summaryrefslogtreecommitdiffstats
path: root/drivers/acpi/executer/exprep.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/acpi/executer/exprep.c')
-rw-r--r--drivers/acpi/executer/exprep.c104
1 files changed, 69 insertions, 35 deletions
diff --git a/drivers/acpi/executer/exprep.c b/drivers/acpi/executer/exprep.c
index 264ef3bba31..c9e3c68b554 100644
--- a/drivers/acpi/executer/exprep.c
+++ b/drivers/acpi/executer/exprep.c
@@ -52,8 +52,23 @@
#define _COMPONENT ACPI_EXECUTER
ACPI_MODULE_NAME ("exprep")
+/* Local prototypes */
+
+static u32
+acpi_ex_decode_field_access (
+ union acpi_operand_object *obj_desc,
+ u8 field_flags,
+ u32 *return_byte_alignment);
+
#ifdef ACPI_UNDER_DEVELOPMENT
+
+static u32
+acpi_ex_generate_access (
+ u32 field_bit_offset,
+ u32 field_bit_length,
+ u32 region_length);
+
/*******************************************************************************
*
* FUNCTION: acpi_ex_generate_access
@@ -99,12 +114,14 @@ acpi_ex_generate_access (
/* Round Field start offset and length to "minimal" byte boundaries */
field_byte_offset = ACPI_DIV_8 (ACPI_ROUND_DOWN (field_bit_offset, 8));
- field_byte_end_offset = ACPI_DIV_8 (ACPI_ROUND_UP (field_bit_length + field_bit_offset, 8));
+ field_byte_end_offset = ACPI_DIV_8 (ACPI_ROUND_UP (field_bit_length +
+ field_bit_offset, 8));
field_byte_length = field_byte_end_offset - field_byte_offset;
ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
"Bit length %d, Bit offset %d\n",
field_bit_length, field_bit_offset));
+
ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
"Byte Length %d, Byte Offset %d, End Offset %d\n",
field_byte_length, field_byte_offset, field_byte_end_offset));
@@ -117,20 +134,26 @@ acpi_ex_generate_access (
*/
for (access_byte_width = 1; access_byte_width <= 8; access_byte_width <<= 1) {
/*
- * 1) Round end offset up to next access boundary and make sure that this
- * does not go beyond the end of the parent region.
- * 2) When the Access width is greater than the field_byte_length, we are done.
- * (This does not optimize for the perfectly aligned case yet).
+ * 1) Round end offset up to next access boundary and make sure that
+ * this does not go beyond the end of the parent region.
+ * 2) When the Access width is greater than the field_byte_length, we
+ * are done. (This does not optimize for the perfectly aligned
+ * case yet).
*/
if (ACPI_ROUND_UP (field_byte_end_offset, access_byte_width) <= region_length) {
- field_start_offset = ACPI_ROUND_DOWN (field_byte_offset, access_byte_width) /
- access_byte_width;
- field_end_offset = ACPI_ROUND_UP ((field_byte_length + field_byte_offset),
- access_byte_width) / access_byte_width;
- accesses = field_end_offset - field_start_offset;
+ field_start_offset =
+ ACPI_ROUND_DOWN (field_byte_offset, access_byte_width) /
+ access_byte_width;
+
+ field_end_offset =
+ ACPI_ROUND_UP ((field_byte_length + field_byte_offset),
+ access_byte_width) / access_byte_width;
+
+ accesses = field_end_offset - field_start_offset;
ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
"access_width %d end is within region\n", access_byte_width));
+
ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
"Field Start %d, Field End %d -- requires %d accesses\n",
field_start_offset, field_end_offset, accesses));
@@ -139,8 +162,8 @@ acpi_ex_generate_access (
if (accesses <= 1) {
ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
- "Entire field can be accessed with one operation of size %d\n",
- access_byte_width));
+ "Entire field can be accessed with one operation of size %d\n",
+ access_byte_width));
return_VALUE (access_byte_width);
}
@@ -155,15 +178,20 @@ acpi_ex_generate_access (
}
else {
ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
- "access_width %d end is NOT within region\n", access_byte_width));
+ "access_width %d end is NOT within region\n", access_byte_width));
if (access_byte_width == 1) {
ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
"Field goes beyond end-of-region!\n"));
- return_VALUE (0); /* Field does not fit in the region at all */
- }
- /* This width goes beyond the end-of-region, back off to previous access */
+ /* Field does not fit in the region at all */
+ return_VALUE (0);
+ }
+
+ /*
+ * This width goes beyond the end-of-region, back off to
+ * previous access
+ */
ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
"Backing off to previous optimal access width of %d\n",
minimum_access_width));
@@ -171,8 +199,10 @@ acpi_ex_generate_access (
}
}
- /* Could not read/write field with one operation, just use max access width */
-
+ /*
+ * Could not read/write field with one operation,
+ * just use max access width
+ */
ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
"Cannot access field in one operation, using width 8\n"));
return_VALUE (8);
@@ -184,8 +214,9 @@ acpi_ex_generate_access (
*
* FUNCTION: acpi_ex_decode_field_access
*
- * PARAMETERS: Access - Encoded field access bits
- * Length - Field length.
+ * PARAMETERS: obj_desc - Field object
+ * field_flags - Encoded fieldflags (contains access bits)
+ * return_byte_alignment - Where the byte alignment is returned
*
* RETURN: Field granularity (8, 16, 32 or 64) and
* byte_alignment (1, 2, 3, or 4)
@@ -214,9 +245,10 @@ acpi_ex_decode_field_access (
case AML_FIELD_ACCESS_ANY:
#ifdef ACPI_UNDER_DEVELOPMENT
- byte_alignment = acpi_ex_generate_access (obj_desc->common_field.start_field_bit_offset,
- obj_desc->common_field.bit_length,
- 0xFFFFFFFF /* Temp until we pass region_length as param */);
+ byte_alignment =
+ acpi_ex_generate_access (obj_desc->common_field.start_field_bit_offset,
+ obj_desc->common_field.bit_length,
+ 0xFFFFFFFF /* Temp until we pass region_length as parameter */);
bit_length = byte_alignment * 8;
#endif
@@ -276,6 +308,7 @@ acpi_ex_decode_field_access (
* field_flags - Access, lock_rule, and update_rule.
* The format of a field_flag is described
* in the ACPI specification
+ * field_attribute - Special attributes (not used)
* field_bit_position - Field start position
* field_bit_length - Field length in number of bits
*
@@ -337,7 +370,7 @@ acpi_ex_prep_common_field_object (
/* Setup width (access granularity) fields */
obj_desc->common_field.access_byte_width = (u8)
- ACPI_DIV_8 (access_bit_width); /* 1, 2, 4, 8 */
+ ACPI_DIV_8 (access_bit_width); /* 1, 2, 4, 8 */
obj_desc->common_field.access_bit_width = (u8) access_bit_width;
@@ -380,11 +413,7 @@ acpi_ex_prep_common_field_object (
*
* FUNCTION: acpi_ex_prep_field_value
*
- * PARAMETERS: Node - Owning Node
- * region_node - Region in which field is being defined
- * field_flags - Access, lock_rule, and update_rule.
- * field_bit_position - Field start position
- * field_bit_length - Field length in number of bits
+ * PARAMETERS: Info - Contains all field creation info
*
* RETURN: Status
*
@@ -445,7 +474,7 @@ acpi_ex_prep_field_value (
switch (info->field_type) {
case ACPI_TYPE_LOCAL_REGION_FIELD:
- obj_desc->field.region_obj = acpi_ns_get_attached_object (info->region_node);
+ obj_desc->field.region_obj = acpi_ns_get_attached_object (info->region_node);
/* An additional reference for the container */
@@ -461,8 +490,10 @@ acpi_ex_prep_field_value (
case ACPI_TYPE_LOCAL_BANK_FIELD:
obj_desc->bank_field.value = info->bank_value;
- obj_desc->bank_field.region_obj = acpi_ns_get_attached_object (info->region_node);
- obj_desc->bank_field.bank_obj = acpi_ns_get_attached_object (info->register_node);
+ obj_desc->bank_field.region_obj = acpi_ns_get_attached_object (
+ info->region_node);
+ obj_desc->bank_field.bank_obj = acpi_ns_get_attached_object (
+ info->register_node);
/* An additional reference for the attached objects */
@@ -481,10 +512,13 @@ acpi_ex_prep_field_value (
case ACPI_TYPE_LOCAL_INDEX_FIELD:
- obj_desc->index_field.index_obj = acpi_ns_get_attached_object (info->register_node);
- obj_desc->index_field.data_obj = acpi_ns_get_attached_object (info->data_register_node);
+ obj_desc->index_field.index_obj = acpi_ns_get_attached_object (
+ info->register_node);
+ obj_desc->index_field.data_obj = acpi_ns_get_attached_object (
+ info->data_register_node);
obj_desc->index_field.value = (u32)
- (info->field_bit_position / ACPI_MUL_8 (obj_desc->field.access_byte_width));
+ (info->field_bit_position / ACPI_MUL_8 (
+ obj_desc->field.access_byte_width));
if (!obj_desc->index_field.data_obj || !obj_desc->index_field.index_obj) {
ACPI_REPORT_ERROR (("Null Index Object during field prep\n"));
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-28 19:28:02 +0000