diff options
Diffstat (limited to 'drivers/acpi/executer/exstore.c')
| -rw-r--r-- | drivers/acpi/executer/exstore.c | 536 |
1 files changed, 536 insertions, 0 deletions
diff --git a/drivers/acpi/executer/exstore.c b/drivers/acpi/executer/exstore.c new file mode 100644 index 00000000000..e0fc6aba125 --- /dev/null +++ b/drivers/acpi/executer/exstore.c @@ -0,0 +1,536 @@ + +/****************************************************************************** + * + * Module Name: exstore - AML Interpreter object store support + * + *****************************************************************************/ + +/* + * Copyright (C) 2000 - 2005, R. Byron Moore + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + + +#include <acpi/acpi.h> +#include <acpi/acdispat.h> +#include <acpi/acinterp.h> +#include <acpi/amlcode.h> +#include <acpi/acnamesp.h> + + +#define _COMPONENT ACPI_EXECUTER + ACPI_MODULE_NAME ("exstore") + + +/******************************************************************************* + * + * FUNCTION: acpi_ex_store + * + * PARAMETERS: *source_desc - Value to be stored + * *dest_desc - Where to store it. Must be an NS node + * or an union acpi_operand_object of type + * Reference; + * walk_state - Current walk state + * + * RETURN: Status + * + * DESCRIPTION: Store the value described by source_desc into the location + * described by dest_desc. Called by various interpreter + * functions to store the result of an operation into + * the destination operand -- not just simply the actual "Store" + * ASL operator. + * + ******************************************************************************/ + +acpi_status +acpi_ex_store ( + union acpi_operand_object *source_desc, + union acpi_operand_object *dest_desc, + struct acpi_walk_state *walk_state) +{ + acpi_status status = AE_OK; + union acpi_operand_object *ref_desc = dest_desc; + + + ACPI_FUNCTION_TRACE_PTR ("ex_store", dest_desc); + + + /* Validate parameters */ + + if (!source_desc || !dest_desc) { + ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Null parameter\n")); + return_ACPI_STATUS (AE_AML_NO_OPERAND); + } + + /* dest_desc can be either a namespace node or an ACPI object */ + + if (ACPI_GET_DESCRIPTOR_TYPE (dest_desc) == ACPI_DESC_TYPE_NAMED) { + /* + * Dest is a namespace node, + * Storing an object into a Named node. + */ + status = acpi_ex_store_object_to_node (source_desc, + (struct acpi_namespace_node *) dest_desc, walk_state, + ACPI_IMPLICIT_CONVERSION); + + return_ACPI_STATUS (status); + } + + /* Destination object must be a Reference or a Constant object */ + + switch (ACPI_GET_OBJECT_TYPE (dest_desc)) { + case ACPI_TYPE_LOCAL_REFERENCE: + break; + + case ACPI_TYPE_INTEGER: + + /* Allow stores to Constants -- a Noop as per ACPI spec */ + + if (dest_desc->common.flags & AOPOBJ_AML_CONSTANT) { + return_ACPI_STATUS (AE_OK); + } + + /*lint -fallthrough */ + + default: + + /* Destination is not a Reference object */ + + ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, + "Target is not a Reference or Constant object - %s [%p]\n", + acpi_ut_get_object_type_name (dest_desc), dest_desc)); + + ACPI_DUMP_STACK_ENTRY (source_desc); + ACPI_DUMP_STACK_ENTRY (dest_desc); + ACPI_DUMP_OPERANDS (&dest_desc, ACPI_IMODE_EXECUTE, "ex_store", + 2, "Target is not a Reference or Constant object"); + + return_ACPI_STATUS (AE_AML_OPERAND_TYPE); + } + + /* + * Examine the Reference opcode. These cases are handled: + * + * 1) Store to Name (Change the object associated with a name) + * 2) Store to an indexed area of a Buffer or Package + * 3) Store to a Method Local or Arg + * 4) Store to the debug object + */ + switch (ref_desc->reference.opcode) { + case AML_NAME_OP: + case AML_REF_OF_OP: + + /* Storing an object into a Name "container" */ + + status = acpi_ex_store_object_to_node (source_desc, ref_desc->reference.object, + walk_state, ACPI_IMPLICIT_CONVERSION); + break; + + + case AML_INDEX_OP: + + /* Storing to an Index (pointer into a packager or buffer) */ + + status = acpi_ex_store_object_to_index (source_desc, ref_desc, walk_state); + break; + + + case AML_LOCAL_OP: + case AML_ARG_OP: + + /* Store to a method local/arg */ + + status = acpi_ds_store_object_to_local (ref_desc->reference.opcode, + ref_desc->reference.offset, source_desc, walk_state); + break; + + + case AML_DEBUG_OP: + + /* + * Storing to the Debug object causes the value stored to be + * displayed and otherwise has no effect -- see ACPI Specification + */ + ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, + "**** Write to Debug Object: Object %p %s ****:\n\n", + source_desc, acpi_ut_get_object_type_name (source_desc))); + + ACPI_DEBUG_PRINT_RAW ((ACPI_DB_DEBUG_OBJECT, "[ACPI Debug] %s: ", + acpi_ut_get_object_type_name (source_desc))); + + if (!acpi_ut_valid_internal_object (source_desc)) { + ACPI_DEBUG_PRINT_RAW ((ACPI_DB_DEBUG_OBJECT, + "%p, Invalid Internal Object!\n", source_desc)); + break; + } + + switch (ACPI_GET_OBJECT_TYPE (source_desc)) { + case ACPI_TYPE_INTEGER: + + if (acpi_gbl_integer_byte_width == 4) { + ACPI_DEBUG_PRINT_RAW ((ACPI_DB_DEBUG_OBJECT, "0x%8.8X\n", + (u32) source_desc->integer.value)); + } + else { + ACPI_DEBUG_PRINT_RAW ((ACPI_DB_DEBUG_OBJECT, "0x%8.8X%8.8X\n", + ACPI_FORMAT_UINT64 (source_desc->integer.value))); + } + break; + + + case ACPI_TYPE_BUFFER: + + ACPI_DEBUG_PRINT_RAW ((ACPI_DB_DEBUG_OBJECT, "[0x%.2X]", + (u32) source_desc->buffer.length)); + ACPI_DUMP_BUFFER (source_desc->buffer.pointer, + (source_desc->buffer.length < 32) ? source_desc->buffer.length : 32); + break; + + + case ACPI_TYPE_STRING: + + ACPI_DEBUG_PRINT_RAW ((ACPI_DB_DEBUG_OBJECT, "[0x%.2X] \"%s\"\n", + source_desc->string.length, source_desc->string.pointer)); + break; + + + case ACPI_TYPE_PACKAGE: + + ACPI_DEBUG_PRINT_RAW ((ACPI_DB_DEBUG_OBJECT, "[0x%.2X] Elements Ptr - %p\n", + source_desc->package.count, source_desc->package.elements)); + break; + + + default: + + ACPI_DEBUG_PRINT_RAW ((ACPI_DB_DEBUG_OBJECT, "%p\n", + source_desc)); + break; + } + + ACPI_DEBUG_PRINT_RAW ((ACPI_DB_EXEC, "\n")); + break; + + + default: + + ACPI_REPORT_ERROR (("ex_store: Unknown Reference opcode %X\n", + ref_desc->reference.opcode)); + ACPI_DUMP_ENTRY (ref_desc, ACPI_LV_ERROR); + + status = AE_AML_INTERNAL; + break; + } + + return_ACPI_STATUS (status); +} + + +/******************************************************************************* + * + * FUNCTION: acpi_ex_store_object_to_index + * + * PARAMETERS: *source_desc - Value to be stored + * *dest_desc - Named object to receive the value + * walk_state - Current walk state + * + * RETURN: Status + * + * DESCRIPTION: Store the object to indexed Buffer or Package element + * + ******************************************************************************/ + +acpi_status +acpi_ex_store_object_to_index ( + union acpi_operand_object *source_desc, + union acpi_operand_object *index_desc, + struct acpi_walk_state *walk_state) +{ + acpi_status status = AE_OK; + union acpi_operand_object *obj_desc; + union acpi_operand_object *new_desc; + u8 value = 0; + u32 i; + + + ACPI_FUNCTION_TRACE ("ex_store_object_to_index"); + + + /* + * Destination must be a reference pointer, and + * must point to either a buffer or a package + */ + switch (index_desc->reference.target_type) { + case ACPI_TYPE_PACKAGE: + /* + * Storing to a package element. Copy the object and replace + * any existing object with the new object. No implicit + * conversion is performed. + * + * The object at *(index_desc->Reference.Where) is the + * element within the package that is to be modified. + * The parent package object is at index_desc->Reference.Object + */ + obj_desc = *(index_desc->reference.where); + + status = acpi_ut_copy_iobject_to_iobject (source_desc, &new_desc, walk_state); + if (ACPI_FAILURE (status)) { + return_ACPI_STATUS (status); + } + + if (obj_desc) { + /* Decrement reference count by the ref count of the parent package */ + + for (i = 0; i < ((union acpi_operand_object *) index_desc->reference.object)->common.reference_count; i++) { + acpi_ut_remove_reference (obj_desc); + } + } + + *(index_desc->reference.where) = new_desc; + + /* Increment reference count by the ref count of the parent package -1 */ + + for (i = 1; i < ((union acpi_operand_object *) index_desc->reference.object)->common.reference_count; i++) { + acpi_ut_add_reference (new_desc); + } + + break; + + + case ACPI_TYPE_BUFFER_FIELD: + + /* + * Store into a Buffer or String (not actually a real buffer_field) + * at a location defined by an Index. + * + * The first 8-bit element of the source object is written to the + * 8-bit Buffer location defined by the Index destination object, + * according to the ACPI 2.0 specification. + */ + + /* + * Make sure the target is a Buffer or String. An error should + * not happen here, since the reference_object was constructed + * by the INDEX_OP code. + */ + obj_desc = index_desc->reference.object; + if ((ACPI_GET_OBJECT_TYPE (obj_desc) != ACPI_TYPE_BUFFER) && + (ACPI_GET_OBJECT_TYPE (obj_desc) != ACPI_TYPE_STRING)) { + return_ACPI_STATUS (AE_AML_OPERAND_TYPE); + } + + /* + * The assignment of the individual elements will be slightly + * different for each source type. + */ + switch (ACPI_GET_OBJECT_TYPE (source_desc)) { + case ACPI_TYPE_INTEGER: + + /* Use the least-significant byte of the integer */ + + value = (u8) (source_desc->integer.value); + break; + + case ACPI_TYPE_BUFFER: + case ACPI_TYPE_STRING: + + /* Note: Takes advantage of common string/buffer fields */ + + value = source_desc->buffer.pointer[0]; + break; + + default: + + /* All other types are invalid */ + + ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, + "Source must be Integer/Buffer/String type, not %s\n", + acpi_ut_get_object_type_name (source_desc))); + return_ACPI_STATUS (AE_AML_OPERAND_TYPE); + } + + /* Store the source value into the target buffer byte */ + + obj_desc->buffer.pointer[index_desc->reference.offset] = value; + break; + + + default: + ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, + "Target is not a Package or buffer_field\n")); + status = AE_AML_OPERAND_TYPE; + break; + } + + return_ACPI_STATUS (status); +} + + +/******************************************************************************* + * + * FUNCTION: acpi_ex_store_object_to_node + * + * PARAMETERS: source_desc - Value to be stored + * Node - Named object to receive the value + * walk_state - Current walk state + * implicit_conversion - Perform implicit conversion (yes/no) + * + * RETURN: Status + * + * DESCRIPTION: Store the object to the named object. + * + * The Assignment of an object to a named object is handled here + * The value passed in will replace the current value (if any) + * with the input value. + * + * When storing into an object the data is converted to the + * target object type then stored in the object. This means + * that the target object type (for an initialized target) will + * not be changed by a store operation. + * + * Assumes parameters are already validated. + * + ******************************************************************************/ + +acpi_status +acpi_ex_store_object_to_node ( + union acpi_operand_object *source_desc, + struct acpi_namespace_node *node, + struct acpi_walk_state *walk_state, + u8 implicit_conversion) +{ + acpi_status status = AE_OK; + union acpi_operand_object *target_desc; + union acpi_operand_object *new_desc; + acpi_object_type target_type; + + + ACPI_FUNCTION_TRACE_PTR ("ex_store_object_to_node", source_desc); + + + /* + * Get current type of the node, and object attached to Node + */ + target_type = acpi_ns_get_type (node); + target_desc = acpi_ns_get_attached_object (node); + + ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "Storing %p(%s) into node %p(%s)\n", + source_desc, acpi_ut_get_object_type_name (source_desc), + node, acpi_ut_get_type_name (target_type))); + + /* + * Resolve the source object to an actual value + * (If it is a reference object) + */ + status = acpi_ex_resolve_object (&source_desc, target_type, walk_state); + if (ACPI_FAILURE (status)) { + return_ACPI_STATUS (status); + } + + /* If no implicit conversion, drop into the default case below */ + + if (!implicit_conversion) { + /* Force execution of default (no implicit conversion) */ + + target_type = ACPI_TYPE_ANY; + } + + /* + * Do the actual store operation + */ + switch (target_type) { + case ACPI_TYPE_BUFFER_FIELD: + case ACPI_TYPE_LOCAL_REGION_FIELD: + case ACPI_TYPE_LOCAL_BANK_FIELD: + case ACPI_TYPE_LOCAL_INDEX_FIELD: + + /* + * For fields, copy the source data to the target field. + */ + status = acpi_ex_write_data_to_field (source_desc, target_desc, &walk_state->result_obj); + break; + + + case ACPI_TYPE_INTEGER: + case ACPI_TYPE_STRING: + case ACPI_TYPE_BUFFER: + + /* + * These target types are all of type Integer/String/Buffer, and + * therefore support implicit conversion before the store. + * + * Copy and/or convert the source object to a new target object + */ + status = acpi_ex_store_object_to_object (source_desc, target_desc, &new_desc, walk_state); + if (ACPI_FAILURE (status)) { + return_ACPI_STATUS (status); + } + + if (new_desc != target_desc) { + /* + * Store the new new_desc as the new value of the Name, and set + * the Name's type to that of the value being stored in it. + * source_desc reference count is incremented by attach_object. + * + * Note: This may change the type of the node if an explicit store + * has been performed such that the node/object type has been + * changed. + */ + status = acpi_ns_attach_object (node, new_desc, new_desc->common.type); + + ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, + "Store %s into %s via Convert/Attach\n", + acpi_ut_get_object_type_name (source_desc), + acpi_ut_get_object_type_name (new_desc))); + } + break; + + + default: + + ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, + "Storing %s (%p) directly into node (%p), no implicit conversion\n", + acpi_ut_get_object_type_name (source_desc), source_desc, node)); + + /* No conversions for all other types. Just attach the source object */ + + status = acpi_ns_attach_object (node, source_desc, ACPI_GET_OBJECT_TYPE (source_desc)); + break; + } + + return_ACPI_STATUS (status); +} + + |