1 files changed, 206 insertions, 157 deletions

diff --git a/drivers/acpi/acpica/tbfadt.c b/drivers/acpi/acpica/tbfadt.c
index 3636e4f8fb7..71e655d14cb 100644
--- a/drivers/acpi/acpica/tbfadt.c
+++ b/drivers/acpi/acpica/tbfadt.c
@@ -57,6 +57,8 @@ static void acpi_tb_convert_fadt(void);
 
 static void acpi_tb_validate_fadt(void);
 
+static void acpi_tb_setup_fadt_registers(void);
+
 /* Table for conversion of FADT to common internal format and FADT validation */
 
 typedef struct acpi_fadt_info {
@@ -130,7 +132,38 @@ static struct acpi_fadt_info fadt_info_table[] = {
 	 ACPI_FADT_SEPARATE_LENGTH}
 };
 
-#define ACPI_FADT_INFO_ENTRIES        (sizeof (fadt_info_table) / sizeof (struct acpi_fadt_info))
+#define ACPI_FADT_INFO_ENTRIES \
+			(sizeof (fadt_info_table) / sizeof (struct acpi_fadt_info))
+
+/* Table used to split Event Blocks into separate status/enable registers */
+
+typedef struct acpi_fadt_pm_info {
+	struct acpi_generic_address *target;
+	u8 source;
+	u8 register_num;
+
+} acpi_fadt_pm_info;
+
+static struct acpi_fadt_pm_info fadt_pm_info_table[] = {
+	{&acpi_gbl_xpm1a_status,
+	 ACPI_FADT_OFFSET(xpm1a_event_block),
+	 0},
+
+	{&acpi_gbl_xpm1a_enable,
+	 ACPI_FADT_OFFSET(xpm1a_event_block),
+	 1},
+
+	{&acpi_gbl_xpm1b_status,
+	 ACPI_FADT_OFFSET(xpm1b_event_block),
+	 0},
+
+	{&acpi_gbl_xpm1b_enable,
+	 ACPI_FADT_OFFSET(xpm1b_event_block),
+	 1}
+};
+
+#define ACPI_FADT_PM_INFO_ENTRIES \
+			(sizeof (fadt_pm_info_table) / sizeof (struct acpi_fadt_pm_info))
 
 /*******************************************************************************
  *
@@ -172,7 +205,6 @@ acpi_tb_init_generic_address(struct acpi_generic_address *generic_address,
  * FUNCTION:    acpi_tb_parse_fadt
  *
  * PARAMETERS:  table_index         - Index for the FADT
- *              Flags               - Flags
  *
  * RETURN:      None
  *
@@ -181,7 +213,7 @@ acpi_tb_init_generic_address(struct acpi_generic_address *generic_address,
  *
  ******************************************************************************/
 
-void acpi_tb_parse_fadt(u32 table_index, u8 flags)
+void acpi_tb_parse_fadt(u32 table_index)
 {
 	u32 length;
 	struct acpi_table_header *table;
@@ -208,7 +240,7 @@ void acpi_tb_parse_fadt(u32 table_index, u8 flags)
 	 */
 	(void)acpi_tb_verify_checksum(table, length);
 
-	/* Obtain a local copy of the FADT in common ACPI 2.0+ format */
+	/* Create a local copy of the FADT in common ACPI 2.0+ format */
 
 	acpi_tb_create_local_fadt(table, length);
 
@@ -219,10 +251,10 @@ void acpi_tb_parse_fadt(u32 table_index, u8 flags)
 	/* Obtain the DSDT and FACS tables via their addresses within the FADT */
 
 	acpi_tb_install_table((acpi_physical_address) acpi_gbl_FADT.Xdsdt,
-			      flags, ACPI_SIG_DSDT, ACPI_TABLE_INDEX_DSDT);
+			      ACPI_SIG_DSDT, ACPI_TABLE_INDEX_DSDT);
 
 	acpi_tb_install_table((acpi_physical_address) acpi_gbl_FADT.Xfacs,
-			      flags, ACPI_SIG_FACS, ACPI_TABLE_INDEX_FACS);
+			      ACPI_SIG_FACS, ACPI_TABLE_INDEX_FACS);
 }
 
 /*******************************************************************************
@@ -266,11 +298,17 @@ void acpi_tb_create_local_fadt(struct acpi_table_header *table, u32 length)
 	ACPI_MEMCPY(&acpi_gbl_FADT, table,
 		    ACPI_MIN(length, sizeof(struct acpi_table_fadt)));
 
-	/*
-	 * 1) Convert the local copy of the FADT to the common internal format
-	 * 2) Validate some of the important values within the FADT
-	 */
+	/* Convert the local copy of the FADT to the common internal format */
+
 	acpi_tb_convert_fadt();
+
+	/* Validate FADT values now, before we make any changes */
+
+	acpi_tb_validate_fadt();
+
+	/* Initialize the global ACPI register structures */
+
+	acpi_tb_setup_fadt_registers();
 }
 
 /*******************************************************************************
@@ -282,31 +320,35 @@ void acpi_tb_create_local_fadt(struct acpi_table_header *table, u32 length)
  * RETURN:      None
  *
  * DESCRIPTION: Converts all versions of the FADT to a common internal format.
- *              Expand all 32-bit addresses to 64-bit.
+ *              Expand 32-bit addresses to 64-bit as necessary.
  *
  * NOTE:        acpi_gbl_FADT must be of size (struct acpi_table_fadt),
  *              and must contain a copy of the actual FADT.
  *
- * ACPICA will use the "X" fields of the FADT for all addresses.
+ * Notes on 64-bit register addresses:
+ *
+ * After this FADT conversion, later ACPICA code will only use the 64-bit "X"
+ * fields of the FADT for all ACPI register addresses.
  *
- * "X" fields are optional extensions to the original V1.0 fields. Even if
- * they are present in the structure, they can be optionally not used by
- * setting them to zero. Therefore, we must selectively expand V1.0 fields
- * if the corresponding X field is zero.
+ * The 64-bit "X" fields are optional extensions to the original 32-bit FADT
+ * V1.0 fields. Even if they are present in the FADT, they are optional and
+ * are unused if the BIOS sets them to zero. Therefore, we must copy/expand
+ * 32-bit V1.0 fields if the corresponding X field is zero.
  *
- * For ACPI 1.0 FADTs, all address fields are expanded to the corresponding
- * "X" fields.
+ * For ACPI 1.0 FADTs, all 32-bit address fields are expanded to the
+ * corresponding "X" fields in the internal FADT.
  *
- * For ACPI 2.0 FADTs, any "X" fields that are NULL are filled in by
- * expanding the corresponding ACPI 1.0 field.
+ * For ACPI 2.0+ FADTs, all valid (non-zero) 32-bit address fields are expanded
+ * to the corresponding 64-bit X fields. For compatibility with other ACPI
+ * implementations, we ignore the 64-bit field if the 32-bit field is valid,
+ * regardless of whether the host OS is 32-bit or 64-bit.
  *
  ******************************************************************************/
 
 static void acpi_tb_convert_fadt(void)
 {
-	u8 pm1_register_bit_width;
-	u8 pm1_register_byte_width;
-	struct acpi_generic_address *target64;
+	struct acpi_generic_address *address64;
+	u32 address32;
 	u32 i;
 
 	/* Update the local FADT table header length */
@@ -355,140 +397,56 @@ static void acpi_tb_convert_fadt(void)
 	 * Expand the ACPI 1.0 32-bit addresses to the ACPI 2.0 64-bit "X"
 	 * generic address structures as necessary. Later code will always use
 	 * the 64-bit address structures.
+	 *
+	 * March 2009:
+	 * We now always use the 32-bit address if it is valid (non-null). This
+	 * is not in accordance with the ACPI specification which states that
+	 * the 64-bit address supersedes the 32-bit version, but we do this for
+	 * compatibility with other ACPI implementations. Most notably, in the
+	 * case where both the 32 and 64 versions are non-null, we use the 32-bit
+	 * version. This is the only address that is guaranteed to have been
+	 * tested by the BIOS manufacturer.
 	 */
 	for (i = 0; i < ACPI_FADT_INFO_ENTRIES; i++) {
-		target64 =
-		    ACPI_ADD_PTR(struct acpi_generic_address, &acpi_gbl_FADT,
-				 fadt_info_table[i].address64);
+		address32 = *ACPI_ADD_PTR(u32,
+					  &acpi_gbl_FADT,
+					  fadt_info_table[i].address32);
 
-		/* Expand only if the 64-bit X target is null */
+		address64 = ACPI_ADD_PTR(struct acpi_generic_address,
+					 &acpi_gbl_FADT,
+					 fadt_info_table[i].address64);
 
-		if (!target64->address) {
+		/*
+		 * If both 32- and 64-bit addresses are valid (non-zero),
+		 * they must match.
+		 */
+		if (address64->address && address32 &&
+		    (address64->address != (u64) address32)) {
+			ACPI_ERROR((AE_INFO,
+				    "32/64X address mismatch in %s: %8.8X/%8.8X%8.8X, using 32",
+				    fadt_info_table[i].name, address32,
+				    ACPI_FORMAT_UINT64(address64->address)));
+		}
 
-			/* The space_id is always I/O for the 32-bit legacy address fields */
+		/* Always use 32-bit address if it is valid (non-null) */
 
-			acpi_tb_init_generic_address(target64,
+		if (address32) {
+			/*
+			 * Copy the 32-bit address to the 64-bit GAS structure. The
+			 * Space ID is always I/O for 32-bit legacy address fields
+			*/
+			acpi_tb_init_generic_address(address64,
 						     ACPI_ADR_SPACE_SYSTEM_IO,
 						     *ACPI_ADD_PTR(u8,
 								   &acpi_gbl_FADT,
 								   fadt_info_table
 								   [i].length),
-						     (u64) * ACPI_ADD_PTR(u32,
-									  &acpi_gbl_FADT,
-									  fadt_info_table
-									  [i].
-									  address32));
-		}
-	}
-
-	/* Validate FADT values now, before we make any changes */
-
-	acpi_tb_validate_fadt();
-
-	/*
-	 * Optionally check all register lengths against the default values and
-	 * update them if they are incorrect.
-	 */
-	if (acpi_gbl_use_default_register_widths) {
-		for (i = 0; i < ACPI_FADT_INFO_ENTRIES; i++) {
-			target64 =
-			    ACPI_ADD_PTR(struct acpi_generic_address,
-					 &acpi_gbl_FADT,
-					 fadt_info_table[i].address64);
-
-			/*
-			 * If a valid register (Address != 0) and the (default_length > 0)
-			 * (Not a GPE register), then check the width against the default.
-			 */
-			if ((target64->address) &&
-			    (fadt_info_table[i].default_length > 0) &&
-			    (fadt_info_table[i].default_length !=
-			     target64->bit_width)) {
-				ACPI_WARNING((AE_INFO,
-					      "Invalid length for %s: %d, using default %d",
-					      fadt_info_table[i].name,
-					      target64->bit_width,
-					      fadt_info_table[i].
-					      default_length));
-
-				/* Incorrect size, set width to the default */
-
-				target64->bit_width =
-				    fadt_info_table[i].default_length;
-			}
+						     address32);
 		}
 	}
-
-	/*
-	 * Get the length of the individual PM1 registers (enable and status).
-	 * Each register is defined to be (event block length / 2).
-	 */
-	pm1_register_bit_width =
-	    (u8)ACPI_DIV_2(acpi_gbl_FADT.xpm1a_event_block.bit_width);
-	pm1_register_byte_width = (u8)ACPI_DIV_8(pm1_register_bit_width);
-
-	/*
-	 * Adjust the lengths of the PM1 Event Blocks so that they can be used to
-	 * access the PM1 status register(s). Use (width / 2)
-	 */
-	acpi_gbl_FADT.xpm1a_event_block.bit_width = pm1_register_bit_width;
-	acpi_gbl_FADT.xpm1b_event_block.bit_width = pm1_register_bit_width;
-
-	/*
-	 * Calculate separate GAS structs for the PM1 Enable registers.
-	 * These addresses do not appear (directly) in the FADT, so it is
-	 * useful to calculate them once, here.
-	 *
-	 * The PM event blocks are split into two register blocks, first is the
-	 * PM Status Register block, followed immediately by the PM Enable
-	 * Register block. Each is of length (xpm1x_event_block.bit_width/2).
-	 *
-	 * On various systems the v2 fields (and particularly the bit widths)
-	 * cannot be relied upon, though. Hence resort to using the v1 length
-	 * here (and warn about the inconsistency).
-	 */
-	if (acpi_gbl_FADT.xpm1a_event_block.bit_width
-	    != acpi_gbl_FADT.pm1_event_length * 8)
-		printk(KERN_WARNING "FADT: "
-		       "X_PM1a_EVT_BLK.bit_width (%u) does not match"
-		       " PM1_EVT_LEN (%u)\n",
-		       acpi_gbl_FADT.xpm1a_event_block.bit_width,
-		       acpi_gbl_FADT.pm1_event_length);
-
-	/* The PM1A register block is required */
-
-	acpi_tb_init_generic_address(&acpi_gbl_xpm1a_enable,
-				     acpi_gbl_FADT.xpm1a_event_block.space_id,
-				     pm1_register_byte_width,
-				     (acpi_gbl_FADT.xpm1a_event_block.address +
-				      pm1_register_byte_width));
-	/* Don't forget to copy space_id of the GAS */
-	acpi_gbl_xpm1a_enable.space_id =
-	    acpi_gbl_FADT.xpm1a_event_block.space_id;
-
-	/* The PM1B register block is optional, ignore if not present */
-
-	if (acpi_gbl_FADT.xpm1b_event_block.address) {
-		if (acpi_gbl_FADT.xpm1b_event_block.bit_width
-		    != acpi_gbl_FADT.pm1_event_length * 8)
-			printk(KERN_WARNING "FADT: "
-			       "X_PM1b_EVT_BLK.bit_width (%u) does not match"
-			       " PM1_EVT_LEN (%u)\n",
-			       acpi_gbl_FADT.xpm1b_event_block.bit_width,
-			       acpi_gbl_FADT.pm1_event_length);
-		acpi_tb_init_generic_address(&acpi_gbl_xpm1b_enable,
-					     acpi_gbl_FADT.xpm1b_event_block.space_id,
-					     pm1_register_byte_width,
-					     (acpi_gbl_FADT.xpm1b_event_block.
-					      address + pm1_register_byte_width));
-		/* Don't forget to copy space_id of the GAS */
-		acpi_gbl_xpm1b_enable.space_id =
-		    acpi_gbl_FADT.xpm1b_event_block.space_id;
-
-	}
 }
 
-/******************************************************************************
+/*******************************************************************************
  *
  * FUNCTION:    acpi_tb_validate_fadt
  *
@@ -525,18 +483,22 @@ static void acpi_tb_validate_fadt(void)
 	    (acpi_gbl_FADT.Xfacs != (u64) acpi_gbl_FADT.facs)) {
 		ACPI_WARNING((AE_INFO,
 			      "32/64X FACS address mismatch in FADT - "
-			      "two FACS tables! %8.8X/%8.8X%8.8X",
+			      "%8.8X/%8.8X%8.8X, using 32",
 			      acpi_gbl_FADT.facs,
 			      ACPI_FORMAT_UINT64(acpi_gbl_FADT.Xfacs)));
+
+		acpi_gbl_FADT.Xfacs = (u64) acpi_gbl_FADT.facs;
 	}
 
 	if (acpi_gbl_FADT.dsdt &&
 	    (acpi_gbl_FADT.Xdsdt != (u64) acpi_gbl_FADT.dsdt)) {
 		ACPI_WARNING((AE_INFO,
 			      "32/64X DSDT address mismatch in FADT - "
-			      "two DSDT tables! %8.8X/%8.8X%8.8X",
+			      "%8.8X/%8.8X%8.8X, using 32",
 			      acpi_gbl_FADT.dsdt,
 			      ACPI_FORMAT_UINT64(acpi_gbl_FADT.Xdsdt)));
+
+		acpi_gbl_FADT.Xdsdt = (u64) acpi_gbl_FADT.dsdt;
 	}
 
 	/* Examine all of the 64-bit extended address fields (X fields) */
@@ -561,7 +523,8 @@ static void acpi_tb_validate_fadt(void)
 		 * For each extended field, check for length mismatch between the
 		 * legacy length field and the corresponding 64-bit X length field.
 		 */
-		if (address64 && (address64->bit_width != ACPI_MUL_8(length))) {
+		if (address64->address &&
+		    (address64->bit_width != ACPI_MUL_8(length))) {
 			ACPI_WARNING((AE_INFO,
 				      "32/64X length mismatch in %s: %d/%d",
 				      name, ACPI_MUL_8(length),
@@ -575,7 +538,8 @@ static void acpi_tb_validate_fadt(void)
 			 */
 			if (!address64->address || !length) {
 				ACPI_ERROR((AE_INFO,
-					    "Required field %s has zero address and/or length: %8.8X%8.8X/%X",
+					    "Required field %s has zero address and/or length:"
+					    " %8.8X%8.8X/%X",
 					    name,
 					    ACPI_FORMAT_UINT64(address64->
 							       address),
@@ -584,27 +548,112 @@ static void acpi_tb_validate_fadt(void)
 		} else if (fadt_info_table[i].type & ACPI_FADT_SEPARATE_LENGTH) {
 			/*
 			 * Field is optional (PM2Control, GPE0, GPE1) AND has its own
-			 * length field. If present, both the address and length must be valid.
+			 * length field. If present, both the address and length must
+			 * be valid.
 			 */
-			if ((address64->address && !length)
-			    || (!address64->address && length)) {
+			if ((address64->address && !length) ||
+			    (!address64->address && length)) {
 				ACPI_WARNING((AE_INFO,
-					      "Optional field %s has zero address or length: %8.8X%8.8X/%X",
+					      "Optional field %s has zero address or length: "
+					      "%8.8X%8.8X/%X",
 					      name,
 					      ACPI_FORMAT_UINT64(address64->
 								 address),
 					      length));
 			}
 		}
+	}
+}
 
-		/* If both 32- and 64-bit addresses are valid (non-zero), they must match */
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_tb_setup_fadt_registers
+ *
+ * PARAMETERS:  None, uses acpi_gbl_FADT.
+ *
+ * RETURN:      None
+ *
+ * DESCRIPTION: Initialize global ACPI PM1 register definitions. Optionally,
+ *              force FADT register definitions to their default lengths.
+ *
+ ******************************************************************************/
 
-		if (address64->address && *address32 &&
-		    (address64->address != (u64) * address32)) {
-			ACPI_ERROR((AE_INFO,
-				    "32/64X address mismatch in %s: %8.8X/%8.8X%8.8X, using 64X",
-				    name, *address32,
-				    ACPI_FORMAT_UINT64(address64->address)));
+static void acpi_tb_setup_fadt_registers(void)
+{
+	struct acpi_generic_address *target64;
+	struct acpi_generic_address *source64;
+	u8 pm1_register_byte_width;
+	u32 i;
+
+	/*
+	 * Optionally check all register lengths against the default values and
+	 * update them if they are incorrect.
+	 */
+	if (acpi_gbl_use_default_register_widths) {
+		for (i = 0; i < ACPI_FADT_INFO_ENTRIES; i++) {
+			target64 =
+			    ACPI_ADD_PTR(struct acpi_generic_address,
+					 &acpi_gbl_FADT,
+					 fadt_info_table[i].address64);
+
+			/*
+			 * If a valid register (Address != 0) and the (default_length > 0)
+			 * (Not a GPE register), then check the width against the default.
+			 */
+			if ((target64->address) &&
+			    (fadt_info_table[i].default_length > 0) &&
+			    (fadt_info_table[i].default_length !=
+			     target64->bit_width)) {
+				ACPI_WARNING((AE_INFO,
+					      "Invalid length for %s: %d, using default %d",
+					      fadt_info_table[i].name,
+					      target64->bit_width,
+					      fadt_info_table[i].
+					      default_length));
+
+				/* Incorrect size, set width to the default */
+
+				target64->bit_width =
+				    fadt_info_table[i].default_length;
+			}
+		}
+	}
+
+	/*
+	 * Get the length of the individual PM1 registers (enable and status).
+	 * Each register is defined to be (event block length / 2). Extra divide
+	 * by 8 converts bits to bytes.
+	 */
+	pm1_register_byte_width = (u8)
+	    ACPI_DIV_16(acpi_gbl_FADT.xpm1a_event_block.bit_width);
+
+	/*
+	 * Calculate separate GAS structs for the PM1x (A/B) Status and Enable
+	 * registers. These addresses do not appear (directly) in the FADT, so it
+	 * is useful to pre-calculate them from the PM1 Event Block definitions.
+	 *
+	 * The PM event blocks are split into two register blocks, first is the
+	 * PM Status Register block, followed immediately by the PM Enable
+	 * Register block. Each is of length (pm1_event_length/2)
+	 *
+	 * Note: The PM1A event block is required by the ACPI specification.
+	 * However, the PM1B event block is optional and is rarely, if ever,
+	 * used.
+	 */
+
+	for (i = 0; i < ACPI_FADT_PM_INFO_ENTRIES; i++) {
+		source64 =
+		    ACPI_ADD_PTR(struct acpi_generic_address, &acpi_gbl_FADT,
+				 fadt_pm_info_table[i].source);
+
+		if (source64->address) {
+			acpi_tb_init_generic_address(fadt_pm_info_table[i].
+						     target, source64->space_id,
+						     pm1_register_byte_width,
+						     source64->address +
+						     (fadt_pm_info_table[i].
+						      register_num *
+						      pm1_register_byte_width));
 		}
 	}
 }