diff options
Diffstat (limited to 'drivers/acpi/acpica')
75 files changed, 1896 insertions, 1200 deletions
diff --git a/drivers/acpi/acpica/Makefile b/drivers/acpi/acpica/Makefile index 3f23298ee3f..17e50824a6f 100644 --- a/drivers/acpi/acpica/Makefile +++ b/drivers/acpi/acpica/Makefile @@ -18,7 +18,7 @@ obj-y += exconfig.o exfield.o exnames.o exoparg6.o exresolv.o exstorob.o\ excreate.o exmisc.o exoparg2.o exregion.o exstore.o exutils.o \ exdump.o exmutex.o exoparg3.o exresnte.o exstoren.o -obj-y += hwacpi.o hwgpe.o hwregs.o hwsleep.o hwxface.o +obj-y += hwacpi.o hwgpe.o hwregs.o hwsleep.o hwxface.o hwvalid.o obj-$(ACPI_FUTURE_USAGE) += hwtimer.o @@ -41,4 +41,4 @@ obj-y += tbxface.o tbinstal.o tbutils.o tbfind.o tbfadt.o tbxfroot.o obj-y += utalloc.o utdebug.o uteval.o utinit.o utmisc.o utxface.o \ utcopy.o utdelete.o utglobal.o utmath.o utobject.o \ - utstate.o utmutex.o utobject.o utresrc.o + utstate.o utmutex.o utobject.o utresrc.o utlock.o diff --git a/drivers/acpi/acpica/acglobal.h b/drivers/acpi/acpica/acglobal.h index ddb40f5c68f..16e5210ae93 100644 --- a/drivers/acpi/acpica/acglobal.h +++ b/drivers/acpi/acpica/acglobal.h @@ -148,9 +148,12 @@ ACPI_EXTERN struct acpi_internal_rsdt acpi_gbl_root_table_list; ACPI_EXTERN struct acpi_table_fadt acpi_gbl_FADT; ACPI_EXTERN struct acpi_table_facs *acpi_gbl_FACS; -/* These addresses are calculated from FADT address values */ +/* These addresses are calculated from the FADT Event Block addresses */ +ACPI_EXTERN struct acpi_generic_address acpi_gbl_xpm1a_status; ACPI_EXTERN struct acpi_generic_address acpi_gbl_xpm1a_enable; + +ACPI_EXTERN struct acpi_generic_address acpi_gbl_xpm1b_status; ACPI_EXTERN struct acpi_generic_address acpi_gbl_xpm1b_enable; /* @@ -162,6 +165,10 @@ ACPI_EXTERN u8 acpi_gbl_integer_bit_width; ACPI_EXTERN u8 acpi_gbl_integer_byte_width; ACPI_EXTERN u8 acpi_gbl_integer_nybble_width; +/* Reader/Writer lock is used for namespace walk and dynamic table unload */ + +ACPI_EXTERN struct acpi_rw_lock acpi_gbl_namespace_rw_lock; + /***************************************************************************** * * Mutual exlusion within ACPICA subsystem @@ -245,6 +252,7 @@ ACPI_EXTERN u8 acpi_gbl_step_to_next_call; ACPI_EXTERN u8 acpi_gbl_acpi_hardware_present; ACPI_EXTERN u8 acpi_gbl_events_initialized; ACPI_EXTERN u8 acpi_gbl_system_awake_and_running; +ACPI_EXTERN u8 acpi_gbl_osi_data; #ifndef DEFINE_ACPI_GLOBALS @@ -371,7 +379,6 @@ ACPI_EXTERN char *acpi_gbl_db_buffer; ACPI_EXTERN char *acpi_gbl_db_filename; ACPI_EXTERN u32 acpi_gbl_db_debug_level; ACPI_EXTERN u32 acpi_gbl_db_console_debug_level; -ACPI_EXTERN struct acpi_table_header *acpi_gbl_db_table_ptr; ACPI_EXTERN struct acpi_namespace_node *acpi_gbl_db_scope_node; /* diff --git a/drivers/acpi/acpica/achware.h b/drivers/acpi/acpica/achware.h index 58c69dc49ab..4afa3d8e0ef 100644 --- a/drivers/acpi/acpica/achware.h +++ b/drivers/acpi/acpica/achware.h @@ -64,14 +64,22 @@ u32 acpi_hw_get_mode(void); */ struct acpi_bit_register_info *acpi_hw_get_bit_register_info(u32 register_id); -acpi_status -acpi_hw_register_read(u32 register_id, u32 * return_value); +acpi_status acpi_hw_write_pm1_control(u32 pm1a_control, u32 pm1b_control); + +acpi_status acpi_hw_register_read(u32 register_id, u32 *return_value); acpi_status acpi_hw_register_write(u32 register_id, u32 value); acpi_status acpi_hw_clear_acpi_status(void); /* + * hwvalid - Port I/O with validation + */ +acpi_status acpi_hw_read_port(acpi_io_address address, u32 *value, u32 width); + +acpi_status acpi_hw_write_port(acpi_io_address address, u32 value, u32 width); + +/* * hwgpe - GPE support */ acpi_status acpi_hw_low_disable_gpe(struct acpi_gpe_event_info *gpe_event_info); diff --git a/drivers/acpi/acpica/aclocal.h b/drivers/acpi/acpica/aclocal.h index 492d02761bb..772ee5c4ccc 100644 --- a/drivers/acpi/acpica/aclocal.h +++ b/drivers/acpi/acpica/aclocal.h @@ -108,6 +108,14 @@ static char *acpi_gbl_mutex_names[ACPI_NUM_MUTEX] = { #endif #endif +/* Lock structure for reader/writer interfaces */ + +struct acpi_rw_lock { + acpi_mutex writer_mutex; + acpi_mutex reader_mutex; + u32 num_readers; +}; + /* * Predefined handles for spinlocks used within the subsystem. * These spinlocks are created by acpi_ut_mutex_initialize @@ -772,7 +780,19 @@ struct acpi_bit_register_info { * must be preserved. */ #define ACPI_PM1_STATUS_PRESERVED_BITS 0x0800 /* Bit 11 */ -#define ACPI_PM1_CONTROL_PRESERVED_BITS 0x0200 /* Bit 9 (whatever) */ + +/* Write-only bits must be zeroed by software */ + +#define ACPI_PM1_CONTROL_WRITEONLY_BITS 0x2004 /* Bits 13, 2 */ + +/* For control registers, both ignored and reserved bits must be preserved */ + +#define ACPI_PM1_CONTROL_IGNORED_BITS 0x0201 /* Bits 9, 0(SCI_EN) */ +#define ACPI_PM1_CONTROL_RESERVED_BITS 0xC1F8 /* Bits 14-15, 3-8 */ +#define ACPI_PM1_CONTROL_PRESERVED_BITS \ + (ACPI_PM1_CONTROL_IGNORED_BITS | ACPI_PM1_CONTROL_RESERVED_BITS) + +#define ACPI_PM2_CONTROL_PRESERVED_BITS 0xFFFFFFFE /* All except bit 0 */ /* * Register IDs @@ -781,12 +801,10 @@ struct acpi_bit_register_info { #define ACPI_REGISTER_PM1_STATUS 0x01 #define ACPI_REGISTER_PM1_ENABLE 0x02 #define ACPI_REGISTER_PM1_CONTROL 0x03 -#define ACPI_REGISTER_PM1A_CONTROL 0x04 -#define ACPI_REGISTER_PM1B_CONTROL 0x05 -#define ACPI_REGISTER_PM2_CONTROL 0x06 -#define ACPI_REGISTER_PM_TIMER 0x07 -#define ACPI_REGISTER_PROCESSOR_BLOCK 0x08 -#define ACPI_REGISTER_SMI_COMMAND_BLOCK 0x09 +#define ACPI_REGISTER_PM2_CONTROL 0x04 +#define ACPI_REGISTER_PM_TIMER 0x05 +#define ACPI_REGISTER_PROCESSOR_BLOCK 0x06 +#define ACPI_REGISTER_SMI_COMMAND_BLOCK 0x07 /* Masks used to access the bit_registers */ @@ -818,7 +836,7 @@ struct acpi_bit_register_info { #define ACPI_BITMASK_SCI_ENABLE 0x0001 #define ACPI_BITMASK_BUS_MASTER_RLD 0x0002 #define ACPI_BITMASK_GLOBAL_LOCK_RELEASE 0x0004 -#define ACPI_BITMASK_SLEEP_TYPE_X 0x1C00 +#define ACPI_BITMASK_SLEEP_TYPE 0x1C00 #define ACPI_BITMASK_SLEEP_ENABLE 0x2000 #define ACPI_BITMASK_ARB_DISABLE 0x0001 @@ -844,11 +862,35 @@ struct acpi_bit_register_info { #define ACPI_BITPOSITION_SCI_ENABLE 0x00 #define ACPI_BITPOSITION_BUS_MASTER_RLD 0x01 #define ACPI_BITPOSITION_GLOBAL_LOCK_RELEASE 0x02 -#define ACPI_BITPOSITION_SLEEP_TYPE_X 0x0A +#define ACPI_BITPOSITION_SLEEP_TYPE 0x0A #define ACPI_BITPOSITION_SLEEP_ENABLE 0x0D #define ACPI_BITPOSITION_ARB_DISABLE 0x00 +/* Structs and definitions for _OSI support and I/O port validation */ + +#define ACPI_OSI_WIN_2000 0x01 +#define ACPI_OSI_WIN_XP 0x02 +#define ACPI_OSI_WIN_XP_SP1 0x03 +#define ACPI_OSI_WINSRV_2003 0x04 +#define ACPI_OSI_WIN_XP_SP2 0x05 +#define ACPI_OSI_WINSRV_2003_SP1 0x06 +#define ACPI_OSI_WIN_VISTA 0x07 + +#define ACPI_ALWAYS_ILLEGAL 0x00 + +struct acpi_interface_info { + char *name; + u8 value; +}; + +struct acpi_port_info { + char *name; + u16 start; + u16 end; + u8 osi_dependency; +}; + /***************************************************************************** * * Resource descriptors diff --git a/drivers/acpi/acpica/acmacros.h b/drivers/acpi/acpica/acmacros.h index 9c127e8e2d6..91ac7d7b440 100644 --- a/drivers/acpi/acpica/acmacros.h +++ b/drivers/acpi/acpica/acmacros.h @@ -292,10 +292,6 @@ #define ACPI_GET_DESCRIPTOR_TYPE(d) (((union acpi_descriptor *)(void *)(d))->common.descriptor_type) #define ACPI_SET_DESCRIPTOR_TYPE(d, t) (((union acpi_descriptor *)(void *)(d))->common.descriptor_type = t) -/* Macro to test the object type */ - -#define ACPI_GET_OBJECT_TYPE(d) (((union acpi_operand_object *)(void *)(d))->common.type) - /* * Macros for the master AML opcode table */ diff --git a/drivers/acpi/acpica/acobject.h b/drivers/acpi/acpica/acobject.h index eb6f038b03d..544dcf83492 100644 --- a/drivers/acpi/acpica/acobject.h +++ b/drivers/acpi/acpica/acobject.h @@ -97,7 +97,6 @@ #define AOPOBJ_OBJECT_INITIALIZED 0x08 #define AOPOBJ_SETUP_COMPLETE 0x10 #define AOPOBJ_SINGLE_DATUM 0x20 -#define AOPOBJ_INVALID 0x40 /* Used if host OS won't allow an op_region address */ /****************************************************************************** * diff --git a/drivers/acpi/acpica/acpredef.h b/drivers/acpi/acpica/acpredef.h index 16a9ca9a66e..63f656ae360 100644 --- a/drivers/acpi/acpica/acpredef.h +++ b/drivers/acpi/acpica/acpredef.h @@ -52,41 +52,44 @@ * 1) PTYPE1 packages do not contain sub-packages. * * ACPI_PTYPE1_FIXED: Fixed length, 1 or 2 object types: - * object type - * count - * object type - * count + * object type + * count + * object type + * count * * ACPI_PTYPE1_VAR: Variable length: - * object type (Int/Buf/Ref) + * object type (Int/Buf/Ref) * - * ACPI_PTYPE1_OPTION: Package has some required and some optional elements: - * Used for _PRW + * ACPI_PTYPE1_OPTION: Package has some required and some optional elements + * (Used for _PRW) * * * 2) PTYPE2 packages contain a variable number of sub-packages. Each of the * different types describe the contents of each of the sub-packages. * * ACPI_PTYPE2: Each subpackage contains 1 or 2 object types: - * object type - * count - * object type - * count + * object type + * count + * object type + * count + * (Used for _ALR,_MLS,_PSS,_TRT,_TSS) * * ACPI_PTYPE2_COUNT: Each subpackage has a count as first element: - * object type + * object type + * (Used for _CSD,_PSD,_TSD) * * ACPI_PTYPE2_PKG_COUNT: Count of subpackages at start, 1 or 2 object types: - * object type - * count - * object type - * count + * object type + * count + * object type + * count + * (Used for _CST) * - * ACPI_PTYPE2_FIXED: Each subpackage is of fixed length: - * Used for _PRT + * ACPI_PTYPE2_FIXED: Each subpackage is of fixed length + * (Used for _PRT) * * ACPI_PTYPE2_MIN: Each subpackage has a variable but minimum length - * Used for _HPX + * (Used for _HPX) * *****************************************************************************/ diff --git a/drivers/acpi/acpica/actables.h b/drivers/acpi/acpica/actables.h index 7ce6e33c7f7..01c76b8ea7b 100644 --- a/drivers/acpi/acpica/actables.h +++ b/drivers/acpi/acpica/actables.h @@ -49,7 +49,7 @@ acpi_status acpi_allocate_root_table(u32 initial_table_count); /* * tbfadt - FADT parse/convert/validate */ -void acpi_tb_parse_fadt(u32 table_index, u8 flags); +void acpi_tb_parse_fadt(u32 table_index); void acpi_tb_create_local_fadt(struct acpi_table_header *table, u32 length); @@ -79,7 +79,7 @@ void acpi_tb_delete_table(struct acpi_table_desc *table_desc); void acpi_tb_terminate(void); -void acpi_tb_delete_namespace_by_owner(u32 table_index); +acpi_status acpi_tb_delete_namespace_by_owner(u32 table_index); acpi_status acpi_tb_allocate_owner_id(u32 table_index); @@ -109,9 +109,8 @@ acpi_tb_verify_checksum(struct acpi_table_header *table, u32 length); void acpi_tb_install_table(acpi_physical_address address, - u8 flags, char *signature, u32 table_index); + char *signature, u32 table_index); -acpi_status -acpi_tb_parse_root_table(acpi_physical_address rsdp_address, u8 flags); +acpi_status acpi_tb_parse_root_table(acpi_physical_address rsdp_address); #endif /* __ACTABLES_H__ */ diff --git a/drivers/acpi/acpica/acutils.h b/drivers/acpi/acpica/acutils.h index 80d8813484f..897810ba0cc 100644 --- a/drivers/acpi/acpica/acutils.h +++ b/drivers/acpi/acpica/acutils.h @@ -346,6 +346,21 @@ acpi_status acpi_ut_execute_sxds(struct acpi_namespace_node *device_node, u8 * highest); /* + * utlock - reader/writer locks + */ +acpi_status acpi_ut_create_rw_lock(struct acpi_rw_lock *lock); + +void acpi_ut_delete_rw_lock(struct acpi_rw_lock *lock); + +acpi_status acpi_ut_acquire_read_lock(struct acpi_rw_lock *lock); + +acpi_status acpi_ut_release_read_lock(struct acpi_rw_lock *lock); + +acpi_status acpi_ut_acquire_write_lock(struct acpi_rw_lock *lock); + +void acpi_ut_release_write_lock(struct acpi_rw_lock *lock); + +/* * utobject - internal object create/delete/cache routines */ union acpi_operand_object *acpi_ut_create_internal_object_dbg(const char diff --git a/drivers/acpi/acpica/dsinit.c b/drivers/acpi/acpica/dsinit.c index eb144b13d8f..3aae13f30c5 100644 --- a/drivers/acpi/acpica/dsinit.c +++ b/drivers/acpi/acpica/dsinit.c @@ -180,11 +180,23 @@ acpi_ds_initialize_objects(u32 table_index, /* Walk entire namespace from the supplied root */ - status = acpi_walk_namespace(ACPI_TYPE_ANY, start_node, ACPI_UINT32_MAX, - acpi_ds_init_one_object, &info, NULL); + status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + /* + * We don't use acpi_walk_namespace since we do not want to acquire + * the namespace reader lock. + */ + status = + acpi_ns_walk_namespace(ACPI_TYPE_ANY, start_node, ACPI_UINT32_MAX, + ACPI_NS_WALK_UNLOCK, acpi_ds_init_one_object, + &info, NULL); if (ACPI_FAILURE(status)) { ACPI_EXCEPTION((AE_INFO, status, "During WalkNamespace")); } + (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE); status = acpi_get_table_by_index(table_index, &table); if (ACPI_FAILURE(status)) { diff --git a/drivers/acpi/acpica/dsmthdat.c b/drivers/acpi/acpica/dsmthdat.c index da0f5468184..22b1a3ce2c9 100644 --- a/drivers/acpi/acpica/dsmthdat.c +++ b/drivers/acpi/acpica/dsmthdat.c @@ -713,6 +713,6 @@ acpi_ds_method_data_get_type(u16 opcode, /* Get the object type */ - return_VALUE(ACPI_GET_OBJECT_TYPE(object)); + return_VALUE(object->type); } #endif diff --git a/drivers/acpi/acpica/dsobject.c b/drivers/acpi/acpica/dsobject.c index 15c628e6aa0..dab3f48f0b4 100644 --- a/drivers/acpi/acpica/dsobject.c +++ b/drivers/acpi/acpica/dsobject.c @@ -565,7 +565,7 @@ acpi_ds_create_node(struct acpi_walk_state *walk_state, /* Re-type the object according to its argument */ - node->type = ACPI_GET_OBJECT_TYPE(obj_desc); + node->type = obj_desc->common.type; /* Attach obj to node */ @@ -619,7 +619,7 @@ acpi_ds_init_object_from_op(struct acpi_walk_state *walk_state, /* Perform per-object initialization */ - switch (ACPI_GET_OBJECT_TYPE(obj_desc)) { + switch (obj_desc->common.type) { case ACPI_TYPE_BUFFER: /* @@ -803,7 +803,7 @@ acpi_ds_init_object_from_op(struct acpi_walk_state *walk_state, default: ACPI_ERROR((AE_INFO, "Unimplemented data type: %X", - ACPI_GET_OBJECT_TYPE(obj_desc))); + obj_desc->common.type)); status = AE_AML_OPERAND_TYPE; break; diff --git a/drivers/acpi/acpica/dsopcode.c b/drivers/acpi/acpica/dsopcode.c index 0c3b4dd60e8..b4c87b5053e 100644 --- a/drivers/acpi/acpica/dsopcode.c +++ b/drivers/acpi/acpica/dsopcode.c @@ -397,30 +397,6 @@ acpi_status acpi_ds_get_region_arguments(union acpi_operand_object *obj_desc) status = acpi_ds_execute_arguments(node, acpi_ns_get_parent_node(node), extra_desc->extra.aml_length, extra_desc->extra.aml_start); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - /* Validate the region address/length via the host OS */ - - status = acpi_os_validate_address(obj_desc->region.space_id, - obj_desc->region.address, - (acpi_size) obj_desc->region.length, - acpi_ut_get_node_name(node)); - - if (ACPI_FAILURE(status)) { - /* - * Invalid address/length. We will emit an error message and mark - * the region as invalid, so that it will cause an additional error if - * it is ever used. Then return AE_OK. - */ - ACPI_EXCEPTION((AE_INFO, status, - "During address validation of OpRegion [%4.4s]", - node->name.ascii)); - obj_desc->common.flags |= AOPOBJ_INVALID; - status = AE_OK; - } - return_ACPI_STATUS(status); } @@ -484,7 +460,7 @@ acpi_ds_init_buffer_field(u16 aml_opcode, /* Host object must be a Buffer */ - if (ACPI_GET_OBJECT_TYPE(buffer_desc) != ACPI_TYPE_BUFFER) { + if (buffer_desc->common.type != ACPI_TYPE_BUFFER) { ACPI_ERROR((AE_INFO, "Target of Create Field is not a Buffer object - %s", acpi_ut_get_object_type_name(buffer_desc))); @@ -1365,10 +1341,8 @@ acpi_ds_exec_end_control_op(struct acpi_walk_state * walk_state, if ((ACPI_GET_DESCRIPTOR_TYPE (walk_state->results->results.obj_desc[0]) == ACPI_DESC_TYPE_OPERAND) - && - (ACPI_GET_OBJECT_TYPE - (walk_state->results->results.obj_desc[0]) == - ACPI_TYPE_LOCAL_REFERENCE) + && ((walk_state->results->results.obj_desc[0])-> + common.type == ACPI_TYPE_LOCAL_REFERENCE) && ((walk_state->results->results.obj_desc[0])-> reference.class != ACPI_REFCLASS_INDEX)) { status = diff --git a/drivers/acpi/acpica/dsutils.c b/drivers/acpi/acpica/dsutils.c index dabc23a4617..dfa10410292 100644 --- a/drivers/acpi/acpica/dsutils.c +++ b/drivers/acpi/acpica/dsutils.c @@ -816,7 +816,7 @@ acpi_status acpi_ds_evaluate_name_path(struct acpi_walk_state *walk_state) goto push_result; } - type = ACPI_GET_OBJECT_TYPE(*operand); + type = (*operand)->common.type; status = acpi_ex_resolve_to_value(operand, walk_state); if (ACPI_FAILURE(status)) { diff --git a/drivers/acpi/acpica/dswexec.c b/drivers/acpi/acpica/dswexec.c index 350e6656bc8..f0280856dc0 100644 --- a/drivers/acpi/acpica/dswexec.c +++ b/drivers/acpi/acpica/dswexec.c @@ -138,11 +138,10 @@ acpi_ds_get_predicate_value(struct acpi_walk_state *walk_state, goto cleanup; } - if (ACPI_GET_OBJECT_TYPE(local_obj_desc) != ACPI_TYPE_INTEGER) { + if (local_obj_desc->common.type != ACPI_TYPE_INTEGER) { ACPI_ERROR((AE_INFO, "Bad predicate (not an integer) ObjDesc=%p State=%p Type=%X", - obj_desc, walk_state, - ACPI_GET_OBJECT_TYPE(obj_desc))); + obj_desc, walk_state, obj_desc->common.type)); status = AE_AML_OPERAND_TYPE; goto cleanup; diff --git a/drivers/acpi/acpica/evevent.c b/drivers/acpi/acpica/evevent.c index 803edd9e3f6..cd55c774e88 100644 --- a/drivers/acpi/acpica/evevent.c +++ b/drivers/acpi/acpica/evevent.c @@ -183,7 +183,7 @@ acpi_status acpi_ev_install_xrupt_handlers(void) * * RETURN: Status * - * DESCRIPTION: Install the fixed event handlers and enable the fixed events. + * DESCRIPTION: Install the fixed event handlers and disable all fixed events. * ******************************************************************************/ @@ -200,12 +200,13 @@ static acpi_status acpi_ev_fixed_event_initialize(void) acpi_gbl_fixed_event_handlers[i].handler = NULL; acpi_gbl_fixed_event_handlers[i].context = NULL; - /* Enable the fixed event */ + /* Disable the fixed event */ if (acpi_gbl_fixed_event_info[i].enable_register_id != 0xFF) { status = - acpi_set_register(acpi_gbl_fixed_event_info[i]. - enable_register_id, 0); + acpi_write_bit_register(acpi_gbl_fixed_event_info + [i].enable_register_id, + ACPI_DISABLE_EVENT); if (ACPI_FAILURE(status)) { return (status); } @@ -288,16 +289,17 @@ static u32 acpi_ev_fixed_event_dispatch(u32 event) /* Clear the status bit */ - (void)acpi_set_register(acpi_gbl_fixed_event_info[event]. - status_register_id, 1); + (void)acpi_write_bit_register(acpi_gbl_fixed_event_info[event]. + status_register_id, ACPI_CLEAR_STATUS); /* * Make sure we've got a handler. If not, report an error. The event is * disabled to prevent further interrupts. */ if (NULL == acpi_gbl_fixed_event_handlers[event].handler) { - (void)acpi_set_register(acpi_gbl_fixed_event_info[event]. - enable_register_id, 0); + (void)acpi_write_bit_register(acpi_gbl_fixed_event_info[event]. + enable_register_id, + ACPI_DISABLE_EVENT); ACPI_ERROR((AE_INFO, "No installed handler for fixed event [%08X]", diff --git a/drivers/acpi/acpica/evgpe.c b/drivers/acpi/acpica/evgpe.c index f345ced3647..b9d8ee69ca6 100644 --- a/drivers/acpi/acpica/evgpe.c +++ b/drivers/acpi/acpica/evgpe.c @@ -88,10 +88,10 @@ acpi_ev_set_gpe_type(struct acpi_gpe_event_info *gpe_event_info, u8 type) status = acpi_ev_disable_gpe(gpe_event_info); - /* Type was validated above */ + /* Clear the type bits and insert the new Type */ - gpe_event_info->flags &= ~ACPI_GPE_TYPE_MASK; /* Clear type bits */ - gpe_event_info->flags |= type; /* Insert type */ + gpe_event_info->flags &= ~ACPI_GPE_TYPE_MASK; + gpe_event_info->flags |= type; return_ACPI_STATUS(status); } @@ -122,6 +122,7 @@ acpi_ev_update_gpe_enable_masks(struct acpi_gpe_event_info *gpe_event_info, if (!gpe_register_info) { return_ACPI_STATUS(AE_NOT_EXIST); } + register_bit = (u8) (1 << (gpe_event_info->gpe_number - gpe_register_info->base_gpe_number)); diff --git a/drivers/acpi/acpica/evgpeblk.c b/drivers/acpi/acpica/evgpeblk.c index 484cc0565d5..7b346363942 100644 --- a/drivers/acpi/acpica/evgpeblk.c +++ b/drivers/acpi/acpica/evgpeblk.c @@ -104,9 +104,9 @@ u8 acpi_ev_valid_gpe_event(struct acpi_gpe_event_info *gpe_event_info) while (gpe_block) { if ((&gpe_block->event_info[0] <= gpe_event_info) && - (&gpe_block-> - event_info[((acpi_size) gpe_block-> - register_count) * 8] > + (&gpe_block->event_info[((acpi_size) + gpe_block-> + register_count) * 8] > gpe_event_info)) { return (TRUE); } @@ -210,10 +210,9 @@ acpi_ev_delete_gpe_handlers(struct acpi_gpe_xrupt_info *gpe_xrupt_info, /* Now look at the individual GPEs in this byte register */ for (j = 0; j < ACPI_GPE_REGISTER_WIDTH; j++) { - gpe_event_info = - &gpe_block-> - event_info[((acpi_size) i * - ACPI_GPE_REGISTER_WIDTH) + j]; + gpe_event_info = &gpe_block->event_info[((acpi_size) i * + ACPI_GPE_REGISTER_WIDTH) + + j]; if ((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) == ACPI_GPE_DISPATCH_HANDLER) { @@ -293,8 +292,8 @@ acpi_ev_save_method_info(acpi_handle obj_handle, /* Unknown method type, just ignore it! */ ACPI_DEBUG_PRINT((ACPI_DB_LOAD, - "Ignoring unknown GPE method type: %s (name not of form _Lxx or _Exx)", - name)); + "Ignoring unknown GPE method type: %s " + "(name not of form _Lxx or _Exx)", name)); return_ACPI_STATUS(AE_OK); } @@ -306,17 +305,16 @@ acpi_ev_save_method_info(acpi_handle obj_handle, /* Conversion failed; invalid method, just ignore it */ ACPI_DEBUG_PRINT((ACPI_DB_LOAD, - "Could not extract GPE number from name: %s (name is not of form _Lxx or _Exx)", - name)); + "Could not extract GPE number from name: %s " + "(name is not of form _Lxx or _Exx)", name)); return_ACPI_STATUS(AE_OK); } /* Ensure that we have a valid GPE number for this GPE block */ if ((gpe_number < gpe_block->block_base_number) || - (gpe_number >= - (gpe_block->block_base_number + - (gpe_block->register_count * 8)))) { + (gpe_number >= (gpe_block->block_base_number + + (gpe_block->register_count * 8)))) { /* * Not valid for this GPE block, just ignore it. However, it may be * valid for a different GPE block, since GPE0 and GPE1 methods both @@ -408,7 +406,7 @@ acpi_ev_match_prw_and_gpe(acpi_handle obj_handle, */ obj_desc = pkg_desc->package.elements[0]; - if (ACPI_GET_OBJECT_TYPE(obj_desc) == ACPI_TYPE_INTEGER) { + if (obj_desc->common.type == ACPI_TYPE_INTEGER) { /* Use FADT-defined GPE device (from definition of _PRW) */ @@ -417,15 +415,15 @@ acpi_ev_match_prw_and_gpe(acpi_handle obj_handle, /* Integer is the GPE number in the FADT described GPE blocks */ gpe_number = (u32) obj_desc->integer.value; - } else if (ACPI_GET_OBJECT_TYPE(obj_desc) == ACPI_TYPE_PACKAGE) { + } else if (obj_desc->common.type == ACPI_TYPE_PACKAGE) { /* Package contains a GPE reference and GPE number within a GPE block */ if ((obj_desc->package.count < 2) || - (ACPI_GET_OBJECT_TYPE(obj_desc->package.elements[0]) != - ACPI_TYPE_LOCAL_REFERENCE) - || (ACPI_GET_OBJECT_TYPE(obj_desc->package.elements[1]) != - ACPI_TYPE_INTEGER)) { + ((obj_desc->package.elements[0])->common.type != + ACPI_TYPE_LOCAL_REFERENCE) || + ((obj_desc->package.elements[1])->common.type != + ACPI_TYPE_INTEGER)) { goto cleanup; } @@ -450,11 +448,11 @@ acpi_ev_match_prw_and_gpe(acpi_handle obj_handle, */ if ((gpe_device == target_gpe_device) && (gpe_number >= gpe_block->block_base_number) && - (gpe_number < - gpe_block->block_base_number + (gpe_block->register_count * 8))) { - gpe_event_info = - &gpe_block->event_info[gpe_number - - gpe_block->block_base_number]; + (gpe_number < gpe_block->block_base_number + + (gpe_block->register_count * 8))) { + gpe_event_info = &gpe_block->event_info[gpe_number - + gpe_block-> + block_base_number]; /* Mark GPE for WAKE-ONLY but WAKE_DISABLED */ @@ -1033,8 +1031,8 @@ acpi_ev_initialize_gpe_block(struct acpi_namespace_node *gpe_device, * 1) are "runtime" or "run/wake" GPEs, and * 2) have a corresponding _Lxx or _Exx method * - * Any other GPEs within this block must be enabled via the acpi_enable_gpe() - * external interface. + * Any other GPEs within this block must be enabled via the + * acpi_enable_gpe() external interface. */ wake_gpe_count = 0; gpe_enabled_count = 0; @@ -1044,14 +1042,13 @@ acpi_ev_initialize_gpe_block(struct acpi_namespace_node *gpe_device, /* Get the info block for this particular GPE */ - gpe_event_info = - &gpe_block-> - event_info[((acpi_size) i * - ACPI_GPE_REGISTER_WIDTH) + j]; + gpe_event_info = &gpe_block->event_info[((acpi_size) i * + ACPI_GPE_REGISTER_WIDTH) + + j]; if (((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) == - ACPI_GPE_DISPATCH_METHOD) - && (gpe_event_info->flags & ACPI_GPE_TYPE_RUNTIME)) { + ACPI_GPE_DISPATCH_METHOD) && + (gpe_event_info->flags & ACPI_GPE_TYPE_RUNTIME)) { gpe_enabled_count++; } @@ -1105,8 +1102,8 @@ acpi_status acpi_ev_gpe_initialize(void) /* * Initialize the GPE Block(s) defined in the FADT * - * Why the GPE register block lengths are divided by 2: From the ACPI Spec, - * section "General-Purpose Event Registers", we have: + * Why the GPE register block lengths are divided by 2: From the ACPI + * Spec, section "General-Purpose Event Registers", we have: * * "Each register block contains two registers of equal length * GPEx_STS and GPEx_EN (where x is 0 or 1). The length of the @@ -1163,7 +1160,8 @@ acpi_status acpi_ev_gpe_initialize(void) if ((register_count0) && (gpe_number_max >= acpi_gbl_FADT.gpe1_base)) { ACPI_ERROR((AE_INFO, - "GPE0 block (GPE 0 to %d) overlaps the GPE1 block (GPE %d to %d) - Ignoring GPE1", + "GPE0 block (GPE 0 to %d) overlaps the GPE1 block " + "(GPE %d to %d) - Ignoring GPE1", gpe_number_max, acpi_gbl_FADT.gpe1_base, acpi_gbl_FADT.gpe1_base + ((register_count1 * diff --git a/drivers/acpi/acpica/evmisc.c b/drivers/acpi/acpica/evmisc.c index 5f893057bcc..ce224e1eaa8 100644 --- a/drivers/acpi/acpica/evmisc.c +++ b/drivers/acpi/acpica/evmisc.c @@ -163,10 +163,10 @@ acpi_ev_queue_notify_request(struct acpi_namespace_node * node, * 2) Global device notify handler * 3) Per-device notify handler */ - if ((acpi_gbl_system_notify.handler - && (notify_value <= ACPI_MAX_SYS_NOTIFY)) - || (acpi_gbl_device_notify.handler - && (notify_value > ACPI_MAX_SYS_NOTIFY)) || handler_obj) { + if ((acpi_gbl_system_notify.handler && + (notify_value <= ACPI_MAX_SYS_NOTIFY)) || + (acpi_gbl_device_notify.handler && + (notify_value > ACPI_MAX_SYS_NOTIFY)) || handler_obj) { notify_info = acpi_ut_create_generic_state(); if (!notify_info) { return (AE_NO_MEMORY); @@ -174,7 +174,8 @@ acpi_ev_queue_notify_request(struct acpi_namespace_node * node, if (!handler_obj) { ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "Executing system notify handler for Notify (%4.4s, %X) node %p\n", + "Executing system notify handler for Notify (%4.4s, %X) " + "node %p\n", acpi_ut_get_node_name(node), notify_value, node)); } @@ -534,8 +535,9 @@ acpi_status acpi_ev_release_global_lock(void) */ if (pending) { status = - acpi_set_register(ACPI_BITREG_GLOBAL_LOCK_RELEASE, - 1); + acpi_write_bit_register + (ACPI_BITREG_GLOBAL_LOCK_RELEASE, + ACPI_ENABLE_EVENT); } ACPI_DEBUG_PRINT((ACPI_DB_EXEC, diff --git a/drivers/acpi/acpica/evregion.c b/drivers/acpi/acpica/evregion.c index 665c0887ab4..538d6326455 100644 --- a/drivers/acpi/acpica/evregion.c +++ b/drivers/acpi/acpica/evregion.c @@ -691,7 +691,7 @@ acpi_ev_install_handler(acpi_handle obj_handle, /* Devices are handled different than regions */ - if (ACPI_GET_OBJECT_TYPE(obj_desc) == ACPI_TYPE_DEVICE) { + if (obj_desc->common.type == ACPI_TYPE_DEVICE) { /* Check if this Device already has a handler for this address space */ @@ -703,7 +703,8 @@ acpi_ev_install_handler(acpi_handle obj_handle, if (next_handler_obj->address_space.space_id == handler_obj->address_space.space_id) { ACPI_DEBUG_PRINT((ACPI_DB_OPREGION, - "Found handler for region [%s] in device %p(%p) handler %p\n", + "Found handler for region [%s] in device %p(%p) " + "handler %p\n", acpi_ut_get_region_name (handler_obj->address_space. space_id), obj_desc, diff --git a/drivers/acpi/acpica/evrgnini.c b/drivers/acpi/acpica/evrgnini.c index f3f1fb45c3d..284a7becbe9 100644 --- a/drivers/acpi/acpica/evrgnini.c +++ b/drivers/acpi/acpica/evrgnini.c @@ -241,7 +241,8 @@ acpi_ev_pci_config_region_setup(acpi_handle handle, status = AE_OK; } else { ACPI_EXCEPTION((AE_INFO, status, - "Could not install PciConfig handler for Root Bridge %4.4s", + "Could not install PciConfig handler " + "for Root Bridge %4.4s", acpi_ut_get_node_name (pci_root_node))); } @@ -293,9 +294,8 @@ acpi_ev_pci_config_region_setup(acpi_handle handle, * Get the PCI device and function numbers from the _ADR object contained * in the parent's scope. */ - status = - acpi_ut_evaluate_numeric_object(METHOD_NAME__ADR, pci_device_node, - &pci_value); + status = acpi_ut_evaluate_numeric_object(METHOD_NAME__ADR, + pci_device_node, &pci_value); /* * The default is zero, and since the allocation above zeroed the data, @@ -308,18 +308,16 @@ acpi_ev_pci_config_region_setup(acpi_handle handle, /* The PCI segment number comes from the _SEG method */ - status = - acpi_ut_evaluate_numeric_object(METHOD_NAME__SEG, pci_root_node, - &pci_value); + status = acpi_ut_evaluate_numeric_object(METHOD_NAME__SEG, + pci_root_node, &pci_value); if (ACPI_SUCCESS(status)) { pci_id->segment = ACPI_LOWORD(pci_value); } /* The PCI bus number comes from the _BBN method */ - status = - acpi_ut_evaluate_numeric_object(METHOD_NAME__BBN, pci_root_node, - &pci_value); + status = acpi_ut_evaluate_numeric_object(METHOD_NAME__BBN, + pci_root_node, &pci_value); if (ACPI_SUCCESS(status)) { pci_id->bus = ACPI_LOWORD(pci_value); } @@ -632,8 +630,8 @@ acpi_ev_initialize_region(union acpi_operand_object *region_obj, acpi_ns_locked); /* - * Tell all users that this region is usable by running the _REG - * method + * Tell all users that this region is usable by + * running the _REG method */ if (acpi_ns_locked) { status = diff --git a/drivers/acpi/acpica/evxface.c b/drivers/acpi/acpica/evxface.c index 3aca9010a11..10b8543dd46 100644 --- a/drivers/acpi/acpica/evxface.c +++ b/drivers/acpi/acpica/evxface.c @@ -631,7 +631,8 @@ acpi_install_gpe_handler(acpi_handle gpe_device, /* Setup up dispatch flags to indicate handler (vs. method) */ - gpe_event_info->flags &= ~(ACPI_GPE_XRUPT_TYPE_MASK | ACPI_GPE_DISPATCH_MASK); /* Clear bits */ + gpe_event_info->flags &= + ~(ACPI_GPE_XRUPT_TYPE_MASK | ACPI_GPE_DISPATCH_MASK); gpe_event_info->flags |= (u8) (type | ACPI_GPE_DISPATCH_HANDLER); acpi_os_release_lock(acpi_gbl_gpe_lock, flags); diff --git a/drivers/acpi/acpica/evxfevnt.c b/drivers/acpi/acpica/evxfevnt.c index 35485e4b60a..d0a080747ec 100644 --- a/drivers/acpi/acpica/evxfevnt.c +++ b/drivers/acpi/acpica/evxfevnt.c @@ -172,8 +172,8 @@ acpi_status acpi_enable_event(u32 event, u32 flags) * register bit) */ status = - acpi_set_register(acpi_gbl_fixed_event_info[event]. - enable_register_id, 1); + acpi_write_bit_register(acpi_gbl_fixed_event_info[event]. + enable_register_id, ACPI_ENABLE_EVENT); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } @@ -181,8 +181,8 @@ acpi_status acpi_enable_event(u32 event, u32 flags) /* Make sure that the hardware responded */ status = - acpi_get_register(acpi_gbl_fixed_event_info[event]. - enable_register_id, &value); + acpi_read_bit_register(acpi_gbl_fixed_event_info[event]. + enable_register_id, &value); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } @@ -354,15 +354,15 @@ acpi_status acpi_disable_event(u32 event, u32 flags) * register bit) */ status = - acpi_set_register(acpi_gbl_fixed_event_info[event]. - enable_register_id, 0); + acpi_write_bit_register(acpi_gbl_fixed_event_info[event]. + enable_register_id, ACPI_DISABLE_EVENT); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } status = - acpi_get_register(acpi_gbl_fixed_event_info[event]. - enable_register_id, &value); + acpi_read_bit_register(acpi_gbl_fixed_event_info[event]. + enable_register_id, &value); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } @@ -407,8 +407,8 @@ acpi_status acpi_clear_event(u32 event) * register bit) */ status = - acpi_set_register(acpi_gbl_fixed_event_info[event]. - status_register_id, 1); + acpi_write_bit_register(acpi_gbl_fixed_event_info[event]. + status_register_id, ACPI_CLEAR_STATUS); return_ACPI_STATUS(status); } @@ -495,7 +495,7 @@ acpi_status acpi_get_event_status(u32 event, acpi_event_status * event_status) /* Get the status of the requested fixed event */ status = - acpi_get_register(acpi_gbl_fixed_event_info[event]. + acpi_read_bit_register(acpi_gbl_fixed_event_info[event]. enable_register_id, &value); if (ACPI_FAILURE(status)) return_ACPI_STATUS(status); @@ -503,7 +503,7 @@ acpi_status acpi_get_event_status(u32 event, acpi_event_status * event_status) *event_status = value; status = - acpi_get_register(acpi_gbl_fixed_event_info[event]. + acpi_read_bit_register(acpi_gbl_fixed_event_info[event]. status_register_id, &value); if (ACPI_FAILURE(status)) return_ACPI_STATUS(status); diff --git a/drivers/acpi/acpica/evxfregn.c b/drivers/acpi/acpica/evxfregn.c index 479e7a3721b..7c3d2d356ff 100644 --- a/drivers/acpi/acpica/evxfregn.c +++ b/drivers/acpi/acpica/evxfregn.c @@ -193,7 +193,8 @@ acpi_remove_address_space_handler(acpi_handle device, /* Matched space_id, first dereference this in the Regions */ ACPI_DEBUG_PRINT((ACPI_DB_OPREGION, - "Removing address handler %p(%p) for region %s on Device %p(%p)\n", + "Removing address handler %p(%p) for region %s " + "on Device %p(%p)\n", handler_obj, handler, acpi_ut_get_region_name(space_id), node, obj_desc)); diff --git a/drivers/acpi/acpica/exconfig.c b/drivers/acpi/acpica/exconfig.c index 932bbc26aa0..3deb20a126b 100644 --- a/drivers/acpi/acpica/exconfig.c +++ b/drivers/acpi/acpica/exconfig.c @@ -291,7 +291,7 @@ acpi_ex_load_op(union acpi_operand_object *obj_desc, /* Source Object can be either an op_region or a Buffer/Field */ - switch (ACPI_GET_OBJECT_TYPE(obj_desc)) { + switch (obj_desc->common.type) { case ACPI_TYPE_REGION: ACPI_DEBUG_PRINT((ACPI_DB_EXEC, @@ -501,7 +501,7 @@ acpi_status acpi_ex_unload_table(union acpi_operand_object *ddb_handle) */ if ((!ddb_handle) || (ACPI_GET_DESCRIPTOR_TYPE(ddb_handle) != ACPI_DESC_TYPE_OPERAND) || - (ACPI_GET_OBJECT_TYPE(ddb_handle) != ACPI_TYPE_LOCAL_REFERENCE)) { + (ddb_handle->common.type != ACPI_TYPE_LOCAL_REFERENCE)) { return_ACPI_STATUS(AE_BAD_PARAMETER); } @@ -520,13 +520,14 @@ acpi_status acpi_ex_unload_table(union acpi_operand_object *ddb_handle) } } - /* - * Delete the entire namespace under this table Node - * (Offset contains the table_id) - */ - acpi_tb_delete_namespace_by_owner(table_index); - (void)acpi_tb_release_owner_id(table_index); + /* Delete the portion of the namespace owned by this table */ + + status = acpi_tb_delete_namespace_by_owner(table_index); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + (void)acpi_tb_release_owner_id(table_index); acpi_tb_set_table_loaded_flag(table_index, FALSE); /* Table unloaded, remove a reference to the ddb_handle object */ diff --git a/drivers/acpi/acpica/exconvrt.c b/drivers/acpi/acpica/exconvrt.c index 0be10188316..37d0d39e60a 100644 --- a/drivers/acpi/acpica/exconvrt.c +++ b/drivers/acpi/acpica/exconvrt.c @@ -82,7 +82,7 @@ acpi_ex_convert_to_integer(union acpi_operand_object *obj_desc, ACPI_FUNCTION_TRACE_PTR(ex_convert_to_integer, obj_desc); - switch (ACPI_GET_OBJECT_TYPE(obj_desc)) { + switch (obj_desc->common.type) { case ACPI_TYPE_INTEGER: /* No conversion necessary */ @@ -116,7 +116,7 @@ acpi_ex_convert_to_integer(union acpi_operand_object *obj_desc, /* String conversion is different than Buffer conversion */ - switch (ACPI_GET_OBJECT_TYPE(obj_desc)) { + switch (obj_desc->common.type) { case ACPI_TYPE_STRING: /* @@ -206,7 +206,7 @@ acpi_ex_convert_to_buffer(union acpi_operand_object *obj_desc, ACPI_FUNCTION_TRACE_PTR(ex_convert_to_buffer, obj_desc); - switch (ACPI_GET_OBJECT_TYPE(obj_desc)) { + switch (obj_desc->common.type) { case ACPI_TYPE_BUFFER: /* No conversion necessary */ @@ -409,7 +409,7 @@ acpi_ex_convert_to_string(union acpi_operand_object * obj_desc, ACPI_FUNCTION_TRACE_PTR(ex_convert_to_string, obj_desc); - switch (ACPI_GET_OBJECT_TYPE(obj_desc)) { + switch (obj_desc->common.type) { case ACPI_TYPE_STRING: /* No conversion necessary */ @@ -605,8 +605,7 @@ acpi_ex_convert_to_target_type(acpi_object_type destination_type, default: /* No conversion allowed for these types */ - if (destination_type != - ACPI_GET_OBJECT_TYPE(source_desc)) { + if (destination_type != source_desc->common.type) { ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Explicit operator, will store (%s) over existing type (%s)\n", acpi_ut_get_object_type_name diff --git a/drivers/acpi/acpica/exdump.c b/drivers/acpi/acpica/exdump.c index aa313574b0d..89d141fdae0 100644 --- a/drivers/acpi/acpica/exdump.c +++ b/drivers/acpi/acpica/exdump.c @@ -350,6 +350,7 @@ acpi_ex_dump_object(union acpi_operand_object *obj_desc, break; case ACPI_EXD_TYPE: + acpi_ex_out_string("Type", acpi_ut_get_object_type_name (obj_desc)); @@ -422,6 +423,7 @@ acpi_ex_dump_object(union acpi_operand_object *obj_desc, break; default: + acpi_os_printf("**** Invalid table opcode [%X] ****\n", info->opcode); return; @@ -492,7 +494,7 @@ void acpi_ex_dump_operand(union acpi_operand_object *obj_desc, u32 depth) /* Decode object type */ - switch (ACPI_GET_OBJECT_TYPE(obj_desc)) { + switch (obj_desc->common.type) { case ACPI_TYPE_LOCAL_REFERENCE: acpi_os_printf("Reference: [%s] ", @@ -527,44 +529,16 @@ void acpi_ex_dump_operand(union acpi_operand_object *obj_desc, u32 depth) type)); break; - case ACPI_REFCLASS_ARG: - - acpi_os_printf("%X", obj_desc->reference.value); - - if (ACPI_GET_OBJECT_TYPE(obj_desc) == ACPI_TYPE_INTEGER) { - - /* Value is an Integer */ - - acpi_os_printf(" value is [%8.8X%8.8x]", - ACPI_FORMAT_UINT64(obj_desc-> - integer. - value)); - } + case ACPI_REFCLASS_NAME: - acpi_os_printf("\n"); + acpi_os_printf("- [%4.4s]\n", + obj_desc->reference.node->name.ascii); break; + case ACPI_REFCLASS_ARG: case ACPI_REFCLASS_LOCAL: - acpi_os_printf("%X", obj_desc->reference.value); - - if (ACPI_GET_OBJECT_TYPE(obj_desc) == ACPI_TYPE_INTEGER) { - - /* Value is an Integer */ - - acpi_os_printf(" value is [%8.8X%8.8x]", - ACPI_FORMAT_UINT64(obj_desc-> - integer. - value)); - } - - acpi_os_printf("\n"); - break; - - case ACPI_REFCLASS_NAME: - - acpi_os_printf("- [%4.4s]\n", - obj_desc->reference.node->name.ascii); + acpi_os_printf("%X\n", obj_desc->reference.value); break; default: /* Unknown reference class */ @@ -661,8 +635,8 @@ void acpi_ex_dump_operand(union acpi_operand_object *obj_desc, u32 depth) case ACPI_TYPE_LOCAL_REGION_FIELD: acpi_os_printf - ("RegionField: Bits=%X AccWidth=%X Lock=%X Update=%X at byte=%X bit=%X of below:\n", - obj_desc->field.bit_length, + ("RegionField: Bits=%X AccWidth=%X Lock=%X Update=%X at " + "byte=%X bit=%X of below:\n", obj_desc->field.bit_length, obj_desc->field.access_byte_width, obj_desc->field.field_flags & AML_FIELD_LOCK_RULE_MASK, obj_desc->field.field_flags & AML_FIELD_UPDATE_RULE_MASK, @@ -686,9 +660,8 @@ void acpi_ex_dump_operand(union acpi_operand_object *obj_desc, u32 depth) if (!obj_desc->buffer_field.buffer_obj) { ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "*NULL*\n")); - } else - if (ACPI_GET_OBJECT_TYPE(obj_desc->buffer_field.buffer_obj) - != ACPI_TYPE_BUFFER) { + } else if ((obj_desc->buffer_field.buffer_obj)->common.type != + ACPI_TYPE_BUFFER) { acpi_os_printf("*not a Buffer*\n"); } else { acpi_ex_dump_operand(obj_desc->buffer_field.buffer_obj, @@ -737,8 +710,7 @@ void acpi_ex_dump_operand(union acpi_operand_object *obj_desc, u32 depth) default: /* Unknown Type */ - acpi_os_printf("Unknown Type %X\n", - ACPI_GET_OBJECT_TYPE(obj_desc)); + acpi_os_printf("Unknown Type %X\n", obj_desc->common.type); break; } @@ -939,7 +911,7 @@ acpi_ex_dump_package_obj(union acpi_operand_object *obj_desc, /* Packages may only contain a few object types */ - switch (ACPI_GET_OBJECT_TYPE(obj_desc)) { + switch (obj_desc->common.type) { case ACPI_TYPE_INTEGER: acpi_os_printf("[Integer] = %8.8X%8.8X\n", @@ -990,8 +962,7 @@ acpi_ex_dump_package_obj(union acpi_operand_object *obj_desc, default: - acpi_os_printf("[Unknown Type] %X\n", - ACPI_GET_OBJECT_TYPE(obj_desc)); + acpi_os_printf("[Unknown Type] %X\n", obj_desc->common.type); break; } } diff --git a/drivers/acpi/acpica/exfield.c b/drivers/acpi/acpica/exfield.c index a352d023385..546dcdd8678 100644 --- a/drivers/acpi/acpica/exfield.c +++ b/drivers/acpi/acpica/exfield.c @@ -84,7 +84,7 @@ acpi_ex_read_data_from_field(struct acpi_walk_state *walk_state, return_ACPI_STATUS(AE_BAD_PARAMETER); } - if (ACPI_GET_OBJECT_TYPE(obj_desc) == ACPI_TYPE_BUFFER_FIELD) { + if (obj_desc->common.type == ACPI_TYPE_BUFFER_FIELD) { /* * If the buffer_field arguments have not been previously evaluated, * evaluate them now and save the results. @@ -95,9 +95,8 @@ acpi_ex_read_data_from_field(struct acpi_walk_state *walk_state, return_ACPI_STATUS(status); } } - } else - if ((ACPI_GET_OBJECT_TYPE(obj_desc) == ACPI_TYPE_LOCAL_REGION_FIELD) - && (obj_desc->field.region_obj->region.space_id == + } else if ((obj_desc->common.type == ACPI_TYPE_LOCAL_REGION_FIELD) && + (obj_desc->field.region_obj->region.space_id == ACPI_ADR_SPACE_SMBUS)) { /* * This is an SMBus read. We must create a buffer to hold the data @@ -163,7 +162,7 @@ acpi_ex_read_data_from_field(struct acpi_walk_state *walk_state, ACPI_DEBUG_PRINT((ACPI_DB_BFIELD, "FieldRead [TO]: Obj %p, Type %X, Buf %p, ByteLen %X\n", - obj_desc, ACPI_GET_OBJECT_TYPE(obj_desc), buffer, + obj_desc, obj_desc->common.type, buffer, (u32) length)); ACPI_DEBUG_PRINT((ACPI_DB_BFIELD, "FieldRead [FROM]: BitLen %X, BitOff %X, ByteOff %X\n", @@ -222,7 +221,7 @@ acpi_ex_write_data_to_field(union acpi_operand_object *source_desc, return_ACPI_STATUS(AE_AML_NO_OPERAND); } - if (ACPI_GET_OBJECT_TYPE(obj_desc) == ACPI_TYPE_BUFFER_FIELD) { + if (obj_desc->common.type == ACPI_TYPE_BUFFER_FIELD) { /* * If the buffer_field arguments have not been previously evaluated, * evaluate them now and save the results. @@ -233,9 +232,8 @@ acpi_ex_write_data_to_field(union acpi_operand_object *source_desc, return_ACPI_STATUS(status); } } - } else - if ((ACPI_GET_OBJECT_TYPE(obj_desc) == ACPI_TYPE_LOCAL_REGION_FIELD) - && (obj_desc->field.region_obj->region.space_id == + } else if ((obj_desc->common.type == ACPI_TYPE_LOCAL_REGION_FIELD) && + (obj_desc->field.region_obj->region.space_id == ACPI_ADR_SPACE_SMBUS)) { /* * This is an SMBus write. We will bypass the entire field mechanism @@ -243,7 +241,7 @@ acpi_ex_write_data_to_field(union acpi_operand_object *source_desc, * * Source must be a buffer of sufficient size (ACPI_SMBUS_BUFFER_SIZE). */ - if (ACPI_GET_OBJECT_TYPE(source_desc) != ACPI_TYPE_BUFFER) { + if (source_desc->common.type != ACPI_TYPE_BUFFER) { ACPI_ERROR((AE_INFO, "SMBus write requires Buffer, found type %s", acpi_ut_get_object_type_name(source_desc))); @@ -291,7 +289,7 @@ acpi_ex_write_data_to_field(union acpi_operand_object *source_desc, /* Get a pointer to the data to be written */ - switch (ACPI_GET_OBJECT_TYPE(source_desc)) { + switch (source_desc->common.type) { case ACPI_TYPE_INTEGER: buffer = &source_desc->integer.value; length = sizeof(source_desc->integer.value); @@ -314,15 +312,14 @@ acpi_ex_write_data_to_field(union acpi_operand_object *source_desc, ACPI_DEBUG_PRINT((ACPI_DB_BFIELD, "FieldWrite [FROM]: Obj %p (%s:%X), Buf %p, ByteLen %X\n", source_desc, - acpi_ut_get_type_name(ACPI_GET_OBJECT_TYPE - (source_desc)), - ACPI_GET_OBJECT_TYPE(source_desc), buffer, length)); + acpi_ut_get_type_name(source_desc->common.type), + source_desc->common.type, buffer, length)); ACPI_DEBUG_PRINT((ACPI_DB_BFIELD, "FieldWrite [TO]: Obj %p (%s:%X), BitLen %X, BitOff %X, ByteOff %X\n", obj_desc, - acpi_ut_get_type_name(ACPI_GET_OBJECT_TYPE(obj_desc)), - ACPI_GET_OBJECT_TYPE(obj_desc), + acpi_ut_get_type_name(obj_desc->common.type), + obj_desc->common.type, obj_desc->common_field.bit_length, obj_desc->common_field.start_field_bit_offset, obj_desc->common_field.base_byte_offset)); diff --git a/drivers/acpi/acpica/exfldio.c b/drivers/acpi/acpica/exfldio.c index ef58ac4e687..99cee61e655 100644 --- a/drivers/acpi/acpica/exfldio.c +++ b/drivers/acpi/acpica/exfldio.c @@ -94,9 +94,9 @@ acpi_ex_setup_region(union acpi_operand_object *obj_desc, /* We must have a valid region */ - if (ACPI_GET_OBJECT_TYPE(rgn_desc) != ACPI_TYPE_REGION) { + if (rgn_desc->common.type != ACPI_TYPE_REGION) { ACPI_ERROR((AE_INFO, "Needed Region, found type %X (%s)", - ACPI_GET_OBJECT_TYPE(rgn_desc), + rgn_desc->common.type, acpi_ut_get_object_type_name(rgn_desc))); return_ACPI_STATUS(AE_AML_OPERAND_TYPE); @@ -113,12 +113,6 @@ acpi_ex_setup_region(union acpi_operand_object *obj_desc, } } - /* Exit if Address/Length have been disallowed by the host OS */ - - if (rgn_desc->common.flags & AOPOBJ_INVALID) { - return_ACPI_STATUS(AE_AML_ILLEGAL_ADDRESS); - } - /* * Exit now for SMBus address space, it has a non-linear address space * and the request cannot be directly validated @@ -390,7 +384,7 @@ acpi_ex_field_datum_io(union acpi_operand_object *obj_desc, * index_field - Write to an Index Register, then read/write from/to a * Data Register */ - switch (ACPI_GET_OBJECT_TYPE(obj_desc)) { + switch (obj_desc->common.type) { case ACPI_TYPE_BUFFER_FIELD: /* * If the buffer_field arguments have not been previously evaluated, @@ -527,7 +521,7 @@ acpi_ex_field_datum_io(union acpi_operand_object *obj_desc, default: ACPI_ERROR((AE_INFO, "Wrong object type in field I/O %X", - ACPI_GET_OBJECT_TYPE(obj_desc))); + obj_desc->common.type)); status = AE_AML_INTERNAL; break; } diff --git a/drivers/acpi/acpica/exmisc.c b/drivers/acpi/acpica/exmisc.c index 6b0747ac683..998eac32993 100644 --- a/drivers/acpi/acpica/exmisc.c +++ b/drivers/acpi/acpica/exmisc.c @@ -80,7 +80,7 @@ acpi_ex_get_object_reference(union acpi_operand_object *obj_desc, switch (ACPI_GET_DESCRIPTOR_TYPE(obj_desc)) { case ACPI_DESC_TYPE_OPERAND: - if (ACPI_GET_OBJECT_TYPE(obj_desc) != ACPI_TYPE_LOCAL_REFERENCE) { + if (obj_desc->common.type != ACPI_TYPE_LOCAL_REFERENCE) { return_ACPI_STATUS(AE_AML_OPERAND_TYPE); } @@ -260,7 +260,7 @@ acpi_ex_do_concatenate(union acpi_operand_object *operand0, * guaranteed to be either Integer/String/Buffer by the operand * resolution mechanism. */ - switch (ACPI_GET_OBJECT_TYPE(operand0)) { + switch (operand0->common.type) { case ACPI_TYPE_INTEGER: status = acpi_ex_convert_to_integer(operand1, &local_operand1, 16); @@ -277,7 +277,7 @@ acpi_ex_do_concatenate(union acpi_operand_object *operand0, default: ACPI_ERROR((AE_INFO, "Invalid object type: %X", - ACPI_GET_OBJECT_TYPE(operand0))); + operand0->common.type)); status = AE_AML_INTERNAL; } @@ -298,7 +298,7 @@ acpi_ex_do_concatenate(union acpi_operand_object *operand0, * 2) Two Strings concatenated to produce a new String * 3) Two Buffers concatenated to produce a new Buffer */ - switch (ACPI_GET_OBJECT_TYPE(operand0)) { + switch (operand0->common.type) { case ACPI_TYPE_INTEGER: /* Result of two Integers is a Buffer */ @@ -379,7 +379,7 @@ acpi_ex_do_concatenate(union acpi_operand_object *operand0, /* Invalid object type, should not happen here */ ACPI_ERROR((AE_INFO, "Invalid object type: %X", - ACPI_GET_OBJECT_TYPE(operand0))); + operand0->common.type)); status = AE_AML_INTERNAL; goto cleanup; } @@ -581,7 +581,7 @@ acpi_ex_do_logical_op(u16 opcode, * guaranteed to be either Integer/String/Buffer by the operand * resolution mechanism. */ - switch (ACPI_GET_OBJECT_TYPE(operand0)) { + switch (operand0->common.type) { case ACPI_TYPE_INTEGER: status = acpi_ex_convert_to_integer(operand1, &local_operand1, 16); @@ -608,7 +608,7 @@ acpi_ex_do_logical_op(u16 opcode, /* * Two cases: 1) Both Integers, 2) Both Strings or Buffers */ - if (ACPI_GET_OBJECT_TYPE(operand0) == ACPI_TYPE_INTEGER) { + if (operand0->common.type == ACPI_TYPE_INTEGER) { /* * 1) Both operands are of type integer * Note: local_operand1 may have changed above diff --git a/drivers/acpi/acpica/exoparg1.c b/drivers/acpi/acpica/exoparg1.c index b530480cc7d..9635d21e568 100644 --- a/drivers/acpi/acpica/exoparg1.c +++ b/drivers/acpi/acpica/exoparg1.c @@ -807,11 +807,9 @@ acpi_status acpi_ex_opcode_1A_0T_1R(struct acpi_walk_state *walk_state) acpi_namespace_node *) operand[0]); if (temp_desc - && - ((ACPI_GET_OBJECT_TYPE(temp_desc) == - ACPI_TYPE_STRING) - || (ACPI_GET_OBJECT_TYPE(temp_desc) == - ACPI_TYPE_LOCAL_REFERENCE))) { + && ((temp_desc->common.type == ACPI_TYPE_STRING) + || (temp_desc->common.type == + ACPI_TYPE_LOCAL_REFERENCE))) { operand[0] = temp_desc; acpi_ut_add_reference(temp_desc); } else { @@ -819,7 +817,7 @@ acpi_status acpi_ex_opcode_1A_0T_1R(struct acpi_walk_state *walk_state) goto cleanup; } } else { - switch (ACPI_GET_OBJECT_TYPE(operand[0])) { + switch ((operand[0])->common.type) { case ACPI_TYPE_LOCAL_REFERENCE: /* * This is a deref_of (local_x | arg_x) @@ -877,8 +875,7 @@ acpi_status acpi_ex_opcode_1A_0T_1R(struct acpi_walk_state *walk_state) if (ACPI_GET_DESCRIPTOR_TYPE(operand[0]) != ACPI_DESC_TYPE_NAMED) { - if (ACPI_GET_OBJECT_TYPE(operand[0]) == - ACPI_TYPE_STRING) { + if ((operand[0])->common.type == ACPI_TYPE_STRING) { /* * This is a deref_of (String). The string is a reference * to a named ACPI object. diff --git a/drivers/acpi/acpica/exoparg2.c b/drivers/acpi/acpica/exoparg2.c index 0b4f513ca88..85d95c92dfd 100644 --- a/drivers/acpi/acpica/exoparg2.c +++ b/drivers/acpi/acpica/exoparg2.c @@ -399,7 +399,7 @@ acpi_status acpi_ex_opcode_2A_1T_1R(struct acpi_walk_state *walk_state) * At this point, the Source operand is a String, Buffer, or Package. * Verify that the index is within range. */ - switch (ACPI_GET_OBJECT_TYPE(operand[0])) { + switch ((operand[0])->common.type) { case ACPI_TYPE_STRING: if (index >= operand[0]->string.length) { diff --git a/drivers/acpi/acpica/exoparg3.c b/drivers/acpi/acpica/exoparg3.c index c6520bbf882..253f9e12258 100644 --- a/drivers/acpi/acpica/exoparg3.c +++ b/drivers/acpi/acpica/exoparg3.c @@ -161,9 +161,8 @@ acpi_status acpi_ex_opcode_3A_1T_1R(struct acpi_walk_state *walk_state) * Create the return object. The Source operand is guaranteed to be * either a String or a Buffer, so just use its type. */ - return_desc = - acpi_ut_create_internal_object(ACPI_GET_OBJECT_TYPE - (operand[0])); + return_desc = acpi_ut_create_internal_object((operand[0])-> + common.type); if (!return_desc) { status = AE_NO_MEMORY; goto cleanup; @@ -191,7 +190,7 @@ acpi_status acpi_ex_opcode_3A_1T_1R(struct acpi_walk_state *walk_state) /* Strings always have a sub-pointer, not so for buffers */ - switch (ACPI_GET_OBJECT_TYPE(operand[0])) { + switch ((operand[0])->common.type) { case ACPI_TYPE_STRING: /* Always allocate a new buffer for the String */ diff --git a/drivers/acpi/acpica/exprep.c b/drivers/acpi/acpica/exprep.c index a226f74d4a5..52fec07064f 100644 --- a/drivers/acpi/acpica/exprep.c +++ b/drivers/acpi/acpica/exprep.c @@ -279,7 +279,7 @@ acpi_ex_decode_field_access(union acpi_operand_object *obj_desc, return_UINT32(0); } - if (ACPI_GET_OBJECT_TYPE(obj_desc) == ACPI_TYPE_BUFFER_FIELD) { + if (obj_desc->common.type == ACPI_TYPE_BUFFER_FIELD) { /* * buffer_field access can be on any byte boundary, so the * byte_alignment is always 1 byte -- regardless of any byte_alignment diff --git a/drivers/acpi/acpica/exregion.c b/drivers/acpi/acpica/exregion.c index 76ec8ff903b..3a54b737d2d 100644 --- a/drivers/acpi/acpica/exregion.c +++ b/drivers/acpi/acpica/exregion.c @@ -294,14 +294,14 @@ acpi_ex_system_io_space_handler(u32 function, switch (function) { case ACPI_READ: - status = acpi_os_read_port((acpi_io_address) address, + status = acpi_hw_read_port((acpi_io_address) address, &value32, bit_width); *value = value32; break; case ACPI_WRITE: - status = acpi_os_write_port((acpi_io_address) address, + status = acpi_hw_write_port((acpi_io_address) address, (u32) * value, bit_width); break; diff --git a/drivers/acpi/acpica/exresnte.c b/drivers/acpi/acpica/exresnte.c index a063a74006f..607958ff467 100644 --- a/drivers/acpi/acpica/exresnte.c +++ b/drivers/acpi/acpica/exresnte.c @@ -136,7 +136,7 @@ acpi_ex_resolve_node_to_value(struct acpi_namespace_node **object_ptr, switch (entry_type) { case ACPI_TYPE_PACKAGE: - if (ACPI_GET_OBJECT_TYPE(source_desc) != ACPI_TYPE_PACKAGE) { + if (source_desc->common.type != ACPI_TYPE_PACKAGE) { ACPI_ERROR((AE_INFO, "Object not a Package, type %s", acpi_ut_get_object_type_name(source_desc))); return_ACPI_STATUS(AE_AML_OPERAND_TYPE); @@ -154,7 +154,7 @@ acpi_ex_resolve_node_to_value(struct acpi_namespace_node **object_ptr, case ACPI_TYPE_BUFFER: - if (ACPI_GET_OBJECT_TYPE(source_desc) != ACPI_TYPE_BUFFER) { + if (source_desc->common.type != ACPI_TYPE_BUFFER) { ACPI_ERROR((AE_INFO, "Object not a Buffer, type %s", acpi_ut_get_object_type_name(source_desc))); return_ACPI_STATUS(AE_AML_OPERAND_TYPE); @@ -172,7 +172,7 @@ acpi_ex_resolve_node_to_value(struct acpi_namespace_node **object_ptr, case ACPI_TYPE_STRING: - if (ACPI_GET_OBJECT_TYPE(source_desc) != ACPI_TYPE_STRING) { + if (source_desc->common.type != ACPI_TYPE_STRING) { ACPI_ERROR((AE_INFO, "Object not a String, type %s", acpi_ut_get_object_type_name(source_desc))); return_ACPI_STATUS(AE_AML_OPERAND_TYPE); @@ -186,7 +186,7 @@ acpi_ex_resolve_node_to_value(struct acpi_namespace_node **object_ptr, case ACPI_TYPE_INTEGER: - if (ACPI_GET_OBJECT_TYPE(source_desc) != ACPI_TYPE_INTEGER) { + if (source_desc->common.type != ACPI_TYPE_INTEGER) { ACPI_ERROR((AE_INFO, "Object not a Integer, type %s", acpi_ut_get_object_type_name(source_desc))); return_ACPI_STATUS(AE_AML_OPERAND_TYPE); diff --git a/drivers/acpi/acpica/exresolv.c b/drivers/acpi/acpica/exresolv.c index f6105a6d612..c93b54ce7f7 100644 --- a/drivers/acpi/acpica/exresolv.c +++ b/drivers/acpi/acpica/exresolv.c @@ -149,7 +149,7 @@ acpi_ex_resolve_object_to_value(union acpi_operand_object **stack_ptr, /* This is a union acpi_operand_object */ - switch (ACPI_GET_OBJECT_TYPE(stack_desc)) { + switch (stack_desc->common.type) { case ACPI_TYPE_LOCAL_REFERENCE: ref_type = stack_desc->reference.class; @@ -297,8 +297,7 @@ acpi_ex_resolve_object_to_value(union acpi_operand_object **stack_ptr, ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "FieldRead SourceDesc=%p Type=%X\n", - stack_desc, - ACPI_GET_OBJECT_TYPE(stack_desc))); + stack_desc, stack_desc->common.type)); status = acpi_ex_read_data_from_field(walk_state, stack_desc, @@ -386,7 +385,7 @@ acpi_ex_resolve_multiple(struct acpi_walk_state *walk_state, * specification of the object_type and size_of operators). This means * traversing the list of possibly many nested references. */ - while (ACPI_GET_OBJECT_TYPE(obj_desc) == ACPI_TYPE_LOCAL_REFERENCE) { + while (obj_desc->common.type == ACPI_TYPE_LOCAL_REFERENCE) { switch (obj_desc->reference.class) { case ACPI_REFCLASS_REFOF: case ACPI_REFCLASS_NAME: @@ -518,7 +517,7 @@ acpi_ex_resolve_multiple(struct acpi_walk_state *walk_state, * Now we are guaranteed to have an object that has not been created * via the ref_of or Index operators. */ - type = ACPI_GET_OBJECT_TYPE(obj_desc); + type = obj_desc->common.type; exit: /* Convert internal types to external types */ diff --git a/drivers/acpi/acpica/exresop.c b/drivers/acpi/acpica/exresop.c index 3c3802764bf..5c729a9e913 100644 --- a/drivers/acpi/acpica/exresop.c +++ b/drivers/acpi/acpica/exresop.c @@ -212,7 +212,7 @@ acpi_ex_resolve_operands(u16 opcode, /* ACPI internal object */ - object_type = ACPI_GET_OBJECT_TYPE(obj_desc); + object_type = obj_desc->common.type; /* Check for bad acpi_object_type */ @@ -287,8 +287,7 @@ acpi_ex_resolve_operands(u16 opcode, if ((ACPI_GET_DESCRIPTOR_TYPE(obj_desc) == ACPI_DESC_TYPE_OPERAND) - && (ACPI_GET_OBJECT_TYPE(obj_desc) == - ACPI_TYPE_STRING)) { + && (obj_desc->common.type == ACPI_TYPE_STRING)) { /* * String found - the string references a named object and * must be resolved to a node @@ -336,7 +335,7 @@ acpi_ex_resolve_operands(u16 opcode, * -- All others must be resolved below. */ if ((opcode == AML_STORE_OP) && - (ACPI_GET_OBJECT_TYPE(*stack_ptr) == + ((*stack_ptr)->common.type == ACPI_TYPE_LOCAL_REFERENCE) && ((*stack_ptr)->reference.class == ACPI_REFCLASS_INDEX)) { goto next_operand; @@ -490,7 +489,7 @@ acpi_ex_resolve_operands(u16 opcode, /* Need an operand of type INTEGER, STRING or BUFFER */ - switch (ACPI_GET_OBJECT_TYPE(obj_desc)) { + switch (obj_desc->common.type) { case ACPI_TYPE_INTEGER: case ACPI_TYPE_STRING: case ACPI_TYPE_BUFFER: @@ -512,7 +511,7 @@ acpi_ex_resolve_operands(u16 opcode, /* Need an operand of type STRING or BUFFER */ - switch (ACPI_GET_OBJECT_TYPE(obj_desc)) { + switch (obj_desc->common.type) { case ACPI_TYPE_STRING: case ACPI_TYPE_BUFFER: @@ -553,7 +552,7 @@ acpi_ex_resolve_operands(u16 opcode, * The only reference allowed here is a direct reference to * a namespace node. */ - switch (ACPI_GET_OBJECT_TYPE(obj_desc)) { + switch (obj_desc->common.type) { case ACPI_TYPE_PACKAGE: case ACPI_TYPE_STRING: case ACPI_TYPE_BUFFER: @@ -576,7 +575,7 @@ acpi_ex_resolve_operands(u16 opcode, /* Need a buffer or package or (ACPI 2.0) String */ - switch (ACPI_GET_OBJECT_TYPE(obj_desc)) { + switch (obj_desc->common.type) { case ACPI_TYPE_PACKAGE: case ACPI_TYPE_STRING: case ACPI_TYPE_BUFFER: @@ -598,7 +597,7 @@ acpi_ex_resolve_operands(u16 opcode, /* Need an operand of type REGION or a BUFFER (which could be a resolved region field) */ - switch (ACPI_GET_OBJECT_TYPE(obj_desc)) { + switch (obj_desc->common.type) { case ACPI_TYPE_BUFFER: case ACPI_TYPE_REGION: @@ -619,7 +618,7 @@ acpi_ex_resolve_operands(u16 opcode, /* Used by the Store() operator only */ - switch (ACPI_GET_OBJECT_TYPE(obj_desc)) { + switch (obj_desc->common.type) { case ACPI_TYPE_INTEGER: case ACPI_TYPE_PACKAGE: case ACPI_TYPE_STRING: @@ -677,8 +676,8 @@ acpi_ex_resolve_operands(u16 opcode, * required object type (Simple cases only). */ status = acpi_ex_check_object_type(type_needed, - ACPI_GET_OBJECT_TYPE - (*stack_ptr), *stack_ptr); + (*stack_ptr)->common.type, + *stack_ptr); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } diff --git a/drivers/acpi/acpica/exstore.c b/drivers/acpi/acpica/exstore.c index e35e9b4f6a4..90d606196c9 100644 --- a/drivers/acpi/acpica/exstore.c +++ b/drivers/acpi/acpica/exstore.c @@ -129,7 +129,7 @@ acpi_ex_do_debug_object(union acpi_operand_object *source_desc, /* source_desc is of type ACPI_DESC_TYPE_OPERAND */ - switch (ACPI_GET_OBJECT_TYPE(source_desc)) { + switch (source_desc->common.type) { case ACPI_TYPE_INTEGER: /* Output correct integer width */ @@ -324,7 +324,7 @@ acpi_ex_store(union acpi_operand_object *source_desc, /* Destination object must be a Reference or a Constant object */ - switch (ACPI_GET_OBJECT_TYPE(dest_desc)) { + switch (dest_desc->common.type) { case ACPI_TYPE_LOCAL_REFERENCE: break; @@ -460,9 +460,8 @@ acpi_ex_store_object_to_index(union acpi_operand_object *source_desc, */ obj_desc = *(index_desc->reference.where); - if (ACPI_GET_OBJECT_TYPE(source_desc) == - ACPI_TYPE_LOCAL_REFERENCE - && source_desc->reference.class == ACPI_REFCLASS_TABLE) { + if (source_desc->common.type == ACPI_TYPE_LOCAL_REFERENCE && + source_desc->reference.class == ACPI_REFCLASS_TABLE) { /* This is a DDBHandle, just add a reference to it */ @@ -520,8 +519,8 @@ acpi_ex_store_object_to_index(union acpi_operand_object *source_desc, * by the INDEX_OP code. */ obj_desc = index_desc->reference.object; - if ((ACPI_GET_OBJECT_TYPE(obj_desc) != ACPI_TYPE_BUFFER) && - (ACPI_GET_OBJECT_TYPE(obj_desc) != ACPI_TYPE_STRING)) { + if ((obj_desc->common.type != ACPI_TYPE_BUFFER) && + (obj_desc->common.type != ACPI_TYPE_STRING)) { return_ACPI_STATUS(AE_AML_OPERAND_TYPE); } @@ -529,7 +528,7 @@ acpi_ex_store_object_to_index(union acpi_operand_object *source_desc, * The assignment of the individual elements will be slightly * different for each source type. */ - switch (ACPI_GET_OBJECT_TYPE(source_desc)) { + switch (source_desc->common.type) { case ACPI_TYPE_INTEGER: /* Use the least-significant byte of the integer */ @@ -707,8 +706,7 @@ acpi_ex_store_object_to_node(union acpi_operand_object *source_desc, /* No conversions for all other types. Just attach the source object */ status = acpi_ns_attach_object(node, source_desc, - ACPI_GET_OBJECT_TYPE - (source_desc)); + source_desc->common.type); break; } diff --git a/drivers/acpi/acpica/exstoren.c b/drivers/acpi/acpica/exstoren.c index 145d15305f7..608e838d537 100644 --- a/drivers/acpi/acpica/exstoren.c +++ b/drivers/acpi/acpica/exstoren.c @@ -96,8 +96,7 @@ acpi_ex_resolve_object(union acpi_operand_object **source_desc_ptr, * are all essentially the same. This case handles the * "interchangeable" types Integer, String, and Buffer. */ - if (ACPI_GET_OBJECT_TYPE(source_desc) == - ACPI_TYPE_LOCAL_REFERENCE) { + if (source_desc->common.type == ACPI_TYPE_LOCAL_REFERENCE) { /* Resolve a reference object first */ @@ -117,13 +116,11 @@ acpi_ex_resolve_object(union acpi_operand_object **source_desc_ptr, /* Must have a Integer, Buffer, or String */ - if ((ACPI_GET_OBJECT_TYPE(source_desc) != ACPI_TYPE_INTEGER) && - (ACPI_GET_OBJECT_TYPE(source_desc) != ACPI_TYPE_BUFFER) && - (ACPI_GET_OBJECT_TYPE(source_desc) != ACPI_TYPE_STRING) && - !((ACPI_GET_OBJECT_TYPE(source_desc) == - ACPI_TYPE_LOCAL_REFERENCE) - && (source_desc->reference.class == - ACPI_REFCLASS_TABLE))) { + if ((source_desc->common.type != ACPI_TYPE_INTEGER) && + (source_desc->common.type != ACPI_TYPE_BUFFER) && + (source_desc->common.type != ACPI_TYPE_STRING) && + !((source_desc->common.type == ACPI_TYPE_LOCAL_REFERENCE) && + (source_desc->reference.class == ACPI_REFCLASS_TABLE))) { /* Conversion successful but still not a valid type */ @@ -218,8 +215,7 @@ acpi_ex_store_object_to_object(union acpi_operand_object *source_desc, return_ACPI_STATUS(status); } - if (ACPI_GET_OBJECT_TYPE(source_desc) != - ACPI_GET_OBJECT_TYPE(dest_desc)) { + if (source_desc->common.type != dest_desc->common.type) { /* * The source type does not match the type of the destination. * Perform the "implicit conversion" of the source to the current type @@ -229,11 +225,10 @@ acpi_ex_store_object_to_object(union acpi_operand_object *source_desc, * Otherwise, actual_src_desc is a temporary object to hold the * converted object. */ - status = - acpi_ex_convert_to_target_type(ACPI_GET_OBJECT_TYPE - (dest_desc), source_desc, - &actual_src_desc, - walk_state); + status = acpi_ex_convert_to_target_type(dest_desc->common.type, + source_desc, + &actual_src_desc, + walk_state); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } @@ -252,7 +247,7 @@ acpi_ex_store_object_to_object(union acpi_operand_object *source_desc, * We now have two objects of identical types, and we can perform a * copy of the *value* of the source object. */ - switch (ACPI_GET_OBJECT_TYPE(dest_desc)) { + switch (dest_desc->common.type) { case ACPI_TYPE_INTEGER: dest_desc->integer.value = actual_src_desc->integer.value; diff --git a/drivers/acpi/acpica/exutils.c b/drivers/acpi/acpica/exutils.c index 32b85d68e75..87730e94413 100644 --- a/drivers/acpi/acpica/exutils.c +++ b/drivers/acpi/acpica/exutils.c @@ -221,7 +221,7 @@ void acpi_ex_truncate_for32bit_table(union acpi_operand_object *obj_desc) */ if ((!obj_desc) || (ACPI_GET_DESCRIPTOR_TYPE(obj_desc) != ACPI_DESC_TYPE_OPERAND) || - (ACPI_GET_OBJECT_TYPE(obj_desc) != ACPI_TYPE_INTEGER)) { + (obj_desc->common.type != ACPI_TYPE_INTEGER)) { return; } diff --git a/drivers/acpi/acpica/hwacpi.c b/drivers/acpi/acpica/hwacpi.c index a9d4fea4167..9af361a191e 100644 --- a/drivers/acpi/acpica/hwacpi.c +++ b/drivers/acpi/acpica/hwacpi.c @@ -86,7 +86,8 @@ acpi_status acpi_hw_set_mode(u32 mode) */ if (!acpi_gbl_FADT.acpi_enable && !acpi_gbl_FADT.acpi_disable) { ACPI_ERROR((AE_INFO, - "No ACPI mode transition supported in this system (enable/disable both zero)")); + "No ACPI mode transition supported in this system " + "(enable/disable both zero)")); return_ACPI_STATUS(AE_OK); } @@ -95,7 +96,7 @@ acpi_status acpi_hw_set_mode(u32 mode) /* BIOS should have disabled ALL fixed and GP events */ - status = acpi_os_write_port(acpi_gbl_FADT.smi_command, + status = acpi_hw_write_port(acpi_gbl_FADT.smi_command, (u32) acpi_gbl_FADT.acpi_enable, 8); ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Attempting to enable ACPI mode\n")); @@ -107,7 +108,7 @@ acpi_status acpi_hw_set_mode(u32 mode) * BIOS should clear all fixed status bits and restore fixed event * enable bits to default */ - status = acpi_os_write_port(acpi_gbl_FADT.smi_command, + status = acpi_hw_write_port(acpi_gbl_FADT.smi_command, (u32) acpi_gbl_FADT.acpi_disable, 8); ACPI_DEBUG_PRINT((ACPI_DB_INFO, @@ -172,7 +173,7 @@ u32 acpi_hw_get_mode(void) return_UINT32(ACPI_SYS_MODE_ACPI); } - status = acpi_get_register(ACPI_BITREG_SCI_ENABLE, &value); + status = acpi_read_bit_register(ACPI_BITREG_SCI_ENABLE, &value); if (ACPI_FAILURE(status)) { return_UINT32(ACPI_SYS_MODE_LEGACY); } diff --git a/drivers/acpi/acpica/hwgpe.c b/drivers/acpi/acpica/hwgpe.c index 2013b66745d..d3b7e37c9ee 100644 --- a/drivers/acpi/acpica/hwgpe.c +++ b/drivers/acpi/acpica/hwgpe.c @@ -89,10 +89,9 @@ acpi_status acpi_hw_low_disable_gpe(struct acpi_gpe_event_info *gpe_event_info) /* Clear just the bit that corresponds to this GPE */ - ACPI_CLEAR_BIT(enable_mask, - ((u32) 1 << - (gpe_event_info->gpe_number - - gpe_register_info->base_gpe_number))); + ACPI_CLEAR_BIT(enable_mask, ((u32)1 << + (gpe_event_info->gpe_number - + gpe_register_info->base_gpe_number))); /* Write the updated enable mask */ @@ -156,10 +155,9 @@ acpi_status acpi_hw_clear_gpe(struct acpi_gpe_event_info * gpe_event_info) ACPI_FUNCTION_ENTRY(); - register_bit = (u8) - (1 << - (gpe_event_info->gpe_number - - gpe_event_info->register_info->base_gpe_number)); + register_bit = (u8)(1 << + (gpe_event_info->gpe_number - + gpe_event_info->register_info->base_gpe_number)); /* * Write a one to the appropriate bit in the status register to @@ -206,10 +204,9 @@ acpi_hw_get_gpe_status(struct acpi_gpe_event_info * gpe_event_info, /* Get the register bitmask for this GPE */ - register_bit = (u8) - (1 << - (gpe_event_info->gpe_number - - gpe_event_info->register_info->base_gpe_number)); + register_bit = (u8)(1 << + (gpe_event_info->gpe_number - + gpe_event_info->register_info->base_gpe_number)); /* GPE currently enabled? (enabled for runtime?) */ diff --git a/drivers/acpi/acpica/hwregs.c b/drivers/acpi/acpica/hwregs.c index 4dc43b01851..7b2fb602b5c 100644 --- a/drivers/acpi/acpica/hwregs.c +++ b/drivers/acpi/acpica/hwregs.c @@ -51,6 +51,17 @@ #define _COMPONENT ACPI_HARDWARE ACPI_MODULE_NAME("hwregs") +/* Local Prototypes */ +static acpi_status +acpi_hw_read_multiple(u32 *value, + struct acpi_generic_address *register_a, + struct acpi_generic_address *register_b); + +static acpi_status +acpi_hw_write_multiple(u32 value, + struct acpi_generic_address *register_a, + struct acpi_generic_address *register_b); + /******************************************************************************* * * FUNCTION: acpi_hw_clear_acpi_status @@ -60,9 +71,9 @@ ACPI_MODULE_NAME("hwregs") * RETURN: Status * * DESCRIPTION: Clears all fixed and general purpose status bits - * THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED * ******************************************************************************/ + acpi_status acpi_hw_clear_acpi_status(void) { acpi_status status; @@ -70,28 +81,20 @@ acpi_status acpi_hw_clear_acpi_status(void) ACPI_FUNCTION_TRACE(hw_clear_acpi_status); - ACPI_DEBUG_PRINT((ACPI_DB_IO, "About to write %04X to %04X\n", + ACPI_DEBUG_PRINT((ACPI_DB_IO, "About to write %04X to %0llX\n", ACPI_BITMASK_ALL_FIXED_STATUS, - (u16) acpi_gbl_FADT.xpm1a_event_block.address)); + acpi_gbl_xpm1a_status.address)); lock_flags = acpi_os_acquire_lock(acpi_gbl_hardware_lock); + /* Clear the fixed events in PM1 A/B */ + status = acpi_hw_register_write(ACPI_REGISTER_PM1_STATUS, ACPI_BITMASK_ALL_FIXED_STATUS); if (ACPI_FAILURE(status)) { goto unlock_and_exit; } - /* Clear the fixed events */ - - if (acpi_gbl_FADT.xpm1b_event_block.address) { - status = acpi_write(ACPI_BITMASK_ALL_FIXED_STATUS, - &acpi_gbl_FADT.xpm1b_event_block); - if (ACPI_FAILURE(status)) { - goto unlock_and_exit; - } - } - /* Clear the GPE Bits in all GPE registers in all GPE blocks */ status = acpi_ev_walk_gpe_list(acpi_hw_clear_gpe_block, NULL); @@ -128,6 +131,42 @@ struct acpi_bit_register_info *acpi_hw_get_bit_register_info(u32 register_id) /****************************************************************************** * + * FUNCTION: acpi_hw_write_pm1_control + * + * PARAMETERS: pm1a_control - Value to be written to PM1A control + * pm1b_control - Value to be written to PM1B control + * + * RETURN: Status + * + * DESCRIPTION: Write the PM1 A/B control registers. These registers are + * different than than the PM1 A/B status and enable registers + * in that different values can be written to the A/B registers. + * Most notably, the SLP_TYP bits can be different, as per the + * values returned from the _Sx predefined methods. + * + ******************************************************************************/ + +acpi_status acpi_hw_write_pm1_control(u32 pm1a_control, u32 pm1b_control) +{ + acpi_status status; + + ACPI_FUNCTION_TRACE(hw_write_pm1_control); + + status = acpi_write(pm1a_control, &acpi_gbl_FADT.xpm1a_control_block); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + if (acpi_gbl_FADT.xpm1b_control_block.address) { + status = + acpi_write(pm1b_control, + &acpi_gbl_FADT.xpm1b_control_block); + } + return_ACPI_STATUS(status); +} + +/****************************************************************************** + * * FUNCTION: acpi_hw_register_read * * PARAMETERS: register_id - ACPI Register ID @@ -141,64 +180,56 @@ struct acpi_bit_register_info *acpi_hw_get_bit_register_info(u32 register_id) acpi_status acpi_hw_register_read(u32 register_id, u32 * return_value) { - u32 value1 = 0; - u32 value2 = 0; + u32 value = 0; acpi_status status; ACPI_FUNCTION_TRACE(hw_register_read); switch (register_id) { - case ACPI_REGISTER_PM1_STATUS: /* 16-bit access */ - - status = acpi_read(&value1, &acpi_gbl_FADT.xpm1a_event_block); - if (ACPI_FAILURE(status)) { - goto exit; - } - - /* PM1B is optional */ + case ACPI_REGISTER_PM1_STATUS: /* PM1 A/B: 16-bit access each */ - status = acpi_read(&value2, &acpi_gbl_FADT.xpm1b_event_block); - value1 |= value2; + status = acpi_hw_read_multiple(&value, + &acpi_gbl_xpm1a_status, + &acpi_gbl_xpm1b_status); break; - case ACPI_REGISTER_PM1_ENABLE: /* 16-bit access */ + case ACPI_REGISTER_PM1_ENABLE: /* PM1 A/B: 16-bit access each */ - status = acpi_read(&value1, &acpi_gbl_xpm1a_enable); - if (ACPI_FAILURE(status)) { - goto exit; - } - - /* PM1B is optional */ - - status = acpi_read(&value2, &acpi_gbl_xpm1b_enable); - value1 |= value2; + status = acpi_hw_read_multiple(&value, + &acpi_gbl_xpm1a_enable, + &acpi_gbl_xpm1b_enable); break; - case ACPI_REGISTER_PM1_CONTROL: /* 16-bit access */ + case ACPI_REGISTER_PM1_CONTROL: /* PM1 A/B: 16-bit access each */ - status = acpi_read(&value1, &acpi_gbl_FADT.xpm1a_control_block); - if (ACPI_FAILURE(status)) { - goto exit; - } + status = acpi_hw_read_multiple(&value, + &acpi_gbl_FADT. + xpm1a_control_block, + &acpi_gbl_FADT. + xpm1b_control_block); - status = acpi_read(&value2, &acpi_gbl_FADT.xpm1b_control_block); - value1 |= value2; + /* + * Zero the write-only bits. From the ACPI specification, "Hardware + * Write-Only Bits": "Upon reads to registers with write-only bits, + * software masks out all write-only bits." + */ + value &= ~ACPI_PM1_CONTROL_WRITEONLY_BITS; break; case ACPI_REGISTER_PM2_CONTROL: /* 8-bit access */ - status = acpi_read(&value1, &acpi_gbl_FADT.xpm2_control_block); + status = acpi_read(&value, &acpi_gbl_FADT.xpm2_control_block); break; case ACPI_REGISTER_PM_TIMER: /* 32-bit access */ - status = acpi_read(&value1, &acpi_gbl_FADT.xpm_timer_block); + status = acpi_read(&value, &acpi_gbl_FADT.xpm_timer_block); break; case ACPI_REGISTER_SMI_COMMAND_BLOCK: /* 8-bit access */ status = - acpi_os_read_port(acpi_gbl_FADT.smi_command, &value1, 8); + acpi_hw_read_port(acpi_gbl_FADT.smi_command, &value, 8); break; default: @@ -207,10 +238,8 @@ acpi_hw_register_read(u32 register_id, u32 * return_value) break; } - exit: - if (ACPI_SUCCESS(status)) { - *return_value = value1; + *return_value = value; } return_ACPI_STATUS(status); @@ -250,52 +279,42 @@ acpi_status acpi_hw_register_write(u32 register_id, u32 value) ACPI_FUNCTION_TRACE(hw_register_write); switch (register_id) { - case ACPI_REGISTER_PM1_STATUS: /* 16-bit access */ - - /* Perform a read first to preserve certain bits (per ACPI spec) */ - - status = acpi_hw_register_read(ACPI_REGISTER_PM1_STATUS, - &read_value); - if (ACPI_FAILURE(status)) { - goto exit; - } - - /* Insert the bits to be preserved */ - - ACPI_INSERT_BITS(value, ACPI_PM1_STATUS_PRESERVED_BITS, - read_value); - - /* Now we can write the data */ - - status = acpi_write(value, &acpi_gbl_FADT.xpm1a_event_block); - if (ACPI_FAILURE(status)) { - goto exit; - } - - /* PM1B is optional */ + case ACPI_REGISTER_PM1_STATUS: /* PM1 A/B: 16-bit access each */ + /* + * Handle the "ignored" bit in PM1 Status. According to the ACPI + * specification, ignored bits are to be preserved when writing. + * Normally, this would mean a read/modify/write sequence. However, + * preserving a bit in the status register is different. Writing a + * one clears the status, and writing a zero preserves the status. + * Therefore, we must always write zero to the ignored bit. + * + * This behavior is clarified in the ACPI 4.0 specification. + */ + value &= ~ACPI_PM1_STATUS_PRESERVED_BITS; - status = acpi_write(value, &acpi_gbl_FADT.xpm1b_event_block); + status = acpi_hw_write_multiple(value, + &acpi_gbl_xpm1a_status, + &acpi_gbl_xpm1b_status); break; - case ACPI_REGISTER_PM1_ENABLE: /* 16-bit access */ + case ACPI_REGISTER_PM1_ENABLE: /* PM1 A/B: 16-bit access */ - status = acpi_write(value, &acpi_gbl_xpm1a_enable); - if (ACPI_FAILURE(status)) { - goto exit; - } - - /* PM1B is optional */ - - status = acpi_write(value, &acpi_gbl_xpm1b_enable); + status = acpi_hw_write_multiple(value, + &acpi_gbl_xpm1a_enable, + &acpi_gbl_xpm1b_enable); break; - case ACPI_REGISTER_PM1_CONTROL: /* 16-bit access */ + case ACPI_REGISTER_PM1_CONTROL: /* PM1 A/B: 16-bit access each */ /* * Perform a read first to preserve certain bits (per ACPI spec) + * Note: This includes SCI_EN, we never want to change this bit */ - status = acpi_hw_register_read(ACPI_REGISTER_PM1_CONTROL, - &read_value); + status = acpi_hw_read_multiple(&read_value, + &acpi_gbl_FADT. + xpm1a_control_block, + &acpi_gbl_FADT. + xpm1b_control_block); if (ACPI_FAILURE(status)) { goto exit; } @@ -307,25 +326,29 @@ acpi_status acpi_hw_register_write(u32 register_id, u32 value) /* Now we can write the data */ - status = acpi_write(value, &acpi_gbl_FADT.xpm1a_control_block); - if (ACPI_FAILURE(status)) { - goto exit; - } - - status = acpi_write(value, &acpi_gbl_FADT.xpm1b_control_block); + status = acpi_hw_write_multiple(value, + &acpi_gbl_FADT. + xpm1a_control_block, + &acpi_gbl_FADT. + xpm1b_control_block); break; - case ACPI_REGISTER_PM1A_CONTROL: /* 16-bit access */ - - status = acpi_write(value, &acpi_gbl_FADT.xpm1a_control_block); - break; + case ACPI_REGISTER_PM2_CONTROL: /* 8-bit access */ - case ACPI_REGISTER_PM1B_CONTROL: /* 16-bit access */ + /* + * For control registers, all reserved bits must be preserved, + * as per the ACPI spec. + */ + status = + acpi_read(&read_value, &acpi_gbl_FADT.xpm2_control_block); + if (ACPI_FAILURE(status)) { + goto exit; + } - status = acpi_write(value, &acpi_gbl_FADT.xpm1b_control_block); - break; + /* Insert the bits to be preserved */ - case ACPI_REGISTER_PM2_CONTROL: /* 8-bit access */ + ACPI_INSERT_BITS(value, ACPI_PM2_CONTROL_PRESERVED_BITS, + read_value); status = acpi_write(value, &acpi_gbl_FADT.xpm2_control_block); break; @@ -340,10 +363,11 @@ acpi_status acpi_hw_register_write(u32 register_id, u32 value) /* SMI_CMD is currently always in IO space */ status = - acpi_os_write_port(acpi_gbl_FADT.smi_command, value, 8); + acpi_hw_write_port(acpi_gbl_FADT.smi_command, value, 8); break; default: + ACPI_ERROR((AE_INFO, "Unknown Register ID: %X", register_id)); status = AE_BAD_PARAMETER; break; } @@ -351,3 +375,103 @@ acpi_status acpi_hw_register_write(u32 register_id, u32 value) exit: return_ACPI_STATUS(status); } + +/****************************************************************************** + * + * FUNCTION: acpi_hw_read_multiple + * + * PARAMETERS: Value - Where the register value is returned + * register_a - First ACPI register (required) + * register_b - Second ACPI register (optional) + * + * RETURN: Status + * + * DESCRIPTION: Read from the specified two-part ACPI register (such as PM1 A/B) + * + ******************************************************************************/ + +static acpi_status +acpi_hw_read_multiple(u32 *value, + struct acpi_generic_address *register_a, + struct acpi_generic_address *register_b) +{ + u32 value_a = 0; + u32 value_b = 0; + acpi_status status; + + /* The first register is always required */ + + status = acpi_read(&value_a, register_a); + if (ACPI_FAILURE(status)) { + return (status); + } + + /* Second register is optional */ + + if (register_b->address) { + status = acpi_read(&value_b, register_b); + if (ACPI_FAILURE(status)) { + return (status); + } + } + + /* + * OR the two return values together. No shifting or masking is necessary, + * because of how the PM1 registers are defined in the ACPI specification: + * + * "Although the bits can be split between the two register blocks (each + * register block has a unique pointer within the FADT), the bit positions + * are maintained. The register block with unimplemented bits (that is, + * those implemented in the other register block) always returns zeros, + * and writes have no side effects" + */ + *value = (value_a | value_b); + return (AE_OK); +} + +/****************************************************************************** + * + * FUNCTION: acpi_hw_write_multiple + * + * PARAMETERS: Value - The value to write + * register_a - First ACPI register (required) + * register_b - Second ACPI register (optional) + * + * RETURN: Status + * + * DESCRIPTION: Write to the specified two-part ACPI register (such as PM1 A/B) + * + ******************************************************************************/ + +static acpi_status +acpi_hw_write_multiple(u32 value, + struct acpi_generic_address *register_a, + struct acpi_generic_address *register_b) +{ + acpi_status status; + + /* The first register is always required */ + + status = acpi_write(value, register_a); + if (ACPI_FAILURE(status)) { + return (status); + } + + /* + * Second register is optional + * + * No bit shifting or clearing is necessary, because of how the PM1 + * registers are defined in the ACPI specification: + * + * "Although the bits can be split between the two register blocks (each + * register block has a unique pointer within the FADT), the bit positions + * are maintained. The register block with unimplemented bits (that is, + * those implemented in the other register block) always returns zeros, + * and writes have no side effects" + */ + if (register_b->address) { + status = acpi_write(value, register_b); + } + + return (status); +} diff --git a/drivers/acpi/acpica/hwsleep.c b/drivers/acpi/acpica/hwsleep.c index a2af2a4f2f2..db307a356f0 100644 --- a/drivers/acpi/acpica/hwsleep.c +++ b/drivers/acpi/acpica/hwsleep.c @@ -90,6 +90,7 @@ acpi_set_firmware_waking_vector(u32 physical_address) ACPI_EXPORT_SYMBOL(acpi_set_firmware_waking_vector) +#if ACPI_MACHINE_WIDTH == 64 /******************************************************************************* * * FUNCTION: acpi_set_firmware_waking_vector64 @@ -100,7 +101,8 @@ ACPI_EXPORT_SYMBOL(acpi_set_firmware_waking_vector) * RETURN: Status * * DESCRIPTION: Sets the 64-bit X_firmware_waking_vector field of the FACS, if - * it exists in the table. + * it exists in the table. This function is intended for use with + * 64-bit host operating systems. * ******************************************************************************/ acpi_status @@ -124,6 +126,7 @@ acpi_set_firmware_waking_vector64(u64 physical_address) } ACPI_EXPORT_SYMBOL(acpi_set_firmware_waking_vector64) +#endif /******************************************************************************* * @@ -147,9 +150,8 @@ acpi_status acpi_enter_sleep_state_prep(u8 sleep_state) ACPI_FUNCTION_TRACE(acpi_enter_sleep_state_prep); - /* - * _PSW methods could be run here to enable wake-on keyboard, LAN, etc. - */ + /* _PSW methods could be run here to enable wake-on keyboard, LAN, etc. */ + status = acpi_get_sleep_type_data(sleep_state, &acpi_gbl_sleep_type_a, &acpi_gbl_sleep_type_b); @@ -209,6 +211,12 @@ acpi_status acpi_enter_sleep_state_prep(u8 sleep_state) ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_prep) +static unsigned int gts, bfs; +module_param(gts, uint, 0644); +module_param(bfs, uint, 0644); +MODULE_PARM_DESC(gts, "Enable evaluation of _GTS on suspend."); +MODULE_PARM_DESC(bfs, "Enable evaluation of _BFS on resume".); + /******************************************************************************* * * FUNCTION: acpi_enter_sleep_state @@ -223,8 +231,8 @@ ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_prep) ******************************************************************************/ acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state) { - u32 PM1Acontrol; - u32 PM1Bcontrol; + u32 pm1a_control; + u32 pm1b_control; struct acpi_bit_register_info *sleep_type_reg_info; struct acpi_bit_register_info *sleep_enable_reg_info; u32 in_value; @@ -242,13 +250,14 @@ acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state) } sleep_type_reg_info = - acpi_hw_get_bit_register_info(ACPI_BITREG_SLEEP_TYPE_A); + acpi_hw_get_bit_register_info(ACPI_BITREG_SLEEP_TYPE); sleep_enable_reg_info = acpi_hw_get_bit_register_info(ACPI_BITREG_SLEEP_ENABLE); /* Clear wake status */ - status = acpi_set_register(ACPI_BITREG_WAKE_STATUS, 1); + status = + acpi_write_bit_register(ACPI_BITREG_WAKE_STATUS, ACPI_CLEAR_STATUS); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } @@ -275,38 +284,41 @@ acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state) return_ACPI_STATUS(status); } - /* Execute the _GTS method */ + if (gts) { + /* Execute the _GTS method */ - arg_list.count = 1; - arg_list.pointer = &arg; - arg.type = ACPI_TYPE_INTEGER; - arg.integer.value = sleep_state; + arg_list.count = 1; + arg_list.pointer = &arg; + arg.type = ACPI_TYPE_INTEGER; + arg.integer.value = sleep_state; - status = acpi_evaluate_object(NULL, METHOD_NAME__GTS, &arg_list, NULL); - if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { - return_ACPI_STATUS(status); + status = acpi_evaluate_object(NULL, METHOD_NAME__GTS, &arg_list, NULL); + if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { + return_ACPI_STATUS(status); + } } /* Get current value of PM1A control */ - status = acpi_hw_register_read(ACPI_REGISTER_PM1_CONTROL, &PM1Acontrol); + status = acpi_hw_register_read(ACPI_REGISTER_PM1_CONTROL, + &pm1a_control); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } ACPI_DEBUG_PRINT((ACPI_DB_INIT, "Entering sleep state [S%d]\n", sleep_state)); - /* Clear SLP_EN and SLP_TYP fields */ + /* Clear the SLP_EN and SLP_TYP fields */ - PM1Acontrol &= ~(sleep_type_reg_info->access_bit_mask | - sleep_enable_reg_info->access_bit_mask); - PM1Bcontrol = PM1Acontrol; + pm1a_control &= ~(sleep_type_reg_info->access_bit_mask | + sleep_enable_reg_info->access_bit_mask); + pm1b_control = pm1a_control; - /* Insert SLP_TYP bits */ + /* Insert the SLP_TYP bits */ - PM1Acontrol |= + pm1a_control |= (acpi_gbl_sleep_type_a << sleep_type_reg_info->bit_position); - PM1Bcontrol |= + pm1b_control |= (acpi_gbl_sleep_type_b << sleep_type_reg_info->bit_position); /* @@ -314,37 +326,25 @@ acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state) * poorly implemented hardware. */ - /* Write #1: fill in SLP_TYP data */ + /* Write #1: write the SLP_TYP data to the PM1 Control registers */ - status = acpi_hw_register_write(ACPI_REGISTER_PM1A_CONTROL, - PM1Acontrol); + status = acpi_hw_write_pm1_control(pm1a_control, pm1b_control); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } - status = acpi_hw_register_write(ACPI_REGISTER_PM1B_CONTROL, - PM1Bcontrol); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - /* Insert SLP_ENABLE bit */ + /* Insert the sleep enable (SLP_EN) bit */ - PM1Acontrol |= sleep_enable_reg_info->access_bit_mask; - PM1Bcontrol |= sleep_enable_reg_info->access_bit_mask; + pm1a_control |= sleep_enable_reg_info->access_bit_mask; + pm1b_control |= sleep_enable_reg_info->access_bit_mask; - /* Write #2: SLP_TYP + SLP_EN */ + /* Flush caches, as per ACPI specification */ ACPI_FLUSH_CPU_CACHE(); - status = acpi_hw_register_write(ACPI_REGISTER_PM1A_CONTROL, - PM1Acontrol); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } + /* Write #2: Write both SLP_TYP + SLP_EN */ - status = acpi_hw_register_write(ACPI_REGISTER_PM1B_CONTROL, - PM1Bcontrol); + status = acpi_hw_write_pm1_control(pm1a_control, pm1b_control); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } @@ -357,8 +357,8 @@ acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state) * Wait ten seconds, then try again. This is to get S4/S5 to work on * all machines. * - * We wait so long to allow chipsets that poll this reg very slowly to - * still read the right value. Ideally, this block would go + * We wait so long to allow chipsets that poll this reg very slowly + * to still read the right value. Ideally, this block would go * away entirely. */ acpi_os_stall(10000000); @@ -374,7 +374,7 @@ acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state) /* Wait until we enter sleep state */ do { - status = acpi_get_register_unlocked(ACPI_BITREG_WAKE_STATUS, + status = acpi_read_bit_register(ACPI_BITREG_WAKE_STATUS, &in_value); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); @@ -408,7 +408,10 @@ acpi_status asmlinkage acpi_enter_sleep_state_s4bios(void) ACPI_FUNCTION_TRACE(acpi_enter_sleep_state_s4bios); - status = acpi_set_register(ACPI_BITREG_WAKE_STATUS, 1); + /* Clear the wake status bit (PM1) */ + + status = + acpi_write_bit_register(ACPI_BITREG_WAKE_STATUS, ACPI_CLEAR_STATUS); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } @@ -435,12 +438,13 @@ acpi_status asmlinkage acpi_enter_sleep_state_s4bios(void) ACPI_FLUSH_CPU_CACHE(); - status = acpi_os_write_port(acpi_gbl_FADT.smi_command, + status = acpi_hw_write_port(acpi_gbl_FADT.smi_command, (u32) acpi_gbl_FADT.S4bios_request, 8); do { acpi_os_stall(1000); - status = acpi_get_register(ACPI_BITREG_WAKE_STATUS, &in_value); + status = + acpi_read_bit_register(ACPI_BITREG_WAKE_STATUS, &in_value); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } @@ -471,8 +475,8 @@ acpi_status acpi_leave_sleep_state_prep(u8 sleep_state) acpi_status status; struct acpi_bit_register_info *sleep_type_reg_info; struct acpi_bit_register_info *sleep_enable_reg_info; - u32 PM1Acontrol; - u32 PM1Bcontrol; + u32 pm1a_control; + u32 pm1b_control; ACPI_FUNCTION_TRACE(acpi_leave_sleep_state_prep); @@ -486,53 +490,50 @@ acpi_status acpi_leave_sleep_state_prep(u8 sleep_state) &acpi_gbl_sleep_type_b); if (ACPI_SUCCESS(status)) { sleep_type_reg_info = - acpi_hw_get_bit_register_info(ACPI_BITREG_SLEEP_TYPE_A); + acpi_hw_get_bit_register_info(ACPI_BITREG_SLEEP_TYPE); sleep_enable_reg_info = acpi_hw_get_bit_register_info(ACPI_BITREG_SLEEP_ENABLE); /* Get current value of PM1A control */ status = acpi_hw_register_read(ACPI_REGISTER_PM1_CONTROL, - &PM1Acontrol); + &pm1a_control); if (ACPI_SUCCESS(status)) { - /* Clear SLP_EN and SLP_TYP fields */ + /* Clear the SLP_EN and SLP_TYP fields */ - PM1Acontrol &= ~(sleep_type_reg_info->access_bit_mask | - sleep_enable_reg_info-> - access_bit_mask); - PM1Bcontrol = PM1Acontrol; + pm1a_control &= ~(sleep_type_reg_info->access_bit_mask | + sleep_enable_reg_info-> + access_bit_mask); + pm1b_control = pm1a_control; - /* Insert SLP_TYP bits */ + /* Insert the SLP_TYP bits */ - PM1Acontrol |= - (acpi_gbl_sleep_type_a << sleep_type_reg_info-> - bit_position); - PM1Bcontrol |= - (acpi_gbl_sleep_type_b << sleep_type_reg_info-> - bit_position); + pm1a_control |= (acpi_gbl_sleep_type_a << + sleep_type_reg_info->bit_position); + pm1b_control |= (acpi_gbl_sleep_type_b << + sleep_type_reg_info->bit_position); - /* Just ignore any errors */ + /* Write the control registers and ignore any errors */ - (void)acpi_hw_register_write(ACPI_REGISTER_PM1A_CONTROL, - PM1Acontrol); - (void)acpi_hw_register_write(ACPI_REGISTER_PM1B_CONTROL, - PM1Bcontrol); + (void)acpi_hw_write_pm1_control(pm1a_control, + pm1b_control); } } - /* Execute the _BFS method */ + if (bfs) { + /* Execute the _BFS method */ - arg_list.count = 1; - arg_list.pointer = &arg; - arg.type = ACPI_TYPE_INTEGER; - arg.integer.value = sleep_state; + arg_list.count = 1; + arg_list.pointer = &arg; + arg.type = ACPI_TYPE_INTEGER; + arg.integer.value = sleep_state; - status = acpi_evaluate_object(NULL, METHOD_NAME__BFS, &arg_list, NULL); - if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { - ACPI_EXCEPTION((AE_INFO, status, "During Method _BFS")); + status = acpi_evaluate_object(NULL, METHOD_NAME__BFS, &arg_list, NULL); + if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { + ACPI_EXCEPTION((AE_INFO, status, "During Method _BFS")); + } } - return_ACPI_STATUS(status); } @@ -603,19 +604,21 @@ acpi_status acpi_leave_sleep_state(u8 sleep_state) * it to determine whether the system is rebooting or resuming. Clear * it for compatibility. */ - acpi_set_register(ACPI_BITREG_WAKE_STATUS, 1); + acpi_write_bit_register(ACPI_BITREG_WAKE_STATUS, 1); acpi_gbl_system_awake_and_running = TRUE; /* Enable power button */ (void) - acpi_set_register(acpi_gbl_fixed_event_info - [ACPI_EVENT_POWER_BUTTON].enable_register_id, 1); + acpi_write_bit_register(acpi_gbl_fixed_event_info + [ACPI_EVENT_POWER_BUTTON]. + enable_register_id, ACPI_ENABLE_EVENT); (void) - acpi_set_register(acpi_gbl_fixed_event_info - [ACPI_EVENT_POWER_BUTTON].status_register_id, 1); + acpi_write_bit_register(acpi_gbl_fixed_event_info + [ACPI_EVENT_POWER_BUTTON]. + status_register_id, ACPI_CLEAR_STATUS); arg.integer.value = ACPI_SST_WORKING; status = acpi_evaluate_object(NULL, METHOD_NAME__SST, &arg_list, NULL); diff --git a/drivers/acpi/acpica/hwvalid.c b/drivers/acpi/acpica/hwvalid.c new file mode 100644 index 00000000000..ec33f270c5b --- /dev/null +++ b/drivers/acpi/acpica/hwvalid.c @@ -0,0 +1,315 @@ + +/****************************************************************************** + * + * Module Name: hwvalid - I/O request validation + * + *****************************************************************************/ + +/* + * Copyright (C) 2000 - 2009, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include <acpi/acpi.h> +#include "accommon.h" + +#define _COMPONENT ACPI_HARDWARE +ACPI_MODULE_NAME("hwvalid") + +/* Local prototypes */ +static acpi_status +acpi_hw_validate_io_request(acpi_io_address address, u32 bit_width); + +/* + * Protected I/O ports. Some ports are always illegal, and some are + * conditionally illegal. This table must remain ordered by port address. + * + * The table is used to implement the Microsoft port access rules that + * first appeared in Windows XP. Some ports are always illegal, and some + * ports are only illegal if the BIOS calls _OSI with a win_xP string or + * later (meaning that the BIOS itelf is post-XP.) + * + * This provides ACPICA with the desired port protections and + * Microsoft compatibility. + * + * Description of port entries: + * DMA: DMA controller + * PIC0: Programmable Interrupt Controller (8259_a) + * PIT1: System Timer 1 + * PIT2: System Timer 2 failsafe + * RTC: Real-time clock + * CMOS: Extended CMOS + * DMA1: DMA 1 page registers + * DMA1L: DMA 1 Ch 0 low page + * DMA2: DMA 2 page registers + * DMA2L: DMA 2 low page refresh + * ARBC: Arbitration control + * SETUP: Reserved system board setup + * POS: POS channel select + * PIC1: Cascaded PIC + * IDMA: ISA DMA + * ELCR: PIC edge/level registers + * PCI: PCI configuration space + */ +static const struct acpi_port_info acpi_protected_ports[] = { + {"DMA", 0x0000, 0x000F, ACPI_OSI_WIN_XP}, + {"PIC0", 0x0020, 0x0021, ACPI_ALWAYS_ILLEGAL}, + {"PIT1", 0x0040, 0x0043, ACPI_OSI_WIN_XP}, + {"PIT2", 0x0048, 0x004B, ACPI_OSI_WIN_XP}, + {"RTC", 0x0070, 0x0071, ACPI_OSI_WIN_XP}, + {"CMOS", 0x0074, 0x0076, ACPI_OSI_WIN_XP}, + {"DMA1", 0x0081, 0x0083, ACPI_OSI_WIN_XP}, + {"DMA1L", 0x0087, 0x0087, ACPI_OSI_WIN_XP}, + {"DMA2", 0x0089, 0x008B, ACPI_OSI_WIN_XP}, + {"DMA2L", 0x008F, 0x008F, ACPI_OSI_WIN_XP}, + {"ARBC", 0x0090, 0x0091, ACPI_OSI_WIN_XP}, + {"SETUP", 0x0093, 0x0094, ACPI_OSI_WIN_XP}, + {"POS", 0x0096, 0x0097, ACPI_OSI_WIN_XP}, + {"PIC1", 0x00A0, 0x00A1, ACPI_ALWAYS_ILLEGAL}, + {"IDMA", 0x00C0, 0x00DF, ACPI_OSI_WIN_XP}, + {"ELCR", 0x04D0, 0x04D1, ACPI_ALWAYS_ILLEGAL}, + {"PCI", 0x0CF8, 0x0CFF, ACPI_OSI_WIN_XP} +}; + +#define ACPI_PORT_INFO_ENTRIES ACPI_ARRAY_LENGTH (acpi_protected_ports) + +/****************************************************************************** + * + * FUNCTION: acpi_hw_validate_io_request + * + * PARAMETERS: Address Address of I/O port/register + * bit_width Number of bits (8,16,32) + * + * RETURN: Status + * + * DESCRIPTION: Validates an I/O request (address/length). Certain ports are + * always illegal and some ports are only illegal depending on + * the requests the BIOS AML code makes to the predefined + * _OSI method. + * + ******************************************************************************/ + +static acpi_status +acpi_hw_validate_io_request(acpi_io_address address, u32 bit_width) +{ + u32 i; + u32 byte_width; + acpi_io_address last_address; + const struct acpi_port_info *port_info; + + ACPI_FUNCTION_TRACE(hw_validate_io_request); + + /* Supported widths are 8/16/32 */ + + if ((bit_width != 8) && (bit_width != 16) && (bit_width != 32)) { + return AE_BAD_PARAMETER; + } + + port_info = acpi_protected_ports; + byte_width = ACPI_DIV_8(bit_width); + last_address = address + byte_width - 1; + + ACPI_DEBUG_PRINT((ACPI_DB_IO, "Address %p LastAddress %p Length %X", + ACPI_CAST_PTR(void, address), ACPI_CAST_PTR(void, + last_address), + byte_width)); + + /* Maximum 16-bit address in I/O space */ + + if (last_address > ACPI_UINT16_MAX) { + ACPI_ERROR((AE_INFO, + "Illegal I/O port address/length above 64K: 0x%p/%X", + ACPI_CAST_PTR(void, address), byte_width)); + return_ACPI_STATUS(AE_LIMIT); + } + + /* Exit if requested address is not within the protected port table */ + + if (address > acpi_protected_ports[ACPI_PORT_INFO_ENTRIES - 1].end) { + return_ACPI_STATUS(AE_OK); + } + + /* Check request against the list of protected I/O ports */ + + for (i = 0; i < ACPI_PORT_INFO_ENTRIES; i++, port_info++) { + /* + * Check if the requested address range will write to a reserved + * port. Four cases to consider: + * + * 1) Address range is contained completely in the port address range + * 2) Address range overlaps port range at the port range start + * 3) Address range overlaps port range at the port range end + * 4) Address range completely encompasses the port range + */ + if ((address <= port_info->end) + && (last_address >= port_info->start)) { + + /* Port illegality may depend on the _OSI calls made by the BIOS */ + + if (acpi_gbl_osi_data >= port_info->osi_dependency) { + ACPI_DEBUG_PRINT((ACPI_DB_IO, + "Denied AML access to port 0x%p/%X (%s 0x%.4X-0x%.4X)", + ACPI_CAST_PTR(void, address), + byte_width, port_info->name, + port_info->start, + port_info->end)); + + return_ACPI_STATUS(AE_AML_ILLEGAL_ADDRESS); + } + } + + /* Finished if address range ends before the end of this port */ + + if (last_address <= port_info->end) { + break; + } + } + + return_ACPI_STATUS(AE_OK); +} + +/****************************************************************************** + * + * FUNCTION: acpi_hw_read_port + * + * PARAMETERS: Address Address of I/O port/register to read + * Value Where value is placed + * Width Number of bits + * + * RETURN: Status and value read from port + * + * DESCRIPTION: Read data from an I/O port or register. This is a front-end + * to acpi_os_read_port that performs validation on both the port + * address and the length. + * + *****************************************************************************/ + +acpi_status acpi_hw_read_port(acpi_io_address address, u32 *value, u32 width) +{ + acpi_status status; + u32 one_byte; + u32 i; + + /* Validate the entire request and perform the I/O */ + + status = acpi_hw_validate_io_request(address, width); + if (ACPI_SUCCESS(status)) { + status = acpi_os_read_port(address, value, width); + return status; + } + + if (status != AE_AML_ILLEGAL_ADDRESS) { + return status; + } + + /* + * There has been a protection violation within the request. Fall + * back to byte granularity port I/O and ignore the failing bytes. + * This provides Windows compatibility. + */ + for (i = 0, *value = 0; i < width; i += 8) { + + /* Validate and read one byte */ + + if (acpi_hw_validate_io_request(address, 8) == AE_OK) { + status = acpi_os_read_port(address, &one_byte, 8); + if (ACPI_FAILURE(status)) { + return status; + } + + *value |= (one_byte << i); + } + + address++; + } + + return AE_OK; +} + +/****************************************************************************** + * + * FUNCTION: acpi_hw_write_port + * + * PARAMETERS: Address Address of I/O port/register to write + * Value Value to write + * Width Number of bits + * + * RETURN: Status + * + * DESCRIPTION: Write data to an I/O port or register. This is a front-end + * to acpi_os_write_port that performs validation on both the port + * address and the length. + * + *****************************************************************************/ + +acpi_status acpi_hw_write_port(acpi_io_address address, u32 value, u32 width) +{ + acpi_status status; + u32 i; + + /* Validate the entire request and perform the I/O */ + + status = acpi_hw_validate_io_request(address, width); + if (ACPI_SUCCESS(status)) { + status = acpi_os_write_port(address, value, width); + return status; + } + + if (status != AE_AML_ILLEGAL_ADDRESS) { + return status; + } + + /* + * There has been a protection violation within the request. Fall + * back to byte granularity port I/O and ignore the failing bytes. + * This provides Windows compatibility. + */ + for (i = 0; i < width; i += 8) { + + /* Validate and write one byte */ + + if (acpi_hw_validate_io_request(address, 8) == AE_OK) { + status = + acpi_os_write_port(address, (value >> i) & 0xFF, 8); + if (ACPI_FAILURE(status)) { + return status; + } + } + + address++; + } + + return AE_OK; +} diff --git a/drivers/acpi/acpica/hwxface.c b/drivers/acpi/acpica/hwxface.c index ae597c0ab53..9829979f2bd 100644 --- a/drivers/acpi/acpica/hwxface.c +++ b/drivers/acpi/acpica/hwxface.c @@ -107,19 +107,18 @@ acpi_status acpi_read(u32 *value, struct acpi_generic_address *reg) ACPI_FUNCTION_NAME(acpi_read); /* - * Must have a valid pointer to a GAS structure, and - * a non-zero address within. However, don't return an error - * because the PM1A/B code must not fail if B isn't present. + * Must have a valid pointer to a GAS structure, and a non-zero address + * within. */ if (!reg) { - return (AE_OK); + return (AE_BAD_PARAMETER); } /* Get a local copy of the address. Handles possible alignment issues */ ACPI_MOVE_64_TO_64(&address, ®->address); if (!address) { - return (AE_OK); + return (AE_BAD_ADDRESS); } /* Supported widths are 8/16/32 */ @@ -134,8 +133,8 @@ acpi_status acpi_read(u32 *value, struct acpi_generic_address *reg) *value = 0; /* - * Two address spaces supported: Memory or IO. - * PCI_Config is not supported here because the GAS struct is insufficient + * Two address spaces supported: Memory or IO. PCI_Config is + * not supported here because the GAS structure is insufficient */ switch (reg->space_id) { case ACPI_ADR_SPACE_SYSTEM_MEMORY: @@ -147,7 +146,7 @@ acpi_status acpi_read(u32 *value, struct acpi_generic_address *reg) case ACPI_ADR_SPACE_SYSTEM_IO: status = - acpi_os_read_port((acpi_io_address) address, value, width); + acpi_hw_read_port((acpi_io_address) address, value, width); break; default: @@ -187,19 +186,18 @@ acpi_status acpi_write(u32 value, struct acpi_generic_address *reg) ACPI_FUNCTION_NAME(acpi_write); /* - * Must have a valid pointer to a GAS structure, and - * a non-zero address within. However, don't return an error - * because the PM1A/B code must not fail if B isn't present. + * Must have a valid pointer to a GAS structure, and a non-zero address + * within. */ if (!reg) { - return (AE_OK); + return (AE_BAD_PARAMETER); } /* Get a local copy of the address. Handles possible alignment issues */ ACPI_MOVE_64_TO_64(&address, ®->address); if (!address) { - return (AE_OK); + return (AE_BAD_ADDRESS); } /* Supported widths are 8/16/32 */ @@ -222,7 +220,7 @@ acpi_status acpi_write(u32 value, struct acpi_generic_address *reg) case ACPI_ADR_SPACE_SYSTEM_IO: - status = acpi_os_write_port((acpi_io_address) address, value, + status = acpi_hw_write_port((acpi_io_address) address, value, width); break; @@ -244,24 +242,36 @@ ACPI_EXPORT_SYMBOL(acpi_write) /******************************************************************************* * - * FUNCTION: acpi_get_register_unlocked + * FUNCTION: acpi_read_bit_register * - * PARAMETERS: register_id - ID of ACPI bit_register to access - * return_value - Value that was read from the register + * PARAMETERS: register_id - ID of ACPI Bit Register to access + * return_value - Value that was read from the register, + * normalized to bit position zero. * - * RETURN: Status and the value read from specified Register. Value + * RETURN: Status and the value read from the specified Register. Value * returned is normalized to bit0 (is shifted all the way right) * * DESCRIPTION: ACPI bit_register read function. Does not acquire the HW lock. * + * SUPPORTS: Bit fields in PM1 Status, PM1 Enable, PM1 Control, and + * PM2 Control. + * + * Note: The hardware lock is not required when reading the ACPI bit registers + * since almost all of them are single bit and it does not matter that + * the parent hardware register can be split across two physical + * registers. The only multi-bit field is SLP_TYP in the PM1 control + * register, but this field does not cross an 8-bit boundary (nor does + * it make much sense to actually read this field.) + * ******************************************************************************/ -acpi_status acpi_get_register_unlocked(u32 register_id, u32 *return_value) +acpi_status acpi_read_bit_register(u32 register_id, u32 *return_value) { - u32 register_value = 0; struct acpi_bit_register_info *bit_reg_info; + u32 register_value; + u32 value; acpi_status status; - ACPI_FUNCTION_TRACE(acpi_get_register_unlocked); + ACPI_FUNCTION_TRACE_U32(acpi_read_bit_register, register_id); /* Get the info structure corresponding to the requested ACPI Register */ @@ -270,209 +280,133 @@ acpi_status acpi_get_register_unlocked(u32 register_id, u32 *return_value) return_ACPI_STATUS(AE_BAD_PARAMETER); } - /* Read from the register */ + /* Read the entire parent register */ status = acpi_hw_register_read(bit_reg_info->parent_register, ®ister_value); - - if (ACPI_SUCCESS(status)) { - - /* Normalize the value that was read */ - - register_value = - ((register_value & bit_reg_info->access_bit_mask) - >> bit_reg_info->bit_position); - - *return_value = register_value; - - ACPI_DEBUG_PRINT((ACPI_DB_IO, "Read value %8.8X register %X\n", - register_value, - bit_reg_info->parent_register)); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); } - return_ACPI_STATUS(status); -} + /* Normalize the value that was read, mask off other bits */ -ACPI_EXPORT_SYMBOL(acpi_get_register_unlocked) + value = ((register_value & bit_reg_info->access_bit_mask) + >> bit_reg_info->bit_position); -/******************************************************************************* - * - * FUNCTION: acpi_get_register - * - * PARAMETERS: register_id - ID of ACPI bit_register to access - * return_value - Value that was read from the register - * - * RETURN: Status and the value read from specified Register. Value - * returned is normalized to bit0 (is shifted all the way right) - * - * DESCRIPTION: ACPI bit_register read function. - * - ******************************************************************************/ -acpi_status acpi_get_register(u32 register_id, u32 *return_value) -{ - acpi_status status; - acpi_cpu_flags flags; - - flags = acpi_os_acquire_lock(acpi_gbl_hardware_lock); - status = acpi_get_register_unlocked(register_id, return_value); - acpi_os_release_lock(acpi_gbl_hardware_lock, flags); + ACPI_DEBUG_PRINT((ACPI_DB_IO, + "BitReg %X, ParentReg %X, Actual %8.8X, ReturnValue %8.8X\n", + register_id, bit_reg_info->parent_register, + register_value, value)); - return (status); + *return_value = value; + return_ACPI_STATUS(AE_OK); } -ACPI_EXPORT_SYMBOL(acpi_get_register) +ACPI_EXPORT_SYMBOL(acpi_read_bit_register) /******************************************************************************* * - * FUNCTION: acpi_set_register + * FUNCTION: acpi_write_bit_register * - * PARAMETERS: register_id - ID of ACPI bit_register to access - * Value - (only used on write) value to write to the - * Register, NOT pre-normalized to the bit pos + * PARAMETERS: register_id - ID of ACPI Bit Register to access + * Value - Value to write to the register, in bit + * position zero. The bit is automaticallly + * shifted to the correct position. * * RETURN: Status * - * DESCRIPTION: ACPI Bit Register write function. + * DESCRIPTION: ACPI Bit Register write function. Acquires the hardware lock + * since most operations require a read/modify/write sequence. + * + * SUPPORTS: Bit fields in PM1 Status, PM1 Enable, PM1 Control, and + * PM2 Control. + * + * Note that at this level, the fact that there may be actually two + * hardware registers (A and B - and B may not exist) is abstracted. * ******************************************************************************/ -acpi_status acpi_set_register(u32 register_id, u32 value) +acpi_status acpi_write_bit_register(u32 register_id, u32 value) { - u32 register_value = 0; struct acpi_bit_register_info *bit_reg_info; - acpi_status status; acpi_cpu_flags lock_flags; + u32 register_value; + acpi_status status = AE_OK; - ACPI_FUNCTION_TRACE_U32(acpi_set_register, register_id); + ACPI_FUNCTION_TRACE_U32(acpi_write_bit_register, register_id); /* Get the info structure corresponding to the requested ACPI Register */ bit_reg_info = acpi_hw_get_bit_register_info(register_id); if (!bit_reg_info) { - ACPI_ERROR((AE_INFO, "Bad ACPI HW RegisterId: %X", - register_id)); return_ACPI_STATUS(AE_BAD_PARAMETER); } lock_flags = acpi_os_acquire_lock(acpi_gbl_hardware_lock); - /* Always do a register read first so we can insert the new bits */ - - status = acpi_hw_register_read(bit_reg_info->parent_register, - ®ister_value); - if (ACPI_FAILURE(status)) { - goto unlock_and_exit; - } - /* - * Decode the Register ID - * Register ID = [Register block ID] | [bit ID] - * - * Check bit ID to fine locate Register offset. - * Check Mask to determine Register offset, and then read-write. + * At this point, we know that the parent register is one of the + * following: PM1 Status, PM1 Enable, PM1 Control, or PM2 Control */ - switch (bit_reg_info->parent_register) { - case ACPI_REGISTER_PM1_STATUS: - + if (bit_reg_info->parent_register != ACPI_REGISTER_PM1_STATUS) { /* - * Status Registers are different from the rest. Clear by - * writing 1, and writing 0 has no effect. So, the only relevant - * information is the single bit we're interested in, all others should - * be written as 0 so they will be left unchanged. + * 1) Case for PM1 Enable, PM1 Control, and PM2 Control + * + * Perform a register read to preserve the bits that we are not + * interested in */ - value = ACPI_REGISTER_PREPARE_BITS(value, - bit_reg_info->bit_position, - bit_reg_info-> - access_bit_mask); - if (value) { - status = - acpi_hw_register_write(ACPI_REGISTER_PM1_STATUS, - (u16) value); - register_value = 0; - } - break; - - case ACPI_REGISTER_PM1_ENABLE: - - ACPI_REGISTER_INSERT_VALUE(register_value, - bit_reg_info->bit_position, - bit_reg_info->access_bit_mask, - value); - - status = acpi_hw_register_write(ACPI_REGISTER_PM1_ENABLE, - (u16) register_value); - break; - - case ACPI_REGISTER_PM1_CONTROL: - - /* - * Write the PM1 Control register. - * Note that at this level, the fact that there are actually TWO - * registers (A and B - and B may not exist) is abstracted. - */ - ACPI_DEBUG_PRINT((ACPI_DB_IO, "PM1 control: Read %X\n", - register_value)); - - ACPI_REGISTER_INSERT_VALUE(register_value, - bit_reg_info->bit_position, - bit_reg_info->access_bit_mask, - value); - - status = acpi_hw_register_write(ACPI_REGISTER_PM1_CONTROL, - (u16) register_value); - break; - - case ACPI_REGISTER_PM2_CONTROL: - - status = acpi_hw_register_read(ACPI_REGISTER_PM2_CONTROL, + status = acpi_hw_register_read(bit_reg_info->parent_register, ®ister_value); if (ACPI_FAILURE(status)) { goto unlock_and_exit; } - ACPI_DEBUG_PRINT((ACPI_DB_IO, - "PM2 control: Read %X from %8.8X%8.8X\n", - register_value, - ACPI_FORMAT_UINT64(acpi_gbl_FADT. - xpm2_control_block. - address))); - + /* + * Insert the input bit into the value that was just read + * and write the register + */ ACPI_REGISTER_INSERT_VALUE(register_value, bit_reg_info->bit_position, bit_reg_info->access_bit_mask, value); - ACPI_DEBUG_PRINT((ACPI_DB_IO, - "About to write %4.4X to %8.8X%8.8X\n", - register_value, - ACPI_FORMAT_UINT64(acpi_gbl_FADT. - xpm2_control_block. - address))); + status = acpi_hw_register_write(bit_reg_info->parent_register, + register_value); + } else { + /* + * 2) Case for PM1 Status + * + * The Status register is different from the rest. Clear an event + * by writing 1, writing 0 has no effect. So, the only relevant + * information is the single bit we're interested in, all others + * should be written as 0 so they will be left unchanged. + */ + register_value = ACPI_REGISTER_PREPARE_BITS(value, + bit_reg_info-> + bit_position, + bit_reg_info-> + access_bit_mask); - status = acpi_hw_register_write(ACPI_REGISTER_PM2_CONTROL, - (u8) (register_value)); - break; + /* No need to write the register if value is all zeros */ - default: - break; + if (register_value) { + status = + acpi_hw_register_write(ACPI_REGISTER_PM1_STATUS, + register_value); + } } - unlock_and_exit: - - acpi_os_release_lock(acpi_gbl_hardware_lock, lock_flags); - - /* Normalize the value that was read */ + ACPI_DEBUG_PRINT((ACPI_DB_IO, + "BitReg %X, ParentReg %X, Value %8.8X, Actual %8.8X\n", + register_id, bit_reg_info->parent_register, value, + register_value)); - ACPI_DEBUG_EXEC(register_value = - ((register_value & bit_reg_info->access_bit_mask) >> - bit_reg_info->bit_position)); +unlock_and_exit: - ACPI_DEBUG_PRINT((ACPI_DB_IO, - "Set bits: %8.8X actual %8.8X register %X\n", value, - register_value, bit_reg_info->parent_register)); + acpi_os_release_lock(acpi_gbl_hardware_lock, lock_flags); return_ACPI_STATUS(status); } -ACPI_EXPORT_SYMBOL(acpi_set_register) +ACPI_EXPORT_SYMBOL(acpi_write_bit_register) /******************************************************************************* * @@ -534,7 +468,7 @@ acpi_get_sleep_type_data(u8 sleep_state, u8 *sleep_type_a, u8 *sleep_type_b) /* It must be of type Package */ - else if (ACPI_GET_OBJECT_TYPE(info->return_object) != ACPI_TYPE_PACKAGE) { + else if (info->return_object->common.type != ACPI_TYPE_PACKAGE) { ACPI_ERROR((AE_INFO, "Sleep State return object is not a Package")); status = AE_AML_OPERAND_TYPE; @@ -555,12 +489,13 @@ acpi_get_sleep_type_data(u8 sleep_state, u8 *sleep_type_a, u8 *sleep_type_b) /* The first two elements must both be of type Integer */ - else if ((ACPI_GET_OBJECT_TYPE(info->return_object->package.elements[0]) + else if (((info->return_object->package.elements[0])->common.type != ACPI_TYPE_INTEGER) || - (ACPI_GET_OBJECT_TYPE(info->return_object->package.elements[1]) + ((info->return_object->package.elements[1])->common.type != ACPI_TYPE_INTEGER)) { ACPI_ERROR((AE_INFO, - "Sleep State return package elements are not both Integers (%s, %s)", + "Sleep State return package elements are not both Integers " + "(%s, %s)", acpi_ut_get_object_type_name(info->return_object-> package.elements[0]), acpi_ut_get_object_type_name(info->return_object-> diff --git a/drivers/acpi/acpica/nsaccess.c b/drivers/acpi/acpica/nsaccess.c index 88303ebe924..9c3cdbe2d82 100644 --- a/drivers/acpi/acpica/nsaccess.c +++ b/drivers/acpi/acpica/nsaccess.c @@ -118,9 +118,8 @@ acpi_status acpi_ns_root_initialize(void) } /* - * Name entered successfully. - * If entry in pre_defined_names[] specifies an - * initial value, create the initial value. + * Name entered successfully. If entry in pre_defined_names[] specifies + * an initial value, create the initial value. */ if (init_val->val) { status = acpi_os_predefined_override(init_val, &val); @@ -178,9 +177,8 @@ acpi_status acpi_ns_root_initialize(void) case ACPI_TYPE_STRING: - /* - * Build an object around the static string - */ + /* Build an object around the static string */ + obj_desc->string.length = (u32) ACPI_STRLEN(val); obj_desc->string.pointer = val; @@ -234,8 +232,7 @@ acpi_status acpi_ns_root_initialize(void) /* Store pointer to value descriptor in the Node */ status = acpi_ns_attach_object(new_node, obj_desc, - ACPI_GET_OBJECT_TYPE - (obj_desc)); + obj_desc->common.type); /* Remove local reference to the object */ @@ -315,10 +312,8 @@ acpi_ns_lookup(union acpi_generic_state *scope_info, return_ACPI_STATUS(AE_NO_NAMESPACE); } - /* - * Get the prefix scope. - * A null scope means use the root scope - */ + /* Get the prefix scope. A null scope means use the root scope */ + if ((!scope_info) || (!scope_info->scope.node)) { ACPI_DEBUG_PRINT((ACPI_DB_NAMES, "Null scope prefix, using root node (%p)\n", @@ -338,8 +333,8 @@ acpi_ns_lookup(union acpi_generic_state *scope_info, if (!(flags & ACPI_NS_PREFIX_IS_SCOPE)) { /* * This node might not be a actual "scope" node (such as a - * Device/Method, etc.) It could be a Package or other object node. - * Backup up the tree to find the containing scope node. + * Device/Method, etc.) It could be a Package or other object + * node. Backup up the tree to find the containing scope node. */ while (!acpi_ns_opens_scope(prefix_node->type) && prefix_node->type != ACPI_TYPE_ANY) { @@ -349,7 +344,7 @@ acpi_ns_lookup(union acpi_generic_state *scope_info, } } - /* Save type TBD: may be no longer necessary */ + /* Save type. TBD: may be no longer necessary */ type_to_check_for = type; @@ -414,6 +409,7 @@ acpi_ns_lookup(union acpi_generic_state *scope_info, /* Name is fully qualified, no search rules apply */ search_parent_flag = ACPI_NS_NO_UPSEARCH; + /* * Point past this prefix to the name segment * part or the next Parent Prefix @@ -429,7 +425,8 @@ acpi_ns_lookup(union acpi_generic_state *scope_info, /* Current scope has no parent scope */ ACPI_ERROR((AE_INFO, - "ACPI path has too many parent prefixes (^) - reached beyond root node")); + "ACPI path has too many parent prefixes (^) " + "- reached beyond root node")); return_ACPI_STATUS(AE_NOT_FOUND); } } @@ -531,9 +528,9 @@ acpi_ns_lookup(union acpi_generic_state *scope_info, while (num_segments && current_node) { num_segments--; if (!num_segments) { - /* - * This is the last segment, enable typechecking - */ + + /* This is the last segment, enable typechecking */ + this_search_type = type; /* @@ -584,9 +581,9 @@ acpi_ns_lookup(union acpi_generic_state *scope_info, if (num_segments > 0) { /* * If we have an alias to an object that opens a scope (such as a - * device or processor), we need to dereference the alias here so that - * we can access any children of the original node (via the remaining - * segments). + * device or processor), we need to dereference the alias here so + * that we can access any children of the original node (via the + * remaining segments). */ if (this_node->type == ACPI_TYPE_LOCAL_ALIAS) { if (!this_node->object) { @@ -594,8 +591,8 @@ acpi_ns_lookup(union acpi_generic_state *scope_info, } if (acpi_ns_opens_scope - (((struct acpi_namespace_node *)this_node-> - object)->type)) { + (((struct acpi_namespace_node *) + this_node->object)->type)) { this_node = (struct acpi_namespace_node *) this_node->object; @@ -639,8 +636,8 @@ acpi_ns_lookup(union acpi_generic_state *scope_info, /* * If this is the last name segment and we are not looking for a - * specific type, but the type of found object is known, use that type - * to (later) see if it opens a scope. + * specific type, but the type of found object is known, use that + * type to (later) see if it opens a scope. */ if (type == ACPI_TYPE_ANY) { type = this_node->type; @@ -653,9 +650,8 @@ acpi_ns_lookup(union acpi_generic_state *scope_info, current_node = this_node; } - /* - * Always check if we need to open a new scope - */ + /* Always check if we need to open a new scope */ + if (!(flags & ACPI_NS_DONT_OPEN_SCOPE) && (walk_state)) { /* * If entry is a type which opens a scope, push the new scope on the diff --git a/drivers/acpi/acpica/nsalloc.c b/drivers/acpi/acpica/nsalloc.c index f976d848fe8..aceb9311196 100644 --- a/drivers/acpi/acpica/nsalloc.c +++ b/drivers/acpi/acpica/nsalloc.c @@ -76,8 +76,7 @@ struct acpi_namespace_node *acpi_ns_create_node(u32 name) ACPI_MEM_TRACKING(acpi_gbl_ns_node_list->total_allocated++); #ifdef ACPI_DBG_TRACK_ALLOCATIONS - temp = - acpi_gbl_ns_node_list->total_allocated - + temp = acpi_gbl_ns_node_list->total_allocated - acpi_gbl_ns_node_list->total_freed; if (temp > acpi_gbl_ns_node_list->max_occupied) { acpi_gbl_ns_node_list->max_occupied = temp; @@ -145,9 +144,8 @@ void acpi_ns_delete_node(struct acpi_namespace_node *node) ACPI_MEM_TRACKING(acpi_gbl_ns_node_list->total_freed++); - /* - * Detach an object if there is one, then delete the node - */ + /* Detach an object if there is one, then delete the node */ + acpi_ns_detach_object(node); (void)acpi_os_release_object(acpi_gbl_namespace_cache, node); return_VOID; @@ -183,9 +181,8 @@ void acpi_ns_install_node(struct acpi_walk_state *walk_state, struct acpi_namesp ACPI_FUNCTION_TRACE(ns_install_node); /* - * Get the owner ID from the Walk state - * The owner ID is used to track table deletion and - * deletion of objects created by methods + * Get the owner ID from the Walk state. The owner ID is used to track + * table deletion and deletion of objects created by methods. */ if (walk_state) { owner_id = walk_state->owner_id; @@ -260,9 +257,8 @@ void acpi_ns_delete_children(struct acpi_namespace_node *parent_node) return_VOID; } - /* - * Deallocate all children at this level - */ + /* Deallocate all children at this level */ + do { /* Get the things we need */ @@ -285,9 +281,8 @@ void acpi_ns_delete_children(struct acpi_namespace_node *parent_node) "Object %p, Remaining %X\n", child_node, acpi_gbl_current_node_count)); - /* - * Detach an object if there is one, then free the child node - */ + /* Detach an object if there is one, then free the child node */ + acpi_ns_detach_object(child_node); /* Now we can delete the node */ @@ -304,7 +299,6 @@ void acpi_ns_delete_children(struct acpi_namespace_node *parent_node) /* Clear the parent's child pointer */ parent_node->child = NULL; - return_VOID; } diff --git a/drivers/acpi/acpica/nsdump.c b/drivers/acpi/acpica/nsdump.c index 0da33c8e9ba..2bad613db73 100644 --- a/drivers/acpi/acpica/nsdump.c +++ b/drivers/acpi/acpica/nsdump.c @@ -181,6 +181,12 @@ acpi_ns_dump_one_object(acpi_handle obj_handle, } this_node = acpi_ns_map_handle_to_node(obj_handle); + if (!this_node) { + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Invalid object handle %p\n", + obj_handle)); + return (AE_OK); + } + type = this_node->type; /* Check if the owner matches */ @@ -214,9 +220,8 @@ acpi_ns_dump_one_object(acpi_handle obj_handle, acpi_os_printf("%4.4s", acpi_ut_get_node_name(this_node)); } - /* - * Now we can print out the pertinent information - */ + /* Now we can print out the pertinent information */ + acpi_os_printf(" %-12s %p %2.2X ", acpi_ut_get_type_name(type), this_node, this_node->owner_id); @@ -509,7 +514,7 @@ acpi_ns_dump_one_object(acpi_handle obj_handle, case ACPI_DESC_TYPE_OPERAND: - obj_type = ACPI_GET_OBJECT_TYPE(obj_desc); + obj_type = obj_desc->common.type; if (obj_type > ACPI_TYPE_LOCAL_MAX) { acpi_os_printf @@ -539,9 +544,8 @@ acpi_ns_dump_one_object(acpi_handle obj_handle, goto cleanup; } - /* - * Valid object, get the pointer to next level, if any - */ + /* Valid object, get the pointer to next level, if any */ + switch (obj_type) { case ACPI_TYPE_BUFFER: case ACPI_TYPE_STRING: @@ -602,14 +606,14 @@ acpi_ns_dump_one_object(acpi_handle obj_handle, * display_type - 0 or ACPI_DISPLAY_SUMMARY * max_depth - Maximum depth of dump. Use ACPI_UINT32_MAX * for an effectively unlimited depth. - * owner_id - Dump only objects owned by this ID. Use + * owner_id - Dump only objects owned by this ID. Use * ACPI_UINT32_MAX to match all owners. * start_handle - Where in namespace to start/end search * * RETURN: None * - * DESCRIPTION: Dump typed objects within the loaded namespace. - * Uses acpi_ns_walk_namespace in conjunction with acpi_ns_dump_one_object. + * DESCRIPTION: Dump typed objects within the loaded namespace. Uses + * acpi_ns_walk_namespace in conjunction with acpi_ns_dump_one_object. * ******************************************************************************/ diff --git a/drivers/acpi/acpica/nseval.c b/drivers/acpi/acpica/nseval.c index 0f3d5f9b596..8e7dec1176c 100644 --- a/drivers/acpi/acpica/nseval.c +++ b/drivers/acpi/acpica/nseval.c @@ -155,7 +155,7 @@ acpi_status acpi_ns_evaluate(struct acpi_evaluate_info * info) } - ACPI_DUMP_PATHNAME(info->resolved_node, "Execute Method:", + ACPI_DUMP_PATHNAME(info->resolved_node, "ACPI: Execute Method", ACPI_LV_INFO, _COMPONENT); ACPI_DEBUG_PRINT((ACPI_DB_EXEC, diff --git a/drivers/acpi/acpica/nsinit.c b/drivers/acpi/acpica/nsinit.c index 13501cb8186..2adfcf329e1 100644 --- a/drivers/acpi/acpica/nsinit.c +++ b/drivers/acpi/acpica/nsinit.c @@ -103,7 +103,8 @@ acpi_status acpi_ns_initialize_objects(void) } ACPI_DEBUG_PRINT_RAW((ACPI_DB_INIT, - "\nInitialized %hd/%hd Regions %hd/%hd Fields %hd/%hd Buffers %hd/%hd Packages (%hd nodes)\n", + "\nInitialized %hd/%hd Regions %hd/%hd Fields %hd/%hd " + "Buffers %hd/%hd Packages (%hd nodes)\n", info.op_region_init, info.op_region_count, info.field_init, info.field_count, info.buffer_init, info.buffer_count, @@ -148,7 +149,8 @@ acpi_status acpi_ns_initialize_devices(void) info.num_INI = 0; ACPI_DEBUG_PRINT_RAW((ACPI_DB_INIT, - "Initializing Device/Processor/Thermal objects by executing _INI methods:")); + "Initializing Device/Processor/Thermal objects " + "by executing _INI methods:")); /* Tree analysis: find all subtrees that contain _INI methods */ @@ -180,7 +182,8 @@ acpi_status acpi_ns_initialize_devices(void) } ACPI_DEBUG_PRINT_RAW((ACPI_DB_INIT, - "\nExecuted %hd _INI methods requiring %hd _STA executions (examined %hd objects)\n", + "\nExecuted %hd _INI methods requiring %hd _STA executions " + "(examined %hd objects)\n", info.num_INI, info.num_STA, info.device_count)); return_ACPI_STATUS(status); @@ -263,16 +266,14 @@ acpi_ns_init_one_object(acpi_handle obj_handle, return (AE_OK); } - /* - * If the object is already initialized, nothing else to do - */ + /* If the object is already initialized, nothing else to do */ + if (obj_desc->common.flags & AOPOBJ_DATA_VALID) { return (AE_OK); } - /* - * Must lock the interpreter before executing AML code - */ + /* Must lock the interpreter before executing AML code */ + acpi_ex_enter_interpreter(); /* diff --git a/drivers/acpi/acpica/nsload.c b/drivers/acpi/acpica/nsload.c index a0ba9e12379..dcd7a6adbbb 100644 --- a/drivers/acpi/acpica/nsload.c +++ b/drivers/acpi/acpica/nsload.c @@ -128,12 +128,12 @@ acpi_ns_load_table(u32 table_index, struct acpi_namespace_node *node) * parse trees. */ ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "**** Begin Table Method Parsing and Object Initialization ****\n")); + "**** Begin Table Method Parsing and Object Initialization\n")); status = acpi_ds_initialize_objects(table_index, node); ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "**** Completed Table Method Parsing and Object Initialization ****\n")); + "**** Completed Table Method Parsing and Object Initialization\n")); return_ACPI_STATUS(status); } diff --git a/drivers/acpi/acpica/nsobject.c b/drivers/acpi/acpica/nsobject.c index 08a97a57f8f..3eb20bfda9d 100644 --- a/drivers/acpi/acpica/nsobject.c +++ b/drivers/acpi/acpica/nsobject.c @@ -209,8 +209,7 @@ void acpi_ns_detach_object(struct acpi_namespace_node *node) obj_desc = node->object; - if (!obj_desc || - (ACPI_GET_OBJECT_TYPE(obj_desc) == ACPI_TYPE_LOCAL_DATA)) { + if (!obj_desc || (obj_desc->common.type == ACPI_TYPE_LOCAL_DATA)) { return_VOID; } @@ -220,8 +219,7 @@ void acpi_ns_detach_object(struct acpi_namespace_node *node) if (ACPI_GET_DESCRIPTOR_TYPE(obj_desc) == ACPI_DESC_TYPE_OPERAND) { node->object = obj_desc->common.next_object; if (node->object && - (ACPI_GET_OBJECT_TYPE(node->object) != - ACPI_TYPE_LOCAL_DATA)) { + ((node->object)->common.type != ACPI_TYPE_LOCAL_DATA)) { node->object = node->object->common.next_object; } } @@ -267,7 +265,7 @@ union acpi_operand_object *acpi_ns_get_attached_object(struct ((ACPI_GET_DESCRIPTOR_TYPE(node->object) != ACPI_DESC_TYPE_OPERAND) && (ACPI_GET_DESCRIPTOR_TYPE(node->object) != ACPI_DESC_TYPE_NAMED)) - || (ACPI_GET_OBJECT_TYPE(node->object) == ACPI_TYPE_LOCAL_DATA)) { + || ((node->object)->common.type == ACPI_TYPE_LOCAL_DATA)) { return_PTR(NULL); } @@ -294,9 +292,9 @@ union acpi_operand_object *acpi_ns_get_secondary_object(union ACPI_FUNCTION_TRACE_PTR(ns_get_secondary_object, obj_desc); if ((!obj_desc) || - (ACPI_GET_OBJECT_TYPE(obj_desc) == ACPI_TYPE_LOCAL_DATA) || + (obj_desc->common.type == ACPI_TYPE_LOCAL_DATA) || (!obj_desc->common.next_object) || - (ACPI_GET_OBJECT_TYPE(obj_desc->common.next_object) == + ((obj_desc->common.next_object)->common.type == ACPI_TYPE_LOCAL_DATA)) { return_PTR(NULL); } @@ -331,7 +329,7 @@ acpi_ns_attach_data(struct acpi_namespace_node *node, prev_obj_desc = NULL; obj_desc = node->object; while (obj_desc) { - if ((ACPI_GET_OBJECT_TYPE(obj_desc) == ACPI_TYPE_LOCAL_DATA) && + if ((obj_desc->common.type == ACPI_TYPE_LOCAL_DATA) && (obj_desc->data.handler == handler)) { return (AE_ALREADY_EXISTS); } @@ -385,7 +383,7 @@ acpi_ns_detach_data(struct acpi_namespace_node * node, prev_obj_desc = NULL; obj_desc = node->object; while (obj_desc) { - if ((ACPI_GET_OBJECT_TYPE(obj_desc) == ACPI_TYPE_LOCAL_DATA) && + if ((obj_desc->common.type == ACPI_TYPE_LOCAL_DATA) && (obj_desc->data.handler == handler)) { if (prev_obj_desc) { prev_obj_desc->common.next_object = @@ -428,7 +426,7 @@ acpi_ns_get_attached_data(struct acpi_namespace_node * node, obj_desc = node->object; while (obj_desc) { - if ((ACPI_GET_OBJECT_TYPE(obj_desc) == ACPI_TYPE_LOCAL_DATA) && + if ((obj_desc->common.type == ACPI_TYPE_LOCAL_DATA) && (obj_desc->data.handler == handler)) { *data = obj_desc->data.pointer; return (AE_OK); diff --git a/drivers/acpi/acpica/nsparse.c b/drivers/acpi/acpica/nsparse.c index b9e8d0070b6..662a4bd5b62 100644 --- a/drivers/acpi/acpica/nsparse.c +++ b/drivers/acpi/acpica/nsparse.c @@ -176,9 +176,8 @@ acpi_ns_parse_table(u32 table_index, struct acpi_namespace_node *start_node) * performs another complete parse of the AML. */ ACPI_DEBUG_PRINT((ACPI_DB_PARSE, "**** Start pass 1\n")); - status = - acpi_ns_one_complete_parse(ACPI_IMODE_LOAD_PASS1, table_index, - start_node); + status = acpi_ns_one_complete_parse(ACPI_IMODE_LOAD_PASS1, + table_index, start_node); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } @@ -193,9 +192,8 @@ acpi_ns_parse_table(u32 table_index, struct acpi_namespace_node *start_node) * parse objects are all cached. */ ACPI_DEBUG_PRINT((ACPI_DB_PARSE, "**** Start pass 2\n")); - status = - acpi_ns_one_complete_parse(ACPI_IMODE_LOAD_PASS2, table_index, - start_node); + status = acpi_ns_one_complete_parse(ACPI_IMODE_LOAD_PASS2, + table_index, start_node); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } diff --git a/drivers/acpi/acpica/nspredef.c b/drivers/acpi/acpica/nspredef.c index 452703290d3..d9e8cbc6e67 100644 --- a/drivers/acpi/acpica/nspredef.c +++ b/drivers/acpi/acpica/nspredef.c @@ -79,7 +79,9 @@ acpi_ns_check_package(char *pathname, static acpi_status acpi_ns_check_package_elements(char *pathname, union acpi_operand_object **elements, - u8 type1, u32 count1, u8 type2, u32 count2); + u8 type1, + u32 count1, + u8 type2, u32 count2, u32 start_index); static acpi_status acpi_ns_check_object_type(char *pathname, @@ -221,7 +223,7 @@ acpi_ns_check_predefined_names(struct acpi_namespace_node *node, /* For returned Package objects, check the type of all sub-objects */ - if (ACPI_GET_OBJECT_TYPE(return_object) == ACPI_TYPE_PACKAGE) { + if (return_object->common.type == ACPI_TYPE_PACKAGE) { status = acpi_ns_check_package(pathname, return_object_ptr, predefined); @@ -302,7 +304,8 @@ acpi_ns_check_parameter_count(char *pathname, if ((user_param_count != required_params_current) && (user_param_count != required_params_old)) { ACPI_WARNING((AE_INFO, - "%s: Parameter count mismatch - caller passed %d, ACPI requires %d", + "%s: Parameter count mismatch - " + "caller passed %d, ACPI requires %d", pathname, user_param_count, required_params_current)); } @@ -472,7 +475,7 @@ acpi_ns_check_package(char *pathname, package->ret_info. object_type2, package->ret_info. - count2); + count2, 0); if (ACPI_FAILURE(status)) { return (status); } @@ -623,7 +626,7 @@ acpi_ns_check_package(char *pathname, object_type2, package-> ret_info. - count2); + count2, 0); if (ACPI_FAILURE(status)) { return (status); } @@ -672,7 +675,8 @@ acpi_ns_check_package(char *pathname, object_type1, sub_package-> package. - count, 0, 0); + count, 0, 0, + 0); if (ACPI_FAILURE(status)) { return (status); } @@ -710,7 +714,8 @@ acpi_ns_check_package(char *pathname, ret_info. object_type1, (expected_count - - 1), 0, 0); + - 1), 0, 0, + 1); if (ACPI_FAILURE(status)) { return (status); } @@ -758,6 +763,7 @@ acpi_ns_check_package(char *pathname, * Count1 - Count for first group * Type2 - Object type for second group * Count2 - Count for second group + * start_index - Start of the first group of elements * * RETURN: Status * @@ -769,7 +775,9 @@ acpi_ns_check_package(char *pathname, static acpi_status acpi_ns_check_package_elements(char *pathname, union acpi_operand_object **elements, - u8 type1, u32 count1, u8 type2, u32 count2) + u8 type1, + u32 count1, + u8 type2, u32 count2, u32 start_index) { union acpi_operand_object **this_element = elements; acpi_status status; @@ -782,7 +790,7 @@ acpi_ns_check_package_elements(char *pathname, */ for (i = 0; i < count1; i++) { status = acpi_ns_check_object_type(pathname, this_element, - type1, i); + type1, i + start_index); if (ACPI_FAILURE(status)) { return (status); } @@ -791,7 +799,8 @@ acpi_ns_check_package_elements(char *pathname, for (i = 0; i < count2; i++) { status = acpi_ns_check_object_type(pathname, this_element, - type2, (i + count1)); + type2, + (i + count1 + start_index)); if (ACPI_FAILURE(status)) { return (status); } @@ -858,7 +867,7 @@ acpi_ns_check_object_type(char *pathname, * from all of the predefined names (including elements of returned * packages) */ - switch (ACPI_GET_OBJECT_TYPE(return_object)) { + switch (return_object->common.type) { case ACPI_TYPE_INTEGER: return_btype = ACPI_RTYPE_INTEGER; break; @@ -901,7 +910,7 @@ acpi_ns_check_object_type(char *pathname, /* For reference objects, check that the reference type is correct */ - if (ACPI_GET_OBJECT_TYPE(return_object) == ACPI_TYPE_LOCAL_REFERENCE) { + if (return_object->common.type == ACPI_TYPE_LOCAL_REFERENCE) { status = acpi_ns_check_reference(pathname, return_object); } @@ -974,7 +983,8 @@ acpi_ns_check_reference(char *pathname, } ACPI_WARNING((AE_INFO, - "%s: Return type mismatch - unexpected reference object type [%s] %2.2X", + "%s: Return type mismatch - " + "unexpected reference object type [%s] %2.2X", pathname, acpi_ut_get_reference_name(return_object), return_object->reference.class)); @@ -1006,7 +1016,7 @@ acpi_ns_repair_object(u32 expected_btypes, union acpi_operand_object *new_object; acpi_size length; - switch (ACPI_GET_OBJECT_TYPE(return_object)) { + switch (return_object->common.type) { case ACPI_TYPE_BUFFER: if (!(expected_btypes & ACPI_RTYPE_STRING)) { diff --git a/drivers/acpi/acpica/nssearch.c b/drivers/acpi/acpica/nssearch.c index 6fea13f3f52..f9b4f51bf8f 100644 --- a/drivers/acpi/acpica/nssearch.c +++ b/drivers/acpi/acpica/nssearch.c @@ -167,7 +167,8 @@ acpi_ns_search_one_scope(u32 target_name, /* Searched entire namespace level, not found */ ACPI_DEBUG_PRINT((ACPI_DB_NAMES, - "Name [%4.4s] (%s) not found in search in scope [%4.4s] %p first child %p\n", + "Name [%4.4s] (%s) not found in search in scope [%4.4s] " + "%p first child %p\n", ACPI_CAST_PTR(char, &target_name), acpi_ut_get_type_name(type), acpi_ut_get_node_name(parent_node), parent_node, @@ -239,9 +240,8 @@ acpi_ns_search_parent_tree(u32 target_name, acpi_ut_get_node_name(parent_node), ACPI_CAST_PTR(char, &target_name))); - /* - * Search parents until target is found or we have backed up to the root - */ + /* Search parents until target is found or we have backed up to the root */ + while (parent_node) { /* * Search parent scope. Use TYPE_ANY because we don't care about the @@ -395,9 +395,9 @@ acpi_ns_search_and_enter(u32 target_name, return_ACPI_STATUS(AE_NO_MEMORY); } #ifdef ACPI_ASL_COMPILER - /* - * Node is an object defined by an External() statement - */ + + /* Node is an object defined by an External() statement */ + if (flags & ACPI_NS_EXTERNAL) { new_node->flags |= ANOBJ_IS_EXTERNAL; } diff --git a/drivers/acpi/acpica/nsutils.c b/drivers/acpi/acpica/nsutils.c index 3e1149bf4aa..78277ed0833 100644 --- a/drivers/acpi/acpica/nsutils.c +++ b/drivers/acpi/acpica/nsutils.c @@ -325,9 +325,8 @@ void acpi_ns_get_internal_name_length(struct acpi_namestring_info *info) next_external_char++; } } else { - /* - * Handle Carat prefixes - */ + /* Handle Carat prefixes */ + while (*next_external_char == '^') { info->num_carats++; next_external_char++; @@ -552,9 +551,8 @@ acpi_ns_externalize_name(u32 internal_name_length, return_ACPI_STATUS(AE_BAD_PARAMETER); } - /* - * Check for a prefix (one '\' | one or more '^'). - */ + /* Check for a prefix (one '\' | one or more '^') */ + switch (internal_name[0]) { case '\\': prefix_length = 1; @@ -580,7 +578,7 @@ acpi_ns_externalize_name(u32 internal_name_length, } /* - * Check for object names. Note that there could be 0-255 of these + * Check for object names. Note that there could be 0-255 of these * 4-byte elements. */ if (prefix_length < internal_name_length) { @@ -637,9 +635,8 @@ acpi_ns_externalize_name(u32 internal_name_length, return_ACPI_STATUS(AE_BAD_PATHNAME); } - /* - * Build converted_name - */ + /* Build the converted_name */ + *converted_name = ACPI_ALLOCATE_ZEROED(required_length); if (!(*converted_name)) { return_ACPI_STATUS(AE_NO_MEMORY); @@ -685,6 +682,9 @@ acpi_ns_externalize_name(u32 internal_name_length, * and keep all pointers within this subsystem - however this introduces * more (and perhaps unnecessary) overhead. * + * The current implemenation is basically a placeholder until such time comes + * that it is needed. + * ******************************************************************************/ struct acpi_namespace_node *acpi_ns_map_handle_to_node(acpi_handle handle) @@ -692,9 +692,8 @@ struct acpi_namespace_node *acpi_ns_map_handle_to_node(acpi_handle handle) ACPI_FUNCTION_ENTRY(); - /* - * Simple implementation - */ + /* Parameter validation */ + if ((!handle) || (handle == ACPI_ROOT_OBJECT)) { return (acpi_gbl_root_node); } @@ -872,7 +871,7 @@ acpi_ns_get_node(struct acpi_namespace_node *prefix_node, (flags | ACPI_NS_DONT_OPEN_SCOPE), NULL, return_node); if (ACPI_FAILURE(status)) { - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "%s, %s\n", + ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "%s, %s\n", pathname, acpi_format_exception(status))); } diff --git a/drivers/acpi/acpica/nswalk.c b/drivers/acpi/acpica/nswalk.c index 200895fa272..83e3aa6d4b9 100644 --- a/drivers/acpi/acpica/nswalk.c +++ b/drivers/acpi/acpica/nswalk.c @@ -135,8 +135,8 @@ struct acpi_namespace_node *acpi_ns_get_next_node(acpi_object_type type, struct * starting (and ending) at the node specified by start_handle. * The user_function is called whenever a node that matches * the type parameter is found. If the user function returns - * a non-zero value, the search is terminated immediately and this - * value is returned to the caller. + * a non-zero value, the search is terminated immediately and + * this value is returned to the caller. * * The point of this procedure is to provide a generic namespace * walk routine that can be called from multiple places to @@ -200,10 +200,10 @@ acpi_ns_walk_namespace(acpi_object_type type, /* * Ignore all temporary namespace nodes (created during control * method execution) unless told otherwise. These temporary nodes - * can cause a race condition because they can be deleted during the - * execution of the user function (if the namespace is unlocked before - * invocation of the user function.) Only the debugger namespace dump - * will examine the temporary nodes. + * can cause a race condition because they can be deleted during + * the execution of the user function (if the namespace is + * unlocked before invocation of the user function.) Only the + * debugger namespace dump will examine the temporary nodes. */ if ((child_node->flags & ANOBJ_TEMPORARY) && !(flags & ACPI_NS_WALK_TEMP_NODES)) { diff --git a/drivers/acpi/acpica/nsxfeval.c b/drivers/acpi/acpica/nsxfeval.c index 22a7171ac1e..daf4ad37896 100644 --- a/drivers/acpi/acpica/nsxfeval.c +++ b/drivers/acpi/acpica/nsxfeval.c @@ -53,7 +53,6 @@ ACPI_MODULE_NAME("nsxfeval") /* Local prototypes */ static void acpi_ns_resolve_references(struct acpi_evaluate_info *info); -#ifdef ACPI_FUTURE_USAGE /******************************************************************************* * * FUNCTION: acpi_evaluate_object_typed @@ -147,7 +146,7 @@ acpi_evaluate_object_typed(acpi_handle handle, } ACPI_EXPORT_SYMBOL(acpi_evaluate_object_typed) -#endif /* ACPI_FUTURE_USAGE */ + /******************************************************************************* * * FUNCTION: acpi_evaluate_object @@ -387,8 +386,7 @@ static void acpi_ns_resolve_references(struct acpi_evaluate_info *info) /* We are interested in reference objects only */ - if (ACPI_GET_OBJECT_TYPE(info->return_object) != - ACPI_TYPE_LOCAL_REFERENCE) { + if ((info->return_object)->common.type != ACPI_TYPE_LOCAL_REFERENCE) { return; } @@ -476,21 +474,40 @@ acpi_walk_namespace(acpi_object_type type, } /* - * Lock the namespace around the walk. - * The namespace will be unlocked/locked around each call - * to the user function - since this function - * must be allowed to make Acpi calls itself. + * Need to acquire the namespace reader lock to prevent interference + * with any concurrent table unloads (which causes the deletion of + * namespace objects). We cannot allow the deletion of a namespace node + * while the user function is using it. The exception to this are the + * nodes created and deleted during control method execution -- these + * nodes are marked as temporary nodes and are ignored by the namespace + * walk. Thus, control methods can be executed while holding the + * namespace deletion lock (and the user function can execute control + * methods.) + */ + status = acpi_ut_acquire_read_lock(&acpi_gbl_namespace_rw_lock); + if (ACPI_FAILURE(status)) { + return status; + } + + /* + * Lock the namespace around the walk. The namespace will be + * unlocked/locked around each call to the user function - since the user + * function must be allowed to make ACPICA calls itself (for example, it + * will typically execute control methods during device enumeration.) */ status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE); if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); + goto unlock_and_exit; } status = acpi_ns_walk_namespace(type, start_object, max_depth, - ACPI_NS_WALK_UNLOCK, - user_function, context, return_value); + ACPI_NS_WALK_UNLOCK, user_function, + context, return_value); (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE); + + unlock_and_exit: + (void)acpi_ut_release_read_lock(&acpi_gbl_namespace_rw_lock); return_ACPI_STATUS(status); } diff --git a/drivers/acpi/acpica/rscalc.c b/drivers/acpi/acpica/rscalc.c index 52865ee6bc7..88b5a2c4814 100644 --- a/drivers/acpi/acpica/rscalc.c +++ b/drivers/acpi/acpica/rscalc.c @@ -543,6 +543,13 @@ acpi_rs_get_pci_routing_table_length(union acpi_operand_object *package_object, package_element = *top_object_list; + /* We must have a valid Package object */ + + if (!package_element || + (package_element->common.type != ACPI_TYPE_PACKAGE)) { + return_ACPI_STATUS (AE_AML_OPERAND_TYPE); + } + /* * The sub_object_list will now point to an array of the * four IRQ elements: Address, Pin, Source and source_index @@ -557,9 +564,9 @@ acpi_rs_get_pci_routing_table_length(union acpi_operand_object *package_object, table_index++) { if (*sub_object_list && /* Null object allowed */ ((ACPI_TYPE_STRING == - ACPI_GET_OBJECT_TYPE(*sub_object_list)) || + (*sub_object_list)->common.type) || ((ACPI_TYPE_LOCAL_REFERENCE == - ACPI_GET_OBJECT_TYPE(*sub_object_list)) && + (*sub_object_list)->common.type) && ((*sub_object_list)->reference.class == ACPI_REFCLASS_NAME)))) { name_found = TRUE; @@ -575,8 +582,7 @@ acpi_rs_get_pci_routing_table_length(union acpi_operand_object *package_object, /* Was a String type found? */ if (name_found) { - if (ACPI_GET_OBJECT_TYPE(*sub_object_list) == - ACPI_TYPE_STRING) { + if ((*sub_object_list)->common.type == ACPI_TYPE_STRING) { /* * The length String.Length field does not include the * terminating NULL, add 1 diff --git a/drivers/acpi/acpica/rscreate.c b/drivers/acpi/acpica/rscreate.c index 61566b1a061..a3c23d686d5 100644 --- a/drivers/acpi/acpica/rscreate.c +++ b/drivers/acpi/acpica/rscreate.c @@ -191,8 +191,6 @@ acpi_rs_create_pci_routing_table(union acpi_operand_object *package_object, user_prt = ACPI_CAST_PTR(struct acpi_pci_routing_table, buffer); for (index = 0; index < number_of_elements; index++) { - int source_name_index = 2; - int source_index_index = 3; /* * Point user_prt past this current structure @@ -212,7 +210,7 @@ acpi_rs_create_pci_routing_table(union acpi_operand_object *package_object, /* Each element of the top-level package must also be a package */ - if (ACPI_GET_OBJECT_TYPE(*top_object_list) != ACPI_TYPE_PACKAGE) { + if ((*top_object_list)->common.type != ACPI_TYPE_PACKAGE) { ACPI_ERROR((AE_INFO, "(PRT[%X]) Need sub-package, found %s", index, @@ -240,7 +238,7 @@ acpi_rs_create_pci_routing_table(union acpi_operand_object *package_object, /* 1) First subobject: Dereference the PRT.Address */ obj_desc = sub_object_list[0]; - if (ACPI_GET_OBJECT_TYPE(obj_desc) != ACPI_TYPE_INTEGER) { + if (obj_desc->common.type != ACPI_TYPE_INTEGER) { ACPI_ERROR((AE_INFO, "(PRT[%X].Address) Need Integer, found %s", index, @@ -253,7 +251,7 @@ acpi_rs_create_pci_routing_table(union acpi_operand_object *package_object, /* 2) Second subobject: Dereference the PRT.Pin */ obj_desc = sub_object_list[1]; - if (ACPI_GET_OBJECT_TYPE(obj_desc) != ACPI_TYPE_INTEGER) { + if (obj_desc->common.type != ACPI_TYPE_INTEGER) { ACPI_ERROR((AE_INFO, "(PRT[%X].Pin) Need Integer, found %s", index, @@ -261,27 +259,6 @@ acpi_rs_create_pci_routing_table(union acpi_operand_object *package_object, return_ACPI_STATUS(AE_BAD_DATA); } - /* - * If BIOS erroneously reversed the _PRT source_name and source_index, - * then reverse them back. - */ - if (ACPI_GET_OBJECT_TYPE(sub_object_list[3]) != - ACPI_TYPE_INTEGER) { - if (acpi_gbl_enable_interpreter_slack) { - source_name_index = 3; - source_index_index = 2; - printk(KERN_WARNING - "ACPI: Handling Garbled _PRT entry\n"); - } else { - ACPI_ERROR((AE_INFO, - "(PRT[%X].source_index) Need Integer, found %s", - index, - acpi_ut_get_object_type_name - (sub_object_list[3]))); - return_ACPI_STATUS(AE_BAD_DATA); - } - } - user_prt->pin = (u32) obj_desc->integer.value; /* @@ -291,8 +268,7 @@ acpi_rs_create_pci_routing_table(union acpi_operand_object *package_object, * other ACPI implementations. */ obj_desc = sub_object_list[3]; - if (!obj_desc - || (ACPI_GET_OBJECT_TYPE(obj_desc) != ACPI_TYPE_INTEGER)) { + if (!obj_desc || (obj_desc->common.type != ACPI_TYPE_INTEGER)) { sub_object_list[3] = sub_object_list[2]; sub_object_list[2] = obj_desc; @@ -305,9 +281,9 @@ acpi_rs_create_pci_routing_table(union acpi_operand_object *package_object, * 3) Third subobject: Dereference the PRT.source_name * The name may be unresolved (slack mode), so allow a null object */ - obj_desc = sub_object_list[source_name_index]; + obj_desc = sub_object_list[2]; if (obj_desc) { - switch (ACPI_GET_OBJECT_TYPE(obj_desc)) { + switch (obj_desc->common.type) { case ACPI_TYPE_LOCAL_REFERENCE: if (obj_desc->reference.class != @@ -379,8 +355,8 @@ acpi_rs_create_pci_routing_table(union acpi_operand_object *package_object, /* 4) Fourth subobject: Dereference the PRT.source_index */ - obj_desc = sub_object_list[source_index_index]; - if (ACPI_GET_OBJECT_TYPE(obj_desc) != ACPI_TYPE_INTEGER) { + obj_desc = sub_object_list[3]; + if (obj_desc->common.type != ACPI_TYPE_INTEGER) { ACPI_ERROR((AE_INFO, "(PRT[%X].SourceIndex) Need Integer, found %s", index, diff --git a/drivers/acpi/acpica/tbfadt.c b/drivers/acpi/acpica/tbfadt.c index 3636e4f8fb7..71e655d14cb 100644 --- a/drivers/acpi/acpica/tbfadt.c +++ b/drivers/acpi/acpica/tbfadt.c @@ -57,6 +57,8 @@ static void acpi_tb_convert_fadt(void); static void acpi_tb_validate_fadt(void); +static void acpi_tb_setup_fadt_registers(void); + /* Table for conversion of FADT to common internal format and FADT validation */ typedef struct acpi_fadt_info { @@ -130,7 +132,38 @@ static struct acpi_fadt_info fadt_info_table[] = { ACPI_FADT_SEPARATE_LENGTH} }; -#define ACPI_FADT_INFO_ENTRIES (sizeof (fadt_info_table) / sizeof (struct acpi_fadt_info)) +#define ACPI_FADT_INFO_ENTRIES \ + (sizeof (fadt_info_table) / sizeof (struct acpi_fadt_info)) + +/* Table used to split Event Blocks into separate status/enable registers */ + +typedef struct acpi_fadt_pm_info { + struct acpi_generic_address *target; + u8 source; + u8 register_num; + +} acpi_fadt_pm_info; + +static struct acpi_fadt_pm_info fadt_pm_info_table[] = { + {&acpi_gbl_xpm1a_status, + ACPI_FADT_OFFSET(xpm1a_event_block), + 0}, + + {&acpi_gbl_xpm1a_enable, + ACPI_FADT_OFFSET(xpm1a_event_block), + 1}, + + {&acpi_gbl_xpm1b_status, + ACPI_FADT_OFFSET(xpm1b_event_block), + 0}, + + {&acpi_gbl_xpm1b_enable, + ACPI_FADT_OFFSET(xpm1b_event_block), + 1} +}; + +#define ACPI_FADT_PM_INFO_ENTRIES \ + (sizeof (fadt_pm_info_table) / sizeof (struct acpi_fadt_pm_info)) /******************************************************************************* * @@ -172,7 +205,6 @@ acpi_tb_init_generic_address(struct acpi_generic_address *generic_address, * FUNCTION: acpi_tb_parse_fadt * * PARAMETERS: table_index - Index for the FADT - * Flags - Flags * * RETURN: None * @@ -181,7 +213,7 @@ acpi_tb_init_generic_address(struct acpi_generic_address *generic_address, * ******************************************************************************/ -void acpi_tb_parse_fadt(u32 table_index, u8 flags) +void acpi_tb_parse_fadt(u32 table_index) { u32 length; struct acpi_table_header *table; @@ -208,7 +240,7 @@ void acpi_tb_parse_fadt(u32 table_index, u8 flags) */ (void)acpi_tb_verify_checksum(table, length); - /* Obtain a local copy of the FADT in common ACPI 2.0+ format */ + /* Create a local copy of the FADT in common ACPI 2.0+ format */ acpi_tb_create_local_fadt(table, length); @@ -219,10 +251,10 @@ void acpi_tb_parse_fadt(u32 table_index, u8 flags) /* Obtain the DSDT and FACS tables via their addresses within the FADT */ acpi_tb_install_table((acpi_physical_address) acpi_gbl_FADT.Xdsdt, - flags, ACPI_SIG_DSDT, ACPI_TABLE_INDEX_DSDT); + ACPI_SIG_DSDT, ACPI_TABLE_INDEX_DSDT); acpi_tb_install_table((acpi_physical_address) acpi_gbl_FADT.Xfacs, - flags, ACPI_SIG_FACS, ACPI_TABLE_INDEX_FACS); + ACPI_SIG_FACS, ACPI_TABLE_INDEX_FACS); } /******************************************************************************* @@ -266,11 +298,17 @@ void acpi_tb_create_local_fadt(struct acpi_table_header *table, u32 length) ACPI_MEMCPY(&acpi_gbl_FADT, table, ACPI_MIN(length, sizeof(struct acpi_table_fadt))); - /* - * 1) Convert the local copy of the FADT to the common internal format - * 2) Validate some of the important values within the FADT - */ + /* Convert the local copy of the FADT to the common internal format */ + acpi_tb_convert_fadt(); + + /* Validate FADT values now, before we make any changes */ + + acpi_tb_validate_fadt(); + + /* Initialize the global ACPI register structures */ + + acpi_tb_setup_fadt_registers(); } /******************************************************************************* @@ -282,31 +320,35 @@ void acpi_tb_create_local_fadt(struct acpi_table_header *table, u32 length) * RETURN: None * * DESCRIPTION: Converts all versions of the FADT to a common internal format. - * Expand all 32-bit addresses to 64-bit. + * Expand 32-bit addresses to 64-bit as necessary. * * NOTE: acpi_gbl_FADT must be of size (struct acpi_table_fadt), * and must contain a copy of the actual FADT. * - * ACPICA will use the "X" fields of the FADT for all addresses. + * Notes on 64-bit register addresses: + * + * After this FADT conversion, later ACPICA code will only use the 64-bit "X" + * fields of the FADT for all ACPI register addresses. * - * "X" fields are optional extensions to the original V1.0 fields. Even if - * they are present in the structure, they can be optionally not used by - * setting them to zero. Therefore, we must selectively expand V1.0 fields - * if the corresponding X field is zero. + * The 64-bit "X" fields are optional extensions to the original 32-bit FADT + * V1.0 fields. Even if they are present in the FADT, they are optional and + * are unused if the BIOS sets them to zero. Therefore, we must copy/expand + * 32-bit V1.0 fields if the corresponding X field is zero. * - * For ACPI 1.0 FADTs, all address fields are expanded to the corresponding - * "X" fields. + * For ACPI 1.0 FADTs, all 32-bit address fields are expanded to the + * corresponding "X" fields in the internal FADT. * - * For ACPI 2.0 FADTs, any "X" fields that are NULL are filled in by - * expanding the corresponding ACPI 1.0 field. + * For ACPI 2.0+ FADTs, all valid (non-zero) 32-bit address fields are expanded + * to the corresponding 64-bit X fields. For compatibility with other ACPI + * implementations, we ignore the 64-bit field if the 32-bit field is valid, + * regardless of whether the host OS is 32-bit or 64-bit. * ******************************************************************************/ static void acpi_tb_convert_fadt(void) { - u8 pm1_register_bit_width; - u8 pm1_register_byte_width; - struct acpi_generic_address *target64; + struct acpi_generic_address *address64; + u32 address32; u32 i; /* Update the local FADT table header length */ @@ -355,140 +397,56 @@ static void acpi_tb_convert_fadt(void) * Expand the ACPI 1.0 32-bit addresses to the ACPI 2.0 64-bit "X" * generic address structures as necessary. Later code will always use * the 64-bit address structures. + * + * March 2009: + * We now always use the 32-bit address if it is valid (non-null). This + * is not in accordance with the ACPI specification which states that + * the 64-bit address supersedes the 32-bit version, but we do this for + * compatibility with other ACPI implementations. Most notably, in the + * case where both the 32 and 64 versions are non-null, we use the 32-bit + * version. This is the only address that is guaranteed to have been + * tested by the BIOS manufacturer. */ for (i = 0; i < ACPI_FADT_INFO_ENTRIES; i++) { - target64 = - ACPI_ADD_PTR(struct acpi_generic_address, &acpi_gbl_FADT, - fadt_info_table[i].address64); + address32 = *ACPI_ADD_PTR(u32, + &acpi_gbl_FADT, + fadt_info_table[i].address32); - /* Expand only if the 64-bit X target is null */ + address64 = ACPI_ADD_PTR(struct acpi_generic_address, + &acpi_gbl_FADT, + fadt_info_table[i].address64); - if (!target64->address) { + /* + * If both 32- and 64-bit addresses are valid (non-zero), + * they must match. + */ + if (address64->address && address32 && + (address64->address != (u64) address32)) { + ACPI_ERROR((AE_INFO, + "32/64X address mismatch in %s: %8.8X/%8.8X%8.8X, using 32", + fadt_info_table[i].name, address32, + ACPI_FORMAT_UINT64(address64->address))); + } - /* The space_id is always I/O for the 32-bit legacy address fields */ + /* Always use 32-bit address if it is valid (non-null) */ - acpi_tb_init_generic_address(target64, + if (address32) { + /* + * Copy the 32-bit address to the 64-bit GAS structure. The + * Space ID is always I/O for 32-bit legacy address fields + */ + acpi_tb_init_generic_address(address64, ACPI_ADR_SPACE_SYSTEM_IO, *ACPI_ADD_PTR(u8, &acpi_gbl_FADT, fadt_info_table [i].length), - (u64) * ACPI_ADD_PTR(u32, - &acpi_gbl_FADT, - fadt_info_table - [i]. - address32)); - } - } - - /* Validate FADT values now, before we make any changes */ - - acpi_tb_validate_fadt(); - - /* - * Optionally check all register lengths against the default values and - * update them if they are incorrect. - */ - if (acpi_gbl_use_default_register_widths) { - for (i = 0; i < ACPI_FADT_INFO_ENTRIES; i++) { - target64 = - ACPI_ADD_PTR(struct acpi_generic_address, - &acpi_gbl_FADT, - fadt_info_table[i].address64); - - /* - * If a valid register (Address != 0) and the (default_length > 0) - * (Not a GPE register), then check the width against the default. - */ - if ((target64->address) && - (fadt_info_table[i].default_length > 0) && - (fadt_info_table[i].default_length != - target64->bit_width)) { - ACPI_WARNING((AE_INFO, - "Invalid length for %s: %d, using default %d", - fadt_info_table[i].name, - target64->bit_width, - fadt_info_table[i]. - default_length)); - - /* Incorrect size, set width to the default */ - - target64->bit_width = - fadt_info_table[i].default_length; - } + address32); } } - - /* - * Get the length of the individual PM1 registers (enable and status). - * Each register is defined to be (event block length / 2). - */ - pm1_register_bit_width = - (u8)ACPI_DIV_2(acpi_gbl_FADT.xpm1a_event_block.bit_width); - pm1_register_byte_width = (u8)ACPI_DIV_8(pm1_register_bit_width); - - /* - * Adjust the lengths of the PM1 Event Blocks so that they can be used to - * access the PM1 status register(s). Use (width / 2) - */ - acpi_gbl_FADT.xpm1a_event_block.bit_width = pm1_register_bit_width; - acpi_gbl_FADT.xpm1b_event_block.bit_width = pm1_register_bit_width; - - /* - * Calculate separate GAS structs for the PM1 Enable registers. - * These addresses do not appear (directly) in the FADT, so it is - * useful to calculate them once, here. - * - * The PM event blocks are split into two register blocks, first is the - * PM Status Register block, followed immediately by the PM Enable - * Register block. Each is of length (xpm1x_event_block.bit_width/2). - * - * On various systems the v2 fields (and particularly the bit widths) - * cannot be relied upon, though. Hence resort to using the v1 length - * here (and warn about the inconsistency). - */ - if (acpi_gbl_FADT.xpm1a_event_block.bit_width - != acpi_gbl_FADT.pm1_event_length * 8) - printk(KERN_WARNING "FADT: " - "X_PM1a_EVT_BLK.bit_width (%u) does not match" - " PM1_EVT_LEN (%u)\n", - acpi_gbl_FADT.xpm1a_event_block.bit_width, - acpi_gbl_FADT.pm1_event_length); - - /* The PM1A register block is required */ - - acpi_tb_init_generic_address(&acpi_gbl_xpm1a_enable, - acpi_gbl_FADT.xpm1a_event_block.space_id, - pm1_register_byte_width, - (acpi_gbl_FADT.xpm1a_event_block.address + - pm1_register_byte_width)); - /* Don't forget to copy space_id of the GAS */ - acpi_gbl_xpm1a_enable.space_id = - acpi_gbl_FADT.xpm1a_event_block.space_id; - - /* The PM1B register block is optional, ignore if not present */ - - if (acpi_gbl_FADT.xpm1b_event_block.address) { - if (acpi_gbl_FADT.xpm1b_event_block.bit_width - != acpi_gbl_FADT.pm1_event_length * 8) - printk(KERN_WARNING "FADT: " - "X_PM1b_EVT_BLK.bit_width (%u) does not match" - " PM1_EVT_LEN (%u)\n", - acpi_gbl_FADT.xpm1b_event_block.bit_width, - acpi_gbl_FADT.pm1_event_length); - acpi_tb_init_generic_address(&acpi_gbl_xpm1b_enable, - acpi_gbl_FADT.xpm1b_event_block.space_id, - pm1_register_byte_width, - (acpi_gbl_FADT.xpm1b_event_block. - address + pm1_register_byte_width)); - /* Don't forget to copy space_id of the GAS */ - acpi_gbl_xpm1b_enable.space_id = - acpi_gbl_FADT.xpm1b_event_block.space_id; - - } } -/****************************************************************************** +/******************************************************************************* * * FUNCTION: acpi_tb_validate_fadt * @@ -525,18 +483,22 @@ static void acpi_tb_validate_fadt(void) (acpi_gbl_FADT.Xfacs != (u64) acpi_gbl_FADT.facs)) { ACPI_WARNING((AE_INFO, "32/64X FACS address mismatch in FADT - " - "two FACS tables! %8.8X/%8.8X%8.8X", + "%8.8X/%8.8X%8.8X, using 32", acpi_gbl_FADT.facs, ACPI_FORMAT_UINT64(acpi_gbl_FADT.Xfacs))); + + acpi_gbl_FADT.Xfacs = (u64) acpi_gbl_FADT.facs; } if (acpi_gbl_FADT.dsdt && (acpi_gbl_FADT.Xdsdt != (u64) acpi_gbl_FADT.dsdt)) { ACPI_WARNING((AE_INFO, "32/64X DSDT address mismatch in FADT - " - "two DSDT tables! %8.8X/%8.8X%8.8X", + "%8.8X/%8.8X%8.8X, using 32", acpi_gbl_FADT.dsdt, ACPI_FORMAT_UINT64(acpi_gbl_FADT.Xdsdt))); + + acpi_gbl_FADT.Xdsdt = (u64) acpi_gbl_FADT.dsdt; } /* Examine all of the 64-bit extended address fields (X fields) */ @@ -561,7 +523,8 @@ static void acpi_tb_validate_fadt(void) * For each extended field, check for length mismatch between the * legacy length field and the corresponding 64-bit X length field. */ - if (address64 && (address64->bit_width != ACPI_MUL_8(length))) { + if (address64->address && + (address64->bit_width != ACPI_MUL_8(length))) { ACPI_WARNING((AE_INFO, "32/64X length mismatch in %s: %d/%d", name, ACPI_MUL_8(length), @@ -575,7 +538,8 @@ static void acpi_tb_validate_fadt(void) */ if (!address64->address || !length) { ACPI_ERROR((AE_INFO, - "Required field %s has zero address and/or length: %8.8X%8.8X/%X", + "Required field %s has zero address and/or length:" + " %8.8X%8.8X/%X", name, ACPI_FORMAT_UINT64(address64-> address), @@ -584,27 +548,112 @@ static void acpi_tb_validate_fadt(void) } else if (fadt_info_table[i].type & ACPI_FADT_SEPARATE_LENGTH) { /* * Field is optional (PM2Control, GPE0, GPE1) AND has its own - * length field. If present, both the address and length must be valid. + * length field. If present, both the address and length must + * be valid. */ - if ((address64->address && !length) - || (!address64->address && length)) { + if ((address64->address && !length) || + (!address64->address && length)) { ACPI_WARNING((AE_INFO, - "Optional field %s has zero address or length: %8.8X%8.8X/%X", + "Optional field %s has zero address or length: " + "%8.8X%8.8X/%X", name, ACPI_FORMAT_UINT64(address64-> address), length)); } } + } +} - /* If both 32- and 64-bit addresses are valid (non-zero), they must match */ +/******************************************************************************* + * + * FUNCTION: acpi_tb_setup_fadt_registers + * + * PARAMETERS: None, uses acpi_gbl_FADT. + * + * RETURN: None + * + * DESCRIPTION: Initialize global ACPI PM1 register definitions. Optionally, + * force FADT register definitions to their default lengths. + * + ******************************************************************************/ - if (address64->address && *address32 && - (address64->address != (u64) * address32)) { - ACPI_ERROR((AE_INFO, - "32/64X address mismatch in %s: %8.8X/%8.8X%8.8X, using 64X", - name, *address32, - ACPI_FORMAT_UINT64(address64->address))); +static void acpi_tb_setup_fadt_registers(void) +{ + struct acpi_generic_address *target64; + struct acpi_generic_address *source64; + u8 pm1_register_byte_width; + u32 i; + + /* + * Optionally check all register lengths against the default values and + * update them if they are incorrect. + */ + if (acpi_gbl_use_default_register_widths) { + for (i = 0; i < ACPI_FADT_INFO_ENTRIES; i++) { + target64 = + ACPI_ADD_PTR(struct acpi_generic_address, + &acpi_gbl_FADT, + fadt_info_table[i].address64); + + /* + * If a valid register (Address != 0) and the (default_length > 0) + * (Not a GPE register), then check the width against the default. + */ + if ((target64->address) && + (fadt_info_table[i].default_length > 0) && + (fadt_info_table[i].default_length != + target64->bit_width)) { + ACPI_WARNING((AE_INFO, + "Invalid length for %s: %d, using default %d", + fadt_info_table[i].name, + target64->bit_width, + fadt_info_table[i]. + default_length)); + + /* Incorrect size, set width to the default */ + + target64->bit_width = + fadt_info_table[i].default_length; + } + } + } + + /* + * Get the length of the individual PM1 registers (enable and status). + * Each register is defined to be (event block length / 2). Extra divide + * by 8 converts bits to bytes. + */ + pm1_register_byte_width = (u8) + ACPI_DIV_16(acpi_gbl_FADT.xpm1a_event_block.bit_width); + + /* + * Calculate separate GAS structs for the PM1x (A/B) Status and Enable + * registers. These addresses do not appear (directly) in the FADT, so it + * is useful to pre-calculate them from the PM1 Event Block definitions. + * + * The PM event blocks are split into two register blocks, first is the + * PM Status Register block, followed immediately by the PM Enable + * Register block. Each is of length (pm1_event_length/2) + * + * Note: The PM1A event block is required by the ACPI specification. + * However, the PM1B event block is optional and is rarely, if ever, + * used. + */ + + for (i = 0; i < ACPI_FADT_PM_INFO_ENTRIES; i++) { + source64 = + ACPI_ADD_PTR(struct acpi_generic_address, &acpi_gbl_FADT, + fadt_pm_info_table[i].source); + + if (source64->address) { + acpi_tb_init_generic_address(fadt_pm_info_table[i]. + target, source64->space_id, + pm1_register_byte_width, + source64->address + + (fadt_pm_info_table[i]. + register_num * + pm1_register_byte_width)); } } } diff --git a/drivers/acpi/acpica/tbinstal.c b/drivers/acpi/acpica/tbinstal.c index 37374b21969..f865d5a096d 100644 --- a/drivers/acpi/acpica/tbinstal.c +++ b/drivers/acpi/acpica/tbinstal.c @@ -103,7 +103,9 @@ acpi_status acpi_tb_verify_table(struct acpi_table_desc *table_desc) * * RETURN: Status * - * DESCRIPTION: This function is called to add the ACPI table + * DESCRIPTION: This function is called to add an ACPI table. It is used to + * dynamically load tables via the Load and load_table AML + * operators. * ******************************************************************************/ @@ -112,6 +114,7 @@ acpi_tb_add_table(struct acpi_table_desc *table_desc, u32 *table_index) { u32 i; acpi_status status = AE_OK; + struct acpi_table_header *override_table = NULL; ACPI_FUNCTION_TRACE(tb_add_table); @@ -201,6 +204,29 @@ acpi_tb_add_table(struct acpi_table_desc *table_desc, u32 *table_index) } } + /* + * ACPI Table Override: + * Allow the host to override dynamically loaded tables. + */ + status = acpi_os_table_override(table_desc->pointer, &override_table); + if (ACPI_SUCCESS(status) && override_table) { + ACPI_INFO((AE_INFO, + "%4.4s @ 0x%p Table override, replaced with:", + table_desc->pointer->signature, + ACPI_CAST_PTR(void, table_desc->address))); + + /* We can delete the table that was passed as a parameter */ + + acpi_tb_delete_table(table_desc); + + /* Setup descriptor for the new table */ + + table_desc->address = ACPI_PTR_TO_PHYSADDR(override_table); + table_desc->pointer = override_table; + table_desc->length = override_table->length; + table_desc->flags = ACPI_TABLE_ORIGIN_OVERRIDE; + } + /* Add the table to the global root table list */ status = acpi_tb_store_table(table_desc->address, table_desc->pointer, @@ -247,8 +273,9 @@ acpi_status acpi_tb_resize_root_table_list(void) /* Increase the Table Array size */ tables = ACPI_ALLOCATE_ZEROED(((acpi_size) acpi_gbl_root_table_list. - size + ACPI_ROOT_TABLE_SIZE_INCREMENT) - * sizeof(struct acpi_table_desc)); + size + + ACPI_ROOT_TABLE_SIZE_INCREMENT) * + sizeof(struct acpi_table_desc)); if (!tables) { ACPI_ERROR((AE_INFO, "Could not allocate new root table array")); @@ -407,27 +434,56 @@ void acpi_tb_terminate(void) * * PARAMETERS: table_index - Table index * - * RETURN: None + * RETURN: Status * * DESCRIPTION: Delete all namespace objects created when this table was loaded. * ******************************************************************************/ -void acpi_tb_delete_namespace_by_owner(u32 table_index) +acpi_status acpi_tb_delete_namespace_by_owner(u32 table_index) { acpi_owner_id owner_id; + acpi_status status; + + ACPI_FUNCTION_TRACE(tb_delete_namespace_by_owner); + + status = acpi_ut_acquire_mutex(ACPI_MTX_TABLES); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + if (table_index >= acpi_gbl_root_table_list.count) { + + /* The table index does not exist */ - (void)acpi_ut_acquire_mutex(ACPI_MTX_TABLES); - if (table_index < acpi_gbl_root_table_list.count) { - owner_id = - acpi_gbl_root_table_list.tables[table_index].owner_id; - } else { (void)acpi_ut_release_mutex(ACPI_MTX_TABLES); - return; + return_ACPI_STATUS(AE_NOT_EXIST); } + /* Get the owner ID for this table, used to delete namespace nodes */ + + owner_id = acpi_gbl_root_table_list.tables[table_index].owner_id; (void)acpi_ut_release_mutex(ACPI_MTX_TABLES); + + /* + * Need to acquire the namespace writer lock to prevent interference + * with any concurrent namespace walks. The interpreter must be + * released during the deletion since the acquisition of the deletion + * lock may block, and also since the execution of a namespace walk + * must be allowed to use the interpreter. + */ + acpi_ut_release_mutex(ACPI_MTX_INTERPRETER); + status = acpi_ut_acquire_write_lock(&acpi_gbl_namespace_rw_lock); + acpi_ns_delete_namespace_by_owner(owner_id); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + acpi_ut_release_write_lock(&acpi_gbl_namespace_rw_lock); + + status = acpi_ut_acquire_mutex(ACPI_MTX_INTERPRETER); + return_ACPI_STATUS(status); } /******************************************************************************* @@ -535,8 +591,8 @@ u8 acpi_tb_is_table_loaded(u32 table_index) (void)acpi_ut_acquire_mutex(ACPI_MTX_TABLES); if (table_index < acpi_gbl_root_table_list.count) { is_loaded = (u8) - (acpi_gbl_root_table_list.tables[table_index]. - flags & ACPI_TABLE_IS_LOADED); + (acpi_gbl_root_table_list.tables[table_index].flags & + ACPI_TABLE_IS_LOADED); } (void)acpi_ut_release_mutex(ACPI_MTX_TABLES); diff --git a/drivers/acpi/acpica/tbutils.c b/drivers/acpi/acpica/tbutils.c index 22ce4898572..ef7d2c2d8f0 100644 --- a/drivers/acpi/acpica/tbutils.c +++ b/drivers/acpi/acpica/tbutils.c @@ -177,19 +177,23 @@ acpi_tb_print_table_header(acpi_physical_address address, struct acpi_table_header *header) { + /* + * The reason that the Address is cast to a void pointer is so that we + * can use %p which will work properly on both 32-bit and 64-bit hosts. + */ if (ACPI_COMPARE_NAME(header->signature, ACPI_SIG_FACS)) { - /* FACS only has signature and length fields of common table header */ + /* FACS only has signature and length fields */ - ACPI_INFO((AE_INFO, "%4.4s %08lX, %04X", - header->signature, (unsigned long)address, + ACPI_INFO((AE_INFO, "%4.4s %p %05X", + header->signature, ACPI_CAST_PTR(void, address), header->length)); } else if (ACPI_COMPARE_NAME(header->signature, ACPI_SIG_RSDP)) { /* RSDP has no common fields */ - ACPI_INFO((AE_INFO, "RSDP %08lX, %04X (r%d %6.6s)", - (unsigned long)address, + ACPI_INFO((AE_INFO, "RSDP %p %05X (v%.2d %6.6s)", + ACPI_CAST_PTR (void, address), (ACPI_CAST_PTR(struct acpi_table_rsdp, header)-> revision > 0) ? ACPI_CAST_PTR(struct acpi_table_rsdp, @@ -202,8 +206,8 @@ acpi_tb_print_table_header(acpi_physical_address address, /* Standard ACPI table with full common header */ ACPI_INFO((AE_INFO, - "%4.4s %08lX, %04X (r%d %6.6s %8.8s %8X %4.4s %8X)", - header->signature, (unsigned long)address, + "%4.4s %p %05X (v%.2d %6.6s %8.8s %08X %4.4s %08X)", + header->signature, ACPI_CAST_PTR (void, address), header->length, header->revision, header->oem_id, header->oem_table_id, header->oem_revision, header->asl_compiler_id, @@ -280,22 +284,28 @@ u8 acpi_tb_checksum(u8 *buffer, u32 length) * FUNCTION: acpi_tb_install_table * * PARAMETERS: Address - Physical address of DSDT or FACS - * Flags - Flags * Signature - Table signature, NULL if no need to * match * table_index - Index into root table array * * RETURN: None * - * DESCRIPTION: Install an ACPI table into the global data structure. + * DESCRIPTION: Install an ACPI table into the global data structure. The + * table override mechanism is implemented here to allow the host + * OS to replace any table before it is installed in the root + * table array. * ******************************************************************************/ void acpi_tb_install_table(acpi_physical_address address, - u8 flags, char *signature, u32 table_index) + char *signature, u32 table_index) { - struct acpi_table_header *table; + u8 flags; + acpi_status status; + struct acpi_table_header *table_to_install; + struct acpi_table_header *mapped_table; + struct acpi_table_header *override_table = NULL; if (!address) { ACPI_ERROR((AE_INFO, @@ -306,41 +316,69 @@ acpi_tb_install_table(acpi_physical_address address, /* Map just the table header */ - table = acpi_os_map_memory(address, sizeof(struct acpi_table_header)); - if (!table) { + mapped_table = + acpi_os_map_memory(address, sizeof(struct acpi_table_header)); + if (!mapped_table) { return; } - /* If a particular signature is expected, signature must match */ + /* If a particular signature is expected (DSDT/FACS), it must match */ - if (signature && !ACPI_COMPARE_NAME(table->signature, signature)) { + if (signature && !ACPI_COMPARE_NAME(mapped_table->signature, signature)) { ACPI_ERROR((AE_INFO, - "Invalid signature 0x%X for ACPI table [%s]", - *ACPI_CAST_PTR(u32, table->signature), signature)); + "Invalid signature 0x%X for ACPI table, expected [%s]", + *ACPI_CAST_PTR(u32, mapped_table->signature), + signature)); goto unmap_and_exit; } + /* + * ACPI Table Override: + * + * Before we install the table, let the host OS override it with a new + * one if desired. Any table within the RSDT/XSDT can be replaced, + * including the DSDT which is pointed to by the FADT. + */ + status = acpi_os_table_override(mapped_table, &override_table); + if (ACPI_SUCCESS(status) && override_table) { + ACPI_INFO((AE_INFO, + "%4.4s @ 0x%p Table override, replaced with:", + mapped_table->signature, ACPI_CAST_PTR(void, + address))); + + acpi_gbl_root_table_list.tables[table_index].pointer = + override_table; + address = ACPI_PTR_TO_PHYSADDR(override_table); + + table_to_install = override_table; + flags = ACPI_TABLE_ORIGIN_OVERRIDE; + } else { + table_to_install = mapped_table; + flags = ACPI_TABLE_ORIGIN_MAPPED; + } + /* Initialize the table entry */ acpi_gbl_root_table_list.tables[table_index].address = address; - acpi_gbl_root_table_list.tables[table_index].length = table->length; + acpi_gbl_root_table_list.tables[table_index].length = + table_to_install->length; acpi_gbl_root_table_list.tables[table_index].flags = flags; ACPI_MOVE_32_TO_32(& (acpi_gbl_root_table_list.tables[table_index]. - signature), table->signature); + signature), table_to_install->signature); - acpi_tb_print_table_header(address, table); + acpi_tb_print_table_header(address, table_to_install); if (table_index == ACPI_TABLE_INDEX_DSDT) { /* Global integer width is based upon revision of the DSDT */ - acpi_ut_set_integer_width(table->revision); + acpi_ut_set_integer_width(table_to_install->revision); } unmap_and_exit: - acpi_os_unmap_memory(table, sizeof(struct acpi_table_header)); + acpi_os_unmap_memory(mapped_table, sizeof(struct acpi_table_header)); } /******************************************************************************* @@ -379,7 +417,8 @@ acpi_tb_get_root_table_entry(u8 *table_entry, u32 table_entry_size) } else { /* * 32-bit platform, XSDT: Truncate 64-bit to 32-bit and return - * 64-bit platform, XSDT: Move (unaligned) 64-bit to local, return 64-bit + * 64-bit platform, XSDT: Move (unaligned) 64-bit to local, + * return 64-bit */ ACPI_MOVE_64_TO_64(&address64, table_entry); @@ -389,7 +428,8 @@ acpi_tb_get_root_table_entry(u8 *table_entry, u32 table_entry_size) /* Will truncate 64-bit address to 32 bits, issue warning */ ACPI_WARNING((AE_INFO, - "64-bit Physical Address in XSDT is too large (%8.8X%8.8X), truncating", + "64-bit Physical Address in XSDT is too large (%8.8X%8.8X)," + " truncating", ACPI_FORMAT_UINT64(address64))); } #endif @@ -402,7 +442,6 @@ acpi_tb_get_root_table_entry(u8 *table_entry, u32 table_entry_size) * FUNCTION: acpi_tb_parse_root_table * * PARAMETERS: Rsdp - Pointer to the RSDP - * Flags - Flags * * RETURN: Status * @@ -416,7 +455,7 @@ acpi_tb_get_root_table_entry(u8 *table_entry, u32 table_entry_size) ******************************************************************************/ acpi_status __init -acpi_tb_parse_root_table(acpi_physical_address rsdp_address, u8 flags) +acpi_tb_parse_root_table(acpi_physical_address rsdp_address) { struct acpi_table_rsdp *rsdp; u32 table_entry_size; @@ -513,13 +552,12 @@ acpi_tb_parse_root_table(acpi_physical_address rsdp_address, u8 flags) /* Calculate the number of tables described in the root table */ - table_count = - (u32) ((table->length - - sizeof(struct acpi_table_header)) / table_entry_size); - + table_count = (u32)((table->length - sizeof(struct acpi_table_header)) / + table_entry_size); /* - * First two entries in the table array are reserved for the DSDT and FACS, - * which are not actually present in the RSDT/XSDT - they come from the FADT + * First two entries in the table array are reserved for the DSDT + * and FACS, which are not actually present in the RSDT/XSDT - they + * come from the FADT */ table_entry = ACPI_CAST_PTR(u8, table) + sizeof(struct acpi_table_header); @@ -567,14 +605,14 @@ acpi_tb_parse_root_table(acpi_physical_address rsdp_address, u8 flags) */ for (i = 2; i < acpi_gbl_root_table_list.count; i++) { acpi_tb_install_table(acpi_gbl_root_table_list.tables[i]. - address, flags, NULL, i); + address, NULL, i); /* Special case for FADT - get the DSDT and FACS */ if (ACPI_COMPARE_NAME (&acpi_gbl_root_table_list.tables[i].signature, ACPI_SIG_FADT)) { - acpi_tb_parse_fadt(i, flags); + acpi_tb_parse_fadt(i); } } diff --git a/drivers/acpi/acpica/tbxface.c b/drivers/acpi/acpica/tbxface.c index ab0aff3c7d6..a88f02bd6c9 100644 --- a/drivers/acpi/acpica/tbxface.c +++ b/drivers/acpi/acpica/tbxface.c @@ -150,8 +150,7 @@ acpi_initialize_tables(struct acpi_table_desc * initial_table_array, * Root Table Array. This array contains the information of the RSDT/XSDT * in a common, more useable format. */ - status = - acpi_tb_parse_root_table(rsdp_address, ACPI_TABLE_ORIGIN_MAPPED); + status = acpi_tb_parse_root_table(rsdp_address); return_ACPI_STATUS(status); } @@ -247,7 +246,7 @@ acpi_status acpi_load_table(struct acpi_table_header *table_ptr) ACPI_EXPORT_SYMBOL(acpi_load_table) -/****************************************************************************** +/******************************************************************************* * * FUNCTION: acpi_get_table_header * @@ -262,7 +261,7 @@ ACPI_EXPORT_SYMBOL(acpi_load_table) * NOTE: Caller is responsible in unmapping the header with * acpi_os_unmap_memory * - *****************************************************************************/ + ******************************************************************************/ acpi_status acpi_get_table_header(char *signature, u32 instance, struct acpi_table_header *out_table_header) @@ -277,9 +276,8 @@ acpi_get_table_header(char *signature, return (AE_BAD_PARAMETER); } - /* - * Walk the root table list - */ + /* Walk the root table list */ + for (i = 0, j = 0; i < acpi_gbl_root_table_list.count; i++) { if (!ACPI_COMPARE_NAME (&(acpi_gbl_root_table_list.tables[i].signature), @@ -292,8 +290,8 @@ acpi_get_table_header(char *signature, } if (!acpi_gbl_root_table_list.tables[i].pointer) { - if ((acpi_gbl_root_table_list.tables[i]. - flags & ACPI_TABLE_ORIGIN_MASK) == + if ((acpi_gbl_root_table_list.tables[i].flags & + ACPI_TABLE_ORIGIN_MASK) == ACPI_TABLE_ORIGIN_MAPPED) { header = acpi_os_map_memory(acpi_gbl_root_table_list. @@ -324,7 +322,7 @@ acpi_get_table_header(char *signature, ACPI_EXPORT_SYMBOL(acpi_get_table_header) -/****************************************************************************** +/******************************************************************************* * * FUNCTION: acpi_unload_table_id * @@ -375,7 +373,7 @@ ACPI_EXPORT_SYMBOL(acpi_unload_table_id) * * DESCRIPTION: Finds and verifies an ACPI table. * - *****************************************************************************/ + ******************************************************************************/ acpi_status acpi_get_table_with_size(char *signature, u32 instance, struct acpi_table_header **out_table, @@ -391,9 +389,8 @@ acpi_get_table_with_size(char *signature, return (AE_BAD_PARAMETER); } - /* - * Walk the root table list - */ + /* Walk the root table list */ + for (i = 0, j = 0; i < acpi_gbl_root_table_list.count; i++) { if (!ACPI_COMPARE_NAME (&(acpi_gbl_root_table_list.tables[i].signature), @@ -502,7 +499,6 @@ ACPI_EXPORT_SYMBOL(acpi_get_table_by_index) static acpi_status acpi_tb_load_namespace(void) { acpi_status status; - struct acpi_table_header *table; u32 i; ACPI_FUNCTION_TRACE(tb_load_namespace); @@ -526,58 +522,28 @@ static acpi_status acpi_tb_load_namespace(void) goto unlock_and_exit; } - /* - * Find DSDT table - */ - status = - acpi_os_table_override(acpi_gbl_root_table_list. - tables[ACPI_TABLE_INDEX_DSDT].pointer, - &table); - if (ACPI_SUCCESS(status) && table) { - /* - * DSDT table has been found - */ - acpi_tb_delete_table(&acpi_gbl_root_table_list. - tables[ACPI_TABLE_INDEX_DSDT]); - acpi_gbl_root_table_list.tables[ACPI_TABLE_INDEX_DSDT].pointer = - table; - acpi_gbl_root_table_list.tables[ACPI_TABLE_INDEX_DSDT].length = - table->length; - acpi_gbl_root_table_list.tables[ACPI_TABLE_INDEX_DSDT].flags = - ACPI_TABLE_ORIGIN_UNKNOWN; - - ACPI_INFO((AE_INFO, "Table DSDT replaced by host OS")); - acpi_tb_print_table_header(0, table); - - if (no_auto_ssdt == 0) { - printk(KERN_WARNING "ACPI: DSDT override uses original SSDTs unless \"acpi_no_auto_ssdt\"\n"); - } - } + /* A valid DSDT is required */ status = acpi_tb_verify_table(&acpi_gbl_root_table_list. tables[ACPI_TABLE_INDEX_DSDT]); if (ACPI_FAILURE(status)) { - /* A valid DSDT is required */ - status = AE_NO_ACPI_TABLES; goto unlock_and_exit; } (void)acpi_ut_release_mutex(ACPI_MTX_TABLES); - /* - * Load and parse tables. - */ + /* Load and parse tables */ + status = acpi_ns_load_table(ACPI_TABLE_INDEX_DSDT, acpi_gbl_root_node); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } - /* - * Load any SSDT or PSDT tables. Note: Loop leaves tables locked - */ + /* Load any SSDT or PSDT tables. Note: Loop leaves tables locked */ + (void)acpi_ut_acquire_mutex(ACPI_MTX_TABLES); for (i = 0; i < acpi_gbl_root_table_list.count; ++i) { if ((!ACPI_COMPARE_NAME @@ -630,9 +596,8 @@ acpi_status acpi_load_tables(void) ACPI_FUNCTION_TRACE(acpi_load_tables); - /* - * Load the namespace from the tables - */ + /* Load the namespace from the tables */ + status = acpi_tb_load_namespace(); if (ACPI_FAILURE(status)) { ACPI_EXCEPTION((AE_INFO, status, diff --git a/drivers/acpi/acpica/tbxfroot.c b/drivers/acpi/acpica/tbxfroot.c index b7fc8dd4334..85ea834199e 100644 --- a/drivers/acpi/acpica/tbxfroot.c +++ b/drivers/acpi/acpica/tbxfroot.c @@ -75,8 +75,8 @@ static acpi_status acpi_tb_validate_rsdp(struct acpi_table_rsdp *rsdp) * Note: Sometimes there exists more than one RSDP in memory; the valid * RSDP has a valid checksum, all others have an invalid checksum. */ - if (ACPI_STRNCMP((char *)rsdp, ACPI_SIG_RSDP, sizeof(ACPI_SIG_RSDP) - 1) - != 0) { + if (ACPI_STRNCMP((char *)rsdp, ACPI_SIG_RSDP, + sizeof(ACPI_SIG_RSDP) - 1) != 0) { /* Nope, BAD Signature */ diff --git a/drivers/acpi/acpica/utcopy.c b/drivers/acpi/acpica/utcopy.c index b0dcfd3c872..919624f123d 100644 --- a/drivers/acpi/acpica/utcopy.c +++ b/drivers/acpi/acpica/utcopy.c @@ -135,11 +135,11 @@ acpi_ut_copy_isimple_to_esimple(union acpi_operand_object *internal_object, * In general, the external object will be the same type as * the internal object */ - external_object->type = ACPI_GET_OBJECT_TYPE(internal_object); + external_object->type = internal_object->common.type; /* However, only a limited number of external types are supported */ - switch (ACPI_GET_OBJECT_TYPE(internal_object)) { + switch (internal_object->common.type) { case ACPI_TYPE_STRING: external_object->string.pointer = (char *)data_space; @@ -222,8 +222,8 @@ acpi_ut_copy_isimple_to_esimple(union acpi_operand_object *internal_object, */ ACPI_ERROR((AE_INFO, "Unsupported object type, cannot convert to external object: %s", - acpi_ut_get_type_name(ACPI_GET_OBJECT_TYPE - (internal_object)))); + acpi_ut_get_type_name(internal_object->common. + type))); return_ACPI_STATUS(AE_SUPPORT); } @@ -355,7 +355,7 @@ acpi_ut_copy_ipackage_to_epackage(union acpi_operand_object *internal_object, info.object_space = 0; info.num_packages = 1; - external_object->type = ACPI_GET_OBJECT_TYPE(internal_object); + external_object->type = internal_object->common.type; external_object->package.count = internal_object->package.count; external_object->package.elements = ACPI_CAST_PTR(union acpi_object, info.free_space); @@ -399,7 +399,7 @@ acpi_ut_copy_iobject_to_eobject(union acpi_operand_object *internal_object, ACPI_FUNCTION_TRACE(ut_copy_iobject_to_eobject); - if (ACPI_GET_OBJECT_TYPE(internal_object) == ACPI_TYPE_PACKAGE) { + if (internal_object->common.type == ACPI_TYPE_PACKAGE) { /* * Package object: Copy all subobjects (including * nested packages) @@ -496,8 +496,9 @@ acpi_ut_copy_esimple_to_isimple(union acpi_object *external_object, case ACPI_TYPE_STRING: internal_object->string.pointer = - ACPI_ALLOCATE_ZEROED((acpi_size) external_object->string. - length + 1); + ACPI_ALLOCATE_ZEROED((acpi_size) + external_object->string.length + 1); + if (!internal_object->string.pointer) { goto error_exit; } @@ -697,7 +698,7 @@ acpi_ut_copy_simple_object(union acpi_operand_object *source_desc, /* Handle the objects with extra data */ - switch (ACPI_GET_OBJECT_TYPE(dest_desc)) { + switch (dest_desc->common.type) { case ACPI_TYPE_BUFFER: /* * Allocate and copy the actual buffer if and only if: @@ -814,8 +815,8 @@ acpi_ut_copy_ielement_to_ielement(u8 object_type, * This is a simple object, just copy it */ target_object = - acpi_ut_create_internal_object(ACPI_GET_OBJECT_TYPE - (source_object)); + acpi_ut_create_internal_object(source_object-> + common.type); if (!target_object) { return (AE_NO_MEMORY); } @@ -892,7 +893,7 @@ acpi_ut_copy_ipackage_to_ipackage(union acpi_operand_object *source_obj, ACPI_FUNCTION_TRACE(ut_copy_ipackage_to_ipackage); - dest_obj->common.type = ACPI_GET_OBJECT_TYPE(source_obj); + dest_obj->common.type = source_obj->common.type; dest_obj->common.flags = source_obj->common.flags; dest_obj->package.count = source_obj->package.count; @@ -950,15 +951,14 @@ acpi_ut_copy_iobject_to_iobject(union acpi_operand_object *source_desc, /* Create the top level object */ - *dest_desc = - acpi_ut_create_internal_object(ACPI_GET_OBJECT_TYPE(source_desc)); + *dest_desc = acpi_ut_create_internal_object(source_desc->common.type); if (!*dest_desc) { return_ACPI_STATUS(AE_NO_MEMORY); } /* Copy the object and possible subobjects */ - if (ACPI_GET_OBJECT_TYPE(source_desc) == ACPI_TYPE_PACKAGE) { + if (source_desc->common.type == ACPI_TYPE_PACKAGE) { status = acpi_ut_copy_ipackage_to_ipackage(source_desc, *dest_desc, walk_state); diff --git a/drivers/acpi/acpica/utdelete.c b/drivers/acpi/acpica/utdelete.c index a0be9e39531..a5ee23bc4f5 100644 --- a/drivers/acpi/acpica/utdelete.c +++ b/drivers/acpi/acpica/utdelete.c @@ -86,7 +86,7 @@ static void acpi_ut_delete_internal_obj(union acpi_operand_object *object) * Must delete or free any pointers within the object that are not * actual ACPI objects (for example, a raw buffer pointer). */ - switch (ACPI_GET_OBJECT_TYPE(object)) { + switch (object->common.type) { case ACPI_TYPE_STRING: ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS, @@ -382,7 +382,7 @@ acpi_ut_update_ref_count(union acpi_operand_object *object, u32 action) object, new_count)); } - if (ACPI_GET_OBJECT_TYPE(object) == ACPI_TYPE_METHOD) { + if (object->common.type == ACPI_TYPE_METHOD) { ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS, "Method Obj %p Refs=%X, [Decremented]\n", object, new_count)); @@ -469,7 +469,7 @@ acpi_ut_update_object_reference(union acpi_operand_object *object, u16 action) * All sub-objects must have their reference count incremented also. * Different object types have different subobjects. */ - switch (ACPI_GET_OBJECT_TYPE(object)) { + switch (object->common.type) { case ACPI_TYPE_DEVICE: case ACPI_TYPE_PROCESSOR: case ACPI_TYPE_POWER: diff --git a/drivers/acpi/acpica/uteval.c b/drivers/acpi/acpica/uteval.c index 9c9897dbe90..006b16c2601 100644 --- a/drivers/acpi/acpica/uteval.c +++ b/drivers/acpi/acpica/uteval.c @@ -59,26 +59,35 @@ acpi_ut_translate_one_cid(union acpi_operand_object *obj_desc, /* * Strings supported by the _OSI predefined (internal) method. + * + * March 2009: Removed "Linux" as this host no longer wants to respond true + * for this string. Basically, the only safe OS strings are windows-related + * and in many or most cases represent the only test path within the + * BIOS-provided ASL code. + * + * The second element of each entry is used to track the newest version of + * Windows that the BIOS has requested. */ -static char *acpi_interfaces_supported[] = { +static struct acpi_interface_info acpi_interfaces_supported[] = { /* Operating System Vendor Strings */ - "Windows 2000", /* Windows 2000 */ - "Windows 2001", /* Windows XP */ - "Windows 2001 SP1", /* Windows XP SP1 */ - "Windows 2001 SP2", /* Windows XP SP2 */ - "Windows 2001.1", /* Windows Server 2003 */ - "Windows 2001.1 SP1", /* Windows Server 2003 SP1 - Added 03/2006 */ - "Windows 2006", /* Windows Vista - Added 03/2006 */ + {"Windows 2000", ACPI_OSI_WIN_2000}, /* Windows 2000 */ + {"Windows 2001", ACPI_OSI_WIN_XP}, /* Windows XP */ + {"Windows 2001 SP1", ACPI_OSI_WIN_XP_SP1}, /* Windows XP SP1 */ + {"Windows 2001.1", ACPI_OSI_WINSRV_2003}, /* Windows Server 2003 */ + {"Windows 2001 SP2", ACPI_OSI_WIN_XP_SP2}, /* Windows XP SP2 */ + {"Windows 2001.1 SP1", ACPI_OSI_WINSRV_2003_SP1}, /* Windows Server 2003 SP1 - Added 03/2006 */ + {"Windows 2006", ACPI_OSI_WIN_VISTA}, /* Windows Vista - Added 03/2006 */ /* Feature Group Strings */ - "Extended Address Space Descriptor" - /* - * All "optional" feature group strings (features that are implemented - * by the host) should be implemented in the host version of - * acpi_os_validate_interface and should not be added here. - */ + {"Extended Address Space Descriptor", 0} + + /* + * All "optional" feature group strings (features that are implemented + * by the host) should be implemented in the host version of + * acpi_os_validate_interface and should not be added here. + */ }; /******************************************************************************* @@ -98,6 +107,7 @@ acpi_status acpi_ut_osi_implementation(struct acpi_walk_state *walk_state) acpi_status status; union acpi_operand_object *string_desc; union acpi_operand_object *return_desc; + u32 return_value; u32 i; ACPI_FUNCTION_TRACE(ut_osi_implementation); @@ -116,19 +126,28 @@ acpi_status acpi_ut_osi_implementation(struct acpi_walk_state *walk_state) return_ACPI_STATUS(AE_NO_MEMORY); } - /* Default return value is 0, NOT-SUPPORTED */ + /* Default return value is 0, NOT SUPPORTED */ - return_desc->integer.value = 0; - walk_state->return_desc = return_desc; + return_value = 0; /* Compare input string to static table of supported interfaces */ for (i = 0; i < ACPI_ARRAY_LENGTH(acpi_interfaces_supported); i++) { - if (!ACPI_STRCMP - (string_desc->string.pointer, - acpi_interfaces_supported[i])) { - return_desc->integer.value = ACPI_UINT32_MAX; - goto done; + if (!ACPI_STRCMP(string_desc->string.pointer, + acpi_interfaces_supported[i].name)) { + /* + * The interface is supported. + * Update the osi_data if necessary. We keep track of the latest + * version of Windows that has been requested by the BIOS. + */ + if (acpi_interfaces_supported[i].value > + acpi_gbl_osi_data) { + acpi_gbl_osi_data = + acpi_interfaces_supported[i].value; + } + + return_value = ACPI_UINT32_MAX; + goto exit; } } @@ -139,15 +158,22 @@ acpi_status acpi_ut_osi_implementation(struct acpi_walk_state *walk_state) */ status = acpi_os_validate_interface(string_desc->string.pointer); if (ACPI_SUCCESS(status)) { - return_desc->integer.value = ACPI_UINT32_MAX; + + /* The interface is supported */ + + return_value = ACPI_UINT32_MAX; } -done: - ACPI_DEBUG_PRINT_RAW((ACPI_DB_INFO, "ACPI: BIOS _OSI(%s) %ssupported\n", - string_desc->string.pointer, - return_desc->integer.value == 0 ? "not-" : "")); +exit: + ACPI_DEBUG_PRINT_RAW ((ACPI_DB_INFO, + "ACPI: BIOS _OSI(%s) is %ssupported\n", + string_desc->string.pointer, return_value == 0 ? "not " : "")); - return_ACPI_STATUS(AE_OK); + /* Complete the return value */ + + return_desc->integer.value = return_value; + walk_state->return_desc = return_desc; + return_ACPI_STATUS (AE_OK); } /******************************************************************************* @@ -167,8 +193,8 @@ acpi_status acpi_osi_invalidate(char *interface) int i; for (i = 0; i < ACPI_ARRAY_LENGTH(acpi_interfaces_supported); i++) { - if (!ACPI_STRCMP(interface, acpi_interfaces_supported[i])) { - *acpi_interfaces_supported[i] = '\0'; + if (!ACPI_STRCMP(interface, acpi_interfaces_supported[i].name)) { + *acpi_interfaces_supported[i].name = '\0'; return AE_OK; } } @@ -248,7 +274,7 @@ acpi_ut_evaluate_object(struct acpi_namespace_node *prefix_node, /* Map the return object type to the bitmapped type */ - switch (ACPI_GET_OBJECT_TYPE(info->return_object)) { + switch ((info->return_object)->common.type) { case ACPI_TYPE_INTEGER: return_btype = ACPI_BTYPE_INTEGER; break; @@ -418,7 +444,7 @@ acpi_ut_execute_HID(struct acpi_namespace_node *device_node, return_ACPI_STATUS(status); } - if (ACPI_GET_OBJECT_TYPE(obj_desc) == ACPI_TYPE_INTEGER) { + if (obj_desc->common.type == ACPI_TYPE_INTEGER) { /* Convert the Numeric HID to string */ @@ -459,7 +485,7 @@ acpi_ut_translate_one_cid(union acpi_operand_object *obj_desc, struct acpi_compatible_id *one_cid) { - switch (ACPI_GET_OBJECT_TYPE(obj_desc)) { + switch (obj_desc->common.type) { case ACPI_TYPE_INTEGER: /* Convert the Numeric CID to string */ @@ -527,7 +553,7 @@ acpi_ut_execute_CID(struct acpi_namespace_node * device_node, /* Get the number of _CIDs returned */ count = 1; - if (ACPI_GET_OBJECT_TYPE(obj_desc) == ACPI_TYPE_PACKAGE) { + if (obj_desc->common.type == ACPI_TYPE_PACKAGE) { count = obj_desc->package.count; } @@ -555,7 +581,7 @@ acpi_ut_execute_CID(struct acpi_namespace_node * device_node, /* The _CID object can be either a single CID or a package (list) of CIDs */ - if (ACPI_GET_OBJECT_TYPE(obj_desc) == ACPI_TYPE_PACKAGE) { + if (obj_desc->common.type == ACPI_TYPE_PACKAGE) { /* Translate each package element */ @@ -620,7 +646,7 @@ acpi_ut_execute_UID(struct acpi_namespace_node *device_node, return_ACPI_STATUS(status); } - if (ACPI_GET_OBJECT_TYPE(obj_desc) == ACPI_TYPE_INTEGER) { + if (obj_desc->common.type == ACPI_TYPE_INTEGER) { /* Convert the Numeric UID to string */ diff --git a/drivers/acpi/acpica/utglobal.c b/drivers/acpi/acpica/utglobal.c index a3ab9d9da29..59e46f257c0 100644 --- a/drivers/acpi/acpica/utglobal.c +++ b/drivers/acpi/acpica/utglobal.c @@ -294,12 +294,9 @@ struct acpi_bit_register_info acpi_gbl_bit_register_info[ACPI_NUM_BITREG] = { /* ACPI_BITREG_GLOBAL_LOCK_RELEASE */ {ACPI_REGISTER_PM1_CONTROL, ACPI_BITPOSITION_GLOBAL_LOCK_RELEASE, ACPI_BITMASK_GLOBAL_LOCK_RELEASE}, - /* ACPI_BITREG_SLEEP_TYPE_A */ {ACPI_REGISTER_PM1_CONTROL, - ACPI_BITPOSITION_SLEEP_TYPE_X, - ACPI_BITMASK_SLEEP_TYPE_X}, - /* ACPI_BITREG_SLEEP_TYPE_B */ {ACPI_REGISTER_PM1_CONTROL, - ACPI_BITPOSITION_SLEEP_TYPE_X, - ACPI_BITMASK_SLEEP_TYPE_X}, + /* ACPI_BITREG_SLEEP_TYPE */ {ACPI_REGISTER_PM1_CONTROL, + ACPI_BITPOSITION_SLEEP_TYPE, + ACPI_BITMASK_SLEEP_TYPE}, /* ACPI_BITREG_SLEEP_ENABLE */ {ACPI_REGISTER_PM1_CONTROL, ACPI_BITPOSITION_SLEEP_ENABLE, ACPI_BITMASK_SLEEP_ENABLE}, @@ -476,7 +473,7 @@ char *acpi_ut_get_object_type_name(union acpi_operand_object *obj_desc) return ("[NULL Object Descriptor]"); } - return (acpi_ut_get_type_name(ACPI_GET_OBJECT_TYPE(obj_desc))); + return (acpi_ut_get_type_name(obj_desc->common.type)); } /******************************************************************************* @@ -749,7 +746,10 @@ acpi_status acpi_ut_init_globals(void) for (i = 0; i < ACPI_NUM_OWNERID_MASKS; i++) { acpi_gbl_owner_id_mask[i] = 0; } - acpi_gbl_owner_id_mask[ACPI_NUM_OWNERID_MASKS - 1] = 0x80000000; /* Last ID is never valid */ + + /* Last owner_iD is never valid */ + + acpi_gbl_owner_id_mask[ACPI_NUM_OWNERID_MASKS - 1] = 0x80000000; /* GPE support */ @@ -789,6 +789,7 @@ acpi_status acpi_ut_init_globals(void) acpi_gbl_trace_dbg_layer = 0; acpi_gbl_debugger_configuration = DEBUGGER_THREADING; acpi_gbl_db_output_flags = ACPI_DB_CONSOLE_OUTPUT; + acpi_gbl_osi_data = 0; /* Hardware oriented */ diff --git a/drivers/acpi/acpica/utlock.c b/drivers/acpi/acpica/utlock.c new file mode 100644 index 00000000000..25e03120686 --- /dev/null +++ b/drivers/acpi/acpica/utlock.c @@ -0,0 +1,175 @@ +/****************************************************************************** + * + * Module Name: utlock - Reader/Writer lock interfaces + * + *****************************************************************************/ + +/* + * Copyright (C) 2000 - 2009, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include <acpi/acpi.h> +#include "accommon.h" + +#define _COMPONENT ACPI_UTILITIES +ACPI_MODULE_NAME("utlock") + +/******************************************************************************* + * + * FUNCTION: acpi_ut_create_rw_lock + * acpi_ut_delete_rw_lock + * + * PARAMETERS: Lock - Pointer to a valid RW lock + * + * RETURN: Status + * + * DESCRIPTION: Reader/writer lock creation and deletion interfaces. + * + ******************************************************************************/ +acpi_status acpi_ut_create_rw_lock(struct acpi_rw_lock *lock) +{ + acpi_status status; + + lock->num_readers = 0; + status = acpi_os_create_mutex(&lock->reader_mutex); + if (ACPI_FAILURE(status)) { + return status; + } + + status = acpi_os_create_mutex(&lock->writer_mutex); + return status; +} + +void acpi_ut_delete_rw_lock(struct acpi_rw_lock *lock) +{ + + acpi_os_delete_mutex(lock->reader_mutex); + acpi_os_delete_mutex(lock->writer_mutex); + + lock->num_readers = 0; + lock->reader_mutex = NULL; + lock->writer_mutex = NULL; +} + +/******************************************************************************* + * + * FUNCTION: acpi_ut_acquire_read_lock + * acpi_ut_release_read_lock + * + * PARAMETERS: Lock - Pointer to a valid RW lock + * + * RETURN: Status + * + * DESCRIPTION: Reader interfaces for reader/writer locks. On acquisition, + * only the first reader acquires the write mutex. On release, + * only the last reader releases the write mutex. Although this + * algorithm can in theory starve writers, this should not be a + * problem with ACPICA since the subsystem is infrequently used + * in comparison to (for example) an I/O system. + * + ******************************************************************************/ + +acpi_status acpi_ut_acquire_read_lock(struct acpi_rw_lock *lock) +{ + acpi_status status; + + status = acpi_os_acquire_mutex(lock->reader_mutex, ACPI_WAIT_FOREVER); + if (ACPI_FAILURE(status)) { + return status; + } + + /* Acquire the write lock only for the first reader */ + + lock->num_readers++; + if (lock->num_readers == 1) { + status = + acpi_os_acquire_mutex(lock->writer_mutex, + ACPI_WAIT_FOREVER); + } + + acpi_os_release_mutex(lock->reader_mutex); + return status; +} + +acpi_status acpi_ut_release_read_lock(struct acpi_rw_lock *lock) +{ + acpi_status status; + + status = acpi_os_acquire_mutex(lock->reader_mutex, ACPI_WAIT_FOREVER); + if (ACPI_FAILURE(status)) { + return status; + } + + /* Release the write lock only for the very last reader */ + + lock->num_readers--; + if (lock->num_readers == 0) { + acpi_os_release_mutex(lock->writer_mutex); + } + + acpi_os_release_mutex(lock->reader_mutex); + return status; +} + +/******************************************************************************* + * + * FUNCTION: acpi_ut_acquire_write_lock + * acpi_ut_release_write_lock + * + * PARAMETERS: Lock - Pointer to a valid RW lock + * + * RETURN: Status + * + * DESCRIPTION: Writer interfaces for reader/writer locks. Simply acquire or + * release the writer mutex associated with the lock. Acquisition + * of the lock is fully exclusive and will block all readers and + * writers until it is released. + * + ******************************************************************************/ + +acpi_status acpi_ut_acquire_write_lock(struct acpi_rw_lock *lock) +{ + acpi_status status; + + status = acpi_os_acquire_mutex(lock->writer_mutex, ACPI_WAIT_FOREVER); + return status; +} + +void acpi_ut_release_write_lock(struct acpi_rw_lock *lock) +{ + + acpi_os_release_mutex(lock->writer_mutex); +} diff --git a/drivers/acpi/acpica/utmisc.c b/drivers/acpi/acpica/utmisc.c index c1f7f4e1a72..1c9e250caef 100644 --- a/drivers/acpi/acpica/utmisc.c +++ b/drivers/acpi/acpica/utmisc.c @@ -938,8 +938,7 @@ acpi_ut_walk_package_tree(union acpi_operand_object * source_object, if ((!this_source_obj) || (ACPI_GET_DESCRIPTOR_TYPE(this_source_obj) != ACPI_DESC_TYPE_OPERAND) - || (ACPI_GET_OBJECT_TYPE(this_source_obj) != - ACPI_TYPE_PACKAGE)) { + || (this_source_obj->common.type != ACPI_TYPE_PACKAGE)) { status = walk_callback(ACPI_COPY_TYPE_SIMPLE, this_source_obj, state, context); diff --git a/drivers/acpi/acpica/utmutex.c b/drivers/acpi/acpica/utmutex.c index 14eb52c4d64..26c93a748e6 100644 --- a/drivers/acpi/acpica/utmutex.c +++ b/drivers/acpi/acpica/utmutex.c @@ -60,7 +60,8 @@ static acpi_status acpi_ut_delete_mutex(acpi_mutex_handle mutex_id); * * RETURN: Status * - * DESCRIPTION: Create the system mutex objects. + * DESCRIPTION: Create the system mutex objects. This includes mutexes, + * spin locks, and reader/writer locks. * ******************************************************************************/ @@ -71,9 +72,8 @@ acpi_status acpi_ut_mutex_initialize(void) ACPI_FUNCTION_TRACE(ut_mutex_initialize); - /* - * Create each of the predefined mutex objects - */ + /* Create each of the predefined mutex objects */ + for (i = 0; i < ACPI_NUM_MUTEX; i++) { status = acpi_ut_create_mutex(i); if (ACPI_FAILURE(status)) { @@ -86,6 +86,9 @@ acpi_status acpi_ut_mutex_initialize(void) spin_lock_init(acpi_gbl_gpe_lock); spin_lock_init(acpi_gbl_hardware_lock); + /* Create the reader/writer lock for namespace access */ + + status = acpi_ut_create_rw_lock(&acpi_gbl_namespace_rw_lock); return_ACPI_STATUS(status); } @@ -97,7 +100,8 @@ acpi_status acpi_ut_mutex_initialize(void) * * RETURN: None. * - * DESCRIPTION: Delete all of the system mutex objects. + * DESCRIPTION: Delete all of the system mutex objects. This includes mutexes, + * spin locks, and reader/writer locks. * ******************************************************************************/ @@ -107,9 +111,8 @@ void acpi_ut_mutex_terminate(void) ACPI_FUNCTION_TRACE(ut_mutex_terminate); - /* - * Delete each predefined mutex object - */ + /* Delete each predefined mutex object */ + for (i = 0; i < ACPI_NUM_MUTEX; i++) { (void)acpi_ut_delete_mutex(i); } @@ -118,6 +121,10 @@ void acpi_ut_mutex_terminate(void) acpi_os_delete_lock(acpi_gbl_gpe_lock); acpi_os_delete_lock(acpi_gbl_hardware_lock); + + /* Delete the reader/writer lock */ + + acpi_ut_delete_rw_lock(&acpi_gbl_namespace_rw_lock); return_VOID; } diff --git a/drivers/acpi/acpica/utobject.c b/drivers/acpi/acpica/utobject.c index fd5ea7543e5..0207b625274 100644 --- a/drivers/acpi/acpica/utobject.c +++ b/drivers/acpi/acpica/utobject.c @@ -310,7 +310,7 @@ u8 acpi_ut_valid_internal_object(void *object) /* Check for a null pointer */ if (!object) { - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "**** Null Object Ptr\n")); + ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "**** Null Object Ptr\n")); return (FALSE); } @@ -324,7 +324,7 @@ u8 acpi_ut_valid_internal_object(void *object) return (TRUE); default: - ACPI_DEBUG_PRINT((ACPI_DB_INFO, + ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "%p is not not an ACPI operand obj [%s]\n", object, acpi_ut_get_descriptor_name(object))); break; @@ -457,7 +457,7 @@ acpi_ut_get_simple_object_size(union acpi_operand_object *internal_object, * must be accessed bytewise or there may be alignment problems on * certain processors */ - switch (ACPI_GET_OBJECT_TYPE(internal_object)) { + switch (internal_object->common.type) { case ACPI_TYPE_STRING: length += (acpi_size) internal_object->string.length + 1; @@ -518,8 +518,7 @@ acpi_ut_get_simple_object_size(union acpi_operand_object *internal_object, ACPI_ERROR((AE_INFO, "Cannot convert to external object - " "unsupported type [%s] %X in object %p", acpi_ut_get_object_type_name(internal_object), - ACPI_GET_OBJECT_TYPE(internal_object), - internal_object)); + internal_object->common.type, internal_object)); status = AE_TYPE; break; } @@ -664,7 +663,7 @@ acpi_ut_get_object_size(union acpi_operand_object *internal_object, if ((ACPI_GET_DESCRIPTOR_TYPE(internal_object) == ACPI_DESC_TYPE_OPERAND) - && (ACPI_GET_OBJECT_TYPE(internal_object) == ACPI_TYPE_PACKAGE)) { + && (internal_object->common.type == ACPI_TYPE_PACKAGE)) { status = acpi_ut_get_package_object_size(internal_object, obj_length); |