +CONFIG_SND_SOC_DA7210=y +# CONFIG_SOUND_PRIME is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HIDRAW is not set @@ -1077,6 +1180,7 @@ CONFIG_USB_HID=y # # Special HID drivers # +# CONFIG_HID_3M_PCT is not set # CONFIG_HID_A4TECH is not set # CONFIG_HID_APPLE is not set # CONFIG_HID_BELKIN is not set @@ -1091,12 +1195,16 @@ CONFIG_USB_HID=y # CONFIG_HID_KENSINGTON is not set # CONFIG_HID_LOGITECH is not set # CONFIG_HID_MICROSOFT is not set +# CONFIG_HID_MOSART is not set # CONFIG_HID_MONTEREY is not set # CONFIG_HID_NTRIG is not set +# CONFIG_HID_ORTEK is not set # CONFIG_HID_PANTHERLORD is not set # CONFIG_HID_PETALYNX is not set +# CONFIG_HID_QUANTA is not set # CONFIG_HID_SAMSUNG is not set # CONFIG_HID_SONY is not set +# CONFIG_HID_STANTUM is not set # CONFIG_HID_SUNPLUS is not set # CONFIG_HID_GREENASIA is not set # CONFIG_HID_SMARTJOYPLUS is not set @@ -1136,6 +1244,7 @@ CONFIG_USB_MON=y # CONFIG_USB_SL811_HCD is not set CONFIG_USB_R8A66597_HCD=y # CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set # # USB Device Class drivers @@ -1188,7 +1297,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set @@ -1200,8 +1308,45 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_VST is not set -# CONFIG_USB_GADGET is not set +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +# CONFIG_USB_GADGET_DEBUG_FS is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +CONFIG_USB_GADGET_R8A66597=y +CONFIG_USB_R8A66597=y +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C_HSOTG is not set +# CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LANGWELL is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +# CONFIG_USB_ZERO is not set +# CONFIG_USB_AUDIO is not set +# CONFIG_USB_ETH is not set +# CONFIG_USB_GADGETFS is not set +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +# CONFIG_USB_MASS_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set +# CONFIG_USB_G_NOKIA is not set +# CONFIG_USB_G_MULTI is not set # # OTG and related infrastructure @@ -1224,10 +1369,8 @@ CONFIG_MMC_BLOCK_BOUNCE=y # MMC/SD/SDIO Host Controller Drivers # # CONFIG_MMC_SDHCI is not set -# CONFIG_MMC_AT91 is not set -# CONFIG_MMC_ATMELMCI is not set CONFIG_MMC_SPI=y -# CONFIG_MMC_TMIO is not set +CONFIG_MMC_TMIO=y # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set @@ -1253,10 +1396,10 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_DS1374 is not set # CONFIG_RTC_DRV_DS1672 is not set # CONFIG_RTC_DRV_MAX6900 is not set -# CONFIG_RTC_DRV_RS5C372 is not set +CONFIG_RTC_DRV_RS5C372=y # CONFIG_RTC_DRV_ISL1208 is not set # CONFIG_RTC_DRV_X1205 is not set -CONFIG_RTC_DRV_PCF8563=y +# CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_BQ32K is not set @@ -1303,8 +1446,6 @@ CONFIG_RTC_DRV_PCF8563=y CONFIG_UIO=y # CONFIG_UIO_PDRV is not set CONFIG_UIO_PDRV_GENIRQ=y -# CONFIG_UIO_SMX is not set -# CONFIG_UIO_SERCOS3 is not set # # TI VLYNQ @@ -1390,6 +1531,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set # CONFIG_UBIFS_FS is not set +# CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -1418,6 +1560,7 @@ CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set +# CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set @@ -1487,6 +1630,7 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LKDTM is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y @@ -1618,7 +1762,7 @@ CONFIG_CRYPTO_HW=y # CONFIG_BITREVERSE=y CONFIG_GENERIC_FIND_LAST_BIT=y -# CONFIG_CRC_CCITT is not set +CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=y diff --git a/arch/sh/include/asm/elf.h b/arch/sh/include/asm/elf.h index ac04255022b..ce830faeebb 100644 --- a/arch/sh/include/asm/elf.h +++ b/arch/sh/include/asm/elf.h @@ -211,7 +211,9 @@ extern void __kernel_vsyscall; #define VSYSCALL_AUX_ENT \ if (vdso_enabled) \ - NEW_AUX_ENT(AT_SYSINFO_EHDR, VDSO_BASE); + NEW_AUX_ENT(AT_SYSINFO_EHDR, VDSO_BASE); \ + else \ + NEW_AUX_ENT(AT_IGNORE, 0); #else #define VSYSCALL_AUX_ENT #endif /* CONFIG_VSYSCALL */ @@ -219,7 +221,7 @@ extern void __kernel_vsyscall; #ifdef CONFIG_SH_FPU #define FPU_AUX_ENT NEW_AUX_ENT(AT_FPUCW, FPSCR_INIT) #else -#define FPU_AUX_ENT +#define FPU_AUX_ENT NEW_AUX_ENT(AT_IGNORE, 0) #endif extern int l1i_cache_shape, l1d_cache_shape, l2_cache_shape; diff --git a/arch/sh/include/cpu-sh4/cpu/mmu_context.h b/arch/sh/include/cpu-sh4/cpu/mmu_context.h index 03ea75c5315..5963124c1d4 100644 --- a/arch/sh/include/cpu-sh4/cpu/mmu_context.h +++ b/arch/sh/include/cpu-sh4/cpu/mmu_context.h @@ -19,6 +19,8 @@ #define MMUCR 0xFF000010 /* MMU Control Register */ +#define MMU_ITLB_ADDRESS_ARRAY 0xF2000000 +#define MMU_ITLB_ADDRESS_ARRAY2 0xF2800000 #define MMU_UTLB_ADDRESS_ARRAY 0xF6000000 #define MMU_UTLB_ADDRESS_ARRAY2 0xF6800000 #define MMU_PAGE_ASSOC_BIT 0x80 @@ -28,6 +30,8 @@ #define MMUCR_URB 0x00FC0000 #define MMUCR_URB_SHIFT 18 #define MMUCR_URB_NENTRIES 64 +#define MMUCR_URC 0x0000FC00 +#define MMUCR_URC_SHIFT 10 #if defined(CONFIG_32BIT) && defined(CONFIG_CPU_SUBTYPE_ST40) #define MMUCR_SE (1 << 4) diff --git a/arch/sh/include/cpu-sh4/cpu/watchdog.h b/arch/sh/include/cpu-sh4/cpu/watchdog.h index 7672301d0c7..7f62b938093 100644 --- a/arch/sh/include/cpu-sh4/cpu/watchdog.h +++ b/arch/sh/include/cpu-sh4/cpu/watchdog.h @@ -21,6 +21,12 @@ #define WTCNT 0xffcc0000 /*WDTST*/ #define WTST WTCNT #define WTBST 0xffcc0008 /*WDTBST*/ +/* Register definitions */ +#elif defined(CONFIG_CPU_SUBTYPE_SH7722) || \ + defined(CONFIG_CPU_SUBTYPE_SH7723) || \ + defined(CONFIG_CPU_SUBTYPE_SH7724) +#define WTCNT 0xa4520000 +#define WTCSR 0xa4520004 #else /* Register definitions */ #define WTCNT 0xffc00008 diff --git a/arch/sh/kernel/cpufreq.c b/arch/sh/kernel/cpufreq.c index dce4f3ff093..0fffacea6ed 100644 --- a/arch/sh/kernel/cpufreq.c +++ b/arch/sh/kernel/cpufreq.c @@ -48,7 +48,7 @@ static int sh_cpufreq_target(struct cpufreq_policy *policy, return -ENODEV; cpus_allowed = current->cpus_allowed; - set_cpus_allowed(current, cpumask_of_cpu(cpu)); + set_cpus_allowed_ptr(current, cpumask_of(cpu)); BUG_ON(smp_processor_id() != cpu); @@ -66,7 +66,7 @@ static int sh_cpufreq_target(struct cpufreq_policy *policy, freqs.flags = 0; cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - set_cpus_allowed(current, cpus_allowed); + set_cpus_allowed_ptr(current, &cpus_allowed); clk_set_rate(cpuclk, freq); cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); diff --git a/arch/sh/kernel/dwarf.c b/arch/sh/kernel/dwarf.c index bd1c497280a..94739ee7aa7 100644 --- a/arch/sh/kernel/dwarf.c +++ b/arch/sh/kernel/dwarf.c @@ -727,7 +727,7 @@ static int dwarf_parse_cie(void *entry, void *p, unsigned long len, unsigned char *end, struct module *mod) { struct rb_node **rb_node = &cie_root.rb_node; - struct rb_node *parent; + struct rb_node *parent = *rb_node; struct dwarf_cie *cie; unsigned long flags; int count; @@ -856,7 +856,7 @@ static int dwarf_parse_fde(void *entry, u32 entry_type, unsigned char *end, struct module *mod) { struct rb_node **rb_node = &fde_root.rb_node; - struct rb_node *parent; + struct rb_node *parent = *rb_node; struct dwarf_fde *fde; struct dwarf_cie *cie; unsigned long flags; diff --git a/arch/sh/kernel/idle.c b/arch/sh/kernel/idle.c index 0fd7b41f0a2..273f890b17a 100644 --- a/arch/sh/kernel/idle.c +++ b/arch/sh/kernel/idle.c @@ -112,7 +112,7 @@ void cpu_idle(void) } } -void __cpuinit select_idle_routine(void) +void __init select_idle_routine(void) { /* * If a platform has set its own idle routine, leave it alone. diff --git a/arch/sh/kernel/perf_event.c b/arch/sh/kernel/perf_event.c index 9f253e9cce0..81b6de41ae5 100644 --- a/arch/sh/kernel/perf_event.c +++ b/arch/sh/kernel/perf_event.c @@ -315,7 +315,7 @@ void hw_perf_disable(void) sh_pmu->disable_all(); } -int register_sh_pmu(struct sh_pmu *pmu) +int __cpuinit register_sh_pmu(struct sh_pmu *pmu) { if (sh_pmu) return -EBUSY; diff --git a/arch/sh/kernel/process_64.c b/arch/sh/kernel/process_64.c index c90957a459a..c0d40f671ec 100644 --- a/arch/sh/kernel/process_64.c +++ b/arch/sh/kernel/process_64.c @@ -504,13 +504,6 @@ out: return error; } -/* - * These bracket the sleeping functions.. - */ -extern void interruptible_sleep_on(wait_queue_head_t *q); - -#define mid_sched ((unsigned long) interruptible_sleep_on) - #ifdef CONFIG_FRAME_POINTER static int in_sh64_switch_to(unsigned long pc) { diff --git a/arch/sh/kernel/return_address.c b/arch/sh/kernel/return_address.c index df3ab581107..cbf1dd5372b 100644 --- a/arch/sh/kernel/return_address.c +++ b/arch/sh/kernel/return_address.c @@ -9,6 +9,7 @@ * for more details. */ #include <linux/kernel.h> +#include <linux/module.h> #include <asm/dwarf.h> #ifdef CONFIG_DWARF_UNWINDER @@ -52,3 +53,5 @@ void *return_address(unsigned int depth) } #endif + +EXPORT_SYMBOL_GPL(return_address); diff --git a/arch/sh/kernel/smp.c b/arch/sh/kernel/smp.c index e124cf7008d..002cc612dee 100644 --- a/arch/sh/kernel/smp.c +++ b/arch/sh/kernel/smp.c @@ -69,6 +69,7 @@ asmlinkage void __cpuinit start_secondary(void) unsigned int cpu; struct mm_struct *mm = &init_mm; + enable_mmu(); atomic_inc(&mm->mm_count); atomic_inc(&mm->mm_users); current->active_mm = mm; diff --git a/arch/sh/mm/pmb.c b/arch/sh/mm/pmb.c index a4662e2782c..3cc21933063 100644 --- a/arch/sh/mm/pmb.c +++ b/arch/sh/mm/pmb.c @@ -323,6 +323,7 @@ static void __clear_pmb_entry(struct pmb_entry *pmbe) writel_uncached(data_val & ~PMB_V, data); } +#ifdef CONFIG_PM static void set_pmb_entry(struct pmb_entry *pmbe) { unsigned long flags; @@ -331,6 +332,7 @@ static void set_pmb_entry(struct pmb_entry *pmbe) __set_pmb_entry(pmbe); spin_unlock_irqrestore(&pmbe->lock, flags); } +#endif /* CONFIG_PM */ int pmb_bolt_mapping(unsigned long vaddr, phys_addr_t phys, unsigned long size, pgprot_t prot) @@ -802,7 +804,7 @@ void __init pmb_init(void) writel_uncached(0, PMB_IRMCR); /* Flush out the TLB */ - __raw_writel(__raw_readl(MMUCR) | MMUCR_TI, MMUCR); + local_flush_tlb_all(); ctrl_barrier(); } diff --git a/arch/sh/mm/tlb-pteaex.c b/arch/sh/mm/tlb-pteaex.c index 32dc674c550..b71db6af806 100644 --- a/arch/sh/mm/tlb-pteaex.c +++ b/arch/sh/mm/tlb-pteaex.c @@ -73,5 +73,35 @@ void local_flush_tlb_one(unsigned long asid, unsigned long page) jump_to_uncached(); __raw_writel(page, MMU_UTLB_ADDRESS_ARRAY | MMU_PAGE_ASSOC_BIT); __raw_writel(asid, MMU_UTLB_ADDRESS_ARRAY2 | MMU_PAGE_ASSOC_BIT); + __raw_writel(page, MMU_ITLB_ADDRESS_ARRAY | MMU_PAGE_ASSOC_BIT); + __raw_writel(asid, MMU_ITLB_ADDRESS_ARRAY2 | MMU_PAGE_ASSOC_BIT); back_to_cached(); } + +void local_flush_tlb_all(void) +{ + unsigned long flags, status; + int i; + + /* + * Flush all the TLB. + */ + local_irq_save(flags); + jump_to_uncached(); + + status = __raw_readl(MMUCR); + status = ((status & MMUCR_URB) >> MMUCR_URB_SHIFT); + + if (status == 0) + status = MMUCR_URB_NENTRIES; + + for (i = 0; i < status; i++) + __raw_writel(0x0, MMU_UTLB_ADDRESS_ARRAY | (i << 8)); + + for (i = 0; i < 4; i++) + __raw_writel(0x0, MMU_ITLB_ADDRESS_ARRAY | (i << 8)); + + back_to_cached(); + ctrl_barrier(); + local_irq_restore(flags); +} diff --git a/arch/sh/mm/tlb-sh3.c b/arch/sh/mm/tlb-sh3.c index 4f5f7cbdd50..7a940dbfc2e 100644 --- a/arch/sh/mm/tlb-sh3.c +++ b/arch/sh/mm/tlb-sh3.c @@ -77,3 +77,22 @@ void local_flush_tlb_one(unsigned long asid, unsigned long page) for (i = 0; i < ways; i++) __raw_writel(data, addr + (i << 8)); } + +void local_flush_tlb_all(void) +{ + unsigned long flags, status; + + /* + * Flush all the TLB. + * + * Write to the MMU control register's bit: + * TF-bit for SH-3, TI-bit for SH-4. + * It's same position, bit #2. + */ + local_irq_save(flags); + status = __raw_readl(MMUCR); + status |= 0x04; + __raw_writel(status, MMUCR); + ctrl_barrier(); + local_irq_restore(flags); +} diff --git a/arch/sh/mm/tlb-sh4.c b/arch/sh/mm/tlb-sh4.c index ccac77f504a..cfdf7930d29 100644 --- a/arch/sh/mm/tlb-sh4.c +++ b/arch/sh/mm/tlb-sh4.c @@ -80,3 +80,31 @@ void local_flush_tlb_one(unsigned long asid, unsigned long page) __raw_writel(data, addr); back_to_cached(); } + +void local_flush_tlb_all(void) +{ + unsigned long flags, status; + int i; + + /* + * Flush all the TLB. + */ + local_irq_save(flags); + jump_to_uncached(); + + status = __raw_readl(MMUCR); + status = ((status & MMUCR_URB) >> MMUCR_URB_SHIFT); + + if (status == 0) + status = MMUCR_URB_NENTRIES; + + for (i = 0; i < status; i++) + __raw_writel(0x0, MMU_UTLB_ADDRESS_ARRAY | (i << 8)); + + for (i = 0; i < 4; i++) + __raw_writel(0x0, MMU_ITLB_ADDRESS_ARRAY | (i << 8)); + + back_to_cached(); + ctrl_barrier(); + local_irq_restore(flags); +} diff --git a/arch/sh/mm/tlb-urb.c b/arch/sh/mm/tlb-urb.c index bb5b9098956..c92ce20db39 100644 --- a/arch/sh/mm/tlb-urb.c +++ b/arch/sh/mm/tlb-urb.c @@ -24,13 +24,9 @@ void tlb_wire_entry(struct vm_area_struct *vma, unsigned long addr, pte_t pte) local_irq_save(flags); - /* Load the entry into the TLB */ - __update_tlb(vma, addr, pte); - - /* ... and wire it up. */ status = __raw_readl(MMUCR); urb = (status & MMUCR_URB) >> MMUCR_URB_SHIFT; - status &= ~MMUCR_URB; + status &= ~MMUCR_URC; /* * Make sure we're not trying to wire the last TLB entry slot. @@ -39,7 +35,23 @@ void tlb_wire_entry(struct vm_area_struct *vma, unsigned long addr, pte_t pte) urb = urb % MMUCR_URB_NENTRIES; + /* + * Insert this entry into the highest non-wired TLB slot (via + * the URC field). + */ + status |= (urb << MMUCR_URC_SHIFT); + __raw_writel(status, MMUCR); + ctrl_barrier(); + + /* Load the entry into the TLB */ + __update_tlb(vma, addr, pte); + + /* ... and wire it up. */ + status = __raw_readl(MMUCR); + + status &= ~MMUCR_URB; status |= (urb << MMUCR_URB_SHIFT); + __raw_writel(status, MMUCR); ctrl_barrier(); diff --git a/arch/sh/mm/tlbflush_32.c b/arch/sh/mm/tlbflush_32.c index 004bb3f25b5..3fbe03ce8fe 100644 --- a/arch/sh/mm/tlbflush_32.c +++ b/arch/sh/mm/tlbflush_32.c @@ -119,22 +119,3 @@ void local_flush_tlb_mm(struct mm_struct *mm) local_irq_restore(flags); } } - -void local_flush_tlb_all(void) -{ - unsigned long flags, status; - - /* - * Flush all the TLB. - * - * Write to the MMU control register's bit: - * TF-bit for SH-3, TI-bit for SH-4. - * It's same position, bit #2. - */ - local_irq_save(flags); - status = __raw_readl(MMUCR); - status |= 0x04; - __raw_writel(status, MMUCR); - ctrl_barrier(); - local_irq_restore(flags); -} diff --git a/arch/sparc/include/asm/stat.h b/arch/sparc/include/asm/stat.h index 39327d6a57e..a232e9e1f4e 100644 --- a/arch/sparc/include/asm/stat.h +++ b/arch/sparc/include/asm/stat.h @@ -53,8 +53,8 @@ struct stat { ino_t st_ino; mode_t st_mode; short st_nlink; - uid16_t st_uid; - gid16_t st_gid; + unsigned short st_uid; + unsigned short st_gid; unsigned short st_rdev; off_t st_size; time_t st_atime; diff --git a/arch/sparc/kernel/perf_event.c b/arch/sparc/kernel/perf_event.c index 68cb9b42088..e2771939341 100644 --- a/arch/sparc/kernel/perf_event.c +++ b/arch/sparc/kernel/perf_event.c @@ -1337,7 +1337,7 @@ static void perf_callchain_user_32(struct pt_regs *regs, callchain_store(entry, PERF_CONTEXT_USER); callchain_store(entry, regs->tpc); - ufp = regs->u_regs[UREG_I6]; + ufp = regs->u_regs[UREG_I6] & 0xffffffffUL; do { struct sparc_stackf32 *usf, sf; unsigned long pc; diff --git a/arch/sparc/kernel/sysfs.c b/arch/sparc/kernel/sysfs.c index ca39c606fe8..1eb8b00aed7 100644 --- a/arch/sparc/kernel/sysfs.c +++ b/arch/sparc/kernel/sysfs.c @@ -107,12 +107,12 @@ static unsigned long run_on_cpu(unsigned long cpu, unsigned long ret; /* should return -EINVAL to userspace */ - if (set_cpus_allowed(current, cpumask_of_cpu(cpu))) + if (set_cpus_allowed_ptr(current, cpumask_of(cpu))) return 0; ret = func(arg); - set_cpus_allowed(current, old_affinity); + set_cpus_allowed_ptr(current, &old_affinity); return ret; } diff --git a/arch/sparc/kernel/us2e_cpufreq.c b/arch/sparc/kernel/us2e_cpufreq.c index 791c15138f3..8f982b76c71 100644 --- a/arch/sparc/kernel/us2e_cpufreq.c +++ b/arch/sparc/kernel/us2e_cpufreq.c @@ -238,12 +238,12 @@ static unsigned int us2e_freq_get(unsigned int cpu) return 0; cpus_allowed = current->cpus_allowed; - set_cpus_allowed(current, cpumask_of_cpu(cpu)); + set_cpus_allowed_ptr(current, cpumask_of(cpu)); clock_tick = sparc64_get_clock_tick(cpu) / 1000; estar = read_hbreg(HBIRD_ESTAR_MODE_ADDR); - set_cpus_allowed(current, cpus_allowed); + set_cpus_allowed_ptr(current, &cpus_allowed); return clock_tick / estar_to_divisor(estar); } @@ -259,7 +259,7 @@ static void us2e_set_cpu_divider_index(unsigned int cpu, unsigned int index) return; cpus_allowed = current->cpus_allowed; - set_cpus_allowed(current, cpumask_of_cpu(cpu)); + set_cpus_allowed_ptr(current, cpumask_of(cpu)); new_freq = clock_tick = sparc64_get_clock_tick(cpu) / 1000; new_bits = index_to_estar_mode(index); @@ -281,7 +281,7 @@ static void us2e_set_cpu_divider_index(unsigned int cpu, unsigned int index) cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - set_cpus_allowed(current, cpus_allowed); + set_cpus_allowed_ptr(current, &cpus_allowed); } static int us2e_freq_target(struct cpufreq_policy *policy, diff --git a/arch/sparc/kernel/us3_cpufreq.c b/arch/sparc/kernel/us3_cpufreq.c index 365b6464e2c..f35d1e79454 100644 --- a/arch/sparc/kernel/us3_cpufreq.c +++ b/arch/sparc/kernel/us3_cpufreq.c @@ -86,12 +86,12 @@ static unsigned int us3_freq_get(unsigned int cpu) return 0; cpus_allowed = current->cpus_allowed; - set_cpus_allowed(current, cpumask_of_cpu(cpu)); + set_cpus_allowed_ptr(current, cpumask_of(cpu)); reg = read_safari_cfg(); ret = get_current_freq(cpu, reg); - set_cpus_allowed(current, cpus_allowed); + set_cpus_allowed_ptr(current, &cpus_allowed); return ret; } @@ -106,7 +106,7 @@ static void us3_set_cpu_divider_index(unsigned int cpu, unsigned int index) return; cpus_allowed = current->cpus_allowed; - set_cpus_allowed(current, cpumask_of_cpu(cpu)); + set_cpus_allowed_ptr(current, cpumask_of(cpu)); new_freq = sparc64_get_clock_tick(cpu) / 1000; switch (index) { @@ -140,7 +140,7 @@ static void us3_set_cpu_divider_index(unsigned int cpu, unsigned int index) cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - set_cpus_allowed(current, cpus_allowed); + set_cpus_allowed_ptr(current, &cpus_allowed); } static int us3_freq_target(struct cpufreq_policy *policy, diff --git a/arch/x86/include/asm/fixmap.h b/arch/x86/include/asm/fixmap.h index 635f03bb499..d07b44f7d1d 100644 --- a/arch/x86/include/asm/fixmap.h +++ b/arch/x86/include/asm/fixmap.h @@ -82,6 +82,9 @@ enum fixed_addresses { #endif FIX_DBGP_BASE, FIX_EARLYCON_MEM_BASE, +#ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT + FIX_OHCI1394_BASE, +#endif #ifdef CONFIG_X86_LOCAL_APIC FIX_APIC_BASE, /* local (CPU) APIC) -- required for SMP or not */ #endif @@ -132,9 +135,6 @@ enum fixed_addresses { (__end_of_permanent_fixed_addresses & (TOTAL_FIX_BTMAPS - 1)) : __end_of_permanent_fixed_addresses, FIX_BTMAP_BEGIN = FIX_BTMAP_END + TOTAL_FIX_BTMAPS - 1, -#ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT - FIX_OHCI1394_BASE, -#endif #ifdef CONFIG_X86_32 FIX_WP_TEST, #endif diff --git a/arch/x86/include/asm/hw_irq.h b/arch/x86/include/asm/hw_irq.h index a929c9ede33..46c0fe05f23 100644 --- a/arch/x86/include/asm/hw_irq.h +++ b/arch/x86/include/asm/hw_irq.h @@ -133,6 +133,7 @@ extern void (*__initconst interrupt[NR_VECTORS-FIRST_EXTERNAL_VECTOR])(void); typedef int vector_irq_t[NR_VECTORS]; DECLARE_PER_CPU(vector_irq_t, vector_irq); +extern void setup_vector_irq(int cpu); #ifdef CONFIG_X86_IO_APIC extern void lock_vector_lock(void); diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h index 1cd58cdbc03..4604e6a54d3 100644 --- a/arch/x86/include/asm/msr-index.h +++ b/arch/x86/include/asm/msr-index.h @@ -105,6 +105,8 @@ #define MSR_AMD64_PATCH_LEVEL 0x0000008b #define MSR_AMD64_NB_CFG 0xc001001f #define MSR_AMD64_PATCH_LOADER 0xc0010020 +#define MSR_AMD64_OSVW_ID_LENGTH 0xc0010140 +#define MSR_AMD64_OSVW_STATUS 0xc0010141 #define MSR_AMD64_IBSFETCHCTL 0xc0011030 #define MSR_AMD64_IBSFETCHLINAD 0xc0011031 #define MSR_AMD64_IBSFETCHPHYSAD 0xc0011032 diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index e4e0ddcb154..463de9a858a 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -1268,6 +1268,14 @@ void __setup_vector_irq(int cpu) /* Mark the inuse vectors */ for_each_irq_desc(irq, desc) { cfg = desc->chip_data; + + /* + * If it is a legacy IRQ handled by the legacy PIC, this cpu + * will be part of the irq_cfg's domain. + */ + if (irq < legacy_pic->nr_legacy_irqs && !IO_APIC_IRQ(irq)) + cpumask_set_cpu(cpu, cfg->domain); + if (!cpumask_test_cpu(cpu, cfg->domain)) continue; vector = cfg->vector; diff --git a/arch/x86/kernel/cpu/perf_event_amd.c b/arch/x86/kernel/cpu/perf_event_amd.c index 573458f1caf..b87e0b6970c 100644 --- a/arch/x86/kernel/cpu/perf_event_amd.c +++ b/arch/x86/kernel/cpu/perf_event_amd.c @@ -348,10 +348,12 @@ static void amd_pmu_cpu_offline(int cpu) raw_spin_lock(&amd_nb_lock); - if (--cpuhw->amd_nb->refcnt == 0) - kfree(cpuhw->amd_nb); + if (cpuhw->amd_nb) { + if (--cpuhw->amd_nb->refcnt == 0) + kfree(cpuhw->amd_nb); - cpuhw->amd_nb = NULL; + cpuhw->amd_nb = NULL; + } raw_spin_unlock(&amd_nb_lock); } diff --git a/arch/x86/kernel/head32.c b/arch/x86/kernel/head32.c index adedeef1ded..b2e24603739 100644 --- a/arch/x86/kernel/head32.c +++ b/arch/x86/kernel/head32.c @@ -7,6 +7,7 @@ #include <linux/init.h> #include <linux/start_kernel.h> +#include <linux/mm.h> #include <asm/setup.h> #include <asm/sections.h> @@ -44,9 +45,10 @@ void __init i386_start_kernel(void) #ifdef CONFIG_BLK_DEV_INITRD /* Reserve INITRD */ if (boot_params.hdr.type_of_loader && boot_params.hdr.ramdisk_image) { + /* Assume only end is not page aligned */ u64 ramdisk_image = boot_params.hdr.ramdisk_image; u64 ramdisk_size = boot_params.hdr.ramdisk_size; - u64 ramdisk_end = ramdisk_image + ramdisk_size; + u64 ramdisk_end = PAGE_ALIGN(ramdisk_image + ramdisk_size); reserve_early(ramdisk_image, ramdisk_end, "RAMDISK"); } #endif diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c index b5a9896ca1e..7147143fd61 100644 --- a/arch/x86/kernel/head64.c +++ b/arch/x86/kernel/head64.c @@ -103,9 +103,10 @@ void __init x86_64_start_reservations(char *real_mode_data) #ifdef CONFIG_BLK_DEV_INITRD /* Reserve INITRD */ if (boot_params.hdr.type_of_loader && boot_params.hdr.ramdisk_image) { + /* Assume only end is not page aligned */ unsigned long ramdisk_image = boot_params.hdr.ramdisk_image; unsigned long ramdisk_size = boot_params.hdr.ramdisk_size; - unsigned long ramdisk_end = ramdisk_image + ramdisk_size; + unsigned long ramdisk_end = PAGE_ALIGN(ramdisk_image + ramdisk_size); reserve_early(ramdisk_image, ramdisk_end, "RAMDISK"); } #endif diff --git a/arch/x86/kernel/irqinit.c b/arch/x86/kernel/irqinit.c index ef257fc2921..f01d390f9c5 100644 --- a/arch/x86/kernel/irqinit.c +++ b/arch/x86/kernel/irqinit.c @@ -141,6 +141,28 @@ void __init init_IRQ(void) x86_init.irqs.intr_init(); } +/* + * Setup the vector to irq mappings. + */ +void setup_vector_irq(int cpu) +{ +#ifndef CONFIG_X86_IO_APIC + int irq; + + /* + * On most of the platforms, legacy PIC delivers the interrupts on the + * boot cpu. But there are certain platforms where PIC interrupts are + * delivered to multiple cpu's. If the legacy IRQ is handled by the + * legacy PIC, for the new cpu that is coming online, setup the static + * legacy vector to irq mapping: + */ + for (irq = 0; irq < legacy_pic->nr_legacy_irqs; irq++) + per_cpu(vector_irq, cpu)[IRQ0_VECTOR + irq] = irq; +#endif + + __setup_vector_irq(cpu); +} + static void __init smp_intr_init(void) { #ifdef CONFIG_SMP diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index ad9540676fc..28ad9f4d8b9 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -526,21 +526,37 @@ static int __cpuinit mwait_usable(const struct cpuinfo_x86 *c) } /* - * Check for AMD CPUs, which have potentially C1E support + * Check for AMD CPUs, where APIC timer interrupt does not wake up CPU from C1e. + * For more information see + * - Erratum #400 for NPT family 0xf and family 0x10 CPUs + * - Erratum #365 for family 0x11 (not affected because C1e not in use) */ static int __cpuinit check_c1e_idle(const struct cpuinfo_x86 *c) { + u64 val; if (c->x86_vendor != X86_VENDOR_AMD) - return 0; - - if (c->x86 < 0x0F) - return 0; + goto no_c1e_idle; /* Family 0x0f models < rev F do not have C1E */ - if (c->x86 == 0x0f && c->x86_model < 0x40) - return 0; + if (c->x86 == 0x0F && c->x86_model >= 0x40) + return 1; - return 1; + if (c->x86 == 0x10) { + /* + * check OSVW bit for CPUs that are not affected + * by erratum #400 + */ + rdmsrl(MSR_AMD64_OSVW_ID_LENGTH, val); + if (val >= 2) { + rdmsrl(MSR_AMD64_OSVW_STATUS, val); + if (!(val & BIT(1))) + goto no_c1e_idle; + } + return 1; + } + +no_c1e_idle: + return 0; } static cpumask_var_t c1e_mask; diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index 5d7ba1a449b..d76e18570c6 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -314,16 +314,17 @@ static void __init reserve_brk(void) #define MAX_MAP_CHUNK (NR_FIX_BTMAPS << PAGE_SHIFT) static void __init relocate_initrd(void) { - + /* Assume only end is not page aligned */ u64 ramdisk_image = boot_params.hdr.ramdisk_image; u64 ramdisk_size = boot_params.hdr.ramdisk_size; + u64 area_size = PAGE_ALIGN(ramdisk_size); u64 end_of_lowmem = max_low_pfn_mapped << PAGE_SHIFT; u64 ramdisk_here; unsigned long slop, clen, mapaddr; char *p, *q; /* We need to move the initrd down into lowmem */ - ramdisk_here = find_e820_area(0, end_of_lowmem, ramdisk_size, + ramdisk_here = find_e820_area(0, end_of_lowmem, area_size, PAGE_SIZE); if (ramdisk_here == -1ULL) @@ -332,7 +333,7 @@ static void __init relocate_initrd(void) /* Note: this includes all the lowmem currently occupied by the initrd, we rely on that fact to keep the data intact. */ - reserve_early(ramdisk_here, ramdisk_here + ramdisk_size, + reserve_early(ramdisk_here, ramdisk_here + area_size, "NEW RAMDISK"); initrd_start = ramdisk_here + PAGE_OFFSET; initrd_end = initrd_start + ramdisk_size; @@ -376,9 +377,10 @@ static void __init relocate_initrd(void) static void __init reserve_initrd(void) { + /* Assume only end is not page aligned */ u64 ramdisk_image = boot_params.hdr.ramdisk_image; u64 ramdisk_size = boot_params.hdr.ramdisk_size; - u64 ramdisk_end = ramdisk_image + ramdisk_size; + u64 ramdisk_end = PAGE_ALIGN(ramdisk_image + ramdisk_size); u64 end_of_lowmem = max_low_pfn_mapped << PAGE_SHIFT; if (!boot_params.hdr.type_of_loader || diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index a02e80c3c54..06d98ae5a80 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -247,7 +247,7 @@ static void __cpuinit smp_callin(void) /* * Need to setup vector mappings before we enable interrupts. */ - __setup_vector_irq(smp_processor_id()); + setup_vector_irq(smp_processor_id()); /* * Get our bogomips. * diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S index 44879df5569..2cc249718c4 100644 --- a/arch/x86/kernel/vmlinux.lds.S +++ b/arch/x86/kernel/vmlinux.lds.S @@ -291,8 +291,8 @@ SECTIONS .smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) { __smp_locks = .; *(.smp_locks) - __smp_locks_end = .; . = ALIGN(PAGE_SIZE); + __smp_locks_end = .; } #ifdef CONFIG_X86_64 diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c index e71c5cbc8f3..452ee5b8f30 100644 --- a/arch/x86/mm/init.c +++ b/arch/x86/mm/init.c @@ -331,11 +331,23 @@ int devmem_is_allowed(unsigned long pagenr) void free_init_pages(char *what, unsigned long begin, unsigned long end) { - unsigned long addr = begin; + unsigned long addr; + unsigned long begin_aligned, end_aligned; - if (addr >= end) + /* Make sure boundaries are page aligned */ + begin_aligned = PAGE_ALIGN(begin); + end_aligned = end & PAGE_MASK; + + if (WARN_ON(begin_aligned != begin || end_aligned != end)) { + begin = begin_aligned; + end = end_aligned; + } + + if (begin >= end) return; + addr = begin; + /* * If debugging page accesses then do not free this memory but * mark them not present - any buggy init-section access will @@ -343,7 +355,7 @@ void free_init_pages(char *what, unsigned long begin, unsigned long end) */ #ifdef CONFIG_DEBUG_PAGEALLOC printk(KERN_INFO "debug: unmapping init memory %08lx..%08lx\n", - begin, PAGE_ALIGN(end)); + begin, end); set_memory_np(begin, (end - begin) >> PAGE_SHIFT); #else /* @@ -358,8 +370,7 @@ void free_init_pages(char *what, unsigned long begin, unsigned long end) for (; addr < end; addr += PAGE_SIZE) { ClearPageReserved(virt_to_page(addr)); init_page_count(virt_to_page(addr)); - memset((void *)(addr & ~(PAGE_SIZE-1)), - POISON_FREE_INITMEM, PAGE_SIZE); + memset((void *)addr, POISON_FREE_INITMEM, PAGE_SIZE); free_page(addr); totalram_pages++; } @@ -376,6 +387,15 @@ void free_initmem(void) #ifdef CONFIG_BLK_DEV_INITRD void free_initrd_mem(unsigned long start, unsigned long end) { - free_init_pages("initrd memory", start, end); + /* + * end could be not aligned, and We can not align that, + * decompresser could be confused by aligned initrd_end + * We already reserve the end partial page before in + * - i386_start_kernel() + * - x86_64_start_kernel() + * - relocate_initrd() + * So here We can do PAGE_ALIGN() safely to get partial page to be freed + */ + free_init_pages("initrd memory", start, PAGE_ALIGN(end)); } #endif diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c index 6e22454bfaa..e31160216ef 100644 --- a/arch/x86/pci/acpi.c +++ b/arch/x86/pci/acpi.c @@ -122,8 +122,8 @@ setup_resource(struct acpi_resource *acpi_res, void *data) struct acpi_resource_address64 addr; acpi_status status; unsigned long flags; - struct resource *root; - u64 start, end; + struct resource *root, *conflict; + u64 start, end, max_len; status = resource_to_addr(acpi_res, &addr); if (!ACPI_SUCCESS(status)) @@ -140,6 +140,17 @@ setup_resource(struct acpi_resource *acpi_res, void *data) } else return AE_OK; + max_len = addr.maximum - addr.minimum + 1; + if (addr.address_length > max_len) { + dev_printk(KERN_DEBUG, &info->bridge->dev, + "host bridge window length %#llx doesn't fit in " + "%#llx-%#llx, trimming\n", + (unsigned long long) addr.address_length, + (unsigned long long) addr.minimum, + (unsigned long long) addr.maximum); + addr.address_length = max_len; + } + start = addr.minimum + addr.translation_offset; end = start + addr.address_length - 1; @@ -157,9 +168,12 @@ setup_resource(struct acpi_resource *acpi_res, void *data) return AE_OK; } - if (insert_resource(root, res)) { + conflict = insert_resource_conflict(root, res); + if (conflict) { dev_err(&info->bridge->dev, - "can't allocate host bridge window %pR\n", res); + "address space collision: host bridge window %pR " + "conflicts with %s %pR\n", + res, conflict->name, conflict); } else { pci_bus_add_resource(info->bus, res, 0); info->res_num++; diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c index dece3eb9c90..46fd43f7910 100644 --- a/arch/x86/pci/i386.c +++ b/arch/x86/pci/i386.c @@ -127,9 +127,6 @@ static void __init pcibios_allocate_bus_resources(struct list_head *bus_list) continue; if (!r->start || pci_claim_resource(dev, idx) < 0) { - dev_info(&dev->dev, - "can't reserve window %pR\n", - r); /* * Something is wrong with the region. * Invalidate the resource to prevent @@ -181,8 +178,6 @@ static void __init pcibios_allocate_resources(int pass) "BAR %d: reserving %pr (d=%d, p=%d)\n", idx, r, disabled, pass); if (pci_claim_resource(dev, idx) < 0) { - dev_info(&dev->dev, - "can't reserve %pR\n", r); /* We'll assign a new address later */ r->end -= r->start; r->start = 0; |