diff options
Diffstat (limited to 'arch')
82 files changed, 376 insertions, 575 deletions
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 97f603c4483..d678152db4c 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -245,7 +245,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio2: gpio@48055000 { @@ -256,7 +256,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio3: gpio@48057000 { @@ -267,7 +267,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio4: gpio@48059000 { @@ -278,7 +278,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio5: gpio@4805b000 { @@ -289,7 +289,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio6: gpio@4805d000 { @@ -300,7 +300,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio7: gpio@48051000 { @@ -311,7 +311,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio8: gpio@48053000 { @@ -322,7 +322,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; uart1: serial@4806a000 { diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index 6d6d23c83d3..adadaf97ac0 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -134,6 +134,8 @@ i2c@13860000 { pinctrl-0 = <&i2c0_bus>; pinctrl-names = "default"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <400000>; status = "okay"; usb3503: usb3503@08 { @@ -148,6 +150,10 @@ max77686: pmic@09 { compatible = "maxim,max77686"; + interrupt-parent = <&gpx3>; + interrupts = <2 0>; + pinctrl-names = "default"; + pinctrl-0 = <&max77686_irq>; reg = <0x09>; #clock-cells = <1>; @@ -368,4 +374,11 @@ samsung,pins = "gpx1-3"; samsung,pin-pud = <0>; }; + + max77686_irq: max77686-irq { + samsung,pins = "gpx3-2"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; }; diff --git a/arch/arm/boot/dts/imx53-qsrb.dts b/arch/arm/boot/dts/imx53-qsrb.dts index f1bbf9a3299..82d623d0591 100644 --- a/arch/arm/boot/dts/imx53-qsrb.dts +++ b/arch/arm/boot/dts/imx53-qsrb.dts @@ -28,6 +28,12 @@ MX53_PAD_CSI0_DAT9__I2C1_SCL 0x400001ec >; }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX53_PAD_CSI0_DAT5__GPIO5_23 0x1e4 /* IRQ */ + >; + }; }; }; @@ -38,6 +44,8 @@ pmic: mc34708@8 { compatible = "fsl,mc34708"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; reg = <0x08>; interrupt-parent = <&gpio5>; interrupts = <23 0x8>; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 64fa27b36be..c6c58c1c00e 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -731,7 +731,7 @@ compatible = "fsl,imx53-vpu"; reg = <0x63ff4000 0x1000>; interrupts = <9>; - clocks = <&clks IMX5_CLK_VPU_GATE>, + clocks = <&clks IMX5_CLK_VPU_REFERENCE_GATE>, <&clks IMX5_CLK_VPU_GATE>; clock-names = "per", "ahb"; resets = <&src 1>; diff --git a/arch/arm/boot/dts/imx6dl-hummingboard.dts b/arch/arm/boot/dts/imx6dl-hummingboard.dts index c8e51dd41b8..71598546087 100644 --- a/arch/arm/boot/dts/imx6dl-hummingboard.dts +++ b/arch/arm/boot/dts/imx6dl-hummingboard.dts @@ -58,7 +58,7 @@ sound-spdif { compatible = "fsl,imx-audio-spdif"; - model = "imx-spdif"; + model = "On-board SPDIF"; /* IMX6 doesn't implement this yet */ spdif-controller = <&spdif>; spdif-out; @@ -181,11 +181,13 @@ }; &usbh1 { + disable-over-current; vbus-supply = <®_usbh1_vbus>; status = "okay"; }; &usbotg { + disable-over-current; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hummingboard_usbotg_id>; vbus-supply = <®_usbotg_vbus>; diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts index 8c1cb53464a..4fa25434779 100644 --- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts +++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts @@ -119,7 +119,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; - phy-reset-gpios = <&gpio3 23 0>; + phy-reset-gpios = <&gpio1 25 0>; phy-supply = <&vgen2_1v2_eth>; status = "okay"; }; @@ -339,6 +339,7 @@ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 >; }; diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi index e8e781656b3..6a524ca011e 100644 --- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi +++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi @@ -61,7 +61,7 @@ sound-spdif { compatible = "fsl,imx-audio-spdif"; - model = "imx-spdif"; + model = "Integrated SPDIF"; /* IMX6 doesn't implement this yet */ spdif-controller = <&spdif>; spdif-out; @@ -130,16 +130,23 @@ fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>; }; + pinctrl_cubox_i_usbh1: cubox-i-usbh1 { + fsl,pins = <MX6QDL_PAD_GPIO_3__USB_H1_OC 0x1b0b0>; + }; + pinctrl_cubox_i_usbh1_vbus: cubox-i-usbh1-vbus { fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x4001b0b0>; }; - pinctrl_cubox_i_usbotg_id: cubox-i-usbotg-id { + pinctrl_cubox_i_usbotg: cubox-i-usbotg { /* - * The Cubox-i pulls this low, but as it's pointless + * The Cubox-i pulls ID low, but as it's pointless * leaving it as a pull-up, even if it is just 10uA. */ - fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>; + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059 + MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0 + >; }; pinctrl_cubox_i_usbotg_vbus: cubox-i-usbotg-vbus { @@ -173,13 +180,15 @@ }; &usbh1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_cubox_i_usbh1>; vbus-supply = <®_usbh1_vbus>; status = "okay"; }; &usbotg { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_cubox_i_usbotg_id>; + pinctrl-0 = <&pinctrl_cubox_i_usbotg>; vbus-supply = <®_usbotg_vbus>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi b/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi index d16066608e2..db9f45b2c57 100644 --- a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi +++ b/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi @@ -17,7 +17,7 @@ enet { pinctrl_microsom_enet_ar8035: microsom-enet-ar8035 { fsl,pins = < - MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b8b0 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 /* AR8035 reset */ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x130b0 diff --git a/arch/arm/boot/dts/imx6sx-pinfunc.h b/arch/arm/boot/dts/imx6sx-pinfunc.h index 3e0b816dac0..bb9c6b78cb9 100644 --- a/arch/arm/boot/dts/imx6sx-pinfunc.h +++ b/arch/arm/boot/dts/imx6sx-pinfunc.h @@ -78,7 +78,7 @@ #define MX6SX_PAD_GPIO1_IO07__USDHC2_WP 0x0030 0x0378 0x0870 0x1 0x1 #define MX6SX_PAD_GPIO1_IO07__ENET2_MDIO 0x0030 0x0378 0x0770 0x2 0x0 #define MX6SX_PAD_GPIO1_IO07__AUDMUX_MCLK 0x0030 0x0378 0x0000 0x3 0x0 -#define MX6SX_PAD_GPIO1_IO07__UART1_CTS_B 0x0030 0x0378 0x082C 0x4 0x1 +#define MX6SX_PAD_GPIO1_IO07__UART1_CTS_B 0x0030 0x0378 0x0000 0x4 0x0 #define MX6SX_PAD_GPIO1_IO07__GPIO1_IO_7 0x0030 0x0378 0x0000 0x5 0x0 #define MX6SX_PAD_GPIO1_IO07__SRC_EARLY_RESET 0x0030 0x0378 0x0000 0x6 0x0 #define MX6SX_PAD_GPIO1_IO07__DCIC2_OUT 0x0030 0x0378 0x0000 0x7 0x0 @@ -96,7 +96,7 @@ #define MX6SX_PAD_GPIO1_IO09__WDOG2_WDOG_B 0x0038 0x0380 0x0000 0x1 0x0 #define MX6SX_PAD_GPIO1_IO09__SDMA_EXT_EVENT_1 0x0038 0x0380 0x0820 0x2 0x0 #define MX6SX_PAD_GPIO1_IO09__CCM_OUT0 0x0038 0x0380 0x0000 0x3 0x0 -#define MX6SX_PAD_GPIO1_IO09__UART2_CTS_B 0x0038 0x0380 0x0834 0x4 0x1 +#define MX6SX_PAD_GPIO1_IO09__UART2_CTS_B 0x0038 0x0380 0x0000 0x4 0x0 #define MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9 0x0038 0x0380 0x0000 0x5 0x0 #define MX6SX_PAD_GPIO1_IO09__SRC_INT_BOOT 0x0038 0x0380 0x0000 0x6 0x0 #define MX6SX_PAD_GPIO1_IO09__OBSERVE_MUX_OUT_4 0x0038 0x0380 0x0000 0x7 0x0 @@ -213,7 +213,7 @@ #define MX6SX_PAD_CSI_DATA07__ESAI_TX3_RX2 0x0068 0x03B0 0x079C 0x1 0x1 #define MX6SX_PAD_CSI_DATA07__I2C4_SDA 0x0068 0x03B0 0x07C4 0x2 0x2 #define MX6SX_PAD_CSI_DATA07__KPP_ROW_7 0x0068 0x03B0 0x07DC 0x3 0x0 -#define MX6SX_PAD_CSI_DATA07__UART6_CTS_B 0x0068 0x03B0 0x0854 0x4 0x1 +#define MX6SX_PAD_CSI_DATA07__UART6_CTS_B 0x0068 0x03B0 0x0000 0x4 0x0 #define MX6SX_PAD_CSI_DATA07__GPIO1_IO_21 0x0068 0x03B0 0x0000 0x5 0x0 #define MX6SX_PAD_CSI_DATA07__WEIM_DATA_16 0x0068 0x03B0 0x0000 0x6 0x0 #define MX6SX_PAD_CSI_DATA07__DCIC1_OUT 0x0068 0x03B0 0x0000 0x7 0x0 @@ -254,7 +254,7 @@ #define MX6SX_PAD_CSI_VSYNC__CSI1_VSYNC 0x0078 0x03C0 0x0708 0x0 0x0 #define MX6SX_PAD_CSI_VSYNC__ESAI_TX5_RX0 0x0078 0x03C0 0x07A4 0x1 0x1 #define MX6SX_PAD_CSI_VSYNC__AUDMUX_AUD6_RXD 0x0078 0x03C0 0x0674 0x2 0x1 -#define MX6SX_PAD_CSI_VSYNC__UART4_CTS_B 0x0078 0x03C0 0x0844 0x3 0x3 +#define MX6SX_PAD_CSI_VSYNC__UART4_CTS_B 0x0078 0x03C0 0x0000 0x3 0x0 #define MX6SX_PAD_CSI_VSYNC__MQS_RIGHT 0x0078 0x03C0 0x0000 0x4 0x0 #define MX6SX_PAD_CSI_VSYNC__GPIO1_IO_25 0x0078 0x03C0 0x0000 0x5 0x0 #define MX6SX_PAD_CSI_VSYNC__WEIM_DATA_24 0x0078 0x03C0 0x0000 0x6 0x0 @@ -352,7 +352,7 @@ #define MX6SX_PAD_ENET2_TX_CLK__ENET2_TX_CLK 0x00A0 0x03E8 0x0000 0x0 0x0 #define MX6SX_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x00A0 0x03E8 0x076C 0x1 0x1 #define MX6SX_PAD_ENET2_TX_CLK__I2C3_SDA 0x00A0 0x03E8 0x07BC 0x2 0x1 -#define MX6SX_PAD_ENET2_TX_CLK__UART1_CTS_B 0x00A0 0x03E8 0x082C 0x3 0x3 +#define MX6SX_PAD_ENET2_TX_CLK__UART1_CTS_B 0x00A0 0x03E8 0x0000 0x3 0x0 #define MX6SX_PAD_ENET2_TX_CLK__MLB_CLK 0x00A0 0x03E8 0x07E8 0x4 0x1 #define MX6SX_PAD_ENET2_TX_CLK__GPIO2_IO_9 0x00A0 0x03E8 0x0000 0x5 0x0 #define MX6SX_PAD_ENET2_TX_CLK__USB_OTG2_PWR 0x00A0 0x03E8 0x0000 0x6 0x0 @@ -404,7 +404,7 @@ #define MX6SX_PAD_KEY_COL4__SAI2_RX_BCLK 0x00B4 0x03FC 0x0808 0x7 0x0 #define MX6SX_PAD_KEY_ROW0__KPP_ROW_0 0x00B8 0x0400 0x0000 0x0 0x0 #define MX6SX_PAD_KEY_ROW0__USDHC3_WP 0x00B8 0x0400 0x0000 0x1 0x0 -#define MX6SX_PAD_KEY_ROW0__UART6_CTS_B 0x00B8 0x0400 0x0854 0x2 0x3 +#define MX6SX_PAD_KEY_ROW0__UART6_CTS_B 0x00B8 0x0400 0x0000 0x2 0x0 #define MX6SX_PAD_KEY_ROW0__ECSPI1_MOSI 0x00B8 0x0400 0x0718 0x3 0x0 #define MX6SX_PAD_KEY_ROW0__AUDMUX_AUD5_TXD 0x00B8 0x0400 0x0660 0x4 0x0 #define MX6SX_PAD_KEY_ROW0__GPIO2_IO_15 0x00B8 0x0400 0x0000 0x5 0x0 @@ -423,7 +423,7 @@ #define MX6SX_PAD_KEY_ROW1__M4_NMI 0x00BC 0x0404 0x0000 0x8 0x0 #define MX6SX_PAD_KEY_ROW2__KPP_ROW_2 0x00C0 0x0408 0x0000 0x0 0x0 #define MX6SX_PAD_KEY_ROW2__USDHC4_WP 0x00C0 0x0408 0x0878 0x1 0x1 -#define MX6SX_PAD_KEY_ROW2__UART5_CTS_B 0x00C0 0x0408 0x084C 0x2 0x3 +#define MX6SX_PAD_KEY_ROW2__UART5_CTS_B 0x00C0 0x0408 0x0000 0x2 0x0 #define MX6SX_PAD_KEY_ROW2__CAN1_RX 0x00C0 0x0408 0x068C 0x3 0x1 #define MX6SX_PAD_KEY_ROW2__CANFD_RX1 0x00C0 0x0408 0x0694 0x4 0x1 #define MX6SX_PAD_KEY_ROW2__GPIO2_IO_17 0x00C0 0x0408 0x0000 0x5 0x0 @@ -815,7 +815,7 @@ #define MX6SX_PAD_NAND_DATA05__RAWNAND_DATA05 0x0164 0x04AC 0x0000 0x0 0x0 #define MX6SX_PAD_NAND_DATA05__USDHC2_DATA5 0x0164 0x04AC 0x0000 0x1 0x0 #define MX6SX_PAD_NAND_DATA05__QSPI2_B_DQS 0x0164 0x04AC 0x0000 0x2 0x0 -#define MX6SX_PAD_NAND_DATA05__UART3_CTS_B 0x0164 0x04AC 0x083C 0x3 0x1 +#define MX6SX_PAD_NAND_DATA05__UART3_CTS_B 0x0164 0x04AC 0x0000 0x3 0x0 #define MX6SX_PAD_NAND_DATA05__AUDMUX_AUD4_RXC 0x0164 0x04AC 0x064C 0x4 0x0 #define MX6SX_PAD_NAND_DATA05__GPIO4_IO_9 0x0164 0x04AC 0x0000 0x5 0x0 #define MX6SX_PAD_NAND_DATA05__WEIM_AD_5 0x0164 0x04AC 0x0000 0x6 0x0 @@ -957,7 +957,7 @@ #define MX6SX_PAD_QSPI1A_SS1_B__SIM_M_HADDR_12 0x019C 0x04E4 0x0000 0x7 0x0 #define MX6SX_PAD_QSPI1A_SS1_B__SDMA_DEBUG_PC_3 0x019C 0x04E4 0x0000 0x9 0x0 #define MX6SX_PAD_QSPI1B_DATA0__QSPI1_B_DATA_0 0x01A0 0x04E8 0x0000 0x0 0x0 -#define MX6SX_PAD_QSPI1B_DATA0__UART3_CTS_B 0x01A0 0x04E8 0x083C 0x1 0x4 +#define MX6SX_PAD_QSPI1B_DATA0__UART3_CTS_B 0x01A0 0x04E8 0x0000 0x1 0x0 #define MX6SX_PAD_QSPI1B_DATA0__ECSPI3_MOSI 0x01A0 0x04E8 0x0738 0x2 0x1 #define MX6SX_PAD_QSPI1B_DATA0__ESAI_RX_FS 0x01A0 0x04E8 0x0778 0x3 0x2 #define MX6SX_PAD_QSPI1B_DATA0__CSI1_DATA_22 0x01A0 0x04E8 0x06F4 0x4 0x1 @@ -1236,7 +1236,7 @@ #define MX6SX_PAD_SD1_DATA2__AUDMUX_AUD5_TXFS 0x0230 0x0578 0x0670 0x1 0x1 #define MX6SX_PAD_SD1_DATA2__PWM3_OUT 0x0230 0x0578 0x0000 0x2 0x0 #define MX6SX_PAD_SD1_DATA2__GPT_COMPARE2 0x0230 0x0578 0x0000 0x3 0x0 -#define MX6SX_PAD_SD1_DATA2__UART2_CTS_B 0x0230 0x0578 0x0834 0x4 0x2 +#define MX6SX_PAD_SD1_DATA2__UART2_CTS_B 0x0230 0x0578 0x0000 0x4 0x0 #define MX6SX_PAD_SD1_DATA2__GPIO6_IO_4 0x0230 0x0578 0x0000 0x5 0x0 #define MX6SX_PAD_SD1_DATA2__ECSPI4_RDY 0x0230 0x0578 0x0000 0x6 0x0 #define MX6SX_PAD_SD1_DATA2__CCM_OUT0 0x0230 0x0578 0x0000 0x7 0x0 @@ -1315,7 +1315,7 @@ #define MX6SX_PAD_SD2_DATA3__VADC_CLAMP_CURRENT_3 0x024C 0x0594 0x0000 0x8 0x0 #define MX6SX_PAD_SD2_DATA3__MMDC_DEBUG_31 0x024C 0x0594 0x0000 0x9 0x0 #define MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x0250 0x0598 0x0000 0x0 0x0 -#define MX6SX_PAD_SD3_CLK__UART4_CTS_B 0x0250 0x0598 0x0844 0x1 0x0 +#define MX6SX_PAD_SD3_CLK__UART4_CTS_B 0x0250 0x0598 0x0000 0x1 0x0 #define MX6SX_PAD_SD3_CLK__ECSPI4_SCLK 0x0250 0x0598 0x0740 0x2 0x0 #define MX6SX_PAD_SD3_CLK__AUDMUX_AUD6_RXFS 0x0250 0x0598 0x0680 0x3 0x0 #define MX6SX_PAD_SD3_CLK__LCDIF2_VSYNC 0x0250 0x0598 0x0000 0x4 0x0 @@ -1409,7 +1409,7 @@ #define MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x0274 0x05BC 0x0000 0x0 0x0 #define MX6SX_PAD_SD3_DATA7__CAN1_RX 0x0274 0x05BC 0x068C 0x1 0x0 #define MX6SX_PAD_SD3_DATA7__CANFD_RX1 0x0274 0x05BC 0x0694 0x2 0x0 -#define MX6SX_PAD_SD3_DATA7__UART3_CTS_B 0x0274 0x05BC 0x083C 0x3 0x3 +#define MX6SX_PAD_SD3_DATA7__UART3_CTS_B 0x0274 0x05BC 0x0000 0x3 0x0 #define MX6SX_PAD_SD3_DATA7__LCDIF2_DATA_5 0x0274 0x05BC 0x0000 0x4 0x0 #define MX6SX_PAD_SD3_DATA7__GPIO7_IO_9 0x0274 0x05BC 0x0000 0x5 0x0 #define MX6SX_PAD_SD3_DATA7__ENET1_1588_EVENT0_IN 0x0274 0x05BC 0x0000 0x6 0x0 @@ -1510,7 +1510,7 @@ #define MX6SX_PAD_SD4_DATA6__SDMA_DEBUG_EVENT_CHANNEL_1 0x0298 0x05E0 0x0000 0x9 0x0 #define MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x029C 0x05E4 0x0000 0x0 0x0 #define MX6SX_PAD_SD4_DATA7__RAWNAND_DATA08 0x029C 0x05E4 0x0000 0x1 0x0 -#define MX6SX_PAD_SD4_DATA7__UART5_CTS_B 0x029C 0x05E4 0x084C 0x2 0x1 +#define MX6SX_PAD_SD4_DATA7__UART5_CTS_B 0x029C 0x05E4 0x0000 0x2 0x0 #define MX6SX_PAD_SD4_DATA7__ECSPI3_SS0 0x029C 0x05E4 0x073C 0x3 0x0 #define MX6SX_PAD_SD4_DATA7__LCDIF2_DATA_15 0x029C 0x05E4 0x0000 0x4 0x0 #define MX6SX_PAD_SD4_DATA7__GPIO6_IO_21 0x029C 0x05E4 0x0000 0x5 0x0 diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index 3c3e6da1dea..a9aae88b74f 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -292,6 +292,7 @@ &uart3 { pinctrl-names = "default"; pinctrl-0 = <&uart3_pins>; + interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>; }; &gpio1 { diff --git a/arch/arm/boot/dts/omap3430-sdp.dts b/arch/arm/boot/dts/omap3430-sdp.dts index 02f69f4a8fd..9bad94efe1c 100644 --- a/arch/arm/boot/dts/omap3430-sdp.dts +++ b/arch/arm/boot/dts/omap3430-sdp.dts @@ -107,7 +107,7 @@ #address-cells = <1>; #size-cells = <1>; reg = <1 0 0x08000000>; - ti,nand-ecc-opt = "ham1"; + ti,nand-ecc-opt = "sw"; nand-bus-width = <8>; gpmc,cs-on-ns = <0>; gpmc,cs-rd-off-ns = <36>; diff --git a/arch/arm/boot/dts/omap54xx-clocks.dtsi b/arch/arm/boot/dts/omap54xx-clocks.dtsi index e67a23b5d78..58c27466f01 100644 --- a/arch/arm/boot/dts/omap54xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap54xx-clocks.dtsi @@ -367,10 +367,12 @@ l3_iclk_div: l3_iclk_div { #clock-cells = <0>; - compatible = "fixed-factor-clock"; + compatible = "ti,divider-clock"; + ti,max-div = <2>; + ti,bit-shift = <4>; + reg = <0x100>; clocks = <&dpll_core_h12x2_ck>; - clock-mult = <1>; - clock-div = <1>; + ti,index-power-of-two; }; gpu_l3_iclk: gpu_l3_iclk { @@ -383,10 +385,12 @@ l4_root_clk_div: l4_root_clk_div { #clock-cells = <0>; - compatible = "fixed-factor-clock"; + compatible = "ti,divider-clock"; + ti,max-div = <2>; + ti,bit-shift = <8>; + reg = <0x100>; clocks = <&l3_iclk_div>; - clock-mult = <1>; - clock-div = <1>; + ti,index-power-of-two; }; slimbus1_slimbus_clk: slimbus1_slimbus_clk { diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index 23486c081a6..be59014474b 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -275,11 +275,6 @@ renesas,function = "msiof0"; }; - i2c6_pins: i2c6 { - renesas,groups = "i2c6"; - renesas,function = "i2c6"; - }; - usb0_pins: usb0 { renesas,groups = "usb0"; renesas,function = "usb0"; @@ -420,8 +415,6 @@ }; &i2c6 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c6_pins>; status = "okay"; clock-frequency = <100000>; diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts index 042f821d9e4..c9d912da614 100644 --- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts +++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts @@ -149,6 +149,8 @@ &mmc0 { /* sdmmc */ num-slots = <1>; status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>; vmmc-supply = <&vcc_sd0>; slot@0 { diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts index 171b610db70..5e4e3c238b2 100644 --- a/arch/arm/boot/dts/rk3188-radxarock.dts +++ b/arch/arm/boot/dts/rk3188-radxarock.dts @@ -179,6 +179,8 @@ &mmc0 { num-slots = <1>; status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>; vmmc-supply = <&vcc_sd0>; slot@0 { diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts index 4a2000c620a..3e97a669f15 100644 --- a/arch/arm/boot/dts/ste-snowball.dts +++ b/arch/arm/boot/dts/ste-snowball.dts @@ -116,7 +116,6 @@ msp2: msp@80117000 { pinctrl-names = "default"; pinctrl-0 = <&msp2_default_mode>; - status = "okay"; }; msp3: msp@80125000 { diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index 44b07e512c2..e06fbfc55bb 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -660,6 +660,8 @@ clock-frequency = <100000>; resets = <&apb2_rst 0>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; i2c1: i2c@01c2b000 { @@ -670,6 +672,8 @@ clock-frequency = <100000>; resets = <&apb2_rst 1>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; i2c2: i2c@01c2b400 { @@ -680,6 +684,8 @@ clock-frequency = <100000>; resets = <&apb2_rst 2>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; i2c3: i2c@01c2b800 { @@ -690,6 +696,8 @@ clock-frequency = <100000>; resets = <&apb2_rst 3>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; gmac: ethernet@01c30000 { diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi index 8adaa7871dd..a5446cba980 100644 --- a/arch/arm/boot/dts/tegra30-apalis.dtsi +++ b/arch/arm/boot/dts/tegra30-apalis.dtsi @@ -423,7 +423,7 @@ vcc4-supply = <&sys_3v3_reg>; vcc5-supply = <&sys_3v3_reg>; vcc6-supply = <&vio_reg>; - vcc7-supply = <&sys_5v0_reg>; + vcc7-supply = <&charge_pump_5v0_reg>; vccio-supply = <&sys_3v3_reg>; regulators { @@ -674,5 +674,14 @@ regulator-max-microvolt = <3300000>; regulator-always-on; }; + + charge_pump_5v0_reg: regulator@101 { + compatible = "regulator-fixed"; + reg = <101>; + regulator-name = "5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; }; }; diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi index bf16f8e6562..c4ed1bec4d9 100644 --- a/arch/arm/boot/dts/tegra30-colibri.dtsi +++ b/arch/arm/boot/dts/tegra30-colibri.dtsi @@ -201,7 +201,7 @@ vcc4-supply = <&sys_3v3_reg>; vcc5-supply = <&sys_3v3_reg>; vcc6-supply = <&vio_reg>; - vcc7-supply = <&sys_5v0_reg>; + vcc7-supply = <&charge_pump_5v0_reg>; vccio-supply = <&sys_3v3_reg>; regulators { @@ -373,5 +373,14 @@ regulator-max-microvolt = <3300000>; regulator-always-on; }; + + charge_pump_5v0_reg: regulator@101 { + compatible = "regulator-fixed"; + reg = <101>; + regulator-name = "5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; }; }; diff --git a/arch/arm/boot/dts/twl6030.dtsi b/arch/arm/boot/dts/twl6030.dtsi index 2e3bd3172b2..55eb35f068f 100644 --- a/arch/arm/boot/dts/twl6030.dtsi +++ b/arch/arm/boot/dts/twl6030.dtsi @@ -83,10 +83,6 @@ regulator-always-on; }; - clk32kg: regulator-clk32kg { - compatible = "ti,twl6030-clk32kg"; - }; - twl_usb_comparator: usb-comparator { compatible = "ti,twl6030-usb"; interrupts = <4>, <10>; diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts index 11d733406c7..b8a5e8c68f0 100644 --- a/arch/arm/boot/dts/vf610-twr.dts +++ b/arch/arm/boot/dts/vf610-twr.dts @@ -168,7 +168,7 @@ }; pinctrl_esdhc1: esdhc1grp { - fsl,fsl,pins = < + fsl,pins = < VF610_PAD_PTA24__ESDHC1_CLK 0x31ef VF610_PAD_PTA25__ESDHC1_CMD 0x31ef VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile index 67c492aabf4..b19a3965254 100644 --- a/arch/arm/mach-bcm/Makefile +++ b/arch/arm/mach-bcm/Makefile @@ -36,5 +36,4 @@ obj-$(CONFIG_ARCH_BCM_5301X) += bcm_5301x.o ifeq ($(CONFIG_ARCH_BRCMSTB),y) obj-y += brcmstb.o -obj-$(CONFIG_SMP) += headsmp-brcmstb.o platsmp-brcmstb.o endif diff --git a/arch/arm/mach-bcm/brcmstb.h b/arch/arm/mach-bcm/brcmstb.h deleted file mode 100644 index ec0c3d112b3..00000000000 --- a/arch/arm/mach-bcm/brcmstb.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * Copyright (C) 2013-2014 Broadcom Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __BRCMSTB_H__ -#define __BRCMSTB_H__ - -void brcmstb_secondary_startup(void); - -#endif /* __BRCMSTB_H__ */ diff --git a/arch/arm/mach-bcm/headsmp-brcmstb.S b/arch/arm/mach-bcm/headsmp-brcmstb.S deleted file mode 100644 index 199c1ea5824..00000000000 --- a/arch/arm/mach-bcm/headsmp-brcmstb.S +++ /dev/null @@ -1,33 +0,0 @@ -/* - * SMP boot code for secondary CPUs - * Based on arch/arm/mach-tegra/headsmp.S - * - * Copyright (C) 2010 NVIDIA, Inc. - * Copyright (C) 2013-2014 Broadcom Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <asm/assembler.h> -#include <linux/linkage.h> -#include <linux/init.h> - - .section ".text.head", "ax" - -ENTRY(brcmstb_secondary_startup) - /* - * Ensure CPU is in a sane state by disabling all IRQs and switching - * into SVC mode. - */ - setmode PSR_I_BIT | PSR_F_BIT | SVC_MODE, r0 - - bl v7_invalidate_l1 - b secondary_startup -ENDPROC(brcmstb_secondary_startup) diff --git a/arch/arm/mach-bcm/platsmp-brcmstb.c b/arch/arm/mach-bcm/platsmp-brcmstb.c deleted file mode 100644 index af780e9c23a..00000000000 --- a/arch/arm/mach-bcm/platsmp-brcmstb.c +++ /dev/null @@ -1,363 +0,0 @@ -/* - * Broadcom STB CPU SMP and hotplug support for ARM - * - * Copyright (C) 2013-2014 Broadcom Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/delay.h> -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/io.h> -#include <linux/of_address.h> -#include <linux/of_platform.h> -#include <linux/printk.h> -#include <linux/regmap.h> -#include <linux/smp.h> -#include <linux/mfd/syscon.h> -#include <linux/spinlock.h> - -#include <asm/cacheflush.h> -#include <asm/cp15.h> -#include <asm/mach-types.h> -#include <asm/smp_plat.h> - -#include "brcmstb.h" - -enum { - ZONE_MAN_CLKEN_MASK = BIT(0), - ZONE_MAN_RESET_CNTL_MASK = BIT(1), - ZONE_MAN_MEM_PWR_MASK = BIT(4), - ZONE_RESERVED_1_MASK = BIT(5), - ZONE_MAN_ISO_CNTL_MASK = BIT(6), - ZONE_MANUAL_CONTROL_MASK = BIT(7), - ZONE_PWR_DN_REQ_MASK = BIT(9), - ZONE_PWR_UP_REQ_MASK = BIT(10), - ZONE_BLK_RST_ASSERT_MASK = BIT(12), - ZONE_PWR_OFF_STATE_MASK = BIT(25), - ZONE_PWR_ON_STATE_MASK = BIT(26), - ZONE_DPG_PWR_STATE_MASK = BIT(28), - ZONE_MEM_PWR_STATE_MASK = BIT(29), - ZONE_RESET_STATE_MASK = BIT(31), - CPU0_PWR_ZONE_CTRL_REG = 1, - CPU_RESET_CONFIG_REG = 2, -}; - -static void __iomem *cpubiuctrl_block; -static void __iomem *hif_cont_block; -static u32 cpu0_pwr_zone_ctrl_reg; -static u32 cpu_rst_cfg_reg; -static u32 hif_cont_reg; - -#ifdef CONFIG_HOTPLUG_CPU -static DEFINE_PER_CPU_ALIGNED(int, per_cpu_sw_state); - -static int per_cpu_sw_state_rd(u32 cpu) -{ - sync_cache_r(SHIFT_PERCPU_PTR(&per_cpu_sw_state, per_cpu_offset(cpu))); - return per_cpu(per_cpu_sw_state, cpu); -} - -static void per_cpu_sw_state_wr(u32 cpu, int val) -{ - per_cpu(per_cpu_sw_state, cpu) = val; - dmb(); - sync_cache_w(SHIFT_PERCPU_PTR(&per_cpu_sw_state, per_cpu_offset(cpu))); - dsb_sev(); -} -#else -static inline void per_cpu_sw_state_wr(u32 cpu, int val) { } -#endif - -static void __iomem *pwr_ctrl_get_base(u32 cpu) -{ - void __iomem *base = cpubiuctrl_block + cpu0_pwr_zone_ctrl_reg; - base += (cpu_logical_map(cpu) * 4); - return base; -} - -static u32 pwr_ctrl_rd(u32 cpu) -{ - void __iomem *base = pwr_ctrl_get_base(cpu); - return readl_relaxed(base); -} - -static void pwr_ctrl_wr(u32 cpu, u32 val) -{ - void __iomem *base = pwr_ctrl_get_base(cpu); - writel(val, base); -} - -static void cpu_rst_cfg_set(u32 cpu, int set) -{ - u32 val; - val = readl_relaxed(cpubiuctrl_block + cpu_rst_cfg_reg); - if (set) - val |= BIT(cpu_logical_map(cpu)); - else - val &= ~BIT(cpu_logical_map(cpu)); - writel_relaxed(val, cpubiuctrl_block + cpu_rst_cfg_reg); -} - -static void cpu_set_boot_addr(u32 cpu, unsigned long boot_addr) -{ - const int reg_ofs = cpu_logical_map(cpu) * 8; - writel_relaxed(0, hif_cont_block + hif_cont_reg + reg_ofs); - writel_relaxed(boot_addr, hif_cont_block + hif_cont_reg + 4 + reg_ofs); -} - -static void brcmstb_cpu_boot(u32 cpu) -{ - pr_info("SMP: Booting CPU%d...\n", cpu); - - /* - * set the reset vector to point to the secondary_startup - * routine - */ - cpu_set_boot_addr(cpu, virt_to_phys(brcmstb_secondary_startup)); - - /* unhalt the cpu */ - cpu_rst_cfg_set(cpu, 0); -} - -static void brcmstb_cpu_power_on(u32 cpu) -{ - /* - * The secondary cores power was cut, so we must go through - * power-on initialization. - */ - u32 tmp; - - pr_info("SMP: Powering up CPU%d...\n", cpu); - - /* Request zone power up */ - pwr_ctrl_wr(cpu, ZONE_PWR_UP_REQ_MASK); - - /* Wait for the power up FSM to complete */ - do { - tmp = pwr_ctrl_rd(cpu); - } while (!(tmp & ZONE_PWR_ON_STATE_MASK)); - - per_cpu_sw_state_wr(cpu, 1); -} - -static int brcmstb_cpu_get_power_state(u32 cpu) -{ - int tmp = pwr_ctrl_rd(cpu); - return (tmp & ZONE_RESET_STATE_MASK) ? 0 : 1; -} - -#ifdef CONFIG_HOTPLUG_CPU - -static void brcmstb_cpu_die(u32 cpu) -{ - v7_exit_coherency_flush(all); - - /* Prevent all interrupts from reaching this CPU. */ - arch_local_irq_disable(); - - /* - * Final full barrier to ensure everything before this instruction has - * quiesced. - */ - isb(); - dsb(); - - per_cpu_sw_state_wr(cpu, 0); - - /* Sit and wait to die */ - wfi(); - - /* We should never get here... */ - panic("Spurious interrupt on CPU %d received!\n", cpu); -} - -static int brcmstb_cpu_kill(u32 cpu) -{ - u32 tmp; - - pr_info("SMP: Powering down CPU%d...\n", cpu); - - while (per_cpu_sw_state_rd(cpu)) - ; - - /* Program zone reset */ - pwr_ctrl_wr(cpu, ZONE_RESET_STATE_MASK | ZONE_BLK_RST_ASSERT_MASK | - ZONE_PWR_DN_REQ_MASK); - - /* Verify zone reset */ - tmp = pwr_ctrl_rd(cpu); - if (!(tmp & ZONE_RESET_STATE_MASK)) - pr_err("%s: Zone reset bit for CPU %d not asserted!\n", - __func__, cpu); - - /* Wait for power down */ - do { - tmp = pwr_ctrl_rd(cpu); - } while (!(tmp & ZONE_PWR_OFF_STATE_MASK)); - - /* Settle-time from Broadcom-internal DVT reference code */ - udelay(7); - - /* Assert reset on the CPU */ - cpu_rst_cfg_set(cpu, 1); - - return 1; -} - -#endif /* CONFIG_HOTPLUG_CPU */ - -static int __init setup_hifcpubiuctrl_regs(struct device_node *np) -{ - int rc = 0; - char *name; - struct device_node *syscon_np = NULL; - - name = "syscon-cpu"; - - syscon_np = of_parse_phandle(np, name, 0); - if (!syscon_np) { - pr_err("can't find phandle %s\n", name); - rc = -EINVAL; - goto cleanup; - } - - cpubiuctrl_block = of_iomap(syscon_np, 0); - if (!cpubiuctrl_block) { - pr_err("iomap failed for cpubiuctrl_block\n"); - rc = -EINVAL; - goto cleanup; - } - - rc = of_property_read_u32_index(np, name, CPU0_PWR_ZONE_CTRL_REG, - &cpu0_pwr_zone_ctrl_reg); - if (rc) { - pr_err("failed to read 1st entry from %s property (%d)\n", name, - rc); - rc = -EINVAL; - goto cleanup; - } - - rc = of_property_read_u32_index(np, name, CPU_RESET_CONFIG_REG, - &cpu_rst_cfg_reg); - if (rc) { - pr_err("failed to read 2nd entry from %s property (%d)\n", name, - rc); - rc = -EINVAL; - goto cleanup; - } - -cleanup: - if (syscon_np) - of_node_put(syscon_np); - - return rc; -} - -static int __init setup_hifcont_regs(struct device_node *np) -{ - int rc = 0; - char *name; - struct device_node *syscon_np = NULL; - - name = "syscon-cont"; - - syscon_np = of_parse_phandle(np, name, 0); - if (!syscon_np) { - pr_err("can't find phandle %s\n", name); - rc = -EINVAL; - goto cleanup; - } - - hif_cont_block = of_iomap(syscon_np, 0); - if (!hif_cont_block) { - pr_err("iomap failed for hif_cont_block\n"); - rc = -EINVAL; - goto cleanup; - } - - /* offset is at top of hif_cont_block */ - hif_cont_reg = 0; - -cleanup: - if (syscon_np) - of_node_put(syscon_np); - - return rc; -} - -static void __init brcmstb_cpu_ctrl_setup(unsigned int max_cpus) -{ - int rc; - struct device_node *np; - char *name; - - name = "brcm,brcmstb-smpboot"; - np = of_find_compatible_node(NULL, NULL, name); - if (!np) { - pr_err("can't find compatible node %s\n", name); - return; - } - - rc = setup_hifcpubiuctrl_regs(np); - if (rc) - return; - - rc = setup_hifcont_regs(np); - if (rc) - return; -} - -static DEFINE_SPINLOCK(boot_lock); - -static void brcmstb_secondary_init(unsigned int cpu) -{ - /* - * Synchronise with the boot thread. - */ - spin_lock(&boot_lock); - spin_unlock(&boot_lock); -} - -static int brcmstb_boot_secondary(unsigned int cpu, struct task_struct *idle) -{ - /* - * set synchronisation state between this boot processor - * and the secondary one - */ - spin_lock(&boot_lock); - - /* Bring up power to the core if necessary */ - if (brcmstb_cpu_get_power_state(cpu) == 0) - brcmstb_cpu_power_on(cpu); - - brcmstb_cpu_boot(cpu); - - /* - * now the secondary core is starting up let it run its - * calibrations, then wait for it to finish - */ - spin_unlock(&boot_lock); - - return 0; -} - -static struct smp_operations brcmstb_smp_ops __initdata = { - .smp_prepare_cpus = brcmstb_cpu_ctrl_setup, - .smp_secondary_init = brcmstb_secondary_init, - .smp_boot_secondary = brcmstb_boot_secondary, -#ifdef CONFIG_HOTPLUG_CPU - .cpu_kill = brcmstb_cpu_kill, - .cpu_die = brcmstb_cpu_die, -#endif -}; - -CPU_METHOD_OF_DECLARE(brcmstb_smp, "brcm,brahma-b15", &brcmstb_smp_ops); diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 9de84a215ab..be9a51afe05 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -85,7 +85,6 @@ config SOC_IMX25 config SOC_IMX27 bool - select ARCH_HAS_OPP select CPU_ARM926T select IMX_HAVE_IOMUX_V1 select MXC_AVIC @@ -659,7 +658,6 @@ comment "Device tree only" config SOC_IMX5 bool - select ARCH_HAS_OPP select HAVE_IMX_SRC select MXC_TZIC diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index ac88599ca08..23c02932bf8 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -93,9 +93,11 @@ obj-$(CONFIG_HAVE_IMX_ANATOP) += anatop.o obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o obj-$(CONFIG_HAVE_IMX_SRC) += src.o +ifdef CONFIG_SOC_IMX6 AFLAGS_headsmp.o :=-Wa,-march=armv7-a obj-$(CONFIG_SMP) += headsmp.o platsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o +endif obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o mach-imx6q.o obj-$(CONFIG_SOC_IMX6SL) += clk-imx6sl.o mach-imx6sl.o obj-$(CONFIG_SOC_IMX6SX) += clk-imx6sx.o mach-imx6sx.o diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index 6cceb7765c1..29d412975af 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -194,6 +194,10 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) clk[IMX6QDL_CLK_PLL3_80M] = imx_clk_fixed_factor("pll3_80m", "pll3_usb_otg", 1, 6); clk[IMX6QDL_CLK_PLL3_60M] = imx_clk_fixed_factor("pll3_60m", "pll3_usb_otg", 1, 8); clk[IMX6QDL_CLK_TWD] = imx_clk_fixed_factor("twd", "arm", 1, 2); + if (cpu_is_imx6dl()) { + clk[IMX6QDL_CLK_GPU2D_AXI] = imx_clk_fixed_factor("gpu2d_axi", "mmdc_ch0_axi_podf", 1, 1); + clk[IMX6QDL_CLK_GPU3D_AXI] = imx_clk_fixed_factor("gpu3d_axi", "mmdc_ch0_axi_podf", 1, 1); + } clk[IMX6QDL_CLK_PLL4_POST_DIV] = clk_register_divider_table(NULL, "pll4_post_div", "pll4_audio", CLK_SET_RATE_PARENT, base + 0x70, 19, 2, 0, post_div_table, &imx_ccm_lock); clk[IMX6QDL_CLK_PLL4_AUDIO_DIV] = clk_register_divider(NULL, "pll4_audio_div", "pll4_post_div", CLK_SET_RATE_PARENT, base + 0x170, 15, 1, 0, &imx_ccm_lock); @@ -217,8 +221,10 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) clk[IMX6QDL_CLK_ESAI_SEL] = imx_clk_mux("esai_sel", base + 0x20, 19, 2, audio_sels, ARRAY_SIZE(audio_sels)); clk[IMX6QDL_CLK_ASRC_SEL] = imx_clk_mux("asrc_sel", base + 0x30, 7, 2, audio_sels, ARRAY_SIZE(audio_sels)); clk[IMX6QDL_CLK_SPDIF_SEL] = imx_clk_mux("spdif_sel", base + 0x30, 20, 2, audio_sels, ARRAY_SIZE(audio_sels)); - clk[IMX6QDL_CLK_GPU2D_AXI] = imx_clk_mux("gpu2d_axi", base + 0x18, 0, 1, gpu_axi_sels, ARRAY_SIZE(gpu_axi_sels)); - clk[IMX6QDL_CLK_GPU3D_AXI] = imx_clk_mux("gpu3d_axi", base + 0x18, 1, 1, gpu_axi_sels, ARRAY_SIZE(gpu_axi_sels)); + if (cpu_is_imx6q()) { + clk[IMX6QDL_CLK_GPU2D_AXI] = imx_clk_mux("gpu2d_axi", base + 0x18, 0, 1, gpu_axi_sels, ARRAY_SIZE(gpu_axi_sels)); + clk[IMX6QDL_CLK_GPU3D_AXI] = imx_clk_mux("gpu3d_axi", base + 0x18, 1, 1, gpu_axi_sels, ARRAY_SIZE(gpu_axi_sels)); + } clk[IMX6QDL_CLK_GPU2D_CORE_SEL] = imx_clk_mux("gpu2d_core_sel", base + 0x18, 16, 2, gpu2d_core_sels, ARRAY_SIZE(gpu2d_core_sels)); clk[IMX6QDL_CLK_GPU3D_CORE_SEL] = imx_clk_mux("gpu3d_core_sel", base + 0x18, 4, 2, gpu3d_core_sels, ARRAY_SIZE(gpu3d_core_sels)); clk[IMX6QDL_CLK_GPU3D_SHADER_SEL] = imx_clk_mux("gpu3d_shader_sel", base + 0x18, 8, 2, gpu3d_shader_sels, ARRAY_SIZE(gpu3d_shader_sels)); diff --git a/arch/arm/mach-imx/suspend-imx6.S b/arch/arm/mach-imx/suspend-imx6.S index 74b50f1982d..ca4ea2daf25 100644 --- a/arch/arm/mach-imx/suspend-imx6.S +++ b/arch/arm/mach-imx/suspend-imx6.S @@ -173,6 +173,8 @@ ENTRY(imx6_suspend) ldr r6, [r11, #0x0] ldr r11, [r0, #PM_INFO_MX6Q_GPC_V_OFFSET] ldr r6, [r11, #0x0] + ldr r11, [r0, #PM_INFO_MX6Q_IOMUXC_V_OFFSET] + ldr r6, [r11, #0x0] /* use r11 to store the IO address */ ldr r11, [r0, #PM_INFO_MX6Q_SRC_V_OFFSET] diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c index e87f2a83d6b..2d245c2e641 100644 --- a/arch/arm/mach-omap2/board-flash.c +++ b/arch/arm/mach-omap2/board-flash.c @@ -142,7 +142,7 @@ __init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs, board_nand_data.nr_parts = nr_parts; board_nand_data.devsize = nand_type; - board_nand_data.ecc_opt = OMAP_ECC_HAM1_CODE_HW; + board_nand_data.ecc_opt = OMAP_ECC_HAM1_CODE_SW; gpmc_nand_init(&board_nand_data, gpmc_t); } #endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */ diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c index 8897ad7035f..cb7764314f1 100644 --- a/arch/arm/mach-omap2/gpmc-nand.c +++ b/arch/arm/mach-omap2/gpmc-nand.c @@ -49,7 +49,8 @@ static bool gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt) return 0; /* legacy platforms support only HAM1 (1-bit Hamming) ECC scheme */ - if (ecc_opt == OMAP_ECC_HAM1_CODE_HW) + if (ecc_opt == OMAP_ECC_HAM1_CODE_HW || + ecc_opt == OMAP_ECC_HAM1_CODE_SW) return 1; else return 0; diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 8bc13380f0a..9f42d5437fc 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -1403,8 +1403,11 @@ static int gpmc_probe_nand_child(struct platform_device *pdev, pr_err("%s: ti,nand-ecc-opt not found\n", __func__); return -ENODEV; } - if (!strcmp(s, "ham1") || !strcmp(s, "sw") || - !strcmp(s, "hw") || !strcmp(s, "hw-romcode")) + + if (!strcmp(s, "sw")) + gpmc_nand_data->ecc_opt = OMAP_ECC_HAM1_CODE_SW; + else if (!strcmp(s, "ham1") || + !strcmp(s, "hw") || !strcmp(s, "hw-romcode")) gpmc_nand_data->ecc_opt = OMAP_ECC_HAM1_CODE_HW; else if (!strcmp(s, "bch4")) diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index d42022f2a71..53841dea80e 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -663,7 +663,7 @@ void __init dra7xxx_check_revision(void) default: /* Unknown default to latest silicon rev as default*/ - pr_warn("%s: unknown idcode=0x%08x (hawkeye=0x%08x,rev=0x%d)\n", + pr_warn("%s: unknown idcode=0x%08x (hawkeye=0x%08x,rev=0x%x)\n", __func__, idcode, hawkeye, rev); omap_revision = DRA752_REV_ES1_1; } diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c index 01ef59def44..d22c30d3ccf 100644 --- a/arch/arm/mach-omap2/omap_device.c +++ b/arch/arm/mach-omap2/omap_device.c @@ -56,7 +56,7 @@ static void _add_clkdev(struct omap_device *od, const char *clk_alias, r = clk_get_sys(dev_name(&od->pdev->dev), clk_alias); if (!IS_ERR(r)) { - dev_warn(&od->pdev->dev, + dev_dbg(&od->pdev->dev, "alias %s already exists\n", clk_alias); clk_put(r); return; diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 6c074f37cdd..8fd87a3055b 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -2185,6 +2185,8 @@ static int _enable(struct omap_hwmod *oh) oh->mux->pads_dynamic))) { omap_hwmod_mux(oh->mux, _HWMOD_STATE_ENABLED); _reconfigure_io_chain(); + } else if (oh->flags & HWMOD_FORCE_MSTANDBY) { + _reconfigure_io_chain(); } _add_initiator_dep(oh, mpu_oh); @@ -2291,6 +2293,8 @@ static int _idle(struct omap_hwmod *oh) if (oh->mux && oh->mux->pads_dynamic) { omap_hwmod_mux(oh->mux, _HWMOD_STATE_IDLE); _reconfigure_io_chain(); + } else if (oh->flags & HWMOD_FORCE_MSTANDBY) { + _reconfigure_io_chain(); } oh->_state = _HWMOD_STATE_IDLE; @@ -3345,6 +3349,9 @@ int __init omap_hwmod_register_links(struct omap_hwmod_ocp_if **ois) if (!ois) return 0; + if (ois[0] == NULL) /* Empty list */ + return 0; + if (!linkspace) { if (_alloc_linkspace(ois)) { pr_err("omap_hwmod: could not allocate link space\n"); diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c index 2757abf87fb..5684f112654 100644 --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c @@ -35,6 +35,7 @@ #include "i2c.h" #include "mmc.h" #include "wd_timer.h" +#include "soc.h" /* Base offset for all DRA7XX interrupts external to MPUSS */ #define DRA7XX_IRQ_GIC_START 32 @@ -3261,7 +3262,6 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = { &dra7xx_l4_per3__usb_otg_ss1, &dra7xx_l4_per3__usb_otg_ss2, &dra7xx_l4_per3__usb_otg_ss3, - &dra7xx_l4_per3__usb_otg_ss4, &dra7xx_l3_main_1__vcp1, &dra7xx_l4_per2__vcp1, &dra7xx_l3_main_1__vcp2, @@ -3270,8 +3270,26 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = { NULL, }; +static struct omap_hwmod_ocp_if *dra74x_hwmod_ocp_ifs[] __initdata = { + &dra7xx_l4_per3__usb_otg_ss4, + NULL, +}; + +static struct omap_hwmod_ocp_if *dra72x_hwmod_ocp_ifs[] __initdata = { + NULL, +}; + int __init dra7xx_hwmod_init(void) { + int ret; + omap_hwmod_init(); - return omap_hwmod_register_links(dra7xx_hwmod_ocp_ifs); + ret = omap_hwmod_register_links(dra7xx_hwmod_ocp_ifs); + + if (!ret && soc_is_dra74x()) + return omap_hwmod_register_links(dra74x_hwmod_ocp_ifs); + else if (!ret && soc_is_dra72x()) + return omap_hwmod_register_links(dra72x_hwmod_ocp_ifs); + + return ret; } diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h index 01ca8086fb6..4376f59626d 100644 --- a/arch/arm/mach-omap2/soc.h +++ b/arch/arm/mach-omap2/soc.h @@ -245,6 +245,8 @@ IS_AM_SUBCLASS(437x, 0x437) #define soc_is_omap54xx() 0 #define soc_is_omap543x() 0 #define soc_is_dra7xx() 0 +#define soc_is_dra74x() 0 +#define soc_is_dra72x() 0 #if defined(MULTI_OMAP2) # if defined(CONFIG_ARCH_OMAP2) @@ -393,7 +395,11 @@ IS_OMAP_TYPE(3430, 0x3430) #if defined(CONFIG_SOC_DRA7XX) #undef soc_is_dra7xx +#undef soc_is_dra74x +#undef soc_is_dra72x #define soc_is_dra7xx() (of_machine_is_compatible("ti,dra7")) +#define soc_is_dra74x() (of_machine_is_compatible("ti,dra74")) +#define soc_is_dra72x() (of_machine_is_compatible("ti,dra72")) #endif /* Various silicon revisions for omap2 */ diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index e15dff790db..1e6c51c7c2d 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -75,6 +75,7 @@ config ARCH_SH7372 select ARM_CPU_SUSPEND if PM || CPU_IDLE select CPU_V7 select SH_CLK_CPG + select SH_INTC select SYS_SUPPORTS_SH_CMT select SYS_SUPPORTS_SH_TMU @@ -85,6 +86,7 @@ config ARCH_SH73A0 select CPU_V7 select I2C select SH_CLK_CPG + select SH_INTC select RENESAS_INTC_IRQPIN select SYS_SUPPORTS_SH_CMT select SYS_SUPPORTS_SH_TMU diff --git a/arch/arm/mach-shmobile/clock-r8a7790.c b/arch/arm/mach-shmobile/clock-r8a7790.c index 17435c1aa2f..126ddafad52 100644 --- a/arch/arm/mach-shmobile/clock-r8a7790.c +++ b/arch/arm/mach-shmobile/clock-r8a7790.c @@ -183,8 +183,8 @@ enum { static struct clk div4_clks[DIV4_NR] = { [DIV4_SDH] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 8, 0x0dff, CLK_ENABLE_ON_INIT), - [DIV4_SD0] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 4, 0x1de0, CLK_ENABLE_ON_INIT), - [DIV4_SD1] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 0, 0x1de0, CLK_ENABLE_ON_INIT), + [DIV4_SD0] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 4, 0x1df0, CLK_ENABLE_ON_INIT), + [DIV4_SD1] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 0, 0x1df0, CLK_ENABLE_ON_INIT), }; /* DIV6 clocks */ diff --git a/arch/arm/mach-shmobile/clock-r8a7791.c b/arch/arm/mach-shmobile/clock-r8a7791.c index 10e193d707f..453b23129cf 100644 --- a/arch/arm/mach-shmobile/clock-r8a7791.c +++ b/arch/arm/mach-shmobile/clock-r8a7791.c @@ -152,7 +152,7 @@ enum { static struct clk div4_clks[DIV4_NR] = { [DIV4_SDH] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 8, 0x0dff, CLK_ENABLE_ON_INIT), - [DIV4_SD0] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 4, 0x1de0, CLK_ENABLE_ON_INIT), + [DIV4_SD0] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 4, 0x1df0, CLK_ENABLE_ON_INIT), }; /* DIV6 clocks */ diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c index d8c4048b9e3..02a6f45a0b9 100644 --- a/arch/arm/mach-shmobile/clock-sh73a0.c +++ b/arch/arm/mach-shmobile/clock-sh73a0.c @@ -644,7 +644,7 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */ CLKDEV_DEV_ID("e6cb0000.serial", &mstp_clks[MSTP207]), /* SCIFA5 */ CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP206]), /* SCIFB */ - CLKDEV_DEV_ID("0xe6c3000.serial", &mstp_clks[MSTP206]), /* SCIFB */ + CLKDEV_DEV_ID("e6c3000.serial", &mstp_clks[MSTP206]), /* SCIFB */ CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */ CLKDEV_DEV_ID("e6c40000.serial", &mstp_clks[MSTP204]), /* SCIFA0 */ CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]), /* SCIFA1 */ diff --git a/arch/arm/mach-vexpress/spc.c b/arch/arm/mach-vexpress/spc.c index 2c2754e79cb..f61158c6ce7 100644 --- a/arch/arm/mach-vexpress/spc.c +++ b/arch/arm/mach-vexpress/spc.c @@ -426,9 +426,15 @@ static int ve_spc_populate_opps(uint32_t cluster) static int ve_init_opp_table(struct device *cpu_dev) { - int cluster = topology_physical_package_id(cpu_dev->id); - int idx, ret = 0, max_opp = info->num_opps[cluster]; - struct ve_spc_opp *opps = info->opps[cluster]; + int cluster; + int idx, ret = 0, max_opp; + struct ve_spc_opp *opps; + + cluster = topology_physical_package_id(cpu_dev->id); + cluster = cluster < 0 ? 0 : cluster; + + max_opp = info->num_opps[cluster]; + opps = info->opps[cluster]; for (idx = 0; idx < max_opp; idx++, opps++) { ret = dev_pm_opp_add(cpu_dev, opps->freq * 1000, opps->u_volt); @@ -537,6 +543,8 @@ static struct clk *ve_spc_clk_register(struct device *cpu_dev) spc->hw.init = &init; spc->cluster = topology_physical_package_id(cpu_dev->id); + spc->cluster = spc->cluster < 0 ? 0 : spc->cluster; + init.name = dev_name(cpu_dev); init.ops = &clk_spc_ops; init.flags = CLK_IS_ROOT | CLK_GET_RATE_NOCACHE; diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile index 57833546bf0..2df5e5daeeb 100644 --- a/arch/arm64/Makefile +++ b/arch/arm64/Makefile @@ -39,7 +39,7 @@ head-y := arch/arm64/kernel/head.o # The byte offset of the kernel image in RAM from the start of RAM. ifeq ($(CONFIG_ARM64_RANDOMIZE_TEXT_OFFSET), y) -TEXT_OFFSET := $(shell awk 'BEGIN {srand(); printf "0x%04x0\n", int(65535 * rand())}') +TEXT_OFFSET := $(shell awk 'BEGIN {srand(); printf "0x%03x000\n", int(512 * rand())}') else TEXT_OFFSET := 0x00080000 endif diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 1e52b741d80..d92ef3c5416 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -64,6 +64,8 @@ CONFIG_VIRTIO_BLK=y CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_LOWLEVEL is not set CONFIG_ATA=y +CONFIG_AHCI_XGENE=y +CONFIG_PHY_XGENE=y CONFIG_PATA_PLATFORM=y CONFIG_PATA_OF_PLATFORM=y CONFIG_NETDEVICES=y @@ -71,6 +73,7 @@ CONFIG_TUN=y CONFIG_VIRTIO_NET=y CONFIG_SMC91X=y CONFIG_SMSC911X=y +CONFIG_NET_XGENE=y # CONFIG_WLAN is not set CONFIG_INPUT_EVDEV=y # CONFIG_SERIO_SERPORT is not set diff --git a/arch/arm64/include/asm/sparsemem.h b/arch/arm64/include/asm/sparsemem.h index 1be62bcb9d4..74a9d301819 100644 --- a/arch/arm64/include/asm/sparsemem.h +++ b/arch/arm64/include/asm/sparsemem.h @@ -17,7 +17,7 @@ #define __ASM_SPARSEMEM_H #ifdef CONFIG_SPARSEMEM -#define MAX_PHYSMEM_BITS 40 +#define MAX_PHYSMEM_BITS 48 #define SECTION_SIZE_BITS 30 #endif diff --git a/arch/arm64/include/asm/unistd.h b/arch/arm64/include/asm/unistd.h index 4bc95d27e06..6d2bf419431 100644 --- a/arch/arm64/include/asm/unistd.h +++ b/arch/arm64/include/asm/unistd.h @@ -41,7 +41,7 @@ #define __ARM_NR_compat_cacheflush (__ARM_NR_COMPAT_BASE+2) #define __ARM_NR_compat_set_tls (__ARM_NR_COMPAT_BASE+5) -#define __NR_compat_syscalls 383 +#define __NR_compat_syscalls 386 #endif #define __ARCH_WANT_SYS_CLONE diff --git a/arch/arm64/include/asm/unistd32.h b/arch/arm64/include/asm/unistd32.h index e242600c404..da1f06b535e 100644 --- a/arch/arm64/include/asm/unistd32.h +++ b/arch/arm64/include/asm/unistd32.h @@ -787,3 +787,8 @@ __SYSCALL(__NR_sched_setattr, sys_sched_setattr) __SYSCALL(__NR_sched_getattr, sys_sched_getattr) #define __NR_renameat2 382 __SYSCALL(__NR_renameat2, sys_renameat2) + /* 383 for seccomp */ +#define __NR_getrandom 384 +__SYSCALL(__NR_getrandom, sys_getrandom) +#define __NR_memfd_create 385 +__SYSCALL(__NR_memfd_create, sys_memfd_create) diff --git a/arch/arm64/kernel/cpuinfo.c b/arch/arm64/kernel/cpuinfo.c index f798f66634a..17716962302 100644 --- a/arch/arm64/kernel/cpuinfo.c +++ b/arch/arm64/kernel/cpuinfo.c @@ -49,7 +49,7 @@ static void cpuinfo_detect_icache_policy(struct cpuinfo_arm64 *info) if (l1ip != ICACHE_POLICY_PIPT) set_bit(ICACHEF_ALIASING, &__icache_flags); - if (l1ip == ICACHE_POLICY_AIVIVT); + if (l1ip == ICACHE_POLICY_AIVIVT) set_bit(ICACHEF_AIVIVT, &__icache_flags); pr_info("Detected %s I-cache on CPU%d\n", icache_policy_str[l1ip], cpu); diff --git a/arch/arm64/kernel/efi.c b/arch/arm64/kernel/efi.c index e72f3100958..03aaa99e1ea 100644 --- a/arch/arm64/kernel/efi.c +++ b/arch/arm64/kernel/efi.c @@ -188,6 +188,8 @@ static __init void reserve_regions(void) if (uefi_debug) pr_cont("\n"); } + + set_bit(EFI_MEMMAP, &efi.flags); } @@ -463,6 +465,8 @@ static int __init arm64_enter_virtual_mode(void) efi_native_runtime_setup(); set_bit(EFI_RUNTIME_SERVICES, &efi.flags); + efi.runtime_version = efi.systab->hdr.revision; + return 0; err_unmap: diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S index 144f10567f8..bed028364a9 100644 --- a/arch/arm64/kernel/head.S +++ b/arch/arm64/kernel/head.S @@ -38,11 +38,11 @@ #define KERNEL_RAM_VADDR (PAGE_OFFSET + TEXT_OFFSET) -#if (TEXT_OFFSET & 0xf) != 0 -#error TEXT_OFFSET must be at least 16B aligned -#elif (PAGE_OFFSET & 0xfffff) != 0 +#if (TEXT_OFFSET & 0xfff) != 0 +#error TEXT_OFFSET must be at least 4KB aligned +#elif (PAGE_OFFSET & 0x1fffff) != 0 #error PAGE_OFFSET must be at least 2MB aligned -#elif TEXT_OFFSET > 0xfffff +#elif TEXT_OFFSET > 0x1fffff #error TEXT_OFFSET must be less than 2MB #endif diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c index 0310811bd77..70526cfda05 100644 --- a/arch/arm64/kernel/ptrace.c +++ b/arch/arm64/kernel/ptrace.c @@ -1115,19 +1115,15 @@ asmlinkage int syscall_trace_enter(struct pt_regs *regs) if (test_thread_flag(TIF_SYSCALL_TRACEPOINT)) trace_sys_enter(regs, regs->syscallno); -#ifdef CONFIG_AUDITSYSCALL audit_syscall_entry(syscall_get_arch(), regs->syscallno, regs->orig_x0, regs->regs[1], regs->regs[2], regs->regs[3]); -#endif return regs->syscallno; } asmlinkage void syscall_trace_exit(struct pt_regs *regs) { -#ifdef CONFIG_AUDITSYSCALL audit_syscall_exit(regs); -#endif if (test_thread_flag(TIF_SYSCALL_TRACEPOINT)) trace_sys_exit(regs, regs_return_value(regs)); diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c index 5b4526ee3a0..5472c240187 100644 --- a/arch/arm64/mm/init.c +++ b/arch/arm64/mm/init.c @@ -32,6 +32,7 @@ #include <linux/of_fdt.h> #include <linux/dma-mapping.h> #include <linux/dma-contiguous.h> +#include <linux/efi.h> #include <asm/fixmap.h> #include <asm/sections.h> @@ -148,7 +149,8 @@ void __init arm64_memblock_init(void) memblock_reserve(__virt_to_phys(initrd_start), initrd_end - initrd_start); #endif - early_init_fdt_scan_reserved_mem(); + if (!efi_enabled(EFI_MEMMAP)) + early_init_fdt_scan_reserved_mem(); /* 4GB maximum for 32-bit only capable devices */ if (IS_ENABLED(CONFIG_ZONE_DMA)) diff --git a/arch/frv/include/asm/processor.h b/arch/frv/include/asm/processor.h index a34f309e580..6554e78893f 100644 --- a/arch/frv/include/asm/processor.h +++ b/arch/frv/include/asm/processor.h @@ -129,7 +129,8 @@ unsigned long get_wchan(struct task_struct *p); #define KSTK_EIP(tsk) ((tsk)->thread.frame0->pc) #define KSTK_ESP(tsk) ((tsk)->thread.frame0->sp) -#define cpu_relax() barrier() +#define cpu_relax() barrier() +#define cpu_relax_lowlatency() cpu_relax() /* data cache prefetch */ #define ARCH_HAS_PREFETCH diff --git a/arch/ia64/include/asm/unistd.h b/arch/ia64/include/asm/unistd.h index 4254f5d3218..10a14ead70b 100644 --- a/arch/ia64/include/asm/unistd.h +++ b/arch/ia64/include/asm/unistd.h @@ -11,7 +11,7 @@ -#define NR_syscalls 316 /* length of syscall table */ +#define NR_syscalls 317 /* length of syscall table */ /* * The following defines stop scripts/checksyscalls.sh from complaining about diff --git a/arch/ia64/include/uapi/asm/unistd.h b/arch/ia64/include/uapi/asm/unistd.h index 99801c3be91..6a65bb7d065 100644 --- a/arch/ia64/include/uapi/asm/unistd.h +++ b/arch/ia64/include/uapi/asm/unistd.h @@ -329,5 +329,6 @@ #define __NR_sched_getattr 1337 #define __NR_renameat2 1338 #define __NR_getrandom 1339 +#define __NR_memfd_create 1339 #endif /* _UAPI_ASM_IA64_UNISTD_H */ diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S index 4c13837a926..01edf242eb2 100644 --- a/arch/ia64/kernel/entry.S +++ b/arch/ia64/kernel/entry.S @@ -1777,6 +1777,7 @@ sys_call_table: data8 sys_sched_getattr data8 sys_renameat2 data8 sys_getrandom + data8 sys_memfd_create // 1340 .org sys_call_table + 8*NR_syscalls // guard against failures to increase NR_syscalls #endif /* __IA64_ASM_PARAVIRTUALIZED_NATIVE */ diff --git a/arch/microblaze/include/uapi/asm/unistd.h b/arch/microblaze/include/uapi/asm/unistd.h index 4e1ddc930a6..1c2380bf8fe 100644 --- a/arch/microblaze/include/uapi/asm/unistd.h +++ b/arch/microblaze/include/uapi/asm/unistd.h @@ -399,5 +399,8 @@ #define __NR_sched_setattr 381 #define __NR_sched_getattr 382 #define __NR_renameat2 383 +#define __NR_seccomp 384 +#define __NR_getrandom 385 +#define __NR_memfd_create 386 #endif /* _UAPI_ASM_MICROBLAZE_UNISTD_H */ diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S index 1a23d5d5480..de59ee1d701 100644 --- a/arch/microblaze/kernel/syscall_table.S +++ b/arch/microblaze/kernel/syscall_table.S @@ -384,3 +384,6 @@ ENTRY(sys_call_table) .long sys_sched_setattr .long sys_sched_getattr .long sys_renameat2 + .long sys_seccomp + .long sys_getrandom /* 385 */ + .long sys_memfd_create diff --git a/arch/mips/alchemy/devboards/db1200.c b/arch/mips/alchemy/devboards/db1200.c index 776188908df..8c13675a12e 100644 --- a/arch/mips/alchemy/devboards/db1200.c +++ b/arch/mips/alchemy/devboards/db1200.c @@ -847,6 +847,7 @@ int __init db1200_dev_setup(void) pr_warn("DB1200: cant get I2C close to 50MHz\n"); else clk_set_rate(c, pfc); + clk_prepare_enable(c); clk_put(c); } @@ -922,11 +923,6 @@ int __init db1200_dev_setup(void) } /* Audio PSC clock is supplied externally. (FIXME: platdata!!) */ - c = clk_get(NULL, "psc1_intclk"); - if (!IS_ERR(c)) { - clk_prepare_enable(c); - clk_put(c); - } __raw_writel(PSC_SEL_CLK_SERCLK, (void __iomem *)KSEG1ADDR(AU1550_PSC1_PHYS_ADDR) + PSC_SEL_OFFSET); wmb(); diff --git a/arch/mips/bcm47xx/setup.c b/arch/mips/bcm47xx/setup.c index 2b63e7e7d3d..ad439c27300 100644 --- a/arch/mips/bcm47xx/setup.c +++ b/arch/mips/bcm47xx/setup.c @@ -59,12 +59,21 @@ static void bcm47xx_machine_restart(char *command) switch (bcm47xx_bus_type) { #ifdef CONFIG_BCM47XX_SSB case BCM47XX_BUS_TYPE_SSB: - ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 3); + if (bcm47xx_bus.ssb.chip_id == 0x4785) + write_c0_diag4(1 << 22); + ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 1); + if (bcm47xx_bus.ssb.chip_id == 0x4785) { + __asm__ __volatile__( + ".set\tmips3\n\t" + "sync\n\t" + "wait\n\t" + ".set\tmips0"); + } break; #endif #ifdef CONFIG_BCM47XX_BCMA case BCM47XX_BUS_TYPE_BCMA: - bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc, 3); + bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc, 1); break; #endif } diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c index 008e9c8b8ea..38f4c32e281 100644 --- a/arch/mips/cavium-octeon/setup.c +++ b/arch/mips/cavium-octeon/setup.c @@ -263,7 +263,6 @@ static uint64_t crashk_size, crashk_base; static int octeon_uart; extern asmlinkage void handle_int(void); -extern asmlinkage void plat_irq_dispatch(void); /** * Return non zero if we are currently running in the Octeon simulator @@ -458,6 +457,18 @@ static void octeon_halt(void) octeon_kill_core(NULL); } +static char __read_mostly octeon_system_type[80]; + +static int __init init_octeon_system_type(void) +{ + snprintf(octeon_system_type, sizeof(octeon_system_type), "%s (%s)", + cvmx_board_type_to_string(octeon_bootinfo->board_type), + octeon_model_get_string(read_c0_prid())); + + return 0; +} +early_initcall(init_octeon_system_type); + /** * Return a string representing the system type * @@ -465,11 +476,7 @@ static void octeon_halt(void) */ const char *octeon_board_type_string(void) { - static char name[80]; - sprintf(name, "%s (%s)", - cvmx_board_type_to_string(octeon_bootinfo->board_type), - octeon_model_get_string(read_c0_prid())); - return name; + return octeon_system_type; } const char *get_system_type(void) diff --git a/arch/mips/include/asm/eva.h b/arch/mips/include/asm/eva.h new file mode 100644 index 00000000000..a3d1807f227 --- /dev/null +++ b/arch/mips/include/asm/eva.h @@ -0,0 +1,43 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2014, Imagination Technologies Ltd. + * + * EVA functions for generic code + */ + +#ifndef _ASM_EVA_H +#define _ASM_EVA_H + +#include <kernel-entry-init.h> + +#ifdef __ASSEMBLY__ + +#ifdef CONFIG_EVA + +/* + * EVA early init code + * + * Platforms must define their own 'platform_eva_init' macro in + * their kernel-entry-init.h header. This macro usually does the + * platform specific configuration of the segmentation registers, + * and it is normally called from assembly code. + * + */ + +.macro eva_init +platform_eva_init +.endm + +#else + +.macro eva_init +.endm + +#endif /* CONFIG_EVA */ + +#endif /* __ASSEMBLY__ */ + +#endif diff --git a/arch/mips/include/asm/gic.h b/arch/mips/include/asm/gic.h index 3f20b2111d5..d7699cf7e13 100644 --- a/arch/mips/include/asm/gic.h +++ b/arch/mips/include/asm/gic.h @@ -49,7 +49,7 @@ #endif #define GICBIS(reg, mask, bits) \ do { u32 data; \ - GICREAD((reg), data); \ + GICREAD(reg, data); \ data &= ~(mask); \ data |= ((bits) & (mask)); \ GICWRITE((reg), data); \ diff --git a/arch/mips/include/asm/irq.h b/arch/mips/include/asm/irq.h index ae1f7b24dd1..39f07aec640 100644 --- a/arch/mips/include/asm/irq.h +++ b/arch/mips/include/asm/irq.h @@ -26,6 +26,8 @@ static inline int irq_canonicalize(int irq) #define irq_canonicalize(irq) (irq) /* Sane hardware, sane code ... */ #endif +asmlinkage void plat_irq_dispatch(void); + extern void do_IRQ(unsigned int irq); extern void arch_init_irq(void); diff --git a/arch/mips/include/asm/mach-malta/kernel-entry-init.h b/arch/mips/include/asm/mach-malta/kernel-entry-init.h index 77eeda77e73..0cf8622db27 100644 --- a/arch/mips/include/asm/mach-malta/kernel-entry-init.h +++ b/arch/mips/include/asm/mach-malta/kernel-entry-init.h @@ -10,14 +10,15 @@ #ifndef __ASM_MACH_MIPS_KERNEL_ENTRY_INIT_H #define __ASM_MACH_MIPS_KERNEL_ENTRY_INIT_H +#include <asm/regdef.h> +#include <asm/mipsregs.h> + /* * Prepare segments for EVA boot: * * This is in case the processor boots in legacy configuration * (SI_EVAReset is de-asserted and CONFIG5.K == 0) * - * On entry, t1 is loaded with CP0_CONFIG - * * ========================= Mappings ============================= * Virtual memory Physical memory Mapping * 0x00000000 - 0x7fffffff 0x80000000 - 0xfffffffff MUSUK (kuseg) @@ -30,12 +31,20 @@ * * * Lowmem is expanded to 2GB + * + * The following code uses the t0, t1, t2 and ra registers without + * previously preserving them. + * */ - .macro eva_entry + .macro platform_eva_init + + .set push + .set reorder /* * Get Config.K0 value and use it to program * the segmentation registers */ + mfc0 t1, CP0_CONFIG andi t1, 0x7 /* CCA */ move t2, t1 ins t2, t1, 16, 3 @@ -77,6 +86,8 @@ mtc0 t0, $16, 5 sync jal mips_ihb + + .set pop .endm .macro kernel_entry_setup @@ -95,7 +106,7 @@ sll t0, t0, 6 /* SC bit */ bgez t0, 9f - eva_entry + platform_eva_init b 0f 9: /* Assume we came from YAMON... */ @@ -127,8 +138,7 @@ nonsc_processor: #ifdef CONFIG_EVA sync ehb - mfc0 t1, CP0_CONFIG - eva_entry + platform_eva_init #endif .endm diff --git a/arch/mips/include/asm/mach-netlogic/topology.h b/arch/mips/include/asm/mach-netlogic/topology.h index ceeb1f5e712..0eb43c832b2 100644 --- a/arch/mips/include/asm/mach-netlogic/topology.h +++ b/arch/mips/include/asm/mach-netlogic/topology.h @@ -10,13 +10,6 @@ #include <asm/mach-netlogic/multi-node.h> -#ifdef CONFIG_SMP -#define topology_physical_package_id(cpu) cpu_to_node(cpu) -#define topology_core_id(cpu) (cpu_logical_map(cpu) / NLM_THREADS_PER_CORE) -#define topology_thread_cpumask(cpu) (&cpu_sibling_map[cpu]) -#define topology_core_cpumask(cpu) cpumask_of_node(cpu_to_node(cpu)) -#endif - #include <asm-generic/topology.h> #endif /* _ASM_MACH_NETLOGIC_TOPOLOGY_H */ diff --git a/arch/mips/include/asm/pgtable.h b/arch/mips/include/asm/pgtable.h index 027c74db13f..df49a308085 100644 --- a/arch/mips/include/asm/pgtable.h +++ b/arch/mips/include/asm/pgtable.h @@ -122,6 +122,9 @@ do { \ } \ } while(0) +extern void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, + pte_t pteval); + #if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) #define pte_none(pte) (!(((pte).pte_low | (pte).pte_high) & ~_PAGE_GLOBAL)) @@ -145,7 +148,6 @@ static inline void set_pte(pte_t *ptep, pte_t pte) } } } -#define set_pte_at(mm, addr, ptep, pteval) set_pte(ptep, pteval) static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) { @@ -183,7 +185,6 @@ static inline void set_pte(pte_t *ptep, pte_t pteval) } #endif } -#define set_pte_at(mm, addr, ptep, pteval) set_pte(ptep, pteval) static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) { @@ -390,15 +391,12 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) extern void __update_tlb(struct vm_area_struct *vma, unsigned long address, pte_t pte); -extern void __update_cache(struct vm_area_struct *vma, unsigned long address, - pte_t pte); static inline void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t *ptep) { pte_t pte = *ptep; __update_tlb(vma, address, pte); - __update_cache(vma, address, pte); } static inline void update_mmu_cache_pmd(struct vm_area_struct *vma, diff --git a/arch/mips/include/asm/syscall.h b/arch/mips/include/asm/syscall.h index 17960fe7a8c..cdf68b33bd6 100644 --- a/arch/mips/include/asm/syscall.h +++ b/arch/mips/include/asm/syscall.h @@ -131,10 +131,12 @@ static inline int syscall_get_arch(void) { int arch = EM_MIPS; #ifdef CONFIG_64BIT - if (!test_thread_flag(TIF_32BIT_REGS)) + if (!test_thread_flag(TIF_32BIT_REGS)) { arch |= __AUDIT_ARCH_64BIT; - if (test_thread_flag(TIF_32BIT_ADDR)) - arch |= __AUDIT_ARCH_CONVENTION_MIPS64_N32; + /* N32 sets only TIF_32BIT_ADDR */ + if (test_thread_flag(TIF_32BIT_ADDR)) + arch |= __AUDIT_ARCH_CONVENTION_MIPS64_N32; + } #endif #if defined(__LITTLE_ENDIAN) arch |= __AUDIT_ARCH_LE; diff --git a/arch/mips/kernel/cps-vec.S b/arch/mips/kernel/cps-vec.S index 6f4f739dad9..e6e97d2a5c9 100644 --- a/arch/mips/kernel/cps-vec.S +++ b/arch/mips/kernel/cps-vec.S @@ -13,6 +13,7 @@ #include <asm/asm-offsets.h> #include <asm/asmmacro.h> #include <asm/cacheops.h> +#include <asm/eva.h> #include <asm/mipsregs.h> #include <asm/mipsmtregs.h> #include <asm/pm.h> @@ -166,6 +167,9 @@ dcache_done: 1: jal mips_cps_core_init nop + /* Do any EVA initialization if necessary */ + eva_init + /* * Boot any other VPEs within this core that should be online, and * deactivate this VPE if it should be offline. diff --git a/arch/mips/kernel/perf_event_mipsxx.c b/arch/mips/kernel/perf_event_mipsxx.c index 14bf74b0f51..b63f2482f28 100644 --- a/arch/mips/kernel/perf_event_mipsxx.c +++ b/arch/mips/kernel/perf_event_mipsxx.c @@ -558,7 +558,7 @@ static int mipspmu_get_irq(void) if (mipspmu.irq >= 0) { /* Request my own irq handler. */ err = request_irq(mipspmu.irq, mipsxx_pmu_handle_irq, - IRQF_PERCPU | IRQF_NOBALANCING, + IRQF_PERCPU | IRQF_NOBALANCING | IRQF_NO_THREAD, "mips_perf_pmu", NULL); if (err) { pr_warning("Unable to request IRQ%d for MIPS " diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S index 13b964fddc4..25bb8400156 100644 --- a/arch/mips/kernel/scall64-o32.S +++ b/arch/mips/kernel/scall64-o32.S @@ -113,15 +113,19 @@ trace_a_syscall: move s0, t2 # Save syscall pointer move a0, sp /* - * syscall number is in v0 unless we called syscall(__NR_###) + * absolute syscall number is in v0 unless we called syscall(__NR_###) * where the real syscall number is in a0 * note: NR_syscall is the first O32 syscall but the macro is * only defined when compiling with -mabi=32 (CONFIG_32BIT) * therefore __NR_O32_Linux is used (4000) */ - addiu a1, v0, __NR_O32_Linux - bnez v0, 1f /* __NR_syscall at offset 0 */ - lw a1, PT_R4(sp) + .set push + .set reorder + subu t1, v0, __NR_O32_Linux + move a1, v0 + bnez t1, 1f /* __NR_syscall at offset 0 */ + lw a1, PT_R4(sp) /* Arg1 for __NR_syscall case */ + .set pop 1: jal syscall_trace_enter diff --git a/arch/mips/loongson/loongson-3/cop2-ex.c b/arch/mips/loongson/loongson-3/cop2-ex.c index 9182e8d2967..b03e37d2071 100644 --- a/arch/mips/loongson/loongson-3/cop2-ex.c +++ b/arch/mips/loongson/loongson-3/cop2-ex.c @@ -22,13 +22,13 @@ static int loongson_cu2_call(struct notifier_block *nfb, unsigned long action, void *data) { - int fpu_enabled; + int fpu_owned; int fr = !test_thread_flag(TIF_32BIT_FPREGS); switch (action) { case CU2_EXCEPTION: preempt_disable(); - fpu_enabled = read_c0_status() & ST0_CU1; + fpu_owned = __is_fpu_owner(); if (!fr) set_c0_status(ST0_CU1 | ST0_CU2); else @@ -39,8 +39,8 @@ static int loongson_cu2_call(struct notifier_block *nfb, unsigned long action, KSTK_STATUS(current) |= ST0_FR; else KSTK_STATUS(current) &= ~ST0_FR; - /* If FPU is enabled, we needn't init or restore fp */ - if(!fpu_enabled) { + /* If FPU is owned, we needn't init or restore fp */ + if (!fpu_owned) { set_thread_flag(TIF_USEDFPU); if (!used_math()) { _init_fpu(); diff --git a/arch/mips/loongson/loongson-3/numa.c b/arch/mips/loongson/loongson-3/numa.c index ca025a6ba55..37ed184398c 100644 --- a/arch/mips/loongson/loongson-3/numa.c +++ b/arch/mips/loongson/loongson-3/numa.c @@ -24,8 +24,6 @@ #include <asm/page.h> #include <asm/pgalloc.h> #include <asm/sections.h> -#include <linux/bootmem.h> -#include <linux/init.h> #include <linux/irq.h> #include <asm/bootinfo.h> #include <asm/mc146818-time.h> diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c index f7b91d3a371..7e3ea776682 100644 --- a/arch/mips/mm/cache.c +++ b/arch/mips/mm/cache.c @@ -119,25 +119,36 @@ void __flush_anon_page(struct page *page, unsigned long vmaddr) EXPORT_SYMBOL(__flush_anon_page); -void __update_cache(struct vm_area_struct *vma, unsigned long address, - pte_t pte) +static void mips_flush_dcache_from_pte(pte_t pteval, unsigned long address) { struct page *page; - unsigned long pfn, addr; - int exec = (vma->vm_flags & VM_EXEC) && !cpu_has_ic_fills_f_dc; + unsigned long pfn = pte_pfn(pteval); - pfn = pte_pfn(pte); if (unlikely(!pfn_valid(pfn))) return; + page = pfn_to_page(pfn); if (page_mapping(page) && Page_dcache_dirty(page)) { - addr = (unsigned long) page_address(page); - if (exec || pages_do_alias(addr, address & PAGE_MASK)) - flush_data_cache_page(addr); + unsigned long page_addr = (unsigned long) page_address(page); + + if (!cpu_has_ic_fills_f_dc || + pages_do_alias(page_addr, address & PAGE_MASK)) + flush_data_cache_page(page_addr); ClearPageDcacheDirty(page); } } +void set_pte_at(struct mm_struct *mm, unsigned long addr, + pte_t *ptep, pte_t pteval) +{ + if (cpu_has_dc_aliases || !cpu_has_ic_fills_f_dc) { + if (pte_present(pteval)) + mips_flush_dcache_from_pte(pteval, addr); + } + + set_pte(ptep, pteval); +} + unsigned long _page_cachable_default; EXPORT_SYMBOL(_page_cachable_default); diff --git a/arch/mips/mti-malta/malta-memory.c b/arch/mips/mti-malta/malta-memory.c index 0c35dee0a21..8fddd2cdbff 100644 --- a/arch/mips/mti-malta/malta-memory.c +++ b/arch/mips/mti-malta/malta-memory.c @@ -35,13 +35,19 @@ fw_memblock_t * __init fw_getmdesc(int eva) /* otherwise look in the environment */ memsize_str = fw_getenv("memsize"); - if (memsize_str) - tmp = kstrtol(memsize_str, 0, &memsize); + if (memsize_str) { + tmp = kstrtoul(memsize_str, 0, &memsize); + if (tmp) + pr_warn("Failed to read the 'memsize' env variable.\n"); + } if (eva) { /* Look for ememsize for EVA */ ememsize_str = fw_getenv("ememsize"); - if (ememsize_str) - tmp = kstrtol(ememsize_str, 0, &ememsize); + if (ememsize_str) { + tmp = kstrtoul(ememsize_str, 0, &ememsize); + if (tmp) + pr_warn("Failed to read the 'ememsize' env variable.\n"); + } } if (!memsize && !ememsize) { pr_warn("memsize not set in YAMON, set to default (32Mb)\n"); diff --git a/arch/mips/pmcs-msp71xx/msp_irq.c b/arch/mips/pmcs-msp71xx/msp_irq.c index 941744aabb5..f914c753de2 100644 --- a/arch/mips/pmcs-msp71xx/msp_irq.c +++ b/arch/mips/pmcs-msp71xx/msp_irq.c @@ -51,7 +51,7 @@ static inline void sec_int_dispatch(void) { do_IRQ(MSP_INT_SEC); } * the range 40-71. */ -asmlinkage void plat_irq_dispatch(struct pt_regs *regs) +asmlinkage void plat_irq_dispatch(void) { u32 pending; diff --git a/arch/powerpc/kvm/book3s_hv_builtin.c b/arch/powerpc/kvm/book3s_hv_builtin.c index 329d7fdd0a6..b9615ba5b08 100644 --- a/arch/powerpc/kvm/book3s_hv_builtin.c +++ b/arch/powerpc/kvm/book3s_hv_builtin.c @@ -101,7 +101,7 @@ struct kvm_rma_info *kvm_alloc_rma() ri = kmalloc(sizeof(struct kvm_rma_info), GFP_KERNEL); if (!ri) return NULL; - page = cma_alloc(kvm_cma, kvm_rma_pages, get_order(kvm_rma_pages)); + page = cma_alloc(kvm_cma, kvm_rma_pages, order_base_2(kvm_rma_pages)); if (!page) goto err_out; atomic_set(&ri->use_count, 1); @@ -135,12 +135,12 @@ struct page *kvm_alloc_hpt(unsigned long nr_pages) { unsigned long align_pages = HPT_ALIGN_PAGES; - VM_BUG_ON(get_order(nr_pages) < KVM_CMA_CHUNK_ORDER - PAGE_SHIFT); + VM_BUG_ON(order_base_2(nr_pages) < KVM_CMA_CHUNK_ORDER - PAGE_SHIFT); /* Old CPUs require HPT aligned on a multiple of its size */ if (!cpu_has_feature(CPU_FTR_ARCH_206)) align_pages = nr_pages; - return cma_alloc(kvm_cma, nr_pages, get_order(align_pages)); + return cma_alloc(kvm_cma, nr_pages, order_base_2(align_pages)); } EXPORT_SYMBOL_GPL(kvm_alloc_hpt); diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 453fa5c0955..b319846ad97 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -172,6 +172,7 @@ menu "System type" # config CPU_SH2 bool + select SH_INTC config CPU_SH2A bool @@ -182,6 +183,7 @@ config CPU_SH3 bool select CPU_HAS_INTEVT select CPU_HAS_SR_RB + select SH_INTC select SYS_SUPPORTS_SH_TMU config CPU_SH4 @@ -189,6 +191,7 @@ config CPU_SH4 select CPU_HAS_INTEVT select CPU_HAS_SR_RB select CPU_HAS_FPU if !CPU_SH4AL_DSP + select SH_INTC select SYS_SUPPORTS_SH_TMU select SYS_SUPPORTS_HUGETLBFS if MMU diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h index 572460175ba..7c492ed9087 100644 --- a/arch/x86/include/asm/kvm_host.h +++ b/arch/x86/include/asm/kvm_host.h @@ -95,7 +95,7 @@ static inline gfn_t gfn_to_index(gfn_t gfn, gfn_t base_gfn, int level) #define KVM_REFILL_PAGES 25 #define KVM_MAX_CPUID_ENTRIES 80 #define KVM_NR_FIXED_MTRR_REGION 88 -#define KVM_NR_VAR_MTRR 10 +#define KVM_NR_VAR_MTRR 8 #define ASYNC_PF_PER_VCPU 64 diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S index 47c410d99f5..4b0e1dfa222 100644 --- a/arch/x86/kernel/entry_32.S +++ b/arch/x86/kernel/entry_32.S @@ -683,7 +683,7 @@ END(syscall_badsys) sysenter_badsys: movl $-ENOSYS,%eax jmp sysenter_after_call -END(syscall_badsys) +END(sysenter_badsys) CFI_ENDPROC .macro FIXUP_ESPFIX_STACK diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c index 56657b0bb3b..03954f7900f 100644 --- a/arch/x86/kvm/emulate.c +++ b/arch/x86/kvm/emulate.c @@ -1491,9 +1491,6 @@ static int __load_segment_descriptor(struct x86_emulate_ctxt *ctxt, goto exception; break; case VCPU_SREG_CS: - if (in_task_switch && rpl != dpl) - goto exception; - if (!(seg_desc.type & 8)) goto exception; @@ -4394,8 +4391,11 @@ done_prefixes: ctxt->execute = opcode.u.execute; + if (unlikely(ctxt->ud) && likely(!(ctxt->d & EmulateOnUD))) + return EMULATION_FAILED; + if (unlikely(ctxt->d & - (NotImpl|EmulateOnUD|Stack|Op3264|Sse|Mmx|Intercept|CheckPerm))) { + (NotImpl|Stack|Op3264|Sse|Mmx|Intercept|CheckPerm))) { /* * These are copied unconditionally here, and checked unconditionally * in x86_emulate_insn. @@ -4406,9 +4406,6 @@ done_prefixes: if (ctxt->d & NotImpl) return EMULATION_FAILED; - if (!(ctxt->d & EmulateOnUD) && ctxt->ud) - return EMULATION_FAILED; - if (mode == X86EMUL_MODE_PROT64 && (ctxt->d & Stack)) ctxt->op_bytes = 8; diff --git a/arch/x86/mm/tlb.c b/arch/x86/mm/tlb.c index 1fe33987de0..ee61c36d64f 100644 --- a/arch/x86/mm/tlb.c +++ b/arch/x86/mm/tlb.c @@ -49,7 +49,13 @@ void leave_mm(int cpu) if (cpumask_test_cpu(cpu, mm_cpumask(active_mm))) { cpumask_clear_cpu(cpu, mm_cpumask(active_mm)); load_cr3(swapper_pg_dir); - trace_tlb_flush(TLB_FLUSH_ON_TASK_SWITCH, TLB_FLUSH_ALL); + /* + * This gets called in the idle path where RCU + * functions differently. Tracing normally + * uses RCU, so we have to call the tracepoint + * specially here. + */ + trace_tlb_flush_rcuidle(TLB_FLUSH_ON_TASK_SWITCH, TLB_FLUSH_ALL); } } EXPORT_SYMBOL_GPL(leave_mm); @@ -174,7 +180,7 @@ void flush_tlb_current_task(void) * * This is in units of pages. */ -unsigned long tlb_single_page_flush_ceiling = 33; +static unsigned long tlb_single_page_flush_ceiling __read_mostly = 33; void flush_tlb_mm_range(struct mm_struct *mm, unsigned long start, unsigned long end, unsigned long vmflag) |