diff options
Diffstat (limited to 'drivers/acpi/acpica/dsopcode.c')
| -rw-r--r-- | drivers/acpi/acpica/dsopcode.c | 1469 |
1 files changed, 1469 insertions, 0 deletions
diff --git a/drivers/acpi/acpica/dsopcode.c b/drivers/acpi/acpica/dsopcode.c new file mode 100644 index 00000000000..0c3b4dd60e8 --- /dev/null +++ b/drivers/acpi/acpica/dsopcode.c @@ -0,0 +1,1469 @@ +/****************************************************************************** + * + * Module Name: dsopcode - Dispatcher Op Region support and handling of + * "control" opcodes + * + *****************************************************************************/ + +/* + * Copyright (C) 2000 - 2008, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include <acpi/acpi.h> +#include "accommon.h" +#include "acparser.h" +#include "amlcode.h" +#include "acdispat.h" +#include "acinterp.h" +#include "acnamesp.h" +#include "acevents.h" +#include "actables.h" + +#define _COMPONENT ACPI_DISPATCHER +ACPI_MODULE_NAME("dsopcode") + +/* Local prototypes */ +static acpi_status +acpi_ds_execute_arguments(struct acpi_namespace_node *node, + struct acpi_namespace_node *scope_node, + u32 aml_length, u8 * aml_start); + +static acpi_status +acpi_ds_init_buffer_field(u16 aml_opcode, + union acpi_operand_object *obj_desc, + union acpi_operand_object *buffer_desc, + union acpi_operand_object *offset_desc, + union acpi_operand_object *length_desc, + union acpi_operand_object *result_desc); + +/******************************************************************************* + * + * FUNCTION: acpi_ds_execute_arguments + * + * PARAMETERS: Node - Object NS node + * scope_node - Parent NS node + * aml_length - Length of executable AML + * aml_start - Pointer to the AML + * + * RETURN: Status. + * + * DESCRIPTION: Late (deferred) execution of region or field arguments + * + ******************************************************************************/ + +static acpi_status +acpi_ds_execute_arguments(struct acpi_namespace_node *node, + struct acpi_namespace_node *scope_node, + u32 aml_length, u8 * aml_start) +{ + acpi_status status; + union acpi_parse_object *op; + struct acpi_walk_state *walk_state; + + ACPI_FUNCTION_TRACE(ds_execute_arguments); + + /* + * Allocate a new parser op to be the root of the parsed tree + */ + op = acpi_ps_alloc_op(AML_INT_EVAL_SUBTREE_OP); + if (!op) { + return_ACPI_STATUS(AE_NO_MEMORY); + } + + /* Save the Node for use in acpi_ps_parse_aml */ + + op->common.node = scope_node; + + /* Create and initialize a new parser state */ + + walk_state = acpi_ds_create_walk_state(0, NULL, NULL, NULL); + if (!walk_state) { + status = AE_NO_MEMORY; + goto cleanup; + } + + status = acpi_ds_init_aml_walk(walk_state, op, NULL, aml_start, + aml_length, NULL, ACPI_IMODE_LOAD_PASS1); + if (ACPI_FAILURE(status)) { + acpi_ds_delete_walk_state(walk_state); + goto cleanup; + } + + /* Mark this parse as a deferred opcode */ + + walk_state->parse_flags = ACPI_PARSE_DEFERRED_OP; + walk_state->deferred_node = node; + + /* Pass1: Parse the entire declaration */ + + status = acpi_ps_parse_aml(walk_state); + if (ACPI_FAILURE(status)) { + goto cleanup; + } + + /* Get and init the Op created above */ + + op->common.node = node; + acpi_ps_delete_parse_tree(op); + + /* Evaluate the deferred arguments */ + + op = acpi_ps_alloc_op(AML_INT_EVAL_SUBTREE_OP); + if (!op) { + return_ACPI_STATUS(AE_NO_MEMORY); + } + + op->common.node = scope_node; + + /* Create and initialize a new parser state */ + + walk_state = acpi_ds_create_walk_state(0, NULL, NULL, NULL); + if (!walk_state) { + status = AE_NO_MEMORY; + goto cleanup; + } + + /* Execute the opcode and arguments */ + + status = acpi_ds_init_aml_walk(walk_state, op, NULL, aml_start, + aml_length, NULL, ACPI_IMODE_EXECUTE); + if (ACPI_FAILURE(status)) { + acpi_ds_delete_walk_state(walk_state); + goto cleanup; + } + + /* Mark this execution as a deferred opcode */ + + walk_state->deferred_node = node; + status = acpi_ps_parse_aml(walk_state); + + cleanup: + acpi_ps_delete_parse_tree(op); + return_ACPI_STATUS(status); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ds_get_buffer_field_arguments + * + * PARAMETERS: obj_desc - A valid buffer_field object + * + * RETURN: Status. + * + * DESCRIPTION: Get buffer_field Buffer and Index. This implements the late + * evaluation of these field attributes. + * + ******************************************************************************/ + +acpi_status +acpi_ds_get_buffer_field_arguments(union acpi_operand_object *obj_desc) +{ + union acpi_operand_object *extra_desc; + struct acpi_namespace_node *node; + acpi_status status; + + ACPI_FUNCTION_TRACE_PTR(ds_get_buffer_field_arguments, obj_desc); + + if (obj_desc->common.flags & AOPOBJ_DATA_VALID) { + return_ACPI_STATUS(AE_OK); + } + + /* Get the AML pointer (method object) and buffer_field node */ + + extra_desc = acpi_ns_get_secondary_object(obj_desc); + node = obj_desc->buffer_field.node; + + ACPI_DEBUG_EXEC(acpi_ut_display_init_pathname + (ACPI_TYPE_BUFFER_FIELD, node, NULL)); + ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "[%4.4s] BufferField Arg Init\n", + acpi_ut_get_node_name(node))); + + /* Execute the AML code for the term_arg arguments */ + + status = acpi_ds_execute_arguments(node, acpi_ns_get_parent_node(node), + extra_desc->extra.aml_length, + extra_desc->extra.aml_start); + return_ACPI_STATUS(status); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ds_get_bank_field_arguments + * + * PARAMETERS: obj_desc - A valid bank_field object + * + * RETURN: Status. + * + * DESCRIPTION: Get bank_field bank_value. This implements the late + * evaluation of these field attributes. + * + ******************************************************************************/ + +acpi_status +acpi_ds_get_bank_field_arguments(union acpi_operand_object *obj_desc) +{ + union acpi_operand_object *extra_desc; + struct acpi_namespace_node *node; + acpi_status status; + + ACPI_FUNCTION_TRACE_PTR(ds_get_bank_field_arguments, obj_desc); + + if (obj_desc->common.flags & AOPOBJ_DATA_VALID) { + return_ACPI_STATUS(AE_OK); + } + + /* Get the AML pointer (method object) and bank_field node */ + + extra_desc = acpi_ns_get_secondary_object(obj_desc); + node = obj_desc->bank_field.node; + + ACPI_DEBUG_EXEC(acpi_ut_display_init_pathname + (ACPI_TYPE_LOCAL_BANK_FIELD, node, NULL)); + ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "[%4.4s] BankField Arg Init\n", + acpi_ut_get_node_name(node))); + + /* Execute the AML code for the term_arg arguments */ + + status = acpi_ds_execute_arguments(node, acpi_ns_get_parent_node(node), + extra_desc->extra.aml_length, + extra_desc->extra.aml_start); + return_ACPI_STATUS(status); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ds_get_buffer_arguments + * + * PARAMETERS: obj_desc - A valid Buffer object + * + * RETURN: Status. + * + * DESCRIPTION: Get Buffer length and initializer byte list. This implements + * the late evaluation of these attributes. + * + ******************************************************************************/ + +acpi_status acpi_ds_get_buffer_arguments(union acpi_operand_object *obj_desc) +{ + struct acpi_namespace_node *node; + acpi_status status; + + ACPI_FUNCTION_TRACE_PTR(ds_get_buffer_arguments, obj_desc); + + if (obj_desc->common.flags & AOPOBJ_DATA_VALID) { + return_ACPI_STATUS(AE_OK); + } + + /* Get the Buffer node */ + + node = obj_desc->buffer.node; + if (!node) { + ACPI_ERROR((AE_INFO, + "No pointer back to NS node in buffer obj %p", + obj_desc)); + return_ACPI_STATUS(AE_AML_INTERNAL); + } + + ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Buffer Arg Init\n")); + + /* Execute the AML code for the term_arg arguments */ + + status = acpi_ds_execute_arguments(node, node, + obj_desc->buffer.aml_length, + obj_desc->buffer.aml_start); + return_ACPI_STATUS(status); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ds_get_package_arguments + * + * PARAMETERS: obj_desc - A valid Package object + * + * RETURN: Status. + * + * DESCRIPTION: Get Package length and initializer byte list. This implements + * the late evaluation of these attributes. + * + ******************************************************************************/ + +acpi_status acpi_ds_get_package_arguments(union acpi_operand_object *obj_desc) +{ + struct acpi_namespace_node *node; + acpi_status status; + + ACPI_FUNCTION_TRACE_PTR(ds_get_package_arguments, obj_desc); + + if (obj_desc->common.flags & AOPOBJ_DATA_VALID) { + return_ACPI_STATUS(AE_OK); + } + + /* Get the Package node */ + + node = obj_desc->package.node; + if (!node) { + ACPI_ERROR((AE_INFO, + "No pointer back to NS node in package %p", + obj_desc)); + return_ACPI_STATUS(AE_AML_INTERNAL); + } + + ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Package Arg Init\n")); + + /* Execute the AML code for the term_arg arguments */ + + status = acpi_ds_execute_arguments(node, node, + obj_desc->package.aml_length, + obj_desc->package.aml_start); + return_ACPI_STATUS(status); +} + +/***************************************************************************** + * + * FUNCTION: acpi_ds_get_region_arguments + * + * PARAMETERS: obj_desc - A valid region object + * + * RETURN: Status. + * + * DESCRIPTION: Get region address and length. This implements the late + * evaluation of these region attributes. + * + ****************************************************************************/ + +acpi_status acpi_ds_get_region_arguments(union acpi_operand_object *obj_desc) +{ + struct acpi_namespace_node *node; + acpi_status status; + union acpi_operand_object *extra_desc; + + ACPI_FUNCTION_TRACE_PTR(ds_get_region_arguments, obj_desc); + + if (obj_desc->region.flags & AOPOBJ_DATA_VALID) { + return_ACPI_STATUS(AE_OK); + } + + extra_desc = acpi_ns_get_secondary_object(obj_desc); + if (!extra_desc) { + return_ACPI_STATUS(AE_NOT_EXIST); + } + + /* Get the Region node */ + + node = obj_desc->region.node; + + ACPI_DEBUG_EXEC(acpi_ut_display_init_pathname + (ACPI_TYPE_REGION, node, NULL)); + + ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "[%4.4s] OpRegion Arg Init at AML %p\n", + acpi_ut_get_node_name(node), + extra_desc->extra.aml_start)); + + /* Execute the argument AML */ + + status = acpi_ds_execute_arguments(node, acpi_ns_get_parent_node(node), + extra_desc->extra.aml_length, + extra_desc->extra.aml_start); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + /* Validate the region address/length via the host OS */ + + status = acpi_os_validate_address(obj_desc->region.space_id, + obj_desc->region.address, + (acpi_size) obj_desc->region.length, + acpi_ut_get_node_name(node)); + + if (ACPI_FAILURE(status)) { + /* + * Invalid address/length. We will emit an error message and mark + * the region as invalid, so that it will cause an additional error if + * it is ever used. Then return AE_OK. + */ + ACPI_EXCEPTION((AE_INFO, status, + "During address validation of OpRegion [%4.4s]", + node->name.ascii)); + obj_desc->common.flags |= AOPOBJ_INVALID; + status = AE_OK; + } + + return_ACPI_STATUS(status); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ds_initialize_region + * + * PARAMETERS: obj_handle - Region namespace node + * + * RETURN: Status + * + * DESCRIPTION: Front end to ev_initialize_region + * + ******************************************************************************/ + +acpi_status acpi_ds_initialize_region(acpi_handle obj_handle) +{ + union acpi_operand_object *obj_desc; + acpi_status status; + + obj_desc = acpi_ns_get_attached_object(obj_handle); + + /* Namespace is NOT locked */ + + status = acpi_ev_initialize_region(obj_desc, FALSE); + return (status); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ds_init_buffer_field + * + * PARAMETERS: aml_opcode - create_xxx_field + * obj_desc - buffer_field object + * buffer_desc - Host Buffer + * offset_desc - Offset into buffer + * length_desc - Length of field (CREATE_FIELD_OP only) + * result_desc - Where to store the result + * + * RETURN: Status + * + * DESCRIPTION: Perform actual initialization of a buffer field + * + ******************************************************************************/ + +static acpi_status +acpi_ds_init_buffer_field(u16 aml_opcode, + union acpi_operand_object *obj_desc, + union acpi_operand_object *buffer_desc, + union acpi_operand_object *offset_desc, + union acpi_operand_object *length_desc, + union acpi_operand_object *result_desc) +{ + u32 offset; + u32 bit_offset; + u32 bit_count; + u8 field_flags; + acpi_status status; + + ACPI_FUNCTION_TRACE_PTR(ds_init_buffer_field, obj_desc); + + /* Host object must be a Buffer */ + + if (ACPI_GET_OBJECT_TYPE(buffer_desc) != ACPI_TYPE_BUFFER) { + ACPI_ERROR((AE_INFO, + "Target of Create Field is not a Buffer object - %s", + acpi_ut_get_object_type_name(buffer_desc))); + + status = AE_AML_OPERAND_TYPE; + goto cleanup; + } + + /* + * The last parameter to all of these opcodes (result_desc) started + * out as a name_string, and should therefore now be a NS node + * after resolution in acpi_ex_resolve_operands(). + */ + if (ACPI_GET_DESCRIPTOR_TYPE(result_desc) != ACPI_DESC_TYPE_NAMED) { + ACPI_ERROR((AE_INFO, + "(%s) destination not a NS Node [%s]", + acpi_ps_get_opcode_name(aml_opcode), + acpi_ut_get_descriptor_name(result_desc))); + + status = AE_AML_OPERAND_TYPE; + goto cleanup; + } + + offset = (u32) offset_desc->integer.value; + + /* + * Setup the Bit offsets and counts, according to the opcode + */ + switch (aml_opcode) { + case AML_CREATE_FIELD_OP: + + /* Offset is in bits, count is in bits */ + + field_flags = AML_FIELD_ACCESS_BYTE; + bit_offset = offset; + bit_count = (u32) length_desc->integer.value; + + /* Must have a valid (>0) bit count */ + + if (bit_count == 0) { + ACPI_ERROR((AE_INFO, + "Attempt to CreateField of length zero")); + status = AE_AML_OPERAND_VALUE; + goto cleanup; + } + break; + + case AML_CREATE_BIT_FIELD_OP: + + /* Offset is in bits, Field is one bit */ + + bit_offset = offset; + bit_count = 1; + field_flags = AML_FIELD_ACCESS_BYTE; + break; + + case AML_CREATE_BYTE_FIELD_OP: + + /* Offset is in bytes, field is one byte */ + + bit_offset = 8 * offset; + bit_count = 8; + field_flags = AML_FIELD_ACCESS_BYTE; + break; + + case AML_CREATE_WORD_FIELD_OP: + + /* Offset is in bytes, field is one word */ + + bit_offset = 8 * offset; + bit_count = 16; + field_flags = AML_FIELD_ACCESS_WORD; + break; + + case AML_CREATE_DWORD_FIELD_OP: + + /* Offset is in bytes, field is one dword */ + + bit_offset = 8 * offset; + bit_count = 32; + field_flags = AML_FIELD_ACCESS_DWORD; + break; + + case AML_CREATE_QWORD_FIELD_OP: + + /* Offset is in bytes, field is one qword */ + + bit_offset = 8 * offset; + bit_count = 64; + field_flags = AML_FIELD_ACCESS_QWORD; + break; + + default: + + ACPI_ERROR((AE_INFO, + "Unknown field creation opcode %02x", aml_opcode)); + status = AE_AML_BAD_OPCODE; + goto cleanup; + } + + /* Entire field must fit within the current length of the buffer */ + + if ((bit_offset + bit_count) > (8 * (u32) buffer_desc->buffer.length)) { + ACPI_ERROR((AE_INFO, + "Field [%4.4s] at %d exceeds Buffer [%4.4s] size %d (bits)", + acpi_ut_get_node_name(result_desc), + bit_offset + bit_count, + acpi_ut_get_node_name(buffer_desc->buffer.node), + 8 * (u32) buffer_desc->buffer.length)); + status = AE_AML_BUFFER_LIMIT; + goto cleanup; + } + + /* + * Initialize areas of the field object that are common to all fields + * For field_flags, use LOCK_RULE = 0 (NO_LOCK), + * UPDATE_RULE = 0 (UPDATE_PRESERVE) + */ + status = acpi_ex_prep_common_field_object(obj_desc, field_flags, 0, + bit_offset, bit_count); + if (ACPI_FAILURE(status)) { + goto cleanup; + } + + obj_desc->buffer_field.buffer_obj = buffer_desc; + + /* Reference count for buffer_desc inherits obj_desc count */ + + buffer_desc->common.reference_count = (u16) + (buffer_desc->common.reference_count + + obj_desc->common.reference_count); + + cleanup: + + /* Always delete the operands */ + + acpi_ut_remove_reference(offset_desc); + acpi_ut_remove_reference(buffer_desc); + + if (aml_opcode == AML_CREATE_FIELD_OP) { + acpi_ut_remove_reference(length_desc); + } + + /* On failure, delete the result descriptor */ + + if (ACPI_FAILURE(status)) { + acpi_ut_remove_reference(result_desc); /* Result descriptor */ + } else { + /* Now the address and length are valid for this buffer_field */ + + obj_desc->buffer_field.flags |= AOPOBJ_DATA_VALID; + } + + return_ACPI_STATUS(status); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ds_eval_buffer_field_operands + * + * PARAMETERS: walk_state - Current walk + * Op - A valid buffer_field Op object + * + * RETURN: Status + * + * DESCRIPTION: Get buffer_field Buffer and Index + * Called from acpi_ds_exec_end_op during buffer_field parse tree walk + * + ******************************************************************************/ + +acpi_status +acpi_ds_eval_buffer_field_operands(struct acpi_walk_state *walk_state, + union acpi_parse_object *op) +{ + acpi_status status; + union acpi_operand_object *obj_desc; + struct acpi_namespace_node *node; + union acpi_parse_object *next_op; + + ACPI_FUNCTION_TRACE_PTR(ds_eval_buffer_field_operands, op); + + /* + * This is where we evaluate the address and length fields of the + * create_xxx_field declaration + */ + node = op->common.node; + + /* next_op points to the op that holds the Buffer */ + + next_op = op->common.value.arg; + + /* Evaluate/create the address and length operands */ + + status = acpi_ds_create_operands(walk_state, next_op); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + obj_desc = acpi_ns_get_attached_object(node); + if (!obj_desc) { + return_ACPI_STATUS(AE_NOT_EXIST); + } + + /* Resolve the operands */ + + status = acpi_ex_resolve_operands(op->common.aml_opcode, + ACPI_WALK_OPERANDS, walk_state); + if (ACPI_FAILURE(status)) { + ACPI_ERROR((AE_INFO, "(%s) bad operand(s) (%X)", + acpi_ps_get_opcode_name(op->common.aml_opcode), + status)); + + return_ACPI_STATUS(status); + } + + /* Initialize the Buffer Field */ + + if (op->common.aml_opcode == AML_CREATE_FIELD_OP) { + + /* NOTE: Slightly different operands for this opcode */ + + status = + acpi_ds_init_buffer_field(op->common.aml_opcode, obj_desc, + walk_state->operands[0], + walk_state->operands[1], + walk_state->operands[2], + walk_state->operands[3]); + } else { + /* All other, create_xxx_field opcodes */ + + status = + acpi_ds_init_buffer_field(op->common.aml_opcode, obj_desc, + walk_state->operands[0], + walk_state->operands[1], NULL, + walk_state->operands[2]); + } + + return_ACPI_STATUS(status); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ds_eval_region_operands + * + * PARAMETERS: walk_state - Current walk + * Op - A valid region Op object + * + * RETURN: Status + * + * DESCRIPTION: Get region address and length + * Called from acpi_ds_exec_end_op during op_region parse tree walk + * + ******************************************************************************/ + +acpi_status +acpi_ds_eval_region_operands(struct acpi_walk_state *walk_state, + union acpi_parse_object *op) +{ + acpi_status status; + union acpi_operand_object *obj_desc; + union acpi_operand_object *operand_desc; + struct acpi_namespace_node *node; + union acpi_parse_object *next_op; + + ACPI_FUNCTION_TRACE_PTR(ds_eval_region_operands, op); + + /* + * This is where we evaluate the address and length fields of the + * op_region declaration + */ + node = op->common.node; + + /* next_op points to the op that holds the space_iD */ + + next_op = op->common.value.arg; + + /* next_op points to address op */ + + next_op = next_op->common.next; + + /* Evaluate/create the address and length operands */ + + status = acpi_ds_create_operands(walk_state, next_op); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + /* Resolve the length and address operands to numbers */ + + status = acpi_ex_resolve_operands(op->common.aml_opcode, + ACPI_WALK_OPERANDS, walk_state); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + obj_desc = acpi_ns_get_attached_object(node); + if (!obj_desc) { + return_ACPI_STATUS(AE_NOT_EXIST); + } + + /* + * Get the length operand and save it + * (at Top of stack) + */ + operand_desc = walk_state->operands[walk_state->num_operands - 1]; + + obj_desc->region.length = (u32) operand_desc->integer.value; + acpi_ut_remove_reference(operand_desc); + + /* + * Get the address and save it + * (at top of stack - 1) + */ + operand_desc = walk_state->operands[walk_state->num_operands - 2]; + + obj_desc->region.address = (acpi_physical_address) + operand_desc->integer.value; + acpi_ut_remove_reference(operand_desc); + + ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "RgnObj %p Addr %8.8X%8.8X Len %X\n", + obj_desc, + ACPI_FORMAT_NATIVE_UINT(obj_desc->region.address), + obj_desc->region.length)); + + /* Now the address and length are valid for this opregion */ + + obj_desc->region.flags |= AOPOBJ_DATA_VALID; + + return_ACPI_STATUS(status); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ds_eval_table_region_operands + * + * PARAMETERS: walk_state - Current walk + * Op - A valid region Op object + * + * RETURN: Status + * + * DESCRIPTION: Get region address and length + * Called from acpi_ds_exec_end_op during data_table_region parse tree walk + * + ******************************************************************************/ + +acpi_status +acpi_ds_eval_table_region_operands(struct acpi_walk_state *walk_state, + union acpi_parse_object *op) +{ + acpi_status status; + union acpi_operand_object *obj_desc; + union acpi_operand_object **operand; + struct acpi_namespace_node *node; + union acpi_parse_object *next_op; + u32 table_index; + struct acpi_table_header *table; + + ACPI_FUNCTION_TRACE_PTR(ds_eval_table_region_operands, op); + + /* + * This is where we evaluate the signature_string and oem_iDString + * and oem_table_iDString of the data_table_region declaration + */ + node = op->common.node; + + /* next_op points to signature_string op */ + + next_op = op->common.value.arg; + + /* + * Evaluate/create the signature_string and oem_iDString + * and oem_table_iDString operands + */ + status = acpi_ds_create_operands(walk_state, next_op); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + /* + * Resolve the signature_string and oem_iDString + * and oem_table_iDString operands + */ + status = acpi_ex_resolve_operands(op->common.aml_opcode, + ACPI_WALK_OPERANDS, walk_state); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + operand = &walk_state->operands[0]; + + /* Find the ACPI table */ + + status = acpi_tb_find_table(operand[0]->string.pointer, + operand[1]->string.pointer, + operand[2]->string.pointer, &table_index); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + acpi_ut_remove_reference(operand[0]); + acpi_ut_remove_reference(operand[1]); + acpi_ut_remove_reference(operand[2]); + + status = acpi_get_table_by_index(table_index, &table); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + obj_desc = acpi_ns_get_attached_object(node); + if (!obj_desc) { + return_ACPI_STATUS(AE_NOT_EXIST); + } + + obj_desc->region.address = + (acpi_physical_address) ACPI_TO_INTEGER(table); + obj_desc->region.length = table->length; + + ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "RgnObj %p Addr %8.8X%8.8X Len %X\n", + obj_desc, + ACPI_FORMAT_NATIVE_UINT(obj_desc->region.address), + obj_desc->region.length)); + + /* Now the address and length are valid for this opregion */ + + obj_desc->region.flags |= AOPOBJ_DATA_VALID; + + return_ACPI_STATUS(status); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ds_eval_data_object_operands + * + * PARAMETERS: walk_state - Current walk + * Op - A valid data_object Op object + * obj_desc - data_object + * + * RETURN: Status + * + * DESCRIPTION: Get the operands and complete the following data object types: + * Buffer, Package. + * + ******************************************************************************/ + +acpi_status +acpi_ds_eval_data_object_operands(struct acpi_walk_state *walk_state, + union acpi_parse_object *op, + union acpi_operand_object *obj_desc) +{ + acpi_status status; + union acpi_operand_object *arg_desc; + u32 length; + + ACPI_FUNCTION_TRACE(ds_eval_data_object_operands); + + /* The first operand (for all of these data objects) is the length */ + + /* + * Set proper index into operand stack for acpi_ds_obj_stack_push + * invoked inside acpi_ds_create_operand. + */ + walk_state->operand_index = walk_state->num_operands; + + status = acpi_ds_create_operand(walk_state, op->common.value.arg, 1); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + status = acpi_ex_resolve_operands(walk_state->opcode, + &(walk_state-> + operands[walk_state->num_operands - + 1]), walk_state); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + /* Extract length operand */ + + arg_desc = walk_state->operands[walk_state->num_operands - 1]; + length = (u32) arg_desc->integer.value; + + /* Cleanup for length operand */ + + status = acpi_ds_obj_stack_pop(1, walk_state); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + acpi_ut_remove_reference(arg_desc); + + /* + * Create the actual data object + */ + switch (op->common.aml_opcode) { + case AML_BUFFER_OP: + + status = + acpi_ds_build_internal_buffer_obj(walk_state, op, length, + &obj_desc); + break; + + case AML_PACKAGE_OP: + case AML_VAR_PACKAGE_OP: + + status = + acpi_ds_build_internal_package_obj(walk_state, op, length, + &obj_desc); + break; + + default: + return_ACPI_STATUS(AE_AML_BAD_OPCODE); + } + + if (ACPI_SUCCESS(status)) { + /* + * Return the object in the walk_state, unless the parent is a package - + * in this case, the return object will be stored in the parse tree + * for the package. + */ + if ((!op->common.parent) || + ((op->common.parent->common.aml_opcode != AML_PACKAGE_OP) && + (op->common.parent->common.aml_opcode != + AML_VAR_PACKAGE_OP) + && (op->common.parent->common.aml_opcode != AML_NAME_OP))) { + walk_state->result_obj = obj_desc; + } + } + + return_ACPI_STATUS(status); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ds_eval_bank_field_operands + * + * PARAMETERS: walk_state - Current walk + * Op - A valid bank_field Op object + * + * RETURN: Status + * + * DESCRIPTION: Get bank_field bank_value + * Called from acpi_ds_exec_end_op during bank_field parse tree walk + * + ******************************************************************************/ + +acpi_status +acpi_ds_eval_bank_field_operands(struct acpi_walk_state *walk_state, + union acpi_parse_object *op) +{ + acpi_status status; + union acpi_operand_object *obj_desc; + union acpi_operand_object *operand_desc; + struct acpi_namespace_node *node; + union acpi_parse_object *next_op; + union acpi_parse_object *arg; + + ACPI_FUNCTION_TRACE_PTR(ds_eval_bank_field_operands, op); + + /* + * This is where we evaluate the bank_value field of the + * bank_field declaration + */ + + /* next_op points to the op that holds the Region */ + + next_op = op->common.value.arg; + + /* next_op points to the op that holds the Bank Register */ + + next_op = next_op->common.next; + + /* next_op points to the op that holds the Bank Value */ + + next_op = next_op->common.next; + + /* + * Set proper index into operand stack for acpi_ds_obj_stack_push + * invoked inside acpi_ds_create_operand. + * + * We use walk_state->Operands[0] to store the evaluated bank_value + */ + walk_state->operand_index = 0; + + status = acpi_ds_create_operand(walk_state, next_op, 0); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + status = acpi_ex_resolve_to_value(&walk_state->operands[0], walk_state); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + ACPI_DUMP_OPERANDS(ACPI_WALK_OPERANDS, + acpi_ps_get_opcode_name(op->common.aml_opcode), 1); + /* + * Get the bank_value operand and save it + * (at Top of stack) + */ + operand_desc = walk_state->operands[0]; + + /* Arg points to the start Bank Field */ + + arg = acpi_ps_get_arg(op, 4); + while (arg) { + + /* Ignore OFFSET and ACCESSAS terms here */ + + if (arg->common.aml_opcode == AML_INT_NAMEDFIELD_OP) { + node = arg->common.node; + + obj_desc = acpi_ns_get_attached_object(node); + if (!obj_desc) { + return_ACPI_STATUS(AE_NOT_EXIST); + } + + obj_desc->bank_field.value = + (u32) operand_desc->integer.value; + } + + /* Move to next field in the list */ + + arg = arg->common.next; + } + + acpi_ut_remove_reference(operand_desc); + return_ACPI_STATUS(status); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ds_exec_begin_control_op + * + * PARAMETERS: walk_list - The list that owns the walk stack + * Op - The control Op + * + * RETURN: Status + * + * DESCRIPTION: Handles all control ops encountered during control method + * execution. + * + ******************************************************************************/ + +acpi_status +acpi_ds_exec_begin_control_op(struct acpi_walk_state *walk_state, + union acpi_parse_object *op) +{ + acpi_status status = AE_OK; + union acpi_generic_state *control_state; + + ACPI_FUNCTION_NAME(ds_exec_begin_control_op); + + ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "Op=%p Opcode=%2.2X State=%p\n", op, + op->common.aml_opcode, walk_state)); + + switch (op->common.aml_opcode) { + case AML_WHILE_OP: + + /* + * If this is an additional iteration of a while loop, continue. + * There is no need to allocate a new control state. + */ + if (walk_state->control_state) { + if (walk_state->control_state->control.aml_predicate_start + == (walk_state->parser_state.aml - 1)) { + + /* Reset the state to start-of-loop */ + + walk_state->control_state->common.state = + ACPI_CONTROL_CONDITIONAL_EXECUTING; + break; + } + } + + /*lint -fallthrough */ + + case AML_IF_OP: + + /* + * IF/WHILE: Create a new control state to manage these + * constructs. We need to manage these as a stack, in order + * to handle nesting. + */ + control_state = acpi_ut_create_control_state(); + if (!control_state) { + status = AE_NO_MEMORY; + break; + } + /* + * Save a pointer to the predicate for multiple executions + * of a loop + */ + control_state->control.aml_predicate_start = + walk_state->parser_state.aml - 1; + control_state->control.package_end = + walk_state->parser_state.pkg_end; + control_state->control.opcode = op->common.aml_opcode; + + /* Push the control state on this walk's control stack */ + + acpi_ut_push_generic_state(&walk_state->control_state, + control_state); + break; + + case AML_ELSE_OP: + + /* Predicate is in the state object */ + /* If predicate is true, the IF was executed, ignore ELSE part */ + + if (walk_state->last_predicate) { + status = AE_CTRL_TRUE; + } + + break; + + case AML_RETURN_OP: + + break; + + default: + break; + } + + return (status); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ds_exec_end_control_op + * + * PARAMETERS: walk_list - The list that owns the walk stack + * Op - The control Op + * + * RETURN: Status + * + * DESCRIPTION: Handles all control ops encountered during control method + * execution. + * + ******************************************************************************/ + +acpi_status +acpi_ds_exec_end_control_op(struct acpi_walk_state * walk_state, + union acpi_parse_object * op) +{ + acpi_status status = AE_OK; + union acpi_generic_state *control_state; + + ACPI_FUNCTION_NAME(ds_exec_end_control_op); + + switch (op->common.aml_opcode) { + case AML_IF_OP: + + ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "[IF_OP] Op=%p\n", op)); + + /* + * Save the result of the predicate in case there is an + * ELSE to come + */ + walk_state->last_predicate = + (u8) walk_state->control_state->common.value; + + /* + * Pop the control state that was created at the start + * of the IF and free it + */ + control_state = + acpi_ut_pop_generic_state(&walk_state->control_state); + acpi_ut_delete_generic_state(control_state); + break; + + case AML_ELSE_OP: + + break; + + case AML_WHILE_OP: + + ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "[WHILE_OP] Op=%p\n", op)); + + control_state = walk_state->control_state; + if (control_state->common.value) { + + /* Predicate was true, the body of the loop was just executed */ + + /* + * This loop counter mechanism allows the interpreter to escape + * possibly infinite loops. This can occur in poorly written AML + * when the hardware does not respond within a while loop and the + * loop does not implement a timeout. + */ + control_state->control.loop_count++; + if (control_state->control.loop_count > + ACPI_MAX_LOOP_ITERATIONS) { + status = AE_AML_INFINITE_LOOP; + break; + } + + /* + * Go back and evaluate the predicate and maybe execute the loop + * another time + */ + status = AE_CTRL_PENDING; + walk_state->aml_last_while = + control_state->control.aml_predicate_start; + break; + } + + /* Predicate was false, terminate this while loop */ + + ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, + "[WHILE_OP] termination! Op=%p\n", op)); + + /* Pop this control state and free it */ + + control_state = + acpi_ut_pop_generic_state(&walk_state->control_state); + acpi_ut_delete_generic_state(control_state); + break; + + case AML_RETURN_OP: + + ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, + "[RETURN_OP] Op=%p Arg=%p\n", op, + op->common.value.arg)); + + /* + * One optional operand -- the return value + * It can be either an immediate operand or a result that + * has been bubbled up the tree + */ + if (op->common.value.arg) { + + /* Since we have a real Return(), delete any implicit return */ + + acpi_ds_clear_implicit_return(walk_state); + + /* Return statement has an immediate operand */ + + status = + acpi_ds_create_operands(walk_state, + op->common.value.arg); + if (ACPI_FAILURE(status)) { + return (status); + } + + /* + * If value being returned is a Reference (such as + * an arg or local), resolve it now because it may + * cease to exist at the end of the method. + */ + status = + acpi_ex_resolve_to_value(&walk_state->operands[0], + walk_state); + if (ACPI_FAILURE(status)) { + return (status); + } + + /* + * Get the return value and save as the last result + * value. This is the only place where walk_state->return_desc + * is set to anything other than zero! + */ + walk_state->return_desc = walk_state->operands[0]; + } else if (walk_state->result_count) { + + /* Since we have a real Return(), delete any implicit return */ + + acpi_ds_clear_implicit_return(walk_state); + + /* + * The return value has come from a previous calculation. + * + * If value being returned is a Reference (such as + * an arg or local), resolve it now because it may + * cease to exist at the end of the method. + * + * Allow references created by the Index operator to return unchanged. + */ + if ((ACPI_GET_DESCRIPTOR_TYPE + (walk_state->results->results.obj_desc[0]) == + ACPI_DESC_TYPE_OPERAND) + && + (ACPI_GET_OBJECT_TYPE + (walk_state->results->results.obj_desc[0]) == + ACPI_TYPE_LOCAL_REFERENCE) + && ((walk_state->results->results.obj_desc[0])-> + reference.class != ACPI_REFCLASS_INDEX)) { + status = + acpi_ex_resolve_to_value(&walk_state-> + results->results. + obj_desc[0], + walk_state); + if (ACPI_FAILURE(status)) { + return (status); + } + } + + walk_state->return_desc = + walk_state->results->results.obj_desc[0]; + } else { + /* No return operand */ + + if (walk_state->num_operands) { + acpi_ut_remove_reference(walk_state-> + operands[0]); + } + + walk_state->operands[0] = NULL; + walk_state->num_operands = 0; + walk_state->return_desc = NULL; + } + + ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, + "Completed RETURN_OP State=%p, RetVal=%p\n", + walk_state, walk_state->return_desc)); + + /* End the control method execution right now */ + + status = AE_CTRL_TERMINATE; + break; + + case AML_NOOP_OP: + + /* Just do nothing! */ + break; + + case AML_BREAK_POINT_OP: + + /* Call up to the OS service layer to handle this */ + + status = + acpi_os_signal(ACPI_SIGNAL_BREAKPOINT, + "Executed AML Breakpoint opcode"); + + /* If and when it returns, all done. */ + + break; + + case AML_BREAK_OP: + case AML_CONTINUE_OP: /* ACPI 2.0 */ + + /* Pop and delete control states until we find a while */ + + while (walk_state->control_state && + (walk_state->control_state->control.opcode != + AML_WHILE_OP)) { + control_state = + acpi_ut_pop_generic_state(&walk_state-> + control_state); + acpi_ut_delete_generic_state(control_state); + } + + /* No while found? */ + + if (!walk_state->control_state) { + return (AE_AML_NO_WHILE); + } + + /* Was: walk_state->aml_last_while = walk_state->control_state->Control.aml_predicate_start; */ + + walk_state->aml_last_while = + walk_state->control_state->control.package_end; + + /* Return status depending on opcode */ + + if (op->common.aml_opcode == AML_BREAK_OP) { + status = AE_CTRL_BREAK; + } else { + status = AE_CTRL_CONTINUE; + } + break; + + default: + + ACPI_ERROR((AE_INFO, "Unknown control opcode=%X Op=%p", + op->common.aml_opcode, op)); + + status = AE_AML_BAD_OPCODE; + break; + } + + return (status); +} |