diff options
Diffstat (limited to 'drivers/ata/libata-core.c')
| -rw-r--r-- | drivers/ata/libata-core.c | 2234 |
1 files changed, 296 insertions, 1938 deletions
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index be95fdb6972..51b7d2fad36 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -46,7 +46,6 @@ #include <linux/init.h> #include <linux/list.h> #include <linux/mm.h> -#include <linux/highmem.h> #include <linux/spinlock.h> #include <linux/blkdev.h> #include <linux/delay.h> @@ -62,7 +61,6 @@ #include <scsi/scsi_cmnd.h> #include <scsi/scsi_host.h> #include <linux/libata.h> -#include <asm/semaphore.h> #include <asm/byteorder.h> #include <linux/cdrom.h> @@ -74,6 +72,19 @@ const unsigned long sata_deb_timing_normal[] = { 5, 100, 2000 }; const unsigned long sata_deb_timing_hotplug[] = { 25, 500, 2000 }; const unsigned long sata_deb_timing_long[] = { 100, 2000, 5000 }; +const struct ata_port_operations ata_base_port_ops = { + .prereset = ata_std_prereset, + .postreset = ata_std_postreset, + .error_handler = ata_std_error_handler, +}; + +const struct ata_port_operations sata_port_ops = { + .inherits = &ata_base_port_ops, + + .qc_defer = ata_std_qc_defer, + .hardreset = sata_std_hardreset, +}; + static unsigned int ata_dev_init_params(struct ata_device *dev, u16 heads, u16 sectors); static unsigned int ata_dev_set_xfermode(struct ata_device *dev); @@ -1043,50 +1054,6 @@ static void ata_lpm_disable(struct ata_host *host) } #endif /* CONFIG_PM */ - -/** - * ata_devchk - PATA device presence detection - * @ap: ATA channel to examine - * @device: Device to examine (starting at zero) - * - * This technique was originally described in - * Hale Landis's ATADRVR (www.ata-atapi.com), and - * later found its way into the ATA/ATAPI spec. - * - * Write a pattern to the ATA shadow registers, - * and if a device is present, it will respond by - * correctly storing and echoing back the - * ATA shadow register contents. - * - * LOCKING: - * caller. - */ - -static unsigned int ata_devchk(struct ata_port *ap, unsigned int device) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - u8 nsect, lbal; - - ap->ops->dev_select(ap, device); - - iowrite8(0x55, ioaddr->nsect_addr); - iowrite8(0xaa, ioaddr->lbal_addr); - - iowrite8(0xaa, ioaddr->nsect_addr); - iowrite8(0x55, ioaddr->lbal_addr); - - iowrite8(0x55, ioaddr->nsect_addr); - iowrite8(0xaa, ioaddr->lbal_addr); - - nsect = ioread8(ioaddr->nsect_addr); - lbal = ioread8(ioaddr->lbal_addr); - - if ((nsect == 0x55) && (lbal == 0xaa)) - return 1; /* we found a device */ - - return 0; /* nothing found */ -} - /** * ata_dev_classify - determine device type based on ATA-spec signature * @tf: ATA taskfile register set for device to be identified @@ -1147,75 +1114,6 @@ unsigned int ata_dev_classify(const struct ata_taskfile *tf) } /** - * ata_dev_try_classify - Parse returned ATA device signature - * @dev: ATA device to classify (starting at zero) - * @present: device seems present - * @r_err: Value of error register on completion - * - * After an event -- SRST, E.D.D., or SATA COMRESET -- occurs, - * an ATA/ATAPI-defined set of values is placed in the ATA - * shadow registers, indicating the results of device detection - * and diagnostics. - * - * Select the ATA device, and read the values from the ATA shadow - * registers. Then parse according to the Error register value, - * and the spec-defined values examined by ata_dev_classify(). - * - * LOCKING: - * caller. - * - * RETURNS: - * Device type - %ATA_DEV_ATA, %ATA_DEV_ATAPI or %ATA_DEV_NONE. - */ -unsigned int ata_dev_try_classify(struct ata_device *dev, int present, - u8 *r_err) -{ - struct ata_port *ap = dev->link->ap; - struct ata_taskfile tf; - unsigned int class; - u8 err; - - ap->ops->dev_select(ap, dev->devno); - - memset(&tf, 0, sizeof(tf)); - - ap->ops->tf_read(ap, &tf); - err = tf.feature; - if (r_err) - *r_err = err; - - /* see if device passed diags: continue and warn later */ - if (err == 0) - /* diagnostic fail : do nothing _YET_ */ - dev->horkage |= ATA_HORKAGE_DIAGNOSTIC; - else if (err == 1) - /* do nothing */ ; - else if ((dev->devno == 0) && (err == 0x81)) - /* do nothing */ ; - else - return ATA_DEV_NONE; - - /* determine if device is ATA or ATAPI */ - class = ata_dev_classify(&tf); - - if (class == ATA_DEV_UNKNOWN) { - /* If the device failed diagnostic, it's likely to - * have reported incorrect device signature too. - * Assume ATA device if the device seems present but - * device signature is invalid with diagnostic - * failure. - */ - if (present && (dev->horkage & ATA_HORKAGE_DIAGNOSTIC)) - class = ATA_DEV_ATA; - else - class = ATA_DEV_NONE; - } else if ((class == ATA_DEV_ATA) && (ata_chk_status(ap) == 0)) - class = ATA_DEV_NONE; - - return class; -} - -/** * ata_id_string - Convert IDENTIFY DEVICE page into string * @id: IDENTIFY DEVICE results we will examine * @s: string into which data is output @@ -1293,7 +1191,7 @@ static u64 ata_id_n_sectors(const u16 *id) } } -static u64 ata_tf_to_lba48(struct ata_taskfile *tf) +u64 ata_tf_to_lba48(const struct ata_taskfile *tf) { u64 sectors = 0; @@ -1304,10 +1202,10 @@ static u64 ata_tf_to_lba48(struct ata_taskfile *tf) sectors |= (tf->lbam & 0xff) << 8; sectors |= (tf->lbal & 0xff); - return ++sectors; + return sectors; } -static u64 ata_tf_to_lba(struct ata_taskfile *tf) +u64 ata_tf_to_lba(const struct ata_taskfile *tf) { u64 sectors = 0; @@ -1316,7 +1214,7 @@ static u64 ata_tf_to_lba(struct ata_taskfile *tf) sectors |= (tf->lbam & 0xff) << 8; sectors |= (tf->lbal & 0xff); - return ++sectors; + return sectors; } /** @@ -1361,9 +1259,9 @@ static int ata_read_native_max_address(struct ata_device *dev, u64 *max_sectors) } if (lba48) - *max_sectors = ata_tf_to_lba48(&tf); + *max_sectors = ata_tf_to_lba48(&tf) + 1; else - *max_sectors = ata_tf_to_lba(&tf); + *max_sectors = ata_tf_to_lba(&tf) + 1; if (dev->horkage & ATA_HORKAGE_HPA_SIZE) (*max_sectors)--; return 0; @@ -1523,89 +1421,6 @@ static int ata_hpa_resize(struct ata_device *dev) } /** - * ata_noop_dev_select - Select device 0/1 on ATA bus - * @ap: ATA channel to manipulate - * @device: ATA device (numbered from zero) to select - * - * This function performs no actual function. - * - * May be used as the dev_select() entry in ata_port_operations. - * - * LOCKING: - * caller. - */ -void ata_noop_dev_select(struct ata_port *ap, unsigned int device) -{ -} - - -/** - * ata_std_dev_select - Select device 0/1 on ATA bus - * @ap: ATA channel to manipulate - * @device: ATA device (numbered from zero) to select - * - * Use the method defined in the ATA specification to - * make either device 0, or device 1, active on the - * ATA channel. Works with both PIO and MMIO. - * - * May be used as the dev_select() entry in ata_port_operations. - * - * LOCKING: - * caller. - */ - -void ata_std_dev_select(struct ata_port *ap, unsigned int device) -{ - u8 tmp; - - if (device == 0) - tmp = ATA_DEVICE_OBS; - else - tmp = ATA_DEVICE_OBS | ATA_DEV1; - - iowrite8(tmp, ap->ioaddr.device_addr); - ata_pause(ap); /* needed; also flushes, for mmio */ -} - -/** - * ata_dev_select - Select device 0/1 on ATA bus - * @ap: ATA channel to manipulate - * @device: ATA device (numbered from zero) to select - * @wait: non-zero to wait for Status register BSY bit to clear - * @can_sleep: non-zero if context allows sleeping - * - * Use the method defined in the ATA specification to - * make either device 0, or device 1, active on the - * ATA channel. - * - * This is a high-level version of ata_std_dev_select(), - * which additionally provides the services of inserting - * the proper pauses and status polling, where needed. - * - * LOCKING: - * caller. - */ - -void ata_dev_select(struct ata_port *ap, unsigned int device, - unsigned int wait, unsigned int can_sleep) -{ - if (ata_msg_probe(ap)) - ata_port_printk(ap, KERN_INFO, "ata_dev_select: ENTER, " - "device %u, wait %u\n", device, wait); - - if (wait) - ata_wait_idle(ap); - - ap->ops->dev_select(ap, device); - - if (wait) { - if (can_sleep && ap->link.device[device].class == ATA_DEV_ATAPI) - msleep(150); - ata_wait_idle(ap); - } -} - -/** * ata_dump_id - IDENTIFY DEVICE info debugging output * @id: IDENTIFY DEVICE page to dump * @@ -1732,8 +1547,7 @@ unsigned long ata_id_xfermask(const u16 *id) * LOCKING: * Inherited from caller. */ -static void ata_pio_queue_task(struct ata_port *ap, void *data, - unsigned long delay) +void ata_pio_queue_task(struct ata_port *ap, void *data, unsigned long delay) { ap->port_task_data = data; @@ -2097,7 +1911,6 @@ int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class, if (ata_msg_ctl(ap)) ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER\n", __func__); - ata_dev_select(ap, dev->devno, 1, 1); /* select device 0/1 */ retry: ata_tf_init(dev, &tf); @@ -2464,7 +2277,7 @@ int ata_dev_configure(struct ata_device *dev) * changed notifications and ATAPI ANs. */ if ((ap->flags & ATA_FLAG_AN) && ata_id_has_atapi_AN(id) && - (!ap->nr_pmp_links || + (!sata_pmp_attached(ap) || sata_scr_read(&ap->link, SCR_NOTIFICATION, &sntf) == 0)) { unsigned int err_mask; @@ -2558,9 +2371,6 @@ int ata_dev_configure(struct ata_device *dev) } } - if (ata_msg_probe(ap)) - ata_dev_printk(dev, KERN_DEBUG, "%s: EXIT, drv_stat = 0x%x\n", - __func__, ata_chk_status(ap)); return 0; err_out_nosup: @@ -2806,7 +2616,7 @@ void ata_port_probe(struct ata_port *ap) * LOCKING: * None. */ -void sata_print_link_status(struct ata_link *link) +static void sata_print_link_status(struct ata_link *link) { u32 sstatus, scontrol, tmp; @@ -2962,7 +2772,7 @@ static int __sata_set_spd_needed(struct ata_link *link, u32 *scontrol) * RETURNS: * 1 if SATA spd configuration is needed, 0 otherwise. */ -int sata_set_spd_needed(struct ata_link *link) +static int sata_set_spd_needed(struct ata_link *link) { u32 scontrol; @@ -3321,16 +3131,21 @@ static int ata_dev_set_mode(struct ata_device *dev) if (rc) return rc; - /* Old CFA may refuse this command, which is just fine */ - if (dev->xfer_shift == ATA_SHIFT_PIO && ata_id_is_cfa(dev->id)) - ign_dev_err = 1; - - /* Some very old devices and some bad newer ones fail any kind of - SET_XFERMODE request but support PIO0-2 timings and no IORDY */ - if (dev->xfer_shift == ATA_SHIFT_PIO && !ata_id_has_iordy(dev->id) && - dev->pio_mode <= XFER_PIO_2) - ign_dev_err = 1; - + if (dev->xfer_shift == ATA_SHIFT_PIO) { + /* Old CFA may refuse this command, which is just fine */ + if (ata_id_is_cfa(dev->id)) + ign_dev_err = 1; + /* Catch several broken garbage emulations plus some pre + ATA devices */ + if (ata_id_major_version(dev->id) == 0 && + dev->pio_mode <= XFER_PIO_2) + ign_dev_err = 1; + /* Some very old devices and some bad newer ones fail + any kind of SET_XFERMODE request but support PIO0-2 + timings and no IORDY */ + if (!ata_id_has_iordy(dev->id) && dev->pio_mode <= XFER_PIO_2) + ign_dev_err = 1; + } /* Early MWDMA devices do DMA but don't allow DMA mode setting. Don't fail an MWDMA0 set IFF the device indicates it is in MWDMA0 */ if (dev->xfer_shift == ATA_SHIFT_MWDMA && @@ -3474,170 +3289,73 @@ int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev) } /** - * ata_tf_to_host - issue ATA taskfile to host controller - * @ap: port to which command is being issued - * @tf: ATA taskfile register set - * - * Issues ATA taskfile register set to ATA host controller, - * with proper synchronization with interrupt handler and - * other threads. - * - * LOCKING: - * spin_lock_irqsave(host lock) - */ - -static inline void ata_tf_to_host(struct ata_port *ap, - const struct ata_taskfile *tf) -{ - ap->ops->tf_load(ap, tf); - ap->ops->exec_command(ap, tf); -} - -/** - * ata_busy_sleep - sleep until BSY clears, or timeout - * @ap: port containing status register to be polled - * @tmout_pat: impatience timeout - * @tmout: overall timeout - * - * Sleep until ATA Status register bit BSY clears, - * or a timeout occurs. - * - * LOCKING: - * Kernel thread context (may sleep). - * - * RETURNS: - * 0 on success, -errno otherwise. - */ -int ata_busy_sleep(struct ata_port *ap, - unsigned long tmout_pat, unsigned long tmout) -{ - unsigned long timer_start, timeout; - u8 status; - - status = ata_busy_wait(ap, ATA_BUSY, 300); - timer_start = jiffies; - timeout = timer_start + tmout_pat; - while (status != 0xff && (status & ATA_BUSY) && - time_before(jiffies, timeout)) { - msleep(50); - status = ata_busy_wait(ap, ATA_BUSY, 3); - } - - if (status != 0xff && (status & ATA_BUSY)) - ata_port_printk(ap, KERN_WARNING, - "port is slow to respond, please be patient " - "(Status 0x%x)\n", status); - - timeout = timer_start + tmout; - while (status != 0xff && (status & ATA_BUSY) && - time_before(jiffies, timeout)) { - msleep(50); - status = ata_chk_status(ap); - } - - if (status == 0xff) - return -ENODEV; - - if (status & ATA_BUSY) { - ata_port_printk(ap, KERN_ERR, "port failed to respond " - "(%lu secs, Status 0x%x)\n", - tmout / HZ, status); - return -EBUSY; - } - - return 0; -} - -/** - * ata_wait_after_reset - wait before checking status after reset - * @ap: port containing status register to be polled + * ata_wait_ready - wait for link to become ready + * @link: link to be waited on * @deadline: deadline jiffies for the operation + * @check_ready: callback to check link readiness * - * After reset, we need to pause a while before reading status. - * Also, certain combination of controller and device report 0xff - * for some duration (e.g. until SATA PHY is up and running) - * which is interpreted as empty port in ATA world. This - * function also waits for such devices to get out of 0xff - * status. + * Wait for @link to become ready. @check_ready should return + * positive number if @link is ready, 0 if it isn't, -ENODEV if + * link doesn't seem to be occupied, other errno for other error + * conditions. * - * LOCKING: - * Kernel thread context (may sleep). - */ -void ata_wait_after_reset(struct ata_port *ap, unsigned long deadline) -{ - unsigned long until = jiffies + ATA_TMOUT_FF_WAIT; - - if (time_before(until, deadline)) - deadline = until; - - /* Spec mandates ">= 2ms" before checking status. We wait - * 150ms, because that was the magic delay used for ATAPI - * devices in Hale Landis's ATADRVR, for the period of time - * between when the ATA command register is written, and then - * status is checked. Because waiting for "a while" before - * checking status is fine, post SRST, we perform this magic - * delay here as well. - * - * Old drivers/ide uses the 2mS rule and then waits for ready. - */ - msleep(150); - - /* Wait for 0xff to clear. Some SATA devices take a long time - * to clear 0xff after reset. For example, HHD424020F7SV00 - * iVDR needs >= 800ms while. Quantum GoVault needs even more - * than that. - * - * Note that some PATA controllers (pata_ali) explode if - * status register is read more than once when there's no - * device attached. - */ - if (ap->flags & ATA_FLAG_SATA) { - while (1) { - u8 status = ata_chk_status(ap); - - if (status != 0xff || time_after(jiffies, deadline)) - return; - - msleep(50); - } - } -} - -/** - * ata_wait_ready - sleep until BSY clears, or timeout - * @ap: port containing status register to be polled - * @deadline: deadline jiffies for the operation - * - * Sleep until ATA Status register bit BSY clears, or timeout - * occurs. + * Transient -ENODEV conditions are allowed for + * ATA_TMOUT_FF_WAIT. * * LOCKING: - * Kernel thread context (may sleep). + * EH context. * * RETURNS: - * 0 on success, -errno otherwise. + * 0 if @linke is ready before @deadline; otherwise, -errno. */ -int ata_wait_ready(struct ata_port *ap, unsigned long deadline) +int ata_wait_ready(struct ata_link *link, unsigned long deadline, + int (*check_ready)(struct ata_link *link)) { unsigned long start = jiffies; + unsigned long nodev_deadline = start + ATA_TMOUT_FF_WAIT; int warned = 0; + if (time_after(nodev_deadline, deadline)) + nodev_deadline = deadline; + while (1) { - u8 status = ata_chk_status(ap); unsigned long now = jiffies; + int ready, tmp; - if (!(status & ATA_BUSY)) + ready = tmp = check_ready(link); + if (ready > 0) return 0; - if (!ata_link_online(&ap->link) && status == 0xff) - return -ENODEV; + + /* -ENODEV could be transient. Ignore -ENODEV if link + * is online. Also, some SATA devices take a long + * time to clear 0xff after reset. For example, + * HHD424020F7SV00 iVDR needs >= 800ms while Quantum + * GoVault needs even more than that. Wait for + * ATA_TMOUT_FF_WAIT on -ENODEV if link isn't offline. + * + * Note that some PATA controllers (pata_ali) explode + * if status register is read more than once when + * there's no device attached. + */ + if (ready == -ENODEV) { + if (ata_link_online(link)) + ready = 0; + else if ((link->ap->flags & ATA_FLAG_SATA) && + !ata_link_offline(link) && + time_before(now, nodev_deadline)) + ready = 0; + } + + if (ready) + return ready; if (time_after(now, deadline)) return -EBUSY; if (!warned && time_after(now, start + 5 * HZ) && (deadline - now > 3 * HZ)) { - ata_port_printk(ap, KERN_WARNING, - "port is slow to respond, please be patient " - "(Status 0x%x)\n", status); + ata_link_printk(link, KERN_WARNING, + "link is slow to respond, please be patient " + "(ready=%d)\n", tmp); warned = 1; } @@ -3645,179 +3363,26 @@ int ata_wait_ready(struct ata_port *ap, unsigned long deadline) } } -static int ata_bus_post_reset(struct ata_port *ap, unsigned int devmask, - unsigned long deadline) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - unsigned int dev0 = devmask & (1 << 0); - unsigned int dev1 = devmask & (1 << 1); - int rc, ret = 0; - - /* if device 0 was found in ata_devchk, wait for its - * BSY bit to clear - */ - if (dev0) { - rc = ata_wait_ready(ap, deadline); - if (rc) { - if (rc != -ENODEV) - return rc; - ret = rc; - } - } - - /* if device 1 was found in ata_devchk, wait for register - * access briefly, then wait for BSY to clear. - */ - if (dev1) { - int i; - - ap->ops->dev_select(ap, 1); - - /* Wait for register access. Some ATAPI devices fail - * to set nsect/lbal after reset, so don't waste too - * much time on it. We're gonna wait for !BSY anyway. - */ - for (i = 0; i < 2; i++) { - u8 nsect, lbal; - - nsect = ioread8(ioaddr->nsect_addr); - lbal = ioread8(ioaddr->lbal_addr); - if ((nsect == 1) && (lbal == 1)) - break; - msleep(50); /* give drive a breather */ - } - - rc = ata_wait_ready(ap, deadline); - if (rc) { - if (rc != -ENODEV) - return rc; - ret = rc; - } - } - - /* is all this really necessary? */ - ap->ops->dev_select(ap, 0); - if (dev1) - ap->ops->dev_select(ap, 1); - if (dev0) - ap->ops->dev_select(ap, 0); - - return ret; -} - -static int ata_bus_softreset(struct ata_port *ap, unsigned int devmask, - unsigned long deadline) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - - DPRINTK("ata%u: bus reset via SRST\n", ap->print_id); - - /* software reset. causes dev0 to be selected */ - iowrite8(ap->ctl, ioaddr->ctl_addr); - udelay(20); /* FIXME: flush */ - iowrite8(ap->ctl | ATA_SRST, ioaddr->ctl_addr); - udelay(20); /* FIXME: flush */ - iowrite8(ap->ctl, ioaddr->ctl_addr); - - /* wait a while before checking status */ - ata_wait_after_reset(ap, deadline); - - /* Before we perform post reset processing we want to see if - * the bus shows 0xFF because the odd clown forgets the D7 - * pulldown resistor. - */ - if (ata_chk_status(ap) == 0xFF) - return -ENODEV; - - return ata_bus_post_reset(ap, devmask, deadline); -} - /** - * ata_bus_reset - reset host port and associated ATA channel - * @ap: port to reset + * ata_wait_after_reset - wait for link to become ready after reset + * @link: link to be waited on + * @deadline: deadline jiffies for the operation + * @check_ready: callback to check link readiness * - * This is typically the first time we actually start issuing - * commands to the ATA channel. We wait for BSY to clear, then - * issue EXECUTE DEVICE DIAGNOSTIC command, polling for its - * result. Determine what devices, if any, are on the channel - * by looking at the device 0/1 error register. Look at the signature - * stored in each device's taskfile registers, to determine if - * the device is ATA or ATAPI. + * Wait for @link to become ready after reset. * * LOCKING: - * PCI/etc. bus probe sem. - * Obtains host lock. + * EH context. * - * SIDE EFFECTS: - * Sets ATA_FLAG_DISABLED if bus reset fails. + * RETURNS: + * 0 if @linke is ready before @deadline; otherwise, -errno. */ - -void ata_bus_reset(struct ata_port *ap) +int ata_wait_after_reset(struct ata_link *link, unsigned long deadline, + int (*check_ready)(struct ata_link *link)) { - struct ata_device *device = ap->link.device; - struct ata_ioports *ioaddr = &ap->ioaddr; - unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS; - u8 err; - unsigned int dev0, dev1 = 0, devmask = 0; - int rc; - - DPRINTK("ENTER, host %u, port %u\n", ap->print_id, ap->port_no); - - /* determine if device 0/1 are present */ - if (ap->flags & ATA_FLAG_SATA_RESET) - dev0 = 1; - else { - dev0 = ata_devchk(ap, 0); - if (slave_possible) - dev1 = ata_devchk(ap, 1); - } - - if (dev0) - devmask |= (1 << 0); - if (dev1) - devmask |= (1 << 1); + msleep(ATA_WAIT_AFTER_RESET_MSECS); - /* select device 0 again */ - ap->ops->dev_select(ap, 0); - - /* issue bus reset */ - if (ap->flags & ATA_FLAG_SRST) { - rc = ata_bus_softreset(ap, devmask, jiffies + 40 * HZ); - if (rc && rc != -ENODEV) - goto err_out; - } - - /* - * determine by signature whether we have ATA or ATAPI devices - */ - device[0].class = ata_dev_try_classify(&device[0], dev0, &err); - if ((slave_possible) && (err != 0x81)) - device[1].class = ata_dev_try_classify(&device[1], dev1, &err); - - /* is double-select really necessary? */ - if (device[1].class != ATA_DEV_NONE) - ap->ops->dev_select(ap, 1); - if (device[0].class != ATA_DEV_NONE) - ap->ops->dev_select(ap, 0); - - /* if no devices were detected, disable this port */ - if ((device[0].class == ATA_DEV_NONE) && - (device[1].class == ATA_DEV_NONE)) - goto err_out; - - if (ap->flags & (ATA_FLAG_SATA_RESET | ATA_FLAG_SRST)) { - /* set up device control for ATA_FLAG_SATA_RESET */ - iowrite8(ap->ctl, ioaddr->ctl_addr); - } - - DPRINTK("EXIT\n"); - return; - -err_out: - ata_port_printk(ap, KERN_ERR, "disabling port\n"); - ata_port_disable(ap); - - DPRINTK("EXIT\n"); + return ata_wait_ready(link, deadline, check_ready); } /** @@ -3906,7 +3471,7 @@ int sata_link_debounce(struct ata_link *link, const unsigned long *params, int sata_link_resume(struct ata_link *link, const unsigned long *params, unsigned long deadline) { - u32 scontrol; + u32 scontrol, serror; int rc; if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol))) @@ -3922,7 +3487,25 @@ int sata_link_resume(struct ata_link *link, const unsigned long *params, */ msleep(200); - return sata_link_debounce(link, params, deadline); + if ((rc = sata_link_debounce(link, params, deadline))) + return rc; + + /* Clear SError. PMP and some host PHYs require this to + * operate and clearing should be done before checking PHY + * online status to avoid race condition (hotplugging between + * link resume and status check). + */ + if (!(rc = sata_scr_read(link, SCR_ERROR, &serror))) + rc = sata_scr_write(link, SCR_ERROR, serror); + if (rc == 0 || rc == -EINVAL) { + unsigned long flags; + + spin_lock_irqsave(link->ap->lock, flags); + link->eh_info.serror = 0; + spin_unlock_irqrestore(link->ap->lock, flags); + rc = 0; + } + return rc; } /** @@ -3949,17 +3532,6 @@ int ata_std_prereset(struct ata_link *link, unsigned long deadline) const unsigned long *timing = sata_ehc_deb_timing(ehc); int rc; - /* handle link resume */ - if ((ehc->i.flags & ATA_EHI_RESUME_LINK) && - (link->flags & ATA_LFLAG_HRST_TO_RESUME)) - ehc->i.action |= ATA_EH_HARDRESET; - - /* Some PMPs don't work with only SRST, force hardreset if PMP - * is supported. - */ - if (ap->flags & ATA_FLAG_PMP) - ehc->i.action |= ATA_EH_HARDRESET; - /* if we're about to do hardreset, nothing more to do */ if (ehc->i.action & ATA_EH_HARDRESET) return 0; @@ -3973,88 +3545,30 @@ int ata_std_prereset(struct ata_link *link, unsigned long deadline) "link for reset (errno=%d)\n", rc); } - /* Wait for !BSY if the controller can wait for the first D2H - * Reg FIS and we don't know that no device is attached. - */ - if (!(link->flags & ATA_LFLAG_SKIP_D2H_BSY) && !ata_link_offline(link)) { - rc = ata_wait_ready(ap, deadline); - if (rc && rc != -ENODEV) { - ata_link_printk(link, KERN_WARNING, "device not ready " - "(errno=%d), forcing hardreset\n", rc); - ehc->i.action |= ATA_EH_HARDRESET; - } - } + /* no point in trying softreset on offline link */ + if (ata_link_offline(link)) + ehc->i.action &= ~ATA_EH_SOFTRESET; return 0; } /** - * ata_std_softreset - reset host port via ATA SRST - * @link: ATA link to reset - * @classes: resulting classes of attached devices - * @deadline: deadline jiffies for the operation - * - * Reset host port using ATA SRST. - * - * LOCKING: - * Kernel thread context (may sleep) - * - * RETURNS: - * 0 on success, -errno otherwise. - */ -int ata_std_softreset(struct ata_link *link, unsigned int *classes, - unsigned long deadline) -{ - struct ata_port *ap = link->ap; - unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS; - unsigned int devmask = 0; - int rc; - u8 err; - - DPRINTK("ENTER\n"); - - if (ata_link_offline(link)) { - classes[0] = ATA_DEV_NONE; - goto out; - } - - /* determine if device 0/1 are present */ - if (ata_devchk(ap, 0)) - devmask |= (1 << 0); - if (slave_possible && ata_devchk(ap, 1)) - devmask |= (1 << 1); - - /* select device 0 again */ - ap->ops->dev_select(ap, 0); - - /* issue bus reset */ - DPRINTK("about to softreset, devmask=%x\n", devmask); - rc = ata_bus_softreset(ap, devmask, deadline); - /* if link is occupied, -ENODEV too is an error */ - if (rc && (rc != -ENODEV || sata_scr_valid(link))) { - ata_link_printk(link, KERN_ERR, "SRST failed (errno=%d)\n", rc); - return rc; - } - - /* determine by signature whether we have ATA or ATAPI devices */ - classes[0] = ata_dev_try_classify(&link->device[0], - devmask & (1 << 0), &err); - if (slave_possible && err != 0x81) - classes[1] = ata_dev_try_classify(&link->device[1], - devmask & (1 << 1), &err); - - out: - DPRINTK("EXIT, classes[0]=%u [1]=%u\n", classes[0], classes[1]); - return 0; -} - -/** * sata_link_hardreset - reset link via SATA phy reset * @link: link to reset * @timing: timing parameters { interval, duratinon, timeout } in msec * @deadline: deadline jiffies for the operation + * @online: optional out parameter indicating link onlineness + * @check_ready: optional callback to check link readiness * * SATA phy-reset @link using DET bits of SControl register. + * After hardreset, link readiness is waited upon using + * ata_wait_ready() if @check_ready is specified. LLDs are + * allowed to not specify @check_ready and wait itself after this + * function returns. Device classification is LLD's + * responsibility. + * + * *@online is set to one iff reset succeeded and @link is online + * after reset. * * LOCKING: * Kernel thread context (may sleep) @@ -4063,13 +3577,17 @@ int ata_std_softreset(struct ata_link *link, unsigned int *classes, * 0 on success, -errno otherwise. */ int sata_link_hardreset(struct ata_link *link, const unsigned long *timing, - unsigned long deadline) + unsigned long deadline, + bool *online, int (*check_ready)(struct ata_link *)) { u32 scontrol; int rc; DPRINTK("ENTER\n"); + if (online) + *online = false; + if (sata_set_spd_needed(link)) { /* SATA spec says nothing about how to reconfigure * spd. To be on the safe side, turn off phy during @@ -4103,77 +3621,69 @@ int sata_link_hardreset(struct ata_link *link, const unsigned long *timing, /* bring link back */ rc = sata_link_resume(link, timing, deadline); + if (rc) + goto out; + /* if link is offline nothing more to do */ + if (ata_link_offline(link)) + goto out; + + /* Link is online. From this point, -ENODEV too is an error. */ + if (online) + *online = true; + + if (sata_pmp_supported(link->ap) && ata_is_host_link(link)) { + /* If PMP is supported, we have to do follow-up SRST. + * Some PMPs don't send D2H Reg FIS after hardreset if + * the first port is empty. Wait only for + * ATA_TMOUT_PMP_SRST_WAIT. + */ + if (check_ready) { + unsigned long pmp_deadline; + + pmp_deadline = jiffies + ATA_TMOUT_PMP_SRST_WAIT; + if (time_after(pmp_deadline, deadline)) + pmp_deadline = deadline; + ata_wait_ready(link, pmp_deadline, check_ready); + } + rc = -EAGAIN; + goto out; + } + + rc = 0; + if (check_ready) + rc = ata_wait_ready(link, deadline, check_ready); out: + if (rc && rc != -EAGAIN) + ata_link_printk(link, KERN_ERR, + "COMRESET failed (errno=%d)\n", rc); DPRINTK("EXIT, rc=%d\n", rc); return rc; } /** - * sata_std_hardreset - reset host port via SATA phy reset + * sata_std_hardreset - COMRESET w/o waiting or classification * @link: link to reset * @class: resulting class of attached device * @deadline: deadline jiffies for the operation * - * SATA phy-reset host port using DET bits of SControl register, - * wait for !BSY and classify the attached device. + * Standard SATA COMRESET w/o waiting or classification. * * LOCKING: * Kernel thread context (may sleep) * * RETURNS: - * 0 on success, -errno otherwise. + * 0 if link offline, -EAGAIN if link online, -errno on errors. */ int sata_std_hardreset(struct ata_link *link, unsigned int *class, unsigned long deadline) { - struct ata_port *ap = link->ap; const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context); + bool online; int rc; - DPRINTK("ENTER\n"); - /* do hardreset */ - rc = sata_link_hardreset(link, timing, deadline); - if (rc) { - ata_link_printk(link, KERN_ERR, - "COMRESET failed (errno=%d)\n", rc); - return rc; - } - - /* TODO: phy layer with polling, timeouts, etc. */ - if (ata_link_offline(link)) { - *class = ATA_DEV_NONE; - DPRINTK("EXIT, link offline\n"); - return 0; - } - - /* wait a while before checking status */ - ata_wait_after_reset(ap, deadline); - - /* If PMP is supported, we have to do follow-up SRST. Note - * that some PMPs don't send D2H Reg FIS after hardreset at - * all if the first port is empty. Wait for it just for a - * second and request follow-up SRST. - */ - if (ap->flags & ATA_FLAG_PMP) { - ata_wait_ready(ap, jiffies + HZ); - return -EAGAIN; - } - - rc = ata_wait_ready(ap, deadline); - /* link occupied, -ENODEV too is an error */ - if (rc) { - ata_link_printk(link, KERN_ERR, - "COMRESET failed (errno=%d)\n", rc); - return rc; - } - - ap->ops->dev_select(ap, 0); /* probably unnecessary */ - - *class = ata_dev_try_classify(link->device, 1, NULL); - - DPRINTK("EXIT, class=%u\n", *class); - return 0; + rc = sata_link_hardreset(link, timing, deadline, &online, NULL); + return online ? -EAGAIN : rc; } /** @@ -4190,35 +3700,11 @@ int sata_std_hardreset(struct ata_link *link, unsigned int *class, */ void ata_std_postreset(struct ata_link *link, unsigned int *classes) { - struct ata_port *ap = link->ap; - u32 serror; - DPRINTK("ENTER\n"); /* print link status */ sata_print_link_status(link); - /* clear SError */ - if (sata_scr_read(link, SCR_ERROR, &serror) == 0) - sata_scr_write(link, SCR_ERROR, serror); - link->eh_info.serror = 0; - - /* is double-select really necessary? */ - if (classes[0] != ATA_DEV_NONE) - ap->ops->dev_select(ap, 1); - if (classes[1] != ATA_DEV_NONE) - ap->ops->dev_select(ap, 0); - - /* bail out if no device is present */ - if (classes[0] == ATA_DEV_NONE && classes[1] == ATA_DEV_NONE) { - DPRINTK("EXIT, no device\n"); - return; - } - - /* set up device control */ - if (ap->ioaddr.ctl_addr) - iowrite8(ap->ctl, ap->ioaddr.ctl_addr); - DPRINTK("EXIT\n"); } @@ -4528,6 +4014,53 @@ static int ata_is_40wire(struct ata_device *dev) } /** + * cable_is_40wire - 40/80/SATA decider + * @ap: port to consider + * + * This function encapsulates the policy for speed management + * in one place. At the moment we don't cache the result but + * there is a good case for setting ap->cbl to the result when + * we are called with unknown cables (and figuring out if it + * impacts hotplug at all). + * + * Return 1 if the cable appears to be 40 wire. + */ + +static int cable_is_40wire(struct ata_port *ap) +{ + struct ata_link *link; + struct ata_device *dev; + + /* If the controller thinks we are 40 wire, we are */ + if (ap->cbl == ATA_CBL_PATA40) + return 1; + /* If the controller thinks we are 80 wire, we are */ + if (ap->cbl == ATA_CBL_PATA80 || ap->cbl == ATA_CBL_SATA) + return 0; + /* If the system is known to be 40 wire short cable (eg laptop), + then we allow 80 wire modes even if the drive isn't sure */ + if (ap->cbl == ATA_CBL_PATA40_SHORT) + return 0; + /* If the controller doesn't know we scan + + - Note: We look for all 40 wire detects at this point. + Any 80 wire detect is taken to be 80 wire cable + because + - In many setups only the one drive (slave if present) + will give a valid detect + - If you have a non detect capable drive you don't + want it to colour the choice + */ + ata_port_for_each_link(link, ap) { + ata_link_for_each_dev(dev, link) { + if (!ata_is_40wire(dev)) + return 0; + } + } + return 1; +} + +/** * ata_dev_xfermask - Compute supported xfermask of the given device * @dev: Device to compute xfermask for * @@ -4595,10 +4128,7 @@ static void ata_dev_xfermask(struct ata_device *dev) */ if (xfer_mask & (0xF8 << ATA_SHIFT_UDMA)) /* UDMA/44 or higher would be available */ - if ((ap->cbl == ATA_CBL_PATA40) || - (ata_is_40wire(dev) && - (ap->cbl == ATA_CBL_PATA_UNK || - ap->cbl == ATA_CBL_PATA80))) { + if (cable_is_40wire(ap)) { ata_dev_printk(dev, KERN_WARNING, "limited to UDMA/33 due to 40-wire cable\n"); xfer_mask &= ~(0xF8 << ATA_SHIFT_UDMA); @@ -4759,112 +4289,6 @@ void ata_sg_clean(struct ata_queued_cmd *qc) } /** - * ata_fill_sg - Fill PCI IDE PRD table - * @qc: Metadata associated with taskfile to be transferred - * - * Fill PCI IDE PRD (scatter-gather) table with segments - * associated with the current disk command. - * - * LOCKING: - * spin_lock_irqsave(host lock) - * - */ -static void ata_fill_sg(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - struct scatterlist *sg; - unsigned int si, pi; - - pi = 0; - for_each_sg(qc->sg, sg, qc->n_elem, si) { - u32 addr, offset; - u32 sg_len, len; - - /* determine if physical DMA addr spans 64K boundary. - * Note h/w doesn't support 64-bit, so we unconditionally - * truncate dma_addr_t to u32. - */ - addr = (u32) sg_dma_address(sg); - sg_len = sg_dma_len(sg); - - while (sg_len) { - offset = addr & 0xffff; - len = sg_len; - if ((offset + sg_len) > 0x10000) - len = 0x10000 - offset; - - ap->prd[pi].addr = cpu_to_le32(addr); - ap->prd[pi].flags_len = cpu_to_le32(len & 0xffff); - VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", pi, addr, len); - - pi++; - sg_len -= len; - addr += len; - } - } - - ap->prd[pi - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT); -} - -/** - * ata_fill_sg_dumb - Fill PCI IDE PRD table - * @qc: Metadata associated with taskfile to be transferred - * - * Fill PCI IDE PRD (scatter-gather) table with segments - * associated with the current disk command. Perform the fill - * so that we avoid writing any length 64K records for - * controllers that don't follow the spec. - * - * LOCKING: - * spin_lock_irqsave(host lock) - * - */ -static void ata_fill_sg_dumb(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - struct scatterlist *sg; - unsigned int si, pi; - - pi = 0; - for_each_sg(qc->sg, sg, qc->n_elem, si) { - u32 addr, offset; - u32 sg_len, len, blen; - - /* determine if physical DMA addr spans 64K boundary. - * Note h/w doesn't support 64-bit, so we unconditionally - * truncate dma_addr_t to u32. - */ - addr = (u32) sg_dma_address(sg); - sg_len = sg_dma_len(sg); - - while (sg_len) { - offset = addr & 0xffff; - len = sg_len; - if ((offset + sg_len) > 0x10000) - len = 0x10000 - offset; - - blen = len & 0xffff; - ap->prd[pi].addr = cpu_to_le32(addr); - if (blen == 0) { - /* Some PATA chipsets like the CS5530 can't - cope with 0x0000 meaning 64K as the spec says */ - ap->prd[pi].flags_len = cpu_to_le32(0x8000); - blen = 0x8000; - ap->prd[++pi].addr = cpu_to_le32(addr + 0x8000); - } - ap->prd[pi].flags_len = cpu_to_le32(blen); - VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", pi, addr, len); - - pi++; - sg_len -= len; - addr += len; - } - } - - ap->prd[pi - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT); -} - -/** * ata_check_atapi_dma - Check whether ATAPI DMA can be supported * @qc: Metadata associated with taskfile to check * @@ -4924,40 +4348,6 @@ int ata_std_qc_defer(struct ata_queued_cmd *qc) return ATA_DEFER_LINK; } -/** - * ata_qc_prep - Prepare taskfile for submission - * @qc: Metadata associated with taskfile to be prepared - * - * Prepare ATA taskfile for submission. - * - * LOCKING: - * spin_lock_irqsave(host lock) - */ -void ata_qc_prep(struct ata_queued_cmd *qc) -{ - if (!(qc->flags & ATA_QCFLAG_DMAMAP)) - return; - - ata_fill_sg(qc); -} - -/** - * ata_dumb_qc_prep - Prepare taskfile for submission - * @qc: Metadata associated with taskfile to be prepared - * - * Prepare ATA taskfile for submission. - * - * LOCKING: - * spin_lock_irqsave(host lock) - */ -void ata_dumb_qc_prep(struct ata_queued_cmd *qc) -{ - if (!(qc->flags & ATA_QCFLAG_DMAMAP)) - return; - - ata_fill_sg_dumb(qc); -} - void ata_noop_qc_prep(struct ata_queued_cmd *qc) { } /** @@ -5036,698 +4426,6 @@ void swap_buf_le16(u16 *buf, unsigned int buf_words) } /** - * ata_data_xfer - Transfer data by PIO - * @dev: device to target - * @buf: data buffer - * @buflen: buffer length - * @rw: read/write - * - * Transfer data from/to the device data register by PIO. - * - * LOCKING: - * Inherited from caller. - * - * RETURNS: - * Bytes consumed. - */ -unsigned int ata_data_xfer(struct ata_device *dev, unsigned char *buf, - unsigned int buflen, int rw) -{ - struct ata_port *ap = dev->link->ap; - void __iomem *data_addr = ap->ioaddr.data_addr; - unsigned int words = buflen >> 1; - - /* Transfer multiple of 2 bytes */ - if (rw == READ) - ioread16_rep(data_addr, buf, words); - else - iowrite16_rep(data_addr, buf, words); - - /* Transfer trailing 1 byte, if any. */ - if (unlikely(buflen & 0x01)) { - __le16 align_buf[1] = { 0 }; - unsigned char *trailing_buf = buf + buflen - 1; - - if (rw == READ) { - align_buf[0] = cpu_to_le16(ioread16(data_addr)); - memcpy(trailing_buf, align_buf, 1); - } else { - memcpy(align_buf, trailing_buf, 1); - iowrite16(le16_to_cpu(align_buf[0]), data_addr); - } - words++; - } - - return words << 1; -} - -/** - * ata_data_xfer_noirq - Transfer data by PIO - * @dev: device to target - * @buf: data buffer - * @buflen: buffer length - * @rw: read/write - * - * Transfer data from/to the device data register by PIO. Do the - * transfer with interrupts disabled. - * - * LOCKING: - * Inherited from caller. - * - * RETURNS: - * Bytes consumed. - */ -unsigned int ata_data_xfer_noirq(struct ata_device *dev, unsigned char *buf, - unsigned int buflen, int rw) -{ - unsigned long flags; - unsigned int consumed; - - local_irq_save(flags); - consumed = ata_data_xfer(dev, buf, buflen, rw); - local_irq_restore(flags); - - return consumed; -} - - -/** - * ata_pio_sector - Transfer a sector of data. - * @qc: Command on going - * - * Transfer qc->sect_size bytes of data from/to the ATA device. - * - * LOCKING: - * Inherited from caller. - */ - -static void ata_pio_sector(struct ata_queued_cmd *qc) -{ - int do_write = (qc->tf.flags & ATA_TFLAG_WRITE); - struct ata_port *ap = qc->ap; - struct page *page; - unsigned int offset; - unsigned char *buf; - - if (qc->curbytes == qc->nbytes - qc->sect_size) - ap->hsm_task_state = HSM_ST_LAST; - - page = sg_page(qc->cursg); - offset = qc->cursg->offset + qc->cursg_ofs; - - /* get the current page and offset */ - page = nth_page(page, (offset >> PAGE_SHIFT)); - offset %= PAGE_SIZE; - - DPRINTK("data %s\n", qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read"); - - if (PageHighMem(page)) { - unsigned long flags; - - /* FIXME: use a bounce buffer */ - local_irq_save(flags); - buf = kmap_atomic(page, KM_IRQ0); - - /* do the actual data transfer */ - ap->ops->data_xfer(qc->dev, buf + offset, qc->sect_size, do_write); - - kunmap_atomic(buf, KM_IRQ0); - local_irq_restore(flags); - } else { - buf = page_address(page); - ap->ops->data_xfer(qc->dev, buf + offset, qc->sect_size, do_write); - } - - qc->curbytes += qc->sect_size; - qc->cursg_ofs += qc->sect_size; - - if (qc->cursg_ofs == qc->cursg->length) { - qc->cursg = sg_next(qc->cursg); - qc->cursg_ofs = 0; - } -} - -/** - * ata_pio_sectors - Transfer one or many sectors. - * @qc: Command on going - * - * Transfer one or many sectors of data from/to the - * ATA device for the DRQ request. - * - * LOCKING: - * Inherited from caller. - */ - -static void ata_pio_sectors(struct ata_queued_cmd *qc) -{ - if (is_multi_taskfile(&qc->tf)) { - /* READ/WRITE MULTIPLE */ - unsigned int nsect; - - WARN_ON(qc->dev->multi_count == 0); - - nsect = min((qc->nbytes - qc->curbytes) / qc->sect_size, - qc->dev->multi_count); - while (nsect--) - ata_pio_sector(qc); - } else - ata_pio_sector(qc); - - ata_altstatus(qc->ap); /* flush */ -} - -/** - * atapi_send_cdb - Write CDB bytes to hardware - * @ap: Port to which ATAPI device is attached. - * @qc: Taskfile currently active - * - * When device has indicated its readiness to accept - * a CDB, this function is called. Send the CDB. - * - * LOCKING: - * caller. - */ - -static void atapi_send_cdb(struct ata_port *ap, struct ata_queued_cmd *qc) -{ - /* send SCSI cdb */ - DPRINTK("send cdb\n"); - WARN_ON(qc->dev->cdb_len < 12); - - ap->ops->data_xfer(qc->dev, qc->cdb, qc->dev->cdb_len, 1); - ata_altstatus(ap); /* flush */ - - switch (qc->tf.protocol) { - case ATAPI_PROT_PIO: - ap->hsm_task_state = HSM_ST; - break; - case ATAPI_PROT_NODATA: - ap->hsm_task_state = HSM_ST_LAST; - break; - case ATAPI_PROT_DMA: - ap->hsm_task_state = HSM_ST_LAST; - /* initiate bmdma */ - ap->ops->bmdma_start(qc); - break; - } -} - -/** - * __atapi_pio_bytes - Transfer data from/to the ATAPI device. - * @qc: Command on going - * @bytes: number of bytes - * - * Transfer Transfer data from/to the ATAPI device. - * - * LOCKING: - * Inherited from caller. - * - */ -static int __atapi_pio_bytes(struct ata_queued_cmd *qc, unsigned int bytes) -{ - int rw = (qc->tf.flags & ATA_TFLAG_WRITE) ? WRITE : READ; - struct ata_port *ap = qc->ap; - struct ata_device *dev = qc->dev; - struct ata_eh_info *ehi = &dev->link->eh_info; - struct scatterlist *sg; - struct page *page; - unsigned char *buf; - unsigned int offset, count, consumed; - -next_sg: - sg = qc->cursg; - if (unlikely(!sg)) { - ata_ehi_push_desc(ehi, "unexpected or too much trailing data " - "buf=%u cur=%u bytes=%u", - qc->nbytes, qc->curbytes, bytes); - return -1; - } - - page = sg_page(sg); - offset = sg->offset + qc->cursg_ofs; - - /* get the current page and offset */ - page = nth_page(page, (offset >> PAGE_SHIFT)); - offset %= PAGE_SIZE; - - /* don't overrun current sg */ - count = min(sg->length - qc->cursg_ofs, bytes); - - /* don't cross page boundaries */ - count = min(count, (unsigned int)PAGE_SIZE - offset); - - DPRINTK("data %s\n", qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read"); - - if (PageHighMem(page)) { - unsigned long flags; - - /* FIXME: use bounce buffer */ - local_irq_save(flags); - buf = kmap_atomic(page, KM_IRQ0); - - /* do the actual data transfer */ - consumed = ap->ops->data_xfer(dev, buf + offset, count, rw); - - kunmap_atomic(buf, KM_IRQ0); - local_irq_restore(flags); - } else { - buf = page_address(page); - consumed = ap->ops->data_xfer(dev, buf + offset, count, rw); - } - - bytes -= min(bytes, consumed); - qc->curbytes += count; - qc->cursg_ofs += count; - - if (qc->cursg_ofs == sg->length) { - qc->cursg = sg_next(qc->cursg); - qc->cursg_ofs = 0; - } - - /* consumed can be larger than count only for the last transfer */ - WARN_ON(qc->cursg && count != consumed); - - if (bytes) - goto next_sg; - return 0; -} - -/** - * atapi_pio_bytes - Transfer data from/to the ATAPI device. - * @qc: Command on going - * - * Transfer Transfer data from/to the ATAPI device. - * - * LOCKING: - * Inherited from caller. - */ - -static void atapi_pio_bytes(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - struct ata_device *dev = qc->dev; - struct ata_eh_info *ehi = &dev->link->eh_info; - unsigned int ireason, bc_lo, bc_hi, bytes; - int i_write, do_write = (qc->tf.flags & ATA_TFLAG_WRITE) ? 1 : 0; - - /* Abuse qc->result_tf for temp storage of intermediate TF - * here to save some kernel stack usage. - * For normal completion, qc->result_tf is not relevant. For - * error, qc->result_tf is later overwritten by ata_qc_complete(). - * So, the correctness of qc->result_tf is not affected. - */ - ap->ops->tf_read(ap, &qc->result_tf); - ireason = qc->result_tf.nsect; - bc_lo = qc->result_tf.lbam; - bc_hi = qc->result_tf.lbah; - bytes = (bc_hi << 8) | bc_lo; - - /* shall be cleared to zero, indicating xfer of data */ - if (unlikely(ireason & (1 << 0))) - goto atapi_check; - - /* make sure transfer direction matches expected */ - i_write = ((ireason & (1 << 1)) == 0) ? 1 : 0; - if (unlikely(do_write != i_write)) - goto atapi_check; - - if (unlikely(!bytes)) - goto atapi_check; - - VPRINTK("ata%u: xfering %d bytes\n", ap->print_id, bytes); - - if (unlikely(__atapi_pio_bytes(qc, bytes))) - goto err_out; - ata_altstatus(ap); /* flush */ - - return; - - atapi_check: - ata_ehi_push_desc(ehi, "ATAPI check failed (ireason=0x%x bytes=%u)", - ireason, bytes); - err_out: - qc->err_mask |= AC_ERR_HSM; - ap->hsm_task_state = HSM_ST_ERR; -} - -/** - * ata_hsm_ok_in_wq - Check if the qc can be handled in the workqueue. - * @ap: the target ata_port - * @qc: qc on going - * - * RETURNS: - * 1 if ok in workqueue, 0 otherwise. - */ - -static inline int ata_hsm_ok_in_wq(struct ata_port *ap, struct ata_queued_cmd *qc) -{ - if (qc->tf.flags & ATA_TFLAG_POLLING) - return 1; - - if (ap->hsm_task_state == HSM_ST_FIRST) { - if (qc->tf.protocol == ATA_PROT_PIO && - (qc->tf.flags & ATA_TFLAG_WRITE)) - return 1; - - if (ata_is_atapi(qc->tf.protocol) && - !(qc->dev->flags & ATA_DFLAG_CDB_INTR)) - return 1; - } - - return 0; -} - -/** - * ata_hsm_qc_complete - finish a qc running on standard HSM - * @qc: Command to complete - * @in_wq: 1 if called from workqueue, 0 otherwise - * - * Finish @qc which is running on standard HSM. - * - * LOCKING: - * If @in_wq is zero, spin_lock_irqsave(host lock). - * Otherwise, none on entry and grabs host lock. - */ -static void ata_hsm_qc_complete(struct ata_queued_cmd *qc, int in_wq) -{ - struct ata_port *ap = qc->ap; - unsigned long flags; - - if (ap->ops->error_handler) { - if (in_wq) { - spin_lock_irqsave(ap->lock, flags); - - /* EH might have kicked in while host lock is - * released. - */ - qc = ata_qc_from_tag(ap, qc->tag); - if (qc) { - if (likely(!(qc->err_mask & AC_ERR_HSM))) { - ap->ops->irq_on(ap); - ata_qc_complete(qc); - } else - ata_port_freeze(ap); - } - - spin_unlock_irqrestore(ap->lock, flags); - } else { - if (likely(!(qc->err_mask & AC_ERR_HSM))) - ata_qc_complete(qc); - else - ata_port_freeze(ap); - } - } else { - if (in_wq) { - spin_lock_irqsave(ap->lock, flags); - ap->ops->irq_on(ap); - ata_qc_complete(qc); - spin_unlock_irqrestore(ap->lock, flags); - } else - ata_qc_complete(qc); - } -} - -/** - * ata_hsm_move - move the HSM to the next state. - * @ap: the target ata_port - * @qc: qc on going - * @status: current device status - * @in_wq: 1 if called from workqueue, 0 otherwise - * - * RETURNS: - * 1 when poll next status needed, 0 otherwise. - */ -int ata_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc, - u8 status, int in_wq) -{ - unsigned long flags = 0; - int poll_next; - - WARN_ON((qc->flags & ATA_QCFLAG_ACTIVE) == 0); - - /* Make sure ata_qc_issue_prot() does not throw things - * like DMA polling into the workqueue. Notice that - * in_wq is not equivalent to (qc->tf.flags & ATA_TFLAG_POLLING). - */ - WARN_ON(in_wq != ata_hsm_ok_in_wq(ap, qc)); - -fsm_start: - DPRINTK("ata%u: protocol %d task_state %d (dev_stat 0x%X)\n", - ap->print_id, qc->tf.protocol, ap->hsm_task_state, status); - - switch (ap->hsm_task_state) { - case HSM_ST_FIRST: - /* Send first data block or PACKET CDB */ - - /* If polling, we will stay in the work queue after - * sending the data. Otherwise, interrupt handler - * takes over after sending the data. - */ - poll_next = (qc->tf.flags & ATA_TFLAG_POLLING); - - /* check device status */ - if (unlikely((status & ATA_DRQ) == 0)) { - /* handle BSY=0, DRQ=0 as error */ - if (likely(status & (ATA_ERR | ATA_DF))) - /* device stops HSM for abort/error */ - qc->err_mask |= AC_ERR_DEV; - else - /* HSM violation. Let EH handle this */ - qc->err_mask |= AC_ERR_HSM; - - ap->hsm_task_state = HSM_ST_ERR; - goto fsm_start; - } - - /* Device should not ask for data transfer (DRQ=1) - * when it finds something wrong. - * We ignore DRQ here and stop the HSM by - * changing hsm_task_state to HSM_ST_ERR and - * let the EH abort the command or reset the device. - */ - if (unlikely(status & (ATA_ERR | ATA_DF))) { - /* Some ATAPI tape drives forget to clear the ERR bit - * when doing the next command (mostly request sense). - * We ignore ERR here to workaround and proceed sending - * the CDB. - */ - if (!(qc->dev->horkage & ATA_HORKAGE_STUCK_ERR)) { - ata_port_printk(ap, KERN_WARNING, - "DRQ=1 with device error, " - "dev_stat 0x%X\n", status); - qc->err_mask |= AC_ERR_HSM; - ap->hsm_task_state = HSM_ST_ERR; - goto fsm_start; - } - } - - /* Send the CDB (atapi) or the first data block (ata pio out). - * During the state transition, interrupt handler shouldn't - * be invoked before the data transfer is complete and - * hsm_task_state is changed. Hence, the following locking. - */ - if (in_wq) - spin_lock_irqsave(ap->lock, flags); - - if (qc->tf.protocol == ATA_PROT_PIO) { - /* PIO data out protocol. - * send first data block. - */ - - /* ata_pio_sectors() might change the state - * to HSM_ST_LAST. so, the state is changed here - * before ata_pio_sectors(). - */ - ap->hsm_task_state = HSM_ST; - ata_pio_sectors(qc); - } else - /* send CDB */ - atapi_send_cdb(ap, qc); - - if (in_wq) - spin_unlock_irqrestore(ap->lock, flags); - - /* if polling, ata_pio_task() handles the rest. - * otherwise, interrupt handler takes over from here. - */ - break; - - case HSM_ST: - /* complete command or read/write the data register */ - if (qc->tf.protocol == ATAPI_PROT_PIO) { - /* ATAPI PIO protocol */ - if ((status & ATA_DRQ) == 0) { - /* No more data to transfer or device error. - * Device error will be tagged in HSM_ST_LAST. - */ - ap->hsm_task_state = HSM_ST_LAST; - goto fsm_start; - } - - /* Device should not ask for data transfer (DRQ=1) - * when it finds something wrong. - * We ignore DRQ here and stop the HSM by - * changing hsm_task_state to HSM_ST_ERR and - * let the EH abort the command or reset the device. - */ - if (unlikely(status & (ATA_ERR | ATA_DF))) { - ata_port_printk(ap, KERN_WARNING, "DRQ=1 with " - "device error, dev_stat 0x%X\n", - status); - qc->err_mask |= AC_ERR_HSM; - ap->hsm_task_state = HSM_ST_ERR; - goto fsm_start; - } - - atapi_pio_bytes(qc); - - if (unlikely(ap->hsm_task_state == HSM_ST_ERR)) - /* bad ireason reported by device */ - goto fsm_start; - - } else { - /* ATA PIO protocol */ - if (unlikely((status & ATA_DRQ) == 0)) { - /* handle BSY=0, DRQ=0 as error */ - if (likely(status & (ATA_ERR | ATA_DF))) - /* device stops HSM for abort/error */ - qc->err_mask |= AC_ERR_DEV; - else - /* HSM violation. Let EH handle this. - * Phantom devices also trigger this - * condition. Mark hint. - */ - qc->err_mask |= AC_ERR_HSM | - AC_ERR_NODEV_HINT; - - ap->hsm_task_state = HSM_ST_ERR; - goto fsm_start; - } - - /* For PIO reads, some devices may ask for - * data transfer (DRQ=1) alone with ERR=1. - * We respect DRQ here and transfer one - * block of junk data before changing the - * hsm_task_state to HSM_ST_ERR. - * - * For PIO writes, ERR=1 DRQ=1 doesn't make - * sense since the data block has been - * transferred to the device. - */ - if (unlikely(status & (ATA_ERR | ATA_DF))) { - /* data might be corrputed */ - qc->err_mask |= AC_ERR_DEV; - - if (!(qc->tf.flags & ATA_TFLAG_WRITE)) { - ata_pio_sectors(qc); - status = ata_wait_idle(ap); - } - - if (status & (ATA_BUSY | ATA_DRQ)) - qc->err_mask |= AC_ERR_HSM; - - /* ata_pio_sectors() might change the - * state to HSM_ST_LAST. so, the state - * is changed after ata_pio_sectors(). - */ - ap->hsm_task_state = HSM_ST_ERR; - goto fsm_start; - } - - ata_pio_sectors(qc); - - if (ap->hsm_task_state == HSM_ST_LAST && - (!(qc->tf.flags & ATA_TFLAG_WRITE))) { - /* all data read */ - status = ata_wait_idle(ap); - goto fsm_start; - } - } - - poll_next = 1; - break; - - case HSM_ST_LAST: - if (unlikely(!ata_ok(status))) { - qc->err_mask |= __ac_err_mask(status); - ap->hsm_task_state = HSM_ST_ERR; - goto fsm_start; - } - - /* no more data to transfer */ - DPRINTK("ata%u: dev %u command complete, drv_stat 0x%x\n", - ap->print_id, qc->dev->devno, status); - - WARN_ON(qc->err_mask); - - ap->hsm_task_state = HSM_ST_IDLE; - - /* complete taskfile transaction */ - ata_hsm_qc_complete(qc, in_wq); - - poll_next = 0; - break; - - case HSM_ST_ERR: - /* make sure qc->err_mask is available to - * know what's wrong and recover - */ - WARN_ON(qc->err_mask == 0); - - ap->hsm_task_state = HSM_ST_IDLE; - - /* complete taskfile transaction */ - ata_hsm_qc_complete(qc, in_wq); - - poll_next = 0; - break; - default: - poll_next = 0; - BUG(); - } - - return poll_next; -} - -static void ata_pio_task(struct work_struct *work) -{ - struct ata_port *ap = - container_of(work, struct ata_port, port_task.work); - struct ata_queued_cmd *qc = ap->port_task_data; - u8 status; - int poll_next; - -fsm_start: - WARN_ON(ap->hsm_task_state == HSM_ST_IDLE); - - /* - * This is purely heuristic. This is a fast path. - * Sometimes when we enter, BSY will be cleared in - * a chk-status or two. If not, the drive is probably seeking - * or something. Snooze for a couple msecs, then - * chk-status again. If still busy, queue delayed work. - */ - status = ata_busy_wait(ap, ATA_BUSY, 5); - if (status & ATA_BUSY) { - msleep(2); - status = ata_busy_wait(ap, ATA_BUSY, 10); - if (status & ATA_BUSY) { - ata_pio_queue_task(ap, qc, ATA_SHORT_PAUSE); - return; - } - } - - /* move the HSM */ - poll_next = ata_hsm_move(ap, qc, status, 1); - - /* another command or interrupt handler - * may be running at this point. - */ - if (poll_next) - goto fsm_start; -} - -/** * ata_qc_new - Request an available ATA command, for queueing * @ap: Port associated with device @dev * @dev: Device from whom we request an available command structure @@ -5850,7 +4548,7 @@ static void fill_result_tf(struct ata_queued_cmd *qc) struct ata_port *ap = qc->ap; qc->result_tf.flags = qc->tf.flags; - ap->ops->tf_read(ap, &qc->result_tf); + ap->ops->qc_fill_rtf(qc); } static void ata_verify_xfer(struct ata_queued_cmd *qc) @@ -5960,7 +4658,6 @@ void ata_qc_complete(struct ata_queued_cmd *qc) * ata_qc_complete_multiple - Complete multiple qcs successfully * @ap: port in question * @qc_active: new qc_active mask - * @finish_qc: LLDD callback invoked before completing a qc * * Complete in-flight commands. This functions is meant to be * called from low-level driver's interrupt routine to complete @@ -5973,8 +4670,7 @@ void ata_qc_complete(struct ata_queued_cmd *qc) * RETURNS: * Number of completed commands on success, -errno otherwise. */ -int ata_qc_complete_multiple(struct ata_port *ap, u32 qc_active, - void (*finish_qc)(struct ata_queued_cmd *)) +int ata_qc_complete_multiple(struct ata_port *ap, u32 qc_active) { int nr_done = 0; u32 done_mask; @@ -5995,8 +4691,6 @@ int ata_qc_complete_multiple(struct ata_port *ap, u32 qc_active, continue; if ((qc = ata_qc_from_tag(ap, i))) { - if (finish_qc) - finish_qc(qc); ata_qc_complete(qc); nr_done++; } @@ -6055,9 +4749,9 @@ void ata_qc_issue(struct ata_queued_cmd *qc) if (ata_sg_setup(qc)) goto sg_err; - /* if device is sleeping, schedule softreset and abort the link */ + /* if device is sleeping, schedule reset and abort the link */ if (unlikely(qc->dev->flags & ATA_DFLAG_SLEEPING)) { - link->eh_info.action |= ATA_EH_SOFTRESET; + link->eh_info.action |= ATA_EH_RESET; ata_ehi_push_desc(&link->eh_info, "waking up from sleep"); ata_link_abort(link); return; @@ -6077,285 +4771,6 @@ err: } /** - * ata_qc_issue_prot - issue taskfile to device in proto-dependent manner - * @qc: command to issue to device - * - * Using various libata functions and hooks, this function - * starts an ATA command. ATA commands are grouped into - * classes called "protocols", and issuing each type of protocol - * is slightly different. - * - * May be used as the qc_issue() entry in ata_port_operations. - * - * LOCKING: - * spin_lock_irqsave(host lock) - * - * RETURNS: - * Zero on success, AC_ERR_* mask on failure - */ - -unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - - /* Use polling pio if the LLD doesn't handle - * interrupt driven pio and atapi CDB interrupt. - */ - if (ap->flags & ATA_FLAG_PIO_POLLING) { - switch (qc->tf.protocol) { - case ATA_PROT_PIO: - case ATA_PROT_NODATA: - case ATAPI_PROT_PIO: - case ATAPI_PROT_NODATA: - qc->tf.flags |= ATA_TFLAG_POLLING; - break; - case ATAPI_PROT_DMA: - if (qc->dev->flags & ATA_DFLAG_CDB_INTR) - /* see ata_dma_blacklisted() */ - BUG(); - break; - default: - break; - } - } - - /* select the device */ - ata_dev_select(ap, qc->dev->devno, 1, 0); - - /* start the command */ - switch (qc->tf.protocol) { - case ATA_PROT_NODATA: - if (qc->tf.flags & ATA_TFLAG_POLLING) - ata_qc_set_polling(qc); - - ata_tf_to_host(ap, &qc->tf); - ap->hsm_task_state = HSM_ST_LAST; - - if (qc->tf.flags & ATA_TFLAG_POLLING) - ata_pio_queue_task(ap, qc, 0); - - break; - - case ATA_PROT_DMA: - WARN_ON(qc->tf.flags & ATA_TFLAG_POLLING); - - ap->ops->tf_load(ap, &qc->tf); /* load tf registers */ - ap->ops->bmdma_setup(qc); /* set up bmdma */ - ap->ops->bmdma_start(qc); /* initiate bmdma */ - ap->hsm_task_state = HSM_ST_LAST; - break; - - case ATA_PROT_PIO: - if (qc->tf.flags & ATA_TFLAG_POLLING) - ata_qc_set_polling(qc); - - ata_tf_to_host(ap, &qc->tf); - - if (qc->tf.flags & ATA_TFLAG_WRITE) { - /* PIO data out protocol */ - ap->hsm_task_state = HSM_ST_FIRST; - ata_pio_queue_task(ap, qc, 0); - - /* always send first data block using - * the ata_pio_task() codepath. - */ - } else { - /* PIO data in protocol */ - ap->hsm_task_state = HSM_ST; - - if (qc->tf.flags & ATA_TFLAG_POLLING) - ata_pio_queue_task(ap, qc, 0); - - /* if polling, ata_pio_task() handles the rest. - * otherwise, interrupt handler takes over from here. - */ - } - - break; - - case ATAPI_PROT_PIO: - case ATAPI_PROT_NODATA: - if (qc->tf.flags & ATA_TFLAG_POLLING) - ata_qc_set_polling(qc); - - ata_tf_to_host(ap, &qc->tf); - - ap->hsm_task_state = HSM_ST_FIRST; - - /* send cdb by polling if no cdb interrupt */ - if ((!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) || - (qc->tf.flags & ATA_TFLAG_POLLING)) - ata_pio_queue_task(ap, qc, 0); - break; - - case ATAPI_PROT_DMA: - WARN_ON(qc->tf.flags & ATA_TFLAG_POLLING); - - ap->ops->tf_load(ap, &qc->tf); /* load tf registers */ - ap->ops->bmdma_setup(qc); /* set up bmdma */ - ap->hsm_task_state = HSM_ST_FIRST; - - /* send cdb by polling if no cdb interrupt */ - if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) - ata_pio_queue_task(ap, qc, 0); - break; - - default: - WARN_ON(1); - return AC_ERR_SYSTEM; - } - - return 0; -} - -/** - * ata_host_intr - Handle host interrupt for given (port, task) - * @ap: Port on which interrupt arrived (possibly...) - * @qc: Taskfile currently active in engine - * - * Handle host interrupt for given queued command. Currently, - * only DMA interrupts are handled. All other commands are - * handled via polling with interrupts disabled (nIEN bit). - * - * LOCKING: - * spin_lock_irqsave(host lock) - * - * RETURNS: - * One if interrupt was handled, zero if not (shared irq). - */ - -inline unsigned int ata_host_intr(struct ata_port *ap, - struct ata_queued_cmd *qc) -{ - struct ata_eh_info *ehi = &ap->link.eh_info; - u8 status, host_stat = 0; - - VPRINTK("ata%u: protocol %d task_state %d\n", - ap->print_id, qc->tf.protocol, ap->hsm_task_state); - - /* Check whether we are expecting interrupt in this state */ - switch (ap->hsm_task_state) { - case HSM_ST_FIRST: - /* Some pre-ATAPI-4 devices assert INTRQ - * at this state when ready to receive CDB. - */ - - /* Check the ATA_DFLAG_CDB_INTR flag is enough here. - * The flag was turned on only for atapi devices. No - * need to check ata_is_atapi(qc->tf.protocol) again. - */ - if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) - goto idle_irq; - break; - case HSM_ST_LAST: - if (qc->tf.protocol == ATA_PROT_DMA || - qc->tf.protocol == ATAPI_PROT_DMA) { - /* check status of DMA engine */ - host_stat = ap->ops->bmdma_status(ap); - VPRINTK("ata%u: host_stat 0x%X\n", - ap->print_id, host_stat); - - /* if it's not our irq... */ - if (!(host_stat & ATA_DMA_INTR)) - goto idle_irq; - - /* before we do anything else, clear DMA-Start bit */ - ap->ops->bmdma_stop(qc); - - if (unlikely(host_stat & ATA_DMA_ERR)) { - /* error when transfering data to/from memory */ - qc->err_mask |= AC_ERR_HOST_BUS; - ap->hsm_task_state = HSM_ST_ERR; - } - } - break; - case HSM_ST: - break; - default: - goto idle_irq; - } - - /* check altstatus */ - status = ata_altstatus(ap); - if (status & ATA_BUSY) - goto idle_irq; - - /* check main status, clearing INTRQ */ - status = ata_chk_status(ap); - if (unlikely(status & ATA_BUSY)) - goto idle_irq; - - /* ack bmdma irq events */ - ap->ops->irq_clear(ap); - - ata_hsm_move(ap, qc, status, 0); - - if (unlikely(qc->err_mask) && (qc->tf.protocol == ATA_PROT_DMA || - qc->tf.protocol == ATAPI_PROT_DMA)) - ata_ehi_push_desc(ehi, "BMDMA stat 0x%x", host_stat); - - return 1; /* irq handled */ - -idle_irq: - ap->stats.idle_irq++; - -#ifdef ATA_IRQ_TRAP - if ((ap->stats.idle_irq % 1000) == 0) { - ata_chk_status(ap); - ap->ops->irq_clear(ap); - ata_port_printk(ap, KERN_WARNING, "irq trap\n"); - return 1; - } -#endif - return 0; /* irq not handled */ -} - -/** - * ata_interrupt - Default ATA host interrupt handler - * @irq: irq line (unused) - * @dev_instance: pointer to our ata_host information structure - * - * Default interrupt handler for PCI IDE devices. Calls - * ata_host_intr() for each port that is not disabled. - * - * LOCKING: - * Obtains host lock during operation. - * - * RETURNS: - * IRQ_NONE or IRQ_HANDLED. - */ - -irqreturn_t ata_interrupt(int irq, void *dev_instance) -{ - struct ata_host *host = dev_instance; - unsigned int i; - unsigned int handled = 0; - unsigned long flags; - - /* TODO: make _irqsave conditional on x86 PCI IDE legacy mode */ - spin_lock_irqsave(&host->lock, flags); - - for (i = 0; i < host->n_ports; i++) { - struct ata_port *ap; - - ap = host->ports[i]; - if (ap && - !(ap->flags & ATA_FLAG_DISABLED)) { - struct ata_queued_cmd *qc; - - qc = ata_qc_from_tag(ap, ap->link.active_tag); - if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)) && - (qc->flags & ATA_QCFLAG_ACTIVE)) - handled |= ata_host_intr(ap, qc); - } - } - - spin_unlock_irqrestore(&host->lock, flags); - - return IRQ_RETVAL(handled); -} - -/** * sata_scr_valid - test whether SCRs are accessible * @link: ATA link to test SCR accessibility for * @@ -6513,32 +4928,6 @@ int ata_link_offline(struct ata_link *link) return 0; } -int ata_flush_cache(struct ata_device *dev) -{ - unsigned int err_mask; - u8 cmd; - - if (!ata_try_flush_cache(dev)) - return 0; - - if (dev->flags & ATA_DFLAG_FLUSH_EXT) - cmd = ATA_CMD_FLUSH_EXT; - else - cmd = ATA_CMD_FLUSH; - - /* This is wrong. On a failed flush we get back the LBA of the lost - sector and we should (assuming it wasn't aborted as unknown) issue - a further flush command to continue the writeback until it - does not error */ - err_mask = ata_do_simple_cmd(dev, cmd); - if (err_mask) { - ata_dev_printk(dev, KERN_ERR, "failed to flush cache\n"); - return -EIO; - } - - return 0; -} - #ifdef CONFIG_PM static int ata_host_request_pm(struct ata_host *host, pm_message_t mesg, unsigned int action, unsigned int ehi_flags, @@ -6634,7 +5023,7 @@ int ata_host_suspend(struct ata_host *host, pm_message_t mesg) */ void ata_host_resume(struct ata_host *host) { - ata_host_request_pm(host, PMSG_ON, ATA_EH_SOFTRESET, + ata_host_request_pm(host, PMSG_ON, ATA_EH_RESET, ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET, 0); host->dev->power.power_state = PMSG_ON; @@ -6809,7 +5198,9 @@ struct ata_port *ata_port_alloc(struct ata_host *host) ap->msg_enable = ATA_MSG_DRV | ATA_MSG_ERR | ATA_MSG_WARN; #endif +#ifdef CONFIG_ATA_SFF INIT_DELAYED_WORK(&ap->port_task, ata_pio_task); +#endif INIT_DELAYED_WORK(&ap->hotplug_task, ata_scsi_hotplug); INIT_WORK(&ap->scsi_rescan_task, ata_scsi_dev_rescan); INIT_LIST_HEAD(&ap->eh_done_q); @@ -6959,8 +5350,6 @@ struct ata_host *ata_host_alloc_pinfo(struct device *dev, if (!host->ops && (pi->port_ops != &ata_dummy_port_ops)) host->ops = pi->port_ops; - if (!host->private_data && pi->private_data) - host->private_data = pi->private_data; } return host; @@ -6985,6 +5374,56 @@ static void ata_host_stop(struct device *gendev, void *res) } /** + * ata_finalize_port_ops - finalize ata_port_operations + * @ops: ata_port_operations to finalize + * + * An ata_port_operations can inherit from another ops and that + * ops can again inherit from another. This can go on as many + * times as necessary as long as there is no loop in the + * inheritance chain. + * + * Ops tables are finalized when the host is started. NULL or + * unspecified entries are inherited from the closet ancestor + * which has the method and the entry is populated with it. + * After finalization, the ops table directly points to all the + * methods and ->inherits is no longer necessary and cleared. + * + * Using ATA_OP_NULL, inheriting ops can force a method to NULL. + * + * LOCKING: + * None. + */ +static void ata_finalize_port_ops(struct ata_port_operations *ops) +{ + static spinlock_t lock = SPIN_LOCK_UNLOCKED; + const struct ata_port_operations *cur; + void **begin = (void **)ops; + void **end = (void **)&ops->inherits; + void **pp; + + if (!ops || !ops->inherits) + return; + + spin_lock(&lock); + + for (cur = ops->inherits; cur; cur = cur->inherits) { + void **inherit = (void **)cur; + + for (pp = begin; pp < end; pp++, inherit++) + if (!*pp) + *pp = *inherit; + } + + for (pp = begin; pp < end; pp++) + if (IS_ERR(*pp)) + *pp = NULL; + + ops->inherits = NULL; + + spin_unlock(&lock); +} + +/** * ata_host_start - start and freeze ports of an ATA host * @host: ATA host to start ports for * @@ -7009,9 +5448,13 @@ int ata_host_start(struct ata_host *host) if (host->flags & ATA_HOST_STARTED) return 0; + ata_finalize_port_ops(host->ops); + for (i = 0; i < host->n_ports; i++) { struct ata_port *ap = host->ports[i]; + ata_finalize_port_ops(ap->ops); + if (!host->ops && !ata_port_is_dummy(ap)) host->ops = ap->ops; @@ -7073,7 +5516,7 @@ int ata_host_start(struct ata_host *host) */ /* KILLME - the only user left is ipr */ void ata_host_init(struct ata_host *host, struct device *dev, - unsigned long flags, const struct ata_port_operations *ops) + unsigned long flags, struct ata_port_operations *ops) { spin_lock_init(&host->lock); host->dev = dev; @@ -7169,9 +5612,8 @@ int ata_host_register(struct ata_host *host, struct scsi_host_template *sht) /* kick EH for boot probing */ spin_lock_irqsave(ap->lock, flags); - ehi->probe_mask = - (1 << ata_link_max_devices(&ap->link)) - 1; - ehi->action |= ATA_EH_SOFTRESET; + ehi->probe_mask |= ATA_ALL_DEVICES; + ehi->action |= ATA_EH_RESET; ehi->flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET; ap->pflags &= ~ATA_PFLAG_INITIALIZING; @@ -7336,33 +5778,6 @@ void ata_host_detach(struct ata_host *host) ata_acpi_dissociate(host); } -/** - * ata_std_ports - initialize ioaddr with standard port offsets. - * @ioaddr: IO address structure to be initialized - * - * Utility function which initializes data_addr, error_addr, - * feature_addr, nsect_addr, lbal_addr, lbam_addr, lbah_addr, - * device_addr, status_addr, and command_addr to standard offsets - * relative to cmd_addr. - * - * Does not set ctl_addr, altstatus_addr, bmdma_addr, or scr_addr. - */ - -void ata_std_ports(struct ata_ioports *ioaddr) -{ - ioaddr->data_addr = ioaddr->cmd_addr + ATA_REG_DATA; - ioaddr->error_addr = ioaddr->cmd_addr + ATA_REG_ERR; - ioaddr->feature_addr = ioaddr->cmd_addr + ATA_REG_FEATURE; - ioaddr->nsect_addr = ioaddr->cmd_addr + ATA_REG_NSECT; - ioaddr->lbal_addr = ioaddr->cmd_addr + ATA_REG_LBAL; - ioaddr->lbam_addr = ioaddr->cmd_addr + ATA_REG_LBAM; - ioaddr->lbah_addr = ioaddr->cmd_addr + ATA_REG_LBAH; - ioaddr->device_addr = ioaddr->cmd_addr + ATA_REG_DEVICE; - ioaddr->status_addr = ioaddr->cmd_addr + ATA_REG_STATUS; - ioaddr->command_addr = ioaddr->cmd_addr + ATA_REG_CMD; -} - - #ifdef CONFIG_PCI /** @@ -7749,33 +6164,20 @@ u32 ata_wait_register(void __iomem *reg, u32 mask, u32 val, /* * Dummy port_ops */ -static void ata_dummy_noret(struct ata_port *ap) { } -static int ata_dummy_ret0(struct ata_port *ap) { return 0; } -static void ata_dummy_qc_noret(struct ata_queued_cmd *qc) { } - -static u8 ata_dummy_check_status(struct ata_port *ap) +static unsigned int ata_dummy_qc_issue(struct ata_queued_cmd *qc) { - return ATA_DRDY; + return AC_ERR_SYSTEM; } -static unsigned int ata_dummy_qc_issue(struct ata_queued_cmd *qc) +static void ata_dummy_error_handler(struct ata_port *ap) { - return AC_ERR_SYSTEM; + /* truly dummy */ } -const struct ata_port_operations ata_dummy_port_ops = { - .check_status = ata_dummy_check_status, - .check_altstatus = ata_dummy_check_status, - .dev_select = ata_noop_dev_select, +struct ata_port_operations ata_dummy_port_ops = { .qc_prep = ata_noop_qc_prep, .qc_issue = ata_dummy_qc_issue, - .freeze = ata_dummy_noret, - .thaw = ata_dummy_noret, - .error_handler = ata_dummy_noret, - .post_internal_cmd = ata_dummy_qc_noret, - .irq_clear = ata_dummy_noret, - .port_start = ata_dummy_ret0, - .port_stop = ata_dummy_noret, + .error_handler = ata_dummy_error_handler, }; const struct ata_port_info ata_dummy_port_info = { @@ -7791,10 +6193,11 @@ const struct ata_port_info ata_dummy_port_info = { EXPORT_SYMBOL_GPL(sata_deb_timing_normal); EXPORT_SYMBOL_GPL(sata_deb_timing_hotplug); EXPORT_SYMBOL_GPL(sata_deb_timing_long); +EXPORT_SYMBOL_GPL(ata_base_port_ops); +EXPORT_SYMBOL_GPL(sata_port_ops); EXPORT_SYMBOL_GPL(ata_dummy_port_ops); EXPORT_SYMBOL_GPL(ata_dummy_port_info); EXPORT_SYMBOL_GPL(ata_std_bios_param); -EXPORT_SYMBOL_GPL(ata_std_ports); EXPORT_SYMBOL_GPL(ata_host_init); EXPORT_SYMBOL_GPL(ata_host_alloc); EXPORT_SYMBOL_GPL(ata_host_alloc_pinfo); @@ -7803,15 +6206,8 @@ EXPORT_SYMBOL_GPL(ata_host_register); EXPORT_SYMBOL_GPL(ata_host_activate); EXPORT_SYMBOL_GPL(ata_host_detach); EXPORT_SYMBOL_GPL(ata_sg_init); -EXPORT_SYMBOL_GPL(ata_hsm_move); EXPORT_SYMBOL_GPL(ata_qc_complete); EXPORT_SYMBOL_GPL(ata_qc_complete_multiple); -EXPORT_SYMBOL_GPL(ata_qc_issue_prot); -EXPORT_SYMBOL_GPL(ata_tf_load); -EXPORT_SYMBOL_GPL(ata_tf_read); -EXPORT_SYMBOL_GPL(ata_noop_dev_select); -EXPORT_SYMBOL_GPL(ata_std_dev_select); -EXPORT_SYMBOL_GPL(sata_print_link_status); EXPORT_SYMBOL_GPL(atapi_cmd_type); EXPORT_SYMBOL_GPL(ata_tf_to_fis); EXPORT_SYMBOL_GPL(ata_tf_from_fis); @@ -7822,37 +6218,17 @@ EXPORT_SYMBOL_GPL(ata_xfer_mode2mask); EXPORT_SYMBOL_GPL(ata_xfer_mode2shift); EXPORT_SYMBOL_GPL(ata_mode_string); EXPORT_SYMBOL_GPL(ata_id_xfermask); -EXPORT_SYMBOL_GPL(ata_check_status); -EXPORT_SYMBOL_GPL(ata_altstatus); -EXPORT_SYMBOL_GPL(ata_exec_command); EXPORT_SYMBOL_GPL(ata_port_start); -EXPORT_SYMBOL_GPL(ata_sff_port_start); -EXPORT_SYMBOL_GPL(ata_interrupt); EXPORT_SYMBOL_GPL(ata_do_set_mode); -EXPORT_SYMBOL_GPL(ata_data_xfer); -EXPORT_SYMBOL_GPL(ata_data_xfer_noirq); EXPORT_SYMBOL_GPL(ata_std_qc_defer); -EXPORT_SYMBOL_GPL(ata_qc_prep); -EXPORT_SYMBOL_GPL(ata_dumb_qc_prep); EXPORT_SYMBOL_GPL(ata_noop_qc_prep); -EXPORT_SYMBOL_GPL(ata_bmdma_setup); -EXPORT_SYMBOL_GPL(ata_bmdma_start); -EXPORT_SYMBOL_GPL(ata_bmdma_irq_clear); -EXPORT_SYMBOL_GPL(ata_bmdma_status); -EXPORT_SYMBOL_GPL(ata_bmdma_stop); -EXPORT_SYMBOL_GPL(ata_bmdma_freeze); -EXPORT_SYMBOL_GPL(ata_bmdma_thaw); -EXPORT_SYMBOL_GPL(ata_bmdma_drive_eh); -EXPORT_SYMBOL_GPL(ata_bmdma_error_handler); -EXPORT_SYMBOL_GPL(ata_bmdma_post_internal_cmd); EXPORT_SYMBOL_GPL(ata_port_probe); EXPORT_SYMBOL_GPL(ata_dev_disable); EXPORT_SYMBOL_GPL(sata_set_spd); +EXPORT_SYMBOL_GPL(ata_wait_after_reset); EXPORT_SYMBOL_GPL(sata_link_debounce); EXPORT_SYMBOL_GPL(sata_link_resume); -EXPORT_SYMBOL_GPL(ata_bus_reset); EXPORT_SYMBOL_GPL(ata_std_prereset); -EXPORT_SYMBOL_GPL(ata_std_softreset); EXPORT_SYMBOL_GPL(sata_link_hardreset); EXPORT_SYMBOL_GPL(sata_std_hardreset); EXPORT_SYMBOL_GPL(ata_std_postreset); @@ -7861,15 +6237,11 @@ EXPORT_SYMBOL_GPL(ata_dev_pair); EXPORT_SYMBOL_GPL(ata_port_disable); EXPORT_SYMBOL_GPL(ata_ratelimit); EXPORT_SYMBOL_GPL(ata_wait_register); -EXPORT_SYMBOL_GPL(ata_busy_sleep); -EXPORT_SYMBOL_GPL(ata_wait_after_reset); -EXPORT_SYMBOL_GPL(ata_wait_ready); EXPORT_SYMBOL_GPL(ata_scsi_ioctl); EXPORT_SYMBOL_GPL(ata_scsi_queuecmd); EXPORT_SYMBOL_GPL(ata_scsi_slave_config); EXPORT_SYMBOL_GPL(ata_scsi_slave_destroy); EXPORT_SYMBOL_GPL(ata_scsi_change_queue_depth); -EXPORT_SYMBOL_GPL(ata_host_intr); EXPORT_SYMBOL_GPL(sata_scr_valid); EXPORT_SYMBOL_GPL(sata_scr_read); EXPORT_SYMBOL_GPL(sata_scr_write); @@ -7892,11 +6264,6 @@ EXPORT_SYMBOL_GPL(ata_timing_cycle2mode); #ifdef CONFIG_PCI EXPORT_SYMBOL_GPL(pci_test_config_bits); -EXPORT_SYMBOL_GPL(ata_pci_init_sff_host); -EXPORT_SYMBOL_GPL(ata_pci_init_bmdma); -EXPORT_SYMBOL_GPL(ata_pci_prepare_sff_host); -EXPORT_SYMBOL_GPL(ata_pci_activate_sff_host); -EXPORT_SYMBOL_GPL(ata_pci_init_one); EXPORT_SYMBOL_GPL(ata_pci_remove_one); #ifdef CONFIG_PM EXPORT_SYMBOL_GPL(ata_pci_device_do_suspend); @@ -7904,16 +6271,8 @@ EXPORT_SYMBOL_GPL(ata_pci_device_do_resume); EXPORT_SYMBOL_GPL(ata_pci_device_suspend); EXPORT_SYMBOL_GPL(ata_pci_device_resume); #endif /* CONFIG_PM */ -EXPORT_SYMBOL_GPL(ata_pci_default_filter); -EXPORT_SYMBOL_GPL(ata_pci_clear_simplex); #endif /* CONFIG_PCI */ -EXPORT_SYMBOL_GPL(sata_pmp_qc_defer_cmd_switch); -EXPORT_SYMBOL_GPL(sata_pmp_std_prereset); -EXPORT_SYMBOL_GPL(sata_pmp_std_hardreset); -EXPORT_SYMBOL_GPL(sata_pmp_std_postreset); -EXPORT_SYMBOL_GPL(sata_pmp_do_eh); - EXPORT_SYMBOL_GPL(__ata_ehi_push_desc); EXPORT_SYMBOL_GPL(ata_ehi_push_desc); EXPORT_SYMBOL_GPL(ata_ehi_clear_desc); @@ -7931,8 +6290,7 @@ EXPORT_SYMBOL_GPL(ata_eh_thaw_port); EXPORT_SYMBOL_GPL(ata_eh_qc_complete); EXPORT_SYMBOL_GPL(ata_eh_qc_retry); EXPORT_SYMBOL_GPL(ata_do_eh); -EXPORT_SYMBOL_GPL(ata_irq_on); -EXPORT_SYMBOL_GPL(ata_dev_try_classify); +EXPORT_SYMBOL_GPL(ata_std_error_handler); EXPORT_SYMBOL_GPL(ata_cable_40wire); EXPORT_SYMBOL_GPL(ata_cable_80wire); |