diff options
Diffstat (limited to 'drivers/acpi')
| -rw-r--r-- | drivers/acpi/Kconfig | 18 | ||||
| -rw-r--r-- | drivers/acpi/Makefile | 1 | ||||
| -rw-r--r-- | drivers/acpi/acpi_pad.c | 2 | ||||
| -rw-r--r-- | drivers/acpi/acpica/evxfevnt.c | 19 | ||||
| -rw-r--r-- | drivers/acpi/battery.c | 8 | ||||
| -rw-r--r-- | drivers/acpi/blacklist.c | 2 | ||||
| -rw-r--r-- | drivers/acpi/ec.c | 107 | ||||
| -rw-r--r-- | drivers/acpi/ec_sys.c | 160 | ||||
| -rw-r--r-- | drivers/acpi/internal.h | 24 | ||||
| -rw-r--r-- | drivers/acpi/osl.c | 40 | ||||
| -rw-r--r-- | drivers/acpi/pci_root.c | 9 | ||||
| -rw-r--r-- | drivers/acpi/processor_core.c | 2 | ||||
| -rw-r--r-- | drivers/acpi/processor_idle.c | 14 | ||||
| -rw-r--r-- | drivers/acpi/sleep.c | 35 |
14 files changed, 286 insertions, 155 deletions
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index 74641151880..08e0140920e 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -104,6 +104,24 @@ config ACPI_SYSFS_POWER help Say N to disable power /sys interface +config ACPI_EC_DEBUGFS + tristate "EC read/write access through /sys/kernel/debug/ec" + default n + help + Say N to disable Embedded Controller /sys/kernel/debug interface + + Be aware that using this interface can confuse your Embedded + Controller in a way that a normal reboot is not enough. You then + have to power of your system, and remove the laptop battery for + some seconds. + An Embedded Controller typically is available on laptops and reads + sensor values like battery state and temperature. + The kernel accesses the EC through ACPI parsed code provided by BIOS + tables. This option allows to access the EC directly without ACPI + code being involved. + Thus this option is a debug option that helps to write ACPI drivers + and can be used to identify ACPI code or EC firmware bugs. + config ACPI_PROC_EVENT bool "Deprecated /proc/acpi/event support" depends on PROC_FS diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index 6ee33169e1d..833b582d176 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -60,6 +60,7 @@ obj-$(CONFIG_ACPI_SBS) += sbshc.o obj-$(CONFIG_ACPI_SBS) += sbs.o obj-$(CONFIG_ACPI_POWER_METER) += power_meter.o obj-$(CONFIG_ACPI_HED) += hed.o +obj-$(CONFIG_ACPI_EC_DEBUGFS) += ec_sys.o # processor has its own "processor." module_param namespace processor-y := processor_driver.o processor_throttling.o diff --git a/drivers/acpi/acpi_pad.c b/drivers/acpi/acpi_pad.c index 446aced33af..b76848c80be 100644 --- a/drivers/acpi/acpi_pad.c +++ b/drivers/acpi/acpi_pad.c @@ -77,7 +77,7 @@ static void power_saving_mwait_init(void) power_saving_mwait_eax = (highest_cstate << MWAIT_SUBSTATE_SIZE) | (highest_subcstate - 1); -#if defined(CONFIG_GENERIC_TIME) && defined(CONFIG_X86) +#if defined(CONFIG_X86) switch (boot_cpu_data.x86_vendor) { case X86_VENDOR_AMD: case X86_VENDOR_INTEL: diff --git a/drivers/acpi/acpica/evxfevnt.c b/drivers/acpi/acpica/evxfevnt.c index d97b8dce166..18b3f1468b7 100644 --- a/drivers/acpi/acpica/evxfevnt.c +++ b/drivers/acpi/acpica/evxfevnt.c @@ -70,6 +70,7 @@ acpi_ev_get_gpe_device(struct acpi_gpe_xrupt_info *gpe_xrupt_info, acpi_status acpi_enable(void) { acpi_status status; + int retry; ACPI_FUNCTION_TRACE(acpi_enable); @@ -98,16 +99,18 @@ acpi_status acpi_enable(void) /* Sanity check that transition succeeded */ - if (acpi_hw_get_mode() != ACPI_SYS_MODE_ACPI) { - ACPI_ERROR((AE_INFO, - "Hardware did not enter ACPI mode")); - return_ACPI_STATUS(AE_NO_HARDWARE_RESPONSE); + for (retry = 0; retry < 30000; ++retry) { + if (acpi_hw_get_mode() == ACPI_SYS_MODE_ACPI) { + if (retry != 0) + ACPI_WARNING((AE_INFO, + "Platform took > %d00 usec to enter ACPI mode", retry)); + return_ACPI_STATUS(AE_OK); + } + acpi_os_stall(100); /* 100 usec */ } - ACPI_DEBUG_PRINT((ACPI_DB_INIT, - "Transition to ACPI mode successful\n")); - - return_ACPI_STATUS(AE_OK); + ACPI_ERROR((AE_INFO, "Hardware did not enter ACPI mode")); + return_ACPI_STATUS(AE_NO_HARDWARE_RESPONSE); } ACPI_EXPORT_SYMBOL(acpi_enable) diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c index 3026e3fa83e..dc58402b0a1 100644 --- a/drivers/acpi/battery.c +++ b/drivers/acpi/battery.c @@ -868,9 +868,15 @@ static void acpi_battery_remove_fs(struct acpi_device *device) static void acpi_battery_notify(struct acpi_device *device, u32 event) { struct acpi_battery *battery = acpi_driver_data(device); +#ifdef CONFIG_ACPI_SYSFS_POWER + struct device *old; +#endif if (!battery) return; +#ifdef CONFIG_ACPI_SYSFS_POWER + old = battery->bat.dev; +#endif acpi_battery_update(battery); acpi_bus_generate_proc_event(device, event, acpi_battery_present(battery)); @@ -879,7 +885,7 @@ static void acpi_battery_notify(struct acpi_device *device, u32 event) acpi_battery_present(battery)); #ifdef CONFIG_ACPI_SYSFS_POWER /* acpi_battery_update could remove power_supply object */ - if (battery->bat.dev) + if (old && battery->bat.dev) power_supply_changed(&battery->bat); #endif } diff --git a/drivers/acpi/blacklist.c b/drivers/acpi/blacklist.c index 01381be05e9..2bb28b9d91c 100644 --- a/drivers/acpi/blacklist.c +++ b/drivers/acpi/blacklist.c @@ -214,7 +214,7 @@ static struct dmi_system_id acpi_osi_dmi_table[] __initdata = { .ident = "Sony VGN-SR290J", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), - DMI_MATCH(DMI_PRODUCT_NAME, "Sony VGN-SR290J"), + DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SR290J"), }, }, { diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index 5f2027d782e..1fa0aafebe2 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -34,8 +34,6 @@ #include <linux/init.h> #include <linux/types.h> #include <linux/delay.h> -#include <linux/proc_fs.h> -#include <linux/seq_file.h> #include <linux/interrupt.h> #include <linux/list.h> #include <linux/spinlock.h> @@ -45,10 +43,13 @@ #include <acpi/acpi_drivers.h> #include <linux/dmi.h> +#include "internal.h" + #define ACPI_EC_CLASS "embedded_controller" #define ACPI_EC_DEVICE_NAME "Embedded Controller" #define ACPI_EC_FILE_INFO "info" +#undef PREFIX #define PREFIX "ACPI: EC: " /* EC status register */ @@ -106,19 +107,8 @@ struct transaction { bool done; }; -static struct acpi_ec { - acpi_handle handle; - unsigned long gpe; - unsigned long command_addr; - unsigned long data_addr; - unsigned long global_lock; - unsigned long flags; - struct mutex lock; - wait_queue_head_t wait; - struct list_head list; - struct transaction *curr; - spinlock_t curr_lock; -} *boot_ec, *first_ec; +struct acpi_ec *boot_ec, *first_ec; +EXPORT_SYMBOL(first_ec); static int EC_FLAGS_MSI; /* Out-of-spec MSI controller */ static int EC_FLAGS_VALIDATE_ECDT; /* ASUStec ECDTs need to be validated */ @@ -679,72 +669,6 @@ acpi_ec_space_handler(u32 function, acpi_physical_address address, } /* -------------------------------------------------------------------------- - FS Interface (/proc) - -------------------------------------------------------------------------- */ - -static struct proc_dir_entry *acpi_ec_dir; - -static int acpi_ec_read_info(struct seq_file *seq, void *offset) -{ - struct acpi_ec *ec = seq->private; - - if (!ec) - goto end; - - seq_printf(seq, "gpe:\t\t\t0x%02x\n", (u32) ec->gpe); - seq_printf(seq, "ports:\t\t\t0x%02x, 0x%02x\n", - (unsigned)ec->command_addr, (unsigned)ec->data_addr); - seq_printf(seq, "use global lock:\t%s\n", - ec->global_lock ? "yes" : "no"); - end: - return 0; -} - -static int acpi_ec_info_open_fs(struct inode *inode, struct file *file) -{ - return single_open(file, acpi_ec_read_info, PDE(inode)->data); -} - -static const struct file_operations acpi_ec_info_ops = { - .open = acpi_ec_info_open_fs, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, - .owner = THIS_MODULE, -}; - -static int acpi_ec_add_fs(struct acpi_device *device) -{ - struct proc_dir_entry *entry = NULL; - - if (!acpi_device_dir(device)) { - acpi_device_dir(device) = proc_mkdir(acpi_device_bid(device), - acpi_ec_dir); - if (!acpi_device_dir(device)) - return -ENODEV; - } - - entry = proc_create_data(ACPI_EC_FILE_INFO, S_IRUGO, - acpi_device_dir(device), - &acpi_ec_info_ops, acpi_driver_data(device)); - if (!entry) - return -ENODEV; - return 0; -} - -static int acpi_ec_remove_fs(struct acpi_device *device) -{ - - if (acpi_device_dir(device)) { - remove_proc_entry(ACPI_EC_FILE_INFO, acpi_device_dir(device)); - remove_proc_entry(acpi_device_bid(device), acpi_ec_dir); - acpi_device_dir(device) = NULL; - } - - return 0; -} - -/* -------------------------------------------------------------------------- Driver Interface -------------------------------------------------------------------------- */ static acpi_status @@ -894,7 +818,12 @@ static int acpi_ec_add(struct acpi_device *device) if (!first_ec) first_ec = ec; device->driver_data = ec; - acpi_ec_add_fs(device); + + WARN(!request_region(ec->data_addr, 1, "EC data"), + "Could not request EC data io port 0x%lx", ec->data_addr); + WARN(!request_region(ec->command_addr, 1, "EC cmd"), + "Could not request EC cmd io port 0x%lx", ec->command_addr); + pr_info(PREFIX "GPE = 0x%lx, I/O: command/status = 0x%lx, data = 0x%lx\n", ec->gpe, ec->command_addr, ec->data_addr); @@ -921,7 +850,8 @@ static int acpi_ec_remove(struct acpi_device *device, int type) kfree(handler); } mutex_unlock(&ec->lock); - acpi_ec_remove_fs(device); + release_region(ec->data_addr, 1); + release_region(ec->command_addr, 1); device->driver_data = NULL; if (ec == first_ec) first_ec = NULL; @@ -1120,16 +1050,10 @@ int __init acpi_ec_init(void) { int result = 0; - acpi_ec_dir = proc_mkdir(ACPI_EC_CLASS, acpi_root_dir); - if (!acpi_ec_dir) - return -ENODEV; - /* Now register the driver for the EC */ result = acpi_bus_register_driver(&acpi_ec_driver); - if (result < 0) { - remove_proc_entry(ACPI_EC_CLASS, acpi_root_dir); + if (result < 0) return -ENODEV; - } return result; } @@ -1140,9 +1064,6 @@ static void __exit acpi_ec_exit(void) { acpi_bus_unregister_driver(&acpi_ec_driver); - - remove_proc_entry(ACPI_EC_CLASS, acpi_root_dir); - return; } #endif /* 0 */ diff --git a/drivers/acpi/ec_sys.c b/drivers/acpi/ec_sys.c new file mode 100644 index 00000000000..0e869b3f81c --- /dev/null +++ b/drivers/acpi/ec_sys.c @@ -0,0 +1,160 @@ +/* + * ec_sys.c + * + * Copyright (C) 2010 SUSE Products GmbH/Novell + * Author: + * Thomas Renninger <trenn@suse.de> + * + * This work is licensed under the terms of the GNU GPL, version 2. + */ + +#include <linux/kernel.h> +#include <linux/acpi.h> +#include <linux/debugfs.h> +#include "internal.h" + +MODULE_AUTHOR("Thomas Renninger <trenn@suse.de>"); +MODULE_DESCRIPTION("ACPI EC sysfs access driver"); +MODULE_LICENSE("GPL"); + +static bool write_support; +module_param(write_support, bool, 0644); +MODULE_PARM_DESC(write_support, "Dangerous, reboot and removal of battery may " + "be needed."); + +#define EC_SPACE_SIZE 256 + +struct sysdev_class acpi_ec_sysdev_class = { + .name = "ec", +}; + +static struct dentry *acpi_ec_debugfs_dir; + +static int acpi_ec_open_io(struct inode *i, struct file *f) +{ + f->private_data = i->i_private; + return 0; +} + +static ssize_t acpi_ec_read_io(struct file *f, char __user *buf, + size_t count, loff_t *off) +{ + /* Use this if support reading/writing multiple ECs exists in ec.c: + * struct acpi_ec *ec = ((struct seq_file *)f->private_data)->private; + */ + unsigned int size = EC_SPACE_SIZE; + u8 *data = (u8 *) buf; + loff_t init_off = *off; + int err = 0; + + if (*off >= size) + return 0; + if (*off + count >= size) { + size -= *off; + count = size; + } else + size = count; + + while (size) { + err = ec_read(*off, &data[*off - init_off]); + if (err) + return err; + *off += 1; + size--; + } + return count; +} + +static ssize_t acpi_ec_write_io(struct file *f, const char __user *buf, + size_t count, loff_t *off) +{ + /* Use this if support reading/writing multiple ECs exists in ec.c: + * struct acpi_ec *ec = ((struct seq_file *)f->private_data)->private; + */ + + unsigned int size = count; + loff_t init_off = *off; + u8 *data = (u8 *) buf; + int err = 0; + + if (*off >= EC_SPACE_SIZE) + return 0; + if (*off + count >= EC_SPACE_SIZE) { + size = EC_SPACE_SIZE - *off; + count = size; + } + + while (size) { + u8 byte_write = data[*off - init_off]; + err = ec_write(*off, byte_write); + if (err) + return err; + + *off += 1; + size--; + } + return count; +} + +static struct file_operations acpi_ec_io_ops = { + .owner = THIS_MODULE, + .open = acpi_ec_open_io, + .read = acpi_ec_read_io, + .write = acpi_ec_write_io, +}; + +int acpi_ec_add_debugfs(struct acpi_ec *ec, unsigned int ec_device_count) +{ + struct dentry *dev_dir; + char name[64]; + mode_t mode = 0400; + + if (ec_device_count == 0) { + acpi_ec_debugfs_dir = debugfs_create_dir("ec", NULL); + if (!acpi_ec_debugfs_dir) + return -ENOMEM; + } + + sprintf(name, "ec%u", ec_device_count); + dev_dir = debugfs_create_dir(name, acpi_ec_debugfs_dir); + if (!dev_dir) { + if (ec_device_count != 0) + goto error; + return -ENOMEM; + } + + if (!debugfs_create_x32("gpe", 0444, dev_dir, (u32 *)&first_ec->gpe)) + goto error; + if (!debugfs_create_bool("use_global_lock", 0444, dev_dir, + (u32 *)&first_ec->global_lock)) + goto error; + + if (write_support) + mode = 0600; + if (!debugfs_create_file("io", mode, dev_dir, ec, &acpi_ec_io_ops)) + goto error; + + return 0; + +error: + debugfs_remove_recursive(acpi_ec_debugfs_dir); + return -ENOMEM; +} + +static int __init acpi_ec_sys_init(void) +{ + int err = 0; + if (first_ec) + err = acpi_ec_add_debugfs(first_ec, 0); + else + err = -ENODEV; + return err; +} + +static void __exit acpi_ec_sys_exit(void) +{ + debugfs_remove_recursive(acpi_ec_debugfs_dir); +} + +module_init(acpi_ec_sys_init); +module_exit(acpi_ec_sys_exit); diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h index f8f190ec066..8ae27264a00 100644 --- a/drivers/acpi/internal.h +++ b/drivers/acpi/internal.h @@ -18,6 +18,11 @@ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. */ +#ifndef _ACPI_INTERNAL_H_ +#define _ACPI_INTERNAL_H_ + +#include <linux/sysdev.h> + #define PREFIX "ACPI: " int init_acpi_device_notify(void); @@ -46,6 +51,23 @@ void acpi_early_processor_set_pdc(void); /* -------------------------------------------------------------------------- Embedded Controller -------------------------------------------------------------------------- */ +struct acpi_ec { + acpi_handle handle; + unsigned long gpe; + unsigned long command_addr; + unsigned long data_addr; + unsigned long global_lock; + unsigned long flags; + struct mutex lock; + wait_queue_head_t wait; + struct list_head list; + struct transaction *curr; + spinlock_t curr_lock; + struct sys_device sysdev; +}; + +extern struct acpi_ec *first_ec; + int acpi_ec_init(void); int acpi_ec_ecdt_probe(void); int acpi_boot_ec_enable(void); @@ -63,3 +85,5 @@ int acpi_sleep_proc_init(void); #else static inline int acpi_sleep_proc_init(void) { return 0; } #endif + +#endif /* _ACPI_INTERNAL_H_ */ diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index 78418ce4fc7..46cce391fa4 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -191,36 +191,11 @@ acpi_status __init acpi_os_initialize(void) return AE_OK; } -static void bind_to_cpu0(struct work_struct *work) -{ - set_cpus_allowed_ptr(current, cpumask_of(0)); - kfree(work); -} - -static void bind_workqueue(struct workqueue_struct *wq) -{ - struct work_struct *work; - - work = kzalloc(sizeof(struct work_struct), GFP_KERNEL); - INIT_WORK(work, bind_to_cpu0); - queue_work(wq, work); -} - acpi_status acpi_os_initialize1(void) { - /* - * On some machines, a software-initiated SMI causes corruption unless - * the SMI runs on CPU 0. An SMI can be initiated by any AML, but - * typically it's done in GPE-related methods that are run via - * workqueues, so we can avoid the known corruption cases by binding - * the workqueues to CPU 0. - */ - kacpid_wq = create_singlethread_workqueue("kacpid"); - bind_workqueue(kacpid_wq); - kacpi_notify_wq = create_singlethread_workqueue("kacpi_notify"); - bind_workqueue(kacpi_notify_wq); - kacpi_hotplug_wq = create_singlethread_workqueue("kacpi_hotplug"); - bind_workqueue(kacpi_hotplug_wq); + kacpid_wq = create_workqueue("kacpid"); + kacpi_notify_wq = create_workqueue("kacpi_notify"); + kacpi_hotplug_wq = create_workqueue("kacpi_hotplug"); BUG_ON(!kacpid_wq); BUG_ON(!kacpi_notify_wq); BUG_ON(!kacpi_hotplug_wq); @@ -766,7 +741,14 @@ static acpi_status __acpi_os_execute(acpi_execute_type type, else INIT_WORK(&dpc->work, acpi_os_execute_deferred); - ret = queue_work(queue, &dpc->work); + /* + * On some machines, a software-initiated SMI causes corruption unless + * the SMI runs on CPU 0. An SMI can be initiated by any AML, but + * typically it's done in GPE-related methods that are run via + * workqueues, so we can avoid the known corruption cases by always + * queueing on CPU 0. + */ + ret = queue_work_on(0, queue, &dpc->work); if (!ret) { printk(KERN_ERR PREFIX diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c index 4eac59393ed..1f67057af2a 100644 --- a/drivers/acpi/pci_root.c +++ b/drivers/acpi/pci_root.c @@ -33,6 +33,7 @@ #include <linux/pm_runtime.h> #include <linux/pci.h> #include <linux/pci-acpi.h> +#include <linux/pci-aspm.h> #include <linux/acpi.h> #include <linux/slab.h> #include <acpi/acpi_bus.h> @@ -543,6 +544,14 @@ static int __devinit acpi_pci_root_add(struct acpi_device *device) if (flags != base_flags) acpi_pci_osc_support(root, flags); + status = acpi_pci_osc_control_set(root->device->handle, + OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL); + + if (ACPI_FAILURE(status)) { + printk(KERN_INFO "Unable to assume PCIe control: Disabling ASPM\n"); + pcie_no_aspm(); + } + pci_acpi_add_bus_pm_notifier(device, root->bus); if (device->wakeup.flags.run_wake) device_set_run_wake(root->bus->bridge, true); diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index 51284351418..e9699aaed10 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -223,7 +223,7 @@ static bool processor_physically_present(acpi_handle handle) type = (acpi_type == ACPI_TYPE_DEVICE) ? 1 : 0; cpuid = acpi_get_cpuid(handle, type, acpi_id); - if (cpuid == -1) + if ((cpuid == -1) && (num_possible_cpus() > 1)) return false; return true; diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index b1b385692f4..b4c2f3bdade 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -76,14 +76,19 @@ static unsigned int max_cstate __read_mostly = ACPI_PROCESSOR_MAX_POWER; module_param(max_cstate, uint, 0000); static unsigned int nocst __read_mostly; module_param(nocst, uint, 0000); +static int bm_check_disable __read_mostly; +module_param(bm_check_disable, uint, 0000); static unsigned int latency_factor __read_mostly = 2; module_param(latency_factor, uint, 0644); +#ifdef CONFIG_ACPI_PROCFS static u64 us_to_pm_timer_ticks(s64 t) { return div64_u64(t * PM_TIMER_FREQUENCY, 1000000); } +#endif + /* * IBM ThinkPad R40e crashes mysteriously when going into C2 or C3. * For now disable this. Probably a bug somewhere else. @@ -159,7 +164,7 @@ static void lapic_timer_check_state(int state, struct acpi_processor *pr, if (cpu_has(&cpu_data(pr->id), X86_FEATURE_ARAT)) return; - if (boot_cpu_has(X86_FEATURE_AMDC1E)) + if (c1e_detected) type = ACPI_STATE_C1; /* @@ -259,7 +264,7 @@ int acpi_processor_resume(struct acpi_device * device) return 0; } -#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86) +#if defined(CONFIG_X86) static void tsc_check_state(int state) { switch (boot_cpu_data.x86_vendor) { @@ -763,6 +768,9 @@ static int acpi_idle_bm_check(void) { u32 bm_status = 0; + if (bm_check_disable) + return 0; + acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_STATUS, &bm_status); if (bm_status) acpi_write_bit_register(ACPI_BITREG_BUS_MASTER_STATUS, 1); @@ -947,7 +955,7 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev, if (acpi_idle_suspend) return(acpi_idle_enter_c1(dev, state)); - if (acpi_idle_bm_check()) { + if (!cx->bm_sts_skip && acpi_idle_bm_check()) { if (dev->safe_state) { dev->last_state = dev->safe_state; return dev->safe_state->enter(dev, dev->safe_state); diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index 5b7c52e4a00..2862c781b37 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -82,6 +82,20 @@ static int acpi_sleep_prepare(u32 acpi_state) static u32 acpi_target_sleep_state = ACPI_STATE_S0; /* + * The ACPI specification wants us to save NVS memory regions during hibernation + * and to restore them during the subsequent resume. Windows does that also for + * suspend to RAM. However, it is known that this mechanism does not work on + * all machines, so we allow the user to disable it with the help of the + * 'acpi_sleep=nonvs' kernel command line option. + */ +static bool nvs_nosave; + +void __init acpi_nvs_nosave(void) +{ + nvs_nosave = true; +} + +/* * ACPI 1.0 wants us to execute _PTS before suspending devices, so we allow the * user to request that behavior by using the 'acpi_old_suspend_ordering' * kernel command line option that causes the following variable to be set. @@ -197,8 +211,7 @@ static int acpi_suspend_begin(suspend_state_t pm_state) u32 acpi_state = acpi_suspend_states[pm_state]; int error = 0; - error = suspend_nvs_alloc(); - + error = nvs_nosave ? 0 : suspend_nvs_alloc(); if (error) return error; @@ -388,20 +401,6 @@ static struct dmi_system_id __initdata acpisleep_dmi_table[] = { #endif /* CONFIG_SUSPEND */ #ifdef CONFIG_HIBERNATION -/* - * The ACPI specification wants us to save NVS memory regions during hibernation - * and to restore them during the subsequent resume. However, it is not certain - * if this mechanism is going to work on all machines, so we allow the user to - * disable this mechanism using the 'acpi_sleep=s4_nonvs' kernel command line - * option. - */ -static bool s4_no_nvs; - -void __init acpi_s4_no_nvs(void) -{ - s4_no_nvs = true; -} - static unsigned long s4_hardware_signature; static struct acpi_table_facs *facs; static bool nosigcheck; @@ -415,7 +414,7 @@ static int acpi_hibernation_begin(void) { int error; - error = s4_no_nvs ? 0 : suspend_nvs_alloc(); + error = nvs_nosave ? 0 : suspend_nvs_alloc(); if (!error) { acpi_target_sleep_state = ACPI_STATE_S4; acpi_sleep_tts_switch(acpi_target_sleep_state); @@ -510,7 +509,7 @@ static int acpi_hibernation_begin_old(void) error = acpi_sleep_prepare(ACPI_STATE_S4); if (!error) { - if (!s4_no_nvs) + if (!nvs_nosave) error = suspend_nvs_alloc(); if (!error) acpi_target_sleep_state = ACPI_STATE_S4; |