diff options
Diffstat (limited to 'drivers/ata/libata-core.c')
| -rw-r--r-- | drivers/ata/libata-core.c | 389 |
1 files changed, 169 insertions, 220 deletions
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 932eaee5024..7f77c67d267 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -68,7 +68,7 @@ #include <linux/ratelimit.h> #include "libata.h" - +#include "libata-transport.h" /* debounce timing parameters in msecs { interval, duration, timeout } */ const unsigned long sata_deb_timing_normal[] = { 5, 100, 2000 }; @@ -91,8 +91,6 @@ const struct ata_port_operations sata_port_ops = { static unsigned int ata_dev_init_params(struct ata_device *dev, u16 heads, u16 sectors); static unsigned int ata_dev_set_xfermode(struct ata_device *dev); -static unsigned int ata_dev_set_feature(struct ata_device *dev, - u8 enable, u8 feature); static void ata_dev_xfermask(struct ata_device *dev); static unsigned long ata_dev_blacklisted(const struct ata_device *dev); @@ -1017,7 +1015,7 @@ const char *ata_mode_string(unsigned long xfer_mask) return "<n/a>"; } -static const char *sata_spd_string(unsigned int spd) +const char *sata_spd_string(unsigned int spd) { static const char * const spd_str[] = { "1.5 Gbps", @@ -1030,182 +1028,6 @@ static const char *sata_spd_string(unsigned int spd) return spd_str[spd - 1]; } -static int ata_dev_set_dipm(struct ata_device *dev, enum link_pm policy) -{ - struct ata_link *link = dev->link; - struct ata_port *ap = link->ap; - u32 scontrol; - unsigned int err_mask; - int rc; - - /* - * disallow DIPM for drivers which haven't set - * ATA_FLAG_IPM. This is because when DIPM is enabled, - * phy ready will be set in the interrupt status on - * state changes, which will cause some drivers to - * think there are errors - additionally drivers will - * need to disable hot plug. - */ - if (!(ap->flags & ATA_FLAG_IPM) || !ata_dev_enabled(dev)) { - ap->pm_policy = NOT_AVAILABLE; - return -EINVAL; - } - - /* - * For DIPM, we will only enable it for the - * min_power setting. - * - * Why? Because Disks are too stupid to know that - * If the host rejects a request to go to SLUMBER - * they should retry at PARTIAL, and instead it - * just would give up. So, for medium_power to - * work at all, we need to only allow HIPM. - */ - rc = sata_scr_read(link, SCR_CONTROL, &scontrol); - if (rc) - return rc; - - switch (policy) { - case MIN_POWER: - /* no restrictions on IPM transitions */ - scontrol &= ~(0x3 << 8); - rc = sata_scr_write(link, SCR_CONTROL, scontrol); - if (rc) - return rc; - - /* enable DIPM */ - if (dev->flags & ATA_DFLAG_DIPM) - err_mask = ata_dev_set_feature(dev, - SETFEATURES_SATA_ENABLE, SATA_DIPM); - break; - case MEDIUM_POWER: - /* allow IPM to PARTIAL */ - scontrol &= ~(0x1 << 8); - scontrol |= (0x2 << 8); - rc = sata_scr_write(link, SCR_CONTROL, scontrol); - if (rc) - return rc; - - /* - * we don't have to disable DIPM since IPM flags - * disallow transitions to SLUMBER, which effectively - * disable DIPM if it does not support PARTIAL - */ - break; - case NOT_AVAILABLE: - case MAX_PERFORMANCE: - /* disable all IPM transitions */ - scontrol |= (0x3 << 8); - rc = sata_scr_write(link, SCR_CONTROL, scontrol); - if (rc) - return rc; - - /* - * we don't have to disable DIPM since IPM flags - * disallow all transitions which effectively - * disable DIPM anyway. - */ - break; - } - - /* FIXME: handle SET FEATURES failure */ - (void) err_mask; - - return 0; -} - -/** - * ata_dev_enable_pm - enable SATA interface power management - * @dev: device to enable power management - * @policy: the link power management policy - * - * Enable SATA Interface power management. This will enable - * Device Interface Power Management (DIPM) for min_power - * policy, and then call driver specific callbacks for - * enabling Host Initiated Power management. - * - * Locking: Caller. - * Returns: -EINVAL if IPM is not supported, 0 otherwise. - */ -void ata_dev_enable_pm(struct ata_device *dev, enum link_pm policy) -{ - int rc = 0; - struct ata_port *ap = dev->link->ap; - - /* set HIPM first, then DIPM */ - if (ap->ops->enable_pm) - rc = ap->ops->enable_pm(ap, policy); - if (rc) - goto enable_pm_out; - rc = ata_dev_set_dipm(dev, policy); - -enable_pm_out: - if (rc) - ap->pm_policy = MAX_PERFORMANCE; - else - ap->pm_policy = policy; - return /* rc */; /* hopefully we can use 'rc' eventually */ -} - -#ifdef CONFIG_PM -/** - * ata_dev_disable_pm - disable SATA interface power management - * @dev: device to disable power management - * - * Disable SATA Interface power management. This will disable - * Device Interface Power Management (DIPM) without changing - * policy, call driver specific callbacks for disabling Host - * Initiated Power management. - * - * Locking: Caller. - * Returns: void - */ -static void ata_dev_disable_pm(struct ata_device *dev) -{ - struct ata_port *ap = dev->link->ap; - - ata_dev_set_dipm(dev, MAX_PERFORMANCE); - if (ap->ops->disable_pm) - ap->ops->disable_pm(ap); -} -#endif /* CONFIG_PM */ - -void ata_lpm_schedule(struct ata_port *ap, enum link_pm policy) -{ - ap->pm_policy = policy; - ap->link.eh_info.action |= ATA_EH_LPM; - ap->link.eh_info.flags |= ATA_EHI_NO_AUTOPSY; - ata_port_schedule_eh(ap); -} - -#ifdef CONFIG_PM -static void ata_lpm_enable(struct ata_host *host) -{ - struct ata_link *link; - struct ata_port *ap; - struct ata_device *dev; - int i; - - for (i = 0; i < host->n_ports; i++) { - ap = host->ports[i]; - ata_for_each_link(link, ap, EDGE) { - ata_for_each_dev(dev, link, ALL) - ata_dev_disable_pm(dev); - } - } -} - -static void ata_lpm_disable(struct ata_host *host) -{ - int i; - - for (i = 0; i < host->n_ports; i++) { - struct ata_port *ap = host->ports[i]; - ata_lpm_schedule(ap, ap->pm_policy); - } -} -#endif /* CONFIG_PM */ - /** * ata_dev_classify - determine device type based on ATA-spec signature * @tf: ATA taskfile register set for device to be identified @@ -1806,8 +1628,14 @@ unsigned ata_exec_internal_sg(struct ata_device *dev, } } + if (ap->ops->error_handler) + ata_eh_release(ap); + rc = wait_for_completion_timeout(&wait, msecs_to_jiffies(timeout)); + if (ap->ops->error_handler) + ata_eh_acquire(ap); + ata_sff_flush_pio_task(ap); if (!rc) { @@ -2564,13 +2392,6 @@ int ata_dev_configure(struct ata_device *dev) if (dev->flags & ATA_DFLAG_LBA48) dev->max_sectors = ATA_MAX_SECTORS_LBA48; - if (!(dev->horkage & ATA_HORKAGE_IPM)) { - if (ata_id_has_hipm(dev->id)) - dev->flags |= ATA_DFLAG_HIPM; - if (ata_id_has_dipm(dev->id)) - dev->flags |= ATA_DFLAG_DIPM; - } - /* Limit PATA drive on SATA cable bridge transfers to udma5, 200 sectors */ if (ata_dev_knobble(dev)) { @@ -2591,13 +2412,6 @@ int ata_dev_configure(struct ata_device *dev) dev->max_sectors = min_t(unsigned int, ATA_MAX_SECTORS_128, dev->max_sectors); - if (ata_dev_blacklisted(dev) & ATA_HORKAGE_IPM) { - dev->horkage |= ATA_HORKAGE_IPM; - - /* reset link pm_policy for this port to no pm */ - ap->pm_policy = MAX_PERFORMANCE; - } - if (ap->ops->dev_config) ap->ops->dev_config(dev); @@ -3596,7 +3410,7 @@ int ata_wait_ready(struct ata_link *link, unsigned long deadline, warned = 1; } - msleep(50); + ata_msleep(link->ap, 50); } } @@ -3617,7 +3431,7 @@ int ata_wait_ready(struct ata_link *link, unsigned long deadline, int ata_wait_after_reset(struct ata_link *link, unsigned long deadline, int (*check_ready)(struct ata_link *link)) { - msleep(ATA_WAIT_AFTER_RESET); + ata_msleep(link->ap, ATA_WAIT_AFTER_RESET); return ata_wait_ready(link, deadline, check_ready); } @@ -3628,7 +3442,7 @@ int ata_wait_after_reset(struct ata_link *link, unsigned long deadline, * @params: timing parameters { interval, duratinon, timeout } in msec * @deadline: deadline jiffies for the operation * -* Make sure SStatus of @link reaches stable state, determined by + * Make sure SStatus of @link reaches stable state, determined by * holding the same value where DET is not 1 for @duration polled * every @interval, before @timeout. Timeout constraints the * beginning of the stable state. Because DET gets stuck at 1 on @@ -3665,7 +3479,7 @@ int sata_link_debounce(struct ata_link *link, const unsigned long *params, last_jiffies = jiffies; while (1) { - msleep(interval); + ata_msleep(link->ap, interval); if ((rc = sata_scr_read(link, SCR_STATUS, &cur))) return rc; cur &= 0xf; @@ -3730,7 +3544,7 @@ int sata_link_resume(struct ata_link *link, const unsigned long *params, * immediately after resuming. Delay 200ms before * debouncing. */ - msleep(200); + ata_msleep(link->ap, 200); /* is SControl restored correctly? */ if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol))) @@ -3760,6 +3574,72 @@ int sata_link_resume(struct ata_link *link, const unsigned long *params, } /** + * sata_link_scr_lpm - manipulate SControl IPM and SPM fields + * @link: ATA link to manipulate SControl for + * @policy: LPM policy to configure + * @spm_wakeup: initiate LPM transition to active state + * + * Manipulate the IPM field of the SControl register of @link + * according to @policy. If @policy is ATA_LPM_MAX_POWER and + * @spm_wakeup is %true, the SPM field is manipulated to wake up + * the link. This function also clears PHYRDY_CHG before + * returning. + * + * LOCKING: + * EH context. + * + * RETURNS: + * 0 on succes, -errno otherwise. + */ +int sata_link_scr_lpm(struct ata_link *link, enum ata_lpm_policy policy, + bool spm_wakeup) +{ + struct ata_eh_context *ehc = &link->eh_context; + bool woken_up = false; + u32 scontrol; + int rc; + + rc = sata_scr_read(link, SCR_CONTROL, &scontrol); + if (rc) + return rc; + + switch (policy) { + case ATA_LPM_MAX_POWER: + /* disable all LPM transitions */ + scontrol |= (0x3 << 8); + /* initiate transition to active state */ + if (spm_wakeup) { + scontrol |= (0x4 << 12); + woken_up = true; + } + break; + case ATA_LPM_MED_POWER: + /* allow LPM to PARTIAL */ + scontrol &= ~(0x1 << 8); + scontrol |= (0x2 << 8); + break; + case ATA_LPM_MIN_POWER: + /* no restrictions on LPM transitions */ + scontrol &= ~(0x3 << 8); + break; + default: + WARN_ON(1); + } + + rc = sata_scr_write(link, SCR_CONTROL, scontrol); + if (rc) + return rc; + + /* give the link time to transit out of LPM state */ + if (woken_up) + msleep(10); + + /* clear PHYRDY_CHG from SError */ + ehc->i.serror &= ~SERR_PHYRDY_CHG; + return sata_scr_write(link, SCR_ERROR, SERR_PHYRDY_CHG); +} + +/** * ata_std_prereset - prepare for reset * @link: ATA link to be reset * @deadline: deadline jiffies for the operation @@ -3868,7 +3748,7 @@ int sata_link_hardreset(struct ata_link *link, const unsigned long *timing, /* Couldn't find anything in SATA I/II specs, but AHCI-1.1 * 10.4.2 says at least 1 ms. */ - msleep(1); + ata_msleep(link->ap, 1); /* bring link back */ rc = sata_link_resume(link, timing, deadline); @@ -4551,6 +4431,7 @@ static unsigned int ata_dev_set_xfermode(struct ata_device *dev) DPRINTK("EXIT, err_mask=%x\n", err_mask); return err_mask; } + /** * ata_dev_set_feature - Issue SET FEATURES - SATA FEATURES * @dev: Device to which command will be sent @@ -4566,8 +4447,7 @@ static unsigned int ata_dev_set_xfermode(struct ata_device *dev) * RETURNS: * 0 on success, AC_ERR_* mask otherwise. */ -static unsigned int ata_dev_set_feature(struct ata_device *dev, u8 enable, - u8 feature) +unsigned int ata_dev_set_feature(struct ata_device *dev, u8 enable, u8 feature) { struct ata_taskfile tf; unsigned int err_mask; @@ -4943,8 +4823,13 @@ static void ata_verify_xfer(struct ata_queued_cmd *qc) * ata_qc_complete - Complete an active ATA command * @qc: Command to complete * - * Indicate to the mid and upper layers that an ATA - * command has completed, with either an ok or not-ok status. + * Indicate to the mid and upper layers that an ATA command has + * completed, with either an ok or not-ok status. + * + * Refrain from calling this function multiple times when + * successfully completing multiple NCQ commands. + * ata_qc_complete_multiple() should be used instead, which will + * properly update IRQ expect state. * * LOCKING: * spin_lock_irqsave(host lock) @@ -5037,6 +4922,10 @@ void ata_qc_complete(struct ata_queued_cmd *qc) * requests normally. ap->qc_active and @qc_active is compared * and commands are completed accordingly. * + * Always use this function when completing multiple NCQ commands + * from IRQ handlers instead of calling ata_qc_complete() + * multiple times to keep IRQ expect status properly in sync. + * * LOCKING: * spin_lock_irqsave(host lock) * @@ -5422,12 +5311,6 @@ int ata_host_suspend(struct ata_host *host, pm_message_t mesg) int rc; /* - * disable link pm on all ports before requesting - * any pm activity - */ - ata_lpm_enable(host); - - /* * On some hardware, device fails to respond after spun down * for suspend. As the device won't be used before being * resumed, we don't need to touch the device. Ask EH to skip @@ -5460,9 +5343,6 @@ void ata_host_resume(struct ata_host *host) ata_host_request_pm(host, PMSG_ON, ATA_EH_RESET, ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET, 0); host->dev->power.power_state = PMSG_ON; - - /* reenable link pm */ - ata_lpm_disable(host); } #endif @@ -5517,7 +5397,8 @@ void ata_link_init(struct ata_port *ap, struct ata_link *link, int pmp) int i; /* clear everything except for devices */ - memset(link, 0, offsetof(struct ata_link, device[0])); + memset((void *)link + ATA_LINK_CLEAR_BEGIN, 0, + ATA_LINK_CLEAR_END - ATA_LINK_CLEAR_BEGIN); link->ap = ap; link->pmp = pmp; @@ -5591,7 +5472,7 @@ struct ata_port *ata_port_alloc(struct ata_host *host) ap = kzalloc(sizeof(*ap), GFP_KERNEL); if (!ap) return NULL; - + ap->pflags |= ATA_PFLAG_INITIALIZING; ap->lock = &host->lock; ap->print_id = -1; @@ -5695,6 +5576,7 @@ struct ata_host *ata_host_alloc(struct device *dev, int max_ports) dev_set_drvdata(dev, host); spin_lock_init(&host->lock); + mutex_init(&host->eh_mutex); host->dev = dev; host->n_ports = max_ports; @@ -5992,6 +5874,7 @@ void ata_host_init(struct ata_host *host, struct device *dev, unsigned long flags, struct ata_port_operations *ops) { spin_lock_init(&host->lock); + mutex_init(&host->eh_mutex); host->dev = dev; host->flags = flags; host->ops = ops; @@ -6022,7 +5905,7 @@ static void async_port_probe(void *data, async_cookie_t cookie) spin_lock_irqsave(ap->lock, flags); ehi->probe_mask |= ATA_ALL_DEVICES; - ehi->action |= ATA_EH_RESET | ATA_EH_LPM; + ehi->action |= ATA_EH_RESET; ehi->flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET; ap->pflags &= ~ATA_PFLAG_INITIALIZING; @@ -6093,9 +5976,18 @@ int ata_host_register(struct ata_host *host, struct scsi_host_template *sht) for (i = 0; i < host->n_ports; i++) host->ports[i]->print_id = ata_print_id++; + + /* Create associated sysfs transport objects */ + for (i = 0; i < host->n_ports; i++) { + rc = ata_tport_add(host->dev,host->ports[i]); + if (rc) { + goto err_tadd; + } + } + rc = ata_scsi_add_hosts(host, sht); if (rc) - return rc; + goto err_tadd; /* associate with ACPI nodes */ ata_acpi_associate(host); @@ -6136,6 +6028,13 @@ int ata_host_register(struct ata_host *host, struct scsi_host_template *sht) } return 0; + + err_tadd: + while (--i >= 0) { + ata_tport_delete(host->ports[i]); + } + return rc; + } /** @@ -6226,6 +6125,13 @@ static void ata_port_detach(struct ata_port *ap) cancel_rearming_delayed_work(&ap->hotplug_task); skip_eh: + if (ap->pmp_link) { + int i; + for (i = 0; i < SATA_PMP_MAX_PORTS; i++) + ata_tlink_delete(&ap->pmp_link[i]); + } + ata_tport_delete(ap); + /* remove the associated SCSI host */ scsi_remove_host(ap->scsi_host); } @@ -6542,7 +6448,7 @@ static void __init ata_parse_force_param(void) static int __init ata_init(void) { - int rc = -ENOMEM; + int rc; ata_parse_force_param(); @@ -6552,12 +6458,25 @@ static int __init ata_init(void) return rc; } + libata_transport_init(); + ata_scsi_transport_template = ata_attach_transport(); + if (!ata_scsi_transport_template) { + ata_sff_exit(); + rc = -ENOMEM; + goto err_out; + } + printk(KERN_DEBUG "libata version " DRV_VERSION " loaded.\n"); return 0; + +err_out: + return rc; } static void __exit ata_exit(void) { + ata_release_transport(ata_scsi_transport_template); + libata_transport_exit(); ata_sff_exit(); kfree(ata_force_tbl); } @@ -6573,7 +6492,35 @@ int ata_ratelimit(void) } /** + * ata_msleep - ATA EH owner aware msleep + * @ap: ATA port to attribute the sleep to + * @msecs: duration to sleep in milliseconds + * + * Sleeps @msecs. If the current task is owner of @ap's EH, the + * ownership is released before going to sleep and reacquired + * after the sleep is complete. IOW, other ports sharing the + * @ap->host will be allowed to own the EH while this task is + * sleeping. + * + * LOCKING: + * Might sleep. + */ +void ata_msleep(struct ata_port *ap, unsigned int msecs) +{ + bool owns_eh = ap && ap->host->eh_owner == current; + + if (owns_eh) + ata_eh_release(ap); + + msleep(msecs); + + if (owns_eh) + ata_eh_acquire(ap); +} + +/** * ata_wait_register - wait until register value changes + * @ap: ATA port to wait register for, can be NULL * @reg: IO-mapped register * @mask: Mask to apply to read register value * @val: Wait condition @@ -6595,7 +6542,7 @@ int ata_ratelimit(void) * RETURNS: * The final register value. */ -u32 ata_wait_register(void __iomem *reg, u32 mask, u32 val, +u32 ata_wait_register(struct ata_port *ap, void __iomem *reg, u32 mask, u32 val, unsigned long interval, unsigned long timeout) { unsigned long deadline; @@ -6610,7 +6557,7 @@ u32 ata_wait_register(void __iomem *reg, u32 mask, u32 val, deadline = ata_deadline(jiffies, timeout); while ((tmp & mask) == val && time_before(jiffies, deadline)) { - msleep(interval); + ata_msleep(ap, interval); tmp = ioread32(reg); } @@ -6686,6 +6633,7 @@ EXPORT_SYMBOL_GPL(sata_set_spd); EXPORT_SYMBOL_GPL(ata_wait_after_reset); EXPORT_SYMBOL_GPL(sata_link_debounce); EXPORT_SYMBOL_GPL(sata_link_resume); +EXPORT_SYMBOL_GPL(sata_link_scr_lpm); EXPORT_SYMBOL_GPL(ata_std_prereset); EXPORT_SYMBOL_GPL(sata_link_hardreset); EXPORT_SYMBOL_GPL(sata_std_hardreset); @@ -6693,6 +6641,7 @@ EXPORT_SYMBOL_GPL(ata_std_postreset); EXPORT_SYMBOL_GPL(ata_dev_classify); EXPORT_SYMBOL_GPL(ata_dev_pair); EXPORT_SYMBOL_GPL(ata_ratelimit); +EXPORT_SYMBOL_GPL(ata_msleep); EXPORT_SYMBOL_GPL(ata_wait_register); EXPORT_SYMBOL_GPL(ata_scsi_queuecmd); EXPORT_SYMBOL_GPL(ata_scsi_slave_config); |