1 files changed, 31 insertions, 185 deletions

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 49cffb6094a..c47373f01f8 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -65,6 +65,7 @@
 #include <linux/libata.h>
 #include <asm/byteorder.h>
 #include <linux/cdrom.h>
+#include <linux/ratelimit.h>
 
 #include "libata.h"
 
@@ -96,7 +97,6 @@ static void ata_dev_xfermask(struct ata_device *dev);
 static unsigned long ata_dev_blacklisted(const struct ata_device *dev);
 
 unsigned int ata_print_id = 1;
-static struct workqueue_struct *ata_wq;
 
 struct workqueue_struct *ata_aux_wq;
 
@@ -1685,52 +1685,6 @@ unsigned long ata_id_xfermask(const u16 *id)
 	return ata_pack_xfermask(pio_mask, mwdma_mask, udma_mask);
 }
 
-/**
- *	ata_pio_queue_task - Queue port_task
- *	@ap: The ata_port to queue port_task for
- *	@data: data for @fn to use
- *	@delay: delay time in msecs for workqueue function
- *
- *	Schedule @fn(@data) for execution after @delay jiffies using
- *	port_task.  There is one port_task per port and it's the
- *	user(low level driver)'s responsibility to make sure that only
- *	one task is active at any given time.
- *
- *	libata core layer takes care of synchronization between
- *	port_task and EH.  ata_pio_queue_task() may be ignored for EH
- *	synchronization.
- *
- *	LOCKING:
- *	Inherited from caller.
- */
-void ata_pio_queue_task(struct ata_port *ap, void *data, unsigned long delay)
-{
-	ap->port_task_data = data;
-
-	/* may fail if ata_port_flush_task() in progress */
-	queue_delayed_work(ata_wq, &ap->port_task, msecs_to_jiffies(delay));
-}
-
-/**
- *	ata_port_flush_task - Flush port_task
- *	@ap: The ata_port to flush port_task for
- *
- *	After this function completes, port_task is guranteed not to
- *	be running or scheduled.
- *
- *	LOCKING:
- *	Kernel thread context (may sleep)
- */
-void ata_port_flush_task(struct ata_port *ap)
-{
-	DPRINTK("ENTER\n");
-
-	cancel_rearming_delayed_work(&ap->port_task);
-
-	if (ata_msg_ctl(ap))
-		ata_port_printk(ap, KERN_DEBUG, "%s: EXIT\n", __func__);
-}
-
 static void ata_qc_complete_internal(struct ata_queued_cmd *qc)
 {
 	struct completion *waiting = qc->private_data;
@@ -1852,7 +1806,7 @@ unsigned ata_exec_internal_sg(struct ata_device *dev,
 
 	rc = wait_for_completion_timeout(&wait, msecs_to_jiffies(timeout));
 
-	ata_port_flush_task(ap);
+	ata_sff_flush_pio_task(ap);
 
 	if (!rc) {
 		spin_lock_irqsave(ap->lock, flags);
@@ -1906,22 +1860,6 @@ unsigned ata_exec_internal_sg(struct ata_device *dev,
 	ap->qc_active = preempted_qc_active;
 	ap->nr_active_links = preempted_nr_active_links;
 
-	/* XXX - Some LLDDs (sata_mv) disable port on command failure.
-	 * Until those drivers are fixed, we detect the condition
-	 * here, fail the command with AC_ERR_SYSTEM and reenable the
-	 * port.
-	 *
-	 * Note that this doesn't change any behavior as internal
-	 * command failure results in disabling the device in the
-	 * higher layer for LLDDs without new reset/EH callbacks.
-	 *
-	 * Kill the following code as soon as those drivers are fixed.
-	 */
-	if (ap->flags & ATA_FLAG_DISABLED) {
-		err_mask |= AC_ERR_SYSTEM;
-		ata_port_probe(ap);
-	}
-
 	spin_unlock_irqrestore(ap->lock, flags);
 
 	if ((err_mask & AC_ERR_TIMEOUT) && auto_timeout)
@@ -2767,8 +2705,6 @@ int ata_bus_probe(struct ata_port *ap)
 	int rc;
 	struct ata_device *dev;
 
-	ata_port_probe(ap);
-
 	ata_for_each_dev(dev, &ap->link, ALL)
 		tries[dev->devno] = ATA_PROBE_MAX_TRIES;
 
@@ -2796,8 +2732,7 @@ int ata_bus_probe(struct ata_port *ap)
 	ap->ops->phy_reset(ap);
 
 	ata_for_each_dev(dev, &ap->link, ALL) {
-		if (!(ap->flags & ATA_FLAG_DISABLED) &&
-		    dev->class != ATA_DEV_UNKNOWN)
+		if (dev->class != ATA_DEV_UNKNOWN)
 			classes[dev->devno] = dev->class;
 		else
 			classes[dev->devno] = ATA_DEV_NONE;
@@ -2805,8 +2740,6 @@ int ata_bus_probe(struct ata_port *ap)
 		dev->class = ATA_DEV_UNKNOWN;
 	}
 
-	ata_port_probe(ap);
-
 	/* read IDENTIFY page and configure devices. We have to do the identify
 	   specific sequence bass-ackwards so that PDIAG- is released by
 	   the slave device */
@@ -2856,8 +2789,6 @@ int ata_bus_probe(struct ata_port *ap)
 	ata_for_each_dev(dev, &ap->link, ENABLED)
 		return 0;
 
-	/* no device present, disable port */
-	ata_port_disable(ap);
 	return -ENODEV;
 
  fail:
@@ -2889,22 +2820,6 @@ int ata_bus_probe(struct ata_port *ap)
 }
 
 /**
- *	ata_port_probe - Mark port as enabled
- *	@ap: Port for which we indicate enablement
- *
- *	Modify @ap data structure such that the system
- *	thinks that the entire port is enabled.
- *
- *	LOCKING: host lock, or some other form of
- *	serialization.
- */
-
-void ata_port_probe(struct ata_port *ap)
-{
-	ap->flags &= ~ATA_FLAG_DISABLED;
-}
-
-/**
  *	sata_print_link_status - Print SATA link status
  *	@link: SATA link to printk link status about
  *
@@ -2951,26 +2866,6 @@ struct ata_device *ata_dev_pair(struct ata_device *adev)
 }
 
 /**
- *	ata_port_disable - Disable port.
- *	@ap: Port to be disabled.
- *
- *	Modify @ap data structure such that the system
- *	thinks that the entire port is disabled, and should
- *	never attempt to probe or communicate with devices
- *	on this port.
- *
- *	LOCKING: host lock, or some other form of
- *	serialization.
- */
-
-void ata_port_disable(struct ata_port *ap)
-{
-	ap->link.device[0].class = ATA_DEV_NONE;
-	ap->link.device[1].class = ATA_DEV_NONE;
-	ap->flags |= ATA_FLAG_DISABLED;
-}
-
-/**
  *	sata_down_spd_limit - adjust SATA spd limit downward
  *	@link: Link to adjust SATA spd limit for
  *	@spd_limit: Additional limit
@@ -3631,9 +3526,15 @@ int ata_wait_ready(struct ata_link *link, unsigned long deadline,
 		   int (*check_ready)(struct ata_link *link))
 {
 	unsigned long start = jiffies;
-	unsigned long nodev_deadline = ata_deadline(start, ATA_TMOUT_FF_WAIT);
+	unsigned long nodev_deadline;
 	int warned = 0;
 
+	/* choose which 0xff timeout to use, read comment in libata.h */
+	if (link->ap->host->flags & ATA_HOST_PARALLEL_SCAN)
+		nodev_deadline = ata_deadline(start, ATA_TMOUT_FF_WAIT_LONG);
+	else
+		nodev_deadline = ata_deadline(start, ATA_TMOUT_FF_WAIT);
+
 	/* Slave readiness can't be tested separately from master.  On
 	 * M/S emulation configuration, this function should be called
 	 * only on the master and it will handle both master and slave.
@@ -3651,12 +3552,12 @@ int ata_wait_ready(struct ata_link *link, unsigned long deadline,
 		if (ready > 0)
 			return 0;
 
-		/* -ENODEV could be transient.  Ignore -ENODEV if link
+		/*
+		 * -ENODEV could be transient.  Ignore -ENODEV if link
 		 * is online.  Also, some SATA devices take a long
-		 * time to clear 0xff after reset.  For example,
-		 * HHD424020F7SV00 iVDR needs >= 800ms while Quantum
-		 * GoVault needs even more than that.  Wait for
-		 * ATA_TMOUT_FF_WAIT on -ENODEV if link isn't offline.
+		 * time to clear 0xff after reset.  Wait for
+		 * ATA_TMOUT_FF_WAIT[_LONG] on -ENODEV if link isn't
+		 * offline.
 		 *
 		 * Note that some PATA controllers (pata_ali) explode
 		 * if status register is read more than once when
@@ -5558,30 +5459,6 @@ void ata_host_resume(struct ata_host *host)
 #endif
 
 /**
- *	ata_port_start - Set port up for dma.
- *	@ap: Port to initialize
- *
- *	Called just after data structures for each port are
- *	initialized.  Allocates space for PRD table.
- *
- *	May be used as the port_start() entry in ata_port_operations.
- *
- *	LOCKING:
- *	Inherited from caller.
- */
-int ata_port_start(struct ata_port *ap)
-{
-	struct device *dev = ap->dev;
-
-	ap->prd = dmam_alloc_coherent(dev, ATA_PRD_TBL_SZ, &ap->prd_dma,
-				      GFP_KERNEL);
-	if (!ap->prd)
-		return -ENOMEM;
-
-	return 0;
-}
-
-/**
  *	ata_dev_init - Initialize an ata_device structure
  *	@dev: Device structure to initialize
  *
@@ -5709,12 +5586,9 @@ struct ata_port *ata_port_alloc(struct ata_host *host)
 
 	ap->pflags |= ATA_PFLAG_INITIALIZING;
 	ap->lock = &host->lock;
-	ap->flags = ATA_FLAG_DISABLED;
 	ap->print_id = -1;
-	ap->ctl = ATA_DEVCTL_OBS;
 	ap->host = host;
 	ap->dev = host->dev;
-	ap->last_ctl = 0xFF;
 
 #if defined(ATA_VERBOSE_DEBUG)
 	/* turn on all debugging levels */
@@ -5725,11 +5599,6 @@ struct ata_port *ata_port_alloc(struct ata_host *host)
 	ap->msg_enable = ATA_MSG_DRV | ATA_MSG_ERR | ATA_MSG_WARN;
 #endif
 
-#ifdef CONFIG_ATA_SFF
-	INIT_DELAYED_WORK(&ap->port_task, ata_pio_task);
-#else
-	INIT_DELAYED_WORK(&ap->port_task, NULL);
-#endif
 	INIT_DELAYED_WORK(&ap->hotplug_task, ata_scsi_hotplug);
 	INIT_WORK(&ap->scsi_rescan_task, ata_scsi_dev_rescan);
 	INIT_LIST_HEAD(&ap->eh_done_q);
@@ -5747,6 +5616,8 @@ struct ata_port *ata_port_alloc(struct ata_host *host)
 	ap->stats.unhandled_irq = 1;
 	ap->stats.idle_irq = 1;
 #endif
+	ata_sff_port_init(ap);
+
 	return ap;
 }
 
@@ -6138,8 +6009,6 @@ static void async_port_probe(void *data, async_cookie_t cookie)
 		struct ata_eh_info *ehi = &ap->link.eh_info;
 		unsigned long flags;
 
-		ata_port_probe(ap);
-
 		/* kick EH for boot probing */
 		spin_lock_irqsave(ap->lock, flags);
 
@@ -6663,62 +6532,43 @@ static void __init ata_parse_force_param(void)
 
 static int __init ata_init(void)
 {
-	ata_parse_force_param();
+	int rc = -ENOMEM;
 
-	/*
-	 * FIXME: In UP case, there is only one workqueue thread and if you
-	 * have more than one PIO device, latency is bloody awful, with
-	 * occasional multi-second "hiccups" as one PIO device waits for
-	 * another.  It's an ugly wart that users DO occasionally complain
-	 * about; luckily most users have at most one PIO polled device.
-	 */
-	ata_wq = create_workqueue("ata");
-	if (!ata_wq)
-		goto free_force_tbl;
+	ata_parse_force_param();
 
 	ata_aux_wq = create_singlethread_workqueue("ata_aux");
 	if (!ata_aux_wq)
-		goto free_wq;
+		goto fail;
+
+	rc = ata_sff_init();
+	if (rc)
+		goto fail;
 
 	printk(KERN_DEBUG "libata version " DRV_VERSION " loaded.\n");
 	return 0;
 
-free_wq:
-	destroy_workqueue(ata_wq);
-free_force_tbl:
+fail:
 	kfree(ata_force_tbl);
-	return -ENOMEM;
+	if (ata_aux_wq)
+		destroy_workqueue(ata_aux_wq);
+	return rc;
 }
 
 static void __exit ata_exit(void)
 {
+	ata_sff_exit();
 	kfree(ata_force_tbl);
-	destroy_workqueue(ata_wq);
 	destroy_workqueue(ata_aux_wq);
 }
 
 subsys_initcall(ata_init);
 module_exit(ata_exit);
 
-static unsigned long ratelimit_time;
-static DEFINE_SPINLOCK(ata_ratelimit_lock);
+static DEFINE_RATELIMIT_STATE(ratelimit, HZ / 5, 1);
 
 int ata_ratelimit(void)
 {
-	int rc;
-	unsigned long flags;
-
-	spin_lock_irqsave(&ata_ratelimit_lock, flags);
-
-	if (time_after(jiffies, ratelimit_time)) {
-		rc = 1;
-		ratelimit_time = jiffies + (HZ/5);
-	} else
-		rc = 0;
-
-	spin_unlock_irqrestore(&ata_ratelimit_lock, flags);
-
-	return rc;
+	return __ratelimit(&ratelimit);
 }
 
 /**
@@ -6826,11 +6676,9 @@ EXPORT_SYMBOL_GPL(ata_xfer_mode2mask);
 EXPORT_SYMBOL_GPL(ata_xfer_mode2shift);
 EXPORT_SYMBOL_GPL(ata_mode_string);
 EXPORT_SYMBOL_GPL(ata_id_xfermask);
-EXPORT_SYMBOL_GPL(ata_port_start);
 EXPORT_SYMBOL_GPL(ata_do_set_mode);
 EXPORT_SYMBOL_GPL(ata_std_qc_defer);
 EXPORT_SYMBOL_GPL(ata_noop_qc_prep);
-EXPORT_SYMBOL_GPL(ata_port_probe);
 EXPORT_SYMBOL_GPL(ata_dev_disable);
 EXPORT_SYMBOL_GPL(sata_set_spd);
 EXPORT_SYMBOL_GPL(ata_wait_after_reset);
@@ -6842,7 +6690,6 @@ EXPORT_SYMBOL_GPL(sata_std_hardreset);
 EXPORT_SYMBOL_GPL(ata_std_postreset);
 EXPORT_SYMBOL_GPL(ata_dev_classify);
 EXPORT_SYMBOL_GPL(ata_dev_pair);
-EXPORT_SYMBOL_GPL(ata_port_disable);
 EXPORT_SYMBOL_GPL(ata_ratelimit);
 EXPORT_SYMBOL_GPL(ata_wait_register);
 EXPORT_SYMBOL_GPL(ata_scsi_queuecmd);
@@ -6864,7 +6711,6 @@ EXPORT_SYMBOL_GPL(ata_id_c_string);
 EXPORT_SYMBOL_GPL(ata_do_dev_read_id);
 EXPORT_SYMBOL_GPL(ata_scsi_simulate);
 
-EXPORT_SYMBOL_GPL(ata_pio_queue_task);
 EXPORT_SYMBOL_GPL(ata_pio_need_iordy);
 EXPORT_SYMBOL_GPL(ata_timing_find_mode);
 EXPORT_SYMBOL_GPL(ata_timing_compute);