summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/boot/dts/imx27-phytec-phycore.dts2
-rw-r--r--arch/arm/mach-imx/Makefile2
-rw-r--r--arch/arm/mach-imx/clk-imx21.c1
-rw-r--r--arch/arm/mach-imx/clk-imx51-imx53.c4
-rw-r--r--arch/arm/mach-imx/clk-pllv1.c49
-rw-r--r--arch/arm/mach-imx/clk.c3
-rw-r--r--arch/arm/mach-imx/clk.h3
-rw-r--r--arch/arm/mach-imx/mach-kzm_arm11_01.c1
-rw-r--r--arch/arm/plat-mxc/Makefile2
-rw-r--r--arch/arm/plat-mxc/clock.c257
-rw-r--r--arch/arm/plat-mxc/cpufreq.c1
-rw-r--r--arch/arm/plat-mxc/devices/platform-imx-uart.c2
-rw-r--r--arch/arm/plat-mxc/include/mach/clock.h70
-rw-r--r--arch/arm/plat-mxc/include/mach/mx2_cam.h2
-rw-r--r--arch/arm/plat-mxc/system.c4
15 files changed, 58 insertions, 345 deletions
diff --git a/arch/arm/boot/dts/imx27-phytec-phycore.dts b/arch/arm/boot/dts/imx27-phytec-phycore.dts
index 2b0ff60247a..2acc86cfdd0 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycore.dts
+++ b/arch/arm/boot/dts/imx27-phytec-phycore.dts
@@ -49,7 +49,7 @@
i2c@1001d000 {
clock-frequency = <400000>;
status = "okay";
- at24@4c {
+ at24@52 {
compatible = "at,24c32";
pagesize = <32>;
reg = <0x52>;
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index d004d37ad9d..d1204198ca8 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -13,7 +13,7 @@ imx5-pm-$(CONFIG_PM) += pm-imx5.o
obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o $(imx5-pm-y) cpu_op-mx51.o
obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \
- clk-pfd.o clk-busy.o
+ clk-pfd.o clk-busy.o clk.o
# Support for CMOS sensor interface
obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o
diff --git a/arch/arm/mach-imx/clk-imx21.c b/arch/arm/mach-imx/clk-imx21.c
index ea13e61bd5f..cf65148bc51 100644
--- a/arch/arm/mach-imx/clk-imx21.c
+++ b/arch/arm/mach-imx/clk-imx21.c
@@ -23,7 +23,6 @@
#include <linux/clk-provider.h>
#include <linux/io.h>
#include <linux/module.h>
-#include <linux/clkdev.h>
#include <linux/err.h>
#include <mach/hardware.h>
diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c
index 4bdcaa97bd9..f89c4403a92 100644
--- a/arch/arm/mach-imx/clk-imx51-imx53.c
+++ b/arch/arm/mach-imx/clk-imx51-imx53.c
@@ -39,10 +39,10 @@ static const char *ssi_ext2_com_sels[] = { "ssi_ext2_podf", "ssi2_root_gate", };
static const char *emi_slow_sel[] = { "main_bus", "ahb", };
static const char *usb_phy_sel_str[] = { "osc", "usb_phy_podf", };
static const char *mx51_ipu_di0_sel[] = { "di_pred", "osc", "ckih1", "tve_di", };
-static const char *mx53_ipu_di0_sel[] = { "di_pred", "osc", "ckih1", "di_pll4_podf", "dummy", "ldb_di0", };
+static const char *mx53_ipu_di0_sel[] = { "di_pred", "osc", "ckih1", "di_pll4_podf", "dummy", "ldb_di0_gate", };
static const char *mx53_ldb_di0_sel[] = { "pll3_sw", "pll4_sw", };
static const char *mx51_ipu_di1_sel[] = { "di_pred", "osc", "ckih1", "tve_di", "ipp_di1", };
-static const char *mx53_ipu_di1_sel[] = { "di_pred", "osc", "ckih1", "tve_di", "ipp_di1", "ldb_di1", };
+static const char *mx53_ipu_di1_sel[] = { "di_pred", "osc", "ckih1", "tve_di", "ipp_di1", "ldb_di1_gate", };
static const char *mx53_ldb_di1_sel[] = { "pll3_sw", "pll4_sw", };
static const char *mx51_tve_ext_sel[] = { "osc", "ckih1", };
static const char *mx53_tve_ext_sel[] = { "pll4_sw", "ckih1", };
diff --git a/arch/arm/mach-imx/clk-pllv1.c b/arch/arm/mach-imx/clk-pllv1.c
index 2d856f9ccf5..02be7317891 100644
--- a/arch/arm/mach-imx/clk-pllv1.c
+++ b/arch/arm/mach-imx/clk-pllv1.c
@@ -6,7 +6,7 @@
#include <linux/err.h>
#include <mach/common.h>
#include <mach/hardware.h>
-#include <mach/clock.h>
+
#include "clk.h"
/**
@@ -29,8 +29,53 @@ static unsigned long clk_pllv1_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
struct clk_pllv1 *pll = to_clk_pllv1(hw);
+ long long ll;
+ int mfn_abs;
+ unsigned int mfi, mfn, mfd, pd;
+ u32 reg;
+ unsigned long rate;
+
+ reg = readl(pll->base);
+
+ /*
+ * Get the resulting clock rate from a PLL register value and the input
+ * frequency. PLLs with this register layout can be found on i.MX1,
+ * i.MX21, i.MX27 and i,MX31
+ *
+ * mfi + mfn / (mfd + 1)
+ * f = 2 * f_ref * --------------------
+ * pd + 1
+ */
+
+ mfi = (reg >> 10) & 0xf;
+ mfn = reg & 0x3ff;
+ mfd = (reg >> 16) & 0x3ff;
+ pd = (reg >> 26) & 0xf;
+
+ mfi = mfi <= 5 ? 5 : mfi;
+
+ mfn_abs = mfn;
+
+ /*
+ * On all i.MXs except i.MX1 and i.MX21 mfn is a 10bit
+ * 2's complements number
+ */
+ if (!cpu_is_mx1() && !cpu_is_mx21() && mfn >= 0x200)
+ mfn_abs = 0x400 - mfn;
+
+ rate = parent_rate * 2;
+ rate /= pd + 1;
+
+ ll = (unsigned long long)rate * mfn_abs;
+
+ do_div(ll, mfd + 1);
+
+ if (!cpu_is_mx1() && !cpu_is_mx21() && mfn >= 0x200)
+ ll = -ll;
+
+ ll = (rate * mfi) + ll;
- return mxc_decode_pll(readl(pll->base), parent_rate);
+ return ll;
}
struct clk_ops clk_pllv1_ops = {
diff --git a/arch/arm/mach-imx/clk.c b/arch/arm/mach-imx/clk.c
new file mode 100644
index 00000000000..f5e8be8e7f1
--- /dev/null
+++ b/arch/arm/mach-imx/clk.c
@@ -0,0 +1,3 @@
+#include <linux/spinlock.h>
+
+DEFINE_SPINLOCK(imx_ccm_lock);
diff --git a/arch/arm/mach-imx/clk.h b/arch/arm/mach-imx/clk.h
index 1bf64fe2523..5f2d8acca25 100644
--- a/arch/arm/mach-imx/clk.h
+++ b/arch/arm/mach-imx/clk.h
@@ -3,7 +3,8 @@
#include <linux/spinlock.h>
#include <linux/clk-provider.h>
-#include <mach/clock.h>
+
+extern spinlock_t imx_ccm_lock;
struct clk *imx_clk_pllv1(const char *name, const char *parent,
void __iomem *base);
diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c
index 5d08533ab2c..8dc9d3edf17 100644
--- a/arch/arm/mach-imx/mach-kzm_arm11_01.c
+++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c
@@ -36,7 +36,6 @@
#include <asm/mach/map.h>
#include <asm/mach/time.h>
-#include <mach/clock.h>
#include <mach/common.h>
#include <mach/hardware.h>
#include <mach/iomux-mx3.h>
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
index 6ac72003115..149237e2485 100644
--- a/arch/arm/plat-mxc/Makefile
+++ b/arch/arm/plat-mxc/Makefile
@@ -3,7 +3,7 @@
#
# Common support
-obj-y := clock.o time.o devices.o cpu.o system.o irq-common.o
+obj-y := time.o devices.o cpu.o system.o irq-common.o
obj-$(CONFIG_MXC_TZIC) += tzic.o
obj-$(CONFIG_MXC_AVIC) += avic.o
diff --git a/arch/arm/plat-mxc/clock.c b/arch/arm/plat-mxc/clock.c
deleted file mode 100644
index 5079787273d..00000000000
--- a/arch/arm/plat-mxc/clock.c
+++ /dev/null
@@ -1,257 +0,0 @@
-/*
- * Based on arch/arm/plat-omap/clock.c
- *
- * Copyright (C) 2004 - 2005 Nokia corporation
- * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
- * Modified for omap shared clock framework by Tony Lindgren <tony@atomide.com>
- * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-/* #define DEBUG */
-
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/platform_device.h>
-#include <linux/proc_fs.h>
-#include <linux/semaphore.h>
-#include <linux/string.h>
-
-#include <mach/clock.h>
-#include <mach/hardware.h>
-
-#ifndef CONFIG_COMMON_CLK
-static LIST_HEAD(clocks);
-static DEFINE_MUTEX(clocks_mutex);
-
-/*-------------------------------------------------------------------------
- * Standard clock functions defined in include/linux/clk.h
- *-------------------------------------------------------------------------*/
-
-static void __clk_disable(struct clk *clk)
-{
- if (clk == NULL || IS_ERR(clk))
- return;
- WARN_ON(!clk->usecount);
-
- if (!(--clk->usecount)) {
- if (clk->disable)
- clk->disable(clk);
- __clk_disable(clk->parent);
- __clk_disable(clk->secondary);
- }
-}
-
-static int __clk_enable(struct clk *clk)
-{
- if (clk == NULL || IS_ERR(clk))
- return -EINVAL;
-
- if (clk->usecount++ == 0) {
- __clk_enable(clk->parent);
- __clk_enable(clk->secondary);
-
- if (clk->enable)
- clk->enable(clk);
- }
- return 0;
-}
-
-/* This function increments the reference count on the clock and enables the
- * clock if not already enabled. The parent clock tree is recursively enabled
- */
-int clk_enable(struct clk *clk)
-{
- int ret = 0;
-
- if (clk == NULL || IS_ERR(clk))
- return -EINVAL;
-
- mutex_lock(&clocks_mutex);
- ret = __clk_enable(clk);
- mutex_unlock(&clocks_mutex);
-
- return ret;
-}
-EXPORT_SYMBOL(clk_enable);
-
-/* This function decrements the reference count on the clock and disables
- * the clock when reference count is 0. The parent clock tree is
- * recursively disabled
- */
-void clk_disable(struct clk *clk)
-{
- if (clk == NULL || IS_ERR(clk))
- return;
-
- mutex_lock(&clocks_mutex);
- __clk_disable(clk);
- mutex_unlock(&clocks_mutex);
-}
-EXPORT_SYMBOL(clk_disable);
-
-/* Retrieve the *current* clock rate. If the clock itself
- * does not provide a special calculation routine, ask
- * its parent and so on, until one is able to return
- * a valid clock rate
- */
-unsigned long clk_get_rate(struct clk *clk)
-{
- if (clk == NULL || IS_ERR(clk))
- return 0UL;
-
- if (clk->get_rate)
- return clk->get_rate(clk);
-
- return clk_get_rate(clk->parent);
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-/* Round the requested clock rate to the nearest supported
- * rate that is less than or equal to the requested rate.
- * This is dependent on the clock's current parent.
- */
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
- if (clk == NULL || IS_ERR(clk) || !clk->round_rate)
- return 0;
-
- return clk->round_rate(clk, rate);
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-/* Set the clock to the requested clock rate. The rate must
- * match a supported rate exactly based on what clk_round_rate returns
- */
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
- int ret = -EINVAL;
-
- if (clk == NULL || IS_ERR(clk) || clk->set_rate == NULL || rate == 0)
- return ret;
-
- mutex_lock(&clocks_mutex);
- ret = clk->set_rate(clk, rate);
- mutex_unlock(&clocks_mutex);
-
- return ret;
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-/* Set the clock's parent to another clock source */
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
- int ret = -EINVAL;
- struct clk *old;
-
- if (clk == NULL || IS_ERR(clk) || parent == NULL ||
- IS_ERR(parent) || clk->set_parent == NULL)
- return ret;
-
- if (clk->usecount)
- clk_enable(parent);
-
- mutex_lock(&clocks_mutex);
- ret = clk->set_parent(clk, parent);
- if (ret == 0) {
- old = clk->parent;
- clk->parent = parent;
- } else {
- old = parent;
- }
- mutex_unlock(&clocks_mutex);
-
- if (clk->usecount)
- clk_disable(old);
-
- return ret;
-}
-EXPORT_SYMBOL(clk_set_parent);
-
-/* Retrieve the clock's parent clock source */
-struct clk *clk_get_parent(struct clk *clk)
-{
- struct clk *ret = NULL;
-
- if (clk == NULL || IS_ERR(clk))
- return ret;
-
- return clk->parent;
-}
-EXPORT_SYMBOL(clk_get_parent);
-
-#else
-
-/*
- * Lock to protect the clock module (ccm) registers. Used
- * on all i.MXs
- */
-DEFINE_SPINLOCK(imx_ccm_lock);
-
-#endif /* CONFIG_COMMON_CLK */
-
-/*
- * Get the resulting clock rate from a PLL register value and the input
- * frequency. PLLs with this register layout can at least be found on
- * MX1, MX21, MX27 and MX31
- *
- * mfi + mfn / (mfd + 1)
- * f = 2 * f_ref * --------------------
- * pd + 1
- */
-unsigned long mxc_decode_pll(unsigned int reg_val, u32 freq)
-{
- long long ll;
- int mfn_abs;
- unsigned int mfi, mfn, mfd, pd;
-
- mfi = (reg_val >> 10) & 0xf;
- mfn = reg_val & 0x3ff;
- mfd = (reg_val >> 16) & 0x3ff;
- pd = (reg_val >> 26) & 0xf;
-
- mfi = mfi <= 5 ? 5 : mfi;
-
- mfn_abs = mfn;
-
- /* On all i.MXs except i.MX1 and i.MX21 mfn is a 10bit
- * 2's complements number
- */
- if (!cpu_is_mx1() && !cpu_is_mx21() && mfn >= 0x200)
- mfn_abs = 0x400 - mfn;
-
- freq *= 2;
- freq /= pd + 1;
-
- ll = (unsigned long long)freq * mfn_abs;
-
- do_div(ll, mfd + 1);
-
- if (!cpu_is_mx1() && !cpu_is_mx21() && mfn >= 0x200)
- ll = -ll;
-
- ll = (freq * mfi) + ll;
-
- return ll;
-}
diff --git a/arch/arm/plat-mxc/cpufreq.c b/arch/arm/plat-mxc/cpufreq.c
index 73db34bf588..b5b6f808313 100644
--- a/arch/arm/plat-mxc/cpufreq.c
+++ b/arch/arm/plat-mxc/cpufreq.c
@@ -23,7 +23,6 @@
#include <linux/err.h>
#include <linux/slab.h>
#include <mach/hardware.h>
-#include <mach/clock.h>
#define CLK32_FREQ 32768
#define NANOSECOND (1000 * 1000 * 1000)
diff --git a/arch/arm/plat-mxc/devices/platform-imx-uart.c b/arch/arm/plat-mxc/devices/platform-imx-uart.c
index 2020d84956c..d390f00bd29 100644
--- a/arch/arm/plat-mxc/devices/platform-imx-uart.c
+++ b/arch/arm/plat-mxc/devices/platform-imx-uart.c
@@ -87,7 +87,7 @@ const struct imx_imx_uart_1irq_data imx31_imx_uart_data[] __initconst = {
#ifdef CONFIG_SOC_IMX35
const struct imx_imx_uart_1irq_data imx35_imx_uart_data[] __initconst = {
#define imx35_imx_uart_data_entry(_id, _hwid) \
- imx_imx_uart_1irq_data_entry(MX31, _id, _hwid, SZ_16K)
+ imx_imx_uart_1irq_data_entry(MX35, _id, _hwid, SZ_16K)
imx35_imx_uart_data_entry(0, 1),
imx35_imx_uart_data_entry(1, 2),
imx35_imx_uart_data_entry(2, 3),
diff --git a/arch/arm/plat-mxc/include/mach/clock.h b/arch/arm/plat-mxc/include/mach/clock.h
deleted file mode 100644
index bd940c795cb..00000000000
--- a/arch/arm/plat-mxc/include/mach/clock.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_MXC_CLOCK_H__
-#define __ASM_ARCH_MXC_CLOCK_H__
-
-#ifndef __ASSEMBLY__
-#include <linux/list.h>
-
-#ifndef CONFIG_COMMON_CLK
-struct module;
-
-struct clk {
- int id;
- /* Source clock this clk depends on */
- struct clk *parent;
- /* Secondary clock to enable/disable with this clock */
- struct clk *secondary;
- /* Reference count of clock enable/disable */
- __s8 usecount;
- /* Register bit position for clock's enable/disable control. */
- u8 enable_shift;
- /* Register address for clock's enable/disable control. */
- void __iomem *enable_reg;
- u32 flags;
- /* get the current clock rate (always a fresh value) */
- unsigned long (*get_rate) (struct clk *);
- /* Function ptr to set the clock to a new rate. The rate must match a
- supported rate returned from round_rate. Leave blank if clock is not
- programmable */
- int (*set_rate) (struct clk *, unsigned long);
- /* Function ptr to round the requested clock rate to the nearest
- supported rate that is less than or equal to the requested rate. */
- unsigned long (*round_rate) (struct clk *, unsigned long);
- /* Function ptr to enable the clock. Leave blank if clock can not
- be gated. */
- int (*enable) (struct clk *);
- /* Function ptr to disable the clock. Leave blank if clock can not
- be gated. */
- void (*disable) (struct clk *);
- /* Function ptr to set the parent clock of the clock. */
- int (*set_parent) (struct clk *, struct clk *);
-};
-
-int clk_register(struct clk *clk);
-void clk_unregister(struct clk *clk);
-#endif /* CONFIG_COMMON_CLK */
-
-extern spinlock_t imx_ccm_lock;
-
-unsigned long mxc_decode_pll(unsigned int pll, u32 f_ref);
-
-#endif /* __ASSEMBLY__ */
-#endif /* __ASM_ARCH_MXC_CLOCK_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx2_cam.h b/arch/arm/plat-mxc/include/mach/mx2_cam.h
index 3c080a32dbf..7ded6f1f74b 100644
--- a/arch/arm/plat-mxc/include/mach/mx2_cam.h
+++ b/arch/arm/plat-mxc/include/mach/mx2_cam.h
@@ -23,7 +23,6 @@
#ifndef __MACH_MX2_CAM_H_
#define __MACH_MX2_CAM_H_
-#define MX2_CAMERA_SWAP16 (1 << 0)
#define MX2_CAMERA_EXT_VSYNC (1 << 1)
#define MX2_CAMERA_CCIR (1 << 2)
#define MX2_CAMERA_CCIR_INTERLACE (1 << 3)
@@ -31,7 +30,6 @@
#define MX2_CAMERA_GATED_CLOCK (1 << 5)
#define MX2_CAMERA_INV_DATA (1 << 6)
#define MX2_CAMERA_PCLK_SAMPLE_RISING (1 << 7)
-#define MX2_CAMERA_PACK_DIR_MSB (1 << 8)
/**
* struct mx2_camera_platform_data - optional platform data for mx2_camera
diff --git a/arch/arm/plat-mxc/system.c b/arch/arm/plat-mxc/system.c
index 1996c3e3b8f..3da78cfc5a9 100644
--- a/arch/arm/plat-mxc/system.c
+++ b/arch/arm/plat-mxc/system.c
@@ -21,7 +21,6 @@
#include <linux/io.h>
#include <linux/err.h>
#include <linux/delay.h>
-#include <linux/module.h>
#include <mach/hardware.h>
#include <mach/common.h>
@@ -29,9 +28,6 @@
#include <asm/proc-fns.h>
#include <asm/mach-types.h>
-void __iomem *(*imx_ioremap)(unsigned long, size_t, unsigned int) = NULL;
-EXPORT_SYMBOL_GPL(imx_ioremap);
-
static void __iomem *wdog_base;
/*
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-26 23:57:33 +0000