summaryrefslogtreecommitdiffstats
path: root/drivers/acpi
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/acpi')
-rw-r--r--drivers/acpi/blacklist.c401
-rw-r--r--drivers/acpi/bus.c8
-rw-r--r--drivers/acpi/ec.c3
-rw-r--r--drivers/acpi/osl.c104
-rw-r--r--drivers/acpi/pci_irq.c56
-rw-r--r--drivers/acpi/processor_core.c14
-rw-r--r--drivers/acpi/processor_idle.c7
-rw-r--r--drivers/acpi/processor_perflib.c28
-rw-r--r--drivers/acpi/processor_throttling.c80
-rw-r--r--drivers/acpi/scan.c10
-rw-r--r--drivers/acpi/sleep/main.c40
-rw-r--r--drivers/acpi/toshiba_acpi.c56
-rw-r--r--drivers/acpi/utilities/utglobal.c2
-rw-r--r--drivers/acpi/utils.c16
14 files changed, 243 insertions, 582 deletions
diff --git a/drivers/acpi/blacklist.c b/drivers/acpi/blacklist.c
index ea92bac42c5..09c69806c1f 100644
--- a/drivers/acpi/blacklist.c
+++ b/drivers/acpi/blacklist.c
@@ -176,16 +176,6 @@ static int __init dmi_enable_osi_linux(const struct dmi_system_id *d)
acpi_dmi_osi_linux(1, d); /* enable */
return 0;
}
-static int __init dmi_disable_osi_linux(const struct dmi_system_id *d)
-{
- acpi_dmi_osi_linux(0, d); /* disable */
- return 0;
-}
-static int __init dmi_unknown_osi_linux(const struct dmi_system_id *d)
-{
- acpi_dmi_osi_linux(-1, d); /* unknown */
- return 0;
-}
static int __init dmi_disable_osi_vista(const struct dmi_system_id *d)
{
printk(KERN_NOTICE PREFIX "DMI detected: %s\n", d->ident);
@@ -193,295 +183,21 @@ static int __init dmi_disable_osi_vista(const struct dmi_system_id *d)
return 0;
}
-/*
- * Most BIOS that invoke OSI(Linux) do nothing with it.
- * But some cause Linux to break.
- * Only a couple use it to make Linux run better.
- *
- * Thus, Linux should continue to disable OSI(Linux) by default,
- * should continue to discourage BIOS writers from using it, and
- * should whitelist the few existing systems that require it.
- *
- * If it appears clear a vendor isn't using OSI(Linux)
- * for anything constructive, blacklist them by name to disable
- * unnecessary dmesg warnings on all of their products.
- */
-
static struct dmi_system_id acpi_osi_dmi_table[] __initdata = {
- /*
- * Disable OSI(Linux) warnings on all "Acer, inc."
- *
- * _OSI(Linux) disables the latest Windows BIOS code:
- * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 3100"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5050"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5100"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5580"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 3010"),
- * _OSI(Linux) effect unknown:
- * DMI_MATCH(DMI_PRODUCT_NAME, "Ferrari 5000"),
- */
- /*
- * note that dmi_check_system() uses strstr()
- * to match sub-strings rather than !strcmp(),
- * so "Acer" below matches "Acer, inc." above.
- */
- /*
- * Disable OSI(Linux) warnings on all "Acer"
- *
- * _OSI(Linux) effect unknown:
- * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5610"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 7720Z"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 5520"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 6460"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 7510"),
- *
- * _OSI(Linux) is a NOP:
- * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5315"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Extensa 5220"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Acer",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
- },
- },
- /*
- * Disable OSI(Linux) warnings on all "Apple Computer, Inc."
- * Disable OSI(Linux) warnings on all "Apple Inc."
- *
- * _OSI(Linux) confirmed to be a NOP:
- * DMI_MATCH(DMI_PRODUCT_NAME, "MacBook1,1"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "MacBook2,1"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro2,2"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro3,1"),
- * _OSI(Linux) effect unknown:
- * DMI_MATCH(DMI_PRODUCT_NAME, "MacPro2,1"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro1,1"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Apple",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Apple"),
- },
- },
- /*
- * Disable OSI(Linux) warnings on all "BenQ"
- *
- * _OSI(Linux) confirmed to be a NOP:
- * DMI_MATCH(DMI_PRODUCT_NAME, "Joybook S31"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "BenQ",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "BenQ"),
- },
- },
- /*
- * Disable OSI(Linux) warnings on all "Clevo Co."
- *
- * _OSI(Linux) confirmed to be a NOP:
- * DMI_MATCH(DMI_PRODUCT_NAME, "M570RU"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Clevo",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Clevo Co."),
- },
- },
- /*
- * Disable OSI(Linux) warnings on all "COMPAL"
- *
- * _OSI(Linux) confirmed to be a NOP:
- * DMI_MATCH(DMI_BOARD_NAME, "HEL8X"),
- * _OSI(Linux) unknown effect:
- * DMI_MATCH(DMI_BOARD_NAME, "IFL91"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Compal",
- .matches = {
- DMI_MATCH(DMI_BIOS_VENDOR, "COMPAL"),
- },
- },
- { /* OSI(Linux) touches USB, unknown side-effect */
- .callback = dmi_disable_osi_linux,
- .ident = "Dell Dimension 5150",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "Dell DM051"),
- },
- },
- { /* OSI(Linux) is a NOP */
- .callback = dmi_disable_osi_linux,
- .ident = "Dell i1501",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1501"),
- },
- },
- { /* OSI(Linux) effect unknown */
- .callback = dmi_unknown_osi_linux,
- .ident = "Dell Latitude D830",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "Latitude D830"),
- },
- },
- { /* OSI(Linux) effect unknown */
- .callback = dmi_unknown_osi_linux,
- .ident = "Dell OptiPlex GX620",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex GX620"),
- },
- },
- { /* OSI(Linux) causes some USB initialization to not run */
- .callback = dmi_unknown_osi_linux,
- .ident = "Dell OptiPlex 755",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 755"),
- },
- },
- { /* OSI(Linux) effect unknown */
- .callback = dmi_unknown_osi_linux,
- .ident = "Dell PE 1900",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1900"),
- },
- },
- { /* OSI(Linux) is a NOP */
- .callback = dmi_unknown_osi_linux,
- .ident = "Dell PE 1950",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1950"),
- },
- },
- { /* OSI(Linux) is a NOP */
- .callback = dmi_disable_osi_linux,
- .ident = "Dell PE R200",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge R200"),
- },
- },
- { /* OSI(Linux) touches USB */
- .callback = dmi_disable_osi_linux,
- .ident = "Dell PR 390",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "Precision WorkStation 390"),
- },
- },
- { /* OSI(Linux) touches USB */
- .callback = dmi_unknown_osi_linux,
- .ident = "Dell PR 390",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "Precision WorkStation 690"),
- },
- },
- { /* OSI(Linux) unknown - ASL looks benign, but may effect dock/SMM */
- .callback = dmi_unknown_osi_linux,
- .ident = "Dell PR M4300",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "Precision M4300"),
- },
- },
- { /* OSI(Linux) is a NOP */
- .callback = dmi_disable_osi_linux,
- .ident = "Dell Vostro 1000",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "Vostro 1000"),
- },
- },
- { /* OSI(Linux) effect unknown */
- .callback = dmi_unknown_osi_linux,
- .ident = "Dell PE SC440",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge SC440"),
- },
- },
- { /* OSI(Linux) effect unknown */
- .callback = dmi_unknown_osi_linux,
- .ident = "Dialogue Flybook V5",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dialogue Technology Corporation"),
- DMI_MATCH(DMI_PRODUCT_NAME, "Flybook V5"),
- },
- },
- /*
- * Disable OSI(Linux) warnings on all "FUJITSU SIEMENS"
- *
- * _OSI(Linux) disables latest Windows BIOS code:
- * DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pa 2510"),
- * _OSI(Linux) confirmed to be a NOP:
- * DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pi 1536"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pi 1556"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Xi 1546"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "ESPRIMO Mobile V5505"),
- * _OSI(Linux) unknown effect:
- * DMI_MATCH(DMI_PRODUCT_NAME, "Amilo M1425"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Amilo Si 1520"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Fujitsu Siemens",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
- },
- },
{
.callback = dmi_disable_osi_vista,
.ident = "Fujitsu Siemens",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
- DMI_MATCH(DMI_PRODUCT_NAME, "ESPRIMO Mobile V5505"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "ESPRIMO Mobile V5505"),
},
},
+
/*
- * Disable OSI(Linux) warnings on all "Hewlett-Packard"
- *
- * _OSI(Linux) confirmed to be a NOP:
- * .ident = "HP Pavilion tx 1000"
- * DMI_MATCH(DMI_BOARD_NAME, "30BF"),
- * .ident = "HP Pavilion dv2000"
- * DMI_MATCH(DMI_BOARD_NAME, "30B5"),
- * .ident = "HP Pavilion dv5000",
- * DMI_MATCH(DMI_BOARD_NAME, "30A7"),
- * .ident = "HP Pavilion dv6300 30BC",
- * DMI_MATCH(DMI_BOARD_NAME, "30BC"),
- * .ident = "HP Pavilion dv6000",
- * DMI_MATCH(DMI_BOARD_NAME, "30B7"),
- * DMI_MATCH(DMI_BOARD_NAME, "30B8"),
- * .ident = "HP Pavilion dv9000",
- * DMI_MATCH(DMI_BOARD_NAME, "30B9"),
- * .ident = "HP Pavilion dv9500",
- * DMI_MATCH(DMI_BOARD_NAME, "30CB"),
- * .ident = "HP/Compaq Presario C500",
- * DMI_MATCH(DMI_BOARD_NAME, "30C6"),
- * .ident = "HP/Compaq Presario F500",
- * DMI_MATCH(DMI_BOARD_NAME, "30D3"),
- * _OSI(Linux) unknown effect:
- * .ident = "HP Pavilion dv6500",
- * DMI_MATCH(DMI_BOARD_NAME, "30D0"),
+ * BIOS invocation of _OSI(Linux) is almost always a BIOS bug.
+ * Linux ignores it, except for the machines enumerated below.
*/
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Hewlett-Packard",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
- },
- },
+
/*
* Lenovo has a mix of systems OSI(Linux) situations
* and thus we can not wildcard the vendor.
@@ -519,113 +235,6 @@ static struct dmi_system_id acpi_osi_dmi_table[] __initdata = {
DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X61"),
},
},
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Lenovo 3000 V100",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
- DMI_MATCH(DMI_PRODUCT_VERSION, "LENOVO3000 V100"),
- },
- },
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Lenovo 3000 N100",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
- DMI_MATCH(DMI_PRODUCT_VERSION, "3000 N100"),
- },
- },
- /*
- * Disable OSI(Linux) warnings on all "LG Electronics"
- *
- * _OSI(Linux) confirmed to be a NOP:
- * DMI_MATCH(DMI_PRODUCT_NAME, "P1-J150B"),
- * with DMI_MATCH(DMI_BOARD_NAME, "ROCKY"),
- *
- * unknown:
- * DMI_MATCH(DMI_PRODUCT_NAME, "S1-MDGDG"),
- * with DMI_MATCH(DMI_BOARD_NAME, "ROCKY"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "LG",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "LG Electronics"),
- },
- },
- /* NEC - OSI(Linux) effect unknown */
- {
- .callback = dmi_unknown_osi_linux,
- .ident = "NEC VERSA M360",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "NEC Computers SAS"),
- DMI_MATCH(DMI_PRODUCT_NAME, "NEC VERSA M360"),
- },
- },
- /* Panasonic */
- {
- .callback = dmi_unknown_osi_linux,
- .ident = "Panasonic",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Matsushita"),
- /* Toughbook CF-52 */
- DMI_MATCH(DMI_PRODUCT_NAME, "CF-52CCABVBG"),
- },
- },
- /*
- * Disable OSI(Linux) warnings on all "Samsung Electronics"
- *
- * OSI(Linux) disables PNP0C32 and other BIOS code for Windows:
- * DMI_MATCH(DMI_PRODUCT_NAME, "R40P/R41P"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "R59P/R60P/R61P"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Samsung",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
- },
- },
- /*
- * Disable OSI(Linux) warnings on all "Sony Corporation"
- *
- * _OSI(Linux) is a NOP:
- * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-NR11S_S"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SZ38GP_C"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SZ650N"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-TZ21MN_N"),
- * _OSI(Linux) unknown effect:
- * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FZ11M"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Sony",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
- },
- },
- /*
- * Disable OSI(Linux) warnings on all "TOSHIBA"
- *
- * _OSI(Linux) breaks sound (bugzilla 7787):
- * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P100"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P105"),
- * _OSI(Linux) is a NOP:
- * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite A100"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite A210"),
- * _OSI(Linux) unknown effect:
- * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite A135"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite A200"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P205"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite U305"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Toshiba",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
- },
- },
{}
};
diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index 7edf6d913c1..765fd1c56cd 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -688,14 +688,6 @@ void __init acpi_early_init(void)
if (acpi_disabled)
return;
- /*
- * ACPI CA initializes acpi_dbg_level to non-zero, which means
- * we get debug output merely by turning on CONFIG_ACPI_DEBUG.
- * Turn it off so we don't get output unless the user specifies
- * acpi.debug_level.
- */
- acpi_dbg_level = 0;
-
printk(KERN_INFO PREFIX "Core revision %08x\n", ACPI_CA_VERSION);
/* enable workarounds, unless strict ACPI spec. compliance */
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index cf41f9fc24a..30f3ef236ec 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -219,7 +219,8 @@ static void gpe_transaction(struct acpi_ec *ec, u8 status)
goto unlock;
err:
/* false interrupt, state didn't change */
- ++ec->curr->irq_count;
+ if (in_interrupt())
+ ++ec->curr->irq_count;
unlock:
spin_unlock_irqrestore(&ec->curr_lock, flags);
}
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index 4be252145cb..c8111424dcb 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -35,7 +35,6 @@
#include <linux/interrupt.h>
#include <linux/kmod.h>
#include <linux/delay.h>
-#include <linux/dmi.h>
#include <linux/workqueue.h>
#include <linux/nmi.h>
#include <linux/acpi.h>
@@ -97,54 +96,44 @@ static DEFINE_SPINLOCK(acpi_res_lock);
static char osi_additional_string[OSI_STRING_LENGTH_MAX];
/*
- * "Ode to _OSI(Linux)"
+ * The story of _OSI(Linux)
*
- * osi_linux -- Control response to BIOS _OSI(Linux) query.
+ * From pre-history through Linux-2.6.22,
+ * Linux responded TRUE upon a BIOS OSI(Linux) query.
*
- * As Linux evolves, the features that it supports change.
- * So an OSI string such as "Linux" is not specific enough
- * to be useful across multiple versions of Linux. It
- * doesn't identify any particular feature, interface,
- * or even any particular version of Linux...
+ * Unfortunately, reference BIOS writers got wind of this
+ * and put OSI(Linux) in their example code, quickly exposing
+ * this string as ill-conceived and opening the door to
+ * an un-bounded number of BIOS incompatibilities.
*
- * Unfortunately, Linux-2.6.22 and earlier responded "yes"
- * to a BIOS _OSI(Linux) query. When
- * a reference mobile BIOS started using it, its use
- * started to spread to many vendor platforms.
- * As it is not supportable, we need to halt that spread.
+ * For example, OSI(Linux) was used on resume to re-POST a
+ * video card on one system, because Linux at that time
+ * could not do a speedy restore in its native driver.
+ * But then upon gaining quick native restore capability,
+ * Linux has no way to tell the BIOS to skip the time-consuming
+ * POST -- putting Linux at a permanent performance disadvantage.
+ * On another system, the BIOS writer used OSI(Linux)
+ * to infer native OS support for IPMI! On other systems,
+ * OSI(Linux) simply got in the way of Linux claiming to
+ * be compatible with other operating systems, exposing
+ * BIOS issues such as skipped device initialization.
*
- * Today, most BIOS references to _OSI(Linux) are noise --
- * they have no functional effect and are just dead code
- * carried over from the reference BIOS.
- *
- * The next most common case is that _OSI(Linux) harms Linux,
- * usually by causing the BIOS to follow paths that are
- * not tested during Windows validation.
- *
- * Finally, there is a short list of platforms
- * where OSI(Linux) benefits Linux.
- *
- * In Linux-2.6.23, OSI(Linux) is first disabled by default.
- * DMI is used to disable the dmesg warning about OSI(Linux)
- * on platforms where it is known to have no effect.
- * But a dmesg warning remains for systems where
- * we do not know if OSI(Linux) is good or bad for the system.
- * DMI is also used to enable OSI(Linux) for the machines
- * that are known to need it.
+ * So "Linux" turned out to be a really poor chose of
+ * OSI string, and from Linux-2.6.23 onward we respond FALSE.
*
* BIOS writers should NOT query _OSI(Linux) on future systems.
- * It will be ignored by default, and to get Linux to
- * not ignore it will require a kernel source update to
- * add a DMI entry, or a boot-time "acpi_osi=Linux" invocation.
+ * Linux will complain on the console when it sees it, and return FALSE.
+ * To get Linux to return TRUE for your system will require
+ * a kernel source update to add a DMI entry,
+ * or boot with "acpi_osi=Linux"
*/
-#define OSI_LINUX_ENABLE 0
static struct osi_linux {
unsigned int enable:1;
unsigned int dmi:1;
unsigned int cmdline:1;
unsigned int known:1;
-} osi_linux = { OSI_LINUX_ENABLE, 0, 0, 0};
+} osi_linux = { 0, 0, 0, 0};
static void __init acpi_request_region (struct acpi_generic_address *addr,
unsigned int length, char *desc)
@@ -1296,34 +1285,6 @@ acpi_status acpi_os_release_object(acpi_cache_t * cache, void *object)
return (AE_OK);
}
-/**
- * acpi_dmi_dump - dump DMI slots needed for blacklist entry
- *
- * Returns 0 on success
- */
-static int acpi_dmi_dump(void)
-{
-
- if (!dmi_available)
- return -1;
-
- printk(KERN_NOTICE PREFIX "DMI System Vendor: %s\n",
- dmi_get_system_info(DMI_SYS_VENDOR));
- printk(KERN_NOTICE PREFIX "DMI Product Name: %s\n",
- dmi_get_system_info(DMI_PRODUCT_NAME));
- printk(KERN_NOTICE PREFIX "DMI Product Version: %s\n",
- dmi_get_system_info(DMI_PRODUCT_VERSION));
- printk(KERN_NOTICE PREFIX "DMI Board Name: %s\n",
- dmi_get_system_info(DMI_BOARD_NAME));
- printk(KERN_NOTICE PREFIX "DMI BIOS Vendor: %s\n",
- dmi_get_system_info(DMI_BIOS_VENDOR));
- printk(KERN_NOTICE PREFIX "DMI BIOS Date: %s\n",
- dmi_get_system_info(DMI_BIOS_DATE));
-
- return 0;
-}
-
-
/******************************************************************************
*
* FUNCTION: acpi_os_validate_interface
@@ -1350,21 +1311,6 @@ acpi_os_validate_interface (char *interface)
osi_linux.cmdline ? " via cmdline" :
osi_linux.dmi ? " via DMI" : "");
- if (!osi_linux.dmi) {
- if (acpi_dmi_dump())
- printk(KERN_NOTICE PREFIX
- "[please extract dmidecode output]\n");
- printk(KERN_NOTICE PREFIX
- "Please send DMI info above to "
- "linux-acpi@vger.kernel.org\n");
- }
- if (!osi_linux.known && !osi_linux.cmdline) {
- printk(KERN_NOTICE PREFIX
- "If \"acpi_osi=%sLinux\" works better, "
- "please notify linux-acpi@vger.kernel.org\n",
- osi_linux.enable ? "!" : "");
- }
-
if (osi_linux.enable)
return AE_OK;
}
diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c
index 11acaee14d6..bf79d83bdfb 100644
--- a/drivers/acpi/pci_irq.c
+++ b/drivers/acpi/pci_irq.c
@@ -384,6 +384,27 @@ acpi_pci_free_irq(struct acpi_prt_entry *entry,
return irq;
}
+#ifdef CONFIG_X86_IO_APIC
+extern int noioapicquirk;
+
+static int bridge_has_boot_interrupt_variant(struct pci_bus *bus)
+{
+ struct pci_bus *bus_it;
+
+ for (bus_it = bus ; bus_it ; bus_it = bus_it->parent) {
+ if (!bus_it->self)
+ return 0;
+
+ printk(KERN_INFO "vendor=%04x device=%04x\n", bus_it->self->vendor,
+ bus_it->self->device);
+
+ if (bus_it->self->irq_reroute_variant)
+ return bus_it->self->irq_reroute_variant;
+ }
+ return 0;
+}
+#endif /* CONFIG_X86_IO_APIC */
+
/*
* acpi_pci_irq_lookup
* success: return IRQ >= 0
@@ -413,6 +434,41 @@ acpi_pci_irq_lookup(struct pci_bus *bus,
}
ret = func(entry, triggering, polarity, link);
+
+#ifdef CONFIG_X86_IO_APIC
+ /*
+ * Some chipsets (e.g. intel 6700PXH) generate a legacy INTx when the
+ * IRQ entry in the chipset's IO-APIC is masked (as, e.g. the RT kernel
+ * does during interrupt handling). When this INTx generation cannot be
+ * disabled, we reroute these interrupts to their legacy equivalent to
+ * get rid of spurious interrupts.
+ */
+ if (!noioapicquirk) {
+ switch (bridge_has_boot_interrupt_variant(bus)) {
+ case 0:
+ /* no rerouting necessary */
+ break;
+
+ case INTEL_IRQ_REROUTE_VARIANT:
+ /*
+ * Remap according to INTx routing table in 6700PXH
+ * specs, intel order number 302628-002, section
+ * 2.15.2. Other chipsets (80332, ...) have the same
+ * mapping and are handled here as well.
+ */
+ printk(KERN_INFO "pci irq %d -> rerouted to legacy "
+ "irq %d\n", ret, (ret % 4) + 16);
+ ret = (ret % 4) + 16;
+ break;
+
+ default:
+ printk(KERN_INFO "not rerouting irq %d to legacy irq: "
+ "unknown mapping\n", ret);
+ break;
+ }
+ }
+#endif /* CONFIG_X86_IO_APIC */
+
return ret;
}
diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c
index 34948362f41..0cc2fd31e37 100644
--- a/drivers/acpi/processor_core.c
+++ b/drivers/acpi/processor_core.c
@@ -826,6 +826,11 @@ static int acpi_processor_add(struct acpi_device *device)
if (!pr)
return -ENOMEM;
+ if (!alloc_cpumask_var(&pr->throttling.shared_cpu_map, GFP_KERNEL)) {
+ kfree(pr);
+ return -ENOMEM;
+ }
+
pr->handle = device->handle;
strcpy(acpi_device_name(device), ACPI_PROCESSOR_DEVICE_NAME);
strcpy(acpi_device_class(device), ACPI_PROCESSOR_CLASS);
@@ -845,10 +850,8 @@ static int acpi_processor_remove(struct acpi_device *device, int type)
pr = acpi_driver_data(device);
- if (pr->id >= nr_cpu_ids) {
- kfree(pr);
- return 0;
- }
+ if (pr->id >= nr_cpu_ids)
+ goto free;
if (type == ACPI_BUS_REMOVAL_EJECT) {
if (acpi_processor_handle_eject(pr))
@@ -873,6 +876,9 @@ static int acpi_processor_remove(struct acpi_device *device, int type)
per_cpu(processors, pr->id) = NULL;
per_cpu(processor_device_array, pr->id) = NULL;
+
+free:
+ free_cpumask_var(pr->throttling.shared_cpu_map);
kfree(pr);
return 0;
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index 5f8d746a9b8..66a9d814556 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -41,6 +41,7 @@
#include <linux/pm_qos_params.h>
#include <linux/clockchips.h>
#include <linux/cpuidle.h>
+#include <linux/irqflags.h>
/*
* Include the apic definitions for x86 to have the APIC timer related defines
@@ -374,15 +375,15 @@ static int tsc_halts_in_c(int state)
{
switch (boot_cpu_data.x86_vendor) {
case X86_VENDOR_AMD:
+ case X86_VENDOR_INTEL:
/*
* AMD Fam10h TSC will tick in all
* C/P/S0/S1 states when this bit is set.
*/
- if (boot_cpu_has(X86_FEATURE_CONSTANT_TSC))
+ if (boot_cpu_has(X86_FEATURE_NONSTOP_TSC))
return 0;
+
/*FALL THROUGH*/
- case X86_VENDOR_INTEL:
- /* Several cases known where TSC halts in C2 too */
default:
return state > ACPI_STATE_C1;
}
diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c
index 0d7b772bef5..846e227592d 100644
--- a/drivers/acpi/processor_perflib.c
+++ b/drivers/acpi/processor_perflib.c
@@ -588,12 +588,15 @@ int acpi_processor_preregister_performance(
int count, count_target;
int retval = 0;
unsigned int i, j;
- cpumask_t covered_cpus;
+ cpumask_var_t covered_cpus;
struct acpi_processor *pr;
struct acpi_psd_package *pdomain;
struct acpi_processor *match_pr;
struct acpi_psd_package *match_pdomain;
+ if (!alloc_cpumask_var(&covered_cpus, GFP_KERNEL))
+ return -ENOMEM;
+
mutex_lock(&performance_mutex);
retval = 0;
@@ -617,7 +620,7 @@ int acpi_processor_preregister_performance(
}
pr->performance = percpu_ptr(performance, i);
- cpu_set(i, pr->performance->shared_cpu_map);
+ cpumask_set_cpu(i, pr->performance->shared_cpu_map);
if (acpi_processor_get_psd(pr)) {
retval = -EINVAL;
continue;
@@ -650,18 +653,18 @@ int acpi_processor_preregister_performance(
}
}
- cpus_clear(covered_cpus);
+ cpumask_clear(covered_cpus);
for_each_possible_cpu(i) {
pr = per_cpu(processors, i);
if (!pr)
continue;
- if (cpu_isset(i, covered_cpus))
+ if (cpumask_test_cpu(i, covered_cpus))
continue;
pdomain = &(pr->performance->domain_info);
- cpu_set(i, pr->performance->shared_cpu_map);
- cpu_set(i, covered_cpus);
+ cpumask_set_cpu(i, pr->performance->shared_cpu_map);
+ cpumask_set_cpu(i, covered_cpus);
if (pdomain->num_processors <= 1)
continue;
@@ -699,8 +702,8 @@ int acpi_processor_preregister_performance(
goto err_ret;
}
- cpu_set(j, covered_cpus);
- cpu_set(j, pr->performance->shared_cpu_map);
+ cpumask_set_cpu(j, covered_cpus);
+ cpumask_set_cpu(j, pr->performance->shared_cpu_map);
count++;
}
@@ -718,8 +721,8 @@ int acpi_processor_preregister_performance(
match_pr->performance->shared_type =
pr->performance->shared_type;
- match_pr->performance->shared_cpu_map =
- pr->performance->shared_cpu_map;
+ cpumask_copy(match_pr->performance->shared_cpu_map,
+ pr->performance->shared_cpu_map);
}
}
@@ -731,14 +734,15 @@ err_ret:
/* Assume no coordination on any error parsing domain info */
if (retval) {
- cpus_clear(pr->performance->shared_cpu_map);
- cpu_set(i, pr->performance->shared_cpu_map);
+ cpumask_clear(pr->performance->shared_cpu_map);
+ cpumask_set_cpu(i, pr->performance->shared_cpu_map);
pr->performance->shared_type = CPUFREQ_SHARED_TYPE_ALL;
}
pr->performance = NULL; /* Will be set for real in register */
}
mutex_unlock(&performance_mutex);
+ free_cpumask_var(covered_cpus);
return retval;
}
EXPORT_SYMBOL(acpi_processor_preregister_performance);
diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c
index a0c38c94a8a..d27838171f4 100644
--- a/drivers/acpi/processor_throttling.c
+++ b/drivers/acpi/processor_throttling.c
@@ -61,11 +61,14 @@ static int acpi_processor_update_tsd_coord(void)
int count, count_target;
int retval = 0;
unsigned int i, j;
- cpumask_t covered_cpus;
+ cpumask_var_t covered_cpus;
struct acpi_processor *pr, *match_pr;
struct acpi_tsd_package *pdomain, *match_pdomain;
struct acpi_processor_throttling *pthrottling, *match_pthrottling;
+ if (!alloc_cpumask_var(&covered_cpus, GFP_KERNEL))
+ return -ENOMEM;
+
/*
* Now that we have _TSD data from all CPUs, lets setup T-state
* coordination between all CPUs.
@@ -91,19 +94,19 @@ static int acpi_processor_update_tsd_coord(void)
if (retval)
goto err_ret;
- cpus_clear(covered_cpus);
+ cpumask_clear(covered_cpus);
for_each_possible_cpu(i) {
pr = per_cpu(processors, i);
if (!pr)
continue;
- if (cpu_isset(i, covered_cpus))
+ if (cpumask_test_cpu(i, covered_cpus))
continue;
pthrottling = &pr->throttling;
pdomain = &(pthrottling->domain_info);
- cpu_set(i, pthrottling->shared_cpu_map);
- cpu_set(i, covered_cpus);
+ cpumask_set_cpu(i, pthrottling->shared_cpu_map);
+ cpumask_set_cpu(i, covered_cpus);
/*
* If the number of processor in the TSD domain is 1, it is
* unnecessary to parse the coordination for this CPU.
@@ -144,8 +147,8 @@ static int acpi_processor_update_tsd_coord(void)
goto err_ret;
}
- cpu_set(j, covered_cpus);
- cpu_set(j, pthrottling->shared_cpu_map);
+ cpumask_set_cpu(j, covered_cpus);
+ cpumask_set_cpu(j, pthrottling->shared_cpu_map);
count++;
}
for_each_possible_cpu(j) {
@@ -165,12 +168,14 @@ static int acpi_processor_update_tsd_coord(void)
* If some CPUS have the same domain, they
* will have the same shared_cpu_map.
*/
- match_pthrottling->shared_cpu_map =
- pthrottling->shared_cpu_map;
+ cpumask_copy(match_pthrottling->shared_cpu_map,
+ pthrottling->shared_cpu_map);
}
}
err_ret:
+ free_cpumask_var(covered_cpus);
+
for_each_possible_cpu(i) {
pr = per_cpu(processors, i);
if (!pr)
@@ -182,8 +187,8 @@ err_ret:
*/
if (retval) {
pthrottling = &(pr->throttling);
- cpus_clear(pthrottling->shared_cpu_map);
- cpu_set(i, pthrottling->shared_cpu_map);
+ cpumask_clear(pthrottling->shared_cpu_map);
+ cpumask_set_cpu(i, pthrottling->shared_cpu_map);
pthrottling->shared_type = DOMAIN_COORD_TYPE_SW_ALL;
}
}
@@ -567,7 +572,7 @@ static int acpi_processor_get_tsd(struct acpi_processor *pr)
pthrottling = &pr->throttling;
pthrottling->tsd_valid_flag = 1;
pthrottling->shared_type = pdomain->coord_type;
- cpu_set(pr->id, pthrottling->shared_cpu_map);
+ cpumask_set_cpu(pr->id, pthrottling->shared_cpu_map);
/*
* If the coordination type is not defined in ACPI spec,
* the tsd_valid_flag will be clear and coordination type
@@ -826,7 +831,7 @@ static int acpi_processor_get_throttling_ptc(struct acpi_processor *pr)
static int acpi_processor_get_throttling(struct acpi_processor *pr)
{
- cpumask_t saved_mask;
+ cpumask_var_t saved_mask;
int ret;
if (!pr)
@@ -834,14 +839,20 @@ static int acpi_processor_get_throttling(struct acpi_processor *pr)
if (!pr->flags.throttling)
return -ENODEV;
+
+ if (!alloc_cpumask_var(&saved_mask, GFP_KERNEL))
+ return -ENOMEM;
+
/*
* Migrate task to the cpu pointed by pr.
*/
- saved_mask = current->cpus_allowed;
- set_cpus_allowed_ptr(current, &cpumask_of_cpu(pr->id));
+ cpumask_copy(saved_mask, &current->cpus_allowed);
+ /* FIXME: use work_on_cpu() */
+ set_cpus_allowed_ptr(current, cpumask_of(pr->id));
ret = pr->throttling.acpi_processor_get_throttling(pr);
/* restore the previous state */
- set_cpus_allowed_ptr(current, &saved_mask);
+ set_cpus_allowed_ptr(current, saved_mask);
+ free_cpumask_var(saved_mask);
return ret;
}
@@ -986,13 +997,13 @@ static int acpi_processor_set_throttling_ptc(struct acpi_processor *pr,
int acpi_processor_set_throttling(struct acpi_processor *pr, int state)
{
- cpumask_t saved_mask;
+ cpumask_var_t saved_mask;
int ret = 0;
unsigned int i;
struct acpi_processor *match_pr;
struct acpi_processor_throttling *p_throttling;
struct throttling_tstate t_state;
- cpumask_t online_throttling_cpus;
+ cpumask_var_t online_throttling_cpus;
if (!pr)
return -EINVAL;
@@ -1003,17 +1014,25 @@ int acpi_processor_set_throttling(struct acpi_processor *pr, int state)
if ((state < 0) || (state > (pr->throttling.state_count - 1)))
return -EINVAL;
- saved_mask = current->cpus_allowed;
+ if (!alloc_cpumask_var(&saved_mask, GFP_KERNEL))
+ return -ENOMEM;
+
+ if (!alloc_cpumask_var(&online_throttling_cpus, GFP_KERNEL)) {
+ free_cpumask_var(saved_mask);
+ return -ENOMEM;
+ }
+
+ cpumask_copy(saved_mask, &current->cpus_allowed);
t_state.target_state = state;
p_throttling = &(pr->throttling);
- cpus_and(online_throttling_cpus, cpu_online_map,
- p_throttling->shared_cpu_map);
+ cpumask_and(online_throttling_cpus, cpu_online_mask,
+ p_throttling->shared_cpu_map);
/*
* The throttling notifier will be called for every
* affected cpu in order to get one proper T-state.
* The notifier event is THROTTLING_PRECHANGE.
*/
- for_each_cpu_mask_nr(i, online_throttling_cpus) {
+ for_each_cpu(i, online_throttling_cpus) {
t_state.cpu = i;
acpi_processor_throttling_notifier(THROTTLING_PRECHANGE,
&t_state);
@@ -1025,7 +1044,8 @@ int acpi_processor_set_throttling(struct acpi_processor *pr, int state)
* it can be called only for the cpu pointed by pr.
*/
if (p_throttling->shared_type == DOMAIN_COORD_TYPE_SW_ANY) {
- set_cpus_allowed_ptr(current, &cpumask_of_cpu(pr->id));
+ /* FIXME: use work_on_cpu() */
+ set_cpus_allowed_ptr(current, cpumask_of(pr->id));
ret = p_throttling->acpi_processor_set_throttling(pr,
t_state.target_state);
} else {
@@ -1034,7 +1054,7 @@ int acpi_processor_set_throttling(struct acpi_processor *pr, int state)
* it is necessary to set T-state for every affected
* cpus.
*/
- for_each_cpu_mask_nr(i, online_throttling_cpus) {
+ for_each_cpu(i, online_throttling_cpus) {
match_pr = per_cpu(processors, i);
/*
* If the pointer is invalid, we will report the
@@ -1056,7 +1076,8 @@ int acpi_processor_set_throttling(struct acpi_processor *pr, int state)
continue;
}
t_state.cpu = i;
- set_cpus_allowed_ptr(current, &cpumask_of_cpu(i));
+ /* FIXME: use work_on_cpu() */
+ set_cpus_allowed_ptr(current, cpumask_of(i));
ret = match_pr->throttling.
acpi_processor_set_throttling(
match_pr, t_state.target_state);
@@ -1068,13 +1089,16 @@ int acpi_processor_set_throttling(struct acpi_processor *pr, int state)
* affected cpu to update the T-states.
* The notifier event is THROTTLING_POSTCHANGE
*/
- for_each_cpu_mask_nr(i, online_throttling_cpus) {
+ for_each_cpu(i, online_throttling_cpus) {
t_state.cpu = i;
acpi_processor_throttling_notifier(THROTTLING_POSTCHANGE,
&t_state);
}
/* restore the previous state */
- set_cpus_allowed_ptr(current, &saved_mask);
+ /* FIXME: use work_on_cpu() */
+ set_cpus_allowed_ptr(current, saved_mask);
+ free_cpumask_var(online_throttling_cpus);
+ free_cpumask_var(saved_mask);
return ret;
}
@@ -1120,7 +1144,7 @@ int acpi_processor_get_throttling_info(struct acpi_processor *pr)
if (acpi_processor_get_tsd(pr)) {
pthrottling = &pr->throttling;
pthrottling->tsd_valid_flag = 0;
- cpu_set(pr->id, pthrottling->shared_cpu_map);
+ cpumask_set_cpu(pr->id, pthrottling->shared_cpu_map);
pthrottling->shared_type = DOMAIN_COORD_TYPE_SW_ALL;
}
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index bd5253ee5c8..39b7233c348 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -751,16 +751,6 @@ static int acpi_bus_get_wakeup_device_flags(struct acpi_device *device)
if (!acpi_match_device_ids(device, button_device_ids))
device->wakeup.flags.run_wake = 1;
- /*
- * Don't set Power button GPE as run_wake
- * if Fixed Power button is used
- */
- if (!strcmp(device->pnp.hardware_id, "PNP0C0C") &&
- !(acpi_gbl_FADT.flags & ACPI_FADT_POWER_BUTTON)) {
- device->wakeup.flags.run_wake = 0;
- device->wakeup.flags.valid = 0;
- }
-
end:
if (ACPI_FAILURE(status))
device->flags.wake_capable = 0;
diff --git a/drivers/acpi/sleep/main.c b/drivers/acpi/sleep/main.c
index 80c0868d048..28a691cc625 100644
--- a/drivers/acpi/sleep/main.c
+++ b/drivers/acpi/sleep/main.c
@@ -90,6 +90,18 @@ void __init acpi_old_suspend_ordering(void)
old_suspend_ordering = true;
}
+/*
+ * According to the ACPI specification the BIOS should make sure that ACPI is
+ * enabled and SCI_EN bit is set on wake-up from S1 - S3 sleep states. Still,
+ * some BIOSes don't do that and therefore we use acpi_enable() to enable ACPI
+ * on such systems during resume. Unfortunately that doesn't help in
+ * particularly pathological cases in which SCI_EN has to be set directly on
+ * resume, although the specification states very clearly that this flag is
+ * owned by the hardware. The set_sci_en_on_resume variable will be set in such
+ * cases.
+ */
+static bool set_sci_en_on_resume;
+
/**
* acpi_pm_disable_gpes - Disable the GPEs.
*/
@@ -235,7 +247,11 @@ static int acpi_suspend_enter(suspend_state_t pm_state)
}
/* If ACPI is not enabled by the BIOS, we need to enable it here. */
- acpi_enable();
+ if (set_sci_en_on_resume)
+ acpi_set_register(ACPI_BITREG_SCI_ENABLE, 1);
+ else
+ acpi_enable();
+
/* Reprogram control registers and execute _BFS */
acpi_leave_sleep_state_prep(acpi_state);
@@ -323,6 +339,12 @@ static int __init init_old_suspend_ordering(const struct dmi_system_id *d)
return 0;
}
+static int __init init_set_sci_en_on_resume(const struct dmi_system_id *d)
+{
+ set_sci_en_on_resume = true;
+ return 0;
+}
+
static struct dmi_system_id __initdata acpisleep_dmi_table[] = {
{
.callback = init_old_suspend_ordering,
@@ -340,6 +362,22 @@ static struct dmi_system_id __initdata acpisleep_dmi_table[] = {
DMI_MATCH(DMI_PRODUCT_NAME, "HP xw4600 Workstation"),
},
},
+ {
+ .callback = init_set_sci_en_on_resume,
+ .ident = "Apple MacBook 1,1",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple Computer, Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "MacBook1,1"),
+ },
+ },
+ {
+ .callback = init_set_sci_en_on_resume,
+ .ident = "Apple MacMini 1,1",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple Computer, Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Macmini1,1"),
+ },
+ },
{},
};
#endif /* CONFIG_SUSPEND */
diff --git a/drivers/acpi/toshiba_acpi.c b/drivers/acpi/toshiba_acpi.c
index 66aac06f2ac..40e60fc2e59 100644
--- a/drivers/acpi/toshiba_acpi.c
+++ b/drivers/acpi/toshiba_acpi.c
@@ -824,34 +824,36 @@ static int __init toshiba_acpi_init(void)
toshiba_acpi_exit();
return -ENOMEM;
}
- }
- /* Register input device for kill switch */
- toshiba_acpi.poll_dev = input_allocate_polled_device();
- if (!toshiba_acpi.poll_dev) {
- printk(MY_ERR "unable to allocate kill-switch input device\n");
- toshiba_acpi_exit();
- return -ENOMEM;
- }
- toshiba_acpi.poll_dev->private = &toshiba_acpi;
- toshiba_acpi.poll_dev->poll = bt_poll_rfkill;
- toshiba_acpi.poll_dev->poll_interval = 1000; /* msecs */
-
- toshiba_acpi.poll_dev->input->name = toshiba_acpi.rfk_name;
- toshiba_acpi.poll_dev->input->id.bustype = BUS_HOST;
- toshiba_acpi.poll_dev->input->id.vendor = 0x0930; /* Toshiba USB ID */
- set_bit(EV_SW, toshiba_acpi.poll_dev->input->evbit);
- set_bit(SW_RFKILL_ALL, toshiba_acpi.poll_dev->input->swbit);
- input_report_switch(toshiba_acpi.poll_dev->input, SW_RFKILL_ALL, TRUE);
- input_sync(toshiba_acpi.poll_dev->input);
-
- ret = input_register_polled_device(toshiba_acpi.poll_dev);
- if (ret) {
- printk(MY_ERR "unable to register kill-switch input device\n");
- rfkill_free(toshiba_acpi.rfk_dev);
- toshiba_acpi.rfk_dev = NULL;
- toshiba_acpi_exit();
- return ret;
+ /* Register input device for kill switch */
+ toshiba_acpi.poll_dev = input_allocate_polled_device();
+ if (!toshiba_acpi.poll_dev) {
+ printk(MY_ERR
+ "unable to allocate kill-switch input device\n");
+ toshiba_acpi_exit();
+ return -ENOMEM;
+ }
+ toshiba_acpi.poll_dev->private = &toshiba_acpi;
+ toshiba_acpi.poll_dev->poll = bt_poll_rfkill;
+ toshiba_acpi.poll_dev->poll_interval = 1000; /* msecs */
+
+ toshiba_acpi.poll_dev->input->name = toshiba_acpi.rfk_name;
+ toshiba_acpi.poll_dev->input->id.bustype = BUS_HOST;
+ /* Toshiba USB ID */
+ toshiba_acpi.poll_dev->input->id.vendor = 0x0930;
+ set_bit(EV_SW, toshiba_acpi.poll_dev->input->evbit);
+ set_bit(SW_RFKILL_ALL, toshiba_acpi.poll_dev->input->swbit);
+ input_report_switch(toshiba_acpi.poll_dev->input,
+ SW_RFKILL_ALL, TRUE);
+ input_sync(toshiba_acpi.poll_dev->input);
+
+ ret = input_register_polled_device(toshiba_acpi.poll_dev);
+ if (ret) {
+ printk(MY_ERR
+ "unable to register kill-switch input device\n");
+ toshiba_acpi_exit();
+ return ret;
+ }
}
return 0;
diff --git a/drivers/acpi/utilities/utglobal.c b/drivers/acpi/utilities/utglobal.c
index 670551b95e5..17ed5ac840f 100644
--- a/drivers/acpi/utilities/utglobal.c
+++ b/drivers/acpi/utilities/utglobal.c
@@ -64,7 +64,7 @@ u32 acpi_dbg_level = ACPI_DEBUG_DEFAULT;
/* Debug switch - layer (component) mask */
-u32 acpi_dbg_layer = ACPI_COMPONENT_DEFAULT | ACPI_ALL_DRIVERS;
+u32 acpi_dbg_layer = 0;
u32 acpi_gbl_nesting_level = 0;
/* Debugger globals */
diff --git a/drivers/acpi/utils.c b/drivers/acpi/utils.c
index e827be36ee8..f844941089b 100644
--- a/drivers/acpi/utils.c
+++ b/drivers/acpi/utils.c
@@ -259,34 +259,26 @@ acpi_evaluate_integer(acpi_handle handle,
struct acpi_object_list *arguments, unsigned long long *data)
{
acpi_status status = AE_OK;
- union acpi_object *element;
+ union acpi_object element;
struct acpi_buffer buffer = { 0, NULL };
-
if (!data)
return AE_BAD_PARAMETER;
- element = kzalloc(sizeof(union acpi_object), irqs_disabled() ? GFP_ATOMIC: GFP_KERNEL);
- if (!element)
- return AE_NO_MEMORY;
-
buffer.length = sizeof(union acpi_object);
- buffer.pointer = element;
+ buffer.pointer = &element;
status = acpi_evaluate_object(handle, pathname, arguments, &buffer);
if (ACPI_FAILURE(status)) {
acpi_util_eval_error(handle, pathname, status);
- kfree(element);
return status;
}
- if (element->type != ACPI_TYPE_INTEGER) {
+ if (element.type != ACPI_TYPE_INTEGER) {
acpi_util_eval_error(handle, pathname, AE_BAD_DATA);
- kfree(element);
return AE_BAD_DATA;
}
- *data = element->integer.value;
- kfree(element);
+ *data = element.integer.value;
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Return value [%llu]\n", *data));
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-28 16:59:26 +0000