diff options
Diffstat (limited to 'drivers/acpi')
| -rw-r--r-- | drivers/acpi/hardware/hwsleep.c | 44 | ||||
| -rw-r--r-- | drivers/acpi/sleep/main.c | 59 |
2 files changed, 76 insertions, 27 deletions
diff --git a/drivers/acpi/hardware/hwsleep.c b/drivers/acpi/hardware/hwsleep.c index dba3cfbe8cb..25dccdf179b 100644 --- a/drivers/acpi/hardware/hwsleep.c +++ b/drivers/acpi/hardware/hwsleep.c @@ -78,19 +78,17 @@ acpi_set_firmware_waking_vector(acpi_physical_address physical_address) return_ACPI_STATUS(status); } - /* Set the vector */ + /* + * According to the ACPI specification 2.0c and later, the 64-bit + * waking vector should be cleared and the 32-bit waking vector should + * be used, unless we want the wake-up code to be called by the BIOS in + * Protected Mode. Some systems (for example HP dv5-1004nr) are known + * to fail to resume if the 64-bit vector is used. + */ + if (facs->version >= 1) + facs->xfirmware_waking_vector = 0; - if ((facs->length < 32) || (!(facs->xfirmware_waking_vector))) { - /* - * ACPI 1.0 FACS or short table or optional X_ field is zero - */ - facs->firmware_waking_vector = (u32) physical_address; - } else { - /* - * ACPI 2.0 FACS with valid X_ field - */ - facs->xfirmware_waking_vector = physical_address; - } + facs->firmware_waking_vector = (u32)physical_address; return_ACPI_STATUS(AE_OK); } @@ -134,20 +132,7 @@ acpi_get_firmware_waking_vector(acpi_physical_address * physical_address) } /* Get the vector */ - - if ((facs->length < 32) || (!(facs->xfirmware_waking_vector))) { - /* - * ACPI 1.0 FACS or short table or optional X_ field is zero - */ - *physical_address = - (acpi_physical_address) facs->firmware_waking_vector; - } else { - /* - * ACPI 2.0 FACS with valid X_ field - */ - *physical_address = - (acpi_physical_address) facs->xfirmware_waking_vector; - } + *physical_address = (acpi_physical_address)facs->firmware_waking_vector; return_ACPI_STATUS(AE_OK); } @@ -627,6 +612,13 @@ acpi_status acpi_leave_sleep_state(u8 sleep_state) } /* TBD: _WAK "sometimes" returns stuff - do we want to look at it? */ + /* + * Some BIOSes assume that WAK_STS will be cleared on resume and use + * it to determine whether the system is rebooting or resuming. Clear + * it for compatibility. + */ + acpi_set_register(ACPI_BITREG_WAKE_STATUS, 1); + acpi_gbl_system_awake_and_running = TRUE; /* Enable power button */ diff --git a/drivers/acpi/sleep/main.c b/drivers/acpi/sleep/main.c index 4c21480b582..cc344d4252c 100644 --- a/drivers/acpi/sleep/main.c +++ b/drivers/acpi/sleep/main.c @@ -15,6 +15,7 @@ #include <linux/dmi.h> #include <linux/device.h> #include <linux/suspend.h> +#include <linux/reboot.h> #include <asm/io.h> @@ -25,6 +26,36 @@ u8 sleep_states[ACPI_S_STATE_COUNT]; static u32 acpi_target_sleep_state = ACPI_STATE_S0; +static void acpi_sleep_tts_switch(u32 acpi_state) +{ + union acpi_object in_arg = { ACPI_TYPE_INTEGER }; + struct acpi_object_list arg_list = { 1, &in_arg }; + acpi_status status = AE_OK; + + in_arg.integer.value = acpi_state; + status = acpi_evaluate_object(NULL, "\\_TTS", &arg_list, NULL); + if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { + /* + * OS can't evaluate the _TTS object correctly. Some warning + * message will be printed. But it won't break anything. + */ + printk(KERN_NOTICE "Failure in evaluating _TTS object\n"); + } +} + +static int tts_notify_reboot(struct notifier_block *this, + unsigned long code, void *x) +{ + acpi_sleep_tts_switch(ACPI_STATE_S5); + return NOTIFY_DONE; +} + +static struct notifier_block tts_notifier = { + .notifier_call = tts_notify_reboot, + .next = NULL, + .priority = 0, +}; + static int acpi_sleep_prepare(u32 acpi_state) { #ifdef CONFIG_ACPI_SLEEP @@ -130,6 +161,7 @@ static void acpi_pm_end(void) * failing transition to a sleep state. */ acpi_target_sleep_state = ACPI_STATE_S0; + acpi_sleep_tts_switch(acpi_target_sleep_state); } #endif /* CONFIG_ACPI_SLEEP */ @@ -154,6 +186,7 @@ static int acpi_suspend_begin(suspend_state_t pm_state) if (sleep_states[acpi_state]) { acpi_target_sleep_state = acpi_state; + acpi_sleep_tts_switch(acpi_target_sleep_state); } else { printk(KERN_ERR "ACPI does not support this state: %d\n", pm_state); @@ -199,6 +232,8 @@ static int acpi_suspend_enter(suspend_state_t pm_state) break; } + /* If ACPI is not enabled by the BIOS, we need to enable it here. */ + acpi_enable(); /* Reprogram control registers and execute _BFS */ acpi_leave_sleep_state_prep(acpi_state); @@ -295,6 +330,14 @@ static struct dmi_system_id __initdata acpisleep_dmi_table[] = { DMI_MATCH(DMI_BOARD_NAME, "KN9 Series(NF-CK804)"), }, }, + { + .callback = init_old_suspend_ordering, + .ident = "HP xw4600 Workstation", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP xw4600 Workstation"), + }, + }, {}, }; #endif /* CONFIG_SUSPEND */ @@ -312,6 +355,7 @@ void __init acpi_no_s4_hw_signature(void) static int acpi_hibernation_begin(void) { acpi_target_sleep_state = ACPI_STATE_S4; + acpi_sleep_tts_switch(acpi_target_sleep_state); return 0; } @@ -375,7 +419,15 @@ static struct platform_hibernation_ops acpi_hibernation_ops = { */ static int acpi_hibernation_begin_old(void) { - int error = acpi_sleep_prepare(ACPI_STATE_S4); + int error; + /* + * The _TTS object should always be evaluated before the _PTS object. + * When the old_suspended_ordering is true, the _PTS object is + * evaluated in the acpi_sleep_prepare. + */ + acpi_sleep_tts_switch(ACPI_STATE_S4); + + error = acpi_sleep_prepare(ACPI_STATE_S4); if (!error) acpi_target_sleep_state = ACPI_STATE_S4; @@ -595,5 +647,10 @@ int __init acpi_sleep_init(void) pm_power_off = acpi_power_off; } printk(")\n"); + /* + * Register the tts_notifier to reboot notifier list so that the _TTS + * object can also be evaluated when the system enters S5. + */ + register_reboot_notifier(&tts_notifier); return 0; } |