diff options
Diffstat (limited to 'arch')
413 files changed, 19764 insertions, 716 deletions
diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig index 82428c2f234..f56837f69ca 100644 --- a/arch/arm/configs/magician_defconfig +++ b/arch/arm/configs/magician_defconfig @@ -1183,7 +1183,11 @@ CONFIG_RTC_INTF_DEV=y CONFIG_RTC_DRV_SA1100=y # CONFIG_RTC_DRV_PXA is not set # CONFIG_DMADEVICES is not set -# CONFIG_REGULATOR is not set +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_DEBUG is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +CONFIG_REGULATOR_BQ24022=y # CONFIG_UIO is not set # CONFIG_STAGING is not set diff --git a/arch/arm/include/asm/sizes.h b/arch/arm/include/asm/sizes.h index c10d1aa4b48..ada93a8fc2e 100644 --- a/arch/arm/include/asm/sizes.h +++ b/arch/arm/include/asm/sizes.h @@ -32,6 +32,7 @@ #define SZ_4K 0x00001000 #define SZ_8K 0x00002000 #define SZ_16K 0x00004000 +#define SZ_32K 0x00008000 #define SZ_64K 0x00010000 #define SZ_128K 0x00020000 #define SZ_256K 0x00040000 diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h index 793fe7b25f3..e6afff849b8 100644 --- a/arch/arm/mach-at91/include/mach/board.h +++ b/arch/arm/mach-at91/include/mach/board.h @@ -87,7 +87,7 @@ extern void __init at91_add_device_eth(struct at91_eth_data *data); /* USB Host */ struct at91_usbh_data { u8 ports; /* number of ports on root hub */ - u8 vbus_pin[]; /* port power-control pin */ + u8 vbus_pin[2]; /* port power-control pin */ }; extern void __init at91_add_device_usbh(struct at91_usbh_data *data); diff --git a/arch/arm/mach-davinci/board-evm.c b/arch/arm/mach-davinci/board-evm.c index 38b6a9ce2a9..0b97a528902 100644 --- a/arch/arm/mach-davinci/board-evm.c +++ b/arch/arm/mach-davinci/board-evm.c @@ -118,7 +118,7 @@ static struct resource ide_resources[] = { }, }; -static u64 ide_dma_mask = DMA_32BIT_MASK; +static u64 ide_dma_mask = DMA_BIT_MASK(32); static struct platform_device ide_dev = { .name = "palm_bk3710", @@ -127,7 +127,7 @@ static struct platform_device ide_dev = { .num_resources = ARRAY_SIZE(ide_resources), .dev = { .dma_mask = &ide_dma_mask, - .coherent_dma_mask = DMA_32BIT_MASK, + .coherent_dma_mask = DMA_BIT_MASK(32), }, }; diff --git a/arch/arm/mach-davinci/include/mach/nand.h b/arch/arm/mach-davinci/include/mach/nand.h new file mode 100644 index 00000000000..aa482841270 --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/nand.h @@ -0,0 +1,80 @@ +/* + * mach-davinci/nand.h + * + * Copyright © 2006 Texas Instruments. + * + * Ported to 2.6.23 Copyright © 2008 by + * Sander Huijsen <Shuijsen@optelecom-nkf.com> + * Troy Kisky <troy.kisky@boundarydevices.com> + * Dirk Behme <Dirk.Behme@gmail.com> + * + * -------------------------------------------------------------------------- + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ARCH_ARM_DAVINCI_NAND_H +#define __ARCH_ARM_DAVINCI_NAND_H + +#include <linux/mtd/nand.h> + +#define NRCSR_OFFSET 0x00 +#define AWCCR_OFFSET 0x04 +#define A1CR_OFFSET 0x10 +#define NANDFCR_OFFSET 0x60 +#define NANDFSR_OFFSET 0x64 +#define NANDF1ECC_OFFSET 0x70 + +/* 4-bit ECC syndrome registers */ +#define NAND_4BIT_ECC_LOAD_OFFSET 0xbc +#define NAND_4BIT_ECC1_OFFSET 0xc0 +#define NAND_4BIT_ECC2_OFFSET 0xc4 +#define NAND_4BIT_ECC3_OFFSET 0xc8 +#define NAND_4BIT_ECC4_OFFSET 0xcc +#define NAND_ERR_ADD1_OFFSET 0xd0 +#define NAND_ERR_ADD2_OFFSET 0xd4 +#define NAND_ERR_ERRVAL1_OFFSET 0xd8 +#define NAND_ERR_ERRVAL2_OFFSET 0xdc + +/* NOTE: boards don't need to use these address bits + * for ALE/CLE unless they support booting from NAND. + * They're used unless platform data overrides them. + */ +#define MASK_ALE 0x08 +#define MASK_CLE 0x10 + +struct davinci_nand_pdata { /* platform_data */ + uint32_t mask_ale; + uint32_t mask_cle; + + /* for packages using two chipselects */ + uint32_t mask_chipsel; + + /* board's default static partition info */ + struct mtd_partition *parts; + unsigned nr_parts; + + /* none == NAND_ECC_NONE (strongly *not* advised!!) + * soft == NAND_ECC_SOFT + * 1-bit == NAND_ECC_HW + * 4-bit == NAND_ECC_HW_SYNDROME (not on all chips) + */ + nand_ecc_modes_t ecc_mode; + + /* e.g. NAND_BUSWIDTH_16 or NAND_USE_FLASH_BBT */ + unsigned options; +}; + +#endif /* __ARCH_ARM_DAVINCI_NAND_H */ diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c index 69680784448..2429b79f6da 100644 --- a/arch/arm/mach-davinci/usb.c +++ b/arch/arm/mach-davinci/usb.c @@ -64,7 +64,7 @@ static struct resource usb_resources[] = { }, }; -static u64 usb_dmamask = DMA_32BIT_MASK; +static u64 usb_dmamask = DMA_BIT_MASK(32); static struct platform_device usb_dev = { .name = "musb_hdrc", @@ -72,7 +72,7 @@ static struct platform_device usb_dev = { .dev = { .platform_data = &usb_data, .dma_mask = &usb_dmamask, - .coherent_dma_mask = DMA_32BIT_MASK, + .coherent_dma_mask = DMA_BIT_MASK(32), }, .resource = usb_resources, .num_resources = ARRAY_SIZE(usb_resources), diff --git a/arch/arm/mach-iop13xx/setup.c b/arch/arm/mach-iop13xx/setup.c index cfd4d2e6dac..bee42c609df 100644 --- a/arch/arm/mach-iop13xx/setup.c +++ b/arch/arm/mach-iop13xx/setup.c @@ -307,7 +307,7 @@ static struct resource iop13xx_adma_2_resources[] = { } }; -static u64 iop13xx_adma_dmamask = DMA_64BIT_MASK; +static u64 iop13xx_adma_dmamask = DMA_BIT_MASK(64); static struct iop_adma_platform_data iop13xx_adma_0_data = { .hw_id = 0, .pool_size = PAGE_SIZE, @@ -331,7 +331,7 @@ static struct platform_device iop13xx_adma_0_channel = { .resource = iop13xx_adma_0_resources, .dev = { .dma_mask = &iop13xx_adma_dmamask, - .coherent_dma_mask = DMA_64BIT_MASK, + .coherent_dma_mask = DMA_BIT_MASK(64), .platform_data = (void *) &iop13xx_adma_0_data, }, }; @@ -343,7 +343,7 @@ static struct platform_device iop13xx_adma_1_channel = { .resource = iop13xx_adma_1_resources, .dev = { .dma_mask = &iop13xx_adma_dmamask, - .coherent_dma_mask = DMA_64BIT_MASK, + .coherent_dma_mask = DMA_BIT_MASK(64), .platform_data = (void *) &iop13xx_adma_1_data, }, }; @@ -355,7 +355,7 @@ static struct platform_device iop13xx_adma_2_channel = { .resource = iop13xx_adma_2_resources, .dev = { .dma_mask = &iop13xx_adma_dmamask, - .coherent_dma_mask = DMA_64BIT_MASK, + .coherent_dma_mask = DMA_BIT_MASK(64), .platform_data = (void *) &iop13xx_adma_2_data, }, }; diff --git a/arch/arm/mach-iop13xx/tpmi.c b/arch/arm/mach-iop13xx/tpmi.c index c6af1e1bee3..6fdad7a0425 100644 --- a/arch/arm/mach-iop13xx/tpmi.c +++ b/arch/arm/mach-iop13xx/tpmi.c @@ -151,7 +151,7 @@ static struct resource iop13xx_tpmi_3_resources[] = { } }; -u64 iop13xx_tpmi_mask = DMA_64BIT_MASK; +u64 iop13xx_tpmi_mask = DMA_BIT_MASK(64); static struct platform_device iop13xx_tpmi_0_device = { .name = "iop-tpmi", .id = 0, @@ -159,7 +159,7 @@ static struct platform_device iop13xx_tpmi_0_device = { .resource = iop13xx_tpmi_0_resources, .dev = { .dma_mask = &iop13xx_tpmi_mask, - .coherent_dma_mask = DMA_64BIT_MASK, + .coherent_dma_mask = DMA_BIT_MASK(64), }, }; @@ -170,7 +170,7 @@ static struct platform_device iop13xx_tpmi_1_device = { .resource = iop13xx_tpmi_1_resources, .dev = { .dma_mask = &iop13xx_tpmi_mask, - .coherent_dma_mask = DMA_64BIT_MASK, + .coherent_dma_mask = DMA_BIT_MASK(64), }, }; @@ -181,7 +181,7 @@ static struct platform_device iop13xx_tpmi_2_device = { .resource = iop13xx_tpmi_2_resources, .dev = { .dma_mask = &iop13xx_tpmi_mask, - .coherent_dma_mask = DMA_64BIT_MASK, + .coherent_dma_mask = DMA_BIT_MASK(64), }, }; @@ -192,7 +192,7 @@ static struct platform_device iop13xx_tpmi_3_device = { .resource = iop13xx_tpmi_3_resources, .dev = { .dma_mask = &iop13xx_tpmi_mask, - .coherent_dma_mask = DMA_64BIT_MASK, + .coherent_dma_mask = DMA_BIT_MASK(64), }, }; diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index 3d2fae84651..16dc9ea0839 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -508,7 +508,7 @@ static struct mv_xor_platform_shared_data kirkwood_xor_shared_data = { .dram = &kirkwood_mbus_dram_info, }; -static u64 kirkwood_xor_dmamask = DMA_32BIT_MASK; +static u64 kirkwood_xor_dmamask = DMA_BIT_MASK(32); /***************************************************************************** @@ -559,7 +559,7 @@ static struct platform_device kirkwood_xor00_channel = { .resource = kirkwood_xor00_resources, .dev = { .dma_mask = &kirkwood_xor_dmamask, - .coherent_dma_mask = DMA_64BIT_MASK, + .coherent_dma_mask = DMA_BIT_MASK(64), .platform_data = (void *)&kirkwood_xor00_data, }, }; @@ -585,7 +585,7 @@ static struct platform_device kirkwood_xor01_channel = { .resource = kirkwood_xor01_resources, .dev = { .dma_mask = &kirkwood_xor_dmamask, - .coherent_dma_mask = DMA_64BIT_MASK, + .coherent_dma_mask = DMA_BIT_MASK(64), .platform_data = (void *)&kirkwood_xor01_data, }, }; @@ -657,7 +657,7 @@ static struct platform_device kirkwood_xor10_channel = { .resource = kirkwood_xor10_resources, .dev = { .dma_mask = &kirkwood_xor_dmamask, - .coherent_dma_mask = DMA_64BIT_MASK, + .coherent_dma_mask = DMA_BIT_MASK(64), .platform_data = (void *)&kirkwood_xor10_data, }, }; @@ -683,7 +683,7 @@ static struct platform_device kirkwood_xor11_channel = { .resource = kirkwood_xor11_resources, .dev = { .dma_mask = &kirkwood_xor_dmamask, - .coherent_dma_mask = DMA_64BIT_MASK, + .coherent_dma_mask = DMA_BIT_MASK(64), .platform_data = (void *)&kirkwood_xor11_data, }, }; diff --git a/arch/arm/mach-mx1/Makefile b/arch/arm/mach-mx1/Makefile index 82f1309568e..7f86fe073ec 100644 --- a/arch/arm/mach-mx1/Makefile +++ b/arch/arm/mach-mx1/Makefile @@ -6,6 +6,9 @@ obj-y += generic.o clock.o devices.o +# Support for CMOS sensor interface +obj-$(CONFIG_MX1_VIDEO) += ksym_mx1.o mx1_camera_fiq.o + # Specific board support obj-$(CONFIG_ARCH_MX1ADS) += mx1ads.o obj-$(CONFIG_MACH_SCB9328) += scb9328.o
\ No newline at end of file diff --git a/arch/arm/mach-mx1/devices.c b/arch/arm/mach-mx1/devices.c index 97f42d96d7a..76d1ffb4807 100644 --- a/arch/arm/mach-mx1/devices.c +++ b/arch/arm/mach-mx1/devices.c @@ -44,7 +44,7 @@ static struct resource imx_csi_resources[] = { static u64 imx_csi_dmamask = 0xffffffffUL; struct platform_device imx_csi_device = { - .name = "imx-csi", + .name = "mx1-camera", .id = 0, /* This is used to put cameras on this interface */ .dev = { .dma_mask = &imx_csi_dmamask, diff --git a/arch/arm/mach-mx1/ksym_mx1.c b/arch/arm/mach-mx1/ksym_mx1.c new file mode 100644 index 00000000000..b09ee12a4ff --- /dev/null +++ b/arch/arm/mach-mx1/ksym_mx1.c @@ -0,0 +1,18 @@ +/* + * Exported ksyms of ARCH_MX1 + * + * Copyright (C) 2008, Darius Augulis <augulis.darius@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/platform_device.h> +#include <linux/module.h> + +#include <mach/mx1_camera.h> + +/* IMX camera FIQ handler */ +EXPORT_SYMBOL(mx1_camera_sof_fiq_start); +EXPORT_SYMBOL(mx1_camera_sof_fiq_end); diff --git a/arch/arm/mach-mx1/mx1_camera_fiq.S b/arch/arm/mach-mx1/mx1_camera_fiq.S new file mode 100644 index 00000000000..9c69aa65bf1 --- /dev/null +++ b/arch/arm/mach-mx1/mx1_camera_fiq.S @@ -0,0 +1,35 @@ +/* + * Copyright (C) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt> + * + * Based on linux/arch/arm/lib/floppydma.S + * Copyright (C) 1995, 1996 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/linkage.h> +#include <asm/assembler.h> + + .text + .global mx1_camera_sof_fiq_end + .global mx1_camera_sof_fiq_start +mx1_camera_sof_fiq_start: + @ enable dma + ldr r12, [r9] + orr r12, r12, #0x00000001 + str r12, [r9] + @ unmask DMA interrupt + ldr r12, [r8] + bic r12, r12, r13 + str r12, [r8] + @ disable SOF interrupt + ldr r12, [r10] + bic r12, r12, #0x00010000 + str r12, [r10] + @ clear SOF flag + mov r12, #0x00010000 + str r12, [r11] + @ return from FIQ + subs pc, lr, #4 +mx1_camera_sof_fiq_end: diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c index ca46f4801c3..9957a11533a 100644 --- a/arch/arm/mach-mx3/clock.c +++ b/arch/arm/mach-mx3/clock.c @@ -533,7 +533,7 @@ static struct clk_lookup lookups[] __initdata = { _REGISTER_CLOCK(NULL, "kpp", kpp_clk) _REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk1) _REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usb_clk2) - _REGISTER_CLOCK("mx3-camera.0", "csi", csi_clk) + _REGISTER_CLOCK("mx3-camera.0", NULL, csi_clk) _REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk) _REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk) _REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk) diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index dafe4f71d15..336e51dc612 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -590,27 +590,28 @@ static void omap1_init_ext_clk(struct clk * clk) static int omap1_clk_enable(struct clk *clk) { int ret = 0; + if (clk->usecount++ == 0) { - if (likely(clk->parent)) { + if (clk->parent) { ret = omap1_clk_enable(clk->parent); - - if (unlikely(ret != 0)) { - clk->usecount--; - return ret; - } + if (ret) + goto err; if (clk->flags & CLOCK_NO_IDLE_PARENT) omap1_clk_deny_idle(clk->parent); } ret = clk->ops->enable(clk); - - if (unlikely(ret != 0) && clk->parent) { - omap1_clk_disable(clk->parent); - clk->usecount--; + if (ret) { + if (clk->parent) + omap1_clk_disable(clk->parent); + goto err; } } + return ret; +err: + clk->usecount--; return ret; } diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index 68cc3efae56..6af99ddabdf 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -463,7 +463,7 @@ static struct platform_device orion5x_xor_shared = { .resource = orion5x_xor_shared_resources, }; -static u64 orion5x_xor_dmamask = DMA_32BIT_MASK; +static u64 orion5x_xor_dmamask = DMA_BIT_MASK(32); static struct resource orion5x_xor0_resources[] = { [0] = { @@ -486,7 +486,7 @@ static struct platform_device orion5x_xor0_channel = { .resource = orion5x_xor0_resources, .dev = { .dma_mask = &orion5x_xor_dmamask, - .coherent_dma_mask = DMA_64BIT_MASK, + .coherent_dma_mask = DMA_BIT_MASK(64), .platform_data = (void *)&orion5x_xor0_data, }, }; @@ -512,7 +512,7 @@ static struct platform_device orion5x_xor1_channel = { .resource = orion5x_xor1_resources, .dev = { .dma_mask = &orion5x_xor_dmamask, - .coherent_dma_mask = DMA_64BIT_MASK, + .coherent_dma_mask = DMA_BIT_MASK(64), .platform_data = (void *)&orion5x_xor1_data, }, }; diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 96a2006cb59..3e66d9099ea 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -343,6 +343,15 @@ config ARCH_PXA_PALM bool "PXA based Palm PDAs" select HAVE_PWM +config MACH_PALMTE2 + bool "Palm Tungsten|E2" + default y + depends on ARCH_PXA_PALM + select PXA25x + help + Say Y here if you intend to run this kernel on a Palm Tungsten|E2 + handheld computer. + config MACH_PALMT5 bool "Palm Tungsten|T5" default y diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index c80e1bac494..682dbf4e14b 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -57,6 +57,7 @@ obj-$(CONFIG_MACH_E740) += e740.o obj-$(CONFIG_MACH_E750) += e750.o obj-$(CONFIG_MACH_E400) += e400.o obj-$(CONFIG_MACH_E800) += e800.o +obj-$(CONFIG_MACH_PALMTE2) += palmte2.o obj-$(CONFIG_MACH_PALMT5) += palmt5.o obj-$(CONFIG_MACH_PALMTX) += palmtx.o obj-$(CONFIG_MACH_PALMLD) += palmld.o diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c index 117b5435f8d..b50ef39eabf 100644 --- a/arch/arm/mach-pxa/cm-x2xx.c +++ b/arch/arm/mach-pxa/cm-x2xx.c @@ -121,7 +121,7 @@ static inline void cmx2xx_init_dm9000(void) {} /* UCB1400 touchscreen controller */ #if defined(CONFIG_TOUCHSCREEN_UCB1400) || defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE) static struct platform_device cmx2xx_ts_device = { - .name = "ucb1400_ts", + .name = "ucb1400_core", .id = -1, }; diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c index 10c2eaf9323..7c9c34c19ae 100644 --- a/arch/arm/mach-pxa/colibri-pxa300.c +++ b/arch/arm/mach-pxa/colibri-pxa300.c @@ -15,7 +15,7 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/gpio.h> -#include <net/ax88796.h> +#include <linux/interrupt.h> #include <asm/mach-types.h> #include <asm/sizes.h> @@ -32,12 +32,13 @@ #if defined(CONFIG_AX88796) #define COLIBRI_ETH_IRQ_GPIO mfp_to_gpio(GPIO26_GPIO) + /* * Asix AX88796 Ethernet */ static struct ax_plat_data colibri_asix_platdata = { - .flags = AXFLG_MAC_FROMDEV, - .wordlength = 2 + .flags = 0, /* defined later */ + .wordlength = 2, }; static struct resource colibri_asix_resource[] = { @@ -49,7 +50,7 @@ static struct resource colibri_asix_resource[] = { [1] = { .start = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO), .end = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO), - .flags = IORESOURCE_IRQ + .flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING, } }; @@ -70,8 +71,8 @@ static mfp_cfg_t colibri_pxa300_eth_pin_config[] __initdata = { static void __init colibri_pxa300_init_eth(void) { + colibri_pxa3xx_init_eth(&colibri_asix_platdata); pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa300_eth_pin_config)); - set_irq_type(gpio_to_irq(COLIBRI_ETH_IRQ_GPIO), IRQ_TYPE_EDGE_FALLING); platform_device_register(&asix_device); } #else diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c index 55b74a7a615..a18d37b3c5e 100644 --- a/arch/arm/mach-pxa/colibri-pxa320.c +++ b/arch/arm/mach-pxa/colibri-pxa320.c @@ -15,7 +15,7 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/gpio.h> -#include <net/ax88796.h> +#include <linux/interrupt.h> #include <asm/mach-types.h> #include <asm/sizes.h> @@ -38,8 +38,8 @@ * Asix AX88796 Ethernet */ static struct ax_plat_data colibri_asix_platdata = { - .flags = AXFLG_MAC_FROMDEV, - .wordlength = 2 + .flags = 0, /* defined later */ + .wordlength = 2, }; static struct resource colibri_asix_resource[] = { @@ -51,7 +51,7 @@ static struct resource colibri_asix_resource[] = { [1] = { .start = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO), .end = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO), - .flags = IORESOURCE_IRQ + .flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING, } }; @@ -72,8 +72,8 @@ static mfp_cfg_t colibri_pxa320_eth_pin_config[] __initdata = { static void __init colibri_pxa320_init_eth(void) { + colibri_pxa3xx_init_eth(&colibri_asix_platdata); pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_eth_pin_config)); - set_irq_type(gpio_to_irq(COLIBRI_ETH_IRQ_GPIO), IRQ_TYPE_EDGE_FALLING); platform_device_register(&asix_device); } #else diff --git a/arch/arm/mach-pxa/colibri-pxa3xx.c b/arch/arm/mach-pxa/colibri-pxa3xx.c index 12d0afc54aa..ea34e34f8cd 100644 --- a/arch/arm/mach-pxa/colibri-pxa3xx.c +++ b/arch/arm/mach-pxa/colibri-pxa3xx.c @@ -14,6 +14,7 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/gpio.h> +#include <linux/etherdevice.h> #include <asm/mach-types.h> #include <mach/hardware.h> #include <asm/sizes.h> @@ -28,6 +29,40 @@ #include "generic.h" #include "devices.h" +#if defined(CONFIG_AX88796) +#define ETHER_ADDR_LEN 6 +static u8 ether_mac_addr[ETHER_ADDR_LEN]; + +void __init colibri_pxa3xx_init_eth(struct ax_plat_data *plat_data) +{ + int i; + u64 serial = ((u64) system_serial_high << 32) | system_serial_low; + + /* + * If the bootloader passed in a serial boot tag, which contains a + * valid ethernet MAC, pass it to the interface. Toradex ships the + * modules with their own bootloader which provides a valid MAC + * this way. + */ + + for (i = 0; i < ETHER_ADDR_LEN; i++) { + ether_mac_addr[i] = serial & 0xff; + serial >>= 8; + } + + if (is_valid_ether_addr(ether_mac_addr)) { + plat_data->flags |= AXFLG_MAC_FROMPLATFORM; + plat_data->mac_addr = ether_mac_addr; + printk(KERN_INFO "%s(): taking MAC from serial boot tag\n", + __func__); + } else { + plat_data->flags |= AXFLG_MAC_FROMDEV; + printk(KERN_INFO "%s(): no valid serial boot tag found, " + "taking MAC from device\n", __func__); + } +} +#endif + #if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE) static int mmc_detect_pin; diff --git a/arch/arm/mach-pxa/csb701.c b/arch/arm/mach-pxa/csb701.c index 4a2a2952c37..5a221a49ea4 100644 --- a/arch/arm/mach-pxa/csb701.c +++ b/arch/arm/mach-pxa/csb701.c @@ -5,6 +5,8 @@ #include <linux/input.h> #include <linux/leds.h> +#include <asm/mach-types.h> + static struct gpio_keys_button csb701_buttons[] = { { .code = 0x7, @@ -54,6 +56,9 @@ static struct platform_device *devices[] __initdata = { static int __init csb701_init(void) { + if (!machine_is_csb726()) + return -ENODEV; + return platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/arch/arm/mach-pxa/e740.c b/arch/arm/mach-pxa/e740.c index 07500a04fd8..a36fc17f671 100644 --- a/arch/arm/mach-pxa/e740.c +++ b/arch/arm/mach-pxa/e740.c @@ -29,6 +29,7 @@ #include <mach/udc.h> #include <mach/irda.h> #include <mach/irqs.h> +#include <mach/audio.h> #include "generic.h" #include "eseries.h" @@ -197,6 +198,7 @@ static void __init e740_init(void) eseries_get_tmio_gpios(); platform_add_devices(devices, ARRAY_SIZE(devices)); pxa_set_udc_info(&e7xx_udc_mach_info); + pxa_set_ac97_info(NULL); e7xx_irda_init(); pxa_set_ficp_info(&e7xx_ficp_platform_data); } diff --git a/arch/arm/mach-pxa/e750.c b/arch/arm/mach-pxa/e750.c index 6126c04e02b..1d00110590e 100644 --- a/arch/arm/mach-pxa/e750.c +++ b/arch/arm/mach-pxa/e750.c @@ -28,6 +28,7 @@ #include <mach/udc.h> #include <mach/irda.h> #include <mach/irqs.h> +#include <mach/audio.h> #include "generic.h" #include "eseries.h" @@ -198,6 +199,7 @@ static void __init e750_init(void) eseries_get_tmio_gpios(); platform_add_devices(devices, ARRAY_SIZE(devices)); pxa_set_udc_info(&e7xx_udc_mach_info); + pxa_set_ac97_info(NULL); e7xx_irda_init(); pxa_set_ficp_info(&e7xx_ficp_platform_data); } diff --git a/arch/arm/mach-pxa/e800.c b/arch/arm/mach-pxa/e800.c index 74ab09812a7..9866c7b9e78 100644 --- a/arch/arm/mach-pxa/e800.c +++ b/arch/arm/mach-pxa/e800.c @@ -27,6 +27,7 @@ #include <mach/eseries-gpio.h> #include <mach/udc.h> #include <mach/irqs.h> +#include <mach/audio.h> #include "generic.h" #include "eseries.h" @@ -199,6 +200,7 @@ static void __init e800_init(void) eseries_get_tmio_gpios(); platform_add_devices(devices, ARRAY_SIZE(devices)); pxa_set_udc_info(&e800_udc_mach_info); + pxa_set_ac97_info(NULL); } MACHINE_START(E800, "Toshiba e800") diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index 920dfb8d36d..67611dadb44 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -25,8 +25,10 @@ #include <linux/regulator/machine.h> #include <linux/spi/spi.h> #include <linux/spi/tdo24m.h> +#include <linux/spi/libertas_spi.h> #include <linux/power_supply.h> #include <linux/apm-emulation.h> +#include <linux/delay.h> #include <media/soc_camera.h> @@ -62,6 +64,8 @@ #define GPIO93_CAM_RESET (93) #define GPIO41_ETHIRQ (41) #define EM_X270_ETHIRQ IRQ_GPIO(GPIO41_ETHIRQ) +#define GPIO115_WLAN_PWEN (115) +#define GPIO19_WLAN_STRAP (19) static int mmc_cd; static int nand_rb; @@ -159,8 +163,8 @@ static unsigned long common_pin_config[] = { GPIO57_SSP1_TXD, /* SSP2 */ - GPIO19_SSP2_SCLK, - GPIO14_SSP2_SFRM, + GPIO19_GPIO, /* SSP2 clock is used as GPIO for Libertas pin-strap */ + GPIO14_GPIO, GPIO89_SSP2_TXD, GPIO88_SSP2_RXD, @@ -648,20 +652,86 @@ static struct tdo24m_platform_data em_x270_tdo24m_pdata = { .model = TDO35S, }; +static struct pxa2xx_spi_master em_x270_spi_2_info = { + .num_chipselect = 1, + .enable_dma = 1, +}; + +static struct pxa2xx_spi_chip em_x270_libertas_chip = { + .rx_threshold = 1, + .tx_threshold = 1, + .timeout = 1000, +}; + +static unsigned long em_x270_libertas_pin_config[] = { + /* SSP2 */ + GPIO19_SSP2_SCLK, + GPIO14_GPIO, + GPIO89_SSP2_TXD, + GPIO88_SSP2_RXD, +}; + +static int em_x270_libertas_setup(struct spi_device *spi) +{ + int err = gpio_request(GPIO115_WLAN_PWEN, "WLAN PWEN"); + if (err) + return err; + + gpio_direction_output(GPIO19_WLAN_STRAP, 1); + mdelay(100); + + pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_libertas_pin_config)); + + gpio_direction_output(GPIO115_WLAN_PWEN, 0); + mdelay(100); + gpio_set_value(GPIO115_WLAN_PWEN, 1); + mdelay(100); + + spi->bits_per_word = 16; + spi_setup(spi); + + return 0; +} + +static int em_x270_libertas_teardown(struct spi_device *spi) +{ + gpio_set_value(GPIO115_WLAN_PWEN, 0); + gpio_free(GPIO115_WLAN_PWEN); + + return 0; +} + +struct libertas_spi_platform_data em_x270_libertas_pdata = { + .use_dummy_writes = 1, + .gpio_cs = 14, + .setup = em_x270_libertas_setup, + .teardown = em_x270_libertas_teardown, +}; + static struct spi_board_info em_x270_spi_devices[] __initdata = { { - .modalias = "tdo24m", - .max_speed_hz = 1000000, - .bus_num = 1, - .chip_select = 0, - .controller_data = &em_x270_tdo24m_chip, - .platform_data = &em_x270_tdo24m_pdata, + .modalias = "tdo24m", + .max_speed_hz = 1000000, + .bus_num = 1, + .chip_select = 0, + .controller_data = &em_x270_tdo24m_chip, + .platform_data = &em_x270_tdo24m_pdata, + }, + { + .modalias = "libertas_spi", + .max_speed_hz = 13000000, + .bus_num = 2, + .irq = IRQ_GPIO(116), + .chip_select = 0, + .controller_data = &em_x270_libertas_chip, + .platform_data = &em_x270_libertas_pdata, }, }; static void __init em_x270_init_spi(void) { pxa2xx_set_spi_info(1, &em_x270_spi_info); + pxa2xx_set_spi_info(2, &em_x270_spi_2_info); spi_register_board_info(ARRAY_AND_SIZE(em_x270_spi_devices)); } #else diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h index 3f2a01d6a03..90230c6f992 100644 --- a/arch/arm/mach-pxa/include/mach/colibri.h +++ b/arch/arm/mach-pxa/include/mach/colibri.h @@ -1,5 +1,8 @@ #ifndef _COLIBRI_H_ #define _COLIBRI_H_ + +#include <net/ax88796.h> + /* * common settings for all modules */ @@ -16,6 +19,10 @@ extern void colibri_pxa3xx_init_lcd(int bl_pin); static inline void colibri_pxa3xx_init_lcd(int) {} #endif +#if defined(CONFIG_AX88796) +extern void colibri_pxa3xx_init_eth(struct ax_plat_data *plat_data); +#endif + /* physical memory regions */ #define COLIBRI_SDRAM_BASE 0xa0000000 /* SDRAM region */ diff --git a/arch/arm/mach-pxa/include/mach/magician.h b/arch/arm/mach-pxa/include/mach/magician.h index 82a399f3f9f..20ef37d4a9a 100644 --- a/arch/arm/mach-pxa/include/mach/magician.h +++ b/arch/arm/mach-pxa/include/mach/magician.h @@ -27,7 +27,7 @@ #define GPIO22_MAGICIAN_VIBRA_EN 22 #define GPIO26_MAGICIAN_GSM_POWER 26 #define GPIO27_MAGICIAN_USBC_PUEN 27 -#define GPIO30_MAGICIAN_nCHARGE_EN 30 +#define GPIO30_MAGICIAN_BQ24022_nCHARGE_EN 30 #define GPIO37_MAGICIAN_KEY_HANGUP 37 #define GPIO38_MAGICIAN_KEY_CONTACTS 38 #define GPIO40_MAGICIAN_GSM_OUT2 40 @@ -98,7 +98,7 @@ #define EGPIO_MAGICIAN_UNKNOWN_WAVEDEV_DLL MAGICIAN_EGPIO(2, 2) #define EGPIO_MAGICIAN_FLASH_VPP MAGICIAN_EGPIO(2, 3) #define EGPIO_MAGICIAN_BL_POWER2 MAGICIAN_EGPIO(2, 4) -#define EGPIO_MAGICIAN_CHARGE_EN MAGICIAN_EGPIO(2, 5) +#define EGPIO_MAGICIAN_BQ24022_ISET2 MAGICIAN_EGPIO(2, 5) #define EGPIO_MAGICIAN_GSM_POWER MAGICIAN_EGPIO(2, 7) /* input */ diff --git a/arch/arm/mach-pxa/include/mach/palmld.h b/arch/arm/mach-pxa/include/mach/palmld.h index 7c295a48d78..fb13c82ad6d 100644 --- a/arch/arm/mach-pxa/include/mach/palmld.h +++ b/arch/arm/mach-pxa/include/mach/palmld.h @@ -87,6 +87,7 @@ #define PALMLD_IDE_SIZE 0x00100000 #define PALMLD_PHYS_IO_START 0x40000000 +#define PALMLD_STR_BASE 0xa0200000 /* BATTERY */ #define PALMLD_BAT_MAX_VOLTAGE 4000 /* 4.00V maximum voltage */ diff --git a/arch/arm/mach-pxa/include/mach/palmt5.h b/arch/arm/mach-pxa/include/mach/palmt5.h index 94db2881f04..052bfe788ad 100644 --- a/arch/arm/mach-pxa/include/mach/palmt5.h +++ b/arch/arm/mach-pxa/include/mach/palmt5.h @@ -59,6 +59,7 @@ /* Various addresses */ #define PALMT5_PHYS_RAM_START 0xa0000000 #define PALMT5_PHYS_IO_START 0x40000000 +#define PALMT5_STR_BASE 0xa0200000 /* TOUCHSCREEN */ #define AC97_LINK_FRAME 21 diff --git a/arch/arm/mach-pxa/include/mach/palmte2.h b/arch/arm/mach-pxa/include/mach/palmte2.h new file mode 100644 index 00000000000..12361341f9d --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/palmte2.h @@ -0,0 +1,68 @@ +/* + * GPIOs and interrupts for Palm Tungsten|E2 Handheld Computer + * + * Author: + * Carlos Eduardo Medaglia Dyonisio <cadu@nerdfeliz.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef _INCLUDE_PALMTE2_H_ +#define _INCLUDE_PALMTE2_H_ + +/** HERE ARE GPIOs **/ + +/* GPIOs */ +#define GPIO_NR_PALMTE2_POWER_DETECT 9 +#define GPIO_NR_PALMTE2_HOTSYNC_BUTTON_N 4 +#define GPIO_NR_PALMTE2_EARPHONE_DETECT 15 + +/* SD/MMC */ +#define GPIO_NR_PALMTE2_SD_DETECT_N 10 +#define GPIO_NR_PALMTE2_SD_POWER 55 +#define GPIO_NR_PALMTE2_SD_READONLY 51 + +/* IRDA - disable GPIO connected to SD pin of tranceiver (TFBS4710?) ? */ +#define GPIO_NR_PALMTE2_IR_DISABLE 48 + +/* USB */ +#define GPIO_NR_PALMTE2_USB_DETECT_N 35 +#define GPIO_NR_PALMTE2_USB_PULLUP 53 + +/* LCD/BACKLIGHT */ +#define GPIO_NR_PALMTE2_BL_POWER 56 +#define GPIO_NR_PALMTE2_LCD_POWER 37 + +/* KEYS */ +#define GPIO_NR_PALMTE2_KEY_NOTES 5 +#define GPIO_NR_PALMTE2_KEY_TASKS 7 +#define GPIO_NR_PALMTE2_KEY_CALENDAR 11 +#define GPIO_NR_PALMTE2_KEY_CONTACTS 13 +#define GPIO_NR_PALMTE2_KEY_CENTER 14 +#define GPIO_NR_PALMTE2_KEY_LEFT 19 +#define GPIO_NR_PALMTE2_KEY_RIGHT 20 +#define GPIO_NR_PALMTE2_KEY_DOWN 21 +#define GPIO_NR_PALMTE2_KEY_UP 22 + +/** HERE ARE INIT VALUES **/ + +/* BACKLIGHT */ +#define PALMTE2_MAX_INTENSITY 0xFE +#define PALMTE2_DEFAULT_INTENSITY 0x7E +#define PALMTE2_LIMIT_MASK 0x7F +#define PALMTE2_PRESCALER 0x3F +#define PALMTE2_PERIOD_NS 3500 + +/* BATTERY */ +#define PALMTE2_BAT_MAX_VOLTAGE 4000 /* 4.00v current voltage */ +#define PALMTE2_BAT_MIN_VOLTAGE 3550 /* 3.55v critical voltage */ +#define PALMTE2_BAT_MAX_CURRENT 0 /* unknokn */ +#define PALMTE2_BAT_MIN_CURRENT 0 /* unknown */ +#define PALMTE2_BAT_MAX_CHARGE 1 /* unknown */ +#define PALMTE2_BAT_MIN_CHARGE 1 /* unknown */ +#define PALMTE2_MAX_LIFE_MINS 360 /* on-life in minutes */ + +#endif diff --git a/arch/arm/mach-pxa/include/mach/palmtx.h b/arch/arm/mach-pxa/include/mach/palmtx.h index 1e8bccbda51..9f7d62fb4cb 100644 --- a/arch/arm/mach-pxa/include/mach/palmtx.h +++ b/arch/arm/mach-pxa/include/mach/palmtx.h @@ -78,6 +78,8 @@ #define PALMTX_PHYS_RAM_START 0xa0000000 #define PALMTX_PHYS_IO_START 0x40000000 +#define PALMTX_STR_BASE 0xa0200000 + #define PALMTX_PHYS_FLASH_START PXA_CS0_PHYS /* ChipSelect 0 */ #define PALMTX_PHYS_NAND_START PXA_CS1_PHYS /* ChipSelect 1 */ diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx_spi.h b/arch/arm/mach-pxa/include/mach/pxa2xx_spi.h index 2206cb61a9f..b87cecd9bbd 100644 --- a/arch/arm/mach-pxa/include/mach/pxa2xx_spi.h +++ b/arch/arm/mach-pxa/include/mach/pxa2xx_spi.h @@ -38,6 +38,7 @@ struct pxa2xx_spi_chip { u8 dma_burst_size; u32 timeout; u8 enable_loopback; + int gpio_cs; void (*cs_control)(u32 command); }; diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx_nand.h b/arch/arm/mach-pxa/include/mach/pxa3xx_nand.h index eb35fca9aea..3478eae32d8 100644 --- a/arch/arm/mach-pxa/include/mach/pxa3xx_nand.h +++ b/arch/arm/mach-pxa/include/mach/pxa3xx_nand.h @@ -49,6 +49,9 @@ struct pxa3xx_nand_platform_data { */ int enable_arbiter; + /* allow platform code to keep OBM/bootloader defined NFC config */ + int keep_config; + const struct mtd_partition *parts; unsigned int nr_parts; diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index deeea1c2782..c899bbd94dc 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -25,6 +25,8 @@ #include <linux/mtd/physmap.h> #include <linux/pda_power.h> #include <linux/pwm_backlight.h> +#include <linux/regulator/bq24022.h> +#include <linux/regulator/machine.h> #include <linux/usb/gpio_vbus.h> #include <mach/hardware.h> @@ -552,33 +554,7 @@ static struct platform_device gpio_vbus = { static int power_supply_init(struct device *dev) { - int ret; - - ret = gpio_request(EGPIO_MAGICIAN_CABLE_STATE_AC, "CABLE_STATE_AC"); - if (ret) - goto err_cs_ac; - ret = gpio_request(EGPIO_MAGICIAN_CABLE_STATE_USB, "CABLE_STATE_USB"); - if (ret) - goto err_cs_usb; - ret = gpio_request(EGPIO_MAGICIAN_CHARGE_EN, "CHARGE_EN"); - if (ret) - goto err_chg_en; - ret = gpio_request(GPIO30_MAGICIAN_nCHARGE_EN, "nCHARGE_EN"); - if (!ret) - ret = gpio_direction_output(GPIO30_MAGICIAN_nCHARGE_EN, 0); - if (ret) - goto err_nchg_en; - - return 0; - -err_nchg_en: - gpio_free(EGPIO_MAGICIAN_CHARGE_EN); -err_chg_en: - gpio_free(EGPIO_MAGICIAN_CABLE_STATE_USB); -err_cs_usb: - gpio_free(EGPIO_MAGICIAN_CABLE_STATE_AC); -err_cs_ac: - return ret; + return gpio_request(EGPIO_MAGICIAN_CABLE_STATE_AC, "CABLE_STATE_AC"); } static int magician_is_ac_online(void) @@ -586,22 +562,8 @@ static int magician_is_ac_online(void) return gpio_get_value(EGPIO_MAGICIAN_CABLE_STATE_AC); } -static int magician_is_usb_online(void) -{ - return gpio_get_value(EGPIO_MAGICIAN_CABLE_STATE_USB); -} - -static void magician_set_charge(int flags) -{ - gpio_set_value(GPIO30_MAGICIAN_nCHARGE_EN, !flags); - gpio_set_value(EGPIO_MAGICIAN_CHARGE_EN, flags); -} - static void power_supply_exit(struct device *dev) { - gpio_free(GPIO30_MAGICIAN_nCHARGE_EN); - gpio_free(EGPIO_MAGICIAN_CHARGE_EN); - gpio_free(EGPIO_MAGICIAN_CABLE_STATE_USB); gpio_free(EGPIO_MAGICIAN_CABLE_STATE_AC); } @@ -612,8 +574,6 @@ static char *magician_supplicants[] = { static struct pda_power_pdata power_supply_info = { .init = power_supply_init, .is_ac_online = magician_is_ac_online, - .is_usb_online = magician_is_usb_online, - .set_charge = magician_set_charge, .exit = power_supply_exit, .supplied_to = magician_supplicants, .num_supplicants = ARRAY_SIZE(magician_supplicants), @@ -646,6 +606,43 @@ static struct platform_device power_supply = { .num_resources = ARRAY_SIZE(power_supply_resources), }; +/* + * Battery charger + */ + +static struct regulator_consumer_supply bq24022_consumers[] = { + { + .dev = &gpio_vbus.dev, + .supply = "vbus_draw", + }, + { + .dev = &power_supply.dev, + .supply = "ac_draw", + }, +}; + +static struct regulator_init_data bq24022_init_data = { + .constraints = { + .max_uA = 500000, + .valid_ops_mask = REGULATOR_CHANGE_CURRENT, + }, + .num_consumer_supplies = ARRAY_SIZE(bq24022_consumers), + .consumer_supplies = bq24022_consumers, +}; + +static struct bq24022_mach_info bq24022_info = { + .gpio_nce = GPIO30_MAGICIAN_BQ24022_nCHARGE_EN, + .gpio_iset2 = EGPIO_MAGICIAN_BQ24022_ISET2, + .init_data = &bq24022_init_data, +}; + +static struct platform_device bq24022 = { + .name = "bq24022", + .id = -1, + .dev = { + .platform_data = &bq24022_info, + }, +}; /* * MMC/SD @@ -756,6 +753,7 @@ static struct platform_device *devices[] __initdata = { &egpio, &backlight, &pasic3, + &bq24022, &gpio_vbus, &power_supply, &strataflash, diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index 97c93a7a285..9203b069b35 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -50,6 +50,7 @@ #include <mach/pxa27x-udc.h> #include <mach/i2c.h> #include <mach/camera.h> +#include <mach/audio.h> #include <media/soc_camera.h> #include <mach/mioa701.h> @@ -763,8 +764,6 @@ MIO_PARENT_DEV(mioa701_backlight, "pwm-backlight", &pxa27x_device_pwm0.dev, &mioa701_backlight_data); MIO_SIMPLE_DEV(mioa701_led, "leds-gpio", &gpio_led_info) MIO_SIMPLE_DEV(pxa2xx_pcm, "pxa2xx-pcm", NULL) -MIO_SIMPLE_DEV(pxa2xx_ac97, "pxa2xx-ac97", NULL) -MIO_PARENT_DEV(mio_wm9713_codec, "wm9713-codec", &pxa2xx_ac97.dev, NULL) MIO_SIMPLE_DEV(mioa701_sound, "mioa701-wm9713", NULL) MIO_SIMPLE_DEV(mioa701_board, "mioa701-board", NULL) MIO_SIMPLE_DEV(gpio_vbus, "gpio-vbus", &gpio_vbus_data); @@ -774,8 +773,6 @@ static struct platform_device *devices[] __initdata = { &mioa701_backlight, &mioa701_led, &pxa2xx_pcm, - &pxa2xx_ac97, - &mio_wm9713_codec, &mioa701_sound, &power_dev, &strataflash, @@ -818,6 +815,7 @@ static void __init mioa701_machine_init(void) pxa_set_keypad_info(&mioa701_keypad_info); wm97xx_bat_set_pdata(&mioa701_battery_data); pxa_set_udc_info(&mioa701_udc_info); + pxa_set_ac97_info(NULL); pm_power_off = mioa701_poweroff; arm_pm_restart = mioa701_restart; platform_add_devices(devices, ARRAY_SIZE(devices)); diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c index 8587477a9bb..ecf5910e39d 100644 --- a/arch/arm/mach-pxa/palmld.c +++ b/arch/arm/mach-pxa/palmld.c @@ -24,6 +24,7 @@ #include <linux/gpio.h> #include <linux/wm97xx_batt.h> #include <linux/power_supply.h> +#include <linux/sysdev.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -68,10 +69,10 @@ static unsigned long palmld_pin_config[] __initdata = { GPIO47_FICP_TXD, /* MATRIX KEYPAD */ - GPIO100_KP_MKIN_0, - GPIO101_KP_MKIN_1, - GPIO102_KP_MKIN_2, - GPIO97_KP_MKIN_3, + GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH, + GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH, + GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH, + GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH, GPIO103_KP_MKOUT_0, GPIO104_KP_MKOUT_1, GPIO105_KP_MKOUT_2, @@ -507,6 +508,33 @@ static struct pxafb_mach_info palmld_lcd_screen = { }; /****************************************************************************** + * Power management - standby + ******************************************************************************/ +#ifdef CONFIG_PM +static u32 *addr __initdata; +static u32 resume[3] __initdata = { + 0xe3a00101, /* mov r0, #0x40000000 */ + 0xe380060f, /* orr r0, r0, #0x00f00000 */ + 0xe590f008, /* ldr pc, [r0, #0x08] */ +}; + +static int __init palmld_pm_init(void) +{ + int i; + + /* this is where the bootloader jumps */ + addr = phys_to_virt(PALMLD_STR_BASE); + + for (i = 0; i < 3; i++) + addr[i] = resume[i]; + + return 0; +} + +device_initcall(palmld_pm_init); +#endif + +/****************************************************************************** * Machine init ******************************************************************************/ static struct platform_device *devices[] __initdata = { diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c index 9521c7b3349..0680f1a575a 100644 --- a/arch/arm/mach-pxa/palmt5.c +++ b/arch/arm/mach-pxa/palmt5.c @@ -75,10 +75,10 @@ static unsigned long palmt5_pin_config[] __initdata = { GPIO95_GPIO, /* usb power */ /* MATRIX KEYPAD */ - GPIO100_KP_MKIN_0, - GPIO101_KP_MKIN_1, - GPIO102_KP_MKIN_2, - GPIO97_KP_MKIN_3, + GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH, + GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH, + GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH, + GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH, GPIO103_KP_MKOUT_0, GPIO104_KP_MKOUT_1, GPIO105_KP_MKOUT_2, @@ -450,6 +450,33 @@ static struct pxafb_mach_info palmt5_lcd_screen = { }; /****************************************************************************** + * Power management - standby + ******************************************************************************/ +#ifdef CONFIG_PM +static u32 *addr __initdata; +static u32 resume[3] __initdata = { + 0xe3a00101, /* mov r0, #0x40000000 */ + 0xe380060f, /* orr r0, r0, #0x00f00000 */ + 0xe590f008, /* ldr pc, [r0, #0x08] */ +}; + +static int __init palmt5_pm_init(void) +{ + int i; + + /* this is where the bootloader jumps */ + addr = phys_to_virt(PALMT5_STR_BASE); + + for (i = 0; i < 3; i++) + addr[i] = resume[i]; + + return 0; +} + +device_initcall(palmt5_pm_init); +#endif + +/****************************************************************************** * Machine init ******************************************************************************/ static struct platform_device *devices[] __initdata = { diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c new file mode 100644 index 00000000000..43fcf2e8688 --- /dev/null +++ b/arch/arm/mach-pxa/palmte2.c @@ -0,0 +1,466 @@ +/* + * Hardware definitions for Palm Tungsten|E2 + * + * Author: + * Carlos Eduardo Medaglia Dyonisio <cadu@nerdfeliz.com> + * + * Rewrite for mainline: + * Marek Vasut <marek.vasut@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * (find more info at www.hackndev.com) + * + */ + +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/irq.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> +#include <linux/pda_power.h> +#include <linux/pwm_backlight.h> +#include <linux/gpio.h> +#include <linux/wm97xx_batt.h> +#include <linux/power_supply.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <mach/audio.h> +#include <mach/palmte2.h> +#include <mach/mmc.h> +#include <mach/pxafb.h> +#include <mach/mfp-pxa25x.h> +#include <mach/irda.h> +#include <mach/udc.h> + +#include "generic.h" +#include "devices.h" + +/****************************************************************************** + * Pin configuration + ******************************************************************************/ +static unsigned long palmte2_pin_config[] __initdata = { + /* MMC */ + GPIO6_MMC_CLK, + GPIO8_MMC_CS0, + GPIO10_GPIO, /* SD detect */ + GPIO55_GPIO, /* SD power */ + GPIO51_GPIO, /* SD r/o switch */ + + /* AC97 */ + GPIO28_AC97_BITCLK, + GPIO29_AC97_SDATA_IN_0, + GPIO30_AC97_SDATA_OUT, + GPIO31_AC97_SYNC, + + /* PWM */ + GPIO16_PWM0_OUT, + + /* USB */ + GPIO15_GPIO, /* usb detect */ + GPIO53_GPIO, /* usb power */ + + /* IrDA */ + GPIO48_GPIO, /* ir disable */ + GPIO46_FICP_RXD, + GPIO47_FICP_TXD, + + /* LCD */ + GPIO58_LCD_LDD_0, + GPIO59_LCD_LDD_1, + GPIO60_LCD_LDD_2, + GPIO61_LCD_LDD_3, + GPIO62_LCD_LDD_4, + GPIO63_LCD_LDD_5, + GPIO64_LCD_LDD_6, + GPIO65_LCD_LDD_7, + GPIO66_LCD_LDD_8, + GPIO67_LCD_LDD_9, + GPIO68_LCD_LDD_10, + GPIO69_LCD_LDD_11, + GPIO70_LCD_LDD_12, + GPIO71_LCD_LDD_13, + GPIO72_LCD_LDD_14, + GPIO73_LCD_LDD_15, + GPIO74_LCD_FCLK, + GPIO75_LCD_LCLK, + GPIO76_LCD_PCLK, + GPIO77_LCD_BIAS, + + /* GPIO KEYS */ + GPIO5_GPIO, /* notes */ + GPIO7_GPIO, /* tasks */ + GPIO11_GPIO, /* calendar */ + GPIO13_GPIO, /* contacts */ + GPIO14_GPIO, /* center */ + GPIO19_GPIO, /* left */ + GPIO20_GPIO, /* right */ + GPIO21_GPIO, /* down */ + GPIO22_GPIO, /* up */ + + /* MISC */ + GPIO1_RST, /* reset */ + GPIO4_GPIO, /* Hotsync button */ + GPIO9_GPIO, /* power detect */ + GPIO37_GPIO, /* LCD power */ + GPIO56_GPIO, /* Backlight power */ +}; + +/****************************************************************************** + * SD/MMC card controller + ******************************************************************************/ +static int palmte2_mci_init(struct device *dev, + irq_handler_t palmte2_detect_int, void *data) +{ + int err = 0; + + /* Setup an interrupt for detecting card insert/remove events */ + err = gpio_request(GPIO_NR_PALMTE2_SD_DETECT_N, "SD IRQ"); + if (err) + goto err; + err = gpio_direction_input(GPIO_NR_PALMTE2_SD_DETECT_N); + if (err) + goto err2; + err = request_irq(gpio_to_irq(GPIO_NR_PALMTE2_SD_DETECT_N), + palmte2_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM | + IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, + "SD/MMC card detect", data); + if (err) { + printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n", + __func__); + goto err2; + } + + err = gpio_request(GPIO_NR_PALMTE2_SD_POWER, "SD_POWER"); + if (err) + goto err3; + err = gpio_direction_output(GPIO_NR_PALMTE2_SD_POWER, 0); + if (err) + goto err4; + + err = gpio_request(GPIO_NR_PALMTE2_SD_READONLY, "SD_READONLY"); + if (err) + goto err4; + err = gpio_direction_input(GPIO_NR_PALMTE2_SD_READONLY); + if (err) + goto err5; + + printk(KERN_DEBUG "%s: irq registered\n", __func__); + + return 0; + +err5: + gpio_free(GPIO_NR_PALMTE2_SD_READONLY); +err4: + gpio_free(GPIO_NR_PALMTE2_SD_POWER); +err3: + free_irq(gpio_to_irq(GPIO_NR_PALMTE2_SD_DETECT_N), data); +err2: + gpio_free(GPIO_NR_PALMTE2_SD_DETECT_N); +err: + return err; +} + +static void palmte2_mci_exit(struct device *dev, void *data) +{ + gpio_free(GPIO_NR_PALMTE2_SD_READONLY); + gpio_free(GPIO_NR_PALMTE2_SD_POWER); + free_irq(gpio_to_irq(GPIO_NR_PALMTE2_SD_DETECT_N), data); + gpio_free(GPIO_NR_PALMTE2_SD_DETECT_N); +} + +static void palmte2_mci_power(struct device *dev, unsigned int vdd) +{ + struct pxamci_platform_data *p_d = dev->platform_data; + gpio_set_value(GPIO_NR_PALMTE2_SD_POWER, p_d->ocr_mask & (1 << vdd)); +} + +static int palmte2_mci_get_ro(struct device *dev) +{ + return gpio_get_value(GPIO_NR_PALMTE2_SD_READONLY); +} + +static struct pxamci_platform_data palmte2_mci_platform_data = { + .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, + .setpower = palmte2_mci_power, + .get_ro = palmte2_mci_get_ro, + .init = palmte2_mci_init, + .exit = palmte2_mci_exit, +}; + +/****************************************************************************** + * GPIO keys + ******************************************************************************/ +static struct gpio_keys_button palmte2_pxa_buttons[] = { + {KEY_F1, GPIO_NR_PALMTE2_KEY_CONTACTS, 1, "Contacts" }, + {KEY_F2, GPIO_NR_PALMTE2_KEY_CALENDAR, 1, "Calendar" }, + {KEY_F3, GPIO_NR_PALMTE2_KEY_TASKS, 1, "Tasks" }, + {KEY_F4, GPIO_NR_PALMTE2_KEY_NOTES, 1, "Notes" }, + {KEY_ENTER, GPIO_NR_PALMTE2_KEY_CENTER, 1, "Center" }, + {KEY_LEFT, GPIO_NR_PALMTE2_KEY_LEFT, 1, "Left" }, + {KEY_RIGHT, GPIO_NR_PALMTE2_KEY_RIGHT, 1, "Right" }, + {KEY_DOWN, GPIO_NR_PALMTE2_KEY_DOWN, 1, "Down" }, + {KEY_UP, GPIO_NR_PALMTE2_KEY_UP, 1, "Up" }, +}; + +static struct gpio_keys_platform_data palmte2_pxa_keys_data = { + .buttons = palmte2_pxa_buttons, + .nbuttons = ARRAY_SIZE(palmte2_pxa_buttons), +}; + +static struct platform_device palmte2_pxa_keys = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &palmte2_pxa_keys_data, + }, +}; + +/****************************************************************************** + * Backlight + ******************************************************************************/ +static int palmte2_backlight_init(struct device *dev) +{ + int ret; + + ret = gpio_request(GPIO_NR_PALMTE2_BL_POWER, "BL POWER"); + if (ret) + goto err; + ret = gpio_direction_output(GPIO_NR_PALMTE2_BL_POWER, 0); + if (ret) + goto err2; + ret = gpio_request(GPIO_NR_PALMTE2_LCD_POWER, "LCD POWER"); + if (ret) + goto err2; + ret = gpio_direction_output(GPIO_NR_PALMTE2_LCD_POWER, 0); + if (ret) + goto err3; + + return 0; +err3: + gpio_free(GPIO_NR_PALMTE2_LCD_POWER); +err2: + gpio_free(GPIO_NR_PALMTE2_BL_POWER); +err: + return ret; +} + +static int palmte2_backlight_notify(int brightness) +{ + gpio_set_value(GPIO_NR_PALMTE2_BL_POWER, brightness); + gpio_set_value(GPIO_NR_PALMTE2_LCD_POWER, brightness); + return brightness; +} + +static void palmte2_backlight_exit(struct device *dev) +{ + gpio_free(GPIO_NR_PALMTE2_BL_POWER); + gpio_free(GPIO_NR_PALMTE2_LCD_POWER); +} + +static struct platform_pwm_backlight_data palmte2_backlight_data = { + .pwm_id = 0, + .max_brightness = PALMTE2_MAX_INTENSITY, + .dft_brightness = PALMTE2_MAX_INTENSITY, + .pwm_period_ns = PALMTE2_PERIOD_NS, + .init = palmte2_backlight_init, + .notify = palmte2_backlight_notify, + .exit = palmte2_backlight_exit, +}; + +static struct platform_device palmte2_backlight = { + .name = "pwm-backlight", + .dev = { + .parent = &pxa25x_device_pwm0.dev, + .platform_data = &palmte2_backlight_data, + }, +}; + +/****************************************************************************** + * IrDA + ******************************************************************************/ +static int palmte2_irda_startup(struct device *dev) +{ + int err; + err = gpio_request(GPIO_NR_PALMTE2_IR_DISABLE, "IR DISABLE"); + if (err) + goto err; + err = gpio_direction_output(GPIO_NR_PALMTE2_IR_DISABLE, 1); + if (err) + gpio_free(GPIO_NR_PALMTE2_IR_DISABLE); +err: + return err; +} + +static void palmte2_irda_shutdown(struct device *dev) +{ + gpio_free(GPIO_NR_PALMTE2_IR_DISABLE); +} + +static void palmte2_irda_transceiver_mode(struct device *dev, int mode) +{ + gpio_set_value(GPIO_NR_PALMTE2_IR_DISABLE, mode & IR_OFF); + pxa2xx_transceiver_mode(dev, mode); +} + +static struct pxaficp_platform_data palmte2_ficp_platform_data = { + .startup = palmte2_irda_startup, + .shutdown = palmte2_irda_shutdown, + .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF, + .transceiver_mode = palmte2_irda_transceiver_mode, +}; + +/****************************************************************************** + * UDC + ******************************************************************************/ +static struct pxa2xx_udc_mach_info palmte2_udc_info __initdata = { + .gpio_vbus = GPIO_NR_PALMTE2_USB_DETECT_N, + .gpio_vbus_inverted = 1, + .gpio_pullup = GPIO_NR_PALMTE2_USB_PULLUP, + .gpio_pullup_inverted = 0, +}; + +/****************************************************************************** + * Power supply + ******************************************************************************/ +static int power_supply_init(struct device *dev) +{ + int ret; + + ret = gpio_request(GPIO_NR_PALMTE2_POWER_DETECT, "CABLE_STATE_AC"); + if (ret) + goto err1; + ret = gpio_direction_input(GPIO_NR_PALMTE2_POWER_DETECT); + if (ret) + goto err2; + + return 0; + +err2: + gpio_free(GPIO_NR_PALMTE2_POWER_DETECT); +err1: + return ret; +} + +static int palmte2_is_ac_online(void) +{ + return gpio_get_value(GPIO_NR_PALMTE2_POWER_DETECT); +} + +static void power_supply_exit(struct device *dev) +{ + gpio_free(GPIO_NR_PALMTE2_POWER_DETECT); +} + +static char *palmte2_supplicants[] = { + "main-battery", +}; + +static struct pda_power_pdata power_supply_info = { + .init = power_supply_init, + .is_ac_online = palmte2_is_ac_online, + .exit = power_supply_exit, + .supplied_to = palmte2_supplicants, + .num_supplicants = ARRAY_SIZE(palmte2_supplicants), +}; + +static struct platform_device power_supply = { + .name = "pda-power", + .id = -1, + .dev = { + .platform_data = &power_supply_info, + }, +}; + +/****************************************************************************** + * WM97xx battery + ******************************************************************************/ +static struct wm97xx_batt_info wm97xx_batt_pdata = { + .batt_aux = WM97XX_AUX_ID3, + .temp_aux = WM97XX_AUX_ID2, + .charge_gpio = -1, + .max_voltage = PALMTE2_BAT_MAX_VOLTAGE, + .min_voltage = PALMTE2_BAT_MIN_VOLTAGE, + .batt_mult = 1000, + .batt_div = 414, + .temp_mult = 1, + .temp_div = 1, + .batt_tech = POWER_SUPPLY_TECHNOLOGY_LIPO, + .batt_name = "main-batt", +}; + +/****************************************************************************** + * Framebuffer + ******************************************************************************/ +static struct pxafb_mode_info palmte2_lcd_modes[] = { +{ + .pixclock = 77757, + .xres = 320, + .yres = 320, + .bpp = 16, + + .left_margin = 28, + .right_margin = 7, + .upper_margin = 7, + .lower_margin = 5, + + .hsync_len = 4, + .vsync_len = 1, +}, +}; + +static struct pxafb_mach_info palmte2_lcd_screen = { + .modes = palmte2_lcd_modes, + .num_modes = ARRAY_SIZE(palmte2_lcd_modes), + .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL, +}; + +/****************************************************************************** + * Machine init + ******************************************************************************/ +static struct platform_device *devices[] __initdata = { +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) + &palmte2_pxa_keys, +#endif + &palmte2_backlight, + &power_supply, +}; + +/* setup udc GPIOs initial state */ +static void __init palmte2_udc_init(void) +{ + if (!gpio_request(GPIO_NR_PALMTE2_USB_PULLUP, "UDC Vbus")) { + gpio_direction_output(GPIO_NR_PALMTE2_USB_PULLUP, 1); + gpio_free(GPIO_NR_PALMTE2_USB_PULLUP); + } +} + +static void __init palmte2_init(void) +{ + pxa2xx_mfp_config(ARRAY_AND_SIZE(palmte2_pin_config)); + + set_pxa_fb_info(&palmte2_lcd_screen); + pxa_set_mci_info(&palmte2_mci_platform_data); + palmte2_udc_init(); + pxa_set_udc_info(&palmte2_udc_info); + pxa_set_ac97_info(NULL); + pxa_set_ficp_info(&palmte2_ficp_platform_data); + wm97xx_bat_set_pdata(&wm97xx_batt_pdata); + + platform_add_devices(devices, ARRAY_SIZE(devices)); +} + +MACHINE_START(PALMTE2, "Palm Tungsten|E2") + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .boot_params = 0xa0000100, + .map_io = pxa_map_io, + .init_irq = pxa25x_init_irq, + .timer = &pxa_timer, + .init_machine = palmte2_init +MACHINE_END diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c index b490c092461..59d0c1cba55 100644 --- a/arch/arm/mach-pxa/palmtx.c +++ b/arch/arm/mach-pxa/palmtx.c @@ -93,10 +93,10 @@ static unsigned long palmtx_pin_config[] __initdata = { GPIO116_GPIO, /* wifi ready */ /* MATRIX KEYPAD */ - GPIO100_KP_MKIN_0, - GPIO101_KP_MKIN_1, - GPIO102_KP_MKIN_2, - GPIO97_KP_MKIN_3, + GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH, + GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH, + GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH, + GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH, GPIO103_KP_MKOUT_0, GPIO104_KP_MKOUT_1, GPIO105_KP_MKOUT_2, @@ -459,6 +459,33 @@ static struct pxafb_mach_info palmtx_lcd_screen = { }; /****************************************************************************** + * Power management - standby + ******************************************************************************/ +#ifdef CONFIG_PM +static u32 *addr __initdata; +static u32 resume[3] __initdata = { + 0xe3a00101, /* mov r0, #0x40000000 */ + 0xe380060f, /* orr r0, r0, #0x00f00000 */ + 0xe590f008, /* ldr pc, [r0, #0x08] */ +}; + +static int __init palmtx_pm_init(void) +{ + int i; + + /* this is where the bootloader jumps */ + addr = phys_to_virt(PALMTX_STR_BASE); + + for (i = 0; i < 3; i++) + addr[i] = resume[i]; + + return 0; +} + +device_initcall(palmtx_pm_init); +#endif + +/****************************************************************************** * Machine init ******************************************************************************/ static struct platform_device *devices[] __initdata = { diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index 6e8ade6ae33..afac5b6d3d7 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -45,6 +45,7 @@ #include <mach/udc.h> #include <mach/tosa_bt.h> #include <mach/pxa2xx_spi.h> +#include <mach/audio.h> #include <asm/mach/arch.h> #include <mach/tosa.h> @@ -914,6 +915,7 @@ static void __init tosa_init(void) pxa_set_udc_info(&udc_info); pxa_set_ficp_info(&tosa_ficp_platform_data); pxa_set_i2c_info(NULL); + pxa_set_ac97_info(NULL); platform_scoop_config = &tosa_pcmcia_config; pxa2xx_set_spi_info(2, &pxa_ssp_master_info); diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index 01bd76725b9..4389c160f7d 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -409,8 +409,7 @@ static struct platform_device bast_sio = { static struct s3c2410_platform_i2c __initdata bast_i2c_info = { .flags = 0, .slave_addr = 0x10, - .bus_freq = 100*1000, - .max_freq = 130*1000, + .frequency = 100*1000, }; /* Asix AX88796 10/100 ethernet controller */ diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c index 05a5e877b49..2b83f870771 100644 --- a/arch/arm/mach-s3c2410/mach-n30.c +++ b/arch/arm/mach-s3c2410/mach-n30.c @@ -340,8 +340,7 @@ static struct platform_device *n35_devices[] __initdata = { static struct s3c2410_platform_i2c n30_i2ccfg = { .flags = 0, .slave_addr = 0x10, - .bus_freq = 10*1000, - .max_freq = 10*1000, + .frequency = 10*1000, }; /* Lots of hardcoded stuff, but it sets up the hardware in a useful diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c index 72c266aee14..332bd3263ea 100644 --- a/arch/arm/mach-s3c2412/mach-jive.c +++ b/arch/arm/mach-s3c2412/mach-jive.c @@ -453,8 +453,7 @@ static struct spi_board_info __initdata jive_spi_devs[] = { /* I2C bus and device configuration. */ static struct s3c2410_platform_i2c jive_i2c_cfg __initdata = { - .max_freq = 80 * 1000, - .bus_freq = 50 * 1000, + .frequency = 80 * 1000, .flags = S3C_IICFLG_FILTER, .sda_delay = 2, }; diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index b438fc4fb77..e6344ece00c 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -828,6 +828,17 @@ void __init reserve_node_zero(pg_data_t *pgdat) BOOTMEM_DEFAULT); } + if (machine_is_palmld() || machine_is_palmtx()) { + reserve_bootmem_node(pgdat, 0xa0000000, 0x1000, + BOOTMEM_EXCLUSIVE); + reserve_bootmem_node(pgdat, 0xa0200000, 0x1000, + BOOTMEM_EXCLUSIVE); + } + + if (machine_is_palmt5()) + reserve_bootmem_node(pgdat, 0xa0200000, 0x1000, + BOOTMEM_EXCLUSIVE); + #ifdef CONFIG_SA1111 /* * Because of the SA1111 DMA bug, we want to preserve our diff --git a/arch/arm/plat-iop/adma.c b/arch/arm/plat-iop/adma.c index f7242082161..3c127aabe21 100644 --- a/arch/arm/plat-iop/adma.c +++ b/arch/arm/plat-iop/adma.c @@ -119,7 +119,7 @@ static struct resource iop3xx_aau_resources[] = { } }; -static u64 iop3xx_adma_dmamask = DMA_32BIT_MASK; +static u64 iop3xx_adma_dmamask = DMA_BIT_MASK(32); static struct iop_adma_platform_data iop3xx_dma_0_data = { .hw_id = DMA0_ID, @@ -143,7 +143,7 @@ struct platform_device iop3xx_dma_0_channel = { .resource = iop3xx_dma_0_resources, .dev = { .dma_mask = &iop3xx_adma_dmamask, - .coherent_dma_mask = DMA_64BIT_MASK, + .coherent_dma_mask = DMA_BIT_MASK(64), .platform_data = (void *) &iop3xx_dma_0_data, }, }; @@ -155,7 +155,7 @@ struct platform_device iop3xx_dma_1_channel = { .resource = iop3xx_dma_1_resources, .dev = { .dma_mask = &iop3xx_adma_dmamask, - .coherent_dma_mask = DMA_64BIT_MASK, + .coherent_dma_mask = DMA_BIT_MASK(64), .platform_data = (void *) &iop3xx_dma_1_data, }, }; @@ -167,7 +167,7 @@ struct platform_device iop3xx_aau_channel = { .resource = iop3xx_aau_resources, .dev = { .dma_mask = &iop3xx_adma_dmamask, - .coherent_dma_mask = DMA_64BIT_MASK, + .coherent_dma_mask = DMA_BIT_MASK(64), .platform_data = (void *) &iop3xx_aau_data, }, }; diff --git a/arch/arm/plat-mxc/include/mach/i2c.h b/arch/arm/plat-mxc/include/mach/i2c.h new file mode 100644 index 00000000000..4a5dc5c6d8e --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/i2c.h @@ -0,0 +1,25 @@ +/* + * i2c.h - i.MX I2C driver header file + * + * Copyright (c) 2008, Darius Augulis <augulis.darius@gmail.com> + * + * This file is released under the GPLv2 + */ + +#ifndef __ASM_ARCH_I2C_H_ +#define __ASM_ARCH_I2C_H_ + +/** + * struct imxi2c_platform_data - structure of platform data for MXC I2C driver + * @init: Initialise gpio's and other board specific things + * @exit: Free everything initialised by @init + * @bitrate: Bus speed measured in Hz + * + **/ +struct imxi2c_platform_data { + int (*init)(struct device *dev); + void (*exit)(struct device *dev); + int bitrate; +}; + +#endif /* __ASM_ARCH_I2C_H_ */ diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h index e0783e61958..eca37d09f3f 100644 --- a/arch/arm/plat-mxc/include/mach/memory.h +++ b/arch/arm/plat-mxc/include/mach/memory.h @@ -24,4 +24,12 @@ #define PHYS_OFFSET UL(0x80000000) #endif +#if defined(CONFIG_MX1_VIDEO) +/* + * Increase size of DMA-consistent memory region. + * This is required for i.MX camera driver to capture at least four VGA frames. + */ +#define CONSISTENT_DMA_SIZE SZ_4M +#endif /* CONFIG_MX1_VIDEO */ + #endif /* __ASM_ARCH_MXC_MEMORY_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mx1_camera.h b/arch/arm/plat-mxc/include/mach/mx1_camera.h new file mode 100644 index 00000000000..4fd6c70314b --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/mx1_camera.h @@ -0,0 +1,35 @@ +/* + * mx1_camera.h - i.MX1/i.MXL camera driver header file + * + * Copyright (c) 2008, Paulius Zaleckas <paulius.zaleckas@teltonika.lt> + * Copyright (C) 2009, Darius Augulis <augulis.darius@gmail.com> + * + * Based on PXA camera.h file: + * Copyright (C) 2003, Intel Corporation + * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_CAMERA_H_ +#define __ASM_ARCH_CAMERA_H_ + +#define MX1_CAMERA_DATA_HIGH 1 +#define MX1_CAMERA_PCLK_RISING 2 +#define MX1_CAMERA_VSYNC_HIGH 4 + +extern unsigned char mx1_camera_sof_fiq_start, mx1_camera_sof_fiq_end; + +/** + * struct mx1_camera_pdata - i.MX1/i.MXL camera platform data + * @mclk_10khz: master clock frequency in 10kHz units + * @flags: MX1 camera platform flags + */ +struct mx1_camera_pdata { + unsigned long mclk_10khz; + unsigned long flags; +}; + +#endif /* __ASM_ARCH_CAMERA_H_ */ diff --git a/arch/arm/plat-s3c/dev-i2c0.c b/arch/arm/plat-s3c/dev-i2c0.c index fe327074037..428372868fb 100644 --- a/arch/arm/plat-s3c/dev-i2c0.c +++ b/arch/arm/plat-s3c/dev-i2c0.c @@ -1,6 +1,6 @@ /* linux/arch/arm/plat-s3c/dev-i2c0.c * - * Copyright 2008 Simtec Electronics + * Copyright 2008,2009 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * http://armlinux.simtec.co.uk/ * @@ -50,9 +50,8 @@ struct platform_device s3c_device_i2c0 = { static struct s3c2410_platform_i2c default_i2c_data0 __initdata = { .flags = 0, .slave_addr = 0x10, - .bus_freq = 100*1000, - .max_freq = 400*1000, - .sda_delay = S3C2410_IICLC_SDA_DELAY5 | S3C2410_IICLC_FILTER_ON, + .frequency = 100*1000, + .sda_delay = 100, }; void __init s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *pd) diff --git a/arch/arm/plat-s3c/dev-i2c1.c b/arch/arm/plat-s3c/dev-i2c1.c index 2387fbf57af..8349c462788 100644 --- a/arch/arm/plat-s3c/dev-i2c1.c +++ b/arch/arm/plat-s3c/dev-i2c1.c @@ -1,6 +1,6 @@ /* linux/arch/arm/plat-s3c/dev-i2c1.c * - * Copyright 2008 Simtec Electronics + * Copyright 2008,2009 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * http://armlinux.simtec.co.uk/ * @@ -47,9 +47,8 @@ static struct s3c2410_platform_i2c default_i2c_data1 __initdata = { .flags = 0, .bus_num = 1, .slave_addr = 0x10, - .bus_freq = 100*1000, - .max_freq = 400*1000, - .sda_delay = S3C2410_IICLC_SDA_DELAY5 | S3C2410_IICLC_FILTER_ON, + .frequency = 100*1000, + .sda_delay = 100, }; void __init s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *pd) diff --git a/arch/arm/plat-s3c/include/plat/iic.h b/arch/arm/plat-s3c/include/plat/iic.h index dc1dfcb9bc6..67450f11574 100644 --- a/arch/arm/plat-s3c/include/plat/iic.h +++ b/arch/arm/plat-s3c/include/plat/iic.h @@ -1,9 +1,9 @@ -/* arch/arm/mach-s3c2410/include/mach/iic.h +/* arch/arm/plat-s3c/include/plat/iic.h * - * Copyright (c) 2004 Simtec Electronics + * Copyright 2004,2009 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * - * S3C2410 - I2C Controller platfrom_device info + * S3C - I2C Controller platform_device info * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -15,19 +15,24 @@ #define S3C_IICFLG_FILTER (1<<0) /* enable s3c2440 filter */ -/* Notes: - * 1) All frequencies are expressed in Hz - * 2) A value of zero is `do not care` -*/ - +/** + * struct s3c2410_platform_i2c - Platform data for s3c I2C. + * @bus_num: The bus number to use (if possible). + * @flags: Any flags for the I2C bus (E.g. S3C_IICFLK_FILTER). + * @slave_addr: The I2C address for the slave device (if enabled). + * @frequency: The desired frequency in Hz of the bus. This is + * guaranteed to not be exceeded. If the caller does + * not care, use zero and the driver will select a + * useful default. + * @sda_delay: The delay (in ns) applied to SDA edges. + * @cfg_gpio: A callback to configure the pins for I2C operation. + */ struct s3c2410_platform_i2c { - int bus_num; /* bus number to use */ + int bus_num; unsigned int flags; - unsigned int slave_addr; /* slave address for controller */ - unsigned long bus_freq; /* standard bus frequency */ - unsigned long max_freq; /* max frequency for the bus */ - unsigned long min_freq; /* min frequency for the bus */ - unsigned int sda_delay; /* pclks (s3c2440 only) */ + unsigned int slave_addr; + unsigned long frequency; + unsigned int sda_delay; void (*cfg_gpio)(struct platform_device *dev); }; diff --git a/arch/avr32/boards/hammerhead/flash.c b/arch/avr32/boards/hammerhead/flash.c index 559bbcb03f9..776c3cb9b6e 100644 --- a/arch/avr32/boards/hammerhead/flash.c +++ b/arch/avr32/boards/hammerhead/flash.c @@ -280,13 +280,13 @@ static struct resource hh_fpga0_resource[] = { }, }; -static u64 hh_fpga0_dma_mask = DMA_32BIT_MASK; +static u64 hh_fpga0_dma_mask = DMA_BIT_MASK(32); static struct platform_device hh_fpga0_device = { .name = "hh_fpga", .id = 0, .dev = { .dma_mask = &hh_fpga0_dma_mask, - .coherent_dma_mask = DMA_32BIT_MASK, + .coherent_dma_mask = DMA_BIT_MASK(32), }, .resource = hh_fpga0_resource, .num_resources = ARRAY_SIZE(hh_fpga0_resource), diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c index 7cc65379832..eb9d4dc2e86 100644 --- a/arch/avr32/mach-at32ap/at32ap700x.c +++ b/arch/avr32/mach-at32ap/at32ap700x.c @@ -60,26 +60,26 @@ * don't ... tc, smc, pio, rtc, watchdog, pwm, ps2, and more. */ #define DEFINE_DEV(_name, _id) \ -static u64 _name##_id##_dma_mask = DMA_32BIT_MASK; \ +static u64 _name##_id##_dma_mask = DMA_BIT_MASK(32); \ static struct platform_device _name##_id##_device = { \ .name = #_name, \ .id = _id, \ .dev = { \ .dma_mask = &_name##_id##_dma_mask, \ - .coherent_dma_mask = DMA_32BIT_MASK, \ + .coherent_dma_mask = DMA_BIT_MASK(32), \ }, \ .resource = _name##_id##_resource, \ .num_resources = ARRAY_SIZE(_name##_id##_resource), \ } #define DEFINE_DEV_DATA(_name, _id) \ -static u64 _name##_id##_dma_mask = DMA_32BIT_MASK; \ +static u64 _name##_id##_dma_mask = DMA_BIT_MASK(32); \ static struct platform_device _name##_id##_device = { \ .name = #_name, \ .id = _id, \ .dev = { \ .dma_mask = &_name##_id##_dma_mask, \ .platform_data = &_name##_id##_data, \ - .coherent_dma_mask = DMA_32BIT_MASK, \ + .coherent_dma_mask = DMA_BIT_MASK(32), \ }, \ .resource = _name##_id##_resource, \ .num_resources = ARRAY_SIZE(_name##_id##_resource), \ diff --git a/arch/blackfin/include/asm/bfin5xx_spi.h b/arch/blackfin/include/asm/bfin5xx_spi.h index 0292d58f936..aaeb4df10d5 100644 --- a/arch/blackfin/include/asm/bfin5xx_spi.h +++ b/arch/blackfin/include/asm/bfin5xx_spi.h @@ -11,6 +11,8 @@ #ifndef _SPI_CHANNEL_H_ #define _SPI_CHANNEL_H_ +#define MIN_SPI_BAUD_VAL 2 + #define SPI_READ 0 #define SPI_WRITE 1 @@ -122,6 +124,9 @@ struct bfin5xx_spi_chip { u8 bits_per_word; u8 cs_change_per_word; u16 cs_chg_udelay; /* Some devices require 16-bit delays */ + u32 cs_gpio; + /* Value to send if no TX value is supplied, usually 0x0 or 0xFFFF */ + u16 idle_tx_val; }; #endif /* _SPI_CHANNEL_H_ */ diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c index f49427293ca..e040e03335e 100644 --- a/arch/blackfin/kernel/process.c +++ b/arch/blackfin/kernel/process.c @@ -337,7 +337,7 @@ int _access_ok(unsigned long addr, unsigned long size) if (addr >= memory_mtd_end && (addr + size) <= physical_mem_end) return 1; -#ifdef CONFIG_ROMFS_MTD_FS +#ifdef CONFIG_ROMFS_ON_MTD /* For XIP, allow user space to use pointers within the ROMFS. */ if (addr >= memory_mtd_start && (addr + size) <= memory_mtd_end) return 1; diff --git a/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h index e21c1c3e4ec..0fb2ce5d840 100644 --- a/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h @@ -53,9 +53,9 @@ #define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) #define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) -#define UART_GET_CTS(x) gpio_get_value(x->cts_pin) -#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1) -#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0) +#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin)) +#define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1) +#define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0) #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) #define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0) @@ -87,6 +87,7 @@ struct bfin_serial_port { struct uart_port port; unsigned int old_status; + int status_irq; unsigned int lsr; #ifdef CONFIG_SERIAL_BFIN_DMA int tx_done; @@ -125,6 +126,7 @@ static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart) struct bfin_serial_res { unsigned long uart_base_addr; int uart_irq; + int uart_status_irq; #ifdef CONFIG_SERIAL_BFIN_DMA unsigned int uart_tx_dma_channel; unsigned int uart_rx_dma_channel; @@ -140,6 +142,7 @@ struct bfin_serial_res bfin_serial_resource[] = { { 0xFFC00400, IRQ_UART0_RX, + IRQ_UART0_ERROR, #ifdef CONFIG_SERIAL_BFIN_DMA CH_UART0_TX, CH_UART0_RX, @@ -154,6 +157,7 @@ struct bfin_serial_res bfin_serial_resource[] = { { 0xFFC02000, IRQ_UART1_RX, + IRQ_UART1_ERROR, #ifdef CONFIG_SERIAL_BFIN_DMA CH_UART1_TX, CH_UART1_RX, diff --git a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h index e8c41fd842b..a625659dd67 100644 --- a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h @@ -53,9 +53,9 @@ #define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) #define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) -#define UART_GET_CTS(x) gpio_get_value(x->cts_pin) -#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1) -#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0) +#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin)) +#define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1) +#define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0) #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) #define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0) @@ -87,6 +87,7 @@ struct bfin_serial_port { struct uart_port port; unsigned int old_status; + int status_irq; unsigned int lsr; #ifdef CONFIG_SERIAL_BFIN_DMA int tx_done; @@ -125,6 +126,7 @@ static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart) struct bfin_serial_res { unsigned long uart_base_addr; int uart_irq; + int uart_status_irq; #ifdef CONFIG_SERIAL_BFIN_DMA unsigned int uart_tx_dma_channel; unsigned int uart_rx_dma_channel; @@ -140,6 +142,7 @@ struct bfin_serial_res bfin_serial_resource[] = { { 0xFFC00400, IRQ_UART0_RX, + IRQ_UART0_ERROR, #ifdef CONFIG_SERIAL_BFIN_DMA CH_UART0_TX, CH_UART0_RX, @@ -154,6 +157,7 @@ struct bfin_serial_res bfin_serial_resource[] = { { 0xFFC02000, IRQ_UART1_RX, + IRQ_UART1_ERROR, #ifdef CONFIG_SERIAL_BFIN_DMA CH_UART1_TX, CH_UART1_RX, @@ -167,29 +171,3 @@ struct bfin_serial_res bfin_serial_resource[] = { }; #define DRIVER_NAME "bfin-uart" - -static void bfin_serial_hw_init(struct bfin_serial_port *uart) -{ - -#ifdef CONFIG_SERIAL_BFIN_UART0 - peripheral_request(P_UART0_TX, DRIVER_NAME); - peripheral_request(P_UART0_RX, DRIVER_NAME); -#endif - -#ifdef CONFIG_SERIAL_BFIN_UART1 - peripheral_request(P_UART1_TX, DRIVER_NAME); - peripheral_request(P_UART1_RX, DRIVER_NAME); -#endif - -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - if (uart->cts_pin >= 0) { - gpio_request(uart->cts_pin, DRIVER_NAME); - gpio_direction_input(uart->cts_pin); - } - - if (uart->rts_pin >= 0) { - gpio_request(uart->rts_pin, DRIVER_NAME); - gpio_direction_output(uart->rts_pin, 0); - } -#endif -} diff --git a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h index 5f517f53b0f..a3789d7ccf8 100644 --- a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h @@ -53,9 +53,9 @@ #define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) #define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) -#define UART_GET_CTS(x) gpio_get_value(x->cts_pin) -#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1) -#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0) +#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin)) +#define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1) +#define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0) #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) #define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0) @@ -74,6 +74,7 @@ struct bfin_serial_port { struct uart_port port; unsigned int old_status; + int status_irq; unsigned int lsr; #ifdef CONFIG_SERIAL_BFIN_DMA int tx_done; @@ -116,6 +117,7 @@ static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart) struct bfin_serial_res { unsigned long uart_base_addr; int uart_irq; + int uart_status_irq; #ifdef CONFIG_SERIAL_BFIN_DMA unsigned int uart_tx_dma_channel; unsigned int uart_rx_dma_channel; @@ -130,6 +132,7 @@ struct bfin_serial_res bfin_serial_resource[] = { { 0xFFC00400, IRQ_UART_RX, + IRQ_UART_ERROR, #ifdef CONFIG_SERIAL_BFIN_DMA CH_UART_TX, CH_UART_RX, @@ -142,23 +145,3 @@ struct bfin_serial_res bfin_serial_resource[] = { }; #define DRIVER_NAME "bfin-uart" - -static void bfin_serial_hw_init(struct bfin_serial_port *uart) -{ - -#ifdef CONFIG_SERIAL_BFIN_UART0 - peripheral_request(P_UART0_TX, DRIVER_NAME); - peripheral_request(P_UART0_RX, DRIVER_NAME); -#endif - -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - if (uart->cts_pin >= 0) { - gpio_request(uart->cts_pin, DRIVER_NAME); - gpio_direction_input(uart->cts_pin); - } - if (uart->rts_pin >= 0) { - gpio_request(uart->rts_pin, DRIVER_NAME); - gpio_direction_output(uart->rts_pin, 0); - } -#endif -} diff --git a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h index 9e34700844a..b86662fb9de 100644 --- a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h @@ -53,9 +53,9 @@ #define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) #define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) -#define UART_GET_CTS(x) gpio_get_value(x->cts_pin) -#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1) -#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0) +#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin)) +#define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1) +#define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0) #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) #define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0) @@ -87,6 +87,7 @@ struct bfin_serial_port { struct uart_port port; unsigned int old_status; + int status_irq; unsigned int lsr; #ifdef CONFIG_SERIAL_BFIN_DMA int tx_done; @@ -99,7 +100,6 @@ struct bfin_serial_port { struct work_struct tx_dma_workqueue; #endif #ifdef CONFIG_SERIAL_BFIN_CTSRTS - struct timer_list cts_timer; int cts_pin; int rts_pin; #endif @@ -125,6 +125,7 @@ static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart) struct bfin_serial_res { unsigned long uart_base_addr; int uart_irq; + int uart_status_irq; #ifdef CONFIG_SERIAL_BFIN_DMA unsigned int uart_tx_dma_channel; unsigned int uart_rx_dma_channel; @@ -140,6 +141,7 @@ struct bfin_serial_res bfin_serial_resource[] = { { 0xFFC00400, IRQ_UART0_RX, + IRQ_UART0_ERROR, #ifdef CONFIG_SERIAL_BFIN_DMA CH_UART0_TX, CH_UART0_RX, @@ -154,6 +156,7 @@ struct bfin_serial_res bfin_serial_resource[] = { { 0xFFC02000, IRQ_UART1_RX, + IRQ_UART1_ERROR, #ifdef CONFIG_SERIAL_BFIN_DMA CH_UART1_TX, CH_UART1_RX, @@ -167,29 +170,3 @@ struct bfin_serial_res bfin_serial_resource[] = { }; #define DRIVER_NAME "bfin-uart" - -static void bfin_serial_hw_init(struct bfin_serial_port *uart) -{ - -#ifdef CONFIG_SERIAL_BFIN_UART0 - peripheral_request(P_UART0_TX, DRIVER_NAME); - peripheral_request(P_UART0_RX, DRIVER_NAME); -#endif - -#ifdef CONFIG_SERIAL_BFIN_UART1 - peripheral_request(P_UART1_TX, DRIVER_NAME); - peripheral_request(P_UART1_RX, DRIVER_NAME); -#endif - -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - if (uart->cts_pin >= 0) { - gpio_request(uart->cts_pin, DRIVER_NAME); - gpio_direction_input(uart->cts_pin); - } - - if (uart->rts_pin >= 0) { - gpio_request(uart->rts_pin, DRIVER_NAME); - gpio_direction_output(uart->rts_pin, 0); - } -#endif -} diff --git a/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h index 3c2811ebecd..c536551eb4b 100644 --- a/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h @@ -53,9 +53,9 @@ #define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) #define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) -#define UART_GET_CTS(x) gpio_get_value(x->cts_pin) -#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1) -#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0) +#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin)) +#define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1) +#define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0) #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) #define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0) @@ -87,6 +87,7 @@ struct bfin_serial_port { struct uart_port port; unsigned int old_status; + int status_irq; unsigned int lsr; #ifdef CONFIG_SERIAL_BFIN_DMA int tx_done; @@ -125,6 +126,7 @@ static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart) struct bfin_serial_res { unsigned long uart_base_addr; int uart_irq; + int uart_status_irq; #ifdef CONFIG_SERIAL_BFIN_DMA unsigned int uart_tx_dma_channel; unsigned int uart_rx_dma_channel; @@ -140,6 +142,7 @@ struct bfin_serial_res bfin_serial_resource[] = { { 0xFFC00400, IRQ_UART0_RX, + IRQ_UART0_ERROR, #ifdef CONFIG_SERIAL_BFIN_DMA CH_UART0_TX, CH_UART0_RX, @@ -154,6 +157,7 @@ struct bfin_serial_res bfin_serial_resource[] = { { 0xFFC02000, IRQ_UART1_RX, + IRQ_UART1_ERROR, #ifdef CONFIG_SERIAL_BFIN_DMA CH_UART1_TX, CH_UART1_RX, diff --git a/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h index c05e79cba25..2d1b5fa3cca 100644 --- a/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h @@ -46,41 +46,27 @@ #define UART_PUT_CHAR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_THR),v) #define UART_PUT_DLL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLL),v) #define UART_SET_IER(uart,v) bfin_write16(((uart)->port.membase + OFFSET_IER_SET),v) -#define UART_CLEAR_IER(uart,v) bfin_write16(((uart)->port.membase + OFFSET_IER_CLEAR),v) +#define UART_CLEAR_IER(uart,v) bfin_write16(((uart)->port.membase + OFFSET_IER_CLEAR),v) #define UART_PUT_DLH(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLH),v) #define UART_PUT_LSR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_LSR),v) #define UART_PUT_LCR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_LCR),v) #define UART_CLEAR_LSR(uart) bfin_write16(((uart)->port.membase + OFFSET_LSR), -1) #define UART_PUT_GCTL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_GCTL),v) #define UART_PUT_MCR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_MCR),v) +#define UART_CLEAR_SCTS(uart) bfin_write16(((uart)->port.membase + OFFSET_MSR),SCTS) #define UART_SET_DLAB(uart) /* MMRs not muxed on BF54x */ #define UART_CLEAR_DLAB(uart) /* MMRs not muxed on BF54x */ #define UART_GET_CTS(x) (UART_GET_MSR(x) & CTS) -#define UART_SET_RTS(x) (UART_PUT_MCR(x, UART_GET_MCR(x) | MRTS)) -#define UART_CLEAR_RTS(x) (UART_PUT_MCR(x, UART_GET_MCR(x) & ~MRTS)) +#define UART_DISABLE_RTS(x) UART_PUT_MCR(x, UART_GET_MCR(x) & ~(ARTS|MRTS)) +#define UART_ENABLE_RTS(x) UART_PUT_MCR(x, UART_GET_MCR(x) | MRTS | ARTS) #define UART_ENABLE_INTS(x, v) UART_SET_IER(x, v) #define UART_DISABLE_INTS(x) UART_CLEAR_IER(x, 0xF) -#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART2_CTSRTS) -# define CONFIG_SERIAL_BFIN_CTSRTS - -# ifndef CONFIG_UART0_CTS_PIN -# define CONFIG_UART0_CTS_PIN -1 -# endif - -# ifndef CONFIG_UART0_RTS_PIN -# define CONFIG_UART0_RTS_PIN -1 -# endif - -# ifndef CONFIG_UART2_CTS_PIN -# define CONFIG_UART2_CTS_PIN -1 -# endif - -# ifndef CONFIG_UART2_RTS_PIN -# define CONFIG_UART2_RTS_PIN -1 -# endif +#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS) || \ + defined(CONFIG_BFIN_UART2_CTSRTS) || defined(CONFIG_BFIN_UART3_CTSRTS) +# define CONFIG_SERIAL_BFIN_HARD_CTSRTS #endif #define BFIN_UART_TX_FIFO_SIZE 2 @@ -91,6 +77,7 @@ struct bfin_serial_port { struct uart_port port; unsigned int old_status; + int status_irq; #ifdef CONFIG_SERIAL_BFIN_DMA int tx_done; int tx_count; @@ -101,23 +88,24 @@ struct bfin_serial_port { unsigned int rx_dma_channel; struct work_struct tx_dma_workqueue; #endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - struct timer_list cts_timer; - int cts_pin; - int rts_pin; +#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS + int scts; + int cts_pin; + int rts_pin; #endif }; struct bfin_serial_res { unsigned long uart_base_addr; int uart_irq; + int uart_status_irq; #ifdef CONFIG_SERIAL_BFIN_DMA unsigned int uart_tx_dma_channel; unsigned int uart_rx_dma_channel; #endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - int uart_cts_pin; - int uart_rts_pin; +#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS + int uart_cts_pin; + int uart_rts_pin; #endif }; @@ -126,13 +114,14 @@ struct bfin_serial_res bfin_serial_resource[] = { { 0xFFC00400, IRQ_UART0_RX, + IRQ_UART0_ERROR, #ifdef CONFIG_SERIAL_BFIN_DMA CH_UART0_TX, CH_UART0_RX, #endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - CONFIG_UART0_CTS_PIN, - CONFIG_UART0_RTS_PIN, +#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS + 0, + 0, #endif }, #endif @@ -140,13 +129,14 @@ struct bfin_serial_res bfin_serial_resource[] = { { 0xFFC02000, IRQ_UART1_RX, + IRQ_UART1_ERROR, #ifdef CONFIG_SERIAL_BFIN_DMA CH_UART1_TX, CH_UART1_RX, #endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - 0, - 0, +#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS + GPIO_PE10, + GPIO_PE9, #endif }, #endif @@ -154,13 +144,14 @@ struct bfin_serial_res bfin_serial_resource[] = { { 0xFFC02100, IRQ_UART2_RX, + IRQ_UART2_ERROR, #ifdef CONFIG_SERIAL_BFIN_DMA CH_UART2_TX, CH_UART2_RX, #endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - CONFIG_UART2_CTS_PIN, - CONFIG_UART2_RTS_PIN, +#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS + 0, + 0, #endif }, #endif @@ -168,61 +159,17 @@ struct bfin_serial_res bfin_serial_resource[] = { { 0xFFC03100, IRQ_UART3_RX, + IRQ_UART3_ERROR, #ifdef CONFIG_SERIAL_BFIN_DMA CH_UART3_TX, CH_UART3_RX, #endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - 0, - 0, +#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS + GPIO_PB3, + GPIO_PB2, #endif }, #endif }; #define DRIVER_NAME "bfin-uart" - -static void bfin_serial_hw_init(struct bfin_serial_port *uart) -{ -#ifdef CONFIG_SERIAL_BFIN_UART0 - peripheral_request(P_UART0_TX, DRIVER_NAME); - peripheral_request(P_UART0_RX, DRIVER_NAME); -#endif - -#ifdef CONFIG_SERIAL_BFIN_UART1 - peripheral_request(P_UART1_TX, DRIVER_NAME); - peripheral_request(P_UART1_RX, DRIVER_NAME); - -#ifdef CONFIG_BFIN_UART1_CTSRTS - peripheral_request(P_UART1_RTS, DRIVER_NAME); - peripheral_request(P_UART1_CTS, DRIVER_NAME); -#endif -#endif - -#ifdef CONFIG_SERIAL_BFIN_UART2 - peripheral_request(P_UART2_TX, DRIVER_NAME); - peripheral_request(P_UART2_RX, DRIVER_NAME); -#endif - -#ifdef CONFIG_SERIAL_BFIN_UART3 - peripheral_request(P_UART3_TX, DRIVER_NAME); - peripheral_request(P_UART3_RX, DRIVER_NAME); - -#ifdef CONFIG_BFIN_UART3_CTSRTS - peripheral_request(P_UART3_RTS, DRIVER_NAME); - peripheral_request(P_UART3_CTS, DRIVER_NAME); -#endif -#endif - SSYNC(); -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - if (uart->cts_pin >= 0) { - gpio_request(uart->cts_pin, DRIVER_NAME); - gpio_direction_input(uart->cts_pin); - } - - if (uart->rts_pin >= 0) { - gpio_request(uart->rts_pin, DRIVER_NAME); - gpio_direction_output(uart->rts_pin, 0); - } -#endif -} diff --git a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h index ca8c5f64520..a1b50878553 100644 --- a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h @@ -53,9 +53,9 @@ #define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) #define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) -#define UART_GET_CTS(x) gpio_get_value(x->cts_pin) -#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1) -#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0) +#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin)) +#define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1) +#define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0) #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) #define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0) @@ -74,6 +74,7 @@ struct bfin_serial_port { struct uart_port port; unsigned int old_status; + int status_irq; unsigned int lsr; #ifdef CONFIG_SERIAL_BFIN_DMA int tx_done; @@ -116,6 +117,7 @@ static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart) struct bfin_serial_res { unsigned long uart_base_addr; int uart_irq; + int uart_status_irq; #ifdef CONFIG_SERIAL_BFIN_DMA unsigned int uart_tx_dma_channel; unsigned int uart_rx_dma_channel; @@ -130,6 +132,7 @@ struct bfin_serial_res bfin_serial_resource[] = { { 0xFFC00400, IRQ_UART_RX, + IRQ_UART_ERROR, #ifdef CONFIG_SERIAL_BFIN_DMA CH_UART_TX, CH_UART_RX, @@ -142,23 +145,3 @@ struct bfin_serial_res bfin_serial_resource[] = { }; #define DRIVER_NAME "bfin-uart" - -static void bfin_serial_hw_init(struct bfin_serial_port *uart) -{ - -#ifdef CONFIG_SERIAL_BFIN_UART0 - peripheral_request(P_UART0_TX, DRIVER_NAME); - peripheral_request(P_UART0_RX, DRIVER_NAME); -#endif - -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - if (uart->cts_pin >= 0) { - gpio_request(uart->cts_pin, DRIVER_NAME); - gpio_direction_input(uart->cts_pin); - } - if (uart->rts_pin >= 0) { - gpio_request(uart->rts_pin, DRIVER_NAME); - gpio_direction_output(uart->rts_pin, 0); - } -#endif -} diff --git a/arch/cris/include/asm/ioctls.h b/arch/cris/include/asm/ioctls.h index 4f4e52531fa..35bbc181598 100644 --- a/arch/cris/include/asm/ioctls.h +++ b/arch/cris/include/asm/ioctls.h @@ -74,8 +74,9 @@ #define TIOCSHAYESESP 0x545F /* Set Hayes ESP configuration */ #define FIOQSIZE 0x5460 -#define TIOCSERSETRS485 0x5461 /* enable rs-485 */ -#define TIOCSERWRRS485 0x5462 /* write rs-485 */ +#define TIOCSERSETRS485 0x5461 /* enable rs-485 (deprecated) */ +#define TIOCSERWRRS485 0x5462 /* write rs-485 */ +#define TIOCSRS485 0x5463 /* enable rs-485 */ /* Used for packet mode */ #define TIOCPKT_DATA 0 diff --git a/arch/cris/include/asm/rs485.h b/arch/cris/include/asm/rs485.h index c331c51b0c2..ad40f9fbcb8 100644 --- a/arch/cris/include/asm/rs485.h +++ b/arch/cris/include/asm/rs485.h @@ -1,15 +1,13 @@ /* RS-485 structures */ -/* RS-485 support */ -/* Used with ioctl() TIOCSERSETRS485 */ +/* Used with ioctl() TIOCSERSETRS485 for backward compatibility! + * XXX: Do not use it for new code! + */ struct rs485_control { unsigned short rts_on_send; unsigned short rts_after_sent; unsigned long delay_rts_before_send; unsigned short enabled; -#ifdef __KERNEL__ - int disable_serial_loopback; -#endif }; /* Used with ioctl() TIOCSERWRRS485 */ diff --git a/arch/cris/include/asm/termios.h b/arch/cris/include/asm/termios.h index b0124e6c2e4..1265109f4ce 100644 --- a/arch/cris/include/asm/termios.h +++ b/arch/cris/include/asm/termios.h @@ -4,6 +4,7 @@ #include <asm/termbits.h> #include <asm/ioctls.h> #include <asm/rs485.h> +#include <linux/serial.h> struct winsize { unsigned short ws_row; diff --git a/arch/frv/include/asm/Kbuild b/arch/frv/include/asm/Kbuild new file mode 100644 index 00000000000..0f8956def73 --- /dev/null +++ b/arch/frv/include/asm/Kbuild @@ -0,0 +1,5 @@ +include include/asm-generic/Kbuild.asm + +header-y += registers.h + +unifdef-y += termios.h diff --git a/arch/frv/include/asm/atomic.h b/arch/frv/include/asm/atomic.h new file mode 100644 index 00000000000..296c35cfb20 --- /dev/null +++ b/arch/frv/include/asm/atomic.h @@ -0,0 +1,198 @@ +/* atomic.h: atomic operation emulation for FR-V + * + * For an explanation of how atomic ops work in this arch, see: + * Documentation/frv/atomic-ops.txt + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _ASM_ATOMIC_H +#define _ASM_ATOMIC_H + +#include <linux/types.h> +#include <asm/spr-regs.h> +#include <asm/system.h> + +#ifdef CONFIG_SMP +#error not SMP safe +#endif + +/* + * Atomic operations that C can't guarantee us. Useful for + * resource counting etc.. + * + * We do not have SMP systems, so we don't have to deal with that. + */ + +/* Atomic operations are already serializing */ +#define smp_mb__before_atomic_dec() barrier() +#define smp_mb__after_atomic_dec() barrier() +#define smp_mb__before_atomic_inc() barrier() +#define smp_mb__after_atomic_inc() barrier() + +#define ATOMIC_INIT(i) { (i) } +#define atomic_read(v) ((v)->counter) +#define atomic_set(v, i) (((v)->counter) = (i)) + +#ifndef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS +static inline int atomic_add_return(int i, atomic_t *v) +{ + unsigned long val; + + asm("0: \n" + " orcc gr0,gr0,gr0,icc3 \n" /* set ICC3.Z */ + " ckeq icc3,cc7 \n" + " ld.p %M0,%1 \n" /* LD.P/ORCR must be atomic */ + " orcr cc7,cc7,cc3 \n" /* set CC3 to true */ + " add%I2 %1,%2,%1 \n" + " cst.p %1,%M0 ,cc3,#1 \n" + " corcc gr29,gr29,gr0 ,cc3,#1 \n" /* clear ICC3.Z if store happens */ + " beq icc3,#0,0b \n" + : "+U"(v->counter), "=&r"(val) + : "NPr"(i) + : "memory", "cc7", "cc3", "icc3" + ); + + return val; +} + +static inline int atomic_sub_return(int i, atomic_t *v) +{ + unsigned long val; + + asm("0: \n" + " orcc gr0,gr0,gr0,icc3 \n" /* set ICC3.Z */ + " ckeq icc3,cc7 \n" + " ld.p %M0,%1 \n" /* LD.P/ORCR must be atomic */ + " orcr cc7,cc7,cc3 \n" /* set CC3 to true */ + " sub%I2 %1,%2,%1 \n" + " cst.p %1,%M0 ,cc3,#1 \n" + " corcc gr29,gr29,gr0 ,cc3,#1 \n" /* clear ICC3.Z if store happens */ + " beq icc3,#0,0b \n" + : "+U"(v->counter), "=&r"(val) + : "NPr"(i) + : "memory", "cc7", "cc3", "icc3" + ); + + return val; +} + +#else + +extern int atomic_add_return(int i, atomic_t *v); +extern int atomic_sub_return(int i, atomic_t *v); + +#endif + +static inline int atomic_add_negative(int i, atomic_t *v) +{ + return atomic_add_return(i, v) < 0; +} + +static inline void atomic_add(int i, atomic_t *v) +{ + atomic_add_return(i, v); +} + +static inline void atomic_sub(int i, atomic_t *v) +{ + atomic_sub_return(i, v); +} + +static inline void atomic_inc(atomic_t *v) +{ + atomic_add_return(1, v); +} + +static inline void atomic_dec(atomic_t *v) +{ + atomic_sub_return(1, v); +} + +#define atomic_dec_return(v) atomic_sub_return(1, (v)) +#define atomic_inc_return(v) atomic_add_return(1, (v)) + +#define atomic_sub_and_test(i,v) (atomic_sub_return((i), (v)) == 0) +#define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0) +#define atomic_inc_and_test(v) (atomic_add_return(1, (v)) == 0) + +/*****************************************************************************/ +/* + * exchange value with memory + */ +#ifndef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS + +#define xchg(ptr, x) \ +({ \ + __typeof__(ptr) __xg_ptr = (ptr); \ + __typeof__(*(ptr)) __xg_orig; \ + \ + switch (sizeof(__xg_orig)) { \ + case 4: \ + asm volatile( \ + "swap%I0 %M0,%1" \ + : "+m"(*__xg_ptr), "=r"(__xg_orig) \ + : "1"(x) \ + : "memory" \ + ); \ + break; \ + \ + default: \ + __xg_orig = (__typeof__(__xg_orig))0; \ + asm volatile("break"); \ + break; \ + } \ + \ + __xg_orig; \ +}) + +#else + +extern uint32_t __xchg_32(uint32_t i, volatile void *v); + +#define xchg(ptr, x) \ +({ \ + __typeof__(ptr) __xg_ptr = (ptr); \ + __typeof__(*(ptr)) __xg_orig; \ + \ + switch (sizeof(__xg_orig)) { \ + case 4: __xg_orig = (__typeof__(*(ptr))) __xchg_32((uint32_t) x, __xg_ptr); break; \ + default: \ + __xg_orig = (__typeof__(__xg_orig))0; \ + asm volatile("break"); \ + break; \ + } \ + __xg_orig; \ +}) + +#endif + +#define tas(ptr) (xchg((ptr), 1)) + +#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), old, new)) +#define atomic_xchg(v, new) (xchg(&((v)->counter), new)) + +static __inline__ int atomic_add_unless(atomic_t *v, int a, int u) +{ + int c, old; + c = atomic_read(v); + for (;;) { + if (unlikely(c == (u))) + break; + old = atomic_cmpxchg((v), c, c + (a)); + if (likely(old == c)) + break; + c = old; + } + return c != (u); +} + +#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) + +#include <asm-generic/atomic.h> +#endif /* _ASM_ATOMIC_H */ diff --git a/arch/frv/include/asm/auxvec.h b/arch/frv/include/asm/auxvec.h new file mode 100644 index 00000000000..07710778fa1 --- /dev/null +++ b/arch/frv/include/asm/auxvec.h @@ -0,0 +1,4 @@ +#ifndef __FRV_AUXVEC_H +#define __FRV_AUXVEC_H + +#endif diff --git a/arch/frv/include/asm/ax88796.h b/arch/frv/include/asm/ax88796.h new file mode 100644 index 00000000000..637e980393c --- /dev/null +++ b/arch/frv/include/asm/ax88796.h @@ -0,0 +1,22 @@ +/* ax88796.h: access points to the driver for the AX88796 NE2000 clone + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_AX88796_H +#define _ASM_AX88796_H + +#include <asm/mb-regs.h> + +#define AX88796_IOADDR (__region_CS1 + 0x200) +#define AX88796_IRQ IRQ_CPU_EXTERNAL7 +#define AX88796_FULL_DUPLEX 0 /* force full duplex */ +#define AX88796_BUS_INFO "CS1#+0x200" /* bus info for ethtool */ + +#endif /* _ASM_AX88796_H */ diff --git a/arch/frv/include/asm/bitops.h b/arch/frv/include/asm/bitops.h new file mode 100644 index 00000000000..287f6f697ce --- /dev/null +++ b/arch/frv/include/asm/bitops.h @@ -0,0 +1,412 @@ +/* bitops.h: bit operations for the Fujitsu FR-V CPUs + * + * For an explanation of how atomic ops work in this arch, see: + * Documentation/frv/atomic-ops.txt + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _ASM_BITOPS_H +#define _ASM_BITOPS_H + +#include <linux/compiler.h> +#include <asm/byteorder.h> + +#ifdef __KERNEL__ + +#ifndef _LINUX_BITOPS_H +#error only <linux/bitops.h> can be included directly +#endif + +#include <asm-generic/bitops/ffz.h> + +/* + * clear_bit() doesn't provide any barrier for the compiler. + */ +#define smp_mb__before_clear_bit() barrier() +#define smp_mb__after_clear_bit() barrier() + +#ifndef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS +static inline +unsigned long atomic_test_and_ANDNOT_mask(unsigned long mask, volatile unsigned long *v) +{ + unsigned long old, tmp; + + asm volatile( + "0: \n" + " orcc gr0,gr0,gr0,icc3 \n" /* set ICC3.Z */ + " ckeq icc3,cc7 \n" + " ld.p %M0,%1 \n" /* LD.P/ORCR are atomic */ + " orcr cc7,cc7,cc3 \n" /* set CC3 to true */ + " and%I3 %1,%3,%2 \n" + " cst.p %2,%M0 ,cc3,#1 \n" /* if store happens... */ + " corcc gr29,gr29,gr0 ,cc3,#1 \n" /* ... clear ICC3.Z */ + " beq icc3,#0,0b \n" + : "+U"(*v), "=&r"(old), "=r"(tmp) + : "NPr"(~mask) + : "memory", "cc7", "cc3", "icc3" + ); + + return old; +} + +static inline +unsigned long atomic_test_and_OR_mask(unsigned long mask, volatile unsigned long *v) +{ + unsigned long old, tmp; + + asm volatile( + "0: \n" + " orcc gr0,gr0,gr0,icc3 \n" /* set ICC3.Z */ + " ckeq icc3,cc7 \n" + " ld.p %M0,%1 \n" /* LD.P/ORCR are atomic */ + " orcr cc7,cc7,cc3 \n" /* set CC3 to true */ + " or%I3 %1,%3,%2 \n" + " cst.p %2,%M0 ,cc3,#1 \n" /* if store happens... */ + " corcc gr29,gr29,gr0 ,cc3,#1 \n" /* ... clear ICC3.Z */ + " beq icc3,#0,0b \n" + : "+U"(*v), "=&r"(old), "=r"(tmp) + : "NPr"(mask) + : "memory", "cc7", "cc3", "icc3" + ); + + return old; +} + +static inline +unsigned long atomic_test_and_XOR_mask(unsigned long mask, volatile unsigned long *v) +{ + unsigned long old, tmp; + + asm volatile( + "0: \n" + " orcc gr0,gr0,gr0,icc3 \n" /* set ICC3.Z */ + " ckeq icc3,cc7 \n" + " ld.p %M0,%1 \n" /* LD.P/ORCR are atomic */ + " orcr cc7,cc7,cc3 \n" /* set CC3 to true */ + " xor%I3 %1,%3,%2 \n" + " cst.p %2,%M0 ,cc3,#1 \n" /* if store happens... */ + " corcc gr29,gr29,gr0 ,cc3,#1 \n" /* ... clear ICC3.Z */ + " beq icc3,#0,0b \n" + : "+U"(*v), "=&r"(old), "=r"(tmp) + : "NPr"(mask) + : "memory", "cc7", "cc3", "icc3" + ); + + return old; +} + +#else + +extern unsigned long atomic_test_and_ANDNOT_mask(unsigned long mask, volatile unsigned long *v); +extern unsigned long atomic_test_and_OR_mask(unsigned long mask, volatile unsigned long *v); +extern unsigned long atomic_test_and_XOR_mask(unsigned long mask, volatile unsigned long *v); + +#endif + +#define atomic_clear_mask(mask, v) atomic_test_and_ANDNOT_mask((mask), (v)) +#define atomic_set_mask(mask, v) atomic_test_and_OR_mask((mask), (v)) + +static inline int test_and_clear_bit(int nr, volatile void *addr) +{ + volatile unsigned long *ptr = addr; + unsigned long mask = 1UL << (nr & 31); + ptr += nr >> 5; + return (atomic_test_and_ANDNOT_mask(mask, ptr) & mask) != 0; +} + +static inline int test_and_set_bit(int nr, volatile void *addr) +{ + volatile unsigned long *ptr = addr; + unsigned long mask = 1UL << (nr & 31); + ptr += nr >> 5; + return (atomic_test_and_OR_mask(mask, ptr) & mask) != 0; +} + +static inline int test_and_change_bit(int nr, volatile void *addr) +{ + volatile unsigned long *ptr = addr; + unsigned long mask = 1UL << (nr & 31); + ptr += nr >> 5; + return (atomic_test_and_XOR_mask(mask, ptr) & mask) != 0; +} + +static inline void clear_bit(int nr, volatile void *addr) +{ + test_and_clear_bit(nr, addr); +} + +static inline void set_bit(int nr, volatile void *addr) +{ + test_and_set_bit(nr, addr); +} + +static inline void change_bit(int nr, volatile void * addr) +{ + test_and_change_bit(nr, addr); +} + +static inline void __clear_bit(int nr, volatile void * addr) +{ + volatile unsigned long *a = addr; + int mask; + + a += nr >> 5; + mask = 1 << (nr & 31); + *a &= ~mask; +} + +static inline void __set_bit(int nr, volatile void * addr) +{ + volatile unsigned long *a = addr; + int mask; + + a += nr >> 5; + mask = 1 << (nr & 31); + *a |= mask; +} + +static inline void __change_bit(int nr, volatile void *addr) +{ + volatile unsigned long *a = addr; + int mask; + + a += nr >> 5; + mask = 1 << (nr & 31); + *a ^= mask; +} + +static inline int __test_and_clear_bit(int nr, volatile void * addr) +{ + volatile unsigned long *a = addr; + int mask, retval; + + a += nr >> 5; + mask = 1 << (nr & 31); + retval = (mask & *a) != 0; + *a &= ~mask; + return retval; +} + +static inline int __test_and_set_bit(int nr, volatile void * addr) +{ + volatile unsigned long *a = addr; + int mask, retval; + + a += nr >> 5; + mask = 1 << (nr & 31); + retval = (mask & *a) != 0; + *a |= mask; + return retval; +} + +static inline int __test_and_change_bit(int nr, volatile void * addr) +{ + volatile unsigned long *a = addr; + int mask, retval; + + a += nr >> 5; + mask = 1 << (nr & 31); + retval = (mask & *a) != 0; + *a ^= mask; + return retval; +} + +/* + * This routine doesn't need to be atomic. + */ +static inline int __constant_test_bit(int nr, const volatile void * addr) +{ + return ((1UL << (nr & 31)) & (((const volatile unsigned int *) addr)[nr >> 5])) != 0; +} + +static inline int __test_bit(int nr, const volatile void * addr) +{ + int * a = (int *) addr; + int mask; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + return ((mask & *a) != 0); +} + +#define test_bit(nr,addr) \ +(__builtin_constant_p(nr) ? \ + __constant_test_bit((nr),(addr)) : \ + __test_bit((nr),(addr))) + +#include <asm-generic/bitops/find.h> + +/** + * fls - find last bit set + * @x: the word to search + * + * This is defined the same way as ffs: + * - return 32..1 to indicate bit 31..0 most significant bit set + * - return 0 to indicate no bits set + */ +#define fls(x) \ +({ \ + int bit; \ + \ + asm(" subcc %1,gr0,gr0,icc0 \n" \ + " ckne icc0,cc4 \n" \ + " cscan.p %1,gr0,%0 ,cc4,#1 \n" \ + " csub %0,%0,%0 ,cc4,#0 \n" \ + " csub %2,%0,%0 ,cc4,#1 \n" \ + : "=&r"(bit) \ + : "r"(x), "r"(32) \ + : "icc0", "cc4" \ + ); \ + \ + bit; \ +}) + +/** + * fls64 - find last bit set in a 64-bit value + * @n: the value to search + * + * This is defined the same way as ffs: + * - return 64..1 to indicate bit 63..0 most significant bit set + * - return 0 to indicate no bits set + */ +static inline __attribute__((const)) +int fls64(u64 n) +{ + union { + u64 ll; + struct { u32 h, l; }; + } _; + int bit, x, y; + + _.ll = n; + + asm(" subcc.p %3,gr0,gr0,icc0 \n" + " subcc %4,gr0,gr0,icc1 \n" + " ckne icc0,cc4 \n" + " ckne icc1,cc5 \n" + " norcr cc4,cc5,cc6 \n" + " csub.p %0,%0,%0 ,cc6,1 \n" + " orcr cc5,cc4,cc4 \n" + " andcr cc4,cc5,cc4 \n" + " cscan.p %3,gr0,%0 ,cc4,0 \n" + " setlos #64,%1 \n" + " cscan.p %4,gr0,%0 ,cc4,1 \n" + " setlos #32,%2 \n" + " csub.p %1,%0,%0 ,cc4,0 \n" + " csub %2,%0,%0 ,cc4,1 \n" + : "=&r"(bit), "=r"(x), "=r"(y) + : "0r"(_.h), "r"(_.l) + : "icc0", "icc1", "cc4", "cc5", "cc6" + ); + return bit; + +} + +/** + * ffs - find first bit set + * @x: the word to search + * + * - return 32..1 to indicate bit 31..0 most least significant bit set + * - return 0 to indicate no bits set + */ +static inline __attribute__((const)) +int ffs(int x) +{ + /* Note: (x & -x) gives us a mask that is the least significant + * (rightmost) 1-bit of the value in x. + */ + return fls(x & -x); +} + +/** + * __ffs - find first bit set + * @x: the word to search + * + * - return 31..0 to indicate bit 31..0 most least significant bit set + * - if no bits are set in x, the result is undefined + */ +static inline __attribute__((const)) +int __ffs(unsigned long x) +{ + int bit; + asm("scan %1,gr0,%0" : "=r"(bit) : "r"(x & -x)); + return 31 - bit; +} + +/** + * __fls - find last (most-significant) set bit in a long word + * @word: the word to search + * + * Undefined if no set bit exists, so code should check against 0 first. + */ +static inline unsigned long __fls(unsigned long word) +{ + unsigned long bit; + asm("scan %1,gr0,%0" : "=r"(bit) : "r"(word)); + return bit; +} + +/* + * special slimline version of fls() for calculating ilog2_u32() + * - note: no protection against n == 0 + */ +#define ARCH_HAS_ILOG2_U32 +static inline __attribute__((const)) +int __ilog2_u32(u32 n) +{ + int bit; + asm("scan %1,gr0,%0" : "=r"(bit) : "r"(n)); + return 31 - bit; +} + +/* + * special slimline version of fls64() for calculating ilog2_u64() + * - note: no protection against n == 0 + */ +#define ARCH_HAS_ILOG2_U64 +static inline __attribute__((const)) +int __ilog2_u64(u64 n) +{ + union { + u64 ll; + struct { u32 h, l; }; + } _; + int bit, x, y; + + _.ll = n; + + asm(" subcc %3,gr0,gr0,icc0 \n" + " ckeq icc0,cc4 \n" + " cscan.p %3,gr0,%0 ,cc4,0 \n" + " setlos #63,%1 \n" + " cscan.p %4,gr0,%0 ,cc4,1 \n" + " setlos #31,%2 \n" + " csub.p %1,%0,%0 ,cc4,0 \n" + " csub %2,%0,%0 ,cc4,1 \n" + : "=&r"(bit), "=r"(x), "=r"(y) + : "0r"(_.h), "r"(_.l) + : "icc0", "cc4" + ); + return bit; +} + +#include <asm-generic/bitops/sched.h> +#include <asm-generic/bitops/hweight.h> +#include <asm-generic/bitops/lock.h> + +#include <asm-generic/bitops/ext2-non-atomic.h> + +#define ext2_set_bit_atomic(lock,nr,addr) test_and_set_bit ((nr) ^ 0x18, (addr)) +#define ext2_clear_bit_atomic(lock,nr,addr) test_and_clear_bit((nr) ^ 0x18, (addr)) + +#include <asm-generic/bitops/minix-le.h> + +#endif /* __KERNEL__ */ + +#endif /* _ASM_BITOPS_H */ diff --git a/arch/frv/include/asm/bug.h b/arch/frv/include/asm/bug.h new file mode 100644 index 00000000000..6b1b44d7102 --- /dev/null +++ b/arch/frv/include/asm/bug.h @@ -0,0 +1,53 @@ +/* bug.h: FRV bug trapping + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _ASM_BUG_H +#define _ASM_BUG_H + +#include <linux/linkage.h> + +#ifdef CONFIG_BUG +/* + * Tell the user there is some problem. + */ +extern asmlinkage void __debug_bug_trap(int signr); + +#ifdef CONFIG_NO_KERNEL_MSG +#define _debug_bug_printk() +#else +extern void __debug_bug_printk(const char *file, unsigned line); +#define _debug_bug_printk() __debug_bug_printk(__FILE__, __LINE__) +#endif + +#define _debug_bug_trap(signr) \ +do { \ + __debug_bug_trap(signr); \ + asm volatile("nop"); \ +} while(0) + +#define HAVE_ARCH_BUG +#define BUG() \ +do { \ + _debug_bug_printk(); \ + _debug_bug_trap(6 /*SIGABRT*/); \ +} while (0) + +#ifdef CONFIG_GDBSTUB +#define HAVE_ARCH_KGDB_RAISE +#define kgdb_raise(signr) do { _debug_bug_trap(signr); } while(0) + +#define HAVE_ARCH_KGDB_BAD_PAGE +#define kgdb_bad_page(page) do { kgdb_raise(SIGABRT); } while(0) +#endif +#endif + +#include <asm-generic/bug.h> + +#endif diff --git a/arch/frv/include/asm/bugs.h b/arch/frv/include/asm/bugs.h new file mode 100644 index 00000000000..f2382be2b46 --- /dev/null +++ b/arch/frv/include/asm/bugs.h @@ -0,0 +1,14 @@ +/* bugs.h: arch bug checking entry + * + * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +static inline void check_bugs(void) +{ +} diff --git a/arch/frv/include/asm/busctl-regs.h b/arch/frv/include/asm/busctl-regs.h new file mode 100644 index 00000000000..bb0ff4816e2 --- /dev/null +++ b/arch/frv/include/asm/busctl-regs.h @@ -0,0 +1,41 @@ +/* busctl-regs.h: FR400-series CPU bus controller registers + * + * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_BUSCTL_REGS_H +#define _ASM_BUSCTL_REGS_H + +/* bus controller registers */ +#define __get_LGCR() ({ *(volatile unsigned long *)(0xfe000010); }) +#define __get_LMAICR() ({ *(volatile unsigned long *)(0xfe000030); }) +#define __get_LEMBR() ({ *(volatile unsigned long *)(0xfe000040); }) +#define __get_LEMAM() ({ *(volatile unsigned long *)(0xfe000048); }) +#define __get_LCR(R) ({ *(volatile unsigned long *)(0xfe000100 + 8*(R)); }) +#define __get_LSBR(R) ({ *(volatile unsigned long *)(0xfe000c00 + 8*(R)); }) +#define __get_LSAM(R) ({ *(volatile unsigned long *)(0xfe000d00 + 8*(R)); }) + +#define __set_LGCR(V) do { *(volatile unsigned long *)(0xfe000010) = (V); } while(0) +#define __set_LMAICR(V) do { *(volatile unsigned long *)(0xfe000030) = (V); } while(0) +#define __set_LEMBR(V) do { *(volatile unsigned long *)(0xfe000040) = (V); } while(0) +#define __set_LEMAM(V) do { *(volatile unsigned long *)(0xfe000048) = (V); } while(0) +#define __set_LCR(R,V) do { *(volatile unsigned long *)(0xfe000100 + 8*(R)) = (V); } while(0) +#define __set_LSBR(R,V) do { *(volatile unsigned long *)(0xfe000c00 + 8*(R)) = (V); } while(0) +#define __set_LSAM(R,V) do { *(volatile unsigned long *)(0xfe000d00 + 8*(R)) = (V); } while(0) + +/* FR401 SDRAM controller registers */ +#define __get_DBR(R) ({ *(volatile unsigned long *)(0xfe000e00 + 8*(R)); }) +#define __get_DAM(R) ({ *(volatile unsigned long *)(0xfe000f00 + 8*(R)); }) + +/* FR551 SDRAM controller registers */ +#define __get_DARS(R) ({ *(volatile unsigned long *)(0xfeff0100 + 8*(R)); }) +#define __get_DAMK(R) ({ *(volatile unsigned long *)(0xfeff0110 + 8*(R)); }) + + +#endif /* _ASM_BUSCTL_REGS_H */ diff --git a/arch/frv/include/asm/byteorder.h b/arch/frv/include/asm/byteorder.h new file mode 100644 index 00000000000..f29b7593e08 --- /dev/null +++ b/arch/frv/include/asm/byteorder.h @@ -0,0 +1,6 @@ +#ifndef _ASM_BYTEORDER_H +#define _ASM_BYTEORDER_H + +#include <linux/byteorder/big_endian.h> + +#endif /* _ASM_BYTEORDER_H */ diff --git a/arch/frv/include/asm/cache.h b/arch/frv/include/asm/cache.h new file mode 100644 index 00000000000..2797163b8f4 --- /dev/null +++ b/arch/frv/include/asm/cache.h @@ -0,0 +1,23 @@ +/* cache.h: FRV cache definitions + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef __ASM_CACHE_H +#define __ASM_CACHE_H + + +/* bytes per L1 cache line */ +#define L1_CACHE_SHIFT (CONFIG_FRV_L1_CACHE_SHIFT) +#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) + +#define __cacheline_aligned __attribute__((aligned(L1_CACHE_BYTES))) +#define ____cacheline_aligned __attribute__((aligned(L1_CACHE_BYTES))) + +#endif diff --git a/arch/frv/include/asm/cacheflush.h b/arch/frv/include/asm/cacheflush.h new file mode 100644 index 00000000000..432a69e7f3d --- /dev/null +++ b/arch/frv/include/asm/cacheflush.h @@ -0,0 +1,104 @@ +/* cacheflush.h: FRV cache flushing routines + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_CACHEFLUSH_H +#define _ASM_CACHEFLUSH_H + +/* Keep includes the same across arches. */ +#include <linux/mm.h> + +/* + * virtually-indexed cache management (our cache is physically indexed) + */ +#define flush_cache_all() do {} while(0) +#define flush_cache_mm(mm) do {} while(0) +#define flush_cache_dup_mm(mm) do {} while(0) +#define flush_cache_range(mm, start, end) do {} while(0) +#define flush_cache_page(vma, vmaddr, pfn) do {} while(0) +#define flush_cache_vmap(start, end) do {} while(0) +#define flush_cache_vunmap(start, end) do {} while(0) +#define flush_dcache_mmap_lock(mapping) do {} while(0) +#define flush_dcache_mmap_unlock(mapping) do {} while(0) + +/* + * physically-indexed cache management + * - see arch/frv/lib/cache.S + */ +extern void frv_dcache_writeback(unsigned long start, unsigned long size); +extern void frv_cache_invalidate(unsigned long start, unsigned long size); +extern void frv_icache_invalidate(unsigned long start, unsigned long size); +extern void frv_cache_wback_inv(unsigned long start, unsigned long size); + +static inline void __flush_cache_all(void) +{ + asm volatile(" dcef @(gr0,gr0),#1 \n" + " icei @(gr0,gr0),#1 \n" + " membar \n" + : : : "memory" + ); +} + +/* dcache/icache coherency... */ +#ifdef CONFIG_MMU +extern void flush_dcache_page(struct page *page); +#else +static inline void flush_dcache_page(struct page *page) +{ + unsigned long addr = page_to_phys(page); + frv_dcache_writeback(addr, addr + PAGE_SIZE); +} +#endif + +static inline void flush_page_to_ram(struct page *page) +{ + flush_dcache_page(page); +} + +static inline void flush_icache(void) +{ + __flush_cache_all(); +} + +static inline void flush_icache_range(unsigned long start, unsigned long end) +{ + frv_cache_wback_inv(start, end); +} + +#ifdef CONFIG_MMU +extern void flush_icache_user_range(struct vm_area_struct *vma, struct page *page, + unsigned long start, unsigned long len); +#else +static inline void flush_icache_user_range(struct vm_area_struct *vma, struct page *page, + unsigned long start, unsigned long len) +{ + frv_cache_wback_inv(start, start + len); +} +#endif + +static inline void flush_icache_page(struct vm_area_struct *vma, struct page *page) +{ + flush_icache_user_range(vma, page, page_to_phys(page), PAGE_SIZE); +} + +/* + * permit ptrace to access another process's address space through the icache + * and the dcache + */ +#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ +do { \ + memcpy((dst), (src), (len)); \ + flush_icache_user_range((vma), (page), (vaddr), (len)); \ +} while(0) + +#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ + memcpy((dst), (src), (len)) + +#endif /* _ASM_CACHEFLUSH_H */ diff --git a/arch/frv/include/asm/checksum.h b/arch/frv/include/asm/checksum.h new file mode 100644 index 00000000000..269da09ff63 --- /dev/null +++ b/arch/frv/include/asm/checksum.h @@ -0,0 +1,180 @@ +/* checksum.h: FRV checksumming + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_CHECKSUM_H +#define _ASM_CHECKSUM_H + +#include <linux/in6.h> + +/* + * computes the checksum of a memory block at buff, length len, + * and adds in "sum" (32-bit) + * + * returns a 32-bit number suitable for feeding into itself + * or csum_tcpudp_magic + * + * this function must be called with even lengths, except + * for the last fragment, which may be odd + * + * it's best to have buff aligned on a 32-bit boundary + */ +__wsum csum_partial(const void *buff, int len, __wsum sum); + +/* + * the same as csum_partial, but copies from src while it + * checksums + * + * here even more important to align src and dst on a 32-bit (or even + * better 64-bit) boundary + */ +__wsum csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum); + +/* + * the same as csum_partial_copy, but copies from user space. + * + * here even more important to align src and dst on a 32-bit (or even + * better 64-bit) boundary + */ +extern __wsum csum_partial_copy_from_user(const void __user *src, void *dst, + int len, __wsum sum, int *csum_err); + +/* + * This is a version of ip_compute_csum() optimized for IP headers, + * which always checksum on 4 octet boundaries. + * + */ +static inline +__sum16 ip_fast_csum(const void *iph, unsigned int ihl) +{ + unsigned int tmp, inc, sum = 0; + + asm(" addcc gr0,gr0,gr0,icc0\n" /* clear icc0.C */ + " subi %1,#4,%1 \n" + "0: \n" + " ldu.p @(%1,%3),%4 \n" + " subicc %2,#1,%2,icc1 \n" + " addxcc.p %4,%0,%0,icc0 \n" + " bhi icc1,#2,0b \n" + + /* fold the 33-bit result into 16-bits */ + " addxcc gr0,%0,%0,icc0 \n" + " srli %0,#16,%1 \n" + " sethi #0,%0 \n" + " add %1,%0,%0 \n" + " srli %0,#16,%1 \n" + " add %1,%0,%0 \n" + + : "=r" (sum), "=r" (iph), "=r" (ihl), "=r" (inc), "=&r"(tmp) + : "0" (sum), "1" (iph), "2" (ihl), "3" (4), + "m"(*(volatile struct { int _[100]; } *)iph) + : "icc0", "icc1", "memory" + ); + + return (__force __sum16)~sum; +} + +/* + * Fold a partial checksum + */ +static inline __sum16 csum_fold(__wsum sum) +{ + unsigned int tmp; + + asm(" srli %0,#16,%1 \n" + " sethi #0,%0 \n" + " add %1,%0,%0 \n" + " srli %0,#16,%1 \n" + " add %1,%0,%0 \n" + : "=r"(sum), "=&r"(tmp) + : "0"(sum) + ); + + return (__force __sum16)~sum; +} + +/* + * computes the checksum of the TCP/UDP pseudo-header + * returns a 16-bit checksum, already complemented + */ +static inline __wsum +csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len, + unsigned short proto, __wsum sum) +{ + asm(" addcc %1,%0,%0,icc0 \n" + " addxcc %2,%0,%0,icc0 \n" + " addxcc %3,%0,%0,icc0 \n" + " addxcc gr0,%0,%0,icc0 \n" + : "=r" (sum) + : "r" (daddr), "r" (saddr), "r" (len + proto), "0"(sum) + : "icc0" + ); + return sum; +} + +static inline __sum16 +csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len, + unsigned short proto, __wsum sum) +{ + return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum)); +} + +/* + * this routine is used for miscellaneous IP-like checksums, mainly + * in icmp.c + */ +extern __sum16 ip_compute_csum(const void *buff, int len); + +#define _HAVE_ARCH_IPV6_CSUM +static inline __sum16 +csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr, + __u32 len, unsigned short proto, __wsum sum) +{ + unsigned long tmp, tmp2; + + asm(" addcc %2,%0,%0,icc0 \n" + + /* add up the source addr */ + " ldi @(%3,0),%1 \n" + " addxcc %1,%0,%0,icc0 \n" + " ldi @(%3,4),%2 \n" + " addxcc %2,%0,%0,icc0 \n" + " ldi @(%3,8),%1 \n" + " addxcc %1,%0,%0,icc0 \n" + " ldi @(%3,12),%2 \n" + " addxcc %2,%0,%0,icc0 \n" + + /* add up the dest addr */ + " ldi @(%4,0),%1 \n" + " addxcc %1,%0,%0,icc0 \n" + " ldi @(%4,4),%2 \n" + " addxcc %2,%0,%0,icc0 \n" + " ldi @(%4,8),%1 \n" + " addxcc %1,%0,%0,icc0 \n" + " ldi @(%4,12),%2 \n" + " addxcc %2,%0,%0,icc0 \n" + + /* fold the 33-bit result into 16-bits */ + " addxcc gr0,%0,%0,icc0 \n" + " srli %0,#16,%1 \n" + " sethi #0,%0 \n" + " add %1,%0,%0 \n" + " srli %0,#16,%1 \n" + " add %1,%0,%0 \n" + + : "=r" (sum), "=&r" (tmp), "=r" (tmp2) + : "r" (saddr), "r" (daddr), "0" (sum), "2" (len + proto) + : "icc0" + ); + + return (__force __sum16)~sum; +} + +#endif /* _ASM_CHECKSUM_H */ diff --git a/arch/frv/include/asm/cpu-irqs.h b/arch/frv/include/asm/cpu-irqs.h new file mode 100644 index 00000000000..478f3498fcf --- /dev/null +++ b/arch/frv/include/asm/cpu-irqs.h @@ -0,0 +1,81 @@ +/* cpu-irqs.h: on-CPU peripheral irqs + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_CPU_IRQS_H +#define _ASM_CPU_IRQS_H + +#ifndef __ASSEMBLY__ + +/* IRQ to level mappings */ +#define IRQ_GDBSTUB_LEVEL 15 +#define IRQ_UART_LEVEL 13 + +#ifdef CONFIG_GDBSTUB_UART0 +#define IRQ_UART0_LEVEL IRQ_GDBSTUB_LEVEL +#else +#define IRQ_UART0_LEVEL IRQ_UART_LEVEL +#endif + +#ifdef CONFIG_GDBSTUB_UART1 +#define IRQ_UART1_LEVEL IRQ_GDBSTUB_LEVEL +#else +#define IRQ_UART1_LEVEL IRQ_UART_LEVEL +#endif + +#define IRQ_DMA0_LEVEL 14 +#define IRQ_DMA1_LEVEL 14 +#define IRQ_DMA2_LEVEL 14 +#define IRQ_DMA3_LEVEL 14 +#define IRQ_DMA4_LEVEL 14 +#define IRQ_DMA5_LEVEL 14 +#define IRQ_DMA6_LEVEL 14 +#define IRQ_DMA7_LEVEL 14 + +#define IRQ_TIMER0_LEVEL 12 +#define IRQ_TIMER1_LEVEL 11 +#define IRQ_TIMER2_LEVEL 10 + +#define IRQ_XIRQ0_LEVEL 1 +#define IRQ_XIRQ1_LEVEL 2 +#define IRQ_XIRQ2_LEVEL 3 +#define IRQ_XIRQ3_LEVEL 4 +#define IRQ_XIRQ4_LEVEL 5 +#define IRQ_XIRQ5_LEVEL 6 +#define IRQ_XIRQ6_LEVEL 7 +#define IRQ_XIRQ7_LEVEL 8 + +/* IRQ IDs presented to drivers */ +#define IRQ_CPU__UNUSED IRQ_BASE_CPU +#define IRQ_CPU_UART0 (IRQ_BASE_CPU + IRQ_UART0_LEVEL) +#define IRQ_CPU_UART1 (IRQ_BASE_CPU + IRQ_UART1_LEVEL) +#define IRQ_CPU_TIMER0 (IRQ_BASE_CPU + IRQ_TIMER0_LEVEL) +#define IRQ_CPU_TIMER1 (IRQ_BASE_CPU + IRQ_TIMER1_LEVEL) +#define IRQ_CPU_TIMER2 (IRQ_BASE_CPU + IRQ_TIMER2_LEVEL) +#define IRQ_CPU_DMA0 (IRQ_BASE_CPU + IRQ_DMA0_LEVEL) +#define IRQ_CPU_DMA1 (IRQ_BASE_CPU + IRQ_DMA1_LEVEL) +#define IRQ_CPU_DMA2 (IRQ_BASE_CPU + IRQ_DMA2_LEVEL) +#define IRQ_CPU_DMA3 (IRQ_BASE_CPU + IRQ_DMA3_LEVEL) +#define IRQ_CPU_DMA4 (IRQ_BASE_CPU + IRQ_DMA4_LEVEL) +#define IRQ_CPU_DMA5 (IRQ_BASE_CPU + IRQ_DMA5_LEVEL) +#define IRQ_CPU_DMA6 (IRQ_BASE_CPU + IRQ_DMA6_LEVEL) +#define IRQ_CPU_DMA7 (IRQ_BASE_CPU + IRQ_DMA7_LEVEL) +#define IRQ_CPU_EXTERNAL0 (IRQ_BASE_CPU + IRQ_XIRQ0_LEVEL) +#define IRQ_CPU_EXTERNAL1 (IRQ_BASE_CPU + IRQ_XIRQ1_LEVEL) +#define IRQ_CPU_EXTERNAL2 (IRQ_BASE_CPU + IRQ_XIRQ2_LEVEL) +#define IRQ_CPU_EXTERNAL3 (IRQ_BASE_CPU + IRQ_XIRQ3_LEVEL) +#define IRQ_CPU_EXTERNAL4 (IRQ_BASE_CPU + IRQ_XIRQ4_LEVEL) +#define IRQ_CPU_EXTERNAL5 (IRQ_BASE_CPU + IRQ_XIRQ5_LEVEL) +#define IRQ_CPU_EXTERNAL6 (IRQ_BASE_CPU + IRQ_XIRQ6_LEVEL) +#define IRQ_CPU_EXTERNAL7 (IRQ_BASE_CPU + IRQ_XIRQ7_LEVEL) + +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_CPU_IRQS_H */ diff --git a/arch/frv/include/asm/cpumask.h b/arch/frv/include/asm/cpumask.h new file mode 100644 index 00000000000..d999c20c84d --- /dev/null +++ b/arch/frv/include/asm/cpumask.h @@ -0,0 +1,6 @@ +#ifndef _ASM_CPUMASK_H +#define _ASM_CPUMASK_H + +#include <asm-generic/cpumask.h> + +#endif /* _ASM_CPUMASK_H */ diff --git a/arch/frv/include/asm/cputime.h b/arch/frv/include/asm/cputime.h new file mode 100644 index 00000000000..f6c373ad2b8 --- /dev/null +++ b/arch/frv/include/asm/cputime.h @@ -0,0 +1,6 @@ +#ifndef _ASM_CPUTIME_H +#define _ASM_CPUTIME_H + +#include <asm-generic/cputime.h> + +#endif /* _ASM_CPUTIME_H */ diff --git a/arch/frv/include/asm/current.h b/arch/frv/include/asm/current.h new file mode 100644 index 00000000000..86b027491b0 --- /dev/null +++ b/arch/frv/include/asm/current.h @@ -0,0 +1,30 @@ +/* current.h: FRV current task pointer + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_CURRENT_H +#define _ASM_CURRENT_H + +#ifndef __ASSEMBLY__ + +/* + * dedicate GR29 to keeping the current task pointer + */ +register struct task_struct *current asm("gr29"); + +#define get_current() current + +#else + +#define CURRENT gr29 + +#endif + +#endif /* _ASM_CURRENT_H */ diff --git a/arch/frv/include/asm/delay.h b/arch/frv/include/asm/delay.h new file mode 100644 index 00000000000..597b4ebf03b --- /dev/null +++ b/arch/frv/include/asm/delay.h @@ -0,0 +1,50 @@ +/* delay.h: FRV delay code + * + * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_DELAY_H +#define _ASM_DELAY_H + +#include <asm/param.h> +#include <asm/timer-regs.h> + +/* + * delay loop - runs at __core_clock_speed_HZ / 2 [there are 2 insns in the loop] + */ +extern unsigned long __delay_loops_MHz; + +static inline void __delay(unsigned long loops) +{ + asm volatile("1: subicc %0,#1,%0,icc0 \n" + " bnc icc0,#2,1b \n" + : "=r" (loops) + : "0" (loops) + : "icc0" + ); +} + +/* + * Use only for very small delays ( < 1 msec). Should probably use a + * lookup table, really, as the multiplications take much too long with + * short delays. This is a "reasonable" implementation, though (and the + * first constant multiplications gets optimized away if the delay is + * a constant) + */ + +extern unsigned long loops_per_jiffy; + +static inline void udelay(unsigned long usecs) +{ + __delay(usecs * __delay_loops_MHz); +} + +#define ndelay(n) udelay((n) * 5) + +#endif /* _ASM_DELAY_H */ diff --git a/arch/frv/include/asm/device.h b/arch/frv/include/asm/device.h new file mode 100644 index 00000000000..d8f9872b0e2 --- /dev/null +++ b/arch/frv/include/asm/device.h @@ -0,0 +1,7 @@ +/* + * Arch specific extensions to struct device + * + * This file is released under the GPLv2 + */ +#include <asm-generic/device.h> + diff --git a/arch/frv/include/asm/div64.h b/arch/frv/include/asm/div64.h new file mode 100644 index 00000000000..6cd978cefb2 --- /dev/null +++ b/arch/frv/include/asm/div64.h @@ -0,0 +1 @@ +#include <asm-generic/div64.h> diff --git a/arch/frv/include/asm/dm9000.h b/arch/frv/include/asm/dm9000.h new file mode 100644 index 00000000000..f6f48fd9ec6 --- /dev/null +++ b/arch/frv/include/asm/dm9000.h @@ -0,0 +1,37 @@ +/* dm9000.h: Davicom DM9000 adapter configuration + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_DM9000_H +#define _ASM_DM9000_H + +#include <asm/mb-regs.h> + +#define DM9000_ARCH_IOBASE (__region_CS6 + 0x300) +#define DM9000_ARCH_IRQ IRQ_CPU_EXTERNAL3 /* XIRQ #3 (shared with FPGA) */ +#undef DM9000_ARCH_IRQ_ACTLOW /* IRQ pin active high */ +#define DM9000_ARCH_BUS_INFO "CS6#+0x300" /* bus info for ethtool */ + +#undef __is_PCI_IO +#define __is_PCI_IO(addr) 0 /* not PCI */ + +#undef inl +#define inl(addr) \ +({ \ + unsigned long __ioaddr = (unsigned long) addr; \ + uint32_t x = readl(__ioaddr); \ + ((x & 0xff) << 24) | ((x & 0xff00) << 8) | ((x >> 8) & 0xff00) | ((x >> 24) & 0xff); \ +}) + +#undef insl +#define insl(a,b,l) __insl(a,b,l,0) /* don't byte-swap */ + + +#endif /* _ASM_DM9000_H */ diff --git a/arch/frv/include/asm/dma-mapping.h b/arch/frv/include/asm/dma-mapping.h new file mode 100644 index 00000000000..b2898877c07 --- /dev/null +++ b/arch/frv/include/asm/dma-mapping.h @@ -0,0 +1,174 @@ +#ifndef _ASM_DMA_MAPPING_H +#define _ASM_DMA_MAPPING_H + +#include <linux/device.h> +#include <asm/cache.h> +#include <asm/cacheflush.h> +#include <asm/scatterlist.h> +#include <asm/io.h> + +#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f) +#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h) + +extern unsigned long __nongprelbss dma_coherent_mem_start; +extern unsigned long __nongprelbss dma_coherent_mem_end; + +void *dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t gfp); +void dma_free_coherent(struct device *dev, size_t size, void *vaddr, dma_addr_t dma_handle); + +/* + * Map a single buffer of the indicated size for DMA in streaming mode. + * The 32-bit bus address to use is returned. + * + * Once the device is given the dma address, the device owns this memory + * until either pci_unmap_single or pci_dma_sync_single is performed. + */ +extern dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size, + enum dma_data_direction direction); + +/* + * Unmap a single streaming mode DMA translation. The dma_addr and size + * must match what was provided for in a previous pci_map_single call. All + * other usages are undefined. + * + * After this call, reads by the cpu to the buffer are guarenteed to see + * whatever the device wrote there. + */ +static inline +void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, + enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); +} + +/* + * Map a set of buffers described by scatterlist in streaming + * mode for DMA. This is the scather-gather version of the + * above pci_map_single interface. Here the scatter gather list + * elements are each tagged with the appropriate dma address + * and length. They are obtained via sg_dma_{address,length}(SG). + * + * NOTE: An implementation may be able to use a smaller number of + * DMA address/length pairs than there are SG table elements. + * (for example via virtual mapping capabilities) + * The routine returns the number of addr/length pairs actually + * used, at most nents. + * + * Device ownership issues as mentioned above for pci_map_single are + * the same here. + */ +extern int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, + enum dma_data_direction direction); + +/* + * Unmap a set of streaming mode DMA translations. + * Again, cpu read rules concerning calls here are the same as for + * pci_unmap_single() above. + */ +static inline +void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries, + enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); +} + +extern +dma_addr_t dma_map_page(struct device *dev, struct page *page, unsigned long offset, + size_t size, enum dma_data_direction direction); + +static inline +void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size, + enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); +} + + +static inline +void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size, + enum dma_data_direction direction) +{ +} + +static inline +void dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, size_t size, + enum dma_data_direction direction) +{ + flush_write_buffers(); +} + +static inline +void dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle, + unsigned long offset, size_t size, + enum dma_data_direction direction) +{ +} + +static inline +void dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle, + unsigned long offset, size_t size, + enum dma_data_direction direction) +{ + flush_write_buffers(); +} + +static inline +void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems, + enum dma_data_direction direction) +{ +} + +static inline +void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems, + enum dma_data_direction direction) +{ + flush_write_buffers(); +} + +static inline +int dma_mapping_error(struct device *dev, dma_addr_t dma_addr) +{ + return 0; +} + +static inline +int dma_supported(struct device *dev, u64 mask) +{ + /* + * we fall back to GFP_DMA when the mask isn't all 1s, + * so we can't guarantee allocations that must be + * within a tighter range than GFP_DMA.. + */ + if (mask < 0x00ffffff) + return 0; + + return 1; +} + +static inline +int dma_set_mask(struct device *dev, u64 mask) +{ + if (!dev->dma_mask || !dma_supported(dev, mask)) + return -EIO; + + *dev->dma_mask = mask; + + return 0; +} + +static inline +int dma_get_cache_alignment(void) +{ + return 1 << L1_CACHE_SHIFT; +} + +#define dma_is_consistent(d, h) (1) + +static inline +void dma_cache_sync(struct device *dev, void *vaddr, size_t size, + enum dma_data_direction direction) +{ + flush_write_buffers(); +} + +#endif /* _ASM_DMA_MAPPING_H */ diff --git a/arch/frv/include/asm/dma.h b/arch/frv/include/asm/dma.h new file mode 100644 index 00000000000..683c47d48a5 --- /dev/null +++ b/arch/frv/include/asm/dma.h @@ -0,0 +1,125 @@ +/* dma.h: FRV DMA controller management + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_DMA_H +#define _ASM_DMA_H + +//#define DMA_DEBUG 1 + +#include <linux/interrupt.h> + +#undef MAX_DMA_CHANNELS /* don't use kernel/dma.c */ + +/* under 2.4 this is actually needed by the new bootmem allocator */ +#define MAX_DMA_ADDRESS PAGE_OFFSET + +/* + * FRV DMA controller management + */ +typedef irqreturn_t (*dma_irq_handler_t)(int dmachan, unsigned long cstr, void *data); + +extern void frv_dma_init(void); + +extern int frv_dma_open(const char *devname, + unsigned long dmamask, + int dmacap, + dma_irq_handler_t handler, + unsigned long irq_flags, + void *data); + +/* channels required */ +#define FRV_DMA_MASK_ANY ULONG_MAX /* any channel */ + +/* capabilities required */ +#define FRV_DMA_CAP_DREQ 0x01 /* DMA request pin */ +#define FRV_DMA_CAP_DACK 0x02 /* DMA ACK pin */ +#define FRV_DMA_CAP_DONE 0x04 /* DMA done pin */ + +extern void frv_dma_close(int dma); + +extern void frv_dma_config(int dma, unsigned long ccfr, unsigned long cctr, unsigned long apr); + +extern void frv_dma_start(int dma, + unsigned long sba, unsigned long dba, + unsigned long pix, unsigned long six, unsigned long bcl); + +extern void frv_dma_restart_circular(int dma, unsigned long six); + +extern void frv_dma_stop(int dma); + +extern int is_frv_dma_interrupting(int dma); + +extern void frv_dma_dump(int dma); + +extern void frv_dma_status_clear(int dma); + +#define FRV_DMA_NCHANS 8 +#define FRV_DMA_4CHANS 4 +#define FRV_DMA_8CHANS 8 + +#define DMAC_CCFRx 0x00 /* channel configuration reg */ +#define DMAC_CCFRx_CM_SHIFT 16 +#define DMAC_CCFRx_CM_DA 0x00000000 +#define DMAC_CCFRx_CM_SCA 0x00010000 +#define DMAC_CCFRx_CM_DCA 0x00020000 +#define DMAC_CCFRx_CM_2D 0x00030000 +#define DMAC_CCFRx_ATS_SHIFT 8 +#define DMAC_CCFRx_RS_INTERN 0x00000000 +#define DMAC_CCFRx_RS_EXTERN 0x00000001 +#define DMAC_CCFRx_RS_SHIFT 0 + +#define DMAC_CSTRx 0x08 /* channel status reg */ +#define DMAC_CSTRx_FS 0x0000003f +#define DMAC_CSTRx_NE 0x00000100 +#define DMAC_CSTRx_FED 0x00000200 +#define DMAC_CSTRx_WER 0x00000800 +#define DMAC_CSTRx_RER 0x00001000 +#define DMAC_CSTRx_CE 0x00002000 +#define DMAC_CSTRx_INT 0x00800000 +#define DMAC_CSTRx_BUSY 0x80000000 + +#define DMAC_CCTRx 0x10 /* channel control reg */ +#define DMAC_CCTRx_DSIZ_1 0x00000000 +#define DMAC_CCTRx_DSIZ_2 0x00000001 +#define DMAC_CCTRx_DSIZ_4 0x00000002 +#define DMAC_CCTRx_DSIZ_32 0x00000005 +#define DMAC_CCTRx_DAU_HOLD 0x00000000 +#define DMAC_CCTRx_DAU_INC 0x00000010 +#define DMAC_CCTRx_DAU_DEC 0x00000020 +#define DMAC_CCTRx_SSIZ_1 0x00000000 +#define DMAC_CCTRx_SSIZ_2 0x00000100 +#define DMAC_CCTRx_SSIZ_4 0x00000200 +#define DMAC_CCTRx_SSIZ_32 0x00000500 +#define DMAC_CCTRx_SAU_HOLD 0x00000000 +#define DMAC_CCTRx_SAU_INC 0x00001000 +#define DMAC_CCTRx_SAU_DEC 0x00002000 +#define DMAC_CCTRx_FC 0x08000000 +#define DMAC_CCTRx_ICE 0x10000000 +#define DMAC_CCTRx_IE 0x40000000 +#define DMAC_CCTRx_ACT 0x80000000 + +#define DMAC_SBAx 0x18 /* source base address reg */ +#define DMAC_DBAx 0x20 /* data base address reg */ +#define DMAC_PIXx 0x28 /* primary index reg */ +#define DMAC_SIXx 0x30 /* secondary index reg */ +#define DMAC_BCLx 0x38 /* byte count limit reg */ +#define DMAC_APRx 0x40 /* alternate pointer reg */ + +/* + * required for PCI + MODULES + */ +#ifdef CONFIG_PCI +extern int isa_dma_bridge_buggy; +#else +#define isa_dma_bridge_buggy (0) +#endif + +#endif /* _ASM_DMA_H */ diff --git a/arch/frv/include/asm/elf.h b/arch/frv/include/asm/elf.h new file mode 100644 index 00000000000..7279ec07d62 --- /dev/null +++ b/arch/frv/include/asm/elf.h @@ -0,0 +1,142 @@ +/* elf.h: FR-V ELF definitions + * + * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * - Derived from include/asm-m68knommu/elf.h + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef __ASM_ELF_H +#define __ASM_ELF_H + +#include <asm/ptrace.h> +#include <asm/user.h> + +struct elf32_hdr; + +/* + * ELF header e_flags defines. + */ +#define EF_FRV_GPR_MASK 0x00000003 /* mask for # of gprs */ +#define EF_FRV_GPR32 0x00000001 /* Only uses GR on 32-register */ +#define EF_FRV_GPR64 0x00000002 /* Only uses GR on 64-register */ +#define EF_FRV_FPR_MASK 0x0000000c /* mask for # of fprs */ +#define EF_FRV_FPR32 0x00000004 /* Only uses FR on 32-register */ +#define EF_FRV_FPR64 0x00000008 /* Only uses FR on 64-register */ +#define EF_FRV_FPR_NONE 0x0000000C /* Uses software floating-point */ +#define EF_FRV_DWORD_MASK 0x00000030 /* mask for dword support */ +#define EF_FRV_DWORD_YES 0x00000010 /* Assumes stack aligned to 8-byte boundaries. */ +#define EF_FRV_DWORD_NO 0x00000020 /* Assumes stack aligned to 4-byte boundaries. */ +#define EF_FRV_DOUBLE 0x00000040 /* Uses double instructions. */ +#define EF_FRV_MEDIA 0x00000080 /* Uses media instructions. */ +#define EF_FRV_PIC 0x00000100 /* Uses position independent code. */ +#define EF_FRV_NON_PIC_RELOCS 0x00000200 /* Does not use position Independent code. */ +#define EF_FRV_MULADD 0x00000400 /* -mmuladd */ +#define EF_FRV_BIGPIC 0x00000800 /* -fPIC */ +#define EF_FRV_LIBPIC 0x00001000 /* -mlibrary-pic */ +#define EF_FRV_G0 0x00002000 /* -G 0, no small data ptr */ +#define EF_FRV_NOPACK 0x00004000 /* -mnopack */ +#define EF_FRV_FDPIC 0x00008000 /* -mfdpic */ +#define EF_FRV_CPU_MASK 0xff000000 /* specific cpu bits */ +#define EF_FRV_CPU_GENERIC 0x00000000 /* Set CPU type is FR-V */ +#define EF_FRV_CPU_FR500 0x01000000 /* Set CPU type is FR500 */ +#define EF_FRV_CPU_FR300 0x02000000 /* Set CPU type is FR300 */ +#define EF_FRV_CPU_SIMPLE 0x03000000 /* SIMPLE */ +#define EF_FRV_CPU_TOMCAT 0x04000000 /* Tomcat, FR500 prototype */ +#define EF_FRV_CPU_FR400 0x05000000 /* Set CPU type is FR400 */ +#define EF_FRV_CPU_FR550 0x06000000 /* Set CPU type is FR550 */ +#define EF_FRV_CPU_FR405 0x07000000 /* Set CPU type is FR405 */ +#define EF_FRV_CPU_FR450 0x08000000 /* Set CPU type is FR450 */ + +/* + * FR-V ELF relocation types + */ + + +/* + * ELF register definitions.. + */ +typedef unsigned long elf_greg_t; + +#define ELF_NGREG (sizeof(struct pt_regs) / sizeof(elf_greg_t)) +typedef elf_greg_t elf_gregset_t[ELF_NGREG]; + +typedef struct user_fpmedia_regs elf_fpregset_t; + +/* + * This is used to ensure we don't load something for the wrong architecture. + */ +extern int elf_check_arch(const struct elf32_hdr *hdr); + +#define elf_check_fdpic(x) ((x)->e_flags & EF_FRV_FDPIC && !((x)->e_flags & EF_FRV_NON_PIC_RELOCS)) +#define elf_check_const_displacement(x) ((x)->e_flags & EF_FRV_PIC) + +/* + * These are used to set parameters in the core dumps. + */ +#define ELF_CLASS ELFCLASS32 +#define ELF_DATA ELFDATA2MSB +#define ELF_ARCH EM_FRV + +#define ELF_PLAT_INIT(_r) \ +do { \ + __kernel_frame0_ptr->gr16 = 0; \ + __kernel_frame0_ptr->gr17 = 0; \ + __kernel_frame0_ptr->gr18 = 0; \ + __kernel_frame0_ptr->gr19 = 0; \ + __kernel_frame0_ptr->gr20 = 0; \ + __kernel_frame0_ptr->gr21 = 0; \ + __kernel_frame0_ptr->gr22 = 0; \ + __kernel_frame0_ptr->gr23 = 0; \ + __kernel_frame0_ptr->gr24 = 0; \ + __kernel_frame0_ptr->gr25 = 0; \ + __kernel_frame0_ptr->gr26 = 0; \ + __kernel_frame0_ptr->gr27 = 0; \ + __kernel_frame0_ptr->gr29 = 0; \ +} while(0) + +#define ELF_FDPIC_PLAT_INIT(_regs, _exec_map_addr, _interp_map_addr, _dynamic_addr) \ +do { \ + __kernel_frame0_ptr->gr16 = _exec_map_addr; \ + __kernel_frame0_ptr->gr17 = _interp_map_addr; \ + __kernel_frame0_ptr->gr18 = _dynamic_addr; \ + __kernel_frame0_ptr->gr19 = 0; \ + __kernel_frame0_ptr->gr20 = 0; \ + __kernel_frame0_ptr->gr21 = 0; \ + __kernel_frame0_ptr->gr22 = 0; \ + __kernel_frame0_ptr->gr23 = 0; \ + __kernel_frame0_ptr->gr24 = 0; \ + __kernel_frame0_ptr->gr25 = 0; \ + __kernel_frame0_ptr->gr26 = 0; \ + __kernel_frame0_ptr->gr27 = 0; \ + __kernel_frame0_ptr->gr29 = 0; \ +} while(0) + +#define USE_ELF_CORE_DUMP +#define ELF_FDPIC_CORE_EFLAGS EF_FRV_FDPIC +#define ELF_EXEC_PAGESIZE 16384 + +/* This is the location that an ET_DYN program is loaded if exec'ed. Typical + use of this is to invoke "./ld.so someprog" to test out a new version of + the loader. We need to make sure that it is out of the way of the program + that it will "exec", and that there is sufficient room for the brk. */ + +#define ELF_ET_DYN_BASE 0x08000000UL + +/* This yields a mask that user programs can use to figure out what + instruction set this cpu supports. */ + +#define ELF_HWCAP (0) + +/* This yields a string that ld.so will use to load implementation + specific libraries for optimization. This is more specific in + intent than poking at uname or /proc/cpuinfo. */ + +#define ELF_PLATFORM (NULL) + +#define SET_PERSONALITY(ex) set_personality(PER_LINUX) + +#endif diff --git a/arch/frv/include/asm/emergency-restart.h b/arch/frv/include/asm/emergency-restart.h new file mode 100644 index 00000000000..108d8c48e42 --- /dev/null +++ b/arch/frv/include/asm/emergency-restart.h @@ -0,0 +1,6 @@ +#ifndef _ASM_EMERGENCY_RESTART_H +#define _ASM_EMERGENCY_RESTART_H + +#include <asm-generic/emergency-restart.h> + +#endif /* _ASM_EMERGENCY_RESTART_H */ diff --git a/arch/frv/include/asm/errno.h b/arch/frv/include/asm/errno.h new file mode 100644 index 00000000000..d010795ceef --- /dev/null +++ b/arch/frv/include/asm/errno.h @@ -0,0 +1,7 @@ +#ifndef _ASM_ERRNO_H +#define _ASM_ERRNO_H + +#include <asm-generic/errno.h> + +#endif /* _ASM_ERRNO_H */ + diff --git a/arch/frv/include/asm/fb.h b/arch/frv/include/asm/fb.h new file mode 100644 index 00000000000..c7df3803099 --- /dev/null +++ b/arch/frv/include/asm/fb.h @@ -0,0 +1,12 @@ +#ifndef _ASM_FB_H_ +#define _ASM_FB_H_ +#include <linux/fb.h> + +#define fb_pgprotect(...) do {} while (0) + +static inline int fb_is_primary_device(struct fb_info *info) +{ + return 0; +} + +#endif /* _ASM_FB_H_ */ diff --git a/arch/frv/include/asm/fcntl.h b/arch/frv/include/asm/fcntl.h new file mode 100644 index 00000000000..46ab12db573 --- /dev/null +++ b/arch/frv/include/asm/fcntl.h @@ -0,0 +1 @@ +#include <asm-generic/fcntl.h> diff --git a/arch/frv/include/asm/fpu.h b/arch/frv/include/asm/fpu.h new file mode 100644 index 00000000000..d73c60b5664 --- /dev/null +++ b/arch/frv/include/asm/fpu.h @@ -0,0 +1,11 @@ +#ifndef __ASM_FPU_H +#define __ASM_FPU_H + + +/* + * MAX floating point unit state size (FSAVE/FRESTORE) + */ + +#define kernel_fpu_end() do { asm volatile("bar":::"memory"); preempt_enable(); } while(0) + +#endif /* __ASM_FPU_H */ diff --git a/arch/frv/include/asm/ftrace.h b/arch/frv/include/asm/ftrace.h new file mode 100644 index 00000000000..40a8c178f10 --- /dev/null +++ b/arch/frv/include/asm/ftrace.h @@ -0,0 +1 @@ +/* empty */ diff --git a/arch/frv/include/asm/futex.h b/arch/frv/include/asm/futex.h new file mode 100644 index 00000000000..08b3d1da358 --- /dev/null +++ b/arch/frv/include/asm/futex.h @@ -0,0 +1,19 @@ +#ifndef _ASM_FUTEX_H +#define _ASM_FUTEX_H + +#ifdef __KERNEL__ + +#include <linux/futex.h> +#include <asm/errno.h> +#include <asm/uaccess.h> + +extern int futex_atomic_op_inuser(int encoded_op, int __user *uaddr); + +static inline int +futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval) +{ + return -ENOSYS; +} + +#endif +#endif diff --git a/arch/frv/include/asm/gdb-stub.h b/arch/frv/include/asm/gdb-stub.h new file mode 100644 index 00000000000..24f9738670b --- /dev/null +++ b/arch/frv/include/asm/gdb-stub.h @@ -0,0 +1,140 @@ +/* gdb-stub.h: FRV GDB stub + * + * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * - Derived from asm-mips/gdb-stub.h (c) 1995 Andreas Busse + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef __ASM_GDB_STUB_H +#define __ASM_GDB_STUB_H + +#undef GDBSTUB_DEBUG_PROTOCOL + +#include <asm/ptrace.h> + +/* + * important register numbers in GDB protocol + * - GR0, GR1, GR2, GR3, GR4, GR5, GR6, GR7, + * - GR8, GR9, GR10, GR11, GR12, GR13, GR14, GR15, + * - GR16, GR17, GR18, GR19, GR20, GR21, GR22, GR23, + * - GR24, GR25, GR26, GR27, GR28, GR29, GR30, GR31, + * - GR32, GR33, GR34, GR35, GR36, GR37, GR38, GR39, + * - GR40, GR41, GR42, GR43, GR44, GR45, GR46, GR47, + * - GR48, GR49, GR50, GR51, GR52, GR53, GR54, GR55, + * - GR56, GR57, GR58, GR59, GR60, GR61, GR62, GR63, + * - FR0, FR1, FR2, FR3, FR4, FR5, FR6, FR7, + * - FR8, FR9, FR10, FR11, FR12, FR13, FR14, FR15, + * - FR16, FR17, FR18, FR19, FR20, FR21, FR22, FR23, + * - FR24, FR25, FR26, FR27, FR28, FR29, FR30, FR31, + * - FR32, FR33, FR34, FR35, FR36, FR37, FR38, FR39, + * - FR40, FR41, FR42, FR43, FR44, FR45, FR46, FR47, + * - FR48, FR49, FR50, FR51, FR52, FR53, FR54, FR55, + * - FR56, FR57, FR58, FR59, FR60, FR61, FR62, FR63, + * - PC, PSR, CCR, CCCR, + * - _X132, _X133, _X134 + * - TBR, BRR, DBAR0, DBAR1, DBAR2, DBAR3, + * - SCR0, SCR1, SCR2, SCR3, + * - LR, LCR, + * - IACC0H, IACC0L, + * - FSR0, + * - ACC0, ACC1, ACC2, ACC3, ACC4, ACC5, ACC6, ACC7, + * - ACCG0123, ACCG4567, + * - MSR0, MSR1, + * - GNER0, GNER1, + * - FNER0, FNER1, + */ +#define GDB_REG_GR(N) (N) +#define GDB_REG_FR(N) (64+(N)) +#define GDB_REG_PC 128 +#define GDB_REG_PSR 129 +#define GDB_REG_CCR 130 +#define GDB_REG_CCCR 131 +#define GDB_REG_TBR 135 +#define GDB_REG_BRR 136 +#define GDB_REG_DBAR(N) (137+(N)) +#define GDB_REG_SCR(N) (141+(N)) +#define GDB_REG_LR 145 +#define GDB_REG_LCR 146 +#define GDB_REG_FSR0 149 +#define GDB_REG_ACC(N) (150+(N)) +#define GDB_REG_ACCG(N) (158+(N)/4) +#define GDB_REG_MSR(N) (160+(N)) +#define GDB_REG_GNER(N) (162+(N)) +#define GDB_REG_FNER(N) (164+(N)) + +#define GDB_REG_SP GDB_REG_GR(1) +#define GDB_REG_FP GDB_REG_GR(2) + +#ifndef _LANGUAGE_ASSEMBLY + +/* + * Prototypes + */ +extern void show_registers_only(struct pt_regs *regs); + +extern void gdbstub_init(void); +extern void gdbstub(int type); +extern void gdbstub_exit(int status); + +extern void gdbstub_io_init(void); +extern void gdbstub_set_baud(unsigned baud); +extern int gdbstub_rx_char(unsigned char *_ch, int nonblock); +extern void gdbstub_tx_char(unsigned char ch); +extern void gdbstub_tx_flush(void); +extern void gdbstub_do_rx(void); + +extern asmlinkage void __debug_stub_init_break(void); +extern asmlinkage void __break_hijack_kernel_event(void); +extern asmlinkage void __break_hijack_kernel_event_breaks_here(void); +extern asmlinkage void start_kernel(void); + +extern asmlinkage void gdbstub_rx_handler(void); +extern asmlinkage void gdbstub_rx_irq(void); +extern asmlinkage void gdbstub_intercept(void); + +extern uint32_t __entry_usertrap_table[]; +extern uint32_t __entry_kerneltrap_table[]; + +extern volatile u8 gdbstub_rx_buffer[PAGE_SIZE]; +extern volatile u32 gdbstub_rx_inp; +extern volatile u32 gdbstub_rx_outp; +extern volatile u8 gdbstub_rx_overflow; +extern u8 gdbstub_rx_unget; + +extern void gdbstub_printk(const char *fmt, ...); +extern void debug_to_serial(const char *p, int n); +extern void console_set_baud(unsigned baud); + +#ifdef GDBSTUB_DEBUG_PROTOCOL +#define gdbstub_proto(FMT,...) gdbstub_printk(FMT,##__VA_ARGS__) +#else +#define gdbstub_proto(FMT,...) ({ 0; }) +#endif + +/* + * we dedicate GR31 to keeping a pointer to the gdbstub exception frame + * - gr31 is destroyed on entry to the gdbstub if !MMU + * - gr31 is saved in scr3 on entry to the gdbstub if in !MMU + */ +register struct frv_frame0 *__debug_frame0 asm("gr31"); + +#define __debug_frame (&__debug_frame0->regs) +#define __debug_user_context (&__debug_frame0->uc) +#define __debug_regs (&__debug_frame0->debug) +#define __debug_reg(X) ((unsigned long *) ((unsigned long) &__debug_frame0 + (X))) + +struct frv_debug_status { + unsigned long bpsr; + unsigned long dcr; + unsigned long brr; + unsigned long nmar; +}; + +extern struct frv_debug_status __debug_status; + +#endif /* _LANGUAGE_ASSEMBLY */ +#endif /* __ASM_GDB_STUB_H */ diff --git a/arch/frv/include/asm/gpio-regs.h b/arch/frv/include/asm/gpio-regs.h new file mode 100644 index 00000000000..9edf5d5d4d3 --- /dev/null +++ b/arch/frv/include/asm/gpio-regs.h @@ -0,0 +1,116 @@ +/* gpio-regs.h: on-chip general purpose I/O registers + * + * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_GPIO_REGS +#define _ASM_GPIO_REGS + +#define __reg(ADDR) (*(volatile unsigned long *)(ADDR)) + +#define __get_PDR() ({ __reg(0xfeff0400); }) +#define __set_PDR(V) do { __reg(0xfeff0400) = (V); mb(); } while(0) + +#define __get_GPDR() ({ __reg(0xfeff0408); }) +#define __set_GPDR(V) do { __reg(0xfeff0408) = (V); mb(); } while(0) + +#define __get_SIR() ({ __reg(0xfeff0410); }) +#define __set_SIR(V) do { __reg(0xfeff0410) = (V); mb(); } while(0) + +#define __get_SOR() ({ __reg(0xfeff0418); }) +#define __set_SOR(V) do { __reg(0xfeff0418) = (V); mb(); } while(0) + +#define __set_PDSR(V) do { __reg(0xfeff0420) = (V); mb(); } while(0) + +#define __set_PDCR(V) do { __reg(0xfeff0428) = (V); mb(); } while(0) + +#define __get_RSTR() ({ __reg(0xfeff0500); }) +#define __set_RSTR(V) do { __reg(0xfeff0500) = (V); mb(); } while(0) + + + +/* PDR definitions */ +#define PDR_GPIO_DATA(X) (1 << (X)) + +/* GPDR definitions */ +#define GPDR_INPUT 0 +#define GPDR_OUTPUT 1 +#define GPDR_DREQ0_BIT 0x00001000 +#define GPDR_DREQ1_BIT 0x00008000 +#define GPDR_DREQ2_BIT 0x00040000 +#define GPDR_DREQ3_BIT 0x00080000 +#define GPDR_DREQ4_BIT 0x00004000 +#define GPDR_DREQ5_BIT 0x00020000 +#define GPDR_DREQ6_BIT 0x00100000 +#define GPDR_DREQ7_BIT 0x00200000 +#define GPDR_DACK0_BIT 0x00002000 +#define GPDR_DACK1_BIT 0x00010000 +#define GPDR_DACK2_BIT 0x00100000 +#define GPDR_DACK3_BIT 0x00200000 +#define GPDR_DONE0_BIT 0x00004000 +#define GPDR_DONE1_BIT 0x00020000 +#define GPDR_GPIO_DIR(X,D) ((D) << (X)) + +/* SIR definitions */ +#define SIR_GPIO_INPUT 0 +#define SIR_DREQ7_INPUT 0x00200000 +#define SIR_DREQ6_INPUT 0x00100000 +#define SIR_DREQ3_INPUT 0x00080000 +#define SIR_DREQ2_INPUT 0x00040000 +#define SIR_DREQ5_INPUT 0x00020000 +#define SIR_DREQ1_INPUT 0x00008000 +#define SIR_DREQ4_INPUT 0x00004000 +#define SIR_DREQ0_INPUT 0x00001000 +#define SIR_RXD1_INPUT 0x00000400 +#define SIR_CTS0_INPUT 0x00000100 +#define SIR_RXD0_INPUT 0x00000040 +#define SIR_GATE1_INPUT 0x00000020 +#define SIR_GATE0_INPUT 0x00000010 +#define SIR_IRQ3_INPUT 0x00000008 +#define SIR_IRQ2_INPUT 0x00000004 +#define SIR_IRQ1_INPUT 0x00000002 +#define SIR_IRQ0_INPUT 0x00000001 +#define SIR_DREQ_BITS (SIR_DREQ0_INPUT | SIR_DREQ1_INPUT | \ + SIR_DREQ2_INPUT | SIR_DREQ3_INPUT | \ + SIR_DREQ4_INPUT | SIR_DREQ5_INPUT | \ + SIR_DREQ6_INPUT | SIR_DREQ7_INPUT) + +/* SOR definitions */ +#define SOR_GPIO_OUTPUT 0 +#define SOR_DACK3_OUTPUT 0x00200000 +#define SOR_DACK2_OUTPUT 0x00100000 +#define SOR_DONE1_OUTPUT 0x00020000 +#define SOR_DACK1_OUTPUT 0x00010000 +#define SOR_DONE0_OUTPUT 0x00004000 +#define SOR_DACK0_OUTPUT 0x00002000 +#define SOR_TXD1_OUTPUT 0x00000800 +#define SOR_RTS0_OUTPUT 0x00000200 +#define SOR_TXD0_OUTPUT 0x00000080 +#define SOR_TOUT1_OUTPUT 0x00000020 +#define SOR_TOUT0_OUTPUT 0x00000010 +#define SOR_DONE_BITS (SOR_DONE0_OUTPUT | SOR_DONE1_OUTPUT) +#define SOR_DACK_BITS (SOR_DACK0_OUTPUT | SOR_DACK1_OUTPUT | \ + SOR_DACK2_OUTPUT | SOR_DACK3_OUTPUT) + +/* PDSR definitions */ +#define PDSR_UNCHANGED 0 +#define PDSR_SET_BIT(X) (1 << (X)) + +/* PDCR definitions */ +#define PDCR_UNCHANGED 0 +#define PDCR_CLEAR_BIT(X) (1 << (X)) + +/* RSTR definitions */ +/* Read Only */ +#define RSTR_POWERON 0x00000400 +#define RSTR_SOFTRESET_STATUS 0x00000100 +/* Write Only */ +#define RSTR_SOFTRESET 0x00000001 + +#endif /* _ASM_GPIO_REGS */ diff --git a/arch/frv/include/asm/hardirq.h b/arch/frv/include/asm/hardirq.h new file mode 100644 index 00000000000..fc47515822a --- /dev/null +++ b/arch/frv/include/asm/hardirq.h @@ -0,0 +1,35 @@ +/* hardirq.h: FRV hardware IRQ management + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef __ASM_HARDIRQ_H +#define __ASM_HARDIRQ_H + +#include <linux/threads.h> +#include <linux/irq.h> + +typedef struct { + unsigned int __softirq_pending; + unsigned long idle_timestamp; +} ____cacheline_aligned irq_cpustat_t; + +#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */ + +#ifdef CONFIG_SMP +#error SMP not available on FR-V +#endif /* CONFIG_SMP */ + +extern atomic_t irq_err_count; +static inline void ack_bad_irq(int irq) +{ + atomic_inc(&irq_err_count); +} + +#endif diff --git a/arch/frv/include/asm/highmem.h b/arch/frv/include/asm/highmem.h new file mode 100644 index 00000000000..68e4677fb9e --- /dev/null +++ b/arch/frv/include/asm/highmem.h @@ -0,0 +1,182 @@ +/* highmem.h: virtual kernel memory mappings for high memory + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * - Derived from include/asm-i386/highmem.h + * + * See Documentation/frv/mmu-layout.txt for more information. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_HIGHMEM_H +#define _ASM_HIGHMEM_H + +#ifdef __KERNEL__ + +#include <linux/init.h> +#include <linux/highmem.h> +#include <asm/mem-layout.h> +#include <asm/spr-regs.h> +#include <asm/mb-regs.h> + +#define NR_TLB_LINES 64 /* number of lines in the TLB */ + +#ifndef __ASSEMBLY__ + +#include <linux/interrupt.h> +#include <asm/kmap_types.h> +#include <asm/pgtable.h> + +#ifdef CONFIG_DEBUG_HIGHMEM +#define HIGHMEM_DEBUG 1 +#else +#define HIGHMEM_DEBUG 0 +#endif + +/* declarations for highmem.c */ +extern unsigned long highstart_pfn, highend_pfn; + +#define kmap_prot PAGE_KERNEL +#define kmap_pte ______kmap_pte_in_TLB +extern pte_t *pkmap_page_table; + +#define flush_cache_kmaps() do { } while (0) + +/* + * Right now we initialize only a single pte table. It can be extended + * easily, subsequent pte tables have to be allocated in one physical + * chunk of RAM. + */ +#define LAST_PKMAP PTRS_PER_PTE +#define LAST_PKMAP_MASK (LAST_PKMAP - 1) +#define PKMAP_NR(virt) ((virt - PKMAP_BASE) >> PAGE_SHIFT) +#define PKMAP_ADDR(nr) (PKMAP_BASE + ((nr) << PAGE_SHIFT)) + +extern void *kmap_high(struct page *page); +extern void kunmap_high(struct page *page); + +extern void *kmap(struct page *page); +extern void kunmap(struct page *page); + +extern struct page *kmap_atomic_to_page(void *ptr); + +#endif /* !__ASSEMBLY__ */ + +/* + * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap + * gives a more generic (and caching) interface. But kmap_atomic can + * be used in IRQ contexts, so in some (very limited) cases we need + * it. + */ +#define KMAP_ATOMIC_CACHE_DAMR 8 + +#ifndef __ASSEMBLY__ + +#define __kmap_atomic_primary(type, paddr, ampr) \ +({ \ + unsigned long damlr, dampr; \ + \ + dampr = paddr | xAMPRx_L | xAMPRx_M | xAMPRx_S | xAMPRx_SS_16Kb | xAMPRx_V; \ + \ + if (type != __KM_CACHE) \ + asm volatile("movgs %0,dampr"#ampr :: "r"(dampr) : "memory"); \ + else \ + asm volatile("movgs %0,iampr"#ampr"\n" \ + "movgs %0,dampr"#ampr"\n" \ + :: "r"(dampr) : "memory" \ + ); \ + \ + asm("movsg damlr"#ampr",%0" : "=r"(damlr)); \ + \ + /*printk("DAMR"#ampr": PRIM sl=%d L=%08lx P=%08lx\n", type, damlr, dampr);*/ \ + \ + (void *) damlr; \ +}) + +#define __kmap_atomic_secondary(slot, paddr) \ +({ \ + unsigned long damlr = KMAP_ATOMIC_SECONDARY_FRAME + (slot) * PAGE_SIZE; \ + unsigned long dampr = paddr | xAMPRx_L | xAMPRx_M | xAMPRx_S | xAMPRx_SS_16Kb | xAMPRx_V; \ + \ + asm volatile("movgs %0,tplr \n" \ + "movgs %1,tppr \n" \ + "tlbpr %0,gr0,#2,#1" \ + : : "r"(damlr), "r"(dampr) : "memory"); \ + \ + /*printk("TLB: SECN sl=%d L=%08lx P=%08lx\n", slot, damlr, dampr);*/ \ + \ + (void *) damlr; \ +}) + +static inline void *kmap_atomic(struct page *page, enum km_type type) +{ + unsigned long paddr; + + pagefault_disable(); + debug_kmap_atomic(type); + paddr = page_to_phys(page); + + switch (type) { + case 0: return __kmap_atomic_primary(0, paddr, 2); + case 1: return __kmap_atomic_primary(1, paddr, 3); + case 2: return __kmap_atomic_primary(2, paddr, 4); + case 3: return __kmap_atomic_primary(3, paddr, 5); + case 4: return __kmap_atomic_primary(4, paddr, 6); + case 5: return __kmap_atomic_primary(5, paddr, 7); + case 6: return __kmap_atomic_primary(6, paddr, 8); + case 7: return __kmap_atomic_primary(7, paddr, 9); + case 8: return __kmap_atomic_primary(8, paddr, 10); + + case 9 ... 9 + NR_TLB_LINES - 1: + return __kmap_atomic_secondary(type - 9, paddr); + + default: + BUG(); + return NULL; + } +} + +#define __kunmap_atomic_primary(type, ampr) \ +do { \ + asm volatile("movgs gr0,dampr"#ampr"\n" ::: "memory"); \ + if (type == __KM_CACHE) \ + asm volatile("movgs gr0,iampr"#ampr"\n" ::: "memory"); \ +} while(0) + +#define __kunmap_atomic_secondary(slot, vaddr) \ +do { \ + asm volatile("tlbpr %0,gr0,#4,#1" : : "r"(vaddr) : "memory"); \ +} while(0) + +static inline void kunmap_atomic(void *kvaddr, enum km_type type) +{ + switch (type) { + case 0: __kunmap_atomic_primary(0, 2); break; + case 1: __kunmap_atomic_primary(1, 3); break; + case 2: __kunmap_atomic_primary(2, 4); break; + case 3: __kunmap_atomic_primary(3, 5); break; + case 4: __kunmap_atomic_primary(4, 6); break; + case 5: __kunmap_atomic_primary(5, 7); break; + case 6: __kunmap_atomic_primary(6, 8); break; + case 7: __kunmap_atomic_primary(7, 9); break; + case 8: __kunmap_atomic_primary(8, 10); break; + + case 9 ... 9 + NR_TLB_LINES - 1: + __kunmap_atomic_secondary(type - 9, kvaddr); + break; + + default: + BUG(); + } + pagefault_enable(); +} + +#endif /* !__ASSEMBLY__ */ + +#endif /* __KERNEL__ */ + +#endif /* _ASM_HIGHMEM_H */ diff --git a/arch/frv/include/asm/hw_irq.h b/arch/frv/include/asm/hw_irq.h new file mode 100644 index 00000000000..522ad37923d --- /dev/null +++ b/arch/frv/include/asm/hw_irq.h @@ -0,0 +1,16 @@ +/* hw_irq.h: FR-V specific h/w IRQ stuff + * + * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_HW_IRQ_H +#define _ASM_HW_IRQ_H + + +#endif /* _ASM_HW_IRQ_H */ diff --git a/arch/frv/include/asm/init.h b/arch/frv/include/asm/init.h new file mode 100644 index 00000000000..8b15838de21 --- /dev/null +++ b/arch/frv/include/asm/init.h @@ -0,0 +1,12 @@ +#ifndef _ASM_INIT_H +#define _ASM_INIT_H + +#define __init __attribute__ ((__section__ (".text.init"))) +#define __initdata __attribute__ ((__section__ (".data.init"))) +/* For assembly routines */ +#define __INIT .section ".text.init",#alloc,#execinstr +#define __FINIT .previous +#define __INITDATA .section ".data.init",#alloc,#write + +#endif + diff --git a/arch/frv/include/asm/io.h b/arch/frv/include/asm/io.h new file mode 100644 index 00000000000..ca7475e73b5 --- /dev/null +++ b/arch/frv/include/asm/io.h @@ -0,0 +1,392 @@ +/* io.h: FRV I/O operations + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * This gets interesting when talking to the PCI bus - the CPU is in big endian + * mode, the PCI bus is little endian and the hardware in the middle can do + * byte swapping + */ +#ifndef _ASM_IO_H +#define _ASM_IO_H + +#ifdef __KERNEL__ + +#include <linux/types.h> +#include <asm/virtconvert.h> +#include <asm/string.h> +#include <asm/mb-regs.h> +#include <linux/delay.h> + +/* + * swap functions are sometimes needed to interface little-endian hardware + */ + +static inline unsigned short _swapw(unsigned short v) +{ + return ((v << 8) | (v >> 8)); +} + +static inline unsigned long _swapl(unsigned long v) +{ + return ((v << 24) | ((v & 0xff00) << 8) | ((v & 0xff0000) >> 8) | (v >> 24)); +} + +//#define __iormb() asm volatile("membar") +//#define __iowmb() asm volatile("membar") + +#define __raw_readb __builtin_read8 +#define __raw_readw __builtin_read16 +#define __raw_readl __builtin_read32 + +#define __raw_writeb(datum, addr) __builtin_write8(addr, datum) +#define __raw_writew(datum, addr) __builtin_write16(addr, datum) +#define __raw_writel(datum, addr) __builtin_write32(addr, datum) + +static inline void io_outsb(unsigned int addr, const void *buf, int len) +{ + unsigned long __ioaddr = (unsigned long) addr; + const uint8_t *bp = buf; + + while (len--) + __builtin_write8((volatile void __iomem *) __ioaddr, *bp++); +} + +static inline void io_outsw(unsigned int addr, const void *buf, int len) +{ + unsigned long __ioaddr = (unsigned long) addr; + const uint16_t *bp = buf; + + while (len--) + __builtin_write16((volatile void __iomem *) __ioaddr, (*bp++)); +} + +extern void __outsl_ns(unsigned int addr, const void *buf, int len); +extern void __outsl_sw(unsigned int addr, const void *buf, int len); +static inline void __outsl(unsigned int addr, const void *buf, int len, int swap) +{ + unsigned long __ioaddr = (unsigned long) addr; + + if (!swap) + __outsl_ns(__ioaddr, buf, len); + else + __outsl_sw(__ioaddr, buf, len); +} + +static inline void io_insb(unsigned long addr, void *buf, int len) +{ + uint8_t *bp = buf; + + while (len--) + *bp++ = __builtin_read8((volatile void __iomem *) addr); +} + +static inline void io_insw(unsigned long addr, void *buf, int len) +{ + uint16_t *bp = buf; + + while (len--) + *bp++ = __builtin_read16((volatile void __iomem *) addr); +} + +extern void __insl_ns(unsigned long addr, void *buf, int len); +extern void __insl_sw(unsigned long addr, void *buf, int len); +static inline void __insl(unsigned long addr, void *buf, int len, int swap) +{ + if (!swap) + __insl_ns(addr, buf, len); + else + __insl_sw(addr, buf, len); +} + +#define mmiowb() mb() + +/* + * make the short names macros so specific devices + * can override them as required + */ + +static inline void memset_io(volatile void __iomem *addr, unsigned char val, int count) +{ + memset((void __force *) addr, val, count); +} + +static inline void memcpy_fromio(void *dst, const volatile void __iomem *src, int count) +{ + memcpy(dst, (void __force *) src, count); +} + +static inline void memcpy_toio(volatile void __iomem *dst, const void *src, int count) +{ + memcpy((void __force *) dst, src, count); +} + +static inline uint8_t inb(unsigned long addr) +{ + return __builtin_read8((void __iomem *)addr); +} + +static inline uint16_t inw(unsigned long addr) +{ + uint16_t ret = __builtin_read16((void __iomem *)addr); + + if (__is_PCI_IO(addr)) + ret = _swapw(ret); + + return ret; +} + +static inline uint32_t inl(unsigned long addr) +{ + uint32_t ret = __builtin_read32((void __iomem *)addr); + + if (__is_PCI_IO(addr)) + ret = _swapl(ret); + + return ret; +} + +static inline void outb(uint8_t datum, unsigned long addr) +{ + __builtin_write8((void __iomem *)addr, datum); +} + +static inline void outw(uint16_t datum, unsigned long addr) +{ + if (__is_PCI_IO(addr)) + datum = _swapw(datum); + __builtin_write16((void __iomem *)addr, datum); +} + +static inline void outl(uint32_t datum, unsigned long addr) +{ + if (__is_PCI_IO(addr)) + datum = _swapl(datum); + __builtin_write32((void __iomem *)addr, datum); +} + +#define inb_p(addr) inb(addr) +#define inw_p(addr) inw(addr) +#define inl_p(addr) inl(addr) +#define outb_p(x,addr) outb(x,addr) +#define outw_p(x,addr) outw(x,addr) +#define outl_p(x,addr) outl(x,addr) + +#define outsb(a,b,l) io_outsb(a,b,l) +#define outsw(a,b,l) io_outsw(a,b,l) +#define outsl(a,b,l) __outsl(a,b,l,0) + +#define insb(a,b,l) io_insb(a,b,l) +#define insw(a,b,l) io_insw(a,b,l) +#define insl(a,b,l) __insl(a,b,l,0) + +#define IO_SPACE_LIMIT 0xffffffff + +static inline uint8_t readb(const volatile void __iomem *addr) +{ + return __builtin_read8((__force void volatile __iomem *) addr); +} + +static inline uint16_t readw(const volatile void __iomem *addr) +{ + uint16_t ret = __builtin_read16((__force void volatile __iomem *)addr); + + if (__is_PCI_MEM(addr)) + ret = _swapw(ret); + return ret; +} + +static inline uint32_t readl(const volatile void __iomem *addr) +{ + uint32_t ret = __builtin_read32((__force void volatile __iomem *)addr); + + if (__is_PCI_MEM(addr)) + ret = _swapl(ret); + + return ret; +} + +#define readb_relaxed readb +#define readw_relaxed readw +#define readl_relaxed readl + +static inline void writeb(uint8_t datum, volatile void __iomem *addr) +{ + __builtin_write8(addr, datum); + if (__is_PCI_MEM(addr)) + __flush_PCI_writes(); +} + +static inline void writew(uint16_t datum, volatile void __iomem *addr) +{ + if (__is_PCI_MEM(addr)) + datum = _swapw(datum); + + __builtin_write16(addr, datum); + if (__is_PCI_MEM(addr)) + __flush_PCI_writes(); +} + +static inline void writel(uint32_t datum, volatile void __iomem *addr) +{ + if (__is_PCI_MEM(addr)) + datum = _swapl(datum); + + __builtin_write32(addr, datum); + if (__is_PCI_MEM(addr)) + __flush_PCI_writes(); +} + + +/* Values for nocacheflag and cmode */ +#define IOMAP_FULL_CACHING 0 +#define IOMAP_NOCACHE_SER 1 +#define IOMAP_NOCACHE_NONSER 2 +#define IOMAP_WRITETHROUGH 3 + +extern void __iomem *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag); + +static inline void __iomem *ioremap(unsigned long physaddr, unsigned long size) +{ + return __ioremap(physaddr, size, IOMAP_NOCACHE_SER); +} + +static inline void __iomem *ioremap_nocache(unsigned long physaddr, unsigned long size) +{ + return __ioremap(physaddr, size, IOMAP_NOCACHE_SER); +} + +static inline void __iomem *ioremap_writethrough(unsigned long physaddr, unsigned long size) +{ + return __ioremap(physaddr, size, IOMAP_WRITETHROUGH); +} + +static inline void __iomem *ioremap_fullcache(unsigned long physaddr, unsigned long size) +{ + return __ioremap(physaddr, size, IOMAP_FULL_CACHING); +} + +#define ioremap_wc ioremap_nocache + +extern void iounmap(void volatile __iomem *addr); + +static inline void __iomem *ioport_map(unsigned long port, unsigned int nr) +{ + return (void __iomem *) port; +} + +static inline void ioport_unmap(void __iomem *p) +{ +} + +static inline void flush_write_buffers(void) +{ + __asm__ __volatile__ ("membar" : : :"memory"); +} + +/* + * do appropriate I/O accesses for token type + */ +static inline unsigned int ioread8(void __iomem *p) +{ + return __builtin_read8(p); +} + +static inline unsigned int ioread16(void __iomem *p) +{ + uint16_t ret = __builtin_read16(p); + if (__is_PCI_addr(p)) + ret = _swapw(ret); + return ret; +} + +static inline unsigned int ioread32(void __iomem *p) +{ + uint32_t ret = __builtin_read32(p); + if (__is_PCI_addr(p)) + ret = _swapl(ret); + return ret; +} + +static inline void iowrite8(u8 val, void __iomem *p) +{ + __builtin_write8(p, val); + if (__is_PCI_MEM(p)) + __flush_PCI_writes(); +} + +static inline void iowrite16(u16 val, void __iomem *p) +{ + if (__is_PCI_addr(p)) + val = _swapw(val); + __builtin_write16(p, val); + if (__is_PCI_MEM(p)) + __flush_PCI_writes(); +} + +static inline void iowrite32(u32 val, void __iomem *p) +{ + if (__is_PCI_addr(p)) + val = _swapl(val); + __builtin_write32(p, val); + if (__is_PCI_MEM(p)) + __flush_PCI_writes(); +} + +static inline void ioread8_rep(void __iomem *p, void *dst, unsigned long count) +{ + io_insb((unsigned long) p, dst, count); +} + +static inline void ioread16_rep(void __iomem *p, void *dst, unsigned long count) +{ + io_insw((unsigned long) p, dst, count); +} + +static inline void ioread32_rep(void __iomem *p, void *dst, unsigned long count) +{ + __insl_ns((unsigned long) p, dst, count); +} + +static inline void iowrite8_rep(void __iomem *p, const void *src, unsigned long count) +{ + io_outsb((unsigned long) p, src, count); +} + +static inline void iowrite16_rep(void __iomem *p, const void *src, unsigned long count) +{ + io_outsw((unsigned long) p, src, count); +} + +static inline void iowrite32_rep(void __iomem *p, const void *src, unsigned long count) +{ + __outsl_ns((unsigned long) p, src, count); +} + +/* Create a virtual mapping cookie for a PCI BAR (memory or IO) */ +struct pci_dev; +extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max); +static inline void pci_iounmap(struct pci_dev *dev, void __iomem *p) +{ +} + + +/* + * Convert a physical pointer to a virtual kernel pointer for /dev/mem + * access + */ +#define xlate_dev_mem_ptr(p) __va(p) + +/* + * Convert a virtual cached pointer to an uncached pointer + */ +#define xlate_dev_kmem_ptr(p) p + +#endif /* __KERNEL__ */ + +#endif /* _ASM_IO_H */ diff --git a/arch/frv/include/asm/ioctl.h b/arch/frv/include/asm/ioctl.h new file mode 100644 index 00000000000..b279fe06dfe --- /dev/null +++ b/arch/frv/include/asm/ioctl.h @@ -0,0 +1 @@ +#include <asm-generic/ioctl.h> diff --git a/arch/frv/include/asm/ioctls.h b/arch/frv/include/asm/ioctls.h new file mode 100644 index 00000000000..d0c30e31fbd --- /dev/null +++ b/arch/frv/include/asm/ioctls.h @@ -0,0 +1,86 @@ +#ifndef __ASM_IOCTLS_H__ +#define __ASM_IOCTLS_H__ + +#include <asm/ioctl.h> + +/* 0x54 is just a magic number to make these relatively unique ('T') */ + +#define TCGETS 0x5401 +#define TCSETS 0x5402 +#define TCSETSW 0x5403 +#define TCSETSF 0x5404 +#define TCGETA 0x5405 +#define TCSETA 0x5406 +#define TCSETAW 0x5407 +#define TCSETAF 0x5408 +#define TCSBRK 0x5409 +#define TCXONC 0x540A +#define TCFLSH 0x540B +#define TIOCEXCL 0x540C +#define TIOCNXCL 0x540D +#define TIOCSCTTY 0x540E +#define TIOCGPGRP 0x540F +#define TIOCSPGRP 0x5410 +#define TIOCOUTQ 0x5411 +#define TIOCSTI 0x5412 +#define TIOCGWINSZ 0x5413 +#define TIOCSWINSZ 0x5414 +#define TIOCMGET 0x5415 +#define TIOCMBIS 0x5416 +#define TIOCMBIC 0x5417 +#define TIOCMSET 0x5418 +#define TIOCGSOFTCAR 0x5419 +#define TIOCSSOFTCAR 0x541A +#define FIONREAD 0x541B +#define TIOCINQ FIONREAD +#define TIOCLINUX 0x541C +#define TIOCCONS 0x541D +#define TIOCGSERIAL 0x541E +#define TIOCSSERIAL 0x541F +#define TIOCPKT 0x5420 +#define FIONBIO 0x5421 +#define TIOCNOTTY 0x5422 +#define TIOCSETD 0x5423 +#define TIOCGETD 0x5424 +#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */ +#define TIOCTTYGSTRUCT 0x5426 /* For debugging only */ +#define TIOCSBRK 0x5427 /* BSD compatibility */ +#define TIOCCBRK 0x5428 /* BSD compatibility */ +#define TIOCGSID 0x5429 /* Return the session ID of FD */ +#define TCGETS2 _IOR('T',0x2A, struct termios2) +#define TCSETS2 _IOW('T',0x2B, struct termios2) +#define TCSETSW2 _IOW('T',0x2C, struct termios2) +#define TCSETSF2 _IOW('T',0x2D, struct termios2) +#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ +#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ + +#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */ +#define FIOCLEX 0x5451 +#define FIOASYNC 0x5452 +#define TIOCSERCONFIG 0x5453 +#define TIOCSERGWILD 0x5454 +#define TIOCSERSWILD 0x5455 +#define TIOCGLCKTRMIOS 0x5456 +#define TIOCSLCKTRMIOS 0x5457 +#define TIOCSERGSTRUCT 0x5458 /* For debugging only */ +#define TIOCSERGETLSR 0x5459 /* Get line status register */ +#define TIOCSERGETMULTI 0x545A /* Get multiport config */ +#define TIOCSERSETMULTI 0x545B /* Set multiport config */ + +#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */ +#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ +#define FIOQSIZE 0x545E + +/* Used for packet mode */ +#define TIOCPKT_DATA 0 +#define TIOCPKT_FLUSHREAD 1 +#define TIOCPKT_FLUSHWRITE 2 +#define TIOCPKT_STOP 4 +#define TIOCPKT_START 8 +#define TIOCPKT_NOSTOP 16 +#define TIOCPKT_DOSTOP 32 + +#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ + +#endif /* __ASM_IOCTLS_H__ */ + diff --git a/arch/frv/include/asm/ipcbuf.h b/arch/frv/include/asm/ipcbuf.h new file mode 100644 index 00000000000..b546f67e455 --- /dev/null +++ b/arch/frv/include/asm/ipcbuf.h @@ -0,0 +1,30 @@ +#ifndef __ASM_IPCBUF_H__ +#define __ASM_IPCBUF_H__ + +/* + * The user_ipc_perm structure for FR-V architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 32-bit mode_t and seq + * - 2 miscellaneous 32-bit values + */ + +struct ipc64_perm +{ + __kernel_key_t key; + __kernel_uid32_t uid; + __kernel_gid32_t gid; + __kernel_uid32_t cuid; + __kernel_gid32_t cgid; + __kernel_mode_t mode; + unsigned short __pad1; + unsigned short seq; + unsigned short __pad2; + unsigned long __unused1; + unsigned long __unused2; +}; + +#endif /* __ASM_IPCBUF_H__ */ + diff --git a/arch/frv/include/asm/irc-regs.h b/arch/frv/include/asm/irc-regs.h new file mode 100644 index 00000000000..afa30aeacc8 --- /dev/null +++ b/arch/frv/include/asm/irc-regs.h @@ -0,0 +1,53 @@ +/* irc-regs.h: on-chip interrupt controller registers + * + * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_IRC_REGS +#define _ASM_IRC_REGS + +#define __reg(ADDR) (*(volatile unsigned long *)(ADDR)) + +#define __get_TM0() ({ __reg(0xfeff9800); }) +#define __get_TM1() ({ __reg(0xfeff9808); }) +#define __set_TM1(V) do { __reg(0xfeff9808) = (V); mb(); } while(0) + +#define __set_TM1x(XI,V) \ +do { \ + int shift = (XI) * 2 + 16; \ + unsigned long tm1 = __reg(0xfeff9808); \ + tm1 &= ~(0x3 << shift); \ + tm1 |= (V) << shift; \ + __reg(0xfeff9808) = tm1; \ + mb(); \ +} while(0) + +#define __get_RS(C) ({ (__reg(0xfeff9810) >> ((C)+16)) & 1; }) + +#define __clr_RC(C) do { __reg(0xfeff9818) = 1 << ((C)+16); mb(); } while(0) + +#define __get_MASK(C) ({ (__reg(0xfeff9820) >> ((C)+16)) & 1; }) +#define __set_MASK(C) do { __reg(0xfeff9820) |= 1 << ((C)+16); mb(); } while(0) +#define __clr_MASK(C) do { __reg(0xfeff9820) &= ~(1 << ((C)+16)); mb(); } while(0) + +#define __get_MASK_all() __get_MASK(0) +#define __set_MASK_all() __set_MASK(0) +#define __clr_MASK_all() __clr_MASK(0) + +#define __get_IRL() ({ (__reg(0xfeff9828) >> 16) & 0xf; }) +#define __clr_IRL() do { __reg(0xfeff9828) = 0x100000; mb(); } while(0) + +#define __get_IRR(N) ({ __reg(0xfeff9840 + (N) * 8); }) +#define __set_IRR(N,V) do { __reg(0xfeff9840 + (N) * 8) = (V); } while(0) + +#define __get_IITMR(N) ({ __reg(0xfeff9880 + (N) * 8); }) +#define __set_IITMR(N,V) do { __reg(0xfeff9880 + (N) * 8) = (V); } while(0) + + +#endif /* _ASM_IRC_REGS */ diff --git a/arch/frv/include/asm/irq.h b/arch/frv/include/asm/irq.h new file mode 100644 index 00000000000..3a66ebd754b --- /dev/null +++ b/arch/frv/include/asm/irq.h @@ -0,0 +1,30 @@ +/* irq.h: FRV IRQ definitions + * + * Copyright (C) 2006 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_IRQ_H_ +#define _ASM_IRQ_H_ + +#define NR_IRQS 48 +#define IRQ_BASE_CPU (0 * 16) +#define IRQ_BASE_FPGA (1 * 16) +#define IRQ_BASE_MB93493 (2 * 16) + +/* probe returns a 32-bit IRQ mask:-/ */ +#define MIN_PROBE_IRQ (NR_IRQS - 32) + +#ifndef __ASSEMBLY__ +static inline int irq_canonicalize(int irq) +{ + return irq; +} +#endif + +#endif /* _ASM_IRQ_H_ */ diff --git a/arch/frv/include/asm/irq_regs.h b/arch/frv/include/asm/irq_regs.h new file mode 100644 index 00000000000..d22e83289ad --- /dev/null +++ b/arch/frv/include/asm/irq_regs.h @@ -0,0 +1,27 @@ +/* FRV per-CPU frame pointer holder + * + * Copyright (C) 2006 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_IRQ_REGS_H +#define _ASM_IRQ_REGS_H + +/* + * Per-cpu current frame pointer - the location of the last exception frame on + * the stack + * - on FRV, GR28 is dedicated to keeping a pointer to the current exception + * frame + */ +#define ARCH_HAS_OWN_IRQ_REGS + +#ifndef __ASSEMBLY__ +#define get_irq_regs() (__frame) +#endif + +#endif /* _ASM_IRQ_REGS_H */ diff --git a/arch/frv/include/asm/kdebug.h b/arch/frv/include/asm/kdebug.h new file mode 100644 index 00000000000..6ece1b03766 --- /dev/null +++ b/arch/frv/include/asm/kdebug.h @@ -0,0 +1 @@ +#include <asm-generic/kdebug.h> diff --git a/arch/frv/include/asm/kmap_types.h b/arch/frv/include/asm/kmap_types.h new file mode 100644 index 00000000000..f8e16b2a580 --- /dev/null +++ b/arch/frv/include/asm/kmap_types.h @@ -0,0 +1,29 @@ + +#ifndef _ASM_KMAP_TYPES_H +#define _ASM_KMAP_TYPES_H + +enum km_type { + /* arch specific kmaps - change the numbers attached to these at your peril */ + __KM_CACHE, /* cache flush page attachment point */ + __KM_PGD, /* current page directory */ + __KM_ITLB_PTD, /* current instruction TLB miss page table lookup */ + __KM_DTLB_PTD, /* current data TLB miss page table lookup */ + + /* general kmaps */ + KM_BOUNCE_READ, + KM_SKB_SUNRPC_DATA, + KM_SKB_DATA_SOFTIRQ, + KM_USER0, + KM_USER1, + KM_BIO_SRC_IRQ, + KM_BIO_DST_IRQ, + KM_PTE0, + KM_PTE1, + KM_IRQ0, + KM_IRQ1, + KM_SOFTIRQ0, + KM_SOFTIRQ1, + KM_TYPE_NR +}; + +#endif diff --git a/arch/frv/include/asm/linkage.h b/arch/frv/include/asm/linkage.h new file mode 100644 index 00000000000..636c1bced7d --- /dev/null +++ b/arch/frv/include/asm/linkage.h @@ -0,0 +1,7 @@ +#ifndef __ASM_LINKAGE_H +#define __ASM_LINKAGE_H + +#define __ALIGN .align 4 +#define __ALIGN_STR ".align 4" + +#endif diff --git a/arch/frv/include/asm/local.h b/arch/frv/include/asm/local.h new file mode 100644 index 00000000000..c27bdf04630 --- /dev/null +++ b/arch/frv/include/asm/local.h @@ -0,0 +1,6 @@ +#ifndef _ASM_LOCAL_H +#define _ASM_LOCAL_H + +#include <asm-generic/local.h> + +#endif /* _ASM_LOCAL_H */ diff --git a/arch/frv/include/asm/math-emu.h b/arch/frv/include/asm/math-emu.h new file mode 100644 index 00000000000..0c8f731b218 --- /dev/null +++ b/arch/frv/include/asm/math-emu.h @@ -0,0 +1,301 @@ +#ifndef _ASM_MATH_EMU_H +#define _ASM_MATH_EMU_H + +#include <asm/setup.h> +#include <linux/linkage.h> + +/* Status Register bits */ + +/* accrued exception bits */ +#define FPSR_AEXC_INEX 3 +#define FPSR_AEXC_DZ 4 +#define FPSR_AEXC_UNFL 5 +#define FPSR_AEXC_OVFL 6 +#define FPSR_AEXC_IOP 7 + +/* exception status bits */ +#define FPSR_EXC_INEX1 8 +#define FPSR_EXC_INEX2 9 +#define FPSR_EXC_DZ 10 +#define FPSR_EXC_UNFL 11 +#define FPSR_EXC_OVFL 12 +#define FPSR_EXC_OPERR 13 +#define FPSR_EXC_SNAN 14 +#define FPSR_EXC_BSUN 15 + +/* quotient byte, assumes big-endian, of course */ +#define FPSR_QUOTIENT(fpsr) (*((signed char *) &(fpsr) + 1)) + +/* condition code bits */ +#define FPSR_CC_NAN 24 +#define FPSR_CC_INF 25 +#define FPSR_CC_Z 26 +#define FPSR_CC_NEG 27 + + +/* Control register bits */ + +/* rounding mode */ +#define FPCR_ROUND_RN 0 /* round to nearest/even */ +#define FPCR_ROUND_RZ 1 /* round to zero */ +#define FPCR_ROUND_RM 2 /* minus infinity */ +#define FPCR_ROUND_RP 3 /* plus infinity */ + +/* rounding precision */ +#define FPCR_PRECISION_X 0 /* long double */ +#define FPCR_PRECISION_S 1 /* double */ +#define FPCR_PRECISION_D 2 /* float */ + + +/* Flags to select the debugging output */ +#define PDECODE 0 +#define PEXECUTE 1 +#define PCONV 2 +#define PNORM 3 +#define PREGISTER 4 +#define PINSTR 5 +#define PUNIMPL 6 +#define PMOVEM 7 + +#define PMDECODE (1<<PDECODE) +#define PMEXECUTE (1<<PEXECUTE) +#define PMCONV (1<<PCONV) +#define PMNORM (1<<PNORM) +#define PMREGISTER (1<<PREGISTER) +#define PMINSTR (1<<PINSTR) +#define PMUNIMPL (1<<PUNIMPL) +#define PMMOVEM (1<<PMOVEM) + +#ifndef __ASSEMBLY__ + +#include <linux/kernel.h> +#include <linux/sched.h> + +union fp_mant64 { + unsigned long long m64; + unsigned long m32[2]; +}; + +union fp_mant128 { + unsigned long long m64[2]; + unsigned long m32[4]; +}; + +/* internal representation of extended fp numbers */ +struct fp_ext { + unsigned char lowmant; + unsigned char sign; + unsigned short exp; + union fp_mant64 mant; +}; + +/* C representation of FPU registers */ +/* NOTE: if you change this, you have to change the assembler offsets + below and the size in <asm/fpu.h>, too */ +struct fp_data { + struct fp_ext fpreg[8]; + unsigned int fpcr; + unsigned int fpsr; + unsigned int fpiar; + unsigned short prec; + unsigned short rnd; + struct fp_ext temp[2]; +}; + +#if FPU_EMU_DEBUG +extern unsigned int fp_debugprint; + +#define dprint(bit, fmt, args...) ({ \ + if (fp_debugprint & (1 << (bit))) \ + printk(fmt, ## args); \ +}) +#else +#define dprint(bit, fmt, args...) +#endif + +#define uprint(str) ({ \ + static int __count = 3; \ + \ + if (__count > 0) { \ + printk("You just hit an unimplemented " \ + "fpu instruction (%s)\n", str); \ + printk("Please report this to ....\n"); \ + __count--; \ + } \ +}) + +#define FPDATA ((struct fp_data *)current->thread.fp) + +#else /* __ASSEMBLY__ */ + +#define FPDATA %a2 + +/* offsets from the base register to the floating point data in the task struct */ +#define FPD_FPREG (TASK_THREAD+THREAD_FPREG+0) +#define FPD_FPCR (TASK_THREAD+THREAD_FPREG+96) +#define FPD_FPSR (TASK_THREAD+THREAD_FPREG+100) +#define FPD_FPIAR (TASK_THREAD+THREAD_FPREG+104) +#define FPD_PREC (TASK_THREAD+THREAD_FPREG+108) +#define FPD_RND (TASK_THREAD+THREAD_FPREG+110) +#define FPD_TEMPFP1 (TASK_THREAD+THREAD_FPREG+112) +#define FPD_TEMPFP2 (TASK_THREAD+THREAD_FPREG+124) +#define FPD_SIZEOF (TASK_THREAD+THREAD_FPREG+136) + +/* offsets on the stack to access saved registers, + * these are only used during instruction decoding + * where we always know how deep we're on the stack. + */ +#define FPS_DO (PT_D0) +#define FPS_D1 (PT_D1) +#define FPS_D2 (PT_D2) +#define FPS_A0 (PT_A0) +#define FPS_A1 (PT_A1) +#define FPS_A2 (PT_A2) +#define FPS_SR (PT_SR) +#define FPS_PC (PT_PC) +#define FPS_EA (PT_PC+6) +#define FPS_PC2 (PT_PC+10) + +.macro fp_get_fp_reg + lea (FPD_FPREG,FPDATA,%d0.w*4),%a0 + lea (%a0,%d0.w*8),%a0 +.endm + +/* Macros used to get/put the current program counter. + * 020/030 use a different stack frame then 040/060, for the + * 040/060 the return pc points already to the next location, + * so this only needs to be modified for jump instructions. + */ +.macro fp_get_pc dest + move.l (FPS_PC+4,%sp),\dest +.endm + +.macro fp_put_pc src,jump=0 + move.l \src,(FPS_PC+4,%sp) +.endm + +.macro fp_get_instr_data f,s,dest,label + getuser \f,%sp@(FPS_PC+4)@(0),\dest,\label,%sp@(FPS_PC+4) + addq.l #\s,%sp@(FPS_PC+4) +.endm + +.macro fp_get_instr_word dest,label,addr + fp_get_instr_data w,2,\dest,\label,\addr +.endm + +.macro fp_get_instr_long dest,label,addr + fp_get_instr_data l,4,\dest,\label,\addr +.endm + +/* These macros are used to read from/write to user space + * on error we jump to the fixup section, load the fault + * address into %a0 and jump to the exit. + * (derived from <asm/uaccess.h>) + */ +.macro getuser size,src,dest,label,addr +| printf ,"[\size<%08x]",1,\addr +.Lu1\@: moves\size \src,\dest + + .section .fixup,"ax" + .even +.Lu2\@: move.l \addr,%a0 + jra \label + .previous + + .section __ex_table,"a" + .align 4 + .long .Lu1\@,.Lu2\@ + .previous +.endm + +.macro putuser size,src,dest,label,addr +| printf ,"[\size>%08x]",1,\addr +.Lu1\@: moves\size \src,\dest +.Lu2\@: + + .section .fixup,"ax" + .even +.Lu3\@: move.l \addr,%a0 + jra \label + .previous + + .section __ex_table,"a" + .align 4 + .long .Lu1\@,.Lu3\@ + .long .Lu2\@,.Lu3\@ + .previous +.endm + + +.macro movestack nr,arg1,arg2,arg3,arg4,arg5 + .if \nr + movestack (\nr-1),\arg2,\arg3,\arg4,\arg5 + move.l \arg1,-(%sp) + .endif +.endm + +.macro printf bit=-1,string,nr=0,arg1,arg2,arg3,arg4,arg5 +#ifdef FPU_EMU_DEBUG + .data +.Lpdata\@: + .string "\string" + .previous + + movem.l %d0/%d1/%a0/%a1,-(%sp) + .if \bit+1 +#if 0 + moveq #\bit,%d0 + andw #7,%d0 + btst %d0,fp_debugprint+((31-\bit)/8) +#else + btst #\bit,fp_debugprint+((31-\bit)/8) +#endif + jeq .Lpskip\@ + .endif + movestack \nr,\arg1,\arg2,\arg3,\arg4,\arg5 + pea .Lpdata\@ + jsr printk + lea ((\nr+1)*4,%sp),%sp +.Lpskip\@: + movem.l (%sp)+,%d0/%d1/%a0/%a1 +#endif +.endm + +.macro printx bit,fp +#ifdef FPU_EMU_DEBUG + movem.l %d0/%a0,-(%sp) + lea \fp,%a0 +#if 0 + moveq #'+',%d0 + tst.w (%a0) + jeq .Lx1\@ + moveq #'-',%d0 +.Lx1\@: printf \bit," %c",1,%d0 + move.l (4,%a0),%d0 + bclr #31,%d0 + jne .Lx2\@ + printf \bit,"0." + jra .Lx3\@ +.Lx2\@: printf \bit,"1." +.Lx3\@: printf \bit,"%08x%08x",2,%d0,%a0@(8) + move.w (2,%a0),%d0 + ext.l %d0 + printf \bit,"E%04x",1,%d0 +#else + printf \bit," %08x%08x%08x",3,%a0@,%a0@(4),%a0@(8) +#endif + movem.l (%sp)+,%d0/%a0 +#endif +.endm + +.macro debug instr,args +#ifdef FPU_EMU_DEBUG + \instr \args +#endif +.endm + + +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_FRV_MATH_EMU_H */ + diff --git a/arch/frv/include/asm/mb-regs.h b/arch/frv/include/asm/mb-regs.h new file mode 100644 index 00000000000..219e5f926f1 --- /dev/null +++ b/arch/frv/include/asm/mb-regs.h @@ -0,0 +1,200 @@ +/* mb-regs.h: motherboard registers + * + * Copyright (C) 2003, 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_MB_REGS_H +#define _ASM_MB_REGS_H + +#include <asm/cpu-irqs.h> +#include <asm/sections.h> +#include <asm/mem-layout.h> + +#ifndef __ASSEMBLY__ +/* gcc builtins, annotated */ + +unsigned long __builtin_read8(volatile void __iomem *); +unsigned long __builtin_read16(volatile void __iomem *); +unsigned long __builtin_read32(volatile void __iomem *); +void __builtin_write8(volatile void __iomem *, unsigned char); +void __builtin_write16(volatile void __iomem *, unsigned short); +void __builtin_write32(volatile void __iomem *, unsigned long); +#endif + +#define __region_IO KERNEL_IO_START /* the region from 0xe0000000 to 0xffffffff has suitable + * protection laid over the top for use in memory-mapped + * I/O + */ + +#define __region_CS0 0xff000000 /* Boot ROMs area */ + +#ifdef CONFIG_MB93091_VDK +/* + * VDK motherboard and CPU card specific stuff + */ + +#include <asm/mb93091-fpga-irqs.h> + +#define IRQ_CPU_MB93493_0 IRQ_CPU_EXTERNAL0 +#define IRQ_CPU_MB93493_1 IRQ_CPU_EXTERNAL1 + +#define __region_CS2 0xe0000000 /* SLBUS/PCI I/O space */ +#define __region_CS2_M 0x0fffffff /* mask */ +#define __region_CS2_C 0x00000000 /* control */ +#define __region_CS5 0xf0000000 /* MB93493 CSC area (DAV daughter board) */ +#define __region_CS5_M 0x00ffffff +#define __region_CS5_C 0x00010000 +#define __region_CS7 0xf1000000 /* CB70 CPU-card PCMCIA port I/O space */ +#define __region_CS7_M 0x00ffffff +#define __region_CS7_C 0x00410701 +#define __region_CS1 0xfc000000 /* SLBUS/PCI bridge control registers */ +#define __region_CS1_M 0x000fffff +#define __region_CS1_C 0x00000000 +#define __region_CS6 0xfc100000 /* CB70 CPU-card DM9000 LAN I/O space */ +#define __region_CS6_M 0x000fffff +#define __region_CS6_C 0x00400707 +#define __region_CS3 0xfc200000 /* MB93493 CSR area (DAV daughter board) */ +#define __region_CS3_M 0x000fffff +#define __region_CS3_C 0xc8100000 +#define __region_CS4 0xfd000000 /* CB70 CPU-card extra flash space */ +#define __region_CS4_M 0x00ffffff +#define __region_CS4_C 0x00000f07 + +#define __region_PCI_IO (__region_CS2 + 0x04000000UL) +#define __region_PCI_MEM (__region_CS2 + 0x08000000UL) +#define __flush_PCI_writes() \ +do { \ + __builtin_write8((volatile void __iomem *) __region_PCI_MEM, 0); \ +} while(0) + +#define __is_PCI_IO(addr) \ + (((unsigned long)(addr) >> 24) - (__region_PCI_IO >> 24) < (0x04000000UL >> 24)) + +#define __is_PCI_MEM(addr) \ + ((unsigned long)(addr) - __region_PCI_MEM < 0x08000000UL) + +#define __is_PCI_addr(addr) \ + ((unsigned long)(addr) - __region_PCI_IO < 0x0c000000UL) + +#define __get_CLKSW() ({ *(volatile unsigned long *)(__region_CS2 + 0x0130000cUL) & 0xffUL; }) +#define __get_CLKIN() (__get_CLKSW() * 125U * 100000U / 24U) + +#ifndef __ASSEMBLY__ +extern int __nongprelbss mb93090_mb00_detected; +#endif + +#define __addr_LEDS() (__region_CS2 + 0x01200004UL) +#ifdef CONFIG_MB93090_MB00 +#define __set_LEDS(X) \ +do { \ + if (mb93090_mb00_detected) \ + __builtin_write32((void __iomem *) __addr_LEDS(), ~(X)); \ +} while (0) +#else +#define __set_LEDS(X) +#endif + +#define __addr_LCD() (__region_CS2 + 0x01200008UL) +#define __get_LCD(B) __builtin_read32((volatile void __iomem *) (B)) +#define __set_LCD(B,X) __builtin_write32((volatile void __iomem *) (B), (X)) + +#define LCD_D 0x000000ff /* LCD data bus */ +#define LCD_RW 0x00000100 /* LCD R/W signal */ +#define LCD_RS 0x00000200 /* LCD Register Select */ +#define LCD_E 0x00000400 /* LCD Start Enable Signal */ + +#define LCD_CMD_CLEAR (LCD_E|0x001) +#define LCD_CMD_HOME (LCD_E|0x002) +#define LCD_CMD_CURSOR_INC (LCD_E|0x004) +#define LCD_CMD_SCROLL_INC (LCD_E|0x005) +#define LCD_CMD_CURSOR_DEC (LCD_E|0x006) +#define LCD_CMD_SCROLL_DEC (LCD_E|0x007) +#define LCD_CMD_OFF (LCD_E|0x008) +#define LCD_CMD_ON(CRSR,BLINK) (LCD_E|0x00c|(CRSR<<1)|BLINK) +#define LCD_CMD_CURSOR_MOVE_L (LCD_E|0x010) +#define LCD_CMD_CURSOR_MOVE_R (LCD_E|0x014) +#define LCD_CMD_DISPLAY_SHIFT_L (LCD_E|0x018) +#define LCD_CMD_DISPLAY_SHIFT_R (LCD_E|0x01c) +#define LCD_CMD_FUNCSET(DL,N,F) (LCD_E|0x020|(DL<<4)|(N<<3)|(F<<2)) +#define LCD_CMD_SET_CG_ADDR(X) (LCD_E|0x040|X) +#define LCD_CMD_SET_DD_ADDR(X) (LCD_E|0x080|X) +#define LCD_CMD_READ_BUSY (LCD_E|LCD_RW) +#define LCD_DATA_WRITE(X) (LCD_E|LCD_RS|(X)) +#define LCD_DATA_READ (LCD_E|LCD_RS|LCD_RW) + +#else +/* + * PDK unit specific stuff + */ + +#include <asm/mb93093-fpga-irqs.h> + +#define IRQ_CPU_MB93493_0 IRQ_CPU_EXTERNAL0 +#define IRQ_CPU_MB93493_1 IRQ_CPU_EXTERNAL1 + +#define __region_CS5 0xf0000000 /* MB93493 CSC area (DAV daughter board) */ +#define __region_CS5_M 0x00ffffff /* mask */ +#define __region_CS5_C 0x00010000 /* control */ +#define __region_CS2 0x20000000 /* FPGA registers */ +#define __region_CS2_M 0x000fffff +#define __region_CS2_C 0x00000000 +#define __region_CS1 0xfc100000 /* LAN registers */ +#define __region_CS1_M 0x000fffff +#define __region_CS1_C 0x00010404 +#define __region_CS3 0xfc200000 /* MB93493 CSR area (DAV daughter board) */ +#define __region_CS3_M 0x000fffff +#define __region_CS3_C 0xc8000000 +#define __region_CS4 0xfd000000 /* extra ROMs area */ +#define __region_CS4_M 0x00ffffff +#define __region_CS4_C 0x00000f07 + +#define __region_CS6 0xfe000000 /* not used - hide behind CPU resource I/O regs */ +#define __region_CS6_M 0x000fffff +#define __region_CS6_C 0x00000f07 +#define __region_CS7 0xfe000000 /* not used - hide behind CPU resource I/O regs */ +#define __region_CS7_M 0x000fffff +#define __region_CS7_C 0x00000f07 + +#define __is_PCI_IO(addr) 0 /* no PCI */ +#define __is_PCI_MEM(addr) 0 +#define __is_PCI_addr(addr) 0 +#define __region_PCI_IO 0 +#define __region_PCI_MEM 0 +#define __flush_PCI_writes() do { } while(0) + +#define __get_CLKSW() 0UL +#define __get_CLKIN() 66000000UL + +#define __addr_LEDS() (__region_CS2 + 0x00000023UL) +#define __set_LEDS(X) __builtin_write8((volatile void __iomem *) __addr_LEDS(), (X)) + +#define __addr_FPGATR() (__region_CS2 + 0x00000030UL) +#define __set_FPGATR(X) __builtin_write32((volatile void __iomem *) __addr_FPGATR(), (X)) +#define __get_FPGATR() __builtin_read32((volatile void __iomem *) __addr_FPGATR()) + +#define MB93093_FPGA_FPGATR_AUDIO_CLK 0x00000003 + +#define __set_FPGATR_AUDIO_CLK(V) \ + __set_FPGATR((__get_FPGATR() & ~MB93093_FPGA_FPGATR_AUDIO_CLK) | (V)) + +#define MB93093_FPGA_FPGATR_AUDIO_CLK_OFF 0x0 +#define MB93093_FPGA_FPGATR_AUDIO_CLK_11MHz 0x1 +#define MB93093_FPGA_FPGATR_AUDIO_CLK_12MHz 0x2 +#define MB93093_FPGA_FPGATR_AUDIO_CLK_02MHz 0x3 + +#define MB93093_FPGA_SWR_PUSHSWMASK (0x1F<<26) +#define MB93093_FPGA_SWR_PUSHSW4 (1<<29) + +#define __addr_FPGA_SWR ((volatile void __iomem *)(__region_CS2 + 0x28UL)) +#define __get_FPGA_PUSHSW1_5() (__builtin_read32(__addr_FPGA_SWR) & MB93093_FPGA_SWR_PUSHSWMASK) + + +#endif + +#endif /* _ASM_MB_REGS_H */ diff --git a/arch/frv/include/asm/mb86943a.h b/arch/frv/include/asm/mb86943a.h new file mode 100644 index 00000000000..e87ef924bfb --- /dev/null +++ b/arch/frv/include/asm/mb86943a.h @@ -0,0 +1,42 @@ +/* mb86943a.h: MB86943 SPARClite <-> PCI bridge registers + * + * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_MB86943A_H +#define _ASM_MB86943A_H + +#include <asm/mb-regs.h> + +#define __reg_MB86943_sl_ctl *(volatile uint32_t *) (__region_CS1 + 0x00) + +#define MB86943_SL_CTL_BUS_WIDTH_64 0x00000001 +#define MB86943_SL_CTL_AS_HOST 0x00000002 +#define MB86943_SL_CTL_DRCT_MASTER_SWAP 0x00000004 +#define MB86943_SL_CTL_DRCT_SLAVE_SWAP 0x00000008 +#define MB86943_SL_CTL_PCI_CONFIG_SWAP 0x00000010 +#define MB86943_SL_CTL_ECS0_ENABLE 0x00000020 +#define MB86943_SL_CTL_ECS1_ENABLE 0x00000040 +#define MB86943_SL_CTL_ECS2_ENABLE 0x00000080 + +#define __reg_MB86943_ecs_ctl(N) *(volatile uint32_t *) (__region_CS1 + 0x08 + (0x08*(N))) +#define __reg_MB86943_ecs_range(N) *(volatile uint32_t *) (__region_CS1 + 0x20 + (0x10*(N))) +#define __reg_MB86943_ecs_base(N) *(volatile uint32_t *) (__region_CS1 + 0x28 + (0x10*(N))) + +#define __reg_MB86943_sl_pci_io_range *(volatile uint32_t *) (__region_CS1 + 0x50) +#define __reg_MB86943_sl_pci_io_base *(volatile uint32_t *) (__region_CS1 + 0x58) +#define __reg_MB86943_sl_pci_mem_range *(volatile uint32_t *) (__region_CS1 + 0x60) +#define __reg_MB86943_sl_pci_mem_base *(volatile uint32_t *) (__region_CS1 + 0x68) +#define __reg_MB86943_pci_sl_io_base *(volatile uint32_t *) (__region_CS1 + 0x70) +#define __reg_MB86943_pci_sl_mem_base *(volatile uint32_t *) (__region_CS1 + 0x78) + +#define __reg_MB86943_pci_arbiter *(volatile uint32_t *) (__region_CS2 + 0x01300014) +#define MB86943_PCIARB_EN 0x00000001 + +#endif /* _ASM_MB86943A_H */ diff --git a/arch/frv/include/asm/mb93091-fpga-irqs.h b/arch/frv/include/asm/mb93091-fpga-irqs.h new file mode 100644 index 00000000000..19778c5ba9d --- /dev/null +++ b/arch/frv/include/asm/mb93091-fpga-irqs.h @@ -0,0 +1,42 @@ +/* mb93091-fpga-irqs.h: MB93091 CPU board FPGA IRQs + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_MB93091_FPGA_IRQS_H +#define _ASM_MB93091_FPGA_IRQS_H + +#include <asm/irq.h> + +#ifndef __ASSEMBLY__ + +/* IRQ IDs presented to drivers */ +enum { + IRQ_FPGA__UNUSED = IRQ_BASE_FPGA, + IRQ_FPGA_SYSINT_BUS_EXPANSION_1, + IRQ_FPGA_SL_BUS_EXPANSION_2, + IRQ_FPGA_PCI_INTD, + IRQ_FPGA_PCI_INTC, + IRQ_FPGA_PCI_INTB, + IRQ_FPGA_PCI_INTA, + IRQ_FPGA_SL_BUS_EXPANSION_7, + IRQ_FPGA_SYSINT_BUS_EXPANSION_8, + IRQ_FPGA_SL_BUS_EXPANSION_9, + IRQ_FPGA_MB86943_PCI_INTA, + IRQ_FPGA_MB86943_SLBUS_SIDE, + IRQ_FPGA_RTL8029_INTA, + IRQ_FPGA_SYSINT_BUS_EXPANSION_13, + IRQ_FPGA_SL_BUS_EXPANSION_14, + IRQ_FPGA_NMI, +}; + + +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_MB93091_FPGA_IRQS_H */ diff --git a/arch/frv/include/asm/mb93093-fpga-irqs.h b/arch/frv/include/asm/mb93093-fpga-irqs.h new file mode 100644 index 00000000000..590266b1a6d --- /dev/null +++ b/arch/frv/include/asm/mb93093-fpga-irqs.h @@ -0,0 +1,29 @@ +/* mb93093-fpga-irqs.h: MB93093 CPU board FPGA IRQs + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_MB93093_FPGA_IRQS_H +#define _ASM_MB93093_FPGA_IRQS_H + +#include <asm/irq.h> + +#ifndef __ASSEMBLY__ + +/* IRQ IDs presented to drivers */ +enum { + IRQ_FPGA_PUSH_BUTTON_SW1_5 = IRQ_BASE_FPGA + 8, + IRQ_FPGA_ROCKER_C_SW8 = IRQ_BASE_FPGA + 9, + IRQ_FPGA_ROCKER_C_SW9 = IRQ_BASE_FPGA + 10, +}; + + +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_MB93093_FPGA_IRQS_H */ diff --git a/arch/frv/include/asm/mb93493-irqs.h b/arch/frv/include/asm/mb93493-irqs.h new file mode 100644 index 00000000000..82c7aeddd33 --- /dev/null +++ b/arch/frv/include/asm/mb93493-irqs.h @@ -0,0 +1,50 @@ +/* mb93493-irqs.h: MB93493 companion chip IRQs + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_MB93493_IRQS_H +#define _ASM_MB93493_IRQS_H + +#include <asm/irq.h> + +#ifndef __ASSEMBLY__ + +/* IRQ IDs presented to drivers */ +enum { + IRQ_MB93493_VDC = IRQ_BASE_MB93493 + 0, + IRQ_MB93493_VCC = IRQ_BASE_MB93493 + 1, + IRQ_MB93493_AUDIO_OUT = IRQ_BASE_MB93493 + 2, + IRQ_MB93493_I2C_0 = IRQ_BASE_MB93493 + 3, + IRQ_MB93493_I2C_1 = IRQ_BASE_MB93493 + 4, + IRQ_MB93493_USB = IRQ_BASE_MB93493 + 5, + IRQ_MB93493_LOCAL_BUS = IRQ_BASE_MB93493 + 7, + IRQ_MB93493_PCMCIA = IRQ_BASE_MB93493 + 8, + IRQ_MB93493_GPIO = IRQ_BASE_MB93493 + 9, + IRQ_MB93493_AUDIO_IN = IRQ_BASE_MB93493 + 10, +}; + +/* IRQ multiplexor mappings */ +#define ROUTE_VIA_IRQ0 0 /* route IRQ by way of CPU external IRQ 0 */ +#define ROUTE_VIA_IRQ1 1 /* route IRQ by way of CPU external IRQ 1 */ + +#define IRQ_MB93493_VDC_ROUTE ROUTE_VIA_IRQ0 +#define IRQ_MB93493_VCC_ROUTE ROUTE_VIA_IRQ1 +#define IRQ_MB93493_AUDIO_OUT_ROUTE ROUTE_VIA_IRQ1 +#define IRQ_MB93493_I2C_0_ROUTE ROUTE_VIA_IRQ1 +#define IRQ_MB93493_I2C_1_ROUTE ROUTE_VIA_IRQ1 +#define IRQ_MB93493_USB_ROUTE ROUTE_VIA_IRQ1 +#define IRQ_MB93493_LOCAL_BUS_ROUTE ROUTE_VIA_IRQ1 +#define IRQ_MB93493_PCMCIA_ROUTE ROUTE_VIA_IRQ1 +#define IRQ_MB93493_GPIO_ROUTE ROUTE_VIA_IRQ1 +#define IRQ_MB93493_AUDIO_IN_ROUTE ROUTE_VIA_IRQ1 + +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_MB93493_IRQS_H */ diff --git a/arch/frv/include/asm/mb93493-regs.h b/arch/frv/include/asm/mb93493-regs.h new file mode 100644 index 00000000000..8a1f6aac8cf --- /dev/null +++ b/arch/frv/include/asm/mb93493-regs.h @@ -0,0 +1,281 @@ +/* mb93493-regs.h: MB93493 companion chip registers + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_MB93493_REGS_H +#define _ASM_MB93493_REGS_H + +#include <asm/mb-regs.h> +#include <asm/mb93493-irqs.h> + +#define __addr_MB93493(X) ((volatile unsigned long *)(__region_CS3 + (X))) +#define __get_MB93493(X) ({ *(volatile unsigned long *)(__region_CS3 + (X)); }) + +#define __set_MB93493(X,V) \ +do { \ + *(volatile unsigned long *)(__region_CS3 + (X)) = (V); mb(); \ +} while(0) + +#define __get_MB93493_STSR(X) __get_MB93493(0x3c0 + (X) * 4) +#define __set_MB93493_STSR(X,V) __set_MB93493(0x3c0 + (X) * 4, (V)) +#define MB93493_STSR_EN + +#define __addr_MB93493_IQSR(X) __addr_MB93493(0x3d0 + (X) * 4) +#define __get_MB93493_IQSR(X) __get_MB93493(0x3d0 + (X) * 4) +#define __set_MB93493_IQSR(X,V) __set_MB93493(0x3d0 + (X) * 4, (V)) + +#define __get_MB93493_DQSR(X) __get_MB93493(0x3e0 + (X) * 4) +#define __set_MB93493_DQSR(X,V) __set_MB93493(0x3e0 + (X) * 4, (V)) + +#define __get_MB93493_LBSER() __get_MB93493(0x3f0) +#define __set_MB93493_LBSER(V) __set_MB93493(0x3f0, (V)) + +#define MB93493_LBSER_VDC 0x00010000 +#define MB93493_LBSER_VCC 0x00020000 +#define MB93493_LBSER_AUDIO 0x00040000 +#define MB93493_LBSER_I2C_0 0x00080000 +#define MB93493_LBSER_I2C_1 0x00100000 +#define MB93493_LBSER_USB 0x00200000 +#define MB93493_LBSER_GPIO 0x00800000 +#define MB93493_LBSER_PCMCIA 0x01000000 + +#define __get_MB93493_LBSR() __get_MB93493(0x3fc) +#define __set_MB93493_LBSR(V) __set_MB93493(0x3fc, (V)) + +/* + * video display controller + */ +#define __get_MB93493_VDC(X) __get_MB93493(MB93493_VDC_##X) +#define __set_MB93493_VDC(X,V) __set_MB93493(MB93493_VDC_##X, (V)) + +#define MB93493_VDC_RCURSOR 0x140 /* cursor position */ +#define MB93493_VDC_RCT1 0x144 /* cursor colour 1 */ +#define MB93493_VDC_RCT2 0x148 /* cursor colour 2 */ +#define MB93493_VDC_RHDC 0x150 /* horizontal display period */ +#define MB93493_VDC_RH_MARGINS 0x154 /* horizontal margin sizes */ +#define MB93493_VDC_RVDC 0x158 /* vertical display period */ +#define MB93493_VDC_RV_MARGINS 0x15c /* vertical margin sizes */ +#define MB93493_VDC_RC 0x170 /* VDC control */ +#define MB93493_VDC_RCLOCK 0x174 /* clock divider, DMA req delay */ +#define MB93493_VDC_RBLACK 0x178 /* black insert sizes */ +#define MB93493_VDC_RS 0x17c /* VDC status */ + +#define __addr_MB93493_VDC_BCI(X) ({ (volatile unsigned long *)(__region_CS3 + 0x000 + (X)); }) +#define __addr_MB93493_VDC_TPO(X) (__region_CS3 + 0x1c0 + (X)) + +#define VDC_TPO_WIDTH 32 + +#define VDC_RC_DSR 0x00000080 /* VDC master reset */ + +#define VDC_RS_IT 0x00060000 /* interrupt indicators */ +#define VDC_RS_IT_UNDERFLOW 0x00040000 /* - underflow event */ +#define VDC_RS_IT_VSYNC 0x00020000 /* - VSYNC event */ +#define VDC_RS_DFI 0x00010000 /* current interlace field number */ +#define VDC_RS_DFI_TOP 0x00000000 /* - top field */ +#define VDC_RS_DFI_BOTTOM 0x00010000 /* - bottom field */ +#define VDC_RS_DCSR 0x00000010 /* cursor state */ +#define VDC_RS_DCM 0x00000003 /* display mode */ +#define VDC_RS_DCM_DISABLED 0x00000000 /* - display disabled */ +#define VDC_RS_DCM_STOPPED 0x00000001 /* - VDC stopped */ +#define VDC_RS_DCM_FREERUNNING 0x00000002 /* - VDC free-running */ +#define VDC_RS_DCM_TRANSFERRING 0x00000003 /* - data being transferred to VDC */ + +/* + * video capture controller + */ +#define __get_MB93493_VCC(X) __get_MB93493(MB93493_VCC_##X) +#define __set_MB93493_VCC(X,V) __set_MB93493(MB93493_VCC_##X, (V)) + +#define MB93493_VCC_RREDUCT 0x104 /* reduction rate */ +#define MB93493_VCC_RHY 0x108 /* horizontal brightness filter coefficients */ +#define MB93493_VCC_RHC 0x10c /* horizontal colour-difference filter coefficients */ +#define MB93493_VCC_RHSIZE 0x110 /* horizontal cycle sizes */ +#define MB93493_VCC_RHBC 0x114 /* horizontal back porch size */ +#define MB93493_VCC_RVCC 0x118 /* vertical capture period */ +#define MB93493_VCC_RVBC 0x11c /* vertical back porch period */ +#define MB93493_VCC_RV 0x120 /* vertical filter coefficients */ +#define MB93493_VCC_RDTS 0x128 /* DMA transfer size */ +#define MB93493_VCC_RDTS_4B 0x01000000 /* 4-byte transfer */ +#define MB93493_VCC_RDTS_32B 0x03000000 /* 32-byte transfer */ +#define MB93493_VCC_RDTS_SHIFT 24 +#define MB93493_VCC_RCC 0x130 /* VCC control */ +#define MB93493_VCC_RIS 0x134 /* VCC interrupt status */ + +#define __addr_MB93493_VCC_TPI(X) (__region_CS3 + 0x180 + (X)) + +#define VCC_RHSIZE_RHCC 0x000007ff +#define VCC_RHSIZE_RHCC_SHIFT 0 +#define VCC_RHSIZE_RHTCC 0x0fff0000 +#define VCC_RHSIZE_RHTCC_SHIFT 16 + +#define VCC_RVBC_RVBC 0x00003f00 +#define VCC_RVBC_RVBC_SHIFT 8 + +#define VCC_RREDUCT_RHR 0x07ff0000 +#define VCC_RREDUCT_RHR_SHIFT 16 +#define VCC_RREDUCT_RVR 0x000007ff +#define VCC_RREDUCT_RVR_SHIFT 0 + +#define VCC_RCC_CE 0x00000001 /* VCC enable */ +#define VCC_RCC_CS 0x00000002 /* request video capture start */ +#define VCC_RCC_CPF 0x0000000c /* pixel format */ +#define VCC_RCC_CPF_YCBCR_16 0x00000000 /* - YCbCr 4:2:2 16-bit format */ +#define VCC_RCC_CPF_RGB 0x00000004 /* - RGB 4:4:4 format */ +#define VCC_RCC_CPF_YCBCR_24 0x00000008 /* - YCbCr 4:2:2 24-bit format */ +#define VCC_RCC_CPF_BT656 0x0000000c /* - ITU R-BT.656 format */ +#define VCC_RCC_CPF_SHIFT 2 +#define VCC_RCC_CSR 0x00000080 /* request reset */ +#define VCC_RCC_HSIP 0x00000100 /* HSYNC polarity */ +#define VCC_RCC_HSIP_LOACT 0x00000000 /* - low active */ +#define VCC_RCC_HSIP_HIACT 0x00000100 /* - high active */ +#define VCC_RCC_VSIP 0x00000200 /* VSYNC polarity */ +#define VCC_RCC_VSIP_LOACT 0x00000000 /* - low active */ +#define VCC_RCC_VSIP_HIACT 0x00000200 /* - high active */ +#define VCC_RCC_CIE 0x00000800 /* interrupt enable */ +#define VCC_RCC_CFP 0x00001000 /* RGB pixel packing */ +#define VCC_RCC_CFP_4TO3 0x00000000 /* - pack 4 pixels into 3 words */ +#define VCC_RCC_CFP_1TO1 0x00001000 /* - pack 1 pixel into 1 words */ +#define VCC_RCC_CSM 0x00006000 /* interlace specification */ +#define VCC_RCC_CSM_ONEPASS 0x00002000 /* - non-interlaced */ +#define VCC_RCC_CSM_INTERLACE 0x00004000 /* - interlaced */ +#define VCC_RCC_CSM_SHIFT 13 +#define VCC_RCC_ES 0x00008000 /* capture start polarity */ +#define VCC_RCC_ES_NEG 0x00000000 /* - negative edge */ +#define VCC_RCC_ES_POS 0x00008000 /* - positive edge */ +#define VCC_RCC_IFI 0x00080000 /* inferlace field evaluation reverse */ +#define VCC_RCC_FDTS 0x00300000 /* interlace field start */ +#define VCC_RCC_FDTS_3_8 0x00000000 /* - 3/8 of horizontal entire cycle */ +#define VCC_RCC_FDTS_1_4 0x00100000 /* - 1/4 of horizontal entire cycle */ +#define VCC_RCC_FDTS_7_16 0x00200000 /* - 7/16 of horizontal entire cycle */ +#define VCC_RCC_FDTS_SHIFT 20 +#define VCC_RCC_MOV 0x00400000 /* test bit - always set to 1 */ +#define VCC_RCC_STP 0x00800000 /* request video capture stop */ +#define VCC_RCC_TO 0x01000000 /* input during top-field only */ + +#define VCC_RIS_VSYNC 0x01000000 /* VSYNC interrupt */ +#define VCC_RIS_OV 0x02000000 /* overflow interrupt */ +#define VCC_RIS_BOTTOM 0x08000000 /* interlace bottom field */ +#define VCC_RIS_STARTED 0x10000000 /* capture started */ + +/* + * I2C + */ +#define MB93493_I2C_BSR 0x340 /* bus status */ +#define MB93493_I2C_BCR 0x344 /* bus control */ +#define MB93493_I2C_CCR 0x348 /* clock control */ +#define MB93493_I2C_ADR 0x34c /* address */ +#define MB93493_I2C_DTR 0x350 /* data */ +#define MB93493_I2C_BC2R 0x35c /* bus control 2 */ + +#define __addr_MB93493_I2C(port,X) (__region_CS3 + MB93493_I2C_##X + ((port)*0x20)) +#define __get_MB93493_I2C(port,X) __get_MB93493(MB93493_I2C_##X + ((port)*0x20)) +#define __set_MB93493_I2C(port,X,V) __set_MB93493(MB93493_I2C_##X + ((port)*0x20), (V)) + +#define I2C_BSR_BB (1 << 7) + +/* + * audio controller (I2S) registers + */ +#define __get_MB93493_I2S(X) __get_MB93493(MB93493_I2S_##X) +#define __set_MB93493_I2S(X,V) __set_MB93493(MB93493_I2S_##X, (V)) + +#define MB93493_I2S_ALDR 0x300 /* L-channel data */ +#define MB93493_I2S_ARDR 0x304 /* R-channel data */ +#define MB93493_I2S_APDR 0x308 /* 16-bit packed data */ +#define MB93493_I2S_AISTR 0x310 /* status */ +#define MB93493_I2S_AICR 0x314 /* control */ + +#define __addr_MB93493_I2S_ALDR(X) (__region_CS3 + MB93493_I2S_ALDR + (X)) +#define __addr_MB93493_I2S_ARDR(X) (__region_CS3 + MB93493_I2S_ARDR + (X)) +#define __addr_MB93493_I2S_APDR(X) (__region_CS3 + MB93493_I2S_APDR + (X)) +#define __addr_MB93493_I2S_ADR(X) (__region_CS3 + 0x320 + (X)) + +#define I2S_AISTR_OTST 0x00000003 /* status of output data transfer */ +#define I2S_AISTR_OTR 0x00000010 /* output transfer request pending */ +#define I2S_AISTR_OUR 0x00000020 /* output FIFO underrun detected */ +#define I2S_AISTR_OOR 0x00000040 /* output FIFO overrun detected */ +#define I2S_AISTR_ODS 0x00000100 /* output DMA transfer size */ +#define I2S_AISTR_ODE 0x00000400 /* output DMA transfer request enable */ +#define I2S_AISTR_OTRIE 0x00001000 /* output transfer request interrupt enable */ +#define I2S_AISTR_OURIE 0x00002000 /* output FIFO underrun interrupt enable */ +#define I2S_AISTR_OORIE 0x00004000 /* output FIFO overrun interrupt enable */ +#define I2S_AISTR__OUT_MASK 0x00007570 +#define I2S_AISTR_ITST 0x00030000 /* status of input data transfer */ +#define I2S_AISTR_ITST_SHIFT 16 +#define I2S_AISTR_ITR 0x00100000 /* input transfer request pending */ +#define I2S_AISTR_IUR 0x00200000 /* input FIFO underrun detected */ +#define I2S_AISTR_IOR 0x00400000 /* input FIFO overrun detected */ +#define I2S_AISTR_IDS 0x01000000 /* input DMA transfer size */ +#define I2S_AISTR_IDE 0x04000000 /* input DMA transfer request enable */ +#define I2S_AISTR_ITRIE 0x10000000 /* input transfer request interrupt enable */ +#define I2S_AISTR_IURIE 0x20000000 /* input FIFO underrun interrupt enable */ +#define I2S_AISTR_IORIE 0x40000000 /* input FIFO overrun interrupt enable */ +#define I2S_AISTR__IN_MASK 0x75700000 + +#define I2S_AICR_MI 0x00000001 /* mono input requested */ +#define I2S_AICR_AMI 0x00000002 /* relation between LRCKI/FS1 and SDI */ +#define I2S_AICR_LRI 0x00000004 /* function of LRCKI pin */ +#define I2S_AICR_SDMI 0x00000070 /* format of input audio data */ +#define I2S_AICR_SDMI_SHIFT 4 +#define I2S_AICR_CLI 0x00000080 /* input FIFO clearing control */ +#define I2S_AICR_IM 0x00000300 /* input state control */ +#define I2S_AICR_IM_SHIFT 8 +#define I2S_AICR__IN_MASK 0x000003f7 +#define I2S_AICR_MO 0x00001000 /* mono output requested */ +#define I2S_AICR_AMO 0x00002000 /* relation between LRCKO/FS0 and SDO */ +#define I2S_AICR_AMO_SHIFT 13 +#define I2S_AICR_LRO 0x00004000 /* function of LRCKO pin */ +#define I2S_AICR_SDMO 0x00070000 /* format of output audio data */ +#define I2S_AICR_SDMO_SHIFT 16 +#define I2S_AICR_CLO 0x00080000 /* output FIFO clearing control */ +#define I2S_AICR_OM 0x00100000 /* output state control */ +#define I2S_AICR__OUT_MASK 0x001f7000 +#define I2S_AICR_DIV 0x03000000 /* frequency division rate */ +#define I2S_AICR_DIV_SHIFT 24 +#define I2S_AICR_FL 0x20000000 /* frame length */ +#define I2S_AICR_FS 0x40000000 /* frame sync method */ +#define I2S_AICR_ME 0x80000000 /* master enable */ + +/* + * PCMCIA + */ +#define __addr_MB93493_PCMCIA(X) ((volatile unsigned long *)(__region_CS5 + (X))) + +/* + * GPIO + */ +#define __get_MB93493_GPIO_PDR(X) __get_MB93493(0x380 + (X) * 0xc0) +#define __set_MB93493_GPIO_PDR(X,V) __set_MB93493(0x380 + (X) * 0xc0, (V)) + +#define __get_MB93493_GPIO_GPDR(X) __get_MB93493(0x384 + (X) * 0xc0) +#define __set_MB93493_GPIO_GPDR(X,V) __set_MB93493(0x384 + (X) * 0xc0, (V)) + +#define __get_MB93493_GPIO_SIR(X) __get_MB93493(0x388 + (X) * 0xc0) +#define __set_MB93493_GPIO_SIR(X,V) __set_MB93493(0x388 + (X) * 0xc0, (V)) + +#define __get_MB93493_GPIO_SOR(X) __get_MB93493(0x38c + (X) * 0xc0) +#define __set_MB93493_GPIO_SOR(X,V) __set_MB93493(0x38c + (X) * 0xc0, (V)) + +#define __get_MB93493_GPIO_PDSR(X) __get_MB93493(0x390 + (X) * 0xc0) +#define __set_MB93493_GPIO_PDSR(X,V) __set_MB93493(0x390 + (X) * 0xc0, (V)) + +#define __get_MB93493_GPIO_PDCR(X) __get_MB93493(0x394 + (X) * 0xc0) +#define __set_MB93493_GPIO_PDCR(X,V) __set_MB93493(0x394 + (X) * 0xc0, (V)) + +#define __get_MB93493_GPIO_INTST(X) __get_MB93493(0x398 + (X) * 0xc0) +#define __set_MB93493_GPIO_INTST(X,V) __set_MB93493(0x398 + (X) * 0xc0, (V)) + +#define __get_MB93493_GPIO_IEHL(X) __get_MB93493(0x39c + (X) * 0xc0) +#define __set_MB93493_GPIO_IEHL(X,V) __set_MB93493(0x39c + (X) * 0xc0, (V)) + +#define __get_MB93493_GPIO_IELH(X) __get_MB93493(0x3a0 + (X) * 0xc0) +#define __set_MB93493_GPIO_IELH(X,V) __set_MB93493(0x3a0 + (X) * 0xc0, (V)) + +#endif /* _ASM_MB93493_REGS_H */ diff --git a/arch/frv/include/asm/mc146818rtc.h b/arch/frv/include/asm/mc146818rtc.h new file mode 100644 index 00000000000..90dfb7a633d --- /dev/null +++ b/arch/frv/include/asm/mc146818rtc.h @@ -0,0 +1,16 @@ +/* mc146818rtc.h: RTC defs + * + * Copyright (C) 2005 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_MC146818RTC_H +#define _ASM_MC146818RTC_H + + +#endif /* _ASM_MC146818RTC_H */ diff --git a/arch/frv/include/asm/mem-layout.h b/arch/frv/include/asm/mem-layout.h new file mode 100644 index 00000000000..2947764fc0e --- /dev/null +++ b/arch/frv/include/asm/mem-layout.h @@ -0,0 +1,86 @@ +/* mem-layout.h: memory layout + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_MEM_LAYOUT_H +#define _ASM_MEM_LAYOUT_H + +#ifndef __ASSEMBLY__ +#define __UL(X) ((unsigned long) (X)) +#else +#define __UL(X) (X) +#endif + +/* + * PAGE_SHIFT determines the page size + */ +#define PAGE_SHIFT 14 + +#ifndef __ASSEMBLY__ +#define PAGE_SIZE (1UL << PAGE_SHIFT) +#else +#define PAGE_SIZE (1 << PAGE_SHIFT) +#endif + +#define PAGE_MASK (~(PAGE_SIZE-1)) + +/* + * the slab must be aligned such that load- and store-double instructions don't + * fault if used + */ +#define ARCH_KMALLOC_MINALIGN 8 +#define ARCH_SLAB_MINALIGN 8 + +/*****************************************************************************/ +/* + * virtual memory layout from kernel's point of view + */ +#define PAGE_OFFSET ((unsigned long) &__page_offset) + +#ifdef CONFIG_MMU + +/* see Documentation/frv/mmu-layout.txt */ +#define KERNEL_LOWMEM_START __UL(0xc0000000) +#define KERNEL_LOWMEM_END __UL(0xd0000000) +#define VMALLOC_START __UL(0xd0000000) +#define VMALLOC_END __UL(0xd8000000) +#define PKMAP_BASE __UL(0xd8000000) +#define PKMAP_END __UL(0xdc000000) +#define KMAP_ATOMIC_SECONDARY_FRAME __UL(0xdc000000) +#define KMAP_ATOMIC_PRIMARY_FRAME __UL(0xdd000000) + +#endif + +#define KERNEL_IO_START __UL(0xe0000000) + + +/*****************************************************************************/ +/* + * memory layout from userspace's point of view + */ +#define BRK_BASE __UL(2 * 1024 * 1024 + PAGE_SIZE) +#define STACK_TOP __UL(2 * 1024 * 1024) +#define STACK_TOP_MAX __UL(0xc0000000) + +/* userspace process size */ +#ifdef CONFIG_MMU +#define TASK_SIZE (PAGE_OFFSET) +#else +#define TASK_SIZE __UL(0xFFFFFFFFUL) +#endif + +/* base of area at which unspecified mmaps will start */ +#ifdef CONFIG_BINFMT_ELF_FDPIC +#define TASK_UNMAPPED_BASE __UL(16 * 1024 * 1024) +#else +#define TASK_UNMAPPED_BASE __UL(TASK_SIZE / 3) +#endif + +#endif /* _ASM_MEM_LAYOUT_H */ diff --git a/arch/frv/include/asm/mman.h b/arch/frv/include/asm/mman.h new file mode 100644 index 00000000000..b4371e92868 --- /dev/null +++ b/arch/frv/include/asm/mman.h @@ -0,0 +1,18 @@ +#ifndef __ASM_MMAN_H__ +#define __ASM_MMAN_H__ + +#include <asm-generic/mman.h> + +#define MAP_GROWSDOWN 0x0100 /* stack-like segment */ +#define MAP_DENYWRITE 0x0800 /* ETXTBSY */ +#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */ +#define MAP_LOCKED 0x2000 /* pages are locked */ +#define MAP_NORESERVE 0x4000 /* don't check for reservations */ +#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */ +#define MAP_NONBLOCK 0x10000 /* do not block on IO */ + +#define MCL_CURRENT 1 /* lock all current mappings */ +#define MCL_FUTURE 2 /* lock all future mappings */ + +#endif /* __ASM_MMAN_H__ */ + diff --git a/arch/frv/include/asm/mmu.h b/arch/frv/include/asm/mmu.h new file mode 100644 index 00000000000..86ca0e86e7d --- /dev/null +++ b/arch/frv/include/asm/mmu.h @@ -0,0 +1,41 @@ +/* mmu.h: memory management context for FR-V with or without MMU support + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _ASM_MMU_H +#define _ASM_MMU_H + +typedef struct { +#ifdef CONFIG_MMU + struct list_head id_link; /* link in list of context ID owners */ + unsigned short id; /* MMU context ID */ + unsigned short id_busy; /* true if ID is in CXNR */ + unsigned long itlb_cached_pge; /* [SCR0] PGE cached for insn TLB handler */ + unsigned long itlb_ptd_mapping; /* [DAMR4] PTD mapping for itlb cached PGE */ + unsigned long dtlb_cached_pge; /* [SCR1] PGE cached for data TLB handler */ + unsigned long dtlb_ptd_mapping; /* [DAMR5] PTD mapping for dtlb cached PGE */ + +#else + unsigned long end_brk; + +#endif + +#ifdef CONFIG_BINFMT_ELF_FDPIC + unsigned long exec_fdpic_loadmap; + unsigned long interp_fdpic_loadmap; +#endif + +} mm_context_t; + +#ifdef CONFIG_MMU +extern int __nongpreldata cxn_pinned; +extern int cxn_pin_by_pid(pid_t pid); +#endif + +#endif /* _ASM_MMU_H */ diff --git a/arch/frv/include/asm/mmu_context.h b/arch/frv/include/asm/mmu_context.h new file mode 100644 index 00000000000..c7daa395156 --- /dev/null +++ b/arch/frv/include/asm/mmu_context.h @@ -0,0 +1,50 @@ +/* mmu_context.h: MMU context management routines + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_MMU_CONTEXT_H +#define _ASM_MMU_CONTEXT_H + +#include <asm/setup.h> +#include <asm/page.h> +#include <asm/pgalloc.h> +#include <asm-generic/mm_hooks.h> + +static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) +{ +} + +#ifdef CONFIG_MMU +extern int init_new_context(struct task_struct *tsk, struct mm_struct *mm); +extern void change_mm_context(mm_context_t *old, mm_context_t *ctx, pgd_t *_pgd); +extern void destroy_context(struct mm_struct *mm); + +#else +#define init_new_context(tsk, mm) ({ 0; }) +#define change_mm_context(old, ctx, _pml4) do {} while(0) +#define destroy_context(mm) do {} while(0) +#endif + +#define switch_mm(prev, next, tsk) \ +do { \ + if (prev != next) \ + change_mm_context(&prev->context, &next->context, next->pgd); \ +} while(0) + +#define activate_mm(prev, next) \ +do { \ + change_mm_context(&prev->context, &next->context, next->pgd); \ +} while(0) + +#define deactivate_mm(tsk, mm) \ +do { \ +} while(0) + +#endif diff --git a/arch/frv/include/asm/module.h b/arch/frv/include/asm/module.h new file mode 100644 index 00000000000..3d5c6360289 --- /dev/null +++ b/arch/frv/include/asm/module.h @@ -0,0 +1,28 @@ +/* module.h: FRV module stuff + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _ASM_MODULE_H +#define _ASM_MODULE_H + +struct mod_arch_specific +{ +}; + +#define Elf_Shdr Elf32_Shdr +#define Elf_Sym Elf32_Sym +#define Elf_Ehdr Elf32_Ehdr + +/* + * Include the architecture version. + */ +#define MODULE_ARCH_VERMAGIC __stringify(PROCESSOR_MODEL_NAME) " " + +#endif /* _ASM_MODULE_H */ + diff --git a/arch/frv/include/asm/msgbuf.h b/arch/frv/include/asm/msgbuf.h new file mode 100644 index 00000000000..97ceb55a06f --- /dev/null +++ b/arch/frv/include/asm/msgbuf.h @@ -0,0 +1,32 @@ +#ifndef _ASM_MSGBUF_H +#define _ASM_MSGBUF_H + +/* + * The msqid64_ds structure for FR-V architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct msqid64_ds { + struct ipc64_perm msg_perm; + __kernel_time_t msg_stime; /* last msgsnd time */ + unsigned long __unused1; + __kernel_time_t msg_rtime; /* last msgrcv time */ + unsigned long __unused2; + __kernel_time_t msg_ctime; /* last change time */ + unsigned long __unused3; + unsigned long msg_cbytes; /* current number of bytes on queue */ + unsigned long msg_qnum; /* number of messages in queue */ + unsigned long msg_qbytes; /* max number of bytes on queue */ + __kernel_pid_t msg_lspid; /* pid of last msgsnd */ + __kernel_pid_t msg_lrpid; /* last receive pid */ + unsigned long __unused4; + unsigned long __unused5; +}; + +#endif /* _ASM_MSGBUF_H */ + diff --git a/arch/frv/include/asm/mutex.h b/arch/frv/include/asm/mutex.h new file mode 100644 index 00000000000..458c1f7fbc1 --- /dev/null +++ b/arch/frv/include/asm/mutex.h @@ -0,0 +1,9 @@ +/* + * Pull in the generic implementation for the mutex fastpath. + * + * TODO: implement optimized primitives instead, or leave the generic + * implementation in place, or pick the atomic_xchg() based generic + * implementation. (see asm-generic/mutex-xchg.h for details) + */ + +#include <asm-generic/mutex-dec.h> diff --git a/arch/frv/include/asm/page.h b/arch/frv/include/asm/page.h new file mode 100644 index 00000000000..bd9c220094c --- /dev/null +++ b/arch/frv/include/asm/page.h @@ -0,0 +1,78 @@ +#ifndef _ASM_PAGE_H +#define _ASM_PAGE_H + +#include <asm/virtconvert.h> +#include <asm/mem-layout.h> +#include <asm/sections.h> +#include <asm/setup.h> + +#ifndef __ASSEMBLY__ + +#define get_user_page(vaddr) __get_free_page(GFP_KERNEL) +#define free_user_page(page, addr) free_page(addr) + +#define clear_page(pgaddr) memset((pgaddr), 0, PAGE_SIZE) +#define copy_page(to,from) memcpy((to), (from), PAGE_SIZE) + +#define clear_user_page(pgaddr, vaddr, page) memset((pgaddr), 0, PAGE_SIZE) +#define copy_user_page(vto, vfrom, vaddr, topg) memcpy((vto), (vfrom), PAGE_SIZE) + +/* + * These are used to make use of C type-checking.. + */ +typedef struct { unsigned long pte; } pte_t; +typedef struct { unsigned long ste[64];} pmd_t; +typedef struct { pmd_t pue[1]; } pud_t; +typedef struct { pud_t pge[1]; } pgd_t; +typedef struct { unsigned long pgprot; } pgprot_t; +typedef struct page *pgtable_t; + +#define pte_val(x) ((x).pte) +#define pmd_val(x) ((x).ste[0]) +#define pud_val(x) ((x).pue[0]) +#define pgd_val(x) ((x).pge[0]) +#define pgprot_val(x) ((x).pgprot) + +#define __pte(x) ((pte_t) { (x) } ) +#define __pmd(x) ((pmd_t) { (x) } ) +#define __pud(x) ((pud_t) { (x) } ) +#define __pgd(x) ((pgd_t) { (x) } ) +#define __pgprot(x) ((pgprot_t) { (x) } ) +#define PTE_MASK PAGE_MASK + +#define devmem_is_allowed(pfn) 1 + +#define __pa(vaddr) virt_to_phys((void *) (unsigned long) (vaddr)) +#define __va(paddr) phys_to_virt((unsigned long) (paddr)) + +#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT) + +extern unsigned long max_low_pfn; +extern unsigned long min_low_pfn; +extern unsigned long max_pfn; + +#ifdef CONFIG_MMU +#define pfn_valid(pfn) ((pfn) < max_mapnr) +#else +#define ARCH_PFN_OFFSET (PAGE_OFFSET >> PAGE_SHIFT) +#define pfn_valid(pfn) ((pfn) >= min_low_pfn && (pfn) < max_low_pfn) + +#endif + +#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT) +#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT) + + +#ifdef CONFIG_MMU +#define VM_DATA_DEFAULT_FLAGS \ + (VM_READ | VM_WRITE | \ + ((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0 ) | \ + VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) +#endif + +#endif /* __ASSEMBLY__ */ + +#include <asm-generic/memory_model.h> +#include <asm-generic/page.h> + +#endif /* _ASM_PAGE_H */ diff --git a/arch/frv/include/asm/param.h b/arch/frv/include/asm/param.h new file mode 100644 index 00000000000..6859dd503ed --- /dev/null +++ b/arch/frv/include/asm/param.h @@ -0,0 +1,22 @@ +#ifndef _ASM_PARAM_H +#define _ASM_PARAM_H + +#ifdef __KERNEL__ +#define HZ CONFIG_HZ /* Internal kernel timer frequency */ +#define USER_HZ 100 /* .. some user interfaces are in "ticks" */ +#define CLOCKS_PER_SEC (USER_HZ) /* like times() */ +#endif + +#ifndef HZ +#define HZ 100 +#endif + +#define EXEC_PAGESIZE 16384 + +#ifndef NOGROUP +#define NOGROUP (-1) +#endif + +#define MAXHOSTNAMELEN 64 /* max length of hostname */ + +#endif /* _ASM_PARAM_H */ diff --git a/arch/frv/include/asm/pci.h b/arch/frv/include/asm/pci.h new file mode 100644 index 00000000000..585d9b49949 --- /dev/null +++ b/arch/frv/include/asm/pci.h @@ -0,0 +1,118 @@ +/* pci.h: FR-V specific PCI declarations + * + * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * - Derived from include/asm-m68k/pci.h + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef ASM_PCI_H +#define ASM_PCI_H + +#include <linux/mm.h> +#include <asm/scatterlist.h> +#include <asm-generic/pci-dma-compat.h> +#include <asm-generic/pci.h> + +struct pci_dev; + +#define pcibios_assign_all_busses() 0 + +extern void pcibios_set_master(struct pci_dev *dev); + +extern void pcibios_penalize_isa_irq(int irq); + +#ifdef CONFIG_MMU +extern void *consistent_alloc(gfp_t gfp, size_t size, dma_addr_t *dma_handle); +extern void consistent_free(void *vaddr); +extern void consistent_sync(void *vaddr, size_t size, int direction); +extern void consistent_sync_page(struct page *page, unsigned long offset, + size_t size, int direction); +#endif + +extern void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size, + dma_addr_t *dma_handle); + +extern void pci_free_consistent(struct pci_dev *hwdev, size_t size, + void *vaddr, dma_addr_t dma_handle); + +/* Return the index of the PCI controller for device PDEV. */ +#define pci_controller_num(PDEV) (0) + +/* The PCI address space does equal the physical memory + * address space. The networking and block device layers use + * this boolean for bounce buffer decisions. + */ +#define PCI_DMA_BUS_IS_PHYS (1) + +/* pci_unmap_{page,single} is a nop so... */ +#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) +#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) +#define pci_unmap_addr(PTR, ADDR_NAME) (0) +#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0) +#define pci_unmap_len(PTR, LEN_NAME) (0) +#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0) + +#ifdef CONFIG_PCI +static inline void pci_dma_burst_advice(struct pci_dev *pdev, + enum pci_dma_burst_strategy *strat, + unsigned long *strategy_parameter) +{ + *strat = PCI_DMA_BURST_INFINITY; + *strategy_parameter = ~0UL; +} +#endif + +/* + * These are pretty much arbitary with the CoMEM implementation. + * We have the whole address space to ourselves. + */ +#define PCIBIOS_MIN_IO 0x100 +#define PCIBIOS_MIN_MEM 0x00010000 + +/* Make physical memory consistent for a single + * streaming mode DMA translation after a transfer. + * + * If you perform a pci_map_single() but wish to interrogate the + * buffer using the cpu, yet do not wish to teardown the PCI dma + * mapping, you must call this function before doing so. At the + * next point you give the PCI dma address back to the card, the + * device again owns the buffer. + */ +static inline void pci_dma_sync_single(struct pci_dev *hwdev, + dma_addr_t dma_handle, + size_t size, int direction) +{ + if (direction == PCI_DMA_NONE) + BUG(); + + frv_cache_wback_inv((unsigned long)bus_to_virt(dma_handle), + (unsigned long)bus_to_virt(dma_handle) + size); +} + +/* Make physical memory consistent for a set of streaming + * mode DMA translations after a transfer. + * + * The same as pci_dma_sync_single but for a scatter-gather list, + * same rules and usage. + */ +static inline void pci_dma_sync_sg(struct pci_dev *hwdev, + struct scatterlist *sg, + int nelems, int direction) +{ + int i; + + if (direction == PCI_DMA_NONE) + BUG(); + + for (i = 0; i < nelems; i++) + frv_cache_wback_inv(sg_dma_address(&sg[i]), + sg_dma_address(&sg[i])+sg_dma_len(&sg[i])); +} + + +#endif diff --git a/arch/frv/include/asm/percpu.h b/arch/frv/include/asm/percpu.h new file mode 100644 index 00000000000..2cad3f874de --- /dev/null +++ b/arch/frv/include/asm/percpu.h @@ -0,0 +1,6 @@ +#ifndef __ASM_PERCPU_H +#define __ASM_PERCPU_H + +#include <asm-generic/percpu.h> + +#endif /* __ASM_PERCPU_H */ diff --git a/arch/frv/include/asm/pgalloc.h b/arch/frv/include/asm/pgalloc.h new file mode 100644 index 00000000000..971e6addb00 --- /dev/null +++ b/arch/frv/include/asm/pgalloc.h @@ -0,0 +1,69 @@ +/* pgalloc.h: Page allocation routines for FRV + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Derived from: + * include/asm-m68knommu/pgalloc.h + * include/asm-i386/pgalloc.h + */ +#ifndef _ASM_PGALLOC_H +#define _ASM_PGALLOC_H + +#include <asm/setup.h> +#include <asm/virtconvert.h> + +#ifdef CONFIG_MMU + +#define pmd_populate_kernel(mm, pmd, pte) __set_pmd(pmd, __pa(pte) | _PAGE_TABLE) +#define pmd_populate(MM, PMD, PAGE) \ +do { \ + __set_pmd((PMD), page_to_pfn(PAGE) << PAGE_SHIFT | _PAGE_TABLE); \ +} while(0) +#define pmd_pgtable(pmd) pmd_page(pmd) + +/* + * Allocate and free page tables. + */ + +extern pgd_t *pgd_alloc(struct mm_struct *); +extern void pgd_free(struct mm_struct *mm, pgd_t *); + +extern pte_t *pte_alloc_one_kernel(struct mm_struct *, unsigned long); + +extern pgtable_t pte_alloc_one(struct mm_struct *, unsigned long); + +static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte) +{ + free_page((unsigned long)pte); +} + +static inline void pte_free(struct mm_struct *mm, pgtable_t pte) +{ + pgtable_page_dtor(pte); + __free_page(pte); +} + +#define __pte_free_tlb(tlb,pte) \ +do { \ + pgtable_page_dtor(pte); \ + tlb_remove_page((tlb),(pte)); \ +} while (0) + +/* + * allocating and freeing a pmd is trivial: the 1-entry pmd is + * inside the pgd, so has no extra memory associated with it. + * (In the PAE case we free the pmds as part of the pgd.) + */ +#define pmd_alloc_one(mm, addr) ({ BUG(); ((pmd_t *) 2); }) +#define pmd_free(mm, x) do { } while (0) +#define __pmd_free_tlb(tlb,x) do { } while (0) + +#endif /* CONFIG_MMU */ + +#endif /* _ASM_PGALLOC_H */ diff --git a/arch/frv/include/asm/pgtable.h b/arch/frv/include/asm/pgtable.h new file mode 100644 index 00000000000..33233011b1c --- /dev/null +++ b/arch/frv/include/asm/pgtable.h @@ -0,0 +1,549 @@ +/* pgtable.h: FR-V page table mangling + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Derived from: + * include/asm-m68knommu/pgtable.h + * include/asm-i386/pgtable.h + */ + +#ifndef _ASM_PGTABLE_H +#define _ASM_PGTABLE_H + +#include <asm/mem-layout.h> +#include <asm/setup.h> +#include <asm/processor.h> + +#ifndef __ASSEMBLY__ +#include <linux/threads.h> +#include <linux/slab.h> +#include <linux/list.h> +#include <linux/spinlock.h> +#include <linux/sched.h> +struct vm_area_struct; +#endif + +#ifndef __ASSEMBLY__ +#if defined(CONFIG_HIGHPTE) +typedef unsigned long pte_addr_t; +#else +typedef pte_t *pte_addr_t; +#endif +#endif + +/*****************************************************************************/ +/* + * MMU-less operation case first + */ +#ifndef CONFIG_MMU + +#define pgd_present(pgd) (1) /* pages are always present on NO_MM */ +#define pgd_none(pgd) (0) +#define pgd_bad(pgd) (0) +#define pgd_clear(pgdp) +#define kern_addr_valid(addr) (1) +#define pmd_offset(a, b) ((void *) 0) + +#define PAGE_NONE __pgprot(0) /* these mean nothing to NO_MM */ +#define PAGE_SHARED __pgprot(0) /* these mean nothing to NO_MM */ +#define PAGE_COPY __pgprot(0) /* these mean nothing to NO_MM */ +#define PAGE_READONLY __pgprot(0) /* these mean nothing to NO_MM */ +#define PAGE_KERNEL __pgprot(0) /* these mean nothing to NO_MM */ + +#define __swp_type(x) (0) +#define __swp_offset(x) (0) +#define __swp_entry(typ,off) ((swp_entry_t) { ((typ) | ((off) << 7)) }) +#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) +#define __swp_entry_to_pte(x) ((pte_t) { (x).val }) + +#ifndef __ASSEMBLY__ +static inline int pte_file(pte_t pte) { return 0; } +#endif + +#define ZERO_PAGE(vaddr) ({ BUG(); NULL; }) + +#define swapper_pg_dir ((pgd_t *) NULL) + +#define pgtable_cache_init() do {} while (0) + +#include <asm-generic/pgtable.h> + +#else /* !CONFIG_MMU */ +/*****************************************************************************/ +/* + * then MMU operation + */ + +/* + * ZERO_PAGE is a global shared page that is always zero: used + * for zero-mapped memory areas etc.. + */ +#ifndef __ASSEMBLY__ +extern unsigned long empty_zero_page; +#define ZERO_PAGE(vaddr) virt_to_page(empty_zero_page) +#endif + +/* + * we use 2-level page tables, folding the PMD (mid-level table) into the PGE (top-level entry) + * [see Documentation/frv/mmu-layout.txt] + * + * Page Directory: + * - Size: 16KB + * - 64 PGEs per PGD + * - Each PGE holds 1 PUD and covers 64MB + * + * Page Upper Directory: + * - Size: 256B + * - 1 PUE per PUD + * - Each PUE holds 1 PMD and covers 64MB + * + * Page Mid-Level Directory + * - Size: 256B + * - 1 PME per PMD + * - Each PME holds 64 STEs, all of which point to separate chunks of the same Page Table + * - All STEs are instantiated at the same time + * + * Page Table + * - Size: 16KB + * - 4096 PTEs per PT + * - Each Linux PT is subdivided into 64 FR451 PT's, each of which holds 64 entries + * + * Pages + * - Size: 4KB + * + * total PTEs + * = 1 PML4E * 64 PGEs * 1 PUEs * 1 PMEs * 4096 PTEs + * = 1 PML4E * 64 PGEs * 64 STEs * 64 PTEs/FR451-PT + * = 262144 (or 256 * 1024) + */ +#define PGDIR_SHIFT 26 +#define PGDIR_SIZE (1UL << PGDIR_SHIFT) +#define PGDIR_MASK (~(PGDIR_SIZE - 1)) +#define PTRS_PER_PGD 64 + +#define PUD_SHIFT 26 +#define PTRS_PER_PUD 1 +#define PUD_SIZE (1UL << PUD_SHIFT) +#define PUD_MASK (~(PUD_SIZE - 1)) +#define PUE_SIZE 256 + +#define PMD_SHIFT 26 +#define PMD_SIZE (1UL << PMD_SHIFT) +#define PMD_MASK (~(PMD_SIZE - 1)) +#define PTRS_PER_PMD 1 +#define PME_SIZE 256 + +#define __frv_PT_SIZE 256 + +#define PTRS_PER_PTE 4096 + +#define USER_PGDS_IN_LAST_PML4 (TASK_SIZE / PGDIR_SIZE) +#define FIRST_USER_ADDRESS 0 + +#define USER_PGD_PTRS (PAGE_OFFSET >> PGDIR_SHIFT) +#define KERNEL_PGD_PTRS (PTRS_PER_PGD - USER_PGD_PTRS) + +#define TWOLEVEL_PGDIR_SHIFT 26 +#define BOOT_USER_PGD_PTRS (__PAGE_OFFSET >> TWOLEVEL_PGDIR_SHIFT) +#define BOOT_KERNEL_PGD_PTRS (PTRS_PER_PGD - BOOT_USER_PGD_PTRS) + +#ifndef __ASSEMBLY__ + +extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; + +#define pte_ERROR(e) \ + printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, (e).pte) +#define pmd_ERROR(e) \ + printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e)) +#define pud_ERROR(e) \ + printk("%s:%d: bad pud %08lx.\n", __FILE__, __LINE__, pmd_val(pud_val(e))) +#define pgd_ERROR(e) \ + printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pmd_val(pud_val(pgd_val(e)))) + +/* + * Certain architectures need to do special things when PTEs + * within a page table are directly modified. Thus, the following + * hook is made available. + */ +#define set_pte(pteptr, pteval) \ +do { \ + *(pteptr) = (pteval); \ + asm volatile("dcf %M0" :: "U"(*pteptr)); \ +} while(0) +#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval) + +/* + * pgd_offset() returns a (pgd_t *) + * pgd_index() is used get the offset into the pgd page's array of pgd_t's; + */ +#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address)) + +/* + * a shortcut which implies the use of the kernel's pgd, instead + * of a process's + */ +#define pgd_offset_k(address) pgd_offset(&init_mm, address) + +/* + * The "pgd_xxx()" functions here are trivial for a folded two-level + * setup: the pud is never bad, and a pud always exists (as it's folded + * into the pgd entry) + */ +static inline int pgd_none(pgd_t pgd) { return 0; } +static inline int pgd_bad(pgd_t pgd) { return 0; } +static inline int pgd_present(pgd_t pgd) { return 1; } +static inline void pgd_clear(pgd_t *pgd) { } + +#define pgd_populate(mm, pgd, pud) do { } while (0) +/* + * (puds are folded into pgds so this doesn't get actually called, + * but the define is needed for a generic inline function.) + */ +#define set_pgd(pgdptr, pgdval) \ +do { \ + memcpy((pgdptr), &(pgdval), sizeof(pgd_t)); \ + asm volatile("dcf %M0" :: "U"(*(pgdptr))); \ +} while(0) + +static inline pud_t *pud_offset(pgd_t *pgd, unsigned long address) +{ + return (pud_t *) pgd; +} + +#define pgd_page(pgd) (pud_page((pud_t){ pgd })) +#define pgd_page_vaddr(pgd) (pud_page_vaddr((pud_t){ pgd })) + +/* + * allocating and freeing a pud is trivial: the 1-entry pud is + * inside the pgd, so has no extra memory associated with it. + */ +#define pud_alloc_one(mm, address) NULL +#define pud_free(mm, x) do { } while (0) +#define __pud_free_tlb(tlb, x) do { } while (0) + +/* + * The "pud_xxx()" functions here are trivial for a folded two-level + * setup: the pmd is never bad, and a pmd always exists (as it's folded + * into the pud entry) + */ +static inline int pud_none(pud_t pud) { return 0; } +static inline int pud_bad(pud_t pud) { return 0; } +static inline int pud_present(pud_t pud) { return 1; } +static inline void pud_clear(pud_t *pud) { } + +#define pud_populate(mm, pmd, pte) do { } while (0) + +/* + * (pmds are folded into puds so this doesn't get actually called, + * but the define is needed for a generic inline function.) + */ +#define set_pud(pudptr, pudval) set_pmd((pmd_t *)(pudptr), (pmd_t) { pudval }) + +#define pud_page(pud) (pmd_page((pmd_t){ pud })) +#define pud_page_vaddr(pud) (pmd_page_vaddr((pmd_t){ pud })) + +/* + * (pmds are folded into pgds so this doesn't get actually called, + * but the define is needed for a generic inline function.) + */ +extern void __set_pmd(pmd_t *pmdptr, unsigned long __pmd); + +#define set_pmd(pmdptr, pmdval) \ +do { \ + __set_pmd((pmdptr), (pmdval).ste[0]); \ +} while(0) + +#define __pmd_index(address) 0 + +static inline pmd_t *pmd_offset(pud_t *dir, unsigned long address) +{ + return (pmd_t *) dir + __pmd_index(address); +} + +#define pte_same(a, b) ((a).pte == (b).pte) +#define pte_page(x) (mem_map + ((unsigned long)(((x).pte >> PAGE_SHIFT)))) +#define pte_none(x) (!(x).pte) +#define pte_pfn(x) ((unsigned long)(((x).pte >> PAGE_SHIFT))) +#define pfn_pte(pfn, prot) __pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot)) +#define pfn_pmd(pfn, prot) __pmd(((pfn) << PAGE_SHIFT) | pgprot_val(prot)) + +#define VMALLOC_VMADDR(x) ((unsigned long) (x)) + +#endif /* !__ASSEMBLY__ */ + +/* + * control flags in AMPR registers and TLB entries + */ +#define _PAGE_BIT_PRESENT xAMPRx_V_BIT +#define _PAGE_BIT_WP DAMPRx_WP_BIT +#define _PAGE_BIT_NOCACHE xAMPRx_C_BIT +#define _PAGE_BIT_SUPER xAMPRx_S_BIT +#define _PAGE_BIT_ACCESSED xAMPRx_RESERVED8_BIT +#define _PAGE_BIT_DIRTY xAMPRx_M_BIT +#define _PAGE_BIT_NOTGLOBAL xAMPRx_NG_BIT + +#define _PAGE_PRESENT xAMPRx_V +#define _PAGE_WP DAMPRx_WP +#define _PAGE_NOCACHE xAMPRx_C +#define _PAGE_SUPER xAMPRx_S +#define _PAGE_ACCESSED xAMPRx_RESERVED8 /* accessed if set */ +#define _PAGE_DIRTY xAMPRx_M +#define _PAGE_NOTGLOBAL xAMPRx_NG + +#define _PAGE_RESERVED_MASK (xAMPRx_RESERVED8 | xAMPRx_RESERVED13) + +#define _PAGE_FILE 0x002 /* set:pagecache unset:swap */ +#define _PAGE_PROTNONE 0x000 /* If not present */ + +#define _PAGE_CHG_MASK (PTE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY) + +#define __PGPROT_BASE \ + (_PAGE_PRESENT | xAMPRx_SS_16Kb | xAMPRx_D | _PAGE_NOTGLOBAL | _PAGE_ACCESSED) + +#define PAGE_NONE __pgprot(_PAGE_PROTNONE | _PAGE_ACCESSED) +#define PAGE_SHARED __pgprot(__PGPROT_BASE) +#define PAGE_COPY __pgprot(__PGPROT_BASE | _PAGE_WP) +#define PAGE_READONLY __pgprot(__PGPROT_BASE | _PAGE_WP) + +#define __PAGE_KERNEL (__PGPROT_BASE | _PAGE_SUPER | _PAGE_DIRTY) +#define __PAGE_KERNEL_NOCACHE (__PGPROT_BASE | _PAGE_SUPER | _PAGE_DIRTY | _PAGE_NOCACHE) +#define __PAGE_KERNEL_RO (__PGPROT_BASE | _PAGE_SUPER | _PAGE_DIRTY | _PAGE_WP) + +#define MAKE_GLOBAL(x) __pgprot((x) & ~_PAGE_NOTGLOBAL) + +#define PAGE_KERNEL MAKE_GLOBAL(__PAGE_KERNEL) +#define PAGE_KERNEL_RO MAKE_GLOBAL(__PAGE_KERNEL_RO) +#define PAGE_KERNEL_NOCACHE MAKE_GLOBAL(__PAGE_KERNEL_NOCACHE) + +#define _PAGE_TABLE (_PAGE_PRESENT | xAMPRx_SS_16Kb) + +#ifndef __ASSEMBLY__ + +/* + * The FR451 can do execute protection by virtue of having separate TLB miss handlers for + * instruction access and for data access. However, we don't have enough reserved bits to say + * "execute only", so we don't bother. If you can read it, you can execute it and vice versa. + */ +#define __P000 PAGE_NONE +#define __P001 PAGE_READONLY +#define __P010 PAGE_COPY +#define __P011 PAGE_COPY +#define __P100 PAGE_READONLY +#define __P101 PAGE_READONLY +#define __P110 PAGE_COPY +#define __P111 PAGE_COPY + +#define __S000 PAGE_NONE +#define __S001 PAGE_READONLY +#define __S010 PAGE_SHARED +#define __S011 PAGE_SHARED +#define __S100 PAGE_READONLY +#define __S101 PAGE_READONLY +#define __S110 PAGE_SHARED +#define __S111 PAGE_SHARED + +/* + * Define this to warn about kernel memory accesses that are + * done without a 'access_ok(VERIFY_WRITE,..)' + */ +#undef TEST_ACCESS_OK + +#define pte_present(x) (pte_val(x) & _PAGE_PRESENT) +#define pte_clear(mm,addr,xp) do { set_pte_at(mm, addr, xp, __pte(0)); } while (0) + +#define pmd_none(x) (!pmd_val(x)) +#define pmd_present(x) (pmd_val(x) & _PAGE_PRESENT) +#define pmd_bad(x) (pmd_val(x) & xAMPRx_SS) +#define pmd_clear(xp) do { __set_pmd(xp, 0); } while(0) + +#define pmd_page_vaddr(pmd) \ + ((unsigned long) __va(pmd_val(pmd) & PAGE_MASK)) + +#ifndef CONFIG_DISCONTIGMEM +#define pmd_page(pmd) (pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT)) +#endif + +#define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT)) + +/* + * The following only work if pte_present() is true. + * Undefined behaviour if not.. + */ +static inline int pte_dirty(pte_t pte) { return (pte).pte & _PAGE_DIRTY; } +static inline int pte_young(pte_t pte) { return (pte).pte & _PAGE_ACCESSED; } +static inline int pte_write(pte_t pte) { return !((pte).pte & _PAGE_WP); } +static inline int pte_special(pte_t pte) { return 0; } + +static inline pte_t pte_mkclean(pte_t pte) { (pte).pte &= ~_PAGE_DIRTY; return pte; } +static inline pte_t pte_mkold(pte_t pte) { (pte).pte &= ~_PAGE_ACCESSED; return pte; } +static inline pte_t pte_wrprotect(pte_t pte) { (pte).pte |= _PAGE_WP; return pte; } +static inline pte_t pte_mkdirty(pte_t pte) { (pte).pte |= _PAGE_DIRTY; return pte; } +static inline pte_t pte_mkyoung(pte_t pte) { (pte).pte |= _PAGE_ACCESSED; return pte; } +static inline pte_t pte_mkwrite(pte_t pte) { (pte).pte &= ~_PAGE_WP; return pte; } +static inline pte_t pte_mkspecial(pte_t pte) { return pte; } + +static inline int ptep_test_and_clear_young(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep) +{ + int i = test_and_clear_bit(_PAGE_BIT_ACCESSED, ptep); + asm volatile("dcf %M0" :: "U"(*ptep)); + return i; +} + +static inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) +{ + unsigned long x = xchg(&ptep->pte, 0); + asm volatile("dcf %M0" :: "U"(*ptep)); + return __pte(x); +} + +static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep) +{ + set_bit(_PAGE_BIT_WP, ptep); + asm volatile("dcf %M0" :: "U"(*ptep)); +} + +/* + * Macro to mark a page protection value as "uncacheable" + */ +#define pgprot_noncached(prot) (__pgprot(pgprot_val(prot) | _PAGE_NOCACHE)) + +/* + * Conversion functions: convert a page and protection to a page entry, + * and a page entry and page directory to the page they refer to. + */ + +#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot)) +#define mk_pte_huge(entry) ((entry).pte_low |= _PAGE_PRESENT | _PAGE_PSE) + +/* This takes a physical page address that is used by the remapping functions */ +#define mk_pte_phys(physpage, pgprot) pfn_pte((physpage) >> PAGE_SHIFT, pgprot) + +static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) +{ + pte.pte &= _PAGE_CHG_MASK; + pte.pte |= pgprot_val(newprot); + return pte; +} + +/* to find an entry in a page-table-directory. */ +#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1)) +#define pgd_index_k(addr) pgd_index(addr) + +/* Find an entry in the bottom-level page table.. */ +#define __pte_index(address) (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) + +/* + * the pte page can be thought of an array like this: pte_t[PTRS_PER_PTE] + * + * this macro returns the index of the entry in the pte page which would + * control the given virtual address + */ +#define pte_index(address) \ + (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) +#define pte_offset_kernel(dir, address) \ + ((pte_t *) pmd_page_vaddr(*(dir)) + pte_index(address)) + +#if defined(CONFIG_HIGHPTE) +#define pte_offset_map(dir, address) \ + ((pte_t *)kmap_atomic(pmd_page(*(dir)),KM_PTE0) + pte_index(address)) +#define pte_offset_map_nested(dir, address) \ + ((pte_t *)kmap_atomic(pmd_page(*(dir)),KM_PTE1) + pte_index(address)) +#define pte_unmap(pte) kunmap_atomic(pte, KM_PTE0) +#define pte_unmap_nested(pte) kunmap_atomic((pte), KM_PTE1) +#else +#define pte_offset_map(dir, address) \ + ((pte_t *)page_address(pmd_page(*(dir))) + pte_index(address)) +#define pte_offset_map_nested(dir, address) pte_offset_map((dir), (address)) +#define pte_unmap(pte) do { } while (0) +#define pte_unmap_nested(pte) do { } while (0) +#endif + +/* + * Handle swap and file entries + * - the PTE is encoded in the following format: + * bit 0: Must be 0 (!_PAGE_PRESENT) + * bit 1: Type: 0 for swap, 1 for file (_PAGE_FILE) + * bits 2-7: Swap type + * bits 8-31: Swap offset + * bits 2-31: File pgoff + */ +#define __swp_type(x) (((x).val >> 2) & 0x1f) +#define __swp_offset(x) ((x).val >> 8) +#define __swp_entry(type, offset) ((swp_entry_t) { ((type) << 2) | ((offset) << 8) }) +#define __pte_to_swp_entry(_pte) ((swp_entry_t) { (_pte).pte }) +#define __swp_entry_to_pte(x) ((pte_t) { (x).val }) + +static inline int pte_file(pte_t pte) +{ + return pte.pte & _PAGE_FILE; +} + +#define PTE_FILE_MAX_BITS 29 + +#define pte_to_pgoff(PTE) ((PTE).pte >> 2) +#define pgoff_to_pte(off) __pte((off) << 2 | _PAGE_FILE) + +/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */ +#define PageSkip(page) (0) +#define kern_addr_valid(addr) (1) + +#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \ + remap_pfn_range(vma, vaddr, pfn, size, prot) + +#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG +#define __HAVE_ARCH_PTEP_GET_AND_CLEAR +#define __HAVE_ARCH_PTEP_SET_WRPROTECT +#define __HAVE_ARCH_PTE_SAME +#include <asm-generic/pgtable.h> + +/* + * preload information about a newly instantiated PTE into the SCR0/SCR1 PGE cache + */ +static inline void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t pte) +{ + struct mm_struct *mm; + unsigned long ampr; + + mm = current->mm; + if (mm) { + pgd_t *pge = pgd_offset(mm, address); + pud_t *pue = pud_offset(pge, address); + pmd_t *pme = pmd_offset(pue, address); + + ampr = pme->ste[0] & 0xffffff00; + ampr |= xAMPRx_L | xAMPRx_SS_16Kb | xAMPRx_S | xAMPRx_C | + xAMPRx_V; + } else { + address = ULONG_MAX; + ampr = 0; + } + + asm volatile("movgs %0,scr0\n" + "movgs %0,scr1\n" + "movgs %1,dampr4\n" + "movgs %1,dampr5\n" + : + : "r"(address), "r"(ampr) + ); +} + +#ifdef CONFIG_PROC_FS +extern char *proc_pid_status_frv_cxnr(struct mm_struct *mm, char *buffer); +#endif + +extern void __init pgtable_cache_init(void); + +#endif /* !__ASSEMBLY__ */ +#endif /* !CONFIG_MMU */ + +#ifndef __ASSEMBLY__ +extern void __init paging_init(void); +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_PGTABLE_H */ diff --git a/arch/frv/include/asm/poll.h b/arch/frv/include/asm/poll.h new file mode 100644 index 00000000000..0d01479ccc5 --- /dev/null +++ b/arch/frv/include/asm/poll.h @@ -0,0 +1,12 @@ +#ifndef _ASM_POLL_H +#define _ASM_POLL_H + +#define POLLWRNORM POLLOUT +#define POLLWRBAND 256 + +#include <asm-generic/poll.h> + +#undef POLLREMOVE + +#endif + diff --git a/arch/frv/include/asm/posix_types.h b/arch/frv/include/asm/posix_types.h new file mode 100644 index 00000000000..a9f1f5be063 --- /dev/null +++ b/arch/frv/include/asm/posix_types.h @@ -0,0 +1,62 @@ +#ifndef _ASM_POSIX_TYPES_H +#define _ASM_POSIX_TYPES_H + +/* + * This file is generally used by user-level software, so you need to + * be a little careful about namespace pollution etc. Also, we cannot + * assume GCC is being used. + */ + +typedef unsigned long __kernel_ino_t; +typedef unsigned short __kernel_mode_t; +typedef unsigned short __kernel_nlink_t; +typedef long __kernel_off_t; +typedef int __kernel_pid_t; +typedef unsigned short __kernel_ipc_pid_t; +typedef unsigned short __kernel_uid_t; +typedef unsigned short __kernel_gid_t; +typedef unsigned int __kernel_size_t; +typedef int __kernel_ssize_t; +typedef int __kernel_ptrdiff_t; +typedef long __kernel_time_t; +typedef long __kernel_suseconds_t; +typedef long __kernel_clock_t; +typedef int __kernel_timer_t; +typedef int __kernel_clockid_t; +typedef int __kernel_daddr_t; +typedef char * __kernel_caddr_t; +typedef unsigned short __kernel_uid16_t; +typedef unsigned short __kernel_gid16_t; +typedef unsigned int __kernel_uid32_t; +typedef unsigned int __kernel_gid32_t; + +typedef unsigned short __kernel_old_uid_t; +typedef unsigned short __kernel_old_gid_t; +typedef unsigned short __kernel_old_dev_t; + +#ifdef __GNUC__ +typedef long long __kernel_loff_t; +#endif + +typedef struct { + int val[2]; +} __kernel_fsid_t; + +#if defined(__KERNEL__) + +#undef __FD_SET +#define __FD_SET(d, set) ((set)->fds_bits[__FDELT(d)] |= __FDMASK(d)) + +#undef __FD_CLR +#define __FD_CLR(d, set) ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d)) + +#undef __FD_ISSET +#define __FD_ISSET(d, set) (!!((set)->fds_bits[__FDELT(d)] & __FDMASK(d))) + +#undef __FD_ZERO +#define __FD_ZERO(fdsetp) (memset (fdsetp, 0, sizeof(*(fd_set *)fdsetp))) + +#endif /* defined(__KERNEL__) */ + +#endif + diff --git a/arch/frv/include/asm/processor.h b/arch/frv/include/asm/processor.h new file mode 100644 index 00000000000..3744f2e47f4 --- /dev/null +++ b/arch/frv/include/asm/processor.h @@ -0,0 +1,153 @@ +/* processor.h: FRV processor definitions + * + * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_PROCESSOR_H +#define _ASM_PROCESSOR_H + +#include <asm/mem-layout.h> + +#ifndef __ASSEMBLY__ +/* + * Default implementation of macro that returns current + * instruction pointer ("program counter"). + */ +#define current_text_addr() ({ __label__ _l; _l: &&_l;}) + +#include <linux/compiler.h> +#include <linux/linkage.h> +#include <asm/sections.h> +#include <asm/segment.h> +#include <asm/fpu.h> +#include <asm/registers.h> +#include <asm/ptrace.h> +#include <asm/current.h> +#include <asm/cache.h> + +/* Forward declaration, a strange C thing */ +struct task_struct; + +/* + * CPU type and hardware bug flags. Kept separately for each CPU. + */ +struct cpuinfo_frv { +#ifdef CONFIG_MMU + unsigned long *pgd_quick; + unsigned long *pte_quick; + unsigned long pgtable_cache_sz; +#endif +} __cacheline_aligned; + +extern struct cpuinfo_frv __nongprelbss boot_cpu_data; + +#define cpu_data (&boot_cpu_data) +#define current_cpu_data boot_cpu_data + +/* + * Bus types + */ +#define EISA_bus 0 +#define MCA_bus 0 + +struct thread_struct { + struct pt_regs *frame; /* [GR28] exception frame ptr for this thread */ + struct task_struct *curr; /* [GR29] current pointer for this thread */ + unsigned long sp; /* [GR1 ] kernel stack pointer */ + unsigned long fp; /* [GR2 ] kernel frame pointer */ + unsigned long lr; /* link register */ + unsigned long pc; /* program counter */ + unsigned long gr[12]; /* [GR16-GR27] */ + unsigned long sched_lr; /* LR from schedule() */ + + union { + struct pt_regs *frame0; /* top (user) stack frame */ + struct user_context *user; /* userspace context */ + }; +} __attribute__((aligned(8))); + +extern struct pt_regs *__kernel_frame0_ptr; +extern struct task_struct *__kernel_current_task; + +#endif + +#ifndef __ASSEMBLY__ +#define INIT_THREAD_FRAME0 \ + ((struct pt_regs *) \ + (sizeof(init_stack) + (unsigned long) init_stack - sizeof(struct user_context))) + +#define INIT_THREAD { \ + NULL, \ + (struct task_struct *) init_stack, \ + 0, 0, 0, 0, \ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, \ + 0, \ + { INIT_THREAD_FRAME0 }, \ +} + +/* + * do necessary setup to start up a newly executed thread. + * - need to discard the frame stacked by init() invoking the execve syscall + */ +#define start_thread(_regs, _pc, _usp) \ +do { \ + set_fs(USER_DS); /* reads from user space */ \ + __frame = __kernel_frame0_ptr; \ + __frame->pc = (_pc); \ + __frame->psr &= ~PSR_S; \ + __frame->sp = (_usp); \ +} while(0) + +extern void prepare_to_copy(struct task_struct *tsk); + +/* Free all resources held by a thread. */ +static inline void release_thread(struct task_struct *dead_task) +{ +} + +extern asmlinkage int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags); +extern asmlinkage void save_user_regs(struct user_context *target); +extern asmlinkage void *restore_user_regs(const struct user_context *target, ...); + +#define copy_segments(tsk, mm) do { } while (0) +#define release_segments(mm) do { } while (0) +#define forget_segments() do { } while (0) + +/* + * Free current thread data structures etc.. + */ +static inline void exit_thread(void) +{ +} + +/* + * Return saved PC of a blocked thread. + */ +extern unsigned long thread_saved_pc(struct task_struct *tsk); + +unsigned long get_wchan(struct task_struct *p); + +#define KSTK_EIP(tsk) ((tsk)->thread.frame0->pc) +#define KSTK_ESP(tsk) ((tsk)->thread.frame0->sp) + +/* Allocation and freeing of basic task resources. */ +extern struct task_struct *alloc_task_struct(void); +extern void free_task_struct(struct task_struct *p); + +#define cpu_relax() barrier() + +/* data cache prefetch */ +#define ARCH_HAS_PREFETCH +static inline void prefetch(const void *x) +{ + asm volatile("dcpl %0,gr0,#0" : : "r"(x)); +} + +#endif /* __ASSEMBLY__ */ +#endif /* _ASM_PROCESSOR_H */ diff --git a/arch/frv/include/asm/ptrace.h b/arch/frv/include/asm/ptrace.h new file mode 100644 index 00000000000..cf6934012b6 --- /dev/null +++ b/arch/frv/include/asm/ptrace.h @@ -0,0 +1,83 @@ +/* ptrace.h: ptrace() relevant definitions + * + * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _ASM_PTRACE_H +#define _ASM_PTRACE_H + +#include <asm/registers.h> +#ifdef __KERNEL__ +#include <asm/irq_regs.h> + +#define in_syscall(regs) (((regs)->tbr & TBR_TT) == TBR_TT_TRAP0) +#endif + + +#define PT_PSR 0 +#define PT_ISR 1 +#define PT_CCR 2 +#define PT_CCCR 3 +#define PT_LR 4 +#define PT_LCR 5 +#define PT_PC 6 + +#define PT__STATUS 7 /* exception status */ +#define PT_SYSCALLNO 8 /* syscall number or -1 */ +#define PT_ORIG_GR8 9 /* saved GR8 for signal handling */ +#define PT_GNER0 10 +#define PT_GNER1 11 +#define PT_IACC0H 12 +#define PT_IACC0L 13 + +#define PT_GR(j) ( 14 + (j)) /* GRj for 0<=j<=63 */ +#define PT_FR(j) ( 78 + (j)) /* FRj for 0<=j<=63 */ +#define PT_FNER(j) (142 + (j)) /* FNERj for 0<=j<=1 */ +#define PT_MSR(j) (144 + (j)) /* MSRj for 0<=j<=2 */ +#define PT_ACC(j) (146 + (j)) /* ACCj for 0<=j<=7 */ +#define PT_ACCG(jklm) (154 + (jklm)) /* ACCGjklm for 0<=jklm<=1 (reads four regs per slot) */ +#define PT_FSR(j) (156 + (j)) /* FSRj for 0<=j<=0 */ +#define PT__GPEND 78 +#define PT__END 157 + +#define PT_TBR PT_GR(0) +#define PT_SP PT_GR(1) +#define PT_FP PT_GR(2) +#define PT_PREV_FRAME PT_GR(28) /* previous exception frame pointer (old gr28 value) */ +#define PT_CURR_TASK PT_GR(29) /* current task */ + + +/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */ +#define PTRACE_GETREGS 12 +#define PTRACE_SETREGS 13 +#define PTRACE_GETFPREGS 14 +#define PTRACE_SETFPREGS 15 +#define PTRACE_GETFDPIC 31 /* get the ELF fdpic loadmap address */ + +#define PTRACE_GETFDPIC_EXEC 0 /* [addr] request the executable loadmap */ +#define PTRACE_GETFDPIC_INTERP 1 /* [addr] request the interpreter loadmap */ + +#ifdef __KERNEL__ +#ifndef __ASSEMBLY__ + +/* + * we dedicate GR28 to keeping a pointer to the current exception frame + * - gr28 is destroyed on entry to the kernel from userspace + */ +register struct pt_regs *__frame asm("gr28"); + +#define user_mode(regs) (!((regs)->psr & PSR_S)) +#define instruction_pointer(regs) ((regs)->pc) + +extern unsigned long user_stack(const struct pt_regs *); +extern void show_regs(struct pt_regs *); +#define profile_pc(regs) ((regs)->pc) +#endif + +#endif /* !__ASSEMBLY__ */ +#endif /* _ASM_PTRACE_H */ diff --git a/arch/frv/include/asm/registers.h b/arch/frv/include/asm/registers.h new file mode 100644 index 00000000000..9666119fcf6 --- /dev/null +++ b/arch/frv/include/asm/registers.h @@ -0,0 +1,232 @@ +/* registers.h: register frame declarations + * + * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +/* + * notes: + * + * (1) that the members of all these structures are carefully aligned to permit + * usage of STD/STDF instructions + * + * (2) if you change these structures, you must change the code in + * arch/frvnommu/kernel/{break.S,entry.S,switch_to.S,gdb-stub.c} + * + * + * the kernel stack space block looks like this: + * + * +0x2000 +---------------------- + * | union { + * | struct frv_frame0 { + * | struct user_context { + * | struct user_int_regs + * | struct user_fpmedia_regs + * | } + * | struct frv_debug_regs + * | } + * | struct pt_regs [user exception] + * | } + * +---------------------- <-- __kernel_frame0_ptr (maybe GR28) + * | + * | kernel stack + * | + * |...................... + * | struct pt_regs [kernel exception] + * |...................... <-- __kernel_frame0_ptr (maybe GR28) + * | + * | kernel stack + * | + * |...................... <-- stack pointer (GR1) + * | + * | unused stack space + * | + * +---------------------- + * | struct thread_info + * +0x0000 +---------------------- <-- __current_thread_info (GR15); + * + * note that GR28 points to the current exception frame + */ + +#ifndef _ASM_REGISTERS_H +#define _ASM_REGISTERS_H + +#ifndef __ASSEMBLY__ +#define __OFFSET(X,N) ((X)+(N)*4) +#define __OFFSETC(X,N) xxxxxxxxxxxxxxxxxxxxxxxx +#else +#define __OFFSET(X,N) ((X)+(N)*4) +#define __OFFSETC(X,N) ((X)+(N)) +#endif + +/*****************************************************************************/ +/* + * Exception/Interrupt frame + * - held on kernel stack + * - 8-byte aligned on stack (old SP is saved in frame) + * - GR0 is fixed 0, so we don't save it + */ +#ifndef __ASSEMBLY__ + +struct pt_regs { + unsigned long psr; /* Processor Status Register */ + unsigned long isr; /* Integer Status Register */ + unsigned long ccr; /* Condition Code Register */ + unsigned long cccr; /* Condition Code for Conditional Insns Register */ + unsigned long lr; /* Link Register */ + unsigned long lcr; /* Loop Count Register */ + unsigned long pc; /* Program Counter Register */ + unsigned long __status; /* exception status */ + unsigned long syscallno; /* syscall number or -1 */ + unsigned long orig_gr8; /* original syscall arg #1 */ + unsigned long gner0; + unsigned long gner1; + unsigned long long iacc0; + unsigned long tbr; /* GR0 is fixed zero, so we use this for TBR */ + unsigned long sp; /* GR1: USP/KSP */ + unsigned long fp; /* GR2: FP */ + unsigned long gr3; + unsigned long gr4; + unsigned long gr5; + unsigned long gr6; + unsigned long gr7; /* syscall number */ + unsigned long gr8; /* 1st syscall param; syscall return */ + unsigned long gr9; /* 2nd syscall param */ + unsigned long gr10; /* 3rd syscall param */ + unsigned long gr11; /* 4th syscall param */ + unsigned long gr12; /* 5th syscall param */ + unsigned long gr13; /* 6th syscall param */ + unsigned long gr14; + unsigned long gr15; + unsigned long gr16; /* GP pointer */ + unsigned long gr17; /* small data */ + unsigned long gr18; /* PIC/PID */ + unsigned long gr19; + unsigned long gr20; + unsigned long gr21; + unsigned long gr22; + unsigned long gr23; + unsigned long gr24; + unsigned long gr25; + unsigned long gr26; + unsigned long gr27; + struct pt_regs *next_frame; /* GR28 - next exception frame */ + unsigned long gr29; /* GR29 - OS reserved */ + unsigned long gr30; /* GR30 - OS reserved */ + unsigned long gr31; /* GR31 - OS reserved */ +} __attribute__((aligned(8))); + +#endif + +#define REG__STATUS_STEP 0x00000001 /* - reenable single stepping on return */ +#define REG__STATUS_STEPPED 0x00000002 /* - single step caused exception */ +#define REG__STATUS_BROKE 0x00000004 /* - BREAK insn caused exception */ +#define REG__STATUS_SYSC_ENTRY 0x40000000 /* - T on syscall entry (ptrace.c only) */ +#define REG__STATUS_SYSC_EXIT 0x80000000 /* - T on syscall exit (ptrace.c only) */ + +#define REG_GR(R) __OFFSET(REG_GR0, (R)) + +#define REG_SP REG_GR(1) +#define REG_FP REG_GR(2) +#define REG_PREV_FRAME REG_GR(28) /* previous exception frame pointer (old gr28 value) */ +#define REG_CURR_TASK REG_GR(29) /* current task */ + +/*****************************************************************************/ +/* + * debugging registers + */ +#ifndef __ASSEMBLY__ + +struct frv_debug_regs +{ + unsigned long dcr; + unsigned long ibar[4] __attribute__((aligned(8))); + unsigned long dbar[4] __attribute__((aligned(8))); + unsigned long dbdr[4][4] __attribute__((aligned(8))); + unsigned long dbmr[4][4] __attribute__((aligned(8))); +} __attribute__((aligned(8))); + +#endif + +/*****************************************************************************/ +/* + * userspace registers + */ +#ifndef __ASSEMBLY__ + +struct user_int_regs +{ + /* integer registers + * - up to gr[31] mirror pt_regs + * - total size must be multiple of 8 bytes + */ + unsigned long psr; /* Processor Status Register */ + unsigned long isr; /* Integer Status Register */ + unsigned long ccr; /* Condition Code Register */ + unsigned long cccr; /* Condition Code for Conditional Insns Register */ + unsigned long lr; /* Link Register */ + unsigned long lcr; /* Loop Count Register */ + unsigned long pc; /* Program Counter Register */ + unsigned long __status; /* exception status */ + unsigned long syscallno; /* syscall number or -1 */ + unsigned long orig_gr8; /* original syscall arg #1 */ + unsigned long gner[2]; + unsigned long long iacc[1]; + + union { + unsigned long tbr; + unsigned long gr[64]; + }; +}; + +struct user_fpmedia_regs +{ + /* FP/Media registers */ + unsigned long fr[64]; + unsigned long fner[2]; + unsigned long msr[2]; + unsigned long acc[8]; + unsigned char accg[8]; + unsigned long fsr[1]; +}; + +struct user_context +{ + struct user_int_regs i; + struct user_fpmedia_regs f; + + /* we provide a context extension so that we can save the regs for CPUs that + * implement many more of Fujitsu's lavish register spec + */ + void *extension; +} __attribute__((aligned(8))); + +struct frv_frame0 { + union { + struct pt_regs regs; + struct user_context uc; + }; + + struct frv_debug_regs debug; + +} __attribute__((aligned(32))); + +#endif + +#define __INT_GR(R) __OFFSET(__INT_GR0, (R)) + +#define __FPMEDIA_FR(R) __OFFSET(__FPMEDIA_FR0, (R)) +#define __FPMEDIA_FNER(R) __OFFSET(__FPMEDIA_FNER0, (R)) +#define __FPMEDIA_MSR(R) __OFFSET(__FPMEDIA_MSR0, (R)) +#define __FPMEDIA_ACC(R) __OFFSET(__FPMEDIA_ACC0, (R)) +#define __FPMEDIA_ACCG(R) __OFFSETC(__FPMEDIA_ACCG0, (R)) +#define __FPMEDIA_FSR(R) __OFFSET(__FPMEDIA_FSR0, (R)) + +#define __THREAD_GR(R) __OFFSET(__THREAD_GR16, (R) - 16) + +#endif /* _ASM_REGISTERS_H */ diff --git a/arch/frv/include/asm/resource.h b/arch/frv/include/asm/resource.h new file mode 100644 index 00000000000..5fc60548fd0 --- /dev/null +++ b/arch/frv/include/asm/resource.h @@ -0,0 +1,7 @@ +#ifndef _ASM_RESOURCE_H +#define _ASM_RESOURCE_H + +#include <asm-generic/resource.h> + +#endif /* _ASM_RESOURCE_H */ + diff --git a/arch/frv/include/asm/scatterlist.h b/arch/frv/include/asm/scatterlist.h new file mode 100644 index 00000000000..4bca8a28546 --- /dev/null +++ b/arch/frv/include/asm/scatterlist.h @@ -0,0 +1,46 @@ +#ifndef _ASM_SCATTERLIST_H +#define _ASM_SCATTERLIST_H + +#include <asm/types.h> + +/* + * Drivers must set either ->address or (preferred) page and ->offset + * to indicate where data must be transferred to/from. + * + * Using page is recommended since it handles highmem data as well as + * low mem. ->address is restricted to data which has a virtual mapping, and + * it will go away in the future. Updating to page can be automated very + * easily -- something like + * + * sg->address = some_ptr; + * + * can be rewritten as + * + * sg_set_buf(sg, some_ptr, length); + * + * and that's it. There's no excuse for not highmem enabling YOUR driver. /jens + */ +struct scatterlist { +#ifdef CONFIG_DEBUG_SG + unsigned long sg_magic; +#endif + unsigned long page_link; + unsigned int offset; /* for highmem, page offset */ + + dma_addr_t dma_address; + unsigned int length; +}; + +/* + * These macros should be used after a pci_map_sg call has been done + * to get bus addresses of each of the SG entries and their lengths. + * You should only work with the number of sg entries pci_map_sg + * returns, or alternatively stop on the first sg_dma_len(sg) which + * is 0. + */ +#define sg_dma_address(sg) ((sg)->dma_address) +#define sg_dma_len(sg) ((sg)->length) + +#define ISA_DMA_THRESHOLD (0xffffffffUL) + +#endif /* !_ASM_SCATTERLIST_H */ diff --git a/arch/frv/include/asm/sections.h b/arch/frv/include/asm/sections.h new file mode 100644 index 00000000000..17d0fb171bb --- /dev/null +++ b/arch/frv/include/asm/sections.h @@ -0,0 +1,46 @@ +/* sections.h: linkage layout variables + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_SECTIONS_H +#define _ASM_SECTIONS_H + +#ifndef __ASSEMBLY__ + +#include <linux/types.h> +#include <asm-generic/sections.h> + +#ifdef __KERNEL__ + +/* + * we don't want to put variables in the GP-REL section if they're not used very much - that would + * be waste since GP-REL addressing is limited to GP16+/-2048 + */ +#define __nongpreldata __attribute__((section(".data"))) +#define __nongprelbss __attribute__((section(".bss"))) + +/* + * linker symbols + */ +extern const void __kernel_image_start, __kernel_image_end, __page_offset; + +extern unsigned long __nongprelbss memory_start; +extern unsigned long __nongprelbss memory_end; +extern unsigned long __nongprelbss rom_length; + +/* determine if we're running from ROM */ +static inline int is_in_rom(unsigned long addr) +{ + return 0; /* default case: not in ROM */ +} + +#endif +#endif +#endif /* _ASM_SECTIONS_H */ diff --git a/arch/frv/include/asm/segment.h b/arch/frv/include/asm/segment.h new file mode 100644 index 00000000000..e3616a6f941 --- /dev/null +++ b/arch/frv/include/asm/segment.h @@ -0,0 +1,45 @@ +/* segment.h: MMU segment settings + * + * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_SEGMENT_H +#define _ASM_SEGMENT_H + + +#ifndef __ASSEMBLY__ + +typedef struct { + unsigned long seg; +} mm_segment_t; + +#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) + +#define KERNEL_DS MAKE_MM_SEG(0xdfffffffUL) + +#ifdef CONFIG_MMU +#define USER_DS MAKE_MM_SEG(TASK_SIZE - 1) +#else +#define USER_DS KERNEL_DS +#endif + +#define get_ds() (KERNEL_DS) +#define get_fs() (__current_thread_info->addr_limit) +#define segment_eq(a,b) ((a).seg == (b).seg) +#define __kernel_ds_p() segment_eq(get_fs(), KERNEL_DS) +#define get_addr_limit() (get_fs().seg) + +#define set_fs(_x) \ +do { \ + __current_thread_info->addr_limit = (_x); \ +} while(0) + + +#endif /* __ASSEMBLY__ */ +#endif /* _ASM_SEGMENT_H */ diff --git a/arch/frv/include/asm/sembuf.h b/arch/frv/include/asm/sembuf.h new file mode 100644 index 00000000000..164b12786d6 --- /dev/null +++ b/arch/frv/include/asm/sembuf.h @@ -0,0 +1,26 @@ +#ifndef _ASM_SEMBUF_H +#define _ASM_SEMBUF_H + +/* + * The semid64_ds structure for FR-V architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct semid64_ds { + struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ + __kernel_time_t sem_otime; /* last semop time */ + unsigned long __unused1; + __kernel_time_t sem_ctime; /* last change time */ + unsigned long __unused2; + unsigned long sem_nsems; /* no. of semaphores in array */ + unsigned long __unused3; + unsigned long __unused4; +}; + +#endif /* _ASM_SEMBUF_H */ + diff --git a/arch/frv/include/asm/serial-regs.h b/arch/frv/include/asm/serial-regs.h new file mode 100644 index 00000000000..e1286bda00e --- /dev/null +++ b/arch/frv/include/asm/serial-regs.h @@ -0,0 +1,44 @@ +/* serial-regs.h: serial port registers + * + * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_SERIAL_REGS_H +#define _ASM_SERIAL_REGS_H + +#include <linux/serial_reg.h> +#include <asm/irc-regs.h> + +#define SERIAL_ICLK 33333333 /* the target serial input clock */ +#define UART0_BASE 0xfeff9c00 +#define UART1_BASE 0xfeff9c40 + +#define __get_UART0(R) ({ __reg(UART0_BASE + (R) * 8) >> 24; }) +#define __get_UART1(R) ({ __reg(UART1_BASE + (R) * 8) >> 24; }) +#define __set_UART0(R,V) do { __reg(UART0_BASE + (R) * 8) = (V) << 24; } while(0) +#define __set_UART1(R,V) do { __reg(UART1_BASE + (R) * 8) = (V) << 24; } while(0) + +#define __get_UART0_LSR() ({ __get_UART0(UART_LSR); }) +#define __get_UART1_LSR() ({ __get_UART1(UART_LSR); }) + +#define __set_UART0_IER(V) __set_UART0(UART_IER,(V)) +#define __set_UART1_IER(V) __set_UART1(UART_IER,(V)) + +/* serial prescaler select register */ +#define __get_UCPSR() ({ *(volatile unsigned long *)(0xfeff9c90); }) +#define __set_UCPSR(V) do { *(volatile unsigned long *)(0xfeff9c90) = (V); } while(0) +#define UCPSR_SELECT0 0x07000000 +#define UCPSR_SELECT1 0x38000000 + +/* serial prescaler base value register */ +#define __get_UCPVR() ({ *(volatile unsigned long *)(0xfeff9c98); mb(); }) +#define __set_UCPVR(V) do { *(volatile unsigned long *)(0xfeff9c98) = (V) << 24; mb(); } while(0) + + +#endif /* _ASM_SERIAL_REGS_H */ diff --git a/arch/frv/include/asm/serial.h b/arch/frv/include/asm/serial.h new file mode 100644 index 00000000000..dbb82599868 --- /dev/null +++ b/arch/frv/include/asm/serial.h @@ -0,0 +1,18 @@ +/* + * serial.h + * + * Copyright (C) 2003 Develer S.r.l. (http://www.develer.com/) + * Author: Bernardo Innocenti <bernie@codewiz.org> + * + * Based on linux/include/asm-i386/serial.h + */ +#include <asm/serial-regs.h> + +/* + * the base baud is derived from the clock speed and so is variable + */ +#define BASE_BAUD 0 + +#define STD_COM_FLAGS ASYNC_BOOT_AUTOCONF + +#define SERIAL_PORT_DFNS diff --git a/arch/frv/include/asm/setup.h b/arch/frv/include/asm/setup.h new file mode 100644 index 00000000000..afd787ceede --- /dev/null +++ b/arch/frv/include/asm/setup.h @@ -0,0 +1,31 @@ +/* setup.h: setup stuff + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_SETUP_H +#define _ASM_SETUP_H + +#define COMMAND_LINE_SIZE 512 + +#ifdef __KERNEL__ + +#include <linux/init.h> + +#ifndef __ASSEMBLY__ + +#ifdef CONFIG_MMU +extern unsigned long __initdata num_mappedpages; +#endif + +#endif /* !__ASSEMBLY__ */ + +#endif /* __KERNEL__ */ + +#endif /* _ASM_SETUP_H */ diff --git a/arch/frv/include/asm/shmbuf.h b/arch/frv/include/asm/shmbuf.h new file mode 100644 index 00000000000..4c6e711a477 --- /dev/null +++ b/arch/frv/include/asm/shmbuf.h @@ -0,0 +1,43 @@ +#ifndef _ASM_SHMBUF_H +#define _ASM_SHMBUF_H + +/* + * The shmid64_ds structure for FR-V architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct shmid64_ds { + struct ipc64_perm shm_perm; /* operation perms */ + size_t shm_segsz; /* size of segment (bytes) */ + __kernel_time_t shm_atime; /* last attach time */ + unsigned long __unused1; + __kernel_time_t shm_dtime; /* last detach time */ + unsigned long __unused2; + __kernel_time_t shm_ctime; /* last change time */ + unsigned long __unused3; + __kernel_pid_t shm_cpid; /* pid of creator */ + __kernel_pid_t shm_lpid; /* pid of last operator */ + unsigned long shm_nattch; /* no. of current attaches */ + unsigned long __unused4; + unsigned long __unused5; +}; + +struct shminfo64 { + unsigned long shmmax; + unsigned long shmmin; + unsigned long shmmni; + unsigned long shmseg; + unsigned long shmall; + unsigned long __unused1; + unsigned long __unused2; + unsigned long __unused3; + unsigned long __unused4; +}; + +#endif /* _ASM_SHMBUF_H */ + diff --git a/arch/frv/include/asm/shmparam.h b/arch/frv/include/asm/shmparam.h new file mode 100644 index 00000000000..ab711009cfa --- /dev/null +++ b/arch/frv/include/asm/shmparam.h @@ -0,0 +1,7 @@ +#ifndef _ASM_SHMPARAM_H +#define _ASM_SHMPARAM_H + +#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */ + +#endif /* _ASM_SHMPARAM_H */ + diff --git a/arch/frv/include/asm/sigcontext.h b/arch/frv/include/asm/sigcontext.h new file mode 100644 index 00000000000..3b263f3cc96 --- /dev/null +++ b/arch/frv/include/asm/sigcontext.h @@ -0,0 +1,26 @@ +/* sigcontext.h: FRV signal context + * + * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _ASM_SIGCONTEXT_H +#define _ASM_SIGCONTEXT_H + +#include <asm/registers.h> + +/* + * Signal context structure - contains all info to do with the state + * before the signal handler was invoked. Note: only add new entries + * to the end of the structure. + */ +struct sigcontext { + struct user_context sc_context; + unsigned long sc_oldmask; /* old sigmask */ +} __attribute__((aligned(8))); + +#endif diff --git a/arch/frv/include/asm/siginfo.h b/arch/frv/include/asm/siginfo.h new file mode 100644 index 00000000000..d3fd1ca4565 --- /dev/null +++ b/arch/frv/include/asm/siginfo.h @@ -0,0 +1,12 @@ +#ifndef _ASM_SIGINFO_H +#define _ASM_SIGINFO_H + +#include <linux/types.h> +#include <asm-generic/siginfo.h> + +#define FPE_MDAOVF (__SI_FAULT|9) /* media overflow */ +#undef NSIGFPE +#define NSIGFPE 9 + +#endif + diff --git a/arch/frv/include/asm/signal.h b/arch/frv/include/asm/signal.h new file mode 100644 index 00000000000..2079197d483 --- /dev/null +++ b/arch/frv/include/asm/signal.h @@ -0,0 +1,161 @@ +#ifndef _ASM_SIGNAL_H +#define _ASM_SIGNAL_H + +#include <linux/types.h> + +/* Avoid too many header ordering problems. */ +struct siginfo; + +#ifdef __KERNEL__ +/* Most things should be clean enough to redefine this at will, if care + is taken to make libc match. */ + +#define _NSIG 64 +#define _NSIG_BPW 32 +#define _NSIG_WORDS (_NSIG / _NSIG_BPW) + +typedef unsigned long old_sigset_t; /* at least 32 bits */ + +typedef struct { + unsigned long sig[_NSIG_WORDS]; +} sigset_t; + +#else +/* Here we must cater to libcs that poke about in kernel headers. */ + +#define NSIG 32 +typedef unsigned long sigset_t; + +#endif /* __KERNEL__ */ + +#define SIGHUP 1 +#define SIGINT 2 +#define SIGQUIT 3 +#define SIGILL 4 +#define SIGTRAP 5 +#define SIGABRT 6 +#define SIGIOT 6 +#define SIGBUS 7 +#define SIGFPE 8 +#define SIGKILL 9 +#define SIGUSR1 10 +#define SIGSEGV 11 +#define SIGUSR2 12 +#define SIGPIPE 13 +#define SIGALRM 14 +#define SIGTERM 15 +#define SIGSTKFLT 16 +#define SIGCHLD 17 +#define SIGCONT 18 +#define SIGSTOP 19 +#define SIGTSTP 20 +#define SIGTTIN 21 +#define SIGTTOU 22 +#define SIGURG 23 +#define SIGXCPU 24 +#define SIGXFSZ 25 +#define SIGVTALRM 26 +#define SIGPROF 27 +#define SIGWINCH 28 +#define SIGIO 29 +#define SIGPOLL SIGIO +/* +#define SIGLOST 29 +*/ +#define SIGPWR 30 +#define SIGSYS 31 +#define SIGUNUSED 31 + +/* These should not be considered constants from userland. */ +#define SIGRTMIN 32 +#define SIGRTMAX (_NSIG-1) + +/* + * SA_FLAGS values: + * + * SA_ONSTACK indicates that a registered stack_t will be used. + * SA_RESTART flag to get restarting signals (which were the default long ago) + * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. + * SA_RESETHAND clears the handler when the signal is delivered. + * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. + * SA_NODEFER prevents the current signal from being masked in the handler. + * + * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single + * Unix names RESETHAND and NODEFER respectively. + */ +#define SA_NOCLDSTOP 0x00000001 +#define SA_NOCLDWAIT 0x00000002 /* not supported yet */ +#define SA_SIGINFO 0x00000004 +#define SA_ONSTACK 0x08000000 +#define SA_RESTART 0x10000000 +#define SA_NODEFER 0x40000000 +#define SA_RESETHAND 0x80000000 + +#define SA_NOMASK SA_NODEFER +#define SA_ONESHOT SA_RESETHAND + +#define SA_RESTORER 0x04000000 + +/* + * sigaltstack controls + */ +#define SS_ONSTACK 1 +#define SS_DISABLE 2 + +#define MINSIGSTKSZ 2048 +#define SIGSTKSZ 8192 + +#include <asm-generic/signal.h> + +#ifdef __KERNEL__ +struct old_sigaction { + __sighandler_t sa_handler; + old_sigset_t sa_mask; + unsigned long sa_flags; + __sigrestore_t sa_restorer; +}; + +struct sigaction { + __sighandler_t sa_handler; + unsigned long sa_flags; + __sigrestore_t sa_restorer; + sigset_t sa_mask; /* mask last for extensibility */ +}; + +struct k_sigaction { + struct sigaction sa; +}; +#else +/* Here we must cater to libcs that poke about in kernel headers. */ + +struct sigaction { + union { + __sighandler_t _sa_handler; + void (*_sa_sigaction)(int, struct siginfo *, void *); + } _u; + sigset_t sa_mask; + unsigned long sa_flags; + void (*sa_restorer)(void); +}; + +#define sa_handler _u._sa_handler +#define sa_sigaction _u._sa_sigaction + +#endif /* __KERNEL__ */ + +typedef struct sigaltstack { + void __user *ss_sp; + int ss_flags; + size_t ss_size; +} stack_t; + +#define ptrace_signal_deliver(regs, cookie) do { } while (0) + +#ifdef __KERNEL__ + +#include <asm/sigcontext.h> +#undef __HAVE_ARCH_SIG_BITOPS + +#endif /* __KERNEL__ */ + +#endif /* _ASM_SIGNAL_H */ diff --git a/arch/frv/include/asm/smp.h b/arch/frv/include/asm/smp.h new file mode 100644 index 00000000000..38349ec8b61 --- /dev/null +++ b/arch/frv/include/asm/smp.h @@ -0,0 +1,9 @@ +#ifndef __ASM_SMP_H +#define __ASM_SMP_H + + +#ifdef CONFIG_SMP +#error SMP not supported +#endif + +#endif diff --git a/arch/frv/include/asm/socket.h b/arch/frv/include/asm/socket.h new file mode 100644 index 00000000000..57c3d4054e8 --- /dev/null +++ b/arch/frv/include/asm/socket.h @@ -0,0 +1,61 @@ +#ifndef _ASM_SOCKET_H +#define _ASM_SOCKET_H + +#include <asm/sockios.h> + +/* For setsockopt(2) */ +#define SOL_SOCKET 1 + +#define SO_DEBUG 1 +#define SO_REUSEADDR 2 +#define SO_TYPE 3 +#define SO_ERROR 4 +#define SO_DONTROUTE 5 +#define SO_BROADCAST 6 +#define SO_SNDBUF 7 +#define SO_RCVBUF 8 +#define SO_SNDBUFFORCE 32 +#define SO_RCVBUFFORCE 33 +#define SO_KEEPALIVE 9 +#define SO_OOBINLINE 10 +#define SO_NO_CHECK 11 +#define SO_PRIORITY 12 +#define SO_LINGER 13 +#define SO_BSDCOMPAT 14 +/* To add :#define SO_REUSEPORT 15 */ +#define SO_PASSCRED 16 +#define SO_PEERCRED 17 +#define SO_RCVLOWAT 18 +#define SO_SNDLOWAT 19 +#define SO_RCVTIMEO 20 +#define SO_SNDTIMEO 21 + +/* Security levels - as per NRL IPv6 - don't actually do anything */ +#define SO_SECURITY_AUTHENTICATION 22 +#define SO_SECURITY_ENCRYPTION_TRANSPORT 23 +#define SO_SECURITY_ENCRYPTION_NETWORK 24 + +#define SO_BINDTODEVICE 25 + +/* Socket filtering */ +#define SO_ATTACH_FILTER 26 +#define SO_DETACH_FILTER 27 + +#define SO_PEERNAME 28 +#define SO_TIMESTAMP 29 +#define SCM_TIMESTAMP SO_TIMESTAMP + +#define SO_ACCEPTCONN 30 + +#define SO_PEERSEC 31 +#define SO_PASSSEC 34 +#define SO_TIMESTAMPNS 35 +#define SCM_TIMESTAMPNS SO_TIMESTAMPNS + +#define SO_MARK 36 + +#define SO_TIMESTAMPING 37 +#define SCM_TIMESTAMPING SO_TIMESTAMPING + +#endif /* _ASM_SOCKET_H */ + diff --git a/arch/frv/include/asm/sockios.h b/arch/frv/include/asm/sockios.h new file mode 100644 index 00000000000..5dbdd13e6de --- /dev/null +++ b/arch/frv/include/asm/sockios.h @@ -0,0 +1,14 @@ +#ifndef _ASM_SOCKIOS__ +#define _ASM_SOCKIOS__ + +/* Socket-level I/O control calls. */ +#define FIOSETOWN 0x8901 +#define SIOCSPGRP 0x8902 +#define FIOGETOWN 0x8903 +#define SIOCGPGRP 0x8904 +#define SIOCATMARK 0x8905 +#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */ +#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */ + +#endif /* _ASM_SOCKIOS__ */ + diff --git a/arch/frv/include/asm/spinlock.h b/arch/frv/include/asm/spinlock.h new file mode 100644 index 00000000000..fe385f45d1f --- /dev/null +++ b/arch/frv/include/asm/spinlock.h @@ -0,0 +1,17 @@ +/* spinlock.h: spinlocks for FR-V + * + * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_SPINLOCK_H +#define _ASM_SPINLOCK_H + +#error no spinlocks for FR-V yet + +#endif /* _ASM_SPINLOCK_H */ diff --git a/arch/frv/include/asm/spr-regs.h b/arch/frv/include/asm/spr-regs.h new file mode 100644 index 00000000000..01e6af5e99b --- /dev/null +++ b/arch/frv/include/asm/spr-regs.h @@ -0,0 +1,416 @@ +/* spr-regs.h: special-purpose registers on the FRV + * + * Copyright (C) 2003, 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_SPR_REGS_H +#define _ASM_SPR_REGS_H + +/* + * PSR - Processor Status Register + */ +#define PSR_ET 0x00000001 /* enable interrupts/exceptions flag */ +#define PSR_PS 0x00000002 /* previous supervisor mode flag */ +#define PSR_S 0x00000004 /* supervisor mode flag */ +#define PSR_PIL 0x00000078 /* processor external interrupt level */ +#define PSR_PIL_0 0x00000000 /* - no interrupt in progress */ +#define PSR_PIL_13 0x00000068 /* - debugging only */ +#define PSR_PIL_14 0x00000070 /* - debugging in progress */ +#define PSR_PIL_15 0x00000078 /* - NMI in progress */ +#define PSR_EM 0x00000080 /* enable media operation */ +#define PSR_EF 0x00000100 /* enable FPU operation */ +#define PSR_BE 0x00001000 /* endianness mode */ +#define PSR_BE_LE 0x00000000 /* - little endian mode */ +#define PSR_BE_BE 0x00001000 /* - big endian mode */ +#define PSR_CM 0x00002000 /* conditional mode */ +#define PSR_NEM 0x00004000 /* non-excepting mode */ +#define PSR_ICE 0x00010000 /* in-circuit emulation mode */ +#define PSR_VERSION_SHIFT 24 /* CPU silicon ID */ +#define PSR_IMPLE_SHIFT 28 /* CPU core ID */ + +#define PSR_VERSION(psr) (((psr) >> PSR_VERSION_SHIFT) & 0xf) +#define PSR_IMPLE(psr) (((psr) >> PSR_IMPLE_SHIFT) & 0xf) + +#define PSR_IMPLE_FR401 0x2 +#define PSR_VERSION_FR401_MB93401 0x0 +#define PSR_VERSION_FR401_MB93401A 0x1 +#define PSR_VERSION_FR401_MB93403 0x2 + +#define PSR_IMPLE_FR405 0x4 +#define PSR_VERSION_FR405_MB93405 0x0 + +#define PSR_IMPLE_FR451 0x5 +#define PSR_VERSION_FR451_MB93451 0x0 + +#define PSR_IMPLE_FR501 0x1 +#define PSR_VERSION_FR501_MB93501 0x1 +#define PSR_VERSION_FR501_MB93501A 0x2 + +#define PSR_IMPLE_FR551 0x3 +#define PSR_VERSION_FR551_MB93555 0x1 + +#define __get_PSR() ({ unsigned long x; asm volatile("movsg psr,%0" : "=r"(x)); x; }) +#define __set_PSR(V) do { asm volatile("movgs %0,psr" : : "r"(V)); } while(0) + +/* + * TBR - Trap Base Register + */ +#define TBR_TT 0x00000ff0 +#define TBR_TT_INSTR_MMU_MISS (0x01 << 4) +#define TBR_TT_INSTR_ACC_ERROR (0x02 << 4) +#define TBR_TT_INSTR_ACC_EXCEP (0x03 << 4) +#define TBR_TT_PRIV_INSTR (0x06 << 4) +#define TBR_TT_ILLEGAL_INSTR (0x07 << 4) +#define TBR_TT_FP_EXCEPTION (0x0d << 4) +#define TBR_TT_MP_EXCEPTION (0x0e << 4) +#define TBR_TT_DATA_ACC_ERROR (0x11 << 4) +#define TBR_TT_DATA_MMU_MISS (0x12 << 4) +#define TBR_TT_DATA_ACC_EXCEP (0x13 << 4) +#define TBR_TT_DATA_STR_ERROR (0x14 << 4) +#define TBR_TT_DIVISION_EXCEP (0x17 << 4) +#define TBR_TT_COMMIT_EXCEP (0x19 << 4) +#define TBR_TT_INSTR_TLB_MISS (0x1a << 4) +#define TBR_TT_DATA_TLB_MISS (0x1b << 4) +#define TBR_TT_DATA_DAT_EXCEP (0x1d << 4) +#define TBR_TT_DECREMENT_TIMER (0x1f << 4) +#define TBR_TT_COMPOUND_EXCEP (0x20 << 4) +#define TBR_TT_INTERRUPT_1 (0x21 << 4) +#define TBR_TT_INTERRUPT_2 (0x22 << 4) +#define TBR_TT_INTERRUPT_3 (0x23 << 4) +#define TBR_TT_INTERRUPT_4 (0x24 << 4) +#define TBR_TT_INTERRUPT_5 (0x25 << 4) +#define TBR_TT_INTERRUPT_6 (0x26 << 4) +#define TBR_TT_INTERRUPT_7 (0x27 << 4) +#define TBR_TT_INTERRUPT_8 (0x28 << 4) +#define TBR_TT_INTERRUPT_9 (0x29 << 4) +#define TBR_TT_INTERRUPT_10 (0x2a << 4) +#define TBR_TT_INTERRUPT_11 (0x2b << 4) +#define TBR_TT_INTERRUPT_12 (0x2c << 4) +#define TBR_TT_INTERRUPT_13 (0x2d << 4) +#define TBR_TT_INTERRUPT_14 (0x2e << 4) +#define TBR_TT_INTERRUPT_15 (0x2f << 4) +#define TBR_TT_TRAP0 (0x80 << 4) +#define TBR_TT_TRAP1 (0x81 << 4) +#define TBR_TT_TRAP2 (0x82 << 4) +#define TBR_TT_TRAP3 (0x83 << 4) +#define TBR_TT_TRAP120 (0xf8 << 4) +#define TBR_TT_TRAP121 (0xf9 << 4) +#define TBR_TT_TRAP122 (0xfa << 4) +#define TBR_TT_TRAP123 (0xfb << 4) +#define TBR_TT_TRAP124 (0xfc << 4) +#define TBR_TT_TRAP125 (0xfd << 4) +#define TBR_TT_TRAP126 (0xfe << 4) +#define TBR_TT_BREAK (0xff << 4) + +#define TBR_TT_ATOMIC_CMPXCHG32 TBR_TT_TRAP120 +#define TBR_TT_ATOMIC_XCHG32 TBR_TT_TRAP121 +#define TBR_TT_ATOMIC_XOR TBR_TT_TRAP122 +#define TBR_TT_ATOMIC_OR TBR_TT_TRAP123 +#define TBR_TT_ATOMIC_AND TBR_TT_TRAP124 +#define TBR_TT_ATOMIC_SUB TBR_TT_TRAP125 +#define TBR_TT_ATOMIC_ADD TBR_TT_TRAP126 + +#define __get_TBR() ({ unsigned long x; asm volatile("movsg tbr,%0" : "=r"(x)); x; }) + +/* + * HSR0 - Hardware Status Register 0 + */ +#define HSR0_PDM 0x00000007 /* power down mode */ +#define HSR0_PDM_NORMAL 0x00000000 /* - normal mode */ +#define HSR0_PDM_CORE_SLEEP 0x00000001 /* - CPU core sleep mode */ +#define HSR0_PDM_BUS_SLEEP 0x00000003 /* - bus sleep mode */ +#define HSR0_PDM_PLL_RUN 0x00000005 /* - PLL run */ +#define HSR0_PDM_PLL_STOP 0x00000007 /* - PLL stop */ +#define HSR0_GRLE 0x00000040 /* GR lower register set enable */ +#define HSR0_GRHE 0x00000080 /* GR higher register set enable */ +#define HSR0_FRLE 0x00000100 /* FR lower register set enable */ +#define HSR0_FRHE 0x00000200 /* FR higher register set enable */ +#define HSR0_GRN 0x00000400 /* GR quantity */ +#define HSR0_GRN_64 0x00000000 /* - 64 GR registers */ +#define HSR0_GRN_32 0x00000400 /* - 32 GR registers */ +#define HSR0_FRN 0x00000800 /* FR quantity */ +#define HSR0_FRN_64 0x00000000 /* - 64 FR registers */ +#define HSR0_FRN_32 0x00000800 /* - 32 FR registers */ +#define HSR0_SA 0x00001000 /* start address (RAMBOOT#) */ +#define HSR0_ETMI 0x00008000 /* enable TIMERI (64-bit up timer) */ +#define HSR0_ETMD 0x00004000 /* enable TIMERD (32-bit down timer) */ +#define HSR0_PEDAT 0x00010000 /* previous DAT mode */ +#define HSR0_XEDAT 0x00020000 /* exception DAT mode */ +#define HSR0_EDAT 0x00080000 /* enable DAT mode */ +#define HSR0_RME 0x00400000 /* enable RAM mode */ +#define HSR0_EMEM 0x00800000 /* enable MMU_Miss mask */ +#define HSR0_EXMMU 0x01000000 /* enable extended MMU mode */ +#define HSR0_EDMMU 0x02000000 /* enable data MMU */ +#define HSR0_EIMMU 0x04000000 /* enable instruction MMU */ +#define HSR0_CBM 0x08000000 /* copy back mode */ +#define HSR0_CBM_WRITE_THRU 0x00000000 /* - write through */ +#define HSR0_CBM_COPY_BACK 0x08000000 /* - copy back */ +#define HSR0_NWA 0x10000000 /* no write allocate */ +#define HSR0_DCE 0x40000000 /* data cache enable */ +#define HSR0_ICE 0x80000000 /* instruction cache enable */ + +#define __get_HSR(R) ({ unsigned long x; asm volatile("movsg hsr"#R",%0" : "=r"(x)); x; }) +#define __set_HSR(R,V) do { asm volatile("movgs %0,hsr"#R : : "r"(V)); } while(0) + +/* + * CCR - Condition Codes Register + */ +#define CCR_FCC0 0x0000000f /* FP/Media condition 0 (fcc0 reg) */ +#define CCR_FCC1 0x000000f0 /* FP/Media condition 1 (fcc1 reg) */ +#define CCR_FCC2 0x00000f00 /* FP/Media condition 2 (fcc2 reg) */ +#define CCR_FCC3 0x0000f000 /* FP/Media condition 3 (fcc3 reg) */ +#define CCR_ICC0 0x000f0000 /* Integer condition 0 (icc0 reg) */ +#define CCR_ICC0_C 0x00010000 /* - Carry flag */ +#define CCR_ICC0_V 0x00020000 /* - Overflow flag */ +#define CCR_ICC0_Z 0x00040000 /* - Zero flag */ +#define CCR_ICC0_N 0x00080000 /* - Negative flag */ +#define CCR_ICC1 0x00f00000 /* Integer condition 1 (icc1 reg) */ +#define CCR_ICC2 0x0f000000 /* Integer condition 2 (icc2 reg) */ +#define CCR_ICC3 0xf0000000 /* Integer condition 3 (icc3 reg) */ + +/* + * CCCR - Condition Codes for Conditional Instructions Register + */ +#define CCCR_CC0 0x00000003 /* condition 0 (cc0 reg) */ +#define CCCR_CC0_FALSE 0x00000002 /* - condition is false */ +#define CCCR_CC0_TRUE 0x00000003 /* - condition is true */ +#define CCCR_CC1 0x0000000c /* condition 1 (cc1 reg) */ +#define CCCR_CC2 0x00000030 /* condition 2 (cc2 reg) */ +#define CCCR_CC3 0x000000c0 /* condition 3 (cc3 reg) */ +#define CCCR_CC4 0x00000300 /* condition 4 (cc4 reg) */ +#define CCCR_CC5 0x00000c00 /* condition 5 (cc5 reg) */ +#define CCCR_CC6 0x00003000 /* condition 6 (cc6 reg) */ +#define CCCR_CC7 0x0000c000 /* condition 7 (cc7 reg) */ + +/* + * ISR - Integer Status Register + */ +#define ISR_EMAM 0x00000001 /* memory misaligned access handling */ +#define ISR_EMAM_EXCEPTION 0x00000000 /* - generate exception */ +#define ISR_EMAM_FUDGE 0x00000001 /* - mask out invalid address bits */ +#define ISR_AEXC 0x00000004 /* accrued [overflow] exception */ +#define ISR_DTT 0x00000018 /* division type trap */ +#define ISR_DTT_IGNORE 0x00000000 /* - ignore division error */ +#define ISR_DTT_DIVBYZERO 0x00000008 /* - generate exception */ +#define ISR_DTT_OVERFLOW 0x00000010 /* - record overflow */ +#define ISR_EDE 0x00000020 /* enable division exception */ +#define ISR_PLI 0x20000000 /* pre-load instruction information */ +#define ISR_QI 0x80000000 /* quad data implementation information */ + +/* + * EPCR0 - Exception PC Register + */ +#define EPCR0_V 0x00000001 /* register content validity indicator */ +#define EPCR0_PC 0xfffffffc /* faulting instruction address */ + +/* + * ESR0/14/15 - Exception Status Register + */ +#define ESRx_VALID 0x00000001 /* register content validity indicator */ +#define ESRx_EC 0x0000003e /* exception type */ +#define ESRx_EC_DATA_STORE 0x00000000 /* - data_store_error */ +#define ESRx_EC_INSN_ACCESS 0x00000006 /* - instruction_access_error */ +#define ESRx_EC_PRIV_INSN 0x00000008 /* - privileged_instruction */ +#define ESRx_EC_ILL_INSN 0x0000000a /* - illegal_instruction */ +#define ESRx_EC_MP_EXCEP 0x0000001c /* - mp_exception */ +#define ESRx_EC_DATA_ACCESS 0x00000020 /* - data_access_error */ +#define ESRx_EC_DIVISION 0x00000026 /* - division_exception */ +#define ESRx_EC_ITLB_MISS 0x00000034 /* - instruction_access_TLB_miss */ +#define ESRx_EC_DTLB_MISS 0x00000036 /* - data_access_TLB_miss */ +#define ESRx_EC_DATA_ACCESS_DAT 0x0000003a /* - data_access_DAT_exception */ + +#define ESR0_IAEC 0x00000100 /* info for instruction-access-exception */ +#define ESR0_IAEC_RESV 0x00000000 /* - reserved */ +#define ESR0_IAEC_PROT_VIOL 0x00000100 /* - protection violation */ + +#define ESR0_ATXC 0x00f00000 /* address translation exception code */ +#define ESR0_ATXC_MMU_MISS 0x00000000 /* - MMU miss exception and more (?) */ +#define ESR0_ATXC_MULTI_DAT 0x00800000 /* - multiple DAT entry hit */ +#define ESR0_ATXC_MULTI_SAT 0x00900000 /* - multiple SAT entry hit */ +#define ESR0_ATXC_AMRTLB_MISS 0x00a00000 /* - MMU/TLB miss exception */ +#define ESR0_ATXC_PRIV_EXCEP 0x00c00000 /* - privilege protection fault */ +#define ESR0_ATXC_WP_EXCEP 0x00d00000 /* - write protection fault */ + +#define ESR0_EAV 0x00000800 /* true if EAR0 register valid */ +#define ESR15_EAV 0x00000800 /* true if EAR15 register valid */ + +/* + * ESFR1 - Exception Status Valid Flag Register + */ +#define ESFR1_ESR0 0x00000001 /* true if ESR0 is valid */ +#define ESFR1_ESR14 0x00004000 /* true if ESR14 is valid */ +#define ESFR1_ESR15 0x00008000 /* true if ESR15 is valid */ + +/* + * MSR - Media Status Register + */ +#define MSR0_AOVF 0x00000001 /* overflow exception accrued */ +#define MSRx_OVF 0x00000002 /* overflow exception detected */ +#define MSRx_SIE 0x0000003c /* last SIMD instruction exception detected */ +#define MSRx_SIE_NONE 0x00000000 /* - none detected */ +#define MSRx_SIE_FRkHI_ACCk 0x00000020 /* - exception at FRkHI or ACCk */ +#define MSRx_SIE_FRkLO_ACCk1 0x00000010 /* - exception at FRkLO or ACCk+1 */ +#define MSRx_SIE_FRk1HI_ACCk2 0x00000008 /* - exception at FRk+1HI or ACCk+2 */ +#define MSRx_SIE_FRk1LO_ACCk3 0x00000004 /* - exception at FRk+1LO or ACCk+3 */ +#define MSR0_MTT 0x00007000 /* type of last media trap detected */ +#define MSR0_MTT_NONE 0x00000000 /* - none detected */ +#define MSR0_MTT_OVERFLOW 0x00001000 /* - overflow detected */ +#define MSR0_HI 0x00c00000 /* hardware implementation */ +#define MSR0_HI_ROUNDING 0x00000000 /* - rounding mode */ +#define MSR0_HI_NONROUNDING 0x00c00000 /* - non-rounding mode */ +#define MSR0_EMCI 0x01000000 /* enable media custom instructions */ +#define MSR0_SRDAV 0x10000000 /* select rounding mode of MAVEH */ +#define MSR0_SRDAV_RDAV 0x00000000 /* - controlled by MSR.RDAV */ +#define MSR0_SRDAV_RD 0x10000000 /* - controlled by MSR.RD */ +#define MSR0_RDAV 0x20000000 /* rounding mode of MAVEH */ +#define MSR0_RDAV_NEAREST_MI 0x00000000 /* - round to nearest minus */ +#define MSR0_RDAV_NEAREST_PL 0x20000000 /* - round to nearest plus */ +#define MSR0_RD 0xc0000000 /* rounding mode */ +#define MSR0_RD_NEAREST 0x00000000 /* - nearest */ +#define MSR0_RD_ZERO 0x40000000 /* - zero */ +#define MSR0_RD_POS_INF 0x80000000 /* - postive infinity */ +#define MSR0_RD_NEG_INF 0xc0000000 /* - negative infinity */ + +/* + * IAMPR0-7 - Instruction Address Mapping Register + * DAMPR0-7 - Data Address Mapping Register + */ +#define xAMPRx_V 0x00000001 /* register content validity indicator */ +#define DAMPRx_WP 0x00000002 /* write protect */ +#define DAMPRx_WP_RW 0x00000000 /* - read/write */ +#define DAMPRx_WP_RO 0x00000002 /* - read-only */ +#define xAMPRx_C 0x00000004 /* cached/uncached */ +#define xAMPRx_C_CACHED 0x00000000 /* - cached */ +#define xAMPRx_C_UNCACHED 0x00000004 /* - uncached */ +#define xAMPRx_S 0x00000008 /* supervisor only */ +#define xAMPRx_S_USER 0x00000000 /* - userspace can access */ +#define xAMPRx_S_KERNEL 0x00000008 /* - kernel only */ +#define xAMPRx_SS 0x000000f0 /* segment size */ +#define xAMPRx_SS_16Kb 0x00000000 /* - 16 kilobytes */ +#define xAMPRx_SS_64Kb 0x00000010 /* - 64 kilobytes */ +#define xAMPRx_SS_256Kb 0x00000020 /* - 256 kilobytes */ +#define xAMPRx_SS_1Mb 0x00000030 /* - 1 megabyte */ +#define xAMPRx_SS_2Mb 0x00000040 /* - 2 megabytes */ +#define xAMPRx_SS_4Mb 0x00000050 /* - 4 megabytes */ +#define xAMPRx_SS_8Mb 0x00000060 /* - 8 megabytes */ +#define xAMPRx_SS_16Mb 0x00000070 /* - 16 megabytes */ +#define xAMPRx_SS_32Mb 0x00000080 /* - 32 megabytes */ +#define xAMPRx_SS_64Mb 0x00000090 /* - 64 megabytes */ +#define xAMPRx_SS_128Mb 0x000000a0 /* - 128 megabytes */ +#define xAMPRx_SS_256Mb 0x000000b0 /* - 256 megabytes */ +#define xAMPRx_SS_512Mb 0x000000c0 /* - 512 megabytes */ +#define xAMPRx_RESERVED8 0x00000100 /* reserved bit */ +#define xAMPRx_NG 0x00000200 /* non-global */ +#define xAMPRx_L 0x00000400 /* locked */ +#define xAMPRx_M 0x00000800 /* modified */ +#define xAMPRx_D 0x00001000 /* DAT entry */ +#define xAMPRx_RESERVED13 0x00002000 /* reserved bit */ +#define xAMPRx_PPFN 0xfff00000 /* physical page frame number */ + +#define xAMPRx_V_BIT 0 +#define DAMPRx_WP_BIT 1 +#define xAMPRx_C_BIT 2 +#define xAMPRx_S_BIT 3 +#define xAMPRx_RESERVED8_BIT 8 +#define xAMPRx_NG_BIT 9 +#define xAMPRx_L_BIT 10 +#define xAMPRx_M_BIT 11 +#define xAMPRx_D_BIT 12 +#define xAMPRx_RESERVED13_BIT 13 + +#define __get_IAMPR(R) ({ unsigned long x; asm volatile("movsg iampr"#R",%0" : "=r"(x)); x; }) +#define __get_DAMPR(R) ({ unsigned long x; asm volatile("movsg dampr"#R",%0" : "=r"(x)); x; }) + +#define __get_IAMLR(R) ({ unsigned long x; asm volatile("movsg iamlr"#R",%0" : "=r"(x)); x; }) +#define __get_DAMLR(R) ({ unsigned long x; asm volatile("movsg damlr"#R",%0" : "=r"(x)); x; }) + +#define __set_IAMPR(R,V) do { asm volatile("movgs %0,iampr"#R : : "r"(V)); } while(0) +#define __set_DAMPR(R,V) do { asm volatile("movgs %0,dampr"#R : : "r"(V)); } while(0) + +#define __set_IAMLR(R,V) do { asm volatile("movgs %0,iamlr"#R : : "r"(V)); } while(0) +#define __set_DAMLR(R,V) do { asm volatile("movgs %0,damlr"#R : : "r"(V)); } while(0) + +#define save_dampr(R, _dampr) \ +do { \ + asm volatile("movsg dampr"R",%0" : "=r"(_dampr)); \ +} while(0) + +#define restore_dampr(R, _dampr) \ +do { \ + asm volatile("movgs %0,dampr"R :: "r"(_dampr)); \ +} while(0) + +/* + * AMCR - Address Mapping Control Register + */ +#define AMCR_IAMRN 0x000000ff /* quantity of IAMPR registers */ +#define AMCR_DAMRN 0x0000ff00 /* quantity of DAMPR registers */ + +/* + * TTBR - Address Translation Table Base Register + */ +#define __get_TTBR() ({ unsigned long x; asm volatile("movsg ttbr,%0" : "=r"(x)); x; }) + +/* + * TPXR - TLB Probe Extend Register + */ +#define TPXR_E 0x00000001 +#define TPXR_LMAX_SHIFT 20 +#define TPXR_LMAX_SMASK 0xf +#define TPXR_WMAX_SHIFT 24 +#define TPXR_WMAX_SMASK 0xf +#define TPXR_WAY_SHIFT 28 +#define TPXR_WAY_SMASK 0xf + +/* + * DCR - Debug Control Register + */ +#define DCR_IBCE3 0x00000001 /* break on conditional insn pointed to by IBAR3 */ +#define DCR_IBE3 0x00000002 /* break on insn pointed to by IBAR3 */ +#define DCR_IBCE1 0x00000004 /* break on conditional insn pointed to by IBAR2 */ +#define DCR_IBE1 0x00000008 /* break on insn pointed to by IBAR2 */ +#define DCR_IBCE2 0x00000010 /* break on conditional insn pointed to by IBAR1 */ +#define DCR_IBE2 0x00000020 /* break on insn pointed to by IBAR1 */ +#define DCR_IBCE0 0x00000040 /* break on conditional insn pointed to by IBAR0 */ +#define DCR_IBE0 0x00000080 /* break on insn pointed to by IBAR0 */ + +#define DCR_DDBE1 0x00004000 /* use DBDR1x when checking DBAR1 */ +#define DCR_DWBE1 0x00008000 /* break on store to address in DBAR1/DBMR1x */ +#define DCR_DRBE1 0x00010000 /* break on load from address in DBAR1/DBMR1x */ +#define DCR_DDBE0 0x00020000 /* use DBDR0x when checking DBAR0 */ +#define DCR_DWBE0 0x00040000 /* break on store to address in DBAR0/DBMR0x */ +#define DCR_DRBE0 0x00080000 /* break on load from address in DBAR0/DBMR0x */ + +#define DCR_EIM 0x0c000000 /* external interrupt disable */ +#define DCR_IBM 0x10000000 /* instruction break disable */ +#define DCR_SE 0x20000000 /* single step enable */ +#define DCR_EBE 0x40000000 /* exception break enable */ + +/* + * BRR - Break Interrupt Request Register + */ +#define BRR_ST 0x00000001 /* single-step detected */ +#define BRR_SB 0x00000002 /* break instruction detected */ +#define BRR_BB 0x00000004 /* branch with hint detected */ +#define BRR_CBB 0x00000008 /* branch to LR detected */ +#define BRR_IBx 0x000000f0 /* hardware breakpoint detected */ +#define BRR_DBx 0x00000f00 /* hardware watchpoint detected */ +#define BRR_DBNEx 0x0000f000 /* ? */ +#define BRR_EBTT 0x00ff0000 /* trap type of exception break */ +#define BRR_TB 0x10000000 /* external break request detected */ +#define BRR_CB 0x20000000 /* ICE break command detected */ +#define BRR_EB 0x40000000 /* exception break detected */ + +/* + * BPSR - Break PSR Save Register + */ +#define BPSR_BET 0x00000001 /* former PSR.ET */ +#define BPSR_BS 0x00001000 /* former PSR.S */ + +#endif /* _ASM_SPR_REGS_H */ diff --git a/arch/frv/include/asm/stat.h b/arch/frv/include/asm/stat.h new file mode 100644 index 00000000000..ce56de9b37b --- /dev/null +++ b/arch/frv/include/asm/stat.h @@ -0,0 +1,100 @@ +#ifndef _ASM_STAT_H +#define _ASM_STAT_H + +struct __old_kernel_stat { + unsigned short st_dev; + unsigned short st_ino; + unsigned short st_mode; + unsigned short st_nlink; + unsigned short st_uid; + unsigned short st_gid; + unsigned short st_rdev; + unsigned long st_size; + unsigned long st_atime; + unsigned long st_mtime; + unsigned long st_ctime; +}; + +/* This matches struct stat in uClibc/glibc. */ +struct stat { + unsigned char __pad1[6]; + unsigned short st_dev; + + unsigned long __pad2; + unsigned long st_ino; + + unsigned short __pad3; + unsigned short st_mode; + unsigned short __pad4; + unsigned short st_nlink; + + unsigned short __pad5; + unsigned short st_uid; + unsigned short __pad6; + unsigned short st_gid; + + unsigned char __pad7[6]; + unsigned short st_rdev; + + unsigned long __pad8; + unsigned long st_size; + + unsigned long __pad9; /* align 64-bit st_blocks to 2-word */ + unsigned long st_blksize; + + unsigned long __pad10; /* future possible st_blocks high bits */ + unsigned long st_blocks; /* Number 512-byte blocks allocated. */ + + unsigned long __unused1; + unsigned long st_atime; + + unsigned long __unused2; + unsigned long st_mtime; + + unsigned long __unused3; + unsigned long st_ctime; + + unsigned long long __unused4; +}; + +/* This matches struct stat64 in uClibc/glibc. The layout is exactly + the same as that of struct stat above, with 64-bit types taking up + space that was formerly used by padding. stat syscalls are still + different from stat64, though, in that the former tests for + overflow. */ +struct stat64 { + unsigned char __pad1[6]; + unsigned short st_dev; + + unsigned long long st_ino; + + unsigned int st_mode; + unsigned int st_nlink; + + unsigned long st_uid; + unsigned long st_gid; + + unsigned char __pad2[6]; + unsigned short st_rdev; + + long long st_size; + + unsigned long __pad3; /* align 64-bit st_blocks to 2-word */ + unsigned long st_blksize; + + unsigned long __pad4; /* future possible st_blocks high bits */ + unsigned long st_blocks; /* Number 512-byte blocks allocated. */ + + unsigned long st_atime_nsec; + unsigned long st_atime; + + unsigned int st_mtime_nsec; + unsigned long st_mtime; + + unsigned long st_ctime_nsec; + unsigned long st_ctime; + + unsigned long long __unused4; +}; + +#endif /* _ASM_STAT_H */ diff --git a/arch/frv/include/asm/statfs.h b/arch/frv/include/asm/statfs.h new file mode 100644 index 00000000000..741f586045b --- /dev/null +++ b/arch/frv/include/asm/statfs.h @@ -0,0 +1,7 @@ +#ifndef _ASM_STATFS_H +#define _ASM_STATFS_H + +#include <asm-generic/statfs.h> + +#endif /* _ASM_STATFS_H */ + diff --git a/arch/frv/include/asm/string.h b/arch/frv/include/asm/string.h new file mode 100644 index 00000000000..5ed310f64b7 --- /dev/null +++ b/arch/frv/include/asm/string.h @@ -0,0 +1,51 @@ +/* string.h: FRV string handling + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_STRING_H_ +#define _ASM_STRING_H_ + +#ifdef __KERNEL__ /* only set these up for kernel code */ + +#define __HAVE_ARCH_MEMSET 1 +#define __HAVE_ARCH_MEMCPY 1 + +extern void *memset(void *, int, __kernel_size_t); +extern void *memcpy(void *, const void *, __kernel_size_t); + +#else /* KERNEL */ + +/* + * let user libraries deal with these, + * IMHO the kernel has no place defining these functions for user apps + */ + +#define __HAVE_ARCH_STRCPY 1 +#define __HAVE_ARCH_STRNCPY 1 +#define __HAVE_ARCH_STRCAT 1 +#define __HAVE_ARCH_STRNCAT 1 +#define __HAVE_ARCH_STRCMP 1 +#define __HAVE_ARCH_STRNCMP 1 +#define __HAVE_ARCH_STRNICMP 1 +#define __HAVE_ARCH_STRCHR 1 +#define __HAVE_ARCH_STRRCHR 1 +#define __HAVE_ARCH_STRSTR 1 +#define __HAVE_ARCH_STRLEN 1 +#define __HAVE_ARCH_STRNLEN 1 +#define __HAVE_ARCH_MEMSET 1 +#define __HAVE_ARCH_MEMCPY 1 +#define __HAVE_ARCH_MEMMOVE 1 +#define __HAVE_ARCH_MEMSCAN 1 +#define __HAVE_ARCH_MEMCMP 1 +#define __HAVE_ARCH_MEMCHR 1 +#define __HAVE_ARCH_STRTOK 1 + +#endif /* KERNEL */ +#endif /* _ASM_STRING_H_ */ diff --git a/arch/frv/include/asm/suspend.h b/arch/frv/include/asm/suspend.h new file mode 100644 index 00000000000..5fa7b5a6ee4 --- /dev/null +++ b/arch/frv/include/asm/suspend.h @@ -0,0 +1,20 @@ +/* suspend.h: suspension stuff + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_SUSPEND_H +#define _ASM_SUSPEND_H + +static inline int arch_prepare_suspend(void) +{ + return 0; +} + +#endif /* _ASM_SUSPEND_H */ diff --git a/arch/frv/include/asm/swab.h b/arch/frv/include/asm/swab.h new file mode 100644 index 00000000000..f305834b479 --- /dev/null +++ b/arch/frv/include/asm/swab.h @@ -0,0 +1,10 @@ +#ifndef _ASM_SWAB_H +#define _ASM_SWAB_H + +#include <linux/types.h> + +#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__) +# define __SWAB_64_THRU_32__ +#endif + +#endif /* _ASM_SWAB_H */ diff --git a/arch/frv/include/asm/system.h b/arch/frv/include/asm/system.h new file mode 100644 index 00000000000..7742ec000cc --- /dev/null +++ b/arch/frv/include/asm/system.h @@ -0,0 +1,301 @@ +/* system.h: FR-V CPU control definitions + * + * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_SYSTEM_H +#define _ASM_SYSTEM_H + +#include <linux/types.h> +#include <linux/linkage.h> +#include <linux/kernel.h> + +struct thread_struct; + +/* + * switch_to(prev, next) should switch from task `prev' to `next' + * `prev' will never be the same as `next'. + * The `mb' is to tell GCC not to cache `current' across this call. + */ +extern asmlinkage +struct task_struct *__switch_to(struct thread_struct *prev_thread, + struct thread_struct *next_thread, + struct task_struct *prev); + +#define switch_to(prev, next, last) \ +do { \ + (prev)->thread.sched_lr = \ + (unsigned long) __builtin_return_address(0); \ + (last) = __switch_to(&(prev)->thread, &(next)->thread, (prev)); \ + mb(); \ +} while(0) + +/* + * interrupt flag manipulation + * - use virtual interrupt management since touching the PSR is slow + * - ICC2.Z: T if interrupts virtually disabled + * - ICC2.C: F if interrupts really disabled + * - if Z==1 upon interrupt: + * - C is set to 0 + * - interrupts are really disabled + * - entry.S returns immediately + * - uses TIHI (TRAP if Z==0 && C==0) #2 to really reenable interrupts + * - if taken, the trap: + * - sets ICC2.C + * - enables interrupts + */ +#define local_irq_disable() \ +do { \ + /* set Z flag, but don't change the C flag */ \ + asm volatile(" andcc gr0,gr0,gr0,icc2 \n" \ + : \ + : \ + : "memory", "icc2" \ + ); \ +} while(0) + +#define local_irq_enable() \ +do { \ + /* clear Z flag and then test the C flag */ \ + asm volatile(" oricc gr0,#1,gr0,icc2 \n" \ + " tihi icc2,gr0,#2 \n" \ + : \ + : \ + : "memory", "icc2" \ + ); \ +} while(0) + +#define local_save_flags(flags) \ +do { \ + typecheck(unsigned long, flags); \ + asm volatile("movsg ccr,%0" \ + : "=r"(flags) \ + : \ + : "memory"); \ + \ + /* shift ICC2.Z to bit 0 */ \ + flags >>= 26; \ + \ + /* make flags 1 if interrupts disabled, 0 otherwise */ \ + flags &= 1UL; \ +} while(0) + +#define irqs_disabled() \ + ({unsigned long flags; local_save_flags(flags); !!flags; }) + +#define local_irq_save(flags) \ +do { \ + typecheck(unsigned long, flags); \ + local_save_flags(flags); \ + local_irq_disable(); \ +} while(0) + +#define local_irq_restore(flags) \ +do { \ + typecheck(unsigned long, flags); \ + \ + /* load the Z flag by turning 1 if disabled into 0 if disabled \ + * and thus setting the Z flag but not the C flag */ \ + asm volatile(" xoricc %0,#1,gr0,icc2 \n" \ + /* then test Z=0 and C=0 */ \ + " tihi icc2,gr0,#2 \n" \ + : \ + : "r"(flags) \ + : "memory", "icc2" \ + ); \ + \ +} while(0) + +/* + * real interrupt flag manipulation + */ +#define __local_irq_disable() \ +do { \ + unsigned long psr; \ + asm volatile(" movsg psr,%0 \n" \ + " andi %0,%2,%0 \n" \ + " ori %0,%1,%0 \n" \ + " movgs %0,psr \n" \ + : "=r"(psr) \ + : "i" (PSR_PIL_14), "i" (~PSR_PIL) \ + : "memory"); \ +} while(0) + +#define __local_irq_enable() \ +do { \ + unsigned long psr; \ + asm volatile(" movsg psr,%0 \n" \ + " andi %0,%1,%0 \n" \ + " movgs %0,psr \n" \ + : "=r"(psr) \ + : "i" (~PSR_PIL) \ + : "memory"); \ +} while(0) + +#define __local_save_flags(flags) \ +do { \ + typecheck(unsigned long, flags); \ + asm("movsg psr,%0" \ + : "=r"(flags) \ + : \ + : "memory"); \ +} while(0) + +#define __local_irq_save(flags) \ +do { \ + unsigned long npsr; \ + typecheck(unsigned long, flags); \ + asm volatile(" movsg psr,%0 \n" \ + " andi %0,%3,%1 \n" \ + " ori %1,%2,%1 \n" \ + " movgs %1,psr \n" \ + : "=r"(flags), "=r"(npsr) \ + : "i" (PSR_PIL_14), "i" (~PSR_PIL) \ + : "memory"); \ +} while(0) + +#define __local_irq_restore(flags) \ +do { \ + typecheck(unsigned long, flags); \ + asm volatile(" movgs %0,psr \n" \ + : \ + : "r" (flags) \ + : "memory"); \ +} while(0) + +#define __irqs_disabled() \ + ((__get_PSR() & PSR_PIL) >= PSR_PIL_14) + +/* + * Force strict CPU ordering. + */ +#define nop() asm volatile ("nop"::) +#define mb() asm volatile ("membar" : : :"memory") +#define rmb() asm volatile ("membar" : : :"memory") +#define wmb() asm volatile ("membar" : : :"memory") +#define read_barrier_depends() do { } while (0) + +#ifdef CONFIG_SMP +#define smp_mb() mb() +#define smp_rmb() rmb() +#define smp_wmb() wmb() +#define smp_read_barrier_depends() read_barrier_depends() +#define set_mb(var, value) \ + do { xchg(&var, (value)); } while (0) +#else +#define smp_mb() barrier() +#define smp_rmb() barrier() +#define smp_wmb() barrier() +#define smp_read_barrier_depends() do {} while(0) +#define set_mb(var, value) \ + do { var = (value); barrier(); } while (0) +#endif + +extern void die_if_kernel(const char *, ...) __attribute__((format(printf, 1, 2))); +extern void free_initmem(void); + +#define arch_align_stack(x) (x) + +/*****************************************************************************/ +/* + * compare and conditionally exchange value with memory + * - if (*ptr == test) then orig = *ptr; *ptr = test; + * - if (*ptr != test) then orig = *ptr; + */ +#ifndef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS + +#define cmpxchg(ptr, test, new) \ +({ \ + __typeof__(ptr) __xg_ptr = (ptr); \ + __typeof__(*(ptr)) __xg_orig, __xg_tmp; \ + __typeof__(*(ptr)) __xg_test = (test); \ + __typeof__(*(ptr)) __xg_new = (new); \ + \ + switch (sizeof(__xg_orig)) { \ + case 4: \ + asm volatile( \ + "0: \n" \ + " orcc gr0,gr0,gr0,icc3 \n" \ + " ckeq icc3,cc7 \n" \ + " ld.p %M0,%1 \n" \ + " orcr cc7,cc7,cc3 \n" \ + " sub%I4cc %1,%4,%2,icc0 \n" \ + " bne icc0,#0,1f \n" \ + " cst.p %3,%M0 ,cc3,#1 \n" \ + " corcc gr29,gr29,gr0 ,cc3,#1 \n" \ + " beq icc3,#0,0b \n" \ + "1: \n" \ + : "+U"(*__xg_ptr), "=&r"(__xg_orig), "=&r"(__xg_tmp) \ + : "r"(__xg_new), "NPr"(__xg_test) \ + : "memory", "cc7", "cc3", "icc3", "icc0" \ + ); \ + break; \ + \ + default: \ + __xg_orig = (__typeof__(__xg_orig))0; \ + asm volatile("break"); \ + break; \ + } \ + \ + __xg_orig; \ +}) + +#else + +extern uint32_t __cmpxchg_32(uint32_t *v, uint32_t test, uint32_t new); + +#define cmpxchg(ptr, test, new) \ +({ \ + __typeof__(ptr) __xg_ptr = (ptr); \ + __typeof__(*(ptr)) __xg_orig; \ + __typeof__(*(ptr)) __xg_test = (test); \ + __typeof__(*(ptr)) __xg_new = (new); \ + \ + switch (sizeof(__xg_orig)) { \ + case 4: __xg_orig = (__force __typeof__(*ptr)) \ + __cmpxchg_32((__force uint32_t *)__xg_ptr, \ + (__force uint32_t)__xg_test, \ + (__force uint32_t)__xg_new); break; \ + default: \ + __xg_orig = (__typeof__(__xg_orig))0; \ + asm volatile("break"); \ + break; \ + } \ + \ + __xg_orig; \ +}) + +#endif + +#include <asm-generic/cmpxchg-local.h> + +static inline unsigned long __cmpxchg_local(volatile void *ptr, + unsigned long old, + unsigned long new, int size) +{ + switch (size) { + case 4: + return cmpxchg((unsigned long *)ptr, old, new); + default: + return __cmpxchg_local_generic(ptr, old, new, size); + } + + return old; +} + +/* + * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make + * them available. + */ +#define cmpxchg_local(ptr, o, n) \ + ((__typeof__(*(ptr)))__cmpxchg_local((ptr), (unsigned long)(o), \ + (unsigned long)(n), sizeof(*(ptr)))) +#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) + +#endif /* _ASM_SYSTEM_H */ diff --git a/arch/frv/include/asm/termbits.h b/arch/frv/include/asm/termbits.h new file mode 100644 index 00000000000..5568492b508 --- /dev/null +++ b/arch/frv/include/asm/termbits.h @@ -0,0 +1,202 @@ +#ifndef _ASM_TERMBITS_H__ +#define _ASM_TERMBITS_H__ + +#include <linux/posix_types.h> + +typedef unsigned char cc_t; +typedef unsigned int speed_t; +typedef unsigned int tcflag_t; + +#define NCCS 19 +struct termios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ +}; + +struct termios2 { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + +struct ktermios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + +/* c_cc characters */ +#define VINTR 0 +#define VQUIT 1 +#define VERASE 2 +#define VKILL 3 +#define VEOF 4 +#define VTIME 5 +#define VMIN 6 +#define VSWTC 7 +#define VSTART 8 +#define VSTOP 9 +#define VSUSP 10 +#define VEOL 11 +#define VREPRINT 12 +#define VDISCARD 13 +#define VWERASE 14 +#define VLNEXT 15 +#define VEOL2 16 + + +/* c_iflag bits */ +#define IGNBRK 0000001 +#define BRKINT 0000002 +#define IGNPAR 0000004 +#define PARMRK 0000010 +#define INPCK 0000020 +#define ISTRIP 0000040 +#define INLCR 0000100 +#define IGNCR 0000200 +#define ICRNL 0000400 +#define IUCLC 0001000 +#define IXON 0002000 +#define IXANY 0004000 +#define IXOFF 0010000 +#define IMAXBEL 0020000 +#define IUTF8 0040000 + +/* c_oflag bits */ +#define OPOST 0000001 +#define OLCUC 0000002 +#define ONLCR 0000004 +#define OCRNL 0000010 +#define ONOCR 0000020 +#define ONLRET 0000040 +#define OFILL 0000100 +#define OFDEL 0000200 +#define NLDLY 0000400 +#define NL0 0000000 +#define NL1 0000400 +#define CRDLY 0003000 +#define CR0 0000000 +#define CR1 0001000 +#define CR2 0002000 +#define CR3 0003000 +#define TABDLY 0014000 +#define TAB0 0000000 +#define TAB1 0004000 +#define TAB2 0010000 +#define TAB3 0014000 +#define XTABS 0014000 +#define BSDLY 0020000 +#define BS0 0000000 +#define BS1 0020000 +#define VTDLY 0040000 +#define VT0 0000000 +#define VT1 0040000 +#define FFDLY 0100000 +#define FF0 0000000 +#define FF1 0100000 + +/* c_cflag bit meaning */ +#define CBAUD 0010017 +#define B0 0000000 /* hang up */ +#define B50 0000001 +#define B75 0000002 +#define B110 0000003 +#define B134 0000004 +#define B150 0000005 +#define B200 0000006 +#define B300 0000007 +#define B600 0000010 +#define B1200 0000011 +#define B1800 0000012 +#define B2400 0000013 +#define B4800 0000014 +#define B9600 0000015 +#define B19200 0000016 +#define B38400 0000017 +#define EXTA B19200 +#define EXTB B38400 +#define CSIZE 0000060 +#define CS5 0000000 +#define CS6 0000020 +#define CS7 0000040 +#define CS8 0000060 +#define CSTOPB 0000100 +#define CREAD 0000200 +#define PARENB 0000400 +#define PARODD 0001000 +#define HUPCL 0002000 +#define CLOCAL 0004000 +#define CBAUDEX 0010000 +#define BOTHER 0010000 +#define B57600 0010001 +#define B115200 0010002 +#define B230400 0010003 +#define B460800 0010004 +#define B500000 0010005 +#define B576000 0010006 +#define B921600 0010007 +#define B1000000 0010010 +#define B1152000 0010011 +#define B1500000 0010012 +#define B2000000 0010013 +#define B2500000 0010014 +#define B3000000 0010015 +#define B3500000 0010016 +#define B4000000 0010017 +#define CIBAUD 002003600000 /* Input baud rate */ +#define CTVB 004000000000 /* VisioBraille Terminal flow control */ +#define CMSPAR 010000000000 /* mark or space (stick) parity */ +#define CRTSCTS 020000000000 /* flow control */ + +#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ + +/* c_lflag bits */ +#define ISIG 0000001 +#define ICANON 0000002 +#define XCASE 0000004 +#define ECHO 0000010 +#define ECHOE 0000020 +#define ECHOK 0000040 +#define ECHONL 0000100 +#define NOFLSH 0000200 +#define TOSTOP 0000400 +#define ECHOCTL 0001000 +#define ECHOPRT 0002000 +#define ECHOKE 0004000 +#define FLUSHO 0010000 +#define PENDIN 0040000 +#define IEXTEN 0100000 + + +/* tcflow() and TCXONC use these */ +#define TCOOFF 0 +#define TCOON 1 +#define TCIOFF 2 +#define TCION 3 + +/* tcflush() and TCFLSH use these */ +#define TCIFLUSH 0 +#define TCOFLUSH 1 +#define TCIOFLUSH 2 + +/* tcsetattr uses these */ +#define TCSANOW 0 +#define TCSADRAIN 1 +#define TCSAFLUSH 2 + +#endif /* _ASM_TERMBITS_H__ */ + diff --git a/arch/frv/include/asm/termios.h b/arch/frv/include/asm/termios.h new file mode 100644 index 00000000000..a62fb587237 --- /dev/null +++ b/arch/frv/include/asm/termios.h @@ -0,0 +1,58 @@ +#ifndef _ASM_TERMIOS_H +#define _ASM_TERMIOS_H + +#include <asm/termbits.h> +#include <asm/ioctls.h> + +struct winsize { + unsigned short ws_row; + unsigned short ws_col; + unsigned short ws_xpixel; + unsigned short ws_ypixel; +}; + +#define NCC 8 +struct termio { + unsigned short c_iflag; /* input mode flags */ + unsigned short c_oflag; /* output mode flags */ + unsigned short c_cflag; /* control mode flags */ + unsigned short c_lflag; /* local mode flags */ + unsigned char c_line; /* line discipline */ + unsigned char c_cc[NCC]; /* control characters */ +}; + +#ifdef __KERNEL__ +/* intr=^C quit=^| erase=del kill=^U + eof=^D vtime=\0 vmin=\1 sxtc=\0 + start=^Q stop=^S susp=^Z eol=\0 + reprint=^R discard=^U werase=^W lnext=^V + eol2=\0 +*/ +#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0" +#endif + +/* modem lines */ +#define TIOCM_LE 0x001 +#define TIOCM_DTR 0x002 +#define TIOCM_RTS 0x004 +#define TIOCM_ST 0x008 +#define TIOCM_SR 0x010 +#define TIOCM_CTS 0x020 +#define TIOCM_CAR 0x040 +#define TIOCM_RNG 0x080 +#define TIOCM_DSR 0x100 +#define TIOCM_CD TIOCM_CAR +#define TIOCM_RI TIOCM_RNG +#define TIOCM_OUT1 0x2000 +#define TIOCM_OUT2 0x4000 +#define TIOCM_LOOP 0x8000 + +#define TIOCM_MODEM_BITS TIOCM_OUT2 /* IRDA support */ + +/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ + +#ifdef __KERNEL__ +#include <asm-generic/termios.h> +#endif + +#endif /* _ASM_TERMIOS_H */ diff --git a/arch/frv/include/asm/thread_info.h b/arch/frv/include/asm/thread_info.h new file mode 100644 index 00000000000..bb53ab753ff --- /dev/null +++ b/arch/frv/include/asm/thread_info.h @@ -0,0 +1,144 @@ +/* thread_info.h: description + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * Derived from include/asm-i386/thread_info.h + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_THREAD_INFO_H +#define _ASM_THREAD_INFO_H + +#ifdef __KERNEL__ + +#ifndef __ASSEMBLY__ +#include <asm/processor.h> +#endif + +#define THREAD_SIZE 8192 + +/* + * low level task data that entry.S needs immediate access to + * - this struct should fit entirely inside of one cache line + * - this struct shares the supervisor stack pages + * - if the contents of this structure are changed, the assembly constants must also be changed + */ +#ifndef __ASSEMBLY__ + +struct thread_info { + struct task_struct *task; /* main task structure */ + struct exec_domain *exec_domain; /* execution domain */ + unsigned long flags; /* low level flags */ + unsigned long status; /* thread-synchronous flags */ + __u32 cpu; /* current CPU */ + int preempt_count; /* 0 => preemptable, <0 => BUG */ + + mm_segment_t addr_limit; /* thread address space: + * 0-0xBFFFFFFF for user-thead + * 0-0xFFFFFFFF for kernel-thread + */ + struct restart_block restart_block; + + __u8 supervisor_stack[0]; +}; + +#else /* !__ASSEMBLY__ */ + +#include <asm/asm-offsets.h> + +#endif + +#define PREEMPT_ACTIVE 0x10000000 + +/* + * macros/functions for gaining access to the thread information structure + * + * preempt_count needs to be 1 initially, until the scheduler is functional. + */ +#ifndef __ASSEMBLY__ + +#define INIT_THREAD_INFO(tsk) \ +{ \ + .task = &tsk, \ + .exec_domain = &default_exec_domain, \ + .flags = 0, \ + .cpu = 0, \ + .preempt_count = 1, \ + .addr_limit = KERNEL_DS, \ + .restart_block = { \ + .fn = do_no_restart_syscall, \ + }, \ +} + +#define init_thread_info (init_thread_union.thread_info) +#define init_stack (init_thread_union.stack) + +/* how to get the thread information struct from C */ +register struct thread_info *__current_thread_info asm("gr15"); + +#define current_thread_info() ({ __current_thread_info; }) + +#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR + +/* thread information allocation */ +#ifdef CONFIG_DEBUG_STACK_USAGE +#define alloc_thread_info(tsk) \ + ({ \ + struct thread_info *ret; \ + \ + ret = kzalloc(THREAD_SIZE, GFP_KERNEL); \ + \ + ret; \ + }) +#else +#define alloc_thread_info(tsk) kmalloc(THREAD_SIZE, GFP_KERNEL) +#endif + +#define free_thread_info(info) kfree(info) + +#endif /* __ASSEMBLY__ */ + +/* + * thread information flags + * - these are process state flags that various assembly files may need to access + * - pending work-to-be-done flags are in LSW + * - other flags in MSW + */ +#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ +#define TIF_SIGPENDING 1 /* signal pending */ +#define TIF_NEED_RESCHED 2 /* rescheduling necessary */ +#define TIF_SINGLESTEP 3 /* restore singlestep on return to user mode */ +#define TIF_IRET 4 /* return with iret */ +#define TIF_RESTORE_SIGMASK 5 /* restore signal mask in do_signal() */ +#define TIF_POLLING_NRFLAG 16 /* true if poll_idle() is polling TIF_NEED_RESCHED */ +#define TIF_MEMDIE 17 /* OOM killer killed process */ +#define TIF_FREEZE 18 /* freezing for suspend */ + +#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) +#define _TIF_SIGPENDING (1 << TIF_SIGPENDING) +#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED) +#define _TIF_SINGLESTEP (1 << TIF_SINGLESTEP) +#define _TIF_IRET (1 << TIF_IRET) +#define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK) +#define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG) +#define _TIF_FREEZE (1 << TIF_FREEZE) + +#define _TIF_WORK_MASK 0x0000FFFE /* work to do on interrupt/exception return */ +#define _TIF_ALLWORK_MASK 0x0000FFFF /* work to do on any return to u-space */ + +/* + * Thread-synchronous status. + * + * This is different from the flags in that nobody else + * ever touches our thread-synchronous status, so we don't + * have to worry about atomic accesses. + */ +#define TS_USEDFPM 0x0001 /* FPU/Media was used by this task this quantum (SMP) */ + +#endif /* __KERNEL__ */ + +#endif /* _ASM_THREAD_INFO_H */ diff --git a/arch/frv/include/asm/timer-regs.h b/arch/frv/include/asm/timer-regs.h new file mode 100644 index 00000000000..6c5a871ce5e --- /dev/null +++ b/arch/frv/include/asm/timer-regs.h @@ -0,0 +1,106 @@ +/* timer-regs.h: hardware timer register definitions + * + * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_TIMER_REGS_H +#define _ASM_TIMER_REGS_H + +#include <asm/sections.h> + +extern unsigned long __nongprelbss __clkin_clock_speed_HZ; +extern unsigned long __nongprelbss __ext_bus_clock_speed_HZ; +extern unsigned long __nongprelbss __res_bus_clock_speed_HZ; +extern unsigned long __nongprelbss __sdram_clock_speed_HZ; +extern unsigned long __nongprelbss __core_bus_clock_speed_HZ; +extern unsigned long __nongprelbss __core_clock_speed_HZ; +extern unsigned long __nongprelbss __dsu_clock_speed_HZ; +extern unsigned long __nongprelbss __serial_clock_speed_HZ; + +#define __get_CLKC() ({ *(volatile unsigned long *)(0xfeff9a00); }) + +static inline void __set_CLKC(unsigned long v) +{ + int tmp; + + asm volatile(" st%I0.p %2,%M0 \n" + " setlos %3,%1 \n" + " membar \n" + "0: \n" + " subicc %1,#1,%1,icc0 \n" + " bnc icc0,#1,0b \n" + : "=m"(*(volatile unsigned long *) 0xfeff9a00), "=r"(tmp) + : "r"(v), "i"(256) + : "icc0"); +} + +#define __get_TCTR() ({ *(volatile unsigned long *)(0xfeff9418); }) +#define __get_TPRV() ({ *(volatile unsigned long *)(0xfeff9420); }) +#define __get_TPRCKSL() ({ *(volatile unsigned long *)(0xfeff9428); }) +#define __get_TCSR(T) ({ *(volatile unsigned long *)(0xfeff9400 + 8 * (T)); }) +#define __get_TxCKSL(T) ({ *(volatile unsigned long *)(0xfeff9430 + 8 * (T)); }) + +#define __get_TCSR_DATA(T) ({ __get_TCSR(T) >> 24; }) + +#define __set_TCTR(V) do { *(volatile unsigned long *)(0xfeff9418) = (V); mb(); } while(0) +#define __set_TPRV(V) do { *(volatile unsigned long *)(0xfeff9420) = (V) << 24; mb(); } while(0) +#define __set_TPRCKSL(V) do { *(volatile unsigned long *)(0xfeff9428) = (V); mb(); } while(0) +#define __set_TCSR(T,V) \ +do { *(volatile unsigned long *)(0xfeff9400 + 8 * (T)) = (V); mb(); } while(0) + +#define __set_TxCKSL(T,V) \ +do { *(volatile unsigned long *)(0xfeff9430 + 8 * (T)) = (V); mb(); } while(0) + +#define __set_TCSR_DATA(T,V) __set_TCSR(T, (V) << 24) +#define __set_TxCKSL_DATA(T,V) __set_TxCKSL(T, TxCKSL_EIGHT | __TxCKSL_SELECT((V))) + +/* clock control register */ +#define CLKC_CMODE 0x0f000000 +#define CLKC_SLPL 0x000f0000 +#define CLKC_P0 0x00000100 +#define CLKC_CM 0x00000003 + +#define CLKC_CMODE_s 24 + +/* timer control register - non-readback mode */ +#define TCTR_MODE_0 0x00000000 +#define TCTR_MODE_2 0x04000000 +#define TCTR_MODE_4 0x08000000 +#define TCTR_MODE_5 0x0a000000 +#define TCTR_RL_LATCH 0x00000000 +#define TCTR_RL_RW_LOW8 0x10000000 +#define TCTR_RL_RW_HIGH8 0x20000000 +#define TCTR_RL_RW_LH8 0x30000000 +#define TCTR_SC_CTR0 0x00000000 +#define TCTR_SC_CTR1 0x40000000 +#define TCTR_SC_CTR2 0x80000000 + +/* timer control register - readback mode */ +#define TCTR_CNT0 0x02000000 +#define TCTR_CNT1 0x04000000 +#define TCTR_CNT2 0x08000000 +#define TCTR_NSTATUS 0x10000000 +#define TCTR_NCOUNT 0x20000000 +#define TCTR_SC_READBACK 0xc0000000 + +/* timer control status registers - non-readback mode */ +#define TCSRx_DATA 0xff000000 + +/* timer control status registers - readback mode */ +#define TCSRx_OUTPUT 0x80000000 +#define TCSRx_NULLCOUNT 0x40000000 +#define TCSRx_RL 0x30000000 +#define TCSRx_MODE 0x07000000 + +/* timer clock select registers */ +#define TxCKSL_SELECT 0x0f000000 +#define __TxCKSL_SELECT(X) ((X) << 24) +#define TxCKSL_EIGHT 0xf0000000 + +#endif /* _ASM_TIMER_REGS_H */ diff --git a/arch/frv/include/asm/timex.h b/arch/frv/include/asm/timex.h new file mode 100644 index 00000000000..a89bddefdac --- /dev/null +++ b/arch/frv/include/asm/timex.h @@ -0,0 +1,20 @@ +/* timex.h: FR-V architecture timex specifications + */ +#ifndef _ASM_TIMEX_H +#define _ASM_TIMEX_H + +#define CLOCK_TICK_RATE 1193180 /* Underlying HZ */ +#define CLOCK_TICK_FACTOR 20 /* Factor of both 1000000 and CLOCK_TICK_RATE */ + +typedef unsigned long cycles_t; + +static inline cycles_t get_cycles(void) +{ + return 0; +} + +#define vxtime_lock() do {} while (0) +#define vxtime_unlock() do {} while (0) + +#endif + diff --git a/arch/frv/include/asm/tlb.h b/arch/frv/include/asm/tlb.h new file mode 100644 index 00000000000..cd458eb6d75 --- /dev/null +++ b/arch/frv/include/asm/tlb.h @@ -0,0 +1,27 @@ +#ifndef _ASM_TLB_H +#define _ASM_TLB_H + +#include <asm/tlbflush.h> + +#ifdef CONFIG_MMU +extern void check_pgt_cache(void); +#else +#define check_pgt_cache() do {} while(0) +#endif + +/* + * we don't need any special per-pte or per-vma handling... + */ +#define tlb_start_vma(tlb, vma) do { } while (0) +#define tlb_end_vma(tlb, vma) do { } while (0) +#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0) + +/* + * .. because we flush the whole mm when it fills up + */ +#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm) + +#include <asm-generic/tlb.h> + +#endif /* _ASM_TLB_H */ + diff --git a/arch/frv/include/asm/tlbflush.h b/arch/frv/include/asm/tlbflush.h new file mode 100644 index 00000000000..7ac5eafc5d9 --- /dev/null +++ b/arch/frv/include/asm/tlbflush.h @@ -0,0 +1,73 @@ +/* tlbflush.h: TLB flushing functions + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_TLBFLUSH_H +#define _ASM_TLBFLUSH_H + +#include <linux/mm.h> +#include <asm/processor.h> + +#ifdef CONFIG_MMU + +#ifndef __ASSEMBLY__ +extern void asmlinkage __flush_tlb_all(void); +extern void asmlinkage __flush_tlb_mm(unsigned long contextid); +extern void asmlinkage __flush_tlb_page(unsigned long contextid, unsigned long start); +extern void asmlinkage __flush_tlb_range(unsigned long contextid, + unsigned long start, unsigned long end); +#endif /* !__ASSEMBLY__ */ + +#define flush_tlb_all() \ +do { \ + preempt_disable(); \ + __flush_tlb_all(); \ + preempt_enable(); \ +} while(0) + +#define flush_tlb_mm(mm) \ +do { \ + preempt_disable(); \ + __flush_tlb_mm((mm)->context.id); \ + preempt_enable(); \ +} while(0) + +#define flush_tlb_range(vma,start,end) \ +do { \ + preempt_disable(); \ + __flush_tlb_range((vma)->vm_mm->context.id, start, end); \ + preempt_enable(); \ +} while(0) + +#define flush_tlb_page(vma,addr) \ +do { \ + preempt_disable(); \ + __flush_tlb_page((vma)->vm_mm->context.id, addr); \ + preempt_enable(); \ +} while(0) + + +#define __flush_tlb_global() flush_tlb_all() +#define flush_tlb() flush_tlb_all() +#define flush_tlb_kernel_range(start, end) flush_tlb_all() + +#else + +#define flush_tlb() BUG() +#define flush_tlb_all() BUG() +#define flush_tlb_mm(mm) BUG() +#define flush_tlb_page(vma,addr) BUG() +#define flush_tlb_range(mm,start,end) BUG() +#define flush_tlb_kernel_range(start, end) BUG() + +#endif + + +#endif /* _ASM_TLBFLUSH_H */ diff --git a/arch/frv/include/asm/topology.h b/arch/frv/include/asm/topology.h new file mode 100644 index 00000000000..94272435270 --- /dev/null +++ b/arch/frv/include/asm/topology.h @@ -0,0 +1,12 @@ +#ifndef _ASM_TOPOLOGY_H +#define _ASM_TOPOLOGY_H + +#ifdef CONFIG_NUMA + +#error NUMA not supported yet + +#endif /* CONFIG_NUMA */ + +#include <asm-generic/topology.h> + +#endif /* _ASM_TOPOLOGY_H */ diff --git a/arch/frv/include/asm/types.h b/arch/frv/include/asm/types.h new file mode 100644 index 00000000000..613bf1e962f --- /dev/null +++ b/arch/frv/include/asm/types.h @@ -0,0 +1,40 @@ +/* types.h: FRV types + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_TYPES_H +#define _ASM_TYPES_H + +#include <asm-generic/int-ll64.h> + +#ifndef __ASSEMBLY__ + +typedef unsigned short umode_t; + +#endif /* __ASSEMBLY__ */ + +/* + * These aren't exported outside the kernel to avoid name space clashes + */ +#ifdef __KERNEL__ + +#define BITS_PER_LONG 32 + +#ifndef __ASSEMBLY__ + +/* Dma addresses are 32-bits wide. */ + +typedef u32 dma_addr_t; + +#endif /* __ASSEMBLY__ */ + +#endif /* __KERNEL__ */ + +#endif /* _ASM_TYPES_H */ diff --git a/arch/frv/include/asm/uaccess.h b/arch/frv/include/asm/uaccess.h new file mode 100644 index 00000000000..53650c958f4 --- /dev/null +++ b/arch/frv/include/asm/uaccess.h @@ -0,0 +1,321 @@ +/* uaccess.h: userspace accessor functions + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_UACCESS_H +#define _ASM_UACCESS_H + +/* + * User space memory access functions + */ +#include <linux/sched.h> +#include <linux/mm.h> +#include <asm/segment.h> +#include <asm/sections.h> + +#define HAVE_ARCH_UNMAPPED_AREA /* we decide where to put mmaps */ + +#define __ptr(x) ((unsigned long __force *)(x)) + +#define VERIFY_READ 0 +#define VERIFY_WRITE 1 + +#define __addr_ok(addr) ((unsigned long)(addr) < get_addr_limit()) + +/* + * check that a range of addresses falls within the current address limit + */ +static inline int ___range_ok(unsigned long addr, unsigned long size) +{ +#ifdef CONFIG_MMU + int flag = -EFAULT, tmp; + + asm volatile ( + " addcc %3,%2,%1,icc0 \n" /* set C-flag if addr+size>4GB */ + " subcc.p %1,%4,gr0,icc1 \n" /* jump if addr+size>limit */ + " bc icc0,#0,0f \n" + " bhi icc1,#0,0f \n" + " setlos #0,%0 \n" /* mark okay */ + "0: \n" + : "=r"(flag), "=&r"(tmp) + : "r"(addr), "r"(size), "r"(get_addr_limit()), "0"(flag) + ); + + return flag; + +#else + + if (addr < memory_start || + addr > memory_end || + size > memory_end - memory_start || + addr + size > memory_end) + return -EFAULT; + + return 0; +#endif +} + +#define __range_ok(addr,size) ___range_ok((unsigned long) (addr), (unsigned long) (size)) + +#define access_ok(type,addr,size) (__range_ok((void __user *)(addr), (size)) == 0) +#define __access_ok(addr,size) (__range_ok((addr), (size)) == 0) + +/* + * The exception table consists of pairs of addresses: the first is the + * address of an instruction that is allowed to fault, and the second is + * the address at which the program should continue. No registers are + * modified, so it is entirely up to the continuation code to figure out + * what to do. + * + * All the routines below use bits of fixup code that are out of line + * with the main instruction path. This means when everything is well, + * we don't even have to jump over them. Further, they do not intrude + * on our cache or tlb entries. + */ +struct exception_table_entry +{ + unsigned long insn, fixup; +}; + +/* Returns 0 if exception not found and fixup otherwise. */ +extern unsigned long search_exception_table(unsigned long); + + +/* + * These are the main single-value transfer routines. They automatically + * use the right size if we just have the right pointer type. + */ +#define __put_user(x, ptr) \ +({ \ + int __pu_err = 0; \ + \ + typeof(*(ptr)) __pu_val = (x); \ + __chk_user_ptr(ptr); \ + \ + switch (sizeof (*(ptr))) { \ + case 1: \ + __put_user_asm(__pu_err, __pu_val, ptr, "b", "r"); \ + break; \ + case 2: \ + __put_user_asm(__pu_err, __pu_val, ptr, "h", "r"); \ + break; \ + case 4: \ + __put_user_asm(__pu_err, __pu_val, ptr, "", "r"); \ + break; \ + case 8: \ + __put_user_asm(__pu_err, __pu_val, ptr, "d", "e"); \ + break; \ + default: \ + __pu_err = __put_user_bad(); \ + break; \ + } \ + __pu_err; \ +}) + +#define put_user(x, ptr) \ +({ \ + typeof(*(ptr)) __user *_p = (ptr); \ + int _e; \ + \ + _e = __range_ok(_p, sizeof(*_p)); \ + if (_e == 0) \ + _e = __put_user((x), _p); \ + _e; \ +}) + +extern int __put_user_bad(void); + +/* + * Tell gcc we read from memory instead of writing: this is because + * we do not write to any memory gcc knows about, so there are no + * aliasing issues. + */ + +#ifdef CONFIG_MMU + +#define __put_user_asm(err,x,ptr,dsize,constraint) \ +do { \ + asm volatile("1: st"dsize"%I1 %2,%M1 \n" \ + "2: \n" \ + ".subsection 2 \n" \ + "3: setlos %3,%0 \n" \ + " bra 2b \n" \ + ".previous \n" \ + ".section __ex_table,\"a\" \n" \ + " .balign 8 \n" \ + " .long 1b,3b \n" \ + ".previous" \ + : "=r" (err) \ + : "m" (*__ptr(ptr)), constraint (x), "i"(-EFAULT), "0"(err) \ + : "memory"); \ +} while (0) + +#else + +#define __put_user_asm(err,x,ptr,bwl,con) \ +do { \ + asm(" st"bwl"%I0 %1,%M0 \n" \ + " membar \n" \ + : \ + : "m" (*__ptr(ptr)), con (x) \ + : "memory"); \ +} while (0) + +#endif + +/*****************************************************************************/ +/* + * + */ +#define __get_user(x, ptr) \ +({ \ + int __gu_err = 0; \ + __chk_user_ptr(ptr); \ + \ + switch (sizeof(*(ptr))) { \ + case 1: { \ + unsigned char __gu_val; \ + __get_user_asm(__gu_err, __gu_val, ptr, "ub", "=r"); \ + (x) = *(__force __typeof__(*(ptr)) *) &__gu_val; \ + break; \ + } \ + case 2: { \ + unsigned short __gu_val; \ + __get_user_asm(__gu_err, __gu_val, ptr, "uh", "=r"); \ + (x) = *(__force __typeof__(*(ptr)) *) &__gu_val; \ + break; \ + } \ + case 4: { \ + unsigned int __gu_val; \ + __get_user_asm(__gu_err, __gu_val, ptr, "", "=r"); \ + (x) = *(__force __typeof__(*(ptr)) *) &__gu_val; \ + break; \ + } \ + case 8: { \ + unsigned long long __gu_val; \ + __get_user_asm(__gu_err, __gu_val, ptr, "d", "=e"); \ + (x) = *(__force __typeof__(*(ptr)) *) &__gu_val; \ + break; \ + } \ + default: \ + __gu_err = __get_user_bad(); \ + break; \ + } \ + __gu_err; \ +}) + +#define get_user(x, ptr) \ +({ \ + const typeof(*(ptr)) __user *_p = (ptr);\ + int _e; \ + \ + _e = __range_ok(_p, sizeof(*_p)); \ + if (likely(_e == 0)) \ + _e = __get_user((x), _p); \ + else \ + (x) = (typeof(x)) 0; \ + _e; \ +}) + +extern int __get_user_bad(void); + +#ifdef CONFIG_MMU + +#define __get_user_asm(err,x,ptr,dtype,constraint) \ +do { \ + asm("1: ld"dtype"%I2 %M2,%1 \n" \ + "2: \n" \ + ".subsection 2 \n" \ + "3: setlos %3,%0 \n" \ + " setlos #0,%1 \n" \ + " bra 2b \n" \ + ".previous \n" \ + ".section __ex_table,\"a\" \n" \ + " .balign 8 \n" \ + " .long 1b,3b \n" \ + ".previous" \ + : "=r" (err), constraint (x) \ + : "m" (*__ptr(ptr)), "i"(-EFAULT), "0"(err) \ + ); \ +} while(0) + +#else + +#define __get_user_asm(err,x,ptr,bwl,con) \ + asm(" ld"bwl"%I1 %M1,%0 \n" \ + " membar \n" \ + : con(x) \ + : "m" (*__ptr(ptr))) + +#endif + +/*****************************************************************************/ +/* + * + */ +#define ____force(x) (__force void *)(void __user *)(x) +#ifdef CONFIG_MMU +extern long __memset_user(void *dst, unsigned long count); +extern long __memcpy_user(void *dst, const void *src, unsigned long count); + +#define clear_user(dst,count) __memset_user(____force(dst), (count)) +#define __copy_from_user_inatomic(to, from, n) __memcpy_user((to), ____force(from), (n)) +#define __copy_to_user_inatomic(to, from, n) __memcpy_user(____force(to), (from), (n)) + +#else + +#define clear_user(dst,count) (memset(____force(dst), 0, (count)), 0) +#define __copy_from_user_inatomic(to, from, n) (memcpy((to), ____force(from), (n)), 0) +#define __copy_to_user_inatomic(to, from, n) (memcpy(____force(to), (from), (n)), 0) + +#endif + +#define __clear_user clear_user + +static inline unsigned long __must_check +__copy_to_user(void __user *to, const void *from, unsigned long n) +{ + might_sleep(); + return __copy_to_user_inatomic(to, from, n); +} + +static inline unsigned long +__copy_from_user(void *to, const void __user *from, unsigned long n) +{ + might_sleep(); + return __copy_from_user_inatomic(to, from, n); +} + +static inline long copy_from_user(void *to, const void __user *from, unsigned long n) +{ + unsigned long ret = n; + + if (likely(__access_ok(from, n))) + ret = __copy_from_user(to, from, n); + + if (unlikely(ret != 0)) + memset(to + (n - ret), 0, ret); + + return ret; +} + +static inline long copy_to_user(void __user *to, const void *from, unsigned long n) +{ + return likely(__access_ok(to, n)) ? __copy_to_user(to, from, n) : n; +} + +extern long strncpy_from_user(char *dst, const char __user *src, long count); +extern long strnlen_user(const char __user *src, long count); + +#define strlen_user(str) strnlen_user(str, 32767) + +extern unsigned long search_exception_table(unsigned long addr); + +#endif /* _ASM_UACCESS_H */ diff --git a/arch/frv/include/asm/ucontext.h b/arch/frv/include/asm/ucontext.h new file mode 100644 index 00000000000..8d8c0c94800 --- /dev/null +++ b/arch/frv/include/asm/ucontext.h @@ -0,0 +1,12 @@ +#ifndef _ASM_UCONTEXT_H +#define _ASM_UCONTEXT_H + +struct ucontext { + unsigned long uc_flags; + struct ucontext *uc_link; + stack_t uc_stack; + struct sigcontext uc_mcontext; + sigset_t uc_sigmask; /* mask last for extensibility */ +}; + +#endif diff --git a/arch/frv/include/asm/unaligned.h b/arch/frv/include/asm/unaligned.h new file mode 100644 index 00000000000..6c61c05b2e0 --- /dev/null +++ b/arch/frv/include/asm/unaligned.h @@ -0,0 +1,22 @@ +/* unaligned.h: unaligned access handler + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_UNALIGNED_H +#define _ASM_UNALIGNED_H + +#include <linux/unaligned/le_byteshift.h> +#include <linux/unaligned/be_struct.h> +#include <linux/unaligned/generic.h> + +#define get_unaligned __get_unaligned_be +#define put_unaligned __put_unaligned_be + +#endif /* _ASM_UNALIGNED_H */ diff --git a/arch/frv/include/asm/unistd.h b/arch/frv/include/asm/unistd.h new file mode 100644 index 00000000000..edcfaf5f041 --- /dev/null +++ b/arch/frv/include/asm/unistd.h @@ -0,0 +1,382 @@ +#ifndef _ASM_UNISTD_H_ +#define _ASM_UNISTD_H_ + +/* + * This file contains the system call numbers. + */ + +#define __NR_restart_syscall 0 +#define __NR_exit 1 +#define __NR_fork 2 +#define __NR_read 3 +#define __NR_write 4 +#define __NR_open 5 +#define __NR_close 6 +#define __NR_waitpid 7 +#define __NR_creat 8 +#define __NR_link 9 +#define __NR_unlink 10 +#define __NR_execve 11 +#define __NR_chdir 12 +#define __NR_time 13 +#define __NR_mknod 14 +#define __NR_chmod 15 +#define __NR_lchown 16 +#define __NR_break 17 +#define __NR_oldstat 18 +#define __NR_lseek 19 +#define __NR_getpid 20 +#define __NR_mount 21 +#define __NR_umount 22 +#define __NR_setuid 23 +#define __NR_getuid 24 +#define __NR_stime 25 +#define __NR_ptrace 26 +#define __NR_alarm 27 +#define __NR_oldfstat 28 +#define __NR_pause 29 +#define __NR_utime 30 +#define __NR_stty 31 +#define __NR_gtty 32 +#define __NR_access 33 +#define __NR_nice 34 +#define __NR_ftime 35 +#define __NR_sync 36 +#define __NR_kill 37 +#define __NR_rename 38 +#define __NR_mkdir 39 +#define __NR_rmdir 40 +#define __NR_dup 41 +#define __NR_pipe 42 +#define __NR_times 43 +#define __NR_prof 44 +#define __NR_brk 45 +#define __NR_setgid 46 +#define __NR_getgid 47 +#define __NR_signal 48 +#define __NR_geteuid 49 +#define __NR_getegid 50 +#define __NR_acct 51 +#define __NR_umount2 52 +#define __NR_lock 53 +#define __NR_ioctl 54 +#define __NR_fcntl 55 +#define __NR_mpx 56 +#define __NR_setpgid 57 +#define __NR_ulimit 58 +// #define __NR_oldolduname /* 59 */ obsolete +#define __NR_umask 60 +#define __NR_chroot 61 +#define __NR_ustat 62 +#define __NR_dup2 63 +#define __NR_getppid 64 +#define __NR_getpgrp 65 +#define __NR_setsid 66 +#define __NR_sigaction 67 +#define __NR_sgetmask 68 +#define __NR_ssetmask 69 +#define __NR_setreuid 70 +#define __NR_setregid 71 +#define __NR_sigsuspend 72 +#define __NR_sigpending 73 +#define __NR_sethostname 74 +#define __NR_setrlimit 75 +#define __NR_getrlimit 76 /* Back compatible 2Gig limited rlimit */ +#define __NR_getrusage 77 +#define __NR_gettimeofday 78 +#define __NR_settimeofday 79 +#define __NR_getgroups 80 +#define __NR_setgroups 81 +#define __NR_select 82 +#define __NR_symlink 83 +#define __NR_oldlstat 84 +#define __NR_readlink 85 +#define __NR_uselib 86 +#define __NR_swapon 87 +#define __NR_reboot 88 +#define __NR_readdir 89 +// #define __NR_mmap 90 /* obsolete - not implemented */ +#define __NR_munmap 91 +#define __NR_truncate 92 +#define __NR_ftruncate 93 +#define __NR_fchmod 94 +#define __NR_fchown 95 +#define __NR_getpriority 96 +#define __NR_setpriority 97 +// #define __NR_profil /* 98 */ obsolete +#define __NR_statfs 99 +#define __NR_fstatfs 100 +// #define __NR_ioperm /* 101 */ not supported +#define __NR_socketcall 102 +#define __NR_syslog 103 +#define __NR_setitimer 104 +#define __NR_getitimer 105 +#define __NR_stat 106 +#define __NR_lstat 107 +#define __NR_fstat 108 +// #define __NR_olduname /* 109 */ obsolete +// #define __NR_iopl /* 110 */ not supported +#define __NR_vhangup 111 +// #define __NR_idle /* 112 */ Obsolete +// #define __NR_vm86old /* 113 */ not supported +#define __NR_wait4 114 +#define __NR_swapoff 115 +#define __NR_sysinfo 116 +#define __NR_ipc 117 +#define __NR_fsync 118 +#define __NR_sigreturn 119 +#define __NR_clone 120 +#define __NR_setdomainname 121 +#define __NR_uname 122 +// #define __NR_modify_ldt /* 123 */ not supported +#define __NR_cacheflush 123 +#define __NR_adjtimex 124 +#define __NR_mprotect 125 +#define __NR_sigprocmask 126 +#define __NR_create_module 127 +#define __NR_init_module 128 +#define __NR_delete_module 129 +#define __NR_get_kernel_syms 130 +#define __NR_quotactl 131 +#define __NR_getpgid 132 +#define __NR_fchdir 133 +#define __NR_bdflush 134 +#define __NR_sysfs 135 +#define __NR_personality 136 +#define __NR_afs_syscall 137 /* Syscall for Andrew File System */ +#define __NR_setfsuid 138 +#define __NR_setfsgid 139 +#define __NR__llseek 140 +#define __NR_getdents 141 +#define __NR__newselect 142 +#define __NR_flock 143 +#define __NR_msync 144 +#define __NR_readv 145 +#define __NR_writev 146 +#define __NR_getsid 147 +#define __NR_fdatasync 148 +#define __NR__sysctl 149 +#define __NR_mlock 150 +#define __NR_munlock 151 +#define __NR_mlockall 152 +#define __NR_munlockall 153 +#define __NR_sched_setparam 154 +#define __NR_sched_getparam 155 +#define __NR_sched_setscheduler 156 +#define __NR_sched_getscheduler 157 +#define __NR_sched_yield 158 +#define __NR_sched_get_priority_max 159 +#define __NR_sched_get_priority_min 160 +#define __NR_sched_rr_get_interval 161 +#define __NR_nanosleep 162 +#define __NR_mremap 163 +#define __NR_setresuid 164 +#define __NR_getresuid 165 +// #define __NR_vm86 /* 166 */ not supported +#define __NR_query_module 167 +#define __NR_poll 168 +#define __NR_nfsservctl 169 +#define __NR_setresgid 170 +#define __NR_getresgid 171 +#define __NR_prctl 172 +#define __NR_rt_sigreturn 173 +#define __NR_rt_sigaction 174 +#define __NR_rt_sigprocmask 175 +#define __NR_rt_sigpending 176 +#define __NR_rt_sigtimedwait 177 +#define __NR_rt_sigqueueinfo 178 +#define __NR_rt_sigsuspend 179 +#define __NR_pread64 180 +#define __NR_pwrite64 181 +#define __NR_chown 182 +#define __NR_getcwd 183 +#define __NR_capget 184 +#define __NR_capset 185 +#define __NR_sigaltstack 186 +#define __NR_sendfile 187 +#define __NR_getpmsg 188 /* some people actually want streams */ +#define __NR_putpmsg 189 /* some people actually want streams */ +#define __NR_vfork 190 +#define __NR_ugetrlimit 191 /* SuS compliant getrlimit */ +#define __NR_mmap2 192 +#define __NR_truncate64 193 +#define __NR_ftruncate64 194 +#define __NR_stat64 195 +#define __NR_lstat64 196 +#define __NR_fstat64 197 +#define __NR_lchown32 198 +#define __NR_getuid32 199 +#define __NR_getgid32 200 +#define __NR_geteuid32 201 +#define __NR_getegid32 202 +#define __NR_setreuid32 203 +#define __NR_setregid32 204 +#define __NR_getgroups32 205 +#define __NR_setgroups32 206 +#define __NR_fchown32 207 +#define __NR_setresuid32 208 +#define __NR_getresuid32 209 +#define __NR_setresgid32 210 +#define __NR_getresgid32 211 +#define __NR_chown32 212 +#define __NR_setuid32 213 +#define __NR_setgid32 214 +#define __NR_setfsuid32 215 +#define __NR_setfsgid32 216 +#define __NR_pivot_root 217 +#define __NR_mincore 218 +#define __NR_madvise 219 + +#define __NR_getdents64 220 +#define __NR_fcntl64 221 +#define __NR_security 223 /* syscall for security modules */ +#define __NR_gettid 224 +#define __NR_readahead 225 +#define __NR_setxattr 226 +#define __NR_lsetxattr 227 +#define __NR_fsetxattr 228 +#define __NR_getxattr 229 +#define __NR_lgetxattr 230 +#define __NR_fgetxattr 231 +#define __NR_listxattr 232 +#define __NR_llistxattr 233 +#define __NR_flistxattr 234 +#define __NR_removexattr 235 +#define __NR_lremovexattr 236 +#define __NR_fremovexattr 237 +#define __NR_tkill 238 +#define __NR_sendfile64 239 +#define __NR_futex 240 +#define __NR_sched_setaffinity 241 +#define __NR_sched_getaffinity 242 +#define __NR_set_thread_area 243 +#define __NR_get_thread_area 244 +#define __NR_io_setup 245 +#define __NR_io_destroy 246 +#define __NR_io_getevents 247 +#define __NR_io_submit 248 +#define __NR_io_cancel 249 +#define __NR_fadvise64 250 + +#define __NR_exit_group 252 +#define __NR_lookup_dcookie 253 +#define __NR_epoll_create 254 +#define __NR_epoll_ctl 255 +#define __NR_epoll_wait 256 +#define __NR_remap_file_pages 257 +#define __NR_set_tid_address 258 +#define __NR_timer_create 259 +#define __NR_timer_settime (__NR_timer_create+1) +#define __NR_timer_gettime (__NR_timer_create+2) +#define __NR_timer_getoverrun (__NR_timer_create+3) +#define __NR_timer_delete (__NR_timer_create+4) +#define __NR_clock_settime (__NR_timer_create+5) +#define __NR_clock_gettime (__NR_timer_create+6) +#define __NR_clock_getres (__NR_timer_create+7) +#define __NR_clock_nanosleep (__NR_timer_create+8) +#define __NR_statfs64 268 +#define __NR_fstatfs64 269 +#define __NR_tgkill 270 +#define __NR_utimes 271 +#define __NR_fadvise64_64 272 +#define __NR_vserver 273 +#define __NR_mbind 274 +#define __NR_get_mempolicy 275 +#define __NR_set_mempolicy 276 +#define __NR_mq_open 277 +#define __NR_mq_unlink (__NR_mq_open+1) +#define __NR_mq_timedsend (__NR_mq_open+2) +#define __NR_mq_timedreceive (__NR_mq_open+3) +#define __NR_mq_notify (__NR_mq_open+4) +#define __NR_mq_getsetattr (__NR_mq_open+5) +#define __NR_kexec_load 283 +#define __NR_waitid 284 +/* #define __NR_sys_setaltroot 285 */ +#define __NR_add_key 286 +#define __NR_request_key 287 +#define __NR_keyctl 288 +#define __NR_ioprio_set 289 +#define __NR_ioprio_get 290 +#define __NR_inotify_init 291 +#define __NR_inotify_add_watch 292 +#define __NR_inotify_rm_watch 293 +#define __NR_migrate_pages 294 +#define __NR_openat 295 +#define __NR_mkdirat 296 +#define __NR_mknodat 297 +#define __NR_fchownat 298 +#define __NR_futimesat 299 +#define __NR_fstatat64 300 +#define __NR_unlinkat 301 +#define __NR_renameat 302 +#define __NR_linkat 303 +#define __NR_symlinkat 304 +#define __NR_readlinkat 305 +#define __NR_fchmodat 306 +#define __NR_faccessat 307 +#define __NR_pselect6 308 +#define __NR_ppoll 309 +#define __NR_unshare 310 +#define __NR_set_robust_list 311 +#define __NR_get_robust_list 312 +#define __NR_splice 313 +#define __NR_sync_file_range 314 +#define __NR_tee 315 +#define __NR_vmsplice 316 +#define __NR_move_pages 317 +#define __NR_getcpu 318 +#define __NR_epoll_pwait 319 +#define __NR_utimensat 320 +#define __NR_signalfd 321 +#define __NR_timerfd_create 322 +#define __NR_eventfd 323 +#define __NR_fallocate 324 +#define __NR_timerfd_settime 325 +#define __NR_timerfd_gettime 326 +#define __NR_signalfd4 327 +#define __NR_eventfd2 328 +#define __NR_epoll_create1 329 +#define __NR_dup3 330 +#define __NR_pipe2 331 +#define __NR_inotify_init1 332 + +#ifdef __KERNEL__ + +#define NR_syscalls 333 + +#define __ARCH_WANT_IPC_PARSE_VERSION +/* #define __ARCH_WANT_OLD_READDIR */ +#define __ARCH_WANT_OLD_STAT +#define __ARCH_WANT_STAT64 +#define __ARCH_WANT_SYS_ALARM +/* #define __ARCH_WANT_SYS_GETHOSTNAME */ +#define __ARCH_WANT_SYS_PAUSE +/* #define __ARCH_WANT_SYS_SGETMASK */ +/* #define __ARCH_WANT_SYS_SIGNAL */ +#define __ARCH_WANT_SYS_TIME +#define __ARCH_WANT_SYS_UTIME +#define __ARCH_WANT_SYS_WAITPID +#define __ARCH_WANT_SYS_SOCKETCALL +#define __ARCH_WANT_SYS_FADVISE64 +#define __ARCH_WANT_SYS_GETPGRP +#define __ARCH_WANT_SYS_LLSEEK +#define __ARCH_WANT_SYS_NICE +/* #define __ARCH_WANT_SYS_OLD_GETRLIMIT */ +#define __ARCH_WANT_SYS_OLDUMOUNT +/* #define __ARCH_WANT_SYS_SIGPENDING */ +#define __ARCH_WANT_SYS_SIGPROCMASK +#define __ARCH_WANT_SYS_RT_SIGACTION +#define __ARCH_WANT_SYS_RT_SIGSUSPEND + +/* + * "Conditional" syscalls + * + * What we want is __attribute__((weak,alias("sys_ni_syscall"))), + * but it doesn't work on all toolchains, so we just do it by hand + */ +#ifndef cond_syscall +#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall") +#endif + +#endif /* __KERNEL__ */ +#endif /* _ASM_UNISTD_H_ */ diff --git a/arch/frv/include/asm/user.h b/arch/frv/include/asm/user.h new file mode 100644 index 00000000000..82fa8fab64a --- /dev/null +++ b/arch/frv/include/asm/user.h @@ -0,0 +1,80 @@ +/* user.h: FR-V core file format stuff + * + * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _ASM_USER_H +#define _ASM_USER_H + +#include <asm/page.h> +#include <asm/registers.h> + +/* Core file format: The core file is written in such a way that gdb + * can understand it and provide useful information to the user (under + * linux we use the 'trad-core' bfd). There are quite a number of + * obstacles to being able to view the contents of the floating point + * registers, and until these are solved you will not be able to view + * the contents of them. Actually, you can read in the core file and + * look at the contents of the user struct to find out what the + * floating point registers contain. + * + * The actual file contents are as follows: + * UPAGE: + * 1 page consisting of a user struct that tells gdb what is present + * in the file. Directly after this is a copy of the task_struct, + * which is currently not used by gdb, but it may come in useful at + * some point. All of the registers are stored as part of the + * upage. The upage should always be only one page. + * + * DATA: + * The data area is stored. We use current->end_text to + * current->brk to pick up all of the user variables, plus any + * memory that may have been malloced. No attempt is made to + * determine if a page is demand-zero or if a page is totally + * unused, we just cover the entire range. All of the addresses are + * rounded in such a way that an integral number of pages is + * written. + * + * STACK: + * We need the stack information in order to get a meaningful + * backtrace. We need to write the data from (esp) to + * current->start_stack, so we round each of these off in order to + * be able to write an integer number of pages. The minimum core + * file size is 3 pages, or 12288 bytes. + */ + +/* When the kernel dumps core, it starts by dumping the user struct - + * this will be used by gdb to figure out where the data and stack segments + * are within the file, and what virtual addresses to use. + */ +struct user { + /* We start with the registers, to mimic the way that "memory" is returned + * from the ptrace(3,...) function. */ + struct user_context regs; + + /* The rest of this junk is to help gdb figure out what goes where */ + unsigned long u_tsize; /* Text segment size (pages). */ + unsigned long u_dsize; /* Data segment size (pages). */ + unsigned long u_ssize; /* Stack segment size (pages). */ + unsigned long start_code; /* Starting virtual address of text. */ + unsigned long start_stack; /* Starting virtual address of stack area. + * This is actually the bottom of the stack, + * the top of the stack is always found in the + * esp register. */ + long int signal; /* Signal that caused the core dump. */ + + unsigned long magic; /* To uniquely identify a core file */ + char u_comm[32]; /* User command that was responsible */ +}; + +#define NBPG PAGE_SIZE +#define UPAGES 1 +#define HOST_TEXT_START_ADDR (u.start_code) +#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG) + +#endif diff --git a/arch/frv/include/asm/vga.h b/arch/frv/include/asm/vga.h new file mode 100644 index 00000000000..a702c800a22 --- /dev/null +++ b/arch/frv/include/asm/vga.h @@ -0,0 +1,17 @@ +/* vga.h: VGA register stuff + * + * Copyright (C) 2006 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_VGA_H +#define _ASM_VGA_H + + + +#endif /* _ASM_VGA_H */ diff --git a/arch/frv/include/asm/virtconvert.h b/arch/frv/include/asm/virtconvert.h new file mode 100644 index 00000000000..59788fa2a81 --- /dev/null +++ b/arch/frv/include/asm/virtconvert.h @@ -0,0 +1,41 @@ +/* virtconvert.h: virtual/physical/page address convertion + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _ASM_VIRTCONVERT_H +#define _ASM_VIRTCONVERT_H + +/* + * Macros used for converting between virtual and physical mappings. + */ + +#ifdef __KERNEL__ + +#include <asm/setup.h> + +#ifdef CONFIG_MMU + +#define phys_to_virt(vaddr) ((void *) ((unsigned long)(vaddr) + PAGE_OFFSET)) +#define virt_to_phys(vaddr) ((unsigned long) (vaddr) - PAGE_OFFSET) + +#else + +#define phys_to_virt(vaddr) ((void *) (vaddr)) +#define virt_to_phys(vaddr) ((unsigned long) (vaddr)) + +#endif + +#define virt_to_bus virt_to_phys +#define bus_to_virt phys_to_virt + +#define __page_address(page) (PAGE_OFFSET + (((page) - mem_map) << PAGE_SHIFT)) +#define page_to_phys(page) virt_to_phys((void *)__page_address(page)) + +#endif +#endif diff --git a/arch/frv/include/asm/xor.h b/arch/frv/include/asm/xor.h new file mode 100644 index 00000000000..c82eb12a5b1 --- /dev/null +++ b/arch/frv/include/asm/xor.h @@ -0,0 +1 @@ +#include <asm-generic/xor.h> diff --git a/arch/frv/mm/tlb-miss.S b/arch/frv/mm/tlb-miss.S index 07643482cad..7f392bc651a 100644 --- a/arch/frv/mm/tlb-miss.S +++ b/arch/frv/mm/tlb-miss.S @@ -13,7 +13,6 @@ #include <linux/linkage.h> #include <asm/page.h> #include <asm/pgtable.h> -#include <asm/highmem.h> #include <asm/spr-regs.h> .section .text.tlbmiss diff --git a/arch/ia64/include/asm/unistd.h b/arch/ia64/include/asm/unistd.h index 9015979ebe0..10a9eb05f74 100644 --- a/arch/ia64/include/asm/unistd.h +++ b/arch/ia64/include/asm/unistd.h @@ -308,11 +308,13 @@ #define __NR_dup3 1316 #define __NR_pipe2 1317 #define __NR_inotify_init1 1318 +#define __NR_preadv 1319 +#define __NR_pwritev 1320 #ifdef __KERNEL__ -#define NR_syscalls 295 /* length of syscall table */ +#define NR_syscalls 297 /* length of syscall table */ /* * The following defines stop scripts/checksyscalls.sh from complaining about diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S index 8dc69669586..7bebac0e1d4 100644 --- a/arch/ia64/kernel/entry.S +++ b/arch/ia64/kernel/entry.S @@ -1803,6 +1803,8 @@ sys_call_table: data8 sys_dup3 data8 sys_pipe2 data8 sys_inotify_init1 + data8 sys_preadv + data8 sys_pwritev // 1320 .org sys_call_table + 8*NR_syscalls // guard against failures to increase NR_syscalls #endif /* __IA64_ASM_PARAVIRTUALIZED_NATIVE */ diff --git a/arch/ia64/kernel/pci-dma.c b/arch/ia64/kernel/pci-dma.c index e4cb443bb98..eb987386f69 100644 --- a/arch/ia64/kernel/pci-dma.c +++ b/arch/ia64/kernel/pci-dma.c @@ -37,7 +37,7 @@ int force_iommu __read_mostly; to i386. */ struct device fallback_dev = { .init_name = "fallback device", - .coherent_dma_mask = DMA_32BIT_MASK, + .coherent_dma_mask = DMA_BIT_MASK(32), .dma_mask = &fallback_dev.coherent_dma_mask, }; @@ -75,7 +75,7 @@ int iommu_dma_supported(struct device *dev, u64 mask) /* Copied from i386. Doesn't make much sense, because it will only work for pci_alloc_coherent. The caller just has to use GFP_DMA in this case. */ - if (mask < DMA_24BIT_MASK) + if (mask < DMA_BIT_MASK(24)) return 0; /* Tell the device to use SAC when IOMMU force is on. This @@ -90,7 +90,7 @@ int iommu_dma_supported(struct device *dev, u64 mask) SAC for these. Assume all masks <= 40 bits are of this type. Normally this doesn't make any difference, but gives more gentle handling of IOMMU overflow. */ - if (iommu_sac_force && (mask >= DMA_40BIT_MASK)) { + if (iommu_sac_force && (mask >= DMA_BIT_MASK(40))) { dev_info(dev, "Force SAC with mask %lx\n", mask); return 0; } diff --git a/arch/ia64/sn/pci/pci_dma.c b/arch/ia64/sn/pci/pci_dma.c index 8c130e8f00e..d876423e4e7 100644 --- a/arch/ia64/sn/pci/pci_dma.c +++ b/arch/ia64/sn/pci/pci_dma.c @@ -349,7 +349,7 @@ static int sn_dma_mapping_error(struct device *dev, dma_addr_t dma_addr) u64 sn_dma_get_required_mask(struct device *dev) { - return DMA_64BIT_MASK; + return DMA_BIT_MASK(64); } EXPORT_SYMBOL_GPL(sn_dma_get_required_mask); diff --git a/arch/mips/alchemy/common/platform.c b/arch/mips/alchemy/common/platform.c index 5c76c6448e0..117f99f7064 100644 --- a/arch/mips/alchemy/common/platform.c +++ b/arch/mips/alchemy/common/platform.c @@ -80,14 +80,14 @@ static struct resource au1xxx_usb_ohci_resources[] = { }; /* The dmamask must be set for OHCI to work */ -static u64 ohci_dmamask = DMA_32BIT_MASK; +static u64 ohci_dmamask = DMA_BIT_MASK(32); static struct platform_device au1xxx_usb_ohci_device = { .name = "au1xxx-ohci", .id = 0, .dev = { .dma_mask = &ohci_dmamask, - .coherent_dma_mask = DMA_32BIT_MASK, + .coherent_dma_mask = DMA_BIT_MASK(32), }, .num_resources = ARRAY_SIZE(au1xxx_usb_ohci_resources), .resource = au1xxx_usb_ohci_resources, @@ -109,14 +109,14 @@ static struct resource au1100_lcd_resources[] = { } }; -static u64 au1100_lcd_dmamask = DMA_32BIT_MASK; +static u64 au1100_lcd_dmamask = DMA_BIT_MASK(32); static struct platform_device au1100_lcd_device = { .name = "au1100-lcd", .id = 0, .dev = { .dma_mask = &au1100_lcd_dmamask, - .coherent_dma_mask = DMA_32BIT_MASK, + .coherent_dma_mask = DMA_BIT_MASK(32), }, .num_resources = ARRAY_SIZE(au1100_lcd_resources), .resource = au1100_lcd_resources, @@ -138,14 +138,14 @@ static struct resource au1xxx_usb_ehci_resources[] = { }, }; -static u64 ehci_dmamask = DMA_32BIT_MASK; +static u64 ehci_dmamask = DMA_BIT_MASK(32); static struct platform_device au1xxx_usb_ehci_device = { .name = "au1xxx-ehci", .id = 0, .dev = { .dma_mask = &ehci_dmamask, - .coherent_dma_mask = DMA_32BIT_MASK, + .coherent_dma_mask = DMA_BIT_MASK(32), }, .num_resources = ARRAY_SIZE(au1xxx_usb_ehci_resources), .resource = au1xxx_usb_ehci_resources, @@ -165,14 +165,14 @@ static struct resource au1xxx_usb_gdt_resources[] = { }, }; -static u64 udc_dmamask = DMA_32BIT_MASK; +static u64 udc_dmamask = DMA_BIT_MASK(32); static struct platform_device au1xxx_usb_gdt_device = { .name = "au1xxx-udc", .id = 0, .dev = { .dma_mask = &udc_dmamask, - .coherent_dma_mask = DMA_32BIT_MASK, + .coherent_dma_mask = DMA_BIT_MASK(32), }, .num_resources = ARRAY_SIZE(au1xxx_usb_gdt_resources), .resource = au1xxx_usb_gdt_resources, @@ -192,14 +192,14 @@ static struct resource au1xxx_usb_otg_resources[] = { }, }; -static u64 uoc_dmamask = DMA_32BIT_MASK; +static u64 uoc_dmamask = DMA_BIT_MASK(32); static struct platform_device au1xxx_usb_otg_device = { .name = "au1xxx-uoc", .id = 0, .dev = { .dma_mask = &uoc_dmamask, - .coherent_dma_mask = DMA_32BIT_MASK, + .coherent_dma_mask = DMA_BIT_MASK(32), }, .num_resources = ARRAY_SIZE(au1xxx_usb_otg_resources), .resource = au1xxx_usb_otg_resources, @@ -218,20 +218,20 @@ static struct resource au1200_lcd_resources[] = { } }; -static u64 au1200_lcd_dmamask = DMA_32BIT_MASK; +static u64 au1200_lcd_dmamask = DMA_BIT_MASK(32); static struct platform_device au1200_lcd_device = { .name = "au1200-lcd", .id = 0, .dev = { .dma_mask = &au1200_lcd_dmamask, - .coherent_dma_mask = DMA_32BIT_MASK, + .coherent_dma_mask = DMA_BIT_MASK(32), }, .num_resources = ARRAY_SIZE(au1200_lcd_resources), .resource = au1200_lcd_resources, }; -static u64 au1xxx_mmc_dmamask = DMA_32BIT_MASK; +static u64 au1xxx_mmc_dmamask = DMA_BIT_MASK(32); extern struct au1xmmc_platform_data au1xmmc_platdata[2]; @@ -263,7 +263,7 @@ static struct platform_device au1200_mmc0_device = { .id = 0, .dev = { .dma_mask = &au1xxx_mmc_dmamask, - .coherent_dma_mask = DMA_32BIT_MASK, + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &au1xmmc_platdata[0], }, .num_resources = ARRAY_SIZE(au1200_mmc0_resources), @@ -299,7 +299,7 @@ static struct platform_device au1200_mmc1_device = { .id = 1, .dev = { .dma_mask = &au1xxx_mmc_dmamask, - .coherent_dma_mask = DMA_32BIT_MASK, + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &au1xmmc_platdata[1], }, .num_resources = ARRAY_SIZE(au1200_mmc1_resources), diff --git a/arch/mips/alchemy/devboards/pb1200/platform.c b/arch/mips/alchemy/devboards/pb1200/platform.c index 0d68e1985ff..b93dff4a678 100644 --- a/arch/mips/alchemy/devboards/pb1200/platform.c +++ b/arch/mips/alchemy/devboards/pb1200/platform.c @@ -119,14 +119,14 @@ static struct resource ide_resources[] = { } }; -static u64 ide_dmamask = DMA_32BIT_MASK; +static u64 ide_dmamask = DMA_BIT_MASK(32); static struct platform_device ide_device = { .name = "au1200-ide", .id = 0, .dev = { .dma_mask = &ide_dmamask, - .coherent_dma_mask = DMA_32BIT_MASK, + .coherent_dma_mask = DMA_BIT_MASK(32), }, .num_resources = ARRAY_SIZE(ide_resources), .resource = ide_resources diff --git a/arch/mips/include/asm/txx9/ndfmc.h b/arch/mips/include/asm/txx9/ndfmc.h new file mode 100644 index 00000000000..fa67f3df78f --- /dev/null +++ b/arch/mips/include/asm/txx9/ndfmc.h @@ -0,0 +1,30 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * (C) Copyright TOSHIBA CORPORATION 2007 + */ +#ifndef __ASM_TXX9_NDFMC_H +#define __ASM_TXX9_NDFMC_H + +#define NDFMC_PLAT_FLAG_USE_BSPRT 0x01 +#define NDFMC_PLAT_FLAG_NO_RSTR 0x02 +#define NDFMC_PLAT_FLAG_HOLDADD 0x04 +#define NDFMC_PLAT_FLAG_DUMMYWRITE 0x08 + +struct txx9ndfmc_platform_data { + unsigned int shift; + unsigned int gbus_clock; + unsigned int hold; /* hold time in nanosecond */ + unsigned int spw; /* strobe pulse width in nanosecond */ + unsigned int flags; + unsigned char ch_mask; /* available channel bitmask */ + unsigned char wp_mask; /* write-protect bitmask */ + unsigned char wide_mask; /* 16bit-nand bitmask */ +}; + +void txx9_ndfmc_init(unsigned long baseaddr, + const struct txx9ndfmc_platform_data *plat_data); + +#endif /* __ASM_TXX9_NDFMC_H */ diff --git a/arch/mips/include/asm/txx9/rbtx4939.h b/arch/mips/include/asm/txx9/rbtx4939.h index 1acf428c0b4..e517899794a 100644 --- a/arch/mips/include/asm/txx9/rbtx4939.h +++ b/arch/mips/include/asm/txx9/rbtx4939.h @@ -130,4 +130,13 @@ void rbtx4939_prom_init(void); void rbtx4939_irq_setup(void); +struct mtd_partition; +struct map_info; +struct rbtx4939_flash_data { + unsigned int width; + unsigned int nr_parts; + struct mtd_partition *parts; + void (*map_init)(struct map_info *map); +}; + #endif /* __ASM_TXX9_RBTX4939_H */ diff --git a/arch/mips/include/asm/txx9/tx4938.h b/arch/mips/include/asm/txx9/tx4938.h index 0b068154054..cd8bc202175 100644 --- a/arch/mips/include/asm/txx9/tx4938.h +++ b/arch/mips/include/asm/txx9/tx4938.h @@ -291,6 +291,7 @@ int tx4938_pcic1_map_irq(const struct pci_dev *dev, u8 slot); void tx4938_setup_pcierr_irq(void); void tx4938_irq_init(void); void tx4938_mtd_init(int ch); +void tx4938_ndfmc_init(unsigned int hold, unsigned int spw); struct tx4938ide_platform_info { /* diff --git a/arch/mips/include/asm/txx9/tx4939.h b/arch/mips/include/asm/txx9/tx4939.h index 964ef7ede26..f02c50b3abf 100644 --- a/arch/mips/include/asm/txx9/tx4939.h +++ b/arch/mips/include/asm/txx9/tx4939.h @@ -542,5 +542,7 @@ int tx4939_irq(void); void tx4939_mtd_init(int ch); void tx4939_ata_init(void); void tx4939_rtc_init(void); +void tx4939_ndfmc_init(unsigned int hold, unsigned int spw, + unsigned char ch_mask, unsigned char wide_mask); #endif /* __ASM_TXX9_TX4939_H */ diff --git a/arch/mips/nxp/pnx833x/common/platform.c b/arch/mips/nxp/pnx833x/common/platform.c index b1ccbcc18f7..01f8345a206 100644 --- a/arch/mips/nxp/pnx833x/common/platform.c +++ b/arch/mips/nxp/pnx833x/common/platform.c @@ -42,7 +42,7 @@ #include <irq-mapping.h> #include <pnx833x.h> -static u64 uart_dmamask = DMA_32BIT_MASK; +static u64 uart_dmamask = DMA_BIT_MASK(32); static struct resource pnx833x_uart_resources[] = { [0] = { @@ -101,14 +101,14 @@ static struct platform_device pnx833x_uart_device = { .id = -1, .dev = { .dma_mask = &uart_dmamask, - .coherent_dma_mask = DMA_32BIT_MASK, + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = pnx8xxx_ports, }, .num_resources = ARRAY_SIZE(pnx833x_uart_resources), .resource = pnx833x_uart_resources, }; -static u64 ehci_dmamask = DMA_32BIT_MASK; +static u64 ehci_dmamask = DMA_BIT_MASK(32); static struct resource pnx833x_usb_ehci_resources[] = { [0] = { @@ -128,7 +128,7 @@ static struct platform_device pnx833x_usb_ehci_device = { .id = -1, .dev = { .dma_mask = &ehci_dmamask, - .coherent_dma_mask = DMA_32BIT_MASK, + .coherent_dma_mask = DMA_BIT_MASK(32), }, .num_resources = ARRAY_SIZE(pnx833x_usb_ehci_resources), .resource = pnx833x_usb_ehci_resources, @@ -198,7 +198,7 @@ static struct platform_device pnx833x_i2c1_device = { }; #endif -static u64 ethernet_dmamask = DMA_32BIT_MASK; +static u64 ethernet_dmamask = DMA_BIT_MASK(32); static struct resource pnx833x_ethernet_resources[] = { [0] = { @@ -218,7 +218,7 @@ static struct platform_device pnx833x_ethernet_device = { .id = -1, .dev = { .dma_mask = ðernet_dmamask, - .coherent_dma_mask = DMA_32BIT_MASK, + .coherent_dma_mask = DMA_BIT_MASK(32), }, .num_resources = ARRAY_SIZE(pnx833x_ethernet_resources), .resource = pnx833x_ethernet_resources, diff --git a/arch/mips/nxp/pnx8550/common/platform.c b/arch/mips/nxp/pnx8550/common/platform.c index 21d2955359b..5264cc09a27 100644 --- a/arch/mips/nxp/pnx8550/common/platform.c +++ b/arch/mips/nxp/pnx8550/common/platform.c @@ -92,16 +92,16 @@ struct pnx8xxx_port pnx8xxx_ports[] = { }; /* The dmamask must be set for OHCI to work */ -static u64 ohci_dmamask = DMA_32BIT_MASK; +static u64 ohci_dmamask = DMA_BIT_MASK(32); -static u64 uart_dmamask = DMA_32BIT_MASK; +static u64 uart_dmamask = DMA_BIT_MASK(32); static struct platform_device pnx8550_usb_ohci_device = { .name = "pnx8550-ohci", .id = -1, .dev = { .dma_mask = &ohci_dmamask, - .coherent_dma_mask = DMA_32BIT_MASK, + .coherent_dma_mask = DMA_BIT_MASK(32), }, .num_resources = ARRAY_SIZE(pnx8550_usb_ohci_resources), .resource = pnx8550_usb_ohci_resources, @@ -112,7 +112,7 @@ static struct platform_device pnx8550_uart_device = { .id = -1, .dev = { .dma_mask = &uart_dmamask, - .coherent_dma_mask = DMA_32BIT_MASK, + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = pnx8xxx_ports, }, .num_resources = ARRAY_SIZE(pnx8550_uart_resources), diff --git a/arch/mips/pmc-sierra/msp71xx/msp_usb.c b/arch/mips/pmc-sierra/msp71xx/msp_usb.c index f7ca4f58233..0ee01e359dd 100644 --- a/arch/mips/pmc-sierra/msp71xx/msp_usb.c +++ b/arch/mips/pmc-sierra/msp71xx/msp_usb.c @@ -49,14 +49,14 @@ static struct resource msp_usbhost_resources [] = { }, }; -static u64 msp_usbhost_dma_mask = DMA_32BIT_MASK; +static u64 msp_usbhost_dma_mask = DMA_BIT_MASK(32); static struct platform_device msp_usbhost_device = { .name = "pmcmsp-ehci", .id = 0, .dev = { .dma_mask = &msp_usbhost_dma_mask, - .coherent_dma_mask = DMA_32BIT_MASK, + .coherent_dma_mask = DMA_BIT_MASK(32), }, .num_resources = ARRAY_SIZE(msp_usbhost_resources), .resource = msp_usbhost_resources, @@ -77,14 +77,14 @@ static struct resource msp_usbdev_resources [] = { }, }; -static u64 msp_usbdev_dma_mask = DMA_32BIT_MASK; +static u64 msp_usbdev_dma_mask = DMA_BIT_MASK(32); static struct platform_device msp_usbdev_device = { .name = "msp71xx_udc", .id = 0, .dev = { .dma_mask = &msp_usbdev_dma_mask, - .coherent_dma_mask = DMA_32BIT_MASK, + .coherent_dma_mask = DMA_BIT_MASK(32), }, .num_resources = ARRAY_SIZE(msp_usbdev_resources), .resource = msp_usbdev_resources, diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c index a13a08b8c9e..8a266c6a3f5 100644 --- a/arch/mips/txx9/generic/setup.c +++ b/arch/mips/txx9/generic/setup.c @@ -32,6 +32,7 @@ #include <asm/txx9/generic.h> #include <asm/txx9/pci.h> #include <asm/txx9tmr.h> +#include <asm/txx9/ndfmc.h> #ifdef CONFIG_CPU_TX49XX #include <asm/txx9/tx4938.h> #endif @@ -691,6 +692,26 @@ void __init txx9_physmap_flash_init(int no, unsigned long addr, #endif } +void __init txx9_ndfmc_init(unsigned long baseaddr, + const struct txx9ndfmc_platform_data *pdata) +{ +#if defined(CONFIG_MTD_NAND_TXX9NDFMC) || \ + defined(CONFIG_MTD_NAND_TXX9NDFMC_MODULE) + struct resource res = { + .start = baseaddr, + .end = baseaddr + 0x1000 - 1, + .flags = IORESOURCE_MEM, + }; + struct platform_device *pdev = platform_device_alloc("txx9ndfmc", -1); + + if (!pdev || + platform_device_add_resources(pdev, &res, 1) || + platform_device_add_data(pdev, pdata, sizeof(*pdata)) || + platform_device_add(pdev)) + platform_device_put(pdev); +#endif +} + #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) static DEFINE_SPINLOCK(txx9_iocled_lock); diff --git a/arch/mips/txx9/generic/setup_tx4938.c b/arch/mips/txx9/generic/setup_tx4938.c index 25819ff1c35..f0844f891f0 100644 --- a/arch/mips/txx9/generic/setup_tx4938.c +++ b/arch/mips/txx9/generic/setup_tx4938.c @@ -23,6 +23,7 @@ #include <asm/txx9tmr.h> #include <asm/txx9pio.h> #include <asm/txx9/generic.h> +#include <asm/txx9/ndfmc.h> #include <asm/txx9/tx4938.h> static void __init tx4938_wdr_init(void) @@ -382,6 +383,26 @@ void __init tx4938_ata_init(unsigned int irq, unsigned int shift, int tune) platform_device_put(pdev); } +void __init tx4938_ndfmc_init(unsigned int hold, unsigned int spw) +{ + struct txx9ndfmc_platform_data plat_data = { + .shift = 1, + .gbus_clock = txx9_gbus_clock, + .hold = hold, + .spw = spw, + .ch_mask = 1, + }; + unsigned long baseaddr = TX4938_NDFMC_REG & 0xfffffffffULL; + +#ifdef __BIG_ENDIAN + baseaddr += 4; +#endif + if ((__raw_readq(&tx4938_ccfgptr->pcfg) & + (TX4938_PCFG_ATA_SEL|TX4938_PCFG_ISA_SEL|TX4938_PCFG_NDF_SEL)) == + TX4938_PCFG_NDF_SEL) + txx9_ndfmc_init(baseaddr, &plat_data); +} + static void __init tx4938_stop_unused_modules(void) { __u64 pcfg, rst = 0, ckd = 0; diff --git a/arch/mips/txx9/generic/setup_tx4939.c b/arch/mips/txx9/generic/setup_tx4939.c index 55440967b3a..7a25b573e9b 100644 --- a/arch/mips/txx9/generic/setup_tx4939.c +++ b/arch/mips/txx9/generic/setup_tx4939.c @@ -27,6 +27,7 @@ #include <asm/txx9irq.h> #include <asm/txx9tmr.h> #include <asm/txx9/generic.h> +#include <asm/txx9/ndfmc.h> #include <asm/txx9/tx4939.h> static void __init tx4939_wdr_init(void) @@ -457,6 +458,22 @@ void __init tx4939_rtc_init(void) platform_device_register(&rtc_dev); } +void __init tx4939_ndfmc_init(unsigned int hold, unsigned int spw, + unsigned char ch_mask, unsigned char wide_mask) +{ + struct txx9ndfmc_platform_data plat_data = { + .shift = 1, + .gbus_clock = txx9_gbus_clock, + .hold = hold, + .spw = spw, + .flags = NDFMC_PLAT_FLAG_NO_RSTR | NDFMC_PLAT_FLAG_HOLDADD | + NDFMC_PLAT_FLAG_DUMMYWRITE, + .ch_mask = ch_mask, + .wide_mask = wide_mask, + }; + txx9_ndfmc_init(TX4939_NDFMC_REG & 0xfffffffffULL, &plat_data); +} + static void __init tx4939_stop_unused_modules(void) { __u64 pcfg, rst = 0, ckd = 0; diff --git a/arch/mips/txx9/rbtx4938/setup.c b/arch/mips/txx9/rbtx4938/setup.c index 547ff2920bf..65d13df8878 100644 --- a/arch/mips/txx9/rbtx4938/setup.c +++ b/arch/mips/txx9/rbtx4938/setup.c @@ -352,6 +352,8 @@ static void __init rbtx4938_device_init(void) rbtx4938_ne_init(); tx4938_wdt_init(); rbtx4938_mtd_init(); + /* TC58DVM82A1FT: tDH=10ns, tWP=tRP=tREADID=35ns */ + tx4938_ndfmc_init(10, 35); tx4938_ata_init(RBTX4938_IRQ_IOC_ATA, 0, 1); txx9_iocled_init(RBTX4938_LED_ADDR - IO_BASE, -1, 8, 1, "green", NULL); } diff --git a/arch/mips/txx9/rbtx4939/setup.c b/arch/mips/txx9/rbtx4939/setup.c index 656603b85b7..011e1e332f4 100644 --- a/arch/mips/txx9/rbtx4939/setup.c +++ b/arch/mips/txx9/rbtx4939/setup.c @@ -16,6 +16,9 @@ #include <linux/leds.h> #include <linux/interrupt.h> #include <linux/smc91x.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/map.h> #include <asm/reboot.h> #include <asm/txx9/generic.h> #include <asm/txx9/pci.h> @@ -282,6 +285,159 @@ static void rbtx4939_7segled_putc(unsigned int pos, unsigned char val) __rbtx4939_7segled_putc(pos, val); } +#if defined(CONFIG_MTD_RBTX4939) || defined(CONFIG_MTD_RBTX4939_MODULE) +/* special mapping for boot rom */ +static unsigned long rbtx4939_flash_fixup_ofs(unsigned long ofs) +{ + u8 bdipsw = readb(rbtx4939_bdipsw_addr) & 0x0f; + unsigned char shift; + + if (bdipsw & 8) { + /* BOOT Mode: USER ROM1 / USER ROM2 */ + shift = bdipsw & 3; + /* rotate A[23:22] */ + return (ofs & ~0xc00000) | ((((ofs >> 22) + shift) & 3) << 22); + } +#ifdef __BIG_ENDIAN + if (bdipsw == 0) + /* BOOT Mode: Monitor ROM */ + ofs ^= 0x400000; /* swap A[22] */ +#endif + return ofs; +} + +static map_word rbtx4939_flash_read16(struct map_info *map, unsigned long ofs) +{ + map_word r; + + ofs = rbtx4939_flash_fixup_ofs(ofs); + r.x[0] = __raw_readw(map->virt + ofs); + return r; +} + +static void rbtx4939_flash_write16(struct map_info *map, const map_word datum, + unsigned long ofs) +{ + ofs = rbtx4939_flash_fixup_ofs(ofs); + __raw_writew(datum.x[0], map->virt + ofs); + mb(); /* see inline_map_write() in mtd/map.h */ +} + +static void rbtx4939_flash_copy_from(struct map_info *map, void *to, + unsigned long from, ssize_t len) +{ + u8 bdipsw = readb(rbtx4939_bdipsw_addr) & 0x0f; + unsigned char shift; + ssize_t curlen; + + from += (unsigned long)map->virt; + if (bdipsw & 8) { + /* BOOT Mode: USER ROM1 / USER ROM2 */ + shift = bdipsw & 3; + while (len) { + curlen = min_t(unsigned long, len, + 0x400000 - (from & (0x400000 - 1))); + memcpy(to, + (void *)((from & ~0xc00000) | + ((((from >> 22) + shift) & 3) << 22)), + curlen); + len -= curlen; + from += curlen; + to += curlen; + } + return; + } +#ifdef __BIG_ENDIAN + if (bdipsw == 0) { + /* BOOT Mode: Monitor ROM */ + while (len) { + curlen = min_t(unsigned long, len, + 0x400000 - (from & (0x400000 - 1))); + memcpy(to, (void *)(from ^ 0x400000), curlen); + len -= curlen; + from += curlen; + to += curlen; + } + return; + } +#endif + memcpy(to, (void *)from, len); +} + +static void rbtx4939_flash_map_init(struct map_info *map) +{ + map->read = rbtx4939_flash_read16; + map->write = rbtx4939_flash_write16; + map->copy_from = rbtx4939_flash_copy_from; +} + +static void __init rbtx4939_mtd_init(void) +{ + static struct { + struct platform_device dev; + struct resource res; + struct rbtx4939_flash_data data; + } pdevs[4]; + int i; + static char names[4][8]; + static struct mtd_partition parts[4]; + struct rbtx4939_flash_data *boot_pdata = &pdevs[0].data; + u8 bdipsw = readb(rbtx4939_bdipsw_addr) & 0x0f; + + if (bdipsw & 8) { + /* BOOT Mode: USER ROM1 / USER ROM2 */ + boot_pdata->nr_parts = 4; + for (i = 0; i < boot_pdata->nr_parts; i++) { + sprintf(names[i], "img%d", 4 - i); + parts[i].name = names[i]; + parts[i].size = 0x400000; + parts[i].offset = MTDPART_OFS_NXTBLK; + } + } else if (bdipsw == 0) { + /* BOOT Mode: Monitor ROM */ + boot_pdata->nr_parts = 2; + strcpy(names[0], "big"); + strcpy(names[1], "little"); + for (i = 0; i < boot_pdata->nr_parts; i++) { + parts[i].name = names[i]; + parts[i].size = 0x400000; + parts[i].offset = MTDPART_OFS_NXTBLK; + } + } else { + /* BOOT Mode: ROM Emulator */ + boot_pdata->nr_parts = 2; + parts[0].name = "boot"; + parts[0].offset = 0xc00000; + parts[0].size = 0x400000; + parts[1].name = "user"; + parts[1].offset = 0; + parts[1].size = 0xc00000; + } + boot_pdata->parts = parts; + boot_pdata->map_init = rbtx4939_flash_map_init; + + for (i = 0; i < ARRAY_SIZE(pdevs); i++) { + struct resource *r = &pdevs[i].res; + struct platform_device *dev = &pdevs[i].dev; + + r->start = 0x1f000000 - i * 0x1000000; + r->end = r->start + 0x1000000 - 1; + r->flags = IORESOURCE_MEM; + pdevs[i].data.width = 2; + dev->num_resources = 1; + dev->resource = r; + dev->id = i; + dev->name = "rbtx4939-flash"; + dev->dev.platform_data = &pdevs[i].data; + platform_device_register(dev); + } +} +#else +static void __init rbtx4939_mtd_init(void) +{ +} +#endif + static void __init rbtx4939_arch_init(void) { rbtx4939_pci_setup(); @@ -333,6 +489,11 @@ static void __init rbtx4939_device_init(void) platform_device_add_data(pdev, &smc_pdata, sizeof(smc_pdata)) || platform_device_add(pdev)) platform_device_put(pdev); + rbtx4939_mtd_init(); + /* TC58DVM82A1FT: tDH=10ns, tWP=tRP=tREADID=35ns */ + tx4939_ndfmc_init(10, 35, + (1 << 1) | (1 << 2), + (1 << 2)); /* ch1:8bit, ch2:16bit */ rbtx4939_led_setup(); tx4939_wdt_init(); tx4939_ata_init(); diff --git a/arch/mn10300/Kconfig b/arch/mn10300/Kconfig index 41d16822e61..355926730e8 100644 --- a/arch/mn10300/Kconfig +++ b/arch/mn10300/Kconfig @@ -370,5 +370,3 @@ source "security/Kconfig" source "crypto/Kconfig" source "lib/Kconfig" - -source "arch/mn10300/oprofile/Kconfig" diff --git a/arch/mn10300/Makefile b/arch/mn10300/Makefile index 6673a28ec07..dd0c8ff52a6 100644 --- a/arch/mn10300/Makefile +++ b/arch/mn10300/Makefile @@ -94,42 +94,8 @@ ifdef CONFIG_DEBUG_INFO KBUILD_AFLAGS += -Wa,--gdwarf2 endif -################################################################################################### # -# juggle some symlinks in the MN10300 asm include dir +# include the appropriate processor- and unit-specific headers # -# Update machine proc and unit symlinks if something which affects -# them changed. We use .proc / .unit to indicate when they were -# updated last, otherwise make uses the target directory mtime. -# -################################################################################################### - -# processor specific definitions -include/asm-mn10300/.proc: $(wildcard include/config/proc/*.h) include/config/auto.conf - @echo ' SYMLINK include/asm-mn10300/proc -> include/asm-mn10300/proc-$(PROCESSOR)' -ifneq ($(KBUILD_SRC),) - $(Q)mkdir -p include/asm-mn10300 - $(Q)ln -fsn $(srctree)/include/asm-mn10300/proc-$(PROCESSOR) include/asm-mn10300/proc -else - $(Q)ln -fsn proc-$(PROCESSOR) include/asm-mn10300/proc -endif - @touch $@ - -CLEAN_FILES += include/asm-mn10300/proc include/asm-mn10300/.proc - -prepare: include/asm-mn10300/.proc - -# unit specific definitions -include/asm-mn10300/.unit: $(wildcard include/config/unit/*.h) include/config/auto.conf - @echo ' SYMLINK include/asm-mn10300/unit -> include/asm-mn10300/unit-$(UNIT)' -ifneq ($(KBUILD_SRC),) - $(Q)mkdir -p include/asm-mn10300 - $(Q)ln -fsn $(srctree)/include/asm-mn10300/unit-$(UNIT) include/asm-mn10300/unit -else - $(Q)ln -fsn unit-$(UNIT) include/asm-mn10300/unit -endif - @touch $@ - -CLEAN_FILES += include/asm-mn10300/unit include/asm-mn10300/.unit - -prepare: include/asm-mn10300/.unit +KBUILD_CPPFLAGS += -I$(srctree)/arch/mn10300/proc-$(PROCESSOR)/include +KBUILD_CPPFLAGS += -I$(srctree)/arch/mn10300/unit-$(UNIT)/include diff --git a/arch/mn10300/include/asm/Kbuild b/arch/mn10300/include/asm/Kbuild new file mode 100644 index 00000000000..c68e1680da0 --- /dev/null +++ b/arch/mn10300/include/asm/Kbuild @@ -0,0 +1 @@ +include include/asm-generic/Kbuild.asm diff --git a/arch/mn10300/include/asm/atomic.h b/arch/mn10300/include/asm/atomic.h new file mode 100644 index 00000000000..bc064825f9b --- /dev/null +++ b/arch/mn10300/include/asm/atomic.h @@ -0,0 +1,157 @@ +/* MN10300 Atomic counter operations + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_ATOMIC_H +#define _ASM_ATOMIC_H + +#ifdef CONFIG_SMP +#error not SMP safe +#endif + +/* + * Atomic operations that C can't guarantee us. Useful for + * resource counting etc.. + */ + +#define ATOMIC_INIT(i) { (i) } + +#ifdef __KERNEL__ + +/** + * atomic_read - read atomic variable + * @v: pointer of type atomic_t + * + * Atomically reads the value of @v. Note that the guaranteed + * useful range of an atomic_t is only 24 bits. + */ +#define atomic_read(v) ((v)->counter) + +/** + * atomic_set - set atomic variable + * @v: pointer of type atomic_t + * @i: required value + * + * Atomically sets the value of @v to @i. Note that the guaranteed + * useful range of an atomic_t is only 24 bits. + */ +#define atomic_set(v, i) (((v)->counter) = (i)) + +#include <asm/system.h> + +/** + * atomic_add_return - add integer to atomic variable + * @i: integer value to add + * @v: pointer of type atomic_t + * + * Atomically adds @i to @v and returns the result + * Note that the guaranteed useful range of an atomic_t is only 24 bits. + */ +static inline int atomic_add_return(int i, atomic_t *v) +{ + unsigned long flags; + int temp; + + local_irq_save(flags); + temp = v->counter; + temp += i; + v->counter = temp; + local_irq_restore(flags); + + return temp; +} + +/** + * atomic_sub_return - subtract integer from atomic variable + * @i: integer value to subtract + * @v: pointer of type atomic_t + * + * Atomically subtracts @i from @v and returns the result + * Note that the guaranteed useful range of an atomic_t is only 24 bits. + */ +static inline int atomic_sub_return(int i, atomic_t *v) +{ + unsigned long flags; + int temp; + + local_irq_save(flags); + temp = v->counter; + temp -= i; + v->counter = temp; + local_irq_restore(flags); + + return temp; +} + +static inline int atomic_add_negative(int i, atomic_t *v) +{ + return atomic_add_return(i, v) < 0; +} + +static inline void atomic_add(int i, atomic_t *v) +{ + atomic_add_return(i, v); +} + +static inline void atomic_sub(int i, atomic_t *v) +{ + atomic_sub_return(i, v); +} + +static inline void atomic_inc(atomic_t *v) +{ + atomic_add_return(1, v); +} + +static inline void atomic_dec(atomic_t *v) +{ + atomic_sub_return(1, v); +} + +#define atomic_dec_return(v) atomic_sub_return(1, (v)) +#define atomic_inc_return(v) atomic_add_return(1, (v)) + +#define atomic_sub_and_test(i, v) (atomic_sub_return((i), (v)) == 0) +#define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0) +#define atomic_inc_and_test(v) (atomic_add_return(1, (v)) == 0) + +#define atomic_add_unless(v, a, u) \ +({ \ + int c, old; \ + c = atomic_read(v); \ + while (c != (u) && (old = atomic_cmpxchg((v), c, c + (a))) != c) \ + c = old; \ + c != (u); \ +}) + +#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) + +static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr) +{ + unsigned long flags; + + mask = ~mask; + local_irq_save(flags); + *addr &= mask; + local_irq_restore(flags); +} + +#define atomic_xchg(ptr, v) (xchg(&(ptr)->counter, (v))) +#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), (old), (new))) + +/* Atomic operations are already serializing on MN10300??? */ +#define smp_mb__before_atomic_dec() barrier() +#define smp_mb__after_atomic_dec() barrier() +#define smp_mb__before_atomic_inc() barrier() +#define smp_mb__after_atomic_inc() barrier() + +#include <asm-generic/atomic.h> + +#endif /* __KERNEL__ */ +#endif /* _ASM_ATOMIC_H */ diff --git a/arch/mn10300/include/asm/auxvec.h b/arch/mn10300/include/asm/auxvec.h new file mode 100644 index 00000000000..4fdb60b2ae3 --- /dev/null +++ b/arch/mn10300/include/asm/auxvec.h @@ -0,0 +1,4 @@ +#ifndef _ASM_AUXVEC_H +#define _ASM_AUXVEC_H + +#endif diff --git a/arch/mn10300/include/asm/bitops.h b/arch/mn10300/include/asm/bitops.h new file mode 100644 index 00000000000..0b610f482ab --- /dev/null +++ b/arch/mn10300/include/asm/bitops.h @@ -0,0 +1,240 @@ +/* MN10300 bit operations + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + * + * These have to be done with inline assembly: that way the bit-setting + * is guaranteed to be atomic. All bit operations return 0 if the bit + * was cleared before the operation and != 0 if it was not. + * + * bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1). + */ +#ifndef __ASM_BITOPS_H +#define __ASM_BITOPS_H + +#include <asm/cpu-regs.h> + +#define smp_mb__before_clear_bit() barrier() +#define smp_mb__after_clear_bit() barrier() + +/* + * set bit + */ +#define __set_bit(nr, addr) \ +({ \ + volatile unsigned char *_a = (unsigned char *)(addr); \ + const unsigned shift = (nr) & 7; \ + _a += (nr) >> 3; \ + \ + asm volatile("bset %2,(%1) # set_bit reg" \ + : "=m"(*_a) \ + : "a"(_a), "d"(1 << shift), "m"(*_a) \ + : "memory", "cc"); \ +}) + +#define set_bit(nr, addr) __set_bit((nr), (addr)) + +/* + * clear bit + */ +#define ___clear_bit(nr, addr) \ +({ \ + volatile unsigned char *_a = (unsigned char *)(addr); \ + const unsigned shift = (nr) & 7; \ + _a += (nr) >> 3; \ + \ + asm volatile("bclr %2,(%1) # clear_bit reg" \ + : "=m"(*_a) \ + : "a"(_a), "d"(1 << shift), "m"(*_a) \ + : "memory", "cc"); \ +}) + +#define clear_bit(nr, addr) ___clear_bit((nr), (addr)) + + +static inline void __clear_bit(int nr, volatile void *addr) +{ + unsigned int *a = (unsigned int *) addr; + int mask; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + *a &= ~mask; +} + +/* + * test bit + */ +static inline int test_bit(int nr, const volatile void *addr) +{ + return 1UL & (((const unsigned int *) addr)[nr >> 5] >> (nr & 31)); +} + +/* + * change bit + */ +static inline void __change_bit(int nr, volatile void *addr) +{ + int mask; + unsigned int *a = (unsigned int *) addr; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + *a ^= mask; +} + +extern void change_bit(int nr, volatile void *addr); + +/* + * test and set bit + */ +#define __test_and_set_bit(nr,addr) \ +({ \ + volatile unsigned char *_a = (unsigned char *)(addr); \ + const unsigned shift = (nr) & 7; \ + unsigned epsw; \ + _a += (nr) >> 3; \ + \ + asm volatile("bset %3,(%2) # test_set_bit reg\n" \ + "mov epsw,%1" \ + : "=m"(*_a), "=d"(epsw) \ + : "a"(_a), "d"(1 << shift), "m"(*_a) \ + : "memory", "cc"); \ + \ + !(epsw & EPSW_FLAG_Z); \ +}) + +#define test_and_set_bit(nr, addr) __test_and_set_bit((nr), (addr)) + +/* + * test and clear bit + */ +#define __test_and_clear_bit(nr, addr) \ +({ \ + volatile unsigned char *_a = (unsigned char *)(addr); \ + const unsigned shift = (nr) & 7; \ + unsigned epsw; \ + _a += (nr) >> 3; \ + \ + asm volatile("bclr %3,(%2) # test_clear_bit reg\n" \ + "mov epsw,%1" \ + : "=m"(*_a), "=d"(epsw) \ + : "a"(_a), "d"(1 << shift), "m"(*_a) \ + : "memory", "cc"); \ + \ + !(epsw & EPSW_FLAG_Z); \ +}) + +#define test_and_clear_bit(nr, addr) __test_and_clear_bit((nr), (addr)) + +/* + * test and change bit + */ +static inline int __test_and_change_bit(int nr, volatile void *addr) +{ + int mask, retval; + unsigned int *a = (unsigned int *)addr; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + retval = (mask & *a) != 0; + *a ^= mask; + + return retval; +} + +extern int test_and_change_bit(int nr, volatile void *addr); + +#include <asm-generic/bitops/lock.h> + +#ifdef __KERNEL__ + +/** + * __ffs - find first bit set + * @x: the word to search + * + * - return 31..0 to indicate bit 31..0 most least significant bit set + * - if no bits are set in x, the result is undefined + */ +static inline __attribute__((const)) +unsigned long __ffs(unsigned long x) +{ + int bit; + asm("bsch %2,%0" : "=r"(bit) : "0"(0), "r"(x & -x)); + return bit; +} + +/* + * special slimline version of fls() for calculating ilog2_u32() + * - note: no protection against n == 0 + */ +static inline __attribute__((const)) +int __ilog2_u32(u32 n) +{ + int bit; + asm("bsch %2,%0" : "=r"(bit) : "0"(0), "r"(n)); + return bit; +} + +/** + * fls - find last bit set + * @x: the word to search + * + * This is defined the same way as ffs: + * - return 32..1 to indicate bit 31..0 most significant bit set + * - return 0 to indicate no bits set + */ +static inline __attribute__((const)) +int fls(int x) +{ + return (x != 0) ? __ilog2_u32(x) + 1 : 0; +} + +/** + * __fls - find last (most-significant) set bit in a long word + * @word: the word to search + * + * Undefined if no set bit exists, so code should check against 0 first. + */ +static inline unsigned long __fls(unsigned long word) +{ + return __ilog2_u32(word); +} + +/** + * ffs - find first bit set + * @x: the word to search + * + * - return 32..1 to indicate bit 31..0 most least significant bit set + * - return 0 to indicate no bits set + */ +static inline __attribute__((const)) +int ffs(int x) +{ + /* Note: (x & -x) gives us a mask that is the least significant + * (rightmost) 1-bit of the value in x. + */ + return fls(x & -x); +} + +#include <asm-generic/bitops/ffz.h> +#include <asm-generic/bitops/fls64.h> +#include <asm-generic/bitops/find.h> +#include <asm-generic/bitops/sched.h> +#include <asm-generic/bitops/hweight.h> + +#define ext2_set_bit_atomic(lock, nr, addr) \ + test_and_set_bit((nr) ^ 0x18, (addr)) +#define ext2_clear_bit_atomic(lock, nr, addr) \ + test_and_clear_bit((nr) ^ 0x18, (addr)) + +#include <asm-generic/bitops/ext2-non-atomic.h> +#include <asm-generic/bitops/minix-le.h> + +#endif /* __KERNEL__ */ +#endif /* __ASM_BITOPS_H */ diff --git a/arch/mn10300/include/asm/bug.h b/arch/mn10300/include/asm/bug.h new file mode 100644 index 00000000000..4fcf3384e25 --- /dev/null +++ b/arch/mn10300/include/asm/bug.h @@ -0,0 +1,35 @@ +/* MN10300 Kernel bug reporting + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_BUG_H +#define _ASM_BUG_H + +/* + * Tell the user there is some problem. + */ +#define _debug_bug_trap() \ +do { \ + asm volatile( \ + " syscall 15 \n" \ + "0: \n" \ + " .section __bug_table,\"a\" \n" \ + " .long 0b,%0,%1 \n" \ + " .previous \n" \ + : \ + : "i"(__FILE__), "i"(__LINE__) \ + ); \ +} while (0) + +#define BUG() _debug_bug_trap() + +#define HAVE_ARCH_BUG +#include <asm-generic/bug.h> + +#endif /* _ASM_BUG_H */ diff --git a/arch/mn10300/include/asm/bugs.h b/arch/mn10300/include/asm/bugs.h new file mode 100644 index 00000000000..31c8bc592b4 --- /dev/null +++ b/arch/mn10300/include/asm/bugs.h @@ -0,0 +1,20 @@ +/* MN10300 Checks for architecture-dependent bugs + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_BUGS_H +#define _ASM_BUGS_H + +#include <asm/processor.h> + +static inline void __init check_bugs(void) +{ +} + +#endif /* _ASM_BUGS_H */ diff --git a/arch/mn10300/include/asm/busctl-regs.h b/arch/mn10300/include/asm/busctl-regs.h new file mode 100644 index 00000000000..1632aef7340 --- /dev/null +++ b/arch/mn10300/include/asm/busctl-regs.h @@ -0,0 +1,151 @@ +/* AM33v2 on-board bus controller registers + * + * Copyright (C) 2002 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _ASM_BUSCTL_REGS_H +#define _ASM_BUSCTL_REGS_H + +#include <asm/cpu-regs.h> + +#ifdef __KERNEL__ + +/* bus controller registers */ +#define BCCR __SYSREG(0xc0002000, u32) /* bus controller control reg */ +#define BCCR_B0AD 0x00000003 /* block 0 (80000000-83ffffff) bus allocation */ +#define BCCR_B1AD 0x0000000c /* block 1 (84000000-87ffffff) bus allocation */ +#define BCCR_B2AD 0x00000030 /* block 2 (88000000-8bffffff) bus allocation */ +#define BCCR_B3AD 0x000000c0 /* block 3 (8c000000-8fffffff) bus allocation */ +#define BCCR_B4AD 0x00000300 /* block 4 (90000000-93ffffff) bus allocation */ +#define BCCR_B5AD 0x00000c00 /* block 5 (94000000-97ffffff) bus allocation */ +#define BCCR_B6AD 0x00003000 /* block 6 (98000000-9bffffff) bus allocation */ +#define BCCR_B7AD 0x0000c000 /* block 7 (9c000000-9fffffff) bus allocation */ +#define BCCR_BxAD_EXBUS 0x0 /* - direct to system bus controller */ +#define BCCR_BxAD_OPEXBUS 0x1 /* - direct to memory bus controller */ +#define BCCR_BxAD_OCMBUS 0x2 /* - direct to on chip memory */ +#define BCCR_API 0x00070000 /* bus arbitration priority */ +#define BCCR_API_DMACICD 0x00000000 /* - DMA > CI > CD */ +#define BCCR_API_DMACDCI 0x00010000 /* - DMA > CD > CI */ +#define BCCR_API_CICDDMA 0x00020000 /* - CI > CD > DMA */ +#define BCCR_API_CDCIDMA 0x00030000 /* - CD > CI > DMA */ +#define BCCR_API_ROUNDROBIN 0x00040000 /* - round robin */ +#define BCCR_BEPRI_DMACICD 0x00c00000 /* bus error address priority */ +#define BCCR_BEPRI_DMACDCI 0x00000000 /* - DMA > CI > CD */ +#define BCCR_BEPRI_CICDDMA 0x00400000 /* - DMA > CD > CI */ +#define BCCR_BEPRI_CDCIDMA 0x00800000 /* - CI > CD > DMA */ +#define BCCR_BEPRI 0x00c00000 /* - CD > CI > DMA */ +#define BCCR_TMON 0x03000000 /* timeout value settings */ +#define BCCR_TMON_16IOCLK 0x00000000 /* - 16 IOCLK cycles */ +#define BCCR_TMON_256IOCLK 0x01000000 /* - 256 IOCLK cycles */ +#define BCCR_TMON_4096IOCLK 0x02000000 /* - 4096 IOCLK cycles */ +#define BCCR_TMON_65536IOCLK 0x03000000 /* - 65536 IOCLK cycles */ +#define BCCR_TMOE 0x10000000 /* timeout detection enable */ + +#define BCBERR __SYSREG(0xc0002010, u32) /* bus error source reg */ +#define BCBERR_BESB 0x0000001f /* erroneous access destination space */ +#define BCBERR_BESB_MON 0x00000001 /* - monitor space */ +#define BCBERR_BESB_IO 0x00000002 /* - IO bus */ +#define BCBERR_BESB_EX 0x00000004 /* - EX bus */ +#define BCBERR_BESB_OPEX 0x00000008 /* - OpEX bus */ +#define BCBERR_BESB_OCM 0x00000010 /* - on chip memory */ +#define BCBERR_BERW 0x00000100 /* type of access */ +#define BCBERR_BERW_WRITE 0x00000000 /* - write */ +#define BCBERR_BERW_READ 0x00000100 /* - read */ +#define BCBERR_BESD 0x00000200 /* error detector */ +#define BCBERR_BESD_BCU 0x00000000 /* - BCU detected error */ +#define BCBERR_BESD_SLAVE_BUS 0x00000200 /* - slave bus detected error */ +#define BCBERR_BEBST 0x00000400 /* type of access */ +#define BCBERR_BEBST_SINGLE 0x00000000 /* - single */ +#define BCBERR_BEBST_BURST 0x00000400 /* - burst */ +#define BCBERR_BEME 0x00000800 /* multiple bus error flag */ +#define BCBERR_BEMR 0x00007000 /* master bus that caused the error */ +#define BCBERR_BEMR_NOERROR 0x00000000 /* - no error */ +#define BCBERR_BEMR_CI 0x00001000 /* - CPU instruction fetch bus caused error */ +#define BCBERR_BEMR_CD 0x00002000 /* - CPU data bus caused error */ +#define BCBERR_BEMR_DMA 0x00004000 /* - DMA bus caused error */ + +#define BCBEAR __SYSREGC(0xc0002020, u32) /* bus error address reg */ + +/* system bus controller registers */ +#define SBBASE(X) __SYSREG(0xd8c00100 + (X) * 0x10, u32) /* SBC base addr regs */ +#define SBBASE_BE 0x00000001 /* bank enable */ +#define SBBASE_BAM 0x0000fffe /* bank address mask [31:17] */ +#define SBBASE_BBA 0xfffe0000 /* bank base address [31:17] */ + +#define SBCNTRL0(X) __SYSREG(0xd8c00200 + (X) * 0x10, u32) /* SBC bank ctrl0 regs */ +#define SBCNTRL0_WEH 0x00000f00 /* write enable hold */ +#define SBCNTRL0_REH 0x0000f000 /* read enable hold */ +#define SBCNTRL0_RWH 0x000f0000 /* SRW signal hold */ +#define SBCNTRL0_CSH 0x00f00000 /* chip select hold */ +#define SBCNTRL0_DAH 0x0f000000 /* data hold */ +#define SBCNTRL0_ADH 0xf0000000 /* address hold */ + +#define SBCNTRL1(X) __SYSREG(0xd8c00204 + (X) * 0x10, u32) /* SBC bank ctrl1 regs */ +#define SBCNTRL1_WED 0x00000f00 /* write enable delay */ +#define SBCNTRL1_RED 0x0000f000 /* read enable delay */ +#define SBCNTRL1_RWD 0x000f0000 /* SRW signal delay */ +#define SBCNTRL1_ASW 0x00f00000 /* address strobe width */ +#define SBCNTRL1_CSD 0x0f000000 /* chip select delay */ +#define SBCNTRL1_ASD 0xf0000000 /* address strobe delay */ + +#define SBCNTRL2(X) __SYSREG(0xd8c00208 + (X) * 0x10, u32) /* SBC bank ctrl2 regs */ +#define SBCNTRL2_WC 0x000000ff /* wait count */ +#define SBCNTRL2_BWC 0x00000f00 /* burst wait count */ +#define SBCNTRL2_WM 0x01000000 /* wait mode setting */ +#define SBCNTRL2_WM_FIXEDWAIT 0x00000000 /* - fixed wait access */ +#define SBCNTRL2_WM_HANDSHAKE 0x01000000 /* - handshake access */ +#define SBCNTRL2_BM 0x02000000 /* bus synchronisation mode */ +#define SBCNTRL2_BM_SYNC 0x00000000 /* - synchronous mode */ +#define SBCNTRL2_BM_ASYNC 0x02000000 /* - asynchronous mode */ +#define SBCNTRL2_BW 0x04000000 /* bus width */ +#define SBCNTRL2_BW_32 0x00000000 /* - 32 bits */ +#define SBCNTRL2_BW_16 0x04000000 /* - 16 bits */ +#define SBCNTRL2_RWINV 0x08000000 /* R/W signal invert polarity */ +#define SBCNTRL2_RWINV_NORM 0x00000000 /* - normal (read high) */ +#define SBCNTRL2_RWINV_INV 0x08000000 /* - inverted (read low) */ +#define SBCNTRL2_BT 0x70000000 /* bus type setting */ +#define SBCNTRL2_BT_SRAM 0x00000000 /* - SRAM interface */ +#define SBCNTRL2_BT_ADMUX 0x00000000 /* - addr/data multiplexed interface */ +#define SBCNTRL2_BT_BROM 0x00000000 /* - burst ROM interface */ +#define SBCNTRL2_BTSE 0x80000000 /* burst enable */ + +/* memory bus controller */ +#define SDBASE(X) __SYSREG(0xda000008 + (X) * 0x4, u32) /* MBC base addr regs */ +#define SDBASE_CE 0x00000001 /* chip enable */ +#define SDBASE_CBAM 0x0000fff0 /* chip base address mask [31:20] */ +#define SDBASE_CBAM_SHIFT 16 +#define SDBASE_CBA 0xfff00000 /* chip base address [31:20] */ + +#define SDRAMBUS __SYSREG(0xda000000, u32) /* bus mode control reg */ +#define SDRAMBUS_REFEN 0x00000004 /* refresh enable */ +#define SDRAMBUS_TRC 0x00000018 /* refresh command delay time */ +#define SDRAMBUS_BSTPT 0x00000020 /* burst stop command enable */ +#define SDRAMBUS_PONSEQ 0x00000040 /* power on sequence */ +#define SDRAMBUS_SELFREQ 0x00000080 /* self-refresh mode request */ +#define SDRAMBUS_SELFON 0x00000100 /* self-refresh mode on */ +#define SDRAMBUS_SIZE 0x00030000 /* SDRAM size */ +#define SDRAMBUS_SIZE_64Mbit 0x00010000 /* 64Mbit SDRAM (x16) */ +#define SDRAMBUS_SIZE_128Mbit 0x00020000 /* 128Mbit SDRAM (x16) */ +#define SDRAMBUS_SIZE_256Mbit 0x00030000 /* 256Mbit SDRAM (x16) */ +#define SDRAMBUS_TRASWAIT 0x000c0000 /* row address precharge command cycle number */ +#define SDRAMBUS_REFNUM 0x00300000 /* refresh command number */ +#define SDRAMBUS_BSTWAIT 0x00c00000 /* burst stop command cycle */ +#define SDRAMBUS_SETWAIT 0x03000000 /* mode register setting command cycle */ +#define SDRAMBUS_PREWAIT 0x0c000000 /* precharge command cycle */ +#define SDRAMBUS_RASLATE 0x30000000 /* RAS latency */ +#define SDRAMBUS_CASLATE 0xc0000000 /* CAS latency */ + +#define SDREFCNT __SYSREG(0xda000004, u32) /* refresh period reg */ +#define SDREFCNT_PERI 0x00000fff /* refresh period */ + +#define SDSHDW __SYSREG(0xda000010, u32) /* test reg */ + +#endif /* __KERNEL__ */ + +#endif /* _ASM_BUSCTL_REGS_H */ diff --git a/arch/mn10300/include/asm/byteorder.h b/arch/mn10300/include/asm/byteorder.h new file mode 100644 index 00000000000..5dd0bdd9fee --- /dev/null +++ b/arch/mn10300/include/asm/byteorder.h @@ -0,0 +1,6 @@ +#ifndef _ASM_BYTEORDER_H +#define _ASM_BYTEORDER_H + +#include <linux/byteorder/little_endian.h> + +#endif /* _ASM_BYTEORDER_H */ diff --git a/arch/mn10300/include/asm/cache.h b/arch/mn10300/include/asm/cache.h new file mode 100644 index 00000000000..e03cfa2e997 --- /dev/null +++ b/arch/mn10300/include/asm/cache.h @@ -0,0 +1,54 @@ +/* MN10300 cache management registers + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _ASM_CACHE_H +#define _ASM_CACHE_H + +#include <asm/cpu-regs.h> +#include <proc/cache.h> + +#ifndef __ASSEMBLY__ +#define L1_CACHE_DISPARITY (L1_CACHE_NENTRIES * L1_CACHE_BYTES) +#else +#define L1_CACHE_DISPARITY L1_CACHE_NENTRIES * L1_CACHE_BYTES +#endif + +/* data cache purge registers + * - read from the register to unconditionally purge that cache line + * - write address & 0xffffff00 to conditionally purge that cache line + * - clear LSB to request invalidation as well + */ +#define DCACHE_PURGE(WAY, ENTRY) \ + __SYSREG(0xc8400000 + (WAY) * L1_CACHE_WAYDISP + \ + (ENTRY) * L1_CACHE_BYTES, u32) + +#define DCACHE_PURGE_WAY0(ENTRY) \ + __SYSREG(0xc8400000 + 0 * L1_CACHE_WAYDISP + (ENTRY) * L1_CACHE_BYTES, u32) +#define DCACHE_PURGE_WAY1(ENTRY) \ + __SYSREG(0xc8400000 + 1 * L1_CACHE_WAYDISP + (ENTRY) * L1_CACHE_BYTES, u32) +#define DCACHE_PURGE_WAY2(ENTRY) \ + __SYSREG(0xc8400000 + 2 * L1_CACHE_WAYDISP + (ENTRY) * L1_CACHE_BYTES, u32) +#define DCACHE_PURGE_WAY3(ENTRY) \ + __SYSREG(0xc8400000 + 3 * L1_CACHE_WAYDISP + (ENTRY) * L1_CACHE_BYTES, u32) + +/* instruction cache access registers */ +#define ICACHE_DATA(WAY, ENTRY, OFF) \ + __SYSREG(0xc8000000 + (WAY) * L1_CACHE_WAYDISP + (ENTRY) * 0x10 + (OFF) * 4, u32) +#define ICACHE_TAG(WAY, ENTRY) \ + __SYSREG(0xc8100000 + (WAY) * L1_CACHE_WAYDISP + (ENTRY) * 0x10, u32) + +/* instruction cache access registers */ +#define DCACHE_DATA(WAY, ENTRY, OFF) \ + __SYSREG(0xc8200000 + (WAY) * L1_CACHE_WAYDISP + (ENTRY) * 0x10 + (OFF) * 4, u32) +#define DCACHE_TAG(WAY, ENTRY) \ + __SYSREG(0xc8300000 + (WAY) * L1_CACHE_WAYDISP + (ENTRY) * 0x10, u32) + +#endif /* _ASM_CACHE_H */ diff --git a/arch/mn10300/include/asm/cacheflush.h b/arch/mn10300/include/asm/cacheflush.h new file mode 100644 index 00000000000..2db746a251f --- /dev/null +++ b/arch/mn10300/include/asm/cacheflush.h @@ -0,0 +1,116 @@ +/* MN10300 Cache flushing + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_CACHEFLUSH_H +#define _ASM_CACHEFLUSH_H + +#ifndef __ASSEMBLY__ + +/* Keep includes the same across arches. */ +#include <linux/mm.h> + +/* + * virtually-indexed cache managment (our cache is physically indexed) + */ +#define flush_cache_all() do {} while (0) +#define flush_cache_mm(mm) do {} while (0) +#define flush_cache_dup_mm(mm) do {} while (0) +#define flush_cache_range(mm, start, end) do {} while (0) +#define flush_cache_page(vma, vmaddr, pfn) do {} while (0) +#define flush_cache_vmap(start, end) do {} while (0) +#define flush_cache_vunmap(start, end) do {} while (0) +#define flush_dcache_page(page) do {} while (0) +#define flush_dcache_mmap_lock(mapping) do {} while (0) +#define flush_dcache_mmap_unlock(mapping) do {} while (0) + +/* + * physically-indexed cache managment + */ +#ifndef CONFIG_MN10300_CACHE_DISABLED + +extern void flush_icache_range(unsigned long start, unsigned long end); +extern void flush_icache_page(struct vm_area_struct *vma, struct page *pg); + +#else + +#define flush_icache_range(start, end) do {} while (0) +#define flush_icache_page(vma, pg) do {} while (0) + +#endif + +#define flush_icache_user_range(vma, pg, adr, len) \ + flush_icache_range(adr, adr + len) + +#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ + do { \ + memcpy(dst, src, len); \ + flush_icache_page(vma, page); \ + } while (0) + +#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ + memcpy(dst, src, len) + +/* + * primitive routines + */ +#ifndef CONFIG_MN10300_CACHE_DISABLED +extern void mn10300_icache_inv(void); +extern void mn10300_dcache_inv(void); +extern void mn10300_dcache_inv_page(unsigned start); +extern void mn10300_dcache_inv_range(unsigned start, unsigned end); +extern void mn10300_dcache_inv_range2(unsigned start, unsigned size); +#ifdef CONFIG_MN10300_CACHE_WBACK +extern void mn10300_dcache_flush(void); +extern void mn10300_dcache_flush_page(unsigned start); +extern void mn10300_dcache_flush_range(unsigned start, unsigned end); +extern void mn10300_dcache_flush_range2(unsigned start, unsigned size); +extern void mn10300_dcache_flush_inv(void); +extern void mn10300_dcache_flush_inv_page(unsigned start); +extern void mn10300_dcache_flush_inv_range(unsigned start, unsigned end); +extern void mn10300_dcache_flush_inv_range2(unsigned start, unsigned size); +#else +#define mn10300_dcache_flush() do {} while (0) +#define mn10300_dcache_flush_page(start) do {} while (0) +#define mn10300_dcache_flush_range(start, end) do {} while (0) +#define mn10300_dcache_flush_range2(start, size) do {} while (0) +#define mn10300_dcache_flush_inv() mn10300_dcache_inv() +#define mn10300_dcache_flush_inv_page(start) \ + mn10300_dcache_inv_page((start)) +#define mn10300_dcache_flush_inv_range(start, end) \ + mn10300_dcache_inv_range((start), (end)) +#define mn10300_dcache_flush_inv_range2(start, size) \ + mn10300_dcache_inv_range2((start), (size)) +#endif /* CONFIG_MN10300_CACHE_WBACK */ +#else +#define mn10300_icache_inv() do {} while (0) +#define mn10300_dcache_inv() do {} while (0) +#define mn10300_dcache_inv_page(start) do {} while (0) +#define mn10300_dcache_inv_range(start, end) do {} while (0) +#define mn10300_dcache_inv_range2(start, size) do {} while (0) +#define mn10300_dcache_flush() do {} while (0) +#define mn10300_dcache_flush_inv_page(start) do {} while (0) +#define mn10300_dcache_flush_inv() do {} while (0) +#define mn10300_dcache_flush_inv_range(start, end) do {} while (0) +#define mn10300_dcache_flush_inv_range2(start, size) do {} while (0) +#define mn10300_dcache_flush_page(start) do {} while (0) +#define mn10300_dcache_flush_range(start, end) do {} while (0) +#define mn10300_dcache_flush_range2(start, size) do {} while (0) +#endif /* CONFIG_MN10300_CACHE_DISABLED */ + +/* + * internal debugging function + */ +#ifdef CONFIG_DEBUG_PAGEALLOC +extern void kernel_map_pages(struct page *page, int numpages, int enable); +#endif + +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_CACHEFLUSH_H */ diff --git a/arch/mn10300/include/asm/checksum.h b/arch/mn10300/include/asm/checksum.h new file mode 100644 index 00000000000..9fb2a8d8826 --- /dev/null +++ b/arch/mn10300/include/asm/checksum.h @@ -0,0 +1,86 @@ +/* MN10300 Optimised checksumming code + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_CHECKSUM_H +#define _ASM_CHECKSUM_H + +extern __wsum csum_partial(const void *buff, int len, __wsum sum); +extern __wsum csum_partial_copy_nocheck(const void *src, void *dst, + int len, __wsum sum); +extern __wsum csum_partial_copy_from_user(const void *src, void *dst, + int len, __wsum sum, + int *err_ptr); +extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl); +extern __wsum csum_partial(const void *buff, int len, __wsum sum); +extern __sum16 ip_compute_csum(const void *buff, int len); + +#define csum_partial_copy_fromuser csum_partial_copy +extern __wsum csum_partial_copy(const void *src, void *dst, int len, + __wsum sum); + +static inline __sum16 csum_fold(__wsum sum) +{ + asm( + " add %1,%0 \n" + " addc 0xffff,%0 \n" + : "=r" (sum) + : "r" (sum << 16), "0" (sum & 0xffff0000) + : "cc" + ); + return (~sum) >> 16; +} + +static inline __wsum csum_tcpudp_nofold(unsigned long saddr, + unsigned long daddr, + unsigned short len, + unsigned short proto, + __wsum sum) +{ + __wsum tmp; + + tmp = (__wsum) ntohs(len) << 16; + tmp += (__wsum) proto << 8; + + asm( + " add %1,%0 \n" + " addc %2,%0 \n" + " addc %3,%0 \n" + " addc 0,%0 \n" + : "=r" (sum) + : "r" (daddr), "r"(saddr), "r"(tmp), "0"(sum) + : "cc" + ); + return sum; +} + +/* + * computes the checksum of the TCP/UDP pseudo-header + * returns a 16-bit checksum, already complemented + */ +static inline __sum16 csum_tcpudp_magic(unsigned long saddr, + unsigned long daddr, + unsigned short len, + unsigned short proto, + __wsum sum) +{ + return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum)); +} + +#undef _HAVE_ARCH_IPV6_CSUM + +/* + * Copy and checksum to user + */ +#define HAVE_CSUM_COPY_USER +extern __wsum csum_and_copy_to_user(const void *src, void *dst, int len, + __wsum sum, int *err_ptr); + + +#endif /* _ASM_CHECKSUM_H */ diff --git a/arch/mn10300/include/asm/cpu-regs.h b/arch/mn10300/include/asm/cpu-regs.h new file mode 100644 index 00000000000..757e9b5388e --- /dev/null +++ b/arch/mn10300/include/asm/cpu-regs.h @@ -0,0 +1,290 @@ +/* MN10300 Core system registers + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_CPU_REGS_H +#define _ASM_CPU_REGS_H + +#ifndef __ASSEMBLY__ +#include <linux/types.h> +#endif + +#ifdef CONFIG_MN10300_CPU_AM33V2 +/* we tell the compiler to pretend to be AM33 so that it doesn't try and use + * the FP regs, but tell the assembler that we're actually allowed AM33v2 + * instructions */ +#ifndef __ASSEMBLY__ +asm(" .am33_2\n"); +#else +.am33_2 +#endif +#endif + +#ifdef __KERNEL__ + +#ifndef __ASSEMBLY__ +#define __SYSREG(ADDR, TYPE) (*(volatile TYPE *)(ADDR)) +#define __SYSREGC(ADDR, TYPE) (*(const volatile TYPE *)(ADDR)) +#else +#define __SYSREG(ADDR, TYPE) ADDR +#define __SYSREGC(ADDR, TYPE) ADDR +#endif + +/* CPU registers */ +#define EPSW_FLAG_Z 0x00000001 /* zero flag */ +#define EPSW_FLAG_N 0x00000002 /* negative flag */ +#define EPSW_FLAG_C 0x00000004 /* carry flag */ +#define EPSW_FLAG_V 0x00000008 /* overflow flag */ +#define EPSW_IM 0x00000700 /* interrupt mode */ +#define EPSW_IM_0 0x00000000 /* interrupt mode 0 */ +#define EPSW_IM_1 0x00000100 /* interrupt mode 1 */ +#define EPSW_IM_2 0x00000200 /* interrupt mode 2 */ +#define EPSW_IM_3 0x00000300 /* interrupt mode 3 */ +#define EPSW_IM_4 0x00000400 /* interrupt mode 4 */ +#define EPSW_IM_5 0x00000500 /* interrupt mode 5 */ +#define EPSW_IM_6 0x00000600 /* interrupt mode 6 */ +#define EPSW_IM_7 0x00000700 /* interrupt mode 7 */ +#define EPSW_IE 0x00000800 /* interrupt enable */ +#define EPSW_S 0x00003000 /* software auxilliary bits */ +#define EPSW_T 0x00008000 /* trace enable */ +#define EPSW_nSL 0x00010000 /* not supervisor level */ +#define EPSW_NMID 0x00020000 /* nonmaskable interrupt disable */ +#define EPSW_nAR 0x00040000 /* register bank control */ +#define EPSW_ML 0x00080000 /* monitor level */ +#define EPSW_FE 0x00100000 /* FPU enable */ + +/* FPU registers */ +#define FPCR_EF_I 0x00000001 /* inexact result FPU exception flag */ +#define FPCR_EF_U 0x00000002 /* underflow FPU exception flag */ +#define FPCR_EF_O 0x00000004 /* overflow FPU exception flag */ +#define FPCR_EF_Z 0x00000008 /* zero divide FPU exception flag */ +#define FPCR_EF_V 0x00000010 /* invalid operand FPU exception flag */ +#define FPCR_EE_I 0x00000020 /* inexact result FPU exception enable */ +#define FPCR_EE_U 0x00000040 /* underflow FPU exception enable */ +#define FPCR_EE_O 0x00000080 /* overflow FPU exception enable */ +#define FPCR_EE_Z 0x00000100 /* zero divide FPU exception enable */ +#define FPCR_EE_V 0x00000200 /* invalid operand FPU exception enable */ +#define FPCR_EC_I 0x00000400 /* inexact result FPU exception cause */ +#define FPCR_EC_U 0x00000800 /* underflow FPU exception cause */ +#define FPCR_EC_O 0x00001000 /* overflow FPU exception cause */ +#define FPCR_EC_Z 0x00002000 /* zero divide FPU exception cause */ +#define FPCR_EC_V 0x00004000 /* invalid operand FPU exception cause */ +#define FPCR_RM 0x00030000 /* rounding mode */ +#define FPCR_RM_NEAREST 0x00000000 /* - round to nearest value */ +#define FPCR_FCC_U 0x00040000 /* FPU unordered condition code */ +#define FPCR_FCC_E 0x00080000 /* FPU equal condition code */ +#define FPCR_FCC_G 0x00100000 /* FPU greater than condition code */ +#define FPCR_FCC_L 0x00200000 /* FPU less than condition code */ +#define FPCR_INIT 0x00000000 /* no exceptions, rounding to nearest */ + +/* CPU control registers */ +#define CPUP __SYSREG(0xc0000020, u16) /* CPU pipeline register */ +#define CPUP_DWBD 0x0020 /* write buffer disable flag */ +#define CPUP_IPFD 0x0040 /* instruction prefetch disable flag */ +#define CPUP_EXM 0x0080 /* exception operation mode */ +#define CPUP_EXM_AM33V1 0x0000 /* - AM33 v1 exception mode */ +#define CPUP_EXM_AM33V2 0x0080 /* - AM33 v2 exception mode */ + +#define CPUM __SYSREG(0xc0000040, u16) /* CPU mode register */ +#define CPUM_SLEEP 0x0004 /* set to enter sleep state */ +#define CPUM_HALT 0x0008 /* set to enter halt state */ +#define CPUM_STOP 0x0010 /* set to enter stop state */ + +#define CPUREV __SYSREGC(0xc0000050, u32) /* CPU revision register */ +#define CPUREV_TYPE 0x0000000f /* CPU type */ +#define CPUREV_TYPE_S 0 +#define CPUREV_TYPE_AM33V1 0x00000000 /* - AM33 V1 core, AM33/1.00 arch */ +#define CPUREV_TYPE_AM33V2 0x00000001 /* - AM33 V2 core, AM33/2.00 arch */ +#define CPUREV_TYPE_AM34V1 0x00000002 /* - AM34 V1 core, AM33/2.00 arch */ +#define CPUREV_REVISION 0x000000f0 /* CPU revision */ +#define CPUREV_REVISION_S 4 +#define CPUREV_ICWAY 0x00000f00 /* number of instruction cache ways */ +#define CPUREV_ICWAY_S 8 +#define CPUREV_ICSIZE 0x0000f000 /* instruction cache way size */ +#define CPUREV_ICSIZE_S 12 +#define CPUREV_DCWAY 0x000f0000 /* number of data cache ways */ +#define CPUREV_DCWAY_S 16 +#define CPUREV_DCSIZE 0x00f00000 /* data cache way size */ +#define CPUREV_DCSIZE_S 20 +#define CPUREV_FPUTYPE 0x0f000000 /* FPU core type */ +#define CPUREV_FPUTYPE_NONE 0x00000000 /* - no FPU core implemented */ +#define CPUREV_OCDCTG 0xf0000000 /* on-chip debug function category */ + +#define DCR __SYSREG(0xc0000030, u16) /* Debug control register */ + +/* interrupt/exception control registers */ +#define IVAR0 __SYSREG(0xc0000000, u16) /* interrupt vector 0 */ +#define IVAR1 __SYSREG(0xc0000004, u16) /* interrupt vector 1 */ +#define IVAR2 __SYSREG(0xc0000008, u16) /* interrupt vector 2 */ +#define IVAR3 __SYSREG(0xc000000c, u16) /* interrupt vector 3 */ +#define IVAR4 __SYSREG(0xc0000010, u16) /* interrupt vector 4 */ +#define IVAR5 __SYSREG(0xc0000014, u16) /* interrupt vector 5 */ +#define IVAR6 __SYSREG(0xc0000018, u16) /* interrupt vector 6 */ + +#define TBR __SYSREG(0xc0000024, u32) /* Trap table base */ +#define TBR_TB 0xff000000 /* table base address bits 31-24 */ +#define TBR_INT_CODE 0x00ffffff /* interrupt code */ + +#define DEAR __SYSREG(0xc0000038, u32) /* Data access exception address */ + +#define sISR __SYSREG(0xc0000044, u32) /* Supervisor interrupt status */ +#define sISR_IRQICE 0x00000001 /* ICE interrupt */ +#define sISR_ISTEP 0x00000002 /* single step interrupt */ +#define sISR_MISSA 0x00000004 /* memory access address misalignment fault */ +#define sISR_UNIMP 0x00000008 /* unimplemented instruction execution fault */ +#define sISR_PIEXE 0x00000010 /* program interrupt */ +#define sISR_MEMERR 0x00000020 /* illegal memory access fault */ +#define sISR_IBREAK 0x00000040 /* instraction break interrupt */ +#define sISR_DBSRL 0x00000080 /* debug serial interrupt */ +#define sISR_PERIDB 0x00000100 /* peripheral debug interrupt */ +#define sISR_EXUNIMP 0x00000200 /* unimplemented ex-instruction execution fault */ +#define sISR_OBREAK 0x00000400 /* operand break interrupt */ +#define sISR_PRIV 0x00000800 /* privileged instruction execution fault */ +#define sISR_BUSERR 0x00001000 /* bus error fault */ +#define sISR_DBLFT 0x00002000 /* double fault */ +#define sISR_DBG 0x00008000 /* debug reserved interrupt */ +#define sISR_ITMISS 0x00010000 /* instruction TLB miss */ +#define sISR_DTMISS 0x00020000 /* data TLB miss */ +#define sISR_ITEX 0x00040000 /* instruction TLB access exception */ +#define sISR_DTEX 0x00080000 /* data TLB access exception */ +#define sISR_ILGIA 0x00100000 /* illegal instruction access exception */ +#define sISR_ILGDA 0x00200000 /* illegal data access exception */ +#define sISR_IOIA 0x00400000 /* internal I/O space instruction access excep */ +#define sISR_PRIVA 0x00800000 /* privileged space instruction access excep */ +#define sISR_PRIDA 0x01000000 /* privileged space data access excep */ +#define sISR_DISA 0x02000000 /* data space instruction access excep */ +#define sISR_SYSC 0x04000000 /* system call instruction excep */ +#define sISR_FPUD 0x08000000 /* FPU disabled excep */ +#define sISR_FPUUI 0x10000000 /* FPU unimplemented instruction excep */ +#define sISR_FPUOP 0x20000000 /* FPU operation excep */ +#define sISR_NE 0x80000000 /* multiple synchronous exceptions excep */ + +/* cache control registers */ +#define CHCTR __SYSREG(0xc0000070, u16) /* cache control */ +#define CHCTR_ICEN 0x0001 /* instruction cache enable */ +#define CHCTR_DCEN 0x0002 /* data cache enable */ +#define CHCTR_ICBUSY 0x0004 /* instruction cache busy */ +#define CHCTR_DCBUSY 0x0008 /* data cache busy */ +#define CHCTR_ICINV 0x0010 /* instruction cache invalidate */ +#define CHCTR_DCINV 0x0020 /* data cache invalidate */ +#define CHCTR_DCWTMD 0x0040 /* data cache writing mode */ +#define CHCTR_DCWTMD_WRBACK 0x0000 /* - write back mode */ +#define CHCTR_DCWTMD_WRTHROUGH 0x0040 /* - write through mode */ +#define CHCTR_DCALMD 0x0080 /* data cache allocation mode */ +#define CHCTR_ICWMD 0x0f00 /* instruction cache way mode */ +#define CHCTR_DCWMD 0xf000 /* data cache way mode */ + +/* MMU control registers */ +#define MMUCTR __SYSREG(0xc0000090, u32) /* MMU control register */ +#define MMUCTR_IRP 0x0000003f /* instruction TLB replace pointer */ +#define MMUCTR_ITE 0x00000040 /* instruction TLB enable */ +#define MMUCTR_IIV 0x00000080 /* instruction TLB invalidate */ +#define MMUCTR_ITL 0x00000700 /* instruction TLB lock pointer */ +#define MMUCTR_ITL_NOLOCK 0x00000000 /* - no lock */ +#define MMUCTR_ITL_LOCK0 0x00000100 /* - entry 0 locked */ +#define MMUCTR_ITL_LOCK0_1 0x00000200 /* - entry 0-1 locked */ +#define MMUCTR_ITL_LOCK0_3 0x00000300 /* - entry 0-3 locked */ +#define MMUCTR_ITL_LOCK0_7 0x00000400 /* - entry 0-7 locked */ +#define MMUCTR_ITL_LOCK0_15 0x00000500 /* - entry 0-15 locked */ +#define MMUCTR_CE 0x00008000 /* cacheable bit enable */ +#define MMUCTR_DRP 0x003f0000 /* data TLB replace pointer */ +#define MMUCTR_DTE 0x00400000 /* data TLB enable */ +#define MMUCTR_DIV 0x00800000 /* data TLB invalidate */ +#define MMUCTR_DTL 0x07000000 /* data TLB lock pointer */ +#define MMUCTR_DTL_NOLOCK 0x00000000 /* - no lock */ +#define MMUCTR_DTL_LOCK0 0x01000000 /* - entry 0 locked */ +#define MMUCTR_DTL_LOCK0_1 0x02000000 /* - entry 0-1 locked */ +#define MMUCTR_DTL_LOCK0_3 0x03000000 /* - entry 0-3 locked */ +#define MMUCTR_DTL_LOCK0_7 0x04000000 /* - entry 0-7 locked */ +#define MMUCTR_DTL_LOCK0_15 0x05000000 /* - entry 0-15 locked */ + +#define PIDR __SYSREG(0xc0000094, u16) /* PID register */ +#define PIDR_PID 0x00ff /* process identifier */ + +#define PTBR __SYSREG(0xc0000098, unsigned long) /* Page table base register */ + +#define IPTEL __SYSREG(0xc00000a0, u32) /* instruction TLB entry */ +#define DPTEL __SYSREG(0xc00000b0, u32) /* data TLB entry */ +#define xPTEL_V 0x00000001 /* TLB entry valid */ +#define xPTEL_UNUSED1 0x00000002 /* unused bit */ +#define xPTEL_UNUSED2 0x00000004 /* unused bit */ +#define xPTEL_C 0x00000008 /* cached if set */ +#define xPTEL_PV 0x00000010 /* page valid */ +#define xPTEL_D 0x00000020 /* dirty */ +#define xPTEL_PR 0x000001c0 /* page protection */ +#define xPTEL_PR_ROK 0x00000000 /* - R/O kernel */ +#define xPTEL_PR_RWK 0x00000100 /* - R/W kernel */ +#define xPTEL_PR_ROK_ROU 0x00000080 /* - R/O kernel and R/O user */ +#define xPTEL_PR_RWK_ROU 0x00000180 /* - R/W kernel and R/O user */ +#define xPTEL_PR_RWK_RWU 0x000001c0 /* - R/W kernel and R/W user */ +#define xPTEL_G 0x00000200 /* global (use PID if 0) */ +#define xPTEL_PS 0x00000c00 /* page size */ +#define xPTEL_PS_4Kb 0x00000000 /* - 4Kb page */ +#define xPTEL_PS_128Kb 0x00000400 /* - 128Kb page */ +#define xPTEL_PS_1Kb 0x00000800 /* - 1Kb page */ +#define xPTEL_PS_4Mb 0x00000c00 /* - 4Mb page */ +#define xPTEL_PPN 0xfffff006 /* physical page number */ + +#define xPTEL_V_BIT 0 /* bit numbers corresponding to above masks */ +#define xPTEL_UNUSED1_BIT 1 +#define xPTEL_UNUSED2_BIT 2 +#define xPTEL_C_BIT 3 +#define xPTEL_PV_BIT 4 +#define xPTEL_D_BIT 5 +#define xPTEL_G_BIT 9 + +#define IPTEU __SYSREG(0xc00000a4, u32) /* instruction TLB virtual addr */ +#define DPTEU __SYSREG(0xc00000b4, u32) /* data TLB virtual addr */ +#define xPTEU_VPN 0xfffffc00 /* virtual page number */ +#define xPTEU_PID 0x000000ff /* process identifier to which applicable */ + +#define IPTEL2 __SYSREG(0xc00000a8, u32) /* instruction TLB entry */ +#define DPTEL2 __SYSREG(0xc00000b8, u32) /* data TLB entry */ +#define xPTEL2_V 0x00000001 /* TLB entry valid */ +#define xPTEL2_C 0x00000002 /* cacheable */ +#define xPTEL2_PV 0x00000004 /* page valid */ +#define xPTEL2_D 0x00000008 /* dirty */ +#define xPTEL2_PR 0x00000070 /* page protection */ +#define xPTEL2_PR_ROK 0x00000000 /* - R/O kernel */ +#define xPTEL2_PR_RWK 0x00000040 /* - R/W kernel */ +#define xPTEL2_PR_ROK_ROU 0x00000020 /* - R/O kernel and R/O user */ +#define xPTEL2_PR_RWK_ROU 0x00000060 /* - R/W kernel and R/O user */ +#define xPTEL2_PR_RWK_RWU 0x00000070 /* - R/W kernel and R/W user */ +#define xPTEL2_G 0x00000080 /* global (use PID if 0) */ +#define xPTEL2_PS 0x00000300 /* page size */ +#define xPTEL2_PS_4Kb 0x00000000 /* - 4Kb page */ +#define xPTEL2_PS_128Kb 0x00000100 /* - 128Kb page */ +#define xPTEL2_PS_1Kb 0x00000200 /* - 1Kb page */ +#define xPTEL2_PS_4Mb 0x00000300 /* - 4Mb page */ +#define xPTEL2_PPN 0xfffffc00 /* physical page number */ + +#define MMUFCR __SYSREGC(0xc000009c, u32) /* MMU exception cause */ +#define MMUFCR_IFC __SYSREGC(0xc000009c, u16) /* MMU instruction excep cause */ +#define MMUFCR_DFC __SYSREGC(0xc000009e, u16) /* MMU data exception cause */ +#define MMUFCR_xFC_TLBMISS 0x0001 /* TLB miss flag */ +#define MMUFCR_xFC_INITWR 0x0002 /* initial write excep flag */ +#define MMUFCR_xFC_PGINVAL 0x0004 /* page invalid excep flag */ +#define MMUFCR_xFC_PROTVIOL 0x0008 /* protection violation excep flag */ +#define MMUFCR_xFC_ACCESS 0x0010 /* access level flag */ +#define MMUFCR_xFC_ACCESS_USR 0x0000 /* - user mode */ +#define MMUFCR_xFC_ACCESS_SR 0x0010 /* - supervisor mode */ +#define MMUFCR_xFC_TYPE 0x0020 /* access type flag */ +#define MMUFCR_xFC_TYPE_READ 0x0000 /* - read */ +#define MMUFCR_xFC_TYPE_WRITE 0x0020 /* - write */ +#define MMUFCR_xFC_PR 0x01c0 /* page protection flag */ +#define MMUFCR_xFC_PR_ROK 0x0000 /* - R/O kernel */ +#define MMUFCR_xFC_PR_RWK 0x0100 /* - R/W kernel */ +#define MMUFCR_xFC_PR_ROK_ROU 0x0080 /* - R/O kernel and R/O user */ +#define MMUFCR_xFC_PR_RWK_ROU 0x0180 /* - R/W kernel and R/O user */ +#define MMUFCR_xFC_PR_RWK_RWU 0x01c0 /* - R/W kernel and R/W user */ +#define MMUFCR_xFC_ILLADDR 0x0200 /* illegal address excep flag */ + +#endif /* __KERNEL__ */ + +#endif /* _ASM_CPU_REGS_H */ diff --git a/arch/mn10300/include/asm/cputime.h b/arch/mn10300/include/asm/cputime.h new file mode 100644 index 00000000000..6d68ad7e0ea --- /dev/null +++ b/arch/mn10300/include/asm/cputime.h @@ -0,0 +1 @@ +#include <asm-generic/cputime.h> diff --git a/arch/mn10300/include/asm/current.h b/arch/mn10300/include/asm/current.h new file mode 100644 index 00000000000..ca6027d8374 --- /dev/null +++ b/arch/mn10300/include/asm/current.h @@ -0,0 +1,37 @@ +/* MN10300 Current task structure accessor + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_CURRENT_H +#define _ASM_CURRENT_H + +#include <linux/thread_info.h> + +/* + * dedicate E2 to keeping the current task pointer + */ +#ifdef CONFIG_MN10300_CURRENT_IN_E2 + +register struct task_struct *const current asm("e2") __attribute__((used)); + +#define get_current() current + +extern struct task_struct *__current; + +#else +static inline __attribute__((const)) +struct task_struct *get_current(void) +{ + return current_thread_info()->task; +} + +#define current get_current() +#endif + +#endif /* _ASM_CURRENT_H */ diff --git a/arch/mn10300/include/asm/delay.h b/arch/mn10300/include/asm/delay.h new file mode 100644 index 00000000000..34517b35939 --- /dev/null +++ b/arch/mn10300/include/asm/delay.h @@ -0,0 +1,19 @@ +/* MN10300 Uninterruptible delay routines + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_DELAY_H +#define _ASM_DELAY_H + +extern void __udelay(unsigned long usecs); +extern void __delay(unsigned long loops); + +#define udelay(n) __udelay(n) + +#endif /* _ASM_DELAY_H */ diff --git a/arch/mn10300/include/asm/device.h b/arch/mn10300/include/asm/device.h new file mode 100644 index 00000000000..f0a4c256403 --- /dev/null +++ b/arch/mn10300/include/asm/device.h @@ -0,0 +1 @@ +#include <asm-generic/device.h> diff --git a/arch/mn10300/include/asm/div64.h b/arch/mn10300/include/asm/div64.h new file mode 100644 index 00000000000..3a8329b3e86 --- /dev/null +++ b/arch/mn10300/include/asm/div64.h @@ -0,0 +1,100 @@ +/* MN10300 64-bit division + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_DIV64 +#define _ASM_DIV64 + +#include <linux/types.h> + +extern void ____unhandled_size_in_do_div___(void); + +/* + * divide n by base, leaving the result in n and returning the remainder + * - we can do this quite efficiently on the MN10300 by cascading the divides + * through the MDR register + */ +#define do_div(n, base) \ +({ \ + unsigned __rem = 0; \ + if (sizeof(n) <= 4) { \ + asm("mov %1,mdr \n" \ + "divu %2,%0 \n" \ + "mov mdr,%1 \n" \ + : "+r"(n), "=d"(__rem) \ + : "r"(base), "1"(__rem) \ + : "cc" \ + ); \ + } else if (sizeof(n) <= 8) { \ + union { \ + unsigned long long l; \ + u32 w[2]; \ + } __quot; \ + __quot.l = n; \ + asm("mov %0,mdr \n" /* MDR = 0 */ \ + "divu %3,%1 \n" \ + /* __quot.MSL = __div.MSL / base, */ \ + /* MDR = MDR:__div.MSL % base */ \ + "divu %3,%2 \n" \ + /* __quot.LSL = MDR:__div.LSL / base, */ \ + /* MDR = MDR:__div.LSL % base */ \ + "mov mdr,%0 \n" \ + : "=d"(__rem), "=r"(__quot.w[1]), "=r"(__quot.w[0]) \ + : "r"(base), "0"(__rem), "1"(__quot.w[1]), \ + "2"(__quot.w[0]) \ + : "cc" \ + ); \ + n = __quot.l; \ + } else { \ + ____unhandled_size_in_do_div___(); \ + } \ + __rem; \ +}) + +/* + * do an unsigned 32-bit multiply and divide with intermediate 64-bit product + * so as not to lose accuracy + * - we use the MDR register to hold the MSW of the product + */ +static inline __attribute__((const)) +unsigned __muldiv64u(unsigned val, unsigned mult, unsigned div) +{ + unsigned result; + + asm("mulu %2,%0 \n" /* MDR:val = val*mult */ + "divu %3,%0 \n" /* val = MDR:val/div; + * MDR = MDR:val%div */ + : "=r"(result) + : "0"(val), "ir"(mult), "r"(div) + ); + + return result; +} + +/* + * do a signed 32-bit multiply and divide with intermediate 64-bit product so + * as not to lose accuracy + * - we use the MDR register to hold the MSW of the product + */ +static inline __attribute__((const)) +signed __muldiv64s(signed val, signed mult, signed div) +{ + signed result; + + asm("mul %2,%0 \n" /* MDR:val = val*mult */ + "div %3,%0 \n" /* val = MDR:val/div; + * MDR = MDR:val%div */ + : "=r"(result) + : "0"(val), "ir"(mult), "r"(div) + ); + + return result; +} + +#endif /* _ASM_DIV64 */ diff --git a/arch/mn10300/include/asm/dma-mapping.h b/arch/mn10300/include/asm/dma-mapping.h new file mode 100644 index 00000000000..ccae8f6c632 --- /dev/null +++ b/arch/mn10300/include/asm/dma-mapping.h @@ -0,0 +1,234 @@ +/* DMA mapping routines for the MN10300 arch + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_DMA_MAPPING_H +#define _ASM_DMA_MAPPING_H + +#include <linux/mm.h> +#include <linux/scatterlist.h> + +#include <asm/cache.h> +#include <asm/io.h> + +extern void *dma_alloc_coherent(struct device *dev, size_t size, + dma_addr_t *dma_handle, int flag); + +extern void dma_free_coherent(struct device *dev, size_t size, + void *vaddr, dma_addr_t dma_handle); + +#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent((d), (s), (h), (f)) +#define dma_free_noncoherent(d, s, v, h) dma_free_coherent((d), (s), (v), (h)) + +/* + * Map a single buffer of the indicated size for DMA in streaming mode. The + * 32-bit bus address to use is returned. + * + * Once the device is given the dma address, the device owns this memory until + * either pci_unmap_single or pci_dma_sync_single is performed. + */ +static inline +dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size, + enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); + mn10300_dcache_flush_inv(); + return virt_to_bus(ptr); +} + +/* + * Unmap a single streaming mode DMA translation. The dma_addr and size must + * match what was provided for in a previous pci_map_single call. All other + * usages are undefined. + * + * After this call, reads by the cpu to the buffer are guarenteed to see + * whatever the device wrote there. + */ +static inline +void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, + enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); +} + +/* + * Map a set of buffers described by scatterlist in streaming mode for DMA. + * This is the scather-gather version of the above pci_map_single interface. + * Here the scatter gather list elements are each tagged with the appropriate + * dma address and length. They are obtained via sg_dma_{address,length}(SG). + * + * NOTE: An implementation may be able to use a smaller number of DMA + * address/length pairs than there are SG table elements. (for example + * via virtual mapping capabilities) The routine returns the number of + * addr/length pairs actually used, at most nents. + * + * Device ownership issues as mentioned above for pci_map_single are the same + * here. + */ +static inline +int dma_map_sg(struct device *dev, struct scatterlist *sglist, int nents, + enum dma_data_direction direction) +{ + struct scatterlist *sg; + int i; + + BUG_ON(!valid_dma_direction(direction)); + WARN_ON(nents == 0 || sglist[0].length == 0); + + for_each_sg(sglist, sg, nents, i) { + BUG_ON(!sg_page(sg)); + + sg->dma_address = sg_phys(sg); + } + + mn10300_dcache_flush_inv(); + return nents; +} + +/* + * Unmap a set of streaming mode DMA translations. + * Again, cpu read rules concerning calls here are the same as for + * pci_unmap_single() above. + */ +static inline +void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries, + enum dma_data_direction direction) +{ + BUG_ON(!valid_dma_direction(direction)); +} + +/* + * pci_{map,unmap}_single_page maps a kernel page to a dma_addr_t. identical + * to pci_map_single, but takes a struct page instead of a virtual address + */ +static inline +dma_addr_t dma_map_page(struct device *dev, struct page *page, + unsigned long offset, size_t size, + enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); + return page_to_bus(page) + offset; +} + +static inline +void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size, + enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); +} + +/* + * Make physical memory consistent for a single streaming mode DMA translation + * after a transfer. + * + * If you perform a pci_map_single() but wish to interrogate the buffer using + * the cpu, yet do not wish to teardown the PCI dma mapping, you must call this + * function before doing so. At the next point you give the PCI dma address + * back to the card, the device again owns the buffer. + */ +static inline +void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, + size_t size, enum dma_data_direction direction) +{ +} + +static inline +void dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, + size_t size, enum dma_data_direction direction) +{ + mn10300_dcache_flush_inv(); +} + +static inline +void dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle, + unsigned long offset, size_t size, + enum dma_data_direction direction) +{ +} + +static inline void +dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle, + unsigned long offset, size_t size, + enum dma_data_direction direction) +{ + mn10300_dcache_flush_inv(); +} + + +/* + * Make physical memory consistent for a set of streaming mode DMA translations + * after a transfer. + * + * The same as pci_dma_sync_single but for a scatter-gather list, same rules + * and usage. + */ +static inline +void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, + int nelems, enum dma_data_direction direction) +{ +} + +static inline +void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, + int nelems, enum dma_data_direction direction) +{ + mn10300_dcache_flush_inv(); +} + +static inline +int dma_mapping_error(struct device *dev, dma_addr_t dma_addr) +{ + return 0; +} + +/* + * Return whether the given PCI device DMA address mask can be supported + * properly. For example, if your device can only drive the low 24-bits during + * PCI bus mastering, then you would pass 0x00ffffff as the mask to this + * function. + */ +static inline +int dma_supported(struct device *dev, u64 mask) +{ + /* + * we fall back to GFP_DMA when the mask isn't all 1s, so we can't + * guarantee allocations that must be within a tighter range than + * GFP_DMA + */ + if (mask < 0x00ffffff) + return 0; + return 1; +} + +static inline +int dma_set_mask(struct device *dev, u64 mask) +{ + if (!dev->dma_mask || !dma_supported(dev, mask)) + return -EIO; + + *dev->dma_mask = mask; + return 0; +} + +static inline +int dma_get_cache_alignment(void) +{ + return 1 << L1_CACHE_SHIFT; +} + +#define dma_is_consistent(d) (1) + +static inline +void dma_cache_sync(void *vaddr, size_t size, + enum dma_data_direction direction) +{ + mn10300_dcache_flush_inv(); +} + +#endif diff --git a/arch/mn10300/include/asm/dma.h b/arch/mn10300/include/asm/dma.h new file mode 100644 index 00000000000..098df2e617a --- /dev/null +++ b/arch/mn10300/include/asm/dma.h @@ -0,0 +1,118 @@ +/* MN10300 ISA DMA handlers and definitions + * + * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_DMA_H +#define _ASM_DMA_H + +#include <asm/system.h> +#include <linux/spinlock.h> +#include <asm/io.h> +#include <linux/delay.h> + +#undef MAX_DMA_CHANNELS /* switch off linux/kernel/dma.c */ +#define MAX_DMA_ADDRESS 0xbfffffff + +extern spinlock_t dma_spin_lock; + +static inline unsigned long claim_dma_lock(void) +{ + unsigned long flags; + spin_lock_irqsave(&dma_spin_lock, flags); + return flags; +} + +static inline void release_dma_lock(unsigned long flags) +{ + spin_unlock_irqrestore(&dma_spin_lock, flags); +} + +/* enable/disable a specific DMA channel */ +static inline void enable_dma(unsigned int dmanr) +{ +} + +static inline void disable_dma(unsigned int dmanr) +{ +} + +/* Clear the 'DMA Pointer Flip Flop'. + * Write 0 for LSB/MSB, 1 for MSB/LSB access. + * Use this once to initialize the FF to a known state. + * After that, keep track of it. :-) + * --- In order to do that, the DMA routines below should --- + * --- only be used while holding the DMA lock ! --- + */ +static inline void clear_dma_ff(unsigned int dmanr) +{ +} + +/* set mode (above) for a specific DMA channel */ +static inline void set_dma_mode(unsigned int dmanr, char mode) +{ +} + +/* Set only the page register bits of the transfer address. + * This is used for successive transfers when we know the contents of + * the lower 16 bits of the DMA current address register, but a 64k boundary + * may have been crossed. + */ +static inline void set_dma_page(unsigned int dmanr, char pagenr) +{ +} + + +/* Set transfer address & page bits for specific DMA channel. + * Assumes dma flipflop is clear. + */ +static inline void set_dma_addr(unsigned int dmanr, unsigned int a) +{ +} + + +/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for + * a specific DMA channel. + * You must ensure the parameters are valid. + * NOTE: from a manual: "the number of transfers is one more + * than the initial word count"! This is taken into account. + * Assumes dma flip-flop is clear. + * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7. + */ +static inline void set_dma_count(unsigned int dmanr, unsigned int count) +{ +} + + +/* Get DMA residue count. After a DMA transfer, this + * should return zero. Reading this while a DMA transfer is + * still in progress will return unpredictable results. + * If called before the channel has been used, it may return 1. + * Otherwise, it returns the number of _bytes_ left to transfer. + * + * Assumes DMA flip-flop is clear. + */ +static inline int get_dma_residue(unsigned int dmanr) +{ + return 0; +} + + +/* These are in kernel/dma.c: */ +extern int request_dma(unsigned int dmanr, const char *device_id); +extern void free_dma(unsigned int dmanr); + +/* From PCI */ + +#ifdef CONFIG_PCI +extern int isa_dma_bridge_buggy; +#else +#define isa_dma_bridge_buggy (0) +#endif + +#endif /* _ASM_DMA_H */ diff --git a/arch/mn10300/include/asm/dmactl-regs.h b/arch/mn10300/include/asm/dmactl-regs.h new file mode 100644 index 00000000000..58a199da0f4 --- /dev/null +++ b/arch/mn10300/include/asm/dmactl-regs.h @@ -0,0 +1,101 @@ +/* MN10300 on-board DMA controller registers + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_DMACTL_REGS_H +#define _ASM_DMACTL_REGS_H + +#include <asm/cpu-regs.h> + +#ifdef __KERNEL__ + +/* DMA registers */ +#define DMxCTR(N) __SYSREG(0xd2000000 + ((N) * 0x100), u32) /* control reg */ +#define DMxCTR_BG 0x0000001f /* transfer request source */ +#define DMxCTR_BG_SOFT 0x00000000 /* - software source */ +#define DMxCTR_BG_SC0TX 0x00000002 /* - serial port 0 transmission */ +#define DMxCTR_BG_SC0RX 0x00000003 /* - serial port 0 reception */ +#define DMxCTR_BG_SC1TX 0x00000004 /* - serial port 1 transmission */ +#define DMxCTR_BG_SC1RX 0x00000005 /* - serial port 1 reception */ +#define DMxCTR_BG_SC2TX 0x00000006 /* - serial port 2 transmission */ +#define DMxCTR_BG_SC2RX 0x00000007 /* - serial port 2 reception */ +#define DMxCTR_BG_TM0UFLOW 0x00000008 /* - timer 0 underflow */ +#define DMxCTR_BG_TM1UFLOW 0x00000009 /* - timer 1 underflow */ +#define DMxCTR_BG_TM2UFLOW 0x0000000a /* - timer 2 underflow */ +#define DMxCTR_BG_TM3UFLOW 0x0000000b /* - timer 3 underflow */ +#define DMxCTR_BG_TM6ACMPCAP 0x0000000c /* - timer 6A compare/capture */ +#define DMxCTR_BG_AFE 0x0000000d /* - analogue front-end interrupt source */ +#define DMxCTR_BG_ADC 0x0000000e /* - A/D conversion end interrupt source */ +#define DMxCTR_BG_IRDA 0x0000000f /* - IrDA interrupt source */ +#define DMxCTR_BG_RTC 0x00000010 /* - RTC interrupt source */ +#define DMxCTR_BG_XIRQ0 0x00000011 /* - XIRQ0 pin interrupt source */ +#define DMxCTR_BG_XIRQ1 0x00000012 /* - XIRQ1 pin interrupt source */ +#define DMxCTR_BG_XDMR0 0x00000013 /* - external request 0 source (XDMR0 pin) */ +#define DMxCTR_BG_XDMR1 0x00000014 /* - external request 1 source (XDMR1 pin) */ +#define DMxCTR_SAM 0x000000e0 /* DMA transfer src addr mode */ +#define DMxCTR_SAM_INCR 0x00000000 /* - increment */ +#define DMxCTR_SAM_DECR 0x00000020 /* - decrement */ +#define DMxCTR_SAM_FIXED 0x00000040 /* - fixed */ +#define DMxCTR_DAM 0x00000000 /* DMA transfer dest addr mode */ +#define DMxCTR_DAM_INCR 0x00000000 /* - increment */ +#define DMxCTR_DAM_DECR 0x00000100 /* - decrement */ +#define DMxCTR_DAM_FIXED 0x00000200 /* - fixed */ +#define DMxCTR_TM 0x00001800 /* DMA transfer mode */ +#define DMxCTR_TM_BATCH 0x00000000 /* - batch transfer */ +#define DMxCTR_TM_INTERM 0x00001000 /* - intermittent transfer */ +#define DMxCTR_UT 0x00006000 /* DMA transfer unit */ +#define DMxCTR_UT_1 0x00000000 /* - 1 byte */ +#define DMxCTR_UT_2 0x00002000 /* - 2 byte */ +#define DMxCTR_UT_4 0x00004000 /* - 4 byte */ +#define DMxCTR_UT_16 0x00006000 /* - 16 byte */ +#define DMxCTR_TEN 0x00010000 /* DMA channel transfer enable */ +#define DMxCTR_RQM 0x00060000 /* external request input source mode */ +#define DMxCTR_RQM_FALLEDGE 0x00000000 /* - falling edge */ +#define DMxCTR_RQM_RISEEDGE 0x00020000 /* - rising edge */ +#define DMxCTR_RQM_LOLEVEL 0x00040000 /* - low level */ +#define DMxCTR_RQM_HILEVEL 0x00060000 /* - high level */ +#define DMxCTR_RQF 0x01000000 /* DMA transfer request flag */ +#define DMxCTR_XEND 0x80000000 /* DMA transfer end flag */ + +#define DMxSRC(N) __SYSREG(0xd2000004 + ((N) * 0x100), u32) /* control reg */ + +#define DMxDST(N) __SYSREG(0xd2000008 + ((N) * 0x100), u32) /* src addr reg */ + +#define DMxSIZ(N) __SYSREG(0xd200000c + ((N) * 0x100), u32) /* dest addr reg */ +#define DMxSIZ_CT 0x000fffff /* number of bytes to transfer */ + +#define DMxCYC(N) __SYSREG(0xd2000010 + ((N) * 0x100), u32) /* intermittent + * size reg */ +#define DMxCYC_CYC 0x000000ff /* number of interrmittent transfers -1 */ + +#define DM0IRQ 16 /* DMA channel 0 complete IRQ */ +#define DM1IRQ 17 /* DMA channel 1 complete IRQ */ +#define DM2IRQ 18 /* DMA channel 2 complete IRQ */ +#define DM3IRQ 19 /* DMA channel 3 complete IRQ */ + +#define DM0ICR GxICR(DM0IRQ) /* DMA channel 0 complete intr ctrl reg */ +#define DM1ICR GxICR(DM0IR1) /* DMA channel 1 complete intr ctrl reg */ +#define DM2ICR GxICR(DM0IR2) /* DMA channel 2 complete intr ctrl reg */ +#define DM3ICR GxICR(DM0IR3) /* DMA channel 3 complete intr ctrl reg */ + +#ifndef __ASSEMBLY__ + +struct mn10300_dmactl_regs { + u32 ctr; + const void *src; + void *dst; + u32 siz; + u32 cyc; +} __attribute__((aligned(0x100))); + +#endif /* __ASSEMBLY__ */ + +#endif /* __KERNEL__ */ + +#endif /* _ASM_DMACTL_REGS_H */ diff --git a/arch/mn10300/include/asm/elf.h b/arch/mn10300/include/asm/elf.h new file mode 100644 index 00000000000..bf09f8bb392 --- /dev/null +++ b/arch/mn10300/include/asm/elf.h @@ -0,0 +1,147 @@ +/* MN10300 ELF constant and register definitions + * + * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_ELF_H +#define _ASM_ELF_H + +#include <linux/utsname.h> +#include <asm/ptrace.h> +#include <asm/user.h> + +/* + * AM33 relocations + */ +#define R_MN10300_NONE 0 /* No reloc. */ +#define R_MN10300_32 1 /* Direct 32 bit. */ +#define R_MN10300_16 2 /* Direct 16 bit. */ +#define R_MN10300_8 3 /* Direct 8 bit. */ +#define R_MN10300_PCREL32 4 /* PC-relative 32-bit. */ +#define R_MN10300_PCREL16 5 /* PC-relative 16-bit signed. */ +#define R_MN10300_PCREL8 6 /* PC-relative 8-bit signed. */ +#define R_MN10300_24 9 /* Direct 24 bit. */ +#define R_MN10300_RELATIVE 23 /* Adjust by program base. */ + +/* + * ELF register definitions.. + */ +typedef unsigned long elf_greg_t; + +#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t)) +typedef elf_greg_t elf_gregset_t[ELF_NGREG]; + +#define ELF_NFPREG 32 +typedef float elf_fpreg_t; + +typedef struct { + elf_fpreg_t fpregs[ELF_NFPREG]; + u_int32_t fpcr; +} elf_fpregset_t; + +extern int dump_fpu(struct pt_regs *, elf_fpregset_t *); + +/* + * This is used to ensure we don't load something for the wrong architecture + */ +#define elf_check_arch(x) \ + (((x)->e_machine == EM_CYGNUS_MN10300) || \ + ((x)->e_machine == EM_MN10300)) + +/* + * These are used to set parameters in the core dumps. + */ +#define ELF_CLASS ELFCLASS32 +#define ELF_DATA ELFDATA2LSB +#define ELF_ARCH EM_MN10300 + +/* + * ELF process initialiser + */ +#define ELF_PLAT_INIT(_r, load_addr) \ +do { \ + struct pt_regs *_ur = current->thread.uregs; \ + _ur->a3 = 0; _ur->a2 = 0; _ur->d3 = 0; _ur->d2 = 0; \ + _ur->mcvf = 0; _ur->mcrl = 0; _ur->mcrh = 0; _ur->mdrq = 0; \ + _ur->e1 = 0; _ur->e0 = 0; _ur->e7 = 0; _ur->e6 = 0; \ + _ur->e5 = 0; _ur->e4 = 0; _ur->e3 = 0; _ur->e2 = 0; \ + _ur->lar = 0; _ur->lir = 0; _ur->mdr = 0; \ + _ur->a1 = 0; _ur->a0 = 0; _ur->d1 = 0; _ur->d0 = 0; \ +} while (0) + +#define USE_ELF_CORE_DUMP +#define ELF_EXEC_PAGESIZE 4096 + +/* + * This is the location that an ET_DYN program is loaded if exec'ed. Typical + * use of this is to invoke "./ld.so someprog" to test out a new version of + * the loader. We need to make sure that it is out of the way of the program + * that it will "exec", and that there is sufficient room for the brk. + * - must clear the VMALLOC area + */ +#define ELF_ET_DYN_BASE 0x04000000 + +/* + * regs is struct pt_regs, pr_reg is elf_gregset_t (which is + * now struct user_regs, they are different) + * - ELF_CORE_COPY_REGS has been guessed, and may be wrong + */ +#define ELF_CORE_COPY_REGS(pr_reg, regs) \ +do { \ + pr_reg[0] = regs->a3; \ + pr_reg[1] = regs->a2; \ + pr_reg[2] = regs->d3; \ + pr_reg[3] = regs->d2; \ + pr_reg[4] = regs->mcvf; \ + pr_reg[5] = regs->mcrl; \ + pr_reg[6] = regs->mcrh; \ + pr_reg[7] = regs->mdrq; \ + pr_reg[8] = regs->e1; \ + pr_reg[9] = regs->e0; \ + pr_reg[10] = regs->e7; \ + pr_reg[11] = regs->e6; \ + pr_reg[12] = regs->e5; \ + pr_reg[13] = regs->e4; \ + pr_reg[14] = regs->e3; \ + pr_reg[15] = regs->e2; \ + pr_reg[16] = regs->sp; \ + pr_reg[17] = regs->lar; \ + pr_reg[18] = regs->lir; \ + pr_reg[19] = regs->mdr; \ + pr_reg[20] = regs->a1; \ + pr_reg[21] = regs->a0; \ + pr_reg[22] = regs->d1; \ + pr_reg[23] = regs->d0; \ + pr_reg[24] = regs->orig_d0; \ + pr_reg[25] = regs->epsw; \ + pr_reg[26] = regs->pc; \ +} while (0); + +/* + * This yields a mask that user programs can use to figure out what + * instruction set this CPU supports. This could be done in user space, + * but it's not easy, and we've already done it here. + */ +#define ELF_HWCAP (0) + +/* + * This yields a string that ld.so will use to load implementation + * specific libraries for optimization. This is more specific in + * intent than poking at uname or /proc/cpuinfo. + * + * For the moment, we have only optimizations for the Intel generations, + * but that could change... + */ +#define ELF_PLATFORM (NULL) + +#ifdef __KERNEL__ +#define SET_PERSONALITY(ex) set_personality(PER_LINUX) +#endif + +#endif /* _ASM_ELF_H */ diff --git a/arch/mn10300/include/asm/emergency-restart.h b/arch/mn10300/include/asm/emergency-restart.h new file mode 100644 index 00000000000..3711bd9d50b --- /dev/null +++ b/arch/mn10300/include/asm/emergency-restart.h @@ -0,0 +1 @@ +#include <asm-generic/emergency-restart.h> diff --git a/arch/mn10300/include/asm/errno.h b/arch/mn10300/include/asm/errno.h new file mode 100644 index 00000000000..4c82b503d92 --- /dev/null +++ b/arch/mn10300/include/asm/errno.h @@ -0,0 +1 @@ +#include <asm-generic/errno.h> diff --git a/arch/mn10300/include/asm/exceptions.h b/arch/mn10300/include/asm/exceptions.h new file mode 100644 index 00000000000..fa16466ef3f --- /dev/null +++ b/arch/mn10300/include/asm/exceptions.h @@ -0,0 +1,121 @@ +/* MN10300 Microcontroller core exceptions + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_EXCEPTIONS_H +#define _ASM_EXCEPTIONS_H + +#include <linux/linkage.h> + +/* + * define the breakpoint instruction opcode to use + * - note that the JTAG unit steals 0xFF, so we want to avoid that if we can + * (can use 0xF7) + */ +#define GDBSTUB_BKPT 0xFF + +#ifndef __ASSEMBLY__ + +/* + * enumeration of exception codes (as extracted from TBR MSW) + */ +enum exception_code { + EXCEP_RESET = 0x000000, /* reset */ + + /* MMU exceptions */ + EXCEP_ITLBMISS = 0x000100, /* instruction TLB miss */ + EXCEP_DTLBMISS = 0x000108, /* data TLB miss */ + EXCEP_IAERROR = 0x000110, /* instruction address */ + EXCEP_DAERROR = 0x000118, /* data address */ + + /* system exceptions */ + EXCEP_TRAP = 0x000128, /* program interrupt (PI instruction) */ + EXCEP_ISTEP = 0x000130, /* single step */ + EXCEP_IBREAK = 0x000150, /* instruction breakpoint */ + EXCEP_OBREAK = 0x000158, /* operand breakpoint */ + EXCEP_PRIVINS = 0x000160, /* privileged instruction execution */ + EXCEP_UNIMPINS = 0x000168, /* unimplemented instruction execution */ + EXCEP_UNIMPEXINS = 0x000170, /* unimplemented extended instruction execution */ + EXCEP_MEMERR = 0x000178, /* illegal memory access */ + EXCEP_MISALIGN = 0x000180, /* misalignment */ + EXCEP_BUSERROR = 0x000188, /* bus error */ + EXCEP_ILLINSACC = 0x000190, /* illegal instruction access */ + EXCEP_ILLDATACC = 0x000198, /* illegal data access */ + EXCEP_IOINSACC = 0x0001a0, /* I/O space instruction access */ + EXCEP_PRIVINSACC = 0x0001a8, /* privileged space instruction access */ + EXCEP_PRIVDATACC = 0x0001b0, /* privileged space data access */ + EXCEP_DATINSACC = 0x0001b8, /* data space instruction access */ + EXCEP_DOUBLE_FAULT = 0x000200, /* double fault */ + + /* FPU exceptions */ + EXCEP_FPU_DISABLED = 0x0001c0, /* FPU disabled */ + EXCEP_FPU_UNIMPINS = 0x0001c8, /* FPU unimplemented operation */ + EXCEP_FPU_OPERATION = 0x0001d0, /* FPU operation */ + + /* interrupts */ + EXCEP_WDT = 0x000240, /* watchdog timer overflow */ + EXCEP_NMI = 0x000248, /* non-maskable interrupt */ + EXCEP_IRQ_LEVEL0 = 0x000280, /* level 0 maskable interrupt */ + EXCEP_IRQ_LEVEL1 = 0x000288, /* level 1 maskable interrupt */ + EXCEP_IRQ_LEVEL2 = 0x000290, /* level 2 maskable interrupt */ + EXCEP_IRQ_LEVEL3 = 0x000298, /* level 3 maskable interrupt */ + EXCEP_IRQ_LEVEL4 = 0x0002a0, /* level 4 maskable interrupt */ + EXCEP_IRQ_LEVEL5 = 0x0002a8, /* level 5 maskable interrupt */ + EXCEP_IRQ_LEVEL6 = 0x0002b0, /* level 6 maskable interrupt */ + + /* system calls */ + EXCEP_SYSCALL0 = 0x000300, /* system call 0 */ + EXCEP_SYSCALL1 = 0x000308, /* system call 1 */ + EXCEP_SYSCALL2 = 0x000310, /* system call 2 */ + EXCEP_SYSCALL3 = 0x000318, /* system call 3 */ + EXCEP_SYSCALL4 = 0x000320, /* system call 4 */ + EXCEP_SYSCALL5 = 0x000328, /* system call 5 */ + EXCEP_SYSCALL6 = 0x000330, /* system call 6 */ + EXCEP_SYSCALL7 = 0x000338, /* system call 7 */ + EXCEP_SYSCALL8 = 0x000340, /* system call 8 */ + EXCEP_SYSCALL9 = 0x000348, /* system call 9 */ + EXCEP_SYSCALL10 = 0x000350, /* system call 10 */ + EXCEP_SYSCALL11 = 0x000358, /* system call 11 */ + EXCEP_SYSCALL12 = 0x000360, /* system call 12 */ + EXCEP_SYSCALL13 = 0x000368, /* system call 13 */ + EXCEP_SYSCALL14 = 0x000370, /* system call 14 */ + EXCEP_SYSCALL15 = 0x000378, /* system call 15 */ +}; + +extern void __set_intr_stub(enum exception_code code, void *handler); +extern void set_intr_stub(enum exception_code code, void *handler); +extern void set_jtag_stub(enum exception_code code, void *handler); + +struct pt_regs; + +extern asmlinkage void __common_exception(void); +extern asmlinkage void itlb_miss(void); +extern asmlinkage void dtlb_miss(void); +extern asmlinkage void itlb_aerror(void); +extern asmlinkage void dtlb_aerror(void); +extern asmlinkage void raw_bus_error(void); +extern asmlinkage void double_fault(void); +extern asmlinkage int system_call(struct pt_regs *); +extern asmlinkage void fpu_exception(struct pt_regs *, enum exception_code); +extern asmlinkage void nmi(struct pt_regs *, enum exception_code); +extern asmlinkage void uninitialised_exception(struct pt_regs *, + enum exception_code); +extern asmlinkage void irq_handler(void); +extern asmlinkage void profile_handler(void); +extern asmlinkage void nmi_handler(void); +extern asmlinkage void misalignment(struct pt_regs *, enum exception_code); + +extern void die(const char *, struct pt_regs *, enum exception_code) + ATTRIB_NORET; + +extern int die_if_no_fixup(const char *, struct pt_regs *, enum exception_code); + +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_EXCEPTIONS_H */ diff --git a/arch/mn10300/include/asm/fb.h b/arch/mn10300/include/asm/fb.h new file mode 100644 index 00000000000..697b24a91e1 --- /dev/null +++ b/arch/mn10300/include/asm/fb.h @@ -0,0 +1,23 @@ +/* MN10300 Frame buffer stuff + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_FB_H +#define _ASM_FB_H + +#include <linux/fb.h> + +#define fb_pgprotect(...) do {} while (0) + +static inline int fb_is_primary_device(struct fb_info *info) +{ + return 0; +} + +#endif /* _ASM_FB_H */ diff --git a/arch/mn10300/include/asm/fcntl.h b/arch/mn10300/include/asm/fcntl.h new file mode 100644 index 00000000000..46ab12db573 --- /dev/null +++ b/arch/mn10300/include/asm/fcntl.h @@ -0,0 +1 @@ +#include <asm-generic/fcntl.h> diff --git a/arch/mn10300/include/asm/fpu.h b/arch/mn10300/include/asm/fpu.h new file mode 100644 index 00000000000..64a2b83a7a6 --- /dev/null +++ b/arch/mn10300/include/asm/fpu.h @@ -0,0 +1,85 @@ +/* MN10300 FPU definitions + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * Derived from include/asm-i386/i387.h: Copyright (C) 1994 Linus Torvalds + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_FPU_H +#define _ASM_FPU_H + +#include <asm/processor.h> +#include <asm/sigcontext.h> +#include <asm/user.h> + +#ifdef __KERNEL__ + +/* the task that owns the FPU state */ +extern struct task_struct *fpu_state_owner; + +#define set_using_fpu(tsk) \ +do { \ + (tsk)->thread.fpu_flags |= THREAD_USING_FPU; \ +} while (0) + +#define clear_using_fpu(tsk) \ +do { \ + (tsk)->thread.fpu_flags &= ~THREAD_USING_FPU; \ +} while (0) + +#define is_using_fpu(tsk) ((tsk)->thread.fpu_flags & THREAD_USING_FPU) + +#define unlazy_fpu(tsk) \ +do { \ + preempt_disable(); \ + if (fpu_state_owner == (tsk)) \ + fpu_save(&tsk->thread.fpu_state); \ + preempt_enable(); \ +} while (0) + +#define exit_fpu() \ +do { \ + struct task_struct *__tsk = current; \ + preempt_disable(); \ + if (fpu_state_owner == __tsk) \ + fpu_state_owner = NULL; \ + preempt_enable(); \ +} while (0) + +#define flush_fpu() \ +do { \ + struct task_struct *__tsk = current; \ + preempt_disable(); \ + if (fpu_state_owner == __tsk) { \ + fpu_state_owner = NULL; \ + __tsk->thread.uregs->epsw &= ~EPSW_FE; \ + } \ + preempt_enable(); \ + clear_using_fpu(__tsk); \ +} while (0) + +extern asmlinkage void fpu_init_state(void); +extern asmlinkage void fpu_kill_state(struct task_struct *); +extern asmlinkage void fpu_disabled(struct pt_regs *, enum exception_code); +extern asmlinkage void fpu_exception(struct pt_regs *, enum exception_code); + +#ifdef CONFIG_FPU +extern asmlinkage void fpu_save(struct fpu_state_struct *); +extern asmlinkage void fpu_restore(struct fpu_state_struct *); +#else +#define fpu_save(a) +#define fpu_restore(a) +#endif /* CONFIG_FPU */ + +/* + * signal frame handlers + */ +extern int fpu_setup_sigcontext(struct fpucontext *buf); +extern int fpu_restore_sigcontext(struct fpucontext *buf); + +#endif /* __KERNEL__ */ +#endif /* _ASM_FPU_H */ diff --git a/arch/mn10300/include/asm/frame.inc b/arch/mn10300/include/asm/frame.inc new file mode 100644 index 00000000000..5b1949bdf03 --- /dev/null +++ b/arch/mn10300/include/asm/frame.inc @@ -0,0 +1,91 @@ +/* MN10300 Microcontroller core system register definitions -*- asm -*- + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_FRAME_INC +#define _ASM_FRAME_INC + +#ifndef __ASSEMBLY__ +#error not for use in C files +#endif + +#ifndef __ASM_OFFSETS_H__ +#include <asm/asm-offsets.h> +#endif + +#define pi break + +#define fp a3 + +############################################################################### +# +# build a stack frame from the registers +# - the caller has subtracted 4 from SP before coming here +# +############################################################################### +.macro SAVE_ALL + add -4,sp # next exception frame ptr save area + movm [other],(sp) + mov usp,a1 + mov a1,(sp) # USP in MOVM[other] dummy slot + movm [d2,d3,a2,a3,exreg0,exreg1,exother],(sp) + mov sp,fp # FRAME pointer in A3 + add -12,sp # allow for calls to be made + mov (__frame),a1 + mov a1,(REG_NEXT,fp) + mov fp,(__frame) + + and ~EPSW_FE,epsw # disable the FPU inside the kernel + + # we may be holding current in E2 +#ifdef CONFIG_MN10300_CURRENT_IN_E2 + mov (__current),e2 +#endif +.endm + +############################################################################### +# +# restore the registers from a stack frame +# +############################################################################### +.macro RESTORE_ALL + # peel back the stack to the calling frame + # - this permits execve() to discard extra frames due to kernel syscalls + mov (__frame),fp + mov fp,sp + mov (REG_NEXT,fp),d0 # userspace has regs->next == 0 + mov d0,(__frame) + +#ifndef CONFIG_MN10300_USING_JTAG + mov (REG_EPSW,fp),d0 + btst EPSW_T,d0 + beq 99f + + or EPSW_NMID,epsw + movhu (DCR),d1 + or 0x0001, d1 + movhu d1,(DCR) + +99: +#endif + movm (sp),[d2,d3,a2,a3,exreg0,exreg1,exother] + + # must restore usp even if returning to kernel space, + # when CONFIG_PREEMPT is enabled. + mov (sp),a1 # USP in MOVM[other] dummy slot + mov a1,usp + + movm (sp),[other] + add 8,sp + rti + +.endm + + +#endif /* _ASM_FRAME_INC */ diff --git a/arch/mn10300/include/asm/ftrace.h b/arch/mn10300/include/asm/ftrace.h new file mode 100644 index 00000000000..40a8c178f10 --- /dev/null +++ b/arch/mn10300/include/asm/ftrace.h @@ -0,0 +1 @@ +/* empty */ diff --git a/arch/mn10300/include/asm/futex.h b/arch/mn10300/include/asm/futex.h new file mode 100644 index 00000000000..0b745828f42 --- /dev/null +++ b/arch/mn10300/include/asm/futex.h @@ -0,0 +1 @@ +#include <asm-generic/futex.h> diff --git a/arch/mn10300/include/asm/gdb-stub.h b/arch/mn10300/include/asm/gdb-stub.h new file mode 100644 index 00000000000..e5a6368559a --- /dev/null +++ b/arch/mn10300/include/asm/gdb-stub.h @@ -0,0 +1,183 @@ +/* MN10300 Kernel GDB stub definitions + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * - Derived from asm-mips/gdb-stub.h (c) 1995 Andreas Busse + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_GDB_STUB_H +#define _ASM_GDB_STUB_H + +#include <asm/exceptions.h> + +/* + * register ID numbers in GDB remote protocol + */ + +#define GDB_REGID_PC 9 +#define GDB_REGID_FP 7 +#define GDB_REGID_SP 8 + +/* + * virtual stack layout for the GDB exception handler + */ +#define NUMREGS 64 + +#define GDB_FR_D0 (0 * 4) +#define GDB_FR_D1 (1 * 4) +#define GDB_FR_D2 (2 * 4) +#define GDB_FR_D3 (3 * 4) +#define GDB_FR_A0 (4 * 4) +#define GDB_FR_A1 (5 * 4) +#define GDB_FR_A2 (6 * 4) +#define GDB_FR_A3 (7 * 4) + +#define GDB_FR_SP (8 * 4) +#define GDB_FR_PC (9 * 4) +#define GDB_FR_MDR (10 * 4) +#define GDB_FR_EPSW (11 * 4) +#define GDB_FR_LIR (12 * 4) +#define GDB_FR_LAR (13 * 4) +#define GDB_FR_MDRQ (14 * 4) + +#define GDB_FR_E0 (15 * 4) +#define GDB_FR_E1 (16 * 4) +#define GDB_FR_E2 (17 * 4) +#define GDB_FR_E3 (18 * 4) +#define GDB_FR_E4 (19 * 4) +#define GDB_FR_E5 (20 * 4) +#define GDB_FR_E6 (21 * 4) +#define GDB_FR_E7 (22 * 4) + +#define GDB_FR_SSP (23 * 4) +#define GDB_FR_MSP (24 * 4) +#define GDB_FR_USP (25 * 4) +#define GDB_FR_MCRH (26 * 4) +#define GDB_FR_MCRL (27 * 4) +#define GDB_FR_MCVF (28 * 4) + +#define GDB_FR_FPCR (29 * 4) +#define GDB_FR_DUMMY0 (30 * 4) +#define GDB_FR_DUMMY1 (31 * 4) + +#define GDB_FR_FS0 (32 * 4) + +#define GDB_FR_SIZE (NUMREGS * 4) + +#ifndef __ASSEMBLY__ + +/* + * This is the same as above, but for the high-level + * part of the GDB stub. + */ + +struct gdb_regs { + /* saved main processor registers */ + u32 d0, d1, d2, d3, a0, a1, a2, a3; + u32 sp, pc, mdr, epsw, lir, lar, mdrq; + u32 e0, e1, e2, e3, e4, e5, e6, e7; + u32 ssp, msp, usp, mcrh, mcrl, mcvf; + + /* saved floating point registers */ + u32 fpcr, _dummy0, _dummy1; + u32 fs0, fs1, fs2, fs3, fs4, fs5, fs6, fs7; + u32 fs8, fs9, fs10, fs11, fs12, fs13, fs14, fs15; + u32 fs16, fs17, fs18, fs19, fs20, fs21, fs22, fs23; + u32 fs24, fs25, fs26, fs27, fs28, fs29, fs30, fs31; +}; + +/* + * Prototypes + */ +extern void show_registers_only(struct pt_regs *regs); + +extern asmlinkage void gdbstub_init(void); +extern asmlinkage void gdbstub_exit(int status); +extern asmlinkage void gdbstub_io_init(void); +extern asmlinkage void gdbstub_io_set_baud(unsigned baud); +extern asmlinkage int gdbstub_io_rx_char(unsigned char *_ch, int nonblock); +extern asmlinkage void gdbstub_io_tx_char(unsigned char ch); +extern asmlinkage void gdbstub_io_tx_flush(void); + +extern asmlinkage void gdbstub_io_rx_handler(void); +extern asmlinkage void gdbstub_rx_irq(struct pt_regs *, enum exception_code); +extern asmlinkage int gdbstub_intercept(struct pt_regs *, enum exception_code); +extern asmlinkage void gdbstub_exception(struct pt_regs *, enum exception_code); +extern asmlinkage void __gdbstub_bug_trap(void); +extern asmlinkage void __gdbstub_pause(void); +extern asmlinkage void start_kernel(void); + +#ifndef CONFIG_MN10300_CACHE_DISABLED +extern asmlinkage void gdbstub_purge_cache(void); +#else +#define gdbstub_purge_cache() do {} while (0) +#endif + +/* Used to prevent crashes in memory access */ +extern asmlinkage int gdbstub_read_byte(const u8 *, u8 *); +extern asmlinkage int gdbstub_read_word(const u8 *, u8 *); +extern asmlinkage int gdbstub_read_dword(const u8 *, u8 *); +extern asmlinkage int gdbstub_write_byte(u32, u8 *); +extern asmlinkage int gdbstub_write_word(u32, u8 *); +extern asmlinkage int gdbstub_write_dword(u32, u8 *); + +extern asmlinkage void gdbstub_read_byte_guard(void); +extern asmlinkage void gdbstub_read_byte_cont(void); +extern asmlinkage void gdbstub_read_word_guard(void); +extern asmlinkage void gdbstub_read_word_cont(void); +extern asmlinkage void gdbstub_read_dword_guard(void); +extern asmlinkage void gdbstub_read_dword_cont(void); +extern asmlinkage void gdbstub_write_byte_guard(void); +extern asmlinkage void gdbstub_write_byte_cont(void); +extern asmlinkage void gdbstub_write_word_guard(void); +extern asmlinkage void gdbstub_write_word_cont(void); +extern asmlinkage void gdbstub_write_dword_guard(void); +extern asmlinkage void gdbstub_write_dword_cont(void); + +extern u8 gdbstub_rx_buffer[PAGE_SIZE]; +extern u32 gdbstub_rx_inp; +extern u32 gdbstub_rx_outp; +extern u8 gdbstub_rx_overflow; +extern u8 gdbstub_busy; +extern u8 gdbstub_rx_unget; + +#ifdef CONFIG_GDBSTUB_DEBUGGING +extern void gdbstub_printk(const char *fmt, ...) + __attribute__((format(printf, 1, 2))); +#else +static inline __attribute__((format(printf, 1, 2))) +void gdbstub_printk(const char *fmt, ...) +{ +} +#endif + +#ifdef CONFIG_GDBSTUB_DEBUG_ENTRY +#define gdbstub_entry(FMT, ...) gdbstub_printk(FMT, ##__VA_ARGS__) +#else +#define gdbstub_entry(FMT, ...) ({ 0; }) +#endif + +#ifdef CONFIG_GDBSTUB_DEBUG_PROTOCOL +#define gdbstub_proto(FMT, ...) gdbstub_printk(FMT, ##__VA_ARGS__) +#else +#define gdbstub_proto(FMT, ...) ({ 0; }) +#endif + +#ifdef CONFIG_GDBSTUB_DEBUG_IO +#define gdbstub_io(FMT, ...) gdbstub_printk(FMT, ##__VA_ARGS__) +#else +#define gdbstub_io(FMT, ...) ({ 0; }) +#endif + +#ifdef CONFIG_GDBSTUB_DEBUG_BREAKPOINT +#define gdbstub_bkpt(FMT, ...) gdbstub_printk(FMT, ##__VA_ARGS__) +#else +#define gdbstub_bkpt(FMT, ...) ({ 0; }) +#endif + +#endif /* !__ASSEMBLY__ */ +#endif /* _ASM_GDB_STUB_H */ diff --git a/arch/mn10300/include/asm/hardirq.h b/arch/mn10300/include/asm/hardirq.h new file mode 100644 index 00000000000..54d95011767 --- /dev/null +++ b/arch/mn10300/include/asm/hardirq.h @@ -0,0 +1,48 @@ +/* MN10300 Hardware IRQ statistics and management + * + * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Modified by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_HARDIRQ_H +#define _ASM_HARDIRQ_H + +#include <linux/threads.h> +#include <linux/irq.h> +#include <asm/exceptions.h> + +/* assembly code in softirq.h is sensitive to the offsets of these fields */ +typedef struct { + unsigned int __softirq_pending; + unsigned long idle_timestamp; + unsigned int __nmi_count; /* arch dependent */ + unsigned int __irq_count; /* arch dependent */ +} ____cacheline_aligned irq_cpustat_t; + +#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */ + +extern void ack_bad_irq(int irq); + +/* + * manipulate stubs in the MN10300 CPU Trap/Interrupt Vector table + * - these should jump to __common_exception in entry.S unless there's a good + * reason to do otherwise (see trap_preinit() in traps.c) + */ +typedef void (*intr_stub_fnx)(struct pt_regs *regs, + enum exception_code intcode); + +/* + * manipulate pointers in the Exception table (see entry.S) + * - these are indexed by decoding the lower 24 bits of the TBR register + * - note that the MN103E010 doesn't always trap through the correct vector, + * but does always set the TBR correctly + */ +extern asmlinkage void set_excp_vector(enum exception_code code, + intr_stub_fnx handler); + +#endif /* _ASM_HARDIRQ_H */ diff --git a/arch/mn10300/include/asm/highmem.h b/arch/mn10300/include/asm/highmem.h new file mode 100644 index 00000000000..90f2abb04bf --- /dev/null +++ b/arch/mn10300/include/asm/highmem.h @@ -0,0 +1,116 @@ +/* MN10300 Virtual kernel memory mappings for high memory + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * - Derived from include/asm-i386/highmem.h + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_HIGHMEM_H +#define _ASM_HIGHMEM_H + +#ifdef __KERNEL__ + +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/highmem.h> +#include <asm/kmap_types.h> +#include <asm/pgtable.h> + +/* undef for production */ +#undef HIGHMEM_DEBUG + +/* declarations for highmem.c */ +extern unsigned long highstart_pfn, highend_pfn; + +extern pte_t *kmap_pte; +extern pgprot_t kmap_prot; +extern pte_t *pkmap_page_table; + +extern void __init kmap_init(void); + +/* + * Right now we initialize only a single pte table. It can be extended + * easily, subsequent pte tables have to be allocated in one physical + * chunk of RAM. + */ +#define PKMAP_BASE 0xfe000000UL +#define LAST_PKMAP 1024 +#define LAST_PKMAP_MASK (LAST_PKMAP - 1) +#define PKMAP_NR(virt) ((virt - PKMAP_BASE) >> PAGE_SHIFT) +#define PKMAP_ADDR(nr) (PKMAP_BASE + ((nr) << PAGE_SHIFT)) + +extern unsigned long kmap_high(struct page *page); +extern void kunmap_high(struct page *page); + +static inline unsigned long kmap(struct page *page) +{ + if (in_interrupt()) + BUG(); + if (page < highmem_start_page) + return page_address(page); + return kmap_high(page); +} + +static inline void kunmap(struct page *page) +{ + if (in_interrupt()) + BUG(); + if (page < highmem_start_page) + return; + kunmap_high(page); +} + +/* + * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap + * gives a more generic (and caching) interface. But kmap_atomic can + * be used in IRQ contexts, so in some (very limited) cases we need + * it. + */ +static inline unsigned long kmap_atomic(struct page *page, enum km_type type) +{ + enum fixed_addresses idx; + unsigned long vaddr; + + if (page < highmem_start_page) + return page_address(page); + + debug_kmap_atomic(type); + idx = type + KM_TYPE_NR * smp_processor_id(); + vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx); +#if HIGHMEM_DEBUG + if (!pte_none(*(kmap_pte - idx))) + BUG(); +#endif + set_pte(kmap_pte - idx, mk_pte(page, kmap_prot)); + __flush_tlb_one(vaddr); + + return vaddr; +} + +static inline void kunmap_atomic(unsigned long vaddr, enum km_type type) +{ +#if HIGHMEM_DEBUG + enum fixed_addresses idx = type + KM_TYPE_NR * smp_processor_id(); + + if (vaddr < FIXADDR_START) /* FIXME */ + return; + + if (vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx)) + BUG(); + + /* + * force other mappings to Oops if they'll try to access + * this pte without first remap it + */ + pte_clear(kmap_pte - idx); + __flush_tlb_one(vaddr); +#endif +} + +#endif /* __KERNEL__ */ + +#endif /* _ASM_HIGHMEM_H */ diff --git a/arch/mn10300/include/asm/hw_irq.h b/arch/mn10300/include/asm/hw_irq.h new file mode 100644 index 00000000000..70619901098 --- /dev/null +++ b/arch/mn10300/include/asm/hw_irq.h @@ -0,0 +1,14 @@ +/* MN10300 Hardware interrupt definitions + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_HW_IRQ_H +#define _ASM_HW_IRQ_H + +#endif /* _ASM_HW_IRQ_H */ diff --git a/arch/mn10300/include/asm/intctl-regs.h b/arch/mn10300/include/asm/intctl-regs.h new file mode 100644 index 00000000000..ba544c796c5 --- /dev/null +++ b/arch/mn10300/include/asm/intctl-regs.h @@ -0,0 +1,73 @@ +/* MN10300 On-board interrupt controller registers + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_INTCTL_REGS_H +#define _ASM_INTCTL_REGS_H + +#include <asm/cpu-regs.h> + +#ifdef __KERNEL__ + +/* interrupt controller registers */ +#define GxICR(X) __SYSREG(0xd4000000 + (X) * 4, u16) /* group irq ctrl regs */ + +#define IAGR __SYSREG(0xd4000100, u16) /* intr acceptance group reg */ +#define IAGR_GN 0x00fc /* group number register + * (documentation _has_ to be wrong) + */ + +#define EXTMD __SYSREG(0xd4000200, u16) /* external pin intr spec reg */ +#define GET_XIRQ_TRIGGER(X) ((EXTMD >> ((X) * 2)) & 3) + +#define SET_XIRQ_TRIGGER(X,Y) \ +do { \ + u16 x = EXTMD; \ + x &= ~(3 << ((X) * 2)); \ + x |= ((Y) & 3) << ((X) * 2); \ + EXTMD = x; \ +} while (0) + +#define XIRQ_TRIGGER_LOWLEVEL 0 +#define XIRQ_TRIGGER_HILEVEL 1 +#define XIRQ_TRIGGER_NEGEDGE 2 +#define XIRQ_TRIGGER_POSEDGE 3 + +/* non-maskable interrupt control */ +#define NMIIRQ 0 +#define NMICR GxICR(NMIIRQ) /* NMI control register */ +#define NMICR_NMIF 0x0001 /* NMI pin interrupt flag */ +#define NMICR_WDIF 0x0002 /* watchdog timer overflow flag */ +#define NMICR_ABUSERR 0x0008 /* async bus error flag */ + +/* maskable interrupt control */ +#define GxICR_DETECT 0x0001 /* interrupt detect flag */ +#define GxICR_REQUEST 0x0010 /* interrupt request flag */ +#define GxICR_ENABLE 0x0100 /* interrupt enable flag */ +#define GxICR_LEVEL 0x7000 /* interrupt priority level */ +#define GxICR_LEVEL_0 0x0000 /* - level 0 */ +#define GxICR_LEVEL_1 0x1000 /* - level 1 */ +#define GxICR_LEVEL_2 0x2000 /* - level 2 */ +#define GxICR_LEVEL_3 0x3000 /* - level 3 */ +#define GxICR_LEVEL_4 0x4000 /* - level 4 */ +#define GxICR_LEVEL_5 0x5000 /* - level 5 */ +#define GxICR_LEVEL_6 0x6000 /* - level 6 */ +#define GxICR_LEVEL_SHIFT 12 + +#ifndef __ASSEMBLY__ +extern void set_intr_level(int irq, u16 level); +extern void set_intr_postackable(int irq); +#endif + +/* external interrupts */ +#define XIRQxICR(X) GxICR((X)) /* external interrupt control regs */ + +#endif /* __KERNEL__ */ + +#endif /* _ASM_INTCTL_REGS_H */ diff --git a/arch/mn10300/include/asm/io.h b/arch/mn10300/include/asm/io.h new file mode 100644 index 00000000000..c1a4119e649 --- /dev/null +++ b/arch/mn10300/include/asm/io.h @@ -0,0 +1,301 @@ +/* MN10300 I/O port emulation and memory-mapped I/O + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_IO_H +#define _ASM_IO_H + +#include <asm/page.h> /* I/O is all done through memory accesses */ +#include <asm/cpu-regs.h> +#include <asm/cacheflush.h> + +#define mmiowb() do {} while (0) + +/*****************************************************************************/ +/* + * readX/writeX() are used to access memory mapped devices. On some + * architectures the memory mapped IO stuff needs to be accessed + * differently. On the x86 architecture, we just read/write the + * memory location directly. + */ +static inline u8 readb(const volatile void __iomem *addr) +{ + return *(const volatile u8 *) addr; +} + +static inline u16 readw(const volatile void __iomem *addr) +{ + return *(const volatile u16 *) addr; +} + +static inline u32 readl(const volatile void __iomem *addr) +{ + return *(const volatile u32 *) addr; +} + +#define __raw_readb readb +#define __raw_readw readw +#define __raw_readl readl + +#define readb_relaxed readb +#define readw_relaxed readw +#define readl_relaxed readl + +static inline void writeb(u8 b, volatile void __iomem *addr) +{ + *(volatile u8 *) addr = b; +} + +static inline void writew(u16 b, volatile void __iomem *addr) +{ + *(volatile u16 *) addr = b; +} + +static inline void writel(u32 b, volatile void __iomem *addr) +{ + *(volatile u32 *) addr = b; +} + +#define __raw_writeb writeb +#define __raw_writew writew +#define __raw_writel writel + +/*****************************************************************************/ +/* + * traditional input/output functions + */ +static inline u8 inb_local(unsigned long addr) +{ + return readb((volatile void __iomem *) addr); +} + +static inline void outb_local(u8 b, unsigned long addr) +{ + return writeb(b, (volatile void __iomem *) addr); +} + +static inline u8 inb(unsigned long addr) +{ + return readb((volatile void __iomem *) addr); +} + +static inline u16 inw(unsigned long addr) +{ + return readw((volatile void __iomem *) addr); +} + +static inline u32 inl(unsigned long addr) +{ + return readl((volatile void __iomem *) addr); +} + +static inline void outb(u8 b, unsigned long addr) +{ + return writeb(b, (volatile void __iomem *) addr); +} + +static inline void outw(u16 b, unsigned long addr) +{ + return writew(b, (volatile void __iomem *) addr); +} + +static inline void outl(u32 b, unsigned long addr) +{ + return writel(b, (volatile void __iomem *) addr); +} + +#define inb_p(addr) inb(addr) +#define inw_p(addr) inw(addr) +#define inl_p(addr) inl(addr) +#define outb_p(x, addr) outb((x), (addr)) +#define outw_p(x, addr) outw((x), (addr)) +#define outl_p(x, addr) outl((x), (addr)) + +static inline void insb(unsigned long addr, void *buffer, int count) +{ + if (count) { + u8 *buf = buffer; + do { + u8 x = inb(addr); + *buf++ = x; + } while (--count); + } +} + +static inline void insw(unsigned long addr, void *buffer, int count) +{ + if (count) { + u16 *buf = buffer; + do { + u16 x = inw(addr); + *buf++ = x; + } while (--count); + } +} + +static inline void insl(unsigned long addr, void *buffer, int count) +{ + if (count) { + u32 *buf = buffer; + do { + u32 x = inl(addr); + *buf++ = x; + } while (--count); + } +} + +static inline void outsb(unsigned long addr, const void *buffer, int count) +{ + if (count) { + const u8 *buf = buffer; + do { + outb(*buf++, addr); + } while (--count); + } +} + +static inline void outsw(unsigned long addr, const void *buffer, int count) +{ + if (count) { + const u16 *buf = buffer; + do { + outw(*buf++, addr); + } while (--count); + } +} + +extern void __outsl(unsigned long addr, const void *buffer, int count); +static inline void outsl(unsigned long addr, const void *buffer, int count) +{ + if ((unsigned long) buffer & 0x3) + return __outsl(addr, buffer, count); + + if (count) { + const u32 *buf = buffer; + do { + outl(*buf++, addr); + } while (--count); + } +} + +#define ioread8(addr) readb(addr) +#define ioread16(addr) readw(addr) +#define ioread32(addr) readl(addr) + +#define iowrite8(v, addr) writeb((v), (addr)) +#define iowrite16(v, addr) writew((v), (addr)) +#define iowrite32(v, addr) writel((v), (addr)) + +#define ioread8_rep(p, dst, count) \ + insb((unsigned long) (p), (dst), (count)) +#define ioread16_rep(p, dst, count) \ + insw((unsigned long) (p), (dst), (count)) +#define ioread32_rep(p, dst, count) \ + insl((unsigned long) (p), (dst), (count)) + +#define iowrite8_rep(p, src, count) \ + outsb((unsigned long) (p), (src), (count)) +#define iowrite16_rep(p, src, count) \ + outsw((unsigned long) (p), (src), (count)) +#define iowrite32_rep(p, src, count) \ + outsl((unsigned long) (p), (src), (count)) + + +#define IO_SPACE_LIMIT 0xffffffff + +#ifdef __KERNEL__ + +#include <linux/vmalloc.h> +#define __io_virt(x) ((void *) (x)) + +/* Create a virtual mapping cookie for a PCI BAR (memory or IO) */ +struct pci_dev; +extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max); +static inline void pci_iounmap(struct pci_dev *dev, void __iomem *p) +{ +} + +/* + * Change virtual addresses to physical addresses and vv. + * These are pretty trivial + */ +static inline unsigned long virt_to_phys(volatile void *address) +{ + return __pa(address); +} + +static inline void *phys_to_virt(unsigned long address) +{ + return __va(address); +} + +/* + * Change "struct page" to physical address. + */ +static inline void *__ioremap(unsigned long offset, unsigned long size, + unsigned long flags) +{ + return (void *) offset; +} + +static inline void *ioremap(unsigned long offset, unsigned long size) +{ + return (void *) offset; +} + +/* + * This one maps high address device memory and turns off caching for that + * area. it's useful if some control registers are in such an area and write + * combining or read caching is not desirable: + */ +static inline void *ioremap_nocache(unsigned long offset, unsigned long size) +{ + return (void *) (offset | 0x20000000); +} + +#define ioremap_wc ioremap_nocache + +static inline void iounmap(void *addr) +{ +} + +static inline void __iomem *ioport_map(unsigned long port, unsigned int nr) +{ + return (void __iomem *) port; +} + +static inline void ioport_unmap(void __iomem *p) +{ +} + +#define xlate_dev_kmem_ptr(p) ((void *) (p)) +#define xlate_dev_mem_ptr(p) ((void *) (p)) + +/* + * PCI bus iomem addresses must be in the region 0x80000000-0x9fffffff + */ +static inline unsigned long virt_to_bus(volatile void *address) +{ + return ((unsigned long) address) & ~0x20000000; +} + +static inline void *bus_to_virt(unsigned long address) +{ + return (void *) address; +} + +#define page_to_bus page_to_phys + +#define memset_io(a, b, c) memset(__io_virt(a), (b), (c)) +#define memcpy_fromio(a, b, c) memcpy((a), __io_virt(b), (c)) +#define memcpy_toio(a, b, c) memcpy(__io_virt(a), (b), (c)) + +#endif /* __KERNEL__ */ + +#endif /* _ASM_IO_H */ diff --git a/arch/mn10300/include/asm/ioctl.h b/arch/mn10300/include/asm/ioctl.h new file mode 100644 index 00000000000..b279fe06dfe --- /dev/null +++ b/arch/mn10300/include/asm/ioctl.h @@ -0,0 +1 @@ +#include <asm-generic/ioctl.h> diff --git a/arch/mn10300/include/asm/ioctls.h b/arch/mn10300/include/asm/ioctls.h new file mode 100644 index 00000000000..dcbfb452974 --- /dev/null +++ b/arch/mn10300/include/asm/ioctls.h @@ -0,0 +1,88 @@ +#ifndef _ASM_IOCTLS_H +#define _ASM_IOCTLS_H + +#include <asm/ioctl.h> + +/* 0x54 is just a magic number to make these relatively unique ('T') */ + +#define TCGETS 0x5401 +#define TCSETS 0x5402 +#define TCSETSW 0x5403 +#define TCSETSF 0x5404 +#define TCGETA 0x5405 +#define TCSETA 0x5406 +#define TCSETAW 0x5407 +#define TCSETAF 0x5408 +#define TCSBRK 0x5409 +#define TCXONC 0x540A +#define TCFLSH 0x540B +#define TIOCEXCL 0x540C +#define TIOCNXCL 0x540D +#define TIOCSCTTY 0x540E +#define TIOCGPGRP 0x540F +#define TIOCSPGRP 0x5410 +#define TIOCOUTQ 0x5411 +#define TIOCSTI 0x5412 +#define TIOCGWINSZ 0x5413 +#define TIOCSWINSZ 0x5414 +#define TIOCMGET 0x5415 +#define TIOCMBIS 0x5416 +#define TIOCMBIC 0x5417 +#define TIOCMSET 0x5418 +#define TIOCGSOFTCAR 0x5419 +#define TIOCSSOFTCAR 0x541A +#define FIONREAD 0x541B +#define TIOCINQ FIONREAD +#define TIOCLINUX 0x541C +#define TIOCCONS 0x541D +#define TIOCGSERIAL 0x541E +#define TIOCSSERIAL 0x541F +#define TIOCPKT 0x5420 +#define FIONBIO 0x5421 +#define TIOCNOTTY 0x5422 +#define TIOCSETD 0x5423 +#define TIOCGETD 0x5424 +#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */ +/* #define TIOCTTYGSTRUCT 0x5426 - Former debugging-only ioctl */ +#define TIOCSBRK 0x5427 /* BSD compatibility */ +#define TIOCCBRK 0x5428 /* BSD compatibility */ +#define TIOCGSID 0x5429 /* Return the session ID of FD */ +#define TCGETS2 _IOR('T', 0x2A, struct termios2) +#define TCSETS2 _IOW('T', 0x2B, struct termios2) +#define TCSETSW2 _IOW('T', 0x2C, struct termios2) +#define TCSETSF2 _IOW('T', 0x2D, struct termios2) +#define TIOCGPTN _IOR('T', 0x30, unsigned int) /* Get Pty Number + * (of pty-mux device) */ +#define TIOCSPTLCK _IOW('T', 0x31, int) /* Lock/unlock Pty */ + +#define FIONCLEX 0x5450 +#define FIOCLEX 0x5451 +#define FIOASYNC 0x5452 +#define TIOCSERCONFIG 0x5453 +#define TIOCSERGWILD 0x5454 +#define TIOCSERSWILD 0x5455 +#define TIOCGLCKTRMIOS 0x5456 +#define TIOCSLCKTRMIOS 0x5457 +#define TIOCSERGSTRUCT 0x5458 /* For debugging only */ +#define TIOCSERGETLSR 0x5459 /* Get line status register */ +#define TIOCSERGETMULTI 0x545A /* Get multiport config */ +#define TIOCSERSETMULTI 0x545B /* Set multiport config */ + +#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */ +#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ +#define TIOCGHAYESESP 0x545E /* Get Hayes ESP configuration */ +#define TIOCSHAYESESP 0x545F /* Set Hayes ESP configuration */ +#define FIOQSIZE 0x5460 + +/* Used for packet mode */ +#define TIOCPKT_DATA 0 +#define TIOCPKT_FLUSHREAD 1 +#define TIOCPKT_FLUSHWRITE 2 +#define TIOCPKT_STOP 4 +#define TIOCPKT_START 8 +#define TIOCPKT_NOSTOP 16 +#define TIOCPKT_DOSTOP 32 + +#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ + +#endif /* _ASM_IOCTLS_H */ diff --git a/arch/mn10300/include/asm/ipc.h b/arch/mn10300/include/asm/ipc.h new file mode 100644 index 00000000000..a46e3d9c2a3 --- /dev/null +++ b/arch/mn10300/include/asm/ipc.h @@ -0,0 +1 @@ +#include <asm-generic/ipc.h> diff --git a/arch/mn10300/include/asm/ipcbuf.h b/arch/mn10300/include/asm/ipcbuf.h new file mode 100644 index 00000000000..f6f63d44827 --- /dev/null +++ b/arch/mn10300/include/asm/ipcbuf.h @@ -0,0 +1,29 @@ +#ifndef _ASM_IPCBUF_H +#define _ASM_IPCBUF_H + +/* + * The ipc64_perm structure for MN10300 architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 32-bit mode_t and seq + * - 2 miscellaneous 32-bit values + */ + +struct ipc64_perm +{ + __kernel_key_t key; + __kernel_uid32_t uid; + __kernel_gid32_t gid; + __kernel_uid32_t cuid; + __kernel_gid32_t cgid; + __kernel_mode_t mode; + unsigned short __pad1; + unsigned short seq; + unsigned short __pad2; + unsigned long __unused1; + unsigned long __unused2; +}; + +#endif /* _ASM_IPCBUF_H */ diff --git a/arch/mn10300/include/asm/irq.h b/arch/mn10300/include/asm/irq.h new file mode 100644 index 00000000000..25c045d16d1 --- /dev/null +++ b/arch/mn10300/include/asm/irq.h @@ -0,0 +1,32 @@ +/* MN10300 Hardware interrupt definitions + * + * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Modified by David Howells (dhowells@redhat.com) + * - Derived from include/asm-i386/irq.h: + * - (C) 1992, 1993 Linus Torvalds, (C) 1997 Ingo Molnar + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_IRQ_H +#define _ASM_IRQ_H + +#include <asm/intctl-regs.h> +#include <asm/reset-regs.h> +#include <proc/irq.h> + +/* this number is used when no interrupt has been assigned */ +#define NO_IRQ INT_MAX + +/* hardware irq numbers */ +#define NR_IRQS GxICR_NUM_IRQS + +/* external hardware irq numbers */ +#define NR_XIRQS GxICR_NUM_XIRQS + +#define irq_canonicalize(IRQ) (IRQ) + +#endif /* _ASM_IRQ_H */ diff --git a/arch/mn10300/include/asm/irq_regs.h b/arch/mn10300/include/asm/irq_regs.h new file mode 100644 index 00000000000..a848cd232eb --- /dev/null +++ b/arch/mn10300/include/asm/irq_regs.h @@ -0,0 +1,24 @@ +/* MN10300 IRQ registers pointer definition + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_IRQ_REGS_H +#define _ASM_IRQ_REGS_H + +/* + * Per-cpu current frame pointer - the location of the last exception frame on + * the stack + */ +#define ARCH_HAS_OWN_IRQ_REGS + +#ifndef __ASSEMBLY__ +#define get_irq_regs() (__frame) +#endif + +#endif /* _ASM_IRQ_REGS_H */ diff --git a/arch/mn10300/include/asm/kdebug.h b/arch/mn10300/include/asm/kdebug.h new file mode 100644 index 00000000000..0f47e112190 --- /dev/null +++ b/arch/mn10300/include/asm/kdebug.h @@ -0,0 +1,22 @@ +/* MN10300 In-kernel death knells + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _ASM_KDEBUG_H +#define _ASM_KDEBUG_H + +/* Grossly misnamed. */ +enum die_val { + DIE_OOPS = 1, + DIE_BREAKPOINT, + DIE_GPF, +}; + +#endif /* _ASM_KDEBUG_H */ diff --git a/arch/mn10300/include/asm/kmap_types.h b/arch/mn10300/include/asm/kmap_types.h new file mode 100644 index 00000000000..3398f9f3560 --- /dev/null +++ b/arch/mn10300/include/asm/kmap_types.h @@ -0,0 +1,31 @@ +/* MN10300 kmap_atomic() slot IDs + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_KMAP_TYPES_H +#define _ASM_KMAP_TYPES_H + +enum km_type { + KM_BOUNCE_READ, + KM_SKB_SUNRPC_DATA, + KM_SKB_DATA_SOFTIRQ, + KM_USER0, + KM_USER1, + KM_BIO_SRC_IRQ, + KM_BIO_DST_IRQ, + KM_PTE0, + KM_PTE1, + KM_IRQ0, + KM_IRQ1, + KM_SOFTIRQ0, + KM_SOFTIRQ1, + KM_TYPE_NR +}; + +#endif /* _ASM_KMAP_TYPES_H */ diff --git a/arch/mn10300/include/asm/kprobes.h b/arch/mn10300/include/asm/kprobes.h new file mode 100644 index 00000000000..c800b590183 --- /dev/null +++ b/arch/mn10300/include/asm/kprobes.h @@ -0,0 +1,50 @@ +/* MN10300 Kernel Probes support + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by Mark Salter (msalter@redhat.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public Licence as published by + * the Free Software Foundation; either version 2 of the Licence, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public Licence for more details. + * + * You should have received a copy of the GNU General Public Licence + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ +#ifndef _ASM_KPROBES_H +#define _ASM_KPROBES_H + +#include <linux/types.h> +#include <linux/ptrace.h> + +struct kprobe; + +typedef unsigned char kprobe_opcode_t; +#define BREAKPOINT_INSTRUCTION 0xff +#define MAX_INSN_SIZE 8 +#define MAX_STACK_SIZE 128 + +/* Architecture specific copy of original instruction */ +struct arch_specific_insn { + /* copy of original instruction + */ + kprobe_opcode_t insn[MAX_INSN_SIZE]; +}; + +extern const int kretprobe_blacklist_size; + +extern int kprobe_exceptions_notify(struct notifier_block *self, + unsigned long val, void *data); + +#define flush_insn_slot(p) do {} while (0) + +extern void arch_remove_kprobe(struct kprobe *p); + +#endif /* _ASM_KPROBES_H */ diff --git a/arch/mn10300/include/asm/linkage.h b/arch/mn10300/include/asm/linkage.h new file mode 100644 index 00000000000..dda3002a5df --- /dev/null +++ b/arch/mn10300/include/asm/linkage.h @@ -0,0 +1,20 @@ +/* MN10300 Linkage and calling-convention overrides + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_LINKAGE_H +#define _ASM_LINKAGE_H + +/* don't override anything */ +#define asmlinkage + +#define __ALIGN .align 4,0xcb +#define __ALIGN_STR ".align 4,0xcb" + +#endif diff --git a/arch/mn10300/include/asm/local.h b/arch/mn10300/include/asm/local.h new file mode 100644 index 00000000000..c11c530f74d --- /dev/null +++ b/arch/mn10300/include/asm/local.h @@ -0,0 +1 @@ +#include <asm-generic/local.h> diff --git a/arch/mn10300/include/asm/mc146818rtc.h b/arch/mn10300/include/asm/mc146818rtc.h new file mode 100644 index 00000000000..df6bc6e0e8c --- /dev/null +++ b/arch/mn10300/include/asm/mc146818rtc.h @@ -0,0 +1 @@ +#include <asm/rtc-regs.h> diff --git a/arch/mn10300/include/asm/mman.h b/arch/mn10300/include/asm/mman.h new file mode 100644 index 00000000000..b7986b65add --- /dev/null +++ b/arch/mn10300/include/asm/mman.h @@ -0,0 +1,28 @@ +/* MN10300 Constants for mmap and co. + * + * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * - Derived from asm-x86/mman.h + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_MMAN_H +#define _ASM_MMAN_H + +#include <asm-generic/mman.h> + +#define MAP_GROWSDOWN 0x0100 /* stack-like segment */ +#define MAP_DENYWRITE 0x0800 /* ETXTBSY */ +#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */ +#define MAP_LOCKED 0x2000 /* pages are locked */ +#define MAP_NORESERVE 0x4000 /* don't check for reservations */ +#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */ +#define MAP_NONBLOCK 0x10000 /* do not block on IO */ + +#define MCL_CURRENT 1 /* lock all current mappings */ +#define MCL_FUTURE 2 /* lock all future mappings */ + +#endif /* _ASM_MMAN_H */ diff --git a/arch/mn10300/include/asm/mmu.h b/arch/mn10300/include/asm/mmu.h new file mode 100644 index 00000000000..2d2d097e730 --- /dev/null +++ b/arch/mn10300/include/asm/mmu.h @@ -0,0 +1,19 @@ +/* MN10300 Memory management context + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * - Derived from include/asm-frv/mmu.h + */ + +#ifndef _ASM_MMU_H +#define _ASM_MMU_H + +/* + * MMU context + */ +typedef struct { + unsigned long tlbpid[NR_CPUS]; /* TLB PID for this process on + * each CPU */ +} mm_context_t; + +#endif /* _ASM_MMU_H */ diff --git a/arch/mn10300/include/asm/mmu_context.h b/arch/mn10300/include/asm/mmu_context.h new file mode 100644 index 00000000000..a9e2e34f69b --- /dev/null +++ b/arch/mn10300/include/asm/mmu_context.h @@ -0,0 +1,138 @@ +/* MN10300 MMU context management + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Modified by David Howells (dhowells@redhat.com) + * - Derived from include/asm-m32r/mmu_context.h + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + * + * + * This implements an algorithm to provide TLB PID mappings to provide + * selective access to the TLB for processes, thus reducing the number of TLB + * flushes required. + * + * Note, however, that the M32R algorithm is technically broken as it does not + * handle version wrap-around, and could, theoretically, have a problem with a + * very long lived program that sleeps long enough for the version number to + * wrap all the way around so that its TLB mappings appear valid once again. + */ +#ifndef _ASM_MMU_CONTEXT_H +#define _ASM_MMU_CONTEXT_H + +#include <asm/atomic.h> +#include <asm/pgalloc.h> +#include <asm/tlbflush.h> +#include <asm-generic/mm_hooks.h> + +#define MMU_CONTEXT_TLBPID_MASK 0x000000ffUL +#define MMU_CONTEXT_VERSION_MASK 0xffffff00UL +#define MMU_CONTEXT_FIRST_VERSION 0x00000100UL +#define MMU_NO_CONTEXT 0x00000000UL + +extern unsigned long mmu_context_cache[NR_CPUS]; +#define mm_context(mm) (mm->context.tlbpid[smp_processor_id()]) + +#define enter_lazy_tlb(mm, tsk) do {} while (0) + +#ifdef CONFIG_SMP +#define cpu_ran_vm(cpu, task) \ + cpu_set((cpu), (task)->cpu_vm_mask) +#define cpu_maybe_ran_vm(cpu, task) \ + cpu_test_and_set((cpu), (task)->cpu_vm_mask) +#else +#define cpu_ran_vm(cpu, task) do {} while (0) +#define cpu_maybe_ran_vm(cpu, task) true +#endif /* CONFIG_SMP */ + +/* + * allocate an MMU context + */ +static inline unsigned long allocate_mmu_context(struct mm_struct *mm) +{ + unsigned long *pmc = &mmu_context_cache[smp_processor_id()]; + unsigned long mc = ++(*pmc); + + if (!(mc & MMU_CONTEXT_TLBPID_MASK)) { + /* we exhausted the TLB PIDs of this version on this CPU, so we + * flush this CPU's TLB in its entirety and start new cycle */ + flush_tlb_all(); + + /* fix the TLB version if needed (we avoid version #0 so as to + * distingush MMU_NO_CONTEXT) */ + if (!mc) + *pmc = mc = MMU_CONTEXT_FIRST_VERSION; + } + mm_context(mm) = mc; + return mc; +} + +/* + * get an MMU context if one is needed + */ +static inline unsigned long get_mmu_context(struct mm_struct *mm) +{ + unsigned long mc = MMU_NO_CONTEXT, cache; + + if (mm) { + cache = mmu_context_cache[smp_processor_id()]; + mc = mm_context(mm); + + /* if we have an old version of the context, replace it */ + if ((mc ^ cache) & MMU_CONTEXT_VERSION_MASK) + mc = allocate_mmu_context(mm); + } + return mc; +} + +/* + * initialise the context related info for a new mm_struct instance + */ +static inline int init_new_context(struct task_struct *tsk, + struct mm_struct *mm) +{ + int num_cpus = NR_CPUS, i; + + for (i = 0; i < num_cpus; i++) + mm->context.tlbpid[i] = MMU_NO_CONTEXT; + return 0; +} + +/* + * destroy context related info for an mm_struct that is about to be put to + * rest + */ +#define destroy_context(mm) do { } while (0) + +/* + * after we have set current->mm to a new value, this activates the context for + * the new mm so we see the new mappings. + */ +static inline void activate_context(struct mm_struct *mm, int cpu) +{ + PIDR = get_mmu_context(mm) & MMU_CONTEXT_TLBPID_MASK; +} + +/* + * change between virtual memory sets + */ +static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, + struct task_struct *tsk) +{ + int cpu = smp_processor_id(); + + if (prev != next) { + cpu_ran_vm(cpu, next); + activate_context(next, cpu); + PTBR = (unsigned long) next->pgd; + } else if (!cpu_maybe_ran_vm(cpu, next)) { + activate_context(next, cpu); + } +} + +#define deactivate_mm(tsk, mm) do {} while (0) +#define activate_mm(prev, next) switch_mm((prev), (next), NULL) + +#endif /* _ASM_MMU_CONTEXT_H */ diff --git a/arch/mn10300/include/asm/module.h b/arch/mn10300/include/asm/module.h new file mode 100644 index 00000000000..5d7057d0149 --- /dev/null +++ b/arch/mn10300/include/asm/module.h @@ -0,0 +1,27 @@ +/* MN10300 Arch-specific module definitions + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by Mark Salter (msalter@redhat.com) + * Derived from include/asm-i386/module.h + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_MODULE_H +#define _ASM_MODULE_H + +struct mod_arch_specific { +}; + +#define Elf_Shdr Elf32_Shdr +#define Elf_Sym Elf32_Sym +#define Elf_Ehdr Elf32_Ehdr + +/* + * Include the MN10300 architecture version. + */ +#define MODULE_ARCH_VERMAGIC __stringify(PROCESSOR_MODEL_NAME) " " + +#endif /* _ASM_MODULE_H */ diff --git a/arch/mn10300/include/asm/msgbuf.h b/arch/mn10300/include/asm/msgbuf.h new file mode 100644 index 00000000000..8b602450cc4 --- /dev/null +++ b/arch/mn10300/include/asm/msgbuf.h @@ -0,0 +1,31 @@ +#ifndef _ASM_MSGBUF_H +#define _ASM_MSGBUF_H + +/* + * The msqid64_ds structure for MN10300 architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct msqid64_ds { + struct ipc64_perm msg_perm; + __kernel_time_t msg_stime; /* last msgsnd time */ + unsigned long __unused1; + __kernel_time_t msg_rtime; /* last msgrcv time */ + unsigned long __unused2; + __kernel_time_t msg_ctime; /* last change time */ + unsigned long __unused3; + unsigned long msg_cbytes; /* current number of bytes on queue */ + unsigned long msg_qnum; /* number of messages in queue */ + unsigned long msg_qbytes; /* max number of bytes on queue */ + __kernel_pid_t msg_lspid; /* pid of last msgsnd */ + __kernel_pid_t msg_lrpid; /* last receive pid */ + unsigned long __unused4; + unsigned long __unused5; +}; + +#endif /* _ASM_MSGBUF_H */ diff --git a/arch/mn10300/include/asm/mutex.h b/arch/mn10300/include/asm/mutex.h new file mode 100644 index 00000000000..84f5490c6fb --- /dev/null +++ b/arch/mn10300/include/asm/mutex.h @@ -0,0 +1,16 @@ +/* MN10300 Mutex fastpath + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + * + * + * TODO: implement optimized primitives instead, or leave the generic + * implementation in place, or pick the atomic_xchg() based generic + * implementation. (see asm-generic/mutex-xchg.h for details) + */ +#include <asm-generic/mutex-null.h> diff --git a/arch/mn10300/include/asm/nmi.h b/arch/mn10300/include/asm/nmi.h new file mode 100644 index 00000000000..f3671cbbc11 --- /dev/null +++ b/arch/mn10300/include/asm/nmi.h @@ -0,0 +1,14 @@ +/* MN10300 NMI handling + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_NMI_H +#define _ASM_NMI_H + +#endif /* _ASM_NMI_H */ diff --git a/arch/mn10300/include/asm/page.h b/arch/mn10300/include/asm/page.h new file mode 100644 index 00000000000..8288e124165 --- /dev/null +++ b/arch/mn10300/include/asm/page.h @@ -0,0 +1,128 @@ +/* MN10300 Page table definitions + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_PAGE_H +#define _ASM_PAGE_H + +/* PAGE_SHIFT determines the page size */ +#define PAGE_SHIFT 12 + +#ifndef __ASSEMBLY__ +#define PAGE_SIZE (1UL << PAGE_SHIFT) +#define PAGE_MASK (~(PAGE_SIZE - 1)) +#else +#define PAGE_SIZE +(1 << PAGE_SHIFT) /* unary plus marks an + * immediate val not an addr */ +#define PAGE_MASK +(~(PAGE_SIZE - 1)) +#endif + +#ifdef __KERNEL__ +#ifndef __ASSEMBLY__ + +#define clear_page(page) memset((void *)(page), 0, PAGE_SIZE) +#define copy_page(to, from) memcpy((void *)(to), (void *)(from), PAGE_SIZE) + +#define clear_user_page(addr, vaddr, page) clear_page(addr) +#define copy_user_page(vto, vfrom, vaddr, to) copy_page(vto, vfrom) + +/* + * These are used to make use of C type-checking.. + */ +typedef struct { unsigned long pte; } pte_t; +typedef struct { unsigned long pgd; } pgd_t; +typedef struct { unsigned long pgprot; } pgprot_t; +typedef struct page *pgtable_t; + +#define PTE_MASK PAGE_MASK +#define HPAGE_SHIFT 22 + +#ifdef CONFIG_HUGETLB_PAGE +#define HPAGE_SIZE ((1UL) << HPAGE_SHIFT) +#define HPAGE_MASK (~(HPAGE_SIZE - 1)) +#define HUGETLB_PAGE_ORDER (HPAGE_SHIFT - PAGE_SHIFT) +#endif + +#define pte_val(x) ((x).pte) +#define pgd_val(x) ((x).pgd) +#define pgprot_val(x) ((x).pgprot) + +#define __pte(x) ((pte_t) { (x) }) +#define __pgd(x) ((pgd_t) { (x) }) +#define __pgprot(x) ((pgprot_t) { (x) }) + +#include <asm-generic/pgtable-nopmd.h> + +#endif /* !__ASSEMBLY__ */ + +/* + * This handles the memory map.. We could make this a config + * option, but too many people screw it up, and too few need + * it. + * + * A __PAGE_OFFSET of 0xC0000000 means that the kernel has + * a virtual address space of one gigabyte, which limits the + * amount of physical memory you can use to about 950MB. + */ + +#ifndef __ASSEMBLY__ + +/* Pure 2^n version of get_order */ +static inline int get_order(unsigned long size) __attribute__((const)); +static inline int get_order(unsigned long size) +{ + int order; + + size = (size - 1) >> (PAGE_SHIFT - 1); + order = -1; + do { + size >>= 1; + order++; + } while (size); + return order; +} + +#endif /* __ASSEMBLY__ */ + +#include <asm/page_offset.h> + +#define __PAGE_OFFSET (PAGE_OFFSET_RAW) +#define PAGE_OFFSET ((unsigned long) __PAGE_OFFSET) + +/* + * main RAM and kernel working space are coincident at 0x90000000, but to make + * life more interesting, there's also an uncached virtual shadow at 0xb0000000 + * - these mappings are fixed in the MMU + */ +#define __pfn_disp (CONFIG_KERNEL_RAM_BASE_ADDRESS >> PAGE_SHIFT) + +#define __pa(x) ((unsigned long)(x)) +#define __va(x) ((void *)(unsigned long)(x)) +#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT) +#define pfn_to_page(pfn) (mem_map + ((pfn) - __pfn_disp)) +#define page_to_pfn(page) ((unsigned long)((page) - mem_map) + __pfn_disp) + +#define pfn_valid(pfn) \ +({ \ + unsigned long __pfn = (pfn) - __pfn_disp; \ + __pfn < max_mapnr; \ +}) + +#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT) +#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT) +#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT) + +#define VM_DATA_DEFAULT_FLAGS \ + (VM_READ | VM_WRITE | \ + ((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0) | \ + VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) + +#endif /* __KERNEL__ */ + +#endif /* _ASM_PAGE_H */ diff --git a/arch/mn10300/include/asm/page_offset.h b/arch/mn10300/include/asm/page_offset.h new file mode 100644 index 00000000000..8eb5b16ad86 --- /dev/null +++ b/arch/mn10300/include/asm/page_offset.h @@ -0,0 +1,11 @@ +/* MN10300 Kernel base address + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + */ +#ifndef _ASM_PAGE_OFFSET_H +#define _ASM_PAGE_OFFSET_H + +#define PAGE_OFFSET_RAW CONFIG_KERNEL_RAM_BASE_ADDRESS + +#endif diff --git a/arch/mn10300/include/asm/param.h b/arch/mn10300/include/asm/param.h new file mode 100644 index 00000000000..789b1df41fc --- /dev/null +++ b/arch/mn10300/include/asm/param.h @@ -0,0 +1,34 @@ +/* MN10300 Kernel parameters + * + * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_PARAM_H +#define _ASM_PARAM_H + +#ifdef __KERNEL__ +#define HZ CONFIG_HZ /* Internal kernel timer frequency */ +#define USER_HZ 100 /* .. some user interfaces are in + * "ticks" */ +#define CLOCKS_PER_SEC (USER_HZ) /* like times() */ +#endif + +#ifndef HZ +#define HZ 100 +#endif + +#define EXEC_PAGESIZE 4096 + +#ifndef NOGROUP +#define NOGROUP (-1) +#endif + +#define MAXHOSTNAMELEN 64 /* max length of hostname */ +#define COMMAND_LINE_SIZE 256 + +#endif /* _ASM_PARAM_H */ diff --git a/arch/mn10300/include/asm/pci.h b/arch/mn10300/include/asm/pci.h new file mode 100644 index 00000000000..0517b45313d --- /dev/null +++ b/arch/mn10300/include/asm/pci.h @@ -0,0 +1,129 @@ +/* MN10300 PCI definitions + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_PCI_H +#define _ASM_PCI_H + +#ifdef __KERNEL__ +#include <linux/mm.h> /* for struct page */ + +#if 0 +#define __pcbdebug(FMT, ADDR, ...) \ + printk(KERN_DEBUG "PCIBRIDGE[%08x]: "FMT"\n", \ + (u32)(ADDR), ##__VA_ARGS__) + +#define __pcidebug(FMT, BUS, DEVFN, WHERE,...) \ +do { \ + printk(KERN_DEBUG "PCI[%02x:%02x.%x + %02x]: "FMT"\n", \ + (BUS)->number, \ + PCI_SLOT(DEVFN), \ + PCI_FUNC(DEVFN), \ + (u32)(WHERE), ##__VA_ARGS__); \ +} while (0) + +#else +#define __pcbdebug(FMT, ADDR, ...) do {} while (0) +#define __pcidebug(FMT, BUS, DEVFN, WHERE, ...) do {} while (0) +#endif + +/* Can be used to override the logic in pci_scan_bus for skipping + * already-configured bus numbers - to be used for buggy BIOSes or + * architectures with incomplete PCI setup by the loader */ + +#ifdef CONFIG_PCI +#define pcibios_assign_all_busses() 1 +extern void unit_pci_init(void); +#else +#define pcibios_assign_all_busses() 0 +#endif + +extern unsigned long pci_mem_start; +#define PCIBIOS_MIN_IO 0xBE000004 +#define PCIBIOS_MIN_MEM 0xB8000000 + +void pcibios_set_master(struct pci_dev *dev); +void pcibios_penalize_isa_irq(int irq); + +/* Dynamic DMA mapping stuff. + * i386 has everything mapped statically. + */ + +#include <linux/types.h> +#include <linux/slab.h> +#include <asm/scatterlist.h> +#include <linux/string.h> +#include <linux/mm.h> +#include <asm/io.h> + +struct pci_dev; + +/* The PCI address space does equal the physical memory + * address space. The networking and block device layers use + * this boolean for bounce buffer decisions. + */ +#define PCI_DMA_BUS_IS_PHYS (1) + + +/* This is always fine. */ +#define pci_dac_dma_supported(pci_dev, mask) (0) + +/* Return the index of the PCI controller for device. */ +static inline int pci_controller_num(struct pci_dev *dev) +{ + return 0; +} + +#define HAVE_PCI_MMAP +extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, + enum pci_mmap_state mmap_state, + int write_combine); + +#endif /* __KERNEL__ */ + +/* implement the pci_ DMA API in terms of the generic device dma_ one */ +#include <asm-generic/pci-dma-compat.h> + +/** + * pcibios_resource_to_bus - convert resource to PCI bus address + * @dev: device which owns this resource + * @region: converted bus-centric region (start,end) + * @res: resource to convert + * + * Convert a resource to a PCI device bus address or bus window. + */ +extern void pcibios_resource_to_bus(struct pci_dev *dev, + struct pci_bus_region *region, + struct resource *res); + +extern void pcibios_bus_to_resource(struct pci_dev *dev, + struct resource *res, + struct pci_bus_region *region); + +static inline struct resource * +pcibios_select_root(struct pci_dev *pdev, struct resource *res) +{ + struct resource *root = NULL; + + if (res->flags & IORESOURCE_IO) + root = &ioport_resource; + if (res->flags & IORESOURCE_MEM) + root = &iomem_resource; + + return root; +} + +#define pcibios_scan_all_fns(a, b) 0 + +static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) +{ + return channel ? 15 : 14; +} + +#endif /* _ASM_PCI_H */ diff --git a/arch/mn10300/include/asm/percpu.h b/arch/mn10300/include/asm/percpu.h new file mode 100644 index 00000000000..06a959d6723 --- /dev/null +++ b/arch/mn10300/include/asm/percpu.h @@ -0,0 +1 @@ +#include <asm-generic/percpu.h> diff --git a/arch/mn10300/include/asm/pgalloc.h b/arch/mn10300/include/asm/pgalloc.h new file mode 100644 index 00000000000..ec057e1bd4c --- /dev/null +++ b/arch/mn10300/include/asm/pgalloc.h @@ -0,0 +1,56 @@ +/* MN10300 Page and page table/directory allocation + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_PGALLOC_H +#define _ASM_PGALLOC_H + +#include <asm/processor.h> +#include <asm/page.h> +#include <linux/threads.h> +#include <linux/mm.h> /* for struct page */ + +struct mm_struct; +struct page; + +/* attach a page table to a PMD entry */ +#define pmd_populate_kernel(mm, pmd, pte) \ + set_pmd(pmd, __pmd(__pa(pte) | _PAGE_TABLE)) + +static inline +void pmd_populate(struct mm_struct *mm, pmd_t *pmd, struct page *pte) +{ + set_pmd(pmd, __pmd((page_to_pfn(pte) << PAGE_SHIFT) | _PAGE_TABLE)); +} +#define pmd_pgtable(pmd) pmd_page(pmd) + +/* + * Allocate and free page tables. + */ + +extern pgd_t *pgd_alloc(struct mm_struct *); +extern void pgd_free(struct mm_struct *, pgd_t *); + +extern pte_t *pte_alloc_one_kernel(struct mm_struct *, unsigned long); +extern struct page *pte_alloc_one(struct mm_struct *, unsigned long); + +static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte) +{ + free_page((unsigned long) pte); +} + +static inline void pte_free(struct mm_struct *mm, struct page *pte) +{ + __free_page(pte); +} + + +#define __pte_free_tlb(tlb, pte) tlb_remove_page((tlb), (pte)) + +#endif /* _ASM_PGALLOC_H */ diff --git a/arch/mn10300/include/asm/pgtable.h b/arch/mn10300/include/asm/pgtable.h new file mode 100644 index 00000000000..6dc30fc827c --- /dev/null +++ b/arch/mn10300/include/asm/pgtable.h @@ -0,0 +1,492 @@ +/* MN10300 Page table manipulators and constants + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + * + * + * The Linux memory management assumes a three-level page table setup. On + * the i386, we use that, but "fold" the mid level into the top-level page + * table, so that we physically have the same two-level page table as the + * i386 mmu expects. + * + * This file contains the functions and defines necessary to modify and use + * the i386 page table tree for the purposes of the MN10300 TLB handler + * functions. + */ +#ifndef _ASM_PGTABLE_H +#define _ASM_PGTABLE_H + +#include <asm/cpu-regs.h> + +#ifndef __ASSEMBLY__ +#include <asm/processor.h> +#include <asm/cache.h> +#include <linux/threads.h> + +#include <asm/bitops.h> + +#include <linux/slab.h> +#include <linux/list.h> +#include <linux/spinlock.h> + +/* + * ZERO_PAGE is a global shared page that is always zero: used + * for zero-mapped memory areas etc.. + */ +#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page)) +extern unsigned long empty_zero_page[1024]; +extern spinlock_t pgd_lock; +extern struct page *pgd_list; + +extern void pmd_ctor(void *, struct kmem_cache *, unsigned long); +extern void pgtable_cache_init(void); +extern void paging_init(void); + +#endif /* !__ASSEMBLY__ */ + +/* + * The Linux mn10300 paging architecture only implements both the traditional + * 2-level page tables + */ +#define PGDIR_SHIFT 22 +#define PTRS_PER_PGD 1024 +#define PTRS_PER_PUD 1 /* we don't really have any PUD physically */ +#define PTRS_PER_PMD 1 /* we don't really have any PMD physically */ +#define PTRS_PER_PTE 1024 + +#define PGD_SIZE PAGE_SIZE +#define PMD_SIZE (1UL << PMD_SHIFT) +#define PGDIR_SIZE (1UL << PGDIR_SHIFT) +#define PGDIR_MASK (~(PGDIR_SIZE - 1)) + +#define USER_PTRS_PER_PGD (TASK_SIZE / PGDIR_SIZE) +#define FIRST_USER_ADDRESS 0 + +#define USER_PGD_PTRS (PAGE_OFFSET >> PGDIR_SHIFT) +#define KERNEL_PGD_PTRS (PTRS_PER_PGD - USER_PGD_PTRS) + +#define TWOLEVEL_PGDIR_SHIFT 22 +#define BOOT_USER_PGD_PTRS (__PAGE_OFFSET >> TWOLEVEL_PGDIR_SHIFT) +#define BOOT_KERNEL_PGD_PTRS (1024 - BOOT_USER_PGD_PTRS) + +#ifndef __ASSEMBLY__ +extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; +#endif + +/* + * Unfortunately, due to the way the MMU works on the MN10300, the vmalloc VM + * area has to be in the lower half of the virtual address range (the upper + * half is not translated through the TLB). + * + * So in this case, the vmalloc area goes at the bottom of the address map + * (leaving a hole at the very bottom to catch addressing errors), and + * userspace starts immediately above. + * + * The vmalloc() routines also leaves a hole of 4kB between each vmalloced + * area to catch addressing errors. + */ +#define VMALLOC_OFFSET (8 * 1024 * 1024) +#define VMALLOC_START (0x70000000) +#define VMALLOC_END (0x7C000000) + +#ifndef __ASSEMBLY__ +extern pte_t kernel_vmalloc_ptes[(VMALLOC_END - VMALLOC_START) / PAGE_SIZE]; +#endif + +/* IPTEL/DPTEL bit assignments */ +#define _PAGE_BIT_VALID xPTEL_V_BIT +#define _PAGE_BIT_ACCESSED xPTEL_UNUSED1_BIT /* mustn't be loaded into IPTEL/DPTEL */ +#define _PAGE_BIT_NX xPTEL_UNUSED2_BIT /* mustn't be loaded into IPTEL/DPTEL */ +#define _PAGE_BIT_CACHE xPTEL_C_BIT +#define _PAGE_BIT_PRESENT xPTEL_PV_BIT +#define _PAGE_BIT_DIRTY xPTEL_D_BIT +#define _PAGE_BIT_GLOBAL xPTEL_G_BIT + +#define _PAGE_VALID xPTEL_V +#define _PAGE_ACCESSED xPTEL_UNUSED1 +#define _PAGE_NX xPTEL_UNUSED2 /* no-execute bit */ +#define _PAGE_CACHE xPTEL_C +#define _PAGE_PRESENT xPTEL_PV +#define _PAGE_DIRTY xPTEL_D +#define _PAGE_PROT xPTEL_PR +#define _PAGE_PROT_RKNU xPTEL_PR_ROK +#define _PAGE_PROT_WKNU xPTEL_PR_RWK +#define _PAGE_PROT_RKRU xPTEL_PR_ROK_ROU +#define _PAGE_PROT_WKRU xPTEL_PR_RWK_ROU +#define _PAGE_PROT_WKWU xPTEL_PR_RWK_RWU +#define _PAGE_GLOBAL xPTEL_G +#define _PAGE_PSE xPTEL_PS_4Mb /* 4MB page */ + +#define _PAGE_FILE xPTEL_UNUSED1_BIT /* set:pagecache unset:swap */ + +#define __PAGE_PROT_UWAUX 0x040 +#define __PAGE_PROT_USER 0x080 +#define __PAGE_PROT_WRITE 0x100 + +#define _PAGE_PRESENTV (_PAGE_PRESENT|_PAGE_VALID) +#define _PAGE_PROTNONE 0x000 /* If not present */ + +#ifndef __ASSEMBLY__ + +#define VMALLOC_VMADDR(x) ((unsigned long)(x)) + +#define _PAGE_TABLE (_PAGE_PRESENTV | _PAGE_PROT_WKNU | _PAGE_ACCESSED | _PAGE_DIRTY) +#define _PAGE_CHG_MASK (PTE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY) + +#define __PAGE_NONE (_PAGE_PRESENTV | _PAGE_PROT_RKNU | _PAGE_ACCESSED | _PAGE_CACHE) +#define __PAGE_SHARED (_PAGE_PRESENTV | _PAGE_PROT_WKWU | _PAGE_ACCESSED | _PAGE_CACHE) +#define __PAGE_COPY (_PAGE_PRESENTV | _PAGE_PROT_RKRU | _PAGE_ACCESSED | _PAGE_CACHE) +#define __PAGE_READONLY (_PAGE_PRESENTV | _PAGE_PROT_RKRU | _PAGE_ACCESSED | _PAGE_CACHE) + +#define PAGE_NONE __pgprot(__PAGE_NONE | _PAGE_NX) +#define PAGE_SHARED_NOEXEC __pgprot(__PAGE_SHARED | _PAGE_NX) +#define PAGE_COPY_NOEXEC __pgprot(__PAGE_COPY | _PAGE_NX) +#define PAGE_READONLY_NOEXEC __pgprot(__PAGE_READONLY | _PAGE_NX) +#define PAGE_SHARED_EXEC __pgprot(__PAGE_SHARED) +#define PAGE_COPY_EXEC __pgprot(__PAGE_COPY) +#define PAGE_READONLY_EXEC __pgprot(__PAGE_READONLY) +#define PAGE_COPY PAGE_COPY_NOEXEC +#define PAGE_READONLY PAGE_READONLY_NOEXEC +#define PAGE_SHARED PAGE_SHARED_EXEC + +#define __PAGE_KERNEL_BASE (_PAGE_PRESENTV | _PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_GLOBAL) + +#define __PAGE_KERNEL (__PAGE_KERNEL_BASE | _PAGE_PROT_WKNU | _PAGE_CACHE | _PAGE_NX) +#define __PAGE_KERNEL_NOCACHE (__PAGE_KERNEL_BASE | _PAGE_PROT_WKNU | _PAGE_NX) +#define __PAGE_KERNEL_EXEC (__PAGE_KERNEL & ~_PAGE_NX) +#define __PAGE_KERNEL_RO (__PAGE_KERNEL_BASE | _PAGE_PROT_RKNU | _PAGE_CACHE | _PAGE_NX) +#define __PAGE_KERNEL_LARGE (__PAGE_KERNEL | _PAGE_PSE) +#define __PAGE_KERNEL_LARGE_EXEC (__PAGE_KERNEL_EXEC | _PAGE_PSE) + +#define PAGE_KERNEL __pgprot(__PAGE_KERNEL) +#define PAGE_KERNEL_RO __pgprot(__PAGE_KERNEL_RO) +#define PAGE_KERNEL_EXEC __pgprot(__PAGE_KERNEL_EXEC) +#define PAGE_KERNEL_NOCACHE __pgprot(__PAGE_KERNEL_NOCACHE) +#define PAGE_KERNEL_LARGE __pgprot(__PAGE_KERNEL_LARGE) +#define PAGE_KERNEL_LARGE_EXEC __pgprot(__PAGE_KERNEL_LARGE_EXEC) + +/* + * Whilst the MN10300 can do page protection for execute (given separate data + * and insn TLBs), we are not supporting it at the moment. Write permission, + * however, always implies read permission (but not execute permission). + */ +#define __P000 PAGE_NONE +#define __P001 PAGE_READONLY_NOEXEC +#define __P010 PAGE_COPY_NOEXEC +#define __P011 PAGE_COPY_NOEXEC +#define __P100 PAGE_READONLY_EXEC +#define __P101 PAGE_READONLY_EXEC +#define __P110 PAGE_COPY_EXEC +#define __P111 PAGE_COPY_EXEC + +#define __S000 PAGE_NONE +#define __S001 PAGE_READONLY_NOEXEC +#define __S010 PAGE_SHARED_NOEXEC +#define __S011 PAGE_SHARED_NOEXEC +#define __S100 PAGE_READONLY_EXEC +#define __S101 PAGE_READONLY_EXEC +#define __S110 PAGE_SHARED_EXEC +#define __S111 PAGE_SHARED_EXEC + +/* + * Define this to warn about kernel memory accesses that are + * done without a 'verify_area(VERIFY_WRITE,..)' + */ +#undef TEST_VERIFY_AREA + +#define pte_present(x) (pte_val(x) & _PAGE_VALID) +#define pte_clear(mm, addr, xp) \ +do { \ + set_pte_at((mm), (addr), (xp), __pte(0)); \ +} while (0) + +#define pmd_none(x) (!pmd_val(x)) +#define pmd_present(x) (!pmd_none(x)) +#define pmd_clear(xp) do { set_pmd(xp, __pmd(0)); } while (0) +#define pmd_bad(x) 0 + + +#define pages_to_mb(x) ((x) >> (20 - PAGE_SHIFT)) + +#ifndef __ASSEMBLY__ + +/* + * The following only work if pte_present() is true. + * Undefined behaviour if not.. + */ +static inline int pte_user(pte_t pte) { return pte_val(pte) & __PAGE_PROT_USER; } +static inline int pte_read(pte_t pte) { return pte_val(pte) & __PAGE_PROT_USER; } +static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; } +static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; } +static inline int pte_write(pte_t pte) { return pte_val(pte) & __PAGE_PROT_WRITE; } +static inline int pte_special(pte_t pte){ return 0; } + +/* + * The following only works if pte_present() is not true. + */ +static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE; } + +static inline pte_t pte_rdprotect(pte_t pte) +{ + pte_val(pte) &= ~(__PAGE_PROT_USER|__PAGE_PROT_UWAUX); return pte; +} +static inline pte_t pte_exprotect(pte_t pte) +{ + pte_val(pte) |= _PAGE_NX; return pte; +} + +static inline pte_t pte_wrprotect(pte_t pte) +{ + pte_val(pte) &= ~(__PAGE_PROT_WRITE|__PAGE_PROT_UWAUX); return pte; +} + +static inline pte_t pte_mkclean(pte_t pte) { pte_val(pte) &= ~_PAGE_DIRTY; return pte; } +static inline pte_t pte_mkold(pte_t pte) { pte_val(pte) &= ~_PAGE_ACCESSED; return pte; } +static inline pte_t pte_mkdirty(pte_t pte) { pte_val(pte) |= _PAGE_DIRTY; return pte; } +static inline pte_t pte_mkyoung(pte_t pte) { pte_val(pte) |= _PAGE_ACCESSED; return pte; } +static inline pte_t pte_mkexec(pte_t pte) { pte_val(pte) &= ~_PAGE_NX; return pte; } + +static inline pte_t pte_mkread(pte_t pte) +{ + pte_val(pte) |= __PAGE_PROT_USER; + if (pte_write(pte)) + pte_val(pte) |= __PAGE_PROT_UWAUX; + return pte; +} +static inline pte_t pte_mkwrite(pte_t pte) +{ + pte_val(pte) |= __PAGE_PROT_WRITE; + if (pte_val(pte) & __PAGE_PROT_USER) + pte_val(pte) |= __PAGE_PROT_UWAUX; + return pte; +} + +static inline pte_t pte_mkspecial(pte_t pte) { return pte; } + +#define pte_ERROR(e) \ + printk(KERN_ERR "%s:%d: bad pte %08lx.\n", \ + __FILE__, __LINE__, pte_val(e)) +#define pgd_ERROR(e) \ + printk(KERN_ERR "%s:%d: bad pgd %08lx.\n", \ + __FILE__, __LINE__, pgd_val(e)) + +/* + * The "pgd_xxx()" functions here are trivial for a folded two-level + * setup: the pgd is never bad, and a pmd always exists (as it's folded + * into the pgd entry) + */ +#define pgd_clear(xp) do { } while (0) + +/* + * Certain architectures need to do special things when PTEs + * within a page table are directly modified. Thus, the following + * hook is made available. + */ +#define set_pte(pteptr, pteval) (*(pteptr) = pteval) +#define set_pte_at(mm, addr, ptep, pteval) set_pte((ptep), (pteval)) +#define set_pte_atomic(pteptr, pteval) set_pte((pteptr), (pteval)) + +/* + * (pmds are folded into pgds so this doesn't get actually called, + * but the define is needed for a generic inline function.) + */ +#define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval) + +#define ptep_get_and_clear(mm, addr, ptep) \ + __pte(xchg(&(ptep)->pte, 0)) +#define pte_same(a, b) (pte_val(a) == pte_val(b)) +#define pte_page(x) pfn_to_page(pte_pfn(x)) +#define pte_none(x) (!pte_val(x)) +#define pte_pfn(x) ((unsigned long) (pte_val(x) >> PAGE_SHIFT)) +#define __pfn_addr(pfn) ((pfn) << PAGE_SHIFT) +#define pfn_pte(pfn, prot) __pte(__pfn_addr(pfn) | pgprot_val(prot)) +#define pfn_pmd(pfn, prot) __pmd(__pfn_addr(pfn) | pgprot_val(prot)) + +/* + * All present user pages are user-executable: + */ +static inline int pte_exec(pte_t pte) +{ + return pte_user(pte); +} + +/* + * All present pages are kernel-executable: + */ +static inline int pte_exec_kernel(pte_t pte) +{ + return 1; +} + +/* + * Bits 0 and 1 are taken, split up the 29 bits of offset + * into this range: + */ +#define PTE_FILE_MAX_BITS 29 + +#define pte_to_pgoff(pte) (pte_val(pte) >> 2) +#define pgoff_to_pte(off) __pte((off) << 2 | _PAGE_FILE) + +/* Encode and de-code a swap entry */ +#define __swp_type(x) (((x).val >> 2) & 0x3f) +#define __swp_offset(x) ((x).val >> 8) +#define __swp_entry(type, offset) \ + ((swp_entry_t) { ((type) << 2) | ((offset) << 8) }) +#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) +#define __swp_entry_to_pte(x) __pte((x).val) + +static inline +int ptep_test_and_clear_dirty(struct vm_area_struct *vma, unsigned long addr, + pte_t *ptep) +{ + if (!pte_dirty(*ptep)) + return 0; + return test_and_clear_bit(_PAGE_BIT_DIRTY, &ptep->pte); +} + +static inline +int ptep_test_and_clear_young(struct vm_area_struct *vma, unsigned long addr, + pte_t *ptep) +{ + if (!pte_young(*ptep)) + return 0; + return test_and_clear_bit(_PAGE_BIT_ACCESSED, &ptep->pte); +} + +static inline +void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep) +{ + pte_val(*ptep) &= ~(__PAGE_PROT_WRITE|__PAGE_PROT_UWAUX); +} + +static inline void ptep_mkdirty(pte_t *ptep) +{ + set_bit(_PAGE_BIT_DIRTY, &ptep->pte); +} + +/* + * Macro to mark a page protection value as "uncacheable". On processors which + * do not support it, this is a no-op. + */ +#define pgprot_noncached(prot) __pgprot(pgprot_val(prot) | _PAGE_CACHE) + + +/* + * Conversion functions: convert a page and protection to a page entry, + * and a page entry and page directory to the page they refer to. + */ + +#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot)) +#define mk_pte_huge(entry) \ + ((entry).pte |= _PAGE_PRESENT | _PAGE_PSE | _PAGE_VALID) + +static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) +{ + pte_val(pte) &= _PAGE_CHG_MASK; + pte_val(pte) |= pgprot_val(newprot); + return pte; +} + +#define page_pte(page) page_pte_prot((page), __pgprot(0)) + +#define pmd_page_kernel(pmd) \ + ((unsigned long) __va(pmd_val(pmd) & PAGE_MASK)) + +#define pmd_page(pmd) pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT) + +#define pmd_large(pmd) \ + ((pmd_val(pmd) & (_PAGE_PSE | _PAGE_PRESENT)) == \ + (_PAGE_PSE | _PAGE_PRESENT)) + +/* + * the pgd page can be thought of an array like this: pgd_t[PTRS_PER_PGD] + * + * this macro returns the index of the entry in the pgd page which would + * control the given virtual address + */ +#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1)) + +/* + * pgd_offset() returns a (pgd_t *) + * pgd_index() is used get the offset into the pgd page's array of pgd_t's; + */ +#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address)) + +/* + * a shortcut which implies the use of the kernel's pgd, instead + * of a process's + */ +#define pgd_offset_k(address) pgd_offset(&init_mm, address) + +/* + * the pmd page can be thought of an array like this: pmd_t[PTRS_PER_PMD] + * + * this macro returns the index of the entry in the pmd page which would + * control the given virtual address + */ +#define pmd_index(address) \ + (((address) >> PMD_SHIFT) & (PTRS_PER_PMD - 1)) + +/* + * the pte page can be thought of an array like this: pte_t[PTRS_PER_PTE] + * + * this macro returns the index of the entry in the pte page which would + * control the given virtual address + */ +#define pte_index(address) \ + (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) + +#define pte_offset_kernel(dir, address) \ + ((pte_t *) pmd_page_kernel(*(dir)) + pte_index(address)) + +/* + * Make a given kernel text page executable/non-executable. + * Returns the previous executability setting of that page (which + * is used to restore the previous state). Used by the SMP bootup code. + * NOTE: this is an __init function for security reasons. + */ +static inline int set_kernel_exec(unsigned long vaddr, int enable) +{ + return 0; +} + +#define pte_offset_map(dir, address) \ + ((pte_t *) page_address(pmd_page(*(dir))) + pte_index(address)) +#define pte_offset_map_nested(dir, address) pte_offset_map(dir, address) +#define pte_unmap(pte) do {} while (0) +#define pte_unmap_nested(pte) do {} while (0) + +/* + * The MN10300 has external MMU info in the form of a TLB: this is adapted from + * the kernel page tables containing the necessary information by tlb-mn10300.S + */ +extern void update_mmu_cache(struct vm_area_struct *vma, + unsigned long address, pte_t pte); + +#endif /* !__ASSEMBLY__ */ + +#define kern_addr_valid(addr) (1) + +#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \ + remap_pfn_range((vma), (vaddr), (pfn), (size), (prot)) + +#define MK_IOSPACE_PFN(space, pfn) (pfn) +#define GET_IOSPACE(pfn) 0 +#define GET_PFN(pfn) (pfn) + +#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG +#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_DIRTY +#define __HAVE_ARCH_PTEP_GET_AND_CLEAR +#define __HAVE_ARCH_PTEP_SET_WRPROTECT +#define __HAVE_ARCH_PTEP_MKDIRTY +#define __HAVE_ARCH_PTE_SAME +#include <asm-generic/pgtable.h> + +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_PGTABLE_H */ diff --git a/arch/mn10300/include/asm/pio-regs.h b/arch/mn10300/include/asm/pio-regs.h new file mode 100644 index 00000000000..96bc8182d0b --- /dev/null +++ b/arch/mn10300/include/asm/pio-regs.h @@ -0,0 +1,233 @@ +/* MN10300 On-board I/O port module registers + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_PIO_REGS_H +#define _ASM_PIO_REGS_H + +#include <asm/cpu-regs.h> +#include <asm/intctl-regs.h> + +#ifdef __KERNEL__ + +/* I/O port 0 */ +#define P0MD __SYSREG(0xdb000000, u16) /* mode reg */ +#define P0MD_0 0x0003 /* mask */ +#define P0MD_0_IN 0x0000 /* input mode */ +#define P0MD_0_OUT 0x0001 /* output mode */ +#define P0MD_0_TM0IO 0x0002 /* timer 0 I/O mode */ +#define P0MD_0_EYECLK 0x0003 /* test signal output (clock) */ +#define P0MD_1 0x000c +#define P0MD_1_IN 0x0000 +#define P0MD_1_OUT 0x0004 +#define P0MD_1_TM1IO 0x0008 /* timer 1 I/O mode */ +#define P0MD_1_EYED 0x000c /* test signal output (data) */ +#define P0MD_2 0x0030 +#define P0MD_2_IN 0x0000 +#define P0MD_2_OUT 0x0010 +#define P0MD_2_TM2IO 0x0020 /* timer 2 I/O mode */ +#define P0MD_3 0x00c0 +#define P0MD_3_IN 0x0000 +#define P0MD_3_OUT 0x0040 +#define P0MD_3_TM3IO 0x0080 /* timer 3 I/O mode */ +#define P0MD_4 0x0300 +#define P0MD_4_IN 0x0000 +#define P0MD_4_OUT 0x0100 +#define P0MD_4_TM4IO 0x0200 /* timer 4 I/O mode */ +#define P0MD_4_XCTS 0x0300 /* XCTS input for serial port 2 */ +#define P0MD_5 0x0c00 +#define P0MD_5_IN 0x0000 +#define P0MD_5_OUT 0x0400 +#define P0MD_5_TM5IO 0x0800 /* timer 5 I/O mode */ +#define P0MD_6 0x3000 +#define P0MD_6_IN 0x0000 +#define P0MD_6_OUT 0x1000 +#define P0MD_6_TM6IOA 0x2000 /* timer 6 I/O mode A */ +#define P0MD_7 0xc000 +#define P0MD_7_IN 0x0000 +#define P0MD_7_OUT 0x4000 +#define P0MD_7_TM6IOB 0x8000 /* timer 6 I/O mode B */ + +#define P0IN __SYSREG(0xdb000004, u8) /* in reg */ +#define P0OUT __SYSREG(0xdb000008, u8) /* out reg */ + +#define P0TMIO __SYSREG(0xdb00000c, u8) /* TM pin I/O control reg */ +#define P0TMIO_TM0_IN 0x00 +#define P0TMIO_TM0_OUT 0x01 +#define P0TMIO_TM1_IN 0x00 +#define P0TMIO_TM1_OUT 0x02 +#define P0TMIO_TM2_IN 0x00 +#define P0TMIO_TM2_OUT 0x04 +#define P0TMIO_TM3_IN 0x00 +#define P0TMIO_TM3_OUT 0x08 +#define P0TMIO_TM4_IN 0x00 +#define P0TMIO_TM4_OUT 0x10 +#define P0TMIO_TM5_IN 0x00 +#define P0TMIO_TM5_OUT 0x20 +#define P0TMIO_TM6A_IN 0x00 +#define P0TMIO_TM6A_OUT 0x40 +#define P0TMIO_TM6B_IN 0x00 +#define P0TMIO_TM6B_OUT 0x80 + +/* I/O port 1 */ +#define P1MD __SYSREG(0xdb000100, u16) /* mode reg */ +#define P1MD_0 0x0003 /* mask */ +#define P1MD_0_IN 0x0000 /* input mode */ +#define P1MD_0_OUT 0x0001 /* output mode */ +#define P1MD_0_TM7IO 0x0002 /* timer 7 I/O mode */ +#define P1MD_0_ADTRG 0x0003 /* A/D converter trigger mode */ +#define P1MD_1 0x000c +#define P1MD_1_IN 0x0000 +#define P1MD_1_OUT 0x0004 +#define P1MD_1_TM8IO 0x0008 /* timer 8 I/O mode */ +#define P1MD_1_XDMR0 0x000c /* DMA request input 0 mode */ +#define P1MD_2 0x0030 +#define P1MD_2_IN 0x0000 +#define P1MD_2_OUT 0x0010 +#define P1MD_2_TM9IO 0x0020 /* timer 9 I/O mode */ +#define P1MD_2_XDMR1 0x0030 /* DMA request input 1 mode */ +#define P1MD_3 0x00c0 +#define P1MD_3_IN 0x0000 +#define P1MD_3_OUT 0x0040 +#define P1MD_3_TM10IO 0x0080 /* timer 10 I/O mode */ +#define P1MD_3_FRQS0 0x00c0 /* CPU clock multiplier setting input 0 mode */ +#define P1MD_4 0x0300 +#define P1MD_4_IN 0x0000 +#define P1MD_4_OUT 0x0100 +#define P1MD_4_TM11IO 0x0200 /* timer 11 I/O mode */ +#define P1MD_4_FRQS1 0x0300 /* CPU clock multiplier setting input 1 mode */ + +#define P1IN __SYSREG(0xdb000104, u8) /* in reg */ +#define P1OUT __SYSREG(0xdb000108, u8) /* out reg */ +#define P1TMIO __SYSREG(0xdb00010c, u8) /* TM pin I/O control reg */ +#define P1TMIO_TM11_IN 0x00 +#define P1TMIO_TM11_OUT 0x01 +#define P1TMIO_TM10_IN 0x00 +#define P1TMIO_TM10_OUT 0x02 +#define P1TMIO_TM9_IN 0x00 +#define P1TMIO_TM9_OUT 0x04 +#define P1TMIO_TM8_IN 0x00 +#define P1TMIO_TM8_OUT 0x08 +#define P1TMIO_TM7_IN 0x00 +#define P1TMIO_TM7_OUT 0x10 + +/* I/O port 2 */ +#define P2MD __SYSREG(0xdb000200, u16) /* mode reg */ +#define P2MD_0 0x0003 /* mask */ +#define P2MD_0_IN 0x0000 /* input mode */ +#define P2MD_0_OUT 0x0001 /* output mode */ +#define P2MD_0_BOOTBW 0x0003 /* boot bus width selector mode */ +#define P2MD_1 0x000c +#define P2MD_1_IN 0x0000 +#define P2MD_1_OUT 0x0004 +#define P2MD_1_BOOTSEL 0x000c /* boot device selector mode */ +#define P2MD_2 0x0030 +#define P2MD_2_IN 0x0000 +#define P2MD_2_OUT 0x0010 +#define P2MD_3 0x00c0 +#define P2MD_3_IN 0x0000 +#define P2MD_3_OUT 0x0040 +#define P2MD_3_CKIO 0x00c0 /* mode */ +#define P2MD_4 0x0300 +#define P2MD_4_IN 0x0000 +#define P2MD_4_OUT 0x0100 +#define P2MD_4_CMOD 0x0300 /* mode */ + +#define P2IN __SYSREG(0xdb000204, u8) /* in reg */ +#define P2OUT __SYSREG(0xdb000208, u8) /* out reg */ +#define P2TMIO __SYSREG(0xdb00020c, u8) /* TM pin I/O control reg */ + +/* I/O port 3 */ +#define P3MD __SYSREG(0xdb000300, u16) /* mode reg */ +#define P3MD_0 0x0003 /* mask */ +#define P3MD_0_IN 0x0000 /* input mode */ +#define P3MD_0_OUT 0x0001 /* output mode */ +#define P3MD_0_AFRXD 0x0002 /* AFR interface mode */ +#define P3MD_1 0x000c +#define P3MD_1_IN 0x0000 +#define P3MD_1_OUT 0x0004 +#define P3MD_1_AFTXD 0x0008 /* AFR interface mode */ +#define P3MD_2 0x0030 +#define P3MD_2_IN 0x0000 +#define P3MD_2_OUT 0x0010 +#define P3MD_2_AFSCLK 0x0020 /* AFR interface mode */ +#define P3MD_3 0x00c0 +#define P3MD_3_IN 0x0000 +#define P3MD_3_OUT 0x0040 +#define P3MD_3_AFFS 0x0080 /* AFR interface mode */ +#define P3MD_4 0x0300 +#define P3MD_4_IN 0x0000 +#define P3MD_4_OUT 0x0100 +#define P3MD_4_AFEHC 0x0200 /* AFR interface mode */ + +#define P3IN __SYSREG(0xdb000304, u8) /* in reg */ +#define P3OUT __SYSREG(0xdb000308, u8) /* out reg */ + +/* I/O port 4 */ +#define P4MD __SYSREG(0xdb000400, u16) /* mode reg */ +#define P4MD_0 0x0003 /* mask */ +#define P4MD_0_IN 0x0000 /* input mode */ +#define P4MD_0_OUT 0x0001 /* output mode */ +#define P4MD_0_SCL0 0x0002 /* I2C/serial mode */ +#define P4MD_1 0x000c +#define P4MD_1_IN 0x0000 +#define P4MD_1_OUT 0x0004 +#define P4MD_1_SDA0 0x0008 +#define P4MD_2 0x0030 +#define P4MD_2_IN 0x0000 +#define P4MD_2_OUT 0x0010 +#define P4MD_2_SCL1 0x0020 +#define P4MD_3 0x00c0 +#define P4MD_3_IN 0x0000 +#define P4MD_3_OUT 0x0040 +#define P4MD_3_SDA1 0x0080 +#define P4MD_4 0x0300 +#define P4MD_4_IN 0x0000 +#define P4MD_4_OUT 0x0100 +#define P4MD_4_SBO0 0x0200 +#define P4MD_5 0x0c00 +#define P4MD_5_IN 0x0000 +#define P4MD_5_OUT 0x0400 +#define P4MD_5_SBO1 0x0800 +#define P4MD_6 0x3000 +#define P4MD_6_IN 0x0000 +#define P4MD_6_OUT 0x1000 +#define P4MD_6_SBT0 0x2000 +#define P4MD_7 0xc000 +#define P4MD_7_IN 0x0000 +#define P4MD_7_OUT 0x4000 +#define P4MD_7_SBT1 0x8000 + +#define P4IN __SYSREG(0xdb000404, u8) /* in reg */ +#define P4OUT __SYSREG(0xdb000408, u8) /* out reg */ + +/* I/O port 5 */ +#define P5MD __SYSREG(0xdb000500, u16) /* mode reg */ +#define P5MD_0 0x0003 /* mask */ +#define P5MD_0_IN 0x0000 /* input mode */ +#define P5MD_0_OUT 0x0001 /* output mode */ +#define P5MD_0_IRTXD 0x0002 /* IrDA mode */ +#define P5MD_0_SOUT 0x0004 /* serial mode */ +#define P5MD_1 0x000c +#define P5MD_1_IN 0x0000 +#define P5MD_1_OUT 0x0004 +#define P5MD_1_IRRXDS 0x0008 /* IrDA mode */ +#define P5MD_1_SIN 0x000c /* serial mode */ +#define P5MD_2 0x0030 +#define P5MD_2_IN 0x0000 +#define P5MD_2_OUT 0x0010 +#define P5MD_2_IRRXDF 0x0020 /* IrDA mode */ + +#define P5IN __SYSREG(0xdb000504, u8) /* in reg */ +#define P5OUT __SYSREG(0xdb000508, u8) /* out reg */ + + +#endif /* __KERNEL__ */ + +#endif /* _ASM_PIO_REGS_H */ diff --git a/arch/mn10300/include/asm/poll.h b/arch/mn10300/include/asm/poll.h new file mode 100644 index 00000000000..c98509d3149 --- /dev/null +++ b/arch/mn10300/include/asm/poll.h @@ -0,0 +1 @@ +#include <asm-generic/poll.h> diff --git a/arch/mn10300/include/asm/posix_types.h b/arch/mn10300/include/asm/posix_types.h new file mode 100644 index 00000000000..077567c3779 --- /dev/null +++ b/arch/mn10300/include/asm/posix_types.h @@ -0,0 +1,132 @@ +/* MN10300 POSIX types + * + * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_POSIX_TYPES_H +#define _ASM_POSIX_TYPES_H + +/* + * This file is generally used by user-level software, so you need to + * be a little careful about namespace pollution etc. Also, we cannot + * assume GCC is being used. + */ + +typedef unsigned long __kernel_ino_t; +typedef unsigned short __kernel_mode_t; +typedef unsigned short __kernel_nlink_t; +typedef long __kernel_off_t; +typedef int __kernel_pid_t; +typedef unsigned short __kernel_ipc_pid_t; +typedef unsigned short __kernel_uid_t; +typedef unsigned short __kernel_gid_t; +typedef unsigned long __kernel_size_t; +typedef long __kernel_ssize_t; +typedef int __kernel_ptrdiff_t; +typedef long __kernel_time_t; +typedef long __kernel_suseconds_t; +typedef long __kernel_clock_t; +typedef int __kernel_timer_t; +typedef int __kernel_clockid_t; +typedef int __kernel_daddr_t; +typedef char * __kernel_caddr_t; +typedef unsigned short __kernel_uid16_t; +typedef unsigned short __kernel_gid16_t; +typedef unsigned int __kernel_uid32_t; +typedef unsigned int __kernel_gid32_t; + +typedef unsigned short __kernel_old_uid_t; +typedef unsigned short __kernel_old_gid_t; +typedef unsigned short __kernel_old_dev_t; + +#ifdef __GNUC__ +typedef long long __kernel_loff_t; +#endif + +typedef struct { +#if defined(__KERNEL__) || defined(__USE_ALL) + int val[2]; +#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */ + int __val[2]; +#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */ +} __kernel_fsid_t; + +#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) + +#undef __FD_SET +static inline void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp) +{ + unsigned long __tmp = __fd / __NFDBITS; + unsigned long __rem = __fd % __NFDBITS; + __fdsetp->fds_bits[__tmp] |= (1UL<<__rem); +} + +#undef __FD_CLR +static inline void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp) +{ + unsigned long __tmp = __fd / __NFDBITS; + unsigned long __rem = __fd % __NFDBITS; + __fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem); +} + + +#undef __FD_ISSET +static inline int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p) +{ + unsigned long __tmp = __fd / __NFDBITS; + unsigned long __rem = __fd % __NFDBITS; + return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0; +} + +/* + * This will unroll the loop for the normal constant case (8 ints, + * for a 256-bit fd_set) + */ +#undef __FD_ZERO +static inline void __FD_ZERO(__kernel_fd_set *__p) +{ + unsigned long *__tmp = __p->fds_bits; + int __i; + + if (__builtin_constant_p(__FDSET_LONGS)) { + switch (__FDSET_LONGS) { + case 16: + __tmp[ 0] = 0; __tmp[ 1] = 0; + __tmp[ 2] = 0; __tmp[ 3] = 0; + __tmp[ 4] = 0; __tmp[ 5] = 0; + __tmp[ 6] = 0; __tmp[ 7] = 0; + __tmp[ 8] = 0; __tmp[ 9] = 0; + __tmp[10] = 0; __tmp[11] = 0; + __tmp[12] = 0; __tmp[13] = 0; + __tmp[14] = 0; __tmp[15] = 0; + return; + + case 8: + __tmp[ 0] = 0; __tmp[ 1] = 0; + __tmp[ 2] = 0; __tmp[ 3] = 0; + __tmp[ 4] = 0; __tmp[ 5] = 0; + __tmp[ 6] = 0; __tmp[ 7] = 0; + return; + + case 4: + __tmp[ 0] = 0; __tmp[ 1] = 0; + __tmp[ 2] = 0; __tmp[ 3] = 0; + return; + } + } + __i = __FDSET_LONGS; + while (__i) { + __i--; + *__tmp = 0; + __tmp++; + } +} + +#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */ + +#endif /* _ASM_POSIX_TYPES_H */ diff --git a/arch/mn10300/include/asm/processor.h b/arch/mn10300/include/asm/processor.h new file mode 100644 index 00000000000..73239271873 --- /dev/null +++ b/arch/mn10300/include/asm/processor.h @@ -0,0 +1,186 @@ +/* MN10300 Processor specifics + * + * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _ASM_PROCESSOR_H +#define _ASM_PROCESSOR_H + +#include <asm/page.h> +#include <asm/ptrace.h> +#include <asm/cpu-regs.h> +#include <linux/threads.h> + +/* Forward declaration, a strange C thing */ +struct task_struct; +struct mm_struct; + +/* + * Default implementation of macro that returns current + * instruction pointer ("program counter"). + */ +#define current_text_addr() \ +({ \ + void *__pc; \ + asm("mov pc,%0" : "=a"(__pc)); \ + __pc; \ +}) + +extern void show_registers(struct pt_regs *regs); + +/* + * CPU type and hardware bug flags. Kept separately for each CPU. + * Members of this structure are referenced in head.S, so think twice + * before touching them. [mj] + */ + +struct mn10300_cpuinfo { + int type; + unsigned long loops_per_sec; + char hard_math; + unsigned long *pgd_quick; + unsigned long *pte_quick; + unsigned long pgtable_cache_sz; +}; + +extern struct mn10300_cpuinfo boot_cpu_data; + +#define cpu_data &boot_cpu_data +#define current_cpu_data boot_cpu_data + +extern void identify_cpu(struct mn10300_cpuinfo *); +extern void print_cpu_info(struct mn10300_cpuinfo *); +extern void dodgy_tsc(void); +#define cpu_relax() barrier() + +/* + * User space process size: 1.75GB (default). + */ +#define TASK_SIZE 0x70000000 + +/* + * Where to put the userspace stack by default + */ +#define STACK_TOP 0x70000000 +#define STACK_TOP_MAX STACK_TOP + +/* This decides where the kernel will search for a free chunk of vm + * space during mmap's. + */ +#define TASK_UNMAPPED_BASE 0x30000000 + +typedef struct { + unsigned long seg; +} mm_segment_t; + +struct fpu_state_struct { + unsigned long fs[32]; /* fpu registers */ + unsigned long fpcr; /* fpu control register */ +}; + +struct thread_struct { + struct pt_regs *uregs; /* userspace register frame */ + unsigned long pc; /* kernel PC */ + unsigned long sp; /* kernel SP */ + unsigned long a3; /* kernel FP */ + unsigned long wchan; + unsigned long usp; + struct pt_regs *__frame; + unsigned long fpu_flags; +#define THREAD_USING_FPU 0x00000001 /* T if this task is using the FPU */ + struct fpu_state_struct fpu_state; +}; + +#define INIT_THREAD \ +{ \ + .uregs = init_uregs, \ + .pc = 0, \ + .sp = 0, \ + .a3 = 0, \ + .wchan = 0, \ + .__frame = NULL, \ +} + +#define INIT_MMAP \ +{ &init_mm, 0, 0, NULL, PAGE_SHARED, VM_READ | VM_WRITE | VM_EXEC, 1, \ + NULL, NULL } + +/* + * do necessary setup to start up a newly executed thread + * - need to discard the frame stacked by the kernel thread invoking the execve + * syscall (see RESTORE_ALL macro) + */ +#define start_thread(regs, new_pc, new_sp) do { \ + set_fs(USER_DS); \ + __frame = current->thread.uregs; \ + __frame->epsw = EPSW_nSL | EPSW_IE | EPSW_IM; \ + __frame->pc = new_pc; \ + __frame->sp = new_sp; \ +} while (0) + +/* Free all resources held by a thread. */ +extern void release_thread(struct task_struct *); + +/* Prepare to copy thread state - unlazy all lazy status */ +extern void prepare_to_copy(struct task_struct *tsk); + +/* + * create a kernel thread without removing it from tasklists + */ +extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags); + +/* + * Return saved PC of a blocked thread. + */ +extern unsigned long thread_saved_pc(struct task_struct *tsk); + +unsigned long get_wchan(struct task_struct *p); + +#define task_pt_regs(task) \ +({ \ + struct pt_regs *__regs__; \ + __regs__ = (struct pt_regs *) (KSTK_TOP(task_stack_page(task)) - 8); \ + __regs__ - 1; \ +}) + +#define KSTK_EIP(task) (task_pt_regs(task)->pc) +#define KSTK_ESP(task) (task_pt_regs(task)->sp) + +#define KSTK_TOP(info) \ +({ \ + (unsigned long)(info) + THREAD_SIZE; \ +}) + +#define ARCH_HAS_PREFETCH +#define ARCH_HAS_PREFETCHW + +static inline void prefetch(const void *x) +{ +#ifndef CONFIG_MN10300_CACHE_DISABLED +#ifdef CONFIG_MN10300_PROC_MN103E010 + asm volatile ("nop; nop; dcpf (%0)" : : "r"(x)); +#else + asm volatile ("dcpf (%0)" : : "r"(x)); +#endif +#endif +} + +static inline void prefetchw(const void *x) +{ +#ifndef CONFIG_MN10300_CACHE_DISABLED +#ifdef CONFIG_MN10300_PROC_MN103E010 + asm volatile ("nop; nop; dcpf (%0)" : : "r"(x)); +#else + asm volatile ("dcpf (%0)" : : "r"(x)); +#endif +#endif +} + +#endif /* _ASM_PROCESSOR_H */ diff --git a/arch/mn10300/include/asm/ptrace.h b/arch/mn10300/include/asm/ptrace.h new file mode 100644 index 00000000000..7b06cc623d8 --- /dev/null +++ b/arch/mn10300/include/asm/ptrace.h @@ -0,0 +1,103 @@ +/* MN10300 Exception frame layout and ptrace constants + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_PTRACE_H +#define _ASM_PTRACE_H + +#define PT_A3 0 +#define PT_A2 1 +#define PT_D3 2 +#define PT_D2 3 +#define PT_MCVF 4 +#define PT_MCRL 5 +#define PT_MCRH 6 +#define PT_MDRQ 7 +#define PT_E1 8 +#define PT_E0 9 +#define PT_E7 10 +#define PT_E6 11 +#define PT_E5 12 +#define PT_E4 13 +#define PT_E3 14 +#define PT_E2 15 +#define PT_SP 16 +#define PT_LAR 17 +#define PT_LIR 18 +#define PT_MDR 19 +#define PT_A1 20 +#define PT_A0 21 +#define PT_D1 22 +#define PT_D0 23 +#define PT_ORIG_D0 24 +#define PT_EPSW 25 +#define PT_PC 26 +#define NR_PTREGS 27 + +#ifndef __ASSEMBLY__ +/* + * This defines the way registers are stored in the event of an exception + * - the strange order is due to the MOVM instruction + */ +struct pt_regs { + unsigned long a3; /* syscall arg 3 */ + unsigned long a2; /* syscall arg 4 */ + unsigned long d3; /* syscall arg 5 */ + unsigned long d2; /* syscall arg 6 */ + unsigned long mcvf; + unsigned long mcrl; + unsigned long mcrh; + unsigned long mdrq; + unsigned long e1; + unsigned long e0; + unsigned long e7; + unsigned long e6; + unsigned long e5; + unsigned long e4; + unsigned long e3; + unsigned long e2; + unsigned long sp; + unsigned long lar; + unsigned long lir; + unsigned long mdr; + unsigned long a1; + unsigned long a0; /* syscall arg 1 */ + unsigned long d1; /* syscall arg 2 */ + unsigned long d0; /* syscall ret */ + struct pt_regs *next; /* next frame pointer */ + unsigned long orig_d0; /* syscall number */ + unsigned long epsw; + unsigned long pc; +}; +#endif + +extern struct pt_regs *__frame; /* current frame pointer */ + +/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */ +#define PTRACE_GETREGS 12 +#define PTRACE_SETREGS 13 +#define PTRACE_GETFPREGS 14 +#define PTRACE_SETFPREGS 15 + +/* options set using PTRACE_SETOPTIONS */ +#define PTRACE_O_TRACESYSGOOD 0x00000001 + +#if defined(__KERNEL__) + +#if !defined(__ASSEMBLY__) +#define user_mode(regs) (((regs)->epsw & EPSW_nSL) == EPSW_nSL) +#define instruction_pointer(regs) ((regs)->pc) +extern void show_regs(struct pt_regs *); +#endif /* !__ASSEMBLY */ + +#define profile_pc(regs) ((regs)->pc) + +#endif /* __KERNEL__ */ + +#endif /* _ASM_PTRACE_H */ diff --git a/arch/mn10300/include/asm/reset-regs.h b/arch/mn10300/include/asm/reset-regs.h new file mode 100644 index 00000000000..174523d5013 --- /dev/null +++ b/arch/mn10300/include/asm/reset-regs.h @@ -0,0 +1,64 @@ +/* MN10300 Reset controller and watchdog timer definitions + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _ASM_RESET_REGS_H +#define _ASM_RESET_REGS_H + +#include <asm/cpu-regs.h> +#include <asm/exceptions.h> + +#ifdef __KERNEL__ + +#ifdef CONFIG_MN10300_WD_TIMER +#define ARCH_HAS_NMI_WATCHDOG /* See include/linux/nmi.h */ +#endif + +/* + * watchdog timer registers + */ +#define WDBC __SYSREGC(0xc0001000, u8) /* watchdog binary counter reg */ + +#define WDCTR __SYSREG(0xc0001002, u8) /* watchdog timer control reg */ +#define WDCTR_WDCK 0x07 /* clock source selection */ +#define WDCTR_WDCK_256th 0x00 /* - OSCI/256 */ +#define WDCTR_WDCK_1024th 0x01 /* - OSCI/1024 */ +#define WDCTR_WDCK_2048th 0x02 /* - OSCI/2048 */ +#define WDCTR_WDCK_16384th 0x03 /* - OSCI/16384 */ +#define WDCTR_WDCK_65536th 0x04 /* - OSCI/65536 */ +#define WDCTR_WDRST 0x40 /* binary counter reset */ +#define WDCTR_WDCNE 0x80 /* watchdog timer enable */ + +#define RSTCTR __SYSREG(0xc0001004, u8) /* reset control reg */ +#define RSTCTR_CHIPRST 0x01 /* chip reset */ +#define RSTCTR_DBFRST 0x02 /* double fault reset flag */ +#define RSTCTR_WDTRST 0x04 /* watchdog timer reset flag */ +#define RSTCTR_WDREN 0x08 /* watchdog timer reset enable */ + +#ifndef __ASSEMBLY__ + +static inline void mn10300_proc_hard_reset(void) +{ + RSTCTR &= ~RSTCTR_CHIPRST; + RSTCTR |= RSTCTR_CHIPRST; +} + +extern unsigned int watchdog_alert_counter; + +extern void watchdog_go(void); +extern asmlinkage void watchdog_handler(void); +extern asmlinkage +void watchdog_interrupt(struct pt_regs *, enum exception_code); + +#endif + +#endif /* __KERNEL__ */ + +#endif /* _ASM_RESET_REGS_H */ diff --git a/arch/mn10300/include/asm/resource.h b/arch/mn10300/include/asm/resource.h new file mode 100644 index 00000000000..04bc4db8921 --- /dev/null +++ b/arch/mn10300/include/asm/resource.h @@ -0,0 +1 @@ +#include <asm-generic/resource.h> diff --git a/arch/mn10300/include/asm/rtc-regs.h b/arch/mn10300/include/asm/rtc-regs.h new file mode 100644 index 00000000000..c42deefaec1 --- /dev/null +++ b/arch/mn10300/include/asm/rtc-regs.h @@ -0,0 +1,86 @@ +/* MN10300 on-chip Real-Time Clock registers + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_RTC_REGS_H +#define _ASM_RTC_REGS_H + +#include <asm/intctl-regs.h> + +#ifdef __KERNEL__ + +#define RTSCR __SYSREG(0xd8600000, u8) /* RTC seconds count reg */ +#define RTSAR __SYSREG(0xd8600001, u8) /* RTC seconds alarm reg */ +#define RTMCR __SYSREG(0xd8600002, u8) /* RTC minutes count reg */ +#define RTMAR __SYSREG(0xd8600003, u8) /* RTC minutes alarm reg */ +#define RTHCR __SYSREG(0xd8600004, u8) /* RTC hours count reg */ +#define RTHAR __SYSREG(0xd8600005, u8) /* RTC hours alarm reg */ +#define RTDWCR __SYSREG(0xd8600006, u8) /* RTC day of the week count reg */ +#define RTDMCR __SYSREG(0xd8600007, u8) /* RTC days count reg */ +#define RTMTCR __SYSREG(0xd8600008, u8) /* RTC months count reg */ +#define RTYCR __SYSREG(0xd8600009, u8) /* RTC years count reg */ + +#define RTCRA __SYSREG(0xd860000a, u8)/* RTC control reg A */ +#define RTCRA_RS 0x0f /* periodic timer interrupt cycle setting */ +#define RTCRA_RS_NONE 0x00 /* - off */ +#define RTCRA_RS_3_90625ms 0x01 /* - 3.90625ms (1/256s) */ +#define RTCRA_RS_7_8125ms 0x02 /* - 7.8125ms (1/128s) */ +#define RTCRA_RS_122_070us 0x03 /* - 122.070us (1/8192s) */ +#define RTCRA_RS_244_141us 0x04 /* - 244.141us (1/4096s) */ +#define RTCRA_RS_488_281us 0x05 /* - 488.281us (1/2048s) */ +#define RTCRA_RS_976_5625us 0x06 /* - 976.5625us (1/1024s) */ +#define RTCRA_RS_1_953125ms 0x07 /* - 1.953125ms (1/512s) */ +#define RTCRA_RS_3_90624ms 0x08 /* - 3.90624ms (1/256s) */ +#define RTCRA_RS_7_8125ms_b 0x09 /* - 7.8125ms (1/128s) */ +#define RTCRA_RS_15_625ms 0x0a /* - 15.625ms (1/64s) */ +#define RTCRA_RS_31_25ms 0x0b /* - 31.25ms (1/32s) */ +#define RTCRA_RS_62_5ms 0x0c /* - 62.5ms (1/16s) */ +#define RTCRA_RS_125ms 0x0d /* - 125ms (1/8s) */ +#define RTCRA_RS_250ms 0x0e /* - 250ms (1/4s) */ +#define RTCRA_RS_500ms 0x0f /* - 500ms (1/2s) */ +#define RTCRA_DVR 0x40 /* divider reset */ +#define RTCRA_UIP 0x80 /* clock update flag */ + +#define RTCRB __SYSREG(0xd860000b, u8) /* RTC control reg B */ +#define RTCRB_DSE 0x01 /* daylight savings time enable */ +#define RTCRB_TM 0x02 /* time format */ +#define RTCRB_TM_12HR 0x00 /* - 12 hour format */ +#define RTCRB_TM_24HR 0x02 /* - 24 hour format */ +#define RTCRB_DM 0x04 /* numeric value format */ +#define RTCRB_DM_BCD 0x00 /* - BCD */ +#define RTCRB_DM_BINARY 0x04 /* - binary */ +#define RTCRB_UIE 0x10 /* update interrupt disable */ +#define RTCRB_AIE 0x20 /* alarm interrupt disable */ +#define RTCRB_PIE 0x40 /* periodic interrupt disable */ +#define RTCRB_SET 0x80 /* clock update enable */ + +#define RTSRC __SYSREG(0xd860000c, u8) /* RTC status reg C */ +#define RTSRC_UF 0x10 /* update end interrupt flag */ +#define RTSRC_AF 0x20 /* alarm interrupt flag */ +#define RTSRC_PF 0x40 /* periodic interrupt flag */ +#define RTSRC_IRQF 0x80 /* interrupt flag */ + +#define RTIRQ 32 +#define RTICR GxICR(RTIRQ) + +/* + * MC146818 RTC compatibility defs for the MN10300 on-chip RTC + */ +#define RTC_PORT(x) 0xd8600000 +#define RTC_ALWAYS_BCD 1 /* RTC operates in binary mode */ + +#define CMOS_READ(addr) __SYSREG(0xd8600000 + (addr), u8) +#define CMOS_WRITE(val, addr) \ + do { __SYSREG(0xd8600000 + (addr), u8) = val; } while (0) + +#define RTC_IRQ RTIRQ + +#endif /* __KERNEL__ */ + +#endif /* _ASM_RTC_REGS_H */ diff --git a/arch/mn10300/include/asm/rtc.h b/arch/mn10300/include/asm/rtc.h new file mode 100644 index 00000000000..c295194cc70 --- /dev/null +++ b/arch/mn10300/include/asm/rtc.h @@ -0,0 +1,41 @@ +/* MN10300 Real time clock definitions + * + * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_RTC_H +#define _ASM_RTC_H + +#ifdef CONFIG_MN10300_RTC + +#include <linux/init.h> + +extern void check_rtc_time(void); +extern void __init calibrate_clock(void); +extern unsigned long __init get_initial_rtc_time(void); + +#else /* !CONFIG_MN10300_RTC */ + +static inline void check_rtc_time(void) +{ +} + +static inline void calibrate_clock(void) +{ +} + +static inline unsigned long get_initial_rtc_time(void) +{ + return 0; +} + +#endif /* !CONFIG_MN10300_RTC */ + +#include <asm-generic/rtc.h> + +#endif /* _ASM_RTC_H */ diff --git a/arch/mn10300/include/asm/scatterlist.h b/arch/mn10300/include/asm/scatterlist.h new file mode 100644 index 00000000000..67535901b9f --- /dev/null +++ b/arch/mn10300/include/asm/scatterlist.h @@ -0,0 +1,55 @@ +/* MN10300 Scatterlist definitions + * + * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_SCATTERLIST_H +#define _ASM_SCATTERLIST_H + +#include <asm/types.h> + +/* + * Drivers must set either ->address or (preferred) page and ->offset + * to indicate where data must be transferred to/from. + * + * Using page is recommended since it handles highmem data as well as + * low mem. ->address is restricted to data which has a virtual mapping, and + * it will go away in the future. Updating to page can be automated very + * easily -- something like + * + * sg->address = some_ptr; + * + * can be rewritten as + * + * sg_set_page(virt_to_page(some_ptr)); + * sg->offset = (unsigned long) some_ptr & ~PAGE_MASK; + * + * and that's it. There's no excuse for not highmem enabling YOUR driver. /jens + */ +struct scatterlist { +#ifdef CONFIG_DEBUG_SG + unsigned long sg_magic; +#endif + unsigned long page_link; + unsigned int offset; /* for highmem, page offset */ + dma_addr_t dma_address; + unsigned int length; +}; + +#define ISA_DMA_THRESHOLD (0x00ffffff) + +/* + * These macros should be used after a pci_map_sg call has been done + * to get bus addresses of each of the SG entries and their lengths. + * You should only work with the number of sg entries pci_map_sg + * returns. + */ +#define sg_dma_address(sg) ((sg)->dma_address) +#define sg_dma_len(sg) ((sg)->length) + +#endif /* _ASM_SCATTERLIST_H */ diff --git a/arch/mn10300/include/asm/sections.h b/arch/mn10300/include/asm/sections.h new file mode 100644 index 00000000000..2b8c5160388 --- /dev/null +++ b/arch/mn10300/include/asm/sections.h @@ -0,0 +1 @@ +#include <asm-generic/sections.h> diff --git a/arch/mn10300/include/asm/sembuf.h b/arch/mn10300/include/asm/sembuf.h new file mode 100644 index 00000000000..301f3f9d8aa --- /dev/null +++ b/arch/mn10300/include/asm/sembuf.h @@ -0,0 +1,25 @@ +#ifndef _ASM_SEMBUF_H +#define _ASM_SEMBUF_H + +/* + * The semid64_ds structure for MN10300 architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct semid64_ds { + struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ + __kernel_time_t sem_otime; /* last semop time */ + unsigned long __unused1; + __kernel_time_t sem_ctime; /* last change time */ + unsigned long __unused2; + unsigned long sem_nsems; /* no. of semaphores in array */ + unsigned long __unused3; + unsigned long __unused4; +}; + +#endif /* _ASM_SEMBUF_H */ diff --git a/arch/mn10300/include/asm/serial-regs.h b/arch/mn10300/include/asm/serial-regs.h new file mode 100644 index 00000000000..6498469e93a --- /dev/null +++ b/arch/mn10300/include/asm/serial-regs.h @@ -0,0 +1,160 @@ +/* MN10300 on-board serial port module registers + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _ASM_SERIAL_REGS_H +#define _ASM_SERIAL_REGS_H + +#include <asm/cpu-regs.h> +#include <asm/intctl-regs.h> + +#ifdef __KERNEL__ + +/* serial port 0 */ +#define SC0CTR __SYSREG(0xd4002000, u16) /* control reg */ +#define SC01CTR_CK 0x0007 /* clock source select */ +#define SC0CTR_CK_TM8UFLOW_8 0x0000 /* - 1/8 timer 8 underflow (serial port 0 only) */ +#define SC1CTR_CK_TM9UFLOW_8 0x0000 /* - 1/8 timer 9 underflow (serial port 1 only) */ +#define SC01CTR_CK_IOCLK_8 0x0001 /* - 1/8 IOCLK */ +#define SC01CTR_CK_IOCLK_32 0x0002 /* - 1/32 IOCLK */ +#define SC0CTR_CK_TM2UFLOW_2 0x0003 /* - 1/2 timer 2 underflow (serial port 0 only) */ +#define SC1CTR_CK_TM3UFLOW_2 0x0003 /* - 1/2 timer 3 underflow (serial port 1 only) */ +#define SC0CTR_CK_TM0UFLOW_8 0x0004 /* - 1/8 timer 1 underflow (serial port 0 only) */ +#define SC1CTR_CK_TM1UFLOW_8 0x0004 /* - 1/8 timer 2 underflow (serial port 1 only) */ +#define SC0CTR_CK_TM2UFLOW_8 0x0005 /* - 1/8 timer 2 underflow (serial port 0 only) */ +#define SC1CTR_CK_TM3UFLOW_8 0x0005 /* - 1/8 timer 3 underflow (serial port 1 only) */ +#define SC01CTR_CK_EXTERN_8 0x0006 /* - 1/8 external closk */ +#define SC01CTR_CK_EXTERN 0x0007 /* - external closk */ +#define SC01CTR_STB 0x0008 /* stop bit select */ +#define SC01CTR_STB_1BIT 0x0000 /* - 1 stop bit */ +#define SC01CTR_STB_2BIT 0x0008 /* - 2 stop bits */ +#define SC01CTR_PB 0x0070 /* parity bit select */ +#define SC01CTR_PB_NONE 0x0000 /* - no parity */ +#define SC01CTR_PB_FIXED0 0x0040 /* - fixed at 0 */ +#define SC01CTR_PB_FIXED1 0x0050 /* - fixed at 1 */ +#define SC01CTR_PB_EVEN 0x0060 /* - even parity */ +#define SC01CTR_PB_ODD 0x0070 /* - odd parity */ +#define SC01CTR_CLN 0x0080 /* character length */ +#define SC01CTR_CLN_7BIT 0x0000 /* - 7 bit chars */ +#define SC01CTR_CLN_8BIT 0x0080 /* - 8 bit chars */ +#define SC01CTR_TOE 0x0100 /* T input output enable */ +#define SC01CTR_OD 0x0200 /* bit order select */ +#define SC01CTR_OD_LSBFIRST 0x0000 /* - LSB first */ +#define SC01CTR_OD_MSBFIRST 0x0200 /* - MSB first */ +#define SC01CTR_MD 0x0c00 /* mode select */ +#define SC01CTR_MD_STST_SYNC 0x0000 /* - start-stop synchronous */ +#define SC01CTR_MD_CLOCK_SYNC1 0x0400 /* - clock synchronous 1 */ +#define SC01CTR_MD_I2C 0x0800 /* - I2C mode */ +#define SC01CTR_MD_CLOCK_SYNC2 0x0c00 /* - clock synchronous 2 */ +#define SC01CTR_IIC 0x1000 /* I2C mode select */ +#define SC01CTR_BKE 0x2000 /* break transmit enable */ +#define SC01CTR_RXE 0x4000 /* receive enable */ +#define SC01CTR_TXE 0x8000 /* transmit enable */ + +#define SC0ICR __SYSREG(0xd4002004, u8) /* interrupt control reg */ +#define SC01ICR_DMD 0x80 /* output data mode */ +#define SC01ICR_TD 0x20 /* transmit DMA trigger cause */ +#define SC01ICR_TI 0x10 /* transmit interrupt cause */ +#define SC01ICR_RES 0x04 /* receive error select */ +#define SC01ICR_RI 0x01 /* receive interrupt cause */ + +#define SC0TXB __SYSREG(0xd4002008, u8) /* transmit buffer reg */ +#define SC0RXB __SYSREG(0xd4002009, u8) /* receive buffer reg */ + +#define SC0STR __SYSREG(0xd400200c, u16) /* status reg */ +#define SC01STR_OEF 0x0001 /* overrun error found */ +#define SC01STR_PEF 0x0002 /* parity error found */ +#define SC01STR_FEF 0x0004 /* framing error found */ +#define SC01STR_RBF 0x0010 /* receive buffer status */ +#define SC01STR_TBF 0x0020 /* transmit buffer status */ +#define SC01STR_RXF 0x0040 /* receive status */ +#define SC01STR_TXF 0x0080 /* transmit status */ +#define SC01STR_STF 0x0100 /* I2C start sequence found */ +#define SC01STR_SPF 0x0200 /* I2C stop sequence found */ + +#define SC0RXIRQ 20 /* timer 0 Receive IRQ */ +#define SC0TXIRQ 21 /* timer 0 Transmit IRQ */ + +#define SC0RXICR GxICR(SC0RXIRQ) /* serial 0 receive intr ctrl reg */ +#define SC0TXICR GxICR(SC0TXIRQ) /* serial 0 transmit intr ctrl reg */ + +/* serial port 1 */ +#define SC1CTR __SYSREG(0xd4002010, u16) /* serial port 1 control */ +#define SC1ICR __SYSREG(0xd4002014, u8) /* interrupt control reg */ +#define SC1TXB __SYSREG(0xd4002018, u8) /* transmit buffer reg */ +#define SC1RXB __SYSREG(0xd4002019, u8) /* receive buffer reg */ +#define SC1STR __SYSREG(0xd400201c, u16) /* status reg */ + +#define SC1RXIRQ 22 /* timer 1 Receive IRQ */ +#define SC1TXIRQ 23 /* timer 1 Transmit IRQ */ + +#define SC1RXICR GxICR(SC1RXIRQ) /* serial 1 receive intr ctrl reg */ +#define SC1TXICR GxICR(SC1TXIRQ) /* serial 1 transmit intr ctrl reg */ + +/* serial port 2 */ +#define SC2CTR __SYSREG(0xd4002020, u16) /* control reg */ +#define SC2CTR_CK 0x0003 /* clock source select */ +#define SC2CTR_CK_TM10UFLOW 0x0000 /* - timer 10 underflow */ +#define SC2CTR_CK_TM2UFLOW 0x0001 /* - timer 2 underflow */ +#define SC2CTR_CK_EXTERN 0x0002 /* - external closk */ +#define SC2CTR_CK_TM3UFLOW 0x0003 /* - timer 3 underflow */ +#define SC2CTR_STB 0x0008 /* stop bit select */ +#define SC2CTR_STB_1BIT 0x0000 /* - 1 stop bit */ +#define SC2CTR_STB_2BIT 0x0008 /* - 2 stop bits */ +#define SC2CTR_PB 0x0070 /* parity bit select */ +#define SC2CTR_PB_NONE 0x0000 /* - no parity */ +#define SC2CTR_PB_FIXED0 0x0040 /* - fixed at 0 */ +#define SC2CTR_PB_FIXED1 0x0050 /* - fixed at 1 */ +#define SC2CTR_PB_EVEN 0x0060 /* - even parity */ +#define SC2CTR_PB_ODD 0x0070 /* - odd parity */ +#define SC2CTR_CLN 0x0080 /* character length */ +#define SC2CTR_CLN_7BIT 0x0000 /* - 7 bit chars */ +#define SC2CTR_CLN_8BIT 0x0080 /* - 8 bit chars */ +#define SC2CTR_TWE 0x0100 /* transmit wait enable (enable XCTS control) */ +#define SC2CTR_OD 0x0200 /* bit order select */ +#define SC2CTR_OD_LSBFIRST 0x0000 /* - LSB first */ +#define SC2CTR_OD_MSBFIRST 0x0200 /* - MSB first */ +#define SC2CTR_TWS 0x1000 /* transmit wait select */ +#define SC2CTR_TWS_XCTS_HIGH 0x0000 /* - interrupt TX when XCTS high */ +#define SC2CTR_TWS_XCTS_LOW 0x1000 /* - interrupt TX when XCTS low */ +#define SC2CTR_BKE 0x2000 /* break transmit enable */ +#define SC2CTR_RXE 0x4000 /* receive enable */ +#define SC2CTR_TXE 0x8000 /* transmit enable */ + +#define SC2ICR __SYSREG(0xd4002024, u8) /* interrupt control reg */ +#define SC2ICR_TD 0x20 /* transmit DMA trigger cause */ +#define SC2ICR_TI 0x10 /* transmit interrupt cause */ +#define SC2ICR_RES 0x04 /* receive error select */ +#define SC2ICR_RI 0x01 /* receive interrupt cause */ + +#define SC2TXB __SYSREG(0xd4002018, u8) /* transmit buffer reg */ +#define SC2RXB __SYSREG(0xd4002019, u8) /* receive buffer reg */ +#define SC2STR __SYSREG(0xd400201c, u8) /* status reg */ +#define SC2STR_OEF 0x0001 /* overrun error found */ +#define SC2STR_PEF 0x0002 /* parity error found */ +#define SC2STR_FEF 0x0004 /* framing error found */ +#define SC2STR_CTS 0x0008 /* XCTS input pin status (0 means high) */ +#define SC2STR_RBF 0x0010 /* receive buffer status */ +#define SC2STR_TBF 0x0020 /* transmit buffer status */ +#define SC2STR_RXF 0x0040 /* receive status */ +#define SC2STR_TXF 0x0080 /* transmit status */ + +#define SC2TIM __SYSREG(0xd400202d, u8) /* status reg */ + +#define SC2RXIRQ 24 /* serial 2 Receive IRQ */ +#define SC2TXIRQ 25 /* serial 2 Transmit IRQ */ + +#define SC2RXICR GxICR(SC2RXIRQ) /* serial 2 receive intr ctrl reg */ +#define SC2TXICR GxICR(SC2TXIRQ) /* serial 2 transmit intr ctrl reg */ + + +#endif /* __KERNEL__ */ + +#endif /* _ASM_SERIAL_REGS_H */ diff --git a/arch/mn10300/include/asm/serial.h b/arch/mn10300/include/asm/serial.h new file mode 100644 index 00000000000..a29445cddd6 --- /dev/null +++ b/arch/mn10300/include/asm/serial.h @@ -0,0 +1,36 @@ +/* Standard UART definitions + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +/* + * The ASB2305 has an 18.432 MHz clock the UART + */ +#define BASE_BAUD (18432000 / 16) + +/* Standard COM flags (except for COM4, because of the 8514 problem) */ +#ifdef CONFIG_SERIAL_DETECT_IRQ +#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ) +#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ) +#else +#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST) +#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF +#endif + +#ifdef CONFIG_SERIAL_MANY_PORTS +#define FOURPORT_FLAGS ASYNC_FOURPORT +#define ACCENT_FLAGS 0 +#define BOCA_FLAGS 0 +#define HUB6_FLAGS 0 +#define RS_TABLE_SIZE 64 +#else +#define RS_TABLE_SIZE +#endif + +#include <unit/serial.h> diff --git a/arch/mn10300/include/asm/setup.h b/arch/mn10300/include/asm/setup.h new file mode 100644 index 00000000000..08356c83228 --- /dev/null +++ b/arch/mn10300/include/asm/setup.h @@ -0,0 +1,17 @@ +/* MN10300 Setup declarations + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_SETUP_H +#define _ASM_SETUP_H + +extern void __init unit_setup(void); +extern void __init unit_init_IRQ(void); + +#endif /* _ASM_SETUP_H */ diff --git a/arch/mn10300/include/asm/shmbuf.h b/arch/mn10300/include/asm/shmbuf.h new file mode 100644 index 00000000000..8f300cc35d6 --- /dev/null +++ b/arch/mn10300/include/asm/shmbuf.h @@ -0,0 +1,42 @@ +#ifndef _ASM_SHMBUF_H +#define _ASM_SHMBUF_H + +/* + * The shmid64_ds structure for MN10300 architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct shmid64_ds { + struct ipc64_perm shm_perm; /* operation perms */ + size_t shm_segsz; /* size of segment (bytes) */ + __kernel_time_t shm_atime; /* last attach time */ + unsigned long __unused1; + __kernel_time_t shm_dtime; /* last detach time */ + unsigned long __unused2; + __kernel_time_t shm_ctime; /* last change time */ + unsigned long __unused3; + __kernel_pid_t shm_cpid; /* pid of creator */ + __kernel_pid_t shm_lpid; /* pid of last operator */ + unsigned long shm_nattch; /* no. of current attaches */ + unsigned long __unused4; + unsigned long __unused5; +}; + +struct shminfo64 { + unsigned long shmmax; + unsigned long shmmin; + unsigned long shmmni; + unsigned long shmseg; + unsigned long shmall; + unsigned long __unused1; + unsigned long __unused2; + unsigned long __unused3; + unsigned long __unused4; +}; + +#endif /* _ASM_SHMBUF_H */ diff --git a/arch/mn10300/include/asm/shmparam.h b/arch/mn10300/include/asm/shmparam.h new file mode 100644 index 00000000000..ab666ed1a07 --- /dev/null +++ b/arch/mn10300/include/asm/shmparam.h @@ -0,0 +1,6 @@ +#ifndef _ASM_SHMPARAM_H +#define _ASM_SHMPARAM_H + +#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */ + +#endif /* _ASM_SHMPARAM_H */ diff --git a/arch/mn10300/include/asm/sigcontext.h b/arch/mn10300/include/asm/sigcontext.h new file mode 100644 index 00000000000..4de3afff4ad --- /dev/null +++ b/arch/mn10300/include/asm/sigcontext.h @@ -0,0 +1,52 @@ +/* MN10300 Userspace signal context + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_SIGCONTEXT_H +#define _ASM_SIGCONTEXT_H + +struct fpucontext { + /* Regular FPU environment */ + unsigned long fs[32]; /* fpu registers */ + unsigned long fpcr; /* fpu control register */ +}; + +struct sigcontext { + unsigned long d0; + unsigned long d1; + unsigned long d2; + unsigned long d3; + unsigned long a0; + unsigned long a1; + unsigned long a2; + unsigned long a3; + unsigned long e0; + unsigned long e1; + unsigned long e2; + unsigned long e3; + unsigned long e4; + unsigned long e5; + unsigned long e6; + unsigned long e7; + unsigned long lar; + unsigned long lir; + unsigned long mdr; + unsigned long mcvf; + unsigned long mcrl; + unsigned long mcrh; + unsigned long mdrq; + unsigned long sp; + unsigned long epsw; + unsigned long pc; + struct fpucontext *fpucontext; + unsigned long oldmask; +}; + + +#endif /* _ASM_SIGCONTEXT_H */ diff --git a/arch/mn10300/include/asm/siginfo.h b/arch/mn10300/include/asm/siginfo.h new file mode 100644 index 00000000000..0815d29d82e --- /dev/null +++ b/arch/mn10300/include/asm/siginfo.h @@ -0,0 +1 @@ +#include <asm-generic/siginfo.h> diff --git a/arch/mn10300/include/asm/signal.h b/arch/mn10300/include/asm/signal.h new file mode 100644 index 00000000000..e98817cec5f --- /dev/null +++ b/arch/mn10300/include/asm/signal.h @@ -0,0 +1,171 @@ +/* MN10300 Signal definitions + * + * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_SIGNAL_H +#define _ASM_SIGNAL_H + +#include <linux/types.h> + +/* Avoid too many header ordering problems. */ +struct siginfo; + +#ifdef __KERNEL__ +/* Most things should be clean enough to redefine this at will, if care + is taken to make libc match. */ + +#define _NSIG 64 +#define _NSIG_BPW 32 +#define _NSIG_WORDS (_NSIG / _NSIG_BPW) + +typedef unsigned long old_sigset_t; /* at least 32 bits */ + +typedef struct { + unsigned long sig[_NSIG_WORDS]; +} sigset_t; + +#else +/* Here we must cater to libcs that poke about in kernel headers. */ + +#define NSIG 32 +typedef unsigned long sigset_t; + +#endif /* __KERNEL__ */ + +#define SIGHUP 1 +#define SIGINT 2 +#define SIGQUIT 3 +#define SIGILL 4 +#define SIGTRAP 5 +#define SIGABRT 6 +#define SIGIOT 6 +#define SIGBUS 7 +#define SIGFPE 8 +#define SIGKILL 9 +#define SIGUSR1 10 +#define SIGSEGV 11 +#define SIGUSR2 12 +#define SIGPIPE 13 +#define SIGALRM 14 +#define SIGTERM 15 +#define SIGSTKFLT 16 +#define SIGCHLD 17 +#define SIGCONT 18 +#define SIGSTOP 19 +#define SIGTSTP 20 +#define SIGTTIN 21 +#define SIGTTOU 22 +#define SIGURG 23 +#define SIGXCPU 24 +#define SIGXFSZ 25 +#define SIGVTALRM 26 +#define SIGPROF 27 +#define SIGWINCH 28 +#define SIGIO 29 +#define SIGPOLL SIGIO +/* +#define SIGLOST 29 +*/ +#define SIGPWR 30 +#define SIGSYS 31 +#define SIGUNUSED 31 + +/* These should not be considered constants from userland. */ +#define SIGRTMIN 32 +#define SIGRTMAX (_NSIG-1) + +/* + * SA_FLAGS values: + * + * SA_ONSTACK indicates that a registered stack_t will be used. + * SA_RESTART flag to get restarting signals (which were the default long ago) + * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. + * SA_RESETHAND clears the handler when the signal is delivered. + * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. + * SA_NODEFER prevents the current signal from being masked in the handler. + * + * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single + * Unix names RESETHAND and NODEFER respectively. + */ +#define SA_NOCLDSTOP 0x00000001U +#define SA_NOCLDWAIT 0x00000002U +#define SA_SIGINFO 0x00000004U +#define SA_ONSTACK 0x08000000U +#define SA_RESTART 0x10000000U +#define SA_NODEFER 0x40000000U +#define SA_RESETHAND 0x80000000U + +#define SA_NOMASK SA_NODEFER +#define SA_ONESHOT SA_RESETHAND + +#define SA_RESTORER 0x04000000 + +/* + * sigaltstack controls + */ +#define SS_ONSTACK 1 +#define SS_DISABLE 2 + +#define MINSIGSTKSZ 2048 +#define SIGSTKSZ 8192 + +#include <asm-generic/signal.h> + +#ifdef __KERNEL__ +struct old_sigaction { + __sighandler_t sa_handler; + old_sigset_t sa_mask; + unsigned long sa_flags; + __sigrestore_t sa_restorer; +}; + +struct sigaction { + __sighandler_t sa_handler; + unsigned long sa_flags; + __sigrestore_t sa_restorer; + sigset_t sa_mask; /* mask last for extensibility */ +}; + +struct k_sigaction { + struct sigaction sa; +}; +#else +/* Here we must cater to libcs that poke about in kernel headers. */ + +struct sigaction { + union { + __sighandler_t _sa_handler; + void (*_sa_sigaction)(int, struct siginfo *, void *); + } _u; + sigset_t sa_mask; + unsigned long sa_flags; + void (*sa_restorer)(void); +}; + +#define sa_handler _u._sa_handler +#define sa_sigaction _u._sa_sigaction + +#endif /* __KERNEL__ */ + +typedef struct sigaltstack { + void __user *ss_sp; + int ss_flags; + size_t ss_size; +} stack_t; + +#ifdef __KERNEL__ +#include <asm/sigcontext.h> + + +struct pt_regs; +#define ptrace_signal_deliver(regs, cookie) do { } while (0) + +#endif /* __KERNEL__ */ + +#endif /* _ASM_SIGNAL_H */ diff --git a/arch/mn10300/include/asm/smp.h b/arch/mn10300/include/asm/smp.h new file mode 100644 index 00000000000..4eb8c61b7da --- /dev/null +++ b/arch/mn10300/include/asm/smp.h @@ -0,0 +1,18 @@ +/* MN10300 SMP support + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_SMP_H +#define _ASM_SMP_H + +#ifdef CONFIG_SMP +#error SMP not yet supported for MN10300 +#endif + +#endif diff --git a/arch/mn10300/include/asm/socket.h b/arch/mn10300/include/asm/socket.h new file mode 100644 index 00000000000..fb5daf438ec --- /dev/null +++ b/arch/mn10300/include/asm/socket.h @@ -0,0 +1,60 @@ +#ifndef _ASM_SOCKET_H +#define _ASM_SOCKET_H + +#include <asm/sockios.h> + +/* For setsockopt(2) */ +#define SOL_SOCKET 1 + +#define SO_DEBUG 1 +#define SO_REUSEADDR 2 +#define SO_TYPE 3 +#define SO_ERROR 4 +#define SO_DONTROUTE 5 +#define SO_BROADCAST 6 +#define SO_SNDBUF 7 +#define SO_RCVBUF 8 +#define SO_SNDBUFFORCE 32 +#define SO_RCVBUFFORCE 33 +#define SO_KEEPALIVE 9 +#define SO_OOBINLINE 10 +#define SO_NO_CHECK 11 +#define SO_PRIORITY 12 +#define SO_LINGER 13 +#define SO_BSDCOMPAT 14 +/* To add :#define SO_REUSEPORT 15 */ +#define SO_PASSCRED 16 +#define SO_PEERCRED 17 +#define SO_RCVLOWAT 18 +#define SO_SNDLOWAT 19 +#define SO_RCVTIMEO 20 +#define SO_SNDTIMEO 21 + +/* Security levels - as per NRL IPv6 - don't actually do anything */ +#define SO_SECURITY_AUTHENTICATION 22 +#define SO_SECURITY_ENCRYPTION_TRANSPORT 23 +#define SO_SECURITY_ENCRYPTION_NETWORK 24 + +#define SO_BINDTODEVICE 25 + +/* Socket filtering */ +#define SO_ATTACH_FILTER 26 +#define SO_DETACH_FILTER 27 + +#define SO_PEERNAME 28 +#define SO_TIMESTAMP 29 +#define SCM_TIMESTAMP SO_TIMESTAMP + +#define SO_ACCEPTCONN 30 + +#define SO_PEERSEC 31 +#define SO_PASSSEC 34 +#define SO_TIMESTAMPNS 35 +#define SCM_TIMESTAMPNS SO_TIMESTAMPNS + +#define SO_MARK 36 + +#define SO_TIMESTAMPING 37 +#define SCM_TIMESTAMPING SO_TIMESTAMPING + +#endif /* _ASM_SOCKET_H */ diff --git a/arch/mn10300/include/asm/sockios.h b/arch/mn10300/include/asm/sockios.h new file mode 100644 index 00000000000..b03043a1c56 --- /dev/null +++ b/arch/mn10300/include/asm/sockios.h @@ -0,0 +1,13 @@ +#ifndef _ASM_SOCKIOS_H +#define _ASM_SOCKIOS_H + +/* Socket-level I/O control calls. */ +#define FIOSETOWN 0x8901 +#define SIOCSPGRP 0x8902 +#define FIOGETOWN 0x8903 +#define SIOCGPGRP 0x8904 +#define SIOCATMARK 0x8905 +#define SIOCGSTAMP 0x8906 /* Get stamp */ +#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */ + +#endif /* _ASM_SOCKIOS_H */ diff --git a/arch/mn10300/include/asm/spinlock.h b/arch/mn10300/include/asm/spinlock.h new file mode 100644 index 00000000000..4bf9c8b169e --- /dev/null +++ b/arch/mn10300/include/asm/spinlock.h @@ -0,0 +1,16 @@ +/* MN10300 spinlock support + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_SPINLOCK_H +#define _ASM_SPINLOCK_H + +#error SMP spinlocks not implemented for MN10300 + +#endif /* _ASM_SPINLOCK_H */ diff --git a/arch/mn10300/include/asm/stat.h b/arch/mn10300/include/asm/stat.h new file mode 100644 index 00000000000..63ff8371cf2 --- /dev/null +++ b/arch/mn10300/include/asm/stat.h @@ -0,0 +1,78 @@ +#ifndef _ASM_STAT_H +#define _ASM_STAT_H + +struct __old_kernel_stat { + unsigned short st_dev; + unsigned short st_ino; + unsigned short st_mode; + unsigned short st_nlink; + unsigned short st_uid; + unsigned short st_gid; + unsigned short st_rdev; + unsigned long st_size; + unsigned long st_atime; + unsigned long st_mtime; + unsigned long st_ctime; +}; + +struct stat { + unsigned long st_dev; + unsigned long st_ino; + unsigned short st_mode; + unsigned short st_nlink; + unsigned short st_uid; + unsigned short st_gid; + unsigned long st_rdev; + unsigned long st_size; + unsigned long st_blksize; + unsigned long st_blocks; + unsigned long st_atime; + unsigned long st_atime_nsec; + unsigned long st_mtime; + unsigned long st_mtime_nsec; + unsigned long st_ctime; + unsigned long st_ctime_nsec; + unsigned long __unused4; + unsigned long __unused5; +}; + +/* This matches struct stat64 in glibc2.1, hence the absolutely + * insane amounts of padding around dev_t's. + */ +struct stat64 { + unsigned long long st_dev; + unsigned char __pad0[4]; + +#define STAT64_HAS_BROKEN_ST_INO 1 + unsigned long __st_ino; + + unsigned int st_mode; + unsigned int st_nlink; + + unsigned long st_uid; + unsigned long st_gid; + + unsigned long long st_rdev; + unsigned char __pad3[4]; + + long long st_size; + unsigned long st_blksize; + + unsigned long st_blocks; /* Number 512-byte blocks allocated. */ + unsigned long __pad4; /* future possible st_blocks high bits */ + + unsigned long st_atime; + unsigned long st_atime_nsec; + + unsigned long st_mtime; + unsigned int st_mtime_nsec; + + unsigned long st_ctime; + unsigned long st_ctime_nsec; + + unsigned long long st_ino; +}; + +#define STAT_HAVE_NSEC 1 + +#endif /* _ASM_STAT_H */ diff --git a/arch/mn10300/include/asm/statfs.h b/arch/mn10300/include/asm/statfs.h new file mode 100644 index 00000000000..0b91fe198c2 --- /dev/null +++ b/arch/mn10300/include/asm/statfs.h @@ -0,0 +1 @@ +#include <asm-generic/statfs.h> diff --git a/arch/mn10300/include/asm/string.h b/arch/mn10300/include/asm/string.h new file mode 100644 index 00000000000..47dbd4346c3 --- /dev/null +++ b/arch/mn10300/include/asm/string.h @@ -0,0 +1,32 @@ +/* MN10300 Optimised string functions + * + * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Modified by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_STRING_H +#define _ASM_STRING_H + +#define __HAVE_ARCH_MEMSET +#define __HAVE_ARCH_MEMCPY +#define __HAVE_ARCH_MEMMOVE + +extern void *memset(void *dest, int ch, size_t count); +extern void *memcpy(void *dest, const void *src, size_t count); +extern void *memmove(void *dest, const void *src, size_t count); + + +extern void __struct_cpy_bug(void); +#define struct_cpy(x, y) \ +({ \ + if (sizeof(*(x)) != sizeof(*(y))) \ + __struct_cpy_bug; \ + memcpy(x, y, sizeof(*(x))); \ +}) + +#endif /* _ASM_STRING_H */ diff --git a/arch/mn10300/include/asm/swab.h b/arch/mn10300/include/asm/swab.h new file mode 100644 index 00000000000..bd818a820ca --- /dev/null +++ b/arch/mn10300/include/asm/swab.h @@ -0,0 +1,42 @@ +/* MN10300 Byte-order primitive construction + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_SWAB_H +#define _ASM_SWAB_H + +#include <linux/types.h> + +#ifdef __GNUC__ + +static inline __attribute__((const)) +__u32 __arch_swab32(__u32 x) +{ + __u32 ret; + asm("swap %1,%0" : "=r" (ret) : "r" (x)); + return ret; +} +#define __arch_swab32 __arch_swab32 + +static inline __attribute__((const)) +__u16 __arch_swab16(__u16 x) +{ + __u16 ret; + asm("swaph %1,%0" : "=r" (ret) : "r" (x)); + return ret; +} +#define __arch_swab32 __arch_swab32 + +#if !defined(__STRICT_ANSI__) || defined(__KERNEL__) +# define __SWAB_64_THRU_32__ +#endif + +#endif /* __GNUC__ */ + +#endif /* _ASM_SWAB_H */ diff --git a/arch/mn10300/include/asm/system.h b/arch/mn10300/include/asm/system.h new file mode 100644 index 00000000000..8214fb7e7fe --- /dev/null +++ b/arch/mn10300/include/asm/system.h @@ -0,0 +1,237 @@ +/* MN10300 System definitions + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_SYSTEM_H +#define _ASM_SYSTEM_H + +#include <asm/cpu-regs.h> + +#ifdef __KERNEL__ +#ifndef __ASSEMBLY__ + +#include <linux/kernel.h> + +struct task_struct; +struct thread_struct; + +extern asmlinkage +struct task_struct *__switch_to(struct thread_struct *prev, + struct thread_struct *next, + struct task_struct *prev_task); + +/* context switching is now performed out-of-line in switch_to.S */ +#define switch_to(prev, next, last) \ +do { \ + current->thread.wchan = (u_long) __builtin_return_address(0); \ + (last) = __switch_to(&(prev)->thread, &(next)->thread, (prev)); \ + mb(); \ + current->thread.wchan = 0; \ +} while (0) + +#define arch_align_stack(x) (x) + +#define nop() asm volatile ("nop") + +#endif /* !__ASSEMBLY__ */ + +/* + * Force strict CPU ordering. + * And yes, this is required on UP too when we're talking + * to devices. + * + * For now, "wmb()" doesn't actually do anything, as all + * Intel CPU's follow what Intel calls a *Processor Order*, + * in which all writes are seen in the program order even + * outside the CPU. + * + * I expect future Intel CPU's to have a weaker ordering, + * but I'd also expect them to finally get their act together + * and add some real memory barriers if so. + * + * Some non intel clones support out of order store. wmb() ceases to be a + * nop for these. + */ + +#define mb() asm volatile ("": : :"memory") +#define rmb() mb() +#define wmb() asm volatile ("": : :"memory") + +#ifdef CONFIG_SMP +#define smp_mb() mb() +#define smp_rmb() rmb() +#define smp_wmb() wmb() +#else +#define smp_mb() barrier() +#define smp_rmb() barrier() +#define smp_wmb() barrier() +#endif + +#define set_mb(var, value) do { var = value; mb(); } while (0) +#define set_wmb(var, value) do { var = value; wmb(); } while (0) + +#define read_barrier_depends() do {} while (0) +#define smp_read_barrier_depends() do {} while (0) + +/*****************************************************************************/ +/* + * interrupt control + * - "disabled": run in IM1/2 + * - level 0 - GDB stub + * - level 1 - virtual serial DMA (if present) + * - level 5 - normal interrupt priority + * - level 6 - timer interrupt + * - "enabled": run in IM7 + */ +#ifdef CONFIG_MN10300_TTYSM +#define MN10300_CLI_LEVEL EPSW_IM_2 +#else +#define MN10300_CLI_LEVEL EPSW_IM_1 +#endif + +#define local_save_flags(x) \ +do { \ + typecheck(unsigned long, x); \ + asm volatile( \ + " mov epsw,%0 \n" \ + : "=d"(x) \ + ); \ +} while (0) + +#define local_irq_disable() \ +do { \ + asm volatile( \ + " and %0,epsw \n" \ + " or %1,epsw \n" \ + " nop \n" \ + " nop \n" \ + " nop \n" \ + : \ + : "i"(~EPSW_IM), "i"(EPSW_IE | MN10300_CLI_LEVEL) \ + ); \ +} while (0) + +#define local_irq_save(x) \ +do { \ + local_save_flags(x); \ + local_irq_disable(); \ +} while (0) + +/* + * we make sure local_irq_enable() doesn't cause priority inversion + */ +#ifndef __ASSEMBLY__ + +extern unsigned long __mn10300_irq_enabled_epsw; + +#endif + +#define local_irq_enable() \ +do { \ + unsigned long tmp; \ + \ + asm volatile( \ + " mov epsw,%0 \n" \ + " and %1,%0 \n" \ + " or %2,%0 \n" \ + " mov %0,epsw \n" \ + : "=&d"(tmp) \ + : "i"(~EPSW_IM), "r"(__mn10300_irq_enabled_epsw) \ + ); \ +} while (0) + +#define local_irq_restore(x) \ +do { \ + typecheck(unsigned long, x); \ + asm volatile( \ + " mov %0,epsw \n" \ + " nop \n" \ + " nop \n" \ + " nop \n" \ + : \ + : "d"(x) \ + : "memory", "cc" \ + ); \ +} while (0) + +#define irqs_disabled() \ +({ \ + unsigned long flags; \ + local_save_flags(flags); \ + (flags & EPSW_IM) <= MN10300_CLI_LEVEL; \ +}) + +/* hook to save power by halting the CPU + * - called from the idle loop + * - must reenable interrupts (which takes three instruction cycles to complete) + */ +#define safe_halt() \ +do { \ + asm volatile(" or %0,epsw \n" \ + " nop \n" \ + " nop \n" \ + " bset %2,(%1) \n" \ + : \ + : "i"(EPSW_IE|EPSW_IM), "n"(&CPUM), "i"(CPUM_SLEEP)\ + : "cc" \ + ); \ +} while (0) + +#define STI or EPSW_IE|EPSW_IM,epsw +#define CLI and ~EPSW_IM,epsw; or EPSW_IE|MN10300_CLI_LEVEL,epsw; nop; nop; nop + +/*****************************************************************************/ +/* + * MN10300 doesn't actually have an exchange instruction + */ +#ifndef __ASSEMBLY__ + +struct __xchg_dummy { unsigned long a[100]; }; +#define __xg(x) ((struct __xchg_dummy *)(x)) + +static inline +unsigned long __xchg(volatile unsigned long *m, unsigned long val) +{ + unsigned long retval; + unsigned long flags; + + local_irq_save(flags); + retval = *m; + *m = val; + local_irq_restore(flags); + return retval; +} + +#define xchg(ptr, v) \ + ((__typeof__(*(ptr))) __xchg((unsigned long *)(ptr), \ + (unsigned long)(v))) + +static inline unsigned long __cmpxchg(volatile unsigned long *m, + unsigned long old, unsigned long new) +{ + unsigned long retval; + unsigned long flags; + + local_irq_save(flags); + retval = *m; + if (retval == old) + *m = new; + local_irq_restore(flags); + return retval; +} + +#define cmpxchg(ptr, o, n) \ + ((__typeof__(*(ptr))) __cmpxchg((unsigned long *)(ptr), \ + (unsigned long)(o), \ + (unsigned long)(n))) + +#endif /* !__ASSEMBLY__ */ + +#endif /* __KERNEL__ */ +#endif /* _ASM_SYSTEM_H */ diff --git a/arch/mn10300/include/asm/termbits.h b/arch/mn10300/include/asm/termbits.h new file mode 100644 index 00000000000..eb2b0dc1f69 --- /dev/null +++ b/arch/mn10300/include/asm/termbits.h @@ -0,0 +1,200 @@ +#ifndef _ASM_TERMBITS_H +#define _ASM_TERMBITS_H + +#include <linux/posix_types.h> + +typedef unsigned char cc_t; +typedef unsigned int speed_t; +typedef unsigned int tcflag_t; + +#define NCCS 19 +struct termios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ +}; + +struct termios2 { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + +struct ktermios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + +/* c_cc characters */ +#define VINTR 0 +#define VQUIT 1 +#define VERASE 2 +#define VKILL 3 +#define VEOF 4 +#define VTIME 5 +#define VMIN 6 +#define VSWTC 7 +#define VSTART 8 +#define VSTOP 9 +#define VSUSP 10 +#define VEOL 11 +#define VREPRINT 12 +#define VDISCARD 13 +#define VWERASE 14 +#define VLNEXT 15 +#define VEOL2 16 + + +/* c_iflag bits */ +#define IGNBRK 0000001 +#define BRKINT 0000002 +#define IGNPAR 0000004 +#define PARMRK 0000010 +#define INPCK 0000020 +#define ISTRIP 0000040 +#define INLCR 0000100 +#define IGNCR 0000200 +#define ICRNL 0000400 +#define IUCLC 0001000 +#define IXON 0002000 +#define IXANY 0004000 +#define IXOFF 0010000 +#define IMAXBEL 0020000 +#define IUTF8 0040000 + +/* c_oflag bits */ +#define OPOST 0000001 +#define OLCUC 0000002 +#define ONLCR 0000004 +#define OCRNL 0000010 +#define ONOCR 0000020 +#define ONLRET 0000040 +#define OFILL 0000100 +#define OFDEL 0000200 +#define NLDLY 0000400 +#define NL0 0000000 +#define NL1 0000400 +#define CRDLY 0003000 +#define CR0 0000000 +#define CR1 0001000 +#define CR2 0002000 +#define CR3 0003000 +#define TABDLY 0014000 +#define TAB0 0000000 +#define TAB1 0004000 +#define TAB2 0010000 +#define TAB3 0014000 +#define XTABS 0014000 +#define BSDLY 0020000 +#define BS0 0000000 +#define BS1 0020000 +#define VTDLY 0040000 +#define VT0 0000000 +#define VT1 0040000 +#define FFDLY 0100000 +#define FF0 0000000 +#define FF1 0100000 + +/* c_cflag bit meaning */ +#define CBAUD 0010017 +#define B0 0000000 /* hang up */ +#define B50 0000001 +#define B75 0000002 +#define B110 0000003 +#define B134 0000004 +#define B150 0000005 +#define B200 0000006 +#define B300 0000007 +#define B600 0000010 +#define B1200 0000011 +#define B1800 0000012 +#define B2400 0000013 +#define B4800 0000014 +#define B9600 0000015 +#define B19200 0000016 +#define B38400 0000017 +#define EXTA B19200 +#define EXTB B38400 +#define CSIZE 0000060 +#define CS5 0000000 +#define CS6 0000020 +#define CS7 0000040 +#define CS8 0000060 +#define CSTOPB 0000100 +#define CREAD 0000200 +#define PARENB 0000400 +#define PARODD 0001000 +#define HUPCL 0002000 +#define CLOCAL 0004000 +#define CBAUDEX 0010000 +#define BOTHER 0010000 +#define B57600 0010001 +#define B115200 0010002 +#define B230400 0010003 +#define B460800 0010004 +#define B500000 0010005 +#define B576000 0010006 +#define B921600 0010007 +#define B1000000 0010010 +#define B1152000 0010011 +#define B1500000 0010012 +#define B2000000 0010013 +#define B2500000 0010014 +#define B3000000 0010015 +#define B3500000 0010016 +#define B4000000 0010017 +#define CIBAUD 002003600000 /* input baud rate (not used) */ +#define CTVB 004000000000 /* VisioBraille Terminal flow control */ +#define CMSPAR 010000000000 /* mark or space (stick) parity */ +#define CRTSCTS 020000000000 /* flow control */ + +#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ + +/* c_lflag bits */ +#define ISIG 0000001 +#define ICANON 0000002 +#define XCASE 0000004 +#define ECHO 0000010 +#define ECHOE 0000020 +#define ECHOK 0000040 +#define ECHONL 0000100 +#define NOFLSH 0000200 +#define TOSTOP 0000400 +#define ECHOCTL 0001000 +#define ECHOPRT 0002000 +#define ECHOKE 0004000 +#define FLUSHO 0010000 +#define PENDIN 0040000 +#define IEXTEN 0100000 + +/* tcflow() and TCXONC use these */ +#define TCOOFF 0 +#define TCOON 1 +#define TCIOFF 2 +#define TCION 3 + +/* tcflush() and TCFLSH use these */ +#define TCIFLUSH 0 +#define TCOFLUSH 1 +#define TCIOFLUSH 2 + +/* tcsetattr uses these */ +#define TCSANOW 0 +#define TCSADRAIN 1 +#define TCSAFLUSH 2 + +#endif /* _ASM_TERMBITS_H */ diff --git a/arch/mn10300/include/asm/termios.h b/arch/mn10300/include/asm/termios.h new file mode 100644 index 00000000000..dd7cf617e11 --- /dev/null +++ b/arch/mn10300/include/asm/termios.h @@ -0,0 +1,92 @@ +#ifndef _ASM_TERMIOS_H +#define _ASM_TERMIOS_H + +#include <asm/termbits.h> +#include <asm/ioctls.h> + +struct winsize { + unsigned short ws_row; + unsigned short ws_col; + unsigned short ws_xpixel; + unsigned short ws_ypixel; +}; + +#define NCC 8 +struct termio { + unsigned short c_iflag; /* input mode flags */ + unsigned short c_oflag; /* output mode flags */ + unsigned short c_cflag; /* control mode flags */ + unsigned short c_lflag; /* local mode flags */ + unsigned char c_line; /* line discipline */ + unsigned char c_cc[NCC]; /* control characters */ +}; + +#ifdef __KERNEL__ +/* intr=^C quit=^| erase=del kill=^U + eof=^D vtime=\0 vmin=\1 sxtc=\0 + start=^Q stop=^S susp=^Z eol=\0 + reprint=^R discard=^U werase=^W lnext=^V + eol2=\0 +*/ +#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0" +#endif + +/* modem lines */ +#define TIOCM_LE 0x001 +#define TIOCM_DTR 0x002 +#define TIOCM_RTS 0x004 +#define TIOCM_ST 0x008 +#define TIOCM_SR 0x010 +#define TIOCM_CTS 0x020 +#define TIOCM_CAR 0x040 +#define TIOCM_RNG 0x080 +#define TIOCM_DSR 0x100 +#define TIOCM_CD TIOCM_CAR +#define TIOCM_RI TIOCM_RNG +#define TIOCM_OUT1 0x2000 +#define TIOCM_OUT2 0x4000 +#define TIOCM_LOOP 0x8000 + +#define TIOCM_MODEM_BITS TIOCM_OUT2 /* IRDA support */ + +/* + * Translate a "termio" structure into a "termios". Ugh. + */ +#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \ + unsigned short __tmp; \ + get_user(__tmp, &(termio)->x); \ + *(unsigned short *) &(termios)->x = __tmp; \ +} + +#define user_termio_to_kernel_termios(termios, termio) \ +({ \ + SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \ + SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \ + SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \ + SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \ + copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \ +}) + +/* + * Translate a "termios" structure into a "termio". Ugh. + */ +#define kernel_termios_to_user_termio(termio, termios) \ +({ \ + put_user((termios)->c_iflag, &(termio)->c_iflag); \ + put_user((termios)->c_oflag, &(termio)->c_oflag); \ + put_user((termios)->c_cflag, &(termio)->c_cflag); \ + put_user((termios)->c_lflag, &(termio)->c_lflag); \ + put_user((termios)->c_line, &(termio)->c_line); \ + copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \ +}) + +#define user_termios_to_kernel_termios(k, u) \ + copy_from_user(k, u, sizeof(struct termios2)) +#define kernel_termios_to_user_termios(u, k) \ + copy_to_user(u, k, sizeof(struct termios2)) +#define user_termios_to_kernel_termios_1(k, u) \ + copy_from_user(k, u, sizeof(struct termios)) +#define kernel_termios_to_user_termios_1(u, k) \ + copy_to_user(u, k, sizeof(struct termios)) + +#endif /* _ASM_TERMIOS_H */ diff --git a/arch/mn10300/include/asm/thread_info.h b/arch/mn10300/include/asm/thread_info.h new file mode 100644 index 00000000000..78a3881f3c1 --- /dev/null +++ b/arch/mn10300/include/asm/thread_info.h @@ -0,0 +1,170 @@ +/* MN10300 Low-level thread information + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _ASM_THREAD_INFO_H +#define _ASM_THREAD_INFO_H + +#ifdef __KERNEL__ + +#include <asm/page.h> + +#ifndef __ASSEMBLY__ +#include <asm/processor.h> +#endif + +#define PREEMPT_ACTIVE 0x10000000 + +#ifdef CONFIG_4KSTACKS +#define THREAD_SIZE (4096) +#else +#define THREAD_SIZE (8192) +#endif + +#define STACK_WARN (THREAD_SIZE / 8) + +/* + * low level task data that entry.S needs immediate access to + * - this struct should fit entirely inside of one cache line + * - this struct shares the supervisor stack pages + * - if the contents of this structure are changed, the assembly constants + * must also be changed + */ +#ifndef __ASSEMBLY__ + +struct thread_info { + struct task_struct *task; /* main task structure */ + struct exec_domain *exec_domain; /* execution domain */ + unsigned long flags; /* low level flags */ + __u32 cpu; /* current CPU */ + __s32 preempt_count; /* 0 => preemptable, <0 => BUG */ + + mm_segment_t addr_limit; /* thread address space: + 0-0xBFFFFFFF for user-thead + 0-0xFFFFFFFF for kernel-thread + */ + struct restart_block restart_block; + + __u8 supervisor_stack[0]; +}; + +#else /* !__ASSEMBLY__ */ + +#ifndef __ASM_OFFSETS_H__ +#include <asm/asm-offsets.h> +#endif + +#endif + +/* + * macros/functions for gaining access to the thread information structure + * + * preempt_count needs to be 1 initially, until the scheduler is functional. + */ +#ifndef __ASSEMBLY__ + +#define INIT_THREAD_INFO(tsk) \ +{ \ + .task = &tsk, \ + .exec_domain = &default_exec_domain, \ + .flags = 0, \ + .cpu = 0, \ + .preempt_count = 1, \ + .addr_limit = KERNEL_DS, \ + .restart_block = { \ + .fn = do_no_restart_syscall, \ + }, \ +} + +#define init_thread_info (init_thread_union.thread_info) +#define init_stack (init_thread_union.stack) +#define init_uregs \ + ((struct pt_regs *) \ + ((unsigned long) init_stack + THREAD_SIZE - sizeof(struct pt_regs))) + +extern struct thread_info *__current_ti; + +/* how to get the thread information struct from C */ +static inline __attribute__((const)) +struct thread_info *current_thread_info(void) +{ + struct thread_info *ti; + asm("mov sp,%0\n" + "and %1,%0\n" + : "=d" (ti) + : "i" (~(THREAD_SIZE - 1)) + : "cc"); + return ti; +} + +/* how to get the current stack pointer from C */ +static inline unsigned long current_stack_pointer(void) +{ + unsigned long sp; + asm("mov sp,%0; ":"=r" (sp)); + return sp; +} + +#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR + +/* thread information allocation */ +#ifdef CONFIG_DEBUG_STACK_USAGE +#define alloc_thread_info(tsk) kzalloc(THREAD_SIZE, GFP_KERNEL) +#else +#define alloc_thread_info(tsk) kmalloc(THREAD_SIZE, GFP_KERNEL) +#endif + +#define free_thread_info(ti) kfree((ti)) +#define get_thread_info(ti) get_task_struct((ti)->task) +#define put_thread_info(ti) put_task_struct((ti)->task) + +#else /* !__ASSEMBLY__ */ + +#ifndef __VMLINUX_LDS__ +/* how to get the thread information struct from ASM */ +.macro GET_THREAD_INFO reg + mov sp,\reg + and -THREAD_SIZE,\reg +.endm +#endif +#endif + +/* + * thread information flags + * - these are process state flags that various assembly files may need to + * access + * - pending work-to-be-done flags are in LSW + * - other flags in MSW + */ +#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ +#define TIF_NOTIFY_RESUME 1 /* resumption notification requested */ +#define TIF_SIGPENDING 2 /* signal pending */ +#define TIF_NEED_RESCHED 3 /* rescheduling necessary */ +#define TIF_SINGLESTEP 4 /* restore singlestep on return to user mode */ +#define TIF_RESTORE_SIGMASK 5 /* restore signal mask in do_signal() */ +#define TIF_POLLING_NRFLAG 16 /* true if poll_idle() is polling TIF_NEED_RESCHED */ +#define TIF_MEMDIE 17 /* OOM killer killed process */ +#define TIF_FREEZE 18 /* freezing for suspend */ + +#define _TIF_SYSCALL_TRACE +(1 << TIF_SYSCALL_TRACE) +#define _TIF_NOTIFY_RESUME +(1 << TIF_NOTIFY_RESUME) +#define _TIF_SIGPENDING +(1 << TIF_SIGPENDING) +#define _TIF_NEED_RESCHED +(1 << TIF_NEED_RESCHED) +#define _TIF_SINGLESTEP +(1 << TIF_SINGLESTEP) +#define _TIF_RESTORE_SIGMASK +(1 << TIF_RESTORE_SIGMASK) +#define _TIF_POLLING_NRFLAG +(1 << TIF_POLLING_NRFLAG) +#define _TIF_FREEZE +(1 << TIF_FREEZE) + +#define _TIF_WORK_MASK 0x0000FFFE /* work to do on interrupt/exception return */ +#define _TIF_ALLWORK_MASK 0x0000FFFF /* work to do on any return to u-space */ + +#endif /* __KERNEL__ */ + +#endif /* _ASM_THREAD_INFO_H */ diff --git a/arch/mn10300/include/asm/timer-regs.h b/arch/mn10300/include/asm/timer-regs.h new file mode 100644 index 00000000000..1d883b7f94a --- /dev/null +++ b/arch/mn10300/include/asm/timer-regs.h @@ -0,0 +1,293 @@ +/* AM33v2 on-board timer module registers + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _ASM_TIMER_REGS_H +#define _ASM_TIMER_REGS_H + +#include <asm/cpu-regs.h> +#include <asm/intctl-regs.h> + +#ifdef __KERNEL__ + +/* timer prescalar control */ +#define TMPSCNT __SYSREG(0xd4003071, u8) /* timer prescaler control */ +#define TMPSCNT_ENABLE 0x80 /* timer prescaler enable */ +#define TMPSCNT_DISABLE 0x00 /* timer prescaler disable */ + +/* 8 bit timers */ +#define TM0MD __SYSREG(0xd4003000, u8) /* timer 0 mode register */ +#define TM0MD_SRC 0x07 /* timer source */ +#define TM0MD_SRC_IOCLK 0x00 /* - IOCLK */ +#define TM0MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ +#define TM0MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ +#define TM0MD_SRC_TM2IO 0x03 /* - TM2IO pin input */ +#define TM0MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ +#define TM0MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#define TM0MD_SRC_TM0IO 0x07 /* - TM0IO pin input */ +#define TM0MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ +#define TM0MD_COUNT_ENABLE 0x80 /* timer count enable */ + +#define TM1MD __SYSREG(0xd4003001, u8) /* timer 1 mode register */ +#define TM1MD_SRC 0x07 /* timer source */ +#define TM1MD_SRC_IOCLK 0x00 /* - IOCLK */ +#define TM1MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ +#define TM1MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ +#define TM1MD_SRC_TM0CASCADE 0x03 /* - cascade with timer 0 */ +#define TM1MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ +#define TM1MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#define TM1MD_SRC_TM1IO 0x07 /* - TM1IO pin input */ +#define TM1MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ +#define TM1MD_COUNT_ENABLE 0x80 /* timer count enable */ + +#define TM2MD __SYSREG(0xd4003002, u8) /* timer 2 mode register */ +#define TM2MD_SRC 0x07 /* timer source */ +#define TM2MD_SRC_IOCLK 0x00 /* - IOCLK */ +#define TM2MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ +#define TM2MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ +#define TM2MD_SRC_TM1CASCADE 0x03 /* - cascade with timer 1 */ +#define TM2MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ +#define TM2MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ +#define TM2MD_SRC_TM2IO 0x07 /* - TM2IO pin input */ +#define TM2MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ +#define TM2MD_COUNT_ENABLE 0x80 /* timer count enable */ + +#define TM3MD __SYSREG(0xd4003003, u8) /* timer 3 mode register */ +#define TM3MD_SRC 0x07 /* timer source */ +#define TM3MD_SRC_IOCLK 0x00 /* - IOCLK */ +#define TM3MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ +#define TM3MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ +#define TM3MD_SRC_TM1CASCADE 0x03 /* - cascade with timer 2 */ +#define TM3MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ +#define TM3MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ +#define TM3MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#define TM3MD_SRC_TM3IO 0x07 /* - TM3IO pin input */ +#define TM3MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ +#define TM3MD_COUNT_ENABLE 0x80 /* timer count enable */ + +#define TM01MD __SYSREG(0xd4003000, u16) /* timer 0:1 mode register */ + +#define TM0BR __SYSREG(0xd4003010, u8) /* timer 0 base register */ +#define TM1BR __SYSREG(0xd4003011, u8) /* timer 1 base register */ +#define TM2BR __SYSREG(0xd4003012, u8) /* timer 2 base register */ +#define TM3BR __SYSREG(0xd4003013, u8) /* timer 3 base register */ +#define TM01BR __SYSREG(0xd4003010, u16) /* timer 0:1 base register */ + +#define TM0BC __SYSREGC(0xd4003020, u8) /* timer 0 binary counter */ +#define TM1BC __SYSREGC(0xd4003021, u8) /* timer 1 binary counter */ +#define TM2BC __SYSREGC(0xd4003022, u8) /* timer 2 binary counter */ +#define TM3BC __SYSREGC(0xd4003023, u8) /* timer 3 binary counter */ +#define TM01BC __SYSREGC(0xd4003020, u16) /* timer 0:1 binary counter */ + +#define TM0IRQ 2 /* timer 0 IRQ */ +#define TM1IRQ 3 /* timer 1 IRQ */ +#define TM2IRQ 4 /* timer 2 IRQ */ +#define TM3IRQ 5 /* timer 3 IRQ */ + +#define TM0ICR GxICR(TM0IRQ) /* timer 0 uflow intr ctrl reg */ +#define TM1ICR GxICR(TM1IRQ) /* timer 1 uflow intr ctrl reg */ +#define TM2ICR GxICR(TM2IRQ) /* timer 2 uflow intr ctrl reg */ +#define TM3ICR GxICR(TM3IRQ) /* timer 3 uflow intr ctrl reg */ + +/* 16-bit timers 4,5 & 7-11 */ +#define TM4MD __SYSREG(0xd4003080, u8) /* timer 4 mode register */ +#define TM4MD_SRC 0x07 /* timer source */ +#define TM4MD_SRC_IOCLK 0x00 /* - IOCLK */ +#define TM4MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ +#define TM4MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ +#define TM4MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ +#define TM4MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ +#define TM4MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#define TM4MD_SRC_TM4IO 0x07 /* - TM4IO pin input */ +#define TM4MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ +#define TM4MD_COUNT_ENABLE 0x80 /* timer count enable */ + +#define TM5MD __SYSREG(0xd4003082, u8) /* timer 5 mode register */ +#define TM5MD_SRC 0x07 /* timer source */ +#define TM5MD_SRC_IOCLK 0x00 /* - IOCLK */ +#define TM5MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ +#define TM5MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ +#define TM5MD_SRC_TM4CASCADE 0x03 /* - cascade with timer 4 */ +#define TM5MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ +#define TM5MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ +#define TM5MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#define TM5MD_SRC_TM5IO 0x07 /* - TM5IO pin input */ +#define TM5MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ +#define TM5MD_COUNT_ENABLE 0x80 /* timer count enable */ + +#define TM7MD __SYSREG(0xd4003086, u8) /* timer 7 mode register */ +#define TM7MD_SRC 0x07 /* timer source */ +#define TM7MD_SRC_IOCLK 0x00 /* - IOCLK */ +#define TM7MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ +#define TM7MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ +#define TM7MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ +#define TM7MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ +#define TM7MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#define TM7MD_SRC_TM7IO 0x07 /* - TM7IO pin input */ +#define TM7MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ +#define TM7MD_COUNT_ENABLE 0x80 /* timer count enable */ + +#define TM8MD __SYSREG(0xd4003088, u8) /* timer 8 mode register */ +#define TM8MD_SRC 0x07 /* timer source */ +#define TM8MD_SRC_IOCLK 0x00 /* - IOCLK */ +#define TM8MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ +#define TM8MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ +#define TM8MD_SRC_TM7CASCADE 0x03 /* - cascade with timer 7 */ +#define TM8MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ +#define TM8MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ +#define TM8MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#define TM8MD_SRC_TM8IO 0x07 /* - TM8IO pin input */ +#define TM8MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ +#define TM8MD_COUNT_ENABLE 0x80 /* timer count enable */ + +#define TM9MD __SYSREG(0xd400308a, u8) /* timer 9 mode register */ +#define TM9MD_SRC 0x07 /* timer source */ +#define TM9MD_SRC_IOCLK 0x00 /* - IOCLK */ +#define TM9MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ +#define TM9MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ +#define TM9MD_SRC_TM8CASCADE 0x03 /* - cascade with timer 8 */ +#define TM9MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ +#define TM9MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ +#define TM9MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#define TM9MD_SRC_TM9IO 0x07 /* - TM9IO pin input */ +#define TM9MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ +#define TM9MD_COUNT_ENABLE 0x80 /* timer count enable */ + +#define TM10MD __SYSREG(0xd400308c, u8) /* timer 10 mode register */ +#define TM10MD_SRC 0x07 /* timer source */ +#define TM10MD_SRC_IOCLK 0x00 /* - IOCLK */ +#define TM10MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ +#define TM10MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ +#define TM10MD_SRC_TM9CASCADE 0x03 /* - cascade with timer 9 */ +#define TM10MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ +#define TM10MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ +#define TM10MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#define TM10MD_SRC_TM10IO 0x07 /* - TM10IO pin input */ +#define TM10MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ +#define TM10MD_COUNT_ENABLE 0x80 /* timer count enable */ + +#define TM11MD __SYSREG(0xd400308e, u8) /* timer 11 mode register */ +#define TM11MD_SRC 0x07 /* timer source */ +#define TM11MD_SRC_IOCLK 0x00 /* - IOCLK */ +#define TM11MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ +#define TM11MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ +#define TM11MD_SRC_TM7CASCADE 0x03 /* - cascade with timer 7 */ +#define TM11MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ +#define TM11MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ +#define TM11MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#define TM11MD_SRC_TM11IO 0x07 /* - TM11IO pin input */ +#define TM11MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ +#define TM11MD_COUNT_ENABLE 0x80 /* timer count enable */ + +#define TM4BR __SYSREG(0xd4003090, u16) /* timer 4 base register */ +#define TM5BR __SYSREG(0xd4003092, u16) /* timer 5 base register */ +#define TM7BR __SYSREG(0xd4003096, u16) /* timer 7 base register */ +#define TM8BR __SYSREG(0xd4003098, u16) /* timer 8 base register */ +#define TM9BR __SYSREG(0xd400309a, u16) /* timer 9 base register */ +#define TM10BR __SYSREG(0xd400309c, u16) /* timer 10 base register */ +#define TM11BR __SYSREG(0xd400309e, u16) /* timer 11 base register */ +#define TM45BR __SYSREG(0xd4003090, u32) /* timer 4:5 base register */ + +#define TM4BC __SYSREG(0xd40030a0, u16) /* timer 4 binary counter */ +#define TM5BC __SYSREG(0xd40030a2, u16) /* timer 5 binary counter */ +#define TM45BC __SYSREG(0xd40030a0, u32) /* timer 4:5 binary counter */ + +#define TM7BC __SYSREG(0xd40030a6, u16) /* timer 7 binary counter */ +#define TM8BC __SYSREG(0xd40030a8, u16) /* timer 8 binary counter */ +#define TM9BC __SYSREG(0xd40030aa, u16) /* timer 9 binary counter */ +#define TM10BC __SYSREG(0xd40030ac, u16) /* timer 10 binary counter */ +#define TM11BC __SYSREG(0xd40030ae, u16) /* timer 11 binary counter */ + +#define TM4IRQ 6 /* timer 4 IRQ */ +#define TM5IRQ 7 /* timer 5 IRQ */ +#define TM7IRQ 11 /* timer 7 IRQ */ +#define TM8IRQ 12 /* timer 8 IRQ */ +#define TM9IRQ 13 /* timer 9 IRQ */ +#define TM10IRQ 14 /* timer 10 IRQ */ +#define TM11IRQ 15 /* timer 11 IRQ */ + +#define TM4ICR GxICR(TM4IRQ) /* timer 4 uflow intr ctrl reg */ +#define TM5ICR GxICR(TM5IRQ) /* timer 5 uflow intr ctrl reg */ +#define TM7ICR GxICR(TM7IRQ) /* timer 7 uflow intr ctrl reg */ +#define TM8ICR GxICR(TM8IRQ) /* timer 8 uflow intr ctrl reg */ +#define TM9ICR GxICR(TM9IRQ) /* timer 9 uflow intr ctrl reg */ +#define TM10ICR GxICR(TM10IRQ) /* timer 10 uflow intr ctrl reg */ +#define TM11ICR GxICR(TM11IRQ) /* timer 11 uflow intr ctrl reg */ + +/* 16-bit timer 6 */ +#define TM6MD __SYSREG(0xd4003084, u16) /* timer6 mode register */ +#define TM6MD_SRC 0x0007 /* timer source */ +#define TM6MD_SRC_IOCLK 0x0000 /* - IOCLK */ +#define TM6MD_SRC_IOCLK_8 0x0001 /* - 1/8 IOCLK */ +#define TM6MD_SRC_IOCLK_32 0x0002 /* - 1/32 IOCLK */ +#define TM6MD_SRC_TM0UFLOW 0x0004 /* - timer 0 underflow */ +#define TM6MD_SRC_TM1UFLOW 0x0005 /* - timer 1 underflow */ +#define TM6MD_SRC_TM6IOB_BOTH 0x0006 /* - TM6IOB pin input (both edges) */ +#define TM6MD_SRC_TM6IOB_SINGLE 0x0007 /* - TM6IOB pin input (single edge) */ +#define TM6MD_CLR_ENABLE 0x0010 /* clear count enable */ +#define TM6MD_ONESHOT_ENABLE 0x0040 /* oneshot count */ +#define TM6MD_TRIG_ENABLE 0x0080 /* TM6IOB pin trigger enable */ +#define TM6MD_PWM 0x3800 /* PWM output mode */ +#define TM6MD_PWM_DIS 0x0000 /* - disabled */ +#define TM6MD_PWM_10BIT 0x1000 /* - 10 bits mode */ +#define TM6MD_PWM_11BIT 0x1800 /* - 11 bits mode */ +#define TM6MD_PWM_12BIT 0x3000 /* - 12 bits mode */ +#define TM6MD_PWM_14BIT 0x3800 /* - 14 bits mode */ +#define TM6MD_INIT_COUNTER 0x4000 /* initialize TMnBC to zero */ +#define TM6MD_COUNT_ENABLE 0x8000 /* timer count enable */ + +#define TM6MDA __SYSREG(0xd40030b4, u8) /* timer6 cmp/cap A mode reg */ +#define TM6MDA_OUT 0x07 /* output select */ +#define TM6MDA_OUT_SETA_RESETB 0x00 /* - set at match A, reset at match B */ +#define TM6MDA_OUT_SETA_RESETOV 0x01 /* - set at match A, reset at overflow */ +#define TM6MDA_OUT_SETA 0x02 /* - set at match A */ +#define TM6MDA_OUT_RESETA 0x03 /* - reset at match A */ +#define TM6MDA_OUT_TOGGLE 0x04 /* - toggle on match A */ +#define TM6MDA_MODE 0xc0 /* compare A register mode */ +#define TM6MDA_MODE_CMP_SINGLE 0x00 /* - compare, single buffer mode */ +#define TM6MDA_MODE_CMP_DOUBLE 0x40 /* - compare, double buffer mode */ +#define TM6MDA_MODE_CAP_S_EDGE 0x80 /* - capture, single edge mode */ +#define TM6MDA_MODE_CAP_D_EDGE 0xc0 /* - capture, double edge mode */ +#define TM6MDA_EDGE 0x20 /* compare A edge select */ +#define TM6MDA_EDGE_FALLING 0x00 /* capture on falling edge */ +#define TM6MDA_EDGE_RISING 0x20 /* capture on rising edge */ +#define TM6MDA_CAPTURE_ENABLE 0x10 /* capture enable */ + +#define TM6MDB __SYSREG(0xd40030b5, u8) /* timer6 cmp/cap B mode reg */ +#define TM6MDB_OUT 0x07 /* output select */ +#define TM6MDB_OUT_SETB_RESETA 0x00 /* - set at match B, reset at match A */ +#define TM6MDB_OUT_SETB_RESETOV 0x01 /* - set at match B */ +#define TM6MDB_OUT_RESETB 0x03 /* - reset at match B */ +#define TM6MDB_OUT_TOGGLE 0x04 /* - toggle on match B */ +#define TM6MDB_MODE 0xc0 /* compare B register mode */ +#define TM6MDB_MODE_CMP_SINGLE 0x00 /* - compare, single buffer mode */ +#define TM6MDB_MODE_CMP_DOUBLE 0x40 /* - compare, double buffer mode */ +#define TM6MDB_MODE_CAP_S_EDGE 0x80 /* - capture, single edge mode */ +#define TM6MDB_MODE_CAP_D_EDGE 0xc0 /* - capture, double edge mode */ +#define TM6MDB_EDGE 0x20 /* compare B edge select */ +#define TM6MDB_EDGE_FALLING 0x00 /* capture on falling edge */ +#define TM6MDB_EDGE_RISING 0x20 /* capture on rising edge */ +#define TM6MDB_CAPTURE_ENABLE 0x10 /* capture enable */ + +#define TM6CA __SYSREG(0xd40030c4, u16) /* timer6 cmp/capture reg A */ +#define TM6CB __SYSREG(0xd40030d4, u16) /* timer6 cmp/capture reg B */ +#define TM6BC __SYSREG(0xd40030a4, u16) /* timer6 binary counter */ + +#define TM6IRQ 6 /* timer 6 IRQ */ +#define TM6AIRQ 9 /* timer 6A IRQ */ +#define TM6BIRQ 10 /* timer 6B IRQ */ + +#define TM6ICR GxICR(TM6IRQ) /* timer 6 uflow intr ctrl reg */ +#define TM6AICR GxICR(TM6AIRQ) /* timer 6A intr control reg */ +#define TM6BICR GxICR(TM6BIRQ) /* timer 6B intr control reg */ + +#endif /* __KERNEL__ */ + +#endif /* _ASM_TIMER_REGS_H */ diff --git a/arch/mn10300/include/asm/timex.h b/arch/mn10300/include/asm/timex.h new file mode 100644 index 00000000000..8d031f9e117 --- /dev/null +++ b/arch/mn10300/include/asm/timex.h @@ -0,0 +1,33 @@ +/* MN10300 Architecture time management specifications + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_TIMEX_H +#define _ASM_TIMEX_H + +#include <asm/hardirq.h> +#include <unit/timex.h> + +#define TICK_SIZE (tick_nsec / 1000) + +#define CLOCK_TICK_RATE 1193180 /* Underlying HZ - this should probably be set + * to something appropriate, but what? */ + +extern cycles_t cacheflush_time; + +#ifdef __KERNEL__ + +static inline cycles_t get_cycles(void) +{ + return read_timestamp_counter(); +} + +#endif /* __KERNEL__ */ + +#endif /* _ASM_TIMEX_H */ diff --git a/arch/mn10300/include/asm/tlb.h b/arch/mn10300/include/asm/tlb.h new file mode 100644 index 00000000000..65d232b9661 --- /dev/null +++ b/arch/mn10300/include/asm/tlb.h @@ -0,0 +1,34 @@ +/* MN10300 TLB definitions + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _ASM_TLB_H +#define _ASM_TLB_H + +#include <asm/tlbflush.h> + +extern void check_pgt_cache(void); + +/* + * we don't need any special per-pte or per-vma handling... + */ +#define tlb_start_vma(tlb, vma) do { } while (0) +#define tlb_end_vma(tlb, vma) do { } while (0) +#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0) + +/* + * .. because we flush the whole mm when it fills up + */ +#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm) + +/* for now, just use the generic stuff */ +#include <asm-generic/tlb.h> + +#endif /* _ASM_TLB_H */ diff --git a/arch/mn10300/include/asm/tlbflush.h b/arch/mn10300/include/asm/tlbflush.h new file mode 100644 index 00000000000..e0239865abc --- /dev/null +++ b/arch/mn10300/include/asm/tlbflush.h @@ -0,0 +1,80 @@ +/* MN10300 TLB flushing functions + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_TLBFLUSH_H +#define _ASM_TLBFLUSH_H + +#include <asm/processor.h> + +#define __flush_tlb() \ +do { \ + int w; \ + __asm__ __volatile__ \ + (" mov %1,%0 \n" \ + " or %2,%0 \n" \ + " mov %0,%1 \n" \ + : "=d"(w) \ + : "m"(MMUCTR), "i"(MMUCTR_IIV|MMUCTR_DIV) \ + : "memory" \ + ); \ +} while (0) + +#define __flush_tlb_all() __flush_tlb() +#define __flush_tlb_one(addr) __flush_tlb() + + +/* + * TLB flushing: + * + * - flush_tlb() flushes the current mm struct TLBs + * - flush_tlb_all() flushes all processes TLBs + * - flush_tlb_mm(mm) flushes the specified mm context TLB's + * - flush_tlb_page(vma, vmaddr) flushes one page + * - flush_tlb_range(mm, start, end) flushes a range of pages + * - flush_tlb_pgtables(mm, start, end) flushes a range of page tables + */ +#define flush_tlb_all() \ +do { \ + preempt_disable(); \ + __flush_tlb_all(); \ + preempt_enable(); \ +} while (0) + +#define flush_tlb_mm(mm) \ +do { \ + preempt_disable(); \ + __flush_tlb_all(); \ + preempt_enable(); \ +} while (0) + +#define flush_tlb_range(vma, start, end) \ +do { \ + unsigned long __s __attribute__((unused)) = (start); \ + unsigned long __e __attribute__((unused)) = (end); \ + preempt_disable(); \ + __flush_tlb_all(); \ + preempt_enable(); \ +} while (0) + + +#define __flush_tlb_global() flush_tlb_all() +#define flush_tlb() flush_tlb_all() +#define flush_tlb_kernel_range(start, end) \ +do { \ + unsigned long __s __attribute__((unused)) = (start); \ + unsigned long __e __attribute__((unused)) = (end); \ + flush_tlb_all(); \ +} while (0) + +extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr); + +#define flush_tlb_pgtables(mm, start, end) do {} while (0) + +#endif /* _ASM_TLBFLUSH_H */ diff --git a/arch/mn10300/include/asm/topology.h b/arch/mn10300/include/asm/topology.h new file mode 100644 index 00000000000..5428f333a02 --- /dev/null +++ b/arch/mn10300/include/asm/topology.h @@ -0,0 +1 @@ +#include <asm-generic/topology.h> diff --git a/arch/mn10300/include/asm/types.h b/arch/mn10300/include/asm/types.h new file mode 100644 index 00000000000..7b9f01042fd --- /dev/null +++ b/arch/mn10300/include/asm/types.h @@ -0,0 +1,38 @@ +/* MN10300 Basic type definitions + * + * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_TYPES_H +#define _ASM_TYPES_H + +#include <asm-generic/int-ll64.h> + +#ifndef __ASSEMBLY__ + +typedef unsigned short umode_t; + +#endif /* __ASSEMBLY__ */ + +/* + * These aren't exported outside the kernel to avoid name space clashes + */ +#ifdef __KERNEL__ + +#define BITS_PER_LONG 32 + +#ifndef __ASSEMBLY__ + +/* Dma addresses are 32-bits wide. */ +typedef u32 dma_addr_t; + +#endif /* __ASSEMBLY__ */ + +#endif /* __KERNEL__ */ + +#endif /* _ASM_TYPES_H */ diff --git a/arch/mn10300/include/asm/uaccess.h b/arch/mn10300/include/asm/uaccess.h new file mode 100644 index 00000000000..8a3a4dd5576 --- /dev/null +++ b/arch/mn10300/include/asm/uaccess.h @@ -0,0 +1,490 @@ +/* MN10300 userspace access functions + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_UACCESS_H +#define _ASM_UACCESS_H + +/* + * User space memory access functions + */ +#include <linux/sched.h> +#include <asm/page.h> +#include <asm/pgtable.h> +#include <asm/errno.h> + +#define VERIFY_READ 0 +#define VERIFY_WRITE 1 + +/* + * The fs value determines whether argument validity checking should be + * performed or not. If get_fs() == USER_DS, checking is performed, with + * get_fs() == KERNEL_DS, checking is bypassed. + * + * For historical reasons, these macros are grossly misnamed. + */ + +#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) + +#define KERNEL_XDS MAKE_MM_SEG(0xBFFFFFFF) +#define KERNEL_DS MAKE_MM_SEG(0x9FFFFFFF) +#define USER_DS MAKE_MM_SEG(TASK_SIZE) + +#define get_ds() (KERNEL_DS) +#define get_fs() (current_thread_info()->addr_limit) +#define set_fs(x) (current_thread_info()->addr_limit = (x)) +#define __kernel_ds_p() (current_thread_info()->addr_limit.seg == 0x9FFFFFFF) + +#define segment_eq(a, b) ((a).seg == (b).seg) + +#define __addr_ok(addr) \ + ((unsigned long)(addr) < (current_thread_info()->addr_limit.seg)) + +/* + * check that a range of addresses falls within the current address limit + */ +static inline int ___range_ok(unsigned long addr, unsigned int size) +{ + int flag = 1, tmp; + + asm(" add %3,%1 \n" /* set C-flag if addr + size > 4Gb */ + " bcs 0f \n" + " cmp %4,%1 \n" /* jump if addr+size>limit (error) */ + " bhi 0f \n" + " clr %0 \n" /* mark okay */ + "0: \n" + : "=r"(flag), "=&r"(tmp) + : "1"(addr), "ir"(size), + "r"(current_thread_info()->addr_limit.seg), "0"(flag) + : "cc" + ); + + return flag; +} + +#define __range_ok(addr, size) ___range_ok((unsigned long)(addr), (u32)(size)) + +#define access_ok(type, addr, size) (__range_ok((addr), (size)) == 0) +#define __access_ok(addr, size) (__range_ok((addr), (size)) == 0) + +static inline int verify_area(int type, const void *addr, unsigned long size) +{ + return access_ok(type, addr, size) ? 0 : -EFAULT; +} + + +/* + * The exception table consists of pairs of addresses: the first is the + * address of an instruction that is allowed to fault, and the second is + * the address at which the program should continue. No registers are + * modified, so it is entirely up to the continuation code to figure out + * what to do. + * + * All the routines below use bits of fixup code that are out of line + * with the main instruction path. This means when everything is well, + * we don't even have to jump over them. Further, they do not intrude + * on our cache or tlb entries. + */ + +struct exception_table_entry +{ + unsigned long insn, fixup; +}; + +/* Returns 0 if exception not found and fixup otherwise. */ +extern int fixup_exception(struct pt_regs *regs); + +#define put_user(x, ptr) __put_user_check((x), (ptr), sizeof(*(ptr))) +#define get_user(x, ptr) __get_user_check((x), (ptr), sizeof(*(ptr))) + +/* + * The "__xxx" versions do not do address space checking, useful when + * doing multiple accesses to the same area (the user has to do the + * checks by hand with "access_ok()") + */ +#define __put_user(x, ptr) __put_user_nocheck((x), (ptr), sizeof(*(ptr))) +#define __get_user(x, ptr) __get_user_nocheck((x), (ptr), sizeof(*(ptr))) + +/* + * The "xxx_ret" versions return constant specified in third argument, if + * something bad happens. These macros can be optimized for the + * case of just returning from the function xxx_ret is used. + */ + +#define put_user_ret(x, ptr, ret) \ + ({ if (put_user((x), (ptr))) return (ret); }) +#define get_user_ret(x, ptr, ret) \ + ({ if (get_user((x), (ptr))) return (ret); }) +#define __put_user_ret(x, ptr, ret) \ + ({ if (__put_user((x), (ptr))) return (ret); }) +#define __get_user_ret(x, ptr, ret) \ + ({ if (__get_user((x), (ptr))) return (ret); }) + +struct __large_struct { unsigned long buf[100]; }; +#define __m(x) (*(struct __large_struct *)(x)) + +#define __get_user_nocheck(x, ptr, size) \ +({ \ + __typeof(*(ptr)) __gu_val; \ + unsigned long __gu_addr; \ + int __gu_err; \ + __gu_addr = (unsigned long) (ptr); \ + switch (size) { \ + case 1: __get_user_asm("bu"); break; \ + case 2: __get_user_asm("hu"); break; \ + case 4: __get_user_asm("" ); break; \ + default: __get_user_unknown(); break; \ + } \ + x = (__typeof__(*(ptr))) __gu_val; \ + __gu_err; \ +}) + +#define __get_user_check(x, ptr, size) \ +({ \ + __typeof__(*(ptr)) __gu_val; \ + unsigned long __gu_addr; \ + int __gu_err; \ + __gu_addr = (unsigned long) (ptr); \ + if (likely(__access_ok(__gu_addr,size))) { \ + switch (size) { \ + case 1: __get_user_asm("bu"); break; \ + case 2: __get_user_asm("hu"); break; \ + case 4: __get_user_asm("" ); break; \ + default: __get_user_unknown(); break; \ + } \ + } \ + else { \ + __gu_err = -EFAULT; \ + __gu_val = 0; \ + } \ + x = (__typeof__(*(ptr))) __gu_val; \ + __gu_err; \ +}) + +#define __get_user_asm(INSN) \ +({ \ + asm volatile( \ + "1:\n" \ + " mov"INSN" %2,%1\n" \ + " mov 0,%0\n" \ + "2:\n" \ + " .section .fixup,\"ax\"\n" \ + "3:\n\t" \ + " mov %3,%0\n" \ + " jmp 2b\n" \ + " .previous\n" \ + " .section __ex_table,\"a\"\n" \ + " .balign 4\n" \ + " .long 1b, 3b\n" \ + " .previous" \ + : "=&r" (__gu_err), "=&r" (__gu_val) \ + : "m" (__m(__gu_addr)), "i" (-EFAULT)); \ +}) + +extern int __get_user_unknown(void); + +#define __put_user_nocheck(x, ptr, size) \ +({ \ + union { \ + __typeof__(*(ptr)) val; \ + u32 bits[2]; \ + } __pu_val; \ + unsigned long __pu_addr; \ + int __pu_err; \ + __pu_val.val = (x); \ + __pu_addr = (unsigned long) (ptr); \ + switch (size) { \ + case 1: __put_user_asm("bu"); break; \ + case 2: __put_user_asm("hu"); break; \ + case 4: __put_user_asm("" ); break; \ + case 8: __put_user_asm8(); break; \ + default: __pu_err = __put_user_unknown(); break; \ + } \ + __pu_err; \ +}) + +#define __put_user_check(x, ptr, size) \ +({ \ + union { \ + __typeof__(*(ptr)) val; \ + u32 bits[2]; \ + } __pu_val; \ + unsigned long __pu_addr; \ + int __pu_err; \ + __pu_val.val = (x); \ + __pu_addr = (unsigned long) (ptr); \ + if (likely(__access_ok(__pu_addr, size))) { \ + switch (size) { \ + case 1: __put_user_asm("bu"); break; \ + case 2: __put_user_asm("hu"); break; \ + case 4: __put_user_asm("" ); break; \ + case 8: __put_user_asm8(); break; \ + default: __pu_err = __put_user_unknown(); break; \ + } \ + } \ + else { \ + __pu_err = -EFAULT; \ + } \ + __pu_err; \ +}) + +#define __put_user_asm(INSN) \ +({ \ + asm volatile( \ + "1:\n" \ + " mov"INSN" %1,%2\n" \ + " mov 0,%0\n" \ + "2:\n" \ + " .section .fixup,\"ax\"\n" \ + "3:\n" \ + " mov %3,%0\n" \ + " jmp 2b\n" \ + " .previous\n" \ + " .section __ex_table,\"a\"\n" \ + " .balign 4\n" \ + " .long 1b, 3b\n" \ + " .previous" \ + : "=&r" (__pu_err) \ + : "r" (__pu_val.val), "m" (__m(__pu_addr)), \ + "i" (-EFAULT) \ + ); \ +}) + +#define __put_user_asm8() \ +({ \ + asm volatile( \ + "1: mov %1,%3 \n" \ + "2: mov %2,%4 \n" \ + " mov 0,%0 \n" \ + "3: \n" \ + " .section .fixup,\"ax\" \n" \ + "4: \n" \ + " mov %5,%0 \n" \ + " jmp 3b \n" \ + " .previous \n" \ + " .section __ex_table,\"a\"\n" \ + " .balign 4 \n" \ + " .long 1b, 4b \n" \ + " .long 2b, 4b \n" \ + " .previous \n" \ + : "=&r" (__pu_err) \ + : "r" (__pu_val.bits[0]), "r" (__pu_val.bits[1]), \ + "m" (__m(__pu_addr)), "m" (__m(__pu_addr+4)), \ + "i" (-EFAULT) \ + ); \ +}) + +extern int __put_user_unknown(void); + + +/* + * Copy To/From Userspace + */ +/* Generic arbitrary sized copy. */ +#define __copy_user(to, from, size) \ +do { \ + if (size) { \ + void *__to = to; \ + const void *__from = from; \ + int w; \ + asm volatile( \ + "0: movbu (%0),%3;\n" \ + "1: movbu %3,(%1);\n" \ + " inc %0;\n" \ + " inc %1;\n" \ + " add -1,%2;\n" \ + " bne 0b;\n" \ + "2:\n" \ + " .section .fixup,\"ax\"\n" \ + "3: jmp 2b\n" \ + " .previous\n" \ + " .section __ex_table,\"a\"\n" \ + " .balign 4\n" \ + " .long 0b,3b\n" \ + " .long 1b,3b\n" \ + " .previous\n" \ + : "=a"(__from), "=a"(__to), "=r"(size), "=&r"(w)\ + : "0"(__from), "1"(__to), "2"(size) \ + : "memory"); \ + } \ +} while (0) + +#define __copy_user_zeroing(to, from, size) \ +do { \ + if (size) { \ + void *__to = to; \ + const void *__from = from; \ + int w; \ + asm volatile( \ + "0: movbu (%0),%3;\n" \ + "1: movbu %3,(%1);\n" \ + " inc %0;\n" \ + " inc %1;\n" \ + " add -1,%2;\n" \ + " bne 0b;\n" \ + "2:\n" \ + " .section .fixup,\"ax\"\n" \ + "3:\n" \ + " mov %2,%0\n" \ + " clr %3\n" \ + "4: movbu %3,(%1);\n" \ + " inc %1;\n" \ + " add -1,%2;\n" \ + " bne 4b;\n" \ + " mov %0,%2\n" \ + " jmp 2b\n" \ + " .previous\n" \ + " .section __ex_table,\"a\"\n" \ + " .balign 4\n" \ + " .long 0b,3b\n" \ + " .long 1b,3b\n" \ + " .previous\n" \ + : "=a"(__from), "=a"(__to), "=r"(size), "=&r"(w)\ + : "0"(__from), "1"(__to), "2"(size) \ + : "memory"); \ + } \ +} while (0) + +/* We let the __ versions of copy_from/to_user inline, because they're often + * used in fast paths and have only a small space overhead. + */ +static inline +unsigned long __generic_copy_from_user_nocheck(void *to, const void *from, + unsigned long n) +{ + __copy_user_zeroing(to, from, n); + return n; +} + +static inline +unsigned long __generic_copy_to_user_nocheck(void *to, const void *from, + unsigned long n) +{ + __copy_user(to, from, n); + return n; +} + + +#if 0 +#error don't use - these macros don't increment to & from pointers +/* Optimize just a little bit when we know the size of the move. */ +#define __constant_copy_user(to, from, size) \ +do { \ + asm volatile( \ + " mov %0,a0;\n" \ + "0: movbu (%1),d3;\n" \ + "1: movbu d3,(%2);\n" \ + " add -1,a0;\n" \ + " bne 0b;\n" \ + "2:;" \ + ".section .fixup,\"ax\"\n" \ + "3: jmp 2b\n" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n" \ + " .balign 4\n" \ + " .long 0b,3b\n" \ + " .long 1b,3b\n" \ + ".previous" \ + : \ + : "d"(size), "d"(to), "d"(from) \ + : "d3", "a0"); \ +} while (0) + +/* Optimize just a little bit when we know the size of the move. */ +#define __constant_copy_user_zeroing(to, from, size) \ +do { \ + asm volatile( \ + " mov %0,a0;\n" \ + "0: movbu (%1),d3;\n" \ + "1: movbu d3,(%2);\n" \ + " add -1,a0;\n" \ + " bne 0b;\n" \ + "2:;" \ + ".section .fixup,\"ax\"\n" \ + "3: jmp 2b\n" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n" \ + " .balign 4\n" \ + " .long 0b,3b\n" \ + " .long 1b,3b\n" \ + ".previous" \ + : \ + : "d"(size), "d"(to), "d"(from) \ + : "d3", "a0"); \ +} while (0) + +static inline +unsigned long __constant_copy_to_user(void *to, const void *from, + unsigned long n) +{ + if (access_ok(VERIFY_WRITE, to, n)) + __constant_copy_user(to, from, n); + return n; +} + +static inline +unsigned long __constant_copy_from_user(void *to, const void *from, + unsigned long n) +{ + if (access_ok(VERIFY_READ, from, n)) + __constant_copy_user_zeroing(to, from, n); + return n; +} + +static inline +unsigned long __constant_copy_to_user_nocheck(void *to, const void *from, + unsigned long n) +{ + __constant_copy_user(to, from, n); + return n; +} + +static inline +unsigned long __constant_copy_from_user_nocheck(void *to, const void *from, + unsigned long n) +{ + __constant_copy_user_zeroing(to, from, n); + return n; +} +#endif + +extern unsigned long __generic_copy_to_user(void __user *, const void *, + unsigned long); +extern unsigned long __generic_copy_from_user(void *, const void __user *, + unsigned long); + +#define __copy_to_user_inatomic(to, from, n) \ + __generic_copy_to_user_nocheck((to), (from), (n)) +#define __copy_from_user_inatomic(to, from, n) \ + __generic_copy_from_user_nocheck((to), (from), (n)) + +#define __copy_to_user(to, from, n) \ +({ \ + might_sleep(); \ + __copy_to_user_inatomic((to), (from), (n)); \ +}) + +#define __copy_from_user(to, from, n) \ +({ \ + might_sleep(); \ + __copy_from_user_inatomic((to), (from), (n)); \ +}) + + +#define copy_to_user(to, from, n) __generic_copy_to_user((to), (from), (n)) +#define copy_from_user(to, from, n) __generic_copy_from_user((to), (from), (n)) + +extern long strncpy_from_user(char *dst, const char __user *src, long count); +extern long __strncpy_from_user(char *dst, const char __user *src, long count); +extern long strnlen_user(const char __user *str, long n); +#define strlen_user(str) strnlen_user(str, ~0UL >> 1) +extern unsigned long clear_user(void __user *mem, unsigned long len); +extern unsigned long __clear_user(void __user *mem, unsigned long len); + +#endif /* _ASM_UACCESS_H */ diff --git a/arch/mn10300/include/asm/ucontext.h b/arch/mn10300/include/asm/ucontext.h new file mode 100644 index 00000000000..fcab5c1d8e1 --- /dev/null +++ b/arch/mn10300/include/asm/ucontext.h @@ -0,0 +1,22 @@ +/* MN10300 User context + * + * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_UCONTEXT_H +#define _ASM_UCONTEXT_H + +struct ucontext { + unsigned long uc_flags; + struct ucontext *uc_link; + stack_t uc_stack; + struct sigcontext uc_mcontext; + sigset_t uc_sigmask; /* mask last for extensibility */ +}; + +#endif /* _ASM_UCONTEXT_H */ diff --git a/arch/mn10300/include/asm/unaligned.h b/arch/mn10300/include/asm/unaligned.h new file mode 100644 index 00000000000..0df671318ae --- /dev/null +++ b/arch/mn10300/include/asm/unaligned.h @@ -0,0 +1,20 @@ +/* MN10300 Unaligned memory access handling + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_MN10300_UNALIGNED_H +#define _ASM_MN10300_UNALIGNED_H + +#include <linux/unaligned/access_ok.h> +#include <linux/unaligned/generic.h> + +#define get_unaligned __get_unaligned_le +#define put_unaligned __put_unaligned_le + +#endif /* _ASM_MN10300_UNALIGNED_H */ diff --git a/arch/mn10300/include/asm/unistd.h b/arch/mn10300/include/asm/unistd.h new file mode 100644 index 00000000000..543a4f98695 --- /dev/null +++ b/arch/mn10300/include/asm/unistd.h @@ -0,0 +1,390 @@ +/* MN10300 System call number list + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_UNISTD_H +#define _ASM_UNISTD_H + +#define __NR_restart_syscall 0 +#define __NR_exit 1 +#define __NR_fork 2 +#define __NR_read 3 +#define __NR_write 4 +#define __NR_open 5 +#define __NR_close 6 +#define __NR_waitpid 7 +#define __NR_creat 8 +#define __NR_link 9 +#define __NR_unlink 10 +#define __NR_execve 11 +#define __NR_chdir 12 +#define __NR_time 13 +#define __NR_mknod 14 +#define __NR_chmod 15 +#define __NR_lchown 16 +#define __NR_break 17 +#define __NR_oldstat 18 +#define __NR_lseek 19 +#define __NR_getpid 20 +#define __NR_mount 21 +#define __NR_umount 22 +#define __NR_setuid 23 +#define __NR_getuid 24 +#define __NR_stime 25 +#define __NR_ptrace 26 +#define __NR_alarm 27 +#define __NR_oldfstat 28 +#define __NR_pause 29 +#define __NR_utime 30 +#define __NR_stty 31 +#define __NR_gtty 32 +#define __NR_access 33 +#define __NR_nice 34 +#define __NR_ftime 35 +#define __NR_sync 36 +#define __NR_kill 37 +#define __NR_rename 38 +#define __NR_mkdir 39 +#define __NR_rmdir 40 +#define __NR_dup 41 +#define __NR_pipe 42 +#define __NR_times 43 +#define __NR_prof 44 +#define __NR_brk 45 +#define __NR_setgid 46 +#define __NR_getgid 47 +#define __NR_signal 48 +#define __NR_geteuid 49 +#define __NR_getegid 50 +#define __NR_acct 51 +#define __NR_umount2 52 +#define __NR_lock 53 +#define __NR_ioctl 54 +#define __NR_fcntl 55 +#define __NR_mpx 56 +#define __NR_setpgid 57 +#define __NR_ulimit 58 +#define __NR_oldolduname 59 +#define __NR_umask 60 +#define __NR_chroot 61 +#define __NR_ustat 62 +#define __NR_dup2 63 +#define __NR_getppid 64 +#define __NR_getpgrp 65 +#define __NR_setsid 66 +#define __NR_sigaction 67 +#define __NR_sgetmask 68 +#define __NR_ssetmask 69 +#define __NR_setreuid 70 +#define __NR_setregid 71 +#define __NR_sigsuspend 72 +#define __NR_sigpending 73 +#define __NR_sethostname 74 +#define __NR_setrlimit 75 +#define __NR_getrlimit 76 /* Back compatible 2Gig limited rlimit */ +#define __NR_getrusage 77 +#define __NR_gettimeofday 78 +#define __NR_settimeofday 79 +#define __NR_getgroups 80 +#define __NR_setgroups 81 +#define __NR_select 82 +#define __NR_symlink 83 +#define __NR_oldlstat 84 +#define __NR_readlink 85 +#define __NR_uselib 86 +#define __NR_swapon 87 +#define __NR_reboot 88 +#define __NR_readdir 89 +#define __NR_mmap 90 +#define __NR_munmap 91 +#define __NR_truncate 92 +#define __NR_ftruncate 93 +#define __NR_fchmod 94 +#define __NR_fchown 95 +#define __NR_getpriority 96 +#define __NR_setpriority 97 +#define __NR_profil 98 +#define __NR_statfs 99 +#define __NR_fstatfs 100 +#define __NR_ioperm 101 +#define __NR_socketcall 102 +#define __NR_syslog 103 +#define __NR_setitimer 104 +#define __NR_getitimer 105 +#define __NR_stat 106 +#define __NR_lstat 107 +#define __NR_fstat 108 +#define __NR_olduname 109 +#define __NR_iopl 110 +#define __NR_vhangup 111 +#define __NR_idle 112 +#define __NR_vm86old 113 +#define __NR_wait4 114 +#define __NR_swapoff 115 +#define __NR_sysinfo 116 +#define __NR_ipc 117 +#define __NR_fsync 118 +#define __NR_sigreturn 119 +#define __NR_clone 120 +#define __NR_setdomainname 121 +#define __NR_uname 122 +#define __NR_modify_ldt 123 +#define __NR_adjtimex 124 +#define __NR_mprotect 125 +#define __NR_sigprocmask 126 +#define __NR_create_module 127 +#define __NR_init_module 128 +#define __NR_delete_module 129 +#define __NR_get_kernel_syms 130 +#define __NR_quotactl 131 +#define __NR_getpgid 132 +#define __NR_fchdir 133 +#define __NR_bdflush 134 +#define __NR_sysfs 135 +#define __NR_personality 136 +#define __NR_afs_syscall 137 /* Syscall for Andrew File System */ +#define __NR_setfsuid 138 +#define __NR_setfsgid 139 +#define __NR__llseek 140 +#define __NR_getdents 141 +#define __NR__newselect 142 +#define __NR_flock 143 +#define __NR_msync 144 +#define __NR_readv 145 +#define __NR_writev 146 +#define __NR_getsid 147 +#define __NR_fdatasync 148 +#define __NR__sysctl 149 +#define __NR_mlock 150 +#define __NR_munlock 151 +#define __NR_mlockall 152 +#define __NR_munlockall 153 +#define __NR_sched_setparam 154 +#define __NR_sched_getparam 155 +#define __NR_sched_setscheduler 156 +#define __NR_sched_getscheduler 157 +#define __NR_sched_yield 158 +#define __NR_sched_get_priority_max 159 +#define __NR_sched_get_priority_min 160 +#define __NR_sched_rr_get_interval 161 +#define __NR_nanosleep 162 +#define __NR_mremap 163 +#define __NR_setresuid 164 +#define __NR_getresuid 165 +#define __NR_vm86 166 +#define __NR_query_module 167 +#define __NR_poll 168 +#define __NR_nfsservctl 169 +#define __NR_setresgid 170 +#define __NR_getresgid 171 +#define __NR_prctl 172 +#define __NR_rt_sigreturn 173 +#define __NR_rt_sigaction 174 +#define __NR_rt_sigprocmask 175 +#define __NR_rt_sigpending 176 +#define __NR_rt_sigtimedwait 177 +#define __NR_rt_sigqueueinfo 178 +#define __NR_rt_sigsuspend 179 +#define __NR_pread64 180 +#define __NR_pwrite64 181 +#define __NR_chown 182 +#define __NR_getcwd 183 +#define __NR_capget 184 +#define __NR_capset 185 +#define __NR_sigaltstack 186 +#define __NR_sendfile 187 +#define __NR_getpmsg 188 /* some people actually want streams */ +#define __NR_putpmsg 189 /* some people actually want streams */ +#define __NR_vfork 190 +#define __NR_ugetrlimit 191 /* SuS compliant getrlimit */ +#define __NR_mmap2 192 +#define __NR_truncate64 193 +#define __NR_ftruncate64 194 +#define __NR_stat64 195 +#define __NR_lstat64 196 +#define __NR_fstat64 197 +#define __NR_lchown32 198 +#define __NR_getuid32 199 +#define __NR_getgid32 200 +#define __NR_geteuid32 201 +#define __NR_getegid32 202 +#define __NR_setreuid32 203 +#define __NR_setregid32 204 +#define __NR_getgroups32 205 +#define __NR_setgroups32 206 +#define __NR_fchown32 207 +#define __NR_setresuid32 208 +#define __NR_getresuid32 209 +#define __NR_setresgid32 210 +#define __NR_getresgid32 211 +#define __NR_chown32 212 +#define __NR_setuid32 213 +#define __NR_setgid32 214 +#define __NR_setfsuid32 215 +#define __NR_setfsgid32 216 +#define __NR_pivot_root 217 +#define __NR_mincore 218 +#define __NR_madvise 219 +#define __NR_madvise1 219 /* delete when C lib stub is removed */ +#define __NR_getdents64 220 +#define __NR_fcntl64 221 +/* 223 is unused */ +#define __NR_gettid 224 +#define __NR_readahead 225 +#define __NR_setxattr 226 +#define __NR_lsetxattr 227 +#define __NR_fsetxattr 228 +#define __NR_getxattr 229 +#define __NR_lgetxattr 230 +#define __NR_fgetxattr 231 +#define __NR_listxattr 232 +#define __NR_llistxattr 233 +#define __NR_flistxattr 234 +#define __NR_removexattr 235 +#define __NR_lremovexattr 236 +#define __NR_fremovexattr 237 +#define __NR_tkill 238 +#define __NR_sendfile64 239 +#define __NR_futex 240 +#define __NR_sched_setaffinity 241 +#define __NR_sched_getaffinity 242 +#define __NR_set_thread_area 243 +#define __NR_get_thread_area 244 +#define __NR_io_setup 245 +#define __NR_io_destroy 246 +#define __NR_io_getevents 247 +#define __NR_io_submit 248 +#define __NR_io_cancel 249 +#define __NR_fadvise64 250 + +#define __NR_exit_group 252 +#define __NR_lookup_dcookie 253 +#define __NR_epoll_create 254 +#define __NR_epoll_ctl 255 +#define __NR_epoll_wait 256 +#define __NR_remap_file_pages 257 +#define __NR_set_tid_address 258 +#define __NR_timer_create 259 +#define __NR_timer_settime (__NR_timer_create+1) +#define __NR_timer_gettime (__NR_timer_create+2) +#define __NR_timer_getoverrun (__NR_timer_create+3) +#define __NR_timer_delete (__NR_timer_create+4) +#define __NR_clock_settime (__NR_timer_create+5) +#define __NR_clock_gettime (__NR_timer_create+6) +#define __NR_clock_getres (__NR_timer_create+7) +#define __NR_clock_nanosleep (__NR_timer_create+8) +#define __NR_statfs64 268 +#define __NR_fstatfs64 269 +#define __NR_tgkill 270 +#define __NR_utimes 271 +#define __NR_fadvise64_64 272 +#define __NR_vserver 273 +#define __NR_mbind 274 +#define __NR_get_mempolicy 275 +#define __NR_set_mempolicy 276 +#define __NR_mq_open 277 +#define __NR_mq_unlink (__NR_mq_open+1) +#define __NR_mq_timedsend (__NR_mq_open+2) +#define __NR_mq_timedreceive (__NR_mq_open+3) +#define __NR_mq_notify (__NR_mq_open+4) +#define __NR_mq_getsetattr (__NR_mq_open+5) +#define __NR_kexec_load 283 +#define __NR_waitid 284 +#define __NR_add_key 286 +#define __NR_request_key 287 +#define __NR_keyctl 288 +#define __NR_cacheflush 289 +#define __NR_ioprio_set 290 +#define __NR_ioprio_get 291 +#define __NR_inotify_init 292 +#define __NR_inotify_add_watch 293 +#define __NR_inotify_rm_watch 294 +#define __NR_migrate_pages 295 +#define __NR_openat 296 +#define __NR_mkdirat 297 +#define __NR_mknodat 298 +#define __NR_fchownat 299 +#define __NR_futimesat 300 +#define __NR_fstatat64 301 +#define __NR_unlinkat 302 +#define __NR_renameat 303 +#define __NR_linkat 304 +#define __NR_symlinkat 305 +#define __NR_readlinkat 306 +#define __NR_fchmodat 307 +#define __NR_faccessat 308 +#define __NR_pselect6 309 +#define __NR_ppoll 310 +#define __NR_unshare 311 +#define __NR_set_robust_list 312 +#define __NR_get_robust_list 313 +#define __NR_splice 314 +#define __NR_sync_file_range 315 +#define __NR_tee 316 +#define __NR_vmsplice 317 +#define __NR_move_pages 318 +#define __NR_getcpu 319 +#define __NR_epoll_pwait 320 +#define __NR_utimensat 321 +#define __NR_signalfd 322 +#define __NR_timerfd_create 323 +#define __NR_eventfd 324 +#define __NR_fallocate 325 +#define __NR_timerfd_settime 326 +#define __NR_timerfd_gettime 327 +#define __NR_signalfd4 328 +#define __NR_eventfd2 329 +#define __NR_epoll_create1 330 +#define __NR_dup3 331 +#define __NR_pipe2 332 +#define __NR_inotify_init1 333 + +#ifdef __KERNEL__ + +#define NR_syscalls 326 + +/* + * specify the deprecated syscalls we want to support on this arch + */ +#define __ARCH_WANT_IPC_PARSE_VERSION +#define __ARCH_WANT_OLD_READDIR +#define __ARCH_WANT_OLD_STAT +#define __ARCH_WANT_STAT64 +#define __ARCH_WANT_SYS_ALARM +#define __ARCH_WANT_SYS_GETHOSTNAME +#define __ARCH_WANT_SYS_PAUSE +#define __ARCH_WANT_SYS_SGETMASK +#define __ARCH_WANT_SYS_SIGNAL +#define __ARCH_WANT_SYS_TIME +#define __ARCH_WANT_SYS_UTIME +#define __ARCH_WANT_SYS_WAITPID +#define __ARCH_WANT_SYS_SOCKETCALL +#define __ARCH_WANT_SYS_FADVISE64 +#define __ARCH_WANT_SYS_GETPGRP +#define __ARCH_WANT_SYS_LLSEEK +#define __ARCH_WANT_SYS_NICE +#define __ARCH_WANT_SYS_OLD_GETRLIMIT +#define __ARCH_WANT_SYS_OLDUMOUNT +#define __ARCH_WANT_SYS_SIGPENDING +#define __ARCH_WANT_SYS_SIGPROCMASK +#define __ARCH_WANT_SYS_RT_SIGACTION +#define __ARCH_WANT_SYS_RT_SIGSUSPEND + +/* + * "Conditional" syscalls + * + * What we want is __attribute__((weak,alias("sys_ni_syscall"))), + * but it doesn't work on all toolchains, so we just do it by hand + */ +#ifndef cond_syscall +#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall"); +#endif + +#endif /* __KERNEL__ */ +#endif /* _ASM_UNISTD_H */ diff --git a/arch/mn10300/include/asm/user.h b/arch/mn10300/include/asm/user.h new file mode 100644 index 00000000000..e1193908b78 --- /dev/null +++ b/arch/mn10300/include/asm/user.h @@ -0,0 +1,53 @@ +/* MN10300 User process data + * + * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_USER_H +#define _ASM_USER_H + +#include <asm/page.h> +#include <linux/ptrace.h> + +#ifndef __ASSEMBLY__ +/* + * When the kernel dumps core, it starts by dumping the user struct - this will + * be used by gdb to figure out where the data and stack segments are within + * the file, and what virtual addresses to use. + */ +struct user { + /* We start with the registers, to mimic the way that "memory" is + * returned from the ptrace(3,...) function. + */ + struct pt_regs regs; /* Where the registers are actually stored */ + + /* The rest of this junk is to help gdb figure out what goes where */ + unsigned long int u_tsize; /* Text segment size (pages). */ + unsigned long int u_dsize; /* Data segment size (pages). */ + unsigned long int u_ssize; /* Stack segment size (pages). */ + unsigned long start_code; /* Starting virtual address of text. */ + unsigned long start_stack; /* Starting virtual address of stack area. + This is actually the bottom of the stack, + the top of the stack is always found in the + esp register. */ + long int signal; /* Signal that caused the core dump. */ + int reserved; /* No longer used */ + struct user_pt_regs *u_ar0; /* Used by gdb to help find the values for */ + + /* the registers */ + unsigned long magic; /* To uniquely identify a core file */ + char u_comm[32]; /* User command that was responsible */ +}; +#endif + +#define NBPG PAGE_SIZE +#define UPAGES 1 +#define HOST_TEXT_START_ADDR +(u.start_code) +#define HOST_STACK_END_ADDR +(u.start_stack + u.u_ssize * NBPG) + +#endif /* _ASM_USER_H */ diff --git a/arch/mn10300/include/asm/vga.h b/arch/mn10300/include/asm/vga.h new file mode 100644 index 00000000000..0163e50a345 --- /dev/null +++ b/arch/mn10300/include/asm/vga.h @@ -0,0 +1,17 @@ +/* MN10300 VGA register definitions + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _ASM_VGA_H +#define _ASM_VGA_H + + + +#endif /* _ASM_VGA_H */ diff --git a/arch/mn10300/include/asm/xor.h b/arch/mn10300/include/asm/xor.h new file mode 100644 index 00000000000..c82eb12a5b1 --- /dev/null +++ b/arch/mn10300/include/asm/xor.h @@ -0,0 +1 @@ +#include <asm-generic/xor.h> diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S index ceeaaaa359e..34ab5a29315 100644 --- a/arch/mn10300/kernel/entry.S +++ b/arch/mn10300/kernel/entry.S @@ -20,7 +20,7 @@ #include <asm/intctl-regs.h> #include <asm/busctl-regs.h> #include <asm/timer-regs.h> -#include <asm/unit/leds.h> +#include <unit/leds.h> #include <asm/page.h> #include <asm/pgtable.h> #include <asm/errno.h> diff --git a/arch/mn10300/kernel/gdb-io-serial-low.S b/arch/mn10300/kernel/gdb-io-serial-low.S index c68dcd05220..4998b24f5d3 100644 --- a/arch/mn10300/kernel/gdb-io-serial-low.S +++ b/arch/mn10300/kernel/gdb-io-serial-low.S @@ -18,7 +18,7 @@ #include <asm/thread_info.h> #include <asm/frame.inc> #include <asm/intctl-regs.h> -#include <asm/unit/serial.h> +#include <unit/serial.h> .text diff --git a/arch/mn10300/kernel/gdb-io-serial.c b/arch/mn10300/kernel/gdb-io-serial.c index 11584c51acd..ae663dc717e 100644 --- a/arch/mn10300/kernel/gdb-io-serial.c +++ b/arch/mn10300/kernel/gdb-io-serial.c @@ -22,7 +22,7 @@ #include <asm/gdb-stub.h> #include <asm/exceptions.h> #include <asm/serial-regs.h> -#include <asm/unit/serial.h> +#include <unit/serial.h> /* * initialise the GDB stub diff --git a/arch/mn10300/kernel/gdb-io-ttysm-low.S b/arch/mn10300/kernel/gdb-io-ttysm-low.S index 677c7876307..060b7cca735 100644 --- a/arch/mn10300/kernel/gdb-io-ttysm-low.S +++ b/arch/mn10300/kernel/gdb-io-ttysm-low.S @@ -18,7 +18,7 @@ #include <asm/cpu-regs.h> #include <asm/frame.inc> #include <asm/intctl-regs.h> -#include <asm/unit/serial.h> +#include <unit/serial.h> #include "mn10300-serial.h" .text diff --git a/arch/mn10300/kernel/gdb-io-ttysm.c b/arch/mn10300/kernel/gdb-io-ttysm.c index e94c25e8ca0..a560bbc3137 100644 --- a/arch/mn10300/kernel/gdb-io-ttysm.c +++ b/arch/mn10300/kernel/gdb-io-ttysm.c @@ -20,7 +20,7 @@ #include <asm/system.h> #include <asm/gdb-stub.h> #include <asm/exceptions.h> -#include <asm/unit/clock.h> +#include <unit/clock.h> #include "mn10300-serial.h" #if defined(CONFIG_GDBSTUB_ON_TTYSM0) diff --git a/arch/mn10300/kernel/gdb-stub.c b/arch/mn10300/kernel/gdb-stub.c index 0ea7482c152..41b11706c8e 100644 --- a/arch/mn10300/kernel/gdb-stub.c +++ b/arch/mn10300/kernel/gdb-stub.c @@ -136,8 +136,8 @@ #include <asm/cacheflush.h> #include <asm/serial-regs.h> #include <asm/busctl-regs.h> -#include <asm/unit/leds.h> -#include <asm/unit/serial.h> +#include <unit/leds.h> +#include <unit/serial.h> /* define to use F7F7 rather than FF which is subverted by JTAG debugger */ #undef GDBSTUB_USE_F7F7_AS_BREAKPOINT diff --git a/arch/mn10300/kernel/head.S b/arch/mn10300/kernel/head.S index 606bd8c6758..8a8309fbe3c 100644 --- a/arch/mn10300/kernel/head.S +++ b/arch/mn10300/kernel/head.S @@ -17,7 +17,7 @@ #include <asm/pgtable.h> #include <asm/frame.inc> #include <asm/param.h> -#include <asm/unit/serial.h> +#include <unit/serial.h> .section .text.head,"ax" diff --git a/arch/mn10300/kernel/irq.c b/arch/mn10300/kernel/irq.c index 50fdb5c16e0..4c3c58ef5cd 100644 --- a/arch/mn10300/kernel/irq.c +++ b/arch/mn10300/kernel/irq.c @@ -140,7 +140,7 @@ void __init init_IRQ(void) int irq; for (irq = 0; irq < NR_IRQS; irq++) - if (irq_desc[irq].chip == &no_irq_type) + if (irq_desc[irq].chip == &no_irq_chip) /* due to the PIC latching interrupt requests, even * when the IRQ is disabled, IRQ_PENDING is superfluous * and we can use handle_level_irq() for edge-triggered diff --git a/arch/mn10300/kernel/mn10300-serial-low.S b/arch/mn10300/kernel/mn10300-serial-low.S index ef3f4c1df2a..22448538822 100644 --- a/arch/mn10300/kernel/mn10300-serial-low.S +++ b/arch/mn10300/kernel/mn10300-serial-low.S @@ -18,8 +18,8 @@ #include <asm/cpu-regs.h> #include <asm/frame.inc> #include <asm/timer-regs.h> -#include <asm/proc/cache.h> -#include <asm/unit/timex.h> +#include <proc/cache.h> +#include <unit/timex.h> #include "mn10300-serial.h" #define SCxCTR 0x00 diff --git a/arch/mn10300/kernel/mn10300-serial.c b/arch/mn10300/kernel/mn10300-serial.c index 59b9c4bf958..2fd59664d00 100644 --- a/arch/mn10300/kernel/mn10300-serial.c +++ b/arch/mn10300/kernel/mn10300-serial.c @@ -41,7 +41,7 @@ static const char serial_revdate[] = "2007-11-06"; #include <asm/irq.h> #include <asm/bitops.h> #include <asm/serial-regs.h> -#include <asm/unit/timex.h> +#include <unit/timex.h> #include "mn10300-serial.h" static inline __attribute__((format(printf, 1, 2))) diff --git a/arch/mn10300/kernel/mn10300-watchdog.c b/arch/mn10300/kernel/mn10300-watchdog.c index 2e370d88a87..f362d9d138f 100644 --- a/arch/mn10300/kernel/mn10300-watchdog.c +++ b/arch/mn10300/kernel/mn10300-watchdog.c @@ -25,7 +25,7 @@ #include <asm/div64.h> #include <asm/smp.h> #include <asm/gdb-stub.h> -#include <asm/proc/clock.h> +#include <proc/clock.h> static DEFINE_SPINLOCK(watchdog_print_lock); static unsigned int watchdog; diff --git a/arch/mn10300/kernel/setup.c b/arch/mn10300/kernel/setup.c index e1d88ab5100..71414e19fd1 100644 --- a/arch/mn10300/kernel/setup.c +++ b/arch/mn10300/kernel/setup.c @@ -30,7 +30,7 @@ #include <asm/setup.h> #include <asm/io.h> #include <asm/smp.h> -#include <asm/proc/proc.h> +#include <proc/proc.h> #include <asm/busctl-regs.h> #include <asm/fpu.h> #include <asm/sections.h> diff --git a/arch/mn10300/kernel/traps.c b/arch/mn10300/kernel/traps.c index fcb9a03d46a..681ad8c9e4f 100644 --- a/arch/mn10300/kernel/traps.c +++ b/arch/mn10300/kernel/traps.c @@ -37,7 +37,7 @@ #include <asm/cacheflush.h> #include <asm/cpu-regs.h> #include <asm/busctl-regs.h> -#include <asm/unit/leds.h> +#include <unit/leds.h> #include <asm/fpu.h> #include <asm/gdb-stub.h> #include <asm/sections.h> diff --git a/arch/mn10300/oprofile/Kconfig b/arch/mn10300/oprofile/Kconfig deleted file mode 100644 index 19d37730b66..00000000000 --- a/arch/mn10300/oprofile/Kconfig +++ /dev/null @@ -1,23 +0,0 @@ - -menu "Profiling support" - depends on EXPERIMENTAL - -config PROFILING - bool "Profiling support (EXPERIMENTAL)" - help - Say Y here to enable the extended profiling support mechanisms used - by profilers such as OProfile. - - -config OPROFILE - tristate "OProfile system profiling (EXPERIMENTAL)" - depends on PROFILING - help - OProfile is a profiling system capable of profiling the - whole system, include the kernel, kernel modules, libraries, - and applications. - - If unsure, say N. - -endmenu - diff --git a/arch/mn10300/proc-mn103e010/include/proc/cache.h b/arch/mn10300/proc-mn103e010/include/proc/cache.h new file mode 100644 index 00000000000..bdc1f9a59b4 --- /dev/null +++ b/arch/mn10300/proc-mn103e010/include/proc/cache.h @@ -0,0 +1,33 @@ +/* MN103E010 Cache specification + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_PROC_CACHE_H +#define _ASM_PROC_CACHE_H + +/* L1 cache */ + +#define L1_CACHE_NWAYS 4 /* number of ways in caches */ +#define L1_CACHE_NENTRIES 256 /* number of entries in each way */ +#define L1_CACHE_BYTES 16 /* bytes per entry */ +#define L1_CACHE_SHIFT 4 /* shift for bytes per entry */ +#define L1_CACHE_WAYDISP 0x1000 /* displacement of one way from the next */ + +#define L1_CACHE_TAG_VALID 0x00000001 /* cache tag valid bit */ +#define L1_CACHE_TAG_DIRTY 0x00000008 /* data cache tag dirty bit */ +#define L1_CACHE_TAG_ENTRY 0x00000ff0 /* cache tag entry address mask */ +#define L1_CACHE_TAG_ADDRESS 0xfffff000 /* cache tag line address mask */ + +/* + * specification of the interval between interrupt checking intervals whilst + * managing the cache with the interrupts disabled + */ +#define MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL 4 + +#endif /* _ASM_PROC_CACHE_H */ diff --git a/arch/mn10300/proc-mn103e010/include/proc/clock.h b/arch/mn10300/proc-mn103e010/include/proc/clock.h new file mode 100644 index 00000000000..aa23e147d62 --- /dev/null +++ b/arch/mn10300/proc-mn103e010/include/proc/clock.h @@ -0,0 +1,18 @@ +/* MN103E010-specific clocks + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_PROC_CLOCK_H +#define _ASM_PROC_CLOCK_H + +#include <unit/clock.h> + +#define MN10300_WDCLK MN10300_IOCLK + +#endif /* _ASM_PROC_CLOCK_H */ diff --git a/arch/mn10300/proc-mn103e010/include/proc/irq.h b/arch/mn10300/proc-mn103e010/include/proc/irq.h new file mode 100644 index 00000000000..aa6ee8f98b1 --- /dev/null +++ b/arch/mn10300/proc-mn103e010/include/proc/irq.h @@ -0,0 +1,34 @@ +/* MN103E010 On-board interrupt controller numbers + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _ASM_PROC_IRQ_H +#define _ASM_PROC_IRQ_H + +#ifdef __KERNEL__ + +#define GxICR_NUM_IRQS 42 + +#define GxICR_NUM_XIRQS 8 + +#define XIRQ0 34 +#define XIRQ1 35 +#define XIRQ2 36 +#define XIRQ3 37 +#define XIRQ4 38 +#define XIRQ5 39 +#define XIRQ6 40 +#define XIRQ7 41 + +#define XIRQ2IRQ(num) (XIRQ0 + num) + +#endif /* __KERNEL__ */ + +#endif /* _ASM_PROC_IRQ_H */ diff --git a/arch/mn10300/proc-mn103e010/include/proc/proc.h b/arch/mn10300/proc-mn103e010/include/proc/proc.h new file mode 100644 index 00000000000..22a2b93f70b --- /dev/null +++ b/arch/mn10300/proc-mn103e010/include/proc/proc.h @@ -0,0 +1,18 @@ +/* MN103E010 Processor description + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _ASM_PROC_PROC_H +#define _ASM_PROC_PROC_H + +#define PROCESSOR_VENDOR_NAME "Matsushita" +#define PROCESSOR_MODEL_NAME "mn103e010" + +#endif /* _ASM_PROC_PROC_H */ diff --git a/arch/mn10300/unit-asb2303/include/unit/clock.h b/arch/mn10300/unit-asb2303/include/unit/clock.h new file mode 100644 index 00000000000..8b450e920af --- /dev/null +++ b/arch/mn10300/unit-asb2303/include/unit/clock.h @@ -0,0 +1,45 @@ +/* ASB2303-specific clocks + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _ASM_UNIT_CLOCK_H +#define _ASM_UNIT_CLOCK_H + +#ifndef __ASSEMBLY__ + +#ifdef CONFIG_MN10300_RTC + +extern unsigned long mn10300_ioclk; /* IOCLK (crystal speed) in HZ */ +extern unsigned long mn10300_iobclk; +extern unsigned long mn10300_tsc_per_HZ; + +#define MN10300_IOCLK ((unsigned long)mn10300_ioclk) +/* If this processors has a another clock, uncomment the below. */ +/* #define MN10300_IOBCLK ((unsigned long)mn10300_iobclk) */ + +#else /* !CONFIG_MN10300_RTC */ + +#define MN10300_IOCLK 33333333UL +/* #define MN10300_IOBCLK 66666666UL */ + +#endif /* !CONFIG_MN10300_RTC */ + +#define MN10300_JCCLK MN10300_IOCLK +#define MN10300_TSCCLK MN10300_IOCLK + +#ifdef CONFIG_MN10300_RTC +#define MN10300_TSC_PER_HZ ((unsigned long)mn10300_tsc_per_HZ) +#else /* !CONFIG_MN10300_RTC */ +#define MN10300_TSC_PER_HZ (MN10300_TSCCLK/HZ) +#endif /* !CONFIG_MN10300_RTC */ + +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_UNIT_CLOCK_H */ diff --git a/arch/mn10300/unit-asb2303/include/unit/leds.h b/arch/mn10300/unit-asb2303/include/unit/leds.h new file mode 100644 index 00000000000..3a7543ea7b5 --- /dev/null +++ b/arch/mn10300/unit-asb2303/include/unit/leds.h @@ -0,0 +1,43 @@ +/* ASB2303-specific LEDs + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _ASM_UNIT_LEDS_H +#define _ASM_UNIT_LEDS_H + +#include <asm/pio-regs.h> +#include <asm/cpu-regs.h> +#include <asm/exceptions.h> + +#define ASB2303_GPIO0DEF __SYSREG(0xDB000000, u32) +#define ASB2303_7SEGLEDS __SYSREG(0xDB000008, u32) + +/* + * use the 7-segment LEDs to indicate states + */ + +/* flip the 7-segment LEDs between "G" and "-" */ +#define mn10300_set_gdbleds(ONOFF) \ +do { \ + ASB2303_7SEGLEDS = (ONOFF) ? 0x85 : 0x7f; \ +} while (0) + +/* indicate double-fault by displaying "d" on the LEDs */ +#define mn10300_set_dbfleds \ + mov 0x43,d0 ; \ + movbu d0,(ASB2303_7SEGLEDS) + +#ifndef __ASSEMBLY__ +extern void peripheral_leds_display_exception(enum exception_code code); +extern void peripheral_leds_led_chase(void); +extern void debug_to_serial(const char *p, int n); +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_UNIT_LEDS_H */ diff --git a/arch/mn10300/unit-asb2303/include/unit/serial.h b/arch/mn10300/unit-asb2303/include/unit/serial.h new file mode 100644 index 00000000000..047566cd2e3 --- /dev/null +++ b/arch/mn10300/unit-asb2303/include/unit/serial.h @@ -0,0 +1,136 @@ +/* ASB2303-specific 8250 serial ports + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _ASM_UNIT_SERIAL_H +#define _ASM_UNIT_SERIAL_H + +#include <asm/cpu-regs.h> +#include <proc/irq.h> +#include <linux/serial_reg.h> + +#define SERIAL_PORT0_BASE_ADDRESS 0xA6FB0000 +#define SERIAL_PORT1_BASE_ADDRESS 0xA6FC0000 + +#define SERIAL_IRQ XIRQ0 /* Dual serial (PC16552) (Hi) */ + +/* + * dispose of the /dev/ttyS0 and /dev/ttyS1 serial ports + */ +#ifndef CONFIG_GDBSTUB_ON_TTYSx + +#define SERIAL_PORT_DFNS \ + { \ + .baud_base = BASE_BAUD, \ + .irq = SERIAL_IRQ, \ + .flags = STD_COM_FLAGS, \ + .iomem_base = (u8 *) SERIAL_PORT0_BASE_ADDRESS, \ + .iomem_reg_shift = 2, \ + .io_type = SERIAL_IO_MEM, \ + }, \ + { \ + .baud_base = BASE_BAUD, \ + .irq = SERIAL_IRQ, \ + .flags = STD_COM_FLAGS, \ + .iomem_base = (u8 *) SERIAL_PORT1_BASE_ADDRESS, \ + .iomem_reg_shift = 2, \ + .io_type = SERIAL_IO_MEM, \ + }, + +#ifndef __ASSEMBLY__ + +static inline void __debug_to_serial(const char *p, int n) +{ +} + +#endif /* !__ASSEMBLY__ */ + +#else /* CONFIG_GDBSTUB_ON_TTYSx */ + +#define SERIAL_PORT_DFNS /* both stolen by gdb-stub because they share an IRQ */ + +#if defined(CONFIG_GDBSTUB_ON_TTYS0) +#define GDBPORT_SERIAL_RX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_RX * 4, u8) +#define GDBPORT_SERIAL_TX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX * 4, u8) +#define GDBPORT_SERIAL_DLL __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLL * 4, u8) +#define GDBPORT_SERIAL_DLM __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLM * 4, u8) +#define GDBPORT_SERIAL_IER __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IER * 4, u8) +#define GDBPORT_SERIAL_IIR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IIR * 4, u8) +#define GDBPORT_SERIAL_FCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_FCR * 4, u8) +#define GDBPORT_SERIAL_LCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LCR * 4, u8) +#define GDBPORT_SERIAL_MCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8) +#define GDBPORT_SERIAL_LSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8) +#define GDBPORT_SERIAL_MSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8) +#define GDBPORT_SERIAL_SCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_SCR * 4, u8) +#define GDBPORT_SERIAL_IRQ SERIAL_IRQ + +#elif defined(CONFIG_GDBSTUB_ON_TTYS1) +#define GDBPORT_SERIAL_RX __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_RX * 4, u8) +#define GDBPORT_SERIAL_TX __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_TX * 4, u8) +#define GDBPORT_SERIAL_DLL __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_DLL * 4, u8) +#define GDBPORT_SERIAL_DLM __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_DLM * 4, u8) +#define GDBPORT_SERIAL_IER __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_IER * 4, u8) +#define GDBPORT_SERIAL_IIR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_IIR * 4, u8) +#define GDBPORT_SERIAL_FCR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_FCR * 4, u8) +#define GDBPORT_SERIAL_LCR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_LCR * 4, u8) +#define GDBPORT_SERIAL_MCR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_MCR * 4, u8) +#define GDBPORT_SERIAL_LSR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_LSR * 4, u8) +#define GDBPORT_SERIAL_MSR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_MSR * 4, u8) +#define GDBPORT_SERIAL_SCR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_SCR * 4, u8) +#define GDBPORT_SERIAL_IRQ SERIAL_IRQ +#endif + +#ifndef __ASSEMBLY__ + +#define LSR_WAIT_FOR(STATE) \ +do { \ + while (!(GDBPORT_SERIAL_LSR & UART_LSR_##STATE)) {} \ +} while (0) +#define FLOWCTL_WAIT_FOR(LINE) \ +do { \ + while (!(GDBPORT_SERIAL_MSR & UART_MSR_##LINE)) {} \ +} while (0) +#define FLOWCTL_CLEAR(LINE) \ +do { \ + GDBPORT_SERIAL_MCR &= ~UART_MCR_##LINE; \ +} while (0) +#define FLOWCTL_SET(LINE) \ +do { \ + GDBPORT_SERIAL_MCR |= UART_MCR_##LINE; \ +} while (0) +#define FLOWCTL_QUERY(LINE) ({ GDBPORT_SERIAL_MSR & UART_MSR_##LINE; }) + +static inline void __debug_to_serial(const char *p, int n) +{ + char ch; + + FLOWCTL_SET(DTR); + + for (; n > 0; n--) { + LSR_WAIT_FOR(THRE); + FLOWCTL_WAIT_FOR(CTS); + + ch = *p++; + if (ch == 0x0a) { + GDBPORT_SERIAL_TX = 0x0d; + LSR_WAIT_FOR(THRE); + FLOWCTL_WAIT_FOR(CTS); + } + GDBPORT_SERIAL_TX = ch; + } + + FLOWCTL_CLEAR(DTR); +} + +#endif /* !__ASSEMBLY__ */ + +#endif /* CONFIG_GDBSTUB_ON_TTYSx */ + +#endif /* _ASM_UNIT_SERIAL_H */ diff --git a/arch/mn10300/unit-asb2303/include/unit/smc91111.h b/arch/mn10300/unit-asb2303/include/unit/smc91111.h new file mode 100644 index 00000000000..dd456e9c513 --- /dev/null +++ b/arch/mn10300/unit-asb2303/include/unit/smc91111.h @@ -0,0 +1,50 @@ +/* Support for the SMC91C111 NIC on an ASB2303 + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_UNIT_SMC91111_H +#define _ASM_UNIT_SMC91111_H + +#include <asm/intctl-regs.h> + +#define SMC91111_BASE 0xAA000300UL +#define SMC91111_BASE_END 0xAA000400UL +#define SMC91111_IRQ XIRQ3 + +#define SMC_CAN_USE_8BIT 0 +#define SMC_CAN_USE_16BIT 1 +#define SMC_CAN_USE_32BIT 0 +#define SMC_NOWAIT 1 +#define SMC_IRQ_FLAGS (0) + +#if SMC_CAN_USE_8BIT +#define SMC_inb(a, r) inb((unsigned long) ((a) + (r))) +#define SMC_outb(v, a, r) outb(v, (unsigned long) ((a) + (r))) +#endif + +#if SMC_CAN_USE_16BIT +#define SMC_inw(a, r) inw((unsigned long) ((a) + (r))) +#define SMC_outw(v, a, r) outw(v, (unsigned long) ((a) + (r))) +#define SMC_insw(a, r, p, l) insw((unsigned long) ((a) + (r)), (p), (l)) +#define SMC_outsw(a, r, p, l) outsw((unsigned long) ((a) + (r)), (p), (l)) +#endif + +#if SMC_CAN_USE_32BIT +#define SMC_inl(a, r) inl((unsigned long) ((a) + (r))) +#define SMC_outl(v, a, r) outl(v, (unsigned long) ((a) + (r))) +#define SMC_insl(a, r, p, l) insl((unsigned long) ((a) + (r)), (p), (l)) +#define SMC_outsl(a, r, p, l) outsl((unsigned long) ((a) + (r)), (p), (l)) +#endif + +#define RPC_LSA_DEFAULT RPC_LED_100_10 +#define RPC_LSB_DEFAULT RPC_LED_TX_RX + +#define set_irq_type(irq, type) + +#endif /* _ASM_UNIT_SMC91111_H */ diff --git a/arch/mn10300/unit-asb2303/include/unit/timex.h b/arch/mn10300/unit-asb2303/include/unit/timex.h new file mode 100644 index 00000000000..f206b63c95b --- /dev/null +++ b/arch/mn10300/unit-asb2303/include/unit/timex.h @@ -0,0 +1,135 @@ +/* ASB2303-specific timer specifcations + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_UNIT_TIMEX_H +#define _ASM_UNIT_TIMEX_H + +#ifndef __ASSEMBLY__ +#include <linux/irq.h> +#endif /* __ASSEMBLY__ */ + +#include <asm/timer-regs.h> +#include <unit/clock.h> + +/* + * jiffies counter specifications + */ + +#define TMJCBR_MAX 0xffff +#define TMJCBC TM01BC + +#define TMJCMD TM01MD +#define TMJCBR TM01BR +#define TMJCIRQ TM1IRQ +#define TMJCICR TM1ICR +#define TMJCICR_LEVEL GxICR_LEVEL_5 + +#ifndef __ASSEMBLY__ + +static inline void startup_jiffies_counter(void) +{ + unsigned rate; + u16 md, t16; + + /* use as little prescaling as possible to avoid losing accuracy */ + md = TM0MD_SRC_IOCLK; + rate = MN10300_JCCLK / HZ; + + if (rate > TMJCBR_MAX) { + md = TM0MD_SRC_IOCLK_8; + rate = MN10300_JCCLK / 8 / HZ; + + if (rate > TMJCBR_MAX) { + md = TM0MD_SRC_IOCLK_32; + rate = MN10300_JCCLK / 32 / HZ; + + if (rate > TMJCBR_MAX) + BUG(); + } + } + + TMJCBR = rate - 1; + t16 = TMJCBR; + + TMJCMD = + md | + TM1MD_SRC_TM0CASCADE << 8 | + TM0MD_INIT_COUNTER | + TM1MD_INIT_COUNTER << 8; + + TMJCMD = + md | + TM1MD_SRC_TM0CASCADE << 8 | + TM0MD_COUNT_ENABLE | + TM1MD_COUNT_ENABLE << 8; + + t16 = TMJCMD; + + TMJCICR |= GxICR_ENABLE | GxICR_DETECT | GxICR_REQUEST; + t16 = TMJCICR; +} + +static inline void shutdown_jiffies_counter(void) +{ +} + +#endif /* !__ASSEMBLY__ */ + + +/* + * timestamp counter specifications + */ + +#define TMTSCBR_MAX 0xffffffff +#define TMTSCBC TM45BC + +#ifndef __ASSEMBLY__ + +static inline void startup_timestamp_counter(void) +{ + /* set up timer 4 & 5 cascaded as a 32-bit counter to count real time + * - count down from 4Gig-1 to 0 and wrap at IOCLK rate + */ + TM45BR = TMTSCBR_MAX; + + TM4MD = TM4MD_SRC_IOCLK; + TM4MD |= TM4MD_INIT_COUNTER; + TM4MD &= ~TM4MD_INIT_COUNTER; + TM4ICR = 0; + + TM5MD = TM5MD_SRC_TM4CASCADE; + TM5MD |= TM5MD_INIT_COUNTER; + TM5MD &= ~TM5MD_INIT_COUNTER; + TM5ICR = 0; + + TM5MD |= TM5MD_COUNT_ENABLE; + TM4MD |= TM4MD_COUNT_ENABLE; +} + +static inline void shutdown_timestamp_counter(void) +{ + TM4MD = 0; + TM5MD = 0; +} + +/* + * we use a cascaded pair of 16-bit down-counting timers to count I/O + * clock cycles for the purposes of time keeping + */ +typedef unsigned long cycles_t; + +static inline cycles_t read_timestamp_counter(void) +{ + return (cycles_t)TMTSCBC; +} + +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_UNIT_TIMEX_H */ diff --git a/arch/mn10300/unit-asb2303/leds.c b/arch/mn10300/unit-asb2303/leds.c index cd4bc78ccfc..c03839357a1 100644 --- a/arch/mn10300/unit-asb2303/leds.c +++ b/arch/mn10300/unit-asb2303/leds.c @@ -16,7 +16,7 @@ #include <asm/processor.h> #include <asm/intctl-regs.h> #include <asm/rtc-regs.h> -#include <asm/unit/leds.h> +#include <unit/leds.h> #if 0 static const u8 asb2303_led_hex_tbl[16] = { diff --git a/arch/mn10300/unit-asb2303/smc91111.c b/arch/mn10300/unit-asb2303/smc91111.c index 30875dd6563..43c24643941 100644 --- a/arch/mn10300/unit-asb2303/smc91111.c +++ b/arch/mn10300/unit-asb2303/smc91111.c @@ -18,7 +18,7 @@ #include <asm/timex.h> #include <asm/processor.h> #include <asm/intctl-regs.h> -#include <asm/unit/smc91111.h> +#include <unit/smc91111.h> static struct resource smc91c111_resources[] = { [0] = { diff --git a/arch/mn10300/unit-asb2305/include/unit/clock.h b/arch/mn10300/unit-asb2305/include/unit/clock.h new file mode 100644 index 00000000000..7d514841ffd --- /dev/null +++ b/arch/mn10300/unit-asb2305/include/unit/clock.h @@ -0,0 +1,45 @@ +/* ASB2305-specific clocks + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _ASM_UNIT_CLOCK_H +#define _ASM_UNIT_CLOCK_H + +#ifndef __ASSEMBLY__ + +#ifdef CONFIG_MN10300_RTC + +extern unsigned long mn10300_ioclk; /* IOCLK (crystal speed) in HZ */ +extern unsigned long mn10300_iobclk; +extern unsigned long mn10300_tsc_per_HZ; + +#define MN10300_IOCLK ((unsigned long)mn10300_ioclk) +/* If this processors has a another clock, uncomment the below. */ +/* #define MN10300_IOBCLK ((unsigned long)mn10300_iobclk) */ + +#else /* !CONFIG_MN10300_RTC */ + +#define MN10300_IOCLK 33333333UL +/* #define MN10300_IOBCLK 66666666UL */ + +#endif /* !CONFIG_MN10300_RTC */ + +#define MN10300_JCCLK MN10300_IOCLK +#define MN10300_TSCCLK MN10300_IOCLK + +#ifdef CONFIG_MN10300_RTC +#define MN10300_TSC_PER_HZ ((unsigned long)mn10300_tsc_per_HZ) +#else /* !CONFIG_MN10300_RTC */ +#define MN10300_TSC_PER_HZ (MN10300_TSCCLK/HZ) +#endif /* !CONFIG_MN10300_RTC */ + +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_UNIT_CLOCK_H */ diff --git a/arch/mn10300/unit-asb2305/include/unit/leds.h b/arch/mn10300/unit-asb2305/include/unit/leds.h new file mode 100644 index 00000000000..bc471f617fd --- /dev/null +++ b/arch/mn10300/unit-asb2305/include/unit/leds.h @@ -0,0 +1,51 @@ +/* ASB2305-specific LEDs + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _ASM_UNIT_LEDS_H +#define _ASM_UNIT_LEDS_H + +#include <asm/pio-regs.h> +#include <asm/cpu-regs.h> +#include <asm/exceptions.h> + +#define ASB2305_7SEGLEDS __SYSREG(0xA6F90000, u32) + +/* perform a hard reset by driving PIO06 low */ +#define mn10300_unit_hard_reset() \ +do { \ + P0OUT &= 0xbf; \ + P0MD = (P0MD & P0MD_6) | P0MD_6_OUT; \ +} while (0) + +/* + * use the 7-segment LEDs to indicate states + */ +/* indicate double-fault by displaying "db-f" on the LEDs */ +#define mn10300_set_dbfleds \ + mov 0x43077f1d,d0 ; \ + mov d0,(ASB2305_7SEGLEDS) + +/* flip the 7-segment LEDs between "Gdb-" and "----" */ +#define mn10300_set_gdbleds(ONOFF) \ +do { \ + ASB2305_7SEGLEDS = (ONOFF) ? 0x8543077f : 0x7f7f7f7f; \ +} while (0) + +#ifndef __ASSEMBLY__ +extern void peripheral_leds_display_exception(enum exception_code); +extern void peripheral_leds_led_chase(void); +extern void peripheral_leds7x4_display_dec(unsigned int, unsigned int); +extern void peripheral_leds7x4_display_hex(unsigned int, unsigned int); +extern void peripheral_leds7x4_display_minssecs(unsigned int, unsigned int); +extern void peripheral_leds7x4_display_rtc(void); +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_UNIT_LEDS_H */ diff --git a/arch/mn10300/unit-asb2305/include/unit/serial.h b/arch/mn10300/unit-asb2305/include/unit/serial.h new file mode 100644 index 00000000000..3bfc9093878 --- /dev/null +++ b/arch/mn10300/unit-asb2305/include/unit/serial.h @@ -0,0 +1,120 @@ +/* ASB2305-specific 8250 serial ports + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_UNIT_SERIAL_H +#define _ASM_UNIT_SERIAL_H + +#include <asm/cpu/cpu-regs.h> +#include <proc/irq.h> +#include <linux/serial_reg.h> + +#define SERIAL_PORT0_BASE_ADDRESS 0xA6FB0000 +#define ASB2305_DEBUG_MCR __SYSREG(0xA6FB0000 + UART_MCR * 2, u8) + +#define SERIAL_IRQ XIRQ0 /* Dual serial (PC16552) (Hi) */ + +/* + * dispose of the /dev/ttyS0 serial port + */ +#ifndef CONFIG_GDBSTUB_ON_TTYSx + +#define SERIAL_PORT_DFNS \ + { \ + .baud_base = BASE_BAUD, \ + .irq = SERIAL_IRQ, \ + .flags = STD_COM_FLAGS, \ + .iomem_base = (u8 *) SERIAL_PORT0_BASE_ADDRESS, \ + .iomem_reg_shift = 2, \ + .io_type = SERIAL_IO_MEM, \ + }, + +#ifndef __ASSEMBLY__ + +static inline void __debug_to_serial(const char *p, int n) +{ +} + +#endif /* !__ASSEMBLY__ */ + +#else /* CONFIG_GDBSTUB_ON_TTYSx */ + +#define SERIAL_PORT_DFNS /* stolen by gdb-stub */ + +#if defined(CONFIG_GDBSTUB_ON_TTYS0) +#define GDBPORT_SERIAL_RX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_RX * 4, u8) +#define GDBPORT_SERIAL_TX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX * 4, u8) +#define GDBPORT_SERIAL_DLL __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLL * 4, u8) +#define GDBPORT_SERIAL_DLM __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLM * 4, u8) +#define GDBPORT_SERIAL_IER __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IER * 4, u8) +#define GDBPORT_SERIAL_IIR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IIR * 4, u8) +#define GDBPORT_SERIAL_FCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_FCR * 4, u8) +#define GDBPORT_SERIAL_LCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LCR * 4, u8) +#define GDBPORT_SERIAL_MCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8) +#define GDBPORT_SERIAL_LSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8) +#define GDBPORT_SERIAL_MSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8) +#define GDBPORT_SERIAL_SCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_SCR * 4, u8) +#define GDBPORT_SERIAL_IRQ SERIAL_IRQ + +#elif defined(CONFIG_GDBSTUB_ON_TTYS1) +#error The ASB2305 doesnt have a /dev/ttyS1 +#endif + +#ifndef __ASSEMBLY__ + +#define TTYS0_TX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX * 4, u8) +#define TTYS0_MCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8) +#define TTYS0_LSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8) +#define TTYS0_MSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8) + +#define LSR_WAIT_FOR(STATE) \ +do { \ + while (!(TTYS0_LSR & UART_LSR_##STATE)) {} \ +} while (0) +#define FLOWCTL_WAIT_FOR(LINE) \ +do { \ + while (!(TTYS0_MSR & UART_MSR_##LINE)) {} \ +} while (0) +#define FLOWCTL_CLEAR(LINE) \ +do { \ + TTYS0_MCR &= ~UART_MCR_##LINE; \ +} while (0) +#define FLOWCTL_SET(LINE) \ +do { \ + TTYS0_MCR |= UART_MCR_##LINE; \ +} while (0) +#define FLOWCTL_QUERY(LINE) ({ TTYS0_MSR & UART_MSR_##LINE; }) + +static inline void __debug_to_serial(const char *p, int n) +{ + char ch; + + FLOWCTL_SET(DTR); + + for (; n > 0; n--) { + LSR_WAIT_FOR(THRE); + FLOWCTL_WAIT_FOR(CTS); + + ch = *p++; + if (ch == 0x0a) { + TTYS0_TX = 0x0d; + LSR_WAIT_FOR(THRE); + FLOWCTL_WAIT_FOR(CTS); + } + TTYS0_TX = ch; + } + + FLOWCTL_CLEAR(DTR); +} + +#endif /* !__ASSEMBLY__ */ + +#endif /* CONFIG_GDBSTUB_ON_TTYSx */ + +#endif /* _ASM_UNIT_SERIAL_H */ diff --git a/arch/mn10300/unit-asb2305/include/unit/timex.h b/arch/mn10300/unit-asb2305/include/unit/timex.h new file mode 100644 index 00000000000..a71c49aa85e --- /dev/null +++ b/arch/mn10300/unit-asb2305/include/unit/timex.h @@ -0,0 +1,135 @@ +/* ASB2305 timer specifcations + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_UNIT_TIMEX_H +#define _ASM_UNIT_TIMEX_H + +#ifndef __ASSEMBLY__ +#include <linux/irq.h> +#endif /* __ASSEMBLY__ */ + +#include <asm/cpu/timer-regs.h> +#include <unit/clock.h> + +/* + * jiffies counter specifications + */ + +#define TMJCBR_MAX 0xffff +#define TMJCBC TM01BC + +#define TMJCMD TM01MD +#define TMJCBR TM01BR +#define TMJCIRQ TM1IRQ +#define TMJCICR TM1ICR +#define TMJCICR_LEVEL GxICR_LEVEL_5 + +#ifndef __ASSEMBLY__ + +static inline void startup_jiffies_counter(void) +{ + unsigned rate; + u16 md, t16; + + /* use as little prescaling as possible to avoid losing accuracy */ + md = TM0MD_SRC_IOCLK; + rate = MN10300_JCCLK / HZ; + + if (rate > TMJCBR_MAX) { + md = TM0MD_SRC_IOCLK_8; + rate = MN10300_JCCLK / 8 / HZ; + + if (rate > TMJCBR_MAX) { + md = TM0MD_SRC_IOCLK_32; + rate = MN10300_JCCLK / 32 / HZ; + + if (rate > TMJCBR_MAX) + BUG(); + } + } + + TMJCBR = rate - 1; + t16 = TMJCBR; + + TMJCMD = + md | + TM1MD_SRC_TM0CASCADE << 8 | + TM0MD_INIT_COUNTER | + TM1MD_INIT_COUNTER << 8; + + TMJCMD = + md | + TM1MD_SRC_TM0CASCADE << 8 | + TM0MD_COUNT_ENABLE | + TM1MD_COUNT_ENABLE << 8; + + t16 = TMJCMD; + + TMJCICR |= GxICR_ENABLE | GxICR_DETECT | GxICR_REQUEST; + t16 = TMJCICR; +} + +static inline void shutdown_jiffies_counter(void) +{ +} + +#endif /* !__ASSEMBLY__ */ + + +/* + * timestamp counter specifications + */ + +#define TMTSCBR_MAX 0xffffffff +#define TMTSCBC TM45BC + +#ifndef __ASSEMBLY__ + +static inline void startup_timestamp_counter(void) +{ + /* set up timer 4 & 5 cascaded as a 32-bit counter to count real time + * - count down from 4Gig-1 to 0 and wrap at IOCLK rate + */ + TM45BR = TMTSCBR_MAX; + + TM4MD = TM4MD_SRC_IOCLK; + TM4MD |= TM4MD_INIT_COUNTER; + TM4MD &= ~TM4MD_INIT_COUNTER; + TM4ICR = 0; + + TM5MD = TM5MD_SRC_TM4CASCADE; + TM5MD |= TM5MD_INIT_COUNTER; + TM5MD &= ~TM5MD_INIT_COUNTER; + TM5ICR = 0; + + TM5MD |= TM5MD_COUNT_ENABLE; + TM4MD |= TM4MD_COUNT_ENABLE; +} + +static inline void shutdown_timestamp_counter(void) +{ + TM4MD = 0; + TM5MD = 0; +} + +/* + * we use a cascaded pair of 16-bit down-counting timers to count I/O + * clock cycles for the purposes of time keeping + */ +typedef unsigned long cycles_t; + +static inline cycles_t read_timestamp_counter(void) +{ + return (cycles_t) TMTSCBC; +} + +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_UNIT_TIMEX_H */ diff --git a/arch/mn10300/unit-asb2305/leds.c b/arch/mn10300/unit-asb2305/leds.c index e99dcc9cee1..d345ff9042d 100644 --- a/arch/mn10300/unit-asb2305/leds.c +++ b/arch/mn10300/unit-asb2305/leds.c @@ -15,7 +15,7 @@ #include <asm/processor.h> #include <asm/cpu/intctl-regs.h> #include <asm/cpu/rtc-regs.h> -#include <asm/unit/leds.h> +#include <unit/leds.h> static const u8 asb2305_led_hex_tbl[16] = { 0x80, 0xf2, 0x48, 0x60, 0x32, 0x24, 0x04, 0xf0, diff --git a/arch/mn10300/unit-asb2305/unit-init.c b/arch/mn10300/unit-asb2305/unit-init.c index 72812a9439a..1c452cc3f6e 100644 --- a/arch/mn10300/unit-asb2305/unit-init.c +++ b/arch/mn10300/unit-asb2305/unit-init.c @@ -18,7 +18,7 @@ #include <asm/cpu/intctl-regs.h> #include <asm/cpu/rtc-regs.h> #include <asm/cpu/serial-regs.h> -#include <asm/unit/serial.h> +#include <unit/serial.h> /* * initialise some of the unit hardware before gdbstub is set up diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 9e08d8a69fd..5b50e1ac617 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -316,7 +316,7 @@ config ARCH_ENABLE_MEMORY_HOTREMOVE config KEXEC bool "kexec system call (EXPERIMENTAL)" - depends on BOOK3S && EXPERIMENTAL + depends on PPC_BOOK3S && EXPERIMENTAL help kexec is a system call that implements the ability to shutdown your current kernel, and to start another kernel. It is like a reboot @@ -775,6 +775,7 @@ config LOWMEM_CAM_NUM_BOOL Say N here unless you know what you are doing. config LOWMEM_CAM_NUM + depends on FSL_BOOKE int "Number of CAMs to use to map low memory" if LOWMEM_CAM_NUM_BOOL default 3 diff --git a/arch/powerpc/boot/dts/ksi8560.dts b/arch/powerpc/boot/dts/ksi8560.dts index 308fe7c29de..c9cfd374bff 100644 --- a/arch/powerpc/boot/dts/ksi8560.dts +++ b/arch/powerpc/boot/dts/ksi8560.dts @@ -57,14 +57,14 @@ bus-frequency = <0>; /* Fixed by bootwrapper */ memory-controller@2000 { - compatible = "fsl,8540-memory-controller"; + compatible = "fsl,mpc8540-memory-controller"; reg = <0x2000 0x1000>; interrupt-parent = <&mpic>; interrupts = <0x12 0x2>; }; L2: l2-cache-controller@20000 { - compatible = "fsl,8540-l2-cache-controller"; + compatible = "fsl,mpc8540-l2-cache-controller"; reg = <0x20000 0x1000>; cache-line-size = <0x20>; /* 32 bytes */ cache-size = <0x40000>; /* L2, 256K */ diff --git a/arch/powerpc/boot/dts/pq2fads.dts b/arch/powerpc/boot/dts/pq2fads.dts index b2d61091b36..0bb66937674 100644 --- a/arch/powerpc/boot/dts/pq2fads.dts +++ b/arch/powerpc/boot/dts/pq2fads.dts @@ -17,6 +17,14 @@ #address-cells = <1>; #size-cells = <1>; + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -45,7 +53,7 @@ #size-cells = <1>; reg = <0xf0010100 0x60>; - ranges = <0x0 0x0 0xfe000000 0x800000 + ranges = <0x0 0x0 0xff800000 0x800000 0x1 0x0 0xf4500000 0x8000 0x8 0x0 0xf8200000 0x8000>; @@ -71,7 +79,7 @@ }; }; - pci@f0010800 { + pci0: pci@f0010800 { device_type = "pci"; reg = <0xf0010800 0x10c 0xf00101ac 0x8 0xf00101c4 0x8>; compatible = "fsl,mpc8280-pci", "fsl,pq2-pci"; @@ -142,7 +150,7 @@ reg = <0x119f0 0x10 0x115f0 0x10>; }; - serial@11a00 { + serial0: serial@11a00 { device_type = "serial"; compatible = "fsl,mpc8280-scc-uart", "fsl,cpm2-scc-uart"; @@ -153,7 +161,7 @@ fsl,cpm-command = <0x800000>; }; - serial@11a20 { + serial1: serial@11a20 { device_type = "serial"; compatible = "fsl,mpc8280-scc-uart", "fsl,cpm2-scc-uart"; @@ -164,7 +172,7 @@ fsl,cpm-command = <0x4a00000>; }; - ethernet@11320 { + enet0: ethernet@11320 { device_type = "network"; compatible = "fsl,mpc8280-fcc-enet", "fsl,cpm2-fcc-enet"; @@ -176,7 +184,7 @@ fsl,cpm-command = <0x16200300>; }; - ethernet@11340 { + enet1: ethernet@11340 { device_type = "network"; compatible = "fsl,mpc8280-fcc-enet", "fsl,cpm2-fcc-enet"; diff --git a/arch/powerpc/boot/dts/sbc8548.dts b/arch/powerpc/boot/dts/sbc8548.dts index 9c5079fec4f..b1f1416ac99 100644 --- a/arch/powerpc/boot/dts/sbc8548.dts +++ b/arch/powerpc/boot/dts/sbc8548.dts @@ -156,14 +156,14 @@ compatible = "simple-bus"; memory-controller@2000 { - compatible = "fsl,8548-memory-controller"; + compatible = "fsl,mpc8548-memory-controller"; reg = <0x2000 0x1000>; interrupt-parent = <&mpic>; interrupts = <0x12 0x2>; }; L2: l2-cache-controller@20000 { - compatible = "fsl,8548-l2-cache-controller"; + compatible = "fsl,mpc8548-l2-cache-controller"; reg = <0x20000 0x1000>; cache-line-size = <0x20>; // 32 bytes cache-size = <0x80000>; // L2, 512K diff --git a/arch/powerpc/boot/dts/sbc8560.dts b/arch/powerpc/boot/dts/sbc8560.dts index b772405a9a0..c4564b81e47 100644 --- a/arch/powerpc/boot/dts/sbc8560.dts +++ b/arch/powerpc/boot/dts/sbc8560.dts @@ -61,14 +61,14 @@ clock-frequency = <0>; memory-controller@2000 { - compatible = "fsl,8560-memory-controller"; + compatible = "fsl,mpc8560-memory-controller"; reg = <0x2000 0x1000>; interrupt-parent = <&mpic>; interrupts = <0x12 0x2>; }; L2: l2-cache-controller@20000 { - compatible = "fsl,8560-l2-cache-controller"; + compatible = "fsl,mpc8560-l2-cache-controller"; reg = <0x20000 0x1000>; cache-line-size = <0x20>; // 32 bytes cache-size = <0x40000>; // L2, 256K diff --git a/arch/powerpc/boot/dts/socrates.dts b/arch/powerpc/boot/dts/socrates.dts index b8d0fc6f004..7a6ae75a1e5 100644 --- a/arch/powerpc/boot/dts/socrates.dts +++ b/arch/powerpc/boot/dts/socrates.dts @@ -52,6 +52,7 @@ soc8544@e0000000 { #address-cells = <1>; #size-cells = <1>; + device_type = "soc"; ranges = <0x00000000 0xe0000000 0x00100000>; reg = <0xe0000000 0x00001000>; // CCSRBAR 1M @@ -78,11 +79,11 @@ #address-cells = <1>; #size-cells = <0>; cell-index = <0>; - compatible = "fsl-i2c"; + compatible = "fsl,mpc8544-i2c", "fsl-i2c"; reg = <0x3000 0x100>; interrupts = <43 2>; interrupt-parent = <&mpic>; - dfsrr; + fsl,preserve-clocking; dtt@28 { compatible = "winbond,w83782d"; @@ -110,11 +111,11 @@ #address-cells = <1>; #size-cells = <0>; cell-index = <1>; - compatible = "fsl-i2c"; + compatible = "fsl,mpc8544-i2c", "fsl-i2c"; reg = <0x3100 0x100>; interrupts = <43 2>; interrupt-parent = <&mpic>; - dfsrr; + fsl,preserve-clocking; }; enet0: ethernet@24000 { diff --git a/arch/powerpc/boot/dts/stx_gp3_8560.dts b/arch/powerpc/boot/dts/stx_gp3_8560.dts index 8b173957fb5..ea6b15152de 100644 --- a/arch/powerpc/boot/dts/stx_gp3_8560.dts +++ b/arch/powerpc/boot/dts/stx_gp3_8560.dts @@ -57,14 +57,14 @@ compatible = "fsl,mpc8560-immr", "simple-bus"; memory-controller@2000 { - compatible = "fsl,8540-memory-controller"; + compatible = "fsl,mpc8540-memory-controller"; reg = <0x2000 0x1000>; interrupt-parent = <&mpic>; interrupts = <18 2>; }; L2: l2-cache-controller@20000 { - compatible = "fsl,8540-l2-cache-controller"; + compatible = "fsl,mpc8540-l2-cache-controller"; reg = <0x20000 0x1000>; cache-line-size = <32>; cache-size = <0x40000>; // L2, 256K diff --git a/arch/powerpc/boot/dts/tqm8540.dts b/arch/powerpc/boot/dts/tqm8540.dts index ac9413a29f9..231bae75663 100644 --- a/arch/powerpc/boot/dts/tqm8540.dts +++ b/arch/powerpc/boot/dts/tqm8540.dts @@ -59,14 +59,14 @@ compatible = "fsl,mpc8540-immr", "simple-bus"; memory-controller@2000 { - compatible = "fsl,8540-memory-controller"; + compatible = "fsl,mpc8540-memory-controller"; reg = <0x2000 0x1000>; interrupt-parent = <&mpic>; interrupts = <18 2>; }; L2: l2-cache-controller@20000 { - compatible = "fsl,8540-l2-cache-controller"; + compatible = "fsl,mpc8540-l2-cache-controller"; reg = <0x20000 0x1000>; cache-line-size = <32>; cache-size = <0x40000>; // L2, 256K diff --git a/arch/powerpc/boot/dts/tqm8541.dts b/arch/powerpc/boot/dts/tqm8541.dts index c71bb5dd5e5..4356a1f0829 100644 --- a/arch/powerpc/boot/dts/tqm8541.dts +++ b/arch/powerpc/boot/dts/tqm8541.dts @@ -58,14 +58,14 @@ compatible = "fsl,mpc8541-immr", "simple-bus"; memory-controller@2000 { - compatible = "fsl,8540-memory-controller"; + compatible = "fsl,mpc8540-memory-controller"; reg = <0x2000 0x1000>; interrupt-parent = <&mpic>; interrupts = <18 2>; }; L2: l2-cache-controller@20000 { - compatible = "fsl,8540-l2-cache-controller"; + compatible = "fsl,mpc8540-l2-cache-controller"; reg = <0x20000 0x1000>; cache-line-size = <32>; cache-size = <0x40000>; // L2, 256K diff --git a/arch/powerpc/boot/dts/tqm8548-bigflash.dts b/arch/powerpc/boot/dts/tqm8548-bigflash.dts index 28b1a95257c..19aa72301c8 100644 --- a/arch/powerpc/boot/dts/tqm8548-bigflash.dts +++ b/arch/powerpc/boot/dts/tqm8548-bigflash.dts @@ -397,10 +397,13 @@ upm@3,0 { #address-cells = <0>; #size-cells = <0>; - compatible = "fsl,upm-nand"; + compatible = "tqc,tqm8548-upm-nand", "fsl,upm-nand"; reg = <3 0x0 0x800>; fsl,upm-addr-offset = <0x10>; fsl,upm-cmd-offset = <0x08>; + /* Micron MT29F8G08FAB multi-chip device */ + fsl,upm-addr-line-cs-offsets = <0x0 0x200>; + fsl,upm-wait-flags = <0x5>; chip-delay = <25>; // in micro-seconds nand@0 { @@ -409,7 +412,7 @@ partition@0 { label = "fs"; - reg = <0x00000000 0x01000000>; + reg = <0x00000000 0x10000000>; }; }; }; diff --git a/arch/powerpc/boot/dts/tqm8548.dts b/arch/powerpc/boot/dts/tqm8548.dts index 826fb622cd3..49145a04fc6 100644 --- a/arch/powerpc/boot/dts/tqm8548.dts +++ b/arch/powerpc/boot/dts/tqm8548.dts @@ -397,10 +397,13 @@ upm@3,0 { #address-cells = <0>; #size-cells = <0>; - compatible = "fsl,upm-nand"; + compatible = "tqc,tqm8548-upm-nand", "fsl,upm-nand"; reg = <3 0x0 0x800>; fsl,upm-addr-offset = <0x10>; fsl,upm-cmd-offset = <0x08>; + /* Micron MT29F8G08FAB multi-chip device */ + fsl,upm-addr-line-cs-offsets = <0x0 0x200>; + fsl,upm-wait-flags = <0x5>; chip-delay = <25>; // in micro-seconds nand@0 { @@ -409,7 +412,7 @@ partition@0 { label = "fs"; - reg = <0x00000000 0x01000000>; + reg = <0x00000000 0x10000000>; }; }; }; diff --git a/arch/powerpc/boot/dts/tqm8555.dts b/arch/powerpc/boot/dts/tqm8555.dts index a133ded6ddd..06d366ebbda 100644 --- a/arch/powerpc/boot/dts/tqm8555.dts +++ b/arch/powerpc/boot/dts/tqm8555.dts @@ -58,14 +58,14 @@ compatible = "fsl,mpc8555-immr", "simple-bus"; memory-controller@2000 { - compatible = "fsl,8540-memory-controller"; + compatible = "fsl,mpc8540-memory-controller"; reg = <0x2000 0x1000>; interrupt-parent = <&mpic>; interrupts = <18 2>; }; L2: l2-cache-controller@20000 { - compatible = "fsl,8540-l2-cache-controller"; + compatible = "fsl,mpc8540-l2-cache-controller"; reg = <0x20000 0x1000>; cache-line-size = <32>; cache-size = <0x40000>; // L2, 256K diff --git a/arch/powerpc/boot/dts/tqm8560.dts b/arch/powerpc/boot/dts/tqm8560.dts index 649e2e57626..feff915e049 100644 --- a/arch/powerpc/boot/dts/tqm8560.dts +++ b/arch/powerpc/boot/dts/tqm8560.dts @@ -60,14 +60,14 @@ compatible = "fsl,mpc8560-immr", "simple-bus"; memory-controller@2000 { - compatible = "fsl,8540-memory-controller"; + compatible = "fsl,mpc8540-memory-controller"; reg = <0x2000 0x1000>; interrupt-parent = <&mpic>; interrupts = <18 2>; }; L2: l2-cache-controller@20000 { - compatible = "fsl,8540-l2-cache-controller"; + compatible = "fsl,mpc8540-l2-cache-controller"; reg = <0x20000 0x1000>; cache-line-size = <32>; cache-size = <0x40000>; // L2, 256K diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig index 61b10084971..f1889abb89b 100644 --- a/arch/powerpc/configs/pseries_defconfig +++ b/arch/powerpc/configs/pseries_defconfig @@ -95,7 +95,7 @@ CONFIG_CGROUP_CPUACCT=y CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_PROC_PID_CPUSET=y -# CONFIG_RELAY is not set +CONFIG_RELAY=y CONFIG_NAMESPACES=y # CONFIG_UTS_NS is not set # CONFIG_IPC_NS is not set diff --git a/arch/powerpc/include/asm/lppaca.h b/arch/powerpc/include/asm/lppaca.h index 68235f7e4a8..d2a65e8ca6a 100644 --- a/arch/powerpc/include/asm/lppaca.h +++ b/arch/powerpc/include/asm/lppaca.h @@ -125,7 +125,7 @@ struct lppaca { // NOTE: This value will ALWAYS be zero for dedicated processors and // will NEVER be zero for shared processors (ie, initialized to a 1). volatile u32 yield_count; // PLIC increments each dispatchx00-x03 - u32 reserved6; + volatile u32 dispersion_count; // dispatch changed phys cpu x04-x07 volatile u64 cmo_faults; // CMO page fault count x08-x0F volatile u64 cmo_fault_time; // CMO page fault time x10-x17 u8 reserved7[104]; // Reserved x18-x7F diff --git a/arch/powerpc/include/asm/mpic.h b/arch/powerpc/include/asm/mpic.h index c2ccca53b99..a002682f3a6 100644 --- a/arch/powerpc/include/asm/mpic.h +++ b/arch/powerpc/include/asm/mpic.h @@ -22,6 +22,14 @@ #define MPIC_GREG_FEATURE_1 0x00010 #define MPIC_GREG_GLOBAL_CONF_0 0x00020 #define MPIC_GREG_GCONF_RESET 0x80000000 +/* On the FSL mpic implementations the Mode field is expand to be + * 2 bits wide: + * 0b00 = pass through (interrupts routed to IRQ0) + * 0b01 = Mixed mode + * 0b10 = reserved + * 0b11 = External proxy / coreint + */ +#define MPIC_GREG_GCONF_COREINT 0x60000000 #define MPIC_GREG_GCONF_8259_PTHROU_DIS 0x20000000 #define MPIC_GREG_GCONF_NO_BIAS 0x10000000 #define MPIC_GREG_GCONF_BASE_MASK 0x000fffff @@ -357,6 +365,8 @@ struct mpic #define MPIC_BROKEN_FRR_NIRQS 0x00000800 /* Destination only supports a single CPU at a time */ #define MPIC_SINGLE_DEST_CPU 0x00001000 +/* Enable CoreInt delivery of interrupts */ +#define MPIC_ENABLE_COREINT 0x00002000 /* MPIC HW modification ID */ #define MPIC_REGSET_MASK 0xf0000000 @@ -470,6 +480,8 @@ extern void mpic_end_irq(unsigned int irq); extern unsigned int mpic_get_one_irq(struct mpic *mpic); /* This one gets from the primary mpic */ extern unsigned int mpic_get_irq(void); +/* This one gets from the primary mpic via CoreInt*/ +extern unsigned int mpic_get_coreint_irq(void); /* Fetch Machine Check interrupt from primary mpic */ extern unsigned int mpic_get_mcirq(void); diff --git a/arch/powerpc/include/asm/ps3fb.h b/arch/powerpc/include/asm/ps3fb.h index 90dbefb8cfc..e7233a84968 100644 --- a/arch/powerpc/include/asm/ps3fb.h +++ b/arch/powerpc/include/asm/ps3fb.h @@ -21,7 +21,6 @@ #include <linux/types.h> #include <linux/ioctl.h> -#include <linux/types.h> /* ioctl */ #define PS3FB_IOCTL_SETMODE _IOW('r', 1, int) /* set video mode */ diff --git a/arch/powerpc/include/asm/pte-common.h b/arch/powerpc/include/asm/pte-common.h index d9740e88680..a7e210b6b48 100644 --- a/arch/powerpc/include/asm/pte-common.h +++ b/arch/powerpc/include/asm/pte-common.h @@ -151,9 +151,11 @@ extern unsigned long bad_call_to_PMD_PAGE_SIZE(void); _PAGE_NO_CACHE) #define PAGE_KERNEL_NCG __pgprot(_PAGE_BASE_NC | _PAGE_KERNEL_RW | \ _PAGE_NO_CACHE | _PAGE_GUARDED) -#define PAGE_KERNEL_X __pgprot(_PAGE_BASE | _PAGE_KERNEL_RW | _PAGE_EXEC) +#define PAGE_KERNEL_X __pgprot(_PAGE_BASE | _PAGE_KERNEL_RW | _PAGE_EXEC | \ + _PAGE_HWEXEC) #define PAGE_KERNEL_RO __pgprot(_PAGE_BASE | _PAGE_KERNEL_RO) -#define PAGE_KERNEL_ROX __pgprot(_PAGE_BASE | _PAGE_KERNEL_RO | _PAGE_EXEC) +#define PAGE_KERNEL_ROX __pgprot(_PAGE_BASE | _PAGE_KERNEL_RO | _PAGE_EXEC | \ + _PAGE_HWEXEC) /* Protection used for kernel text. We want the debuggers to be able to * set breakpoints anywhere, so don't write protect the kernel text diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h index c9ff1ec9747..e8018d540e8 100644 --- a/arch/powerpc/include/asm/reg.h +++ b/arch/powerpc/include/asm/reg.h @@ -143,6 +143,36 @@ #define FPSCR_NI 0x00000004 /* FPU non IEEE-Mode */ #define FPSCR_RN 0x00000003 /* FPU rounding control */ +/* Bit definitions for SPEFSCR. */ +#define SPEFSCR_SOVH 0x80000000 /* Summary integer overflow high */ +#define SPEFSCR_OVH 0x40000000 /* Integer overflow high */ +#define SPEFSCR_FGH 0x20000000 /* Embedded FP guard bit high */ +#define SPEFSCR_FXH 0x10000000 /* Embedded FP sticky bit high */ +#define SPEFSCR_FINVH 0x08000000 /* Embedded FP invalid operation high */ +#define SPEFSCR_FDBZH 0x04000000 /* Embedded FP div by zero high */ +#define SPEFSCR_FUNFH 0x02000000 /* Embedded FP underflow high */ +#define SPEFSCR_FOVFH 0x01000000 /* Embedded FP overflow high */ +#define SPEFSCR_FINXS 0x00200000 /* Embedded FP inexact sticky */ +#define SPEFSCR_FINVS 0x00100000 /* Embedded FP invalid op. sticky */ +#define SPEFSCR_FDBZS 0x00080000 /* Embedded FP div by zero sticky */ +#define SPEFSCR_FUNFS 0x00040000 /* Embedded FP underflow sticky */ +#define SPEFSCR_FOVFS 0x00020000 /* Embedded FP overflow sticky */ +#define SPEFSCR_MODE 0x00010000 /* Embedded FP mode */ +#define SPEFSCR_SOV 0x00008000 /* Integer summary overflow */ +#define SPEFSCR_OV 0x00004000 /* Integer overflow */ +#define SPEFSCR_FG 0x00002000 /* Embedded FP guard bit */ +#define SPEFSCR_FX 0x00001000 /* Embedded FP sticky bit */ +#define SPEFSCR_FINV 0x00000800 /* Embedded FP invalid operation */ +#define SPEFSCR_FDBZ 0x00000400 /* Embedded FP div by zero */ +#define SPEFSCR_FUNF 0x00000200 /* Embedded FP underflow */ +#define SPEFSCR_FOVF 0x00000100 /* Embedded FP overflow */ +#define SPEFSCR_FINXE 0x00000040 /* Embedded FP inexact enable */ +#define SPEFSCR_FINVE 0x00000020 /* Embedded FP invalid op. enable */ +#define SPEFSCR_FDBZE 0x00000010 /* Embedded FP div by zero enable */ +#define SPEFSCR_FUNFE 0x00000008 /* Embedded FP underflow enable */ +#define SPEFSCR_FOVFE 0x00000004 /* Embedded FP overflow enable */ +#define SPEFSCR_FRMC 0x00000003 /* Embedded FP rounding mode control */ + /* Special Purpose Registers (SPRNs)*/ #define SPRN_CTR 0x009 /* Count Register */ #define SPRN_DSCR 0x11 diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h index a56f4d61aa7..601ddbc4600 100644 --- a/arch/powerpc/include/asm/reg_booke.h +++ b/arch/powerpc/include/asm/reg_booke.h @@ -423,36 +423,6 @@ #define SGR_NORMAL 0 /* Speculative fetching allowed. */ #define SGR_GUARDED 1 /* Speculative fetching disallowed. */ -/* Bit definitions for SPEFSCR. */ -#define SPEFSCR_SOVH 0x80000000 /* Summary integer overflow high */ -#define SPEFSCR_OVH 0x40000000 /* Integer overflow high */ -#define SPEFSCR_FGH 0x20000000 /* Embedded FP guard bit high */ -#define SPEFSCR_FXH 0x10000000 /* Embedded FP sticky bit high */ -#define SPEFSCR_FINVH 0x08000000 /* Embedded FP invalid operation high */ -#define SPEFSCR_FDBZH 0x04000000 /* Embedded FP div by zero high */ -#define SPEFSCR_FUNFH 0x02000000 /* Embedded FP underflow high */ -#define SPEFSCR_FOVFH 0x01000000 /* Embedded FP overflow high */ -#define SPEFSCR_FINXS 0x00200000 /* Embedded FP inexact sticky */ -#define SPEFSCR_FINVS 0x00100000 /* Embedded FP invalid op. sticky */ -#define SPEFSCR_FDBZS 0x00080000 /* Embedded FP div by zero sticky */ -#define SPEFSCR_FUNFS 0x00040000 /* Embedded FP underflow sticky */ -#define SPEFSCR_FOVFS 0x00020000 /* Embedded FP overflow sticky */ -#define SPEFSCR_MODE 0x00010000 /* Embedded FP mode */ -#define SPEFSCR_SOV 0x00008000 /* Integer summary overflow */ -#define SPEFSCR_OV 0x00004000 /* Integer overflow */ -#define SPEFSCR_FG 0x00002000 /* Embedded FP guard bit */ -#define SPEFSCR_FX 0x00001000 /* Embedded FP sticky bit */ -#define SPEFSCR_FINV 0x00000800 /* Embedded FP invalid operation */ -#define SPEFSCR_FDBZ 0x00000400 /* Embedded FP div by zero */ -#define SPEFSCR_FUNF 0x00000200 /* Embedded FP underflow */ -#define SPEFSCR_FOVF 0x00000100 /* Embedded FP overflow */ -#define SPEFSCR_FINXE 0x00000040 /* Embedded FP inexact enable */ -#define SPEFSCR_FINVE 0x00000020 /* Embedded FP invalid op. enable */ -#define SPEFSCR_FDBZE 0x00000010 /* Embedded FP div by zero enable */ -#define SPEFSCR_FUNFE 0x00000008 /* Embedded FP underflow enable */ -#define SPEFSCR_FOVFE 0x00000004 /* Embedded FP overflow enable */ -#define SPEFSCR_FRMC 0x00000003 /* Embedded FP rounding mode control */ - /* * The IBM-403 is an even more odd special case, as it is much * older than the IBM-405 series. We put these down here incase someone diff --git a/arch/powerpc/include/asm/rtas.h b/arch/powerpc/include/asm/rtas.h index 0aa0315fb7e..01c12339b30 100644 --- a/arch/powerpc/include/asm/rtas.h +++ b/arch/powerpc/include/asm/rtas.h @@ -68,7 +68,8 @@ struct rtas_t { #define RTAS_EPOW_WARNING 0x40000000 /* set bit 1 */ #define RTAS_POWERMGM_EVENTS 0x20000000 /* set bit 2 */ #define RTAS_HOTPLUG_EVENTS 0x10000000 /* set bit 3 */ -#define RTAS_EVENT_SCAN_ALL_EVENTS 0xf0000000 +#define RTAS_IO_EVENTS 0x08000000 /* set bit 4 */ +#define RTAS_EVENT_SCAN_ALL_EVENTS 0xffffffff /* RTAS event severity */ #define RTAS_SEVERITY_FATAL 0x5 diff --git a/arch/powerpc/include/asm/sfp-machine.h b/arch/powerpc/include/asm/sfp-machine.h index 3d9f831c3c5..3a7a67a0d00 100644 --- a/arch/powerpc/include/asm/sfp-machine.h +++ b/arch/powerpc/include/asm/sfp-machine.h @@ -29,9 +29,9 @@ /* basic word size definitions */ #define _FP_W_TYPE_SIZE 32 -#define _FP_W_TYPE unsigned long -#define _FP_WS_TYPE signed long -#define _FP_I_TYPE long +#define _FP_W_TYPE unsigned int +#define _FP_WS_TYPE signed int +#define _FP_I_TYPE int #define __ll_B ((UWtype) 1 << (W_TYPE_SIZE / 2)) #define __ll_lowpart(t) ((UWtype) (t) & (__ll_B - 1)) diff --git a/arch/powerpc/include/asm/systbl.h b/arch/powerpc/include/asm/systbl.h index fe166491e9d..d98a30dfd41 100644 --- a/arch/powerpc/include/asm/systbl.h +++ b/arch/powerpc/include/asm/systbl.h @@ -322,3 +322,6 @@ SYSCALL_SPU(epoll_create1) SYSCALL_SPU(dup3) SYSCALL_SPU(pipe2) SYSCALL(inotify_init1) +SYSCALL(ni_syscall) +COMPAT_SYS_SPU(preadv) +COMPAT_SYS_SPU(pwritev) diff --git a/arch/powerpc/include/asm/unistd.h b/arch/powerpc/include/asm/unistd.h index e07d0c76ed7..3f06f8ec81c 100644 --- a/arch/powerpc/include/asm/unistd.h +++ b/arch/powerpc/include/asm/unistd.h @@ -341,10 +341,12 @@ #define __NR_dup3 316 #define __NR_pipe2 317 #define __NR_inotify_init1 318 +#define __NR_preadv 320 +#define __NR_pwritev 321 #ifdef __KERNEL__ -#define __NR_syscalls 319 +#define __NR_syscalls 322 #define __NR__exit __NR_exit #define NR_syscalls __NR_syscalls diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c index 1c5c8a6fc12..53c7788cba7 100644 --- a/arch/powerpc/kernel/dma.c +++ b/arch/powerpc/kernel/dma.c @@ -94,7 +94,7 @@ static int dma_direct_dma_supported(struct device *dev, u64 mask) * done via some global so platforms can set the limit in case * they have limited DMA windows */ - return mask >= DMA_32BIT_MASK; + return mask >= DMA_BIT_MASK(32); #else return 1; #endif diff --git a/arch/powerpc/kernel/fpu.S b/arch/powerpc/kernel/fpu.S index a088c064ae4..2436df33c6f 100644 --- a/arch/powerpc/kernel/fpu.S +++ b/arch/powerpc/kernel/fpu.S @@ -145,6 +145,11 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX) beq 1f PPC_LL r4,_MSR-STACK_FRAME_OVERHEAD(r5) li r3,MSR_FP|MSR_FE0|MSR_FE1 +#ifdef CONFIG_VSX +BEGIN_FTR_SECTION + oris r3,r3,MSR_VSX@h +END_FTR_SECTION_IFSET(CPU_FTR_VSX) +#endif andc r4,r4,r3 /* disable FP for previous task */ PPC_STL r4,_MSR-STACK_FRAME_OVERHEAD(r5) 1: diff --git a/arch/powerpc/kernel/ftrace.c b/arch/powerpc/kernel/ftrace.c index 5455943f16a..70e2a736be1 100644 --- a/arch/powerpc/kernel/ftrace.c +++ b/arch/powerpc/kernel/ftrace.c @@ -293,7 +293,7 @@ __ftrace_make_nop(struct module *mod, if (tramp & 0x8000) tramp -= 0x10000; - pr_debug(" %x ", tramp); + pr_debug(" %lx ", tramp); if (tramp != addr) { printk(KERN_ERR @@ -564,7 +564,7 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr) if (unlikely(atomic_read(¤t->tracing_graph_pause))) return; -#if CONFIG_PPC64 +#ifdef CONFIG_PPC64 /* non core kernel code needs to save and restore the TOC */ if (REGION_ID(self_addr) != KERNEL_REGION_ID) return_hooker = (unsigned long)&mod_return_to_handler; diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 5576147e57b..8c1a4966867 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -672,11 +672,13 @@ unsigned int irq_create_mapping(struct irq_host *host, return NO_IRQ; } } - pr_debug("irq: -> obtained virq %d\n", virq); if (irq_setup_virq(host, virq, hwirq)) return NO_IRQ; + printk(KERN_DEBUG "irq: irq %lu on host %s mapped to virtual irq %u\n", + hwirq, host->of_node ? host->of_node->full_name : "null", virq); + return virq; } EXPORT_SYMBOL_GPL(irq_create_mapping); diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c index 182e0f642f3..78b3f7840ad 100644 --- a/arch/powerpc/kernel/lparcfg.c +++ b/arch/powerpc/kernel/lparcfg.c @@ -434,6 +434,21 @@ static void pseries_cmo_data(struct seq_file *m) seq_printf(m, "cmo_page_size=%lu\n", cmo_get_page_size()); } +static void splpar_dispatch_data(struct seq_file *m) +{ + int cpu; + unsigned long dispatches = 0; + unsigned long dispatch_dispersions = 0; + + for_each_possible_cpu(cpu) { + dispatches += lppaca[cpu].yield_count; + dispatch_dispersions += lppaca[cpu].dispersion_count; + } + + seq_printf(m, "dispatches=%lu\n", dispatches); + seq_printf(m, "dispatch_dispersions=%lu\n", dispatch_dispersions); +} + static int pseries_lparcfg_data(struct seq_file *m, void *v) { int partition_potential_processors; @@ -460,6 +475,7 @@ static int pseries_lparcfg_data(struct seq_file *m, void *v) parse_ppp_data(m); parse_mpp_data(m); pseries_cmo_data(m); + splpar_dispatch_data(m); seq_printf(m, "purr=%ld\n", get_purr()); } else { /* non SPLPAR case */ diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S index 3053fe5c62f..b9530b2395a 100644 --- a/arch/powerpc/kernel/misc_64.S +++ b/arch/powerpc/kernel/misc_64.S @@ -495,7 +495,15 @@ _GLOBAL(giveup_altivec) stvx vr0,r4,r3 beq 1f ld r4,_MSR-STACK_FRAME_OVERHEAD(r5) +#ifdef CONFIG_VSX +BEGIN_FTR_SECTION + lis r3,(MSR_VEC|MSR_VSX)@h +FTR_SECTION_ELSE + lis r3,MSR_VEC@h +ALT_FTR_SECTION_END_IFSET(CPU_FTR_VSX) +#else lis r3,MSR_VEC@h +#endif andc r4,r4,r3 /* disable FP for previous task */ std r4,_MSR-STACK_FRAME_OVERHEAD(r5) 1: diff --git a/arch/powerpc/kernel/of_platform.c b/arch/powerpc/kernel/of_platform.c index 3f37a6e6277..87df428e358 100644 --- a/arch/powerpc/kernel/of_platform.c +++ b/arch/powerpc/kernel/of_platform.c @@ -76,7 +76,7 @@ struct of_device* of_platform_device_create(struct device_node *np, return NULL; dev->dma_mask = 0xffffffffUL; - dev->dev.coherent_dma_mask = DMA_32BIT_MASK; + dev->dev.coherent_dma_mask = DMA_BIT_MASK(32); dev->dev.bus = &of_platform_bus_type; diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index 2e026c0407d..2f0e64b5364 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -614,7 +614,7 @@ static unsigned char ibm_architecture_vec[] = { W(0xffffffff), /* virt_base */ W(0xffffffff), /* virt_size */ W(0xffffffff), /* load_base */ - W(64), /* 128MB min RMA */ + W(64), /* 64MB min RMA */ W(0xffffffff), /* full client load */ 0, /* min RMA percentage of total RAM */ 48, /* max log_2(hash table size) */ @@ -732,15 +732,17 @@ static void __init prom_send_capabilities(void) root = call_prom("open", 1, 1, ADDR("/")); if (root != 0) { /* try calling the ibm,client-architecture-support method */ + prom_printf("Calling ibm,client-architecture..."); if (call_prom_ret("call-method", 3, 2, &ret, ADDR("ibm,client-architecture-support"), root, ADDR(ibm_architecture_vec)) == 0) { /* the call exists... */ if (ret) - prom_printf("WARNING: ibm,client-architecture" + prom_printf("\nWARNING: ibm,client-architecture" "-support call FAILED!\n"); call_prom("close", 1, 0, root); + prom_printf(" done\n"); return; } call_prom("close", 1, 0, root); @@ -1083,7 +1085,7 @@ static void __init prom_instantiate_rtas(void) return; } - prom_printf("instantiating rtas at 0x%x ...", base); + prom_printf("instantiating rtas at 0x%x...", base); if (call_prom_ret("call-method", 3, 2, &entry, ADDR("instantiate-rtas"), @@ -1495,7 +1497,7 @@ static int __init prom_find_machine_type(void) return PLATFORM_GENERIC; x = prom_getproplen(rtas, "ibm,hypertas-functions"); if (x != PROM_ERROR) { - prom_printf("Hypertas detected, assuming LPAR !\n"); + prom_debug("Hypertas detected, assuming LPAR !\n"); return PLATFORM_PSERIES_LPAR; } return PLATFORM_PSERIES; @@ -1544,7 +1546,7 @@ static void __init prom_check_displays(void) }; const unsigned char *clut; - prom_printf("Looking for displays\n"); + prom_debug("Looking for displays\n"); for (node = 0; prom_next_node(&node); ) { memset(type, 0, sizeof(type)); prom_getprop(node, "device_type", type, sizeof(type)); @@ -1562,7 +1564,7 @@ static void __init prom_check_displays(void) if (call_prom("package-to-path", 3, 1, node, path, PROM_SCRATCH_SIZE-10) == PROM_ERROR) continue; - prom_printf("found display : %s, opening ... ", path); + prom_printf("found display : %s, opening... ", path); ih = call_prom("open", 1, 1, path); if (ih == 0) { @@ -2387,7 +2389,7 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, /* * Now finally create the flattened device-tree */ - prom_printf("copying OF device tree ...\n"); + prom_printf("copying OF device tree...\n"); flatten_device_tree(); /* @@ -2402,7 +2404,7 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, * Call OF "quiesce" method to shut down pending DMA's from * devices etc... */ - prom_printf("Calling quiesce ...\n"); + prom_printf("Calling quiesce...\n"); call_prom("quiesce", 0, 0); /* diff --git a/arch/powerpc/kernel/ptrace32.c b/arch/powerpc/kernel/ptrace32.c index 197d49c790a..297632cba04 100644 --- a/arch/powerpc/kernel/ptrace32.c +++ b/arch/powerpc/kernel/ptrace32.c @@ -67,7 +67,8 @@ static long compat_ptrace_old(struct task_struct *child, long request, /* Macros to workout the correct index for the FPR in the thread struct */ #define FPRNUMBER(i) (((i) - PT_FPR0) >> 1) #define FPRHALF(i) (((i) - PT_FPR0) & 1) -#define FPRINDEX(i) TS_FPRWIDTH * FPRNUMBER(i) + FPRHALF(i) +#define FPRINDEX(i) TS_FPRWIDTH * FPRNUMBER(i) * 2 + FPRHALF(i) +#define FPRINDEX_3264(i) (TS_FPRWIDTH * ((i) - PT_FPR0)) long compat_arch_ptrace(struct task_struct *child, compat_long_t request, compat_ulong_t caddr, compat_ulong_t cdata) @@ -168,8 +169,9 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request, CHECK_FULL_REGS(child->thread.regs); if (numReg >= PT_FPR0) { flush_fp_to_thread(child); - tmp = ((unsigned long int *)child->thread.fpr) - [FPRINDEX(numReg)]; + /* get 64 bit FPR */ + tmp = ((u64 *)child->thread.fpr) + [FPRINDEX_3264(numReg)]; } else { /* register within PT_REGS struct */ tmp = ptrace_get_reg(child, numReg); } @@ -262,8 +264,13 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request, freg = (freg & 0xfffffffful) | (data << 32); ret = ptrace_put_reg(child, numReg, freg); } else { + u64 *tmp; flush_fp_to_thread(child); - ((unsigned int *)child->thread.regs)[index] = data; + /* get 64 bit FPR ... */ + tmp = &(((u64 *)child->thread.fpr) + [FPRINDEX_3264(numReg)]); + /* ... write the 32 bit part we want */ + ((u32 *)tmp)[index % 2] = data; ret = 0; } break; diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c index 9774f9fed96..02fed27af7f 100644 --- a/arch/powerpc/kernel/setup-common.c +++ b/arch/powerpc/kernel/setup-common.c @@ -36,7 +36,6 @@ #include <linux/percpu.h> #include <linux/lmb.h> #include <linux/of_platform.h> -#include <linux/platform_device.h> #include <asm/io.h> #include <asm/prom.h> #include <asm/processor.h> diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c index 5744527a7f2..bed4690de39 100644 --- a/arch/powerpc/platforms/cell/iommu.c +++ b/arch/powerpc/platforms/cell/iommu.c @@ -644,7 +644,7 @@ static void dma_fixed_unmap_sg(struct device *dev, struct scatterlist *sg, static int dma_fixed_dma_supported(struct device *dev, u64 mask) { - return mask == DMA_64BIT_MASK; + return mask == DMA_BIT_MASK(64); } static int dma_set_mask_and_switch(struct device *dev, u64 dma_mask); diff --git a/arch/powerpc/platforms/iseries/iommu.c b/arch/powerpc/platforms/iseries/iommu.c index 6ed75bffc8a..ff43f1fd834 100644 --- a/arch/powerpc/platforms/iseries/iommu.c +++ b/arch/powerpc/platforms/iseries/iommu.c @@ -202,7 +202,7 @@ static struct iommu_table vio_iommu_table; void *iseries_hv_alloc(size_t size, dma_addr_t *dma_handle, gfp_t flag) { return iommu_alloc_coherent(NULL, &vio_iommu_table, size, dma_handle, - DMA_32BIT_MASK, flag, -1); + DMA_BIT_MASK(32), flag, -1); } EXPORT_SYMBOL_GPL(iseries_hv_alloc); @@ -217,7 +217,7 @@ dma_addr_t iseries_hv_map(void *vaddr, size_t size, { return iommu_map_page(NULL, &vio_iommu_table, virt_to_page(vaddr), (unsigned long)vaddr % PAGE_SIZE, size, - DMA_32BIT_MASK, direction, NULL); + DMA_BIT_MASK(32), direction, NULL); } void iseries_hv_unmap(dma_addr_t dma_handle, size_t size, diff --git a/arch/powerpc/platforms/ps3/system-bus.c b/arch/powerpc/platforms/ps3/system-bus.c index a705fffbb49..9a73d023863 100644 --- a/arch/powerpc/platforms/ps3/system-bus.c +++ b/arch/powerpc/platforms/ps3/system-bus.c @@ -689,7 +689,7 @@ static void ps3_ioc0_unmap_sg(struct device *_dev, struct scatterlist *sg, static int ps3_dma_supported(struct device *_dev, u64 mask) { - return mask >= DMA_32BIT_MASK; + return mask >= DMA_BIT_MASK(32); } static struct dma_mapping_ops ps3_sb_dma_ops = { diff --git a/arch/powerpc/sysdev/fsl_lbc.c b/arch/powerpc/sysdev/fsl_lbc.c index 0494ee55920..dceb8d1a843 100644 --- a/arch/powerpc/sysdev/fsl_lbc.c +++ b/arch/powerpc/sysdev/fsl_lbc.c @@ -150,7 +150,7 @@ int fsl_upm_run_pattern(struct fsl_upm *upm, void __iomem *io_base, u32 mar) spin_lock_irqsave(&fsl_lbc_lock, flags); - out_be32(&fsl_lbc_regs->mar, mar << (32 - upm->width)); + out_be32(&fsl_lbc_regs->mar, mar); switch (upm->width) { case 8: diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index 532e205303a..21b95670159 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -1170,6 +1170,12 @@ struct mpic * __init mpic_alloc(struct device_node *node, mb(); } + /* CoreInt */ + if (flags & MPIC_ENABLE_COREINT) + mpic_write(mpic->gregs, MPIC_INFO(GREG_GLOBAL_CONF_0), + mpic_read(mpic->gregs, MPIC_INFO(GREG_GLOBAL_CONF_0)) + | MPIC_GREG_GCONF_COREINT); + if (flags & MPIC_ENABLE_MCK) mpic_write(mpic->gregs, MPIC_INFO(GREG_GLOBAL_CONF_0), mpic_read(mpic->gregs, MPIC_INFO(GREG_GLOBAL_CONF_0)) @@ -1525,6 +1531,34 @@ unsigned int mpic_get_irq(void) return mpic_get_one_irq(mpic); } +unsigned int mpic_get_coreint_irq(void) +{ +#ifdef CONFIG_BOOKE + struct mpic *mpic = mpic_primary; + u32 src; + + BUG_ON(mpic == NULL); + + src = mfspr(SPRN_EPR); + + if (unlikely(src == mpic->spurious_vec)) { + if (mpic->flags & MPIC_SPV_EOI) + mpic_eoi(mpic); + return NO_IRQ; + } + if (unlikely(mpic->protected && test_bit(src, mpic->protected))) { + if (printk_ratelimit()) + printk(KERN_WARNING "%s: Got protected source %d !\n", + mpic->name, (int)src); + return NO_IRQ; + } + + return irq_linear_revmap(mpic->irqhost, src); +#else + return NO_IRQ; +#endif +} + unsigned int mpic_get_mcirq(void) { struct mpic *mpic = mpic_primary; diff --git a/arch/sparc/include/asm/unistd.h b/arch/sparc/include/asm/unistd.h index 031f038b19f..b8eb71ef316 100644 --- a/arch/sparc/include/asm/unistd.h +++ b/arch/sparc/include/asm/unistd.h @@ -392,8 +392,10 @@ #define __NR_pipe2 321 #define __NR_inotify_init1 322 #define __NR_accept4 323 +#define __NR_preadv 324 +#define __NR_pwritev 325 -#define NR_SYSCALLS 324 +#define NR_SYSCALLS 326 #ifdef __32bit_syscall_numbers__ /* Sparc 32-bit only has the "setresuid32", "getresuid32" variants, diff --git a/arch/sparc/kernel/of_device_64.c b/arch/sparc/kernel/of_device_64.c index b4a12c9aa5f..27381f1baff 100644 --- a/arch/sparc/kernel/of_device_64.c +++ b/arch/sparc/kernel/of_device_64.c @@ -99,8 +99,7 @@ static inline u64 of_read_addr(const u32 *cell, int size) return r; } -static void __init get_cells(struct device_node *dp, - int *addrc, int *sizec) +static void get_cells(struct device_node *dp, int *addrc, int *sizec) { if (addrc) *addrc = of_n_addr_cells(dp); diff --git a/arch/sparc/kernel/pci_fire.c b/arch/sparc/kernel/pci_fire.c index 9462b68f489..d53f45bc7dd 100644 --- a/arch/sparc/kernel/pci_fire.c +++ b/arch/sparc/kernel/pci_fire.c @@ -409,8 +409,8 @@ static void pci_fire_hw_init(struct pci_pbm_info *pbm) upa_writeq(~(u64)0, pbm->pbm_regs + FIRE_PEC_IENAB); } -static int __init pci_fire_pbm_init(struct pci_pbm_info *pbm, - struct of_device *op, u32 portid) +static int __devinit pci_fire_pbm_init(struct pci_pbm_info *pbm, + struct of_device *op, u32 portid) { const struct linux_prom64_registers *regs; struct device_node *dp = op->node; diff --git a/arch/sparc/kernel/pci_psycho.c b/arch/sparc/kernel/pci_psycho.c index 3b34344082e..142b9d6984a 100644 --- a/arch/sparc/kernel/pci_psycho.c +++ b/arch/sparc/kernel/pci_psycho.c @@ -365,8 +365,8 @@ static void pbm_config_busmastering(struct pci_pbm_info *pbm) pci_config_write8(addr, 64); } -static void __init psycho_scan_bus(struct pci_pbm_info *pbm, - struct device *parent) +static void __devinit psycho_scan_bus(struct pci_pbm_info *pbm, + struct device *parent) { pbm_config_busmastering(pbm); pbm->is_66mhz_capable = 0; @@ -482,8 +482,8 @@ static void psycho_pbm_strbuf_init(struct pci_pbm_info *pbm, #define PSYCHO_MEMSPACE_B 0x180000000UL #define PSYCHO_MEMSPACE_SIZE 0x07fffffffUL -static void __init psycho_pbm_init(struct pci_pbm_info *pbm, - struct of_device *op, int is_pbm_a) +static void __devinit psycho_pbm_init(struct pci_pbm_info *pbm, + struct of_device *op, int is_pbm_a) { psycho_pbm_init_common(pbm, op, "PSYCHO", PBM_CHIP_TYPE_PSYCHO); psycho_pbm_strbuf_init(pbm, is_pbm_a); diff --git a/arch/sparc/kernel/pci_sabre.c b/arch/sparc/kernel/pci_sabre.c index 713257b6963..ba6fbeba3e2 100644 --- a/arch/sparc/kernel/pci_sabre.c +++ b/arch/sparc/kernel/pci_sabre.c @@ -402,8 +402,8 @@ static void apb_init(struct pci_bus *sabre_bus) } } -static void __init sabre_scan_bus(struct pci_pbm_info *pbm, - struct device *parent) +static void __devinit sabre_scan_bus(struct pci_pbm_info *pbm, + struct device *parent) { static int once; @@ -442,8 +442,8 @@ static void __init sabre_scan_bus(struct pci_pbm_info *pbm, sabre_register_error_handlers(pbm); } -static void __init sabre_pbm_init(struct pci_pbm_info *pbm, - struct of_device *op) +static void __devinit sabre_pbm_init(struct pci_pbm_info *pbm, + struct of_device *op) { psycho_pbm_init_common(pbm, op, "SABRE", PBM_CHIP_TYPE_SABRE); pbm->pci_afsr = pbm->controller_regs + SABRE_PIOAFSR; diff --git a/arch/sparc/kernel/pci_sun4v.c b/arch/sparc/kernel/pci_sun4v.c index 0ef0ab3d476..5db5ebed35d 100644 --- a/arch/sparc/kernel/pci_sun4v.c +++ b/arch/sparc/kernel/pci_sun4v.c @@ -545,8 +545,8 @@ static const struct dma_ops sun4v_dma_ops = { .sync_sg_for_cpu = dma_4v_sync_sg_for_cpu, }; -static void __init pci_sun4v_scan_bus(struct pci_pbm_info *pbm, - struct device *parent) +static void __devinit pci_sun4v_scan_bus(struct pci_pbm_info *pbm, + struct device *parent) { struct property *prop; struct device_node *dp; @@ -559,8 +559,8 @@ static void __init pci_sun4v_scan_bus(struct pci_pbm_info *pbm, /* XXX register error interrupt handlers XXX */ } -static unsigned long __init probe_existing_entries(struct pci_pbm_info *pbm, - struct iommu *iommu) +static unsigned long __devinit probe_existing_entries(struct pci_pbm_info *pbm, + struct iommu *iommu) { struct iommu_arena *arena = &iommu->arena; unsigned long i, cnt = 0; @@ -587,7 +587,7 @@ static unsigned long __init probe_existing_entries(struct pci_pbm_info *pbm, return cnt; } -static int __init pci_sun4v_iommu_init(struct pci_pbm_info *pbm) +static int __devinit pci_sun4v_iommu_init(struct pci_pbm_info *pbm) { static const u32 vdma_default[] = { 0x80000000, 0x80000000 }; struct iommu *iommu = pbm->iommu; @@ -889,8 +889,8 @@ static void pci_sun4v_msi_init(struct pci_pbm_info *pbm) } #endif /* !(CONFIG_PCI_MSI) */ -static int __init pci_sun4v_pbm_init(struct pci_pbm_info *pbm, - struct of_device *op, u32 devhandle) +static int __devinit pci_sun4v_pbm_init(struct pci_pbm_info *pbm, + struct of_device *op, u32 devhandle) { struct device_node *dp = op->node; int err; diff --git a/arch/sparc/kernel/power.c b/arch/sparc/kernel/power.c index ae88f06a7ec..e2a045c235a 100644 --- a/arch/sparc/kernel/power.c +++ b/arch/sparc/kernel/power.c @@ -23,7 +23,7 @@ static irqreturn_t power_handler(int irq, void *dev_id) return IRQ_HANDLED; } -static int __init has_button_interrupt(unsigned int irq, struct device_node *dp) +static int __devinit has_button_interrupt(unsigned int irq, struct device_node *dp) { if (irq == 0xffffffff) return 0; diff --git a/arch/sparc/kernel/systbls_32.S b/arch/sparc/kernel/systbls_32.S index dccc95df0c7..00ec3b15f38 100644 --- a/arch/sparc/kernel/systbls_32.S +++ b/arch/sparc/kernel/systbls_32.S @@ -81,4 +81,4 @@ sys_call_table: /*305*/ .long sys_set_mempolicy, sys_kexec_load, sys_move_pages, sys_getcpu, sys_epoll_pwait /*310*/ .long sys_utimensat, sys_signalfd, sys_timerfd_create, sys_eventfd, sys_fallocate /*315*/ .long sys_timerfd_settime, sys_timerfd_gettime, sys_signalfd4, sys_eventfd2, sys_epoll_create1 -/*320*/ .long sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4 +/*320*/ .long sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv, sys_pwritev diff --git a/arch/sparc/kernel/systbls_64.S b/arch/sparc/kernel/systbls_64.S index a8000b1cda7..82b5bf85b9d 100644 --- a/arch/sparc/kernel/systbls_64.S +++ b/arch/sparc/kernel/systbls_64.S @@ -82,7 +82,7 @@ sys_call_table32: .word compat_sys_set_mempolicy, compat_sys_kexec_load, compat_sys_move_pages, sys_getcpu, compat_sys_epoll_pwait /*310*/ .word compat_sys_utimensat, compat_sys_signalfd, sys_timerfd_create, sys_eventfd, compat_sys_fallocate .word compat_sys_timerfd_settime, compat_sys_timerfd_gettime, compat_sys_signalfd4, sys_eventfd2, sys_epoll_create1 -/*320*/ .word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4 +/*320*/ .word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, compat_sys_preadv, compat_sys_pwritev #endif /* CONFIG_COMPAT */ @@ -156,4 +156,4 @@ sys_call_table: .word sys_set_mempolicy, sys_kexec_load, sys_move_pages, sys_getcpu, sys_epoll_pwait /*310*/ .word sys_utimensat, sys_signalfd, sys_timerfd_create, sys_eventfd, sys_fallocate .word sys_timerfd_settime, sys_timerfd_gettime, sys_signalfd4, sys_eventfd2, sys_epoll_create1 -/*320*/ .word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4 +/*320*/ .word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv, sys_pwritev diff --git a/arch/sparc/mm/init_64.c b/arch/sparc/mm/init_64.c index 2c8dfeb7ab0..f26a352c08a 100644 --- a/arch/sparc/mm/init_64.c +++ b/arch/sparc/mm/init_64.c @@ -70,8 +70,8 @@ extern struct tsb swapper_4m_tsb[KERNEL_TSB4M_NENTRIES]; #define MAX_BANKS 32 -static struct linux_prom64_registers pavail[MAX_BANKS] __initdata; -static int pavail_ents __initdata; +static struct linux_prom64_registers pavail[MAX_BANKS] __devinitdata; +static int pavail_ents __devinitdata; static int cmp_p64(const void *a, const void *b) { @@ -968,7 +968,7 @@ int of_node_to_nid(struct device_node *dp) return nid; } -static void add_node_ranges(void) +static void __init add_node_ranges(void) { int i; @@ -1841,7 +1841,7 @@ void __init paging_init(void) printk("Booting Linux...\n"); } -int __init page_in_phys_avail(unsigned long paddr) +int __devinit page_in_phys_avail(unsigned long paddr) { int i; diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 5b2196ab816..bc25b9f5e4c 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -252,16 +252,13 @@ config SMP config X86_X2APIC bool "Support x2apic" - depends on X86_LOCAL_APIC && X86_64 + depends on X86_LOCAL_APIC && X86_64 && INTR_REMAP ---help--- This enables x2apic support on CPUs that have this feature. This allows 32-bit apic IDs (so it can support very large systems), and accesses the local apic via MSRs not via mmio. - ( On certain CPU models you may need to enable INTR_REMAP too, - to get functional x2apic mode. ) - If you don't know what to do here, say N. config SPARSE_IRQ @@ -1881,7 +1878,6 @@ config DMAR_FLOPPY_WA config INTR_REMAP bool "Support for Interrupt Remapping (EXPERIMENTAL)" depends on X86_64 && X86_IO_APIC && PCI_MSI && ACPI && EXPERIMENTAL - select X86_X2APIC ---help--- Supports Interrupt remapping for IO-APIC and MSI devices. To use x2apic mode in the CPU's which support x2APIC enhancements or diff --git a/arch/x86/boot/video-vga.c b/arch/x86/boot/video-vga.c index 95d86ce0421..9e0587a3776 100644 --- a/arch/x86/boot/video-vga.c +++ b/arch/x86/boot/video-vga.c @@ -129,22 +129,18 @@ u16 vga_crtc(void) return (inb(0x3cc) & 1) ? 0x3d4 : 0x3b4; } -static void vga_set_480_scanlines(int lines) +static void vga_set_480_scanlines(void) { u16 crtc; /* CRTC base address */ u8 csel; /* CRTC miscellaneous output register */ - u8 ovfw; /* CRTC overflow register */ - int end = lines-1; crtc = vga_crtc(); - ovfw = 0x3c | ((end >> (8-1)) & 0x02) | ((end >> (9-6)) & 0x40); - out_idx(0x0c, crtc, 0x11); /* Vertical sync end, unlock CR0-7 */ out_idx(0x0b, crtc, 0x06); /* Vertical total */ - out_idx(ovfw, crtc, 0x07); /* Vertical overflow */ + out_idx(0x3e, crtc, 0x07); /* Vertical overflow */ out_idx(0xea, crtc, 0x10); /* Vertical sync start */ - out_idx(end, crtc, 0x12); /* Vertical display end */ + out_idx(0xdf, crtc, 0x12); /* Vertical display end */ out_idx(0xe7, crtc, 0x15); /* Vertical blank start */ out_idx(0x04, crtc, 0x16); /* Vertical blank end */ csel = inb(0x3cc); @@ -153,21 +149,38 @@ static void vga_set_480_scanlines(int lines) outb(csel, 0x3c2); } +static void vga_set_vertical_end(int lines) +{ + u16 crtc; /* CRTC base address */ + u8 ovfw; /* CRTC overflow register */ + int end = lines-1; + + crtc = vga_crtc(); + + ovfw = 0x3c | ((end >> (8-1)) & 0x02) | ((end >> (9-6)) & 0x40); + + out_idx(ovfw, crtc, 0x07); /* Vertical overflow */ + out_idx(end, crtc, 0x12); /* Vertical display end */ +} + static void vga_set_80x30(void) { - vga_set_480_scanlines(30*16); + vga_set_480_scanlines(); + vga_set_vertical_end(30*16); } static void vga_set_80x34(void) { + vga_set_480_scanlines(); vga_set_14font(); - vga_set_480_scanlines(34*14); + vga_set_vertical_end(34*14); } static void vga_set_80x60(void) { + vga_set_480_scanlines(); vga_set_8font(); - vga_set_480_scanlines(60*8); + vga_set_vertical_end(60*8); } static int vga_set_mode(struct mode_info *mode) diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h index df8a300dfe6..42f2f837742 100644 --- a/arch/x86/include/asm/apic.h +++ b/arch/x86/include/asm/apic.h @@ -107,6 +107,9 @@ extern u32 native_safe_apic_wait_icr_idle(void); extern void native_apic_icr_write(u32 low, u32 id); extern u64 native_apic_icr_read(void); +#define EIM_8BIT_APIC_ID 0 +#define EIM_32BIT_APIC_ID 1 + #ifdef CONFIG_X86_X2APIC /* * Make previous memory operations globally visible before diff --git a/arch/x86/include/asm/cpu_debug.h b/arch/x86/include/asm/cpu_debug.h index 222802029fa..222802029fa 100755..100644 --- a/arch/x86/include/asm/cpu_debug.h +++ b/arch/x86/include/asm/cpu_debug.h diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h index 0beba0d1468..bb83b1c397a 100644 --- a/arch/x86/include/asm/cpufeature.h +++ b/arch/x86/include/asm/cpufeature.h @@ -154,6 +154,7 @@ * CPUID levels like 0x6, 0xA etc */ #define X86_FEATURE_IDA (7*32+ 0) /* Intel Dynamic Acceleration */ +#define X86_FEATURE_ARAT (7*32+ 1) /* Always Running APIC Timer */ /* Virtualization flags: Linux defined */ #define X86_FEATURE_TPR_SHADOW (8*32+ 0) /* Intel TPR Shadow */ diff --git a/arch/x86/include/asm/dma-mapping.h b/arch/x86/include/asm/dma-mapping.h index cea7b74963e..f82fdc412c6 100644 --- a/arch/x86/include/asm/dma-mapping.h +++ b/arch/x86/include/asm/dma-mapping.h @@ -238,7 +238,7 @@ static inline unsigned long dma_alloc_coherent_mask(struct device *dev, dma_mask = dev->coherent_dma_mask; if (!dma_mask) - dma_mask = (gfp & GFP_DMA) ? DMA_24BIT_MASK : DMA_32BIT_MASK; + dma_mask = (gfp & GFP_DMA) ? DMA_BIT_MASK(24) : DMA_BIT_MASK(32); return dma_mask; } @@ -247,10 +247,10 @@ static inline gfp_t dma_alloc_coherent_gfp_flags(struct device *dev, gfp_t gfp) { unsigned long dma_mask = dma_alloc_coherent_mask(dev, gfp); - if (dma_mask <= DMA_24BIT_MASK) + if (dma_mask <= DMA_BIT_MASK(24)) gfp |= GFP_DMA; #ifdef CONFIG_X86_64 - if (dma_mask <= DMA_32BIT_MASK && !(gfp & GFP_DMA)) + if (dma_mask <= DMA_BIT_MASK(32) && !(gfp & GFP_DMA)) gfp |= GFP_DMA32; #endif return gfp; diff --git a/arch/x86/include/asm/fixmap.h b/arch/x86/include/asm/fixmap.h index 81937a5dc77..2d81af3974a 100644 --- a/arch/x86/include/asm/fixmap.h +++ b/arch/x86/include/asm/fixmap.h @@ -151,11 +151,11 @@ extern pte_t *pkmap_page_table; void __native_set_fixmap(enum fixed_addresses idx, pte_t pte); void native_set_fixmap(enum fixed_addresses idx, - unsigned long phys, pgprot_t flags); + phys_addr_t phys, pgprot_t flags); #ifndef CONFIG_PARAVIRT static inline void __set_fixmap(enum fixed_addresses idx, - unsigned long phys, pgprot_t flags) + phys_addr_t phys, pgprot_t flags) { native_set_fixmap(idx, phys, flags); } diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h index 373cc2bbcad..9d826e43601 100644 --- a/arch/x86/include/asm/io_apic.h +++ b/arch/x86/include/asm/io_apic.h @@ -162,10 +162,13 @@ extern int (*ioapic_renumber_irq)(int ioapic, int irq); extern void ioapic_init_mappings(void); #ifdef CONFIG_X86_64 -extern int save_IO_APIC_setup(void); -extern void mask_IO_APIC_setup(void); -extern void restore_IO_APIC_setup(void); -extern void reinit_intr_remapped_IO_APIC(int); +extern struct IO_APIC_route_entry **alloc_ioapic_entries(void); +extern void free_ioapic_entries(struct IO_APIC_route_entry **ioapic_entries); +extern int save_IO_APIC_setup(struct IO_APIC_route_entry **ioapic_entries); +extern void mask_IO_APIC_setup(struct IO_APIC_route_entry **ioapic_entries); +extern int restore_IO_APIC_setup(struct IO_APIC_route_entry **ioapic_entries); +extern void reinit_intr_remapped_IO_APIC(int intr_remapping, + struct IO_APIC_route_entry **ioapic_entries); #endif extern void probe_nr_irqs_gsi(void); diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h index 7727aa8b7dd..378e3691c08 100644 --- a/arch/x86/include/asm/paravirt.h +++ b/arch/x86/include/asm/paravirt.h @@ -347,7 +347,7 @@ struct pv_mmu_ops { /* Sometimes the physical address is a pfn, and sometimes its an mfn. We can tell which is which from the index. */ void (*set_fixmap)(unsigned /* enum fixed_addresses */ idx, - unsigned long phys, pgprot_t flags); + phys_addr_t phys, pgprot_t flags); }; struct raw_spinlock; @@ -1432,7 +1432,7 @@ static inline void arch_leave_lazy_mmu_mode(void) void arch_flush_lazy_mmu_mode(void); static inline void __set_fixmap(unsigned /* enum fixed_addresses */ idx, - unsigned long phys, pgprot_t flags) + phys_addr_t phys, pgprot_t flags) { pv_mmu_ops.set_fixmap(idx, phys, flags); } diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 85eb8e10081..f2870920f24 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -431,6 +431,12 @@ static void __cpuinit setup_APIC_timer(void) { struct clock_event_device *levt = &__get_cpu_var(lapic_events); + if (cpu_has(¤t_cpu_data, X86_FEATURE_ARAT)) { + lapic_clockevent.features &= ~CLOCK_EVT_FEAT_C3STOP; + /* Make LAPIC timer preferrable over percpu HPET */ + lapic_clockevent.rating = 150; + } + memcpy(levt, &lapic_clockevent, sizeof(*levt)); levt->cpumask = cpumask_of(smp_processor_id()); @@ -1304,6 +1310,7 @@ void __init enable_IR_x2apic(void) #ifdef CONFIG_INTR_REMAP int ret; unsigned long flags; + struct IO_APIC_route_entry **ioapic_entries = NULL; if (!cpu_has_x2apic) return; @@ -1334,17 +1341,23 @@ void __init enable_IR_x2apic(void) return; } - ret = save_IO_APIC_setup(); + ioapic_entries = alloc_ioapic_entries(); + if (!ioapic_entries) { + pr_info("Allocate ioapic_entries failed: %d\n", ret); + goto end; + } + + ret = save_IO_APIC_setup(ioapic_entries); if (ret) { pr_info("Saving IO-APIC state failed: %d\n", ret); goto end; } local_irq_save(flags); - mask_IO_APIC_setup(); + mask_IO_APIC_setup(ioapic_entries); mask_8259A(); - ret = enable_intr_remapping(1); + ret = enable_intr_remapping(EIM_32BIT_APIC_ID); if (ret && x2apic_preenabled) { local_irq_restore(flags); @@ -1364,9 +1377,9 @@ end_restore: /* * IR enabling failed */ - restore_IO_APIC_setup(); + restore_IO_APIC_setup(ioapic_entries); else - reinit_intr_remapped_IO_APIC(x2apic_preenabled); + reinit_intr_remapped_IO_APIC(x2apic_preenabled, ioapic_entries); unmask_8259A(); local_irq_restore(flags); @@ -1379,6 +1392,8 @@ end: pr_info("Enabled Interrupt-remapping\n"); } else pr_err("Failed to enable Interrupt-remapping and x2apic\n"); + if (ioapic_entries) + free_ioapic_entries(ioapic_entries); #else if (!cpu_has_x2apic) return; @@ -1954,6 +1969,10 @@ static int lapic_suspend(struct sys_device *dev, pm_message_t state) local_irq_save(flags); disable_local_APIC(); +#ifdef CONFIG_INTR_REMAP + if (intr_remapping_enabled) + disable_intr_remapping(); +#endif local_irq_restore(flags); return 0; } @@ -1964,15 +1983,41 @@ static int lapic_resume(struct sys_device *dev) unsigned long flags; int maxlvt; +#ifdef CONFIG_INTR_REMAP + int ret; + struct IO_APIC_route_entry **ioapic_entries = NULL; + if (!apic_pm_state.active) return 0; - maxlvt = lapic_get_maxlvt(); - local_irq_save(flags); + if (x2apic) { + ioapic_entries = alloc_ioapic_entries(); + if (!ioapic_entries) { + WARN(1, "Alloc ioapic_entries in lapic resume failed."); + return -ENOMEM; + } + + ret = save_IO_APIC_setup(ioapic_entries); + if (ret) { + WARN(1, "Saving IO-APIC state failed: %d\n", ret); + free_ioapic_entries(ioapic_entries); + return ret; + } + + mask_IO_APIC_setup(ioapic_entries); + mask_8259A(); + enable_x2apic(); + } +#else + if (!apic_pm_state.active) + return 0; + local_irq_save(flags); if (x2apic) enable_x2apic(); +#endif + else { /* * Make sure the APICBASE points to the right address @@ -1986,6 +2031,7 @@ static int lapic_resume(struct sys_device *dev) wrmsr(MSR_IA32_APICBASE, l, h); } + maxlvt = lapic_get_maxlvt(); apic_write(APIC_LVTERR, ERROR_APIC_VECTOR | APIC_LVT_MASKED); apic_write(APIC_ID, apic_pm_state.apic_id); apic_write(APIC_DFR, apic_pm_state.apic_dfr); @@ -2009,8 +2055,20 @@ static int lapic_resume(struct sys_device *dev) apic_write(APIC_ESR, 0); apic_read(APIC_ESR); +#ifdef CONFIG_INTR_REMAP + if (intr_remapping_enabled) + reenable_intr_remapping(EIM_32BIT_APIC_ID); + + if (x2apic) { + unmask_8259A(); + restore_IO_APIC_setup(ioapic_entries); + free_ioapic_entries(ioapic_entries); + } +#endif + local_irq_restore(flags); + return 0; } @@ -2048,7 +2106,9 @@ static int __init init_lapic_sysfs(void) error = sysdev_register(&device_lapic); return error; } -device_initcall(init_lapic_sysfs); + +/* local apic needs to resume before other devices access its registers. */ +core_initcall(init_lapic_sysfs); #else /* CONFIG_PM */ diff --git a/arch/x86/kernel/apic/apic_flat_64.c b/arch/x86/kernel/apic/apic_flat_64.c index 0014714ea97..306e5e88fb6 100644 --- a/arch/x86/kernel/apic/apic_flat_64.c +++ b/arch/x86/kernel/apic/apic_flat_64.c @@ -212,7 +212,7 @@ struct apic apic_flat = { .trampoline_phys_high = DEFAULT_TRAMPOLINE_PHYS_HIGH, .wait_for_init_deassert = NULL, .smp_callin_clear_local_apic = NULL, - .inquire_remote_apic = NULL, + .inquire_remote_apic = default_inquire_remote_apic, .read = native_apic_mem_read, .write = native_apic_mem_write, @@ -362,7 +362,7 @@ struct apic apic_physflat = { .trampoline_phys_high = DEFAULT_TRAMPOLINE_PHYS_HIGH, .wait_for_init_deassert = NULL, .smp_callin_clear_local_apic = NULL, - .inquire_remote_apic = NULL, + .inquire_remote_apic = default_inquire_remote_apic, .read = native_apic_mem_read, .write = native_apic_mem_write, diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 1bb5c6cee3e..767fe7e46d6 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -851,63 +851,74 @@ __setup("pirq=", ioapic_pirq_setup); #endif /* CONFIG_X86_32 */ #ifdef CONFIG_INTR_REMAP -/* I/O APIC RTE contents at the OS boot up */ -static struct IO_APIC_route_entry *early_ioapic_entries[MAX_IO_APICS]; +struct IO_APIC_route_entry **alloc_ioapic_entries(void) +{ + int apic; + struct IO_APIC_route_entry **ioapic_entries; + + ioapic_entries = kzalloc(sizeof(*ioapic_entries) * nr_ioapics, + GFP_ATOMIC); + if (!ioapic_entries) + return 0; + + for (apic = 0; apic < nr_ioapics; apic++) { + ioapic_entries[apic] = + kzalloc(sizeof(struct IO_APIC_route_entry) * + nr_ioapic_registers[apic], GFP_ATOMIC); + if (!ioapic_entries[apic]) + goto nomem; + } + + return ioapic_entries; + +nomem: + while (--apic >= 0) + kfree(ioapic_entries[apic]); + kfree(ioapic_entries); + + return 0; +} /* * Saves all the IO-APIC RTE's */ -int save_IO_APIC_setup(void) +int save_IO_APIC_setup(struct IO_APIC_route_entry **ioapic_entries) { - union IO_APIC_reg_01 reg_01; - unsigned long flags; int apic, pin; - /* - * The number of IO-APIC IRQ registers (== #pins): - */ - for (apic = 0; apic < nr_ioapics; apic++) { - spin_lock_irqsave(&ioapic_lock, flags); - reg_01.raw = io_apic_read(apic, 1); - spin_unlock_irqrestore(&ioapic_lock, flags); - nr_ioapic_registers[apic] = reg_01.bits.entries+1; - } + if (!ioapic_entries) + return -ENOMEM; for (apic = 0; apic < nr_ioapics; apic++) { - early_ioapic_entries[apic] = - kzalloc(sizeof(struct IO_APIC_route_entry) * - nr_ioapic_registers[apic], GFP_KERNEL); - if (!early_ioapic_entries[apic]) - goto nomem; - } + if (!ioapic_entries[apic]) + return -ENOMEM; - for (apic = 0; apic < nr_ioapics; apic++) for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) - early_ioapic_entries[apic][pin] = + ioapic_entries[apic][pin] = ioapic_read_entry(apic, pin); + } return 0; - -nomem: - while (apic >= 0) - kfree(early_ioapic_entries[apic--]); - memset(early_ioapic_entries, 0, - ARRAY_SIZE(early_ioapic_entries)); - - return -ENOMEM; } -void mask_IO_APIC_setup(void) +/* + * Mask all IO APIC entries. + */ +void mask_IO_APIC_setup(struct IO_APIC_route_entry **ioapic_entries) { int apic, pin; + if (!ioapic_entries) + return; + for (apic = 0; apic < nr_ioapics; apic++) { - if (!early_ioapic_entries[apic]) + if (!ioapic_entries[apic]) break; + for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) { struct IO_APIC_route_entry entry; - entry = early_ioapic_entries[apic][pin]; + entry = ioapic_entries[apic][pin]; if (!entry.mask) { entry.mask = 1; ioapic_write_entry(apic, pin, entry); @@ -916,22 +927,30 @@ void mask_IO_APIC_setup(void) } } -void restore_IO_APIC_setup(void) +/* + * Restore IO APIC entries which was saved in ioapic_entries. + */ +int restore_IO_APIC_setup(struct IO_APIC_route_entry **ioapic_entries) { int apic, pin; + if (!ioapic_entries) + return -ENOMEM; + for (apic = 0; apic < nr_ioapics; apic++) { - if (!early_ioapic_entries[apic]) - break; + if (!ioapic_entries[apic]) + return -ENOMEM; + for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) ioapic_write_entry(apic, pin, - early_ioapic_entries[apic][pin]); - kfree(early_ioapic_entries[apic]); - early_ioapic_entries[apic] = NULL; + ioapic_entries[apic][pin]); } + return 0; } -void reinit_intr_remapped_IO_APIC(int intr_remapping) +void reinit_intr_remapped_IO_APIC(int intr_remapping, + struct IO_APIC_route_entry **ioapic_entries) + { /* * for now plain restore of previous settings. @@ -940,7 +959,17 @@ void reinit_intr_remapped_IO_APIC(int intr_remapping) * table entries. for now, do a plain restore, and wait for * the setup_IO_APIC_irqs() to do proper initialization. */ - restore_IO_APIC_setup(); + restore_IO_APIC_setup(ioapic_entries); +} + +void free_ioapic_entries(struct IO_APIC_route_entry **ioapic_entries) +{ + int apic; + + for (apic = 0; apic < nr_ioapics; apic++) + kfree(ioapic_entries[apic]); + + kfree(ioapic_entries); } #endif @@ -2495,7 +2524,7 @@ static void irq_complete_move(struct irq_desc **descp) static inline void irq_complete_move(struct irq_desc **descp) {} #endif -#ifdef CONFIG_INTR_REMAP +#ifdef CONFIG_X86_X2APIC static void __eoi_ioapic_irq(unsigned int irq, struct irq_cfg *cfg) { int apic, pin; @@ -2540,7 +2569,6 @@ static void ack_x2apic_edge(unsigned int irq) { ack_x2APIC_irq(); } - #endif static void ack_apic_edge(unsigned int irq) @@ -2651,6 +2679,26 @@ static void ack_apic_level(unsigned int irq) #endif } +#ifdef CONFIG_INTR_REMAP +static void ir_ack_apic_edge(unsigned int irq) +{ +#ifdef CONFIG_X86_X2APIC + if (x2apic_enabled()) + return ack_x2apic_edge(irq); +#endif + return ack_apic_edge(irq); +} + +static void ir_ack_apic_level(unsigned int irq) +{ +#ifdef CONFIG_X86_X2APIC + if (x2apic_enabled()) + return ack_x2apic_level(irq); +#endif + return ack_apic_level(irq); +} +#endif /* CONFIG_INTR_REMAP */ + static struct irq_chip ioapic_chip __read_mostly = { .name = "IO-APIC", .startup = startup_ioapic_irq, @@ -2670,8 +2718,8 @@ static struct irq_chip ir_ioapic_chip __read_mostly = { .mask = mask_IO_APIC_irq, .unmask = unmask_IO_APIC_irq, #ifdef CONFIG_INTR_REMAP - .ack = ack_x2apic_edge, - .eoi = ack_x2apic_level, + .ack = ir_ack_apic_edge, + .eoi = ir_ack_apic_level, #ifdef CONFIG_SMP .set_affinity = set_ir_ioapic_affinity_irq, #endif @@ -3397,7 +3445,7 @@ static struct irq_chip msi_ir_chip = { .unmask = unmask_msi_irq, .mask = mask_msi_irq, #ifdef CONFIG_INTR_REMAP - .ack = ack_x2apic_edge, + .ack = ir_ack_apic_edge, #ifdef CONFIG_SMP .set_affinity = ir_set_msi_irq_affinity, #endif diff --git a/arch/x86/kernel/cpu/addon_cpuid_features.c b/arch/x86/kernel/cpu/addon_cpuid_features.c index 8220ae69849..c965e521271 100644 --- a/arch/x86/kernel/cpu/addon_cpuid_features.c +++ b/arch/x86/kernel/cpu/addon_cpuid_features.c @@ -31,6 +31,7 @@ void __cpuinit init_scattered_cpuid_features(struct cpuinfo_x86 *c) static const struct cpuid_bit __cpuinitconst cpuid_bits[] = { { X86_FEATURE_IDA, CR_EAX, 1, 0x00000006 }, + { X86_FEATURE_ARAT, CR_EAX, 2, 0x00000006 }, { 0, 0, 0, 0 } }; diff --git a/arch/x86/kernel/cpu/cpu_debug.c b/arch/x86/kernel/cpu/cpu_debug.c index 46e29ab96c6..46e29ab96c6 100755..100644 --- a/arch/x86/kernel/cpu/cpu_debug.c +++ b/arch/x86/kernel/cpu/cpu_debug.c diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c index 19f6b9d27e8..9d3af380c6b 100644 --- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c +++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c @@ -68,6 +68,7 @@ struct acpi_cpufreq_data { unsigned int max_freq; unsigned int resume; unsigned int cpu_feature; + u64 saved_aperf, saved_mperf; }; static DEFINE_PER_CPU(struct acpi_cpufreq_data *, drv_data); @@ -241,26 +242,23 @@ static u32 get_cur_val(const struct cpumask *mask) return cmd.val; } -struct perf_cur { +struct perf_pair { union { struct { u32 lo; u32 hi; } split; u64 whole; - } aperf_cur, mperf_cur; + } aperf, mperf; }; static long read_measured_perf_ctrs(void *_cur) { - struct perf_cur *cur = _cur; + struct perf_pair *cur = _cur; - rdmsr(MSR_IA32_APERF, cur->aperf_cur.split.lo, cur->aperf_cur.split.hi); - rdmsr(MSR_IA32_MPERF, cur->mperf_cur.split.lo, cur->mperf_cur.split.hi); - - wrmsr(MSR_IA32_APERF, 0, 0); - wrmsr(MSR_IA32_MPERF, 0, 0); + rdmsr(MSR_IA32_APERF, cur->aperf.split.lo, cur->aperf.split.hi); + rdmsr(MSR_IA32_MPERF, cur->mperf.split.lo, cur->mperf.split.hi); return 0; } @@ -281,52 +279,57 @@ static long read_measured_perf_ctrs(void *_cur) static unsigned int get_measured_perf(struct cpufreq_policy *policy, unsigned int cpu) { - struct perf_cur cur; + struct perf_pair readin, cur; unsigned int perf_percent; unsigned int retval; - if (!work_on_cpu(cpu, read_measured_perf_ctrs, &cur)) + if (!work_on_cpu(cpu, read_measured_perf_ctrs, &readin)) return 0; + cur.aperf.whole = readin.aperf.whole - + per_cpu(drv_data, cpu)->saved_aperf; + cur.mperf.whole = readin.mperf.whole - + per_cpu(drv_data, cpu)->saved_mperf; + per_cpu(drv_data, cpu)->saved_aperf = readin.aperf.whole; + per_cpu(drv_data, cpu)->saved_mperf = readin.mperf.whole; + #ifdef __i386__ /* * We dont want to do 64 bit divide with 32 bit kernel * Get an approximate value. Return failure in case we cannot get * an approximate value. */ - if (unlikely(cur.aperf_cur.split.hi || cur.mperf_cur.split.hi)) { + if (unlikely(cur.aperf.split.hi || cur.mperf.split.hi)) { int shift_count; u32 h; - h = max_t(u32, cur.aperf_cur.split.hi, cur.mperf_cur.split.hi); + h = max_t(u32, cur.aperf.split.hi, cur.mperf.split.hi); shift_count = fls(h); - cur.aperf_cur.whole >>= shift_count; - cur.mperf_cur.whole >>= shift_count; + cur.aperf.whole >>= shift_count; + cur.mperf.whole >>= shift_count; } - if (((unsigned long)(-1) / 100) < cur.aperf_cur.split.lo) { + if (((unsigned long)(-1) / 100) < cur.aperf.split.lo) { int shift_count = 7; - cur.aperf_cur.split.lo >>= shift_count; - cur.mperf_cur.split.lo >>= shift_count; + cur.aperf.split.lo >>= shift_count; + cur.mperf.split.lo >>= shift_count; } - if (cur.aperf_cur.split.lo && cur.mperf_cur.split.lo) - perf_percent = (cur.aperf_cur.split.lo * 100) / - cur.mperf_cur.split.lo; + if (cur.aperf.split.lo && cur.mperf.split.lo) + perf_percent = (cur.aperf.split.lo * 100) / cur.mperf.split.lo; else perf_percent = 0; #else - if (unlikely(((unsigned long)(-1) / 100) < cur.aperf_cur.whole)) { + if (unlikely(((unsigned long)(-1) / 100) < cur.aperf.whole)) { int shift_count = 7; - cur.aperf_cur.whole >>= shift_count; - cur.mperf_cur.whole >>= shift_count; + cur.aperf.whole >>= shift_count; + cur.mperf.whole >>= shift_count; } - if (cur.aperf_cur.whole && cur.mperf_cur.whole) - perf_percent = (cur.aperf_cur.whole * 100) / - cur.mperf_cur.whole; + if (cur.aperf.whole && cur.mperf.whole) + perf_percent = (cur.aperf.whole * 100) / cur.mperf.whole; else perf_percent = 0; diff --git a/arch/x86/kernel/cpu/cpufreq/longhaul.c b/arch/x86/kernel/cpu/cpufreq/longhaul.c index 0bd48e65a0c..ce2ed3e4aad 100644 --- a/arch/x86/kernel/cpu/cpufreq/longhaul.c +++ b/arch/x86/kernel/cpu/cpufreq/longhaul.c @@ -33,7 +33,6 @@ #include <linux/timex.h> #include <linux/io.h> #include <linux/acpi.h> -#include <linux/kernel.h> #include <asm/msr.h> #include <acpi/processor.h> diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c index 61df7753212..18dfa30795c 100644 --- a/arch/x86/kernel/ftrace.c +++ b/arch/x86/kernel/ftrace.c @@ -18,9 +18,10 @@ #include <linux/init.h> #include <linux/list.h> +#include <trace/syscall.h> + #include <asm/cacheflush.h> #include <asm/ftrace.h> -#include <linux/ftrace.h> #include <asm/nops.h> #include <asm/nmi.h> diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c index 3aaf7b9e3a8..c3fe010d74c 100644 --- a/arch/x86/kernel/irq.c +++ b/arch/x86/kernel/irq.c @@ -65,7 +65,7 @@ static int show_other_interrupts(struct seq_file *p, int prec) seq_printf(p, " Spurious interrupts\n"); #endif if (generic_interrupt_extension) { - seq_printf(p, "PLT: "); + seq_printf(p, "%*s: ", prec, "PLT"); for_each_online_cpu(j) seq_printf(p, "%10u ", irq_stats(j)->generic_irqs); seq_printf(p, " Platform interrupts\n"); diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c index 90f5b9ef5de..745579bc825 100644 --- a/arch/x86/kernel/pci-dma.c +++ b/arch/x86/kernel/pci-dma.c @@ -40,7 +40,7 @@ EXPORT_SYMBOL(bad_dma_address); to older i386. */ struct device x86_dma_fallback_dev = { .init_name = "fallback device", - .coherent_dma_mask = DMA_32BIT_MASK, + .coherent_dma_mask = DMA_BIT_MASK(32), .dma_mask = &x86_dma_fallback_dev.coherent_dma_mask, }; EXPORT_SYMBOL(x86_dma_fallback_dev); @@ -148,7 +148,7 @@ again: if (!is_buffer_dma_capable(dma_mask, addr, size)) { __free_pages(page, get_order(size)); - if (dma_mask < DMA_32BIT_MASK && !(flag & GFP_DMA)) { + if (dma_mask < DMA_BIT_MASK(32) && !(flag & GFP_DMA)) { flag = (flag & ~GFP_DMA32) | GFP_DMA; goto again; } @@ -243,7 +243,7 @@ int dma_supported(struct device *dev, u64 mask) /* Copied from i386. Doesn't make much sense, because it will only work for pci_alloc_coherent. The caller just has to use GFP_DMA in this case. */ - if (mask < DMA_24BIT_MASK) + if (mask < DMA_BIT_MASK(24)) return 0; /* Tell the device to use SAC when IOMMU force is on. This @@ -258,7 +258,7 @@ int dma_supported(struct device *dev, u64 mask) SAC for these. Assume all masks <= 40 bits are of this type. Normally this doesn't make any difference, but gives more gentle handling of IOMMU overflow. */ - if (iommu_sac_force && (mask >= DMA_40BIT_MASK)) { + if (iommu_sac_force && (mask >= DMA_BIT_MASK(40))) { dev_info(dev, "Force SAC with mask %Lx\n", mask); return 0; } diff --git a/arch/x86/kernel/pci-nommu.c b/arch/x86/kernel/pci-nommu.c index c6d703b3932..71d412a09f3 100644 --- a/arch/x86/kernel/pci-nommu.c +++ b/arch/x86/kernel/pci-nommu.c @@ -15,7 +15,7 @@ static int check_addr(char *name, struct device *hwdev, dma_addr_t bus, size_t size) { if (hwdev && !is_buffer_dma_capable(*hwdev->dma_mask, bus, size)) { - if (*hwdev->dma_mask >= DMA_32BIT_MASK) + if (*hwdev->dma_mask >= DMA_BIT_MASK(32)) printk(KERN_ERR "nommu_%s: overflow %Lx+%zu of device mask %Lx\n", name, (long long)bus, size, diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c index fe9345c967d..23b7c8f017e 100644 --- a/arch/x86/kernel/ptrace.c +++ b/arch/x86/kernel/ptrace.c @@ -21,7 +21,6 @@ #include <linux/audit.h> #include <linux/seccomp.h> #include <linux/signal.h> -#include <linux/ftrace.h> #include <asm/uaccess.h> #include <asm/pgtable.h> @@ -35,6 +34,8 @@ #include <asm/proto.h> #include <asm/ds.h> +#include <trace/syscall.h> + #include "tls.h" enum x86_regset { diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index 2aef36d8aca..1340dad417f 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -224,6 +224,14 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "Dell XPS710"), }, }, + { /* Handle problems with rebooting on Dell DXP061 */ + .callback = set_bios_reboot, + .ident = "Dell DXP061", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Dell DXP061"), + }, + }, { } }; diff --git a/arch/x86/mm/pgtable.c b/arch/x86/mm/pgtable.c index 5b7c7c8464f..7aa03a5389f 100644 --- a/arch/x86/mm/pgtable.c +++ b/arch/x86/mm/pgtable.c @@ -345,7 +345,8 @@ void __native_set_fixmap(enum fixed_addresses idx, pte_t pte) fixmaps_set++; } -void native_set_fixmap(enum fixed_addresses idx, unsigned long phys, pgprot_t flags) +void native_set_fixmap(enum fixed_addresses idx, phys_addr_t phys, + pgprot_t flags) { __native_set_fixmap(idx, pfn_pte(phys >> PAGE_SHIFT, flags)); } diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index db3802fb7b8..2a81838a9ab 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -1750,7 +1750,7 @@ __init pgd_t *xen_setup_kernel_pagetable(pgd_t *pgd, } #endif /* CONFIG_X86_64 */ -static void xen_set_fixmap(unsigned idx, unsigned long phys, pgprot_t prot) +static void xen_set_fixmap(unsigned idx, phys_addr_t phys, pgprot_t prot) { pte_t pte; |