diff options
Diffstat (limited to 'arch')
24 files changed, 163 insertions, 118 deletions
diff --git a/arch/arm/boot/dts/msm8960-cdp.dts b/arch/arm/boot/dts/msm8960-cdp.dts index db2060c4654..9c1167b0459 100644 --- a/arch/arm/boot/dts/msm8960-cdp.dts +++ b/arch/arm/boot/dts/msm8960-cdp.dts @@ -26,7 +26,7 @@ cpu-offset = <0x80000>; }; - msmgpio: gpio@fd510000 { + msmgpio: gpio@800000 { compatible = "qcom,msm-gpio"; gpio-controller; #gpio-cells = <2>; @@ -34,7 +34,7 @@ interrupts = <0 32 0x4>; interrupt-controller; #interrupt-cells = <2>; - reg = <0xfd510000 0x4000>; + reg = <0x800000 0x4000>; }; serial@16440000 { diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts index 08b72678abf..65d7b601651 100644 --- a/arch/arm/boot/dts/omap5-uevm.dts +++ b/arch/arm/boot/dts/omap5-uevm.dts @@ -235,7 +235,7 @@ }; &mmc1 { - vmmc-supply = <&vmmcsd_fixed>; + vmmc-supply = <&ldo9_reg>; bus-width = <4>; }; @@ -282,6 +282,7 @@ regulators { smps123_reg: smps123 { + /* VDD_OPP_MPU */ regulator-name = "smps123"; regulator-min-microvolt = < 600000>; regulator-max-microvolt = <1500000>; @@ -290,6 +291,7 @@ }; smps45_reg: smps45 { + /* VDD_OPP_MM */ regulator-name = "smps45"; regulator-min-microvolt = < 600000>; regulator-max-microvolt = <1310000>; @@ -298,6 +300,7 @@ }; smps6_reg: smps6 { + /* VDD_DDR3 - over VDD_SMPS6 */ regulator-name = "smps6"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; @@ -306,6 +309,7 @@ }; smps7_reg: smps7 { + /* VDDS_1v8_OMAP over VDDS_1v8_MAIN */ regulator-name = "smps7"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -314,6 +318,7 @@ }; smps8_reg: smps8 { + /* VDD_OPP_CORE */ regulator-name = "smps8"; regulator-min-microvolt = < 600000>; regulator-max-microvolt = <1310000>; @@ -322,15 +327,15 @@ }; smps9_reg: smps9 { + /* VDDA_2v1_AUD over VDD_2v1 */ regulator-name = "smps9"; regulator-min-microvolt = <2100000>; regulator-max-microvolt = <2100000>; - regulator-always-on; - regulator-boot-on; ti,smps-range = <0x80>; }; smps10_reg: smps10 { + /* VBUS_5V_OTG */ regulator-name = "smps10"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; @@ -339,38 +344,40 @@ }; ldo1_reg: ldo1 { + /* VDDAPHY_CAM: vdda_csiport */ regulator-name = "ldo1"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1800000>; }; ldo2_reg: ldo2 { + /* VCC_2V8_DISP: Does not go anywhere */ regulator-name = "ldo2"; - regulator-min-microvolt = <2900000>; - regulator-max-microvolt = <2900000>; - regulator-always-on; - regulator-boot-on; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + /* Unused */ + status = "disabled"; }; ldo3_reg: ldo3 { + /* VDDAPHY_MDM: vdda_lli */ regulator-name = "ldo3"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; regulator-boot-on; + /* Only if Modem is used */ + status = "disabled"; }; ldo4_reg: ldo4 { + /* VDDAPHY_DISP: vdda_dsiport/hdmi */ regulator-name = "ldo4"; - regulator-min-microvolt = <2200000>; - regulator-max-microvolt = <2200000>; - regulator-always-on; - regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1800000>; }; ldo5_reg: ldo5 { + /* VDDA_1V8_PHY: usb/sata/hdmi.. */ regulator-name = "ldo5"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -379,38 +386,43 @@ }; ldo6_reg: ldo6 { + /* VDDS_1V2_WKUP: hsic/ldo_emu_wkup */ regulator-name = "ldo6"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; regulator-always-on; regulator-boot-on; }; ldo7_reg: ldo7 { + /* VDD_VPP: vpp1 */ regulator-name = "ldo7"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + /* Only for efuse reprograming! */ + status = "disabled"; }; ldo8_reg: ldo8 { + /* VDD_3v0: Does not go anywhere */ regulator-name = "ldo8"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; regulator-boot-on; + /* Unused */ + status = "disabled"; }; ldo9_reg: ldo9 { + /* VCC_DV_SDIO: vdds_sdcard */ regulator-name = "ldo9"; regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; + regulator-max-microvolt = <3000000>; regulator-boot-on; }; ldoln_reg: ldoln { + /* VDDA_1v8_REF: vdds_osc/mm_l4per.. */ regulator-name = "ldoln"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -419,12 +431,20 @@ }; ldousb_reg: ldousb { + /* VDDA_3V_USB: VDDA_USBHS33 */ regulator-name = "ldousb"; regulator-min-microvolt = <3250000>; regulator-max-microvolt = <3250000>; regulator-always-on; regulator-boot-on; }; + + regen3_reg: regen3 { + /* REGEN3 controls LDO9 supply to card */ + regulator-name = "regen3"; + regulator-always-on; + regulator-boot-on; + }; }; }; }; diff --git a/arch/arm/boot/dts/stih41x.dtsi b/arch/arm/boot/dts/stih41x.dtsi index 7321403cab8..f5b9898d9c6 100644 --- a/arch/arm/boot/dts/stih41x.dtsi +++ b/arch/arm/boot/dts/stih41x.dtsi @@ -6,10 +6,12 @@ #address-cells = <1>; #size-cells = <0>; cpu@0 { + device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; }; cpu@1 { + device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <1>; }; diff --git a/arch/arm/boot/dts/tegra20-colibri-512.dtsi b/arch/arm/boot/dts/tegra20-colibri-512.dtsi index 2fcb3f2ca16..5592be6f2f7 100644 --- a/arch/arm/boot/dts/tegra20-colibri-512.dtsi +++ b/arch/arm/boot/dts/tegra20-colibri-512.dtsi @@ -457,6 +457,7 @@ }; usb-phy@c5004000 { + status = "okay"; nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig index 614e41e7881..905efc8cac7 100644 --- a/arch/arm/mach-msm/Kconfig +++ b/arch/arm/mach-msm/Kconfig @@ -121,8 +121,7 @@ config MSM_SMD bool config MSM_GPIOMUX - depends on !(ARCH_MSM8X60 || ARCH_MSM8960) - bool "MSM V1 TLMM GPIOMUX architecture" + bool help Support for MSM V1 TLMM GPIOMUX architecture. diff --git a/arch/arm/mach-msm/gpiomux-v1.c b/arch/arm/mach-msm/gpiomux-v1.c deleted file mode 100644 index 27de2abd714..00000000000 --- a/arch/arm/mach-msm/gpiomux-v1.c +++ /dev/null @@ -1,33 +0,0 @@ -/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - */ -#include <linux/kernel.h> -#include "gpiomux.h" -#include "proc_comm.h" - -void __msm_gpiomux_write(unsigned gpio, gpiomux_config_t val) -{ - unsigned tlmm_config = (val & ~GPIOMUX_CTL_MASK) | - ((gpio & 0x3ff) << 4); - unsigned tlmm_disable = 0; - int rc; - - rc = msm_proc_comm(PCOM_RPC_GPIO_TLMM_CONFIG_EX, - &tlmm_config, &tlmm_disable); - if (rc) - pr_err("%s: unexpected proc_comm failure %d: %08x %08x\n", - __func__, rc, tlmm_config, tlmm_disable); -} diff --git a/arch/arm/mach-msm/gpiomux.h b/arch/arm/mach-msm/gpiomux.h index 8e82f41a892..4410d7766f9 100644 --- a/arch/arm/mach-msm/gpiomux.h +++ b/arch/arm/mach-msm/gpiomux.h @@ -73,16 +73,6 @@ extern struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS]; int msm_gpiomux_write(unsigned gpio, gpiomux_config_t active, gpiomux_config_t suspended); - -/* Architecture-internal function for use by the framework only. - * This function can assume the following: - * - the gpio value has passed a bounds-check - * - the gpiomux spinlock has been obtained - * - * This function is not for public consumption. External users - * should use msm_gpiomux_write. - */ -void __msm_gpiomux_write(unsigned gpio, gpiomux_config_t val); #else static inline int msm_gpiomux_write(unsigned gpio, gpiomux_config_t active, diff --git a/arch/arm/mach-omap2/dss-common.c b/arch/arm/mach-omap2/dss-common.c index 393aeefaebb..043e5705f2a 100644 --- a/arch/arm/mach-omap2/dss-common.c +++ b/arch/arm/mach-omap2/dss-common.c @@ -42,7 +42,7 @@ /* Using generic display panel */ static struct tfp410_platform_data omap4_dvi_panel = { - .i2c_bus_num = 3, + .i2c_bus_num = 2, .power_down_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO, }; diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c index 5cc92874be7..f99f68e1e85 100644 --- a/arch/arm/mach-omap2/omap_device.c +++ b/arch/arm/mach-omap2/omap_device.c @@ -129,6 +129,7 @@ static int omap_device_build_from_dt(struct platform_device *pdev) struct device_node *node = pdev->dev.of_node; const char *oh_name; int oh_cnt, i, ret = 0; + bool device_active = false; oh_cnt = of_property_count_strings(node, "ti,hwmods"); if (oh_cnt <= 0) { @@ -152,6 +153,8 @@ static int omap_device_build_from_dt(struct platform_device *pdev) goto odbfd_exit1; } hwmods[i] = oh; + if (oh->flags & HWMOD_INIT_NO_IDLE) + device_active = true; } od = omap_device_alloc(pdev, hwmods, oh_cnt); @@ -172,6 +175,11 @@ static int omap_device_build_from_dt(struct platform_device *pdev) pdev->dev.pm_domain = &omap_device_pm_domain; + if (device_active) { + omap_device_enable(pdev); + pm_runtime_set_active(&pdev->dev); + } + odbfd_exit1: kfree(hwmods); odbfd_exit: @@ -842,6 +850,7 @@ static int __init omap_device_late_idle(struct device *dev, void *data) { struct platform_device *pdev = to_platform_device(dev); struct omap_device *od = to_omap_device(pdev); + int i; if (!od) return 0; @@ -850,6 +859,15 @@ static int __init omap_device_late_idle(struct device *dev, void *data) * If omap_device state is enabled, but has no driver bound, * idle it. */ + + /* + * Some devices (like memory controllers) are always kept + * enabled, and should not be idled even with no drivers. + */ + for (i = 0; i < od->hwmods_cnt; i++) + if (od->hwmods[i]->flags & HWMOD_INIT_NO_IDLE) + return 0; + if (od->_driver_status != BUS_NOTIFY_BOUND_DRIVER) { if (od->_state == OMAP_DEVICE_STATE_ENABLED) { dev_warn(dev, "%s: enabled but no driver. Idling\n", diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 7341eff63f5..7f4db12b145 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -2386,7 +2386,7 @@ static void __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data) np = of_dev_hwmod_lookup(of_find_node_by_name(NULL, "ocp"), oh); if (np) - va_start = of_iomap(np, 0); + va_start = of_iomap(np, oh->mpu_rt_idx); } else { va_start = ioremap(mem->pa_start, mem->pa_end - mem->pa_start); } diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index aab33fd814c..e1482a9b3bc 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -95,6 +95,54 @@ extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type3; #define MODULEMODE_HWCTRL 1 #define MODULEMODE_SWCTRL 2 +#define DEBUG_OMAP2UART1_FLAGS 0 +#define DEBUG_OMAP2UART2_FLAGS 0 +#define DEBUG_OMAP2UART3_FLAGS 0 +#define DEBUG_OMAP3UART3_FLAGS 0 +#define DEBUG_OMAP3UART4_FLAGS 0 +#define DEBUG_OMAP4UART3_FLAGS 0 +#define DEBUG_OMAP4UART4_FLAGS 0 +#define DEBUG_TI81XXUART1_FLAGS 0 +#define DEBUG_TI81XXUART2_FLAGS 0 +#define DEBUG_TI81XXUART3_FLAGS 0 +#define DEBUG_AM33XXUART1_FLAGS 0 + +#define DEBUG_OMAPUART_FLAGS (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET) + +#if defined(CONFIG_DEBUG_OMAP2UART1) +#undef DEBUG_OMAP2UART1_FLAGS +#define DEBUG_OMAP2UART1_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_OMAP2UART2) +#undef DEBUG_OMAP2UART2_FLAGS +#define DEBUG_OMAP2UART2_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_OMAP2UART3) +#undef DEBUG_OMAP2UART3_FLAGS +#define DEBUG_OMAP2UART3_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_OMAP3UART3) +#undef DEBUG_OMAP3UART3_FLAGS +#define DEBUG_OMAP3UART3_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_OMAP3UART4) +#undef DEBUG_OMAP3UART4_FLAGS +#define DEBUG_OMAP3UART4_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_OMAP4UART3) +#undef DEBUG_OMAP4UART3_FLAGS +#define DEBUG_OMAP4UART3_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_OMAP4UART4) +#undef DEBUG_OMAP4UART4_FLAGS +#define DEBUG_OMAP4UART4_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_TI81XXUART1) +#undef DEBUG_TI81XXUART1_FLAGS +#define DEBUG_TI81XXUART1_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_TI81XXUART2) +#undef DEBUG_TI81XXUART2_FLAGS +#define DEBUG_TI81XXUART2_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_TI81XXUART3) +#undef DEBUG_TI81XXUART3_FLAGS +#define DEBUG_TI81XXUART3_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_AM33XXUART1) +#undef DEBUG_AM33XXUART1_FLAGS +#define DEBUG_AM33XXUART1_FLAGS DEBUG_OMAPUART_FLAGS +#endif /** * struct omap_hwmod_mux_info - hwmod specific mux configuration @@ -568,6 +616,7 @@ struct omap_hwmod_link { * @voltdm: pointer to voltage domain (filled in at runtime) * @dev_attr: arbitrary device attributes that can be passed to the driver * @_sysc_cache: internal-use hwmod flags + * @mpu_rt_idx: index of device address space for register target (for DT boot) * @_mpu_rt_va: cached register target start address (internal use) * @_mpu_port: cached MPU register target slave (internal use) * @opt_clks_cnt: number of @opt_clks @@ -617,6 +666,7 @@ struct omap_hwmod { struct list_head node; struct omap_hwmod_ocp_if *_mpu_port; u16 flags; + u8 mpu_rt_idx; u8 response_lat; u8 rst_lines_cnt; u8 opt_clks_cnt; diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c index d05fc7b5456..56cebb05509 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c @@ -512,7 +512,7 @@ struct omap_hwmod omap2xxx_uart1_hwmod = { .mpu_irqs = omap2_uart1_mpu_irqs, .sdma_reqs = omap2_uart1_sdma_reqs, .main_clk = "uart1_fck", - .flags = HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_OMAP2UART1_FLAGS | HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, @@ -532,7 +532,7 @@ struct omap_hwmod omap2xxx_uart2_hwmod = { .mpu_irqs = omap2_uart2_mpu_irqs, .sdma_reqs = omap2_uart2_sdma_reqs, .main_clk = "uart2_fck", - .flags = HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_OMAP2UART2_FLAGS | HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, @@ -552,7 +552,7 @@ struct omap_hwmod omap2xxx_uart3_hwmod = { .mpu_irqs = omap2_uart3_mpu_irqs, .sdma_reqs = omap2_uart3_sdma_reqs, .main_clk = "uart3_fck", - .flags = HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_OMAP2UART3_FLAGS | HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c index 28bbd56346a..eb2f3b93b51 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c @@ -562,6 +562,7 @@ static struct omap_hwmod am33xx_cpgmac0_hwmod = { .clkdm_name = "cpsw_125mhz_clkdm", .flags = (HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY), .main_clk = "cpsw_125mhz_gclk", + .mpu_rt_idx = 1, .prcm = { .omap4 = { .clkctrl_offs = AM33XX_CM_PER_CPGMAC0_CLKCTRL_OFFSET, @@ -1512,7 +1513,7 @@ static struct omap_hwmod am33xx_uart1_hwmod = { .name = "uart1", .class = &uart_class, .clkdm_name = "l4_wkup_clkdm", - .flags = HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_AM33XXUART1_FLAGS | HWMOD_SWSUP_SIDLE_ACT, .main_clk = "dpll_per_m2_div4_wkupdm_ck", .prcm = { .omap4 = { diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index f7a3df2fb57..0c3a427da54 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -490,7 +490,7 @@ static struct omap_hwmod omap3xxx_uart1_hwmod = { .mpu_irqs = omap2_uart1_mpu_irqs, .sdma_reqs = omap2_uart1_sdma_reqs, .main_clk = "uart1_fck", - .flags = HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_TI81XXUART1_FLAGS | HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, @@ -509,7 +509,7 @@ static struct omap_hwmod omap3xxx_uart2_hwmod = { .mpu_irqs = omap2_uart2_mpu_irqs, .sdma_reqs = omap2_uart2_sdma_reqs, .main_clk = "uart2_fck", - .flags = HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_TI81XXUART2_FLAGS | HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, @@ -528,7 +528,8 @@ static struct omap_hwmod omap3xxx_uart3_hwmod = { .mpu_irqs = omap2_uart3_mpu_irqs, .sdma_reqs = omap2_uart3_sdma_reqs, .main_clk = "uart3_fck", - .flags = HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_OMAP3UART3_FLAGS | DEBUG_TI81XXUART3_FLAGS | + HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = OMAP3430_PER_MOD, @@ -558,7 +559,7 @@ static struct omap_hwmod omap36xx_uart4_hwmod = { .mpu_irqs = uart4_mpu_irqs, .sdma_reqs = uart4_sdma_reqs, .main_clk = "uart4_fck", - .flags = HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_OMAP3UART4_FLAGS | HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = OMAP3430_PER_MOD, diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index d04b5e60fdb..9c3b504477d 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -2858,8 +2858,7 @@ static struct omap_hwmod omap44xx_uart3_hwmod = { .name = "uart3", .class = &omap44xx_uart_hwmod_class, .clkdm_name = "l4_per_clkdm", - .flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET | - HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_OMAP4UART3_FLAGS | HWMOD_SWSUP_SIDLE_ACT, .main_clk = "func_48m_fclk", .prcm = { .omap4 = { @@ -2875,7 +2874,7 @@ static struct omap_hwmod omap44xx_uart4_hwmod = { .name = "uart4", .class = &omap44xx_uart_hwmod_class, .clkdm_name = "l4_per_clkdm", - .flags = HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_OMAP4UART4_FLAGS | HWMOD_SWSUP_SIDLE_ACT, .main_clk = "func_48m_fclk", .prcm = { .omap4 = { diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c index f37ae96b70a..3c70f5c1860 100644 --- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c @@ -1375,7 +1375,7 @@ static struct omap_hwmod omap54xx_uart3_hwmod = { .name = "uart3", .class = &omap54xx_uart_hwmod_class, .clkdm_name = "l4per_clkdm", - .flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET, + .flags = DEBUG_OMAP4UART3_FLAGS, .main_clk = "func_48m_fclk", .prcm = { .omap4 = { @@ -1391,6 +1391,7 @@ static struct omap_hwmod omap54xx_uart4_hwmod = { .name = "uart4", .class = &omap54xx_uart_hwmod_class, .clkdm_name = "l4per_clkdm", + .flags = DEBUG_OMAP4UART4_FLAGS, .main_clk = "func_48m_fclk", .prcm = { .omap4 = { diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 3a674de6cb6..a388f8c1bcb 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -208,17 +208,6 @@ static int __init omap_serial_early_init(void) pr_info("%s used as console in debug mode: uart%d clocks will not be gated", uart_name, uart->num); } - - /* - * omap-uart can be used for earlyprintk logs - * So if omap-uart is used as console then prevent - * uart reset and idle to get logs from omap-uart - * until uart console driver is available to take - * care for console messages. - * Idling or resetting omap-uart while printing logs - * early boot logs can stall the boot-up. - */ - oh->flags |= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET; } } while (1); diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index e115f674210..c5be60d85e4 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -1162,9 +1162,6 @@ static void __init eva_init(void) gpio_request_one(61, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */ gpio_request_one(202, GPIOF_OUT_INIT_LOW, NULL); /* LCD0_LED_CONT */ - /* Touchscreen */ - gpio_request_one(166, GPIOF_OUT_INIT_HIGH, NULL); /* TP_RST_B */ - /* GETHER */ gpio_request_one(18, GPIOF_OUT_INIT_HIGH, NULL); /* PHY_RST */ diff --git a/arch/arm/mach-shmobile/board-bockw.c b/arch/arm/mach-shmobile/board-bockw.c index d5554646916..3354a85c90f 100644 --- a/arch/arm/mach-shmobile/board-bockw.c +++ b/arch/arm/mach-shmobile/board-bockw.c @@ -167,7 +167,13 @@ static const struct pinctrl_map bockw_pinctrl_map[] = { "usb1", "usb1"), /* SDHI0 */ PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778", - "sdhi0", "sdhi0"), + "sdhi0_data4", "sdhi0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778", + "sdhi0_ctrl", "sdhi0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778", + "sdhi0_cd", "sdhi0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778", + "sdhi0_wp", "sdhi0"), }; #define FPGA 0x18200000 diff --git a/arch/arm/mach-shmobile/board-lager.c b/arch/arm/mach-shmobile/board-lager.c index d73e21d3ea8..8d6bd5c5efb 100644 --- a/arch/arm/mach-shmobile/board-lager.c +++ b/arch/arm/mach-shmobile/board-lager.c @@ -59,7 +59,7 @@ static __initdata struct gpio_led_platform_data lager_leds_pdata = { #define GPIO_KEY(c, g, d, ...) \ { .code = c, .gpio = g, .desc = d, .active_low = 1 } -static __initdata struct gpio_keys_button gpio_buttons[] = { +static struct gpio_keys_button gpio_buttons[] = { GPIO_KEY(KEY_4, RCAR_GP_PIN(1, 28), "SW2-pin4"), GPIO_KEY(KEY_3, RCAR_GP_PIN(1, 26), "SW2-pin3"), GPIO_KEY(KEY_2, RCAR_GP_PIN(1, 24), "SW2-pin2"), diff --git a/arch/arm/mach-sti/headsmp.S b/arch/arm/mach-sti/headsmp.S index 78ebc7559f5..4c09bae86ed 100644 --- a/arch/arm/mach-sti/headsmp.S +++ b/arch/arm/mach-sti/headsmp.S @@ -16,8 +16,6 @@ #include <linux/linkage.h> #include <linux/init.h> - __INIT - /* * ST specific entry point for secondary CPUs. This provides * a "holding pen" into which all secondary cores are held until we're diff --git a/arch/avr32/boards/atngw100/mrmt.c b/arch/avr32/boards/atngw100/mrmt.c index f9143196345..7de083d19b7 100644 --- a/arch/avr32/boards/atngw100/mrmt.c +++ b/arch/avr32/boards/atngw100/mrmt.c @@ -150,7 +150,6 @@ static struct ac97c_platform_data __initdata ac97c0_data = { static struct platform_device rmt_ts_device = { .name = "ucb1400_ts", .id = -1, - } }; #endif diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c index ba694d2ba51..34c1c9a90be 100644 --- a/arch/s390/kvm/kvm-s390.c +++ b/arch/s390/kvm/kvm-s390.c @@ -702,14 +702,25 @@ static int __vcpu_run(struct kvm_vcpu *vcpu) return rc; vcpu->arch.sie_block->icptcode = 0; - preempt_disable(); - kvm_guest_enter(); - preempt_enable(); VCPU_EVENT(vcpu, 6, "entering sie flags %x", atomic_read(&vcpu->arch.sie_block->cpuflags)); trace_kvm_s390_sie_enter(vcpu, atomic_read(&vcpu->arch.sie_block->cpuflags)); + + /* + * As PF_VCPU will be used in fault handler, between guest_enter + * and guest_exit should be no uaccess. + */ + preempt_disable(); + kvm_guest_enter(); + preempt_enable(); rc = sie64a(vcpu->arch.sie_block, vcpu->run->s.regs.gprs); + kvm_guest_exit(); + + VCPU_EVENT(vcpu, 6, "exit sie icptcode %d", + vcpu->arch.sie_block->icptcode); + trace_kvm_s390_sie_exit(vcpu, vcpu->arch.sie_block->icptcode); + if (rc > 0) rc = 0; if (rc < 0) { @@ -721,10 +732,6 @@ static int __vcpu_run(struct kvm_vcpu *vcpu) rc = kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING); } } - VCPU_EVENT(vcpu, 6, "exit sie icptcode %d", - vcpu->arch.sie_block->icptcode); - trace_kvm_s390_sie_exit(vcpu, vcpu->arch.sie_block->icptcode); - kvm_guest_exit(); memcpy(&vcpu->run->s.regs.gprs[14], &vcpu->arch.sie_block->gg14, 16); return rc; diff --git a/arch/s390/kvm/priv.c b/arch/s390/kvm/priv.c index 0da3e6eb6be..4cdc54e63eb 100644 --- a/arch/s390/kvm/priv.c +++ b/arch/s390/kvm/priv.c @@ -16,6 +16,7 @@ #include <linux/errno.h> #include <linux/compat.h> #include <asm/asm-offsets.h> +#include <asm/facility.h> #include <asm/current.h> #include <asm/debug.h> #include <asm/ebcdic.h> @@ -532,8 +533,7 @@ static int handle_pfmf(struct kvm_vcpu *vcpu) return kvm_s390_inject_program_int(vcpu, PGM_SPECIFICATION); /* Only provide non-quiescing support if the host supports it */ - if (vcpu->run->s.regs.gprs[reg1] & PFMF_NQ && - S390_lowcore.stfl_fac_list & 0x00020000) + if (vcpu->run->s.regs.gprs[reg1] & PFMF_NQ && !test_facility(14)) return kvm_s390_inject_program_int(vcpu, PGM_SPECIFICATION); /* No support for conditional-SSKE */ |