20 files changed, 789 insertions, 563 deletions

diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 5465f564fdf..056b27aafbe 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -186,13 +186,11 @@ CONFIG_OMAP2_DSS_RFBI=y
 CONFIG_OMAP2_DSS_SDI=y
 CONFIG_OMAP2_DSS_DSI=y
 CONFIG_FB_OMAP2=m
-CONFIG_PANEL_GENERIC_DPI=m
-CONFIG_PANEL_TFP410=m
-CONFIG_PANEL_SHARP_LS037V7DW01=m
-CONFIG_PANEL_NEC_NL8048HL11_01B=m
-CONFIG_PANEL_TAAL=m
-CONFIG_PANEL_TPO_TD043MTEA1=m
-CONFIG_PANEL_ACX565AKM=m
+CONFIG_DISPLAY_ENCODER_TFP410=m
+CONFIG_DISPLAY_ENCODER_TPD12S015=m
+CONFIG_DISPLAY_CONNECTOR_DVI=m
+CONFIG_DISPLAY_CONNECTOR_HDMI=m
+CONFIG_DISPLAY_PANEL_DPI=m
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_PLATFORM=y
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 244d8a5aa54..c711ad6ac06 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -100,39 +100,52 @@ static struct platform_device sdp2430_flash_device = {
 	.resource	= &sdp2430_flash_resource,
 };
 
-static struct platform_device *sdp2430_devices[] __initdata = {
-	&sdp2430_flash_device,
-};
-
 /* LCD */
 #define SDP2430_LCD_PANEL_BACKLIGHT_GPIO	91
 #define SDP2430_LCD_PANEL_ENABLE_GPIO		154
 
-static struct panel_generic_dpi_data sdp2430_panel_data = {
-	.name			= "nec_nl2432dr22-11b",
-	.num_gpios		= 2,
-	.gpios			= {
-		SDP2430_LCD_PANEL_ENABLE_GPIO,
-		SDP2430_LCD_PANEL_BACKLIGHT_GPIO,
-	},
+static const struct display_timing sdp2430_lcd_videomode = {
+	.pixelclock	= { 0, 5400000, 0 },
+
+	.hactive = { 0, 240, 0 },
+	.hfront_porch = { 0, 3, 0 },
+	.hback_porch = { 0, 39, 0 },
+	.hsync_len = { 0, 3, 0 },
+
+	.vactive = { 0, 320, 0 },
+	.vfront_porch = { 0, 2, 0 },
+	.vback_porch = { 0, 7, 0 },
+	.vsync_len = { 0, 1, 0 },
+
+	.flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
+		DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE,
 };
 
-static struct omap_dss_device sdp2430_lcd_device = {
-	.name			= "lcd",
-	.driver_name		= "generic_dpi_panel",
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.phy.dpi.data_lines	= 16,
-	.data			= &sdp2430_panel_data,
+static struct panel_dpi_platform_data sdp2430_lcd_pdata = {
+	.name                   = "lcd",
+	.source                 = "dpi.0",
+
+	.data_lines		= 16,
+
+	.display_timing		= &sdp2430_lcd_videomode,
+
+	.enable_gpio		= SDP2430_LCD_PANEL_ENABLE_GPIO,
+	.backlight_gpio		= SDP2430_LCD_PANEL_BACKLIGHT_GPIO,
 };
 
-static struct omap_dss_device *sdp2430_dss_devices[] = {
-	&sdp2430_lcd_device,
+static struct platform_device sdp2430_lcd_device = {
+	.name                   = "panel-dpi",
+	.id                     = 0,
+	.dev.platform_data      = &sdp2430_lcd_pdata,
 };
 
 static struct omap_dss_board_info sdp2430_dss_data = {
-	.num_devices	= ARRAY_SIZE(sdp2430_dss_devices),
-	.devices	= sdp2430_dss_devices,
-	.default_device	= &sdp2430_lcd_device,
+	.default_display_name = "lcd",
+};
+
+static struct platform_device *sdp2430_devices[] __initdata = {
+	&sdp2430_flash_device,
+	&sdp2430_lcd_device,
 };
 
 #if IS_ENABLED(CONFIG_SMC91X)
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 23b004afa3f..d95d0ef1354 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -126,53 +126,65 @@ static void __init sdp3430_display_init(void)
 
 }
 
-static struct panel_sharp_ls037v7dw01_data sdp3430_lcd_data = {
-	.resb_gpio = SDP3430_LCD_PANEL_ENABLE_GPIO,
-	.ini_gpio = -1,
-	.mo_gpio = -1,
-	.lr_gpio = -1,
-	.ud_gpio = -1,
+static struct panel_sharp_ls037v7dw01_platform_data sdp3430_lcd_pdata = {
+	.name                   = "lcd",
+	.source                 = "dpi.0",
+
+	.data_lines		= 16,
+
+	.resb_gpio		= SDP3430_LCD_PANEL_ENABLE_GPIO,
+	.ini_gpio		= -1,
+	.mo_gpio		= -1,
+	.lr_gpio		= -1,
+	.ud_gpio		= -1,
+};
+
+static struct platform_device sdp3430_lcd_device = {
+	.name                   = "panel-sharp-ls037v7dw01",
+	.id                     = 0,
+	.dev.platform_data      = &sdp3430_lcd_pdata,
 };
 
-static struct omap_dss_device sdp3430_lcd_device = {
-	.name			= "lcd",
-	.driver_name		= "sharp_ls_panel",
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.phy.dpi.data_lines	= 16,
-	.data			= &sdp3430_lcd_data,
+static struct connector_dvi_platform_data sdp3430_dvi_connector_pdata = {
+	.name                   = "dvi",
+	.source                 = "tfp410.0",
+	.i2c_bus_num            = -1,
 };
 
-static struct tfp410_platform_data dvi_panel = {
-	.power_down_gpio	= -1,
-	.i2c_bus_num		= -1,
+static struct platform_device sdp3430_dvi_connector_device = {
+	.name                   = "connector-dvi",
+	.id                     = 0,
+	.dev.platform_data      = &sdp3430_dvi_connector_pdata,
 };
 
-static struct omap_dss_device sdp3430_dvi_device = {
-	.name			= "dvi",
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.driver_name		= "tfp410",
-	.data			= &dvi_panel,
-	.phy.dpi.data_lines	= 24,
+static struct encoder_tfp410_platform_data sdp3430_tfp410_pdata = {
+	.name                   = "tfp410.0",
+	.source                 = "dpi.0",
+	.data_lines             = 24,
+	.power_down_gpio        = -1,
 };
 
-static struct omap_dss_device sdp3430_tv_device = {
-	.name			= "tv",
-	.driver_name		= "venc",
-	.type			= OMAP_DISPLAY_TYPE_VENC,
-	.phy.venc.type		= OMAP_DSS_VENC_TYPE_SVIDEO,
+static struct platform_device sdp3430_tfp410_device = {
+	.name                   = "tfp410",
+	.id                     = 0,
+	.dev.platform_data      = &sdp3430_tfp410_pdata,
 };
 
+static struct connector_atv_platform_data sdp3430_tv_pdata = {
+	.name = "tv",
+	.source = "venc.0",
+	.connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
+	.invert_polarity = false,
+};
 
-static struct omap_dss_device *sdp3430_dss_devices[] = {
-	&sdp3430_lcd_device,
-	&sdp3430_dvi_device,
-	&sdp3430_tv_device,
+static struct platform_device sdp3430_tv_connector_device = {
+	.name                   = "connector-analog-tv",
+	.id                     = 0,
+	.dev.platform_data      = &sdp3430_tv_pdata,
 };
 
 static struct omap_dss_board_info sdp3430_dss_data = {
-	.num_devices	= ARRAY_SIZE(sdp3430_dss_devices),
-	.devices	= sdp3430_dss_devices,
-	.default_device	= &sdp3430_lcd_device,
+	.default_display_name = "lcd",
 };
 
 static struct omap2_hsmmc_info mmc[] = {
@@ -583,6 +595,11 @@ static void __init omap_3430sdp_init(void)
 	omap_hsmmc_init(mmc);
 	omap3430_i2c_init();
 	omap_display_init(&sdp3430_dss_data);
+	platform_device_register(&sdp3430_lcd_device);
+	platform_device_register(&sdp3430_tfp410_device);
+	platform_device_register(&sdp3430_dvi_connector_device);
+	platform_device_register(&sdp3430_tv_connector_device);
+
 	if (omap_rev() > OMAP3430_REV_ES1_0)
 		gpio_pendown = SDP3430_TS_GPIO_IRQ_SDPV2;
 	else
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index d63f14b534b..8cc2c9e9fb0 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -120,56 +120,95 @@ static int __init am3517_evm_i2c_init(void)
 	return 0;
 }
 
-static struct panel_generic_dpi_data lcd_panel = {
-	.name			= "sharp_lq",
-	.num_gpios		= 3,
-	.gpios			= {
-		LCD_PANEL_PWR,
-		LCD_PANEL_BKLIGHT_PWR,
-		LCD_PANEL_PWM,
-	},
+static const struct display_timing am3517_evm_lcd_videomode = {
+	.pixelclock	= { 0, 9000000, 0 },
+
+	.hactive = { 0, 480, 0 },
+	.hfront_porch = { 0, 3, 0 },
+	.hback_porch = { 0, 2, 0 },
+	.hsync_len = { 0, 42, 0 },
+
+	.vactive = { 0, 272, 0 },
+	.vfront_porch = { 0, 3, 0 },
+	.vback_porch = { 0, 2, 0 },
+	.vsync_len = { 0, 11, 0 },
+
+	.flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
+		DISPLAY_FLAGS_DE_LOW | DISPLAY_FLAGS_PIXDATA_POSEDGE,
+};
+
+static struct panel_dpi_platform_data am3517_evm_lcd_pdata = {
+	.name                   = "lcd",
+	.source                 = "dpi.0",
+
+	.data_lines		= 16,
+
+	.display_timing		= &am3517_evm_lcd_videomode,
+
+	.enable_gpio		= LCD_PANEL_PWR,
+	.backlight_gpio		= LCD_PANEL_BKLIGHT_PWR,
+};
+
+static struct platform_device am3517_evm_lcd_device = {
+	.name                   = "panel-dpi",
+	.id                     = 0,
+	.dev.platform_data      = &am3517_evm_lcd_pdata,
 };
 
-static struct omap_dss_device am3517_evm_lcd_device = {
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.name			= "lcd",
-	.driver_name		= "generic_dpi_panel",
-	.data			= &lcd_panel,
-	.phy.dpi.data_lines 	= 16,
+static struct connector_dvi_platform_data am3517_evm_dvi_connector_pdata = {
+	.name                   = "dvi",
+	.source                 = "tfp410.0",
+	.i2c_bus_num            = -1,
 };
 
-static struct omap_dss_device am3517_evm_tv_device = {
-	.type 			= OMAP_DISPLAY_TYPE_VENC,
-	.name 			= "tv",
-	.driver_name		= "venc",
-	.phy.venc.type		= OMAP_DSS_VENC_TYPE_SVIDEO,
+static struct platform_device am3517_evm_dvi_connector_device = {
+	.name                   = "connector-dvi",
+	.id                     = 0,
+	.dev.platform_data      = &am3517_evm_dvi_connector_pdata,
 };
 
-static struct tfp410_platform_data dvi_panel = {
-	.power_down_gpio	= -1,
-	.i2c_bus_num		= -1,
+static struct encoder_tfp410_platform_data am3517_evm_tfp410_pdata = {
+	.name                   = "tfp410.0",
+	.source                 = "dpi.0",
+	.data_lines             = 24,
+	.power_down_gpio        = -1,
 };
 
-static struct omap_dss_device am3517_evm_dvi_device = {
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.name			= "dvi",
-	.driver_name		= "tfp410",
-	.data			= &dvi_panel,
-	.phy.dpi.data_lines	= 24,
+static struct platform_device am3517_evm_tfp410_device = {
+	.name                   = "tfp410",
+	.id                     = 0,
+	.dev.platform_data      = &am3517_evm_tfp410_pdata,
 };
 
-static struct omap_dss_device *am3517_evm_dss_devices[] = {
-	&am3517_evm_lcd_device,
-	&am3517_evm_tv_device,
-	&am3517_evm_dvi_device,
+static struct connector_atv_platform_data am3517_evm_tv_pdata = {
+	.name = "tv",
+	.source = "venc.0",
+	.connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
+	.invert_polarity = false,
+};
+
+static struct platform_device am3517_evm_tv_connector_device = {
+	.name                   = "connector-analog-tv",
+	.id                     = 0,
+	.dev.platform_data      = &am3517_evm_tv_pdata,
 };
 
 static struct omap_dss_board_info am3517_evm_dss_data = {
-	.num_devices	= ARRAY_SIZE(am3517_evm_dss_devices),
-	.devices	= am3517_evm_dss_devices,
-	.default_device	= &am3517_evm_lcd_device,
+	.default_display_name = "lcd",
 };
 
+static void __init am3517_evm_display_init(void)
+{
+	gpio_request_one(LCD_PANEL_PWM, GPIOF_OUT_INIT_HIGH, "lcd panel pwm");
+
+	omap_display_init(&am3517_evm_dss_data);
+
+	platform_device_register(&am3517_evm_tfp410_device);
+	platform_device_register(&am3517_evm_dvi_connector_device);
+	platform_device_register(&am3517_evm_lcd_device);
+	platform_device_register(&am3517_evm_tv_connector_device);
+}
+
 /*
  * Board initialization
  */
@@ -295,7 +334,9 @@ static void __init am3517_evm_init(void)
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 
 	am3517_evm_i2c_init();
-	omap_display_init(&am3517_evm_dss_data);
+
+	am3517_evm_display_init();
+
 	omap_serial_init();
 	omap_sdrc_init(NULL, NULL);
 
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index d4622ed2625..33d159e2386 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -190,52 +190,81 @@ static inline void cm_t35_init_nand(void) {}
 #define CM_T35_LCD_BL_GPIO 58
 #define CM_T35_DVI_EN_GPIO 54
 
-static struct panel_generic_dpi_data lcd_panel = {
-	.name			= "toppoly_tdo35s",
-	.num_gpios		= 1,
-	.gpios			= {
-		CM_T35_LCD_BL_GPIO,
-	},
+static const struct display_timing cm_t35_lcd_videomode = {
+	.pixelclock	= { 0, 26000000, 0 },
+
+	.hactive = { 0, 480, 0 },
+	.hfront_porch = { 0, 104, 0 },
+	.hback_porch = { 0, 8, 0 },
+	.hsync_len = { 0, 8, 0 },
+
+	.vactive = { 0, 640, 0 },
+	.vfront_porch = { 0, 4, 0 },
+	.vback_porch = { 0, 2, 0 },
+	.vsync_len = { 0, 2, 0 },
+
+	.flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
+		DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_NEGEDGE,
+};
+
+static struct panel_dpi_platform_data cm_t35_lcd_pdata = {
+	.name                   = "lcd",
+	.source                 = "dpi.0",
+
+	.data_lines		= 18,
+
+	.display_timing		= &cm_t35_lcd_videomode,
+
+	.enable_gpio		= -1,
+	.backlight_gpio		= CM_T35_LCD_BL_GPIO,
+};
+
+static struct platform_device cm_t35_lcd_device = {
+	.name                   = "panel-dpi",
+	.id                     = 0,
+	.dev.platform_data      = &cm_t35_lcd_pdata,
 };
 
-static struct omap_dss_device cm_t35_lcd_device = {
-	.name			= "lcd",
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.driver_name		= "generic_dpi_panel",
-	.data			= &lcd_panel,
-	.phy.dpi.data_lines	= 18,
+static struct connector_dvi_platform_data cm_t35_dvi_connector_pdata = {
+	.name                   = "dvi",
+	.source                 = "tfp410.0",
+	.i2c_bus_num            = -1,
 };
 
-static struct tfp410_platform_data dvi_panel = {
-	.power_down_gpio	= CM_T35_DVI_EN_GPIO,
-	.i2c_bus_num		= -1,
+static struct platform_device cm_t35_dvi_connector_device = {
+	.name                   = "connector-dvi",
+	.id                     = 0,
+	.dev.platform_data      = &cm_t35_dvi_connector_pdata,
 };
 
-static struct omap_dss_device cm_t35_dvi_device = {
-	.name			= "dvi",
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.driver_name		= "tfp410",
-	.data			= &dvi_panel,
-	.phy.dpi.data_lines	= 24,
+static struct encoder_tfp410_platform_data cm_t35_tfp410_pdata = {
+	.name                   = "tfp410.0",
+	.source                 = "dpi.0",
+	.data_lines             = 24,
+	.power_down_gpio        = CM_T35_DVI_EN_GPIO,
 };
 
-static struct omap_dss_device cm_t35_tv_device = {
-	.name			= "tv",
-	.driver_name		= "venc",
-	.type			= OMAP_DISPLAY_TYPE_VENC,
-	.phy.venc.type		= OMAP_DSS_VENC_TYPE_SVIDEO,
+static struct platform_device cm_t35_tfp410_device = {
+	.name                   = "tfp410",
+	.id                     = 0,
+	.dev.platform_data      = &cm_t35_tfp410_pdata,
 };
 
-static struct omap_dss_device *cm_t35_dss_devices[] = {
-	&cm_t35_lcd_device,
-	&cm_t35_dvi_device,
-	&cm_t35_tv_device,
+static struct connector_atv_platform_data cm_t35_tv_pdata = {
+	.name = "tv",
+	.source = "venc.0",
+	.connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
+	.invert_polarity = false,
+};
+
+static struct platform_device cm_t35_tv_connector_device = {
+	.name                   = "connector-analog-tv",
+	.id                     = 0,
+	.dev.platform_data      = &cm_t35_tv_pdata,
 };
 
 static struct omap_dss_board_info cm_t35_dss_data = {
-	.num_devices	= ARRAY_SIZE(cm_t35_dss_devices),
-	.devices	= cm_t35_dss_devices,
-	.default_device	= &cm_t35_dvi_device,
+	.default_display_name = "dvi",
 };
 
 static struct omap2_mcspi_device_config tdo24m_mcspi_config = {
@@ -280,6 +309,11 @@ static void __init cm_t35_init_display(void)
 		pr_err("CM-T35: failed to register DSS device\n");
 		gpio_free(CM_T35_LCD_EN_GPIO);
 	}
+
+	platform_device_register(&cm_t35_tfp410_device);
+	platform_device_register(&cm_t35_dvi_connector_device);
+	platform_device_register(&cm_t35_lcd_device);
+	platform_device_register(&cm_t35_tv_connector_device);
 }
 
 static struct regulator_consumer_supply cm_t35_vmmc1_supply[] = {
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index f1d91ba5d1a..cdc4fb9960a 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -112,50 +112,81 @@ static struct regulator_consumer_supply devkit8000_vio_supply[] = {
 	REGULATOR_SUPPLY("vcc", "spi2.0"),
 };
 
-static struct panel_generic_dpi_data lcd_panel = {
-	.name			= "innolux_at070tn83",
-	/* gpios filled in code */
+static const struct display_timing devkit8000_lcd_videomode = {
+	.pixelclock	= { 0, 40000000, 0 },
+
+	.hactive = { 0, 800, 0 },
+	.hfront_porch = { 0, 1, 0 },
+	.hback_porch = { 0, 1, 0 },
+	.hsync_len = { 0, 48, 0 },
+
+	.vactive = { 0, 480, 0 },
+	.vfront_porch = { 0, 12, 0 },
+	.vback_porch = { 0, 25, 0 },
+	.vsync_len = { 0, 3, 0 },
+
+	.flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
+		DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE,
 };
 
-static struct omap_dss_device devkit8000_lcd_device = {
+static struct panel_dpi_platform_data devkit8000_lcd_pdata = {
 	.name                   = "lcd",
-	.type                   = OMAP_DISPLAY_TYPE_DPI,
-	.driver_name            = "generic_dpi_panel",
-	.data			= &lcd_panel,
-	.phy.dpi.data_lines     = 24,
+	.source                 = "dpi.0",
+
+	.data_lines		= 24,
+
+	.display_timing		= &devkit8000_lcd_videomode,
+
+	.enable_gpio		= -1,	/* filled in code */
+	.backlight_gpio		= -1,
 };
 
-static struct tfp410_platform_data dvi_panel = {
-	.power_down_gpio	= -1,
-	.i2c_bus_num		= 1,
+static struct platform_device devkit8000_lcd_device = {
+	.name                   = "panel-dpi",
+	.id                     = 0,
+	.dev.platform_data      = &devkit8000_lcd_pdata,
 };
 
-static struct omap_dss_device devkit8000_dvi_device = {
+static struct connector_dvi_platform_data devkit8000_dvi_connector_pdata = {
 	.name                   = "dvi",
-	.type                   = OMAP_DISPLAY_TYPE_DPI,
-	.driver_name            = "tfp410",
-	.data			= &dvi_panel,
-	.phy.dpi.data_lines     = 24,
+	.source                 = "tfp410.0",
+	.i2c_bus_num            = 1,
 };
 
-static struct omap_dss_device devkit8000_tv_device = {
-	.name                   = "tv",
-	.driver_name            = "venc",
-	.type                   = OMAP_DISPLAY_TYPE_VENC,
-	.phy.venc.type          = OMAP_DSS_VENC_TYPE_SVIDEO,
+static struct platform_device devkit8000_dvi_connector_device = {
+	.name                   = "connector-dvi",
+	.id                     = 0,
+	.dev.platform_data      = &devkit8000_dvi_connector_pdata,
 };
 
+static struct encoder_tfp410_platform_data devkit8000_tfp410_pdata = {
+	.name                   = "tfp410.0",
+	.source                 = "dpi.0",
+	.data_lines             = 24,
+	.power_down_gpio        = -1,	/* filled in code */
+};
 
-static struct omap_dss_device *devkit8000_dss_devices[] = {
-	&devkit8000_lcd_device,
-	&devkit8000_dvi_device,
-	&devkit8000_tv_device,
+static struct platform_device devkit8000_tfp410_device = {
+	.name                   = "tfp410",
+	.id                     = 0,
+	.dev.platform_data      = &devkit8000_tfp410_pdata,
+};
+
+static struct connector_atv_platform_data devkit8000_tv_pdata = {
+	.name = "tv",
+	.source = "venc.0",
+	.connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
+	.invert_polarity = false,
+};
+
+static struct platform_device devkit8000_tv_connector_device = {
+	.name                   = "connector-analog-tv",
+	.id                     = 0,
+	.dev.platform_data      = &devkit8000_tv_pdata,
 };
 
 static struct omap_dss_board_info devkit8000_dss_data = {
-	.num_devices = ARRAY_SIZE(devkit8000_dss_devices),
-	.devices = devkit8000_dss_devices,
-	.default_device = &devkit8000_lcd_device,
+	.default_display_name = "lcd",
 };
 
 static uint32_t board_keymap[] = {
@@ -204,11 +235,10 @@ static int devkit8000_twl_gpio_setup(struct device *dev,
 	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
 
 	/* TWL4030_GPIO_MAX + 0 is "LCD_PWREN" (out, active high) */
-	lcd_panel.num_gpios = 1;
-	lcd_panel.gpios[0] = gpio + TWL4030_GPIO_MAX + 0;
+	devkit8000_lcd_pdata.enable_gpio = gpio + TWL4030_GPIO_MAX + 0;
 
 	/* gpio + 7 is "DVI_PD" (out, active low) */
-	dvi_panel.power_down_gpio = gpio + 7;
+	devkit8000_tfp410_pdata.power_down_gpio = gpio + 7;
 
 	return 0;
 }
@@ -413,6 +443,10 @@ static struct platform_device *devkit8000_devices[] __initdata = {
 	&leds_gpio,
 	&keys_gpio,
 	&omap_dm9000_dev,
+	&devkit8000_lcd_device,
+	&devkit8000_tfp410_device,
+	&devkit8000_dvi_connector_device,
+	&devkit8000_tv_connector_device,
 };
 
 static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index 69c0acf5aa6..87e41a8b8d4 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -194,30 +194,48 @@ static struct platform_device h4_flash_device = {
 	.resource	= &h4_flash_resource,
 };
 
-static struct platform_device *h4_devices[] __initdata = {
-	&h4_flash_device,
+static const struct display_timing cm_t35_lcd_videomode = {
+	.pixelclock	= { 0, 6250000, 0 },
+
+	.hactive = { 0, 240, 0 },
+	.hfront_porch = { 0, 15, 0 },
+	.hback_porch = { 0, 60, 0 },
+	.hsync_len = { 0, 15, 0 },
+
+	.vactive = { 0, 320, 0 },
+	.vfront_porch = { 0, 1, 0 },
+	.vback_porch = { 0, 1, 0 },
+	.vsync_len = { 0, 1, 0 },
+
+	.flags = DISPLAY_FLAGS_HSYNC_HIGH | DISPLAY_FLAGS_VSYNC_HIGH |
+		DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE,
 };
 
-static struct panel_generic_dpi_data h4_panel_data = {
-	.name			= "h4",
+static struct panel_dpi_platform_data cm_t35_lcd_pdata = {
+	.name                   = "lcd",
+	.source                 = "dpi.0",
+
+	.data_lines		= 16,
+
+	.display_timing		= &cm_t35_lcd_videomode,
+
+	.enable_gpio		= -1,
+	.backlight_gpio		= -1,
 };
 
-static struct omap_dss_device h4_lcd_device = {
-	.name			= "lcd",
-	.driver_name		= "generic_dpi_panel",
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.phy.dpi.data_lines	= 16,
-	.data			= &h4_panel_data,
+static struct platform_device cm_t35_lcd_device = {
+	.name                   = "panel-dpi",
+	.id                     = 0,
+	.dev.platform_data      = &cm_t35_lcd_pdata,
 };
 
-static struct omap_dss_device *h4_dss_devices[] = {
-	&h4_lcd_device,
+static struct platform_device *h4_devices[] __initdata = {
+	&h4_flash_device,
+	&cm_t35_lcd_device,
 };
 
 static struct omap_dss_board_info h4_dss_data = {
-	.num_devices	= ARRAY_SIZE(h4_dss_devices),
-	.devices	= h4_dss_devices,
-	.default_device	= &h4_lcd_device,
+	.default_display_name = "lcd",
 };
 
 /* 2420 Sysboot setup (2430 is different) */
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 87e65dde8e1..06dbb2d3d38 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -429,31 +429,39 @@ static struct twl4030_gpio_platform_data igep_twl4030_gpio_pdata = {
 	.setup		= igep_twl_gpio_setup,
 };
 
-static struct tfp410_platform_data dvi_panel = {
-	.i2c_bus_num		= 3,
-	.power_down_gpio	= IGEP2_GPIO_DVI_PUP,
+static struct connector_dvi_platform_data omap3stalker_dvi_connector_pdata = {
+	.name                   = "dvi",
+	.source                 = "tfp410.0",
+	.i2c_bus_num            = 3,
 };
 
-static struct omap_dss_device igep2_dvi_device = {
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.name			= "dvi",
-	.driver_name		= "tfp410",
-	.data			= &dvi_panel,
-	.phy.dpi.data_lines	= 24,
+static struct platform_device omap3stalker_dvi_connector_device = {
+	.name                   = "connector-dvi",
+	.id                     = 0,
+	.dev.platform_data      = &omap3stalker_dvi_connector_pdata,
 };
 
-static struct omap_dss_device *igep2_dss_devices[] = {
-	&igep2_dvi_device
+static struct encoder_tfp410_platform_data omap3stalker_tfp410_pdata = {
+	.name                   = "tfp410.0",
+	.source                 = "dpi.0",
+	.data_lines             = 24,
+	.power_down_gpio        = IGEP2_GPIO_DVI_PUP,
+};
+
+static struct platform_device omap3stalker_tfp410_device = {
+	.name                   = "tfp410",
+	.id                     = 0,
+	.dev.platform_data      = &omap3stalker_tfp410_pdata,
 };
 
 static struct omap_dss_board_info igep2_dss_data = {
-	.num_devices	= ARRAY_SIZE(igep2_dss_devices),
-	.devices	= igep2_dss_devices,
-	.default_device	= &igep2_dvi_device,
+	.default_display_name = "dvi",
 };
 
 static struct platform_device *igep_devices[] __initdata = {
 	&igep_vwlan_device,
+	&omap3stalker_tfp410_device,
+	&omap3stalker_dvi_connector_device,
 };
 
 static int igep2_keymap[] = {
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index 62e4f701b63..dd8da2c5399 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -184,45 +184,70 @@ static inline void __init ldp_init_smsc911x(void)
 #define LCD_PANEL_RESET_GPIO		55
 #define LCD_PANEL_QVGA_GPIO		56
 
-static struct panel_generic_dpi_data ldp_panel_data = {
-	.name			= "nec_nl2432dr22-11b",
-	.num_gpios		= 4,
-	/* gpios filled in code */
+static const struct display_timing ldp_lcd_videomode = {
+	.pixelclock	= { 0, 5400000, 0 },
+
+	.hactive = { 0, 240, 0 },
+	.hfront_porch = { 0, 3, 0 },
+	.hback_porch = { 0, 39, 0 },
+	.hsync_len = { 0, 3, 0 },
+
+	.vactive = { 0, 320, 0 },
+	.vfront_porch = { 0, 2, 0 },
+	.vback_porch = { 0, 7, 0 },
+	.vsync_len = { 0, 1, 0 },
+
+	.flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
+		DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE,
 };
 
-static struct omap_dss_device ldp_lcd_device = {
-	.name			= "lcd",
-	.driver_name		= "generic_dpi_panel",
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.phy.dpi.data_lines	= 18,
-	.data			= &ldp_panel_data,
+static struct panel_dpi_platform_data ldp_lcd_pdata = {
+	.name                   = "lcd",
+	.source                 = "dpi.0",
+
+	.data_lines		= 18,
+
+	.display_timing		= &ldp_lcd_videomode,
+
+	.enable_gpio		= -1,	/* filled in code */
+	.backlight_gpio		= -1,	/* filled in code */
 };
 
-static struct omap_dss_device *ldp_dss_devices[] = {
-	&ldp_lcd_device,
+static struct platform_device ldp_lcd_device = {
+	.name                   = "panel-dpi",
+	.id                     = 0,
+	.dev.platform_data      = &ldp_lcd_pdata,
 };
 
 static struct omap_dss_board_info ldp_dss_data = {
-	.num_devices	= ARRAY_SIZE(ldp_dss_devices),
-	.devices	= ldp_dss_devices,
-	.default_device	= &ldp_lcd_device,
+	.default_display_name = "lcd",
 };
 
 static void __init ldp_display_init(void)
 {
-	ldp_panel_data.gpios[2] = LCD_PANEL_RESET_GPIO;
-	ldp_panel_data.gpios[3] = LCD_PANEL_QVGA_GPIO;
+	int r;
+
+	static struct gpio gpios[] __initdata = {
+		{LCD_PANEL_RESET_GPIO, GPIOF_OUT_INIT_HIGH, "LCD RESET"},
+		{LCD_PANEL_QVGA_GPIO, GPIOF_OUT_INIT_HIGH, "LCD QVGA"},
+	};
+
+	r = gpio_request_array(gpios, ARRAY_SIZE(gpios));
+	if (r) {
+		pr_err("Cannot request LCD GPIOs, error %d\n", r);
+		return;
+	}
 
 	omap_display_init(&ldp_dss_data);
 }
 
 static int ldp_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio)
 {
-	ldp_panel_data.gpios[0] = gpio + 7;
-	ldp_panel_data.gpio_invert[0] = true;
+	/* LCD enable GPIO */
+	ldp_lcd_pdata.enable_gpio = gpio + 7;
 
-	ldp_panel_data.gpios[1] = gpio + 15;
-	ldp_panel_data.gpio_invert[1] = true;
+	/* Backlight enable GPIO */
+	ldp_lcd_pdata.backlight_gpio = gpio + 15;
 
 	return 0;
 }
@@ -322,6 +347,7 @@ static struct omap2_hsmmc_info mmc[] __initdata = {
 
 static struct platform_device *ldp_devices[] __initdata = {
 	&ldp_gpio_keys_device,
+	&ldp_lcd_device,
 };
 
 #ifdef CONFIG_OMAP_MUX
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 1c6ae5f5bae..f26918467ef 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -225,35 +225,46 @@ static struct mtd_partition omap3beagle_nand_partitions[] = {
 
 /* DSS */
 
-static struct tfp410_platform_data dvi_panel = {
-	.i2c_bus_num = 3,
-	.power_down_gpio = -1,
+static struct connector_dvi_platform_data beagle_dvi_connector_pdata = {
+	.name                   = "dvi",
+	.source                 = "tfp410.0",
+	.i2c_bus_num            = 3,
 };
 
-static struct omap_dss_device beagle_dvi_device = {
-	.type = OMAP_DISPLAY_TYPE_DPI,
-	.name = "dvi",
-	.driver_name = "tfp410",
-	.data = &dvi_panel,
-	.phy.dpi.data_lines = 24,
+static struct platform_device beagle_dvi_connector_device = {
+	.name                   = "connector-dvi",
+	.id                     = 0,
+	.dev.platform_data      = &beagle_dvi_connector_pdata,
 };
 
-static struct omap_dss_device beagle_tv_device = {
+static struct encoder_tfp410_platform_data beagle_tfp410_pdata = {
+	.name                   = "tfp410.0",
+	.source                 = "dpi.0",
+	.data_lines             = 24,
+	.power_down_gpio        = -1,
+};
+
+static struct platform_device beagle_tfp410_device = {
+	.name                   = "tfp410",
+	.id                     = 0,
+	.dev.platform_data      = &beagle_tfp410_pdata,
+};
+
+static struct connector_atv_platform_data beagle_tv_pdata = {
 	.name = "tv",
-	.driver_name = "venc",
-	.type = OMAP_DISPLAY_TYPE_VENC,
-	.phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
+	.source = "venc.0",
+	.connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
+	.invert_polarity = false,
 };
 
-static struct omap_dss_device *beagle_dss_devices[] = {
-	&beagle_dvi_device,
-	&beagle_tv_device,
+static struct platform_device beagle_tv_connector_device = {
+	.name                   = "connector-analog-tv",
+	.id                     = 0,
+	.dev.platform_data      = &beagle_tv_pdata,
 };
 
 static struct omap_dss_board_info beagle_dss_data = {
-	.num_devices = ARRAY_SIZE(beagle_dss_devices),
-	.devices = beagle_dss_devices,
-	.default_device = &beagle_dvi_device,
+	.default_display_name = "dvi",
 };
 
 #include "sdram-micron-mt46h32m32lf-6.h"
@@ -332,7 +343,11 @@ static int beagle_twl_gpio_setup(struct device *dev,
 		if (gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC"))
 			pr_err("%s: unable to configure EHCI_nOC\n", __func__);
 	}
-	dvi_panel.power_down_gpio = beagle_config.dvi_pd_gpio;
+	beagle_tfp410_pdata.power_down_gpio = beagle_config.dvi_pd_gpio;
+
+	platform_device_register(&beagle_tfp410_device);
+	platform_device_register(&beagle_dvi_connector_device);
+	platform_device_register(&beagle_tv_connector_device);
 
 	/* TWL4030_GPIO_MAX i.e. LED_GPO controls HS USB Port 2 power */
 	phy_data[0].vcc_gpio = gpio + TWL4030_GPIO_MAX;
@@ -547,6 +562,7 @@ static void __init omap3_beagle_init(void)
 	if (gpio_is_valid(beagle_config.dvi_pd_gpio))
 		omap_mux_init_gpio(beagle_config.dvi_pd_gpio, OMAP_PIN_OUTPUT);
 	omap_display_init(&beagle_dss_data);
+
 	omap_serial_init();
 	omap_sdrc_init(mt46h32m32lf6_sdrc_params,
 				  mt46h32m32lf6_sdrc_params);
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 52bdddd41e0..18143873346 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -166,14 +166,6 @@ static inline void __init omap3evm_init_smsc911x(void) { return; }
  */
 #define OMAP3EVM_DVI_PANEL_EN_GPIO	199
 
-static struct panel_sharp_ls037v7dw01_data omap3_evm_lcd_data = {
-	.resb_gpio = OMAP3EVM_LCD_PANEL_RESB,
-	.ini_gpio = OMAP3EVM_LCD_PANEL_INI,
-	.mo_gpio = OMAP3EVM_LCD_PANEL_QVGA,
-	.lr_gpio = OMAP3EVM_LCD_PANEL_LR,
-	.ud_gpio = OMAP3EVM_LCD_PANEL_UD,
-};
-
 #ifdef CONFIG_BROKEN
 static void __init omap3_evm_display_init(void)
 {
@@ -196,44 +188,65 @@ static void __init omap3_evm_display_init(void)
 }
 #endif
 
-static struct omap_dss_device omap3_evm_lcd_device = {
-	.name			= "lcd",
-	.driver_name		= "sharp_ls_panel",
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.phy.dpi.data_lines	= 18,
-	.data			= &omap3_evm_lcd_data,
+static struct panel_sharp_ls037v7dw01_platform_data omap3_evm_lcd_pdata = {
+	.name                   = "lcd",
+	.source                 = "dpi.0",
+
+	.data_lines		= 18,
+
+	.resb_gpio		= OMAP3EVM_LCD_PANEL_RESB,
+	.ini_gpio		= OMAP3EVM_LCD_PANEL_INI,
+	.mo_gpio		= OMAP3EVM_LCD_PANEL_QVGA,
+	.lr_gpio		= OMAP3EVM_LCD_PANEL_LR,
+	.ud_gpio		= OMAP3EVM_LCD_PANEL_UD,
+};
+
+static struct platform_device omap3_evm_lcd_device = {
+	.name                   = "panel-sharp-ls037v7dw01",
+	.id                     = 0,
+	.dev.platform_data      = &omap3_evm_lcd_pdata,
+};
+
+static struct connector_dvi_platform_data omap3_evm_dvi_connector_pdata = {
+	.name                   = "dvi",
+	.source                 = "tfp410.0",
+	.i2c_bus_num            = -1,
+};
+
+static struct platform_device omap3_evm_dvi_connector_device = {
+	.name                   = "connector-dvi",
+	.id                     = 0,
+	.dev.platform_data      = &omap3_evm_dvi_connector_pdata,
 };
 
-static struct omap_dss_device omap3_evm_tv_device = {
-	.name			= "tv",
-	.driver_name		= "venc",
-	.type			= OMAP_DISPLAY_TYPE_VENC,
-	.phy.venc.type		= OMAP_DSS_VENC_TYPE_SVIDEO,
+static struct encoder_tfp410_platform_data omap3_evm_tfp410_pdata = {
+	.name                   = "tfp410.0",
+	.source                 = "dpi.0",
+	.data_lines             = 24,
+	.power_down_gpio        = OMAP3EVM_DVI_PANEL_EN_GPIO,
 };
 
-static struct tfp410_platform_data dvi_panel = {
-	.power_down_gpio	= OMAP3EVM_DVI_PANEL_EN_GPIO,
-	.i2c_bus_num		= -1,
+static struct platform_device omap3_evm_tfp410_device = {
+	.name                   = "tfp410",
+	.id                     = 0,
+	.dev.platform_data      = &omap3_evm_tfp410_pdata,
 };
 
-static struct omap_dss_device omap3_evm_dvi_device = {
-	.name			= "dvi",
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.driver_name		= "tfp410",
-	.data			= &dvi_panel,
-	.phy.dpi.data_lines	= 24,
+static struct connector_atv_platform_data omap3_evm_tv_pdata = {
+	.name = "tv",
+	.source = "venc.0",
+	.connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
+	.invert_polarity = false,
 };
 
-static struct omap_dss_device *omap3_evm_dss_devices[] = {
-	&omap3_evm_lcd_device,
-	&omap3_evm_tv_device,
-	&omap3_evm_dvi_device,
+static struct platform_device omap3_evm_tv_connector_device = {
+	.name                   = "connector-analog-tv",
+	.id                     = 0,
+	.dev.platform_data      = &omap3_evm_tv_pdata,
 };
 
 static struct omap_dss_board_info omap3_evm_dss_data = {
-	.num_devices	= ARRAY_SIZE(omap3_evm_dss_devices),
-	.devices	= omap3_evm_dss_devices,
-	.default_device	= &omap3_evm_lcd_device,
+	.default_display_name = "lcd",
 };
 
 static struct regulator_consumer_supply omap3evm_vmmc1_supply[] = {
@@ -678,6 +691,10 @@ static void __init omap3_evm_init(void)
 	omap3_evm_i2c_init();
 
 	omap_display_init(&omap3_evm_dss_data);
+	platform_device_register(&omap3_evm_lcd_device);
+	platform_device_register(&omap3_evm_tfp410_device);
+	platform_device_register(&omap3_evm_dvi_connector_device);
+	platform_device_register(&omap3_evm_tv_connector_device);
 
 	omap_serial_init();
 	omap_sdrc_init(mt46h32m32lf6_sdrc_params, NULL);
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index d2b455e7048..de1bc6bbe58 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -231,34 +231,21 @@ static struct twl4030_keypad_data pandora_kp_data = {
 	.rep		= 1,
 };
 
-static struct panel_tpo_td043_data lcd_data = {
-	.nreset_gpio		= 157,
-};
-
-static struct omap_dss_device pandora_lcd_device = {
-	.name			= "lcd",
-	.driver_name		= "tpo_td043mtea1_panel",
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.phy.dpi.data_lines	= 24,
-	.data			= &lcd_data,
-};
-
-static struct omap_dss_device pandora_tv_device = {
-	.name			= "tv",
-	.driver_name		= "venc",
-	.type			= OMAP_DISPLAY_TYPE_VENC,
-	.phy.venc.type		= OMAP_DSS_VENC_TYPE_SVIDEO,
+static struct connector_atv_platform_data pandora_tv_pdata = {
+	.name = "tv",
+	.source = "venc.0",
+	.connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
+	.invert_polarity = false,
 };
 
-static struct omap_dss_device *pandora_dss_devices[] = {
-	&pandora_lcd_device,
-	&pandora_tv_device,
+static struct platform_device pandora_tv_connector_device = {
+	.name                   = "connector-analog-tv",
+	.id                     = 0,
+	.dev.platform_data      = &pandora_tv_pdata,
 };
 
 static struct omap_dss_board_info pandora_dss_data = {
-	.num_devices	= ARRAY_SIZE(pandora_dss_devices),
-	.devices	= pandora_dss_devices,
-	.default_device	= &pandora_lcd_device,
+	.default_display_name = "lcd",
 };
 
 static void pandora_wl1251_init_card(struct mmc_card *card)
@@ -348,7 +335,7 @@ static struct regulator_consumer_supply pandora_vdds_supplies[] = {
 };
 
 static struct regulator_consumer_supply pandora_vcc_lcd_supply[] = {
-	REGULATOR_SUPPLY("vcc", "display0"),
+	REGULATOR_SUPPLY("vcc", "spi1.1"),
 };
 
 static struct regulator_consumer_supply pandora_usb_phy_supply[] = {
@@ -529,13 +516,21 @@ static int __init omap3pandora_i2c_init(void)
 	return 0;
 }
 
+static struct panel_tpo_td043mtea1_platform_data pandora_lcd_pdata = {
+	.name                   = "lcd",
+	.source                 = "dpi.0",
+
+	.data_lines		= 24,
+	.nreset_gpio		= 157,
+};
+
 static struct spi_board_info omap3pandora_spi_board_info[] __initdata = {
 	{
-		.modalias		= "tpo_td043mtea1_panel_spi",
+		.modalias		= "panel-tpo-td043mtea1",
 		.bus_num		= 1,
 		.chip_select		= 1,
 		.max_speed_hz		= 375000,
-		.platform_data		= &pandora_lcd_device,
+		.platform_data		= &pandora_lcd_pdata,
 	}
 };
 
@@ -580,6 +575,7 @@ static struct platform_device *omap3pandora_devices[] __initdata = {
 	&pandora_keys_gpio,
 	&pandora_vwlan_device,
 	&pandora_backlight,
+	&pandora_tv_connector_device,
 };
 
 static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index d37e6b187ae..ba8342fef79 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -93,40 +93,50 @@ static void __init omap3_stalker_display_init(void)
 {
 	return;
 }
+static struct connector_dvi_platform_data omap3stalker_dvi_connector_pdata = {
+	.name                   = "dvi",
+	.source                 = "tfp410.0",
+	.i2c_bus_num            = -1,
+};
 
-static struct omap_dss_device omap3_stalker_tv_device = {
-	.name			= "tv",
-	.driver_name		= "venc",
-	.type			= OMAP_DISPLAY_TYPE_VENC,
-#if defined(CONFIG_OMAP2_VENC_OUT_TYPE_SVIDEO)
-	.phy.venc.type		= OMAP_DSS_VENC_TYPE_SVIDEO,
-#elif defined(CONFIG_OMAP2_VENC_OUT_TYPE_COMPOSITE)
-	.u.venc.type		= OMAP_DSS_VENC_TYPE_COMPOSITE,
-#endif
+static struct platform_device omap3stalker_dvi_connector_device = {
+	.name                   = "connector-dvi",
+	.id                     = 0,
+	.dev.platform_data      = &omap3stalker_dvi_connector_pdata,
 };
 
-static struct tfp410_platform_data dvi_panel = {
-	.power_down_gpio	= DSS_ENABLE_GPIO,
-	.i2c_bus_num		= -1,
+static struct encoder_tfp410_platform_data omap3stalker_tfp410_pdata = {
+	.name                   = "tfp410.0",
+	.source                 = "dpi.0",
+	.data_lines             = 24,
+	.power_down_gpio        = DSS_ENABLE_GPIO,
 };
 
-static struct omap_dss_device omap3_stalker_dvi_device = {
-	.name			= "dvi",
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.driver_name		= "tfp410",
-	.data			= &dvi_panel,
-	.phy.dpi.data_lines	= 24,
+static struct platform_device omap3stalker_tfp410_device = {
+	.name                   = "tfp410",
+	.id                     = 0,
+	.dev.platform_data      = &omap3stalker_tfp410_pdata,
+};
+
+static struct connector_atv_platform_data omap3stalker_tv_pdata = {
+	.name = "tv",
+	.source = "venc.0",
+#if defined(CONFIG_OMAP2_VENC_OUT_TYPE_SVIDEO)
+	.connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
+#elif defined(CONFIG_OMAP2_VENC_OUT_TYPE_COMPOSITE)
+	.connector_type = OMAP_DSS_VENC_TYPE_COMPOSITE,
+#endif
+	.invert_polarity = false,
 };
 
-static struct omap_dss_device *omap3_stalker_dss_devices[] = {
-	&omap3_stalker_tv_device,
-	&omap3_stalker_dvi_device,
+static struct platform_device omap3stalker_tv_connector_device = {
+	.name                   = "connector-analog-tv",
+	.id                     = 0,
+	.dev.platform_data      = &omap3stalker_tv_pdata,
 };
 
 static struct omap_dss_board_info omap3_stalker_dss_data = {
-	.num_devices	= ARRAY_SIZE(omap3_stalker_dss_devices),
-	.devices	= omap3_stalker_dss_devices,
-	.default_device	= &omap3_stalker_dvi_device,
+	.default_display_name = "dvi",
 };
 
 static struct regulator_consumer_supply omap3stalker_vmmc1_supply[] = {
@@ -356,6 +366,9 @@ static struct usbhs_phy_data phy_data[] __initdata = {
 
 static struct platform_device *omap3_stalker_devices[] __initdata = {
 	&keys_gpio,
+	&omap3stalker_tfp410_device,
+	&omap3stalker_dvi_connector_device,
+	&omap3stalker_tv_connector_device,
 };
 
 static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 5748b5d06c2..f6d38411191 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -72,6 +72,9 @@
 #define OVERO_SMSC911X2_CS     4
 #define OVERO_SMSC911X2_GPIO   65
 
+/* whether to register LCD35 instead of LCD43 */
+static bool overo_use_lcd35;
+
 #if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
 	defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
 
@@ -149,78 +152,94 @@ static inline void __init overo_init_smsc911x(void) { return; }
 #define OVERO_GPIO_LCD_EN 144
 #define OVERO_GPIO_LCD_BL 145
 
-static struct tfp410_platform_data dvi_panel = {
-	.i2c_bus_num		= 3,
-	.power_down_gpio	= -1,
+static struct connector_atv_platform_data overo_tv_pdata = {
+	.name = "tv",
+	.source = "venc.0",
+	.connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
+	.invert_polarity = false,
 };
 
-static struct omap_dss_device overo_dvi_device = {
-	.name			= "dvi",
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.driver_name		= "tfp410",
-	.data			= &dvi_panel,
-	.phy.dpi.data_lines	= 24,
+static struct platform_device overo_tv_connector_device = {
+	.name                   = "connector-analog-tv",
+	.id                     = 0,
+	.dev.platform_data      = &overo_tv_pdata,
 };
 
-static struct omap_dss_device overo_tv_device = {
-	.name = "tv",
-	.driver_name = "venc",
-	.type = OMAP_DISPLAY_TYPE_VENC,
-	.phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
+static const struct display_timing overo_lcd43_videomode = {
+	.pixelclock	= { 0, 9200000, 0 },
+
+	.hactive = { 0, 480, 0 },
+	.hfront_porch = { 0, 8, 0 },
+	.hback_porch = { 0, 4, 0 },
+	.hsync_len = { 0, 41, 0 },
+
+	.vactive = { 0, 272, 0 },
+	.vfront_porch = { 0, 4, 0 },
+	.vback_porch = { 0, 2, 0 },
+	.vsync_len = { 0, 10, 0 },
+
+	.flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
+		DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE,
 };
 
-static struct panel_generic_dpi_data lcd43_panel = {
-	.name			= "samsung_lte430wq_f0c",
-	.num_gpios		= 2,
-	.gpios			= {
-		OVERO_GPIO_LCD_EN,
-		OVERO_GPIO_LCD_BL
-	},
+static struct panel_dpi_platform_data overo_lcd43_pdata = {
+	.name                   = "lcd43",
+	.source                 = "dpi.0",
+
+	.data_lines		= 24,
+
+	.display_timing		= &overo_lcd43_videomode,
+
+	.enable_gpio		= OVERO_GPIO_LCD_EN,
+	.backlight_gpio		= OVERO_GPIO_LCD_BL,
 };
 
-static struct omap_dss_device overo_lcd43_device = {
-	.name			= "lcd43",
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.driver_name		= "generic_dpi_panel",
-	.data			= &lcd43_panel,
-	.phy.dpi.data_lines	= 24,
+static struct platform_device overo_lcd43_device = {
+	.name                   = "panel-dpi",
+	.id                     = 0,
+	.dev.platform_data      = &overo_lcd43_pdata,
 };
 
-#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \
-	defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE)
-static struct panel_generic_dpi_data lcd35_panel = {
-	.num_gpios		= 2,
-	.gpios			= {
-		OVERO_GPIO_LCD_EN,
-		OVERO_GPIO_LCD_BL
-	},
+static struct connector_dvi_platform_data overo_dvi_connector_pdata = {
+	.name                   = "dvi",
+	.source                 = "tfp410.0",
+	.i2c_bus_num            = 3,
 };
 
-static struct omap_dss_device overo_lcd35_device = {
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.name			= "lcd35",
-	.driver_name		= "lgphilips_lb035q02_panel",
-	.phy.dpi.data_lines	= 24,
-	.data			= &lcd35_panel,
+static struct platform_device overo_dvi_connector_device = {
+	.name                   = "connector-dvi",
+	.id                     = 0,
+	.dev.platform_data      = &overo_dvi_connector_pdata,
 };
-#endif
 
-static struct omap_dss_device *overo_dss_devices[] = {
-	&overo_dvi_device,
-	&overo_tv_device,
-#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \
-	defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE)
-	&overo_lcd35_device,
-#endif
-	&overo_lcd43_device,
+static struct encoder_tfp410_platform_data overo_tfp410_pdata = {
+	.name                   = "tfp410.0",
+	.source                 = "dpi.0",
+	.data_lines             = 24,
+	.power_down_gpio        = -1,
+};
+
+static struct platform_device overo_tfp410_device = {
+	.name                   = "tfp410",
+	.id                     = 0,
+	.dev.platform_data      = &overo_tfp410_pdata,
 };
 
 static struct omap_dss_board_info overo_dss_data = {
-	.num_devices	= ARRAY_SIZE(overo_dss_devices),
-	.devices	= overo_dss_devices,
-	.default_device	= &overo_dvi_device,
+	.default_display_name = "lcd43",
 };
 
+static void __init overo_display_init(void)
+{
+	omap_display_init(&overo_dss_data);
+
+	if (!overo_use_lcd35)
+		platform_device_register(&overo_lcd43_device);
+	platform_device_register(&overo_tfp410_device);
+	platform_device_register(&overo_dvi_connector_device);
+	platform_device_register(&overo_tv_connector_device);
+}
+
 static struct mtd_partition overo_nand_partitions[] = {
 	{
 		.name           = "xloader",
@@ -408,24 +427,41 @@ static int __init overo_i2c_init(void)
 	return 0;
 }
 
+static struct panel_lb035q02_platform_data overo_lcd35_pdata = {
+	.name                   = "lcd35",
+	.source                 = "dpi.0",
+
+	.data_lines		= 24,
+
+	.enable_gpio		= OVERO_GPIO_LCD_EN,
+	.backlight_gpio		= OVERO_GPIO_LCD_BL,
+};
+
+/*
+ * NOTE: We need to add either the lgphilips panel, or the lcd43 panel. The
+ * selection is done based on the overo_use_lcd35 field. If new SPI
+ * devices are added here, extra work is needed to make only the lgphilips panel
+ * affected by the overo_use_lcd35 field.
+ */
 static struct spi_board_info overo_spi_board_info[] __initdata = {
-#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \
-	defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE)
 	{
-		.modalias		= "lgphilips_lb035q02_panel-spi",
+		.modalias		= "panel_lgphilips_lb035q02",
 		.bus_num		= 1,
 		.chip_select		= 1,
 		.max_speed_hz		= 500000,
 		.mode			= SPI_MODE_3,
+		.platform_data		= &overo_lcd35_pdata,
 	},
-#endif
 };
 
 static int __init overo_spi_init(void)
 {
 	overo_ads7846_init();
-	spi_register_board_info(overo_spi_board_info,
-			ARRAY_SIZE(overo_spi_board_info));
+
+	if (overo_use_lcd35) {
+		spi_register_board_info(overo_spi_board_info,
+				ARRAY_SIZE(overo_spi_board_info));
+	}
 	return 0;
 }
 
@@ -463,11 +499,13 @@ static void __init overo_init(void)
 {
 	int ret;
 
+	if (strstr(boot_command_line, "omapdss.def_disp=lcd35"))
+		overo_use_lcd35 = true;
+
 	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	overo_i2c_init();
 	omap_hsmmc_init(mmc);
-	omap_display_init(&overo_dss_data);
 	omap_serial_init();
 	omap_sdrc_init(mt46h32m32lf6_sdrc_params,
 				  mt46h32m32lf6_sdrc_params);
@@ -484,6 +522,8 @@ static void __init overo_init(void)
 	overo_init_keys();
 	omap_twl4030_audio_init("overo", NULL);
 
+	overo_display_init();
+
 	/* Ensure SDRC pins are mux'd for self-refresh */
 	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
 	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 9c2dd102fbb..c3270c0f1fc 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -45,6 +45,8 @@
 #include <linux/platform_data/tsl2563.h>
 #include <linux/lis3lv02d.h>
 
+#include <video/omap-panel-data.h>
+
 #if defined(CONFIG_IR_RX51) || defined(CONFIG_IR_RX51_MODULE)
 #include <media/ir-rx51.h>
 #endif
@@ -226,6 +228,15 @@ static struct lp55xx_platform_data rx51_lp5523_platform_data = {
 };
 #endif
 
+#define RX51_LCD_RESET_GPIO	90
+
+static struct panel_acx565akm_platform_data acx_pdata = {
+	.name		= "lcd",
+	.source		= "sdi.0",
+	.reset_gpio	= RX51_LCD_RESET_GPIO,
+	.datapairs	= 2,
+};
+
 static struct omap2_mcspi_device_config wl1251_mcspi_config = {
 	.turbo_mode	= 0,
 };
@@ -254,6 +265,7 @@ static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = {
 		.chip_select		= 2,
 		.max_speed_hz		= 6000000,
 		.controller_data	= &mipid_mcspi_config,
+		.platform_data		= &acx_pdata,
 	},
 	[RX51_SPI_TSC2005] = {
 		.modalias		= "tsc2005",
diff --git a/arch/arm/mach-omap2/board-rx51-video.c b/arch/arm/mach-omap2/board-rx51-video.c
index bdd1e3a179e..43a90c8d683 100644
--- a/arch/arm/mach-omap2/board-rx51-video.c
+++ b/arch/arm/mach-omap2/board-rx51-video.c
@@ -29,34 +29,21 @@
 
 #if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
 
-static struct panel_acx565akm_data lcd_data = {
-	.reset_gpio	= RX51_LCD_RESET_GPIO,
+static struct connector_atv_platform_data rx51_tv_pdata = {
+	.name = "tv",
+	.source = "venc.0",
+	.connector_type = OMAP_DSS_VENC_TYPE_COMPOSITE,
+	.invert_polarity = false,
 };
 
-static struct omap_dss_device rx51_lcd_device = {
-	.name			= "lcd",
-	.driver_name		= "panel-acx565akm",
-	.type			= OMAP_DISPLAY_TYPE_SDI,
-	.phy.sdi.datapairs	= 2,
-	.data			= &lcd_data,
-};
-
-static struct omap_dss_device  rx51_tv_device = {
-	.name			= "tv",
-	.type			= OMAP_DISPLAY_TYPE_VENC,
-	.driver_name		= "venc",
-	.phy.venc.type	        = OMAP_DSS_VENC_TYPE_COMPOSITE,
-};
-
-static struct omap_dss_device *rx51_dss_devices[] = {
-	&rx51_lcd_device,
-	&rx51_tv_device,
+static struct platform_device rx51_tv_connector_device = {
+	.name                   = "connector-analog-tv",
+	.id                     = 0,
+	.dev.platform_data      = &rx51_tv_pdata,
 };
 
 static struct omap_dss_board_info rx51_dss_board_info = {
-	.num_devices	= ARRAY_SIZE(rx51_dss_devices),
-	.devices	= rx51_dss_devices,
-	.default_device	= &rx51_lcd_device,
+	.default_display_name = "lcd",
 };
 
 static int __init rx51_video_init(void)
@@ -71,6 +58,8 @@ static int __init rx51_video_init(void)
 
 	omap_display_init(&rx51_dss_board_info);
 
+	platform_device_register(&rx51_tv_connector_device);
+
 	return 0;
 }
 
diff --git a/arch/arm/mach-omap2/board-zoom-display.c b/arch/arm/mach-omap2/board-zoom-display.c
index c2a079cb76f..3d8ecc1e05b 100644
--- a/arch/arm/mach-omap2/board-zoom-display.c
+++ b/arch/arm/mach-omap2/board-zoom-display.c
@@ -25,32 +25,23 @@
 #define LCD_PANEL_RESET_GPIO_PILOT	55
 #define LCD_PANEL_QVGA_GPIO		56
 
-static struct panel_nec_nl8048_data zoom_lcd_data = {
-	/* res_gpio filled in code */
-	.qvga_gpio = LCD_PANEL_QVGA_GPIO,
-};
+static struct panel_nec_nl8048hl11_platform_data zoom_lcd_pdata = {
+	.name                   = "lcd",
+	.source                 = "dpi.0",
 
-static struct omap_dss_device zoom_lcd_device = {
-	.name			= "lcd",
-	.driver_name		= "NEC_8048_panel",
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.phy.dpi.data_lines	= 24,
-	.data			= &zoom_lcd_data,
-};
+	.data_lines		= 24,
 
-static struct omap_dss_device *zoom_dss_devices[] = {
-	&zoom_lcd_device,
+	.res_gpio		= -1,	/* filled in code */
+	.qvga_gpio		= LCD_PANEL_QVGA_GPIO,
 };
 
 static struct omap_dss_board_info zoom_dss_data = {
-	.num_devices		= ARRAY_SIZE(zoom_dss_devices),
-	.devices		= zoom_dss_devices,
-	.default_device		= &zoom_lcd_device,
+	.default_display_name = "lcd",
 };
 
 static void __init zoom_lcd_panel_init(void)
 {
-	zoom_lcd_data.res_gpio = (omap_rev() > OMAP3430_REV_ES3_0) ?
+	zoom_lcd_pdata.res_gpio = (omap_rev() > OMAP3430_REV_ES3_0) ?
 			LCD_PANEL_RESET_GPIO_PROD :
 			LCD_PANEL_RESET_GPIO_PILOT;
 }
@@ -61,19 +52,20 @@ static struct omap2_mcspi_device_config dss_lcd_mcspi_config = {
 
 static struct spi_board_info nec_8048_spi_board_info[] __initdata = {
 	[0] = {
-		.modalias		= "nec_8048_spi",
+		.modalias		= "panel-nec-nl8048hl11",
 		.bus_num		= 1,
 		.chip_select		= 2,
 		.max_speed_hz		= 375000,
 		.controller_data	= &dss_lcd_mcspi_config,
+		.platform_data		= &zoom_lcd_pdata,
 	},
 };
 
 void __init zoom_display_init(void)
 {
 	omap_display_init(&zoom_dss_data);
+	zoom_lcd_panel_init();
 	spi_register_board_info(nec_8048_spi_board_info,
 				ARRAY_SIZE(nec_8048_spi_board_info));
-	zoom_lcd_panel_init();
 }
 
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index ff37be1f6f9..03a0516c7f6 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -400,7 +400,7 @@ int __init omap_display_init(struct omap_dss_board_info *board_data)
 
 	/* Create devices for DPI and SDI */
 
-	pdev = create_simple_dss_pdev("omapdss_dpi", -1,
+	pdev = create_simple_dss_pdev("omapdss_dpi", 0,
 			board_data, sizeof(*board_data), dss_pdev);
 	if (IS_ERR(pdev)) {
 		pr_err("Could not build platform_device for omapdss_dpi\n");
@@ -408,7 +408,7 @@ int __init omap_display_init(struct omap_dss_board_info *board_data)
 	}
 
 	if (cpu_is_omap34xx()) {
-		pdev = create_simple_dss_pdev("omapdss_sdi", -1,
+		pdev = create_simple_dss_pdev("omapdss_sdi", 0,
 				board_data, sizeof(*board_data), dss_pdev);
 		if (IS_ERR(pdev)) {
 			pr_err("Could not build platform_device for omapdss_sdi\n");
diff --git a/arch/arm/mach-omap2/dss-common.c b/arch/arm/mach-omap2/dss-common.c
index 043e5705f2a..bf89effa4c9 100644
--- a/arch/arm/mach-omap2/dss-common.c
+++ b/arch/arm/mach-omap2/dss-common.c
@@ -25,6 +25,7 @@
 
 #include <linux/kernel.h>
 #include <linux/gpio.h>
+#include <linux/platform_device.h>
 
 #include <video/omapdss.h>
 #include <video/omap-panel-data.h>
@@ -37,70 +38,76 @@
 #define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */
 #define HDMI_GPIO_HPD  63 /* Hotplug detect */
 
-/* Display DVI */
 #define PANDA_DVI_TFP410_POWER_DOWN_GPIO	0
 
-/* Using generic display panel */
-static struct tfp410_platform_data omap4_dvi_panel = {
-	.i2c_bus_num		= 2,
-	.power_down_gpio	= PANDA_DVI_TFP410_POWER_DOWN_GPIO,
+/* DVI Connector */
+static struct connector_dvi_platform_data omap4_panda_dvi_connector_pdata = {
+	.name                   = "dvi",
+	.source                 = "tfp410.0",
+	.i2c_bus_num            = 2,
 };
 
-static struct omap_dss_device omap4_panda_dvi_device = {
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.name			= "dvi",
-	.driver_name		= "tfp410",
-	.data			= &omap4_dvi_panel,
-	.phy.dpi.data_lines	= 24,
-	.channel		= OMAP_DSS_CHANNEL_LCD2,
+static struct platform_device omap4_panda_dvi_connector_device = {
+	.name                   = "connector-dvi",
+	.id                     = 0,
+	.dev.platform_data      = &omap4_panda_dvi_connector_pdata,
 };
 
-static struct omap_dss_hdmi_data omap4_panda_hdmi_data = {
+/* TFP410 DPI-to-DVI chip */
+static struct encoder_tfp410_platform_data omap4_panda_tfp410_pdata = {
+	.name                   = "tfp410.0",
+	.source                 = "dpi.0",
+	.data_lines             = 24,
+	.power_down_gpio        = PANDA_DVI_TFP410_POWER_DOWN_GPIO,
+};
+
+static struct platform_device omap4_panda_tfp410_device = {
+	.name                   = "tfp410",
+	.id                     = 0,
+	.dev.platform_data      = &omap4_panda_tfp410_pdata,
+};
+
+/* HDMI Connector */
+static struct connector_hdmi_platform_data omap4_panda_hdmi_connector_pdata = {
+	.name                   = "hdmi",
+	.source                 = "tpd12s015.0",
+};
+
+static struct platform_device omap4_panda_hdmi_connector_device = {
+	.name                   = "connector-hdmi",
+	.id                     = 0,
+	.dev.platform_data      = &omap4_panda_hdmi_connector_pdata,
+};
+
+/* TPD12S015 HDMI ESD protection & level shifter chip */
+static struct encoder_tpd12s015_platform_data omap4_panda_tpd_pdata = {
+	.name                   = "tpd12s015.0",
+	.source                 = "hdmi.0",
+
 	.ct_cp_hpd_gpio = HDMI_GPIO_CT_CP_HPD,
 	.ls_oe_gpio = HDMI_GPIO_LS_OE,
 	.hpd_gpio = HDMI_GPIO_HPD,
 };
 
-static struct omap_dss_device  omap4_panda_hdmi_device = {
-	.name = "hdmi",
-	.driver_name = "hdmi_panel",
-	.type = OMAP_DISPLAY_TYPE_HDMI,
-	.channel = OMAP_DSS_CHANNEL_DIGIT,
-	.data = &omap4_panda_hdmi_data,
-};
-
-static struct omap_dss_device *omap4_panda_dss_devices[] = {
-	&omap4_panda_dvi_device,
-	&omap4_panda_hdmi_device,
+static struct platform_device omap4_panda_tpd_device = {
+	.name                   = "tpd12s015",
+	.id                     = 0,
+	.dev.platform_data      = &omap4_panda_tpd_pdata,
 };
 
 static struct omap_dss_board_info omap4_panda_dss_data = {
-	.num_devices	= ARRAY_SIZE(omap4_panda_dss_devices),
-	.devices	= omap4_panda_dss_devices,
-	.default_device	= &omap4_panda_dvi_device,
+	.default_display_name = "dvi",
 };
 
-void __init omap4_panda_display_init(void)
+void __init omap4_panda_display_init_of(void)
 {
 	omap_display_init(&omap4_panda_dss_data);
 
-	/*
-	 * OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and
-	 * later have external pull up on the HDMI I2C lines
-	 */
-	if (cpu_is_omap446x() || omap_rev() > OMAP4430_REV_ES2_2)
-		omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP);
-	else
-		omap_hdmi_init(0);
-
-	omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT);
-	omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT);
-	omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN);
-}
+	platform_device_register(&omap4_panda_tfp410_device);
+	platform_device_register(&omap4_panda_dvi_connector_device);
 
-void __init omap4_panda_display_init_of(void)
-{
-	omap_display_init(&omap4_panda_dss_data);
+	platform_device_register(&omap4_panda_tpd_device);
+	platform_device_register(&omap4_panda_hdmi_connector_device);
 }
 
 
@@ -109,93 +116,73 @@ void __init omap4_panda_display_init_of(void)
 #define DISPLAY_SEL_GPIO	59	/* LCD2/PicoDLP switch */
 #define DLP_POWER_ON_GPIO	40
 
-static struct nokia_dsi_panel_data dsi1_panel = {
-		.name		= "taal",
-		.reset_gpio	= 102,
-		.use_ext_te	= false,
-		.ext_te_gpio	= 101,
-		.esd_interval	= 0,
-		.pin_config = {
-			.num_pins	= 6,
-			.pins		= { 0, 1, 2, 3, 4, 5 },
-		},
-};
-
-static struct omap_dss_device sdp4430_lcd_device = {
-	.name			= "lcd",
-	.driver_name		= "taal",
-	.type			= OMAP_DISPLAY_TYPE_DSI,
-	.data			= &dsi1_panel,
-	.phy.dsi		= {
-		.module		= 0,
+static struct panel_dsicm_platform_data dsi1_panel = {
+	.name		= "lcd",
+	.source		= "dsi.0",
+	.reset_gpio	= 102,
+	.use_ext_te	= false,
+	.ext_te_gpio	= 101,
+	.pin_config = {
+		.num_pins	= 6,
+		.pins		= { 0, 1, 2, 3, 4, 5 },
 	},
-	.channel		= OMAP_DSS_CHANNEL_LCD,
 };
 
-static struct nokia_dsi_panel_data dsi2_panel = {
-		.name		= "taal",
-		.reset_gpio	= 104,
-		.use_ext_te	= false,
-		.ext_te_gpio	= 103,
-		.esd_interval	= 0,
-		.pin_config = {
-			.num_pins	= 6,
-			.pins		= { 0, 1, 2, 3, 4, 5 },
-		},
+static struct platform_device sdp4430_lcd_device = {
+	.name                   = "panel-dsi-cm",
+	.id                     = 0,
+	.dev.platform_data	= &dsi1_panel,
 };
 
-static struct omap_dss_device sdp4430_lcd2_device = {
-	.name			= "lcd2",
-	.driver_name		= "taal",
-	.type			= OMAP_DISPLAY_TYPE_DSI,
-	.data			= &dsi2_panel,
-	.phy.dsi		= {
-
-		.module		= 1,
+static struct panel_dsicm_platform_data dsi2_panel = {
+	.name		= "lcd2",
+	.source		= "dsi.1",
+	.reset_gpio	= 104,
+	.use_ext_te	= false,
+	.ext_te_gpio	= 103,
+	.pin_config = {
+		.num_pins	= 6,
+		.pins		= { 0, 1, 2, 3, 4, 5 },
 	},
-	.channel		= OMAP_DSS_CHANNEL_LCD2,
 };
 
-static struct omap_dss_hdmi_data sdp4430_hdmi_data = {
-	.ct_cp_hpd_gpio = HDMI_GPIO_CT_CP_HPD,
-	.ls_oe_gpio = HDMI_GPIO_LS_OE,
-	.hpd_gpio = HDMI_GPIO_HPD,
+static struct platform_device sdp4430_lcd2_device = {
+	.name                   = "panel-dsi-cm",
+	.id                     = 1,
+	.dev.platform_data	= &dsi2_panel,
 };
 
-static struct omap_dss_device sdp4430_hdmi_device = {
-	.name = "hdmi",
-	.driver_name = "hdmi_panel",
-	.type = OMAP_DISPLAY_TYPE_HDMI,
-	.channel = OMAP_DSS_CHANNEL_DIGIT,
-	.data = &sdp4430_hdmi_data,
+/* HDMI Connector */
+static struct connector_hdmi_platform_data sdp4430_hdmi_connector_pdata = {
+	.name                   = "hdmi",
+	.source                 = "tpd12s015.0",
 };
 
-static struct picodlp_panel_data sdp4430_picodlp_pdata = {
-	.picodlp_adapter_id	= 2,
-	.emu_done_gpio		= 44,
-	.pwrgood_gpio		= 45,
+static struct platform_device sdp4430_hdmi_connector_device = {
+	.name                   = "connector-hdmi",
+	.id                     = 0,
+	.dev.platform_data      = &sdp4430_hdmi_connector_pdata,
 };
 
-static struct omap_dss_device sdp4430_picodlp_device = {
-	.name			= "picodlp",
-	.driver_name		= "picodlp_panel",
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.phy.dpi.data_lines	= 24,
-	.channel		= OMAP_DSS_CHANNEL_LCD2,
-	.data			= &sdp4430_picodlp_pdata,
+/* TPD12S015 HDMI ESD protection & level shifter chip */
+static struct encoder_tpd12s015_platform_data sdp4430_tpd_pdata = {
+	.name                   = "tpd12s015.0",
+	.source                 = "hdmi.0",
+
+	.ct_cp_hpd_gpio = HDMI_GPIO_CT_CP_HPD,
+	.ls_oe_gpio = HDMI_GPIO_LS_OE,
+	.hpd_gpio = HDMI_GPIO_HPD,
 };
 
-static struct omap_dss_device *sdp4430_dss_devices[] = {
-	&sdp4430_lcd_device,
-	&sdp4430_lcd2_device,
-	&sdp4430_hdmi_device,
-	&sdp4430_picodlp_device,
+static struct platform_device sdp4430_tpd_device = {
+	.name                   = "tpd12s015",
+	.id                     = 0,
+	.dev.platform_data      = &sdp4430_tpd_pdata,
 };
 
+
 static struct omap_dss_board_info sdp4430_dss_data = {
-	.num_devices	= ARRAY_SIZE(sdp4430_dss_devices),
-	.devices	= sdp4430_dss_devices,
-	.default_device	= &sdp4430_lcd_device,
+	.default_display_name = "lcd",
 };
 
 /*
@@ -204,7 +191,7 @@ static struct omap_dss_board_info sdp4430_dss_data = {
  * used by picodlp on the 4430sdp platform. Keep this gpio disabled as LCD2 is
  * selected by default
  */
-void __init omap_4430sdp_display_init(void)
+void __init omap_4430sdp_display_init_of(void)
 {
 	int r;
 
@@ -219,33 +206,10 @@ void __init omap_4430sdp_display_init(void)
 		pr_err("%s: Could not get DLP POWER ON GPIO\n", __func__);
 
 	omap_display_init(&sdp4430_dss_data);
-	/*
-	 * OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and
-	 * later have external pull up on the HDMI I2C lines
-	 */
-	if (cpu_is_omap446x() || omap_rev() > OMAP4430_REV_ES2_2)
-		omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP);
-	else
-		omap_hdmi_init(0);
-
-	omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT);
-	omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT);
-	omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN);
-}
-
-void __init omap_4430sdp_display_init_of(void)
-{
-	int r;
 
-	r = gpio_request_one(DISPLAY_SEL_GPIO, GPIOF_OUT_INIT_HIGH,
-			"display_sel");
-	if (r)
-		pr_err("%s: Could not get display_sel GPIO\n", __func__);
-
-	r = gpio_request_one(DLP_POWER_ON_GPIO, GPIOF_OUT_INIT_LOW,
-		"DLP POWER ON");
-	if (r)
-		pr_err("%s: Could not get DLP POWER ON GPIO\n", __func__);
+	platform_device_register(&sdp4430_lcd_device);
+	platform_device_register(&sdp4430_lcd2_device);
 
-	omap_display_init(&sdp4430_dss_data);
+	platform_device_register(&sdp4430_tpd_device);
+	platform_device_register(&sdp4430_hdmi_connector_device);
 }
diff --git a/arch/arm/mach-omap2/dss-common.h b/arch/arm/mach-omap2/dss-common.h
index 915f6fff510..c28fe3c0358 100644
--- a/arch/arm/mach-omap2/dss-common.h
+++ b/arch/arm/mach-omap2/dss-common.h
@@ -6,9 +6,7 @@
  * This file will be removed when DSS supports DT.
  */
 
-void __init omap4_panda_display_init(void);
 void __init omap4_panda_display_init_of(void);
-void __init omap_4430sdp_display_init(void);
 void __init omap_4430sdp_display_init_of(void);
 
 #endif