diff options
Diffstat (limited to 'drivers/ata/libata-eh.c')
| -rw-r--r-- | drivers/ata/libata-eh.c | 94 |
1 files changed, 94 insertions, 0 deletions
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index bba2ae5df1c..0ea97c942ce 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -110,6 +110,13 @@ static const unsigned long ata_eh_identify_timeouts[] = { ULONG_MAX, }; +static const unsigned long ata_eh_flush_timeouts[] = { + 15000, /* be generous with flush */ + 15000, /* ditto */ + 30000, /* and even more generous */ + ULONG_MAX, +}; + static const unsigned long ata_eh_other_timeouts[] = { 5000, /* same rationale as identify timeout */ 10000, /* ditto */ @@ -147,6 +154,8 @@ ata_eh_cmd_timeout_table[ATA_EH_CMD_TIMEOUT_TABLE_SIZE] = { .timeouts = ata_eh_other_timeouts, }, { .commands = CMDS(ATA_CMD_INIT_DEV_PARAMS), .timeouts = ata_eh_other_timeouts, }, + { .commands = CMDS(ATA_CMD_FLUSH, ATA_CMD_FLUSH_EXT), + .timeouts = ata_eh_flush_timeouts }, }; #undef CMDS @@ -3112,6 +3121,82 @@ static int atapi_eh_clear_ua(struct ata_device *dev) return 0; } +/** + * ata_eh_maybe_retry_flush - Retry FLUSH if necessary + * @dev: ATA device which may need FLUSH retry + * + * If @dev failed FLUSH, it needs to be reported upper layer + * immediately as it means that @dev failed to remap and already + * lost at least a sector and further FLUSH retrials won't make + * any difference to the lost sector. However, if FLUSH failed + * for other reasons, for example transmission error, FLUSH needs + * to be retried. + * + * This function determines whether FLUSH failure retry is + * necessary and performs it if so. + * + * RETURNS: + * 0 if EH can continue, -errno if EH needs to be repeated. + */ +static int ata_eh_maybe_retry_flush(struct ata_device *dev) +{ + struct ata_link *link = dev->link; + struct ata_port *ap = link->ap; + struct ata_queued_cmd *qc; + struct ata_taskfile tf; + unsigned int err_mask; + int rc = 0; + + /* did flush fail for this device? */ + if (!ata_tag_valid(link->active_tag)) + return 0; + + qc = __ata_qc_from_tag(ap, link->active_tag); + if (qc->dev != dev || (qc->tf.command != ATA_CMD_FLUSH_EXT && + qc->tf.command != ATA_CMD_FLUSH)) + return 0; + + /* if the device failed it, it should be reported to upper layers */ + if (qc->err_mask & AC_ERR_DEV) + return 0; + + /* flush failed for some other reason, give it another shot */ + ata_tf_init(dev, &tf); + + tf.command = qc->tf.command; + tf.flags |= ATA_TFLAG_DEVICE; + tf.protocol = ATA_PROT_NODATA; + + ata_dev_printk(dev, KERN_WARNING, "retrying FLUSH 0x%x Emask 0x%x\n", + tf.command, qc->err_mask); + + err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0); + if (!err_mask) { + /* + * FLUSH is complete but there's no way to + * successfully complete a failed command from EH. + * Making sure retry is allowed at least once and + * retrying it should do the trick - whatever was in + * the cache is already on the platter and this won't + * cause infinite loop. + */ + qc->scsicmd->allowed = max(qc->scsicmd->allowed, 1); + } else { + ata_dev_printk(dev, KERN_WARNING, "FLUSH failed Emask 0x%x\n", + err_mask); + rc = -EIO; + + /* if device failed it, report it to upper layers */ + if (err_mask & AC_ERR_DEV) { + qc->err_mask |= AC_ERR_DEV; + qc->result_tf = tf; + if (!(ap->pflags & ATA_PFLAG_FROZEN)) + rc = 0; + } + } + return rc; +} + static int ata_link_nr_enabled(struct ata_link *link) { struct ata_device *dev; @@ -3455,6 +3540,15 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, } } + /* retry flush if necessary */ + ata_for_each_dev(dev, link, ALL) { + if (dev->class != ATA_DEV_ATA) + continue; + rc = ata_eh_maybe_retry_flush(dev); + if (rc) + goto dev_fail; + } + /* configure link power saving */ if (ehc->i.action & ATA_EH_LPM) ata_for_each_dev(dev, link, ALL) |