6 files changed, 262 insertions, 190 deletions

diff --git a/drivers/acpi/sleep/Makefile b/drivers/acpi/sleep/Makefile
index d6c017709c8..f1fb888c2d2 100644
--- a/drivers/acpi/sleep/Makefile
+++ b/drivers/acpi/sleep/Makefile
@@ -1,5 +1,5 @@
-obj-y					:= poweroff.o wakeup.o
-obj-$(CONFIG_ACPI_SLEEP)		+= main.o
-obj-$(CONFIG_ACPI_SLEEP_PROC_FS)	+= proc.o
+obj-y					:= wakeup.o
+obj-y					+= main.o
+obj-$(CONFIG_ACPI_SLEEP)		+= proc.o
 
 EXTRA_CFLAGS += $(ACPI_CFLAGS)
diff --git a/drivers/acpi/sleep/main.c b/drivers/acpi/sleep/main.c
index bc7e16ec839..5055acf2163 100644
--- a/drivers/acpi/sleep/main.c
+++ b/drivers/acpi/sleep/main.c
@@ -15,12 +15,41 @@
 #include <linux/dmi.h>
 #include <linux/device.h>
 #include <linux/suspend.h>
+
+#include <asm/io.h>
+
 #include <acpi/acpi_bus.h>
 #include <acpi/acpi_drivers.h>
 #include "sleep.h"
 
 u8 sleep_states[ACPI_S_STATE_COUNT];
 
+#ifdef CONFIG_PM_SLEEP
+static u32 acpi_target_sleep_state = ACPI_STATE_S0;
+#endif
+
+int acpi_sleep_prepare(u32 acpi_state)
+{
+#ifdef CONFIG_ACPI_SLEEP
+	/* do we have a wakeup address for S2 and S3? */
+	if (acpi_state == ACPI_STATE_S3) {
+		if (!acpi_wakeup_address) {
+			return -EFAULT;
+		}
+		acpi_set_firmware_waking_vector((acpi_physical_address)
+						virt_to_phys((void *)
+							     acpi_wakeup_address));
+
+	}
+	ACPI_FLUSH_CPU_CACHE();
+	acpi_enable_wakeup_device_prep(acpi_state);
+#endif
+	acpi_gpe_sleep_prepare(acpi_state);
+	acpi_enter_sleep_state_prep(acpi_state);
+	return 0;
+}
+
+#ifdef CONFIG_SUSPEND
 static struct pm_ops acpi_pm_ops;
 
 extern void do_suspend_lowlevel(void);
@@ -35,34 +64,49 @@ static u32 acpi_suspend_states[] = {
 static int init_8259A_after_S1;
 
 /**
+ *	acpi_pm_set_target - Set the target system sleep state to the state
+ *		associated with given @pm_state, if supported.
+ */
+
+static int acpi_pm_set_target(suspend_state_t pm_state)
+{
+	u32 acpi_state = acpi_suspend_states[pm_state];
+	int error = 0;
+
+	if (sleep_states[acpi_state]) {
+		acpi_target_sleep_state = acpi_state;
+	} else {
+		printk(KERN_ERR "ACPI does not support this state: %d\n",
+			pm_state);
+		error = -ENOSYS;
+	}
+	return error;
+}
+
+/**
  *	acpi_pm_prepare - Do preliminary suspend work.
- *	@pm_state:		suspend state we're entering.
+ *	@pm_state: ignored
  *
- *	Make sure we support the state. If we do, and we need it, set the
- *	firmware waking vector and do arch-specific nastiness to get the 
- *	wakeup code to the waking vector. 
+ *	If necessary, set the firmware waking vector and do arch-specific
+ *	nastiness to get the wakeup code to the waking vector.
  */
 
-extern int acpi_sleep_prepare(u32 acpi_state);
-extern void acpi_power_off(void);
-
 static int acpi_pm_prepare(suspend_state_t pm_state)
 {
-	u32 acpi_state = acpi_suspend_states[pm_state];
+	int error = acpi_sleep_prepare(acpi_target_sleep_state);
 
-	if (!sleep_states[acpi_state]) {
-		printk("acpi_pm_prepare does not support %d \n", pm_state);
-		return -EPERM;
-	}
-	return acpi_sleep_prepare(acpi_state);
+	if (error)
+		acpi_target_sleep_state = ACPI_STATE_S0;
+
+	return error;
 }
 
 /**
  *	acpi_pm_enter - Actually enter a sleep state.
- *	@pm_state:		State we're entering.
+ *	@pm_state: ignored
  *
- *	Flush caches and go to sleep. For STR or STD, we have to call 
- *	arch-specific assembly, which in turn call acpi_enter_sleep_state().
+ *	Flush caches and go to sleep. For STR we have to call arch-specific
+ *	assembly, which in turn call acpi_enter_sleep_state().
  *	It's unfortunate, but it works. Please fix if you're feeling frisky.
  */
 
@@ -70,31 +114,31 @@ static int acpi_pm_enter(suspend_state_t pm_state)
 {
 	acpi_status status = AE_OK;
 	unsigned long flags = 0;
-	u32 acpi_state = acpi_suspend_states[pm_state];
+	u32 acpi_state = acpi_target_sleep_state;
 
 	ACPI_FLUSH_CPU_CACHE();
 
 	/* Do arch specific saving of state. */
-	if (pm_state > PM_SUSPEND_STANDBY) {
+	if (acpi_state == ACPI_STATE_S3) {
 		int error = acpi_save_state_mem();
-		if (error)
+
+		if (error) {
+			acpi_target_sleep_state = ACPI_STATE_S0;
 			return error;
+		}
 	}
 
 	local_irq_save(flags);
 	acpi_enable_wakeup_device(acpi_state);
-	switch (pm_state) {
-	case PM_SUSPEND_STANDBY:
+	switch (acpi_state) {
+	case ACPI_STATE_S1:
 		barrier();
 		status = acpi_enter_sleep_state(acpi_state);
 		break;
 
-	case PM_SUSPEND_MEM:
+	case ACPI_STATE_S3:
 		do_suspend_lowlevel();
 		break;
-
-	default:
-		return -EINVAL;
 	}
 
 	/* ACPI 3.0 specs (P62) says that it's the responsabilty
@@ -107,12 +151,8 @@ static int acpi_pm_enter(suspend_state_t pm_state)
 	local_irq_restore(flags);
 	printk(KERN_DEBUG "Back to C!\n");
 
-	/* restore processor state
-	 * We should only be here if we're coming back from STR or STD.
-	 * And, in the case of the latter, the memory image should have already
-	 * been loaded from disk.
-	 */
-	if (pm_state > PM_SUSPEND_STANDBY)
+	/* restore processor state */
+	if (acpi_state == ACPI_STATE_S3)
 		acpi_restore_state_mem();
 
 	return ACPI_SUCCESS(status) ? 0 : -EFAULT;
@@ -120,7 +160,7 @@ static int acpi_pm_enter(suspend_state_t pm_state)
 
 /**
  *	acpi_pm_finish - Finish up suspend sequence.
- *	@pm_state:		State we're coming out of.
+ *	@pm_state: ignored
  *
  *	This is called after we wake back up (or if entering the sleep state
  *	failed). 
@@ -128,7 +168,7 @@ static int acpi_pm_enter(suspend_state_t pm_state)
 
 static int acpi_pm_finish(suspend_state_t pm_state)
 {
-	u32 acpi_state = acpi_suspend_states[pm_state];
+	u32 acpi_state = acpi_target_sleep_state;
 
 	acpi_leave_sleep_state(acpi_state);
 	acpi_disable_wakeup_device(acpi_state);
@@ -136,28 +176,17 @@ static int acpi_pm_finish(suspend_state_t pm_state)
 	/* reset firmware waking vector */
 	acpi_set_firmware_waking_vector((acpi_physical_address) 0);
 
+	acpi_target_sleep_state = ACPI_STATE_S0;
+
+#ifdef CONFIG_X86
 	if (init_8259A_after_S1) {
 		printk("Broken toshiba laptop -> kicking interrupts\n");
 		init_8259A(0);
 	}
+#endif
 	return 0;
 }
 
-int acpi_suspend(u32 acpi_state)
-{
-	suspend_state_t states[] = {
-		[1] = PM_SUSPEND_STANDBY,
-		[3] = PM_SUSPEND_MEM,
-		[5] = PM_SUSPEND_MAX
-	};
-
-	if (acpi_state < 6 && states[acpi_state])
-		return pm_suspend(states[acpi_state]);
-	if (acpi_state == 4)
-		return hibernate();
-	return -EINVAL;
-}
-
 static int acpi_pm_state_valid(suspend_state_t pm_state)
 {
 	u32 acpi_state;
@@ -176,12 +205,34 @@ static int acpi_pm_state_valid(suspend_state_t pm_state)
 
 static struct pm_ops acpi_pm_ops = {
 	.valid = acpi_pm_state_valid,
+	.set_target = acpi_pm_set_target,
 	.prepare = acpi_pm_prepare,
 	.enter = acpi_pm_enter,
 	.finish = acpi_pm_finish,
 };
 
-#ifdef CONFIG_SOFTWARE_SUSPEND
+/*
+ * Toshiba fails to preserve interrupts over S1, reinitialization
+ * of 8259 is needed after S1 resume.
+ */
+static int __init init_ints_after_s1(const struct dmi_system_id *d)
+{
+	printk(KERN_WARNING "%s with broken S1 detected.\n", d->ident);
+	init_8259A_after_S1 = 1;
+	return 0;
+}
+
+static struct dmi_system_id __initdata acpisleep_dmi_table[] = {
+	{
+	 .callback = init_ints_after_s1,
+	 .ident = "Toshiba Satellite 4030cdt",
+	 .matches = {DMI_MATCH(DMI_PRODUCT_NAME, "S4030CDT/4.3"),},
+	 },
+	{},
+};
+#endif /* CONFIG_SUSPEND */
+
+#ifdef CONFIG_HIBERNATION
 static int acpi_hibernation_prepare(void)
 {
 	return acpi_sleep_prepare(ACPI_STATE_S4);
@@ -210,69 +261,180 @@ static void acpi_hibernation_finish(void)
 
 	/* reset firmware waking vector */
 	acpi_set_firmware_waking_vector((acpi_physical_address) 0);
+}
 
-	if (init_8259A_after_S1) {
-		printk("Broken toshiba laptop -> kicking interrupts\n");
-		init_8259A(0);
-	}
+static int acpi_hibernation_pre_restore(void)
+{
+	acpi_status status;
+
+	status = acpi_hw_disable_all_gpes();
+
+	return ACPI_SUCCESS(status) ? 0 : -EFAULT;
+}
+
+static void acpi_hibernation_restore_cleanup(void)
+{
+	acpi_hw_enable_all_runtime_gpes();
 }
 
 static struct hibernation_ops acpi_hibernation_ops = {
 	.prepare = acpi_hibernation_prepare,
 	.enter = acpi_hibernation_enter,
 	.finish = acpi_hibernation_finish,
+	.pre_restore = acpi_hibernation_pre_restore,
+	.restore_cleanup = acpi_hibernation_restore_cleanup,
 };
-#endif				/* CONFIG_SOFTWARE_SUSPEND */
+#endif				/* CONFIG_HIBERNATION */
 
-/*
- * Toshiba fails to preserve interrupts over S1, reinitialization
- * of 8259 is needed after S1 resume.
+int acpi_suspend(u32 acpi_state)
+{
+	suspend_state_t states[] = {
+		[1] = PM_SUSPEND_STANDBY,
+		[3] = PM_SUSPEND_MEM,
+		[5] = PM_SUSPEND_MAX
+	};
+
+	if (acpi_state < 6 && states[acpi_state])
+		return pm_suspend(states[acpi_state]);
+	if (acpi_state == 4)
+		return hibernate();
+	return -EINVAL;
+}
+
+#ifdef CONFIG_PM_SLEEP
+/**
+ *	acpi_pm_device_sleep_state - return preferred power state of ACPI device
+ *		in the system sleep state given by %acpi_target_sleep_state
+ *	@dev: device to examine
+ *	@wake: if set, the device should be able to wake up the system
+ *	@d_min_p: used to store the upper limit of allowed states range
+ *	Return value: preferred power state of the device on success, -ENODEV on
+ *		failure (ie. if there's no 'struct acpi_device' for @dev)
+ *
+ *	Find the lowest power (highest number) ACPI device power state that
+ *	device @dev can be in while the system is in the sleep state represented
+ *	by %acpi_target_sleep_state.  If @wake is nonzero, the device should be
+ *	able to wake up the system from this sleep state.  If @d_min_p is set,
+ *	the highest power (lowest number) device power state of @dev allowed
+ *	in this system sleep state is stored at the location pointed to by it.
+ *
+ *	The caller must ensure that @dev is valid before using this function.
+ *	The caller is also responsible for figuring out if the device is
+ *	supposed to be able to wake up the system and passing this information
+ *	via @wake.
  */
-static int __init init_ints_after_s1(struct dmi_system_id *d)
+
+int acpi_pm_device_sleep_state(struct device *dev, int wake, int *d_min_p)
 {
-	printk(KERN_WARNING "%s with broken S1 detected.\n", d->ident);
-	init_8259A_after_S1 = 1;
-	return 0;
+	acpi_handle handle = DEVICE_ACPI_HANDLE(dev);
+	struct acpi_device *adev;
+	char acpi_method[] = "_SxD";
+	unsigned long d_min, d_max;
+
+	if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) {
+		printk(KERN_DEBUG "ACPI handle has no context!\n");
+		return -ENODEV;
+	}
+
+	acpi_method[2] = '0' + acpi_target_sleep_state;
+	/*
+	 * If the sleep state is S0, we will return D3, but if the device has
+	 * _S0W, we will use the value from _S0W
+	 */
+	d_min = ACPI_STATE_D0;
+	d_max = ACPI_STATE_D3;
+
+	/*
+	 * If present, _SxD methods return the minimum D-state (highest power
+	 * state) we can use for the corresponding S-states.  Otherwise, the
+	 * minimum D-state is D0 (ACPI 3.x).
+	 *
+	 * NOTE: We rely on acpi_evaluate_integer() not clobbering the integer
+	 * provided -- that's our fault recovery, we ignore retval.
+	 */
+	if (acpi_target_sleep_state > ACPI_STATE_S0)
+		acpi_evaluate_integer(handle, acpi_method, NULL, &d_min);
+
+	/*
+	 * If _PRW says we can wake up the system from the target sleep state,
+	 * the D-state returned by _SxD is sufficient for that (we assume a
+	 * wakeup-aware driver if wake is set).  Still, if _SxW exists
+	 * (ACPI 3.x), it should return the maximum (lowest power) D-state that
+	 * can wake the system.  _S0W may be valid, too.
+	 */
+	if (acpi_target_sleep_state == ACPI_STATE_S0 ||
+	    (wake && adev->wakeup.state.enabled &&
+	     adev->wakeup.sleep_state <= acpi_target_sleep_state)) {
+		acpi_method[3] = 'W';
+		acpi_evaluate_integer(handle, acpi_method, NULL, &d_max);
+		/* Sanity check */
+		if (d_max < d_min)
+			d_min = d_max;
+	}
+
+	if (d_min_p)
+		*d_min_p = d_min;
+	return d_max;
 }
+#endif
 
-static struct dmi_system_id __initdata acpisleep_dmi_table[] = {
-	{
-	 .callback = init_ints_after_s1,
-	 .ident = "Toshiba Satellite 4030cdt",
-	 .matches = {DMI_MATCH(DMI_PRODUCT_NAME, "S4030CDT/4.3"),},
-	 },
-	{},
-};
+static void acpi_power_off_prepare(void)
+{
+	/* Prepare to power off the system */
+	acpi_sleep_prepare(ACPI_STATE_S5);
+}
+
+static void acpi_power_off(void)
+{
+	/* acpi_sleep_prepare(ACPI_STATE_S5) should have already been called */
+	printk("%s called\n", __FUNCTION__);
+	local_irq_disable();
+	acpi_enter_sleep_state(ACPI_STATE_S5);
+}
 
 int __init acpi_sleep_init(void)
 {
+	acpi_status status;
+	u8 type_a, type_b;
+#ifdef CONFIG_SUSPEND
 	int i = 0;
 
 	dmi_check_system(acpisleep_dmi_table);
+#endif
 
 	if (acpi_disabled)
 		return 0;
 
-	printk(KERN_INFO PREFIX "(supports");
-	for (i = 0; i < ACPI_S_STATE_COUNT; i++) {
-		acpi_status status;
-		u8 type_a, type_b;
+	sleep_states[ACPI_STATE_S0] = 1;
+	printk(KERN_INFO PREFIX "(supports S0");
+
+#ifdef CONFIG_SUSPEND
+	for (i = ACPI_STATE_S1; i < ACPI_STATE_S4; i++) {
 		status = acpi_get_sleep_type_data(i, &type_a, &type_b);
 		if (ACPI_SUCCESS(status)) {
 			sleep_states[i] = 1;
 			printk(" S%d", i);
 		}
 	}
-	printk(")\n");
 
 	pm_set_ops(&acpi_pm_ops);
+#endif
 
-#ifdef CONFIG_SOFTWARE_SUSPEND
-	if (sleep_states[ACPI_STATE_S4])
+#ifdef CONFIG_HIBERNATION
+	status = acpi_get_sleep_type_data(ACPI_STATE_S4, &type_a, &type_b);
+	if (ACPI_SUCCESS(status)) {
 		hibernation_set_ops(&acpi_hibernation_ops);
-#else
-	sleep_states[ACPI_STATE_S4] = 0;
+		sleep_states[ACPI_STATE_S4] = 1;
+		printk(" S4");
+	}
 #endif
-
+	status = acpi_get_sleep_type_data(ACPI_STATE_S5, &type_a, &type_b);
+	if (ACPI_SUCCESS(status)) {
+		sleep_states[ACPI_STATE_S5] = 1;
+		printk(" S5");
+		pm_power_off_prepare = acpi_power_off_prepare;
+		pm_power_off = acpi_power_off;
+	}
+	printk(")\n");
 	return 0;
 }
diff --git a/drivers/acpi/sleep/poweroff.c b/drivers/acpi/sleep/poweroff.c
deleted file mode 100644
index d9801eff648..00000000000
--- a/drivers/acpi/sleep/poweroff.c
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * poweroff.c - ACPI handler for powering off the system.
- *
- * AKA S5, but it is independent of whether or not the kernel supports
- * any other sleep support in the system.
- *
- * Copyright (c) 2005 Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
- *
- * This file is released under the GPLv2.
- */
-
-#include <linux/pm.h>
-#include <linux/init.h>
-#include <acpi/acpi_bus.h>
-#include <linux/sysdev.h>
-#include <asm/io.h>
-#include "sleep.h"
-
-int acpi_sleep_prepare(u32 acpi_state)
-{
-#ifdef CONFIG_ACPI_SLEEP
-	/* do we have a wakeup address for S2 and S3? */
-	if (acpi_state == ACPI_STATE_S3) {
-		if (!acpi_wakeup_address) {
-			return -EFAULT;
-		}
-		acpi_set_firmware_waking_vector((acpi_physical_address)
-						virt_to_phys((void *)
-							     acpi_wakeup_address));
-
-	}
-	ACPI_FLUSH_CPU_CACHE();
-	acpi_enable_wakeup_device_prep(acpi_state);
-#endif
-	acpi_gpe_sleep_prepare(acpi_state);
-	acpi_enter_sleep_state_prep(acpi_state);
-	return 0;
-}
-
-#ifdef CONFIG_PM
-
-void acpi_power_off(void)
-{
-	/* acpi_sleep_prepare(ACPI_STATE_S5) should have already been called */
-	printk("%s called\n", __FUNCTION__);
-	local_irq_disable();
-	/* Some SMP machines only can poweroff in boot CPU */
-	acpi_enter_sleep_state(ACPI_STATE_S5);
-}
-
-static int acpi_shutdown(struct sys_device *x)
-{
-	switch (system_state) {
-	case SYSTEM_POWER_OFF:
-		/* Prepare to power off the system */
-		return acpi_sleep_prepare(ACPI_STATE_S5);
-	case SYSTEM_SUSPEND_DISK:
-		/* Prepare to suspend the system to disk */
-		return acpi_sleep_prepare(ACPI_STATE_S4);
-	default:
-		return 0;
-	}
-}
-
-static struct sysdev_class acpi_sysclass = {
-	set_kset_name("acpi"),
-	.shutdown = acpi_shutdown
-};
-
-static struct sys_device device_acpi = {
-	.id = 0,
-	.cls = &acpi_sysclass,
-};
-
-static int acpi_poweroff_init(void)
-{
-	if (!acpi_disabled) {
-		u8 type_a, type_b;
-		acpi_status status;
-
-		status =
-		    acpi_get_sleep_type_data(ACPI_STATE_S5, &type_a, &type_b);
-		if (ACPI_SUCCESS(status)) {
-			int error;
-			error = sysdev_class_register(&acpi_sysclass);
-			if (!error)
-				error = sysdev_register(&device_acpi);
-			if (!error)
-				pm_power_off = acpi_power_off;
-			return error;
-		}
-	}
-	return 0;
-}
-
-late_initcall(acpi_poweroff_init);
-
-#endif				/* CONFIG_PM */
diff --git a/drivers/acpi/sleep/proc.c b/drivers/acpi/sleep/proc.c
index 61f1822cc35..3839efd5eae 100644
--- a/drivers/acpi/sleep/proc.c
+++ b/drivers/acpi/sleep/proc.c
@@ -14,8 +14,16 @@
 #include "sleep.h"
 
 #define _COMPONENT		ACPI_SYSTEM_COMPONENT
+
+/*
+ * this file provides support for:
+ * /proc/acpi/sleep
+ * /proc/acpi/alarm
+ * /proc/acpi/wakeup
+ */
+
 ACPI_MODULE_NAME("sleep")
-#ifdef	CONFIG_ACPI_SLEEP_PROC_SLEEP
+#ifdef	CONFIG_ACPI_PROCFS
 static int acpi_system_sleep_seq_show(struct seq_file *seq, void *offset)
 {
 	int i;
@@ -58,7 +66,7 @@ acpi_system_write_sleep(struct file *file,
 		goto Done;
 	}
 	state = simple_strtoul(str, NULL, 0);
-#ifdef CONFIG_SOFTWARE_SUSPEND
+#ifdef CONFIG_HIBERNATION
 	if (state == 4) {
 		error = hibernate();
 		goto Done;
@@ -68,9 +76,9 @@ acpi_system_write_sleep(struct file *file,
       Done:
 	return error ? error : count;
 }
-#endif				/* CONFIG_ACPI_SLEEP_PROC_SLEEP */
+#endif				/* CONFIG_ACPI_PROCFS */
 
-#if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE)
+#if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE) || !defined(CONFIG_X86)
 /* use /sys/class/rtc/rtcX/wakealarm instead; it's not ACPI-specific */
 #else
 #define	HAVE_ACPI_LEGACY_ALARM
@@ -463,7 +471,7 @@ static const struct file_operations acpi_system_wakeup_device_fops = {
 	.release = single_release,
 };
 
-#ifdef	CONFIG_ACPI_SLEEP_PROC_SLEEP
+#ifdef	CONFIG_ACPI_PROCFS
 static const struct file_operations acpi_system_sleep_fops = {
 	.open = acpi_system_sleep_open_fs,
 	.read = seq_read,
@@ -471,7 +479,7 @@ static const struct file_operations acpi_system_sleep_fops = {
 	.llseek = seq_lseek,
 	.release = single_release,
 };
-#endif				/* CONFIG_ACPI_SLEEP_PROC_SLEEP */
+#endif				/* CONFIG_ACPI_PROCFS */
 
 #ifdef	HAVE_ACPI_LEGACY_ALARM
 static const struct file_operations acpi_system_alarm_fops = {
@@ -498,14 +506,14 @@ static int __init acpi_sleep_proc_init(void)
 	if (acpi_disabled)
 		return 0;
 
-#ifdef	CONFIG_ACPI_SLEEP_PROC_SLEEP
+#ifdef	CONFIG_ACPI_PROCFS
 	/* 'sleep' [R/W] */
 	entry =
 	    create_proc_entry("sleep", S_IFREG | S_IRUGO | S_IWUSR,
 			      acpi_root_dir);
 	if (entry)
 		entry->proc_fops = &acpi_system_sleep_fops;
-#endif
+#endif				/* CONFIG_ACPI_PROCFS */
 
 #ifdef	HAVE_ACPI_LEGACY_ALARM
 	/* 'alarm' [R/W] */
diff --git a/drivers/acpi/sleep/sleep.h b/drivers/acpi/sleep/sleep.h
index f3e70397a7d..ff1f8504f49 100644
--- a/drivers/acpi/sleep/sleep.h
+++ b/drivers/acpi/sleep/sleep.h
@@ -6,3 +6,5 @@ extern void acpi_enable_wakeup_device_prep(u8 sleep_state);
 extern void acpi_enable_wakeup_device(u8 sleep_state);
 extern void acpi_disable_wakeup_device(u8 sleep_state);
 extern void acpi_gpe_sleep_prepare(u32 sleep_state);
+
+extern int acpi_sleep_prepare(u32 acpi_state);
diff --git a/drivers/acpi/sleep/wakeup.c b/drivers/acpi/sleep/wakeup.c
index fab8f2694f0..97c27ddb144 100644
--- a/drivers/acpi/sleep/wakeup.c
+++ b/drivers/acpi/sleep/wakeup.c
@@ -17,7 +17,6 @@ ACPI_MODULE_NAME("wakeup_devices")
 extern struct list_head acpi_wakeup_device_list;
 extern spinlock_t acpi_device_lock;
 
-#ifdef CONFIG_ACPI_SLEEP
 /**
  * acpi_enable_wakeup_device_prep - prepare wakeup devices
  *	@sleep_state:	ACPI state
@@ -180,7 +179,6 @@ static int __init acpi_wakeup_device_init(void)
 }
 
 late_initcall(acpi_wakeup_device_init);
-#endif
 
 /*
  * Disable all wakeup GPEs before entering requested sleep state.