diff options
Diffstat (limited to 'arch')
335 files changed, 4944 insertions, 2723 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index e2541981779..ae5d6152d97 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -306,9 +306,12 @@ choice config ARCH_MULTIPLATFORM bool "Allow multiple platforms to be selected" depends on MMU + select ARCH_WANT_OPTIONAL_GPIOLIB + select ARM_HAS_SG_CHAIN select ARM_PATCH_PHYS_VIRT select AUTO_ZRELADDR select COMMON_CLK + select GENERIC_CLOCKEVENTS select MULTI_IRQ_HANDLER select SPARSE_IRQ select USE_OF @@ -388,8 +391,6 @@ config ARCH_CLPS711X select CPU_ARM720T select GENERIC_CLOCKEVENTS select MFD_SYSCON - select MULTI_IRQ_HANDLER - select SPARSE_IRQ help Support for Cirrus Logic 711x/721x/731x based boards. @@ -657,9 +658,8 @@ config ARCH_PXA help Support for Intel/Marvell's PXA2xx/PXA3xx processor line. -config ARCH_MSM_NODT - bool "Qualcomm MSM" - select ARCH_MSM +config ARCH_MSM + bool "Qualcomm MSM (non-multiplatform)" select ARCH_REQUIRE_GPIOLIB select COMMON_CLK select GENERIC_CLOCKEVENTS @@ -898,7 +898,7 @@ config ARCH_MULTI_V5 bool "ARMv5 based platforms (ARM926T, XSCALE, PJ1, ...)" depends on !ARCH_MULTI_V6_V7 select ARCH_MULTI_V4_V5 - select CPU_ARM926T if (!CPU_ARM946E || CPU_ARM1020 || \ + select CPU_ARM926T if !(CPU_ARM946E || CPU_ARM1020 || \ CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || \ CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_FEROCEON) @@ -908,16 +908,18 @@ config ARCH_MULTI_V4_V5 config ARCH_MULTI_V6 bool "ARMv6 based platforms (ARM11)" select ARCH_MULTI_V6_V7 - select CPU_V6 + select CPU_V6K config ARCH_MULTI_V7 bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)" default y select ARCH_MULTI_V6_V7 select CPU_V7 + select HAVE_SMP config ARCH_MULTI_V6_V7 bool + select MIGHT_HAVE_CACHE_L2X0 config ARCH_MULTI_CPU_AUTO def_bool !(ARCH_MULTI_V4 || ARCH_MULTI_V4T || ARCH_MULTI_V6_V7) @@ -925,6 +927,13 @@ config ARCH_MULTI_CPU_AUTO endmenu +config ARCH_VIRT + bool "Dummy Virtual Machine" if ARCH_MULTI_V7 + select ARM_AMBA + select ARM_GIC + select ARM_PSCI + select HAVE_ARM_ARCH_TIMER + # # This is sorted alphabetically by mach-* pathname. However, plat-* # Kconfigs may be included either alphabetically (according to the @@ -1005,6 +1014,8 @@ source "arch/arm/plat-pxa/Kconfig" source "arch/arm/mach-mmp/Kconfig" +source "arch/arm/mach-qcom/Kconfig" + source "arch/arm/mach-realview/Kconfig" source "arch/arm/mach-rockchip/Kconfig" @@ -1048,8 +1059,6 @@ source "arch/arm/mach-versatile/Kconfig" source "arch/arm/mach-vexpress/Kconfig" source "arch/arm/plat-versatile/Kconfig" -source "arch/arm/mach-virt/Kconfig" - source "arch/arm/mach-vt8500/Kconfig" source "arch/arm/mach-w90x900/Kconfig" diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 0531da8e521..f4b656f789b 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -106,6 +106,11 @@ choice depends on ARCH_BCM2835 select DEBUG_UART_PL01X + config DEBUG_BCM_5301X + bool "Kernel low-level debugging on BCM5301X UART1" + depends on ARCH_BCM_5301X + select DEBUG_UART_PL01X + config DEBUG_BCM_KONA_UART bool "Kernel low-level debugging messages via BCM KONA UART" depends on ARCH_BCM @@ -956,7 +961,7 @@ config DEBUG_STI_UART config DEBUG_MSM_UART bool - depends on ARCH_MSM + depends on ARCH_MSM || ARCH_QCOM config DEBUG_LL_INCLUDE string @@ -1023,6 +1028,7 @@ config DEBUG_UART_PHYS default 0x101f1000 if ARCH_VERSATILE default 0x101fb000 if DEBUG_NOMADIK_UART default 0x16000000 if ARCH_INTEGRATOR + default 0x18000300 if DEBUG_BCM_5301X default 0x1c090000 if DEBUG_VEXPRESS_UART0_RS1 default 0x20060000 if DEBUG_RK29_UART0 default 0x20064000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2 @@ -1071,6 +1077,7 @@ config DEBUG_UART_VIRT default 0xf0009000 if DEBUG_CNS3XXX default 0xf01fb000 if DEBUG_NOMADIK_UART default 0xf0201000 if DEBUG_BCM2835 + default 0xf1000300 if DEBUG_BCM_5301X default 0xf11f1000 if ARCH_VERSATILE default 0xf1600000 if ARCH_INTEGRATOR default 0xf1c28000 if DEBUG_SUNXI_UART0 diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 08a9ef58d9c..dd1bd7ed77b 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -180,6 +180,7 @@ machine-$(CONFIG_ARCH_OMAP2PLUS) += omap2 machine-$(CONFIG_ARCH_ORION5X) += orion5x machine-$(CONFIG_ARCH_PICOXCELL) += picoxcell machine-$(CONFIG_ARCH_PXA) += pxa +machine-$(CONFIG_ARCH_QCOM) += qcom machine-$(CONFIG_ARCH_REALVIEW) += realview machine-$(CONFIG_ARCH_ROCKCHIP) += rockchip machine-$(CONFIG_ARCH_RPC) += rpc @@ -199,7 +200,6 @@ machine-$(CONFIG_ARCH_U300) += u300 machine-$(CONFIG_ARCH_U8500) += ux500 machine-$(CONFIG_ARCH_VERSATILE) += versatile machine-$(CONFIG_ARCH_VEXPRESS) += vexpress -machine-$(CONFIG_ARCH_VIRT) += virt machine-$(CONFIG_ARCH_VT8500) += vt8500 machine-$(CONFIG_ARCH_W90X900) += w90x900 machine-$(CONFIG_ARCH_ZYNQ) += zynq diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index b9d6a8b485e..f8581e49982 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -38,6 +38,7 @@ dtb-$(CONFIG_ARCH_AT91) += at91sam9g35ek.dtb dtb-$(CONFIG_ARCH_AT91) += at91sam9x25ek.dtb dtb-$(CONFIG_ARCH_AT91) += at91sam9x35ek.dtb # sama5d3 +dtb-$(CONFIG_ARCH_AT91) += at91-sama5d3_xplained.dtb dtb-$(CONFIG_ARCH_AT91) += sama5d31ek.dtb dtb-$(CONFIG_ARCH_AT91) += sama5d33ek.dtb dtb-$(CONFIG_ARCH_AT91) += sama5d34ek.dtb @@ -54,7 +55,7 @@ dtb-$(CONFIG_ARCH_BERLIN) += \ berlin2cd-google-chromecast.dtb dtb-$(CONFIG_ARCH_DAVINCI) += da850-enbw-cmc.dtb \ da850-evm.dtb -dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \ +dtb-$(CONFIG_MACH_DOVE) += dove-cm-a510.dtb \ dove-cubox.dtb \ dove-d2plug.dtb \ dove-d3plug.dtb \ @@ -81,8 +82,8 @@ dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \ ecx-2000.dtb dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \ integratorcp.dtb -dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb -dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \ +kirkwood := \ + kirkwood-cloudbox.dtb \ kirkwood-db-88f6281.dtb \ kirkwood-db-88f6282.dtb \ kirkwood-dns320.dtb \ @@ -116,11 +117,11 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \ kirkwood-topkick.dtb \ kirkwood-ts219-6281.dtb \ kirkwood-ts219-6282.dtb +dtb-$(CONFIG_ARCH_KIRKWOOD) += $(kirkwood) +dtb-$(CONFIG_MACH_KIRKWOOD) += $(kirkwood) +dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb dtb-$(CONFIG_ARCH_MOXART) += moxart-uc7112lx.dtb -dtb-$(CONFIG_ARCH_MSM) += qcom-msm8660-surf.dtb \ - qcom-msm8960-cdp.dtb \ - qcom-apq8074-dragonboard.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \ armada-370-mirabox.dtb \ armada-370-netgear-rn102.dtb \ @@ -208,7 +209,8 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ omap3-n900.dtb \ omap3-n9.dtb \ omap3-n950.dtb \ - omap3-tobi.dtb \ + omap3-overo-tobi.dtb \ + omap3-overo-storm-tobi.dtb \ omap3-gta04.dtb \ omap3-igep0020.dtb \ omap3-igep0030.dtb \ @@ -232,6 +234,9 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ dra7-evm.dtb dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb +dtb-$(CONFIG_ARCH_QCOM) += qcom-msm8660-surf.dtb \ + qcom-msm8960-cdp.dtb \ + qcom-apq8074-dragonboard.dtb dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \ ste-hrefprev60-stuib.dtb \ ste-hrefprev60-tvk.dtb \ diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index 4718ec4a4db..486880b7483 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -121,7 +121,7 @@ ti,model = "AM335x-EVMSK"; ti,audio-codec = <&tlv320aic3106>; ti,mcasp-controller = <&mcasp1>; - ti,codec-clock-rate = <24576000>; + ti,codec-clock-rate = <24000000>; ti,audio-routing = "Headphone Jack", "HPLOUT", "Headphone Jack", "HPROUT"; @@ -256,6 +256,12 @@ >; }; + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ + >; + }; + mcasp1_pins: mcasp1_pins { pinctrl-single,pins = < 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */ @@ -456,6 +462,9 @@ status = "okay"; vmmc-supply = <&vmmc_reg>; bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; }; &sham { diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi index 66609684d41..9480cf891f8 100644 --- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -23,6 +23,7 @@ gpio0 = &gpio0; gpio1 = &gpio1; gpio2 = &gpio2; + eth3 = ð3; }; cpus { @@ -291,7 +292,7 @@ interrupts = <91>; }; - ethernet@34000 { + eth3: ethernet@34000 { compatible = "marvell,armada-370-neta"; reg = <0x34000 0x4000>; interrupts = <14>; diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts new file mode 100644 index 00000000000..ce1375595e5 --- /dev/null +++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts @@ -0,0 +1,229 @@ +/* + * at91-sama5d3_xplained.dts - Device Tree file for the SAMA5D3 Xplained board + * + * Copyright (C) 2014 Atmel, + * 2014 Nicolas Ferre <nicolas.ferre@atmel.com> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +#include "sama5d36.dtsi" + +/ { + model = "SAMA5D3 Xplained"; + compatible = "atmel,sama5d3-xplained", "atmel,sama5d3", "atmel,sama5"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory { + reg = <0x20000000 0x10000000>; + }; + + ahb { + apb { + mmc0: mmc@f0000000 { + pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7 &pinctrl_mmc0_cd>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <8>; + cd-gpios = <&pioE 0 GPIO_ACTIVE_LOW>; + }; + }; + + spi0: spi@f0004000 { + cs-gpios = <&pioD 13 0>; + status = "okay"; + }; + + can0: can@f000c000 { + status = "okay"; + }; + + i2c0: i2c@f0014000 { + status = "okay"; + }; + + i2c1: i2c@f0018000 { + status = "okay"; + }; + + macb0: ethernet@f0028000 { + phy-mode = "rgmii"; + status = "okay"; + }; + + usart0: serial@f001c000 { + status = "okay"; + }; + + usart1: serial@f0020000 { + pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>; + status = "okay"; + }; + + uart0: serial@f0024000 { + status = "okay"; + }; + + mmc1: mmc@f8000000 { + pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioE 1 GPIO_ACTIVE_HIGH>; + }; + }; + + spi1: spi@f8008000 { + cs-gpios = <&pioC 25 0>, <0>, <0>, <&pioD 16 0>; + status = "okay"; + }; + + adc0: adc@f8018000 { + pinctrl-0 = < + &pinctrl_adc0_adtrg + &pinctrl_adc0_ad0 + &pinctrl_adc0_ad1 + &pinctrl_adc0_ad2 + &pinctrl_adc0_ad3 + &pinctrl_adc0_ad4 + &pinctrl_adc0_ad5 + &pinctrl_adc0_ad6 + &pinctrl_adc0_ad7 + &pinctrl_adc0_ad8 + &pinctrl_adc0_ad9 + >; + status = "okay"; + }; + + i2c2: i2c@f801c000 { + dmas = <0>, <0>; /* Do not use DMA for i2c2 */ + status = "okay"; + }; + + macb1: ethernet@f802c000 { + phy-mode = "rmii"; + status = "okay"; + }; + + dbgu: serial@ffffee00 { + status = "okay"; + }; + + pinctrl@fffff200 { + board { + pinctrl_mmc0_cd: mmc0_cd { + atmel,pins = + <AT91_PIOE 0 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; + }; + + pinctrl_mmc1_cd: mmc1_cd { + atmel,pins = + <AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; + }; + + pinctrl_usba_vbus: usba_vbus { + atmel,pins = + <AT91_PIOE 9 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PE9, conflicts with A9 */ + }; + }; + }; + + pmc: pmc@fffffc00 { + main: mainck { + clock-frequency = <12000000>; + }; + }; + }; + + nand0: nand@60000000 { + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + atmel,has-pmecc; + atmel,pmecc-cap = <4>; + atmel,pmecc-sector-size = <512>; + nand-on-flash-bbt; + status = "okay"; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x40000>; + }; + + bootloader@40000 { + label = "bootloader"; + reg = <0x40000 0x80000>; + }; + + bootloaderenv@c0000 { + label = "bootloader env"; + reg = <0xc0000 0xc0000>; + }; + + dtb@180000 { + label = "device tree"; + reg = <0x180000 0x80000>; + }; + + kernel@200000 { + label = "kernel"; + reg = <0x200000 0x600000>; + }; + + rootfs@800000 { + label = "rootfs"; + reg = <0x800000 0x0f800000>; + }; + }; + + usb0: gadget@00500000 { + atmel,vbus-gpio = <&pioE 9 GPIO_ACTIVE_HIGH>; /* PE9, conflicts with A9 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usba_vbus>; + status = "okay"; + }; + + usb1: ohci@00600000 { + num-ports = <3>; + atmel,vbus-gpio = <0 + &pioE 3 GPIO_ACTIVE_LOW + &pioE 4 GPIO_ACTIVE_LOW + >; + status = "okay"; + }; + + usb2: ehci@00700000 { + status = "okay"; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + + bp3 { + label = "PB_USER"; + gpios = <&pioE 29 GPIO_ACTIVE_LOW>; + linux,code = <0x104>; + gpio-key,wakeup; + }; + }; + + leds { + compatible = "gpio-leds"; + + d2 { + label = "d2"; + gpios = <&pioE 23 GPIO_ACTIVE_LOW>; /* PE23, conflicts with A23, CTS2 */ + linux,default-trigger = "heartbeat"; + }; + + d3 { + label = "d3"; + gpios = <&pioE 24 GPIO_ACTIVE_HIGH>; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index 0042f73068b..fece8665fb6 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -523,7 +523,7 @@ }; i2c0: i2c@fff88000 { - compatible = "atmel,at91sam9263-i2c"; + compatible = "atmel,at91sam9260-i2c"; reg = <0xfff88000 0x100>; interrupts = <13 IRQ_TYPE_LEVEL_HIGH 6>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index e9487f6f016..924a6a6ffd0 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -124,6 +124,10 @@ nand-on-flash-bbt; status = "okay"; }; + + usb0: ohci@00500000 { + status = "okay"; + }; }; leds { diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index 2b76524f4aa..187fd46b7b5 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -379,15 +379,6 @@ #clock-cells = <1>; }; - pmu_intc: pmu-interrupt-ctrl@d0050 { - compatible = "marvell,dove-pmu-intc"; - interrupt-controller; - #interrupt-cells = <1>; - reg = <0xd0050 0x8>; - interrupts = <33>; - marvell,#interrupts = <7>; - }; - pinctrl: pin-ctrl@d0200 { compatible = "marvell,dove-pinctrl"; reg = <0xd0200 0x10>; @@ -610,8 +601,6 @@ rtc: real-time-clock@d8500 { compatible = "marvell,orion-rtc"; reg = <0xd8500 0x20>; - interrupt-parent = <&pmu_intc>; - interrupts = <5>; }; gpio2: gpio-ctrl@e8400 { diff --git a/arch/arm/boot/dts/imx6dl-hummingboard.dts b/arch/arm/boot/dts/imx6dl-hummingboard.dts index fd8fc7cd53f..5bfae54fb78 100644 --- a/arch/arm/boot/dts/imx6dl-hummingboard.dts +++ b/arch/arm/boot/dts/imx6dl-hummingboard.dts @@ -52,12 +52,6 @@ }; }; - codec: spdif-transmitter { - compatible = "linux,spdif-dit"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hummingboard_spdif>; - }; - sound-spdif { compatible = "fsl,imx-audio-spdif"; model = "imx-spdif"; @@ -111,7 +105,7 @@ }; pinctrl_hummingboard_spdif: hummingboard-spdif { - fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0>; + fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>; }; pinctrl_hummingboard_usbh1_vbus: hummingboard-usbh1-vbus { @@ -142,6 +136,8 @@ }; &spdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_spdif>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi index 64daa3b311f..c2a24888a27 100644 --- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi +++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi @@ -46,12 +46,6 @@ }; }; - codec: spdif-transmitter { - compatible = "linux,spdif-dit"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_cubox_i_spdif>; - }; - sound-spdif { compatible = "fsl,imx-audio-spdif"; model = "imx-spdif"; @@ -89,7 +83,7 @@ }; pinctrl_cubox_i_spdif: cubox-i-spdif { - fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0>; + fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>; }; pinctrl_cubox_i_usbh1_vbus: cubox-i-usbh1-vbus { @@ -121,6 +115,8 @@ }; &spdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_cubox_i_spdif>; status = "okay"; }; diff --git a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts index dc86429756d..2cb0dc52916 100644 --- a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts +++ b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts @@ -122,4 +122,66 @@ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; }; }; + + dsa@0 { + compatible = "marvell,dsa"; + #address-cells = <2>; + #size-cells = <0>; + + dsa,ethernet = <ð0>; + dsa,mii-bus = <ðphy0>; + + switch@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0>; /* MDIO address 0, switch 0 in tree */ + + port@0 { + reg = <0>; + label = "lan1"; + }; + + port@1 { + reg = <1>; + label = "lan2"; + }; + + port@2 { + reg = <2>; + label = "lan3"; + }; + + port@3 { + reg = <3>; + label = "lan4"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + }; + }; + }; +}; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@ff { + reg = <0xff>; /* No phy attached */ + speed = <1000>; + duplex = <1>; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; }; diff --git a/arch/arm/boot/dts/omap3-gta04.dts b/arch/arm/boot/dts/omap3-gta04.dts index b9b55c95a56..c551e4af4d8 100644 --- a/arch/arm/boot/dts/omap3-gta04.dts +++ b/arch/arm/boot/dts/omap3-gta04.dts @@ -32,7 +32,7 @@ aux-button { label = "aux"; linux,code = <169>; - gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; gpio-key,wakeup; }; }; @@ -92,6 +92,8 @@ bmp085@77 { compatible = "bosch,bmp085"; reg = <0x77>; + interrupt-parent = <&gpio4>; + interrupts = <17 IRQ_TYPE_EDGE_RISING>; }; /* leds */ @@ -141,8 +143,8 @@ pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; vmmc-supply = <&vmmc1>; - vmmc_aux-supply = <&vsim>; bus-width = <4>; + ti,non-removable; }; &mmc2 { diff --git a/arch/arm/boot/dts/omap3-n9.dts b/arch/arm/boot/dts/omap3-n9.dts index 39828ce464e..9938b5dc190 100644 --- a/arch/arm/boot/dts/omap3-n9.dts +++ b/arch/arm/boot/dts/omap3-n9.dts @@ -14,5 +14,5 @@ / { model = "Nokia N9"; - compatible = "nokia,omap3-n9", "ti,omap3"; + compatible = "nokia,omap3-n9", "ti,omap36xx", "ti,omap3"; }; diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 6fc85f96353..0bf40c90fab 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -1,6 +1,6 @@ /* * Copyright (C) 2013 Pavel Machek <pavel@ucw.cz> - * Copyright 2013 Aaro Koskinen <aaro.koskinen@iki.fi> + * Copyright (C) 2013-2014 Aaro Koskinen <aaro.koskinen@iki.fi> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 (or later) as @@ -13,7 +13,7 @@ / { model = "Nokia N900"; - compatible = "nokia,omap3-n900", "ti,omap3"; + compatible = "nokia,omap3-n900", "ti,omap3430", "ti,omap3"; cpus { cpu@0 { diff --git a/arch/arm/boot/dts/omap3-n950.dts b/arch/arm/boot/dts/omap3-n950.dts index b076a526b99..261c5589bfa 100644 --- a/arch/arm/boot/dts/omap3-n950.dts +++ b/arch/arm/boot/dts/omap3-n950.dts @@ -14,5 +14,5 @@ / { model = "Nokia N950"; - compatible = "nokia,omap3-n950", "ti,omap3"; + compatible = "nokia,omap3-n950", "ti,omap36xx", "ti,omap3"; }; diff --git a/arch/arm/boot/dts/omap3-overo-storm-tobi.dts b/arch/arm/boot/dts/omap3-overo-storm-tobi.dts new file mode 100644 index 00000000000..966b5c9cd96 --- /dev/null +++ b/arch/arm/boot/dts/omap3-overo-storm-tobi.dts @@ -0,0 +1,22 @@ +/* + * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * Tobi expansion board is manufactured by Gumstix Inc. + */ + +/dts-v1/; + +#include "omap36xx.dtsi" +#include "omap3-overo-tobi-common.dtsi" + +/ { + model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Tobi"; + compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3"; +}; + diff --git a/arch/arm/boot/dts/omap3-tobi.dts b/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi index 7e4ad2aec37..4edc013a91c 100644 --- a/arch/arm/boot/dts/omap3-tobi.dts +++ b/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi @@ -13,9 +13,6 @@ #include "omap3-overo.dtsi" / { - model = "TI OMAP3 Gumstix Overo on Tobi"; - compatible = "ti,omap3-tobi", "ti,omap3-overo", "ti,omap3"; - leds { compatible = "gpio-leds"; heartbeat { diff --git a/arch/arm/boot/dts/omap3-overo-tobi.dts b/arch/arm/boot/dts/omap3-overo-tobi.dts new file mode 100644 index 00000000000..de5653e1b5c --- /dev/null +++ b/arch/arm/boot/dts/omap3-overo-tobi.dts @@ -0,0 +1,22 @@ +/* + * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * Tobi expansion board is manufactured by Gumstix Inc. + */ + +/dts-v1/; + +#include "omap34xx.dtsi" +#include "omap3-overo-tobi-common.dtsi" + +/ { + model = "OMAP35xx Gumstix Overo on Tobi"; + compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3"; +}; + diff --git a/arch/arm/boot/dts/omap3-overo.dtsi b/arch/arm/boot/dts/omap3-overo.dtsi index a461d2fd1fb..597099907f8 100644 --- a/arch/arm/boot/dts/omap3-overo.dtsi +++ b/arch/arm/boot/dts/omap3-overo.dtsi @@ -9,9 +9,6 @@ /* * The Gumstix Overo must be combined with an expansion board. */ -/dts-v1/; - -#include "omap34xx.dtsi" / { pwmleds { diff --git a/arch/arm/boot/dts/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom-msm8660-surf.dts index 68a72f5507b..169bad90dac 100644 --- a/arch/arm/boot/dts/qcom-msm8660-surf.dts +++ b/arch/arm/boot/dts/qcom-msm8660-surf.dts @@ -1,63 +1,6 @@ -/dts-v1/; - -/include/ "skeleton.dtsi" - -#include <dt-bindings/clock/qcom,gcc-msm8660.h> +#include "qcom-msm8660.dtsi" / { model = "Qualcomm MSM8660 SURF"; compatible = "qcom,msm8660-surf", "qcom,msm8660"; - interrupt-parent = <&intc>; - - intc: interrupt-controller@2080000 { - compatible = "qcom,msm-8660-qgic"; - interrupt-controller; - #interrupt-cells = <3>; - reg = < 0x02080000 0x1000 >, - < 0x02081000 0x1000 >; - }; - - timer@2000000 { - compatible = "qcom,scss-timer", "qcom,msm-timer"; - interrupts = <1 0 0x301>, - <1 1 0x301>, - <1 2 0x301>; - reg = <0x02000000 0x100>; - clock-frequency = <27000000>, - <32768>; - cpu-offset = <0x40000>; - }; - - msmgpio: gpio@800000 { - compatible = "qcom,msm-gpio"; - reg = <0x00800000 0x4000>; - gpio-controller; - #gpio-cells = <2>; - ngpio = <173>; - interrupts = <0 16 0x4>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gcc: clock-controller@900000 { - compatible = "qcom,gcc-msm8660"; - #clock-cells = <1>; - #reset-cells = <1>; - reg = <0x900000 0x4000>; - }; - - serial@19c40000 { - compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; - reg = <0x19c40000 0x1000>, - <0x19c00000 0x1000>; - interrupts = <0 195 0x0>; - clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>; - clock-names = "core", "iface"; - }; - - qcom,ssbi@500000 { - compatible = "qcom,ssbi"; - reg = <0x500000 0x1000>; - qcom,controller-type = "pmic-arbiter"; - }; }; diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi new file mode 100644 index 00000000000..69d6c4edea3 --- /dev/null +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi @@ -0,0 +1,63 @@ +/dts-v1/; + +/include/ "skeleton.dtsi" + +#include <dt-bindings/clock/qcom,gcc-msm8660.h> + +/ { + model = "Qualcomm MSM8660"; + compatible = "qcom,msm8660"; + interrupt-parent = <&intc>; + + intc: interrupt-controller@2080000 { + compatible = "qcom,msm-8660-qgic"; + interrupt-controller; + #interrupt-cells = <3>; + reg = < 0x02080000 0x1000 >, + < 0x02081000 0x1000 >; + }; + + timer@2000000 { + compatible = "qcom,scss-timer", "qcom,msm-timer"; + interrupts = <1 0 0x301>, + <1 1 0x301>, + <1 2 0x301>; + reg = <0x02000000 0x100>; + clock-frequency = <27000000>, + <32768>; + cpu-offset = <0x40000>; + }; + + msmgpio: gpio@800000 { + compatible = "qcom,msm-gpio"; + reg = <0x00800000 0x4000>; + gpio-controller; + #gpio-cells = <2>; + ngpio = <173>; + interrupts = <0 16 0x4>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gcc: clock-controller@900000 { + compatible = "qcom,gcc-msm8660"; + #clock-cells = <1>; + #reset-cells = <1>; + reg = <0x900000 0x4000>; + }; + + serial@19c40000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x19c40000 0x1000>, + <0x19c00000 0x1000>; + interrupts = <0 195 0x0>; + clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>; + clock-names = "core", "iface"; + }; + + qcom,ssbi@500000 { + compatible = "qcom,ssbi"; + reg = <0x500000 0x1000>; + qcom,controller-type = "pmic-arbiter"; + }; +}; diff --git a/arch/arm/boot/dts/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts index 7c30de4fa30..a58fb88315f 100644 --- a/arch/arm/boot/dts/qcom-msm8960-cdp.dts +++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts @@ -1,70 +1,6 @@ -/dts-v1/; - -/include/ "skeleton.dtsi" - -#include <dt-bindings/clock/qcom,gcc-msm8960.h> +#include "qcom-msm8960.dtsi" / { model = "Qualcomm MSM8960 CDP"; compatible = "qcom,msm8960-cdp", "qcom,msm8960"; - interrupt-parent = <&intc>; - - intc: interrupt-controller@2000000 { - compatible = "qcom,msm-qgic2"; - interrupt-controller; - #interrupt-cells = <3>; - reg = < 0x02000000 0x1000 >, - < 0x02002000 0x1000 >; - }; - - timer@200a000 { - compatible = "qcom,kpss-timer", "qcom,msm-timer"; - interrupts = <1 1 0x301>, - <1 2 0x301>, - <1 3 0x301>; - reg = <0x0200a000 0x100>; - clock-frequency = <27000000>, - <32768>; - cpu-offset = <0x80000>; - }; - - msmgpio: gpio@800000 { - compatible = "qcom,msm-gpio"; - gpio-controller; - #gpio-cells = <2>; - ngpio = <150>; - interrupts = <0 16 0x4>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x800000 0x4000>; - }; - - gcc: clock-controller@900000 { - compatible = "qcom,gcc-msm8960"; - #clock-cells = <1>; - #reset-cells = <1>; - reg = <0x900000 0x4000>; - }; - - clock-controller@4000000 { - compatible = "qcom,mmcc-msm8960"; - reg = <0x4000000 0x1000>; - #clock-cells = <1>; - #reset-cells = <1>; - }; - - serial@16440000 { - compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; - reg = <0x16440000 0x1000>, - <0x16400000 0x1000>; - interrupts = <0 154 0x0>; - clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>; - clock-names = "core", "iface"; - }; - - qcom,ssbi@500000 { - compatible = "qcom,ssbi"; - reg = <0x500000 0x1000>; - qcom,controller-type = "pmic-arbiter"; - }; }; diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi new file mode 100644 index 00000000000..3a9c3caa9aa --- /dev/null +++ b/arch/arm/boot/dts/qcom-msm8960.dtsi @@ -0,0 +1,76 @@ +/dts-v1/; + +/include/ "skeleton.dtsi" + +#include <dt-bindings/clock/qcom,gcc-msm8960.h> + +/ { + model = "Qualcomm MSM8960"; + compatible = "qcom,msm8960"; + interrupt-parent = <&intc>; + + cpu-pmu { + compatible = "qcom,krait-pmu"; + interrupts = <1 10 0x304>; + qcom,no-pc-write; + }; + + intc: interrupt-controller@2000000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + #interrupt-cells = <3>; + reg = < 0x02000000 0x1000 >, + < 0x02002000 0x1000 >; + }; + + timer@200a000 { + compatible = "qcom,kpss-timer", "qcom,msm-timer"; + interrupts = <1 1 0x301>, + <1 2 0x301>, + <1 3 0x301>; + reg = <0x0200a000 0x100>; + clock-frequency = <27000000>, + <32768>; + cpu-offset = <0x80000>; + }; + + msmgpio: gpio@800000 { + compatible = "qcom,msm-gpio"; + gpio-controller; + #gpio-cells = <2>; + ngpio = <150>; + interrupts = <0 16 0x4>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x800000 0x4000>; + }; + + gcc: clock-controller@900000 { + compatible = "qcom,gcc-msm8960"; + #clock-cells = <1>; + #reset-cells = <1>; + reg = <0x900000 0x4000>; + }; + + clock-controller@4000000 { + compatible = "qcom,mmcc-msm8960"; + reg = <0x4000000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + serial@16440000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x16440000 0x1000>, + <0x16400000 0x1000>; + interrupts = <0 154 0x0>; + clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>; + clock-names = "core", "iface"; + }; + + qcom,ssbi@500000 { + compatible = "qcom,ssbi"; + reg = <0x500000 0x1000>; + qcom,controller-type = "pmic-arbiter"; + }; +}; diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index 9e5dadb101e..1eff4130cde 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -9,6 +9,11 @@ compatible = "qcom,msm8974"; interrupt-parent = <&intc>; + cpu-pmu { + compatible = "qcom,krait-pmu"; + interrupts = <1 7 0xf04>; + }; + soc: soc { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi index be5d2b09a36..4d4dfbb59f4 100644 --- a/arch/arm/boot/dts/rk3066a.dtsi +++ b/arch/arm/boot/dts/rk3066a.dtsi @@ -64,6 +64,19 @@ clock-names = "timer", "pclk"; }; + sram: sram@10080000 { + compatible = "mmio-sram"; + reg = <0x10080000 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x10080000 0x10000>; + + smp-sram@0 { + compatible = "rockchip,rk3066-smp-sram"; + reg = <0x0 0x50>; + }; + }; + pinctrl@20008000 { compatible = "rockchip,rk3066a-pinctrl"; reg = <0x20008000 0x150>; diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi index 1a26b03b364..bb36596ea20 100644 --- a/arch/arm/boot/dts/rk3188.dtsi +++ b/arch/arm/boot/dts/rk3188.dtsi @@ -60,6 +60,19 @@ interrupts = <GIC_PPI 13 0xf04>; }; + sram: sram@10080000 { + compatible = "mmio-sram"; + reg = <0x10080000 0x8000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x10080000 0x8000>; + + smp-sram@0 { + compatible = "rockchip,rk3066-smp-sram"; + reg = <0x0 0x50>; + }; + }; + pinctrl@20008000 { compatible = "rockchip,rk3188-pinctrl"; reg = <0x20008000 0xa0>, diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi index 0fcbcfd67de..26e5a968d49 100644 --- a/arch/arm/boot/dts/rk3xxx.dtsi +++ b/arch/arm/boot/dts/rk3xxx.dtsi @@ -26,6 +26,16 @@ compatible = "simple-bus"; ranges; + scu@1013c000 { + compatible = "arm,cortex-a9-scu"; + reg = <0x1013c000 0x100>; + }; + + pmu@20004000 { + compatible = "rockchip,rk3066-pmu"; + reg = <0x20004000 0x100>; + }; + gic: interrupt-controller@1013d000 { compatible = "arm,cortex-a9-gic"; interrupt-controller; diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index 52447c17537..3d5faf85f51 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -1228,7 +1228,7 @@ compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00600000 0x100000>; interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&usb>, <&uhphs_clk>, <&udphs_clk>, + clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck"; status = "disabled"; diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi index 0c1e8d871ed..6cb9b68e218 100644 --- a/arch/arm/boot/dts/ste-href.dtsi +++ b/arch/arm/boot/dts/ste-href.dtsi @@ -188,7 +188,6 @@ msp2: msp@80117000 { pinctrl-names = "default"; pinctrl-0 = <&msp2_default_mode>; - status = "okay"; }; msp3: msp@80125000 { diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index 040bb0eba15..10666ca8aee 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -315,7 +315,7 @@ ranges; emac: ethernet@01c0b000 { - compatible = "allwinner,sun4i-emac"; + compatible = "allwinner,sun4i-a10-emac"; reg = <0x01c0b000 0x1000>; interrupts = <55>; clocks = <&ahb_gates 17>; @@ -323,7 +323,7 @@ }; mdio@01c0b080 { - compatible = "allwinner,sun4i-mdio"; + compatible = "allwinner,sun4i-a10-mdio"; reg = <0x01c0b080 0x14>; status = "disabled"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi index ea16054857a..64961595e8d 100644 --- a/arch/arm/boot/dts/sun5i-a10s.dtsi +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi @@ -278,7 +278,7 @@ ranges; emac: ethernet@01c0b000 { - compatible = "allwinner,sun4i-emac"; + compatible = "allwinner,sun4i-a10-emac"; reg = <0x01c0b000 0x1000>; interrupts = <55>; clocks = <&ahb_gates 17>; @@ -286,7 +286,7 @@ }; mdio@01c0b080 { - compatible = "allwinner,sun4i-mdio"; + compatible = "allwinner,sun4i-a10-mdio"; reg = <0x01c0b080 0x14>; status = "disabled"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 119f066f0d9..9ff09484847 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -340,7 +340,7 @@ ranges; emac: ethernet@01c0b000 { - compatible = "allwinner,sun4i-emac"; + compatible = "allwinner,sun4i-a10-emac"; reg = <0x01c0b000 0x1000>; interrupts = <0 55 4>; clocks = <&ahb_gates 17>; @@ -348,7 +348,7 @@ }; mdio@01c0b080 { - compatible = "allwinner,sun4i-mdio"; + compatible = "allwinner,sun4i-a10-mdio"; reg = <0x01c0b080 0x14>; status = "disabled"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi index 389e987ec28..44ec401ec36 100644 --- a/arch/arm/boot/dts/tegra114.dtsi +++ b/arch/arm/boot/dts/tegra114.dtsi @@ -57,6 +57,8 @@ resets = <&tegra_car 27>; reset-names = "dc"; + nvidia,head = <0>; + rgb { status = "disabled"; }; @@ -72,6 +74,8 @@ resets = <&tegra_car 26>; reset-names = "dc"; + nvidia,head = <1>; + rgb { status = "disabled"; }; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 480ecda3416..48d2a7f4d0c 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -94,6 +94,8 @@ resets = <&tegra_car 27>; reset-names = "dc"; + nvidia,head = <0>; + rgb { status = "disabled"; }; @@ -109,6 +111,8 @@ resets = <&tegra_car 26>; reset-names = "dc"; + nvidia,head = <1>; + rgb { status = "disabled"; }; diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi index 9104224124e..1e156d9d050 100644 --- a/arch/arm/boot/dts/tegra30-cardhu.dtsi +++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi @@ -28,7 +28,7 @@ compatible = "nvidia,cardhu", "nvidia,tegra30"; aliases { - rtc0 = "/i2c@7000d000/tps6586x@34"; + rtc0 = "/i2c@7000d000/tps65911@2d"; rtc1 = "/rtc@7000e000"; }; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index ed8e7700b46..19a84e933f4 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -170,6 +170,8 @@ resets = <&tegra_car 27>; reset-names = "dc"; + nvidia,head = <0>; + rgb { status = "disabled"; }; @@ -185,6 +187,8 @@ resets = <&tegra_car 26>; reset-names = "dc"; + nvidia,head = <1>; + rgb { status = "disabled"; }; diff --git a/arch/arm/boot/dts/testcases/tests-interrupts.dtsi b/arch/arm/boot/dts/testcases/tests-interrupts.dtsi deleted file mode 100644 index c843720bd3e..00000000000 --- a/arch/arm/boot/dts/testcases/tests-interrupts.dtsi +++ /dev/null @@ -1,58 +0,0 @@ - -/ { - testcase-data { - interrupts { - #address-cells = <1>; - #size-cells = <1>; - test_intc0: intc0 { - interrupt-controller; - #interrupt-cells = <1>; - }; - - test_intc1: intc1 { - interrupt-controller; - #interrupt-cells = <3>; - }; - - test_intc2: intc2 { - interrupt-controller; - #interrupt-cells = <2>; - }; - - test_intmap0: intmap0 { - #interrupt-cells = <1>; - #address-cells = <0>; - interrupt-map = <1 &test_intc0 9>, - <2 &test_intc1 10 11 12>, - <3 &test_intc2 13 14>, - <4 &test_intc2 15 16>; - }; - - test_intmap1: intmap1 { - #interrupt-cells = <2>; - interrupt-map = <0x5000 1 2 &test_intc0 15>; - }; - - interrupts0 { - interrupt-parent = <&test_intc0>; - interrupts = <1>, <2>, <3>, <4>; - }; - - interrupts1 { - interrupt-parent = <&test_intmap0>; - interrupts = <1>, <2>, <3>, <4>; - }; - - interrupts-extended0 { - reg = <0x5000 0x100>; - interrupts-extended = <&test_intc0 1>, - <&test_intc1 2 3 4>, - <&test_intc2 5 6>, - <&test_intmap0 1>, - <&test_intmap0 2>, - <&test_intmap0 3>, - <&test_intmap1 1 2>; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/testcases/tests-phandle.dtsi b/arch/arm/boot/dts/testcases/tests-phandle.dtsi deleted file mode 100644 index 0007d3cd7dc..00000000000 --- a/arch/arm/boot/dts/testcases/tests-phandle.dtsi +++ /dev/null @@ -1,39 +0,0 @@ - -/ { - testcase-data { - phandle-tests { - provider0: provider0 { - #phandle-cells = <0>; - }; - - provider1: provider1 { - #phandle-cells = <1>; - }; - - provider2: provider2 { - #phandle-cells = <2>; - }; - - provider3: provider3 { - #phandle-cells = <3>; - }; - - consumer-a { - phandle-list = <&provider1 1>, - <&provider2 2 0>, - <0>, - <&provider3 4 4 3>, - <&provider2 5 100>, - <&provider0>, - <&provider1 7>; - phandle-list-names = "first", "second", "third"; - - phandle-list-bad-phandle = <12345678 0 0>; - phandle-list-bad-args = <&provider2 1 0>, - <&provider3 0>; - empty-property; - unterminated-string = [40 41 42 43]; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/testcases/tests.dtsi b/arch/arm/boot/dts/testcases/tests.dtsi deleted file mode 100644 index 3f123ecc9dd..00000000000 --- a/arch/arm/boot/dts/testcases/tests.dtsi +++ /dev/null @@ -1,2 +0,0 @@ -/include/ "tests-phandle.dtsi" -/include/ "tests-interrupts.dtsi" diff --git a/arch/arm/boot/dts/versatile-pb.dts b/arch/arm/boot/dts/versatile-pb.dts index f43907c40c9..65f65771132 100644 --- a/arch/arm/boot/dts/versatile-pb.dts +++ b/arch/arm/boot/dts/versatile-pb.dts @@ -1,4 +1,4 @@ -/include/ "versatile-ab.dts" +#include <versatile-ab.dts> / { model = "ARM Versatile PB"; @@ -47,4 +47,4 @@ }; }; -/include/ "testcases/tests.dtsi" +#include <testcases.dtsi> diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig index 6309ee52ccf..f1aeb7d7271 100644 --- a/arch/arm/configs/imx_v4_v5_defconfig +++ b/arch/arm/configs/imx_v4_v5_defconfig @@ -154,6 +154,7 @@ CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_MXC=y CONFIG_MMC=y +CONFIG_MMC_UNSAFE_RESUME=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_ESDHC_IMX=y diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 53e82c2523e..09e974392fa 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -39,6 +39,8 @@ CONFIG_SOC_IMX53=y CONFIG_SOC_IMX6Q=y CONFIG_SOC_IMX6SL=y CONFIG_SOC_VF610=y +CONFIG_PCI=y +CONFIG_PCI_IMX6=y CONFIG_SMP=y CONFIG_VMSPLIT_2G=y CONFIG_PREEMPT_VOLUNTARY=y @@ -165,6 +167,7 @@ CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_ANATOP=y CONFIG_REGULATOR_DA9052=y +CONFIG_REGULATOR_GPIO=y CONFIG_REGULATOR_MC13783=y CONFIG_REGULATOR_MC13892=y CONFIG_REGULATOR_PFUZE100=y @@ -186,6 +189,7 @@ CONFIG_LCD_L4F00242T03=y CONFIG_LCD_PLATFORM=y CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_BACKLIGHT_PWM=y +CONFIG_BACKLIGHT_GPIO=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y CONFIG_SOUND=y @@ -211,6 +215,7 @@ CONFIG_USB_GADGET=y CONFIG_USB_ETH=m CONFIG_USB_MASS_STORAGE=m CONFIG_MMC=y +CONFIG_MMC_UNSAFE_RESUME=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_ESDHC_IMX=y @@ -225,6 +230,7 @@ CONFIG_LEDS_TRIGGER_BACKLIGHT=y CONFIG_LEDS_TRIGGER_GPIO=y CONFIG_RTC_CLASS=y CONFIG_RTC_INTF_DEV_UIE_EMUL=y +CONFIG_RTC_DRV_PCF8563=y CONFIG_RTC_DRV_MC13XXX=y CONFIG_RTC_DRV_MXC=y CONFIG_RTC_DRV_SNVS=y @@ -277,6 +283,7 @@ CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_15=m CONFIG_NLS_UTF8=y +CONFIG_DEBUG_FS=y CONFIG_MAGIC_SYSRQ=y # CONFIG_SCHED_DEBUG is not set CONFIG_PROVE_LOCKING=y diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 845bc745706..1b4821bc5c7 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -11,6 +11,7 @@ CONFIG_ARCH_MVEBU=y CONFIG_MACH_ARMADA_370=y CONFIG_MACH_ARMADA_XP=y CONFIG_ARCH_BCM=y +CONFIG_ARCH_BCM_5301X=y CONFIG_ARCH_BCM_MOBILE=y CONFIG_ARCH_BERLIN=y CONFIG_MACH_BERLIN_BG2=y @@ -29,6 +30,7 @@ CONFIG_ARCH_OMAP3=y CONFIG_ARCH_OMAP4=y CONFIG_SOC_OMAP5=y CONFIG_SOC_AM33XX=y +CONFIG_SOC_DRA7XX=y CONFIG_SOC_AM43XX=y CONFIG_ARCH_ROCKCHIP=y CONFIG_ARCH_SOCFPGA=y diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 3a0b53d225e..364ba38e40f 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -28,6 +28,7 @@ CONFIG_ARCH_OMAP3=y CONFIG_ARCH_OMAP4=y CONFIG_SOC_OMAP5=y CONFIG_SOC_AM33XX=y +CONFIG_SOC_AM43XX=y CONFIG_SOC_DRA7XX=y CONFIG_ARM_THUMBEE=y CONFIG_ARM_ERRATA_411920=y diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h index e9a49fe0284..8b8b61685a3 100644 --- a/arch/arm/include/asm/cacheflush.h +++ b/arch/arm/include/asm/cacheflush.h @@ -212,6 +212,7 @@ extern void copy_to_user_page(struct vm_area_struct *, struct page *, static inline void __flush_icache_all(void) { __flush_icache_preferred(); + dsb(); } /* diff --git a/arch/arm/plat-orion/include/plat/cache-feroceon-l2.h b/arch/arm/include/asm/hardware/cache-feroceon-l2.h index 06f982d5569..12e1588dc4f 100644 --- a/arch/arm/plat-orion/include/plat/cache-feroceon-l2.h +++ b/arch/arm/include/asm/hardware/cache-feroceon-l2.h @@ -1,5 +1,5 @@ /* - * arch/arm/plat-orion/include/plat/cache-feroceon-l2.h + * arch/arm/include/asm/hardware/cache-feroceon-l2.h * * Copyright (C) 2008 Marvell Semiconductor * @@ -9,3 +9,5 @@ */ extern void __init feroceon_l2_init(int l2_wt_override); +extern int __init feroceon_of_init(void); + diff --git a/arch/arm/include/asm/pgtable-3level.h b/arch/arm/include/asm/pgtable-3level.h index 03243f7eedd..85c60adc8b6 100644 --- a/arch/arm/include/asm/pgtable-3level.h +++ b/arch/arm/include/asm/pgtable-3level.h @@ -120,13 +120,16 @@ /* * 2nd stage PTE definitions for LPAE. */ -#define L_PTE_S2_MT_UNCACHED (_AT(pteval_t, 0x5) << 2) /* MemAttr[3:0] */ -#define L_PTE_S2_MT_WRITETHROUGH (_AT(pteval_t, 0xa) << 2) /* MemAttr[3:0] */ -#define L_PTE_S2_MT_WRITEBACK (_AT(pteval_t, 0xf) << 2) /* MemAttr[3:0] */ -#define L_PTE_S2_RDONLY (_AT(pteval_t, 1) << 6) /* HAP[1] */ -#define L_PTE_S2_RDWR (_AT(pteval_t, 3) << 6) /* HAP[2:1] */ +#define L_PTE_S2_MT_UNCACHED (_AT(pteval_t, 0x0) << 2) /* strongly ordered */ +#define L_PTE_S2_MT_WRITETHROUGH (_AT(pteval_t, 0xa) << 2) /* normal inner write-through */ +#define L_PTE_S2_MT_WRITEBACK (_AT(pteval_t, 0xf) << 2) /* normal inner write-back */ +#define L_PTE_S2_MT_DEV_SHARED (_AT(pteval_t, 0x1) << 2) /* device */ +#define L_PTE_S2_MT_MASK (_AT(pteval_t, 0xf) << 2) -#define L_PMD_S2_RDWR (_AT(pmdval_t, 3) << 6) /* HAP[2:1] */ +#define L_PTE_S2_RDONLY (_AT(pteval_t, 1) << 6) /* HAP[1] */ +#define L_PTE_S2_RDWR (_AT(pteval_t, 3) << 6) /* HAP[2:1] */ + +#define L_PMD_S2_RDWR (_AT(pmdval_t, 3) << 6) /* HAP[2:1] */ /* * Hyp-mode PL2 PTE definitions for LPAE. diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h index 22a3b9b5d4a..772435b0820 100644 --- a/arch/arm/include/asm/smp.h +++ b/arch/arm/include/asm/smp.h @@ -114,6 +114,15 @@ struct smp_operations { #endif }; +struct of_cpu_method { + const char *method; + struct smp_operations *ops; +}; + +#define CPU_METHOD_OF_DECLARE(name, _method, _ops) \ + static const struct of_cpu_method __cpu_method_of_table_##name \ + __used __section(__cpu_method_of_table) \ + = { .method = _method, .ops = _ops } /* * set platform specific SMP operations */ diff --git a/arch/arm/include/asm/spinlock.h b/arch/arm/include/asm/spinlock.h index ef3c6072aa4..ac4bfae2670 100644 --- a/arch/arm/include/asm/spinlock.h +++ b/arch/arm/include/asm/spinlock.h @@ -37,18 +37,9 @@ static inline void dsb_sev(void) { -#if __LINUX_ARM_ARCH__ >= 7 - __asm__ __volatile__ ( - "dsb ishst\n" - SEV - ); -#else - __asm__ __volatile__ ( - "mcr p15, 0, %0, c7, c10, 4\n" - SEV - : : "r" (0) - ); -#endif + + dsb(ishst); + __asm__(SEV); } /* diff --git a/arch/arm/kernel/devtree.c b/arch/arm/kernel/devtree.c index f751714d52c..c7419a585dd 100644 --- a/arch/arm/kernel/devtree.c +++ b/arch/arm/kernel/devtree.c @@ -18,6 +18,7 @@ #include <linux/of_fdt.h> #include <linux/of_irq.h> #include <linux/of_platform.h> +#include <linux/smp.h> #include <asm/cputype.h> #include <asm/setup.h> @@ -63,6 +64,34 @@ void __init arm_dt_memblock_reserve(void) } } +#ifdef CONFIG_SMP +extern struct of_cpu_method __cpu_method_of_table_begin[]; +extern struct of_cpu_method __cpu_method_of_table_end[]; + +static int __init set_smp_ops_by_method(struct device_node *node) +{ + const char *method; + struct of_cpu_method *m = __cpu_method_of_table_begin; + + if (of_property_read_string(node, "enable-method", &method)) + return 0; + + for (; m < __cpu_method_of_table_end; m++) + if (!strcmp(m->method, method)) { + smp_set_ops(m->ops); + return 1; + } + + return 0; +} +#else +static inline int set_smp_ops_by_method(struct device_node *node) +{ + return 1; +} +#endif + + /* * arm_dt_init_cpu_maps - Function retrieves cpu nodes from the device tree * and builds the cpu logical map array containing MPIDR values related to @@ -79,6 +108,7 @@ void __init arm_dt_init_cpu_maps(void) * read as 0. */ struct device_node *cpu, *cpus; + int found_method = 0; u32 i, j, cpuidx = 1; u32 mpidr = is_smp() ? read_cpuid_mpidr() & MPIDR_HWID_BITMASK : 0; @@ -150,8 +180,18 @@ void __init arm_dt_init_cpu_maps(void) } tmp_map[i] = hwid; + + if (!found_method) + found_method = set_smp_ops_by_method(cpu); } + /* + * Fallback to an enable-method in the cpus node if nothing found in + * a cpu node. + */ + if (!found_method) + set_smp_ops_by_method(cpus); + if (!bootcpu_valid) { pr_warn("DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map\n"); return; diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index b0df9761de6..1e8b030dbef 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -731,7 +731,7 @@ static void __init request_standard_resources(const struct machine_desc *mdesc) kernel_data.end = virt_to_phys(_end - 1); for_each_memblock(memory, region) { - res = memblock_virt_alloc_low(sizeof(*res), 0); + res = memblock_virt_alloc(sizeof(*res), 0); res->name = "System RAM"; res->start = __pfn_to_phys(memblock_region_memory_base_pfn(region)); res->end = __pfn_to_phys(memblock_region_memory_end_pfn(region)) - 1; diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig index b1aa6a9b3bd..21474458aa5 100644 --- a/arch/arm/mach-bcm/Kconfig +++ b/arch/arm/mach-bcm/Kconfig @@ -16,12 +16,7 @@ config ARCH_BCM_MOBILE select ARM_ERRATA_754322 select ARM_ERRATA_764369 if SMP select ARM_GIC - select CPU_V7 - select CLKSRC_OF - select GENERIC_CLOCKEVENTS - select GENERIC_TIME select GPIO_BCM_KONA - select SPARSE_IRQ select TICK_ONESHOT select CACHE_L2X0 select HAVE_ARM_ARCH_TIMER @@ -32,6 +27,32 @@ config ARCH_BCM_MOBILE BCM11130, BCM11140, BCM11351, BCM28145 and BCM28155 variants. +config ARCH_BCM_5301X + bool "Broadcom BCM470X / BCM5301X ARM SoC" if ARCH_MULTI_V7 + depends on MMU + select ARM_GIC + select CACHE_L2X0 + select HAVE_ARM_SCU if SMP + select HAVE_ARM_TWD if SMP + select HAVE_SMP + select COMMON_CLK + select GENERIC_CLOCKEVENTS + select ARM_GLOBAL_TIMER + select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK + select MIGHT_HAVE_PCI + help + Support for Broadcom BCM470X and BCM5301X SoCs with ARM CPU cores. + + This is a network SoC line mostly used in home routers and + wifi access points, it's internal name is Northstar. + This inclused the following SoC: BCM53010, BCM53011, BCM53012, + BCM53014, BCM53015, BCM53016, BCM53017, BCM53018, BCM4707, + BCM4708 and BCM4709. + + Do not confuse this with the BCM4760 which is a totally + different SoC or with the older BCM47XX and BCM53XX based + network SoC using a MIPS CPU, they are supported by arch/mips/bcm47xx + endmenu endif diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile index c2ccd5a0f77..01649132c9f 100644 --- a/arch/arm/mach-bcm/Makefile +++ b/arch/arm/mach-bcm/Makefile @@ -13,3 +13,4 @@ obj-$(CONFIG_ARCH_BCM_MOBILE) := board_bcm281xx.o bcm_kona_smc.o bcm_kona_smc_asm.o kona.o plus_sec := $(call as-instr,.arch_extension sec,+sec) AFLAGS_bcm_kona_smc_asm.o :=-Wa,-march=armv7-a$(plus_sec) +obj-$(CONFIG_ARCH_BCM_5301X) += bcm_5301x.o diff --git a/arch/arm/mach-bcm/bcm_5301x.c b/arch/arm/mach-bcm/bcm_5301x.c new file mode 100644 index 00000000000..edff69761e0 --- /dev/null +++ b/arch/arm/mach-bcm/bcm_5301x.c @@ -0,0 +1,61 @@ +/* + * Broadcom BCM470X / BCM5301X ARM platform code. + * + * Copyright 2013 Hauke Mehrtens <hauke@hauke-m.de> + * + * Licensed under the GNU/GPL. See COPYING for details. + */ +#include <linux/of_platform.h> +#include <asm/hardware/cache-l2x0.h> + +#include <asm/mach/arch.h> +#include <asm/siginfo.h> +#include <asm/signal.h> + + +static bool first_fault = true; + +static int bcm5301x_abort_handler(unsigned long addr, unsigned int fsr, + struct pt_regs *regs) +{ + if (fsr == 0x1c06 && first_fault) { + first_fault = false; + + /* + * These faults with code 0x1c06 happens for no good reason, + * possibly left over from the CFE boot loader. + */ + pr_warn("External imprecise Data abort at addr=%#lx, fsr=%#x ignored.\n", + addr, fsr); + + /* Returning non-zero causes fault display and panic */ + return 0; + } + + /* Others should cause a fault */ + return 1; +} + +static void __init bcm5301x_init_early(void) +{ + /* Install our hook */ + hook_fault_code(16 + 6, bcm5301x_abort_handler, SIGBUS, BUS_OBJERR, + "imprecise external abort"); +} + +static void __init bcm5301x_dt_init(void) +{ + l2x0_of_init(0, ~0UL); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); +} + +static const char __initconst *bcm5301x_dt_compat[] = { + "brcm,bcm4708", + NULL, +}; + +DT_MACHINE_START(BCM5301X, "BCM5301X") + .init_early = bcm5301x_init_early, + .init_machine = bcm5301x_dt_init, + .dt_compat = bcm5301x_dt_compat, +MACHINE_END diff --git a/arch/arm/mach-bcm2835/Kconfig b/arch/arm/mach-bcm2835/Kconfig index d1f9612f8c1..3a369350a26 100644 --- a/arch/arm/mach-bcm2835/Kconfig +++ b/arch/arm/mach-bcm2835/Kconfig @@ -4,10 +4,6 @@ config ARCH_BCM2835 select ARM_AMBA select ARM_ERRATA_411920 select ARM_TIMER_SP804 - select CLKDEV_LOOKUP - select CLKSRC_OF - select CPU_V6 - select GENERIC_CLOCKEVENTS select PINCTRL select PINCTRL_BCM2835 help diff --git a/arch/arm/mach-berlin/Kconfig b/arch/arm/mach-berlin/Kconfig index 7a02d222c37..b0cb0722acd 100644 --- a/arch/arm/mach-berlin/Kconfig +++ b/arch/arm/mach-berlin/Kconfig @@ -1,9 +1,7 @@ config ARCH_BERLIN bool "Marvell Berlin SoCs" if ARCH_MULTI_V7 select ARM_GIC - select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP - select COMMON_CLK select DW_APB_ICTL select DW_APB_TIMER_OF @@ -16,12 +14,10 @@ config MACH_BERLIN_BG2 select CACHE_L2X0 select CPU_PJ4B select HAVE_ARM_TWD if SMP - select HAVE_SMP config MACH_BERLIN_BG2CD bool "Marvell Armada 1500-mini (BG2CD)" select CACHE_L2X0 - select CPU_V7 select HAVE_ARM_TWD if SMP endmenu diff --git a/arch/arm/mach-clps711x/board-autcpu12.c b/arch/arm/mach-clps711x/board-autcpu12.c index f8d71a89644..eb945b2a004 100644 --- a/arch/arm/mach-clps711x/board-autcpu12.c +++ b/arch/arm/mach-clps711x/board-autcpu12.c @@ -265,14 +265,12 @@ static void __init autcpu12_init_late(void) MACHINE_START(AUTCPU12, "autronix autcpu12") /* Maintainer: Thomas Gleixner */ .atag_offset = 0x20000, - .nr_irqs = CLPS711X_NR_IRQS, .map_io = clps711x_map_io, .init_early = clps711x_init_early, .init_irq = clps711x_init_irq, .init_time = clps711x_timer_init, .init_machine = autcpu12_init, .init_late = autcpu12_init_late, - .handle_irq = clps711x_handle_irq, .restart = clps711x_restart, MACHINE_END diff --git a/arch/arm/mach-clps711x/board-cdb89712.c b/arch/arm/mach-clps711x/board-cdb89712.c index a9e38c6bcfb..e261a47f2af 100644 --- a/arch/arm/mach-clps711x/board-cdb89712.c +++ b/arch/arm/mach-clps711x/board-cdb89712.c @@ -139,12 +139,10 @@ static void __init cdb89712_init(void) MACHINE_START(CDB89712, "Cirrus-CDB89712") /* Maintainer: Ray Lehtiniemi */ .atag_offset = 0x100, - .nr_irqs = CLPS711X_NR_IRQS, .map_io = clps711x_map_io, .init_early = clps711x_init_early, .init_irq = clps711x_init_irq, .init_time = clps711x_timer_init, .init_machine = cdb89712_init, - .handle_irq = clps711x_handle_irq, .restart = clps711x_restart, MACHINE_END diff --git a/arch/arm/mach-clps711x/board-clep7312.c b/arch/arm/mach-clps711x/board-clep7312.c index b4764246d0f..221b9de32dd 100644 --- a/arch/arm/mach-clps711x/board-clep7312.c +++ b/arch/arm/mach-clps711x/board-clep7312.c @@ -36,12 +36,10 @@ fixup_clep7312(struct tag *tags, char **cmdline, struct meminfo *mi) MACHINE_START(CLEP7212, "Cirrus Logic 7212/7312") /* Maintainer: Nobody */ .atag_offset = 0x0100, - .nr_irqs = CLPS711X_NR_IRQS, .fixup = fixup_clep7312, .map_io = clps711x_map_io, .init_early = clps711x_init_early, .init_irq = clps711x_init_irq, .init_time = clps711x_timer_init, - .handle_irq = clps711x_handle_irq, .restart = clps711x_restart, MACHINE_END diff --git a/arch/arm/mach-clps711x/board-edb7211.c b/arch/arm/mach-clps711x/board-edb7211.c index fe6184ead89..077609841f1 100644 --- a/arch/arm/mach-clps711x/board-edb7211.c +++ b/arch/arm/mach-clps711x/board-edb7211.c @@ -177,7 +177,6 @@ static void __init edb7211_init_late(void) MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)") /* Maintainer: Jon McClintock */ .atag_offset = VIDEORAM_SIZE + 0x100, - .nr_irqs = CLPS711X_NR_IRQS, .fixup = fixup_edb7211, .reserve = edb7211_reserve, .map_io = clps711x_map_io, @@ -186,6 +185,5 @@ MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)") .init_time = clps711x_timer_init, .init_machine = edb7211_init, .init_late = edb7211_init_late, - .handle_irq = clps711x_handle_irq, .restart = clps711x_restart, MACHINE_END diff --git a/arch/arm/mach-clps711x/board-p720t.c b/arch/arm/mach-clps711x/board-p720t.c index dd81b06f68f..67b733744ed 100644 --- a/arch/arm/mach-clps711x/board-p720t.c +++ b/arch/arm/mach-clps711x/board-p720t.c @@ -363,7 +363,6 @@ static void __init p720t_init_late(void) MACHINE_START(P720T, "ARM-Prospector720T") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ .atag_offset = 0x100, - .nr_irqs = CLPS711X_NR_IRQS, .fixup = fixup_p720t, .map_io = clps711x_map_io, .init_early = clps711x_init_early, @@ -371,6 +370,5 @@ MACHINE_START(P720T, "ARM-Prospector720T") .init_time = clps711x_timer_init, .init_machine = p720t_init, .init_late = p720t_init_late, - .handle_irq = clps711x_handle_irq, .restart = clps711x_restart, MACHINE_END diff --git a/arch/arm/mach-clps711x/common.c b/arch/arm/mach-clps711x/common.c index a1935911e4f..aee81fa46cc 100644 --- a/arch/arm/mach-clps711x/common.c +++ b/arch/arm/mach-clps711x/common.c @@ -31,14 +31,14 @@ #include <linux/clk-provider.h> #include <linux/sched_clock.h> -#include <asm/exception.h> -#include <asm/mach/irq.h> #include <asm/mach/map.h> #include <asm/mach/time.h> #include <asm/system_misc.h> #include <mach/hardware.h> +#include "common.h" + static struct clk *clk_pll, *clk_bus, *clk_uart, *clk_timerl, *clk_timerh, *clk_tint, *clk_spi; @@ -59,204 +59,9 @@ void __init clps711x_map_io(void) iotable_init(clps711x_io_desc, ARRAY_SIZE(clps711x_io_desc)); } -static void int1_mask(struct irq_data *d) -{ - u32 intmr1; - - intmr1 = clps_readl(INTMR1); - intmr1 &= ~(1 << d->irq); - clps_writel(intmr1, INTMR1); -} - -static void int1_eoi(struct irq_data *d) -{ - switch (d->irq) { - case IRQ_CSINT: clps_writel(0, COEOI); break; - case IRQ_TC1OI: clps_writel(0, TC1EOI); break; - case IRQ_TC2OI: clps_writel(0, TC2EOI); break; - case IRQ_RTCMI: clps_writel(0, RTCEOI); break; - case IRQ_TINT: clps_writel(0, TEOI); break; - case IRQ_UMSINT: clps_writel(0, UMSEOI); break; - } -} - -static void int1_unmask(struct irq_data *d) -{ - u32 intmr1; - - intmr1 = clps_readl(INTMR1); - intmr1 |= 1 << d->irq; - clps_writel(intmr1, INTMR1); -} - -static struct irq_chip int1_chip = { - .name = "Interrupt Vector 1", - .irq_eoi = int1_eoi, - .irq_mask = int1_mask, - .irq_unmask = int1_unmask, -}; - -static void int2_mask(struct irq_data *d) -{ - u32 intmr2; - - intmr2 = clps_readl(INTMR2); - intmr2 &= ~(1 << (d->irq - 16)); - clps_writel(intmr2, INTMR2); -} - -static void int2_eoi(struct irq_data *d) -{ - switch (d->irq) { - case IRQ_KBDINT: clps_writel(0, KBDEOI); break; - } -} - -static void int2_unmask(struct irq_data *d) -{ - u32 intmr2; - - intmr2 = clps_readl(INTMR2); - intmr2 |= 1 << (d->irq - 16); - clps_writel(intmr2, INTMR2); -} - -static struct irq_chip int2_chip = { - .name = "Interrupt Vector 2", - .irq_eoi = int2_eoi, - .irq_mask = int2_mask, - .irq_unmask = int2_unmask, -}; - -static void int3_mask(struct irq_data *d) -{ - u32 intmr3; - - intmr3 = clps_readl(INTMR3); - intmr3 &= ~(1 << (d->irq - 32)); - clps_writel(intmr3, INTMR3); -} - -static void int3_unmask(struct irq_data *d) -{ - u32 intmr3; - - intmr3 = clps_readl(INTMR3); - intmr3 |= 1 << (d->irq - 32); - clps_writel(intmr3, INTMR3); -} - -static struct irq_chip int3_chip = { - .name = "Interrupt Vector 3", - .irq_mask = int3_mask, - .irq_unmask = int3_unmask, -}; - -static struct { - int nr; - struct irq_chip *chip; - irq_flow_handler_t handle; -} clps711x_irqdescs[] __initdata = { - { IRQ_CSINT, &int1_chip, handle_fasteoi_irq, }, - { IRQ_EINT1, &int1_chip, handle_level_irq, }, - { IRQ_EINT2, &int1_chip, handle_level_irq, }, - { IRQ_EINT3, &int1_chip, handle_level_irq, }, - { IRQ_TC1OI, &int1_chip, handle_fasteoi_irq, }, - { IRQ_TC2OI, &int1_chip, handle_fasteoi_irq, }, - { IRQ_RTCMI, &int1_chip, handle_fasteoi_irq, }, - { IRQ_TINT, &int1_chip, handle_fasteoi_irq, }, - { IRQ_UTXINT1, &int1_chip, handle_level_irq, }, - { IRQ_URXINT1, &int1_chip, handle_level_irq, }, - { IRQ_UMSINT, &int1_chip, handle_fasteoi_irq, }, - { IRQ_SSEOTI, &int1_chip, handle_level_irq, }, - { IRQ_KBDINT, &int2_chip, handle_fasteoi_irq, }, - { IRQ_SS2RX, &int2_chip, handle_level_irq, }, - { IRQ_SS2TX, &int2_chip, handle_level_irq, }, - { IRQ_UTXINT2, &int2_chip, handle_level_irq, }, - { IRQ_URXINT2, &int2_chip, handle_level_irq, }, -}; - void __init clps711x_init_irq(void) { - unsigned int i; - - /* Disable interrupts */ - clps_writel(0, INTMR1); - clps_writel(0, INTMR2); - clps_writel(0, INTMR3); - - /* Clear down any pending interrupts */ - clps_writel(0, BLEOI); - clps_writel(0, MCEOI); - clps_writel(0, COEOI); - clps_writel(0, TC1EOI); - clps_writel(0, TC2EOI); - clps_writel(0, RTCEOI); - clps_writel(0, TEOI); - clps_writel(0, UMSEOI); - clps_writel(0, KBDEOI); - clps_writel(0, SRXEOF); - clps_writel(0xffffffff, DAISR); - - for (i = 0; i < ARRAY_SIZE(clps711x_irqdescs); i++) { - irq_set_chip_and_handler(clps711x_irqdescs[i].nr, - clps711x_irqdescs[i].chip, - clps711x_irqdescs[i].handle); - set_irq_flags(clps711x_irqdescs[i].nr, - IRQF_VALID | IRQF_PROBE); - } - - if (IS_ENABLED(CONFIG_FIQ)) { - init_FIQ(0); - irq_set_chip_and_handler(IRQ_DAIINT, &int3_chip, - handle_bad_irq); - set_irq_flags(IRQ_DAIINT, - IRQF_VALID | IRQF_PROBE | IRQF_NOAUTOEN); - } -} - -static inline u32 fls16(u32 x) -{ - u32 r = 15; - - if (!(x & 0xff00)) { - x <<= 8; - r -= 8; - } - if (!(x & 0xf000)) { - x <<= 4; - r -= 4; - } - if (!(x & 0xc000)) { - x <<= 2; - r -= 2; - } - if (!(x & 0x8000)) - r--; - - return r; -} - -asmlinkage void __exception_irq_entry clps711x_handle_irq(struct pt_regs *regs) -{ - do { - u32 irqstat; - void __iomem *base = CLPS711X_VIRT_BASE; - - irqstat = readw_relaxed(base + INTSR1) & - readw_relaxed(base + INTMR1); - if (irqstat) - handle_IRQ(fls16(irqstat), regs); - - irqstat = readw_relaxed(base + INTSR2) & - readw_relaxed(base + INTMR2); - if (irqstat) { - handle_IRQ(fls16(irqstat) + 16, regs); - continue; - } - - break; - } while (1); + clps711x_intc_init(CLPS711X_PHYS_BASE, SZ_16K); } static u64 notrace clps711x_sched_clock_read(void) diff --git a/arch/arm/mach-clps711x/common.h b/arch/arm/mach-clps711x/common.h index 9a6767bfdc4..7489139d5d6 100644 --- a/arch/arm/mach-clps711x/common.h +++ b/arch/arm/mach-clps711x/common.h @@ -6,13 +6,14 @@ #include <linux/reboot.h> -#define CLPS711X_NR_IRQS (33) #define CLPS711X_NR_GPIO (4 * 8 + 3) #define CLPS711X_GPIO(prt, bit) ((prt) * 8 + (bit)) extern void clps711x_map_io(void); extern void clps711x_init_irq(void); extern void clps711x_timer_init(void); -extern void clps711x_handle_irq(struct pt_regs *regs); extern void clps711x_restart(enum reboot_mode mode, const char *cmd); extern void clps711x_init_early(void); + +/* drivers/irqchip/irq-clps711x.c */ +void clps711x_intc_init(phys_addr_t, resource_size_t); diff --git a/arch/arm/mach-clps711x/include/mach/clps711x.h b/arch/arm/mach-clps711x/include/mach/clps711x.h index 0286f4bf994..eb052a11aa9 100644 --- a/arch/arm/mach-clps711x/include/mach/clps711x.h +++ b/arch/arm/mach-clps711x/include/mach/clps711x.h @@ -40,8 +40,6 @@ #define MEMCFG1 (0x0180) #define MEMCFG2 (0x01c0) #define DRFPR (0x0200) -#define INTSR1 (0x0240) -#define INTMR1 (0x0280) #define LCDCON (0x02c0) #define TC1D (0x0300) #define TC2D (0x0340) @@ -55,28 +53,16 @@ #define PALLSW (0x0540) #define PALMSW (0x0580) #define STFCLR (0x05c0) -#define BLEOI (0x0600) -#define MCEOI (0x0640) -#define TEOI (0x0680) -#define TC1EOI (0x06c0) -#define TC2EOI (0x0700) -#define RTCEOI (0x0740) -#define UMSEOI (0x0780) -#define COEOI (0x07c0) #define HALT (0x0800) #define STDBY (0x0840) #define FBADDR (0x1000) #define SYSCON2 (0x1100) #define SYSFLG2 (0x1140) -#define INTSR2 (0x1240) -#define INTMR2 (0x1280) #define UARTDR2 (0x1480) #define UBRLCR2 (0x14c0) #define SS2DR (0x1500) -#define SRXEOF (0x1600) #define SS2POP (0x16c0) -#define KBDEOI (0x1700) #define DAIR (0x2000) #define DAIDR0 (0x2040) @@ -84,8 +70,6 @@ #define DAIDR2 (0x20c0) #define DAISR (0x2100) #define SYSCON3 (0x2200) -#define INTSR3 (0x2240) -#define INTMR3 (0x2280) #define LEDFLSH (0x22c0) #define SDCONF (0x2300) #define SDRFPR (0x2340) diff --git a/arch/arm/mach-cns3xxx/Kconfig b/arch/arm/mach-cns3xxx/Kconfig index dbf0df8bb0a..dce8decd5d4 100644 --- a/arch/arm/mach-cns3xxx/Kconfig +++ b/arch/arm/mach-cns3xxx/Kconfig @@ -1,9 +1,6 @@ config ARCH_CNS3XXX bool "Cavium Networks CNS3XXX family" if ARCH_MULTI_V6 select ARM_GIC - select CPU_V6K - select GENERIC_CLOCKEVENTS - select MIGHT_HAVE_CACHE_L2X0 select MIGHT_HAVE_PCI select PCI_DOMAINS if PCI help diff --git a/arch/arm/mach-dove/Kconfig b/arch/arm/mach-dove/Kconfig index 0bc7cdf8cf4..d8c439c89ea 100644 --- a/arch/arm/mach-dove/Kconfig +++ b/arch/arm/mach-dove/Kconfig @@ -20,18 +20,6 @@ config MACH_CM_A510 Say 'Y' here if you want your kernel to support the CompuLab CM-A510 Board. -config MACH_DOVE_DT - bool "Marvell Dove Flattened Device Tree" - select DOVE_CLK - select ORION_IRQCHIP - select ORION_TIMER - select REGULATOR - select REGULATOR_FIXED_VOLTAGE - select USE_OF - help - Say 'Y' here if you want your kernel to support the - Marvell Dove using flattened device tree. - endmenu endif diff --git a/arch/arm/mach-dove/Makefile b/arch/arm/mach-dove/Makefile index cbc5c061878..b608a21919f 100644 --- a/arch/arm/mach-dove/Makefile +++ b/arch/arm/mach-dove/Makefile @@ -2,5 +2,4 @@ obj-y += common.o obj-$(CONFIG_DOVE_LEGACY) += irq.o mpp.o obj-$(CONFIG_PCI) += pcie.o obj-$(CONFIG_MACH_DOVE_DB) += dove-db-setup.o -obj-$(CONFIG_MACH_DOVE_DT) += board-dt.o obj-$(CONFIG_MACH_CM_A510) += cm-a510.o diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig index 0aded64a9eb..830b76e7025 100644 --- a/arch/arm/mach-highbank/Kconfig +++ b/arch/arm/mach-highbank/Kconfig @@ -5,7 +5,6 @@ config ARCH_HIGHBANK select ARCH_HAS_HOLES_MEMORYMODEL select ARCH_HAS_OPP select ARCH_SUPPORTS_BIG_ENDIAN - select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_AMBA select ARM_ERRATA_764369 if SMP select ARM_ERRATA_775420 @@ -14,14 +13,8 @@ config ARCH_HIGHBANK select ARM_PSCI select ARM_TIMER_SP804 select CACHE_L2X0 - select COMMON_CLK - select CPU_V7 - select GENERIC_CLOCKEVENTS select HAVE_ARM_SCU select HAVE_ARM_TWD if SMP - select HAVE_SMP select MAILBOX select PL320_MBOX - select SPARSE_IRQ - select USE_OF select ZONE_DMA if ARM_LPAE diff --git a/arch/arm/mach-hisi/Kconfig b/arch/arm/mach-hisi/Kconfig index 8f4649b301b..9d0a87b025e 100644 --- a/arch/arm/mach-hisi/Kconfig +++ b/arch/arm/mach-hisi/Kconfig @@ -3,13 +3,9 @@ config ARCH_HI3xxx select ARM_AMBA select ARM_GIC select ARM_TIMER_SP804 - select ARCH_WANT_OPTIONAL_GPIOLIB select CACHE_L2X0 - select CLKSRC_OF - select GENERIC_CLOCKEVENTS select HAVE_ARM_SCU - select HAVE_ARM_TWD - select HAVE_SMP + select HAVE_ARM_TWD if SMP select PINCTRL select PINCTRL_SINGLE help diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 33567aa5880..5740296dc42 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -1,19 +1,15 @@ config ARCH_MXC bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 + select ARCH_HAS_CPUFREQ + select ARCH_HAS_OPP select ARCH_REQUIRE_GPIOLIB select ARM_CPU_SUSPEND if PM - select ARM_PATCH_PHYS_VIRT select CLKSRC_MMIO - select COMMON_CLK - select GENERIC_ALLOCATOR - select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP - select MIGHT_HAVE_CACHE_L2X0 if ARCH_MULTI_V6_V7 - select MULTI_IRQ_HANDLER select PINCTRL + select PM_OPP if PM select SOC_BUS - select SPARSE_IRQ - select USE_OF + select SRAM help Support for Freescale MXC/iMX-based family of processors @@ -121,18 +117,16 @@ config SOC_IMX31 config SOC_IMX35 bool select ARCH_MXC_IOMUX_V3 - select CPU_V6K select HAVE_EPIT select MXC_AVIC + select PINCTRL_IMX35 select SMP_ON_UP if SMP - select PINCTRL config SOC_IMX5 bool select ARCH_HAS_CPUFREQ select ARCH_HAS_OPP select ARCH_MXC_IOMUX_V3 - select CPU_V7 select MXC_TZIC config SOC_IMX51 @@ -777,65 +771,50 @@ config SOC_IMX50 config SOC_IMX53 bool "i.MX53 support" select HAVE_IMX_SRC - select IMX_HAVE_PLATFORM_IMX2_WDT select PINCTRL_IMX53 select SOC_IMX5 help This enables support for Freescale i.MX53 processor. -config SOC_IMX6Q - bool "i.MX6 Quad/DualLite support" - select ARCH_HAS_CPUFREQ - select ARCH_HAS_OPP +config SOC_IMX6 + bool select ARM_ERRATA_754322 - select ARM_ERRATA_764369 if SMP select ARM_ERRATA_775420 select ARM_GIC - select CPU_V7 - select HAVE_ARM_SCU if SMP - select HAVE_ARM_TWD if SMP select HAVE_IMX_ANATOP select HAVE_IMX_GPC select HAVE_IMX_MMDC select HAVE_IMX_SRC - select HAVE_SMP select MFD_SYSCON - select MIGHT_HAVE_PCI - select PCI_DOMAINS if PCI - select PINCTRL_IMX6Q select PL310_ERRATA_588369 if CACHE_PL310 select PL310_ERRATA_727915 if CACHE_PL310 select PL310_ERRATA_769419 if CACHE_PL310 - select PM_OPP if PM + +config SOC_IMX6Q + bool "i.MX6 Quad/DualLite support" + select ARM_ERRATA_764369 if SMP + select HAVE_ARM_SCU if SMP + select HAVE_ARM_TWD if SMP + select MIGHT_HAVE_PCI + select PCI_DOMAINS if PCI + select PINCTRL_IMX6Q + select SOC_IMX6 help This enables support for Freescale i.MX6 Quad processor. config SOC_IMX6SL bool "i.MX6 SoloLite support" - select ARM_ERRATA_754322 - select ARM_ERRATA_775420 - select ARM_GIC - select CPU_V7 - select HAVE_IMX_ANATOP - select HAVE_IMX_GPC - select HAVE_IMX_MMDC - select HAVE_IMX_SRC - select MFD_SYSCON select PINCTRL_IMX6SL - select PL310_ERRATA_588369 if CACHE_PL310 - select PL310_ERRATA_727915 if CACHE_PL310 - select PL310_ERRATA_769419 if CACHE_PL310 + select SOC_IMX6 help This enables support for Freescale i.MX6 SoloLite processor. config SOC_VF610 bool "Vybrid Family VF610 support" - select CPU_V7 select ARM_GIC - select CLKSRC_OF select PINCTRL_VF610 select VF_PIT_TIMER select PL310_ERRATA_588369 if CACHE_PL310 diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index befcaf5d057..f4ed83032dd 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -30,6 +30,7 @@ obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o ifeq ($(CONFIG_CPU_IDLE),y) obj-$(CONFIG_SOC_IMX5) += cpuidle-imx5.o obj-$(CONFIG_SOC_IMX6Q) += cpuidle-imx6q.o +obj-$(CONFIG_SOC_IMX6SL) += cpuidle-imx6sl.o endif ifdef CONFIG_SND_IMX_SOC @@ -101,11 +102,11 @@ obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o mach-imx6q.o obj-$(CONFIG_SOC_IMX6SL) += clk-imx6sl.o mach-imx6sl.o -ifeq ($(CONFIG_PM),y) -obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o headsmp.o -# i.MX6SL reuses i.MX6Q code -obj-$(CONFIG_SOC_IMX6SL) += pm-imx6q.o headsmp.o +ifeq ($(CONFIG_SUSPEND),y) +AFLAGS_suspend-imx6.o :=-Wa,-march=armv7-a +obj-$(CONFIG_SOC_IMX6) += suspend-imx6.o endif +obj-$(CONFIG_SOC_IMX6) += pm-imx6.o # i.MX5 based machines obj-$(CONFIG_MACH_MX51_BABBAGE) += mach-mx51_babbage.o diff --git a/arch/arm/mach-imx/clk-imx21.c b/arch/arm/mach-imx/clk-imx21.c index d7ed66091a2..bdc2e4630a0 100644 --- a/arch/arm/mach-imx/clk-imx21.c +++ b/arch/arm/mach-imx/clk-imx21.c @@ -149,7 +149,6 @@ int __init mx21_clocks_init(unsigned long lref, unsigned long href) clk_register_clkdev(clk[per1], "per", "imx-gpt.1"); clk_register_clkdev(clk[gpt3_ipg_gate], "ipg", "imx-gpt.2"); clk_register_clkdev(clk[per1], "per", "imx-gpt.2"); - clk_register_clkdev(clk[pwm_ipg_gate], "pwm", "mxc_pwm.0"); clk_register_clkdev(clk[per2], "per", "imx21-cspi.0"); clk_register_clkdev(clk[cspi1_ipg_gate], "ipg", "imx21-cspi.0"); clk_register_clkdev(clk[per2], "per", "imx21-cspi.1"); diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c index 69858c78f40..dc36e6c2f1d 100644 --- a/arch/arm/mach-imx/clk-imx25.c +++ b/arch/arm/mach-imx/clk-imx25.c @@ -265,14 +265,6 @@ int __init mx25_clocks_init(void) clk_register_clkdev(clk[cspi1_ipg], NULL, "imx35-cspi.0"); clk_register_clkdev(clk[cspi2_ipg], NULL, "imx35-cspi.1"); clk_register_clkdev(clk[cspi3_ipg], NULL, "imx35-cspi.2"); - clk_register_clkdev(clk[pwm1_ipg], "ipg", "mxc_pwm.0"); - clk_register_clkdev(clk[per10], "per", "mxc_pwm.0"); - clk_register_clkdev(clk[pwm1_ipg], "ipg", "mxc_pwm.1"); - clk_register_clkdev(clk[per10], "per", "mxc_pwm.1"); - clk_register_clkdev(clk[pwm1_ipg], "ipg", "mxc_pwm.2"); - clk_register_clkdev(clk[per10], "per", "mxc_pwm.2"); - clk_register_clkdev(clk[pwm1_ipg], "ipg", "mxc_pwm.3"); - clk_register_clkdev(clk[per10], "per", "mxc_pwm.3"); clk_register_clkdev(clk[kpp_ipg], NULL, "imx-keypad"); clk_register_clkdev(clk[tsc_ipg], NULL, "mx25-adc"); clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx21-i2c.0"); diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c index c6b40f38678..d2da8908b26 100644 --- a/arch/arm/mach-imx/clk-imx27.c +++ b/arch/arm/mach-imx/clk-imx27.c @@ -231,7 +231,6 @@ int __init mx27_clocks_init(unsigned long fref) clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.4"); clk_register_clkdev(clk[gpt6_ipg_gate], "ipg", "imx-gpt.5"); clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.5"); - clk_register_clkdev(clk[pwm_ipg_gate], NULL, "mxc_pwm.0"); clk_register_clkdev(clk[per2_gate], "per", "imx21-mmc.0"); clk_register_clkdev(clk[sdhc1_ipg_gate], "ipg", "imx21-mmc.0"); clk_register_clkdev(clk[per2_gate], "per", "imx21-mmc.1"); diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c index 19fca1fdc6f..568ef0a4de8 100644 --- a/arch/arm/mach-imx/clk-imx51-imx53.c +++ b/arch/arm/mach-imx/clk-imx51-imx53.c @@ -266,8 +266,6 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil, clk_register_clkdev(clk[IMX5_CLK_ECSPI2_PER_GATE], "per", "imx51-ecspi.1"); clk_register_clkdev(clk[IMX5_CLK_ECSPI2_IPG_GATE], "ipg", "imx51-ecspi.1"); clk_register_clkdev(clk[IMX5_CLK_CSPI_IPG_GATE], NULL, "imx35-cspi.2"); - clk_register_clkdev(clk[IMX5_CLK_PWM1_IPG_GATE], "pwm", "mxc_pwm.0"); - clk_register_clkdev(clk[IMX5_CLK_PWM2_IPG_GATE], "pwm", "mxc_pwm.1"); clk_register_clkdev(clk[IMX5_CLK_I2C1_GATE], NULL, "imx21-i2c.0"); clk_register_clkdev(clk[IMX5_CLK_I2C2_GATE], NULL, "imx21-i2c.1"); clk_register_clkdev(clk[IMX5_CLK_USBOH3_PER_GATE], "per", "mxc-ehci.0"); diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index af2e582d2b7..b0e7f9d2c24 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -437,12 +437,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) clk_register_clkdev(clk[gpt_ipg], "ipg", "imx-gpt.0"); clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0"); - clk_register_clkdev(clk[cko1_sel], "cko1_sel", NULL); - clk_register_clkdev(clk[ahb], "ahb", NULL); - clk_register_clkdev(clk[cko1], "cko1", NULL); - clk_register_clkdev(clk[arm], NULL, "cpu0"); - clk_register_clkdev(clk[pll4_post_div], "pll4_post_div", NULL); - clk_register_clkdev(clk[pll4_audio], "pll4_audio", NULL); + clk_register_clkdev(clk[enet_ref], "enet_ref", NULL); if ((imx_get_soc_revision() != IMX_CHIP_REVISION_1_0) || cpu_is_imx6dl()) { @@ -482,6 +477,9 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) if (IS_ENABLED(CONFIG_PCI_IMX6)) clk_set_parent(clk[lvds1_sel], clk[sata_ref]); + /* Set initial power mode */ + imx6q_set_lpm(WAIT_CLOCKED); + np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt"); base = of_iomap(np, 0); WARN_ON(!base); diff --git a/arch/arm/mach-imx/clk-imx6sl.c b/arch/arm/mach-imx/clk-imx6sl.c index 3781a185399..f7073c0782f 100644 --- a/arch/arm/mach-imx/clk-imx6sl.c +++ b/arch/arm/mach-imx/clk-imx6sl.c @@ -1,5 +1,5 @@ /* - * Copyright 2013 Freescale Semiconductor, Inc. + * Copyright 2013-2014 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -18,27 +18,43 @@ #include "clk.h" #include "common.h" -static const char const *step_sels[] = { "osc", "pll2_pfd2", }; -static const char const *pll1_sw_sels[] = { "pll1_sys", "step", }; -static const char const *ocram_alt_sels[] = { "pll2_pfd2", "pll3_pfd1", }; -static const char const *ocram_sels[] = { "periph", "ocram_alt_sels", }; -static const char const *pre_periph_sels[] = { "pll2_bus", "pll2_pfd2", "pll2_pfd0", "pll2_198m", }; -static const char const *periph_clk2_sels[] = { "pll3_usb_otg", "osc", "osc", "dummy", }; -static const char const *periph2_clk2_sels[] = { "pll3_usb_otg", "pll2_bus", }; -static const char const *periph_sels[] = { "pre_periph_sel", "periph_clk2_podf", }; -static const char const *periph2_sels[] = { "pre_periph2_sel", "periph2_clk2_podf", }; -static const char const *csi_lcdif_sels[] = { "mmdc", "pll2_pfd2", "pll3_120m", "pll3_pfd1", }; -static const char const *usdhc_sels[] = { "pll2_pfd2", "pll2_pfd0", }; -static const char const *ssi_sels[] = { "pll3_pfd2", "pll3_pfd3", "pll4_audio_div", "dummy", }; -static const char const *perclk_sels[] = { "ipg", "osc", }; -static const char const *epdc_pxp_sels[] = { "mmdc", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll2_pfd2", "pll3_pfd1", }; -static const char const *gpu2d_ovg_sels[] = { "pll3_pfd1", "pll3_usb_otg", "pll2_bus", "pll2_pfd2", }; -static const char const *gpu2d_sels[] = { "pll2_pfd2", "pll3_usb_otg", "pll3_pfd1", "pll2_bus", }; -static const char const *lcdif_pix_sels[] = { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll3_pfd0", "pll3_pfd1", }; -static const char const *epdc_pix_sels[] = { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll2_pfd1", "pll3_pfd1", }; -static const char const *audio_sels[] = { "pll4_audio_div", "pll3_pfd2", "pll3_pfd3", "pll3_usb_otg", }; -static const char const *ecspi_sels[] = { "pll3_60m", "osc", }; -static const char const *uart_sels[] = { "pll3_80m", "osc", }; +#define CCSR 0xc +#define BM_CCSR_PLL1_SW_CLK_SEL (1 << 2) +#define CACRR 0x10 +#define CDHIPR 0x48 +#define BM_CDHIPR_ARM_PODF_BUSY (1 << 16) +#define ARM_WAIT_DIV_396M 2 +#define ARM_WAIT_DIV_792M 4 +#define ARM_WAIT_DIV_996M 6 + +#define PLL_ARM 0x0 +#define BM_PLL_ARM_DIV_SELECT (0x7f << 0) +#define BM_PLL_ARM_POWERDOWN (1 << 12) +#define BM_PLL_ARM_ENABLE (1 << 13) +#define BM_PLL_ARM_LOCK (1 << 31) +#define PLL_ARM_DIV_792M 66 + +static const char *step_sels[] = { "osc", "pll2_pfd2", }; +static const char *pll1_sw_sels[] = { "pll1_sys", "step", }; +static const char *ocram_alt_sels[] = { "pll2_pfd2", "pll3_pfd1", }; +static const char *ocram_sels[] = { "periph", "ocram_alt_sels", }; +static const char *pre_periph_sels[] = { "pll2_bus", "pll2_pfd2", "pll2_pfd0", "pll2_198m", }; +static const char *periph_clk2_sels[] = { "pll3_usb_otg", "osc", "osc", "dummy", }; +static const char *periph2_clk2_sels[] = { "pll3_usb_otg", "pll2_bus", }; +static const char *periph_sels[] = { "pre_periph_sel", "periph_clk2_podf", }; +static const char *periph2_sels[] = { "pre_periph2_sel", "periph2_clk2_podf", }; +static const char *csi_lcdif_sels[] = { "mmdc", "pll2_pfd2", "pll3_120m", "pll3_pfd1", }; +static const char *usdhc_sels[] = { "pll2_pfd2", "pll2_pfd0", }; +static const char *ssi_sels[] = { "pll3_pfd2", "pll3_pfd3", "pll4_audio_div", "dummy", }; +static const char *perclk_sels[] = { "ipg", "osc", }; +static const char *epdc_pxp_sels[] = { "mmdc", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll2_pfd2", "pll3_pfd1", }; +static const char *gpu2d_ovg_sels[] = { "pll3_pfd1", "pll3_usb_otg", "pll2_bus", "pll2_pfd2", }; +static const char *gpu2d_sels[] = { "pll2_pfd2", "pll3_usb_otg", "pll3_pfd1", "pll2_bus", }; +static const char *lcdif_pix_sels[] = { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll3_pfd0", "pll3_pfd1", }; +static const char *epdc_pix_sels[] = { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll2_pfd1", "pll3_pfd1", }; +static const char *audio_sels[] = { "pll4_audio_div", "pll3_pfd2", "pll3_pfd3", "pll3_usb_otg", }; +static const char *ecspi_sels[] = { "pll3_60m", "osc", }; +static const char *uart_sels[] = { "pll3_80m", "osc", }; static struct clk_div_table clk_enet_ref_table[] = { { .val = 0, .div = 20, }, @@ -65,6 +81,89 @@ static struct clk_div_table video_div_table[] = { static struct clk *clks[IMX6SL_CLK_END]; static struct clk_onecell_data clk_data; +static void __iomem *ccm_base; +static void __iomem *anatop_base; + +static const u32 clks_init_on[] __initconst = { + IMX6SL_CLK_IPG, IMX6SL_CLK_ARM, IMX6SL_CLK_MMDC_ROOT, +}; + +/* + * ERR005311 CCM: After exit from WAIT mode, unwanted interrupt(s) taken + * during WAIT mode entry process could cause cache memory + * corruption. + * + * Software workaround: + * To prevent this issue from occurring, software should ensure that the + * ARM to IPG clock ratio is less than 12:5 (that is < 2.4x), before + * entering WAIT mode. + * + * This function will set the ARM clk to max value within the 12:5 limit. + * As IPG clock is fixed at 66MHz(so ARM freq must not exceed 158.4MHz), + * ARM freq are one of below setpoints: 396MHz, 792MHz and 996MHz, since + * the clk APIs can NOT be called in idle thread(may cause kernel schedule + * as there is sleep function in PLL wait function), so here we just slow + * down ARM to below freq according to previous freq: + * + * run mode wait mode + * 396MHz -> 132MHz; + * 792MHz -> 158.4MHz; + * 996MHz -> 142.3MHz; + */ +static int imx6sl_get_arm_divider_for_wait(void) +{ + if (readl_relaxed(ccm_base + CCSR) & BM_CCSR_PLL1_SW_CLK_SEL) { + return ARM_WAIT_DIV_396M; + } else { + if ((readl_relaxed(anatop_base + PLL_ARM) & + BM_PLL_ARM_DIV_SELECT) == PLL_ARM_DIV_792M) + return ARM_WAIT_DIV_792M; + else + return ARM_WAIT_DIV_996M; + } +} + +static void imx6sl_enable_pll_arm(bool enable) +{ + static u32 saved_pll_arm; + u32 val; + + if (enable) { + saved_pll_arm = val = readl_relaxed(anatop_base + PLL_ARM); + val |= BM_PLL_ARM_ENABLE; + val &= ~BM_PLL_ARM_POWERDOWN; + writel_relaxed(val, anatop_base + PLL_ARM); + while (!(__raw_readl(anatop_base + PLL_ARM) & BM_PLL_ARM_LOCK)) + ; + } else { + writel_relaxed(saved_pll_arm, anatop_base + PLL_ARM); + } +} + +void imx6sl_set_wait_clk(bool enter) +{ + static unsigned long saved_arm_div; + int arm_div_for_wait = imx6sl_get_arm_divider_for_wait(); + + /* + * According to hardware design, arm podf change need + * PLL1 clock enabled. + */ + if (arm_div_for_wait == ARM_WAIT_DIV_396M) + imx6sl_enable_pll_arm(true); + + if (enter) { + saved_arm_div = readl_relaxed(ccm_base + CACRR); + writel_relaxed(arm_div_for_wait, ccm_base + CACRR); + } else { + writel_relaxed(saved_arm_div, ccm_base + CACRR); + } + while (__raw_readl(ccm_base + CDHIPR) & BM_CDHIPR_ARM_PODF_BUSY) + ; + + if (arm_div_for_wait == ARM_WAIT_DIV_396M) + imx6sl_enable_pll_arm(false); +} static void __init imx6sl_clocks_init(struct device_node *ccm_node) { @@ -72,6 +171,7 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node) void __iomem *base; int irq; int i; + int ret; clks[IMX6SL_CLK_DUMMY] = imx_clk_fixed("dummy", 0); clks[IMX6SL_CLK_CKIL] = imx_obtain_fixed_clock("ckil", 0); @@ -80,6 +180,7 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node) np = of_find_compatible_node(NULL, NULL, "fsl,imx6sl-anatop"); base = of_iomap(np, 0); WARN_ON(!base); + anatop_base = base; /* type name parent base div_mask */ clks[IMX6SL_CLK_PLL1_SYS] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1_sys", "osc", base, 0x7f); @@ -127,6 +228,7 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node) np = ccm_node; base = of_iomap(np, 0); WARN_ON(!base); + ccm_base = base; /* Reuse imx6q pm code */ imx6q_pm_set_ccm_base(base); @@ -258,6 +360,19 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node) clk_register_clkdev(clks[IMX6SL_CLK_GPT], "ipg", "imx-gpt.0"); clk_register_clkdev(clks[IMX6SL_CLK_GPT_SERIAL], "per", "imx-gpt.0"); + /* Ensure the AHB clk is at 132MHz. */ + ret = clk_set_rate(clks[IMX6SL_CLK_AHB], 132000000); + if (ret) + pr_warn("%s: failed to set AHB clock rate %d!\n", + __func__, ret); + + /* + * Make sure those always on clocks are enabled to maintain the correct + * usecount and enabling/disabling of parent PLLs. + */ + for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) + clk_prepare_enable(clks[clks_init_on[i]]); + if (IS_ENABLED(CONFIG_USB_MXS_PHY)) { clk_prepare_enable(clks[IMX6SL_CLK_USBPHY1_GATE]); clk_prepare_enable(clks[IMX6SL_CLK_USBPHY2_GATE]); @@ -266,6 +381,9 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node) /* Audio-related clocks configuration */ clk_set_parent(clks[IMX6SL_CLK_SPDIF0_SEL], clks[IMX6SL_CLK_PLL3_PFD3]); + /* Set initial power mode */ + imx6q_set_lpm(WAIT_CLOCKED); + np = of_find_compatible_node(NULL, NULL, "fsl,imx6sl-gpt"); base = of_iomap(np, 0); WARN_ON(!base); diff --git a/arch/arm/mach-imx/clk-vf610.c b/arch/arm/mach-imx/clk-vf610.c index ecd66d8e20b..22dc3ee21fd 100644 --- a/arch/arm/mach-imx/clk-vf610.c +++ b/arch/arm/mach-imx/clk-vf610.c @@ -63,25 +63,25 @@ static void __iomem *anatop_base; static void __iomem *ccm_base; /* sources for multiplexer clocks, this is used multiple times */ -static const char const *fast_sels[] = { "firc", "fxosc", }; -static const char const *slow_sels[] = { "sirc_32k", "sxosc", }; -static const char const *pll1_sels[] = { "pll1_main", "pll1_pfd1", "pll1_pfd2", "pll1_pfd3", "pll1_pfd4", }; -static const char const *pll2_sels[] = { "pll2_main", "pll2_pfd1", "pll2_pfd2", "pll2_pfd3", "pll2_pfd4", }; -static const char const *sys_sels[] = { "fast_clk_sel", "slow_clk_sel", "pll2_pfd_sel", "pll2_main", "pll1_pfd_sel", "pll3_main", }; -static const char const *ddr_sels[] = { "pll2_pfd2", "sys_sel", }; -static const char const *rmii_sels[] = { "enet_ext", "audio_ext", "enet_50m", "enet_25m", }; -static const char const *enet_ts_sels[] = { "enet_ext", "fxosc", "audio_ext", "usb", "enet_ts", "enet_25m", "enet_50m", }; -static const char const *esai_sels[] = { "audio_ext", "mlb", "spdif_rx", "pll4_main_div", }; -static const char const *sai_sels[] = { "audio_ext", "mlb", "spdif_rx", "pll4_main_div", }; -static const char const *nfc_sels[] = { "platform_bus", "pll1_pfd1", "pll3_pfd1", "pll3_pfd3", }; -static const char const *qspi_sels[] = { "pll3_main", "pll3_pfd4", "pll2_pfd4", "pll1_pfd4", }; -static const char const *esdhc_sels[] = { "pll3_main", "pll3_pfd3", "pll1_pfd3", "platform_bus", }; -static const char const *dcu_sels[] = { "pll1_pfd2", "pll3_main", }; -static const char const *gpu_sels[] = { "pll2_pfd2", "pll3_pfd2", }; -static const char const *vadc_sels[] = { "pll6_main_div", "pll3_main_div", "pll3_main", }; +static const char *fast_sels[] = { "firc", "fxosc", }; +static const char *slow_sels[] = { "sirc_32k", "sxosc", }; +static const char *pll1_sels[] = { "pll1_main", "pll1_pfd1", "pll1_pfd2", "pll1_pfd3", "pll1_pfd4", }; +static const char *pll2_sels[] = { "pll2_main", "pll2_pfd1", "pll2_pfd2", "pll2_pfd3", "pll2_pfd4", }; +static const char *sys_sels[] = { "fast_clk_sel", "slow_clk_sel", "pll2_pfd_sel", "pll2_main", "pll1_pfd_sel", "pll3_main", }; +static const char *ddr_sels[] = { "pll2_pfd2", "sys_sel", }; +static const char *rmii_sels[] = { "enet_ext", "audio_ext", "enet_50m", "enet_25m", }; +static const char *enet_ts_sels[] = { "enet_ext", "fxosc", "audio_ext", "usb", "enet_ts", "enet_25m", "enet_50m", }; +static const char *esai_sels[] = { "audio_ext", "mlb", "spdif_rx", "pll4_main_div", }; +static const char *sai_sels[] = { "audio_ext", "mlb", "spdif_rx", "pll4_main_div", }; +static const char *nfc_sels[] = { "platform_bus", "pll1_pfd1", "pll3_pfd1", "pll3_pfd3", }; +static const char *qspi_sels[] = { "pll3_main", "pll3_pfd4", "pll2_pfd4", "pll1_pfd4", }; +static const char *esdhc_sels[] = { "pll3_main", "pll3_pfd3", "pll1_pfd3", "platform_bus", }; +static const char *dcu_sels[] = { "pll1_pfd2", "pll3_main", }; +static const char *gpu_sels[] = { "pll2_pfd2", "pll3_pfd2", }; +static const char *vadc_sels[] = { "pll6_main_div", "pll3_main_div", "pll3_main", }; /* FTM counter clock source, not module clock */ -static const char const *ftm_ext_sels[] = {"sirc_128k", "sxosc", "fxosc_half", "audio_ext", }; -static const char const *ftm_fix_sels[] = { "sxosc", "ipg_bus", }; +static const char *ftm_ext_sels[] = {"sirc_128k", "sxosc", "fxosc_half", "audio_ext", }; +static const char *ftm_fix_sels[] = { "sxosc", "ipg_bus", }; static struct clk_div_table pll4_main_div_table[] = { { .val = 0, .div = 1 }, diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index 59c3b9b26bb..b5241ea7670 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -1,5 +1,5 @@ /* - * Copyright 2004-2013 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2004-2014 Freescale Semiconductor, Inc. All Rights Reserved. */ /* @@ -116,7 +116,6 @@ void imx_enable_cpu(int cpu, bool enable); void imx_set_cpu_jump(int cpu, void *jump_addr); u32 imx_get_cpu_arg(int cpu); void imx_set_cpu_arg(int cpu, u32 arg); -void v7_cpu_resume(void); #ifdef CONFIG_SMP void v7_secondary_startup(void); void imx_scu_map_io(void); @@ -139,18 +138,28 @@ void imx_anatop_init(void); void imx_anatop_pre_suspend(void); void imx_anatop_post_resume(void); int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode); -void imx6q_set_chicken_bit(void); +void imx6q_set_int_mem_clk_lpm(void); +void imx6sl_set_wait_clk(bool enter); void imx_cpu_die(unsigned int cpu); int imx_cpu_kill(unsigned int cpu); -#ifdef CONFIG_PM +#ifdef CONFIG_SUSPEND +void v7_cpu_resume(void); +void imx6_suspend(void __iomem *ocram_vbase); +#else +static inline void v7_cpu_resume(void) {} +static inline void imx6_suspend(void __iomem *ocram_vbase) {} +#endif + void imx6q_pm_init(void); +void imx6dl_pm_init(void); +void imx6sl_pm_init(void); void imx6q_pm_set_ccm_base(void __iomem *base); + +#ifdef CONFIG_PM void imx5_pm_init(void); #else -static inline void imx6q_pm_init(void) {} -static inline void imx6q_pm_set_ccm_base(void __iomem *base) {} static inline void imx5_pm_init(void) {} #endif diff --git a/arch/arm/mach-imx/cpuidle-imx6q.c b/arch/arm/mach-imx/cpuidle-imx6q.c index 23ddfb693b2..6bcae047904 100644 --- a/arch/arm/mach-imx/cpuidle-imx6q.c +++ b/arch/arm/mach-imx/cpuidle-imx6q.c @@ -68,8 +68,8 @@ int __init imx6q_cpuidle_init(void) /* Need to enable SCU standby for entering WAIT modes */ imx_scu_standby_enable(); - /* Set chicken bit to get a reliable WAIT mode support */ - imx6q_set_chicken_bit(); + /* Set INT_MEM_CLK_LPM bit to get a reliable WAIT mode support */ + imx6q_set_int_mem_clk_lpm(); return cpuidle_register(&imx6q_cpuidle_driver, NULL); } diff --git a/arch/arm/mach-imx/cpuidle-imx6sl.c b/arch/arm/mach-imx/cpuidle-imx6sl.c new file mode 100644 index 00000000000..d4b6b8171fa --- /dev/null +++ b/arch/arm/mach-imx/cpuidle-imx6sl.c @@ -0,0 +1,57 @@ +/* + * Copyright (C) 2014 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/cpuidle.h> +#include <linux/module.h> +#include <asm/cpuidle.h> +#include <asm/proc-fns.h> + +#include "common.h" +#include "cpuidle.h" + +static int imx6sl_enter_wait(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index) +{ + imx6q_set_lpm(WAIT_UNCLOCKED); + /* + * Software workaround for ERR005311, see function + * description for details. + */ + imx6sl_set_wait_clk(true); + cpu_do_idle(); + imx6sl_set_wait_clk(false); + imx6q_set_lpm(WAIT_CLOCKED); + + return index; +} + +static struct cpuidle_driver imx6sl_cpuidle_driver = { + .name = "imx6sl_cpuidle", + .owner = THIS_MODULE, + .states = { + /* WFI */ + ARM_CPUIDLE_WFI_STATE, + /* WAIT */ + { + .exit_latency = 50, + .target_residency = 75, + .flags = CPUIDLE_FLAG_TIME_VALID | + CPUIDLE_FLAG_TIMER_STOP, + .enter = imx6sl_enter_wait, + .name = "WAIT", + .desc = "Clock off", + }, + }, + .state_count = 2, + .safe_state_index = 0, +}; + +int __init imx6sl_cpuidle_init(void) +{ + return cpuidle_register(&imx6sl_cpuidle_driver, NULL); +} diff --git a/arch/arm/mach-imx/cpuidle.h b/arch/arm/mach-imx/cpuidle.h index 786f98ecc14..24e33670417 100644 --- a/arch/arm/mach-imx/cpuidle.h +++ b/arch/arm/mach-imx/cpuidle.h @@ -13,6 +13,7 @@ #ifdef CONFIG_CPU_IDLE extern int imx5_cpuidle_init(void); extern int imx6q_cpuidle_init(void); +extern int imx6sl_cpuidle_init(void); #else static inline int imx5_cpuidle_init(void) { @@ -22,4 +23,8 @@ static inline int imx6q_cpuidle_init(void) { return 0; } +static inline int imx6sl_cpuidle_init(void) +{ + return 0; +} #endif diff --git a/arch/arm/mach-imx/devices-imx25.h b/arch/arm/mach-imx/devices-imx25.h index 769563fdeaa..61a114cddc3 100644 --- a/arch/arm/mach-imx/devices-imx25.h +++ b/arch/arm/mach-imx/devices-imx25.h @@ -83,7 +83,3 @@ extern const struct imx_spi_imx_data imx25_cspi_data[]; #define imx25_add_spi_imx0(pdata) imx25_add_spi_imx(0, pdata) #define imx25_add_spi_imx1(pdata) imx25_add_spi_imx(1, pdata) #define imx25_add_spi_imx2(pdata) imx25_add_spi_imx(2, pdata) - -extern struct imx_mxc_pwm_data imx25_mxc_pwm_data[]; -#define imx25_add_mxc_pwm(id) \ - imx_add_mxc_pwm(&imx25_mxc_pwm_data[id]) diff --git a/arch/arm/mach-imx/devices-imx51.h b/arch/arm/mach-imx/devices-imx51.h index deee5baee88..26389f35a2b 100644 --- a/arch/arm/mach-imx/devices-imx51.h +++ b/arch/arm/mach-imx/devices-imx51.h @@ -57,10 +57,6 @@ extern const struct imx_imx2_wdt_data imx51_imx2_wdt_data[]; #define imx51_add_imx2_wdt(id) \ imx_add_imx2_wdt(&imx51_imx2_wdt_data[id]) -extern const struct imx_mxc_pwm_data imx51_mxc_pwm_data[]; -#define imx51_add_mxc_pwm(id) \ - imx_add_mxc_pwm(&imx51_mxc_pwm_data[id]) - extern const struct imx_imx_keypad_data imx51_imx_keypad_data; #define imx51_add_imx_keypad(pdata) \ imx_add_imx_keypad(&imx51_imx_keypad_data, pdata) diff --git a/arch/arm/mach-imx/devices/Kconfig b/arch/arm/mach-imx/devices/Kconfig index 68c74fb0373..2d260a5a307 100644 --- a/arch/arm/mach-imx/devices/Kconfig +++ b/arch/arm/mach-imx/devices/Kconfig @@ -67,9 +67,6 @@ config IMX_HAVE_PLATFORM_MXC_MMC config IMX_HAVE_PLATFORM_MXC_NAND bool -config IMX_HAVE_PLATFORM_MXC_PWM - bool - config IMX_HAVE_PLATFORM_MXC_RNGA bool select ARCH_HAS_RNGA diff --git a/arch/arm/mach-imx/devices/Makefile b/arch/arm/mach-imx/devices/Makefile index 67416fb1dc6..1cbc14cd80d 100644 --- a/arch/arm/mach-imx/devices/Makefile +++ b/arch/arm/mach-imx/devices/Makefile @@ -23,7 +23,6 @@ obj-$(CONFIG_IMX_HAVE_PLATFORM_MX2_CAMERA) += platform-mx2-camera.o obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_EHCI) += platform-mxc-ehci.o obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_MMC) += platform-mxc-mmc.o obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_NAND) += platform-mxc_nand.o -obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_PWM) += platform-mxc_pwm.o obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_RNGA) += platform-mxc_rnga.o obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_RTC) += platform-mxc_rtc.o obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_W1) += platform-mxc_w1.o diff --git a/arch/arm/mach-imx/devices/devices-common.h b/arch/arm/mach-imx/devices/devices-common.h index c13b76b9f6b..61352a80bb5 100644 --- a/arch/arm/mach-imx/devices/devices-common.h +++ b/arch/arm/mach-imx/devices/devices-common.h @@ -290,15 +290,6 @@ struct imx_pata_imx_data { struct platform_device *__init imx_add_pata_imx( const struct imx_pata_imx_data *data); -struct imx_mxc_pwm_data { - int id; - resource_size_t iobase; - resource_size_t iosize; - resource_size_t irq; -}; -struct platform_device *__init imx_add_mxc_pwm( - const struct imx_mxc_pwm_data *data); - /* mxc_rtc */ struct imx_mxc_rtc_data { const char *devid; diff --git a/arch/arm/mach-imx/devices/platform-mxc_pwm.c b/arch/arm/mach-imx/devices/platform-mxc_pwm.c deleted file mode 100644 index dcd28977768..00000000000 --- a/arch/arm/mach-imx/devices/platform-mxc_pwm.c +++ /dev/null @@ -1,69 +0,0 @@ -/* - * Copyright (C) 2009-2010 Pengutronix - * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. - */ -#include "../hardware.h" -#include "devices-common.h" - -#define imx_mxc_pwm_data_entry_single(soc, _id, _hwid, _size) \ - { \ - .id = _id, \ - .iobase = soc ## _PWM ## _hwid ## _BASE_ADDR, \ - .iosize = _size, \ - .irq = soc ## _INT_PWM ## _hwid, \ - } -#define imx_mxc_pwm_data_entry(soc, _id, _hwid, _size) \ - [_id] = imx_mxc_pwm_data_entry_single(soc, _id, _hwid, _size) - -#ifdef CONFIG_SOC_IMX21 -const struct imx_mxc_pwm_data imx21_mxc_pwm_data __initconst = - imx_mxc_pwm_data_entry_single(MX21, 0, , SZ_4K); -#endif /* ifdef CONFIG_SOC_IMX21 */ - -#ifdef CONFIG_SOC_IMX25 -const struct imx_mxc_pwm_data imx25_mxc_pwm_data[] __initconst = { -#define imx25_mxc_pwm_data_entry(_id, _hwid) \ - imx_mxc_pwm_data_entry(MX25, _id, _hwid, SZ_16K) - imx25_mxc_pwm_data_entry(0, 1), - imx25_mxc_pwm_data_entry(1, 2), - imx25_mxc_pwm_data_entry(2, 3), - imx25_mxc_pwm_data_entry(3, 4), -}; -#endif /* ifdef CONFIG_SOC_IMX25 */ - -#ifdef CONFIG_SOC_IMX27 -const struct imx_mxc_pwm_data imx27_mxc_pwm_data __initconst = - imx_mxc_pwm_data_entry_single(MX27, 0, , SZ_4K); -#endif /* ifdef CONFIG_SOC_IMX27 */ - -#ifdef CONFIG_SOC_IMX51 -const struct imx_mxc_pwm_data imx51_mxc_pwm_data[] __initconst = { -#define imx51_mxc_pwm_data_entry(_id, _hwid) \ - imx_mxc_pwm_data_entry(MX51, _id, _hwid, SZ_16K) - imx51_mxc_pwm_data_entry(0, 1), - imx51_mxc_pwm_data_entry(1, 2), -}; -#endif /* ifdef CONFIG_SOC_IMX51 */ - -struct platform_device *__init imx_add_mxc_pwm( - const struct imx_mxc_pwm_data *data) -{ - struct resource res[] = { - { - .start = data->iobase, - .end = data->iobase + data->iosize - 1, - .flags = IORESOURCE_MEM, - }, { - .start = data->irq, - .end = data->irq, - .flags = IORESOURCE_IRQ, - }, - }; - - return imx_add_platform_device("mxc_pwm", data->id, - res, ARRAY_SIZE(res), NULL, 0); -} diff --git a/arch/arm/mach-imx/hardware.h b/arch/arm/mach-imx/hardware.h index a3b0b04b45c..abf43bb47ec 100644 --- a/arch/arm/mach-imx/hardware.h +++ b/arch/arm/mach-imx/hardware.h @@ -1,5 +1,5 @@ /* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2004-2007, 2014 Freescale Semiconductor, Inc. All Rights Reserved. * Copyright 2008 Juergen Beisert, kernel@pengutronix.de * * This program is free software; you can redistribute it and/or @@ -20,7 +20,9 @@ #ifndef __ASM_ARCH_MXC_HARDWARE_H__ #define __ASM_ARCH_MXC_HARDWARE_H__ +#ifndef __ASSEMBLY__ #include <asm/io.h> +#endif #include <asm/sizes.h> #define addr_in_module(addr, mod) \ diff --git a/arch/arm/mach-imx/headsmp.S b/arch/arm/mach-imx/headsmp.S index 627f16f0e9d..de5047c8a6c 100644 --- a/arch/arm/mach-imx/headsmp.S +++ b/arch/arm/mach-imx/headsmp.S @@ -12,12 +12,7 @@ #include <linux/linkage.h> #include <linux/init.h> -#include <asm/asm-offsets.h> -#include <asm/hardware/cache-l2x0.h> - .section ".text.head", "ax" - -#ifdef CONFIG_SMP diag_reg_offset: .word g_diag_reg - . @@ -34,38 +29,3 @@ ENTRY(v7_secondary_startup) set_diag_reg b secondary_startup ENDPROC(v7_secondary_startup) -#endif - -#ifdef CONFIG_ARM_CPU_SUSPEND -/* - * The following code must assume it is running from physical address - * where absolute virtual addresses to the data section have to be - * turned into relative ones. - */ - -#ifdef CONFIG_CACHE_L2X0 - .macro pl310_resume - adr r0, l2x0_saved_regs_offset - ldr r2, [r0] - add r2, r2, r0 - ldr r0, [r2, #L2X0_R_PHY_BASE] @ get physical base of l2x0 - ldr r1, [r2, #L2X0_R_AUX_CTRL] @ get aux_ctrl value - str r1, [r0, #L2X0_AUX_CTRL] @ restore aux_ctrl - mov r1, #0x1 - str r1, [r0, #L2X0_CTRL] @ re-enable L2 - .endm - -l2x0_saved_regs_offset: - .word l2x0_saved_regs - . - -#else - .macro pl310_resume - .endm -#endif - -ENTRY(v7_cpu_resume) - bl v7_invalidate_l1 - pl310_resume - b cpu_resume -ENDPROC(v7_cpu_resume) -#endif diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 76e5db4fce3..e60456d85c9 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -182,16 +182,83 @@ static void __init imx6q_enet_phy_init(void) static void __init imx6q_1588_init(void) { + struct device_node *np; + struct clk *ptp_clk; + struct clk *enet_ref; struct regmap *gpr; + u32 clksel; + np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-fec"); + if (!np) { + pr_warn("%s: failed to find fec node\n", __func__); + return; + } + + ptp_clk = of_clk_get(np, 2); + if (IS_ERR(ptp_clk)) { + pr_warn("%s: failed to get ptp clock\n", __func__); + goto put_node; + } + + enet_ref = clk_get_sys(NULL, "enet_ref"); + if (IS_ERR(enet_ref)) { + pr_warn("%s: failed to get enet clock\n", __func__); + goto put_ptp_clk; + } + + /* + * If enet_ref from ANATOP/CCM is the PTP clock source, we need to + * set bit IOMUXC_GPR1[21]. Or the PTP clock must be from pad + * (external OSC), and we need to clear the bit. + */ + clksel = ptp_clk == enet_ref ? IMX6Q_GPR1_ENET_CLK_SEL_ANATOP : + IMX6Q_GPR1_ENET_CLK_SEL_PAD; gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr"); if (!IS_ERR(gpr)) regmap_update_bits(gpr, IOMUXC_GPR1, IMX6Q_GPR1_ENET_CLK_SEL_MASK, - IMX6Q_GPR1_ENET_CLK_SEL_ANATOP); + clksel); else pr_err("failed to find fsl,imx6q-iomux-gpr regmap\n"); + clk_put(enet_ref); +put_ptp_clk: + clk_put(ptp_clk); +put_node: + of_node_put(np); +} + +static void __init imx6q_axi_init(void) +{ + struct regmap *gpr; + unsigned int mask; + + gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr"); + if (!IS_ERR(gpr)) { + /* + * Enable the cacheable attribute of VPU and IPU + * AXI transactions. + */ + mask = IMX6Q_GPR4_VPU_WR_CACHE_SEL | + IMX6Q_GPR4_VPU_RD_CACHE_SEL | + IMX6Q_GPR4_VPU_P_WR_CACHE_VAL | + IMX6Q_GPR4_VPU_P_RD_CACHE_VAL_MASK | + IMX6Q_GPR4_IPU_WR_CACHE_CTL | + IMX6Q_GPR4_IPU_RD_CACHE_CTL; + regmap_update_bits(gpr, IOMUXC_GPR4, mask, mask); + + /* Increase IPU read QoS priority */ + regmap_update_bits(gpr, IOMUXC_GPR6, + IMX6Q_GPR6_IPU1_ID00_RD_QOS_MASK | + IMX6Q_GPR6_IPU1_ID01_RD_QOS_MASK, + (0xf << 16) | (0x7 << 20)); + regmap_update_bits(gpr, IOMUXC_GPR7, + IMX6Q_GPR7_IPU2_ID00_RD_QOS_MASK | + IMX6Q_GPR7_IPU2_ID01_RD_QOS_MASK, + (0xf << 16) | (0x7 << 20)); + } else { + pr_warn("failed to find fsl,imx6q-iomuxc-gpr regmap\n"); + } } static void __init imx6q_init_machine(void) @@ -212,15 +279,18 @@ static void __init imx6q_init_machine(void) of_platform_populate(NULL, of_default_bus_match_table, NULL, parent); imx_anatop_init(); - imx6q_pm_init(); + cpu_is_imx6q() ? imx6q_pm_init() : imx6dl_pm_init(); imx6q_1588_init(); + imx6q_axi_init(); } #define OCOTP_CFG3 0x440 #define OCOTP_CFG3_SPEED_SHIFT 16 #define OCOTP_CFG3_SPEED_1P2GHZ 0x3 +#define OCOTP_CFG3_SPEED_996MHZ 0x2 +#define OCOTP_CFG3_SPEED_852MHZ 0x1 -static void __init imx6q_opp_check_1p2ghz(struct device *cpu_dev) +static void __init imx6q_opp_check_speed_grading(struct device *cpu_dev) { struct device_node *np; void __iomem *base; @@ -238,11 +308,29 @@ static void __init imx6q_opp_check_1p2ghz(struct device *cpu_dev) goto put_node; } + /* + * SPEED_GRADING[1:0] defines the max speed of ARM: + * 2b'11: 1200000000Hz; + * 2b'10: 996000000Hz; + * 2b'01: 852000000Hz; -- i.MX6Q Only, exclusive with 996MHz. + * 2b'00: 792000000Hz; + * We need to set the max speed of ARM according to fuse map. + */ val = readl_relaxed(base + OCOTP_CFG3); val >>= OCOTP_CFG3_SPEED_SHIFT; - if ((val & 0x3) != OCOTP_CFG3_SPEED_1P2GHZ) + val &= 0x3; + + if (val != OCOTP_CFG3_SPEED_1P2GHZ) if (dev_pm_opp_disable(cpu_dev, 1200000000)) pr_warn("failed to disable 1.2 GHz OPP\n"); + if (val < OCOTP_CFG3_SPEED_996MHZ) + if (dev_pm_opp_disable(cpu_dev, 996000000)) + pr_warn("failed to disable 996 MHz OPP\n"); + if (cpu_is_imx6q()) { + if (val != OCOTP_CFG3_SPEED_852MHZ) + if (dev_pm_opp_disable(cpu_dev, 852000000)) + pr_warn("failed to disable 852 MHz OPP\n"); + } put_node: of_node_put(np); @@ -268,7 +356,7 @@ static void __init imx6q_opp_init(void) goto put_node; } - imx6q_opp_check_1p2ghz(cpu_dev); + imx6q_opp_check_speed_grading(cpu_dev); put_node: of_node_put(np); diff --git a/arch/arm/mach-imx/mach-imx6sl.c b/arch/arm/mach-imx/mach-imx6sl.c index 0f4fd4c0ab8..ad323385115 100644 --- a/arch/arm/mach-imx/mach-imx6sl.c +++ b/arch/arm/mach-imx/mach-imx6sl.c @@ -17,6 +17,7 @@ #include <asm/mach/map.h> #include "common.h" +#include "cpuidle.h" static void __init imx6sl_fec_init(void) { @@ -39,6 +40,8 @@ static void __init imx6sl_init_late(void) /* imx6sl reuses imx6q cpufreq driver */ if (IS_ENABLED(CONFIG_ARM_IMX6Q_CPUFREQ)) platform_device_register_simple("imx6q-cpufreq", -1, NULL, 0); + + imx6sl_cpuidle_init(); } static void __init imx6sl_init_machine(void) @@ -55,8 +58,7 @@ static void __init imx6sl_init_machine(void) imx6sl_fec_init(); imx_anatop_init(); - /* Reuse imx6q pm code */ - imx6q_pm_init(); + imx6sl_pm_init(); } static void __init imx6sl_init_irq(void) diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c new file mode 100644 index 00000000000..16f0d249f6a --- /dev/null +++ b/arch/arm/mach-imx/pm-imx6.c @@ -0,0 +1,552 @@ +/* + * Copyright 2011-2014 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/genalloc.h> +#include <linux/mfd/syscon.h> +#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> +#include <linux/regmap.h> +#include <linux/suspend.h> +#include <asm/cacheflush.h> +#include <asm/fncpy.h> +#include <asm/proc-fns.h> +#include <asm/suspend.h> +#include <asm/tlb.h> + +#include "common.h" +#include "hardware.h" + +#define CCR 0x0 +#define BM_CCR_WB_COUNT (0x7 << 16) +#define BM_CCR_RBC_BYPASS_COUNT (0x3f << 21) +#define BM_CCR_RBC_EN (0x1 << 27) + +#define CLPCR 0x54 +#define BP_CLPCR_LPM 0 +#define BM_CLPCR_LPM (0x3 << 0) +#define BM_CLPCR_BYPASS_PMIC_READY (0x1 << 2) +#define BM_CLPCR_ARM_CLK_DIS_ON_LPM (0x1 << 5) +#define BM_CLPCR_SBYOS (0x1 << 6) +#define BM_CLPCR_DIS_REF_OSC (0x1 << 7) +#define BM_CLPCR_VSTBY (0x1 << 8) +#define BP_CLPCR_STBY_COUNT 9 +#define BM_CLPCR_STBY_COUNT (0x3 << 9) +#define BM_CLPCR_COSC_PWRDOWN (0x1 << 11) +#define BM_CLPCR_WB_PER_AT_LPM (0x1 << 16) +#define BM_CLPCR_WB_CORE_AT_LPM (0x1 << 17) +#define BM_CLPCR_BYP_MMDC_CH0_LPM_HS (0x1 << 19) +#define BM_CLPCR_BYP_MMDC_CH1_LPM_HS (0x1 << 21) +#define BM_CLPCR_MASK_CORE0_WFI (0x1 << 22) +#define BM_CLPCR_MASK_CORE1_WFI (0x1 << 23) +#define BM_CLPCR_MASK_CORE2_WFI (0x1 << 24) +#define BM_CLPCR_MASK_CORE3_WFI (0x1 << 25) +#define BM_CLPCR_MASK_SCU_IDLE (0x1 << 26) +#define BM_CLPCR_MASK_L2CC_IDLE (0x1 << 27) + +#define CGPR 0x64 +#define BM_CGPR_INT_MEM_CLK_LPM (0x1 << 17) + +#define MX6Q_SUSPEND_OCRAM_SIZE 0x1000 +#define MX6_MAX_MMDC_IO_NUM 33 + +static void __iomem *ccm_base; +static void __iomem *suspend_ocram_base; +static void (*imx6_suspend_in_ocram_fn)(void __iomem *ocram_vbase); + +/* + * suspend ocram space layout: + * ======================== high address ====================== + * . + * . + * . + * ^ + * ^ + * ^ + * imx6_suspend code + * PM_INFO structure(imx6_cpu_pm_info) + * ======================== low address ======================= + */ + +struct imx6_pm_base { + phys_addr_t pbase; + void __iomem *vbase; +}; + +struct imx6_pm_socdata { + u32 cpu_type; + const char *mmdc_compat; + const char *src_compat; + const char *iomuxc_compat; + const char *gpc_compat; + const u32 mmdc_io_num; + const u32 *mmdc_io_offset; +}; + +static const u32 imx6q_mmdc_io_offset[] __initconst = { + 0x5ac, 0x5b4, 0x528, 0x520, /* DQM0 ~ DQM3 */ + 0x514, 0x510, 0x5bc, 0x5c4, /* DQM4 ~ DQM7 */ + 0x56c, 0x578, 0x588, 0x594, /* CAS, RAS, SDCLK_0, SDCLK_1 */ + 0x5a8, 0x5b0, 0x524, 0x51c, /* SDQS0 ~ SDQS3 */ + 0x518, 0x50c, 0x5b8, 0x5c0, /* SDQS4 ~ SDQS7 */ + 0x784, 0x788, 0x794, 0x79c, /* GPR_B0DS ~ GPR_B3DS */ + 0x7a0, 0x7a4, 0x7a8, 0x748, /* GPR_B4DS ~ GPR_B7DS */ + 0x59c, 0x5a0, 0x750, 0x774, /* SODT0, SODT1, MODE_CTL, MODE */ + 0x74c, /* GPR_ADDS */ +}; + +static const u32 imx6dl_mmdc_io_offset[] __initconst = { + 0x470, 0x474, 0x478, 0x47c, /* DQM0 ~ DQM3 */ + 0x480, 0x484, 0x488, 0x48c, /* DQM4 ~ DQM7 */ + 0x464, 0x490, 0x4ac, 0x4b0, /* CAS, RAS, SDCLK_0, SDCLK_1 */ + 0x4bc, 0x4c0, 0x4c4, 0x4c8, /* DRAM_SDQS0 ~ DRAM_SDQS3 */ + 0x4cc, 0x4d0, 0x4d4, 0x4d8, /* DRAM_SDQS4 ~ DRAM_SDQS7 */ + 0x764, 0x770, 0x778, 0x77c, /* GPR_B0DS ~ GPR_B3DS */ + 0x780, 0x784, 0x78c, 0x748, /* GPR_B4DS ~ GPR_B7DS */ + 0x4b4, 0x4b8, 0x750, 0x760, /* SODT0, SODT1, MODE_CTL, MODE */ + 0x74c, /* GPR_ADDS */ +}; + +static const u32 imx6sl_mmdc_io_offset[] __initconst = { + 0x30c, 0x310, 0x314, 0x318, /* DQM0 ~ DQM3 */ + 0x5c4, 0x5cc, 0x5d4, 0x5d8, /* GPR_B0DS ~ GPR_B3DS */ + 0x300, 0x31c, 0x338, 0x5ac, /* CAS, RAS, SDCLK_0, GPR_ADDS */ + 0x33c, 0x340, 0x5b0, 0x5c0, /* SODT0, SODT1, MODE_CTL, MODE */ + 0x330, 0x334, 0x320, /* SDCKE0, SDCKE1, RESET */ +}; + +static const struct imx6_pm_socdata imx6q_pm_data __initconst = { + .cpu_type = MXC_CPU_IMX6Q, + .mmdc_compat = "fsl,imx6q-mmdc", + .src_compat = "fsl,imx6q-src", + .iomuxc_compat = "fsl,imx6q-iomuxc", + .gpc_compat = "fsl,imx6q-gpc", + .mmdc_io_num = ARRAY_SIZE(imx6q_mmdc_io_offset), + .mmdc_io_offset = imx6q_mmdc_io_offset, +}; + +static const struct imx6_pm_socdata imx6dl_pm_data __initconst = { + .cpu_type = MXC_CPU_IMX6DL, + .mmdc_compat = "fsl,imx6q-mmdc", + .src_compat = "fsl,imx6q-src", + .iomuxc_compat = "fsl,imx6dl-iomuxc", + .gpc_compat = "fsl,imx6q-gpc", + .mmdc_io_num = ARRAY_SIZE(imx6dl_mmdc_io_offset), + .mmdc_io_offset = imx6dl_mmdc_io_offset, +}; + +static const struct imx6_pm_socdata imx6sl_pm_data __initconst = { + .cpu_type = MXC_CPU_IMX6SL, + .mmdc_compat = "fsl,imx6sl-mmdc", + .src_compat = "fsl,imx6sl-src", + .iomuxc_compat = "fsl,imx6sl-iomuxc", + .gpc_compat = "fsl,imx6sl-gpc", + .mmdc_io_num = ARRAY_SIZE(imx6sl_mmdc_io_offset), + .mmdc_io_offset = imx6sl_mmdc_io_offset, +}; + +/* + * This structure is for passing necessary data for low level ocram + * suspend code(arch/arm/mach-imx/suspend-imx6.S), if this struct + * definition is changed, the offset definition in + * arch/arm/mach-imx/suspend-imx6.S must be also changed accordingly, + * otherwise, the suspend to ocram function will be broken! + */ +struct imx6_cpu_pm_info { + phys_addr_t pbase; /* The physical address of pm_info. */ + phys_addr_t resume_addr; /* The physical resume address for asm code */ + u32 cpu_type; + u32 pm_info_size; /* Size of pm_info. */ + struct imx6_pm_base mmdc_base; + struct imx6_pm_base src_base; + struct imx6_pm_base iomuxc_base; + struct imx6_pm_base ccm_base; + struct imx6_pm_base gpc_base; + struct imx6_pm_base l2_base; + u32 mmdc_io_num; /* Number of MMDC IOs which need saved/restored. */ + u32 mmdc_io_val[MX6_MAX_MMDC_IO_NUM][2]; /* To save offset and value */ +} __aligned(8); + +void imx6q_set_int_mem_clk_lpm(void) +{ + u32 val = readl_relaxed(ccm_base + CGPR); + + val |= BM_CGPR_INT_MEM_CLK_LPM; + writel_relaxed(val, ccm_base + CGPR); +} + +static void imx6q_enable_rbc(bool enable) +{ + u32 val; + + /* + * need to mask all interrupts in GPC before + * operating RBC configurations + */ + imx_gpc_mask_all(); + + /* configure RBC enable bit */ + val = readl_relaxed(ccm_base + CCR); + val &= ~BM_CCR_RBC_EN; + val |= enable ? BM_CCR_RBC_EN : 0; + writel_relaxed(val, ccm_base + CCR); + + /* configure RBC count */ + val = readl_relaxed(ccm_base + CCR); + val &= ~BM_CCR_RBC_BYPASS_COUNT; + val |= enable ? BM_CCR_RBC_BYPASS_COUNT : 0; + writel(val, ccm_base + CCR); + + /* + * need to delay at least 2 cycles of CKIL(32K) + * due to hardware design requirement, which is + * ~61us, here we use 65us for safe + */ + udelay(65); + + /* restore GPC interrupt mask settings */ + imx_gpc_restore_all(); +} + +static void imx6q_enable_wb(bool enable) +{ + u32 val; + + /* configure well bias enable bit */ + val = readl_relaxed(ccm_base + CLPCR); + val &= ~BM_CLPCR_WB_PER_AT_LPM; + val |= enable ? BM_CLPCR_WB_PER_AT_LPM : 0; + writel_relaxed(val, ccm_base + CLPCR); + + /* configure well bias count */ + val = readl_relaxed(ccm_base + CCR); + val &= ~BM_CCR_WB_COUNT; + val |= enable ? BM_CCR_WB_COUNT : 0; + writel_relaxed(val, ccm_base + CCR); +} + +int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode) +{ + struct irq_desc *iomuxc_irq_desc; + u32 val = readl_relaxed(ccm_base + CLPCR); + + val &= ~BM_CLPCR_LPM; + switch (mode) { + case WAIT_CLOCKED: + break; + case WAIT_UNCLOCKED: + val |= 0x1 << BP_CLPCR_LPM; + val |= BM_CLPCR_ARM_CLK_DIS_ON_LPM; + break; + case STOP_POWER_ON: + val |= 0x2 << BP_CLPCR_LPM; + break; + case WAIT_UNCLOCKED_POWER_OFF: + val |= 0x1 << BP_CLPCR_LPM; + val &= ~BM_CLPCR_VSTBY; + val &= ~BM_CLPCR_SBYOS; + break; + case STOP_POWER_OFF: + val |= 0x2 << BP_CLPCR_LPM; + val |= 0x3 << BP_CLPCR_STBY_COUNT; + val |= BM_CLPCR_VSTBY; + val |= BM_CLPCR_SBYOS; + if (cpu_is_imx6sl()) { + val |= BM_CLPCR_BYPASS_PMIC_READY; + val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS; + } else { + val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS; + } + break; + default: + return -EINVAL; + } + + /* + * ERR007265: CCM: When improper low-power sequence is used, + * the SoC enters low power mode before the ARM core executes WFI. + * + * Software workaround: + * 1) Software should trigger IRQ #32 (IOMUX) to be always pending + * by setting IOMUX_GPR1_GINT. + * 2) Software should then unmask IRQ #32 in GPC before setting CCM + * Low-Power mode. + * 3) Software should mask IRQ #32 right after CCM Low-Power mode + * is set (set bits 0-1 of CCM_CLPCR). + */ + iomuxc_irq_desc = irq_to_desc(32); + imx_gpc_irq_unmask(&iomuxc_irq_desc->irq_data); + writel_relaxed(val, ccm_base + CLPCR); + imx_gpc_irq_mask(&iomuxc_irq_desc->irq_data); + + return 0; +} + +static int imx6q_suspend_finish(unsigned long val) +{ + if (!imx6_suspend_in_ocram_fn) { + cpu_do_idle(); + } else { + /* + * call low level suspend function in ocram, + * as we need to float DDR IO. + */ + local_flush_tlb_all(); + imx6_suspend_in_ocram_fn(suspend_ocram_base); + } + + return 0; +} + +static int imx6q_pm_enter(suspend_state_t state) +{ + switch (state) { + case PM_SUSPEND_MEM: + imx6q_set_lpm(STOP_POWER_OFF); + imx6q_enable_wb(true); + /* + * For suspend into ocram, asm code already take care of + * RBC setting, so we do NOT need to do that here. + */ + if (!imx6_suspend_in_ocram_fn) + imx6q_enable_rbc(true); + imx_gpc_pre_suspend(); + imx_anatop_pre_suspend(); + imx_set_cpu_jump(0, v7_cpu_resume); + /* Zzz ... */ + cpu_suspend(0, imx6q_suspend_finish); + if (cpu_is_imx6q() || cpu_is_imx6dl()) + imx_smp_prepare(); + imx_anatop_post_resume(); + imx_gpc_post_resume(); + imx6q_enable_rbc(false); + imx6q_enable_wb(false); + imx6q_set_lpm(WAIT_CLOCKED); + break; + default: + return -EINVAL; + } + + return 0; +} + +static const struct platform_suspend_ops imx6q_pm_ops = { + .enter = imx6q_pm_enter, + .valid = suspend_valid_only_mem, +}; + +void __init imx6q_pm_set_ccm_base(void __iomem *base) +{ + ccm_base = base; +} + +static int __init imx6_pm_get_base(struct imx6_pm_base *base, + const char *compat) +{ + struct device_node *node; + struct resource res; + int ret = 0; + + node = of_find_compatible_node(NULL, NULL, compat); + if (!node) { + ret = -ENODEV; + goto out; + } + + ret = of_address_to_resource(node, 0, &res); + if (ret) + goto put_node; + + base->pbase = res.start; + base->vbase = ioremap(res.start, resource_size(&res)); + if (!base->vbase) + ret = -ENOMEM; + +put_node: + of_node_put(node); +out: + return ret; +} + +static int __init imx6q_suspend_init(const struct imx6_pm_socdata *socdata) +{ + phys_addr_t ocram_pbase; + struct device_node *node; + struct platform_device *pdev; + struct imx6_cpu_pm_info *pm_info; + struct gen_pool *ocram_pool; + unsigned long ocram_base; + int i, ret = 0; + const u32 *mmdc_offset_array; + + suspend_set_ops(&imx6q_pm_ops); + + if (!socdata) { + pr_warn("%s: invalid argument!\n", __func__); + return -EINVAL; + } + + node = of_find_compatible_node(NULL, NULL, "mmio-sram"); + if (!node) { + pr_warn("%s: failed to find ocram node!\n", __func__); + return -ENODEV; + } + + pdev = of_find_device_by_node(node); + if (!pdev) { + pr_warn("%s: failed to find ocram device!\n", __func__); + ret = -ENODEV; + goto put_node; + } + + ocram_pool = dev_get_gen_pool(&pdev->dev); + if (!ocram_pool) { + pr_warn("%s: ocram pool unavailable!\n", __func__); + ret = -ENODEV; + goto put_node; + } + + ocram_base = gen_pool_alloc(ocram_pool, MX6Q_SUSPEND_OCRAM_SIZE); + if (!ocram_base) { + pr_warn("%s: unable to alloc ocram!\n", __func__); + ret = -ENOMEM; + goto put_node; + } + + ocram_pbase = gen_pool_virt_to_phys(ocram_pool, ocram_base); + + suspend_ocram_base = __arm_ioremap_exec(ocram_pbase, + MX6Q_SUSPEND_OCRAM_SIZE, false); + + pm_info = suspend_ocram_base; + pm_info->pbase = ocram_pbase; + pm_info->resume_addr = virt_to_phys(v7_cpu_resume); + pm_info->pm_info_size = sizeof(*pm_info); + + /* + * ccm physical address is not used by asm code currently, + * so get ccm virtual address directly, as we already have + * it from ccm driver. + */ + pm_info->ccm_base.vbase = ccm_base; + + ret = imx6_pm_get_base(&pm_info->mmdc_base, socdata->mmdc_compat); + if (ret) { + pr_warn("%s: failed to get mmdc base %d!\n", __func__, ret); + goto put_node; + } + + ret = imx6_pm_get_base(&pm_info->src_base, socdata->src_compat); + if (ret) { + pr_warn("%s: failed to get src base %d!\n", __func__, ret); + goto src_map_failed; + } + + ret = imx6_pm_get_base(&pm_info->iomuxc_base, socdata->iomuxc_compat); + if (ret) { + pr_warn("%s: failed to get iomuxc base %d!\n", __func__, ret); + goto iomuxc_map_failed; + } + + ret = imx6_pm_get_base(&pm_info->gpc_base, socdata->gpc_compat); + if (ret) { + pr_warn("%s: failed to get gpc base %d!\n", __func__, ret); + goto gpc_map_failed; + } + + ret = imx6_pm_get_base(&pm_info->l2_base, "arm,pl310-cache"); + if (ret) { + pr_warn("%s: failed to get pl310-cache base %d!\n", + __func__, ret); + goto pl310_cache_map_failed; + } + + pm_info->cpu_type = socdata->cpu_type; + pm_info->mmdc_io_num = socdata->mmdc_io_num; + mmdc_offset_array = socdata->mmdc_io_offset; + + for (i = 0; i < pm_info->mmdc_io_num; i++) { + pm_info->mmdc_io_val[i][0] = + mmdc_offset_array[i]; + pm_info->mmdc_io_val[i][1] = + readl_relaxed(pm_info->iomuxc_base.vbase + + mmdc_offset_array[i]); + } + + imx6_suspend_in_ocram_fn = fncpy( + suspend_ocram_base + sizeof(*pm_info), + &imx6_suspend, + MX6Q_SUSPEND_OCRAM_SIZE - sizeof(*pm_info)); + + goto put_node; + +pl310_cache_map_failed: + iounmap(&pm_info->gpc_base.vbase); +gpc_map_failed: + iounmap(&pm_info->iomuxc_base.vbase); +iomuxc_map_failed: + iounmap(&pm_info->src_base.vbase); +src_map_failed: + iounmap(&pm_info->mmdc_base.vbase); +put_node: + of_node_put(node); + + return ret; +} + +static void __init imx6_pm_common_init(const struct imx6_pm_socdata + *socdata) +{ + struct regmap *gpr; + int ret; + + WARN_ON(!ccm_base); + + if (IS_ENABLED(CONFIG_SUSPEND)) { + ret = imx6q_suspend_init(socdata); + if (ret) + pr_warn("%s: No DDR LPM support with suspend %d!\n", + __func__, ret); + } + + /* + * This is for SW workaround step #1 of ERR007265, see comments + * in imx6q_set_lpm for details of this errata. + * Force IOMUXC irq pending, so that the interrupt to GPC can be + * used to deassert dsm_request signal when the signal gets + * asserted unexpectedly. + */ + gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr"); + if (!IS_ERR(gpr)) + regmap_update_bits(gpr, IOMUXC_GPR1, IMX6Q_GPR1_GINT, + IMX6Q_GPR1_GINT); +} + +void __init imx6q_pm_init(void) +{ + imx6_pm_common_init(&imx6q_pm_data); +} + +void __init imx6dl_pm_init(void) +{ + imx6_pm_common_init(&imx6dl_pm_data); +} + +void __init imx6sl_pm_init(void) +{ + imx6_pm_common_init(&imx6sl_pm_data); +} diff --git a/arch/arm/mach-imx/pm-imx6q.c b/arch/arm/mach-imx/pm-imx6q.c deleted file mode 100644 index 9d47adc078a..00000000000 --- a/arch/arm/mach-imx/pm-imx6q.c +++ /dev/null @@ -1,243 +0,0 @@ -/* - * Copyright 2011-2013 Freescale Semiconductor, Inc. - * Copyright 2011 Linaro Ltd. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -#include <linux/delay.h> -#include <linux/init.h> -#include <linux/io.h> -#include <linux/irq.h> -#include <linux/mfd/syscon.h> -#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <linux/regmap.h> -#include <linux/suspend.h> -#include <asm/cacheflush.h> -#include <asm/proc-fns.h> -#include <asm/suspend.h> -#include <asm/hardware/cache-l2x0.h> - -#include "common.h" -#include "hardware.h" - -#define CCR 0x0 -#define BM_CCR_WB_COUNT (0x7 << 16) -#define BM_CCR_RBC_BYPASS_COUNT (0x3f << 21) -#define BM_CCR_RBC_EN (0x1 << 27) - -#define CLPCR 0x54 -#define BP_CLPCR_LPM 0 -#define BM_CLPCR_LPM (0x3 << 0) -#define BM_CLPCR_BYPASS_PMIC_READY (0x1 << 2) -#define BM_CLPCR_ARM_CLK_DIS_ON_LPM (0x1 << 5) -#define BM_CLPCR_SBYOS (0x1 << 6) -#define BM_CLPCR_DIS_REF_OSC (0x1 << 7) -#define BM_CLPCR_VSTBY (0x1 << 8) -#define BP_CLPCR_STBY_COUNT 9 -#define BM_CLPCR_STBY_COUNT (0x3 << 9) -#define BM_CLPCR_COSC_PWRDOWN (0x1 << 11) -#define BM_CLPCR_WB_PER_AT_LPM (0x1 << 16) -#define BM_CLPCR_WB_CORE_AT_LPM (0x1 << 17) -#define BM_CLPCR_BYP_MMDC_CH0_LPM_HS (0x1 << 19) -#define BM_CLPCR_BYP_MMDC_CH1_LPM_HS (0x1 << 21) -#define BM_CLPCR_MASK_CORE0_WFI (0x1 << 22) -#define BM_CLPCR_MASK_CORE1_WFI (0x1 << 23) -#define BM_CLPCR_MASK_CORE2_WFI (0x1 << 24) -#define BM_CLPCR_MASK_CORE3_WFI (0x1 << 25) -#define BM_CLPCR_MASK_SCU_IDLE (0x1 << 26) -#define BM_CLPCR_MASK_L2CC_IDLE (0x1 << 27) - -#define CGPR 0x64 -#define BM_CGPR_CHICKEN_BIT (0x1 << 17) - -static void __iomem *ccm_base; - -void imx6q_set_chicken_bit(void) -{ - u32 val = readl_relaxed(ccm_base + CGPR); - - val |= BM_CGPR_CHICKEN_BIT; - writel_relaxed(val, ccm_base + CGPR); -} - -static void imx6q_enable_rbc(bool enable) -{ - u32 val; - - /* - * need to mask all interrupts in GPC before - * operating RBC configurations - */ - imx_gpc_mask_all(); - - /* configure RBC enable bit */ - val = readl_relaxed(ccm_base + CCR); - val &= ~BM_CCR_RBC_EN; - val |= enable ? BM_CCR_RBC_EN : 0; - writel_relaxed(val, ccm_base + CCR); - - /* configure RBC count */ - val = readl_relaxed(ccm_base + CCR); - val &= ~BM_CCR_RBC_BYPASS_COUNT; - val |= enable ? BM_CCR_RBC_BYPASS_COUNT : 0; - writel(val, ccm_base + CCR); - - /* - * need to delay at least 2 cycles of CKIL(32K) - * due to hardware design requirement, which is - * ~61us, here we use 65us for safe - */ - udelay(65); - - /* restore GPC interrupt mask settings */ - imx_gpc_restore_all(); -} - -static void imx6q_enable_wb(bool enable) -{ - u32 val; - - /* configure well bias enable bit */ - val = readl_relaxed(ccm_base + CLPCR); - val &= ~BM_CLPCR_WB_PER_AT_LPM; - val |= enable ? BM_CLPCR_WB_PER_AT_LPM : 0; - writel_relaxed(val, ccm_base + CLPCR); - - /* configure well bias count */ - val = readl_relaxed(ccm_base + CCR); - val &= ~BM_CCR_WB_COUNT; - val |= enable ? BM_CCR_WB_COUNT : 0; - writel_relaxed(val, ccm_base + CCR); -} - -int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode) -{ - struct irq_desc *iomuxc_irq_desc; - u32 val = readl_relaxed(ccm_base + CLPCR); - - val &= ~BM_CLPCR_LPM; - switch (mode) { - case WAIT_CLOCKED: - break; - case WAIT_UNCLOCKED: - val |= 0x1 << BP_CLPCR_LPM; - val |= BM_CLPCR_ARM_CLK_DIS_ON_LPM; - break; - case STOP_POWER_ON: - val |= 0x2 << BP_CLPCR_LPM; - break; - case WAIT_UNCLOCKED_POWER_OFF: - val |= 0x1 << BP_CLPCR_LPM; - val &= ~BM_CLPCR_VSTBY; - val &= ~BM_CLPCR_SBYOS; - break; - case STOP_POWER_OFF: - val |= 0x2 << BP_CLPCR_LPM; - val |= 0x3 << BP_CLPCR_STBY_COUNT; - val |= BM_CLPCR_VSTBY; - val |= BM_CLPCR_SBYOS; - if (cpu_is_imx6sl()) { - val |= BM_CLPCR_BYPASS_PMIC_READY; - val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS; - } else { - val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS; - } - break; - default: - return -EINVAL; - } - - /* - * ERR007265: CCM: When improper low-power sequence is used, - * the SoC enters low power mode before the ARM core executes WFI. - * - * Software workaround: - * 1) Software should trigger IRQ #32 (IOMUX) to be always pending - * by setting IOMUX_GPR1_GINT. - * 2) Software should then unmask IRQ #32 in GPC before setting CCM - * Low-Power mode. - * 3) Software should mask IRQ #32 right after CCM Low-Power mode - * is set (set bits 0-1 of CCM_CLPCR). - */ - iomuxc_irq_desc = irq_to_desc(32); - imx_gpc_irq_unmask(&iomuxc_irq_desc->irq_data); - writel_relaxed(val, ccm_base + CLPCR); - imx_gpc_irq_mask(&iomuxc_irq_desc->irq_data); - - return 0; -} - -static int imx6q_suspend_finish(unsigned long val) -{ - cpu_do_idle(); - return 0; -} - -static int imx6q_pm_enter(suspend_state_t state) -{ - switch (state) { - case PM_SUSPEND_MEM: - imx6q_set_lpm(STOP_POWER_OFF); - imx6q_enable_wb(true); - imx6q_enable_rbc(true); - imx_gpc_pre_suspend(); - imx_anatop_pre_suspend(); - imx_set_cpu_jump(0, v7_cpu_resume); - /* Zzz ... */ - cpu_suspend(0, imx6q_suspend_finish); - if (cpu_is_imx6q() || cpu_is_imx6dl()) - imx_smp_prepare(); - imx_anatop_post_resume(); - imx_gpc_post_resume(); - imx6q_enable_rbc(false); - imx6q_enable_wb(false); - imx6q_set_lpm(WAIT_CLOCKED); - break; - default: - return -EINVAL; - } - - return 0; -} - -static const struct platform_suspend_ops imx6q_pm_ops = { - .enter = imx6q_pm_enter, - .valid = suspend_valid_only_mem, -}; - -void __init imx6q_pm_set_ccm_base(void __iomem *base) -{ - ccm_base = base; -} - -void __init imx6q_pm_init(void) -{ - struct regmap *gpr; - - WARN_ON(!ccm_base); - - /* - * This is for SW workaround step #1 of ERR007265, see comments - * in imx6q_set_lpm for details of this errata. - * Force IOMUXC irq pending, so that the interrupt to GPC can be - * used to deassert dsm_request signal when the signal gets - * asserted unexpectedly. - */ - gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr"); - if (!IS_ERR(gpr)) - regmap_update_bits(gpr, IOMUXC_GPR1, IMX6Q_GPR1_GINT, - IMX6Q_GPR1_GINT); - - /* Set initial power mode */ - imx6q_set_lpm(WAIT_CLOCKED); - - suspend_set_ops(&imx6q_pm_ops); -} diff --git a/arch/arm/mach-imx/suspend-imx6.S b/arch/arm/mach-imx/suspend-imx6.S new file mode 100644 index 00000000000..20048ff0573 --- /dev/null +++ b/arch/arm/mach-imx/suspend-imx6.S @@ -0,0 +1,361 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/linkage.h> +#include <asm/asm-offsets.h> +#include <asm/hardware/cache-l2x0.h> +#include "hardware.h" + +/* + * ==================== low level suspend ==================== + * + * Better to follow below rules to use ARM registers: + * r0: pm_info structure address; + * r1 ~ r4: for saving pm_info members; + * r5 ~ r10: free registers; + * r11: io base address. + * + * suspend ocram space layout: + * ======================== high address ====================== + * . + * . + * . + * ^ + * ^ + * ^ + * imx6_suspend code + * PM_INFO structure(imx6_cpu_pm_info) + * ======================== low address ======================= + */ + +/* + * Below offsets are based on struct imx6_cpu_pm_info + * which defined in arch/arm/mach-imx/pm-imx6q.c, this + * structure contains necessary pm info for low level + * suspend related code. + */ +#define PM_INFO_PBASE_OFFSET 0x0 +#define PM_INFO_RESUME_ADDR_OFFSET 0x4 +#define PM_INFO_CPU_TYPE_OFFSET 0x8 +#define PM_INFO_PM_INFO_SIZE_OFFSET 0xC +#define PM_INFO_MX6Q_MMDC_P_OFFSET 0x10 +#define PM_INFO_MX6Q_MMDC_V_OFFSET 0x14 +#define PM_INFO_MX6Q_SRC_P_OFFSET 0x18 +#define PM_INFO_MX6Q_SRC_V_OFFSET 0x1C +#define PM_INFO_MX6Q_IOMUXC_P_OFFSET 0x20 +#define PM_INFO_MX6Q_IOMUXC_V_OFFSET 0x24 +#define PM_INFO_MX6Q_CCM_P_OFFSET 0x28 +#define PM_INFO_MX6Q_CCM_V_OFFSET 0x2C +#define PM_INFO_MX6Q_GPC_P_OFFSET 0x30 +#define PM_INFO_MX6Q_GPC_V_OFFSET 0x34 +#define PM_INFO_MX6Q_L2_P_OFFSET 0x38 +#define PM_INFO_MX6Q_L2_V_OFFSET 0x3C +#define PM_INFO_MMDC_IO_NUM_OFFSET 0x40 +#define PM_INFO_MMDC_IO_VAL_OFFSET 0x44 + +#define MX6Q_SRC_GPR1 0x20 +#define MX6Q_SRC_GPR2 0x24 +#define MX6Q_MMDC_MAPSR 0x404 +#define MX6Q_MMDC_MPDGCTRL0 0x83c +#define MX6Q_GPC_IMR1 0x08 +#define MX6Q_GPC_IMR2 0x0c +#define MX6Q_GPC_IMR3 0x10 +#define MX6Q_GPC_IMR4 0x14 +#define MX6Q_CCM_CCR 0x0 + + .align 3 + + .macro sync_l2_cache + + /* sync L2 cache to drain L2's buffers to DRAM. */ +#ifdef CONFIG_CACHE_L2X0 + ldr r11, [r0, #PM_INFO_MX6Q_L2_V_OFFSET] + mov r6, #0x0 + str r6, [r11, #L2X0_CACHE_SYNC] +1: + ldr r6, [r11, #L2X0_CACHE_SYNC] + ands r6, r6, #0x1 + bne 1b +#endif + + .endm + + .macro resume_mmdc + + /* restore MMDC IO */ + cmp r5, #0x0 + ldreq r11, [r0, #PM_INFO_MX6Q_IOMUXC_V_OFFSET] + ldrne r11, [r0, #PM_INFO_MX6Q_IOMUXC_P_OFFSET] + + ldr r6, [r0, #PM_INFO_MMDC_IO_NUM_OFFSET] + ldr r7, =PM_INFO_MMDC_IO_VAL_OFFSET + add r7, r7, r0 +1: + ldr r8, [r7], #0x4 + ldr r9, [r7], #0x4 + str r9, [r11, r8] + subs r6, r6, #0x1 + bne 1b + + cmp r5, #0x0 + ldreq r11, [r0, #PM_INFO_MX6Q_MMDC_V_OFFSET] + ldrne r11, [r0, #PM_INFO_MX6Q_MMDC_P_OFFSET] + + cmp r3, #MXC_CPU_IMX6SL + bne 4f + + /* reset read FIFO, RST_RD_FIFO */ + ldr r7, =MX6Q_MMDC_MPDGCTRL0 + ldr r6, [r11, r7] + orr r6, r6, #(1 << 31) + str r6, [r11, r7] +2: + ldr r6, [r11, r7] + ands r6, r6, #(1 << 31) + bne 2b + + /* reset FIFO a second time */ + ldr r6, [r11, r7] + orr r6, r6, #(1 << 31) + str r6, [r11, r7] +3: + ldr r6, [r11, r7] + ands r6, r6, #(1 << 31) + bne 3b +4: + /* let DDR out of self-refresh */ + ldr r7, [r11, #MX6Q_MMDC_MAPSR] + bic r7, r7, #(1 << 21) + str r7, [r11, #MX6Q_MMDC_MAPSR] +5: + ldr r7, [r11, #MX6Q_MMDC_MAPSR] + ands r7, r7, #(1 << 25) + bne 5b + + /* enable DDR auto power saving */ + ldr r7, [r11, #MX6Q_MMDC_MAPSR] + bic r7, r7, #0x1 + str r7, [r11, #MX6Q_MMDC_MAPSR] + + .endm + +ENTRY(imx6_suspend) + ldr r1, [r0, #PM_INFO_PBASE_OFFSET] + ldr r2, [r0, #PM_INFO_RESUME_ADDR_OFFSET] + ldr r3, [r0, #PM_INFO_CPU_TYPE_OFFSET] + ldr r4, [r0, #PM_INFO_PM_INFO_SIZE_OFFSET] + + /* + * counting the resume address in iram + * to set it in SRC register. + */ + ldr r6, =imx6_suspend + ldr r7, =resume + sub r7, r7, r6 + add r8, r1, r4 + add r9, r8, r7 + + /* + * make sure TLB contain the addr we want, + * as we will access them after MMDC IO floated. + */ + + ldr r11, [r0, #PM_INFO_MX6Q_CCM_V_OFFSET] + ldr r6, [r11, #0x0] + ldr r11, [r0, #PM_INFO_MX6Q_GPC_V_OFFSET] + ldr r6, [r11, #0x0] + + /* use r11 to store the IO address */ + ldr r11, [r0, #PM_INFO_MX6Q_SRC_V_OFFSET] + /* store physical resume addr and pm_info address. */ + str r9, [r11, #MX6Q_SRC_GPR1] + str r1, [r11, #MX6Q_SRC_GPR2] + + /* need to sync L2 cache before DSM. */ + sync_l2_cache + + ldr r11, [r0, #PM_INFO_MX6Q_MMDC_V_OFFSET] + /* + * put DDR explicitly into self-refresh and + * disable automatic power savings. + */ + ldr r7, [r11, #MX6Q_MMDC_MAPSR] + orr r7, r7, #0x1 + str r7, [r11, #MX6Q_MMDC_MAPSR] + + /* make the DDR explicitly enter self-refresh. */ + ldr r7, [r11, #MX6Q_MMDC_MAPSR] + orr r7, r7, #(1 << 21) + str r7, [r11, #MX6Q_MMDC_MAPSR] + +poll_dvfs_set: + ldr r7, [r11, #MX6Q_MMDC_MAPSR] + ands r7, r7, #(1 << 25) + beq poll_dvfs_set + + ldr r11, [r0, #PM_INFO_MX6Q_IOMUXC_V_OFFSET] + ldr r6, =0x0 + ldr r7, [r0, #PM_INFO_MMDC_IO_NUM_OFFSET] + ldr r8, =PM_INFO_MMDC_IO_VAL_OFFSET + add r8, r8, r0 + /* i.MX6SL's last 3 IOs need special setting */ + cmp r3, #MXC_CPU_IMX6SL + subeq r7, r7, #0x3 +set_mmdc_io_lpm: + ldr r9, [r8], #0x8 + str r6, [r11, r9] + subs r7, r7, #0x1 + bne set_mmdc_io_lpm + + cmp r3, #MXC_CPU_IMX6SL + bne set_mmdc_io_lpm_done + ldr r6, =0x1000 + ldr r9, [r8], #0x8 + str r6, [r11, r9] + ldr r9, [r8], #0x8 + str r6, [r11, r9] + ldr r6, =0x80000 + ldr r9, [r8] + str r6, [r11, r9] +set_mmdc_io_lpm_done: + + /* + * mask all GPC interrupts before + * enabling the RBC counters to + * avoid the counter starting too + * early if an interupt is already + * pending. + */ + ldr r11, [r0, #PM_INFO_MX6Q_GPC_V_OFFSET] + ldr r6, [r11, #MX6Q_GPC_IMR1] + ldr r7, [r11, #MX6Q_GPC_IMR2] + ldr r8, [r11, #MX6Q_GPC_IMR3] + ldr r9, [r11, #MX6Q_GPC_IMR4] + + ldr r10, =0xffffffff + str r10, [r11, #MX6Q_GPC_IMR1] + str r10, [r11, #MX6Q_GPC_IMR2] + str r10, [r11, #MX6Q_GPC_IMR3] + str r10, [r11, #MX6Q_GPC_IMR4] + + /* + * enable the RBC bypass counter here + * to hold off the interrupts. RBC counter + * = 32 (1ms), Minimum RBC delay should be + * 400us for the analog LDOs to power down. + */ + ldr r11, [r0, #PM_INFO_MX6Q_CCM_V_OFFSET] + ldr r10, [r11, #MX6Q_CCM_CCR] + bic r10, r10, #(0x3f << 21) + orr r10, r10, #(0x20 << 21) + str r10, [r11, #MX6Q_CCM_CCR] + + /* enable the counter. */ + ldr r10, [r11, #MX6Q_CCM_CCR] + orr r10, r10, #(0x1 << 27) + str r10, [r11, #MX6Q_CCM_CCR] + + /* unmask all the GPC interrupts. */ + ldr r11, [r0, #PM_INFO_MX6Q_GPC_V_OFFSET] + str r6, [r11, #MX6Q_GPC_IMR1] + str r7, [r11, #MX6Q_GPC_IMR2] + str r8, [r11, #MX6Q_GPC_IMR3] + str r9, [r11, #MX6Q_GPC_IMR4] + + /* + * now delay for a short while (3usec) + * ARM is at 1GHz at this point + * so a short loop should be enough. + * this delay is required to ensure that + * the RBC counter can start counting in + * case an interrupt is already pending + * or in case an interrupt arrives just + * as ARM is about to assert DSM_request. + */ + ldr r6, =2000 +rbc_loop: + subs r6, r6, #0x1 + bne rbc_loop + + /* Zzz, enter stop mode */ + wfi + nop + nop + nop + nop + + /* + * run to here means there is pending + * wakeup source, system should auto + * resume, we need to restore MMDC IO first + */ + mov r5, #0x0 + resume_mmdc + + /* return to suspend finish */ + mov pc, lr + +resume: + /* invalidate L1 I-cache first */ + mov r6, #0x0 + mcr p15, 0, r6, c7, c5, 0 + mcr p15, 0, r6, c7, c5, 6 + /* enable the Icache and branch prediction */ + mov r6, #0x1800 + mcr p15, 0, r6, c1, c0, 0 + isb + + /* get physical resume address from pm_info. */ + ldr lr, [r0, #PM_INFO_RESUME_ADDR_OFFSET] + /* clear core0's entry and parameter */ + ldr r11, [r0, #PM_INFO_MX6Q_SRC_P_OFFSET] + mov r7, #0x0 + str r7, [r11, #MX6Q_SRC_GPR1] + str r7, [r11, #MX6Q_SRC_GPR2] + + ldr r3, [r0, #PM_INFO_CPU_TYPE_OFFSET] + mov r5, #0x1 + resume_mmdc + + mov pc, lr +ENDPROC(imx6_suspend) + +/* + * The following code must assume it is running from physical address + * where absolute virtual addresses to the data section have to be + * turned into relative ones. + */ + +#ifdef CONFIG_CACHE_L2X0 + .macro pl310_resume + adr r0, l2x0_saved_regs_offset + ldr r2, [r0] + add r2, r2, r0 + ldr r0, [r2, #L2X0_R_PHY_BASE] @ get physical base of l2x0 + ldr r1, [r2, #L2X0_R_AUX_CTRL] @ get aux_ctrl value + str r1, [r0, #L2X0_AUX_CTRL] @ restore aux_ctrl + mov r1, #0x1 + str r1, [r0, #L2X0_CTRL] @ re-enable L2 + .endm + +l2x0_saved_regs_offset: + .word l2x0_saved_regs - . + +#else + .macro pl310_resume + .endm +#endif + +ENTRY(v7_cpu_resume) + bl v7_invalidate_l1 + pl310_resume + b cpu_resume +ENDPROC(v7_cpu_resume) diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c index 1a3a5f61577..65222ea0df6 100644 --- a/arch/arm/mach-imx/time.c +++ b/arch/arm/mach-imx/time.c @@ -25,6 +25,7 @@ #include <linux/irq.h> #include <linux/clockchips.h> #include <linux/clk.h> +#include <linux/delay.h> #include <linux/err.h> #include <linux/sched_clock.h> @@ -116,11 +117,22 @@ static u64 notrace mxc_read_sched_clock(void) return sched_clock_reg ? __raw_readl(sched_clock_reg) : 0; } +static struct delay_timer imx_delay_timer; + +static unsigned long imx_read_current_timer(void) +{ + return __raw_readl(sched_clock_reg); +} + static int __init mxc_clocksource_init(struct clk *timer_clk) { unsigned int c = clk_get_rate(timer_clk); void __iomem *reg = timer_base + (timer_is_v2() ? V2_TCN : MX1_2_TCN); + imx_delay_timer.read_current_timer = &imx_read_current_timer; + imx_delay_timer.freq = c; + register_current_timer_delay(&imx_delay_timer); + sched_clock_reg = reg; sched_clock_register(mxc_read_sched_clock, 32, c); diff --git a/arch/arm/mach-keystone/Kconfig b/arch/arm/mach-keystone/Kconfig index 90a708fef54..f50bc936cb8 100644 --- a/arch/arm/mach-keystone/Kconfig +++ b/arch/arm/mach-keystone/Kconfig @@ -1,13 +1,9 @@ config ARCH_KEYSTONE bool "Texas Instruments Keystone Devices" depends on ARCH_MULTI_V7 - select CPU_V7 select ARM_GIC select HAVE_ARM_ARCH_TIMER - select HAVE_SMP select CLKSRC_MMIO - select GENERIC_CLOCKEVENTS - select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_ERRATA_798181 if SMP select COMMON_CLK_KEYSTONE select ARCH_SUPPORTS_BIG_ENDIAN diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index fe8319ad315..df4b26340ae 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -106,13 +106,6 @@ config ARCH_KIRKWOOD_DT Say 'Y' here if you want your kernel to support the Marvell Kirkwood using flattened device tree. -config MACH_MV88F6281GTW_GE_DT - bool "Marvell 88F6281 GTW GE Board (Flattened Device Tree)" - depends on ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the - Marvell 88F6281 GTW GE Board (Flattened Device Tree). - endmenu endif diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile index 144b5110293..3a72c5c6e74 100644 --- a/arch/arm/mach-kirkwood/Makefile +++ b/arch/arm/mach-kirkwood/Makefile @@ -1,5 +1,4 @@ -obj-y += common.o pcie.o -obj-$(CONFIG_KIRKWOOD_LEGACY) += irq.o mpp.o +obj-$(CONFIG_KIRKWOOD_LEGACY) += irq.o mpp.o common.o pcie.o obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_MACH_D2NET_V2) += d2net_v2-setup.o lacie_v2-common.o @@ -13,4 +12,3 @@ obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o obj-$(CONFIG_ARCH_KIRKWOOD_DT) += board-dt.o -obj-$(CONFIG_MACH_MV88F6281GTW_GE_DT) += board-mv88f6281gtw_ge.o diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index 78188159484..2801da49e2a 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -19,11 +19,84 @@ #include <linux/of_platform.h> #include <linux/dma-mapping.h> #include <linux/irqchip.h> -#include <linux/kexec.h> +#include <asm/hardware/cache-feroceon-l2.h> #include <asm/mach/arch.h> +#include <asm/mach/map.h> #include <mach/bridge-regs.h> #include <plat/common.h> -#include "common.h" +#include <plat/pcie.h> +#include "pm.h" + +static struct map_desc kirkwood_io_desc[] __initdata = { + { + .virtual = (unsigned long) KIRKWOOD_REGS_VIRT_BASE, + .pfn = __phys_to_pfn(KIRKWOOD_REGS_PHYS_BASE), + .length = KIRKWOOD_REGS_SIZE, + .type = MT_DEVICE, + }, +}; + +static void __init kirkwood_map_io(void) +{ + iotable_init(kirkwood_io_desc, ARRAY_SIZE(kirkwood_io_desc)); +} + +static struct resource kirkwood_cpufreq_resources[] = { + [0] = { + .start = CPU_CONTROL_PHYS, + .end = CPU_CONTROL_PHYS + 3, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device kirkwood_cpufreq_device = { + .name = "kirkwood-cpufreq", + .id = -1, + .num_resources = ARRAY_SIZE(kirkwood_cpufreq_resources), + .resource = kirkwood_cpufreq_resources, +}; + +static void __init kirkwood_cpufreq_init(void) +{ + platform_device_register(&kirkwood_cpufreq_device); +} + +static struct resource kirkwood_cpuidle_resource[] = { + { + .flags = IORESOURCE_MEM, + .start = DDR_OPERATION_BASE, + .end = DDR_OPERATION_BASE + 3, + }, +}; + +static struct platform_device kirkwood_cpuidle = { + .name = "kirkwood_cpuidle", + .id = -1, + .resource = kirkwood_cpuidle_resource, + .num_resources = 1, +}; + +static void __init kirkwood_cpuidle_init(void) +{ + platform_device_register(&kirkwood_cpuidle); +} + +/* Temporary here since mach-mvebu has a function we can use */ +static void kirkwood_restart(enum reboot_mode mode, const char *cmd) +{ + /* + * Enable soft reset to assert RSTOUTn. + */ + writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK); + + /* + * Assert soft reset. + */ + writel(SOFT_RESET, SYSTEM_SOFT_RESET); + + while (1) + ; +} #define MV643XX_ETH_MAC_ADDR_LOW 0x0414 #define MV643XX_ETH_MAC_ADDR_HIGH 0x0418 @@ -104,35 +177,35 @@ eth_fixup_skip: } } -static void __init kirkwood_dt_init(void) +/* + * Disable propagation of mbus errors to the CPU local bus, as this + * causes mbus errors (which can occur for example for PCI aborts) to + * throw CPU aborts, which we're not set up to deal with. + */ +static void __init kirkwood_disable_mbus_error_propagation(void) { - pr_info("Kirkwood: %s.\n", kirkwood_id()); + void __iomem *cpu_config; - /* - * Disable propagation of mbus errors to the CPU local bus, - * as this causes mbus errors (which can occur for example - * for PCI aborts) to throw CPU aborts, which we're not set - * up to deal with. - */ - writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG); + cpu_config = ioremap(CPU_CONFIG_PHYS, 4); + writel(readl(cpu_config) & ~CPU_CONFIG_ERROR_PROP, cpu_config); + iounmap(cpu_config); +} - BUG_ON(mvebu_mbus_dt_init()); +static void __init kirkwood_dt_init(void) +{ + kirkwood_disable_mbus_error_propagation(); - kirkwood_l2_init(); + BUG_ON(mvebu_mbus_dt_init()); +#ifdef CONFIG_CACHE_FEROCEON_L2 + feroceon_of_init(); +#endif kirkwood_cpufreq_init(); kirkwood_cpuidle_init(); kirkwood_pm_init(); kirkwood_dt_eth_fixup(); -#ifdef CONFIG_KEXEC - kexec_reinit = kirkwood_enable_pcie; -#endif - - if (of_machine_is_compatible("marvell,mv88f6281gtw-ge")) - mv88f6281gtw_ge_init(); - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } diff --git a/arch/arm/mach-kirkwood/board-mv88f6281gtw_ge.c b/arch/arm/mach-kirkwood/board-mv88f6281gtw_ge.c deleted file mode 100644 index ee5eea678c1..00000000000 --- a/arch/arm/mach-kirkwood/board-mv88f6281gtw_ge.c +++ /dev/null @@ -1,50 +0,0 @@ -/* - * arch/arm/mach-kirkwood/board-mv88f6281gtw_ge.c - * - * Marvell 88F6281 GTW GE Board Setup - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/irq.h> -#include <linux/timer.h> -#include <linux/mv643xx_eth.h> -#include <linux/ethtool.h> -#include <linux/gpio.h> -#include <net/dsa.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/pci.h> -#include <mach/kirkwood.h> -#include "common.h" - -static struct mv643xx_eth_platform_data mv88f6281gtw_ge_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_NONE, - .speed = SPEED_1000, - .duplex = DUPLEX_FULL, -}; - -static struct dsa_chip_data mv88f6281gtw_ge_switch_chip_data = { - .port_names[0] = "lan1", - .port_names[1] = "lan2", - .port_names[2] = "lan3", - .port_names[3] = "lan4", - .port_names[4] = "wan", - .port_names[5] = "cpu", -}; - -static struct dsa_platform_data mv88f6281gtw_ge_switch_plat_data = { - .nr_chips = 1, - .chip = &mv88f6281gtw_ge_switch_chip_data, -}; - -void __init mv88f6281gtw_ge_init(void) -{ - kirkwood_ge00_init(&mv88f6281gtw_ge_ge00_data); - kirkwood_ge00_switch_init(&mv88f6281gtw_ge_switch_plat_data, NO_IRQ); -} diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index f3407a5db21..255f33a3903 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -25,10 +25,10 @@ #include <asm/page.h> #include <asm/mach/map.h> #include <asm/mach/time.h> +#include <asm/hardware/cache-feroceon-l2.h> #include <mach/kirkwood.h> #include <mach/bridge-regs.h> #include <linux/platform_data/asoc-kirkwood.h> -#include <plat/cache-feroceon-l2.h> #include <linux/platform_data/mmc-mvsdio.h> #include <linux/platform_data/mtd-orion_nand.h> #include <linux/platform_data/usb-ehci-orion.h> @@ -36,6 +36,7 @@ #include <plat/time.h> #include <linux/platform_data/dma-mv_xor.h> #include "common.h" +#include "pm.h" /* These can go away once Kirkwood uses the mvebu-mbus DT binding */ #define KIRKWOOD_MBUS_NAND_TARGET 0x01 diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h index 05fd648df54..832a4e2ab8d 100644 --- a/arch/arm/mach-kirkwood/common.h +++ b/arch/arm/mach-kirkwood/common.h @@ -58,19 +58,6 @@ void kirkwood_cpufreq_init(void); void kirkwood_restart(enum reboot_mode, const char *); void kirkwood_clk_init(void); -#ifdef CONFIG_PM -void kirkwood_pm_init(void); -#else -static inline void kirkwood_pm_init(void) {}; -#endif - -/* board init functions for boards not fully converted to fdt */ -#ifdef CONFIG_MACH_MV88F6281GTW_GE_DT -void mv88f6281gtw_ge_init(void); -#else -static inline void mv88f6281gtw_ge_init(void) {}; -#endif - /* early init functions not converted to fdt yet */ char *kirkwood_id(void); void kirkwood_l2_init(void); diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h index 8b9d1c9ff19..6e5077e2ec2 100644 --- a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h +++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h @@ -14,6 +14,7 @@ #include <mach/kirkwood.h> #define CPU_CONFIG (BRIDGE_VIRT_BASE + 0x0100) +#define CPU_CONFIG_PHYS (BRIDGE_PHYS_BASE + 0x0100) #define CPU_CONFIG_ERROR_PROP 0x00000004 #define CPU_CONTROL (BRIDGE_VIRT_BASE + 0x0104) @@ -79,5 +80,6 @@ #define CGC_RESERVED (0x6 << 21) #define MEMORY_PM_CTRL (BRIDGE_VIRT_BASE + 0x118) +#define MEMORY_PM_CTRL_PHYS (BRIDGE_PHYS_BASE + 0x118) #endif diff --git a/arch/arm/mach-kirkwood/pm.c b/arch/arm/mach-kirkwood/pm.c index c6ab8d9303a..8e5e0329d04 100644 --- a/arch/arm/mach-kirkwood/pm.c +++ b/arch/arm/mach-kirkwood/pm.c @@ -21,15 +21,16 @@ #include "common.h" static void __iomem *ddr_operation_base; +static void __iomem *memory_pm_ctrl; static void kirkwood_low_power(void) { u32 mem_pm_ctrl; - mem_pm_ctrl = readl(MEMORY_PM_CTRL); + mem_pm_ctrl = readl(memory_pm_ctrl); /* Set peripherals to low-power mode */ - writel_relaxed(~0, MEMORY_PM_CTRL); + writel_relaxed(~0, memory_pm_ctrl); /* Set DDR in self-refresh */ writel_relaxed(0x7, ddr_operation_base); @@ -41,7 +42,7 @@ static void kirkwood_low_power(void) */ cpu_do_idle(); - writel_relaxed(mem_pm_ctrl, MEMORY_PM_CTRL); + writel_relaxed(mem_pm_ctrl, memory_pm_ctrl); } static int kirkwood_suspend_enter(suspend_state_t state) @@ -69,5 +70,7 @@ static const struct platform_suspend_ops kirkwood_suspend_ops = { void __init kirkwood_pm_init(void) { ddr_operation_base = ioremap(DDR_OPERATION_BASE, 4); + memory_pm_ctrl = ioremap(MEMORY_PM_CTRL_PHYS, 4); + suspend_set_ops(&kirkwood_suspend_ops); } diff --git a/arch/arm/mach-kirkwood/pm.h b/arch/arm/mach-kirkwood/pm.h new file mode 100644 index 00000000000..21e7530f368 --- /dev/null +++ b/arch/arm/mach-kirkwood/pm.h @@ -0,0 +1,26 @@ +/* + * Power Management driver for Marvell Kirkwood SoCs + * + * Copyright (C) 2013 Ezequiel Garcia <ezequiel@free-electrons.com> + * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, + * version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __ARCH_KIRKWOOD_PM_H +#define __ARCH_KIRKWOOD_PM_H + +#ifdef CONFIG_PM +void kirkwood_pm_init(void); +#else +static inline void kirkwood_pm_init(void) {}; +#endif + +#endif diff --git a/arch/arm/mach-moxart/Kconfig b/arch/arm/mach-moxart/Kconfig index ba470d64493..95a6a4b43c3 100644 --- a/arch/arm/mach-moxart/Kconfig +++ b/arch/arm/mach-moxart/Kconfig @@ -2,15 +2,9 @@ config ARCH_MOXART bool "MOXA ART SoC" if ARCH_MULTI_V4T select CPU_FA526 select ARM_DMA_MEM_BUFFERABLE - select DMA_OF - select USE_OF - select CLKSRC_OF select CLKSRC_MMIO - select HAVE_CLK - select COMMON_CLK select GENERIC_IRQ_CHIP select ARCH_REQUIRE_GPIOLIB - select GENERIC_CLOCKEVENTS select PHYLIB if NETDEVICES help Say Y here if you want to run your kernel on hardware with a diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig index 9625cf37893..a7f959e58c3 100644 --- a/arch/arm/mach-msm/Kconfig +++ b/arch/arm/mach-msm/Kconfig @@ -1,50 +1,9 @@ -config ARCH_MSM - bool - -config ARCH_MSM_DT - bool "Qualcomm MSM DT Support" if ARCH_MULTI_V7 - select ARCH_MSM - select ARCH_REQUIRE_GPIOLIB - select CLKSRC_OF - select GENERIC_CLOCKEVENTS - help - Support for Qualcomm's devicetree based MSM systems. - if ARCH_MSM -menu "Qualcomm MSM SoC Selection" - depends on ARCH_MSM_DT - -config ARCH_MSM8X60 - bool "Enable support for MSM8X60" - select ARM_GIC - select CPU_V7 - select HAVE_SMP - select MSM_SCM if SMP - select MSM_TIMER - -config ARCH_MSM8960 - bool "Enable support for MSM8960" - select ARM_GIC - select CPU_V7 - select HAVE_SMP - select MSM_SCM if SMP - select MSM_TIMER - -config ARCH_MSM8974 - bool "Enable support for MSM8974" - select ARM_GIC - select CPU_V7 - select HAVE_ARM_ARCH_TIMER - select HAVE_SMP - select MSM_SCM if SMP - -endmenu - choice prompt "Qualcomm MSM SoC Type" default ARCH_MSM7X00A - depends on ARCH_MSM_NODT + depends on ARCH_MSM config ARCH_MSM7X00A bool "MSM7x00A / MSM7x01A" @@ -54,7 +13,7 @@ config ARCH_MSM7X00A select MACH_TROUT if !MACH_HALIBUT select MSM_PROC_COMM select MSM_SMD - select MSM_TIMER + select CLKSRC_QCOM select MSM_SMD_PKG3 config ARCH_MSM7X30 @@ -66,7 +25,7 @@ config ARCH_MSM7X30 select MSM_GPIOMUX select MSM_PROC_COMM select MSM_SMD - select MSM_TIMER + select CLKSRC_QCOM select MSM_VIC config ARCH_QSD8X50 @@ -78,7 +37,7 @@ config ARCH_QSD8X50 select MSM_GPIOMUX select MSM_PROC_COMM select MSM_SMD - select MSM_TIMER + select CLKSRC_QCOM select MSM_VIC endchoice @@ -99,7 +58,7 @@ config MSM_VIC bool menu "Qualcomm MSM Board Type" - depends on ARCH_MSM_NODT + depends on ARCH_MSM config MACH_HALIBUT depends on ARCH_MSM @@ -153,7 +112,4 @@ config MSM_GPIOMUX config MSM_SCM bool -config MSM_TIMER - bool - endif diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile index 8e307a10d3c..27c078a568d 100644 --- a/arch/arm/mach-msm/Makefile +++ b/arch/arm/mach-msm/Makefile @@ -1,4 +1,3 @@ -obj-$(CONFIG_MSM_TIMER) += timer.o obj-$(CONFIG_MSM_PROC_COMM) += clock.o obj-$(CONFIG_MSM_VIC) += irq-vic.o @@ -14,18 +13,11 @@ obj-$(CONFIG_ARCH_QSD8X50) += dma.o io.o obj-$(CONFIG_MSM_SMD) += smd.o smd_debug.o obj-$(CONFIG_MSM_SMD) += last_radio_log.o -obj-$(CONFIG_MSM_SCM) += scm.o scm-boot.o - -CFLAGS_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1) - -obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o -obj-$(CONFIG_SMP) += headsmp.o platsmp.o obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o devices-msm7x00.o obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o board-trout-panel.o devices-msm7x00.o obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o devices-msm7x00.o obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o obj-$(CONFIG_ARCH_QSD8X50) += board-qsd8x50.o devices-qsd8x50.o -obj-$(CONFIG_ARCH_MSM_DT) += board-dt.o obj-$(CONFIG_MSM_GPIOMUX) += gpiomux.o obj-$(CONFIG_ARCH_QSD8X50) += gpiomux-8x50.o diff --git a/arch/arm/mach-msm/common.h b/arch/arm/mach-msm/common.h index 33c7725adae..572479a3c7b 100644 --- a/arch/arm/mach-msm/common.h +++ b/arch/arm/mach-msm/common.h @@ -23,9 +23,6 @@ extern void msm_map_qsd8x50_io(void); extern void __iomem *__msm_ioremap_caller(phys_addr_t phys_addr, size_t size, unsigned int mtype, void *caller); -extern struct smp_operations msm_smp_ops; -extern void msm_cpu_die(unsigned int cpu); - struct msm_mmc_platform_data; extern void msm_add_devices(void); diff --git a/arch/arm/mach-msm/headsmp.S b/arch/arm/mach-msm/headsmp.S deleted file mode 100644 index 6c62c3f82fe..00000000000 --- a/arch/arm/mach-msm/headsmp.S +++ /dev/null @@ -1,39 +0,0 @@ -/* - * linux/arch/arm/mach-realview/headsmp.S - * - * Copyright (c) 2003 ARM Limited - * All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/linkage.h> -#include <linux/init.h> - -/* - * MSM specific entry point for secondary CPUs. This provides - * a "holding pen" into which all secondary cores are held until we're - * ready for them to initialise. - */ -ENTRY(msm_secondary_startup) - mrc p15, 0, r0, c0, c0, 5 - and r0, r0, #15 - adr r4, 1f - ldmia r4, {r5, r6} - sub r4, r4, r5 - add r6, r6, r4 -pen: ldr r7, [r6] - cmp r7, r0 - bne pen - - /* - * we've been released from the holding pen: secondary_stack - * should now contain the SVC stack for this core - */ - b secondary_startup -ENDPROC(msm_secondary_startup) - - .align -1: .long . - .long pen_release diff --git a/arch/arm/mach-msm/hotplug.c b/arch/arm/mach-msm/hotplug.c deleted file mode 100644 index 326a87261f9..00000000000 --- a/arch/arm/mach-msm/hotplug.c +++ /dev/null @@ -1,74 +0,0 @@ -/* - * Copyright (C) 2002 ARM Ltd. - * All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/smp.h> - -#include <asm/smp_plat.h> - -#include "common.h" - -static inline void cpu_enter_lowpower(void) -{ -} - -static inline void cpu_leave_lowpower(void) -{ -} - -static inline void platform_do_lowpower(unsigned int cpu) -{ - /* Just enter wfi for now. TODO: Properly shut off the cpu. */ - for (;;) { - /* - * here's the WFI - */ - asm("wfi" - : - : - : "memory", "cc"); - - if (pen_release == cpu_logical_map(cpu)) { - /* - * OK, proper wakeup, we're done - */ - break; - } - - /* - * getting here, means that we have come out of WFI without - * having been woken up - this shouldn't happen - * - * The trouble is, letting people know about this is not really - * possible, since we are currently running incoherently, and - * therefore cannot safely call printk() or anything else - */ - pr_debug("CPU%u: spurious wakeup call\n", cpu); - } -} - -/* - * platform-specific code to shutdown a CPU - * - * Called with IRQs disabled - */ -void __ref msm_cpu_die(unsigned int cpu) -{ - /* - * we're ready for shutdown now, so do it - */ - cpu_enter_lowpower(); - platform_do_lowpower(cpu); - - /* - * bring this CPU back into the world of cache - * coherency, and then restore interrupts - */ - cpu_leave_lowpower(); -} diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c deleted file mode 100644 index f10a1f58fde..00000000000 --- a/arch/arm/mach-msm/platsmp.c +++ /dev/null @@ -1,161 +0,0 @@ -/* - * Copyright (C) 2002 ARM Ltd. - * All Rights Reserved - * Copyright (c) 2010, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/errno.h> -#include <linux/delay.h> -#include <linux/device.h> -#include <linux/jiffies.h> -#include <linux/smp.h> -#include <linux/io.h> - -#include <asm/cacheflush.h> -#include <asm/cputype.h> -#include <asm/mach-types.h> -#include <asm/smp_plat.h> - -#include "scm-boot.h" -#include "common.h" - -#define VDD_SC1_ARRAY_CLAMP_GFS_CTL 0x15A0 -#define SCSS_CPU1CORE_RESET 0xD80 -#define SCSS_DBG_STATUS_CORE_PWRDUP 0xE64 - -extern void msm_secondary_startup(void); - -static DEFINE_SPINLOCK(boot_lock); - -static inline int get_core_count(void) -{ - /* 1 + the PART[1:0] field of MIDR */ - return ((read_cpuid_id() >> 4) & 3) + 1; -} - -static void msm_secondary_init(unsigned int cpu) -{ - /* - * let the primary processor know we're out of the - * pen, then head off into the C entry point - */ - pen_release = -1; - smp_wmb(); - - /* - * Synchronise with the boot thread. - */ - spin_lock(&boot_lock); - spin_unlock(&boot_lock); -} - -static void prepare_cold_cpu(unsigned int cpu) -{ - int ret; - ret = scm_set_boot_addr(virt_to_phys(msm_secondary_startup), - SCM_FLAG_COLDBOOT_CPU1); - if (ret == 0) { - void __iomem *sc1_base_ptr; - sc1_base_ptr = ioremap_nocache(0x00902000, SZ_4K*2); - if (sc1_base_ptr) { - writel(0, sc1_base_ptr + VDD_SC1_ARRAY_CLAMP_GFS_CTL); - writel(0, sc1_base_ptr + SCSS_CPU1CORE_RESET); - writel(3, sc1_base_ptr + SCSS_DBG_STATUS_CORE_PWRDUP); - iounmap(sc1_base_ptr); - } - } else - printk(KERN_DEBUG "Failed to set secondary core boot " - "address\n"); -} - -static int msm_boot_secondary(unsigned int cpu, struct task_struct *idle) -{ - unsigned long timeout; - static int cold_boot_done; - - /* Only need to bring cpu out of reset this way once */ - if (cold_boot_done == false) { - prepare_cold_cpu(cpu); - cold_boot_done = true; - } - - /* - * set synchronisation state between this boot processor - * and the secondary one - */ - spin_lock(&boot_lock); - - /* - * The secondary processor is waiting to be released from - * the holding pen - release it, then wait for it to flag - * that it has been released by resetting pen_release. - * - * Note that "pen_release" is the hardware CPU ID, whereas - * "cpu" is Linux's internal ID. - */ - pen_release = cpu_logical_map(cpu); - sync_cache_w(&pen_release); - - /* - * Send the secondary CPU a soft interrupt, thereby causing - * the boot monitor to read the system wide flags register, - * and branch to the address found there. - */ - arch_send_wakeup_ipi_mask(cpumask_of(cpu)); - - timeout = jiffies + (1 * HZ); - while (time_before(jiffies, timeout)) { - smp_rmb(); - if (pen_release == -1) - break; - - udelay(10); - } - - /* - * now the secondary core is starting up let it run its - * calibrations, then wait for it to finish - */ - spin_unlock(&boot_lock); - - return pen_release != -1 ? -ENOSYS : 0; -} - -/* - * Initialise the CPU possible map early - this describes the CPUs - * which may be present or become present in the system. The msm8x60 - * does not support the ARM SCU, so just set the possible cpu mask to - * NR_CPUS. - */ -static void __init msm_smp_init_cpus(void) -{ - unsigned int i, ncores = get_core_count(); - - if (ncores > nr_cpu_ids) { - pr_warn("SMP: %u cores greater than maximum (%u), clipping\n", - ncores, nr_cpu_ids); - ncores = nr_cpu_ids; - } - - for (i = 0; i < ncores; i++) - set_cpu_possible(i, true); -} - -static void __init msm_smp_prepare_cpus(unsigned int max_cpus) -{ -} - -struct smp_operations msm_smp_ops __initdata = { - .smp_init_cpus = msm_smp_init_cpus, - .smp_prepare_cpus = msm_smp_prepare_cpus, - .smp_secondary_init = msm_secondary_init, - .smp_boot_secondary = msm_boot_secondary, -#ifdef CONFIG_HOTPLUG_CPU - .cpu_die = msm_cpu_die, -#endif -}; diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c deleted file mode 100644 index fd164498753..00000000000 --- a/arch/arm/mach-msm/timer.c +++ /dev/null @@ -1,333 +0,0 @@ -/* - * - * Copyright (C) 2007 Google, Inc. - * Copyright (c) 2009-2012, The Linux Foundation. All rights reserved. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/clocksource.h> -#include <linux/clockchips.h> -#include <linux/cpu.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <linux/of_irq.h> -#include <linux/sched_clock.h> - -#include <asm/mach/time.h> - -#include "common.h" - -#define TIMER_MATCH_VAL 0x0000 -#define TIMER_COUNT_VAL 0x0004 -#define TIMER_ENABLE 0x0008 -#define TIMER_ENABLE_CLR_ON_MATCH_EN BIT(1) -#define TIMER_ENABLE_EN BIT(0) -#define TIMER_CLEAR 0x000C -#define DGT_CLK_CTL 0x10 -#define DGT_CLK_CTL_DIV_4 0x3 -#define TIMER_STS_GPT0_CLR_PEND BIT(10) - -#define GPT_HZ 32768 - -#define MSM_DGT_SHIFT 5 - -static void __iomem *event_base; -static void __iomem *sts_base; - -static irqreturn_t msm_timer_interrupt(int irq, void *dev_id) -{ - struct clock_event_device *evt = dev_id; - /* Stop the timer tick */ - if (evt->mode == CLOCK_EVT_MODE_ONESHOT) { - u32 ctrl = readl_relaxed(event_base + TIMER_ENABLE); - ctrl &= ~TIMER_ENABLE_EN; - writel_relaxed(ctrl, event_base + TIMER_ENABLE); - } - evt->event_handler(evt); - return IRQ_HANDLED; -} - -static int msm_timer_set_next_event(unsigned long cycles, - struct clock_event_device *evt) -{ - u32 ctrl = readl_relaxed(event_base + TIMER_ENABLE); - - ctrl &= ~TIMER_ENABLE_EN; - writel_relaxed(ctrl, event_base + TIMER_ENABLE); - - writel_relaxed(ctrl, event_base + TIMER_CLEAR); - writel_relaxed(cycles, event_base + TIMER_MATCH_VAL); - - if (sts_base) - while (readl_relaxed(sts_base) & TIMER_STS_GPT0_CLR_PEND) - cpu_relax(); - - writel_relaxed(ctrl | TIMER_ENABLE_EN, event_base + TIMER_ENABLE); - return 0; -} - -static void msm_timer_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) -{ - u32 ctrl; - - ctrl = readl_relaxed(event_base + TIMER_ENABLE); - ctrl &= ~(TIMER_ENABLE_EN | TIMER_ENABLE_CLR_ON_MATCH_EN); - - switch (mode) { - case CLOCK_EVT_MODE_RESUME: - case CLOCK_EVT_MODE_PERIODIC: - break; - case CLOCK_EVT_MODE_ONESHOT: - /* Timer is enabled in set_next_event */ - break; - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_SHUTDOWN: - break; - } - writel_relaxed(ctrl, event_base + TIMER_ENABLE); -} - -static struct clock_event_device __percpu *msm_evt; - -static void __iomem *source_base; - -static notrace cycle_t msm_read_timer_count(struct clocksource *cs) -{ - return readl_relaxed(source_base + TIMER_COUNT_VAL); -} - -static notrace cycle_t msm_read_timer_count_shift(struct clocksource *cs) -{ - /* - * Shift timer count down by a constant due to unreliable lower bits - * on some targets. - */ - return msm_read_timer_count(cs) >> MSM_DGT_SHIFT; -} - -static struct clocksource msm_clocksource = { - .name = "dg_timer", - .rating = 300, - .read = msm_read_timer_count, - .mask = CLOCKSOURCE_MASK(32), - .flags = CLOCK_SOURCE_IS_CONTINUOUS, -}; - -static int msm_timer_irq; -static int msm_timer_has_ppi; - -static int msm_local_timer_setup(struct clock_event_device *evt) -{ - int cpu = smp_processor_id(); - int err; - - evt->irq = msm_timer_irq; - evt->name = "msm_timer"; - evt->features = CLOCK_EVT_FEAT_ONESHOT; - evt->rating = 200; - evt->set_mode = msm_timer_set_mode; - evt->set_next_event = msm_timer_set_next_event; - evt->cpumask = cpumask_of(cpu); - - clockevents_config_and_register(evt, GPT_HZ, 4, 0xffffffff); - - if (msm_timer_has_ppi) { - enable_percpu_irq(evt->irq, IRQ_TYPE_EDGE_RISING); - } else { - err = request_irq(evt->irq, msm_timer_interrupt, - IRQF_TIMER | IRQF_NOBALANCING | - IRQF_TRIGGER_RISING, "gp_timer", evt); - if (err) - pr_err("request_irq failed\n"); - } - - return 0; -} - -static void msm_local_timer_stop(struct clock_event_device *evt) -{ - evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt); - disable_percpu_irq(evt->irq); -} - -static int msm_timer_cpu_notify(struct notifier_block *self, - unsigned long action, void *hcpu) -{ - /* - * Grab cpu pointer in each case to avoid spurious - * preemptible warnings - */ - switch (action & ~CPU_TASKS_FROZEN) { - case CPU_STARTING: - msm_local_timer_setup(this_cpu_ptr(msm_evt)); - break; - case CPU_DYING: - msm_local_timer_stop(this_cpu_ptr(msm_evt)); - break; - } - - return NOTIFY_OK; -} - -static struct notifier_block msm_timer_cpu_nb = { - .notifier_call = msm_timer_cpu_notify, -}; - -static u64 notrace msm_sched_clock_read(void) -{ - return msm_clocksource.read(&msm_clocksource); -} - -static void __init msm_timer_init(u32 dgt_hz, int sched_bits, int irq, - bool percpu) -{ - struct clocksource *cs = &msm_clocksource; - int res = 0; - - msm_timer_irq = irq; - msm_timer_has_ppi = percpu; - - msm_evt = alloc_percpu(struct clock_event_device); - if (!msm_evt) { - pr_err("memory allocation failed for clockevents\n"); - goto err; - } - - if (percpu) - res = request_percpu_irq(irq, msm_timer_interrupt, - "gp_timer", msm_evt); - - if (res) { - pr_err("request_percpu_irq failed\n"); - } else { - res = register_cpu_notifier(&msm_timer_cpu_nb); - if (res) { - free_percpu_irq(irq, msm_evt); - goto err; - } - - /* Immediately configure the timer on the boot CPU */ - msm_local_timer_setup(__this_cpu_ptr(msm_evt)); - } - -err: - writel_relaxed(TIMER_ENABLE_EN, source_base + TIMER_ENABLE); - res = clocksource_register_hz(cs, dgt_hz); - if (res) - pr_err("clocksource_register failed\n"); - sched_clock_register(msm_sched_clock_read, sched_bits, dgt_hz); -} - -#ifdef CONFIG_OF -static void __init msm_dt_timer_init(struct device_node *np) -{ - u32 freq; - int irq; - struct resource res; - u32 percpu_offset; - void __iomem *base; - void __iomem *cpu0_base; - - base = of_iomap(np, 0); - if (!base) { - pr_err("Failed to map event base\n"); - return; - } - - /* We use GPT0 for the clockevent */ - irq = irq_of_parse_and_map(np, 1); - if (irq <= 0) { - pr_err("Can't get irq\n"); - return; - } - - /* We use CPU0's DGT for the clocksource */ - if (of_property_read_u32(np, "cpu-offset", &percpu_offset)) - percpu_offset = 0; - - if (of_address_to_resource(np, 0, &res)) { - pr_err("Failed to parse DGT resource\n"); - return; - } - - cpu0_base = ioremap(res.start + percpu_offset, resource_size(&res)); - if (!cpu0_base) { - pr_err("Failed to map source base\n"); - return; - } - - if (of_property_read_u32(np, "clock-frequency", &freq)) { - pr_err("Unknown frequency\n"); - return; - } - - event_base = base + 0x4; - sts_base = base + 0x88; - source_base = cpu0_base + 0x24; - freq /= 4; - writel_relaxed(DGT_CLK_CTL_DIV_4, source_base + DGT_CLK_CTL); - - msm_timer_init(freq, 32, irq, !!percpu_offset); -} -CLOCKSOURCE_OF_DECLARE(kpss_timer, "qcom,kpss-timer", msm_dt_timer_init); -CLOCKSOURCE_OF_DECLARE(scss_timer, "qcom,scss-timer", msm_dt_timer_init); -#endif - -static int __init msm_timer_map(phys_addr_t addr, u32 event, u32 source, - u32 sts) -{ - void __iomem *base; - - base = ioremap(addr, SZ_256); - if (!base) { - pr_err("Failed to map timer base\n"); - return -ENOMEM; - } - event_base = base + event; - source_base = base + source; - if (sts) - sts_base = base + sts; - - return 0; -} - -void __init msm7x01_timer_init(void) -{ - struct clocksource *cs = &msm_clocksource; - - if (msm_timer_map(0xc0100000, 0x0, 0x10, 0x0)) - return; - cs->read = msm_read_timer_count_shift; - cs->mask = CLOCKSOURCE_MASK((32 - MSM_DGT_SHIFT)); - /* 600 KHz */ - msm_timer_init(19200000 >> MSM_DGT_SHIFT, 32 - MSM_DGT_SHIFT, 7, - false); -} - -void __init msm7x30_timer_init(void) -{ - if (msm_timer_map(0xc0100000, 0x4, 0x24, 0x80)) - return; - msm_timer_init(24576000 / 4, 32, 1, false); -} - -void __init qsd8x50_timer_init(void) -{ - if (msm_timer_map(0xAC100000, 0x0, 0x10, 0x34)) - return; - msm_timer_init(19200000 / 4, 32, 7, false); -} diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c index 75062eff249..e6ac679bece 100644 --- a/arch/arm/mach-mv78xx0/common.c +++ b/arch/arm/mach-mv78xx0/common.c @@ -15,11 +15,11 @@ #include <linux/ata_platform.h> #include <linux/clk-provider.h> #include <linux/ethtool.h> +#include <asm/hardware/cache-feroceon-l2.h> #include <asm/mach/map.h> #include <asm/mach/time.h> #include <mach/mv78xx0.h> #include <mach/bridge-regs.h> -#include <plat/cache-feroceon-l2.h> #include <linux/platform_data/usb-ehci-orion.h> #include <linux/platform_data/mtd-orion_nand.h> #include <plat/time.h> diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index 5e269d7263c..485513cb98c 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -1,16 +1,11 @@ config ARCH_MVEBU - bool "Marvell SOCs with Device Tree support" if ARCH_MULTI_V7 + bool "Marvell Engineering Business Unit (MVEBU) SoCs" if (ARCH_MULTI_V7 || ARCH_MULTI_V5) select ARCH_SUPPORTS_BIG_ENDIAN select CLKSRC_MMIO - select COMMON_CLK - select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP select IRQ_DOMAIN - select MULTI_IRQ_HANDLER select PINCTRL select PLAT_ORION - select SPARSE_IRQ - select CLKDEV_LOOKUP select MVEBU_MBUS select ZONE_DMA if ARM_LPAE select ARCH_REQUIRE_GPIOLIB @@ -19,33 +14,97 @@ config ARCH_MVEBU if ARCH_MVEBU -menu "Marvell SOC with device tree" +menu "Marvell EBU SoC variants" -config MACH_ARMADA_370_XP +config MACH_MVEBU_V7 bool select ARMADA_370_XP_TIMER - select HAVE_SMP select CACHE_L2X0 - select CPU_PJ4B config MACH_ARMADA_370 - bool "Marvell Armada 370 boards" + bool "Marvell Armada 370 boards" if ARCH_MULTI_V7 select ARMADA_370_CLK - select MACH_ARMADA_370_XP + select CPU_PJ4B + select MACH_MVEBU_V7 select PINCTRL_ARMADA_370 help Say 'Y' here if you want your kernel to support boards based on the Marvell Armada 370 SoC with device tree. +config MACH_ARMADA_375 + bool "Marvell Armada 375 boards" if ARCH_MULTI_V7 + select ARM_ERRATA_720789 + select ARM_ERRATA_753970 + select ARM_GIC + select ARMADA_375_CLK + select CPU_V7 + select MACH_MVEBU_V7 + select NEON + select PINCTRL_ARMADA_375 + help + Say 'Y' here if you want your kernel to support boards based + on the Marvell Armada 375 SoC with device tree. + +config MACH_ARMADA_38X + bool "Marvell Armada 380/385 boards" if ARCH_MULTI_V7 + select ARM_ERRATA_720789 + select ARM_ERRATA_753970 + select ARM_GIC + select ARMADA_38X_CLK + select CPU_V7 + select MACH_MVEBU_V7 + select NEON + select PINCTRL_ARMADA_38X + help + Say 'Y' here if you want your kernel to support boards based + on the Marvell Armada 380/385 SoC with device tree. + config MACH_ARMADA_XP - bool "Marvell Armada XP boards" + bool "Marvell Armada XP boards" if ARCH_MULTI_V7 select ARMADA_XP_CLK - select MACH_ARMADA_370_XP + select CPU_PJ4B + select MACH_MVEBU_V7 select PINCTRL_ARMADA_XP help Say 'Y' here if you want your kernel to support boards based on the Marvell Armada XP SoC with device tree. +config MACH_DOVE + bool "Marvell Dove boards" if ARCH_MULTI_V7 + select CACHE_L2X0 + select CPU_PJ4 + select DOVE_CLK + select ORION_IRQCHIP + select ORION_TIMER + select PINCTRL_DOVE + help + Say 'Y' here if you want your kernel to support the + Marvell Dove using flattened device tree. + +config MACH_KIRKWOOD + bool "Marvell Kirkwood boards" if ARCH_MULTI_V5 + select ARCH_HAS_CPUFREQ + select ARCH_REQUIRE_GPIOLIB + select CPU_FEROCEON + select KIRKWOOD_CLK + select OF_IRQ + select ORION_IRQCHIP + select ORION_TIMER + select PCI + select PCI_QUIRKS + select PINCTRL_KIRKWOOD + select USE_OF + help + Say 'Y' here if you want your kernel to support boards based + on the Marvell Kirkwood device tree. + +config MACH_T5325 + bool "HP T5325 thin client" + depends on MACH_KIRKWOOD + help + Say 'Y' here if you want your kernel to support the + HP T5325 Thin client + endmenu endif diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile index 878aebe98dc..a63e43b6b45 100644 --- a/arch/arm/mach-mvebu/Makefile +++ b/arch/arm/mach-mvebu/Makefile @@ -4,7 +4,10 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \ AFLAGS_coherency_ll.o := -Wa,-march=armv7-a obj-y += system-controller.o mvebu-soc-id.o -obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o +obj-$(CONFIG_MACH_MVEBU_V7) += board-v7.o +obj-$(CONFIG_MACH_DOVE) += dove.o obj-$(CONFIG_ARCH_MVEBU) += coherency.o coherency_ll.o pmsu.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o +obj-$(CONFIG_MACH_KIRKWOOD) += kirkwood.o kirkwood-pm.o +obj-$(CONFIG_MACH_T5325) += board-t5325.o diff --git a/arch/arm/mach-mvebu/board-t5325.c b/arch/arm/mach-mvebu/board-t5325.c new file mode 100644 index 00000000000..65ace6db9f2 --- /dev/null +++ b/arch/arm/mach-mvebu/board-t5325.c @@ -0,0 +1,41 @@ +/* + * HP T5325 Board Setup + * + * Copyright (C) 2014 + * + * Andrew Lunn <andrew@lunn.ch> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <sound/alc5623.h> +#include "board.h" + +static struct platform_device hp_t5325_audio_device = { + .name = "t5325-audio", + .id = -1, +}; + +static struct alc5623_platform_data alc5621_data = { + .add_ctrl = 0x3700, + .jack_det_ctrl = 0x4810, +}; + +static struct i2c_board_info i2c_board_info[] __initdata = { + { + I2C_BOARD_INFO("alc5621", 0x1a), + .platform_data = &alc5621_data, + }, +}; + +void __init t5325_init(void) +{ + i2c_register_board_info(0, i2c_board_info, ARRAY_SIZE(i2c_board_info)); + platform_device_register(&hp_t5325_audio_device); +} diff --git a/arch/arm/mach-mvebu/armada-370-xp.c b/arch/arm/mach-mvebu/board-v7.c index f6c9d1d85c1..746134ecdfc 100644 --- a/arch/arm/mach-mvebu/armada-370-xp.c +++ b/arch/arm/mach-mvebu/board-v7.c @@ -31,12 +31,28 @@ #include "coherency.h" #include "mvebu-soc-id.h" -static void __init armada_370_xp_map_io(void) +/* + * Early versions of Armada 375 SoC have a bug where the BootROM + * leaves an external data abort pending. The kernel is hit by this + * data abort as soon as it enters userspace, because it unmasks the + * data aborts at this moment. We register a custom abort handler + * below to ignore the first data abort to work around this + * problem. + */ +static int armada_375_external_abort_wa(unsigned long addr, unsigned int fsr, + struct pt_regs *regs) { - debug_ll_io_init(); + static int ignore_first; + + if (!ignore_first && fsr == 0x1406) { + ignore_first = 1; + return 0; + } + + return 1; } -static void __init armada_370_xp_timer_and_clk_init(void) +static void __init mvebu_timer_and_clk_init(void) { of_clk_init(NULL); clocksource_of_init(); @@ -45,6 +61,10 @@ static void __init armada_370_xp_timer_and_clk_init(void) #ifdef CONFIG_CACHE_L2X0 l2x0_of_init(0, ~0UL); #endif + + if (of_machine_is_compatible("marvell,armada375")) + hook_fault_code(16 + 6, armada_375_external_abort_wa, SIGBUS, 0, + "imprecise external abort"); } static void __init i2c_quirk(void) @@ -75,7 +95,7 @@ static void __init i2c_quirk(void) return; } -static void __init armada_370_xp_dt_init(void) +static void __init mvebu_dt_init(void) { if (of_machine_is_compatible("plathome,openblocks-ax3-4")) i2c_quirk(); @@ -87,11 +107,33 @@ static const char * const armada_370_xp_dt_compat[] = { NULL, }; -DT_MACHINE_START(ARMADA_XP_DT, "Marvell Armada 370/XP (Device Tree)") +DT_MACHINE_START(ARMADA_370_XP_DT, "Marvell Armada 370/XP (Device Tree)") .smp = smp_ops(armada_xp_smp_ops), - .init_machine = armada_370_xp_dt_init, - .map_io = armada_370_xp_map_io, - .init_time = armada_370_xp_timer_and_clk_init, + .init_machine = mvebu_dt_init, + .init_time = mvebu_timer_and_clk_init, .restart = mvebu_restart, .dt_compat = armada_370_xp_dt_compat, MACHINE_END + +static const char * const armada_375_dt_compat[] = { + "marvell,armada375", + NULL, +}; + +DT_MACHINE_START(ARMADA_375_DT, "Marvell Armada 375 (Device Tree)") + .init_time = mvebu_timer_and_clk_init, + .restart = mvebu_restart, + .dt_compat = armada_375_dt_compat, +MACHINE_END + +static const char * const armada_38x_dt_compat[] = { + "marvell,armada380", + "marvell,armada385", + NULL, +}; + +DT_MACHINE_START(ARMADA_38X_DT, "Marvell Armada 380/385 (Device Tree)") + .init_time = mvebu_timer_and_clk_init, + .restart = mvebu_restart, + .dt_compat = armada_38x_dt_compat, +MACHINE_END diff --git a/arch/arm/mach-mvebu/board.h b/arch/arm/mach-mvebu/board.h new file mode 100644 index 00000000000..de7f0a19139 --- /dev/null +++ b/arch/arm/mach-mvebu/board.h @@ -0,0 +1,22 @@ +/* + * Board functions for Marvell System On Chip + * + * Copyright (C) 2014 + * + * Andrew Lunn <andrew@lunn.ch> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ARCH_MVEBU_BOARD_H +#define __ARCH_MVEBU_BOARD_H + +#ifdef CONFIG_MACH_T5325 +void t5325_init(void); +#else +static inline void t5325_init(void) {}; +#endif + +#endif diff --git a/arch/arm/mach-dove/board-dt.c b/arch/arm/mach-mvebu/dove.c index 49fa9abd09d..5e5a4362423 100644 --- a/arch/arm/mach-dove/board-dt.c +++ b/arch/arm/mach-mvebu/dove.c @@ -1,5 +1,5 @@ /* - * arch/arm/mach-dove/board-dt.c + * arch/arm/mach-mvebu/dove.c * * Marvell Dove 88AP510 System On Chip FDT Board * @@ -9,17 +9,14 @@ */ #include <linux/init.h> -#include <linux/clk-provider.h> +#include <linux/mbus.h> #include <linux/of.h> #include <linux/of_platform.h> #include <asm/hardware/cache-tauros2.h> #include <asm/mach/arch.h> -#include <mach/dove.h> -#include <mach/pm.h> -#include <plat/common.h> #include "common.h" -static void __init dove_dt_init(void) +static void __init dove_init(void) { pr_info("Dove 88AP510 SoC\n"); @@ -30,14 +27,13 @@ static void __init dove_dt_init(void) of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } -static const char * const dove_dt_board_compat[] = { +static const char * const dove_dt_compat[] = { "marvell,dove", NULL }; -DT_MACHINE_START(DOVE_DT, "Marvell Dove (Flattened Device Tree)") - .map_io = dove_map_io, - .init_machine = dove_dt_init, - .restart = dove_restart, - .dt_compat = dove_dt_board_compat, +DT_MACHINE_START(DOVE_DT, "Marvell Dove") + .init_machine = dove_init, + .restart = mvebu_restart, + .dt_compat = dove_dt_compat, MACHINE_END diff --git a/arch/arm/mach-mvebu/kirkwood-pm.c b/arch/arm/mach-mvebu/kirkwood-pm.c new file mode 100644 index 00000000000..cbb816f2120 --- /dev/null +++ b/arch/arm/mach-mvebu/kirkwood-pm.c @@ -0,0 +1,76 @@ +/* + * Power Management driver for Marvell Kirkwood SoCs + * + * Copyright (C) 2013 Ezequiel Garcia <ezequiel@free-electrons.com> + * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, + * version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/suspend.h> +#include <linux/io.h> +#include "kirkwood.h" + +static void __iomem *ddr_operation_base; +static void __iomem *memory_pm_ctrl; + +static void kirkwood_low_power(void) +{ + u32 mem_pm_ctrl; + + mem_pm_ctrl = readl(memory_pm_ctrl); + + /* Set peripherals to low-power mode */ + writel_relaxed(~0, memory_pm_ctrl); + + /* Set DDR in self-refresh */ + writel_relaxed(0x7, ddr_operation_base); + + /* + * Set CPU in wait-for-interrupt state. + * This disables the CPU core clocks, + * the array clocks, and also the L2 controller. + */ + cpu_do_idle(); + + writel_relaxed(mem_pm_ctrl, memory_pm_ctrl); +} + +static int kirkwood_suspend_enter(suspend_state_t state) +{ + switch (state) { + case PM_SUSPEND_STANDBY: + kirkwood_low_power(); + break; + default: + return -EINVAL; + } + return 0; +} + +static int kirkwood_pm_valid_standby(suspend_state_t state) +{ + return state == PM_SUSPEND_STANDBY; +} + +static const struct platform_suspend_ops kirkwood_suspend_ops = { + .enter = kirkwood_suspend_enter, + .valid = kirkwood_pm_valid_standby, +}; + +int __init kirkwood_pm_init(void) +{ + ddr_operation_base = ioremap(DDR_OPERATION_BASE, 4); + memory_pm_ctrl = ioremap(MEMORY_PM_CTRL_PHYS, 4); + + suspend_set_ops(&kirkwood_suspend_ops); + return 0; +} diff --git a/arch/arm/mach-mvebu/kirkwood-pm.h b/arch/arm/mach-mvebu/kirkwood-pm.h new file mode 100644 index 00000000000..21e7530f368 --- /dev/null +++ b/arch/arm/mach-mvebu/kirkwood-pm.h @@ -0,0 +1,26 @@ +/* + * Power Management driver for Marvell Kirkwood SoCs + * + * Copyright (C) 2013 Ezequiel Garcia <ezequiel@free-electrons.com> + * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, + * version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __ARCH_KIRKWOOD_PM_H +#define __ARCH_KIRKWOOD_PM_H + +#ifdef CONFIG_PM +void kirkwood_pm_init(void); +#else +static inline void kirkwood_pm_init(void) {}; +#endif + +#endif diff --git a/arch/arm/mach-mvebu/kirkwood.c b/arch/arm/mach-mvebu/kirkwood.c new file mode 100644 index 00000000000..120207fc36f --- /dev/null +++ b/arch/arm/mach-mvebu/kirkwood.c @@ -0,0 +1,199 @@ +/* + * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net> + * + * arch/arm/mach-mvebu/kirkwood.c + * + * Flattened Device Tree board initialization + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/clk.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/mbus.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_net.h> +#include <linux/of_platform.h> +#include <linux/slab.h> +#include <asm/hardware/cache-feroceon-l2.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include "kirkwood.h" +#include "kirkwood-pm.h" +#include "common.h" +#include "board.h" + +static struct resource kirkwood_cpufreq_resources[] = { + [0] = { + .start = CPU_CONTROL_PHYS, + .end = CPU_CONTROL_PHYS + 3, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device kirkwood_cpufreq_device = { + .name = "kirkwood-cpufreq", + .id = -1, + .num_resources = ARRAY_SIZE(kirkwood_cpufreq_resources), + .resource = kirkwood_cpufreq_resources, +}; + +static void __init kirkwood_cpufreq_init(void) +{ + platform_device_register(&kirkwood_cpufreq_device); +} + +static struct resource kirkwood_cpuidle_resource[] = { + { + .flags = IORESOURCE_MEM, + .start = DDR_OPERATION_BASE, + .end = DDR_OPERATION_BASE + 3, + }, +}; + +static struct platform_device kirkwood_cpuidle = { + .name = "kirkwood_cpuidle", + .id = -1, + .resource = kirkwood_cpuidle_resource, + .num_resources = 1, +}; + +static void __init kirkwood_cpuidle_init(void) +{ + platform_device_register(&kirkwood_cpuidle); +} + +#define MV643XX_ETH_MAC_ADDR_LOW 0x0414 +#define MV643XX_ETH_MAC_ADDR_HIGH 0x0418 + +static void __init kirkwood_dt_eth_fixup(void) +{ + struct device_node *np; + + /* + * The ethernet interfaces forget the MAC address assigned by u-boot + * if the clocks are turned off. Usually, u-boot on kirkwood boards + * has no DT support to properly set local-mac-address property. + * As a workaround, we get the MAC address from mv643xx_eth registers + * and update the port device node if no valid MAC address is set. + */ + for_each_compatible_node(np, NULL, "marvell,kirkwood-eth-port") { + struct device_node *pnp = of_get_parent(np); + struct clk *clk; + struct property *pmac; + void __iomem *io; + u8 *macaddr; + u32 reg; + + if (!pnp) + continue; + + /* skip disabled nodes or nodes with valid MAC address*/ + if (!of_device_is_available(pnp) || of_get_mac_address(np)) + goto eth_fixup_skip; + + clk = of_clk_get(pnp, 0); + if (IS_ERR(clk)) + goto eth_fixup_skip; + + io = of_iomap(pnp, 0); + if (!io) + goto eth_fixup_no_map; + + /* ensure port clock is not gated to not hang CPU */ + clk_prepare_enable(clk); + + /* store MAC address register contents in local-mac-address */ + pr_err(FW_INFO "%s: local-mac-address is not set\n", + np->full_name); + + pmac = kzalloc(sizeof(*pmac) + 6, GFP_KERNEL); + if (!pmac) + goto eth_fixup_no_mem; + + pmac->value = pmac + 1; + pmac->length = 6; + pmac->name = kstrdup("local-mac-address", GFP_KERNEL); + if (!pmac->name) { + kfree(pmac); + goto eth_fixup_no_mem; + } + + macaddr = pmac->value; + reg = readl(io + MV643XX_ETH_MAC_ADDR_HIGH); + macaddr[0] = (reg >> 24) & 0xff; + macaddr[1] = (reg >> 16) & 0xff; + macaddr[2] = (reg >> 8) & 0xff; + macaddr[3] = reg & 0xff; + + reg = readl(io + MV643XX_ETH_MAC_ADDR_LOW); + macaddr[4] = (reg >> 8) & 0xff; + macaddr[5] = reg & 0xff; + + of_update_property(np, pmac); + +eth_fixup_no_mem: + iounmap(io); + clk_disable_unprepare(clk); +eth_fixup_no_map: + clk_put(clk); +eth_fixup_skip: + of_node_put(pnp); + } +} + +/* + * Disable propagation of mbus errors to the CPU local bus, as this + * causes mbus errors (which can occur for example for PCI aborts) to + * throw CPU aborts, which we're not set up to deal with. + */ +void kirkwood_disable_mbus_error_propagation(void) +{ + void __iomem *cpu_config; + + cpu_config = ioremap(CPU_CONFIG_PHYS, 4); + writel(readl(cpu_config) & ~CPU_CONFIG_ERROR_PROP, cpu_config); +} + +static struct of_dev_auxdata auxdata[] __initdata = { + OF_DEV_AUXDATA("marvell,kirkwood-audio", 0xf10a0000, + "mvebu-audio", NULL), + { /* sentinel */ } +}; + +static void __init kirkwood_dt_init(void) +{ + kirkwood_disable_mbus_error_propagation(); + + BUG_ON(mvebu_mbus_dt_init()); + +#ifdef CONFIG_CACHE_FEROCEON_L2 + feroceon_of_init(); +#endif + kirkwood_cpufreq_init(); + kirkwood_cpuidle_init(); + + kirkwood_pm_init(); + kirkwood_dt_eth_fixup(); + + if (of_machine_is_compatible("hp,t5325")) + t5325_init(); + + of_platform_populate(NULL, of_default_bus_match_table, auxdata, NULL); +} + +static const char * const kirkwood_dt_board_compat[] = { + "marvell,kirkwood", + NULL +}; + +DT_MACHINE_START(KIRKWOOD_DT, "Marvell Kirkwood (Flattened Device Tree)") + /* Maintainer: Jason Cooper <jason@lakedaemon.net> */ + .init_machine = kirkwood_dt_init, + .restart = mvebu_restart, + .dt_compat = kirkwood_dt_board_compat, +MACHINE_END diff --git a/arch/arm/mach-mvebu/kirkwood.h b/arch/arm/mach-mvebu/kirkwood.h new file mode 100644 index 00000000000..89f3d1f5164 --- /dev/null +++ b/arch/arm/mach-mvebu/kirkwood.h @@ -0,0 +1,22 @@ +/* + * arch/arm/mach-mvebu/kirkwood.h + * + * Generic definitions for Marvell Kirkwood SoC flavors: + * 88F6180, 88F6192 and 88F6281. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#define KIRKWOOD_REGS_PHYS_BASE 0xf1000000 +#define DDR_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x00000) +#define BRIDGE_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x20000) + +#define DDR_OPERATION_BASE (DDR_PHYS_BASE + 0x1418) + +#define CPU_CONFIG_PHYS (BRIDGE_PHYS_BASE + 0x0100) +#define CPU_CONFIG_ERROR_PROP 0x00000004 + +#define CPU_CONTROL_PHYS (BRIDGE_PHYS_BASE + 0x0104) +#define MEMORY_PM_CTRL_PHYS (BRIDGE_PHYS_BASE + 0x0118) diff --git a/arch/arm/mach-mvebu/mvebu-soc-id.c b/arch/arm/mach-mvebu/mvebu-soc-id.c index f3b325f6cbd..f3d4cf53f74 100644 --- a/arch/arm/mach-mvebu/mvebu-soc-id.c +++ b/arch/arm/mach-mvebu/mvebu-soc-id.c @@ -38,6 +38,7 @@ static bool is_id_valid; static const struct of_device_id mvebu_pcie_of_match_table[] = { { .compatible = "marvell,armada-xp-pcie", }, { .compatible = "marvell,armada-370-pcie", }, + { .compatible = "marvell,kirkwood-pcie" }, {}, }; diff --git a/arch/arm/mach-mvebu/system-controller.c b/arch/arm/mach-mvebu/system-controller.c index a7fb89a5b5d..614ba6832ff 100644 --- a/arch/arm/mach-mvebu/system-controller.c +++ b/arch/arm/mach-mvebu/system-controller.c @@ -1,5 +1,5 @@ /* - * System controller support for Armada 370 and XP platforms. + * System controller support for Armada 370, 375 and XP platforms. * * Copyright (C) 2012 Marvell * @@ -11,7 +11,7 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. * - * The Armada 370 and Armada XP SoCs both have a range of + * The Armada 370, 375 and Armada XP SoCs have a range of * miscellaneous registers, that do not belong to a particular device, * but rather provide system-level features. This basic * system-controller driver provides a device tree binding for those @@ -47,6 +47,13 @@ static const struct mvebu_system_controller armada_370_xp_system_controller = { .system_soft_reset = 0x1, }; +static const struct mvebu_system_controller armada_375_system_controller = { + .rstoutn_mask_offset = 0x54, + .system_soft_reset_offset = 0x58, + .rstoutn_mask_reset_out_en = 0x1, + .system_soft_reset = 0x1, +}; + static const struct mvebu_system_controller orion_system_controller = { .rstoutn_mask_offset = 0x108, .system_soft_reset_offset = 0x10c, @@ -54,13 +61,16 @@ static const struct mvebu_system_controller orion_system_controller = { .system_soft_reset = 0x1, }; -static struct of_device_id of_system_controller_table[] = { +static const struct of_device_id of_system_controller_table[] = { { .compatible = "marvell,orion-system-controller", .data = (void *) &orion_system_controller, }, { .compatible = "marvell,armada-370-xp-system-controller", .data = (void *) &armada_370_xp_system_controller, + }, { + .compatible = "marvell,armada-375-system-controller", + .data = (void *) &armada_375_system_controller, }, { /* end of list */ }, }; @@ -90,13 +100,12 @@ void mvebu_restart(enum reboot_mode mode, const char *cmd) static int __init mvebu_system_controller_init(void) { + const struct of_device_id *match; struct device_node *np; - np = of_find_matching_node(NULL, of_system_controller_table); + np = of_find_matching_node_and_match(NULL, of_system_controller_table, + &match); if (np) { - const struct of_device_id *match = - of_match_node(of_system_controller_table, np); - BUG_ON(!match); system_controller_base = of_iomap(np, 0); mvebu_sc = (struct mvebu_system_controller *)match->data; of_node_put(np); diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig index 8cde9e05b5d..84794137b17 100644 --- a/arch/arm/mach-mxs/Kconfig +++ b/arch/arm/mach-mxs/Kconfig @@ -16,11 +16,7 @@ config ARCH_MXS bool "Freescale MXS (i.MX23, i.MX28) support" depends on ARCH_MULTI_V5 select ARCH_REQUIRE_GPIOLIB - select CLKDEV_LOOKUP select CLKSRC_MMIO - select CLKSRC_OF - select GENERIC_CLOCKEVENTS - select HAVE_CLK_PREPARE select PINCTRL select SOC_BUS select SOC_IMX23 diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig index 4d42da49753..486d301f43f 100644 --- a/arch/arm/mach-nomadik/Kconfig +++ b/arch/arm/mach-nomadik/Kconfig @@ -6,16 +6,11 @@ config ARCH_NOMADIK select ARM_VIC select CLKSRC_NOMADIK_MTU select CLKSRC_NOMADIK_MTU_SCHED_CLOCK - select CLKSRC_OF - select COMMON_CLK select CPU_ARM926T - select GENERIC_CLOCKEVENTS select MIGHT_HAVE_CACHE_L2X0 select PINCTRL select PINCTRL_NOMADIK select PINCTRL_STN8815 - select SPARSE_IRQ - select USE_OF help Support for the Nomadik platform by ST-Ericsson diff --git a/arch/arm/mach-nspire/Kconfig b/arch/arm/mach-nspire/Kconfig index 59d8f0a7091..bc41f26c1a1 100644 --- a/arch/arm/mach-nspire/Kconfig +++ b/arch/arm/mach-nspire/Kconfig @@ -3,14 +3,9 @@ config ARCH_NSPIRE depends on ARCH_MULTI_V4_V5 depends on MMU select CPU_ARM926T - select COMMON_CLK - select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP - select SPARSE_IRQ select ARM_AMBA select ARM_VIC select ARM_TIMER_SP804 - select USE_OF - select CLKSRC_OF help This enables support for systems using the TI-NSPIRE CPU diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index 91449c5cb70..85089d82198 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -156,6 +156,7 @@ static struct omap_usb_config nokia770_usb_config __initdata = { .register_dev = 1, .hmc_mode = 16, .pins[0] = 6, + .extcon = "tahvo-usb", }; #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 653b489479e..e55ae63bb03 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -6,7 +6,6 @@ config ARCH_OMAP2 depends on ARCH_MULTI_V6 select ARCH_OMAP2PLUS select CPU_V6 - select MULTI_IRQ_HANDLER select SOC_HAS_OMAP2_SDRC config ARCH_OMAP3 @@ -15,8 +14,6 @@ config ARCH_OMAP3 select ARCH_OMAP2PLUS select ARCH_HAS_OPP select ARM_CPU_SUSPEND if PM - select CPU_V7 - select MULTI_IRQ_HANDLER select OMAP_INTERCONNECT select PM_OPP if PM select PM_RUNTIME if CPU_IDLE @@ -33,10 +30,8 @@ config ARCH_OMAP4 select ARM_ERRATA_720789 select ARM_GIC select CACHE_L2X0 - select CPU_V7 select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP - select HAVE_SMP select OMAP_INTERCONNECT select PL310_ERRATA_588369 select PL310_ERRATA_727915 @@ -50,12 +45,11 @@ config SOC_OMAP5 bool "TI OMAP5" depends on ARCH_MULTI_V7 select ARCH_OMAP2PLUS + select ARCH_HAS_OPP select ARM_CPU_SUSPEND if PM select ARM_GIC - select CPU_V7 select HAVE_ARM_SCU if SMP - select HAVE_ARM_TWD if LOCAL_TIMERS - select HAVE_SMP + select HAVE_ARM_TWD if SMP select HAVE_ARM_ARCH_TIMER select ARM_ERRATA_798181 if SMP @@ -63,16 +57,14 @@ config SOC_AM33XX bool "TI AM33XX" depends on ARCH_MULTI_V7 select ARCH_OMAP2PLUS + select ARCH_HAS_OPP select ARM_CPU_SUSPEND if PM - select CPU_V7 - select MULTI_IRQ_HANDLER config SOC_AM43XX bool "TI AM43x" depends on ARCH_MULTI_V7 - select CPU_V7 select ARCH_OMAP2PLUS - select MULTI_IRQ_HANDLER + select ARCH_HAS_OPP select ARM_GIC select MACH_OMAP_GENERIC @@ -80,10 +72,9 @@ config SOC_DRA7XX bool "TI DRA7XX" depends on ARCH_MULTI_V7 select ARCH_OMAP2PLUS + select ARCH_HAS_OPP select ARM_CPU_SUSPEND if PM select ARM_GIC - select CPU_V7 - select HAVE_SMP select HAVE_ARM_ARCH_TIMER config ARCH_OMAP2PLUS @@ -94,17 +85,13 @@ config ARCH_OMAP2PLUS select ARCH_OMAP select ARCH_REQUIRE_GPIOLIB select CLKSRC_MMIO - select COMMON_CLK - select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP select MACH_OMAP_GENERIC select OMAP_DM_TIMER select PINCTRL select PROC_DEVICETREE if PROC_FS select SOC_BUS - select SPARSE_IRQ select TI_PRIV_EDMA - select USE_OF help Systems based on OMAP2, OMAP3, OMAP4 or OMAP5 @@ -165,12 +152,6 @@ config SOC_TI81XX depends on ARCH_OMAP3 default y -config OMAP_PACKAGE_ZAF - bool - -config OMAP_PACKAGE_ZAC - bool - config OMAP_PACKAGE_CBC bool @@ -268,9 +249,6 @@ config MACH_OMAP_3430SDP default y select OMAP_PACKAGE_CBB -config MACH_NOKIA_N800 - bool - config MACH_NOKIA_N810 bool @@ -281,10 +259,8 @@ config MACH_NOKIA_N8X0 bool "Nokia N800/N810" depends on SOC_OMAP2420 default y - select MACH_NOKIA_N800 select MACH_NOKIA_N810 select MACH_NOKIA_N810_WIMAX - select OMAP_PACKAGE_ZAC config MACH_NOKIA_RX51 bool "Nokia N900 (RX-51) phone" diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index e6eec6f72fd..8421f38cf44 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -60,6 +60,7 @@ AFLAGS_sram34xx.o :=-Wa,-march=armv7-a obj-$(CONFIG_SOC_OMAP2420) += omap2-restart.o obj-$(CONFIG_SOC_OMAP2430) += omap2-restart.o obj-$(CONFIG_SOC_AM33XX) += am33xx-restart.o +obj-$(CONFIG_SOC_AM43XX) += omap4-restart.o obj-$(CONFIG_ARCH_OMAP3) += omap3-restart.o obj-$(CONFIG_ARCH_OMAP4) += omap4-restart.o obj-$(CONFIG_SOC_OMAP5) += omap4-restart.o diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 8e3daa11602..bc6013fbb77 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -229,8 +229,9 @@ DT_MACHINE_START(AM43_DT, "Generic AM43 (Flattened Device Tree)") .init_late = am43xx_init_late, .init_irq = omap_gic_of_init, .init_machine = omap_generic_init, - .init_time = omap3_sync32k_timer_init, + .init_time = omap3_gptimer_timer_init, .dt_compat = am43_boards_compat, + .restart = omap44xx_restart, MACHINE_END #endif diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c index 47f9562ca7a..2649ce44584 100644 --- a/arch/arm/mach-omap2/clkt_dpll.c +++ b/arch/arm/mach-omap2/clkt_dpll.c @@ -306,7 +306,7 @@ long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate, ref_rate = __clk_get_rate(dd->clk_ref); clk_name = __clk_get_name(hw->clk); - pr_debug("clock: %s: starting DPLL round_rate, target rate %ld\n", + pr_debug("clock: %s: starting DPLL round_rate, target rate %lu\n", clk_name, target_rate); scaled_rt_rp = target_rate / (ref_rate / DPLL_SCALE_FACTOR); @@ -342,7 +342,7 @@ long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate, if (r == DPLL_MULT_UNDERFLOW) continue; - pr_debug("clock: %s: m = %d: n = %d: new_rate = %ld\n", + pr_debug("clock: %s: m = %d: n = %d: new_rate = %lu\n", clk_name, m, n, new_rate); if (target_rate == new_rate) { @@ -354,7 +354,7 @@ long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate, } if (target_rate != new_rate) { - pr_debug("clock: %s: cannot round to rate %ld\n", + pr_debug("clock: %s: cannot round to rate %lu\n", clk_name, target_rate); return ~0; } diff --git a/arch/arm/mach-omap2/cminst44xx.c b/arch/arm/mach-omap2/cminst44xx.c index 731ca134348..f5c4731b6f0 100644 --- a/arch/arm/mach-omap2/cminst44xx.c +++ b/arch/arm/mach-omap2/cminst44xx.c @@ -254,6 +254,11 @@ void omap4_cminst_clkdm_force_wakeup(u8 part, u16 inst, u16 cdoffs) * */ +void omap4_cminst_clkdm_force_sleep(u8 part, u16 inst, u16 cdoffs) +{ + _clktrctrl_write(OMAP34XX_CLKSTCTRL_FORCE_SLEEP, part, inst, cdoffs); +} + /** * omap4_cminst_wait_module_ready - wait for a module to be in 'func' state * @part: PRCM partition ID that the CM_CLKCTRL register exists in @@ -404,8 +409,17 @@ static int omap4_clkdm_clear_all_wkup_sleep_deps(struct clockdomain *clkdm) static int omap4_clkdm_sleep(struct clockdomain *clkdm) { - omap4_cminst_clkdm_enable_hwsup(clkdm->prcm_partition, - clkdm->cm_inst, clkdm->clkdm_offs); + if (clkdm->flags & CLKDM_CAN_HWSUP) + omap4_cminst_clkdm_enable_hwsup(clkdm->prcm_partition, + clkdm->cm_inst, + clkdm->clkdm_offs); + else if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP) + omap4_cminst_clkdm_force_sleep(clkdm->prcm_partition, + clkdm->cm_inst, + clkdm->clkdm_offs); + else + return -EINVAL; + return 0; } diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c index 3185ced807c..d9bcbf7641b 100644 --- a/arch/arm/mach-omap2/dpll3xxx.c +++ b/arch/arm/mach-omap2/dpll3xxx.c @@ -525,7 +525,7 @@ int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate, * stuff is inherited for free */ - if (!ret) + if (!ret && clk_get_parent(hw->clk) != new_parent) __clk_reparent(hw->clk, new_parent); return 0; diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index d24926e6340..ab43755364f 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -1339,7 +1339,7 @@ static void __maybe_unused gpmc_read_timings_dt(struct device_node *np, of_property_read_bool(np, "gpmc,time-para-granularity"); } -#ifdef CONFIG_MTD_NAND +#if IS_ENABLED(CONFIG_MTD_NAND) static const char * const nand_xfer_types[] = { [NAND_OMAP_PREFETCH_POLLED] = "prefetch-polled", @@ -1429,7 +1429,7 @@ static int gpmc_probe_nand_child(struct platform_device *pdev, } #endif -#ifdef CONFIG_MTD_ONENAND +#if IS_ENABLED(CONFIG_MTD_ONENAND) static int gpmc_probe_onenand_child(struct platform_device *pdev, struct device_node *child) { diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 9428c5f9d4f..157412e4273 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -465,8 +465,18 @@ void __init omap3xxx_check_revision(void) } break; case 0xb98c: - omap_revision = AM437X_REV_ES1_0; - cpu_rev = "1.0"; + switch (rev) { + case 0: + omap_revision = AM437X_REV_ES1_0; + cpu_rev = "1.0"; + break; + case 1: + /* FALLTHROUGH */ + default: + omap_revision = AM437X_REV_ES1_1; + cpu_rev = "1.1"; + break; + } break; case 0xb8f2: switch (rev) { @@ -657,6 +667,8 @@ static const char * __init omap_get_family(void) return kasprintf(GFP_KERNEL, "OMAP4"); else if (soc_is_omap54xx()) return kasprintf(GFP_KERNEL, "OMAP5"); + else if (soc_is_am43xx()) + return kasprintf(GFP_KERNEL, "AM43xx"); else return kasprintf(GFP_KERNEL, "Unknown"); } diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index d408b15b4fb..f14f9ac2dca 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -179,15 +179,6 @@ static struct map_desc omap34xx_io_desc[] __initdata = { .length = L4_EMU_34XX_SIZE, .type = MT_DEVICE }, -#if defined(CONFIG_DEBUG_LL) && \ - (defined(CONFIG_MACH_OMAP_ZOOM2) || defined(CONFIG_MACH_OMAP_ZOOM3)) - { - .virtual = ZOOM_UART_VIRT, - .pfn = __phys_to_pfn(ZOOM_UART_BASE), - .length = SZ_1M, - .type = MT_DEVICE - }, -#endif }; #endif @@ -613,6 +604,7 @@ void __init am43xx_init_early(void) omap_prm_base_init(); omap_cm_base_init(); omap3xxx_check_revision(); + am33xx_check_features(); am43xx_powerdomains_init(); am43xx_clockdomains_init(); am43xx_hwmod_init(); diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h index a722330d4d5..d121fb6df4e 100644 --- a/arch/arm/mach-omap2/mux.h +++ b/arch/arm/mach-omap2/mux.h @@ -63,9 +63,6 @@ #define OMAP_PACKAGE_CUS 5 /* 423-pin 0.65 */ #define OMAP_PACKAGE_CBB 4 /* 515-pin 0.40 0.50 */ #define OMAP_PACKAGE_CBC 3 /* 515-pin 0.50 0.65 */ -#define OMAP_PACKAGE_ZAC 2 /* 24xx 447-pin POP */ -#define OMAP_PACKAGE_ZAF 1 /* 2420 447-pin SIP */ - #define OMAP_MUX_NR_MODES 8 /* Available modes */ #define OMAP_MUX_NR_SIDES 2 /* Bottom & top */ diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c index 9002fca7669..5c2cc8083fd 100644 --- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c @@ -719,6 +719,7 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = { &am33xx_l4_ls__uart4, &am33xx_l4_ls__uart5, &am33xx_l4_ls__uart6, + &am33xx_l4_ls__spinlock, &am33xx_l4_ls__elm, &am33xx_l4_ls__epwmss0, &am33xx_epwmss0__ecap0, diff --git a/arch/arm/mach-omap2/prminst44xx.c b/arch/arm/mach-omap2/prminst44xx.c index 6334b96b409..f5989f2af89 100644 --- a/arch/arm/mach-omap2/prminst44xx.c +++ b/arch/arm/mach-omap2/prminst44xx.c @@ -25,6 +25,7 @@ #include "prminst44xx.h" #include "prm-regbits-44xx.h" #include "prcm44xx.h" +#include "prcm43xx.h" #include "prcm_mpu44xx.h" #include "soc.h" @@ -176,6 +177,8 @@ void omap4_prminst_global_warm_sw_reset(void) dev_inst = OMAP54XX_PRM_DEVICE_INST; else if (soc_is_dra7xx()) dev_inst = DRA7XX_PRM_DEVICE_INST; + else if (soc_is_am43xx()) + dev_inst = AM43XX_PRM_DEVICE_INST; else return; diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h index 076bd90a6ce..30abcc8b20e 100644 --- a/arch/arm/mach-omap2/soc.h +++ b/arch/arm/mach-omap2/soc.h @@ -438,7 +438,8 @@ IS_OMAP_TYPE(3430, 0x3430) #define AM335X_REV_ES2_1 (AM335X_CLASS | (0x2 << 8)) #define AM437X_CLASS 0x43700000 -#define AM437X_REV_ES1_0 AM437X_CLASS +#define AM437X_REV_ES1_0 (AM437X_CLASS | (0x10 << 8)) +#define AM437X_REV_ES1_1 (AM437X_CLASS | (0x11 << 8)) #define OMAP443X_CLASS 0x44300044 #define OMAP4430_REV_ES1_0 (OMAP443X_CLASS | (0x10 << 8)) diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 74044aaf438..b62de9f9d05 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -604,7 +604,8 @@ OMAP_SYS_32K_TIMER_INIT(3_secure, 12, "secure_32k_fck", "ti,timer-secure", 2, "timer_sys_ck", NULL); #endif /* CONFIG_ARCH_OMAP3 */ -#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM33XX) +#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM33XX) || \ + defined(CONFIG_SOC_AM43XX) OMAP_SYS_GP_TIMER_INIT(3, 2, "timer_sys_ck", NULL, 1, "timer_sys_ck", "ti,timer-alwon"); #endif diff --git a/arch/arm/mach-picoxcell/Kconfig b/arch/arm/mach-picoxcell/Kconfig index b1022f4315f..eca9eb1c593 100644 --- a/arch/arm/mach-picoxcell/Kconfig +++ b/arch/arm/mach-picoxcell/Kconfig @@ -1,12 +1,7 @@ config ARCH_PICOXCELL bool "Picochip PicoXcell" if ARCH_MULTI_V6 select ARCH_REQUIRE_GPIOLIB - select ARM_PATCH_PHYS_VIRT select ARM_VIC - select CPU_V6K select DW_APB_TIMER_OF - select GENERIC_CLOCKEVENTS select HAVE_TCM select NO_IOPORT - select SPARSE_IRQ - select USE_OF diff --git a/arch/arm/mach-prima2/Kconfig b/arch/arm/mach-prima2/Kconfig index 6988b117fc1..2c726b4f935 100644 --- a/arch/arm/mach-prima2/Kconfig +++ b/arch/arm/mach-prima2/Kconfig @@ -1,9 +1,7 @@ config ARCH_SIRF bool "CSR SiRF" if ARCH_MULTI_V7 select ARCH_REQUIRE_GPIOLIB - select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP - select MIGHT_HAVE_CACHE_L2X0 select NO_IOPORT select PINCTRL select PINCTRL_SIRF @@ -17,7 +15,6 @@ menu "CSR SiRF atlas6/primaII/Marco/Polo Specific Features" config ARCH_ATLAS6 bool "CSR SiRFSoC ATLAS6 ARM Cortex A9 Platform" default y - select CPU_V7 select SIRF_IRQ help Support for CSR SiRFSoC ARM Cortex A9 Platform @@ -25,7 +22,6 @@ config ARCH_ATLAS6 config ARCH_PRIMA2 bool "CSR SiRFSoC PRIMA2 ARM Cortex A9 Platform" default y - select CPU_V7 select SIRF_IRQ select ZONE_DMA help @@ -35,9 +31,7 @@ config ARCH_MARCO bool "CSR SiRFSoC MARCO ARM Cortex A9 Platform" default y select ARM_GIC - select CPU_V7 select HAVE_ARM_SCU if SMP - select HAVE_SMP select SMP_ON_UP if SMP help Support for CSR SiRFSoC ARM Cortex A9 Platform diff --git a/arch/arm/mach-pxa/am300epd.c b/arch/arm/mach-pxa/am300epd.c index c9f309ae88c..8b90c4f2d43 100644 --- a/arch/arm/mach-pxa/am300epd.c +++ b/arch/arm/mach-pxa/am300epd.c @@ -30,6 +30,7 @@ #include <mach/gumstix.h> #include <mach/mfp-pxa25x.h> +#include <mach/irqs.h> #include <linux/platform_data/video-pxafb.h> #include "generic.h" diff --git a/arch/arm/mach-pxa/include/mach/balloon3.h b/arch/arm/mach-pxa/include/mach/balloon3.h index 954641e6c8b..1b0825911e6 100644 --- a/arch/arm/mach-pxa/include/mach/balloon3.h +++ b/arch/arm/mach-pxa/include/mach/balloon3.h @@ -14,6 +14,8 @@ #ifndef ASM_ARCH_BALLOON3_H #define ASM_ARCH_BALLOON3_H +#include "irqs.h" /* PXA_NR_BUILTIN_GPIO */ + enum balloon3_features { BALLOON3_FEATURE_OHCI, BALLOON3_FEATURE_MMC, diff --git a/arch/arm/mach-pxa/include/mach/corgi.h b/arch/arm/mach-pxa/include/mach/corgi.h index f3c3493b468..c030d955bbd 100644 --- a/arch/arm/mach-pxa/include/mach/corgi.h +++ b/arch/arm/mach-pxa/include/mach/corgi.h @@ -13,6 +13,7 @@ #ifndef __ASM_ARCH_CORGI_H #define __ASM_ARCH_CORGI_H 1 +#include "irqs.h" /* PXA_NR_BUILTIN_GPIO */ /* * Corgi (Non Standard) GPIO Definitions diff --git a/arch/arm/mach-pxa/include/mach/csb726.h b/arch/arm/mach-pxa/include/mach/csb726.h index 2628e7b7211..00cfbbbf73f 100644 --- a/arch/arm/mach-pxa/include/mach/csb726.h +++ b/arch/arm/mach-pxa/include/mach/csb726.h @@ -11,6 +11,8 @@ #ifndef CSB726_H #define CSB726_H +#include "irqs.h" /* PXA_GPIO_TO_IRQ */ + #define CSB726_GPIO_IRQ_LAN 52 #define CSB726_GPIO_IRQ_SM501 53 #define CSB726_GPIO_MMC_DETECT 100 diff --git a/arch/arm/mach-pxa/include/mach/gumstix.h b/arch/arm/mach-pxa/include/mach/gumstix.h index dba14b6503a..f7df27bbb42 100644 --- a/arch/arm/mach-pxa/include/mach/gumstix.h +++ b/arch/arm/mach-pxa/include/mach/gumstix.h @@ -6,6 +6,7 @@ * published by the Free Software Foundation. */ +#include "irqs.h" /* PXA_GPIO_TO_IRQ */ /* BTRESET - Reset line to Bluetooth module, active low signal. */ #define GPIO_GUMSTIX_BTRESET 7 diff --git a/arch/arm/mach-pxa/include/mach/idp.h b/arch/arm/mach-pxa/include/mach/idp.h index 22a96f87232..7e63f468027 100644 --- a/arch/arm/mach-pxa/include/mach/idp.h +++ b/arch/arm/mach-pxa/include/mach/idp.h @@ -23,6 +23,7 @@ * IDP hardware. */ +#include "irqs.h" /* PXA_GPIO_TO_IRQ */ #define IDP_FLASH_PHYS (PXA_CS0_PHYS) #define IDP_ALT_FLASH_PHYS (PXA_CS1_PHYS) diff --git a/arch/arm/mach-pxa/include/mach/palmld.h b/arch/arm/mach-pxa/include/mach/palmld.h index 2c447133657..b184f296023 100644 --- a/arch/arm/mach-pxa/include/mach/palmld.h +++ b/arch/arm/mach-pxa/include/mach/palmld.h @@ -13,6 +13,8 @@ #ifndef _INCLUDE_PALMLD_H_ #define _INCLUDE_PALMLD_H_ +#include "irqs.h" /* PXA_GPIO_TO_IRQ */ + /** HERE ARE GPIOs **/ /* GPIOs */ diff --git a/arch/arm/mach-pxa/include/mach/palmt5.h b/arch/arm/mach-pxa/include/mach/palmt5.h index 0bd4f036c72..e342c592140 100644 --- a/arch/arm/mach-pxa/include/mach/palmt5.h +++ b/arch/arm/mach-pxa/include/mach/palmt5.h @@ -15,6 +15,8 @@ #ifndef _INCLUDE_PALMT5_H_ #define _INCLUDE_PALMT5_H_ +#include "irqs.h" /* PXA_GPIO_TO_IRQ */ + /** HERE ARE GPIOs **/ /* GPIOs */ diff --git a/arch/arm/mach-pxa/include/mach/palmtc.h b/arch/arm/mach-pxa/include/mach/palmtc.h index c383a21680b..81c727b3cfd 100644 --- a/arch/arm/mach-pxa/include/mach/palmtc.h +++ b/arch/arm/mach-pxa/include/mach/palmtc.h @@ -16,6 +16,8 @@ #ifndef _INCLUDE_PALMTC_H_ #define _INCLUDE_PALMTC_H_ +#include "irqs.h" /* PXA_GPIO_TO_IRQ */ + /** HERE ARE GPIOs **/ /* GPIOs */ diff --git a/arch/arm/mach-pxa/include/mach/palmtx.h b/arch/arm/mach-pxa/include/mach/palmtx.h index f2e53038025..92bc1f05300 100644 --- a/arch/arm/mach-pxa/include/mach/palmtx.h +++ b/arch/arm/mach-pxa/include/mach/palmtx.h @@ -16,6 +16,8 @@ #ifndef _INCLUDE_PALMTX_H_ #define _INCLUDE_PALMTX_H_ +#include "irqs.h" /* PXA_GPIO_TO_IRQ */ + /** HERE ARE GPIOs **/ /* GPIOs */ diff --git a/arch/arm/mach-pxa/include/mach/pcm027.h b/arch/arm/mach-pxa/include/mach/pcm027.h index 6bf28de228b..86ebd7b6c96 100644 --- a/arch/arm/mach-pxa/include/mach/pcm027.h +++ b/arch/arm/mach-pxa/include/mach/pcm027.h @@ -23,6 +23,8 @@ * Definitions of CPU card resources only */ +#include "irqs.h" /* PXA_GPIO_TO_IRQ */ + /* phyCORE-PXA270 (PCM027) Interrupts */ #define PCM027_IRQ(x) (IRQ_BOARD_START + (x)) #define PCM027_BTDET_IRQ PCM027_IRQ(0) diff --git a/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h b/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h index 0260aaa2fc1..7e544c14967 100644 --- a/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h +++ b/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h @@ -20,6 +20,7 @@ */ #include <mach/pcm027.h> +#include "irqs.h" /* PXA_GPIO_TO_IRQ */ /* * definitions relevant only when the PCM-990 diff --git a/arch/arm/mach-pxa/include/mach/poodle.h b/arch/arm/mach-pxa/include/mach/poodle.h index f32ff75dcca..b56b19351a0 100644 --- a/arch/arm/mach-pxa/include/mach/poodle.h +++ b/arch/arm/mach-pxa/include/mach/poodle.h @@ -15,6 +15,8 @@ #ifndef __ASM_ARCH_POODLE_H #define __ASM_ARCH_POODLE_H 1 +#include "irqs.h" /* PXA_GPIO_TO_IRQ */ + /* * GPIOs */ diff --git a/arch/arm/mach-pxa/include/mach/spitz.h b/arch/arm/mach-pxa/include/mach/spitz.h index 0bfe6507c95..25c9f62e46a 100644 --- a/arch/arm/mach-pxa/include/mach/spitz.h +++ b/arch/arm/mach-pxa/include/mach/spitz.h @@ -15,8 +15,8 @@ #define __ASM_ARCH_SPITZ_H 1 #endif +#include "irqs.h" /* PXA_NR_BUILTIN_GPIO, PXA_GPIO_TO_IRQ */ #include <linux/fb.h> -#include <linux/gpio.h> /* Spitz/Akita GPIOs */ diff --git a/arch/arm/mach-pxa/include/mach/tosa.h b/arch/arm/mach-pxa/include/mach/tosa.h index 2bb0e862598..0497d95cef2 100644 --- a/arch/arm/mach-pxa/include/mach/tosa.h +++ b/arch/arm/mach-pxa/include/mach/tosa.h @@ -13,6 +13,8 @@ #ifndef _ASM_ARCH_TOSA_H_ #define _ASM_ARCH_TOSA_H_ 1 +#include "irqs.h" /* PXA_NR_BUILTIN_GPIO */ + /* TOSA Chip selects */ #define TOSA_LCDC_PHYS PXA_CS4_PHYS /* Internel Scoop */ diff --git a/arch/arm/mach-pxa/include/mach/trizeps4.h b/arch/arm/mach-pxa/include/mach/trizeps4.h index d2ca01053f6..ae3ca013afa 100644 --- a/arch/arm/mach-pxa/include/mach/trizeps4.h +++ b/arch/arm/mach-pxa/include/mach/trizeps4.h @@ -10,6 +10,8 @@ #ifndef _TRIPEPS4_H_ #define _TRIPEPS4_H_ +#include "irqs.h" /* PXA_GPIO_TO_IRQ */ + /* physical memory regions */ #define TRIZEPS4_FLASH_PHYS (PXA_CS0_PHYS) /* Flash region */ #define TRIZEPS4_DISK_PHYS (PXA_CS1_PHYS) /* Disk On Chip region */ diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index f70583fee59..29997bde277 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -38,6 +38,7 @@ #include <linux/mtd/physmap.h> #include <linux/usb/gpio_vbus.h> #include <linux/reboot.h> +#include <linux/regulator/fixed.h> #include <linux/regulator/max1586.h> #include <linux/slab.h> #include <linux/i2c/pxa-i2c.h> @@ -714,6 +715,10 @@ static struct gpio global_gpios[] = { { GPIO56_MT9M111_nOE, GPIOF_OUT_INIT_LOW, "Camera nOE" }, }; +static struct regulator_consumer_supply fixed_5v0_consumers[] = { + REGULATOR_SUPPLY("power", "pwm-backlight"), +}; + static void __init mioa701_machine_init(void) { int rc; @@ -753,6 +758,10 @@ static void __init mioa701_machine_init(void) pxa_set_i2c_info(&i2c_pdata); pxa27x_set_i2c_power_info(NULL); pxa_set_camera_info(&mioa701_pxacamera_platform_data); + + regulator_register_always_on(0, "fixed-5.0V", fixed_5v0_consumers, + ARRAY_SIZE(fixed_5v0_consumers), + 5000000); } static void mioa701_machine_exit(void) diff --git a/arch/arm/mach-qcom/Kconfig b/arch/arm/mach-qcom/Kconfig new file mode 100644 index 00000000000..a028be23433 --- /dev/null +++ b/arch/arm/mach-qcom/Kconfig @@ -0,0 +1,33 @@ +config ARCH_QCOM + bool "Qualcomm Support" if ARCH_MULTI_V7 + select ARCH_REQUIRE_GPIOLIB + select ARM_GIC + select CLKSRC_OF + select GENERIC_CLOCKEVENTS + select HAVE_SMP + select QCOM_SCM if SMP + help + Support for Qualcomm's devicetree based systems. + +if ARCH_QCOM + +menu "Qualcomm SoC Selection" + +config ARCH_MSM8X60 + bool "Enable support for MSM8X60" + select CLKSRC_QCOM + +config ARCH_MSM8960 + bool "Enable support for MSM8960" + select CLKSRC_QCOM + +config ARCH_MSM8974 + bool "Enable support for MSM8974" + select HAVE_ARM_ARCH_TIMER + +endmenu + +config QCOM_SCM + bool + +endif diff --git a/arch/arm/mach-qcom/Makefile b/arch/arm/mach-qcom/Makefile new file mode 100644 index 00000000000..8f756ae1ae3 --- /dev/null +++ b/arch/arm/mach-qcom/Makefile @@ -0,0 +1,5 @@ +obj-y := board.o +obj-$(CONFIG_SMP) += platsmp.o +obj-$(CONFIG_QCOM_SCM) += scm.o scm-boot.o + +CFLAGS_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1) diff --git a/arch/arm/mach-msm/board-dt.c b/arch/arm/mach-qcom/board.c index 1f11d93e700..bae617ef0b3 100644 --- a/arch/arm/mach-msm/board-dt.c +++ b/arch/arm/mach-qcom/board.c @@ -1,4 +1,4 @@ -/* Copyright (c) 2010-2012,2013 The Linux Foundation. All rights reserved. +/* Copyright (c) 2010-2014 The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and @@ -11,31 +11,16 @@ */ #include <linux/init.h> -#include <linux/of.h> -#include <linux/of_platform.h> #include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include "common.h" - -static const char * const msm_dt_match[] __initconst = { - "qcom,msm8660-fluid", +static const char * const qcom_dt_match[] __initconst = { "qcom,msm8660-surf", "qcom,msm8960-cdp", - NULL -}; - -static const char * const apq8074_dt_match[] __initconst = { "qcom,apq8074-dragonboard", NULL }; -DT_MACHINE_START(MSM_DT, "Qualcomm MSM (Flattened Device Tree)") - .smp = smp_ops(msm_smp_ops), - .dt_compat = msm_dt_match, -MACHINE_END - -DT_MACHINE_START(APQ_DT, "Qualcomm MSM (Flattened Device Tree)") - .dt_compat = apq8074_dt_match, +DT_MACHINE_START(QCOM_DT, "Qualcomm (Flattened Device Tree)") + .dt_compat = qcom_dt_match, MACHINE_END diff --git a/arch/arm/mach-qcom/platsmp.c b/arch/arm/mach-qcom/platsmp.c new file mode 100644 index 00000000000..d6908569eca --- /dev/null +++ b/arch/arm/mach-qcom/platsmp.c @@ -0,0 +1,378 @@ +/* + * Copyright (C) 2002 ARM Ltd. + * All Rights Reserved + * Copyright (c) 2010, Code Aurora Forum. All rights reserved. + * Copyright (c) 2014 The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/smp.h> +#include <linux/io.h> + +#include <asm/smp_plat.h> + +#include "scm-boot.h" + +#define VDD_SC1_ARRAY_CLAMP_GFS_CTL 0x35a0 +#define SCSS_CPU1CORE_RESET 0x2d80 +#define SCSS_DBG_STATUS_CORE_PWRDUP 0x2e64 + +#define APCS_CPU_PWR_CTL 0x04 +#define PLL_CLAMP BIT(8) +#define CORE_PWRD_UP BIT(7) +#define COREPOR_RST BIT(5) +#define CORE_RST BIT(4) +#define L2DT_SLP BIT(3) +#define CLAMP BIT(0) + +#define APC_PWR_GATE_CTL 0x14 +#define BHS_CNT_SHIFT 24 +#define LDO_PWR_DWN_SHIFT 16 +#define LDO_BYP_SHIFT 8 +#define BHS_SEG_SHIFT 1 +#define BHS_EN BIT(0) + +#define APCS_SAW2_VCTL 0x14 +#define APCS_SAW2_2_VCTL 0x1c + +extern void secondary_startup(void); + +static DEFINE_SPINLOCK(boot_lock); + +#ifdef CONFIG_HOTPLUG_CPU +static void __ref qcom_cpu_die(unsigned int cpu) +{ + wfi(); +} +#endif + +static void qcom_secondary_init(unsigned int cpu) +{ + /* + * Synchronise with the boot thread. + */ + spin_lock(&boot_lock); + spin_unlock(&boot_lock); +} + +static int scss_release_secondary(unsigned int cpu) +{ + struct device_node *node; + void __iomem *base; + + node = of_find_compatible_node(NULL, NULL, "qcom,gcc-msm8660"); + if (!node) { + pr_err("%s: can't find node\n", __func__); + return -ENXIO; + } + + base = of_iomap(node, 0); + of_node_put(node); + if (!base) + return -ENOMEM; + + writel_relaxed(0, base + VDD_SC1_ARRAY_CLAMP_GFS_CTL); + writel_relaxed(0, base + SCSS_CPU1CORE_RESET); + writel_relaxed(3, base + SCSS_DBG_STATUS_CORE_PWRDUP); + mb(); + iounmap(base); + + return 0; +} + +static int kpssv1_release_secondary(unsigned int cpu) +{ + int ret = 0; + void __iomem *reg, *saw_reg; + struct device_node *cpu_node, *acc_node, *saw_node; + u32 val; + + cpu_node = of_get_cpu_node(cpu, NULL); + if (!cpu_node) + return -ENODEV; + + acc_node = of_parse_phandle(cpu_node, "qcom,acc", 0); + if (!acc_node) { + ret = -ENODEV; + goto out_acc; + } + + saw_node = of_parse_phandle(cpu_node, "qcom,saw", 0); + if (!saw_node) { + ret = -ENODEV; + goto out_saw; + } + + reg = of_iomap(acc_node, 0); + if (!reg) { + ret = -ENOMEM; + goto out_acc_map; + } + + saw_reg = of_iomap(saw_node, 0); + if (!saw_reg) { + ret = -ENOMEM; + goto out_saw_map; + } + + /* Turn on CPU rail */ + writel_relaxed(0xA4, saw_reg + APCS_SAW2_VCTL); + mb(); + udelay(512); + + /* Krait bring-up sequence */ + val = PLL_CLAMP | L2DT_SLP | CLAMP; + writel_relaxed(val, reg + APCS_CPU_PWR_CTL); + val &= ~L2DT_SLP; + writel_relaxed(val, reg + APCS_CPU_PWR_CTL); + mb(); + ndelay(300); + + val |= COREPOR_RST; + writel_relaxed(val, reg + APCS_CPU_PWR_CTL); + mb(); + udelay(2); + + val &= ~CLAMP; + writel_relaxed(val, reg + APCS_CPU_PWR_CTL); + mb(); + udelay(2); + + val &= ~COREPOR_RST; + writel_relaxed(val, reg + APCS_CPU_PWR_CTL); + mb(); + udelay(100); + + val |= CORE_PWRD_UP; + writel_relaxed(val, reg + APCS_CPU_PWR_CTL); + mb(); + + iounmap(saw_reg); +out_saw_map: + iounmap(reg); +out_acc_map: + of_node_put(saw_node); +out_saw: + of_node_put(acc_node); +out_acc: + of_node_put(cpu_node); + return ret; +} + +static int kpssv2_release_secondary(unsigned int cpu) +{ + void __iomem *reg; + struct device_node *cpu_node, *l2_node, *acc_node, *saw_node; + void __iomem *l2_saw_base; + unsigned reg_val; + int ret; + + cpu_node = of_get_cpu_node(cpu, NULL); + if (!cpu_node) + return -ENODEV; + + acc_node = of_parse_phandle(cpu_node, "qcom,acc", 0); + if (!acc_node) { + ret = -ENODEV; + goto out_acc; + } + + l2_node = of_parse_phandle(cpu_node, "next-level-cache", 0); + if (!l2_node) { + ret = -ENODEV; + goto out_l2; + } + + saw_node = of_parse_phandle(l2_node, "qcom,saw", 0); + if (!saw_node) { + ret = -ENODEV; + goto out_saw; + } + + reg = of_iomap(acc_node, 0); + if (!reg) { + ret = -ENOMEM; + goto out_map; + } + + l2_saw_base = of_iomap(saw_node, 0); + if (!l2_saw_base) { + ret = -ENOMEM; + goto out_saw_map; + } + + /* Turn on the BHS, turn off LDO Bypass and power down LDO */ + reg_val = (64 << BHS_CNT_SHIFT) | (0x3f << LDO_PWR_DWN_SHIFT) | BHS_EN; + writel_relaxed(reg_val, reg + APC_PWR_GATE_CTL); + mb(); + /* wait for the BHS to settle */ + udelay(1); + + /* Turn on BHS segments */ + reg_val |= 0x3f << BHS_SEG_SHIFT; + writel_relaxed(reg_val, reg + APC_PWR_GATE_CTL); + mb(); + /* wait for the BHS to settle */ + udelay(1); + + /* Finally turn on the bypass so that BHS supplies power */ + reg_val |= 0x3f << LDO_BYP_SHIFT; + writel_relaxed(reg_val, reg + APC_PWR_GATE_CTL); + + /* enable max phases */ + writel_relaxed(0x10003, l2_saw_base + APCS_SAW2_2_VCTL); + mb(); + udelay(50); + + reg_val = COREPOR_RST | CLAMP; + writel_relaxed(reg_val, reg + APCS_CPU_PWR_CTL); + mb(); + udelay(2); + + reg_val &= ~CLAMP; + writel_relaxed(reg_val, reg + APCS_CPU_PWR_CTL); + mb(); + udelay(2); + + reg_val &= ~COREPOR_RST; + writel_relaxed(reg_val, reg + APCS_CPU_PWR_CTL); + mb(); + + reg_val |= CORE_PWRD_UP; + writel_relaxed(reg_val, reg + APCS_CPU_PWR_CTL); + mb(); + + ret = 0; + + iounmap(l2_saw_base); +out_saw_map: + iounmap(reg); +out_map: + of_node_put(saw_node); +out_saw: + of_node_put(l2_node); +out_l2: + of_node_put(acc_node); +out_acc: + of_node_put(cpu_node); + + return ret; +} + +static DEFINE_PER_CPU(int, cold_boot_done); + +static int qcom_boot_secondary(unsigned int cpu, int (*func)(unsigned int)) +{ + int ret = 0; + + if (!per_cpu(cold_boot_done, cpu)) { + ret = func(cpu); + if (!ret) + per_cpu(cold_boot_done, cpu) = true; + } + + /* + * set synchronisation state between this boot processor + * and the secondary one + */ + spin_lock(&boot_lock); + + /* + * Send the secondary CPU a soft interrupt, thereby causing + * the boot monitor to read the system wide flags register, + * and branch to the address found there. + */ + arch_send_wakeup_ipi_mask(cpumask_of(cpu)); + + /* + * now the secondary core is starting up let it run its + * calibrations, then wait for it to finish + */ + spin_unlock(&boot_lock); + + return ret; +} + +static int msm8660_boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + return qcom_boot_secondary(cpu, scss_release_secondary); +} + +static int kpssv1_boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + return qcom_boot_secondary(cpu, kpssv1_release_secondary); +} + +static int kpssv2_boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + return qcom_boot_secondary(cpu, kpssv2_release_secondary); +} + +static void __init qcom_smp_prepare_cpus(unsigned int max_cpus) +{ + int cpu, map; + unsigned int flags = 0; + static const int cold_boot_flags[] = { + 0, + SCM_FLAG_COLDBOOT_CPU1, + SCM_FLAG_COLDBOOT_CPU2, + SCM_FLAG_COLDBOOT_CPU3, + }; + + for_each_present_cpu(cpu) { + map = cpu_logical_map(cpu); + if (WARN_ON(map >= ARRAY_SIZE(cold_boot_flags))) { + set_cpu_present(cpu, false); + continue; + } + flags |= cold_boot_flags[map]; + } + + if (scm_set_boot_addr(virt_to_phys(secondary_startup), flags)) { + for_each_present_cpu(cpu) { + if (cpu == smp_processor_id()) + continue; + set_cpu_present(cpu, false); + } + pr_warn("Failed to set CPU boot address, disabling SMP\n"); + } +} + +static struct smp_operations smp_msm8660_ops __initdata = { + .smp_prepare_cpus = qcom_smp_prepare_cpus, + .smp_secondary_init = qcom_secondary_init, + .smp_boot_secondary = msm8660_boot_secondary, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_die = qcom_cpu_die, +#endif +}; +CPU_METHOD_OF_DECLARE(qcom_smp, "qcom,gcc-msm8660", &smp_msm8660_ops); + +static struct smp_operations qcom_smp_kpssv1_ops __initdata = { + .smp_prepare_cpus = qcom_smp_prepare_cpus, + .smp_secondary_init = qcom_secondary_init, + .smp_boot_secondary = kpssv1_boot_secondary, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_die = qcom_cpu_die, +#endif +}; +CPU_METHOD_OF_DECLARE(qcom_smp_kpssv1, "qcom,kpss-acc-v1", &qcom_smp_kpssv1_ops); + +static struct smp_operations qcom_smp_kpssv2_ops __initdata = { + .smp_prepare_cpus = qcom_smp_prepare_cpus, + .smp_secondary_init = qcom_secondary_init, + .smp_boot_secondary = kpssv2_boot_secondary, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_die = qcom_cpu_die, +#endif +}; +CPU_METHOD_OF_DECLARE(qcom_smp_kpssv2, "qcom,kpss-acc-v2", &qcom_smp_kpssv2_ops); diff --git a/arch/arm/mach-msm/scm-boot.c b/arch/arm/mach-qcom/scm-boot.c index 45cee3e469a..45cee3e469a 100644 --- a/arch/arm/mach-msm/scm-boot.c +++ b/arch/arm/mach-qcom/scm-boot.c diff --git a/arch/arm/mach-msm/scm-boot.h b/arch/arm/mach-qcom/scm-boot.h index 7be32ff5d68..6aabb242817 100644 --- a/arch/arm/mach-msm/scm-boot.h +++ b/arch/arm/mach-qcom/scm-boot.h @@ -13,9 +13,11 @@ #define __MACH_SCM_BOOT_H #define SCM_BOOT_ADDR 0x1 -#define SCM_FLAG_COLDBOOT_CPU1 0x1 -#define SCM_FLAG_WARMBOOT_CPU1 0x2 -#define SCM_FLAG_WARMBOOT_CPU0 0x4 +#define SCM_FLAG_COLDBOOT_CPU1 0x01 +#define SCM_FLAG_COLDBOOT_CPU2 0x08 +#define SCM_FLAG_COLDBOOT_CPU3 0x20 +#define SCM_FLAG_WARMBOOT_CPU0 0x04 +#define SCM_FLAG_WARMBOOT_CPU1 0x02 int scm_set_boot_addr(phys_addr_t addr, int flags); diff --git a/arch/arm/mach-msm/scm.c b/arch/arm/mach-qcom/scm.c index c536fd6bf82..c536fd6bf82 100644 --- a/arch/arm/mach-msm/scm.c +++ b/arch/arm/mach-qcom/scm.c diff --git a/arch/arm/mach-msm/scm.h b/arch/arm/mach-qcom/scm.h index 00b31ea58f2..00b31ea58f2 100644 --- a/arch/arm/mach-msm/scm.h +++ b/arch/arm/mach-qcom/scm.h diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig index cf073dea578..1caee6d548b 100644 --- a/arch/arm/mach-rockchip/Kconfig +++ b/arch/arm/mach-rockchip/Kconfig @@ -5,10 +5,8 @@ config ARCH_ROCKCHIP select ARCH_REQUIRE_GPIOLIB select ARM_GIC select CACHE_L2X0 + select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP - select HAVE_SMP - select COMMON_CLK - select GENERIC_CLOCKEVENTS select DW_APB_TIMER_OF select ARM_GLOBAL_TIMER select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK diff --git a/arch/arm/mach-rockchip/Makefile b/arch/arm/mach-rockchip/Makefile index 1547d4fc920..4377a1436a9 100644 --- a/arch/arm/mach-rockchip/Makefile +++ b/arch/arm/mach-rockchip/Makefile @@ -1 +1,2 @@ obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip.o +obj-$(CONFIG_SMP) += headsmp.o platsmp.o diff --git a/arch/arm/mach-rockchip/core.h b/arch/arm/mach-rockchip/core.h new file mode 100644 index 00000000000..e2e7c9dbb20 --- /dev/null +++ b/arch/arm/mach-rockchip/core.h @@ -0,0 +1,22 @@ +/* + * Copyright (c) 2013 MundoReader S.L. + * Author: Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +extern char rockchip_secondary_trampoline; +extern char rockchip_secondary_trampoline_end; + +extern unsigned long rockchip_boot_fn; +extern void rockchip_secondary_startup(void); + +extern struct smp_operations rockchip_smp_ops; diff --git a/arch/arm/mach-rockchip/headsmp.S b/arch/arm/mach-rockchip/headsmp.S new file mode 100644 index 00000000000..73206e360e3 --- /dev/null +++ b/arch/arm/mach-rockchip/headsmp.S @@ -0,0 +1,30 @@ +/* + * Copyright (c) 2013 MundoReader S.L. + * Author: Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include <linux/linkage.h> +#include <linux/init.h> + +ENTRY(rockchip_secondary_startup) + bl v7_invalidate_l1 + b secondary_startup +ENDPROC(rockchip_secondary_startup) + +ENTRY(rockchip_secondary_trampoline) + ldr pc, 1f +ENDPROC(rockchip_secondary_trampoline) + .globl rockchip_boot_fn +rockchip_boot_fn: +1: .space 4 + +ENTRY(rockchip_secondary_trampoline_end) diff --git a/arch/arm/mach-rockchip/platsmp.c b/arch/arm/mach-rockchip/platsmp.c new file mode 100644 index 00000000000..dbfa5a26cff --- /dev/null +++ b/arch/arm/mach-rockchip/platsmp.c @@ -0,0 +1,184 @@ +/* + * Copyright (c) 2013 MundoReader S.L. + * Author: Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/smp.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> + +#include <asm/cacheflush.h> +#include <asm/smp_scu.h> +#include <asm/smp_plat.h> +#include <asm/mach/map.h> + +#include "core.h" + +static void __iomem *scu_base_addr; +static void __iomem *sram_base_addr; +static int ncores; + +#define PMU_PWRDN_CON 0x08 +#define PMU_PWRDN_ST 0x0c + +#define PMU_PWRDN_SCU 4 + +static void __iomem *pmu_base_addr; + +static inline bool pmu_power_domain_is_on(int pd) +{ + return !(readl_relaxed(pmu_base_addr + PMU_PWRDN_ST) & BIT(pd)); +} + +static void pmu_set_power_domain(int pd, bool on) +{ + u32 val = readl_relaxed(pmu_base_addr + PMU_PWRDN_CON); + if (on) + val &= ~BIT(pd); + else + val |= BIT(pd); + writel(val, pmu_base_addr + PMU_PWRDN_CON); + + while (pmu_power_domain_is_on(pd) != on) { } +} + +/* + * Handling of CPU cores + */ + +static int __cpuinit rockchip_boot_secondary(unsigned int cpu, + struct task_struct *idle) +{ + if (!sram_base_addr || !pmu_base_addr) { + pr_err("%s: sram or pmu missing for cpu boot\n", __func__); + return -ENXIO; + } + + if (cpu >= ncores) { + pr_err("%s: cpu %d outside maximum number of cpus %d\n", + __func__, cpu, ncores); + return -ENXIO; + } + + /* start the core */ + pmu_set_power_domain(0 + cpu, true); + + return 0; +} + +/** + * rockchip_smp_prepare_sram - populate necessary sram block + * Starting cores execute the code residing at the start of the on-chip sram + * after power-on. Therefore make sure, this sram region is reserved and + * big enough. After this check, copy the trampoline code that directs the + * core to the real startup code in ram into the sram-region. + * @node: mmio-sram device node + */ +static int __init rockchip_smp_prepare_sram(struct device_node *node) +{ + unsigned int trampoline_sz = &rockchip_secondary_trampoline_end - + &rockchip_secondary_trampoline; + struct resource res; + unsigned int rsize; + int ret; + + ret = of_address_to_resource(node, 0, &res); + if (ret < 0) { + pr_err("%s: could not get address for node %s\n", + __func__, node->full_name); + return ret; + } + + rsize = resource_size(&res); + if (rsize < trampoline_sz) { + pr_err("%s: reserved block with size 0x%x is to small for trampoline size 0x%x\n", + __func__, rsize, trampoline_sz); + return -EINVAL; + } + + sram_base_addr = of_iomap(node, 0); + + /* set the boot function for the sram code */ + rockchip_boot_fn = virt_to_phys(rockchip_secondary_startup); + + /* copy the trampoline to sram, that runs during startup of the core */ + memcpy(sram_base_addr, &rockchip_secondary_trampoline, trampoline_sz); + flush_cache_all(); + outer_clean_range(0, trampoline_sz); + + dsb_sev(); + + return 0; +} + +static void __init rockchip_smp_prepare_cpus(unsigned int max_cpus) +{ + struct device_node *node; + unsigned int i; + + node = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu"); + if (!node) { + pr_err("%s: missing scu\n", __func__); + return; + } + + scu_base_addr = of_iomap(node, 0); + if (!scu_base_addr) { + pr_err("%s: could not map scu registers\n", __func__); + return; + } + + node = of_find_compatible_node(NULL, NULL, "rockchip,rk3066-smp-sram"); + if (!node) { + pr_err("%s: could not find sram dt node\n", __func__); + return; + } + + if (rockchip_smp_prepare_sram(node)) + return; + + node = of_find_compatible_node(NULL, NULL, "rockchip,rk3066-pmu"); + if (!node) { + pr_err("%s: could not find sram dt node\n", __func__); + return; + } + + pmu_base_addr = of_iomap(node, 0); + if (!pmu_base_addr) { + pr_err("%s: could not map pmu registers\n", __func__); + return; + } + + /* enable the SCU power domain */ + pmu_set_power_domain(PMU_PWRDN_SCU, true); + + /* + * While the number of cpus is gathered from dt, also get the number + * of cores from the scu to verify this value when booting the cores. + */ + ncores = scu_get_core_count(scu_base_addr); + + scu_enable(scu_base_addr); + + /* Make sure that all cores except the first are really off */ + for (i = 1; i < ncores; i++) + pmu_set_power_domain(0 + i, false); +} + +struct smp_operations rockchip_smp_ops __initdata = { + .smp_prepare_cpus = rockchip_smp_prepare_cpus, + .smp_boot_secondary = rockchip_boot_secondary, +}; diff --git a/arch/arm/mach-rockchip/rockchip.c b/arch/arm/mach-rockchip/rockchip.c index 82c0b070971..d211d6fa0d9 100644 --- a/arch/arm/mach-rockchip/rockchip.c +++ b/arch/arm/mach-rockchip/rockchip.c @@ -22,6 +22,7 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/hardware/cache-l2x0.h> +#include "core.h" static void __init rockchip_dt_init(void) { @@ -38,6 +39,7 @@ static const char * const rockchip_board_dt_compat[] = { }; DT_MACHINE_START(ROCKCHIP_DT, "Rockchip Cortex-A9 (Device Tree)") + .smp = smp_ops(rockchip_smp_ops), .init_machine = rockchip_dt_init, .dt_compat = rockchip_board_dt_compat, MACHINE_END diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 338640631e0..c54db0046ce 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -5,18 +5,14 @@ config ARCH_SHMOBILE_MULTI bool "Renesas ARM SoCs" if ARCH_MULTI_V7 depends on MMU select ARCH_SHMOBILE - select CPU_V7 - select GENERIC_CLOCKEVENTS select HAVE_ARM_SCU if SMP - select HAVE_ARM_TWD if LOCAL_TIMERS - select HAVE_SMP + select HAVE_ARM_TWD if SMP select ARM_GIC - select MIGHT_HAVE_CACHE_L2X0 select MIGHT_HAVE_PCI + select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE select NO_IOPORT select PINCTRL select ARCH_REQUIRE_GPIOLIB - select CLKDEV_LOOKUP if ARCH_SHMOBILE_MULTI @@ -123,6 +119,7 @@ config ARCH_R8A7790 select MIGHT_HAVE_PCI select SH_CLK_CPG select RENESAS_IRQC + select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE config ARCH_R8A7791 bool "R-Car M2 (R8A77910)" @@ -132,6 +129,7 @@ config ARCH_R8A7791 select MIGHT_HAVE_PCI select SH_CLK_CPG select RENESAS_IRQC + select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE config ARCH_EMEV2 bool "Emma Mobile EV2" diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index fe7d4ff706e..d38a6362e5f 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -52,7 +52,8 @@ obj-$(CONFIG_CPU_IDLE) += cpuidle.o obj-$(CONFIG_ARCH_SH7372) += pm-sh7372.o sleep-sh7372.o pm-rmobile.o obj-$(CONFIG_ARCH_SH73A0) += pm-sh73a0.o obj-$(CONFIG_ARCH_R8A7740) += pm-r8a7740.o pm-rmobile.o -obj-$(CONFIG_ARCH_R8A7779) += pm-r8a7779.o +obj-$(CONFIG_ARCH_R8A7779) += pm-r8a7779.o pm-rcar.o +obj-$(CONFIG_ARCH_R8A7790) += pm-r8a7790.o pm-rcar.o # Board objects ifdef CONFIG_ARCH_SHMOBILE_MULTI diff --git a/arch/arm/mach-shmobile/include/mach/pm-rcar.h b/arch/arm/mach-shmobile/include/mach/pm-rcar.h new file mode 100644 index 00000000000..ef3a1ef628f --- /dev/null +++ b/arch/arm/mach-shmobile/include/mach/pm-rcar.h @@ -0,0 +1,15 @@ +#ifndef PM_RCAR_H +#define PM_RCAR_H + +struct rcar_sysc_ch { + unsigned long chan_offs; + unsigned int chan_bit; + unsigned int isr_bit; +}; + +int rcar_sysc_power_down(struct rcar_sysc_ch *sysc_ch); +int rcar_sysc_power_up(struct rcar_sysc_ch *sysc_ch); +bool rcar_sysc_power_is_off(struct rcar_sysc_ch *sysc_ch); +void __iomem *rcar_sysc_init(phys_addr_t base); + +#endif /* PM_RCAR_H */ diff --git a/arch/arm/mach-shmobile/include/mach/r8a7779.h b/arch/arm/mach-shmobile/include/mach/r8a7779.h index b40e13631f6..88eeceaf108 100644 --- a/arch/arm/mach-shmobile/include/mach/r8a7779.h +++ b/arch/arm/mach-shmobile/include/mach/r8a7779.h @@ -3,6 +3,7 @@ #include <linux/sh_clk.h> #include <linux/pm_domain.h> +#include <mach/pm-rcar.h> /* HPB-DMA slave IDs */ enum { @@ -11,18 +12,12 @@ enum { HPBDMA_SLAVE_SDHI0_RX, }; -struct r8a7779_pm_ch { - unsigned long chan_offs; - unsigned int chan_bit; - unsigned int isr_bit; -}; - struct r8a7779_pm_domain { struct generic_pm_domain genpd; - struct r8a7779_pm_ch ch; + struct rcar_sysc_ch ch; }; -static inline struct r8a7779_pm_ch *to_r8a7779_ch(struct generic_pm_domain *d) +static inline struct rcar_sysc_ch *to_r8a7779_ch(struct generic_pm_domain *d) { return &container_of(d, struct r8a7779_pm_domain, genpd)->ch; } @@ -41,8 +36,6 @@ extern void r8a7779_clock_init(void); extern void r8a7779_pinmux_init(void); extern void r8a7779_pm_init(void); extern void r8a7779_register_twd(void); -extern int r8a7779_sysc_power_down(struct r8a7779_pm_ch *r8a7779_ch); -extern int r8a7779_sysc_power_up(struct r8a7779_pm_ch *r8a7779_ch); #ifdef CONFIG_PM extern void __init r8a7779_init_pm_domains(void); diff --git a/arch/arm/mach-shmobile/include/mach/r8a7790.h b/arch/arm/mach-shmobile/include/mach/r8a7790.h index 5fbfa28b40b..3389f0775de 100644 --- a/arch/arm/mach-shmobile/include/mach/r8a7790.h +++ b/arch/arm/mach-shmobile/include/mach/r8a7790.h @@ -7,6 +7,7 @@ void r8a7790_add_standard_devices(void); void r8a7790_add_dt_devices(void); void r8a7790_clock_init(void); void r8a7790_pinmux_init(void); +void r8a7790_pm_init(void); void r8a7790_init_early(void); extern struct smp_operations r8a7790_smp_ops; diff --git a/arch/arm/mach-shmobile/platsmp-apmu.c b/arch/arm/mach-shmobile/platsmp-apmu.c index 1da5a72d964..8cb641c00fd 100644 --- a/arch/arm/mach-shmobile/platsmp-apmu.c +++ b/arch/arm/mach-shmobile/platsmp-apmu.c @@ -75,8 +75,7 @@ static void apmu_init_cpu(struct resource *res, int cpu, int bit) apmu_cpus[cpu].iomem = ioremap_nocache(res->start, resource_size(res)); apmu_cpus[cpu].bit = bit; - pr_debug("apmu ioremap %d %d 0x%08x 0x%08x\n", cpu, bit, - res->start, resource_size(res)); + pr_debug("apmu ioremap %d %d %pr\n", cpu, bit, res); } static struct { diff --git a/arch/arm/mach-shmobile/pm-r8a7779.c b/arch/arm/mach-shmobile/pm-r8a7779.c index d50a8e9b94a..d6fe189b2df 100644 --- a/arch/arm/mach-shmobile/pm-r8a7779.c +++ b/arch/arm/mach-shmobile/pm-r8a7779.c @@ -20,132 +20,22 @@ #include <linux/console.h> #include <asm/io.h> #include <mach/common.h> +#include <mach/pm-rcar.h> #include <mach/r8a7779.h> -static void __iomem *r8a7779_sysc_base; - /* SYSC */ -#define SYSCSR 0x00 -#define SYSCISR 0x04 -#define SYSCISCR 0x08 #define SYSCIER 0x0c #define SYSCIMR 0x10 -#define PWRSR0 0x40 -#define PWRSR1 0x80 -#define PWRSR2 0xc0 -#define PWRSR3 0x100 -#define PWRSR4 0x140 - -#define PWRSR_OFFS 0x00 -#define PWROFFCR_OFFS 0x04 -#define PWRONCR_OFFS 0x0c -#define PWRER_OFFS 0x14 - -#define SYSCSR_RETRIES 100 -#define SYSCSR_DELAY_US 1 - -#define SYSCISR_RETRIES 1000 -#define SYSCISR_DELAY_US 1 #if defined(CONFIG_PM) || defined(CONFIG_SMP) -static DEFINE_SPINLOCK(r8a7779_sysc_lock); /* SMP CPUs + I/O devices */ - -static int r8a7779_sysc_pwr_on_off(struct r8a7779_pm_ch *r8a7779_ch, - int sr_bit, int reg_offs) -{ - int k; - - for (k = 0; k < SYSCSR_RETRIES; k++) { - if (ioread32(r8a7779_sysc_base + SYSCSR) & (1 << sr_bit)) - break; - udelay(SYSCSR_DELAY_US); - } - - if (k == SYSCSR_RETRIES) - return -EAGAIN; - - iowrite32(1 << r8a7779_ch->chan_bit, - r8a7779_sysc_base + r8a7779_ch->chan_offs + reg_offs); - - return 0; -} - -static int r8a7779_sysc_pwr_off(struct r8a7779_pm_ch *r8a7779_ch) -{ - return r8a7779_sysc_pwr_on_off(r8a7779_ch, 0, PWROFFCR_OFFS); -} - -static int r8a7779_sysc_pwr_on(struct r8a7779_pm_ch *r8a7779_ch) -{ - return r8a7779_sysc_pwr_on_off(r8a7779_ch, 1, PWRONCR_OFFS); -} - -static int r8a7779_sysc_update(struct r8a7779_pm_ch *r8a7779_ch, - int (*on_off_fn)(struct r8a7779_pm_ch *)) -{ - unsigned int isr_mask = 1 << r8a7779_ch->isr_bit; - unsigned int chan_mask = 1 << r8a7779_ch->chan_bit; - unsigned int status; - unsigned long flags; - int ret = 0; - int k; - - spin_lock_irqsave(&r8a7779_sysc_lock, flags); - - iowrite32(isr_mask, r8a7779_sysc_base + SYSCISCR); - - do { - ret = on_off_fn(r8a7779_ch); - if (ret) - goto out; - - status = ioread32(r8a7779_sysc_base + - r8a7779_ch->chan_offs + PWRER_OFFS); - } while (status & chan_mask); - - for (k = 0; k < SYSCISR_RETRIES; k++) { - if (ioread32(r8a7779_sysc_base + SYSCISR) & isr_mask) - break; - udelay(SYSCISR_DELAY_US); - } - - if (k == SYSCISR_RETRIES) - ret = -EIO; - - iowrite32(isr_mask, r8a7779_sysc_base + SYSCISCR); - - out: - spin_unlock_irqrestore(&r8a7779_sysc_lock, flags); - - pr_debug("r8a7779 power domain %d: %02x %02x %02x %02x %02x -> %d\n", - r8a7779_ch->isr_bit, ioread32(r8a7779_sysc_base + PWRSR0), - ioread32(r8a7779_sysc_base + PWRSR1), - ioread32(r8a7779_sysc_base + PWRSR2), - ioread32(r8a7779_sysc_base + PWRSR3), - ioread32(r8a7779_sysc_base + PWRSR4), ret); - return ret; -} - -int r8a7779_sysc_power_down(struct r8a7779_pm_ch *r8a7779_ch) -{ - return r8a7779_sysc_update(r8a7779_ch, r8a7779_sysc_pwr_off); -} - -int r8a7779_sysc_power_up(struct r8a7779_pm_ch *r8a7779_ch) -{ - return r8a7779_sysc_update(r8a7779_ch, r8a7779_sysc_pwr_on); -} - static void __init r8a7779_sysc_init(void) { - r8a7779_sysc_base = ioremap_nocache(0xffd85000, PAGE_SIZE); - if (!r8a7779_sysc_base) - panic("unable to ioremap r8a7779 SYSC hardware block\n"); + void __iomem *base = rcar_sysc_init(0xffd85000); /* enable all interrupt sources, but do not use interrupt handler */ - iowrite32(0x0131000e, r8a7779_sysc_base + SYSCIER); - iowrite32(0, r8a7779_sysc_base + SYSCIMR); + iowrite32(0x0131000e, base + SYSCIER); + iowrite32(0, base + SYSCIMR); } #else /* CONFIG_PM || CONFIG_SMP */ @@ -158,24 +48,17 @@ static inline void r8a7779_sysc_init(void) {} static int pd_power_down(struct generic_pm_domain *genpd) { - return r8a7779_sysc_power_down(to_r8a7779_ch(genpd)); + return rcar_sysc_power_down(to_r8a7779_ch(genpd)); } static int pd_power_up(struct generic_pm_domain *genpd) { - return r8a7779_sysc_power_up(to_r8a7779_ch(genpd)); + return rcar_sysc_power_up(to_r8a7779_ch(genpd)); } static bool pd_is_off(struct generic_pm_domain *genpd) { - struct r8a7779_pm_ch *r8a7779_ch = to_r8a7779_ch(genpd); - unsigned int st; - - st = ioread32(r8a7779_sysc_base + r8a7779_ch->chan_offs + PWRSR_OFFS); - if (st & (1 << r8a7779_ch->chan_bit)) - return true; - - return false; + return rcar_sysc_power_is_off(to_r8a7779_ch(genpd)); } static bool pd_active_wakeup(struct device *dev) diff --git a/arch/arm/mach-shmobile/pm-r8a7790.c b/arch/arm/mach-shmobile/pm-r8a7790.c new file mode 100644 index 00000000000..fc82839e2c2 --- /dev/null +++ b/arch/arm/mach-shmobile/pm-r8a7790.c @@ -0,0 +1,45 @@ +/* + * r8a7790 Power management support + * + * Copyright (C) 2013 Renesas Electronics Corporation + * Copyright (C) 2011 Renesas Solutions Corp. + * Copyright (C) 2011 Magnus Damm + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/kernel.h> +#include <asm/io.h> +#include <mach/pm-rcar.h> +#include <mach/r8a7790.h> + +/* SYSC */ +#define SYSCIER 0x0c +#define SYSCIMR 0x10 + +#if defined(CONFIG_SMP) + +static void __init r8a7790_sysc_init(void) +{ + void __iomem *base = rcar_sysc_init(0xe6180000); + + /* enable all interrupt sources, but do not use interrupt handler */ + iowrite32(0x0131000e, base + SYSCIER); + iowrite32(0, base + SYSCIMR); +} + +#else /* CONFIG_SMP */ + +static inline void r8a7790_sysc_init(void) {} + +#endif /* CONFIG_SMP */ + +void __init r8a7790_pm_init(void) +{ + static int once; + + if (!once++) + r8a7790_sysc_init(); +} diff --git a/arch/arm/mach-shmobile/pm-rcar.c b/arch/arm/mach-shmobile/pm-rcar.c new file mode 100644 index 00000000000..1f465a12d1b --- /dev/null +++ b/arch/arm/mach-shmobile/pm-rcar.c @@ -0,0 +1,141 @@ +/* + * R-Car SYSC Power management support + * + * Copyright (C) 2014 Magnus Damm + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/mm.h> +#include <linux/spinlock.h> +#include <asm/io.h> +#include <mach/pm-rcar.h> + +/* SYSC */ +#define SYSCSR 0x00 +#define SYSCISR 0x04 +#define SYSCISCR 0x08 + +#define PWRSR_OFFS 0x00 +#define PWROFFCR_OFFS 0x04 +#define PWRONCR_OFFS 0x0c +#define PWRER_OFFS 0x14 + +#define SYSCSR_RETRIES 100 +#define SYSCSR_DELAY_US 1 + +#define SYSCISR_RETRIES 1000 +#define SYSCISR_DELAY_US 1 + +#if defined(CONFIG_PM) || defined(CONFIG_SMP) + +static void __iomem *rcar_sysc_base; +static DEFINE_SPINLOCK(rcar_sysc_lock); /* SMP CPUs + I/O devices */ + +static int rcar_sysc_pwr_on_off(struct rcar_sysc_ch *sysc_ch, + int sr_bit, int reg_offs) +{ + int k; + + for (k = 0; k < SYSCSR_RETRIES; k++) { + if (ioread32(rcar_sysc_base + SYSCSR) & (1 << sr_bit)) + break; + udelay(SYSCSR_DELAY_US); + } + + if (k == SYSCSR_RETRIES) + return -EAGAIN; + + iowrite32(1 << sysc_ch->chan_bit, + rcar_sysc_base + sysc_ch->chan_offs + reg_offs); + + return 0; +} + +static int rcar_sysc_pwr_off(struct rcar_sysc_ch *sysc_ch) +{ + return rcar_sysc_pwr_on_off(sysc_ch, 0, PWROFFCR_OFFS); +} + +static int rcar_sysc_pwr_on(struct rcar_sysc_ch *sysc_ch) +{ + return rcar_sysc_pwr_on_off(sysc_ch, 1, PWRONCR_OFFS); +} + +static int rcar_sysc_update(struct rcar_sysc_ch *sysc_ch, + int (*on_off_fn)(struct rcar_sysc_ch *)) +{ + unsigned int isr_mask = 1 << sysc_ch->isr_bit; + unsigned int chan_mask = 1 << sysc_ch->chan_bit; + unsigned int status; + unsigned long flags; + int ret = 0; + int k; + + spin_lock_irqsave(&rcar_sysc_lock, flags); + + iowrite32(isr_mask, rcar_sysc_base + SYSCISCR); + + do { + ret = on_off_fn(sysc_ch); + if (ret) + goto out; + + status = ioread32(rcar_sysc_base + + sysc_ch->chan_offs + PWRER_OFFS); + } while (status & chan_mask); + + for (k = 0; k < SYSCISR_RETRIES; k++) { + if (ioread32(rcar_sysc_base + SYSCISR) & isr_mask) + break; + udelay(SYSCISR_DELAY_US); + } + + if (k == SYSCISR_RETRIES) + ret = -EIO; + + iowrite32(isr_mask, rcar_sysc_base + SYSCISCR); + + out: + spin_unlock_irqrestore(&rcar_sysc_lock, flags); + + pr_debug("sysc power domain %d: %08x -> %d\n", + sysc_ch->isr_bit, ioread32(rcar_sysc_base + SYSCISR), ret); + return ret; +} + +int rcar_sysc_power_down(struct rcar_sysc_ch *sysc_ch) +{ + return rcar_sysc_update(sysc_ch, rcar_sysc_pwr_off); +} + +int rcar_sysc_power_up(struct rcar_sysc_ch *sysc_ch) +{ + return rcar_sysc_update(sysc_ch, rcar_sysc_pwr_on); +} + +bool rcar_sysc_power_is_off(struct rcar_sysc_ch *sysc_ch) +{ + unsigned int st; + + st = ioread32(rcar_sysc_base + sysc_ch->chan_offs + PWRSR_OFFS); + if (st & (1 << sysc_ch->chan_bit)) + return true; + + return false; +} + +void __iomem *rcar_sysc_init(phys_addr_t base) +{ + rcar_sysc_base = ioremap_nocache(base, PAGE_SIZE); + if (!rcar_sysc_base) + panic("unable to ioremap R-Car SYSC hardware block\n"); + + return rcar_sysc_base; +} + +#endif /* CONFIG_PM || CONFIG_SMP */ diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c index 69ccc6c6fd3..10604480f32 100644 --- a/arch/arm/mach-shmobile/setup-rcar-gen2.c +++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c @@ -28,7 +28,7 @@ #define MODEMR 0xe6160060 -u32 __init rcar_gen2_read_mode_pins(void) +u32 rcar_gen2_read_mode_pins(void) { void __iomem *modemr = ioremap_nocache(MODEMR, 4); u32 mode; diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c index 627c1f0d947..e7a3201473d 100644 --- a/arch/arm/mach-shmobile/smp-r8a7779.c +++ b/arch/arm/mach-shmobile/smp-r8a7779.c @@ -24,6 +24,7 @@ #include <linux/io.h> #include <linux/delay.h> #include <mach/common.h> +#include <mach/pm-rcar.h> #include <mach/r8a7779.h> #include <asm/cacheflush.h> #include <asm/smp_plat.h> @@ -33,25 +34,25 @@ #define AVECR IOMEM(0xfe700040) #define R8A7779_SCU_BASE 0xf0000000 -static struct r8a7779_pm_ch r8a7779_ch_cpu1 = { +static struct rcar_sysc_ch r8a7779_ch_cpu1 = { .chan_offs = 0x40, /* PWRSR0 .. PWRER0 */ .chan_bit = 1, /* ARM1 */ .isr_bit = 1, /* ARM1 */ }; -static struct r8a7779_pm_ch r8a7779_ch_cpu2 = { +static struct rcar_sysc_ch r8a7779_ch_cpu2 = { .chan_offs = 0x40, /* PWRSR0 .. PWRER0 */ .chan_bit = 2, /* ARM2 */ .isr_bit = 2, /* ARM2 */ }; -static struct r8a7779_pm_ch r8a7779_ch_cpu3 = { +static struct rcar_sysc_ch r8a7779_ch_cpu3 = { .chan_offs = 0x40, /* PWRSR0 .. PWRER0 */ .chan_bit = 3, /* ARM3 */ .isr_bit = 3, /* ARM3 */ }; -static struct r8a7779_pm_ch *r8a7779_ch_cpu[4] = { +static struct rcar_sysc_ch *r8a7779_ch_cpu[4] = { [1] = &r8a7779_ch_cpu1, [2] = &r8a7779_ch_cpu2, [3] = &r8a7779_ch_cpu3, @@ -67,7 +68,7 @@ void __init r8a7779_register_twd(void) static int r8a7779_platform_cpu_kill(unsigned int cpu) { - struct r8a7779_pm_ch *ch = NULL; + struct rcar_sysc_ch *ch = NULL; int ret = -EIO; cpu = cpu_logical_map(cpu); @@ -76,14 +77,14 @@ static int r8a7779_platform_cpu_kill(unsigned int cpu) ch = r8a7779_ch_cpu[cpu]; if (ch) - ret = r8a7779_sysc_power_down(ch); + ret = rcar_sysc_power_down(ch); return ret ? ret : 1; } static int r8a7779_boot_secondary(unsigned int cpu, struct task_struct *idle) { - struct r8a7779_pm_ch *ch = NULL; + struct rcar_sysc_ch *ch = NULL; unsigned int lcpu = cpu_logical_map(cpu); int ret; @@ -91,7 +92,7 @@ static int r8a7779_boot_secondary(unsigned int cpu, struct task_struct *idle) ch = r8a7779_ch_cpu[lcpu]; if (ch) - ret = r8a7779_sysc_power_up(ch); + ret = rcar_sysc_power_up(ch); else ret = -EIO; diff --git a/arch/arm/mach-shmobile/smp-r8a7790.c b/arch/arm/mach-shmobile/smp-r8a7790.c index 015e2753de1..591052799e8 100644 --- a/arch/arm/mach-shmobile/smp-r8a7790.c +++ b/arch/arm/mach-shmobile/smp-r8a7790.c @@ -19,6 +19,8 @@ #include <linux/io.h> #include <asm/smp_plat.h> #include <mach/common.h> +#include <mach/pm-rcar.h> +#include <mach/r8a7790.h> #define RST 0xe6160000 #define CA15BAR 0x0020 @@ -27,6 +29,16 @@ #define CA7RESCNT 0x0044 #define MERAM 0xe8080000 +static struct rcar_sysc_ch r8a7790_ca15_scu = { + .chan_offs = 0x180, /* PWRSR5 .. PWRER5 */ + .isr_bit = 12, /* CA15-SCU */ +}; + +static struct rcar_sysc_ch r8a7790_ca7_scu = { + .chan_offs = 0x100, /* PWRSR3 .. PWRER3 */ + .isr_bit = 21, /* CA7-SCU */ +}; + static void __init r8a7790_smp_prepare_cpus(unsigned int max_cpus) { void __iomem *p; @@ -54,6 +66,11 @@ static void __init r8a7790_smp_prepare_cpus(unsigned int max_cpus) writel_relaxed((readl_relaxed(p + CA7RESCNT) & ~0x0f) | 0x5a5a0000, p + CA7RESCNT); iounmap(p); + + /* turn on power to SCU */ + r8a7790_pm_init(); + rcar_sysc_power_up(&r8a7790_ca15_scu); + rcar_sysc_power_up(&r8a7790_ca7_scu); } struct smp_operations r8a7790_smp_ops __initdata = { diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig index aee77f06f88..b5f8d75d51a 100644 --- a/arch/arm/mach-socfpga/Kconfig +++ b/arch/arm/mach-socfpga/Kconfig @@ -1,17 +1,10 @@ config ARCH_SOCFPGA bool "Altera SOCFPGA family" if ARCH_MULTI_V7 - select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_AMBA select ARM_GIC select CACHE_L2X0 - select COMMON_CLK - select CPU_V7 select DW_APB_TIMER_OF - select GENERIC_CLOCKEVENTS select GPIO_PL061 if GPIOLIB select HAVE_ARM_SCU select HAVE_ARM_TWD if SMP - select HAVE_SMP select MFD_SYSCON - select SPARSE_IRQ - select USE_OF diff --git a/arch/arm/mach-spear/Kconfig b/arch/arm/mach-spear/Kconfig index ac1710e64d9..5c57262b97e 100644 --- a/arch/arm/mach-spear/Kconfig +++ b/arch/arm/mach-spear/Kconfig @@ -8,8 +8,6 @@ menuconfig PLAT_SPEAR select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select CLKSRC_MMIO - select COMMON_CLK - select GENERIC_CLOCKEVENTS if PLAT_SPEAR @@ -18,14 +16,10 @@ config ARCH_SPEAR13XX depends on ARCH_MULTI_V7 || PLAT_SPEAR_SINGLE select ARCH_HAS_CPUFREQ select ARM_GIC - select CPU_V7 select GPIO_SPEAR_SPICS select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP - select HAVE_SMP - select MIGHT_HAVE_CACHE_L2X0 select PINCTRL - select USE_OF help Supports for ARM's SPEAR13XX family @@ -50,9 +44,7 @@ config ARCH_SPEAR3XX depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE depends on !ARCH_SPEAR13XX select ARM_VIC - select CPU_ARM926T select PINCTRL - select USE_OF help Supports for ARM's SPEAR3XX family @@ -83,14 +75,12 @@ config ARCH_SPEAR6XX depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE depends on !ARCH_SPEAR13XX select ARM_VIC - select CPU_ARM926T help Supports for ARM's SPEAR6XX family config MACH_SPEAR600 def_bool y depends on ARCH_SPEAR6XX - select USE_OF help Supports ST SPEAr600 boards configured via the device-treesource "arch/arm/mach-spear6xx/Kconfig" diff --git a/arch/arm/mach-sti/Kconfig b/arch/arm/mach-sti/Kconfig index d71654bc8d5..d2c13ba1190 100644 --- a/arch/arm/mach-sti/Kconfig +++ b/arch/arm/mach-sti/Kconfig @@ -1,14 +1,10 @@ menuconfig ARCH_STI bool "STMicroelectronics Consumer Electronics SOCs with Device Trees" if ARCH_MULTI_V7 - select GENERIC_CLOCKEVENTS - select CLKDEV_LOOKUP select ARM_GIC select ARM_GLOBAL_TIMER select PINCTRL select PINCTRL_ST select MFD_SYSCON - select MIGHT_HAVE_CACHE_L2X0 - select HAVE_SMP select HAVE_ARM_SCU if SMP select ARCH_REQUIRE_GPIOLIB select ARM_ERRATA_754322 diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index b9d6cad8669..9de27cfa688 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -5,14 +5,9 @@ config ARCH_SUNXI select ARM_GIC select ARM_PSCI select CLKSRC_MMIO - select CLKSRC_OF - select COMMON_CLK - select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP - select HAVE_SMP select PINCTRL select PINCTRL_SUNXI select RESET_CONTROLLER - select SPARSE_IRQ select SUN4I_TIMER select SUN5I_HSTIMER diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index b1232d8be6f..f61cd5b9f10 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -5,24 +5,16 @@ config ARCH_TEGRA select ARCH_SUPPORTS_TRUSTED_FOUNDATIONS select ARM_GIC select CLKSRC_MMIO - select CLKSRC_OF - select COMMON_CLK - select CPU_V7 - select GENERIC_CLOCKEVENTS select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP - select HAVE_SMP - select MIGHT_HAVE_CACHE_L2X0 select MIGHT_HAVE_PCI select PINCTRL select ARCH_HAS_RESET_CONTROLLER select RESET_CONTROLLER select SOC_BUS - select SPARSE_IRQ select USB_ARCH_HAS_EHCI if USB_SUPPORT select USB_ULPI if USB_PHY select USB_ULPI_VIEWPORT if USB_PHY - select USE_OF help This enables support for NVIDIA Tegra based systems. diff --git a/arch/arm/mach-tegra/pm.c b/arch/arm/mach-tegra/pm.c index 4ae0286b468..f55b05a29b5 100644 --- a/arch/arm/mach-tegra/pm.c +++ b/arch/arm/mach-tegra/pm.c @@ -24,6 +24,7 @@ #include <linux/cpu_pm.h> #include <linux/suspend.h> #include <linux/err.h> +#include <linux/slab.h> #include <linux/clk/tegra.h> #include <asm/smp_plat.h> diff --git a/arch/arm/mach-tegra/tegra.c b/arch/arm/mach-tegra/tegra.c index 303a285d80f..6191603379e 100644 --- a/arch/arm/mach-tegra/tegra.c +++ b/arch/arm/mach-tegra/tegra.c @@ -73,10 +73,20 @@ u32 tegra_uart_config[3] = { static void __init tegra_init_cache(void) { #ifdef CONFIG_CACHE_L2X0 + static const struct of_device_id pl310_ids[] __initconst = { + { .compatible = "arm,pl310-cache", }, + {} + }; + + struct device_node *np; int ret; void __iomem *p = IO_ADDRESS(TEGRA_ARM_PERIF_BASE) + 0x3000; u32 aux_ctrl, cache_type; + np = of_find_matching_node(NULL, pl310_ids); + if (!np) + return; + cache_type = readl(p + L2X0_CACHE_TYPE); aux_ctrl = (cache_type & 0x700) << (17-8); aux_ctrl |= 0x7C400001; diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig index 8e23071bd1b..e3a96d7302e 100644 --- a/arch/arm/mach-u300/Kconfig +++ b/arch/arm/mach-u300/Kconfig @@ -3,20 +3,14 @@ config ARCH_U300 depends on MMU select ARCH_REQUIRE_GPIOLIB select ARM_AMBA - select ARM_PATCH_PHYS_VIRT select ARM_VIC select CLKSRC_MMIO - select CLKSRC_OF - select COMMON_CLK select CPU_ARM926T - select GENERIC_CLOCKEVENTS select HAVE_TCM select PINCTRL select PINCTRL_COH901 select PINCTRL_U300 - select SPARSE_IRQ select MFD_SYSCON - select USE_OF help Support for ST-Ericsson U300 series mobile platforms. diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index 0034d2cd697..8052bd52450 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -11,13 +11,8 @@ config ARCH_U8500 select ARM_GIC select CACHE_L2X0 select CLKSRC_NOMADIK_MTU - select COMMON_CLK - select CPU_V7 - select GENERIC_CLOCKEVENTS select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP - select HAVE_SMP - select MIGHT_HAVE_CACHE_L2X0 select PINCTRL select PINCTRL_ABX500 select PINCTRL_NOMADIK @@ -76,7 +71,6 @@ config UX500_AUTO_PLATFORM config MACH_UX500_DT bool "Generic U8500 support using device tree" depends on MACH_MOP500 - select USE_OF endmenu diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig index 4a70be485ff..80b4be36f10 100644 --- a/arch/arm/mach-vexpress/Kconfig +++ b/arch/arm/mach-vexpress/Kconfig @@ -5,16 +5,11 @@ config ARCH_VEXPRESS select ARM_AMBA select ARM_GIC select ARM_TIMER_SP804 - select COMMON_CLK select COMMON_CLK_VERSATILE - select CPU_V7 - select GENERIC_CLOCKEVENTS select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP select HAVE_PATA_PLATFORM - select HAVE_SMP select ICST - select MIGHT_HAVE_CACHE_L2X0 select NO_IOPORT select PLAT_VERSATILE select PLAT_VERSATILE_CLCD diff --git a/arch/arm/mach-virt/Kconfig b/arch/arm/mach-virt/Kconfig deleted file mode 100644 index 081d4692943..00000000000 --- a/arch/arm/mach-virt/Kconfig +++ /dev/null @@ -1,10 +0,0 @@ -config ARCH_VIRT - bool "Dummy Virtual Machine" if ARCH_MULTI_V7 - select ARCH_WANT_OPTIONAL_GPIOLIB - select ARM_GIC - select HAVE_ARM_ARCH_TIMER - select ARM_PSCI - select HAVE_SMP - select CPU_V7 - select SPARSE_IRQ - select USE_OF diff --git a/arch/arm/mach-virt/Makefile b/arch/arm/mach-virt/Makefile deleted file mode 100644 index 7ddbfa60227..00000000000 --- a/arch/arm/mach-virt/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# -# Makefile for the linux kernel. -# - -obj-y := virt.o diff --git a/arch/arm/mach-virt/virt.c b/arch/arm/mach-virt/virt.c deleted file mode 100644 index b184e57d185..00000000000 --- a/arch/arm/mach-virt/virt.c +++ /dev/null @@ -1,41 +0,0 @@ -/* - * Dummy Virtual Machine - does what it says on the tin. - * - * Copyright (C) 2012 ARM Ltd - * Authors: Will Deacon <will.deacon@arm.com>, - * Marc Zyngier <marc.zyngier@arm.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include <linux/of_irq.h> -#include <linux/of_platform.h> -#include <linux/smp.h> - -#include <asm/mach/arch.h> - -static void __init virt_init(void) -{ - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); -} - -static const char *virt_dt_match[] = { - "linux,dummy-virt", - "xen,xenvm", - NULL -}; - -DT_MACHINE_START(VIRT, "Dummy Virtual Machine") - .init_machine = virt_init, - .dt_compat = virt_dt_match, -MACHINE_END diff --git a/arch/arm/mach-vt8500/Kconfig b/arch/arm/mach-vt8500/Kconfig index 927be93b692..08f56a41cb5 100644 --- a/arch/arm/mach-vt8500/Kconfig +++ b/arch/arm/mach-vt8500/Kconfig @@ -3,8 +3,6 @@ config ARCH_VT8500 select ARCH_HAS_CPUFREQ select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP - select CLKSRC_OF - select GENERIC_CLOCKEVENTS select VT8500_TIMER select PINCTRL help @@ -21,7 +19,6 @@ config ARCH_WM8750 bool "WonderMedia WM8750" depends on ARCH_MULTI_V6 select ARCH_VT8500 - select CPU_V6 help Support for WonderMedia WM8750 System-on-Chip. @@ -29,6 +26,5 @@ config ARCH_WM8850 bool "WonderMedia WM8850" depends on ARCH_MULTI_V7 select ARCH_VT8500 - select CPU_V7 help Support for WonderMedia WM8850 System-on-Chip. diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig index 6b04260aa14..105d39b72a2 100644 --- a/arch/arm/mach-zynq/Kconfig +++ b/arch/arm/mach-zynq/Kconfig @@ -2,16 +2,9 @@ config ARCH_ZYNQ bool "Xilinx Zynq ARM Cortex A9 Platform" if ARCH_MULTI_V7 select ARM_AMBA select ARM_GIC - select COMMON_CLK - select CPU_V7 - select GENERIC_CLOCKEVENTS select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP select ICST - select MIGHT_HAVE_CACHE_L2X0 - select USE_OF - select HAVE_SMP - select SPARSE_IRQ select CADENCE_TTC_TIMER select ARM_GLOBAL_TIMER help diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c index 1db2a5ca9ab..8c09a8393fb 100644 --- a/arch/arm/mach-zynq/common.c +++ b/arch/arm/mach-zynq/common.c @@ -25,6 +25,7 @@ #include <linux/of_irq.h> #include <linux/of_platform.h> #include <linux/of.h> +#include <linux/memblock.h> #include <linux/irqchip.h> #include <linux/irqchip/arm-gic.h> @@ -41,6 +42,18 @@ void __iomem *zynq_scu_base; +/** + * zynq_memory_init - Initialize special memory + * + * We need to stop things allocating the low memory as DMA can't work in + * the 1st 512K of memory. + */ +static void __init zynq_memory_init(void) +{ + if (!__pa(PAGE_OFFSET)) + memblock_reserve(__pa(PAGE_OFFSET), __pa(swapper_pg_dir)); +} + static struct platform_device zynq_cpuidle_device = { .name = "cpuidle-zynq", }; @@ -117,5 +130,6 @@ DT_MACHINE_START(XILINX_EP107, "Xilinx Zynq Platform") .init_machine = zynq_init_machine, .init_time = zynq_timer_init, .dt_compat = zynq_dt_match, + .reserve = zynq_memory_init, .restart = zynq_system_reset, MACHINE_END diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 1f8fed94c2a..dccd7e17765 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -855,7 +855,7 @@ config OUTER_CACHE_SYNC config CACHE_FEROCEON_L2 bool "Enable the Feroceon L2 cache controller" - depends on ARCH_KIRKWOOD || ARCH_MV78XX0 + depends on ARCH_KIRKWOOD || ARCH_MV78XX0 || ARCH_MVEBU default y select OUTER_CACHE help diff --git a/arch/arm/mm/cache-feroceon-l2.c b/arch/arm/mm/cache-feroceon-l2.c index 48bc3c0a87c..8dc1a2b5a8e 100644 --- a/arch/arm/mm/cache-feroceon-l2.c +++ b/arch/arm/mm/cache-feroceon-l2.c @@ -13,10 +13,15 @@ */ #include <linux/init.h> +#include <linux/of.h> +#include <linux/of_address.h> #include <linux/highmem.h> +#include <linux/io.h> #include <asm/cacheflush.h> #include <asm/cp15.h> -#include <plat/cache-feroceon-l2.h> +#include <asm/hardware/cache-feroceon-l2.h> + +#define L2_WRITETHROUGH_KIRKWOOD BIT(4) /* * Low-level cache maintenance operations. @@ -350,3 +355,41 @@ void __init feroceon_l2_init(int __l2_wt_override) printk(KERN_INFO "Feroceon L2: Cache support initialised%s.\n", l2_wt_override ? ", in WT override mode" : ""); } +#ifdef CONFIG_OF +static const struct of_device_id feroceon_ids[] __initconst = { + { .compatible = "marvell,kirkwood-cache"}, + { .compatible = "marvell,feroceon-cache"}, + {} +}; + +int __init feroceon_of_init(void) +{ + struct device_node *node; + void __iomem *base; + bool l2_wt_override = false; + struct resource res; + +#if defined(CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH) + l2_wt_override = true; +#endif + + node = of_find_matching_node(NULL, feroceon_ids); + if (node && of_device_is_compatible(node, "marvell,kirkwood-cache")) { + if (of_address_to_resource(node, 0, &res)) + return -ENODEV; + + base = ioremap(res.start, resource_size(&res)); + if (!base) + return -ENOMEM; + + if (l2_wt_override) + writel(readl(base) | L2_WRITETHROUGH_KIRKWOOD, base); + else + writel(readl(base) & ~L2_WRITETHROUGH_KIRKWOOD, base); + } + + feroceon_l2_init(l2_wt_override); + + return 0; +} +#endif diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 1a77450e728..11b3914660d 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -1358,7 +1358,7 @@ static void *arm_iommu_alloc_attrs(struct device *dev, size_t size, *handle = DMA_ERROR_CODE; size = PAGE_ALIGN(size); - if (gfp & GFP_ATOMIC) + if (!(gfp & __GFP_WAIT)) return __iommu_alloc_atomic(dev, size, handle); /* diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h index d5a982d15a8..7ea641b7aa7 100644 --- a/arch/arm/mm/mm.h +++ b/arch/arm/mm/mm.h @@ -38,6 +38,7 @@ static inline pmd_t *pmd_off_k(unsigned long virt) struct mem_type { pteval_t prot_pte; + pteval_t prot_pte_s2; pmdval_t prot_l1; pmdval_t prot_sect; unsigned int domain; diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 4f08c133cc2..a623cb3ad01 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -232,12 +232,16 @@ __setup("noalign", noalign_setup); #endif /* ifdef CONFIG_CPU_CP15 / else */ #define PROT_PTE_DEVICE L_PTE_PRESENT|L_PTE_YOUNG|L_PTE_DIRTY|L_PTE_XN +#define PROT_PTE_S2_DEVICE PROT_PTE_DEVICE #define PROT_SECT_DEVICE PMD_TYPE_SECT|PMD_SECT_AP_WRITE static struct mem_type mem_types[] = { [MT_DEVICE] = { /* Strongly ordered / ARMv6 shared device */ .prot_pte = PROT_PTE_DEVICE | L_PTE_MT_DEV_SHARED | L_PTE_SHARED, + .prot_pte_s2 = s2_policy(PROT_PTE_S2_DEVICE) | + s2_policy(L_PTE_S2_MT_DEV_SHARED) | + L_PTE_SHARED, .prot_l1 = PMD_TYPE_TABLE, .prot_sect = PROT_SECT_DEVICE | PMD_SECT_S, .domain = DOMAIN_IO, @@ -508,7 +512,8 @@ static void __init build_mem_type_table(void) cp = &cache_policies[cachepolicy]; vecs_pgprot = kern_pgprot = user_pgprot = cp->pte; s2_pgprot = cp->pte_s2; - hyp_device_pgprot = s2_device_pgprot = mem_types[MT_DEVICE].prot_pte; + hyp_device_pgprot = mem_types[MT_DEVICE].prot_pte; + s2_device_pgprot = mem_types[MT_DEVICE].prot_pte_s2; /* * ARMv6 and above have extended page tables. diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index 45dc29f85d5..32b3558321c 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -208,7 +208,6 @@ __v6_setup: mcr p15, 0, r0, c7, c14, 0 @ clean+invalidate D cache mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache mcr p15, 0, r0, c7, c15, 0 @ clean+invalidate cache - mcr p15, 0, r0, c7, c10, 4 @ drain write buffer #ifdef CONFIG_MMU mcr p15, 0, r0, c8, c7, 0 @ invalidate I + D TLBs mcr p15, 0, r0, c2, c0, 2 @ TTB control register @@ -218,6 +217,8 @@ __v6_setup: ALT_UP(orr r8, r8, #TTB_FLAGS_UP) mcr p15, 0, r8, c2, c0, 1 @ load TTB1 #endif /* CONFIG_MMU */ + mcr p15, 0, r0, c7, c10, 4 @ drain write buffer and + @ complete invalidations adr r5, v6_crval ldmia r5, {r5, r6} ARM_BE8(orr r6, r6, #1 << 25) @ big-endian page tables diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index bd1781979a3..74f6033e76d 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -351,7 +351,6 @@ __v7_setup: 4: mov r10, #0 mcr p15, 0, r10, c7, c5, 0 @ I+BTB cache invalidate - dsb #ifdef CONFIG_MMU mcr p15, 0, r10, c8, c7, 0 @ invalidate I + D TLBs v7_ttb_setup r10, r4, r8, r5 @ TTBCR, TTBRx setup @@ -360,6 +359,7 @@ __v7_setup: mcr p15, 0, r5, c10, c2, 0 @ write PRRR mcr p15, 0, r6, c10, c2, 1 @ write NMRR #endif + dsb @ Complete invalidations #ifndef CONFIG_ARM_THUMBEE mrc p15, 0, r0, c0, c1, 0 @ read ID_PFR0 for ThumbEE and r0, r0, #(0xf << 12) @ ThumbEE enabled field diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index dd4327f09ba..27bbcfc7202 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -36,6 +36,7 @@ config ARM64 select HAVE_GENERIC_DMA_COHERENT select HAVE_HW_BREAKPOINT if PERF_EVENTS select HAVE_MEMBLOCK + select HAVE_PATA_PLATFORM select HAVE_PERF_EVENTS select IRQ_DOMAIN select MODULES_USE_ELF_RELA diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 84139be62ae..7959dd0ca5d 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y # CONFIG_LOCALVERSION_AUTO is not set # CONFIG_SWAP is not set CONFIG_SYSVIPC=y @@ -19,6 +18,7 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_KALLSYMS_ALL=y # CONFIG_COMPAT_BRK is not set CONFIG_PROFILING=y +CONFIG_JUMP_LABEL=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set @@ -27,6 +27,7 @@ CONFIG_ARCH_VEXPRESS=y CONFIG_ARCH_XGENE=y CONFIG_SMP=y CONFIG_PREEMPT=y +CONFIG_CMA=y CONFIG_CMDLINE="console=ttyAMA0" # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_COMPAT=y @@ -42,14 +43,17 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y -CONFIG_BLK_DEV=y +CONFIG_DMA_CMA=y CONFIG_SCSI=y # CONFIG_SCSI_PROC_FS is not set CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_LOWLEVEL is not set +CONFIG_ATA=y +CONFIG_PATA_PLATFORM=y +CONFIG_PATA_OF_PLATFORM=y CONFIG_NETDEVICES=y -CONFIG_MII=y CONFIG_SMC91X=y +CONFIG_SMSC911X=y # CONFIG_WLAN is not set CONFIG_INPUT_EVDEV=y # CONFIG_SERIO_I8042 is not set @@ -62,13 +66,19 @@ CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y # CONFIG_HW_RANDOM is not set # CONFIG_HWMON is not set +CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_FB=y # CONFIG_VGA_CONSOLE is not set CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set # CONFIG_LOGO_LINUX_VGA16 is not set -# CONFIG_USB_SUPPORT is not set +CONFIG_USB=y +CONFIG_USB_ISP1760_HCD=y +CONFIG_USB_STORAGE=y +CONFIG_MMC=y +CONFIG_MMC_ARMMMCI=y # CONFIG_IOMMU_SUPPORT is not set CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y diff --git a/arch/arm64/include/asm/atomic.h b/arch/arm64/include/asm/atomic.h index 01de5aaa3ed..0237f0867e3 100644 --- a/arch/arm64/include/asm/atomic.h +++ b/arch/arm64/include/asm/atomic.h @@ -54,8 +54,7 @@ static inline void atomic_add(int i, atomic_t *v) " stxr %w1, %w0, %2\n" " cbnz %w1, 1b" : "=&r" (result), "=&r" (tmp), "+Q" (v->counter) - : "Ir" (i) - : "cc"); + : "Ir" (i)); } static inline int atomic_add_return(int i, atomic_t *v) @@ -64,14 +63,15 @@ static inline int atomic_add_return(int i, atomic_t *v) int result; asm volatile("// atomic_add_return\n" -"1: ldaxr %w0, %2\n" +"1: ldxr %w0, %2\n" " add %w0, %w0, %w3\n" " stlxr %w1, %w0, %2\n" " cbnz %w1, 1b" : "=&r" (result), "=&r" (tmp), "+Q" (v->counter) : "Ir" (i) - : "cc", "memory"); + : "memory"); + smp_mb(); return result; } @@ -86,8 +86,7 @@ static inline void atomic_sub(int i, atomic_t *v) " stxr %w1, %w0, %2\n" " cbnz %w1, 1b" : "=&r" (result), "=&r" (tmp), "+Q" (v->counter) - : "Ir" (i) - : "cc"); + : "Ir" (i)); } static inline int atomic_sub_return(int i, atomic_t *v) @@ -96,14 +95,15 @@ static inline int atomic_sub_return(int i, atomic_t *v) int result; asm volatile("// atomic_sub_return\n" -"1: ldaxr %w0, %2\n" +"1: ldxr %w0, %2\n" " sub %w0, %w0, %w3\n" " stlxr %w1, %w0, %2\n" " cbnz %w1, 1b" : "=&r" (result), "=&r" (tmp), "+Q" (v->counter) : "Ir" (i) - : "cc", "memory"); + : "memory"); + smp_mb(); return result; } @@ -112,17 +112,20 @@ static inline int atomic_cmpxchg(atomic_t *ptr, int old, int new) unsigned long tmp; int oldval; + smp_mb(); + asm volatile("// atomic_cmpxchg\n" -"1: ldaxr %w1, %2\n" +"1: ldxr %w1, %2\n" " cmp %w1, %w3\n" " b.ne 2f\n" -" stlxr %w0, %w4, %2\n" +" stxr %w0, %w4, %2\n" " cbnz %w0, 1b\n" "2:" : "=&r" (tmp), "=&r" (oldval), "+Q" (ptr->counter) : "Ir" (old), "r" (new) - : "cc", "memory"); + : "cc"); + smp_mb(); return oldval; } @@ -173,8 +176,7 @@ static inline void atomic64_add(u64 i, atomic64_t *v) " stxr %w1, %0, %2\n" " cbnz %w1, 1b" : "=&r" (result), "=&r" (tmp), "+Q" (v->counter) - : "Ir" (i) - : "cc"); + : "Ir" (i)); } static inline long atomic64_add_return(long i, atomic64_t *v) @@ -183,14 +185,15 @@ static inline long atomic64_add_return(long i, atomic64_t *v) unsigned long tmp; asm volatile("// atomic64_add_return\n" -"1: ldaxr %0, %2\n" +"1: ldxr %0, %2\n" " add %0, %0, %3\n" " stlxr %w1, %0, %2\n" " cbnz %w1, 1b" : "=&r" (result), "=&r" (tmp), "+Q" (v->counter) : "Ir" (i) - : "cc", "memory"); + : "memory"); + smp_mb(); return result; } @@ -205,8 +208,7 @@ static inline void atomic64_sub(u64 i, atomic64_t *v) " stxr %w1, %0, %2\n" " cbnz %w1, 1b" : "=&r" (result), "=&r" (tmp), "+Q" (v->counter) - : "Ir" (i) - : "cc"); + : "Ir" (i)); } static inline long atomic64_sub_return(long i, atomic64_t *v) @@ -215,14 +217,15 @@ static inline long atomic64_sub_return(long i, atomic64_t *v) unsigned long tmp; asm volatile("// atomic64_sub_return\n" -"1: ldaxr %0, %2\n" +"1: ldxr %0, %2\n" " sub %0, %0, %3\n" " stlxr %w1, %0, %2\n" " cbnz %w1, 1b" : "=&r" (result), "=&r" (tmp), "+Q" (v->counter) : "Ir" (i) - : "cc", "memory"); + : "memory"); + smp_mb(); return result; } @@ -231,17 +234,20 @@ static inline long atomic64_cmpxchg(atomic64_t *ptr, long old, long new) long oldval; unsigned long res; + smp_mb(); + asm volatile("// atomic64_cmpxchg\n" -"1: ldaxr %1, %2\n" +"1: ldxr %1, %2\n" " cmp %1, %3\n" " b.ne 2f\n" -" stlxr %w0, %4, %2\n" +" stxr %w0, %4, %2\n" " cbnz %w0, 1b\n" "2:" : "=&r" (res), "=&r" (oldval), "+Q" (ptr->counter) : "Ir" (old), "r" (new) - : "cc", "memory"); + : "cc"); + smp_mb(); return oldval; } @@ -253,11 +259,12 @@ static inline long atomic64_dec_if_positive(atomic64_t *v) unsigned long tmp; asm volatile("// atomic64_dec_if_positive\n" -"1: ldaxr %0, %2\n" +"1: ldxr %0, %2\n" " subs %0, %0, #1\n" " b.mi 2f\n" " stlxr %w1, %0, %2\n" " cbnz %w1, 1b\n" +" dmb ish\n" "2:" : "=&r" (result), "=&r" (tmp), "+Q" (v->counter) : diff --git a/arch/arm64/include/asm/barrier.h b/arch/arm64/include/asm/barrier.h index 78e20ba8806..409ca370cfe 100644 --- a/arch/arm64/include/asm/barrier.h +++ b/arch/arm64/include/asm/barrier.h @@ -25,7 +25,7 @@ #define wfi() asm volatile("wfi" : : : "memory") #define isb() asm volatile("isb" : : : "memory") -#define dsb() asm volatile("dsb sy" : : : "memory") +#define dsb(opt) asm volatile("dsb sy" : : : "memory") #define mb() dsb() #define rmb() asm volatile("dsb ld" : : : "memory") diff --git a/arch/arm64/include/asm/cacheflush.h b/arch/arm64/include/asm/cacheflush.h index fea9ee32720..889324981aa 100644 --- a/arch/arm64/include/asm/cacheflush.h +++ b/arch/arm64/include/asm/cacheflush.h @@ -116,6 +116,7 @@ extern void flush_dcache_page(struct page *); static inline void __flush_icache_all(void) { asm("ic ialluis"); + dsb(); } #define flush_dcache_mmap_lock(mapping) \ diff --git a/arch/arm64/include/asm/cmpxchg.h b/arch/arm64/include/asm/cmpxchg.h index 56166d7f4a2..57c0fa7bf71 100644 --- a/arch/arm64/include/asm/cmpxchg.h +++ b/arch/arm64/include/asm/cmpxchg.h @@ -29,44 +29,45 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size switch (size) { case 1: asm volatile("// __xchg1\n" - "1: ldaxrb %w0, %2\n" + "1: ldxrb %w0, %2\n" " stlxrb %w1, %w3, %2\n" " cbnz %w1, 1b\n" : "=&r" (ret), "=&r" (tmp), "+Q" (*(u8 *)ptr) : "r" (x) - : "cc", "memory"); + : "memory"); break; case 2: asm volatile("// __xchg2\n" - "1: ldaxrh %w0, %2\n" + "1: ldxrh %w0, %2\n" " stlxrh %w1, %w3, %2\n" " cbnz %w1, 1b\n" : "=&r" (ret), "=&r" (tmp), "+Q" (*(u16 *)ptr) : "r" (x) - : "cc", "memory"); + : "memory"); break; case 4: asm volatile("// __xchg4\n" - "1: ldaxr %w0, %2\n" + "1: ldxr %w0, %2\n" " stlxr %w1, %w3, %2\n" " cbnz %w1, 1b\n" : "=&r" (ret), "=&r" (tmp), "+Q" (*(u32 *)ptr) : "r" (x) - : "cc", "memory"); + : "memory"); break; case 8: asm volatile("// __xchg8\n" - "1: ldaxr %0, %2\n" + "1: ldxr %0, %2\n" " stlxr %w1, %3, %2\n" " cbnz %w1, 1b\n" : "=&r" (ret), "=&r" (tmp), "+Q" (*(u64 *)ptr) : "r" (x) - : "cc", "memory"); + : "memory"); break; default: BUILD_BUG(); } + smp_mb(); return ret; } diff --git a/arch/arm64/include/asm/esr.h b/arch/arm64/include/asm/esr.h index 78834123a32..c4a7f940b38 100644 --- a/arch/arm64/include/asm/esr.h +++ b/arch/arm64/include/asm/esr.h @@ -42,7 +42,7 @@ #define ESR_EL1_EC_SP_ALIGN (0x26) #define ESR_EL1_EC_FP_EXC32 (0x28) #define ESR_EL1_EC_FP_EXC64 (0x2C) -#define ESR_EL1_EC_SERRROR (0x2F) +#define ESR_EL1_EC_SERROR (0x2F) #define ESR_EL1_EC_BREAKPT_EL0 (0x30) #define ESR_EL1_EC_BREAKPT_EL1 (0x31) #define ESR_EL1_EC_SOFTSTP_EL0 (0x32) diff --git a/arch/arm64/include/asm/futex.h b/arch/arm64/include/asm/futex.h index 78cc3aba5d6..5f750dc96e0 100644 --- a/arch/arm64/include/asm/futex.h +++ b/arch/arm64/include/asm/futex.h @@ -24,10 +24,11 @@ #define __futex_atomic_op(insn, ret, oldval, uaddr, tmp, oparg) \ asm volatile( \ -"1: ldaxr %w1, %2\n" \ +"1: ldxr %w1, %2\n" \ insn "\n" \ "2: stlxr %w3, %w0, %2\n" \ " cbnz %w3, 1b\n" \ +" dmb ish\n" \ "3:\n" \ " .pushsection .fixup,\"ax\"\n" \ " .align 2\n" \ @@ -40,7 +41,7 @@ " .popsection\n" \ : "=&r" (ret), "=&r" (oldval), "+Q" (*uaddr), "=&r" (tmp) \ : "r" (oparg), "Ir" (-EFAULT) \ - : "cc", "memory") + : "memory") static inline int futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr) @@ -111,11 +112,12 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, return -EFAULT; asm volatile("// futex_atomic_cmpxchg_inatomic\n" -"1: ldaxr %w1, %2\n" +"1: ldxr %w1, %2\n" " sub %w3, %w1, %w4\n" " cbnz %w3, 3f\n" "2: stlxr %w3, %w5, %2\n" " cbnz %w3, 1b\n" +" dmb ish\n" "3:\n" " .pushsection .fixup,\"ax\"\n" "4: mov %w0, %w6\n" @@ -127,7 +129,7 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, " .popsection\n" : "+r" (ret), "=&r" (val), "+Q" (*uaddr), "=&r" (tmp) : "r" (oldval), "r" (newval), "Ir" (-EFAULT) - : "cc", "memory"); + : "memory"); *uval = val; return ret; diff --git a/arch/arm64/include/asm/kvm_arm.h b/arch/arm64/include/asm/kvm_arm.h index c98ef4771c7..0eb39865537 100644 --- a/arch/arm64/include/asm/kvm_arm.h +++ b/arch/arm64/include/asm/kvm_arm.h @@ -231,7 +231,7 @@ #define ESR_EL2_EC_SP_ALIGN (0x26) #define ESR_EL2_EC_FP_EXC32 (0x28) #define ESR_EL2_EC_FP_EXC64 (0x2C) -#define ESR_EL2_EC_SERRROR (0x2F) +#define ESR_EL2_EC_SERROR (0x2F) #define ESR_EL2_EC_BREAKPT (0x30) #define ESR_EL2_EC_BREAKPT_HYP (0x31) #define ESR_EL2_EC_SOFTSTP (0x32) diff --git a/arch/arm64/include/asm/spinlock.h b/arch/arm64/include/asm/spinlock.h index 3d5cf064d7a..c45b7b1b719 100644 --- a/arch/arm64/include/asm/spinlock.h +++ b/arch/arm64/include/asm/spinlock.h @@ -132,7 +132,7 @@ static inline void arch_write_lock(arch_rwlock_t *rw) " cbnz %w0, 2b\n" : "=&r" (tmp), "+Q" (rw->lock) : "r" (0x80000000) - : "cc", "memory"); + : "memory"); } static inline int arch_write_trylock(arch_rwlock_t *rw) @@ -146,7 +146,7 @@ static inline int arch_write_trylock(arch_rwlock_t *rw) "1:\n" : "=&r" (tmp), "+Q" (rw->lock) : "r" (0x80000000) - : "cc", "memory"); + : "memory"); return !tmp; } @@ -187,7 +187,7 @@ static inline void arch_read_lock(arch_rwlock_t *rw) " cbnz %w1, 2b\n" : "=&r" (tmp), "=&r" (tmp2), "+Q" (rw->lock) : - : "cc", "memory"); + : "memory"); } static inline void arch_read_unlock(arch_rwlock_t *rw) @@ -201,7 +201,7 @@ static inline void arch_read_unlock(arch_rwlock_t *rw) " cbnz %w1, 1b\n" : "=&r" (tmp), "=&r" (tmp2), "+Q" (rw->lock) : - : "cc", "memory"); + : "memory"); } static inline int arch_read_trylock(arch_rwlock_t *rw) @@ -216,7 +216,7 @@ static inline int arch_read_trylock(arch_rwlock_t *rw) "1:\n" : "=&r" (tmp), "+r" (tmp2), "+Q" (rw->lock) : - : "cc", "memory"); + : "memory"); return !tmp2; } diff --git a/arch/arm64/include/asm/unistd32.h b/arch/arm64/include/asm/unistd32.h index 58125bf008d..bb8eb8a78e6 100644 --- a/arch/arm64/include/asm/unistd32.h +++ b/arch/arm64/include/asm/unistd32.h @@ -399,7 +399,10 @@ __SYSCALL(374, compat_sys_sendmmsg) __SYSCALL(375, sys_setns) __SYSCALL(376, compat_sys_process_vm_readv) __SYSCALL(377, compat_sys_process_vm_writev) -__SYSCALL(378, sys_ni_syscall) /* 378 for kcmp */ +__SYSCALL(378, sys_kcmp) +__SYSCALL(379, sys_finit_module) +__SYSCALL(380, sys_sched_setattr) +__SYSCALL(381, sys_sched_getattr) #define __NR_compat_syscalls 379 diff --git a/arch/arm64/include/uapi/asm/kvm.h b/arch/arm64/include/uapi/asm/kvm.h index 495ab6f84a6..eaf54a30bed 100644 --- a/arch/arm64/include/uapi/asm/kvm.h +++ b/arch/arm64/include/uapi/asm/kvm.h @@ -148,6 +148,15 @@ struct kvm_arch_memory_slot { #define KVM_REG_ARM_TIMER_CNT ARM64_SYS_REG(3, 3, 14, 3, 2) #define KVM_REG_ARM_TIMER_CVAL ARM64_SYS_REG(3, 3, 14, 0, 2) +/* Device Control API: ARM VGIC */ +#define KVM_DEV_ARM_VGIC_GRP_ADDR 0 +#define KVM_DEV_ARM_VGIC_GRP_DIST_REGS 1 +#define KVM_DEV_ARM_VGIC_GRP_CPU_REGS 2 +#define KVM_DEV_ARM_VGIC_CPUID_SHIFT 32 +#define KVM_DEV_ARM_VGIC_CPUID_MASK (0xffULL << KVM_DEV_ARM_VGIC_CPUID_SHIFT) +#define KVM_DEV_ARM_VGIC_OFFSET_SHIFT 0 +#define KVM_DEV_ARM_VGIC_OFFSET_MASK (0xffffffffULL << KVM_DEV_ARM_VGIC_OFFSET_SHIFT) + /* KVM_IRQ_LINE irq field index values */ #define KVM_ARM_IRQ_TYPE_SHIFT 24 #define KVM_ARM_IRQ_TYPE_MASK 0xff diff --git a/arch/arm64/kernel/kuser32.S b/arch/arm64/kernel/kuser32.S index 63c48ffdf23..7787208e8cc 100644 --- a/arch/arm64/kernel/kuser32.S +++ b/arch/arm64/kernel/kuser32.S @@ -38,12 +38,13 @@ __kuser_cmpxchg64: // 0xffff0f60 .inst 0xe92d00f0 // push {r4, r5, r6, r7} .inst 0xe1c040d0 // ldrd r4, r5, [r0] .inst 0xe1c160d0 // ldrd r6, r7, [r1] - .inst 0xe1b20e9f // 1: ldaexd r0, r1, [r2] + .inst 0xe1b20f9f // 1: ldrexd r0, r1, [r2] .inst 0xe0303004 // eors r3, r0, r4 .inst 0x00313005 // eoreqs r3, r1, r5 .inst 0x01a23e96 // stlexdeq r3, r6, [r2] .inst 0x03330001 // teqeq r3, #1 .inst 0x0afffff9 // beq 1b + .inst 0xf57ff05b // dmb ish .inst 0xe2730000 // rsbs r0, r3, #0 .inst 0xe8bd00f0 // pop {r4, r5, r6, r7} .inst 0xe12fff1e // bx lr @@ -55,11 +56,12 @@ __kuser_memory_barrier: // 0xffff0fa0 .align 5 __kuser_cmpxchg: // 0xffff0fc0 - .inst 0xe1923e9f // 1: ldaex r3, [r2] + .inst 0xe1923f9f // 1: ldrex r3, [r2] .inst 0xe0533000 // subs r3, r3, r0 .inst 0x01823e91 // stlexeq r3, r1, [r2] .inst 0x03330001 // teqeq r3, #1 .inst 0x0afffffa // beq 1b + .inst 0xf57ff05b // dmb ish .inst 0xe2730000 // rsbs r0, r3, #0 .inst 0xe12fff1e // bx lr diff --git a/arch/arm64/kernel/vdso.c b/arch/arm64/kernel/vdso.c index 65d40cf6945..a7149cae161 100644 --- a/arch/arm64/kernel/vdso.c +++ b/arch/arm64/kernel/vdso.c @@ -238,6 +238,8 @@ void update_vsyscall(struct timekeeper *tk) vdso_data->use_syscall = use_syscall; vdso_data->xtime_coarse_sec = xtime_coarse.tv_sec; vdso_data->xtime_coarse_nsec = xtime_coarse.tv_nsec; + vdso_data->wtm_clock_sec = tk->wall_to_monotonic.tv_sec; + vdso_data->wtm_clock_nsec = tk->wall_to_monotonic.tv_nsec; if (!use_syscall) { vdso_data->cs_cycle_last = tk->clock->cycle_last; @@ -245,8 +247,6 @@ void update_vsyscall(struct timekeeper *tk) vdso_data->xtime_clock_nsec = tk->xtime_nsec; vdso_data->cs_mult = tk->mult; vdso_data->cs_shift = tk->shift; - vdso_data->wtm_clock_sec = tk->wall_to_monotonic.tv_sec; - vdso_data->wtm_clock_nsec = tk->wall_to_monotonic.tv_nsec; } smp_wmb(); diff --git a/arch/arm64/kernel/vdso/Makefile b/arch/arm64/kernel/vdso/Makefile index d8064af42e6..6d20b7d162d 100644 --- a/arch/arm64/kernel/vdso/Makefile +++ b/arch/arm64/kernel/vdso/Makefile @@ -48,7 +48,7 @@ $(obj-vdso): %.o: %.S # Actual build commands quiet_cmd_vdsold = VDSOL $@ - cmd_vdsold = $(CC) $(c_flags) -Wl,-T $^ -o $@ + cmd_vdsold = $(CC) $(c_flags) -Wl,-n -Wl,-T $^ -o $@ quiet_cmd_vdsoas = VDSOA $@ cmd_vdsoas = $(CC) $(a_flags) -c -o $@ $< diff --git a/arch/arm64/kernel/vdso/gettimeofday.S b/arch/arm64/kernel/vdso/gettimeofday.S index f0a6d10b521..fe652ffd34c 100644 --- a/arch/arm64/kernel/vdso/gettimeofday.S +++ b/arch/arm64/kernel/vdso/gettimeofday.S @@ -103,6 +103,8 @@ ENTRY(__kernel_clock_gettime) bl __do_get_tspec seqcnt_check w9, 1b + mov x30, x2 + cmp w0, #CLOCK_MONOTONIC b.ne 6f @@ -118,6 +120,9 @@ ENTRY(__kernel_clock_gettime) ccmp w0, #CLOCK_MONOTONIC_COARSE, #0x4, ne b.ne 8f + /* xtime_coarse_nsec is already right-shifted */ + mov x12, #0 + /* Get coarse timespec. */ adr vdso_data, _vdso_data 3: seqcnt_acquire @@ -156,7 +161,7 @@ ENTRY(__kernel_clock_gettime) lsr x11, x11, x12 stp x10, x11, [x1, #TSPEC_TV_SEC] mov x0, xzr - ret x2 + ret 7: mov x30, x2 8: /* Syscall fallback. */ diff --git a/arch/arm64/lib/bitops.S b/arch/arm64/lib/bitops.S index e5db797790d..7dac371cc9a 100644 --- a/arch/arm64/lib/bitops.S +++ b/arch/arm64/lib/bitops.S @@ -46,11 +46,12 @@ ENTRY( \name ) mov x2, #1 add x1, x1, x0, lsr #3 // Get word offset lsl x4, x2, x3 // Create mask -1: ldaxr x2, [x1] +1: ldxr x2, [x1] lsr x0, x2, x3 // Save old value of bit \instr x2, x2, x4 // toggle bit stlxr w5, x2, [x1] cbnz w5, 1b + dmb ish and x0, x0, #1 3: ret ENDPROC(\name ) diff --git a/arch/arm64/mm/dma-mapping.c b/arch/arm64/mm/dma-mapping.c index 45b5ab54c9e..fbd76785c5d 100644 --- a/arch/arm64/mm/dma-mapping.c +++ b/arch/arm64/mm/dma-mapping.c @@ -45,6 +45,7 @@ static void *arm64_swiotlb_alloc_coherent(struct device *dev, size_t size, if (IS_ENABLED(CONFIG_DMA_CMA)) { struct page *page; + size = PAGE_ALIGN(size); page = dma_alloc_from_contiguous(dev, size >> PAGE_SHIFT, get_order(size)); if (!page) diff --git a/arch/arm64/mm/mmu.c b/arch/arm64/mm/mmu.c index f557ebbe701..f8dc7e8fce6 100644 --- a/arch/arm64/mm/mmu.c +++ b/arch/arm64/mm/mmu.c @@ -203,10 +203,18 @@ static void __init alloc_init_pmd(pud_t *pud, unsigned long addr, do { next = pmd_addr_end(addr, end); /* try section mapping first */ - if (((addr | next | phys) & ~SECTION_MASK) == 0) + if (((addr | next | phys) & ~SECTION_MASK) == 0) { + pmd_t old_pmd =*pmd; set_pmd(pmd, __pmd(phys | prot_sect_kernel)); - else + /* + * Check for previous table entries created during + * boot (__create_page_tables) and flush them. + */ + if (!pmd_none(old_pmd)) + flush_tlb_all(); + } else { alloc_init_pte(pmd, addr, next, __phys_to_pfn(phys)); + } phys += next - addr; } while (pmd++, addr = next, addr != end); } diff --git a/arch/arm64/mm/pgd.c b/arch/arm64/mm/pgd.c index 7083cdada65..62c6101df26 100644 --- a/arch/arm64/mm/pgd.c +++ b/arch/arm64/mm/pgd.c @@ -32,17 +32,10 @@ pgd_t *pgd_alloc(struct mm_struct *mm) { - pgd_t *new_pgd; - if (PGD_SIZE == PAGE_SIZE) - new_pgd = (pgd_t *)get_zeroed_page(GFP_KERNEL); + return (pgd_t *)get_zeroed_page(GFP_KERNEL); else - new_pgd = kzalloc(PGD_SIZE, GFP_KERNEL); - - if (!new_pgd) - return NULL; - - return new_pgd; + return kzalloc(PGD_SIZE, GFP_KERNEL); } void pgd_free(struct mm_struct *mm, pgd_t *pgd) diff --git a/arch/avr32/Makefile b/arch/avr32/Makefile index 22fb66590dc..dba48a5d5bb 100644 --- a/arch/avr32/Makefile +++ b/arch/avr32/Makefile @@ -11,7 +11,7 @@ all: uImage vmlinux.elf KBUILD_DEFCONFIG := atstk1002_defconfig -KBUILD_CFLAGS += -pipe -fno-builtin -mno-pic +KBUILD_CFLAGS += -pipe -fno-builtin -mno-pic -D__linux__ KBUILD_AFLAGS += -mrelax -mno-pic KBUILD_CFLAGS_MODULE += -mno-relax LDFLAGS_vmlinux += --relax diff --git a/arch/avr32/boards/mimc200/fram.c b/arch/avr32/boards/mimc200/fram.c index 9764a1a1073..c1466a872b9 100644 --- a/arch/avr32/boards/mimc200/fram.c +++ b/arch/avr32/boards/mimc200/fram.c @@ -11,6 +11,7 @@ #define FRAM_VERSION "1.0" #include <linux/miscdevice.h> +#include <linux/module.h> #include <linux/proc_fs.h> #include <linux/mm.h> #include <linux/io.h> diff --git a/arch/avr32/include/asm/Kbuild b/arch/avr32/include/asm/Kbuild index cfb9fe1b8df..c7c64a63c29 100644 --- a/arch/avr32/include/asm/Kbuild +++ b/arch/avr32/include/asm/Kbuild @@ -17,5 +17,6 @@ generic-y += scatterlist.h generic-y += sections.h generic-y += topology.h generic-y += trace_clock.h +generic-y += vga.h generic-y += xor.h generic-y += hash.h diff --git a/arch/avr32/include/asm/io.h b/arch/avr32/include/asm/io.h index fc6483f83cc..4f5ec2bb717 100644 --- a/arch/avr32/include/asm/io.h +++ b/arch/avr32/include/asm/io.h @@ -295,6 +295,8 @@ extern void __iounmap(void __iomem *addr); #define iounmap(addr) \ __iounmap(addr) +#define ioremap_wc ioremap_nocache + #define cached(addr) P1SEGADDR(addr) #define uncached(addr) P2SEGADDR(addr) diff --git a/arch/ia64/include/asm/unistd.h b/arch/ia64/include/asm/unistd.h index afd45e0d552..ae763d8bf55 100644 --- a/arch/ia64/include/asm/unistd.h +++ b/arch/ia64/include/asm/unistd.h @@ -11,7 +11,7 @@ -#define NR_syscalls 312 /* length of syscall table */ +#define NR_syscalls 314 /* length of syscall table */ /* * The following defines stop scripts/checksyscalls.sh from complaining about diff --git a/arch/ia64/include/uapi/asm/unistd.h b/arch/ia64/include/uapi/asm/unistd.h index 34fd6fe46da..715e85f858d 100644 --- a/arch/ia64/include/uapi/asm/unistd.h +++ b/arch/ia64/include/uapi/asm/unistd.h @@ -325,5 +325,7 @@ #define __NR_process_vm_writev 1333 #define __NR_accept4 1334 #define __NR_finit_module 1335 +#define __NR_sched_setattr 1336 +#define __NR_sched_getattr 1337 #endif /* _UAPI_ASM_IA64_UNISTD_H */ diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S index ddea607f948..fa8d61a312a 100644 --- a/arch/ia64/kernel/entry.S +++ b/arch/ia64/kernel/entry.S @@ -1773,6 +1773,8 @@ sys_call_table: data8 sys_process_vm_writev data8 sys_accept4 data8 sys_finit_module // 1335 + data8 sys_sched_setattr + data8 sys_sched_getattr .org sys_call_table + 8*NR_syscalls // guard against failures to increase NR_syscalls #endif /* __IA64_ASM_PARAVIRTUALIZED_NATIVE */ diff --git a/arch/microblaze/include/asm/delay.h b/arch/microblaze/include/asm/delay.h index 05b7d39e439..66fc24c2423 100644 --- a/arch/microblaze/include/asm/delay.h +++ b/arch/microblaze/include/asm/delay.h @@ -13,6 +13,8 @@ #ifndef _ASM_MICROBLAZE_DELAY_H #define _ASM_MICROBLAZE_DELAY_H +#include <linux/param.h> + extern inline void __delay(unsigned long loops) { asm volatile ("# __delay \n\t" \ diff --git a/arch/microblaze/include/asm/io.h b/arch/microblaze/include/asm/io.h index a2cea720607..3fbb7f1db3b 100644 --- a/arch/microblaze/include/asm/io.h +++ b/arch/microblaze/include/asm/io.h @@ -89,6 +89,11 @@ static inline unsigned int readl(const volatile void __iomem *addr) { return le32_to_cpu(*(volatile unsigned int __force *)addr); } +#define readq readq +static inline u64 readq(const volatile void __iomem *addr) +{ + return le64_to_cpu(__raw_readq(addr)); +} static inline void writeb(unsigned char v, volatile void __iomem *addr) { *(volatile unsigned char __force *)addr = v; @@ -101,6 +106,7 @@ static inline void writel(unsigned int v, volatile void __iomem *addr) { *(volatile unsigned int __force *)addr = cpu_to_le32(v); } +#define writeq(b, addr) __raw_writeq(cpu_to_le64(b), addr) /* ioread and iowrite variants. thease are for now same as __raw_ * variants of accessors. we might check for endianess in the feature diff --git a/arch/microblaze/kernel/head.S b/arch/microblaze/kernel/head.S index b7fb0438458..17645b2e2f0 100644 --- a/arch/microblaze/kernel/head.S +++ b/arch/microblaze/kernel/head.S @@ -66,7 +66,7 @@ real_start: mts rmsr, r0 /* Disable stack protection from bootloader */ mts rslr, r0 - addi r8, r0, 0xFFFFFFF + addi r8, r0, 0xFFFFFFFF mts rshr, r8 /* * According to Xilinx, msrclr instruction behaves like 'mfs rX,rpc' diff --git a/arch/mips/alchemy/devboards/db1000.c b/arch/mips/alchemy/devboards/db1000.c index 11f3ad20321..5483906e0f8 100644 --- a/arch/mips/alchemy/devboards/db1000.c +++ b/arch/mips/alchemy/devboards/db1000.c @@ -534,13 +534,10 @@ static int __init db1000_dev_init(void) s0 = AU1100_GPIO1_INT; s1 = AU1100_GPIO4_INT; + gpio_request(19, "sd0_cd"); + gpio_request(20, "sd1_cd"); gpio_direction_input(19); /* sd0 cd# */ gpio_direction_input(20); /* sd1 cd# */ - gpio_direction_input(21); /* touch pendown# */ - gpio_direction_input(207); /* SPI MISO */ - gpio_direction_output(208, 0); /* SPI MOSI */ - gpio_direction_output(209, 1); /* SPI SCK */ - gpio_direction_output(210, 1); /* SPI CS# */ /* spi_gpio on SSI0 pins */ pfc = __raw_readl((void __iomem *)SYS_PINFUNC); diff --git a/arch/mips/include/asm/fpu.h b/arch/mips/include/asm/fpu.h index cfe092fc720..6b9749540ed 100644 --- a/arch/mips/include/asm/fpu.h +++ b/arch/mips/include/asm/fpu.h @@ -74,6 +74,8 @@ static inline int __enable_fpu(enum fpu_mode mode) default: BUG(); } + + return SIGFPE; } #define __disable_fpu() \ diff --git a/arch/mips/include/uapi/asm/unistd.h b/arch/mips/include/uapi/asm/unistd.h index 1dee279f966..d6e154a9e6a 100644 --- a/arch/mips/include/uapi/asm/unistd.h +++ b/arch/mips/include/uapi/asm/unistd.h @@ -369,16 +369,18 @@ #define __NR_process_vm_writev (__NR_Linux + 346) #define __NR_kcmp (__NR_Linux + 347) #define __NR_finit_module (__NR_Linux + 348) +#define __NR_sched_setattr (__NR_Linux + 349) +#define __NR_sched_getattr (__NR_Linux + 350) /* * Offset of the last Linux o32 flavoured syscall */ -#define __NR_Linux_syscalls 348 +#define __NR_Linux_syscalls 350 #endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */ #define __NR_O32_Linux 4000 -#define __NR_O32_Linux_syscalls 348 +#define __NR_O32_Linux_syscalls 350 #if _MIPS_SIM == _MIPS_SIM_ABI64 @@ -695,16 +697,18 @@ #define __NR_kcmp (__NR_Linux + 306) #define __NR_finit_module (__NR_Linux + 307) #define __NR_getdents64 (__NR_Linux + 308) +#define __NR_sched_setattr (__NR_Linux + 309) +#define __NR_sched_getattr (__NR_Linux + 310) /* * Offset of the last Linux 64-bit flavoured syscall */ -#define __NR_Linux_syscalls 308 +#define __NR_Linux_syscalls 310 #endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */ #define __NR_64_Linux 5000 -#define __NR_64_Linux_syscalls 308 +#define __NR_64_Linux_syscalls 310 #if _MIPS_SIM == _MIPS_SIM_NABI32 @@ -1025,15 +1029,17 @@ #define __NR_process_vm_writev (__NR_Linux + 310) #define __NR_kcmp (__NR_Linux + 311) #define __NR_finit_module (__NR_Linux + 312) +#define __NR_sched_setattr (__NR_Linux + 313) +#define __NR_sched_getattr (__NR_Linux + 314) /* * Offset of the last N32 flavoured syscall */ -#define __NR_Linux_syscalls 312 +#define __NR_Linux_syscalls 314 #endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */ #define __NR_N32_Linux 6000 -#define __NR_N32_Linux_syscalls 312 +#define __NR_N32_Linux_syscalls 314 #endif /* _UAPI_ASM_UNISTD_H */ diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S index e8e541b40d8..a5b14f48e1a 100644 --- a/arch/mips/kernel/scall32-o32.S +++ b/arch/mips/kernel/scall32-o32.S @@ -563,3 +563,5 @@ EXPORT(sys_call_table) PTR sys_process_vm_writev PTR sys_kcmp PTR sys_finit_module + PTR sys_sched_setattr + PTR sys_sched_getattr /* 4350 */ diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S index 57e3742fec5..b56e254beb1 100644 --- a/arch/mips/kernel/scall64-64.S +++ b/arch/mips/kernel/scall64-64.S @@ -425,4 +425,6 @@ EXPORT(sys_call_table) PTR sys_kcmp PTR sys_finit_module PTR sys_getdents64 + PTR sys_sched_setattr + PTR sys_sched_getattr /* 5310 */ .size sys_call_table,.-sys_call_table diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S index 2f48f593439..f7e5b72cf48 100644 --- a/arch/mips/kernel/scall64-n32.S +++ b/arch/mips/kernel/scall64-n32.S @@ -418,4 +418,6 @@ EXPORT(sysn32_call_table) PTR compat_sys_process_vm_writev /* 6310 */ PTR sys_kcmp PTR sys_finit_module + PTR sys_sched_setattr + PTR sys_sched_getattr .size sysn32_call_table,.-sysn32_call_table diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S index f1acdb429f4..6788727d91a 100644 --- a/arch/mips/kernel/scall64-o32.S +++ b/arch/mips/kernel/scall64-o32.S @@ -541,4 +541,6 @@ EXPORT(sys32_call_table) PTR compat_sys_process_vm_writev PTR sys_kcmp PTR sys_finit_module + PTR sys_sched_setattr + PTR sys_sched_getattr /* 4350 */ .size sys32_call_table,.-sys32_call_table diff --git a/arch/parisc/hpux/fs.c b/arch/parisc/hpux/fs.c index 88d0962de65..2bedafea3d9 100644 --- a/arch/parisc/hpux/fs.c +++ b/arch/parisc/hpux/fs.c @@ -33,22 +33,9 @@ int hpux_execve(struct pt_regs *regs) { - int error; - struct filename *filename; - - filename = getname((const char __user *) regs->gr[26]); - error = PTR_ERR(filename); - if (IS_ERR(filename)) - goto out; - - error = do_execve(filename->name, + return do_execve(getname((const char __user *) regs->gr[26]), (const char __user *const __user *) regs->gr[25], (const char __user *const __user *) regs->gr[24]); - - putname(filename); - -out: - return error; } struct hpux_dirent { diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h index e27e9ad6818..150866b2a3f 100644 --- a/arch/powerpc/include/asm/dma-mapping.h +++ b/arch/powerpc/include/asm/dma-mapping.h @@ -134,6 +134,7 @@ static inline int dma_supported(struct device *dev, u64 mask) } extern int dma_set_mask(struct device *dev, u64 dma_mask); +extern int __dma_set_mask(struct device *dev, u64 dma_mask); #define dma_alloc_coherent(d,s,h,f) dma_alloc_attrs(d,s,h,f,NULL) diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h index 9e39ceb1d19..d4dd41fb951 100644 --- a/arch/powerpc/include/asm/eeh.h +++ b/arch/powerpc/include/asm/eeh.h @@ -172,10 +172,20 @@ struct eeh_ops { }; extern struct eeh_ops *eeh_ops; -extern int eeh_subsystem_enabled; +extern bool eeh_subsystem_enabled; extern raw_spinlock_t confirm_error_lock; extern int eeh_probe_mode; +static inline bool eeh_enabled(void) +{ + return eeh_subsystem_enabled; +} + +static inline void eeh_set_enable(bool mode) +{ + eeh_subsystem_enabled = mode; +} + #define EEH_PROBE_MODE_DEV (1<<0) /* From PCI device */ #define EEH_PROBE_MODE_DEVTREE (1<<1) /* From device tree */ @@ -246,7 +256,7 @@ void eeh_remove_device(struct pci_dev *); * If this macro yields TRUE, the caller relays to eeh_check_failure() * which does further tests out of line. */ -#define EEH_POSSIBLE_ERROR(val, type) ((val) == (type)~0 && eeh_subsystem_enabled) +#define EEH_POSSIBLE_ERROR(val, type) ((val) == (type)~0 && eeh_enabled()) /* * Reads from a device which has been isolated by EEH will return @@ -257,6 +267,13 @@ void eeh_remove_device(struct pci_dev *); #else /* !CONFIG_EEH */ +static inline bool eeh_enabled(void) +{ + return false; +} + +static inline void eeh_set_enable(bool mode) { } + static inline int eeh_init(void) { return 0; diff --git a/arch/powerpc/include/asm/hugetlb.h b/arch/powerpc/include/asm/hugetlb.h index d750336b171..623f2971ce0 100644 --- a/arch/powerpc/include/asm/hugetlb.h +++ b/arch/powerpc/include/asm/hugetlb.h @@ -127,7 +127,7 @@ static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) { #ifdef CONFIG_PPC64 - return __pte(pte_update(mm, addr, ptep, ~0UL, 1)); + return __pte(pte_update(mm, addr, ptep, ~0UL, 0, 1)); #else return __pte(pte_update(ptep, ~0UL, 0)); #endif diff --git a/arch/powerpc/include/asm/iommu.h b/arch/powerpc/include/asm/iommu.h index f7a8036579b..42632c7a2a4 100644 --- a/arch/powerpc/include/asm/iommu.h +++ b/arch/powerpc/include/asm/iommu.h @@ -77,6 +77,7 @@ struct iommu_table { #ifdef CONFIG_IOMMU_API struct iommu_group *it_group; #endif + void (*set_bypass)(struct iommu_table *tbl, bool enable); }; /* Pure 2^n version of get_order */ diff --git a/arch/powerpc/include/asm/pgtable-ppc64.h b/arch/powerpc/include/asm/pgtable-ppc64.h index bc141c950b1..eb9261024f5 100644 --- a/arch/powerpc/include/asm/pgtable-ppc64.h +++ b/arch/powerpc/include/asm/pgtable-ppc64.h @@ -195,6 +195,7 @@ extern void hpte_need_flush(struct mm_struct *mm, unsigned long addr, static inline unsigned long pte_update(struct mm_struct *mm, unsigned long addr, pte_t *ptep, unsigned long clr, + unsigned long set, int huge) { #ifdef PTE_ATOMIC_UPDATES @@ -205,14 +206,15 @@ static inline unsigned long pte_update(struct mm_struct *mm, andi. %1,%0,%6\n\ bne- 1b \n\ andc %1,%0,%4 \n\ + or %1,%1,%7\n\ stdcx. %1,0,%3 \n\ bne- 1b" : "=&r" (old), "=&r" (tmp), "=m" (*ptep) - : "r" (ptep), "r" (clr), "m" (*ptep), "i" (_PAGE_BUSY) + : "r" (ptep), "r" (clr), "m" (*ptep), "i" (_PAGE_BUSY), "r" (set) : "cc" ); #else unsigned long old = pte_val(*ptep); - *ptep = __pte(old & ~clr); + *ptep = __pte((old & ~clr) | set); #endif /* huge pages use the old page table lock */ if (!huge) @@ -231,9 +233,9 @@ static inline int __ptep_test_and_clear_young(struct mm_struct *mm, { unsigned long old; - if ((pte_val(*ptep) & (_PAGE_ACCESSED | _PAGE_HASHPTE)) == 0) + if ((pte_val(*ptep) & (_PAGE_ACCESSED | _PAGE_HASHPTE)) == 0) return 0; - old = pte_update(mm, addr, ptep, _PAGE_ACCESSED, 0); + old = pte_update(mm, addr, ptep, _PAGE_ACCESSED, 0, 0); return (old & _PAGE_ACCESSED) != 0; } #define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG @@ -252,7 +254,7 @@ static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, if ((pte_val(*ptep) & _PAGE_RW) == 0) return; - pte_update(mm, addr, ptep, _PAGE_RW, 0); + pte_update(mm, addr, ptep, _PAGE_RW, 0, 0); } static inline void huge_ptep_set_wrprotect(struct mm_struct *mm, @@ -261,7 +263,7 @@ static inline void huge_ptep_set_wrprotect(struct mm_struct *mm, if ((pte_val(*ptep) & _PAGE_RW) == 0) return; - pte_update(mm, addr, ptep, _PAGE_RW, 1); + pte_update(mm, addr, ptep, _PAGE_RW, 0, 1); } /* @@ -284,14 +286,14 @@ static inline void huge_ptep_set_wrprotect(struct mm_struct *mm, static inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) { - unsigned long old = pte_update(mm, addr, ptep, ~0UL, 0); + unsigned long old = pte_update(mm, addr, ptep, ~0UL, 0, 0); return __pte(old); } static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t * ptep) { - pte_update(mm, addr, ptep, ~0UL, 0); + pte_update(mm, addr, ptep, ~0UL, 0, 0); } @@ -506,7 +508,9 @@ extern int pmdp_set_access_flags(struct vm_area_struct *vma, extern unsigned long pmd_hugepage_update(struct mm_struct *mm, unsigned long addr, - pmd_t *pmdp, unsigned long clr); + pmd_t *pmdp, + unsigned long clr, + unsigned long set); static inline int __pmdp_test_and_clear_young(struct mm_struct *mm, unsigned long addr, pmd_t *pmdp) @@ -515,7 +519,7 @@ static inline int __pmdp_test_and_clear_young(struct mm_struct *mm, if ((pmd_val(*pmdp) & (_PAGE_ACCESSED | _PAGE_HASHPTE)) == 0) return 0; - old = pmd_hugepage_update(mm, addr, pmdp, _PAGE_ACCESSED); + old = pmd_hugepage_update(mm, addr, pmdp, _PAGE_ACCESSED, 0); return ((old & _PAGE_ACCESSED) != 0); } @@ -542,7 +546,7 @@ static inline void pmdp_set_wrprotect(struct mm_struct *mm, unsigned long addr, if ((pmd_val(*pmdp) & _PAGE_RW) == 0) return; - pmd_hugepage_update(mm, addr, pmdp, _PAGE_RW); + pmd_hugepage_update(mm, addr, pmdp, _PAGE_RW, 0); } #define __HAVE_ARCH_PMDP_SPLITTING_FLUSH diff --git a/arch/powerpc/include/asm/pgtable.h b/arch/powerpc/include/asm/pgtable.h index f83b6f3e1b3..3ebb188c3ff 100644 --- a/arch/powerpc/include/asm/pgtable.h +++ b/arch/powerpc/include/asm/pgtable.h @@ -75,12 +75,34 @@ static inline pte_t pte_mknuma(pte_t pte) return pte; } +#define ptep_set_numa ptep_set_numa +static inline void ptep_set_numa(struct mm_struct *mm, unsigned long addr, + pte_t *ptep) +{ + if ((pte_val(*ptep) & _PAGE_PRESENT) == 0) + VM_BUG_ON(1); + + pte_update(mm, addr, ptep, _PAGE_PRESENT, _PAGE_NUMA, 0); + return; +} + #define pmd_numa pmd_numa static inline int pmd_numa(pmd_t pmd) { return pte_numa(pmd_pte(pmd)); } +#define pmdp_set_numa pmdp_set_numa +static inline void pmdp_set_numa(struct mm_struct *mm, unsigned long addr, + pmd_t *pmdp) +{ + if ((pmd_val(*pmdp) & _PAGE_PRESENT) == 0) + VM_BUG_ON(1); + + pmd_hugepage_update(mm, addr, pmdp, _PAGE_PRESENT, _PAGE_NUMA); + return; +} + #define pmd_mknonnuma pmd_mknonnuma static inline pmd_t pmd_mknonnuma(pmd_t pmd) { diff --git a/arch/powerpc/include/asm/sections.h b/arch/powerpc/include/asm/sections.h index 4ee06fe15de..d0e784e0ff4 100644 --- a/arch/powerpc/include/asm/sections.h +++ b/arch/powerpc/include/asm/sections.h @@ -8,6 +8,7 @@ #ifdef __powerpc64__ +extern char __start_interrupts[]; extern char __end_interrupts[]; extern char __prom_init_toc_start[]; @@ -21,6 +22,17 @@ static inline int in_kernel_text(unsigned long addr) return 0; } +static inline int overlaps_interrupt_vector_text(unsigned long start, + unsigned long end) +{ + unsigned long real_start, real_end; + real_start = __start_interrupts - _stext; + real_end = __end_interrupts - _stext; + + return start < (unsigned long)__va(real_end) && + (unsigned long)__va(real_start) < end; +} + static inline int overlaps_kernel_text(unsigned long start, unsigned long end) { return start < (unsigned long)__init_end && diff --git a/arch/powerpc/include/asm/vdso.h b/arch/powerpc/include/asm/vdso.h index 0d9cecddf8a..c53f5f6d176 100644 --- a/arch/powerpc/include/asm/vdso.h +++ b/arch/powerpc/include/asm/vdso.h @@ -4,11 +4,11 @@ #ifdef __KERNEL__ /* Default link addresses for the vDSOs */ -#define VDSO32_LBASE 0x100000 -#define VDSO64_LBASE 0x100000 +#define VDSO32_LBASE 0x0 +#define VDSO64_LBASE 0x0 /* Default map addresses for 32bit vDSO */ -#define VDSO32_MBASE VDSO32_LBASE +#define VDSO32_MBASE 0x100000 #define VDSO_VERSION_STRING LINUX_2.6.15 diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c index 8032b97ccdc..ee78f6e49d6 100644 --- a/arch/powerpc/kernel/dma.c +++ b/arch/powerpc/kernel/dma.c @@ -191,12 +191,10 @@ EXPORT_SYMBOL(dma_direct_ops); #define PREALLOC_DMA_DEBUG_ENTRIES (1 << 16) -int dma_set_mask(struct device *dev, u64 dma_mask) +int __dma_set_mask(struct device *dev, u64 dma_mask) { struct dma_map_ops *dma_ops = get_dma_ops(dev); - if (ppc_md.dma_set_mask) - return ppc_md.dma_set_mask(dev, dma_mask); if ((dma_ops != NULL) && (dma_ops->set_dma_mask != NULL)) return dma_ops->set_dma_mask(dev, dma_mask); if (!dev->dma_mask || !dma_supported(dev, dma_mask)) @@ -204,6 +202,12 @@ int dma_set_mask(struct device *dev, u64 dma_mask) *dev->dma_mask = dma_mask; return 0; } +int dma_set_mask(struct device *dev, u64 dma_mask) +{ + if (ppc_md.dma_set_mask) + return ppc_md.dma_set_mask(dev, dma_mask); + return __dma_set_mask(dev, dma_mask); +} EXPORT_SYMBOL(dma_set_mask); u64 dma_get_required_mask(struct device *dev) diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c index 148db72a8c4..e7b76a6bf15 100644 --- a/arch/powerpc/kernel/eeh.c +++ b/arch/powerpc/kernel/eeh.c @@ -28,6 +28,7 @@ #include <linux/pci.h> #include <linux/proc_fs.h> #include <linux/rbtree.h> +#include <linux/reboot.h> #include <linux/seq_file.h> #include <linux/spinlock.h> #include <linux/export.h> @@ -89,7 +90,7 @@ /* Platform dependent EEH operations */ struct eeh_ops *eeh_ops = NULL; -int eeh_subsystem_enabled; +bool eeh_subsystem_enabled = false; EXPORT_SYMBOL(eeh_subsystem_enabled); /* @@ -364,7 +365,7 @@ int eeh_dev_check_failure(struct eeh_dev *edev) eeh_stats.total_mmio_ffs++; - if (!eeh_subsystem_enabled) + if (!eeh_enabled()) return 0; if (!edev) { @@ -747,6 +748,17 @@ int __exit eeh_ops_unregister(const char *name) return -EEXIST; } +static int eeh_reboot_notifier(struct notifier_block *nb, + unsigned long action, void *unused) +{ + eeh_set_enable(false); + return NOTIFY_DONE; +} + +static struct notifier_block eeh_reboot_nb = { + .notifier_call = eeh_reboot_notifier, +}; + /** * eeh_init - EEH initialization * @@ -778,6 +790,14 @@ int eeh_init(void) if (machine_is(powernv) && cnt++ <= 0) return ret; + /* Register reboot notifier */ + ret = register_reboot_notifier(&eeh_reboot_nb); + if (ret) { + pr_warn("%s: Failed to register notifier (%d)\n", + __func__, ret); + return ret; + } + /* call platform initialization function */ if (!eeh_ops) { pr_warning("%s: Platform EEH operation not found\n", @@ -822,7 +842,7 @@ int eeh_init(void) return ret; } - if (eeh_subsystem_enabled) + if (eeh_enabled()) pr_info("EEH: PCI Enhanced I/O Error Handling Enabled\n"); else pr_warning("EEH: No capable adapters found\n"); @@ -897,7 +917,7 @@ void eeh_add_device_late(struct pci_dev *dev) struct device_node *dn; struct eeh_dev *edev; - if (!dev || !eeh_subsystem_enabled) + if (!dev || !eeh_enabled()) return; pr_debug("EEH: Adding device %s\n", pci_name(dev)); @@ -1005,7 +1025,7 @@ void eeh_remove_device(struct pci_dev *dev) { struct eeh_dev *edev; - if (!dev || !eeh_subsystem_enabled) + if (!dev || !eeh_enabled()) return; edev = pci_dev_to_eeh_dev(dev); @@ -1045,7 +1065,7 @@ void eeh_remove_device(struct pci_dev *dev) static int proc_eeh_show(struct seq_file *m, void *v) { - if (0 == eeh_subsystem_enabled) { + if (!eeh_enabled()) { seq_printf(m, "EEH Subsystem is globally disabled\n"); seq_printf(m, "eeh_total_mmio_ffs=%llu\n", eeh_stats.total_mmio_ffs); } else { diff --git a/arch/powerpc/kernel/eeh_driver.c b/arch/powerpc/kernel/eeh_driver.c index 7bb30dca4e1..fdc679d309e 100644 --- a/arch/powerpc/kernel/eeh_driver.c +++ b/arch/powerpc/kernel/eeh_driver.c @@ -362,9 +362,13 @@ static void *eeh_rmv_device(void *data, void *userdata) */ if (!dev || (dev->hdr_type & PCI_HEADER_TYPE_BRIDGE)) return NULL; + driver = eeh_pcid_get(dev); - if (driver && driver->err_handler) - return NULL; + if (driver) { + eeh_pcid_put(dev); + if (driver->err_handler) + return NULL; + } /* Remove it from PCI subsystem */ pr_debug("EEH: Removing %s without EEH sensitive driver\n", diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c index d773dd440a4..88e3ec6e1d9 100644 --- a/arch/powerpc/kernel/iommu.c +++ b/arch/powerpc/kernel/iommu.c @@ -1088,6 +1088,14 @@ int iommu_take_ownership(struct iommu_table *tbl) memset(tbl->it_map, 0xff, sz); iommu_clear_tces_and_put_pages(tbl, tbl->it_offset, tbl->it_size); + /* + * Disable iommu bypass, otherwise the user can DMA to all of + * our physical memory via the bypass window instead of just + * the pages that has been explicitly mapped into the iommu + */ + if (tbl->set_bypass) + tbl->set_bypass(tbl, false); + return 0; } EXPORT_SYMBOL_GPL(iommu_take_ownership); @@ -1102,6 +1110,10 @@ void iommu_release_ownership(struct iommu_table *tbl) /* Restore bit#0 set by iommu_init_table() */ if (tbl->it_offset == 0) set_bit(0, tbl->it_map); + + /* The kernel owns the device now, we can restore the iommu bypass */ + if (tbl->set_bypass) + tbl->set_bypass(tbl, true); } EXPORT_SYMBOL_GPL(iommu_release_ownership); diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 9729b23bfb0..1d0848bba04 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -559,8 +559,13 @@ void exc_lvl_ctx_init(void) #ifdef CONFIG_PPC64 cpu_nr = i; #else +#ifdef CONFIG_SMP cpu_nr = get_hard_smp_processor_id(i); +#else + cpu_nr = 0; #endif +#endif + memset((void *)critirq_ctx[cpu_nr], 0, THREAD_SIZE); tp = critirq_ctx[cpu_nr]; tp->cpu = cpu_nr; diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c index 75d4f7340da..015ae55c186 100644 --- a/arch/powerpc/kernel/machine_kexec.c +++ b/arch/powerpc/kernel/machine_kexec.c @@ -196,7 +196,9 @@ int overlaps_crashkernel(unsigned long start, unsigned long size) /* Values we need to export to the second kernel via the device tree. */ static phys_addr_t kernel_end; +static phys_addr_t crashk_base; static phys_addr_t crashk_size; +static unsigned long long mem_limit; static struct property kernel_end_prop = { .name = "linux,kernel-end", @@ -207,7 +209,7 @@ static struct property kernel_end_prop = { static struct property crashk_base_prop = { .name = "linux,crashkernel-base", .length = sizeof(phys_addr_t), - .value = &crashk_res.start, + .value = &crashk_base }; static struct property crashk_size_prop = { @@ -219,9 +221,11 @@ static struct property crashk_size_prop = { static struct property memory_limit_prop = { .name = "linux,memory-limit", .length = sizeof(unsigned long long), - .value = &memory_limit, + .value = &mem_limit, }; +#define cpu_to_be_ulong __PASTE(cpu_to_be, BITS_PER_LONG) + static void __init export_crashk_values(struct device_node *node) { struct property *prop; @@ -237,8 +241,9 @@ static void __init export_crashk_values(struct device_node *node) of_remove_property(node, prop); if (crashk_res.start != 0) { + crashk_base = cpu_to_be_ulong(crashk_res.start), of_add_property(node, &crashk_base_prop); - crashk_size = resource_size(&crashk_res); + crashk_size = cpu_to_be_ulong(resource_size(&crashk_res)); of_add_property(node, &crashk_size_prop); } @@ -246,6 +251,7 @@ static void __init export_crashk_values(struct device_node *node) * memory_limit is required by the kexec-tools to limit the * crash regions to the actual memory used. */ + mem_limit = cpu_to_be_ulong(memory_limit); of_update_property(node, &memory_limit_prop); } @@ -264,7 +270,7 @@ static int __init kexec_setup(void) of_remove_property(node, prop); /* information needed by userspace when using default_machine_kexec */ - kernel_end = __pa(_end); + kernel_end = cpu_to_be_ulong(__pa(_end)); of_add_property(node, &kernel_end_prop); export_crashk_values(node); diff --git a/arch/powerpc/kernel/machine_kexec_64.c b/arch/powerpc/kernel/machine_kexec_64.c index be4e6d648f6..59d229a2a3e 100644 --- a/arch/powerpc/kernel/machine_kexec_64.c +++ b/arch/powerpc/kernel/machine_kexec_64.c @@ -369,6 +369,7 @@ void default_machine_kexec(struct kimage *image) /* Values we need to export to the second kernel via the device tree. */ static unsigned long htab_base; +static unsigned long htab_size; static struct property htab_base_prop = { .name = "linux,htab-base", @@ -379,7 +380,7 @@ static struct property htab_base_prop = { static struct property htab_size_prop = { .name = "linux,htab-size", .length = sizeof(unsigned long), - .value = &htab_size_bytes, + .value = &htab_size, }; static int __init export_htab_values(void) @@ -403,8 +404,9 @@ static int __init export_htab_values(void) if (prop) of_remove_property(node, prop); - htab_base = __pa(htab_address); + htab_base = cpu_to_be64(__pa(htab_address)); of_add_property(node, &htab_base_prop); + htab_size = cpu_to_be64(htab_size_bytes); of_add_property(node, &htab_size_prop); of_node_put(node); diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S index 879f09620f8..7c6bb4b17b4 100644 --- a/arch/powerpc/kernel/misc_32.S +++ b/arch/powerpc/kernel/misc_32.S @@ -57,11 +57,14 @@ _GLOBAL(call_do_softirq) mtlr r0 blr +/* + * void call_do_irq(struct pt_regs *regs, struct thread_info *irqtp); + */ _GLOBAL(call_do_irq) mflr r0 stw r0,4(r1) lwz r10,THREAD+KSP_LIMIT(r2) - addi r11,r3,THREAD_INFO_GAP + addi r11,r4,THREAD_INFO_GAP stwu r1,THREAD_SIZE-STACK_FRAME_OVERHEAD(r4) mr r1,r4 stw r10,8(r1) diff --git a/arch/powerpc/kernel/reloc_64.S b/arch/powerpc/kernel/reloc_64.S index b47a0e1ab00..1482327cfeb 100644 --- a/arch/powerpc/kernel/reloc_64.S +++ b/arch/powerpc/kernel/reloc_64.S @@ -69,8 +69,8 @@ _GLOBAL(relocate) * R_PPC64_RELATIVE ones. */ mtctr r8 -5: lwz r0,12(9) /* ELF64_R_TYPE(reloc->r_info) */ - cmpwi r0,R_PPC64_RELATIVE +5: ld r0,8(9) /* ELF64_R_TYPE(reloc->r_info) */ + cmpdi r0,R_PPC64_RELATIVE bne 6f ld r6,0(r9) /* reloc->r_offset */ ld r0,16(r9) /* reloc->r_addend */ diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index 2b0da27eaee..04cc4fcca78 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -247,7 +247,12 @@ static void __init exc_lvl_early_init(void) /* interrupt stacks must be in lowmem, we get that for free on ppc32 * as the memblock is limited to lowmem by MEMBLOCK_REAL_LIMIT */ for_each_possible_cpu(i) { +#ifdef CONFIG_SMP hw_cpu = get_hard_smp_processor_id(i); +#else + hw_cpu = 0; +#endif + critirq_ctx[hw_cpu] = (struct thread_info *) __va(memblock_alloc(THREAD_SIZE, THREAD_SIZE)); #ifdef CONFIG_BOOKE diff --git a/arch/powerpc/kernel/vdso32/vdso32_wrapper.S b/arch/powerpc/kernel/vdso32/vdso32_wrapper.S index 79683d0393f..6ac107ac402 100644 --- a/arch/powerpc/kernel/vdso32/vdso32_wrapper.S +++ b/arch/powerpc/kernel/vdso32/vdso32_wrapper.S @@ -6,7 +6,7 @@ .globl vdso32_start, vdso32_end .balign PAGE_SIZE vdso32_start: - .incbin "arch/powerpc/kernel/vdso32/vdso32.so" + .incbin "arch/powerpc/kernel/vdso32/vdso32.so.dbg" .balign PAGE_SIZE vdso32_end: diff --git a/arch/powerpc/kernel/vdso64/vdso64_wrapper.S b/arch/powerpc/kernel/vdso64/vdso64_wrapper.S index 8df9e246300..df60fca6a13 100644 --- a/arch/powerpc/kernel/vdso64/vdso64_wrapper.S +++ b/arch/powerpc/kernel/vdso64/vdso64_wrapper.S @@ -6,7 +6,7 @@ .globl vdso64_start, vdso64_end .balign PAGE_SIZE vdso64_start: - .incbin "arch/powerpc/kernel/vdso64/vdso64.so" + .incbin "arch/powerpc/kernel/vdso64/vdso64.so.dbg" .balign PAGE_SIZE vdso64_end: diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index de6881259ae..d766d6ee33f 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -207,6 +207,20 @@ int htab_bolt_mapping(unsigned long vstart, unsigned long vend, if (overlaps_kernel_text(vaddr, vaddr + step)) tprot &= ~HPTE_R_N; + /* + * If relocatable, check if it overlaps interrupt vectors that + * are copied down to real 0. For relocatable kernel + * (e.g. kdump case) we copy interrupt vectors down to real + * address 0. Mark that region as executable. This is + * because on p8 system with relocation on exception feature + * enabled, exceptions are raised with MMU (IR=DR=1) ON. Hence + * in order to execute the interrupt handlers in virtual + * mode the vector region need to be marked as executable. + */ + if ((PHYSICAL_START > MEMORY_START) && + overlaps_interrupt_vector_text(vaddr, vaddr + step)) + tprot &= ~HPTE_R_N; + hash = hpt_hash(vpn, shift, ssize); hpteg = ((hash & htab_hash_mask) * HPTES_PER_GROUP); diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c index 65b7b65e870..62bf5e8e78d 100644 --- a/arch/powerpc/mm/pgtable_64.c +++ b/arch/powerpc/mm/pgtable_64.c @@ -510,7 +510,8 @@ int pmdp_set_access_flags(struct vm_area_struct *vma, unsigned long address, } unsigned long pmd_hugepage_update(struct mm_struct *mm, unsigned long addr, - pmd_t *pmdp, unsigned long clr) + pmd_t *pmdp, unsigned long clr, + unsigned long set) { unsigned long old, tmp; @@ -526,14 +527,15 @@ unsigned long pmd_hugepage_update(struct mm_struct *mm, unsigned long addr, andi. %1,%0,%6\n\ bne- 1b \n\ andc %1,%0,%4 \n\ + or %1,%1,%7\n\ stdcx. %1,0,%3 \n\ bne- 1b" : "=&r" (old), "=&r" (tmp), "=m" (*pmdp) - : "r" (pmdp), "r" (clr), "m" (*pmdp), "i" (_PAGE_BUSY) + : "r" (pmdp), "r" (clr), "m" (*pmdp), "i" (_PAGE_BUSY), "r" (set) : "cc" ); #else old = pmd_val(*pmdp); - *pmdp = __pmd(old & ~clr); + *pmdp = __pmd((old & ~clr) | set); #endif if (old & _PAGE_HASHPTE) hpte_do_hugepage_flush(mm, addr, pmdp); @@ -708,7 +710,7 @@ void set_pmd_at(struct mm_struct *mm, unsigned long addr, void pmdp_invalidate(struct vm_area_struct *vma, unsigned long address, pmd_t *pmdp) { - pmd_hugepage_update(vma->vm_mm, address, pmdp, _PAGE_PRESENT); + pmd_hugepage_update(vma->vm_mm, address, pmdp, _PAGE_PRESENT, 0); } /* @@ -835,7 +837,7 @@ pmd_t pmdp_get_and_clear(struct mm_struct *mm, unsigned long old; pgtable_t *pgtable_slot; - old = pmd_hugepage_update(mm, addr, pmdp, ~0UL); + old = pmd_hugepage_update(mm, addr, pmdp, ~0UL, 0); old_pmd = __pmd(old); /* * We have pmd == none and we are holding page_table_lock. diff --git a/arch/powerpc/mm/subpage-prot.c b/arch/powerpc/mm/subpage-prot.c index a770df2dae7..6c0b1f5f8d2 100644 --- a/arch/powerpc/mm/subpage-prot.c +++ b/arch/powerpc/mm/subpage-prot.c @@ -78,7 +78,7 @@ static void hpte_flush_range(struct mm_struct *mm, unsigned long addr, pte = pte_offset_map_lock(mm, pmd, addr, &ptl); arch_enter_lazy_mmu_mode(); for (; npages > 0; --npages) { - pte_update(mm, addr, pte, 0, 0); + pte_update(mm, addr, pte, 0, 0, 0); addr += PAGE_SIZE; ++pte; } diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c index 29b89e863d7..67cf22083f4 100644 --- a/arch/powerpc/perf/core-book3s.c +++ b/arch/powerpc/perf/core-book3s.c @@ -1147,6 +1147,9 @@ static void power_pmu_enable(struct pmu *pmu) mmcr0 = ebb_switch_in(ebb, cpuhw->mmcr[0]); mb(); + if (cpuhw->bhrb_users) + ppmu->config_bhrb(cpuhw->bhrb_filter); + write_mmcr0(cpuhw, mmcr0); /* @@ -1158,8 +1161,6 @@ static void power_pmu_enable(struct pmu *pmu) } out: - if (cpuhw->bhrb_users) - ppmu->config_bhrb(cpuhw->bhrb_filter); local_irq_restore(flags); } diff --git a/arch/powerpc/perf/power8-pmu.c b/arch/powerpc/perf/power8-pmu.c index a3f7abd2f13..96cee20dcd3 100644 --- a/arch/powerpc/perf/power8-pmu.c +++ b/arch/powerpc/perf/power8-pmu.c @@ -25,6 +25,37 @@ #define PM_BRU_FIN 0x10068 #define PM_BR_MPRED_CMPL 0x400f6 +/* All L1 D cache load references counted at finish, gated by reject */ +#define PM_LD_REF_L1 0x100ee +/* Load Missed L1 */ +#define PM_LD_MISS_L1 0x3e054 +/* Store Missed L1 */ +#define PM_ST_MISS_L1 0x300f0 +/* L1 cache data prefetches */ +#define PM_L1_PREF 0x0d8b8 +/* Instruction fetches from L1 */ +#define PM_INST_FROM_L1 0x04080 +/* Demand iCache Miss */ +#define PM_L1_ICACHE_MISS 0x200fd +/* Instruction Demand sectors wriittent into IL1 */ +#define PM_L1_DEMAND_WRITE 0x0408c +/* Instruction prefetch written into IL1 */ +#define PM_IC_PREF_WRITE 0x0408e +/* The data cache was reloaded from local core's L3 due to a demand load */ +#define PM_DATA_FROM_L3 0x4c042 +/* Demand LD - L3 Miss (not L2 hit and not L3 hit) */ +#define PM_DATA_FROM_L3MISS 0x300fe +/* All successful D-side store dispatches for this thread */ +#define PM_L2_ST 0x17080 +/* All successful D-side store dispatches for this thread that were L2 Miss */ +#define PM_L2_ST_MISS 0x17082 +/* Total HW L3 prefetches(Load+store) */ +#define PM_L3_PREF_ALL 0x4e052 +/* Data PTEG reload */ +#define PM_DTLB_MISS 0x300fc +/* ITLB Reloaded */ +#define PM_ITLB_MISS 0x400fc + /* * Raw event encoding for POWER8: @@ -557,6 +588,8 @@ static int power8_generic_events[] = { [PERF_COUNT_HW_INSTRUCTIONS] = PM_INST_CMPL, [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = PM_BRU_FIN, [PERF_COUNT_HW_BRANCH_MISSES] = PM_BR_MPRED_CMPL, + [PERF_COUNT_HW_CACHE_REFERENCES] = PM_LD_REF_L1, + [PERF_COUNT_HW_CACHE_MISSES] = PM_LD_MISS_L1, }; static u64 power8_bhrb_filter_map(u64 branch_sample_type) @@ -596,6 +629,116 @@ static void power8_config_bhrb(u64 pmu_bhrb_filter) mtspr(SPRN_MMCRA, (mfspr(SPRN_MMCRA) | pmu_bhrb_filter)); } +#define C(x) PERF_COUNT_HW_CACHE_##x + +/* + * Table of generalized cache-related events. + * 0 means not supported, -1 means nonsensical, other values + * are event codes. + */ +static int power8_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = { + [ C(L1D) ] = { + [ C(OP_READ) ] = { + [ C(RESULT_ACCESS) ] = PM_LD_REF_L1, + [ C(RESULT_MISS) ] = PM_LD_MISS_L1, + }, + [ C(OP_WRITE) ] = { + [ C(RESULT_ACCESS) ] = 0, + [ C(RESULT_MISS) ] = PM_ST_MISS_L1, + }, + [ C(OP_PREFETCH) ] = { + [ C(RESULT_ACCESS) ] = PM_L1_PREF, + [ C(RESULT_MISS) ] = 0, + }, + }, + [ C(L1I) ] = { + [ C(OP_READ) ] = { + [ C(RESULT_ACCESS) ] = PM_INST_FROM_L1, + [ C(RESULT_MISS) ] = PM_L1_ICACHE_MISS, + }, + [ C(OP_WRITE) ] = { + [ C(RESULT_ACCESS) ] = PM_L1_DEMAND_WRITE, + [ C(RESULT_MISS) ] = -1, + }, + [ C(OP_PREFETCH) ] = { + [ C(RESULT_ACCESS) ] = PM_IC_PREF_WRITE, + [ C(RESULT_MISS) ] = 0, + }, + }, + [ C(LL) ] = { + [ C(OP_READ) ] = { + [ C(RESULT_ACCESS) ] = PM_DATA_FROM_L3, + [ C(RESULT_MISS) ] = PM_DATA_FROM_L3MISS, + }, + [ C(OP_WRITE) ] = { + [ C(RESULT_ACCESS) ] = PM_L2_ST, + [ C(RESULT_MISS) ] = PM_L2_ST_MISS, + }, + [ C(OP_PREFETCH) ] = { + [ C(RESULT_ACCESS) ] = PM_L3_PREF_ALL, + [ C(RESULT_MISS) ] = 0, + }, + }, + [ C(DTLB) ] = { + [ C(OP_READ) ] = { + [ C(RESULT_ACCESS) ] = 0, + [ C(RESULT_MISS) ] = PM_DTLB_MISS, + }, + [ C(OP_WRITE) ] = { + [ C(RESULT_ACCESS) ] = -1, + [ C(RESULT_MISS) ] = -1, + }, + [ C(OP_PREFETCH) ] = { + [ C(RESULT_ACCESS) ] = -1, + [ C(RESULT_MISS) ] = -1, + }, + }, + [ C(ITLB) ] = { + [ C(OP_READ) ] = { + [ C(RESULT_ACCESS) ] = 0, + [ C(RESULT_MISS) ] = PM_ITLB_MISS, + }, + [ C(OP_WRITE) ] = { + [ C(RESULT_ACCESS) ] = -1, + [ C(RESULT_MISS) ] = -1, + }, + [ C(OP_PREFETCH) ] = { + [ C(RESULT_ACCESS) ] = -1, + [ C(RESULT_MISS) ] = -1, + }, + }, + [ C(BPU) ] = { + [ C(OP_READ) ] = { + [ C(RESULT_ACCESS) ] = PM_BRU_FIN, + [ C(RESULT_MISS) ] = PM_BR_MPRED_CMPL, + }, + [ C(OP_WRITE) ] = { + [ C(RESULT_ACCESS) ] = -1, + [ C(RESULT_MISS) ] = -1, + }, + [ C(OP_PREFETCH) ] = { + [ C(RESULT_ACCESS) ] = -1, + [ C(RESULT_MISS) ] = -1, + }, + }, + [ C(NODE) ] = { + [ C(OP_READ) ] = { + [ C(RESULT_ACCESS) ] = -1, + [ C(RESULT_MISS) ] = -1, + }, + [ C(OP_WRITE) ] = { + [ C(RESULT_ACCESS) ] = -1, + [ C(RESULT_MISS) ] = -1, + }, + [ C(OP_PREFETCH) ] = { + [ C(RESULT_ACCESS) ] = -1, + [ C(RESULT_MISS) ] = -1, + }, + }, +}; + +#undef C + static struct power_pmu power8_pmu = { .name = "POWER8", .n_counter = 6, @@ -611,6 +754,7 @@ static struct power_pmu power8_pmu = { .flags = PPMU_HAS_SSLOT | PPMU_HAS_SIER | PPMU_BHRB | PPMU_EBB, .n_generic = ARRAY_SIZE(power8_generic_events), .generic_events = power8_generic_events, + .cache_events = &power8_cache_events, .attr_groups = power8_pmu_attr_groups, .bhrb_nr = 32, }; diff --git a/arch/powerpc/platforms/powernv/eeh-ioda.c b/arch/powerpc/platforms/powernv/eeh-ioda.c index e1e71618b70..f5147433646 100644 --- a/arch/powerpc/platforms/powernv/eeh-ioda.c +++ b/arch/powerpc/platforms/powernv/eeh-ioda.c @@ -44,7 +44,8 @@ static int ioda_eeh_event(struct notifier_block *nb, /* We simply send special EEH event */ if ((changed_evts & OPAL_EVENT_PCI_ERROR) && - (events & OPAL_EVENT_PCI_ERROR)) + (events & OPAL_EVENT_PCI_ERROR) && + eeh_enabled()) eeh_send_failure_event(NULL); return 0; @@ -489,8 +490,7 @@ static int ioda_eeh_bridge_reset(struct pci_controller *hose, static int ioda_eeh_reset(struct eeh_pe *pe, int option) { struct pci_controller *hose = pe->phb; - struct eeh_dev *edev; - struct pci_dev *dev; + struct pci_bus *bus; int ret; /* @@ -519,31 +519,11 @@ static int ioda_eeh_reset(struct eeh_pe *pe, int option) if (pe->type & EEH_PE_PHB) { ret = ioda_eeh_phb_reset(hose, option); } else { - if (pe->type & EEH_PE_DEVICE) { - /* - * If it's device PE, we didn't refer to the parent - * PCI bus yet. So we have to figure it out indirectly. - */ - edev = list_first_entry(&pe->edevs, - struct eeh_dev, list); - dev = eeh_dev_to_pci_dev(edev); - dev = dev->bus->self; - } else { - /* - * If it's bus PE, the parent PCI bus is already there - * and just pick it up. - */ - dev = pe->bus->self; - } - - /* - * Do reset based on the fact that the direct upstream bridge - * is root bridge (port) or not. - */ - if (dev->bus->number == 0) + bus = eeh_pe_bus_get(pe); + if (pci_is_root_bus(bus)) ret = ioda_eeh_root_reset(hose, option); else - ret = ioda_eeh_bridge_reset(hose, dev, option); + ret = ioda_eeh_bridge_reset(hose, bus->self, option); } return ret; diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c index a79fddc5e74..a59788e83b8 100644 --- a/arch/powerpc/platforms/powernv/eeh-powernv.c +++ b/arch/powerpc/platforms/powernv/eeh-powernv.c @@ -145,7 +145,7 @@ static int powernv_eeh_dev_probe(struct pci_dev *dev, void *flag) * Enable EEH explicitly so that we will do EEH check * while accessing I/O stuff */ - eeh_subsystem_enabled = 1; + eeh_set_enable(true); /* Save memory bars */ eeh_save_bars(edev); diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c index 7d6dcc6d5fa..3b2b4fb3585 100644 --- a/arch/powerpc/platforms/powernv/pci-ioda.c +++ b/arch/powerpc/platforms/powernv/pci-ioda.c @@ -21,6 +21,7 @@ #include <linux/irq.h> #include <linux/io.h> #include <linux/msi.h> +#include <linux/memblock.h> #include <asm/sections.h> #include <asm/io.h> @@ -460,9 +461,39 @@ static void pnv_pci_ioda_dma_dev_setup(struct pnv_phb *phb, struct pci_dev *pdev return; pe = &phb->ioda.pe_array[pdn->pe_number]; + WARN_ON(get_dma_ops(&pdev->dev) != &dma_iommu_ops); set_iommu_table_base_and_group(&pdev->dev, &pe->tce32_table); } +static int pnv_pci_ioda_dma_set_mask(struct pnv_phb *phb, + struct pci_dev *pdev, u64 dma_mask) +{ + struct pci_dn *pdn = pci_get_pdn(pdev); + struct pnv_ioda_pe *pe; + uint64_t top; + bool bypass = false; + + if (WARN_ON(!pdn || pdn->pe_number == IODA_INVALID_PE)) + return -ENODEV;; + + pe = &phb->ioda.pe_array[pdn->pe_number]; + if (pe->tce_bypass_enabled) { + top = pe->tce_bypass_base + memblock_end_of_DRAM() - 1; + bypass = (dma_mask >= top); + } + + if (bypass) { + dev_info(&pdev->dev, "Using 64-bit DMA iommu bypass\n"); + set_dma_ops(&pdev->dev, &dma_direct_ops); + set_dma_offset(&pdev->dev, pe->tce_bypass_base); + } else { + dev_info(&pdev->dev, "Using 32-bit DMA via iommu\n"); + set_dma_ops(&pdev->dev, &dma_iommu_ops); + set_iommu_table_base(&pdev->dev, &pe->tce32_table); + } + return 0; +} + static void pnv_ioda_setup_bus_dma(struct pnv_ioda_pe *pe, struct pci_bus *bus) { struct pci_dev *dev; @@ -657,6 +688,56 @@ static void pnv_pci_ioda_setup_dma_pe(struct pnv_phb *phb, __free_pages(tce_mem, get_order(TCE32_TABLE_SIZE * segs)); } +static void pnv_pci_ioda2_set_bypass(struct iommu_table *tbl, bool enable) +{ + struct pnv_ioda_pe *pe = container_of(tbl, struct pnv_ioda_pe, + tce32_table); + uint16_t window_id = (pe->pe_number << 1 ) + 1; + int64_t rc; + + pe_info(pe, "%sabling 64-bit DMA bypass\n", enable ? "En" : "Dis"); + if (enable) { + phys_addr_t top = memblock_end_of_DRAM(); + + top = roundup_pow_of_two(top); + rc = opal_pci_map_pe_dma_window_real(pe->phb->opal_id, + pe->pe_number, + window_id, + pe->tce_bypass_base, + top); + } else { + rc = opal_pci_map_pe_dma_window_real(pe->phb->opal_id, + pe->pe_number, + window_id, + pe->tce_bypass_base, + 0); + + /* + * We might want to reset the DMA ops of all devices on + * this PE. However in theory, that shouldn't be necessary + * as this is used for VFIO/KVM pass-through and the device + * hasn't yet been returned to its kernel driver + */ + } + if (rc) + pe_err(pe, "OPAL error %lld configuring bypass window\n", rc); + else + pe->tce_bypass_enabled = enable; +} + +static void pnv_pci_ioda2_setup_bypass_pe(struct pnv_phb *phb, + struct pnv_ioda_pe *pe) +{ + /* TVE #1 is selected by PCI address bit 59 */ + pe->tce_bypass_base = 1ull << 59; + + /* Install set_bypass callback for VFIO */ + pe->tce32_table.set_bypass = pnv_pci_ioda2_set_bypass; + + /* Enable bypass by default */ + pnv_pci_ioda2_set_bypass(&pe->tce32_table, true); +} + static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb, struct pnv_ioda_pe *pe) { @@ -727,6 +808,8 @@ static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb, else pnv_ioda_setup_bus_dma(pe, pe->pbus); + /* Also create a bypass window */ + pnv_pci_ioda2_setup_bypass_pe(phb, pe); return; fail: if (pe->tce32_seg >= 0) @@ -1286,6 +1369,7 @@ void __init pnv_pci_init_ioda_phb(struct device_node *np, /* Setup TCEs */ phb->dma_dev_setup = pnv_pci_ioda_dma_dev_setup; + phb->dma_set_mask = pnv_pci_ioda_dma_set_mask; /* Setup shutdown function for kexec */ phb->shutdown = pnv_pci_ioda_shutdown; diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c index b555ebc57ef..95633d79ef5 100644 --- a/arch/powerpc/platforms/powernv/pci.c +++ b/arch/powerpc/platforms/powernv/pci.c @@ -634,6 +634,16 @@ static void pnv_pci_dma_dev_setup(struct pci_dev *pdev) pnv_pci_dma_fallback_setup(hose, pdev); } +int pnv_pci_dma_set_mask(struct pci_dev *pdev, u64 dma_mask) +{ + struct pci_controller *hose = pci_bus_to_host(pdev->bus); + struct pnv_phb *phb = hose->private_data; + + if (phb && phb->dma_set_mask) + return phb->dma_set_mask(phb, pdev, dma_mask); + return __dma_set_mask(&pdev->dev, dma_mask); +} + void pnv_pci_shutdown(void) { struct pci_controller *hose; diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h index 13f1942a9a5..cde16944277 100644 --- a/arch/powerpc/platforms/powernv/pci.h +++ b/arch/powerpc/platforms/powernv/pci.h @@ -54,7 +54,9 @@ struct pnv_ioda_pe { struct iommu_table tce32_table; phys_addr_t tce_inval_reg_phys; - /* XXX TODO: Add support for additional 64-bit iommus */ + /* 64-bit TCE bypass region */ + bool tce_bypass_enabled; + uint64_t tce_bypass_base; /* MSIs. MVE index is identical for for 32 and 64 bit MSI * and -1 if not supported. (It's actually identical to the @@ -113,6 +115,8 @@ struct pnv_phb { unsigned int hwirq, unsigned int virq, unsigned int is_64, struct msi_msg *msg); void (*dma_dev_setup)(struct pnv_phb *phb, struct pci_dev *pdev); + int (*dma_set_mask)(struct pnv_phb *phb, struct pci_dev *pdev, + u64 dma_mask); void (*fixup_phb)(struct pci_controller *hose); u32 (*bdfn_to_pe)(struct pnv_phb *phb, struct pci_bus *bus, u32 devfn); void (*shutdown)(struct pnv_phb *phb); diff --git a/arch/powerpc/platforms/powernv/powernv.h b/arch/powerpc/platforms/powernv/powernv.h index de6819be1f9..0051e108ef0 100644 --- a/arch/powerpc/platforms/powernv/powernv.h +++ b/arch/powerpc/platforms/powernv/powernv.h @@ -7,12 +7,20 @@ extern void pnv_smp_init(void); static inline void pnv_smp_init(void) { } #endif +struct pci_dev; + #ifdef CONFIG_PCI extern void pnv_pci_init(void); extern void pnv_pci_shutdown(void); +extern int pnv_pci_dma_set_mask(struct pci_dev *pdev, u64 dma_mask); #else static inline void pnv_pci_init(void) { } static inline void pnv_pci_shutdown(void) { } + +static inline int pnv_pci_dma_set_mask(struct pci_dev *pdev, u64 dma_mask) +{ + return -ENODEV; +} #endif extern void pnv_lpc_init(void); diff --git a/arch/powerpc/platforms/powernv/setup.c b/arch/powerpc/platforms/powernv/setup.c index 21166f65c97..110f4fbd319 100644 --- a/arch/powerpc/platforms/powernv/setup.c +++ b/arch/powerpc/platforms/powernv/setup.c @@ -27,6 +27,7 @@ #include <linux/interrupt.h> #include <linux/bug.h> #include <linux/cpuidle.h> +#include <linux/pci.h> #include <asm/machdep.h> #include <asm/firmware.h> @@ -141,6 +142,13 @@ static void pnv_progress(char *s, unsigned short hex) { } +static int pnv_dma_set_mask(struct device *dev, u64 dma_mask) +{ + if (dev_is_pci(dev)) + return pnv_pci_dma_set_mask(to_pci_dev(dev), dma_mask); + return __dma_set_mask(dev, dma_mask); +} + static void pnv_shutdown(void) { /* Let the PCI code clear up IODA tables */ @@ -238,6 +246,7 @@ define_machine(powernv) { .machine_shutdown = pnv_shutdown, .power_save = powernv_idle, .calibrate_decr = generic_calibrate_decr, + .dma_set_mask = pnv_dma_set_mask, #ifdef CONFIG_KEXEC .kexec_cpu_down = pnv_kexec_cpu_down, #endif diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig index 37300f6ee24..80b1d57c306 100644 --- a/arch/powerpc/platforms/pseries/Kconfig +++ b/arch/powerpc/platforms/pseries/Kconfig @@ -20,6 +20,7 @@ config PPC_PSERIES select PPC_DOORBELL select HAVE_CONTEXT_TRACKING select HOTPLUG_CPU if SMP + select ARCH_RANDOM default y config PPC_SPLPAR diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c index 9ef3cc8ebc1..8a8f0472d98 100644 --- a/arch/powerpc/platforms/pseries/eeh_pseries.c +++ b/arch/powerpc/platforms/pseries/eeh_pseries.c @@ -265,7 +265,7 @@ static void *pseries_eeh_of_probe(struct device_node *dn, void *flag) enable = 1; if (enable) { - eeh_subsystem_enabled = 1; + eeh_set_enable(true); eeh_add_to_parent_pe(edev); pr_debug("%s: EEH enabled on %s PHB#%d-PE#%x, config addr#%x\n", diff --git a/arch/powerpc/platforms/pseries/pci.c b/arch/powerpc/platforms/pseries/pci.c index 70670a2d9cf..c413ec158ff 100644 --- a/arch/powerpc/platforms/pseries/pci.c +++ b/arch/powerpc/platforms/pseries/pci.c @@ -113,7 +113,8 @@ int pseries_root_bridge_prepare(struct pci_host_bridge *bridge) { struct device_node *dn, *pdn; struct pci_bus *bus; - const __be32 *pcie_link_speed_stats; + u32 pcie_link_speed_stats[2]; + int rc; bus = bridge->bus; @@ -122,38 +123,45 @@ int pseries_root_bridge_prepare(struct pci_host_bridge *bridge) return 0; for (pdn = dn; pdn != NULL; pdn = of_get_next_parent(pdn)) { - pcie_link_speed_stats = of_get_property(pdn, - "ibm,pcie-link-speed-stats", NULL); - if (pcie_link_speed_stats) + rc = of_property_read_u32_array(pdn, + "ibm,pcie-link-speed-stats", + &pcie_link_speed_stats[0], 2); + if (!rc) break; } of_node_put(pdn); - if (!pcie_link_speed_stats) { + if (rc) { pr_err("no ibm,pcie-link-speed-stats property\n"); return 0; } - switch (be32_to_cpup(pcie_link_speed_stats)) { + switch (pcie_link_speed_stats[0]) { case 0x01: bus->max_bus_speed = PCIE_SPEED_2_5GT; break; case 0x02: bus->max_bus_speed = PCIE_SPEED_5_0GT; break; + case 0x04: + bus->max_bus_speed = PCIE_SPEED_8_0GT; + break; default: bus->max_bus_speed = PCI_SPEED_UNKNOWN; break; } - switch (be32_to_cpup(pcie_link_speed_stats)) { + switch (pcie_link_speed_stats[1]) { case 0x01: bus->cur_bus_speed = PCIE_SPEED_2_5GT; break; case 0x02: bus->cur_bus_speed = PCIE_SPEED_5_0GT; break; + case 0x04: + bus->cur_bus_speed = PCIE_SPEED_8_0GT; + break; default: bus->cur_bus_speed = PCI_SPEED_UNKNOWN; break; diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index 8e639d7cbda..972df0ffd4d 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -430,8 +430,7 @@ static void pSeries_machine_kexec(struct kimage *image) { long rc; - if (firmware_has_feature(FW_FEATURE_SET_MODE) && - (image->type != KEXEC_TYPE_CRASH)) { + if (firmware_has_feature(FW_FEATURE_SET_MODE)) { rc = pSeries_disable_reloc_on_exc(); if (rc != H_SUCCESS) pr_warning("Warning: Failed to disable relocation on " diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index 0e166ed4cd1..8209744b282 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -886,25 +886,25 @@ int mpic_set_irq_type(struct irq_data *d, unsigned int flow_type) /* Default: read HW settings */ if (flow_type == IRQ_TYPE_DEFAULT) { - switch(vold & (MPIC_INFO(VECPRI_POLARITY_MASK) | - MPIC_INFO(VECPRI_SENSE_MASK))) { - case MPIC_INFO(VECPRI_SENSE_EDGE) | - MPIC_INFO(VECPRI_POLARITY_POSITIVE): - flow_type = IRQ_TYPE_EDGE_RISING; - break; - case MPIC_INFO(VECPRI_SENSE_EDGE) | - MPIC_INFO(VECPRI_POLARITY_NEGATIVE): - flow_type = IRQ_TYPE_EDGE_FALLING; - break; - case MPIC_INFO(VECPRI_SENSE_LEVEL) | - MPIC_INFO(VECPRI_POLARITY_POSITIVE): - flow_type = IRQ_TYPE_LEVEL_HIGH; - break; - case MPIC_INFO(VECPRI_SENSE_LEVEL) | - MPIC_INFO(VECPRI_POLARITY_NEGATIVE): - flow_type = IRQ_TYPE_LEVEL_LOW; - break; - } + int vold_ps; + + vold_ps = vold & (MPIC_INFO(VECPRI_POLARITY_MASK) | + MPIC_INFO(VECPRI_SENSE_MASK)); + + if (vold_ps == (MPIC_INFO(VECPRI_SENSE_EDGE) | + MPIC_INFO(VECPRI_POLARITY_POSITIVE))) + flow_type = IRQ_TYPE_EDGE_RISING; + else if (vold_ps == (MPIC_INFO(VECPRI_SENSE_EDGE) | + MPIC_INFO(VECPRI_POLARITY_NEGATIVE))) + flow_type = IRQ_TYPE_EDGE_FALLING; + else if (vold_ps == (MPIC_INFO(VECPRI_SENSE_LEVEL) | + MPIC_INFO(VECPRI_POLARITY_POSITIVE))) + flow_type = IRQ_TYPE_LEVEL_HIGH; + else if (vold_ps == (MPIC_INFO(VECPRI_SENSE_LEVEL) | + MPIC_INFO(VECPRI_POLARITY_NEGATIVE))) + flow_type = IRQ_TYPE_LEVEL_LOW; + else + WARN_ONCE(1, "mpic: unknown IRQ type %d\n", vold); } /* Apply to irq desc */ diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index a90731b3d44..b07909850f7 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -309,16 +309,23 @@ static void get_output_lock(void) if (xmon_speaker == me) return; + for (;;) { - if (xmon_speaker == 0) { - last_speaker = cmpxchg(&xmon_speaker, 0, me); - if (last_speaker == 0) - return; - } - timeout = 10000000; + last_speaker = cmpxchg(&xmon_speaker, 0, me); + if (last_speaker == 0) + return; + + /* + * Wait a full second for the lock, we might be on a slow + * console, but check every 100us. + */ + timeout = 10000; while (xmon_speaker == last_speaker) { - if (--timeout > 0) + if (--timeout > 0) { + udelay(100); continue; + } + /* hostile takeover */ prev = cmpxchg(&xmon_speaker, last_speaker, me); if (prev == last_speaker) @@ -397,7 +404,6 @@ static int xmon_core(struct pt_regs *regs, int fromipi) } xmon_fault_jmp[cpu] = recurse_jmp; - cpumask_set_cpu(cpu, &cpus_in_xmon); bp = NULL; if ((regs->msr & (MSR_IR|MSR_PR|MSR_64BIT)) == (MSR_IR|MSR_64BIT)) @@ -419,6 +425,8 @@ static int xmon_core(struct pt_regs *regs, int fromipi) release_output_lock(); } + cpumask_set_cpu(cpu, &cpus_in_xmon); + waiting: secondary = 1; while (secondary && !xmon_gate) { diff --git a/arch/s390/appldata/appldata_base.c b/arch/s390/appldata/appldata_base.c index 4c4a1cef520..47c8630c93c 100644 --- a/arch/s390/appldata/appldata_base.c +++ b/arch/s390/appldata/appldata_base.c @@ -529,6 +529,7 @@ static int __init appldata_init(void) { int rc; + init_virt_timer(&appldata_timer); appldata_timer.function = appldata_timer_function; appldata_timer.data = (unsigned long) &appldata_work; diff --git a/arch/s390/crypto/aes_s390.c b/arch/s390/crypto/aes_s390.c index b3feabd39f3..cf3c0089bef 100644 --- a/arch/s390/crypto/aes_s390.c +++ b/arch/s390/crypto/aes_s390.c @@ -25,6 +25,7 @@ #include <linux/err.h> #include <linux/module.h> #include <linux/init.h> +#include <linux/spinlock.h> #include "crypt_s390.h" #define AES_KEYLEN_128 1 @@ -32,6 +33,7 @@ #define AES_KEYLEN_256 4 static u8 *ctrblk; +static DEFINE_SPINLOCK(ctrblk_lock); static char keylen_flag; struct s390_aes_ctx { @@ -758,43 +760,67 @@ static int ctr_aes_set_key(struct crypto_tfm *tfm, const u8 *in_key, return aes_set_key(tfm, in_key, key_len); } +static unsigned int __ctrblk_init(u8 *ctrptr, unsigned int nbytes) +{ + unsigned int i, n; + + /* only use complete blocks, max. PAGE_SIZE */ + n = (nbytes > PAGE_SIZE) ? PAGE_SIZE : nbytes & ~(AES_BLOCK_SIZE - 1); + for (i = AES_BLOCK_SIZE; i < n; i += AES_BLOCK_SIZE) { + memcpy(ctrptr + i, ctrptr + i - AES_BLOCK_SIZE, + AES_BLOCK_SIZE); + crypto_inc(ctrptr + i, AES_BLOCK_SIZE); + } + return n; +} + static int ctr_aes_crypt(struct blkcipher_desc *desc, long func, struct s390_aes_ctx *sctx, struct blkcipher_walk *walk) { int ret = blkcipher_walk_virt_block(desc, walk, AES_BLOCK_SIZE); - unsigned int i, n, nbytes; - u8 buf[AES_BLOCK_SIZE]; - u8 *out, *in; + unsigned int n, nbytes; + u8 buf[AES_BLOCK_SIZE], ctrbuf[AES_BLOCK_SIZE]; + u8 *out, *in, *ctrptr = ctrbuf; if (!walk->nbytes) return ret; - memcpy(ctrblk, walk->iv, AES_BLOCK_SIZE); + if (spin_trylock(&ctrblk_lock)) + ctrptr = ctrblk; + + memcpy(ctrptr, walk->iv, AES_BLOCK_SIZE); while ((nbytes = walk->nbytes) >= AES_BLOCK_SIZE) { out = walk->dst.virt.addr; in = walk->src.virt.addr; while (nbytes >= AES_BLOCK_SIZE) { - /* only use complete blocks, max. PAGE_SIZE */ - n = (nbytes > PAGE_SIZE) ? PAGE_SIZE : - nbytes & ~(AES_BLOCK_SIZE - 1); - for (i = AES_BLOCK_SIZE; i < n; i += AES_BLOCK_SIZE) { - memcpy(ctrblk + i, ctrblk + i - AES_BLOCK_SIZE, - AES_BLOCK_SIZE); - crypto_inc(ctrblk + i, AES_BLOCK_SIZE); - } - ret = crypt_s390_kmctr(func, sctx->key, out, in, n, ctrblk); - if (ret < 0 || ret != n) + if (ctrptr == ctrblk) + n = __ctrblk_init(ctrptr, nbytes); + else + n = AES_BLOCK_SIZE; + ret = crypt_s390_kmctr(func, sctx->key, out, in, + n, ctrptr); + if (ret < 0 || ret != n) { + if (ctrptr == ctrblk) + spin_unlock(&ctrblk_lock); return -EIO; + } if (n > AES_BLOCK_SIZE) - memcpy(ctrblk, ctrblk + n - AES_BLOCK_SIZE, + memcpy(ctrptr, ctrptr + n - AES_BLOCK_SIZE, AES_BLOCK_SIZE); - crypto_inc(ctrblk, AES_BLOCK_SIZE); + crypto_inc(ctrptr, AES_BLOCK_SIZE); out += n; in += n; nbytes -= n; } ret = blkcipher_walk_done(desc, walk, nbytes); } + if (ctrptr == ctrblk) { + if (nbytes) + memcpy(ctrbuf, ctrptr, AES_BLOCK_SIZE); + else + memcpy(walk->iv, ctrptr, AES_BLOCK_SIZE); + spin_unlock(&ctrblk_lock); + } /* * final block may be < AES_BLOCK_SIZE, copy only nbytes */ @@ -802,14 +828,15 @@ static int ctr_aes_crypt(struct blkcipher_desc *desc, long func, out = walk->dst.virt.addr; in = walk->src.virt.addr; ret = crypt_s390_kmctr(func, sctx->key, buf, in, - AES_BLOCK_SIZE, ctrblk); + AES_BLOCK_SIZE, ctrbuf); if (ret < 0 || ret != AES_BLOCK_SIZE) return -EIO; memcpy(out, buf, nbytes); - crypto_inc(ctrblk, AES_BLOCK_SIZE); + crypto_inc(ctrbuf, AES_BLOCK_SIZE); ret = blkcipher_walk_done(desc, walk, 0); + memcpy(walk->iv, ctrbuf, AES_BLOCK_SIZE); } - memcpy(walk->iv, ctrblk, AES_BLOCK_SIZE); + return ret; } diff --git a/arch/s390/crypto/des_s390.c b/arch/s390/crypto/des_s390.c index 200f2a1b599..0a5aac8a941 100644 --- a/arch/s390/crypto/des_s390.c +++ b/arch/s390/crypto/des_s390.c @@ -25,6 +25,7 @@ #define DES3_KEY_SIZE (3 * DES_KEY_SIZE) static u8 *ctrblk; +static DEFINE_SPINLOCK(ctrblk_lock); struct s390_des_ctx { u8 iv[DES_BLOCK_SIZE]; @@ -105,29 +106,35 @@ static int ecb_desall_crypt(struct blkcipher_desc *desc, long func, } static int cbc_desall_crypt(struct blkcipher_desc *desc, long func, - u8 *iv, struct blkcipher_walk *walk) + struct blkcipher_walk *walk) { + struct s390_des_ctx *ctx = crypto_blkcipher_ctx(desc->tfm); int ret = blkcipher_walk_virt(desc, walk); unsigned int nbytes = walk->nbytes; + struct { + u8 iv[DES_BLOCK_SIZE]; + u8 key[DES3_KEY_SIZE]; + } param; if (!nbytes) goto out; - memcpy(iv, walk->iv, DES_BLOCK_SIZE); + memcpy(param.iv, walk->iv, DES_BLOCK_SIZE); + memcpy(param.key, ctx->key, DES3_KEY_SIZE); do { /* only use complete blocks */ unsigned int n = nbytes & ~(DES_BLOCK_SIZE - 1); u8 *out = walk->dst.virt.addr; u8 *in = walk->src.virt.addr; - ret = crypt_s390_kmc(func, iv, out, in, n); + ret = crypt_s390_kmc(func, ¶m, out, in, n); if (ret < 0 || ret != n) return -EIO; nbytes &= DES_BLOCK_SIZE - 1; ret = blkcipher_walk_done(desc, walk, nbytes); } while ((nbytes = walk->nbytes)); - memcpy(walk->iv, iv, DES_BLOCK_SIZE); + memcpy(walk->iv, param.iv, DES_BLOCK_SIZE); out: return ret; @@ -179,22 +186,20 @@ static int cbc_des_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst, struct scatterlist *src, unsigned int nbytes) { - struct s390_des_ctx *ctx = crypto_blkcipher_ctx(desc->tfm); struct blkcipher_walk walk; blkcipher_walk_init(&walk, dst, src, nbytes); - return cbc_desall_crypt(desc, KMC_DEA_ENCRYPT, ctx->iv, &walk); + return cbc_desall_crypt(desc, KMC_DEA_ENCRYPT, &walk); } static int cbc_des_decrypt(struct blkcipher_desc *desc, struct scatterlist *dst, struct scatterlist *src, unsigned int nbytes) { - struct s390_des_ctx *ctx = crypto_blkcipher_ctx(desc->tfm); struct blkcipher_walk walk; blkcipher_walk_init(&walk, dst, src, nbytes); - return cbc_desall_crypt(desc, KMC_DEA_DECRYPT, ctx->iv, &walk); + return cbc_desall_crypt(desc, KMC_DEA_DECRYPT, &walk); } static struct crypto_alg cbc_des_alg = { @@ -327,22 +332,20 @@ static int cbc_des3_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst, struct scatterlist *src, unsigned int nbytes) { - struct s390_des_ctx *ctx = crypto_blkcipher_ctx(desc->tfm); struct blkcipher_walk walk; blkcipher_walk_init(&walk, dst, src, nbytes); - return cbc_desall_crypt(desc, KMC_TDEA_192_ENCRYPT, ctx->iv, &walk); + return cbc_desall_crypt(desc, KMC_TDEA_192_ENCRYPT, &walk); } static int cbc_des3_decrypt(struct blkcipher_desc *desc, struct scatterlist *dst, struct scatterlist *src, unsigned int nbytes) { - struct s390_des_ctx *ctx = crypto_blkcipher_ctx(desc->tfm); struct blkcipher_walk walk; blkcipher_walk_init(&walk, dst, src, nbytes); - return cbc_desall_crypt(desc, KMC_TDEA_192_DECRYPT, ctx->iv, &walk); + return cbc_desall_crypt(desc, KMC_TDEA_192_DECRYPT, &walk); } static struct crypto_alg cbc_des3_alg = { @@ -366,54 +369,80 @@ static struct crypto_alg cbc_des3_alg = { } }; +static unsigned int __ctrblk_init(u8 *ctrptr, unsigned int nbytes) +{ + unsigned int i, n; + + /* align to block size, max. PAGE_SIZE */ + n = (nbytes > PAGE_SIZE) ? PAGE_SIZE : nbytes & ~(DES_BLOCK_SIZE - 1); + for (i = DES_BLOCK_SIZE; i < n; i += DES_BLOCK_SIZE) { + memcpy(ctrptr + i, ctrptr + i - DES_BLOCK_SIZE, DES_BLOCK_SIZE); + crypto_inc(ctrptr + i, DES_BLOCK_SIZE); + } + return n; +} + static int ctr_desall_crypt(struct blkcipher_desc *desc, long func, - struct s390_des_ctx *ctx, struct blkcipher_walk *walk) + struct s390_des_ctx *ctx, + struct blkcipher_walk *walk) { int ret = blkcipher_walk_virt_block(desc, walk, DES_BLOCK_SIZE); - unsigned int i, n, nbytes; - u8 buf[DES_BLOCK_SIZE]; - u8 *out, *in; + unsigned int n, nbytes; + u8 buf[DES_BLOCK_SIZE], ctrbuf[DES_BLOCK_SIZE]; + u8 *out, *in, *ctrptr = ctrbuf; + + if (!walk->nbytes) + return ret; - memcpy(ctrblk, walk->iv, DES_BLOCK_SIZE); + if (spin_trylock(&ctrblk_lock)) + ctrptr = ctrblk; + + memcpy(ctrptr, walk->iv, DES_BLOCK_SIZE); while ((nbytes = walk->nbytes) >= DES_BLOCK_SIZE) { out = walk->dst.virt.addr; in = walk->src.virt.addr; while (nbytes >= DES_BLOCK_SIZE) { - /* align to block size, max. PAGE_SIZE */ - n = (nbytes > PAGE_SIZE) ? PAGE_SIZE : - nbytes & ~(DES_BLOCK_SIZE - 1); - for (i = DES_BLOCK_SIZE; i < n; i += DES_BLOCK_SIZE) { - memcpy(ctrblk + i, ctrblk + i - DES_BLOCK_SIZE, - DES_BLOCK_SIZE); - crypto_inc(ctrblk + i, DES_BLOCK_SIZE); - } - ret = crypt_s390_kmctr(func, ctx->key, out, in, n, ctrblk); - if (ret < 0 || ret != n) + if (ctrptr == ctrblk) + n = __ctrblk_init(ctrptr, nbytes); + else + n = DES_BLOCK_SIZE; + ret = crypt_s390_kmctr(func, ctx->key, out, in, + n, ctrptr); + if (ret < 0 || ret != n) { + if (ctrptr == ctrblk) + spin_unlock(&ctrblk_lock); return -EIO; + } if (n > DES_BLOCK_SIZE) - memcpy(ctrblk, ctrblk + n - DES_BLOCK_SIZE, + memcpy(ctrptr, ctrptr + n - DES_BLOCK_SIZE, DES_BLOCK_SIZE); - crypto_inc(ctrblk, DES_BLOCK_SIZE); + crypto_inc(ctrptr, DES_BLOCK_SIZE); out += n; in += n; nbytes -= n; } ret = blkcipher_walk_done(desc, walk, nbytes); } - + if (ctrptr == ctrblk) { + if (nbytes) + memcpy(ctrbuf, ctrptr, DES_BLOCK_SIZE); + else + memcpy(walk->iv, ctrptr, DES_BLOCK_SIZE); + spin_unlock(&ctrblk_lock); + } /* final block may be < DES_BLOCK_SIZE, copy only nbytes */ if (nbytes) { out = walk->dst.virt.addr; in = walk->src.virt.addr; ret = crypt_s390_kmctr(func, ctx->key, buf, in, - DES_BLOCK_SIZE, ctrblk); + DES_BLOCK_SIZE, ctrbuf); if (ret < 0 || ret != DES_BLOCK_SIZE) return -EIO; memcpy(out, buf, nbytes); - crypto_inc(ctrblk, DES_BLOCK_SIZE); + crypto_inc(ctrbuf, DES_BLOCK_SIZE); ret = blkcipher_walk_done(desc, walk, 0); + memcpy(walk->iv, ctrbuf, DES_BLOCK_SIZE); } - memcpy(walk->iv, ctrblk, DES_BLOCK_SIZE); return ret; } diff --git a/arch/s390/kernel/head64.S b/arch/s390/kernel/head64.S index b9e25ae2579..d7c00507568 100644 --- a/arch/s390/kernel/head64.S +++ b/arch/s390/kernel/head64.S @@ -59,7 +59,7 @@ ENTRY(startup_continue) .quad 0 # cr12: tracing off .quad 0 # cr13: home space segment table .quad 0xc0000000 # cr14: machine check handling off - .quad 0 # cr15: linkage stack operations + .quad .Llinkage_stack # cr15: linkage stack operations .Lpcmsk:.quad 0x0000000180000000 .L4malign:.quad 0xffffffffffc00000 .Lscan2g:.quad 0x80000000 + 0x20000 - 8 # 2GB + 128K - 8 @@ -67,12 +67,15 @@ ENTRY(startup_continue) .Lparmaddr: .quad PARMAREA .align 64 -.Lduct: .long 0,0,0,0,.Lduald,0,0,0 +.Lduct: .long 0,.Laste,.Laste,0,.Lduald,0,0,0 .long 0,0,0,0,0,0,0,0 +.Laste: .quad 0,0xffffffffffffffff,0,0,0,0,0,0 .align 128 .Lduald:.rept 8 .long 0x80000000,0,0,0 # invalid access-list entries .endr +.Llinkage_stack: + .long 0,0,0x89000000,0,0,0,0x8a000000,0 ENTRY(_ehead) diff --git a/arch/s390/mm/page-states.c b/arch/s390/mm/page-states.c index a90d45e9dfb..27c50f4d90c 100644 --- a/arch/s390/mm/page-states.c +++ b/arch/s390/mm/page-states.c @@ -12,6 +12,8 @@ #include <linux/mm.h> #include <linux/gfp.h> #include <linux/init.h> +#include <asm/setup.h> +#include <asm/ipl.h> #define ESSA_SET_STABLE 1 #define ESSA_SET_UNUSED 2 @@ -41,6 +43,14 @@ void __init cmma_init(void) if (!cmma_flag) return; + /* + * Disable CMM for dump, otherwise the tprot based memory + * detection can fail because of unstable pages. + */ + if (OLDMEM_BASE || ipl_info.type == IPL_TYPE_FCP_DUMP) { + cmma_flag = 0; + return; + } asm volatile( " .insn rrf,0xb9ab0000,%1,%1,0,0\n" "0: la %0,0\n" diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index c51efdcd07a..7d8b7e94b93 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -27,7 +27,7 @@ config SPARC select RTC_DRV_M48T59 select HAVE_DMA_ATTRS select HAVE_DMA_API_DEBUG - select HAVE_ARCH_JUMP_LABEL + select HAVE_ARCH_JUMP_LABEL if SPARC64 select GENERIC_IRQ_SHOW select ARCH_WANT_IPC_PARSE_VERSION select GENERIC_PCI_IOMAP diff --git a/arch/sparc/mm/srmmu.c b/arch/sparc/mm/srmmu.c index 869023abe5a..cfbe53c17b0 100644 --- a/arch/sparc/mm/srmmu.c +++ b/arch/sparc/mm/srmmu.c @@ -14,6 +14,7 @@ #include <linux/pagemap.h> #include <linux/vmalloc.h> #include <linux/kdebug.h> +#include <linux/export.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/log2.h> @@ -62,6 +63,7 @@ extern unsigned long last_valid_pfn; static pgd_t *srmmu_swapper_pg_dir; const struct sparc32_cachetlb_ops *sparc32_cachetlb_ops; +EXPORT_SYMBOL(sparc32_cachetlb_ops); #ifdef CONFIG_SMP const struct sparc32_cachetlb_ops *local_ops; diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 940e50ebfaf..0af5250d914 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -444,6 +444,7 @@ config X86_INTEL_MID bool "Intel MID platform support" depends on X86_32 depends on X86_EXTENDED_PLATFORM + depends on X86_PLATFORM_DEVICES depends on PCI depends on PCI_GOANY depends on X86_IO_APIC @@ -1051,9 +1052,9 @@ config MICROCODE_INTEL This options enables microcode patch loading support for Intel processors. - For latest news and information on obtaining all the required - Intel ingredients for this driver, check: - <http://www.urbanmyth.org/microcode/>. + For the current Intel microcode data package go to + <https://downloadcenter.intel.com> and search for + 'Linux Processor Microcode Data File'. config MICROCODE_AMD bool "AMD microcode loading support" diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug index 0f3621ed1db..321a52ccf63 100644 --- a/arch/x86/Kconfig.debug +++ b/arch/x86/Kconfig.debug @@ -184,6 +184,7 @@ config HAVE_MMIOTRACE_SUPPORT config X86_DECODER_SELFTEST bool "x86 instruction decoder selftest" depends on DEBUG_KERNEL && KPROBES + depends on !COMPILE_TEST ---help--- Perform x86 instruction decoder selftests at build time. This option is useful for checking the sanity of x86 instruction diff --git a/arch/x86/include/asm/amd_nb.h b/arch/x86/include/asm/amd_nb.h index a54ee1d054d..aaac3b2fb74 100644 --- a/arch/x86/include/asm/amd_nb.h +++ b/arch/x86/include/asm/amd_nb.h @@ -19,7 +19,7 @@ extern int amd_cache_northbridges(void); extern void amd_flush_garts(void); extern int amd_numa_init(void); extern int amd_get_subcaches(int); -extern int amd_set_subcaches(int, int); +extern int amd_set_subcaches(int, unsigned long); struct amd_l3_cache { unsigned indices; diff --git a/arch/x86/include/asm/efi.h b/arch/x86/include/asm/efi.h index 3b978c472d0..3d6b9f81cc6 100644 --- a/arch/x86/include/asm/efi.h +++ b/arch/x86/include/asm/efi.h @@ -132,6 +132,8 @@ extern void __init efi_map_region_fixed(efi_memory_desc_t *md); extern void efi_sync_low_kernel_mappings(void); extern void efi_setup_page_tables(void); extern void __init old_map_region(efi_memory_desc_t *md); +extern void __init runtime_code_page_mkexec(void); +extern void __init efi_runtime_mkexec(void); struct efi_setup_data { u64 fw_vendor; diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h index bbc8b12fa44..5ad38ad0789 100644 --- a/arch/x86/include/asm/pgtable.h +++ b/arch/x86/include/asm/pgtable.h @@ -445,10 +445,20 @@ static inline int pte_same(pte_t a, pte_t b) return a.pte == b.pte; } +static inline int pteval_present(pteval_t pteval) +{ + /* + * Yes Linus, _PAGE_PROTNONE == _PAGE_NUMA. Expressing it this + * way clearly states that the intent is that protnone and numa + * hinting ptes are considered present for the purposes of + * pagetable operations like zapping, protection changes, gup etc. + */ + return pteval & (_PAGE_PRESENT | _PAGE_PROTNONE | _PAGE_NUMA); +} + static inline int pte_present(pte_t a) { - return pte_flags(a) & (_PAGE_PRESENT | _PAGE_PROTNONE | - _PAGE_NUMA); + return pteval_present(pte_flags(a)); } #define pte_accessible pte_accessible diff --git a/arch/x86/include/asm/tlbflush.h b/arch/x86/include/asm/tlbflush.h index e6d90babc24..04905bfc508 100644 --- a/arch/x86/include/asm/tlbflush.h +++ b/arch/x86/include/asm/tlbflush.h @@ -62,7 +62,7 @@ static inline void __flush_tlb_all(void) static inline void __flush_tlb_one(unsigned long addr) { - count_vm_event(NR_TLB_LOCAL_FLUSH_ONE); + count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ONE); __flush_tlb_single(addr); } @@ -93,13 +93,13 @@ static inline void __flush_tlb_one(unsigned long addr) */ static inline void __flush_tlb_up(void) { - count_vm_event(NR_TLB_LOCAL_FLUSH_ALL); + count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ALL); __flush_tlb(); } static inline void flush_tlb_all(void) { - count_vm_event(NR_TLB_LOCAL_FLUSH_ALL); + count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ALL); __flush_tlb_all(); } diff --git a/arch/x86/include/asm/tsc.h b/arch/x86/include/asm/tsc.h index 57ae63cd6ee..94605c0e9ce 100644 --- a/arch/x86/include/asm/tsc.h +++ b/arch/x86/include/asm/tsc.h @@ -66,6 +66,6 @@ extern void tsc_save_sched_clock_state(void); extern void tsc_restore_sched_clock_state(void); /* MSR based TSC calibration for Intel Atom SoC platforms */ -int try_msr_calibrate_tsc(unsigned long *fast_calibrate); +unsigned long try_msr_calibrate_tsc(void); #endif /* _ASM_X86_TSC_H */ diff --git a/arch/x86/include/asm/xen/page.h b/arch/x86/include/asm/xen/page.h index 787e1bb5aaf..3e276eb23d1 100644 --- a/arch/x86/include/asm/xen/page.h +++ b/arch/x86/include/asm/xen/page.h @@ -52,8 +52,7 @@ extern unsigned long set_phys_range_identity(unsigned long pfn_s, extern int m2p_add_override(unsigned long mfn, struct page *page, struct gnttab_map_grant_ref *kmap_op); extern int m2p_remove_override(struct page *page, - struct gnttab_map_grant_ref *kmap_op, - unsigned long mfn); + struct gnttab_map_grant_ref *kmap_op); extern struct page *m2p_find_override(unsigned long mfn); extern unsigned long m2p_find_override_pfn(unsigned long mfn, unsigned long pfn); @@ -122,7 +121,7 @@ static inline unsigned long mfn_to_pfn(unsigned long mfn) pfn = m2p_find_override_pfn(mfn, ~0); } - /* + /* * pfn is ~0 if there are no entries in the m2p for mfn or if the * entry doesn't map back to the mfn and m2p_override doesn't have a * valid entry for it. diff --git a/arch/x86/kernel/amd_nb.c b/arch/x86/kernel/amd_nb.c index 59554dca96e..dec8de4e166 100644 --- a/arch/x86/kernel/amd_nb.c +++ b/arch/x86/kernel/amd_nb.c @@ -179,7 +179,7 @@ int amd_get_subcaches(int cpu) return (mask >> (4 * cuid)) & 0xf; } -int amd_set_subcaches(int cpu, int mask) +int amd_set_subcaches(int cpu, unsigned long mask) { static unsigned int reset, ban; struct amd_northbridge *nb = node_to_amd_nb(amd_get_nb_id(cpu)); diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index d3153e281d7..c67ffa68606 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -767,10 +767,7 @@ static unsigned int amd_size_cache(struct cpuinfo_x86 *c, unsigned int size) static void cpu_set_tlb_flushall_shift(struct cpuinfo_x86 *c) { - tlb_flushall_shift = 5; - - if (c->x86 <= 0x11) - tlb_flushall_shift = 4; + tlb_flushall_shift = 6; } static void cpu_detect_tlb_amd(struct cpuinfo_x86 *c) diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index 24b6fd10625..8e28bf2fc3e 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -284,8 +284,13 @@ static __always_inline void setup_smap(struct cpuinfo_x86 *c) raw_local_save_flags(eflags); BUG_ON(eflags & X86_EFLAGS_AC); - if (cpu_has(c, X86_FEATURE_SMAP)) + if (cpu_has(c, X86_FEATURE_SMAP)) { +#ifdef CONFIG_X86_SMAP set_in_cr4(X86_CR4_SMAP); +#else + clear_in_cr4(X86_CR4_SMAP); +#endif + } } /* diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c index 3db61c644e4..5cd9bfabd64 100644 --- a/arch/x86/kernel/cpu/intel.c +++ b/arch/x86/kernel/cpu/intel.c @@ -640,21 +640,17 @@ static void intel_tlb_flushall_shift_set(struct cpuinfo_x86 *c) case 0x61d: /* six-core 45 nm xeon "Dunnington" */ tlb_flushall_shift = -1; break; + case 0x63a: /* Ivybridge */ + tlb_flushall_shift = 2; + break; case 0x61a: /* 45 nm nehalem, "Bloomfield" */ case 0x61e: /* 45 nm nehalem, "Lynnfield" */ case 0x625: /* 32 nm nehalem, "Clarkdale" */ case 0x62c: /* 32 nm nehalem, "Gulftown" */ case 0x62e: /* 45 nm nehalem-ex, "Beckton" */ case 0x62f: /* 32 nm Xeon E7 */ - tlb_flushall_shift = 6; - break; case 0x62a: /* SandyBridge */ case 0x62d: /* SandyBridge, "Romely-EP" */ - tlb_flushall_shift = 5; - break; - case 0x63a: /* Ivybridge */ - tlb_flushall_shift = 1; - break; default: tlb_flushall_shift = 6; } diff --git a/arch/x86/kernel/cpu/microcode/amd_early.c b/arch/x86/kernel/cpu/microcode/amd_early.c index 8384c0fa206..617a9e28424 100644 --- a/arch/x86/kernel/cpu/microcode/amd_early.c +++ b/arch/x86/kernel/cpu/microcode/amd_early.c @@ -285,6 +285,15 @@ static void __init collect_cpu_sig_on_bsp(void *arg) uci->cpu_sig.sig = cpuid_eax(0x00000001); } + +static void __init get_bsp_sig(void) +{ + unsigned int bsp = boot_cpu_data.cpu_index; + struct ucode_cpu_info *uci = ucode_cpu_info + bsp; + + if (!uci->cpu_sig.sig) + smp_call_function_single(bsp, collect_cpu_sig_on_bsp, NULL, 1); +} #else void load_ucode_amd_ap(void) { @@ -337,31 +346,37 @@ void load_ucode_amd_ap(void) int __init save_microcode_in_initrd_amd(void) { + unsigned long cont; enum ucode_state ret; u32 eax; -#ifdef CONFIG_X86_32 - unsigned int bsp = boot_cpu_data.cpu_index; - struct ucode_cpu_info *uci = ucode_cpu_info + bsp; - - if (!uci->cpu_sig.sig) - smp_call_function_single(bsp, collect_cpu_sig_on_bsp, NULL, 1); + if (!container) + return -EINVAL; +#ifdef CONFIG_X86_32 + get_bsp_sig(); + cont = (unsigned long)container; +#else /* - * Take into account the fact that the ramdisk might get relocated - * and therefore we need to recompute the container's position in - * virtual memory space. + * We need the physical address of the container for both bitness since + * boot_params.hdr.ramdisk_image is a physical address. */ - container = (u8 *)(__va((u32)relocated_ramdisk) + - ((u32)container - boot_params.hdr.ramdisk_image)); + cont = __pa(container); #endif + + /* + * Take into account the fact that the ramdisk might get relocated and + * therefore we need to recompute the container's position in virtual + * memory space. + */ + if (relocated_ramdisk) + container = (u8 *)(__va(relocated_ramdisk) + + (cont - boot_params.hdr.ramdisk_image)); + if (ucode_new_rev) pr_info("microcode: updated early to new patch_level=0x%08x\n", ucode_new_rev); - if (!container) - return -EINVAL; - eax = cpuid_eax(0x00000001); eax = ((eax >> 8) & 0xf) + ((eax >> 20) & 0xff); diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c index ce2d0a2c3e4..0e25a1bc5ab 100644 --- a/arch/x86/kernel/cpu/mtrr/generic.c +++ b/arch/x86/kernel/cpu/mtrr/generic.c @@ -683,7 +683,7 @@ static void prepare_set(void) __acquires(set_atomicity_lock) } /* Flush all TLBs via a mov %cr3, %reg; mov %reg, %cr3 */ - count_vm_event(NR_TLB_LOCAL_FLUSH_ALL); + count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ALL); __flush_tlb(); /* Save MTRR state */ @@ -697,7 +697,7 @@ static void prepare_set(void) __acquires(set_atomicity_lock) static void post_set(void) __releases(set_atomicity_lock) { /* Flush TLBs (no need to flush caches - they are disabled) */ - count_vm_event(NR_TLB_LOCAL_FLUSH_ALL); + count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ALL); __flush_tlb(); /* Intel (P6) standard MTRRs */ diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c index b88645191fe..895604f2e91 100644 --- a/arch/x86/kernel/cpu/perf_event.c +++ b/arch/x86/kernel/cpu/perf_event.c @@ -1521,6 +1521,8 @@ static int __init init_hw_perf_events(void) pr_cont("%s PMU driver.\n", x86_pmu.name); + x86_pmu.attr_rdpmc = 1; /* enable userspace RDPMC usage by default */ + for (quirk = x86_pmu.quirks; quirk; quirk = quirk->next) quirk->func(); @@ -1534,7 +1536,6 @@ static int __init init_hw_perf_events(void) __EVENT_CONSTRAINT(0, (1ULL << x86_pmu.num_counters) - 1, 0, x86_pmu.num_counters, 0, 0); - x86_pmu.attr_rdpmc = 1; /* enable userspace RDPMC usage by default */ x86_pmu_format_group.attrs = x86_pmu.format_attrs; if (x86_pmu.event_attrs) @@ -1820,9 +1821,12 @@ static ssize_t set_attr_rdpmc(struct device *cdev, if (ret) return ret; + if (x86_pmu.attr_rdpmc_broken) + return -ENOTSUPP; + if (!!val != !!x86_pmu.attr_rdpmc) { x86_pmu.attr_rdpmc = !!val; - smp_call_function(change_rdpmc, (void *)val, 1); + on_each_cpu(change_rdpmc, (void *)val, 1); } return count; diff --git a/arch/x86/kernel/cpu/perf_event.h b/arch/x86/kernel/cpu/perf_event.h index c1a861829d8..4972c244d0b 100644 --- a/arch/x86/kernel/cpu/perf_event.h +++ b/arch/x86/kernel/cpu/perf_event.h @@ -409,6 +409,7 @@ struct x86_pmu { /* * sysfs attrs */ + int attr_rdpmc_broken; int attr_rdpmc; struct attribute **format_attrs; struct attribute **event_attrs; diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c index 0fa4f242f05..aa333d96688 100644 --- a/arch/x86/kernel/cpu/perf_event_intel.c +++ b/arch/x86/kernel/cpu/perf_event_intel.c @@ -1361,10 +1361,8 @@ static int intel_pmu_handle_irq(struct pt_regs *regs) intel_pmu_disable_all(); handled = intel_pmu_drain_bts_buffer(); status = intel_pmu_get_status(); - if (!status) { - intel_pmu_enable_all(0); - return handled; - } + if (!status) + goto done; loops = 0; again: @@ -2310,10 +2308,7 @@ __init int intel_pmu_init(void) if (version > 1) x86_pmu.num_counters_fixed = max((int)edx.split.num_counters_fixed, 3); - /* - * v2 and above have a perf capabilities MSR - */ - if (version > 1) { + if (boot_cpu_has(X86_FEATURE_PDCM)) { u64 capabilities; rdmsrl(MSR_IA32_PERF_CAPABILITIES, capabilities); diff --git a/arch/x86/kernel/cpu/perf_event_intel_uncore.c b/arch/x86/kernel/cpu/perf_event_intel_uncore.c index 29c248799ce..c88f7f4b03e 100644 --- a/arch/x86/kernel/cpu/perf_event_intel_uncore.c +++ b/arch/x86/kernel/cpu/perf_event_intel_uncore.c @@ -501,8 +501,11 @@ static struct extra_reg snbep_uncore_cbox_extra_regs[] = { SNBEP_CBO_EVENT_EXTRA_REG(SNBEP_CBO_PMON_CTL_TID_EN, SNBEP_CBO_PMON_CTL_TID_EN, 0x1), SNBEP_CBO_EVENT_EXTRA_REG(0x0334, 0xffff, 0x4), + SNBEP_CBO_EVENT_EXTRA_REG(0x4334, 0xffff, 0x6), SNBEP_CBO_EVENT_EXTRA_REG(0x0534, 0xffff, 0x4), + SNBEP_CBO_EVENT_EXTRA_REG(0x4534, 0xffff, 0x6), SNBEP_CBO_EVENT_EXTRA_REG(0x0934, 0xffff, 0x4), + SNBEP_CBO_EVENT_EXTRA_REG(0x4934, 0xffff, 0x6), SNBEP_CBO_EVENT_EXTRA_REG(0x4134, 0xffff, 0x6), SNBEP_CBO_EVENT_EXTRA_REG(0x0135, 0xffff, 0x8), SNBEP_CBO_EVENT_EXTRA_REG(0x0335, 0xffff, 0x8), @@ -1178,10 +1181,15 @@ static struct extra_reg ivt_uncore_cbox_extra_regs[] = { SNBEP_CBO_EVENT_EXTRA_REG(SNBEP_CBO_PMON_CTL_TID_EN, SNBEP_CBO_PMON_CTL_TID_EN, 0x1), SNBEP_CBO_EVENT_EXTRA_REG(0x1031, 0x10ff, 0x2), + SNBEP_CBO_EVENT_EXTRA_REG(0x1134, 0xffff, 0x4), + SNBEP_CBO_EVENT_EXTRA_REG(0x4134, 0xffff, 0xc), + SNBEP_CBO_EVENT_EXTRA_REG(0x5134, 0xffff, 0xc), SNBEP_CBO_EVENT_EXTRA_REG(0x0334, 0xffff, 0x4), + SNBEP_CBO_EVENT_EXTRA_REG(0x4334, 0xffff, 0xc), SNBEP_CBO_EVENT_EXTRA_REG(0x0534, 0xffff, 0x4), + SNBEP_CBO_EVENT_EXTRA_REG(0x4534, 0xffff, 0xc), SNBEP_CBO_EVENT_EXTRA_REG(0x0934, 0xffff, 0x4), - SNBEP_CBO_EVENT_EXTRA_REG(0x4134, 0xffff, 0xc), + SNBEP_CBO_EVENT_EXTRA_REG(0x4934, 0xffff, 0xc), SNBEP_CBO_EVENT_EXTRA_REG(0x0135, 0xffff, 0x10), SNBEP_CBO_EVENT_EXTRA_REG(0x0335, 0xffff, 0x10), SNBEP_CBO_EVENT_EXTRA_REG(0x2135, 0xffff, 0x10), diff --git a/arch/x86/kernel/cpu/perf_event_p6.c b/arch/x86/kernel/cpu/perf_event_p6.c index b1e2fe11532..7c1a0c07b60 100644 --- a/arch/x86/kernel/cpu/perf_event_p6.c +++ b/arch/x86/kernel/cpu/perf_event_p6.c @@ -231,31 +231,49 @@ static __initconst const struct x86_pmu p6_pmu = { }; +static __init void p6_pmu_rdpmc_quirk(void) +{ + if (boot_cpu_data.x86_mask < 9) { + /* + * PPro erratum 26; fixed in stepping 9 and above. + */ + pr_warn("Userspace RDPMC support disabled due to a CPU erratum\n"); + x86_pmu.attr_rdpmc_broken = 1; + x86_pmu.attr_rdpmc = 0; + } +} + __init int p6_pmu_init(void) { + x86_pmu = p6_pmu; + switch (boot_cpu_data.x86_model) { - case 1: - case 3: /* Pentium Pro */ - case 5: - case 6: /* Pentium II */ - case 7: - case 8: - case 11: /* Pentium III */ - case 9: - case 13: - /* Pentium M */ + case 1: /* Pentium Pro */ + x86_add_quirk(p6_pmu_rdpmc_quirk); + break; + + case 3: /* Pentium II - Klamath */ + case 5: /* Pentium II - Deschutes */ + case 6: /* Pentium II - Mendocino */ break; + + case 7: /* Pentium III - Katmai */ + case 8: /* Pentium III - Coppermine */ + case 10: /* Pentium III Xeon */ + case 11: /* Pentium III - Tualatin */ + break; + + case 9: /* Pentium M - Banias */ + case 13: /* Pentium M - Dothan */ + break; + default: - pr_cont("unsupported p6 CPU model %d ", - boot_cpu_data.x86_model); + pr_cont("unsupported p6 CPU model %d ", boot_cpu_data.x86_model); return -ENODEV; } - x86_pmu = p6_pmu; - memcpy(hw_cache_event_ids, p6_hw_cache_event_ids, sizeof(hw_cache_event_ids)); - return 0; } diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c index d4bdd253fea..e6253195a30 100644 --- a/arch/x86/kernel/ftrace.c +++ b/arch/x86/kernel/ftrace.c @@ -77,8 +77,7 @@ within(unsigned long addr, unsigned long start, unsigned long end) return addr >= start && addr < end; } -static int -do_ftrace_mod_code(unsigned long ip, const void *new_code) +static unsigned long text_ip_addr(unsigned long ip) { /* * On x86_64, kernel text mappings are mapped read-only with @@ -91,7 +90,7 @@ do_ftrace_mod_code(unsigned long ip, const void *new_code) if (within(ip, (unsigned long)_text, (unsigned long)_etext)) ip = (unsigned long)__va(__pa_symbol(ip)); - return probe_kernel_write((void *)ip, new_code, MCOUNT_INSN_SIZE); + return ip; } static const unsigned char *ftrace_nop_replace(void) @@ -123,8 +122,10 @@ ftrace_modify_code_direct(unsigned long ip, unsigned const char *old_code, if (memcmp(replaced, old_code, MCOUNT_INSN_SIZE) != 0) return -EINVAL; + ip = text_ip_addr(ip); + /* replace the text with the new text */ - if (do_ftrace_mod_code(ip, new_code)) + if (probe_kernel_write((void *)ip, new_code, MCOUNT_INSN_SIZE)) return -EPERM; sync_core(); @@ -221,37 +222,51 @@ int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr, return -EINVAL; } -int ftrace_update_ftrace_func(ftrace_func_t func) +static unsigned long ftrace_update_func; + +static int update_ftrace_func(unsigned long ip, void *new) { - unsigned long ip = (unsigned long)(&ftrace_call); - unsigned char old[MCOUNT_INSN_SIZE], *new; + unsigned char old[MCOUNT_INSN_SIZE]; int ret; - memcpy(old, &ftrace_call, MCOUNT_INSN_SIZE); - new = ftrace_call_replace(ip, (unsigned long)func); + memcpy(old, (void *)ip, MCOUNT_INSN_SIZE); + + ftrace_update_func = ip; + /* Make sure the breakpoints see the ftrace_update_func update */ + smp_wmb(); /* See comment above by declaration of modifying_ftrace_code */ atomic_inc(&modifying_ftrace_code); ret = ftrace_modify_code(ip, old, new); + atomic_dec(&modifying_ftrace_code); + + return ret; +} + +int ftrace_update_ftrace_func(ftrace_func_t func) +{ + unsigned long ip = (unsigned long)(&ftrace_call); + unsigned char *new; + int ret; + + new = ftrace_call_replace(ip, (unsigned long)func); + ret = update_ftrace_func(ip, new); + /* Also update the regs callback function */ if (!ret) { ip = (unsigned long)(&ftrace_regs_call); - memcpy(old, &ftrace_regs_call, MCOUNT_INSN_SIZE); new = ftrace_call_replace(ip, (unsigned long)func); - ret = ftrace_modify_code(ip, old, new); + ret = update_ftrace_func(ip, new); } - atomic_dec(&modifying_ftrace_code); - return ret; } static int is_ftrace_caller(unsigned long ip) { - if (ip == (unsigned long)(&ftrace_call) || - ip == (unsigned long)(&ftrace_regs_call)) + if (ip == ftrace_update_func) return 1; return 0; @@ -677,45 +692,41 @@ int __init ftrace_dyn_arch_init(void *data) #ifdef CONFIG_DYNAMIC_FTRACE extern void ftrace_graph_call(void); -static int ftrace_mod_jmp(unsigned long ip, - int old_offset, int new_offset) +static unsigned char *ftrace_jmp_replace(unsigned long ip, unsigned long addr) { - unsigned char code[MCOUNT_INSN_SIZE]; + static union ftrace_code_union calc; - if (probe_kernel_read(code, (void *)ip, MCOUNT_INSN_SIZE)) - return -EFAULT; + /* Jmp not a call (ignore the .e8) */ + calc.e8 = 0xe9; + calc.offset = ftrace_calc_offset(ip + MCOUNT_INSN_SIZE, addr); - if (code[0] != 0xe9 || old_offset != *(int *)(&code[1])) - return -EINVAL; + /* + * ftrace external locks synchronize the access to the static variable. + */ + return calc.code; +} - *(int *)(&code[1]) = new_offset; +static int ftrace_mod_jmp(unsigned long ip, void *func) +{ + unsigned char *new; - if (do_ftrace_mod_code(ip, &code)) - return -EPERM; + new = ftrace_jmp_replace(ip, (unsigned long)func); - return 0; + return update_ftrace_func(ip, new); } int ftrace_enable_ftrace_graph_caller(void) { unsigned long ip = (unsigned long)(&ftrace_graph_call); - int old_offset, new_offset; - old_offset = (unsigned long)(&ftrace_stub) - (ip + MCOUNT_INSN_SIZE); - new_offset = (unsigned long)(&ftrace_graph_caller) - (ip + MCOUNT_INSN_SIZE); - - return ftrace_mod_jmp(ip, old_offset, new_offset); + return ftrace_mod_jmp(ip, &ftrace_graph_caller); } int ftrace_disable_ftrace_graph_caller(void) { unsigned long ip = (unsigned long)(&ftrace_graph_call); - int old_offset, new_offset; - - old_offset = (unsigned long)(&ftrace_graph_caller) - (ip + MCOUNT_INSN_SIZE); - new_offset = (unsigned long)(&ftrace_stub) - (ip + MCOUNT_INSN_SIZE); - return ftrace_mod_jmp(ip, old_offset, new_offset); + return ftrace_mod_jmp(ip, &ftrace_stub); } #endif /* !CONFIG_DYNAMIC_FTRACE */ diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c index dbb60878b74..d99f31d9a75 100644 --- a/arch/x86/kernel/irq.c +++ b/arch/x86/kernel/irq.c @@ -266,6 +266,14 @@ __visible void smp_trace_x86_platform_ipi(struct pt_regs *regs) EXPORT_SYMBOL_GPL(vector_used_by_percpu_irq); #ifdef CONFIG_HOTPLUG_CPU + +/* These two declarations are only used in check_irq_vectors_for_cpu_disable() + * below, which is protected by stop_machine(). Putting them on the stack + * results in a stack frame overflow. Dynamically allocating could result in a + * failure so declare these two cpumasks as global. + */ +static struct cpumask affinity_new, online_new; + /* * This cpu is going to be removed and its vectors migrated to the remaining * online cpus. Check to see if there are enough vectors in the remaining cpus. @@ -277,7 +285,6 @@ int check_irq_vectors_for_cpu_disable(void) unsigned int this_cpu, vector, this_count, count; struct irq_desc *desc; struct irq_data *data; - struct cpumask affinity_new, online_new; this_cpu = smp_processor_id(); cpumask_copy(&online_new, cpu_online_mask); diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c index 872079a67e4..f7d0672481f 100644 --- a/arch/x86/kernel/pci-dma.c +++ b/arch/x86/kernel/pci-dma.c @@ -100,8 +100,10 @@ void *dma_generic_alloc_coherent(struct device *dev, size_t size, flag |= __GFP_ZERO; again: page = NULL; - if (!(flag & GFP_ATOMIC)) + /* CMA can be used only in the context which permits sleeping */ + if (flag & __GFP_WAIT) page = dma_alloc_from_contiguous(dev, count, get_order(size)); + /* fallback */ if (!page) page = alloc_pages_node(dev_to_node(dev), flag, get_order(size)); if (!page) diff --git a/arch/x86/kernel/quirks.c b/arch/x86/kernel/quirks.c index 04ee1e2e4c0..7c6acd4b899 100644 --- a/arch/x86/kernel/quirks.c +++ b/arch/x86/kernel/quirks.c @@ -571,3 +571,40 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F5, quirk_amd_nb_node); #endif + +#ifdef CONFIG_PCI +/* + * Processor does not ensure DRAM scrub read/write sequence + * is atomic wrt accesses to CC6 save state area. Therefore + * if a concurrent scrub read/write access is to same address + * the entry may appear as if it is not written. This quirk + * applies to Fam16h models 00h-0Fh + * + * See "Revision Guide" for AMD F16h models 00h-0fh, + * document 51810 rev. 3.04, Nov 2013 + */ +static void amd_disable_seq_and_redirect_scrub(struct pci_dev *dev) +{ + u32 val; + + /* + * Suggested workaround: + * set D18F3x58[4:0] = 00h and set D18F3x5C[0] = 0b + */ + pci_read_config_dword(dev, 0x58, &val); + if (val & 0x1F) { + val &= ~(0x1F); + pci_write_config_dword(dev, 0x58, val); + } + + pci_read_config_dword(dev, 0x5C, &val); + if (val & BIT(0)) { + val &= ~BIT(0); + pci_write_config_dword(dev, 0x5c, val); + } +} + +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_16H_NB_F3, + amd_disable_seq_and_redirect_scrub); + +#endif diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c index 19e5adb49a2..cfbe99f8883 100644 --- a/arch/x86/kernel/tsc.c +++ b/arch/x86/kernel/tsc.c @@ -209,7 +209,7 @@ static inline unsigned long long cycles_2_ns(unsigned long long cyc) * dance when its actually needed. */ - preempt_disable(); + preempt_disable_notrace(); data = this_cpu_read(cyc2ns.head); tail = this_cpu_read(cyc2ns.tail); @@ -229,7 +229,7 @@ static inline unsigned long long cycles_2_ns(unsigned long long cyc) if (!--data->__count) this_cpu_write(cyc2ns.tail, data); } - preempt_enable(); + preempt_enable_notrace(); return ns; } @@ -653,13 +653,10 @@ unsigned long native_calibrate_tsc(void) /* Calibrate TSC using MSR for Intel Atom SoCs */ local_irq_save(flags); - i = try_msr_calibrate_tsc(&fast_calibrate); + fast_calibrate = try_msr_calibrate_tsc(); local_irq_restore(flags); - if (i >= 0) { - if (i == 0) - pr_warn("Fast TSC calibration using MSR failed\n"); + if (fast_calibrate) return fast_calibrate; - } local_irq_save(flags); fast_calibrate = quick_pit_calibrate(); diff --git a/arch/x86/kernel/tsc_msr.c b/arch/x86/kernel/tsc_msr.c index 8b5434f4389..92ae6acac8a 100644 --- a/arch/x86/kernel/tsc_msr.c +++ b/arch/x86/kernel/tsc_msr.c @@ -53,7 +53,7 @@ static struct freq_desc freq_desc_tables[] = { /* TNG */ { 6, 0x4a, 1, { 0, FREQ_100, FREQ_133, 0, 0, 0, 0, 0 } }, /* VLV2 */ - { 6, 0x37, 1, { 0, FREQ_100, FREQ_133, FREQ_166, 0, 0, 0, 0 } }, + { 6, 0x37, 1, { FREQ_83, FREQ_100, FREQ_133, FREQ_166, 0, 0, 0, 0 } }, /* ANN */ { 6, 0x5a, 1, { FREQ_83, FREQ_100, FREQ_133, FREQ_100, 0, 0, 0, 0 } }, }; @@ -77,21 +77,18 @@ static int match_cpu(u8 family, u8 model) /* * Do MSR calibration only for known/supported CPUs. - * Return values: - * -1: CPU is unknown/unsupported for MSR based calibration - * 0: CPU is known/supported, but calibration failed - * 1: CPU is known/supported, and calibration succeeded + * + * Returns the calibration value or 0 if MSR calibration failed. */ -int try_msr_calibrate_tsc(unsigned long *fast_calibrate) +unsigned long try_msr_calibrate_tsc(void) { - int cpu_index; u32 lo, hi, ratio, freq_id, freq; + unsigned long res; + int cpu_index; cpu_index = match_cpu(boot_cpu_data.x86, boot_cpu_data.x86_model); if (cpu_index < 0) - return -1; - - *fast_calibrate = 0; + return 0; if (freq_desc_tables[cpu_index].msr_plat) { rdmsr(MSR_PLATFORM_INFO, lo, hi); @@ -103,7 +100,7 @@ int try_msr_calibrate_tsc(unsigned long *fast_calibrate) pr_info("Maximum core-clock to bus-clock ratio: 0x%x\n", ratio); if (!ratio) - return 0; + goto fail; /* Get FSB FREQ ID */ rdmsr(MSR_FSB_FREQ, lo, hi); @@ -112,16 +109,19 @@ int try_msr_calibrate_tsc(unsigned long *fast_calibrate) pr_info("Resolved frequency ID: %u, frequency: %u KHz\n", freq_id, freq); if (!freq) - return 0; + goto fail; /* TSC frequency = maximum resolved freq * maximum resolved bus ratio */ - *fast_calibrate = freq * ratio; - pr_info("TSC runs at %lu KHz\n", *fast_calibrate); + res = freq * ratio; + pr_info("TSC runs at %lu KHz\n", res); #ifdef CONFIG_X86_LOCAL_APIC lapic_timer_frequency = (freq * 1000) / HZ; pr_info("lapic_timer_frequency = %d\n", lapic_timer_frequency); #endif + return res; - return 1; +fail: + pr_warn("Fast TSC calibration using MSR failed\n"); + return 0; } diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c index 9d591c89580..6dea040cc3a 100644 --- a/arch/x86/mm/fault.c +++ b/arch/x86/mm/fault.c @@ -1001,6 +1001,12 @@ static int fault_in_kernel_space(unsigned long address) static inline bool smap_violation(int error_code, struct pt_regs *regs) { + if (!IS_ENABLED(CONFIG_X86_SMAP)) + return false; + + if (!static_cpu_has(X86_FEATURE_SMAP)) + return false; + if (error_code & PF_USER) return false; @@ -1087,11 +1093,9 @@ __do_page_fault(struct pt_regs *regs, unsigned long error_code) if (unlikely(error_code & PF_RSVD)) pgtable_bad(regs, error_code, address); - if (static_cpu_has(X86_FEATURE_SMAP)) { - if (unlikely(smap_violation(error_code, regs))) { - bad_area_nosemaphore(regs, error_code, address); - return; - } + if (unlikely(smap_violation(error_code, regs))) { + bad_area_nosemaphore(regs, error_code, address); + return; } /* diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c index 81b2750f366..27aa0455fab 100644 --- a/arch/x86/mm/numa.c +++ b/arch/x86/mm/numa.c @@ -493,14 +493,6 @@ static int __init numa_register_memblks(struct numa_meminfo *mi) struct numa_memblk *mb = &mi->blk[i]; memblock_set_node(mb->start, mb->end - mb->start, &memblock.memory, mb->nid); - - /* - * At this time, all memory regions reserved by memblock are - * used by the kernel. Set the nid in memblock.reserved will - * mark out all the nodes the kernel resides in. - */ - memblock_set_node(mb->start, mb->end - mb->start, - &memblock.reserved, mb->nid); } /* @@ -565,10 +557,21 @@ static void __init numa_init_array(void) static void __init numa_clear_kernel_node_hotplug(void) { int i, nid; - nodemask_t numa_kernel_nodes; + nodemask_t numa_kernel_nodes = NODE_MASK_NONE; unsigned long start, end; struct memblock_type *type = &memblock.reserved; + /* + * At this time, all memory regions reserved by memblock are + * used by the kernel. Set the nid in memblock.reserved will + * mark out all the nodes the kernel resides in. + */ + for (i = 0; i < numa_meminfo.nr_blks; i++) { + struct numa_memblk *mb = &numa_meminfo.blk[i]; + memblock_set_node(mb->start, mb->end - mb->start, + &memblock.reserved, mb->nid); + } + /* Mark all kernel nodes. */ for (i = 0; i < type->cnt; i++) node_set(type->regions[i].nid, numa_kernel_nodes); diff --git a/arch/x86/mm/numa_32.c b/arch/x86/mm/numa_32.c index 0342d27ca79..47b6436e41c 100644 --- a/arch/x86/mm/numa_32.c +++ b/arch/x86/mm/numa_32.c @@ -52,6 +52,8 @@ void memory_present(int nid, unsigned long start, unsigned long end) nid, start, end); printk(KERN_DEBUG " Setting physnode_map array to node %d for pfns:\n", nid); printk(KERN_DEBUG " "); + start = round_down(start, PAGES_PER_SECTION); + end = round_up(end, PAGES_PER_SECTION); for (pfn = start; pfn < end; pfn += PAGES_PER_SECTION) { physnode_map[pfn / PAGES_PER_SECTION] = nid; printk(KERN_CONT "%lx ", pfn); diff --git a/arch/x86/mm/srat.c b/arch/x86/mm/srat.c index 1a25187e151..1953e9c9391 100644 --- a/arch/x86/mm/srat.c +++ b/arch/x86/mm/srat.c @@ -42,15 +42,25 @@ static __init inline int srat_disabled(void) return acpi_numa < 0; } -/* Callback for SLIT parsing */ +/* + * Callback for SLIT parsing. pxm_to_node() returns NUMA_NO_NODE for + * I/O localities since SRAT does not list them. I/O localities are + * not supported at this point. + */ void __init acpi_numa_slit_init(struct acpi_table_slit *slit) { int i, j; - for (i = 0; i < slit->locality_count; i++) - for (j = 0; j < slit->locality_count; j++) + for (i = 0; i < slit->locality_count; i++) { + if (pxm_to_node(i) == NUMA_NO_NODE) + continue; + for (j = 0; j < slit->locality_count; j++) { + if (pxm_to_node(j) == NUMA_NO_NODE) + continue; numa_set_distance(pxm_to_node(i), pxm_to_node(j), slit->entry[slit->locality_count * i + j]); + } + } } /* Callback for Proximity Domain -> x2APIC mapping */ diff --git a/arch/x86/mm/tlb.c b/arch/x86/mm/tlb.c index ae699b3bbac..dd8dda167a2 100644 --- a/arch/x86/mm/tlb.c +++ b/arch/x86/mm/tlb.c @@ -103,7 +103,7 @@ static void flush_tlb_func(void *info) if (f->flush_mm != this_cpu_read(cpu_tlbstate.active_mm)) return; - count_vm_event(NR_TLB_REMOTE_FLUSH_RECEIVED); + count_vm_tlb_event(NR_TLB_REMOTE_FLUSH_RECEIVED); if (this_cpu_read(cpu_tlbstate.state) == TLBSTATE_OK) { if (f->flush_end == TLB_FLUSH_ALL) local_flush_tlb(); @@ -131,7 +131,7 @@ void native_flush_tlb_others(const struct cpumask *cpumask, info.flush_start = start; info.flush_end = end; - count_vm_event(NR_TLB_REMOTE_FLUSH); + count_vm_tlb_event(NR_TLB_REMOTE_FLUSH); if (is_uv_system()) { unsigned int cpu; @@ -151,44 +151,19 @@ void flush_tlb_current_task(void) preempt_disable(); - count_vm_event(NR_TLB_LOCAL_FLUSH_ALL); + count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ALL); local_flush_tlb(); if (cpumask_any_but(mm_cpumask(mm), smp_processor_id()) < nr_cpu_ids) flush_tlb_others(mm_cpumask(mm), mm, 0UL, TLB_FLUSH_ALL); preempt_enable(); } -/* - * It can find out the THP large page, or - * HUGETLB page in tlb_flush when THP disabled - */ -static inline unsigned long has_large_page(struct mm_struct *mm, - unsigned long start, unsigned long end) -{ - pgd_t *pgd; - pud_t *pud; - pmd_t *pmd; - unsigned long addr = ALIGN(start, HPAGE_SIZE); - for (; addr < end; addr += HPAGE_SIZE) { - pgd = pgd_offset(mm, addr); - if (likely(!pgd_none(*pgd))) { - pud = pud_offset(pgd, addr); - if (likely(!pud_none(*pud))) { - pmd = pmd_offset(pud, addr); - if (likely(!pmd_none(*pmd))) - if (pmd_large(*pmd)) - return addr; - } - } - } - return 0; -} - void flush_tlb_mm_range(struct mm_struct *mm, unsigned long start, unsigned long end, unsigned long vmflag) { unsigned long addr; unsigned act_entries, tlb_entries = 0; + unsigned long nr_base_pages; preempt_disable(); if (current->active_mm != mm) @@ -210,21 +185,20 @@ void flush_tlb_mm_range(struct mm_struct *mm, unsigned long start, tlb_entries = tlb_lli_4k[ENTRIES]; else tlb_entries = tlb_lld_4k[ENTRIES]; + /* Assume all of TLB entries was occupied by this task */ - act_entries = mm->total_vm > tlb_entries ? tlb_entries : mm->total_vm; + act_entries = tlb_entries >> tlb_flushall_shift; + act_entries = mm->total_vm > act_entries ? act_entries : mm->total_vm; + nr_base_pages = (end - start) >> PAGE_SHIFT; /* tlb_flushall_shift is on balance point, details in commit log */ - if ((end - start) >> PAGE_SHIFT > act_entries >> tlb_flushall_shift) { - count_vm_event(NR_TLB_LOCAL_FLUSH_ALL); + if (nr_base_pages > act_entries) { + count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ALL); local_flush_tlb(); } else { - if (has_large_page(mm, start, end)) { - local_flush_tlb(); - goto flush_all; - } /* flush range by one by one 'invlpg' */ for (addr = start; addr < end; addr += PAGE_SIZE) { - count_vm_event(NR_TLB_LOCAL_FLUSH_ONE); + count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ONE); __flush_tlb_single(addr); } @@ -262,7 +236,7 @@ void flush_tlb_page(struct vm_area_struct *vma, unsigned long start) static void do_flush_tlb_all(void *info) { - count_vm_event(NR_TLB_REMOTE_FLUSH_RECEIVED); + count_vm_tlb_event(NR_TLB_REMOTE_FLUSH_RECEIVED); __flush_tlb_all(); if (this_cpu_read(cpu_tlbstate.state) == TLBSTATE_LAZY) leave_mm(smp_processor_id()); @@ -270,7 +244,7 @@ static void do_flush_tlb_all(void *info) void flush_tlb_all(void) { - count_vm_event(NR_TLB_REMOTE_FLUSH); + count_vm_tlb_event(NR_TLB_REMOTE_FLUSH); on_each_cpu(do_flush_tlb_all, NULL, 1); } diff --git a/arch/x86/platform/efi/efi-bgrt.c b/arch/x86/platform/efi/efi-bgrt.c index 7145ec63c52..f15103dff4b 100644 --- a/arch/x86/platform/efi/efi-bgrt.c +++ b/arch/x86/platform/efi/efi-bgrt.c @@ -42,14 +42,15 @@ void __init efi_bgrt_init(void) if (bgrt_tab->header.length < sizeof(*bgrt_tab)) return; - if (bgrt_tab->version != 1) + if (bgrt_tab->version != 1 || bgrt_tab->status != 1) return; if (bgrt_tab->image_type != 0 || !bgrt_tab->image_address) return; image = efi_lookup_mapped_addr(bgrt_tab->image_address); if (!image) { - image = ioremap(bgrt_tab->image_address, sizeof(bmp_header)); + image = early_memremap(bgrt_tab->image_address, + sizeof(bmp_header)); ioremapped = true; if (!image) return; @@ -57,7 +58,7 @@ void __init efi_bgrt_init(void) memcpy_fromio(&bmp_header, image, sizeof(bmp_header)); if (ioremapped) - iounmap(image); + early_iounmap(image, sizeof(bmp_header)); bgrt_image_size = bmp_header.size; bgrt_image = kmalloc(bgrt_image_size, GFP_KERNEL); @@ -65,7 +66,8 @@ void __init efi_bgrt_init(void) return; if (ioremapped) { - image = ioremap(bgrt_tab->image_address, bmp_header.size); + image = early_memremap(bgrt_tab->image_address, + bmp_header.size); if (!image) { kfree(bgrt_image); bgrt_image = NULL; @@ -75,5 +77,5 @@ void __init efi_bgrt_init(void) memcpy_fromio(bgrt_image, image, bgrt_image_size); if (ioremapped) - iounmap(image); + early_iounmap(image, bmp_header.size); } diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c index d62ec87a2b2..1a201ac7cef 100644 --- a/arch/x86/platform/efi/efi.c +++ b/arch/x86/platform/efi/efi.c @@ -792,7 +792,7 @@ void __init efi_set_executable(efi_memory_desc_t *md, bool executable) set_memory_nx(addr, npages); } -static void __init runtime_code_page_mkexec(void) +void __init runtime_code_page_mkexec(void) { efi_memory_desc_t *md; void *p; @@ -1069,8 +1069,7 @@ void __init efi_enter_virtual_mode(void) efi.update_capsule = virt_efi_update_capsule; efi.query_capsule_caps = virt_efi_query_capsule_caps; - if (efi_enabled(EFI_OLD_MEMMAP) && (__supported_pte_mask & _PAGE_NX)) - runtime_code_page_mkexec(); + efi_runtime_mkexec(); kfree(new_memmap); diff --git a/arch/x86/platform/efi/efi_32.c b/arch/x86/platform/efi/efi_32.c index 249b183cf41..0b74cdf7f81 100644 --- a/arch/x86/platform/efi/efi_32.c +++ b/arch/x86/platform/efi/efi_32.c @@ -77,3 +77,9 @@ void efi_call_phys_epilog(void) local_irq_restore(efi_rt_eflags); } + +void __init efi_runtime_mkexec(void) +{ + if (__supported_pte_mask & _PAGE_NX) + runtime_code_page_mkexec(); +} diff --git a/arch/x86/platform/efi/efi_64.c b/arch/x86/platform/efi/efi_64.c index 6284f158a47..0c2a234fef1 100644 --- a/arch/x86/platform/efi/efi_64.c +++ b/arch/x86/platform/efi/efi_64.c @@ -233,3 +233,12 @@ void __init parse_efi_setup(u64 phys_addr, u32 data_len) { efi_setup = phys_addr + sizeof(struct setup_data); } + +void __init efi_runtime_mkexec(void) +{ + if (!efi_enabled(EFI_OLD_MEMMAP)) + return; + + if (__supported_pte_mask & _PAGE_NX) + runtime_code_page_mkexec(); +} diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index a4d7b647867..201d09a7c46 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -1473,6 +1473,18 @@ static void xen_pvh_set_cr_flags(int cpu) * X86_CR0_TS, X86_CR0_PE, X86_CR0_ET are set by Xen for HVM guests * (which PVH shared codepaths), while X86_CR0_PG is for PVH. */ write_cr0(read_cr0() | X86_CR0_MP | X86_CR0_NE | X86_CR0_WP | X86_CR0_AM); + + if (!cpu) + return; + /* + * For BSP, PSE PGE are set in probe_page_size_mask(), for APs + * set them here. For all, OSFXSR OSXMMEXCPT are set in fpu_init. + */ + if (cpu_has_pse) + set_in_cr4(X86_CR4_PSE); + + if (cpu_has_pge) + set_in_cr4(X86_CR4_PGE); } /* diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index 2423ef04ffe..256282e7888 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -365,7 +365,7 @@ void xen_ptep_modify_prot_commit(struct mm_struct *mm, unsigned long addr, /* Assume pteval_t is equivalent to all the other *val_t types. */ static pteval_t pte_mfn_to_pfn(pteval_t val) { - if (val & _PAGE_PRESENT) { + if (pteval_present(val)) { unsigned long mfn = (val & PTE_PFN_MASK) >> PAGE_SHIFT; unsigned long pfn = mfn_to_pfn(mfn); @@ -381,7 +381,7 @@ static pteval_t pte_mfn_to_pfn(pteval_t val) static pteval_t pte_pfn_to_mfn(pteval_t val) { - if (val & _PAGE_PRESENT) { + if (pteval_present(val)) { unsigned long pfn = (val & PTE_PFN_MASK) >> PAGE_SHIFT; pteval_t flags = val & PTE_FLAGS_MASK; unsigned long mfn; diff --git a/arch/x86/xen/p2m.c b/arch/x86/xen/p2m.c index 8009acbe41e..696c694986d 100644 --- a/arch/x86/xen/p2m.c +++ b/arch/x86/xen/p2m.c @@ -899,6 +899,13 @@ int m2p_add_override(unsigned long mfn, struct page *page, "m2p_add_override: pfn %lx not mapped", pfn)) return -EINVAL; } + WARN_ON(PagePrivate(page)); + SetPagePrivate(page); + set_page_private(page, mfn); + page->index = pfn_to_mfn(pfn); + + if (unlikely(!set_phys_to_machine(pfn, FOREIGN_FRAME(mfn)))) + return -ENOMEM; if (kmap_op != NULL) { if (!PageHighMem(page)) { @@ -937,16 +944,19 @@ int m2p_add_override(unsigned long mfn, struct page *page, } EXPORT_SYMBOL_GPL(m2p_add_override); int m2p_remove_override(struct page *page, - struct gnttab_map_grant_ref *kmap_op, - unsigned long mfn) + struct gnttab_map_grant_ref *kmap_op) { unsigned long flags; + unsigned long mfn; unsigned long pfn; unsigned long uninitialized_var(address); unsigned level; pte_t *ptep = NULL; pfn = page_to_pfn(page); + mfn = get_phys_to_machine(pfn); + if (mfn == INVALID_P2M_ENTRY || !(mfn & FOREIGN_FRAME_BIT)) + return -EINVAL; if (!PageHighMem(page)) { address = (unsigned long)__va(pfn << PAGE_SHIFT); @@ -960,7 +970,10 @@ int m2p_remove_override(struct page *page, spin_lock_irqsave(&m2p_override_lock, flags); list_del(&page->lru); spin_unlock_irqrestore(&m2p_override_lock, flags); + WARN_ON(!PagePrivate(page)); + ClearPagePrivate(page); + set_phys_to_machine(pfn, page->index); if (kmap_op != NULL) { if (!PageHighMem(page)) { struct multicall_space mcs; |