diff options
Diffstat (limited to 'drivers/acpi/sleep.c')
| -rw-r--r-- | drivers/acpi/sleep.c | 101 |
1 files changed, 31 insertions, 70 deletions
diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index dca8074b670..fdcdbb65291 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -28,34 +28,6 @@ #include "internal.h" #include "sleep.h" -u8 wake_sleep_flags = ACPI_NO_OPTIONAL_METHODS; -static unsigned int gts, bfs; -static int set_param_wake_flag(const char *val, struct kernel_param *kp) -{ - int ret = param_set_int(val, kp); - - if (ret) - return ret; - - if (kp->arg == (const char *)>s) { - if (gts) - wake_sleep_flags |= ACPI_EXECUTE_GTS; - else - wake_sleep_flags &= ~ACPI_EXECUTE_GTS; - } - if (kp->arg == (const char *)&bfs) { - if (bfs) - wake_sleep_flags |= ACPI_EXECUTE_BFS; - else - wake_sleep_flags &= ~ACPI_EXECUTE_BFS; - } - return ret; -} -module_param_call(gts, set_param_wake_flag, param_get_int, >s, 0644); -module_param_call(bfs, set_param_wake_flag, param_get_int, &bfs, 0644); -MODULE_PARM_DESC(gts, "Enable evaluation of _GTS on suspend."); -MODULE_PARM_DESC(bfs, "Enable evaluation of _BFS on resume".); - static u8 sleep_states[ACPI_S_STATE_COUNT]; static void acpi_sleep_tts_switch(u32 acpi_state) @@ -143,7 +115,7 @@ void __init acpi_old_suspend_ordering(void) static int acpi_pm_freeze(void) { acpi_disable_all_gpes(); - acpi_os_wait_events_complete(NULL); + acpi_os_wait_events_complete(); acpi_ec_block_transactions(); return 0; } @@ -305,7 +277,7 @@ static int acpi_suspend_enter(suspend_state_t pm_state) switch (acpi_state) { case ACPI_STATE_S1: barrier(); - status = acpi_enter_sleep_state(acpi_state, wake_sleep_flags); + status = acpi_enter_sleep_state(acpi_state); break; case ACPI_STATE_S3: @@ -319,8 +291,8 @@ static int acpi_suspend_enter(suspend_state_t pm_state) /* This violates the spec but is required for bug compatibility. */ acpi_write_bit_register(ACPI_BITREG_SCI_ENABLE, 1); - /* Reprogram control registers and execute _BFS */ - acpi_leave_sleep_state_prep(acpi_state, wake_sleep_flags); + /* Reprogram control registers */ + acpi_leave_sleep_state_prep(acpi_state); /* ACPI 3.0 specs (P62) says that it's the responsibility * of the OSPM to clear the status bit [ implying that the @@ -603,9 +575,9 @@ static int acpi_hibernation_enter(void) ACPI_FLUSH_CPU_CACHE(); /* This shouldn't return. If it returns, we have a problem */ - status = acpi_enter_sleep_state(ACPI_STATE_S4, wake_sleep_flags); - /* Reprogram control registers and execute _BFS */ - acpi_leave_sleep_state_prep(ACPI_STATE_S4, wake_sleep_flags); + status = acpi_enter_sleep_state(ACPI_STATE_S4); + /* Reprogram control registers */ + acpi_leave_sleep_state_prep(ACPI_STATE_S4); return ACPI_SUCCESS(status) ? 0 : -EFAULT; } @@ -617,8 +589,8 @@ static void acpi_hibernation_leave(void) * enable it here. */ acpi_enable(); - /* Reprogram control registers and execute _BFS */ - acpi_leave_sleep_state_prep(ACPI_STATE_S4, wake_sleep_flags); + /* Reprogram control registers */ + acpi_leave_sleep_state_prep(ACPI_STATE_S4); /* Check the hardware signature */ if (facs && s4_hardware_signature != facs->hardware_signature) { printk(KERN_EMERG "ACPI: Hardware changed while hibernated, " @@ -716,8 +688,9 @@ int acpi_suspend(u32 acpi_state) * @dev: device to examine; its driver model wakeup flags control * whether it should be able to wake up the system * @d_min_p: used to store the upper limit of allowed states range - * Return value: preferred power state of the device on success, -ENODEV on - * failure (ie. if there's no 'struct acpi_device' for @dev) + * @d_max_in: specify the lowest allowed states + * Return value: preferred power state of the device on success, -ENODEV + * (ie. if there's no 'struct acpi_device' for @dev) or -EINVAL on failure * * Find the lowest power (highest number) ACPI device power state that * device @dev can be in while the system is in the sleep state represented @@ -732,13 +705,15 @@ int acpi_suspend(u32 acpi_state) * via @wake. */ -int acpi_pm_device_sleep_state(struct device *dev, int *d_min_p) +int acpi_pm_device_sleep_state(struct device *dev, int *d_min_p, int d_max_in) { acpi_handle handle = DEVICE_ACPI_HANDLE(dev); struct acpi_device *adev; char acpi_method[] = "_SxD"; unsigned long long d_min, d_max; + if (d_max_in < ACPI_STATE_D0 || d_max_in > ACPI_STATE_D3) + return -EINVAL; if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) { printk(KERN_DEBUG "ACPI handle has no context!\n"); return -ENODEV; @@ -746,8 +721,10 @@ int acpi_pm_device_sleep_state(struct device *dev, int *d_min_p) acpi_method[2] = '0' + acpi_target_sleep_state; /* - * If the sleep state is S0, we will return D3, but if the device has - * _S0W, we will use the value from _S0W + * If the sleep state is S0, the lowest limit from ACPI is D3, + * but if the device has _S0W, we will use the value from _S0W + * as the lowest limit from ACPI. Finally, we will constrain + * the lowest limit with the specified one. */ d_min = ACPI_STATE_D0; d_max = ACPI_STATE_D3; @@ -791,10 +768,20 @@ int acpi_pm_device_sleep_state(struct device *dev, int *d_min_p) } } + if (d_max_in < d_min) + return -EINVAL; if (d_min_p) *d_min_p = d_min; + /* constrain d_max with specified lowest limit (max number) */ + if (d_max > d_max_in) { + for (d_max = d_max_in; d_max > d_min; d_max--) { + if (adev->power.states[d_max].flags.valid) + break; + } + } return d_max; } +EXPORT_SYMBOL(acpi_pm_device_sleep_state); #endif /* CONFIG_PM */ #ifdef CONFIG_PM_SLEEP @@ -831,6 +818,7 @@ int acpi_pm_device_run_wake(struct device *phys_dev, bool enable) return 0; } +EXPORT_SYMBOL(acpi_pm_device_run_wake); /** * acpi_pm_device_sleep_wake - enable or disable the system wake-up @@ -876,33 +864,7 @@ static void acpi_power_off(void) /* acpi_sleep_prepare(ACPI_STATE_S5) should have already been called */ printk(KERN_DEBUG "%s called\n", __func__); local_irq_disable(); - acpi_enter_sleep_state(ACPI_STATE_S5, wake_sleep_flags); -} - -/* - * ACPI 2.0 created the optional _GTS and _BFS, - * but industry adoption has been neither rapid nor broad. - * - * Linux gets into trouble when it executes poorly validated - * paths through the BIOS, so disable _GTS and _BFS by default, - * but do speak up and offer the option to enable them. - */ -static void __init acpi_gts_bfs_check(void) -{ - acpi_handle dummy; - - if (ACPI_SUCCESS(acpi_get_handle(ACPI_ROOT_OBJECT, METHOD_PATHNAME__GTS, &dummy))) - { - printk(KERN_NOTICE PREFIX "BIOS offers _GTS\n"); - printk(KERN_NOTICE PREFIX "If \"acpi.gts=1\" improves suspend, " - "please notify linux-acpi@vger.kernel.org\n"); - } - if (ACPI_SUCCESS(acpi_get_handle(ACPI_ROOT_OBJECT, METHOD_PATHNAME__BFS, &dummy))) - { - printk(KERN_NOTICE PREFIX "BIOS offers _BFS\n"); - printk(KERN_NOTICE PREFIX "If \"acpi.bfs=1\" improves resume, " - "please notify linux-acpi@vger.kernel.org\n"); - } + acpi_enter_sleep_state(ACPI_STATE_S5); } int __init acpi_sleep_init(void) @@ -963,6 +925,5 @@ int __init acpi_sleep_init(void) * object can also be evaluated when the system enters S5. */ register_reboot_notifier(&tts_notifier); - acpi_gts_bfs_check(); return 0; } |