diff options
Diffstat (limited to 'arch')
42 files changed, 368 insertions, 570 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 93d595a7477..efe06e00471 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -2009,6 +2009,7 @@ menu "Power management options" source "kernel/power/Kconfig" config ARCH_SUSPEND_POSSIBLE + depends on !ARCH_S5P64X0 && !ARCH_S5P6442 def_bool y endmenu diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig index a021b5240bb..e849f67be47 100644 --- a/arch/arm/mach-exynos4/Kconfig +++ b/arch/arm/mach-exynos4/Kconfig @@ -20,6 +20,11 @@ config EXYNOS4_MCT help Use MCT (Multi Core Timer) as kernel timers +config EXYNOS4_DEV_AHCI + bool + help + Compile in platform device definitions for AHCI + config EXYNOS4_DEV_PD bool help @@ -134,9 +139,9 @@ config MACH_ARMLEX4210 select S3C_DEV_HSMMC select S3C_DEV_HSMMC2 select S3C_DEV_HSMMC3 + select EXYNOS4_DEV_AHCI select EXYNOS4_DEV_SYSMMU select EXYNOS4_SETUP_SDHCI - select SATA_AHCI_PLATFORM help Machine support for Samsung ARMLEX4210 based on EXYNOS4210 diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-exynos4/Makefile index b8f0e7d82d7..9be104f63c0 100644 --- a/arch/arm/mach-exynos4/Makefile +++ b/arch/arm/mach-exynos4/Makefile @@ -39,6 +39,7 @@ obj-$(CONFIG_MACH_NURI) += mach-nuri.o # device support obj-y += dev-audio.o +obj-$(CONFIG_EXYNOS4_DEV_AHCI) += dev-ahci.o obj-$(CONFIG_EXYNOS4_DEV_PD) += dev-pd.o obj-$(CONFIG_EXYNOS4_DEV_SYSMMU) += dev-sysmmu.o @@ -53,4 +54,3 @@ obj-$(CONFIG_EXYNOS4_SETUP_I2C7) += setup-i2c7.o obj-$(CONFIG_EXYNOS4_SETUP_KEYPAD) += setup-keypad.o obj-$(CONFIG_EXYNOS4_SETUP_SDHCI) += setup-sdhci.o obj-$(CONFIG_EXYNOS4_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o -obj-$(CONFIG_SATA_AHCI_PLATFORM) += dev-ahci.o diff --git a/arch/arm/mach-exynos4/include/mach/debug-macro.S b/arch/arm/mach-exynos4/include/mach/debug-macro.S index 58bbd049a6c..a442ef86116 100644 --- a/arch/arm/mach-exynos4/include/mach/debug-macro.S +++ b/arch/arm/mach-exynos4/include/mach/debug-macro.S @@ -21,8 +21,8 @@ */ .macro addruart, rp, rv - ldreq \rp, = S3C_PA_UART - ldrne \rv, = S3C_VA_UART + ldr \rp, = S3C_PA_UART + ldr \rv, = S3C_VA_UART #if CONFIG_DEBUG_S3C_UART != 0 add \rp, \rp, #(0x10000 * CONFIG_DEBUG_S3C_UART) add \rv, \rv, #(0x10000 * CONFIG_DEBUG_S3C_UART) diff --git a/arch/arm/mach-exynos4/mach-smdkc210.c b/arch/arm/mach-exynos4/mach-smdkc210.c index 25a25681812..e645f7a955f 100644 --- a/arch/arm/mach-exynos4/mach-smdkc210.c +++ b/arch/arm/mach-exynos4/mach-smdkc210.c @@ -125,7 +125,7 @@ static struct resource smdkc210_smsc911x_resources[] = { }; static struct smsc911x_platform_config smsc9215_config = { - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH, + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, .flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY, .phy_interface = PHY_INTERFACE_MODE_MII, diff --git a/arch/arm/mach-exynos4/mach-smdkv310.c b/arch/arm/mach-exynos4/mach-smdkv310.c index 88e0275143b..152676471b6 100644 --- a/arch/arm/mach-exynos4/mach-smdkv310.c +++ b/arch/arm/mach-exynos4/mach-smdkv310.c @@ -127,7 +127,7 @@ static struct resource smdkv310_smsc911x_resources[] = { }; static struct smsc911x_platform_config smsc9215_config = { - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH, + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, .flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY, .phy_interface = PHY_INTERFACE_MODE_MII, diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index c936c6d7ded..f3a7b101191 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -285,19 +285,6 @@ static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers) return 0; } -static struct regulator_init_data omap4_panda_vaux1 = { - .constraints = { - .min_uV = 1000000, - .max_uV = 3000000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, -}; - static struct regulator_init_data omap4_panda_vaux2 = { .constraints = { .min_uV = 1200000, @@ -353,19 +340,6 @@ static struct regulator_init_data omap4_panda_vpp = { }, }; -static struct regulator_init_data omap4_panda_vusim = { - .constraints = { - .min_uV = 1200000, - .max_uV = 2900000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, -}; - static struct regulator_init_data omap4_panda_vana = { .constraints = { .min_uV = 2100000, @@ -424,12 +398,10 @@ static struct twl4030_platform_data omap4_panda_twldata = { /* Regulators */ .vmmc = &omap4_panda_vmmc, .vpp = &omap4_panda_vpp, - .vusim = &omap4_panda_vusim, .vana = &omap4_panda_vana, .vcxio = &omap4_panda_vcxio, .vdac = &omap4_panda_vdac, .vusb = &omap4_panda_vusb, - .vaux1 = &omap4_panda_vaux1, .vaux2 = &omap4_panda_vaux2, .vaux3 = &omap4_panda_vaux3, .clk32kg = &omap4_panda_clk32kg, diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index e9785149284..84d1b735fe8 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -66,7 +66,7 @@ static int __init omap3_l3_init(void) WARN(IS_ERR(od), "could not build omap_device for %s\n", oh_name); - return PTR_ERR(od); + return IS_ERR(od) ? PTR_ERR(od) : 0; } postcore_initcall(omap3_l3_init); diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 674174365f7..493505c3b2f 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -693,6 +693,7 @@ static int __init gpmc_init(void) { u32 l, irq; int cs, ret = -EINVAL; + int gpmc_irq; char *ck = NULL; if (cpu_is_omap24xx()) { @@ -701,12 +702,15 @@ static int __init gpmc_init(void) l = OMAP2420_GPMC_BASE; else l = OMAP34XX_GPMC_BASE; + gpmc_irq = INT_34XX_GPMC_IRQ; } else if (cpu_is_omap34xx()) { ck = "gpmc_fck"; l = OMAP34XX_GPMC_BASE; + gpmc_irq = INT_34XX_GPMC_IRQ; } else if (cpu_is_omap44xx()) { ck = "gpmc_ck"; l = OMAP44XX_GPMC_BASE; + gpmc_irq = OMAP44XX_IRQ_GPMC; } if (WARN_ON(!ck)) @@ -739,16 +743,17 @@ static int __init gpmc_init(void) /* initalize the irq_chained */ irq = OMAP_GPMC_IRQ_BASE; for (cs = 0; cs < GPMC_CS_NUM; cs++) { - set_irq_handler(irq, handle_simple_irq); + set_irq_chip_and_handler(irq, &dummy_irq_chip, + handle_simple_irq); set_irq_flags(irq, IRQF_VALID); irq++; } - ret = request_irq(INT_34XX_GPMC_IRQ, + ret = request_irq(gpmc_irq, gpmc_handle_irq, IRQF_SHARED, "gpmc", gpmc_base); if (ret) pr_err("gpmc: irq-%d could not claim: err %d\n", - INT_34XX_GPMC_IRQ, ret); + gpmc_irq, ret); return ret; } postcore_initcall(gpmc_init); @@ -757,8 +762,6 @@ static irqreturn_t gpmc_handle_irq(int irq, void *dev) { u8 cs; - if (irq != INT_34XX_GPMC_IRQ) - return IRQ_HANDLED; /* check cs to invoke the irq */ cs = ((gpmc_read_reg(GPMC_PREFETCH_CONFIG1)) >> CS_NUM_SHIFT) & 0x7; if (OMAP_GPMC_IRQ_BASE+cs <= OMAP_GPMC_IRQ_END) diff --git a/arch/arm/mach-omap2/omap_l3_smx.c b/arch/arm/mach-omap2/omap_l3_smx.c index 265bff3acb9..5f2da7565b6 100644 --- a/arch/arm/mach-omap2/omap_l3_smx.c +++ b/arch/arm/mach-omap2/omap_l3_smx.c @@ -226,7 +226,6 @@ static int __init omap3_l3_probe(struct platform_device *pdev) struct omap3_l3 *l3; struct resource *res; int ret; - int irq; l3 = kzalloc(sizeof(*l3), GFP_KERNEL); if (!l3) { @@ -249,18 +248,17 @@ static int __init omap3_l3_probe(struct platform_device *pdev) goto err2; } - irq = platform_get_irq(pdev, 0); - ret = request_irq(irq, omap3_l3_app_irq, + l3->debug_irq = platform_get_irq(pdev, 0); + ret = request_irq(l3->debug_irq, omap3_l3_app_irq, IRQF_DISABLED | IRQF_TRIGGER_RISING, "l3-debug-irq", l3); if (ret) { dev_err(&pdev->dev, "couldn't request debug irq\n"); goto err3; } - l3->debug_irq = irq; - irq = platform_get_irq(pdev, 1); - ret = request_irq(irq, omap3_l3_app_irq, + l3->app_irq = platform_get_irq(pdev, 1); + ret = request_irq(l3->app_irq, omap3_l3_app_irq, IRQF_DISABLED | IRQF_TRIGGER_RISING, "l3-app-irq", l3); @@ -269,7 +267,6 @@ static int __init omap3_l3_probe(struct platform_device *pdev) goto err4; } - l3->app_irq = irq; goto err0; err4: diff --git a/arch/arm/mach-s5p64x0/cpu.c b/arch/arm/mach-s5p64x0/cpu.c index b8d02eb4cf3..a5c00952ea3 100644 --- a/arch/arm/mach-s5p64x0/cpu.c +++ b/arch/arm/mach-s5p64x0/cpu.c @@ -119,7 +119,7 @@ void __init s5p6450_map_io(void) s3c_adc_setname("s3c64xx-adc"); iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc)); - iotable_init(s5p6450_iodesc, ARRAY_SIZE(s5p6440_iodesc)); + iotable_init(s5p6450_iodesc, ARRAY_SIZE(s5p6450_iodesc)); } /* diff --git a/arch/arm/mach-s5pv210/include/mach/irqs.h b/arch/arm/mach-s5pv210/include/mach/irqs.h index 26710b35ef8..b9f9ec33384 100644 --- a/arch/arm/mach-s5pv210/include/mach/irqs.h +++ b/arch/arm/mach-s5pv210/include/mach/irqs.h @@ -99,9 +99,9 @@ #define IRQ_TC IRQ_PENDN #define IRQ_KEYPAD S5P_IRQ_VIC2(25) #define IRQ_CG S5P_IRQ_VIC2(26) -#define IRQ_SEC S5P_IRQ_VIC2(27) -#define IRQ_SECRX S5P_IRQ_VIC2(28) -#define IRQ_SECTX S5P_IRQ_VIC2(29) +#define IRQ_SSS_INT S5P_IRQ_VIC2(27) +#define IRQ_SSS_HASH S5P_IRQ_VIC2(28) +#define IRQ_PCM2 S5P_IRQ_VIC2(29) #define IRQ_SDMIRQ S5P_IRQ_VIC2(30) #define IRQ_SDMFIQ S5P_IRQ_VIC2(31) diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c index bc08ac42e7c..c6a9e86c2d5 100644 --- a/arch/arm/mach-s5pv210/mach-smdkv210.c +++ b/arch/arm/mach-s5pv210/mach-smdkv210.c @@ -44,7 +44,6 @@ #include <plat/keypad.h> #include <plat/pm.h> #include <plat/fb.h> -#include <plat/gpio-cfg.h> #include <plat/s5p-time.h> /* Following are default values for UCON, ULCON and UFCON UART registers */ diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index 203b986280f..58626013aa3 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -23,6 +23,7 @@ menu "Ux500 target platform" config MACH_U8500 bool "U8500 Development platform" depends on UX500_SOC_DB8500 + select TPS6105X help Include support for the mop500 development platform. diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c index 875c91b2f8a..9ed0f90cfe2 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.c +++ b/arch/arm/mach-ux500/board-mop500-regulators.c @@ -13,6 +13,30 @@ #include <linux/regulator/ab8500.h> #include "board-mop500-regulators.h" +/* + * TPS61052 regulator + */ +static struct regulator_consumer_supply tps61052_vaudio_consumers[] = { + /* + * Boost converter supply to raise voltage on audio speaker, this + * is actually connected to three pins, VInVhfL (left amplifier) + * VInVhfR (right amplifier) and VIntDClassInt - all three must + * be connected to the same voltage. + */ + REGULATOR_SUPPLY("vintdclassint", "ab8500-codec.0"), +}; + +struct regulator_init_data tps61052_regulator = { + .constraints = { + .name = "vaudio-hf", + .min_uV = 4500000, + .max_uV = 4500000, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(tps61052_vaudio_consumers), + .consumer_supplies = tps61052_vaudio_consumers, +}; + static struct regulator_consumer_supply ab8500_vaux1_consumers[] = { /* External displays, connector on board 2v5 power supply */ REGULATOR_SUPPLY("vaux12v5", "mcde.0"), @@ -62,6 +86,182 @@ static struct regulator_consumer_supply ab8500_vana_consumers[] = { REGULATOR_SUPPLY("vsmps2", "mcde.0"), }; +/* ab8500 regulator register initialization */ +struct ab8500_regulator_reg_init +ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = { + /* + * VanaRequestCtrl = HP/LP depending on VxRequest + * VextSupply1RequestCtrl = HP/LP depending on VxRequest + */ + INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL2, 0x00), + /* + * VextSupply2RequestCtrl = HP/LP depending on VxRequest + * VextSupply3RequestCtrl = HP/LP depending on VxRequest + * Vaux1RequestCtrl = HP/LP depending on VxRequest + * Vaux2RequestCtrl = HP/LP depending on VxRequest + */ + INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL3, 0x00), + /* + * Vaux3RequestCtrl = HP/LP depending on VxRequest + * SwHPReq = Control through SWValid disabled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL4, 0x00), + /* + * VanaSysClkReq1HPValid = disabled + * Vaux1SysClkReq1HPValid = disabled + * Vaux2SysClkReq1HPValid = disabled + * Vaux3SysClkReq1HPValid = disabled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID1, 0x00), + /* + * VextSupply1SysClkReq1HPValid = disabled + * VextSupply2SysClkReq1HPValid = disabled + * VextSupply3SysClkReq1HPValid = SysClkReq1 controlled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID2, 0x40), + /* + * VanaHwHPReq1Valid = disabled + * Vaux1HwHPreq1Valid = disabled + * Vaux2HwHPReq1Valid = disabled + * Vaux3HwHPReqValid = disabled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID1, 0x00), + /* + * VextSupply1HwHPReq1Valid = disabled + * VextSupply2HwHPReq1Valid = disabled + * VextSupply3HwHPReq1Valid = disabled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID2, 0x00), + /* + * VanaHwHPReq2Valid = disabled + * Vaux1HwHPReq2Valid = disabled + * Vaux2HwHPReq2Valid = disabled + * Vaux3HwHPReq2Valid = disabled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID1, 0x00), + /* + * VextSupply1HwHPReq2Valid = disabled + * VextSupply2HwHPReq2Valid = disabled + * VextSupply3HwHPReq2Valid = HWReq2 controlled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID2, 0x04), + /* + * VanaSwHPReqValid = disabled + * Vaux1SwHPReqValid = disabled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID1, 0x00), + /* + * Vaux2SwHPReqValid = disabled + * Vaux3SwHPReqValid = disabled + * VextSupply1SwHPReqValid = disabled + * VextSupply2SwHPReqValid = disabled + * VextSupply3SwHPReqValid = disabled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID2, 0x00), + /* + * SysClkReq2Valid1 = SysClkReq2 controlled + * SysClkReq3Valid1 = disabled + * SysClkReq4Valid1 = SysClkReq4 controlled + * SysClkReq5Valid1 = disabled + * SysClkReq6Valid1 = SysClkReq6 controlled + * SysClkReq7Valid1 = disabled + * SysClkReq8Valid1 = disabled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID1, 0x2a), + /* + * SysClkReq2Valid2 = disabled + * SysClkReq3Valid2 = disabled + * SysClkReq4Valid2 = disabled + * SysClkReq5Valid2 = disabled + * SysClkReq6Valid2 = SysClkReq6 controlled + * SysClkReq7Valid2 = disabled + * SysClkReq8Valid2 = disabled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID2, 0x20), + /* + * VTVoutEna = disabled + * Vintcore12Ena = disabled + * Vintcore12Sel = 1.25 V + * Vintcore12LP = inactive (HP) + * VTVoutLP = inactive (HP) + */ + INIT_REGULATOR_REGISTER(AB8500_REGUMISC1, 0x10), + /* + * VaudioEna = disabled + * VdmicEna = disabled + * Vamic1Ena = disabled + * Vamic2Ena = disabled + */ + INIT_REGULATOR_REGISTER(AB8500_VAUDIOSUPPLY, 0x00), + /* + * Vamic1_dzout = high-Z when Vamic1 is disabled + * Vamic2_dzout = high-Z when Vamic2 is disabled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUCTRL1VAMIC, 0x00), + /* + * VPll = Hw controlled + * VanaRegu = force off + */ + INIT_REGULATOR_REGISTER(AB8500_VPLLVANAREGU, 0x02), + /* + * VrefDDREna = disabled + * VrefDDRSleepMode = inactive (no pulldown) + */ + INIT_REGULATOR_REGISTER(AB8500_VREFDDR, 0x00), + /* + * VextSupply1Regu = HW control + * VextSupply2Regu = HW control + * VextSupply3Regu = HW control + * ExtSupply2Bypass = ExtSupply12LPn ball is 0 when Ena is 0 + * ExtSupply3Bypass = ExtSupply3LPn ball is 0 when Ena is 0 + */ + INIT_REGULATOR_REGISTER(AB8500_EXTSUPPLYREGU, 0x2a), + /* + * Vaux1Regu = force HP + * Vaux2Regu = force off + */ + INIT_REGULATOR_REGISTER(AB8500_VAUX12REGU, 0x01), + /* + * Vaux3regu = force off + */ + INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3REGU, 0x00), + /* + * Vsmps1 = 1.15V + */ + INIT_REGULATOR_REGISTER(AB8500_VSMPS1SEL1, 0x24), + /* + * Vaux1Sel = 2.5 V + */ + INIT_REGULATOR_REGISTER(AB8500_VAUX1SEL, 0x08), + /* + * Vaux2Sel = 2.9 V + */ + INIT_REGULATOR_REGISTER(AB8500_VAUX2SEL, 0x0d), + /* + * Vaux3Sel = 2.91 V + */ + INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3SEL, 0x07), + /* + * VextSupply12LP = disabled (no LP) + */ + INIT_REGULATOR_REGISTER(AB8500_REGUCTRL2SPARE, 0x00), + /* + * Vaux1Disch = short discharge time + * Vaux2Disch = short discharge time + * Vaux3Disch = short discharge time + * Vintcore12Disch = short discharge time + * VTVoutDisch = short discharge time + * VaudioDisch = short discharge time + */ + INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH, 0x00), + /* + * VanaDisch = short discharge time + * VdmicPullDownEna = pulldown disabled when Vdmic is disabled + * VdmicDisch = short discharge time + */ + INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH2, 0x00), +}; + /* AB8500 regulators */ struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { /* supplies to the display/camera */ @@ -72,6 +272,7 @@ struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { .max_uV = 2900000, .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, + .boot_on = 1, /* must be on for display */ }, .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux1_consumers), .consumer_supplies = ab8500_vaux1_consumers, diff --git a/arch/arm/mach-ux500/board-mop500-regulators.h b/arch/arm/mach-ux500/board-mop500-regulators.h index 2675fae5253..94992158d96 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.h +++ b/arch/arm/mach-ux500/board-mop500-regulators.h @@ -14,6 +14,9 @@ #include <linux/regulator/machine.h> #include <linux/regulator/ab8500.h> +extern struct ab8500_regulator_reg_init +ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS]; extern struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS]; +extern struct regulator_init_data tps61052_regulator; #endif diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 8790d984cac..dc8746d7826 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -20,7 +20,10 @@ #include <linux/amba/serial.h> #include <linux/spi/spi.h> #include <linux/mfd/ab8500.h> +#include <linux/regulator/ab8500.h> #include <linux/mfd/tc3589x.h> +#include <linux/mfd/tps6105x.h> +#include <linux/mfd/ab8500/gpio.h> #include <linux/leds-lp5521.h> #include <linux/input.h> #include <linux/gpio_keys.h> @@ -41,10 +44,35 @@ #include "board-mop500.h" #include "board-mop500-regulators.h" +static struct ab8500_gpio_platform_data ab8500_gpio_pdata = { + .gpio_base = MOP500_AB8500_GPIO(0), + .irq_base = MOP500_AB8500_VIR_GPIO_IRQ_BASE, + /* config_reg is the initial configuration of ab8500 pins. + * The pins can be configured as GPIO or alt functions based + * on value present in GpioSel1 to GpioSel6 and AlternatFunction + * register. This is the array of 7 configuration settings. + * One has to compile time decide these settings. Below is the + * explaination of these setting + * GpioSel1 = 0x00 => Pins GPIO1 to GPIO8 are not used as GPIO + * GpioSel2 = 0x1E => Pins GPIO10 to GPIO13 are configured as GPIO + * GpioSel3 = 0x80 => Pin GPIO24 is configured as GPIO + * GpioSel4 = 0x01 => Pin GPIo25 is configured as GPIO + * GpioSel5 = 0x7A => Pins GPIO34, GPIO36 to GPIO39 are conf as GPIO + * GpioSel6 = 0x00 => Pins GPIO41 & GPIo42 are not configured as GPIO + * AlternaFunction = 0x00 => If Pins GPIO10 to 13 are not configured + * as GPIO then this register selectes the alternate fucntions + */ + .config_reg = {0x00, 0x1E, 0x80, 0x01, + 0x7A, 0x00, 0x00}, +}; + static struct ab8500_platform_data ab8500_platdata = { .irq_base = MOP500_AB8500_IRQ_BASE, + .regulator_reg_init = ab8500_regulator_reg_init, + .num_regulator_reg_init = ARRAY_SIZE(ab8500_regulator_reg_init), .regulator = ab8500_regulators, .num_regulator = ARRAY_SIZE(ab8500_regulators), + .gpio = &ab8500_gpio_pdata, }; static struct resource ab8500_resources[] = { @@ -66,6 +94,15 @@ struct platform_device ab8500_device = { }; /* + * TPS61052 + */ + +static struct tps6105x_platform_data mop500_tps61052_data = { + .mode = TPS6105X_MODE_VOLTAGE, + .regulator_data = &tps61052_regulator, +}; + +/* * TC35892 */ @@ -135,7 +172,7 @@ static struct lp5521_platform_data __initdata lp5521_sec_data = { .clock_mode = LP5521_CLOCK_EXT, }; -static struct i2c_board_info mop500_i2c0_devices[] = { +static struct i2c_board_info __initdata mop500_i2c0_devices[] = { { I2C_BOARD_INFO("tc3589x", 0x42), .irq = NOMADIK_GPIO_TO_IRQ(217), @@ -143,6 +180,14 @@ static struct i2c_board_info mop500_i2c0_devices[] = { }, }; +/* I2C0 devices only available prior to HREFv60 */ +static struct i2c_board_info __initdata mop500_i2c0_old_devices[] = { + { + I2C_BOARD_INFO("tps61052", 0x33), + .platform_data = &mop500_tps61052_data, + }, +}; + static struct i2c_board_info __initdata mop500_i2c2_devices[] = { { /* lp5521 LED driver, 1st device */ @@ -405,6 +450,9 @@ static void __init mop500_init_machine(void) i2c_register_board_info(0, mop500_i2c0_devices, ARRAY_SIZE(mop500_i2c0_devices)); + if (!machine_is_hrefv60()) + i2c_register_board_info(0, mop500_i2c0_old_devices, + ARRAY_SIZE(mop500_i2c0_old_devices)); i2c_register_board_info(2, mop500_i2c2_devices, ARRAY_SIZE(mop500_i2c2_devices)); } diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h index 56722f4be71..03a31cc9b08 100644 --- a/arch/arm/mach-ux500/board-mop500.h +++ b/arch/arm/mach-ux500/board-mop500.h @@ -27,6 +27,10 @@ #define GPIO_BU21013_CS MOP500_EGPIO(13) #define GPIO_SDMMC_EN MOP500_EGPIO(17) #define GPIO_SDMMC_1V8_3V_SEL MOP500_EGPIO(18) +#define MOP500_EGPIO_END MOP500_EGPIO(24) + +/* GPIOs on the AB8500 mixed-signals circuit */ +#define MOP500_AB8500_GPIO(x) (MOP500_EGPIO_END + (x)) struct i2c_board_info; diff --git a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h index 7cdeb2af0eb..97ef55f8493 100644 --- a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h +++ b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h @@ -35,9 +35,20 @@ #define MOP500_STMPE1601_IRQBASE MOP500_EGPIO_IRQ_END #define MOP500_STMPE1601_IRQ(x) (MOP500_STMPE1601_IRQBASE + (x)) -#define MOP500_NR_IRQS MOP500_STMPE1601_IRQ(STMPE_NR_INTERNAL_IRQS) +#define MOP500_STMPE1601_IRQ_END \ + MOP500_STMPE1601_IRQ(STMPE_NR_INTERNAL_IRQS) -#define MOP500_IRQ_END MOP500_NR_IRQS +/* AB8500 virtual gpio IRQ */ +#define AB8500_VIR_GPIO_NR_IRQS 16 + +#define MOP500_AB8500_VIR_GPIO_IRQ_BASE \ + MOP500_STMPE1601_IRQ_END +#define MOP500_AB8500_VIR_GPIO_IRQ_END \ + (MOP500_AB8500_VIR_GPIO_IRQ_BASE + AB8500_VIR_GPIO_NR_IRQS) + +#define MOP500_NR_IRQS MOP500_AB8500_VIR_GPIO_IRQ_END + +#define MOP500_IRQ_END MOP500_NR_IRQS #if MOP500_IRQ_END > IRQ_BOARD_END #undef IRQ_BOARD_END diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h index d7792837046..5a25098ea7e 100644 --- a/arch/arm/plat-omap/include/plat/irqs.h +++ b/arch/arm/plat-omap/include/plat/irqs.h @@ -416,7 +416,7 @@ /* GPMC related */ #define OMAP_GPMC_IRQ_BASE (TWL_IRQ_END) -#define OMAP_GPMC_NR_IRQS 7 +#define OMAP_GPMC_NR_IRQS 8 #define OMAP_GPMC_IRQ_END (OMAP_GPMC_IRQ_BASE + OMAP_GPMC_NR_IRQS) diff --git a/arch/arm/plat-omap/include/plat/onenand.h b/arch/arm/plat-omap/include/plat/onenand.h index cbe897ca7f9..2858667d2e4 100644 --- a/arch/arm/plat-omap/include/plat/onenand.h +++ b/arch/arm/plat-omap/include/plat/onenand.h @@ -32,6 +32,7 @@ struct omap_onenand_platform_data { int dma_channel; u8 flags; u8 regulator_can_sleep; + u8 skip_initial_unlocking; }; #define ONENAND_MAX_PARTITIONS 8 diff --git a/arch/arm/plat-pxa/include/plat/pxa3xx_nand.h b/arch/arm/plat-pxa/include/plat/pxa3xx_nand.h index 01a8448e471..442301fe48b 100644 --- a/arch/arm/plat-pxa/include/plat/pxa3xx_nand.h +++ b/arch/arm/plat-pxa/include/plat/pxa3xx_nand.h @@ -30,6 +30,7 @@ struct pxa3xx_nand_cmdset { }; struct pxa3xx_nand_flash { + char *name; uint32_t chip_id; unsigned int page_per_block; /* Pages per block (PG_PER_BLK) */ unsigned int page_size; /* Page size in bytes (PAGE_SZ) */ @@ -37,7 +38,6 @@ struct pxa3xx_nand_flash { unsigned int dfc_width; /* Width of flash controller(DWIDTH_C) */ unsigned int num_blocks; /* Number of physical blocks in Flash */ - struct pxa3xx_nand_cmdset *cmdset; /* NAND command set */ struct pxa3xx_nand_timing *timing; /* NAND Flash timing */ }; diff --git a/arch/arm/plat-s5p/cpu.c b/arch/arm/plat-s5p/cpu.c index c3bfe9b13ac..5cf5e721e6c 100644 --- a/arch/arm/plat-s5p/cpu.c +++ b/arch/arm/plat-s5p/cpu.c @@ -39,7 +39,7 @@ static const char name_exynos4210[] = "EXYNOS4210"; static struct cpu_table cpu_ids[] __initdata = { { .idcode = 0x56440100, - .idmask = 0xffffff00, + .idmask = 0xfffff000, .map_io = s5p6440_map_io, .init_clocks = s5p6440_init_clocks, .init_uarts = s5p6440_init_uarts, @@ -47,7 +47,7 @@ static struct cpu_table cpu_ids[] __initdata = { .name = name_s5p6440, }, { .idcode = 0x36442000, - .idmask = 0xffffff00, + .idmask = 0xfffff000, .map_io = s5p6442_map_io, .init_clocks = s5p6442_init_clocks, .init_uarts = s5p6442_init_uarts, @@ -55,7 +55,7 @@ static struct cpu_table cpu_ids[] __initdata = { .name = name_s5p6442, }, { .idcode = 0x36450000, - .idmask = 0xffffff00, + .idmask = 0xfffff000, .map_io = s5p6450_map_io, .init_clocks = s5p6450_init_clocks, .init_uarts = s5p6450_init_uarts, @@ -79,7 +79,7 @@ static struct cpu_table cpu_ids[] __initdata = { .name = name_s5pv210, }, { .idcode = 0x43210000, - .idmask = 0xfffff000, + .idmask = 0xfffe0000, .map_io = exynos4_map_io, .init_clocks = exynos4_init_clocks, .init_uarts = exynos4_init_uarts, diff --git a/arch/arm/plat-samsung/init.c b/arch/arm/plat-samsung/init.c index 6790edfaca6..79d10fca909 100644 --- a/arch/arm/plat-samsung/init.c +++ b/arch/arm/plat-samsung/init.c @@ -36,7 +36,7 @@ static struct cpu_table * __init s3c_lookup_cpu(unsigned long idcode, unsigned int count) { for (; count != 0; count--, tab++) { - if ((idcode & tab->idmask) == tab->idcode) + if ((idcode & tab->idmask) == (tab->idcode & tab->idmask)) return tab; } diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig index 4db5b46e1ef..617925ddd14 100644 --- a/arch/cris/Kconfig +++ b/arch/cris/Kconfig @@ -276,7 +276,6 @@ config ETRAX_AXISFLASHMAP select MTD_CHAR select MTD_BLOCK select MTD_PARTITIONS - select MTD_CONCAT select MTD_COMPLEX_MAPPINGS help This option enables MTD mapping of flash devices. Needed to use @@ -297,8 +296,7 @@ config ETRAX_RTC choice prompt "RTC chip" depends on ETRAX_RTC - default ETRAX_PCF8563 if ETRAX_ARCH_V32 - default ETRAX_DS1302 if ETRAX_ARCH_V10 + default ETRAX_DS1302 config ETRAX_DS1302 depends on ETRAX_ARCH_V10 diff --git a/arch/cris/arch-v10/drivers/axisflashmap.c b/arch/cris/arch-v10/drivers/axisflashmap.c index b2079703af7..ed708e19d09 100644 --- a/arch/cris/arch-v10/drivers/axisflashmap.c +++ b/arch/cris/arch-v10/drivers/axisflashmap.c @@ -234,7 +234,6 @@ static struct mtd_info *flash_probe(void) } if (mtd_cse0 && mtd_cse1) { -#ifdef CONFIG_MTD_CONCAT struct mtd_info *mtds[] = { mtd_cse0, mtd_cse1 }; /* Since the concatenation layer adds a small overhead we @@ -246,11 +245,6 @@ static struct mtd_info *flash_probe(void) */ mtd_cse = mtd_concat_create(mtds, ARRAY_SIZE(mtds), "cse0+cse1"); -#else - printk(KERN_ERR "%s and %s: Cannot concatenate due to kernel " - "(mis)configuration!\n", map_cse0.name, map_cse1.name); - mtd_cse = NULL; -#endif if (!mtd_cse) { printk(KERN_ERR "%s and %s: Concatenation failed!\n", map_cse0.name, map_cse1.name); diff --git a/arch/cris/arch-v10/drivers/pcf8563.c b/arch/cris/arch-v10/drivers/pcf8563.c index ea69faba9b6..1391b731ad1 100644 --- a/arch/cris/arch-v10/drivers/pcf8563.c +++ b/arch/cris/arch-v10/drivers/pcf8563.c @@ -345,7 +345,7 @@ static long pcf8563_unlocked_ioctl(struct file *filp, unsigned int cmd, unsigned int ret; mutex_lock(&pcf8563_mutex); - return pcf8563_ioctl(filp, cmd, arg); + ret = pcf8563_ioctl(filp, cmd, arg); mutex_unlock(&pcf8563_mutex); return ret; diff --git a/arch/cris/arch-v10/kernel/signal.c b/arch/cris/arch-v10/kernel/signal.c index b6be705c2a3..e78fe49a984 100644 --- a/arch/cris/arch-v10/kernel/signal.c +++ b/arch/cris/arch-v10/kernel/signal.c @@ -537,7 +537,7 @@ void do_signal(int canrestart, struct pt_regs *regs) RESTART_CRIS_SYS(regs); } if (regs->r10 == -ERESTART_RESTARTBLOCK) { - regs->r10 = __NR_restart_syscall; + regs->r9 = __NR_restart_syscall; regs->irp -= 2; } } diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig index a2dd740c590..1633b120aa8 100644 --- a/arch/cris/arch-v32/drivers/Kconfig +++ b/arch/cris/arch-v32/drivers/Kconfig @@ -406,7 +406,6 @@ config ETRAX_AXISFLASHMAP select MTD_CHAR select MTD_BLOCK select MTD_PARTITIONS - select MTD_CONCAT select MTD_COMPLEX_MAPPINGS help This option enables MTD mapping of flash devices. Needed to use diff --git a/arch/cris/arch-v32/drivers/Makefile b/arch/cris/arch-v32/drivers/Makefile index e8c02437eda..39aa3c117a8 100644 --- a/arch/cris/arch-v32/drivers/Makefile +++ b/arch/cris/arch-v32/drivers/Makefile @@ -7,7 +7,6 @@ obj-$(CONFIG_ETRAX_AXISFLASHMAP) += axisflashmap.o obj-$(CONFIG_ETRAXFS) += mach-fs/ obj-$(CONFIG_CRIS_MACH_ARTPEC3) += mach-a3/ obj-$(CONFIG_ETRAX_IOP_FW_LOAD) += iop_fw_load.o -obj-$(CONFIG_ETRAX_PCF8563) += pcf8563.o obj-$(CONFIG_ETRAX_I2C) += i2c.o obj-$(CONFIG_ETRAX_SYNCHRONOUS_SERIAL) += sync_serial.o obj-$(CONFIG_PCI) += pci/ diff --git a/arch/cris/arch-v32/drivers/axisflashmap.c b/arch/cris/arch-v32/drivers/axisflashmap.c index 51e1e85df96..3d751250271 100644 --- a/arch/cris/arch-v32/drivers/axisflashmap.c +++ b/arch/cris/arch-v32/drivers/axisflashmap.c @@ -275,7 +275,6 @@ static struct mtd_info *flash_probe(void) } if (count > 1) { -#ifdef CONFIG_MTD_CONCAT /* Since the concatenation layer adds a small overhead we * could try to figure out if the chips in cse0 and cse1 are * identical and reprobe the whole cse0+cse1 window. But since @@ -284,11 +283,6 @@ static struct mtd_info *flash_probe(void) * complicating the probing procedure. */ mtd_total = mtd_concat_create(mtds, count, "cse0+cse1"); -#else - printk(KERN_ERR "%s and %s: Cannot concatenate due to kernel " - "(mis)configuration!\n", map_cse0.name, map_cse1.name); - mtd_toal = NULL; -#endif if (!mtd_total) { printk(KERN_ERR "%s and %s: Concatenation failed!\n", map_cse0.name, map_cse1.name); diff --git a/arch/cris/arch-v32/drivers/pcf8563.c b/arch/cris/arch-v32/drivers/pcf8563.c deleted file mode 100644 index b6e4fc0aad4..00000000000 --- a/arch/cris/arch-v32/drivers/pcf8563.c +++ /dev/null @@ -1,377 +0,0 @@ -/* - * PCF8563 RTC - * - * From Phillips' datasheet: - * - * The PCF8563 is a CMOS real-time clock/calendar optimized for low power - * consumption. A programmable clock output, interrupt output and voltage - * low detector are also provided. All address and data are transferred - * serially via two-line bidirectional I2C-bus. Maximum bus speed is - * 400 kbits/s. The built-in word address register is incremented - * automatically after each written or read byte. - * - * Copyright (c) 2002-2007, Axis Communications AB - * All rights reserved. - * - * Author: Tobias Anderberg <tobiasa@axis.com>. - * - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/sched.h> -#include <linux/init.h> -#include <linux/fs.h> -#include <linux/ioctl.h> -#include <linux/delay.h> -#include <linux/bcd.h> -#include <linux/mutex.h> - -#include <asm/uaccess.h> -#include <asm/system.h> -#include <asm/io.h> -#include <asm/rtc.h> - -#include "i2c.h" - -#define PCF8563_MAJOR 121 /* Local major number. */ -#define DEVICE_NAME "rtc" /* Name which is registered in /proc/devices. */ -#define PCF8563_NAME "PCF8563" -#define DRIVER_VERSION "$Revision: 1.17 $" - -/* Two simple wrapper macros, saves a few keystrokes. */ -#define rtc_read(x) i2c_readreg(RTC_I2C_READ, x) -#define rtc_write(x,y) i2c_writereg(RTC_I2C_WRITE, x, y) - -static DEFINE_MUTEX(pcf8563_mutex); -static DEFINE_MUTEX(rtc_lock); /* Protect state etc */ - -static const unsigned char days_in_month[] = - { 0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 }; - -static long pcf8563_unlocked_ioctl(struct file *filp, unsigned int cmd, unsigned long arg); - -/* Cache VL bit value read at driver init since writing the RTC_SECOND - * register clears the VL status. - */ -static int voltage_low; - -static const struct file_operations pcf8563_fops = { - .owner = THIS_MODULE, - .unlocked_ioctl = pcf8563_unlocked_ioctl, - .llseek = noop_llseek, -}; - -unsigned char -pcf8563_readreg(int reg) -{ - unsigned char res = rtc_read(reg); - - /* The PCF8563 does not return 0 for unimplemented bits. */ - switch (reg) { - case RTC_SECONDS: - case RTC_MINUTES: - res &= 0x7F; - break; - case RTC_HOURS: - case RTC_DAY_OF_MONTH: - res &= 0x3F; - break; - case RTC_WEEKDAY: - res &= 0x07; - break; - case RTC_MONTH: - res &= 0x1F; - break; - case RTC_CONTROL1: - res &= 0xA8; - break; - case RTC_CONTROL2: - res &= 0x1F; - break; - case RTC_CLOCKOUT_FREQ: - case RTC_TIMER_CONTROL: - res &= 0x83; - break; - } - return res; -} - -void -pcf8563_writereg(int reg, unsigned char val) -{ - rtc_write(reg, val); -} - -void -get_rtc_time(struct rtc_time *tm) -{ - tm->tm_sec = rtc_read(RTC_SECONDS); - tm->tm_min = rtc_read(RTC_MINUTES); - tm->tm_hour = rtc_read(RTC_HOURS); - tm->tm_mday = rtc_read(RTC_DAY_OF_MONTH); - tm->tm_wday = rtc_read(RTC_WEEKDAY); - tm->tm_mon = rtc_read(RTC_MONTH); - tm->tm_year = rtc_read(RTC_YEAR); - - if (tm->tm_sec & 0x80) { - printk(KERN_ERR "%s: RTC Voltage Low - reliable date/time " - "information is no longer guaranteed!\n", PCF8563_NAME); - } - - tm->tm_year = bcd2bin(tm->tm_year) + - ((tm->tm_mon & 0x80) ? 100 : 0); - tm->tm_sec &= 0x7F; - tm->tm_min &= 0x7F; - tm->tm_hour &= 0x3F; - tm->tm_mday &= 0x3F; - tm->tm_wday &= 0x07; /* Not coded in BCD. */ - tm->tm_mon &= 0x1F; - - tm->tm_sec = bcd2bin(tm->tm_sec); - tm->tm_min = bcd2bin(tm->tm_min); - tm->tm_hour = bcd2bin(tm->tm_hour); - tm->tm_mday = bcd2bin(tm->tm_mday); - tm->tm_mon = bcd2bin(tm->tm_mon); - tm->tm_mon--; /* Month is 1..12 in RTC but 0..11 in linux */ -} - -int __init -pcf8563_init(void) -{ - static int res; - static int first = 1; - - if (!first) - return res; - first = 0; - - /* Initiate the i2c protocol. */ - res = i2c_init(); - if (res < 0) { - printk(KERN_CRIT "pcf8563_init: Failed to init i2c.\n"); - return res; - } - - /* - * First of all we need to reset the chip. This is done by - * clearing control1, control2 and clk freq and resetting - * all alarms. - */ - if (rtc_write(RTC_CONTROL1, 0x00) < 0) - goto err; - - if (rtc_write(RTC_CONTROL2, 0x00) < 0) - goto err; - - if (rtc_write(RTC_CLOCKOUT_FREQ, 0x00) < 0) - goto err; - - if (rtc_write(RTC_TIMER_CONTROL, 0x03) < 0) - goto err; - - /* Reset the alarms. */ - if (rtc_write(RTC_MINUTE_ALARM, 0x80) < 0) - goto err; - - if (rtc_write(RTC_HOUR_ALARM, 0x80) < 0) - goto err; - - if (rtc_write(RTC_DAY_ALARM, 0x80) < 0) - goto err; - - if (rtc_write(RTC_WEEKDAY_ALARM, 0x80) < 0) - goto err; - - /* Check for low voltage, and warn about it. */ - if (rtc_read(RTC_SECONDS) & 0x80) { - voltage_low = 1; - printk(KERN_WARNING "%s: RTC Voltage Low - reliable " - "date/time information is no longer guaranteed!\n", - PCF8563_NAME); - } - - return res; - -err: - printk(KERN_INFO "%s: Error initializing chip.\n", PCF8563_NAME); - res = -1; - return res; -} - -void __exit -pcf8563_exit(void) -{ - unregister_chrdev(PCF8563_MAJOR, DEVICE_NAME); -} - -/* - * ioctl calls for this driver. Why return -ENOTTY upon error? Because - * POSIX says so! - */ -static int pcf8563_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) -{ - /* Some sanity checks. */ - if (_IOC_TYPE(cmd) != RTC_MAGIC) - return -ENOTTY; - - if (_IOC_NR(cmd) > RTC_MAX_IOCTL) - return -ENOTTY; - - switch (cmd) { - case RTC_RD_TIME: - { - struct rtc_time tm; - - mutex_lock(&rtc_lock); - memset(&tm, 0, sizeof tm); - get_rtc_time(&tm); - - if (copy_to_user((struct rtc_time *) arg, &tm, - sizeof tm)) { - mutex_unlock(&rtc_lock); - return -EFAULT; - } - - mutex_unlock(&rtc_lock); - - return 0; - } - case RTC_SET_TIME: - { - int leap; - int year; - int century; - struct rtc_time tm; - - memset(&tm, 0, sizeof tm); - if (!capable(CAP_SYS_TIME)) - return -EPERM; - - if (copy_from_user(&tm, (struct rtc_time *) arg, - sizeof tm)) - return -EFAULT; - - /* Convert from struct tm to struct rtc_time. */ - tm.tm_year += 1900; - tm.tm_mon += 1; - - /* - * Check if tm.tm_year is a leap year. A year is a leap - * year if it is divisible by 4 but not 100, except - * that years divisible by 400 _are_ leap years. - */ - year = tm.tm_year; - leap = (tm.tm_mon == 2) && - ((year % 4 == 0 && year % 100 != 0) || year % 400 == 0); - - /* Perform some sanity checks. */ - if ((tm.tm_year < 1970) || - (tm.tm_mon > 12) || - (tm.tm_mday == 0) || - (tm.tm_mday > days_in_month[tm.tm_mon] + leap) || - (tm.tm_wday >= 7) || - (tm.tm_hour >= 24) || - (tm.tm_min >= 60) || - (tm.tm_sec >= 60)) - return -EINVAL; - - century = (tm.tm_year >= 2000) ? 0x80 : 0; - tm.tm_year = tm.tm_year % 100; - - tm.tm_year = bin2bcd(tm.tm_year); - tm.tm_mon = bin2bcd(tm.tm_mon); - tm.tm_mday = bin2bcd(tm.tm_mday); - tm.tm_hour = bin2bcd(tm.tm_hour); - tm.tm_min = bin2bcd(tm.tm_min); - tm.tm_sec = bin2bcd(tm.tm_sec); - tm.tm_mon |= century; - - mutex_lock(&rtc_lock); - - rtc_write(RTC_YEAR, tm.tm_year); - rtc_write(RTC_MONTH, tm.tm_mon); - rtc_write(RTC_WEEKDAY, tm.tm_wday); /* Not coded in BCD. */ - rtc_write(RTC_DAY_OF_MONTH, tm.tm_mday); - rtc_write(RTC_HOURS, tm.tm_hour); - rtc_write(RTC_MINUTES, tm.tm_min); - rtc_write(RTC_SECONDS, tm.tm_sec); - - mutex_unlock(&rtc_lock); - - return 0; - } - case RTC_VL_READ: - if (voltage_low) - printk(KERN_ERR "%s: RTC Voltage Low - " - "reliable date/time information is no " - "longer guaranteed!\n", PCF8563_NAME); - - if (copy_to_user((int *) arg, &voltage_low, sizeof(int))) - return -EFAULT; - return 0; - - case RTC_VL_CLR: - { - /* Clear the VL bit in the seconds register in case - * the time has not been set already (which would - * have cleared it). This does not really matter - * because of the cached voltage_low value but do it - * anyway for consistency. */ - - int ret = rtc_read(RTC_SECONDS); - - rtc_write(RTC_SECONDS, (ret & 0x7F)); - - /* Clear the cached value. */ - voltage_low = 0; - - return 0; - } - default: - return -ENOTTY; - } - - return 0; -} - -static long pcf8563_unlocked_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) -{ - int ret; - - mutex_lock(&pcf8563_mutex); - return pcf8563_ioctl(filp, cmd, arg); - mutex_unlock(&pcf8563_mutex); - - return ret; -} - -static int __init pcf8563_register(void) -{ - if (pcf8563_init() < 0) { - printk(KERN_INFO "%s: Unable to initialize Real-Time Clock " - "Driver, %s\n", PCF8563_NAME, DRIVER_VERSION); - return -1; - } - - if (register_chrdev(PCF8563_MAJOR, DEVICE_NAME, &pcf8563_fops) < 0) { - printk(KERN_INFO "%s: Unable to get major numer %d for RTC " - "device.\n", PCF8563_NAME, PCF8563_MAJOR); - return -1; - } - - printk(KERN_INFO "%s Real-Time Clock Driver, %s\n", PCF8563_NAME, - DRIVER_VERSION); - - /* Check for low voltage, and warn about it. */ - if (voltage_low) { - printk(KERN_WARNING "%s: RTC Voltage Low - reliable date/time " - "information is no longer guaranteed!\n", PCF8563_NAME); - } - - return 0; -} - -module_init(pcf8563_register); -module_exit(pcf8563_exit); diff --git a/arch/score/Kconfig b/arch/score/Kconfig index 27b2295f41f..4278bbc032c 100644 --- a/arch/score/Kconfig +++ b/arch/score/Kconfig @@ -3,6 +3,8 @@ menu "Machine selection" config SCORE def_bool y select HAVE_GENERIC_HARDIRQS + select GENERIC_HARDIRQS_NO_DEPRECATED + select GENERIC_IRQ_SHOW choice prompt "System type" diff --git a/arch/score/include/asm/irqflags.h b/arch/score/include/asm/irqflags.h index 5c7563891e2..37c6ac9dd6e 100644 --- a/arch/score/include/asm/irqflags.h +++ b/arch/score/include/asm/irqflags.h @@ -29,7 +29,7 @@ static inline unsigned long arch_local_save_flags(void) static inline unsigned long arch_local_irq_save(void) { - unsigned long flags + unsigned long flags; asm volatile( " mfcr r8, cr0 \n" diff --git a/arch/score/kernel/irq.c b/arch/score/kernel/irq.c index 47647dde09c..d4196732c65 100644 --- a/arch/score/kernel/irq.c +++ b/arch/score/kernel/irq.c @@ -52,9 +52,9 @@ asmlinkage void do_IRQ(int irq) irq_exit(); } -static void score_mask(unsigned int irq_nr) +static void score_mask(struct irq_data *d) { - unsigned int irq_source = 63 - irq_nr; + unsigned int irq_source = 63 - d->irq; if (irq_source < 32) __raw_writel((__raw_readl(SCORE_PIC + INT_MASKL) | \ @@ -64,9 +64,9 @@ static void score_mask(unsigned int irq_nr) (1 << (irq_source - 32))), SCORE_PIC + INT_MASKH); } -static void score_unmask(unsigned int irq_nr) +static void score_unmask(struct irq_data *d) { - unsigned int irq_source = 63 - irq_nr; + unsigned int irq_source = 63 - d->irq; if (irq_source < 32) __raw_writel((__raw_readl(SCORE_PIC + INT_MASKL) & \ @@ -78,9 +78,9 @@ static void score_unmask(unsigned int irq_nr) struct irq_chip score_irq_chip = { .name = "Score7-level", - .mask = score_mask, - .mask_ack = score_mask, - .unmask = score_unmask, + .irq_mask = score_mask, + .irq_mask_ack = score_mask, + .irq_unmask = score_unmask, }; /* @@ -92,7 +92,7 @@ void __init init_IRQ(void) unsigned long target_addr; for (index = 0; index < NR_IRQS; ++index) - set_irq_chip_and_handler(index, &score_irq_chip, + irq_set_chip_and_handler(index, &score_irq_chip, handle_level_irq); for (target_addr = IRQ_VECTOR_BASE_ADDR; @@ -109,40 +109,3 @@ void __init init_IRQ(void) : : "r" (EXCEPTION_VECTOR_BASE_ADDR | \ VECTOR_ADDRESS_OFFSET_MODE16)); } - -/* - * Generic, controller-independent functions: - */ -int show_interrupts(struct seq_file *p, void *v) -{ - int i = *(loff_t *)v, cpu; - struct irqaction *action; - unsigned long flags; - - if (i == 0) { - seq_puts(p, " "); - for_each_online_cpu(cpu) - seq_printf(p, "CPU%d ", cpu); - seq_putc(p, '\n'); - } - - if (i < NR_IRQS) { - spin_lock_irqsave(&irq_desc[i].lock, flags); - action = irq_desc[i].action; - if (!action) - goto unlock; - - seq_printf(p, "%3d: ", i); - seq_printf(p, "%10u ", kstat_irqs(i)); - seq_printf(p, " %8s", irq_desc[i].chip->name ? : "-"); - seq_printf(p, " %s", action->name); - for (action = action->next; action; action = action->next) - seq_printf(p, ", %s", action->name); - - seq_putc(p, '\n'); -unlock: - spin_unlock_irqrestore(&irq_desc[i].lock, flags); - } - - return 0; -} diff --git a/arch/tile/Kconfig b/arch/tile/Kconfig index f3b78701c21..5e34a9fee9b 100644 --- a/arch/tile/Kconfig +++ b/arch/tile/Kconfig @@ -12,6 +12,7 @@ config TILE select GENERIC_IRQ_PROBE select GENERIC_PENDING_IRQ if SMP select GENERIC_HARDIRQS_NO_DEPRECATED + select GENERIC_IRQ_SHOW # FIXME: investigate whether we need/want these options. # select HAVE_IOREMAP_PROT diff --git a/arch/tile/kernel/irq.c b/arch/tile/kernel/irq.c index 0baa7580121..aa0134db2dd 100644 --- a/arch/tile/kernel/irq.c +++ b/arch/tile/kernel/irq.c @@ -241,14 +241,14 @@ void tile_irq_activate(unsigned int irq, int tile_irq_type) irq_flow_handler_t handle = handle_level_irq; if (tile_irq_type == TILE_IRQ_PERCPU) handle = handle_percpu_irq; - set_irq_chip_and_handler(irq, &tile_irq_chip, handle); + irq_set_chip_and_handler(irq, &tile_irq_chip, handle); /* * Flag interrupts that are hardware-cleared so that ack() * won't clear them. */ if (tile_irq_type == TILE_IRQ_HW_CLEAR) - set_irq_chip_data(irq, (void *)IS_HW_CLEARED); + irq_set_chip_data(irq, (void *)IS_HW_CLEARED); } EXPORT_SYMBOL(tile_irq_activate); @@ -262,47 +262,6 @@ void ack_bad_irq(unsigned int irq) * Generic, controller-independent functions: */ -int show_interrupts(struct seq_file *p, void *v) -{ - int i = *(loff_t *) v, j; - struct irqaction *action; - unsigned long flags; - - if (i == 0) { - seq_printf(p, " "); - for (j = 0; j < NR_CPUS; j++) - if (cpu_online(j)) - seq_printf(p, "CPU%-8d", j); - seq_putc(p, '\n'); - } - - if (i < NR_IRQS) { - struct irq_desc *desc = irq_to_desc(i); - - raw_spin_lock_irqsave(&desc->lock, flags); - action = desc->action; - if (!action) - goto skip; - seq_printf(p, "%3d: ", i); -#ifndef CONFIG_SMP - seq_printf(p, "%10u ", kstat_irqs(i)); -#else - for_each_online_cpu(j) - seq_printf(p, "%10u ", kstat_irqs_cpu(i, j)); -#endif - seq_printf(p, " %14s", get_irq_desc_chip(desc)->name); - seq_printf(p, " %s", action->name); - - for (action = action->next; action; action = action->next) - seq_printf(p, ", %s", action->name); - - seq_putc(p, '\n'); -skip: - raw_spin_unlock_irqrestore(&desc->lock, flags); - } - return 0; -} - #if CHIP_HAS_IPI() int create_irq(void) { diff --git a/arch/x86/crypto/aesni-intel_asm.S b/arch/x86/crypto/aesni-intel_asm.S index adcf794b22e..be6d9e365a8 100644 --- a/arch/x86/crypto/aesni-intel_asm.S +++ b/arch/x86/crypto/aesni-intel_asm.S @@ -1612,6 +1612,7 @@ _zero_cipher_left_encrypt: movdqa SHUF_MASK(%rip), %xmm10 PSHUFB_XMM %xmm10, %xmm0 + ENCRYPT_SINGLE_BLOCK %xmm0, %xmm1 # Encrypt(K, Yn) sub $16, %r11 add %r13, %r11 @@ -1634,7 +1635,9 @@ _zero_cipher_left_encrypt: # GHASH computation for the last <16 byte block sub %r13, %r11 add $16, %r11 - PSHUFB_XMM %xmm10, %xmm1 + + movdqa SHUF_MASK(%rip), %xmm10 + PSHUFB_XMM %xmm10, %xmm0 # shuffle xmm0 back to output as ciphertext diff --git a/arch/x86/crypto/aesni-intel_glue.c b/arch/x86/crypto/aesni-intel_glue.c index e0e6340c8da..2577613fb32 100644 --- a/arch/x86/crypto/aesni-intel_glue.c +++ b/arch/x86/crypto/aesni-intel_glue.c @@ -828,9 +828,15 @@ static int rfc4106_init(struct crypto_tfm *tfm) struct cryptd_aead *cryptd_tfm; struct aesni_rfc4106_gcm_ctx *ctx = (struct aesni_rfc4106_gcm_ctx *) PTR_ALIGN((u8 *)crypto_tfm_ctx(tfm), AESNI_ALIGN); + struct crypto_aead *cryptd_child; + struct aesni_rfc4106_gcm_ctx *child_ctx; cryptd_tfm = cryptd_alloc_aead("__driver-gcm-aes-aesni", 0, 0); if (IS_ERR(cryptd_tfm)) return PTR_ERR(cryptd_tfm); + + cryptd_child = cryptd_aead_child(cryptd_tfm); + child_ctx = aesni_rfc4106_gcm_ctx_get(cryptd_child); + memcpy(child_ctx, ctx, sizeof(*ctx)); ctx->cryptd_tfm = cryptd_tfm; tfm->crt_aead.reqsize = sizeof(struct aead_request) + crypto_aead_reqsize(&cryptd_tfm->base); @@ -923,6 +929,9 @@ static int rfc4106_set_key(struct crypto_aead *parent, const u8 *key, int ret = 0; struct crypto_tfm *tfm = crypto_aead_tfm(parent); struct aesni_rfc4106_gcm_ctx *ctx = aesni_rfc4106_gcm_ctx_get(parent); + struct crypto_aead *cryptd_child = cryptd_aead_child(ctx->cryptd_tfm); + struct aesni_rfc4106_gcm_ctx *child_ctx = + aesni_rfc4106_gcm_ctx_get(cryptd_child); u8 *new_key_mem = NULL; if (key_len < 4) { @@ -966,6 +975,7 @@ static int rfc4106_set_key(struct crypto_aead *parent, const u8 *key, goto exit; } ret = rfc4106_set_hash_subkey(ctx->hash_subkey, key, key_len); + memcpy(child_ctx, ctx, sizeof(*ctx)); exit: kfree(new_key_mem); return ret; @@ -997,7 +1007,6 @@ static int rfc4106_encrypt(struct aead_request *req) int ret; struct crypto_aead *tfm = crypto_aead_reqtfm(req); struct aesni_rfc4106_gcm_ctx *ctx = aesni_rfc4106_gcm_ctx_get(tfm); - struct crypto_aead *cryptd_child = cryptd_aead_child(ctx->cryptd_tfm); if (!irq_fpu_usable()) { struct aead_request *cryptd_req = @@ -1006,6 +1015,7 @@ static int rfc4106_encrypt(struct aead_request *req) aead_request_set_tfm(cryptd_req, &ctx->cryptd_tfm->base); return crypto_aead_encrypt(cryptd_req); } else { + struct crypto_aead *cryptd_child = cryptd_aead_child(ctx->cryptd_tfm); kernel_fpu_begin(); ret = cryptd_child->base.crt_aead.encrypt(req); kernel_fpu_end(); @@ -1018,7 +1028,6 @@ static int rfc4106_decrypt(struct aead_request *req) int ret; struct crypto_aead *tfm = crypto_aead_reqtfm(req); struct aesni_rfc4106_gcm_ctx *ctx = aesni_rfc4106_gcm_ctx_get(tfm); - struct crypto_aead *cryptd_child = cryptd_aead_child(ctx->cryptd_tfm); if (!irq_fpu_usable()) { struct aead_request *cryptd_req = @@ -1027,6 +1036,7 @@ static int rfc4106_decrypt(struct aead_request *req) aead_request_set_tfm(cryptd_req, &ctx->cryptd_tfm->base); return crypto_aead_decrypt(cryptd_req); } else { + struct crypto_aead *cryptd_child = cryptd_aead_child(ctx->cryptd_tfm); kernel_fpu_begin(); ret = cryptd_child->base.crt_aead.decrypt(req); kernel_fpu_end(); diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h index a09e1f052d8..d475b4398d8 100644 --- a/arch/x86/include/asm/percpu.h +++ b/arch/x86/include/asm/percpu.h @@ -45,7 +45,7 @@ #include <linux/stringify.h> #ifdef CONFIG_SMP -#define __percpu_arg(x) "%%"__stringify(__percpu_seg)":%P" #x +#define __percpu_prefix "%%"__stringify(__percpu_seg)":" #define __my_cpu_offset percpu_read(this_cpu_off) /* @@ -62,9 +62,11 @@ (typeof(*(ptr)) __kernel __force *)tcp_ptr__; \ }) #else -#define __percpu_arg(x) "%P" #x +#define __percpu_prefix "" #endif +#define __percpu_arg(x) __percpu_prefix "%P" #x + /* * Initialized pointers to per-cpu variables needed for the boot * processor need to use these macros to get the proper address @@ -516,11 +518,11 @@ do { \ typeof(o2) __n2 = n2; \ typeof(o2) __dummy; \ alternative_io("call this_cpu_cmpxchg16b_emu\n\t" P6_NOP4, \ - "cmpxchg16b %%gs:(%%rsi)\n\tsetz %0\n\t", \ + "cmpxchg16b " __percpu_prefix "(%%rsi)\n\tsetz %0\n\t", \ X86_FEATURE_CX16, \ ASM_OUTPUT2("=a"(__ret), "=d"(__dummy)), \ "S" (&pcp1), "b"(__n1), "c"(__n2), \ - "a"(__o1), "d"(__o2)); \ + "a"(__o1), "d"(__o2) : "memory"); \ __ret; \ }) diff --git a/arch/x86/lib/cmpxchg16b_emu.S b/arch/x86/lib/cmpxchg16b_emu.S index 3e8b08a6de2..1e572c507d0 100644 --- a/arch/x86/lib/cmpxchg16b_emu.S +++ b/arch/x86/lib/cmpxchg16b_emu.S @@ -10,6 +10,12 @@ #include <asm/frame.h> #include <asm/dwarf2.h> +#ifdef CONFIG_SMP +#define SEG_PREFIX %gs: +#else +#define SEG_PREFIX +#endif + .text /* @@ -37,13 +43,13 @@ this_cpu_cmpxchg16b_emu: pushf cli - cmpq %gs:(%rsi), %rax + cmpq SEG_PREFIX(%rsi), %rax jne not_same - cmpq %gs:8(%rsi), %rdx + cmpq SEG_PREFIX 8(%rsi), %rdx jne not_same - movq %rbx, %gs:(%rsi) - movq %rcx, %gs:8(%rsi) + movq %rbx, SEG_PREFIX(%rsi) + movq %rcx, SEG_PREFIX 8(%rsi) popf mov $1, %al diff --git a/arch/x86/platform/olpc/olpc-xo1.c b/arch/x86/platform/olpc/olpc-xo1.c index 99513642a0e..ab81fb27176 100644 --- a/arch/x86/platform/olpc/olpc-xo1.c +++ b/arch/x86/platform/olpc/olpc-xo1.c @@ -72,9 +72,9 @@ static int __devinit olpc_xo1_probe(struct platform_device *pdev) dev_err(&pdev->dev, "can't fetch device resource info\n"); return -EIO; } - if (strcmp(pdev->name, "olpc-xo1-pms") == 0) + if (strcmp(pdev->name, "cs5535-pms") == 0) pms_base = res->start; - else if (strcmp(pdev->name, "olpc-xo1-ac-acpi") == 0) + else if (strcmp(pdev->name, "olpc-xo1-pm-acpi") == 0) acpi_base = res->start; /* If we have both addresses, we can override the poweroff hook */ @@ -90,9 +90,9 @@ static int __devexit olpc_xo1_remove(struct platform_device *pdev) { mfd_cell_disable(pdev); - if (strcmp(pdev->name, "olpc-xo1-pms") == 0) + if (strcmp(pdev->name, "cs5535-pms") == 0) pms_base = 0; - else if (strcmp(pdev->name, "olpc-xo1-acpi") == 0) + else if (strcmp(pdev->name, "olpc-xo1-pm-acpi") == 0) acpi_base = 0; pm_power_off = NULL; @@ -101,7 +101,7 @@ static int __devexit olpc_xo1_remove(struct platform_device *pdev) static struct platform_driver cs5535_pms_drv = { .driver = { - .name = "olpc-xo1-pms", + .name = "cs5535-pms", .owner = THIS_MODULE, }, .probe = olpc_xo1_probe, @@ -110,7 +110,7 @@ static struct platform_driver cs5535_pms_drv = { static struct platform_driver cs5535_acpi_drv = { .driver = { - .name = "olpc-xo1-acpi", + .name = "olpc-xo1-pm-acpi", .owner = THIS_MODULE, }, .probe = olpc_xo1_probe, @@ -121,22 +121,21 @@ static int __init olpc_xo1_init(void) { int r; - r = mfd_shared_platform_driver_register(&cs5535_pms_drv, "cs5535-pms"); + r = platform_driver_register(&cs5535_pms_drv); if (r) return r; - r = mfd_shared_platform_driver_register(&cs5535_acpi_drv, - "cs5535-acpi"); + r = platform_driver_register(&cs5535_acpi_drv); if (r) - mfd_shared_platform_driver_unregister(&cs5535_pms_drv); + platform_driver_unregister(&cs5535_pms_drv); return r; } static void __exit olpc_xo1_exit(void) { - mfd_shared_platform_driver_unregister(&cs5535_acpi_drv); - mfd_shared_platform_driver_unregister(&cs5535_pms_drv); + platform_driver_unregister(&cs5535_acpi_drv); + platform_driver_unregister(&cs5535_pms_drv); } MODULE_AUTHOR("Daniel Drake <dsd@laptop.org>"); |