diff options
Diffstat (limited to 'drivers/acpi/acpica/hwsleep.c')
| -rw-r--r-- | drivers/acpi/acpica/hwsleep.c | 629 |
1 files changed, 629 insertions, 0 deletions
diff --git a/drivers/acpi/acpica/hwsleep.c b/drivers/acpi/acpica/hwsleep.c new file mode 100644 index 00000000000..a2af2a4f2f2 --- /dev/null +++ b/drivers/acpi/acpica/hwsleep.c @@ -0,0 +1,629 @@ + +/****************************************************************************** + * + * Name: hwsleep.c - ACPI Hardware Sleep/Wake Interface + * + *****************************************************************************/ + +/* + * Copyright (C) 2000 - 2008, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include <acpi/acpi.h> +#include "accommon.h" +#include "actables.h" + +#define _COMPONENT ACPI_HARDWARE +ACPI_MODULE_NAME("hwsleep") + +/******************************************************************************* + * + * FUNCTION: acpi_set_firmware_waking_vector + * + * PARAMETERS: physical_address - 32-bit physical address of ACPI real mode + * entry point. + * + * RETURN: Status + * + * DESCRIPTION: Sets the 32-bit firmware_waking_vector field of the FACS + * + ******************************************************************************/ +acpi_status +acpi_set_firmware_waking_vector(u32 physical_address) +{ + ACPI_FUNCTION_TRACE(acpi_set_firmware_waking_vector); + + + /* + * According to the ACPI specification 2.0c and later, the 64-bit + * waking vector should be cleared and the 32-bit waking vector should + * be used, unless we want the wake-up code to be called by the BIOS in + * Protected Mode. Some systems (for example HP dv5-1004nr) are known + * to fail to resume if the 64-bit vector is used. + */ + + /* Set the 32-bit vector */ + + acpi_gbl_FACS->firmware_waking_vector = physical_address; + + /* Clear the 64-bit vector if it exists */ + + if ((acpi_gbl_FACS->length > 32) && (acpi_gbl_FACS->version >= 1)) { + acpi_gbl_FACS->xfirmware_waking_vector = 0; + } + + return_ACPI_STATUS(AE_OK); +} + +ACPI_EXPORT_SYMBOL(acpi_set_firmware_waking_vector) + +/******************************************************************************* + * + * FUNCTION: acpi_set_firmware_waking_vector64 + * + * PARAMETERS: physical_address - 64-bit physical address of ACPI protected + * mode entry point. + * + * RETURN: Status + * + * DESCRIPTION: Sets the 64-bit X_firmware_waking_vector field of the FACS, if + * it exists in the table. + * + ******************************************************************************/ +acpi_status +acpi_set_firmware_waking_vector64(u64 physical_address) +{ + ACPI_FUNCTION_TRACE(acpi_set_firmware_waking_vector64); + + + /* Determine if the 64-bit vector actually exists */ + + if ((acpi_gbl_FACS->length <= 32) || (acpi_gbl_FACS->version < 1)) { + return_ACPI_STATUS(AE_NOT_EXIST); + } + + /* Clear 32-bit vector, set the 64-bit X_ vector */ + + acpi_gbl_FACS->firmware_waking_vector = 0; + acpi_gbl_FACS->xfirmware_waking_vector = physical_address; + + return_ACPI_STATUS(AE_OK); +} + +ACPI_EXPORT_SYMBOL(acpi_set_firmware_waking_vector64) + +/******************************************************************************* + * + * FUNCTION: acpi_enter_sleep_state_prep + * + * PARAMETERS: sleep_state - Which sleep state to enter + * + * RETURN: Status + * + * DESCRIPTION: Prepare to enter a system sleep state (see ACPI 2.0 spec p 231) + * This function must execute with interrupts enabled. + * We break sleeping into 2 stages so that OSPM can handle + * various OS-specific tasks between the two steps. + * + ******************************************************************************/ +acpi_status acpi_enter_sleep_state_prep(u8 sleep_state) +{ + acpi_status status; + struct acpi_object_list arg_list; + union acpi_object arg; + + ACPI_FUNCTION_TRACE(acpi_enter_sleep_state_prep); + + /* + * _PSW methods could be run here to enable wake-on keyboard, LAN, etc. + */ + status = acpi_get_sleep_type_data(sleep_state, + &acpi_gbl_sleep_type_a, + &acpi_gbl_sleep_type_b); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + /* Setup parameter object */ + + arg_list.count = 1; + arg_list.pointer = &arg; + + arg.type = ACPI_TYPE_INTEGER; + arg.integer.value = sleep_state; + + /* Run the _PTS method */ + + status = acpi_evaluate_object(NULL, METHOD_NAME__PTS, &arg_list, NULL); + if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { + return_ACPI_STATUS(status); + } + + /* Setup the argument to _SST */ + + switch (sleep_state) { + case ACPI_STATE_S0: + arg.integer.value = ACPI_SST_WORKING; + break; + + case ACPI_STATE_S1: + case ACPI_STATE_S2: + case ACPI_STATE_S3: + arg.integer.value = ACPI_SST_SLEEPING; + break; + + case ACPI_STATE_S4: + arg.integer.value = ACPI_SST_SLEEP_CONTEXT; + break; + + default: + arg.integer.value = ACPI_SST_INDICATOR_OFF; /* Default is off */ + break; + } + + /* + * Set the system indicators to show the desired sleep state. + * _SST is an optional method (return no error if not found) + */ + status = acpi_evaluate_object(NULL, METHOD_NAME__SST, &arg_list, NULL); + if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { + ACPI_EXCEPTION((AE_INFO, status, + "While executing method _SST")); + } + + return_ACPI_STATUS(AE_OK); +} + +ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_prep) + +/******************************************************************************* + * + * FUNCTION: acpi_enter_sleep_state + * + * PARAMETERS: sleep_state - Which sleep state to enter + * + * RETURN: Status + * + * DESCRIPTION: Enter a system sleep state (see ACPI 2.0 spec p 231) + * THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED + * + ******************************************************************************/ +acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state) +{ + u32 PM1Acontrol; + u32 PM1Bcontrol; + struct acpi_bit_register_info *sleep_type_reg_info; + struct acpi_bit_register_info *sleep_enable_reg_info; + u32 in_value; + struct acpi_object_list arg_list; + union acpi_object arg; + acpi_status status; + + ACPI_FUNCTION_TRACE(acpi_enter_sleep_state); + + if ((acpi_gbl_sleep_type_a > ACPI_SLEEP_TYPE_MAX) || + (acpi_gbl_sleep_type_b > ACPI_SLEEP_TYPE_MAX)) { + ACPI_ERROR((AE_INFO, "Sleep values out of range: A=%X B=%X", + acpi_gbl_sleep_type_a, acpi_gbl_sleep_type_b)); + return_ACPI_STATUS(AE_AML_OPERAND_VALUE); + } + + sleep_type_reg_info = + acpi_hw_get_bit_register_info(ACPI_BITREG_SLEEP_TYPE_A); + sleep_enable_reg_info = + acpi_hw_get_bit_register_info(ACPI_BITREG_SLEEP_ENABLE); + + /* Clear wake status */ + + status = acpi_set_register(ACPI_BITREG_WAKE_STATUS, 1); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + /* Clear all fixed and general purpose status bits */ + + status = acpi_hw_clear_acpi_status(); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + /* + * 1) Disable/Clear all GPEs + * 2) Enable all wakeup GPEs + */ + status = acpi_hw_disable_all_gpes(); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + acpi_gbl_system_awake_and_running = FALSE; + + status = acpi_hw_enable_all_wakeup_gpes(); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + /* Execute the _GTS method */ + + arg_list.count = 1; + arg_list.pointer = &arg; + arg.type = ACPI_TYPE_INTEGER; + arg.integer.value = sleep_state; + + status = acpi_evaluate_object(NULL, METHOD_NAME__GTS, &arg_list, NULL); + if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { + return_ACPI_STATUS(status); + } + + /* Get current value of PM1A control */ + + status = acpi_hw_register_read(ACPI_REGISTER_PM1_CONTROL, &PM1Acontrol); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + ACPI_DEBUG_PRINT((ACPI_DB_INIT, + "Entering sleep state [S%d]\n", sleep_state)); + + /* Clear SLP_EN and SLP_TYP fields */ + + PM1Acontrol &= ~(sleep_type_reg_info->access_bit_mask | + sleep_enable_reg_info->access_bit_mask); + PM1Bcontrol = PM1Acontrol; + + /* Insert SLP_TYP bits */ + + PM1Acontrol |= + (acpi_gbl_sleep_type_a << sleep_type_reg_info->bit_position); + PM1Bcontrol |= + (acpi_gbl_sleep_type_b << sleep_type_reg_info->bit_position); + + /* + * We split the writes of SLP_TYP and SLP_EN to workaround + * poorly implemented hardware. + */ + + /* Write #1: fill in SLP_TYP data */ + + status = acpi_hw_register_write(ACPI_REGISTER_PM1A_CONTROL, + PM1Acontrol); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + status = acpi_hw_register_write(ACPI_REGISTER_PM1B_CONTROL, + PM1Bcontrol); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + /* Insert SLP_ENABLE bit */ + + PM1Acontrol |= sleep_enable_reg_info->access_bit_mask; + PM1Bcontrol |= sleep_enable_reg_info->access_bit_mask; + + /* Write #2: SLP_TYP + SLP_EN */ + + ACPI_FLUSH_CPU_CACHE(); + + status = acpi_hw_register_write(ACPI_REGISTER_PM1A_CONTROL, + PM1Acontrol); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + status = acpi_hw_register_write(ACPI_REGISTER_PM1B_CONTROL, + PM1Bcontrol); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + if (sleep_state > ACPI_STATE_S3) { + /* + * We wanted to sleep > S3, but it didn't happen (by virtue of the + * fact that we are still executing!) + * + * Wait ten seconds, then try again. This is to get S4/S5 to work on + * all machines. + * + * We wait so long to allow chipsets that poll this reg very slowly to + * still read the right value. Ideally, this block would go + * away entirely. + */ + acpi_os_stall(10000000); + + status = acpi_hw_register_write(ACPI_REGISTER_PM1_CONTROL, + sleep_enable_reg_info-> + access_bit_mask); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + } + + /* Wait until we enter sleep state */ + + do { + status = acpi_get_register_unlocked(ACPI_BITREG_WAKE_STATUS, + &in_value); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + /* Spin until we wake */ + + } while (!in_value); + + return_ACPI_STATUS(AE_OK); +} + +ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state) + +/******************************************************************************* + * + * FUNCTION: acpi_enter_sleep_state_s4bios + * + * PARAMETERS: None + * + * RETURN: Status + * + * DESCRIPTION: Perform a S4 bios request. + * THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED + * + ******************************************************************************/ +acpi_status asmlinkage acpi_enter_sleep_state_s4bios(void) +{ + u32 in_value; + acpi_status status; + + ACPI_FUNCTION_TRACE(acpi_enter_sleep_state_s4bios); + + status = acpi_set_register(ACPI_BITREG_WAKE_STATUS, 1); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + status = acpi_hw_clear_acpi_status(); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + /* + * 1) Disable/Clear all GPEs + * 2) Enable all wakeup GPEs + */ + status = acpi_hw_disable_all_gpes(); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + acpi_gbl_system_awake_and_running = FALSE; + + status = acpi_hw_enable_all_wakeup_gpes(); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + ACPI_FLUSH_CPU_CACHE(); + + status = acpi_os_write_port(acpi_gbl_FADT.smi_command, + (u32) acpi_gbl_FADT.S4bios_request, 8); + + do { + acpi_os_stall(1000); + status = acpi_get_register(ACPI_BITREG_WAKE_STATUS, &in_value); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + } while (!in_value); + + return_ACPI_STATUS(AE_OK); +} + +ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_s4bios) + +/******************************************************************************* + * + * FUNCTION: acpi_leave_sleep_state_prep + * + * PARAMETERS: sleep_state - Which sleep state we are exiting + * + * RETURN: Status + * + * DESCRIPTION: Perform the first state of OS-independent ACPI cleanup after a + * sleep. + * Called with interrupts DISABLED. + * + ******************************************************************************/ +acpi_status acpi_leave_sleep_state_prep(u8 sleep_state) +{ + struct acpi_object_list arg_list; + union acpi_object arg; + acpi_status status; + struct acpi_bit_register_info *sleep_type_reg_info; + struct acpi_bit_register_info *sleep_enable_reg_info; + u32 PM1Acontrol; + u32 PM1Bcontrol; + + ACPI_FUNCTION_TRACE(acpi_leave_sleep_state_prep); + + /* + * Set SLP_TYPE and SLP_EN to state S0. + * This is unclear from the ACPI Spec, but it is required + * by some machines. + */ + status = acpi_get_sleep_type_data(ACPI_STATE_S0, + &acpi_gbl_sleep_type_a, + &acpi_gbl_sleep_type_b); + if (ACPI_SUCCESS(status)) { + sleep_type_reg_info = + acpi_hw_get_bit_register_info(ACPI_BITREG_SLEEP_TYPE_A); + sleep_enable_reg_info = + acpi_hw_get_bit_register_info(ACPI_BITREG_SLEEP_ENABLE); + + /* Get current value of PM1A control */ + + status = acpi_hw_register_read(ACPI_REGISTER_PM1_CONTROL, + &PM1Acontrol); + if (ACPI_SUCCESS(status)) { + + /* Clear SLP_EN and SLP_TYP fields */ + + PM1Acontrol &= ~(sleep_type_reg_info->access_bit_mask | + sleep_enable_reg_info-> + access_bit_mask); + PM1Bcontrol = PM1Acontrol; + + /* Insert SLP_TYP bits */ + + PM1Acontrol |= + (acpi_gbl_sleep_type_a << sleep_type_reg_info-> + bit_position); + PM1Bcontrol |= + (acpi_gbl_sleep_type_b << sleep_type_reg_info-> + bit_position); + + /* Just ignore any errors */ + + (void)acpi_hw_register_write(ACPI_REGISTER_PM1A_CONTROL, + PM1Acontrol); + (void)acpi_hw_register_write(ACPI_REGISTER_PM1B_CONTROL, + PM1Bcontrol); + } + } + + /* Execute the _BFS method */ + + arg_list.count = 1; + arg_list.pointer = &arg; + arg.type = ACPI_TYPE_INTEGER; + arg.integer.value = sleep_state; + + status = acpi_evaluate_object(NULL, METHOD_NAME__BFS, &arg_list, NULL); + if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { + ACPI_EXCEPTION((AE_INFO, status, "During Method _BFS")); + } + + return_ACPI_STATUS(status); +} + +/******************************************************************************* + * + * FUNCTION: acpi_leave_sleep_state + * + * PARAMETERS: sleep_state - Which sleep state we just exited + * + * RETURN: Status + * + * DESCRIPTION: Perform OS-independent ACPI cleanup after a sleep + * Called with interrupts ENABLED. + * + ******************************************************************************/ +acpi_status acpi_leave_sleep_state(u8 sleep_state) +{ + struct acpi_object_list arg_list; + union acpi_object arg; + acpi_status status; + + ACPI_FUNCTION_TRACE(acpi_leave_sleep_state); + + /* Ensure enter_sleep_state_prep -> enter_sleep_state ordering */ + + acpi_gbl_sleep_type_a = ACPI_SLEEP_TYPE_INVALID; + + /* Setup parameter object */ + + arg_list.count = 1; + arg_list.pointer = &arg; + arg.type = ACPI_TYPE_INTEGER; + + /* Ignore any errors from these methods */ + + arg.integer.value = ACPI_SST_WAKING; + status = acpi_evaluate_object(NULL, METHOD_NAME__SST, &arg_list, NULL); + if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { + ACPI_EXCEPTION((AE_INFO, status, "During Method _SST")); + } + + /* + * GPEs must be enabled before _WAK is called as GPEs + * might get fired there + * + * Restore the GPEs: + * 1) Disable/Clear all GPEs + * 2) Enable all runtime GPEs + */ + status = acpi_hw_disable_all_gpes(); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + status = acpi_hw_enable_all_runtime_gpes(); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + arg.integer.value = sleep_state; + status = acpi_evaluate_object(NULL, METHOD_NAME__WAK, &arg_list, NULL); + if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { + ACPI_EXCEPTION((AE_INFO, status, "During Method _WAK")); + } + /* TBD: _WAK "sometimes" returns stuff - do we want to look at it? */ + + /* + * Some BIOSes assume that WAK_STS will be cleared on resume and use + * it to determine whether the system is rebooting or resuming. Clear + * it for compatibility. + */ + acpi_set_register(ACPI_BITREG_WAKE_STATUS, 1); + + acpi_gbl_system_awake_and_running = TRUE; + + /* Enable power button */ + + (void) + acpi_set_register(acpi_gbl_fixed_event_info + [ACPI_EVENT_POWER_BUTTON].enable_register_id, 1); + + (void) + acpi_set_register(acpi_gbl_fixed_event_info + [ACPI_EVENT_POWER_BUTTON].status_register_id, 1); + + arg.integer.value = ACPI_SST_WORKING; + status = acpi_evaluate_object(NULL, METHOD_NAME__SST, &arg_list, NULL); + if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { + ACPI_EXCEPTION((AE_INFO, status, "During Method _SST")); + } + + return_ACPI_STATUS(status); +} + +ACPI_EXPORT_SYMBOL(acpi_leave_sleep_state) |