summaryrefslogtreecommitdiffstats
path: root/drivers/acpi/acpica/utresrc.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/acpi/acpica/utresrc.c')
-rw-r--r--drivers/acpi/acpica/utresrc.c278
1 files changed, 243 insertions, 35 deletions
diff --git a/drivers/acpi/acpica/utresrc.c b/drivers/acpi/acpica/utresrc.c
index 6ffd3a8bdaa..9d441ea7030 100644
--- a/drivers/acpi/acpica/utresrc.c
+++ b/drivers/acpi/acpica/utresrc.c
@@ -5,7 +5,7 @@
******************************************************************************/
/*
- * Copyright (C) 2000 - 2011, Intel Corp.
+ * Copyright (C) 2000 - 2012, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -43,7 +43,7 @@
#include <acpi/acpi.h>
#include "accommon.h"
-#include "amlresrc.h"
+#include "acresrc.h"
#define _COMPONENT ACPI_UTILITIES
ACPI_MODULE_NAME("utresrc")
@@ -154,6 +154,138 @@ const char *acpi_gbl_typ_decode[] = {
"TypeF"
};
+const char *acpi_gbl_ppc_decode[] = {
+ "PullDefault",
+ "PullUp",
+ "PullDown",
+ "PullNone"
+};
+
+const char *acpi_gbl_ior_decode[] = {
+ "IoRestrictionNone",
+ "IoRestrictionInputOnly",
+ "IoRestrictionOutputOnly",
+ "IoRestrictionNoneAndPreserve"
+};
+
+const char *acpi_gbl_dts_decode[] = {
+ "Width8bit",
+ "Width16bit",
+ "Width32bit",
+ "Width64bit",
+ "Width128bit",
+ "Width256bit",
+};
+
+/* GPIO connection type */
+
+const char *acpi_gbl_ct_decode[] = {
+ "Interrupt",
+ "I/O"
+};
+
+/* Serial bus type */
+
+const char *acpi_gbl_sbt_decode[] = {
+ "/* UNKNOWN serial bus type */",
+ "I2C",
+ "SPI",
+ "UART"
+};
+
+/* I2C serial bus access mode */
+
+const char *acpi_gbl_am_decode[] = {
+ "AddressingMode7Bit",
+ "AddressingMode10Bit"
+};
+
+/* I2C serial bus slave mode */
+
+const char *acpi_gbl_sm_decode[] = {
+ "ControllerInitiated",
+ "DeviceInitiated"
+};
+
+/* SPI serial bus wire mode */
+
+const char *acpi_gbl_wm_decode[] = {
+ "FourWireMode",
+ "ThreeWireMode"
+};
+
+/* SPI serial clock phase */
+
+const char *acpi_gbl_cph_decode[] = {
+ "ClockPhaseFirst",
+ "ClockPhaseSecond"
+};
+
+/* SPI serial bus clock polarity */
+
+const char *acpi_gbl_cpo_decode[] = {
+ "ClockPolarityLow",
+ "ClockPolarityHigh"
+};
+
+/* SPI serial bus device polarity */
+
+const char *acpi_gbl_dp_decode[] = {
+ "PolarityLow",
+ "PolarityHigh"
+};
+
+/* UART serial bus endian */
+
+const char *acpi_gbl_ed_decode[] = {
+ "LittleEndian",
+ "BigEndian"
+};
+
+/* UART serial bus bits per byte */
+
+const char *acpi_gbl_bpb_decode[] = {
+ "DataBitsFive",
+ "DataBitsSix",
+ "DataBitsSeven",
+ "DataBitsEight",
+ "DataBitsNine",
+ "/* UNKNOWN Bits per byte */",
+ "/* UNKNOWN Bits per byte */",
+ "/* UNKNOWN Bits per byte */"
+};
+
+/* UART serial bus stop bits */
+
+const char *acpi_gbl_sb_decode[] = {
+ "StopBitsNone",
+ "StopBitsOne",
+ "StopBitsOnePlusHalf",
+ "StopBitsTwo"
+};
+
+/* UART serial bus flow control */
+
+const char *acpi_gbl_fc_decode[] = {
+ "FlowControlNone",
+ "FlowControlHardware",
+ "FlowControlXON",
+ "/* UNKNOWN flow control keyword */"
+};
+
+/* UART serial bus parity type */
+
+const char *acpi_gbl_pt_decode[] = {
+ "ParityTypeNone",
+ "ParityTypeEven",
+ "ParityTypeOdd",
+ "ParityTypeMark",
+ "ParityTypeSpace",
+ "/* UNKNOWN parity keyword */",
+ "/* UNKNOWN parity keyword */",
+ "/* UNKNOWN parity keyword */"
+};
+
#endif
/*
@@ -173,7 +305,7 @@ const u8 acpi_gbl_resource_aml_sizes[] = {
ACPI_AML_SIZE_SMALL(struct aml_resource_end_dependent),
ACPI_AML_SIZE_SMALL(struct aml_resource_io),
ACPI_AML_SIZE_SMALL(struct aml_resource_fixed_io),
- 0,
+ ACPI_AML_SIZE_SMALL(struct aml_resource_fixed_dma),
0,
0,
0,
@@ -193,7 +325,17 @@ const u8 acpi_gbl_resource_aml_sizes[] = {
ACPI_AML_SIZE_LARGE(struct aml_resource_address16),
ACPI_AML_SIZE_LARGE(struct aml_resource_extended_irq),
ACPI_AML_SIZE_LARGE(struct aml_resource_address64),
- ACPI_AML_SIZE_LARGE(struct aml_resource_extended_address64)
+ ACPI_AML_SIZE_LARGE(struct aml_resource_extended_address64),
+ ACPI_AML_SIZE_LARGE(struct aml_resource_gpio),
+ 0,
+ ACPI_AML_SIZE_LARGE(struct aml_resource_common_serialbus),
+};
+
+const u8 acpi_gbl_resource_aml_serial_bus_sizes[] = {
+ 0,
+ ACPI_AML_SIZE_LARGE(struct aml_resource_i2c_serialbus),
+ ACPI_AML_SIZE_LARGE(struct aml_resource_spi_serialbus),
+ ACPI_AML_SIZE_LARGE(struct aml_resource_uart_serialbus),
};
/*
@@ -209,35 +351,49 @@ static const u8 acpi_gbl_resource_types[] = {
0,
0,
0,
- ACPI_SMALL_VARIABLE_LENGTH,
- ACPI_FIXED_LENGTH,
- ACPI_SMALL_VARIABLE_LENGTH,
- ACPI_FIXED_LENGTH,
- ACPI_FIXED_LENGTH,
- ACPI_FIXED_LENGTH,
- 0,
+ ACPI_SMALL_VARIABLE_LENGTH, /* 04 IRQ */
+ ACPI_FIXED_LENGTH, /* 05 DMA */
+ ACPI_SMALL_VARIABLE_LENGTH, /* 06 start_dependent_functions */
+ ACPI_FIXED_LENGTH, /* 07 end_dependent_functions */
+ ACPI_FIXED_LENGTH, /* 08 IO */
+ ACPI_FIXED_LENGTH, /* 09 fixed_iO */
+ ACPI_FIXED_LENGTH, /* 0_a fixed_dMA */
0,
0,
0,
- ACPI_VARIABLE_LENGTH,
- ACPI_FIXED_LENGTH,
+ ACPI_VARIABLE_LENGTH, /* 0_e vendor_short */
+ ACPI_FIXED_LENGTH, /* 0_f end_tag */
/* Large descriptors */
0,
- ACPI_FIXED_LENGTH,
- ACPI_FIXED_LENGTH,
+ ACPI_FIXED_LENGTH, /* 01 Memory24 */
+ ACPI_FIXED_LENGTH, /* 02 generic_register */
0,
- ACPI_VARIABLE_LENGTH,
- ACPI_FIXED_LENGTH,
- ACPI_FIXED_LENGTH,
- ACPI_VARIABLE_LENGTH,
- ACPI_VARIABLE_LENGTH,
- ACPI_VARIABLE_LENGTH,
- ACPI_VARIABLE_LENGTH,
- ACPI_FIXED_LENGTH
+ ACPI_VARIABLE_LENGTH, /* 04 vendor_long */
+ ACPI_FIXED_LENGTH, /* 05 Memory32 */
+ ACPI_FIXED_LENGTH, /* 06 memory32_fixed */
+ ACPI_VARIABLE_LENGTH, /* 07 Dword* address */
+ ACPI_VARIABLE_LENGTH, /* 08 Word* address */
+ ACPI_VARIABLE_LENGTH, /* 09 extended_iRQ */
+ ACPI_VARIABLE_LENGTH, /* 0_a Qword* address */
+ ACPI_FIXED_LENGTH, /* 0_b Extended* address */
+ ACPI_VARIABLE_LENGTH, /* 0_c Gpio* */
+ 0,
+ ACPI_VARIABLE_LENGTH /* 0_e *serial_bus */
};
+/*
+ * For the i_aSL compiler/disassembler, we don't want any error messages
+ * because the disassembler uses the resource validation code to determine
+ * if Buffer objects are actually Resource Templates.
+ */
+#ifdef ACPI_ASL_COMPILER
+#define ACPI_RESOURCE_ERROR(plist)
+#else
+#define ACPI_RESOURCE_ERROR(plist) ACPI_ERROR(plist)
+#endif
+
/*******************************************************************************
*
* FUNCTION: acpi_ut_walk_aml_resources
@@ -265,6 +421,7 @@ acpi_ut_walk_aml_resources(u8 * aml,
u8 resource_index;
u32 length;
u32 offset = 0;
+ u8 end_tag[2] = { 0x79, 0x00 };
ACPI_FUNCTION_TRACE(ut_walk_aml_resources);
@@ -286,6 +443,10 @@ acpi_ut_walk_aml_resources(u8 * aml,
status = acpi_ut_validate_resource(aml, &resource_index);
if (ACPI_FAILURE(status)) {
+ /*
+ * Exit on failure. Cannot continue because the descriptor length
+ * may be bogus also.
+ */
return_ACPI_STATUS(status);
}
@@ -300,7 +461,7 @@ acpi_ut_walk_aml_resources(u8 * aml,
user_function(aml, length, offset, resource_index,
context);
if (ACPI_FAILURE(status)) {
- return (status);
+ return_ACPI_STATUS(status);
}
}
@@ -333,7 +494,19 @@ acpi_ut_walk_aml_resources(u8 * aml,
/* Did not find an end_tag descriptor */
- return (AE_AML_NO_RESOURCE_END_TAG);
+ if (user_function) {
+
+ /* Insert an end_tag anyway. acpi_rs_get_list_length always leaves room */
+
+ (void)acpi_ut_validate_resource(end_tag, &resource_index);
+ status =
+ user_function(end_tag, 2, offset, resource_index, context);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+ }
+
+ return_ACPI_STATUS(AE_AML_NO_RESOURCE_END_TAG);
}
/*******************************************************************************
@@ -354,6 +527,7 @@ acpi_ut_walk_aml_resources(u8 * aml,
acpi_status acpi_ut_validate_resource(void *aml, u8 * return_index)
{
+ union aml_resource *aml_resource;
u8 resource_type;
u8 resource_index;
acpi_rs_length resource_length;
@@ -375,7 +549,7 @@ acpi_status acpi_ut_validate_resource(void *aml, u8 * return_index)
/* Verify the large resource type (name) against the max */
if (resource_type > ACPI_RESOURCE_NAME_LARGE_MAX) {
- return (AE_AML_INVALID_RESOURCE_TYPE);
+ goto invalid_resource;
}
/*
@@ -392,15 +566,17 @@ acpi_status acpi_ut_validate_resource(void *aml, u8 * return_index)
((resource_type & ACPI_RESOURCE_NAME_SMALL_MASK) >> 3);
}
- /* Check validity of the resource type, zero indicates name is invalid */
-
+ /*
+ * Check validity of the resource type, via acpi_gbl_resource_types. Zero
+ * indicates an invalid resource.
+ */
if (!acpi_gbl_resource_types[resource_index]) {
- return (AE_AML_INVALID_RESOURCE_TYPE);
+ goto invalid_resource;
}
/*
- * 2) Validate the resource_length field. This ensures that the length
- * is at least reasonable, and guarantees that it is non-zero.
+ * Validate the resource_length field. This ensures that the length
+ * is at least reasonable, and guarantees that it is non-zero.
*/
resource_length = acpi_ut_get_resource_length(aml);
minimum_resource_length = acpi_gbl_resource_aml_sizes[resource_index];
@@ -413,7 +589,7 @@ acpi_status acpi_ut_validate_resource(void *aml, u8 * return_index)
/* Fixed length resource, length must match exactly */
if (resource_length != minimum_resource_length) {
- return (AE_AML_BAD_RESOURCE_LENGTH);
+ goto bad_resource_length;
}
break;
@@ -422,7 +598,7 @@ acpi_status acpi_ut_validate_resource(void *aml, u8 * return_index)
/* Variable length resource, length must be at least the minimum */
if (resource_length < minimum_resource_length) {
- return (AE_AML_BAD_RESOURCE_LENGTH);
+ goto bad_resource_length;
}
break;
@@ -432,7 +608,7 @@ acpi_status acpi_ut_validate_resource(void *aml, u8 * return_index)
if ((resource_length > minimum_resource_length) ||
(resource_length < (minimum_resource_length - 1))) {
- return (AE_AML_BAD_RESOURCE_LENGTH);
+ goto bad_resource_length;
}
break;
@@ -440,7 +616,23 @@ acpi_status acpi_ut_validate_resource(void *aml, u8 * return_index)
/* Shouldn't happen (because of validation earlier), but be sure */
- return (AE_AML_INVALID_RESOURCE_TYPE);
+ goto invalid_resource;
+ }
+
+ aml_resource = ACPI_CAST_PTR(union aml_resource, aml);
+ if (resource_type == ACPI_RESOURCE_NAME_SERIAL_BUS) {
+
+ /* Validate the bus_type field */
+
+ if ((aml_resource->common_serial_bus.type == 0) ||
+ (aml_resource->common_serial_bus.type >
+ AML_RESOURCE_MAX_SERIALBUSTYPE)) {
+ ACPI_RESOURCE_ERROR((AE_INFO,
+ "Invalid/unsupported SerialBus resource descriptor: BusType 0x%2.2X",
+ aml_resource->common_serial_bus.
+ type));
+ return (AE_AML_INVALID_RESOURCE_TYPE);
+ }
}
/* Optionally return the resource table index */
@@ -450,6 +642,22 @@ acpi_status acpi_ut_validate_resource(void *aml, u8 * return_index)
}
return (AE_OK);
+
+ invalid_resource:
+
+ ACPI_RESOURCE_ERROR((AE_INFO,
+ "Invalid/unsupported resource descriptor: Type 0x%2.2X",
+ resource_type));
+ return (AE_AML_INVALID_RESOURCE_TYPE);
+
+ bad_resource_length:
+
+ ACPI_RESOURCE_ERROR((AE_INFO,
+ "Invalid resource descriptor length: Type "
+ "0x%2.2X, Length 0x%4.4X, MinLength 0x%4.4X",
+ resource_type, resource_length,
+ minimum_resource_length));
+ return (AE_AML_BAD_RESOURCE_LENGTH);
}
/*******************************************************************************