diff options
Diffstat (limited to 'drivers/acpi/acpica/evregion.c')
| -rw-r--r-- | drivers/acpi/acpica/evregion.c | 584 |
1 files changed, 52 insertions, 532 deletions
diff --git a/drivers/acpi/acpica/evregion.c b/drivers/acpi/acpica/evregion.c index 0cc6a16fedc..6555e350fc1 100644 --- a/drivers/acpi/acpica/evregion.c +++ b/drivers/acpi/acpica/evregion.c @@ -1,11 +1,11 @@ /****************************************************************************** * - * Module Name: evregion - ACPI address_space (op_region) handler dispatch + * Module Name: evregion - Operation Region support * *****************************************************************************/ /* - * Copyright (C) 2000 - 2012, Intel Corp. + * Copyright (C) 2000 - 2013, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -50,10 +50,9 @@ #define _COMPONENT ACPI_EVENTS ACPI_MODULE_NAME("evregion") +extern u8 acpi_gbl_default_address_spaces[]; + /* Local prototypes */ -static u8 -acpi_ev_has_default_handler(struct acpi_namespace_node *node, - acpi_adr_space_type space_id); static void acpi_ev_orphan_ec_reg_method(void); @@ -61,135 +60,6 @@ static acpi_status acpi_ev_reg_run(acpi_handle obj_handle, u32 level, void *context, void **return_value); -static acpi_status -acpi_ev_install_handler(acpi_handle obj_handle, - u32 level, void *context, void **return_value); - -/* These are the address spaces that will get default handlers */ - -#define ACPI_NUM_DEFAULT_SPACES 4 - -static u8 acpi_gbl_default_address_spaces[ACPI_NUM_DEFAULT_SPACES] = { - ACPI_ADR_SPACE_SYSTEM_MEMORY, - ACPI_ADR_SPACE_SYSTEM_IO, - ACPI_ADR_SPACE_PCI_CONFIG, - ACPI_ADR_SPACE_DATA_TABLE -}; - -/******************************************************************************* - * - * FUNCTION: acpi_ev_install_region_handlers - * - * PARAMETERS: None - * - * RETURN: Status - * - * DESCRIPTION: Installs the core subsystem default address space handlers. - * - ******************************************************************************/ - -acpi_status acpi_ev_install_region_handlers(void) -{ - acpi_status status; - u32 i; - - ACPI_FUNCTION_TRACE(ev_install_region_handlers); - - status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - /* - * All address spaces (PCI Config, EC, SMBus) are scope dependent and - * registration must occur for a specific device. - * - * In the case of the system memory and IO address spaces there is - * currently no device associated with the address space. For these we - * use the root. - * - * We install the default PCI config space handler at the root so that - * this space is immediately available even though the we have not - * enumerated all the PCI Root Buses yet. This is to conform to the ACPI - * specification which states that the PCI config space must be always - * available -- even though we are nowhere near ready to find the PCI root - * buses at this point. - * - * NOTE: We ignore AE_ALREADY_EXISTS because this means that a handler - * has already been installed (via acpi_install_address_space_handler). - * Similar for AE_SAME_HANDLER. - */ - for (i = 0; i < ACPI_NUM_DEFAULT_SPACES; i++) { - status = acpi_ev_install_space_handler(acpi_gbl_root_node, - acpi_gbl_default_address_spaces - [i], - ACPI_DEFAULT_HANDLER, - NULL, NULL); - switch (status) { - case AE_OK: - case AE_SAME_HANDLER: - case AE_ALREADY_EXISTS: - - /* These exceptions are all OK */ - - status = AE_OK; - break; - - default: - - goto unlock_and_exit; - } - } - - unlock_and_exit: - (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE); - return_ACPI_STATUS(status); -} - -/******************************************************************************* - * - * FUNCTION: acpi_ev_has_default_handler - * - * PARAMETERS: node - Namespace node for the device - * space_id - The address space ID - * - * RETURN: TRUE if default handler is installed, FALSE otherwise - * - * DESCRIPTION: Check if the default handler is installed for the requested - * space ID. - * - ******************************************************************************/ - -static u8 -acpi_ev_has_default_handler(struct acpi_namespace_node *node, - acpi_adr_space_type space_id) -{ - union acpi_operand_object *obj_desc; - union acpi_operand_object *handler_obj; - - /* Must have an existing internal object */ - - obj_desc = acpi_ns_get_attached_object(node); - if (obj_desc) { - handler_obj = obj_desc->device.handler; - - /* Walk the linked list of handlers for this object */ - - while (handler_obj) { - if (handler_obj->address_space.space_id == space_id) { - if (handler_obj->address_space.handler_flags & - ACPI_ADDR_HANDLER_DEFAULT_INSTALLED) { - return (TRUE); - } - } - - handler_obj = handler_obj->address_space.next; - } - } - - return (FALSE); -} - /******************************************************************************* * * FUNCTION: acpi_ev_initialize_op_regions @@ -241,91 +111,6 @@ acpi_status acpi_ev_initialize_op_regions(void) /******************************************************************************* * - * FUNCTION: acpi_ev_execute_reg_method - * - * PARAMETERS: region_obj - Region object - * function - Passed to _REG: On (1) or Off (0) - * - * RETURN: Status - * - * DESCRIPTION: Execute _REG method for a region - * - ******************************************************************************/ - -acpi_status -acpi_ev_execute_reg_method(union acpi_operand_object *region_obj, u32 function) -{ - struct acpi_evaluate_info *info; - union acpi_operand_object *args[3]; - union acpi_operand_object *region_obj2; - acpi_status status; - - ACPI_FUNCTION_TRACE(ev_execute_reg_method); - - region_obj2 = acpi_ns_get_secondary_object(region_obj); - if (!region_obj2) { - return_ACPI_STATUS(AE_NOT_EXIST); - } - - if (region_obj2->extra.method_REG == NULL) { - return_ACPI_STATUS(AE_OK); - } - - /* Allocate and initialize the evaluation information block */ - - info = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_evaluate_info)); - if (!info) { - return_ACPI_STATUS(AE_NO_MEMORY); - } - - info->prefix_node = region_obj2->extra.method_REG; - info->pathname = NULL; - info->parameters = args; - info->flags = ACPI_IGNORE_RETURN_VALUE; - - /* - * The _REG method has two arguments: - * - * arg0 - Integer: - * Operation region space ID Same value as region_obj->Region.space_id - * - * arg1 - Integer: - * connection status 1 for connecting the handler, 0 for disconnecting - * the handler (Passed as a parameter) - */ - args[0] = - acpi_ut_create_integer_object((u64) region_obj->region.space_id); - if (!args[0]) { - status = AE_NO_MEMORY; - goto cleanup1; - } - - args[1] = acpi_ut_create_integer_object((u64) function); - if (!args[1]) { - status = AE_NO_MEMORY; - goto cleanup2; - } - - args[2] = NULL; /* Terminate list */ - - /* Execute the method, no return value */ - - ACPI_DEBUG_EXEC(acpi_ut_display_init_pathname - (ACPI_TYPE_METHOD, info->prefix_node, NULL)); - - status = acpi_ns_evaluate(info); - acpi_ut_remove_reference(args[1]); - - cleanup2: - acpi_ut_remove_reference(args[0]); - - cleanup1: - ACPI_FREE(info); - return_ACPI_STATUS(status); -} - -/******************************************************************************* - * * FUNCTION: acpi_ev_address_space_dispatch * * PARAMETERS: region_obj - Internal region object @@ -709,351 +494,86 @@ acpi_ev_attach_region(union acpi_operand_object *handler_obj, /******************************************************************************* * - * FUNCTION: acpi_ev_install_handler - * - * PARAMETERS: walk_namespace callback - * - * DESCRIPTION: This routine installs an address handler into objects that are - * of type Region or Device. - * - * If the Object is a Device, and the device has a handler of - * the same type then the search is terminated in that branch. - * - * This is because the existing handler is closer in proximity - * to any more regions than the one we are trying to install. - * - ******************************************************************************/ - -static acpi_status -acpi_ev_install_handler(acpi_handle obj_handle, - u32 level, void *context, void **return_value) -{ - union acpi_operand_object *handler_obj; - union acpi_operand_object *next_handler_obj; - union acpi_operand_object *obj_desc; - struct acpi_namespace_node *node; - acpi_status status; - - ACPI_FUNCTION_NAME(ev_install_handler); - - handler_obj = (union acpi_operand_object *)context; - - /* Parameter validation */ - - if (!handler_obj) { - return (AE_OK); - } - - /* Convert and validate the device handle */ - - node = acpi_ns_validate_handle(obj_handle); - if (!node) { - return (AE_BAD_PARAMETER); - } - - /* - * We only care about regions and objects that are allowed to have - * address space handlers - */ - if ((node->type != ACPI_TYPE_DEVICE) && - (node->type != ACPI_TYPE_REGION) && (node != acpi_gbl_root_node)) { - return (AE_OK); - } - - /* Check for an existing internal object */ - - obj_desc = acpi_ns_get_attached_object(node); - if (!obj_desc) { - - /* No object, just exit */ - - return (AE_OK); - } - - /* Devices are handled different than regions */ - - if (obj_desc->common.type == ACPI_TYPE_DEVICE) { - - /* Check if this Device already has a handler for this address space */ - - next_handler_obj = obj_desc->device.handler; - while (next_handler_obj) { - - /* Found a handler, is it for the same address space? */ - - if (next_handler_obj->address_space.space_id == - handler_obj->address_space.space_id) { - ACPI_DEBUG_PRINT((ACPI_DB_OPREGION, - "Found handler for region [%s] in device %p(%p) " - "handler %p\n", - acpi_ut_get_region_name - (handler_obj->address_space. - space_id), obj_desc, - next_handler_obj, - handler_obj)); - - /* - * Since the object we found it on was a device, then it - * means that someone has already installed a handler for - * the branch of the namespace from this device on. Just - * bail out telling the walk routine to not traverse this - * branch. This preserves the scoping rule for handlers. - */ - return (AE_CTRL_DEPTH); - } - - /* Walk the linked list of handlers attached to this device */ - - next_handler_obj = next_handler_obj->address_space.next; - } - - /* - * As long as the device didn't have a handler for this space we - * don't care about it. We just ignore it and proceed. - */ - return (AE_OK); - } - - /* Object is a Region */ - - if (obj_desc->region.space_id != handler_obj->address_space.space_id) { - - /* This region is for a different address space, just ignore it */ - - return (AE_OK); - } - - /* - * Now we have a region and it is for the handler's address space type. - * - * First disconnect region for any previous handler (if any) - */ - acpi_ev_detach_region(obj_desc, FALSE); - - /* Connect the region to the new handler */ - - status = acpi_ev_attach_region(handler_obj, obj_desc, FALSE); - return (status); -} - -/******************************************************************************* - * - * FUNCTION: acpi_ev_install_space_handler + * FUNCTION: acpi_ev_execute_reg_method * - * PARAMETERS: node - Namespace node for the device - * space_id - The address space ID - * handler - Address of the handler - * setup - Address of the setup function - * context - Value passed to the handler on each access + * PARAMETERS: region_obj - Region object + * function - Passed to _REG: On (1) or Off (0) * * RETURN: Status * - * DESCRIPTION: Install a handler for all op_regions of a given space_id. - * Assumes namespace is locked + * DESCRIPTION: Execute _REG method for a region * ******************************************************************************/ acpi_status -acpi_ev_install_space_handler(struct acpi_namespace_node * node, - acpi_adr_space_type space_id, - acpi_adr_space_handler handler, - acpi_adr_space_setup setup, void *context) +acpi_ev_execute_reg_method(union acpi_operand_object *region_obj, u32 function) { - union acpi_operand_object *obj_desc; - union acpi_operand_object *handler_obj; + struct acpi_evaluate_info *info; + union acpi_operand_object *args[3]; + union acpi_operand_object *region_obj2; acpi_status status; - acpi_object_type type; - u8 flags = 0; - ACPI_FUNCTION_TRACE(ev_install_space_handler); - - /* - * This registration is valid for only the types below and the root. This - * is where the default handlers get placed. - */ - if ((node->type != ACPI_TYPE_DEVICE) && - (node->type != ACPI_TYPE_PROCESSOR) && - (node->type != ACPI_TYPE_THERMAL) && (node != acpi_gbl_root_node)) { - status = AE_BAD_PARAMETER; - goto unlock_and_exit; - } + ACPI_FUNCTION_TRACE(ev_execute_reg_method); - if (handler == ACPI_DEFAULT_HANDLER) { - flags = ACPI_ADDR_HANDLER_DEFAULT_INSTALLED; - - switch (space_id) { - case ACPI_ADR_SPACE_SYSTEM_MEMORY: - handler = acpi_ex_system_memory_space_handler; - setup = acpi_ev_system_memory_region_setup; - break; - - case ACPI_ADR_SPACE_SYSTEM_IO: - handler = acpi_ex_system_io_space_handler; - setup = acpi_ev_io_space_region_setup; - break; - - case ACPI_ADR_SPACE_PCI_CONFIG: - handler = acpi_ex_pci_config_space_handler; - setup = acpi_ev_pci_config_region_setup; - break; - - case ACPI_ADR_SPACE_CMOS: - handler = acpi_ex_cmos_space_handler; - setup = acpi_ev_cmos_region_setup; - break; - - case ACPI_ADR_SPACE_PCI_BAR_TARGET: - handler = acpi_ex_pci_bar_space_handler; - setup = acpi_ev_pci_bar_region_setup; - break; - - case ACPI_ADR_SPACE_DATA_TABLE: - handler = acpi_ex_data_table_space_handler; - setup = NULL; - break; - - default: - status = AE_BAD_PARAMETER; - goto unlock_and_exit; - } + region_obj2 = acpi_ns_get_secondary_object(region_obj); + if (!region_obj2) { + return_ACPI_STATUS(AE_NOT_EXIST); } - /* If the caller hasn't specified a setup routine, use the default */ - - if (!setup) { - setup = acpi_ev_default_region_setup; + if (region_obj2->extra.method_REG == NULL) { + return_ACPI_STATUS(AE_OK); } - /* Check for an existing internal object */ - - obj_desc = acpi_ns_get_attached_object(node); - if (obj_desc) { - /* - * The attached device object already exists. Make sure the handler - * is not already installed. - */ - handler_obj = obj_desc->device.handler; - - /* Walk the handler list for this device */ - - while (handler_obj) { - - /* Same space_id indicates a handler already installed */ - - if (handler_obj->address_space.space_id == space_id) { - if (handler_obj->address_space.handler == - handler) { - /* - * It is (relatively) OK to attempt to install the SAME - * handler twice. This can easily happen with the - * PCI_Config space. - */ - status = AE_SAME_HANDLER; - goto unlock_and_exit; - } else { - /* A handler is already installed */ - - status = AE_ALREADY_EXISTS; - } - goto unlock_and_exit; - } - - /* Walk the linked list of handlers */ - - handler_obj = handler_obj->address_space.next; - } - } else { - ACPI_DEBUG_PRINT((ACPI_DB_OPREGION, - "Creating object on Device %p while installing handler\n", - node)); - - /* obj_desc does not exist, create one */ - - if (node->type == ACPI_TYPE_ANY) { - type = ACPI_TYPE_DEVICE; - } else { - type = node->type; - } - - obj_desc = acpi_ut_create_internal_object(type); - if (!obj_desc) { - status = AE_NO_MEMORY; - goto unlock_and_exit; - } - - /* Init new descriptor */ - - obj_desc->common.type = (u8) type; - - /* Attach the new object to the Node */ - - status = acpi_ns_attach_object(node, obj_desc, type); - - /* Remove local reference to the object */ - - acpi_ut_remove_reference(obj_desc); + /* Allocate and initialize the evaluation information block */ - if (ACPI_FAILURE(status)) { - goto unlock_and_exit; - } + info = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_evaluate_info)); + if (!info) { + return_ACPI_STATUS(AE_NO_MEMORY); } - ACPI_DEBUG_PRINT((ACPI_DB_OPREGION, - "Installing address handler for region %s(%X) on Device %4.4s %p(%p)\n", - acpi_ut_get_region_name(space_id), space_id, - acpi_ut_get_node_name(node), node, obj_desc)); + info->prefix_node = region_obj2->extra.method_REG; + info->pathname = NULL; + info->parameters = args; + info->flags = ACPI_IGNORE_RETURN_VALUE; /* - * Install the handler + * The _REG method has two arguments: + * + * arg0 - Integer: + * Operation region space ID Same value as region_obj->Region.space_id * - * At this point there is no existing handler. Just allocate the object - * for the handler and link it into the list. + * arg1 - Integer: + * connection status 1 for connecting the handler, 0 for disconnecting + * the handler (Passed as a parameter) */ - handler_obj = - acpi_ut_create_internal_object(ACPI_TYPE_LOCAL_ADDRESS_HANDLER); - if (!handler_obj) { + args[0] = + acpi_ut_create_integer_object((u64)region_obj->region.space_id); + if (!args[0]) { status = AE_NO_MEMORY; - goto unlock_and_exit; + goto cleanup1; } - /* Init handler obj */ + args[1] = acpi_ut_create_integer_object((u64)function); + if (!args[1]) { + status = AE_NO_MEMORY; + goto cleanup2; + } - handler_obj->address_space.space_id = (u8) space_id; - handler_obj->address_space.handler_flags = flags; - handler_obj->address_space.region_list = NULL; - handler_obj->address_space.node = node; - handler_obj->address_space.handler = handler; - handler_obj->address_space.context = context; - handler_obj->address_space.setup = setup; + args[2] = NULL; /* Terminate list */ - /* Install at head of Device.address_space list */ + /* Execute the method, no return value */ - handler_obj->address_space.next = obj_desc->device.handler; + ACPI_DEBUG_EXEC(acpi_ut_display_init_pathname + (ACPI_TYPE_METHOD, info->prefix_node, NULL)); - /* - * The Device object is the first reference on the handler_obj. - * Each region that uses the handler adds a reference. - */ - obj_desc->device.handler = handler_obj; + status = acpi_ns_evaluate(info); + acpi_ut_remove_reference(args[1]); - /* - * Walk the namespace finding all of the regions this - * handler will manage. - * - * Start at the device and search the branch toward - * the leaf nodes until either the leaf is encountered or - * a device is detected that has an address handler of the - * same type. - * - * In either case, back up and search down the remainder - * of the branch - */ - status = acpi_ns_walk_namespace(ACPI_TYPE_ANY, node, ACPI_UINT32_MAX, - ACPI_NS_WALK_UNLOCK, - acpi_ev_install_handler, NULL, - handler_obj, NULL); + cleanup2: + acpi_ut_remove_reference(args[0]); - unlock_and_exit: + cleanup1: + ACPI_FREE(info); return_ACPI_STATUS(status); } |