diff options
Diffstat (limited to 'arch')
-rw-r--r-- | arch/arc/include/asm/cache.h | 27 | ||||
-rw-r--r-- | arch/arc/kernel/head.S | 38 | ||||
-rw-r--r-- | arch/arc/mm/cache_arc700.c | 106 |
3 files changed, 87 insertions, 84 deletions
diff --git a/arch/arc/include/asm/cache.h b/arch/arc/include/asm/cache.h index 2fd3162ec4d..c1d3d2da119 100644 --- a/arch/arc/include/asm/cache.h +++ b/arch/arc/include/asm/cache.h @@ -55,4 +55,31 @@ extern void read_decode_cache_bcr(void); #endif /* !__ASSEMBLY__ */ +/* Instruction cache related Auxiliary registers */ +#define ARC_REG_IC_BCR 0x77 /* Build Config reg */ +#define ARC_REG_IC_IVIC 0x10 +#define ARC_REG_IC_CTRL 0x11 +#define ARC_REG_IC_IVIL 0x19 +#if defined(CONFIG_ARC_MMU_V3) || defined (CONFIG_ARC_MMU_V4) +#define ARC_REG_IC_PTAG 0x1E +#endif + +/* Bit val in IC_CTRL */ +#define IC_CTRL_CACHE_DISABLE 0x1 + +/* Data cache related Auxiliary registers */ +#define ARC_REG_DC_BCR 0x72 /* Build Config reg */ +#define ARC_REG_DC_IVDC 0x47 +#define ARC_REG_DC_CTRL 0x48 +#define ARC_REG_DC_IVDL 0x4A +#define ARC_REG_DC_FLSH 0x4B +#define ARC_REG_DC_FLDL 0x4C +#if defined(CONFIG_ARC_MMU_V3) || defined (CONFIG_ARC_MMU_V4) +#define ARC_REG_DC_PTAG 0x5C +#endif + +/* Bit val in DC_CTRL */ +#define DC_CTRL_INV_MODE_FLUSH 0x40 +#define DC_CTRL_FLUSH_STATUS 0x100 + #endif /* _ASM_CACHE_H */ diff --git a/arch/arc/kernel/head.S b/arch/arc/kernel/head.S index 4ad04915dc6..07a58f2d307 100644 --- a/arch/arc/kernel/head.S +++ b/arch/arc/kernel/head.S @@ -12,10 +12,42 @@ * to skip certain things during boot on simulator */ +#include <linux/linkage.h> #include <asm/asm-offsets.h> #include <asm/entry.h> -#include <linux/linkage.h> #include <asm/arcregs.h> +#include <asm/cache.h> + +.macro CPU_EARLY_SETUP + + ; Setting up Vectror Table (in case exception happens in early boot + sr @_int_vec_base_lds, [AUX_INTR_VEC_BASE] + + ; Disable I-cache/D-cache if kernel so configured + lr r5, [ARC_REG_IC_BCR] + breq r5, 0, 1f ; I$ doesn't exist + lr r5, [ARC_REG_IC_CTRL] +#ifdef CONFIG_ARC_HAS_ICACHE + bclr r5, r5, 0 ; 0 - Enable, 1 is Disable +#else + bset r5, r5, 0 ; I$ exists, but is not used +#endif + sr r5, [ARC_REG_IC_CTRL] + +1: + lr r5, [ARC_REG_DC_BCR] + breq r5, 0, 1f ; D$ doesn't exist + lr r5, [ARC_REG_DC_CTRL] + bclr r5, r5, 6 ; Invalidate (discard w/o wback) +#ifdef CONFIG_ARC_HAS_DCACHE + bclr r5, r5, 0 ; Enable (+Inv) +#else + bset r5, r5, 0 ; Disable (+Inv) +#endif + sr r5, [ARC_REG_DC_CTRL] + +1: +.endm .cpu A7 @@ -27,7 +59,7 @@ stext: ; Don't clobber r0-r2 yet. It might have bootloader provided info ;------------------------------------------------------------------- - sr @_int_vec_base_lds, [AUX_INTR_VEC_BASE] + CPU_EARLY_SETUP #ifdef CONFIG_SMP ; Ensure Boot (Master) proceeds. Others wait in platform dependent way @@ -90,7 +122,7 @@ stext: first_lines_of_secondary: - sr @_int_vec_base_lds, [AUX_INTR_VEC_BASE] + CPU_EARLY_SETUP ; setup per-cpu idle task as "current" on this CPU ld r0, [@secondary_idle_tsk] diff --git a/arch/arc/mm/cache_arc700.c b/arch/arc/mm/cache_arc700.c index 23c3832e6d9..1f676c4794e 100644 --- a/arch/arc/mm/cache_arc700.c +++ b/arch/arc/mm/cache_arc700.c @@ -73,33 +73,6 @@ #include <asm/cachectl.h> #include <asm/setup.h> -/* Instruction cache related Auxiliary registers */ -#define ARC_REG_IC_BCR 0x77 /* Build Config reg */ -#define ARC_REG_IC_IVIC 0x10 -#define ARC_REG_IC_CTRL 0x11 -#define ARC_REG_IC_IVIL 0x19 -#if (CONFIG_ARC_MMU_VER > 2) -#define ARC_REG_IC_PTAG 0x1E -#endif - -/* Bit val in IC_CTRL */ -#define IC_CTRL_CACHE_DISABLE 0x1 - -/* Data cache related Auxiliary registers */ -#define ARC_REG_DC_BCR 0x72 /* Build Config reg */ -#define ARC_REG_DC_IVDC 0x47 -#define ARC_REG_DC_CTRL 0x48 -#define ARC_REG_DC_IVDL 0x4A -#define ARC_REG_DC_FLSH 0x4B -#define ARC_REG_DC_FLDL 0x4C -#if (CONFIG_ARC_MMU_VER > 2) -#define ARC_REG_DC_PTAG 0x5C -#endif - -/* Bit val in DC_CTRL */ -#define DC_CTRL_INV_MODE_FLUSH 0x40 -#define DC_CTRL_FLUSH_STATUS 0x100 - char *arc_cache_mumbojumbo(int c, char *buf, int len) { int n = 0; @@ -168,72 +141,43 @@ void read_decode_cache_bcr(void) */ void arc_cache_init(void) { - unsigned int cpu = smp_processor_id(); - struct cpuinfo_arc_cache *ic = &cpuinfo_arc700[cpu].icache; - struct cpuinfo_arc_cache *dc = &cpuinfo_arc700[cpu].dcache; - unsigned int dcache_does_alias, temp; + unsigned int __maybe_unused cpu = smp_processor_id(); + struct cpuinfo_arc_cache __maybe_unused *ic, __maybe_unused *dc; char str[256]; printk(arc_cache_mumbojumbo(0, str, sizeof(str))); - if (!ic->ver) - goto chk_dc; - #ifdef CONFIG_ARC_HAS_ICACHE - /* 1. Confirm some of I-cache params which Linux assumes */ - if (ic->line_len != L1_CACHE_BYTES) - panic("Cache H/W doesn't match kernel Config"); - - if (ic->ver != CONFIG_ARC_MMU_VER) - panic("Cache ver doesn't match MMU ver\n"); -#endif - - /* Enable/disable I-Cache */ - temp = read_aux_reg(ARC_REG_IC_CTRL); - -#ifdef CONFIG_ARC_HAS_ICACHE - temp &= ~IC_CTRL_CACHE_DISABLE; -#else - temp |= IC_CTRL_CACHE_DISABLE; + ic = &cpuinfo_arc700[cpu].icache; + if (ic->ver) { + if (ic->line_len != L1_CACHE_BYTES) + panic("ICache line [%d] != kernel Config [%d]", + ic->line_len, L1_CACHE_BYTES); + + if (ic->ver != CONFIG_ARC_MMU_VER) + panic("Cache ver [%d] doesn't match MMU ver [%d]\n", + ic->ver, CONFIG_ARC_MMU_VER); + } #endif - write_aux_reg(ARC_REG_IC_CTRL, temp); - -chk_dc: - if (!dc->ver) - return; - #ifdef CONFIG_ARC_HAS_DCACHE - if (dc->line_len != L1_CACHE_BYTES) - panic("Cache H/W doesn't match kernel Config"); + dc = &cpuinfo_arc700[cpu].dcache; + if (dc->ver) { + unsigned int dcache_does_alias; - /* check for D-Cache aliasing */ - dcache_does_alias = (dc->sz / dc->assoc) > PAGE_SIZE; + if (dc->line_len != L1_CACHE_BYTES) + panic("DCache line [%d] != kernel Config [%d]", + dc->line_len, L1_CACHE_BYTES); - if (dcache_does_alias && !cache_is_vipt_aliasing()) - panic("Enable CONFIG_ARC_CACHE_VIPT_ALIASING\n"); - else if (!dcache_does_alias && cache_is_vipt_aliasing()) - panic("Don't need CONFIG_ARC_CACHE_VIPT_ALIASING\n"); -#endif + /* check for D-Cache aliasing */ + dcache_does_alias = (dc->sz / dc->assoc) > PAGE_SIZE; - /* Set the default Invalidate Mode to "simpy discard dirty lines" - * as this is more frequent then flush before invalidate - * Ofcourse we toggle this default behviour when desired - */ - temp = read_aux_reg(ARC_REG_DC_CTRL); - temp &= ~DC_CTRL_INV_MODE_FLUSH; - -#ifdef CONFIG_ARC_HAS_DCACHE - /* Enable D-Cache: Clear Bit 0 */ - write_aux_reg(ARC_REG_DC_CTRL, temp & ~IC_CTRL_CACHE_DISABLE); -#else - /* Flush D cache */ - write_aux_reg(ARC_REG_DC_FLSH, 0x1); - /* Disable D cache */ - write_aux_reg(ARC_REG_DC_CTRL, temp | IC_CTRL_CACHE_DISABLE); + if (dcache_does_alias && !cache_is_vipt_aliasing()) + panic("Enable CONFIG_ARC_CACHE_VIPT_ALIASING\n"); + else if (!dcache_does_alias && cache_is_vipt_aliasing()) + panic("Don't need CONFIG_ARC_CACHE_VIPT_ALIASING\n"); + } #endif - - return; } #define OP_INV 0x1 |