diff options
Diffstat (limited to 'drivers/ata/ata_piix.c')
-rw-r--r-- | drivers/ata/ata_piix.c | 186 |
1 files changed, 55 insertions, 131 deletions
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index b1d08a8f500..e9e32ed6b1a 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -165,8 +165,10 @@ static void piix_set_dmamode(struct ata_port *ap, struct ata_device *adev); static void ich_set_dmamode(struct ata_port *ap, struct ata_device *adev); static int ich_pata_cable_detect(struct ata_port *ap); static u8 piix_vmw_bmdma_status(struct ata_port *ap); -static int piix_sidpr_scr_read(struct ata_port *ap, unsigned int reg, u32 *val); -static int piix_sidpr_scr_write(struct ata_port *ap, unsigned int reg, u32 val); +static int piix_sidpr_scr_read(struct ata_link *link, + unsigned int reg, u32 *val); +static int piix_sidpr_scr_write(struct ata_link *link, + unsigned int reg, u32 val); #ifdef CONFIG_PM static int piix_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg); static int piix_pci_device_resume(struct pci_dev *pdev); @@ -278,12 +280,15 @@ static const struct pci_device_id piix_pci_tbl[] = { /* SATA Controller IDE (PCH) */ { 0x8086, 0x3b20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata }, /* SATA Controller IDE (PCH) */ + { 0x8086, 0x3b21, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, + /* SATA Controller IDE (PCH) */ { 0x8086, 0x3b26, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, /* SATA Controller IDE (PCH) */ + { 0x8086, 0x3b28, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata }, + /* SATA Controller IDE (PCH) */ { 0x8086, 0x3b2d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, /* SATA Controller IDE (PCH) */ { 0x8086, 0x3b2e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata }, - { } /* terminate list */ }; @@ -582,6 +587,7 @@ static const struct ich_laptop ich_laptop[] = { { 0x27DF, 0x1025, 0x0110 }, /* ICH7 on Acer 3682WLMi */ { 0x27DF, 0x1043, 0x1267 }, /* ICH7 on Asus W5F */ { 0x27DF, 0x103C, 0x30A1 }, /* ICH7 on HP Compaq nc2400 */ + { 0x27DF, 0x1071, 0xD221 }, /* ICH7 on Hercules EC-900 */ { 0x24CA, 0x1025, 0x0061 }, /* ICH4 on ACER Aspire 2023WLMi */ { 0x24CA, 0x1025, 0x003d }, /* ICH4 on ACER TM290 */ { 0x266F, 0x1025, 0x0066 }, /* ICH6 on ACER Aspire 1694WLMi */ @@ -885,23 +891,9 @@ static void ich_set_dmamode(struct ata_port *ap, struct ata_device *adev) * Serial ATA Index/Data Pair Superset Registers access * * Beginning from ICH8, there's a sane way to access SCRs using index - * and data register pair located at BAR5. This creates an - * interesting problem of mapping two SCRs to one port. - * - * Although they have separate SCRs, the master and slave aren't - * independent enough to be treated as separate links - e.g. softreset - * resets both. Also, there's no protocol defined for hard resetting - * singled device sharing the virtual port (no defined way to acquire - * device signature). This is worked around by merging the SCR values - * into one sensible value and requesting follow-up SRST after - * hardreset. - * - * SCR merging is perfomed in nibbles which is the unit contents in - * SCRs are organized. If two values are equal, the value is used. - * When they differ, merge table which lists precedence of possible - * values is consulted and the first match or the last entry when - * nothing matches is used. When there's no merge table for the - * specific nibble, value from the first port is used. + * and data register pair located at BAR5 which means that we have + * separate SCRs for master and slave. This is handled using libata + * slave_link facility. */ static const int piix_sidx_map[] = { [SCR_STATUS] = 0, @@ -909,120 +901,38 @@ static const int piix_sidx_map[] = { [SCR_CONTROL] = 1, }; -static void piix_sidpr_sel(struct ata_device *dev, unsigned int reg) +static void piix_sidpr_sel(struct ata_link *link, unsigned int reg) { - struct ata_port *ap = dev->link->ap; + struct ata_port *ap = link->ap; struct piix_host_priv *hpriv = ap->host->private_data; - iowrite32(((ap->port_no * 2 + dev->devno) << 8) | piix_sidx_map[reg], + iowrite32(((ap->port_no * 2 + link->pmp) << 8) | piix_sidx_map[reg], hpriv->sidpr + PIIX_SIDPR_IDX); } -static int piix_sidpr_read(struct ata_device *dev, unsigned int reg) -{ - struct piix_host_priv *hpriv = dev->link->ap->host->private_data; - - piix_sidpr_sel(dev, reg); - return ioread32(hpriv->sidpr + PIIX_SIDPR_DATA); -} - -static void piix_sidpr_write(struct ata_device *dev, unsigned int reg, u32 val) -{ - struct piix_host_priv *hpriv = dev->link->ap->host->private_data; - - piix_sidpr_sel(dev, reg); - iowrite32(val, hpriv->sidpr + PIIX_SIDPR_DATA); -} - -static u32 piix_merge_scr(u32 val0, u32 val1, const int * const *merge_tbl) -{ - u32 val = 0; - int i, mi; - - for (i = 0, mi = 0; i < 32 / 4; i++) { - u8 c0 = (val0 >> (i * 4)) & 0xf; - u8 c1 = (val1 >> (i * 4)) & 0xf; - u8 merged = c0; - const int *cur; - - /* if no merge preference, assume the first value */ - cur = merge_tbl[mi]; - if (!cur) - goto done; - mi++; - - /* if two values equal, use it */ - if (c0 == c1) - goto done; - - /* choose the first match or the last from the merge table */ - while (*cur != -1) { - if (c0 == *cur || c1 == *cur) - break; - cur++; - } - if (*cur == -1) - cur--; - merged = *cur; - done: - val |= merged << (i * 4); - } - - return val; -} - -static int piix_sidpr_scr_read(struct ata_port *ap, unsigned int reg, u32 *val) +static int piix_sidpr_scr_read(struct ata_link *link, + unsigned int reg, u32 *val) { - const int * const sstatus_merge_tbl[] = { - /* DET */ (const int []){ 1, 3, 0, 4, 3, -1 }, - /* SPD */ (const int []){ 2, 1, 0, -1 }, - /* IPM */ (const int []){ 6, 2, 1, 0, -1 }, - NULL, - }; - const int * const scontrol_merge_tbl[] = { - /* DET */ (const int []){ 1, 0, 4, 0, -1 }, - /* SPD */ (const int []){ 0, 2, 1, 0, -1 }, - /* IPM */ (const int []){ 0, 1, 2, 3, 0, -1 }, - NULL, - }; - u32 v0, v1; + struct piix_host_priv *hpriv = link->ap->host->private_data; if (reg >= ARRAY_SIZE(piix_sidx_map)) return -EINVAL; - if (!(ap->flags & ATA_FLAG_SLAVE_POSS)) { - *val = piix_sidpr_read(&ap->link.device[0], reg); - return 0; - } - - v0 = piix_sidpr_read(&ap->link.device[0], reg); - v1 = piix_sidpr_read(&ap->link.device[1], reg); - - switch (reg) { - case SCR_STATUS: - *val = piix_merge_scr(v0, v1, sstatus_merge_tbl); - break; - case SCR_ERROR: - *val = v0 | v1; - break; - case SCR_CONTROL: - *val = piix_merge_scr(v0, v1, scontrol_merge_tbl); - break; - } - + piix_sidpr_sel(link, reg); + *val = ioread32(hpriv->sidpr + PIIX_SIDPR_DATA); return 0; } -static int piix_sidpr_scr_write(struct ata_port *ap, unsigned int reg, u32 val) +static int piix_sidpr_scr_write(struct ata_link *link, + unsigned int reg, u32 val) { + struct piix_host_priv *hpriv = link->ap->host->private_data; + if (reg >= ARRAY_SIZE(piix_sidx_map)) return -EINVAL; - piix_sidpr_write(&ap->link.device[0], reg, val); - - if (ap->flags & ATA_FLAG_SLAVE_POSS) - piix_sidpr_write(&ap->link.device[1], reg, val); - + piix_sidpr_sel(link, reg); + iowrite32(val, hpriv->sidpr + PIIX_SIDPR_DATA); return 0; } @@ -1363,28 +1273,28 @@ static const int *__devinit piix_init_sata_map(struct pci_dev *pdev, return map; } -static void __devinit piix_init_sidpr(struct ata_host *host) +static int __devinit piix_init_sidpr(struct ata_host *host) { struct pci_dev *pdev = to_pci_dev(host->dev); struct piix_host_priv *hpriv = host->private_data; - struct ata_device *dev0 = &host->ports[0]->link.device[0]; + struct ata_link *link0 = &host->ports[0]->link; u32 scontrol; - int i; + int i, rc; /* check for availability */ for (i = 0; i < 4; i++) if (hpriv->map[i] == IDE) - return; + return 0; if (!(host->ports[0]->flags & PIIX_FLAG_SIDPR)) - return; + return 0; if (pci_resource_start(pdev, PIIX_SIDPR_BAR) == 0 || pci_resource_len(pdev, PIIX_SIDPR_BAR) != PIIX_SIDPR_LEN) - return; + return 0; if (pcim_iomap_regions(pdev, 1 << PIIX_SIDPR_BAR, DRV_NAME)) - return; + return 0; hpriv->sidpr = pcim_iomap_table(pdev)[PIIX_SIDPR_BAR]; @@ -1392,7 +1302,7 @@ static void __devinit piix_init_sidpr(struct ata_host *host) * Give it a test drive by inhibiting power save modes which * we'll do anyway. */ - scontrol = piix_sidpr_read(dev0, SCR_CONTROL); + piix_sidpr_scr_read(link0, SCR_CONTROL, &scontrol); /* if IPM is already 3, SCR access is probably working. Don't * un-inhibit power save modes as BIOS might have inhibited @@ -1400,18 +1310,30 @@ static void __devinit piix_init_sidpr(struct ata_host *host) */ if ((scontrol & 0xf00) != 0x300) { scontrol |= 0x300; - piix_sidpr_write(dev0, SCR_CONTROL, scontrol); - scontrol = piix_sidpr_read(dev0, SCR_CONTROL); + piix_sidpr_scr_write(link0, SCR_CONTROL, scontrol); + piix_sidpr_scr_read(link0, SCR_CONTROL, &scontrol); if ((scontrol & 0xf00) != 0x300) { dev_printk(KERN_INFO, host->dev, "SCR access via " "SIDPR is available but doesn't work\n"); - return; + return 0; } } - host->ports[0]->ops = &piix_sidpr_sata_ops; - host->ports[1]->ops = &piix_sidpr_sata_ops; + /* okay, SCRs available, set ops and ask libata for slave_link */ + for (i = 0; i < 2; i++) { + struct ata_port *ap = host->ports[i]; + + ap->ops = &piix_sidpr_sata_ops; + + if (ap->flags & ATA_FLAG_SLAVE_POSS) { + rc = ata_slave_link_init(ap); + if (rc) + return rc; + } + } + + return 0; } static void piix_iocfg_bit18_quirk(struct pci_dev *pdev) @@ -1499,7 +1421,7 @@ static int __devinit piix_init_one(struct pci_dev *pdev, * off. */ if (pdev->vendor == PCI_VENDOR_ID_INTEL && pdev->device == 0x2652) { - int rc = piix_disable_ahci(pdev); + rc = piix_disable_ahci(pdev); if (rc) return rc; } @@ -1521,7 +1443,9 @@ static int __devinit piix_init_one(struct pci_dev *pdev, /* initialize controller */ if (port_flags & ATA_FLAG_SATA) { piix_init_pcs(host, piix_map_db_table[ent->driver_data]); - piix_init_sidpr(host); + rc = piix_init_sidpr(host); + if (rc) + return rc; } /* apply IOCFG bit18 quirk */ |