summaryrefslogtreecommitdiffstats
path: root/drivers/acpi
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/acpi')
-rw-r--r--drivers/acpi/ec.c17
-rw-r--r--drivers/acpi/pci_irq.c98
-rw-r--r--drivers/acpi/processor_core.c16
-rw-r--r--drivers/acpi/utilities/utobject.c2
-rw-r--r--drivers/acpi/video.c2
5 files changed, 121 insertions, 14 deletions
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index caf873c14bf..e7e197e3a4f 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -129,6 +129,7 @@ static struct acpi_ec {
struct mutex lock;
wait_queue_head_t wait;
struct list_head list;
+ atomic_t irq_count;
u8 handlers_installed;
} *boot_ec, *first_ec;
@@ -181,6 +182,8 @@ static int acpi_ec_wait(struct acpi_ec *ec, enum ec_event event, int force_poll)
{
int ret = 0;
+ atomic_set(&ec->irq_count, 0);
+
if (unlikely(event == ACPI_EC_EVENT_OBF_1 &&
test_bit(EC_FLAGS_NO_OBF1_GPE, &ec->flags)))
force_poll = 1;
@@ -227,6 +230,7 @@ static int acpi_ec_wait(struct acpi_ec *ec, enum ec_event event, int force_poll)
while (time_before(jiffies, delay)) {
if (acpi_ec_check_status(ec, event))
goto end;
+ msleep(5);
}
}
pr_err(PREFIX "acpi_ec_wait timeout,"
@@ -529,6 +533,13 @@ static u32 acpi_ec_gpe_handler(void *data)
struct acpi_ec *ec = data;
pr_debug(PREFIX "~~~> interrupt\n");
+ atomic_inc(&ec->irq_count);
+ if (atomic_read(&ec->irq_count) > 5) {
+ pr_err(PREFIX "GPE storm detected, disabling EC GPE\n");
+ acpi_disable_gpe(NULL, ec->gpe, ACPI_ISR);
+ clear_bit(EC_FLAGS_GPE_MODE, &ec->flags);
+ return ACPI_INTERRUPT_HANDLED;
+ }
clear_bit(EC_FLAGS_WAIT_GPE, &ec->flags);
if (test_bit(EC_FLAGS_GPE_MODE, &ec->flags))
wake_up(&ec->wait);
@@ -943,11 +954,7 @@ int __init acpi_ec_ecdt_probe(void)
boot_ec->command_addr = ecdt_ptr->control.address;
boot_ec->data_addr = ecdt_ptr->data.address;
boot_ec->gpe = ecdt_ptr->gpe;
- if (ACPI_FAILURE(acpi_get_handle(NULL, ecdt_ptr->id,
- &boot_ec->handle))) {
- pr_info("Failed to locate handle for boot EC\n");
- boot_ec->handle = ACPI_ROOT_OBJECT;
- }
+ boot_ec->handle = ACPI_ROOT_OBJECT;
} else {
/* This workaround is needed only on some broken machines,
* which require early EC, but fail to provide ECDT */
diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c
index 7f19859580c..7af414a3c63 100644
--- a/drivers/acpi/pci_irq.c
+++ b/drivers/acpi/pci_irq.c
@@ -25,6 +25,7 @@
*/
+#include <linux/dmi.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
@@ -76,6 +77,101 @@ static struct acpi_prt_entry *acpi_pci_irq_find_prt_entry(int segment,
return NULL;
}
+/* http://bugzilla.kernel.org/show_bug.cgi?id=4773 */
+static struct dmi_system_id medion_md9580[] = {
+ {
+ .ident = "Medion MD9580-F laptop",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "MEDIONNB"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "A555"),
+ },
+ },
+ { }
+};
+
+/* http://bugzilla.kernel.org/show_bug.cgi?id=5044 */
+static struct dmi_system_id dell_optiplex[] = {
+ {
+ .ident = "Dell Optiplex GX1",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex GX1 600S+"),
+ },
+ },
+ { }
+};
+
+/* http://bugzilla.kernel.org/show_bug.cgi?id=10138 */
+static struct dmi_system_id hp_t5710[] = {
+ {
+ .ident = "HP t5710",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "hp t5000 series"),
+ DMI_MATCH(DMI_BOARD_NAME, "098Ch"),
+ },
+ },
+ { }
+};
+
+struct prt_quirk {
+ struct dmi_system_id *system;
+ unsigned int segment;
+ unsigned int bus;
+ unsigned int device;
+ unsigned char pin;
+ char *source; /* according to BIOS */
+ char *actual_source;
+};
+
+/*
+ * These systems have incorrect _PRT entries. The BIOS claims the PCI
+ * interrupt at the listed segment/bus/device/pin is connected to the first
+ * link device, but it is actually connected to the second.
+ */
+static struct prt_quirk prt_quirks[] = {
+ { medion_md9580, 0, 0, 9, 'A',
+ "\\_SB_.PCI0.ISA.LNKA",
+ "\\_SB_.PCI0.ISA.LNKB"},
+ { dell_optiplex, 0, 0, 0xd, 'A',
+ "\\_SB_.LNKB",
+ "\\_SB_.LNKA"},
+ { hp_t5710, 0, 0, 1, 'A',
+ "\\_SB_.PCI0.LNK1",
+ "\\_SB_.PCI0.LNK3"},
+};
+
+static void
+do_prt_fixups(struct acpi_prt_entry *entry, struct acpi_pci_routing_table *prt)
+{
+ int i;
+ struct prt_quirk *quirk;
+
+ for (i = 0; i < ARRAY_SIZE(prt_quirks); i++) {
+ quirk = &prt_quirks[i];
+
+ /* All current quirks involve link devices, not GSIs */
+ if (!prt->source)
+ continue;
+
+ if (dmi_check_system(quirk->system) &&
+ entry->id.segment == quirk->segment &&
+ entry->id.bus == quirk->bus &&
+ entry->id.device == quirk->device &&
+ entry->pin + 'A' == quirk->pin &&
+ !strcmp(prt->source, quirk->source) &&
+ strlen(prt->source) >= strlen(quirk->actual_source)) {
+ printk(KERN_WARNING PREFIX "firmware reports "
+ "%04x:%02x:%02x[%c] connected to %s; "
+ "changing to %s\n",
+ entry->id.segment, entry->id.bus,
+ entry->id.device, 'A' + entry->pin,
+ prt->source, quirk->actual_source);
+ strcpy(prt->source, quirk->actual_source);
+ }
+ }
+}
+
static int
acpi_pci_irq_add_entry(acpi_handle handle,
int segment, int bus, struct acpi_pci_routing_table *prt)
@@ -96,6 +192,8 @@ acpi_pci_irq_add_entry(acpi_handle handle,
entry->id.function = prt->address & 0xFFFF;
entry->pin = prt->pin;
+ do_prt_fixups(entry, prt);
+
/*
* Type 1: Dynamic
* ---------------
diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c
index a3cc8a98255..d9316ab6634 100644
--- a/drivers/acpi/processor_core.c
+++ b/drivers/acpi/processor_core.c
@@ -840,17 +840,19 @@ static int is_processor_present(acpi_handle handle)
status = acpi_evaluate_integer(handle, "_STA", NULL, &sta);
- /*
- * if a processor object does not have an _STA object,
- * OSPM assumes that the processor is present.
- */
- if (status == AE_NOT_FOUND)
- return 1;
if (ACPI_SUCCESS(status) && (sta & ACPI_STA_DEVICE_PRESENT))
return 1;
- ACPI_EXCEPTION((AE_INFO, status, "Processor Device is not present"));
+ /*
+ * _STA is mandatory for a processor that supports hot plug
+ */
+ if (status == AE_NOT_FOUND)
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ "Processor does not support hot plug\n"));
+ else
+ ACPI_EXCEPTION((AE_INFO, status,
+ "Processor Device is not present"));
return 0;
}
diff --git a/drivers/acpi/utilities/utobject.c b/drivers/acpi/utilities/utobject.c
index 76ee766c84f..e08b3fa6639 100644
--- a/drivers/acpi/utilities/utobject.c
+++ b/drivers/acpi/utilities/utobject.c
@@ -432,7 +432,7 @@ acpi_ut_get_simple_object_size(union acpi_operand_object *internal_object,
* element -- which is legal)
*/
if (!internal_object) {
- *obj_length = 0;
+ *obj_length = sizeof(union acpi_object);
return_ACPI_STATUS(AE_OK);
}
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index 12cce69b544..ace958cb389 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -713,7 +713,7 @@ static void acpi_video_device_find_cap(struct acpi_video_device *device)
kfree(obj);
- if (device->cap._BCL && device->cap._BCM && device->cap._BQC && max_level > 0){
+ if (device->cap._BCL && device->cap._BCM && max_level > 0) {
int result;
static int count = 0;
char *name;