1 files changed, 136 insertions, 117 deletions

diff --git a/block/blk-settings.c b/block/blk-settings.c
index 6ae118d6e19..31e7a9375c1 100644
--- a/block/blk-settings.c
+++ b/block/blk-settings.c
@@ -91,10 +91,9 @@ EXPORT_SYMBOL_GPL(blk_queue_lld_busy);
  */
 void blk_set_default_limits(struct queue_limits *lim)
 {
-	lim->max_phys_segments = MAX_PHYS_SEGMENTS;
-	lim->max_hw_segments = MAX_HW_SEGMENTS;
+	lim->max_segments = BLK_MAX_SEGMENTS;
 	lim->seg_boundary_mask = BLK_SEG_BOUNDARY_MASK;
-	lim->max_segment_size = MAX_SEGMENT_SIZE;
+	lim->max_segment_size = BLK_MAX_SEGMENT_SIZE;
 	lim->max_sectors = BLK_DEF_MAX_SECTORS;
 	lim->max_hw_sectors = INT_MAX;
 	lim->max_discard_sectors = 0;
@@ -154,7 +153,7 @@ void blk_queue_make_request(struct request_queue *q, make_request_fn *mfn)
 	q->unplug_timer.data = (unsigned long)q;
 
 	blk_set_default_limits(&q->limits);
-	blk_queue_max_sectors(q, SAFE_MAX_SECTORS);
+	blk_queue_max_hw_sectors(q, BLK_SAFE_MAX_SECTORS);
 
 	/*
 	 * If the caller didn't supply a lock, fall back to our embedded
@@ -210,37 +209,32 @@ void blk_queue_bounce_limit(struct request_queue *q, u64 dma_mask)
 EXPORT_SYMBOL(blk_queue_bounce_limit);
 
 /**
- * blk_queue_max_sectors - set max sectors for a request for this queue
+ * blk_queue_max_hw_sectors - set max sectors for a request for this queue
  * @q:  the request queue for the device
- * @max_sectors:  max sectors in the usual 512b unit
+ * @max_hw_sectors:  max hardware sectors in the usual 512b unit
  *
  * Description:
- *    Enables a low level driver to set an upper limit on the size of
- *    received requests.
+ *    Enables a low level driver to set a hard upper limit,
+ *    max_hw_sectors, on the size of requests.  max_hw_sectors is set by
+ *    the device driver based upon the combined capabilities of I/O
+ *    controller and storage device.
+ *
+ *    max_sectors is a soft limit imposed by the block layer for
+ *    filesystem type requests.  This value can be overridden on a
+ *    per-device basis in /sys/block/<device>/queue/max_sectors_kb.
+ *    The soft limit can not exceed max_hw_sectors.
  **/
-void blk_queue_max_sectors(struct request_queue *q, unsigned int max_sectors)
+void blk_queue_max_hw_sectors(struct request_queue *q, unsigned int max_hw_sectors)
 {
-	if ((max_sectors << 9) < PAGE_CACHE_SIZE) {
-		max_sectors = 1 << (PAGE_CACHE_SHIFT - 9);
+	if ((max_hw_sectors << 9) < PAGE_CACHE_SIZE) {
+		max_hw_sectors = 1 << (PAGE_CACHE_SHIFT - 9);
 		printk(KERN_INFO "%s: set to minimum %d\n",
-		       __func__, max_sectors);
+		       __func__, max_hw_sectors);
 	}
 
-	if (BLK_DEF_MAX_SECTORS > max_sectors)
-		q->limits.max_hw_sectors = q->limits.max_sectors = max_sectors;
-	else {
-		q->limits.max_sectors = BLK_DEF_MAX_SECTORS;
-		q->limits.max_hw_sectors = max_sectors;
-	}
-}
-EXPORT_SYMBOL(blk_queue_max_sectors);
-
-void blk_queue_max_hw_sectors(struct request_queue *q, unsigned int max_sectors)
-{
-	if (BLK_DEF_MAX_SECTORS > max_sectors)
-		q->limits.max_hw_sectors = BLK_DEF_MAX_SECTORS;
-	else
-		q->limits.max_hw_sectors = max_sectors;
+	q->limits.max_hw_sectors = max_hw_sectors;
+	q->limits.max_sectors = min_t(unsigned int, max_hw_sectors,
+				      BLK_DEF_MAX_SECTORS);
 }
 EXPORT_SYMBOL(blk_queue_max_hw_sectors);
 
@@ -257,41 +251,15 @@ void blk_queue_max_discard_sectors(struct request_queue *q,
 EXPORT_SYMBOL(blk_queue_max_discard_sectors);
 
 /**
- * blk_queue_max_phys_segments - set max phys segments for a request for this queue
- * @q:  the request queue for the device
- * @max_segments:  max number of segments
- *
- * Description:
- *    Enables a low level driver to set an upper limit on the number of
- *    physical data segments in a request.  This would be the largest sized
- *    scatter list the driver could handle.
- **/
-void blk_queue_max_phys_segments(struct request_queue *q,
-				 unsigned short max_segments)
-{
-	if (!max_segments) {
-		max_segments = 1;
-		printk(KERN_INFO "%s: set to minimum %d\n",
-		       __func__, max_segments);
-	}
-
-	q->limits.max_phys_segments = max_segments;
-}
-EXPORT_SYMBOL(blk_queue_max_phys_segments);
-
-/**
- * blk_queue_max_hw_segments - set max hw segments for a request for this queue
+ * blk_queue_max_segments - set max hw segments for a request for this queue
  * @q:  the request queue for the device
  * @max_segments:  max number of segments
  *
  * Description:
  *    Enables a low level driver to set an upper limit on the number of
- *    hw data segments in a request.  This would be the largest number of
- *    address/length pairs the host adapter can actually give at once
- *    to the device.
+ *    hw data segments in a request.
  **/
-void blk_queue_max_hw_segments(struct request_queue *q,
-			       unsigned short max_segments)
+void blk_queue_max_segments(struct request_queue *q, unsigned short max_segments)
 {
 	if (!max_segments) {
 		max_segments = 1;
@@ -299,9 +267,9 @@ void blk_queue_max_hw_segments(struct request_queue *q,
 		       __func__, max_segments);
 	}
 
-	q->limits.max_hw_segments = max_segments;
+	q->limits.max_segments = max_segments;
 }
-EXPORT_SYMBOL(blk_queue_max_hw_segments);
+EXPORT_SYMBOL(blk_queue_max_segments);
 
 /**
  * blk_queue_max_segment_size - set max segment size for blk_rq_map_sg
@@ -505,21 +473,29 @@ static unsigned int lcm(unsigned int a, unsigned int b)
 
 /**
  * blk_stack_limits - adjust queue_limits for stacked devices
- * @t:	the stacking driver limits (top)
- * @b:  the underlying queue limits (bottom)
- * @offset:  offset to beginning of data within component device
+ * @t:	the stacking driver limits (top device)
+ * @b:  the underlying queue limits (bottom, component device)
+ * @start:  first data sector within component device
  *
  * Description:
- *    Merges two queue_limit structs.  Returns 0 if alignment didn't
- *    change.  Returns -1 if adding the bottom device caused
- *    misalignment.
+ *    This function is used by stacking drivers like MD and DM to ensure
+ *    that all component devices have compatible block sizes and
+ *    alignments.  The stacking driver must provide a queue_limits
+ *    struct (top) and then iteratively call the stacking function for
+ *    all component (bottom) devices.  The stacking function will
+ *    attempt to combine the values and ensure proper alignment.
+ *
+ *    Returns 0 if the top and bottom queue_limits are compatible.  The
+ *    top device's block sizes and alignment offsets may be adjusted to
+ *    ensure alignment with the bottom device. If no compatible sizes
+ *    and alignments exist, -1 is returned and the resulting top
+ *    queue_limits will have the misaligned flag set to indicate that
+ *    the alignment_offset is undefined.
  */
 int blk_stack_limits(struct queue_limits *t, struct queue_limits *b,
-		     sector_t offset)
+		     sector_t start)
 {
-	int ret;
-
-	ret = 0;
+	unsigned int top, bottom, alignment, ret = 0;
 
 	t->max_sectors = min_not_zero(t->max_sectors, b->max_sectors);
 	t->max_hw_sectors = min_not_zero(t->max_hw_sectors, b->max_hw_sectors);
@@ -528,15 +504,31 @@ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b,
 	t->seg_boundary_mask = min_not_zero(t->seg_boundary_mask,
 					    b->seg_boundary_mask);
 
-	t->max_phys_segments = min_not_zero(t->max_phys_segments,
-					    b->max_phys_segments);
-
-	t->max_hw_segments = min_not_zero(t->max_hw_segments,
-					  b->max_hw_segments);
+	t->max_segments = min_not_zero(t->max_segments, b->max_segments);
 
 	t->max_segment_size = min_not_zero(t->max_segment_size,
 					   b->max_segment_size);
 
+	t->misaligned |= b->misaligned;
+
+	alignment = queue_limit_alignment_offset(b, start);
+
+	/* Bottom device has different alignment.  Check that it is
+	 * compatible with the current top alignment.
+	 */
+	if (t->alignment_offset != alignment) {
+
+		top = max(t->physical_block_size, t->io_min)
+			+ t->alignment_offset;
+		bottom = max(b->physical_block_size, b->io_min) + alignment;
+
+		/* Verify that top and bottom intervals line up */
+		if (max(top, bottom) & (min(top, bottom) - 1)) {
+			t->misaligned = 1;
+			ret = -1;
+		}
+	}
+
 	t->logical_block_size = max(t->logical_block_size,
 				    b->logical_block_size);
 
@@ -544,67 +536,99 @@ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b,
 				     b->physical_block_size);
 
 	t->io_min = max(t->io_min, b->io_min);
+	t->io_opt = lcm(t->io_opt, b->io_opt);
+
 	t->no_cluster |= b->no_cluster;
 	t->discard_zeroes_data &= b->discard_zeroes_data;
 
-	/* Bottom device offset aligned? */
-	if (offset &&
-	    (offset & (b->physical_block_size - 1)) != b->alignment_offset) {
+	/* Physical block size a multiple of the logical block size? */
+	if (t->physical_block_size & (t->logical_block_size - 1)) {
+		t->physical_block_size = t->logical_block_size;
 		t->misaligned = 1;
 		ret = -1;
 	}
 
-	/*
-	 * Temporarily disable discard granularity. It's currently buggy
-	 * since we default to 0 for discard_granularity, hence this
-	 * "failure" will always trigger for non-zero offsets.
-	 */
-#if 0
-	if (offset &&
-	    (offset & (b->discard_granularity - 1)) != b->discard_alignment) {
-		t->discard_misaligned = 1;
+	/* Minimum I/O a multiple of the physical block size? */
+	if (t->io_min & (t->physical_block_size - 1)) {
+		t->io_min = t->physical_block_size;
+		t->misaligned = 1;
 		ret = -1;
 	}
-#endif
 
-	/* If top has no alignment offset, inherit from bottom */
-	if (!t->alignment_offset)
-		t->alignment_offset =
-			b->alignment_offset & (b->physical_block_size - 1);
+	/* Optimal I/O a multiple of the physical block size? */
+	if (t->io_opt & (t->physical_block_size - 1)) {
+		t->io_opt = 0;
+		t->misaligned = 1;
+		ret = -1;
+	}
 
-	if (!t->discard_alignment)
-		t->discard_alignment =
-			b->discard_alignment & (b->discard_granularity - 1);
+	/* Find lowest common alignment_offset */
+	t->alignment_offset = lcm(t->alignment_offset, alignment)
+		& (max(t->physical_block_size, t->io_min) - 1);
 
-	/* Top device aligned on logical block boundary? */
+	/* Verify that new alignment_offset is on a logical block boundary */
 	if (t->alignment_offset & (t->logical_block_size - 1)) {
 		t->misaligned = 1;
 		ret = -1;
 	}
 
-	/* Find lcm() of optimal I/O size and granularity */
-	t->io_opt = lcm(t->io_opt, b->io_opt);
-	t->discard_granularity = lcm(t->discard_granularity,
-				     b->discard_granularity);
-
-	/* Verify that optimal I/O size is a multiple of io_min */
-	if (t->io_min && t->io_opt % t->io_min)
-		ret = -1;
+	/* Discard alignment and granularity */
+	if (b->discard_granularity) {
+		alignment = queue_limit_discard_alignment(b, start);
+
+		if (t->discard_granularity != 0 &&
+		    t->discard_alignment != alignment) {
+			top = t->discard_granularity + t->discard_alignment;
+			bottom = b->discard_granularity + alignment;
+
+			/* Verify that top and bottom intervals line up */
+			if (max(top, bottom) & (min(top, bottom) - 1))
+				t->discard_misaligned = 1;
+		}
+
+		t->max_discard_sectors = min_not_zero(t->max_discard_sectors,
+						      b->max_discard_sectors);
+		t->discard_granularity = max(t->discard_granularity,
+					     b->discard_granularity);
+		t->discard_alignment = lcm(t->discard_alignment, alignment) &
+			(t->discard_granularity - 1);
+	}
 
 	return ret;
 }
 EXPORT_SYMBOL(blk_stack_limits);
 
 /**
+ * bdev_stack_limits - adjust queue limits for stacked drivers
+ * @t:	the stacking driver limits (top device)
+ * @bdev:  the component block_device (bottom)
+ * @start:  first data sector within component device
+ *
+ * Description:
+ *    Merges queue limits for a top device and a block_device.  Returns
+ *    0 if alignment didn't change.  Returns -1 if adding the bottom
+ *    device caused misalignment.
+ */
+int bdev_stack_limits(struct queue_limits *t, struct block_device *bdev,
+		      sector_t start)
+{
+	struct request_queue *bq = bdev_get_queue(bdev);
+
+	start += get_start_sect(bdev);
+
+	return blk_stack_limits(t, &bq->limits, start);
+}
+EXPORT_SYMBOL(bdev_stack_limits);
+
+/**
  * disk_stack_limits - adjust queue limits for stacked drivers
  * @disk:  MD/DM gendisk (top)
  * @bdev:  the underlying block device (bottom)
  * @offset:  offset to beginning of data within component device
  *
  * Description:
- *    Merges the limits for two queues.  Returns 0 if alignment
- *    didn't change.  Returns -1 if adding the bottom device caused
- *    misalignment.
+ *    Merges the limits for a top level gendisk and a bottom level
+ *    block_device.
  */
 void disk_stack_limits(struct gendisk *disk, struct block_device *bdev,
 		       sector_t offset)
@@ -612,9 +636,7 @@ void disk_stack_limits(struct gendisk *disk, struct block_device *bdev,
 	struct request_queue *t = disk->queue;
 	struct request_queue *b = bdev_get_queue(bdev);
 
-	offset += get_start_sect(bdev) << 9;
-
-	if (blk_stack_limits(&t->limits, &b->limits, offset) < 0) {
+	if (bdev_stack_limits(&t->limits, bdev, offset >> 9) < 0) {
 		char top[BDEVNAME_SIZE], bottom[BDEVNAME_SIZE];
 
 		disk_name(disk, 0, top);
@@ -686,22 +708,19 @@ EXPORT_SYMBOL(blk_queue_update_dma_pad);
  * does is adjust the queue so that the buf is always appended
  * silently to the scatterlist.
  *
- * Note: This routine adjusts max_hw_segments to make room for
- * appending the drain buffer.  If you call
- * blk_queue_max_hw_segments() or blk_queue_max_phys_segments() after
- * calling this routine, you must set the limit to one fewer than your
- * device can support otherwise there won't be room for the drain
- * buffer.
+ * Note: This routine adjusts max_hw_segments to make room for appending
+ * the drain buffer.  If you call blk_queue_max_segments() after calling
+ * this routine, you must set the limit to one fewer than your device
+ * can support otherwise there won't be room for the drain buffer.
  */
 int blk_queue_dma_drain(struct request_queue *q,
 			       dma_drain_needed_fn *dma_drain_needed,
 			       void *buf, unsigned int size)
 {
-	if (queue_max_hw_segments(q) < 2 || queue_max_phys_segments(q) < 2)
+	if (queue_max_segments(q) < 2)
 		return -EINVAL;
 	/* make room for appending the drain */
-	blk_queue_max_hw_segments(q, queue_max_hw_segments(q) - 1);
-	blk_queue_max_phys_segments(q, queue_max_phys_segments(q) - 1);
+	blk_queue_max_segments(q, queue_max_segments(q) - 1);
 	q->dma_drain_needed = dma_drain_needed;
 	q->dma_drain_buffer = buf;
 	q->dma_drain_size = size;