summaryrefslogtreecommitdiffstats
path: root/drivers/acpi
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/acpi')
-rw-r--r--drivers/acpi/asus_acpi.c55
-rw-r--r--drivers/acpi/battery.c5
-rw-r--r--drivers/acpi/hardware/hwsleep.c79
-rw-r--r--drivers/acpi/processor_idle.c18
-rw-r--r--drivers/acpi/scan.c2
-rw-r--r--drivers/acpi/sleep/main.c144
-rw-r--r--drivers/acpi/sleep/sleep.h2
-rw-r--r--drivers/acpi/utilities/utresrc.c2
8 files changed, 240 insertions, 67 deletions
diff --git a/drivers/acpi/asus_acpi.c b/drivers/acpi/asus_acpi.c
index d915fec9bf6..d25ef961415 100644
--- a/drivers/acpi/asus_acpi.c
+++ b/drivers/acpi/asus_acpi.c
@@ -142,6 +142,7 @@ struct asus_hotk {
xxN, //M2400N, M3700N, M5200N, M6800N, S1300N, S5200N
A4S, //Z81sp
//(Centrino)
+ F3Sa,
END_MODEL
} model; //Models currently supported
u16 event_count[128]; //count for each event TODO make this better
@@ -405,7 +406,20 @@ static struct model_data model_conf[END_MODEL] = {
.brightness_get = "GPLV",
.mt_bt_switch = "BLED",
.mt_wled = "WLED"
- }
+ },
+
+ {
+ .name = "F3Sa",
+ .mt_bt_switch = "BLED",
+ .mt_wled = "WLED",
+ .mt_mled = "MLED",
+ .brightness_get = "GPLV",
+ .brightness_set = "SPLV",
+ .mt_lcd_switch = "\\_SB.PCI0.SBRG.EC0._Q10",
+ .lcd_status = "\\_SB.PCI0.SBRG.EC0.RPIN",
+ .display_get = "\\ADVG",
+ .display_set = "SDSP",
+ },
};
@@ -710,15 +724,8 @@ static int get_lcd_state(void)
{
int lcd = 0;
- if (hotk->model != L3H) {
- /* We don't have to check anything if we are here */
- if (!read_acpi_int(NULL, hotk->methods->lcd_status, &lcd))
- printk(KERN_WARNING
- "Asus ACPI: Error reading LCD status\n");
-
- if (hotk->model == L2D)
- lcd = ~lcd;
- } else { /* L3H and the like have to be handled differently */
+ if (hotk->model == L3H) {
+ /* L3H and the like have to be handled differently */
acpi_status status = 0;
struct acpi_object_list input;
union acpi_object mt_params[2];
@@ -745,6 +752,32 @@ static int get_lcd_state(void)
if (out_obj.type == ACPI_TYPE_INTEGER)
/* That's what the AML code does */
lcd = out_obj.integer.value >> 8;
+ } else if (hotk->model == F3Sa) {
+ unsigned long tmp;
+ union acpi_object param;
+ struct acpi_object_list input;
+ acpi_status status;
+
+ /* Read pin 11 */
+ param.type = ACPI_TYPE_INTEGER;
+ param.integer.value = 0x11;
+ input.count = 1;
+ input.pointer = &param;
+
+ status = acpi_evaluate_integer(NULL, hotk->methods->lcd_status,
+ &input, &tmp);
+ if (status != AE_OK)
+ return -1;
+
+ lcd = tmp;
+ } else {
+ /* We don't have to check anything if we are here */
+ if (!read_acpi_int(NULL, hotk->methods->lcd_status, &lcd))
+ printk(KERN_WARNING
+ "Asus ACPI: Error reading LCD status\n");
+
+ if (hotk->model == L2D)
+ lcd = ~lcd;
}
return (lcd & 1);
@@ -1134,6 +1167,8 @@ static int asus_model_match(char *model)
return W5A;
else if (strncmp(model, "A4S", 3) == 0)
return A4S;
+ else if (strncmp(model, "F3Sa", 4) == 0)
+ return F3Sa;
else
return END_MODEL;
}
diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c
index c4a769d1ba8..f6215e80980 100644
--- a/drivers/acpi/battery.c
+++ b/drivers/acpi/battery.c
@@ -194,6 +194,9 @@ static int acpi_battery_get_property(struct power_supply *psy,
case POWER_SUPPLY_PROP_MANUFACTURER:
val->strval = battery->oem_info;
break;
+ case POWER_SUPPLY_PROP_SERIAL_NUMBER:
+ val->strval = battery->serial_number;
+ break;
default:
return -EINVAL;
}
@@ -212,6 +215,7 @@ static enum power_supply_property charge_battery_props[] = {
POWER_SUPPLY_PROP_CHARGE_NOW,
POWER_SUPPLY_PROP_MODEL_NAME,
POWER_SUPPLY_PROP_MANUFACTURER,
+ POWER_SUPPLY_PROP_SERIAL_NUMBER,
};
static enum power_supply_property energy_battery_props[] = {
@@ -226,6 +230,7 @@ static enum power_supply_property energy_battery_props[] = {
POWER_SUPPLY_PROP_ENERGY_NOW,
POWER_SUPPLY_PROP_MODEL_NAME,
POWER_SUPPLY_PROP_MANUFACTURER,
+ POWER_SUPPLY_PROP_SERIAL_NUMBER,
};
#endif
diff --git a/drivers/acpi/hardware/hwsleep.c b/drivers/acpi/hardware/hwsleep.c
index 81b24842970..fd1c4ba6336 100644
--- a/drivers/acpi/hardware/hwsleep.c
+++ b/drivers/acpi/hardware/hwsleep.c
@@ -192,18 +192,13 @@ acpi_status acpi_enter_sleep_state_prep(u8 sleep_state)
arg.type = ACPI_TYPE_INTEGER;
arg.integer.value = sleep_state;
- /* Run the _PTS and _GTS methods */
+ /* Run the _PTS method */
status = acpi_evaluate_object(NULL, METHOD_NAME__PTS, &arg_list, NULL);
if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
return_ACPI_STATUS(status);
}
- status = acpi_evaluate_object(NULL, METHOD_NAME__GTS, &arg_list, NULL);
- if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
- return_ACPI_STATUS(status);
- }
-
/* Setup the argument to _SST */
switch (sleep_state) {
@@ -234,10 +229,6 @@ acpi_status acpi_enter_sleep_state_prep(u8 sleep_state)
"While executing method _SST"));
}
- /* Disable/Clear all GPEs */
-
- status = acpi_hw_disable_all_gpes();
-
return_ACPI_STATUS(status);
}
@@ -262,6 +253,8 @@ acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state)
struct acpi_bit_register_info *sleep_type_reg_info;
struct acpi_bit_register_info *sleep_enable_reg_info;
u32 in_value;
+ struct acpi_object_list arg_list;
+ union acpi_object arg;
acpi_status status;
ACPI_FUNCTION_TRACE(acpi_enter_sleep_state);
@@ -307,6 +300,18 @@ acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state)
return_ACPI_STATUS(status);
}
+ /* Execute the _GTS method */
+
+ arg_list.count = 1;
+ arg_list.pointer = &arg;
+ arg.type = ACPI_TYPE_INTEGER;
+ arg.integer.value = sleep_state;
+
+ status = acpi_evaluate_object(NULL, METHOD_NAME__GTS, &arg_list, NULL);
+ if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
+ return_ACPI_STATUS(status);
+ }
+
/* Get current value of PM1A control */
status = acpi_hw_register_read(ACPI_REGISTER_PM1_CONTROL, &PM1Acontrol);
@@ -473,17 +478,18 @@ ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_s4bios)
/*******************************************************************************
*
- * FUNCTION: acpi_leave_sleep_state
+ * FUNCTION: acpi_leave_sleep_state_prep
*
- * PARAMETERS: sleep_state - Which sleep state we just exited
+ * PARAMETERS: sleep_state - Which sleep state we are exiting
*
* RETURN: Status
*
- * DESCRIPTION: Perform OS-independent ACPI cleanup after a sleep
- * Called with interrupts ENABLED.
+ * DESCRIPTION: Perform the first state of OS-independent ACPI cleanup after a
+ * sleep.
+ * Called with interrupts DISABLED.
*
******************************************************************************/
-acpi_status acpi_leave_sleep_state(u8 sleep_state)
+acpi_status acpi_leave_sleep_state_prep(u8 sleep_state)
{
struct acpi_object_list arg_list;
union acpi_object arg;
@@ -493,7 +499,7 @@ acpi_status acpi_leave_sleep_state(u8 sleep_state)
u32 PM1Acontrol;
u32 PM1Bcontrol;
- ACPI_FUNCTION_TRACE(acpi_leave_sleep_state);
+ ACPI_FUNCTION_TRACE(acpi_leave_sleep_state_prep);
/*
* Set SLP_TYPE and SLP_EN to state S0.
@@ -540,6 +546,41 @@ acpi_status acpi_leave_sleep_state(u8 sleep_state)
}
}
+ /* Execute the _BFS method */
+
+ arg_list.count = 1;
+ arg_list.pointer = &arg;
+ arg.type = ACPI_TYPE_INTEGER;
+ arg.integer.value = sleep_state;
+
+ status = acpi_evaluate_object(NULL, METHOD_NAME__BFS, &arg_list, NULL);
+ if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
+ ACPI_EXCEPTION((AE_INFO, status, "During Method _BFS"));
+ }
+
+ return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_leave_sleep_state
+ *
+ * PARAMETERS: sleep_state - Which sleep state we just exited
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Perform OS-independent ACPI cleanup after a sleep
+ * Called with interrupts ENABLED.
+ *
+ ******************************************************************************/
+acpi_status acpi_leave_sleep_state(u8 sleep_state)
+{
+ struct acpi_object_list arg_list;
+ union acpi_object arg;
+ acpi_status status;
+
+ ACPI_FUNCTION_TRACE(acpi_leave_sleep_state);
+
/* Ensure enter_sleep_state_prep -> enter_sleep_state ordering */
acpi_gbl_sleep_type_a = ACPI_SLEEP_TYPE_INVALID;
@@ -558,12 +599,6 @@ acpi_status acpi_leave_sleep_state(u8 sleep_state)
ACPI_EXCEPTION((AE_INFO, status, "During Method _SST"));
}
- arg.integer.value = sleep_state;
- status = acpi_evaluate_object(NULL, METHOD_NAME__BFS, &arg_list, NULL);
- if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
- ACPI_EXCEPTION((AE_INFO, status, "During Method _BFS"));
- }
-
/*
* GPEs must be enabled before _WAK is called as GPEs
* might get fired there
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index eb1f82f7915..199ea214615 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -38,7 +38,7 @@
#include <linux/dmi.h>
#include <linux/moduleparam.h>
#include <linux/sched.h> /* need_resched() */
-#include <linux/latency.h>
+#include <linux/pm_qos_params.h>
#include <linux/clockchips.h>
#include <linux/cpuidle.h>
@@ -648,7 +648,8 @@ static void acpi_processor_idle(void)
if (cx->promotion.state &&
((cx->promotion.state - pr->power.states) <= max_cstate)) {
if (sleep_ticks > cx->promotion.threshold.ticks &&
- cx->promotion.state->latency <= system_latency_constraint()) {
+ cx->promotion.state->latency <=
+ pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY)) {
cx->promotion.count++;
cx->demotion.count = 0;
if (cx->promotion.count >=
@@ -692,7 +693,8 @@ static void acpi_processor_idle(void)
* or if the latency of the current state is unacceptable
*/
if ((pr->power.state - pr->power.states) > max_cstate ||
- pr->power.state->latency > system_latency_constraint()) {
+ pr->power.state->latency >
+ pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY)) {
if (cx->demotion.state)
next_state = cx->demotion.state;
}
@@ -1200,7 +1202,7 @@ static int acpi_processor_power_seq_show(struct seq_file *seq, void *offset)
"maximum allowed latency: %d usec\n",
pr->power.state ? pr->power.state - pr->power.states : 0,
max_cstate, (unsigned)pr->power.bm_activity,
- system_latency_constraint());
+ pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY));
seq_puts(seq, "states:\n");
@@ -1718,8 +1720,9 @@ int __cpuinit acpi_processor_power_init(struct acpi_processor *pr,
"ACPI: processor limited to max C-state %d\n",
max_cstate);
first_run++;
-#if !defined (CONFIG_CPU_IDLE) && defined (CONFIG_SMP)
- register_latency_notifier(&acpi_processor_latency_notifier);
+#if !defined(CONFIG_CPU_IDLE) && defined(CONFIG_SMP)
+ pm_qos_add_notifier(PM_QOS_CPU_DMA_LATENCY,
+ &acpi_processor_latency_notifier);
#endif
}
@@ -1806,7 +1809,8 @@ int acpi_processor_power_exit(struct acpi_processor *pr,
*/
cpu_idle_wait();
#ifdef CONFIG_SMP
- unregister_latency_notifier(&acpi_processor_latency_notifier);
+ pm_qos_remove_notifier(PM_QOS_CPU_DMA_LATENCY,
+ &acpi_processor_latency_notifier);
#endif
}
#endif
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index cbfe9ae7a9e..d9d531cce27 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -830,7 +830,7 @@ static int acpi_bus_get_flags(struct acpi_device *device)
if (ACPI_SUCCESS(status))
device->flags.wake_capable = 1;
- /* TBD: Peformance management */
+ /* TBD: Performance management */
return 0;
}
diff --git a/drivers/acpi/sleep/main.c b/drivers/acpi/sleep/main.c
index 2c0b6630f8b..7f97e32fc33 100644
--- a/drivers/acpi/sleep/main.c
+++ b/drivers/acpi/sleep/main.c
@@ -26,9 +26,24 @@ u8 sleep_states[ACPI_S_STATE_COUNT];
#ifdef CONFIG_PM_SLEEP
static u32 acpi_target_sleep_state = ACPI_STATE_S0;
+static bool acpi_sleep_finish_wake_up;
+
+/*
+ * ACPI 2.0 and later want us to execute _PTS after suspending devices, so we
+ * allow the user to request that behavior by using the 'acpi_new_pts_ordering'
+ * kernel command line option that causes the following variable to be set.
+ */
+static bool new_pts_ordering;
+
+static int __init acpi_new_pts_ordering(char *str)
+{
+ new_pts_ordering = true;
+ return 1;
+}
+__setup("acpi_new_pts_ordering", acpi_new_pts_ordering);
#endif
-int acpi_sleep_prepare(u32 acpi_state)
+static int acpi_sleep_prepare(u32 acpi_state)
{
#ifdef CONFIG_ACPI_SLEEP
/* do we have a wakeup address for S2 and S3? */
@@ -44,6 +59,8 @@ int acpi_sleep_prepare(u32 acpi_state)
ACPI_FLUSH_CPU_CACHE();
acpi_enable_wakeup_device_prep(acpi_state);
#endif
+ printk(KERN_INFO PREFIX "Preparing to enter system sleep state S%d\n",
+ acpi_state);
acpi_enter_sleep_state_prep(acpi_state);
return 0;
}
@@ -63,17 +80,25 @@ static u32 acpi_suspend_states[] = {
static int init_8259A_after_S1;
/**
- * acpi_pm_set_target - Set the target system sleep state to the state
+ * acpi_pm_begin - Set the target system sleep state to the state
* associated with given @pm_state, if supported.
*/
-static int acpi_pm_set_target(suspend_state_t pm_state)
+static int acpi_pm_begin(suspend_state_t pm_state)
{
u32 acpi_state = acpi_suspend_states[pm_state];
int error = 0;
if (sleep_states[acpi_state]) {
acpi_target_sleep_state = acpi_state;
+ if (new_pts_ordering)
+ return 0;
+
+ error = acpi_sleep_prepare(acpi_state);
+ if (error)
+ acpi_target_sleep_state = ACPI_STATE_S0;
+ else
+ acpi_sleep_finish_wake_up = true;
} else {
printk(KERN_ERR "ACPI does not support this state: %d\n",
pm_state);
@@ -91,12 +116,17 @@ static int acpi_pm_set_target(suspend_state_t pm_state)
static int acpi_pm_prepare(void)
{
- int error = acpi_sleep_prepare(acpi_target_sleep_state);
+ if (new_pts_ordering) {
+ int error = acpi_sleep_prepare(acpi_target_sleep_state);
- if (error)
- acpi_target_sleep_state = ACPI_STATE_S0;
+ if (error) {
+ acpi_target_sleep_state = ACPI_STATE_S0;
+ return error;
+ }
+ acpi_sleep_finish_wake_up = true;
+ }
- return error;
+ return ACPI_SUCCESS(acpi_hw_disable_all_gpes()) ? 0 : -EFAULT;
}
/**
@@ -120,10 +150,8 @@ static int acpi_pm_enter(suspend_state_t pm_state)
if (acpi_state == ACPI_STATE_S3) {
int error = acpi_save_state_mem();
- if (error) {
- acpi_target_sleep_state = ACPI_STATE_S0;
+ if (error)
return error;
- }
}
local_irq_save(flags);
@@ -139,6 +167,9 @@ static int acpi_pm_enter(suspend_state_t pm_state)
break;
}
+ /* Reprogram control registers and execute _BFS */
+ acpi_leave_sleep_state_prep(acpi_state);
+
/* ACPI 3.0 specs (P62) says that it's the responsabilty
* of the OSPM to clear the status bit [ implying that the
* POWER_BUTTON event should not reach userspace ]
@@ -146,6 +177,13 @@ static int acpi_pm_enter(suspend_state_t pm_state)
if (ACPI_SUCCESS(status) && (acpi_state == ACPI_STATE_S3))
acpi_clear_event(ACPI_EVENT_POWER_BUTTON);
+ /*
+ * Disable and clear GPE status before interrupt is enabled. Some GPEs
+ * (like wakeup GPE) haven't handler, this can avoid such GPE misfire.
+ * acpi_leave_sleep_state will reenable specific GPEs later
+ */
+ acpi_hw_disable_all_gpes();
+
local_irq_restore(flags);
printk(KERN_DEBUG "Back to C!\n");
@@ -157,7 +195,7 @@ static int acpi_pm_enter(suspend_state_t pm_state)
}
/**
- * acpi_pm_finish - Finish up suspend sequence.
+ * acpi_pm_finish - Instruct the platform to leave a sleep state.
*
* This is called after we wake back up (or if entering the sleep state
* failed).
@@ -174,6 +212,7 @@ static void acpi_pm_finish(void)
acpi_set_firmware_waking_vector((acpi_physical_address) 0);
acpi_target_sleep_state = ACPI_STATE_S0;
+ acpi_sleep_finish_wake_up = false;
#ifdef CONFIG_X86
if (init_8259A_after_S1) {
@@ -183,6 +222,20 @@ static void acpi_pm_finish(void)
#endif
}
+/**
+ * acpi_pm_end - Finish up suspend sequence.
+ */
+
+static void acpi_pm_end(void)
+{
+ /*
+ * This is necessary in case acpi_pm_finish() is not called directly
+ * during a failing transition to a sleep state.
+ */
+ if (acpi_sleep_finish_wake_up)
+ acpi_pm_finish();
+}
+
static int acpi_pm_state_valid(suspend_state_t pm_state)
{
u32 acpi_state;
@@ -201,10 +254,11 @@ static int acpi_pm_state_valid(suspend_state_t pm_state)
static struct platform_suspend_ops acpi_pm_ops = {
.valid = acpi_pm_state_valid,
- .set_target = acpi_pm_set_target,
+ .begin = acpi_pm_begin,
.prepare = acpi_pm_prepare,
.enter = acpi_pm_enter,
.finish = acpi_pm_finish,
+ .end = acpi_pm_end,
};
/*
@@ -229,15 +283,36 @@ static struct dmi_system_id __initdata acpisleep_dmi_table[] = {
#endif /* CONFIG_SUSPEND */
#ifdef CONFIG_HIBERNATION
-static int acpi_hibernation_start(void)
+static int acpi_hibernation_begin(void)
{
+ int error;
+
acpi_target_sleep_state = ACPI_STATE_S4;
- return 0;
+ if (new_pts_ordering)
+ return 0;
+
+ error = acpi_sleep_prepare(ACPI_STATE_S4);
+ if (error)
+ acpi_target_sleep_state = ACPI_STATE_S0;
+ else
+ acpi_sleep_finish_wake_up = true;
+
+ return error;
}
static int acpi_hibernation_prepare(void)
{
- return acpi_sleep_prepare(ACPI_STATE_S4);
+ if (new_pts_ordering) {
+ int error = acpi_sleep_prepare(ACPI_STATE_S4);
+
+ if (error) {
+ acpi_target_sleep_state = ACPI_STATE_S0;
+ return error;
+ }
+ acpi_sleep_finish_wake_up = true;
+ }
+
+ return ACPI_SUCCESS(acpi_hw_disable_all_gpes()) ? 0 : -EFAULT;
}
static int acpi_hibernation_enter(void)
@@ -251,6 +326,8 @@ static int acpi_hibernation_enter(void)
acpi_enable_wakeup_device(ACPI_STATE_S4);
/* This shouldn't return. If it returns, we have a problem */
status = acpi_enter_sleep_state(ACPI_STATE_S4);
+ /* Reprogram control registers and execute _BFS */
+ acpi_leave_sleep_state_prep(ACPI_STATE_S4);
local_irq_restore(flags);
return ACPI_SUCCESS(status) ? 0 : -EFAULT;
@@ -263,15 +340,12 @@ static void acpi_hibernation_leave(void)
* enable it here.
*/
acpi_enable();
+ /* Reprogram control registers and execute _BFS */
+ acpi_leave_sleep_state_prep(ACPI_STATE_S4);
}
static void acpi_hibernation_finish(void)
{
- /*
- * If ACPI is not enabled by the BIOS and the boot kernel, we need to
- * enable it here.
- */
- acpi_enable();
acpi_disable_wakeup_device(ACPI_STATE_S4);
acpi_leave_sleep_state(ACPI_STATE_S4);
@@ -279,6 +353,17 @@ static void acpi_hibernation_finish(void)
acpi_set_firmware_waking_vector((acpi_physical_address) 0);
acpi_target_sleep_state = ACPI_STATE_S0;
+ acpi_sleep_finish_wake_up = false;
+}
+
+static void acpi_hibernation_end(void)
+{
+ /*
+ * This is necessary in case acpi_hibernation_finish() is not called
+ * directly during a failing transition to the sleep state.
+ */
+ if (acpi_sleep_finish_wake_up)
+ acpi_hibernation_finish();
}
static int acpi_hibernation_pre_restore(void)
@@ -296,7 +381,8 @@ static void acpi_hibernation_restore_cleanup(void)
}
static struct platform_hibernation_ops acpi_hibernation_ops = {
- .start = acpi_hibernation_start,
+ .begin = acpi_hibernation_begin,
+ .end = acpi_hibernation_end,
.pre_snapshot = acpi_hibernation_prepare,
.finish = acpi_hibernation_finish,
.prepare = acpi_hibernation_prepare,
@@ -386,11 +472,20 @@ int acpi_pm_device_sleep_state(struct device *dev, int wake, int *d_min_p)
if (acpi_target_sleep_state == ACPI_STATE_S0 ||
(wake && adev->wakeup.state.enabled &&
adev->wakeup.sleep_state <= acpi_target_sleep_state)) {
+ acpi_status status;
+
acpi_method[3] = 'W';
- acpi_evaluate_integer(handle, acpi_method, NULL, &d_max);
- /* Sanity check */
- if (d_max < d_min)
+ status = acpi_evaluate_integer(handle, acpi_method, NULL,
+ &d_max);
+ if (ACPI_FAILURE(status)) {
+ d_max = d_min;
+ } else if (d_max < d_min) {
+ /* Warn the user of the broken DSDT */
+ printk(KERN_WARNING "ACPI: Wrong value from %s\n",
+ acpi_method);
+ /* Sanitize it */
d_min = d_max;
+ }
}
if (d_min_p)
@@ -403,6 +498,7 @@ static void acpi_power_off_prepare(void)
{
/* Prepare to power off the system */
acpi_sleep_prepare(ACPI_STATE_S5);
+ acpi_hw_disable_all_gpes();
}
static void acpi_power_off(void)
diff --git a/drivers/acpi/sleep/sleep.h b/drivers/acpi/sleep/sleep.h
index a2ea125ae2d..cfaf8f5b0a1 100644
--- a/drivers/acpi/sleep/sleep.h
+++ b/drivers/acpi/sleep/sleep.h
@@ -5,5 +5,3 @@ extern int acpi_suspend (u32 state);
extern void acpi_enable_wakeup_device_prep(u8 sleep_state);
extern void acpi_enable_wakeup_device(u8 sleep_state);
extern void acpi_disable_wakeup_device(u8 sleep_state);
-
-extern int acpi_sleep_prepare(u32 acpi_state);
diff --git a/drivers/acpi/utilities/utresrc.c b/drivers/acpi/utilities/utresrc.c
index cbbd3315a1e..b630ee137ee 100644
--- a/drivers/acpi/utilities/utresrc.c
+++ b/drivers/acpi/utilities/utresrc.c
@@ -1,6 +1,6 @@
/*******************************************************************************
*
- * Module Name: utresrc - Resource managment utilities
+ * Module Name: utresrc - Resource management utilities
*
******************************************************************************/
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-02-21 01:51:29 +0000