diff options
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/arm/mach-at91/gpio.c | 2 | ||||
| -rw-r--r-- | arch/arm/mach-s3c2410/clock.c | 2 | ||||
| -rw-r--r-- | arch/arm/mach-s3c2412/clock.c | 2 | ||||
| -rw-r--r-- | arch/arm/mach-s3c2443/clock.c | 2 | ||||
| -rw-r--r-- | arch/cris/arch-v10/drivers/pcf8563.c | 2 | ||||
| -rw-r--r-- | arch/cris/arch-v32/drivers/pcf8563.c | 2 | ||||
| -rw-r--r-- | arch/h8300/kernel/irq.c | 2 | ||||
| -rw-r--r-- | arch/m68knommu/platform/5307/pit.c | 2 | ||||
| -rw-r--r-- | arch/mips/kernel/module.c | 2 | ||||
| -rw-r--r-- | arch/mips/pci/pci-excite.c | 2 | ||||
| -rw-r--r-- | arch/mips/sni/pcimt.c | 2 | ||||
| -rw-r--r-- | arch/powerpc/platforms/celleb/scc_uhc.c | 2 | ||||
| -rw-r--r-- | arch/sh64/kernel/pci_sh5.c | 2 | ||||
| -rw-r--r-- | arch/x86/kernel/suspend_64.c | 2 |
14 files changed, 14 insertions, 14 deletions
diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c index ba4a1bb3ee4..aa2d365c93f 100644 --- a/arch/arm/mach-at91/gpio.c +++ b/arch/arm/mach-at91/gpio.c @@ -439,7 +439,7 @@ void __init at91_gpio_irq_setup(void) for (i = 0; i < 32; i++, pin++) { /* * Can use the "simple" and not "edge" handler since it's - * shorter, and the AIC handles interupts sanely. + * shorter, and the AIC handles interrupts sanely. */ set_irq_chip(pin, &gpio_irqchip); set_irq_handler(pin, handle_simple_irq); diff --git a/arch/arm/mach-s3c2410/clock.c b/arch/arm/mach-s3c2410/clock.c index cab9d6265e9..2bfaa610202 100644 --- a/arch/arm/mach-s3c2410/clock.c +++ b/arch/arm/mach-s3c2410/clock.c @@ -238,7 +238,7 @@ int __init s3c2410_baseclk_add(void) } /* We must be careful disabling the clocks we are not intending to - * be using at boot time, as subsytems such as the LCD which do + * be using at boot time, as subsystems such as the LCD which do * their own DMA requests to the bus can cause the system to lockup * if they where in the middle of requesting bus access. * diff --git a/arch/arm/mach-s3c2412/clock.c b/arch/arm/mach-s3c2412/clock.c index 8543dd6df39..45899360189 100644 --- a/arch/arm/mach-s3c2412/clock.c +++ b/arch/arm/mach-s3c2412/clock.c @@ -689,7 +689,7 @@ int __init s3c2412_baseclk_add(void) } /* We must be careful disabling the clocks we are not intending to - * be using at boot time, as subsytems such as the LCD which do + * be using at boot time, as subsystems such as the LCD which do * their own DMA requests to the bus can cause the system to lockup * if they where in the middle of requesting bus access. * diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c index 58402948c47..b42f956738d 100644 --- a/arch/arm/mach-s3c2443/clock.c +++ b/arch/arm/mach-s3c2443/clock.c @@ -1005,7 +1005,7 @@ void __init s3c2443_init_clocks(int xtal) } /* We must be careful disabling the clocks we are not intending to - * be using at boot time, as subsytems such as the LCD which do + * be using at boot time, as subsystems such as the LCD which do * their own DMA requests to the bus can cause the system to lockup * if they where in the middle of requesting bus access. * diff --git a/arch/cris/arch-v10/drivers/pcf8563.c b/arch/cris/arch-v10/drivers/pcf8563.c index 1de0026bb94..c263b8232db 100644 --- a/arch/cris/arch-v10/drivers/pcf8563.c +++ b/arch/cris/arch-v10/drivers/pcf8563.c @@ -4,7 +4,7 @@ * From Phillips' datasheet: * * The PCF8563 is a CMOS real-time clock/calendar optimized for low power - * consumption. A programmable clock output, interupt output and voltage + * consumption. A programmable clock output, interrupt output and voltage * low detector are also provided. All address and data are transferred * serially via two-line bidirectional I2C-bus. Maximum bus speed is * 400 kbits/s. The built-in word address register is incremented diff --git a/arch/cris/arch-v32/drivers/pcf8563.c b/arch/cris/arch-v32/drivers/pcf8563.c index da479a14f83..6dbd700d3d6 100644 --- a/arch/cris/arch-v32/drivers/pcf8563.c +++ b/arch/cris/arch-v32/drivers/pcf8563.c @@ -4,7 +4,7 @@ * From Phillips' datasheet: * * The PCF8563 is a CMOS real-time clock/calendar optimized for low power - * consumption. A programmable clock output, interupt output and voltage + * consumption. A programmable clock output, interrupt output and voltage * low detector are also provided. All address and data are transferred * serially via two-line bidirectional I2C-bus. Maximum bus speed is * 400 kbits/s. The built-in word address register is incremented diff --git a/arch/h8300/kernel/irq.c b/arch/h8300/kernel/irq.c index 43d21e93f41..8dec4dd57b4 100644 --- a/arch/h8300/kernel/irq.c +++ b/arch/h8300/kernel/irq.c @@ -68,7 +68,7 @@ static void h8300_shutdown_irq(unsigned int irq) } /* - * h8300 interrupt controler implementation + * h8300 interrupt controller implementation */ struct irq_chip h8300irq_chip = { .name = "H8300-INTC", diff --git a/arch/m68knommu/platform/5307/pit.c b/arch/m68knommu/platform/5307/pit.c index e53c446d10e..f18352fa35a 100644 --- a/arch/m68knommu/platform/5307/pit.c +++ b/arch/m68knommu/platform/5307/pit.c @@ -83,7 +83,7 @@ unsigned long coldfire_pit_offset(void) /* * If we are still in the first half of the upcount and a - * timer interupt is pending, then add on a ticks worth of time. + * timer interrupt is pending, then add on a ticks worth of time. */ offset = ((pmr - pcntr) * (1000000 / HZ)) / pmr; if ((offset < (1000000 / HZ / 2)) && (*ipr & MCFPIT_IMR_IBIT)) diff --git a/arch/mips/kernel/module.c b/arch/mips/kernel/module.c index cb0801437b6..e7ed0ac4853 100644 --- a/arch/mips/kernel/module.c +++ b/arch/mips/kernel/module.c @@ -381,7 +381,7 @@ const struct exception_table_entry *search_module_dbetables(unsigned long addr) return e; } -/* Put in dbe list if neccessary. */ +/* Put in dbe list if necessary. */ int module_finalize(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs, struct module *me) diff --git a/arch/mips/pci/pci-excite.c b/arch/mips/pci/pci-excite.c index 3c86c77cb74..8a56876afcc 100644 --- a/arch/mips/pci/pci-excite.c +++ b/arch/mips/pci/pci-excite.c @@ -131,7 +131,7 @@ static int __init basler_excite_pci_setup(void) ocd_writel(0x00000000, bar + 0x100); } - /* Finally, enable the PCI interupt */ + /* Finally, enable the PCI interrupt */ #if USB_IRQ > 7 set_c0_intcontrol(1 << USB_IRQ); #else diff --git a/arch/mips/sni/pcimt.c b/arch/mips/sni/pcimt.c index 39bb15f1f2a..4df070f2ff5 100644 --- a/arch/mips/sni/pcimt.c +++ b/arch/mips/sni/pcimt.c @@ -246,7 +246,7 @@ static void pcimt_hwint1(void) /* * Note: ASIC PCI's builtin interrupt achknowledge feature is * broken. Using it may result in loss of some or all i8259 - * interupts, so don't use PCIMT_INT_ACKNOWLEDGE ... + * interrupts, so don't use PCIMT_INT_ACKNOWLEDGE ... */ irq = i8259_irq(); if (unlikely(irq < 0)) diff --git a/arch/powerpc/platforms/celleb/scc_uhc.c b/arch/powerpc/platforms/celleb/scc_uhc.c index a7c548bde2e..b59c38a06e3 100644 --- a/arch/powerpc/platforms/celleb/scc_uhc.c +++ b/arch/powerpc/platforms/celleb/scc_uhc.c @@ -36,7 +36,7 @@ static inline int uhc_clkctrl_ready(u32 val) } /* - * UHC(usb host controler) enable function. + * UHC(usb host controller) enable function. * affect to both of OHCI and EHCI core module. */ static void enable_scc_uhc(struct pci_dev *dev) diff --git a/arch/sh64/kernel/pci_sh5.c b/arch/sh64/kernel/pci_sh5.c index 388bb711f1b..b4d9534d2b0 100644 --- a/arch/sh64/kernel/pci_sh5.c +++ b/arch/sh64/kernel/pci_sh5.c @@ -480,7 +480,7 @@ static int __init pcibios_init(void) return -EINVAL; } - /* The pci subsytem needs to know where memory is and how much + /* The pci subsystem needs to know where memory is and how much * of it there is. I've simply made these globals. A better mechanism * is probably needed. */ diff --git a/arch/x86/kernel/suspend_64.c b/arch/x86/kernel/suspend_64.c index f8fafe527ff..76274eeae9a 100644 --- a/arch/x86/kernel/suspend_64.c +++ b/arch/x86/kernel/suspend_64.c @@ -123,7 +123,7 @@ void fix_processor_context(void) int cpu = smp_processor_id(); struct tss_struct *t = &per_cpu(init_tss, cpu); - set_tss_desc(cpu,t); /* This just modifies memory; should not be neccessary. But... This is neccessary, because 386 hardware has concept of busy TSS or some similar stupidity. */ + set_tss_desc(cpu,t); /* This just modifies memory; should not be necessary. But... This is necessary, because 386 hardware has concept of busy TSS or some similar stupidity. */ cpu_gdt(cpu)[GDT_ENTRY_TSS].type = 9; |