diff options
Diffstat (limited to 'drivers/ata/libata-core.c')
| -rw-r--r-- | drivers/ata/libata-core.c | 1061 |
1 files changed, 750 insertions, 311 deletions
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 3c1f8830ac8..ca67484af1e 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -72,7 +72,7 @@ static unsigned int ata_dev_init_params(struct ata_device *dev, static unsigned int ata_dev_set_xfermode(struct ata_device *dev); static void ata_dev_xfermask(struct ata_device *dev); -static unsigned int ata_print_id = 1; +unsigned int ata_print_id = 1; static struct workqueue_struct *ata_wq; struct workqueue_struct *ata_aux_wq; @@ -89,12 +89,16 @@ int libata_fua = 0; module_param_named(fua, libata_fua, int, 0444); MODULE_PARM_DESC(fua, "FUA support (0=off, 1=on)"); +static int ata_ignore_hpa = 0; +module_param_named(ignore_hpa, ata_ignore_hpa, int, 0644); +MODULE_PARM_DESC(ignore_hpa, "Ignore HPA limit (0=keep BIOS limits, 1=ignore limits, using full disk)"); + static int ata_probe_timeout = ATA_TMOUT_INTERNAL / HZ; module_param(ata_probe_timeout, int, 0444); MODULE_PARM_DESC(ata_probe_timeout, "Set ATA probing timeout (seconds)"); -int noacpi; -module_param(noacpi, int, 0444); +int libata_noacpi = 1; +module_param_named(noacpi, libata_noacpi, int, 0444); MODULE_PARM_DESC(noacpi, "Disables the use of ACPI in suspend/resume when set"); MODULE_AUTHOR("Jeff Garzik"); @@ -808,6 +812,205 @@ void ata_id_c_string(const u16 *id, unsigned char *s, *p = '\0'; } +static u64 ata_tf_to_lba48(struct ata_taskfile *tf) +{ + u64 sectors = 0; + + sectors |= ((u64)(tf->hob_lbah & 0xff)) << 40; + sectors |= ((u64)(tf->hob_lbam & 0xff)) << 32; + sectors |= (tf->hob_lbal & 0xff) << 24; + sectors |= (tf->lbah & 0xff) << 16; + sectors |= (tf->lbam & 0xff) << 8; + sectors |= (tf->lbal & 0xff); + + return ++sectors; +} + +static u64 ata_tf_to_lba(struct ata_taskfile *tf) +{ + u64 sectors = 0; + + sectors |= (tf->device & 0x0f) << 24; + sectors |= (tf->lbah & 0xff) << 16; + sectors |= (tf->lbam & 0xff) << 8; + sectors |= (tf->lbal & 0xff); + + return ++sectors; +} + +/** + * ata_read_native_max_address_ext - LBA48 native max query + * @dev: Device to query + * + * Perform an LBA48 size query upon the device in question. Return the + * actual LBA48 size or zero if the command fails. + */ + +static u64 ata_read_native_max_address_ext(struct ata_device *dev) +{ + unsigned int err; + struct ata_taskfile tf; + + ata_tf_init(dev, &tf); + + tf.command = ATA_CMD_READ_NATIVE_MAX_EXT; + tf.flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_LBA48 | ATA_TFLAG_ISADDR; + tf.protocol |= ATA_PROT_NODATA; + tf.device |= 0x40; + + err = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0); + if (err) + return 0; + + return ata_tf_to_lba48(&tf); +} + +/** + * ata_read_native_max_address - LBA28 native max query + * @dev: Device to query + * + * Performa an LBA28 size query upon the device in question. Return the + * actual LBA28 size or zero if the command fails. + */ + +static u64 ata_read_native_max_address(struct ata_device *dev) +{ + unsigned int err; + struct ata_taskfile tf; + + ata_tf_init(dev, &tf); + + tf.command = ATA_CMD_READ_NATIVE_MAX; + tf.flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR; + tf.protocol |= ATA_PROT_NODATA; + tf.device |= 0x40; + + err = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0); + if (err) + return 0; + + return ata_tf_to_lba(&tf); +} + +/** + * ata_set_native_max_address_ext - LBA48 native max set + * @dev: Device to query + * + * Perform an LBA48 size set max upon the device in question. Return the + * actual LBA48 size or zero if the command fails. + */ + +static u64 ata_set_native_max_address_ext(struct ata_device *dev, u64 new_sectors) +{ + unsigned int err; + struct ata_taskfile tf; + + new_sectors--; + + ata_tf_init(dev, &tf); + + tf.command = ATA_CMD_SET_MAX_EXT; + tf.flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_LBA48 | ATA_TFLAG_ISADDR; + tf.protocol |= ATA_PROT_NODATA; + tf.device |= 0x40; + + tf.lbal = (new_sectors >> 0) & 0xff; + tf.lbam = (new_sectors >> 8) & 0xff; + tf.lbah = (new_sectors >> 16) & 0xff; + + tf.hob_lbal = (new_sectors >> 24) & 0xff; + tf.hob_lbam = (new_sectors >> 32) & 0xff; + tf.hob_lbah = (new_sectors >> 40) & 0xff; + + err = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0); + if (err) + return 0; + + return ata_tf_to_lba48(&tf); +} + +/** + * ata_set_native_max_address - LBA28 native max set + * @dev: Device to query + * + * Perform an LBA28 size set max upon the device in question. Return the + * actual LBA28 size or zero if the command fails. + */ + +static u64 ata_set_native_max_address(struct ata_device *dev, u64 new_sectors) +{ + unsigned int err; + struct ata_taskfile tf; + + new_sectors--; + + ata_tf_init(dev, &tf); + + tf.command = ATA_CMD_SET_MAX; + tf.flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR; + tf.protocol |= ATA_PROT_NODATA; + + tf.lbal = (new_sectors >> 0) & 0xff; + tf.lbam = (new_sectors >> 8) & 0xff; + tf.lbah = (new_sectors >> 16) & 0xff; + tf.device |= ((new_sectors >> 24) & 0x0f) | 0x40; + + err = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0); + if (err) + return 0; + + return ata_tf_to_lba(&tf); +} + +/** + * ata_hpa_resize - Resize a device with an HPA set + * @dev: Device to resize + * + * Read the size of an LBA28 or LBA48 disk with HPA features and resize + * it if required to the full size of the media. The caller must check + * the drive has the HPA feature set enabled. + */ + +static u64 ata_hpa_resize(struct ata_device *dev) +{ + u64 sectors = dev->n_sectors; + u64 hpa_sectors; + + if (ata_id_has_lba48(dev->id)) + hpa_sectors = ata_read_native_max_address_ext(dev); + else + hpa_sectors = ata_read_native_max_address(dev); + + /* if no hpa, both should be equal */ + ata_dev_printk(dev, KERN_INFO, "%s 1: sectors = %lld, " + "hpa_sectors = %lld\n", + __FUNCTION__, (long long)sectors, (long long)hpa_sectors); + + if (hpa_sectors > sectors) { + ata_dev_printk(dev, KERN_INFO, + "Host Protected Area detected:\n" + "\tcurrent size: %lld sectors\n" + "\tnative size: %lld sectors\n", + (long long)sectors, (long long)hpa_sectors); + + if (ata_ignore_hpa) { + if (ata_id_has_lba48(dev->id)) + hpa_sectors = ata_set_native_max_address_ext(dev, hpa_sectors); + else + hpa_sectors = ata_set_native_max_address(dev, + hpa_sectors); + + if (hpa_sectors) { + ata_dev_printk(dev, KERN_INFO, "native size " + "increased to %lld sectors\n", + (long long)hpa_sectors); + return hpa_sectors; + } + } + } + return sectors; +} + static u64 ata_id_n_sectors(const u16 *id) { if (ata_id_has_lba(id)) { @@ -826,7 +1029,7 @@ static u64 ata_id_n_sectors(const u16 *id) /** * ata_id_to_dma_mode - Identify DMA mode from id block * @dev: device to identify - * @mode: mode to assume if we cannot tell + * @unknown: mode to assume if we cannot tell * * Set up the timing values for the device based upon the identify * reported values for the DMA mode. This function is used by drivers @@ -1270,12 +1473,16 @@ unsigned ata_exec_internal_sg(struct ata_device *dev, if (ap->ops->post_internal_cmd) ap->ops->post_internal_cmd(qc); - if ((qc->flags & ATA_QCFLAG_FAILED) && !qc->err_mask) { - if (ata_msg_warn(ap)) - ata_dev_printk(dev, KERN_WARNING, - "zero err_mask for failed " - "internal command, assuming AC_ERR_OTHER\n"); - qc->err_mask |= AC_ERR_OTHER; + /* perform minimal error analysis */ + if (qc->flags & ATA_QCFLAG_FAILED) { + if (qc->result_tf.command & (ATA_ERR | ATA_DF)) + qc->err_mask |= AC_ERR_DEV; + + if (!qc->err_mask) + qc->err_mask |= AC_ERR_OTHER; + + if (qc->err_mask & ~AC_ERR_OTHER) + qc->err_mask &= ~AC_ERR_OTHER; } /* finish up */ @@ -1379,30 +1586,44 @@ unsigned int ata_do_simple_cmd(struct ata_device *dev, u8 cmd) * Check if the current speed of the device requires IORDY. Used * by various controllers for chip configuration. */ - + unsigned int ata_pio_need_iordy(const struct ata_device *adev) { - int pio; - int speed = adev->pio_mode - XFER_PIO_0; - - if (speed < 2) + /* Controller doesn't support IORDY. Probably a pointless check + as the caller should know this */ + if (adev->ap->flags & ATA_FLAG_NO_IORDY) return 0; - if (speed > 2) + /* PIO3 and higher it is mandatory */ + if (adev->pio_mode > XFER_PIO_2) + return 1; + /* We turn it on when possible */ + if (ata_id_has_iordy(adev->id)) return 1; + return 0; +} +/** + * ata_pio_mask_no_iordy - Return the non IORDY mask + * @adev: ATA device + * + * Compute the highest mode possible if we are not using iordy. Return + * -1 if no iordy mode is available. + */ + +static u32 ata_pio_mask_no_iordy(const struct ata_device *adev) +{ /* If we have no drive specific rule, then PIO 2 is non IORDY */ - if (adev->id[ATA_ID_FIELD_VALID] & 2) { /* EIDE */ - pio = adev->id[ATA_ID_EIDE_PIO]; + u16 pio = adev->id[ATA_ID_EIDE_PIO]; /* Is the speed faster than the drive allows non IORDY ? */ if (pio) { /* This is cycle times not frequency - watch the logic! */ if (pio > 240) /* PIO2 is 240nS per cycle */ - return 1; - return 0; + return 3 << ATA_SHIFT_PIO; + return 7 << ATA_SHIFT_PIO; } } - return 0; + return 3 << ATA_SHIFT_PIO; } /** @@ -1431,13 +1652,13 @@ int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class, struct ata_taskfile tf; unsigned int err_mask = 0; const char *reason; + int tried_spinup = 0; int rc; if (ata_msg_ctl(ap)) ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER\n", __FUNCTION__); ata_dev_select(ap, dev->devno, 1, 1); /* select device 0/1 */ - retry: ata_tf_init(dev, &tf); @@ -1494,6 +1715,32 @@ int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class, goto err_out; } + if (!tried_spinup && (id[2] == 0x37c8 || id[2] == 0x738c)) { + tried_spinup = 1; + /* + * Drive powered-up in standby mode, and requires a specific + * SET_FEATURES spin-up subcommand before it will accept + * anything other than the original IDENTIFY command. + */ + ata_tf_init(dev, &tf); + tf.command = ATA_CMD_SET_FEATURES; + tf.feature = SETFEATURES_SPINUP; + tf.protocol = ATA_PROT_NODATA; + tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; + err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0); + if (err_mask) { + rc = -EIO; + reason = "SPINUP failed"; + goto err_out; + } + /* + * If the drive initially returned incomplete IDENTIFY info, + * we now must reissue the IDENTIFY command. + */ + if (id[2] == 0x37c8) + goto retry; + } + if ((flags & ATA_READID_POSTRESET) && class == ATA_DEV_ATA) { /* * The exact sequence expected by certain pre-ATA4 drives is: @@ -1560,20 +1807,6 @@ static void ata_dev_config_ncq(struct ata_device *dev, snprintf(desc, desc_sz, "NCQ (depth %d/%d)", hdepth, ddepth); } -static void ata_set_port_max_cmd_len(struct ata_port *ap) -{ - int i; - - if (ap->scsi_host) { - unsigned int len = 0; - - for (i = 0; i < ATA_MAX_DEVICES; i++) - len = max(len, ap->device[i].cdb_len); - - ap->scsi_host->max_cmd_len = len; - } -} - /** * ata_dev_configure - Configure the specified ATA/ATAPI device * @dev: Target device to configure @@ -1658,6 +1891,7 @@ int ata_dev_configure(struct ata_device *dev) snprintf(revbuf, 7, "ATA-%d", ata_id_major_version(id)); dev->n_sectors = ata_id_n_sectors(id); + dev->n_sectors_boot = dev->n_sectors; /* SCSI only uses 4-char revisions, dump full 8 chars from ATA */ ata_id_c_string(dev->id, fwrevbuf, ATA_ID_FW_REV, @@ -1684,6 +1918,9 @@ int ata_dev_configure(struct ata_device *dev) dev->flags |= ATA_DFLAG_FLUSH_EXT; } + if (ata_id_hpa_enabled(dev->id)) + dev->n_sectors = ata_hpa_resize(dev); + /* config NCQ */ ata_dev_config_ncq(dev, ncq_desc, sizeof(ncq_desc)); @@ -1773,8 +2010,6 @@ int ata_dev_configure(struct ata_device *dev) } } - ata_set_port_max_cmd_len(ap); - /* limit bridge transfers to udma5, 200 sectors */ if (ata_dev_knobble(dev)) { if (ata_msg_drv(ap) && print_info) @@ -1784,8 +2019,16 @@ int ata_dev_configure(struct ata_device *dev) dev->max_sectors = ATA_MAX_SECTORS; } + if (ata_device_blacklisted(dev) & ATA_HORKAGE_MAX_SEC_128) + dev->max_sectors = min_t(unsigned int, ATA_MAX_SECTORS_128, + dev->max_sectors); + + /* limit ATAPI DMA to R/W commands only */ + if (ata_device_blacklisted(dev) & ATA_HORKAGE_DMA_RW_ONLY) + dev->horkage |= ATA_HORKAGE_DMA_RW_ONLY; + if (ap->ops->dev_config) - ap->ops->dev_config(ap, dev); + ap->ops->dev_config(dev); if (ata_msg_probe(ap)) ata_dev_printk(dev, KERN_DEBUG, "%s: EXIT, drv_stat = 0x%x\n", @@ -1800,6 +2043,56 @@ err_out_nosup: } /** + * ata_cable_40wire - return 40 wire cable type + * @ap: port + * + * Helper method for drivers which want to hardwire 40 wire cable + * detection. + */ + +int ata_cable_40wire(struct ata_port *ap) +{ + return ATA_CBL_PATA40; +} + +/** + * ata_cable_80wire - return 80 wire cable type + * @ap: port + * + * Helper method for drivers which want to hardwire 80 wire cable + * detection. + */ + +int ata_cable_80wire(struct ata_port *ap) +{ + return ATA_CBL_PATA80; +} + +/** + * ata_cable_unknown - return unknown PATA cable. + * @ap: port + * + * Helper method for drivers which have no PATA cable detection. + */ + +int ata_cable_unknown(struct ata_port *ap) +{ + return ATA_CBL_PATA_UNK; +} + +/** + * ata_cable_sata - return SATA cable type + * @ap: port + * + * Helper method for drivers which have SATA cables + */ + +int ata_cable_sata(struct ata_port *ap) +{ + return ATA_CBL_SATA; +} + +/** * ata_bus_probe - Reset and probe ATA bus * @ap: Bus to probe * @@ -1869,6 +2162,10 @@ int ata_bus_probe(struct ata_port *ap) goto fail; } + /* Now ask for the cable type as PDIAG- should have been released */ + if (ap->ops->cable_detect) + ap->cbl = ap->ops->cable_detect(ap); + /* After the identify sequence we can now set up the devices. We do this in the normal order so that the user doesn't get confused */ @@ -1951,7 +2248,7 @@ void ata_port_probe(struct ata_port *ap) * LOCKING: * None. */ -static void sata_print_link_status(struct ata_port *ap) +void sata_print_link_status(struct ata_port *ap) { u32 sstatus, scontrol, tmp; @@ -2345,6 +2642,12 @@ int ata_timing_compute(struct ata_device *adev, unsigned short speed, t->active += (t->cycle - (t->active + t->recover)) / 2; t->recover = t->cycle - t->active; } + + /* In a few cases quantisation may produce enough errors to + leave t->cycle too low for the sum of active and recovery + if so we must correct this */ + if (t->active + t->recover > t->cycle) + t->cycle = t->active + t->recover; return 0; } @@ -2474,12 +2777,13 @@ static int ata_dev_set_mode(struct ata_device *dev) } /** - * ata_set_mode - Program timings and issue SET FEATURES - XFER + * ata_do_set_mode - Program timings and issue SET FEATURES - XFER * @ap: port on which timings will be programmed * @r_failed_dev: out paramter for failed device * - * Set ATA device disk transfer mode (PIO3, UDMA6, etc.). If - * ata_set_mode() fails, pointer to the failing device is + * Standard implementation of the function used to tune and set + * ATA device disk transfer mode (PIO3, UDMA6, etc.). If + * ata_dev_set_mode() fails, pointer to the failing device is * returned in @r_failed_dev. * * LOCKING: @@ -2488,14 +2792,12 @@ static int ata_dev_set_mode(struct ata_device *dev) * RETURNS: * 0 on success, negative errno otherwise */ -int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev) + +int ata_do_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev) { struct ata_device *dev; int i, rc = 0, used_dma = 0, found = 0; - /* has private set_mode? */ - if (ap->ops->set_mode) - return ap->ops->set_mode(ap, r_failed_dev); /* step 1: calculate xfer_mask */ for (i = 0; i < ATA_MAX_DEVICES; i++) { @@ -2580,6 +2882,29 @@ int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev) } /** + * ata_set_mode - Program timings and issue SET FEATURES - XFER + * @ap: port on which timings will be programmed + * @r_failed_dev: out paramter for failed device + * + * Set ATA device disk transfer mode (PIO3, UDMA6, etc.). If + * ata_set_mode() fails, pointer to the failing device is + * returned in @r_failed_dev. + * + * LOCKING: + * PCI/etc. bus probe sem. + * + * RETURNS: + * 0 on success, negative errno otherwise + */ +int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev) +{ + /* has private set_mode? */ + if (ap->ops->set_mode) + return ap->ops->set_mode(ap, r_failed_dev); + return ata_do_set_mode(ap, r_failed_dev); +} + +/** * ata_tf_to_host - issue ATA taskfile to host controller * @ap: port to which command is being issued * @tf: ATA taskfile register set @@ -3260,6 +3585,11 @@ static int ata_dev_same_device(struct ata_device *dev, unsigned int new_class, "%llu != %llu\n", (unsigned long long)dev->n_sectors, (unsigned long long)new_n_sectors); + /* Are we the boot time size - if so we appear to be the + same disk at this point and our HPA got reapplied */ + if (ata_ignore_hpa && dev->n_sectors_boot == new_n_sectors + && ata_id_hpa_enabled(new_id)) + return 1; return 0; } @@ -3352,6 +3682,10 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { "_NEC DV5800A", NULL, ATA_HORKAGE_NODMA }, { "SAMSUNG CD-ROM SN-124","N001", ATA_HORKAGE_NODMA }, + /* Weird ATAPI devices */ + { "TORiSAN DVD-ROM DRD-N216", NULL, ATA_HORKAGE_MAX_SEC_128 | + ATA_HORKAGE_DMA_RW_ONLY }, + /* Devices we expect to fail diagnostics */ /* Devices where NCQ should be avoided */ @@ -3359,6 +3693,15 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { "WDC WD740ADFD-00", NULL, ATA_HORKAGE_NONCQ }, /* http://thread.gmane.org/gmane.linux.ide/14907 */ { "FUJITSU MHT2060BH", NULL, ATA_HORKAGE_NONCQ }, + /* NCQ is broken */ + { "Maxtor 6L250S0", "BANC1G10", ATA_HORKAGE_NONCQ }, + /* NCQ hard hangs device under heavier load, needs hard power cycle */ + { "Maxtor 6B250S0", "BANC1B70", ATA_HORKAGE_NONCQ }, + /* Blacklist entries taken from Silicon Image 3124/3132 + Windows driver .inf file - also several Linux problem reports */ + { "HTS541060G9SA00", "MB3OC60D", ATA_HORKAGE_NONCQ, }, + { "HTS541080G9SA00", "MB4OC60D", ATA_HORKAGE_NONCQ, }, + { "HTS541010G9SA00", "MBZOC60D", ATA_HORKAGE_NONCQ, }, /* Devices with NCQ limits */ @@ -3421,19 +3764,7 @@ static void ata_dev_xfermask(struct ata_device *dev) xfer_mask = ata_pack_xfermask(ap->pio_mask, ap->mwdma_mask, ap->udma_mask); - /* Apply cable rule here. Don't apply it early because when - * we handle hot plug the cable type can itself change. - */ - if (ap->cbl == ATA_CBL_PATA40) - xfer_mask &= ~(0xF8 << ATA_SHIFT_UDMA); - /* Apply drive side cable rule. Unknown or 80 pin cables reported - * host side are checked drive side as well. Cases where we know a - * 40wire cable is used safely for 80 are not checked here. - */ - if (ata_drive_40wire(dev->id) && (ap->cbl == ATA_CBL_PATA_UNK || ap->cbl == ATA_CBL_PATA80)) - xfer_mask &= ~(0xF8 << ATA_SHIFT_UDMA); - - + /* drive modes available */ xfer_mask &= ata_pack_xfermask(dev->pio_mask, dev->mwdma_mask, dev->udma_mask); xfer_mask &= ata_id_xfermask(dev->id); @@ -3462,8 +3793,30 @@ static void ata_dev_xfermask(struct ata_device *dev) "other device, disabling DMA\n"); } + if (ap->flags & ATA_FLAG_NO_IORDY) + xfer_mask &= ata_pio_mask_no_iordy(dev); + if (ap->ops->mode_filter) - xfer_mask = ap->ops->mode_filter(ap, dev, xfer_mask); + xfer_mask = ap->ops->mode_filter(dev, xfer_mask); + + /* Apply cable rule here. Don't apply it early because when + * we handle hot plug the cable type can itself change. + * Check this last so that we know if the transfer rate was + * solely limited by the cable. + * Unknown or 80 wire cables reported host side are checked + * drive side as well. Cases where we know a 40wire cable + * is used safely for 80 are not checked here. + */ + if (xfer_mask & (0xF8 << ATA_SHIFT_UDMA)) + /* UDMA/44 or higher would be available */ + if((ap->cbl == ATA_CBL_PATA40) || + (ata_drive_40wire(dev->id) && + (ap->cbl == ATA_CBL_PATA_UNK || + ap->cbl == ATA_CBL_PATA80))) { + ata_dev_printk(dev, KERN_WARNING, + "limited to UDMA/33 due to 40-wire cable\n"); + xfer_mask &= ~(0xF8 << ATA_SHIFT_UDMA); + } ata_unpack_xfermask(xfer_mask, &dev->pio_mask, &dev->mwdma_mask, &dev->udma_mask); @@ -3670,6 +4023,26 @@ int ata_check_atapi_dma(struct ata_queued_cmd *qc) struct ata_port *ap = qc->ap; int rc = 0; /* Assume ATAPI DMA is OK by default */ + /* some drives can only do ATAPI DMA on read/write */ + if (unlikely(qc->dev->horkage & ATA_HORKAGE_DMA_RW_ONLY)) { + struct scsi_cmnd *cmd = qc->scsicmd; + u8 *scsicmd = cmd->cmnd; + + switch (scsicmd[0]) { + case READ_10: + case WRITE_10: + case READ_12: + case WRITE_12: + case READ_6: + case WRITE_6: + /* atapi dma maybe ok */ + break; + default: + /* turn off atapi dma */ + return 1; + } + } + if (ap->ops->check_atapi_dma) rc = ap->ops->check_atapi_dma(qc); @@ -3982,10 +4355,10 @@ void ata_data_xfer_noirq(struct ata_device *adev, unsigned char *buf, /** - * ata_pio_sector - Transfer ATA_SECT_SIZE (512 bytes) of data. + * ata_pio_sector - Transfer a sector of data. * @qc: Command on going * - * Transfer ATA_SECT_SIZE of data from/to the ATA device. + * Transfer qc->sect_size bytes of data from/to the ATA device. * * LOCKING: * Inherited from caller. @@ -4000,7 +4373,7 @@ static void ata_pio_sector(struct ata_queued_cmd *qc) unsigned int offset; unsigned char *buf; - if (qc->curbytes == qc->nbytes - ATA_SECT_SIZE) + if (qc->curbytes == qc->nbytes - qc->sect_size) ap->hsm_task_state = HSM_ST_LAST; page = sg[qc->cursg].page; @@ -4020,17 +4393,17 @@ static void ata_pio_sector(struct ata_queued_cmd *qc) buf = kmap_atomic(page, KM_IRQ0); /* do the actual data transfer */ - ap->ops->data_xfer(qc->dev, buf + offset, ATA_SECT_SIZE, do_write); + ap->ops->data_xfer(qc->dev, buf + offset, qc->sect_size, do_write); kunmap_atomic(buf, KM_IRQ0); local_irq_restore(flags); } else { buf = page_address(page); - ap->ops->data_xfer(qc->dev, buf + offset, ATA_SECT_SIZE, do_write); + ap->ops->data_xfer(qc->dev, buf + offset, qc->sect_size, do_write); } - qc->curbytes += ATA_SECT_SIZE; - qc->cursg_ofs += ATA_SECT_SIZE; + qc->curbytes += qc->sect_size; + qc->cursg_ofs += qc->sect_size; if (qc->cursg_ofs == (&sg[qc->cursg])->length) { qc->cursg++; @@ -4039,10 +4412,10 @@ static void ata_pio_sector(struct ata_queued_cmd *qc) } /** - * ata_pio_sectors - Transfer one or many 512-byte sectors. + * ata_pio_sectors - Transfer one or many sectors. * @qc: Command on going * - * Transfer one or many ATA_SECT_SIZE of data from/to the + * Transfer one or many sectors of data from/to the * ATA device for the DRQ request. * * LOCKING: @@ -4057,7 +4430,7 @@ static void ata_pio_sectors(struct ata_queued_cmd *qc) WARN_ON(qc->dev->multi_count == 0); - nsect = min((qc->nbytes - qc->curbytes) / ATA_SECT_SIZE, + nsect = min((qc->nbytes - qc->curbytes) / qc->sect_size, qc->dev->multi_count); while (nsect--) ata_pio_sector(qc); @@ -4713,8 +5086,8 @@ static void fill_result_tf(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; - ap->ops->tf_read(ap, &qc->result_tf); qc->result_tf.flags = qc->tf.flags; + ap->ops->tf_read(ap, &qc->result_tf); } /** @@ -5537,42 +5910,35 @@ void ata_dev_init(struct ata_device *dev) } /** - * ata_port_init - Initialize an ata_port structure - * @ap: Structure to initialize - * @host: Collection of hosts to which @ap belongs - * @ent: Probe information provided by low-level driver - * @port_no: Port number associated with this ata_port + * ata_port_alloc - allocate and initialize basic ATA port resources + * @host: ATA host this allocated port belongs to + * + * Allocate and initialize basic ATA port resources. * - * Initialize a new ata_port structure. + * RETURNS: + * Allocate ATA port on success, NULL on failure. * * LOCKING: - * Inherited from caller. + * Inherited from calling layer (may sleep). */ -void ata_port_init(struct ata_port *ap, struct ata_host *host, - const struct ata_probe_ent *ent, unsigned int port_no) +struct ata_port *ata_port_alloc(struct ata_host *host) { + struct ata_port *ap; unsigned int i; + DPRINTK("ENTER\n"); + + ap = kzalloc(sizeof(*ap), GFP_KERNEL); + if (!ap) + return NULL; + ap->lock = &host->lock; ap->flags = ATA_FLAG_DISABLED; - ap->print_id = ata_print_id++; + ap->print_id = -1; ap->ctl = ATA_DEVCTL_OBS; ap->host = host; - ap->dev = ent->dev; - ap->port_no = port_no; - if (port_no == 1 && ent->pinfo2) { - ap->pio_mask = ent->pinfo2->pio_mask; - ap->mwdma_mask = ent->pinfo2->mwdma_mask; - ap->udma_mask = ent->pinfo2->udma_mask; - ap->flags |= ent->pinfo2->flags; - ap->ops = ent->pinfo2->port_ops; - } else { - ap->pio_mask = ent->pio_mask; - ap->mwdma_mask = ent->mwdma_mask; - ap->udma_mask = ent->udma_mask; - ap->flags |= ent->port_flags; - ap->ops = ent->port_ops; - } + ap->dev = host->dev; + ap->hw_sata_spd_limit = UINT_MAX; ap->active_tag = ATA_TAG_POISON; ap->last_ctl = 0xFF; @@ -5592,10 +5958,7 @@ void ata_port_init(struct ata_port *ap, struct ata_host *host, INIT_LIST_HEAD(&ap->eh_done_q); init_waitqueue_head(&ap->eh_wait_q); - /* set cable type */ ap->cbl = ATA_CBL_NONE; - if (ap->flags & ATA_FLAG_SATA) - ap->cbl = ATA_CBL_SATA; for (i = 0; i < ATA_MAX_DEVICES; i++) { struct ata_device *dev = &ap->device[i]; @@ -5608,100 +5971,209 @@ void ata_port_init(struct ata_port *ap, struct ata_host *host, ap->stats.unhandled_irq = 1; ap->stats.idle_irq = 1; #endif + return ap; +} + +static void ata_host_release(struct device *gendev, void *res) +{ + struct ata_host *host = dev_get_drvdata(gendev); + int i; + + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; + + if (!ap) + continue; + + if ((host->flags & ATA_HOST_STARTED) && ap->ops->port_stop) + ap->ops->port_stop(ap); + } + + if ((host->flags & ATA_HOST_STARTED) && host->ops->host_stop) + host->ops->host_stop(host); + + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; + + if (!ap) + continue; - memcpy(&ap->ioaddr, &ent->port[port_no], sizeof(struct ata_ioports)); + if (ap->scsi_host) + scsi_host_put(ap->scsi_host); + + kfree(ap); + host->ports[i] = NULL; + } + + dev_set_drvdata(gendev, NULL); } /** - * ata_port_init_shost - Initialize SCSI host associated with ATA port - * @ap: ATA port to initialize SCSI host for - * @shost: SCSI host associated with @ap + * ata_host_alloc - allocate and init basic ATA host resources + * @dev: generic device this host is associated with + * @max_ports: maximum number of ATA ports associated with this host + * + * Allocate and initialize basic ATA host resources. LLD calls + * this function to allocate a host, initializes it fully and + * attaches it using ata_host_register(). * - * Initialize SCSI host @shost associated with ATA port @ap. + * @max_ports ports are allocated and host->n_ports is + * initialized to @max_ports. The caller is allowed to decrease + * host->n_ports before calling ata_host_register(). The unused + * ports will be automatically freed on registration. + * + * RETURNS: + * Allocate ATA host on success, NULL on failure. * * LOCKING: - * Inherited from caller. + * Inherited from calling layer (may sleep). */ -static void ata_port_init_shost(struct ata_port *ap, struct Scsi_Host *shost) +struct ata_host *ata_host_alloc(struct device *dev, int max_ports) { - ap->scsi_host = shost; + struct ata_host *host; + size_t sz; + int i; + + DPRINTK("ENTER\n"); + + if (!devres_open_group(dev, NULL, GFP_KERNEL)) + return NULL; - shost->unique_id = ap->print_id; - shost->max_id = 16; - shost->max_lun = 1; - shost->max_channel = 1; - shost->max_cmd_len = 12; + /* alloc a container for our list of ATA ports (buses) */ + sz = sizeof(struct ata_host) + (max_ports + 1) * sizeof(void *); + /* alloc a container for our list of ATA ports (buses) */ + host = devres_alloc(ata_host_release, sz, GFP_KERNEL); + if (!host) + goto err_out; + + devres_add(dev, host); + dev_set_drvdata(dev, host); + + spin_lock_init(&host->lock); + host->dev = dev; + host->n_ports = max_ports; + + /* allocate ports bound to this host */ + for (i = 0; i < max_ports; i++) { + struct ata_port *ap; + + ap = ata_port_alloc(host); + if (!ap) + goto err_out; + + ap->port_no = i; + host->ports[i] = ap; + } + + devres_remove_group(dev, NULL); + return host; + + err_out: + devres_release_group(dev, NULL); + return NULL; } /** - * ata_port_add - Attach low-level ATA driver to system - * @ent: Information provided by low-level driver - * @host: Collections of ports to which we add - * @port_no: Port number associated with this host - * - * Attach low-level ATA driver to system. + * ata_host_alloc_pinfo - alloc host and init with port_info array + * @dev: generic device this host is associated with + * @ppi: array of ATA port_info to initialize host with + * @n_ports: number of ATA ports attached to this host * - * LOCKING: - * PCI/etc. bus probe sem. + * Allocate ATA host and initialize with info from @ppi. If NULL + * terminated, @ppi may contain fewer entries than @n_ports. The + * last entry will be used for the remaining ports. * * RETURNS: - * New ata_port on success, for NULL on error. + * Allocate ATA host on success, NULL on failure. + * + * LOCKING: + * Inherited from calling layer (may sleep). */ -static struct ata_port * ata_port_add(const struct ata_probe_ent *ent, - struct ata_host *host, - unsigned int port_no) +struct ata_host *ata_host_alloc_pinfo(struct device *dev, + const struct ata_port_info * const * ppi, + int n_ports) { - struct Scsi_Host *shost; - struct ata_port *ap; - - DPRINTK("ENTER\n"); + const struct ata_port_info *pi; + struct ata_host *host; + int i, j; - if (!ent->port_ops->error_handler && - !(ent->port_flags & (ATA_FLAG_SATA_RESET | ATA_FLAG_SRST))) { - printk(KERN_ERR "ata%u: no reset mechanism available\n", - port_no); + host = ata_host_alloc(dev, n_ports); + if (!host) return NULL; - } - shost = scsi_host_alloc(ent->sht, sizeof(struct ata_port)); - if (!shost) - return NULL; + for (i = 0, j = 0, pi = NULL; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; - shost->transportt = &ata_scsi_transport_template; + if (ppi[j]) + pi = ppi[j++]; - ap = ata_shost_to_port(shost); + ap->pio_mask = pi->pio_mask; + ap->mwdma_mask = pi->mwdma_mask; + ap->udma_mask = pi->udma_mask; + ap->flags |= pi->flags; + ap->ops = pi->port_ops; - ata_port_init(ap, host, ent, port_no); - ata_port_init_shost(ap, shost); + if (!host->ops && (pi->port_ops != &ata_dummy_port_ops)) + host->ops = pi->port_ops; + if (!host->private_data && pi->private_data) + host->private_data = pi->private_data; + } - return ap; + return host; } -static void ata_host_release(struct device *gendev, void *res) +/** + * ata_host_start - start and freeze ports of an ATA host + * @host: ATA host to start ports for + * + * Start and then freeze ports of @host. Started status is + * recorded in host->flags, so this function can be called + * multiple times. Ports are guaranteed to get started only + * once. If host->ops isn't initialized yet, its set to the + * first non-dummy port ops. + * + * LOCKING: + * Inherited from calling layer (may sleep). + * + * RETURNS: + * 0 if all ports are started successfully, -errno otherwise. + */ +int ata_host_start(struct ata_host *host) { - struct ata_host *host = dev_get_drvdata(gendev); - int i; + int i, rc; + + if (host->flags & ATA_HOST_STARTED) + return 0; for (i = 0; i < host->n_ports; i++) { struct ata_port *ap = host->ports[i]; - if (ap && ap->ops->port_stop) - ap->ops->port_stop(ap); + if (!host->ops && !ata_port_is_dummy(ap)) + host->ops = ap->ops; + + if (ap->ops->port_start) { + rc = ap->ops->port_start(ap); + if (rc) { + ata_port_printk(ap, KERN_ERR, "failed to " + "start port (errno=%d)\n", rc); + goto err_out; + } + } + + ata_eh_freeze_port(ap); } - if (host->ops->host_stop) - host->ops->host_stop(host); + host->flags |= ATA_HOST_STARTED; + return 0; - for (i = 0; i < host->n_ports; i++) { + err_out: + while (--i >= 0) { struct ata_port *ap = host->ports[i]; - if (ap) - scsi_host_put(ap->scsi_host); - - host->ports[i] = NULL; + if (ap->ops->port_stop) + ap->ops->port_stop(ap); } - - dev_set_drvdata(gendev, NULL); + return rc; } /** @@ -5715,7 +6187,7 @@ static void ata_host_release(struct device *gendev, void *res) * PCI/etc. bus probe sem. * */ - +/* KILLME - the only user left is ipr */ void ata_host_init(struct ata_host *host, struct device *dev, unsigned long flags, const struct ata_port_operations *ops) { @@ -5726,155 +6198,95 @@ void ata_host_init(struct ata_host *host, struct device *dev, } /** - * ata_device_add - Register hardware device with ATA and SCSI layers - * @ent: Probe information describing hardware device to be registered + * ata_host_register - register initialized ATA host + * @host: ATA host to register + * @sht: template for SCSI host * - * This function processes the information provided in the probe - * information struct @ent, allocates the necessary ATA and SCSI - * host information structures, initializes them, and registers - * everything with requisite kernel subsystems. - * - * This function requests irqs, probes the ATA bus, and probes - * the SCSI bus. + * Register initialized ATA host. @host is allocated using + * ata_host_alloc() and fully initialized by LLD. This function + * starts ports, registers @host with ATA and SCSI layers and + * probe registered devices. * * LOCKING: - * PCI/etc. bus probe sem. + * Inherited from calling layer (may sleep). * * RETURNS: - * Number of ports registered. Zero on error (no ports registered). + * 0 on success, -errno otherwise. */ -int ata_device_add(const struct ata_probe_ent *ent) +int ata_host_register(struct ata_host *host, struct scsi_host_template *sht) { - unsigned int i; - struct device *dev = ent->dev; - struct ata_host *host; - int rc; - - DPRINTK("ENTER\n"); + int i, rc; - if (ent->irq == 0) { - dev_printk(KERN_ERR, dev, "is not available: No interrupt assigned.\n"); - return 0; + /* host must have been started */ + if (!(host->flags & ATA_HOST_STARTED)) { + dev_printk(KERN_ERR, host->dev, + "BUG: trying to register unstarted host\n"); + WARN_ON(1); + return -EINVAL; } - if (!devres_open_group(dev, ata_device_add, GFP_KERNEL)) - return 0; + /* Blow away unused ports. This happens when LLD can't + * determine the exact number of ports to allocate at + * allocation time. + */ + for (i = host->n_ports; host->ports[i]; i++) + kfree(host->ports[i]); - /* alloc a container for our list of ATA ports (buses) */ - host = devres_alloc(ata_host_release, sizeof(struct ata_host) + - (ent->n_ports * sizeof(void *)), GFP_KERNEL); - if (!host) - goto err_out; - devres_add(dev, host); - dev_set_drvdata(dev, host); + /* give ports names and add SCSI hosts */ + for (i = 0; i < host->n_ports; i++) + host->ports[i]->print_id = ata_print_id++; - ata_host_init(host, dev, ent->_host_flags, ent->port_ops); - host->n_ports = ent->n_ports; - host->irq = ent->irq; - host->irq2 = ent->irq2; - host->iomap = ent->iomap; - host->private_data = ent->private_data; + rc = ata_scsi_add_hosts(host, sht); + if (rc) + return rc; - /* register each port bound to this device */ + /* set cable, sata_spd_limit and report */ for (i = 0; i < host->n_ports; i++) { - struct ata_port *ap; - unsigned long xfer_mode_mask; - int irq_line = ent->irq; - - ap = ata_port_add(ent, host, i); - host->ports[i] = ap; - if (!ap) - goto err_out; + struct ata_port *ap = host->ports[i]; + int irq_line; + u32 scontrol; + unsigned long xfer_mask; - /* dummy? */ - if (ent->dummy_port_mask & (1 << i)) { - ata_port_printk(ap, KERN_INFO, "DUMMY\n"); - ap->ops = &ata_dummy_port_ops; - continue; - } + /* set SATA cable type if still unset */ + if (ap->cbl == ATA_CBL_NONE && (ap->flags & ATA_FLAG_SATA)) + ap->cbl = ATA_CBL_SATA; - /* start port */ - rc = ap->ops->port_start(ap); - if (rc) { - host->ports[i] = NULL; - scsi_host_put(ap->scsi_host); - goto err_out; + /* init sata_spd_limit to the current value */ + if (sata_scr_read(ap, SCR_CONTROL, &scontrol) == 0) { + int spd = (scontrol >> 4) & 0xf; + ap->hw_sata_spd_limit &= (1 << spd) - 1; } + ap->sata_spd_limit = ap->hw_sata_spd_limit; - /* Report the secondary IRQ for second channel legacy */ - if (i == 1 && ent->irq2) - irq_line = ent->irq2; + /* report the secondary IRQ for second channel legacy */ + irq_line = host->irq; + if (i == 1 && host->irq2) + irq_line = host->irq2; - xfer_mode_mask =(ap->udma_mask << ATA_SHIFT_UDMA) | - (ap->mwdma_mask << ATA_SHIFT_MWDMA) | - (ap->pio_mask << ATA_SHIFT_PIO); + xfer_mask = ata_pack_xfermask(ap->pio_mask, ap->mwdma_mask, + ap->udma_mask); /* print per-port info to dmesg */ - ata_port_printk(ap, KERN_INFO, "%cATA max %s cmd 0x%p " - "ctl 0x%p bmdma 0x%p irq %d\n", - ap->flags & ATA_FLAG_SATA ? 'S' : 'P', - ata_mode_string(xfer_mode_mask), - ap->ioaddr.cmd_addr, - ap->ioaddr.ctl_addr, - ap->ioaddr.bmdma_addr, - irq_line); - - /* freeze port before requesting IRQ */ - ata_eh_freeze_port(ap); - } - - /* obtain irq, that may be shared between channels */ - rc = devm_request_irq(dev, ent->irq, ent->port_ops->irq_handler, - ent->irq_flags, DRV_NAME, host); - if (rc) { - dev_printk(KERN_ERR, dev, "irq %lu request failed: %d\n", - ent->irq, rc); - goto err_out; - } - - /* do we have a second IRQ for the other channel, eg legacy mode */ - if (ent->irq2) { - /* We will get weird core code crashes later if this is true - so trap it now */ - BUG_ON(ent->irq == ent->irq2); - - rc = devm_request_irq(dev, ent->irq2, - ent->port_ops->irq_handler, ent->irq_flags, - DRV_NAME, host); - if (rc) { - dev_printk(KERN_ERR, dev, "irq %lu request failed: %d\n", - ent->irq2, rc); - goto err_out; - } + if (!ata_port_is_dummy(ap)) + ata_port_printk(ap, KERN_INFO, "%cATA max %s cmd 0x%p " + "ctl 0x%p bmdma 0x%p irq %d\n", + ap->cbl == ATA_CBL_SATA ? 'S' : 'P', + ata_mode_string(xfer_mask), + ap->ioaddr.cmd_addr, + ap->ioaddr.ctl_addr, + ap->ioaddr.bmdma_addr, + irq_line); + else + ata_port_printk(ap, KERN_INFO, "DUMMY\n"); } - /* resource acquisition complete */ - devres_remove_group(dev, ata_device_add); - /* perform each probe synchronously */ DPRINTK("probe begin\n"); for (i = 0; i < host->n_ports; i++) { struct ata_port *ap = host->ports[i]; - u32 scontrol; int rc; - /* init sata_spd_limit to the current value */ - if (sata_scr_read(ap, SCR_CONTROL, &scontrol) == 0) { - int spd = (scontrol >> 4) & 0xf; - ap->hw_sata_spd_limit &= (1 << spd) - 1; - } - ap->sata_spd_limit = ap->hw_sata_spd_limit; - - rc = scsi_add_host(ap->scsi_host, dev); - if (rc) { - ata_port_printk(ap, KERN_ERR, "scsi_add_host failed\n"); - /* FIXME: do something useful here */ - /* FIXME: handle unconditional calls to - * scsi_scan_host and ata_host_remove, below, - * at the very least - */ - } - + /* probe */ if (ap->ops->error_handler) { struct ata_eh_info *ehi = &ap->eh_info; unsigned long flags; @@ -5919,16 +6331,52 @@ int ata_device_add(const struct ata_probe_ent *ent) ata_scsi_scan_host(ap); } - VPRINTK("EXIT, returning %u\n", ent->n_ports); - return ent->n_ports; /* success */ - - err_out: - devres_release_group(dev, ata_device_add); - VPRINTK("EXIT, returning %d\n", rc); return 0; } /** + * ata_host_activate - start host, request IRQ and register it + * @host: target ATA host + * @irq: IRQ to request + * @irq_handler: irq_handler used when requesting IRQ + * @irq_flags: irq_flags used when requesting IRQ + * @sht: scsi_host_template to use when registering the host + * + * After allocating an ATA host and initializing it, most libata + * LLDs perform three steps to activate the host - start host, + * request IRQ and register it. This helper takes necessasry + * arguments and performs the three steps in one go. + * + * LOCKING: + * Inherited from calling layer (may sleep). + * + * RETURNS: + * 0 on success, -errno otherwise. + */ +int ata_host_activate(struct ata_host *host, int irq, + irq_handler_t irq_handler, unsigned long irq_flags, + struct scsi_host_template *sht) +{ + int rc; + + rc = ata_host_start(host); + if (rc) + return rc; + + rc = devm_request_irq(host->dev, irq, irq_handler, irq_flags, + dev_driver_string(host->dev), host); + if (rc) + return rc; + + rc = ata_host_register(host, sht); + /* if failed, just free the IRQ and leave ports alone */ + if (rc) + devm_free_irq(host->dev, irq, host); + + return rc; +} + +/** * ata_port_detach - Detach ATA port in prepration of device removal * @ap: ATA port to be detached * @@ -6003,32 +6451,6 @@ void ata_host_detach(struct ata_host *host) ata_port_detach(host->ports[i]); } -struct ata_probe_ent * -ata_probe_ent_alloc(struct device *dev, const struct ata_port_info *port) -{ - struct ata_probe_ent *probe_ent; - - probe_ent = devm_kzalloc(dev, sizeof(*probe_ent), GFP_KERNEL); - if (!probe_ent) { - printk(KERN_ERR DRV_NAME "(%s): out of memory\n", - kobject_name(&(dev->kobj))); - return NULL; - } - - INIT_LIST_HEAD(&probe_ent->node); - probe_ent->dev = dev; - - probe_ent->sht = port->sht; - probe_ent->port_flags = port->flags; - probe_ent->pio_mask = port->pio_mask; - probe_ent->mwdma_mask = port->mwdma_mask; - probe_ent->udma_mask = port->udma_mask; - probe_ent->port_ops = port->port_ops; - probe_ent->private_data = port->private_data; - - return probe_ent; -} - /** * ata_std_ports - initialize ioaddr with standard port offsets. * @ioaddr: IO address structure to be initialized @@ -6294,6 +6716,10 @@ const struct ata_port_operations ata_dummy_port_ops = { .port_stop = ata_dummy_noret, }; +const struct ata_port_info ata_dummy_port_info = { + .port_ops = &ata_dummy_port_ops, +}; + /* * libata is essentially a library of internal helper functions for * low-level ATA host controller drivers. As such, the API/ABI is @@ -6305,10 +6731,15 @@ EXPORT_SYMBOL_GPL(sata_deb_timing_normal); EXPORT_SYMBOL_GPL(sata_deb_timing_hotplug); EXPORT_SYMBOL_GPL(sata_deb_timing_long); EXPORT_SYMBOL_GPL(ata_dummy_port_ops); +EXPORT_SYMBOL_GPL(ata_dummy_port_info); EXPORT_SYMBOL_GPL(ata_std_bios_param); EXPORT_SYMBOL_GPL(ata_std_ports); EXPORT_SYMBOL_GPL(ata_host_init); -EXPORT_SYMBOL_GPL(ata_device_add); +EXPORT_SYMBOL_GPL(ata_host_alloc); +EXPORT_SYMBOL_GPL(ata_host_alloc_pinfo); +EXPORT_SYMBOL_GPL(ata_host_start); +EXPORT_SYMBOL_GPL(ata_host_register); +EXPORT_SYMBOL_GPL(ata_host_activate); EXPORT_SYMBOL_GPL(ata_host_detach); EXPORT_SYMBOL_GPL(ata_sg_init); EXPORT_SYMBOL_GPL(ata_sg_init_one); @@ -6320,6 +6751,7 @@ EXPORT_SYMBOL_GPL(ata_tf_load); EXPORT_SYMBOL_GPL(ata_tf_read); EXPORT_SYMBOL_GPL(ata_noop_dev_select); EXPORT_SYMBOL_GPL(ata_std_dev_select); +EXPORT_SYMBOL_GPL(sata_print_link_status); EXPORT_SYMBOL_GPL(ata_tf_to_fis); EXPORT_SYMBOL_GPL(ata_tf_from_fis); EXPORT_SYMBOL_GPL(ata_check_status); @@ -6327,6 +6759,7 @@ EXPORT_SYMBOL_GPL(ata_altstatus); EXPORT_SYMBOL_GPL(ata_exec_command); EXPORT_SYMBOL_GPL(ata_port_start); EXPORT_SYMBOL_GPL(ata_interrupt); +EXPORT_SYMBOL_GPL(ata_do_set_mode); EXPORT_SYMBOL_GPL(ata_data_xfer); EXPORT_SYMBOL_GPL(ata_data_xfer_noirq); EXPORT_SYMBOL_GPL(ata_qc_prep); @@ -6389,7 +6822,8 @@ EXPORT_SYMBOL_GPL(ata_timing_merge); #ifdef CONFIG_PCI EXPORT_SYMBOL_GPL(pci_test_config_bits); -EXPORT_SYMBOL_GPL(ata_pci_init_native_mode); +EXPORT_SYMBOL_GPL(ata_pci_init_native_host); +EXPORT_SYMBOL_GPL(ata_pci_prepare_native_host); EXPORT_SYMBOL_GPL(ata_pci_init_one); EXPORT_SYMBOL_GPL(ata_pci_remove_one); #ifdef CONFIG_PM @@ -6421,3 +6855,8 @@ EXPORT_SYMBOL_GPL(ata_dummy_irq_on); EXPORT_SYMBOL_GPL(ata_irq_ack); EXPORT_SYMBOL_GPL(ata_dummy_irq_ack); EXPORT_SYMBOL_GPL(ata_dev_try_classify); + +EXPORT_SYMBOL_GPL(ata_cable_40wire); +EXPORT_SYMBOL_GPL(ata_cable_80wire); +EXPORT_SYMBOL_GPL(ata_cable_unknown); +EXPORT_SYMBOL_GPL(ata_cable_sata); |