diff options
Diffstat (limited to 'drivers/acpi')
| -rw-r--r-- | drivers/acpi/sleep/main.c | 276 |
1 files changed, 163 insertions, 113 deletions
diff --git a/drivers/acpi/sleep/main.c b/drivers/acpi/sleep/main.c index 0f2caea2fc8..4addf8ad50a 100644 --- a/drivers/acpi/sleep/main.c +++ b/drivers/acpi/sleep/main.c @@ -24,10 +24,6 @@ u8 sleep_states[ACPI_S_STATE_COUNT]; -#ifdef CONFIG_PM_SLEEP -static u32 acpi_target_sleep_state = ACPI_STATE_S0; -#endif - static int acpi_sleep_prepare(u32 acpi_state) { #ifdef CONFIG_ACPI_SLEEP @@ -50,9 +46,96 @@ static int acpi_sleep_prepare(u32 acpi_state) return 0; } -#ifdef CONFIG_SUSPEND -static struct platform_suspend_ops acpi_suspend_ops; +#ifdef CONFIG_PM_SLEEP +static u32 acpi_target_sleep_state = ACPI_STATE_S0; + +/* + * ACPI 1.0 wants us to execute _PTS before suspending devices, so we allow the + * user to request that behavior by using the 'acpi_old_suspend_ordering' + * kernel command line option that causes the following variable to be set. + */ +static bool old_suspend_ordering; + +void __init acpi_old_suspend_ordering(void) +{ + old_suspend_ordering = true; +} + +/** + * acpi_pm_disable_gpes - Disable the GPEs. + */ +static int acpi_pm_disable_gpes(void) +{ + acpi_hw_disable_all_gpes(); + return 0; +} + +/** + * __acpi_pm_prepare - Prepare the platform to enter the target state. + * + * If necessary, set the firmware waking vector and do arch-specific + * nastiness to get the wakeup code to the waking vector. + */ +static int __acpi_pm_prepare(void) +{ + int error = acpi_sleep_prepare(acpi_target_sleep_state); + + if (error) + acpi_target_sleep_state = ACPI_STATE_S0; + return error; +} + +/** + * acpi_pm_prepare - Prepare the platform to enter the target sleep + * state and disable the GPEs. + */ +static int acpi_pm_prepare(void) +{ + int error = __acpi_pm_prepare(); + + if (!error) + acpi_hw_disable_all_gpes(); + return error; +} + +/** + * acpi_pm_finish - Instruct the platform to leave a sleep state. + * + * This is called after we wake back up (or if entering the sleep state + * failed). + */ +static void acpi_pm_finish(void) +{ + u32 acpi_state = acpi_target_sleep_state; + + if (acpi_state == ACPI_STATE_S0) + return; + printk(KERN_INFO PREFIX "Waking up from system sleep state S%d\n", + acpi_state); + acpi_disable_wakeup_device(acpi_state); + acpi_leave_sleep_state(acpi_state); + + /* reset firmware waking vector */ + acpi_set_firmware_waking_vector((acpi_physical_address) 0); + + acpi_target_sleep_state = ACPI_STATE_S0; +} + +/** + * acpi_pm_end - Finish up suspend sequence. + */ +static void acpi_pm_end(void) +{ + /* + * This is necessary in case acpi_pm_finish() is not called during a + * failing transition to a sleep state. + */ + acpi_target_sleep_state = ACPI_STATE_S0; +} +#endif /* CONFIG_PM_SLEEP */ + +#ifdef CONFIG_SUSPEND extern void do_suspend_lowlevel(void); static u32 acpi_suspend_states[] = { @@ -66,7 +149,6 @@ static u32 acpi_suspend_states[] = { * acpi_suspend_begin - Set the target system sleep state to the state * associated with given @pm_state, if supported. */ - static int acpi_suspend_begin(suspend_state_t pm_state) { u32 acpi_state = acpi_suspend_states[pm_state]; @@ -83,25 +165,6 @@ static int acpi_suspend_begin(suspend_state_t pm_state) } /** - * acpi_suspend_prepare - Do preliminary suspend work. - * - * If necessary, set the firmware waking vector and do arch-specific - * nastiness to get the wakeup code to the waking vector. - */ - -static int acpi_suspend_prepare(void) -{ - int error = acpi_sleep_prepare(acpi_target_sleep_state); - - if (error) { - acpi_target_sleep_state = ACPI_STATE_S0; - return error; - } - - return ACPI_SUCCESS(acpi_hw_disable_all_gpes()) ? 0 : -EFAULT; -} - -/** * acpi_suspend_enter - Actually enter a sleep state. * @pm_state: ignored * @@ -109,7 +172,6 @@ static int acpi_suspend_prepare(void) * assembly, which in turn call acpi_enter_sleep_state(). * It's unfortunate, but it works. Please fix if you're feeling frisky. */ - static int acpi_suspend_enter(suspend_state_t pm_state) { acpi_status status = AE_OK; @@ -166,39 +228,6 @@ static int acpi_suspend_enter(suspend_state_t pm_state) return ACPI_SUCCESS(status) ? 0 : -EFAULT; } -/** - * acpi_suspend_finish - Instruct the platform to leave a sleep state. - * - * This is called after we wake back up (or if entering the sleep state - * failed). - */ - -static void acpi_suspend_finish(void) -{ - u32 acpi_state = acpi_target_sleep_state; - - acpi_disable_wakeup_device(acpi_state); - acpi_leave_sleep_state(acpi_state); - - /* reset firmware waking vector */ - acpi_set_firmware_waking_vector((acpi_physical_address) 0); - - acpi_target_sleep_state = ACPI_STATE_S0; -} - -/** - * acpi_suspend_end - Finish up suspend sequence. - */ - -static void acpi_suspend_end(void) -{ - /* - * This is necessary in case acpi_suspend_finish() is not called during a - * failing transition to a sleep state. - */ - acpi_target_sleep_state = ACPI_STATE_S0; -} - static int acpi_suspend_state_valid(suspend_state_t pm_state) { u32 acpi_state; @@ -218,10 +247,39 @@ static int acpi_suspend_state_valid(suspend_state_t pm_state) static struct platform_suspend_ops acpi_suspend_ops = { .valid = acpi_suspend_state_valid, .begin = acpi_suspend_begin, - .prepare = acpi_suspend_prepare, + .prepare = acpi_pm_prepare, + .enter = acpi_suspend_enter, + .finish = acpi_pm_finish, + .end = acpi_pm_end, +}; + +/** + * acpi_suspend_begin_old - Set the target system sleep state to the + * state associated with given @pm_state, if supported, and + * execute the _PTS control method. This function is used if the + * pre-ACPI 2.0 suspend ordering has been requested. + */ +static int acpi_suspend_begin_old(suspend_state_t pm_state) +{ + int error = acpi_suspend_begin(pm_state); + + if (!error) + error = __acpi_pm_prepare(); + return error; +} + +/* + * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has + * been requested. + */ +static struct platform_suspend_ops acpi_suspend_ops_old = { + .valid = acpi_suspend_state_valid, + .begin = acpi_suspend_begin_old, + .prepare = acpi_pm_disable_gpes, .enter = acpi_suspend_enter, - .finish = acpi_suspend_finish, - .end = acpi_suspend_end, + .finish = acpi_pm_finish, + .end = acpi_pm_end, + .recover = acpi_pm_finish, }; #endif /* CONFIG_SUSPEND */ @@ -229,22 +287,9 @@ static struct platform_suspend_ops acpi_suspend_ops = { static int acpi_hibernation_begin(void) { acpi_target_sleep_state = ACPI_STATE_S4; - return 0; } -static int acpi_hibernation_prepare(void) -{ - int error = acpi_sleep_prepare(ACPI_STATE_S4); - - if (error) { - acpi_target_sleep_state = ACPI_STATE_S0; - return error; - } - - return ACPI_SUCCESS(acpi_hw_disable_all_gpes()) ? 0 : -EFAULT; -} - static int acpi_hibernation_enter(void) { acpi_status status = AE_OK; @@ -274,52 +319,55 @@ static void acpi_hibernation_leave(void) acpi_leave_sleep_state_prep(ACPI_STATE_S4); } -static void acpi_hibernation_finish(void) +static void acpi_pm_enable_gpes(void) { - acpi_disable_wakeup_device(ACPI_STATE_S4); - acpi_leave_sleep_state(ACPI_STATE_S4); - - /* reset firmware waking vector */ - acpi_set_firmware_waking_vector((acpi_physical_address) 0); - - acpi_target_sleep_state = ACPI_STATE_S0; + acpi_hw_enable_all_runtime_gpes(); } -static void acpi_hibernation_end(void) -{ - /* - * This is necessary in case acpi_hibernation_finish() is not called - * during a failing transition to the sleep state. - */ - acpi_target_sleep_state = ACPI_STATE_S0; -} +static struct platform_hibernation_ops acpi_hibernation_ops = { + .begin = acpi_hibernation_begin, + .end = acpi_pm_end, + .pre_snapshot = acpi_pm_prepare, + .finish = acpi_pm_finish, + .prepare = acpi_pm_prepare, + .enter = acpi_hibernation_enter, + .leave = acpi_hibernation_leave, + .pre_restore = acpi_pm_disable_gpes, + .restore_cleanup = acpi_pm_enable_gpes, +}; -static int acpi_hibernation_pre_restore(void) +/** + * acpi_hibernation_begin_old - Set the target system sleep state to + * ACPI_STATE_S4 and execute the _PTS control method. This + * function is used if the pre-ACPI 2.0 suspend ordering has been + * requested. + */ +static int acpi_hibernation_begin_old(void) { - acpi_status status; - - status = acpi_hw_disable_all_gpes(); - - return ACPI_SUCCESS(status) ? 0 : -EFAULT; -} + int error = acpi_sleep_prepare(ACPI_STATE_S4); -static void acpi_hibernation_restore_cleanup(void) -{ - acpi_hw_enable_all_runtime_gpes(); + if (!error) + acpi_target_sleep_state = ACPI_STATE_S4; + return error; } -static struct platform_hibernation_ops acpi_hibernation_ops = { - .begin = acpi_hibernation_begin, - .end = acpi_hibernation_end, - .pre_snapshot = acpi_hibernation_prepare, - .finish = acpi_hibernation_finish, - .prepare = acpi_hibernation_prepare, +/* + * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has + * been requested. + */ +static struct platform_hibernation_ops acpi_hibernation_ops_old = { + .begin = acpi_hibernation_begin_old, + .end = acpi_pm_end, + .pre_snapshot = acpi_pm_disable_gpes, + .finish = acpi_pm_finish, + .prepare = acpi_pm_disable_gpes, .enter = acpi_hibernation_enter, .leave = acpi_hibernation_leave, - .pre_restore = acpi_hibernation_pre_restore, - .restore_cleanup = acpi_hibernation_restore_cleanup, + .pre_restore = acpi_pm_disable_gpes, + .restore_cleanup = acpi_pm_enable_gpes, + .recover = acpi_pm_finish, }; -#endif /* CONFIG_HIBERNATION */ +#endif /* CONFIG_HIBERNATION */ int acpi_suspend(u32 acpi_state) { @@ -461,13 +509,15 @@ int __init acpi_sleep_init(void) } } - suspend_set_ops(&acpi_suspend_ops); + suspend_set_ops(old_suspend_ordering ? + &acpi_suspend_ops_old : &acpi_suspend_ops); #endif #ifdef CONFIG_HIBERNATION status = acpi_get_sleep_type_data(ACPI_STATE_S4, &type_a, &type_b); if (ACPI_SUCCESS(status)) { - hibernation_set_ops(&acpi_hibernation_ops); + hibernation_set_ops(old_suspend_ordering ? + &acpi_hibernation_ops_old : &acpi_hibernation_ops); sleep_states[ACPI_STATE_S4] = 1; printk(" S4"); } |