summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/boot/dts/Makefile10
-rw-r--r--arch/arm/boot/dts/imx25-karo-tx25.dts30
-rw-r--r--arch/arm/boot/dts/imx25-pdk.dts36
-rw-r--r--arch/arm/boot/dts/imx25.dtsi2
-rw-r--r--arch/arm/boot/dts/imx27-apf27.dts82
-rw-r--r--arch/arm/boot/dts/imx27-pdk.dts (renamed from arch/arm/boot/dts/imx27-3ds.dts)24
-rw-r--r--arch/arm/boot/dts/imx31-bug.dts12
-rw-r--r--arch/arm/boot/dts/imx51-apf51.dts52
-rw-r--r--arch/arm/boot/dts/imx51-babbage.dts478
-rw-r--r--arch/arm/boot/dts/imx51.dtsi53
-rw-r--r--arch/arm/boot/dts/imx53-ard.dts126
-rw-r--r--arch/arm/boot/dts/imx53-evk.dts194
-rw-r--r--arch/arm/boot/dts/imx53-mba53.dts130
-rw-r--r--arch/arm/boot/dts/imx53-qsb.dts380
-rw-r--r--arch/arm/boot/dts/imx53-smd.dts294
-rw-r--r--arch/arm/boot/dts/imx53-tqma53.dtsi172
-rw-r--r--arch/arm/boot/dts/imx53.dtsi68
-rw-r--r--arch/arm/boot/dts/imx6dl.dtsi59
-rw-r--r--arch/arm/boot/dts/imx6q-arm2.dts124
-rw-r--r--arch/arm/boot/dts/imx6q-sabreauto.dts64
-rw-r--r--arch/arm/boot/dts/imx6q-sabrelite.dts216
-rw-r--r--arch/arm/boot/dts/imx6q-sabresd.dts102
-rw-r--r--arch/arm/boot/dts/imx6q.dtsi796
-rw-r--r--arch/arm/boot/dts/imx6qdl.dtsi800
-rw-r--r--arch/arm/mach-imx/clk-imx51-imx53.c4
-rw-r--r--arch/arm/mach-imx/clk-imx6q.c26
-rw-r--r--arch/arm/mach-imx/mach-imx6q.c65
27 files changed, 2516 insertions, 1883 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 411ab1614a0..e007134cc2c 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -80,9 +80,17 @@ dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \
armada-370-mirabox.dtb \
armada-xp-db.dtb \
armada-xp-openblocks-ax3-4.dtb
-dtb-$(CONFIG_ARCH_MXC) += imx51-babbage.dtb \
+dtb-$(CONFIG_ARCH_MXC) += \
+ imx25-karo-tx25.dtb \
+ imx25-pdk.dtb \
+ imx27-apf27.dtb \
+ imx27-pdk.dtb \
+ imx31-bug.dtb \
+ imx51-apf51.dtb \
+ imx51-babbage.dtb \
imx53-ard.dtb \
imx53-evk.dtb \
+ imx53-mba53.dtb \
imx53-qsb.dtb \
imx53-smd.dtb \
imx6q-arm2.dtb \
diff --git a/arch/arm/boot/dts/imx25-karo-tx25.dts b/arch/arm/boot/dts/imx25-karo-tx25.dts
index d81f8a0b979..1a9d0491cdc 100644
--- a/arch/arm/boot/dts/imx25-karo-tx25.dts
+++ b/arch/arm/boot/dts/imx25-karo-tx25.dts
@@ -19,26 +19,18 @@
memory {
reg = <0x80000000 0x02000000 0x90000000 0x02000000>;
};
+};
- soc {
- aips@43f00000 {
- uart1: serial@43f90000 {
- status = "okay";
- };
- };
+&uart1 {
+ status = "okay";
+};
- spba@50000000 {
- fec: ethernet@50038000 {
- status = "okay";
- phy-mode = "rmii";
- };
- };
+&fec {
+ phy-mode = "rmii";
+ status = "okay";
+};
- emi@80000000 {
- nand@bb000000 {
- nand-on-flash-bbt;
- status = "okay";
- };
- };
- };
+&nfc {
+ nand-on-flash-bbt;
+ status = "okay";
};
diff --git a/arch/arm/boot/dts/imx25-pdk.dts b/arch/arm/boot/dts/imx25-pdk.dts
new file mode 100644
index 00000000000..a02a860afd1
--- /dev/null
+++ b/arch/arm/boot/dts/imx25-pdk.dts
@@ -0,0 +1,36 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx25.dtsi"
+
+/ {
+ model = "Freescale i.MX25 Product Development Kit";
+ compatible = "fsl,imx25-pdk", "fsl,imx25";
+
+ memory {
+ reg = <0x80000000 0x4000000>;
+ };
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&fec {
+ phy-mode = "rmii";
+ status = "okay";
+};
+
+&nfc {
+ nand-on-flash-bbt;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi
index e1b13ebc96d..94f33059158 100644
--- a/arch/arm/boot/dts/imx25.dtsi
+++ b/arch/arm/boot/dts/imx25.dtsi
@@ -499,7 +499,7 @@
reg = <0x80000000 0x3b002000>;
ranges;
- nand@bb000000 {
+ nfc: nand@bb000000 {
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm/boot/dts/imx27-apf27.dts b/arch/arm/boot/dts/imx27-apf27.dts
index c0327c054de..b464c807d8d 100644
--- a/arch/arm/boot/dts/imx27-apf27.dts
+++ b/arch/arm/boot/dts/imx27-apf27.dts
@@ -32,58 +32,54 @@
clock-frequency = <0>;
};
};
+};
- soc {
- aipi@10000000 {
- serial@1000a000 {
- status = "okay";
- };
+&uart1 {
+ status = "okay";
+};
- ethernet@1002b000 {
- status = "okay";
- };
- };
+&fec {
+ status = "okay";
+};
- nand@d8000000 {
- status = "okay";
- nand-bus-width = <16>;
- nand-ecc-mode = "hw";
- nand-on-flash-bbt;
+&nfc {
+ status = "okay";
+ nand-bus-width = <16>;
+ nand-ecc-mode = "hw";
+ nand-on-flash-bbt;
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x100000>;
- };
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x100000>;
+ };
- partition@100000 {
- label = "env";
- reg = <0x100000 0x80000>;
- };
+ partition@100000 {
+ label = "env";
+ reg = <0x100000 0x80000>;
+ };
- partition@180000 {
- label = "env2";
- reg = <0x180000 0x80000>;
- };
+ partition@180000 {
+ label = "env2";
+ reg = <0x180000 0x80000>;
+ };
- partition@200000 {
- label = "firmware";
- reg = <0x200000 0x80000>;
- };
+ partition@200000 {
+ label = "firmware";
+ reg = <0x200000 0x80000>;
+ };
- partition@280000 {
- label = "dtb";
- reg = <0x280000 0x80000>;
- };
+ partition@280000 {
+ label = "dtb";
+ reg = <0x280000 0x80000>;
+ };
- partition@300000 {
- label = "kernel";
- reg = <0x300000 0x500000>;
- };
+ partition@300000 {
+ label = "kernel";
+ reg = <0x300000 0x500000>;
+ };
- partition@800000 {
- label = "rootfs";
- reg = <0x800000 0xf800000>;
- };
- };
+ partition@800000 {
+ label = "rootfs";
+ reg = <0x800000 0xf800000>;
};
};
diff --git a/arch/arm/boot/dts/imx27-3ds.dts b/arch/arm/boot/dts/imx27-pdk.dts
index fa04c7b18bc..41cd1105608 100644
--- a/arch/arm/boot/dts/imx27-3ds.dts
+++ b/arch/arm/boot/dts/imx27-pdk.dts
@@ -13,25 +13,19 @@
/include/ "imx27.dtsi"
/ {
- model = "mx27_3ds";
- compatible = "freescale,imx27-3ds", "fsl,imx27";
+ model = "Freescale i.MX27 Product Development Kit";
+ compatible = "fsl,imx27-pdk", "fsl,imx27";
memory {
reg = <0x0 0x0>;
};
+};
- soc {
- aipi@10000000 { /* aipi1 */
- uart1: serial@1000a000 {
- fsl,uart-has-rtscts;
- status = "okay";
- };
- };
+&uart1 {
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
- aipi@10020000 { /* aipi2 */
- ethernet@1002b000 {
- status = "okay";
- };
- };
- };
+&fec {
+ status = "okay";
};
diff --git a/arch/arm/boot/dts/imx31-bug.dts b/arch/arm/boot/dts/imx31-bug.dts
index 7f67402328d..9ac6f6ba1d6 100644
--- a/arch/arm/boot/dts/imx31-bug.dts
+++ b/arch/arm/boot/dts/imx31-bug.dts
@@ -19,13 +19,9 @@
memory {
reg = <0x80000000 0x8000000>; /* 128M */
};
+};
- soc {
- aips@43f00000 { /* AIPS1 */
- uart5: serial@43fb4000 {
- fsl,uart-has-rtscts;
- status = "okay";
- };
- };
- };
+&uart5 {
+ fsl,uart-has-rtscts;
+ status = "okay";
};
diff --git a/arch/arm/boot/dts/imx51-apf51.dts b/arch/arm/boot/dts/imx51-apf51.dts
new file mode 100644
index 00000000000..92d3a66a69e
--- /dev/null
+++ b/arch/arm/boot/dts/imx51-apf51.dts
@@ -0,0 +1,52 @@
+/*
+ * Copyright 2012 Armadeus Systems - <support@armadeus.com>
+ * Copyright 2012 Laurent Cans <laurent.cans@gmail.com>
+ *
+ * Based on mx51-babbage.dts
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx51.dtsi"
+
+/ {
+ model = "Armadeus Systems APF51 module";
+ compatible = "armadeus,imx51-apf51", "fsl,imx51";
+
+ memory {
+ reg = <0x90000000 0x20000000>;
+ };
+
+ clocks {
+ ckih1 {
+ clock-frequency = <0>;
+ };
+
+ osc {
+ clock-frequency = <33554432>;
+ };
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec_2>;
+ phy-mode = "mii";
+ phy-reset-gpios = <&gpio3 0 0>;
+ phy-reset-duration = <1>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3_2>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index 567e7ee72f9..aab6e43219a 100644
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -21,239 +21,20 @@
reg = <0x90000000 0x20000000>;
};
- soc {
- display@di0 {
- compatible = "fsl,imx-parallel-display";
- crtcs = <&ipu 0>;
- interface-pix-fmt = "rgb24";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ipu_disp1_1>;
- };
-
- display@di1 {
- compatible = "fsl,imx-parallel-display";
- crtcs = <&ipu 1>;
- interface-pix-fmt = "rgb565";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ipu_disp2_1>;
- };
-
- aips@70000000 { /* aips-1 */
- spba@70000000 {
- esdhc@70004000 { /* ESDHC1 */
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc1_1>;
- fsl,cd-controller;
- fsl,wp-controller;
- status = "okay";
- };
-
- esdhc@70008000 { /* ESDHC2 */
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc2_1>;
- cd-gpios = <&gpio1 6 0>;
- wp-gpios = <&gpio1 5 0>;
- status = "okay";
- };
-
- uart3: serial@7000c000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart3_1>;
- fsl,uart-has-rtscts;
- status = "okay";
- };
-
- ecspi@70010000 { /* ECSPI1 */
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ecspi1_1>;
- fsl,spi-num-chipselects = <2>;
- cs-gpios = <&gpio4 24 0>, <&gpio4 25 0>;
- status = "okay";
-
- pmic: mc13892@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,mc13892";
- spi-max-frequency = <6000000>;
- reg = <0>;
- interrupt-parent = <&gpio1>;
- interrupts = <8 0x4>;
-
- regulators {
- sw1_reg: sw1 {
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <1375000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- sw2_reg: sw2 {
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <1850000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- sw3_reg: sw3 {
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1850000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- sw4_reg: sw4 {
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1850000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- vpll_reg: vpll {
- regulator-min-microvolt = <1050000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- vdig_reg: vdig {
- regulator-min-microvolt = <1650000>;
- regulator-max-microvolt = <1650000>;
- regulator-boot-on;
- };
-
- vsd_reg: vsd {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3150000>;
- };
-
- vusb2_reg: vusb2 {
- regulator-min-microvolt = <2400000>;
- regulator-max-microvolt = <2775000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- vvideo_reg: vvideo {
- regulator-min-microvolt = <2775000>;
- regulator-max-microvolt = <2775000>;
- };
-
- vaudio_reg: vaudio {
- regulator-min-microvolt = <2300000>;
- regulator-max-microvolt = <3000000>;
- };
-
- vcam_reg: vcam {
- regulator-min-microvolt = <2500000>;
- regulator-max-microvolt = <3000000>;
- };
-
- vgen1_reg: vgen1 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- vgen2_reg: vgen2 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <3150000>;
- regulator-always-on;
- };
-
- vgen3_reg: vgen3 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2900000>;
- regulator-always-on;
- };
- };
- };
-
- flash: at45db321d@1 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash";
- spi-max-frequency = <25000000>;
- reg = <1>;
-
- partition@0 {
- label = "U-Boot";
- reg = <0x0 0x40000>;
- read-only;
- };
-
- partition@40000 {
- label = "Kernel";
- reg = <0x40000 0x3c0000>;
- };
- };
- };
-
- ssi2: ssi@70014000 {
- fsl,mode = "i2s-slave";
- status = "okay";
- };
- };
-
- iomuxc@73fa8000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_hog>;
-
- hog {
- pinctrl_hog: hoggrp {
- fsl,pins = <
- 694 0x20d5 /* MX51_PAD_GPIO1_0__SD1_CD */
- 697 0x20d5 /* MX51_PAD_GPIO1_1__SD1_WP */
- 737 0x100 /* MX51_PAD_GPIO1_5__GPIO1_5 */
- 740 0x100 /* MX51_PAD_GPIO1_6__GPIO1_6 */
- 121 0x5 /* MX51_PAD_EIM_A27__GPIO2_21 */
- 402 0x85 /* MX51_PAD_CSPI1_SS0__GPIO4_24 */
- 405 0x85 /* MX51_PAD_CSPI1_SS1__GPIO4_25 */
- >;
- };
- };
- };
-
- uart1: serial@73fbc000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1_1>;
- fsl,uart-has-rtscts;
- status = "okay";
- };
-
- uart2: serial@73fc0000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2_1>;
- status = "okay";
- };
- };
-
- aips@80000000 { /* aips-2 */
- i2c@83fc4000 { /* I2C2 */
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2_1>;
- status = "okay";
-
- sgtl5000: codec@0a {
- compatible = "fsl,sgtl5000";
- reg = <0x0a>;
- clock-frequency = <26000000>;
- VDDA-supply = <&vdig_reg>;
- VDDIO-supply = <&vvideo_reg>;
- };
- };
-
- audmux@83fd0000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_audmux_1>;
- status = "okay";
- };
+ display@di0 {
+ compatible = "fsl,imx-parallel-display";
+ crtcs = <&ipu 0>;
+ interface-pix-fmt = "rgb24";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ipu_disp1_1>;
+ };
- ethernet@83fec000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fec_1>;
- phy-mode = "mii";
- status = "okay";
- };
- };
+ display@di1 {
+ compatible = "fsl,imx-parallel-display";
+ crtcs = <&ipu 1>;
+ interface-pix-fmt = "rgb565";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ipu_disp2_1>;
};
gpio-keys {
@@ -281,3 +62,236 @@
mux-ext-port = <3>;
};
};
+
+&esdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1_1>;
+ fsl,cd-controller;
+ fsl,wp-controller;
+ status = "okay";
+};
+
+&esdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc2_1>;
+ cd-gpios = <&gpio1 6 0>;
+ wp-gpios = <&gpio1 5 0>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3_1>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
+
+&ecspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1_1>;
+ fsl,spi-num-chipselects = <2>;
+ cs-gpios = <&gpio4 24 0>, <&gpio4 25 0>;
+ status = "okay";
+
+ pmic: mc13892@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mc13892";
+ spi-max-frequency = <6000000>;
+ reg = <0>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <8 0x4>;
+
+ regulators {
+ sw1_reg: sw1 {
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1375000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3_reg: sw3 {
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw4_reg: sw4 {
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vpll_reg: vpll {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vdig_reg: vdig {
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <1650000>;
+ regulator-boot-on;
+ };
+
+ vsd_reg: vsd {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3150000>;
+ };
+
+ vusb2_reg: vusb2 {
+ regulator-min-microvolt = <2400000>;
+ regulator-max-microvolt = <2775000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vvideo_reg: vvideo {
+ regulator-min-microvolt = <2775000>;
+ regulator-max-microvolt = <2775000>;
+ };
+
+ vaudio_reg: vaudio {
+ regulator-min-microvolt = <2300000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ vcam_reg: vcam {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ vgen1_reg: vgen1 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ vgen2_reg: vgen2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3150000>;
+ regulator-always-on;
+ };
+
+ vgen3_reg: vgen3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2900000>;
+ regulator-always-on;
+ };
+ };
+ };
+
+ flash: at45db321d@1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash";
+ spi-max-frequency = <25000000>;
+ reg = <1>;
+
+ partition@0 {
+ label = "U-Boot";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "Kernel";
+ reg = <0x40000 0x3c0000>;
+ };
+ };
+};
+
+&ssi2 {
+ fsl,mode = "i2s-slave";
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ hog {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ 694 0x20d5 /* MX51_PAD_GPIO1_0__SD1_CD */
+ 697 0x20d5 /* MX51_PAD_GPIO1_1__SD1_WP */
+ 737 0x100 /* MX51_PAD_GPIO1_5__GPIO1_5 */
+ 740 0x100 /* MX51_PAD_GPIO1_6__GPIO1_6 */
+ 121 0x5 /* MX51_PAD_EIM_A27__GPIO2_21 */
+ 402 0x85 /* MX51_PAD_CSPI1_SS0__GPIO4_24 */
+ 405 0x85 /* MX51_PAD_CSPI1_SS1__GPIO4_25 */
+ >;
+ };
+ };
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_1>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2_1>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2_1>;
+ status = "okay";
+
+ sgtl5000: codec@0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ clock-frequency = <26000000>;
+ VDDA-supply = <&vdig_reg>;
+ VDDIO-supply = <&vvideo_reg>;
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux_1>;
+ status = "okay";
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec_1>;
+ phy-mode = "mii";
+ status = "okay";
+};
+
+&kpp {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_kpp_1>;
+ linux,keymap = <0x00000067 /* KEY_UP */
+ 0x0001006c /* KEY_DOWN */
+ 0x00020072 /* KEY_VOLUMEDOWN */
+ 0x00030066 /* KEY_HOME */
+ 0x0100006a /* KEY_RIGHT */
+ 0x01010069 /* KEY_LEFT */
+ 0x0102001c /* KEY_ENTER */
+ 0x01030073 /* KEY_VOLUMEUP */
+ 0x02000040 /* KEY_F6 */
+ 0x02010042 /* KEY_F8 */
+ 0x02020043 /* KEY_F9 */
+ 0x02030044 /* KEY_F10 */
+ 0x0300003b /* KEY_F1 */
+ 0x0301003c /* KEY_F2 */
+ 0x0302003d /* KEY_F3 */
+ 0x03030074>; /* KEY_POWER */
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index 1f5d45eff45..fcf035bf7c5 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -221,6 +221,14 @@
#interrupt-cells = <2>;
};
+ kpp: kpp@73f94000 {
+ compatible = "fsl,imx51-kpp", "fsl,imx21-kpp";
+ reg = <0x73f94000 0x4000>;
+ interrupts = <60>;
+ clocks = <&clks 0>;
+ status = "disabled";
+ };
+
wdog1: wdog@73f98000 {
compatible = "fsl,imx51-wdt", "fsl,imx21-wdt";
reg = <0x73f98000 0x4000>;
@@ -273,6 +281,29 @@
260 0x80000000 /* MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK */
>;
};
+
+ pinctrl_fec_2: fecgrp-2 {
+ fsl,pins = <
+ 589 0x80000000 /* MX51_PAD_DI_GP3__FEC_TX_ER */
+ 592 0x80000000 /* MX51_PAD_DI2_PIN4__FEC_CRS */
+ 594 0x80000000 /* MX51_PAD_DI2_PIN2__FEC_MDC */
+ 596 0x80000000 /* MX51_PAD_DI2_PIN3__FEC_MDIO */
+ 598 0x80000000 /* MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 */
+ 602 0x80000000 /* MX51_PAD_DI_GP4__FEC_RDATA2 */
+ 604 0x80000000 /* MX51_PAD_DISP2_DAT0__FEC_RDATA3 */
+ 609 0x80000000 /* MX51_PAD_DISP2_DAT1__FEC_RX_ER */
+ 618 0x80000000 /* MX51_PAD_DISP2_DAT6__FEC_TDATA1 */
+ 623 0x80000000 /* MX51_PAD_DISP2_DAT7__FEC_TDATA2 */
+ 628 0x80000000 /* MX51_PAD_DISP2_DAT8__FEC_TDATA3 */
+ 634 0x80000000 /* MX51_PAD_DISP2_DAT9__FEC_TX_EN */
+ 639 0x80000000 /* MX51_PAD_DISP2_DAT10__FEC_COL */
+ 644 0x80000000 /* MX51_PAD_DISP2_DAT11__FEC_RX_CLK */
+ 649 0x80000000 /* MX51_PAD_DISP2_DAT12__FEC_RX_DV */
+ 653 0x80000000 /* MX51_PAD_DISP2_DAT13__FEC_TX_CLK */
+ 657 0x80000000 /* MX51_PAD_DISP2_DAT14__FEC_RDATA0 */
+ 662 0x80000000 /* MX51_PAD_DISP2_DAT15__FEC_TDATA0 */
+ >;
+ };
};
ecspi1 {
@@ -409,6 +440,28 @@
49 0x1c5 /* MX51_PAD_EIM_D24__UART3_CTS */
>;
};
+
+ pinctrl_uart3_2: uart3grp-2 {
+ fsl,pins = <
+ 434 0x1c5 /* MX51_PAD_UART3_RXD__UART3_RXD */
+ 430 0x1c5 /* MX51_PAD_UART3_TXD__UART3_TXD */
+ >;
+ };
+ };
+
+ kpp {
+ pinctrl_kpp_1: kppgrp-1 {
+ fsl,pins = <
+ 438 0xe0 /* MX51_PAD_KEY_ROW0__KEY_ROW0 */
+ 439 0xe0 /* MX51_PAD_KEY_ROW1__KEY_ROW1 */
+ 440 0xe0 /* MX51_PAD_KEY_ROW2__KEY_ROW2 */
+ 441 0xe0 /* MX51_PAD_KEY_ROW3__KEY_ROW3 */
+ 442 0xe8 /* MX51_PAD_KEY_COL0__KEY_COL0 */
+ 444 0xe8 /* MX51_PAD_KEY_COL1__KEY_COL1 */
+ 446 0xe8 /* MX51_PAD_KEY_COL2__KEY_COL2 */
+ 448 0xe8 /* MX51_PAD_KEY_COL3__KEY_COL3 */
+ >;
+ };
};
};
diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts
index 4be76f22352..e049fd0319e 100644
--- a/arch/arm/boot/dts/imx53-ard.dts
+++ b/arch/arm/boot/dts/imx53-ard.dts
@@ -21,72 +21,6 @@
reg = <0x70000000 0x40000000>;
};
- soc {
- aips@50000000 { /* AIPS1 */
- spba@50000000 {
- esdhc@50004000 { /* ESDHC1 */
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc1_2>;
- cd-gpios = <&gpio1 1 0>;
- wp-gpios = <&gpio1 9 0>;
- status = "okay";
- };
- };
-
- iomuxc@53fa8000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_hog>;
-
- hog {
- pinctrl_hog: hoggrp {
- fsl,pins = <
- 1077 0x80000000 /* MX53_PAD_GPIO_1__GPIO1_1 */
- 1085 0x80000000 /* MX53_PAD_GPIO_9__GPIO1_9 */
- 486 0x80000000 /* MX53_PAD_EIM_EB3__GPIO2_31 */
- 739 0x80000000 /* MX53_PAD_GPIO_10__GPIO4_0 */
- 218 0x80000000 /* MX53_PAD_DISP0_DAT16__GPIO5_10 */
- 226 0x80000000 /* MX53_PAD_DISP0_DAT17__GPIO5_11 */
- 233 0x80000000 /* MX53_PAD_DISP0_DAT18__GPIO5_12 */
- 241 0x80000000 /* MX53_PAD_DISP0_DAT19__GPIO5_13 */
- 429 0x80000000 /* MX53_PAD_EIM_D16__EMI_WEIM_D_16 */
- 435 0x80000000 /* MX53_PAD_EIM_D17__EMI_WEIM_D_17 */
- 441 0x80000000 /* MX53_PAD_EIM_D18__EMI_WEIM_D_18 */
- 448 0x80000000 /* MX53_PAD_EIM_D19__EMI_WEIM_D_19 */
- 456 0x80000000 /* MX53_PAD_EIM_D20__EMI_WEIM_D_20 */
- 464 0x80000000 /* MX53_PAD_EIM_D21__EMI_WEIM_D_21 */
- 471 0x80000000 /* MX53_PAD_EIM_D22__EMI_WEIM_D_22 */
- 477 0x80000000 /* MX53_PAD_EIM_D23__EMI_WEIM_D_23 */
- 492 0x80000000 /* MX53_PAD_EIM_D24__EMI_WEIM_D_24 */
- 500 0x80000000 /* MX53_PAD_EIM_D25__EMI_WEIM_D_25 */
- 508 0x80000000 /* MX53_PAD_EIM_D26__EMI_WEIM_D_26 */
- 516 0x80000000 /* MX53_PAD_EIM_D27__EMI_WEIM_D_27 */
- 524 0x80000000 /* MX53_PAD_EIM_D28__EMI_WEIM_D_28 */
- 532 0x80000000 /* MX53_PAD_EIM_D29__EMI_WEIM_D_29 */
- 540 0x80000000 /* MX53_PAD_EIM_D30__EMI_WEIM_D_30 */
- 548 0x80000000 /* MX53_PAD_EIM_D31__EMI_WEIM_D_31 */
- 637 0x80000000 /* MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 */
- 642 0x80000000 /* MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 */
- 647 0x80000000 /* MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 */
- 652 0x80000000 /* MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 */
- 657 0x80000000 /* MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 */
- 662 0x80000000 /* MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 */
- 667 0x80000000 /* MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 */
- 611 0x80000000 /* MX53_PAD_EIM_OE__EMI_WEIM_OE */
- 616 0x80000000 /* MX53_PAD_EIM_RW__EMI_WEIM_RW */
- 607 0x80000000 /* MX53_PAD_EIM_CS1__EMI_WEIM_CS_1 */
- >;
- };
- };
- };
-
- uart1: serial@53fbc000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1_2>;
- status = "okay";
- };
- };
- };
-
eim-cs1@f4000000 {
#address-cells = <1>;
#size-cells = <1>;
@@ -162,3 +96,63 @@
};
};
};
+
+&esdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1_2>;
+ cd-gpios = <&gpio1 1 0>;
+ wp-gpios = <&gpio1 9 0>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ hog {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ 1077 0x80000000 /* MX53_PAD_GPIO_1__GPIO1_1 */
+ 1085 0x80000000 /* MX53_PAD_GPIO_9__GPIO1_9 */
+ 486 0x80000000 /* MX53_PAD_EIM_EB3__GPIO2_31 */
+ 739 0x80000000 /* MX53_PAD_GPIO_10__GPIO4_0 */
+ 218 0x80000000 /* MX53_PAD_DISP0_DAT16__GPIO5_10 */
+ 226 0x80000000 /* MX53_PAD_DISP0_DAT17__GPIO5_11 */
+ 233 0x80000000 /* MX53_PAD_DISP0_DAT18__GPIO5_12 */
+ 241 0x80000000 /* MX53_PAD_DISP0_DAT19__GPIO5_13 */
+ 429 0x80000000 /* MX53_PAD_EIM_D16__EMI_WEIM_D_16 */
+ 435 0x80000000 /* MX53_PAD_EIM_D17__EMI_WEIM_D_17 */
+ 441 0x80000000 /* MX53_PAD_EIM_D18__EMI_WEIM_D_18 */
+ 448 0x80000000 /* MX53_PAD_EIM_D19__EMI_WEIM_D_19 */
+ 456 0x80000000 /* MX53_PAD_EIM_D20__EMI_WEIM_D_20 */
+ 464 0x80000000 /* MX53_PAD_EIM_D21__EMI_WEIM_D_21 */
+ 471 0x80000000 /* MX53_PAD_EIM_D22__EMI_WEIM_D_22 */
+ 477 0x80000000 /* MX53_PAD_EIM_D23__EMI_WEIM_D_23 */
+ 492 0x80000000 /* MX53_PAD_EIM_D24__EMI_WEIM_D_24 */
+ 500 0x80000000 /* MX53_PAD_EIM_D25__EMI_WEIM_D_25 */
+ 508 0x80000000 /* MX53_PAD_EIM_D26__EMI_WEIM_D_26 */
+ 516 0x80000000 /* MX53_PAD_EIM_D27__EMI_WEIM_D_27 */
+ 524 0x80000000 /* MX53_PAD_EIM_D28__EMI_WEIM_D_28 */
+ 532 0x80000000 /* MX53_PAD_EIM_D29__EMI_WEIM_D_29 */
+ 540 0x80000000 /* MX53_PAD_EIM_D30__EMI_WEIM_D_30 */
+ 548 0x80000000 /* MX53_PAD_EIM_D31__EMI_WEIM_D_31 */
+ 637 0x80000000 /* MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 */
+ 642 0x80000000 /* MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 */
+ 647 0x80000000 /* MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 */
+ 652 0x80000000 /* MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 */
+ 657 0x80000000 /* MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 */
+ 662 0x80000000 /* MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 */
+ 667 0x80000000 /* MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 */
+ 611 0x80000000 /* MX53_PAD_EIM_OE__EMI_WEIM_OE */
+ 616 0x80000000 /* MX53_PAD_EIM_RW__EMI_WEIM_RW */
+ 607 0x80000000 /* MX53_PAD_EIM_CS1__EMI_WEIM_CS_1 */
+ >;
+ };
+ };
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_2>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx53-evk.dts b/arch/arm/boot/dts/imx53-evk.dts
index a124d1e2525..85a89b52f9b 100644
--- a/arch/arm/boot/dts/imx53-evk.dts
+++ b/arch/arm/boot/dts/imx53-evk.dts
@@ -21,107 +21,6 @@
reg = <0x70000000 0x80000000>;
};
- soc {
- aips@50000000 { /* AIPS1 */
- spba@50000000 {
- esdhc@50004000 { /* ESDHC1 */
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc1_1>;
- cd-gpios = <&gpio3 13 0>;
- wp-gpios = <&gpio3 14 0>;
- status = "okay";
- };
-
- ecspi@50010000 { /* ECSPI1 */
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ecspi1_1>;
- fsl,spi-num-chipselects = <2>;
- cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>;
- status = "okay";
-
- flash: at45db321d@1 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash";
- spi-max-frequency = <25000000>;
- reg = <1>;
-
- partition@0 {
- label = "U-Boot";
- reg = <0x0 0x40000>;
- read-only;
- };
-
- partition@40000 {
- label = "Kernel";
- reg = <0x40000 0x3c0000>;
- };
- };
- };
-
- esdhc@50020000 { /* ESDHC3 */
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc3_1>;
- cd-gpios = <&gpio3 11 0>;
- wp-gpios = <&gpio3 12 0>;
- status = "okay";
- };
- };
-
- iomuxc@53fa8000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_hog>;
-
- hog {
- pinctrl_hog: hoggrp {
- fsl,pins = <
- 424 0x80000000 /* MX53_PAD_EIM_EB2__GPIO2_30 */
- 449 0x80000000 /* MX53_PAD_EIM_D19__GPIO3_19 */
- 693 0x80000000 /* MX53_PAD_EIM_DA11__GPIO3_11 */
- 697 0x80000000 /* MX53_PAD_EIM_DA12__GPIO3_12 */
- 701 0x80000000 /* MX53_PAD_EIM_DA13__GPIO3_13 */
- 705 0x80000000 /* MX53_PAD_EIM_DA14__GPIO3_14 */
- 868 0x80000000 /* MX53_PAD_PATA_DA_0__GPIO7_6 */
- 873 0x80000000 /* MX53_PAD_PATA_DA_1__GPIO7_7 */
- >;
- };
- };
- };
-
- uart1: serial@53fbc000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1_1>;
- status = "okay";
- };
- };
-
- aips@60000000 { /* AIPS2 */
- i2c@63fc4000 { /* I2C2 */
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2_1>;
- status = "okay";
-
- pmic: mc13892@08 {
- compatible = "fsl,mc13892", "fsl,mc13xxx";
- reg = <0x08>;
- };
-
- codec: sgtl5000@0a {
- compatible = "fsl,sgtl5000";
- reg = <0x0a>;
- };
- };
-
- ethernet@63fec000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fec_1>;
- phy-mode = "rmii";
- phy-reset-gpios = <&gpio7 6 0>;
- status = "okay";
- };
- };
- };
-
leds {
compatible = "gpio-leds";
@@ -132,3 +31,96 @@
};
};
};
+
+&esdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1_1>;
+ cd-gpios = <&gpio3 13 0>;
+ wp-gpios = <&gpio3 14 0>;
+ status = "okay";
+};
+
+&ecspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1_1>;
+ fsl,spi-num-chipselects = <2>;
+ cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>;
+ status = "okay";
+
+ flash: at45db321d@1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash";
+ spi-max-frequency = <25000000>;
+ reg = <1>;
+
+ partition@0 {
+ label = "U-Boot";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "Kernel";
+ reg = <0x40000 0x3c0000>;
+ };
+ };
+};
+
+&esdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc3_1>;
+ cd-gpios = <&gpio3 11 0>;
+ wp-gpios = <&gpio3 12 0>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ hog {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ 424 0x80000000 /* MX53_PAD_EIM_EB2__GPIO2_30 */
+ 449 0x80000000 /* MX53_PAD_EIM_D19__GPIO3_19 */
+ 693 0x80000000 /* MX53_PAD_EIM_DA11__GPIO3_11 */
+ 697 0x80000000 /* MX53_PAD_EIM_DA12__GPIO3_12 */
+ 701 0x80000000 /* MX53_PAD_EIM_DA13__GPIO3_13 */
+ 705 0x80000000 /* MX53_PAD_EIM_DA14__GPIO3_14 */
+ 868 0x80000000 /* MX53_PAD_PATA_DA_0__GPIO7_6 */
+ 873 0x80000000 /* MX53_PAD_PATA_DA_1__GPIO7_7 */
+ >;
+ };
+ };
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_1>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2_1>;
+ status = "okay";
+
+ pmic: mc13892@08 {
+ compatible = "fsl,mc13892", "fsl,mc13xxx";
+ reg = <0x08>;
+ };
+
+ codec: sgtl5000@0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec_1>;
+ phy-mode = "rmii";
+ phy-reset-gpios = <&gpio7 6 0>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx53-mba53.dts b/arch/arm/boot/dts/imx53-mba53.dts
new file mode 100644
index 00000000000..e54fffd4836
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-mba53.dts
@@ -0,0 +1,130 @@
+/*
+ * Copyright 2012 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ * Copyright 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx53-tqma53.dtsi"
+
+/ {
+ model = "TQ MBa53 starter kit";
+ compatible = "tq,mba53", "tq,tqma53", "fsl,imx53";
+};
+
+&iomuxc {
+ lvds1 {
+ pinctrl_lvds1_1: lvds1-grp1 {
+ fsl,pins = <730 0x10000 /* LVDS0_TX3 */
+ 732 0x10000 /* LVDS0_CLK */
+ 734 0x10000 /* LVDS0_TX2 */
+ 736 0x10000 /* LVDS0_TX1 */
+ 738 0x10000>; /* LVDS0_TX0 */
+ };
+
+ pinctrl_lvds1_2: lvds1-grp2 {
+ fsl,pins = <720 0x10000 /* LVDS1_TX3 */
+ 722 0x10000 /* LVDS1_TX2 */
+ 724 0x10000 /* LVDS1_CLK */
+ 726 0x10000 /* LVDS1_TX1 */
+ 728 0x10000>; /* LVDS1_TX0 */
+ };
+ };
+
+ disp1 {
+ pinctrl_disp1_1: disp1-grp1 {
+ fsl,pins = <689 0x10000 /* DISP1_DRDY */
+ 482 0x10000 /* DISP1_HSYNC */
+ 489 0x10000 /* DISP1_VSYNC */
+ 684 0x10000 /* DISP1_DAT_0 */
+ 515 0x10000 /* DISP1_DAT_22 */
+ 523 0x10000 /* DISP1_DAT_23 */
+ 543 0x10000 /* DISP1_DAT_21 */
+ 553 0x10000 /* DISP1_DAT_20 */
+ 558 0x10000 /* DISP1_DAT_19 */
+ 564 0x10000 /* DISP1_DAT_18 */
+ 570 0x10000 /* DISP1_DAT_17 */
+ 575 0x10000 /* DISP1_DAT_16 */
+ 580 0x10000 /* DISP1_DAT_15 */
+ 585 0x10000 /* DISP1_DAT_14 */
+ 590 0x10000 /* DISP1_DAT_13 */
+ 595 0x10000 /* DISP1_DAT_12 */
+ 628 0x10000 /* DISP1_DAT_11 */
+ 634 0x10000 /* DISP1_DAT_10 */
+ 639 0x10000 /* DISP1_DAT_9 */
+ 644 0x10000 /* DISP1_DAT_8 */
+ 649 0x10000 /* DISP1_DAT_7 */
+ 654 0x10000 /* DISP1_DAT_6 */
+ 659 0x10000 /* DISP1_DAT_5 */
+ 664 0x10000 /* DISP1_DAT_4 */
+ 669 0x10000 /* DISP1_DAT_3 */
+ 674 0x10000 /* DISP1_DAT_2 */
+ 679 0x10000 /* DISP1_DAT_1 */
+ 684 0x10000>; /* DISP1_DAT_0 */
+ };
+ };
+};
+
+&cspi {
+ status = "okay";
+};
+
+&i2c2 {
+ codec: sgtl5000@a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ };
+
+ expander: pca9554@20 {
+ compatible = "pca9554";
+ reg = <0x20>;
+ interrupts = <109>;
+ };
+
+ sensor2: lm75@49 {
+ compatible = "lm75";
+ reg = <0x49>;
+ };
+};
+
+&fec {
+ status = "okay";
+};
+
+&esdhc2 {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&ecspi1 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&can1 {
+ status = "okay";
+};
+
+&can2 {
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts
index b0075537195..05cc5620436 100644
--- a/arch/arm/boot/dts/imx53-qsb.dts
+++ b/arch/arm/boot/dts/imx53-qsb.dts
@@ -21,200 +21,6 @@
reg = <0x70000000 0x40000000>;
};
- soc {
- aips@50000000 { /* AIPS1 */
- spba@50000000 {
- esdhc@50004000 { /* ESDHC1 */
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc1_1>;
- cd-gpios = <&gpio3 13 0>;
- status = "okay";
- };
-
- ssi2: ssi@50014000 {
- fsl,mode = "i2s-slave";
- status = "okay";
- };
-
- esdhc@50020000 { /* ESDHC3 */
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc3_1>;
- cd-gpios = <&gpio3 11 0>;
- wp-gpios = <&gpio3 12 0>;
- status = "okay";
- };
- };
-
- iomuxc@53fa8000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_hog>;
-
- hog {
- pinctrl_hog: hoggrp {
- fsl,pins = <
- 1071 0x80000000 /* MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK */
- 1141 0x80000000 /* MX53_PAD_GPIO_8__GPIO1_8 */
- 982 0x80000000 /* MX53_PAD_PATA_DATA14__GPIO2_14 */
- 989 0x80000000 /* MX53_PAD_PATA_DATA15__GPIO2_15 */
- 693 0x80000000 /* MX53_PAD_EIM_DA11__GPIO3_11 */
- 697 0x80000000 /* MX53_PAD_EIM_DA12__GPIO3_12 */
- 701 0x80000000 /* MX53_PAD_EIM_DA13__GPIO3_13 */
- 868 0x80000000 /* MX53_PAD_PATA_DA_0__GPIO7_6 */
- 1149 0x80000000 /* MX53_PAD_GPIO_16__GPIO7_11 */
- >;
- };
-
- led_pin_gpio7_7: led_gpio7_7@0 {
- fsl,pins = <
- 873 0x80000000 /* MX53_PAD_PATA_DA_1__GPIO7_7 */
- >;
- };
- };
-
- };
-
- uart1: serial@53fbc000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1_1>;
- status = "okay";
- };
- };
-
- aips@60000000 { /* AIPS2 */
- i2c@63fc4000 { /* I2C2 */
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2_1>;
- status = "okay";
-
- sgtl5000: codec@0a {
- compatible = "fsl,sgtl5000";
- reg = <0x0a>;
- VDDA-supply = <&reg_3p2v>;
- VDDIO-supply = <&reg_3p2v>;
- };
- };
-
- i2c@63fc8000 { /* I2C1 */
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c1_1>;
- status = "okay";
-
- accelerometer: mma8450@1c {
- compatible = "fsl,mma8450";
- reg = <0x1c>;
- };
-
- pmic: dialog@48 {
- compatible = "dlg,da9053-aa", "dlg,da9052";
- reg = <0x48>;
- interrupt-parent = <&gpio7>;
- interrupts = <11 0x8>; /* low-level active IRQ at GPIO7_11 */
-
- regulators {
- buck1_reg: buck1 {
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <2075000>;
- regulator-always-on;
- };
-
- buck2_reg: buck2 {
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <2075000>;
- regulator-always-on;
- };
-
- buck3_reg: buck3 {
- regulator-min-microvolt = <925000>;
- regulator-max-microvolt = <2500000>;
- regulator-always-on;
- };
-
- buck4_reg: buck4 {
- regulator-min-microvolt = <925000>;
- regulator-max-microvolt = <2500000>;
- regulator-always-on;
- };
-
- ldo1_reg: ldo1 {
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo2_reg: ldo2 {
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo3_reg: ldo3 {
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo4_reg: ldo4 {
- regulator-min-microvolt = <1725000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- ldo5_reg: ldo5 {
- regulator-min-microvolt = <1725000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- ldo6_reg: ldo6 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <3600000>;
- regulator-always-on;
- };
-
- ldo7_reg: ldo7 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <3600000>;
- regulator-always-on;
- };
-
- ldo8_reg: ldo8 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <3600000>;
- regulator-always-on;
- };
-
- ldo9_reg: ldo9 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <3600000>;
- regulator-always-on;
- };
-
- ldo10_reg: ldo10 {
- regulator-min-microvolt = <1250000>;
- regulator-max-microvolt = <3650000>;
- regulator-always-on;
- };
- };
- };
- };
-
- audmux@63fd0000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_audmux_1>;
- status = "okay";
- };
-
- ethernet@63fec000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fec_1>;
- phy-mode = "rmii";
- phy-reset-gpios = <&gpio7 6 0>;
- status = "okay";
- };
- };
- };
-
gpio-keys {
compatible = "gpio-keys";
@@ -276,3 +82,189 @@
mux-ext-port = <5>;
};
};
+
+&esdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1_1>;
+ cd-gpios = <&gpio3 13 0>;
+ status = "okay";
+};
+
+&ssi2 {
+ fsl,mode = "i2s-slave";
+ status = "okay";
+};
+
+&esdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc3_1>;
+ cd-gpios = <&gpio3 11 0>;
+ wp-gpios = <&gpio3 12 0>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ hog {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ 1071 0x80000000 /* MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK */
+ 1141 0x80000000 /* MX53_PAD_GPIO_8__GPIO1_8 */
+ 982 0x80000000 /* MX53_PAD_PATA_DATA14__GPIO2_14 */
+ 989 0x80000000 /* MX53_PAD_PATA_DATA15__GPIO2_15 */
+ 693 0x80000000 /* MX53_PAD_EIM_DA11__GPIO3_11 */
+ 697 0x80000000 /* MX53_PAD_EIM_DA12__GPIO3_12 */
+ 701 0x80000000 /* MX53_PAD_EIM_DA13__GPIO3_13 */
+ 868 0x80000000 /* MX53_PAD_PATA_DA_0__GPIO7_6 */
+ 1149 0x80000000 /* MX53_PAD_GPIO_16__GPIO7_11 */
+ >;
+ };
+
+ led_pin_gpio7_7: led_gpio7_7@0 {
+ fsl,pins = <
+ 873 0x80000000 /* MX53_PAD_PATA_DA_1__GPIO7_7 */
+ >;
+ };
+ };
+
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_1>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2_1>;
+ status = "okay";
+
+ sgtl5000: codec@0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ VDDA-supply = <&reg_3p2v>;
+ VDDIO-supply = <&reg_3p2v>;
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1_1>;
+ status = "okay";
+
+ accelerometer: mma8450@1c {
+ compatible = "fsl,mma8450";
+ reg = <0x1c>;
+ };
+
+ pmic: dialog@48 {
+ compatible = "dlg,da9053-aa", "dlg,da9052";
+ reg = <0x48>;
+ interrupt-parent = <&gpio7>;
+ interrupts = <11 0x8>; /* low-level active IRQ at GPIO7_11 */
+
+ regulators {
+ buck1_reg: buck1 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <2075000>;
+ regulator-always-on;
+ };
+
+ buck2_reg: buck2 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <2075000>;
+ regulator-always-on;
+ };
+
+ buck3_reg: buck3 {
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+
+ buck4_reg: buck4 {
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+
+ ldo1_reg: ldo1 {
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo2_reg: ldo2 {
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo3_reg: ldo3 {
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo4_reg: ldo4 {
+ regulator-min-microvolt = <1725000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ ldo5_reg: ldo5 {
+ regulator-min-microvolt = <1725000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ ldo6_reg: ldo6 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-always-on;
+ };
+
+ ldo7_reg: ldo7 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-always-on;
+ };
+
+ ldo8_reg: ldo8 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-always-on;
+ };
+
+ ldo9_reg: ldo9 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-always-on;
+ };
+
+ ldo10_reg: ldo10 {
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <3650000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux_1>;
+ status = "okay";
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec_1>;
+ phy-mode = "rmii";
+ phy-reset-gpios = <&gpio7 6 0>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts
index 06c68580c84..995554c324b 100644
--- a/arch/arm/boot/dts/imx53-smd.dts
+++ b/arch/arm/boot/dts/imx53-smd.dts
@@ -21,157 +21,6 @@
reg = <0x70000000 0x40000000>;
};
- soc {
- aips@50000000 { /* AIPS1 */
- spba@50000000 {
- esdhc@50004000 { /* ESDHC1 */
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc1_1>;
- cd-gpios = <&gpio3 13 0>;
- wp-gpios = <&gpio4 11 0>;
- status = "okay";
- };
-
- esdhc@50008000 { /* ESDHC2 */
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc2_1>;
- non-removable;
- status = "okay";
- };
-
- uart3: serial@5000c000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart3_1>;
- fsl,uart-has-rtscts;
- status = "okay";
- };
-
- ecspi@50010000 { /* ECSPI1 */
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ecspi1_1>;
- fsl,spi-num-chipselects = <2>;
- cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>;
- status = "okay";
-
- zigbee: mc1323@0 {
- compatible = "fsl,mc1323";
- spi-max-frequency = <8000000>;
- reg = <0>;
- };
-
- flash: m25p32@1 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "st,m25p32", "st,m25p";
- spi-max-frequency = <20000000>;
- reg = <1>;
-
- partition@0 {
- label = "U-Boot";
- reg = <0x0 0x40000>;
- read-only;
- };
-
- partition@40000 {
- label = "Kernel";
- reg = <0x40000 0x3c0000>;
- };
- };
- };
-
- esdhc@50020000 { /* ESDHC3 */
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc3_1>;
- non-removable;
- status = "okay";
- };
- };
-
- iomuxc@53fa8000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_hog>;
-
- hog {
- pinctrl_hog: hoggrp {
- fsl,pins = <
- 982 0x80000000 /* MX53_PAD_PATA_DATA14__GPIO2_14 */
- 989 0x80000000 /* MX53_PAD_PATA_DATA15__GPIO2_15 */
- 424 0x80000000 /* MX53_PAD_EIM_EB2__GPIO2_30 */
- 701 0x80000000 /* MX53_PAD_EIM_DA13__GPIO3_13 */
- 449 0x80000000 /* MX53_PAD_EIM_D19__GPIO3_19 */
- 43 0x80000000 /* MX53_PAD_KEY_ROW2__GPIO4_11 */
- 868 0x80000000 /* MX53_PAD_PATA_DA_0__GPIO7_6 */
- >;
- };
- };
- };
-
- uart1: serial@53fbc000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1_1>;
- status = "okay";
- };
-
- uart2: serial@53fc0000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2_1>;
- status = "okay";
- };
- };
-
- aips@60000000 { /* AIPS2 */
- i2c@63fc4000 { /* I2C2 */
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2_1>;
- status = "okay";
-
- codec: sgtl5000@0a {
- compatible = "fsl,sgtl5000";
- reg = <0x0a>;
- };
-
- magnetometer: mag3110@0e {
- compatible = "fsl,mag3110";
- reg = <0x0e>;
- };
-
- touchkey: mpr121@5a {
- compatible = "fsl,mpr121";
- reg = <0x5a>;
- };
- };
-
- i2c@63fc8000 { /* I2C1 */
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c1_1>;
- status = "okay";
-
- accelerometer: mma8450@1c {
- compatible = "fsl,mma8450";
- reg = <0x1c>;
- };
-
- camera: ov5642@3c {
- compatible = "ovti,ov5642";
- reg = <0x3c>;
- };
-
- pmic: dialog@48 {
- compatible = "dialog,da9053", "dialog,da9052";
- reg = <0x48>;
- };
- };
-
- ethernet@63fec000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fec_1>;
- phy-mode = "rmii";
- phy-reset-gpios = <&gpio7 6 0>;
- status = "okay";
- };
- };
- };
-
gpio-keys {
compatible = "gpio-keys";
@@ -188,3 +37,146 @@
};
};
};
+
+&esdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1_1>;
+ cd-gpios = <&gpio3 13 0>;
+ wp-gpios = <&gpio4 11 0>;
+ status = "okay";
+};
+
+&esdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc2_1>;
+ non-removable;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3_1>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
+
+&ecspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1_1>;
+ fsl,spi-num-chipselects = <2>;
+ cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>;
+ status = "okay";
+
+ zigbee: mc1323@0 {
+ compatible = "fsl,mc1323";
+ spi-max-frequency = <8000000>;
+ reg = <0>;
+ };
+
+ flash: m25p32@1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,m25p32", "st,m25p";
+ spi-max-frequency = <20000000>;
+ reg = <1>;
+
+ partition@0 {
+ label = "U-Boot";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "Kernel";
+ reg = <0x40000 0x3c0000>;
+ };
+ };
+};
+
+&esdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc3_1>;
+ non-removable;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ hog {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ 982 0x80000000 /* MX53_PAD_PATA_DATA14__GPIO2_14 */
+ 989 0x80000000 /* MX53_PAD_PATA_DATA15__GPIO2_15 */
+ 424 0x80000000 /* MX53_PAD_EIM_EB2__GPIO2_30 */
+ 701 0x80000000 /* MX53_PAD_EIM_DA13__GPIO3_13 */
+ 449 0x80000000 /* MX53_PAD_EIM_D19__GPIO3_19 */
+ 43 0x80000000 /* MX53_PAD_KEY_ROW2__GPIO4_11 */
+ 868 0x80000000 /* MX53_PAD_PATA_DA_0__GPIO7_6 */
+ >;
+ };
+ };
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2_1>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2_1>;
+ status = "okay";
+
+ codec: sgtl5000@0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ };
+
+ magnetometer: mag3110@0e {
+ compatible = "fsl,mag3110";
+ reg = <0x0e>;
+ };
+
+ touchkey: mpr121@5a {
+ compatible = "fsl,mpr121";
+ reg = <0x5a>;
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1_1>;
+ status = "okay";
+
+ accelerometer: mma8450@1c {
+ compatible = "fsl,mma8450";
+ reg = <0x1c>;
+ };
+
+ camera: ov5642@3c {
+ compatible = "ovti,ov5642";
+ reg = <0x3c>;
+ };
+
+ pmic: dialog@48 {
+ compatible = "dialog,da9053", "dialog,da9052";
+ reg = <0x48>;
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec_1>;
+ phy-mode = "rmii";
+ phy-reset-gpios = <&gpio7 6 0>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx53-tqma53.dtsi b/arch/arm/boot/dts/imx53-tqma53.dtsi
new file mode 100644
index 00000000000..8278ec5ec22
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-tqma53.dtsi
@@ -0,0 +1,172 @@
+/*
+ * Copyright 2012 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ * Copyright 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "imx53.dtsi"
+
+/ {
+ model = "TQ TQMa53";
+ compatible = "tq,tqma53", "fsl,imx53";
+
+ memory {
+ reg = <0x70000000 0x40000000>; /* Up to 1GiB */
+ };
+
+ regulators {
+ compatible = "simple-bus";
+
+ reg_3p3v: 3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+};
+
+&esdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc2_1>;
+ wp-gpios = <&gpio1 2 0>;
+ cd-gpios = <&gpio1 4 0>;
+ status = "disabled";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3_2>;
+ status = "disabled";
+};
+
+&ecspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1_1>;
+ fsl,spi-num-chipselects = <4>;
+ cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>,
+ <&gpio3 24 0>, <&gpio3 25 0>;
+ status = "disabled";
+};
+
+&esdhc3 { /* EMMC */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc3_1>;
+ vmmc-supply = <&reg_3p3v>;
+ non-removable;
+ bus-width = <8>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ i2s {
+ pinctrl_i2s_1: i2s-grp1 {
+ fsl,pins = <
+ 1 0x10000 /* I2S_MCLK */
+ 10 0x10000 /* I2S_SCLK */
+ 17 0x10000 /* I2S_DOUT */
+ 23 0x10000 /* I2S_LRCLK*/
+ 30 0x10000 /* I2S_DIN */
+ >;
+ };
+ };
+
+ hog {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ 610 0x10000 /* MX53_PAD_EIM_CS1__IPU_DI1_PIN6 (VSYNC)*/
+ 711 0x10000 /* MX53_PAD_EIM_DA15__IPU_DI1_PIN4 (HSYNC)*/
+ 873 0x10000 /* MX53_PAD_PATA_DA_1__GPIO7_7 (LCD_BLT_EN)*/
+ 878 0x10000 /* MX53_PAD_PATA_DA_2__GPIO7_8 (LCD_RESET)*/
+ 922 0x10000 /* MX53_PAD_PATA_DATA5__GPIO2_5 (LCD_POWER)*/
+ 928 0x10000 /* MX53_PAD_PATA_DATA6__GPIO2_6 (PMIC_INT)*/
+ 982 0x10000 /* MX53_PAD_PATA_DATA14__GPIO2_14 (CSI_RST)*/
+ 989 0x10000 /* MX53_PAD_PATA_DATA15__GPIO2_15 (CSI_PWDN)*/
+ 1069 0x10000 /* MX53_PAD_GPIO_0__GPIO1_0 (SYSTEM_DOWN)*/
+ 1093 0x10000 /* MX53_PAD_GPIO_3__GPIO1_3 */
+ >;
+ };
+ };
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_2>;
+ fsl,uart-has-rtscts;
+ status = "disabled";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2_1>;
+ status = "disabled";
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can1_2>;
+ status = "disabled";
+};
+
+&can2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can2_1>;
+ status = "disabled";
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3_1>;
+ status = "disabled";
+};
+
+&cspi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_cspi_1>;
+ fsl,spi-num-chipselects = <3>;
+ cs-gpios = <&gpio1 18 0>, <&gpio1 19 0>,
+ <&gpio1 21 0>;
+ status = "disabled";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2_1>;
+ status = "okay";
+
+ pmic: mc34708@8 {
+ compatible = "fsl,mc34708";
+ reg = <0x8>;
+ fsl,mc13xxx-uses-rtc;
+ interrupt-parent = <&gpio2>;
+ interrupts = <6 8>; /* PDATA_DATA6, low active */
+ };
+
+ sensor1: lm75@48 {
+ compatible = "lm75";
+ reg = <0x48>;
+ };
+
+ eeprom: 24c64@50 {
+ compatible = "at,24c64";
+ pagesize = <32>;
+ reg = <0x50>;
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec_1>;
+ phy-mode = "rmii";
+ status = "disabled";
+};
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index edc3f1eb669..d05aa215c7f 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -274,6 +274,44 @@
};
};
+ csi {
+ pinctrl_csi_1: csigrp-1 {
+ fsl,pins = <
+ 286 0x1d5 /* MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN */
+ 291 0x1d5 /* MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC */
+ 280 0x1d5 /* MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC */
+ 276 0x1d5 /* MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK */
+ 409 0x1d5 /* MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19 */
+ 402 0x1d5 /* MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18 */
+ 395 0x1d5 /* MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17 */
+ 388 0x1d5 /* MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16 */
+ 381 0x1d5 /* MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15 */
+ 374 0x1d5 /* MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14 */
+ 367 0x1d5 /* MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13 */
+ 360 0x1d5 /* MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12 */
+ 352 0x1d5 /* MX53_PAD_CSI0_DAT11__IPU_CSI0_D_11 */
+ 344 0x1d5 /* MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10 */
+ 336 0x1d5 /* MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9 */
+ 328 0x1d5 /* MX53_PAD_CSI0_DAT8__IPU_CSI0_D_8 */
+ 320 0x1d5 /* MX53_PAD_CSI0_DAT7__IPU_CSI0_D_7 */
+ 312 0x1d5 /* MX53_PAD_CSI0_DAT6__IPU_CSI0_D_6 */
+ 304 0x1d5 /* MX53_PAD_CSI0_DAT5__IPU_CSI0_D_5 */
+ 296 0x1d5 /* MX53_PAD_CSI0_DAT4__IPU_CSI0_D_4 */
+ 276 0x1d5 /* MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK */
+ >;
+ };
+ };
+
+ cspi {
+ pinctrl_cspi_1: cspigrp-1 {
+ fsl,pins = <
+ 998 0x1d5 /* MX53_PAD_SD1_DATA0__CSPI_MISO */
+ 1008 0x1d5 /* MX53_PAD_SD1_CMD__CSPI_MOSI */
+ 1022 0x1d5 /* MX53_PAD_SD1_CLK__CSPI_SCLK */
+ >;
+ };
+ };
+
ecspi1 {
pinctrl_ecspi1_1: ecspi1grp-1 {
fsl,pins = <
@@ -349,6 +387,13 @@
853 0x80000000 /* MX53_PAD_PATA_DIOR__CAN1_RXCAN */
>;
};
+
+ pinctrl_can1_2: can1grp-2 {
+ fsl,pins = <
+ 37 0x80000000 /* MX53_PAD_KEY_COL2__CAN1_TXCAN */
+ 44 0x80000000 /* MX53_PAD_KEY_ROW2__CAN1_RXCAN */
+ >;
+ };
};
can2 {
@@ -387,6 +432,14 @@
};
};
+ owire {
+ pinctrl_owire_1: owiregrp-1 {
+ fsl,pins = <
+ 1166 0x80000000 /* MX53_PAD_GPIO_18__OWIRE_LINE */
+ >;
+ };
+ };
+
uart1 {
pinctrl_uart1_1: uart1grp-1 {
fsl,pins = <
@@ -421,6 +474,14 @@
880 0x1c5 /* MX53_PAD_PATA_DA_2__UART3_RTS */
>;
};
+
+ pinctrl_uart3_2: uart3grp-2 {
+ fsl,pins = <
+ 884 0x1c5 /* MX53_PAD_PATA_CS_0__UART3_TXD_MUX */
+ 888 0x1c5 /* MX53_PAD_PATA_CS_1__UART3_RXD_MUX */
+ >;
+ };
+
};
uart4 {
@@ -570,6 +631,13 @@
status = "disabled";
};
+ owire: owire@63fa4000 {
+ compatible = "fsl,imx53-owire", "fsl,imx21-owire";
+ reg = <0x63fa4000 0x4000>;
+ clocks = <&clks 159>;
+ status = "disabled";
+ };
+
ecspi2: ecspi@63fac000 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi
new file mode 100644
index 00000000000..63fafe2a606
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl.dtsi
@@ -0,0 +1,59 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/include/ "imx6qdl.dtsi"
+
+/ {
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,cortex-a9";
+ reg = <0>;
+ next-level-cache = <&L2>;
+ };
+
+ cpu@1 {
+ compatible = "arm,cortex-a9";
+ reg = <1>;
+ next-level-cache = <&L2>;
+ };
+ };
+
+ soc {
+ aips1: aips-bus@02000000 {
+ pxp: pxp@020f0000 {
+ reg = <0x020f0000 0x4000>;
+ interrupts = <0 98 0x04>;
+ };
+
+ epdc: epdc@020f4000 {
+ reg = <0x020f4000 0x4000>;
+ interrupts = <0 97 0x04>;
+ };
+
+ lcdif: lcdif@020f8000 {
+ reg = <0x020f8000 0x4000>;
+ interrupts = <0 39 0x04>;
+ };
+ };
+
+ aips2: aips-bus@02100000 {
+ i2c4: i2c@021f8000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx1-i2c";
+ reg = <0x021f8000 0x4000>;
+ interrupts = <0 35 0x04>;
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts
index 5bfa02a3f85..53eb241fa5a 100644
--- a/arch/arm/boot/dts/imx6q-arm2.dts
+++ b/arch/arm/boot/dts/imx6q-arm2.dts
@@ -21,71 +21,6 @@
reg = <0x10000000 0x80000000>;
};
- soc {
- gpmi-nand@00112000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_gpmi_nand_1>;
- status = "disabled"; /* gpmi nand conflicts with SD */
- };
-
- aips-bus@02000000 { /* AIPS1 */
- iomuxc@020e0000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_hog>;
-
- hog {
- pinctrl_hog: hoggrp {
- fsl,pins = <
- 176 0x80000000 /* MX6Q_PAD_EIM_D25__GPIO_3_25 */
- >;
- };
- };
-
- arm2 {
- pinctrl_usdhc3_arm2: usdhc3grp-arm2 {
- fsl,pins = <
- 1363 0x80000000 /* MX6Q_PAD_NANDF_CS0__GPIO_6_11 */
- 1369 0x80000000 /* MX6Q_PAD_NANDF_CS1__GPIO_6_14 */
- >;
- };
- };
- };
- };
-
- aips-bus@02100000 { /* AIPS2 */
- ethernet@02188000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_enet_2>;
- phy-mode = "rgmii";
- status = "okay";
- };
-
- usdhc@02198000 { /* uSDHC3 */
- cd-gpios = <&gpio6 11 0>;
- wp-gpios = <&gpio6 14 0>;
- vmmc-supply = <&reg_3p3v>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc3_1
- &pinctrl_usdhc3_arm2>;
- status = "okay";
- };
-
- usdhc@0219c000 { /* uSDHC4 */
- non-removable;
- vmmc-supply = <&reg_3p3v>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc4_1>;
- status = "okay";
- };
-
- uart4: serial@021f0000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart4_1>;
- status = "okay";
- };
- };
- };
-
regulators {
compatible = "simple-bus";
@@ -108,3 +43,62 @@
};
};
};
+
+&gpmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpmi_nand_1>;
+ status = "disabled"; /* gpmi nand conflicts with SD */
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ hog {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ 176 0x80000000 /* MX6Q_PAD_EIM_D25__GPIO_3_25 */
+ >;
+ };
+ };
+
+ arm2 {
+ pinctrl_usdhc3_arm2: usdhc3grp-arm2 {
+ fsl,pins = <
+ 1363 0x80000000 /* MX6Q_PAD_NANDF_CS0__GPIO_6_11 */
+ 1369 0x80000000 /* MX6Q_PAD_NANDF_CS1__GPIO_6_14 */
+ >;
+ };
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet_2>;
+ phy-mode = "rgmii";
+ status = "okay";
+};
+
+&usdhc3 {
+ cd-gpios = <&gpio6 11 0>;
+ wp-gpios = <&gpio6 14 0>;
+ vmmc-supply = <&reg_3p3v>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3_1
+ &pinctrl_usdhc3_arm2>;
+ status = "okay";
+};
+
+&usdhc4 {
+ non-removable;
+ vmmc-supply = <&reg_3p3v>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc4_1>;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4_1>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-sabreauto.dts b/arch/arm/boot/dts/imx6q-sabreauto.dts
index 826e4ad1477..656d489122f 100644
--- a/arch/arm/boot/dts/imx6q-sabreauto.dts
+++ b/arch/arm/boot/dts/imx6q-sabreauto.dts
@@ -20,45 +20,39 @@
memory {
reg = <0x10000000 0x80000000>;
};
+};
- soc {
- aips-bus@02000000 { /* AIPS1 */
- iomuxc@020e0000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_hog>;
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
- hog {
- pinctrl_hog: hoggrp {
- fsl,pins = <
- 1376 0x80000000 /* MX6Q_PAD_NANDF_CS2__GPIO_6_15 */
- 13 0x80000000 /* MX6Q_PAD_SD2_DAT2__GPIO_1_13 */
- >;
- };
- };
- };
+ hog {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ 1376 0x80000000 /* MX6Q_PAD_NANDF_CS2__GPIO_6_15 */
+ 13 0x80000000 /* MX6Q_PAD_SD2_DAT2__GPIO_1_13 */
+ >;
};
+ };
+};
- aips-bus@02100000 { /* AIPS2 */
- uart4: serial@021f0000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart4_1>;
- status = "okay";
- };
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4_1>;
+ status = "okay";
+};
- ethernet@02188000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_enet_2>;
- phy-mode = "rgmii";
- status = "okay";
- };
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet_2>;
+ phy-mode = "rgmii";
+ status = "okay";
+};
- usdhc@02198000 { /* uSDHC3 */
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc3_1>;
- cd-gpios = <&gpio6 15 0>;
- wp-gpios = <&gpio1 13 0>;
- status = "okay";
- };
- };
- };
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3_1>;
+ cd-gpios = <&gpio6 15 0>;
+ wp-gpios = <&gpio1 13 0>;
+ status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
index d152328285a..2ce355cd05e 100644
--- a/arch/arm/boot/dts/imx6q-sabrelite.dts
+++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
@@ -21,118 +21,6 @@
reg = <0x10000000 0x40000000>;
};
- soc {
- aips-bus@02000000 { /* AIPS1 */
- spba-bus@02000000 {
- ecspi@02008000 { /* eCSPI1 */
- fsl,spi-num-chipselects = <1>;
- cs-gpios = <&gpio3 19 0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ecspi1_1>;
- status = "okay";
-
- flash: m25p80@0 {
- compatible = "sst,sst25vf016b";
- spi-max-frequency = <20000000>;
- reg = <0>;
- };
- };
-
- ssi1: ssi@02028000 {
- fsl,mode = "i2s-slave";
- status = "okay";
- };
- };
-
- iomuxc@020e0000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_hog>;
-
- hog {
- pinctrl_hog: hoggrp {
- fsl,pins = <
- 1450 0x80000000 /* MX6Q_PAD_NANDF_D6__GPIO_2_6 */
- 1458 0x80000000 /* MX6Q_PAD_NANDF_D7__GPIO_2_7 */
- 121 0x80000000 /* MX6Q_PAD_EIM_D19__GPIO_3_19 */
- 144 0x80000000 /* MX6Q_PAD_EIM_D22__GPIO_3_22 */
- 152 0x80000000 /* MX6Q_PAD_EIM_D23__GPIO_3_23 */
- 1262 0x80000000 /* MX6Q_PAD_SD3_DAT5__GPIO_7_0 */
- 1270 0x1f0b0 /* MX6Q_PAD_SD3_DAT4__GPIO_7_1 */
- 953 0x80000000 /* MX6Q_PAD_GPIO_0__CCM_CLKO */
- >;
- };
- };
- };
- };
-
- aips-bus@02100000 { /* AIPS2 */
- usb@02184000 { /* USB OTG */
- vbus-supply = <&reg_usb_otg_vbus>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usbotg_1>;
- disable-over-current;
- status = "okay";
- };
-
- usb@02184200 { /* USB1 */
- status = "okay";
- };
-
- ethernet@02188000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_enet_1>;
- phy-mode = "rgmii";
- phy-reset-gpios = <&gpio3 23 0>;
- status = "okay";
- };
-
- usdhc@02198000 { /* uSDHC3 */
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc3_2>;
- cd-gpios = <&gpio7 0 0>;
- wp-gpios = <&gpio7 1 0>;
- vmmc-supply = <&reg_3p3v>;
- status = "okay";
- };
-
- usdhc@0219c000 { /* uSDHC4 */
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc4_2>;
- cd-gpios = <&gpio2 6 0>;
- wp-gpios = <&gpio2 7 0>;
- vmmc-supply = <&reg_3p3v>;
- status = "okay";
- };
-
- audmux@021d8000 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_audmux_1>;
- };
-
- uart2: serial@021e8000 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2_1>;
- };
-
- i2c@021a0000 { /* I2C1 */
- status = "okay";
- clock-frequency = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c1_1>;
-
- codec: sgtl5000@0a {
- compatible = "fsl,sgtl5000";
- reg = <0x0a>;
- clocks = <&clks 169>;
- VDDA-supply = <&reg_2p5v>;
- VDDIO-supply = <&reg_3p3v>;
- };
- };
- };
- };
-
regulators {
compatible = "simple-bus";
@@ -176,3 +64,107 @@
mux-ext-port = <4>;
};
};
+
+&ecspi1 {
+ fsl,spi-num-chipselects = <1>;
+ cs-gpios = <&gpio3 19 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1_1>;
+ status = "okay";
+
+ flash: m25p80@0 {
+ compatible = "sst,sst25vf016b";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ };
+};
+
+&ssi1 {
+ fsl,mode = "i2s-slave";
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ hog {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ 1450 0x80000000 /* MX6Q_PAD_NANDF_D6__GPIO_2_6 */
+ 1458 0x80000000 /* MX6Q_PAD_NANDF_D7__GPIO_2_7 */
+ 121 0x80000000 /* MX6Q_PAD_EIM_D19__GPIO_3_19 */
+ 144 0x80000000 /* MX6Q_PAD_EIM_D22__GPIO_3_22 */
+ 152 0x80000000 /* MX6Q_PAD_EIM_D23__GPIO_3_23 */
+ 1262 0x80000000 /* MX6Q_PAD_SD3_DAT5__GPIO_7_0 */
+ 1270 0x1f0b0 /* MX6Q_PAD_SD3_DAT4__GPIO_7_1 */
+ 953 0x80000000 /* MX6Q_PAD_GPIO_0__CCM_CLKO */
+ >;
+ };
+ };
+};
+
+&usbotg {
+ vbus-supply = <&reg_usb_otg_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg_1>;
+ disable-over-current;
+ status = "okay";
+};
+
+&usbh1 {
+ status = "okay";
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet_1>;
+ phy-mode = "rgmii";
+ phy-reset-gpios = <&gpio3 23 0>;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3_2>;
+ cd-gpios = <&gpio7 0 0>;
+ wp-gpios = <&gpio7 1 0>;
+ vmmc-supply = <&reg_3p3v>;
+ status = "okay";
+};
+
+&usdhc4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc4_2>;
+ cd-gpios = <&gpio2 6 0>;
+ wp-gpios = <&gpio2 7 0>;
+ vmmc-supply = <&reg_3p3v>;
+ status = "okay";
+};
+
+&audmux {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux_1>;
+};
+
+&uart2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2_1>;
+};
+
+&i2c1 {
+ status = "okay";
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1_1>;
+
+ codec: sgtl5000@0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ clocks = <&clks 169>;
+ VDDA-supply = <&reg_2p5v>;
+ VDDIO-supply = <&reg_3p3v>;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6q-sabresd.dts b/arch/arm/boot/dts/imx6q-sabresd.dts
index a42402562b7..2dea304a798 100644
--- a/arch/arm/boot/dts/imx6q-sabresd.dts
+++ b/arch/arm/boot/dts/imx6q-sabresd.dts
@@ -21,61 +21,6 @@
reg = <0x10000000 0x40000000>;
};
- soc {
- aips-bus@02000000 { /* AIPS1 */
- spba-bus@02000000 {
- uart1: serial@02020000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1_1>;
- status = "okay";
- };
- };
-
- iomuxc@020e0000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_hog>;
-
- hog {
- pinctrl_hog: hoggrp {
- fsl,pins = <
- 1004 0x80000000 /* MX6Q_PAD_GPIO_4__GPIO_1_4 */
- 1012 0x80000000 /* MX6Q_PAD_GPIO_5__GPIO_1_5 */
- 1402 0x80000000 /* MX6Q_PAD_NANDF_D0__GPIO_2_0 */
- 1410 0x80000000 /* MX6Q_PAD_NANDF_D1__GPIO_2_1 */
- 1418 0x80000000 /* MX6Q_PAD_NANDF_D2__GPIO_2_2 */
- 1426 0x80000000 /* MX6Q_PAD_NANDF_D3__GPIO_2_3 */
- >;
- };
- };
- };
- };
-
- aips-bus@02100000 { /* AIPS2 */
- ethernet@02188000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_enet_1>;
- phy-mode = "rgmii";
- status = "okay";
- };
-
- usdhc@02194000 { /* uSDHC2 */
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc2_1>;
- cd-gpios = <&gpio2 2 0>;
- wp-gpios = <&gpio2 3 0>;
- status = "okay";
- };
-
- usdhc@02198000 { /* uSDHC3 */
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc3_1>;
- cd-gpios = <&gpio2 0 0>;
- wp-gpios = <&gpio2 1 0>;
- status = "okay";
- };
- };
- };
-
gpio-keys {
compatible = "gpio-keys";
@@ -92,3 +37,50 @@
};
};
};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_1>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ hog {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ 1004 0x80000000 /* MX6Q_PAD_GPIO_4__GPIO_1_4 */
+ 1012 0x80000000 /* MX6Q_PAD_GPIO_5__GPIO_1_5 */
+ 1402 0x80000000 /* MX6Q_PAD_NANDF_D0__GPIO_2_0 */
+ 1410 0x80000000 /* MX6Q_PAD_NANDF_D1__GPIO_2_1 */
+ 1418 0x80000000 /* MX6Q_PAD_NANDF_D2__GPIO_2_2 */
+ 1426 0x80000000 /* MX6Q_PAD_NANDF_D3__GPIO_2_3 */
+ >;
+ };
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet_1>;
+ phy-mode = "rgmii";
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2_1>;
+ cd-gpios = <&gpio2 2 0>;
+ wp-gpios = <&gpio2 3 0>;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3_1>;
+ cd-gpios = <&gpio2 0 0>;
+ wp-gpios = <&gpio2 1 0>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index ff1205ea571..cba021eb035 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -1,33 +1,16 @@
+
/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
+ * Copyright 2013 Freescale Semiconductor, Inc.
*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
*
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
*/
-/include/ "skeleton.dtsi"
+/include/ "imx6qdl.dtsi"
/ {
- aliases {
- serial0 = &uart1;
- serial1 = &uart2;
- serial2 = &uart3;
- serial3 = &uart4;
- serial4 = &uart5;
- gpio0 = &gpio1;
- gpio1 = &gpio2;
- gpio2 = &gpio3;
- gpio3 = &gpio4;
- gpio4 = &gpio5;
- gpio5 = &gpio6;
- gpio6 = &gpio7;
- };
-
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -38,12 +21,19 @@
next-level-cache = <&L2>;
operating-points = <
/* kHz uV */
- 792000 1100000
+ 1200000 1275000
+ 996000 1250000
+ 792000 1150000
396000 950000
- 198000 850000
>;
clock-latency = <61036>; /* two CLK32 periods */
- cpu0-supply = <&reg_cpu>;
+ clocks = <&clks 104>, <&clks 6>, <&clks 16>,
+ <&clks 17>, <&clks 170>;
+ clock-names = "arm", "pll2_pfd2_396m", "step",
+ "pll1_sw", "pll1_sys";
+ arm-supply = <&reg_arm>;
+ pu-supply = <&reg_pu>;
+ soc-supply = <&reg_soc>;
};
cpu@1 {
@@ -65,142 +55,9 @@
};
};
- intc: interrupt-controller@00a01000 {
- compatible = "arm,cortex-a9-gic";
- #interrupt-cells = <3>;
- #address-cells = <1>;
- #size-cells = <1>;
- interrupt-controller;
- reg = <0x00a01000 0x1000>,
- <0x00a00100 0x100>;
- };
-
- clocks {
- #address-cells = <1>;
- #size-cells = <0>;
-
- ckil {
- compatible = "fsl,imx-ckil", "fixed-clock";
- clock-frequency = <32768>;
- };
-
- ckih1 {
- compatible = "fsl,imx-ckih1", "fixed-clock";
- clock-frequency = <0>;
- };
-
- osc {
- compatible = "fsl,imx-osc", "fixed-clock";
- clock-frequency = <24000000>;
- };
- };
-
soc {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- interrupt-parent = <&intc>;
- ranges;
-
- dma-apbh@00110000 {
- compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
- reg = <0x00110000 0x2000>;
- clocks = <&clks 106>;
- };
-
- nfc: gpmi-nand@00112000 {
- compatible = "fsl,imx6q-gpmi-nand";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x00112000 0x2000>, <0x00114000 0x2000>;
- reg-names = "gpmi-nand", "bch";
- interrupts = <0 13 0x04>, <0 15 0x04>;
- interrupt-names = "gpmi-dma", "bch";
- clocks = <&clks 152>, <&clks 153>, <&clks 151>,
- <&clks 150>, <&clks 149>;
- clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
- "gpmi_bch_apb", "per1_bch";
- fsl,gpmi-dma-channel = <0>;
- status = "disabled";
- };
-
- timer@00a00600 {
- compatible = "arm,cortex-a9-twd-timer";
- reg = <0x00a00600 0x20>;
- interrupts = <1 13 0xf01>;
- };
-
- L2: l2-cache@00a02000 {
- compatible = "arm,pl310-cache";
- reg = <0x00a02000 0x1000>;
- interrupts = <0 92 0x04>;
- cache-unified;
- cache-level = <2>;
- };
-
aips-bus@02000000 { /* AIPS1 */
- compatible = "fsl,aips-bus", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x02000000 0x100000>;
- ranges;
-
spba-bus@02000000 {
- compatible = "fsl,spba-bus", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x02000000 0x40000>;
- ranges;
-
- spdif: spdif@02004000 {
- reg = <0x02004000 0x4000>;
- interrupts = <0 52 0x04>;
- };
-
- ecspi1: ecspi@02008000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
- reg = <0x02008000 0x4000>;
- interrupts = <0 31 0x04>;
- clocks = <&clks 112>, <&clks 112>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- ecspi2: ecspi@0200c000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
- reg = <0x0200c000 0x4000>;
- interrupts = <0 32 0x04>;
- clocks = <&clks 113>, <&clks 113>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- ecspi3: ecspi@02010000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
- reg = <0x02010000 0x4000>;
- interrupts = <0 33 0x04>;
- clocks = <&clks 114>, <&clks 114>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- ecspi4: ecspi@02014000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
- reg = <0x02014000 0x4000>;
- interrupts = <0 34 0x04>;
- clocks = <&clks 115>, <&clks 115>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
ecspi5: ecspi@02018000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -211,361 +68,6 @@
clock-names = "ipg", "per";
status = "disabled";
};
-
- uart1: serial@02020000 {
- compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
- reg = <0x02020000 0x4000>;
- interrupts = <0 26 0x04>;
- clocks = <&clks 160>, <&clks 161>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- esai: esai@02024000 {
- reg = <0x02024000 0x4000>;
- interrupts = <0 51 0x04>;
- };
-
- ssi1: ssi@02028000 {
- compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
- reg = <0x02028000 0x4000>;
- interrupts = <0 46 0x04>;
- clocks = <&clks 178>;
- fsl,fifo-depth = <15>;
- fsl,ssi-dma-events = <38 37>;
- status = "disabled";
- };
-
- ssi2: ssi@0202c000 {
- compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
- reg = <0x0202c000 0x4000>;
- interrupts = <0 47 0x04>;
- clocks = <&clks 179>;
- fsl,fifo-depth = <15>;
- fsl,ssi-dma-events = <42 41>;
- status = "disabled";
- };
-
- ssi3: ssi@02030000 {
- compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
- reg = <0x02030000 0x4000>;
- interrupts = <0 48 0x04>;
- clocks = <&clks 180>;
- fsl,fifo-depth = <15>;
- fsl,ssi-dma-events = <46 45>;
- status = "disabled";
- };
-
- asrc: asrc@02034000 {
- reg = <0x02034000 0x4000>;
- interrupts = <0 50 0x04>;
- };
-
- spba@0203c000 {
- reg = <0x0203c000 0x4000>;
- };
- };
-
- vpu: vpu@02040000 {
- reg = <0x02040000 0x3c000>;
- interrupts = <0 3 0x04 0 12 0x04>;
- };
-
- aipstz@0207c000 { /* AIPSTZ1 */
- reg = <0x0207c000 0x4000>;
- };
-
- pwm1: pwm@02080000 {
- #pwm-cells = <2>;
- compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
- reg = <0x02080000 0x4000>;
- interrupts = <0 83 0x04>;
- clocks = <&clks 62>, <&clks 145>;
- clock-names = "ipg", "per";
- };
-
- pwm2: pwm@02084000 {
- #pwm-cells = <2>;
- compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
- reg = <0x02084000 0x4000>;
- interrupts = <0 84 0x04>;
- clocks = <&clks 62>, <&clks 146>;
- clock-names = "ipg", "per";
- };
-
- pwm3: pwm@02088000 {
- #pwm-cells = <2>;
- compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
- reg = <0x02088000 0x4000>;
- interrupts = <0 85 0x04>;
- clocks = <&clks 62>, <&clks 147>;
- clock-names = "ipg", "per";
- };
-
- pwm4: pwm@0208c000 {
- #pwm-cells = <2>;
- compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
- reg = <0x0208c000 0x4000>;
- interrupts = <0 86 0x04>;
- clocks = <&clks 62>, <&clks 148>;
- clock-names = "ipg", "per";
- };
-
- can1: flexcan@02090000 {
- reg = <0x02090000 0x4000>;
- interrupts = <0 110 0x04>;
- };
-
- can2: flexcan@02094000 {
- reg = <0x02094000 0x4000>;
- interrupts = <0 111 0x04>;
- };
-
- gpt: gpt@02098000 {
- compatible = "fsl,imx6q-gpt";
- reg = <0x02098000 0x4000>;
- interrupts = <0 55 0x04>;
- };
-
- gpio1: gpio@0209c000 {
- compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
- reg = <0x0209c000 0x4000>;
- interrupts = <0 66 0x04 0 67 0x04>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio2: gpio@020a0000 {
- compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
- reg = <0x020a0000 0x4000>;
- interrupts = <0 68 0x04 0 69 0x04>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio3: gpio@020a4000 {
- compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
- reg = <0x020a4000 0x4000>;
- interrupts = <0 70 0x04 0 71 0x04>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio4: gpio@020a8000 {
- compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
- reg = <0x020a8000 0x4000>;
- interrupts = <0 72 0x04 0 73 0x04>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio5: gpio@020ac000 {
- compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
- reg = <0x020ac000 0x4000>;
- interrupts = <0 74 0x04 0 75 0x04>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio6: gpio@020b0000 {
- compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
- reg = <0x020b0000 0x4000>;
- interrupts = <0 76 0x04 0 77 0x04>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio7: gpio@020b4000 {
- compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
- reg = <0x020b4000 0x4000>;
- interrupts = <0 78 0x04 0 79 0x04>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- kpp: kpp@020b8000 {
- reg = <0x020b8000 0x4000>;
- interrupts = <0 82 0x04>;
- };
-
- wdog1: wdog@020bc000 {
- compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
- reg = <0x020bc000 0x4000>;
- interrupts = <0 80 0x04>;
- clocks = <&clks 0>;
- };
-
- wdog2: wdog@020c0000 {
- compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
- reg = <0x020c0000 0x4000>;
- interrupts = <0 81 0x04>;
- clocks = <&clks 0>;
- status = "disabled";
- };
-
- clks: ccm@020c4000 {
- compatible = "fsl,imx6q-ccm";
- reg = <0x020c4000 0x4000>;
- interrupts = <0 87 0x04 0 88 0x04>;
- #clock-cells = <1>;
- };
-
- anatop: anatop@020c8000 {
- compatible = "fsl,imx6q-anatop", "syscon", "simple-bus";
- reg = <0x020c8000 0x1000>;
- interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>;
-
- regulator-1p1@110 {
- compatible = "fsl,anatop-regulator";
- regulator-name = "vdd1p1";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1375000>;
- regulator-always-on;
- anatop-reg-offset = <0x110>;
- anatop-vol-bit-shift = <8>;
- anatop-vol-bit-width = <5>;
- anatop-min-bit-val = <4>;
- anatop-min-voltage = <800000>;
- anatop-max-voltage = <1375000>;
- };
-
- regulator-3p0@120 {
- compatible = "fsl,anatop-regulator";
- regulator-name = "vdd3p0";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <3150000>;
- regulator-always-on;
- anatop-reg-offset = <0x120>;
- anatop-vol-bit-shift = <8>;
- anatop-vol-bit-width = <5>;
- anatop-min-bit-val = <0>;
- anatop-min-voltage = <2625000>;
- anatop-max-voltage = <3400000>;
- };
-
- regulator-2p5@130 {
- compatible = "fsl,anatop-regulator";
- regulator-name = "vdd2p5";
- regulator-min-microvolt = <2000000>;
- regulator-max-microvolt = <2750000>;
- regulator-always-on;
- anatop-reg-offset = <0x130>;
- anatop-vol-bit-shift = <8>;
- anatop-vol-bit-width = <5>;
- anatop-min-bit-val = <0>;
- anatop-min-voltage = <2000000>;
- anatop-max-voltage = <2750000>;
- };
-
- reg_cpu: regulator-vddcore@140 {
- compatible = "fsl,anatop-regulator";
- regulator-name = "cpu";
- regulator-min-microvolt = <725000>;
- regulator-max-microvolt = <1450000>;
- regulator-always-on;
- anatop-reg-offset = <0x140>;
- anatop-vol-bit-shift = <0>;
- anatop-vol-bit-width = <5>;
- anatop-min-bit-val = <1>;
- anatop-min-voltage = <725000>;
- anatop-max-voltage = <1450000>;
- };
-
- regulator-vddpu@140 {
- compatible = "fsl,anatop-regulator";
- regulator-name = "vddpu";
- regulator-min-microvolt = <725000>;
- regulator-max-microvolt = <1450000>;
- regulator-always-on;
- anatop-reg-offset = <0x140>;
- anatop-vol-bit-shift = <9>;
- anatop-vol-bit-width = <5>;
- anatop-min-bit-val = <1>;
- anatop-min-voltage = <725000>;
- anatop-max-voltage = <1450000>;
- };
-
- regulator-vddsoc@140 {
- compatible = "fsl,anatop-regulator";
- regulator-name = "vddsoc";
- regulator-min-microvolt = <725000>;
- regulator-max-microvolt = <1450000>;
- regulator-always-on;
- anatop-reg-offset = <0x140>;
- anatop-vol-bit-shift = <18>;
- anatop-vol-bit-width = <5>;
- anatop-min-bit-val = <1>;
- anatop-min-voltage = <725000>;
- anatop-max-voltage = <1450000>;
- };
- };
-
- usbphy1: usbphy@020c9000 {
- compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
- reg = <0x020c9000 0x1000>;
- interrupts = <0 44 0x04>;
- clocks = <&clks 182>;
- };
-
- usbphy2: usbphy@020ca000 {
- compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
- reg = <0x020ca000 0x1000>;
- interrupts = <0 45 0x04>;
- clocks = <&clks 183>;
- };
-
- snvs@020cc000 {
- compatible = "fsl,sec-v4.0-mon", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x020cc000 0x4000>;
-
- snvs-rtc-lp@34 {
- compatible = "fsl,sec-v4.0-mon-rtc-lp";
- reg = <0x34 0x58>;
- interrupts = <0 19 0x04 0 20 0x04>;
- };
- };
-
- epit1: epit@020d0000 { /* EPIT1 */
- reg = <0x020d0000 0x4000>;
- interrupts = <0 56 0x04>;
- };
-
- epit2: epit@020d4000 { /* EPIT2 */
- reg = <0x020d4000 0x4000>;
- interrupts = <0 57 0x04>;
- };
-
- src: src@020d8000 {
- compatible = "fsl,imx6q-src";
- reg = <0x020d8000 0x4000>;
- interrupts = <0 91 0x04 0 96 0x04>;
- };
-
- gpc: gpc@020dc000 {
- compatible = "fsl,imx6q-gpc";
- reg = <0x020dc000 0x4000>;
- interrupts = <0 89 0x04 0 90 0x04>;
- };
-
- gpr: iomuxc-gpr@020e0000 {
- compatible = "fsl,imx6q-iomuxc-gpr", "syscon";
- reg = <0x020e0000 0x38>;
};
iomuxc: iomuxc@020e0000 {
@@ -780,272 +282,6 @@
};
};
};
-
- dcic1: dcic@020e4000 {
- reg = <0x020e4000 0x4000>;
- interrupts = <0 124 0x04>;
- };
-
- dcic2: dcic@020e8000 {
- reg = <0x020e8000 0x4000>;
- interrupts = <0 125 0x04>;
- };
-
- sdma: sdma@020ec000 {
- compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma";
- reg = <0x020ec000 0x4000>;
- interrupts = <0 2 0x04>;
- clocks = <&clks 155>, <&clks 155>;
- clock-names = "ipg", "ahb";
- fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q-to1.bin";
- };
- };
-
- aips-bus@02100000 { /* AIPS2 */
- compatible = "fsl,aips-bus", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x02100000 0x100000>;
- ranges;
-
- caam@02100000 {
- reg = <0x02100000 0x40000>;
- interrupts = <0 105 0x04 0 106 0x04>;
- };
-
- aipstz@0217c000 { /* AIPSTZ2 */
- reg = <0x0217c000 0x4000>;
- };
-
- usbotg: usb@02184000 {
- compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
- reg = <0x02184000 0x200>;
- interrupts = <0 43 0x04>;
- clocks = <&clks 162>;
- fsl,usbphy = <&usbphy1>;
- fsl,usbmisc = <&usbmisc 0>;
- status = "disabled";
- };
-
- usbh1: usb@02184200 {
- compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
- reg = <0x02184200 0x200>;
- interrupts = <0 40 0x04>;
- clocks = <&clks 162>;
- fsl,usbphy = <&usbphy2>;
- fsl,usbmisc = <&usbmisc 1>;
- status = "disabled";
- };
-
- usbh2: usb@02184400 {
- compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
- reg = <0x02184400 0x200>;
- interrupts = <0 41 0x04>;
- clocks = <&clks 162>;
- fsl,usbmisc = <&usbmisc 2>;
- status = "disabled";
- };
-
- usbh3: usb@02184600 {
- compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
- reg = <0x02184600 0x200>;
- interrupts = <0 42 0x04>;
- clocks = <&clks 162>;
- fsl,usbmisc = <&usbmisc 3>;
- status = "disabled";
- };
-
- usbmisc: usbmisc: usbmisc@02184800 {
- #index-cells = <1>;
- compatible = "fsl,imx6q-usbmisc";
- reg = <0x02184800 0x200>;
- clocks = <&clks 162>;
- };
-
- fec: ethernet@02188000 {
- compatible = "fsl,imx6q-fec";
- reg = <0x02188000 0x4000>;
- interrupts = <0 118 0x04 0 119 0x04>;
- clocks = <&clks 117>, <&clks 117>, <&clks 190>;
- clock-names = "ipg", "ahb", "ptp";
- status = "disabled";
- };
-
- mlb@0218c000 {
- reg = <0x0218c000 0x4000>;
- interrupts = <0 53 0x04 0 117 0x04 0 126 0x04>;
- };
-
- usdhc1: usdhc@02190000 {
- compatible = "fsl,imx6q-usdhc";
- reg = <0x02190000 0x4000>;
- interrupts = <0 22 0x04>;
- clocks = <&clks 163>, <&clks 163>, <&clks 163>;
- clock-names = "ipg", "ahb", "per";
- bus-width = <4>;
- status = "disabled";
- };
-
- usdhc2: usdhc@02194000 {
- compatible = "fsl,imx6q-usdhc";
- reg = <0x02194000 0x4000>;
- interrupts = <0 23 0x04>;
- clocks = <&clks 164>, <&clks 164>, <&clks 164>;
- clock-names = "ipg", "ahb", "per";
- bus-width = <4>;
- status = "disabled";
- };
-
- usdhc3: usdhc@02198000 {
- compatible = "fsl,imx6q-usdhc";
- reg = <0x02198000 0x4000>;
- interrupts = <0 24 0x04>;
- clocks = <&clks 165>, <&clks 165>, <&clks 165>;
- clock-names = "ipg", "ahb", "per";
- bus-width = <4>;
- status = "disabled";
- };
-
- usdhc4: usdhc@0219c000 {
- compatible = "fsl,imx6q-usdhc";
- reg = <0x0219c000 0x4000>;
- interrupts = <0 25 0x04>;
- clocks = <&clks 166>, <&clks 166>, <&clks 166>;
- clock-names = "ipg", "ahb", "per";
- bus-width = <4>;
- status = "disabled";
- };
-
- i2c1: i2c@021a0000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
- reg = <0x021a0000 0x4000>;
- interrupts = <0 36 0x04>;
- clocks = <&clks 125>;
- status = "disabled";
- };
-
- i2c2: i2c@021a4000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
- reg = <0x021a4000 0x4000>;
- interrupts = <0 37 0x04>;
- clocks = <&clks 126>;
- status = "disabled";
- };
-
- i2c3: i2c@021a8000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
- reg = <0x021a8000 0x4000>;
- interrupts = <0 38 0x04>;
- clocks = <&clks 127>;
- status = "disabled";
- };
-
- romcp@021ac000 {
- reg = <0x021ac000 0x4000>;
- };
-
- mmdc0: mmdc@021b0000 { /* MMDC0 */
- compatible = "fsl,imx6q-mmdc";
- reg = <0x021b0000 0x4000>;
- };
-
- mmdc1: mmdc@021b4000 { /* MMDC1 */
- reg = <0x021b4000 0x4000>;
- };
-
- weim@021b8000 {
- reg = <0x021b8000 0x4000>;
- interrupts = <0 14 0x04>;
- };
-
- ocotp@021bc000 {
- reg = <0x021bc000 0x4000>;
- };
-
- ocotp@021c0000 {
- reg = <0x021c0000 0x4000>;
- interrupts = <0 21 0x04>;
- };
-
- tzasc@021d0000 { /* TZASC1 */
- reg = <0x021d0000 0x4000>;
- interrupts = <0 108 0x04>;
- };
-
- tzasc@021d4000 { /* TZASC2 */
- reg = <0x021d4000 0x4000>;
- interrupts = <0 109 0x04>;
- };
-
- audmux: audmux@021d8000 {
- compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux";
- reg = <0x021d8000 0x4000>;
- status = "disabled";
- };
-
- mipi@021dc000 { /* MIPI-CSI */
- reg = <0x021dc000 0x4000>;
- };
-
- mipi@021e0000 { /* MIPI-DSI */
- reg = <0x021e0000 0x4000>;
- };
-
- vdoa@021e4000 {
- reg = <0x021e4000 0x4000>;
- interrupts = <0 18 0x04>;
- };
-
- uart2: serial@021e8000 {
- compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
- reg = <0x021e8000 0x4000>;
- interrupts = <0 27 0x04>;
- clocks = <&clks 160>, <&clks 161>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- uart3: serial@021ec000 {
- compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
- reg = <0x021ec000 0x4000>;
- interrupts = <0 28 0x04>;
- clocks = <&clks 160>, <&clks 161>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- uart4: serial@021f0000 {
- compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
- reg = <0x021f0000 0x4000>;
- interrupts = <0 29 0x04>;
- clocks = <&clks 160>, <&clks 161>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- uart5: serial@021f4000 {
- compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
- reg = <0x021f4000 0x4000>;
- interrupts = <0 30 0x04>;
- clocks = <&clks 160>, <&clks 161>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
- };
-
- ipu1: ipu@02400000 {
- #crtc-cells = <1>;
- compatible = "fsl,imx6q-ipu";
- reg = <0x02400000 0x400000>;
- interrupts = <0 6 0x4 0 5 0x4>;
- clocks = <&clks 130>, <&clks 131>, <&clks 132>;
- clock-names = "bus", "di0", "di1";
};
ipu2: ipu@02800000 {
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
new file mode 100644
index 00000000000..06ec460b458
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -0,0 +1,800 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ aliases {
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ serial3 = &uart4;
+ serial4 = &uart5;
+ gpio0 = &gpio1;
+ gpio1 = &gpio2;
+ gpio2 = &gpio3;
+ gpio3 = &gpio4;
+ gpio4 = &gpio5;
+ gpio5 = &gpio6;
+ gpio6 = &gpio7;
+ };
+
+ intc: interrupt-controller@00a01000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-controller;
+ reg = <0x00a01000 0x1000>,
+ <0x00a00100 0x100>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ckil {
+ compatible = "fsl,imx-ckil", "fixed-clock";
+ clock-frequency = <32768>;
+ };
+
+ ckih1 {
+ compatible = "fsl,imx-ckih1", "fixed-clock";
+ clock-frequency = <0>;
+ };
+
+ osc {
+ compatible = "fsl,imx-osc", "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&intc>;
+ ranges;
+
+ dma-apbh@00110000 {
+ compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
+ reg = <0x00110000 0x2000>;
+ clocks = <&clks 106>;
+ };
+
+ gpmi: gpmi-nand@00112000 {
+ compatible = "fsl,imx6q-gpmi-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x00112000 0x2000>, <0x00114000 0x2000>;
+ reg-names = "gpmi-nand", "bch";
+ interrupts = <0 13 0x04>, <0 15 0x04>;
+ interrupt-names = "gpmi-dma", "bch";
+ clocks = <&clks 152>, <&clks 153>, <&clks 151>,
+ <&clks 150>, <&clks 149>;
+ clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
+ "gpmi_bch_apb", "per1_bch";
+ fsl,gpmi-dma-channel = <0>;
+ status = "disabled";
+ };
+
+ timer@00a00600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0x00a00600 0x20>;
+ interrupts = <1 13 0xf01>;
+ };
+
+ L2: l2-cache@00a02000 {
+ compatible = "arm,pl310-cache";
+ reg = <0x00a02000 0x1000>;
+ interrupts = <0 92 0x04>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ aips-bus@02000000 { /* AIPS1 */
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x02000000 0x100000>;
+ ranges;
+
+ spba-bus@02000000 {
+ compatible = "fsl,spba-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x02000000 0x40000>;
+ ranges;
+
+ spdif: spdif@02004000 {
+ reg = <0x02004000 0x4000>;
+ interrupts = <0 52 0x04>;
+ };
+
+ ecspi1: ecspi@02008000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+ reg = <0x02008000 0x4000>;
+ interrupts = <0 31 0x04>;
+ clocks = <&clks 112>, <&clks 112>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ ecspi2: ecspi@0200c000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+ reg = <0x0200c000 0x4000>;
+ interrupts = <0 32 0x04>;
+ clocks = <&clks 113>, <&clks 113>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ ecspi3: ecspi@02010000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+ reg = <0x02010000 0x4000>;
+ interrupts = <0 33 0x04>;
+ clocks = <&clks 114>, <&clks 114>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ ecspi4: ecspi@02014000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+ reg = <0x02014000 0x4000>;
+ interrupts = <0 34 0x04>;
+ clocks = <&clks 115>, <&clks 115>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ uart1: serial@02020000 {
+ compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+ reg = <0x02020000 0x4000>;
+ interrupts = <0 26 0x04>;
+ clocks = <&clks 160>, <&clks 161>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ esai: esai@02024000 {
+ reg = <0x02024000 0x4000>;
+ interrupts = <0 51 0x04>;
+ };
+
+ ssi1: ssi@02028000 {
+ compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
+ reg = <0x02028000 0x4000>;
+ interrupts = <0 46 0x04>;
+ clocks = <&clks 178>;
+ fsl,fifo-depth = <15>;
+ fsl,ssi-dma-events = <38 37>;
+ status = "disabled";
+ };
+
+ ssi2: ssi@0202c000 {
+ compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
+ reg = <0x0202c000 0x4000>;
+ interrupts = <0 47 0x04>;
+ clocks = <&clks 179>;
+ fsl,fifo-depth = <15>;
+ fsl,ssi-dma-events = <42 41>;
+ status = "disabled";
+ };
+
+ ssi3: ssi@02030000 {
+ compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
+ reg = <0x02030000 0x4000>;
+ interrupts = <0 48 0x04>;
+ clocks = <&clks 180>;
+ fsl,fifo-depth = <15>;
+ fsl,ssi-dma-events = <46 45>;
+ status = "disabled";
+ };
+
+ asrc: asrc@02034000 {
+ reg = <0x02034000 0x4000>;
+ interrupts = <0 50 0x04>;
+ };
+
+ spba@0203c000 {
+ reg = <0x0203c000 0x4000>;
+ };
+ };
+
+ vpu: vpu@02040000 {
+ reg = <0x02040000 0x3c000>;
+ interrupts = <0 3 0x04 0 12 0x04>;
+ };
+
+ aipstz@0207c000 { /* AIPSTZ1 */
+ reg = <0x0207c000 0x4000>;
+ };
+
+ pwm1: pwm@02080000 {
+ #pwm-cells = <2>;
+ compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
+ reg = <0x02080000 0x4000>;
+ interrupts = <0 83 0x04>;
+ clocks = <&clks 62>, <&clks 145>;
+ clock-names = "ipg", "per";
+ };
+
+ pwm2: pwm@02084000 {
+ #pwm-cells = <2>;
+ compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
+ reg = <0x02084000 0x4000>;
+ interrupts = <0 84 0x04>;
+ clocks = <&clks 62>, <&clks 146>;
+ clock-names = "ipg", "per";
+ };
+
+ pwm3: pwm@02088000 {
+ #pwm-cells = <2>;
+ compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
+ reg = <0x02088000 0x4000>;
+ interrupts = <0 85 0x04>;
+ clocks = <&clks 62>, <&clks 147>;
+ clock-names = "ipg", "per";
+ };
+
+ pwm4: pwm@0208c000 {
+ #pwm-cells = <2>;
+ compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
+ reg = <0x0208c000 0x4000>;
+ interrupts = <0 86 0x04>;
+ clocks = <&clks 62>, <&clks 148>;
+ clock-names = "ipg", "per";
+ };
+
+ can1: flexcan@02090000 {
+ reg = <0x02090000 0x4000>;
+ interrupts = <0 110 0x04>;
+ };
+
+ can2: flexcan@02094000 {
+ reg = <0x02094000 0x4000>;
+ interrupts = <0 111 0x04>;
+ };
+
+ gpt: gpt@02098000 {
+ compatible = "fsl,imx6q-gpt";
+ reg = <0x02098000 0x4000>;
+ interrupts = <0 55 0x04>;
+ };
+
+ gpio1: gpio@0209c000 {
+ compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
+ reg = <0x0209c000 0x4000>;
+ interrupts = <0 66 0x04 0 67 0x04>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio@020a0000 {
+ compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
+ reg = <0x020a0000 0x4000>;
+ interrupts = <0 68 0x04 0 69 0x04>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio3: gpio@020a4000 {
+ compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
+ reg = <0x020a4000 0x4000>;
+ interrupts = <0 70 0x04 0 71 0x04>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio4: gpio@020a8000 {
+ compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
+ reg = <0x020a8000 0x4000>;
+ interrupts = <0 72 0x04 0 73 0x04>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio5: gpio@020ac000 {
+ compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
+ reg = <0x020ac000 0x4000>;
+ interrupts = <0 74 0x04 0 75 0x04>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio6: gpio@020b0000 {
+ compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
+ reg = <0x020b0000 0x4000>;
+ interrupts = <0 76 0x04 0 77 0x04>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio7: gpio@020b4000 {
+ compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
+ reg = <0x020b4000 0x4000>;
+ interrupts = <0 78 0x04 0 79 0x04>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ kpp: kpp@020b8000 {
+ reg = <0x020b8000 0x4000>;
+ interrupts = <0 82 0x04>;
+ };
+
+ wdog1: wdog@020bc000 {
+ compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
+ reg = <0x020bc000 0x4000>;
+ interrupts = <0 80 0x04>;
+ clocks = <&clks 0>;
+ };
+
+ wdog2: wdog@020c0000 {
+ compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
+ reg = <0x020c0000 0x4000>;
+ interrupts = <0 81 0x04>;
+ clocks = <&clks 0>;
+ status = "disabled";
+ };
+
+ clks: ccm@020c4000 {
+ compatible = "fsl,imx6q-ccm";
+ reg = <0x020c4000 0x4000>;
+ interrupts = <0 87 0x04 0 88 0x04>;
+ #clock-cells = <1>;
+ };
+
+ anatop: anatop@020c8000 {
+ compatible = "fsl,imx6q-anatop", "syscon", "simple-bus";
+ reg = <0x020c8000 0x1000>;
+ interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>;
+
+ regulator-1p1@110 {
+ compatible = "fsl,anatop-regulator";
+ regulator-name = "vdd1p1";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1375000>;
+ regulator-always-on;
+ anatop-reg-offset = <0x110>;
+ anatop-vol-bit-shift = <8>;
+ anatop-vol-bit-width = <5>;
+ anatop-min-bit-val = <4>;
+ anatop-min-voltage = <800000>;
+ anatop-max-voltage = <1375000>;
+ };
+
+ regulator-3p0@120 {
+ compatible = "fsl,anatop-regulator";
+ regulator-name = "vdd3p0";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3150000>;
+ regulator-always-on;
+ anatop-reg-offset = <0x120>;
+ anatop-vol-bit-shift = <8>;
+ anatop-vol-bit-width = <5>;
+ anatop-min-bit-val = <0>;
+ anatop-min-voltage = <2625000>;
+ anatop-max-voltage = <3400000>;
+ };
+
+ regulator-2p5@130 {
+ compatible = "fsl,anatop-regulator";
+ regulator-name = "vdd2p5";
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2750000>;
+ regulator-always-on;
+ anatop-reg-offset = <0x130>;
+ anatop-vol-bit-shift = <8>;
+ anatop-vol-bit-width = <5>;
+ anatop-min-bit-val = <0>;
+ anatop-min-voltage = <2000000>;
+ anatop-max-voltage = <2750000>;
+ };
+
+ reg_arm: regulator-vddcore@140 {
+ compatible = "fsl,anatop-regulator";
+ regulator-name = "cpu";
+ regulator-min-microvolt = <725000>;
+ regulator-max-microvolt = <1450000>;
+ regulator-always-on;
+ anatop-reg-offset = <0x140>;
+ anatop-vol-bit-shift = <0>;
+ anatop-vol-bit-width = <5>;
+ anatop-delay-reg-offset = <0x170>;
+ anatop-delay-bit-shift = <24>;
+ anatop-delay-bit-width = <2>;
+ anatop-min-bit-val = <1>;
+ anatop-min-voltage = <725000>;
+ anatop-max-voltage = <1450000>;
+ };
+
+ reg_pu: regulator-vddpu@140 {
+ compatible = "fsl,anatop-regulator";
+ regulator-name = "vddpu";
+ regulator-min-microvolt = <725000>;
+ regulator-max-microvolt = <1450000>;
+ regulator-always-on;
+ anatop-reg-offset = <0x140>;
+ anatop-vol-bit-shift = <9>;
+ anatop-vol-bit-width = <5>;
+ anatop-delay-reg-offset = <0x170>;
+ anatop-delay-bit-shift = <26>;
+ anatop-delay-bit-width = <2>;
+ anatop-min-bit-val = <1>;
+ anatop-min-voltage = <725000>;
+ anatop-max-voltage = <1450000>;
+ };
+
+ reg_soc: regulator-vddsoc@140 {
+ compatible = "fsl,anatop-regulator";
+ regulator-name = "vddsoc";
+ regulator-min-microvolt = <725000>;
+ regulator-max-microvolt = <1450000>;
+ regulator-always-on;
+ anatop-reg-offset = <0x140>;
+ anatop-vol-bit-shift = <18>;
+ anatop-vol-bit-width = <5>;
+ anatop-delay-reg-offset = <0x170>;
+ anatop-delay-bit-shift = <28>;
+ anatop-delay-bit-width = <2>;
+ anatop-min-bit-val = <1>;
+ anatop-min-voltage = <725000>;
+ anatop-max-voltage = <1450000>;
+ };
+ };
+
+ usbphy1: usbphy@020c9000 {
+ compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
+ reg = <0x020c9000 0x1000>;
+ interrupts = <0 44 0x04>;
+ clocks = <&clks 182>;
+ };
+
+ usbphy2: usbphy@020ca000 {
+ compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
+ reg = <0x020ca000 0x1000>;
+ interrupts = <0 45 0x04>;
+ clocks = <&clks 183>;
+ };
+
+ snvs@020cc000 {
+ compatible = "fsl,sec-v4.0-mon", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x020cc000 0x4000>;
+
+ snvs-rtc-lp@34 {
+ compatible = "fsl,sec-v4.0-mon-rtc-lp";
+ reg = <0x34 0x58>;
+ interrupts = <0 19 0x04 0 20 0x04>;
+ };
+ };
+
+ epit1: epit@020d0000 { /* EPIT1 */
+ reg = <0x020d0000 0x4000>;
+ interrupts = <0 56 0x04>;
+ };
+
+ epit2: epit@020d4000 { /* EPIT2 */
+ reg = <0x020d4000 0x4000>;
+ interrupts = <0 57 0x04>;
+ };
+
+ src: src@020d8000 {
+ compatible = "fsl,imx6q-src";
+ reg = <0x020d8000 0x4000>;
+ interrupts = <0 91 0x04 0 96 0x04>;
+ };
+
+ gpc: gpc@020dc000 {
+ compatible = "fsl,imx6q-gpc";
+ reg = <0x020dc000 0x4000>;
+ interrupts = <0 89 0x04 0 90 0x04>;
+ };
+
+ gpr: iomuxc-gpr@020e0000 {
+ compatible = "fsl,imx6q-iomuxc-gpr", "syscon";
+ reg = <0x020e0000 0x38>;
+ };
+
+ dcic1: dcic@020e4000 {
+ reg = <0x020e4000 0x4000>;
+ interrupts = <0 124 0x04>;
+ };
+
+ dcic2: dcic@020e8000 {
+ reg = <0x020e8000 0x4000>;
+ interrupts = <0 125 0x04>;
+ };
+
+ sdma: sdma@020ec000 {
+ compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma";
+ reg = <0x020ec000 0x4000>;
+ interrupts = <0 2 0x04>;
+ clocks = <&clks 155>, <&clks 155>;
+ clock-names = "ipg", "ahb";
+ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
+ };
+ };
+
+ aips-bus@02100000 { /* AIPS2 */
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x02100000 0x100000>;
+ ranges;
+
+ caam@02100000 {
+ reg = <0x02100000 0x40000>;
+ interrupts = <0 105 0x04 0 106 0x04>;
+ };
+
+ aipstz@0217c000 { /* AIPSTZ2 */
+ reg = <0x0217c000 0x4000>;
+ };
+
+ usbotg: usb@02184000 {
+ compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
+ reg = <0x02184000 0x200>;
+ interrupts = <0 43 0x04>;
+ clocks = <&clks 162>;
+ fsl,usbphy = <&usbphy1>;
+ fsl,usbmisc = <&usbmisc 0>;
+ status = "disabled";
+ };
+
+ usbh1: usb@02184200 {
+ compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
+ reg = <0x02184200 0x200>;
+ interrupts = <0 40 0x04>;
+ clocks = <&clks 162>;
+ fsl,usbphy = <&usbphy2>;
+ fsl,usbmisc = <&usbmisc 1>;
+ status = "disabled";
+ };
+
+ usbh2: usb@02184400 {
+ compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
+ reg = <0x02184400 0x200>;
+ interrupts = <0 41 0x04>;
+ clocks = <&clks 162>;
+ fsl,usbmisc = <&usbmisc 2>;
+ status = "disabled";
+ };
+
+ usbh3: usb@02184600 {
+ compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
+ reg = <0x02184600 0x200>;
+ interrupts = <0 42 0x04>;
+ clocks = <&clks 162>;
+ fsl,usbmisc = <&usbmisc 3>;
+ status = "disabled";
+ };
+
+ usbmisc: usbmisc: usbmisc@02184800 {
+ #index-cells = <1>;
+ compatible = "fsl,imx6q-usbmisc";
+ reg = <0x02184800 0x200>;
+ clocks = <&clks 162>;
+ };
+
+ fec: ethernet@02188000 {
+ compatible = "fsl,imx6q-fec";
+ reg = <0x02188000 0x4000>;
+ interrupts = <0 118 0x04 0 119 0x04>;
+ clocks = <&clks 117>, <&clks 117>, <&clks 190>;
+ clock-names = "ipg", "ahb", "ptp";
+ status = "disabled";
+ };
+
+ mlb@0218c000 {
+ reg = <0x0218c000 0x4000>;
+ interrupts = <0 53 0x04 0 117 0x04 0 126 0x04>;
+ };
+
+ usdhc1: usdhc@02190000 {
+ compatible = "fsl,imx6q-usdhc";
+ reg = <0x02190000 0x4000>;
+ interrupts = <0 22 0x04>;
+ clocks = <&clks 163>, <&clks 163>, <&clks 163>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ usdhc2: usdhc@02194000 {
+ compatible = "fsl,imx6q-usdhc";
+ reg = <0x02194000 0x4000>;
+ interrupts = <0 23 0x04>;
+ clocks = <&clks 164>, <&clks 164>, <&clks 164>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ usdhc3: usdhc@02198000 {
+ compatible = "fsl,imx6q-usdhc";
+ reg = <0x02198000 0x4000>;
+ interrupts = <0 24 0x04>;
+ clocks = <&clks 165>, <&clks 165>, <&clks 165>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ usdhc4: usdhc@0219c000 {
+ compatible = "fsl,imx6q-usdhc";
+ reg = <0x0219c000 0x4000>;
+ interrupts = <0 25 0x04>;
+ clocks = <&clks 166>, <&clks 166>, <&clks 166>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@021a0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
+ reg = <0x021a0000 0x4000>;
+ interrupts = <0 36 0x04>;
+ clocks = <&clks 125>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@021a4000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
+ reg = <0x021a4000 0x4000>;
+ interrupts = <0 37 0x04>;
+ clocks = <&clks 126>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@021a8000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
+ reg = <0x021a8000 0x4000>;
+ interrupts = <0 38 0x04>;
+ clocks = <&clks 127>;
+ status = "disabled";
+ };
+
+ romcp@021ac000 {
+ reg = <0x021ac000 0x4000>;
+ };
+
+ mmdc0: mmdc@021b0000 { /* MMDC0 */
+ compatible = "fsl,imx6q-mmdc";
+ reg = <0x021b0000 0x4000>;
+ };
+
+ mmdc1: mmdc@021b4000 { /* MMDC1 */
+ reg = <0x021b4000 0x4000>;
+ };
+
+ weim@021b8000 {
+ reg = <0x021b8000 0x4000>;
+ interrupts = <0 14 0x04>;
+ };
+
+ ocotp@021bc000 {
+ compatible = "fsl,imx6q-ocotp";
+ reg = <0x021bc000 0x4000>;
+ };
+
+ ocotp@021c0000 {
+ reg = <0x021c0000 0x4000>;
+ interrupts = <0 21 0x04>;
+ };
+
+ tzasc@021d0000 { /* TZASC1 */
+ reg = <0x021d0000 0x4000>;
+ interrupts = <0 108 0x04>;
+ };
+
+ tzasc@021d4000 { /* TZASC2 */
+ reg = <0x021d4000 0x4000>;
+ interrupts = <0 109 0x04>;
+ };
+
+ audmux: audmux@021d8000 {
+ compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux";
+ reg = <0x021d8000 0x4000>;
+ status = "disabled";
+ };
+
+ mipi@021dc000 { /* MIPI-CSI */
+ reg = <0x021dc000 0x4000>;
+ };
+
+ mipi@021e0000 { /* MIPI-DSI */
+ reg = <0x021e0000 0x4000>;
+ };
+
+ vdoa@021e4000 {
+ reg = <0x021e4000 0x4000>;
+ interrupts = <0 18 0x04>;
+ };
+
+ uart2: serial@021e8000 {
+ compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+ reg = <0x021e8000 0x4000>;
+ interrupts = <0 27 0x04>;
+ clocks = <&clks 160>, <&clks 161>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ uart3: serial@021ec000 {
+ compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+ reg = <0x021ec000 0x4000>;
+ interrupts = <0 28 0x04>;
+ clocks = <&clks 160>, <&clks 161>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ uart4: serial@021f0000 {
+ compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+ reg = <0x021f0000 0x4000>;
+ interrupts = <0 29 0x04>;
+ clocks = <&clks 160>, <&clks 161>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ uart5: serial@021f4000 {
+ compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+ reg = <0x021f4000 0x4000>;
+ interrupts = <0 30 0x04>;
+ clocks = <&clks 160>, <&clks 161>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+ };
+
+ ipu1: ipu@02400000 {
+ #crtc-cells = <1>;
+ compatible = "fsl,imx6q-ipu";
+ reg = <0x02400000 0x400000>;
+ interrupts = <0 6 0x4 0 5 0x4>;
+ clocks = <&clks 130>, <&clks 131>, <&clks 132>;
+ clock-names = "bus", "di0", "di1";
+ };
+ };
+};
diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c
index fb7cb841b64..0f39f8c93b9 100644
--- a/arch/arm/mach-imx/clk-imx51-imx53.c
+++ b/arch/arm/mach-imx/clk-imx51-imx53.c
@@ -83,6 +83,7 @@ enum imx5_clks {
ssi2_root_gate, ssi3_root_gate, ssi_ext1_gate, ssi_ext2_gate,
epit1_ipg_gate, epit1_hf_gate, epit2_ipg_gate, epit2_hf_gate,
can_sel, can1_serial_gate, can1_ipg_gate,
+ owire_gate,
clk_max
};
@@ -233,12 +234,13 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
clk[epit1_hf_gate] = imx_clk_gate2("epit1_hf_gate", "per_root", MXC_CCM_CCGR2, 4);
clk[epit2_ipg_gate] = imx_clk_gate2("epit2_ipg_gate", "ipg", MXC_CCM_CCGR2, 6);
clk[epit2_hf_gate] = imx_clk_gate2("epit2_hf_gate", "per_root", MXC_CCM_CCGR2, 8);
+ clk[owire_gate] = imx_clk_gate2("owire_gate", "per_root", MXC_CCM_CCGR2, 22);
for (i = 0; i < ARRAY_SIZE(clk); i++)
if (IS_ERR(clk[i]))
pr_err("i.MX5 clk %d: register failed with %ld\n",
i, PTR_ERR(clk[i]));
-
+
clk_register_clkdev(clk[gpt_hf_gate], "per", "imx-gpt.0");
clk_register_clkdev(clk[gpt_ipg_gate], "ipg", "imx-gpt.0");
clk_register_clkdev(clk[uart1_per_gate], "per", "imx21-uart.0");
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index 540138c4606..7b025ee528a 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -164,8 +164,8 @@ enum mx6q_clks {
usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg,
pll4_audio, pll5_video, pll8_mlb, pll7_usb_host, pll6_enet, ssi1_ipg,
ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5,
- sata_ref, sata_ref_100m, pcie_ref, pcie_ref_125m, enet_ref,
- clk_max
+ sata_ref, sata_ref_100m, pcie_ref, pcie_ref_125m, enet_ref, usbphy1_gate,
+ usbphy2_gate, clk_max
};
static struct clk *clk[clk_max];
@@ -218,8 +218,21 @@ int __init mx6q_clocks_init(void)
clk[pll7_usb_host] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7_usb_host","osc", base + 0x20, 0x3);
clk[pll8_mlb] = imx_clk_pllv3(IMX_PLLV3_MLB, "pll8_mlb", "osc", base + 0xd0, 0x0);
- clk[usbphy1] = imx_clk_gate("usbphy1", "pll3_usb_otg", base + 0x10, 6);
- clk[usbphy2] = imx_clk_gate("usbphy2", "pll7_usb_host", base + 0x20, 6);
+ /*
+ * Bit 20 is the reserved and read-only bit, we do this only for:
+ * - Do nothing for usbphy clk_enable/disable
+ * - Keep refcount when do usbphy clk_enable/disable, in that case,
+ * the clk framework may need to enable/disable usbphy's parent
+ */
+ clk[usbphy1] = imx_clk_gate("usbphy1", "pll3_usb_otg", base + 0x10, 20);
+ clk[usbphy2] = imx_clk_gate("usbphy2", "pll7_usb_host", base + 0x20, 20);
+
+ /*
+ * usbphy*_gate needs to be on after system boots up, and software
+ * never needs to control it anymore.
+ */
+ clk[usbphy1_gate] = imx_clk_gate("usbphy1_gate", "dummy", base + 0x10, 6);
+ clk[usbphy2_gate] = imx_clk_gate("usbphy2_gate", "dummy", base + 0x20, 6);
clk[sata_ref] = imx_clk_fixed_factor("sata_ref", "pll6_enet", 1, 5);
clk[pcie_ref] = imx_clk_fixed_factor("pcie_ref", "pll6_enet", 1, 4);
@@ -446,6 +459,11 @@ int __init mx6q_clocks_init(void)
for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
clk_prepare_enable(clk[clks_init_on[i]]);
+ if (IS_ENABLED(CONFIG_USB_MXS_PHY)) {
+ clk_prepare_enable(clk[usbphy1_gate]);
+ clk_prepare_enable(clk[usbphy2_gate]);
+ }
+
/* Set initial power mode */
imx6q_set_lpm(WAIT_CLOCKED);
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 1786b2d1257..9ffd103b27e 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -12,6 +12,7 @@
#include <linux/clk.h>
#include <linux/clkdev.h>
+#include <linux/cpu.h>
#include <linux/delay.h>
#include <linux/export.h>
#include <linux/init.h>
@@ -22,6 +23,7 @@
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
+#include <linux/opp.h>
#include <linux/phy.h>
#include <linux/regmap.h>
#include <linux/micrel_phy.h>
@@ -200,6 +202,64 @@ static void __init imx6q_init_machine(void)
imx6q_1588_init();
}
+#define OCOTP_CFG3 0x440
+#define OCOTP_CFG3_SPEED_SHIFT 16
+#define OCOTP_CFG3_SPEED_1P2GHZ 0x3
+
+static void __init imx6q_opp_check_1p2ghz(struct device *cpu_dev)
+{
+ struct device_node *np;
+ void __iomem *base;
+ u32 val;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-ocotp");
+ if (!np) {
+ pr_warn("failed to find ocotp node\n");
+ return;
+ }
+
+ base = of_iomap(np, 0);
+ if (!base) {
+ pr_warn("failed to map ocotp\n");
+ goto put_node;
+ }
+
+ val = readl_relaxed(base + OCOTP_CFG3);
+ val >>= OCOTP_CFG3_SPEED_SHIFT;
+ if ((val & 0x3) != OCOTP_CFG3_SPEED_1P2GHZ)
+ if (opp_disable(cpu_dev, 1200000000))
+ pr_warn("failed to disable 1.2 GHz OPP\n");
+
+put_node:
+ of_node_put(np);
+}
+
+static void __init imx6q_opp_init(struct device *cpu_dev)
+{
+ struct device_node *np;
+
+ np = of_find_node_by_path("/cpus/cpu@0");
+ if (!np) {
+ pr_warn("failed to find cpu0 node\n");
+ return;
+ }
+
+ cpu_dev->of_node = np;
+ if (of_init_opp_table(cpu_dev)) {
+ pr_warn("failed to init OPP table\n");
+ goto put_node;
+ }
+
+ imx6q_opp_check_1p2ghz(cpu_dev);
+
+put_node:
+ of_node_put(np);
+}
+
+struct platform_device imx6q_cpufreq_pdev = {
+ .name = "imx6q-cpufreq",
+};
+
static void __init imx6q_init_late(void)
{
/*
@@ -208,6 +268,11 @@ static void __init imx6q_init_late(void)
*/
if (imx6q_revision() > IMX_CHIP_REVISION_1_1)
imx6q_cpuidle_init();
+
+ if (IS_ENABLED(CONFIG_ARM_IMX6Q_CPUFREQ)) {
+ imx6q_opp_init(&imx6q_cpufreq_pdev.dev);
+ platform_device_register(&imx6q_cpufreq_pdev);
+ }
}
static void __init imx6q_map_io(void)