diff options
Diffstat (limited to 'drivers/acpi/acpica')
| -rw-r--r-- | drivers/acpi/acpica/Makefile | 1 | ||||
| -rw-r--r-- | drivers/acpi/acpica/achware.h | 3 | ||||
| -rw-r--r-- | drivers/acpi/acpica/aclocal.h | 23 | ||||
| -rw-r--r-- | drivers/acpi/acpica/acmacros.h | 29 | ||||
| -rw-r--r-- | drivers/acpi/acpica/dswload.c | 14 | ||||
| -rw-r--r-- | drivers/acpi/acpica/dswload2.c | 14 | ||||
| -rw-r--r-- | drivers/acpi/acpica/evgpe.c | 24 | ||||
| -rw-r--r-- | drivers/acpi/acpica/evxfgpe.c | 3 | ||||
| -rw-r--r-- | drivers/acpi/acpica/hwgpe.c | 15 | ||||
| -rw-r--r-- | drivers/acpi/acpica/hwxfsleep.c | 1 | ||||
| -rw-r--r-- | drivers/acpi/acpica/nsdump.c | 2 | ||||
| -rw-r--r-- | drivers/acpi/acpica/tbinstal.c | 20 | ||||
| -rw-r--r-- | drivers/acpi/acpica/tbxface.c | 41 | ||||
| -rw-r--r-- | drivers/acpi/acpica/utosi.c | 1 | ||||
| -rw-r--r-- | drivers/acpi/acpica/utxface.c | 354 | ||||
| -rw-r--r-- | drivers/acpi/acpica/utxfinit.c | 317 |
16 files changed, 521 insertions, 341 deletions
diff --git a/drivers/acpi/acpica/Makefile b/drivers/acpi/acpica/Makefile index 0a1b3435f92..7f1d40797e8 100644 --- a/drivers/acpi/acpica/Makefile +++ b/drivers/acpi/acpica/Makefile @@ -158,5 +158,6 @@ acpi-y += \ utresrc.o \ utstate.o \ utxface.o \ + utxfinit.o \ utxferror.o \ utxfmutex.o diff --git a/drivers/acpi/acpica/achware.h b/drivers/acpi/acpica/achware.h index 5de4ec72766..d902d31abc6 100644 --- a/drivers/acpi/acpica/achware.h +++ b/drivers/acpi/acpica/achware.h @@ -110,8 +110,7 @@ acpi_status acpi_hw_write_port(acpi_io_address address, u32 value, u32 width); /* * hwgpe - GPE support */ -u32 acpi_hw_get_gpe_register_bit(struct acpi_gpe_event_info *gpe_event_info, - struct acpi_gpe_register_info *gpe_register_info); +u32 acpi_hw_get_gpe_register_bit(struct acpi_gpe_event_info *gpe_event_info); acpi_status acpi_hw_low_set_gpe(struct acpi_gpe_event_info *gpe_event_info, u32 action); diff --git a/drivers/acpi/acpica/aclocal.h b/drivers/acpi/acpica/aclocal.h index cc80fe10e8e..c816ee67509 100644 --- a/drivers/acpi/acpica/aclocal.h +++ b/drivers/acpi/acpica/aclocal.h @@ -707,15 +707,18 @@ union acpi_parse_value { u8 disasm_opcode; /* Subtype used for disassembly */\ char aml_op_name[16]) /* Op name (debug only) */ -#define ACPI_DASM_BUFFER 0x00 -#define ACPI_DASM_RESOURCE 0x01 -#define ACPI_DASM_STRING 0x02 -#define ACPI_DASM_UNICODE 0x03 -#define ACPI_DASM_EISAID 0x04 -#define ACPI_DASM_MATCHOP 0x05 -#define ACPI_DASM_LNOT_PREFIX 0x06 -#define ACPI_DASM_LNOT_SUFFIX 0x07 -#define ACPI_DASM_IGNORE 0x08 +/* Flags for disasm_flags field above */ + +#define ACPI_DASM_BUFFER 0x00 /* Buffer is a simple data buffer */ +#define ACPI_DASM_RESOURCE 0x01 /* Buffer is a Resource Descriptor */ +#define ACPI_DASM_STRING 0x02 /* Buffer is a ASCII string */ +#define ACPI_DASM_UNICODE 0x03 /* Buffer is a Unicode string */ +#define ACPI_DASM_PLD_METHOD 0x04 /* Buffer is a _PLD method bit-packed buffer */ +#define ACPI_DASM_EISAID 0x05 /* Integer is an EISAID */ +#define ACPI_DASM_MATCHOP 0x06 /* Parent opcode is a Match() operator */ +#define ACPI_DASM_LNOT_PREFIX 0x07 /* Start of a Lnot_equal (etc.) pair of opcodes */ +#define ACPI_DASM_LNOT_SUFFIX 0x08 /* End of a Lnot_equal (etc.) pair of opcodes */ +#define ACPI_DASM_IGNORE 0x09 /* Not used at this time */ /* * Generic operation (for example: If, While, Store) @@ -932,6 +935,7 @@ struct acpi_bit_register_info { #define ACPI_OSI_WIN_VISTA_SP1 0x09 #define ACPI_OSI_WIN_VISTA_SP2 0x0A #define ACPI_OSI_WIN_7 0x0B +#define ACPI_OSI_WIN_8 0x0C #define ACPI_ALWAYS_ILLEGAL 0x00 @@ -1024,6 +1028,7 @@ struct acpi_port_info { ****************************************************************************/ struct acpi_db_method_info { + acpi_handle method; acpi_handle main_thread_gate; acpi_handle thread_complete_gate; acpi_thread_id *threads; diff --git a/drivers/acpi/acpica/acmacros.h b/drivers/acpi/acpica/acmacros.h index 832b6198652..a7f68c47f51 100644 --- a/drivers/acpi/acpica/acmacros.h +++ b/drivers/acpi/acpica/acmacros.h @@ -277,10 +277,33 @@ /* Bitfields within ACPI registers */ -#define ACPI_REGISTER_PREPARE_BITS(val, pos, mask) ((val << pos) & mask) -#define ACPI_REGISTER_INSERT_VALUE(reg, pos, mask, val) reg = (reg & (~(mask))) | ACPI_REGISTER_PREPARE_BITS(val, pos, mask) +#define ACPI_REGISTER_PREPARE_BITS(val, pos, mask) \ + ((val << pos) & mask) -#define ACPI_INSERT_BITS(target, mask, source) target = ((target & (~(mask))) | (source & mask)) +#define ACPI_REGISTER_INSERT_VALUE(reg, pos, mask, val) \ + reg = (reg & (~(mask))) | ACPI_REGISTER_PREPARE_BITS(val, pos, mask) + +#define ACPI_INSERT_BITS(target, mask, source) \ + target = ((target & (~(mask))) | (source & mask)) + +/* Generic bitfield macros and masks */ + +#define ACPI_GET_BITS(source_ptr, position, mask) \ + ((*source_ptr >> position) & mask) + +#define ACPI_SET_BITS(target_ptr, position, mask, value) \ + (*target_ptr |= ((value & mask) << position)) + +#define ACPI_1BIT_MASK 0x00000001 +#define ACPI_2BIT_MASK 0x00000003 +#define ACPI_3BIT_MASK 0x00000007 +#define ACPI_4BIT_MASK 0x0000000F +#define ACPI_5BIT_MASK 0x0000001F +#define ACPI_6BIT_MASK 0x0000003F +#define ACPI_7BIT_MASK 0x0000007F +#define ACPI_8BIT_MASK 0x000000FF +#define ACPI_16BIT_MASK 0x0000FFFF +#define ACPI_24BIT_MASK 0x00FFFFFF /* * An object of type struct acpi_namespace_node can appear in some contexts diff --git a/drivers/acpi/acpica/dswload.c b/drivers/acpi/acpica/dswload.c index 552aa3a50c8..557510084c7 100644 --- a/drivers/acpi/acpica/dswload.c +++ b/drivers/acpi/acpica/dswload.c @@ -230,6 +230,20 @@ acpi_ds_load1_begin_op(struct acpi_walk_state * walk_state, walk_state->scope_info->common.value = ACPI_TYPE_ANY; break; + case ACPI_TYPE_METHOD: + + /* + * Allow scope change to root during execution of module-level + * code. Root is typed METHOD during this time. + */ + if ((node == acpi_gbl_root_node) && + (walk_state-> + parse_flags & ACPI_PARSE_MODULE_LEVEL)) { + break; + } + + /*lint -fallthrough */ + default: /* All other types are an error */ diff --git a/drivers/acpi/acpica/dswload2.c b/drivers/acpi/acpica/dswload2.c index ae714772476..89c0114210c 100644 --- a/drivers/acpi/acpica/dswload2.c +++ b/drivers/acpi/acpica/dswload2.c @@ -230,6 +230,20 @@ acpi_ds_load2_begin_op(struct acpi_walk_state *walk_state, walk_state->scope_info->common.value = ACPI_TYPE_ANY; break; + case ACPI_TYPE_METHOD: + + /* + * Allow scope change to root during execution of module-level + * code. Root is typed METHOD during this time. + */ + if ((node == acpi_gbl_root_node) && + (walk_state-> + parse_flags & ACPI_PARSE_MODULE_LEVEL)) { + break; + } + + /*lint -fallthrough */ + default: /* All other types are an error */ diff --git a/drivers/acpi/acpica/evgpe.c b/drivers/acpi/acpica/evgpe.c index afbd5cb391f..ef0193d74b5 100644 --- a/drivers/acpi/acpica/evgpe.c +++ b/drivers/acpi/acpica/evgpe.c @@ -80,8 +80,7 @@ acpi_ev_update_gpe_enable_mask(struct acpi_gpe_event_info *gpe_event_info) return_ACPI_STATUS(AE_NOT_EXIST); } - register_bit = acpi_hw_get_gpe_register_bit(gpe_event_info, - gpe_register_info); + register_bit = acpi_hw_get_gpe_register_bit(gpe_event_info); /* Clear the run bit up front */ @@ -379,6 +378,18 @@ u32 acpi_ev_gpe_detect(struct acpi_gpe_xrupt_info * gpe_xrupt_list) */ if (!(gpe_register_info->enable_for_run | gpe_register_info->enable_for_wake)) { + ACPI_DEBUG_PRINT((ACPI_DB_INTERRUPTS, + "Ignore disabled registers for GPE%02X-GPE%02X: " + "RunEnable=%02X, WakeEnable=%02X\n", + gpe_register_info-> + base_gpe_number, + gpe_register_info-> + base_gpe_number + + (ACPI_GPE_REGISTER_WIDTH - 1), + gpe_register_info-> + enable_for_run, + gpe_register_info-> + enable_for_wake)); continue; } @@ -401,9 +412,14 @@ u32 acpi_ev_gpe_detect(struct acpi_gpe_xrupt_info * gpe_xrupt_list) } ACPI_DEBUG_PRINT((ACPI_DB_INTERRUPTS, - "Read GPE Register at GPE%02X: Status=%02X, Enable=%02X\n", + "Read registers for GPE%02X-GPE%02X: Status=%02X, Enable=%02X, " + "RunEnable=%02X, WakeEnable=%02X\n", gpe_register_info->base_gpe_number, - status_reg, enable_reg)); + gpe_register_info->base_gpe_number + + (ACPI_GPE_REGISTER_WIDTH - 1), + status_reg, enable_reg, + gpe_register_info->enable_for_run, + gpe_register_info->enable_for_wake)); /* Check if there is anything active at all in this register */ diff --git a/drivers/acpi/acpica/evxfgpe.c b/drivers/acpi/acpica/evxfgpe.c index 6affbdb4b88..87c5f233226 100644 --- a/drivers/acpi/acpica/evxfgpe.c +++ b/drivers/acpi/acpica/evxfgpe.c @@ -357,8 +357,7 @@ acpi_status acpi_set_gpe_wake_mask(acpi_handle gpe_device, u32 gpe_number, u8 ac goto unlock_and_exit; } - register_bit = - acpi_hw_get_gpe_register_bit(gpe_event_info, gpe_register_info); + register_bit = acpi_hw_get_gpe_register_bit(gpe_event_info); /* Perform the action */ diff --git a/drivers/acpi/acpica/hwgpe.c b/drivers/acpi/acpica/hwgpe.c index 25bd28c4ae8..db4076580e2 100644 --- a/drivers/acpi/acpica/hwgpe.c +++ b/drivers/acpi/acpica/hwgpe.c @@ -60,7 +60,6 @@ acpi_hw_enable_wakeup_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info, * FUNCTION: acpi_hw_get_gpe_register_bit * * PARAMETERS: gpe_event_info - Info block for the GPE - * gpe_register_info - Info block for the GPE register * * RETURN: Register mask with a one in the GPE bit position * @@ -69,11 +68,10 @@ acpi_hw_enable_wakeup_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info, * ******************************************************************************/ -u32 acpi_hw_get_gpe_register_bit(struct acpi_gpe_event_info *gpe_event_info, - struct acpi_gpe_register_info *gpe_register_info) +u32 acpi_hw_get_gpe_register_bit(struct acpi_gpe_event_info *gpe_event_info) { return (u32)1 << (gpe_event_info->gpe_number - - gpe_register_info->base_gpe_number); + gpe_event_info->register_info->base_gpe_number); } /****************************************************************************** @@ -115,8 +113,7 @@ acpi_hw_low_set_gpe(struct acpi_gpe_event_info *gpe_event_info, u32 action) /* Set or clear just the bit that corresponds to this GPE */ - register_bit = acpi_hw_get_gpe_register_bit(gpe_event_info, - gpe_register_info); + register_bit = acpi_hw_get_gpe_register_bit(gpe_event_info); switch (action) { case ACPI_GPE_CONDITIONAL_ENABLE: @@ -178,8 +175,7 @@ acpi_status acpi_hw_clear_gpe(struct acpi_gpe_event_info * gpe_event_info) * Write a one to the appropriate bit in the status register to * clear this GPE. */ - register_bit = - acpi_hw_get_gpe_register_bit(gpe_event_info, gpe_register_info); + register_bit = acpi_hw_get_gpe_register_bit(gpe_event_info); status = acpi_hw_write(register_bit, &gpe_register_info->status_address); @@ -222,8 +218,7 @@ acpi_hw_get_gpe_status(struct acpi_gpe_event_info * gpe_event_info, /* Get the register bitmask for this GPE */ - register_bit = acpi_hw_get_gpe_register_bit(gpe_event_info, - gpe_register_info); + register_bit = acpi_hw_get_gpe_register_bit(gpe_event_info); /* GPE currently enabled? (enabled for runtime?) */ diff --git a/drivers/acpi/acpica/hwxfsleep.c b/drivers/acpi/acpica/hwxfsleep.c index 1f165a750ae..0ff1ecea5c3 100644 --- a/drivers/acpi/acpica/hwxfsleep.c +++ b/drivers/acpi/acpica/hwxfsleep.c @@ -381,7 +381,6 @@ ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state) * FUNCTION: acpi_leave_sleep_state_prep * * PARAMETERS: sleep_state - Which sleep state we are exiting - * flags - ACPI_EXECUTE_BFS to run optional method * * RETURN: Status * diff --git a/drivers/acpi/acpica/nsdump.c b/drivers/acpi/acpica/nsdump.c index 7ee4e6aeb0a..2526aaf945e 100644 --- a/drivers/acpi/acpica/nsdump.c +++ b/drivers/acpi/acpica/nsdump.c @@ -264,7 +264,7 @@ acpi_ns_dump_one_object(acpi_handle obj_handle, switch (type) { case ACPI_TYPE_PROCESSOR: - acpi_os_printf("ID %X Len %.4X Addr %p\n", + acpi_os_printf("ID %02X Len %02X Addr %p\n", obj_desc->processor.proc_id, obj_desc->processor.length, ACPI_CAST_PTR(void, diff --git a/drivers/acpi/acpica/tbinstal.c b/drivers/acpi/acpica/tbinstal.c index 74f97d74db1..70f9d787c82 100644 --- a/drivers/acpi/acpica/tbinstal.c +++ b/drivers/acpi/acpica/tbinstal.c @@ -350,6 +350,7 @@ struct acpi_table_header *acpi_tb_table_override(struct acpi_table_header acpi_status acpi_tb_resize_root_table_list(void) { struct acpi_table_desc *tables; + u32 table_count; ACPI_FUNCTION_TRACE(tb_resize_root_table_list); @@ -363,8 +364,13 @@ acpi_status acpi_tb_resize_root_table_list(void) /* Increase the Table Array size */ - tables = ACPI_ALLOCATE_ZEROED(((acpi_size) acpi_gbl_root_table_list. - max_table_count + + if (acpi_gbl_root_table_list.flags & ACPI_ROOT_ORIGIN_ALLOCATED) { + table_count = acpi_gbl_root_table_list.max_table_count; + } else { + table_count = acpi_gbl_root_table_list.current_table_count; + } + + tables = ACPI_ALLOCATE_ZEROED(((acpi_size) table_count + ACPI_ROOT_TABLE_SIZE_INCREMENT) * sizeof(struct acpi_table_desc)); if (!tables) { @@ -377,8 +383,8 @@ acpi_status acpi_tb_resize_root_table_list(void) if (acpi_gbl_root_table_list.tables) { ACPI_MEMCPY(tables, acpi_gbl_root_table_list.tables, - (acpi_size) acpi_gbl_root_table_list. - max_table_count * sizeof(struct acpi_table_desc)); + (acpi_size) table_count * + sizeof(struct acpi_table_desc)); if (acpi_gbl_root_table_list.flags & ACPI_ROOT_ORIGIN_ALLOCATED) { ACPI_FREE(acpi_gbl_root_table_list.tables); @@ -386,9 +392,9 @@ acpi_status acpi_tb_resize_root_table_list(void) } acpi_gbl_root_table_list.tables = tables; - acpi_gbl_root_table_list.max_table_count += - ACPI_ROOT_TABLE_SIZE_INCREMENT; - acpi_gbl_root_table_list.flags |= (u8)ACPI_ROOT_ORIGIN_ALLOCATED; + acpi_gbl_root_table_list.max_table_count = + table_count + ACPI_ROOT_TABLE_SIZE_INCREMENT; + acpi_gbl_root_table_list.flags |= ACPI_ROOT_ORIGIN_ALLOCATED; return_ACPI_STATUS(AE_OK); } diff --git a/drivers/acpi/acpica/tbxface.c b/drivers/acpi/acpica/tbxface.c index 29e51bc0138..21101262e47 100644 --- a/drivers/acpi/acpica/tbxface.c +++ b/drivers/acpi/acpica/tbxface.c @@ -159,14 +159,12 @@ acpi_initialize_tables(struct acpi_table_desc * initial_table_array, * DESCRIPTION: Reallocate Root Table List into dynamic memory. Copies the * root list from the previously provided scratch area. Should * be called once dynamic memory allocation is available in the - * kernel + * kernel. * ******************************************************************************/ acpi_status acpi_reallocate_root_table(void) { - struct acpi_table_desc *tables; - acpi_size new_size; - acpi_size current_size; + acpi_status status; ACPI_FUNCTION_TRACE(acpi_reallocate_root_table); @@ -178,39 +176,10 @@ acpi_status acpi_reallocate_root_table(void) return_ACPI_STATUS(AE_SUPPORT); } - /* - * Get the current size of the root table and add the default - * increment to create the new table size. - */ - current_size = (acpi_size) - acpi_gbl_root_table_list.current_table_count * - sizeof(struct acpi_table_desc); - - new_size = current_size + - (ACPI_ROOT_TABLE_SIZE_INCREMENT * sizeof(struct acpi_table_desc)); - - /* Create new array and copy the old array */ - - tables = ACPI_ALLOCATE_ZEROED(new_size); - if (!tables) { - return_ACPI_STATUS(AE_NO_MEMORY); - } + acpi_gbl_root_table_list.flags |= ACPI_ROOT_ALLOW_RESIZE; - ACPI_MEMCPY(tables, acpi_gbl_root_table_list.tables, current_size); - - /* - * Update the root table descriptor. The new size will be the current - * number of tables plus the increment, independent of the reserved - * size of the original table list. - */ - acpi_gbl_root_table_list.tables = tables; - acpi_gbl_root_table_list.max_table_count = - acpi_gbl_root_table_list.current_table_count + - ACPI_ROOT_TABLE_SIZE_INCREMENT; - acpi_gbl_root_table_list.flags = - ACPI_ROOT_ORIGIN_ALLOCATED | ACPI_ROOT_ALLOW_RESIZE; - - return_ACPI_STATUS(AE_OK); + status = acpi_tb_resize_root_table_list(); + return_ACPI_STATUS(status); } /******************************************************************************* diff --git a/drivers/acpi/acpica/utosi.c b/drivers/acpi/acpica/utosi.c index 34ef0bd7e4b..676285d6116 100644 --- a/drivers/acpi/acpica/utosi.c +++ b/drivers/acpi/acpica/utosi.c @@ -73,6 +73,7 @@ static struct acpi_interface_info acpi_default_supported_interfaces[] = { {"Windows 2006 SP1", NULL, 0, ACPI_OSI_WIN_VISTA_SP1}, /* Windows Vista SP1 - Added 09/2009 */ {"Windows 2006 SP2", NULL, 0, ACPI_OSI_WIN_VISTA_SP2}, /* Windows Vista SP2 - Added 09/2010 */ {"Windows 2009", NULL, 0, ACPI_OSI_WIN_7}, /* Windows 7 and Server 2008 R2 - Added 09/2009 */ + {"Windows 2012", NULL, 0, ACPI_OSI_WIN_8}, /* Windows 8 and Server 2012 - Added 08/2012 */ /* Feature Group Strings */ diff --git a/drivers/acpi/acpica/utxface.c b/drivers/acpi/acpica/utxface.c index 534179f1177..b09632b4f5b 100644 --- a/drivers/acpi/acpica/utxface.c +++ b/drivers/acpi/acpica/utxface.c @@ -1,6 +1,6 @@ /****************************************************************************** * - * Module Name: utxface - External interfaces for "global" ACPI functions + * Module Name: utxface - External interfaces, miscellaneous utility functions * *****************************************************************************/ @@ -53,271 +53,6 @@ #define _COMPONENT ACPI_UTILITIES ACPI_MODULE_NAME("utxface") -#ifndef ACPI_ASL_COMPILER -/******************************************************************************* - * - * FUNCTION: acpi_initialize_subsystem - * - * PARAMETERS: None - * - * RETURN: Status - * - * DESCRIPTION: Initializes all global variables. This is the first function - * called, so any early initialization belongs here. - * - ******************************************************************************/ -acpi_status __init acpi_initialize_subsystem(void) -{ - acpi_status status; - - ACPI_FUNCTION_TRACE(acpi_initialize_subsystem); - - acpi_gbl_startup_flags = ACPI_SUBSYSTEM_INITIALIZE; - ACPI_DEBUG_EXEC(acpi_ut_init_stack_ptr_trace()); - - /* Initialize the OS-Dependent layer */ - - status = acpi_os_initialize(); - if (ACPI_FAILURE(status)) { - ACPI_EXCEPTION((AE_INFO, status, "During OSL initialization")); - return_ACPI_STATUS(status); - } - - /* Initialize all globals used by the subsystem */ - - status = acpi_ut_init_globals(); - if (ACPI_FAILURE(status)) { - ACPI_EXCEPTION((AE_INFO, status, - "During initialization of globals")); - return_ACPI_STATUS(status); - } - - /* Create the default mutex objects */ - - status = acpi_ut_mutex_initialize(); - if (ACPI_FAILURE(status)) { - ACPI_EXCEPTION((AE_INFO, status, - "During Global Mutex creation")); - return_ACPI_STATUS(status); - } - - /* - * Initialize the namespace manager and - * the root of the namespace tree - */ - status = acpi_ns_root_initialize(); - if (ACPI_FAILURE(status)) { - ACPI_EXCEPTION((AE_INFO, status, - "During Namespace initialization")); - return_ACPI_STATUS(status); - } - - /* Initialize the global OSI interfaces list with the static names */ - - status = acpi_ut_initialize_interfaces(); - if (ACPI_FAILURE(status)) { - ACPI_EXCEPTION((AE_INFO, status, - "During OSI interfaces initialization")); - return_ACPI_STATUS(status); - } - - /* If configured, initialize the AML debugger */ - - ACPI_DEBUGGER_EXEC(status = acpi_db_initialize()); - return_ACPI_STATUS(status); -} - -/******************************************************************************* - * - * FUNCTION: acpi_enable_subsystem - * - * PARAMETERS: flags - Init/enable Options - * - * RETURN: Status - * - * DESCRIPTION: Completes the subsystem initialization including hardware. - * Puts system into ACPI mode if it isn't already. - * - ******************************************************************************/ -acpi_status acpi_enable_subsystem(u32 flags) -{ - acpi_status status = AE_OK; - - ACPI_FUNCTION_TRACE(acpi_enable_subsystem); - -#if (!ACPI_REDUCED_HARDWARE) - - /* Enable ACPI mode */ - - if (!(flags & ACPI_NO_ACPI_ENABLE)) { - ACPI_DEBUG_PRINT((ACPI_DB_EXEC, - "[Init] Going into ACPI mode\n")); - - acpi_gbl_original_mode = acpi_hw_get_mode(); - - status = acpi_enable(); - if (ACPI_FAILURE(status)) { - ACPI_WARNING((AE_INFO, "AcpiEnable failed")); - return_ACPI_STATUS(status); - } - } - - /* - * Obtain a permanent mapping for the FACS. This is required for the - * Global Lock and the Firmware Waking Vector - */ - status = acpi_tb_initialize_facs(); - if (ACPI_FAILURE(status)) { - ACPI_WARNING((AE_INFO, "Could not map the FACS table")); - return_ACPI_STATUS(status); - } -#endif /* !ACPI_REDUCED_HARDWARE */ - - /* - * Install the default op_region handlers. These are installed unless - * other handlers have already been installed via the - * install_address_space_handler interface. - */ - if (!(flags & ACPI_NO_ADDRESS_SPACE_INIT)) { - ACPI_DEBUG_PRINT((ACPI_DB_EXEC, - "[Init] Installing default address space handlers\n")); - - status = acpi_ev_install_region_handlers(); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - } -#if (!ACPI_REDUCED_HARDWARE) - /* - * Initialize ACPI Event handling (Fixed and General Purpose) - * - * Note1: We must have the hardware and events initialized before we can - * execute any control methods safely. Any control method can require - * ACPI hardware support, so the hardware must be fully initialized before - * any method execution! - * - * Note2: Fixed events are initialized and enabled here. GPEs are - * initialized, but cannot be enabled until after the hardware is - * completely initialized (SCI and global_lock activated) - */ - if (!(flags & ACPI_NO_EVENT_INIT)) { - ACPI_DEBUG_PRINT((ACPI_DB_EXEC, - "[Init] Initializing ACPI events\n")); - - status = acpi_ev_initialize_events(); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - } - - /* - * Install the SCI handler and Global Lock handler. This completes the - * hardware initialization. - */ - if (!(flags & ACPI_NO_HANDLER_INIT)) { - ACPI_DEBUG_PRINT((ACPI_DB_EXEC, - "[Init] Installing SCI/GL handlers\n")); - - status = acpi_ev_install_xrupt_handlers(); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - } -#endif /* !ACPI_REDUCED_HARDWARE */ - - return_ACPI_STATUS(status); -} - -ACPI_EXPORT_SYMBOL(acpi_enable_subsystem) - -/******************************************************************************* - * - * FUNCTION: acpi_initialize_objects - * - * PARAMETERS: flags - Init/enable Options - * - * RETURN: Status - * - * DESCRIPTION: Completes namespace initialization by initializing device - * objects and executing AML code for Regions, buffers, etc. - * - ******************************************************************************/ -acpi_status acpi_initialize_objects(u32 flags) -{ - acpi_status status = AE_OK; - - ACPI_FUNCTION_TRACE(acpi_initialize_objects); - - /* - * Run all _REG methods - * - * Note: Any objects accessed by the _REG methods will be automatically - * initialized, even if they contain executable AML (see the call to - * acpi_ns_initialize_objects below). - */ - if (!(flags & ACPI_NO_ADDRESS_SPACE_INIT)) { - ACPI_DEBUG_PRINT((ACPI_DB_EXEC, - "[Init] Executing _REG OpRegion methods\n")); - - status = acpi_ev_initialize_op_regions(); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - } - - /* - * Execute any module-level code that was detected during the table load - * phase. Although illegal since ACPI 2.0, there are many machines that - * contain this type of code. Each block of detected executable AML code - * outside of any control method is wrapped with a temporary control - * method object and placed on a global list. The methods on this list - * are executed below. - */ - acpi_ns_exec_module_code_list(); - - /* - * Initialize the objects that remain uninitialized. This runs the - * executable AML that may be part of the declaration of these objects: - * operation_regions, buffer_fields, Buffers, and Packages. - */ - if (!(flags & ACPI_NO_OBJECT_INIT)) { - ACPI_DEBUG_PRINT((ACPI_DB_EXEC, - "[Init] Completing Initialization of ACPI Objects\n")); - - status = acpi_ns_initialize_objects(); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - } - - /* - * Initialize all device objects in the namespace. This runs the device - * _STA and _INI methods. - */ - if (!(flags & ACPI_NO_DEVICE_INIT)) { - ACPI_DEBUG_PRINT((ACPI_DB_EXEC, - "[Init] Initializing ACPI Devices\n")); - - status = acpi_ns_initialize_devices(); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - } - - /* - * Empty the caches (delete the cached objects) on the assumption that - * the table load filled them up more than they will be at runtime -- - * thus wasting non-paged memory. - */ - status = acpi_purge_cached_objects(); - - acpi_gbl_startup_flags |= ACPI_INITIALIZED_OK; - return_ACPI_STATUS(status); -} - -ACPI_EXPORT_SYMBOL(acpi_initialize_objects) - -#endif /******************************************************************************* * * FUNCTION: acpi_terminate @@ -683,3 +418,90 @@ acpi_check_address_range(acpi_adr_space_type space_id, ACPI_EXPORT_SYMBOL(acpi_check_address_range) #endif /* !ACPI_ASL_COMPILER */ +/******************************************************************************* + * + * FUNCTION: acpi_decode_pld_buffer + * + * PARAMETERS: in_buffer - Buffer returned by _PLD method + * length - Length of the in_buffer + * return_buffer - Where the decode buffer is returned + * + * RETURN: Status and the decoded _PLD buffer. User must deallocate + * the buffer via ACPI_FREE. + * + * DESCRIPTION: Decode the bit-packed buffer returned by the _PLD method into + * a local struct that is much more useful to an ACPI driver. + * + ******************************************************************************/ +acpi_status +acpi_decode_pld_buffer(u8 *in_buffer, + acpi_size length, struct acpi_pld_info ** return_buffer) +{ + struct acpi_pld_info *pld_info; + u32 *buffer = ACPI_CAST_PTR(u32, in_buffer); + u32 dword; + + /* Parameter validation */ + + if (!in_buffer || !return_buffer || (length < 16)) { + return (AE_BAD_PARAMETER); + } + + pld_info = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_pld_info)); + if (!pld_info) { + return (AE_NO_MEMORY); + } + + /* First 32-bit DWord */ + + ACPI_MOVE_32_TO_32(&dword, &buffer[0]); + pld_info->revision = ACPI_PLD_GET_REVISION(&dword); + pld_info->ignore_color = ACPI_PLD_GET_IGNORE_COLOR(&dword); + pld_info->color = ACPI_PLD_GET_COLOR(&dword); + + /* Second 32-bit DWord */ + + ACPI_MOVE_32_TO_32(&dword, &buffer[1]); + pld_info->width = ACPI_PLD_GET_WIDTH(&dword); + pld_info->height = ACPI_PLD_GET_HEIGHT(&dword); + + /* Third 32-bit DWord */ + + ACPI_MOVE_32_TO_32(&dword, &buffer[2]); + pld_info->user_visible = ACPI_PLD_GET_USER_VISIBLE(&dword); + pld_info->dock = ACPI_PLD_GET_DOCK(&dword); + pld_info->lid = ACPI_PLD_GET_LID(&dword); + pld_info->panel = ACPI_PLD_GET_PANEL(&dword); + pld_info->vertical_position = ACPI_PLD_GET_VERTICAL(&dword); + pld_info->horizontal_position = ACPI_PLD_GET_HORIZONTAL(&dword); + pld_info->shape = ACPI_PLD_GET_SHAPE(&dword); + pld_info->group_orientation = ACPI_PLD_GET_ORIENTATION(&dword); + pld_info->group_token = ACPI_PLD_GET_TOKEN(&dword); + pld_info->group_position = ACPI_PLD_GET_POSITION(&dword); + pld_info->bay = ACPI_PLD_GET_BAY(&dword); + + /* Fourth 32-bit DWord */ + + ACPI_MOVE_32_TO_32(&dword, &buffer[3]); + pld_info->ejectable = ACPI_PLD_GET_EJECTABLE(&dword); + pld_info->ospm_eject_required = ACPI_PLD_GET_OSPM_EJECT(&dword); + pld_info->cabinet_number = ACPI_PLD_GET_CABINET(&dword); + pld_info->card_cage_number = ACPI_PLD_GET_CARD_CAGE(&dword); + pld_info->reference = ACPI_PLD_GET_REFERENCE(&dword); + pld_info->rotation = ACPI_PLD_GET_ROTATION(&dword); + pld_info->order = ACPI_PLD_GET_ORDER(&dword); + + if (length >= ACPI_PLD_BUFFER_SIZE) { + + /* Fifth 32-bit DWord (Revision 2 of _PLD) */ + + ACPI_MOVE_32_TO_32(&dword, &buffer[4]); + pld_info->vertical_offset = ACPI_PLD_GET_VERT_OFFSET(&dword); + pld_info->horizontal_offset = ACPI_PLD_GET_HORIZ_OFFSET(&dword); + } + + *return_buffer = pld_info; + return (AE_OK); +} + +ACPI_EXPORT_SYMBOL(acpi_decode_pld_buffer) diff --git a/drivers/acpi/acpica/utxfinit.c b/drivers/acpi/acpica/utxfinit.c new file mode 100644 index 00000000000..14f523627a5 --- /dev/null +++ b/drivers/acpi/acpica/utxfinit.c @@ -0,0 +1,317 @@ +/****************************************************************************** + * + * Module Name: utxfinit - External interfaces for ACPICA initialization + * + *****************************************************************************/ + +/* + * Copyright (C) 2000 - 2012, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include <linux/export.h> +#include <acpi/acpi.h> +#include "accommon.h" +#include "acevents.h" +#include "acnamesp.h" +#include "acdebug.h" +#include "actables.h" + +#define _COMPONENT ACPI_UTILITIES +ACPI_MODULE_NAME("utxfinit") + +/******************************************************************************* + * + * FUNCTION: acpi_initialize_subsystem + * + * PARAMETERS: None + * + * RETURN: Status + * + * DESCRIPTION: Initializes all global variables. This is the first function + * called, so any early initialization belongs here. + * + ******************************************************************************/ +acpi_status acpi_initialize_subsystem(void) +{ + acpi_status status; + + ACPI_FUNCTION_TRACE(acpi_initialize_subsystem); + + acpi_gbl_startup_flags = ACPI_SUBSYSTEM_INITIALIZE; + ACPI_DEBUG_EXEC(acpi_ut_init_stack_ptr_trace()); + + /* Initialize the OS-Dependent layer */ + + status = acpi_os_initialize(); + if (ACPI_FAILURE(status)) { + ACPI_EXCEPTION((AE_INFO, status, "During OSL initialization")); + return_ACPI_STATUS(status); + } + + /* Initialize all globals used by the subsystem */ + + status = acpi_ut_init_globals(); + if (ACPI_FAILURE(status)) { + ACPI_EXCEPTION((AE_INFO, status, + "During initialization of globals")); + return_ACPI_STATUS(status); + } + + /* Create the default mutex objects */ + + status = acpi_ut_mutex_initialize(); + if (ACPI_FAILURE(status)) { + ACPI_EXCEPTION((AE_INFO, status, + "During Global Mutex creation")); + return_ACPI_STATUS(status); + } + + /* + * Initialize the namespace manager and + * the root of the namespace tree + */ + status = acpi_ns_root_initialize(); + if (ACPI_FAILURE(status)) { + ACPI_EXCEPTION((AE_INFO, status, + "During Namespace initialization")); + return_ACPI_STATUS(status); + } + + /* Initialize the global OSI interfaces list with the static names */ + + status = acpi_ut_initialize_interfaces(); + if (ACPI_FAILURE(status)) { + ACPI_EXCEPTION((AE_INFO, status, + "During OSI interfaces initialization")); + return_ACPI_STATUS(status); + } + + /* If configured, initialize the AML debugger */ + + ACPI_DEBUGGER_EXEC(status = acpi_db_initialize()); + return_ACPI_STATUS(status); +} +ACPI_EXPORT_SYMBOL(acpi_initialize_subsystem) + +/******************************************************************************* + * + * FUNCTION: acpi_enable_subsystem + * + * PARAMETERS: flags - Init/enable Options + * + * RETURN: Status + * + * DESCRIPTION: Completes the subsystem initialization including hardware. + * Puts system into ACPI mode if it isn't already. + * + ******************************************************************************/ +acpi_status acpi_enable_subsystem(u32 flags) +{ + acpi_status status = AE_OK; + + ACPI_FUNCTION_TRACE(acpi_enable_subsystem); + +#if (!ACPI_REDUCED_HARDWARE) + + /* Enable ACPI mode */ + + if (!(flags & ACPI_NO_ACPI_ENABLE)) { + ACPI_DEBUG_PRINT((ACPI_DB_EXEC, + "[Init] Going into ACPI mode\n")); + + acpi_gbl_original_mode = acpi_hw_get_mode(); + + status = acpi_enable(); + if (ACPI_FAILURE(status)) { + ACPI_WARNING((AE_INFO, "AcpiEnable failed")); + return_ACPI_STATUS(status); + } + } + + /* + * Obtain a permanent mapping for the FACS. This is required for the + * Global Lock and the Firmware Waking Vector + */ + status = acpi_tb_initialize_facs(); + if (ACPI_FAILURE(status)) { + ACPI_WARNING((AE_INFO, "Could not map the FACS table")); + return_ACPI_STATUS(status); + } +#endif /* !ACPI_REDUCED_HARDWARE */ + + /* + * Install the default op_region handlers. These are installed unless + * other handlers have already been installed via the + * install_address_space_handler interface. + */ + if (!(flags & ACPI_NO_ADDRESS_SPACE_INIT)) { + ACPI_DEBUG_PRINT((ACPI_DB_EXEC, + "[Init] Installing default address space handlers\n")); + + status = acpi_ev_install_region_handlers(); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + } +#if (!ACPI_REDUCED_HARDWARE) + /* + * Initialize ACPI Event handling (Fixed and General Purpose) + * + * Note1: We must have the hardware and events initialized before we can + * execute any control methods safely. Any control method can require + * ACPI hardware support, so the hardware must be fully initialized before + * any method execution! + * + * Note2: Fixed events are initialized and enabled here. GPEs are + * initialized, but cannot be enabled until after the hardware is + * completely initialized (SCI and global_lock activated) and the various + * initialization control methods are run (_REG, _STA, _INI) on the + * entire namespace. + */ + if (!(flags & ACPI_NO_EVENT_INIT)) { + ACPI_DEBUG_PRINT((ACPI_DB_EXEC, + "[Init] Initializing ACPI events\n")); + + status = acpi_ev_initialize_events(); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + } + + /* + * Install the SCI handler and Global Lock handler. This completes the + * hardware initialization. + */ + if (!(flags & ACPI_NO_HANDLER_INIT)) { + ACPI_DEBUG_PRINT((ACPI_DB_EXEC, + "[Init] Installing SCI/GL handlers\n")); + + status = acpi_ev_install_xrupt_handlers(); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + } +#endif /* !ACPI_REDUCED_HARDWARE */ + + return_ACPI_STATUS(status); +} +ACPI_EXPORT_SYMBOL(acpi_enable_subsystem) + +/******************************************************************************* + * + * FUNCTION: acpi_initialize_objects + * + * PARAMETERS: flags - Init/enable Options + * + * RETURN: Status + * + * DESCRIPTION: Completes namespace initialization by initializing device + * objects and executing AML code for Regions, buffers, etc. + * + ******************************************************************************/ +acpi_status acpi_initialize_objects(u32 flags) +{ + acpi_status status = AE_OK; + + ACPI_FUNCTION_TRACE(acpi_initialize_objects); + + /* + * Run all _REG methods + * + * Note: Any objects accessed by the _REG methods will be automatically + * initialized, even if they contain executable AML (see the call to + * acpi_ns_initialize_objects below). + */ + if (!(flags & ACPI_NO_ADDRESS_SPACE_INIT)) { + ACPI_DEBUG_PRINT((ACPI_DB_EXEC, + "[Init] Executing _REG OpRegion methods\n")); + + status = acpi_ev_initialize_op_regions(); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + } + + /* + * Execute any module-level code that was detected during the table load + * phase. Although illegal since ACPI 2.0, there are many machines that + * contain this type of code. Each block of detected executable AML code + * outside of any control method is wrapped with a temporary control + * method object and placed on a global list. The methods on this list + * are executed below. + */ + acpi_ns_exec_module_code_list(); + + /* + * Initialize the objects that remain uninitialized. This runs the + * executable AML that may be part of the declaration of these objects: + * operation_regions, buffer_fields, Buffers, and Packages. + */ + if (!(flags & ACPI_NO_OBJECT_INIT)) { + ACPI_DEBUG_PRINT((ACPI_DB_EXEC, + "[Init] Completing Initialization of ACPI Objects\n")); + + status = acpi_ns_initialize_objects(); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + } + + /* + * Initialize all device objects in the namespace. This runs the device + * _STA and _INI methods. + */ + if (!(flags & ACPI_NO_DEVICE_INIT)) { + ACPI_DEBUG_PRINT((ACPI_DB_EXEC, + "[Init] Initializing ACPI Devices\n")); + + status = acpi_ns_initialize_devices(); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + } + + /* + * Empty the caches (delete the cached objects) on the assumption that + * the table load filled them up more than they will be at runtime -- + * thus wasting non-paged memory. + */ + status = acpi_purge_cached_objects(); + + acpi_gbl_startup_flags |= ACPI_INITIALIZED_OK; + return_ACPI_STATUS(status); +} +ACPI_EXPORT_SYMBOL(acpi_initialize_objects) |